Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

4193 files changed, 871456 insertions, 0 deletions

diff --git a/roms/u-boot/arch/arm/Kconfig b/roms/u-boot/arch/arm/Kconfig
new file mode 100644
index 000000000..0448787b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/Kconfig
@@ -0,0 +1,2051 @@
+menu "ARM architecture"
+	depends on ARM
+
+config SYS_ARCH
+	default "arm"
+
+config ARM64
+	bool
+	select PHYS_64BIT
+	select SYS_CACHE_SHIFT_6
+
+if ARM64
+config POSITION_INDEPENDENT
+	bool "Generate position-independent pre-relocation code"
+	help
+	  U-Boot expects to be linked to a specific hard-coded address, and to
+	  be loaded to and run from that address. This option lifts that
+	  restriction, thus allowing the code to be loaded to and executed from
+	  almost any 4K aligned address. This logic relies on the relocation
+	  information that is embedded in the binary to support U-Boot
+	  relocating itself to the top-of-RAM later during execution.
+
+config INIT_SP_RELATIVE
+	bool "Specify the early stack pointer relative to the .bss section"
+	default n if ARCH_QEMU
+	default y if POSITION_INDEPENDENT
+	help
+	  U-Boot typically uses a hard-coded value for the stack pointer
+	  before relocation. Enable this option to instead calculate the
+	  initial SP at run-time. This is useful to avoid hard-coding addresses
+	  into U-Boot, so that it can be loaded and executed at arbitrary
+	  addresses and thus avoid using arbitrary addresses at runtime.
+
+	  If this option is enabled, the early stack pointer is set to
+	  &_bss_start with a offset value added. The offset is specified by
+	  SYS_INIT_SP_BSS_OFFSET.
+
+config SYS_INIT_SP_BSS_OFFSET
+	int "Early stack offset from the .bss base address"
+	depends on INIT_SP_RELATIVE
+	default 524288
+	help
+	  This option's value is the offset added to &_bss_start in order to
+	  calculate the stack pointer. This offset should be large enough so
+	  that the early malloc region, global data (gd), and early stack usage
+	  do not overlap any appended DTB.
+
+config LINUX_KERNEL_IMAGE_HEADER
+	bool
+	help
+	  Place a Linux kernel image header at the start of the U-Boot binary.
+	  The format of the header is described in the Linux kernel source at
+	  Documentation/arm64/booting.txt. This feature is useful since the
+	  image header reports the amount of memory (BSS and similar) that
+	  U-Boot needs to use, but which isn't part of the binary.
+
+if LINUX_KERNEL_IMAGE_HEADER
+config LNX_KRNL_IMG_TEXT_OFFSET_BASE
+	hex
+	help
+	  The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
+	  TEXT_OFFSET value written to the Linux kernel image header.
+endif
+endif
+
+config GIC_V3_ITS
+	bool "ARM GICV3 ITS"
+	select REGMAP
+	select SYSCON
+	select IRQ
+	help
+	  ARM GICV3 Interrupt translation service (ITS).
+	  Basic support for programming locality specific peripheral
+	  interrupts (LPI) configuration tables and enable LPI tables.
+	  LPI configuration table can be used by u-boot or Linux.
+	  ARM GICV3 has limitation, once the LPI table is enabled, LPI
+	  configuration table can not be re-programmed, unless GICV3 reset.
+
+config STATIC_RELA
+	bool
+	default y if ARM64
+
+config DMA_ADDR_T_64BIT
+	bool
+	default y if ARM64
+
+config HAS_VBAR
+	bool
+
+config HAS_THUMB2
+	bool
+
+# Used for compatibility with asm files copied from the kernel
+config ARM_ASM_UNIFIED
+	bool
+	default y
+
+# Used for compatibility with asm files copied from the kernel
+config THUMB2_KERNEL
+	bool
+
+config SYS_ICACHE_OFF
+	bool "Do not enable icache"
+	default n
+	help
+	  Do not enable instruction cache in U-Boot.
+
+config SPL_SYS_ICACHE_OFF
+	bool "Do not enable icache in SPL"
+	depends on SPL
+	default SYS_ICACHE_OFF
+	help
+	  Do not enable instruction cache in SPL.
+
+config SYS_DCACHE_OFF
+	bool "Do not enable dcache"
+	default n
+	help
+	  Do not enable data cache in U-Boot.
+
+config SPL_SYS_DCACHE_OFF
+	bool "Do not enable dcache in SPL"
+	depends on SPL
+	default SYS_DCACHE_OFF
+	help
+	  Do not enable data cache in SPL.
+
+config SYS_ARM_CACHE_CP15
+	bool "CP15 based cache enabling support"
+	help
+	  Select this if your processor suports enabling caches by using
+	  CP15 registers.
+
+config SYS_ARM_MMU
+	bool "MMU-based Paged Memory Management Support"
+	select SYS_ARM_CACHE_CP15
+	help
+	  Select if you want MMU-based virtualised addressing space
+	  support via paged memory management.
+
+config SYS_ARM_MPU
+	bool 'Use the ARM v7 PMSA Compliant MPU'
+	help
+	  Some ARM systems without an MMU have instead a Memory Protection
+	  Unit (MPU) that defines the type and permissions for regions of
+	  memory.
+	  If your CPU has an MPU then you should choose 'y' here unless you
+	  know that you do not want to use the MPU.
+
+# If set, the workarounds for these ARM errata are applied early during U-Boot
+# startup. Note that in general these options force the workarounds to be
+# applied; no CPU-type/version detection exists, unlike the similar options in
+# the Linux kernel. Do not set these options unless they apply!  Also note that
+# the following can be machine-specific errata. These do have ability to
+# provide rudimentary version and machine-specific checks, but expect no
+# product checks:
+# CONFIG_ARM_ERRATA_430973
+# CONFIG_ARM_ERRATA_454179
+# CONFIG_ARM_ERRATA_621766
+# CONFIG_ARM_ERRATA_798870
+# CONFIG_ARM_ERRATA_801819
+# CONFIG_ARM_CORTEX_A8_CVE_2017_5715
+# CONFIG_ARM_CORTEX_A15_CVE_2017_5715
+
+config ARM_ERRATA_430973
+	bool
+
+config ARM_ERRATA_454179
+	bool
+
+config ARM_ERRATA_621766
+	bool
+
+config ARM_ERRATA_716044
+	bool
+
+config ARM_ERRATA_725233
+	bool
+
+config ARM_ERRATA_742230
+	bool
+
+config ARM_ERRATA_743622
+	bool
+
+config ARM_ERRATA_751472
+	bool
+
+config ARM_ERRATA_761320
+	bool
+
+config ARM_ERRATA_773022
+	bool
+
+config ARM_ERRATA_774769
+	bool
+
+config ARM_ERRATA_794072
+	bool
+
+config ARM_ERRATA_798870
+	bool
+
+config ARM_ERRATA_801819
+	bool
+
+config ARM_ERRATA_826974
+	bool
+
+config ARM_ERRATA_828024
+	bool
+
+config ARM_ERRATA_829520
+	bool
+
+config ARM_ERRATA_833069
+	bool
+
+config ARM_ERRATA_833471
+	bool
+
+config ARM_ERRATA_845369
+	bool
+
+config ARM_ERRATA_852421
+	bool
+
+config ARM_ERRATA_852423
+	bool
+
+config ARM_ERRATA_855873
+	bool
+
+config ARM_CORTEX_A8_CVE_2017_5715
+	bool
+
+config ARM_CORTEX_A15_CVE_2017_5715
+	bool
+
+config CPU_ARM720T
+	bool
+	select SYS_CACHE_SHIFT_5
+	imply SYS_ARM_MMU
+
+config CPU_ARM920T
+	bool
+	select SYS_CACHE_SHIFT_5
+	imply SYS_ARM_MMU
+
+config CPU_ARM926EJS
+	bool
+	select SYS_CACHE_SHIFT_5
+	imply SYS_ARM_MMU
+
+config CPU_ARM946ES
+	bool
+	select SYS_CACHE_SHIFT_5
+	imply SYS_ARM_MMU
+
+config CPU_ARM1136
+	bool
+	select SYS_CACHE_SHIFT_5
+	imply SYS_ARM_MMU
+
+config CPU_ARM1176
+	bool
+	select HAS_VBAR
+	select SYS_CACHE_SHIFT_5
+	imply SYS_ARM_MMU
+
+config CPU_V7A
+	bool
+	select HAS_THUMB2
+	select HAS_VBAR
+	select SYS_CACHE_SHIFT_6
+	imply SYS_ARM_MMU
+
+config CPU_V7M
+	bool
+	select HAS_THUMB2
+	select SYS_ARM_MPU
+	select SYS_CACHE_SHIFT_5
+	select SYS_THUMB_BUILD
+	select THUMB2_KERNEL
+
+config CPU_V7R
+	bool
+	select HAS_THUMB2
+	select SYS_ARM_CACHE_CP15
+	select SYS_ARM_MPU
+	select SYS_CACHE_SHIFT_6
+
+config CPU_PXA
+	bool
+	select SYS_CACHE_SHIFT_5
+	imply SYS_ARM_MMU
+
+config CPU_SA1100
+	bool
+	select SYS_CACHE_SHIFT_5
+	imply SYS_ARM_MMU
+
+config SYS_CPU
+	default "arm720t" if CPU_ARM720T
+	default "arm920t" if CPU_ARM920T
+	default "arm926ejs" if CPU_ARM926EJS
+	default "arm946es" if CPU_ARM946ES
+	default "arm1136" if CPU_ARM1136
+	default "arm1176" if CPU_ARM1176
+	default "armv7" if CPU_V7A
+	default "armv7" if CPU_V7R
+	default "armv7m" if CPU_V7M
+	default "pxa" if CPU_PXA
+	default "sa1100" if CPU_SA1100
+	default "armv8" if ARM64
+
+config SYS_ARM_ARCH
+	int
+	default 4 if CPU_ARM720T
+	default 4 if CPU_ARM920T
+	default 5 if CPU_ARM926EJS
+	default 5 if CPU_ARM946ES
+	default 6 if CPU_ARM1136
+	default 6 if CPU_ARM1176
+	default 7 if CPU_V7A
+	default 7 if CPU_V7M
+	default 7 if CPU_V7R
+	default 5 if CPU_PXA
+	default 4 if CPU_SA1100
+	default 8 if ARM64
+
+config SYS_CACHE_SHIFT_5
+	bool
+
+config SYS_CACHE_SHIFT_6
+	bool
+
+config SYS_CACHE_SHIFT_7
+	bool
+
+config SYS_CACHELINE_SIZE
+	int
+	default 128 if SYS_CACHE_SHIFT_7
+	default 64 if SYS_CACHE_SHIFT_6
+	default 32 if SYS_CACHE_SHIFT_5
+
+choice
+	prompt "Select the ARM data write cache policy"
+	default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || \
+					      CPU_PXA || RZA1
+	default SYS_ARM_CACHE_WRITEBACK
+
+config SYS_ARM_CACHE_WRITEBACK
+	bool "Write-back (WB)"
+	help
+	  A write updates the cache only and marks the cache line as dirty.
+	  External memory is updated only when the line is evicted or explicitly
+	  cleaned.
+
+config SYS_ARM_CACHE_WRITETHROUGH
+	bool "Write-through (WT)"
+	help
+	  A write updates both the cache and the external memory system.
+	  This does not mark the cache line as dirty.
+
+config SYS_ARM_CACHE_WRITEALLOC
+	bool "Write allocation (WA)"
+	help
+	  A cache line is allocated on a write miss. This means that executing a
+	  store instruction on the processor might cause a burst read to occur.
+	  There is a linefill to obtain the data for the cache line, before the
+	  write is performed.
+endchoice
+
+config ARCH_CPU_INIT
+	bool "Enable ARCH_CPU_INIT"
+	help
+	  Some architectures require a call to arch_cpu_init().
+	  Say Y here to enable it
+
+config SYS_ARCH_TIMER
+	bool "ARM Generic Timer support"
+	depends on CPU_V7A || ARM64
+	default y if ARM64
+	help
+	  The ARM Generic Timer (aka arch-timer) provides an architected
+	  interface to a timer source on an SoC.
+	  It is mandatory for ARMv8 implementation and widely available
+	  on ARMv7 systems.
+
+config ARM_SMCCC
+	bool "Support for ARM SMC Calling Convention (SMCCC)"
+	depends on CPU_V7A || ARM64
+	select ARM_PSCI_FW
+	help
+	  Say Y here if you want to enable ARM SMC Calling Convention.
+	  This should be enabled if U-Boot needs to communicate with system
+	  firmware (for example, PSCI) according to SMCCC.
+
+config SEMIHOSTING
+	bool "support boot from semihosting"
+	help
+	  In emulated environments, semihosting is a way for
+	  the hosted environment to call out to the emulator to
+	  retrieve files from the host machine.
+
+config SYS_THUMB_BUILD
+	bool "Build U-Boot using the Thumb instruction set"
+	depends on !ARM64
+	help
+	   Use this flag to build U-Boot using the Thumb instruction set for
+	   ARM architectures. Thumb instruction set provides better code
+	   density. For ARM architectures that support Thumb2 this flag will
+	   result in Thumb2 code generated by GCC.
+
+config SPL_SYS_THUMB_BUILD
+	bool "Build SPL using the Thumb instruction set"
+	default y if SYS_THUMB_BUILD
+	depends on !ARM64 && SPL
+	help
+	   Use this flag to build SPL using the Thumb instruction set for
+	   ARM architectures. Thumb instruction set provides better code
+	   density. For ARM architectures that support Thumb2 this flag will
+	   result in Thumb2 code generated by GCC.
+
+config TPL_SYS_THUMB_BUILD
+	bool "Build TPL using the Thumb instruction set"
+	default y if SYS_THUMB_BUILD
+	depends on TPL && !ARM64
+	help
+	   Use this flag to build TPL using the Thumb instruction set for
+	   ARM architectures. Thumb instruction set provides better code
+	   density. For ARM architectures that support Thumb2 this flag will
+	   result in Thumb2 code generated by GCC.
+
+
+config SYS_L2CACHE_OFF
+	bool "L2cache off"
+	help
+	  If SoC does not support L2CACHE or one does not want to enable
+	  L2CACHE, choose this option.
+
+config ENABLE_ARM_SOC_BOOT0_HOOK
+	bool "prepare BOOT0 header"
+	help
+	  If the SoC's BOOT0 requires a header area filled with (magic)
+	  values, then choose this option, and create a file included as
+	  <asm/arch/boot0.h> which contains the required assembler code.
+
+config ARM_CORTEX_CPU_IS_UP
+	bool
+	default n
+
+config USE_ARCH_MEMCPY
+	bool "Use an assembly optimized implementation of memcpy"
+	default y
+	depends on !ARM64
+	help
+	  Enable the generation of an optimized version of memcpy.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config SPL_USE_ARCH_MEMCPY
+	bool "Use an assembly optimized implementation of memcpy for SPL"
+	default y if USE_ARCH_MEMCPY
+	depends on !ARM64 && SPL
+	help
+	  Enable the generation of an optimized version of memcpy.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config TPL_USE_ARCH_MEMCPY
+	bool "Use an assembly optimized implementation of memcpy for TPL"
+	default y if USE_ARCH_MEMCPY
+	depends on !ARM64 && TPL
+	help
+	  Enable the generation of an optimized version of memcpy.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config USE_ARCH_MEMSET
+	bool "Use an assembly optimized implementation of memset"
+	default y
+	depends on !ARM64
+	help
+	  Enable the generation of an optimized version of memset.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config SPL_USE_ARCH_MEMSET
+	bool "Use an assembly optimized implementation of memset for SPL"
+	default y if USE_ARCH_MEMSET
+	depends on !ARM64 && SPL
+	help
+	  Enable the generation of an optimized version of memset.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config TPL_USE_ARCH_MEMSET
+	bool "Use an assembly optimized implementation of memset for TPL"
+	default y if USE_ARCH_MEMSET
+	depends on !ARM64 && TPL
+	help
+	  Enable the generation of an optimized version of memset.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config ARM64_SUPPORT_AARCH32
+	bool "ARM64 system support AArch32 execution state"
+	depends on ARM64
+	default y if !TARGET_THUNDERX_88XX
+	help
+	  This ARM64 system supports AArch32 execution state.
+
+choice
+	prompt "Target select"
+	default TARGET_HIKEY
+
+config ARCH_AT91
+	bool "Atmel AT91"
+	select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
+	select SPL_SEPARATE_BSS if SPL
+
+config TARGET_EDB93XX
+	bool "Support edb93xx"
+	select CPU_ARM920T
+	select PL010_SERIAL
+
+config TARGET_ASPENITE
+	bool "Support aspenite"
+	select CPU_ARM926EJS
+
+config TARGET_GPLUGD
+	bool "Support gplugd"
+	select CPU_ARM926EJS
+
+config ARCH_DAVINCI
+	bool "TI DaVinci"
+	select CPU_ARM926EJS
+	select SPL_DM_SPI if SPL
+	imply CMD_SAVES
+	help
+	  Support for TI's DaVinci platform.
+
+config ARCH_KIRKWOOD
+	bool "Marvell Kirkwood"
+	select ARCH_MISC_INIT
+	select BOARD_EARLY_INIT_F
+	select CPU_ARM926EJS
+
+config ARCH_MVEBU
+	bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
+	select DM
+	select DM_ETH
+	select DM_SERIAL
+	select DM_SPI
+	select DM_SPI_FLASH
+	select SPL_DM_SPI if SPL
+	select SPL_DM_SPI_FLASH if SPL
+	select OF_CONTROL
+	select OF_SEPARATE
+	select SPI
+	imply CMD_DM
+
+config ARCH_ORION5X
+	bool "Marvell Orion"
+	select CPU_ARM926EJS
+
+config TARGET_SPEAR300
+	bool "Support spear300"
+	select BOARD_EARLY_INIT_F
+	select CPU_ARM926EJS
+	select PL011_SERIAL
+	imply CMD_SAVES
+
+config TARGET_SPEAR310
+	bool "Support spear310"
+	select BOARD_EARLY_INIT_F
+	select CPU_ARM926EJS
+	select PL011_SERIAL
+	imply CMD_SAVES
+
+config TARGET_SPEAR320
+	bool "Support spear320"
+	select BOARD_EARLY_INIT_F
+	select CPU_ARM926EJS
+	select PL011_SERIAL
+	imply CMD_SAVES
+
+config TARGET_SPEAR600
+	bool "Support spear600"
+	select BOARD_EARLY_INIT_F
+	select CPU_ARM926EJS
+	select PL011_SERIAL
+	imply CMD_SAVES
+
+config TARGET_STV0991
+	bool "Support stv0991"
+	select CPU_V7A
+	select DM
+	select DM_SERIAL
+	select DM_SPI
+	select DM_SPI_FLASH
+	select PL01X_SERIAL
+	select SPI
+	select SPI_FLASH
+	imply CMD_DM
+
+config TARGET_X600
+	bool "Support x600"
+	select BOARD_LATE_INIT
+	select CPU_ARM926EJS
+	select PL011_SERIAL
+	select SUPPORT_SPL
+
+config TARGET_FLEA3
+	bool "Support flea3"
+	select CPU_ARM1136
+
+config ARCH_BCM283X
+	bool "Broadcom BCM283X family"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select OF_CONTROL
+	select PL01X_SERIAL
+	select SERIAL_SEARCH_ALL
+	imply CMD_DM
+	imply FAT_WRITE
+
+config ARCH_BCM63158
+	bool "Broadcom BCM63158 family"
+	select DM
+	select OF_CONTROL
+	imply CMD_DM
+
+config ARCH_BCM68360
+	bool "Broadcom BCM68360 family"
+	select DM
+	select OF_CONTROL
+	imply CMD_DM
+
+config ARCH_BCM6858
+	bool "Broadcom BCM6858 family"
+	select DM
+	select OF_CONTROL
+	imply CMD_DM
+
+config ARCH_BCMSTB
+	bool "Broadcom BCM7XXX family"
+	select CPU_V7A
+	select DM
+	select OF_CONTROL
+	select OF_PRIOR_STAGE
+	imply CMD_DM
+	help
+	  This enables support for Broadcom ARM-based set-top box
+	  chipsets, including the 7445 family of chips.
+
+config TARGET_BCMCYGNUS
+	bool "Support bcmcygnus"
+	select CPU_V7A
+	imply BCM_SF2_ETH
+	imply BCM_SF2_ETH_GMAC
+	imply CMD_HASH
+	imply CRC32_VERIFY
+	imply FAT_WRITE
+	imply HASH_VERIFY
+	imply NETDEVICES
+
+config TARGET_BCMNS2
+	bool "Support Broadcom Northstar2"
+	select ARM64
+	help
+	  Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
+	  ARMv8 Cortex-A57 processors targeting a broad range of networking
+	  applications.
+
+config TARGET_BCMNS3
+	bool "Support Broadcom NS3"
+	select ARM64
+	select BOARD_LATE_INIT
+	help
+	  Support for Broadcom Northstar 3 SoCs. NS3 is a octo-core 64-bit
+	  ARMv8 Cortex-A72 processors targeting a broad range of networking
+	  applications.
+
+config ARCH_EXYNOS
+	bool "Samsung EXYNOS"
+	select DM
+	select DM_GPIO
+	select DM_I2C
+	select DM_KEYBOARD
+	select DM_SERIAL
+	select DM_SPI
+	select DM_SPI_FLASH
+	select SPI
+	imply SYS_THUMB_BUILD
+	imply CMD_DM
+	imply FAT_WRITE
+
+config ARCH_S5PC1XX
+	bool "Samsung S5PC1XX"
+	select CPU_V7A
+	select DM
+	select DM_GPIO
+	select DM_I2C
+	select DM_SERIAL
+	imply CMD_DM
+
+config ARCH_HIGHBANK
+	bool "Calxeda Highbank"
+	select CPU_V7A
+	select PL01X_SERIAL
+	select DM
+	select DM_SERIAL
+	select OF_CONTROL
+	select OF_BOARD
+	select CLK
+	select CLK_CCF
+	select AHCI
+	select DM_ETH
+	select PHYS_64BIT
+
+config ARCH_INTEGRATOR
+	bool "ARM Ltd. Integrator family"
+	select DM
+	select DM_SERIAL
+	select PL01X_SERIAL
+	imply CMD_DM
+
+config ARCH_IPQ40XX
+	bool "Qualcomm IPQ40xx SoCs"
+	select CPU_V7A
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select DM_RESET
+	select MSM_SMEM
+	select PINCTRL
+	select CLK
+	select SMEM
+	select OF_CONTROL
+	imply CMD_DM
+
+config ARCH_KEYSTONE
+	bool "TI Keystone"
+	select CMD_POWEROFF
+	select CPU_V7A
+	select SUPPORT_SPL
+	select SYS_ARCH_TIMER
+	select SYS_THUMB_BUILD
+	imply CMD_MTDPARTS
+	imply CMD_SAVES
+	imply FIT
+
+config ARCH_K3
+	bool "Texas Instruments' K3 Architecture"
+	select SPL
+	select SUPPORT_SPL
+	select FIT
+
+config ARCH_OMAP2PLUS
+	bool "TI OMAP2+"
+	select CPU_V7A
+	select SPL_BOARD_INIT if SPL
+	select SPL_STACK_R if SPL
+	select SUPPORT_SPL
+	imply TI_SYSC if DM && OF_CONTROL
+	imply FIT
+
+config ARCH_MESON
+	bool "Amlogic Meson"
+	imply DISTRO_DEFAULTS
+	imply DM_RNG
+	help
+	  Support for the Meson SoC family developed by Amlogic Inc.,
+	  targeted at media players and tablet computers. We currently
+	  support the S905 (GXBaby) 64-bit SoC.
+
+config ARCH_MEDIATEK
+	bool "MediaTek SoCs"
+	select DM
+	select OF_CONTROL
+	select SPL_DM if SPL
+	select SPL_LIBCOMMON_SUPPORT if SPL
+	select SPL_LIBGENERIC_SUPPORT if SPL
+	select SPL_OF_CONTROL if SPL
+	select SUPPORT_SPL
+	help
+	  Support for the MediaTek SoCs family developed by MediaTek Inc.
+	  Please refer to doc/README.mediatek for more information.
+
+config ARCH_LPC32XX
+	bool "NXP LPC32xx platform"
+	select CPU_ARM926EJS
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select SPL_DM if SPL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config ARCH_IMX8
+	bool "NXP i.MX8 platform"
+	select ARM64
+	select DM
+	select OF_CONTROL
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+
+config ARCH_IMX8M
+	bool "NXP i.MX8M platform"
+	select ARM64
+	select SYS_FSL_HAS_SEC if IMX_HAB
+	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SEC_LE
+	select DM
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config ARCH_IMXRT
+	bool "NXP i.MXRT platform"
+	select CPU_V7M
+	select DM
+	select DM_SERIAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config ARCH_MX23
+	bool "NXP i.MX23 family"
+	select CPU_ARM926EJS
+	select PL011_SERIAL
+	select SUPPORT_SPL
+
+config ARCH_MX25
+	bool "NXP MX25"
+	select CPU_ARM926EJS
+	imply MXC_GPIO
+
+config ARCH_MX28
+	bool "NXP i.MX28 family"
+	select CPU_ARM926EJS
+	select PL011_SERIAL
+	select SUPPORT_SPL
+
+config ARCH_MX31
+	bool "NXP i.MX31 family"
+	select CPU_ARM1136
+
+config ARCH_MX7ULP
+	bool "NXP MX7ULP"
+	select CPU_V7A
+	select SYS_FSL_HAS_SEC if IMX_HAB
+	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SEC_LE
+	select ROM_UNIFIED_SECTIONS
+	imply MXC_GPIO
+	imply SYS_THUMB_BUILD
+
+config ARCH_MX7
+	bool "Freescale MX7"
+	select ARCH_MISC_INIT
+	select CPU_V7A
+	select SYS_FSL_HAS_SEC if IMX_HAB
+	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SEC_LE
+	imply BOARD_EARLY_INIT_F
+	imply MXC_GPIO
+	imply SYS_THUMB_BUILD
+
+config ARCH_MX6
+	bool "Freescale MX6"
+	select CPU_V7A
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SEC_LE
+	imply MXC_GPIO
+	imply SYS_THUMB_BUILD
+
+if ARCH_MX6
+config SPL_LDSCRIPT
+	default "arch/arm/mach-omap2/u-boot-spl.lds"
+endif
+
+config ARCH_MX5
+	bool "Freescale MX5"
+	select BOARD_EARLY_INIT_F
+	select CPU_V7A
+	imply MXC_GPIO
+
+config ARCH_NEXELL
+	bool "Nexell S5P4418/S5P6818 SoC"
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+	select DM
+
+config ARCH_OWL
+	bool "Actions Semi OWL SoCs"
+	select DM
+	select DM_ETH
+	select DM_SERIAL
+	select OWL_SERIAL
+	select CLK
+	select CLK_OWL
+	select OF_CONTROL
+	select SYS_RELOC_GD_ENV_ADDR
+	imply CMD_DM
+
+config ARCH_QEMU
+	bool "QEMU Virtual Platform"
+	select DM
+	select DM_SERIAL
+	select OF_CONTROL
+	select PL01X_SERIAL
+	imply CMD_DM
+	imply DM_RNG
+	imply DM_RTC
+	imply RTC_PL031
+
+config ARCH_RMOBILE
+	bool "Renesas ARM SoCs"
+	select DM
+	select DM_SERIAL
+	imply BOARD_EARLY_INIT_F
+	imply CMD_DM
+	imply FAT_WRITE
+	imply SYS_THUMB_BUILD
+	imply ARCH_MISC_INIT if DISPLAY_CPUINFO
+
+config ARCH_SNAPDRAGON
+	bool "Qualcomm Snapdragon SoCs"
+	select ARM64
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select MSM_SMEM
+	select OF_CONTROL
+	select OF_SEPARATE
+	select SMEM
+	select SPMI
+	imply CMD_DM
+
+config ARCH_SOCFPGA
+	bool "Altera SOCFPGA family"
+	select ARCH_EARLY_INIT_R
+	select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
+	select ARM64 if TARGET_SOCFPGA_SOC64
+	select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
+	select DM
+	select DM_SERIAL
+	select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
+	select OF_CONTROL
+	select SPL_DM_RESET if DM_RESET
+	select SPL_DM_SERIAL
+	select SPL_LIBCOMMON_SUPPORT
+	select SPL_LIBGENERIC_SUPPORT
+	select SPL_NAND_SUPPORT if SPL_NAND_DENALI
+	select SPL_OF_CONTROL
+	select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64
+	select SPL_SERIAL_SUPPORT
+	select SPL_SYSRESET
+	select SPL_WATCHDOG_SUPPORT
+	select SUPPORT_SPL
+	select SYS_NS16550
+	select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
+	select SYSRESET
+	select SYSRESET_SOCFPGA if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
+	select SYSRESET_SOCFPGA_SOC64 if TARGET_SOCFPGA_SOC64
+	imply CMD_DM
+	imply CMD_MTDPARTS
+	imply CRC32_VERIFY
+	imply DM_SPI
+	imply DM_SPI_FLASH
+	imply FAT_WRITE
+	imply SPL
+	imply SPL_DM
+	imply SPL_DM_SPI
+	imply SPL_DM_SPI_FLASH
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_MMC_SUPPORT
+	imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+	imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+	imply SPL_SPI_FLASH_SUPPORT
+	imply SPL_SPI_SUPPORT
+	imply L2X0_CACHE
+
+config ARCH_SUNXI
+	bool "Support sunxi (Allwinner) SoCs"
+	select BINMAN
+	select CMD_GPIO
+	select CMD_MMC if MMC
+	select CMD_USB if DISTRO_DEFAULTS
+	select CLK
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_KEYBOARD
+	select DM_MMC if MMC
+	select DM_SCSI if SCSI
+	select DM_SERIAL
+	select DM_USB if DISTRO_DEFAULTS
+	select OF_BOARD_SETUP
+	select OF_CONTROL
+	select OF_SEPARATE
+	select SPECIFY_CONSOLE_INDEX
+	select SPL_STACK_R if SPL
+	select SPL_SYS_MALLOC_SIMPLE if SPL
+	select SPL_SYS_THUMB_BUILD if !ARM64
+	select SUNXI_GPIO
+	select SYS_NS16550
+	select SYS_THUMB_BUILD if !ARM64
+	select USB if DISTRO_DEFAULTS
+	select USB_KEYBOARD if DISTRO_DEFAULTS
+	select USB_STORAGE if DISTRO_DEFAULTS
+	select SPL_USE_TINY_PRINTF
+	select USE_PREBOOT
+	select SYS_RELOC_GD_ENV_ADDR
+	imply BOARD_LATE_INIT
+	imply CMD_DM
+	imply CMD_GPT
+	imply CMD_UBI if MTD_RAW_NAND
+	imply DISTRO_DEFAULTS
+	imply FAT_WRITE
+	imply FIT
+	imply OF_LIBFDT_OVERLAY
+	imply PRE_CONSOLE_BUFFER
+	imply SPL_GPIO_SUPPORT
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_MMC_SUPPORT if MMC
+	imply SPL_POWER_SUPPORT
+	imply SPL_SERIAL_SUPPORT
+	imply USB_GADGET
+
+config ARCH_U8500
+	bool "ST-Ericsson U8500 Series"
+	select CPU_V7A
+	select DM
+	select DM_GPIO
+	select DM_MMC if MMC
+	select DM_SERIAL
+	select DM_USB if USB
+	select OF_CONTROL
+	select SYSRESET
+	select TIMER
+	imply ARM_PL180_MMCI
+	imply DM_RTC
+	imply NOMADIK_MTU_TIMER
+	imply PL01X_SERIAL
+	imply RTC_PL031
+	imply SYSRESET_SYSCON
+
+config ARCH_VERSAL
+	bool "Support Xilinx Versal Platform"
+	select ARM64
+	select CLK
+	select DM
+	select DM_ETH if NET
+	select DM_MMC if MMC
+	select DM_SERIAL
+	select OF_CONTROL
+	imply BOARD_LATE_INIT
+	imply ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+config ARCH_VF610
+	bool "Freescale Vybrid"
+	select CPU_V7A
+	select SYS_FSL_ERRATUM_ESDHC111
+	imply CMD_MTDPARTS
+	imply MTD_RAW_NAND
+
+config ARCH_ZYNQ
+	bool "Xilinx Zynq based platform"
+	select CLK
+	select CLK_ZYNQ
+	select CPU_V7A
+	select DM
+	select DM_ETH if NET
+	select DM_MMC if MMC
+	select DM_SERIAL
+	select DM_SPI
+	select DM_SPI_FLASH
+	select DM_USB if USB
+	select OF_CONTROL
+	select SPI
+	select SPL_BOARD_INIT if SPL
+	select SPL_CLK if SPL
+	select SPL_DM if SPL
+	select SPL_DM_SPI if SPL
+	select SPL_DM_SPI_FLASH if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_SEPARATE_BSS if SPL
+	select SUPPORT_SPL
+	imply ARCH_EARLY_INIT_R
+	imply BOARD_LATE_INIT
+	imply CMD_CLK
+	imply CMD_DM
+	imply CMD_SPL
+	imply ENV_VARS_UBOOT_RUNTIME_CONFIG
+	imply FAT_WRITE
+
+config ARCH_ZYNQMP_R5
+	bool "Xilinx ZynqMP R5 based platform"
+	select CLK
+	select CPU_V7R
+	select DM
+	select DM_ETH if NET
+	select DM_MMC if MMC
+	select DM_SERIAL
+	select OF_CONTROL
+	imply CMD_DM
+	imply DM_USB_GADGET
+
+config ARCH_ZYNQMP
+	bool "Xilinx ZynqMP based platform"
+	select ARM64
+	select CLK
+	select DM
+	select DM_ETH if NET
+	select DM_MAILBOX
+	select DM_MMC if MMC
+	select DM_SERIAL
+	select DM_SPI if SPI
+	select DM_SPI_FLASH if DM_SPI
+	select DM_USB if USB
+	select FIRMWARE
+	select OF_CONTROL
+	select SPL_BOARD_INIT if SPL
+	select SPL_CLK if SPL
+	select SPL_DM if SPL
+	select SPL_DM_SPI if SPI && SPL_DM
+	select SPL_DM_SPI_FLASH if SPL_DM_SPI
+	select SPL_DM_MAILBOX if SPL
+	select SPL_FIRMWARE if SPL
+	select SPL_SEPARATE_BSS if SPL
+	select SUPPORT_SPL
+	select ZYNQMP_IPI
+	imply BOARD_LATE_INIT
+	imply CMD_DM
+	imply ENV_VARS_UBOOT_RUNTIME_CONFIG
+	imply FAT_WRITE
+	imply MP
+	imply DM_USB_GADGET
+
+config ARCH_TEGRA
+	bool "NVIDIA Tegra"
+	imply DISTRO_DEFAULTS
+	imply FAT_WRITE
+
+config TARGET_VEXPRESS64_AEMV8A
+	bool "Support vexpress_aemv8a"
+	select ARM64
+	select PL01X_SERIAL
+
+config TARGET_VEXPRESS64_BASE_FVP
+	bool "Support Versatile Express ARMv8a FVP BASE model"
+	select ARM64
+	select PL01X_SERIAL
+	select SEMIHOSTING
+
+config TARGET_VEXPRESS64_JUNO
+	bool "Support Versatile Express Juno Development Platform"
+	select ARM64
+	select PL01X_SERIAL
+	select DM
+	select OF_CONTROL
+	select OF_BOARD
+	select CLK
+	select DM_SERIAL
+	select ARM_PSCI_FW
+	select PSCI_RESET
+	select DM_ETH
+	select BLK
+	select USB
+	select DM_USB
+
+config TARGET_TOTAL_COMPUTE
+	bool "Support Total Compute Platform"
+	select ARM64
+	select PL01X_SERIAL
+	select DM
+	select DM_SERIAL
+	select DM_MMC
+	select DM_GPIO
+
+config TARGET_LS2080A_EMU
+	bool "Support ls2080a_emu"
+	select ARCH_LS2080A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select FSL_DDR_SYNC_REFRESH
+	help
+	  Support for Freescale LS2080A_EMU platform.
+	  The LS2080A Development System (EMULATOR) is a pre-silicon
+	  development platform that supports the QorIQ LS2080A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1088AQDS
+	bool "Support ls1088aqds"
+	select ARCH_LS1088A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select FSL_DDR_INTERACTIVE if !SD_BOOT
+	help
+	  Support for NXP LS1088AQDS platform.
+	  The LS1088A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS1088A
+	  Layerscape Architecture processor.
+
+config TARGET_LS2080AQDS
+	bool "Support ls2080aqds"
+	select ARCH_LS2080A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	imply SCSI
+	imply SCSI_AHCI
+	select FSL_DDR_BIST
+	select FSL_DDR_INTERACTIVE if !SPL
+	help
+	  Support for Freescale LS2080AQDS platform.
+	  The LS2080A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS2080A
+	  Layerscape Architecture processor.
+
+config TARGET_LS2080ARDB
+	bool "Support ls2080ardb"
+	select ARCH_LS2080A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select FSL_DDR_BIST
+	select FSL_DDR_INTERACTIVE if !SPL
+	imply SCSI
+	imply SCSI_AHCI
+	help
+	  Support for Freescale LS2080ARDB platform.
+	  The LS2080A Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS2080A
+	  Layerscape Architecture processor.
+
+config TARGET_LS2081ARDB
+	bool "Support ls2081ardb"
+	select ARCH_LS2080A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	help
+	  Support for Freescale LS2081ARDB platform.
+	  The LS2081A Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS2081A/LS2041A
+	  Layerscape Architecture processor.
+
+config TARGET_LX2160ARDB
+	bool "Support lx2160ardb"
+	select ARCH_LX2160A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	help
+	  Support for NXP LX2160ARDB platform.
+	  The lx2160ardb (LX2160A Reference design board (RDB)
+	  is a high-performance development platform that supports the
+	  QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
+
+config TARGET_LX2160AQDS
+	bool "Support lx2160aqds"
+	select ARCH_LX2160A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	help
+	  Support for NXP LX2160AQDS platform.
+	  The lx2160aqds (LX2160A QorIQ Development System (QDS)
+	  is a high-performance development platform that supports the
+	  QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
+
+config TARGET_LX2162AQDS
+	bool "Support lx2162aqds"
+	select ARCH_LX2162A
+	select ARCH_MISC_INIT
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	help
+	  Support for NXP LX2162AQDS platform.
+	  The lx2162aqds support is based on LX2160A Layerscape Architecture processor.
+
+config TARGET_HIKEY
+	bool "Support HiKey 96boards Consumer Edition Platform"
+	select ARM64
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select OF_CONTROL
+	select PL01X_SERIAL
+	select SPECIFY_CONSOLE_INDEX
+	imply CMD_DM
+	  help
+	  Support for HiKey 96boards platform. It features a HI6220
+	  SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
+
+config TARGET_HIKEY960
+	bool "Support HiKey960 96boards Consumer Edition Platform"
+	select ARM64
+	select DM
+	select DM_SERIAL
+	select OF_CONTROL
+	select PL01X_SERIAL
+	imply CMD_DM
+	  help
+	  Support for HiKey960 96boards platform. It features a HI3660
+	  SoC, with 4xA73 CPU, 4xA53 CPU, MALI-G71 GPU, and 3GB RAM.
+
+config TARGET_POPLAR
+	bool "Support Poplar 96boards Enterprise Edition Platform"
+	select ARM64
+	select DM
+	select DM_SERIAL
+	select DM_USB
+	select OF_CONTROL
+	select PL01X_SERIAL
+	imply CMD_DM
+	  help
+	  Support for Poplar 96boards EE platform. It features a HI3798cv200
+	  SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
+	  making it capable of running any commercial set-top solution based on
+	  Linux or Android.
+
+config TARGET_LS1012AQDS
+	bool "Support ls1012aqds"
+	select ARCH_LS1012A
+	select ARM64
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	help
+	  Support for Freescale LS1012AQDS platform.
+	  The LS1012A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS1012A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1012ARDB
+	bool "Support ls1012ardb"
+	select ARCH_LS1012A
+	select ARM64
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	imply SCSI
+	imply SCSI_AHCI
+	help
+	  Support for Freescale LS1012ARDB platform.
+	  The LS1012A Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1012A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1012A2G5RDB
+	bool "Support ls1012a2g5rdb"
+	select ARCH_LS1012A
+	select ARM64
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	imply SCSI
+	help
+	  Support for Freescale LS1012A2G5RDB platform.
+	  The LS1012A 2G5 Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1012A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1012AFRWY
+	bool "Support ls1012afrwy"
+	select ARCH_LS1012A
+	select ARM64
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	imply SCSI
+	imply SCSI_AHCI
+	help
+	 Support for Freescale LS1012AFRWY platform.
+	 The LS1012A FRWY board (FRWY) is a high-performance
+	 development platform that supports the QorIQ LS1012A
+	 Layerscape Architecture processor.
+
+config TARGET_LS1012AFRDM
+	bool "Support ls1012afrdm"
+	select ARCH_LS1012A
+	select ARM64
+	select ARCH_SUPPORT_TFABOOT
+	help
+	  Support for Freescale LS1012AFRDM platform.
+	  The LS1012A Freedom  board (FRDM) is a high-performance
+	  development platform that supports the QorIQ LS1012A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1028AQDS
+	bool "Support ls1028aqds"
+	select ARCH_LS1028A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	help
+	  Support for Freescale LS1028AQDS platform
+	  The LS1028A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS1028A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1028ARDB
+	bool "Support ls1028ardb"
+	select ARCH_LS1028A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	help
+	  Support for Freescale LS1028ARDB platform
+	  The LS1028A Development System (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1028A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1088ARDB
+	bool "Support ls1088ardb"
+	select ARCH_LS1088A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select FSL_DDR_INTERACTIVE if !SD_BOOT
+	help
+	  Support for NXP LS1088ARDB platform.
+	  The LS1088A Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1088A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1021AQDS
+	bool "Support ls1021aqds"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select LS1_DEEP_SLEEP
+	select SUPPORT_SPL
+	select SYS_FSL_DDR
+	select FSL_DDR_INTERACTIVE
+	select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
+	select SPI_FLASH_DATAFLASH if FSL_DSPI || FSL_QSPI
+	imply SCSI
+
+config TARGET_LS1021ATWR
+	bool "Support ls1021atwr"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select LS1_DEEP_SLEEP
+	select SUPPORT_SPL
+	select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
+	imply SCSI
+
+config TARGET_PG_WCOM_SELI8
+	bool "Support Hitachi-Powergrids SELI8 service unit card"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select SYS_FSL_DDR
+	select FSL_DDR_INTERACTIVE
+	select VENDOR_KM
+	imply SCSI
+	help
+	 Support for Hitachi-Powergrids SELI8 service unit card.
+	 SELI8 is a QorIQ LS1021a based service unit card used
+	 in XMC20 and FOX615 product families.
+
+config TARGET_PG_WCOM_EXPU1
+	bool "Support Hitachi-Powergrids EXPU1 service unit card"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select SYS_FSL_DDR
+	select FSL_DDR_INTERACTIVE
+	select VENDOR_KM
+	imply SCSI
+	help
+	 Support for Hitachi-Powergrids EXPU1 service unit card.
+	 EXPU1 is a QorIQ LS1021a based service unit card used
+	 in XMC20 and FOX615 product families.
+
+config TARGET_LS1021ATSN
+	bool "Support ls1021atsn"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select LS1_DEEP_SLEEP
+	select SUPPORT_SPL
+	imply SCSI
+
+config TARGET_LS1021AIOT
+	bool "Support ls1021aiot"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select SUPPORT_SPL
+	select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
+	imply SCSI
+	help
+	  Support for Freescale LS1021AIOT platform.
+	  The LS1021A Freescale board (IOT) is a high-performance
+	  development platform that supports the QorIQ LS1021A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1043AQDS
+	bool "Support ls1043aqds"
+	select ARCH_LS1043A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select FSL_DDR_INTERACTIVE if !SPL
+	select FSL_DSPI if !SPL_NO_DSPI
+	select DM_SPI_FLASH if FSL_DSPI
+	imply SCSI
+	imply SCSI_AHCI
+	help
+	  Support for Freescale LS1043AQDS platform.
+
+config TARGET_LS1043ARDB
+	bool "Support ls1043ardb"
+	select ARCH_LS1043A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select FSL_DSPI if !SPL_NO_DSPI
+	select DM_SPI_FLASH if FSL_DSPI
+	help
+	  Support for Freescale LS1043ARDB platform.
+
+config TARGET_LS1046AQDS
+	bool "Support ls1046aqds"
+	select ARCH_LS1046A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM_SPI_FLASH if DM_SPI
+	select SUPPORT_SPL
+	select FSL_DDR_BIST if !SPL
+	select FSL_DDR_INTERACTIVE  if !SPL
+	select FSL_DDR_INTERACTIVE if !SPL
+	imply SCSI
+	help
+	  Support for Freescale LS1046AQDS platform.
+	  The LS1046A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS1046A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1046ARDB
+	bool "Support ls1046ardb"
+	select ARCH_LS1046A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM_SPI_FLASH if DM_SPI
+	select POWER_MC34VR500
+	select SUPPORT_SPL
+	select FSL_DDR_BIST
+	select FSL_DDR_INTERACTIVE if !SPL
+	imply SCSI
+	help
+	  Support for Freescale LS1046ARDB platform.
+	  The LS1046A Reference Design Board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1046A
+	  Layerscape Architecture processor.
+
+config TARGET_LS1046AFRWY
+	bool "Support ls1046afrwy"
+	select ARCH_LS1046A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM_SPI_FLASH if DM_SPI
+	imply SCSI
+	help
+	  Support for Freescale LS1046AFRWY platform.
+	  The LS1046A Freeway Board (FRWY) is a high-performance
+	  development platform that supports the QorIQ LS1046A
+	  Layerscape Architecture processor.
+
+config TARGET_SL28
+	bool "Support sl28"
+	select ARCH_LS1028A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select SUPPORT_SPL
+	select BINMAN
+	select DM
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_SPI_FLASH
+	select DM_ETH
+	select DM_MDIO
+	select DM_PCI
+	select DM_RNG
+	select DM_RTC
+	select DM_SCSI
+	select DM_SERIAL
+	select DM_SPI
+	select DM_USB
+	select SPL_DM if SPL
+	select SPL_DM_SPI if SPL
+	select SPL_DM_SPI_FLASH if SPL
+	select SPL_DM_I2C if SPL
+	select SPL_DM_MMC if SPL
+	select SPL_DM_SERIAL if SPL
+	help
+	  Support for Kontron SMARC-sAL28 board.
+
+config TARGET_COLIBRI_PXA270
+	bool "Support colibri_pxa270"
+	select CPU_PXA
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_MTD
+	select DM_RESET
+	select DM_SERIAL
+	select DM_USB
+	select OF_BOARD_SETUP
+	select OF_CONTROL
+	select OF_LIBFDT
+	select PINCTRL
+	select SPL_BOARD_INIT if SPL
+	select SPL_DM if SPL
+	select SPL_LIBCOMMON_SUPPORT if SPL
+	select SPL_LIBGENERIC_SUPPORT if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_PINCTRL if SPL
+	select SUPPORT_SPL
+	imply CMD_DM
+	imply DISTRO_DEFAULTS
+	imply FAT_WRITE
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
+
+config ARCH_STM32
+	bool "Support STMicroelectronics STM32 MCU with cortex M"
+	select CPU_V7M
+	select DM
+	select DM_SERIAL
+	imply CMD_DM
+
+config ARCH_STI
+	bool "Support STMicrolectronics SoCs"
+	select BLK
+	select CPU_V7A
+	select DM
+	select DM_MMC
+	select DM_RESET
+	select DM_SERIAL
+	imply CMD_DM
+	help
+	  Support for STMicroelectronics STiH407/10 SoC family.
+	  This SoC is used on Linaro 96Board STiH410-B2260
+
+config ARCH_STM32MP
+	bool "Support STMicroelectronics STM32MP Socs with cortex A"
+	select ARCH_MISC_INIT
+	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	select CLK
+	select DM
+	select DM_GPIO
+	select DM_RESET
+	select DM_SERIAL
+	select MISC
+	select OF_CONTROL
+	select OF_LIBFDT
+	select OF_SYSTEM_SETUP
+	select PINCTRL
+	select REGMAP
+	select SUPPORT_SPL
+	select SYSCON
+	select SYSRESET
+	select SYS_THUMB_BUILD
+	imply SPL_SYSRESET
+	imply CMD_DM
+	imply CMD_POWEROFF
+	imply OF_LIBFDT_OVERLAY
+	imply ENV_VARS_UBOOT_RUNTIME_CONFIG
+	imply USE_PREBOOT
+	help
+	  Support for STM32MP SoC family developed by STMicroelectronics,
+	  MPUs based on ARM cortex A core
+	  U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL).
+	  FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot
+	  chain.
+	  SPL is the unsecure FSBL for the basic boot chain.
+
+config ARCH_ROCKCHIP
+	bool "Support Rockchip SoCs"
+	select BLK
+	select BINMAN if SPL_OPTEE
+	select DM
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_PWM
+	select DM_REGULATOR
+	select DM_SERIAL
+	select DM_SPI
+	select DM_SPI_FLASH
+	select DM_USB if USB
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+	select OF_CONTROL
+	select SPI
+	select SPL_DM if SPL
+	select SPL_DM_SPI if SPL
+	select SPL_DM_SPI_FLASH if SPL
+	select SYS_MALLOC_F
+	select SYS_THUMB_BUILD if !ARM64
+	imply ADC
+	imply CMD_DM
+	imply DEBUG_UART_BOARD_INIT
+	imply DISTRO_DEFAULTS
+	imply FAT_WRITE
+	imply SARADC_ROCKCHIP
+	imply SPL_SYSRESET
+	imply SPL_SYS_MALLOC_SIMPLE
+	imply SYS_NS16550
+	imply TPL_SYSRESET
+	imply USB_FUNCTION_FASTBOOT
+
+config ARCH_OCTEONTX
+	bool "Support OcteonTX SoCs"
+	select CLK
+	select DM
+	select ARM64
+	select OF_CONTROL
+	select OF_LIVE
+	select BOARD_LATE_INIT
+	select SYS_CACHE_SHIFT_7
+
+config ARCH_OCTEONTX2
+	bool "Support OcteonTX2 SoCs"
+	select CLK
+	select DM
+	select ARM64
+	select OF_CONTROL
+	select OF_LIVE
+	select BOARD_LATE_INIT
+	select SYS_CACHE_SHIFT_7
+
+config TARGET_THUNDERX_88XX
+	bool "Support ThunderX 88xx"
+	select ARM64
+	select OF_CONTROL
+	select PL01X_SERIAL
+	select SYS_CACHE_SHIFT_7
+
+config ARCH_ASPEED
+	bool "Support Aspeed SoCs"
+	select DM
+	select OF_CONTROL
+	imply CMD_DM
+
+config TARGET_DURIAN
+	bool "Support Phytium Durian Platform"
+	select ARM64
+	help
+	  Support for durian platform.
+	  It has 2GB Sdram, uart and pcie.
+
+config TARGET_PRESIDIO_ASIC
+	bool "Support Cortina Presidio ASIC Platform"
+	select ARM64
+
+config TARGET_XENGUEST_ARM64
+	bool "Xen guest ARM64"
+	select ARM64
+	select XEN
+	select OF_CONTROL
+	select LINUX_KERNEL_IMAGE_HEADER
+	select XEN_SERIAL
+	select SSCANF
+endchoice
+
+config ARCH_SUPPORT_TFABOOT
+	bool
+
+config TFABOOT
+	bool "Support for booting from TF-A"
+	depends on ARCH_SUPPORT_TFABOOT
+	default n
+	help
+	  Some platforms support the setup of secure registers (for instance
+	  for CPU errata handling) or provide secure services like PSCI.
+	  Those services could also be provided by other firmware parts
+	  like TF-A (Trusted Firmware for Cortex-A), in which case U-Boot
+	  does not need to (and cannot) execute this code.
+	  Enabling this option will make a U-Boot binary that is relying
+	  on other firmware layers to provide secure functionality.
+
+config TI_SECURE_DEVICE
+	bool "HS Device Type Support"
+	depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
+	help
+	  If a high secure (HS) device type is being used, this config
+	  must be set. This option impacts various aspects of the
+	  build system (to create signed boot images that can be
+	  authenticated) and the code. See the doc/README.ti-secure
+	  file for further details.
+
+if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
+config ISW_ENTRY_ADDR
+	hex "Address in memory or XIP address of bootloader entry point"
+	default 0x402F4000 if AM43XX
+	default 0x402F0400 if AM33XX
+	default 0x40301350 if OMAP54XX
+	help
+	  After any reset, the boot ROM searches the boot media for a valid
+	  boot image. For non-XIP devices, the ROM then copies the image into
+	  internal memory. For all boot modes, after the ROM processes the
+	  boot image it eventually computes the entry point address depending
+	  on the device type (secure/non-secure), boot media (xip/non-xip) and
+	  image headers.
+endif
+
+source "arch/arm/mach-aspeed/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcm283x/Kconfig"
+
+source "arch/arm/mach-bcmstb/Kconfig"
+
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-exynos/Kconfig"
+
+source "arch/arm/mach-highbank/Kconfig"
+
+source "arch/arm/mach-integrator/Kconfig"
+
+source "arch/arm/mach-ipq40xx/Kconfig"
+
+source "arch/arm/mach-k3/Kconfig"
+
+source "arch/arm/mach-keystone/Kconfig"
+
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-lpc32xx/Kconfig"
+
+source "arch/arm/mach-mvebu/Kconfig"
+
+source "arch/arm/mach-octeontx/Kconfig"
+
+source "arch/arm/mach-octeontx2/Kconfig"
+
+source "arch/arm/cpu/armv7/ls102xa/Kconfig"
+
+source "arch/arm/mach-imx/mx2/Kconfig"
+
+source "arch/arm/mach-imx/mx3/Kconfig"
+
+source "arch/arm/mach-imx/mx5/Kconfig"
+
+source "arch/arm/mach-imx/mx6/Kconfig"
+
+source "arch/arm/mach-imx/mx7/Kconfig"
+
+source "arch/arm/mach-imx/mx7ulp/Kconfig"
+
+source "arch/arm/mach-imx/imx8/Kconfig"
+
+source "arch/arm/mach-imx/imx8m/Kconfig"
+
+source "arch/arm/mach-imx/imxrt/Kconfig"
+
+source "arch/arm/mach-imx/mxs/Kconfig"
+
+source "arch/arm/mach-omap2/Kconfig"
+
+source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
+
+source "arch/arm/mach-orion5x/Kconfig"
+
+source "arch/arm/mach-owl/Kconfig"
+
+source "arch/arm/mach-rmobile/Kconfig"
+
+source "arch/arm/mach-meson/Kconfig"
+
+source "arch/arm/mach-mediatek/Kconfig"
+
+source "arch/arm/mach-qemu/Kconfig"
+
+source "arch/arm/mach-rockchip/Kconfig"
+
+source "arch/arm/mach-s5pc1xx/Kconfig"
+
+source "arch/arm/mach-snapdragon/Kconfig"
+
+source "arch/arm/mach-socfpga/Kconfig"
+
+source "arch/arm/mach-sti/Kconfig"
+
+source "arch/arm/mach-stm32/Kconfig"
+
+source "arch/arm/mach-stm32mp/Kconfig"
+
+source "arch/arm/mach-sunxi/Kconfig"
+
+source "arch/arm/mach-tegra/Kconfig"
+
+source "arch/arm/mach-u8500/Kconfig"
+
+source "arch/arm/mach-uniphier/Kconfig"
+
+source "arch/arm/cpu/armv7/vf610/Kconfig"
+
+source "arch/arm/mach-zynq/Kconfig"
+
+source "arch/arm/mach-zynqmp/Kconfig"
+
+source "arch/arm/mach-versal/Kconfig"
+
+source "arch/arm/mach-zynqmp-r5/Kconfig"
+
+source "arch/arm/cpu/armv7/Kconfig"
+
+source "arch/arm/cpu/armv8/Kconfig"
+
+source "arch/arm/mach-imx/Kconfig"
+
+source "arch/arm/mach-nexell/Kconfig"
+
+source "board/armltd/total_compute/Kconfig"
+
+source "board/bosch/shc/Kconfig"
+source "board/bosch/guardian/Kconfig"
+source "board/CarMediaLab/flea3/Kconfig"
+source "board/Marvell/aspenite/Kconfig"
+source "board/Marvell/gplugd/Kconfig"
+source "board/Marvell/octeontx/Kconfig"
+source "board/Marvell/octeontx2/Kconfig"
+source "board/armltd/vexpress64/Kconfig"
+source "board/cortina/presidio-asic/Kconfig"
+source "board/broadcom/bcm963158/Kconfig"
+source "board/broadcom/bcm968360bg/Kconfig"
+source "board/broadcom/bcm968580xref/Kconfig"
+source "board/broadcom/bcmns3/Kconfig"
+source "board/cavium/thunderx/Kconfig"
+source "board/cirrus/edb93xx/Kconfig"
+source "board/eets/pdu001/Kconfig"
+source "board/emulation/qemu-arm/Kconfig"
+source "board/freescale/ls2080aqds/Kconfig"
+source "board/freescale/ls2080ardb/Kconfig"
+source "board/freescale/ls1088a/Kconfig"
+source "board/freescale/ls1028a/Kconfig"
+source "board/freescale/ls1021aqds/Kconfig"
+source "board/freescale/ls1043aqds/Kconfig"
+source "board/freescale/ls1021atwr/Kconfig"
+source "board/freescale/ls1021atsn/Kconfig"
+source "board/freescale/ls1021aiot/Kconfig"
+source "board/freescale/ls1046aqds/Kconfig"
+source "board/freescale/ls1043ardb/Kconfig"
+source "board/freescale/ls1046ardb/Kconfig"
+source "board/freescale/ls1046afrwy/Kconfig"
+source "board/freescale/ls1012aqds/Kconfig"
+source "board/freescale/ls1012ardb/Kconfig"
+source "board/freescale/ls1012afrdm/Kconfig"
+source "board/freescale/lx2160a/Kconfig"
+source "board/grinn/chiliboard/Kconfig"
+source "board/hisilicon/hikey/Kconfig"
+source "board/hisilicon/hikey960/Kconfig"
+source "board/hisilicon/poplar/Kconfig"
+source "board/isee/igep003x/Kconfig"
+source "board/kontron/sl28/Kconfig"
+source "board/myir/mys_6ulx/Kconfig"
+source "board/seeed/npi_imx6ull/Kconfig"
+source "board/spear/spear300/Kconfig"
+source "board/spear/spear310/Kconfig"
+source "board/spear/spear320/Kconfig"
+source "board/spear/spear600/Kconfig"
+source "board/spear/x600/Kconfig"
+source "board/st/stv0991/Kconfig"
+source "board/tcl/sl50/Kconfig"
+source "board/toradex/colibri_pxa270/Kconfig"
+source "board/variscite/dart_6ul/Kconfig"
+source "board/vscom/baltos/Kconfig"
+source "board/phytium/durian/Kconfig"
+source "board/xen/xenguest_arm64/Kconfig"
+source "board/keymile/Kconfig"
+
+source "arch/arm/Kconfig.debug"
+
+endmenu
+
+config SPL_LDSCRIPT
+	default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
+	default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
diff --git a/roms/u-boot/arch/arm/Kconfig.debug b/roms/u-boot/arch/arm/Kconfig.debug
new file mode 100644
index 000000000..624bcf468
--- /dev/null
+++ b/roms/u-boot/arch/arm/Kconfig.debug
@@ -0,0 +1,64 @@
+menu "ARM debug"
+
+config DEBUG_LL
+	bool "Low-level debugging functions"
+	depends on !ARM64
+	help
+	  Say Y here to include definitions of printascii, printch, printhex
+	  in U-Boot.  This is helpful if you are debugging code that
+	  executes before the console is initialized.
+
+choice
+	prompt "Low-level debugging port"
+	depends on DEBUG_LL
+
+	config DEBUG_LL_UART_8250
+		bool "Low-level debugging via 8250 UART"
+		help
+		  Say Y here if you wish the debug print routes to direct
+		  their output to an 8250 UART.  You can use this option
+		  to provide the parameters for the 8250 UART rather than
+		  selecting one of the platform specific options above if
+		  you know the parameters for the port.
+
+		  This option is preferred over the platform specific
+		  options; the platform specific options are deprecated
+		  and will be soon removed.
+
+endchoice
+
+config DEBUG_LL_INCLUDE
+	string
+	depends on DEBUG_LL
+	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	default "mach/debug-macro.S"
+
+# Compatibility options for 8250
+config DEBUG_UART_8250
+	bool
+
+config DEBUG_UART_PHYS
+	hex "Physical base address of debug UART"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+# This is not used in U-Boot
+config DEBUG_UART_VIRT
+	hex
+	default DEBUG_UART_PHYS
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+config DEBUG_UART_8250_SHIFT
+	int "Register offset shift for the 8250 debug UART"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	default 2
+
+config DEBUG_UART_8250_WORD
+	bool "Use 32-bit accesses for 8250 UART"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	depends on DEBUG_UART_8250_SHIFT >= 2
+
+config DEBUG_UART_8250_FLOW_CONTROL
+	bool "Enable flow control for 8250 UART"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+endmenu
diff --git a/roms/u-boot/arch/arm/Makefile b/roms/u-boot/arch/arm/Makefile
new file mode 100644
index 000000000..28b523b37
--- /dev/null
+++ b/roms/u-boot/arch/arm/Makefile
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_ARCH_TEGRA),yy)
+CONFIG_CPU_V7A=
+CONFIG_CPU_ARM720T=y
+endif
+
+# This selects which instruction set is used.
+arch-$(CONFIG_CPU_ARM720T)	=-march=armv4
+arch-$(CONFIG_CPU_ARM920T)	=-march=armv4t
+arch-$(CONFIG_CPU_ARM926EJS)	=-march=armv5te
+arch-$(CONFIG_CPU_ARM946ES)	=-march=armv5te
+arch-$(CONFIG_CPU_SA1100)	=-march=armv4
+arch-$(CONFIG_CPU_PXA)		=
+arch-$(CONFIG_CPU_ARM1136)	=-march=armv5t
+arch-$(CONFIG_CPU_ARM1176)	=-march=armv5t
+arch-$(CONFIG_CPU_V7A)		=$(call cc-option, -march=armv7-a, \
+				 $(call cc-option, -march=armv7))
+arch-$(CONFIG_CPU_V7M)		=-march=armv7-m
+arch-$(CONFIG_CPU_V7R)		=-march=armv7-r
+arch-$(CONFIG_ARM64)		=-march=armv8-a
+
+# On Tegra systems we must build SPL for the armv4 core on the device
+# but otherwise we can use the value in CONFIG_SYS_ARM_ARCH
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_ARCH_TEGRA),yy)
+arch-y += -D__LINUX_ARM_ARCH__=4
+else
+arch-y += -D__LINUX_ARM_ARCH__=$(CONFIG_SYS_ARM_ARCH)
+endif
+
+# Evaluate arch cc-option calls now
+arch-y := $(arch-y)
+
+# This selects how we optimise for the processor.
+tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM920T)	=
+tune-$(CONFIG_CPU_ARM926EJS)	=
+tune-$(CONFIG_CPU_ARM946ES)	=
+tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
+tune-$(CONFIG_CPU_PXA)		=-mcpu=xscale
+tune-$(CONFIG_CPU_ARM1136)	=
+tune-$(CONFIG_CPU_ARM1176)	=
+tune-$(CONFIG_CPU_V7A)		=-mtune=generic-armv7-a
+tune-$(CONFIG_CPU_V7R)		=
+tune-$(CONFIG_ARM64)		=
+
+# Evaluate tune cc-option calls now
+tune-y := $(tune-y)
+
+PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
+
+# Machine directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_ASPEED)		+= aspeed
+machine-$(CONFIG_ARCH_AT91)		+= at91
+machine-$(CONFIG_ARCH_BCM283X)		+= bcm283x
+machine-$(CONFIG_ARCH_BCMSTB)		+= bcmstb
+machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
+machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
+machine-$(CONFIG_ARCH_IPQ40XX)		+= ipq40xx
+machine-$(CONFIG_ARCH_K3)		+= k3
+machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
+machine-$(CONFIG_ARCH_KIRKWOOD)		+= kirkwood
+machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
+machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
+machine-$(CONFIG_ARCH_MESON)		+= meson
+machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
+machine-$(CONFIG_ARCH_NEXELL)		+= nexell
+machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
+machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
+machine-$(CONFIG_ARCH_OWL)		+= owl
+machine-$(CONFIG_ARCH_RMOBILE)		+= rmobile
+machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
+machine-$(CONFIG_ARCH_S5PC1XX)		+= s5pc1xx
+machine-$(CONFIG_ARCH_SNAPDRAGON)	+= snapdragon
+machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_STM32)		+= stm32
+machine-$(CONFIG_ARCH_STM32MP)		+= stm32mp
+machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
+machine-$(CONFIG_ARCH_TEGRA)		+= tegra
+machine-$(CONFIG_ARCH_U8500)		+= u8500
+machine-$(CONFIG_ARCH_OCTEONTX)		+= octeontx
+machine-$(CONFIG_ARCH_OCTEONTX2)	+= octeontx2
+machine-$(CONFIG_ARCH_UNIPHIER)		+= uniphier
+machine-$(CONFIG_ARCH_VERSAL)		+= versal
+machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_ARCH_ZYNQMP)		+= zynqmp
+machine-$(CONFIG_ARCH_ZYNQMP_R5)	+= zynqmp-r5
+
+machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
+
+PLATFORM_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs))
+
+libs-y += $(machdirs)
+
+head-y := arch/arm/cpu/$(CPU)/start.o
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+ifneq ($(CONFIG_SPL_START_S_PATH),)
+head-y := $(CONFIG_SPL_START_S_PATH:"%"=%)/start.o
+endif
+endif
+
+libs-y += arch/arm/cpu/$(CPU)/
+libs-y += arch/arm/cpu/
+libs-y += arch/arm/lib/
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m imx8 imxrt))
+libs-y += arch/arm/mach-imx/
+endif
+else
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx7 mx7ulp mx31 mx35 mxs imx8m imx8 imxrt vf610))
+libs-y += arch/arm/mach-imx/
+endif
+endif
+
+ifneq (,$(filter $(SOC), kirkwood))
+libs-y += arch/arm/mach-mvebu/
+endif
+
+# deprecated
+-include $(machdirs)/config.mk
diff --git a/roms/u-boot/arch/arm/config.mk b/roms/u-boot/arch/arm/config.mk
new file mode 100644
index 000000000..16c63e126
--- /dev/null
+++ b/roms/u-boot/arch/arm/config.mk
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+ifndef CONFIG_STANDALONE_LOAD_ADDR
+ifneq ($(CONFIG_ARCH_OMAP2PLUS),)
+CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
+else
+CONFIG_STANDALONE_LOAD_ADDR = 0xc100000
+endif
+endif
+
+CFLAGS_NON_EFI := -fno-pic -ffixed-r9 -ffunction-sections -fdata-sections \
+		  -fstack-protector-strong
+CFLAGS_EFI := -fpic -fshort-wchar
+
+ifneq ($(CONFIG_LTO)$(CONFIG_USE_PRIVATE_LIBGCC),yy)
+LDFLAGS_FINAL += --gc-sections
+endif
+
+ifndef CONFIG_LTO
+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
+endif
+
+PLATFORM_RELFLAGS += -fno-common -ffixed-r9
+PLATFORM_RELFLAGS += $(call cc-option, -msoft-float) \
+      $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
+
+# LLVM support
+LLVM_RELFLAGS		:= $(call cc-option,-mllvm,) \
+			$(call cc-option,-mno-movt,)
+PLATFORM_RELFLAGS	+= $(LLVM_RELFLAGS)
+
+PLATFORM_CPPFLAGS += -D__ARM__
+
+ifdef CONFIG_ARM64
+PLATFORM_ELFFLAGS += -B aarch64 -O elf64-littleaarch64
+else
+PLATFORM_ELFFLAGS += -B arm -O elf32-littlearm
+endif
+
+# Choose between ARM/Thumb instruction sets
+ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
+AFLAGS_IMPLICIT_IT	:= $(call as-option,-Wa$(comma)-mimplicit-it=always)
+PF_CPPFLAGS_ARM		:= $(AFLAGS_IMPLICIT_IT) \
+			$(call cc-option, -mthumb -mthumb-interwork,\
+			$(call cc-option,-marm,)\
+			$(call cc-option,-mno-thumb-interwork,)\
+		)
+else
+PF_CPPFLAGS_ARM := $(call cc-option,-marm,) \
+		$(call cc-option,-mno-thumb-interwork,)
+endif
+
+# Only test once
+ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
+archprepare: checkthumb checkgcc6
+
+checkthumb:
+	@if test "$(call cc-name)" = "gcc" -a \
+			"$(call cc-version)" -lt "0404"; then \
+		echo -n '*** Your GCC does not produce working '; \
+		echo 'binaries in THUMB mode.'; \
+		echo '*** Your board is configured for THUMB mode.'; \
+		false; \
+	fi
+else
+archprepare: checkgcc6
+endif
+
+checkgcc6:
+	@if test "$(call cc-name)" = "gcc" -a \
+			"$(call cc-version)" -lt "0600"; then \
+		echo '*** Your GCC is older than 6.0 and is not supported'; \
+		false; \
+	fi
+
+
+# Try if EABI is supported, else fall back to old API,
+# i. e. for example:
+# - with ELDK 4.2 (EABI supported), use:
+#	-mabi=aapcs-linux
+# - with ELDK 4.1 (gcc 4.x, no EABI), use:
+#	-mabi=apcs-gnu
+# - with ELDK 3.1 (gcc 3.x), use:
+#	-mapcs-32
+PF_CPPFLAGS_ABI := $(call cc-option,\
+			-mabi=aapcs-linux,\
+			$(call cc-option,\
+				-mapcs-32,\
+				$(call cc-option,\
+					-mabi=apcs-gnu,\
+				)\
+			)\
+		)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARM) $(PF_CPPFLAGS_ABI)
+
+# For EABI, make sure to provide raise()
+ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
+# This file is parsed many times, so the string may get added multiple
+# times. Also, the prefix needs to be different based on whether
+# CONFIG_SPL_BUILD is defined or not. 'filter-out' the existing entry
+# before adding the correct one.
+PLATFORM_LIBS := arch/arm/lib/eabi_compat.o \
+	$(filter-out arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS))
+endif
+
+# needed for relocation
+LDFLAGS_u-boot += -pie
+
+#
+# FIXME: binutils versions < 2.22 have a bug in the assembler where
+# branches to weak symbols can be incorrectly optimized in thumb mode
+# to a short branch (b.n instruction) that won't reach when the symbol
+# gets preempted
+#
+# http://sourceware.org/bugzilla/show_bug.cgi?id=12532
+#
+ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
+ifeq ($(GAS_BUG_12532),)
+export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \
+	then echo y; else echo n; fi)
+endif
+ifeq ($(GAS_BUG_12532),y)
+PLATFORM_RELFLAGS += -fno-optimize-sibling-calls
+endif
+endif
+
+ifneq ($(CONFIG_SPL_BUILD),y)
+# Check that only R_ARM_RELATIVE relocations are generated.
+INPUTS-y += checkarmreloc
+# The movt / movw can hardcode 16 bit parts of the addresses in the
+# instruction. Relocation is not supported for that case, so disable
+# such usage by requiring word relocations.
+PLATFORM_CPPFLAGS += $(call cc-option, -mword-relocations)
+PLATFORM_CPPFLAGS += $(call cc-option, -fno-pic)
+endif
+
+# limit ourselves to the sections we want in the .bin.
+ifdef CONFIG_ARM64
+OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .data \
+		-j .u_boot_list -j .rela.dyn -j .got -j .got.plt \
+		-j .binman_sym_table -j .text_rest
+else
+OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .hash \
+		-j .data -j .got -j .got.plt -j .u_boot_list -j .rel.dyn \
+		-j .binman_sym_table -j .text_rest
+endif
+
+# if a dtb section exists we always have to include it
+# there are only two cases where it is generated
+# 1) OF_EMBEDED is turned on
+# 2) unit tests include device tree blobs
+OBJCOPYFLAGS += -j .dtb.init.rodata
+
+ifdef CONFIG_EFI_LOADER
+OBJCOPYFLAGS += -j .efi_runtime -j .efi_runtime_rel
+endif
+
+ifneq ($(CONFIG_IMX_CONFIG),)
+ifdef CONFIG_SPL
+ifndef CONFIG_SPL_BUILD
+INPUTS-y += SPL
+endif
+else
+ifeq ($(CONFIG_OF_SEPARATE),y)
+INPUTS-y += u-boot-dtb.imx
+else
+INPUTS-y += u-boot.imx
+endif
+endif
+ifneq ($(CONFIG_VF610),)
+INPUTS-y += u-boot.vyb
+endif
+endif
+
+EFI_LDS := elf_arm_efi.lds
+EFI_CRT0 := crt0_arm_efi.o
+EFI_RELOC := reloc_arm_efi.o
diff --git a/roms/u-boot/arch/arm/cpu/Makefile b/roms/u-boot/arch/arm/cpu/Makefile
new file mode 100644
index 000000000..a0e1c2a65
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj- += dummy.o
diff --git a/roms/u-boot/arch/arm/cpu/arm11/Makefile b/roms/u-boot/arch/arm/cpu/arm11/Makefile
new file mode 100644
index 000000000..5dfa01ae8
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm11/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	= cpu.o
+
+ifneq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_EFI_LOADER) += sctlr.o
+endif
diff --git a/roms/u-boot/arch/arm/cpu/arm11/cpu.c b/roms/u-boot/arch/arm/cpu/arm11/cpu.c
new file mode 100644
index 000000000..ffe35111d
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm11/cpu.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2004 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/cache.h>
+#include <asm/system.h>
+
+static void cache_flush(void);
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	disable_interrupts();
+
+	/* turn off I/D-cache */
+	icache_disable();
+	dcache_disable();
+	/* flush I/D-cache */
+	cache_flush();
+
+	return 0;
+}
+
+static void cache_flush(void)
+{
+	unsigned long i = 0;
+	/* clean entire data cache */
+	asm volatile("mcr p15, 0, %0, c7, c10, 0" : : "r" (i));
+	/* invalidate both caches and flush btb */
+	asm volatile("mcr p15, 0, %0, c7, c7, 0" : : "r" (i));
+	/* mem barrier to sync things */
+	asm volatile("mcr p15, 0, %0, c7, c10, 4" : : "r" (i));
+}
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void invalidate_dcache_all(void)
+{
+	asm volatile("mcr p15, 0, %0, c7, c6, 0" : : "r" (0));
+}
+
+void flush_dcache_all(void)
+{
+	asm volatile("mcr p15, 0, %0, c7, c10, 0" : : "r" (0));
+	asm volatile("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+	if (!check_cache_range(start, stop))
+		return;
+
+	while (start < stop) {
+		asm volatile("mcr p15, 0, %0, c7, c6, 1" : : "r" (start));
+		start += CONFIG_SYS_CACHELINE_SIZE;
+	}
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	if (!check_cache_range(start, stop))
+		return;
+
+	while (start < stop) {
+		asm volatile("mcr p15, 0, %0, c7, c14, 1" : : "r" (start));
+		start += CONFIG_SYS_CACHELINE_SIZE;
+	}
+
+	asm volatile("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+}
+
+#else /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+#endif /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+
+#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+void enable_caches(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+	icache_enable();
+#endif
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	dcache_enable();
+#endif
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm11/sctlr.S b/roms/u-boot/arch/arm/cpu/arm11/sctlr.S
new file mode 100644
index 000000000..74a7fc4a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm11/sctlr.S
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier:	GPL-2.0+ */
+/*
+ *  Routines to access the system control register
+ *
+ *  Copyright (c) 2019 Heinrich Schuchardt
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * void allow_unaligned(void) - allow unaligned access
+ *
+ * This routine sets the enable unaligned data support flag and clears the
+ * aligned flag in the system control register.
+ * After calling this routine unaligned access does no longer leads to a
+ * data abort or undefined behavior but is handled by the CPU.
+ * For details see the "ARM Architecture Reference Manual" for ARMv6.
+ */
+ENTRY(allow_unaligned)
+	mrc	p15, 0, r0, c1, c0, 0	@ load system control register
+	orr	r0, r0, #1 << 22	@ set unaligned data support flag
+	bic	r0, r0, #2		@ clear aligned flag
+	mcr	p15, 0, r0, c1, c0, 0	@ write system control register
+	bx	lr			@ return
+ENDPROC(allow_unaligned)
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/Makefile b/roms/u-boot/arch/arm/cpu/arm1136/Makefile
new file mode 100644
index 000000000..24c33861c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	= start.o
+
+obj-y += ../arm11/
+obj-$(CONFIG_MX31) += mx31/
+obj-$(CONFIG_MX35) += mx35/
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx31/Makefile b/roms/u-boot/arch/arm/cpu/arm1136/mx31/Makefile
new file mode 100644
index 000000000..67799eeb8
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx31/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	+= generic.o
+obj-y	+= timer.o
+obj-y	+= devices.o
+obj-y	+= relocate.o
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx31/devices.c b/roms/u-boot/arch/arm/cpu/arm1136/mx31/devices.c
new file mode 100644
index 000000000..9997e8fc3
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx31/devices.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ */
+
+#include <common.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+void mx31_uart1_hw_init(void)
+{
+	/* setup pins for UART1 */
+	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
+}
+
+void mx31_uart2_hw_init(void)
+{
+	/* setup pins for UART2 */
+	mx31_gpio_mux(MUX_RXD2__UART2_RXD_MUX);
+	mx31_gpio_mux(MUX_TXD2__UART2_TXD_MUX);
+	mx31_gpio_mux(MUX_RTS2__UART2_RTS_B);
+	mx31_gpio_mux(MUX_CTS2__UART2_CTS_B);
+}
+
+#ifdef CONFIG_MXC_SPI
+/*
+ * Note: putting several spi setups here makes no sense as they may differ
+ * at board level (physical pin SS0 of CSPI2 may aswell be used as SS0 of CSPI3)
+ */
+void mx31_spi2_hw_init(void)
+{
+	/* SPI2 */
+	mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
+	mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
+	mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
+	mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
+	mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
+	mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
+	mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
+
+	/* start SPI2 clock */
+	__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx31/generic.c b/roms/u-boot/arch/arm/cpu/arm1136/mx31/generic.c
new file mode 100644
index 000000000..a3d4f1479
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx31/generic.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <init.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+
+static u32 mx31_decode_pll(u32 reg, u32 infreq)
+{
+	u32 mfi = GET_PLL_MFI(reg);
+	s32 mfn = GET_PLL_MFN(reg);
+	u32 mfd = GET_PLL_MFD(reg);
+	u32 pd =  GET_PLL_PD(reg);
+
+	mfi = mfi <= 5 ? 5 : mfi;
+	mfn = mfn >= 512 ? mfn - 1024 : mfn;
+	mfd += 1;
+	pd += 1;
+
+	return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
+		mfd * pd);
+}
+
+static u32 mx31_get_mpl_dpdgck_clk(void)
+{
+	u32 infreq;
+
+	if ((readl(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
+		infreq = MXC_CLK32 * 1024;
+	else
+		infreq = MXC_HCLK;
+
+	return mx31_decode_pll(readl(CCM_MPCTL), infreq);
+}
+
+static u32 mx31_get_mcu_main_clk(void)
+{
+	/* For now we assume mpl_dpdgck_clk == mcu_main_clk
+	 * which should be correct for most boards
+	 */
+	return mx31_get_mpl_dpdgck_clk();
+}
+
+static u32 mx31_get_ipg_clk(void)
+{
+	u32 freq = mx31_get_mcu_main_clk();
+	u32 pdr0 = readl(CCM_PDR0);
+
+	freq /= GET_PDR0_MAX_PODF(pdr0) + 1;
+	freq /= GET_PDR0_IPG_PODF(pdr0) + 1;
+
+	return freq;
+}
+
+/* hsp is the clock for the ipu */
+static u32 mx31_get_hsp_clk(void)
+{
+	u32 freq = mx31_get_mcu_main_clk();
+	u32 pdr0 = readl(CCM_PDR0);
+
+	freq /= GET_PDR0_HSP_PODF(pdr0) + 1;
+
+	return freq;
+}
+
+void mx31_dump_clocks(void)
+{
+	u32 cpufreq = mx31_get_mcu_main_clk();
+	printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
+	printf("ipg clock     : %dHz\n", mx31_get_ipg_clk());
+	printf("hsp clock     : %dHz\n", mx31_get_hsp_clk());
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return mx31_get_mcu_main_clk();
+	case MXC_IPG_CLK:
+	case MXC_IPG_PERCLK:
+	case MXC_CSPI_CLK:
+	case MXC_UART_CLK:
+	case MXC_ESDHC_CLK:
+	case MXC_I2C_CLK:
+		return mx31_get_ipg_clk();
+	case MXC_IPU_CLK:
+		return mx31_get_hsp_clk();
+	}
+	return -1;
+}
+
+u32 imx_get_uartclk(void)
+{
+	return mxc_get_clock(MXC_UART_CLK);
+}
+
+void mx31_gpio_mux(unsigned long mode)
+{
+	unsigned long reg, shift, tmp;
+
+	reg = IOMUXC_BASE + (mode & 0x1fc);
+	shift = (~mode & 0x3) * 8;
+
+	tmp = readl(reg);
+	tmp &= ~(0xff << shift);
+	tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift;
+	writel(tmp, reg);
+}
+
+void mx31_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 field, l, reg;
+
+	pin &= IOMUX_PADNUM_MASK;
+	reg = (IOMUXC_BASE + 0x154) + (pin + 2) / 3 * 4;
+	field = (pin + 2) % 3;
+
+	l = readl(reg);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
+	writel(l, reg);
+
+}
+
+void mx31_set_gpr(enum iomux_gp_func gp, char en)
+{
+	u32 l;
+	struct iomuxc_regs *iomuxc = (struct iomuxc_regs *)IOMUXC_BASE;
+
+	l = readl(&iomuxc->gpr);
+	if (en)
+		l |= gp;
+	else
+		l &= ~gp;
+
+	writel(l, &iomuxc->gpr);
+}
+
+void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs)
+{
+	struct mx31_weim *weim = (struct mx31_weim *) WEIM_BASE;
+	struct mx31_weim_cscr *cscr = &weim->cscr[cs];
+
+	writel(weimcs->upper, &cscr->upper);
+	writel(weimcs->lower, &cscr->lower);
+	writel(weimcs->additional, &cscr->additional);
+}
+
+struct mx3_cpu_type mx31_cpu_type[] = {
+	{ .srev = 0x00, .v = 0x10 },
+	{ .srev = 0x10, .v = 0x11 },
+	{ .srev = 0x11, .v = 0x11 },
+	{ .srev = 0x12, .v = 0x1F },
+	{ .srev = 0x13, .v = 0x1F },
+	{ .srev = 0x14, .v = 0x12 },
+	{ .srev = 0x15, .v = 0x12 },
+	{ .srev = 0x28, .v = 0x20 },
+	{ .srev = 0x29, .v = 0x20 },
+};
+
+u32 get_cpu_rev(void)
+{
+	u32 i, srev;
+
+	/* read SREV register from IIM module */
+	struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR;
+	srev = readl(&iim->iim_srev);
+
+	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+		if (srev == mx31_cpu_type[i].srev)
+			return mx31_cpu_type[i].v | (MXC_CPU_MX31 << 12);
+
+	return srev | 0x8000;
+}
+
+static char *get_reset_cause(void)
+{
+	/* read RCSR register from CCM module */
+	struct clock_control_regs *ccm =
+		(struct clock_control_regs *)CCM_BASE;
+
+	u32 cause = readl(&ccm->rcsr) & 0x07;
+
+	switch (cause) {
+	case 0x0000:
+		return "POR";
+	case 0x0001:
+		return "RST";
+	case 0x0002:
+		return "WDOG";
+	case 0x0006:
+		return "JTAG";
+	case 0x0007:
+		return "ARM11P power gating";
+	default:
+		return "unknown reset";
+	}
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	u32 srev = get_cpu_rev();
+
+	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
+			(srev & 0xF0) >> 4, (srev & 0x0F),
+			((srev & 0x8000) ? " unknown" : ""),
+			mx31_get_mcu_main_clk() / 1000000);
+	printf("Reset cause: %s\n", get_reset_cause());
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx31/relocate.S b/roms/u-boot/arch/arm/cpu/arm1136/mx31/relocate.S
new file mode 100644
index 000000000..225e5281b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx31/relocate.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  relocate - i.MX31-specific vector relocation
+ *
+ *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * The i.MX31 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM, so let's avoid relocating the vectors.
+ */
+	.section	.text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+	bx	lr
+
+ENDPROC(relocate_vectors)
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx31/timer.c b/roms/u-boot/arch/arm/cpu/arm1136/mx31/timer.c
new file mode 100644
index 000000000..a91386049
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx31/timer.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/io.h>
+
+#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
+
+/* General purpose timers registers */
+#define GPTCR	__REG(TIMER_BASE)		/* Control register	*/
+#define GPTPR	__REG(TIMER_BASE + 0x4)		/* Prescaler register	*/
+#define GPTSR	__REG(TIMER_BASE + 0x8)		/* Status register	*/
+#define GPTCNT	__REG(TIMER_BASE + 0x24)	/* Counter register	*/
+
+/* General purpose timers bitfields */
+#define GPTCR_SWR		(1 << 15)	/* Software reset	*/
+#define GPTCR_FRR		(1 << 9)	/* Freerun / restart	*/
+#define GPTCR_CLKSOURCE_32	(4 << 6)	/* Clock source		*/
+#define GPTCR_TEN		1		/* Timer enable		*/
+
+/* The 32768Hz 32-bit timer overruns in 131072 seconds */
+int timer_init(void)
+{
+	int i;
+
+	/* setup GP Timer 1 */
+	GPTCR = GPTCR_SWR;
+	for (i = 0; i < 100; i++)
+		GPTCR = 0; /* We have no udelay by now */
+	GPTPR = 0; /* 32Khz */
+	/* Freerun Mode, PERCLK1 input */
+	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
+
+	return 0;
+}
+
+unsigned long timer_read_counter(void)
+{
+	return GPTCNT;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx35/Makefile b/roms/u-boot/arch/arm/cpu/arm1136/mx35/Makefile
new file mode 100644
index 000000000..36568f99e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx35/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+
+obj-y	+= generic.o
+obj-y	+= timer.o
+obj-y	+= mx35_sdram.o
+obj-y	+= relocate.o
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx35/generic.c b/roms/u-boot/arch/arm/cpu/arm1136/mx35/generic.c
new file mode 100644
index 000000000..cbf76ab4f
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx35/generic.c
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <command.h>
+#include <div64.h>
+#include <init.h>
+#include <net.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#ifdef CONFIG_FSL_ESDHC_IMX
+#include <fsl_esdhc_imx.h>
+#endif
+#include <netdev.h>
+#include <spl.h>
+
+#define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel))
+#define CLK_CODE_ARM(c)		(((c) >> 16) & 0xFF)
+#define CLK_CODE_AHB(c)		(((c) >>  8) & 0xFF)
+#define CLK_CODE_PATH(c)	((c) & 0xFF)
+
+#define CCM_GET_DIVIDER(x, m, o) (((x) & (m)) >> (o))
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+static int g_clk_mux_auto[8] = {
+	CLK_CODE(1, 3, 0), CLK_CODE(1, 2, 1), CLK_CODE(2, 1, 1), -1,
+	CLK_CODE(1, 6, 0), CLK_CODE(1, 4, 1), CLK_CODE(2, 2, 1), -1,
+};
+
+static int g_clk_mux_consumer[16] = {
+	CLK_CODE(1, 4, 0), CLK_CODE(1, 3, 1), CLK_CODE(1, 3, 1), -1,
+	-1, -1, CLK_CODE(4, 1, 0), CLK_CODE(1, 5, 0),
+	CLK_CODE(1, 8, 1), CLK_CODE(1, 6, 1), CLK_CODE(2, 4, 0), -1,
+	-1, -1, CLK_CODE(4, 2, 0), -1,
+};
+
+static int hsp_div_table[3][16] = {
+	{4, 3, 2, -1, -1, -1, 1, 5, 4, 3, 2, -1, -1, -1, 1, -1},
+	{-1, -1, -1, -1, -1, -1, -1, -1, 8, 6, 4, -1, -1, -1, 2, -1},
+	{3, -1, -1, -1, -1, -1, -1, -1, 3, -1, -1, -1, -1, -1, -1, -1},
+};
+
+u32 get_cpu_rev(void)
+{
+	int reg;
+	struct iim_regs *iim =
+		(struct iim_regs *)IIM_BASE_ADDR;
+	reg = readl(&iim->iim_srev);
+	if (!reg) {
+		reg = readw(ROMPATCH_REV);
+		reg <<= 4;
+	} else {
+		reg += CHIP_REV_1_0;
+	}
+
+	return 0x35000 + (reg & 0xFF);
+}
+
+static u32 get_arm_div(u32 pdr0, u32 *fi, u32 *fd)
+{
+	int *pclk_mux;
+	if (pdr0 & MXC_CCM_PDR0_AUTO_CON) {
+		pclk_mux = g_clk_mux_consumer +
+			((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >>
+			MXC_CCM_PDR0_CON_MUX_DIV_OFFSET);
+	} else {
+		pclk_mux = g_clk_mux_auto +
+			((pdr0 & MXC_CCM_PDR0_AUTO_MUX_DIV_MASK) >>
+			MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET);
+	}
+
+	if ((*pclk_mux) == -1)
+		return -1;
+
+	if (fi && fd) {
+		if (!CLK_CODE_PATH(*pclk_mux)) {
+			*fi = *fd = 1;
+			return CLK_CODE_ARM(*pclk_mux);
+		}
+		if (pdr0 & MXC_CCM_PDR0_AUTO_CON) {
+			*fi = 3;
+			*fd = 4;
+		} else {
+			*fi = 2;
+			*fd = 3;
+		}
+	}
+	return CLK_CODE_ARM(*pclk_mux);
+}
+
+static int get_ahb_div(u32 pdr0)
+{
+	int *pclk_mux;
+
+	pclk_mux = g_clk_mux_consumer +
+		((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >>
+		MXC_CCM_PDR0_CON_MUX_DIV_OFFSET);
+
+	if ((*pclk_mux) == -1)
+		return -1;
+
+	return CLK_CODE_AHB(*pclk_mux);
+}
+
+static u32 decode_pll(u32 reg, u32 infreq)
+{
+	u32 mfi = (reg >> 10) & 0xf;
+	s32 mfn = reg & 0x3ff;
+	u32 mfd = (reg >> 16) & 0x3ff;
+	u32 pd = (reg >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+	mfn = mfn >= 512 ? mfn - 1024 : mfn;
+	mfd += 1;
+	pd += 1;
+
+	return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
+		mfd * pd);
+}
+
+static u32 get_mcu_main_clk(void)
+{
+	u32 arm_div = 0, fi = 0, fd = 0;
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+	arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd);
+	fi *= decode_pll(readl(&ccm->mpctl), MXC_HCLK);
+	return fi / (arm_div * fd);
+}
+
+static u32 get_ipg_clk(void)
+{
+	u32 freq = get_mcu_main_clk();
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+	u32 pdr0 = readl(&ccm->pdr0);
+
+	return freq / (get_ahb_div(pdr0) * 2);
+}
+
+static u32 get_ipg_per_clk(void)
+{
+	u32 freq = get_mcu_main_clk();
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+	u32 pdr0 = readl(&ccm->pdr0);
+	u32 pdr4 = readl(&ccm->pdr4);
+	u32 div;
+	if (pdr0 & MXC_CCM_PDR0_PER_SEL) {
+		div = CCM_GET_DIVIDER(pdr4,
+			MXC_CCM_PDR4_PER0_PODF_MASK,
+			MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1;
+	} else {
+		div = CCM_GET_DIVIDER(pdr0,
+			MXC_CCM_PDR0_PER_PODF_MASK,
+			MXC_CCM_PDR0_PER_PODF_OFFSET) + 1;
+		div *= get_ahb_div(pdr0);
+	}
+	return freq / div;
+}
+
+u32 imx_get_uartclk(void)
+{
+	u32 freq;
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+	u32 pdr4 = readl(&ccm->pdr4);
+
+	if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U)
+		freq = get_mcu_main_clk();
+	else
+		freq = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
+	freq /= CCM_GET_DIVIDER(pdr4,
+			MXC_CCM_PDR4_UART_PODF_MASK,
+			MXC_CCM_PDR4_UART_PODF_OFFSET) + 1;
+	return freq;
+}
+
+unsigned int mxc_get_main_clock(enum mxc_main_clock clk)
+{
+	u32 nfc_pdf, hsp_podf;
+	u32 pll, ret_val = 0, usb_podf;
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+
+	u32 reg = readl(&ccm->pdr0);
+	u32 reg4 = readl(&ccm->pdr4);
+
+	reg |= 0x1;
+
+	switch (clk) {
+	case CPU_CLK:
+		ret_val = get_mcu_main_clk();
+		break;
+	case AHB_CLK:
+		ret_val = get_mcu_main_clk();
+		break;
+	case HSP_CLK:
+		if (reg & CLKMODE_CONSUMER) {
+			hsp_podf = (reg >> 20) & 0x3;
+			pll = get_mcu_main_clk();
+			hsp_podf = hsp_div_table[hsp_podf][(reg>>16)&0xF];
+			if (hsp_podf > 0) {
+				ret_val = pll / hsp_podf;
+			} else {
+				puts("mismatch HSP with ARM clock setting\n");
+				ret_val = 0;
+			}
+		} else {
+			ret_val = get_mcu_main_clk();
+		}
+		break;
+	case IPG_CLK:
+		ret_val = get_ipg_clk();
+		break;
+	case IPG_PER_CLK:
+		ret_val = get_ipg_per_clk();
+		break;
+	case NFC_CLK:
+		nfc_pdf = (reg4 >> 28) & 0xF;
+		pll = get_mcu_main_clk();
+		/* AHB/nfc_pdf */
+		ret_val = pll / (nfc_pdf + 1);
+		break;
+	case USB_CLK:
+		usb_podf = (reg4 >> 22) & 0x3F;
+		if (reg4 & 0x200)
+			pll = get_mcu_main_clk();
+		else
+			pll = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
+
+		ret_val = pll / (usb_podf + 1);
+		break;
+	default:
+		printf("Unknown clock: %d\n", clk);
+		break;
+	}
+
+	return ret_val;
+}
+unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk)
+{
+	u32 ret_val = 0, pdf, pre_pdf, clk_sel;
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+	u32 mpdr2 = readl(&ccm->pdr2);
+	u32 mpdr3 = readl(&ccm->pdr3);
+	u32 mpdr4 = readl(&ccm->pdr4);
+
+	switch (clk) {
+	case UART1_BAUD:
+	case UART2_BAUD:
+	case UART3_BAUD:
+		clk_sel = mpdr3 & (1 << 14);
+		pdf = (mpdr4 >> 10) & 0x3F;
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
+		break;
+	case SSI1_BAUD:
+		pre_pdf = (mpdr2 >> 24) & 0x7;
+		pdf = mpdr2 & 0x3F;
+		clk_sel = mpdr2 & (1 << 6);
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
+				((pre_pdf + 1) * (pdf + 1));
+		break;
+	case SSI2_BAUD:
+		pre_pdf = (mpdr2 >> 27) & 0x7;
+		pdf = (mpdr2 >> 8) & 0x3F;
+		clk_sel = mpdr2 & (1 << 6);
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
+				((pre_pdf + 1) * (pdf + 1));
+		break;
+	case CSI_BAUD:
+		clk_sel = mpdr2 & (1 << 7);
+		pdf = (mpdr2 >> 16) & 0x3F;
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
+		break;
+	case MSHC_CLK:
+		pre_pdf = readl(&ccm->pdr1);
+		clk_sel = (pre_pdf & 0x80);
+		pdf = (pre_pdf >> 22) & 0x3F;
+		pre_pdf = (pre_pdf >> 28) & 0x7;
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
+				((pre_pdf + 1) * (pdf + 1));
+		break;
+	case ESDHC1_CLK:
+		clk_sel = mpdr3 & 0x40;
+		pdf = mpdr3 & 0x3F;
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
+		break;
+	case ESDHC2_CLK:
+		clk_sel = mpdr3 & 0x40;
+		pdf = (mpdr3 >> 8) & 0x3F;
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
+		break;
+	case ESDHC3_CLK:
+		clk_sel = mpdr3 & 0x40;
+		pdf = (mpdr3 >> 16) & 0x3F;
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
+		break;
+	case SPDIF_CLK:
+		clk_sel = mpdr3 & 0x400000;
+		pre_pdf = (mpdr3 >> 29) & 0x7;
+		pdf = (mpdr3 >> 23) & 0x3F;
+		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
+				((pre_pdf + 1) * (pdf + 1));
+		break;
+	default:
+		printf("%s(): This clock: %d not supported yet\n",
+				__func__, clk);
+		break;
+	}
+
+	return ret_val;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return get_mcu_main_clk();
+	case MXC_AHB_CLK:
+		break;
+	case MXC_IPG_CLK:
+		return get_ipg_clk();
+	case MXC_IPG_PERCLK:
+	case MXC_I2C_CLK:
+		return get_ipg_per_clk();
+	case MXC_UART_CLK:
+		return imx_get_uartclk();
+	case MXC_ESDHC1_CLK:
+		return mxc_get_peri_clock(ESDHC1_CLK);
+	case MXC_ESDHC2_CLK:
+		return mxc_get_peri_clock(ESDHC2_CLK);
+	case MXC_ESDHC3_CLK:
+		return mxc_get_peri_clock(ESDHC3_CLK);
+	case MXC_USB_CLK:
+		return mxc_get_main_clock(USB_CLK);
+	case MXC_FEC_CLK:
+		return get_ipg_clk();
+	case MXC_CSPI_CLK:
+		return get_ipg_clk();
+	}
+	return -1;
+}
+
+#ifdef CONFIG_FEC_MXC
+/*
+ * The MX35 has no fuse for MAC, return a NULL MAC
+ */
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	memset(mac, 0, 6);
+}
+
+u32 imx_get_fecclk(void)
+{
+	return mxc_get_clock(MXC_IPG_CLK);
+}
+#endif
+
+int do_mx35_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	u32 cpufreq = get_mcu_main_clk();
+	printf("mx35 cpu clock: %dMHz\n", cpufreq / 1000000);
+	printf("ipg clock     : %dHz\n", get_ipg_clk());
+	printf("ipg per clock : %dHz\n", get_ipg_per_clk());
+	printf("uart clock    : %dHz\n", mxc_get_clock(MXC_UART_CLK));
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks,
+	"display clocks",
+	""
+);
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+static char *get_reset_cause(void)
+{
+	/* read RCSR register from CCM module */
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+
+	u32 cause = readl(&ccm->rcsr) & 0x0F;
+
+	switch (cause) {
+	case 0x0000:
+		return "POR";
+	case 0x0002:
+		return "JTAG";
+	case 0x0004:
+		return "RST";
+	case 0x0008:
+		return "WDOG";
+	default:
+		return "unknown reset";
+	}
+}
+
+int print_cpuinfo(void)
+{
+	u32 srev = get_cpu_rev();
+
+	printf("CPU:   Freescale i.MX35 rev %d.%d at %d MHz.\n",
+		(srev & 0xF0) >> 4, (srev & 0x0F),
+		get_mcu_main_clk() / 1000000);
+
+	printf("Reset cause: %s\n", get_reset_cause());
+
+	return 0;
+}
+#endif
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(struct bd_info *bis)
+{
+	int rc = -ENODEV;
+
+#if defined(CONFIG_FEC_MXC)
+	rc = fecmxc_initialize(bis);
+#endif
+
+	return rc;
+}
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(struct bd_info *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC_IMX
+#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+#else
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+#endif
+#endif
+	return 0;
+}
+
+#define RCSR_MEM_CTL_WEIM	0
+#define RCSR_MEM_CTL_NAND	1
+#define RCSR_MEM_CTL_ATA	2
+#define RCSR_MEM_CTL_EXPANSION	3
+#define RCSR_MEM_TYPE_NOR	0
+#define RCSR_MEM_TYPE_ONENAND	2
+#define RCSR_MEM_TYPE_SD	0
+#define RCSR_MEM_TYPE_I2C	2
+#define RCSR_MEM_TYPE_SPI	3
+
+u32 spl_boot_device(void)
+{
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+
+	u32 rcsr = readl(&ccm->rcsr);
+	u32 mem_type, mem_ctl;
+
+	/* In external mode, no boot device is returned */
+	if ((rcsr >> 10) & 0x03)
+		return BOOT_DEVICE_NONE;
+
+	mem_ctl = (rcsr >> 25) & 0x03;
+	mem_type = (rcsr >> 23) & 0x03;
+
+	switch (mem_ctl) {
+	case RCSR_MEM_CTL_WEIM:
+		switch (mem_type) {
+		case RCSR_MEM_TYPE_NOR:
+			return BOOT_DEVICE_NOR;
+		case RCSR_MEM_TYPE_ONENAND:
+			return BOOT_DEVICE_ONENAND;
+		default:
+			return BOOT_DEVICE_NONE;
+		}
+	case RCSR_MEM_CTL_NAND:
+		return BOOT_DEVICE_NAND;
+	case RCSR_MEM_CTL_EXPANSION:
+		switch (mem_type) {
+		case RCSR_MEM_TYPE_SD:
+			return BOOT_DEVICE_MMC1;
+		case RCSR_MEM_TYPE_I2C:
+			return BOOT_DEVICE_I2C;
+		case RCSR_MEM_TYPE_SPI:
+			return BOOT_DEVICE_SPI;
+		default:
+			return BOOT_DEVICE_NONE;
+		}
+	}
+
+	return BOOT_DEVICE_NONE;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx35/mx35_sdram.c b/roms/u-boot/arch/arm/cpu/arm1136/mx35/mx35_sdram.c
new file mode 100644
index 000000000..f120e84dc
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx35/mx35_sdram.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012, Stefano Babic <sbabic@denx.de>
+ */
+
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/imx-regs.h>
+#include <linux/types.h>
+#include <asm/arch/sys_proto.h>
+
+#define ESDCTL_DDR2_EMR2	0x04000000
+#define ESDCTL_DDR2_EMR3	0x06000000
+#define ESDCTL_PRECHARGE	0x00000400
+#define ESDCTL_DDR2_EN_DLL	0x02000400
+#define ESDCTL_DDR2_RESET_DLL	0x00000333
+#define ESDCTL_DDR2_MR		0x00000233
+#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780
+
+enum {
+	SMODE_NORMAL =	0,
+	SMODE_PRECHARGE,
+	SMODE_AUTO_REFRESH,
+	SMODE_LOAD_REG,
+	SMODE_MANUAL_REFRESH
+};
+
+#define set_mode(x, en, m)	(x | (en << 31) | (m << 28))
+
+static inline void dram_wait(unsigned int count)
+{
+	volatile unsigned int wait = count;
+
+	while (wait--)
+		;
+
+}
+
+void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config,
+	u32 row, u32 col, u32 dsize, u32 refresh)
+{
+	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
+	u32 *cfg_reg, *ctl_reg;
+	u32 val;
+	u32 ctlval;
+
+	switch (start_address) {
+	case CSD0_BASE_ADDR:
+		cfg_reg = &esdc->esdcfg0;
+		ctl_reg = &esdc->esdctl0;
+		break;
+	case CSD1_BASE_ADDR:
+		cfg_reg = &esdc->esdcfg1;
+		ctl_reg = &esdc->esdctl1;
+		break;
+	default:
+		return;
+	}
+
+	/* The MX35 supports 11 up to 14 rows */
+	if (row < 11 || row > 14 || col < 8 || col > 10)
+		return;
+	ctlval = (row - 11) << 24 | (col - 8) << 20 | (dsize << 16);
+
+	/* Initialize MISC register for DDR2 */
+	val = ESDC_MISC_RST | ESDC_MISC_MDDR_EN | ESDC_MISC_MDDR_DL_RST |
+		ESDC_MISC_DDR_EN | ESDC_MISC_DDR2_EN;
+	writel(val, &esdc->esdmisc);
+	val &= ~(ESDC_MISC_RST | ESDC_MISC_MDDR_DL_RST);
+	writel(val, &esdc->esdmisc);
+
+	/*
+	 * according to DDR2 specs, wait a while before
+	 * the PRECHARGE_ALL command
+	 */
+	dram_wait(0x20000);
+
+	/* Load DDR2 config and timing */
+	writel(ddr2_config, cfg_reg);
+
+	/* Precharge ALL */
+	writel(set_mode(ctlval, 1, SMODE_PRECHARGE),
+		ctl_reg);
+	writel(0xda, start_address + ESDCTL_PRECHARGE);
+
+	/* Load mode */
+	writel(set_mode(ctlval, 1, SMODE_LOAD_REG),
+		ctl_reg);
+	writeb(0xda, start_address + ESDCTL_DDR2_EMR2); /* EMRS2 */
+	writeb(0xda, start_address + ESDCTL_DDR2_EMR3); /* EMRS3 */
+	writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */
+	writeb(0xda, start_address + ESDCTL_DDR2_RESET_DLL); /* Reset DLL */
+
+	/* Precharge ALL */
+	writel(set_mode(ctlval, 1, SMODE_PRECHARGE),
+		ctl_reg);
+	writel(0xda, start_address + ESDCTL_PRECHARGE);
+
+	/* Set mode auto refresh : at least two refresh are required */
+	writel(set_mode(ctlval, 1, SMODE_AUTO_REFRESH),
+		ctl_reg);
+	writel(0xda, start_address);
+	writel(0xda, start_address);
+
+	writel(set_mode(ctlval, 1, SMODE_LOAD_REG),
+		ctl_reg);
+	writeb(0xda, start_address + ESDCTL_DDR2_MR);
+	writeb(0xda, start_address + ESDCTL_DDR2_OCD_DEFAULT);
+
+	/* OCD mode exit */
+	writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */
+
+	/* Set normal mode */
+	writel(set_mode(ctlval, 1, SMODE_NORMAL) | refresh,
+		ctl_reg);
+
+	dram_wait(0x20000);
+
+	/* Do not set delay lines, only for MDDR */
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx35/relocate.S b/roms/u-boot/arch/arm/cpu/arm1136/mx35/relocate.S
new file mode 100644
index 000000000..e41e5a572
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx35/relocate.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  relocate - i.MX35-specific vector relocation
+ *
+ *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * The i.MX35 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM, so let's avoid relocating the vectors.
+ */
+	.section	.text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+	bx	lr
+
+ENDPROC(relocate_vectors)
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/mx35/timer.c b/roms/u-boot/arch/arm/cpu/arm1136/mx35/timer.c
new file mode 100644
index 000000000..f2541c398
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/mx35/timer.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/ptrace.h>
+
+/* General purpose timers bitfields */
+#define GPTCR_SWR       (1<<15)	/* Software reset */
+#define GPTCR_FRR       (1<<9)	/* Freerun / restart */
+#define GPTCR_CLKSOURCE_32   (4<<6)	/* Clock source */
+#define GPTCR_TEN       (1)	/* Timer enable */
+
+/*
+ * nothing really to do with interrupts, just starts up a counter.
+ * The 32KHz 32-bit timer overruns in 134217 seconds
+ */
+int timer_init(void)
+{
+	int i;
+	struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
+	struct ccm_regs *ccm = (struct ccm_regs *)CCM_BASE_ADDR;
+
+	/* setup GP Timer 1 */
+	writel(GPTCR_SWR, &gpt->ctrl);
+
+	writel(readl(&ccm->cgr1) | 3 << MXC_CCM_CGR1_GPT_OFFSET, &ccm->cgr1);
+
+	for (i = 0; i < 100; i++)
+		writel(0, &gpt->ctrl); /* We have no udelay by now */
+	writel(0, &gpt->pre); /* prescaler = 1 */
+	/* Freerun Mode, 32KHz input */
+	writel(readl(&gpt->ctrl) | GPTCR_CLKSOURCE_32 | GPTCR_FRR,
+			&gpt->ctrl);
+	writel(readl(&gpt->ctrl) | GPTCR_TEN, &gpt->ctrl);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/start.S b/roms/u-boot/arch/arm/cpu/arm1136/start.S
new file mode 100644
index 000000000..da7278e59
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/start.S
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for OMP2420/ARM1136 CPU-core
+ *
+ *  Copyright (c) 2004	Texas Instruments <r-woodruff2@ti.com>
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+	/* the mask ROM code should have PLL and others stable */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	bl  cpu_init_crit
+#endif
+
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+	bx	lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* Invalidate I+D+BTB caches */
+	mcr	p15, 0, r0, c8, c7, 0	/* Invalidate Unified TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 1 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+	mcr	p15, 0, r0, c1, c0, 0
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+	/*
+	 * Jump to board specific initialization... The Mask ROM will have already initialized
+	 * basic memory.  Go here to bump up clock rate and handle wake up conditions.
+	 */
+	mov	ip, lr		/* persevere link reg across call */
+	bl	lowlevel_init	/* go setup pll,mux,memory */
+	mov	lr, ip		/* restore link */
+#endif
+	mov	pc, lr		/* back to my caller */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/roms/u-boot/arch/arm/cpu/arm1136/u-boot-spl.lds b/roms/u-boot/arch/arm/cpu/arm1136/u-boot-spl.lds
new file mode 100644
index 000000000..f83988fd7
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1136/u-boot-spl.lds
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ */
+
+MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\
+		LENGTH = IMAGE_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+	__start = .;
+	  *(.vectors)
+	  arch/arm/cpu/arm1136/start.o	(.text*)
+	  *(.text*)
+	} >.sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+	. = ALIGN(4);
+	__image_copy_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} >.sdram
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm1176/Makefile b/roms/u-boot/arch/arm/cpu/arm1176/Makefile
new file mode 100644
index 000000000..32332474f
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1176/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+
+obj- += dummy.o
+extra-y	= start.o
+
+obj-y += ../arm11/
diff --git a/roms/u-boot/arch/arm/cpu/arm1176/start.S b/roms/u-boot/arch/arm/cpu/arm1176/start.S
new file mode 100644
index 000000000..140292468
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm1176/start.S
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for ARM1176 CPU-core
+ *
+ * Copyright (c) 2007	Samsung Electronics
+ *
+ * Copyright (C) 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * 2007-09-21 - Restructured codes by jsgood (jsgood.yang@samsung.com)
+ * 2007-09-21 - Added MoviNAND and OneNAND boot codes by
+ * jsgood (jsgood.yang@samsung.com)
+ * Base codes by scsuh (sc.suh)
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+#ifndef CONFIG_SYS_PHY_UBOOT_BASE
+#define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE
+#endif
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+	.globl reset
+
+reset:
+	/* Allow the board to save important registers */
+	b	save_boot_params
+.globl	save_boot_params_ret
+save_boot_params_ret:
+
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0, cpsr
+	bic	r0, r0, #0x3f
+	orr	r0, r0, #0xd3
+	msr	cpsr, r0
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+cpu_init_crit:
+	/*
+	 * When booting from NAND - it has definitely been a reset, so, no need
+	 * to flush caches and disable the MMU
+	 */
+#ifndef CONFIG_SPL_BUILD
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 1 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+
+	/* Prepare to disable the MMU */
+	adr	r2, mmu_disable_phys
+	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE)
+	b	mmu_disable
+
+	.align 5
+	/* Run in a single cache-line */
+mmu_disable:
+	mcr	p15, 0, r0, c1, c0, 0
+	nop
+	nop
+	mov	pc, r2
+mmu_disable_phys:
+
+#endif
+
+	/*
+	 * Go setup Memory and board specific bits prior to relocation.
+	 */
+	bl	lowlevel_init		/* go setup pll,mux,memory */
+
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+	mov	pc, lr
+
+WEAK(save_boot_params)
+	b	save_boot_params_ret	/* back to my caller */
+ENDPROC(save_boot_params)
diff --git a/roms/u-boot/arch/arm/cpu/arm720t/Makefile b/roms/u-boot/arch/arm/cpu/arm720t/Makefile
new file mode 100644
index 000000000..e70b59061
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm720t/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	= start.o
+obj-y	= interrupts.o cpu.o
diff --git a/roms/u-boot/arch/arm/cpu/arm720t/cpu.c b/roms/u-boot/arch/arm/cpu/arm720t/cpu.c
new file mode 100644
index 000000000..ece09c83a
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm720t/cpu.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+/*
+ * cleanup_before_linux() - Prepare the CPU to jump to Linux
+ *
+ * This function is called just before we call Linux, it
+ * prepares the processor for linux
+ */
+int cleanup_before_linux(void)
+{
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm720t/interrupts.c b/roms/u-boot/arch/arm/cpu/arm720t/interrupts.c
new file mode 100644
index 000000000..f0fc58dea
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm720t/interrupts.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_ARCH_TEGRA)
+static ulong timestamp;
+static ulong lastdec;
+
+int timer_init (void)
+{
+	/* No timer routines for tegra as yet */
+	lastdec = 0;
+	timestamp = 0;
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm720t/start.S b/roms/u-boot/arch/arm/cpu/arm720t/start.S
new file mode 100644
index 000000000..ecb4e44fd
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm720t/start.S
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for ARM720 CPU-core
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from RAM!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
+		!defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+	bl	cpu_init_crit
+#endif
+
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+	mov	pc, lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
+		!defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+cpu_init_crit:
+
+	mov	ip, lr
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependent, you will
+	 * find a lowlevel_init.S in your board directory.
+	 */
+	bl	lowlevel_init
+	mov	lr, ip
+
+	mov	pc, lr
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/Makefile b/roms/u-boot/arch/arm/cpu/arm920t/Makefile
new file mode 100644
index 000000000..c63f578f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	= start.o
+
+obj-y	+= cpu.o
+
+obj-$(CONFIG_EP93XX) += ep93xx/
+obj-$(CONFIG_IMX) += imx/
+
+# some files can only build in ARM mode
+
+ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+CFLAGS_cpu.o := -marm
+endif
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/cpu.c b/roms/u-boot/arch/arm/cpu/arm920t/cpu.c
new file mode 100644
index 000000000..305713e78
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/cpu.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/system.h>
+
+static void cache_flush(void);
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	disable_interrupts();
+
+	/* turn off I/D-cache */
+	icache_disable();
+	dcache_disable();
+	/* flush I/D-cache */
+	cache_flush();
+
+	return 0;
+}
+
+/* flush I/D-cache */
+static void cache_flush (void)
+{
+	unsigned long i = 0;
+
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/Makefile b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/Makefile
new file mode 100644
index 000000000..152b5e7c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Cirrus Logic EP93xx CPU-specific Makefile
+#
+# Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+#
+# Copyright (C) 2004, 2005
+# Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
+#
+# Copyright (C) 2006
+# Dominic Rath <Dominic.Rath@gmx.de>
+#
+# Based on an original Makefile, which is
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y   = cpu.o led.o speed.o timer.o
+obj-y   += lowlevel_init.o
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/cpu.c b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/cpu.c
new file mode 100644
index 000000000..3435bdc74
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/cpu.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Cirrus Logic EP93xx CPU-specific support.
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2004, 2005
+ * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/arch/ep93xx.h>
+#include <asm/io.h>
+
+/* We reset the CPU by generating a 1-->0 transition on DeviceCfg bit 31. */
+extern void reset_cpu(void)
+{
+	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+	uint32_t value;
+
+	/* Unlock DeviceCfg and set SWRST */
+	writel(0xAA, &syscon->sysswlock);
+	value = readl(&syscon->devicecfg);
+	value |= SYSCON_DEVICECFG_SWRST;
+	writel(value, &syscon->devicecfg);
+
+	/* Unlock DeviceCfg and clear SWRST */
+	writel(0xAA, &syscon->sysswlock);
+	value = readl(&syscon->devicecfg);
+	value &= ~SYSCON_DEVICECFG_SWRST;
+	writel(value, &syscon->devicecfg);
+
+	/* Dying... */
+	while (1)
+		; /* noop */
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/led.c b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/led.c
new file mode 100644
index 000000000..862663acb
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/led.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010, 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ */
+
+#include <asm/io.h>
+#include <asm/arch/ep93xx.h>
+#include <config.h>
+#include <status_led.h>
+
+static uint8_t saved_state[2] = {CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_OFF};
+static uint32_t gpio_pin[2] = {1 << CONFIG_LED_STATUS_GREEN,
+			       1 << CONFIG_LED_STATUS_RED};
+
+static inline void switch_LED_on(uint8_t led)
+{
+	register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
+
+	writel(readl(&gpio->pedr) | gpio_pin[led], &gpio->pedr);
+	saved_state[led] = CONFIG_LED_STATUS_ON;
+}
+
+static inline void switch_LED_off(uint8_t led)
+{
+	register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
+
+	writel(readl(&gpio->pedr) & ~gpio_pin[led], &gpio->pedr);
+	saved_state[led] = CONFIG_LED_STATUS_OFF;
+}
+
+void red_led_on(void)
+{
+	switch_LED_on(CONFIG_LED_STATUS_RED);
+}
+
+void red_led_off(void)
+{
+	switch_LED_off(CONFIG_LED_STATUS_RED);
+}
+
+void green_led_on(void)
+{
+	switch_LED_on(CONFIG_LED_STATUS_GREEN);
+}
+
+void green_led_off(void)
+{
+	switch_LED_off(CONFIG_LED_STATUS_GREEN);
+}
+
+void __led_init(led_id_t mask, int state)
+{
+	__led_set(mask, state);
+}
+
+void __led_toggle(led_id_t mask)
+{
+	if (CONFIG_LED_STATUS_RED == mask) {
+		if (CONFIG_LED_STATUS_ON == saved_state[CONFIG_LED_STATUS_RED])
+			red_led_off();
+		else
+			red_led_on();
+	} else if (CONFIG_LED_STATUS_GREEN == mask) {
+		if (CONFIG_LED_STATUS_ON ==
+		    saved_state[CONFIG_LED_STATUS_GREEN])
+			green_led_off();
+		else
+			green_led_on();
+	}
+}
+
+void __led_set(led_id_t mask, int state)
+{
+	if (CONFIG_LED_STATUS_RED == mask) {
+		if (CONFIG_LED_STATUS_ON == state)
+			red_led_on();
+		else
+			red_led_off();
+	} else if (CONFIG_LED_STATUS_GREEN == mask) {
+		if (CONFIG_LED_STATUS_ON == state)
+			green_led_on();
+		else
+			green_led_off();
+	}
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
new file mode 100644
index 000000000..5239b1053
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
@@ -0,0 +1,457 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Low-level initialization for EP93xx
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ * Copyright (C) 2013
+ * Sergey Kostanabev <sergey.kostanbaev <at> fairwaves.ru>
+ *
+ * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
+ * Copyright (C) 2006 Cirrus Logic Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ */
+
+#include <config.h>
+#include <asm/arch-ep93xx/ep93xx.h>
+
+/*
+/* Configure the SDRAM based on the supplied settings.
+ *
+ * Input:	r0 - SDRAM DEVCFG register
+ *		r2 - configuration for SDRAM chips
+ * Output:	none
+ * Modifies:	r3, r4
+ */
+ep93xx_sdram_config:
+	/* Program the SDRAM device configuration register. */
+	ldr	r3, =SDRAM_BASE
+#ifdef CONFIG_EDB93XX_SDCS0
+	str	r0, [r3, #SDRAM_OFF_DEVCFG0]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS1
+	str	r0, [r3, #SDRAM_OFF_DEVCFG1]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS2
+	str	r0, [r3, #SDRAM_OFF_DEVCFG2]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS3
+	str	r0, [r3, #SDRAM_OFF_DEVCFG3]
+#endif
+
+	/* Set the Initialize and MRS bits (issue continuous NOP commands
+	 * (INIT & MRS set))
+	 */
+	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \
+			EP93XX_SDRAMCTRL_GLOBALCFG_MRS | \
+			EP93XX_SDRAMCTRL_GLOBALCFG_CKE)
+	str	r4, [r3, #SDRAM_OFF_GLCONFIG]
+
+	/* Delay for 200us. */
+	mov	r4, #0x3000
+delay1:
+	subs	r4, r4, #1
+	bne	delay1
+
+	/* Clear the MRS bit to issue a precharge all. */
+	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \
+			EP93XX_SDRAMCTRL_GLOBALCFG_CKE)
+	str	r4, [r3, #SDRAM_OFF_GLCONFIG]
+
+	/* Temporarily set the refresh timer to 0x10. Make it really low so
+	 * that refresh cycles are generated.
+	 */
+	ldr	r4, =0x10
+	str	r4, [r3, #SDRAM_OFF_REFRSHTIMR]
+
+	/* Delay for at least 80 SDRAM clock cycles. */
+	mov	r4, #80
+delay2:
+	subs	r4, r4, #1
+	bne	delay2
+
+	/* Set the refresh timer to the fastest required for any device
+	 * that might be used. Set 9.6 ms refresh time.
+	 */
+	ldr	r4, =0x01e0
+	str	r4, [r3, #SDRAM_OFF_REFRSHTIMR]
+
+	/* Select mode register update mode. */
+	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_CKE | \
+			EP93XX_SDRAMCTRL_GLOBALCFG_MRS)
+	str	r4, [r3, #SDRAM_OFF_GLCONFIG]
+
+	/* Program the mode register on the SDRAM by performing fake read */
+	ldr	r4, [r2]
+
+	/* Select normal operating mode. */
+	ldr	r4, =EP93XX_SDRAMCTRL_GLOBALCFG_CKE
+	str	r4, [r3, #SDRAM_OFF_GLCONFIG]
+
+	/* Return to the caller. */
+	mov	pc, lr
+
+/*
+ * Test to see if the SDRAM has been configured in a usable mode.
+ *
+ * Input:	r0 - Test address of SDRAM
+ * Output:	r0 - 0 -- Test OK, -1 -- Failed
+ * Modifies:	r0-r5
+ */
+ep93xx_sdram_test:
+	/* Load the test patterns to be written to SDRAM. */
+	ldr	r1, =0xf00dface
+	ldr	r2, =0xdeadbeef
+	ldr	r3, =0x08675309
+	ldr	r4, =0xdeafc0ed
+
+	/* Store the test patterns to SDRAM. */
+	stmia	r0, {r1-r4}
+
+	/* Load the test patterns from SDRAM one at a time and compare them
+	 * to the actual pattern.
+	 */
+	ldr	r5, [r0]
+	cmp	r5, r1
+	ldreq	r5, [r0, #0x0004]
+	cmpeq	r5, r2
+	ldreq	r5, [r0, #0x0008]
+	cmpeq	r5, r3
+	ldreq	r5, [r0, #0x000c]
+	cmpeq	r5, r4
+
+	/* Return -1 if a mismatch was encountered, 0 otherwise. */
+	mvnne	r0, #0xffffffff
+	moveq	r0, #0x00000000
+
+	/* Return to the caller. */
+	mov	pc, lr
+
+/*
+ * Determine the size of the SDRAM. Use data=address for the scan.
+ *
+ * Input:	r0 - Start SDRAM address
+ * Return:	r0 - Single block size
+ *		r1 - Valid block mask
+ *		r2 - Total block count
+ * Modifies:	r0-r5
+ */
+ep93xx_sdram_size:
+	/* Store zero at offset zero. */
+	str	r0, [r0]
+
+	/* Start checking for an alias at 1MB into SDRAM. */
+	ldr	r1, =0x00100000
+
+	/* Store the offset at the current offset. */
+check_block_size:
+	str	r1, [r0, r1]
+
+	/* Read back from zero. */
+	ldr	r2, [r0]
+
+	/* Stop searching of an alias was found. */
+	cmp	r1, r2
+	beq	found_block_size
+
+	/* Advance to the next power of two boundary. */
+	mov	r1, r1, lsl #1
+
+	/* Loop back if the size has not reached 256MB. */
+	cmp	r1, #0x10000000
+	bne	check_block_size
+
+	/* A full 256MB of memory was found, so return it now. */
+	ldr	r0, =0x10000000
+	ldr	r1, =0x00000000
+	ldr	r2, =0x00000001
+	mov	pc, lr
+
+	/* An alias was found. See if the first block is 128MB in size. */
+found_block_size:
+	cmp	r1, #0x08000000
+
+	/* The first block is 128MB, so there is no further memory. Return it
+	 * now.
+	 */
+	ldreq	r0, =0x08000000
+	ldreq	r1, =0x00000000
+	ldreq	r2, =0x00000001
+	moveq	pc, lr
+
+	/* Save the block size, set the block address bits to zero, and
+	 * initialize the block count to one.
+	 */
+	mov	r3, r1
+	ldr	r4, =0x00000000
+	ldr	r5, =0x00000001
+
+	/* Look for additional blocks of memory by searching for non-aliases. */
+find_blocks:
+	/* Store zero back to address zero. It may be overwritten. */
+	str	r0, [r0]
+
+	/* Advance to the next power of two boundary. */
+	mov	r1, r1, lsl #1
+
+	/* Store the offset at the current offset. */
+	str	r1, [r0, r1]
+
+	/* Read back from zero. */
+	ldr	r2, [r0]
+
+	/* See if a non-alias was found. */
+	cmp	r1, r2
+
+	/* If a non-alias was found, then or in the block address bit and
+	 * multiply the block count by two (since there are two unique
+	 * blocks, one with this bit zero and one with it one).
+	 */
+	orrne	r4, r4, r1
+	movne	r5, r5, lsl #1
+
+	/* Continue searching if there are more address bits to check. */
+	cmp	r1, #0x08000000
+	bne	find_blocks
+
+	/* Return the block size, address mask, and count. */
+	mov	r0, r3
+	mov	r1, r4
+	mov	r2, r5
+
+	/* Return to the caller. */
+	mov	pc, lr
+
+
+.globl lowlevel_init
+lowlevel_init:
+
+	mov	r6, lr
+
+	/* Make sure caches are off and invalidated. */
+	ldr	r0, =0x00000000
+	mcr	p15, 0, r0, c1, c0, 0
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* Turn off the green LED and turn on the red LED. If the red LED
+	 * is left on for too long, the external reset circuit described
+	 * by application note AN258 will cause the system to reset.
+	 */
+	ldr	r1, =EP93XX_LED_DATA
+	ldr	r0, [r1]
+	bic	r0, r0, #EP93XX_LED_GREEN_ON
+	orr	r0, r0, #EP93XX_LED_RED_ON
+	str	r0, [r1]
+
+	/* Undo the silly static memory controller programming performed
+	 * by the boot rom.
+	 */
+	ldr	r0, =SMC_BASE
+
+	/* Set WST1 and WST2 to 31 HCLK cycles (slowest access) */
+	ldr	r1, =0x0000fbe0
+
+	/* Reset EP93XX_OFF_SMCBCR0 */
+	ldr	r2, [r0]
+	orr	r2, r2, r1
+	str	r2, [r0]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR1]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR1]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR2]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR2]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR3]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR3]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR6]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR6]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR7]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR7]
+
+	/* Set the PLL1 and processor clock. */
+	ldr	r0, =SYSCON_BASE
+#ifdef CONFIG_EDB9301
+	/* 332MHz, giving a 166MHz processor clock. */
+	ldr	r1, = 0x02b49907
+#else
+
+#ifdef CONFIG_EDB93XX_INDUSTRIAL
+	/* 384MHz, giving a 196MHz processor clock. */
+	ldr	r1, =0x02a4bb38
+#else
+	/* 400MHz, giving a 200MHz processor clock. */
+	ldr	r1, =0x02a4e39e
+#endif
+#endif
+	str	r1, [r0, #SYSCON_OFF_CLKSET1]
+
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* Need to make sure that SDRAM is configured correctly before
+	 * coping the code into it.
+	 */
+
+#ifdef CONFIG_EDB93XX_SDCS0
+	mov	r11, #SDRAM_DEVCFG0_BASE
+#endif
+#ifdef CONFIG_EDB93XX_SDCS1
+	mov	r11, #SDRAM_DEVCFG1_BASE
+#endif
+#ifdef CONFIG_EDB93XX_SDCS2
+	mov	r11, #SDRAM_DEVCFG2_BASE
+#endif
+#ifdef CONFIG_EDB93XX_SDCS3
+	ldr	r0, =SYSCON_BASE
+	ldr	r0, [r0, #SYSCON_OFF_SYSCFG]
+	ands	r0, r0, #SYSCON_SYSCFG_LASDO
+	moveq	r11, #SDRAM_DEVCFG3_ASD0_BASE
+	movne	r11, #SDRAM_DEVCFG3_ASD1_BASE
+#endif
+	/* See Table 13-5 in EP93xx datasheet for more info about DRAM
+	 * register mapping */
+
+	/* Try a 32-bit wide configuration of SDRAM. */
+	ldr	r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \
+			EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \
+			EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \
+			EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2)
+
+	/* Set burst count: 4 and CAS: 2
+	 * Burst mode [A11:A10]; CAS [A16:A14]
+	 */
+	orr	r2, r11, #0x00008800
+	bl	ep93xx_sdram_config
+
+	/* Test the SDRAM. */
+	mov	r0, r11
+	bl	ep93xx_sdram_test
+	cmp	r0, #0x00000000
+	beq	ep93xx_sdram_done
+
+	/* Try a 16-bit wide configuration of SDRAM. */
+	ldr	r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \
+			EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \
+			EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \
+			EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2 | \
+			EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH)
+
+	/* Set burst count: 8, CAS: 2, sequential burst
+	 * Accoring to Table 13-3 for 16bit operations mapping must be shifted.
+	 * Burst mode [A10:A9]; CAS [A15:A13]
+	 */
+	orr	r2, r11, #0x00004600
+	bl	ep93xx_sdram_config
+
+	/* Test the SDRAM. */
+	mov	r0, r11
+	bl	ep93xx_sdram_test
+	cmp	r0, #0x00000000
+	beq	ep93xx_sdram_done
+
+	/* Turn off the red LED. */
+	ldr	r0, =EP93XX_LED_DATA
+	ldr	r1, [r0]
+	bic	r1, r1, #EP93XX_LED_RED_ON
+	str	r1, [r0]
+
+	/* There is no SDRAM so flash the green LED. */
+flash_green:
+	orr	r1, r1, #EP93XX_LED_GREEN_ON
+	str	r1, [r0]
+	ldr	r2, =0x00010000
+flash_green_delay_1:
+	subs	r2, r2, #1
+	bne	flash_green_delay_1
+	bic	r1, r1, #EP93XX_LED_GREEN_ON
+	str	r1, [r0]
+	ldr	r2, =0x00010000
+flash_green_delay_2:
+	subs	r2, r2, #1
+	bne	flash_green_delay_2
+	orr	r1, r1, #EP93XX_LED_GREEN_ON
+	str	r1, [r0]
+	ldr	r2, =0x00010000
+flash_green_delay_3:
+	subs	r2, r2, #1
+	bne	flash_green_delay_3
+	bic	r1, r1, #EP93XX_LED_GREEN_ON
+	str	r1, [r0]
+	ldr	r2, =0x00050000
+flash_green_delay_4:
+	subs	r2, r2, #1
+	bne	flash_green_delay_4
+	b	flash_green
+
+
+ep93xx_sdram_done:
+	ldr	r1, =EP93XX_LED_DATA
+	ldr	r0, [r1]
+	bic	r0, r0, #EP93XX_LED_RED_ON
+	str	r0, [r1]
+
+	/* Determine the size of the SDRAM. */
+	mov	r0, r11
+	bl	ep93xx_sdram_size
+
+	/* Save the SDRAM characteristics. */
+	mov	r8, r0
+	mov	r9, r1
+	mov	r10, r2
+
+	/* Compute total memory size into r1 */
+	mul	r1, r8, r10
+#ifdef CONFIG_EDB93XX_SDCS0
+	ldr	r2, [r0, #SDRAM_OFF_DEVCFG0]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS1
+	ldr	r2, [r0, #SDRAM_OFF_DEVCFG1]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS2
+	ldr	r2, [r0, #SDRAM_OFF_DEVCFG2]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS3
+	ldr	r2, [r0, #SDRAM_OFF_DEVCFG3]
+#endif
+
+	/* Consider small DRAM size as:
+	 * < 32Mb for 32bit bus
+	 * < 64Mb for 16bit bus
+	 */
+	tst	r2, #EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH
+	moveq	r1, r1, lsr #1
+	cmp	r1, #0x02000000
+
+#if defined(CONFIG_EDB9301)
+	/* Set refresh counter to 20ms for small DRAM size, otherwise 9.6ms */
+	movlt	r1, #0x03f0
+	movge	r1, #0x01e0
+#else
+	/* Set refresh counter to 30.7ms for small DRAM size, otherwise 15ms */
+	movlt	r1, #0x0600
+	movge	r1, #0x2f0
+#endif
+	str	r1, [r0, #SDRAM_OFF_REFRSHTIMR]
+
+	/* Save the memory configuration information. */
+	orr	r0, r11, #UBOOT_MEMORYCNF_BANK_SIZE
+	stmia	r0, {r8-r11}
+
+	mov	lr, r6
+	mov	pc, lr
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/speed.c b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/speed.c
new file mode 100644
index 000000000..51e9dda05
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/speed.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Cirrus Logic EP93xx PLL support.
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ */
+
+#include <common.h>
+#include <asm/arch/ep93xx.h>
+#include <asm/io.h>
+#include <div64.h>
+
+/*
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ *
+ * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
+ * the specified bus in HZ.
+ */
+
+/*
+ * return the PLL output frequency
+ *
+ * PLL rate = CONFIG_SYS_CLK_FREQ * (X1FBD + 1) * (X2FBD + 1)
+ * / (X2IPD + 1) / 2^PS
+ */
+static ulong get_PLLCLK(uint32_t *pllreg)
+{
+	uint8_t i;
+	const uint32_t clkset = readl(pllreg);
+	uint64_t rate = CONFIG_SYS_CLK_FREQ;
+	rate *= ((clkset >> SYSCON_CLKSET_PLL_X1FBD1_SHIFT) & 0x1f) + 1;
+	rate *= ((clkset >> SYSCON_CLKSET_PLL_X2FBD2_SHIFT) & 0x3f) + 1;
+	do_div(rate, (clkset  & 0x1f) + 1);			/* X2IPD */
+	for (i = 0; i < ((clkset >> SYSCON_CLKSET_PLL_PS_SHIFT) & 3); i++)
+		rate >>= 1;
+
+	return (ulong)rate;
+}
+
+/* return FCLK frequency */
+ulong get_FCLK(void)
+{
+	const uint8_t fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
+	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+
+	const uint32_t clkset1 = readl(&syscon->clkset1);
+	const uint8_t fclk_div =
+		fclk_divisors[(clkset1 >> SYSCON_CLKSET1_FCLK_DIV_SHIFT) & 7];
+	const ulong fclk_rate = get_PLLCLK(&syscon->clkset1) / fclk_div;
+
+	return fclk_rate;
+}
+
+/* return HCLK frequency */
+ulong get_HCLK(void)
+{
+	const uint8_t hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
+	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+
+	const uint32_t clkset1 = readl(&syscon->clkset1);
+	const uint8_t hclk_div =
+		hclk_divisors[(clkset1 >> SYSCON_CLKSET1_HCLK_DIV_SHIFT) & 7];
+	const ulong hclk_rate = get_PLLCLK(&syscon->clkset1) / hclk_div;
+
+	return hclk_rate;
+}
+
+/* return PCLK frequency */
+ulong get_PCLK(void)
+{
+	const uint8_t pclk_divisors[] = { 1, 2, 4, 8 };
+	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+
+	const uint32_t clkset1 = readl(&syscon->clkset1);
+	const uint8_t pclk_div =
+		pclk_divisors[(clkset1 >> SYSCON_CLKSET1_PCLK_DIV_SHIFT) & 3];
+	const ulong pclk_rate = get_HCLK() / pclk_div;
+
+	return pclk_rate;
+}
+
+/* return UCLK frequency */
+ulong get_UCLK(void)
+{
+	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+	ulong uclk_rate;
+
+	const uint32_t value = readl(&syscon->pwrcnt);
+	if (value & SYSCON_PWRCNT_UART_BAUD)
+		uclk_rate = CONFIG_SYS_CLK_FREQ;
+	else
+		uclk_rate = CONFIG_SYS_CLK_FREQ / 2;
+
+	return uclk_rate;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/timer.c b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/timer.c
new file mode 100644
index 000000000..892bb06db
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/ep93xx/timer.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Cirrus Logic EP93xx timer support.
+ *
+ * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2004, 2005
+ * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
+ *
+ * Based on the original intr.c Cirrus Logic EP93xx Rev D. interrupt support,
+ * author unknown.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <asm/arch/ep93xx.h>
+#include <asm/io.h>
+#include <div64.h>
+
+#define TIMER_CLKSEL	(1 << 3)
+#define TIMER_ENABLE	(1 << 7)
+
+#define TIMER_FREQ			508469		/* ticks / second */
+#define TIMER_MAX_VAL			0xFFFFFFFF
+
+static struct ep93xx_timer
+{
+	unsigned long long ticks;
+	unsigned long last_read;
+} timer;
+
+static inline unsigned long long usecs_to_ticks(unsigned long usecs)
+{
+	unsigned long long ticks = (unsigned long long)usecs * TIMER_FREQ;
+	do_div(ticks, 1000 * 1000);
+
+	return ticks;
+}
+
+static inline void read_timer(void)
+{
+	struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
+	const unsigned long now = TIMER_MAX_VAL - readl(&timer_regs->timer3.value);
+
+	if (now >= timer.last_read)
+		timer.ticks += now - timer.last_read;
+	else
+		/* an overflow occurred */
+		timer.ticks += TIMER_MAX_VAL - timer.last_read + now;
+
+	timer.last_read = now;
+}
+
+/*
+ * Get the number of ticks (in CONFIG_SYS_HZ resolution)
+ */
+unsigned long long get_ticks(void)
+{
+	unsigned long long sys_ticks;
+
+	read_timer();
+
+	sys_ticks = timer.ticks * CONFIG_SYS_HZ;
+	do_div(sys_ticks, TIMER_FREQ);
+
+	return sys_ticks;
+}
+
+unsigned long get_timer(unsigned long base)
+{
+	return get_ticks() - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned long long target;
+
+	read_timer();
+
+	target = timer.ticks + usecs_to_ticks(usec);
+
+	while (timer.ticks < target)
+		read_timer();
+}
+
+int timer_init(void)
+{
+	struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
+
+	/* use timer 3 with 508KHz and free running, not enabled now */
+	writel(TIMER_CLKSEL, &timer_regs->timer3.control);
+
+	/* set initial timer value */
+	writel(TIMER_MAX_VAL, &timer_regs->timer3.load);
+
+	/* Enable the timer */
+	writel(TIMER_ENABLE | TIMER_CLKSEL,
+		&timer_regs->timer3.control);
+
+	/* Reset the timer */
+	read_timer();
+	timer.ticks = 0;
+
+	return 0;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+unsigned long get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/imx/Makefile b/roms/u-boot/arch/arm/cpu/arm920t/imx/Makefile
new file mode 100644
index 000000000..04bc12959
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/imx/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	+= generic.o
+obj-y	+= speed.o
+obj-y	+= timer.o
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/imx/generic.c b/roms/u-boot/arch/arm/cpu/arm920t/imx/generic.c
new file mode 100644
index 000000000..dbb908ecd
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/imx/generic.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  arch/arm/mach-imx/generic.c
+ *
+ *  author: Sascha Hauer
+ *  Created: april 20th, 2004
+ *  Copyright: Synertronixx GmbH
+ *
+ *  Common code for i.MX machines
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_IMX
+
+#include <asm/arch/imx-regs.h>
+
+void imx_gpio_mode(int gpio_mode)
+{
+	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
+	unsigned int tmp;
+
+	/* Pullup enable */
+	if(gpio_mode & GPIO_PUEN)
+		PUEN(port) |= (1<<pin);
+	else
+		PUEN(port) &= ~(1<<pin);
+
+	/* Data direction */
+	if(gpio_mode & GPIO_OUT)
+		DDIR(port) |= 1<<pin;
+	else
+		DDIR(port) &= ~(1<<pin);
+
+	/* Primary / alternate function */
+	if(gpio_mode & GPIO_AF)
+		GPR(port) |= (1<<pin);
+	else
+		GPR(port) &= ~(1<<pin);
+
+	/* use as gpio? */
+	if( ocr == 3 )
+		GIUS(port) |= (1<<pin);
+	else
+		GIUS(port) &= ~(1<<pin);
+
+	/* Output / input configuration */
+	/* FIXME: I'm not very sure about OCR and ICONF, someone
+	 * should have a look over it
+	 */
+	if(pin<16) {
+		tmp = OCR1(port);
+		tmp &= ~( 3<<(pin*2));
+		tmp |= (ocr << (pin*2));
+		OCR1(port) = tmp;
+
+		if( gpio_mode &	GPIO_AOUT )
+			ICONFA1(port) &= ~( 3<<(pin*2));
+		if( gpio_mode &	GPIO_BOUT )
+			ICONFB1(port) &= ~( 3<<(pin*2));
+	} else {
+		tmp = OCR2(port);
+		tmp &= ~( 3<<((pin-16)*2));
+		tmp |= (ocr << ((pin-16)*2));
+		OCR2(port) = tmp;
+
+		if( gpio_mode &	GPIO_AOUT )
+			ICONFA2(port) &= ~( 3<<((pin-16)*2));
+		if( gpio_mode &	GPIO_BOUT )
+			ICONFB2(port) &= ~( 3<<((pin-16)*2));
+	}
+}
+
+#endif /* CONFIG_IMX */
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/imx/speed.c b/roms/u-boot/arch/arm/cpu/arm920t/imx/speed.c
new file mode 100644
index 000000000..eff611319
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/imx/speed.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ */
+
+
+#include <common.h>
+#if defined (CONFIG_IMX)
+
+#include <asm/arch/imx-regs.h>
+
+/* ------------------------------------------------------------------------- */
+/* NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ * SH FIXME: 16780000 in our case
+ * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+ulong get_systemPLLCLK(void)
+{
+	/* FIXME: We assume System_SEL = 0 here */
+	u32 spctl0 = SPCTL0;
+	u32 mfi = (spctl0 >> 10) & 0xf;
+	u32 mfn = spctl0 & 0x3f;
+	u32 mfd = (spctl0 >> 16) & 0x3f;
+	u32 pd =  (spctl0 >> 26) & 0xf;
+
+	mfi = mfi<=5 ? 5 : mfi;
+
+	return (2*(CONFIG_SYSPLL_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
+}
+
+ulong get_mcuPLLCLK(void)
+{
+	/* FIXME: We assume System_SEL = 0 here */
+	u32 mpctl0 = MPCTL0;
+	u32 mfi = (mpctl0 >> 10) & 0xf;
+	u32 mfn = mpctl0 & 0x3f;
+	u32 mfd = (mpctl0 >> 16) & 0x3f;
+	u32 pd =  (mpctl0 >> 26) & 0xf;
+
+	mfi = mfi<=5 ? 5 : mfi;
+
+	return (2*(CONFIG_SYS_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
+}
+
+ulong get_FCLK(void)
+{
+	return (( CSCR>>15)&1) ? get_mcuPLLCLK()>>1 : get_mcuPLLCLK();
+}
+
+/* return HCLK frequency */
+ulong get_HCLK(void)
+{
+	u32 bclkdiv = (( CSCR >> 10 ) & 0xf) + 1;
+	printf("bclkdiv: %d\n", bclkdiv);
+	return get_systemPLLCLK() / bclkdiv;
+}
+
+/* return BCLK frequency */
+ulong get_BCLK(void)
+{
+	return get_HCLK();
+}
+
+ulong get_PERCLK1(void)
+{
+	return get_systemPLLCLK() / (((PCDR) & 0xf)+1);
+}
+
+ulong get_PERCLK2(void)
+{
+	return get_systemPLLCLK() / (((PCDR>>4) & 0xf)+1);
+}
+
+ulong get_PERCLK3(void)
+{
+	return get_systemPLLCLK() / (((PCDR>>16) & 0x7f)+1);
+}
+
+#endif /* defined (CONFIG_IMX) */
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/imx/timer.c b/roms/u-boot/arch/arm/cpu/arm920t/imx/timer.c
new file mode 100644
index 000000000..0cd3a0398
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/imx/timer.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <time.h>
+#if defined (CONFIG_IMX)
+
+#include <asm/arch/imx-regs.h>
+#include <linux/delay.h>
+
+int timer_init (void)
+{
+	int i;
+	/* setup GP Timer 1 */
+	TCTL1 = TCTL_SWR;
+	for ( i=0; i<100; i++) TCTL1 = 0; /* We have no udelay by now */
+	TPRER1 = get_PERCLK1() / 1000000; /* 1 MHz */
+	TCTL1 |= TCTL_FRR | (1<<1); /* Freerun Mode, PERCLK1 input */
+
+	/* Reset the timer */
+	TCTL1 &= ~TCTL_TEN;
+	TCTL1 |= TCTL_TEN; /* Enable timer */
+
+	return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+static ulong get_timer_masked (void)
+{
+	return TCN1;
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	ulong endtime = get_timer_masked() + usec;
+	signed long diff;
+
+	do {
+		ulong now = get_timer_masked ();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
+
+/*
+ * Reset the cpu by setting up the watchdog timer and let him time out
+ */
+void reset_cpu(void)
+{
+	/* Disable watchdog and set Time-Out field to 0 */
+	WCR = 0x00000000;
+
+	/* Write Service Sequence */
+	WSR = 0x00005555;
+	WSR = 0x0000AAAA;
+
+	/* Enable watchdog */
+	WCR = 0x00000001;
+
+	while (1);
+	/*NOTREACHED*/
+}
+
+#endif /* defined (CONFIG_IMX) */
diff --git a/roms/u-boot/arch/arm/cpu/arm920t/start.S b/roms/u-boot/arch/arm/cpu/arm920t/start.S
new file mode 100644
index 000000000..e9326f4b5
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm920t/start.S
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for ARM920 CPU-core
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ */
+
+#include <asm-offsets.h>
+#include <common.h>
+#include <config.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (called from the ARM reset exception vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0, cpsr
+	bic	r0, r0, #0x1f
+	orr	r0, r0, #0xd3
+	msr	cpsr, r0
+
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK)
+	/*
+	 * relocate exception table
+	 */
+	ldr	r0, =_start
+	ldr	r1, =0x0
+	mov	r2, #16
+copyex:
+	subs	r2, r2, #1
+	ldr	r3, [r0], #4
+	str	r3, [r1], #4
+	bne	copyex
+#endif
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	bl	cpu_init_crit
+#endif
+
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+	mov	pc, lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 1 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+	mcr	p15, 0, r0, c1, c0, 0
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a lowlevel_init.S in your board directory.
+	 */
+	mov	ip, lr
+
+	bl	lowlevel_init
+	mov	lr, ip
+#endif
+	mov	pc, lr
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/Makefile b/roms/u-boot/arch/arm/cpu/arm926ejs/Makefile
new file mode 100644
index 000000000..98aafe805
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/Makefile
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	= start.o
+obj-y	= cpu.o cache.o
+
+ifdef	CONFIG_SPL_BUILD
+ifdef	CONFIG_SPL_NO_CPU_SUPPORT
+extra-y	:=
+endif
+endif
+
+obj-$(CONFIG_ARMADA100) += armada100/
+obj-$(CONFIG_MX25) += mx25/
+obj-$(CONFIG_MX27) += mx27/
+obj-$(if $(filter mxs,$(SOC)),y) += mxs/
+obj-$(if $(filter spear,$(SOC)),y) += spear/
+
+# some files can only build in ARM or THUMB2, not THUMB1
+
+ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+ifndef CONFIG_HAS_THUMB2
+
+CFLAGS_cpu.o := -marm
+CFLAGS_cache.o := -marm
+CFLAGS_REMOVE_cpu.o := $(LTO_CFLAGS)
+CFLAGS_REMOVE_cache.o := $(LTO_CFLAGS)
+
+endif
+endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/Makefile b/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/Makefile
new file mode 100644
index 000000000..77ac0e262
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+obj-y	= cpu.o timer.o dram.o
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/cpu.c b/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/cpu.c
new file mode 100644
index 000000000..96726b314
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/cpu.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/armada100.h>
+
+#define UARTCLK14745KHZ	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
+#define SET_MRVL_ID	(1<<8)
+#define L2C_RAM_SEL	(1<<4)
+
+int arch_cpu_init(void)
+{
+	u32 val;
+	struct armd1cpu_registers *cpuregs =
+		(struct armd1cpu_registers *) ARMD1_CPU_BASE;
+
+	struct armd1apb1_registers *apb1clkres =
+		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
+
+	struct armd1mpmu_registers *mpmu =
+		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
+
+	/* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */
+	val = readl(&cpuregs->cpu_conf);
+	val = val | SET_MRVL_ID;
+	writel(val, &cpuregs->cpu_conf);
+
+	/* Enable Clocks for all hardware units */
+	writel(0xFFFFFFFF, &mpmu->acgr);
+
+	/* Turn on AIB and AIB-APB Functional clock */
+	writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib);
+
+	/* ensure L2 cache is not mapped as SRAM */
+	val = readl(&cpuregs->cpu_conf);
+	val = val & ~(L2C_RAM_SEL);
+	writel(val, &cpuregs->cpu_conf);
+
+	/* Enable GPIO clock */
+	writel(APBC_APBCLK, &apb1clkres->gpio);
+
+#ifdef CONFIG_I2C_MV
+	/* Enable general I2C clock */
+	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
+	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
+
+	/* Enable power I2C clock */
+	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
+	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
+#endif
+
+	/*
+	 * Enable Functional and APB clock at 14.7456MHz
+	 * for configured UART console
+	 */
+#if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE)
+	writel(UARTCLK14745KHZ, &apb1clkres->uart3);
+#elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE)
+	writel(UARTCLK14745KHZ, &apb1clkres->uart2);
+#else
+	writel(UARTCLK14745KHZ, &apb1clkres->uart1);
+#endif
+	icache_enable();
+
+	return 0;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	u32 id;
+	struct armd1cpu_registers *cpuregs =
+		(struct armd1cpu_registers *) ARMD1_CPU_BASE;
+
+	id = readl(&cpuregs->chip_id);
+	printf("SoC:   Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_I2C_MV
+void i2c_clk_enable(void)
+{
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/dram.c b/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/dram.c
new file mode 100644
index 000000000..c97b5b194
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/dram.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/armada100.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * ARMADA100 DRAM controller supports upto 8 banks
+ * for chip select 0 and 1
+ */
+
+/*
+ * DDR Memory Control Registers
+ * Refer Datasheet Appendix A.17
+ */
+struct armd1ddr_map_registers {
+	u32	cs;	/* Memory Address Map Register -CS */
+	u32	pad[3];
+};
+
+struct armd1ddr_registers {
+	u8	pad[0x100 - 0x000];
+	struct armd1ddr_map_registers mmap[2];
+};
+
+/*
+ * armd1_sdram_base - reads SDRAM Base Address Register
+ */
+u32 armd1_sdram_base(int chip_sel)
+{
+	struct armd1ddr_registers *ddr_regs =
+		(struct armd1ddr_registers *)ARMD1_DRAM_BASE;
+	u32 result = 0;
+	u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
+
+	if (!CS_valid)
+		return 0;
+
+	result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000;
+	return result;
+}
+
+/*
+ * armd1_sdram_size - reads SDRAM size
+ */
+u32 armd1_sdram_size(int chip_sel)
+{
+	struct armd1ddr_registers *ddr_regs =
+		(struct armd1ddr_registers *)ARMD1_DRAM_BASE;
+	u32 result = 0;
+	u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
+
+	if (!CS_valid)
+		return 0;
+
+	result = readl(&ddr_regs->mmap[chip_sel].cs);
+	result = (result >> 16) & 0xF;
+	if (result < 0x7) {
+		printf("Unknown DRAM Size\n");
+		return -1;
+	} else {
+		return ((0x8 << (result - 0x7)) * 1024 * 1024);
+	}
+}
+
+int dram_init(void)
+{
+	int i;
+
+	gd->ram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		gd->bd->bi_dram[i].start = armd1_sdram_base(i);
+		gd->bd->bi_dram[i].size = armd1_sdram_size(i);
+		/*
+		 * It is assumed that all memory banks are consecutive
+		 * and without gaps.
+		 * If the gap is found, ram_size will be reported for
+		 * consecutive memory only
+		 */
+		if (gd->bd->bi_dram[i].start != gd->ram_size)
+			break;
+
+		gd->ram_size += gd->bd->bi_dram[i].size;
+
+	}
+
+	for (; i < CONFIG_NR_DRAM_BANKS; i++) {
+		/* If above loop terminated prematurely, we need to set
+		 * remaining banks' start address & size as 0. Otherwise other
+		 * u-boot functions and Linux kernel gets wrong values which
+		 * could result in crash */
+		gd->bd->bi_dram[i].start = 0;
+		gd->bd->bi_dram[i].size = 0;
+	}
+	return 0;
+}
+
+/*
+ * If this function is not defined here,
+ * board.c alters dram bank zero configuration defined above.
+ */
+int dram_init_banksize(void)
+{
+	dram_init();
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/timer.c b/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/timer.c
new file mode 100644
index 000000000..6d77ad3b6
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/timer.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <time.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/armada100.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
+
+/*
+ * Timer registers
+ * Refer Section A.6 in Datasheet
+ */
+struct armd1tmr_registers {
+	u32 clk_ctrl;	/* Timer clk control reg */
+	u32 match[9];	/* Timer match registers */
+	u32 count[3];	/* Timer count registers */
+	u32 status[3];
+	u32 ie[3];
+	u32 preload[3];	/* Timer preload value */
+	u32 preload_ctrl[3];
+	u32 wdt_match_en;
+	u32 wdt_match_r;
+	u32 wdt_val;
+	u32 wdt_sts;
+	u32 icr[3];
+	u32 wdt_icr;
+	u32 cer;	/* Timer count enable reg */
+	u32 cmr;
+	u32 ilr[3];
+	u32 wcr;
+	u32 wfar;
+	u32 wsar;
+	u32 cvwr;
+};
+
+#define TIMER			0	/* Use TIMER 0 */
+/* Each timer has 3 match registers */
+#define MATCH_CMP(x)		((3 * TIMER) + x)
+#define TIMER_LOAD_VAL 		0xffffffff
+#define	COUNT_RD_REQ		0x1
+
+DECLARE_GLOBAL_DATA_PTR;
+/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
+
+/* For preventing risk of instability in reading counter value,
+ * first set read request to register cvwr and then read same
+ * register after it captures counter value.
+ */
+ulong read_timer(void)
+{
+	struct armd1tmr_registers *armd1timers =
+		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
+	volatile int loop=100;
+
+	writel(COUNT_RD_REQ, &armd1timers->cvwr);
+	while (loop--);
+	return(readl(&armd1timers->cvwr));
+}
+
+static ulong get_timer_masked(void)
+{
+	ulong now = read_timer();
+
+	if (now >= gd->arch.tbl) {
+		/* normal mode */
+		gd->arch.tbu += now - gd->arch.tbl;
+	} else {
+		/* we have an overflow ... */
+		gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
+	}
+	gd->arch.tbl = now;
+
+	return gd->arch.tbu;
+}
+
+ulong get_timer(ulong base)
+{
+	return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) -
+		base);
+}
+
+void __udelay(unsigned long usec)
+{
+	ulong delayticks;
+	ulong endtime;
+
+	delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000));
+	endtime = get_timer_masked() + delayticks;
+
+	while (get_timer_masked() < endtime);
+}
+
+/*
+ * init the Timer
+ */
+int timer_init(void)
+{
+	struct armd1apb1_registers *apb1clkres =
+		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
+	struct armd1tmr_registers *armd1timers =
+		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
+
+	/* Enable Timer clock at 3.25 MHZ */
+	writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers);
+
+	/* load value into timer */
+	writel(0x0, &armd1timers->clk_ctrl);
+	/* Use Timer 0 Match Resiger 0 */
+	writel(TIMER_LOAD_VAL, &armd1timers->match[MATCH_CMP(0)]);
+	/* Preload value is 0 */
+	writel(0x0, &armd1timers->preload[TIMER]);
+	/* Enable match comparator 0 for Timer 0 */
+	writel(0x1, &armd1timers->preload_ctrl[TIMER]);
+
+	/* Enable timer 0 */
+	writel(0x1, &armd1timers->cer);
+	/* init the gd->arch.tbu and gd->arch.tbl value */
+	gd->arch.tbl = read_timer();
+	gd->arch.tbu = 0;
+
+	return 0;
+}
+
+#define MPMU_APRR_WDTR	(1<<4)
+#define TMR_WFAR	0xbaba	/* WDT Register First key */
+#define TMP_WSAR	0xeb10	/* WDT Register Second key */
+
+/*
+ * This function uses internal Watchdog Timer
+ * based reset mechanism.
+ * Steps to write watchdog registers (protected access)
+ * 1. Write key value to TMR_WFAR reg.
+ * 2. Write key value to TMP_WSAR reg.
+ * 3. Perform write operation.
+ */
+void reset_cpu(void)
+{
+	struct armd1mpmu_registers *mpmu =
+		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
+	struct armd1tmr_registers *armd1timers =
+		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
+	u32 val;
+
+	/* negate hardware reset to the WDT after system reset */
+	val = readl(&mpmu->aprr);
+	val = val | MPMU_APRR_WDTR;
+	writel(val, &mpmu->aprr);
+
+	/* reset/enable WDT clock */
+	writel(APBC_APBCLK | APBC_FNCLK | APBC_RST, &mpmu->wdtpcr);
+	readl(&mpmu->wdtpcr);
+	writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr);
+	readl(&mpmu->wdtpcr);
+
+	/* clear previous WDT status */
+	writel(TMR_WFAR, &armd1timers->wfar);
+	writel(TMP_WSAR, &armd1timers->wsar);
+	writel(0, &armd1timers->wdt_sts);
+
+	/* set match counter */
+	writel(TMR_WFAR, &armd1timers->wfar);
+	writel(TMP_WSAR, &armd1timers->wsar);
+	writel(0xf, &armd1timers->wdt_match_r);
+
+	/* enable WDT reset */
+	writel(TMR_WFAR, &armd1timers->wfar);
+	writel(TMP_WSAR, &armd1timers->wsar);
+	writel(0x3, &armd1timers->wdt_match_en);
+
+	while(1);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return (ulong)CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/cache.c b/roms/u-boot/arch/arm/cpu/arm926ejs/cache.c
new file mode 100644
index 000000000..acab9bccc
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/cache.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2011
+ * Ilya Yanok, EmCraft Systems
+ */
+#include <cpu_func.h>
+#include <asm/cache.h>
+#include <linux/types.h>
+#include <common.h>
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void invalidate_dcache_all(void)
+{
+	asm volatile("mcr p15, 0, %0, c7, c6, 0\n" : : "r"(0));
+}
+
+void flush_dcache_all(void)
+{
+	asm volatile(
+		"0:"
+		"mrc p15, 0, r15, c7, c14, 3\n"
+		"bne 0b\n"
+		"mcr p15, 0, %0, c7, c10, 4\n"
+		 : : "r"(0) : "memory"
+	);
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+	if (!check_cache_range(start, stop))
+		return;
+
+	while (start < stop) {
+		asm volatile("mcr p15, 0, %0, c7, c6, 1\n" : : "r"(start));
+		start += CONFIG_SYS_CACHELINE_SIZE;
+	}
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	if (!check_cache_range(start, stop))
+		return;
+
+	while (start < stop) {
+		asm volatile("mcr p15, 0, %0, c7, c14, 1\n" : : "r"(start));
+		start += CONFIG_SYS_CACHELINE_SIZE;
+	}
+
+	asm volatile("mcr p15, 0, %0, c7, c10, 4\n" : : "r"(0));
+}
+#else /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+#endif /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+
+/*
+ * Stub implementations for l2 cache operations
+ */
+
+__weak void l2_cache_disable(void) {}
+
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+__weak void invalidate_l2_cache(void) {}
+#endif
+
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+/* Invalidate entire I-cache and branch predictor array */
+void invalidate_icache_all(void)
+{
+	unsigned long i = 0;
+
+	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i));
+}
+#else
+void invalidate_icache_all(void) {}
+#endif
+
+void enable_caches(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+	icache_enable();
+#endif
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	dcache_enable();
+#endif
+}
+
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/cpu.c b/roms/u-boot/arch/arm/cpu/arm926ejs/cpu.c
new file mode 100644
index 000000000..93d7a02ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/cpu.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/cache.h>
+#include <asm/system.h>
+
+static void cache_flush(void);
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	disable_interrupts();
+
+
+	/* turn off I/D-cache */
+	icache_disable();
+	dcache_disable();
+	l2_cache_disable();
+
+	/* flush I/D-cache */
+	cache_flush();
+
+	return 0;
+}
+
+/* flush I/D-cache */
+static void cache_flush (void)
+{
+#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+	unsigned long i = 0;
+
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/Makefile b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/Makefile
new file mode 100644
index 000000000..ac5ebaf5e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+
+obj-y	+= generic.o timer.o reset.o relocate.o
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/generic.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/generic.c
new file mode 100644
index 000000000..9cd60abcc
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009 DENX Software Engineering
+ * Author: John Rigby <jrigby@gmail.com>
+ *
+ * Based on mx27/generic.c:
+ *  Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
+ *  Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <div64.h>
+#include <init.h>
+#include <net.h>
+#include <netdev.h>
+#include <vsprintf.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-imx/cpu.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+#include <fsl_esdhc_imx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+/*
+ *  get the system pll clock in Hz
+ *
+ *                  mfi + mfn / (mfd +1)
+ *  f = 2 * f_ref * --------------------
+ *                        pd + 1
+ */
+static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
+{
+	unsigned int mfi = (pll >> CCM_PLL_MFI_SHIFT)
+	    & CCM_PLL_MFI_MASK;
+	int mfn = (pll >> CCM_PLL_MFN_SHIFT)
+	    & CCM_PLL_MFN_MASK;
+	unsigned int mfd = (pll >> CCM_PLL_MFD_SHIFT)
+	    & CCM_PLL_MFD_MASK;
+	unsigned int pd = (pll >> CCM_PLL_PD_SHIFT)
+	    & CCM_PLL_PD_MASK;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+	mfn = mfn >= 512 ? mfn - 1024 : mfn;
+	mfd += 1;
+	pd += 1;
+
+	return lldiv(2 * (u64) f_ref * (mfi * mfd + mfn),
+		     mfd * pd);
+}
+
+static ulong imx_get_mpllclk(void)
+{
+	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+	ulong fref = MXC_HCLK;
+
+	return imx_decode_pll(readl(&ccm->mpctl), fref);
+}
+
+static ulong imx_get_upllclk(void)
+{
+	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+	ulong fref = MXC_HCLK;
+
+	return imx_decode_pll(readl(&ccm->upctl), fref);
+}
+
+static ulong imx_get_armclk(void)
+{
+	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+	ulong cctl = readl(&ccm->cctl);
+	ulong fref = imx_get_mpllclk();
+	ulong div;
+
+	if (cctl & CCM_CCTL_ARM_SRC)
+		fref = lldiv((u64) fref * 3, 4);
+
+	div = ((cctl >> CCM_CCTL_ARM_DIV_SHIFT)
+	       & CCM_CCTL_ARM_DIV_MASK) + 1;
+
+	return fref / div;
+}
+
+static ulong imx_get_ahbclk(void)
+{
+	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+	ulong cctl = readl(&ccm->cctl);
+	ulong fref = imx_get_armclk();
+	ulong div;
+
+	div = ((cctl >> CCM_CCTL_AHB_DIV_SHIFT)
+	       & CCM_CCTL_AHB_DIV_MASK) + 1;
+
+	return fref / div;
+}
+
+static ulong imx_get_ipgclk(void)
+{
+	return imx_get_ahbclk() / 2;
+}
+
+static ulong imx_get_perclk(int clk)
+{
+	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+	ulong fref = readl(&ccm->mcr) & (1 << clk) ? imx_get_upllclk() :
+						     imx_get_ahbclk();
+	ulong div;
+
+	div = readl(&ccm->pcdr[CCM_PERCLK_REG(clk)]);
+	div = ((div >> CCM_PERCLK_SHIFT(clk)) & CCM_PERCLK_MASK) + 1;
+
+	return fref / div;
+}
+
+int imx_set_perclk(enum mxc_clock clk, bool from_upll, unsigned int freq)
+{
+	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+	ulong fref = from_upll ? imx_get_upllclk() : imx_get_ahbclk();
+	ulong div = (fref + freq - 1) / freq;
+
+	if (clk > MXC_UART_CLK || !div || --div > CCM_PERCLK_MASK)
+		return -EINVAL;
+
+	clrsetbits_le32(&ccm->pcdr[CCM_PERCLK_REG(clk)],
+			CCM_PERCLK_MASK << CCM_PERCLK_SHIFT(clk),
+			div << CCM_PERCLK_SHIFT(clk));
+	if (from_upll)
+		setbits_le32(&ccm->mcr, 1 << clk);
+	else
+		clrbits_le32(&ccm->mcr, 1 << clk);
+	return 0;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	if (clk >= MXC_CLK_NUM)
+		return -1;
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return imx_get_armclk();
+	case MXC_AHB_CLK:
+		return imx_get_ahbclk();
+	case MXC_IPG_CLK:
+	case MXC_CSPI_CLK:
+	case MXC_FEC_CLK:
+		return imx_get_ipgclk();
+	default:
+		return imx_get_perclk(clk);
+	}
+}
+
+u32 get_cpu_rev(void)
+{
+	u32 srev;
+	u32 system_rev = 0x25000;
+
+	/* read SREV register from IIM module */
+	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+	srev = readl(&iim->iim_srev);
+
+	switch (srev) {
+	case 0x00:
+		system_rev |= CHIP_REV_1_0;
+		break;
+	case 0x01:
+		system_rev |= CHIP_REV_1_1;
+		break;
+	case 0x02:
+		system_rev |= CHIP_REV_1_2;
+		break;
+	default:
+		system_rev |= 0x8000;
+		break;
+	}
+
+	return system_rev;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+static char *get_reset_cause(void)
+{
+	/* read RCSR register from CCM module */
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+
+	u32 cause = readl(&ccm->rcsr) & 0x0f;
+
+	if (cause == 0)
+		return "POR";
+	else if (cause == 1)
+		return "RST";
+	else if ((cause & 2) == 2)
+		return "WDOG";
+	else if ((cause & 4) == 4)
+		return "SW RESET";
+	else if ((cause & 8) == 8)
+		return "JTAG";
+	else
+		return "unknown reset";
+
+}
+
+int print_cpuinfo(void)
+{
+	char buf[32];
+	u32 cpurev = get_cpu_rev();
+
+	printf("CPU:   Freescale i.MX25 rev%d.%d%s at %s MHz\n",
+		(cpurev & 0xF0) >> 4, (cpurev & 0x0F),
+		((cpurev & 0x8000) ? " unknown" : ""),
+		strmhz(buf, imx_get_armclk()));
+	printf("Reset cause: %s\n", get_reset_cause());
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_FEC_MXC)
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(struct bd_info *bis)
+{
+	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+	ulong val;
+
+	val = readl(&ccm->cgr0);
+	val |= (1 << 23);
+	writel(val, &ccm->cgr0);
+	return fecmxc_initialize(bis);
+}
+#endif
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC_IMX
+#if CONFIG_SYS_FSL_ESDHC_ADDR == IMX_MMC_SDHC2_BASE
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#else
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+#endif
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(struct bd_info *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	int i;
+	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+	struct fuse_bank *bank = &iim->bank[0];
+	struct fuse_bank0_regs *fuse =
+			(struct fuse_bank0_regs *)bank->fuse_regs;
+
+	for (i = 0; i < 6; i++)
+		mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
+}
+#endif /* CONFIG_FEC_MXC */
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/relocate.S b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/relocate.S
new file mode 100644
index 000000000..709e35c81
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/relocate.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  relocate - i.MX25-specific vector relocation
+ *
+ *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * The i.MX25 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM, so let's avoid relocating the vectors.
+ */
+	.section	.text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+	bx	lr
+
+ENDPROC(relocate_vectors)
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/reset.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/reset.c
new file mode 100644
index 000000000..7844a99c1
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/reset.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2009
+ * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+/*
+ * Reset the cpu by setting up the watchdog timer and let it time out
+ */
+void reset_cpu(void)
+{
+	struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE;
+	/* Disable watchdog and set Time-Out field to 0 */
+	writew(0, &regs->wcr);
+
+	/* Write Service Sequence */
+	writew(WSR_UNLOCK1, &regs->wsr);
+	writew(WSR_UNLOCK2, &regs->wsr);
+
+	/* Enable watchdog */
+	writew(WCR_WDE, &regs->wcr);
+
+	while (1) ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/timer.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/timer.c
new file mode 100644
index 000000000..4b726d5c7
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx25/timer.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2009
+ * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * (C) Copyright 2009 DENX Software Engineering
+ * Author: John Rigby <jrigby@gmail.com>
+ *	Add support for MX25
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/ptrace.h>
+
+/* nothing really to do with interrupts, just starts up a counter. */
+/* The 32KHz 32-bit timer overruns in 134217 seconds */
+int timer_init(void)
+{
+	int i;
+	struct gpt_regs *gpt = (struct gpt_regs *)IMX_GPT1_BASE;
+	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+
+	/* setup GP Timer 1 */
+	writel(GPT_CTRL_SWR, &gpt->ctrl);
+
+	writel(readl(&ccm->cgr1) | CCM_CGR1_GPT1, &ccm->cgr1);
+
+	for (i = 0; i < 100; i++)
+		writel(0, &gpt->ctrl); /* We have no udelay by now */
+	writel(0, &gpt->pre); /* prescaler = 1 */
+	/* Freerun Mode, 32KHz input */
+	writel(readl(&gpt->ctrl) | GPT_CTRL_CLKSOURCE_32 | GPT_CTRL_FRR,
+			&gpt->ctrl);
+	writel(readl(&gpt->ctrl) | GPT_CTRL_TEN, &gpt->ctrl);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/Makefile b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/Makefile
new file mode 100644
index 000000000..ac5ebaf5e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+
+obj-y	+= generic.o timer.o reset.o relocate.o
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/generic.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/generic.c
new file mode 100644
index 000000000..8b9d3a272
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/generic.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
+ *  Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <net.h>
+#include <netdev.h>
+#include <vsprintf.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/mach-imx/sys_proto.h>
+#ifdef CONFIG_MMC_MXC
+#include <asm/arch/mxcmmc.h>
+#endif
+
+/*
+ *  get the system pll clock in Hz
+ *
+ *                  mfi + mfn / (mfd +1)
+ *  f = 2 * f_ref * --------------------
+ *                        pd + 1
+ */
+static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
+{
+	unsigned int mfi = (pll >> 10) & 0xf;
+	unsigned int mfn = pll & 0x3ff;
+	unsigned int mfd = (pll >> 16) & 0x3ff;
+	unsigned int pd =  (pll >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn),
+			(mfd + 1) * (pd + 1));
+}
+
+static ulong clk_in_32k(void)
+{
+	return 1024 * CONFIG_MX27_CLK32;
+}
+
+static ulong clk_in_26m(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	if (readl(&pll->cscr) & CSCR_OSC26M_DIV1P5) {
+		/* divide by 1.5 */
+		return 26000000 * 2 / 3;
+	} else {
+		return 26000000;
+	}
+}
+
+static ulong imx_get_mpllclk(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	ulong cscr = readl(&pll->cscr);
+	ulong fref;
+
+	if (cscr & CSCR_MCU_SEL)
+		fref = clk_in_26m();
+	else
+		fref = clk_in_32k();
+
+	return imx_decode_pll(readl(&pll->mpctl0), fref);
+}
+
+static ulong imx_get_armclk(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	ulong cscr = readl(&pll->cscr);
+	ulong fref = imx_get_mpllclk();
+	ulong div;
+
+	if (!(cscr & CSCR_ARM_SRC_MPLL))
+		fref = lldiv((fref * 2), 3);
+
+	div = ((cscr >> 12) & 0x3) + 1;
+
+	return lldiv(fref, div);
+}
+
+static ulong imx_get_ahbclk(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	ulong cscr = readl(&pll->cscr);
+	ulong fref = imx_get_mpllclk();
+	ulong div;
+
+	div = ((cscr >> 8) & 0x3) + 1;
+
+	return lldiv(fref * 2, 3 * div);
+}
+
+static __attribute__((unused)) ulong imx_get_spllclk(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	ulong cscr = readl(&pll->cscr);
+	ulong fref;
+
+	if (cscr & CSCR_SP_SEL)
+		fref = clk_in_26m();
+	else
+		fref = clk_in_32k();
+
+	return imx_decode_pll(readl(&pll->spctl0), fref);
+}
+
+static ulong imx_decode_perclk(ulong div)
+{
+	return lldiv((imx_get_mpllclk() * 2), (div * 3));
+}
+
+static ulong imx_get_perclk1(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	return imx_decode_perclk((readl(&pll->pcdr1) & 0x3f) + 1);
+}
+
+static ulong imx_get_perclk2(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	return imx_decode_perclk(((readl(&pll->pcdr1) >> 8) & 0x3f) + 1);
+}
+
+static __attribute__((unused)) ulong imx_get_perclk3(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	return imx_decode_perclk(((readl(&pll->pcdr1) >> 16) & 0x3f) + 1);
+}
+
+static __attribute__((unused)) ulong imx_get_perclk4(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1);
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return imx_get_armclk();
+	case MXC_I2C_CLK:
+		return imx_get_ahbclk()/2;
+	case MXC_UART_CLK:
+		return imx_get_perclk1();
+	case MXC_FEC_CLK:
+		return imx_get_ahbclk();
+	case MXC_ESDHC_CLK:
+		return imx_get_perclk2();
+	}
+	return -1;
+}
+
+
+u32 get_cpu_rev(void)
+{
+	return MXC_CPU_MX27 << 12;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo (void)
+{
+	char buf[32];
+
+	printf("CPU:   Freescale i.MX27 at %s MHz\n\n",
+			strmhz(buf, imx_get_mpllclk()));
+	return 0;
+}
+#endif
+
+int cpu_eth_init(struct bd_info *bis)
+{
+#if defined(CONFIG_FEC_MXC)
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	/* enable FEC clock */
+	writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
+	writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
+	return fecmxc_initialize(bis);
+#else
+	return 0;
+#endif
+}
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(struct bd_info *bis)
+{
+#ifdef CONFIG_MMC_MXC
+	return mxc_mmc_init(bis);
+#else
+	return 0;
+#endif
+}
+
+void imx_gpio_mode(int gpio_mode)
+{
+	struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE;
+	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+	unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT;
+	unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT;
+	unsigned int tmp;
+
+	/* Pullup enable */
+	if (gpio_mode & GPIO_PUEN) {
+		writel(readl(&regs->port[port].puen) | (1 << pin),
+				&regs->port[port].puen);
+	} else {
+		writel(readl(&regs->port[port].puen) & ~(1 << pin),
+				&regs->port[port].puen);
+	}
+
+	/* Data direction */
+	if (gpio_mode & GPIO_OUT) {
+		writel(readl(&regs->port[port].gpio_dir) | 1 << pin,
+				&regs->port[port].gpio_dir);
+	} else {
+		writel(readl(&regs->port[port].gpio_dir) & ~(1 << pin),
+				&regs->port[port].gpio_dir);
+	}
+
+	/* Primary / alternate function */
+	if (gpio_mode & GPIO_AF) {
+		writel(readl(&regs->port[port].gpr) | (1 << pin),
+				&regs->port[port].gpr);
+	} else {
+		writel(readl(&regs->port[port].gpr) & ~(1 << pin),
+				&regs->port[port].gpr);
+	}
+
+	/* use as gpio? */
+	if (!(gpio_mode & (GPIO_PF | GPIO_AF))) {
+		writel(readl(&regs->port[port].gius) | (1 << pin),
+				&regs->port[port].gius);
+	} else {
+		writel(readl(&regs->port[port].gius) & ~(1 << pin),
+				&regs->port[port].gius);
+	}
+
+	/* Output / input configuration */
+	if (pin < 16) {
+		tmp = readl(&regs->port[port].ocr1);
+		tmp &= ~(3 << (pin * 2));
+		tmp |= (ocr << (pin * 2));
+		writel(tmp, &regs->port[port].ocr1);
+
+		writel(readl(&regs->port[port].iconfa1) & ~(3 << (pin * 2)),
+				&regs->port[port].iconfa1);
+		writel(readl(&regs->port[port].iconfa1) | aout << (pin * 2),
+				&regs->port[port].iconfa1);
+		writel(readl(&regs->port[port].iconfb1) & ~(3 << (pin * 2)),
+				&regs->port[port].iconfb1);
+		writel(readl(&regs->port[port].iconfb1) | bout << (pin * 2),
+				&regs->port[port].iconfb1);
+	} else {
+		pin -= 16;
+
+		tmp = readl(&regs->port[port].ocr2);
+		tmp &= ~(3 << (pin * 2));
+		tmp |= (ocr << (pin * 2));
+		writel(tmp, &regs->port[port].ocr2);
+
+		writel(readl(&regs->port[port].iconfa2) & ~(3 << (pin * 2)),
+				&regs->port[port].iconfa2);
+		writel(readl(&regs->port[port].iconfa2) | aout << (pin * 2),
+				&regs->port[port].iconfa2);
+		writel(readl(&regs->port[port].iconfb2) & ~(3 << (pin * 2)),
+				&regs->port[port].iconfb2);
+		writel(readl(&regs->port[port].iconfb2) | bout << (pin * 2),
+				&regs->port[port].iconfb2);
+	}
+}
+
+#ifdef CONFIG_MXC_UART
+void mx27_uart1_init_pins(void)
+{
+	int i;
+	unsigned int mode[] = {
+		PE12_PF_UART1_TXD,
+		PE13_PF_UART1_RXD,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(mode); i++)
+		imx_gpio_mode(mode[i]);
+
+}
+#endif /* CONFIG_MXC_UART */
+
+#ifdef CONFIG_FEC_MXC
+void mx27_fec_init_pins(void)
+{
+	int i;
+	unsigned int mode[] = {
+		PD0_AIN_FEC_TXD0,
+		PD1_AIN_FEC_TXD1,
+		PD2_AIN_FEC_TXD2,
+		PD3_AIN_FEC_TXD3,
+		PD4_AOUT_FEC_RX_ER,
+		PD5_AOUT_FEC_RXD1,
+		PD6_AOUT_FEC_RXD2,
+		PD7_AOUT_FEC_RXD3,
+		PD8_AF_FEC_MDIO,
+		PD9_AIN_FEC_MDC | GPIO_PUEN,
+		PD10_AOUT_FEC_CRS,
+		PD11_AOUT_FEC_TX_CLK,
+		PD12_AOUT_FEC_RXD0,
+		PD13_AOUT_FEC_RX_DV,
+		PD14_AOUT_FEC_CLR,
+		PD15_AOUT_FEC_COL,
+		PD16_AIN_FEC_TX_ER,
+		PF23_AIN_FEC_TX_EN,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(mode); i++)
+		imx_gpio_mode(mode[i]);
+}
+
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	int i;
+	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+	struct fuse_bank *bank = &iim->bank[0];
+	struct fuse_bank0_regs *fuse =
+			(struct fuse_bank0_regs *)bank->fuse_regs;
+
+	for (i = 0; i < 6; i++)
+		mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff;
+}
+#endif /* CONFIG_FEC_MXC */
+
+#ifdef CONFIG_MMC_MXC
+void mx27_sd1_init_pins(void)
+{
+	int i;
+	unsigned int mode[] = {
+		PE18_PF_SD1_D0,
+		PE19_PF_SD1_D1,
+		PE20_PF_SD1_D2,
+		PE21_PF_SD1_D3,
+		PE22_PF_SD1_CMD,
+		PE23_PF_SD1_CLK,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(mode); i++)
+		imx_gpio_mode(mode[i]);
+
+}
+
+void mx27_sd2_init_pins(void)
+{
+	int i;
+	unsigned int mode[] = {
+		PB4_PF_SD2_D0,
+		PB5_PF_SD2_D1,
+		PB6_PF_SD2_D2,
+		PB7_PF_SD2_D3,
+		PB8_PF_SD2_CMD,
+		PB9_PF_SD2_CLK,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(mode); i++)
+		imx_gpio_mode(mode[i]);
+
+}
+#endif /* CONFIG_MMC_MXC */
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/relocate.S b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/relocate.S
new file mode 100644
index 000000000..5dfa272be
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/relocate.S
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  relocate - i.MX27-specific vector relocation
+ *
+ *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+/*
+ * The i.MX27 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM. Therefore, vectors cannot be changed at all.
+ *
+ * However, these ROM-based vectors actually just perform indirect
+ * calls through pointers located in RAM at SoC-specific addresses,
+ * as follows:
+ *
+ * Offset      Exception              Use by ROM code
+ * 0x00000000  reset                  indirect branch to [0x00000014]
+ * 0x00000004  undefined instruction  indirect branch to [0xfffffef0]
+ * 0x00000008  software interrupt     indirect branch to [0xfffffef4]
+ * 0x0000000c  prefetch abort         indirect branch to [0xfffffef8]
+ * 0x00000010  data abort             indirect branch to [0xfffffefc]
+ * 0x00000014  (reserved in ARMv5)    vector to ROM reset: 0xc0000000
+ * 0x00000018  IRQ                    indirect branch to [0xffffff00]
+ * 0x0000001c  FIQ                    indirect branch to [0xffffff04]
+ *
+ * In order to initialize exceptions on i.MX27, we must copy U-Boot's
+ * indirect (not exception!) vector table into 0xfffffef0..0xffffff04
+ * taking care not to copy vectors number 5 (reserved exception).
+ */
+
+	.section	.text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+	ldr	r0, [r9, #GD_RELOCADDR]	/* r0 = gd->relocaddr */
+	ldr	r1, =32			/* size of vector table */
+	add	r0, r0, r1		/* skip to indirect table */
+	ldr	r1, =0xFFFFFEF0		/* i.MX27 indirect table */
+	ldmia	r0!, {r2-r8}		/* load indirect vectors 1..7 */
+	stmia	r1!, {r2-r5, r7,r8}	/* write all but vector 5 */
+
+	bx	lr
+
+ENDPROC(relocate_vectors)
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/reset.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/reset.c
new file mode 100644
index 000000000..496fb3081
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/reset.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2009
+ * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+/*
+ * Reset the cpu by setting up the watchdog timer and let it time out
+ */
+void reset_cpu(void)
+{
+	struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE;
+	/* Disable watchdog and set Time-Out field to 0 */
+	writew(0x0000, &regs->wcr);
+
+	/* Write Service Sequence */
+	writew(0x5555, &regs->wsr);
+	writew(0xAAAA, &regs->wsr);
+
+	/* Enable watchdog */
+	writew(WCR_WDE, &regs->wcr);
+
+	while (1);
+	/*NOTREACHED*/
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/timer.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/timer.c
new file mode 100644
index 000000000..4fd6a8059
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mx27/timer.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2009
+ * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/ptrace.h>
+#include <linux/delay.h>
+
+/* General purpose timers bitfields */
+#define GPTCR_SWR		(1 << 15)	/* Software reset	*/
+#define GPTCR_FRR		(1 << 8)	/* Freerun / restart	*/
+#define GPTCR_CLKSOURCE_32	(4 << 1)	/* Clock source		*/
+#define GPTCR_TEN		1		/* Timer enable		*/
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp	(gd->arch.tbl)
+#define lastinc		(gd->arch.lastinc)
+
+/*
+ * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
+ * "tick" is internal timer period
+ */
+#ifdef CONFIG_MX27_TIMER_HIGH_PRECISION
+/* ~0.4% error - measured with stop-watch on 100s boot-delay */
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, CONFIG_MX27_CLK32);
+	return tick;
+}
+
+static inline unsigned long long time_to_tick(unsigned long long time)
+{
+	time *= CONFIG_MX27_CLK32;
+	do_div(time, CONFIG_SYS_HZ);
+	return time;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long us)
+{
+	us = us * CONFIG_MX27_CLK32 + 999999;
+	do_div(us, 1000000);
+	return us;
+}
+#else
+/* ~2% error */
+#define TICK_PER_TIME	((CONFIG_MX27_CLK32 + CONFIG_SYS_HZ / 2) / \
+		CONFIG_SYS_HZ)
+#define US_PER_TICK	(1000000 / CONFIG_MX27_CLK32)
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	do_div(tick, TICK_PER_TIME);
+	return tick;
+}
+
+static inline unsigned long long time_to_tick(unsigned long long time)
+{
+	return time * TICK_PER_TIME;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long us)
+{
+	us += US_PER_TICK - 1;
+	do_div(us, US_PER_TICK);
+	return us;
+}
+#endif
+
+/* nothing really to do with interrupts, just starts up a counter. */
+/* The 32768Hz 32-bit timer overruns in 131072 seconds */
+int timer_init(void)
+{
+	int i;
+	struct gpt_regs *regs = (struct gpt_regs *)IMX_TIM1_BASE;
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	/* setup GP Timer 1 */
+	writel(GPTCR_SWR, &regs->gpt_tctl);
+
+	writel(readl(&pll->pccr0) | PCCR0_GPT1_EN, &pll->pccr0);
+	writel(readl(&pll->pccr1) | PCCR1_PERCLK1_EN, &pll->pccr1);
+
+	for (i = 0; i < 100; i++)
+		writel(0, &regs->gpt_tctl); /* We have no udelay by now */
+	writel(0, &regs->gpt_tprer); /* 32Khz */
+	/* Freerun Mode, PERCLK1 input */
+	writel(readl(&regs->gpt_tctl) | GPTCR_CLKSOURCE_32 | GPTCR_FRR,
+			&regs->gpt_tctl);
+	writel(readl(&regs->gpt_tctl) | GPTCR_TEN, &regs->gpt_tctl);
+
+	return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+	struct gpt_regs *regs = (struct gpt_regs *)IMX_TIM1_BASE;
+	ulong now = readl(&regs->gpt_tcn); /* current tick value */
+
+	if (now >= lastinc) {
+		/*
+		 * normal mode (non roll)
+		 * move stamp forward with absolut diff ticks
+		 */
+		timestamp += (now - lastinc);
+	} else {
+		/* we have rollover of incrementer */
+		timestamp += (0xFFFFFFFF - lastinc) + now;
+	}
+	lastinc = now;
+	return timestamp;
+}
+
+static ulong get_timer_masked(void)
+{
+	/*
+	 * get_ticks() returns a long long (64 bit), it wraps in
+	 * 2^64 / CONFIG_MX27_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
+	 * 5 * 10^6 days - long enough.
+	 */
+	return tick_to_time(get_ticks());
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+/* delay x useconds AND preserve advance timstamp value */
+void __udelay(unsigned long usec)
+{
+	unsigned long long tmp;
+	ulong tmo;
+
+	tmo = us_to_tick(usec);
+	tmp = get_ticks() + tmo;	/* get current timestamp */
+
+	while (get_ticks() < tmp)	/* loop till event */
+		 /*NOP*/;
+}
+
+ulong get_tbclk(void)
+{
+	return CONFIG_MX27_CLK32;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/Makefile b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/Makefile
new file mode 100644
index 000000000..f60e61e43
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/Makefile
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-$(CONFIG_SPL_BUILD) := start.o
+
+obj-y	= clock.o mxs.o iomux.o timer.o
+
+ifdef	CONFIG_SPL_BUILD
+obj-y	+= spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o
+endif
+
+# Specify the target for use in elftosb call
+MKIMAGE_TARGET-$(CONFIG_MX23) = mxsimage$(CONFIG_SPL_FRAMEWORK:%=-spl).mx23.cfg
+MKIMAGE_TARGET-$(CONFIG_MX28) = mxsimage$(CONFIG_SPL_FRAMEWORK:%=-spl).mx28.cfg
+
+# Generate HAB-capable IVT
+#
+# Note on computing the post-IVT size field value for the U-Boot binary.
+# The value is the result of adding the following:
+#  -> The size of U-Boot binary aligned to 64B (u-boot.bin)
+#  -> The size of IVT block aligned to 64B (u-boot.ivt)
+#  -> The size of U-Boot signature (u-boot.sig), 3904 B
+#  -> The 64B hole in front of U-Boot binary for 'struct mxs_spl_data' passing
+#
+quiet_cmd_mkivt_mxs = MXSIVT  $@
+cmd_mkivt_mxs =								\
+	sz=`expr \`stat -c "%s" $^\` + 64 + 3904 + 128` ;		\
+	echo -n "0x402000d1 $2 0 0 0 $3 $4 0 $$sz 0 0 0 0 0 0 0" |	\
+	tr -s " " | xargs -d " " -i printf "%08x\n" "{}" | rev |	\
+	sed "s/\(.\)\(.\)/\\\\\\\\x\2\1\n/g" | xargs -i printf "{}" >$@
+
+# Align binary to 64B
+quiet_cmd_mkalign_mxs = MXSALGN $@
+cmd_mkalign_mxs =							\
+	dd if=$^ of=$@ ibs=64 conv=sync 2>/dev/null &&			\
+	mv $@ $^
+
+# Assemble the CSF file
+quiet_cmd_mkcsfreq_mxs = MXSCSFR $@
+cmd_mkcsfreq_mxs =							\
+	ivt=$(word 1,$^) ;						\
+	bin=$(word 2,$^) ;						\
+	csf=$(word 3,$^) ;						\
+	sed "s@VENDOR@$(VENDOR)@g;s@BOARD@$(BOARD)@g" "$$csf" |		\
+		sed '/^\#\#Blocks/ d' > $@ ;				\
+	echo "  Blocks = $2 0x0 `stat -c '%s' $$bin` \"$$bin\" , \\" >> $@ ; \
+	echo "           $3 0x0 0x40 \"$$ivt\"" >> $@
+
+# Sign files
+quiet_cmd_mkcst_mxs = MXSCST  $@
+cmd_mkcst_mxs = cst -o $@ < $^						\
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+spl/u-boot-spl.ivt: spl/u-boot-spl.bin
+	$(call if_changed,mkalign_mxs)
+	$(call if_changed,mkivt_mxs,$(CONFIG_SPL_TEXT_BASE),\
+		0x00008000,0x00008040)
+
+u-boot.ivt: u-boot.bin
+	$(call if_changed,mkalign_mxs)
+	$(call if_changed,mkivt_mxs,$(CONFIG_SYS_TEXT_BASE),\
+		0x40001000,0x40001040)
+
+spl/u-boot-spl.csf: spl/u-boot-spl.ivt spl/u-boot-spl.bin board/$(VENDOR)/$(BOARD)/sign/u-boot-spl.csf
+	$(call if_changed,mkcsfreq_mxs,$(CONFIG_SPL_TEXT_BASE),0x8000)
+
+u-boot.csf: u-boot.ivt u-boot.bin board/$(VENDOR)/$(BOARD)/sign/u-boot.csf
+	$(call if_changed,mkcsfreq_mxs,$(CONFIG_SYS_TEXT_BASE),0x40001000)
+
+%.sig: %.csf
+	$(call if_changed,mkcst_mxs)
+
+MKIMAGEFLAGS_u-boot.sb = -n $< -T mxsimage
+u-boot.sb: $(src)/$(MKIMAGE_TARGET-y) u-boot.bin spl/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+
+MKIMAGEFLAGS_u-boot-signed.sb = -n $< -T mxsimage
+u-boot-signed.sb: $(src)/mxsimage-signed.cfg u-boot.ivt u-boot.sig spl/u-boot-spl.ivt spl/u-boot-spl.sig FORCE
+	$(call if_changed,mkimage)
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/clock.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/clock.c
new file mode 100644
index 000000000..4e1cf3a1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale i.MX23/i.MX28 clock setup code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+
+/*
+ * The PLL frequency is 480MHz and XTAL frequency is 24MHz
+ *   iMX23: datasheet section 4.2
+ *   iMX28: datasheet section 10.2
+ */
+#define	PLL_FREQ_KHZ	480000
+#define	PLL_FREQ_COEF	18
+#define	XTAL_FREQ_KHZ	24000
+
+#define	PLL_FREQ_MHZ	(PLL_FREQ_KHZ / 1000)
+#define	XTAL_FREQ_MHZ	(XTAL_FREQ_KHZ / 1000)
+
+#if defined(CONFIG_MX23)
+#define MXC_SSPCLK_MAX MXC_SSPCLK0
+#elif defined(CONFIG_MX28)
+#define MXC_SSPCLK_MAX MXC_SSPCLK3
+#endif
+
+static uint32_t mxs_get_pclk(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	uint32_t clkctrl, clkseq, div;
+	uint8_t clkfrac, frac;
+
+	clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu);
+
+	/* No support of fractional divider calculation */
+	if (clkctrl &
+		(CLKCTRL_CPU_DIV_XTAL_FRAC_EN | CLKCTRL_CPU_DIV_CPU_FRAC_EN)) {
+		return 0;
+	}
+
+	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+
+	/* XTAL Path */
+	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) {
+		div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >>
+			CLKCTRL_CPU_DIV_XTAL_OFFSET;
+		return XTAL_FREQ_MHZ / div;
+	}
+
+	/* REF Path */
+	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]);
+	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
+	div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK;
+	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+static uint32_t mxs_get_hclk(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	uint32_t div;
+	uint32_t clkctrl;
+
+	clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus);
+
+	/* No support of fractional divider calculation */
+	if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN)
+		return 0;
+
+	div = clkctrl & CLKCTRL_HBUS_DIV_MASK;
+	return mxs_get_pclk() / div;
+}
+
+static uint32_t mxs_get_emiclk(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	uint32_t clkctrl, clkseq, div;
+	uint8_t clkfrac, frac;
+
+	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+	clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi);
+
+	/* XTAL Path */
+	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) {
+		div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >>
+			CLKCTRL_EMI_DIV_XTAL_OFFSET;
+		return XTAL_FREQ_MHZ / div;
+	}
+
+	/* REF Path */
+	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
+	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
+	div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK;
+	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+static uint32_t mxs_get_gpmiclk(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+#if defined(CONFIG_MX23)
+	uint8_t *reg =
+		&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU];
+#elif defined(CONFIG_MX28)
+	uint8_t *reg =
+		&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI];
+#endif
+	uint32_t clkctrl, clkseq, div;
+	uint8_t clkfrac, frac;
+
+	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+	clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi);
+
+	/* XTAL Path */
+	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) {
+		div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
+		return XTAL_FREQ_MHZ / div;
+	}
+
+	/* REF Path */
+	clkfrac = readb(reg);
+	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
+	div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
+	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+/*
+ * Set IO clock frequency, in kHz
+ */
+void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	uint32_t div;
+	int io_reg;
+
+	if (freq == 0)
+		return;
+
+	if ((io < MXC_IOCLK0) || (io > MXC_IOCLK1))
+		return;
+
+	div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq;
+
+	if (div < 18)
+		div = 18;
+
+	if (div > 35)
+		div = 35;
+
+	io_reg = CLKCTRL_FRAC0_IO0 - io;	/* Register order is reversed */
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_set[io_reg]);
+	writeb(CLKCTRL_FRAC_CLKGATE | (div & CLKCTRL_FRAC_FRAC_MASK),
+		&clkctrl_regs->hw_clkctrl_frac0[io_reg]);
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_clr[io_reg]);
+}
+
+/*
+ * Get IO clock, returns IO clock in kHz
+ */
+static uint32_t mxs_get_ioclk(enum mxs_ioclock io)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	uint8_t ret;
+	int io_reg;
+
+	if ((io < MXC_IOCLK0) || (io > MXC_IOCLK1))
+		return 0;
+
+	io_reg = CLKCTRL_FRAC0_IO0 - io;	/* Register order is reversed */
+
+	ret = readb(&clkctrl_regs->hw_clkctrl_frac0[io_reg]) &
+		CLKCTRL_FRAC_FRAC_MASK;
+
+	return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret;
+}
+
+/*
+ * Configure SSP clock frequency, in kHz
+ */
+void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	uint32_t clk, clkreg;
+
+	if (ssp > MXC_SSPCLK_MAX)
+		return;
+
+	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
+			(ssp * sizeof(struct mxs_register_32));
+
+	clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE);
+	while (readl(clkreg) & CLKCTRL_SSP_CLKGATE)
+		;
+
+	if (xtal)
+		clk = XTAL_FREQ_KHZ;
+	else
+		clk = mxs_get_ioclk(ssp >> 1);
+
+	if (freq > clk)
+		return;
+
+	/* Calculate the divider and cap it if necessary */
+	clk /= freq;
+	if (clk > CLKCTRL_SSP_DIV_MASK)
+		clk = CLKCTRL_SSP_DIV_MASK;
+
+	clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk);
+	while (readl(clkreg) & CLKCTRL_SSP_BUSY)
+		;
+
+	if (xtal)
+		writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
+			&clkctrl_regs->hw_clkctrl_clkseq_set);
+	else
+		writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
+			&clkctrl_regs->hw_clkctrl_clkseq_clr);
+}
+
+/*
+ * Return SSP frequency, in kHz
+ */
+static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	uint32_t clkreg;
+	uint32_t clk, tmp;
+
+	if (ssp > MXC_SSPCLK_MAX)
+		return 0;
+
+	tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+	if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp))
+		return XTAL_FREQ_KHZ;
+
+	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
+			(ssp * sizeof(struct mxs_register_32));
+
+	tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK;
+
+	if (tmp == 0)
+		return 0;
+
+	clk = mxs_get_ioclk(ssp >> 1);
+
+	return clk / tmp;
+}
+
+/*
+ * Set SSP/MMC bus frequency, in kHz)
+ */
+void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq)
+{
+	struct mxs_ssp_regs *ssp_regs;
+	const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus);
+	const uint32_t sspclk = mxs_get_sspclk(clk);
+	uint32_t reg;
+	uint32_t divide, rate, tgtclk;
+
+	ssp_regs = mxs_ssp_regs_by_bus(bus);
+
+	/*
+	 * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
+	 * CLOCK_DIVIDE has to be an even value from 2 to 254, and
+	 * CLOCK_RATE could be any integer from 0 to 255.
+	 */
+	for (divide = 2; divide < 254; divide += 2) {
+		rate = sspclk / freq / divide;
+		if (rate <= 256)
+			break;
+	}
+
+	tgtclk = sspclk / divide / rate;
+	while (tgtclk > freq) {
+		rate++;
+		tgtclk = sspclk / divide / rate;
+	}
+	if (rate > 256)
+		rate = 256;
+
+	/* Always set timeout the maximum */
+	reg = SSP_TIMING_TIMEOUT_MASK |
+		(divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) |
+		((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET);
+	writel(reg, &ssp_regs->hw_ssp_timing);
+
+	debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n",
+		bus, tgtclk, freq);
+}
+
+void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	uint32_t fp, x, k_rest, k_best, x_best, tk;
+	int32_t k_best_l = 999, k_best_t = 0, x_best_l = 0xff, x_best_t = 0xff;
+
+	if (freq == 0)
+		return;
+
+#if defined(CONFIG_MX23)
+	writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr);
+#elif defined(CONFIG_MX28)
+	writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr);
+#endif
+
+	/*
+	 *             /               18 \     1       1
+	 * freq kHz = | 480000000 Hz * --  | * --- * ------
+	 *             \                x /     k     1000
+	 *
+	 *      480000000 Hz   18
+	 *      ------------ * --
+	 *        freq kHz      x
+	 * k = -------------------
+	 *             1000
+	 */
+
+	fp = ((PLL_FREQ_KHZ * 1000) / freq) * 18;
+
+	for (x = 18; x <= 35; x++) {
+		tk = fp / x;
+		if ((tk / 1000 == 0) || (tk / 1000 > 255))
+			continue;
+
+		k_rest = tk % 1000;
+
+		if (k_rest < (k_best_l % 1000)) {
+			k_best_l = tk;
+			x_best_l = x;
+		}
+
+		if (k_rest > (k_best_t % 1000)) {
+			k_best_t = tk;
+			x_best_t = x;
+		}
+	}
+
+	if (1000 - (k_best_t % 1000) > (k_best_l % 1000)) {
+		k_best = k_best_l;
+		x_best = x_best_l;
+	} else {
+		k_best = k_best_t;
+		x_best = x_best_t;
+	}
+
+	k_best /= 1000;
+
+#if defined(CONFIG_MX23)
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]);
+	writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
+		&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]);
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]);
+
+	writel(CLKCTRL_PIX_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_pix_set);
+	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix,
+			CLKCTRL_PIX_DIV_MASK | CLKCTRL_PIX_CLKGATE,
+			k_best << CLKCTRL_PIX_DIV_OFFSET);
+
+	while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY)
+		;
+#elif defined(CONFIG_MX28)
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]);
+	writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
+		&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_PIX]);
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac1_clr[CLKCTRL_FRAC1_PIX]);
+
+	writel(CLKCTRL_DIS_LCDIF_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_lcdif_set);
+	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_lcdif,
+			CLKCTRL_DIS_LCDIF_DIV_MASK | CLKCTRL_DIS_LCDIF_CLKGATE,
+			k_best << CLKCTRL_DIS_LCDIF_DIV_OFFSET);
+
+	while (readl(&clkctrl_regs->hw_clkctrl_lcdif) & CLKCTRL_DIS_LCDIF_BUSY)
+		;
+#endif
+}
+
+uint32_t mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return mxs_get_pclk() * 1000000;
+	case MXC_GPMI_CLK:
+		return mxs_get_gpmiclk() * 1000000;
+	case MXC_AHB_CLK:
+	case MXC_IPG_CLK:
+		return mxs_get_hclk() * 1000000;
+	case MXC_EMI_CLK:
+		return mxs_get_emiclk();
+	case MXC_IO0_CLK:
+		return mxs_get_ioclk(MXC_IOCLK0);
+	case MXC_IO1_CLK:
+		return mxs_get_ioclk(MXC_IOCLK1);
+	case MXC_XTAL_CLK:
+		return XTAL_FREQ_KHZ * 1000;
+	case MXC_SSP0_CLK:
+		return mxs_get_sspclk(MXC_SSPCLK0);
+#ifdef CONFIG_MX28
+	case MXC_SSP1_CLK:
+		return mxs_get_sspclk(MXC_SSPCLK1);
+	case MXC_SSP2_CLK:
+		return mxs_get_sspclk(MXC_SSPCLK2);
+	case MXC_SSP3_CLK:
+		return mxs_get_sspclk(MXC_SSPCLK3);
+#endif
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/iomux.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/iomux.c
new file mode 100644
index 000000000..381264b8a
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/iomux.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                       <armlinux@phytec.de>
+ */
+
+#include <common.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+
+#if	defined(CONFIG_MX23)
+#define	DRIVE_OFFSET	0x200
+#define	PULL_OFFSET	0x400
+#elif	defined(CONFIG_MX28)
+#define	DRIVE_OFFSET	0x300
+#define	PULL_OFFSET	0x600
+#else
+#error "Please select CONFIG_MX23 or CONFIG_MX28"
+#endif
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad)
+{
+	u32 reg, ofs, bp, bm;
+	void *iomux_base = (void *)MXS_PINCTRL_BASE;
+	struct mxs_register_32 *mxs_reg;
+
+	/* muxsel */
+	ofs = 0x100;
+	ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
+	bp = PAD_PIN(pad) % 16 * 2;
+	bm = 0x3 << bp;
+	reg = readl(iomux_base + ofs);
+	reg &= ~bm;
+	reg |= PAD_MUXSEL(pad) << bp;
+	writel(reg, iomux_base + ofs);
+
+	/* drive */
+	ofs = DRIVE_OFFSET;
+	ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
+	/* mA */
+	if (PAD_MA_VALID(pad)) {
+		bp = PAD_PIN(pad) % 8 * 4;
+		bm = 0x3 << bp;
+		reg = readl(iomux_base + ofs);
+		reg &= ~bm;
+		reg |= PAD_MA(pad) << bp;
+		writel(reg, iomux_base + ofs);
+	}
+	/* vol */
+	if (PAD_VOL_VALID(pad)) {
+		bp = PAD_PIN(pad) % 8 * 4 + 2;
+		mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs);
+		if (PAD_VOL(pad))
+			writel(1 << bp, &mxs_reg->reg_set);
+		else
+			writel(1 << bp, &mxs_reg->reg_clr);
+	}
+
+	/* pull */
+	if (PAD_PULL_VALID(pad)) {
+		ofs = PULL_OFFSET;
+		ofs += PAD_BANK(pad) * 0x10;
+		bp = PAD_PIN(pad);
+		mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs);
+		if (PAD_PULL(pad))
+			writel(1 << bp, &mxs_reg->reg_set);
+		else
+			writel(1 << bp, &mxs_reg->reg_clr);
+	}
+
+	return 0;
+}
+
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
+{
+	const iomux_cfg_t *p = pad_list;
+	int i;
+	int ret;
+
+	for (i = 0; i < count; i++) {
+		ret = mxs_iomux_setup_pad(*p);
+		if (ret)
+			return ret;
+		p++;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxs.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxs.c
new file mode 100644
index 000000000..4d21e3df7
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxs.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale i.MX23/i.MX28 common code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <init.h>
+#include <net.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/mach-imx/dma.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/sections.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Lowlevel init isn't used on i.MX28, so just have a dummy here */
+__weak void lowlevel_init(void) {}
+
+void reset_cpu(void) __attribute__((noreturn));
+
+void reset_cpu(void)
+{
+	struct mxs_rtc_regs *rtc_regs =
+		(struct mxs_rtc_regs *)MXS_RTC_BASE;
+	struct mxs_lcdif_regs *lcdif_regs =
+		(struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
+
+	/*
+	 * Shut down the LCD controller as it interferes with BootROM boot mode
+	 * pads sampling.
+	 */
+	writel(LCDIF_CTRL_RUN, &lcdif_regs->hw_lcdif_ctrl_clr);
+
+	/* Wait 1 uS before doing the actual watchdog reset */
+	writel(1, &rtc_regs->hw_rtc_watchdog);
+	writel(RTC_CTRL_WATCHDOGEN, &rtc_regs->hw_rtc_ctrl_set);
+
+	/* Endless loop, reset will exit from here */
+	for (;;)
+		;
+}
+
+/*
+ * This function will craft a jumptable at 0x0 which will redirect interrupt
+ * vectoring to proper location of U-Boot in RAM.
+ *
+ * The structure of the jumptable will be as follows:
+ *  ldr pc, [pc, #0x18] ..... for each vector, thus repeated 8 times
+ *  <destination address> ... for each previous ldr, thus also repeated 8 times
+ *
+ * The "ldr pc, [pc, #0x18]" instruction above loads address from memory at
+ * offset 0x18 from current value of PC register. Note that PC is already
+ * incremented by 4 when computing the offset, so the effective offset is
+ * actually 0x20, this the associated <destination address>. Loading the PC
+ * register with an address performs a jump to that address.
+ */
+void mx28_fixup_vt(uint32_t start_addr)
+{
+	/* ldr pc, [pc, #0x18] */
+	const uint32_t ldr_pc = 0xe59ff018;
+	/* Jumptable location is 0x0 */
+	uint32_t *vt = (uint32_t *)0x0;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		/* cppcheck-suppress nullPointer */
+		vt[i] = ldr_pc;
+		/* cppcheck-suppress nullPointer */
+		vt[i + 8] = start_addr + (4 * i);
+	}
+}
+
+#ifdef	CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+	mx28_fixup_vt(gd->relocaddr);
+	return 0;
+}
+#endif
+
+int arch_cpu_init(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	mx28_fixup_vt((uint32_t)&_start);
+
+	/*
+	 * Enable NAND clock
+	 */
+	/* Set bypass bit */
+	writel(CLKCTRL_CLKSEQ_BYPASS_GPMI,
+		&clkctrl_regs->hw_clkctrl_clkseq_set);
+
+	/* Set GPMI clock to ref_xtal / 1 */
+	clrbits_le32(&clkctrl_regs->hw_clkctrl_gpmi, CLKCTRL_GPMI_CLKGATE);
+	while (readl(&clkctrl_regs->hw_clkctrl_gpmi) & CLKCTRL_GPMI_CLKGATE)
+		;
+	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi,
+		CLKCTRL_GPMI_DIV_MASK, 1);
+
+	udelay(1000);
+
+	/*
+	 * Configure GPIO unit
+	 */
+	mxs_gpio_init();
+
+#ifdef	CONFIG_APBH_DMA
+	/* Start APBH DMA */
+	mxs_dma_init();
+#endif
+
+	return 0;
+}
+
+u32 get_cpu_rev(void)
+{
+	struct mxs_digctl_regs *digctl_regs =
+		(struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
+	uint8_t rev = readl(&digctl_regs->hw_digctl_chipid) & 0x000000FF;
+
+	switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) {
+	case HW_DIGCTL_CHIPID_MX23:
+		switch (rev) {
+		case 0x0:
+		case 0x1:
+		case 0x2:
+		case 0x3:
+		case 0x4:
+			return (MXC_CPU_MX23 << 12) | (rev + 0x10);
+		default:
+			return 0;
+		}
+	case HW_DIGCTL_CHIPID_MX28:
+		switch (rev) {
+		case 0x1:
+			return (MXC_CPU_MX28 << 12) | 0x12;
+		default:
+			return 0;
+		}
+	default:
+		return 0;
+	}
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+const char *get_imx_type(u32 imxtype)
+{
+	switch (imxtype) {
+	case MXC_CPU_MX23:
+		return "23";
+	case MXC_CPU_MX28:
+		return "28";
+	default:
+		return "??";
+	}
+}
+
+int print_cpuinfo(void)
+{
+	u32 cpurev;
+	struct mxs_spl_data *data = MXS_SPL_DATA;
+
+	cpurev = get_cpu_rev();
+	printf("CPU:   Freescale i.MX%s rev%d.%d at %d MHz\n",
+		get_imx_type((cpurev & 0xFF000) >> 12),
+		(cpurev & 0x000F0) >> 4,
+		(cpurev & 0x0000F) >> 0,
+		mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("BOOT:  %s\n", mxs_boot_modes[data->boot_mode_idx].mode);
+	return 0;
+}
+#endif
+
+int do_mx28_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	printf("CPU:   %3d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("BUS:   %3d MHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000000);
+	printf("EMI:   %3d MHz\n", mxc_get_clock(MXC_EMI_CLK));
+	printf("GPMI:  %3d MHz\n", mxc_get_clock(MXC_GPMI_CLK) / 1000000);
+	return 0;
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ */
+#if defined(CONFIG_MX28) && defined(CONFIG_CMD_NET)
+int cpu_eth_init(struct bd_info *bis)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	/* Turn on ENET clocks */
+	clrbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+		CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE);
+
+	/* Set up ENET PLL for 50 MHz */
+	/* Power on ENET PLL */
+	writel(CLKCTRL_PLL2CTRL0_POWER,
+		&clkctrl_regs->hw_clkctrl_pll2ctrl0_set);
+
+	udelay(10);
+
+	/* Gate on ENET PLL */
+	writel(CLKCTRL_PLL2CTRL0_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_pll2ctrl0_clr);
+
+	/* Enable pad output */
+	setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN);
+
+	return 0;
+}
+#endif
+
+__weak void mx28_adjust_mac(int dev_id, unsigned char *mac)
+{
+	mac[0] = 0x00;
+	mac[1] = 0x04; /* Use FSL vendor MAC address by default */
+
+	if (dev_id == 1) /* Let MAC1 be MAC0 + 1 by default */
+		mac[5] += 1;
+}
+
+#ifdef	CONFIG_MX28_FEC_MAC_IN_OCOTP
+
+#define	MXS_OCOTP_MAX_TIMEOUT	1000000
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	struct mxs_ocotp_regs *ocotp_regs =
+		(struct mxs_ocotp_regs *)MXS_OCOTP_BASE;
+	uint32_t data;
+
+	memset(mac, 0, 6);
+
+	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+	if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+				MXS_OCOTP_MAX_TIMEOUT)) {
+		printf("MXS FEC: Can't get MAC from OCOTP\n");
+		return;
+	}
+
+	data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+	mac[2] = (data >> 24) & 0xff;
+	mac[3] = (data >> 16) & 0xff;
+	mac[4] = (data >> 8) & 0xff;
+	mac[5] = data & 0xff;
+	mx28_adjust_mac(dev_id, mac);
+}
+#else
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	memset(mac, 0, 6);
+}
+#endif
+
+int mxs_dram_init(void)
+{
+	struct mxs_spl_data *data = MXS_SPL_DATA;
+
+	if (data->mem_dram_size == 0) {
+		printf("MXS:\n"
+			"Error, the RAM size passed up from SPL is 0!\n");
+		hang();
+	}
+
+	gd->ram_size = data->mem_dram_size;
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
+	"display clocks",
+	""
+);
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxs_init.h b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxs_init.h
new file mode 100644
index 000000000..062deb779
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxs_init.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 SPL functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef	__M28_INIT_H__
+#define	__M28_INIT_H__
+
+void early_delay(int delay);
+
+void mxs_power_init(void);
+
+#ifdef	CONFIG_SPL_MXS_PSWITCH_WAIT
+void mxs_power_wait_pswitch(void);
+#else
+static inline void mxs_power_wait_pswitch(void) { }
+#endif
+
+void mxs_mem_init(void);
+uint32_t mxs_mem_get_size(void);
+
+void mxs_lradc_init(void);
+void mxs_lradc_enable_batt_measurement(void);
+
+#endif	/* __M28_INIT_H__ */
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
new file mode 100644
index 000000000..83953daf2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
@@ -0,0 +1,11 @@
+DISPLAYPROGRESS
+SECTION 0x0 BOOTABLE
+ TAG LAST
+ LOAD     0x1000     spl/u-boot-spl.bin
+ LOAD     0x8000     spl/u-boot-spl.ivt
+ LOAD     0x8040     spl/u-boot-spl.sig
+ CALL HAB 0x8000     0x0
+ LOAD     0x40002000 u-boot.bin
+ LOAD     0x40001000 u-boot.ivt
+ LOAD     0x40001040 u-boot.sig
+ CALL HAB 0x40001000 0x0
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg
new file mode 100644
index 000000000..ab2183ed3
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg
@@ -0,0 +1,5 @@
+DISPLAYPROGRESS
+SECTION 0x0 BOOTABLE
+ TAG LAST
+ LOAD     0x1000     spl/u-boot-spl.bin
+ CALL     0x1000     0x0
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg
new file mode 100644
index 000000000..0d95064ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg
@@ -0,0 +1,6 @@
+DISPLAYPROGRESS
+SECTION 0x0 BOOTABLE
+ TAG LAST
+ LOAD     0x1000     spl/u-boot-spl.bin
+ LOAD IVT 0x8000     0x1000
+ CALL HAB 0x8000     0x0
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
new file mode 100644
index 000000000..e7028092a
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
@@ -0,0 +1,7 @@
+DISPLAYPROGRESS
+SECTION 0x0 BOOTABLE
+ TAG LAST
+ LOAD     0x1000     spl/u-boot-spl.bin
+ CALL     0x1000     0x0
+ LOAD     0x40002000 u-boot.bin
+ CALL     0x40002000 0x0
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
new file mode 100644
index 000000000..3f7bf5992
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
@@ -0,0 +1,9 @@
+DISPLAYPROGRESS
+SECTION 0x0 BOOTABLE
+ TAG LAST
+ LOAD     0x1000     spl/u-boot-spl.bin
+ LOAD IVT 0x8000     0x1000
+ CALL HAB 0x8000     0x0
+ LOAD     0x40002000 u-boot.bin
+ LOAD IVT 0x8000     0x40002000
+ CALL HAB 0x8000     0x0
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
new file mode 100644
index 000000000..0a8985b90
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale i.MX28 Boot setup
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#include <common.h>
+#include <config.h>
+#include <init.h>
+#include <log.h>
+#include <serial.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/sections.h>
+#include <linux/compiler.h>
+
+#include "mxs_init.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+static gd_t gdata __section(".data");
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+static struct bd_info bdata __section(".data");
+#endif
+
+/*
+ * This delay function is intended to be used only in early stage of boot, where
+ * clock are not set up yet.
+ */
+void early_delay(int delay)
+{
+	struct mxs_digctl_regs *digctl_regs =
+		(struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
+
+	uint32_t st = readl(&digctl_regs->hw_digctl_microseconds);
+	while (readl(&digctl_regs->hw_digctl_microseconds) - st <= delay)
+		;
+}
+
+#if defined(CONFIG_MX23)
+#define	MUX_CONFIG_BOOTMODE_PAD	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+static const iomux_cfg_t iomux_boot[] = {
+	MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
+	MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
+	MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
+	MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
+	MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
+	MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
+};
+#endif
+
+static uint8_t mxs_get_bootmode_index(void)
+{
+	uint8_t bootmode = 0;
+	int i;
+	uint8_t masked;
+
+#if defined(CONFIG_MX23)
+	/* Setup IOMUX of bootmode pads to GPIO */
+	mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot));
+
+	/* Setup bootmode pins as GPIO input */
+	gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0);
+	gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1);
+	gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2);
+	gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3);
+	gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5);
+
+	/* Read bootmode pads */
+	bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0;
+	bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1;
+	bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2;
+	bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3;
+	bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
+#elif defined(CONFIG_MX28)
+	/* The global boot mode will be detected by ROM code and its value
+	 * is stored at the fixed address 0x00019BF0 in OCRAM.
+	 */
+#define GLOBAL_BOOT_MODE_ADDR 0x00019BF0
+	bootmode = __raw_readl(GLOBAL_BOOT_MODE_ADDR);
+#endif
+
+	for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) {
+		masked = bootmode & mxs_boot_modes[i].boot_mask;
+		if (masked == mxs_boot_modes[i].boot_pads)
+			break;
+	}
+
+	return i;
+}
+
+static void mxs_spl_fixup_vectors(void)
+{
+	/*
+	 * Copy our vector table to 0x0, since due to HAB, we cannot
+	 * be loaded to 0x0. We want to have working vectoring though,
+	 * thus this fixup. Our vectoring table is PIC, so copying is
+	 * fine.
+	 */
+
+	/* cppcheck-suppress nullPointer */
+	memcpy(0x0, &_start, 0x60);
+}
+
+static void mxs_spl_console_init(void)
+{
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+	gd->bd = &bdata;
+	gd->baudrate = CONFIG_BAUDRATE;
+	serial_init();
+	gd->have_console = 1;
+#endif
+}
+
+void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
+			 const iomux_cfg_t *iomux_setup,
+			 const unsigned int iomux_size)
+{
+	struct mxs_spl_data *data = MXS_SPL_DATA;
+	uint8_t bootmode = mxs_get_bootmode_index();
+	set_gd(&gdata);
+
+	mxs_spl_fixup_vectors();
+
+	mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size);
+
+	mxs_spl_console_init();
+	debug("SPL: Serial Console Initialised\n");
+
+	mxs_power_init();
+
+	mxs_mem_init();
+	data->mem_dram_size = mxs_mem_get_size();
+
+	data->boot_mode_idx = bootmode;
+
+	mxs_power_wait_pswitch();
+
+	if (mxs_boot_modes[data->boot_mode_idx].boot_pads == MXS_BM_JTAG) {
+		debug("SPL: Waiting for JTAG user\n");
+		asm volatile ("x: b x");
+	}
+}
+
+#ifndef CONFIG_SPL_FRAMEWORK
+/* Support aparatus */
+inline void board_init_f(unsigned long bootflag)
+{
+	for (;;)
+		;
+}
+
+inline void board_init_r(gd_t *id, ulong dest_addr)
+{
+	for (;;)
+		;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c
new file mode 100644
index 000000000..2cfbd7809
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale i.MX28 Battery measurement init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#include <common.h>
+#include <config.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+#include "mxs_init.h"
+
+void mxs_lradc_init(void)
+{
+	struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE;
+
+	debug("SPL: Initialisating LRADC\n");
+
+	writel(LRADC_CTRL0_SFTRST, &regs->hw_lradc_ctrl0_clr);
+	writel(LRADC_CTRL0_CLKGATE, &regs->hw_lradc_ctrl0_clr);
+	writel(LRADC_CTRL0_ONCHIP_GROUNDREF, &regs->hw_lradc_ctrl0_clr);
+
+	clrsetbits_le32(&regs->hw_lradc_ctrl3,
+			LRADC_CTRL3_CYCLE_TIME_MASK,
+			LRADC_CTRL3_CYCLE_TIME_6MHZ);
+
+	clrsetbits_le32(&regs->hw_lradc_ctrl4,
+			LRADC_CTRL4_LRADC7SELECT_MASK |
+			LRADC_CTRL4_LRADC6SELECT_MASK,
+			LRADC_CTRL4_LRADC7SELECT_CHANNEL7 |
+			LRADC_CTRL4_LRADC6SELECT_CHANNEL10);
+}
+
+void mxs_lradc_enable_batt_measurement(void)
+{
+	struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE;
+
+	debug("SPL: Enabling LRADC battery measurement\n");
+
+	/* Check if the channel is present at all. */
+	if (!(readl(&regs->hw_lradc_status) & LRADC_STATUS_CHANNEL7_PRESENT)) {
+		debug("SPL: LRADC channel 7 is not present - aborting\n");
+		return;
+	}
+
+	debug("SPL: LRADC channel 7 is present - configuring\n");
+
+	writel(LRADC_CTRL1_LRADC7_IRQ_EN, &regs->hw_lradc_ctrl1_clr);
+	writel(LRADC_CTRL1_LRADC7_IRQ, &regs->hw_lradc_ctrl1_clr);
+
+	clrsetbits_le32(&regs->hw_lradc_conversion,
+			LRADC_CONVERSION_SCALE_FACTOR_MASK,
+			LRADC_CONVERSION_SCALE_FACTOR_LI_ION);
+	writel(LRADC_CONVERSION_AUTOMATIC, &regs->hw_lradc_conversion_set);
+
+	/* Configure the channel. */
+	writel((1 << 7) << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
+		&regs->hw_lradc_ctrl2_clr);
+	writel(0xffffffff, &regs->hw_lradc_ch7_clr);
+	clrbits_le32(&regs->hw_lradc_ch7, LRADC_CH_NUM_SAMPLES_MASK);
+	writel(LRADC_CH_ACCUMULATE, &regs->hw_lradc_ch7_clr);
+
+	/* Schedule the channel. */
+	writel(1 << 7, &regs->hw_lradc_ctrl0_set);
+
+	/* Start the channel sampling. */
+	writel(((1 << 7) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) |
+		((1 << 3) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) |
+		100, &regs->hw_lradc_delay3);
+
+	writel(0xffffffff, &regs->hw_lradc_ch7_clr);
+	writel(LRADC_DELAY_KICK, &regs->hw_lradc_delay3_set);
+
+	debug("SPL: LRADC channel 7 configuration complete\n");
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
new file mode 100644
index 000000000..a94803ee9
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale i.MX28 RAM init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#include <common.h>
+#include <config.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/compiler.h>
+
+#include "mxs_init.h"
+
+__weak uint32_t mxs_dram_vals[] = {
+/*
+ * i.MX28 DDR2 at 200MHz
+ */
+#if defined(CONFIG_MX28)
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000100, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00010101, 0x01010101,
+	0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101,
+	0x00000100, 0x00000100, 0x00000000, 0x00000002,
+	0x01010000, 0x07080403, 0x06005003, 0x0a0000c8,
+	0x02009c40, 0x0002030c, 0x0036a609, 0x031a0612,
+	0x02030202, 0x00c8001c, 0x00000000, 0x00000000,
+	0x00012100, 0xffff0303, 0x00012100, 0xffff0303,
+	0x00012100, 0xffff0303, 0x00012100, 0xffff0303,
+	0x00000003, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000612, 0x01000F02,
+	0x06120612, 0x00000200, 0x00020007, 0xf4004a27,
+	0xf4004a27, 0xf4004a27, 0xf4004a27, 0x07000300,
+	0x07000300, 0x07400300, 0x07400300, 0x00000005,
+	0x00000000, 0x00000000, 0x01000000, 0x01020408,
+	0x08040201, 0x000f1133, 0x00000000, 0x00001f04,
+	0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04,
+	0x00001f04, 0x00001f04, 0x00001f04, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00010000, 0x00030404,
+	0x00000003, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x01010000,
+	0x01000000, 0x03030000, 0x00010303, 0x01020202,
+	0x00000000, 0x02040303, 0x21002103, 0x00061200,
+	0x06120612, 0x04420442, 0x04420442, 0x00040004,
+	0x00040004, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0xffffffff
+
+/*
+ * i.MX23 DDR at 133MHz
+ */
+#elif defined(CONFIG_MX23)
+	0x01010001, 0x00010100, 0x01000101, 0x00000001,
+	0x00000101, 0x00000000, 0x00010000, 0x01000001,
+	0x00000000, 0x00000001, 0x07000200, 0x00070202,
+	0x02020000, 0x04040a01, 0x00000201, 0x02040000,
+	0x02000000, 0x19000f08, 0x0d0d0000, 0x02021313,
+	0x02061521, 0x0000000a, 0x00080008, 0x00200020,
+	0x00200020, 0x00200020, 0x000003f7, 0x00000000,
+	0x00000000, 0x00000020, 0x00000020, 0x00c80000,
+	0x000a23cd, 0x000000c8, 0x00006665, 0x00000000,
+	0x00000101, 0x00040001, 0x00000000, 0x00000000,
+	0x00010000
+#else
+#error Unsupported memory initialization
+#endif
+};
+
+__weak void mxs_adjust_memory_params(uint32_t *dram_vals)
+{
+	debug("SPL: Using default SDRAM parameters\n");
+}
+
+#ifdef CONFIG_MX28
+static void initialize_dram_values(void)
+{
+	int i;
+
+	debug("SPL: Setting mx28 board specific SDRAM parameters\n");
+	mxs_adjust_memory_params(mxs_dram_vals);
+
+	debug("SPL: Applying SDRAM parameters\n");
+	for (i = 0; i < ARRAY_SIZE(mxs_dram_vals); i++)
+		writel(mxs_dram_vals[i], MXS_DRAM_BASE + (4 * i));
+}
+#else
+static void initialize_dram_values(void)
+{
+	int i;
+
+	debug("SPL: Setting mx23 board specific SDRAM parameters\n");
+	mxs_adjust_memory_params(mxs_dram_vals);
+
+	/*
+	 * HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as
+	 * per FSL bootlets code.
+	 *
+	 * mx23 Reference Manual marks HW_DRAM_CTL27 and HW_DRAM_CTL28 as
+	 * "reserved".
+	 * HW_DRAM_CTL8 is setup as the last element.
+	 * So skip the initialization of these HW_DRAM_CTL registers.
+	 */
+	debug("SPL: Applying SDRAM parameters\n");
+	for (i = 0; i < ARRAY_SIZE(mxs_dram_vals); i++) {
+		if (i == 8 || i == 27 || i == 28 || i == 35)
+			continue;
+		writel(mxs_dram_vals[i], MXS_DRAM_BASE + (4 * i));
+	}
+
+	/*
+	 * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last
+	 * element to be set
+	 */
+	writel((1 << 24), MXS_DRAM_BASE + (4 * 8));
+}
+#endif
+
+static void mxs_mem_init_clock(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+#if defined(CONFIG_MX23)
+	/* Fractional divider for ref_emi is 33 ; 480 * 18 / 33 = 266MHz */
+	const unsigned char divider = 33;
+#elif defined(CONFIG_MX28)
+	/* Fractional divider for ref_emi is 21 ; 480 * 18 / 21 = 411MHz */
+	const unsigned char divider = 21;
+#endif
+
+	debug("SPL: Initialising FRAC0\n");
+
+	/* Gate EMI clock */
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]);
+
+	/* Set fractional divider for ref_emi */
+	writeb(CLKCTRL_FRAC_CLKGATE | (divider & CLKCTRL_FRAC_FRAC_MASK),
+		&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
+
+	/* Ungate EMI clock */
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_EMI]);
+
+	early_delay(11000);
+
+	/* Set EMI clock divider for EMI clock to 411 / 2 = 205MHz */
+	writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) |
+		(1 << CLKCTRL_EMI_DIV_XTAL_OFFSET),
+		&clkctrl_regs->hw_clkctrl_emi);
+
+	/* Unbypass EMI */
+	writel(CLKCTRL_CLKSEQ_BYPASS_EMI,
+		&clkctrl_regs->hw_clkctrl_clkseq_clr);
+
+	early_delay(10000);
+	debug("SPL: FRAC0 Initialised\n");
+}
+
+static void mxs_mem_setup_cpu_and_hbus(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	debug("SPL: Setting CPU and HBUS clock frequencies\n");
+
+	/* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz
+	 * and ungate CPU clock */
+	writeb(19 & CLKCTRL_FRAC_FRAC_MASK,
+		(uint8_t *)&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]);
+
+	/* Set CPU bypass */
+	writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+		&clkctrl_regs->hw_clkctrl_clkseq_set);
+
+	/* HBUS = 151MHz */
+	writel(CLKCTRL_HBUS_DIV_MASK, &clkctrl_regs->hw_clkctrl_hbus_set);
+	writel(((~3) << CLKCTRL_HBUS_DIV_OFFSET) & CLKCTRL_HBUS_DIV_MASK,
+		&clkctrl_regs->hw_clkctrl_hbus_clr);
+
+	early_delay(10000);
+
+	/* CPU clock divider = 1 */
+	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_cpu,
+			CLKCTRL_CPU_DIV_CPU_MASK, 1);
+
+	/* Disable CPU bypass */
+	writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+		&clkctrl_regs->hw_clkctrl_clkseq_clr);
+
+	early_delay(15000);
+}
+
+static void mxs_mem_setup_vdda(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Configuring VDDA\n");
+
+	writel((0xc << POWER_VDDACTRL_TRG_OFFSET) |
+		(0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) |
+		POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW,
+		&power_regs->hw_power_vddactrl);
+}
+
+uint32_t mxs_mem_get_size(void)
+{
+	uint32_t sz, da;
+	uint32_t *vt = (uint32_t *)0x20;
+	/* The following is "subs pc, r14, #4", used as return from DABT. */
+	const uint32_t data_abort_memdetect_handler = 0xe25ef004;
+
+	/* Replace the DABT handler. */
+	da = vt[4];
+	vt[4] = data_abort_memdetect_handler;
+
+	sz = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+
+	/* Restore the old DABT handler. */
+	vt[4] = da;
+
+	return sz;
+}
+
+#ifdef CONFIG_MX23
+static void mx23_mem_setup_vddmem(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Setting mx23 VDDMEM\n");
+
+	/* We must wait before and after disabling the current limiter! */
+	early_delay(10000);
+
+	clrbits_le32(&power_regs->hw_power_vddmemctrl,
+		POWER_VDDMEMCTRL_ENABLE_ILIMIT);
+
+	early_delay(10000);
+
+}
+
+static void mx23_mem_init(void)
+{
+	debug("SPL: Initialising mx23 SDRAM Controller\n");
+
+	/*
+	 * Reset/ungate the EMI block. This is essential, otherwise the system
+	 * suffers from memory instability. This thing is mx23 specific and is
+	 * no longer present on mx28.
+	 */
+	mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE);
+
+	mx23_mem_setup_vddmem();
+
+	/*
+	 * Configure the DRAM registers
+	 */
+
+	/* Clear START and SREFRESH bit from DRAM_CTL8 */
+	clrbits_le32(MXS_DRAM_BASE + 0x20, (1 << 16) | (1 << 8));
+
+	initialize_dram_values();
+
+	/* Set START bit in DRAM_CTL8 */
+	setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16);
+
+	clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17);
+
+	/* Wait for EMI_STAT bit DRAM_HALTED */
+	for (;;) {
+		if (!(readl(MXS_EMI_BASE + 0x10) & (1 << 1)))
+			break;
+		early_delay(1000);
+	}
+
+	/* Adjust EMI port priority. */
+	clrsetbits_le32(0x80020000, 0x1f << 16, 0x2);
+	early_delay(20000);
+
+	setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 19);
+	setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 11);
+}
+#endif
+
+#ifdef CONFIG_MX28
+static void mx28_mem_init(void)
+{
+	struct mxs_pinctrl_regs *pinctrl_regs =
+		(struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE;
+
+	debug("SPL: Initialising mx28 SDRAM Controller\n");
+
+	/* Set DDR2 mode */
+	writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
+		&pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set);
+
+	/*
+	 * Configure the DRAM registers
+	 */
+
+	/* Clear START bit from DRAM_CTL16 */
+	clrbits_le32(MXS_DRAM_BASE + 0x40, 1);
+
+	initialize_dram_values();
+
+	/* Clear SREFRESH bit from DRAM_CTL17 */
+	clrbits_le32(MXS_DRAM_BASE + 0x44, 1);
+
+	/* Set START bit in DRAM_CTL16 */
+	setbits_le32(MXS_DRAM_BASE + 0x40, 1);
+
+	/* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */
+	while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20)))
+		;
+}
+#endif
+
+void mxs_mem_init(void)
+{
+	early_delay(11000);
+
+	mxs_mem_init_clock();
+
+	mxs_mem_setup_vdda();
+
+#if defined(CONFIG_MX23)
+	mx23_mem_init();
+#elif defined(CONFIG_MX28)
+	mx28_mem_init();
+#endif
+
+	early_delay(10000);
+
+	mxs_mem_setup_cpu_and_hbus();
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
new file mode 100644
index 000000000..35ea71a5b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -0,0 +1,1291 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale i.MX28 Boot PMIC init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#include <common.h>
+#include <config.h>
+#include <hang.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+#include "mxs_init.h"
+
+#ifdef CONFIG_SYS_MXS_VDD5V_ONLY
+#define DCDC4P2_DROPOUT_CONFIG	POWER_DCDC4P2_DROPOUT_CTRL_100MV | \
+				POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2
+#else
+#define DCDC4P2_DROPOUT_CONFIG	POWER_DCDC4P2_DROPOUT_CTRL_100MV | \
+				POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL
+#endif
+/**
+ * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL
+ *
+ * This function switches the CPU core clock from PLL to 24MHz XTAL
+ * oscilator. This is necessary if the PLL is being reconfigured to
+ * prevent crash of the CPU core.
+ */
+static void mxs_power_clock2xtal(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	debug("SPL: Switching CPU clock to 24MHz XTAL\n");
+
+	/* Set XTAL as CPU reference clock */
+	writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+		&clkctrl_regs->hw_clkctrl_clkseq_set);
+}
+
+/**
+ * mxs_power_clock2pll() - Switch CPU core clock source to PLL
+ *
+ * This function switches the CPU core clock from 24MHz XTAL oscilator
+ * to PLL. This can only be called once the PLL has re-locked and once
+ * the PLL is stable after reconfiguration.
+ */
+static void mxs_power_clock2pll(void)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	debug("SPL: Switching CPU core clock source to PLL\n");
+
+	/*
+	 * TODO: Are we really? It looks like we turn on PLL0, but we then
+	 * set the CLKCTRL_CLKSEQ_BYPASS_CPU bit of the (which was already
+	 * set by mxs_power_clock2xtal()). Clearing this bit here seems to
+	 * introduce some instability (causing the CPU core to hang). Maybe
+	 * we aren't giving PLL0 enough time to stabilise?
+	 */
+	setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0,
+			CLKCTRL_PLL0CTRL0_POWER);
+	early_delay(100);
+
+	/*
+	 * TODO: Should the PLL0 FORCE_LOCK bit be set here followed be a
+	 * wait on the PLL0 LOCK bit?
+	 */
+	setbits_le32(&clkctrl_regs->hw_clkctrl_clkseq,
+			CLKCTRL_CLKSEQ_BYPASS_CPU);
+}
+
+/**
+ * mxs_power_set_auto_restart() - Set the auto-restart bit
+ *
+ * This function ungates the RTC block and sets the AUTO_RESTART
+ * bit to work around a design bug on MX28EVK Rev. A .
+ */
+
+static void mxs_power_set_auto_restart(void)
+{
+	struct mxs_rtc_regs *rtc_regs =
+		(struct mxs_rtc_regs *)MXS_RTC_BASE;
+
+	debug("SPL: Setting auto-restart bit\n");
+
+	writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
+	while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
+		;
+
+	writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
+	while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
+		;
+
+	/* Do nothing if flag already set */
+	if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
+		return;
+
+	while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
+		;
+
+	setbits_le32(&rtc_regs->hw_rtc_persistent0,
+			RTC_PERSISTENT0_AUTO_RESTART);
+	writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
+	writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
+	while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
+		;
+	while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
+		;
+}
+
+/**
+ * mxs_power_set_linreg() - Set linear regulators 25mV below DC-DC converter
+ *
+ * This function configures the VDDIO, VDDA and VDDD linear regulators output
+ * to be 25mV below the VDDIO, VDDA and VDDD output from the DC-DC switching
+ * converter. This is the recommended setting for the case where we use both
+ * linear regulators and DC-DC converter to power the VDDIO rail.
+ */
+static void mxs_power_set_linreg(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	/* Set linear regulator 25mV below switching converter */
+	debug("SPL: Setting VDDD 25mV below DC-DC converters\n");
+	clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+			POWER_VDDDCTRL_LINREG_OFFSET_MASK,
+			POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+	debug("SPL: Setting VDDA 25mV below DC-DC converters\n");
+	clrsetbits_le32(&power_regs->hw_power_vddactrl,
+			POWER_VDDACTRL_LINREG_OFFSET_MASK,
+			POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+	debug("SPL: Setting VDDIO 25mV below DC-DC converters\n");
+	clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+			POWER_VDDIOCTRL_LINREG_OFFSET_MASK,
+			POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
+}
+
+/**
+ * mxs_get_batt_volt() - Measure battery input voltage
+ *
+ * This function retrieves the battery input voltage and returns it.
+ */
+static int mxs_get_batt_volt(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t volt = readl(&power_regs->hw_power_battmonitor);
+	volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
+	volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
+	volt *= 8;
+
+	debug("SPL: Battery Voltage = %dmV\n", volt);
+	return volt;
+}
+
+/**
+ * mxs_is_batt_ready() - Test if the battery provides enough voltage to boot
+ *
+ * This function checks if the battery input voltage is higher than 3.6V and
+ * therefore allows the system to successfully boot using this power source.
+ */
+static int mxs_is_batt_ready(void)
+{
+	return (mxs_get_batt_volt() >= 3600);
+}
+
+/**
+ * mxs_is_batt_good() - Test if battery is operational at all
+ *
+ * This function starts recharging the battery and tests if the input current
+ * provided by the 5V input recharging the battery is also sufficient to power
+ * the DC-DC converter.
+ */
+static int mxs_is_batt_good(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t volt = mxs_get_batt_volt();
+
+	if ((volt >= 2400) && (volt <= 4300)) {
+		debug("SPL: Battery is good\n");
+		return 1;
+	}
+
+	clrsetbits_le32(&power_regs->hw_power_5vctrl,
+		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+		0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+	writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+		&power_regs->hw_power_5vctrl_clr);
+
+	clrsetbits_le32(&power_regs->hw_power_charge,
+		POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
+		POWER_CHARGE_STOP_ILIMIT_10MA | 0x3);
+
+	writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr);
+	writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+		&power_regs->hw_power_5vctrl_clr);
+
+	early_delay(500000);
+
+	volt = mxs_get_batt_volt();
+
+	if (volt >= 3500) {
+		debug("SPL: Battery Voltage too high\n");
+		return 0;
+	}
+
+	if (volt >= 2400) {
+		debug("SPL: Battery is good\n");
+		return 1;
+	}
+
+	writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
+		&power_regs->hw_power_charge_clr);
+	writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);
+
+	debug("SPL: Battery Voltage too low\n");
+	return 0;
+}
+
+/**
+ * mxs_power_setup_5v_detect() - Start the 5V input detection comparator
+ *
+ * This function enables the 5V detection comparator and sets the 5V valid
+ * threshold to 4.4V . We use 4.4V threshold here to make sure that even
+ * under high load, the voltage drop on the 5V input won't be so critical
+ * to cause undervolt on the 4P2 linear regulator supplying the DC-DC
+ * converter and thus making the system crash.
+ */
+static void mxs_power_setup_5v_detect(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	/* Start 5V detection */
+	debug("SPL: Starting 5V input detection comparator\n");
+	clrsetbits_le32(&power_regs->hw_power_5vctrl,
+			POWER_5VCTRL_VBUSVALID_TRSH_MASK,
+			POWER_5VCTRL_VBUSVALID_TRSH_4V4 |
+			POWER_5VCTRL_PWRUP_VBUS_CMPS);
+}
+
+/**
+ * mxs_power_switch_dcdc_clocksource() - Switch PLL clock for DC-DC converters
+ * @freqsel:	One of the POWER_MISC_FREQSEL_xxx defines to select the clock
+ *
+ * This function configures and then enables an alternative PLL clock source
+ * for the DC-DC converters.
+ */
+void mxs_power_switch_dcdc_clocksource(uint32_t freqsel)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	/* Select clocksource for DC-DC converters */
+	clrsetbits_le32(&power_regs->hw_power_misc,
+			POWER_MISC_FREQSEL_MASK,
+			freqsel);
+	setbits_le32(&power_regs->hw_power_misc,
+			POWER_MISC_SEL_PLLCLK);
+}
+
+/**
+ * mxs_power_setup_dcdc_clocksource() - Setup PLL clock source for DC-DC converters
+ *
+ * Normally, there is no need to switch DC-DC clocksource. This is the reason,
+ * why this function is a stub and does nothing. However, boards can implement
+ * this function when required and call mxs_power_switch_dcdc_clocksource() to
+ * switch to an alternative clock source.
+ */
+__weak void mxs_power_setup_dcdc_clocksource(void)
+{
+	debug("SPL: Using default DC-DC clocksource\n");
+}
+
+/**
+ * mxs_src_power_init() - Preconfigure the power block
+ *
+ * This function configures reasonable values for the DC-DC control loop
+ * and battery monitor.
+ */
+static void mxs_src_power_init(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Pre-Configuring power block\n");
+
+	/* Improve efficieny and reduce transient ripple */
+	writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
+		POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);
+
+	clrsetbits_le32(&power_regs->hw_power_dclimits,
+			POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
+			0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);
+
+	setbits_le32(&power_regs->hw_power_battmonitor,
+			POWER_BATTMONITOR_EN_BATADJ);
+
+	/* Increase the RCSCALE level for quick DCDC response to dynamic load */
+	clrsetbits_le32(&power_regs->hw_power_loopctrl,
+			POWER_LOOPCTRL_EN_RCSCALE_MASK,
+			POWER_LOOPCTRL_RCSCALE_THRESH |
+			POWER_LOOPCTRL_EN_RCSCALE_8X);
+
+	clrsetbits_le32(&power_regs->hw_power_minpwr,
+			POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
+
+	/* 5V to battery handoff ... FIXME */
+	setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+	early_delay(30);
+	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+}
+
+/**
+ * mxs_power_init_4p2_params() - Configure the parameters of the 4P2 regulator
+ *
+ * This function configures the necessary parameters for the 4P2 linear
+ * regulator to supply the DC-DC converter from 5V input.
+ */
+static void mxs_power_init_4p2_params(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Configuring common 4P2 regulator params\n");
+
+	/* Setup 4P2 parameters */
+	clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+		POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
+		POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET));
+
+	clrsetbits_le32(&power_regs->hw_power_5vctrl,
+		POWER_5VCTRL_HEADROOM_ADJ_MASK,
+		0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
+
+	clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+		POWER_DCDC4P2_DROPOUT_CTRL_MASK,
+		DCDC4P2_DROPOUT_CONFIG);
+
+	clrsetbits_le32(&power_regs->hw_power_5vctrl,
+		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+		0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+}
+
+/**
+ * mxs_enable_4p2_dcdc_input() - Enable or disable the DCDC input from 4P2
+ * @xfer:	Select if the input shall be enabled or disabled
+ *
+ * This function enables or disables the 4P2 input into the DC-DC converter.
+ */
+static void mxs_enable_4p2_dcdc_input(int xfer)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
+	uint32_t prev_5v_brnout, prev_5v_droop;
+
+	debug("SPL: %s 4P2 DC-DC Input\n", xfer ? "Enabling" : "Disabling");
+
+	if (xfer && (readl(&power_regs->hw_power_5vctrl) &
+			POWER_5VCTRL_ENABLE_DCDC)) {
+		return;
+	}
+
+	prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
+				POWER_5VCTRL_PWDN_5VBRNOUT;
+	prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
+				POWER_CTRL_ENIRQ_VDD5V_DROOP;
+
+	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
+	writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+		&power_regs->hw_power_reset);
+
+	clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);
+
+	/*
+	 * Recording orignal values that will be modified temporarlily
+	 * to handle a chip bug. See chip errata for CQ ENGR00115837
+	 */
+	tmp = readl(&power_regs->hw_power_5vctrl);
+	vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK;
+	vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT;
+
+	pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO;
+
+	/*
+	 * Disable mechanisms that get erroneously tripped by when setting
+	 * the DCDC4P2 EN_DCDC
+	 */
+	clrbits_le32(&power_regs->hw_power_5vctrl,
+		POWER_5VCTRL_VBUSVALID_5VDETECT |
+		POWER_5VCTRL_VBUSVALID_TRSH_MASK);
+
+	writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set);
+
+	if (xfer) {
+		setbits_le32(&power_regs->hw_power_5vctrl,
+				POWER_5VCTRL_DCDC_XFER);
+		early_delay(20);
+		clrbits_le32(&power_regs->hw_power_5vctrl,
+				POWER_5VCTRL_DCDC_XFER);
+
+		setbits_le32(&power_regs->hw_power_5vctrl,
+				POWER_5VCTRL_ENABLE_DCDC);
+	} else {
+		setbits_le32(&power_regs->hw_power_dcdc4p2,
+				POWER_DCDC4P2_ENABLE_DCDC);
+	}
+
+	early_delay(25);
+
+	clrsetbits_le32(&power_regs->hw_power_5vctrl,
+			POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh);
+
+	if (vbus_5vdetect)
+		writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set);
+
+	if (!pwd_bo)
+		clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);
+
+	while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
+		writel(POWER_CTRL_VBUS_VALID_IRQ,
+			&power_regs->hw_power_ctrl_clr);
+
+	if (prev_5v_brnout) {
+		writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+			&power_regs->hw_power_5vctrl_set);
+		writel(POWER_RESET_UNLOCK_KEY,
+			&power_regs->hw_power_reset);
+	} else {
+		writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+			&power_regs->hw_power_5vctrl_clr);
+		writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+			&power_regs->hw_power_reset);
+	}
+
+	while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
+		writel(POWER_CTRL_VDD5V_DROOP_IRQ,
+			&power_regs->hw_power_ctrl_clr);
+
+	if (prev_5v_droop)
+		clrbits_le32(&power_regs->hw_power_ctrl,
+				POWER_CTRL_ENIRQ_VDD5V_DROOP);
+	else
+		setbits_le32(&power_regs->hw_power_ctrl,
+				POWER_CTRL_ENIRQ_VDD5V_DROOP);
+}
+
+/**
+ * mxs_power_init_4p2_regulator() - Start the 4P2 regulator
+ *
+ * This function enables the 4P2 regulator and switches the DC-DC converter
+ * to use the 4P2 input.
+ */
+static void mxs_power_init_4p2_regulator(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t tmp, tmp2;
+
+	debug("SPL: Enabling 4P2 regulator\n");
+
+	setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);
+
+	writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set);
+
+	writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+		&power_regs->hw_power_5vctrl_clr);
+	clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK);
+
+	/* Power up the 4p2 rail and logic/control */
+	writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+		&power_regs->hw_power_5vctrl_clr);
+
+	/*
+	 * Start charging up the 4p2 capacitor. We ramp of this charge
+	 * gradually to avoid large inrush current from the 5V cable which can
+	 * cause transients/problems
+	 */
+	debug("SPL: Charging 4P2 capacitor\n");
+	mxs_enable_4p2_dcdc_input(0);
+
+	if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
+		/*
+		 * If we arrived here, we were unable to recover from mx23 chip
+		 * errata 5837. 4P2 is disabled and sufficient battery power is
+		 * not present. Exiting to not enable DCDC power during 5V
+		 * connected state.
+		 */
+		clrbits_le32(&power_regs->hw_power_dcdc4p2,
+			POWER_DCDC4P2_ENABLE_DCDC);
+		writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+			&power_regs->hw_power_5vctrl_set);
+
+		debug("SPL: Unable to recover from mx23 errata 5837\n");
+		hang();
+	}
+
+	/*
+	 * Here we set the 4p2 brownout level to something very close to 4.2V.
+	 * We then check the brownout status. If the brownout status is false,
+	 * the voltage is already close to the target voltage of 4.2V so we
+	 * can go ahead and set the 4P2 current limit to our max target limit.
+	 * If the brownout status is true, we need to ramp us the current limit
+	 * so that we don't cause large inrush current issues. We step up the
+	 * current limit until the brownout status is false or until we've
+	 * reached our maximum defined 4p2 current limit.
+	 */
+	debug("SPL: Setting 4P2 brownout level\n");
+	clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+			POWER_DCDC4P2_BO_MASK,
+			22 << POWER_DCDC4P2_BO_OFFSET);	/* 4.15V */
+
+	if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) {
+		setbits_le32(&power_regs->hw_power_5vctrl,
+			0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+	} else {
+		tmp = (readl(&power_regs->hw_power_5vctrl) &
+			POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >>
+			POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
+		while (tmp < 0x3f) {
+			if (!(readl(&power_regs->hw_power_sts) &
+					POWER_STS_DCDC_4P2_BO)) {
+				tmp = readl(&power_regs->hw_power_5vctrl);
+				tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
+				early_delay(100);
+				writel(tmp, &power_regs->hw_power_5vctrl);
+				break;
+			} else {
+				tmp++;
+				tmp2 = readl(&power_regs->hw_power_5vctrl);
+				tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
+				tmp2 |= tmp <<
+					POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
+				writel(tmp2, &power_regs->hw_power_5vctrl);
+				early_delay(100);
+			}
+		}
+	}
+
+	clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
+	writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+}
+
+/**
+ * mxs_power_init_dcdc_4p2_source() - Switch DC-DC converter to 4P2 source
+ *
+ * This function configures the DC-DC converter to be supplied from the 4P2
+ * linear regulator.
+ */
+static void mxs_power_init_dcdc_4p2_source(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Switching DC-DC converters to 4P2\n");
+
+	if (!(readl(&power_regs->hw_power_dcdc4p2) &
+		POWER_DCDC4P2_ENABLE_DCDC)) {
+		debug("SPL: Already switched - aborting\n");
+		hang();
+	}
+
+	mxs_enable_4p2_dcdc_input(1);
+
+	if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
+		clrbits_le32(&power_regs->hw_power_dcdc4p2,
+			POWER_DCDC4P2_ENABLE_DCDC);
+		writel(POWER_5VCTRL_ENABLE_DCDC,
+			&power_regs->hw_power_5vctrl_clr);
+		writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+			&power_regs->hw_power_5vctrl_set);
+	}
+}
+
+/**
+ * mxs_power_enable_4p2() - Power up the 4P2 regulator
+ *
+ * This function drives the process of powering up the 4P2 linear regulator
+ * and switching the DC-DC converter input over to the 4P2 linear regulator.
+ */
+static void mxs_power_enable_4p2(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t vdddctrl, vddactrl, vddioctrl;
+	uint32_t tmp;
+
+	debug("SPL: Powering up 4P2 regulator\n");
+
+	vdddctrl = readl(&power_regs->hw_power_vdddctrl);
+	vddactrl = readl(&power_regs->hw_power_vddactrl);
+	vddioctrl = readl(&power_regs->hw_power_vddioctrl);
+
+	setbits_le32(&power_regs->hw_power_vdddctrl,
+		POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
+		POWER_VDDDCTRL_PWDN_BRNOUT);
+
+	setbits_le32(&power_regs->hw_power_vddactrl,
+		POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
+		POWER_VDDACTRL_PWDN_BRNOUT);
+
+	setbits_le32(&power_regs->hw_power_vddioctrl,
+		POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT);
+
+	mxs_power_init_4p2_params();
+	mxs_power_init_4p2_regulator();
+
+	/* Shutdown battery (none present) */
+	if (!mxs_is_batt_ready()) {
+		clrbits_le32(&power_regs->hw_power_dcdc4p2,
+				POWER_DCDC4P2_BO_MASK);
+		writel(POWER_CTRL_DCDC4P2_BO_IRQ,
+				&power_regs->hw_power_ctrl_clr);
+		writel(POWER_CTRL_ENIRQ_DCDC4P2_BO,
+				&power_regs->hw_power_ctrl_clr);
+	}
+
+	mxs_power_init_dcdc_4p2_source();
+
+	writel(vdddctrl, &power_regs->hw_power_vdddctrl);
+	early_delay(20);
+	writel(vddactrl, &power_regs->hw_power_vddactrl);
+	early_delay(20);
+	writel(vddioctrl, &power_regs->hw_power_vddioctrl);
+
+	/*
+	 * Check if FET is enabled on either powerout and if so,
+	 * disable load.
+	 */
+	tmp = 0;
+	tmp |= !(readl(&power_regs->hw_power_vdddctrl) &
+			POWER_VDDDCTRL_DISABLE_FET);
+	tmp |= !(readl(&power_regs->hw_power_vddactrl) &
+			POWER_VDDACTRL_DISABLE_FET);
+	tmp |= !(readl(&power_regs->hw_power_vddioctrl) &
+			POWER_VDDIOCTRL_DISABLE_FET);
+	if (tmp)
+		writel(POWER_CHARGE_ENABLE_LOAD,
+			&power_regs->hw_power_charge_clr);
+
+	debug("SPL: 4P2 regulator powered-up\n");
+}
+
+/**
+ * mxs_boot_valid_5v() - Boot from 5V supply
+ *
+ * This function configures the power block to boot from valid 5V input.
+ * This is called only if the 5V is reliable and can properly supply the
+ * CPU. This function proceeds to configure the 4P2 converter to be supplied
+ * from the 5V input.
+ */
+static void mxs_boot_valid_5v(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Booting from 5V supply\n");
+
+	/*
+	 * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
+	 * disconnect event. FIXME
+	 */
+	writel(POWER_5VCTRL_VBUSVALID_5VDETECT,
+		&power_regs->hw_power_5vctrl_set);
+
+	/* Configure polarity to check for 5V disconnection. */
+	writel(POWER_CTRL_POLARITY_VBUSVALID |
+		POWER_CTRL_POLARITY_VDD5V_GT_VDDIO,
+		&power_regs->hw_power_ctrl_clr);
+
+	writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ,
+		&power_regs->hw_power_ctrl_clr);
+
+	mxs_power_enable_4p2();
+}
+
+/**
+ * mxs_powerdown() - Shut down the system
+ *
+ * This function powers down the CPU completely.
+ */
+static void mxs_powerdown(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("Powering Down\n");
+
+	writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
+	writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+		&power_regs->hw_power_reset);
+}
+
+/**
+ * mxs_batt_boot() - Configure the power block to boot from battery input
+ *
+ * This function configures the power block to boot from the battery voltage
+ * supply.
+ */
+static void mxs_batt_boot(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Configuring power block to boot from battery\n");
+
+	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
+	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC);
+
+	clrbits_le32(&power_regs->hw_power_dcdc4p2,
+			POWER_DCDC4P2_ENABLE_DCDC | POWER_DCDC4P2_ENABLE_4P2);
+	writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_clr);
+
+	/* 5V to battery handoff. */
+	setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+	early_delay(30);
+	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+
+	writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr);
+
+	clrsetbits_le32(&power_regs->hw_power_minpwr,
+			POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
+
+	mxs_power_set_linreg();
+
+	clrbits_le32(&power_regs->hw_power_vdddctrl,
+		POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG);
+
+	clrbits_le32(&power_regs->hw_power_vddactrl,
+		POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG);
+
+	clrbits_le32(&power_regs->hw_power_vddioctrl,
+		POWER_VDDIOCTRL_DISABLE_FET);
+
+	setbits_le32(&power_regs->hw_power_5vctrl,
+		POWER_5VCTRL_PWD_CHARGE_4P2_MASK);
+
+	setbits_le32(&power_regs->hw_power_5vctrl,
+		POWER_5VCTRL_ENABLE_DCDC);
+
+	clrsetbits_le32(&power_regs->hw_power_5vctrl,
+		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+		0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+
+	mxs_power_enable_4p2();
+}
+
+/**
+ * mxs_handle_5v_conflict() - Test if the 5V input is reliable
+ *
+ * This function tests if the 5V input can reliably supply the system. If it
+ * can, then proceed to configuring the system to boot from 5V source, otherwise
+ * try booting from battery supply. If we can not boot from battery supply
+ * either, shut down the system.
+ */
+static void mxs_handle_5v_conflict(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t tmp;
+
+	debug("SPL: Resolving 5V conflict\n");
+
+	setbits_le32(&power_regs->hw_power_vddioctrl,
+			POWER_VDDIOCTRL_BO_OFFSET_MASK);
+
+	for (;;) {
+		tmp = readl(&power_regs->hw_power_sts);
+
+		if (tmp & POWER_STS_VDDIO_BO) {
+			/*
+			 * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes
+			 * unreliable
+			 */
+			debug("SPL: VDDIO has a brownout\n");
+			mxs_powerdown();
+			break;
+		}
+
+		if (tmp & POWER_STS_VDD5V_GT_VDDIO) {
+			debug("SPL: POWER_STS_VDD5V_GT_VDDIO is set\n");
+			mxs_boot_valid_5v();
+			break;
+		} else {
+			debug("SPL: POWER_STS_VDD5V_GT_VDDIO is not set\n");
+			mxs_powerdown();
+			break;
+		}
+
+		/*
+		 * TODO: I can't see this being reached. We'll either
+		 * powerdown or boot from a stable 5V supply.
+		 */
+		if (tmp & POWER_STS_PSWITCH_MASK) {
+			debug("SPL: POWER_STS_PSWITCH_MASK is set\n");
+			mxs_batt_boot();
+			break;
+		}
+	}
+}
+
+/**
+ * mxs_5v_boot() - Configure the power block to boot from 5V input
+ *
+ * This function handles configuration of the power block when supplied by
+ * a 5V input.
+ */
+static void mxs_5v_boot(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Configuring power block to boot from 5V input\n");
+
+	/*
+	 * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
+	 * but their implementation always returns 1 so we omit it here.
+	 */
+	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+		debug("SPL: 5V VDD good\n");
+		mxs_boot_valid_5v();
+		return;
+	}
+
+	early_delay(1000);
+	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+		debug("SPL: 5V VDD good (after delay)\n");
+		mxs_boot_valid_5v();
+		return;
+	}
+
+	debug("SPL: 5V VDD not good\n");
+	mxs_handle_5v_conflict();
+}
+
+/**
+ * mxs_init_batt_bo() - Configure battery brownout threshold
+ *
+ * This function configures the battery input brownout threshold. The value
+ * at which the battery brownout happens is configured to 3.0V in the code.
+ */
+static void mxs_init_batt_bo(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Initialising battery brown-out level to 3.0V\n");
+
+	/* Brownout at 3V */
+	clrsetbits_le32(&power_regs->hw_power_battmonitor,
+		POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
+		15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
+
+	writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+	writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
+}
+
+/**
+ * mxs_switch_vddd_to_dcdc_source() - Switch VDDD rail to DC-DC converter
+ *
+ * This function turns off the VDDD linear regulator and therefore makes
+ * the VDDD rail be supplied only by the DC-DC converter.
+ */
+static void mxs_switch_vddd_to_dcdc_source(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Switching VDDD to DC-DC converters\n");
+
+	clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+		POWER_VDDDCTRL_LINREG_OFFSET_MASK,
+		POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+	clrbits_le32(&power_regs->hw_power_vdddctrl,
+		POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
+		POWER_VDDDCTRL_DISABLE_STEPPING);
+}
+
+/**
+ * mxs_power_configure_power_source() - Configure power block source
+ *
+ * This function is the core of the power configuration logic. The function
+ * selects the power block input source and configures the whole power block
+ * accordingly. After the configuration is complete and the system is stable
+ * again, the function switches the CPU clock source back to PLL. Finally,
+ * the function switches the voltage rails to DC-DC converter.
+ */
+static void mxs_power_configure_power_source(void)
+{
+	int batt_ready, batt_good;
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	struct mxs_lradc_regs *lradc_regs =
+		(struct mxs_lradc_regs *)MXS_LRADC_BASE;
+
+	debug("SPL: Configuring power source\n");
+
+	mxs_power_setup_dcdc_clocksource();
+	mxs_src_power_init();
+
+	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+		batt_ready = mxs_is_batt_ready();
+		if (batt_ready) {
+			/* 5V source detected, good battery detected. */
+			mxs_batt_boot();
+		} else {
+			batt_good = mxs_is_batt_good();
+			if (!batt_good) {
+				/* 5V source detected, bad battery detected. */
+				writel(LRADC_CONVERSION_AUTOMATIC,
+					&lradc_regs->hw_lradc_conversion_clr);
+				clrbits_le32(&power_regs->hw_power_battmonitor,
+					POWER_BATTMONITOR_BATT_VAL_MASK);
+			}
+			mxs_5v_boot();
+		}
+	} else {
+		/* 5V not detected, booting from battery. */
+		mxs_batt_boot();
+	}
+
+	/*
+	 * TODO: Do not switch CPU clock to PLL if we are VDD5V is sourced
+	 * from USB VBUS
+	 */
+	mxs_power_clock2pll();
+
+	mxs_init_batt_bo();
+
+	mxs_switch_vddd_to_dcdc_source();
+
+#ifdef CONFIG_MX23
+	/* Fire up the VDDMEM LinReg now that we're all set. */
+	debug("SPL: Enabling mx23 VDDMEM linear regulator\n");
+	writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT,
+		&power_regs->hw_power_vddmemctrl);
+#endif
+}
+
+/**
+ * mxs_enable_output_rail_protection() - Enable power rail protection
+ *
+ * This function enables overload protection on the power rails. This is
+ * triggered if the power rails' voltage drops rapidly due to overload and
+ * in such case, the supply to the powerrail is cut-off, protecting the
+ * CPU from damage. Note that under such condition, the system will likely
+ * crash or misbehave.
+ */
+static void mxs_enable_output_rail_protection(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Enabling output rail protection\n");
+
+	writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+		POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+	setbits_le32(&power_regs->hw_power_vdddctrl,
+			POWER_VDDDCTRL_PWDN_BRNOUT);
+
+	setbits_le32(&power_regs->hw_power_vddactrl,
+			POWER_VDDACTRL_PWDN_BRNOUT);
+
+	setbits_le32(&power_regs->hw_power_vddioctrl,
+			POWER_VDDIOCTRL_PWDN_BRNOUT);
+}
+
+/**
+ * mxs_get_vddio_power_source_off() - Get VDDIO rail power source
+ *
+ * This function tests if the VDDIO rail is supplied by linear regulator
+ * or by the DC-DC converter. Returns 1 if powered by linear regulator,
+ * returns 0 if powered by the DC-DC converter.
+ */
+static int mxs_get_vddio_power_source_off(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t tmp;
+
+	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+		tmp = readl(&power_regs->hw_power_vddioctrl);
+		if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
+			if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
+				POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) {
+				return 1;
+			}
+		}
+
+		if (!(readl(&power_regs->hw_power_5vctrl) &
+			POWER_5VCTRL_ENABLE_DCDC)) {
+			if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
+				POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) {
+				return 1;
+			}
+		}
+	}
+
+	return 0;
+
+}
+
+/**
+ * mxs_get_vddd_power_source_off() - Get VDDD rail power source
+ *
+ * This function tests if the VDDD rail is supplied by linear regulator
+ * or by the DC-DC converter. Returns 1 if powered by linear regulator,
+ * returns 0 if powered by the DC-DC converter.
+ */
+static int mxs_get_vddd_power_source_off(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t tmp;
+
+	tmp = readl(&power_regs->hw_power_vdddctrl);
+	if (tmp & POWER_VDDDCTRL_DISABLE_FET) {
+		if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
+			POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
+			return 1;
+		}
+	}
+
+	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+		if (!(readl(&power_regs->hw_power_5vctrl) &
+			POWER_5VCTRL_ENABLE_DCDC)) {
+			return 1;
+		}
+	}
+
+	if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) {
+		if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
+			POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) {
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+struct mxs_vddx_cfg {
+	uint32_t		*reg;
+	uint8_t			step_mV;
+	uint16_t		lowest_mV;
+	int			(*powered_by_linreg)(void);
+	uint32_t		trg_mask;
+	uint32_t		bo_irq;
+	uint32_t		bo_enirq;
+	uint32_t		bo_offset_mask;
+	uint32_t		bo_offset_offset;
+};
+
+static const struct mxs_vddx_cfg mxs_vddio_cfg = {
+	.reg			= &(((struct mxs_power_regs *)MXS_POWER_BASE)->
+					hw_power_vddioctrl),
+#if defined(CONFIG_MX23)
+	.step_mV		= 25,
+#else
+	.step_mV		= 50,
+#endif
+	.lowest_mV		= 2800,
+	.powered_by_linreg	= mxs_get_vddio_power_source_off,
+	.trg_mask		= POWER_VDDIOCTRL_TRG_MASK,
+	.bo_irq			= POWER_CTRL_VDDIO_BO_IRQ,
+	.bo_enirq		= POWER_CTRL_ENIRQ_VDDIO_BO,
+	.bo_offset_mask		= POWER_VDDIOCTRL_BO_OFFSET_MASK,
+	.bo_offset_offset	= POWER_VDDIOCTRL_BO_OFFSET_OFFSET,
+};
+
+static const struct mxs_vddx_cfg mxs_vddd_cfg = {
+	.reg			= &(((struct mxs_power_regs *)MXS_POWER_BASE)->
+					hw_power_vdddctrl),
+	.step_mV		= 25,
+	.lowest_mV		= 800,
+	.powered_by_linreg	= mxs_get_vddd_power_source_off,
+	.trg_mask		= POWER_VDDDCTRL_TRG_MASK,
+	.bo_irq			= POWER_CTRL_VDDD_BO_IRQ,
+	.bo_enirq		= POWER_CTRL_ENIRQ_VDDD_BO,
+	.bo_offset_mask		= POWER_VDDDCTRL_BO_OFFSET_MASK,
+	.bo_offset_offset	= POWER_VDDDCTRL_BO_OFFSET_OFFSET,
+};
+
+#ifdef CONFIG_MX23
+static const struct mxs_vddx_cfg mxs_vddmem_cfg = {
+	.reg			= &(((struct mxs_power_regs *)MXS_POWER_BASE)->
+					hw_power_vddmemctrl),
+	.step_mV		= 50,
+	.lowest_mV		= 1700,
+	.powered_by_linreg	= NULL,
+	.trg_mask		= POWER_VDDMEMCTRL_TRG_MASK,
+	.bo_irq			= 0,
+	.bo_enirq		= 0,
+	.bo_offset_mask		= 0,
+	.bo_offset_offset	= 0,
+};
+#endif
+
+/**
+ * mxs_power_set_vddx() - Configure voltage on DC-DC converter rail
+ * @cfg:		Configuration data of the DC-DC converter rail
+ * @new_target:		New target voltage of the DC-DC converter rail
+ * @new_brownout:	New brownout trigger voltage
+ *
+ * This function configures the output voltage on the DC-DC converter rail.
+ * The rail is selected by the @cfg argument. The new voltage target is
+ * selected by the @new_target and the voltage is specified in mV. The
+ * new brownout value is selected by the @new_brownout argument and the
+ * value is also in mV.
+ */
+static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg,
+				uint32_t new_target, uint32_t new_brownout)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+	uint32_t cur_target, diff, bo_int = 0;
+	uint32_t powered_by_linreg = 0;
+	int adjust_up, tmp;
+
+	new_brownout = DIV_ROUND_CLOSEST(new_target - new_brownout,
+					 cfg->step_mV);
+
+	cur_target = readl(cfg->reg);
+	cur_target &= cfg->trg_mask;
+	cur_target *= cfg->step_mV;
+	cur_target += cfg->lowest_mV;
+
+	adjust_up = new_target > cur_target;
+	if (cfg->powered_by_linreg)
+		powered_by_linreg = cfg->powered_by_linreg();
+
+	if (adjust_up && cfg->bo_irq) {
+		if (powered_by_linreg) {
+			bo_int = readl(cfg->reg);
+			clrbits_le32(cfg->reg, cfg->bo_enirq);
+		}
+		setbits_le32(cfg->reg, cfg->bo_offset_mask);
+	}
+
+	do {
+		if (abs(new_target - cur_target) > 100) {
+			if (adjust_up)
+				diff = cur_target + 100;
+			else
+				diff = cur_target - 100;
+		} else {
+			diff = new_target;
+		}
+
+		diff -= cfg->lowest_mV;
+		diff /= cfg->step_mV;
+
+		clrsetbits_le32(cfg->reg, cfg->trg_mask, diff);
+
+		if (powered_by_linreg ||
+			(readl(&power_regs->hw_power_sts) &
+				POWER_STS_VDD5V_GT_VDDIO))
+			early_delay(500);
+		else {
+			for (;;) {
+				tmp = readl(&power_regs->hw_power_sts);
+				if (tmp & POWER_STS_DC_OK)
+					break;
+			}
+		}
+
+		cur_target = readl(cfg->reg);
+		cur_target &= cfg->trg_mask;
+		cur_target *= cfg->step_mV;
+		cur_target += cfg->lowest_mV;
+	} while (new_target > cur_target);
+
+	if (cfg->bo_irq) {
+		if (adjust_up && powered_by_linreg) {
+			writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr);
+			if (bo_int & cfg->bo_enirq)
+				setbits_le32(cfg->reg, cfg->bo_enirq);
+		}
+
+		clrsetbits_le32(cfg->reg, cfg->bo_offset_mask,
+				new_brownout << cfg->bo_offset_offset);
+	}
+}
+
+/**
+ * mxs_setup_batt_detect() - Start the battery voltage measurement logic
+ *
+ * This function starts and configures the LRADC block. This allows the
+ * power initialization code to measure battery voltage and based on this
+ * knowledge, decide whether to boot at all, boot from battery or boot
+ * from 5V input.
+ */
+static void mxs_setup_batt_detect(void)
+{
+	debug("SPL: Starting battery voltage measurement logic\n");
+
+	mxs_lradc_init();
+	mxs_lradc_enable_batt_measurement();
+	early_delay(10);
+}
+
+/**
+ * mxs_ungate_power() - Ungate the POWER block
+ *
+ * This function ungates clock to the power block. In case the power block
+ * was still gated at this point, it will not be possible to configure the
+ * block and therefore the power initialization would fail. This function
+ * is only needed on i.MX233, on i.MX28 the power block is always ungated.
+ */
+static void mxs_ungate_power(void)
+{
+#ifdef CONFIG_MX23
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	writel(POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr);
+#endif
+}
+
+/**
+ * mxs_power_init() - The power block init main function
+ *
+ * This function calls all the power block initialization functions in
+ * proper sequence to start the power block.
+ */
+void mxs_power_init(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Initialising Power Block\n");
+
+	mxs_ungate_power();
+
+	mxs_power_clock2xtal();
+	mxs_power_set_auto_restart();
+	mxs_power_set_linreg();
+	mxs_power_setup_5v_detect();
+
+	mxs_setup_batt_detect();
+
+	mxs_power_configure_power_source();
+	mxs_enable_output_rail_protection();
+
+	debug("SPL: Setting VDDIO to 3V3 (brownout @ 3v15)\n");
+	mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150);
+
+	debug("SPL: Setting VDDD to 1V55 (brownout @ 1v400)\n");
+	mxs_power_set_vddx(&mxs_vddd_cfg, 1550, 1400);
+#ifdef CONFIG_MX23
+	debug("SPL: Setting mx23 VDDMEM to 2V5 (brownout @ 1v7)\n");
+	mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700);
+#endif
+	writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+		POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
+		POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
+		POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+	writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
+
+	early_delay(1000);
+}
+
+#ifdef	CONFIG_SPL_MXS_PSWITCH_WAIT
+/**
+ * mxs_power_wait_pswitch() - Wait for power switch to be pressed
+ *
+ * This function waits until the power-switch was pressed to start booting
+ * the board.
+ */
+void mxs_power_wait_pswitch(void)
+{
+	struct mxs_power_regs *power_regs =
+		(struct mxs_power_regs *)MXS_POWER_BASE;
+
+	debug("SPL: Waiting for power switch input\n");
+	while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
+		;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/start.S b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/start.S
new file mode 100644
index 000000000..adec2c8ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/start.S
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Groger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Zupke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *  Copyright (c) 2010	Albert Aribaud <albert.u.boot@aribaud.net>
+ *
+ * Change to support call back into iMX28 bootrom
+ * Copyright (c) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <common.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+reset:
+	/*
+	 * If the CPU is configured in "Wait JTAG connection mode", the stack
+	 * pointer is not configured and is zero. This will cause crash when
+	 * trying to push data onto stack right below here. Load the SP and make
+	 * it point to the end of OCRAM if the SP is zero.
+	 */
+	cmp	sp, #0x00000000
+	ldreq	sp, =CONFIG_SYS_INIT_SP_ADDR
+
+	/*
+	 * Store all registers on old stack pointer, this will allow us later to
+	 * return to the BootROM and let the BootROM load U-Boot into RAM.
+	 *
+	 * WARNING: Register r0 and r1 are used by the BootROM to pass data
+	 *          to the called code. Register r0 will contain arbitrary
+	 *          data that are set in the BootStream. In case this code
+	 *          was started with CALL instruction, register r1 will contain
+	 *          pointer to the return value this function can then set.
+	 *          The code below MUST NOT CHANGE register r0 and r1 !
+	 */
+	push	{r0-r12,r14}
+
+	/* Save control register c1 */
+	mrc	p15, 0, r2, c1, c0, 0
+	push	{r2}
+
+	/* Set the cpu to SVC32 mode and store old CPSR register content. */
+	mrs	r2, cpsr
+	push	{r2}
+	bic	r2, r2, #0x1f
+	orr	r2, r2, #0xd3
+	msr	cpsr, r2
+
+	bl	board_init_ll
+
+	/* Restore BootROM's CPU mode (especially FIQ). */
+	pop	{r2}
+	msr	cpsr,r2
+
+	/*
+	 * Restore c1 register. Especially set exception vector location
+	 * back to BootROM space which is required by bootrom for USB boot.
+	 */
+	pop	{r2}
+	mcr	p15, 0, r2, c1, c0, 0
+
+	pop	{r0-r12,r14}
+
+	/*
+	 * In case this code was started by the CALL instruction, the register
+	 * r0 is examined by the BootROM after this code returns. The value in
+	 * r0 must be set to 0 to indicate successful return.
+	 */
+	mov r0, #0
+
+	bx	lr
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/timer.c b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/timer.c
new file mode 100644
index 000000000..3dff3d768
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/timer.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale i.MX28 timer driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/delay.h>
+
+/* Maximum fixed count */
+#if defined(CONFIG_MX23)
+#define TIMER_LOAD_VAL 0xffff
+#elif defined(CONFIG_MX28)
+#define TIMER_LOAD_VAL 0xffffffff
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp (gd->arch.tbl)
+#define lastdec (gd->arch.lastinc)
+
+/*
+ * This driver uses 1kHz clock source.
+ */
+#define	MXS_INCREMENTER_HZ		1000
+
+static inline unsigned long tick_to_time(unsigned long tick)
+{
+	return tick / (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
+}
+
+static inline unsigned long time_to_tick(unsigned long time)
+{
+	return time * (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
+}
+
+/* Calculate how many ticks happen in "us" microseconds */
+static inline unsigned long us_to_tick(unsigned long us)
+{
+	return (us * MXS_INCREMENTER_HZ) / 1000000;
+}
+
+int timer_init(void)
+{
+	struct mxs_timrot_regs *timrot_regs =
+		(struct mxs_timrot_regs *)MXS_TIMROT_BASE;
+
+	/* Reset Timers and Rotary Encoder module */
+	mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
+
+	/* Set fixed_count to 0 */
+#if defined(CONFIG_MX23)
+	writel(0, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
+	writel(0, &timrot_regs->hw_timrot_fixed_count0);
+#endif
+
+	/* Set UPDATE bit and 1Khz frequency */
+	writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
+		TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL,
+		&timrot_regs->hw_timrot_timctrl0);
+
+	/* Set fixed_count to maximal value */
+#if defined(CONFIG_MX23)
+	writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
+	writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+#endif
+
+	return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+	struct mxs_timrot_regs *timrot_regs =
+		(struct mxs_timrot_regs *)MXS_TIMROT_BASE;
+	uint32_t now;
+
+	/* Current tick value */
+#if defined(CONFIG_MX23)
+	/* Upper bits are the valid ones. */
+	now = readl(&timrot_regs->hw_timrot_timcount0) >>
+		TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET;
+#elif defined(CONFIG_MX28)
+	now = readl(&timrot_regs->hw_timrot_running_count0);
+#else
+#error "Don't know how to read timrot_regs"
+#endif
+
+	if (lastdec >= now) {
+		/*
+		 * normal mode (non roll)
+		 * move stamp forward with absolut diff ticks
+		 */
+		timestamp += (lastdec - now);
+	} else {
+		/* we have rollover of decrementer */
+		timestamp += (TIMER_LOAD_VAL - now) + lastdec;
+
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+ulong get_timer(ulong base)
+{
+	return tick_to_time(get_ticks()) - base;
+}
+
+/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
+#define	MXS_HW_DIGCTL_MICROSECONDS	0x8001c0c0
+
+void __udelay(unsigned long usec)
+{
+	uint32_t old, new, incr;
+	uint32_t counter = 0;
+
+	old = readl(MXS_HW_DIGCTL_MICROSECONDS);
+
+	while (counter < usec) {
+		new = readl(MXS_HW_DIGCTL_MICROSECONDS);
+
+		/* Check if the timer wrapped. */
+		if (new < old) {
+			incr = 0xffffffff - old;
+			incr += new;
+		} else {
+			incr = new - old;
+		}
+
+		/*
+		 * Check if we are close to the maximum time and the counter
+		 * would wrap if incremented. If that's the case, break out
+		 * from the loop as the requested delay time passed.
+		 */
+		if (counter + incr < counter)
+			break;
+
+		counter += incr;
+		old = new;
+	}
+}
+
+ulong get_tbclk(void)
+{
+	return MXS_INCREMENTER_HZ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
new file mode 100644
index 000000000..3a51879d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
@@ -0,0 +1,18 @@
+options {
+	driveTag = 0x00;
+	flags = 0x01;
+}
+
+sources {
+	u_boot_spl="spl/u-boot-spl.bin";
+	u_boot="u-boot.bin";
+}
+
+section (0) {
+	load u_boot_spl > 0x0000;
+	load ivt (entry = 0x0014) > 0x8000;
+	call 0x8000;
+
+	load u_boot > 0x40000100;
+	call 0x40000100;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd
new file mode 100644
index 000000000..c60615a45
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd
@@ -0,0 +1,14 @@
+sources {
+	u_boot_spl="spl/u-boot-spl.bin";
+	u_boot="u-boot.bin";
+}
+
+section (0) {
+	load u_boot_spl > 0x0000;
+	load ivt (entry = 0x0014) > 0x8000;
+	hab call 0x8000;
+
+	load u_boot > 0x40000100;
+	load ivt (entry = 0x40000100) > 0x8000;
+	hab call 0x8000;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
new file mode 100644
index 000000000..7e20448f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = IMAGE_TEXT_BASE;
+
+	. = ALIGN(4);
+	.text	:
+	{
+		*(.vectors)
+		arch/arm/cpu/arm926ejs/mxs/start.o	(.text*)
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+
+	.rel.dyn : {
+		__rel_dyn_start = .;
+		*(.rel*)
+		__rel_dyn_end = .;
+	}
+
+	.bss : {
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	}
+
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
+
+	.dynsym _image_binary_end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/Makefile b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/Makefile
new file mode 100644
index 000000000..b1b6b4028
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/Makefile
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	:= cpu.o \
+	   reset.o \
+	   timer.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y	+= spl.o
+obj-$(CONFIG_SPEAR600) += spear600.o
+obj-$(CONFIG_DDR_MT47H64M16) += spr600_mt47h64m16_3_333_cl5_psync.o
+obj-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_333_cl5_psync.o
+obj-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_37e_166_cl4_sync.o
+obj-$(CONFIG_DDR_MT47H128M8) += spr600_mt47h128m8_3_266_cl5_async.o
+else
+obj-y += spr_misc.o spr_lowlevel_init.o
+endif
+
+extra-$(CONFIG_SPL_BUILD) := start.o
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/cpu.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/cpu.c
new file mode 100644
index 000000000..210654107
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/cpu.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_misc.h>
+
+int arch_cpu_init(void)
+{
+	struct misc_regs *const misc_p =
+	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	u32 periph1_clken, periph_clk_cfg;
+
+	periph1_clken = readl(&misc_p->periph1_clken);
+
+#if defined(CONFIG_SPEAR3XX)
+	periph1_clken |= MISC_GPT2ENB;
+#elif defined(CONFIG_SPEAR600)
+	periph1_clken |= MISC_GPT3ENB;
+#endif
+
+#if defined(CONFIG_PL011_SERIAL)
+	periph1_clken |= MISC_UART0ENB;
+
+	periph_clk_cfg = readl(&misc_p->periph_clk_cfg);
+	periph_clk_cfg &= ~CONFIG_SPEAR_UARTCLKMSK;
+	periph_clk_cfg |= CONFIG_SPEAR_UART48M;
+	writel(periph_clk_cfg, &misc_p->periph_clk_cfg);
+#endif
+#if defined(CONFIG_ETH_DESIGNWARE)
+	periph1_clken |= MISC_ETHENB;
+#endif
+#if defined(CONFIG_DW_UDC)
+	periph1_clken |= MISC_USBDENB;
+#endif
+#if defined(CONFIG_SYS_I2C_DW)
+	periph1_clken |= MISC_I2CENB;
+#endif
+#if defined(CONFIG_ST_SMI)
+	periph1_clken |= MISC_SMIENB;
+#endif
+#if defined(CONFIG_NAND_FSMC)
+	periph1_clken |= MISC_FSMCENB;
+#endif
+#if defined(CONFIG_USB_EHCI_SPEAR)
+	periph1_clken |= PERIPH_USBH1 | PERIPH_USBH2;
+#endif
+#if defined(CONFIG_SPEAR_GPIO)
+	periph1_clken |= MISC_GPIO3ENB | MISC_GPIO4ENB;
+#endif
+#if defined(CONFIG_PL022_SPI)
+	periph1_clken |= MISC_SSP1ENB | MISC_SSP2ENB | MISC_SSP3ENB;
+#endif
+
+	writel(periph1_clken, &misc_p->periph1_clken);
+
+	return 0;
+}
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+#ifdef CONFIG_SPEAR300
+	printf("CPU:   SPEAr300\n");
+#elif defined(CONFIG_SPEAR310)
+	printf("CPU:   SPEAr310\n");
+#elif defined(CONFIG_SPEAR320)
+	printf("CPU:   SPEAr320\n");
+#elif defined(CONFIG_SPEAR600)
+	printf("CPU:   SPEAr600\n");
+#else
+#error CPU not supported in spear platform
+#endif
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_ECC_BCH) && defined(CONFIG_NAND_FSMC)
+static int do_switch_ecc(struct cmd_tbl *cmdtp, int flag, int argc,
+			 char *const argv[])
+{
+	if (argc != 2)
+		goto usage;
+
+	if (strncmp(argv[1], "hw", 2) == 0) {
+		/* 1-bit HW ECC */
+		printf("Switching to 1-bit HW ECC\n");
+		fsmc_nand_switch_ecc(1);
+	} else if (strncmp(argv[1], "bch4", 2) == 0) {
+		/* 4-bit SW ECC BCH4 */
+		printf("Switching to 4-bit SW ECC (BCH4)\n");
+		fsmc_nand_switch_ecc(4);
+	} else {
+		goto usage;
+	}
+
+	return 0;
+
+usage:
+	printf("Usage: nandecc %s\n", cmdtp->usage);
+	return 1;
+}
+
+U_BOOT_CMD(
+	nandecc, 2, 0,	do_switch_ecc,
+	"switch NAND ECC calculation algorithm",
+	"hw|bch4 - Switch between NAND hardware 1-bit HW and"
+	" 4-bit SW BCH\n"
+);
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/reset.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/reset.c
new file mode 100644
index 000000000..97a624e16
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/reset.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_syscntl.h>
+#include <linux/delay.h>
+
+void reset_cpu(void)
+{
+	struct syscntl_regs *syscntl_regs_p =
+	    (struct syscntl_regs *)CONFIG_SPEAR_SYSCNTLBASE;
+
+	printf("System is going to reboot ...\n");
+
+	/*
+	 * This 1 second delay will allow the above message
+	 * to be printed before reset
+	 */
+	udelay((1000 * 1000));
+
+	/* Going into slow mode before resetting SOC */
+	writel(0x02, &syscntl_regs_p->scctrl);
+
+	/*
+	 * Writing any value to the system status register will
+	 * reset the SoC
+	 */
+	writel(0x00, &syscntl_regs_p->scsysstat);
+
+	/* system will restart */
+	while (1)
+		;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spear600.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spear600.c
new file mode 100644
index 000000000..b31ede5eb
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spear600.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2009
+ * Viresh Kumar, ST Microelectronics, viresh.kumar@st.com
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ */
+
+#include <common.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_defs.h>
+
+void spear_late_init(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	writel(0x80000007, &misc_p->arb_icm_ml1);
+	writel(0x80000007, &misc_p->arb_icm_ml2);
+	writel(0x80000007, &misc_p->arb_icm_ml3);
+	writel(0x80000007, &misc_p->arb_icm_ml4);
+	writel(0x80000007, &misc_p->arb_icm_ml5);
+	writel(0x80000007, &misc_p->arb_icm_ml6);
+	writel(0x80000007, &misc_p->arb_icm_ml7);
+	writel(0x80000007, &misc_p->arb_icm_ml8);
+	writel(0x80000007, &misc_p->arb_icm_ml9);
+}
+
+static void sel_1v8(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	u32 ddr1v8, ddr2v5;
+
+	ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
+	ddr2v5 &= 0x8080ffc0;
+	ddr2v5 |= 0x78000003;
+	writel(ddr2v5, &misc_p->ddr_2v5_compensation);
+
+	ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
+	ddr1v8 &= 0x8080ffc0;
+	ddr1v8 |= 0x78000010;
+	writel(ddr1v8, &misc_p->ddr_1v8_compensation);
+
+	while (!(readl(&misc_p->ddr_1v8_compensation) & DDR_COMP_ACCURATE))
+		;
+}
+
+static void sel_2v5(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	u32 ddr1v8, ddr2v5;
+
+	ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
+	ddr1v8 &= 0x8080ffc0;
+	ddr1v8 |= 0x78000003;
+	writel(ddr1v8, &misc_p->ddr_1v8_compensation);
+
+	ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
+	ddr2v5 &= 0x8080ffc0;
+	ddr2v5 |= 0x78000010;
+	writel(ddr2v5, &misc_p->ddr_2v5_compensation);
+
+	while (!(readl(&misc_p->ddr_2v5_compensation) & DDR_COMP_ACCURATE))
+		;
+}
+
+/*
+ * plat_ddr_init:
+ */
+void plat_ddr_init(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	u32 ddrpad;
+	u32 core3v3, ddr1v8, ddr2v5;
+
+	/* DDR pad register configurations */
+	ddrpad = readl(&misc_p->ddr_pad);
+	ddrpad &= ~DDR_PAD_CNF_MSK;
+
+#if (CONFIG_DDR_HCLK)
+	ddrpad |= 0xEAAB;
+#elif (CONFIG_DDR_2HCLK)
+	ddrpad |= 0xEAAD;
+#elif (CONFIG_DDR_PLL2)
+	ddrpad |= 0xEAAD;
+#endif
+	writel(ddrpad, &misc_p->ddr_pad);
+
+	/* Compensation register configurations */
+	core3v3 = readl(&misc_p->core_3v3_compensation);
+	core3v3 &= 0x8080ffe0;
+	core3v3 |= 0x78000002;
+	writel(core3v3, &misc_p->core_3v3_compensation);
+
+	ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
+	ddr1v8 &= 0x8080ffc0;
+	ddr1v8 |= 0x78000004;
+	writel(ddr1v8, &misc_p->ddr_1v8_compensation);
+
+	ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
+	ddr2v5 &= 0x8080ffc0;
+	ddr2v5 |= 0x78000004;
+	writel(ddr2v5, &misc_p->ddr_2v5_compensation);
+
+	if ((readl(&misc_p->ddr_pad) & DDR_PAD_SW_CONF) == DDR_PAD_SW_CONF) {
+		/* Software memory configuration */
+		if (readl(&misc_p->ddr_pad) & DDR_PAD_SSTL_SEL)
+			sel_1v8();
+		else
+			sel_2v5();
+	} else {
+		/* Hardware memory configuration */
+		if (readl(&misc_p->ddr_pad) & DDR_PAD_DRAM_TYPE)
+			sel_1v8();
+		else
+			sel_2v5();
+	}
+}
+
+/*
+ * xxx_boot_selected:
+ *
+ * return true if the particular booting option is selected
+ * return false otherwise
+ */
+static u32 read_bootstrap(void)
+{
+	return (readl(CONFIG_SPEAR_BOOTSTRAPCFG) >> CONFIG_SPEAR_BOOTSTRAPSHFT)
+		& CONFIG_SPEAR_BOOTSTRAPMASK;
+}
+
+int snor_boot_selected(void)
+{
+	u32 bootstrap = read_bootstrap();
+
+	if (SNOR_BOOT_SUPPORTED) {
+		/* Check whether SNOR boot is selected */
+		if ((bootstrap & CONFIG_SPEAR_ONLYSNORBOOT) ==
+			CONFIG_SPEAR_ONLYSNORBOOT)
+			return true;
+
+		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
+			CONFIG_SPEAR_NORNAND8BOOT)
+			return true;
+
+		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
+			CONFIG_SPEAR_NORNAND16BOOT)
+			return true;
+	}
+
+	return false;
+}
+
+int nand_boot_selected(void)
+{
+	u32 bootstrap = read_bootstrap();
+
+	if (NAND_BOOT_SUPPORTED) {
+		/* Check whether NAND boot is selected */
+		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
+			CONFIG_SPEAR_NORNAND8BOOT)
+			return true;
+
+		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
+			CONFIG_SPEAR_NORNAND16BOOT)
+			return true;
+	}
+
+	return false;
+}
+
+int pnor_boot_selected(void)
+{
+	/* Parallel NOR boot is not selected in any SPEAr600 revision */
+	return false;
+}
+
+int usb_boot_selected(void)
+{
+	u32 bootstrap = read_bootstrap();
+
+	if (USB_BOOT_SUPPORTED) {
+		/* Check whether USB boot is selected */
+		if (!(bootstrap & CONFIG_SPEAR_USBBOOT))
+			return true;
+	}
+
+	return false;
+}
+
+int tftp_boot_selected(void)
+{
+	/* TFTP boot is not selected in any SPEAr600 revision */
+	return false;
+}
+
+int uart_boot_selected(void)
+{
+	/* UART boot is not selected in any SPEAr600 revision */
+	return false;
+}
+
+int spi_boot_selected(void)
+{
+	/* SPI boot is not selected in any SPEAr600 revision */
+	return false;
+}
+
+int i2c_boot_selected(void)
+{
+	/* I2C boot is not selected in any SPEAr600 revision */
+	return false;
+}
+
+int mmc_boot_selected(void)
+{
+	return false;
+}
+
+void plat_late_init(void)
+{
+	spear_late_init();
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spl.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spl.c
new file mode 100644
index 000000000..b5b9945a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spl.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <spl.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/ptrace.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_defs.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_syscntl.h>
+#include <linux/mtd/st_smi.h>
+
+/* Reserve some space to store the BootROM's stack pointer during SPL operation.
+ * The BSS cannot be used for this purpose because it will be zeroed after
+ * having stored the pointer, so force the location to the data section.
+ */
+u32 bootrom_stash_sp __section(".data");
+
+static void ddr_clock_init(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	u32 clkenb, ddrpll;
+
+	clkenb = readl(&misc_p->periph1_clken);
+	clkenb &= ~PERIPH_MPMCMSK;
+	clkenb |= PERIPH_MPMC_WE;
+
+	/* Intentionally done twice */
+	writel(clkenb, &misc_p->periph1_clken);
+	writel(clkenb, &misc_p->periph1_clken);
+
+	ddrpll = readl(&misc_p->pll_ctr_reg);
+	ddrpll &= ~MEM_CLK_SEL_MSK;
+#if (CONFIG_DDR_HCLK)
+	ddrpll |= MEM_CLK_HCLK;
+#elif (CONFIG_DDR_2HCLK)
+	ddrpll |= MEM_CLK_2HCLK;
+#elif (CONFIG_DDR_PLL2)
+	ddrpll |= MEM_CLK_PLL2;
+#else
+#error "please define one of CONFIG_DDR_(HCLK|2HCLK|PLL2)"
+#endif
+	writel(ddrpll, &misc_p->pll_ctr_reg);
+
+	writel(readl(&misc_p->periph1_clken) | PERIPH_MPMC_EN,
+			&misc_p->periph1_clken);
+}
+
+static void mpmc_init_values(void)
+{
+	u32 i;
+	u32 *mpmc_reg_p = (u32 *)CONFIG_SPEAR_MPMCBASE;
+	u32 *mpmc_val_p = &mpmc_conf_vals[0];
+
+	for (i = 0; i < CONFIG_SPEAR_MPMCREGS; i++, mpmc_reg_p++, mpmc_val_p++)
+		writel(*mpmc_val_p, mpmc_reg_p);
+
+	mpmc_reg_p = (u32 *)CONFIG_SPEAR_MPMCBASE;
+
+	/*
+	 * MPMC controller start
+	 * MPMC waiting for DLLLOCKREG high
+	 */
+	writel(0x01000100, &mpmc_reg_p[7]);
+
+	while (!(readl(&mpmc_reg_p[3]) & 0x10000))
+		;
+}
+
+static void mpmc_init(void)
+{
+	/* Clock related settings for DDR */
+	ddr_clock_init();
+
+	/*
+	 * DDR pad register bits are different for different SoCs
+	 * Compensation values are also handled separately
+	 */
+	plat_ddr_init();
+
+	/* Initialize mpmc register values */
+	mpmc_init_values();
+}
+
+static void pll_init(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	/* Initialize PLLs */
+	writel(FREQ_332, &misc_p->pll1_frq);
+	writel(0x1C0A, &misc_p->pll1_cntl);
+	writel(0x1C0E, &misc_p->pll1_cntl);
+	writel(0x1C06, &misc_p->pll1_cntl);
+	writel(0x1C0E, &misc_p->pll1_cntl);
+
+	writel(FREQ_332, &misc_p->pll2_frq);
+	writel(0x1C0A, &misc_p->pll2_cntl);
+	writel(0x1C0E, &misc_p->pll2_cntl);
+	writel(0x1C06, &misc_p->pll2_cntl);
+	writel(0x1C0E, &misc_p->pll2_cntl);
+
+	/* wait for pll locks */
+	while (!(readl(&misc_p->pll1_cntl) & 0x1))
+		;
+	while (!(readl(&misc_p->pll2_cntl) & 0x1))
+		;
+}
+
+static void mac_init(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	writel(readl(&misc_p->periph1_clken) & (~PERIPH_GMAC),
+			&misc_p->periph1_clken);
+
+	writel(SYNTH23, &misc_p->gmac_synth_clk);
+
+	switch (get_socrev()) {
+	case SOC_SPEAR600_AA:
+	case SOC_SPEAR600_AB:
+	case SOC_SPEAR600_BA:
+	case SOC_SPEAR600_BB:
+	case SOC_SPEAR600_BC:
+	case SOC_SPEAR600_BD:
+		writel(0x0, &misc_p->gmac_ctr_reg);
+		break;
+
+	case SOC_SPEAR300:
+	case SOC_SPEAR310:
+	case SOC_SPEAR320:
+		writel(0x4, &misc_p->gmac_ctr_reg);
+		break;
+	}
+
+	writel(readl(&misc_p->periph1_clken) | PERIPH_GMAC,
+			&misc_p->periph1_clken);
+
+	writel(readl(&misc_p->periph1_rst) | PERIPH_GMAC,
+			&misc_p->periph1_rst);
+	writel(readl(&misc_p->periph1_rst) & (~PERIPH_GMAC),
+			&misc_p->periph1_rst);
+}
+
+static void sys_init(void)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	struct syscntl_regs *syscntl_p =
+		(struct syscntl_regs *)CONFIG_SPEAR_SYSCNTLBASE;
+
+	/* Set system state to SLOW */
+	writel(SLOW, &syscntl_p->scctrl);
+	writel(PLL_TIM << 3, &syscntl_p->scpllctrl);
+
+	/* Initialize PLLs */
+	pll_init();
+
+	/*
+	 * Ethernet configuration
+	 * To be done only if the tftp boot is not selected already
+	 * Boot code ensures the correct configuration in tftp booting
+	 */
+	if (!tftp_boot_selected())
+		mac_init();
+
+	writel(RTC_DISABLE | PLLTIMEEN, &misc_p->periph_clk_cfg);
+	writel(0x555, &misc_p->amba_clk_cfg);
+
+	writel(NORMAL, &syscntl_p->scctrl);
+
+	/* Wait for system to switch to normal mode */
+	while (((readl(&syscntl_p->scctrl) >> MODE_SHIFT) & MODE_MASK)
+		!= NORMAL)
+		;
+}
+
+/*
+ * get_socrev
+ *
+ * Get SoC Revision.
+ * @return SOC_SPEARXXX
+ */
+int get_socrev(void)
+{
+#if defined(CONFIG_SPEAR600)
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	u32 soc_id = readl(&misc_p->soc_core_id);
+	u32 pri_socid = (soc_id >> SOC_PRI_SHFT) & 0xFF;
+	u32 sec_socid = (soc_id >> SOC_SEC_SHFT) & 0xFF;
+
+	if ((pri_socid == 'B') && (sec_socid == 'B'))
+		return SOC_SPEAR600_BB;
+	else if ((pri_socid == 'B') && (sec_socid == 'C'))
+		return SOC_SPEAR600_BC;
+	else if ((pri_socid == 'B') && (sec_socid == 'D'))
+		return SOC_SPEAR600_BD;
+	else if (soc_id == 0)
+		return SOC_SPEAR600_BA;
+	else
+		return SOC_SPEAR_NA;
+#elif defined(CONFIG_SPEAR300)
+	return SOC_SPEAR300;
+#elif defined(CONFIG_SPEAR310)
+	return SOC_SPEAR310;
+#elif defined(CONFIG_SPEAR320)
+	return SOC_SPEAR320;
+#endif
+}
+
+/*
+ * SNOR (Serial NOR flash) related functions
+ */
+static void snor_init(void)
+{
+	struct smi_regs *const smicntl =
+		(struct smi_regs * const)CONFIG_SYS_SMI_BASE;
+
+	/* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */
+	writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4,
+	       &smicntl->smi_cr1);
+}
+
+u32 spl_boot_device(void)
+{
+	u32 mode = 0;
+
+	if (usb_boot_selected()) {
+		mode = BOOT_DEVICE_BOOTROM;
+	} else if (snor_boot_selected()) {
+		/* SNOR-SMI initialization */
+		snor_init();
+
+		mode = BOOT_DEVICE_NOR;
+	}
+
+	return mode;
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+
+	/*
+	 * If the main boot device (eg. NOR) is empty, try to jump back into the
+	 * BootROM for USB boot process.
+	 */
+	if (USB_BOOT_SUPPORTED)
+		spl_boot_list[1] = BOOT_DEVICE_BOOTROM;
+}
+
+void board_init_f(ulong dummy)
+{
+	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	/* Initialize PLLs */
+	sys_init();
+
+	preloader_console_init();
+	arch_cpu_init();
+
+	/* Enable IPs (release reset) */
+	writel(PERIPH_RST_ALL, &misc_p->periph1_rst);
+
+	/* Initialize MPMC */
+	puts("Configure DDR\n");
+	mpmc_init();
+	spear_late_init();
+}
+
+/*
+ * In a few cases (Ethernet, UART or USB boot, we might want to go back into the
+ * BootROM code right after having initialized a few components like the DRAM).
+ * The following function is called from SPL common code (board_init_r).
+ */
+int board_return_to_bootrom(struct spl_image_info *spl_image,
+			    struct spl_boot_device *bootdev)
+{
+	/*
+	 * Retrieve the BootROM's stack pointer and jump back to the start of
+	 * the SPL, where we can easily branch back into the BootROM. Don't do
+	 * it right here because SPL might be compiled in Thumb mode while the
+	 * BootROM expects ARM mode.
+	 */
+	asm volatile ("ldr r0, =bootrom_stash_sp;"
+		      "ldr r0, [r0];"
+		      "mov sp, r0;"
+#if defined(CONFIG_SPL_SYS_THUMB_BUILD)
+		      "blx back_to_bootrom;"
+#else
+		      "bl back_to_bootrom;"
+#endif
+		      );
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
new file mode 100644
index 000000000..79ab2a70d
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ */
+
+#include <common.h>
+
+#if (CONFIG_DDR_PLL2)
+
+const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
+	0x00000001,
+	0x00000000,
+	0x01000000,
+	0x00000101,
+	0x00000001,
+	0x01000000,
+	0x00010001,
+	0x00000100,
+	0x00010001,
+	0x00000003,
+	0x01000201,
+	0x06000202,
+	0x06060106,
+	0x03050502,
+	0x03040404,
+	0x02020503,
+	0x02010106,
+	0x03000404,
+	0x02030202,
+	0x03000204,
+	0x0707073f,
+	0x07070707,
+	0x06060607,
+	0x06060606,
+	0x05050506,
+	0x05050505,
+	0x04040405,
+	0x04040404,
+	0x03030304,
+	0x03030303,
+	0x02020203,
+	0x02020202,
+	0x01010102,
+	0x01010101,
+	0x08080a01,
+	0x0000023f,
+	0x00040800,
+	0x00000000,
+	0x00000f02,
+	0x00001b1b,
+	0x7f000000,
+	0x005f0000,
+	0x1c040b6a,
+	0x00640064,
+	0x00640064,
+	0x00640064,
+	0x00000064,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x000007ff,
+	0x00000000,
+	0x47ec00c8,
+	0x00c8001f,
+	0x00000000,
+	0x0000cd98,
+	0x00000000,
+	0x03030100,
+	0x03030303,
+	0x03030303,
+	0x03030303,
+	0x00270000,
+	0x00250027,
+	0x00300000,
+	0x008900b7,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000
+};
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c
new file mode 100644
index 000000000..121b63607
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ */
+
+#include <common.h>
+
+#if (CONFIG_DDR_PLL2 || CONFIG_DDR_2HCLK)
+
+const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
+#if (CONFIG_DDR_PLL2)
+	0x00000001,
+	0x00000000,
+#elif (CONFIG_DDR_2HCLK)
+	0x02020201,
+	0x02020202,
+#endif
+	0x01000000,
+	0x00000101,
+	0x00000101,
+	0x01000000,
+	0x00010001,
+	0x00000100,
+	0x01010001,
+	0x00000201,
+	0x01000101,
+	0x06000002,
+	0x06060106,
+	0x03050502,
+	0x03040404,
+	0x02020503,
+	0x02010106,
+	0x03000405,
+	0x03040202,
+	0x04000305,
+	0x0707073f,
+	0x07070707,
+	0x06060607,
+	0x06060606,
+	0x05050506,
+	0x05050505,
+	0x04040405,
+	0x04040404,
+	0x03030304,
+	0x03030303,
+	0x02020203,
+	0x02020202,
+	0x01010102,
+	0x01010101,
+	0x0a0a0a01,
+	0x0000023f,
+	0x00050a00,
+	0x11000000,
+	0x00001302,
+	0x00000A0A,
+	0x72000000,
+	0x00550000,
+	0x2b050e86,
+	0x00640064,
+	0x00640064,
+	0x00640064,
+	0x00000064,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00000a24,
+	0x43C20000,
+	0x5b1c00c8,
+	0x00c8002e,
+	0x00000000,
+	0x0001046b,
+	0x00000000,
+	0x03030100,
+	0x03030303,
+	0x03030303,
+	0x03030303,
+	0x00210000,
+	0x00010021,
+	0x00200000,
+	0x006c0090,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000
+};
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
new file mode 100644
index 000000000..64c8bab9b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ */
+
+#include <common.h>
+
+#if (CONFIG_DDR_HCLK)
+
+const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
+	0x03030301,
+	0x03030303,
+	0x01000000,
+	0x00000101,
+	0x00000001,
+	0x01000000,
+	0x00010001,
+	0x00000100,
+	0x00010001,
+	0x00000003,
+	0x01000201,
+	0x06000202,
+	0x06060106,
+	0x03050502,
+	0x03040404,
+	0x02020503,
+	0x02010106,
+	0x03000404,
+	0x02020202,
+	0x03000203,
+	0x0707073f,
+	0x07070707,
+	0x06060607,
+	0x06060606,
+	0x05050506,
+	0x05050505,
+	0x04040405,
+	0x04040404,
+	0x03030304,
+	0x03030303,
+	0x02020203,
+	0x02020202,
+	0x01010102,
+	0x01010101,
+	0x08080a01,
+	0x0000023f,
+	0x00030600,
+	0x00000000,
+	0x00000a02,
+	0x00001c1c,
+	0x7f000000,
+	0x005f0000,
+	0x12030743,
+	0x00640064,
+	0x00640064,
+	0x00640064,
+	0x00000064,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x0000050e,
+	0x00000000,
+	0x2d8900c8,
+	0x00c80014,
+	0x00000000,
+	0x00008236,
+	0x00000000,
+	0x03030100,
+	0x03030303,
+	0x03030303,
+	0x03030303,
+	0x00400000,
+	0x003a0040,
+	0x00680000,
+	0x00d80120,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000
+};
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
new file mode 100644
index 000000000..87654663f
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ */
+
+#include <common.h>
+
+#if (CONFIG_DDR_PLL2 || CONFIG_DDR_2HCLK)
+
+const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
+#if (CONFIG_DDR_PLL2)
+	0x00000001,
+	0x00000000,
+#elif (CONFIG_DDR_2HCLK)
+	0x02020201,
+	0x02020202,
+#endif
+	0x01000000,
+	0x00000101,
+	0x00000101,
+	0x01000000,
+	0x00010001,
+	0x00000100,
+	0x01010001,
+	0x00000201,
+	0x01000101,
+	0x06000002,
+	0x06060106,
+	0x03050502,
+	0x03040404,
+	0x02020503,
+#ifdef CONFIG_X600
+	0x02030206,
+#else
+	0x02010106,
+#endif
+	0x03000405,
+	0x03040202,
+	0x04000305,
+	0x0707073f,
+	0x07070707,
+	0x06060607,
+	0x06060606,
+	0x05050506,
+	0x05050505,
+	0x04040405,
+	0x04040404,
+	0x03030304,
+	0x03030303,
+	0x02020203,
+	0x02020202,
+	0x01010102,
+	0x01010101,
+	0x0a0a0a01,
+	0x0000023f,
+	0x00050a00,
+	0x11000000,
+	0x00001302,
+	0x00000A0A,
+#ifdef CONFIG_X600
+	0x7f000000,
+	0x005c0000,
+#else
+	0x72000000,
+	0x00550000,
+#endif
+	0x2b050e86,
+	0x00640064,
+	0x00640064,
+	0x00640064,
+	0x00000064,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00200020,
+	0x00000a24,
+	0x43C20000,
+	0x5b1c00c8,
+	0x00c8002e,
+	0x00000000,
+	0x0001046b,
+	0x00000000,
+	0x03030100,
+	0x03030303,
+	0x03030303,
+	0x03030303,
+	0x00210000,
+	0x00010021,
+	0x00200000,
+	0x006c0090,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x003fffff,
+	0x003fffff,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000
+};
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr_lowlevel_init.S b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr_lowlevel_init.S
new file mode 100644
index 000000000..417e87a7b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr_lowlevel_init.S
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ */
+
+#include <config.h>
+
+/*
+ * platform specific initializations are already done in Xloader
+ * Initializations already done include
+ * DDR, PLLs, IP's clock enable and reset release etc
+ */
+.globl lowlevel_init
+lowlevel_init:
+	mov	pc, lr
+
+/* void setfreq(unsigned int device, unsigned int frequency) */
+.global setfreq
+setfreq:
+	stmfd 	sp!,{r14}
+	stmfd 	sp!,{r0-r12}
+
+	mov  	r8,sp
+	ldr 	sp,SRAM_STACK_V
+
+	/* Saving the function arguements for later use */
+	mov  	r4,r0
+	mov  	r5,r1
+
+	/* Putting DDR into self refresh */
+	ldr 	r0,DDR_07_V
+	ldr	r1,[r0]
+	ldr	r2,DDR_ACTIVE_V
+	bic	r1, r1, r2
+	str	r1,[r0]
+	ldr 	r0,DDR_57_V
+	ldr	r1,[r0]
+	ldr	r2,CYCLES_MASK_V
+	bic	r1, r1, r2
+	ldr	r2,REFRESH_CYCLES_V
+	orr	r1, r1, r2, lsl #16
+	str	r1,[r0]
+	ldr 	r0,DDR_07_V
+	ldr	r1,[r0]
+	ldr	r2,SREFRESH_MASK_V
+	orr	r1, r1, r2
+	str	r1,[r0]
+
+	/* flush pipeline */
+	b	flush
+	.align 5
+flush:
+	/* Delay to ensure self refresh mode */
+	ldr	r0,SREFRESH_DELAY_V
+delay:
+	sub	r0,r0,#1
+	cmp	r0,#0
+	bne	delay
+
+	/* Putting system in slow mode */
+	ldr	r0,SCCTRL_V
+	mov	r1,#2
+	str	r1,[r0]
+
+	/* Changing PLL(1/2) frequency */
+	mov	r0,r4
+	mov	r1,r5
+
+	cmp	r4,#0
+	beq	pll1_freq
+
+	/* Change PLL2 (DDR frequency) */
+	ldr	r6,PLL2_FREQ_V
+	ldr	r7,PLL2_CNTL_V
+	b	pll2_freq
+
+pll1_freq:
+	/* Change PLL1 (CPU frequency) */
+	ldr	r6,PLL1_FREQ_V
+	ldr	r7,PLL1_CNTL_V
+
+pll2_freq:
+	mov	r0,r6
+	ldr	r1,[r0]
+	ldr	r2,PLLFREQ_MASK_V
+	bic	r1,r1,r2
+	mov	r2,r5,lsr#1
+	orr	r1,r1,r2,lsl#24
+	str	r1,[r0]
+
+	mov	r0,r7
+	ldr	r1,P1C0A_V
+	str	r1,[r0]
+	ldr	r1,P1C0E_V
+	str	r1,[r0]
+	ldr	r1,P1C06_V
+	str	r1,[r0]
+	ldr	r1,P1C0E_V
+	str	r1,[r0]
+
+lock:
+	ldr	r1,[r0]
+	and	r1,r1,#1
+	cmp	r1,#0
+	beq	lock
+
+	/* Putting system back to normal mode */
+	ldr	r0,SCCTRL_V
+	mov	r1,#4
+	str	r1,[r0]
+
+	/* Putting DDR back to normal */
+	ldr	r0,DDR_07_V
+	ldr	r1,[R0]
+	ldr	r2,SREFRESH_MASK_V
+	bic	r1, r1, r2
+	str	r1,[r0]
+	ldr	r2,DDR_ACTIVE_V
+	orr	r1, r1, r2
+	str	r1,[r0]
+
+	/* Delay to ensure self refresh mode */
+	ldr	r0,SREFRESH_DELAY_V
+1:
+	sub	r0,r0,#1
+	cmp	r0,#0
+	bne	1b
+
+	mov	sp,r8
+	/* Resuming back to code */
+	ldmia	sp!,{r0-r12}
+	ldmia	sp!,{pc}
+
+SCCTRL_V:
+	.word 0xfca00000
+PLL1_FREQ_V:
+	.word 0xfca8000C
+PLL1_CNTL_V:
+	.word 0xfca80008
+PLL2_FREQ_V:
+	.word 0xfca80018
+PLL2_CNTL_V:
+	.word 0xfca80014
+PLLFREQ_MASK_V:
+	.word 0xff000000
+P1C0A_V:
+	.word 0x1C0A
+P1C0E_V:
+	.word 0x1C0E
+P1C06_V:
+	.word 0x1C06
+
+SREFRESH_DELAY_V:
+	.word 0x9999
+SRAM_STACK_V:
+	.word 0xD2800600
+DDR_07_V:
+	.word 0xfc60001c
+DDR_ACTIVE_V:
+	.word 0x01000000
+DDR_57_V:
+	.word 0xfc6000e4
+CYCLES_MASK_V:
+	.word 0xffff0000
+REFRESH_CYCLES_V:
+	.word 0xf0f0
+SREFRESH_MASK_V:
+	.word 0x00010000
+
+.global setfreq_sz
+setfreq_sz:
+	.word setfreq_sz - setfreq
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr_misc.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr_misc.c
new file mode 100644
index 000000000..044052b32
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/spr_misc.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <env.h>
+#include <i2c.h>
+#include <init.h>
+#include <net.h>
+#include <asm/global_data.h>
+#include <linux/mtd/st_smi.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_emi.h>
+#include <asm/arch/spr_defs.h>
+
+#define CPU		0
+#define DDR		1
+#define SRAM_REL	0xD2801000
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET)
+static int i2c_read_mac(uchar *buffer);
+#endif
+
+int dram_init(void)
+{
+	/* Store complete RAM size and return */
+	gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+int board_early_init_f()
+{
+#if defined(CONFIG_ST_SMI)
+	smi_init();
+#endif
+	return 0;
+}
+int misc_init_r(void)
+{
+#if defined(CONFIG_CMD_NET)
+	uchar mac_id[6];
+
+	if (!eth_env_get_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
+		eth_env_set_enetaddr("ethaddr", mac_id);
+#endif
+	env_set("verify", "n");
+
+#if defined(CONFIG_SPEAR_USBTTY)
+	env_set("stdin", "usbtty");
+	env_set("stdout", "usbtty");
+	env_set("stderr", "usbtty");
+
+#ifndef CONFIG_SYS_NO_DCACHE
+	dcache_enable();
+#endif
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_SPEAR_EMI
+struct cust_emi_para {
+	unsigned int tap;
+	unsigned int tsdp;
+	unsigned int tdpw;
+	unsigned int tdpr;
+	unsigned int tdcs;
+};
+
+/* EMI timing setting of m28w640hc of linux kernel */
+const struct cust_emi_para emi_timing_m28w640hc = {
+	.tap = 0x10,
+	.tsdp = 0x05,
+	.tdpw = 0x0a,
+	.tdpr = 0x0a,
+	.tdcs = 0x05,
+};
+
+/* EMI timing setting of bootrom */
+const struct cust_emi_para emi_timing_bootrom = {
+	.tap = 0xf,
+	.tsdp = 0x0,
+	.tdpw = 0xff,
+	.tdpr = 0x111,
+	.tdcs = 0x02,
+};
+
+void spear_emi_init(void)
+{
+	const struct cust_emi_para *p = &emi_timing_m28w640hc;
+	struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
+	unsigned int cs;
+	unsigned int val, tmp;
+
+	val = readl(CONFIG_SPEAR_RASBASE);
+
+	if (val & EMI_ACKMSK)
+		tmp = 0x3f;
+	else
+		tmp = 0x0;
+
+	writel(tmp, &emi_regs_p->ack);
+
+	for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
+		writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
+		writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
+		writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
+		writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
+		writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
+		writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
+		       &emi_regs_p->bank_regs[cs].control);
+	}
+}
+#endif
+
+int spear_board_init(ulong mach_type)
+{
+	gd->bd->bi_arch_number = mach_type;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
+
+#ifdef CONFIG_SPEAR_EMI
+	spear_emi_init();
+#endif
+	return 0;
+}
+
+#if defined(CONFIG_CMD_NET)
+static int i2c_read_mac(uchar *buffer)
+{
+	u8 buf[2];
+
+	i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	/* Check if mac in i2c memory is valid */
+	if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
+		/* Valid mac address is saved in i2c eeprom */
+		i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
+		return 0;
+	}
+
+	return -1;
+}
+
+static int write_mac(uchar *mac)
+{
+	u8 buf[2];
+
+	buf[0] = (u8)MAGIC_BYTE0;
+	buf[1] = (u8)MAGIC_BYTE1;
+	i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	buf[0] = (u8)~MAGIC_BYTE0;
+	buf[1] = (u8)~MAGIC_BYTE1;
+
+	i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	/* check if valid MAC address is saved in I2C EEPROM or not? */
+	if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
+		i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
+		puts("I2C EEPROM written with mac address \n");
+		return 0;
+	}
+
+	puts("I2C EEPROM writing failed\n");
+	return -1;
+}
+#endif
+
+int do_chip_config(struct cmd_tbl *cmdtp, int flag, int argc,
+		   char *const argv[])
+{
+	void (*sram_setfreq) (unsigned int, unsigned int);
+	unsigned int frequency;
+#if defined(CONFIG_CMD_NET)
+	unsigned char mac[6];
+#endif
+
+	if ((argc > 3) || (argc < 2))
+		return cmd_usage(cmdtp);
+
+	if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
+
+		frequency = simple_strtoul(argv[2], NULL, 0);
+
+		if (frequency > 333) {
+			printf("Frequency is limited to 333MHz\n");
+			return 1;
+		}
+
+		sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
+
+		if (!strcmp(argv[1], "cpufreq")) {
+			sram_setfreq(CPU, frequency);
+			printf("CPU frequency changed to %u\n", frequency);
+		} else {
+			sram_setfreq(DDR, frequency);
+			printf("DDR frequency changed to %u\n", frequency);
+		}
+
+		return 0;
+
+#if defined(CONFIG_CMD_NET)
+	} else if (!strcmp(argv[1], "ethaddr")) {
+
+		u32 reg;
+		char *e, *s = argv[2];
+		for (reg = 0; reg < 6; ++reg) {
+			mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+		write_mac(mac);
+
+		return 0;
+#endif
+	} else if (!strcmp(argv[1], "print")) {
+#if defined(CONFIG_CMD_NET)
+		if (!i2c_read_mac(mac)) {
+			printf("Ethaddr (from i2c mem) = %pM\n", mac);
+		} else {
+			printf("Ethaddr (from i2c mem) = Not set\n");
+		}
+#endif
+		return 0;
+	}
+
+	return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
+	   "configure chip",
+	   "chip_config cpufreq/ddrfreq frequency\n"
+#if defined(CONFIG_CMD_NET)
+	   "chip_config ethaddr XX:XX:XX:XX:XX:XX\n"
+#endif
+	   "chip_config print");
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/start.S b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/start.S
new file mode 100644
index 000000000..9ac96291b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/start.S
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ */
+
+
+#include <config.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * The BootROM already initialized its own stack in the [0-0xb00] reserved
+ * range of the SRAM. The SPL (in _main) will update the stack pointer to
+ * its own SRAM area (right before the gd section).
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+	.globl	back_to_bootrom
+
+reset:
+	/*
+	* SPL has to return back to BootROM in a few cases (eg. Ethernet boot,
+	* UART boot, USB boot): save registers in BootROM's stack and then the
+	* BootROM's stack pointer in the SPL's data section.
+	*/
+	push	{r0-r12,lr}
+	ldr	r0, =bootrom_stash_sp
+	str	sp, [r0]
+
+	/*
+	 * Flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* Flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* Flush v4 TLB */
+
+	/*
+	 * Enable instruction cache
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
+	mcr	p15, 0, r0, c1, c0, 0
+
+	/*
+	 * Go setup Memory and board specific bits prior to relocation.
+	 * This call is not supposed to return.
+	 */
+	b	_main	/* _main will call board_init_f */
+
+back_to_bootrom:
+	pop	{r0-r12,pc}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/timer.c b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/timer.c
new file mode 100644
index 000000000..b42baa715
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/timer.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_gpt.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/ptrace.h>
+#include <linux/delay.h>
+
+#define GPT_RESOLUTION	(CONFIG_SPEAR_HZ_CLOCK / CONFIG_SPEAR_HZ)
+#define READ_TIMER()	(readl(&gpt_regs_p->count) & GPT_FREE_RUNNING)
+
+static struct gpt_regs *const gpt_regs_p =
+    (struct gpt_regs *)CONFIG_SPEAR_TIMERBASE;
+
+static struct misc_regs *const misc_regs_p =
+    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static ulong get_timer_masked(void);
+
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
+
+int timer_init(void)
+{
+	u32 synth;
+
+	/* Prescaler setting */
+#if defined(CONFIG_SPEAR3XX)
+	writel(MISC_PRSC_CFG, &misc_regs_p->prsc2_clk_cfg);
+	synth = MISC_GPT4SYNTH;
+#elif defined(CONFIG_SPEAR600)
+	writel(MISC_PRSC_CFG, &misc_regs_p->prsc1_clk_cfg);
+	synth = MISC_GPT3SYNTH;
+#else
+# error Incorrect config. Can only be SPEAR{600|300|310|320}
+#endif
+
+	writel(readl(&misc_regs_p->periph_clk_cfg) | synth,
+	       &misc_regs_p->periph_clk_cfg);
+
+	/* disable timers */
+	writel(GPT_PRESCALER_1 | GPT_MODE_AUTO_RELOAD, &gpt_regs_p->control);
+
+	/* load value for free running */
+	writel(GPT_FREE_RUNNING, &gpt_regs_p->compare);
+
+	/* auto reload, start timer */
+	writel(readl(&gpt_regs_p->control) | GPT_ENABLE, &gpt_regs_p->control);
+
+	/* Reset the timer */
+	lastdec = READ_TIMER();
+	timestamp = 0;
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer(ulong base)
+{
+	return (get_timer_masked() / GPT_RESOLUTION) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_timer_masked();
+	ulong tenudelcnt = CONFIG_SPEAR_HZ_CLOCK / (1000 * 100);
+	ulong rndoff;
+
+	rndoff = (usec % 10) ? 1 : 0;
+
+	/* tenudelcnt timer tick gives 10 microsecconds delay */
+	tmo = ((usec / 10) + rndoff) * tenudelcnt;
+
+	while ((ulong) (get_timer_masked() - start) < tmo)
+		;
+}
+
+static ulong get_timer_masked(void)
+{
+	ulong now = READ_TIMER();
+
+	if (now >= lastdec) {
+		/* normal mode */
+		timestamp += now - lastdec;
+	} else {
+		/* we have an overflow ... */
+		timestamp += now + GPT_FREE_RUNNING - lastdec;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SPEAR_HZ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
new file mode 100644
index 000000000..0964a9742
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\
+		LENGTH = IMAGE_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+		__start = .;
+		*(.vectors)
+		CPUDIR/spear/start.o	(.text*)
+		*(.text*)
+	} > .sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	} > .sram
+
+	. = ALIGN(4);
+	__image_copy_end = .;
+	_end = .;
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} > .sram
+}
diff --git a/roms/u-boot/arch/arm/cpu/arm926ejs/start.S b/roms/u-boot/arch/arm/cpu/arm926ejs/start.S
new file mode 100644
index 000000000..ff592ba81
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm926ejs/start.S
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *  Copyright (c) 2010	Albert Aribaud <albert.u.boot@aribaud.net>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <common.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	bl	cpu_init_crit
+#endif
+
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+	bx	lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+cpu_init_crit:
+	/*
+	 * flush D cache before disabling it
+	 */
+	mov	r0, #0
+flush_dcache:
+	mrc	p15, 0, r15, c7, c10, 3
+	bne	flush_dcache
+
+	mcr	p15, 0, r0, c8, c7, 0	/* invalidate TLB */
+	mcr	p15, 0, r0, c7, c5, 0	/* invalidate I Cache */
+
+	/*
+	 * disable MMU and D cache
+	 * enable I cache if SYS_ICACHE_OFF is not defined
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00000300	/* clear bits 9:8 (---- --RS) */
+	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
+#ifdef CONFIG_SYS_EXCEPTION_VECTORS_HIGH
+	orr	r0, r0, #0x00002000	/* set bit 13 (--V- ----) */
+#else
+	bic	r0, r0, #0x00002000	/* clear bit 13 (--V- ----) */
+#endif
+	orr	r0, r0, #0x00000002	/* set bit 1 (A) Align */
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
+#endif
+	mcr	p15, 0, r0, c1, c0, 0
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+	/*
+	 * Go setup Memory and board specific bits prior to relocation.
+	 */
+	mov	r4, lr		/* perserve link reg across call */
+	bl	lowlevel_init	/* go setup pll,mux,memory */
+	mov	lr, r4		/* restore link */
+#endif
+	mov	pc, lr		/* back to my caller */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/roms/u-boot/arch/arm/cpu/arm946es/Makefile b/roms/u-boot/arch/arm/cpu/arm946es/Makefile
new file mode 100644
index 000000000..24cebe3f5
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm946es/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	= start.o
+
+obj-y	= cpu.o
diff --git a/roms/u-boot/arch/arm/cpu/arm946es/cpu.c b/roms/u-boot/arch/arm/cpu/arm946es/cpu.c
new file mode 100644
index 000000000..334bb5427
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm946es/cpu.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/system.h>
+#include <asm/io.h>
+
+static void cache_flush(void);
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	disable_interrupts();
+
+	/* ARM926E-S needs the protection unit enabled for the icache to have
+	 * been enabled	 - left for possible later use
+	 * should turn off the protection unit as well....
+	 */
+	/* turn off I/D-cache */
+	icache_disable();
+	dcache_disable();
+	/* flush I/D-cache */
+	cache_flush();
+
+	return 0;
+}
+
+/* flush I/D-cache */
+static void cache_flush (void)
+{
+	unsigned long i = 0;
+
+	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+	asm ("mcr p15, 0, %0, c7, c6, 0": :"r" (i));
+}
+
+#ifndef CONFIG_ARCH_INTEGRATOR
+
+__attribute__((noreturn)) void reset_cpu(void)
+{
+	writew(0x0, 0xfffece10);
+	writew(0x8, 0xfffece10);
+	for (;;)
+		;
+}
+
+#endif	/* #ifdef CONFIG_ARCH_INTEGRATOR */
diff --git a/roms/u-boot/arch/arm/cpu/arm946es/start.S b/roms/u-boot/arch/arm/cpu/arm946es/start.S
new file mode 100644
index 000000000..0ec340b1a
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/arm946es/start.S
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *  Copyright (c) 2010	Albert Aribaud <albert.u.boot@aribaud.net>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	bl	cpu_init_crit
+#endif
+
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+	mov	pc, lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0	/* flush v4 I-cache */
+	mcr	p15, 0, r0, c7, c6, 0	/* flush v4 D-cache */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
+	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
+	orr	r0, r0, #0x00000002	/* set bit 1 (A) Align */
+	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
+	mcr	p15, 0, r0, c1, c0, 0
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+	/*
+	 * Go setup Memory and board specific bits prior to relocation.
+	 */
+	mov	ip, lr		/* perserve link reg across call */
+	bl	lowlevel_init	/* go setup memory */
+	mov	lr, ip		/* restore link */
+#endif
+	mov	pc, lr		/* back to my caller */
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/Kconfig b/roms/u-boot/arch/arm/cpu/armv7/Kconfig
new file mode 100644
index 000000000..60bb0a9e1
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/Kconfig
@@ -0,0 +1,79 @@
+if CPU_V7A
+
+config CPU_V7_HAS_NONSEC
+        bool
+
+config CPU_V7_HAS_VIRT
+        bool
+
+config ARCH_SUPPORT_PSCI
+        bool
+
+config ARMV7_NONSEC
+	bool "Enable support for booting in non-secure mode" if EXPERT
+	depends on CPU_V7_HAS_NONSEC
+	default y
+	---help---
+	Say Y here to enable support for booting in non-secure / SVC mode.
+
+config ARMV7_BOOT_SEC_DEFAULT
+	bool "Boot in secure mode by default" if EXPERT
+	depends on ARMV7_NONSEC
+	default y if ARCH_TEGRA
+	---help---
+	Say Y here to boot in secure mode by default even if non-secure mode
+	is supported. This option is useful to boot kernels which do not
+	suppport booting in non-secure mode. Only set this if you need it.
+	This can be overridden at run-time by setting the bootm_boot_mode env.
+	variable to "sec" or "nonsec".
+
+config ARMV7_VIRT
+	bool "Enable support for hardware virtualization" if EXPERT
+	depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC
+	default y
+	---help---
+	Say Y here to boot in hypervisor (HYP) mode when booting non-secure.
+
+config ARMV7_PSCI
+	bool "Enable PSCI support" if EXPERT
+	depends on ARMV7_NONSEC && ARCH_SUPPORT_PSCI
+	default y
+	help
+	  Say Y here to enable PSCI support.
+
+choice
+	prompt "Supported PSCI version"
+	depends on ARMV7_PSCI
+	default ARMV7_PSCI_0_1 if ARCH_SUNXI
+	default ARMV7_PSCI_1_0
+	help
+	  Select the supported PSCI version.
+
+config ARMV7_PSCI_1_0
+	bool "PSCI V1.0"
+
+config ARMV7_PSCI_0_2
+	bool "PSCI V0.2"
+
+config ARMV7_PSCI_0_1
+	bool "PSCI V0.1"
+endchoice
+
+config ARMV7_PSCI_NR_CPUS
+	int "Maximum supported CPUs for PSCI"
+	depends on ARMV7_NONSEC
+	default 4
+	help
+	  The maximum number of CPUs supported in the PSCI firmware.
+	  It is no problem to set a larger value than the number of
+	  CPUs in the actual hardware implementation.
+
+config ARMV7_LPAE
+	bool "Use LPAE page table format" if EXPERT
+	depends on CPU_V7A
+	default y if ARMV7_VIRT
+	---help---
+	Say Y here to use the long descriptor page table format. This is
+	required if U-Boot runs in HYP mode.
+
+endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/Makefile b/roms/u-boot/arch/arm/cpu/armv7/Makefile
new file mode 100644
index 000000000..0e83e394d
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/Makefile
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	:= start.o
+
+obj-y	+= cache_v7.o cache_v7_asm.o
+
+obj-y	+= cpu.o cp15.o
+obj-y	+= syslib.o
+
+obj-$(CONFIG_SYS_ARM_MPU) += mpu_v7r.o
+
+ifneq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_EFI_LOADER) += sctlr.o
+obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o
+endif
+
+ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
+obj-y	+= lowlevel_init.o
+endif
+
+obj-$(CONFIG_ARM_SMCCC)		+= smccc-call.o
+obj-$(CONFIG_ARMV7_NONSEC)	+= nonsec_virt.o virt-v7.o virt-dt.o
+obj-$(CONFIG_ARMV7_PSCI)	+= psci.o psci-common.o
+
+obj-$(CONFIG_IPROC) += iproc-common/
+obj-$(CONFIG_KONA) += kona-common/
+obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o
+
+ifneq (,$(filter s5pc1xx exynos,$(SOC)))
+obj-y += s5p-common/
+endif
+
+obj-$(if $(filter bcm235xx,$(SOC)),y) += bcm235xx/
+obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
+obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
+obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
+obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/
+obj-$(CONFIG_RMOBILE) += rmobile/
+obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
+obj-$(CONFIG_VF610) += vf610/
+obj-$(CONFIG_ARCH_S5P4418) += s5p4418/
+obj-$(CONFIG_ARCH_NEXELL) += s5p-common/
diff --git a/roms/u-boot/arch/arm/cpu/armv7/arch_timer.c b/roms/u-boot/arch/arm/cpu/armv7/arch_timer.c
new file mode 100644
index 000000000..d96406f76
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/arch_timer.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <bootstage.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_HZ_CLOCK
+static inline u32 read_cntfrq(void)
+{
+	u32 frq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (frq));
+	return frq;
+}
+#endif
+
+int timer_init(void)
+{
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+
+#ifdef CONFIG_SYS_HZ_CLOCK
+	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK;
+#else
+	gd->arch.timer_rate_hz = read_cntfrq();
+#endif
+	return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+	ulong nowl, nowu;
+
+	asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (nowl), "=r" (nowu));
+
+	gd->arch.tbl = nowl;
+	gd->arch.tbu = nowu;
+
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+
+ulong timer_get_boot_us(void)
+{
+	if (!gd->arch.timer_rate_hz)
+		timer_init();
+
+	return lldiv(get_ticks(), gd->arch.timer_rate_hz / 1000000);
+}
+
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/Makefile b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/Makefile
new file mode 100644
index 000000000..3d09126ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2013 Broadcom Corporation.
+
+obj-y	+= clk-core.o
+obj-y	+= clk-bcm235xx.o
+obj-y	+= clk-sdio.o
+obj-y	+= clk-bsc.o
+obj-$(CONFIG_BCM_SF2_ETH) += clk-eth.o
+obj-y	+= clk-usb-otg.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-bcm235xx.c b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-bcm235xx.c
new file mode 100644
index 000000000..39217c5b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-bcm235xx.c
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+/*
+ *
+ * bcm235xx-specific clock tables
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define CLOCK_1K		1000
+#define CLOCK_1M		(CLOCK_1K * 1000)
+
+/* declare a reference clock */
+#define DECLARE_REF_CLK(clk_name, clk_parent, clk_rate, clk_div) \
+static struct refclk clk_name = { \
+	.clk	=	{ \
+		.name	=	#clk_name, \
+		.parent =	clk_parent, \
+		.rate	=	clk_rate, \
+		.div	=	clk_div, \
+		.ops	=	&ref_clk_ops, \
+	}, \
+}
+
+/*
+ * Reference clocks
+ */
+
+/* Declare a list of reference clocks */
+DECLARE_REF_CLK(ref_crystal,	0,		26  * CLOCK_1M,	1);
+DECLARE_REF_CLK(var_96m,	0,		96  * CLOCK_1M,	1);
+DECLARE_REF_CLK(ref_96m,	0,		96  * CLOCK_1M,	1);
+DECLARE_REF_CLK(ref_312m,	0,		312 * CLOCK_1M,	0);
+DECLARE_REF_CLK(ref_104m,	&ref_312m.clk,	104 * CLOCK_1M,	3);
+DECLARE_REF_CLK(ref_52m,	&ref_104m.clk,	52  * CLOCK_1M,	2);
+DECLARE_REF_CLK(ref_13m,	&ref_52m.clk,	13  * CLOCK_1M,	4);
+DECLARE_REF_CLK(var_312m,	0,		312 * CLOCK_1M,	0);
+DECLARE_REF_CLK(var_104m,	&var_312m.clk,	104 * CLOCK_1M,	3);
+DECLARE_REF_CLK(var_52m,	&var_104m.clk,	52  * CLOCK_1M,	2);
+DECLARE_REF_CLK(var_13m,	&var_52m.clk,	13  * CLOCK_1M,	4);
+
+struct refclk_lkup {
+	struct refclk *procclk;
+	const char *name;
+};
+
+/* Lookup table for string to clk tranlation */
+#define MKSTR(x) {&x, #x}
+static struct refclk_lkup refclk_str_tbl[] = {
+	MKSTR(ref_crystal), MKSTR(var_96m), MKSTR(ref_96m),
+	MKSTR(ref_312m), MKSTR(ref_104m), MKSTR(ref_52m),
+	MKSTR(ref_13m), MKSTR(var_312m), MKSTR(var_104m),
+	MKSTR(var_52m), MKSTR(var_13m),
+};
+
+int refclk_entries = sizeof(refclk_str_tbl)/sizeof(refclk_str_tbl[0]);
+
+/* convert ref clock string to clock structure pointer */
+struct refclk *refclk_str_to_clk(const char *name)
+{
+	int i;
+	struct refclk_lkup *tblp = refclk_str_tbl;
+	for (i = 0; i < refclk_entries; i++, tblp++) {
+		if (!(strcmp(name, tblp->name)))
+			return tblp->procclk;
+	}
+	return NULL;
+}
+
+/* frequency tables indexed by freq_id */
+unsigned long master_axi_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M,
+	208 * CLOCK_1M,
+	312 * CLOCK_1M,
+	312 * CLOCK_1M
+};
+
+unsigned long master_ahb_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M,
+	104 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M
+};
+
+unsigned long slave_axi_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M
+};
+
+unsigned long slave_apb_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	26 * CLOCK_1M,
+	39 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M
+};
+
+unsigned long esub_freq_tbl[8] = {
+	78 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M,
+	208 * CLOCK_1M,
+	208 * CLOCK_1M,
+	208 * CLOCK_1M
+};
+
+static struct bus_clk_data bsc1_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x0458, 16, 0, 1),
+};
+
+static struct bus_clk_data bsc2_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x045c, 16, 0, 1),
+};
+
+static struct bus_clk_data bsc3_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x0484, 16, 0, 1),
+};
+
+/* * Master CCU clocks */
+static struct peri_clk_data sdio1_data = {
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a28, 0, 3),
+	.div		= DIVIDER(0x0a28, 4, 14),
+	.trig		= TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a2c, 0, 3),
+	.div		= DIVIDER(0x0a2c, 4, 14),
+	.trig		= TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a34, 0, 3),
+	.div		= DIVIDER(0x0a34, 4, 14),
+	.trig		= TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a30, 0, 3),
+	.div		= DIVIDER(0x0a30, 4, 14),
+	.trig		= TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data sdio1_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0358, 20, 4),
+};
+
+static struct peri_clk_data sdio2_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x035c, 20, 4),
+};
+
+static struct peri_clk_data sdio3_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0364, 20, 4),
+};
+
+static struct peri_clk_data sdio4_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0360, 20, 4),
+};
+
+static struct bus_clk_data usb_otg_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0348, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio1_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0358, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio2_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x035c, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio3_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0364, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio4_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0360, 16, 0, 1),
+};
+
+/* * Slave CCU clocks */
+static struct peri_clk_data bsc1_data = {
+	.gate		= HW_SW_GATE(0x0458, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a64, 0, 3),
+	.trig		= TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+	.gate		= HW_SW_GATE(0x045c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a68, 0, 3),
+	.trig		= TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+	.gate		= HW_SW_GATE(0x0484, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a84, 0, 3),
+	.trig		= TRIGGER(0x0b00, 2),
+};
+
+/*
+ * CCU clocks
+ */
+
+static struct ccu_clock kpm_ccu_clk = {
+	.clk = {
+		.name = "kpm_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 1,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = master_axi_freq_tbl,
+};
+
+static struct ccu_clock kps_ccu_clk = {
+	.clk = {
+		.name = "kps_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 1,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = slave_axi_freq_tbl,
+};
+
+#ifdef CONFIG_BCM_SF2_ETH
+static struct ccu_clock esub_ccu_clk = {
+	.clk = {
+		.name = "esub_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = ESUB_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 1,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = esub_freq_tbl,
+};
+#endif
+
+/*
+ * Bus clocks
+ */
+
+/* KPM bus clocks */
+static struct bus_clock usb_otg_ahb_clk = {
+	.clk = {
+		.name = "usb_otg_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &usb_otg_ahb_data,
+};
+
+static struct bus_clock sdio1_ahb_clk = {
+	.clk = {
+		.name = "sdio1_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio1_ahb_data,
+};
+
+static struct bus_clock sdio2_ahb_clk = {
+	.clk = {
+		.name = "sdio2_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio2_ahb_data,
+};
+
+static struct bus_clock sdio3_ahb_clk = {
+	.clk = {
+		.name = "sdio3_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio3_ahb_data,
+};
+
+static struct bus_clock sdio4_ahb_clk = {
+	.clk = {
+		.name = "sdio4_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio4_ahb_data,
+};
+
+static struct bus_clock bsc1_apb_clk = {
+	.clk = {
+		.name = "bsc1_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc1_apb_data,
+};
+
+static struct bus_clock bsc2_apb_clk = {
+	.clk = {
+		.name = "bsc2_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+		},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc2_apb_data,
+};
+
+static struct bus_clock bsc3_apb_clk = {
+	.clk = {
+		.name = "bsc3_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+		},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc3_apb_data,
+};
+
+/* KPM peripheral */
+static struct peri_clock sdio1_clk = {
+	.clk = {
+		.name = "sdio1_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio1_data,
+};
+
+static struct peri_clock sdio2_clk = {
+	.clk = {
+		.name = "sdio2_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio2_data,
+};
+
+static struct peri_clock sdio3_clk = {
+	.clk = {
+		.name = "sdio3_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio3_data,
+};
+
+static struct peri_clock sdio4_clk = {
+	.clk = {
+		.name = "sdio4_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio4_data,
+};
+
+static struct peri_clock sdio1_sleep_clk = {
+	.clk = {
+		.name = "sdio1_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio1_sleep_data,
+};
+
+static struct peri_clock sdio2_sleep_clk = {
+	.clk = {
+		.name = "sdio2_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio2_sleep_data,
+};
+
+static struct peri_clock sdio3_sleep_clk = {
+	.clk = {
+		.name = "sdio3_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio3_sleep_data,
+};
+
+static struct peri_clock sdio4_sleep_clk = {
+	.clk = {
+		.name = "sdio4_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio4_sleep_data,
+};
+
+/* KPS peripheral clock */
+static struct peri_clock bsc1_clk = {
+	.clk = {
+		.name = "bsc1_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc1_data,
+};
+
+static struct peri_clock bsc2_clk = {
+	.clk = {
+		.name = "bsc2_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc2_data,
+};
+
+static struct peri_clock bsc3_clk = {
+	.clk = {
+		.name = "bsc3_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc3_data,
+};
+
+/* public table for registering clocks */
+struct clk_lookup arch_clk_tbl[] = {
+	/* Peripheral clocks */
+	CLK_LK(sdio1),
+	CLK_LK(sdio2),
+	CLK_LK(sdio3),
+	CLK_LK(sdio4),
+	CLK_LK(sdio1_sleep),
+	CLK_LK(sdio2_sleep),
+	CLK_LK(sdio3_sleep),
+	CLK_LK(sdio4_sleep),
+	CLK_LK(bsc1),
+	CLK_LK(bsc2),
+	CLK_LK(bsc3),
+	/* Bus clocks */
+	CLK_LK(usb_otg_ahb),
+	CLK_LK(sdio1_ahb),
+	CLK_LK(sdio2_ahb),
+	CLK_LK(sdio3_ahb),
+	CLK_LK(sdio4_ahb),
+	CLK_LK(bsc1_apb),
+	CLK_LK(bsc2_apb),
+	CLK_LK(bsc3_apb),
+#ifdef CONFIG_BCM_SF2_ETH
+	CLK_LK(esub_ccu),
+#endif
+};
+
+/* public array size */
+unsigned int arch_clk_tbl_array_size = ARRAY_SIZE(arch_clk_tbl);
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-bsc.c b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-bsc.c
new file mode 100644
index 000000000..1b3f36aeb
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-bsc.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for a BSC/I2C port */
+int clk_bsc_enable(void *base)
+{
+	int ret;
+	char *bscstr, *apbstr;
+
+	switch ((u32) base) {
+	case PMU_BSC_BASE_ADDR:
+		/* PMU clock is always enabled */
+		return 0;
+	case BSC1_BASE_ADDR:
+		bscstr = "bsc1_clk";
+		apbstr = "bsc1_apb_clk";
+		break;
+	case BSC2_BASE_ADDR:
+		bscstr = "bsc2_clk";
+		apbstr = "bsc2_apb_clk";
+		break;
+	case BSC3_BASE_ADDR:
+		bscstr = "bsc3_clk";
+		apbstr = "bsc3_apb_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	/* Note that the bus clock must be enabled first */
+
+	ret = clk_get_and_enable(apbstr);
+	if (ret)
+		return ret;
+
+	ret = clk_get_and_enable(bscstr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-core.c b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-core.c
new file mode 100644
index 000000000..d7edefee2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-core.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+/*
+ *
+ * bcm235xx architecture clock framework
+ *
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <bitfield.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define CLK_WR_ACCESS_PASSWORD	0x00a5a501
+#define WR_ACCESS_OFFSET	0	/* common to all clock blocks */
+#define POLICY_CTL_GO		1	/* Load and refresh policy masks */
+#define POLICY_CTL_GO_ATL	4	/* Active Load */
+
+/* Helper function */
+int clk_get_and_enable(char *clkstr)
+{
+	int ret = 0;
+	struct clk *c;
+
+	debug("%s: %s\n", __func__, clkstr);
+
+	c = clk_get(clkstr);
+	if (c) {
+		ret = clk_enable(c);
+		if (ret)
+			return ret;
+	} else {
+		printf("%s: Couldn't find %s\n", __func__, clkstr);
+		return -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Poll a register in a CCU's address space, returning when the
+ * specified bit in that register's value is set (or clear). Delay
+ * a microsecond after each read of the register. Returns true if
+ * successful, or false if we gave up trying.
+ *
+ * Caller must ensure the CCU lock is held.
+ */
+#define CLK_GATE_DELAY_USEC 2000
+static inline int wait_bit(void *base, u32 offset, u32 bit, bool want)
+{
+	unsigned int tries;
+	u32 bit_mask = 1 << bit;
+
+	for (tries = 0; tries < CLK_GATE_DELAY_USEC; tries++) {
+		u32 val;
+		bool bit_val;
+
+		val = readl(base + offset);
+		bit_val = (val & bit_mask) ? 1 : 0;
+		if (bit_val == want)
+			return 0;	/* success */
+		udelay(1);
+	}
+
+	debug("%s: timeout on addr 0x%p, waiting for bit %d to go to %d\n",
+	      __func__, base + offset, bit, want);
+
+	return -ETIMEDOUT;
+}
+
+/* Enable a peripheral clock */
+static int peri_clk_enable(struct clk *c, int enable)
+{
+	int ret = 0;
+	u32 reg;
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	struct bcm_clk_gate *gate = &cd->gate;
+	void *base = (void *)c->ccu_clk_mgr_base;
+
+
+	debug("%s: %s\n", __func__, c->name);
+
+	clk_get_rate(c);	/* Make sure rate and sel are filled in */
+
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	if (enable) {
+		debug("%s %s set rate %lu div %lu sel %d parent %lu\n",
+		      __func__, c->name, c->rate, c->div, c->sel,
+		      c->parent->rate);
+
+		/*
+		 * clkgate - only software controllable gates are
+		 * supported by u-boot which includes all clocks
+		 * that matter. This avoids bringing in a lot of extra
+		 * complexity as done in the kernel framework.
+		 */
+		if (gate_exists(gate)) {
+			reg = readl(base + cd->gate.offset);
+			reg |= (1 << cd->gate.en_bit);
+			writel(reg, base + cd->gate.offset);
+		}
+
+		/* div and pll select */
+		if (divider_exists(&cd->div)) {
+			reg = readl(base + cd->div.offset);
+			bitfield_replace(reg, cd->div.shift, cd->div.width,
+					 c->div - 1);
+			writel(reg, base + cd->div.offset);
+		}
+
+		/* frequency selector */
+		if (selector_exists(&cd->sel)) {
+			reg = readl(base + cd->sel.offset);
+			bitfield_replace(reg, cd->sel.shift, cd->sel.width,
+					 c->sel);
+			writel(reg, base + cd->sel.offset);
+		}
+
+		/* trigger */
+		if (trigger_exists(&cd->trig)) {
+			writel((1 << cd->trig.bit), base + cd->trig.offset);
+
+			/* wait for trigger status bit to go to 0 */
+			ret = wait_bit(base, cd->trig.offset, cd->trig.bit, 0);
+			if (ret)
+				return ret;
+		}
+
+		/* wait for running (status_bit = 1) */
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 1);
+		if (ret)
+			return ret;
+	} else {
+		debug("%s disable clock %s\n", __func__, c->name);
+
+		/* clkgate */
+		reg = readl(base + cd->gate.offset);
+		reg &= ~(1 << cd->gate.en_bit);
+		writel(reg, base + cd->gate.offset);
+
+		/* wait for stop (status_bit = 0) */
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 0);
+	}
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Set the rate of a peripheral clock */
+static int peri_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret = 0;
+	int i;
+	unsigned long diff;
+	unsigned long new_rate = 0, div = 1;
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	const char **clock;
+
+	debug("%s: %s\n", __func__, c->name);
+	diff = rate;
+
+	i = 0;
+	for (clock = cd->clocks; *clock; clock++, i++) {
+		struct refclk *ref = refclk_str_to_clk(*clock);
+		if (!ref) {
+			printf("%s: Lookup of %s failed\n", __func__, *clock);
+			return -EINVAL;
+		}
+
+		/* round to the new rate */
+		div = ref->clk.rate / rate;
+		if (div == 0)
+			div = 1;
+
+		new_rate = ref->clk.rate / div;
+
+		/* get the min diff */
+		if (abs(new_rate - rate) < diff) {
+			diff = abs(new_rate - rate);
+			c->sel = i;
+			c->parent = &ref->clk;
+			c->rate = new_rate;
+			c->div = div;
+		}
+	}
+
+	debug("%s %s set rate %lu div %lu sel %d parent %lu\n", __func__,
+	      c->name, c->rate, c->div, c->sel, c->parent->rate);
+	return ret;
+}
+
+/* Get the rate of a peripheral clock */
+static unsigned long peri_clk_get_rate(struct clk *c)
+{
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int div = 1;
+	const char **clock;
+	struct refclk *ref;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (selector_exists(&cd->sel)) {
+		reg = readl(base + cd->sel.offset);
+		c->sel = bitfield_extract(reg, cd->sel.shift, cd->sel.width);
+	} else {
+		/*
+		 * For peri clocks that don't have a selector, the single
+		 * reference clock will always exist at index 0.
+		 */
+		c->sel = 0;
+	}
+
+	if (divider_exists(&cd->div)) {
+		reg = readl(base + cd->div.offset);
+		div = bitfield_extract(reg, cd->div.shift, cd->div.width);
+		div += 1;
+	}
+
+	clock = cd->clocks;
+	ref = refclk_str_to_clk(clock[c->sel]);
+	if (!ref) {
+		printf("%s: Can't lookup %s\n", __func__, clock[c->sel]);
+		return 0;
+	}
+
+	c->parent = &ref->clk;
+	c->div = div;
+	c->rate = c->parent->rate / c->div;
+	debug("%s parent rate %lu div %d sel %d rate %lu\n", __func__,
+	      c->parent->rate, div, c->sel, c->rate);
+
+	return c->rate;
+}
+
+/* Peripheral clock operations */
+struct clk_ops peri_clk_ops = {
+	.enable = peri_clk_enable,
+	.set_rate = peri_clk_set_rate,
+	.get_rate = peri_clk_get_rate,
+};
+
+/* Enable a CCU clock */
+static int ccu_clk_enable(struct clk *c, int enable)
+{
+	struct ccu_clock *ccu_clk = to_ccu_clk(c);
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int ret = 0;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!enable)
+		return -EINVAL;	/* CCU clock cannot shutdown */
+
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	/* config enable for policy engine */
+	writel(1, base + ccu_clk->lvm_en_offset);
+
+	/* wait for bit to go to 0 */
+	ret = wait_bit(base, ccu_clk->lvm_en_offset, 0, 0);
+	if (ret)
+		return ret;
+
+	/* freq ID */
+	if (!ccu_clk->freq_bit_shift)
+		ccu_clk->freq_bit_shift = 8;
+
+	/* Set frequency id for each of the 4 policies */
+	reg = ccu_clk->freq_id |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift)) |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 2)) |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 3));
+	writel(reg, base + ccu_clk->policy_freq_offset);
+
+	/* enable all clock mask */
+	writel(0x7fffffff, base + ccu_clk->policy0_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy1_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy2_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy3_mask_offset);
+
+	if (ccu_clk->num_policy_masks == 2) {
+		writel(0x7fffffff, base + ccu_clk->policy0_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy1_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy2_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy3_mask2_offset);
+	}
+
+	/* start policy engine */
+	reg = readl(base + ccu_clk->policy_ctl_offset);
+	reg |= (POLICY_CTL_GO + POLICY_CTL_GO_ATL);
+	writel(reg, base + ccu_clk->policy_ctl_offset);
+
+	/* wait till started */
+	ret = wait_bit(base, ccu_clk->policy_ctl_offset, 0, 0);
+	if (ret)
+		return ret;
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Get the CCU clock rate */
+static unsigned long ccu_clk_get_rate(struct clk *c)
+{
+	struct ccu_clock *ccu_clk = to_ccu_clk(c);
+	debug("%s: %s\n", __func__, c->name);
+	c->rate = ccu_clk->freq_tbl[ccu_clk->freq_id];
+	return c->rate;
+}
+
+/* CCU clock operations */
+struct clk_ops ccu_clk_ops = {
+	.enable = ccu_clk_enable,
+	.get_rate = ccu_clk_get_rate,
+};
+
+/* Enable a bus clock */
+static int bus_clk_enable(struct clk *c, int enable)
+{
+	struct bus_clock *bus_clk = to_bus_clk(c);
+	struct bus_clk_data *cd = bus_clk->data;
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int ret = 0;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	/* enable gating */
+	reg = readl(base + cd->gate.offset);
+	if (!!(reg & (1 << cd->gate.status_bit)) == !!enable)
+		debug("%s already %s\n", c->name,
+		      enable ? "enabled" : "disabled");
+	else {
+		int want = (enable) ? 1 : 0;
+		reg |= (1 << cd->gate.hw_sw_sel_bit);
+
+		if (enable)
+			reg |= (1 << cd->gate.en_bit);
+		else
+			reg &= ~(1 << cd->gate.en_bit);
+
+		writel(reg, base + cd->gate.offset);
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit,
+			       want);
+		if (ret)
+			return ret;
+	}
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Get the rate of a bus clock */
+static unsigned long bus_clk_get_rate(struct clk *c)
+{
+	struct bus_clock *bus_clk = to_bus_clk(c);
+	struct ccu_clock *ccu_clk;
+
+	debug("%s: %s\n", __func__, c->name);
+	ccu_clk = to_ccu_clk(c->parent);
+
+	c->rate = bus_clk->freq_tbl[ccu_clk->freq_id];
+	c->div = ccu_clk->freq_tbl[ccu_clk->freq_id] / c->rate;
+	return c->rate;
+}
+
+/* Bus clock operations */
+struct clk_ops bus_clk_ops = {
+	.enable = bus_clk_enable,
+	.get_rate = bus_clk_get_rate,
+};
+
+/* Enable a reference clock */
+static int ref_clk_enable(struct clk *c, int enable)
+{
+	debug("%s: %s\n", __func__, c->name);
+	return 0;
+}
+
+/* Reference clock operations */
+struct clk_ops ref_clk_ops = {
+	.enable = ref_clk_enable,
+};
+
+/*
+ * clk.h implementation follows
+ */
+
+/* Initialize the clock framework */
+int clk_init(void)
+{
+	debug("%s:\n", __func__);
+	return 0;
+}
+
+/* Get a clock handle, give a name string */
+struct clk *clk_get(const char *con_id)
+{
+	int i;
+	struct clk_lookup *clk_tblp;
+
+	debug("%s: %s\n", __func__, con_id);
+
+	clk_tblp = arch_clk_tbl;
+	for (i = 0; i < arch_clk_tbl_array_size; i++, clk_tblp++) {
+		if (clk_tblp->con_id) {
+			if (!con_id || strcmp(clk_tblp->con_id, con_id))
+				continue;
+			return clk_tblp->clk;
+		}
+	}
+	return NULL;
+}
+
+/* Enable a clock */
+int clk_enable(struct clk *c)
+{
+	int ret = 0;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!c->ops || !c->ops->enable)
+		return -1;
+
+	/* enable parent clock first */
+	if (c->parent)
+		ret = clk_enable(c->parent);
+
+	if (ret)
+		return ret;
+
+	if (!c->use_cnt)
+		ret = c->ops->enable(c, 1);
+	c->use_cnt++;
+
+	return ret;
+}
+
+/* Disable a clock */
+void clk_disable(struct clk *c)
+{
+	debug("%s: %s\n", __func__, c->name);
+	if (!c->ops || !c->ops->enable)
+		return;
+
+	if (c->use_cnt > 0) {
+		c->use_cnt--;
+		if (c->use_cnt == 0)
+			c->ops->enable(c, 0);
+	}
+
+	/* disable parent */
+	if (c->parent)
+		clk_disable(c->parent);
+}
+
+/* Get the clock rate */
+unsigned long clk_get_rate(struct clk *c)
+{
+	unsigned long rate;
+
+	if (!c || !c->ops || !c->ops->get_rate)
+		return 0;
+	debug("%s: %s\n", __func__, c->name);
+
+	rate = c->ops->get_rate(c);
+	debug("%s: rate = %ld\n", __func__, rate);
+	return rate;
+}
+
+/* Set the clock rate */
+int clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret;
+
+	if (!c || !c->ops || !c->ops->set_rate)
+		return -EINVAL;
+	debug("%s: %s rate=%ld\n", __func__, c->name, rate);
+
+	if (c->use_cnt)
+		return -EINVAL;
+
+	ret = c->ops->set_rate(c, rate);
+
+	return ret;
+}
+
+/* Not required for this arch */
+/*
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_parent(struct clk *clk, struct clk *parent);
+struct clk *clk_get_parent(struct clk *clk);
+*/
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-core.h b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-core.h
new file mode 100644
index 000000000..ace384dea
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-core.h
@@ -0,0 +1,491 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/stringify.h>
+
+#ifdef CONFIG_CLK_DEBUG
+#undef writel
+#undef readl
+static inline void writel(u32 val, void *addr)
+{
+	printf("Write [0x%p] = 0x%08x\n", addr, val);
+	*(u32 *)addr = val;
+}
+
+static inline u32 readl(void *addr)
+{
+	u32 val = *(u32 *)addr;
+	printf("Read  [0x%p] = 0x%08x\n", addr, val);
+	return val;
+}
+#endif
+
+struct clk;
+
+struct clk_lookup {
+	const char *dev_id;
+	const char *con_id;
+	struct clk *clk;
+};
+
+extern struct clk_lookup arch_clk_tbl[];
+extern unsigned int arch_clk_tbl_array_size;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @enable: enable/disable clock, see clk_enable() and clk_disable()
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ */
+struct clk_ops {
+	int (*enable)(struct clk *c, int enable);
+	int (*set_rate)(struct clk *c, unsigned long rate);
+	unsigned long (*get_rate)(struct clk *c);
+	unsigned long (*round_rate)(struct clk *c, unsigned long rate);
+	int (*set_parent)(struct clk *c, struct clk *parent);
+};
+
+struct clk {
+	struct clk *parent;
+	const char *name;
+	int use_cnt;
+	unsigned long rate;	/* in HZ */
+
+	/* programmable divider. 0 means fixed ratio to parent clock */
+	unsigned long div;
+
+	struct clk_src *src;
+	struct clk_ops *ops;
+
+	unsigned long ccu_clk_mgr_base;
+	int sel;
+};
+
+struct refclk *refclk_str_to_clk(const char *name);
+
+/* The common clock framework uses u8 to represent a parent index */
+#define PARENT_COUNT_MAX	((u32)U8_MAX)
+
+#define BAD_CLK_INDEX		U8_MAX	/* Can't ever be valid */
+#define BAD_CLK_NAME		((const char *)-1)
+
+#define BAD_SCALED_DIV_VALUE	U64_MAX
+
+/*
+ * Utility macros for object flag management. If possible, flags
+ * should be defined such that 0 is the desired default value.
+ */
+#define FLAG(type, flag)		BCM_CLK_ ## type ## _FLAGS_ ## flag
+#define FLAG_SET(obj, type, flag)	((obj)->flags |= FLAG(type, flag))
+#define FLAG_CLEAR(obj, type, flag)	((obj)->flags &= ~(FLAG(type, flag)))
+#define FLAG_FLIP(obj, type, flag)	((obj)->flags ^= FLAG(type, flag))
+#define FLAG_TEST(obj, type, flag)	(!!((obj)->flags & FLAG(type, flag)))
+
+/* Clock field state tests */
+
+#define gate_exists(gate)		FLAG_TEST(gate, GATE, EXISTS)
+#define gate_is_enabled(gate)		FLAG_TEST(gate, GATE, ENABLED)
+#define gate_is_hw_controllable(gate)	FLAG_TEST(gate, GATE, HW)
+#define gate_is_sw_controllable(gate)	FLAG_TEST(gate, GATE, SW)
+#define gate_is_sw_managed(gate)	FLAG_TEST(gate, GATE, SW_MANAGED)
+#define gate_is_no_disable(gate)	FLAG_TEST(gate, GATE, NO_DISABLE)
+
+#define gate_flip_enabled(gate)		FLAG_FLIP(gate, GATE, ENABLED)
+
+#define divider_exists(div)		FLAG_TEST(div, DIV, EXISTS)
+#define divider_is_fixed(div)		FLAG_TEST(div, DIV, FIXED)
+#define divider_has_fraction(div)	(!divider_is_fixed(div) && \
+						(div)->frac_width > 0)
+
+#define selector_exists(sel)		((sel)->width != 0)
+#define trigger_exists(trig)		FLAG_TEST(trig, TRIG, EXISTS)
+
+/* Clock type, used to tell common block what it's part of */
+enum bcm_clk_type {
+	bcm_clk_none,		/* undefined clock type */
+	bcm_clk_bus,
+	bcm_clk_core,
+	bcm_clk_peri
+};
+
+/*
+ * Gating control and status is managed by a 32-bit gate register.
+ *
+ * There are several types of gating available:
+ * - (no gate)
+ *     A clock with no gate is assumed to be always enabled.
+ * - hardware-only gating (auto-gating)
+ *     Enabling or disabling clocks with this type of gate is
+ *     managed automatically by the hardware. Such clocks can be
+ *     considered by the software to be enabled. The current status
+ *     of auto-gated clocks can be read from the gate status bit.
+ * - software-only gating
+ *     Auto-gating is not available for this type of clock.
+ *     Instead, software manages whether it's enabled by setting or
+ *     clearing the enable bit. The current gate status of a gate
+ *     under software control can be read from the gate status bit.
+ *     To ensure a change to the gating status is complete, the
+ *     status bit can be polled to verify that the gate has entered
+ *     the desired state.
+ * - selectable hardware or software gating
+ *     Gating for this type of clock can be configured to be either
+ *     under software or hardware control. Which type is in use is
+ *     determined by the hw_sw_sel bit of the gate register.
+ */
+struct bcm_clk_gate {
+	u32 offset;		/* gate register offset */
+	u32 status_bit;		/* 0: gate is disabled; 0: gatge is enabled */
+	u32 en_bit;		/* 0: disable; 1: enable */
+	u32 hw_sw_sel_bit;	/* 0: hardware gating; 1: software gating */
+	u32 flags;		/* BCM_CLK_GATE_FLAGS_* below */
+};
+
+/*
+ * Gate flags:
+ *   HW         means this gate can be auto-gated
+ *   SW         means the state of this gate can be software controlled
+ *   NO_DISABLE means this gate is (only) enabled if under software control
+ *   SW_MANAGED means the status of this gate is under software control
+ *   ENABLED    means this software-managed gate is *supposed* to be enabled
+ */
+#define BCM_CLK_GATE_FLAGS_EXISTS	((u32)1 << 0)	/* Gate is valid */
+#define BCM_CLK_GATE_FLAGS_HW		((u32)1 << 1)	/* Can auto-gate */
+#define BCM_CLK_GATE_FLAGS_SW		((u32)1 << 2)	/* Software control */
+#define BCM_CLK_GATE_FLAGS_NO_DISABLE	((u32)1 << 3)	/* HW or enabled */
+#define BCM_CLK_GATE_FLAGS_SW_MANAGED	((u32)1 << 4)	/* SW now in control */
+#define BCM_CLK_GATE_FLAGS_ENABLED	((u32)1 << 5)	/* If SW_MANAGED */
+
+/*
+ * Gate initialization macros.
+ *
+ * Any gate initially under software control will be enabled.
+ */
+
+/* A hardware/software gate initially under software control */
+#define HW_SW_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, SW_MANAGED)|FLAG(GATE, ENABLED)|	\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware/software gate initially under hardware control */
+#define HW_SW_GATE_AUTO(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware-or-enabled gate (enabled if not under hardware control) */
+#define HW_ENABLE_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, NO_DISABLE)|FLAG(GATE, EXISTS),	\
+	}
+
+/* A software-only gate */
+#define SW_ONLY_GATE(_offset, _status_bit, _en_bit)			\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.flags = FLAG(GATE, SW)|FLAG(GATE, SW_MANAGED)|		\
+			FLAG(GATE, ENABLED)|FLAG(GATE, EXISTS),		\
+	}
+
+/* A hardware-only gate */
+#define HW_ONLY_GATE(_offset, _status_bit)				\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS),		\
+	}
+
+/*
+ * Each clock can have zero, one, or two dividers which change the
+ * output rate of the clock. Each divider can be either fixed or
+ * variable. If there are two dividers, they are the "pre-divider"
+ * and the "regular" or "downstream" divider. If there is only one,
+ * there is no pre-divider.
+ *
+ * A fixed divider is any non-zero (positive) value, and it
+ * indicates how the input rate is affected by the divider.
+ *
+ * The value of a variable divider is maintained in a sub-field of a
+ * 32-bit divider register. The position of the field in the
+ * register is defined by its offset and width. The value recorded
+ * in this field is always 1 less than the value it represents.
+ *
+ * In addition, a variable divider can indicate that some subset
+ * of its bits represent a "fractional" part of the divider. Such
+ * bits comprise the low-order portion of the divider field, and can
+ * be viewed as representing the portion of the divider that lies to
+ * the right of the decimal point. Most variable dividers have zero
+ * fractional bits. Variable dividers with non-zero fraction width
+ * still record a value 1 less than the value they represent; the
+ * added 1 does *not* affect the low-order bit in this case, it
+ * affects the bits above the fractional part only. (Often in this
+ * code a divider field value is distinguished from the value it
+ * represents by referring to the latter as a "divisor".)
+ *
+ * In order to avoid dealing with fractions, divider arithmetic is
+ * performed using "scaled" values. A scaled value is one that's
+ * been left-shifted by the fractional width of a divider. Dividing
+ * a scaled value by a scaled divisor produces the desired quotient
+ * without loss of precision and without any other special handling
+ * for fractions.
+ *
+ * The recorded value of a variable divider can be modified. To
+ * modify either divider (or both), a clock must be enabled (i.e.,
+ * using its gate). In addition, a trigger register (described
+ * below) must be used to commit the change, and polled to verify
+ * the change is complete.
+ */
+struct bcm_clk_div {
+	union {
+		struct {	/* variable divider */
+			u32 offset;	/* divider register offset */
+			u32 shift;	/* field shift */
+			u32 width;	/* field width */
+			u32 frac_width;	/* field fraction width */
+
+			u64 scaled_div;	/* scaled divider value */
+		};
+		u32 fixed;	/* non-zero fixed divider value */
+	};
+	u32 flags;		/* BCM_CLK_DIV_FLAGS_* below */
+};
+
+/*
+ * Divider flags:
+ *   EXISTS means this divider exists
+ *   FIXED means it is a fixed-rate divider
+ */
+#define BCM_CLK_DIV_FLAGS_EXISTS	((u32)1 << 0)	/* Divider is valid */
+#define BCM_CLK_DIV_FLAGS_FIXED		((u32)1 << 1)	/* Fixed-value */
+
+/* Divider initialization macros */
+
+/* A fixed (non-zero) divider */
+#define FIXED_DIVIDER(_value)						\
+	{								\
+		.fixed = (_value),					\
+		.flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED),		\
+	}
+
+/* A divider with an integral divisor */
+#define DIVIDER(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/* A divider whose divisor has an integer and fractional part */
+#define FRAC_DIVIDER(_offset, _shift, _width, _frac_width)		\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.frac_width = (_frac_width),				\
+		.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/*
+ * Clocks may have multiple "parent" clocks. If there is more than
+ * one, a selector must be specified to define which of the parent
+ * clocks is currently in use. The selected clock is indicated in a
+ * sub-field of a 32-bit selector register. The range of
+ * representable selector values typically exceeds the number of
+ * available parent clocks. Occasionally the reset value of a
+ * selector field is explicitly set to a (specific) value that does
+ * not correspond to a defined input clock.
+ *
+ * We register all known parent clocks with the common clock code
+ * using a packed array (i.e., no empty slots) of (parent) clock
+ * names, and refer to them later using indexes into that array.
+ * We maintain an array of selector values indexed by common clock
+ * index values in order to map between these common clock indexes
+ * and the selector values used by the hardware.
+ *
+ * Like dividers, a selector can be modified, but to do so a clock
+ * must be enabled, and a trigger must be used to commit the change.
+ */
+struct bcm_clk_sel {
+	u32 offset;		/* selector register offset */
+	u32 shift;		/* field shift */
+	u32 width;		/* field width */
+
+	u32 parent_count;	/* number of entries in parent_sel[] */
+	u32 *parent_sel;	/* array of parent selector values */
+	u8 clk_index;		/* current selected index in parent_sel[] */
+};
+
+/* Selector initialization macro */
+#define SELECTOR(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.clk_index = BAD_CLK_INDEX,				\
+	}
+
+/*
+ * Making changes to a variable divider or a selector for a clock
+ * requires the use of a trigger. A trigger is defined by a single
+ * bit within a register. To signal a change, a 1 is written into
+ * that bit. To determine when the change has been completed, that
+ * trigger bit is polled; the read value will be 1 while the change
+ * is in progress, and 0 when it is complete.
+ *
+ * Occasionally a clock will have more than one trigger. In this
+ * case, the "pre-trigger" will be used when changing a clock's
+ * selector and/or its pre-divider.
+ */
+struct bcm_clk_trig {
+	u32 offset;		/* trigger register offset */
+	u32 bit;		/* trigger bit */
+	u32 flags;		/* BCM_CLK_TRIG_FLAGS_* below */
+};
+
+/*
+ * Trigger flags:
+ *   EXISTS means this trigger exists
+ */
+#define BCM_CLK_TRIG_FLAGS_EXISTS	((u32)1 << 0)	/* Trigger is valid */
+
+/* Trigger initialization macro */
+#define TRIGGER(_offset, _bit)						\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+		.flags = FLAG(TRIG, EXISTS),				\
+	}
+
+struct bus_clk_data {
+	struct bcm_clk_gate gate;
+};
+
+struct core_clk_data {
+	struct bcm_clk_gate gate;
+};
+
+struct peri_clk_data {
+	struct bcm_clk_gate gate;
+	struct bcm_clk_trig pre_trig;
+	struct bcm_clk_div pre_div;
+	struct bcm_clk_trig trig;
+	struct bcm_clk_div div;
+	struct bcm_clk_sel sel;
+	const char *clocks[];	/* must be last; use CLOCKS() to declare */
+};
+#define CLOCKS(...)	{ __VA_ARGS__, NULL, }
+#define NO_CLOCKS	{ NULL, }	/* Must use of no parent clocks */
+
+struct refclk {
+	struct clk clk;
+};
+
+struct peri_clock {
+	struct clk clk;
+	struct peri_clk_data *data;
+};
+
+struct ccu_clock {
+	struct clk clk;
+
+	int num_policy_masks;
+	unsigned long policy_freq_offset;
+	int freq_bit_shift;	/* 8 for most CCUs */
+	unsigned long policy_ctl_offset;
+	unsigned long policy0_mask_offset;
+	unsigned long policy1_mask_offset;
+	unsigned long policy2_mask_offset;
+	unsigned long policy3_mask_offset;
+	unsigned long policy0_mask2_offset;
+	unsigned long policy1_mask2_offset;
+	unsigned long policy2_mask2_offset;
+	unsigned long policy3_mask2_offset;
+	unsigned long lvm_en_offset;
+
+	int freq_id;
+	unsigned long *freq_tbl;
+};
+
+struct bus_clock {
+	struct clk clk;
+	struct bus_clk_data *data;
+	unsigned long *freq_tbl;
+};
+
+struct ref_clock {
+	struct clk clk;
+};
+
+static inline int is_same_clock(struct clk *a, struct clk *b)
+{
+	return a == b;
+}
+
+#define to_clk(p) (&((p)->clk))
+#define name_to_clk(name) (&((name##_clk).clk))
+/* declare a struct clk_lookup */
+#define CLK_LK(name) \
+{.con_id = __stringify(name##_clk), .clk = name_to_clk(name),}
+
+static inline struct refclk *to_refclk(struct clk *clock)
+{
+	return container_of(clock, struct refclk, clk);
+}
+
+static inline struct peri_clock *to_peri_clk(struct clk *clock)
+{
+	return container_of(clock, struct peri_clock, clk);
+}
+
+static inline struct ccu_clock *to_ccu_clk(struct clk *clock)
+{
+	return container_of(clock, struct ccu_clock, clk);
+}
+
+static inline struct bus_clock *to_bus_clk(struct clk *clock)
+{
+	return container_of(clock, struct bus_clock, clk);
+}
+
+static inline struct ref_clock *to_ref_clk(struct clk *clock)
+{
+	return container_of(clock, struct ref_clock, clk);
+}
+
+extern struct clk_ops peri_clk_ops;
+extern struct clk_ops ccu_clk_ops;
+extern struct clk_ops bus_clk_ops;
+extern struct clk_ops ref_clk_ops;
+
+int clk_get_and_enable(char *clkstr);
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-eth.c b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-eth.c
new file mode 100644
index 000000000..209ceca9a
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-eth.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define WR_ACCESS_ADDR			ESUB_CLK_BASE_ADDR
+#define WR_ACCESS_PASSWORD				0xA5A500
+
+#define PLLE_POST_RESETB_ADDR		(ESUB_CLK_BASE_ADDR + 0x00000C00)
+
+#define PLLE_RESETB_ADDR		(ESUB_CLK_BASE_ADDR + 0x00000C58)
+#define PLLE_RESETB_I_PLL_RESETB_PLLE_MASK		0x00010000
+#define PLLE_POST_RESETB_I_POST_RESETB_PLLE_MASK	0x00000001
+
+#define PLL_LOCK_ADDR			(ESUB_CLK_BASE_ADDR + 0x00000C38)
+#define PLL_LOCK_PLL_LOCK_PLLE_MASK			0x00000001
+
+#define ESW_SYS_DIV_ADDR		(ESUB_CLK_BASE_ADDR + 0x00000A04)
+#define ESW_SYS_DIV_PLL_SELECT_MASK			0x00000300
+#define ESW_SYS_DIV_DIV_MASK				0x0000001C
+#define ESW_SYS_DIV_PLL_VAR_208M_CLK_SELECT		0x00000100
+#define ESW_SYS_DIV_DIV_SELECT				0x4
+#define ESW_SYS_DIV_TRIGGER_MASK			0x00000001
+
+#define ESUB_AXI_DIV_DEBUG_ADDR		(ESUB_CLK_BASE_ADDR + 0x00000E04)
+#define ESUB_AXI_DIV_DEBUG_PLL_SELECT_MASK		0x0000001C
+#define ESUB_AXI_DIV_DEBUG_PLL_SELECT_OVERRIDE_MASK	0x00000040
+#define ESUB_AXI_DIV_DEBUG_PLL_VAR_208M_CLK_SELECT	0x0
+#define ESUB_AXI_DIV_DEBUG_TRIGGER_MASK			0x00000001
+
+#define PLL_MAX_RETRY	100
+
+/* Enable appropriate clocks for Ethernet */
+int clk_eth_enable(void)
+{
+	int rc = -1;
+	int retry_count = 0;
+	rc = clk_get_and_enable("esub_ccu_clk");
+
+	/* Enable Access to CCU registers */
+	writel((1 | WR_ACCESS_PASSWORD), WR_ACCESS_ADDR);
+
+	writel(readl(PLLE_POST_RESETB_ADDR) &
+	       ~PLLE_POST_RESETB_I_POST_RESETB_PLLE_MASK,
+	       PLLE_POST_RESETB_ADDR);
+
+	/* Take PLL out of reset and put into normal mode */
+	writel(readl(PLLE_RESETB_ADDR) | PLLE_RESETB_I_PLL_RESETB_PLLE_MASK,
+	       PLLE_RESETB_ADDR);
+
+	/* Wait for PLL lock */
+	rc = -1;
+	while (retry_count < PLL_MAX_RETRY) {
+		udelay(100);
+		if (readl(PLL_LOCK_ADDR) & PLL_LOCK_PLL_LOCK_PLLE_MASK) {
+			rc = 0;
+			break;
+		}
+		retry_count++;
+	}
+
+	if (rc == -1) {
+		printf("%s: ETH-PLL lock timeout, Ethernet is not enabled!\n",
+		       __func__);
+		return -1;
+	}
+
+	writel(readl(PLLE_POST_RESETB_ADDR) |
+	       PLLE_POST_RESETB_I_POST_RESETB_PLLE_MASK,
+	       PLLE_POST_RESETB_ADDR);
+
+	/* Switch esw_sys_clk to use 104MHz(208MHz/2) clock */
+	writel((readl(ESW_SYS_DIV_ADDR) &
+		~(ESW_SYS_DIV_PLL_SELECT_MASK | ESW_SYS_DIV_DIV_MASK)) |
+	       ESW_SYS_DIV_PLL_VAR_208M_CLK_SELECT | ESW_SYS_DIV_DIV_SELECT,
+	       ESW_SYS_DIV_ADDR);
+
+	writel(readl(ESW_SYS_DIV_ADDR) | ESW_SYS_DIV_TRIGGER_MASK,
+	       ESW_SYS_DIV_ADDR);
+
+	/* Wait for trigger complete */
+	rc = -1;
+	retry_count = 0;
+	while (retry_count < PLL_MAX_RETRY) {
+		udelay(100);
+		if (!(readl(ESW_SYS_DIV_ADDR) & ESW_SYS_DIV_TRIGGER_MASK)) {
+			rc = 0;
+			break;
+		}
+		retry_count++;
+	}
+
+	if (rc == -1) {
+		printf("%s: SYS CLK Trigger timeout, Ethernet is not enabled!\n",
+		       __func__);
+		return -1;
+	}
+
+	/* switch Esub AXI clock to 208MHz */
+	writel((readl(ESUB_AXI_DIV_DEBUG_ADDR) &
+		~(ESUB_AXI_DIV_DEBUG_PLL_SELECT_MASK |
+		  ESUB_AXI_DIV_DEBUG_PLL_SELECT_OVERRIDE_MASK |
+		  ESUB_AXI_DIV_DEBUG_TRIGGER_MASK)) |
+	       ESUB_AXI_DIV_DEBUG_PLL_VAR_208M_CLK_SELECT |
+	       ESUB_AXI_DIV_DEBUG_PLL_SELECT_OVERRIDE_MASK,
+	       ESUB_AXI_DIV_DEBUG_ADDR);
+
+	writel(readl(ESUB_AXI_DIV_DEBUG_ADDR) |
+	       ESUB_AXI_DIV_DEBUG_TRIGGER_MASK,
+	       ESUB_AXI_DIV_DEBUG_ADDR);
+
+	/* Wait for trigger complete */
+	rc = -1;
+	retry_count = 0;
+	while (retry_count < PLL_MAX_RETRY) {
+		udelay(100);
+		if (!(readl(ESUB_AXI_DIV_DEBUG_ADDR) &
+		      ESUB_AXI_DIV_DEBUG_TRIGGER_MASK)) {
+			rc = 0;
+			break;
+		}
+		retry_count++;
+	}
+
+	if (rc == -1) {
+		printf("%s: AXI CLK Trigger timeout, Ethernet is not enabled!\n",
+		       __func__);
+		return -1;
+	}
+
+	/* Disable Access to CCU registers */
+	writel(WR_ACCESS_PASSWORD, WR_ACCESS_ADDR);
+
+	return rc;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-sdio.c b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-sdio.c
new file mode 100644
index 000000000..f2ba354c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-sdio.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for an SDIO port */
+int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	int ret;
+	struct clk *c;
+
+	char *clkstr;
+	char *slpstr;
+	char *ahbstr;
+
+	switch ((u32) base) {
+	case CONFIG_SYS_SDIO_BASE0:
+		clkstr = CONFIG_SYS_SDIO0 "_clk";
+		ahbstr = CONFIG_SYS_SDIO0 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO0 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE1:
+		clkstr = CONFIG_SYS_SDIO1 "_clk";
+		ahbstr = CONFIG_SYS_SDIO1 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO1 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE2:
+		clkstr = CONFIG_SYS_SDIO2 "_clk";
+		ahbstr = CONFIG_SYS_SDIO2 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO2 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE3:
+		clkstr = CONFIG_SYS_SDIO3 "_clk";
+		ahbstr = CONFIG_SYS_SDIO3 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO3 "_sleep_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	ret = clk_get_and_enable(ahbstr);
+	if (ret)
+		return ret;
+
+	ret = clk_get_and_enable(slpstr);
+	if (ret)
+		return ret;
+
+	c = clk_get(clkstr);
+	if (c) {
+		ret = clk_set_rate(c, rate);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(c);
+		if (ret)
+			return ret;
+	} else {
+		printf("%s: Couldn't find %s\n", __func__, clkstr);
+		return -EINVAL;
+	}
+	*actual_ratep = rate;
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-usb-otg.c b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-usb-otg.c
new file mode 100644
index 000000000..f604aec62
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm235xx/clk-usb-otg.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for the USB OTG port */
+int clk_usb_otg_enable(void *base)
+{
+	char *ahbstr;
+
+	switch ((u32) base) {
+	case HSOTG_BASE_ADDR:
+		ahbstr = "usb_otg_ahb_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	return clk_get_and_enable(ahbstr);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile
new file mode 100644
index 000000000..e5099975c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2013 Broadcom Corporation.
+
+obj-y	+= reset.o
+obj-y	+= clk-core.o
+obj-y	+= clk-bcm281xx.o
+obj-y	+= clk-sdio.o
+obj-y	+= clk-bsc.o
+obj-$(CONFIG_BCM_SF2_ETH) += clk-eth.o
+obj-y	+= clk-usb-otg.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
new file mode 100644
index 000000000..8f6260e78
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
@@ -0,0 +1,572 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+/*
+ *
+ * bcm281xx-specific clock tables
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define CLOCK_1K		1000
+#define CLOCK_1M		(CLOCK_1K * 1000)
+
+/* declare a reference clock */
+#define DECLARE_REF_CLK(clk_name, clk_parent, clk_rate, clk_div) \
+static struct refclk clk_name = { \
+	.clk    =       { \
+		.name   =       #clk_name, \
+		.parent =       clk_parent, \
+		.rate   =       clk_rate, \
+		.div    =       clk_div, \
+		.ops    =       &ref_clk_ops, \
+	}, \
+}
+
+/*
+ * Reference clocks
+ */
+
+/* Declare a list of reference clocks */
+DECLARE_REF_CLK(ref_crystal,	0,		26  * CLOCK_1M,	1);
+DECLARE_REF_CLK(var_96m,	0,		96  * CLOCK_1M,	1);
+DECLARE_REF_CLK(ref_96m,	0,		96  * CLOCK_1M,	1);
+DECLARE_REF_CLK(ref_312m,	0,		312 * CLOCK_1M,	0);
+DECLARE_REF_CLK(ref_104m,	&ref_312m.clk,	104 * CLOCK_1M,	3);
+DECLARE_REF_CLK(ref_52m,	&ref_104m.clk,	52  * CLOCK_1M,	2);
+DECLARE_REF_CLK(ref_13m,	&ref_52m.clk,	13  * CLOCK_1M,	4);
+DECLARE_REF_CLK(var_312m,	0,		312 * CLOCK_1M,	0);
+DECLARE_REF_CLK(var_104m,	&var_312m.clk,	104 * CLOCK_1M,	3);
+DECLARE_REF_CLK(var_52m,	&var_104m.clk,	52  * CLOCK_1M,	2);
+DECLARE_REF_CLK(var_13m,	&var_52m.clk,	13  * CLOCK_1M,	4);
+
+struct refclk_lkup {
+	struct refclk *procclk;
+	const char *name;
+};
+
+/* Lookup table for string to clk tranlation */
+#define MKSTR(x) {&x, #x}
+static struct refclk_lkup refclk_str_tbl[] = {
+	MKSTR(ref_crystal), MKSTR(var_96m), MKSTR(ref_96m),
+	MKSTR(ref_312m), MKSTR(ref_104m), MKSTR(ref_52m),
+	MKSTR(ref_13m), MKSTR(var_312m), MKSTR(var_104m),
+	MKSTR(var_52m), MKSTR(var_13m),
+};
+
+int refclk_entries = sizeof(refclk_str_tbl)/sizeof(refclk_str_tbl[0]);
+
+/* convert ref clock string to clock structure pointer */
+struct refclk *refclk_str_to_clk(const char *name)
+{
+	int i;
+	struct refclk_lkup *tblp = refclk_str_tbl;
+	for (i = 0; i < refclk_entries; i++, tblp++) {
+		if (!(strcmp(name, tblp->name)))
+			return tblp->procclk;
+	}
+	return NULL;
+}
+
+/* frequency tables indexed by freq_id */
+unsigned long master_axi_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M,
+	208 * CLOCK_1M,
+	312 * CLOCK_1M,
+	312 * CLOCK_1M
+};
+
+unsigned long master_ahb_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M,
+	104 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M
+};
+
+unsigned long slave_axi_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M
+};
+
+unsigned long slave_apb_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	26 * CLOCK_1M,
+	39 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M
+};
+
+unsigned long esub_freq_tbl[8] = {
+	78 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M,
+	208 * CLOCK_1M,
+	208 * CLOCK_1M,
+	208 * CLOCK_1M
+};
+
+static struct bus_clk_data bsc1_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x0458, 16, 0, 1),
+};
+
+static struct bus_clk_data bsc2_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x045c, 16, 0, 1),
+};
+
+static struct bus_clk_data bsc3_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x0484, 16, 0, 1),
+};
+
+/* * Master CCU clocks */
+static struct peri_clk_data sdio1_data = {
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a28, 0, 3),
+	.div		= DIVIDER(0x0a28, 4, 14),
+	.trig		= TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a2c, 0, 3),
+	.div		= DIVIDER(0x0a2c, 4, 14),
+	.trig		= TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a34, 0, 3),
+	.div		= DIVIDER(0x0a34, 4, 14),
+	.trig		= TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a30, 0, 3),
+	.div		= DIVIDER(0x0a30, 4, 14),
+	.trig		= TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data sdio1_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0358, 20, 4),
+};
+
+static struct peri_clk_data sdio2_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x035c, 20, 4),
+};
+
+static struct peri_clk_data sdio3_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0364, 20, 4),
+};
+
+static struct peri_clk_data sdio4_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0360, 20, 4),
+};
+
+static struct bus_clk_data usb_otg_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0348, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio1_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0358, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio2_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x035c, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio3_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0364, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio4_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0360, 16, 0, 1),
+};
+
+/* * Slave CCU clocks */
+static struct peri_clk_data bsc1_data = {
+	.gate		= HW_SW_GATE(0x0458, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a64, 0, 3),
+	.trig		= TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+	.gate		= HW_SW_GATE(0x045c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a68, 0, 3),
+	.trig		= TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+	.gate		= HW_SW_GATE(0x0484, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a84, 0, 3),
+	.trig		= TRIGGER(0x0b00, 2),
+};
+
+/*
+ * CCU clocks
+ */
+
+static struct ccu_clock kpm_ccu_clk = {
+	.clk = {
+		.name = "kpm_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 1,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = master_axi_freq_tbl,
+};
+
+static struct ccu_clock kps_ccu_clk = {
+	.clk = {
+		.name = "kps_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 2,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.policy0_mask2_offset = 0x00000048,
+	.policy1_mask2_offset = 0x0000004c,
+	.policy2_mask2_offset = 0x00000050,
+	.policy3_mask2_offset = 0x00000054,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = slave_axi_freq_tbl,
+};
+
+#ifdef CONFIG_BCM_SF2_ETH
+static struct ccu_clock esub_ccu_clk = {
+	.clk = {
+		.name = "esub_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = ESUB_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 1,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = esub_freq_tbl,
+};
+#endif
+
+/*
+ * Bus clocks
+ */
+
+/* KPM bus clocks */
+static struct bus_clock usb_otg_ahb_clk = {
+	.clk = {
+		.name = "usb_otg_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &usb_otg_ahb_data,
+};
+
+static struct bus_clock sdio1_ahb_clk = {
+	.clk = {
+		.name = "sdio1_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio1_ahb_data,
+};
+
+static struct bus_clock sdio2_ahb_clk = {
+	.clk = {
+		.name = "sdio2_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio2_ahb_data,
+};
+
+static struct bus_clock sdio3_ahb_clk = {
+	.clk = {
+		.name = "sdio3_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio3_ahb_data,
+};
+
+static struct bus_clock sdio4_ahb_clk = {
+	.clk = {
+		.name = "sdio4_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio4_ahb_data,
+};
+
+static struct bus_clock bsc1_apb_clk = {
+	.clk = {
+		.name = "bsc1_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc1_apb_data,
+};
+
+static struct bus_clock bsc2_apb_clk = {
+	.clk = {
+		.name = "bsc2_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+		},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc2_apb_data,
+};
+
+static struct bus_clock bsc3_apb_clk = {
+	.clk = {
+		.name = "bsc3_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+		},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc3_apb_data,
+};
+
+/* KPM peripheral */
+static struct peri_clock sdio1_clk = {
+	.clk = {
+		.name = "sdio1_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio1_data,
+};
+
+static struct peri_clock sdio2_clk = {
+	.clk = {
+		.name = "sdio2_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio2_data,
+};
+
+static struct peri_clock sdio3_clk = {
+	.clk = {
+		.name = "sdio3_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio3_data,
+};
+
+static struct peri_clock sdio4_clk = {
+	.clk = {
+		.name = "sdio4_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio4_data,
+};
+
+static struct peri_clock sdio1_sleep_clk = {
+	.clk = {
+		.name = "sdio1_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio1_sleep_data,
+};
+
+static struct peri_clock sdio2_sleep_clk = {
+	.clk = {
+		.name = "sdio2_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio2_sleep_data,
+};
+
+static struct peri_clock sdio3_sleep_clk = {
+	.clk = {
+		.name = "sdio3_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio3_sleep_data,
+};
+
+static struct peri_clock sdio4_sleep_clk = {
+	.clk = {
+		.name = "sdio4_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio4_sleep_data,
+};
+
+/* KPS peripheral clock */
+static struct peri_clock bsc1_clk = {
+	.clk = {
+		.name = "bsc1_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc1_data,
+};
+
+static struct peri_clock bsc2_clk = {
+	.clk = {
+		.name = "bsc2_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc2_data,
+};
+
+static struct peri_clock bsc3_clk = {
+	.clk = {
+		.name = "bsc3_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc3_data,
+};
+
+/* public table for registering clocks */
+struct clk_lookup arch_clk_tbl[] = {
+	/* Peripheral clocks */
+	CLK_LK(sdio1),
+	CLK_LK(sdio2),
+	CLK_LK(sdio3),
+	CLK_LK(sdio4),
+	CLK_LK(sdio1_sleep),
+	CLK_LK(sdio2_sleep),
+	CLK_LK(sdio3_sleep),
+	CLK_LK(sdio4_sleep),
+	CLK_LK(bsc1),
+	CLK_LK(bsc2),
+	CLK_LK(bsc3),
+	/* Bus clocks */
+	CLK_LK(usb_otg_ahb),
+	CLK_LK(sdio1_ahb),
+	CLK_LK(sdio2_ahb),
+	CLK_LK(sdio3_ahb),
+	CLK_LK(sdio4_ahb),
+	CLK_LK(bsc1_apb),
+	CLK_LK(bsc2_apb),
+	CLK_LK(bsc3_apb),
+#ifdef CONFIG_BCM_SF2_ETH
+	CLK_LK(esub_ccu),
+#endif
+};
+
+/* public array size */
+unsigned int arch_clk_tbl_array_size = ARRAY_SIZE(arch_clk_tbl);
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c
new file mode 100644
index 000000000..1b3f36aeb
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for a BSC/I2C port */
+int clk_bsc_enable(void *base)
+{
+	int ret;
+	char *bscstr, *apbstr;
+
+	switch ((u32) base) {
+	case PMU_BSC_BASE_ADDR:
+		/* PMU clock is always enabled */
+		return 0;
+	case BSC1_BASE_ADDR:
+		bscstr = "bsc1_clk";
+		apbstr = "bsc1_apb_clk";
+		break;
+	case BSC2_BASE_ADDR:
+		bscstr = "bsc2_clk";
+		apbstr = "bsc2_apb_clk";
+		break;
+	case BSC3_BASE_ADDR:
+		bscstr = "bsc3_clk";
+		apbstr = "bsc3_apb_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	/* Note that the bus clock must be enabled first */
+
+	ret = clk_get_and_enable(apbstr);
+	if (ret)
+		return ret;
+
+	ret = clk_get_and_enable(bscstr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-core.c b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-core.c
new file mode 100644
index 000000000..26b673a54
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-core.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+/*
+ *
+ * bcm281xx architecture clock framework
+ *
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <bitfield.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define CLK_WR_ACCESS_PASSWORD	0x00a5a501
+#define WR_ACCESS_OFFSET	0	/* common to all clock blocks */
+#define POLICY_CTL_GO		1	/* Load and refresh policy masks */
+#define POLICY_CTL_GO_ATL	4	/* Active Load */
+
+/* Helper function */
+int clk_get_and_enable(char *clkstr)
+{
+	int ret = 0;
+	struct clk *c;
+
+	debug("%s: %s\n", __func__, clkstr);
+
+	c = clk_get(clkstr);
+	if (c) {
+		ret = clk_enable(c);
+		if (ret)
+			return ret;
+	} else {
+		printf("%s: Couldn't find %s\n", __func__, clkstr);
+		return -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Poll a register in a CCU's address space, returning when the
+ * specified bit in that register's value is set (or clear).  Delay
+ * a microsecond after each read of the register.  Returns true if
+ * successful, or false if we gave up trying.
+ *
+ * Caller must ensure the CCU lock is held.
+ */
+#define CLK_GATE_DELAY_USEC 2000
+static inline int wait_bit(void *base, u32 offset, u32 bit, bool want)
+{
+	unsigned int tries;
+	u32 bit_mask = 1 << bit;
+
+	for (tries = 0; tries < CLK_GATE_DELAY_USEC; tries++) {
+		u32 val;
+		bool bit_val;
+
+		val = readl(base + offset);
+		bit_val = (val & bit_mask) ? 1 : 0;
+		if (bit_val == want)
+			return 0;	/* success */
+		udelay(1);
+	}
+
+	debug("%s: timeout on addr 0x%p, waiting for bit %d to go to %d\n",
+	      __func__, base + offset, bit, want);
+
+	return -ETIMEDOUT;
+}
+
+/* Enable a peripheral clock */
+static int peri_clk_enable(struct clk *c, int enable)
+{
+	int ret = 0;
+	u32 reg;
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	struct bcm_clk_gate *gate = &cd->gate;
+	void *base = (void *)c->ccu_clk_mgr_base;
+
+
+	debug("%s: %s\n", __func__, c->name);
+
+	clk_get_rate(c);	/* Make sure rate and sel are filled in */
+
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	if (enable) {
+		debug("%s %s set rate %lu div %lu sel %d parent %lu\n",
+		      __func__, c->name, c->rate, c->div, c->sel,
+		      c->parent->rate);
+
+		/*
+		 * clkgate - only software controllable gates are
+		 * supported by u-boot which includes all clocks
+		 * that matter. This avoids bringing in a lot of extra
+		 * complexity as done in the kernel framework.
+		 */
+		if (gate_exists(gate)) {
+			reg = readl(base + cd->gate.offset);
+			reg |= (1 << cd->gate.en_bit);
+			writel(reg, base + cd->gate.offset);
+		}
+
+		/* div and pll select */
+		if (divider_exists(&cd->div)) {
+			reg = readl(base + cd->div.offset);
+			bitfield_replace(reg, cd->div.shift, cd->div.width,
+					 c->div - 1);
+			writel(reg, base + cd->div.offset);
+		}
+
+		/* frequency selector */
+		if (selector_exists(&cd->sel)) {
+			reg = readl(base + cd->sel.offset);
+			bitfield_replace(reg, cd->sel.shift, cd->sel.width,
+					 c->sel);
+			writel(reg, base + cd->sel.offset);
+		}
+
+		/* trigger */
+		if (trigger_exists(&cd->trig)) {
+			writel((1 << cd->trig.bit), base + cd->trig.offset);
+
+			/* wait for trigger status bit to go to 0 */
+			ret = wait_bit(base, cd->trig.offset, cd->trig.bit, 0);
+			if (ret)
+				return ret;
+		}
+
+		/* wait for running (status_bit = 1) */
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 1);
+		if (ret)
+			return ret;
+	} else {
+		debug("%s disable clock %s\n", __func__, c->name);
+
+		/* clkgate */
+		reg = readl(base + cd->gate.offset);
+		reg &= ~(1 << cd->gate.en_bit);
+		writel(reg, base + cd->gate.offset);
+
+		/* wait for stop (status_bit = 0) */
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 0);
+	}
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Set the rate of a peripheral clock */
+static int peri_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret = 0;
+	int i;
+	unsigned long diff;
+	unsigned long new_rate = 0, div = 1;
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	const char **clock;
+
+	debug("%s: %s\n", __func__, c->name);
+	diff = rate;
+
+	i = 0;
+	for (clock = cd->clocks; *clock; clock++, i++) {
+		struct refclk *ref = refclk_str_to_clk(*clock);
+		if (!ref) {
+			printf("%s: Lookup of %s failed\n", __func__, *clock);
+			return -EINVAL;
+		}
+
+		/* round to the new rate */
+		div = ref->clk.rate / rate;
+		if (div == 0)
+			div = 1;
+
+		new_rate = ref->clk.rate / div;
+
+		/* get the min diff */
+		if (abs(new_rate - rate) < diff) {
+			diff = abs(new_rate - rate);
+			c->sel = i;
+			c->parent = &ref->clk;
+			c->rate = new_rate;
+			c->div = div;
+		}
+	}
+
+	debug("%s %s set rate %lu div %lu sel %d parent %lu\n", __func__,
+	      c->name, c->rate, c->div, c->sel, c->parent->rate);
+	return ret;
+}
+
+/* Get the rate of a peripheral clock */
+static unsigned long peri_clk_get_rate(struct clk *c)
+{
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int div = 1;
+	const char **clock;
+	struct refclk *ref;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (selector_exists(&cd->sel)) {
+		reg = readl(base + cd->sel.offset);
+		c->sel = bitfield_extract(reg, cd->sel.shift, cd->sel.width);
+	} else {
+		/*
+		 * For peri clocks that don't have a selector, the single
+		 * reference clock will always exist at index 0.
+		 */
+		c->sel = 0;
+	}
+
+	if (divider_exists(&cd->div)) {
+		reg = readl(base + cd->div.offset);
+		div = bitfield_extract(reg, cd->div.shift, cd->div.width);
+		div += 1;
+	}
+
+	clock = cd->clocks;
+	ref = refclk_str_to_clk(clock[c->sel]);
+	if (!ref) {
+		printf("%s: Can't lookup %s\n", __func__, clock[c->sel]);
+		return 0;
+	}
+
+	c->parent = &ref->clk;
+	c->div = div;
+	c->rate = c->parent->rate / c->div;
+	debug("%s parent rate %lu div %d sel %d rate %lu\n", __func__,
+	      c->parent->rate, div, c->sel, c->rate);
+
+	return c->rate;
+}
+
+/* Peripheral clock operations */
+struct clk_ops peri_clk_ops = {
+	.enable = peri_clk_enable,
+	.set_rate = peri_clk_set_rate,
+	.get_rate = peri_clk_get_rate,
+};
+
+/* Enable a CCU clock */
+static int ccu_clk_enable(struct clk *c, int enable)
+{
+	struct ccu_clock *ccu_clk = to_ccu_clk(c);
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int ret = 0;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!enable)
+		return -EINVAL;	/* CCU clock cannot shutdown */
+
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	/* config enable for policy engine */
+	writel(1, base + ccu_clk->lvm_en_offset);
+
+	/* wait for bit to go to 0 */
+	ret = wait_bit(base, ccu_clk->lvm_en_offset, 0, 0);
+	if (ret)
+		return ret;
+
+	/* freq ID */
+	if (!ccu_clk->freq_bit_shift)
+		ccu_clk->freq_bit_shift = 8;
+
+	/* Set frequency id for each of the 4 policies */
+	reg = ccu_clk->freq_id |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift)) |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 2)) |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 3));
+	writel(reg, base + ccu_clk->policy_freq_offset);
+
+	/* enable all clock mask */
+	writel(0x7fffffff, base + ccu_clk->policy0_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy1_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy2_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy3_mask_offset);
+
+	if (ccu_clk->num_policy_masks == 2) {
+		writel(0x7fffffff, base + ccu_clk->policy0_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy1_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy2_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy3_mask2_offset);
+	}
+
+	/* start policy engine */
+	reg = readl(base + ccu_clk->policy_ctl_offset);
+	reg |= (POLICY_CTL_GO + POLICY_CTL_GO_ATL);
+	writel(reg, base + ccu_clk->policy_ctl_offset);
+
+	/* wait till started */
+	ret = wait_bit(base, ccu_clk->policy_ctl_offset, 0, 0);
+	if (ret)
+		return ret;
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Get the CCU clock rate */
+static unsigned long ccu_clk_get_rate(struct clk *c)
+{
+	struct ccu_clock *ccu_clk = to_ccu_clk(c);
+	debug("%s: %s\n", __func__, c->name);
+	c->rate = ccu_clk->freq_tbl[ccu_clk->freq_id];
+	return c->rate;
+}
+
+/* CCU clock operations */
+struct clk_ops ccu_clk_ops = {
+	.enable = ccu_clk_enable,
+	.get_rate = ccu_clk_get_rate,
+};
+
+/* Enable a bus clock */
+static int bus_clk_enable(struct clk *c, int enable)
+{
+	struct bus_clock *bus_clk = to_bus_clk(c);
+	struct bus_clk_data *cd = bus_clk->data;
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int ret = 0;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	/* enable gating */
+	reg = readl(base + cd->gate.offset);
+	if (!!(reg & (1 << cd->gate.status_bit)) == !!enable)
+		debug("%s already %s\n", c->name,
+		      enable ? "enabled" : "disabled");
+	else {
+		int want = (enable) ? 1 : 0;
+		reg |= (1 << cd->gate.hw_sw_sel_bit);
+
+		if (enable)
+			reg |= (1 << cd->gate.en_bit);
+		else
+			reg &= ~(1 << cd->gate.en_bit);
+
+		writel(reg, base + cd->gate.offset);
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit,
+			       want);
+		if (ret)
+			return ret;
+	}
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Get the rate of a bus clock */
+static unsigned long bus_clk_get_rate(struct clk *c)
+{
+	struct bus_clock *bus_clk = to_bus_clk(c);
+	struct ccu_clock *ccu_clk;
+
+	debug("%s: %s\n", __func__, c->name);
+	ccu_clk = to_ccu_clk(c->parent);
+
+	c->rate = bus_clk->freq_tbl[ccu_clk->freq_id];
+	c->div = ccu_clk->freq_tbl[ccu_clk->freq_id] / c->rate;
+	return c->rate;
+}
+
+/* Bus clock operations */
+struct clk_ops bus_clk_ops = {
+	.enable = bus_clk_enable,
+	.get_rate = bus_clk_get_rate,
+};
+
+/* Enable a reference clock */
+static int ref_clk_enable(struct clk *c, int enable)
+{
+	debug("%s: %s\n", __func__, c->name);
+	return 0;
+}
+
+/* Reference clock operations */
+struct clk_ops ref_clk_ops = {
+	.enable = ref_clk_enable,
+};
+
+/*
+ * clk.h implementation follows
+ */
+
+/* Initialize the clock framework */
+int clk_init(void)
+{
+	debug("%s:\n", __func__);
+	return 0;
+}
+
+/* Get a clock handle, give a name string */
+struct clk *clk_get(const char *con_id)
+{
+	int i;
+	struct clk_lookup *clk_tblp;
+
+	debug("%s: %s\n", __func__, con_id);
+
+	clk_tblp = arch_clk_tbl;
+	for (i = 0; i < arch_clk_tbl_array_size; i++, clk_tblp++) {
+		if (clk_tblp->con_id) {
+			if (!con_id || strcmp(clk_tblp->con_id, con_id))
+				continue;
+			return clk_tblp->clk;
+		}
+	}
+	return NULL;
+}
+
+/* Enable a clock */
+int clk_enable(struct clk *c)
+{
+	int ret = 0;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!c->ops || !c->ops->enable)
+		return -1;
+
+	/* enable parent clock first */
+	if (c->parent)
+		ret = clk_enable(c->parent);
+
+	if (ret)
+		return ret;
+
+	if (!c->use_cnt) {
+		c->use_cnt++;
+		ret = c->ops->enable(c, 1);
+	}
+
+	return ret;
+}
+
+/* Disable a clock */
+void clk_disable(struct clk *c)
+{
+	debug("%s: %s\n", __func__, c->name);
+	if (!c->ops || !c->ops->enable)
+		return;
+
+	if (c->use_cnt) {
+		c->use_cnt--;
+		c->ops->enable(c, 0);
+	}
+
+	/* disable parent */
+	if (c->parent)
+		clk_disable(c->parent);
+}
+
+/* Get the clock rate */
+unsigned long clk_get_rate(struct clk *c)
+{
+	unsigned long rate;
+
+	if (!c || !c->ops || !c->ops->get_rate)
+		return 0;
+	debug("%s: %s\n", __func__, c->name);
+
+	rate = c->ops->get_rate(c);
+	debug("%s: rate = %ld\n", __func__, rate);
+	return rate;
+}
+
+/* Set the clock rate */
+int clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret;
+
+	if (!c || !c->ops || !c->ops->set_rate)
+		return -EINVAL;
+	debug("%s: %s rate=%ld\n", __func__, c->name, rate);
+
+	if (c->use_cnt)
+		return -EINVAL;
+
+	ret = c->ops->set_rate(c, rate);
+
+	return ret;
+}
+
+/* Not required for this arch */
+/*
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_parent(struct clk *clk, struct clk *parent);
+struct clk *clk_get_parent(struct clk *clk);
+*/
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-core.h b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-core.h
new file mode 100644
index 000000000..f0fbff081
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-core.h
@@ -0,0 +1,491 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/stringify.h>
+
+#ifdef CONFIG_CLK_DEBUG
+#undef writel
+#undef readl
+static inline void writel(u32 val, void *addr)
+{
+	printf("Write [0x%p] = 0x%08x\n", addr, val);
+	*(u32 *)addr = val;
+}
+
+static inline u32 readl(void *addr)
+{
+	u32 val = *(u32 *)addr;
+	printf("Read  [0x%p] = 0x%08x\n", addr, val);
+	return val;
+}
+#endif
+
+struct clk;
+
+struct clk_lookup {
+	const char *dev_id;
+	const char *con_id;
+	struct clk *clk;
+};
+
+extern struct clk_lookup arch_clk_tbl[];
+extern unsigned int arch_clk_tbl_array_size;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @enable: enable/disable clock, see clk_enable() and clk_disable()
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ */
+struct clk_ops {
+	int (*enable) (struct clk *c, int enable);
+	int (*set_rate) (struct clk *c, unsigned long rate);
+	unsigned long (*get_rate) (struct clk *c);
+	unsigned long (*round_rate) (struct clk *c, unsigned long rate);
+	int (*set_parent) (struct clk *c, struct clk *parent);
+};
+
+struct clk {
+	struct clk *parent;
+	const char *name;
+	int use_cnt;
+	unsigned long rate;	/* in HZ */
+
+	/* programmable divider. 0 means fixed ratio to parent clock */
+	unsigned long div;
+
+	struct clk_src *src;
+	struct clk_ops *ops;
+
+	unsigned long ccu_clk_mgr_base;
+	int sel;
+};
+
+struct refclk *refclk_str_to_clk(const char *name);
+
+/* The common clock framework uses u8 to represent a parent index */
+#define PARENT_COUNT_MAX	((u32)U8_MAX)
+
+#define BAD_CLK_INDEX		U8_MAX	/* Can't ever be valid */
+#define BAD_CLK_NAME		((const char *)-1)
+
+#define BAD_SCALED_DIV_VALUE	U64_MAX
+
+/*
+ * Utility macros for object flag management.  If possible, flags
+ * should be defined such that 0 is the desired default value.
+ */
+#define FLAG(type, flag)		BCM_CLK_ ## type ## _FLAGS_ ## flag
+#define FLAG_SET(obj, type, flag)	((obj)->flags |= FLAG(type, flag))
+#define FLAG_CLEAR(obj, type, flag)	((obj)->flags &= ~(FLAG(type, flag)))
+#define FLAG_FLIP(obj, type, flag)	((obj)->flags ^= FLAG(type, flag))
+#define FLAG_TEST(obj, type, flag)	(!!((obj)->flags & FLAG(type, flag)))
+
+/* Clock field state tests */
+
+#define gate_exists(gate)		FLAG_TEST(gate, GATE, EXISTS)
+#define gate_is_enabled(gate)		FLAG_TEST(gate, GATE, ENABLED)
+#define gate_is_hw_controllable(gate)	FLAG_TEST(gate, GATE, HW)
+#define gate_is_sw_controllable(gate)	FLAG_TEST(gate, GATE, SW)
+#define gate_is_sw_managed(gate)	FLAG_TEST(gate, GATE, SW_MANAGED)
+#define gate_is_no_disable(gate)	FLAG_TEST(gate, GATE, NO_DISABLE)
+
+#define gate_flip_enabled(gate)		FLAG_FLIP(gate, GATE, ENABLED)
+
+#define divider_exists(div)		FLAG_TEST(div, DIV, EXISTS)
+#define divider_is_fixed(div)		FLAG_TEST(div, DIV, FIXED)
+#define divider_has_fraction(div)	(!divider_is_fixed(div) && \
+						(div)->frac_width > 0)
+
+#define selector_exists(sel)		((sel)->width != 0)
+#define trigger_exists(trig)		FLAG_TEST(trig, TRIG, EXISTS)
+
+/* Clock type, used to tell common block what it's part of */
+enum bcm_clk_type {
+	bcm_clk_none,		/* undefined clock type */
+	bcm_clk_bus,
+	bcm_clk_core,
+	bcm_clk_peri
+};
+
+/*
+ * Gating control and status is managed by a 32-bit gate register.
+ *
+ * There are several types of gating available:
+ * - (no gate)
+ *     A clock with no gate is assumed to be always enabled.
+ * - hardware-only gating (auto-gating)
+ *     Enabling or disabling clocks with this type of gate is
+ *     managed automatically by the hardware.  Such clocks can be
+ *     considered by the software to be enabled.  The current status
+ *     of auto-gated clocks can be read from the gate status bit.
+ * - software-only gating
+ *     Auto-gating is not available for this type of clock.
+ *     Instead, software manages whether it's enabled by setting or
+ *     clearing the enable bit.  The current gate status of a gate
+ *     under software control can be read from the gate status bit.
+ *     To ensure a change to the gating status is complete, the
+ *     status bit can be polled to verify that the gate has entered
+ *     the desired state.
+ * - selectable hardware or software gating
+ *     Gating for this type of clock can be configured to be either
+ *     under software or hardware control.  Which type is in use is
+ *     determined by the hw_sw_sel bit of the gate register.
+ */
+struct bcm_clk_gate {
+	u32 offset;		/* gate register offset */
+	u32 status_bit;		/* 0: gate is disabled; 0: gatge is enabled */
+	u32 en_bit;		/* 0: disable; 1: enable */
+	u32 hw_sw_sel_bit;	/* 0: hardware gating; 1: software gating */
+	u32 flags;		/* BCM_CLK_GATE_FLAGS_* below */
+};
+
+/*
+ * Gate flags:
+ *   HW         means this gate can be auto-gated
+ *   SW         means the state of this gate can be software controlled
+ *   NO_DISABLE means this gate is (only) enabled if under software control
+ *   SW_MANAGED means the status of this gate is under software control
+ *   ENABLED    means this software-managed gate is *supposed* to be enabled
+ */
+#define BCM_CLK_GATE_FLAGS_EXISTS	((u32)1 << 0)	/* Gate is valid */
+#define BCM_CLK_GATE_FLAGS_HW		((u32)1 << 1)	/* Can auto-gate */
+#define BCM_CLK_GATE_FLAGS_SW		((u32)1 << 2)	/* Software control */
+#define BCM_CLK_GATE_FLAGS_NO_DISABLE	((u32)1 << 3)	/* HW or enabled */
+#define BCM_CLK_GATE_FLAGS_SW_MANAGED	((u32)1 << 4)	/* SW now in control */
+#define BCM_CLK_GATE_FLAGS_ENABLED	((u32)1 << 5)	/* If SW_MANAGED */
+
+/*
+ * Gate initialization macros.
+ *
+ * Any gate initially under software control will be enabled.
+ */
+
+/* A hardware/software gate initially under software control */
+#define HW_SW_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, SW_MANAGED)|FLAG(GATE, ENABLED)|	\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware/software gate initially under hardware control */
+#define HW_SW_GATE_AUTO(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware-or-enabled gate (enabled if not under hardware control) */
+#define HW_ENABLE_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, NO_DISABLE)|FLAG(GATE, EXISTS),	\
+	}
+
+/* A software-only gate */
+#define SW_ONLY_GATE(_offset, _status_bit, _en_bit)			\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.flags = FLAG(GATE, SW)|FLAG(GATE, SW_MANAGED)|		\
+			FLAG(GATE, ENABLED)|FLAG(GATE, EXISTS),		\
+	}
+
+/* A hardware-only gate */
+#define HW_ONLY_GATE(_offset, _status_bit)				\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS),		\
+	}
+
+/*
+ * Each clock can have zero, one, or two dividers which change the
+ * output rate of the clock.  Each divider can be either fixed or
+ * variable.  If there are two dividers, they are the "pre-divider"
+ * and the "regular" or "downstream" divider.  If there is only one,
+ * there is no pre-divider.
+ *
+ * A fixed divider is any non-zero (positive) value, and it
+ * indicates how the input rate is affected by the divider.
+ *
+ * The value of a variable divider is maintained in a sub-field of a
+ * 32-bit divider register.  The position of the field in the
+ * register is defined by its offset and width.  The value recorded
+ * in this field is always 1 less than the value it represents.
+ *
+ * In addition, a variable divider can indicate that some subset
+ * of its bits represent a "fractional" part of the divider.  Such
+ * bits comprise the low-order portion of the divider field, and can
+ * be viewed as representing the portion of the divider that lies to
+ * the right of the decimal point.  Most variable dividers have zero
+ * fractional bits.  Variable dividers with non-zero fraction width
+ * still record a value 1 less than the value they represent; the
+ * added 1 does *not* affect the low-order bit in this case, it
+ * affects the bits above the fractional part only.  (Often in this
+ * code a divider field value is distinguished from the value it
+ * represents by referring to the latter as a "divisor".)
+ *
+ * In order to avoid dealing with fractions, divider arithmetic is
+ * performed using "scaled" values.  A scaled value is one that's
+ * been left-shifted by the fractional width of a divider.  Dividing
+ * a scaled value by a scaled divisor produces the desired quotient
+ * without loss of precision and without any other special handling
+ * for fractions.
+ *
+ * The recorded value of a variable divider can be modified.  To
+ * modify either divider (or both), a clock must be enabled (i.e.,
+ * using its gate).  In addition, a trigger register (described
+ * below) must be used to commit the change, and polled to verify
+ * the change is complete.
+ */
+struct bcm_clk_div {
+	union {
+		struct {	/* variable divider */
+			u32 offset;	/* divider register offset */
+			u32 shift;	/* field shift */
+			u32 width;	/* field width */
+			u32 frac_width;	/* field fraction width */
+
+			u64 scaled_div;	/* scaled divider value */
+		};
+		u32 fixed;	/* non-zero fixed divider value */
+	};
+	u32 flags;		/* BCM_CLK_DIV_FLAGS_* below */
+};
+
+/*
+ * Divider flags:
+ *   EXISTS means this divider exists
+ *   FIXED means it is a fixed-rate divider
+ */
+#define BCM_CLK_DIV_FLAGS_EXISTS	((u32)1 << 0)	/* Divider is valid */
+#define BCM_CLK_DIV_FLAGS_FIXED		((u32)1 << 1)	/* Fixed-value */
+
+/* Divider initialization macros */
+
+/* A fixed (non-zero) divider */
+#define FIXED_DIVIDER(_value)						\
+	{								\
+		.fixed = (_value),					\
+		.flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED),		\
+	}
+
+/* A divider with an integral divisor */
+#define DIVIDER(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/* A divider whose divisor has an integer and fractional part */
+#define FRAC_DIVIDER(_offset, _shift, _width, _frac_width)		\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.frac_width = (_frac_width),				\
+		.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/*
+ * Clocks may have multiple "parent" clocks.  If there is more than
+ * one, a selector must be specified to define which of the parent
+ * clocks is currently in use.  The selected clock is indicated in a
+ * sub-field of a 32-bit selector register.  The range of
+ * representable selector values typically exceeds the number of
+ * available parent clocks.  Occasionally the reset value of a
+ * selector field is explicitly set to a (specific) value that does
+ * not correspond to a defined input clock.
+ *
+ * We register all known parent clocks with the common clock code
+ * using a packed array (i.e., no empty slots) of (parent) clock
+ * names, and refer to them later using indexes into that array.
+ * We maintain an array of selector values indexed by common clock
+ * index values in order to map between these common clock indexes
+ * and the selector values used by the hardware.
+ *
+ * Like dividers, a selector can be modified, but to do so a clock
+ * must be enabled, and a trigger must be used to commit the change.
+ */
+struct bcm_clk_sel {
+	u32 offset;		/* selector register offset */
+	u32 shift;		/* field shift */
+	u32 width;		/* field width */
+
+	u32 parent_count;	/* number of entries in parent_sel[] */
+	u32 *parent_sel;	/* array of parent selector values */
+	u8 clk_index;		/* current selected index in parent_sel[] */
+};
+
+/* Selector initialization macro */
+#define SELECTOR(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.clk_index = BAD_CLK_INDEX,				\
+	}
+
+/*
+ * Making changes to a variable divider or a selector for a clock
+ * requires the use of a trigger.  A trigger is defined by a single
+ * bit within a register.  To signal a change, a 1 is written into
+ * that bit.  To determine when the change has been completed, that
+ * trigger bit is polled; the read value will be 1 while the change
+ * is in progress, and 0 when it is complete.
+ *
+ * Occasionally a clock will have more than one trigger.  In this
+ * case, the "pre-trigger" will be used when changing a clock's
+ * selector and/or its pre-divider.
+ */
+struct bcm_clk_trig {
+	u32 offset;		/* trigger register offset */
+	u32 bit;		/* trigger bit */
+	u32 flags;		/* BCM_CLK_TRIG_FLAGS_* below */
+};
+
+/*
+ * Trigger flags:
+ *   EXISTS means this trigger exists
+ */
+#define BCM_CLK_TRIG_FLAGS_EXISTS	((u32)1 << 0)	/* Trigger is valid */
+
+/* Trigger initialization macro */
+#define TRIGGER(_offset, _bit)						\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+		.flags = FLAG(TRIG, EXISTS),				\
+	}
+
+struct bus_clk_data {
+	struct bcm_clk_gate gate;
+};
+
+struct core_clk_data {
+	struct bcm_clk_gate gate;
+};
+
+struct peri_clk_data {
+	struct bcm_clk_gate gate;
+	struct bcm_clk_trig pre_trig;
+	struct bcm_clk_div pre_div;
+	struct bcm_clk_trig trig;
+	struct bcm_clk_div div;
+	struct bcm_clk_sel sel;
+	const char *clocks[];	/* must be last; use CLOCKS() to declare */
+};
+#define CLOCKS(...)	{ __VA_ARGS__, NULL, }
+#define NO_CLOCKS	{ NULL, }	/* Must use of no parent clocks */
+
+struct refclk {
+	struct clk clk;
+};
+
+struct peri_clock {
+	struct clk clk;
+	struct peri_clk_data *data;
+};
+
+struct ccu_clock {
+	struct clk clk;
+
+	int num_policy_masks;
+	unsigned long policy_freq_offset;
+	int freq_bit_shift;	/* 8 for most CCUs */
+	unsigned long policy_ctl_offset;
+	unsigned long policy0_mask_offset;
+	unsigned long policy1_mask_offset;
+	unsigned long policy2_mask_offset;
+	unsigned long policy3_mask_offset;
+	unsigned long policy0_mask2_offset;
+	unsigned long policy1_mask2_offset;
+	unsigned long policy2_mask2_offset;
+	unsigned long policy3_mask2_offset;
+	unsigned long lvm_en_offset;
+
+	int freq_id;
+	unsigned long *freq_tbl;
+};
+
+struct bus_clock {
+	struct clk clk;
+	struct bus_clk_data *data;
+	unsigned long *freq_tbl;
+};
+
+struct ref_clock {
+	struct clk clk;
+};
+
+static inline int is_same_clock(struct clk *a, struct clk *b)
+{
+	return (a == b);
+}
+
+#define to_clk(p) (&((p)->clk))
+#define name_to_clk(name) (&((name##_clk).clk))
+/* declare a struct clk_lookup */
+#define CLK_LK(name) \
+{.con_id = __stringify(name##_clk), .clk = name_to_clk(name),}
+
+static inline struct refclk *to_refclk(struct clk *clock)
+{
+	return container_of(clock, struct refclk, clk);
+}
+
+static inline struct peri_clock *to_peri_clk(struct clk *clock)
+{
+	return container_of(clock, struct peri_clock, clk);
+}
+
+static inline struct ccu_clock *to_ccu_clk(struct clk *clock)
+{
+	return container_of(clock, struct ccu_clock, clk);
+}
+
+static inline struct bus_clock *to_bus_clk(struct clk *clock)
+{
+	return container_of(clock, struct bus_clock, clk);
+}
+
+static inline struct ref_clock *to_ref_clk(struct clk *clock)
+{
+	return container_of(clock, struct ref_clock, clk);
+}
+
+extern struct clk_ops peri_clk_ops;
+extern struct clk_ops ccu_clk_ops;
+extern struct clk_ops bus_clk_ops;
+extern struct clk_ops ref_clk_ops;
+
+extern int clk_get_and_enable(char *clkstr);
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-eth.c b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-eth.c
new file mode 100644
index 000000000..209ceca9a
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-eth.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define WR_ACCESS_ADDR			ESUB_CLK_BASE_ADDR
+#define WR_ACCESS_PASSWORD				0xA5A500
+
+#define PLLE_POST_RESETB_ADDR		(ESUB_CLK_BASE_ADDR + 0x00000C00)
+
+#define PLLE_RESETB_ADDR		(ESUB_CLK_BASE_ADDR + 0x00000C58)
+#define PLLE_RESETB_I_PLL_RESETB_PLLE_MASK		0x00010000
+#define PLLE_POST_RESETB_I_POST_RESETB_PLLE_MASK	0x00000001
+
+#define PLL_LOCK_ADDR			(ESUB_CLK_BASE_ADDR + 0x00000C38)
+#define PLL_LOCK_PLL_LOCK_PLLE_MASK			0x00000001
+
+#define ESW_SYS_DIV_ADDR		(ESUB_CLK_BASE_ADDR + 0x00000A04)
+#define ESW_SYS_DIV_PLL_SELECT_MASK			0x00000300
+#define ESW_SYS_DIV_DIV_MASK				0x0000001C
+#define ESW_SYS_DIV_PLL_VAR_208M_CLK_SELECT		0x00000100
+#define ESW_SYS_DIV_DIV_SELECT				0x4
+#define ESW_SYS_DIV_TRIGGER_MASK			0x00000001
+
+#define ESUB_AXI_DIV_DEBUG_ADDR		(ESUB_CLK_BASE_ADDR + 0x00000E04)
+#define ESUB_AXI_DIV_DEBUG_PLL_SELECT_MASK		0x0000001C
+#define ESUB_AXI_DIV_DEBUG_PLL_SELECT_OVERRIDE_MASK	0x00000040
+#define ESUB_AXI_DIV_DEBUG_PLL_VAR_208M_CLK_SELECT	0x0
+#define ESUB_AXI_DIV_DEBUG_TRIGGER_MASK			0x00000001
+
+#define PLL_MAX_RETRY	100
+
+/* Enable appropriate clocks for Ethernet */
+int clk_eth_enable(void)
+{
+	int rc = -1;
+	int retry_count = 0;
+	rc = clk_get_and_enable("esub_ccu_clk");
+
+	/* Enable Access to CCU registers */
+	writel((1 | WR_ACCESS_PASSWORD), WR_ACCESS_ADDR);
+
+	writel(readl(PLLE_POST_RESETB_ADDR) &
+	       ~PLLE_POST_RESETB_I_POST_RESETB_PLLE_MASK,
+	       PLLE_POST_RESETB_ADDR);
+
+	/* Take PLL out of reset and put into normal mode */
+	writel(readl(PLLE_RESETB_ADDR) | PLLE_RESETB_I_PLL_RESETB_PLLE_MASK,
+	       PLLE_RESETB_ADDR);
+
+	/* Wait for PLL lock */
+	rc = -1;
+	while (retry_count < PLL_MAX_RETRY) {
+		udelay(100);
+		if (readl(PLL_LOCK_ADDR) & PLL_LOCK_PLL_LOCK_PLLE_MASK) {
+			rc = 0;
+			break;
+		}
+		retry_count++;
+	}
+
+	if (rc == -1) {
+		printf("%s: ETH-PLL lock timeout, Ethernet is not enabled!\n",
+		       __func__);
+		return -1;
+	}
+
+	writel(readl(PLLE_POST_RESETB_ADDR) |
+	       PLLE_POST_RESETB_I_POST_RESETB_PLLE_MASK,
+	       PLLE_POST_RESETB_ADDR);
+
+	/* Switch esw_sys_clk to use 104MHz(208MHz/2) clock */
+	writel((readl(ESW_SYS_DIV_ADDR) &
+		~(ESW_SYS_DIV_PLL_SELECT_MASK | ESW_SYS_DIV_DIV_MASK)) |
+	       ESW_SYS_DIV_PLL_VAR_208M_CLK_SELECT | ESW_SYS_DIV_DIV_SELECT,
+	       ESW_SYS_DIV_ADDR);
+
+	writel(readl(ESW_SYS_DIV_ADDR) | ESW_SYS_DIV_TRIGGER_MASK,
+	       ESW_SYS_DIV_ADDR);
+
+	/* Wait for trigger complete */
+	rc = -1;
+	retry_count = 0;
+	while (retry_count < PLL_MAX_RETRY) {
+		udelay(100);
+		if (!(readl(ESW_SYS_DIV_ADDR) & ESW_SYS_DIV_TRIGGER_MASK)) {
+			rc = 0;
+			break;
+		}
+		retry_count++;
+	}
+
+	if (rc == -1) {
+		printf("%s: SYS CLK Trigger timeout, Ethernet is not enabled!\n",
+		       __func__);
+		return -1;
+	}
+
+	/* switch Esub AXI clock to 208MHz */
+	writel((readl(ESUB_AXI_DIV_DEBUG_ADDR) &
+		~(ESUB_AXI_DIV_DEBUG_PLL_SELECT_MASK |
+		  ESUB_AXI_DIV_DEBUG_PLL_SELECT_OVERRIDE_MASK |
+		  ESUB_AXI_DIV_DEBUG_TRIGGER_MASK)) |
+	       ESUB_AXI_DIV_DEBUG_PLL_VAR_208M_CLK_SELECT |
+	       ESUB_AXI_DIV_DEBUG_PLL_SELECT_OVERRIDE_MASK,
+	       ESUB_AXI_DIV_DEBUG_ADDR);
+
+	writel(readl(ESUB_AXI_DIV_DEBUG_ADDR) |
+	       ESUB_AXI_DIV_DEBUG_TRIGGER_MASK,
+	       ESUB_AXI_DIV_DEBUG_ADDR);
+
+	/* Wait for trigger complete */
+	rc = -1;
+	retry_count = 0;
+	while (retry_count < PLL_MAX_RETRY) {
+		udelay(100);
+		if (!(readl(ESUB_AXI_DIV_DEBUG_ADDR) &
+		      ESUB_AXI_DIV_DEBUG_TRIGGER_MASK)) {
+			rc = 0;
+			break;
+		}
+		retry_count++;
+	}
+
+	if (rc == -1) {
+		printf("%s: AXI CLK Trigger timeout, Ethernet is not enabled!\n",
+		       __func__);
+		return -1;
+	}
+
+	/* Disable Access to CCU registers */
+	writel(WR_ACCESS_PASSWORD, WR_ACCESS_ADDR);
+
+	return rc;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c
new file mode 100644
index 000000000..f2ba354c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for an SDIO port */
+int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	int ret;
+	struct clk *c;
+
+	char *clkstr;
+	char *slpstr;
+	char *ahbstr;
+
+	switch ((u32) base) {
+	case CONFIG_SYS_SDIO_BASE0:
+		clkstr = CONFIG_SYS_SDIO0 "_clk";
+		ahbstr = CONFIG_SYS_SDIO0 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO0 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE1:
+		clkstr = CONFIG_SYS_SDIO1 "_clk";
+		ahbstr = CONFIG_SYS_SDIO1 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO1 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE2:
+		clkstr = CONFIG_SYS_SDIO2 "_clk";
+		ahbstr = CONFIG_SYS_SDIO2 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO2 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE3:
+		clkstr = CONFIG_SYS_SDIO3 "_clk";
+		ahbstr = CONFIG_SYS_SDIO3 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO3 "_sleep_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	ret = clk_get_and_enable(ahbstr);
+	if (ret)
+		return ret;
+
+	ret = clk_get_and_enable(slpstr);
+	if (ret)
+		return ret;
+
+	c = clk_get(clkstr);
+	if (c) {
+		ret = clk_set_rate(c, rate);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(c);
+		if (ret)
+			return ret;
+	} else {
+		printf("%s: Couldn't find %s\n", __func__, clkstr);
+		return -EINVAL;
+	}
+	*actual_ratep = rate;
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
new file mode 100644
index 000000000..f604aec62
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <linux/errno.h>
+#include <asm/arch/sysmap.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for the USB OTG port */
+int clk_usb_otg_enable(void *base)
+{
+	char *ahbstr;
+
+	switch ((u32) base) {
+	case HSOTG_BASE_ADDR:
+		ahbstr = "usb_otg_ahb_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	return clk_get_and_enable(ahbstr);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/reset.c b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/reset.c
new file mode 100644
index 000000000..1491e5c88
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcm281xx/reset.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/sysmap.h>
+
+#define EN_MASK		0x08000000	/* Enable timer */
+#define SRSTEN_MASK	0x04000000	/* Enable soft reset */
+#define CLKS_SHIFT	20		/* Clock period shift */
+#define LD_SHIFT	0		/* Reload value shift */
+
+void reset_cpu(void)
+{
+	/*
+	 * Set WD enable, RST enable,
+	 * 3.9 msec clock period (8), reload value (8*3.9ms)
+	 */
+	u32 reg = EN_MASK + SRSTEN_MASK + (8 << CLKS_SHIFT) + (8 << LD_SHIFT);
+	writel(reg, SECWD2_BASE_ADDR);
+
+	while (1)
+		;	/* loop forever till reset */
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcmcygnus/Makefile b/roms/u-boot/arch/arm/cpu/armv7/bcmcygnus/Makefile
new file mode 100644
index 000000000..3496bcd2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcmcygnus/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2014 Broadcom Corporation.
+
+obj-y	+= reset.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcmcygnus/reset.c b/roms/u-boot/arch/arm/cpu/armv7/bcmcygnus/reset.c
new file mode 100644
index 000000000..63992fd87
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcmcygnus/reset.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+
+#define CRMU_MAIL_BOX1		0x03024028
+#define CRMU_SOFT_RESET_CMD	0xFFFFFFFF
+
+void reset_cpu(void)
+{
+	/* Send soft reset command via Mailbox. */
+	writel(CRMU_SOFT_RESET_CMD, CRMU_MAIL_BOX1);
+
+	while (1)
+		;	/* loop forever till reset */
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcmnsp/Makefile b/roms/u-boot/arch/arm/cpu/armv7/bcmnsp/Makefile
new file mode 100644
index 000000000..3496bcd2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcmnsp/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2014 Broadcom Corporation.
+
+obj-y	+= reset.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7/bcmnsp/reset.c b/roms/u-boot/arch/arm/cpu/armv7/bcmnsp/reset.c
new file mode 100644
index 000000000..a3137752e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/bcmnsp/reset.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+
+#define CRU_RESET_OFFSET	0x1803F184
+
+void reset_cpu(void)
+{
+	/* Reset the cpu by setting software reset request bit */
+	writel(0x1, CRU_RESET_OFFSET);
+
+	while (1)
+		;	/* loop forever till reset */
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/cache_v7.c b/roms/u-boot/arch/arm/cpu/armv7/cache_v7.c
new file mode 100644
index 000000000..19ff43235
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/cache_v7.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ */
+#include <cpu_func.h>
+#include <asm/cache.h>
+#include <linux/types.h>
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/utils.h>
+
+#define ARMV7_DCACHE_INVAL_RANGE	1
+#define ARMV7_DCACHE_CLEAN_INVAL_RANGE	2
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+
+/* Asm functions from cache_v7_asm.S */
+void v7_flush_dcache_all(void);
+void v7_invalidate_dcache_all(void);
+
+static u32 get_ccsidr(void)
+{
+	u32 ccsidr;
+
+	/* Read current CP15 Cache Size ID Register */
+	asm volatile ("mrc p15, 1, %0, c0, c0, 0" : "=r" (ccsidr));
+	return ccsidr;
+}
+
+static void v7_dcache_clean_inval_range(u32 start, u32 stop, u32 line_len)
+{
+	u32 mva;
+
+	/* Align start to cache line boundary */
+	start &= ~(line_len - 1);
+	for (mva = start; mva < stop; mva = mva + line_len) {
+		/* DCCIMVAC - Clean & Invalidate data cache by MVA to PoC */
+		asm volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" (mva));
+	}
+}
+
+static void v7_dcache_inval_range(u32 start, u32 stop, u32 line_len)
+{
+	u32 mva;
+
+	if (!check_cache_range(start, stop))
+		return;
+
+	for (mva = start; mva < stop; mva = mva + line_len) {
+		/* DCIMVAC - Invalidate data cache by MVA to PoC */
+		asm volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" (mva));
+	}
+}
+
+static void v7_dcache_maint_range(u32 start, u32 stop, u32 range_op)
+{
+	u32 line_len, ccsidr;
+
+	ccsidr = get_ccsidr();
+	line_len = ((ccsidr & CCSIDR_LINE_SIZE_MASK) >>
+			CCSIDR_LINE_SIZE_OFFSET) + 2;
+	/* Converting from words to bytes */
+	line_len += 2;
+	/* converting from log2(linelen) to linelen */
+	line_len = 1 << line_len;
+
+	switch (range_op) {
+	case ARMV7_DCACHE_CLEAN_INVAL_RANGE:
+		v7_dcache_clean_inval_range(start, stop, line_len);
+		break;
+	case ARMV7_DCACHE_INVAL_RANGE:
+		v7_dcache_inval_range(start, stop, line_len);
+		break;
+	}
+
+	/* DSB to make sure the operation is complete */
+	dsb();
+}
+
+/* Invalidate TLB */
+static void v7_inval_tlb(void)
+{
+	/* Invalidate entire unified TLB */
+	asm volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+	/* Invalidate entire data TLB */
+	asm volatile ("mcr p15, 0, %0, c8, c6, 0" : : "r" (0));
+	/* Invalidate entire instruction TLB */
+	asm volatile ("mcr p15, 0, %0, c8, c5, 0" : : "r" (0));
+	/* Full system DSB - make sure that the invalidation is complete */
+	dsb();
+	/* Full system ISB - make sure the instruction stream sees it */
+	isb();
+}
+
+void invalidate_dcache_all(void)
+{
+	v7_invalidate_dcache_all();
+
+	v7_outer_cache_inval_all();
+}
+
+/*
+ * Performs a clean & invalidation of the entire data cache
+ * at all levels
+ */
+void flush_dcache_all(void)
+{
+	v7_flush_dcache_all();
+
+	v7_outer_cache_flush_all();
+}
+
+/*
+ * Invalidates range in all levels of D-cache/unified cache used:
+ * Affects the range [start, stop - 1]
+ */
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+	check_cache_range(start, stop);
+
+	v7_dcache_maint_range(start, stop, ARMV7_DCACHE_INVAL_RANGE);
+
+	v7_outer_cache_inval_range(start, stop);
+}
+
+/*
+ * Flush range(clean & invalidate) from all levels of D-cache/unified
+ * cache used:
+ * Affects the range [start, stop - 1]
+ */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	check_cache_range(start, stop);
+
+	v7_dcache_maint_range(start, stop, ARMV7_DCACHE_CLEAN_INVAL_RANGE);
+
+	v7_outer_cache_flush_range(start, stop);
+}
+
+void arm_init_before_mmu(void)
+{
+	v7_outer_cache_enable();
+	invalidate_dcache_all();
+	v7_inval_tlb();
+}
+
+void mmu_page_table_flush(unsigned long start, unsigned long stop)
+{
+	flush_dcache_range(start, stop);
+	v7_inval_tlb();
+}
+#else /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void arm_init_before_mmu(void)
+{
+}
+
+void mmu_page_table_flush(unsigned long start, unsigned long stop)
+{
+}
+
+#endif /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+/* Invalidate entire I-cache and branch predictor array */
+void invalidate_icache_all(void)
+{
+	/*
+	 * Invalidate all instruction caches to PoU.
+	 * Also flushes branch target cache.
+	 */
+	asm volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+	/* Invalidate entire branch predictor array */
+	asm volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+
+	/* Full system DSB - make sure that the invalidation is complete */
+	dsb();
+
+	/* ISB - make sure the instruction stream sees it */
+	isb();
+}
+#else
+void invalidate_icache_all(void)
+{
+}
+#endif
+
+/*  Stub implementations for outer cache operations */
+__weak void v7_outer_cache_enable(void) {}
+__weak void v7_outer_cache_disable(void) {}
+__weak void v7_outer_cache_flush_all(void) {}
+__weak void v7_outer_cache_inval_all(void) {}
+__weak void v7_outer_cache_flush_range(u32 start, u32 end) {}
+__weak void v7_outer_cache_inval_range(u32 start, u32 end) {}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/cache_v7_asm.S b/roms/u-boot/arch/arm/cpu/armv7/cache_v7_asm.S
new file mode 100644
index 000000000..e38d72f87
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/cache_v7_asm.S
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <linux/sizes.h>
+#include <asm/system.h>
+
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+#define ARM(x...)
+#define THUMB(x...)	x
+#else
+#define ARM(x...)	x
+#define THUMB(x...)
+#endif
+
+/*
+ *	v7_flush_dcache_all()
+ *
+ *	Flush the whole D-cache.
+ *
+ *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
+ *
+ *	Note: copied from arch/arm/mm/cache-v7.S of Linux 4.4
+ */
+ENTRY(__v7_flush_dcache_all)
+	dmb					@ ensure ordering with previous memory accesses
+	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
+	mov	r3, r0, lsr #23			@ move LoC into position
+	ands	r3, r3, #7 << 1			@ extract LoC*2 from clidr
+	beq	finished			@ if loc is 0, then no need to clean
+start_flush_levels:
+	mov	r10, #0				@ start clean at cache level 0
+flush_levels:
+	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
+	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
+	and	r1, r1, #7			@ mask of the bits for current cache only
+	cmp	r1, #2				@ see what cache we have at this level
+	blt	skip				@ skip if no cache, or just i-cache
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	isb					@ isb to sych the new cssr&csidr
+	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
+	and	r2, r1, #7			@ extract the length of the cache lines
+	add	r2, r2, #4			@ add 4 (line length offset)
+	movw	r4, #0x3ff
+	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
+	clz	r5, r4				@ find bit position of way size increment
+	movw	r7, #0x7fff
+	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+loop1:
+	mov	r9, r7				@ create working copy of max index
+loop2:
+ ARM(	orr	r11, r10, r4, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r4, r5		)
+ THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
+ ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r9, r2		)
+ THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
+	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
+	subs	r9, r9, #1			@ decrement the index
+	bge	loop2
+	subs	r4, r4, #1			@ decrement the way
+	bge	loop1
+skip:
+	add	r10, r10, #2			@ increment cache number
+	cmp	r3, r10
+	bgt	flush_levels
+finished:
+	mov	r10, #0				@ swith back to cache level 0
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	dsb	st
+	isb
+	bx	lr
+ENDPROC(__v7_flush_dcache_all)
+
+ENTRY(v7_flush_dcache_all)
+ ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
+	bl	__v7_flush_dcache_all
+ ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
+	bx	lr
+ENDPROC(v7_flush_dcache_all)
+
+/*
+ *	v7_invalidate_dcache_all()
+ *
+ *	Invalidate the whole D-cache.
+ *
+ *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
+ *
+ *	Note: copied from __v7_flush_dcache_all above with
+ *	mcr     p15, 0, r11, c7, c14, 2
+ *	Replaced with:
+ *	mcr     p15, 0, r11, c7, c6, 2
+ */
+ENTRY(__v7_invalidate_dcache_all)
+	dmb					@ ensure ordering with previous memory accesses
+	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
+	mov	r3, r0, lsr #23			@ move LoC into position
+	ands	r3, r3, #7 << 1			@ extract LoC*2 from clidr
+	beq	inval_finished			@ if loc is 0, then no need to clean
+	mov	r10, #0				@ start clean at cache level 0
+inval_levels:
+	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
+	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
+	and	r1, r1, #7			@ mask of the bits for current cache only
+	cmp	r1, #2				@ see what cache we have at this level
+	blt	inval_skip			@ skip if no cache, or just i-cache
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	isb					@ isb to sych the new cssr&csidr
+	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
+	and	r2, r1, #7			@ extract the length of the cache lines
+	add	r2, r2, #4			@ add 4 (line length offset)
+	movw	r4, #0x3ff
+	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
+	clz	r5, r4				@ find bit position of way size increment
+	movw	r7, #0x7fff
+	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+inval_loop1:
+	mov	r9, r7				@ create working copy of max index
+inval_loop2:
+ ARM(	orr	r11, r10, r4, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r4, r5		)
+ THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
+ ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r9, r2		)
+ THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
+	mcr	p15, 0, r11, c7, c6, 2		@ invalidate by set/way
+	subs	r9, r9, #1			@ decrement the index
+	bge	inval_loop2
+	subs	r4, r4, #1			@ decrement the way
+	bge	inval_loop1
+inval_skip:
+	add	r10, r10, #2			@ increment cache number
+	cmp	r3, r10
+	bgt	inval_levels
+inval_finished:
+	mov	r10, #0				@ swith back to cache level 0
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	dsb	st
+	isb
+	bx	lr
+ENDPROC(__v7_invalidate_dcache_all)
+
+ENTRY(v7_invalidate_dcache_all)
+ ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
+	bl	__v7_invalidate_dcache_all
+ ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
+	bx	lr
+ENDPROC(v7_invalidate_dcache_all)
diff --git a/roms/u-boot/arch/arm/cpu/armv7/config.mk b/roms/u-boot/arch/arm/cpu/armv7/config.mk
new file mode 100644
index 000000000..68036d6fb
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/config.mk
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+
+# On supported platforms we set the bit which causes us to trap on unaligned
+# memory access.  This is the opposite of what the compiler expects to be
+# the default so we must pass in -mno-unaligned-access so that it is aware
+# of our decision.
+PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
diff --git a/roms/u-boot/arch/arm/cpu/armv7/cp15.c b/roms/u-boot/arch/arm/cpu/armv7/cp15.c
new file mode 100644
index 000000000..0ac4e7ba8
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/cp15.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015 Texas Insturments
+ */
+
+/*
+ * CP15 specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <asm/armv7.h>
+#include <linux/compiler.h>
+
+void __weak v7_arch_cp15_set_l2aux_ctrl(u32 l2actlr, u32 cpu_midr,
+				     u32 cpu_rev_comb, u32 cpu_variant,
+				     u32 cpu_rev)
+{
+	asm volatile ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(l2actlr));
+}
+
+void __weak v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+				 u32 cpu_variant, u32 cpu_rev)
+{
+	asm volatile ("mcr p15, 0, %0, c1, c0, 1\n\t" : : "r"(acr));
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/cpu.c b/roms/u-boot/arch/arm/cpu/armv7/cpu.c
new file mode 100644
index 000000000..68807d209
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/cpu.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2008 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <asm/armv7.h>
+#include <linux/compiler.h>
+
+void __weak cpu_cache_initialization(void){}
+
+int cleanup_before_linux_select(int flags)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+#ifndef CONFIG_SPL_BUILD
+	disable_interrupts();
+#endif
+
+	if (flags & CBL_DISABLE_CACHES) {
+		/*
+		* turn off D-cache
+		* dcache_disable() in turn flushes the d-cache and disables MMU
+		*/
+		dcache_disable();
+		v7_outer_cache_disable();
+
+		/*
+		* After D-cache is flushed and before it is disabled there may
+		* be some new valid entries brought into the cache. We are
+		* sure that these lines are not dirty and will not affect our
+		* execution. (because unwinding the call-stack and setting a
+		* bit in CP15 SCTRL is all we did during this. We have not
+		* pushed anything on to the stack. Neither have we affected
+		* any static data) So just invalidate the entire d-cache again
+		* to avoid coherency problems for kernel
+		*/
+		invalidate_dcache_all();
+
+		icache_disable();
+		invalidate_icache_all();
+	} else {
+		/*
+		 * Turn off I-cache and invalidate it
+		 */
+		icache_disable();
+		invalidate_icache_all();
+
+		flush_dcache_all();
+		invalidate_icache_all();
+		icache_enable();
+	}
+
+	/*
+	 * Some CPU need more cache attention before starting the kernel.
+	 */
+	cpu_cache_initialization();
+
+	return 0;
+}
+
+int cleanup_before_linux(void)
+{
+	return cleanup_before_linux_select(CBL_ALL);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/exception_level.c b/roms/u-boot/arch/arm/cpu/armv7/exception_level.c
new file mode 100644
index 000000000..f6d25bb68
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/exception_level.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Switch to non-secure mode
+ *
+ * Copyright (c) 2018 Heinrich Schuchardt
+ *
+ * This module contains the ARMv7 specific code required for leaving the
+ * secure mode before booting an operating system.
+ */
+
+#include <common.h>
+#include <bootm.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <asm/armv7.h>
+#include <asm/secure.h>
+#include <asm/setjmp.h>
+
+/**
+ * entry_non_secure() - entry point when switching to non-secure mode
+ *
+ * When switching to non-secure mode switch_to_non_secure_mode() calls this
+ * function passing a jump buffer. We use this jump buffer to restore the
+ * original stack and register state.
+ *
+ * @non_secure_jmp:	jump buffer for restoring stack and registers
+ */
+static void entry_non_secure(struct jmp_buf_data *non_secure_jmp)
+{
+	dcache_enable();
+	debug("Reached non-secure mode\n");
+
+	/* Restore stack and registers saved in switch_to_non_secure_mode() */
+	longjmp(non_secure_jmp, 1);
+}
+
+/**
+ * switch_to_non_secure_mode() - switch to non-secure mode
+ *
+ * Operating systems may expect to run in non-secure mode. Here we check if
+ * we are running in secure mode and switch to non-secure mode if necessary.
+ */
+void switch_to_non_secure_mode(void)
+{
+	static bool is_nonsec;
+	struct jmp_buf_data non_secure_jmp;
+
+	if (armv7_boot_nonsec() && !is_nonsec) {
+		if (setjmp(&non_secure_jmp))
+			return;
+		dcache_disable();	/* flush cache before switch to HYP */
+		armv7_init_nonsec();
+		is_nonsec = true;
+		secure_ram_addr(_do_nonsec_entry)(entry_non_secure,
+						  (uintptr_t)&non_secure_jmp,
+						  0, 0);
+	}
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/iproc-common/Makefile b/roms/u-boot/arch/arm/cpu/armv7/iproc-common/Makefile
new file mode 100644
index 000000000..6f5c837a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/iproc-common/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2014 Broadcom Corporation.
+
+obj-y	+= armpll.o
+obj-y	+= hwinit-common.o
+obj-y	+= timer.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7/iproc-common/armpll.c b/roms/u-boot/arch/arm/cpu/armv7/iproc-common/armpll.c
new file mode 100644
index 000000000..efa3d9e5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/iproc-common/armpll.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/iproc-common/armpll.h>
+#include <asm/iproc-common/sysmap.h>
+
+#define NELEMS(x)	(sizeof(x) / sizeof(x[0]))
+
+struct armpll_parameters {
+	unsigned int mode;
+	unsigned int ndiv_int;
+	unsigned int ndiv_frac;
+	unsigned int pdiv;
+	unsigned int freqid;
+};
+
+struct armpll_parameters armpll_clk_tab[] = {
+	{   25, 64,      1, 1, 0},
+	{  100, 64,      1, 1, 2},
+	{  400, 64,      1, 1, 6},
+	{  448, 71, 713050, 1, 6},
+	{  500, 80,      1, 1, 6},
+	{  560, 89, 629145, 1, 6},
+	{  600, 96,      1, 1, 6},
+	{  800, 64,      1, 1, 7},
+	{  896, 71, 713050, 1, 7},
+	{ 1000, 80,      1, 1, 7},
+	{ 1100, 88,      1, 1, 7},
+	{ 1120, 89, 629145, 1, 7},
+	{ 1200, 96,      1, 1, 7},
+};
+
+uint32_t armpll_config(uint32_t clkmhz)
+{
+	uint32_t freqid;
+	uint32_t ndiv_frac;
+	uint32_t pll;
+	uint32_t status = 1;
+	uint32_t timeout_countdown;
+	int i;
+
+	for (i = 0; i < NELEMS(armpll_clk_tab); i++) {
+		if (armpll_clk_tab[i].mode == clkmhz) {
+			status = 0;
+			break;
+		}
+	}
+
+	if (status) {
+		printf("Error: Clock configuration not supported\n");
+		goto armpll_config_done;
+	}
+
+	/* Enable write access */
+	writel(IPROC_REG_WRITE_ACCESS, IHOST_PROC_CLK_WR_ACCESS);
+
+	if (clkmhz == 25)
+		freqid = 0;
+	else
+		freqid = 2;
+
+	/* Bypass ARM clock and run on sysclk */
+	writel(1 << IHOST_PROC_CLK_POLICY_FREQ__PRIV_ACCESS_MODE |
+	       freqid << IHOST_PROC_CLK_POLICY_FREQ__POLICY3_FREQ_R |
+	       freqid << IHOST_PROC_CLK_POLICY_FREQ__POLICY2_FREQ_R |
+	       freqid << IHOST_PROC_CLK_POLICY_FREQ__POLICY1_FREQ_R |
+	       freqid << IHOST_PROC_CLK_POLICY_FREQ__POLICY0_FREQ_R,
+	       IHOST_PROC_CLK_POLICY_FREQ);
+
+	writel(1 << IHOST_PROC_CLK_POLICY_CTL__GO |
+	       1 << IHOST_PROC_CLK_POLICY_CTL__GO_AC,
+	       IHOST_PROC_CLK_POLICY_CTL);
+
+	/* Poll CCU until operation complete */
+	timeout_countdown = 0x100000;
+	while (readl(IHOST_PROC_CLK_POLICY_CTL) &
+	       (1 << IHOST_PROC_CLK_POLICY_CTL__GO)) {
+		timeout_countdown--;
+		if (timeout_countdown == 0) {
+			printf("CCU polling timedout\n");
+			status = 1;
+			goto armpll_config_done;
+		}
+	}
+
+	if (clkmhz == 25 || clkmhz == 100) {
+		status = 0;
+		goto armpll_config_done;
+	}
+
+	/* Now it is safe to program the PLL */
+	pll = readl(IHOST_PROC_CLK_PLLARMB);
+	pll &= ~((1 << IHOST_PROC_CLK_PLLARMB__PLLARM_NDIV_FRAC_WIDTH) - 1);
+	ndiv_frac =
+		((1 << IHOST_PROC_CLK_PLLARMB__PLLARM_NDIV_FRAC_WIDTH) - 1) &
+		 (armpll_clk_tab[i].ndiv_frac <<
+		 IHOST_PROC_CLK_PLLARMB__PLLARM_NDIV_FRAC_R);
+	pll |= ndiv_frac;
+	writel(pll, IHOST_PROC_CLK_PLLARMB);
+
+	writel(1 << IHOST_PROC_CLK_PLLARMA__PLLARM_LOCK |
+	       armpll_clk_tab[i].ndiv_int <<
+			IHOST_PROC_CLK_PLLARMA__PLLARM_NDIV_INT_R |
+	       armpll_clk_tab[i].pdiv <<
+			IHOST_PROC_CLK_PLLARMA__PLLARM_PDIV_R |
+	       1 << IHOST_PROC_CLK_PLLARMA__PLLARM_SOFT_RESETB,
+	       IHOST_PROC_CLK_PLLARMA);
+
+	/* Poll ARM PLL Lock until operation complete */
+	timeout_countdown = 0x100000;
+	while (readl(IHOST_PROC_CLK_PLLARMA) &
+	       (1 << IHOST_PROC_CLK_PLLARMA__PLLARM_LOCK)) {
+		timeout_countdown--;
+		if (timeout_countdown == 0) {
+			printf("ARM PLL lock failed\n");
+			status = 1;
+			goto armpll_config_done;
+		}
+	}
+
+	pll = readl(IHOST_PROC_CLK_PLLARMA);
+	pll |= (1 << IHOST_PROC_CLK_PLLARMA__PLLARM_SOFT_POST_RESETB);
+	writel(pll, IHOST_PROC_CLK_PLLARMA);
+
+	/* Set the policy */
+	writel(1 << IHOST_PROC_CLK_POLICY_FREQ__PRIV_ACCESS_MODE |
+	       armpll_clk_tab[i].freqid <<
+			IHOST_PROC_CLK_POLICY_FREQ__POLICY3_FREQ_R |
+	       armpll_clk_tab[i].freqid <<
+			IHOST_PROC_CLK_POLICY_FREQ__POLICY2_FREQ_R |
+	       armpll_clk_tab[i].freqid <<
+			IHOST_PROC_CLK_POLICY_FREQ__POLICY1_FREQ_R |
+	       armpll_clk_tab[i+4].freqid <<
+			IHOST_PROC_CLK_POLICY_FREQ__POLICY0_FREQ_R,
+	       IHOST_PROC_CLK_POLICY_FREQ);
+
+	writel(IPROC_CLKCT_HDELAY_SW_EN, IHOST_PROC_CLK_CORE0_CLKGATE);
+	writel(IPROC_CLKCT_HDELAY_SW_EN, IHOST_PROC_CLK_CORE1_CLKGATE);
+	writel(IPROC_CLKCT_HDELAY_SW_EN, IHOST_PROC_CLK_ARM_SWITCH_CLKGATE);
+	writel(IPROC_CLKCT_HDELAY_SW_EN, IHOST_PROC_CLK_ARM_PERIPH_CLKGATE);
+	writel(IPROC_CLKCT_HDELAY_SW_EN, IHOST_PROC_CLK_APB0_CLKGATE);
+
+	writel(1 << IHOST_PROC_CLK_POLICY_CTL__GO |
+	       1 << IHOST_PROC_CLK_POLICY_CTL__GO_AC,
+	       IHOST_PROC_CLK_POLICY_CTL);
+
+	/* Poll CCU until operation complete */
+	timeout_countdown = 0x100000;
+	while (readl(IHOST_PROC_CLK_POLICY_CTL) &
+	       (1 << IHOST_PROC_CLK_POLICY_CTL__GO)) {
+		timeout_countdown--;
+		if (timeout_countdown == 0) {
+			printf("CCU polling failed\n");
+			status = 1;
+			goto armpll_config_done;
+		}
+	}
+
+	status = 0;
+armpll_config_done:
+	/* Disable access to PLL registers */
+	writel(0, IHOST_PROC_CLK_WR_ACCESS);
+
+	return status;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/iproc-common/hwinit-common.c b/roms/u-boot/arch/arm/cpu/armv7/iproc-common/hwinit-common.c
new file mode 100644
index 000000000..896d2f956
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/iproc-common/hwinit-common.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/cache.h>
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/iproc-common/timer.c b/roms/u-boot/arch/arm/cpu/armv7/iproc-common/timer.c
new file mode 100644
index 000000000..a4255a44c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/iproc-common/timer.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <init.h>
+#include <time.h>
+#include <asm/io.h>
+#include <asm/iproc-common/timer.h>
+#include <asm/iproc-common/sysmap.h>
+#include <linux/delay.h>
+
+static inline uint64_t timer_global_read(void)
+{
+	uint64_t cur_tick;
+	uint32_t count_h;
+	uint32_t count_l;
+
+	do {
+		count_h = readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
+				TIMER_GLB_HI_OFFSET);
+		count_l = readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
+				TIMER_GLB_LOW_OFFSET);
+		cur_tick = readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
+				 TIMER_GLB_HI_OFFSET);
+	} while (cur_tick != count_h);
+
+	return (cur_tick << 32) + count_l;
+}
+
+void timer_global_init(void)
+{
+	writel(0, IPROC_PERIPH_GLB_TIM_REG_BASE + TIMER_GLB_CTRL_OFFSET);
+	writel(0, IPROC_PERIPH_GLB_TIM_REG_BASE + TIMER_GLB_LOW_OFFSET);
+	writel(0, IPROC_PERIPH_GLB_TIM_REG_BASE + TIMER_GLB_HI_OFFSET);
+	writel(TIMER_GLB_TIM_CTRL_TIM_EN,
+	       IPROC_PERIPH_GLB_TIM_REG_BASE + TIMER_GLB_CTRL_OFFSET);
+}
+
+int timer_init(void)
+{
+	timer_global_init();
+	return 0;
+}
+
+unsigned long get_timer(unsigned long base)
+{
+	uint64_t count;
+	uint64_t ret;
+	uint64_t tim_clk;
+	uint64_t periph_clk;
+
+	count = timer_global_read();
+
+	/* default arm clk is 1GHz, periph_clk=arm_clk/2, tick per msec */
+	periph_clk = 500000;
+	tim_clk = lldiv(periph_clk,
+			(((readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
+				 TIMER_GLB_CTRL_OFFSET) &
+			TIMER_GLB_TIM_CTRL_PRESC_MASK) >> 8) + 1));
+
+	ret = lldiv(count, (uint32_t)tim_clk);
+
+	/* returns msec */
+	return ret - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	uint64_t cur_tick, end_tick;
+	uint64_t tim_clk;
+	uint64_t periph_clk;
+
+	/* default arm clk is 1GHz, periph_clk=arm_clk/2, tick per usec */
+	periph_clk = 500;
+
+	tim_clk = lldiv(periph_clk,
+			(((readl(IPROC_PERIPH_GLB_TIM_REG_BASE +
+				 TIMER_GLB_CTRL_OFFSET) &
+			TIMER_GLB_TIM_CTRL_PRESC_MASK) >> 8) + 1));
+
+	cur_tick = timer_global_read();
+
+	end_tick = tim_clk;
+	end_tick *= usec;
+	end_tick += cur_tick;
+
+	do {
+		cur_tick = timer_global_read();
+
+	} while (cur_tick < end_tick);
+}
+
+void timer_systick_init(uint32_t tick_ms)
+{
+	/* Disable timer and clear interrupt status*/
+	writel(0, IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_CTRL_OFFSET);
+	writel(TIMER_PVT_TIM_INT_STATUS_SET,
+	       IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_STATUS_OFFSET);
+	writel((PLL_AXI_CLK/1000) * tick_ms,
+	       IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_LOAD_OFFSET);
+	writel(TIMER_PVT_TIM_CTRL_INT_EN |
+	       TIMER_PVT_TIM_CTRL_AUTO_RELD |
+	       TIMER_PVT_TIM_CTRL_TIM_EN,
+	       IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_CTRL_OFFSET);
+}
+
+void timer_systick_isr(void *data)
+{
+	writel(TIMER_PVT_TIM_INT_STATUS_SET,
+	       IPROC_PERIPH_PVT_TIM_REG_BASE + TIMER_PVT_STATUS_OFFSET);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value in msec.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This is used in conjuction with get_ticks, which returns msec as ticks.
+ * Here we just return ticks/sec = msec/sec = 1000
+ */
+ulong get_tbclk(void)
+{
+	return 1000;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/kona-common/Makefile b/roms/u-boot/arch/arm/cpu/armv7/kona-common/Makefile
new file mode 100644
index 000000000..56de3d18e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/kona-common/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2013 Broadcom Corporation.
+
+obj-y	+= s_init.o
+obj-y	+= hwinit-common.o
+obj-y	+= clk-stubs.o
+obj-${CONFIG_KONA_RESET_S} += reset.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c b/roms/u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c
new file mode 100644
index 000000000..4eddaca88
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <common.h>
+
+/*
+ * These weak functions are available to kona architectures that don't
+ * require clock enables from the driver code.
+ */
+int __weak clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	return 0;
+}
+
+int __weak clk_bsc_enable(void *base)
+{
+	return 0;
+}
+
+int __weak clk_usb_otg_enable(void *base)
+{
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/kona-common/hwinit-common.c b/roms/u-boot/arch/arm/cpu/armv7/kona-common/hwinit-common.c
new file mode 100644
index 000000000..cfc7c9fbc
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/kona-common/hwinit-common.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/cache.h>
+#include <linux/sizes.h>
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/kona-common/reset.S b/roms/u-boot/arch/arm/cpu/armv7/kona-common/reset.S
new file mode 100644
index 000000000..eea835b34
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/kona-common/reset.S
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+.globl reset_cpu
+reset_cpu:
+	ldr	r1, =0x35001f00
+	ldr	r2, [r1]
+	ldr	r4, =0x80000000
+	and	r4, r2, r4
+	ldr	r3, =0xA5A500
+	orr	r4, r4, r3
+	orr	r4, r4, #0x1
+
+	str	r4, [r1]
+
+	ldr	r1, =0x35001f04
+	ldr	r2, [r1]
+	ldr	r4, =0x80000000
+	and	r4, r2, r4
+	str	r4, [r1]
+
+_loop_forever:
+	b	_loop_forever
diff --git a/roms/u-boot/arch/arm/cpu/armv7/kona-common/s_init.c b/roms/u-boot/arch/arm/cpu/armv7/kona-common/s_init.c
new file mode 100644
index 000000000..778b9176f
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/kona-common/s_init.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+/*
+ * Early system init. Currently empty.
+ */
+void s_init(void)
+{
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/lowlevel_init.S b/roms/u-boot/arch/arm/cpu/armv7/lowlevel_init.S
new file mode 100644
index 000000000..ba4b374a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/lowlevel_init.S
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * A lowlevel_init function that sets up the stack to call a C function to
+ * perform further init.
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+.pushsection .text.s_init, "ax"
+WEAK(s_init)
+	bx	lr
+ENDPROC(s_init)
+.popsection
+
+.pushsection .text.lowlevel_init, "ax"
+WEAK(lowlevel_init)
+	/*
+	 * Setup a temporary stack. Global data is not available yet.
+	 */
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+	ldr	sp, =CONFIG_SPL_STACK
+#else
+	ldr	sp, =CONFIG_SYS_INIT_SP_ADDR
+#endif
+	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
+#ifdef CONFIG_SPL_DM
+	mov	r9, #0
+#else
+	/*
+	 * Set up global data for boards that still need it. This will be
+	 * removed soon.
+	 */
+#ifdef CONFIG_SPL_BUILD
+	ldr	r9, =gdata
+#else
+	sub	sp, sp, #GD_SIZE
+	bic	sp, sp, #7
+	mov	r9, sp
+#endif
+#endif
+	/*
+	 * Save the old lr(passed in ip) and the current lr to stack
+	 */
+	push	{ip, lr}
+
+	/*
+	 * Call the very early init function. This should do only the
+	 * absolute bare minimum to get started. It should not:
+	 *
+	 * - set up DRAM
+	 * - use global_data
+	 * - clear BSS
+	 * - try to start a console
+	 *
+	 * For boards with SPL this should be empty since SPL can do all of
+	 * this init in the SPL board_init_f() function which is called
+	 * immediately after this.
+	 */
+	bl	s_init
+	pop	{ip, pc}
+ENDPROC(lowlevel_init)
+.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/Kconfig b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/Kconfig
new file mode 100644
index 000000000..747059b56
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -0,0 +1,104 @@
+config ARCH_LS1021A
+	bool
+	select SYS_FSL_DDR_BE if SYS_FSL_DDR
+	select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
+	select SYS_FSL_ERRATUM_A008378
+	select SYS_FSL_ERRATUM_A008407
+	select SYS_FSL_ERRATUM_A008850
+	select SYS_FSL_ERRATUM_A008997 if USB
+	select SYS_FSL_ERRATUM_A009007 if USB
+	select SYS_FSL_ERRATUM_A009008 if USB
+	select SYS_FSL_ERRATUM_A009663
+	select SYS_FSL_ERRATUM_A009798 if USB
+	select SYS_FSL_ERRATUM_A009942
+	select SYS_FSL_ERRATUM_A010315
+	select SYS_FSL_HAS_CCI400
+	select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR
+	select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
+	imply CMD_PCI
+	imply SCSI
+	imply SCSI_AHCI
+
+menu "LS102xA architecture"
+	depends on ARCH_LS1021A
+
+config LS1_DEEP_SLEEP
+	bool "Deep sleep"
+
+config MAX_CPUS
+	int "Maximum number of CPUs permitted for LS102xA"
+	default 2
+	help
+	  Set this number to the maximum number of possible CPUs in the SoC.
+	  SoCs may have multiple clusters with each cluster may have multiple
+	  ports. If some ports are reserved but higher ports are used for
+	  cores, count the reserved ports. This will allocate enough memory
+	  in spin table to properly handle all cores.
+
+config NXP_ESBC
+	bool	"NXP_ESBC"
+	help
+		Enable Freescale Secure Boot feature. Normally selected
+		by defconfig. If unsure, do not change.
+
+config SYS_CCI400_OFFSET
+	hex "Offset for CCI400 base"
+	depends on SYS_FSL_HAS_CCI400
+	default 0x180000
+	help
+	  Offset for CCI400 base.
+	  CCI400 base addr = CCSRBAR + CCI400_OFFSET
+
+config SYS_FSL_ERRATUM_A008850
+	bool
+	help
+	  Workaround for DDR erratum A008850
+
+config SYS_FSL_ERRATUM_A008997
+	bool
+	help
+	  Workaround for USB PHY erratum A008997
+
+config SYS_FSL_ERRATUM_A009007
+	bool
+	help
+	  Workaround for USB PHY erratum A009007
+
+config SYS_FSL_ERRATUM_A009008
+	bool
+	help
+	  Workaround for USB PHY erratum A009008
+
+config SYS_FSL_ERRATUM_A009798
+	bool
+	help
+	  Workaround for USB PHY erratum A009798
+
+config SYS_FSL_ERRATUM_A010315
+	bool "Workaround for PCIe erratum A010315"
+
+config SYS_FSL_HAS_CCI400
+	bool
+
+config SYS_FSL_SRDS_1
+	bool
+
+config SYS_FSL_SRDS_2
+	bool
+
+config SYS_HAS_SERDES
+	bool
+
+config SYS_FSL_IFC_BANK_COUNT
+	int "Maximum banks of Integrated flash controller"
+	default 8
+
+config SYS_FSL_ERRATUM_A008407
+	bool
+
+endmenu
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/Makefile b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/Makefile
new file mode 100644
index 000000000..0c1596f33
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -0,0 +1,19 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y	+= cpu.o
+obj-y	+= clock.o
+obj-y	+= timer.o
+obj-y	+= fsl_epu.o
+obj-y	+= soc.o
+
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
+obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
+obj-$(CONFIG_SPL) += spl.o
+
+ifdef CONFIG_ARMV7_PSCI
+obj-y  += psci.o ls102xa_psci.o
+endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/clock.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/clock.c
new file mode 100644
index 000000000..940995ef5
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/clock.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+#include <fsl_ifc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
+#define CONFIG_SYS_FSL_NUM_CC_PLLS      2
+#endif
+
+void get_sys_info(struct sys_info *sys_info)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR);
+	unsigned int cpu;
+	const u8 core_cplx_pll[6] = {
+		[0] = 0,	/* CC1 PPL / 1 */
+		[1] = 0,	/* CC1 PPL / 2 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 1,	/* CC2 PPL / 2 */
+	};
+
+	const u8 core_cplx_pll_div[6] = {
+		[0] = 1,	/* CC1 PPL / 1 */
+		[1] = 2,	/* CC1 PPL / 2 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 2,	/* CC2 PPL / 2 */
+	};
+
+	uint i;
+	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+
+	sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#else
+	sys_info->freq_ddrbus = sysclk;
+#endif
+
+	sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >>
+		RCWSR0_SYS_PLL_RAT_SHIFT) & RCWSR0_SYS_PLL_RAT_MASK;
+	sys_info->freq_ddrbus *= (in_be32(&gur->rcwsr[0]) >>
+		RCWSR0_MEM_PLL_RAT_SHIFT) & RCWSR0_MEM_PLL_RAT_MASK;
+
+	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
+		ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f;
+		if (ratio[i] > 4)
+			freq_c_pll[i] = sysclk * ratio[i];
+		else
+			freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
+	}
+
+	for (cpu = 0; cpu < CONFIG_MAX_CPUS; cpu++) {
+		u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
+				& 0xf;
+		u32 cplx_pll = core_cplx_pll[c_pll_sel];
+
+		sys_info->freq_processor[cpu] =
+			freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+	}
+
+#if defined(CONFIG_FSL_IFC)
+	sys_info->freq_localbus = sys_info->freq_systembus;
+#endif
+}
+
+int get_clocks(void)
+{
+	struct sys_info sys_info;
+
+	get_sys_info(&sys_info);
+	gd->cpu_clk = sys_info.freq_processor[0];
+	gd->bus_clk = sys_info.freq_systembus;
+	gd->mem_clk = sys_info.freq_ddrbus * 2;
+
+#if defined(CONFIG_FSL_ESDHC)
+	gd->arch.sdhc_clk = gd->bus_clk;
+#endif
+
+	return 0;
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+	return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+	return gd->mem_clk;
+}
+
+int get_serial_clock(void)
+{
+	return gd->bus_clk / 2;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_I2C_CLK:
+		return get_bus_freq(0) / 2;
+	case MXC_DSPI_CLK:
+		return get_bus_freq(0) / 2;
+	case MXC_UART_CLK:
+		return get_bus_freq(0) / 2;
+	default:
+		printf("Unsupported clock\n");
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c
new file mode 100644
index 000000000..d863c9625
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <net.h>
+#include <vsprintf.h>
+#include <asm/arch/clock.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/cache.h>
+#include <asm/system.h>
+#include <tsec.h>
+#include <netdev.h>
+#include <fsl_esdhc.h>
+#include <config.h>
+#include <fsl_wdog.h>
+#include <linux/delay.h>
+
+#include "fsl_epu.h"
+
+#define DCSR_RCPM2_BLOCK_OFFSET	0x223000
+#define DCSR_RCPM2_CPMFSMCR0	0x400
+#define DCSR_RCPM2_CPMFSMSR0	0x404
+#define DCSR_RCPM2_CPMFSMCR1	0x414
+#define DCSR_RCPM2_CPMFSMSR1	0x418
+#define CPMFSMSR_FSM_STATE_MASK	0x7f
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+
+/*
+ * Bit[1] of the descriptor indicates the descriptor type,
+ * and bit[0] indicates whether the descriptor is valid.
+ */
+#define PMD_TYPE_TABLE		0x3
+#define PMD_TYPE_SECT		0x1
+
+/* AttrIndx[2:0] */
+#define PMD_ATTRINDX(t)		((t) << 2)
+
+/* Section */
+#define PMD_SECT_AF		(1 << 10)
+
+#define BLOCK_SIZE_L1		(1UL << 30)
+#define BLOCK_SIZE_L2		(1UL << 21)
+
+/* TTBCR flags */
+#define TTBCR_EAE		(1 << 31)
+#define TTBCR_T0SZ(x)		((x) << 0)
+#define TTBCR_T1SZ(x)		((x) << 16)
+#define TTBCR_USING_TTBR0	(TTBCR_T0SZ(0) | TTBCR_T1SZ(0))
+#define TTBCR_IRGN0_NC		(0 << 8)
+#define TTBCR_IRGN0_WBWA	(1 << 8)
+#define TTBCR_IRGN0_WT		(2 << 8)
+#define TTBCR_IRGN0_WBNWA	(3 << 8)
+#define TTBCR_IRGN0_MASK	(3 << 8)
+#define TTBCR_ORGN0_NC		(0 << 10)
+#define TTBCR_ORGN0_WBWA	(1 << 10)
+#define TTBCR_ORGN0_WT		(2 << 10)
+#define TTBCR_ORGN0_WBNWA	(3 << 10)
+#define TTBCR_ORGN0_MASK	(3 << 10)
+#define TTBCR_SHARED_NON	(0 << 12)
+#define TTBCR_SHARED_OUTER	(2 << 12)
+#define TTBCR_SHARED_INNER	(3 << 12)
+#define TTBCR_EPD0		(0 << 7)
+#define TTBCR			(TTBCR_SHARED_NON | \
+				 TTBCR_ORGN0_NC	| \
+				 TTBCR_IRGN0_NC	| \
+				 TTBCR_USING_TTBR0 | \
+				 TTBCR_EAE)
+
+/*
+ * Memory region attributes for LPAE (defined in pgtable):
+ *
+ * n = AttrIndx[2:0]
+ *
+ *		              n       MAIR
+ *	UNCACHED              000     00000000
+ *	BUFFERABLE            001     01000100
+ *	DEV_WC                001     01000100
+ *	WRITETHROUGH          010     10101010
+ *	WRITEBACK             011     11101110
+ *	DEV_CACHED            011     11101110
+ *	DEV_SHARED            100     00000100
+ *	DEV_NONSHARED         100     00000100
+ *	unused                101
+ *	unused                110
+ *	WRITEALLOC            111     11111111
+ */
+#define MT_MAIR0		0xeeaa4400
+#define MT_MAIR1		0xff000004
+#define MT_STRONLY_ORDER	0
+#define MT_NORMAL_NC		1
+#define MT_DEVICE_MEM		4
+#define MT_NORMAL		7
+
+/* The phy_addr must be aligned to 4KB */
+static inline void set_pgtable(u32 *page_table, u32 index, u32 phy_addr)
+{
+	u32 value = phy_addr | PMD_TYPE_TABLE;
+
+	page_table[2 * index] = value;
+	page_table[2 * index + 1] = 0;
+}
+
+/* The phy_addr must be aligned to 4KB */
+static inline void set_pgsection(u32 *page_table, u32 index, u64 phy_addr,
+				 u32 memory_type)
+{
+	u64 value;
+
+	value = phy_addr | PMD_TYPE_SECT | PMD_SECT_AF;
+	value |= PMD_ATTRINDX(memory_type);
+	page_table[2 * index] = value & 0xFFFFFFFF;
+	page_table[2 * index + 1] = (value >> 32) & 0xFFFFFFFF;
+}
+
+/*
+ * Start MMU after DDR is available, we create MMU table in DRAM.
+ * The base address of TTLB is gd->arch.tlb_addr. We use two
+ * levels of translation tables here to cover 40-bit address space.
+ *
+ * The TTLBs are located at PHY 2G~4G.
+ *
+ * VA mapping:
+ *
+ *  -------  <---- 0GB
+ * |       |
+ * |       |
+ * |-------| <---- 0x24000000
+ * |///////|  ===> 192MB VA map for PCIe1 with offset 0x40_0000_0000
+ * |-------| <---- 0x300000000
+ * |       |
+ * |-------| <---- 0x34000000
+ * |///////|  ===> 192MB VA map for PCIe2 with offset 0x48_0000_0000
+ * |-------| <---- 0x40000000
+ * |       |
+ * |-------| <---- 0x80000000 DDR0 space start
+ * |\\\\\\\|
+ *.|\\\\\\\|  ===> 2GB VA map for 2GB DDR0 Memory space
+ * |\\\\\\\|
+ *  -------  <---- 4GB DDR0 space end
+ */
+static void mmu_setup(void)
+{
+	u32 *level0_table = (u32 *)gd->arch.tlb_addr;
+	u32 *level1_table = (u32 *)(gd->arch.tlb_addr + 0x1000);
+	u64 va_start = 0;
+	u32 reg;
+	int i;
+
+	/* Level 0 Table 2-3 are used to map DDR */
+	set_pgsection(level0_table, 3, 3 * BLOCK_SIZE_L1, MT_NORMAL);
+	set_pgsection(level0_table, 2, 2 * BLOCK_SIZE_L1, MT_NORMAL);
+	/* Level 0 Table 1 is used to map device */
+	set_pgsection(level0_table, 1, 1 * BLOCK_SIZE_L1, MT_DEVICE_MEM);
+	/* Level 0 Table 0 is used to map device including PCIe MEM */
+	set_pgtable(level0_table, 0, (u32)level1_table);
+
+	/* Level 1 has 512 entries */
+	for (i = 0; i < 512; i++) {
+		/* Mapping for PCIe 1 */
+		if (va_start >= CONFIG_SYS_PCIE1_VIRT_ADDR &&
+		    va_start < (CONFIG_SYS_PCIE1_VIRT_ADDR +
+				 CONFIG_SYS_PCIE_MMAP_SIZE))
+			set_pgsection(level1_table, i,
+				      CONFIG_SYS_PCIE1_PHYS_BASE + va_start,
+				      MT_DEVICE_MEM);
+		/* Mapping for PCIe 2 */
+		else if (va_start >= CONFIG_SYS_PCIE2_VIRT_ADDR &&
+			 va_start < (CONFIG_SYS_PCIE2_VIRT_ADDR +
+				     CONFIG_SYS_PCIE_MMAP_SIZE))
+			set_pgsection(level1_table, i,
+				      CONFIG_SYS_PCIE2_PHYS_BASE + va_start,
+				      MT_DEVICE_MEM);
+		else
+			set_pgsection(level1_table, i,
+				      va_start,
+				      MT_DEVICE_MEM);
+		va_start += BLOCK_SIZE_L2;
+	}
+
+	asm volatile("dsb sy;isb");
+	asm volatile("mcr p15, 0, %0, c2, c0, 2" /* Write RT to TTBCR */
+			: : "r" (TTBCR) : "memory");
+	asm volatile("mcrr p15, 0, %0, %1, c2" /* TTBR 0 */
+			: : "r" ((u32)level0_table), "r" (0) : "memory");
+	asm volatile("mcr p15, 0, %0, c10, c2, 0" /* write MAIR 0 */
+			: : "r" (MT_MAIR0) : "memory");
+	asm volatile("mcr p15, 0, %0, c10, c2, 1" /* write MAIR 1 */
+			: : "r" (MT_MAIR1) : "memory");
+
+	/* Set the access control to all-supervisor */
+	asm volatile("mcr p15, 0, %0, c3, c0, 0"
+		     : : "r" (~0));
+
+	/* Enable the mmu */
+	reg = get_cr();
+	set_cr(reg | CR_M);
+}
+
+/*
+ * This function is called from lib/board.c. It recreates MMU
+ * table in main memory. MMU and i/d-cache are enabled here.
+ */
+void enable_caches(void)
+{
+	/* Invalidate all TLB */
+	mmu_page_table_flush(gd->arch.tlb_addr,
+			     gd->arch.tlb_addr +  gd->arch.tlb_size);
+	/* Set up and enable mmu */
+	mmu_setup();
+
+	/* Invalidate & Enable d-cache */
+	invalidate_dcache_all();
+	set_cr(get_cr() | CR_C);
+}
+#endif /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+
+
+uint get_svr(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	return in_be32(&gur->svr);
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char buf1[32], buf2[32];
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int svr, major, minor, ver, i;
+
+	svr = in_be32(&gur->svr);
+	major = SVR_MAJ(svr);
+	minor = SVR_MIN(svr);
+
+	puts("CPU:   Freescale LayerScape ");
+
+	ver = SVR_SOC_VER(svr);
+	switch (ver) {
+	case SOC_VER_SLS1020:
+		puts("SLS1020");
+		break;
+	case SOC_VER_LS1020:
+		puts("LS1020");
+		break;
+	case SOC_VER_LS1021:
+		puts("LS1021");
+		break;
+	case SOC_VER_LS1022:
+		puts("LS1022");
+		break;
+	default:
+		puts("Unknown");
+		break;
+	}
+
+	if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020))
+		puts("E");
+
+	printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+
+	puts("Clock Configuration:");
+
+	printf("\n       CPU0(ARMV7):%-4s MHz, ", strmhz(buf1, gd->cpu_clk));
+	printf("\n       Bus:%-4s MHz, ", strmhz(buf1, gd->bus_clk));
+	printf("DDR:%-4s MHz (%s MT/s data rate), ",
+	       strmhz(buf1, gd->mem_clk/2), strmhz(buf2, gd->mem_clk));
+	puts("\n");
+
+	/* Display the RCW, so that no one gets confused as to what RCW
+	 * we're actually using for this boot.
+	 */
+	puts("Reset Configuration Word (RCW):");
+	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+		u32 rcw = in_be32(&gur->rcwsr[i]);
+
+		if ((i % 4) == 0)
+			printf("\n       %08x:", i * 4);
+		printf(" %08x", rcw);
+	}
+	puts("\n");
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+int cpu_mmc_init(struct bd_info *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int cpu_eth_init(struct bd_info *bis)
+{
+#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH)
+	tsec_standard_init(bis);
+#endif
+
+	return 0;
+}
+
+int arch_cpu_init(void)
+{
+	void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+	void *rcpm2_base =
+		(void *)(CONFIG_SYS_DCSRBAR + DCSR_RCPM2_BLOCK_OFFSET);
+	struct ccsr_scfg *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	u32 state;
+
+	icache_enable();
+
+	/*
+	 * The RCPM FSM state may not be reset after power-on.
+	 * So, reset them.
+	 */
+	state = in_be32(rcpm2_base + DCSR_RCPM2_CPMFSMSR0) &
+		CPMFSMSR_FSM_STATE_MASK;
+	if (state != 0) {
+		out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR0, 0x80);
+		out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR0, 0x0);
+	}
+
+	state = in_be32(rcpm2_base + DCSR_RCPM2_CPMFSMSR1) &
+		CPMFSMSR_FSM_STATE_MASK;
+	if (state != 0) {
+		out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR1, 0x80);
+		out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR1, 0x0);
+	}
+
+	/*
+	 * After wakeup from deep sleep, Clear EPU registers
+	 * as early as possible to prevent from possible issue.
+	 * It's also safe to clear at normal boot.
+	 */
+	fsl_epu_clean(epu_base);
+
+	setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR);
+
+	return 0;
+}
+
+#ifdef CONFIG_ARMV7_NONSEC
+/* Set the address at which the secondary core starts from.*/
+void smp_set_core_boot_addr(unsigned long addr, int corenr)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	out_be32(&gur->scratchrw[0], addr);
+}
+
+/* Release the secondary core from holdoff state and kick it */
+void smp_kick_all_cpus(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	out_be32(&gur->brrl, 0x2);
+
+	/*
+	 * LS1 STANDBYWFE is not captured outside the ARM module in the soc.
+	 * So add a delay to wait bootrom execute WFE.
+	 */
+	udelay(1);
+
+	asm volatile("sev");
+}
+#endif
+
+void reset_cpu(void)
+{
+	struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+
+	clrbits_be16(&wdog->wcr, WCR_SRS);
+
+	while (1) {
+		/*
+		 * Let the watchdog trigger
+		 */
+	}
+}
+
+void arch_preboot_os(void)
+{
+	unsigned long ctrl;
+
+	/* Disable PL1 Physical Timer */
+	asm("mrc p15, 0, %0, c14, c2, 1" : "=r" (ctrl));
+	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+	asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c
new file mode 100644
index 000000000..0daf8234f
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <net.h>
+#include <asm/global_data.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/clock.h>
+#include <linux/ctype.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+#include <tsec.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <fsl_sec.h>
+#include <dm.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_fixup_enet_phy_connect_type(void *fdt)
+{
+#ifdef CONFIG_DM_ETH
+	struct udevice *dev;
+#else
+	struct eth_device *dev;
+#endif
+	struct tsec_private *priv;
+	const char *enet_path, *phy_path;
+	char enet[16];
+	char phy[16];
+	int phy_node;
+	int i = 0;
+	uint32_t ph;
+#ifdef CONFIG_DM_ETH
+	char *name[3] = { "ethernet@2d10000", "ethernet@2d50000",
+			  "ethernet@2d90000" };
+#else
+	char *name[3] = { "eTSEC1", "eTSEC2", "eTSEC3" };
+#endif
+
+	for (; i < ARRAY_SIZE(name); i++) {
+		dev = eth_get_dev_by_name(name[i]);
+		if (dev) {
+			sprintf(enet, "ethernet%d", i);
+			sprintf(phy, "enet%d_rgmii_phy", i);
+		} else {
+			continue;
+		}
+
+#ifdef CONFIG_DM_ETH
+		priv = dev_get_priv(dev);
+#else
+		priv = dev->priv;
+#endif
+		if (priv->flags & TSEC_SGMII)
+			continue;
+
+		enet_path = fdt_get_alias(fdt, enet);
+		if (!enet_path)
+			continue;
+
+		phy_path = fdt_get_alias(fdt, phy);
+		if (!phy_path)
+			continue;
+
+		phy_node = fdt_path_offset(fdt, phy_path);
+		if (phy_node < 0)
+			continue;
+
+		ph = fdt_create_phandle(fdt, phy_node);
+		if (ph)
+			do_fixup_by_path_u32(fdt, enet_path,
+					     "phy-handle", ph, 1);
+
+		do_fixup_by_path(fdt, enet_path, "phy-connection-type",
+				 phy_string_for_interface(
+				 PHY_INTERFACE_MODE_RGMII_ID),
+				 strlen(phy_string_for_interface(
+				 PHY_INTERFACE_MODE_RGMII_ID)) + 1,
+				 1);
+	}
+}
+
+void ft_cpu_setup(void *blob, struct bd_info *bd)
+{
+	int off;
+	int val;
+	const char *sysclk_path;
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int svr;
+	svr = in_be32(&gur->svr);
+
+	unsigned long busclk = get_bus_freq(0);
+
+	/* delete crypto node if not on an E-processor */
+	if (!IS_E_PROCESSOR(svr))
+		fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+	else {
+		ccsr_sec_t __iomem *sec;
+
+		sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+		fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
+	}
+#endif
+
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		val = gd->cpu_clk;
+		fdt_setprop(blob, off, "clock-frequency", &val, 4);
+		off = fdt_node_offset_by_prop_value(blob, off,
+						    "device_type", "cpu", 4);
+	}
+
+	do_fixup_by_prop_u32(blob, "device_type", "soc",
+			     4, "bus-frequency", busclk, 1);
+
+	ft_fixup_enet_phy_connect_type(blob);
+
+#ifdef CONFIG_SYS_NS16550
+	do_fixup_by_compat_u32(blob, "fsl,16550-FIFO64",
+			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+	sysclk_path = fdt_get_alias(blob, "sysclk");
+	if (sysclk_path)
+		do_fixup_by_path_u32(blob, sysclk_path, "clock-frequency",
+				     CONFIG_SYS_CLK_FREQ, 1);
+	do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0",
+			       "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+
+#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
+#define UBOOT_HEAD_LEN	0x1000
+	/*
+	 * Reserved memory in SD boot deep sleep case.
+	 * Second stage uboot binary and malloc space should be reserved.
+	 * If the memory they occupied has not been reserved, then this
+	 * space would be used by kernel and overwritten in uboot when
+	 * deep sleep resume, which cause deep sleep failed.
+	 * Since second uboot binary has a head, that space need to be
+	 * reserved either(assuming its size is less than 0x1000).
+	 */
+	off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN,
+			CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
+			UBOOT_HEAD_LEN);
+	if (off < 0)
+		printf("Failed to reserve memory for SD boot deep sleep: %s\n",
+		       fdt_strerror(off));
+#endif
+
+#if defined(CONFIG_FSL_ESDHC)
+	fdt_fixup_esdhc(blob, bd);
+#endif
+
+	/*
+	 * platform bus clock = system bus clock/2
+	 * Here busclk = system bus clock
+	 * We are using the platform bus clock as 1588 Timer reference
+	 * clock source select
+	 */
+	do_fixup_by_compat_u32(blob, "fsl, gianfar-ptp-timer",
+			       "timer-frequency", busclk / 2, 1);
+
+	/*
+	 * clock-freq should change to clock-frequency and
+	 * flexcan-v1.0 should change to p1010-flexcan respectively
+	 * in the future.
+	 */
+	do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0",
+			       "clock_freq", busclk / 2, 1);
+
+	do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0",
+			       "clock-frequency", busclk / 2, 1);
+
+	do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan",
+			       "clock-frequency", busclk / 2, 1);
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+	off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT,
+					    CONFIG_SYS_IFC_ADDR);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+#else
+	off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT,
+					    QSPI0_BASE_ADDR);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+	off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT,
+					    DSPI1_BASE_ADDR);
+	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
new file mode 100644
index 000000000..e31a4fb6c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include "fsl_epu.h"
+
+struct fsm_reg_vals epu_default_val[] = {
+	/* EPGCR (Event Processor Global Control Register) */
+	{EPGCR, 0},
+	/* EPECR (Event Processor Event Control Registers) */
+	{EPECR0 + EPECR_STRIDE * 0, 0},
+	{EPECR0 + EPECR_STRIDE * 1, 0},
+	{EPECR0 + EPECR_STRIDE * 2, 0xF0004004},
+	{EPECR0 + EPECR_STRIDE * 3, 0x80000084},
+	{EPECR0 + EPECR_STRIDE * 4, 0x20000084},
+	{EPECR0 + EPECR_STRIDE * 5, 0x08000004},
+	{EPECR0 + EPECR_STRIDE * 6, 0x80000084},
+	{EPECR0 + EPECR_STRIDE * 7, 0x80000084},
+	{EPECR0 + EPECR_STRIDE * 8, 0x60000084},
+	{EPECR0 + EPECR_STRIDE * 9, 0x08000084},
+	{EPECR0 + EPECR_STRIDE * 10, 0x42000084},
+	{EPECR0 + EPECR_STRIDE * 11, 0x90000084},
+	{EPECR0 + EPECR_STRIDE * 12, 0x80000084},
+	{EPECR0 + EPECR_STRIDE * 13, 0x08000084},
+	{EPECR0 + EPECR_STRIDE * 14, 0x02000084},
+	{EPECR0 + EPECR_STRIDE * 15, 0x00000004},
+	/*
+	 * EPEVTCR (Event Processor EVT Pin Control Registers)
+	 * SCU8 triger EVT2, and SCU11 triger EVT9
+	 */
+	{EPEVTCR0 + EPEVTCR_STRIDE * 0, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 1, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 2, 0x80000001},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 3, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 4, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 5, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 6, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 7, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 8, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 9, 0xB0000001},
+	/* EPCMPR (Event Processor Counter Compare Registers) */
+	{EPCMPR0 + EPCMPR_STRIDE * 0, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 1, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 2, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 3, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 4, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 5, 0x00000020},
+	{EPCMPR0 + EPCMPR_STRIDE * 6, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 7, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 8, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 9, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 10, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 11, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 12, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 13, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 14, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 15, 0x000000FF},
+	/* EPCCR (Event Processor Counter Control Registers) */
+	{EPCCR0 + EPCCR_STRIDE * 0, 0},
+	{EPCCR0 + EPCCR_STRIDE * 1, 0},
+	{EPCCR0 + EPCCR_STRIDE * 2, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 3, 0},
+	{EPCCR0 + EPCCR_STRIDE * 4, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 5, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 6, 0},
+	{EPCCR0 + EPCCR_STRIDE * 7, 0},
+	{EPCCR0 + EPCCR_STRIDE * 8, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 9, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 10, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 11, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 12, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 13, 0},
+	{EPCCR0 + EPCCR_STRIDE * 14, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 15, 0x92840000},
+	/* EPSMCR (Event Processor SCU Mux Control Registers) */
+	{EPSMCR0 + EPSMCR_STRIDE * 0, 0},
+	{EPSMCR0 + EPSMCR_STRIDE * 1, 0},
+	{EPSMCR0 + EPSMCR_STRIDE * 2, 0x6C700000},
+	{EPSMCR0 + EPSMCR_STRIDE * 3, 0x2F000000},
+	{EPSMCR0 + EPSMCR_STRIDE * 4, 0x002F0000},
+	{EPSMCR0 + EPSMCR_STRIDE * 5, 0x00002E00},
+	{EPSMCR0 + EPSMCR_STRIDE * 6, 0x7C000000},
+	{EPSMCR0 + EPSMCR_STRIDE * 7, 0x30000000},
+	{EPSMCR0 + EPSMCR_STRIDE * 8, 0x64300000},
+	{EPSMCR0 + EPSMCR_STRIDE * 9, 0x00003000},
+	{EPSMCR0 + EPSMCR_STRIDE * 10, 0x65000030},
+	{EPSMCR0 + EPSMCR_STRIDE * 11, 0x31740000},
+	{EPSMCR0 + EPSMCR_STRIDE * 12, 0x7F000000},
+	{EPSMCR0 + EPSMCR_STRIDE * 13, 0x00003100},
+	{EPSMCR0 + EPSMCR_STRIDE * 14, 0x00000031},
+	{EPSMCR0 + EPSMCR_STRIDE * 15, 0x76000000},
+	/* EPACR (Event Processor Action Control Registers) */
+	{EPACR0 + EPACR_STRIDE * 0, 0},
+	{EPACR0 + EPACR_STRIDE * 1, 0},
+	{EPACR0 + EPACR_STRIDE * 2, 0},
+	{EPACR0 + EPACR_STRIDE * 3, 0x00000080},
+	{EPACR0 + EPACR_STRIDE * 4, 0},
+	{EPACR0 + EPACR_STRIDE * 5, 0x00000040},
+	{EPACR0 + EPACR_STRIDE * 6, 0},
+	{EPACR0 + EPACR_STRIDE * 7, 0},
+	{EPACR0 + EPACR_STRIDE * 8, 0},
+	{EPACR0 + EPACR_STRIDE * 9, 0x0000001C},
+	{EPACR0 + EPACR_STRIDE * 10, 0x00000020},
+	{EPACR0 + EPACR_STRIDE * 11, 0},
+	{EPACR0 + EPACR_STRIDE * 12, 0x00000003},
+	{EPACR0 + EPACR_STRIDE * 13, 0x06000000},
+	{EPACR0 + EPACR_STRIDE * 14, 0x04000000},
+	{EPACR0 + EPACR_STRIDE * 15, 0x02000000},
+	/* EPIMCR (Event Processor Input Mux Control Registers) */
+	{EPIMCR0 + EPIMCR_STRIDE * 0, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 1, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 2, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 3, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 4, 0x44000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 5, 0x40000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 6, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 7, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 8, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 9, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 10, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 11, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 12, 0x44000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 13, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 14, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 15, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 16, 0x6A000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 17, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 18, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 19, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 20, 0x48000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 21, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 22, 0x6C000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 23, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 24, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 25, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 26, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 27, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 28, 0x76000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 29, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 30, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 31, 0x76000000},
+	/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+	{EPXTRIGCR, 0x0000FFDF},
+	/* end */
+	{FSM_END_FLAG, 0},
+};
+
+/**
+ * fsl_epu_setup - Setup EPU registers to default values
+ */
+void fsl_epu_setup(void *epu_base)
+{
+	struct fsm_reg_vals *data = epu_default_val;
+
+	if (!epu_base || !data)
+		return;
+
+	while (data->offset != FSM_END_FLAG) {
+		out_be32(epu_base + data->offset, data->value);
+		data++;
+	}
+}
+
+/**
+ * fsl_epu_clean - Clear EPU registers
+ */
+void fsl_epu_clean(void *epu_base)
+{
+	u32 offset;
+
+	/* follow the exact sequence to clear the registers */
+	/* Clear EPACRn */
+	for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPEVTCRn */
+	for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPGCR */
+	out_be32(epu_base + EPGCR, 0);
+
+	/* Clear EPSMCRn */
+	for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPCCRn */
+	for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPCMPRn */
+	for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPCTRn */
+	for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPIMCRn */
+	for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPXTRIGCRn */
+	out_be32(epu_base + EPXTRIGCR, 0);
+
+	/* Clear EPECRn */
+	for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
+		out_be32(epu_base + offset, 0);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
new file mode 100644
index 000000000..711eea565
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_EPU_H
+#define __FSL_EPU_H
+
+#include <asm/types.h>
+
+#define FSL_STRIDE_4B	4
+#define FSL_STRIDE_8B	8
+
+/* Block offsets */
+#define EPU_BLOCK_OFFSET	0x00000000
+
+/* EPGCR (Event Processor Global Control Register) */
+#define EPGCR		0x000
+
+/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
+#define EPEVTCR0	0x050
+#define EPEVTCR9	0x074
+#define EPEVTCR_STRIDE	FSL_STRIDE_4B
+
+/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+#define EPXTRIGCR	0x090
+
+/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
+#define EPIMCR0		0x100
+#define EPIMCR31	0x17C
+#define EPIMCR_STRIDE	FSL_STRIDE_4B
+
+/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
+#define EPSMCR0		0x200
+#define EPSMCR15	0x278
+#define EPSMCR_STRIDE	FSL_STRIDE_8B
+
+/* EPECR0-15 (Event Processor Event Control Registers) */
+#define EPECR0		0x300
+#define EPECR15		0x33C
+#define EPECR_STRIDE	FSL_STRIDE_4B
+
+/* EPACR0-15 (Event Processor Action Control Registers) */
+#define EPACR0		0x400
+#define EPACR15		0x43C
+#define EPACR_STRIDE	FSL_STRIDE_4B
+
+/* EPCCRi0-15 (Event Processor Counter Control Registers) */
+#define EPCCR0		0x800
+#define EPCCR15		0x83C
+#define EPCCR31		0x87C
+#define EPCCR_STRIDE	FSL_STRIDE_4B
+
+/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
+#define EPCMPR0		0x900
+#define EPCMPR15	0x93C
+#define EPCMPR31	0x97C
+#define EPCMPR_STRIDE	FSL_STRIDE_4B
+
+/* EPCTR0-31 (Event Processor Counter Register) */
+#define EPCTR0		0xA00
+#define EPCTR31		0xA7C
+#define EPCTR_STRIDE	FSL_STRIDE_4B
+
+#define FSM_END_FLAG	0xFFFFFFFFUL
+
+struct fsm_reg_vals {
+	u32 offset;
+	u32 value;
+};
+
+void fsl_epu_setup(void *epu_base);
+void fsl_epu_clean(void *epu_base);
+
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
new file mode 100644
index 000000000..caf51e17b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include "fsl_ls1_serdes.h"
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+static u64 serdes1_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+static u64 serdes2_prtcl_map;
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	u64 ret = 0;
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	if (!(serdes1_prtcl_map & (1ULL << NONE)))
+		fsl_serdes_init();
+
+	ret |= (1ULL << device) & serdes1_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	if (!(serdes2_prtcl_map & (1ULL << NONE)))
+		fsl_serdes_init();
+
+	ret |= (1ULL << device) & serdes2_prtcl_map;
+#endif
+
+	return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg = in_be32(&gur->rcwsr[4]);
+	int i;
+
+	switch (sd) {
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	case FSL_SRDS_1:
+		cfg &= RCWSR4_SRDS1_PRTCL_MASK;
+		cfg >>= RCWSR4_SRDS1_PRTCL_SHIFT;
+		break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	case FSL_SRDS_2:
+		cfg &= RCWSR4_SRDS2_PRTCL_MASK;
+		cfg >>= RCWSR4_SRDS2_PRTCL_SHIFT;
+		break;
+#endif
+	default:
+		printf("invalid SerDes%d\n", sd);
+		break;
+	}
+	/* Is serdes enabled at all? */
+	if (unlikely(cfg == 0))
+		return -ENODEV;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_get_prtcl(sd, cfg, i) == device)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u64 serdes_prtcl_map = 0;
+	u32 cfg;
+	int lane;
+
+	cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+	cfg >>= sd_prctl_shift;
+	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
+
+	if (!is_serdes_prtcl_valid(sd, cfg))
+		printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+
+		serdes_prtcl_map |= (1ULL << lane_prtcl);
+	}
+
+	/* Set the first bit to indicate serdes has been initialized */
+	serdes_prtcl_map |= (1ULL << NONE);
+
+	return serdes_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	if (!(serdes1_prtcl_map & (1ULL << NONE)))
+		serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+					CONFIG_SYS_FSL_SERDES_ADDR,
+					RCWSR4_SRDS1_PRTCL_MASK,
+					RCWSR4_SRDS1_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	if (!(serdes2_prtcl_map & (1ULL << NONE)))
+		serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+					CONFIG_SYS_FSL_SERDES_ADDR +
+					FSL_SRDS_2 * 0x1000,
+					RCWSR4_SRDS2_PRTCL_MASK,
+					RCWSR4_SRDS2_PRTCL_SHIFT);
+#endif
+}
+
+const char *serdes_clock_to_string(u32 clock)
+{
+	switch (clock) {
+	case SRDS_PLLCR0_RFCK_SEL_100:
+		return "100";
+	case SRDS_PLLCR0_RFCK_SEL_125:
+		return "125";
+	default:
+		return "100";
+	}
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
new file mode 100644
index 000000000..7382aef8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_LS1_SERDES_H
+#define __FSL_LS1_SERDES_H
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_lane_enabled(int lane);
+#endif /* __FSL_LS1_SERDES_H */
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
new file mode 100644
index 000000000..28a794520
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Author: Hongbo Zhang <hongbo.zhang@nxp.com>
+ * This file implements LS102X platform PSCI SYSTEM-SUSPEND function
+ */
+
+#include <config.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/psci.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <fsl_immap.h>
+#include "fsl_epu.h"
+
+#define __secure __section("._secure.text")
+
+#define CCSR_GICD_CTLR			0x1000
+#define CCSR_GICC_CTLR			0x2000
+#define DCSR_RCPM_CG1CR0		0x31c
+#define DCSR_RCPM_CSTTACR0		0xb00
+#define DCFG_CRSTSR_WDRFR		0x8
+#define DDR_RESV_LEN			128
+
+#ifdef CONFIG_LS1_DEEP_SLEEP
+/*
+ * DDR controller initialization training breaks the first 128 bytes of DDR,
+ * save them so that the bootloader can restore them while resuming.
+ */
+static void __secure ls1_save_ddr_head(void)
+{
+	const char *src = (const char *)CONFIG_SYS_SDRAM_BASE;
+	char *dest = (char *)(OCRAM_BASE_S_ADDR + OCRAM_S_SIZE - DDR_RESV_LEN);
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	int i;
+
+	out_le32(&scfg->sparecr[2], dest);
+
+	for (i = 0; i < DDR_RESV_LEN; i++)
+		*dest++ = *src++;
+}
+
+static void __secure ls1_fsm_setup(void)
+{
+	void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+	void *dcsr_rcpm_base = (void *)SYS_FSL_DCSR_RCPM_ADDR;
+
+	out_be32(dcsr_rcpm_base + DCSR_RCPM_CSTTACR0, 0x00001001);
+	out_be32(dcsr_rcpm_base + DCSR_RCPM_CG1CR0, 0x00000001);
+
+	fsl_epu_setup((void *)dcsr_epu_base);
+
+	/* Pull MCKE signal low before enabling deep sleep signal in FPGA */
+	out_be32(dcsr_epu_base + EPECR0, 0x5);
+	out_be32(dcsr_epu_base + EPSMCR15, 0x76300000);
+}
+
+static void __secure ls1_deepsleep_irq_cfg(void)
+{
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+	u32 ippdexpcr0, ippdexpcr1, pmcintecr = 0;
+
+	/* Mask interrupts from GIC */
+	out_be32(&rcpm->nfiqoutr, 0x0ffffffff);
+	out_be32(&rcpm->nirqoutr, 0x0ffffffff);
+	/* Mask deep sleep wake-up interrupts while entering deep sleep */
+	out_be32(&rcpm->dsimskr, 0x0ffffffff);
+
+	ippdexpcr0 = in_be32(&rcpm->ippdexpcr0);
+	/*
+	 * Workaround of errata A-008646
+	 * Errata states that read to register ippdexpcr1 always returns
+	 * zero irrespective of what value is written into it. So its value
+	 * is first saved to a spare register and then read from it
+	 */
+	ippdexpcr1 = in_be32(&scfg->sparecr[7]);
+
+	/*
+	 * To allow OCRAM to be used as wakeup source in deep sleep,
+	 * do not power it down.
+	 */
+	out_be32(&rcpm->ippdexpcr1, ippdexpcr1 | RCPM_IPPDEXPCR1_OCRAM1);
+
+	if (ippdexpcr0 & RCPM_IPPDEXPCR0_ETSEC)
+		pmcintecr |= SCFG_PMCINTECR_ETSECRXG0 |
+			     SCFG_PMCINTECR_ETSECRXG1 |
+			     SCFG_PMCINTECR_ETSECERRG0 |
+			     SCFG_PMCINTECR_ETSECERRG1;
+
+	if (ippdexpcr0 & RCPM_IPPDEXPCR0_GPIO)
+		pmcintecr |= SCFG_PMCINTECR_GPIO;
+
+	if (ippdexpcr1 & RCPM_IPPDEXPCR1_LPUART)
+		pmcintecr |= SCFG_PMCINTECR_LPUART;
+
+	if (ippdexpcr1 & RCPM_IPPDEXPCR1_FLEXTIMER)
+		pmcintecr |= SCFG_PMCINTECR_FTM;
+
+	/* Always set external IRQ pins as wakeup source */
+	pmcintecr |= SCFG_PMCINTECR_IRQ0 | SCFG_PMCINTECR_IRQ1;
+
+	out_be32(&scfg->pmcintlecr, 0);
+	/* Clear PMC interrupt status */
+	out_be32(&scfg->pmcintsr, 0xffffffff);
+	/* Enable wakeup interrupt during deep sleep */
+	out_be32(&scfg->pmcintecr, pmcintecr);
+}
+
+static void __secure ls1_delay(unsigned int loop)
+{
+	while (loop--) {
+		int i = 1000;
+		while (i--)
+			;
+	}
+}
+
+static void __secure ls1_start_fsm(void)
+{
+	void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+	void *ccsr_gic_base = (void *)SYS_FSL_GIC_ADDR;
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	/* Set HRSTCR */
+	setbits_be32(&scfg->hrstcr, 0x80000000);
+
+	/* Place DDR controller in self refresh mode */
+	setbits_be32(&ddr->sdram_cfg_2, 0x80000000);
+
+	ls1_delay(2000);
+
+	/* Set EVT4_B to lock the signal MCKE down */
+	out_be32(dcsr_epu_base + EPECR0, 0x0);
+
+	ls1_delay(2000);
+
+	out_be32(ccsr_gic_base + CCSR_GICD_CTLR, 0x0);
+	out_be32(ccsr_gic_base + CCSR_GICC_CTLR, 0x0);
+
+	/* Enable all EPU Counters */
+	setbits_be32(dcsr_epu_base + EPGCR, 0x80000000);
+
+	/* Enable SCU15 */
+	setbits_be32(dcsr_epu_base + EPECR15, 0x90000004);
+
+	/* Enter WFI mode, and EPU FSM will start */
+	__asm__ __volatile__ ("wfi" : : : "memory");
+
+	/* NEVER ENTER HERE */
+	while (1)
+		;
+}
+
+static void __secure ls1_deep_sleep(u32 entry_point)
+{
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+#ifdef QIXIS_BASE
+	u32 tmp;
+	void *qixis_base = (void *)QIXIS_BASE;
+#endif
+
+	/* Enable cluster to enter the PCL10 state */
+	out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);
+
+	/* Save the first 128 bytes of DDR data */
+	ls1_save_ddr_head();
+
+	/* Save the kernel resume entry */
+	out_le32(&scfg->sparecr[3], entry_point);
+
+	/* Request to put cluster 0 in PCL10 state */
+	setbits_be32(&rcpm->clpcl10setr, RCPM_CLPCL10SETR_C0);
+
+	/* Setup the registers of the EPU FSM for deep sleep */
+	ls1_fsm_setup();
+
+#ifdef QIXIS_BASE
+	/* Connect the EVENT button to IRQ in FPGA */
+	tmp = in_8(qixis_base + QIXIS_CTL_SYS);
+	tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
+	tmp |= QIXIS_CTL_SYS_EVTSW_IRQ;
+	out_8(qixis_base + QIXIS_CTL_SYS, tmp);
+
+	/* Enable deep sleep signals in FPGA */
+	tmp = in_8(qixis_base + QIXIS_PWR_CTL2);
+	tmp |= QIXIS_PWR_CTL2_PCTL;
+	out_8(qixis_base + QIXIS_PWR_CTL2, tmp);
+
+	/* Pull down PCIe RST# */
+	tmp = in_8(qixis_base + QIXIS_RST_FORCE_3);
+	tmp |= QIXIS_RST_FORCE_3_PCIESLOT1;
+	out_8(qixis_base + QIXIS_RST_FORCE_3, tmp);
+#endif
+
+	/* Enable Warm Device Reset */
+	setbits_be32(&scfg->dpslpcr, SCFG_DPSLPCR_WDRR_EN);
+	setbits_be32(&gur->crstsr, DCFG_CRSTSR_WDRFR);
+
+	/* Disable QE */
+	setbits_be32(&gur->devdisr, CCSR_DEVDISR1_QE);
+
+	ls1_deepsleep_irq_cfg();
+
+	psci_v7_flush_dcache_all();
+
+	ls1_start_fsm();
+}
+
+#else
+static void __secure ls1_sleep(void)
+{
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+
+#ifdef QIXIS_BASE
+	u32 tmp;
+	void *qixis_base = (void *)QIXIS_BASE;
+
+	/* Connect the EVENT button to IRQ in FPGA */
+	tmp = in_8(qixis_base + QIXIS_CTL_SYS);
+	tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
+	tmp |= QIXIS_CTL_SYS_EVTSW_IRQ;
+	out_8(qixis_base + QIXIS_CTL_SYS, tmp);
+#endif
+
+	/* Enable cluster to enter the PCL10 state */
+	out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);
+
+	setbits_be32(&rcpm->powmgtcsr, RCPM_POWMGTCSR_LPM20_REQ);
+
+	__asm__ __volatile__ ("wfi" : : : "memory");
+}
+#endif
+
+void __secure ls1_system_suspend(u32 fn, u32 entry_point, u32 context_id)
+{
+#ifdef CONFIG_LS1_DEEP_SLEEP
+	ls1_deep_sleep(entry_point);
+#else
+	ls1_sleep();
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
new file mode 100644
index 000000000..8c030be8b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_ls102xa.h>
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+	[0x00] = {PCIE1, PCIE1, PCIE1, PCIE1},
+	[0x10] = {PCIE1, SATA1, PCIE2, PCIE2},
+	[0x20] = {PCIE1, SGMII_TSEC1, PCIE2, SGMII_TSEC2},
+	[0x30] = {PCIE1, SATA1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x40] = {PCIE1, PCIE1, SATA1, SGMII_TSEC2},
+	[0x50] = {PCIE1, PCIE1, PCIE2, SGMII_TSEC2},
+	[0x60] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x70] = {PCIE1, SATA1, PCIE2, SGMII_TSEC2},
+	[0x80] = {PCIE2, PCIE2, PCIE2, PCIE2},
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+
+	if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_cfg_tbl[prtcl][i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/psci.S b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/psci.S
new file mode 100644
index 000000000..531cfb033
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/psci.S
@@ -0,0 +1,257 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Author: Wang Dongsheng <dongsheng.wang@freescale.com>
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+#include <asm/armv7.h>
+#include <asm/arch-armv7/generictimer.h>
+#include <asm/psci.h>
+
+#define RCPM_TWAITSR		0x04C
+
+#define SCFG_CORE0_SFT_RST      0x130
+#define SCFG_CORESRENCR         0x204
+
+#define DCFG_CCSR_RSTCR			0x0B0
+#define DCFG_CCSR_RSTCR_RESET_REQ	0x2
+#define DCFG_CCSR_BRR			0x0E4
+#define DCFG_CCSR_SCRATCHRW1		0x200
+
+#define PSCI_FN_PSCI_VERSION_FEATURE_MASK	0x0
+#define PSCI_FN_CPU_SUSPEND_FEATURE_MASK	0x0
+#define PSCI_FN_CPU_OFF_FEATURE_MASK		0x0
+#define PSCI_FN_CPU_ON_FEATURE_MASK		0x0
+#define PSCI_FN_AFFINITY_INFO_FEATURE_MASK	0x0
+#define PSCI_FN_SYSTEM_OFF_FEATURE_MASK		0x0
+#define PSCI_FN_SYSTEM_RESET_FEATURE_MASK	0x0
+#define PSCI_FN_SYSTEM_SUSPEND_FEATURE_MASK	0x0
+
+	.pushsection ._secure.text, "ax"
+
+	.arch_extension sec
+
+	.align	5
+
+#define	ONE_MS		(COUNTER_FREQUENCY / 1000)
+#define	RESET_WAIT	(30 * ONE_MS)
+
+.globl	psci_version
+psci_version:
+	movw	r0, #0
+	movt	r0, #1
+
+	bx	lr
+
+_ls102x_psci_supported_table:
+	.word	ARM_PSCI_0_2_FN_PSCI_VERSION
+	.word	PSCI_FN_PSCI_VERSION_FEATURE_MASK
+	.word	ARM_PSCI_0_2_FN_CPU_SUSPEND
+	.word	PSCI_FN_CPU_SUSPEND_FEATURE_MASK
+	.word	ARM_PSCI_0_2_FN_CPU_OFF
+	.word	PSCI_FN_CPU_OFF_FEATURE_MASK
+	.word	ARM_PSCI_0_2_FN_CPU_ON
+	.word	PSCI_FN_CPU_ON_FEATURE_MASK
+	.word	ARM_PSCI_0_2_FN_AFFINITY_INFO
+	.word	PSCI_FN_AFFINITY_INFO_FEATURE_MASK
+	.word	ARM_PSCI_0_2_FN_SYSTEM_OFF
+	.word	PSCI_FN_SYSTEM_OFF_FEATURE_MASK
+	.word	ARM_PSCI_0_2_FN_SYSTEM_RESET
+	.word	PSCI_FN_SYSTEM_RESET_FEATURE_MASK
+	.word	ARM_PSCI_1_0_FN_SYSTEM_SUSPEND
+	.word	PSCI_FN_SYSTEM_SUSPEND_FEATURE_MASK
+	.word	0
+	.word	ARM_PSCI_RET_NI
+
+.globl	psci_features
+psci_features:
+	adr	r2, _ls102x_psci_supported_table
+1:	ldr	r3, [r2]
+	cmp	r3, #0
+	beq	out_psci_features
+	cmp	r1, r3
+	addne	r2, r2, #8
+	bne	1b
+
+out_psci_features:
+	ldr	r0, [r2, #4]
+	bx	lr
+
+@ r0: return value ARM_PSCI_RET_SUCCESS or ARM_PSCI_RET_INVAL
+@ r1: input target CPU ID in MPIDR format, original value in r1 may be dropped
+@ r4: output validated CPU ID if ARM_PSCI_RET_SUCCESS returns, meaningless for
+@ ARM_PSCI_RET_INVAL,suppose caller saves r4 before calling
+LENTRY(psci_check_target_cpu_id)
+	@ Get the real CPU number
+	and	r4, r1, #0xff
+	mov	r0, #ARM_PSCI_RET_INVAL
+
+	@ Bit[31:24], bits must be zero.
+	tst	r1, #0xff000000
+	bxne	lr
+
+	@ Affinity level 2 - Cluster: only one cluster in LS1021xa.
+	tst	r1, #0xff0000
+	bxne	lr
+
+	@ Affinity level 1 - Processors: should be in 0xf00 format.
+	lsr	r1, r1, #8
+	teq	r1, #0xf
+	bxne	lr
+
+	@ Affinity level 0 - CPU: only 0, 1 are valid in LS1021xa.
+	cmp	r4, #2
+	bxge	lr
+
+	mov	r0, #ARM_PSCI_RET_SUCCESS
+	bx	lr
+ENDPROC(psci_check_target_cpu_id)
+
+	@ r1 = target CPU
+	@ r2 = target PC
+.globl	psci_cpu_on
+psci_cpu_on:
+	push	{r4, r5, r6, lr}
+
+	@ Clear and Get the correct CPU number
+	@ r1 = 0xf01
+	bl	psci_check_target_cpu_id
+	cmp	r0, #ARM_PSCI_RET_INVAL
+	beq	out_psci_cpu_on
+
+	mov	r0, r4
+	mov	r1, r2
+	mov	r2, r3
+	bl	psci_save
+	mov	r1, r4
+
+	@ Get DCFG base address
+	movw	r4, #(CONFIG_SYS_FSL_GUTS_ADDR & 0xffff)
+	movt	r4, #(CONFIG_SYS_FSL_GUTS_ADDR >> 16)
+
+	@ Detect target CPU state
+	ldr	r2, [r4, #DCFG_CCSR_BRR]
+	rev	r2, r2
+	lsr	r2, r2, r1
+	ands	r2, r2, #1
+	beq	holdoff_release
+
+	@ Reset target CPU
+	@ Get SCFG base address
+	movw	r0, #(CONFIG_SYS_FSL_SCFG_ADDR & 0xffff)
+	movt	r0, #(CONFIG_SYS_FSL_SCFG_ADDR >> 16)
+
+	@ Enable CORE Soft Reset
+	movw	r5, #0
+	movt	r5, #(1 << 15)
+	rev	r5, r5
+	str	r5, [r0, #SCFG_CORESRENCR]
+
+	@ Get CPUx offset register
+	mov	r6, #0x4
+	mul	r6, r6, r1
+	add	r2, r0, r6
+
+	@ Do reset on target CPU
+	movw	r5, #0
+	movt	r5, #(1 << 15)
+	rev	r5, r5
+	str	r5, [r2, #SCFG_CORE0_SFT_RST]
+
+	@ Wait target CPU up
+	timer_wait	r2, RESET_WAIT
+
+	@ Disable CORE soft reset
+	mov	r5, #0
+	str	r5, [r0, #SCFG_CORESRENCR]
+
+holdoff_release:
+	@ Release on target CPU
+	ldr	r2, [r4, #DCFG_CCSR_BRR]
+	mov	r6, #1
+	lsl	r6, r6, r1	@ 32 bytes per CPU
+
+	rev	r6, r6
+	orr	r2, r2, r6
+	str	r2, [r4, #DCFG_CCSR_BRR]
+
+	@ Set secondary boot entry
+	ldr	r6, =psci_cpu_entry
+	rev	r6, r6
+	str	r6, [r4, #DCFG_CCSR_SCRATCHRW1]
+
+	isb
+	dsb
+
+	@ Return
+	mov	r0, #ARM_PSCI_RET_SUCCESS
+
+out_psci_cpu_on:
+	pop	{r4, r5, r6, lr}
+	bx	lr
+
+.globl	psci_cpu_off
+psci_cpu_off:
+	bl	psci_cpu_off_common
+
+1:	wfi
+	b	1b
+
+.globl	psci_affinity_info
+psci_affinity_info:
+	push	{lr}
+
+	mov	r0, #ARM_PSCI_RET_INVAL
+
+	@ Verify Affinity level
+	cmp	r2, #0
+	bne	out_affinity_info
+
+	bl	psci_check_target_cpu_id
+	cmp	r0, #ARM_PSCI_RET_INVAL
+	beq	out_affinity_info
+	mov	r1, r4
+
+	@ Get RCPM base address
+	movw	r4, #(CONFIG_SYS_FSL_RCPM_ADDR & 0xffff)
+	movt	r4, #(CONFIG_SYS_FSL_RCPM_ADDR >> 16)
+
+	mov	r0, #PSCI_AFFINITY_LEVEL_ON
+
+	@ Detect target CPU state
+	ldr	r2, [r4, #RCPM_TWAITSR]
+	rev	r2, r2
+	lsr	r2, r2, r1
+	ands	r2, r2, #1
+	beq	out_affinity_info
+
+	mov	r0, #PSCI_AFFINITY_LEVEL_OFF
+
+out_affinity_info:
+	pop	{pc}
+
+.globl	psci_system_reset
+psci_system_reset:
+	@ Get DCFG base address
+	movw	r1, #(CONFIG_SYS_FSL_GUTS_ADDR & 0xffff)
+	movt	r1, #(CONFIG_SYS_FSL_GUTS_ADDR >> 16)
+
+	mov	r2, #DCFG_CCSR_RSTCR_RESET_REQ
+	rev	r2, r2
+	str	r2, [r1, #DCFG_CCSR_RSTCR]
+
+1:	wfi
+	b	1b
+
+.globl	psci_system_suspend
+psci_system_suspend:
+	push	{lr}
+
+	bl	ls1_system_suspend
+
+	pop	{pc}
+
+	.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/soc.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/soc.c
new file mode 100644
index 000000000..8a95ee86a
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/ls102xa_soc.h>
+#include <asm/arch/ls102xa_stream_id.h>
+#include <fsl_csu.h>
+#include <fsl_ddr_sdram.h>
+
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
+};
+
+struct smmu_stream_id dev_stream_id[] = {
+	{ 0x100, 0x01, "ETSEC MAC1" },
+	{ 0x104, 0x02, "ETSEC MAC2" },
+	{ 0x108, 0x03, "ETSEC MAC3" },
+	{ 0x10c, 0x04, "PEX1" },
+	{ 0x110, 0x05, "PEX2" },
+	{ 0x114, 0x06, "qDMA" },
+	{ 0x118, 0x07, "SATA" },
+	{ 0x11c, 0x08, "USB3" },
+	{ 0x120, 0x09, "QE" },
+	{ 0x124, 0x0a, "eSDHC" },
+	{ 0x128, 0x0b, "eMA" },
+	{ 0x14c, 0x0c, "2D-ACE" },
+	{ 0x150, 0x0d, "USB2" },
+	{ 0x18c, 0x0e, "DEBUG" },
+};
+
+unsigned int get_soc_major_rev(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int svr, major;
+
+	svr = in_be32(&gur->svr);
+	major = SVR_MAJ(svr);
+
+	return major;
+}
+
+static void erratum_a009008(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009008
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	clrsetbits_be32(scfg + SCFG_USB3PRM1CR / 4,
+			0xF << 6,
+			SCFG_USB_TXVREFTUNE << 6);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
+}
+
+static void erratum_a009798(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009798
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	clrbits_be32(scfg + SCFG_USB3PRM1CR / 4,
+			SCFG_USB_SQRXTUNE_MASK << 23);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
+}
+
+static void erratum_a008997(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008997
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	clrsetbits_be32(scfg + SCFG_USB3PRM2CR / 4,
+			SCFG_USB_PCSTXSWINGFULL_MASK,
+			SCFG_USB_PCSTXSWINGFULL_VAL);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */
+}
+
+static void erratum_a009007(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009007
+	void __iomem *usb_phy = (void __iomem *)USB_PHY_BASE;
+
+	out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1);
+	out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2);
+	out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3);
+	out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */
+}
+
+static void erratum_a008850_early(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
+	/* part 1 of 2 */
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	/* disables propagation of barrier transactions to DDRC from CCI400 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
+
+	/* disable the re-ordering in DDRC */
+	out_be32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
+#endif
+}
+
+void erratum_a008850_post(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
+	/* part 2 of 2 */
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	u32 tmp;
+
+	/* enable propagation of barrier transactions to DDRC from CCI400 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+	/* enable the re-ordering in DDRC */
+	tmp = in_be32(&ddr->eor);
+	tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
+	out_be32(&ddr->eor, tmp);
+#endif
+}
+
+void s_init(void)
+{
+}
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+void erratum_a010315(void)
+{
+	int i;
+
+	for (i = PCIE1; i <= PCIE2; i++)
+		if (!is_serdes_configured(i)) {
+			debug("PCIe%d: disabled all R/W permission!\n", i);
+			set_pcie_ns_access(i, 0);
+		}
+}
+#endif
+
+int arch_soc_init(void)
+{
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+					CONFIG_SYS_CCI400_OFFSET);
+	unsigned int major;
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
+#ifdef CONFIG_FSL_QSPI
+	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
+#endif
+
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+	out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
+#endif
+
+	/* Configure Little endian for SAI, ASRC and SPDIF */
+	out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE);
+
+	/*
+	 * Enable snoop requests and DVM message requests for
+	 * All the slave insterfaces.
+	 */
+	out_le32(&cci->slave[0].snoop_ctrl,
+		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+	out_le32(&cci->slave[1].snoop_ctrl,
+		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+	out_le32(&cci->slave[2].snoop_ctrl,
+		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+	out_le32(&cci->slave[4].snoop_ctrl,
+		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+
+	major = get_soc_major_rev();
+	if (major == SOC_MAJOR_VER_1_0) {
+		/*
+		 * Set CCI-400 Slave interface S1, S2 Shareable Override
+		 * Register All transactions are treated as non-shareable
+		 */
+		out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
+		out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
+	}
+
+	/* Enable all the snoop signal for various masters */
+	out_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR |
+				SCFG_SNPCNFGCR_DCU_RD_WR |
+				SCFG_SNPCNFGCR_SATA_RD_WR |
+				SCFG_SNPCNFGCR_USB3_RD_WR |
+				SCFG_SNPCNFGCR_DBG_RD_WR |
+				SCFG_SNPCNFGCR_EDMA_SNP);
+
+	/*
+	 * Memory controller require a register write before being enabled.
+	 * Affects: DDR
+	 * Register: EDDRTQCFG
+	 * Description: Memory controller performance is not optimal with
+	 *		default internal target queue register values.
+	 * Workaround: Write a value of 63b2_0042h to address: 157_020Ch.
+	 */
+	out_be32(&scfg->eddrtqcfg, 0x63b20042);
+
+	/* Erratum */
+	erratum_a008850_early();
+	erratum_a009008();
+	erratum_a009798();
+	erratum_a008997();
+	erratum_a009007();
+
+	return 0;
+}
+
+int ls102xa_smmu_stream_id_init(void)
+{
+	ls1021x_config_caam_stream_id(sec_liodn_tbl,
+				      ARRAY_SIZE(sec_liodn_tbl));
+
+	ls102xa_config_smmu_stream_id(dev_stream_id,
+				      ARRAY_SIZE(dev_stream_id));
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/spl.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/spl.c
new file mode 100644
index 000000000..308536c33
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/spl.c
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <spl.h>
+
+u32 spl_boot_device(void)
+{
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	return BOOT_DEVICE_MMC1;
+#endif
+	return BOOT_DEVICE_NAND;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/timer.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/timer.c
new file mode 100644
index 000000000..d79bf105f
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/timer.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+	ulong ticks;
+
+	if (usec < 1000)
+		ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+	else
+		ticks = ((usec / 10) * (get_tbclk() / 100000));
+
+	return ticks;
+}
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, freq);
+
+	return tick;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long usec)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	usec = usec * freq  + 999999;
+	do_div(usec, 1000000);
+
+	return usec;
+}
+
+int timer_init(void)
+{
+	struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
+	unsigned long ctrl, freq;
+	unsigned long long val;
+
+	/* Enable System Counter */
+	writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
+
+	freq = COUNTER_FREQUENCY;
+	asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+	/* Set PL1 Physical Timer Ctrl */
+	ctrl = ARCH_TIMER_CTRL_ENABLE;
+	asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
+
+	/* Set PL1 Physical Comp Value */
+	val = TIMER_COMP_VAL;
+	asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val));
+
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+
+	return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+	unsigned long long now;
+
+	asm("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now));
+
+	gd->arch.tbl = (unsigned long)(now & 0xffffffff);
+	gd->arch.tbu = (unsigned long)(now >> 32);
+
+	return now;
+}
+
+unsigned long get_timer(ulong base)
+{
+	return tick_to_time(get_ticks()) - base;
+}
+
+/* delay x useconds and preserve advance timstamp value */
+void __udelay(unsigned long usec)
+{
+	unsigned long long start;
+	unsigned long tmo;
+
+	start = get_ticks();			/* get current timestamp */
+	tmo = us_to_tick(usec);			/* convert usecs to ticks */
+
+	while ((get_ticks() - start) < tmo)
+		;				/* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+unsigned long get_tbclk(void)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	return freq;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/mpu_v7r.c b/roms/u-boot/arch/arm/cpu/armv7/mpu_v7r.c
new file mode 100644
index 000000000..57ab640e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/mpu_v7r.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Cortex-R Memory Protection Unit specific code
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <asm/armv7.h>
+#include <asm/system.h>
+#include <asm/barriers.h>
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+
+#include <asm/armv7_mpu.h>
+
+/* MPU Type register definitions */
+#define MPUIR_S_SHIFT		0
+#define MPUIR_S_MASK		BIT(MPUIR_S_SHIFT)
+#define MPUIR_DREGION_SHIFT	8
+#define MPUIR_DREGION_MASK	(0xff << 8)
+
+/**
+ * Note:
+ * The Memory Protection Unit(MPU) allows to partition memory into regions
+ * and set individual protection attributes for each region. In absence
+ * of MPU a default map[1] will take effect. make sure to run this code
+ * from a region which has execution permissions by default.
+ * [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0460d/I1002400.html
+ */
+
+void disable_mpu(void)
+{
+	u32 reg;
+
+	reg = get_cr();
+	reg &= ~CR_M;
+	dsb();
+	set_cr(reg);
+	isb();
+}
+
+void enable_mpu(void)
+{
+	u32 reg;
+
+	reg = get_cr();
+	reg |= CR_M;
+	dsb();
+	set_cr(reg);
+	isb();
+}
+
+int mpu_enabled(void)
+{
+	return get_cr() & CR_M;
+}
+
+void mpu_config(struct mpu_region_config *rgn)
+{
+	u32 attr, val;
+
+	attr = get_attr_encoding(rgn->mr_attr);
+
+	/* MPU Region Number Register */
+	asm volatile ("mcr p15, 0, %0, c6, c2, 0" : : "r" (rgn->region_no));
+
+	/* MPU Region Base Address Register */
+	asm volatile ("mcr p15, 0, %0, c6, c1, 0" : : "r" (rgn->start_addr));
+
+	/* MPU Region Size and Enable Register */
+	if (rgn->reg_size)
+		val = (rgn->reg_size << REGION_SIZE_SHIFT) | ENABLE_REGION;
+	else
+		val = DISABLE_REGION;
+	asm volatile ("mcr p15, 0, %0, c6, c1, 2" : : "r" (val));
+
+	/* MPU Region Access Control Register */
+	val = rgn->xn << XN_SHIFT | rgn->ap << AP_SHIFT | attr;
+	asm volatile ("mcr p15, 0, %0, c6, c1, 4" : : "r" (val));
+}
+
+void setup_mpu_regions(struct mpu_region_config *rgns, u32 num_rgns)
+{
+	u32 num, i;
+
+	asm volatile ("mrc p15, 0, %0, c0, c0, 4" : "=r" (num));
+	num = (num & MPUIR_DREGION_MASK) >> MPUIR_DREGION_SHIFT;
+	/* Regions to be configured cannot be greater than available regions */
+	if (num < num_rgns)
+		num_rgns = num;
+	/**
+	 * Assuming dcache might not be enabled at this point, disabling
+	 * and invalidating only icache.
+	 */
+	icache_disable();
+	invalidate_icache_all();
+
+	disable_mpu();
+
+	for (i = 0; i < num_rgns; i++)
+		mpu_config(&rgns[i]);
+
+	enable_mpu();
+
+	icache_enable();
+}
+
+void enable_caches(void)
+{
+	/*
+	 * setup_mpu_regions() might have enabled Icache. So add a check
+	 * before enabling Icache
+	 */
+	if (!icache_status())
+		icache_enable();
+	dcache_enable();
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/nonsec_virt.S b/roms/u-boot/arch/arm/cpu/armv7/nonsec_virt.S
new file mode 100644
index 000000000..1773fae20
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/nonsec_virt.S
@@ -0,0 +1,225 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * code for switching cores into non-secure state and into HYP mode
+ *
+ * Copyright (c) 2013	Andre Przywara <andre.przywara@linaro.org>
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/gic.h>
+#include <asm/armv7.h>
+#include <asm/proc-armv/ptrace.h>
+
+.arch_extension sec
+.arch_extension virt
+
+	.pushsection ._secure.text, "ax"
+
+	.align	5
+/* the vector table for secure state and HYP mode */
+_monitor_vectors:
+	.word 0	/* reset */
+	.word 0 /* undef */
+	adr pc, _secure_monitor
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+
+.macro is_cpu_virt_capable	tmp
+	mrc	p15, 0, \tmp, c0, c1, 1		@ read ID_PFR1
+	and	\tmp, \tmp, #CPUID_ARM_VIRT_MASK	@ mask virtualization bits
+	cmp	\tmp, #(1 << CPUID_ARM_VIRT_SHIFT)
+.endm
+
+/*
+ * secure monitor handler
+ * U-Boot calls this "software interrupt" in start.S
+ * This is executed on a "smc" instruction, we use a "smc #0" to switch
+ * to non-secure state.
+ * r0, r1, r2: passed to the callee
+ * ip: target PC
+ */
+_secure_monitor:
+#ifdef CONFIG_ARMV7_PSCI
+	ldr	r5, =_psci_vectors		@ Switch to the next monitor
+	mcr	p15, 0, r5, c12, c0, 1
+	isb
+
+	@ Obtain a secure stack
+	bl	psci_stack_setup
+
+	@ Configure the PSCI backend
+	push	{r0, r1, r2, ip}
+	bl	psci_arch_init
+	pop	{r0, r1, r2, ip}
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_773022
+	mrc	p15, 0, r5, c1, c0, 1
+	orr	r5, r5, #(1 << 1)
+	mcr	p15, 0, r5, c1, c0, 1
+	isb
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_774769
+	mrc	p15, 0, r5, c1, c0, 1
+	orr	r5, r5, #(1 << 25)
+	mcr	p15, 0, r5, c1, c0, 1
+	isb
+#endif
+
+	mrc	p15, 0, r5, c1, c1, 0		@ read SCR
+	bic	r5, r5, #0x4a			@ clear IRQ, EA, nET bits
+	orr	r5, r5, #0x31			@ enable NS, AW, FW bits
+						@ FIQ preserved for secure mode
+	mov	r6, #SVC_MODE			@ default mode is SVC
+	is_cpu_virt_capable r4
+#ifdef CONFIG_ARMV7_VIRT
+	orreq	r5, r5, #0x100			@ allow HVC instruction
+	moveq	r6, #HYP_MODE			@ Enter the kernel as HYP
+	mrseq	r3, sp_svc
+	msreq	sp_hyp, r3			@ migrate SP
+#endif
+
+	mcr	p15, 0, r5, c1, c1, 0		@ write SCR (with NS bit set)
+	isb
+
+	bne	1f
+
+	@ Reset CNTVOFF to 0 before leaving monitor mode
+	mrc	p15, 0, r4, c0, c1, 1		@ read ID_PFR1
+	ands	r4, r4, #CPUID_ARM_GENTIMER_MASK	@ test arch timer bits
+	movne	r4, #0
+	mcrrne	p15, 4, r4, r4, c14		@ Reset CNTVOFF to zero
+1:
+	mov	lr, ip
+	mov	ip, #(F_BIT | I_BIT | A_BIT)	@ Set A, I and F
+	tst	lr, #1				@ Check for Thumb PC
+	orrne	ip, ip, #T_BIT			@ Set T if Thumb
+	orr	ip, ip, r6			@ Slot target mode in
+	msr	spsr_cxfs, ip			@ Set full SPSR
+	movs	pc, lr				@ ERET to non-secure
+
+ENTRY(_do_nonsec_entry)
+	mov	ip, r0
+	mov	r0, r1
+	mov	r1, r2
+	mov	r2, r3
+	smc	#0
+ENDPROC(_do_nonsec_entry)
+
+.macro get_cbar_addr	addr
+#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
+	ldr	\addr, =CONFIG_ARM_GIC_BASE_ADDRESS
+#else
+	mrc	p15, 4, \addr, c15, c0, 0	@ read CBAR
+	bfc	\addr, #0, #15			@ clear reserved bits
+#endif
+.endm
+
+.macro get_gicd_addr	addr
+	get_cbar_addr	\addr
+	add	\addr, \addr, #GIC_DIST_OFFSET	@ GIC dist i/f offset
+.endm
+
+.macro get_gicc_addr	addr, tmp
+	get_cbar_addr	\addr
+	is_cpu_virt_capable \tmp
+	movne	\tmp, #GIC_CPU_OFFSET_A9	@ GIC CPU offset for A9
+	moveq	\tmp, #GIC_CPU_OFFSET_A15	@ GIC CPU offset for A15/A7
+	add	\addr, \addr, \tmp
+.endm
+
+#ifndef CONFIG_ARMV7_PSCI
+/*
+ * Secondary CPUs start here and call the code for the core specific parts
+ * of the non-secure and HYP mode transition. The GIC distributor specific
+ * code has already been executed by a C function before.
+ * Then they go back to wfi and wait to be woken up by the kernel again.
+ */
+ENTRY(_smp_pen)
+	cpsid	i
+	cpsid	f
+
+	bl	_nonsec_init
+
+	adr	r0, _smp_pen			@ do not use this address again
+	b	smp_waitloop			@ wait for IPIs, board specific
+ENDPROC(_smp_pen)
+#endif
+
+/*
+ * Switch a core to non-secure state.
+ *
+ *  1. initialize the GIC per-core interface
+ *  2. allow coprocessor access in non-secure modes
+ *
+ * Called from smp_pen by secondary cores and directly by the BSP.
+ * Do not assume that the stack is available and only use registers
+ * r0-r3 and r12.
+ *
+ * PERIPHBASE is used to get the GIC address. This could be 40 bits long,
+ * though, but we check this in C before calling this function.
+ */
+ENTRY(_nonsec_init)
+	get_gicd_addr	r3
+
+	mvn	r1, #0				@ all bits to 1
+	str	r1, [r3, #GICD_IGROUPRn]	@ allow private interrupts
+
+	get_gicc_addr	r3, r1
+
+	mov	r1, #3				@ Enable both groups
+	str	r1, [r3, #GICC_CTLR]		@ and clear all other bits
+	mov	r1, #0xff
+	str	r1, [r3, #GICC_PMR]		@ set priority mask register
+
+	mrc	p15, 0, r0, c1, c1, 2
+	movw	r1, #0x3fff
+	movt	r1, #0x0004
+	orr	r0, r0, r1
+	mcr	p15, 0, r0, c1, c1, 2		@ NSACR = all copros to non-sec
+
+/* The CNTFRQ register of the generic timer needs to be
+ * programmed in secure state. Some primary bootloaders / firmware
+ * omit this, so if the frequency is provided in the configuration,
+ * we do this here instead.
+ * But first check if we have the generic timer.
+ */
+#ifdef COUNTER_FREQUENCY
+	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
+	and	r0, r0, #CPUID_ARM_GENTIMER_MASK	@ mask arch timer bits
+	cmp	r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
+	ldreq	r1, =COUNTER_FREQUENCY
+	mcreq	p15, 0, r1, c14, c0, 0		@ write CNTFRQ
+#endif
+
+	adr	r1, _monitor_vectors
+	mcr	p15, 0, r1, c12, c0, 1		@ set MVBAR to secure vectors
+	isb
+
+	mov	r0, r3				@ return GICC address
+	bx	lr
+ENDPROC(_nonsec_init)
+
+#ifdef CONFIG_SMP_PEN_ADDR
+/* void __weak smp_waitloop(unsigned previous_address); */
+ENTRY(smp_waitloop)
+	wfi
+	ldr	r1, =CONFIG_SMP_PEN_ADDR	@ load start address
+	ldr	r1, [r1]
+#ifdef CONFIG_PEN_ADDR_BIG_ENDIAN
+	rev	r1, r1
+#endif
+	cmp	r0, r1			@ make sure we dont execute this code
+	beq	smp_waitloop		@ again (due to a spurious wakeup)
+	mov	r0, r1
+	b	_do_nonsec_entry
+ENDPROC(smp_waitloop)
+.weak smp_waitloop
+#endif
+
+	.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv7/psci-common.c b/roms/u-boot/arch/arm/cpu/armv7/psci-common.c
new file mode 100644
index 000000000..a328b2bc0
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/psci-common.c
@@ -0,0 +1,46 @@
+/*
+ * Common PSCI functions
+ *
+ * Copyright (C) 2016 Chen-Yu Tsai
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <config.h>
+#include <asm/armv7.h>
+#include <asm/macro.h>
+#include <asm/psci.h>
+#include <asm/secure.h>
+#include <linux/linkage.h>
+
+static u32 psci_target_pc[CONFIG_ARMV7_PSCI_NR_CPUS] __secure_data = { 0 };
+static u32 psci_context_id[CONFIG_ARMV7_PSCI_NR_CPUS] __secure_data = { 0 };
+
+void __secure psci_save(int cpu, u32 pc, u32 context_id)
+{
+	psci_target_pc[cpu] = pc;
+	psci_context_id[cpu] = context_id;
+	dsb();
+}
+
+u32 __secure psci_get_target_pc(int cpu)
+{
+	return psci_target_pc[cpu];
+}
+
+u32 __secure psci_get_context_id(int cpu)
+{
+	return psci_context_id[cpu];
+}
+
diff --git a/roms/u-boot/arch/arm/cpu/armv7/psci.S b/roms/u-boot/arch/arm/cpu/armv7/psci.S
new file mode 100644
index 000000000..983cd9044
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/psci.S
@@ -0,0 +1,347 @@
+/*
+ * Copyright (C) 2013,2014 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/psci.h>
+
+	.pushsection ._secure.text, "ax"
+
+	.arch_extension	sec
+
+	.align	5
+	.globl _psci_vectors
+_psci_vectors:
+	b	default_psci_vector	@ reset
+	b	default_psci_vector	@ undef
+	b	_smc_psci		@ smc
+	b	default_psci_vector	@ pabort
+	b	default_psci_vector	@ dabort
+	b	default_psci_vector	@ hyp
+	b	default_psci_vector	@ irq
+	b	psci_fiq_enter		@ fiq
+
+ENTRY(psci_fiq_enter)
+	movs	pc, lr
+ENDPROC(psci_fiq_enter)
+.weak psci_fiq_enter
+
+ENTRY(default_psci_vector)
+	movs	pc, lr
+ENDPROC(default_psci_vector)
+.weak default_psci_vector
+
+ENTRY(psci_version)
+ENTRY(psci_cpu_suspend)
+ENTRY(psci_cpu_off)
+ENTRY(psci_cpu_on)
+ENTRY(psci_affinity_info)
+ENTRY(psci_migrate)
+ENTRY(psci_migrate_info_type)
+ENTRY(psci_migrate_info_up_cpu)
+ENTRY(psci_system_off)
+ENTRY(psci_system_reset)
+ENTRY(psci_features)
+ENTRY(psci_cpu_freeze)
+ENTRY(psci_cpu_default_suspend)
+ENTRY(psci_node_hw_state)
+ENTRY(psci_system_suspend)
+ENTRY(psci_set_suspend_mode)
+ENTRY(psi_stat_residency)
+ENTRY(psci_stat_count)
+	mov	r0, #ARM_PSCI_RET_NI	@ Return -1 (Not Implemented)
+	mov	pc, lr
+ENDPROC(psci_stat_count)
+ENDPROC(psi_stat_residency)
+ENDPROC(psci_set_suspend_mode)
+ENDPROC(psci_system_suspend)
+ENDPROC(psci_node_hw_state)
+ENDPROC(psci_cpu_default_suspend)
+ENDPROC(psci_cpu_freeze)
+ENDPROC(psci_features)
+ENDPROC(psci_system_reset)
+ENDPROC(psci_system_off)
+ENDPROC(psci_migrate_info_up_cpu)
+ENDPROC(psci_migrate_info_type)
+ENDPROC(psci_migrate)
+ENDPROC(psci_affinity_info)
+ENDPROC(psci_cpu_on)
+ENDPROC(psci_cpu_off)
+ENDPROC(psci_cpu_suspend)
+ENDPROC(psci_version)
+.weak psci_version
+.weak psci_cpu_suspend
+.weak psci_cpu_off
+.weak psci_cpu_on
+.weak psci_affinity_info
+.weak psci_migrate
+.weak psci_migrate_info_type
+.weak psci_migrate_info_up_cpu
+.weak psci_system_off
+.weak psci_system_reset
+.weak psci_features
+.weak psci_cpu_freeze
+.weak psci_cpu_default_suspend
+.weak psci_node_hw_state
+.weak psci_system_suspend
+.weak psci_set_suspend_mode
+.weak psi_stat_residency
+.weak psci_stat_count
+
+_psci_table:
+	.word	ARM_PSCI_FN_CPU_SUSPEND
+	.word	psci_cpu_suspend
+	.word	ARM_PSCI_FN_CPU_OFF
+	.word	psci_cpu_off
+	.word	ARM_PSCI_FN_CPU_ON
+	.word	psci_cpu_on
+	.word	ARM_PSCI_FN_MIGRATE
+	.word	psci_migrate
+	.word	ARM_PSCI_0_2_FN_PSCI_VERSION
+	.word	psci_version
+	.word	ARM_PSCI_0_2_FN_CPU_SUSPEND
+	.word	psci_cpu_suspend
+	.word	ARM_PSCI_0_2_FN_CPU_OFF
+	.word	psci_cpu_off
+	.word	ARM_PSCI_0_2_FN_CPU_ON
+	.word	psci_cpu_on
+	.word	ARM_PSCI_0_2_FN_AFFINITY_INFO
+	.word	psci_affinity_info
+	.word	ARM_PSCI_0_2_FN_MIGRATE
+	.word	psci_migrate
+	.word	ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE
+	.word	psci_migrate_info_type
+	.word	ARM_PSCI_0_2_FN_MIGRATE_INFO_UP_CPU
+	.word	psci_migrate_info_up_cpu
+	.word	ARM_PSCI_0_2_FN_SYSTEM_OFF
+	.word	psci_system_off
+	.word	ARM_PSCI_0_2_FN_SYSTEM_RESET
+	.word	psci_system_reset
+	.word	ARM_PSCI_1_0_FN_PSCI_FEATURES
+	.word	psci_features
+	.word	ARM_PSCI_1_0_FN_CPU_FREEZE
+	.word	psci_cpu_freeze
+	.word	ARM_PSCI_1_0_FN_CPU_DEFAULT_SUSPEND
+	.word	psci_cpu_default_suspend
+	.word	ARM_PSCI_1_0_FN_NODE_HW_STATE
+	.word	psci_node_hw_state
+	.word	ARM_PSCI_1_0_FN_SYSTEM_SUSPEND
+	.word	psci_system_suspend
+	.word	ARM_PSCI_1_0_FN_SET_SUSPEND_MODE
+	.word	psci_set_suspend_mode
+	.word	ARM_PSCI_1_0_FN_STAT_RESIDENCY
+	.word	psi_stat_residency
+	.word	ARM_PSCI_1_0_FN_STAT_COUNT
+	.word	psci_stat_count
+	.word	0
+	.word	0
+
+_smc_psci:
+	push	{r4-r7,lr}
+
+	@ Switch to secure
+	mrc	p15, 0, r7, c1, c1, 0
+	bic	r4, r7, #1
+	mcr	p15, 0, r4, c1, c1, 0
+	isb
+
+	adr	r4, _psci_table
+1:	ldr	r5, [r4]		@ Load PSCI function ID
+	ldr	r6, [r4, #4]		@ Load target PC
+	cmp	r5, #0			@ If reach the end, bail out
+	moveq	r0, #ARM_PSCI_RET_INVAL	@ Return -2 (Invalid)
+	beq	2f
+	cmp	r0, r5			@ If not matching, try next entry
+	addne	r4, r4, #8
+	bne	1b
+
+	blx	r6			@ Execute PSCI function
+
+	@ Switch back to non-secure
+2:	mcr	p15, 0, r7, c1, c1, 0
+
+	pop	{r4-r7, lr}
+	movs	pc, lr			@ Return to the kernel
+
+@ Requires dense and single-cluster CPU ID space
+ENTRY(psci_get_cpu_id)
+	mrc	p15, 0, r0, c0, c0, 5	/* read MPIDR */
+	and	r0, r0, #0xff		/* return CPU ID in cluster */
+	bx	lr
+ENDPROC(psci_get_cpu_id)
+.weak psci_get_cpu_id
+
+/* Imported from Linux kernel */
+ENTRY(psci_v7_flush_dcache_all)
+	stmfd	sp!, {r4-r5, r7, r9-r11, lr}
+	dmb					@ ensure ordering with previous memory accesses
+	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
+	ands	r3, r0, #0x7000000		@ extract loc from clidr
+	mov	r3, r3, lsr #23			@ left align loc bit field
+	beq	finished			@ if loc is 0, then no need to clean
+	mov	r10, #0				@ start clean at cache level 0
+flush_levels:
+	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
+	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
+	and	r1, r1, #7			@ mask of the bits for current cache only
+	cmp	r1, #2				@ see what cache we have at this level
+	blt	skip				@ skip if no cache, or just i-cache
+	mrs     r9, cpsr			@ make cssr&csidr read atomic
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	isb					@ isb to sych the new cssr&csidr
+	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
+	msr     cpsr_c, r9
+	and	r2, r1, #7			@ extract the length of the cache lines
+	add	r2, r2, #4			@ add 4 (line length offset)
+	ldr	r4, =0x3ff
+	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
+	clz	r5, r4				@ find bit position of way size increment
+	ldr	r7, =0x7fff
+	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+loop1:
+	mov	r9, r7				@ create working copy of max index
+loop2:
+	orr	r11, r10, r4, lsl r5		@ factor way and cache number into r11
+	orr	r11, r11, r9, lsl r2		@ factor index number into r11
+	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
+	subs	r9, r9, #1			@ decrement the index
+	bge	loop2
+	subs	r4, r4, #1			@ decrement the way
+	bge	loop1
+skip:
+	add	r10, r10, #2			@ increment cache number
+	cmp	r3, r10
+	bgt	flush_levels
+finished:
+	mov	r10, #0				@ swith back to cache level 0
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	dsb	st
+	isb
+	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}
+	bx	lr
+ENDPROC(psci_v7_flush_dcache_all)
+
+ENTRY(psci_disable_smp)
+	mrc	p15, 0, r0, c1, c0, 1		@ ACTLR
+	bic	r0, r0, #(1 << 6)		@ Clear SMP bit
+	mcr	p15, 0, r0, c1, c0, 1		@ ACTLR
+	isb
+	dsb
+	bx	lr
+ENDPROC(psci_disable_smp)
+.weak psci_disable_smp
+
+ENTRY(psci_enable_smp)
+	mrc	p15, 0, r0, c1, c0, 1		@ ACTLR
+	orr	r0, r0, #(1 << 6)		@ Set SMP bit
+	mcr	p15, 0, r0, c1, c0, 1		@ ACTLR
+	isb
+	bx	lr
+ENDPROC(psci_enable_smp)
+.weak psci_enable_smp
+
+ENTRY(psci_cpu_off_common)
+	push	{lr}
+
+	bl	psci_v7_flush_dcache_all
+
+	clrex					@ Why???
+
+	mrc	p15, 0, r0, c1, c0, 0		@ SCTLR
+	bic	r0, r0, #(1 << 2)		@ Clear C bit
+	mcr	p15, 0, r0, c1, c0, 0		@ SCTLR
+	isb
+	dsb
+
+	bl	psci_v7_flush_dcache_all
+
+	clrex					@ Why???
+
+	bl	psci_disable_smp
+
+	pop	{lr}
+	bx	lr
+ENDPROC(psci_cpu_off_common)
+
+@ The stacks are allocated in reverse order, i.e.
+@ the stack for CPU0 has the highest memory address.
+@
+@ --------------------  __secure_stack_end
+@ |  CPU0 target PC  |
+@ |------------------|
+@ |                  |
+@ |    CPU0 stack    |
+@ |                  |
+@ |------------------|  __secure_stack_end - 1KB
+@ |        .         |
+@ |        .         |
+@ |        .         |
+@ |        .         |
+@ --------------------  __secure_stack_start
+@
+@ This expects CPU ID in r0 and returns stack top in r0
+LENTRY(psci_get_cpu_stack_top)
+	@ stack top = __secure_stack_end - (cpuid << ARM_PSCI_STACK_SHIFT)
+	ldr	r3, =__secure_stack_end
+	sub	r0, r3, r0, LSL #ARM_PSCI_STACK_SHIFT
+	sub	r0, r0, #4		@ Save space for target PC
+	bx	lr
+ENDPROC(psci_get_cpu_stack_top)
+
+@ {r0, r1, r2, ip} from _do_nonsec_entry(kernel_entry, 0, machid, r2) in
+@ arch/arm/lib/bootm.c:boot_jump_linux() must remain unchanged across
+@ this function.
+ENTRY(psci_stack_setup)
+	mov	r6, lr
+	mov	r7, r0
+	bl	psci_get_cpu_id		@ CPU ID => r0
+	bl	psci_get_cpu_stack_top	@ stack top => r0
+	mov	sp, r0
+	mov	r0, r7
+	bx	r6
+ENDPROC(psci_stack_setup)
+
+ENTRY(psci_arch_init)
+	mov	pc, lr
+ENDPROC(psci_arch_init)
+.weak psci_arch_init
+
+ENTRY(psci_arch_cpu_entry)
+	mov	pc, lr
+ENDPROC(psci_arch_cpu_entry)
+.weak psci_arch_cpu_entry
+
+ENTRY(psci_cpu_entry)
+	bl	psci_enable_smp
+
+	bl	_nonsec_init
+
+	bl	psci_stack_setup
+
+	bl	psci_arch_cpu_entry
+
+	bl	psci_get_cpu_id			@ CPU ID => r0
+	mov	r2, r0				@ CPU ID => r2
+	bl	psci_get_context_id		@ context id => r0
+	mov	r1, r0				@ context id => r1
+	mov	r0, r2				@ CPU ID => r0
+	bl	psci_get_target_pc		@ target PC => r0
+	b	_do_nonsec_entry
+ENDPROC(psci_cpu_entry)
+
+	.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv7/s5p-common/Makefile b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/Makefile
new file mode 100644
index 000000000..bfe02389c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2009 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+
+ifdef CONFIG_ARCH_NEXELL
+obj-$(CONFIG_PWM_NX) += pwm.o
+obj-$(CONFIG_S5P4418_ONEWIRE) += pwm.o
+else
+obj-y += cpu_info.o
+ifndef CONFIG_SPL_BUILD
+obj-y += timer.o
+obj-y += sromc.o
+obj-$(CONFIG_PWM) += pwm.o
+endif
+endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/s5p-common/cpu_info.c b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/cpu_info.c
new file mode 100644
index 000000000..d910282e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/cpu_info.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+#include <common.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Default is s5pc100 */
+unsigned int s5p_cpu_id = 0xC100;
+/* Default is EVT1 */
+unsigned int s5p_cpu_rev = 1;
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+	s5p_set_cpu_id();
+
+	return 0;
+}
+#endif
+
+u32 get_device_type(void)
+{
+	return s5p_cpu_id;
+}
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+	const char *cpu_model;
+	int len;
+
+	/* For SoC with no real CPU ID in naming convention. */
+	cpu_model = fdt_getprop(gd->fdt_blob, 0, "cpu-model", &len);
+	if (cpu_model)
+		printf("CPU:   %.*s @ ", len, cpu_model);
+	else
+		printf("CPU:   %s%X @ ", s5p_get_cpu_name(), s5p_cpu_id);
+
+	print_freq(get_arm_clk(), "\n");
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/s5p-common/pwm.c b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/pwm.c
new file mode 100644
index 000000000..aef2e5574
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/pwm.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <pwm.h>
+#include <asm/io.h>
+#include <asm/arch/pwm.h>
+#include <asm/arch/clk.h>
+
+int pwm_enable(int pwm_id)
+{
+	const struct s5p_timer *pwm =
+#if defined(CONFIG_ARCH_NEXELL)
+			(struct s5p_timer *)PHY_BASEADDR_PWM;
+#else
+			(struct s5p_timer *)samsung_get_base_timer();
+#endif
+	unsigned long tcon;
+
+	tcon = readl(&pwm->tcon);
+	tcon |= TCON_START(pwm_id);
+
+	writel(tcon, &pwm->tcon);
+
+	return 0;
+}
+
+void pwm_disable(int pwm_id)
+{
+	const struct s5p_timer *pwm =
+#if defined(CONFIG_ARCH_NEXELL)
+			(struct s5p_timer *)PHY_BASEADDR_PWM;
+#else
+			(struct s5p_timer *)samsung_get_base_timer();
+#endif
+	unsigned long tcon;
+
+	tcon = readl(&pwm->tcon);
+	tcon &= ~TCON_START(pwm_id);
+
+	writel(tcon, &pwm->tcon);
+}
+
+static unsigned long pwm_calc_tin(int pwm_id, unsigned long freq)
+{
+	unsigned long tin_parent_rate;
+	unsigned int div;
+
+#if defined(CONFIG_ARCH_NEXELL)
+	unsigned int pre_div;
+	const struct s5p_timer *pwm =
+		(struct s5p_timer *)PHY_BASEADDR_PWM;
+	unsigned int val;
+	struct clk *clk = clk_get(CORECLK_NAME_PCLK);
+
+	tin_parent_rate = clk_get_rate(clk);
+#else
+	tin_parent_rate = get_pwm_clk();
+#endif
+
+#if defined(CONFIG_ARCH_NEXELL)
+	writel(0, &pwm->tcfg0);
+	val = readl(&pwm->tcfg0);
+
+	if (pwm_id < 2)
+		div = ((val >> 0) & 0xff) + 1;
+	else
+		div = ((val >> 8) & 0xff) + 1;
+
+	writel(0, &pwm->tcfg1);
+	val = readl(&pwm->tcfg1);
+	val = (val >> MUX_DIV_SHIFT(pwm_id)) & 0xF;
+	pre_div = (1UL << val);
+
+	freq = tin_parent_rate / div / pre_div;
+
+	return freq;
+#else
+	for (div = 2; div <= 16; div *= 2) {
+		if ((tin_parent_rate / (div << 16)) < freq)
+			return tin_parent_rate / div;
+	}
+
+	return tin_parent_rate / 16;
+#endif
+}
+
+#define NS_IN_SEC 1000000000UL
+
+int pwm_config(int pwm_id, int duty_ns, int period_ns)
+{
+	const struct s5p_timer *pwm =
+#if defined(CONFIG_ARCH_NEXELL)
+			(struct s5p_timer *)PHY_BASEADDR_PWM;
+#else
+			(struct s5p_timer *)samsung_get_base_timer();
+#endif
+	unsigned int offset;
+	unsigned long tin_rate;
+	unsigned long tin_ns;
+	unsigned long frequency;
+	unsigned long tcon;
+	unsigned long tcnt;
+	unsigned long tcmp;
+
+	/*
+	 * We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1GHz is easily representable
+	 * by 32bits.
+	 */
+	if (period_ns > NS_IN_SEC || duty_ns > NS_IN_SEC || period_ns == 0)
+		return -ERANGE;
+
+	if (duty_ns > period_ns)
+		return -EINVAL;
+
+	frequency = NS_IN_SEC / period_ns;
+
+	/* Check to see if we are changing the clock rate of the PWM */
+	tin_rate = pwm_calc_tin(pwm_id, frequency);
+
+	tin_ns = NS_IN_SEC / tin_rate;
+
+	if (IS_ENABLED(CONFIG_ARCH_NEXELL))
+		/* The counter starts at zero. */
+		tcnt = (period_ns / tin_ns) - 1;
+	else
+		tcnt = period_ns / tin_ns;
+
+	/* Note, counters count down */
+	tcmp = duty_ns / tin_ns;
+	tcmp = tcnt - tcmp;
+
+	/* Update the PWM register block. */
+	offset = pwm_id * 3;
+	if (pwm_id < 4) {
+		writel(tcnt, &pwm->tcntb0 + offset);
+		writel(tcmp, &pwm->tcmpb0 + offset);
+	}
+
+	tcon = readl(&pwm->tcon);
+	tcon |= TCON_UPDATE(pwm_id);
+	if (pwm_id < 4)
+		tcon |= TCON_AUTO_RELOAD(pwm_id);
+	else
+		tcon |= TCON4_AUTO_RELOAD;
+	writel(tcon, &pwm->tcon);
+
+	tcon &= ~TCON_UPDATE(pwm_id);
+	writel(tcon, &pwm->tcon);
+
+	return 0;
+}
+
+int pwm_init(int pwm_id, int div, int invert)
+{
+	u32 val;
+	const struct s5p_timer *pwm =
+#if defined(CONFIG_ARCH_NEXELL)
+			(struct s5p_timer *)PHY_BASEADDR_PWM;
+#else
+			(struct s5p_timer *)samsung_get_base_timer();
+#endif
+	unsigned long ticks_per_period;
+	unsigned int offset, prescaler;
+
+	/*
+	 * Timer Freq(HZ) =
+	 *	PWM_CLK / { (prescaler_value + 1) * (divider_value) }
+	 */
+
+	val = readl(&pwm->tcfg0);
+	if (pwm_id < 2) {
+		prescaler = PRESCALER_0;
+		val &= ~0xff;
+		val |= (prescaler & 0xff);
+	} else {
+		prescaler = PRESCALER_1;
+		val &= ~(0xff << 8);
+		val |= (prescaler & 0xff) << 8;
+	}
+	writel(val, &pwm->tcfg0);
+	val = readl(&pwm->tcfg1);
+	val &= ~(0xf << MUX_DIV_SHIFT(pwm_id));
+	val |= (div & 0xf) << MUX_DIV_SHIFT(pwm_id);
+	writel(val, &pwm->tcfg1);
+
+	if (pwm_id == 4) {
+		/*
+		 * TODO(sjg): Use this as a countdown timer for now. We count
+		 * down from the maximum value to 0, then reset.
+		 */
+		ticks_per_period = -1UL;
+	} else {
+		const unsigned long pwm_hz = 1000;
+#if defined(CONFIG_ARCH_NEXELL)
+		struct clk *clk = clk_get(CORECLK_NAME_PCLK);
+		unsigned long timer_rate_hz = clk_get_rate(clk) /
+#else
+		unsigned long timer_rate_hz = get_pwm_clk() /
+#endif
+			((prescaler + 1) * (1 << div));
+
+		ticks_per_period = timer_rate_hz / pwm_hz;
+	}
+
+	/* set count value */
+	offset = pwm_id * 3;
+
+	writel(ticks_per_period, &pwm->tcntb0 + offset);
+
+	val = readl(&pwm->tcon) & ~(0xf << TCON_OFFSET(pwm_id));
+	if (invert && (pwm_id < 4))
+		val |= TCON_INVERTER(pwm_id);
+	writel(val, &pwm->tcon);
+
+	pwm_enable(pwm_id);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/s5p-common/sromc.c b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/sromc.c
new file mode 100644
index 000000000..0fc170936
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/sromc.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sromc.h>
+
+/*
+ * s5p_config_sromc() - select the proper SROMC Bank and configure the
+ * band width control and bank control registers
+ * srom_bank	- SROM
+ * srom_bw_conf  - SMC Band witdh reg configuration value
+ * srom_bc_conf  - SMC Bank Control reg configuration value
+ */
+void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf)
+{
+	u32 tmp;
+	struct s5p_sromc *srom =
+		(struct s5p_sromc *)samsung_get_base_sromc();
+
+	/* Configure SMC_BW register to handle proper SROMC bank */
+	tmp = srom->bw;
+	tmp &= ~(0xF << (srom_bank * 4));
+	tmp |= srom_bw_conf;
+	srom->bw = tmp;
+
+	/* Configure SMC_BC register */
+	srom->bc[srom_bank] = srom_bc_conf;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/s5p-common/timer.c b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/timer.c
new file mode 100644
index 000000000..8141f40d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/s5p-common/timer.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Inki Dae <inki.dae@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/pwm.h>
+#include <asm/arch/clk.h>
+#include <linux/delay.h>
+
+/* Use the old PWM interface for now */
+#undef CONFIG_DM_PWM
+#include <pwm.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned long get_current_tick(void);
+static void reset_timer_masked(void);
+
+/* macro to read the 16 bit timer */
+static inline struct s5p_timer *s5p_get_base_timer(void)
+{
+	return (struct s5p_timer *)samsung_get_base_timer();
+}
+
+/**
+ * Read the countdown timer.
+ *
+ * This operates at 1MHz and counts downwards. It will wrap about every
+ * hour (2^32 microseconds).
+ *
+ * @return current value of timer
+ */
+static unsigned long timer_get_us_down(void)
+{
+	struct s5p_timer *const timer = s5p_get_base_timer();
+
+	return readl(&timer->tcnto4);
+}
+
+int timer_init(void)
+{
+	/* PWM Timer 4 */
+	pwm_init(4, MUX_DIV_4, 0);
+	pwm_config(4, 100000, 100000);
+	pwm_enable(4);
+
+	/* Use this as the current monotonic time in us */
+	gd->arch.timer_reset_value = 0;
+
+	/* Use this as the last timer value we saw */
+	gd->arch.lastinc = timer_get_us_down();
+	reset_timer_masked();
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+unsigned long get_timer(unsigned long base)
+{
+	unsigned long long time_ms;
+
+	ulong now = timer_get_us_down();
+
+	/*
+	 * Increment the time by the amount elapsed since the last read.
+	 * The timer may have wrapped around, but it makes no difference to
+	 * our arithmetic here.
+	 */
+	gd->arch.timer_reset_value += gd->arch.lastinc - now;
+	gd->arch.lastinc = now;
+
+	/* Divide by 1000 to convert from us to ms */
+	time_ms = gd->arch.timer_reset_value;
+	do_div(time_ms, 1000);
+	return time_ms - base;
+}
+
+unsigned long __attribute__((no_instrument_function)) timer_get_us(void)
+{
+	static unsigned long base_time_us;
+
+	struct s5p_timer *const timer =
+		(struct s5p_timer *)samsung_get_base_timer();
+	unsigned long now_downward_us = readl(&timer->tcnto4);
+
+	if (!base_time_us)
+		base_time_us = now_downward_us;
+
+	/* Note that this timer counts downward. */
+	return base_time_us - now_downward_us;
+}
+
+/* delay x useconds */
+void __udelay(unsigned long usec)
+{
+	unsigned long count_value;
+
+	count_value = timer_get_us_down();
+	while ((int)(count_value - timer_get_us_down()) < (int)usec)
+		;
+}
+
+static void reset_timer_masked(void)
+{
+	struct s5p_timer *const timer = s5p_get_base_timer();
+
+	/* reset time */
+	gd->arch.lastinc = readl(&timer->tcnto4);
+	gd->arch.tbl = 0;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+unsigned long get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/s5p4418/Makefile b/roms/u-boot/arch/arm/cpu/armv7/s5p4418/Makefile
new file mode 100644
index 000000000..321b257b6
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/s5p4418/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 Nexell
+# Hyunseok, Jung <hsjung@nexell.co.kr>
+
+obj-y += cpu.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7/s5p4418/cpu.c b/roms/u-boot/arch/arm/cpu/armv7/s5p4418/cpu.c
new file mode 100644
index 000000000..3baa761ec
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/s5p4418/cpu.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung@nexell.co.kr>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/reset.h>
+#include <asm/arch/tieoff.h>
+#include <cpu_func.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef	CONFIG_ARCH_CPU_INIT
+#error must be define the macro "CONFIG_ARCH_CPU_INIT"
+#endif
+
+void s_init(void)
+{
+}
+
+static void cpu_soc_init(void)
+{
+	/*
+	 * NOTE> ALIVE Power Gate must enable for Alive register access.
+	 *	     must be clear wfi jump address
+	 */
+	writel(1, ALIVEPWRGATEREG);
+	writel(0xFFFFFFFF, SCR_ARM_SECOND_BOOT);
+
+	/* write 0xf0 on alive scratchpad reg for boot success check */
+	writel(readl(SCR_SIGNAGURE_READ) | 0xF0, (SCR_SIGNAGURE_SET));
+
+	/* set l2 cache tieoff */
+	nx_tieoff_set(NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_0, 1);
+	nx_tieoff_set(NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_1, 1);
+}
+
+#ifdef CONFIG_PL011_SERIAL
+static void serial_device_init(void)
+{
+	char dev[10];
+	int id;
+
+	sprintf(dev, "nx-uart.%d", CONFIG_CONS_INDEX);
+	id = RESET_ID_UART0 + CONFIG_CONS_INDEX;
+
+	struct clk *clk = clk_get((const char *)dev);
+
+	/* reset control: Low active ___|---   */
+	nx_rstcon_setrst(id, RSTCON_ASSERT);
+	udelay(10);
+	nx_rstcon_setrst(id, RSTCON_NEGATE);
+	udelay(10);
+
+	/* set clock   */
+	clk_disable(clk);
+	clk_set_rate(clk, CONFIG_PL011_CLOCK);
+	clk_enable(clk);
+}
+#endif
+
+int arch_cpu_init(void)
+{
+	flush_dcache_all();
+	cpu_soc_init();
+	clk_init();
+
+	if (IS_ENABLED(CONFIG_PL011_SERIAL))
+		serial_device_init();
+
+	return 0;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	return 0;
+}
+#endif
+
+void reset_cpu(void)
+{
+	void *clkpwr_reg = (void *)PHY_BASEADDR_CLKPWR;
+	const u32 sw_rst_enb_bitpos = 3;
+	const u32 sw_rst_enb_mask = 1 << sw_rst_enb_bitpos;
+	const u32 sw_rst_bitpos = 12;
+	const u32 sw_rst_mask = 1 << sw_rst_bitpos;
+	int pwrcont = 0x224;
+	int pwrmode = 0x228;
+	u32 read_value;
+
+	read_value = readl((void *)(clkpwr_reg + pwrcont));
+
+	read_value &= ~sw_rst_enb_mask;
+	read_value |= 1 << sw_rst_enb_bitpos;
+
+	writel(read_value, (void *)(clkpwr_reg + pwrcont));
+	writel(sw_rst_mask, (void *)(clkpwr_reg + pwrmode));
+}
+
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+	return 0;
+}
+#endif	/* CONFIG_ARCH_MISC_INIT */
diff --git a/roms/u-boot/arch/arm/cpu/armv7/sctlr.S b/roms/u-boot/arch/arm/cpu/armv7/sctlr.S
new file mode 100644
index 000000000..bd56e41af
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/sctlr.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ *  Routines to access the system control register
+ *
+ *  Copyright (c) 2018 Heinrich Schuchardt
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * void allow_unaligned(void) - allow unaligned access
+ *
+ * This routine clears the aligned flag in the system control register.
+ * After calling this routine unaligned access does no longer lead to a
+ * data abort but is handled by the CPU.
+ */
+ENTRY(allow_unaligned)
+	mrc	p15, 0, r0, c1, c0, 0	@ load system control register
+	bic	r0, r0, #2		@ clear aligned flag
+	mcr	p15, 0, r0, c1, c0, 0	@ write system control register
+	bx	lr			@ return
+ENDPROC(allow_unaligned)
diff --git a/roms/u-boot/arch/arm/cpu/armv7/smccc-call.S b/roms/u-boot/arch/arm/cpu/armv7/smccc-call.S
new file mode 100644
index 000000000..f70728f2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/smccc-call.S
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015, Linaro Limited
+ */
+#include <linux/linkage.h>
+
+#include <asm/opcodes-sec.h>
+#include <asm/opcodes-virt.h>
+
+#ifdef CONFIG_EFI_LOADER
+	.section	.text.efi_runtime
+#endif
+
+#define UNWIND(x...)
+	/*
+	 * Wrap c macros in asm macros to delay expansion until after the
+	 * SMCCC asm macro is expanded.
+	 */
+	.macro SMCCC_SMC
+	__SMC(0)
+	.endm
+
+	.macro SMCCC_HVC
+	__HVC(0)
+	.endm
+
+	.macro SMCCC instr
+UNWIND(	.fnstart)
+	mov	r12, sp
+	push	{r4-r7}
+UNWIND(	.save	{r4-r7})
+	ldm	r12, {r4-r7}
+	\instr
+	pop	{r4-r7}
+	ldr	r12, [sp, #(4 * 4)]
+	stm	r12, {r0-r3}
+	bx	lr
+UNWIND(	.fnend)
+	.endm
+
+/*
+ * void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
+ */
+ENTRY(__arm_smccc_smc)
+	SMCCC SMCCC_SMC
+ENDPROC(__arm_smccc_smc)
+
+/*
+ * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
+ */
+ENTRY(__arm_smccc_hvc)
+	SMCCC SMCCC_HVC
+ENDPROC(__arm_smccc_hvc)
diff --git a/roms/u-boot/arch/arm/cpu/armv7/start.S b/roms/u-boot/arch/arm/cpu/armv7/start.S
new file mode 100644
index 000000000..dcb4195d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/start.S
@@ -0,0 +1,342 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * armboot - Startup Code for OMAP3530/ARM Cortex CPU-core
+ *
+ * Copyright (c) 2004	Texas Instruments <r-woodruff2@ti.com>
+ *
+ * Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ * Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ * Copyright (c) 2006-2008 Syed Mohammed Khasim <x0khasim@ti.com>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/system.h>
+#include <linux/linkage.h>
+#include <asm/armv7.h>
+
+/*************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * Do important init only if we don't start from memory!
+ * Setup memory and board specific bits prior to relocation.
+ * Relocate armboot to ram. Setup stack.
+ *
+ *************************************************************************/
+
+	.globl	reset
+	.globl	save_boot_params_ret
+	.type   save_boot_params_ret,%function
+#ifdef CONFIG_ARMV7_LPAE
+	.global	switch_to_hypervisor_ret
+#endif
+
+reset:
+	/* Allow the board to save important registers */
+	b	save_boot_params
+save_boot_params_ret:
+#ifdef CONFIG_ARMV7_LPAE
+/*
+ * check for Hypervisor support
+ */
+	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
+	and	r0, r0, #CPUID_ARM_VIRT_MASK	@ mask virtualization bits
+	cmp	r0, #(1 << CPUID_ARM_VIRT_SHIFT)
+	beq	switch_to_hypervisor
+switch_to_hypervisor_ret:
+#endif
+	/*
+	 * disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode,
+	 * except if in HYP mode already
+	 */
+	mrs	r0, cpsr
+	and	r1, r0, #0x1f		@ mask mode bits
+	teq	r1, #0x1a		@ test for HYP mode
+	bicne	r0, r0, #0x1f		@ clear all mode bits
+	orrne	r0, r0, #0x13		@ set SVC mode
+	orr	r0, r0, #0xc0		@ disable FIQ and IRQ
+	msr	cpsr,r0
+
+/*
+ * Setup vector:
+ * (OMAP4 spl TEXT_BASE is not 32 byte aligned.
+ * Continue to use ROM code vector only in OMAP4 spl)
+ */
+#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
+	/* Set V=0 in CP15 SCTLR register - for VBAR to point to vector */
+	mrc	p15, 0, r0, c1, c0, 0	@ Read CP15 SCTLR Register
+	bic	r0, #CR_V		@ V = 0
+	mcr	p15, 0, r0, c1, c0, 0	@ Write CP15 SCTLR Register
+
+#ifdef CONFIG_HAS_VBAR
+	/* Set vector address in CP15 VBAR register */
+	ldr	r0, =_start
+	mcr	p15, 0, r0, c12, c0, 0	@Set VBAR
+#endif
+#endif
+
+	/* the mask ROM code should have PLL and others stable */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#ifdef CONFIG_CPU_V7A
+	bl	cpu_init_cp15
+#endif
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+	bl	cpu_init_crit
+#endif
+#endif
+
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+ENTRY(c_runtime_cpu_setup)
+/*
+ * If I-cache is enabled invalidate it
+ */
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate icache
+	mcr     p15, 0, r0, c7, c10, 4	@ DSB
+	mcr     p15, 0, r0, c7, c5, 4	@ ISB
+#endif
+
+	bx	lr
+
+ENDPROC(c_runtime_cpu_setup)
+
+/*************************************************************************
+ *
+ * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
+ *	__attribute__((weak));
+ *
+ * Stack pointer is not yet initialized at this moment
+ * Don't save anything to stack even if compiled with -O0
+ *
+ *************************************************************************/
+ENTRY(save_boot_params)
+	b	save_boot_params_ret		@ back to my caller
+ENDPROC(save_boot_params)
+	.weak	save_boot_params
+
+#ifdef CONFIG_ARMV7_LPAE
+ENTRY(switch_to_hypervisor)
+	b	switch_to_hypervisor_ret
+ENDPROC(switch_to_hypervisor)
+	.weak	switch_to_hypervisor
+#endif
+
+/*************************************************************************
+ *
+ * cpu_init_cp15
+ *
+ * Setup CP15 registers (cache, MMU, TLBs). The I-cache is turned on unless
+ * CONFIG_SYS_ICACHE_OFF is defined.
+ *
+ *************************************************************************/
+ENTRY(cpu_init_cp15)
+	/*
+	 * Invalidate L1 I/D
+	 */
+	mov	r0, #0			@ set up for MCR
+	mcr	p15, 0, r0, c8, c7, 0	@ invalidate TLBs
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate icache
+	mcr	p15, 0, r0, c7, c5, 6	@ invalidate BP array
+	mcr     p15, 0, r0, c7, c10, 4	@ DSB
+	mcr     p15, 0, r0, c7, c5, 4	@ ISB
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002000	@ clear bits 13 (--V-)
+	bic	r0, r0, #0x00000007	@ clear bits 2:0 (-CAM)
+	orr	r0, r0, #0x00000002	@ set bit 1 (--A-) Align
+	orr	r0, r0, #0x00000800	@ set bit 11 (Z---) BTB
+#if CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+	bic	r0, r0, #0x00001000	@ clear bit 12 (I) I-cache
+#else
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-cache
+#endif
+	mcr	p15, 0, r0, c1, c0, 0
+
+#ifdef CONFIG_ARM_ERRATA_716044
+	mrc	p15, 0, r0, c1, c0, 0	@ read system control register
+	orr	r0, r0, #1 << 11	@ set bit #11
+	mcr	p15, 0, r0, c1, c0, 0	@ write system control register
+#endif
+
+#if (defined(CONFIG_ARM_ERRATA_742230) || defined(CONFIG_ARM_ERRATA_794072))
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 4		@ set bit #4
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_743622
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 6		@ set bit #6
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_751472
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 11	@ set bit #11
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_761320
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 21	@ set bit #21
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_845369
+	mrc     p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr     r0, r0, #1 << 22	@ set bit #22
+	mcr     p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
+	mov	r5, lr			@ Store my Caller
+	mrc	p15, 0, r1, c0, c0, 0	@ r1 has Read Main ID Register (MIDR)
+	mov	r3, r1, lsr #20		@ get variant field
+	and	r3, r3, #0xf		@ r3 has CPU variant
+	and	r4, r1, #0xf		@ r4 has CPU revision
+	mov	r2, r3, lsl #4		@ shift variant field for combined value
+	orr	r2, r4, r2		@ r2 has combined CPU variant + revision
+
+/* Early stack for ERRATA that needs into call C code */
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+	ldr	r0, =(CONFIG_SPL_STACK)
+#else
+	ldr	r0, =(CONFIG_SYS_INIT_SP_ADDR)
+#endif
+	bic	r0, r0, #7	/* 8-byte alignment for ABI compliance */
+	mov	sp, r0
+
+#ifdef CONFIG_ARM_ERRATA_798870
+	cmp	r2, #0x30		@ Applies to lower than R3p0
+	bge	skip_errata_798870      @ skip if not affected rev
+	cmp	r2, #0x20		@ Applies to including and above R2p0
+	blt	skip_errata_798870      @ skip if not affected rev
+
+	mrc	p15, 1, r0, c15, c0, 0  @ read l2 aux ctrl reg
+	orr	r0, r0, #1 << 7         @ Enable hazard-detect timeout
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_l2aux_ctrl
+	isb				@ Recommended ISB after l2actlr update
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+skip_errata_798870:
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_801819
+	cmp	r2, #0x24		@ Applies to lt including R2p4
+	bgt	skip_errata_801819      @ skip if not affected rev
+	cmp	r2, #0x20		@ Applies to including and above R2p0
+	blt	skip_errata_801819      @ skip if not affected rev
+	mrc	p15, 0, r0, c0, c0, 6	@ pick up REVIDR reg
+	and	r0, r0, #1 << 3		@ check REVIDR[3]
+	cmp	r0, #1 << 3
+	beq	skip_errata_801819	@ skip erratum if REVIDR[3] is set
+
+	mrc	p15, 0, r0, c1, c0, 1	@ read auxilary control register
+	orr	r0, r0, #3 << 27	@ Disables streaming. All write-allocate
+					@ lines allocate in the L1 or L2 cache.
+	orr	r0, r0, #3 << 25	@ Disables streaming. All write-allocate
+					@ lines allocate in the L1 cache.
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_acr
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+skip_errata_801819:
+#endif
+
+#ifdef CONFIG_ARM_CORTEX_A15_CVE_2017_5715
+	mrc	p15, 0, r0, c1, c0, 1	@ read auxilary control register
+	orr	r0, r0, #1 << 0		@ Enable invalidates of BTB
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_acr
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_454179
+	mrc	p15, 0, r0, c1, c0, 1	@ Read ACR
+
+	cmp	r2, #0x21		@ Only on < r2p1
+	orrlt	r0, r0, #(0x3 << 6)	@ Set DBSM(BIT7) and IBE(BIT6) bits
+
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_acr
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+#endif
+
+#if defined(CONFIG_ARM_ERRATA_430973) || defined (CONFIG_ARM_CORTEX_A8_CVE_2017_5715)
+	mrc	p15, 0, r0, c1, c0, 1	@ Read ACR
+
+#ifdef CONFIG_ARM_CORTEX_A8_CVE_2017_5715
+	orr	r0, r0, #(0x1 << 6)	@ Set IBE bit always to enable OS WA
+#else
+	cmp	r2, #0x21		@ Only on < r2p1
+	orrlt	r0, r0, #(0x1 << 6)	@ Set IBE bit
+#endif
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_acr
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_621766
+	mrc	p15, 0, r0, c1, c0, 1	@ Read ACR
+
+	cmp	r2, #0x21		@ Only on < r2p1
+	orrlt	r0, r0, #(0x1 << 5)	@ Set L1NEON bit
+
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_acr
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_725233
+	mrc	p15, 1, r0, c9, c0, 2	@ Read L2ACR
+
+	cmp	r2, #0x21		@ Only on < r2p1 (Cortex A8)
+	orrlt	r0, r0, #(0x1 << 27)	@ L2 PLD data forwarding disable
+
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_l2aux_ctrl
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_852421
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 24	@ set bit #24
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_852423
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 12	@ set bit #12
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
+	mov	pc, r5			@ back to my caller
+ENDPROC(cpu_init_cp15)
+
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
+	!defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+/*************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************/
+ENTRY(cpu_init_crit)
+	/*
+	 * Jump to board specific initialization...
+	 * The Mask ROM will have already initialized
+	 * basic memory. Go here to bump up clock rate and handle
+	 * wake up conditions.
+	 */
+	b	lowlevel_init		@ go setup pll,mux,memory
+ENDPROC(cpu_init_crit)
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/stv0991/Makefile b/roms/u-boot/arch/arm/cpu/armv7/stv0991/Makefile
new file mode 100644
index 000000000..3be5eba4b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/stv0991/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+# Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+
+obj-y	:= timer.o clock.o pinmux.o reset.o
+obj-y	+= lowlevel.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7/stv0991/clock.c b/roms/u-boot/arch/arm/cpu/armv7/stv0991/clock.c
new file mode 100644
index 000000000..1e35deed3
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/stv0991/clock.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/stv0991_cgu.h>
+#include<asm/arch/stv0991_periph.h>
+
+static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
+				(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
+
+void enable_pll1(void)
+{
+	/* pll1 already configured for 1000Mhz, just need to enable it */
+	writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01),
+			&stv0991_cgu_regs->pll1_ctrl);
+}
+
+void clock_setup(int peripheral)
+{
+	switch (peripheral) {
+	case UART_CLOCK_CFG:
+		writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq);
+		break;
+	case ETH_CLOCK_CFG:
+		enable_pll1();
+		writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq);
+
+		/* Clock selection for ethernet tx_clk & rx_clk*/
+		writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK)
+				| ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl);
+		break;
+	case QSPI_CLOCK_CFG:
+		writel(QSPI_CLK_CTRL, &stv0991_cgu_regs->qspi_freq);
+		break;
+	default:
+		break;
+	}
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S b/roms/u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S
new file mode 100644
index 000000000..218ac70f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 stmicroelectronics
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	mov	pc, lr
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c b/roms/u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c
new file mode 100644
index 000000000..6c44ffe50
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#include <asm/io.h>
+#include <asm/arch/stv0991_creg.h>
+#include <asm/arch/stv0991_periph.h>
+#include <asm/arch/hardware.h>
+
+static struct stv0991_creg *const stv0991_creg = \
+			(struct stv0991_creg *)CREG_BASE_ADDR;
+
+int stv0991_pinmux_config(int peripheral)
+{
+	switch (peripheral) {
+	case UART_GPIOC_30_31:
+		/* SSDA/SSCL pad muxing to UART Rx/Dx */
+		writel((readl(&stv0991_creg->mux12) & GPIOC_31_MUX_MASK) |
+				CFG_GPIOC_31_UART_RX,
+				&stv0991_creg->mux12);
+		writel((readl(&stv0991_creg->mux12) & GPIOC_30_MUX_MASK) |
+				CFG_GPIOC_30_UART_TX,
+				&stv0991_creg->mux12);
+		/* SSDA/SSCL pad config to push pull*/
+		writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_31_MODE_MASK) |
+				CFG_GPIOC_31_MODE_PP,
+				&stv0991_creg->cfg_pad6);
+		writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_30_MODE_MASK) |
+				CFG_GPIOC_30_MODE_HIGH,
+				&stv0991_creg->cfg_pad6);
+		break;
+	case UART_GPIOB_16_17:
+		/* ethernet rx_6/7 to UART Rx/Dx */
+		writel((readl(&stv0991_creg->mux7) & GPIOB_17_MUX_MASK) |
+				CFG_GPIOB_17_UART_RX,
+				&stv0991_creg->mux7);
+		writel((readl(&stv0991_creg->mux7) & GPIOB_16_MUX_MASK) |
+				CFG_GPIOB_16_UART_TX,
+				&stv0991_creg->mux7);
+		break;
+	case ETH_GPIOB_10_31_C_0_4:
+		writel(readl(&stv0991_creg->mux6) & 0x000000FF,
+				&stv0991_creg->mux6);
+		writel(0x00000000, &stv0991_creg->mux7);
+		writel(0x00000000, &stv0991_creg->mux8);
+		writel(readl(&stv0991_creg->mux9) & 0xFFF00000,
+				&stv0991_creg->mux9);
+		/* Ethernet Voltage configuration to 1.8V*/
+		writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
+				ETH_VDD_CFG, &stv0991_creg->vdd_pad1);
+		writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
+				ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1);
+
+		break;
+	case QSPI_CS_CLK_PAD:
+		writel((readl(&stv0991_creg->mux13) & FLASH_CS_NC_MASK) |
+				CFG_FLASH_CS_NC, &stv0991_creg->mux13);
+		writel((readl(&stv0991_creg->mux13) & FLASH_CLK_MASK) |
+				CFG_FLASH_CLK, &stv0991_creg->mux13);
+	default:
+		break;
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/stv0991/reset.c b/roms/u-boot/arch/arm/cpu/armv7/stv0991/reset.c
new file mode 100644
index 000000000..77d4477c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/stv0991/reset.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/stv0991_wdru.h>
+#include <linux/delay.h>
+void reset_cpu(void)
+{
+	puts("System is going to reboot ...\n");
+	/*
+	 * This 1 second delay will allow the above message
+	 * to be printed before reset
+	 */
+	udelay((1000 * 1000));
+
+	/* Setting bit 1 of the WDRU unit will reset the SoC */
+	writel(WDRU_RST_SYS, &stv0991_wd_ru_ptr->wdru_ctrl1);
+
+	/* system will restart */
+	while (1)
+		;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/stv0991/timer.c b/roms/u-boot/arch/arm/cpu/armv7/stv0991/timer.c
new file mode 100644
index 000000000..07033acb5
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/stv0991/timer.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-stv0991/hardware.h>
+#include <asm/arch-stv0991/stv0991_cgu.h>
+#include <asm/arch-stv0991/stv0991_gpt.h>
+#include <linux/delay.h>
+
+static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
+				(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
+
+#define READ_TIMER()	(readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
+#define GPT_RESOLUTION	(CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
+
+static ulong get_timer_masked(void);
+
+int timer_init(void)
+{
+	/* Timer1 clock configuration */
+	writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq);
+	writel(readl(&stv0991_cgu_regs->cgu_enable_2) |
+			TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2);
+
+	/* Stop the timer */
+	writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
+	writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc);
+	/* Configure timer for auto-reload */
+	writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
+			&gpt1_regs_ptr->cr1);
+
+	/* load value for free running */
+	writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
+
+	/* start timer */
+	writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN,
+			&gpt1_regs_ptr->cr1);
+
+	/* Reset the timer */
+	lastdec = READ_TIMER();
+	timestamp = 0;
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer(ulong base)
+{
+	return (get_timer_masked() / GPT_RESOLUTION) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_timer_masked();
+	ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100);
+	ulong rndoff;
+
+	rndoff = (usec % 10) ? 1 : 0;
+
+	/* tenudelcnt timer tick gives 10 microsecconds delay */
+	tmo = ((usec / 10) + rndoff) * tenudelcnt;
+
+	while ((ulong) (get_timer_masked() - start) < tmo)
+		;
+}
+
+static ulong get_timer_masked(void)
+{
+	ulong now = READ_TIMER();
+
+	if (now >= lastdec) {
+		/* normal mode */
+		timestamp += now - lastdec;
+	} else {
+		/* we have an overflow ... */
+		timestamp += now + GPT_FREE_RUNNING - lastdec;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_STV0991_HZ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/sunxi/Makefile b/roms/u-boot/arch/arm/cpu/armv7/sunxi/Makefile
new file mode 100644
index 000000000..1d40d6a18
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/sunxi/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other Makefile
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+obj-y	+= timer.o
+
+obj-$(CONFIG_MACH_SUN6I)	+= tzpc.o
+obj-$(CONFIG_MACH_SUN8I_H3)	+= tzpc.o
+
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_ARMV7_PSCI)	+= psci.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+obj-y	+= fel_utils.o
+endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/sunxi/fel_utils.S b/roms/u-boot/arch/arm/cpu/armv7/sunxi/fel_utils.S
new file mode 100644
index 000000000..b2310751d
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/sunxi/fel_utils.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Utility functions for FEL mode.
+ *
+ * Copyright (c) 2015 Google, Inc
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/system.h>
+#include <linux/linkage.h>
+
+ENTRY(save_boot_params)
+	ldr	r0, =fel_stash
+	str	sp, [r0, #0]
+	str	lr, [r0, #4]
+	mrs	lr, cpsr		@ Read CPSR
+	str	lr, [r0, #8]
+	mrc	p15, 0, lr, c1, c0, 0	@ Read CP15 SCTLR Register
+	str	lr, [r0, #12]
+	mrc	p15, 0, lr, c12, c0, 0	@ Read VBAR
+	str	lr, [r0, #16]
+	mrc	p15, 0, lr, c1, c0, 0	@ Read CP15 Control Register
+	str	lr, [r0, #20]
+	b	save_boot_params_ret
+ENDPROC(save_boot_params)
+
+ENTRY(return_to_fel)
+	mov	sp, r0
+	mov	lr, r1
+	ldr	r0, =fel_stash
+	ldr	r1, [r0, #20]
+	mcr	p15, 0, r1, c1, c0, 0	@ Write CP15 Control Register
+	ldr	r1, [r0, #16]
+	mcr	p15, 0, r1, c12, c0, 0	@ Write VBAR
+	ldr	r1, [r0, #12]
+	mcr	p15, 0, r1, c1, c0, 0	@ Write CP15 SCTLR Register
+	ldr	r1, [r0, #8]
+	msr	cpsr, r1		@ Write CPSR
+	bx	lr
+ENDPROC(return_to_fel)
diff --git a/roms/u-boot/arch/arm/cpu/armv7/sunxi/psci.c b/roms/u-boot/arch/arm/cpu/armv7/sunxi/psci.c
new file mode 100644
index 000000000..1ac50f558
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/sunxi/psci.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on assembly code by Marc Zyngier <marc.zyngier@arm.com>,
+ * which was based on code by Carl van Schaik <carl@ok-labs.com>.
+ */
+#include <config.h>
+#include <common.h>
+#include <asm/cache.h>
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/cpucfg.h>
+#include <asm/arch/prcm.h>
+#include <asm/armv7.h>
+#include <asm/gic.h>
+#include <asm/io.h>
+#include <asm/psci.h>
+#include <asm/secure.h>
+#include <asm/system.h>
+
+#include <linux/bitops.h>
+
+#define __irq		__attribute__ ((interrupt ("IRQ")))
+
+#define	GICD_BASE	(SUNXI_GIC400_BASE + GIC_DIST_OFFSET)
+#define	GICC_BASE	(SUNXI_GIC400_BASE + GIC_CPU_OFFSET_A15)
+
+/*
+ * R40 is different from other single cluster SoCs.
+ *
+ * The power clamps are located in the unused space after the per-core
+ * reset controls for core 3. The secondary core entry address register
+ * is in the SRAM controller address range.
+ */
+#define SUN8I_R40_PWROFF			(0x110)
+#define SUN8I_R40_PWR_CLAMP(cpu)		(0x120 + (cpu) * 0x4)
+#define SUN8I_R40_SRAMC_SOFT_ENTRY_REG0		(0xbc)
+
+static void __secure cp15_write_cntp_tval(u32 tval)
+{
+	asm volatile ("mcr p15, 0, %0, c14, c2, 0" : : "r" (tval));
+}
+
+static void __secure cp15_write_cntp_ctl(u32 val)
+{
+	asm volatile ("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
+}
+
+static u32 __secure cp15_read_cntp_ctl(void)
+{
+	u32 val;
+
+	asm volatile ("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
+
+	return val;
+}
+
+#define ONE_MS (COUNTER_FREQUENCY / 1000)
+
+static void __secure __mdelay(u32 ms)
+{
+	u32 reg = ONE_MS * ms;
+
+	cp15_write_cntp_tval(reg);
+	isb();
+	cp15_write_cntp_ctl(3);
+
+	do {
+		isb();
+		reg = cp15_read_cntp_ctl();
+	} while (!(reg & BIT(2)));
+
+	cp15_write_cntp_ctl(0);
+	isb();
+}
+
+static void __secure clamp_release(u32 __maybe_unused *clamp)
+{
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
+	defined(CONFIG_MACH_SUN8I_H3) || \
+	defined(CONFIG_MACH_SUN8I_R40)
+	u32 tmp = 0x1ff;
+	do {
+		tmp >>= 1;
+		writel(tmp, clamp);
+	} while (tmp);
+
+	__mdelay(10);
+#endif
+}
+
+static void __secure clamp_set(u32 __maybe_unused *clamp)
+{
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
+	defined(CONFIG_MACH_SUN8I_H3) || \
+	defined(CONFIG_MACH_SUN8I_R40)
+	writel(0xff, clamp);
+#endif
+}
+
+static void __secure sunxi_power_switch(u32 *clamp, u32 *pwroff, bool on,
+					int cpu)
+{
+	if (on) {
+		/* Release power clamp */
+		clamp_release(clamp);
+
+		/* Clear power gating */
+		clrbits_le32(pwroff, BIT(cpu));
+	} else {
+		/* Set power gating */
+		setbits_le32(pwroff, BIT(cpu));
+
+		/* Activate power clamp */
+		clamp_set(clamp);
+	}
+}
+
+#ifdef CONFIG_MACH_SUN8I_R40
+/* secondary core entry address is programmed differently on R40 */
+static void __secure sunxi_set_entry_address(void *entry)
+{
+	writel((u32)entry,
+	       SUNXI_SRAMC_BASE + SUN8I_R40_SRAMC_SOFT_ENTRY_REG0);
+}
+#else
+static void __secure sunxi_set_entry_address(void *entry)
+{
+	struct sunxi_cpucfg_reg *cpucfg =
+		(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+
+	writel((u32)entry, &cpucfg->priv0);
+}
+#endif
+
+#ifdef CONFIG_MACH_SUN7I
+/* sun7i (A20) is different from other single cluster SoCs */
+static void __secure sunxi_cpu_set_power(int __always_unused cpu, bool on)
+{
+	struct sunxi_cpucfg_reg *cpucfg =
+		(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+
+	sunxi_power_switch(&cpucfg->cpu1_pwr_clamp, &cpucfg->cpu1_pwroff,
+			   on, 0);
+}
+#elif defined CONFIG_MACH_SUN8I_R40
+static void __secure sunxi_cpu_set_power(int cpu, bool on)
+{
+	struct sunxi_cpucfg_reg *cpucfg =
+		(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+
+	sunxi_power_switch((void *)cpucfg + SUN8I_R40_PWR_CLAMP(cpu),
+			   (void *)cpucfg + SUN8I_R40_PWROFF,
+			   on, 0);
+}
+#else /* ! CONFIG_MACH_SUN7I && ! CONFIG_MACH_SUN8I_R40 */
+static void __secure sunxi_cpu_set_power(int cpu, bool on)
+{
+	struct sunxi_prcm_reg *prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+	sunxi_power_switch(&prcm->cpu_pwr_clamp[cpu], &prcm->cpu_pwroff,
+			   on, cpu);
+}
+#endif /* CONFIG_MACH_SUN7I */
+
+void __secure sunxi_cpu_power_off(u32 cpuid)
+{
+	struct sunxi_cpucfg_reg *cpucfg =
+		(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+	u32 cpu = cpuid & 0x3;
+
+	/* Wait for the core to enter WFI */
+	while (1) {
+		if (readl(&cpucfg->cpu[cpu].status) & BIT(2))
+			break;
+		__mdelay(1);
+	}
+
+	/* Assert reset on target CPU */
+	writel(0, &cpucfg->cpu[cpu].rst);
+
+	/* Lock CPU (Disable external debug access) */
+	clrbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+
+	/* Power down CPU */
+	sunxi_cpu_set_power(cpuid, false);
+
+	/* Unlock CPU (Disable external debug access) */
+	setbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+}
+
+static u32 __secure cp15_read_scr(void)
+{
+	u32 scr;
+
+	asm volatile ("mrc p15, 0, %0, c1, c1, 0" : "=r" (scr));
+
+	return scr;
+}
+
+static void __secure cp15_write_scr(u32 scr)
+{
+	asm volatile ("mcr p15, 0, %0, c1, c1, 0" : : "r" (scr));
+	isb();
+}
+
+/*
+ * Although this is an FIQ handler, the FIQ is processed in monitor mode,
+ * which means there's no FIQ banked registers. This is the same as IRQ
+ * mode, so use the IRQ attribute to ask the compiler to handler entry
+ * and return.
+ */
+void __secure __irq psci_fiq_enter(void)
+{
+	u32 scr, reg, cpu;
+
+	/* Switch to secure mode */
+	scr = cp15_read_scr();
+	cp15_write_scr(scr & ~BIT(0));
+
+	/* Validate reason based on IAR and acknowledge */
+	reg = readl(GICC_BASE + GICC_IAR);
+
+	/* Skip spurious interrupts 1022 and 1023 */
+	if (reg == 1023 || reg == 1022)
+		goto out;
+
+	/* End of interrupt */
+	writel(reg, GICC_BASE + GICC_EOIR);
+	dsb();
+
+	/* Get CPU number */
+	cpu = (reg >> 10) & 0x7;
+
+	/* Power off the CPU */
+	sunxi_cpu_power_off(cpu);
+
+out:
+	/* Restore security level */
+	cp15_write_scr(scr);
+}
+
+int __secure psci_cpu_on(u32 __always_unused unused, u32 mpidr, u32 pc,
+			 u32 context_id)
+{
+	struct sunxi_cpucfg_reg *cpucfg =
+		(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+	u32 cpu = (mpidr & 0x3);
+
+	/* store target PC and context id */
+	psci_save(cpu, pc, context_id);
+
+	/* Set secondary core power on PC */
+	sunxi_set_entry_address(&psci_cpu_entry);
+
+	/* Assert reset on target CPU */
+	writel(0, &cpucfg->cpu[cpu].rst);
+
+	/* Invalidate L1 cache */
+	clrbits_le32(&cpucfg->gen_ctrl, BIT(cpu));
+
+	/* Lock CPU (Disable external debug access) */
+	clrbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+
+	/* Power up target CPU */
+	sunxi_cpu_set_power(cpu, true);
+
+	/* De-assert reset on target CPU */
+	writel(BIT(1) | BIT(0), &cpucfg->cpu[cpu].rst);
+
+	/* Unlock CPU (Disable external debug access) */
+	setbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+
+	return ARM_PSCI_RET_SUCCESS;
+}
+
+s32 __secure psci_cpu_off(void)
+{
+	psci_cpu_off_common();
+
+	/* Ask CPU0 via SGI15 to pull the rug... */
+	writel(BIT(16) | 15, GICD_BASE + GICD_SGIR);
+	dsb();
+
+	/* Wait to be turned off */
+	while (1)
+		wfi();
+}
+
+void __secure psci_arch_init(void)
+{
+	u32 reg;
+
+	/* SGI15 as Group-0 */
+	clrbits_le32(GICD_BASE + GICD_IGROUPRn, BIT(15));
+
+	/* Set SGI15 priority to 0 */
+	writeb(0, GICD_BASE + GICD_IPRIORITYRn + 15);
+
+	/* Be cool with non-secure */
+	writel(0xff, GICC_BASE + GICC_PMR);
+
+	/* Switch FIQEn on */
+	setbits_le32(GICC_BASE + GICC_CTLR, BIT(3));
+
+	reg = cp15_read_scr();
+	reg |= BIT(2);  /* Enable FIQ in monitor mode */
+	reg &= ~BIT(0); /* Secure mode */
+	cp15_write_scr(reg);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/sunxi/start.c b/roms/u-boot/arch/arm/cpu/armv7/sunxi/start.c
new file mode 100644
index 000000000..6b392fa83
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/sunxi/start.c
@@ -0,0 +1 @@
+/* Intentionally empty. Only needed to get FEL SPL link line right */
diff --git a/roms/u-boot/arch/arm/cpu/armv7/sunxi/timer.c b/roms/u-boot/arch/arm/cpu/armv7/sunxi/timer.c
new file mode 100644
index 000000000..b75859963
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/sunxi/timer.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TIMER_MODE   (0x0 << 7)	/* continuous mode */
+#define TIMER_DIV    (0x0 << 4)	/* pre scale 1 */
+#define TIMER_SRC    (0x1 << 2)	/* osc24m */
+#define TIMER_RELOAD (0x1 << 1)	/* reload internal value */
+#define TIMER_EN     (0x1 << 0)	/* enable timer */
+
+#define TIMER_CLOCK		(24 * 1000 * 1000)
+#define COUNT_TO_USEC(x)	((x) / 24)
+#define USEC_TO_COUNT(x)	((x) * 24)
+#define TICKS_PER_HZ		(TIMER_CLOCK / CONFIG_SYS_HZ)
+#define TICKS_TO_HZ(x)		((x) / TICKS_PER_HZ)
+
+#define TIMER_LOAD_VAL		0xffffffff
+
+#define TIMER_NUM		0	/* we use timer 0 */
+
+/* read the 32-bit timer */
+static ulong read_timer(void)
+{
+	struct sunxi_timer_reg *timers =
+		(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+	struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
+
+	/*
+	 * The hardware timer counts down, therefore we invert to
+	 * produce an incrementing timer.
+	 */
+	return ~readl(&timer->val);
+}
+
+/* init timer register */
+int timer_init(void)
+{
+	struct sunxi_timer_reg *timers =
+		(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+	struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
+	writel(TIMER_LOAD_VAL, &timer->inter);
+	writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN,
+	       &timer->ctl);
+
+	return 0;
+}
+
+/* timer without interrupts */
+static ulong get_timer_masked(void)
+{
+	/* current tick value */
+	ulong now = TICKS_TO_HZ(read_timer());
+
+	if (now >= gd->arch.lastinc)	/* normal (non rollover) */
+		gd->arch.tbl += (now - gd->arch.lastinc);
+	else {
+		/* rollover */
+		gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL)
+				- gd->arch.lastinc) + now;
+	}
+	gd->arch.lastinc = now;
+
+	return gd->arch.tbl;
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+/* delay x useconds */
+void __udelay(unsigned long usec)
+{
+	long tmo = USEC_TO_COUNT(usec);
+	ulong now, last = read_timer();
+
+	while (tmo > 0) {
+		now = read_timer();
+		if (now > last)	/* normal (non rollover) */
+			tmo -= now - last;
+		else		/* rollover */
+			tmo -= TIMER_LOAD_VAL - last + now;
+		last = now;
+	}
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/sunxi/tzpc.c b/roms/u-boot/arch/arm/cpu/armv7/sunxi/tzpc.c
new file mode 100644
index 000000000..0c86a21a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/sunxi/tzpc.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/tzpc.h>
+
+/* Configure Trust Zone Protection Controller */
+void tzpc_init(void)
+{
+	struct sunxi_tzpc *tzpc = (struct sunxi_tzpc *)SUNXI_TZPC_BASE;
+
+#ifdef CONFIG_MACH_SUN6I
+	/* Enable non-secure access to the RTC */
+	writel(SUN6I_TZPC_DECPORT0_RTC, &tzpc->decport0_set);
+#endif
+
+#ifdef CONFIG_MACH_SUN8I_H3
+	/* Enable non-secure access to all peripherals */
+	writel(SUN8I_H3_TZPC_DECPORT0_ALL, &tzpc->decport0_set);
+	writel(SUN8I_H3_TZPC_DECPORT1_ALL, &tzpc->decport1_set);
+	writel(SUN8I_H3_TZPC_DECPORT2_ALL, &tzpc->decport2_set);
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds b/roms/u-boot/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
new file mode 100644
index 000000000..942c29fc9
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Based on omap-common/u-boot-spl.lds:
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ */
+MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\
+		LENGTH = IMAGE_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+		__start = .;
+		*(.vectors)
+		arch/arm/cpu/armv7/start.o	(.text)
+		*(.text*)
+	} > .sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	} > .sram
+
+	. = ALIGN(4);
+	__image_copy_end = .;
+	_end = .;
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} > .sdram
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/syslib.c b/roms/u-boot/arch/arm/cpu/armv7/syslib.c
new file mode 100644
index 000000000..7e2963697
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/syslib.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+/************************************************************
+ * sdelay() - simple spin loop.  Will be constant time as
+ *  its generally used in bypass conditions only.  This
+ *  is necessary until timers are accessible.
+ *
+ *  not inline to increase chances its in cache when called
+ *************************************************************/
+void sdelay(unsigned long loops)
+{
+	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+			  "bne 1b":"=r" (loops):"0"(loops));
+}
+
+/*********************************************************************
+ * wait_on_value() - common routine to allow waiting for changes in
+ *   volatile regs.
+ *********************************************************************/
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr,
+		  u32 bound)
+{
+	u32 i = 0, val;
+	do {
+		++i;
+		val = readl((u32)read_addr) & read_bit_mask;
+		if (val == match_value)
+			return 1;
+		if (i == bound)
+			return 0;
+	} while (1);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/vf610/Kconfig b/roms/u-boot/arch/arm/cpu/armv7/vf610/Kconfig
new file mode 100644
index 000000000..5d485a3ce
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/vf610/Kconfig
@@ -0,0 +1,37 @@
+if ARCH_VF610
+
+config VF610
+	bool
+	default y
+
+choice
+	prompt "Vybrid board select"
+
+config TARGET_VF610TWR
+	bool "TWR-VF65GS10-DS5"
+
+config TARGET_COLIBRI_VF
+	bool "Colibri VF50/61"
+	select BOARD_LATE_INIT
+
+config TARGET_PCM052
+	bool "PCM-052"
+	select SYS_FSL_ERRATUM_ESDHC135
+	select SYS_FSL_ERRATUM_ESDHC_A001
+
+config TARGET_BK4R1
+	bool "BK4r1"
+	select SYS_FSL_ERRATUM_ESDHC135
+	select SYS_FSL_ERRATUM_ESDHC_A001
+	select BOARD_LATE_INIT
+
+endchoice
+
+config SYS_SOC
+	default "vf610"
+
+source "board/freescale/vf610twr/Kconfig"
+source "board/phytec/pcm052/Kconfig"
+source "board/toradex/colibri_vf/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/vf610/Makefile b/roms/u-boot/arch/arm/cpu/armv7/vf610/Makefile
new file mode 100644
index 000000000..b5b479b49
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/vf610/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+
+obj-y	+= generic.o
+obj-y	+= timer.o
+
+MKIMAGEFLAGS_u-boot.vyb = -T vybridimage
+
+u-boot.vyb: u-boot.imx
+	$(call if_changed,mkimage)
diff --git a/roms/u-boot/arch/arm/cpu/armv7/vf610/generic.c b/roms/u-boot/arch/arm/cpu/armv7/vf610/generic.c
new file mode 100644
index 000000000..c23ddc12b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/vf610/generic.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <net.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/mach-imx/sys_proto.h>
+#include <env.h>
+#include <netdev.h>
+#ifdef CONFIG_FSL_ESDHC_IMX
+#include <fsl_esdhc_imx.h>
+#endif
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+static char soc_type[] = "xx0";
+
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 reg;
+
+	reg = readl(&ccm->ccgr6);
+	if (enable)
+		reg |= CCM_CCGR6_OCOTP_CTRL_MASK;
+	else
+		reg &= ~CCM_CCGR6_OCOTP_CTRL_MASK;
+	writel(reg, &ccm->ccgr6);
+}
+#endif
+
+static u32 get_mcu_main_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_ccsr, ccm_cacrr, armclk_div;
+	u32 sysclk_sel, pll_pfd_sel = 0;
+	u32 freq = 0;
+
+	ccm_ccsr = readl(&ccm->ccsr);
+	sysclk_sel = ccm_ccsr & CCM_CCSR_SYS_CLK_SEL_MASK;
+	sysclk_sel >>= CCM_CCSR_SYS_CLK_SEL_OFFSET;
+
+	ccm_cacrr = readl(&ccm->cacrr);
+	armclk_div = ccm_cacrr & CCM_CACRR_ARM_CLK_DIV_MASK;
+	armclk_div >>= CCM_CACRR_ARM_CLK_DIV_OFFSET;
+	armclk_div += 1;
+
+	switch (sysclk_sel) {
+	case 0:
+		freq = FASE_CLK_FREQ;
+		break;
+	case 1:
+		freq = SLOW_CLK_FREQ;
+		break;
+	case 2:
+		pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL2_PFD_CLK_SEL_MASK;
+		pll_pfd_sel >>= CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET;
+		if (pll_pfd_sel == 0)
+			freq = PLL2_MAIN_FREQ;
+		else if (pll_pfd_sel == 1)
+			freq = PLL2_PFD1_FREQ;
+		else if (pll_pfd_sel == 2)
+			freq = PLL2_PFD2_FREQ;
+		else if (pll_pfd_sel == 3)
+			freq = PLL2_PFD3_FREQ;
+		else if (pll_pfd_sel == 4)
+			freq = PLL2_PFD4_FREQ;
+		break;
+	case 3:
+		freq = PLL2_MAIN_FREQ;
+		break;
+	case 4:
+		pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL1_PFD_CLK_SEL_MASK;
+		pll_pfd_sel >>= CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET;
+		if (pll_pfd_sel == 0)
+			freq = PLL1_MAIN_FREQ;
+		else if (pll_pfd_sel == 1)
+			freq = PLL1_PFD1_FREQ;
+		else if (pll_pfd_sel == 2)
+			freq = PLL1_PFD2_FREQ;
+		else if (pll_pfd_sel == 3)
+			freq = PLL1_PFD3_FREQ;
+		else if (pll_pfd_sel == 4)
+			freq = PLL1_PFD4_FREQ;
+		break;
+	case 5:
+		freq = PLL3_MAIN_FREQ;
+		break;
+	default:
+		printf("unsupported system clock select\n");
+	}
+
+	return freq / armclk_div;
+}
+
+static u32 get_bus_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_cacrr, busclk_div;
+
+	ccm_cacrr = readl(&ccm->cacrr);
+
+	busclk_div = ccm_cacrr & CCM_CACRR_BUS_CLK_DIV_MASK;
+	busclk_div >>= CCM_CACRR_BUS_CLK_DIV_OFFSET;
+	busclk_div += 1;
+
+	return get_mcu_main_clk() / busclk_div;
+}
+
+static u32 get_ipg_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_cacrr, ipgclk_div;
+
+	ccm_cacrr = readl(&ccm->cacrr);
+
+	ipgclk_div = ccm_cacrr & CCM_CACRR_IPG_CLK_DIV_MASK;
+	ipgclk_div >>= CCM_CACRR_IPG_CLK_DIV_OFFSET;
+	ipgclk_div += 1;
+
+	return get_bus_clk() / ipgclk_div;
+}
+
+static u32 get_uart_clk(void)
+{
+	return get_ipg_clk();
+}
+
+static u32 get_sdhc_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_cscmr1, ccm_cscdr2, sdhc_clk_sel, sdhc_clk_div;
+	u32 freq = 0;
+
+	ccm_cscmr1 = readl(&ccm->cscmr1);
+	sdhc_clk_sel = ccm_cscmr1 & CCM_CSCMR1_ESDHC1_CLK_SEL_MASK;
+	sdhc_clk_sel >>= CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET;
+
+	ccm_cscdr2 = readl(&ccm->cscdr2);
+	sdhc_clk_div = ccm_cscdr2 & CCM_CSCDR2_ESDHC1_CLK_DIV_MASK;
+	sdhc_clk_div >>= CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET;
+	sdhc_clk_div += 1;
+
+	switch (sdhc_clk_sel) {
+	case 0:
+		freq = PLL3_MAIN_FREQ;
+		break;
+	case 1:
+		freq = PLL3_PFD3_FREQ;
+		break;
+	case 2:
+		freq = PLL1_PFD3_FREQ;
+		break;
+	case 3:
+		freq = get_bus_clk();
+		break;
+	}
+
+	return freq / sdhc_clk_div;
+}
+
+u32 get_fec_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_cscmr2, rmii_clk_sel;
+	u32 freq = 0;
+
+	ccm_cscmr2 = readl(&ccm->cscmr2);
+	rmii_clk_sel = ccm_cscmr2 & CCM_CSCMR2_RMII_CLK_SEL_MASK;
+	rmii_clk_sel >>= CCM_CSCMR2_RMII_CLK_SEL_OFFSET;
+
+	switch (rmii_clk_sel) {
+	case 0:
+		freq = ENET_EXTERNAL_CLK;
+		break;
+	case 1:
+		freq = AUDIO_EXTERNAL_CLK;
+		break;
+	case 2:
+		freq = PLL5_MAIN_FREQ;
+		break;
+	case 3:
+		freq = PLL5_MAIN_FREQ / 2;
+		break;
+	}
+
+	return freq;
+}
+
+static u32 get_i2c_clk(void)
+{
+	return get_ipg_clk();
+}
+
+static u32 get_dspi_clk(void)
+{
+	return get_ipg_clk();
+}
+
+u32 get_lpuart_clk(void)
+{
+	return get_uart_clk();
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return get_mcu_main_clk();
+	case MXC_BUS_CLK:
+		return get_bus_clk();
+	case MXC_IPG_CLK:
+		return get_ipg_clk();
+	case MXC_UART_CLK:
+		return get_uart_clk();
+	case MXC_ESDHC_CLK:
+		return get_sdhc_clk();
+	case MXC_FEC_CLK:
+		return get_fec_clk();
+	case MXC_I2C_CLK:
+		return get_i2c_clk();
+	case MXC_DSPI_CLK:
+		return get_dspi_clk();
+	default:
+		break;
+	}
+	return -1;
+}
+
+/* Dump some core clocks */
+int do_vf610_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+			char *const argv[])
+{
+	printf("\n");
+	printf("cpu clock : %8d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("bus clock : %8d MHz\n", mxc_get_clock(MXC_BUS_CLK) / 1000000);
+	printf("ipg clock : %8d MHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000000);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks, CONFIG_SYS_MAXARGS, 1, do_vf610_showclocks,
+	"display clocks",
+	""
+);
+
+#ifdef CONFIG_FEC_MXC
+__weak void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[4];
+	struct fuse_bank4_regs *fuse =
+		(struct fuse_bank4_regs *)bank->fuse_regs;
+
+	u32 value = readl(&fuse->mac_addr0);
+	mac[0] = (value >> 8);
+	mac[1] = value;
+
+	value = readl(&fuse->mac_addr1);
+	mac[2] = value >> 24;
+	mac[3] = value >> 16;
+	mac[4] = value >> 8;
+	mac[5] = value;
+}
+#endif
+
+u32 get_cpu_rev(void)
+{
+	return MXC_CPU_VF610 << 12;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+static char *get_reset_cause(void)
+{
+	u32 cause;
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+
+	cause = readl(&src_regs->srsr);
+	writel(cause, &src_regs->srsr);
+
+	if (cause & SRC_SRSR_POR_RST)
+		return "POWER ON RESET";
+	else if (cause & SRC_SRSR_WDOG_A5)
+		return "WDOG A5";
+	else if (cause & SRC_SRSR_WDOG_M4)
+		return "WDOG M4";
+	else if (cause & SRC_SRSR_JTAG_RST)
+		return "JTAG HIGH-Z";
+	else if (cause & SRC_SRSR_SW_RST)
+		return "SW RESET";
+	else if (cause & SRC_SRSR_RESETB)
+		return "EXTERNAL RESET";
+	else
+		return "unknown reset";
+}
+
+int print_cpuinfo(void)
+{
+	printf("CPU: Freescale Vybrid VF%s at %d MHz\n",
+	       soc_type, mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("Reset cause: %s\n", get_reset_cause());
+
+	return 0;
+}
+#endif
+
+int arch_cpu_init(void)
+{
+	struct mscm *mscm = (struct mscm *)MSCM_BASE_ADDR;
+
+	soc_type[0] = mscm->cpxcount ? '6' : '5'; /*Dual Core => VF6x0 */
+	soc_type[1] = mscm->cpxcfg1 ? '1' : '0'; /* L2 Cache => VFx10 */
+
+	return 0;
+}
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+	char soc[6];
+
+	strcpy(soc, "vf");
+	strcat(soc, soc_type);
+	env_set("soc", soc);
+
+	return 0;
+}
+#endif
+
+int cpu_eth_init(struct bd_info *bis)
+{
+	int rc = -ENODEV;
+
+#if defined(CONFIG_FEC_MXC)
+	rc = fecmxc_initialize(bis);
+#endif
+
+	return rc;
+}
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+int cpu_mmc_init(struct bd_info *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC_IMX
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#endif
+	return 0;
+}
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+	enum dcache_option option = DCACHE_WRITETHROUGH;
+#else
+	enum dcache_option option = DCACHE_WRITEBACK;
+#endif
+	dcache_enable();
+	icache_enable();
+
+    /* Enable caching on OCRAM */
+	mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR, IRAM_SIZE, option);
+}
+#endif
+
+#ifdef CONFIG_SYS_I2C_MXC
+/* i2c_num can be from 0 - 3 */
+int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+
+	switch (i2c_num) {
+	case 0:
+		clrsetbits_le32(&ccm->ccgr4, CCM_CCGR4_I2C0_CTRL_MASK,
+				CCM_CCGR4_I2C0_CTRL_MASK);
+	case 2:
+		clrsetbits_le32(&ccm->ccgr10, CCM_CCGR10_I2C2_CTRL_MASK,
+				CCM_CCGR10_I2C2_CTRL_MASK);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv7/vf610/timer.c b/roms/u-boot/arch/arm/cpu/armv7/vf610/timer.c
new file mode 100644
index 000000000..a9c1a8fce
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/vf610/timer.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <linux/delay.h>
+
+static struct pit_reg *cur_pit = (struct pit_reg *)PIT_BASE_ADDR;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TIMER_LOAD_VAL	0xffffffff
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, mxc_get_clock(MXC_IPG_CLK));
+
+	return tick;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long usec)
+{
+	usec = usec * mxc_get_clock(MXC_IPG_CLK)  + 999999;
+	do_div(usec, 1000000);
+
+	return usec;
+}
+
+int timer_init(void)
+{
+	__raw_writel(0, &cur_pit->mcr);
+
+	__raw_writel(TIMER_LOAD_VAL, &cur_pit->ldval1);
+	__raw_writel(0, &cur_pit->tctrl1);
+	__raw_writel(1, &cur_pit->tctrl1);
+
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+
+	return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+	ulong now = TIMER_LOAD_VAL - __raw_readl(&cur_pit->cval1);
+
+	/* increment tbu if tbl has rolled over */
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
+
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+ulong get_timer(ulong base)
+{
+	return tick_to_time(get_ticks()) - base;
+}
+
+/* delay x useconds AND preserve advance timstamp value */
+void __udelay(unsigned long usec)
+{
+	unsigned long long start;
+	ulong tmo;
+
+	start = get_ticks();			/* get current timestamp */
+	tmo = us_to_tick(usec);			/* convert usecs to ticks */
+	while ((get_ticks() - start) < tmo)
+		;				/* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return mxc_get_clock(MXC_IPG_CLK);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/virt-dt.c b/roms/u-boot/arch/arm/cpu/armv7/virt-dt.c
new file mode 100644
index 000000000..c0422485b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/virt-dt.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <log.h>
+#include <stdio_dev.h>
+#include <linux/ctype.h>
+#include <linux/types.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#include <asm/armv7.h>
+#include <asm/psci.h>
+
+int armv7_apply_memory_carveout(u64 *start, u64 *size)
+{
+#ifdef CONFIG_ARMV7_SECURE_RESERVE_SIZE
+	if (*start + *size < CONFIG_ARMV7_SECURE_BASE ||
+	    *start >= (u64)CONFIG_ARMV7_SECURE_BASE +
+		      CONFIG_ARMV7_SECURE_RESERVE_SIZE)
+		return 0;
+
+	/* carveout must be at the beginning or the end of the bank */
+	if (*start == CONFIG_ARMV7_SECURE_BASE ||
+	    *start + *size == (u64)CONFIG_ARMV7_SECURE_BASE +
+			      CONFIG_ARMV7_SECURE_RESERVE_SIZE) {
+		if (*size < CONFIG_ARMV7_SECURE_RESERVE_SIZE) {
+			debug("Secure monitor larger than RAM bank!?\n");
+			return -EINVAL;
+		}
+		*size -= CONFIG_ARMV7_SECURE_RESERVE_SIZE;
+		if (*start == CONFIG_ARMV7_SECURE_BASE)
+			*start += CONFIG_ARMV7_SECURE_RESERVE_SIZE;
+		return 0;
+	}
+	debug("Secure monitor not located at beginning or end of RAM bank\n");
+	return -EINVAL;
+#else /* !CONFIG_ARMV7_SECURE_RESERVE_SIZE */
+	return 0;
+#endif
+}
+
+int psci_update_dt(void *fdt)
+{
+#ifdef CONFIG_ARMV7_NONSEC
+	if (!armv7_boot_nonsec())
+		return 0;
+#endif
+#ifndef CONFIG_ARMV7_SECURE_BASE
+	/* secure code lives in RAM, keep it alive */
+	fdt_add_mem_rsv(fdt, (unsigned long)__secure_start,
+			__secure_end - __secure_start);
+#endif
+
+	return fdt_psci(fdt);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7/virt-v7.c b/roms/u-boot/arch/arm/cpu/armv7/virt-v7.c
new file mode 100644
index 000000000..5ffeca13d
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7/virt-v7.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013
+ * Andre Przywara, Linaro <andre.przywara@linaro.org>
+ *
+ * Routines to transition ARMv7 processors from secure into non-secure state
+ * and from non-secure SVC into HYP mode
+ * needed to enable ARMv7 virtualization for current hypervisors
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/armv7.h>
+#include <asm/cache.h>
+#include <asm/gic.h>
+#include <asm/io.h>
+#include <asm/secure.h>
+
+static unsigned int read_id_pfr1(void)
+{
+	unsigned int reg;
+
+	asm("mrc p15, 0, %0, c0, c1, 1\n" : "=r"(reg));
+	return reg;
+}
+
+static unsigned long get_gicd_base_address(void)
+{
+#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
+	return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
+#else
+	unsigned periphbase;
+
+	/* get the GIC base address from the CBAR register */
+	asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
+
+	/* the PERIPHBASE can be mapped above 4 GB (lower 8 bits used to
+	 * encode this). Bail out here since we cannot access this without
+	 * enabling paging.
+	 */
+	if ((periphbase & 0xff) != 0) {
+		printf("nonsec: PERIPHBASE is above 4 GB, no access.\n");
+		return -1;
+	}
+
+	return (periphbase & CBAR_MASK) + GIC_DIST_OFFSET;
+#endif
+}
+
+/* Define a specific version of this function to enable any available
+ * hardware protections for the reserved region */
+void __weak protect_secure_section(void) {}
+
+static void relocate_secure_section(void)
+{
+#ifdef CONFIG_ARMV7_SECURE_BASE
+	size_t sz = __secure_end - __secure_start;
+	unsigned long szflush = ALIGN(sz + 1, CONFIG_SYS_CACHELINE_SIZE);
+
+	memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz);
+
+	flush_dcache_range(CONFIG_ARMV7_SECURE_BASE,
+			   CONFIG_ARMV7_SECURE_BASE + szflush);
+	protect_secure_section();
+	invalidate_icache_all();
+#endif
+}
+
+static void kick_secondary_cpus_gic(unsigned long gicdaddr)
+{
+	/* kick all CPUs (except this one) by writing to GICD_SGIR */
+	writel(1U << 24, gicdaddr + GICD_SGIR);
+}
+
+void __weak smp_kick_all_cpus(void)
+{
+	unsigned long gic_dist_addr;
+
+	gic_dist_addr = get_gicd_base_address();
+	if (gic_dist_addr == -1)
+		return;
+
+	kick_secondary_cpus_gic(gic_dist_addr);
+}
+
+__weak void psci_board_init(void)
+{
+}
+
+int armv7_init_nonsec(void)
+{
+	unsigned int reg;
+	unsigned itlinesnr, i;
+	unsigned long gic_dist_addr;
+
+	/* check whether the CPU supports the security extensions */
+	reg = read_id_pfr1();
+	if ((reg & 0xF0) == 0) {
+		printf("nonsec: Security extensions not implemented.\n");
+		return -1;
+	}
+
+	/* the SCR register will be set directly in the monitor mode handler,
+	 * according to the spec one should not tinker with it in secure state
+	 * in SVC mode. Do not try to read it once in non-secure state,
+	 * any access to it will trap.
+	 */
+
+	gic_dist_addr = get_gicd_base_address();
+	if (gic_dist_addr == -1)
+		return -1;
+
+	/* enable the GIC distributor */
+	writel(readl(gic_dist_addr + GICD_CTLR) | 0x03,
+	       gic_dist_addr + GICD_CTLR);
+
+	/* TYPER[4:0] contains an encoded number of available interrupts */
+	itlinesnr = readl(gic_dist_addr + GICD_TYPER) & 0x1f;
+
+	/* set all bits in the GIC group registers to one to allow access
+	 * from non-secure state. The first 32 interrupts are private per
+	 * CPU and will be set later when enabling the GIC for each core
+	 */
+	for (i = 1; i <= itlinesnr; i++)
+		writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
+
+	psci_board_init();
+
+	/*
+	 * Relocate secure section before any cpu runs in secure ram.
+	 * smp_kick_all_cpus may enable other cores and runs into secure
+	 * ram, so need to relocate secure section before enabling other
+	 * cores.
+	 */
+	relocate_secure_section();
+
+#ifndef CONFIG_ARMV7_PSCI
+	smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
+	smp_kick_all_cpus();
+#endif
+
+	/* call the non-sec switching code on this CPU also */
+	secure_ram_addr(_nonsec_init)();
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7m/Makefile b/roms/u-boot/arch/arm/cpu/armv7m/Makefile
new file mode 100644
index 000000000..baeac9343
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7m/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y := start.o
+obj-y += cpu.o cache.o
+obj-$(CONFIG_SYS_ARM_MPU) += mpu.o
+obj-$(CONFIG_SYS_ARCH_TIMER) += systick-timer.o
diff --git a/roms/u-boot/arch/arm/cpu/armv7m/cache.c b/roms/u-boot/arch/arm/cpu/armv7m/cache.c
new file mode 100644
index 000000000..d1aecf6a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7m/cache.c
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <errno.h>
+#include <log.h>
+#include <asm/armv7m.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+
+/* Cache maintenance operation registers */
+
+#define V7M_CACHE_REG_ICIALLU		((u32 *)(V7M_CACHE_MAINT_BASE + 0x00))
+#define INVAL_ICACHE_POU		0
+#define V7M_CACHE_REG_ICIMVALU		((u32 *)(V7M_CACHE_MAINT_BASE + 0x08))
+#define V7M_CACHE_REG_DCIMVAC		((u32 *)(V7M_CACHE_MAINT_BASE + 0x0C))
+#define V7M_CACHE_REG_DCISW		((u32 *)(V7M_CACHE_MAINT_BASE + 0x10))
+#define V7M_CACHE_REG_DCCMVAU		((u32 *)(V7M_CACHE_MAINT_BASE + 0x14))
+#define V7M_CACHE_REG_DCCMVAC		((u32 *)(V7M_CACHE_MAINT_BASE + 0x18))
+#define V7M_CACHE_REG_DCCSW		((u32 *)(V7M_CACHE_MAINT_BASE + 0x1C))
+#define V7M_CACHE_REG_DCCIMVAC		((u32 *)(V7M_CACHE_MAINT_BASE + 0x20))
+#define V7M_CACHE_REG_DCCISW		((u32 *)(V7M_CACHE_MAINT_BASE + 0x24))
+#define WAYS_SHIFT			30
+#define SETS_SHIFT			5
+
+/* armv7m processor feature registers */
+
+#define V7M_PROC_REG_CLIDR		((u32 *)(V7M_PROC_FTR_BASE + 0x00))
+#define V7M_PROC_REG_CTR		((u32 *)(V7M_PROC_FTR_BASE + 0x04))
+#define V7M_PROC_REG_CCSIDR		((u32 *)(V7M_PROC_FTR_BASE + 0x08))
+#define MASK_NUM_WAYS			GENMASK(12, 3)
+#define MASK_NUM_SETS			GENMASK(27, 13)
+#define CLINE_SIZE_MASK			GENMASK(2, 0)
+#define NUM_WAYS_SHIFT			3
+#define NUM_SETS_SHIFT			13
+#define V7M_PROC_REG_CSSELR		((u32 *)(V7M_PROC_FTR_BASE + 0x0C))
+#define SEL_I_OR_D			BIT(0)
+
+enum cache_type {
+	DCACHE,
+	ICACHE,
+};
+
+/* PoU : Point of Unification, Poc: Point of Coherency */
+enum cache_action {
+	INVALIDATE_POU,		/* i-cache invalidate by address */
+	INVALIDATE_POC,		/* d-cache invalidate by address */
+	INVALIDATE_SET_WAY,	/* d-cache invalidate by sets/ways */
+	FLUSH_POU,		/* d-cache clean by address to the PoU */
+	FLUSH_POC,		/* d-cache clean by address to the PoC */
+	FLUSH_SET_WAY,		/* d-cache clean by sets/ways */
+	FLUSH_INVAL_POC,	/* d-cache clean & invalidate by addr to PoC */
+	FLUSH_INVAL_SET_WAY,	/* d-cache clean & invalidate by set/ways */
+};
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+struct dcache_config {
+	u32 ways;
+	u32 sets;
+};
+
+static void get_cache_ways_sets(struct dcache_config *cache)
+{
+	u32 cache_size_id = readl(V7M_PROC_REG_CCSIDR);
+
+	cache->ways = (cache_size_id & MASK_NUM_WAYS) >> NUM_WAYS_SHIFT;
+	cache->sets = (cache_size_id & MASK_NUM_SETS) >> NUM_SETS_SHIFT;
+}
+
+/*
+ * Return the io register to perform required cache action like clean or clean
+ * & invalidate by sets/ways.
+ */
+static u32 *get_action_reg_set_ways(enum cache_action action)
+{
+	switch (action) {
+	case INVALIDATE_SET_WAY:
+		return V7M_CACHE_REG_DCISW;
+	case FLUSH_SET_WAY:
+		return V7M_CACHE_REG_DCCSW;
+	case FLUSH_INVAL_SET_WAY:
+		return V7M_CACHE_REG_DCCISW;
+	default:
+		break;
+	};
+
+	return NULL;
+}
+
+/*
+ * Return the io register to perform required cache action like clean or clean
+ * & invalidate by adddress or range.
+ */
+static u32 *get_action_reg_range(enum cache_action action)
+{
+	switch (action) {
+	case INVALIDATE_POU:
+		return V7M_CACHE_REG_ICIMVALU;
+	case INVALIDATE_POC:
+		return V7M_CACHE_REG_DCIMVAC;
+	case FLUSH_POU:
+		return V7M_CACHE_REG_DCCMVAU;
+	case FLUSH_POC:
+		return V7M_CACHE_REG_DCCMVAC;
+	case FLUSH_INVAL_POC:
+		return V7M_CACHE_REG_DCCIMVAC;
+	default:
+		break;
+	}
+
+	return NULL;
+}
+
+static u32 get_cline_size(enum cache_type type)
+{
+	u32 size;
+
+	if (type == DCACHE)
+		clrbits_le32(V7M_PROC_REG_CSSELR, BIT(SEL_I_OR_D));
+	else if (type == ICACHE)
+		setbits_le32(V7M_PROC_REG_CSSELR, BIT(SEL_I_OR_D));
+	/* Make sure cache selection is effective for next memory access */
+	dsb();
+
+	size = readl(V7M_PROC_REG_CCSIDR) & CLINE_SIZE_MASK;
+	/* Size enocoded as 2 less than log(no_of_words_in_cache_line) base 2 */
+	size = 1 << (size + 2);
+	debug("cache line size is %d\n", size);
+
+	return size;
+}
+
+/* Perform the action like invalidate/clean on a range of cache addresses */
+static int action_cache_range(enum cache_action action, u32 start_addr,
+			      int64_t size)
+{
+	u32 cline_size;
+	u32 *action_reg;
+	enum cache_type type;
+
+	action_reg = get_action_reg_range(action);
+	if (!action_reg)
+		return -EINVAL;
+	if (action == INVALIDATE_POU)
+		type = ICACHE;
+	else
+		type = DCACHE;
+
+	/* Cache line size is minium size for the cache action */
+	cline_size = get_cline_size(type);
+	/* Align start address to cache line boundary */
+	start_addr &= ~(cline_size - 1);
+	debug("total size for cache action = %llx\n", size);
+	do {
+		writel(start_addr, action_reg);
+		size -= cline_size;
+		start_addr += cline_size;
+	} while (size > cline_size);
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+	debug("cache action on range done\n");
+
+	return 0;
+}
+
+/* Perform the action like invalidate/clean on all cached addresses */
+static int action_dcache_all(enum cache_action action)
+{
+	struct dcache_config cache;
+	u32 *action_reg;
+	int i, j;
+
+	action_reg = get_action_reg_set_ways(action);
+	if (!action_reg)
+		return -EINVAL;
+
+	clrbits_le32(V7M_PROC_REG_CSSELR, BIT(SEL_I_OR_D));
+	/* Make sure cache selection is effective for next memory access */
+	dsb();
+
+	get_cache_ways_sets(&cache);	/* Get number of ways & sets */
+	debug("cache: ways= %d, sets= %d\n", cache.ways + 1, cache.sets + 1);
+	for (i = cache.sets; i >= 0; i--) {
+		for (j = cache.ways; j >= 0; j--) {
+			writel((j << WAYS_SHIFT) | (i << SETS_SHIFT),
+			       action_reg);
+		}
+	}
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+
+	return 0;
+}
+
+void dcache_enable(void)
+{
+	if (dcache_status())	/* return if cache already enabled */
+		return;
+
+	if (action_dcache_all(INVALIDATE_SET_WAY)) {
+		printf("ERR: D-cache not enabled\n");
+		return;
+	}
+
+	setbits_le32(&V7M_SCB->ccr, BIT(V7M_CCR_DCACHE));
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+void dcache_disable(void)
+{
+	if (!dcache_status())
+		return;
+
+	/* if dcache is enabled-> dcache disable & then flush */
+	if (action_dcache_all(FLUSH_SET_WAY)) {
+		printf("ERR: D-cache not flushed\n");
+		return;
+	}
+
+	clrbits_le32(&V7M_SCB->ccr, BIT(V7M_CCR_DCACHE));
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+int dcache_status(void)
+{
+	return (readl(&V7M_SCB->ccr) & BIT(V7M_CCR_DCACHE)) != 0;
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+	if (action_cache_range(INVALIDATE_POC, start, stop - start)) {
+		printf("ERR: D-cache not invalidated\n");
+		return;
+	}
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	if (action_cache_range(FLUSH_POC, start, stop - start)) {
+		printf("ERR: D-cache not flushed\n");
+		return;
+	}
+}
+void flush_dcache_all(void)
+{
+	if (action_dcache_all(FLUSH_SET_WAY)) {
+		printf("ERR: D-cache not flushed\n");
+		return;
+	}
+}
+
+void invalidate_dcache_all(void)
+{
+	if (action_dcache_all(INVALIDATE_SET_WAY)) {
+		printf("ERR: D-cache not invalidated\n");
+		return;
+	}
+}
+#else
+void dcache_enable(void)
+{
+	return;
+}
+
+void dcache_disable(void)
+{
+	return;
+}
+
+int dcache_status(void)
+{
+	return 0;
+}
+
+void flush_dcache_all(void)
+{
+}
+
+void invalidate_dcache_all(void)
+{
+}
+
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
+				     enum dcache_option option)
+{
+}
+
+#endif
+
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+
+void invalidate_icache_all(void)
+{
+	writel(INVAL_ICACHE_POU, V7M_CACHE_REG_ICIALLU);
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+void icache_enable(void)
+{
+	if (icache_status())
+		return;
+
+	invalidate_icache_all();
+	setbits_le32(&V7M_SCB->ccr, BIT(V7M_CCR_ICACHE));
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+int icache_status(void)
+{
+	return (readl(&V7M_SCB->ccr) & BIT(V7M_CCR_ICACHE)) != 0;
+}
+
+void icache_disable(void)
+{
+	if (!icache_status())
+		return;
+
+	isb();	/* flush pipeline */
+	clrbits_le32(&V7M_SCB->ccr, BIT(V7M_CCR_ICACHE));
+	isb();	/* subsequent instructions fetch see cache disable effect */
+}
+#else
+void invalidate_icache_all(void)
+{
+	return;
+}
+
+void icache_enable(void)
+{
+	return;
+}
+
+void icache_disable(void)
+{
+	return;
+}
+
+int icache_status(void)
+{
+	return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+	icache_enable();
+#endif
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	dcache_enable();
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7m/config.mk b/roms/u-boot/arch/arm/cpu/armv7m/config.mk
new file mode 100644
index 000000000..f50964cfb
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7m/config.mk
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2015
+# Kamil Lulko, <kamil.lulko@gmail.com>
+
+PLATFORM_CPPFLAGS += -mno-unaligned-access
diff --git a/roms/u-boot/arch/arm/cpu/armv7m/cpu.c b/roms/u-boot/arch/arm/cpu/armv7m/cpu.c
new file mode 100644
index 000000000..63721018c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7m/cpu.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010,2011
+ * Vladimir Khusainov, Emcraft Systems, vlad@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+
+/*
+ * This is called right before passing control to
+ * the Linux kernel point.
+ */
+int cleanup_before_linux(void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * disable interrupt and turn off caches etc ...
+	 */
+	disable_interrupts();
+	/*
+	 * turn off D-cache
+	 * dcache_disable() in turn flushes the d-cache
+	 * MPU is still enabled & can't be disabled as the u-boot
+	 * code might be running in sdram which by default is not
+	 * executable area.
+	 */
+	dcache_disable();
+	/* invalidate to make sure no cache line gets dirty between
+	 * dcache flushing and disabling dcache */
+	invalidate_dcache_all();
+
+	icache_disable();
+	invalidate_icache_all();
+
+	return 0;
+}
+
+/*
+ * Perform the low-level reset.
+ */
+void reset_cpu(void)
+{
+	/*
+	 * Perform reset but keep priority group unchanged.
+	 */
+	writel((V7M_AIRCR_VECTKEY << V7M_AIRCR_VECTKEY_SHIFT)
+		| (V7M_SCB->aircr & V7M_AIRCR_PRIGROUP_MSK)
+		| V7M_AIRCR_SYSRESET, &V7M_SCB->aircr);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7m/mpu.c b/roms/u-boot/arch/arm/cpu/armv7m/mpu.c
new file mode 100644
index 000000000..81e7492f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7m/mpu.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#include <linux/bitops.h>
+#include <asm/armv7m.h>
+#include <asm/armv7_mpu.h>
+#include <asm/io.h>
+
+#define V7M_MPU_CTRL_ENABLE		BIT(0)
+#define V7M_MPU_CTRL_DISABLE		(0 << 0)
+#define V7M_MPU_CTRL_HFNMIENA		BIT(1)
+#define V7M_MPU_CTRL_PRIVDEFENA		BIT(2)
+#define VALID_REGION			BIT(4)
+
+void disable_mpu(void)
+{
+	writel(0, &V7M_MPU->ctrl);
+}
+
+void enable_mpu(void)
+{
+	writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_PRIVDEFENA, &V7M_MPU->ctrl);
+
+	/* Make sure new mpu config is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+void mpu_config(struct mpu_region_config *reg_config)
+{
+	uint32_t attr;
+
+	attr = get_attr_encoding(reg_config->mr_attr);
+
+	writel(reg_config->start_addr | VALID_REGION | reg_config->region_no,
+	       &V7M_MPU->rbar);
+
+	writel(reg_config->xn << XN_SHIFT | reg_config->ap << AP_SHIFT | attr
+		| reg_config->reg_size << REGION_SIZE_SHIFT | ENABLE_REGION
+	       , &V7M_MPU->rasr);
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv7m/start.S b/roms/u-boot/arch/arm/cpu/armv7m/start.S
new file mode 100644
index 000000000..0c07f2140
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7m/start.S
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ */
+
+#include <asm/assembler.h>
+
+.globl	reset
+.type reset, %function
+reset:
+	W(b)	_main
+
+.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+	mov	pc, lr
diff --git a/roms/u-boot/arch/arm/cpu/armv7m/systick-timer.c b/roms/u-boot/arch/arm/cpu/armv7m/systick-timer.c
new file mode 100644
index 000000000..556eaf8c7
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv7m/systick-timer.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ARM Cortex M3/M4/M7 SysTick timer driver
+ * (C) Copyright 2017 Renesas Electronics Europe Ltd
+ *
+ * Based on arch/arm/mach-stm32/stm32f1/timer.c
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ *
+ * Copyright 2015 ATS Advanced Telematics Systems GmbH
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * The SysTick timer is a 24-bit count down timer. The clock can be either the
+ * CPU clock or a reference clock. Since the timer will wrap around very quickly
+ * when using the CPU clock, and we do not handle the timer interrupts, it is
+ * expected that this driver is only ever used with a slow reference clock.
+ *
+ * The number of reference clock ticks that correspond to 10ms is normally
+ * defined in the SysTick Calibration register's TENMS field. However, on some
+ * devices this is wrong, so this driver allows the clock rate to be defined
+ * using CONFIG_SYS_HZ_CLOCK.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* SysTick Base Address - fixed for all Cortex M3, M4 and M7 devices */
+#define SYSTICK_BASE		0xE000E010
+
+struct cm3_systick {
+	uint32_t ctrl;
+	uint32_t reload_val;
+	uint32_t current_val;
+	uint32_t calibration;
+};
+
+#define TIMER_MAX_VAL		0x00FFFFFF
+#define SYSTICK_CTRL_EN		BIT(0)
+/* Clock source: 0 = Ref clock, 1 = CPU clock */
+#define SYSTICK_CTRL_CPU_CLK	BIT(2)
+#define SYSTICK_CAL_NOREF	BIT(31)
+#define SYSTICK_CAL_SKEW	BIT(30)
+#define SYSTICK_CAL_TENMS_MASK	0x00FFFFFF
+
+/* read the 24-bit timer */
+static ulong read_timer(void)
+{
+	struct cm3_systick *systick = (struct cm3_systick *)SYSTICK_BASE;
+
+	/* The timer counts down, therefore convert to an incrementing timer */
+	return TIMER_MAX_VAL - readl(&systick->current_val);
+}
+
+int timer_init(void)
+{
+	struct cm3_systick *systick = (struct cm3_systick *)SYSTICK_BASE;
+	u32 cal;
+
+	writel(TIMER_MAX_VAL, &systick->reload_val);
+	/* Any write to current_val reg clears it to 0 */
+	writel(0, &systick->current_val);
+
+	cal = readl(&systick->calibration);
+	if (cal & SYSTICK_CAL_NOREF)
+		/* Use CPU clock, no interrupts */
+		writel(SYSTICK_CTRL_EN | SYSTICK_CTRL_CPU_CLK, &systick->ctrl);
+	else
+		/* Use external clock, no interrupts */
+		writel(SYSTICK_CTRL_EN, &systick->ctrl);
+
+	/*
+	 * If the TENMS field is inexact or wrong, specify the clock rate using
+	 * CONFIG_SYS_HZ_CLOCK.
+	 */
+#if defined(CONFIG_SYS_HZ_CLOCK)
+	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK;
+#else
+	gd->arch.timer_rate_hz = (cal & SYSTICK_CAL_TENMS_MASK) * 100;
+#endif
+
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+	gd->arch.lastinc = read_timer();
+
+	return 0;
+}
+
+/* return milli-seconds timer value */
+ulong get_timer(ulong base)
+{
+	unsigned long long t = get_ticks() * 1000;
+
+	return (ulong)((t / gd->arch.timer_rate_hz)) - base;
+}
+
+unsigned long long get_ticks(void)
+{
+	u32 now = read_timer();
+
+	if (now >= gd->arch.lastinc)
+		gd->arch.tbl += (now - gd->arch.lastinc);
+	else
+		gd->arch.tbl += (TIMER_MAX_VAL - gd->arch.lastinc) + now;
+
+	gd->arch.lastinc = now;
+
+	return gd->arch.tbl;
+}
+
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/Kconfig b/roms/u-boot/arch/arm/cpu/armv8/Kconfig
new file mode 100644
index 000000000..b7a10a8e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/Kconfig
@@ -0,0 +1,177 @@
+if ARM64
+
+config ARMV8_SPL_EXCEPTION_VECTORS
+	bool "Install crash dump exception vectors"
+	depends on SPL
+	default n
+	help
+	  The default exception vector table is only used for the crash
+	  dump, but still takes quite a lot of space in the image size.
+
+	  Say N here if you are running out of code space in the image
+	  and want to save some space at the cost of less debugging info.
+
+config ARMV8_MULTIENTRY
+        bool "Enable multiple CPUs to enter into U-Boot"
+
+config ARMV8_SET_SMPEN
+        bool "Enable data coherency with other cores in cluster"
+        help
+	  Say Y here if there is not any trust firmware to set
+	  CPUECTLR_EL1.SMPEN bit before U-Boot.
+
+	  For A53, it enables data coherency with other cores in the
+	  cluster, and for A57/A72, it enables receiving of instruction
+	  cache and TLB maintenance operations.
+	  Cortex A53/57/72 cores require CPUECTLR_EL1.SMPEN set even
+	  for single core systems. Unfortunately write access to this
+	  register may be controlled by EL3/EL2 firmware. To be more
+	  precise, by default (if there is EL2/EL3 firmware running)
+	  this register is RO for NS EL1.
+	  This switch can be used to avoid writing to CPUECTLR_EL1,
+	  it can be safely enabled when EL2/EL3 initialized SMPEN bit
+	  or when CPU implementation doesn't include that register.
+
+config ARMV8_SPIN_TABLE
+	bool "Support spin-table enable method"
+	depends on ARMV8_MULTIENTRY && OF_LIBFDT
+	help
+	  Say Y here to support "spin-table" enable method for booting Linux.
+
+	  To use this feature, you must do:
+	    - Specify enable-method = "spin-table" in each CPU node in the
+	      Device Tree you are using to boot the kernel
+	    - Bring secondary CPUs into U-Boot proper in a board specific
+	      manner.  This must be done *after* relocation.  Otherwise, the
+	      secondary CPUs will spin in unprotected memory area because the
+	      master CPU protects the relocated spin code.
+
+	  U-Boot automatically does:
+	    - Set "cpu-release-addr" property of each CPU node
+	      (overwrites it if already exists).
+	    - Reserve the code for the spin-table and the release address
+	      via a /memreserve/ region in the Device Tree.
+
+menu "ARMv8 secure monitor firmware"
+config ARMV8_SEC_FIRMWARE_SUPPORT
+	bool "Enable ARMv8 secure monitor firmware framework support"
+	select FIT
+	select OF_LIBFDT
+	help
+	  This framework is aimed at making secure monitor firmware load
+	  process brief.
+	  Note: Only FIT format image is supported.
+	  You should prepare and provide the below information:
+	    - Address of secure firmware.
+	    - Address to hold the return address from secure firmware.
+	    - Secure firmware FIT image related information.
+	      Such as: SEC_FIRMWARE_FIT_IMAGE and SEC_FIRMWARE_FIT_CNF_NAME
+	    - The target exception level that secure monitor firmware will
+	      return to.
+
+config SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+	bool "Enable ARMv8 secure monitor firmware framework support for SPL"
+	select SPL_FIT
+	select SPL_OF_LIBFDT
+	help
+	  Say Y here to support this framework in SPL phase.
+
+config SPL_RECOVER_DATA_SECTION
+	bool "save/restore SPL data section"
+	help
+	  Say Y here to save SPL data section for cold boot, and restore
+	  at warm boot in SPL phase.
+
+config SEC_FIRMWARE_ARMV8_PSCI
+	bool "PSCI implementation in secure monitor firmware"
+	depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+	help
+	  This config enables the ARMv8 PSCI implementation in secure monitor
+	  firmware. This is a private PSCI implementation and different from
+	  those implemented under the common ARMv8 PSCI framework.
+
+config ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT
+	bool "ARMv8 secure monitor firmware ERET address byteorder swap"
+	depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+	help
+	  Say Y here when the endianness of the register or memory holding the
+	  Secure firmware exception return address is different with core's.
+
+endmenu
+
+config PSCI_RESET
+	bool "Use PSCI for reset and shutdown"
+	default y
+	select ARM_SMCCC if OF_CONTROL
+	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
+		   !TARGET_LS2080AQDS && \
+		   !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
+		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
+		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
+		   !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
+		   !TARGET_LS1012AFRWY && \
+		   !TARGET_LS1028ARDB && !TARGET_LS1028AQDS && \
+		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
+		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
+		   !TARGET_LS1046AFRWY && \
+		   !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \
+		   !TARGET_LX2160AQDS && !TARGET_LX2162AQDS && \
+		   !ARCH_UNIPHIER
+	help
+	  Most armv8 systems have PSCI support enabled in EL3, either through
+	  ARM Trusted Firmware or other firmware.
+
+	  On these systems, we do not need to implement system reset manually,
+	  but can instead rely on higher level firmware to deal with it.
+
+	  Select Y here to make use of PSCI calls for system reset
+
+config ARMV8_PSCI
+	bool "Enable PSCI support" if EXPERT
+	default n
+	help
+	  PSCI is Power State Coordination Interface defined by ARM.
+	  The PSCI in U-boot provides a general framework and each platform
+	  can implement their own specific PSCI functions.
+	  Say Y here to enable PSCI support on ARMv8 platform.
+
+config ARMV8_PSCI_NR_CPUS
+	int "Maximum supported CPUs for PSCI"
+	depends on ARMV8_PSCI
+	default 4
+	help
+	  The maximum number of CPUs supported in the PSCI firmware.
+	  It is no problem to set a larger value than the number of CPUs in
+	  the actual hardware implementation.
+
+config ARMV8_PSCI_CPUS_PER_CLUSTER
+	int "Number of CPUs per cluster"
+	depends on ARMV8_PSCI
+	default 0
+	help
+	  The number of CPUs per cluster, suppose each cluster has same number
+	  of CPU cores, platforms with asymmetric clusters don't apply here.
+	  A value 0 or no definition of it works for single cluster system.
+	  System with multi-cluster should difine their own exact value.
+
+config ARMV8_EA_EL3_FIRST
+	bool "External aborts and SError interrupt exception are taken in EL3"
+	default n
+	help
+	  Exception handling at all exception levels for External Abort and
+	  SError interrupt exception are taken in EL3.
+
+if SYS_HAS_ARMV8_SECURE_BASE
+
+config ARMV8_SECURE_BASE
+	hex "Secure address for PSCI image"
+	depends on ARMV8_PSCI
+	help
+	  Address for placing the PSCI text, data and stack sections.
+	  If not defined, the PSCI sections are placed together with the u-boot
+	  but platform can choose to place PSCI code image separately in other
+	  places such as some secure RAM built-in SOC etc.
+
+endif
+
+endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/Makefile b/roms/u-boot/arch/arm/cpu/armv8/Makefile
new file mode 100644
index 000000000..d85ddde43
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/Makefile
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	:= start.o
+
+obj-y	+= cpu.o
+ifndef CONFIG_$(SPL_TPL_)TIMER
+obj-$(CONFIG_SYS_ARCH_TIMER) += generic_timer.o
+endif
+ifndef CONFIG_$(SPL_)SYS_DCACHE_OFF
+obj-y	+= cache_v8.o
+obj-y	+= cache.o
+endif
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) += exceptions.o
+else
+obj-y	+= exceptions.o
+obj-y	+= exception_level.o
+endif
+obj-y	+= tlb.o
+obj-y	+= transition.o
+ifndef CONFIG_ARMV8_PSCI
+obj-y	+= fwcall.o
+endif
+obj-y	+= cpu-dt.o
+obj-$(CONFIG_ARM_SMCCC)		+= smccc-call.o
+
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_ARMV8_SPIN_TABLE) += spin_table.o spin_table_v8.o
+else
+obj-$(CONFIG_ARCH_SUNXI) += fel_utils.o
+endif
+obj-$(CONFIG_$(SPL_)ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_RECOVER_DATA_SECTION) += spl_data.o
+endif
+
+obj-$(CONFIG_FSL_LAYERSCAPE) += fsl-layerscape/
+obj-$(CONFIG_S32V234) += s32v234/
+obj-$(CONFIG_TARGET_HIKEY) += hisilicon/
+obj-$(CONFIG_ARMV8_PSCI) += psci.o
+obj-$(CONFIG_ARCH_SUNXI) += lowlevel_init.o
+obj-$(CONFIG_TARGET_BCMNS3) += bcmns3/
+obj-$(CONFIG_XEN) += xen/
diff --git a/roms/u-boot/arch/arm/cpu/armv8/bcmns3/Makefile b/roms/u-boot/arch/arm/cpu/armv8/bcmns3/Makefile
new file mode 100644
index 000000000..a35e29d11
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/bcmns3/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2020 Broadcom.
+
+obj-y	+= lowlevel.o
diff --git a/roms/u-boot/arch/arm/cpu/armv8/bcmns3/lowlevel.S b/roms/u-boot/arch/arm/cpu/armv8/bcmns3/lowlevel.S
new file mode 100644
index 000000000..bf1a17ab0
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/bcmns3/lowlevel.S
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 Broadcom.
+ *
+ */
+
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+hnf_pstate_poll:
+	/* x0 has the desired status, return 0 for success, 1 for timeout
+	 * clobber x1, x2, x3, x4, x6, x7
+	 */
+	mov	x1, x0
+	mov	x7, #0			/* flag for timeout */
+	mrs	x3, cntpct_el0		/* read timer */
+	mov	w0, #600
+	mov	w6, #1000
+	mul	w0, w0, w6
+	add	x3, x3, x0		/* timeout after 100 microseconds */
+	mov	x0, #0x18
+	movk	x0, #0x6120, lsl #16	/* HNF0_PSTATE_STATUS */
+	mov	w6, #4			/* HN-F node count */
+1:
+	ldr	x2, [x0]
+	cmp	x2, x1			/* check status */
+	b.eq	2f
+	mrs	x4, cntpct_el0
+	cmp	x4, x3
+	b.ls	1b
+	mov	x7, #1			/* timeout */
+	b	3f
+2:
+	add	x0, x0, #0x10000	/* move to next node */
+	subs	w6, w6, #1
+	cbnz	w6, 1b
+3:
+	mov	x0, x7
+	ret
+
+hnf_set_pstate:
+	/* x0 has the desired state, clobber x1, x2, x6 */
+	mov	x1, x0
+	/* power state to SFONLY */
+	mov	w6, #4			/* HN-F node count */
+	mov	x0, #0x10
+	movk x0, #0x6120, lsl #16		/* HNF0_PSTATE_REQ */
+1:	/* set pstate to sfonly */
+	ldr	x2, [x0]
+	and	x2, x2, #0xfffffffffffffffc	/* & HNFPSTAT_MASK */
+	orr	x2, x2, x1
+	str	x2, [x0]
+	add	x0, x0, #0x10000	/* move to next node */
+	subs	w6, w6, #1
+	cbnz	w6, 1b
+
+	ret
+
+ENTRY(__asm_flush_l3_dcache)
+	/*
+	 * Return status in x0
+	 *    success 0
+	 *    timeout 1 for setting SFONLY, 2 for FAM, 3 for both
+	 */
+	mov	x29, lr
+	mov	x8, #0
+
+	dsb	sy
+	mov	x0, #0x1		/* HNFPSTAT_SFONLY */
+	bl	hnf_set_pstate
+
+	mov	x0, #0x4		/* SFONLY status */
+	bl	hnf_pstate_poll
+	cbz	x0, 1f
+	mov	x8, #1			/* timeout */
+1:
+	dsb	sy
+	mov	x0, #0x3		/* HNFPSTAT_FAM */
+	bl	hnf_set_pstate
+
+	mov	x0, #0xc		/* FAM status */
+	bl	hnf_pstate_poll
+	cbz	x0, 1f
+	add	x8, x8, #0x2
+1:
+	mov	x0, x8
+	mov	lr, x29
+	ret
+ENDPROC(__asm_flush_l3_dcache)
+
+ENTRY(save_boot_params)
+/*
+ * void set_boot_params(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3)
+ */
+	adr	x4, bl33_info
+	str	x0, [x4]
+	b	save_boot_params_ret
+ENDPROC(save_boot_params)
diff --git a/roms/u-boot/arch/arm/cpu/armv8/cache.S b/roms/u-boot/arch/arm/cpu/armv8/cache.S
new file mode 100644
index 000000000..443d94c26
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/cache.S
@@ -0,0 +1,267 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * This file is based on sample code from ARMv8 ARM.
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/macro.h>
+#include <asm/system.h>
+#include <linux/linkage.h>
+
+/*
+ * void __asm_dcache_level(level)
+ *
+ * flush or invalidate one level cache.
+ *
+ * x0: cache level
+ * x1: 0 clean & invalidate, 1 invalidate only
+ * x2~x9: clobbered
+ */
+.pushsection .text.__asm_dcache_level, "ax"
+ENTRY(__asm_dcache_level)
+	lsl	x12, x0, #1
+	msr	csselr_el1, x12		/* select cache level */
+	isb				/* sync change of cssidr_el1 */
+	mrs	x6, ccsidr_el1		/* read the new cssidr_el1 */
+	and	x2, x6, #7		/* x2 <- log2(cache line size)-4 */
+	add	x2, x2, #4		/* x2 <- log2(cache line size) */
+	mov	x3, #0x3ff
+	and	x3, x3, x6, lsr #3	/* x3 <- max number of #ways */
+	clz	w5, w3			/* bit position of #ways */
+	mov	x4, #0x7fff
+	and	x4, x4, x6, lsr #13	/* x4 <- max number of #sets */
+	/* x12 <- cache level << 1 */
+	/* x2 <- line length offset */
+	/* x3 <- number of cache ways - 1 */
+	/* x4 <- number of cache sets - 1 */
+	/* x5 <- bit position of #ways */
+
+loop_set:
+	mov	x6, x3			/* x6 <- working copy of #ways */
+loop_way:
+	lsl	x7, x6, x5
+	orr	x9, x12, x7		/* map way and level to cisw value */
+	lsl	x7, x4, x2
+	orr	x9, x9, x7		/* map set number to cisw value */
+	tbz	w1, #0, 1f
+	dc	isw, x9
+	b	2f
+1:	dc	cisw, x9		/* clean & invalidate by set/way */
+2:	subs	x6, x6, #1		/* decrement the way */
+	b.ge	loop_way
+	subs	x4, x4, #1		/* decrement the set */
+	b.ge	loop_set
+
+	ret
+ENDPROC(__asm_dcache_level)
+.popsection
+
+/*
+ * void __asm_flush_dcache_all(int invalidate_only)
+ *
+ * x0: 0 clean & invalidate, 1 invalidate only
+ *
+ * flush or invalidate all data cache by SET/WAY.
+ */
+.pushsection .text.__asm_dcache_all, "ax"
+ENTRY(__asm_dcache_all)
+	mov	x1, x0
+	dsb	sy
+	mrs	x10, clidr_el1		/* read clidr_el1 */
+	lsr	x11, x10, #24
+	and	x11, x11, #0x7		/* x11 <- loc */
+	cbz	x11, finished		/* if loc is 0, exit */
+	mov	x15, lr
+	mov	x0, #0			/* start flush at cache level 0 */
+	/* x0  <- cache level */
+	/* x10 <- clidr_el1 */
+	/* x11 <- loc */
+	/* x15 <- return address */
+
+loop_level:
+	lsl	x12, x0, #1
+	add	x12, x12, x0		/* x0 <- tripled cache level */
+	lsr	x12, x10, x12
+	and	x12, x12, #7		/* x12 <- cache type */
+	cmp	x12, #2
+	b.lt	skip			/* skip if no cache or icache */
+	bl	__asm_dcache_level	/* x1 = 0 flush, 1 invalidate */
+skip:
+	add	x0, x0, #1		/* increment cache level */
+	cmp	x11, x0
+	b.gt	loop_level
+
+	mov	x0, #0
+	msr	csselr_el1, x0		/* restore csselr_el1 */
+	dsb	sy
+	isb
+	mov	lr, x15
+
+finished:
+	ret
+ENDPROC(__asm_dcache_all)
+.popsection
+
+.pushsection .text.__asm_flush_dcache_all, "ax"
+ENTRY(__asm_flush_dcache_all)
+	mov	x0, #0
+	b	__asm_dcache_all
+ENDPROC(__asm_flush_dcache_all)
+.popsection
+
+.pushsection .text.__asm_invalidate_dcache_all, "ax"
+ENTRY(__asm_invalidate_dcache_all)
+	mov	x0, #0x1
+	b	__asm_dcache_all
+ENDPROC(__asm_invalidate_dcache_all)
+.popsection
+
+/*
+ * void __asm_flush_dcache_range(start, end)
+ *
+ * clean & invalidate data cache in the range
+ *
+ * x0: start address
+ * x1: end address
+ */
+.pushsection .text.__asm_flush_dcache_range, "ax"
+ENTRY(__asm_flush_dcache_range)
+	mrs	x3, ctr_el0
+	lsr	x3, x3, #16
+	and	x3, x3, #0xf
+	mov	x2, #4
+	lsl	x2, x2, x3		/* cache line size */
+
+	/* x2 <- minimal cache line size in cache system */
+	sub	x3, x2, #1
+	bic	x0, x0, x3
+1:	dc	civac, x0	/* clean & invalidate data or unified cache */
+	add	x0, x0, x2
+	cmp	x0, x1
+	b.lo	1b
+	dsb	sy
+	ret
+ENDPROC(__asm_flush_dcache_range)
+.popsection
+/*
+ * void __asm_invalidate_dcache_range(start, end)
+ *
+ * invalidate data cache in the range
+ *
+ * x0: start address
+ * x1: end address
+ */
+.pushsection .text.__asm_invalidate_dcache_range, "ax"
+ENTRY(__asm_invalidate_dcache_range)
+	mrs	x3, ctr_el0
+	ubfm	x3, x3, #16, #19
+	mov	x2, #4
+	lsl	x2, x2, x3		/* cache line size */
+
+	/* x2 <- minimal cache line size in cache system */
+	sub	x3, x2, #1
+	bic	x0, x0, x3
+1:	dc	ivac, x0	/* invalidate data or unified cache */
+	add	x0, x0, x2
+	cmp	x0, x1
+	b.lo	1b
+	dsb	sy
+	ret
+ENDPROC(__asm_invalidate_dcache_range)
+.popsection
+
+/*
+ * void __asm_invalidate_icache_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+.pushsection .text.__asm_invalidate_icache_all, "ax"
+ENTRY(__asm_invalidate_icache_all)
+	ic	ialluis
+	isb	sy
+	ret
+ENDPROC(__asm_invalidate_icache_all)
+.popsection
+
+.pushsection .text.__asm_invalidate_l3_dcache, "ax"
+ENTRY(__asm_invalidate_l3_dcache)
+	mov	x0, #0			/* return status as success */
+	ret
+ENDPROC(__asm_invalidate_l3_dcache)
+	.weak	__asm_invalidate_l3_dcache
+.popsection
+
+.pushsection .text.__asm_flush_l3_dcache, "ax"
+ENTRY(__asm_flush_l3_dcache)
+	mov	x0, #0			/* return status as success */
+	ret
+ENDPROC(__asm_flush_l3_dcache)
+	.weak	__asm_flush_l3_dcache
+.popsection
+
+.pushsection .text.__asm_invalidate_l3_icache, "ax"
+ENTRY(__asm_invalidate_l3_icache)
+	mov	x0, #0			/* return status as success */
+	ret
+ENDPROC(__asm_invalidate_l3_icache)
+	.weak	__asm_invalidate_l3_icache
+.popsection
+
+/*
+ * void __asm_switch_ttbr(ulong new_ttbr)
+ *
+ * Safely switches to a new page table.
+ */
+.pushsection .text.__asm_switch_ttbr, "ax"
+ENTRY(__asm_switch_ttbr)
+	/* x2 = SCTLR (alive throghout the function) */
+	switch_el x4, 3f, 2f, 1f
+3:	mrs	x2, sctlr_el3
+	b	0f
+2:	mrs	x2, sctlr_el2
+	b	0f
+1:	mrs	x2, sctlr_el1
+0:
+
+	/* Unset CR_M | CR_C | CR_I from SCTLR to disable all caches */
+	movn	x1, #(CR_M | CR_C | CR_I)
+	and	x1, x2, x1
+	switch_el x4, 3f, 2f, 1f
+3:	msr	sctlr_el3, x1
+	b	0f
+2:	msr	sctlr_el2, x1
+	b	0f
+1:	msr	sctlr_el1, x1
+0:	isb
+
+	/* This call only clobbers x30 (lr) and x9 (unused) */
+	mov	x3, x30
+	bl	__asm_invalidate_tlb_all
+
+	/* From here on we're running safely with caches disabled */
+
+	/* Set TTBR to our first argument */
+	switch_el x4, 3f, 2f, 1f
+3:	msr	ttbr0_el3, x0
+	b	0f
+2:	msr	ttbr0_el2, x0
+	b	0f
+1:	msr	ttbr0_el1, x0
+0:	isb
+
+	/* Restore original SCTLR and thus enable caches again */
+	switch_el x4, 3f, 2f, 1f
+3:	msr	sctlr_el3, x2
+	b	0f
+2:	msr	sctlr_el2, x2
+	b	0f
+1:	msr	sctlr_el1, x2
+0:	isb
+
+	ret	x3
+ENDPROC(__asm_switch_ttbr)
+.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv8/cache_v8.c b/roms/u-boot/arch/arm/cpu/armv8/cache_v8.c
new file mode 100644
index 000000000..15cecb5e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/cache_v8.c
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2016
+ * Alexander Graf <agraf@suse.de>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/system.h>
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+
+/*
+ *  With 4k page granule, a virtual address is split into 4 lookup parts
+ *  spanning 9 bits each:
+ *
+ *    _______________________________________________
+ *   |       |       |       |       |       |       |
+ *   |   0   |  Lv0  |  Lv1  |  Lv2  |  Lv3  |  off  |
+ *   |_______|_______|_______|_______|_______|_______|
+ *     63-48   47-39   38-30   29-21   20-12   11-00
+ *
+ *             mask        page size
+ *
+ *    Lv0: FF8000000000       --
+ *    Lv1:   7FC0000000       1G
+ *    Lv2:     3FE00000       2M
+ *    Lv3:       1FF000       4K
+ *    off:          FFF
+ */
+
+u64 get_tcr(int el, u64 *pips, u64 *pva_bits)
+{
+	u64 max_addr = 0;
+	u64 ips, va_bits;
+	u64 tcr;
+	int i;
+
+	/* Find the largest address we need to support */
+	for (i = 0; mem_map[i].size || mem_map[i].attrs; i++)
+		max_addr = max(max_addr, mem_map[i].virt + mem_map[i].size);
+
+	/* Calculate the maximum physical (and thus virtual) address */
+	if (max_addr > (1ULL << 44)) {
+		ips = 5;
+		va_bits = 48;
+	} else  if (max_addr > (1ULL << 42)) {
+		ips = 4;
+		va_bits = 44;
+	} else  if (max_addr > (1ULL << 40)) {
+		ips = 3;
+		va_bits = 42;
+	} else  if (max_addr > (1ULL << 36)) {
+		ips = 2;
+		va_bits = 40;
+	} else  if (max_addr > (1ULL << 32)) {
+		ips = 1;
+		va_bits = 36;
+	} else {
+		ips = 0;
+		va_bits = 32;
+	}
+
+	if (el == 1) {
+		tcr = TCR_EL1_RSVD | (ips << 32) | TCR_EPD1_DISABLE;
+	} else if (el == 2) {
+		tcr = TCR_EL2_RSVD | (ips << 16);
+	} else {
+		tcr = TCR_EL3_RSVD | (ips << 16);
+	}
+
+	/* PTWs cacheable, inner/outer WBWA and inner shareable */
+	tcr |= TCR_TG0_4K | TCR_SHARED_INNER | TCR_ORGN_WBWA | TCR_IRGN_WBWA;
+	tcr |= TCR_T0SZ(va_bits);
+
+	if (pips)
+		*pips = ips;
+	if (pva_bits)
+		*pva_bits = va_bits;
+
+	return tcr;
+}
+
+#define MAX_PTE_ENTRIES 512
+
+static int pte_type(u64 *pte)
+{
+	return *pte & PTE_TYPE_MASK;
+}
+
+/* Returns the LSB number for a PTE on level <level> */
+static int level2shift(int level)
+{
+	/* Page is 12 bits wide, every level translates 9 bits */
+	return (12 + 9 * (3 - level));
+}
+
+static u64 *find_pte(u64 addr, int level)
+{
+	int start_level = 0;
+	u64 *pte;
+	u64 idx;
+	u64 va_bits;
+	int i;
+
+	debug("addr=%llx level=%d\n", addr, level);
+
+	get_tcr(0, NULL, &va_bits);
+	if (va_bits < 39)
+		start_level = 1;
+
+	if (level < start_level)
+		return NULL;
+
+	/* Walk through all page table levels to find our PTE */
+	pte = (u64*)gd->arch.tlb_addr;
+	for (i = start_level; i < 4; i++) {
+		idx = (addr >> level2shift(i)) & 0x1FF;
+		pte += idx;
+		debug("idx=%llx PTE %p at level %d: %llx\n", idx, pte, i, *pte);
+
+		/* Found it */
+		if (i == level)
+			return pte;
+		/* PTE is no table (either invalid or block), can't traverse */
+		if (pte_type(pte) != PTE_TYPE_TABLE)
+			return NULL;
+		/* Off to the next level */
+		pte = (u64*)(*pte & 0x0000fffffffff000ULL);
+	}
+
+	/* Should never reach here */
+	return NULL;
+}
+
+/* Returns and creates a new full table (512 entries) */
+static u64 *create_table(void)
+{
+	u64 *new_table = (u64*)gd->arch.tlb_fillptr;
+	u64 pt_len = MAX_PTE_ENTRIES * sizeof(u64);
+
+	/* Allocate MAX_PTE_ENTRIES pte entries */
+	gd->arch.tlb_fillptr += pt_len;
+
+	if (gd->arch.tlb_fillptr - gd->arch.tlb_addr > gd->arch.tlb_size)
+		panic("Insufficient RAM for page table: 0x%lx > 0x%lx. "
+		      "Please increase the size in get_page_table_size()",
+			gd->arch.tlb_fillptr - gd->arch.tlb_addr,
+			gd->arch.tlb_size);
+
+	/* Mark all entries as invalid */
+	memset(new_table, 0, pt_len);
+
+	return new_table;
+}
+
+static void set_pte_table(u64 *pte, u64 *table)
+{
+	/* Point *pte to the new table */
+	debug("Setting %p to addr=%p\n", pte, table);
+	*pte = PTE_TYPE_TABLE | (ulong)table;
+}
+
+/* Splits a block PTE into table with subpages spanning the old block */
+static void split_block(u64 *pte, int level)
+{
+	u64 old_pte = *pte;
+	u64 *new_table;
+	u64 i = 0;
+	/* level describes the parent level, we need the child ones */
+	int levelshift = level2shift(level + 1);
+
+	if (pte_type(pte) != PTE_TYPE_BLOCK)
+		panic("PTE %p (%llx) is not a block. Some driver code wants to "
+		      "modify dcache settings for an range not covered in "
+		      "mem_map.", pte, old_pte);
+
+	new_table = create_table();
+	debug("Splitting pte %p (%llx) into %p\n", pte, old_pte, new_table);
+
+	for (i = 0; i < MAX_PTE_ENTRIES; i++) {
+		new_table[i] = old_pte | (i << levelshift);
+
+		/* Level 3 block PTEs have the table type */
+		if ((level + 1) == 3)
+			new_table[i] |= PTE_TYPE_TABLE;
+
+		debug("Setting new_table[%lld] = %llx\n", i, new_table[i]);
+	}
+
+	/* Set the new table into effect */
+	set_pte_table(pte, new_table);
+}
+
+/* Add one mm_region map entry to the page tables */
+static void add_map(struct mm_region *map)
+{
+	u64 *pte;
+	u64 virt = map->virt;
+	u64 phys = map->phys;
+	u64 size = map->size;
+	u64 attrs = map->attrs | PTE_TYPE_BLOCK | PTE_BLOCK_AF;
+	u64 blocksize;
+	int level;
+	u64 *new_table;
+
+	while (size) {
+		pte = find_pte(virt, 0);
+		if (pte && (pte_type(pte) == PTE_TYPE_FAULT)) {
+			debug("Creating table for virt 0x%llx\n", virt);
+			new_table = create_table();
+			set_pte_table(pte, new_table);
+		}
+
+		for (level = 1; level < 4; level++) {
+			pte = find_pte(virt, level);
+			if (!pte)
+				panic("pte not found\n");
+
+			blocksize = 1ULL << level2shift(level);
+			debug("Checking if pte fits for virt=%llx size=%llx blocksize=%llx\n",
+			      virt, size, blocksize);
+			if (size >= blocksize && !(virt & (blocksize - 1))) {
+				/* Page fits, create block PTE */
+				debug("Setting PTE %p to block virt=%llx\n",
+				      pte, virt);
+				if (level == 3)
+					*pte = phys | attrs | PTE_TYPE_PAGE;
+				else
+					*pte = phys | attrs;
+				virt += blocksize;
+				phys += blocksize;
+				size -= blocksize;
+				break;
+			} else if (pte_type(pte) == PTE_TYPE_FAULT) {
+				/* Page doesn't fit, create subpages */
+				debug("Creating subtable for virt 0x%llx blksize=%llx\n",
+				      virt, blocksize);
+				new_table = create_table();
+				set_pte_table(pte, new_table);
+			} else if (pte_type(pte) == PTE_TYPE_BLOCK) {
+				debug("Split block into subtable for virt 0x%llx blksize=0x%llx\n",
+				      virt, blocksize);
+				split_block(pte, level);
+			}
+		}
+	}
+}
+
+enum pte_type {
+	PTE_INVAL,
+	PTE_BLOCK,
+	PTE_LEVEL,
+};
+
+/*
+ * This is a recursively called function to count the number of
+ * page tables we need to cover a particular PTE range. If you
+ * call this with level = -1 you basically get the full 48 bit
+ * coverage.
+ */
+static int count_required_pts(u64 addr, int level, u64 maxaddr)
+{
+	int levelshift = level2shift(level);
+	u64 levelsize = 1ULL << levelshift;
+	u64 levelmask = levelsize - 1;
+	u64 levelend = addr + levelsize;
+	int r = 0;
+	int i;
+	enum pte_type pte_type = PTE_INVAL;
+
+	for (i = 0; mem_map[i].size || mem_map[i].attrs; i++) {
+		struct mm_region *map = &mem_map[i];
+		u64 start = map->virt;
+		u64 end = start + map->size;
+
+		/* Check if the PTE would overlap with the map */
+		if (max(addr, start) <= min(levelend, end)) {
+			start = max(addr, start);
+			end = min(levelend, end);
+
+			/* We need a sub-pt for this level */
+			if ((start & levelmask) || (end & levelmask)) {
+				pte_type = PTE_LEVEL;
+				break;
+			}
+
+			/* Lv0 can not do block PTEs, so do levels here too */
+			if (level <= 0) {
+				pte_type = PTE_LEVEL;
+				break;
+			}
+
+			/* PTE is active, but fits into a block */
+			pte_type = PTE_BLOCK;
+		}
+	}
+
+	/*
+	 * Block PTEs at this level are already covered by the parent page
+	 * table, so we only need to count sub page tables.
+	 */
+	if (pte_type == PTE_LEVEL) {
+		int sublevel = level + 1;
+		u64 sublevelsize = 1ULL << level2shift(sublevel);
+
+		/* Account for the new sub page table ... */
+		r = 1;
+
+		/* ... and for all child page tables that one might have */
+		for (i = 0; i < MAX_PTE_ENTRIES; i++) {
+			r += count_required_pts(addr, sublevel, maxaddr);
+			addr += sublevelsize;
+
+			if (addr >= maxaddr) {
+				/*
+				 * We reached the end of address space, no need
+				 * to look any further.
+				 */
+				break;
+			}
+		}
+	}
+
+	return r;
+}
+
+/* Returns the estimated required size of all page tables */
+__weak u64 get_page_table_size(void)
+{
+	u64 one_pt = MAX_PTE_ENTRIES * sizeof(u64);
+	u64 size = 0;
+	u64 va_bits;
+	int start_level = 0;
+
+	get_tcr(0, NULL, &va_bits);
+	if (va_bits < 39)
+		start_level = 1;
+
+	/* Account for all page tables we would need to cover our memory map */
+	size = one_pt * count_required_pts(0, start_level - 1, 1ULL << va_bits);
+
+	/*
+	 * We need to duplicate our page table once to have an emergency pt to
+	 * resort to when splitting page tables later on
+	 */
+	size *= 2;
+
+	/*
+	 * We may need to split page tables later on if dcache settings change,
+	 * so reserve up to 4 (random pick) page tables for that.
+	 */
+	size += one_pt * 4;
+
+	return size;
+}
+
+void setup_pgtables(void)
+{
+	int i;
+
+	if (!gd->arch.tlb_fillptr || !gd->arch.tlb_addr)
+		panic("Page table pointer not setup.");
+
+	/*
+	 * Allocate the first level we're on with invalidate entries.
+	 * If the starting level is 0 (va_bits >= 39), then this is our
+	 * Lv0 page table, otherwise it's the entry Lv1 page table.
+	 */
+	create_table();
+
+	/* Now add all MMU table entries one after another to the table */
+	for (i = 0; mem_map[i].size || mem_map[i].attrs; i++)
+		add_map(&mem_map[i]);
+}
+
+static void setup_all_pgtables(void)
+{
+	u64 tlb_addr = gd->arch.tlb_addr;
+	u64 tlb_size = gd->arch.tlb_size;
+
+	/* Reset the fill ptr */
+	gd->arch.tlb_fillptr = tlb_addr;
+
+	/* Create normal system page tables */
+	setup_pgtables();
+
+	/* Create emergency page tables */
+	gd->arch.tlb_size -= (uintptr_t)gd->arch.tlb_fillptr -
+			     (uintptr_t)gd->arch.tlb_addr;
+	gd->arch.tlb_addr = gd->arch.tlb_fillptr;
+	setup_pgtables();
+	gd->arch.tlb_emerg = gd->arch.tlb_addr;
+	gd->arch.tlb_addr = tlb_addr;
+	gd->arch.tlb_size = tlb_size;
+}
+
+/* to activate the MMU we need to set up virtual memory */
+__weak void mmu_setup(void)
+{
+	int el;
+
+	/* Set up page tables only once */
+	if (!gd->arch.tlb_fillptr)
+		setup_all_pgtables();
+
+	el = current_el();
+	set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
+			  MEMORY_ATTRIBUTES);
+
+	/* enable the mmu */
+	set_sctlr(get_sctlr() | CR_M);
+}
+
+/*
+ * Performs a invalidation of the entire data cache at all levels
+ */
+void invalidate_dcache_all(void)
+{
+	__asm_invalidate_dcache_all();
+	__asm_invalidate_l3_dcache();
+}
+
+/*
+ * Performs a clean & invalidation of the entire data cache at all levels.
+ * This function needs to be inline to avoid using stack.
+ * __asm_flush_l3_dcache return status of timeout
+ */
+inline void flush_dcache_all(void)
+{
+	int ret;
+
+	__asm_flush_dcache_all();
+	ret = __asm_flush_l3_dcache();
+	if (ret)
+		debug("flushing dcache returns 0x%x\n", ret);
+	else
+		debug("flushing dcache successfully.\n");
+}
+
+#ifndef CONFIG_SYS_DISABLE_DCACHE_OPS
+/*
+ * Invalidates range in all levels of D-cache/unified cache
+ */
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+	__asm_invalidate_dcache_range(start, stop);
+}
+
+/*
+ * Flush range(clean & invalidate) from all levels of D-cache/unified cache
+ */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	__asm_flush_dcache_range(start, stop);
+}
+#else
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+#endif /* CONFIG_SYS_DISABLE_DCACHE_OPS */
+
+void dcache_enable(void)
+{
+	/* The data cache is not active unless the mmu is enabled */
+	if (!(get_sctlr() & CR_M)) {
+		invalidate_dcache_all();
+		__asm_invalidate_tlb_all();
+		mmu_setup();
+	}
+
+	set_sctlr(get_sctlr() | CR_C);
+}
+
+void dcache_disable(void)
+{
+	uint32_t sctlr;
+
+	sctlr = get_sctlr();
+
+	/* if cache isn't enabled no need to disable */
+	if (!(sctlr & CR_C))
+		return;
+
+	set_sctlr(sctlr & ~(CR_C|CR_M));
+
+	flush_dcache_all();
+	__asm_invalidate_tlb_all();
+}
+
+int dcache_status(void)
+{
+	return (get_sctlr() & CR_C) != 0;
+}
+
+u64 *__weak arch_get_page_table(void) {
+	puts("No page table offset defined\n");
+
+	return NULL;
+}
+
+static bool is_aligned(u64 addr, u64 size, u64 align)
+{
+	return !(addr & (align - 1)) && !(size & (align - 1));
+}
+
+/* Use flag to indicate if attrs has more than d-cache attributes */
+static u64 set_one_region(u64 start, u64 size, u64 attrs, bool flag, int level)
+{
+	int levelshift = level2shift(level);
+	u64 levelsize = 1ULL << levelshift;
+	u64 *pte = find_pte(start, level);
+
+	/* Can we can just modify the current level block PTE? */
+	if (is_aligned(start, size, levelsize)) {
+		if (flag) {
+			*pte &= ~PMD_ATTRMASK;
+			*pte |= attrs & PMD_ATTRMASK;
+		} else {
+			*pte &= ~PMD_ATTRINDX_MASK;
+			*pte |= attrs & PMD_ATTRINDX_MASK;
+		}
+		debug("Set attrs=%llx pte=%p level=%d\n", attrs, pte, level);
+
+		return levelsize;
+	}
+
+	/* Unaligned or doesn't fit, maybe split block into table */
+	debug("addr=%llx level=%d pte=%p (%llx)\n", start, level, pte, *pte);
+
+	/* Maybe we need to split the block into a table */
+	if (pte_type(pte) == PTE_TYPE_BLOCK)
+		split_block(pte, level);
+
+	/* And then double-check it became a table or already is one */
+	if (pte_type(pte) != PTE_TYPE_TABLE)
+		panic("PTE %p (%llx) for addr=%llx should be a table",
+		      pte, *pte, start);
+
+	/* Roll on to the next page table level */
+	return 0;
+}
+
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
+				     enum dcache_option option)
+{
+	u64 attrs = PMD_ATTRINDX(option >> 2);
+	u64 real_start = start;
+	u64 real_size = size;
+
+	debug("start=%lx size=%lx\n", (ulong)start, (ulong)size);
+
+	if (!gd->arch.tlb_emerg)
+		panic("Emergency page table not setup.");
+
+	/*
+	 * We can not modify page tables that we're currently running on,
+	 * so we first need to switch to the "emergency" page tables where
+	 * we can safely modify our primary page tables and then switch back
+	 */
+	__asm_switch_ttbr(gd->arch.tlb_emerg);
+
+	/*
+	 * Loop through the address range until we find a page granule that fits
+	 * our alignment constraints, then set it to the new cache attributes
+	 */
+	while (size > 0) {
+		int level;
+		u64 r;
+
+		for (level = 1; level < 4; level++) {
+			/* Set d-cache attributes only */
+			r = set_one_region(start, size, attrs, false, level);
+			if (r) {
+				/* PTE successfully replaced */
+				size -= r;
+				start += r;
+				break;
+			}
+		}
+
+	}
+
+	/* We're done modifying page tables, switch back to our primary ones */
+	__asm_switch_ttbr(gd->arch.tlb_addr);
+
+	/*
+	 * Make sure there's nothing stale in dcache for a region that might
+	 * have caches off now
+	 */
+	flush_dcache_range(real_start, real_start + real_size);
+}
+
+/*
+ * Modify MMU table for a region with updated PXN/UXN/Memory type/valid bits.
+ * The procecess is break-before-make. The target region will be marked as
+ * invalid during the process of changing.
+ */
+void mmu_change_region_attr(phys_addr_t addr, size_t siz, u64 attrs)
+{
+	int level;
+	u64 r, size, start;
+
+	start = addr;
+	size = siz;
+	/*
+	 * Loop through the address range until we find a page granule that fits
+	 * our alignment constraints, then set it to "invalid".
+	 */
+	while (size > 0) {
+		for (level = 1; level < 4; level++) {
+			/* Set PTE to fault */
+			r = set_one_region(start, size, PTE_TYPE_FAULT, true,
+					   level);
+			if (r) {
+				/* PTE successfully invalidated */
+				size -= r;
+				start += r;
+				break;
+			}
+		}
+	}
+
+	flush_dcache_range(gd->arch.tlb_addr,
+			   gd->arch.tlb_addr + gd->arch.tlb_size);
+	__asm_invalidate_tlb_all();
+
+	/*
+	 * Loop through the address range until we find a page granule that fits
+	 * our alignment constraints, then set it to the new cache attributes
+	 */
+	start = addr;
+	size = siz;
+	while (size > 0) {
+		for (level = 1; level < 4; level++) {
+			/* Set PTE to new attributes */
+			r = set_one_region(start, size, attrs, true, level);
+			if (r) {
+				/* PTE successfully updated */
+				size -= r;
+				start += r;
+				break;
+			}
+		}
+	}
+	flush_dcache_range(gd->arch.tlb_addr,
+			   gd->arch.tlb_addr + gd->arch.tlb_size);
+	__asm_invalidate_tlb_all();
+}
+
+#else	/* !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+
+/*
+ * For SPL builds, we may want to not have dcache enabled. Any real U-Boot
+ * running however really wants to have dcache and the MMU active. Check that
+ * everything is sane and give the developer a hint if it isn't.
+ */
+#ifndef CONFIG_SPL_BUILD
+#error Please describe your MMU layout in CONFIG_SYS_MEM_MAP and enable dcache.
+#endif
+
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+
+void dcache_enable(void)
+{
+}
+
+void dcache_disable(void)
+{
+}
+
+int dcache_status(void)
+{
+	return 0;
+}
+
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
+				     enum dcache_option option)
+{
+}
+
+#endif	/* !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+
+void icache_enable(void)
+{
+	invalidate_icache_all();
+	set_sctlr(get_sctlr() | CR_I);
+}
+
+void icache_disable(void)
+{
+	set_sctlr(get_sctlr() & ~CR_I);
+}
+
+int icache_status(void)
+{
+	return (get_sctlr() & CR_I) != 0;
+}
+
+void invalidate_icache_all(void)
+{
+	__asm_invalidate_icache_all();
+	__asm_invalidate_l3_icache();
+}
+
+#else	/* !CONFIG_IS_ENABLED(SYS_ICACHE_OFF) */
+
+void icache_enable(void)
+{
+}
+
+void icache_disable(void)
+{
+}
+
+int icache_status(void)
+{
+	return 0;
+}
+
+void invalidate_icache_all(void)
+{
+}
+
+#endif	/* !CONFIG_IS_ENABLED(SYS_ICACHE_OFF) */
+
+/*
+ * Enable dCache & iCache, whether cache is actually enabled
+ * depend on CONFIG_SYS_DCACHE_OFF and CONFIG_SYS_ICACHE_OFF
+ */
+void __weak enable_caches(void)
+{
+	icache_enable();
+	dcache_enable();
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/config.mk b/roms/u-boot/arch/arm/cpu/armv8/config.mk
new file mode 100644
index 000000000..6f9093109
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/config.mk
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+PLATFORM_RELFLAGS += -fno-common -ffixed-x18
+
+PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
+
+EFI_LDS := elf_aarch64_efi.lds
+EFI_CRT0 := crt0_aarch64_efi.o
+EFI_RELOC := reloc_aarch64_efi.o
diff --git a/roms/u-boot/arch/arm/cpu/armv8/cpu-dt.c b/roms/u-boot/arch/arm/cpu/armv8/cpu-dt.c
new file mode 100644
index 000000000..61c38b17c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/cpu-dt.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 NXP Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/cache.h>
+#include <asm/psci.h>
+#include <asm/system.h>
+#include <asm/armv8/sec_firmware.h>
+
+#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT)
+int psci_update_dt(void *fdt)
+{
+	/*
+	 * If the PSCI in SEC Firmware didn't work, avoid to update the
+	 * device node of PSCI. But still return 0 instead of an error
+	 * number to support detecting PSCI dynamically and then switching
+	 * the SMP boot method between PSCI and spin-table.
+	 */
+	if (sec_firmware_support_psci_version() == PSCI_INVALID_VER)
+		return 0;
+	fdt_psci(fdt);
+
+#if defined(CONFIG_ARMV8_PSCI) && !defined(CONFIG_ARMV8_SECURE_BASE)
+	/* secure code lives in RAM, keep it alive */
+	fdt_add_mem_rsv(fdt, (unsigned long)__secure_start,
+			__secure_end - __secure_start);
+#endif
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/cpu.c b/roms/u-boot/arch/arm/cpu/armv8/cpu.c
new file mode 100644
index 000000000..ea40c55dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/cpu.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2008 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/cache.h>
+#include <asm/system.h>
+#include <asm/secure.h>
+#include <linux/compiler.h>
+
+/*
+ * sdelay() - simple spin loop.
+ *
+ * Will delay execution by roughly (@loops * 2) cycles.
+ * This is necessary to be used before timers are accessible.
+ *
+ * A value of "0" will results in 2^64 loops.
+ */
+void sdelay(unsigned long loops)
+{
+	__asm__ volatile ("1:\n" "subs %0, %0, #1\n"
+			  "b.ne 1b" : "=r" (loops) : "0"(loops) : "cc");
+}
+
+void __weak board_cleanup_before_linux(void){}
+
+int cleanup_before_linux(void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * disable interrupt and turn off caches etc ...
+	 */
+
+	board_cleanup_before_linux();
+
+	disable_interrupts();
+
+	/*
+	 * Turn off I-cache and invalidate it
+	 */
+	icache_disable();
+	invalidate_icache_all();
+
+	/*
+	 * turn off D-cache
+	 * dcache_disable() in turn flushes the d-cache and disables MMU
+	 */
+	dcache_disable();
+	invalidate_dcache_all();
+
+	return 0;
+}
+
+#ifdef CONFIG_ARMV8_PSCI
+static void relocate_secure_section(void)
+{
+#ifdef CONFIG_ARMV8_SECURE_BASE
+	size_t sz = __secure_end - __secure_start;
+
+	memcpy((void *)CONFIG_ARMV8_SECURE_BASE, __secure_start, sz);
+	flush_dcache_range(CONFIG_ARMV8_SECURE_BASE,
+			   CONFIG_ARMV8_SECURE_BASE + sz + 1);
+	invalidate_icache_all();
+#endif
+}
+
+void armv8_setup_psci(void)
+{
+	relocate_secure_section();
+	secure_ram_addr(psci_setup_vectors)();
+	secure_ram_addr(psci_arch_init)();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/exception_level.c b/roms/u-boot/arch/arm/cpu/armv8/exception_level.c
new file mode 100644
index 000000000..b11936548
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/exception_level.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Switch to non-secure mode
+ *
+ * Copyright (c) 2018 Heinrich Schuchardt
+ *
+ * This module contains the ARMv8 specific code required to adjust the exception
+ * level before booting an operating system.
+ */
+
+#include <common.h>
+#include <bootm.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <asm/setjmp.h>
+
+/**
+ * entry_non_secure() - entry point when switching to non-secure mode
+ *
+ * When switching to non-secure mode switch_to_non_secure_mode() calls this
+ * function passing a jump buffer. We use this jump buffer to restore the
+ * original stack and register state.
+ *
+ * @non_secure_jmp:	jump buffer for restoring stack and registers
+ */
+static void entry_non_secure(struct jmp_buf_data *non_secure_jmp)
+{
+	dcache_enable();
+	debug("Reached non-secure mode\n");
+
+	/* Restore stack and registers saved in switch_to_non_secure_mode() */
+	longjmp(non_secure_jmp, 1);
+}
+
+/**
+ * switch_to_non_secure_mode() - switch to non-secure mode
+ *
+ * Exception level EL3 is meant to be used by the secure monitor only (ARM
+ * trusted firmware being one embodiment). The operating system shall be
+ * started at exception level EL2. So here we check the exception level
+ * and switch it if necessary.
+ */
+void switch_to_non_secure_mode(void)
+{
+	struct jmp_buf_data non_secure_jmp;
+
+	/* On AArch64 we need to make sure we call our payload in < EL3 */
+	if (current_el() == 3) {
+		if (setjmp(&non_secure_jmp))
+			return;
+		dcache_disable();	/* flush cache before switch to EL2 */
+
+		/* Move into EL2 and keep running there */
+		armv8_switch_to_el2((uintptr_t)&non_secure_jmp, 0, 0, 0,
+				    (uintptr_t)entry_non_secure, ES_TO_AARCH64);
+	}
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/exceptions.S b/roms/u-boot/arch/arm/cpu/armv8/exceptions.S
new file mode 100644
index 000000000..a15af72e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/exceptions.S
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/ptrace.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * AArch64 exception vectors:
+ * We have four types of exceptions:
+ * - synchronous: traps, data aborts, undefined instructions, ...
+ * - IRQ: group 1 (normal) interrupts
+ * - FIQ: group 0 or secure interrupts
+ * - SError: fatal system errors
+ * There are entries for all four of those for different contexts:
+ * - from same exception level, when using the SP_EL0 stack pointer
+ * - from same exception level, when using the SP_ELx stack pointer
+ * - from lower exception level, when this is AArch64
+ * - from lower exception level, when this is AArch32
+ * Each of those 16 entries have space for 32 instructions, each entry must
+ * be 128 byte aligned, the whole table must be 2K aligned.
+ * The 32 instructions are not enough to save and restore all registers and
+ * to branch to the actual handler, so we split this up:
+ * Each entry saves the LR, branches to the save routine, then to the actual
+ * handler, then to the restore routine. The save and restore routines are
+ * each split in half and stuffed in the unused gap between the entries.
+ * Also as we do not run anything in a lower exception level, we just provide
+ * the first 8 entries for exceptions from the same EL.
+ */
+	.align	11
+	.globl	vectors
+vectors:
+	.align	7		/* Current EL Synchronous Thread */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_bad_sync
+	b	exception_exit
+
+/*
+ * Save (most of) the GP registers to the stack frame.
+ * This is the first part of the shared routine called into from all entries.
+ */
+_exception_entry:
+	stp	x27, x28, [sp, #-16]!
+	stp	x25, x26, [sp, #-16]!
+	stp	x23, x24, [sp, #-16]!
+	stp	x21, x22, [sp, #-16]!
+	stp	x19, x20, [sp, #-16]!
+	stp	x17, x18, [sp, #-16]!
+	stp	x15, x16, [sp, #-16]!
+	stp	x13, x14, [sp, #-16]!
+	stp	x11, x12, [sp, #-16]!
+	stp	x9, x10, [sp, #-16]!
+	stp	x7, x8, [sp, #-16]!
+	stp	x5, x6, [sp, #-16]!
+	stp	x3, x4, [sp, #-16]!
+	stp	x1, x2, [sp, #-16]!
+	b	_save_el_regs			/* jump to the second part */
+
+	.align	7		/* Current EL IRQ Thread */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_bad_irq
+	b	exception_exit
+
+/*
+ * Save exception specific context: ESR and ELR, for all exception levels.
+ * This is the second part of the shared routine called into from all entries.
+ */
+_save_el_regs:
+	/* Could be running at EL3/EL2/EL1 */
+	switch_el x11, 3f, 2f, 1f
+3:	mrs	x1, esr_el3
+	mrs	x2, elr_el3
+	b	0f
+2:	mrs	x1, esr_el2
+	mrs	x2, elr_el2
+	b	0f
+1:	mrs	x1, esr_el1
+	mrs	x2, elr_el1
+0:
+	stp	x2, x0, [sp, #-16]!
+	mov	x0, sp
+	ret
+
+	.align	7		/* Current EL FIQ Thread */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_bad_fiq
+				/* falling through to _exception_exit */
+/*
+ * Restore the exception return address, for all exception levels.
+ * This is the first part of the shared routine called into from all entries.
+ */
+exception_exit:
+	ldp	x2, x0, [sp],#16
+	switch_el x11, 3f, 2f, 1f
+3:	msr	elr_el3, x2
+	b	_restore_regs
+2:	msr	elr_el2, x2
+	b	_restore_regs
+1:	msr	elr_el1, x2
+	b	_restore_regs		/* jump to the second part */
+
+	.align	7		/* Current EL Error Thread */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_bad_error
+	b	exception_exit
+
+/*
+ * Restore the general purpose registers from the exception stack, then return.
+ * This is the second part of the shared routine called into from all entries.
+ */
+_restore_regs:
+	ldp	x1, x2, [sp],#16
+	ldp	x3, x4, [sp],#16
+	ldp	x5, x6, [sp],#16
+	ldp	x7, x8, [sp],#16
+	ldp	x9, x10, [sp],#16
+	ldp	x11, x12, [sp],#16
+	ldp	x13, x14, [sp],#16
+	ldp	x15, x16, [sp],#16
+	ldp	x17, x18, [sp],#16
+	ldp	x19, x20, [sp],#16
+	ldp	x21, x22, [sp],#16
+	ldp	x23, x24, [sp],#16
+	ldp	x25, x26, [sp],#16
+	ldp	x27, x28, [sp],#16
+	ldp	x29, x30, [sp],#16
+	eret
+
+	.align	7		 /* Current EL (SP_ELx) Synchronous Handler */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_sync
+	b	exception_exit
+
+	.align	7		 /* Current EL (SP_ELx) IRQ Handler */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_irq
+	b	exception_exit
+
+	.align	7		 /* Current EL (SP_ELx) FIQ Handler */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_fiq
+	b	exception_exit
+
+	.align	7		 /* Current EL (SP_ELx) Error Handler */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_error
+	b	exception_exit
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fel_utils.S b/roms/u-boot/arch/arm/cpu/armv8/fel_utils.S
new file mode 100644
index 000000000..7def44ad1
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fel_utils.S
@@ -0,0 +1,81 @@
+/*
+ * Utility functions for FEL mode, when running SPL in AArch64.
+ *
+ * Copyright (c) 2017 Arm Ltd.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/system.h>
+#include <linux/linkage.h>
+
+/*
+ * We don't overwrite save_boot_params() here, to save the FEL state upon
+ * entry, since this would run *after* the RMR reset, which clobbers that
+ * state.
+ * Instead we store the state _very_ early in the boot0 hook, *before*
+ * resetting to AArch64.
+ */
+
+/*
+ * The FEL routines in BROM run in AArch32.
+ * Reset back into 32-bit mode here and restore the saved FEL state
+ * afterwards.
+ * Resetting back into AArch32/EL3 using the RMR always enters the BROM,
+ * but we can use the CPU hotplug mechanism to branch back to our code
+ * immediately.
+ */
+ENTRY(return_to_fel)
+	/*
+	 * the RMR reset will clear all registers, so save the arguments
+	 * (LR and SP) in the fel_stash structure, which we read anyways later
+	 */
+	adr	x2, fel_stash
+	str	w0, [x2]
+	str	w1, [x2, #4]
+
+	adr	x1, fel_stash_addr	// to find the fel_stash address in AA32
+	str	w2, [x1]
+
+	ldr	x0, =0xfa50392f		// CPU hotplug magic
+#ifdef CONFIG_MACH_SUN50I_H616
+	ldr	x2, =(SUNXI_R_CPUCFG_BASE + 0x1c0)
+	str	w0, [x2], #0x4
+#elif CONFIG_MACH_SUN50I_H6
+	ldr	x2, =(SUNXI_RTC_BASE + 0x1b8)	// BOOT_CPU_HP_FLAG_REG
+	str	w0, [x2], #0x4
+#else
+	ldr	x2, =(SUNXI_CPUCFG_BASE + 0x1a4) // offset for CPU hotplug base
+	str	w0, [x2, #0x8]
+#endif
+	adr	x0, back_in_32
+	str	w0, [x2]
+
+	dsb	sy
+	isb	sy
+	mov	x0, #2			// RMR reset into AArch32
+	dsb	sy
+	msr	RMR_EL3, x0
+	isb	sy
+1:	wfi
+	b	1b
+
+/* AArch32 code to restore the state from fel_stash and return back to FEL. */
+back_in_32:
+	.word	0xe59f0028 	// ldr	r0, [pc, #40]	; load fel_stash address
+	.word	0xe5901008 	// ldr	r1, [r0, #8]
+	.word	0xe129f001 	// msr	CPSR_fc, r1
+	.word	0xf57ff06f	// isb
+	.word	0xe590d000 	// ldr	sp, [r0]
+	.word	0xe590e004 	// ldr	lr, [r0, #4]
+	.word	0xe5901010 	// ldr	r1, [r0, #16]
+	.word	0xee0c1f10 	// mcr	15, 0, r1, cr12, cr0, {0} ; VBAR
+	.word	0xe590100c 	// ldr	r1, [r0, #12]
+	.word	0xee011f10 	// mcr	15, 0, r1, cr1, cr0, {0}  ; SCTLR
+	.word	0xf57ff06f	// isb
+	.word	0xe12fff1e 	// bx	lr		; return to FEL
+fel_stash_addr:
+	.word   0x00000000	// receives fel_stash addr, by AA64 code above
+ENDPROC(return_to_fel)
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
new file mode 100644
index 000000000..9c58f69db
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -0,0 +1,658 @@
+config ARCH_LS1012A
+	bool
+	select ARMV8_SET_SMPEN
+	select ARM_ERRATA_855873 if !TFABOOT
+	select FSL_LAYERSCAPE
+	select FSL_LSCH2
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
+	select SYS_FSL_DDR_BE
+	select SYS_FSL_MMDC
+	select SYS_FSL_ERRATUM_A010315
+	select SYS_FSL_ERRATUM_A009798
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A009008
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	imply PANIC_HANG
+
+config ARCH_LS1028A
+	bool
+	select ARMV8_SET_SMPEN
+	select FSL_LAYERSCAPE
+	select FSL_LSCH3
+	select NXP_LSCH3_2
+	select SYS_FSL_HAS_CCI400
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_HAS_DDR3
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select FSL_TZASC_1
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A008514 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009663 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+	select SYS_FSL_ERRATUM_A050382
+	select SYS_FSL_ERRATUM_A011334
+	select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
+	select RESV_RAM if GIC_V3_ITS
+	imply PANIC_HANG
+
+config ARCH_LS1043A
+	bool
+	select ARMV8_SET_SMPEN
+	select ARM_ERRATA_855873 if !TFABOOT
+	select FSL_LAYERSCAPE
+	select FSL_LSCH2
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_BE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_ERRATUM_A008850 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009660 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009663 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009798
+	select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+	select SYS_FSL_ERRATUM_A010315
+	select SYS_FSL_ERRATUM_A010539
+	select SYS_FSL_HAS_DDR3
+	select SYS_FSL_HAS_DDR4
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
+	imply CMD_PCI
+
+config ARCH_LS1046A
+	bool
+	select ARMV8_SET_SMPEN
+	select FSL_LAYERSCAPE
+	select FSL_LSCH2
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_BE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_ERRATUM_A008336 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008850 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009798
+	select SYS_FSL_ERRATUM_A009801
+	select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+	select SYS_FSL_ERRATUM_A010165 if !TFABOOT
+	select SYS_FSL_ERRATUM_A010539
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_SRDS_2
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
+	imply SCSI
+	imply SCSI_AHCI
+
+config ARCH_LS1088A
+	bool
+	select ARMV8_SET_SMPEN
+	select ARM_ERRATA_855873 if !TFABOOT
+	select FSL_LAYERSCAPE
+	select FSL_LSCH3
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_EC1
+	select SYS_FSL_EC2
+	select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+	select SYS_FSL_ERRATUM_A010165 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008850 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_HAS_CCI400
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_HAS_RGMII
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select SYS_FSL_SRDS_1
+	select SYS_FSL_SRDS_2
+	select FSL_TZASC_1
+	select FSL_TZASC_400
+	select FSL_TZPC_BP147
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select SYS_I2C_MXC_I2C1 if !TFABOOT
+	select SYS_I2C_MXC_I2C2 if !TFABOOT
+	select SYS_I2C_MXC_I2C3 if !TFABOOT
+	select SYS_I2C_MXC_I2C4 if !TFABOOT
+	select RESV_RAM if GIC_V3_ITS
+	imply SCSI
+	imply PANIC_HANG
+
+config ARCH_LS2080A
+	bool
+	select ARMV8_SET_SMPEN
+	select ARM_ERRATA_826974
+	select ARM_ERRATA_828024
+	select ARM_ERRATA_829520
+	select ARM_ERRATA_833471
+	select FSL_LAYERSCAPE
+	select FSL_LSCH3
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_HAS_CCN504
+	select SYS_FSL_HAS_DP_DDR
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select SYS_FSL_SRDS_2
+	select FSL_TZASC_1
+	select FSL_TZASC_2
+	select FSL_TZASC_400
+	select FSL_TZPC_BP147
+	select SYS_FSL_ERRATUM_A008336 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008514 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008585
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009635
+	select SYS_FSL_ERRATUM_A009663 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009798
+	select SYS_FSL_ERRATUM_A009801
+	select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+	select SYS_FSL_ERRATUM_A010165 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009203
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select SYS_I2C_MXC_I2C1 if !TFABOOT
+	select SYS_I2C_MXC_I2C2 if !TFABOOT
+	select SYS_I2C_MXC_I2C3 if !TFABOOT
+	select SYS_I2C_MXC_I2C4 if !TFABOOT
+	select RESV_RAM if GIC_V3_ITS
+	imply DISTRO_DEFAULTS
+	imply PANIC_HANG
+
+config ARCH_LX2162A
+	bool
+	select ARMV8_SET_SMPEN
+	select FSL_LSCH3
+	select NXP_LSCH3_2
+	select SYS_HAS_SERDES
+	select SYS_FSL_SRDS_1
+	select SYS_FSL_SRDS_2
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_EC1
+	select SYS_FSL_EC2
+	select SYS_FSL_ERRATUM_A050204
+	select SYS_FSL_ERRATUM_A011334
+	select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
+	select SYS_FSL_HAS_RGMII
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_HAS_CCN508
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select RESV_RAM if GIC_V3_ITS
+	imply DISTRO_DEFAULTS
+	imply PANIC_HANG
+	imply SCSI
+	imply SCSI_AHCI
+
+config ARCH_LX2160A
+	bool
+	select ARMV8_SET_SMPEN
+	select FSL_LSCH3
+	select NXP_LSCH3_2
+	select SYS_HAS_SERDES
+	select SYS_FSL_SRDS_1
+	select SYS_FSL_SRDS_2
+	select SYS_NXP_SRDS_3
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_EC1
+	select SYS_FSL_EC2
+	select SYS_FSL_ERRATUM_A050204
+	select SYS_FSL_ERRATUM_A011334
+	select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
+	select SYS_FSL_HAS_RGMII
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_HAS_CCN508
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+	select SYS_I2C_MXC
+	select RESV_RAM if GIC_V3_ITS
+	imply DISTRO_DEFAULTS
+	imply PANIC_HANG
+	imply SCSI
+	imply SCSI_AHCI
+
+config FSL_LSCH2
+	bool
+	select SYS_FSL_HAS_CCI400
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_BE
+
+config FSL_LSCH3
+	select ARCH_MISC_INIT
+	bool
+
+config NXP_LSCH3_2
+	bool
+
+menu "Layerscape architecture"
+	depends on FSL_LSCH2 || FSL_LSCH3
+
+config FSL_LAYERSCAPE
+	bool
+
+config HAS_FEATURE_GIC64K_ALIGN
+	bool
+	default y if ARCH_LS1043A
+
+config HAS_FEATURE_ENHANCED_MSI
+	bool
+	default y if ARCH_LS1043A
+
+menu "Layerscape PPA"
+config FSL_LS_PPA
+	bool "FSL Layerscape PPA firmware support"
+	depends on !ARMV8_PSCI
+	select ARMV8_SEC_FIRMWARE_SUPPORT
+	select SEC_FIRMWARE_ARMV8_PSCI
+	select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
+	help
+	  The FSL Primary Protected Application (PPA) is a software component
+	  which is loaded during boot stage, and then remains resident in RAM
+	  and runs in the TrustZone after boot.
+	  Say y to enable it.
+
+config SPL_FSL_LS_PPA
+	bool "FSL Layerscape PPA firmware support for SPL build"
+	depends on !ARMV8_PSCI
+	select SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+	select SEC_FIRMWARE_ARMV8_PSCI
+	select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
+	help
+	  The FSL Primary Protected Application (PPA) is a software component
+	  which is loaded during boot stage, and then remains resident in RAM
+	  and runs in the TrustZone after boot. This is to load PPA during SPL
+	  stage instead of the RAM version of U-Boot. Once PPA is initialized,
+	  the rest of U-Boot (including RAM version) runs at EL2.
+choice
+	prompt "FSL Layerscape PPA firmware loading-media select"
+	depends on FSL_LS_PPA
+	default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
+	default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
+	default SYS_LS_PPA_FW_IN_XIP
+
+config SYS_LS_PPA_FW_IN_XIP
+	bool "XIP"
+	help
+	  Say Y here if the PPA firmware locate at XIP flash, such
+	  as NOR or QSPI flash.
+
+config SYS_LS_PPA_FW_IN_MMC
+	bool "eMMC or SD Card"
+	help
+	  Say Y here if the PPA firmware locate at eMMC/SD card.
+
+config SYS_LS_PPA_FW_IN_NAND
+	bool "NAND"
+	help
+	  Say Y here if the PPA firmware locate at NAND flash.
+
+endchoice
+
+config LS_PPA_ESBC_HDR_SIZE
+	hex "Length of PPA ESBC header"
+	depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
+	default 0x2000
+	help
+	  Length (in bytes) of PPA ESBC header to be copied from MMC/SD or
+	  NAND to memory to validate PPA image.
+
+endmenu
+
+config SYS_FSL_ERRATUM_A008997
+	bool "Workaround for USB PHY erratum A008997"
+
+config SYS_FSL_ERRATUM_A009007
+	bool
+	help
+	  Workaround for USB PHY erratum A009007
+
+config SYS_FSL_ERRATUM_A009008
+	bool "Workaround for USB PHY erratum A009008"
+
+config SYS_FSL_ERRATUM_A009798
+	bool "Workaround for USB PHY erratum A009798"
+
+config SYS_FSL_ERRATUM_A050204
+	bool "Workaround for USB PHY erratum A050204"
+	help
+	  USB3.0 Receiver needs to enable fixed equalization
+	  for each of PHY instances in an SOC. This is similar
+	  to erratum A-009007, but this one is for LX2160A and LX2162A,
+	  and the register value is different.
+
+config SYS_FSL_ERRATUM_A010315
+	bool "Workaround for PCIe erratum A010315"
+
+config SYS_FSL_ERRATUM_A010539
+	bool "Workaround for PIN MUX erratum A010539"
+
+config MAX_CPUS
+	int "Maximum number of CPUs permitted for Layerscape"
+	default 2 if ARCH_LS1028A
+	default 4 if ARCH_LS1043A
+	default 4 if ARCH_LS1046A
+	default 16 if ARCH_LS2080A
+	default 8 if ARCH_LS1088A
+	default 16 if ARCH_LX2160A
+	default 16 if ARCH_LX2162A
+	default 1
+	help
+	  Set this number to the maximum number of possible CPUs in the SoC.
+	  SoCs may have multiple clusters with each cluster may have multiple
+	  ports. If some ports are reserved but higher ports are used for
+	  cores, count the reserved ports. This will allocate enough memory
+	  in spin table to properly handle all cores.
+
+config EMC2305
+	bool "Fan controller"
+	help
+	 Enable the EMC2305 fan controller for configuration of fan
+	 speed.
+
+config NXP_ESBC
+	bool "NXP_ESBC"
+	help
+		Enable Freescale Secure Boot feature
+
+config QSPI_AHB_INIT
+	bool "Init the QSPI AHB bus"
+	help
+	  The default setting for QSPI AHB bus just support 3bytes addressing.
+	  But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
+	  bus for those flashes to support the full QSPI flash size.
+
+config FSPI_AHB_EN_4BYTE
+	bool "Enable 4-byte Fast Read command for AHB mode"
+	default n
+	help
+	  The default setting for FlexSPI AHB bus just supports 3-byte addressing.
+	  But some FlexSPI flash sizes are up to 64MBytes.
+	  This flag enables fast read command for AHB mode and modifies required
+	  LUT to support full FlexSPI flash.
+
+config SYS_CCI400_OFFSET
+	hex "Offset for CCI400 base"
+	depends on SYS_FSL_HAS_CCI400
+	default 0x3090000 if ARCH_LS1088A || ARCH_LS1028A
+	default 0x180000 if FSL_LSCH2
+	help
+	  Offset for CCI400 base
+	  CCI400 base addr = CCSRBAR + CCI400_OFFSET
+
+config SYS_FSL_IFC_BANK_COUNT
+	int "Maximum banks of Integrated flash controller"
+	depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
+	default 4 if ARCH_LS1043A
+	default 4 if ARCH_LS1046A
+	default 8 if ARCH_LS2080A || ARCH_LS1088A
+
+config SYS_FSL_HAS_CCI400
+	bool
+
+config SYS_FSL_HAS_CCN504
+	bool
+
+config SYS_FSL_HAS_CCN508
+	bool
+
+config SYS_FSL_HAS_DP_DDR
+	bool
+
+config SYS_FSL_SRDS_1
+	bool
+
+config SYS_FSL_SRDS_2
+	bool
+
+config SYS_NXP_SRDS_3
+	bool
+
+config SYS_HAS_SERDES
+	bool
+
+config FSL_TZASC_1
+	bool
+
+config FSL_TZASC_2
+	bool
+
+config FSL_TZASC_400
+	bool
+
+config FSL_TZPC_BP147
+	bool
+endmenu
+
+menu "Layerscape clock tree configuration"
+	depends on FSL_LSCH2 || FSL_LSCH3
+
+config SYS_FSL_CLK
+	bool "Enable clock tree initialization"
+	default y
+
+config CLUSTER_CLK_FREQ
+	int "Reference clock of core cluster"
+	depends on ARCH_LS1012A
+	default 100000000
+	help
+	  This number is the reference clock frequency of core PLL.
+	  For most platforms, the core PLL and Platform PLL have the same
+	  reference clock, but for some platforms, LS1012A for instance,
+	  they are provided sepatately.
+
+config SYS_FSL_PCLK_DIV
+	int "Platform clock divider"
+	default 1 if ARCH_LS1028A
+	default 1 if ARCH_LS1043A
+	default 1 if ARCH_LS1046A
+	default 1 if ARCH_LS1088A
+	default 2
+	help
+	  This is the divider that is used to derive Platform clock from
+	  Platform PLL, in another word:
+		Platform_clk = Platform_PLL_freq / this_divider
+
+config SYS_FSL_DSPI_CLK_DIV
+	int "DSPI clock divider"
+	default 1 if ARCH_LS1043A
+	default 2
+	help
+	  This is the divider that is used to derive DSPI clock from Platform
+	  clock, in another word DSPI_clk = Platform_clk / this_divider.
+
+config SYS_FSL_DUART_CLK_DIV
+	int "DUART clock divider"
+	default 1 if ARCH_LS1043A
+	default 4 if ARCH_LX2160A
+	default 4 if ARCH_LX2162A
+	default 2
+	help
+	  This is the divider that is used to derive DUART clock from Platform
+	  clock, in another word DUART_clk = Platform_clk / this_divider.
+
+config SYS_FSL_I2C_CLK_DIV
+	int "I2C clock divider"
+	default 1 if ARCH_LS1043A
+	default 4 if ARCH_LS1012A
+	default 4 if ARCH_LS1028A
+	default 8 if ARCH_LX2160A
+	default 8 if ARCH_LX2162A
+	default 8 if ARCH_LS1088A
+	default 2
+	help
+	  This is the divider that is used to derive I2C clock from Platform
+	  clock, in another word I2C_clk = Platform_clk / this_divider.
+
+config SYS_FSL_IFC_CLK_DIV
+	int "IFC clock divider"
+	default 1 if ARCH_LS1043A
+	default 4 if ARCH_LS1012A
+	default 4 if ARCH_LS1028A
+	default 8 if ARCH_LX2160A
+	default 8 if ARCH_LX2162A
+	default 8 if ARCH_LS1088A
+	default 2
+	help
+	  This is the divider that is used to derive IFC clock from Platform
+	  clock, in another word IFC_clk = Platform_clk / this_divider.
+
+config SYS_FSL_LPUART_CLK_DIV
+	int "LPUART clock divider"
+	default 1 if ARCH_LS1043A
+	default 2
+	help
+	  This is the divider that is used to derive LPUART clock from Platform
+	  clock, in another word LPUART_clk = Platform_clk / this_divider.
+
+config SYS_FSL_SDHC_CLK_DIV
+	int "SDHC clock divider"
+	default 1 if ARCH_LS1043A
+	default 1 if ARCH_LS1012A
+	default 2
+	help
+	  This is the divider that is used to derive SDHC clock from Platform
+	  clock, in another word SDHC_clk = Platform_clk / this_divider.
+
+config SYS_FSL_QMAN_CLK_DIV
+	int "QMAN clock divider"
+	default 1 if ARCH_LS1043A
+	default 2
+	help
+	  This is the divider that is used to derive QMAN clock from Platform
+	  clock, in another word QMAN_clk = Platform_clk / this_divider.
+endmenu
+
+config RESV_RAM
+	bool
+	help
+	  Reserve memory from the top, tracked by gd->arch.resv_ram. This
+	  reserved RAM can be used by special driver that resides in memory
+	  after U-Boot exits. It's up to implementation to allocate and allow
+	  access to this reserved memory. For example, the reserved RAM can
+	  be at the high end of physical memory. The reserve RAM may be
+	  excluded from memory bank(s) passed to OS, or marked as reserved.
+
+config SYS_FSL_EC1
+	bool
+	help
+	  Ethernet controller 1, this is connected to
+	  MAC17 for LX2160A and LX2162A or to MAC3 for other SoCs
+	  Provides DPAA2 capabilities
+
+config SYS_FSL_EC2
+	bool
+	help
+	  Ethernet controller 2, this is connected to
+	  MAC18 for LX2160A and LX2162A or to MAC4 for other SoCs
+	  Provides DPAA2 capabilities
+
+config SYS_FSL_ERRATUM_A008336
+	bool
+
+config SYS_FSL_ERRATUM_A008514
+	bool
+
+config SYS_FSL_ERRATUM_A008585
+	bool
+
+config SYS_FSL_ERRATUM_A008850
+	bool
+
+config SYS_FSL_ERRATUM_A009203
+	bool
+
+config SYS_FSL_ERRATUM_A009635
+	bool
+
+config SYS_FSL_ERRATUM_A009660
+	bool
+
+config SYS_FSL_ERRATUM_A050382
+	bool
+
+config SYS_FSL_HAS_RGMII
+	bool
+	depends on SYS_FSL_EC1 || SYS_FSL_EC2
+
+config SPL_LDSCRIPT
+	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+
+config HAS_FSL_XHCI_USB
+	bool
+	default y if ARCH_LS1043A || ARCH_LS1046A
+	help
+	  For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
+	  pins, select it when the pins are assigned to USB.
+
+config SYS_FSL_BOOTROM_BASE
+	hex
+	depends on FSL_LSCH2
+	default 0
+
+config SYS_FSL_BOOTROM_SIZE
+	hex
+	depends on FSL_LSCH2
+	default 0x1000000
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/Makefile
new file mode 100644
index 000000000..598c36ee6
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright 2016-2018 NXP
+# Copyright 2014-2015, Freescale Semiconductor
+
+obj-y += cpu.o
+obj-y += lowlevel.o
+obj-y += soc.o
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_MP) += mp.o spintable.o
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
+endif
+obj-$(CONFIG_SPL) += spl.o
+obj-$(CONFIG_$(SPL_)FSL_LS_PPA) += ppa.o
+
+ifneq ($(CONFIG_FSL_LSCH3),)
+obj-y += fsl_lsch3_speed.o
+obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch3_serdes.o
+else
+ifneq ($(CONFIG_FSL_LSCH2),)
+obj-y += fsl_lsch2_speed.o
+obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o
+endif
+endif
+
+ifneq ($(CONFIG_ARCH_LX2160A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += lx2160a_serdes.o
+obj-y += icid.o lx2160_ids.o
+endif
+
+ifneq ($(CONFIG_ARCH_LX2162A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += lx2160a_serdes.o
+obj-y += icid.o lx2160_ids.o
+endif
+
+ifneq ($(CONFIG_ARCH_LS2080A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
+obj-y += icid.o ls2088_ids.o
+endif
+
+ifneq ($(CONFIG_ARCH_LS1043A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
+obj-$(CONFIG_ARMV8_PSCI) += ls1043a_psci.o
+obj-y += icid.o ls1043_ids.o
+endif
+
+ifneq ($(CONFIG_ARCH_LS1012A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls1012a_serdes.o
+endif
+
+ifneq ($(CONFIG_ARCH_LS1046A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
+obj-y += icid.o ls1046_ids.o
+endif
+
+ifneq ($(CONFIG_ARCH_LS1088A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o
+obj-y += icid.o ls1088_ids.o
+endif
+
+ifneq ($(CONFIG_ARCH_LS1028A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls1028a_serdes.o
+obj-y += icid.o ls1028_ids.o
+endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
new file mode 100644
index 000000000..d0103fc88
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -0,0 +1,1656 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017-2020 NXP
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <env.h>
+#include <fsl_ddr_sdram.h>
+#include <init.h>
+#include <hang.h>
+#include <log.h>
+#include <net.h>
+#include <vsprintf.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/ptrace.h>
+#include <linux/errno.h>
+#include <asm/system.h>
+#include <fm_eth.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/speed.h>
+#include <fsl_immap.h>
+#include <asm/arch/mp.h>
+#include <efi_loader.h>
+#include <fsl-mc/fsl_mc.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+#include <asm/armv8/sec_firmware.h>
+#ifdef CONFIG_SYS_FSL_DDR
+#include <fsl_ddr.h>
+#endif
+#include <asm/arch/clock.h>
+#include <hwconfig.h>
+#include <fsl_qbman.h>
+
+#ifdef CONFIG_TFABOOT
+#include <env_internal.h>
+#ifdef CONFIG_CHAIN_OF_TRUST
+#include <fsl_validate.h>
+#endif
+#endif
+#include <linux/mii.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct cpu_type cpu_type_list[] = {
+	CPU_TYPE_ENTRY(LS2080A, LS2080A, 8),
+	CPU_TYPE_ENTRY(LS2085A, LS2085A, 8),
+	CPU_TYPE_ENTRY(LS2045A, LS2045A, 4),
+	CPU_TYPE_ENTRY(LS2088A, LS2088A, 8),
+	CPU_TYPE_ENTRY(LS2084A, LS2084A, 8),
+	CPU_TYPE_ENTRY(LS2048A, LS2048A, 4),
+	CPU_TYPE_ENTRY(LS2044A, LS2044A, 4),
+	CPU_TYPE_ENTRY(LS2081A, LS2081A, 8),
+	CPU_TYPE_ENTRY(LS2041A, LS2041A, 4),
+	CPU_TYPE_ENTRY(LS1043A, LS1043A, 4),
+	CPU_TYPE_ENTRY(LS1043A, LS1043A_P23, 4),
+	CPU_TYPE_ENTRY(LS1023A, LS1023A, 2),
+	CPU_TYPE_ENTRY(LS1023A, LS1023A_P23, 2),
+	CPU_TYPE_ENTRY(LS1046A, LS1046A, 4),
+	CPU_TYPE_ENTRY(LS1026A, LS1026A, 2),
+	CPU_TYPE_ENTRY(LS2040A, LS2040A, 4),
+	CPU_TYPE_ENTRY(LS1012A, LS1012A, 1),
+	CPU_TYPE_ENTRY(LS1017A, LS1017A, 1),
+	CPU_TYPE_ENTRY(LS1018A, LS1018A, 1),
+	CPU_TYPE_ENTRY(LS1027A, LS1027A, 2),
+	CPU_TYPE_ENTRY(LS1028A, LS1028A, 2),
+	CPU_TYPE_ENTRY(LS1088A, LS1088A, 8),
+	CPU_TYPE_ENTRY(LS1084A, LS1084A, 8),
+	CPU_TYPE_ENTRY(LS1048A, LS1048A, 4),
+	CPU_TYPE_ENTRY(LS1044A, LS1044A, 4),
+	CPU_TYPE_ENTRY(LX2160A, LX2160A, 16),
+	CPU_TYPE_ENTRY(LX2120A, LX2120A, 12),
+	CPU_TYPE_ENTRY(LX2080A, LX2080A, 8),
+	CPU_TYPE_ENTRY(LX2162A, LX2162A, 16),
+	CPU_TYPE_ENTRY(LX2122A, LX2122A, 12),
+	CPU_TYPE_ENTRY(LX2082A, LX2082A, 8),
+};
+
+#define EARLY_PGTABLE_SIZE 0x5000
+static struct mm_region early_map[] = {
+#ifdef CONFIG_FSL_LSCH3
+	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
+	  CONFIG_SYS_FSL_CCSR_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
+	  SYS_FSL_OCRAM_SPACE_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
+	},
+	{ CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1,
+	  CONFIG_SYS_FSL_QSPI_SIZE1,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE},
+#ifdef CONFIG_FSL_IFC
+	/* For IFC Region #1, only the first 4MB is cache-enabled */
+	{ CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_BASE1,
+	  CONFIG_SYS_FSL_IFC_SIZE1_1,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
+	},
+	{ CONFIG_SYS_FSL_IFC_BASE1 + CONFIG_SYS_FSL_IFC_SIZE1_1,
+	  CONFIG_SYS_FSL_IFC_BASE1 + CONFIG_SYS_FSL_IFC_SIZE1_1,
+	  CONFIG_SYS_FSL_IFC_SIZE1 - CONFIG_SYS_FSL_IFC_SIZE1_1,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
+	},
+	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FSL_IFC_BASE1,
+	  CONFIG_SYS_FSL_IFC_SIZE1,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
+	},
+#endif
+	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
+	  CONFIG_SYS_FSL_DRAM_SIZE1,
+#if defined(CONFIG_TFABOOT) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+#else	/* Start with nGnRnE and PXN and UXN to prevent speculative access */
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
+#endif
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+#ifdef CONFIG_FSL_IFC
+	/* Map IFC region #2 up to CONFIG_SYS_FLASH_BASE for NAND boot */
+	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
+	  CONFIG_SYS_FLASH_BASE - CONFIG_SYS_FSL_IFC_BASE2,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
+	},
+#endif
+	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
+	  CONFIG_SYS_FSL_DCSR_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
+	  CONFIG_SYS_FSL_DRAM_SIZE2,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+#ifdef CONFIG_SYS_FSL_DRAM_BASE3
+	{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
+	  CONFIG_SYS_FSL_DRAM_SIZE3,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+#endif
+#elif defined(CONFIG_FSL_LSCH2)
+	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
+	  CONFIG_SYS_FSL_CCSR_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
+	  SYS_FSL_OCRAM_SPACE_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
+	},
+	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
+	  CONFIG_SYS_FSL_DCSR_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_QSPI_BASE, CONFIG_SYS_FSL_QSPI_BASE,
+	  CONFIG_SYS_FSL_QSPI_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
+	},
+#ifdef CONFIG_FSL_IFC
+	{ CONFIG_SYS_FSL_IFC_BASE, CONFIG_SYS_FSL_IFC_BASE,
+	  CONFIG_SYS_FSL_IFC_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
+	},
+#endif
+	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
+	  CONFIG_SYS_FSL_DRAM_SIZE1,
+#if defined(CONFIG_TFABOOT) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+#else	/* Start with nGnRnE and PXN and UXN to prevent speculative access */
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
+#endif
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
+	  CONFIG_SYS_FSL_DRAM_SIZE2,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+#endif
+	{},	/* list terminator */
+};
+
+static struct mm_region final_map[] = {
+#ifdef CONFIG_FSL_LSCH3
+	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
+	  CONFIG_SYS_FSL_CCSR_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
+	  SYS_FSL_OCRAM_SPACE_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
+	},
+	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
+	  CONFIG_SYS_FSL_DRAM_SIZE1,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+	{ CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1,
+	  CONFIG_SYS_FSL_QSPI_SIZE1,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2,
+	  CONFIG_SYS_FSL_QSPI_SIZE2,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#ifdef CONFIG_FSL_IFC
+	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
+	  CONFIG_SYS_FSL_IFC_SIZE2,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#endif
+	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
+	  CONFIG_SYS_FSL_DCSR_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_MC_BASE, CONFIG_SYS_FSL_MC_BASE,
+	  CONFIG_SYS_FSL_MC_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_NI_BASE, CONFIG_SYS_FSL_NI_BASE,
+	  CONFIG_SYS_FSL_NI_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	/* For QBMAN portal, only the first 64MB is cache-enabled */
+	{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
+	  CONFIG_SYS_FSL_QBMAN_SIZE_1,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN | PTE_BLOCK_NS
+	},
+	{ CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
+	  CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
+	  CONFIG_SYS_FSL_QBMAN_SIZE - CONFIG_SYS_FSL_QBMAN_SIZE_1,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_PCIE1_PHYS_ADDR, CONFIG_SYS_PCIE1_PHYS_ADDR,
+	  CONFIG_SYS_PCIE1_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_PCIE2_PHYS_ADDR, CONFIG_SYS_PCIE2_PHYS_ADDR,
+	  CONFIG_SYS_PCIE2_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
+	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
+	  CONFIG_SYS_PCIE3_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#endif
+#ifdef CONFIG_SYS_PCIE4_PHYS_ADDR
+	{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
+	  CONFIG_SYS_PCIE4_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#endif
+#ifdef SYS_PCIE5_PHYS_ADDR
+	{ SYS_PCIE5_PHYS_ADDR, SYS_PCIE5_PHYS_ADDR,
+	  SYS_PCIE5_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#endif
+#ifdef SYS_PCIE6_PHYS_ADDR
+	{ SYS_PCIE6_PHYS_ADDR, SYS_PCIE6_PHYS_ADDR,
+	  SYS_PCIE6_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#endif
+	{ CONFIG_SYS_FSL_WRIOP1_BASE, CONFIG_SYS_FSL_WRIOP1_BASE,
+	  CONFIG_SYS_FSL_WRIOP1_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_AIOP1_BASE, CONFIG_SYS_FSL_AIOP1_BASE,
+	  CONFIG_SYS_FSL_AIOP1_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_PEBUF_BASE, CONFIG_SYS_FSL_PEBUF_BASE,
+	  CONFIG_SYS_FSL_PEBUF_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
+	  CONFIG_SYS_FSL_DRAM_SIZE2,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+#ifdef CONFIG_SYS_FSL_DRAM_BASE3
+	{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
+	  CONFIG_SYS_FSL_DRAM_SIZE3,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+#endif
+#elif defined(CONFIG_FSL_LSCH2)
+	{ CONFIG_SYS_FSL_BOOTROM_BASE, CONFIG_SYS_FSL_BOOTROM_BASE,
+	  CONFIG_SYS_FSL_BOOTROM_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
+	  CONFIG_SYS_FSL_CCSR_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
+	  SYS_FSL_OCRAM_SPACE_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
+	},
+	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
+	  CONFIG_SYS_FSL_DCSR_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_QSPI_BASE, CONFIG_SYS_FSL_QSPI_BASE,
+	  CONFIG_SYS_FSL_QSPI_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#ifdef CONFIG_FSL_IFC
+	{ CONFIG_SYS_FSL_IFC_BASE, CONFIG_SYS_FSL_IFC_BASE,
+	  CONFIG_SYS_FSL_IFC_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
+	},
+#endif
+	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
+	  CONFIG_SYS_FSL_DRAM_SIZE1,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+	{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
+	  CONFIG_SYS_FSL_QBMAN_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
+	  CONFIG_SYS_FSL_DRAM_SIZE2,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+	{ CONFIG_SYS_PCIE1_PHYS_ADDR, CONFIG_SYS_PCIE1_PHYS_ADDR,
+	  CONFIG_SYS_PCIE1_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{ CONFIG_SYS_PCIE2_PHYS_ADDR, CONFIG_SYS_PCIE2_PHYS_ADDR,
+	  CONFIG_SYS_PCIE2_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
+	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
+	  CONFIG_SYS_PCIE3_PHYS_SIZE,
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+#endif
+	{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
+	  CONFIG_SYS_FSL_DRAM_SIZE3,
+	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
+	},
+#endif
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	{},	/* space holder for secure mem */
+#endif
+	{},
+};
+
+struct mm_region *mem_map = early_map;
+
+void cpu_name(char *name)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int i, svr, ver;
+
+	svr = gur_in32(&gur->svr);
+	ver = SVR_SOC_VER(svr);
+
+	for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
+		if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) {
+			strcpy(name, cpu_type_list[i].name);
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+			if (IS_C_PROCESSOR(svr))
+				strcat(name, "C");
+#endif
+
+			if (IS_E_PROCESSOR(svr))
+				strcat(name, "E");
+
+			sprintf(name + strlen(name), " Rev%d.%d",
+				SVR_MAJ(svr), SVR_MIN(svr));
+			break;
+		}
+
+	if (i == ARRAY_SIZE(cpu_type_list))
+		strcpy(name, "unknown");
+}
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+/*
+ * To start MMU before DDR is available, we create MMU table in SRAM.
+ * The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
+ * levels of translation tables here to cover 40-bit address space.
+ * We use 4KB granule size, with 40 bits physical address, T0SZ=24
+ * Address above EARLY_PGTABLE_SIZE (0x5000) is free for other purpose.
+ * Note, the debug print in cache_v8.c is not usable for debugging
+ * these early MMU tables because UART is not yet available.
+ */
+static inline void early_mmu_setup(void)
+{
+	unsigned int el = current_el();
+
+	/* global data is already setup, no allocation yet */
+	if (el == 3)
+		gd->arch.tlb_addr = CONFIG_SYS_FSL_OCRAM_BASE;
+	else
+		gd->arch.tlb_addr = CONFIG_SYS_DDR_SDRAM_BASE;
+	gd->arch.tlb_fillptr = gd->arch.tlb_addr;
+	gd->arch.tlb_size = EARLY_PGTABLE_SIZE;
+
+	/* Create early page tables */
+	setup_pgtables();
+
+	/* point TTBR to the new table */
+	set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
+			  get_tcr(el, NULL, NULL) &
+			  ~(TCR_ORGN_MASK | TCR_IRGN_MASK),
+			  MEMORY_ATTRIBUTES);
+
+	set_sctlr(get_sctlr() | CR_M);
+}
+
+static void fix_pcie_mmu_map(void)
+{
+#ifdef CONFIG_ARCH_LS2080A
+	unsigned int i;
+	u32 svr, ver;
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	svr = gur_in32(&gur->svr);
+	ver = SVR_SOC_VER(svr);
+
+	/* Fix PCIE base and size for LS2088A */
+	if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) ||
+	    (ver == SVR_LS2048A) || (ver == SVR_LS2044A) ||
+	    (ver == SVR_LS2081A) || (ver == SVR_LS2041A)) {
+		for (i = 0; i < ARRAY_SIZE(final_map); i++) {
+			switch (final_map[i].phys) {
+			case CONFIG_SYS_PCIE1_PHYS_ADDR:
+				final_map[i].phys = 0x2000000000ULL;
+				final_map[i].virt = 0x2000000000ULL;
+				final_map[i].size = 0x800000000ULL;
+				break;
+			case CONFIG_SYS_PCIE2_PHYS_ADDR:
+				final_map[i].phys = 0x2800000000ULL;
+				final_map[i].virt = 0x2800000000ULL;
+				final_map[i].size = 0x800000000ULL;
+				break;
+#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
+			case CONFIG_SYS_PCIE3_PHYS_ADDR:
+				final_map[i].phys = 0x3000000000ULL;
+				final_map[i].virt = 0x3000000000ULL;
+				final_map[i].size = 0x800000000ULL;
+				break;
+#endif
+#ifdef CONFIG_SYS_PCIE4_PHYS_ADDR
+			case CONFIG_SYS_PCIE4_PHYS_ADDR:
+				final_map[i].phys = 0x3800000000ULL;
+				final_map[i].virt = 0x3800000000ULL;
+				final_map[i].size = 0x800000000ULL;
+				break;
+#endif
+			default:
+				break;
+			}
+		}
+	}
+#endif
+}
+
+/*
+ * The final tables look similar to early tables, but different in detail.
+ * These tables are in DRAM. Sub tables are added to enable cache for
+ * QBMan and OCRAM.
+ *
+ * Put the MMU table in secure memory if gd->arch.secure_ram is valid.
+ * OCRAM will be not used for this purpose so gd->arch.secure_ram can't be 0.
+ */
+static inline void final_mmu_setup(void)
+{
+	u64 tlb_addr_save = gd->arch.tlb_addr;
+	unsigned int el = current_el();
+	int index;
+
+	/* fix the final_map before filling in the block entries */
+	fix_pcie_mmu_map();
+
+	mem_map = final_map;
+
+	/* Update mapping for DDR to actual size */
+	for (index = 0; index < ARRAY_SIZE(final_map) - 2; index++) {
+		/*
+		 * Find the entry for DDR mapping and update the address and
+		 * size. Zero-sized mapping will be skipped when creating MMU
+		 * table.
+		 */
+		switch (final_map[index].virt) {
+		case CONFIG_SYS_FSL_DRAM_BASE1:
+			final_map[index].virt = gd->bd->bi_dram[0].start;
+			final_map[index].phys = gd->bd->bi_dram[0].start;
+			final_map[index].size = gd->bd->bi_dram[0].size;
+			break;
+#ifdef CONFIG_SYS_FSL_DRAM_BASE2
+		case CONFIG_SYS_FSL_DRAM_BASE2:
+#if (CONFIG_NR_DRAM_BANKS >= 2)
+			final_map[index].virt = gd->bd->bi_dram[1].start;
+			final_map[index].phys = gd->bd->bi_dram[1].start;
+			final_map[index].size = gd->bd->bi_dram[1].size;
+#else
+			final_map[index].size = 0;
+#endif
+		break;
+#endif
+#ifdef CONFIG_SYS_FSL_DRAM_BASE3
+		case CONFIG_SYS_FSL_DRAM_BASE3:
+#if (CONFIG_NR_DRAM_BANKS >= 3)
+			final_map[index].virt = gd->bd->bi_dram[2].start;
+			final_map[index].phys = gd->bd->bi_dram[2].start;
+			final_map[index].size = gd->bd->bi_dram[2].size;
+#else
+			final_map[index].size = 0;
+#endif
+		break;
+#endif
+		default:
+			break;
+		}
+	}
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
+		if (el == 3) {
+			/*
+			 * Only use gd->arch.secure_ram if the address is
+			 * recalculated. Align to 4KB for MMU table.
+			 */
+			/* put page tables in secure ram */
+			index = ARRAY_SIZE(final_map) - 2;
+			gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff;
+			final_map[index].virt = gd->arch.secure_ram & ~0x3;
+			final_map[index].phys = final_map[index].virt;
+			final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE;
+			final_map[index].attrs = PTE_BLOCK_OUTER_SHARE;
+			gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED;
+			tlb_addr_save = gd->arch.tlb_addr;
+		} else {
+			/* Use allocated (board_f.c) memory for TLB */
+			tlb_addr_save = gd->arch.tlb_allocated;
+			gd->arch.tlb_addr = tlb_addr_save;
+		}
+	}
+#endif
+
+	/* Reset the fill ptr */
+	gd->arch.tlb_fillptr = tlb_addr_save;
+
+	/* Create normal system page tables */
+	setup_pgtables();
+
+	/* Create emergency page tables */
+	gd->arch.tlb_addr = gd->arch.tlb_fillptr;
+	gd->arch.tlb_emerg = gd->arch.tlb_addr;
+	setup_pgtables();
+	gd->arch.tlb_addr = tlb_addr_save;
+
+	/* Disable cache and MMU */
+	dcache_disable();	/* TLBs are invalidated */
+	invalidate_icache_all();
+
+	/* point TTBR to the new table */
+	set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
+			  MEMORY_ATTRIBUTES);
+
+	set_sctlr(get_sctlr() | CR_M);
+}
+
+u64 get_page_table_size(void)
+{
+	return 0x10000;
+}
+
+int arch_cpu_init(void)
+{
+	/*
+	 * This function is called before U-Boot relocates itself to speed up
+	 * on system running. It is not necessary to run if performance is not
+	 * critical. Skip if MMU is already enabled by SPL or other means.
+	 */
+	if (get_sctlr() & CR_M)
+		return 0;
+
+	icache_enable();
+	__asm_invalidate_dcache_all();
+	__asm_invalidate_tlb_all();
+	early_mmu_setup();
+	set_sctlr(get_sctlr() | CR_C);
+	return 0;
+}
+
+void mmu_setup(void)
+{
+	final_mmu_setup();
+}
+
+/*
+ * This function is called from common/board_r.c.
+ * It recreates MMU table in main memory.
+ */
+void enable_caches(void)
+{
+	mmu_setup();
+	__asm_invalidate_tlb_all();
+	icache_enable();
+	dcache_enable();
+}
+#endif	/* !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+
+#ifdef CONFIG_TFABOOT
+enum boot_src __get_boot_src(u32 porsr1)
+{
+	enum boot_src src = BOOT_SOURCE_RESERVED;
+	u32 rcw_src = (porsr1 & RCW_SRC_MASK) >> RCW_SRC_BIT;
+#if !defined(CONFIG_NXP_LSCH3_2)
+	u32 val;
+#endif
+	debug("%s: rcw_src 0x%x\n", __func__, rcw_src);
+
+#if defined(CONFIG_FSL_LSCH3)
+#if defined(CONFIG_NXP_LSCH3_2)
+	switch (rcw_src) {
+	case RCW_SRC_SDHC1_VAL:
+		src = BOOT_SOURCE_SD_MMC;
+	break;
+	case RCW_SRC_SDHC2_VAL:
+		src = BOOT_SOURCE_SD_MMC2;
+	break;
+	case RCW_SRC_I2C1_VAL:
+		src = BOOT_SOURCE_I2C1_EXTENDED;
+	break;
+	case RCW_SRC_FLEXSPI_NAND2K_VAL:
+		src = BOOT_SOURCE_XSPI_NAND;
+	break;
+	case RCW_SRC_FLEXSPI_NAND4K_VAL:
+		src = BOOT_SOURCE_XSPI_NAND;
+	break;
+	case RCW_SRC_RESERVED_1_VAL:
+		src = BOOT_SOURCE_RESERVED;
+	break;
+	case RCW_SRC_FLEXSPI_NOR_24B:
+		src = BOOT_SOURCE_XSPI_NOR;
+	break;
+	default:
+		src = BOOT_SOURCE_RESERVED;
+	}
+#else
+	val = rcw_src & RCW_SRC_TYPE_MASK;
+	if (val == RCW_SRC_NOR_VAL) {
+		val = rcw_src & NOR_TYPE_MASK;
+
+		switch (val) {
+		case NOR_16B_VAL:
+		case NOR_32B_VAL:
+			src = BOOT_SOURCE_IFC_NOR;
+		break;
+		default:
+			src = BOOT_SOURCE_RESERVED;
+		}
+	} else {
+		/* RCW SRC Serial Flash */
+		val = rcw_src & RCW_SRC_SERIAL_MASK;
+		switch (val) {
+		case RCW_SRC_QSPI_VAL:
+		/* RCW SRC Serial NOR (QSPI) */
+			src = BOOT_SOURCE_QSPI_NOR;
+			break;
+		case RCW_SRC_SD_CARD_VAL:
+		/* RCW SRC SD Card */
+			src = BOOT_SOURCE_SD_MMC;
+			break;
+		case RCW_SRC_EMMC_VAL:
+		/* RCW SRC EMMC */
+			src = BOOT_SOURCE_SD_MMC;
+			break;
+		case RCW_SRC_I2C1_VAL:
+		/* RCW SRC I2C1 Extended */
+			src = BOOT_SOURCE_I2C1_EXTENDED;
+			break;
+		default:
+			src = BOOT_SOURCE_RESERVED;
+		}
+	}
+#endif
+#elif defined(CONFIG_FSL_LSCH2)
+	/* RCW SRC NAND */
+	val = rcw_src & RCW_SRC_NAND_MASK;
+	if (val == RCW_SRC_NAND_VAL) {
+		val = rcw_src & NAND_RESERVED_MASK;
+		if (val != NAND_RESERVED_1 && val != NAND_RESERVED_2)
+			src = BOOT_SOURCE_IFC_NAND;
+
+	} else {
+		/* RCW SRC NOR */
+		val = rcw_src & RCW_SRC_NOR_MASK;
+		if (val == NOR_8B_VAL || val == NOR_16B_VAL) {
+			src = BOOT_SOURCE_IFC_NOR;
+		} else {
+			switch (rcw_src) {
+			case QSPI_VAL1:
+			case QSPI_VAL2:
+				src = BOOT_SOURCE_QSPI_NOR;
+				break;
+			case SD_VAL:
+				src = BOOT_SOURCE_SD_MMC;
+				break;
+			default:
+				src = BOOT_SOURCE_RESERVED;
+			}
+		}
+	}
+#endif
+
+	if (CONFIG_IS_ENABLED(SYS_FSL_ERRATUM_A010539) && !rcw_src)
+		src = BOOT_SOURCE_QSPI_NOR;
+
+	debug("%s: src 0x%x\n", __func__, src);
+	return src;
+}
+
+enum boot_src get_boot_src(void)
+{
+	struct pt_regs regs;
+	u32 porsr1 = 0;
+
+#if defined(CONFIG_FSL_LSCH3)
+	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+#elif defined(CONFIG_FSL_LSCH2)
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#endif
+
+	if (current_el() == 2) {
+		regs.regs[0] = SIP_SVC_RCW;
+
+		smc_call(&regs);
+		if (!regs.regs[0])
+			porsr1 = regs.regs[1];
+	}
+
+	if (current_el() == 3 || !porsr1) {
+#ifdef CONFIG_FSL_LSCH3
+		porsr1 = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
+#elif defined(CONFIG_FSL_LSCH2)
+		porsr1 = in_be32(&gur->porsr1);
+#endif
+	}
+
+	debug("%s: porsr1 0x%x\n", __func__, porsr1);
+
+	return __get_boot_src(porsr1);
+}
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+int mmc_get_env_dev(void)
+{
+	enum boot_src src = get_boot_src();
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
+
+	switch (src) {
+	case BOOT_SOURCE_SD_MMC:
+		dev = 0;
+		break;
+	case BOOT_SOURCE_SD_MMC2:
+		dev = 1;
+		break;
+	default:
+		break;
+	}
+
+	return dev;
+}
+#endif
+
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	enum boot_src src = get_boot_src();
+	enum env_location env_loc = ENVL_NOWHERE;
+
+	if (prio)
+		return ENVL_UNKNOWN;
+
+#ifdef	CONFIG_ENV_IS_NOWHERE
+	return env_loc;
+#endif
+
+	switch (src) {
+	case BOOT_SOURCE_IFC_NOR:
+		env_loc = ENVL_FLASH;
+		break;
+	case BOOT_SOURCE_QSPI_NOR:
+		/* FALLTHROUGH */
+	case BOOT_SOURCE_XSPI_NOR:
+		env_loc = ENVL_SPI_FLASH;
+		break;
+	case BOOT_SOURCE_IFC_NAND:
+		/* FALLTHROUGH */
+	case BOOT_SOURCE_QSPI_NAND:
+		/* FALLTHROUGH */
+	case BOOT_SOURCE_XSPI_NAND:
+		env_loc = ENVL_NAND;
+		break;
+	case BOOT_SOURCE_SD_MMC:
+		/* FALLTHROUGH */
+	case BOOT_SOURCE_SD_MMC2:
+		env_loc =  ENVL_MMC;
+		break;
+	case BOOT_SOURCE_I2C1_EXTENDED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	return env_loc;
+}
+#endif	/* CONFIG_TFABOOT */
+
+u32 initiator_type(u32 cluster, int init_id)
+{
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
+	u32 type = 0;
+
+	type = gur_in32(&gur->tp_ityp[idx]);
+	if (type & TP_ITYP_AV)
+		return type;
+
+	return 0;
+}
+
+u32 cpu_pos_mask(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int i = 0;
+	u32 cluster, type, mask = 0;
+
+	do {
+		int j;
+
+		cluster = gur_in32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = initiator_type(cluster, j);
+			if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM))
+				mask |= 1 << (i * TP_INIT_PER_CLUSTER + j);
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) == 0x0);
+
+	return mask;
+}
+
+u32 cpu_mask(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster, type, mask = 0;
+
+	do {
+		int j;
+
+		cluster = gur_in32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = initiator_type(cluster, j);
+			if (type) {
+				if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+					mask |= 1 << count;
+				count++;
+			}
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) == 0x0);
+
+	return mask;
+}
+
+/*
+ * Return the number of cores on this SOC.
+ */
+int cpu_numcores(void)
+{
+	return hweight32(cpu_mask());
+}
+
+int fsl_qoriq_core_to_cluster(unsigned int core)
+{
+	struct ccsr_gur __iomem *gur =
+		(void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster;
+
+	do {
+		int j;
+
+		cluster = gur_in32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			if (initiator_type(cluster, j)) {
+				if (count == core)
+					return i;
+				count++;
+			}
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) == 0x0);
+
+	return -1;      /* cannot identify the cluster */
+}
+
+u32 fsl_qoriq_core_to_type(unsigned int core)
+{
+	struct ccsr_gur __iomem *gur =
+		(void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster, type;
+
+	do {
+		int j;
+
+		cluster = gur_in32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = initiator_type(cluster, j);
+			if (type) {
+				if (count == core)
+					return type;
+				count++;
+			}
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) == 0x0);
+
+	return -1;      /* cannot identify the cluster */
+}
+
+#ifndef CONFIG_FSL_LSCH3
+uint get_svr(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	return gur_in32(&gur->svr);
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct sys_info sysinfo;
+	char buf[32];
+	unsigned int i, core;
+	u32 type, rcw, svr = gur_in32(&gur->svr);
+
+	puts("SoC: ");
+
+	cpu_name(buf);
+	printf(" %s (0x%x)\n", buf, svr);
+	memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
+	get_sys_info(&sysinfo);
+	puts("Clock Configuration:");
+	for_each_cpu(i, core, cpu_numcores(), cpu_mask()) {
+		if (!(i % 3))
+			puts("\n       ");
+		type = TP_ITYP_VER(fsl_qoriq_core_to_type(core));
+		printf("CPU%d(%s):%-4s MHz  ", core,
+		       type == TY_ITYP_VER_A7 ? "A7 " :
+		       (type == TY_ITYP_VER_A53 ? "A53" :
+		       (type == TY_ITYP_VER_A57 ? "A57" :
+		       (type == TY_ITYP_VER_A72 ? "A72" : "   "))),
+		       strmhz(buf, sysinfo.freq_processor[core]));
+	}
+	/* Display platform clock as Bus frequency. */
+	printf("\n       Bus:      %-4s MHz  ",
+	       strmhz(buf, sysinfo.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV));
+	printf("DDR:      %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
+#ifdef CONFIG_SYS_DPAA_FMAN
+	printf("  FMAN:     %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
+#endif
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	if (soc_has_dp_ddr()) {
+		printf("     DP-DDR:   %-4s MT/s",
+		       strmhz(buf, sysinfo.freq_ddrbus2));
+	}
+#endif
+	puts("\n");
+
+	/*
+	 * Display the RCW, so that no one gets confused as to what RCW
+	 * we're actually using for this boot.
+	 */
+	puts("Reset Configuration Word (RCW):");
+	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+		rcw = gur_in32(&gur->rcwsr[i]);
+		if ((i % 4) == 0)
+			printf("\n       %08x:", i * 4);
+		printf(" %08x", rcw);
+	}
+	puts("\n");
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+int cpu_mmc_init(struct bd_info *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int cpu_eth_init(struct bd_info *bis)
+{
+	int error = 0;
+
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+	error = fsl_mc_ldpaa_init(bis);
+#endif
+#ifdef CONFIG_FMAN_ENET
+	fm_standard_init(bis);
+#endif
+	return error;
+}
+
+int check_psci(void)
+{
+	unsigned int psci_ver;
+
+	psci_ver = sec_firmware_support_psci_version();
+	if (psci_ver == PSCI_INVALID_VER)
+		return 1;
+
+	return 0;
+}
+
+static void config_core_prefetch(void)
+{
+	char *buf = NULL;
+	char buffer[HWCONFIG_BUFFER_SIZE];
+	const char *prefetch_arg = NULL;
+	size_t arglen;
+	unsigned int mask;
+	struct pt_regs regs;
+
+	if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
+		buf = buffer;
+	else
+		return;
+
+	prefetch_arg = hwconfig_subarg_f("core_prefetch", "disable",
+					 &arglen, buf);
+
+	if (prefetch_arg) {
+		mask = simple_strtoul(prefetch_arg, NULL, 0) & 0xff;
+		if (mask & 0x1) {
+			printf("Core0 prefetch can't be disabled\n");
+			return;
+		}
+
+#define SIP_PREFETCH_DISABLE_64 0xC200FF13
+		regs.regs[0] = SIP_PREFETCH_DISABLE_64;
+		regs.regs[1] = mask;
+		smc_call(&regs);
+
+		if (regs.regs[0])
+			printf("Prefetch disable config failed for mask ");
+		else
+			printf("Prefetch disable config passed for mask ");
+		printf("0x%x\n", mask);
+	}
+}
+
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+__weak void set_ecam_icids(void)
+{
+}
+#endif
+
+int arch_early_init_r(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+	u32 svr_dev_id;
+	/*
+	 * erratum A009635 is valid only for LS2080A SoC and
+	 * its personalitiesi
+	 */
+	svr_dev_id = get_svr();
+	if (IS_SVR_DEV(svr_dev_id, SVR_DEV(SVR_LS2080A)))
+		erratum_a009635();
+#endif
+#if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR)
+	erratum_a009942_check_cpo();
+#endif
+	if (check_psci()) {
+		debug("PSCI: PSCI does not exist.\n");
+
+		/* if PSCI does not exist, boot secondary cores here */
+		if (fsl_layerscape_wake_seconday_cores())
+			printf("Did not wake secondary cores\n");
+	}
+
+	config_core_prefetch();
+
+#ifdef CONFIG_SYS_HAS_SERDES
+	fsl_serdes_init();
+#endif
+#ifdef CONFIG_SYS_FSL_HAS_RGMII
+	/* some dpmacs in armv8a based freescale layerscape SOCs can be
+	 * configured via both serdes(sgmii, xfi, xlaui etc) bits and via
+	 * EC*_PMUX(rgmii) bits in RCW.
+	 * e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from
+	 * serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits
+	 * Now if a dpmac is enabled as RGMII through ECx_PMUX then it takes
+	 * precedence over SerDes protocol. i.e. in LX2160A if we select serdes
+	 * protocol that configures dpmac17 as SGMII and set the EC1_PMUX as
+	 * RGMII, then the dpmac is RGMII and not SGMII.
+	 *
+	 * Therefore, even thought fsl_rgmii_init is after fsl_serdes_init
+	 * function of SOC, the dpmac will be enabled as RGMII even if it was
+	 * also enabled before as SGMII. If ECx_PMUX is not configured for
+	 * RGMII, DPMAC will remain configured as SGMII from fsl_serdes_init().
+	 */
+	fsl_rgmii_init();
+#endif
+#ifdef CONFIG_FMAN_ENET
+#ifndef CONFIG_DM_ETH
+	fman_enet_init();
+#endif
+#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_qbman_portals();
+#endif
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+	set_ecam_icids();
+#endif
+	return 0;
+}
+
+int timer_init(void)
+{
+	u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
+#ifdef CONFIG_FSL_LSCH3
+	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
+#endif
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+	defined(CONFIG_ARCH_LS1028A)
+	u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
+	u32 svr_dev_id;
+#endif
+#ifdef COUNTER_FREQUENCY_REAL
+	unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
+
+	/* Update with accurate clock frequency */
+	if (current_el() == 3)
+		asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory");
+#endif
+
+#ifdef CONFIG_FSL_LSCH3
+	/* Enable timebase for all clusters.
+	 * It is safe to do so even some clusters are not enabled.
+	 */
+	out_le32(cltbenr, 0xf);
+#endif
+
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+	defined(CONFIG_ARCH_LS1028A)
+	/*
+	 * In certain Layerscape SoCs, the clock for each core's
+	 * has an enable bit in the PMU Physical Core Time Base Enable
+	 * Register (PCTBENR), which allows the watchdog to operate.
+	 */
+	setbits_le32(pctbenr, 0xff);
+	/*
+	 * For LS2080A SoC and its personalities, timer controller
+	 * offset is different
+	 */
+	svr_dev_id = get_svr();
+	if (IS_SVR_DEV(svr_dev_id, SVR_DEV(SVR_LS2080A)))
+		cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR;
+
+#endif
+
+	/* Enable clock for timer
+	 * This is a global setting.
+	 */
+	out_le32(cntcr, 0x1);
+
+	return 0;
+}
+
+__efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
+
+void __efi_runtime reset_cpu(void)
+{
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+	/* clear the RST_REQ_MSK and SW_RST_REQ */
+	out_le32(rstcr, 0x0);
+
+	/* initiate the sw reset request */
+	out_le32(rstcr, 0x1);
+#else
+	u32 val;
+
+	/* Raise RESET_REQ_B */
+	val = scfg_in32(rstcr);
+	val |= 0x02;
+	scfg_out32(rstcr, val);
+#endif
+}
+
+#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_PSCI_RESET)
+
+void __efi_runtime EFIAPI efi_reset_system(
+		       enum efi_reset_type reset_type,
+		       efi_status_t reset_status,
+		       unsigned long data_size, void *reset_data)
+{
+	switch (reset_type) {
+	case EFI_RESET_COLD:
+	case EFI_RESET_WARM:
+	case EFI_RESET_PLATFORM_SPECIFIC:
+		reset_cpu();
+		break;
+	case EFI_RESET_SHUTDOWN:
+		/* Nothing we can do */
+		break;
+	}
+
+	while (1) { }
+}
+
+efi_status_t efi_reset_system_init(void)
+{
+	return efi_add_runtime_mmio(&rstcr, sizeof(*rstcr));
+}
+
+#endif
+
+/*
+ * Calculate reserved memory with given memory bank
+ * Return aligned memory size on success
+ * Return (ram_size + needed size) for failure
+ */
+phys_size_t board_reserve_ram_top(phys_size_t ram_size)
+{
+	phys_size_t ram_top = ram_size;
+
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+	ram_top = mc_get_dram_block_size();
+	if (ram_top > ram_size)
+		return ram_size + ram_top;
+
+	ram_top = ram_size - ram_top;
+	/* The start address of MC reserved memory needs to be aligned. */
+	ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
+#endif
+
+	return ram_size - ram_top;
+}
+
+phys_size_t get_effective_memsize(void)
+{
+	phys_size_t ea_size, rem = 0;
+
+	/*
+	 * For ARMv8 SoCs, DDR memory is split into two or three regions. The
+	 * first region is 2GB space at 0x8000_0000. Secure memory needs to
+	 * allocated from first region. If the memory extends to  the second
+	 * region (or the third region if applicable), Management Complex (MC)
+	 * memory should be put into the highest region, i.e. the end of DDR
+	 * memory. CONFIG_MAX_MEM_MAPPED is set to the size of first region so
+	 * U-Boot doesn't relocate itself into higher address. Should DDR be
+	 * configured to skip the first region, this function needs to be
+	 * adjusted.
+	 */
+	if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
+		ea_size = CONFIG_MAX_MEM_MAPPED;
+		rem = gd->ram_size - ea_size;
+	} else {
+		ea_size = gd->ram_size;
+	}
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	/* Check if we have enough space for secure memory */
+	if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE)
+		ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+	else
+		printf("Error: No enough space for secure memory.\n");
+#endif
+	/* Check if we have enough memory for MC */
+	if (rem < board_reserve_ram_top(rem)) {
+		/* Not enough memory in high region to reserve */
+		if (ea_size > board_reserve_ram_top(ea_size))
+			ea_size -= board_reserve_ram_top(ea_size);
+		else
+			printf("Error: No enough space for reserved memory.\n");
+	}
+
+	return ea_size;
+}
+
+#ifdef CONFIG_TFABOOT
+phys_size_t tfa_get_dram_size(void)
+{
+	struct pt_regs regs;
+	phys_size_t dram_size = 0;
+
+	regs.regs[0] = SMC_DRAM_BANK_INFO;
+	regs.regs[1] = -1;
+
+	smc_call(&regs);
+	if (regs.regs[0])
+		return 0;
+
+	dram_size = regs.regs[1];
+	return dram_size;
+}
+
+static int tfa_dram_init_banksize(void)
+{
+	int i = 0, ret = 0;
+	struct pt_regs regs;
+	phys_size_t dram_size = tfa_get_dram_size();
+
+	debug("dram_size %llx\n", dram_size);
+
+	if (!dram_size)
+		return -EINVAL;
+
+	do {
+		regs.regs[0] = SMC_DRAM_BANK_INFO;
+		regs.regs[1] = i;
+
+		smc_call(&regs);
+		if (regs.regs[0]) {
+			ret = -EINVAL;
+			break;
+		}
+
+		debug("bank[%d]: start %lx, size %lx\n", i, regs.regs[1],
+		      regs.regs[2]);
+		gd->bd->bi_dram[i].start = regs.regs[1];
+		gd->bd->bi_dram[i].size = regs.regs[2];
+
+		dram_size -= gd->bd->bi_dram[i].size;
+
+		i++;
+	} while (dram_size);
+
+	if (i > 0)
+		ret = 0;
+
+#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD)
+	/* Assign memory for MC */
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+	if (gd->bd->bi_dram[2].size >=
+	    board_reserve_ram_top(gd->bd->bi_dram[2].size)) {
+		gd->arch.resv_ram = gd->bd->bi_dram[2].start +
+			    gd->bd->bi_dram[2].size -
+			    board_reserve_ram_top(gd->bd->bi_dram[2].size);
+	} else
+#endif
+	{
+		if (gd->bd->bi_dram[1].size >=
+		    board_reserve_ram_top(gd->bd->bi_dram[1].size)) {
+			gd->arch.resv_ram = gd->bd->bi_dram[1].start +
+				gd->bd->bi_dram[1].size -
+				board_reserve_ram_top(gd->bd->bi_dram[1].size);
+		} else if (gd->bd->bi_dram[0].size >
+			   board_reserve_ram_top(gd->bd->bi_dram[0].size)) {
+			gd->arch.resv_ram = gd->bd->bi_dram[0].start +
+				gd->bd->bi_dram[0].size -
+				board_reserve_ram_top(gd->bd->bi_dram[0].size);
+		}
+	}
+#endif	/* CONFIG_RESV_RAM */
+
+	return ret;
+}
+#endif
+
+int dram_init_banksize(void)
+{
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+	phys_size_t dp_ddr_size;
+#endif
+
+#ifdef CONFIG_TFABOOT
+	if (!tfa_dram_init_banksize())
+		return 0;
+#endif
+	/*
+	 * gd->ram_size has the total size of DDR memory, less reserved secure
+	 * memory. The DDR extends from low region to high region(s) presuming
+	 * no hole is created with DDR configuration. gd->arch.secure_ram tracks
+	 * the location of secure memory. gd->arch.resv_ram tracks the location
+	 * of reserved memory for Management Complex (MC). Because gd->ram_size
+	 * is reduced by this function if secure memory is reserved, checking
+	 * gd->arch.secure_ram should be done to avoid running it repeatedly.
+	 */
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
+		debug("No need to run again, skip %s\n", __func__);
+
+		return 0;
+	}
+#endif
+
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+		gd->bd->bi_dram[1].size = gd->ram_size -
+					  CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+		if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) {
+			gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE;
+			gd->bd->bi_dram[2].size = gd->bd->bi_dram[1].size -
+						  CONFIG_SYS_DDR_BLOCK2_SIZE;
+			gd->bd->bi_dram[1].size = CONFIG_SYS_DDR_BLOCK2_SIZE;
+		}
+#endif
+	} else {
+		gd->bd->bi_dram[0].size = gd->ram_size;
+	}
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	if (gd->bd->bi_dram[0].size >
+				CONFIG_SYS_MEM_RESERVE_SECURE) {
+		gd->bd->bi_dram[0].size -=
+				CONFIG_SYS_MEM_RESERVE_SECURE;
+		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+				      gd->bd->bi_dram[0].size;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+	}
+#endif	/* CONFIG_SYS_MEM_RESERVE_SECURE */
+
+#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD)
+	/* Assign memory for MC */
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+	if (gd->bd->bi_dram[2].size >=
+	    board_reserve_ram_top(gd->bd->bi_dram[2].size)) {
+		gd->arch.resv_ram = gd->bd->bi_dram[2].start +
+			    gd->bd->bi_dram[2].size -
+			    board_reserve_ram_top(gd->bd->bi_dram[2].size);
+	} else
+#endif
+	{
+		if (gd->bd->bi_dram[1].size >=
+		    board_reserve_ram_top(gd->bd->bi_dram[1].size)) {
+			gd->arch.resv_ram = gd->bd->bi_dram[1].start +
+				gd->bd->bi_dram[1].size -
+				board_reserve_ram_top(gd->bd->bi_dram[1].size);
+		} else if (gd->bd->bi_dram[0].size >
+			   board_reserve_ram_top(gd->bd->bi_dram[0].size)) {
+			gd->arch.resv_ram = gd->bd->bi_dram[0].start +
+				gd->bd->bi_dram[0].size -
+				board_reserve_ram_top(gd->bd->bi_dram[0].size);
+		}
+	}
+#endif	/* CONFIG_RESV_RAM */
+
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#error "This SoC shouldn't have DP DDR"
+#endif
+	if (soc_has_dp_ddr()) {
+		/* initialize DP-DDR here */
+		puts("DP-DDR:  ");
+		/*
+		 * DDR controller use 0 as the base address for binding.
+		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+		 */
+		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+					  CONFIG_DP_DDR_CTRL,
+					  CONFIG_DP_DDR_NUM_CTRLS,
+					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
+					  NULL, NULL, NULL);
+		if (dp_ddr_size) {
+			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+			gd->bd->bi_dram[2].size = dp_ddr_size;
+		} else {
+			puts("Not detected");
+		}
+	}
+#endif
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	debug("%s is called. gd->ram_size is reduced to %lu\n",
+	      __func__, (ulong)gd->ram_size);
+#endif
+
+	return 0;
+}
+
+#if CONFIG_IS_ENABLED(EFI_LOADER)
+void efi_add_known_memory(void)
+{
+	int i;
+	phys_addr_t ram_start;
+	phys_size_t ram_size;
+
+	/* Add RAM */
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#error "This SoC shouldn't have DP DDR"
+#endif
+		if (i == 2)
+			continue;	/* skip DP-DDR */
+#endif
+		ram_start = gd->bd->bi_dram[i].start;
+		ram_size = gd->bd->bi_dram[i].size;
+#ifdef CONFIG_RESV_RAM
+		if (gd->arch.resv_ram >= ram_start &&
+		    gd->arch.resv_ram < ram_start + ram_size)
+			ram_size = gd->arch.resv_ram - ram_start;
+#endif
+		efi_add_memory_map(ram_start, ram_size,
+				   EFI_CONVENTIONAL_MEMORY);
+	}
+}
+#endif
+
+/*
+ * Before DDR size is known, early MMU table have DDR mapped as device memory
+ * to avoid speculative access. To relocate U-Boot to DDR, "normal memory"
+ * needs to be set for these mappings.
+ * If a special case configures DDR with holes in the mapping, the holes need
+ * to be marked as invalid. This is not implemented in this function.
+ */
+void update_early_mmu_table(void)
+{
+	if (!gd->arch.tlb_addr)
+		return;
+
+	if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
+		mmu_change_region_attr(
+					CONFIG_SYS_SDRAM_BASE,
+					gd->ram_size,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+	} else {
+		mmu_change_region_attr(
+					CONFIG_SYS_SDRAM_BASE,
+					CONFIG_SYS_DDR_BLOCK1_SIZE,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
+#error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
+#endif
+		if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
+		    CONFIG_SYS_DDR_BLOCK2_SIZE) {
+			mmu_change_region_attr(
+					CONFIG_SYS_DDR_BLOCK2_BASE,
+					CONFIG_SYS_DDR_BLOCK2_SIZE,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+			mmu_change_region_attr(
+					CONFIG_SYS_DDR_BLOCK3_BASE,
+					gd->ram_size -
+					CONFIG_SYS_DDR_BLOCK1_SIZE -
+					CONFIG_SYS_DDR_BLOCK2_SIZE,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+		} else
+#endif
+		{
+			mmu_change_region_attr(
+					CONFIG_SYS_DDR_BLOCK2_BASE,
+					gd->ram_size -
+					CONFIG_SYS_DDR_BLOCK1_SIZE,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+		}
+	}
+}
+
+__weak int dram_init(void)
+{
+	fsl_initdram();
+#if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
+	defined(CONFIG_SPL_BUILD)
+	/* This will break-before-make MMU for DDR */
+	update_early_mmu_table();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_ARCH_MISC_INIT
+__weak int serdes_misc_init(void)
+{
+	return 0;
+}
+
+int arch_misc_init(void)
+{
+	serdes_misc_init();
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/cpu.h b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/cpu.h
new file mode 100644
index 000000000..45da95831
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/cpu.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014-2015, Freescale Semiconductor
+ */
+
+int fsl_qoriq_core_to_cluster(unsigned int core);
+u32 initiator_type(u32 cluster, int init_id);
+u32 cpu_mask(void);
+int check_psci(void);
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.core_prefetch b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.core_prefetch
new file mode 100644
index 000000000..85cf6abd6
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.core_prefetch
@@ -0,0 +1,20 @@
+Core instruction prefetch disable
+---------------------------------
+To disable instruction prefetch of core; hwconfig needs to be updated.
+for e.g.
+setenv hwconfig 'fsl_ddr:bank_intlv=auto;core_prefetch:disable=0x02'
+
+Here 0x02 can be replaced with any valid value except Mask[0] bit. It
+represents 64 bit mask. The 64-bit Mask has one bit for each core.
+Mask[0] = core0
+Mask[1] = core1
+Mask[2] = core2
+etc
+If the bit is set ('b1) in the mask, then prefetch is disabled for
+that core when it is released from reset.
+
+core0 prefetch should not be disabled i.e. Mask[0] should never be set.
+Setting Mask[0] may lead to undefined behavior.
+
+Once disabled, prefetch remains disabled until the next reset.
+There is no function to re-enable prefetch.
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
new file mode 100644
index 000000000..b3c6693a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
@@ -0,0 +1,150 @@
+Falcon boot option
+------------------
+Falcon boot is a short cut boot method for SD/eMMC targets. It skips loading the
+RAM version U-Boot. Instead, it loads FIT image and boot directly to Linux.
+CONFIG_SPL_OS_BOOT enables falcon boot. CONFIG_SPL_LOAD_FIT enables the FIT
+image support (also need CONFIG_SPL_OF_LIBFDT, CONFIG_SPL_FIT and optionally
+CONFIG_SPL_GZIP).
+
+To enable falcon boot, a hook function spl_start_uboot() returns 0 to indicate
+booting U-Boot is not the first choice. The kernel FIT image needs to be put
+at CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. SPL mmc driver reads the header to
+determine if this is a FIT image. If true, FIT image components are parsed and
+copied or decompressed (if applicable) to their destinations. If FIT image is
+not found, normal U-Boot flow will follow.
+
+An important part of falcon boot is to prepare the device tree. A normal U-Boot
+does FDT fixups when booting Linux. For falcon boot, Linux boots directly from
+SPL, skipping the normal U-Boot. The device tree has to be prepared in advance.
+A command "spl export" should be called under the normal RAM version U-Boot.
+It is equivalent to go through "bootm" step-by-step until device tree fixup is
+done. The device tree in memory is the one needed for falcon boot. Falcon boot
+flow suggests to save this image to SD/eMMC at the location pointed by macro
+CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, with maximum size specified by macro
+CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS. However, when FIT image is used for
+Linux, the device tree stored in FIT image overwrites the memory loaded by spl
+driver from these sectors. We could change this loading order to favor the
+stored sectors. But when secure boot is enabled, these sectors are used for
+signature header and needs to be loaded before the FIT image. So it is important
+to understand the device tree in FIT image should be the one actually used, or
+leave it absent to favor the stored sectors. It is easier to deploy the FIT
+image with embedded static device tree to multiple boards.
+
+Macro CONFIG_SYS_SPL_ARGS_ADDR serves two purposes. One is the pointer to load
+the stored sectors to. Normally this is the static device tree. The second
+purpose is the memory location of signature header for secure boot. After the
+FIT image is loaded into memory, it is validated against the signature header
+before individual components are extracted (and optionally decompressed) into
+their final memory locations, respectively. After the validation, the header
+is no longer used. The static device tree is copied into this location. So
+this macro is passed as the location of device tree when booting Linux.
+
+Steps to prepare static device tree
+-----------------------------------
+To prepare the static device tree for Layerscape boards, it is important to
+understand the fixups in U-Boot. Memory size and location, as well as reserved
+memory blocks are added/updated. Ethernet MAC addressed are updated. FMan
+microcode (if used) is embedded in the device tree. Kernel command line and
+initrd information are embedded. Others including CPU status, boot method,
+Ethernet port status, etc. are also updated.
+
+Following normal booting process, all variables are set, all images are loaded
+before "bootm" command would be issued to boot, run command
+
+spl export fdt <address>
+
+where the address is the location of FIT image. U-Boot goes through the booting
+process as if "bootm start", "bootm loados", "bootm ramdisk"... commands but
+stops before "bootm go". There we have the fixed-up device tree in memory.
+We can check the device tree header by these commands
+
+fdt addr <fdt address>
+fdt header
+
+Where the fdt address is the device tree in memory. It is printed by U-Boot.
+It is useful to know the exact size. One way to extract this static device
+tree is to save it to eMMC/SD using command in U-Boot, and extract under Linux
+with these commands, repectively
+
+mmc write <address> <sector> <sectors>
+dd if=/dev/mmcblk0 of=<filename> bs=512 skip=<sector> count=<sectors>
+
+Note, U-Boot takes values as hexadecimals while Linux takes them as decimals by
+default. If using NAND or other storage, the commands are slightly different.
+When we have the static device tree image, we can re-make the FIT image with
+it. It is important to specify the load addresses in FIT image for every
+components. Otherwise U-Boot cannot load them correctly.
+
+Generate FIT image with static device tree
+------------------------------------------
+Example:
+
+/dts-v1/;
+
+/ {
+	description = "Image file for the LS1043A Linux Kernel";
+	#address-cells = <1>;
+
+	images {
+		kernel {
+			description = "ARM64 Linux kernel";
+			data = /incbin/("./arch/arm64/boot/Image.gz");
+			type = "kernel";
+			arch = "arm64";
+			os = "linux";
+			compression = "gzip";
+			load = <0x80080000>;
+			entry = <0x80080000>;
+		};
+		fdt-1 {
+			description = "Flattened Device Tree blob";
+			data = /incbin/("./fsl-ls1043ardb-static.dtb");
+			type = "flat_dt";
+			arch = "arm64";
+			compression = "none";
+			load = <0x90000000>;
+		};
+		ramdisk {
+			description = "LS1043 Ramdisk";
+                        data = /incbin/("./rootfs.cpio.gz");
+			type = "ramdisk";
+			arch = "arm64";
+			os = "linux";
+			compression = "none";
+			load = <0xa0000000>;
+		};
+	};
+
+	configurations {
+		default = "config-1";
+		config-1 {
+			description = "Boot Linux kernel";
+			kernel = "kernel";
+			fdt = "fdt-1";
+			ramdisk = "ramdisk";
+			loadables = "fdt", "ramdisk";
+		};
+	};
+};
+
+The "loadables" is not optional. It tells SPL which images to load into memory.
+
+Falcon mode with QSPI boot
+--------------------------
+To use falcon mode with QSPI boot, SPL needs to be enabled. Similar to SD or
+NAND boot, a RAM version full feature U-Boot is needed. Unlike SD or NAND boot,
+SPL with QSPI doesn't need to combine SPL image with RAM version image. Two
+separated images are used, u-boot-spl.pbl and u-boot.img. The former is SPL
+image with RCW and PBI commands to load the SPL payload into On-Chip RAM. The
+latter is RAM version U-Boot in FIT format (or legacy format if FIT is not
+used).
+
+Other things to consider
+-----------------------
+Falcon boot skips a lot of initialization in U-Boot. If Linux expects the
+hardware to be initialized by U-Boot, the related code should be ported to SPL
+build. For example, if Linux expect Ethernet PHY to be initialized in U-Boot
+(which is not a common case), the PHY initialization has to be included in
+falcon boot. This increases the SPL image size and should be handled carefully.
+If Linux has PHY driver enabled, it still depends on the correct MDIO bus setup
+in U-Boot. Normal U-Boot sets the MDC ratio to generate a proper clock signal.
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
new file mode 100644
index 000000000..d7f7b9f11
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
@@ -0,0 +1,20 @@
+#
+# Copyright 2015 Freescale Semiconductor
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+Freescale LayerScape with Chassis Generation 2
+
+This architecture supports Freescale ARMv8 SoCs with Chassis generation 2,
+for example LS1043A.
+
+Watchdog support Overview
+-------------------
+Support watchdog driver for LSCH2. The driver is disabled in default.
+You can enable it by setting CONFIG_IMX_WATCHDOG.
+Use following config to set watchdog timeout, if this config is not defined,
+the default timeout value is 128s which is the maximum. Set 10 seconds for
+example:
+Set CONFIG_WATCHDOG_RESET_DISABLE to disable reset watchdog, so that the
+watchdog will not be fed in u-boot.
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
new file mode 100644
index 000000000..6c98d99d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
@@ -0,0 +1,400 @@
+#
+# Copyright 2014-2015 Freescale Semiconductor
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+Freescale LayerScape with Chassis Generation 3
+
+This architecture supports Freescale ARMv8 SoCs with Chassis generation 3,
+for example LS2080A.
+
+DDR Layout
+============
+Entire DDR region splits into two regions.
+ - Region 1 is at address 0x8000_0000 to 0xffff_ffff.
+ - Region 2 is at 0x80_8000_0000 to the top of total memory,
+   for example 16GB, 0x83_ffff_ffff.
+
+All DDR memory is marked as cache-enabled.
+
+When MC and Debug server is enabled, they carve 512MB away from the high
+end of DDR. For example, if the total DDR is 16GB, it shrinks to 15.5GB
+with MC and Debug server enabled. Linux only sees 15.5GB.
+
+The reserved 512MB layout looks like
+
+   +---------------+ <-- top/end of memory
+   |    256MB      |  debug server
+   +---------------+
+   |    256MB      |  MC
+   +---------------+
+   |     ...       |
+
+MC requires the memory to be aligned with 512MB, so even debug server is
+not enabled, 512MB is reserved, not 256MB.
+
+Flash Layout
+============
+
+(1) A typical layout of various images (including Linux and other firmware images)
+   is shown below considering a 32MB NOR flash device present on most
+   pre-silicon platforms (simulator and emulator):
+
+	-------------------------
+	| 	FIT Image	|
+	| (linux + DTB + RFS)	|
+	------------------------- ----> 0x0120_0000
+	| 	Debug Server FW |
+	------------------------- ----> 0x00C0_0000
+	|	AIOP FW 	|
+	------------------------- ----> 0x0070_0000
+	|	MC FW 		|
+	------------------------- ----> 0x006C_0000
+	| 	MC DPL Blob 	|
+	------------------------- ----> 0x0020_0000
+	| 	BootLoader + Env|
+	------------------------- ----> 0x0000_1000
+	|	PBI 		|
+	------------------------- ----> 0x0000_0080
+	|	RCW 		|
+	------------------------- ----> 0x0000_0000
+
+	32-MB NOR flash layout for pre-silicon platforms (simulator and emulator)
+
+(2) A typical layout of various images (including Linux and other firmware images)
+    is shown below considering a 128MB NOR flash device present on QDS and RDB
+    boards:
+	----------------------------------------- ----> 0x5_8800_0000 ---
+	|	.. Unused .. (7M)		|			|
+	----------------------------------------- ----> 0x5_8790_0000	|
+	| FIT Image (linux + DTB + RFS)	(40M)	|			|
+	----------------------------------------- ----> 0x5_8510_0000	|
+	|	PHY firmware (2M)	 	|			|
+	----------------------------------------- ----> 0x5_84F0_0000	| 64K
+	|	Debug Server FW (2M)		|			| Alt
+	----------------------------------------- ----> 0x5_84D0_0000	| Bank
+	|	AIOP FW (4M)			|			|
+	----------------------------------------- ----> 0x5_8490_0000 (vbank4)
+	|	MC DPC Blob (1M) 		|			|
+	----------------------------------------- ----> 0x5_8480_0000	|
+	|	MC DPL Blob (1M)		|			|
+	----------------------------------------- ----> 0x5_8470_0000	|
+	| 	MC FW (4M)			|			|
+	----------------------------------------- ----> 0x5_8430_0000	|
+	|	BootLoader Environment (1M) 	|			|
+	----------------------------------------- ----> 0x5_8420_0000	|
+	|	BootLoader (1M)			|			|
+	----------------------------------------- ----> 0x5_8410_0000	|
+	|	RCW and PBI (1M) 		|			|
+	----------------------------------------- ----> 0x5_8400_0000 ---
+	|	.. Unused .. (7M)		|			|
+	----------------------------------------- ----> 0x5_8390_0000	|
+	| FIT Image (linux + DTB + RFS)	(40M)	|			|
+	----------------------------------------- ----> 0x5_8110_0000	|
+	|	PHY firmware (2M)	 	|			|
+	----------------------------------------- ----> 0x5_80F0_0000	| 64K
+	|	Debug Server FW (2M)		|			| Bank
+	----------------------------------------- ----> 0x5_80D0_0000	|
+	|	AIOP FW (4M)			|			|
+	----------------------------------------- ----> 0x5_8090_0000 (vbank0)
+	|	MC DPC Blob (1M) 		|			|
+	----------------------------------------- ----> 0x5_8080_0000	|
+	|	MC DPL Blob (1M)		|			|
+	----------------------------------------- ----> 0x5_8070_0000	|
+	| 	MC FW (4M)			|			|
+	----------------------------------------- ----> 0x5_8030_0000	|
+	|	BootLoader Environment (1M) 	|			|
+	----------------------------------------- ----> 0x5_8020_0000	|
+	|	BootLoader (1M)			|			|
+	----------------------------------------- ----> 0x5_8010_0000	|
+	|	RCW and PBI (1M) 		|			|
+	----------------------------------------- ----> 0x5_8000_0000 ---
+
+	128-MB NOR flash layout for QDS and RDB boards
+
+Environment Variables
+=====================
+mcboottimeout:	MC boot timeout in milliseconds. If this variable is not defined
+		the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
+
+mcmemsize:	MC DRAM block size in hex. If this variable is not defined, the value
+		CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
+
+mcinitcmd:	This environment variable is defined to initiate MC and DPL deployment
+		from the location where it is stored(NOR, NAND, SD, SATA, USB)during
+		u-boot booting.If this variable is not defined then MC_BOOT_ENV_VAR
+		will be null and MC will not be booted and DPL will not be applied
+		during U-boot booting.However the MC, DPC and DPL can be applied from
+		console independently.
+		The variable needs to be set from the console once and then on
+		rebooting the parameters set in the variable will automatically be
+		executed. The commmand is demostrated taking an example of mc boot
+		using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash:
+
+		cp.b 0xa0000000 0x580300000 $filesize
+		cp.b 0x80000000 0x580800000 $filesize
+		cp.b 0x90000000 0x580700000 $filesize
+
+		setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000'
+
+		If only linux is to be booted then the mcinitcmd environment should be set as
+
+		setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000'
+
+		Here the addresses 0xa0000000, 0x80000000, 0x80000000 are of DDR to where
+		MC binary, DPC binary and DPL binary are stored and 0x580300000, 0x580800000
+		and 0x580700000 are addresses in NOR where these are copied. It is to be
+		noted that these addresses in 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000'
+		can be replaced with the addresses of DDR to
+		which these will be copied in case of these binaries being stored in other
+		devices like SATA, USB, NAND, SD etc.
+
+Booting from NAND
+-------------------
+Booting from NAND requires two images, RCW and u-boot-with-spl.bin.
+The difference between NAND boot RCW image and NOR boot image is the PBI
+command sequence. Below is one example for PBI commands for LS2085AQDS which
+uses NAND device with 2KB/page, block size 128KB.
+
+1) CCSR 4-byte write to 0x00e00404, data=0x00000000
+2) CCSR 4-byte write to 0x00e00400, data=0x1800a000
+The above two commands set bootloc register to 0x00000000_1800a000 where
+the u-boot code will be running in OCRAM.
+
+3) Block Copy: SRC=0x0107, SRC_ADDR=0x00020000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00014000
+This command copies u-boot image from NAND device into OCRAM. The values need
+to adjust accordingly.
+
+SRC		should match the cfg_rcw_src, the reset config pins. It depends
+		on the NAND device. See reference manual for cfg_rcw_src.
+SRC_ADDR	is the offset of u-boot-with-spl.bin image in NAND device. In
+		the example above, 128KB. For easy maintenance, we put it at
+		the beginning of next block from RCW.
+DEST_ADDR	is fixed at 0x1800a000, matching bootloc set above.
+BLOCK_SIZE	is the size to be copied by PBI.
+
+RCW image should be written to the beginning of NAND device. Example of using
+u-boot command
+
+nand write <rcw image in memory> 0 <size of rcw image>
+
+To form the NAND image, build u-boot with NAND config, for example,
+ls2080aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
+The u-boot image should be written to match SRC_ADDR, in above example 0x20000.
+
+nand write <u-boot image in memory> 200000 <size of u-boot image>
+
+With these two images in NAND device, the board can boot from NAND.
+
+Another example for LS2085ARDB boards,
+
+1) CCSR 4-byte write to 0x00e00404, data=0x00000000
+2) CCSR 4-byte write to 0x00e00400, data=0x1800a000
+3) Block Copy: SRC=0x0119, SRC_ADDR=0x00080000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00014000
+
+nand write <rcw image in memory> 0 <size of rcw image>
+nand write <u-boot image in memory> 80000 <size of u-boot image>
+
+Notice the difference from QDS is SRC, SRC_ADDR and the offset of u-boot image
+to match board NAND device with 4KB/page, block size 512KB.
+
+Note, LS2088A and LS1088A don't support booting from NAND.
+
+Booting from SD/eMMC
+-------------------
+Booting from SD/eMMC requires two images, RCW and u-boot-with-spl.bin.
+The difference between SD boot RCW image and QSPI-NOR boot image is the
+PBI command sequence. Below is one example for PBI commands for RDB
+and QDS which uses SD device with block size 512. Block location can be
+calculated by dividing offset with block size.
+
+1) Block Copy: SRC=0x0040, SRC_ADDR=0x00100000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00016000
+
+This command copies u-boot image from SD device into OCRAM. The values
+need to adjust accordingly for SD/eMMC
+
+SRC		should match the cfg_rcw_src, the reset config pins.
+		The value for source(SRC) can be 0x0040 or 0x0041
+		depending upon SD or eMMC.
+SRC_ADDR	is the offset of u-boot-with-spl.bin image in SD device.
+		In the example above, 1MB. This is same as QSPI-NOR.
+DEST_ADDR	is configured at 0x1800a000, matching bootloc set above.
+BLOCK_SIZE	is the size to be copied by PBI.
+
+2) CCSR 4-byte write to 0x01e00404, data=0x00000000
+3) CCSR 4-byte write to 0x01e00400, data=0x1800a000
+The above two commands set bootloc register to 0x00000000_1800a000 where
+the u-boot code will be running in OCRAM.
+
+
+RCW image should be written at 8th block of device(SD/eMMC). Example of
+using u-boot command
+
+mmc erase 0x8 0x10
+mmc write <rcw image in memory> 0x8 <size of rcw in block count typical value=10>
+
+To form the SD-Boot image, build u-boot with SD config, for example,
+ls1088ardb_sdcard_qspi_defconfig. The image needed is u-boot-with-spl.bin.
+The u-boot image should be written to match SRC_ADDR, in above example
+offset 0x100000 in other work it means block location 0x800
+
+mmc erase 0x800 0x1800
+mmc write <u-boot image in memory> 0x800 <size of u-boot image in block count>
+
+With these two images in SD/eMMC device, the board can boot from SD/eMMC.
+
+MMU Translation Tables
+======================
+
+(1) Early MMU Tables:
+
+     Level 0                   Level 1                   Level 2
+------------------        ------------------        ------------------
+| 0x00_0000_0000 | -----> | 0x00_0000_0000 | -----> | 0x00_0000_0000 |
+------------------        ------------------        ------------------
+| 0x80_0000_0000 | --|    | 0x00_4000_0000 |        | 0x00_0020_0000 |
+------------------   |    ------------------        ------------------
+|    invalid     |   |    | 0x00_8000_0000 |        | 0x00_0040_0000 |
+------------------   |    ------------------        ------------------
+                     |    | 0x00_c000_0000 |        | 0x00_0060_0000 |
+                     |    ------------------        ------------------
+                     |    | 0x01_0000_0000 |        | 0x00_0080_0000 |
+                     |    ------------------        ------------------
+                     |            ...                      ...
+                     |    ------------------
+                     |    | 0x05_8000_0000 |  --|
+                     |    ------------------    |
+                     |    | 0x05_c000_0000 |    |
+                     |    ------------------    |
+                     |            ...           |
+                     |    ------------------    |   ------------------
+                     |--> | 0x80_0000_0000 |    |-> | 0x00_3000_0000 |
+                          ------------------        ------------------
+                          | 0x80_4000_0000 |        | 0x00_3020_0000 |
+                          ------------------        ------------------
+                          | 0x80_8000_0000 |        | 0x00_3040_0000 |
+                          ------------------        ------------------
+                          | 0x80_c000_0000 |        | 0x00_3060_0000 |
+                          ------------------        ------------------
+                          | 0x81_0000_0000 |        | 0x00_3080_0000 |
+                          ------------------        ------------------
+			         ...	                   ...
+
+(2) Final MMU Tables:
+
+     Level 0                   Level 1                   Level 2
+------------------        ------------------        ------------------
+| 0x00_0000_0000 | -----> | 0x00_0000_0000 | -----> | 0x00_0000_0000 |
+------------------        ------------------        ------------------
+| 0x80_0000_0000 | --|    | 0x00_4000_0000 |        | 0x00_0020_0000 |
+------------------   |    ------------------        ------------------
+|    invalid     |   |    | 0x00_8000_0000 |        | 0x00_0040_0000 |
+------------------   |    ------------------        ------------------
+                     |    | 0x00_c000_0000 |        | 0x00_0060_0000 |
+                     |    ------------------        ------------------
+                     |    | 0x01_0000_0000 |        | 0x00_0080_0000 |
+                     |    ------------------        ------------------
+                     |            ...                      ...
+                     |    ------------------
+                     |    | 0x08_0000_0000 | --|
+                     |    ------------------   |
+                     |    | 0x08_4000_0000 |   |
+                     |    ------------------   |
+                     |            ...          |
+                     |    ------------------   |    ------------------
+                     |--> | 0x80_0000_0000 |   |--> | 0x08_0000_0000 |
+                          ------------------        ------------------
+                          | 0x80_4000_0000 |        | 0x08_0020_0000 |
+                          ------------------        ------------------
+                          | 0x80_8000_0000 |        | 0x08_0040_0000 |
+                          ------------------        ------------------
+                          | 0x80_c000_0000 |        | 0x08_0060_0000 |
+                          ------------------        ------------------
+                          | 0x81_0000_0000 |        | 0x08_0080_0000 |
+                          ------------------        ------------------
+			         ...	                   ...
+
+
+DPAA2 commands to manage Management Complex (MC)
+------------------------------------------------
+DPAA2 commands has been introduced to manage Management Complex
+(MC). These commands are used to start mc, aiop and apply DPL
+from u-boot command prompt.
+
+Please note Management complex Firmware(MC), DPL and DPC are no
+more deployed during u-boot boot-sequence.
+
+Commands:
+a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+c) fsl_mc start aiop <FW_addr> - Start AIOP
+
+How to use commands :-
+1. Command sequence for u-boot ethernet:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) DPMAC net-devices are now available for use
+
+   Example-
+	Assumption: MC firmware, DPL and DPC dtb is already programmed
+	on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> setenv ethact DPMAC1@xgmii
+	=> ping $serverip
+
+2. Command sequence for Linux boot:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+   c) No DPMAC net-devices are available for use in u-boot
+   d) boot Linux
+
+   Example-
+	Assumption: MC firmware, DPL and DPC dtb is already programmed
+	on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> setenv ethact DPMAC1@xgmii
+	=> tftp a0000000 kernel.itb
+	=> fsl_mc apply dpl 580700000
+	=> bootm a0000000
+
+3. Command sequence for AIOP boot:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) fsl_mc start aiop <FW_addr> - Start AIOP
+   c) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+   d) No DPMAC net-devices are availabe for use in u-boot
+  Please note actual AIOP start will happen during DPL parsing of
+  Management complex
+
+  Example-
+	Assumption: MC firmware, DPL, DPC dtb and AIOP firmware is already
+	programmed on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> fsl_mc start aiop 0x580900000
+	=> setenv ethact DPMAC1@xgmii
+	=> fsl_mc apply dpl 580700000
+
+Errata A009635
+---------------
+If the core runs at higher than x3 speed of the platform, there is
+possiblity about sev instruction to getting missed by other cores.
+This is because of SoC Run Control block may not able to sample
+the EVENTI(Sev) signals.
+
+Workaround: Configure Run Control and EPU to periodically send out EVENTI signals to
+wake up A57 cores
+
+Errata workaround uses Env variable "a009635_interval_val". It uses decimal
+value.
+- Default value of env variable is platform clock (MHz)
+
+- User can modify default value by updating the env variable
+  setenv a009635_interval_val 600; saveenv;
+  It configure platform clock as 600 MHz
+
+- Env variable as 0 signifies no workaround
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3_2 b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3_2
new file mode 100644
index 000000000..6d4bd0b80
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3_2
@@ -0,0 +1,27 @@
+#
+# Copyright 2018 NXP
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+NXP LayerScape with Chassis Generation 3.2
+
+This architecture supports NXP ARMv8 SoCs with Chassis generation 3.2
+for example LX2160A.
+
+This architecture is enhancement over Chassis Generation 3 with
+few differences mentioned below
+
+1)DDR Layout
+============
+Entire DDR region splits into three regions.
+ - Region 1 is at address 0x8000_0000 to 0xffff_ffff.
+ - Region 2 is at address 0x20_8000_0000 to 0x3f_ffff_ffff,
+ - Region 3 is at address 0x60_0000_0000 to the top of memory,
+   for example 140GB, 0x63_7fff_ffff.
+
+All DDR memory is marked as cache-enabled.
+
+2)IFC is removed
+
+3)Number of I2C controllers increased to 8
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra
new file mode 100644
index 000000000..43db4d8e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra
@@ -0,0 +1,67 @@
+#
+# Copyright 2020 NXP
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+Specifying extra IOMMU mappings for PCI controllers
+
+This feature can be enabled through the PCI_IOMMU_EXTRA_MAPPINGS Kconfig option.
+
+The "pci_iommu_extra" env var or "pci-iommu-extra" device tree property (to be
+used for example in more static scenarios such as hardwired PCI endpoints that
+get initialized later in the system setup) allows two things:
+ - for a SRIOV capable PCI EP identified by its B.D.F specify the maximum number
+   of VFs that will ever be created for it
+ - for hot-plug case, specify the B.D.F with which the device will show up on
+   the PCI bus
+
+The env var consists of a list of <bdf>,<action> pairs for a certain pci bus
+identified by its controller's base register address, as defined in the "reg"
+property in the device tree.
+
+pci_iommu_extra = pci@<addr1>,<bdf>,<action>,<bdf>,<action>,
+		  pci@<addr2>,<bdf>,<action>,<bdf>,<action>,...
+
+where:
+ <addr> is the base register address of the pci controller for which the
+        subsequent <bdf>,<action> pairs apply
+ <bdf> identifies to which B.D.F the action applies to
+ <action> can be:
+    - "vfs=<number>" to specify that for the PCI EP identified previously by
+      the <bdf> to include mappings for <number> of VFs.
+      The variant "noari_vfs=<number>" is available to disable taking ARI into
+      account.
+    - "hp" to specify that on this <bdf> there will be a hot-plugged device so
+      it needs a mapping
+The device tree property must be placed under the correct pci controller node
+and only the bdf and action pairs need to be specified, like this:
+
+pci-iommu-extra = "<bdf>,<action>,<bdf>,<action>,...";
+
+Note: the env var has priority over the device tree property.
+
+For example, given this configuration on bus 6:
+
+=> pci 6
+Scanning PCI devices on bus 6
+BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
+_____________________________________________________________
+06.00.00   0x8086     0x1572     Network controller      0x00
+06.00.01   0x8086     0x1572     Network controller      0x00
+
+The following u-boot env var will create iommu mappings for 3 VFs for each PF:
+
+=> setenv pci_iommu_extra pci@0x3800000,6.0.0,vfs=3,6.0.1,vfs=3
+
+For the device tree case, this would be specified like this:
+
+pci-iommu-extra = "6.0.0,vfs=3,6.0.1,vfs=3";
+
+To add an iommu mapping for a hot-plugged device, please see following example:
+
+=> setenv pci_iommu_extra pci@0x3800000,2.16.0,hp
+
+For the device tree case, this would be specified like this:
+
+pci-iommu-extra = "2.16.0,hp";
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi
new file mode 100644
index 000000000..de86f4b30
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi
@@ -0,0 +1,42 @@
+QSPI Boot source support Overview
+-------------------
+	1. LS1043A
+		LS1043AQDS
+	2. LS2080A
+		LS2080AQDS
+	3. LS1012A
+		LS1012AQDS
+		LS1012ARDB
+	4. LS1046A
+		LS1046AQDS
+		LS1046ARDB
+
+Booting from QSPI
+-------------------
+Booting from QSPI requires two images, RCW and u-boot-dtb.bin.
+The difference between QSPI boot RCW image and NOR boot image is the PBI
+command sequence for setting the boot location pointer. It's should point
+to the address for u-boot in QSPI flash.
+
+RCW image should be written to the beginning of QSPI flash device.
+Example of using u-boot command
+
+=> sf probe 0:0
+SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
+=> sf erase 0 +<size of rcw image>
+SF: 65536 bytes @ 0x0 Erased: OK
+=> sf write <rcw image in memory> 0 <size of rcw image>
+SF: 164 bytes @ 0x0 Written: OK
+
+To get the QSPI image, build u-boot with QSPI config, for example,
+<board_name>_qspi_defconfig. The image needed is u-boot-dtb.bin.
+The u-boot image should be written to 0x10000(but 0x1000 for LS1043A, LS2080A).
+
+=> sf probe 0:0
+SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
+=> sf erase 10000 +<size of u-boot image>
+SF: 589824 bytes @ 0x10000 Erased: OK
+=> sf write <u-boot image in memory> 10000 <size of u-boot image>
+SF: 580966 bytes @ 0x10000 Written: OK
+
+With these two images in QSPI flash device, the board can boot from QSPI.
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
new file mode 100644
index 000000000..f33d05d05
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
@@ -0,0 +1,437 @@
+SoC overview
+
+	1. LS1043A
+	2. LS1088A
+	3. LS2080A
+	4. LS1012A
+	5. LS1046A
+	6. LS2088A
+	7. LS2081A
+	8. LX2160A
+	9. LS1028A
+	10. LX2162A
+
+LS1043A
+---------
+The LS1043A integrated multicore processor combines four ARM Cortex-A53
+processor cores with datapath acceleration optimized for L2/3 packet
+processing, single pass security offload and robust traffic management
+and quality of service.
+
+The LS1043A SoC includes the following function and features:
+ - Four 64-bit ARM Cortex-A53 CPUs
+ - 1 MB unified L2 Cache
+ - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
+   support
+ - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
+   the following functions:
+   - Packet parsing, classification, and distribution (FMan)
+   - Queue management for scheduling, packet sequencing, and congestion
+     management (QMan)
+   - Hardware buffer management for buffer allocation and de-allocation (BMan)
+   - Cryptography acceleration (SEC)
+ - Ethernet interfaces by FMan
+   - Up to 1 x XFI supporting 10G interface
+   - Up to 1 x QSGMII
+   - Up to 4 x SGMII supporting 1000Mbps
+   - Up to 2 x SGMII supporting 2500Mbps
+   - Up to 2 x RGMII supporting 1000Mbps
+ - High-speed peripheral interfaces
+   - Three PCIe 2.0 controllers, one supporting x4 operation
+   - One serial ATA (SATA 3.0) controllers
+ - Additional peripheral interfaces
+   - Three high-speed USB 3.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (eSDXC/eMMC)
+   - Quad Serial Peripheral Interface (QSPI) Controller
+   - Serial peripheral interface (SPI) controller
+   - Four I2C controllers
+   - Two DUARTs
+   - Integrated flash controller supporting NAND and NOR flash
+ - QorIQ platform's trust architecture 2.1
+
+LS1088A
+--------
+The QorIQ LS1088A processor is built on the Layerscape
+architecture combining eight ARM A53 processor cores
+with advanced, high-performance datapath acceleration
+and networks, peripheral interfaces required for
+networking, wireless infrastructure, and general-purpose
+embedded applications.
+
+LS1088A is compliant with the Layerscape Chassis Generation 3.
+
+Features summary:
+ - 8 32-bit / 64-bit ARM v8 Cortex-A53 CPUs
+ - Cores are in 2 cluster of 4-cores each
+ - 1MB L2 - Cache per cluster
+ - Cache coherent interconnect (CCI-400)
+ - 1 64-bit DDR4 SDRAM memory controller with ECC
+ - Data path acceleration architecture 2.0 (DPAA2)
+ - 4-Lane 10GHz SerDes comprising of WRIOP
+ - 4-Lane 10GHz SerDes comprising of PCI, SATA, uQE(TDM/HLDC/UART)
+ - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs
+ - QSPI, SPI, IFC2.0 supporting NAND, NOR flash
+ - 3 PCIe3.0 , 1 SATA3.0, 2 USB3.0, 1 SDXC, 2 DUARTs etc
+ - 2 DUARTs
+ - 4 I2C, GPIO
+ - Thermal monitor unit(TMU)
+ - 4 Flextimers and 1 generic timer
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+   capabilities
+
+LS2080A
+--------
+The LS2080A integrated multicore processor combines eight ARM Cortex-A57
+processor cores with high-performance data path acceleration logic and network
+and peripheral bus interfaces required for networking, telecom/datacom,
+wireless infrastructure, and mil/aerospace applications.
+
+The LS2080A SoC includes the following function and features:
+
+ - Eight 64-bit ARM Cortex-A57 CPUs
+ - 1 MB platform cache with ECC
+ - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
+ - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
+  the AIOP
+ - Data path acceleration architecture (DPAA2) incorporating acceleration for
+ the following functions:
+   - Packet parsing, classification, and distribution (WRIOP)
+   - Queue and Hardware buffer management for scheduling, packet sequencing, and
+     congestion management, buffer allocation and de-allocation (QBMan)
+   - Cryptography acceleration (SEC) at up to 10 Gbps
+   - RegEx pattern matching acceleration (PME) at up to 10 Gbps
+   - Decompression/compression acceleration (DCE) at up to 20 Gbps
+   - Accelerated I/O processing (AIOP) at up to 20 Gbps
+   - QDMA engine
+ - 16 SerDes lanes at up to 10.3125 GHz
+ - Ethernet interfaces
+   - Up to eight 10 Gbps Ethernet MACs
+   - Up to eight 1 / 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+   - Four PCIe 3.0 controllers, one supporting SR-IOV
+ - Additional peripheral interfaces
+   - Two serial ATA (SATA 3.0) controllers
+   - Two high-speed USB 3.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (eSDXC/eMMC)
+   - Serial peripheral interface (SPI) controller
+   - Quad Serial Peripheral Interface (QSPI) Controller
+   - Four I2C controllers
+   - Two DUARTs
+   - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+  capabilities
+
+LS1012A
+--------
+The LS1012A features an advanced 64-bit ARM v8 Cortex-
+A53 processor, with 32 KB of parity protected L1-I cache,
+32 KB of ECC protected L1-D cache, as well as 256 KB of
+ECC protected L2 cache.
+
+The LS1012A SoC includes the following function and features:
+ - One 64-bit ARM v8 Cortex-A53 core with the following capabilities:
+ - ARM v8 cryptography extensions
+ - One 16-bit DDR3L SDRAM memory controller, Up to 1.0 GT/s, Supports
+    16-/8-bit operation (no ECC support)
+ - ARM core-link CCI-400 cache coherent interconnect
+ - Packet Forwarding Engine (PFE)
+ - Cryptography acceleration (SEC)
+ - Ethernet interfaces supported by PFE:
+ - One Configurable x3 SerDes:
+    Two Serdes PLLs supported for usage by any SerDes data lane
+    Support for up to 6 GBaud operation
+ - High-speed peripheral interfaces:
+     - One PCI Express Gen2 controller, supporting x1 operation
+     - One serial ATA (SATA Gen 3.0) controller
+     - One USB 3.0/2.0 controller with integrated PHY
+     - One USB 2.0 controller with ULPI interface. .
+ - Additional peripheral interfaces:
+    - One quad serial peripheral interface (QuadSPI) controller
+    - One serial peripheral interface (SPI) controller
+    - Two enhanced secure digital host controllers
+    - Two I2C controllers
+    - One 16550 compliant DUART (two UART interfaces)
+    - Two general purpose IOs (GPIO)
+    - Two FlexTimers
+    - Five synchronous audio interfaces (SAI)
+    - Pre-boot loader (PBL) provides pre-boot initialization and RCW loading
+    - Single-source clocking solution enabling generation of core, platform,
+    DDR, SerDes, and USB clocks from a single external crystal and internal
+    crystaloscillator
+    - Thermal monitor unit (TMU) with +/- 3C accuracy
+    - Two WatchDog timers
+    - ARM generic timer
+ - QorIQ platform's trust architecture 2.1
+
+LS1046A
+--------
+The LS1046A integrated multicore processor combines four ARM Cortex-A72
+processor cores with datapath acceleration optimized for L2/3 packet
+processing, single pass security offload and robust traffic management
+and quality of service.
+
+The LS1046A SoC includes the following function and features:
+ - Four 64-bit ARM Cortex-A72 CPUs
+ - 2 MB unified L2 Cache
+ - One 64-bit DDR4 SDRAM memory controllers with ECC and interleaving
+   support
+ - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
+   the following functions:
+   - Packet parsing, classification, and distribution (FMan)
+   - Queue management for scheduling, packet sequencing, and congestion
+     management (QMan)
+   - Hardware buffer management for buffer allocation and de-allocation (BMan)
+   - Cryptography acceleration (SEC)
+ - Two Configurable x4 SerDes
+   - Two PLLs per four-lane SerDes
+   - Support for 10G operation
+ - Ethernet interfaces by FMan
+   - Up to 2 x XFI supporting 10G interface (MAC 9, 10)
+   - Up to 1 x QSGMII (MAC 5, 6, 10, 1)
+   - Up to 4 x SGMII supporting 1000Mbps (MAC 5, 6, 9, 10)
+   - Up to 3 x SGMII supporting 2500Mbps (MAC 5, 9, 10)
+   - Up to 2 x RGMII supporting 1000Mbps (MAC 3, 4)
+ - High-speed peripheral interfaces
+   - Three PCIe 3.0 controllers, one supporting x4 operation
+   - One serial ATA (SATA 3.0) controllers
+ - Additional peripheral interfaces
+   - Three high-speed USB 3.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (eSDXC/eMMC)
+   - Quad Serial Peripheral Interface (QSPI) Controller
+   - Serial peripheral interface (SPI) controller
+   - Four I2C controllers
+   - Two DUARTs
+   - Integrated flash controller (IFC) supporting NAND and NOR flash
+ - QorIQ platform's trust architecture 2.1
+
+LS2088A
+--------
+The LS2088A integrated multicore processor combines eight ARM Cortex-A72
+processor cores with high-performance data path acceleration logic and network
+and peripheral bus interfaces required for networking, telecom/datacom,
+wireless infrastructure, and mil/aerospace applications.
+
+The LS2088A SoC includes the following function and features:
+
+ - Eight 64-bit ARM Cortex-A72 CPUs
+ - 1 MB platform cache with ECC
+ - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
+ - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
+   the AIOP
+ - Data path acceleration architecture (DPAA2) incorporating acceleration for
+   the following functions:
+   - Packet parsing, classification, and distribution (WRIOP)
+   - Queue and Hardware buffer management for scheduling, packet sequencing, and
+     congestion management, buffer allocation and de-allocation (QBMan)
+   - Cryptography acceleration (SEC) at up to 10 Gbps
+   - RegEx pattern matching acceleration (PME) at up to 10 Gbps
+   - Decompression/compression acceleration (DCE) at up to 20 Gbps
+   - Accelerated I/O processing (AIOP) at up to 20 Gbps
+   - QDMA engine
+ - 16 SerDes lanes at up to 10.3125 GHz
+ - Ethernet interfaces
+   - Up to eight 10 Gbps Ethernet MACs
+   - Up to eight 1 / 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+   - Four PCIe 3.0 controllers, one supporting SR-IOV
+ - Additional peripheral interfaces
+   - Two serial ATA (SATA 3.0) controllers
+   - Two high-speed USB 3.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (eSDXC/eMMC)
+   - Serial peripheral interface (SPI) controller
+   - Quad Serial Peripheral Interface (QSPI) Controller
+   - Four I2C controllers
+   - Two DUARTs
+   - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+ capabilities
+
+LS2088A SoC has 3 more similar SoC personalities
+1)LS2048A, few difference w.r.t. LS2088A:
+       a) Four 64-bit ARM v8 Cortex-A72 CPUs
+
+2)LS2084A, few difference w.r.t. LS2088A:
+       a) No AIOP
+       b) No 32-bit DDR3 SDRAM memory
+       c) 5 * 1/10G + 5 *1G WRIOP
+       d) No L2 switch
+
+3)LS2044A, few difference w.r.t. LS2084A:
+       a) Four 64-bit ARM v8 Cortex-A72 CPUs
+
+LS2081A
+--------
+LS2081A is 40-pin derivative of LS2084A.
+So feature-wise it is same as LS2084A.
+Refer to LS2084A(LS2088A) section above for details.
+
+It has one more similar SoC personality
+1)LS2041A, few difference w.r.t. LS2081A:
+       a) Four 64-bit ARM v8 Cortex-A72 CPUs
+
+LX2160A
+--------
+The QorIQ LX2160A processor is built in the 16FFC process on
+the Layerscape architecture combining sixteen ARM A72 processor
+cores with advanced, high-performance datapath acceleration and
+network, peripheral interfaces required for networking, wireless
+infrastructure, storage, and general-purpose embedded applications.
+
+LX2160A is compliant with the Layerscape Chassis Generation 3.2.
+
+The LX2160A SoC includes the following function and features:
+  Sixteen 32-bit / 64-bit ARM v8 A72 CPUs
+  Cache Coherent Interconnect Fabric (CCN508 aka “Eliot�)
+  Two 64-bit 3.2GT/s DDR4 SDRAM memory controllers with ECC.
+  Data path acceleration architecture (DPAA2)
+  24 Serdes lanes at up to 25 GHz
+  Ethernet interfaces
+  Single WRIOP tile supporting 130Gbps using 18 MACs
+  Support for 10G-SXGMII (aka USXGMII).
+  Support for SGMII (and 1000Base-KX)
+  Support for XFI (and 10GBase-KR)
+  Support for CAUI4 (100G); CAUI2 (50G) and 25G-AUI(25G).
+  Support for XLAUI (and 40GBase-KR4) for 40G.
+  Support for two RGMII parallel interfaces.
+  Energy efficient Ethernet support (802.3az)
+  IEEE 1588 support.
+  High-speed peripheral interfaces
+	Two PCIe Gen 4.0 8-lane controllers supporting SR-IOV,
+	Four PCIe Gen 4.0 4-lane controllers.
+	Four serial ATA (SATA 3.0) controllers.
+	Two USB 3.0 controllers with integrated PHY
+	Two Enhanced secure digital host controllers
+	Two Controller Area Network (CAN) modules
+	Flexible Serial peripheral interface (FlexSPI) controller.
+	Three Serial peripheral interface (SPI) controllers.
+	Eight I2C Controllers.
+	Four PL011 UARTs supporting two 4-pin UART ports or four 2-pin UART ports.
+	General Purpose IO (GPIO)
+  Support for hardware virtualization and partitioning (ARM MMU-500)
+  Support for GIC (ARM GIC-500)
+  QorIQ platform Trust Architecture 3.0
+  One Secure WatchDog timer and one Non-Secure Watchdog timer.
+  ARM Generic Timer
+  Two Flextimers
+  Debug supporting run control, data acquisition, high-speed trace,
+  performance/event monitoring
+  Thermal Monitor Unit (TMU) with +/- 2C accuracy
+  Support for Voltage ID (VID) for yield improvement
+
+LX2160A SoC has 2 more similar SoC personalities
+1)LX2120A, few difference w.r.t. LX2160A:
+       a) Twelve 64-bit ARM v8 Cortex-A72 CPUs
+
+2)LX2080A, few difference w.r.t. LX2160A:
+       a) Eight 64-bit ARM v8 Cortex-A72 CPUs
+
+
+LS1028A
+--------
+The QorIQ LS1028A processor integrates two 64-bit Arm Cortex-A72 cores with
+a GPU and LCD controller, as well as two TSN-enabled Ethernet controllers and
+a TSNenabled 4-port switch.
+
+The high performance Cortex-A72 cores, performing above 16,000 CoreMarks,
+combined with 2.5 Gbit Ethernet, PCI express Gen 3.0, SATA 3.0, USB 3.0 and
+Octal/Quad SPI interfaces provide capabilities for a number of industrial and
+embedded applications. The device provides excellent integration with the
+new Time-Sensitive Networking standard, and enables a number of
+TSN applications.
+
+The LS1028A SoC includes the following function and features:
+ - Two 64-bit ARM v8 A72 CPUs
+ - Cache Coherent interconnect (CCI-400)
+ - One 32-bit DDR3L/DDR4 SDRAM memory controller with ECC
+ - eDP/Displayport interface
+ - Graphics processing unit
+ - One Configurable x4 SerDes
+ - Ethernet interfaces
+   - Non-switched: One Ethernet MAC supporting 2.5G, 1G, 100M, 10M, one
+   ethernet MAC supporting 1G, 100M, 10M.
+   - Switched: TSN IP to support four 2.5/1G interfaces.
+   - None of the MACs support MACSEC
+   - Support for RGMII, SGMII (and 1000Base-KX), SGMII 2.5x, QSGMII
+   - Support for 10G-SXGMII and 10G-QXGMII.
+   - Energy efficient Ethernet support (802.3az)
+   - IEEE 1588 support
+  - High-speed peripheral interfaces
+    - Two PCIe 3.0 controllers, one supporting x4 operation
+    - One serial ATA (SATA 3.0) controller
+  - Additional peripheral interfaces
+    - Two high-speed USB 2.0/3.0 controllers with integrated PHY each
+      supporting host or device modes
+    - Two Enhanced secure digital host controllers (SD/SDIO/eMMC)
+    - Two Serial peripheral interface (SPI) controllers
+    - Eight I2C controllers
+    - Two UART controllers
+    - Additional six Industrual UARTs (LPUART).
+    - One FlexSPI controller
+    - General Purpose IO (GPIO)
+    - Two CAN-FD interfaces
+    - Eight Flextimers with PWM I/O
+  - Support for hardware virtualization and partitioning enforcement
+  - Layerscape Trust Architecture
+  - Service Processor (SP) provides pre-boot initialization and secure-boot
+    capabilities
+
+LX2162A
+--------
+The QorIQ LX2162A processor is built on the Layerscape architecture
+combining sixteen ARM A72 processor cores with advanced, high-performance
+datapath acceleration and network, peripheral interfaces required for
+networking, wireless infrastructure, storage, and general-purpose embedded
+applications.
+
+LX2162A is compliant with the Layerscape Chassis Generation 3.2.
+
+The LX2162A SoC includes the following function and features:
+  Sixteen 32-bit / 64-bit ARM v8 A72 CPUs
+  Cache Coherent Interconnect Fabric (CCN508)
+  One 64-bit 2.9GT/s DDR4 SDRAM memory controllers with ECC.
+  Data path acceleration architecture (DPAA2)
+  12 Serdes lanes at up to 25 GHz
+  Ethernet interfaces
+  Support for 10G-SXGMII (aka USXGMII).
+  Support for SGMII (and 1000Base-KX)
+  Support for XFI (and 10GBase-KR)
+  Support for CAUI2 (50G) and 25G-AUI(25G).
+  Support for XLAUI (and 40GBase-KR4) for 40G.
+  Support for two RGMII parallel interfaces.
+  Energy efficient Ethernet support (802.3az)
+  IEEE 1588 support.
+  High-speed peripheral interfaces
+	One PCIe Gen 3.0 8-lane controllers supporting SR-IOV,
+	Two PCIe Gen 3.0 4-lane controllers.
+	Four serial ATA (SATA 3.0) controllers.
+	One USB 3.0 controllers with integrated PHY
+	Two Enhanced secure digital host controllers
+	Two Controller Area Network (CAN) modules
+	Flexible Serial peripheral interface (FlexSPI) controller.
+	Three Serial peripheral interface (SPI) controllers.
+	Eight I2C Controllers.
+	Four PL011 UARTs supporting two 4-pin UART ports or four 2-pin UART ports.
+	General Purpose IO (GPIO)
+  Support for hardware virtualization and partitioning (ARM MMU-500)
+  Support for GIC (ARM GIC-500)
+  QorIQ platform Trust Architecture 3.0
+  One Secure WatchDog timer and one Non-Secure Watchdog timer.
+  ARM Generic Timer
+  Two Flextimers
+  Debug supporting run control, data acquisition, high-speed trace,
+  performance/event monitoring
+  Thermal Monitor Unit (TMU) with +/- 2C accuracy
+  Support for Voltage ID (VID) for yield improvement
+
+LX2162A SoC has 2 more similar SoC personalities
+1)LX2122A, few difference w.r.t. LX2162A:
+       a) Twelve 64-bit ARM v8 Cortex-A72 CPUs
+
+2)LX2082A, few difference w.r.t. LX2162A:
+       a) Eight 64-bit ARM v8 Cortex-A72 CPUs
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
new file mode 100644
index 000000000..f1624ff30
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -0,0 +1,700 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2020-2021 NXP
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <efi_loader.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#include <phy.h>
+#ifdef CONFIG_FSL_LSCH3
+#include <asm/arch/fdt.h>
+#endif
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+#ifdef CONFIG_SYS_DPAA_FMAN
+#include <fsl_fman.h>
+#endif
+#ifdef CONFIG_MP
+#include <asm/arch/mp.h>
+#endif
+#include <fsl_sec.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT)
+#include <asm/armv8/sec_firmware.h>
+#endif
+#include <asm/arch/speed.h>
+#include <fsl_qbman.h>
+
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
+{
+	const char *conn;
+
+	/* Do NOT apply fixup for backplane modes specified in DT */
+	if (phyc == PHY_INTERFACE_MODE_XGMII) {
+		conn = fdt_getprop(blob, offset, "phy-connection-type", NULL);
+		if (is_backplane_mode(conn))
+			return 0;
+	}
+	return fdt_setprop_string(blob, offset, "phy-connection-type",
+					 phy_string_for_interface(phyc));
+}
+
+#ifdef CONFIG_MP
+void ft_fixup_cpu(void *blob)
+{
+	int off;
+	__maybe_unused u64 spin_tbl_addr = (u64)get_spin_tbl_addr();
+	fdt32_t *reg;
+	int addr_cells;
+	u64 val, core_id;
+	u32 mask = cpu_pos_mask();
+	int off_prev = -1;
+
+	off = fdt_path_offset(blob, "/cpus");
+	if (off < 0) {
+		puts("couldn't find /cpus node\n");
+		return;
+	}
+
+	fdt_support_default_count_cells(blob, off, &addr_cells, NULL);
+
+	off = fdt_node_offset_by_prop_value(blob, off_prev, "device_type",
+					    "cpu", 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0);
+		if (reg) {
+			core_id = fdt_read_number(reg, addr_cells);
+			if (!test_bit(id_to_core(core_id), &mask)) {
+				fdt_del_node(blob, off);
+				off = off_prev;
+			}
+		}
+		off_prev = off;
+		off = fdt_node_offset_by_prop_value(blob, off_prev,
+						    "device_type", "cpu", 4);
+	}
+
+#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT) && \
+	defined(CONFIG_SEC_FIRMWARE_ARMV8_PSCI)
+	int node;
+	u32 psci_ver;
+
+	/* Check the psci version to determine if the psci is supported */
+	psci_ver = sec_firmware_support_psci_version();
+	if (psci_ver == 0xffffffff) {
+		/* remove psci DT node */
+		node = fdt_path_offset(blob, "/psci");
+		if (node >= 0)
+			goto remove_psci_node;
+
+		node = fdt_node_offset_by_compatible(blob, -1, "arm,psci");
+		if (node >= 0)
+			goto remove_psci_node;
+
+		node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-0.2");
+		if (node >= 0)
+			goto remove_psci_node;
+
+		node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-1.0");
+		if (node >= 0)
+			goto remove_psci_node;
+
+remove_psci_node:
+		if (node >= 0)
+			fdt_del_node(blob, node);
+	} else {
+		return;
+	}
+#endif
+	off = fdt_path_offset(blob, "/cpus");
+	if (off < 0) {
+		puts("couldn't find /cpus node\n");
+		return;
+	}
+	fdt_support_default_count_cells(blob, off, &addr_cells, NULL);
+
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0);
+		if (reg) {
+			core_id = fdt_read_number(reg, addr_cells);
+			if (core_id  == 0 || (is_core_online(core_id))) {
+				val = spin_tbl_addr;
+				val += id_to_core(core_id) *
+				       SPIN_TABLE_ELEM_SIZE;
+				val = cpu_to_fdt64(val);
+				fdt_setprop_string(blob, off, "enable-method",
+						   "spin-table");
+				fdt_setprop(blob, off, "cpu-release-addr",
+					    &val, sizeof(val));
+			} else {
+				debug("skipping offline core\n");
+			}
+		} else {
+			puts("Warning: found cpu node without reg property\n");
+		}
+		off = fdt_node_offset_by_prop_value(blob, off, "device_type",
+						    "cpu", 4);
+	}
+
+	fdt_add_mem_rsv(blob, (uintptr_t)secondary_boot_code_start,
+			secondary_boot_code_size);
+#if CONFIG_IS_ENABLED(EFI_LOADER)
+	efi_add_memory_map((uintptr_t)secondary_boot_code_start,
+			   secondary_boot_code_size, EFI_RESERVED_MEMORY_TYPE);
+#endif
+}
+#endif
+
+void fsl_fdt_disable_usb(void *blob)
+{
+	int off;
+	/*
+	 * SYSCLK is used as a reference clock for USB. When the USB
+	 * controller is used, SYSCLK must meet the additional requirement
+	 * of 100 MHz.
+	 */
+	if (CONFIG_SYS_CLK_FREQ != 100000000) {
+		off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
+		while (off != -FDT_ERR_NOTFOUND) {
+			fdt_status_disabled(blob, off);
+			off = fdt_node_offset_by_compatible(blob, off,
+							    "snps,dwc3");
+		}
+	}
+}
+
+#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
+static void fdt_fixup_gic(void *blob)
+{
+	int offset, err;
+	u64 reg[8];
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int val;
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	int align_64k = 0;
+
+	val = gur_in32(&gur->svr);
+
+	if (!IS_SVR_DEV(val, SVR_DEV(SVR_LS1043A))) {
+		align_64k = 1;
+	} else if (SVR_REV(val) != REV1_0) {
+		val = scfg_in32(&scfg->gic_align) & (0x01 << GIC_ADDR_BIT);
+		if (!val)
+			align_64k = 1;
+	}
+
+	offset = fdt_subnode_offset(blob, 0, "interrupt-controller@1400000");
+	if (offset < 0) {
+		printf("WARNING: fdt_subnode_offset can't find node %s: %s\n",
+		       "interrupt-controller@1400000", fdt_strerror(offset));
+		return;
+	}
+
+	/* Fixup gic node align with 64K */
+	if (align_64k) {
+		reg[0] = cpu_to_fdt64(GICD_BASE_64K);
+		reg[1] = cpu_to_fdt64(GICD_SIZE_64K);
+		reg[2] = cpu_to_fdt64(GICC_BASE_64K);
+		reg[3] = cpu_to_fdt64(GICC_SIZE_64K);
+		reg[4] = cpu_to_fdt64(GICH_BASE_64K);
+		reg[5] = cpu_to_fdt64(GICH_SIZE_64K);
+		reg[6] = cpu_to_fdt64(GICV_BASE_64K);
+		reg[7] = cpu_to_fdt64(GICV_SIZE_64K);
+	} else {
+	/* Fixup gic node align with default */
+		reg[0] = cpu_to_fdt64(GICD_BASE);
+		reg[1] = cpu_to_fdt64(GICD_SIZE);
+		reg[2] = cpu_to_fdt64(GICC_BASE);
+		reg[3] = cpu_to_fdt64(GICC_SIZE);
+		reg[4] = cpu_to_fdt64(GICH_BASE);
+		reg[5] = cpu_to_fdt64(GICH_SIZE);
+		reg[6] = cpu_to_fdt64(GICV_BASE);
+		reg[7] = cpu_to_fdt64(GICV_SIZE);
+	}
+
+	err = fdt_setprop(blob, offset, "reg", reg, sizeof(reg));
+	if (err < 0) {
+		printf("WARNING: fdt_setprop can't set %s from node %s: %s\n",
+		       "reg", "interrupt-controller@1400000",
+		       fdt_strerror(err));
+		return;
+	}
+
+	return;
+}
+#endif
+
+#ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI
+static int _fdt_fixup_msi_node(void *blob, const char *name,
+				  int irq_0, int irq_1, int rev)
+{
+	int err, offset, len;
+	u32 tmp[4][3];
+	void *p;
+
+	offset = fdt_path_offset(blob, name);
+	if (offset < 0) {
+		printf("WARNING: fdt_path_offset can't find path %s: %s\n",
+		       name, fdt_strerror(offset));
+		return 0;
+	}
+
+	/*fixup the property of interrupts*/
+
+	tmp[0][0] = cpu_to_fdt32(0x0);
+	tmp[0][1] = cpu_to_fdt32(irq_0);
+	tmp[0][2] = cpu_to_fdt32(0x4);
+
+	if (rev > REV1_0) {
+		tmp[1][0] = cpu_to_fdt32(0x0);
+		tmp[1][1] = cpu_to_fdt32(irq_1);
+		tmp[1][2] = cpu_to_fdt32(0x4);
+		tmp[2][0] = cpu_to_fdt32(0x0);
+		tmp[2][1] = cpu_to_fdt32(irq_1 + 1);
+		tmp[2][2] = cpu_to_fdt32(0x4);
+		tmp[3][0] = cpu_to_fdt32(0x0);
+		tmp[3][1] = cpu_to_fdt32(irq_1 + 2);
+		tmp[3][2] = cpu_to_fdt32(0x4);
+		len = sizeof(tmp);
+	} else {
+		len = sizeof(tmp[0]);
+	}
+
+	err = fdt_setprop(blob, offset, "interrupts", tmp, len);
+	if (err < 0) {
+		printf("WARNING: fdt_setprop can't set %s from node %s: %s\n",
+		       "interrupts", name, fdt_strerror(err));
+		return 0;
+	}
+
+	/*fixup the property of reg*/
+	p = (char *)fdt_getprop(blob, offset, "reg", &len);
+	if (!p) {
+		printf("WARNING: fdt_getprop can't get %s from node %s\n",
+		       "reg", name);
+		return 0;
+	}
+
+	memcpy((char *)tmp, p, len);
+
+	if (rev > REV1_0)
+		*((u32 *)tmp + 3) = cpu_to_fdt32(0x1000);
+	else
+		*((u32 *)tmp + 3) = cpu_to_fdt32(0x8);
+
+	err = fdt_setprop(blob, offset, "reg", tmp, len);
+	if (err < 0) {
+		printf("WARNING: fdt_setprop can't set %s from node %s: %s\n",
+		       "reg", name, fdt_strerror(err));
+		return 0;
+	}
+
+	/*fixup the property of compatible*/
+	if (rev > REV1_0)
+		err = fdt_setprop_string(blob, offset, "compatible",
+					 "fsl,ls1043a-v1.1-msi");
+	else
+		err = fdt_setprop_string(blob, offset, "compatible",
+					 "fsl,ls1043a-msi");
+	if (err < 0) {
+		printf("WARNING: fdt_setprop can't set %s from node %s: %s\n",
+		       "compatible", name, fdt_strerror(err));
+		return 0;
+	}
+
+	return 1;
+}
+
+static int _fdt_fixup_pci_msi(void *blob, const char *name, int rev)
+{
+	int offset, len, err;
+	void *p;
+	int val;
+	u32 tmp[4][8];
+
+	offset = fdt_path_offset(blob, name);
+	if (offset < 0) {
+		printf("WARNING: fdt_path_offset can't find path %s: %s\n",
+		       name, fdt_strerror(offset));
+		return 0;
+	}
+
+	p = (char *)fdt_getprop(blob, offset, "interrupt-map", &len);
+	if (!p || len != sizeof(tmp)) {
+		printf("WARNING: fdt_getprop can't get %s from node %s\n",
+		       "interrupt-map", name);
+		return 0;
+	}
+
+	memcpy((char *)tmp, p, len);
+
+	val = fdt32_to_cpu(tmp[0][6]);
+	if (rev == REV1_0) {
+		tmp[1][6] = cpu_to_fdt32(val + 1);
+		tmp[2][6] = cpu_to_fdt32(val + 2);
+		tmp[3][6] = cpu_to_fdt32(val + 3);
+	} else {
+		tmp[1][6] = cpu_to_fdt32(val);
+		tmp[2][6] = cpu_to_fdt32(val);
+		tmp[3][6] = cpu_to_fdt32(val);
+	}
+
+	err = fdt_setprop(blob, offset, "interrupt-map", tmp, sizeof(tmp));
+	if (err < 0) {
+		printf("WARNING: fdt_setprop can't set %s from node %s: %s.\n",
+		       "interrupt-map", name, fdt_strerror(err));
+		return 0;
+	}
+	return 1;
+}
+
+/* Fixup msi node for ls1043a rev1.1*/
+
+static void fdt_fixup_msi(void *blob)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int rev;
+
+	rev = gur_in32(&gur->svr);
+
+	if (!IS_SVR_DEV(rev, SVR_DEV(SVR_LS1043A)))
+		return;
+
+	rev = SVR_REV(rev);
+
+	_fdt_fixup_msi_node(blob, "/soc/msi-controller1@1571000",
+			    116, 111, rev);
+	_fdt_fixup_msi_node(blob, "/soc/msi-controller2@1572000",
+			    126, 121, rev);
+	_fdt_fixup_msi_node(blob, "/soc/msi-controller3@1573000",
+			    160, 155, rev);
+
+	_fdt_fixup_pci_msi(blob, "/soc/pcie@3400000", rev);
+	_fdt_fixup_pci_msi(blob, "/soc/pcie@3500000", rev);
+	_fdt_fixup_pci_msi(blob, "/soc/pcie@3600000", rev);
+}
+#endif
+
+#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT)
+/* Remove JR node used by SEC firmware */
+void fdt_fixup_remove_jr(void *blob)
+{
+	int jr_node, addr_cells, len;
+	int crypto_node = fdt_path_offset(blob, "crypto");
+	u64 jr_offset, used_jr;
+	fdt32_t *reg;
+
+	used_jr = sec_firmware_used_jobring_offset();
+	fdt_support_default_count_cells(blob, crypto_node, &addr_cells, NULL);
+
+	jr_node = fdt_node_offset_by_compatible(blob, crypto_node,
+						"fsl,sec-v4.0-job-ring");
+
+	while (jr_node != -FDT_ERR_NOTFOUND) {
+		reg = (fdt32_t *)fdt_getprop(blob, jr_node, "reg", &len);
+		if (reg) {
+			jr_offset = fdt_read_number(reg, addr_cells);
+			if (jr_offset == used_jr) {
+				fdt_del_node(blob, jr_node);
+				break;
+			}
+		}
+		jr_node = fdt_node_offset_by_compatible(blob, jr_node,
+							"fsl,sec-v4.0-job-ring");
+	}
+}
+#endif
+
+#ifdef CONFIG_ARCH_LS1028A
+static void fdt_disable_multimedia(void *blob, unsigned int svr)
+{
+	int off;
+
+	if (IS_MULTIMEDIA_EN(svr))
+		return;
+
+	/* Disable eDP/LCD node */
+	off = fdt_node_offset_by_compatible(blob, -1, "arm,mali-dp500");
+	if (off != -FDT_ERR_NOTFOUND)
+		fdt_status_disabled(blob, off);
+
+	/* Disable GPU node */
+	off = fdt_node_offset_by_compatible(blob, -1, "fsl,ls1028a-gpu");
+	if (off != -FDT_ERR_NOTFOUND)
+		fdt_status_disabled(blob, off);
+}
+#endif
+
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+__weak void fdt_fixup_ecam(void *blob)
+{
+}
+#endif
+
+/*
+ * If it is a non-E part the crypto is disabled on the following SoCs:
+ *  - LS1043A
+ *  - LS1088A
+ *  - LS2080A
+ *  - LS2088A
+ * and their personalities.
+ *
+ * On all other SoCs just the export-controlled ciphers are disabled, that
+ * means that the following is still working:
+ *  - hashing (using MDHA - message digest hash accelerator)
+ *  - random number generation (using RNG4)
+ *  - cyclic redundancy checking (using CRCA)
+ *  - runtime integrity checker (RTIC)
+ *
+ * The linux driver will figure out what is available and what is not.
+ * Therefore, we just remove the crypto node on the SoCs which have no crypto
+ * support at all.
+ */
+static bool crypto_is_disabled(unsigned int svr)
+{
+	if (IS_E_PROCESSOR(svr))
+		return false;
+
+	if (IS_SVR_DEV(svr, SVR_DEV(SVR_LS1043A)))
+		return true;
+
+	if (IS_SVR_DEV(svr, SVR_DEV(SVR_LS1088A)))
+		return true;
+
+	if (IS_SVR_DEV(svr, SVR_DEV(SVR_LS2080A)))
+		return true;
+
+	if (IS_SVR_DEV(svr, SVR_DEV(SVR_LS2088A)))
+		return true;
+
+	return false;
+}
+
+#ifdef CONFIG_FSL_PFE
+void pfe_set_firmware_in_fdt(void *blob, int pfenode, void *pfw, char *pename,
+			     unsigned int len)
+{
+	int rc, fwnode;
+	unsigned int phandle;
+	char subnode_str[32], prop_str[32], phandle_str[32], s[64];
+
+	sprintf(subnode_str, "pfe-%s-firmware", pename);
+	sprintf(prop_str, "fsl,pfe-%s-firmware", pename);
+	sprintf(phandle_str, "fsl,%s-firmware", pename);
+
+	/*Add PE FW to fdt.*/
+	/* Increase the size of the fdt to make room for the node. */
+	rc = fdt_increase_size(blob, len);
+	if (rc < 0) {
+		printf("Unable to make room for %s firmware: %s\n", pename,
+		       fdt_strerror(rc));
+		return;
+	}
+
+	/* Create the firmware node. */
+	fwnode = fdt_add_subnode(blob, pfenode, subnode_str);
+	if (fwnode < 0) {
+		fdt_get_path(blob, pfenode, s, sizeof(s));
+		printf("Could not add firmware node to %s: %s\n", s,
+		       fdt_strerror(fwnode));
+		return;
+	}
+
+	rc = fdt_setprop_string(blob, fwnode, "compatible", prop_str);
+	if (rc < 0) {
+		fdt_get_path(blob, fwnode, s, sizeof(s));
+		printf("Could not add compatible property to node %s: %s\n", s,
+		       fdt_strerror(rc));
+		return;
+	}
+
+	rc = fdt_setprop_u32(blob, fwnode, "length", len);
+	if (rc < 0) {
+		fdt_get_path(blob, fwnode, s, sizeof(s));
+		printf("Could not add compatible property to node %s: %s\n", s,
+		       fdt_strerror(rc));
+		return;
+	}
+
+	/*create phandle and set the property*/
+	phandle = fdt_create_phandle(blob, fwnode);
+	if (!phandle) {
+		fdt_get_path(blob, fwnode, s, sizeof(s));
+		printf("Could not add phandle property to node %s: %s\n", s,
+		       fdt_strerror(rc));
+		return;
+	}
+
+	rc = fdt_setprop(blob, fwnode, phandle_str, pfw, len);
+	if (rc < 0) {
+		fdt_get_path(blob, fwnode, s, sizeof(s));
+		printf("Could not add firmware property to node %s: %s\n", s,
+		       fdt_strerror(rc));
+		return;
+	}
+}
+
+void fdt_fixup_pfe_firmware(void *blob)
+{
+	int pfenode;
+	unsigned int len_class = 0, len_tmu = 0, len_util = 0;
+	const char *p;
+	void *pclassfw, *ptmufw, *putilfw;
+
+	/* The first PFE we find, will contain the actual firmware. */
+	pfenode = fdt_node_offset_by_compatible(blob, -1, "fsl,pfe");
+	if (pfenode < 0)
+		/* Exit silently if there are no PFE devices */
+		return;
+
+	/* If we already have a firmware node, then also exit silently. */
+	if (fdt_node_offset_by_compatible(blob, -1,
+					  "fsl,pfe-class-firmware") > 0)
+		return;
+
+	/* If the environment variable is not set, then exit silently */
+	p = env_get("class_elf_firmware");
+	if (!p)
+		return;
+
+	pclassfw = (void *)simple_strtoul(p, NULL, 16);
+	if (!pclassfw)
+		return;
+
+	p = env_get("class_elf_size");
+	if (!p)
+		return;
+	len_class = simple_strtoul(p, NULL, 16);
+
+	/* If the environment variable is not set, then exit silently */
+	p = env_get("tmu_elf_firmware");
+	if (!p)
+		return;
+
+	ptmufw = (void *)simple_strtoul(p, NULL, 16);
+	if (!ptmufw)
+		return;
+
+	p = env_get("tmu_elf_size");
+	if (!p)
+		return;
+	len_tmu = simple_strtoul(p, NULL, 16);
+
+	if (len_class == 0 || len_tmu == 0) {
+		printf("PFE FW corrupted. CLASS FW size %d, TMU FW size %d\n",
+		       len_class, len_tmu);
+		return;
+	}
+
+	/*Add CLASS FW to fdt.*/
+	pfe_set_firmware_in_fdt(blob, pfenode, pclassfw, "class", len_class);
+
+	/*Add TMU FW to fdt.*/
+	pfe_set_firmware_in_fdt(blob, pfenode, ptmufw, "tmu", len_tmu);
+
+	/* Util PE firmware is handled separately as it is not a usual case*/
+	p = env_get("util_elf_firmware");
+	if (!p)
+		return;
+
+	putilfw = (void *)simple_strtoul(p, NULL, 16);
+	if (!putilfw)
+		return;
+
+	p = env_get("util_elf_size");
+	if (!p)
+		return;
+	len_util = simple_strtoul(p, NULL, 16);
+
+	if (len_util) {
+		printf("PFE Util PE firmware is not added to FDT.\n");
+		return;
+	}
+
+	pfe_set_firmware_in_fdt(blob, pfenode, putilfw, "util", len_util);
+}
+#endif
+
+void ft_cpu_setup(void *blob, struct bd_info *bd)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int svr = gur_in32(&gur->svr);
+
+	/* delete crypto node if not on an E-processor */
+	if (crypto_is_disabled(svr))
+		fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+	else {
+		ccsr_sec_t __iomem *sec;
+
+#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT)
+		fdt_fixup_remove_jr(blob);
+		fdt_fixup_kaslr(blob);
+#endif
+
+		sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+		fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
+	}
+#endif
+
+#ifdef CONFIG_MP
+	ft_fixup_cpu(blob);
+#endif
+
+#ifdef CONFIG_SYS_NS16550
+	do_fixup_by_compat_u32(blob, "fsl,ns16550",
+			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+	do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency",
+			     CONFIG_SYS_CLK_FREQ, 1);
+
+#ifdef CONFIG_GIC_V3_ITS
+	ls_gic_rd_tables_init(blob);
+#endif
+
+#if defined(CONFIG_PCIE_LAYERSCAPE) || defined(CONFIG_PCIE_LAYERSCAPE_GEN4)
+	ft_pci_setup(blob, bd);
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+	fdt_fixup_esdhc(blob, bd);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	fdt_fixup_bportals(blob);
+	fdt_fixup_qportals(blob);
+	do_fixup_by_compat_u32(blob, "fsl,qman",
+			       "clock-frequency", get_qman_freq(), 1);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_firmware(blob);
+#endif
+#ifdef CONFIG_FSL_PFE
+	fdt_fixup_pfe_firmware(blob);
+#endif
+#ifndef CONFIG_ARCH_LS1012A
+	fsl_fdt_disable_usb(blob);
+#endif
+#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
+	fdt_fixup_gic(blob);
+#endif
+#ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI
+	fdt_fixup_msi(blob);
+#endif
+#ifdef CONFIG_ARCH_LS1028A
+	fdt_disable_multimedia(blob, svr);
+#endif
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+	fdt_fixup_ecam(blob);
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
new file mode 100644
index 000000000..41c89b890
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	int ret = 0;
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	if (!serdes1_prtcl_map[NONE])
+		fsl_serdes_init();
+
+	ret |= serdes1_prtcl_map[device];
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	if (!serdes2_prtcl_map[NONE])
+		fsl_serdes_init();
+
+	ret |= serdes2_prtcl_map[device];
+#endif
+
+	return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg = gur_in32(&gur->rcwsr[4]);
+	int i;
+
+	switch (sd) {
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	case FSL_SRDS_1:
+		cfg &= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+		break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	case FSL_SRDS_2:
+		cfg &= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
+		break;
+#endif
+	default:
+		printf("invalid SerDes%d\n", sd);
+		break;
+	}
+
+	/* Is serdes enabled at all? */
+	if (unlikely(cfg == 0))
+		return -ENODEV;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_get_prtcl(sd, cfg, i) == device)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+int get_serdes_protocol(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg = gur_in32(&gur->rcwsr[4]) &
+			  FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+	cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	return cfg;
+}
+
+const char *serdes_clock_to_string(u32 clock)
+{
+	switch (clock) {
+	case SRDS_PLLCR0_RFCK_SEL_100:
+		return "100";
+	case SRDS_PLLCR0_RFCK_SEL_125:
+		return "125";
+	case SRDS_PLLCR0_RFCK_SEL_156_25:
+		return "156.25";
+	default:
+		return "100";
+	}
+}
+
+void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
+		 u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg;
+	int lane;
+
+	if (serdes_prtcl_map[NONE])
+		return;
+
+	memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
+
+	cfg = gur_in32(&gur->rcwsr[4]) & sd_prctl_mask;
+	cfg >>= sd_prctl_shift;
+	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
+
+	if (!is_serdes_prtcl_valid(sd, cfg))
+		printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+
+		if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
+			debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
+		else
+			serdes_prtcl_map[lane_prtcl] = 1;
+	}
+
+	/* Set the first element to indicate serdes has been initialized */
+	serdes_prtcl_map[NONE] = 1;
+}
+
+__weak int get_serdes_volt(void)
+{
+	return -1;
+}
+
+__weak int set_serdes_volt(int svdd)
+{
+	return -1;
+}
+
+int setup_serdes_volt(u32 svdd)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_serdes *serdes1_base;
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	struct ccsr_serdes *serdes2_base;
+#endif
+	u32 cfg_rcw4 = gur_in32(&gur->rcwsr[4]);
+	u32 cfg_rcw5 = gur_in32(&gur->rcwsr[5]);
+	u32 cfg_tmp, reg = 0;
+	int svdd_cur, svdd_tar;
+	int ret;
+	int i;
+
+	/* Only support switch SVDD to 900mV/1000mV */
+	if (svdd != 900 && svdd != 1000)
+		return -EINVAL;
+
+	svdd_tar = svdd;
+	svdd_cur = get_serdes_volt();
+	if (svdd_cur < 0)
+		return -EINVAL;
+
+	debug("%s: current SVDD: %dmV; target SVDD: %dmV\n",
+	      __func__, svdd_cur, svdd_tar);
+	if (svdd_cur == svdd_tar)
+		return 0;
+
+	serdes1_base = (void *)CONFIG_SYS_FSL_SERDES_ADDR;
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	serdes2_base = (void *)serdes1_base + 0x10000;
+#endif
+
+	/* Put the all enabled lanes in reset */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+	cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
+		reg = in_be32(&serdes1_base->lane[i].gcr0);
+		reg &= 0xFF9FFFFF;
+		out_be32(&serdes1_base->lane[i].gcr0, reg);
+	}
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
+	cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+	for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
+		reg = in_be32(&serdes2_base->lane[i].gcr0);
+		reg &= 0xFF9FFFFF;
+		out_be32(&serdes2_base->lane[i].gcr0, reg);
+	}
+#endif
+
+	/* Put the all enabled PLL in reset */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
+	for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
+		reg = in_be32(&serdes1_base->bank[i].rstctl);
+		reg &= 0xFFFFFFBF;
+		reg |= 0x10000000;
+		out_be32(&serdes1_base->bank[i].rstctl, reg);
+		udelay(1);
+
+		reg = in_be32(&serdes1_base->bank[i].rstctl);
+		reg &= 0xFFFFFF1F;
+		out_be32(&serdes1_base->bank[i].rstctl, reg);
+	}
+	udelay(1);
+#endif
+
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
+	for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
+		reg = in_be32(&serdes2_base->bank[i].rstctl);
+		reg &= 0xFFFFFFBF;
+		reg |= 0x10000000;
+		out_be32(&serdes2_base->bank[i].rstctl, reg);
+		udelay(1);
+
+		reg = in_be32(&serdes2_base->bank[i].rstctl);
+		reg &= 0xFFFFFF1F;
+		out_be32(&serdes2_base->bank[i].rstctl, reg);
+	}
+	udelay(1);
+#endif
+
+	/* Put the Rx/Tx calibration into reset */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	reg = in_be32(&serdes1_base->srdstcalcr);
+	reg &= 0xF7FFFFFF;
+	out_be32(&serdes1_base->srdstcalcr, reg);
+	reg = in_be32(&serdes1_base->srdsrcalcr);
+	reg &= 0xF7FFFFFF;
+	out_be32(&serdes1_base->srdsrcalcr, reg);
+
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	reg = in_be32(&serdes2_base->srdstcalcr);
+	reg &= 0xF7FFFFFF;
+	out_be32(&serdes2_base->srdstcalcr, reg);
+	reg = in_be32(&serdes2_base->srdsrcalcr);
+	reg &= 0xF7FFFFFF;
+	out_be32(&serdes2_base->srdsrcalcr, reg);
+#endif
+
+	/*
+	 * If SVDD set failed, will not return directly, so that the
+	 * serdes lanes can complete reseting.
+	 */
+	ret = set_serdes_volt(svdd_tar);
+	if (ret)
+		printf("%s: Failed to set SVDD\n", __func__);
+
+	/* Wait for SVDD to stabilize */
+	udelay(100);
+
+	/* For each PLL that’s not disabled via RCW */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
+	for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
+		reg = in_be32(&serdes1_base->bank[i].rstctl);
+		reg |= 0x00000020;
+		out_be32(&serdes1_base->bank[i].rstctl, reg);
+		udelay(1);
+
+		reg = in_be32(&serdes1_base->bank[i].rstctl);
+		reg |= 0x00000080;
+		out_be32(&serdes1_base->bank[i].rstctl, reg);
+
+		/* Take the Rx/Tx calibration out of reset */
+		if (!(cfg_tmp == 0x3 && i == 1)) {
+			udelay(1);
+			reg = in_be32(&serdes1_base->srdstcalcr);
+			reg |= 0x08000000;
+			out_be32(&serdes1_base->srdstcalcr, reg);
+			reg = in_be32(&serdes1_base->srdsrcalcr);
+			reg |= 0x08000000;
+			out_be32(&serdes1_base->srdsrcalcr, reg);
+		}
+	}
+	udelay(1);
+#endif
+
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
+	for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
+		reg = in_be32(&serdes2_base->bank[i].rstctl);
+		reg |= 0x00000020;
+		out_be32(&serdes2_base->bank[i].rstctl, reg);
+		udelay(1);
+
+		reg = in_be32(&serdes2_base->bank[i].rstctl);
+		reg |= 0x00000080;
+		out_be32(&serdes2_base->bank[i].rstctl, reg);
+
+		/* Take the Rx/Tx calibration out of reset */
+		if (!(cfg_tmp == 0x3 && i == 1)) {
+			udelay(1);
+			reg = in_be32(&serdes2_base->srdstcalcr);
+			reg |= 0x08000000;
+			out_be32(&serdes2_base->srdstcalcr, reg);
+			reg = in_be32(&serdes2_base->srdsrcalcr);
+			reg |= 0x08000000;
+			out_be32(&serdes2_base->srdsrcalcr, reg);
+		}
+	}
+	udelay(1);
+
+#endif
+
+	/* Wait for at lesat 625us to ensure the PLLs being reset are locked */
+	udelay(800);
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
+	for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
+		/* if the PLL is not locked, set RST_ERR */
+		reg = in_be32(&serdes1_base->bank[i].pllcr0);
+		if (!((reg >> 23) & 0x1)) {
+			reg = in_be32(&serdes1_base->bank[i].rstctl);
+			reg |= 0x20000000;
+			out_be32(&serdes1_base->bank[i].rstctl, reg);
+		} else {
+			udelay(1);
+			reg = in_be32(&serdes1_base->bank[i].rstctl);
+			reg &= 0xFFFFFFEF;
+			reg |= 0x00000040;
+			out_be32(&serdes1_base->bank[i].rstctl, reg);
+			udelay(1);
+		}
+	}
+#endif
+
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
+	for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
+		reg = in_be32(&serdes2_base->bank[i].pllcr0);
+		if (!((reg >> 23) & 0x1)) {
+			reg = in_be32(&serdes2_base->bank[i].rstctl);
+			reg |= 0x20000000;
+			out_be32(&serdes2_base->bank[i].rstctl, reg);
+		} else {
+			udelay(1);
+			reg = in_be32(&serdes2_base->bank[i].rstctl);
+			reg &= 0xFFFFFFEF;
+			reg |= 0x00000040;
+			out_be32(&serdes2_base->bank[i].rstctl, reg);
+			udelay(1);
+		}
+	}
+#endif
+
+	/* Take the all enabled lanes out of reset */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+	cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
+		reg = in_be32(&serdes1_base->lane[i].gcr0);
+		reg |= 0x00600000;
+		out_be32(&serdes1_base->lane[i].gcr0, reg);
+	}
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
+	cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+	for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
+		reg = in_be32(&serdes2_base->lane[i].gcr0);
+		reg |= 0x00600000;
+		out_be32(&serdes2_base->lane[i].gcr0, reg);
+	}
+#endif
+	/* For each PLL being reset, and achieved PLL lock set RST_DONE */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
+	for (i = 0; i < 2; i++) {
+		reg = in_be32(&serdes1_base->bank[i].pllcr0);
+		if (!(cfg_tmp & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
+			reg = in_be32(&serdes1_base->bank[i].rstctl);
+			reg |= 0x40000000;
+			out_be32(&serdes1_base->bank[i].rstctl, reg);
+		}
+	}
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
+	for (i = 0; i < 2; i++) {
+		reg = in_be32(&serdes2_base->bank[i].pllcr0);
+		if (!(cfg_tmp & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
+			reg = in_be32(&serdes2_base->bank[i].rstctl);
+			reg |= 0x40000000;
+			out_be32(&serdes2_base->bank[i].rstctl, reg);
+		}
+	}
+#endif
+
+	return ret;
+}
+
+void fsl_serdes_init(void)
+{
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	serdes_init(FSL_SRDS_1,
+		    CONFIG_SYS_FSL_SERDES_ADDR,
+		    FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK,
+		    FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT,
+		    serdes1_prtcl_map);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	serdes_init(FSL_SRDS_2,
+		    CONFIG_SYS_FSL_SERDES_ADDR,
+		    FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK,
+		    FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT,
+		    serdes2_prtcl_map);
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
new file mode 100644
index 000000000..63d34e1ec
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP.
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <cpu_func.h>
+#include <asm/global_data.h>
+#include <linux/compiler.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/soc.h>
+#include <fsl_ifc.h>
+#include "cpu.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
+#define CONFIG_SYS_FSL_NUM_CC_PLLS      2
+#endif
+
+void get_sys_info(struct sys_info *sys_info)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+/* rcw_tmp is needed to get FMAN clock, or to get cluster group A
+ * mux 2 clock for LS1043A/LS1046A.
+ */
+#if defined(CONFIG_SYS_DPAA_FMAN) || \
+	    defined(CONFIG_TARGET_LS1046ARDB) || \
+	    defined(CONFIG_TARGET_LS1043ARDB)
+	u32 rcw_tmp;
+#endif
+	struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_CLK_ADDR);
+	unsigned int cpu;
+	const u8 core_cplx_pll[8] = {
+		[0] = 0,	/* CC1 PPL / 1 */
+		[1] = 0,	/* CC1 PPL / 2 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 1,	/* CC2 PPL / 2 */
+	};
+
+	const u8 core_cplx_pll_div[8] = {
+		[0] = 1,	/* CC1 PPL / 1 */
+		[1] = 2,	/* CC1 PPL / 2 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 2,	/* CC2 PPL / 2 */
+	};
+
+	uint i, cluster;
+	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+	unsigned long cluster_clk;
+
+	sys_info->freq_systembus = sysclk;
+#ifndef CONFIG_CLUSTER_CLK_FREQ
+#define CONFIG_CLUSTER_CLK_FREQ	CONFIG_SYS_CLK_FREQ
+#endif
+	cluster_clk = CONFIG_CLUSTER_CLK_FREQ;
+
+#ifdef CONFIG_DDR_CLK_FREQ
+	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#else
+	sys_info->freq_ddrbus = sysclk;
+#endif
+
+	/* The freq_systembus is used to record frequency of platform PLL */
+	sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >>
+			FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
+			FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
+
+#ifdef CONFIG_ARCH_LS1012A
+	sys_info->freq_ddrbus = 2 * sys_info->freq_systembus;
+#else
+	sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
+			FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT) &
+			FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK;
+#endif
+
+	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
+		ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0xff;
+		if (ratio[i] > 4)
+			freq_c_pll[i] = cluster_clk * ratio[i];
+		else
+			freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
+	}
+
+	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+		cluster = fsl_qoriq_core_to_cluster(cpu);
+		u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27)
+				& 0xf;
+		u32 cplx_pll = core_cplx_pll[c_pll_sel];
+
+		sys_info->freq_processor[cpu] =
+			freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+	}
+
+#define HWA_CGA_M1_CLK_SEL	0xe0000000
+#define HWA_CGA_M1_CLK_SHIFT	29
+#ifdef CONFIG_SYS_DPAA_FMAN
+	rcw_tmp = in_be32(&gur->rcwsr[7]);
+	switch ((rcw_tmp & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) {
+	case 2:
+		sys_info->freq_fman[0] = freq_c_pll[0] / 2;
+		break;
+	case 3:
+		sys_info->freq_fman[0] = freq_c_pll[0] / 3;
+		break;
+	case 4:
+		sys_info->freq_fman[0] = freq_c_pll[0] / 4;
+		break;
+	case 5:
+		sys_info->freq_fman[0] = sys_info->freq_systembus;
+		break;
+	case 6:
+		sys_info->freq_fman[0] = freq_c_pll[1] / 2;
+		break;
+	case 7:
+		sys_info->freq_fman[0] = freq_c_pll[1] / 3;
+		break;
+	default:
+		printf("Error: Unknown FMan1 clock select!\n");
+		break;
+	}
+#endif
+
+#define HWA_CGA_M2_CLK_SEL	0x00000007
+#define HWA_CGA_M2_CLK_SHIFT	0
+#if defined(CONFIG_TARGET_LS1046ARDB) || defined(CONFIG_TARGET_LS1043ARDB)
+	rcw_tmp = in_be32(&gur->rcwsr[15]);
+	switch ((rcw_tmp & HWA_CGA_M2_CLK_SEL) >> HWA_CGA_M2_CLK_SHIFT) {
+	case 1:
+		sys_info->freq_cga_m2 = freq_c_pll[1];
+		break;
+#if defined(CONFIG_TARGET_LS1046ARDB)
+	case 2:
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 2;
+		break;
+#endif
+	case 3:
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 3;
+		break;
+#if defined(CONFIG_TARGET_LS1046ARDB)
+	case 6:
+		sys_info->freq_cga_m2 = freq_c_pll[0] / 2;
+		break;
+#endif
+	default:
+		printf("Error: Unknown cluster group A mux 2 clock select!\n");
+		break;
+	}
+#endif
+
+#if defined(CONFIG_FSL_IFC)
+	sys_info->freq_localbus = sys_info->freq_systembus /
+						CONFIG_SYS_FSL_IFC_CLK_DIV;
+#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	sys_info->freq_qman = (sys_info->freq_systembus /
+				CONFIG_SYS_FSL_PCLK_DIV) /
+				CONFIG_SYS_FSL_QMAN_CLK_DIV;
+#endif
+}
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+unsigned long get_qman_freq(void)
+{
+	struct sys_info sys_info;
+
+	get_sys_info(&sys_info);
+
+	return sys_info.freq_qman;
+}
+#endif
+
+int get_clocks(void)
+{
+	struct sys_info sys_info;
+#ifdef CONFIG_FSL_ESDHC
+	u32 clock = 0;
+#endif
+	get_sys_info(&sys_info);
+	gd->cpu_clk = sys_info.freq_processor[0];
+	gd->bus_clk = sys_info.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV;
+	gd->mem_clk = sys_info.freq_ddrbus;
+#ifdef CONFIG_FSL_ESDHC
+#if defined(CONFIG_ARCH_LS1012A)
+	clock = sys_info.freq_systembus;
+#elif defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	clock = sys_info.freq_cga_m2;
+#endif
+	gd->arch.sdhc_per_clk = clock / CONFIG_SYS_FSL_SDHC_CLK_DIV;
+	gd->arch.sdhc_clk = gd->bus_clk / CONFIG_SYS_FSL_SDHC_CLK_DIV;
+#endif
+	if (gd->cpu_clk != 0)
+		return 0;
+	else
+		return 1;
+}
+
+/********************************************
+ * get_bus_freq
+ * return platform clock in Hz
+ *********************************************/
+ulong get_bus_freq(ulong dummy)
+{
+	if (!gd->bus_clk)
+		get_clocks();
+
+	return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+	if (!gd->mem_clk)
+		get_clocks();
+
+	return gd->mem_clk;
+}
+
+int get_serial_clock(void)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_DUART_CLK_DIV;
+}
+
+int get_i2c_freq(ulong dummy)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_I2C_CLK_DIV;
+}
+
+int get_dspi_freq(ulong dummy)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_DSPI_CLK_DIV;
+}
+
+#ifdef CONFIG_FSL_LPUART
+int get_uart_freq(ulong dummy)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_LPUART_CLK_DIV;
+}
+#endif
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_I2C_CLK:
+		return get_i2c_freq(0);
+	case MXC_DSPI_CLK:
+		return get_dspi_freq(0);
+#ifdef CONFIG_FSL_LPUART
+	case MXC_UART_CLK:
+		return get_uart_freq(0);
+#endif
+	default:
+		printf("Unsupported clock\n");
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
new file mode 100644
index 000000000..fad7a9356
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -0,0 +1,665 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016-2018, 2020 NXP
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <env.h>
+#include <log.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
+
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+int xfi_dpmac[XFI14 + 1];
+int sgmii_dpmac[SGMII18 + 1];
+int a25gaui_dpmac[_25GE10 + 1];
+int xlaui_dpmac[_40GE2 + 1];
+int caui2_dpmac[_50GE2 + 1];
+int caui4_dpmac[_100GE2 + 1];
+#else
+int xfi_dpmac[XFI8 + 1];
+int sgmii_dpmac[SGMII16 + 1];
+#endif
+#endif
+
+__weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
+{
+	return;
+}
+
+/*
+ *The return value of this func is the serdes protocol used.
+ *Typically this function is called number of times depending
+ *upon the number of serdes blocks in the Silicon.
+ *Zero is used to denote that no serdes was enabled,
+ *this is the case when golden RCW was used where DPAA2 bring was
+ *intentionally removed to achieve boot to prompt
+*/
+
+__weak int serdes_get_number(int serdes, int cfg)
+{
+	return cfg;
+}
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	int ret = 0;
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	if (!serdes1_prtcl_map[NONE])
+		fsl_serdes_init();
+
+	ret |= serdes1_prtcl_map[device];
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	if (!serdes2_prtcl_map[NONE])
+		fsl_serdes_init();
+
+	ret |= serdes2_prtcl_map[device];
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	if (!serdes3_prtcl_map[NONE])
+		fsl_serdes_init();
+
+	ret |= serdes3_prtcl_map[device];
+#endif
+
+	return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg = 0;
+	int i;
+
+	switch (sd) {
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	case FSL_SRDS_1:
+		cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]);
+		cfg &= FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+		break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	case FSL_SRDS_2:
+		cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
+		cfg &= FSL_CHASSIS3_SRDS2_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS3_SRDS2_PRTCL_SHIFT;
+		break;
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	case NXP_SRDS_3:
+		cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]);
+		cfg &= FSL_CHASSIS3_SRDS3_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS3_SRDS3_PRTCL_SHIFT;
+		break;
+#endif
+	default:
+		printf("invalid SerDes%d\n", sd);
+		break;
+	}
+
+	cfg = serdes_get_number(sd, cfg);
+
+	/* Is serdes enabled at all? */
+	if (cfg == 0)
+		return -ENODEV;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_get_prtcl(sd, cfg, i) == device)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
+		 u32 sd_prctl_shift, u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg;
+	int lane;
+
+	if (serdes_prtcl_map[NONE])
+		return;
+
+	memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
+
+	cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask;
+	cfg >>= sd_prctl_shift;
+
+	cfg = serdes_get_number(sd, cfg);
+	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
+
+	if (!is_serdes_prtcl_valid(sd, cfg))
+		printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+		if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
+			debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
+		else {
+			serdes_prtcl_map[lane_prtcl] = 1;
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+			if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14)
+				wriop_init_dpmac(sd, xfi_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= SGMII1 && lane_prtcl <= SGMII18)
+				wriop_init_dpmac(sd, sgmii_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= _25GE1 && lane_prtcl <= _25GE10)
+				wriop_init_dpmac(sd, a25gaui_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= _40GE1 && lane_prtcl <= _40GE2)
+				wriop_init_dpmac(sd, xlaui_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= _50GE1 && lane_prtcl <= _50GE2)
+				wriop_init_dpmac(sd, caui2_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+			if (lane_prtcl >= _100GE1 && lane_prtcl <= _100GE2)
+				wriop_init_dpmac(sd, caui4_dpmac[lane_prtcl],
+						 (int)lane_prtcl);
+
+#else
+			switch (lane_prtcl) {
+			case QSGMII_A:
+			case QSGMII_B:
+			case QSGMII_C:
+			case QSGMII_D:
+				wriop_init_dpmac_qsgmii(sd, (int)lane_prtcl);
+				break;
+			default:
+				if (lane_prtcl >= XFI1 && lane_prtcl <= XFI8)
+					wriop_init_dpmac(sd,
+							 xfi_dpmac[lane_prtcl],
+							 (int)lane_prtcl);
+
+				 if (lane_prtcl >= SGMII1 &&
+				     lane_prtcl <= SGMII16)
+					wriop_init_dpmac(sd, sgmii_dpmac[
+							 lane_prtcl],
+							 (int)lane_prtcl);
+				break;
+			}
+#endif
+#endif
+		}
+	}
+
+	/* Set the first element to indicate serdes has been initialized */
+	serdes_prtcl_map[NONE] = 1;
+}
+
+__weak int get_serdes_volt(void)
+{
+	return -1;
+}
+
+__weak int set_serdes_volt(int svdd)
+{
+	return -1;
+}
+
+#define LNAGCR0_RT_RSTB		0x00600000
+
+#define RSTCTL_RESET_MASK	0x000000E0
+
+#define RSTCTL_RSTREQ		0x80000000
+#define RSTCTL_RST_DONE		0x40000000
+#define RSTCTL_RSTERR		0x20000000
+
+#define RSTCTL_SDEN		0x00000020
+#define RSTCTL_SDRST_B		0x00000040
+#define RSTCTL_PLLRST_B		0x00000080
+
+#define TCALCR_CALRST_B		0x08000000
+
+struct serdes_prctl_info {
+	u32 id;
+	u32 mask;
+	u32 shift;
+};
+
+struct serdes_prctl_info srds_prctl_info[] = {
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	{.id = 1,
+	 .mask = FSL_CHASSIS3_SRDS1_PRTCL_MASK,
+	 .shift = FSL_CHASSIS3_SRDS1_PRTCL_SHIFT
+	},
+
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	{.id = 2,
+	 .mask = FSL_CHASSIS3_SRDS2_PRTCL_MASK,
+	 .shift = FSL_CHASSIS3_SRDS2_PRTCL_SHIFT
+	},
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	{.id = 3,
+	 .mask = FSL_CHASSIS3_SRDS3_PRTCL_MASK,
+	 .shift = FSL_CHASSIS3_SRDS3_PRTCL_SHIFT
+	},
+#endif
+	{} /* NULL ENTRY */
+};
+
+static int get_serdes_prctl_info_idx(u32 serdes_id)
+{
+	int pos = 0;
+	struct serdes_prctl_info *srds_info;
+
+	/* loop until NULL ENTRY defined by .id=0 */
+	for (srds_info = srds_prctl_info; srds_info->id != 0;
+	     srds_info++, pos++) {
+		if (srds_info->id == serdes_id)
+			return pos;
+	}
+
+	return -1;
+}
+
+static void do_enabled_lanes_reset(u32 serdes_id, u32 cfg,
+				   struct ccsr_serdes __iomem *serdes_base,
+				   bool cmplt)
+{
+	int i, pos;
+	u32 cfg_tmp;
+
+	pos = get_serdes_prctl_info_idx(serdes_id);
+	if (pos == -1) {
+		printf("invalid serdes_id %d\n", serdes_id);
+		return;
+	}
+
+	cfg_tmp = cfg & srds_prctl_info[pos].mask;
+	cfg_tmp >>= srds_prctl_info[pos].shift;
+
+	for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
+		if (cmplt)
+			setbits_le32(&serdes_base->lane[i].gcr0,
+				     LNAGCR0_RT_RSTB);
+		else
+			clrbits_le32(&serdes_base->lane[i].gcr0,
+				     LNAGCR0_RT_RSTB);
+	}
+}
+
+static void do_pll_reset(u32 cfg,
+			 struct ccsr_serdes __iomem *serdes_base)
+{
+	int i;
+
+	for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
+		clrbits_le32(&serdes_base->bank[i].rstctl,
+			     RSTCTL_RESET_MASK);
+		udelay(1);
+
+		setbits_le32(&serdes_base->bank[i].rstctl,
+			     RSTCTL_RSTREQ);
+	}
+	udelay(1);
+}
+
+static void do_rx_tx_cal_reset(struct ccsr_serdes __iomem *serdes_base)
+{
+	clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
+	clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
+}
+
+static void do_rx_tx_cal_reset_comp(u32 cfg, int i,
+				    struct ccsr_serdes __iomem *serdes_base)
+{
+	if (!(cfg == 0x3 && i == 1)) {
+		udelay(1);
+		setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
+		setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
+	}
+	udelay(1);
+}
+
+static void do_pll_reset_done(u32 cfg,
+			      struct ccsr_serdes __iomem *serdes_base)
+{
+	int i;
+	u32 reg = 0;
+
+	for (i = 0; i < 2; i++) {
+		reg = in_le32(&serdes_base->bank[i].pllcr0);
+		if (!(cfg & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
+			setbits_le32(&serdes_base->bank[i].rstctl,
+				     RSTCTL_RST_DONE);
+		}
+	}
+}
+
+static void do_serdes_enable(u32 cfg,
+			     struct ccsr_serdes __iomem *serdes_base)
+{
+	int i;
+
+	for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
+		setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_SDEN);
+		udelay(1);
+
+		setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_PLLRST_B);
+		udelay(1);
+		/* Take the Rx/Tx calibration out of reset */
+		do_rx_tx_cal_reset_comp(cfg, i, serdes_base);
+	}
+}
+
+static void do_pll_lock(u32 cfg,
+			struct ccsr_serdes __iomem *serdes_base)
+{
+	int i;
+	u32 reg = 0;
+
+	for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
+		/* if the PLL is not locked, set RST_ERR */
+		reg = in_le32(&serdes_base->bank[i].pllcr0);
+		if (!((reg >> 23) & 0x1)) {
+			setbits_le32(&serdes_base->bank[i].rstctl,
+				     RSTCTL_RSTERR);
+		} else {
+			udelay(1);
+			setbits_le32(&serdes_base->bank[i].rstctl,
+				     RSTCTL_SDRST_B);
+			udelay(1);
+		}
+	}
+}
+
+int setup_serdes_volt(u32 svdd)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_serdes __iomem *serdes1_base =
+			(void *)CONFIG_SYS_FSL_LSCH3_SERDES_ADDR;
+	u32 cfg_rcwsrds1 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]);
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	struct ccsr_serdes __iomem *serdes2_base =
+			(void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000);
+	u32 cfg_rcwsrds2 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	struct ccsr_serdes __iomem *serdes3_base =
+			(void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x20000);
+	u32 cfg_rcwsrds3 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]);
+#endif
+	u32 cfg_tmp;
+	int svdd_cur, svdd_tar;
+	int ret = 1;
+
+	/* Only support switch SVDD to 900mV */
+	if (svdd != 900)
+		return -EINVAL;
+
+	/* Scale up to the LTC resolution is 1/4096V */
+	svdd = (svdd * 4096) / 1000;
+
+	svdd_tar = svdd;
+	svdd_cur = get_serdes_volt();
+	if (svdd_cur < 0)
+		return -EINVAL;
+
+	debug("%s: current SVDD: %x; target SVDD: %x\n",
+	      __func__, svdd_cur, svdd_tar);
+	if (svdd_cur == svdd_tar)
+		return 0;
+
+	/* Put the all enabled lanes in reset */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, false);
+#endif
+
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, false);
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	do_enabled_lanes_reset(3, cfg_rcwsrds3, serdes3_base, false);
+#endif
+
+	/* Put the all enabled PLL in reset */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = cfg_rcwsrds1 & 0x3;
+	do_pll_reset(cfg_tmp, serdes1_base);
+#endif
+
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = cfg_rcwsrds1 & 0xC;
+	cfg_tmp >>= 2;
+	do_pll_reset(cfg_tmp, serdes2_base);
+#endif
+
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	cfg_tmp = cfg_rcwsrds3 & 0x30;
+	cfg_tmp >>= 4;
+	do_pll_reset(cfg_tmp, serdes3_base);
+#endif
+
+	/* Put the Rx/Tx calibration into reset */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	do_rx_tx_cal_reset(serdes1_base);
+#endif
+
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	do_rx_tx_cal_reset(serdes2_base);
+#endif
+
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	do_rx_tx_cal_reset(serdes3_base);
+#endif
+
+	ret = set_serdes_volt(svdd);
+	if (ret < 0) {
+		printf("could not change SVDD\n");
+		ret = -1;
+	}
+
+	/* For each PLL that’s not disabled via RCW enable the SERDES */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = cfg_rcwsrds1 & 0x3;
+	do_serdes_enable(cfg_tmp, serdes1_base);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = cfg_rcwsrds1 & 0xC;
+	cfg_tmp >>= 2;
+	do_serdes_enable(cfg_tmp, serdes2_base);
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	cfg_tmp = cfg_rcwsrds3 & 0x30;
+	cfg_tmp >>= 4;
+	do_serdes_enable(cfg_tmp, serdes3_base);
+#endif
+
+	/* Wait for at at least 625us, ensure the PLLs being reset are locked */
+	udelay(800);
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = cfg_rcwsrds1 & 0x3;
+	do_pll_lock(cfg_tmp, serdes1_base);
+#endif
+
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = cfg_rcwsrds1 & 0xC;
+	cfg_tmp >>= 2;
+	do_pll_lock(cfg_tmp, serdes2_base);
+#endif
+
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	cfg_tmp = cfg_rcwsrds3 & 0x30;
+	cfg_tmp >>= 4;
+	do_pll_lock(cfg_tmp, serdes3_base);
+#endif
+
+	/* Take the all enabled lanes out of reset */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, true);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, true);
+#endif
+
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	do_enabled_lanes_reset(3, cfg_rcwsrds3, serdes3_base, true);
+#endif
+
+	/* For each PLL being reset, and achieved PLL lock set RST_DONE */
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	cfg_tmp = cfg_rcwsrds1 & 0x3;
+	do_pll_reset_done(cfg_tmp, serdes1_base);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	cfg_tmp = cfg_rcwsrds1 & 0xC;
+	cfg_tmp >>= 2;
+	do_pll_reset_done(cfg_tmp, serdes2_base);
+#endif
+
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	cfg_tmp = cfg_rcwsrds3 & 0x30;
+	cfg_tmp >>= 4;
+	do_pll_reset_done(cfg_tmp, serdes3_base);
+#endif
+
+	return ret;
+}
+
+void fsl_serdes_init(void)
+{
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+	int i , j;
+
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+	for (i = XFI1, j = 1; i <= XFI14; i++, j++)
+		xfi_dpmac[i] = j;
+
+	for (i = SGMII1, j = 1; i <= SGMII18; i++, j++)
+		sgmii_dpmac[i] = j;
+
+	for (i = _25GE1, j = 1; i <= _25GE10; i++, j++)
+		a25gaui_dpmac[i] = j;
+
+	for (i = _40GE1, j = 1; i <= _40GE2; i++, j++)
+		xlaui_dpmac[i] = j;
+
+	for (i = _50GE1, j = 1; i <= _50GE2; i++, j++)
+		caui2_dpmac[i] = j;
+
+	for (i = _100GE1, j = 1; i <= _100GE2; i++, j++)
+		caui4_dpmac[i] = j;
+#else
+	for (i = XFI1, j = 1; i <= XFI8; i++, j++)
+		xfi_dpmac[i] = j;
+
+	for (i = SGMII1, j = 1; i <= SGMII16; i++, j++)
+		sgmii_dpmac[i] = j;
+#endif
+#endif
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	serdes_init(FSL_SRDS_1,
+		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR,
+		    FSL_CHASSIS3_SRDS1_REGSR,
+		    FSL_CHASSIS3_SRDS1_PRTCL_MASK,
+		    FSL_CHASSIS3_SRDS1_PRTCL_SHIFT,
+		    serdes1_prtcl_map);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	serdes_init(FSL_SRDS_2,
+		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + FSL_SRDS_2 * 0x10000,
+		    FSL_CHASSIS3_SRDS2_REGSR,
+		    FSL_CHASSIS3_SRDS2_PRTCL_MASK,
+		    FSL_CHASSIS3_SRDS2_PRTCL_SHIFT,
+		    serdes2_prtcl_map);
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	serdes_init(NXP_SRDS_3,
+		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + NXP_SRDS_3 * 0x10000,
+		    FSL_CHASSIS3_SRDS3_REGSR,
+		    FSL_CHASSIS3_SRDS3_PRTCL_MASK,
+		    FSL_CHASSIS3_SRDS3_PRTCL_SHIFT,
+		    serdes3_prtcl_map);
+#endif
+}
+
+int serdes_set_env(int sd, int rcwsr, int sd_prctl_mask, int sd_prctl_shift)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	char scfg[16], snum[16];
+	int cfgr = 0;
+	u32 cfg;
+
+	cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask;
+	cfg >>= sd_prctl_shift;
+	cfg = serdes_get_number(sd, cfg);
+
+#if defined(SRDS_BITS_PER_LANE)
+	/*
+	 * reverse lanes, lane 0 should be printed first so it must be moved to
+	 * high order bits.
+	 * For example bb58 should read 85bb, lane 0 being protocol 8.
+	 * This only applies to SoCs that define SRDS_BITS_PER_LANE and have
+	 * independent per-lane protocol configuration, at this time LS1028A and
+	 * LS1088A. LS2 and LX2 SoCs encode the full protocol mix across all
+	 * lanes as a single value.
+	 */
+	for (int i = 0; i < SRDS_MAX_LANES; i++) {
+		int tmp;
+
+		tmp = cfg >> (i * SRDS_BITS_PER_LANE);
+		tmp &= GENMASK(SRDS_BITS_PER_LANE - 1, 0);
+		tmp <<= (SRDS_MAX_LANES - i - 1) * SRDS_BITS_PER_LANE;
+		cfgr |= tmp;
+	}
+#endif /* SRDS_BITS_PER_LANE */
+
+	snprintf(snum, 16, "serdes%d", sd);
+	snprintf(scfg, 16, "%x", cfgr);
+	env_set(snum, scfg);
+
+	return 0;
+}
+
+int serdes_misc_init(void)
+{
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	serdes_set_env(FSL_SRDS_1, FSL_CHASSIS3_SRDS1_REGSR,
+		       FSL_CHASSIS3_SRDS1_PRTCL_MASK,
+		       FSL_CHASSIS3_SRDS1_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	serdes_set_env(FSL_SRDS_2, FSL_CHASSIS3_SRDS2_REGSR,
+		       FSL_CHASSIS3_SRDS2_PRTCL_MASK,
+		       FSL_CHASSIS3_SRDS2_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+	serdes_set_env(NXP_SRDS_3, FSL_CHASSIS3_SRDS3_REGSR,
+		       FSL_CHASSIS3_SRDS3_PRTCL_MASK,
+		       FSL_CHASSIS3_SRDS3_PRTCL_SHIFT);
+#endif
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
new file mode 100644
index 000000000..25a1c36d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014-2015, Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
+ *
+ * Derived from arch/power/cpu/mpc85xx/speed.c
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <cpu_func.h>
+#include <asm/global_data.h>
+#include <linux/compiler.h>
+#include <fsl_ifc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/soc.h>
+#include "cpu.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	6
+#endif
+
+
+void get_sys_info(struct sys_info *sys_info)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_clk_cluster_group __iomem *clk_grp[2] = {
+		(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR),
+		(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR)
+	};
+	struct ccsr_clk_ctrl __iomem *clk_ctrl =
+		(void *)(CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR);
+	unsigned int cpu;
+	const u8 core_cplx_pll[16] = {
+		[0] = 0,	/* CC1 PPL / 1 */
+		[1] = 0,	/* CC1 PPL / 2 */
+		[2] = 0,	/* CC1 PPL / 4 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 1,	/* CC2 PPL / 2 */
+		[6] = 1,	/* CC2 PPL / 4 */
+		[8] = 2,	/* CC3 PPL / 1 */
+		[9] = 2,	/* CC3 PPL / 2 */
+		[10] = 2,	/* CC3 PPL / 4 */
+		[12] = 3,	/* CC4 PPL / 1 */
+		[13] = 3,	/* CC4 PPL / 2 */
+		[14] = 3,	/* CC4 PPL / 4 */
+	};
+
+	const u8 core_cplx_pll_div[16] = {
+		[0] = 1,	/* CC1 PPL / 1 */
+		[1] = 2,	/* CC1 PPL / 2 */
+		[2] = 4,	/* CC1 PPL / 4 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 2,	/* CC2 PPL / 2 */
+		[6] = 4,	/* CC2 PPL / 4 */
+		[8] = 1,	/* CC3 PPL / 1 */
+		[9] = 2,	/* CC3 PPL / 2 */
+		[10] = 4,	/* CC3 PPL / 4 */
+		[12] = 1,	/* CC4 PPL / 1 */
+		[13] = 2,	/* CC4 PPL / 2 */
+		[14] = 4,	/* CC4 PPL / 4 */
+	};
+
+	uint i, cluster;
+#if defined(CONFIG_ARCH_LS1028A) || defined(CONFIG_ARCH_LS1088A)
+	uint rcw_tmp;
+#endif
+	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+	int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
+	u32 c_pll_sel, cplx_pll;
+	void *offset;
+
+	sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ;
+#endif
+#else
+	sys_info->freq_ddrbus = sysclk;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	sys_info->freq_ddrbus2 = sysclk;
+#endif
+#endif
+
+	/* The freq_systembus is used to record frequency of platform PLL */
+	sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >>
+			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT) &
+			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK;
+	sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
+			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
+			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	if (soc_has_dp_ddr()) {
+		sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
+			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) &
+			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK;
+	} else {
+		sys_info->freq_ddrbus2 = 0;
+	}
+#endif
+
+	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
+		/*
+		 * fixme: prefer to combine the following into one line, but
+		 * cannot pass compiling without warning about in_le32.
+		 */
+		offset = (void *)((size_t)clk_grp[i/3] +
+			 offsetof(struct ccsr_clk_cluster_group,
+				  pllngsr[i%3].gsr));
+		ratio[i] = (in_le32(offset) >> 1) & 0x3f;
+		freq_c_pll[i] = sysclk * ratio[i];
+	}
+
+	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+		cluster = fsl_qoriq_core_to_cluster(cpu);
+		c_pll_sel = (in_le32(&clk_ctrl->clkcncsr[cluster].csr) >> 27)
+			    & 0xf;
+		cplx_pll = core_cplx_pll[c_pll_sel];
+		cplx_pll += cc_group[cluster] - 1;
+		sys_info->freq_processor[cpu] =
+			freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+	}
+
+#if defined(CONFIG_FSL_IFC)
+	sys_info->freq_localbus = sys_info->freq_systembus /
+						CONFIG_SYS_FSL_IFC_CLK_DIV;
+#endif
+
+#if defined(CONFIG_ARCH_LS1028A) || defined(CONFIG_ARCH_LS1088A)
+#define HWA_CGA_M2_CLK_SEL      0x00380000
+#define HWA_CGA_M2_CLK_SHIFT    19
+	rcw_tmp = in_le32(&gur->rcwsr[5]);
+	switch ((rcw_tmp & HWA_CGA_M2_CLK_SEL) >> HWA_CGA_M2_CLK_SHIFT) {
+	case 1:
+		sys_info->freq_cga_m2 = freq_c_pll[1];
+		break;
+	case 2:
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 2;
+		break;
+	case 3:
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 3;
+		break;
+	case 4:
+		sys_info->freq_cga_m2 = freq_c_pll[1] / 4;
+		break;
+	case 6:
+		sys_info->freq_cga_m2 = freq_c_pll[0] / 2;
+		break;
+	case 7:
+		sys_info->freq_cga_m2 = freq_c_pll[0] / 3;
+		break;
+	default:
+		printf("Error: Unknown peripheral clock select!\n");
+		break;
+	}
+#endif
+}
+
+int get_clocks(void)
+{
+	struct sys_info sys_info;
+#ifdef CONFIG_FSL_ESDHC
+	u32 clock = 0;
+#endif
+	get_sys_info(&sys_info);
+	gd->cpu_clk = sys_info.freq_processor[0];
+	gd->bus_clk = sys_info.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV;
+	gd->mem_clk = sys_info.freq_ddrbus;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	gd->arch.mem2_clk = sys_info.freq_ddrbus2;
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+#if defined(CONFIG_ARCH_LS1028A) || defined(CONFIG_ARCH_LS1088A)
+	clock = sys_info.freq_cga_m2;
+#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2162A)
+	clock = sys_info.freq_systembus;
+#endif
+	gd->arch.sdhc_per_clk = clock / CONFIG_SYS_FSL_SDHC_CLK_DIV;
+	gd->arch.sdhc_clk = gd->bus_clk / CONFIG_SYS_FSL_SDHC_CLK_DIV;
+#endif
+
+	if (gd->cpu_clk != 0)
+		return 0;
+	else
+		return 1;
+}
+
+/********************************************
+ * get_bus_freq
+ * return platform clock in Hz
+ *********************************************/
+ulong get_bus_freq(ulong dummy)
+{
+	if (!gd->bus_clk)
+		get_clocks();
+
+	return gd->bus_clk;
+}
+
+/********************************************
+ * get_ddr_freq
+ * return ddr bus freq in Hz
+ *********************************************/
+ulong get_ddr_freq(ulong ctrl_num)
+{
+	if (!gd->mem_clk)
+		get_clocks();
+
+	/*
+	 * DDR controller 0 & 1 are on memory complex 0
+	 * DDR controller 2 is on memory complext 1
+	 */
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	if (ctrl_num >= 2)
+		return gd->arch.mem2_clk;
+#endif
+
+	return gd->mem_clk;
+}
+
+int get_i2c_freq(ulong dummy)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_I2C_CLK_DIV;
+}
+
+int get_dspi_freq(ulong dummy)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_DSPI_CLK_DIV;
+}
+
+int get_serial_clock(void)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_DUART_CLK_DIV;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_I2C_CLK:
+		return get_i2c_freq(0);
+	case MXC_DSPI_CLK:
+		return get_dspi_freq(0);
+	default:
+		printf("Unsupported clock\n");
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/icid.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/icid.c
new file mode 100644
index 000000000..82c5a8b12
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/icid.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <fsl_fman.h>
+
+static void set_icid(struct icid_id_table *tbl, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (tbl[i].le)
+			out_le32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+		else
+			out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+}
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+void set_fman_icids(struct fman_icid_id_table *tbl, int size)
+{
+	int i;
+	ccsr_fman_t *fm = (void *)CONFIG_SYS_FSL_FM1_ADDR;
+
+	for (i = 0; i < size; i++) {
+		out_be32(&fm->fm_bmi_common.fmbm_ppid[tbl[i].port_id - 1],
+			 tbl[i].icid);
+	}
+}
+#endif
+
+void set_icids(void)
+{
+	/* setup general icid offsets */
+	set_icid(icid_tbl, icid_tbl_sz);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	set_fman_icids(fman_icid_tbl, fman_icid_tbl_sz);
+#endif
+}
+
+int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids)
+{
+	int i, ret;
+	u32 prop[8];
+
+	/*
+	 * Note: The "iommus" property definition mentions Stream IDs while
+	 * this code handles ICIDs. The current implementation assumes that
+	 * ICIDs and Stream IDs are equal.
+	 */
+	for (i = 0; i < num_ids; i++) {
+		prop[i * 2] = cpu_to_fdt32(smmu_ph);
+		prop[i * 2 + 1] = cpu_to_fdt32(ids[i]);
+	}
+	ret = fdt_setprop(blob, off, "iommus",
+			  prop, sizeof(u32) * num_ids * 2);
+	if (ret) {
+		printf("WARNING unable to set iommus: %s\n", fdt_strerror(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
+int fdt_fixup_icid_tbl(void *blob, int smmu_ph,
+		       struct icid_id_table *tbl, int size)
+{
+	int i, err, off;
+
+	for (i = 0; i < size; i++) {
+		if (!tbl[i].compat)
+			continue;
+
+		off = fdt_node_offset_by_compat_reg(blob,
+						    tbl[i].compat,
+						    tbl[i].compat_addr);
+		if (off > 0) {
+			err = fdt_set_iommu_prop(blob, off, smmu_ph,
+						 &tbl[i].id, 1);
+			if (err)
+				return err;
+		} else {
+			printf("WARNING could not find node %s: %s.\n",
+			       tbl[i].compat, fdt_strerror(off));
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+int get_fman_port_icid(int port_id, struct fman_icid_id_table *tbl,
+		       const int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++) {
+		if (tbl[i].port_id == port_id)
+			return tbl[i].icid;
+	}
+
+	return -1;
+}
+
+void fdt_fixup_fman_port_icid_by_compat(void *blob, int smmu_ph,
+					const char *compat)
+{
+	int noff, len, icid;
+	const u32 *prop;
+
+	noff = fdt_node_offset_by_compatible(blob, -1, compat);
+	while (noff > 0) {
+		prop = fdt_getprop(blob, noff, "cell-index", &len);
+		if (!prop) {
+			printf("WARNING missing cell-index for fman port\n");
+			continue;
+		}
+		if (len != 4) {
+			printf("WARNING bad cell-index size for fman port\n");
+			continue;
+		}
+
+		icid = get_fman_port_icid(fdt32_to_cpu(*prop),
+					  fman_icid_tbl, fman_icid_tbl_sz);
+		if (icid < 0) {
+			printf("WARNING unknown ICID for fman port %d\n",
+			       *prop);
+			continue;
+		}
+
+		fdt_set_iommu_prop(blob, noff, smmu_ph, (u32 *)&icid, 1);
+
+		noff = fdt_node_offset_by_compatible(blob, noff, compat);
+	}
+}
+
+void fdt_fixup_fman_icids(void *blob, int smmu_ph)
+{
+	static const char * const compats[] = {
+		"fsl,fman-v3-port-oh",
+		"fsl,fman-v3-port-rx",
+		"fsl,fman-v3-port-tx",
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(compats); i++)
+		fdt_fixup_fman_port_icid_by_compat(blob, smmu_ph, compats[i]);
+}
+#endif
+
+int fdt_get_smmu_phandle(void *blob)
+{
+	int noff, smmu_ph;
+
+	noff = fdt_node_offset_by_compatible(blob, -1, "arm,mmu-500");
+	if (noff < 0) {
+		printf("WARNING failed to get smmu node: %s\n",
+		       fdt_strerror(noff));
+		return noff;
+	}
+
+	smmu_ph = fdt_get_phandle(blob, noff);
+	if (!smmu_ph) {
+		smmu_ph = fdt_create_phandle(blob, noff);
+		if (!smmu_ph) {
+			printf("WARNING failed to get smmu phandle\n");
+			return -1;
+		}
+	}
+
+	return smmu_ph;
+}
+
+void fdt_fixup_icid(void *blob)
+{
+	int smmu_ph;
+
+	smmu_ph = fdt_get_smmu_phandle(blob);
+	if (smmu_ph < 0)
+		return;
+
+	fdt_fixup_icid_tbl(blob, smmu_ph, icid_tbl, icid_tbl_sz);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_icids(blob, smmu_ph);
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
new file mode 100644
index 000000000..d8803738f
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -0,0 +1,430 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014-2015 Freescale Semiconductor
+ * Copyright 2019 NXP
+ *
+ * Extracted from armv8/start.S
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/gic.h>
+#include <asm/macro.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#ifdef CONFIG_FSL_LSCH3
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#endif
+#include <asm/u-boot.h>
+
+	.align 3
+	.weak secondary_boot_addr
+secondary_boot_addr:
+	.quad 0
+
+/* Get GIC offset
+* For LS1043a rev1.0, GIC base address align with 4k.
+* For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT]
+* is set, GIC base address align with 4K, or else align
+* with 64k.
+* output:
+*	x0: the base address of GICD
+*	x1: the base address of GICC
+*/
+ENTRY(get_gic_offset)
+	ldr     x0, =GICD_BASE
+#ifdef CONFIG_GICV2
+	ldr     x1, =GICC_BASE
+#endif
+#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
+	ldr     x2, =DCFG_CCSR_SVR
+	ldr	w2, [x2]
+	rev	w2, w2
+	lsr	w3, w2, #16
+	ldr	w4, =SVR_DEV(SVR_LS1043A)
+	cmp	w3, w4
+	b.ne	1f
+	ands	w2, w2, #0xff
+	cmp	w2, #REV1_0
+	b.eq	1f
+	ldr	x2, =SCFG_GIC400_ALIGN
+	ldr	w2, [x2]
+	rev	w2, w2
+	tbnz	w2, #GIC_ADDR_BIT, 1f
+	ldr     x0, =GICD_BASE_64K
+#ifdef CONFIG_GICV2
+	ldr     x1, =GICC_BASE_64K
+#endif
+1:
+#endif
+	ret
+ENDPROC(get_gic_offset)
+
+ENTRY(smp_kick_all_cpus)
+	/* Kick secondary cpus up by SGI 0 interrupt */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	mov	x29, lr			/* Save LR */
+	bl	get_gic_offset
+	bl	gic_kick_secondary_cpus
+	mov	lr, x29			/* Restore LR */
+#endif
+	ret
+ENDPROC(smp_kick_all_cpus)
+
+
+ENTRY(lowlevel_init)
+	mov	x29, lr			/* Save LR */
+
+	/* unmask SError and abort */
+	msr daifclr, #4
+
+	/* Set HCR_EL2[AMO] so SError @EL2 is taken */
+	mrs	x0, hcr_el2
+	orr	x0, x0, #0x20			/* AMO */
+	msr	hcr_el2, x0
+	isb
+
+	switch_el x1, 1f, 100f, 100f	/* skip if not in EL3 */
+1:
+
+#if defined (CONFIG_SYS_FSL_HAS_CCN504)
+
+	/* Set Wuo bit for RN-I 20 */
+#ifdef CONFIG_ARCH_LS2080A
+	ldr	x0, =CCI_AUX_CONTROL_BASE(20)
+	ldr	x1, =0x00000010
+	bl	ccn504_set_aux
+
+	/*
+	 * Set forced-order mode in RNI-6, RNI-20
+	 * This is required for performance optimization on LS2088A
+	 * LS2080A family does not support setting forced-order mode,
+	 * so skip this operation for LS2080A family
+	 */
+	bl	get_svr
+	lsr	w0, w0, #16
+	ldr	w1, =SVR_DEV(SVR_LS2080A)
+	cmp	w0, w1
+	b.eq	1f
+
+	ldr	x0, =CCI_AUX_CONTROL_BASE(6)
+	ldr	x1, =0x00000020
+	bl	ccn504_set_aux
+	ldr	x0, =CCI_AUX_CONTROL_BASE(20)
+	ldr	x1, =0x00000020
+	bl	ccn504_set_aux
+1:
+#endif
+
+	/* Add fully-coherent masters to DVM domain */
+	ldr	x0, =CCI_MN_BASE
+	ldr	x1, =CCI_MN_RNF_NODEID_LIST
+	ldr	x2, =CCI_MN_DVM_DOMAIN_CTL_SET
+	bl	ccn504_add_masters_to_dvm
+
+	/* Set all RN-I ports to QoS of 15 */
+	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(0)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(0)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(0)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+
+	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(2)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(2)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(2)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+
+	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(6)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(6)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(6)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+
+	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(12)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(12)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(12)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+
+	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(16)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(16)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(16)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+
+	ldr	x0, =CCI_S0_QOS_CONTROL_BASE(20)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S1_QOS_CONTROL_BASE(20)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(20)
+	ldr	x1, =0x00FF000C
+	bl	ccn504_set_qos
+#endif /* CONFIG_SYS_FSL_HAS_CCN504 */
+
+#ifdef SMMU_BASE
+	/* Set the SMMU page size in the sACR register */
+	ldr	x1, =SMMU_BASE
+	ldr	w0, [x1, #0x10]
+	orr	w0, w0, #1 << 16  /* set sACR.pagesize to indicate 64K page */
+	str	w0, [x1, #0x10]
+#endif
+
+	/* Initialize GIC Secure Bank Status */
+#if !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	branch_if_slave x0, 1f
+	bl	get_gic_offset
+	bl	gic_init_secure
+1:
+#ifdef CONFIG_GICV3
+	ldr	x0, =GICR_BASE
+	bl	gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+	bl	get_gic_offset
+	bl	gic_init_secure_percpu
+#endif
+#endif
+#endif
+
+100:
+	branch_if_master x0, x1, 2f
+
+#if defined(CONFIG_MP) && defined(CONFIG_ARMV8_MULTIENTRY)
+	/*
+	 * Formerly, here was a jump to secondary_boot_func, but we just
+	 * return early here and let the generic code in start.S handle
+	 * the jump to secondary_boot_func.
+	 */
+	mov	lr, x29			/* Restore LR */
+	ret
+#endif
+
+2:
+	switch_el x1, 1f, 100f, 100f	/* skip if not in EL3 */
+1:
+#ifdef CONFIG_FSL_TZPC_BP147
+	/* Set Non Secure access for all devices protected via TZPC */
+	ldr	x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */
+	orr	w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */
+	str	w0, [x1]
+
+	isb
+	dsb	sy
+#endif
+
+#ifdef CONFIG_FSL_TZASC_400
+	/*
+	 * LS2080 and its personalities does not support TZASC
+	 * So skip TZASC related operations
+	 */
+	bl	get_svr
+	lsr	w0, w0, #16
+	ldr	w1, =SVR_DEV(SVR_LS2080A)
+	cmp	w0, w1
+	b.eq	1f
+
+	/* Set TZASC so that:
+	 * a. We use only Region0 whose global secure write/read is EN
+	 * b. We use only Region0 whose NSAID write/read is EN
+	 *
+	 * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
+	 * 	 placeholders.
+	 */
+
+.macro tzasc_prog, xreg
+
+	mov     x12, TZASC1_BASE
+	mov     x16, #0x10000
+	mul     x14, \xreg, x16
+	add     x14, x14,x12
+	mov 	x1, #0x8
+	add     x1, x1, x14
+
+	ldr     w0, [x1]		/* Filter 0 Gate Keeper Register */
+	orr     w0, w0, #1 << 0		/* Set open_request for Filter 0 */
+	str     w0, [x1]
+
+	mov	x1, #0x110
+	add     x1, x1, x14
+
+	ldr     w0, [x1]		/* Region-0 Attributes Register */
+	orr     w0, w0, #1 << 31	/* Set Sec global write en, Bit[31] */
+	orr     w0, w0, #1 << 30	/* Set Sec global read en, Bit[30] */
+	str     w0, [x1]
+
+	mov	x1, #0x114
+	add     x1, x1, x14
+
+	ldr     w0, [x1]		/* Region-0 Access Register */
+	mov     w0, #0xFFFFFFFF		/* Set nsaid_wr_en and nsaid_rd_en */
+	str     w0, [x1]
+.endm
+
+#ifdef CONFIG_FSL_TZASC_1
+	mov     x13, #0
+	tzasc_prog	x13
+
+#endif
+#ifdef CONFIG_FSL_TZASC_2
+	mov     x13, #1
+	tzasc_prog	x13
+
+#endif
+	isb
+	dsb	sy
+#endif
+100:
+1:
+#ifdef CONFIG_ARCH_LS1046A
+	switch_el x1, 1f, 100f, 100f	/* skip if not in EL3 */
+1:
+	/* Initialize the L2 RAM latency */
+	mrs   x1, S3_1_c11_c0_2
+	mov   x0, #0x1C7
+	/* Clear L2 Tag RAM latency and L2 Data RAM latency */
+	bic   x1, x1, x0
+	/* Set L2 data ram latency bits [2:0] */
+	orr   x1, x1, #0x2
+	/* set L2 tag ram latency bits [8:6] */
+	orr   x1,  x1, #0x80
+	msr   S3_1_c11_c0_2, x1
+	isb
+100:
+#endif
+
+#if !defined(CONFIG_TFABOOT) && \
+	(defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD))
+	bl	fsl_ocram_init
+#endif
+
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(lowlevel_init)
+
+#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)
+ENTRY(fsl_ocram_init)
+	mov	x28, lr			/* Save LR */
+	bl	fsl_clear_ocram
+	bl	fsl_ocram_clear_ecc_err
+	mov	lr, x28			/* Restore LR */
+	ret
+ENDPROC(fsl_ocram_init)
+
+ENTRY(fsl_clear_ocram)
+/* Clear OCRAM */
+	ldr	x0, =CONFIG_SYS_FSL_OCRAM_BASE
+	ldr	x1, =(CONFIG_SYS_FSL_OCRAM_BASE + CONFIG_SYS_FSL_OCRAM_SIZE)
+	mov	x2, #0
+clear_loop:
+	str	x2, [x0]
+	add	x0, x0, #8
+	cmp	x0, x1
+	b.lo	clear_loop
+	ret
+ENDPROC(fsl_clear_ocram)
+
+ENTRY(fsl_ocram_clear_ecc_err)
+	/* OCRAM1/2 ECC status bit */
+	mov	w1, #0x60
+	ldr	x0, =DCSR_DCFG_SBEESR2
+	str	w1, [x0]
+	ldr	x0, =DCSR_DCFG_MBEESR2
+	str	w1, [x0]
+	ret
+ENDPROC(fsl_ocram_init)
+#endif
+
+#ifdef CONFIG_FSL_LSCH3
+	.globl get_svr
+get_svr:
+	ldr	x1, =FSL_LSCH3_SVR
+	ldr	w0, [x1]
+	ret
+#endif
+
+#if defined(CONFIG_SYS_FSL_HAS_CCN504) || defined(CONFIG_SYS_FSL_HAS_CCN508)
+hnf_pstate_poll:
+	/* x0 has the desired status, return only if operation succeed
+	 * clobber x1, x2, x6
+	 */
+	mov	x1, x0
+	mov	w6, #8			/* HN-F node count */
+	mov	x0, #0x18
+	movk	x0, #0x420, lsl #16	/* HNF0_PSTATE_STATUS */
+1:
+	ldr	x2, [x0]
+	cmp	x2, x1			/* check status */
+	b.eq	2f
+	b	1b
+2:
+	add	x0, x0, #0x10000	/* move to next node */
+	subs	w6, w6, #1
+	cbnz	w6, 1b
+	ret
+
+hnf_set_pstate:
+	/* x0 has the desired state, clobber x1, x2, x6 */
+	mov	x1, x0
+	/* power state to SFONLY */
+	mov	w6, #8			/* HN-F node count */
+	mov	x0, #0x10
+	movk	x0, #0x420, lsl #16	/* HNF0_PSTATE_REQ */
+1:	/* set pstate to sfonly */
+	ldr	x2, [x0]
+	and	x2, x2, #0xfffffffffffffffc	/* & HNFPSTAT_MASK */
+	orr	x2, x2, x1
+	str	x2, [x0]
+	add	x0, x0, #0x10000	/* move to next node */
+	subs	w6, w6, #1
+	cbnz	w6, 1b
+
+	ret
+
+ENTRY(__asm_flush_l3_dcache)
+	/*
+	 * Return status in x0
+	 *    success 0
+	 */
+	mov	x29, lr
+
+	dsb	sy
+	mov	x0, #0x1		/* HNFPSTAT_SFONLY */
+	bl	hnf_set_pstate
+
+	mov	x0, #0x4		/* SFONLY status */
+	bl	hnf_pstate_poll
+
+	dsb	sy
+	mov	x0, #0x3		/* HNFPSTAT_FAM */
+	bl	hnf_set_pstate
+
+	mov	x0, #0xc		/* FAM status */
+	bl	hnf_pstate_poll
+
+	mov	x0, #0
+	mov	lr, x29
+	ret
+ENDPROC(__asm_flush_l3_dcache)
+#endif /* CONFIG_SYS_FSL_HAS_CCN504 */
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1012a_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1012a_serdes.c
new file mode 100644
index 000000000..8d7beca7d
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1012a_serdes.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_lsch2.h>
+
+struct serdes_config {
+	u32 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	{0x2208, {SGMII_2500_FM1_DTSEC1, SGMII_2500_FM1_DTSEC2, NONE, SATA1} },
+	{0x0008, {NONE, NONE, NONE, SATA1} },
+	{0x3508, {SGMII_FM1_DTSEC1, PCIE1, NONE, SATA1} },
+	{0x3305, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, NONE, PCIE1} },
+	{0x2205, {SGMII_2500_FM1_DTSEC1, SGMII_2500_FM1_DTSEC2, NONE, PCIE1} },
+	{0x2305, {SGMII_2500_FM1_DTSEC1, SGMII_FM1_DTSEC2, NONE, PCIE1} },
+	{0x9508, {TX_CLK, PCIE1, NONE, SATA1} },
+	{0x3905, {SGMII_FM1_DTSEC1, TX_CLK, NONE, PCIE1} },
+	{0x9305, {TX_CLK, SGMII_FM1_DTSEC2, NONE, PCIE1} },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
new file mode 100644
index 000000000..49df8b379
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+#include <log.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SDHC_ICID(1, FSL_SDMMC_STREAM_ID),
+	SET_SDHC_ICID(2, FSL_SDMMC2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,ls1028a-ahci", FSL_SATA1_STREAM_ID),
+	SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+	SET_QDMA_ICID("fsl,ls1028a-qdma", FSL_DMA_STREAM_ID),
+	SET_GPU_ICID("fsl,ls1028a-gpu", FSL_GPU_STREAM_ID),
+	SET_DISPLAY_ICID(FSL_DISPLAY_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
+
+/* integrated PCI is handled separately as it's not part of CCSR/SCFG */
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+
+#define ECAM_IERB_BASE		0x1f0800000ULL
+#define ECAM_IERB_OFFSET_NA	-1
+#define ECAM_IERB_FUNC_CNT	ARRAY_SIZE(ierb_offset)
+/* cache related transaction attributes for PCIe functions */
+#define ECAM_IERB_MSICAR		(ECAM_IERB_BASE + 0xa400)
+#define ECAM_IERB_MSICAR_VALUE		0x30
+
+/* offset of IERB config register per PCI function */
+static int ierb_offset[] = {
+	0x0800,
+	0x1800,
+	0x2800,
+	0x3800,
+	0x4800,
+	0x5800,
+	0x6800,
+	ECAM_IERB_OFFSET_NA,
+	0x0804,
+	0x0808,
+	0x1804,
+	0x1808,
+};
+
+/*
+ * Use a custom function for LS1028A, for now this is the only SoC with IERB
+ * and we're currently considering reorganizing IERB for future SoCs.
+ */
+void set_ecam_icids(void)
+{
+	int i;
+
+	out_le32(ECAM_IERB_MSICAR, ECAM_IERB_MSICAR_VALUE);
+
+	for (i = 0; i < ECAM_IERB_FUNC_CNT; i++) {
+		if (ierb_offset[i] == ECAM_IERB_OFFSET_NA)
+			continue;
+
+		out_le32(ECAM_IERB_BASE + ierb_offset[i],
+			 FSL_ECAM_STREAM_ID_START + i);
+	}
+}
+
+static int fdt_setprop_inplace_idx_u32(void *fdt, int nodeoffset,
+				       const char *name, uint32_t idx, u32 val)
+{
+	val = cpu_to_be32(val);
+	return fdt_setprop_inplace_namelen_partial(fdt, nodeoffset, name,
+						   strlen(name),
+						   idx * sizeof(val), &val,
+						   sizeof(val));
+}
+
+static int fdt_getprop_len(void *fdt, int nodeoffset, const char *name)
+{
+	int len;
+
+	if (fdt_getprop_namelen(fdt, nodeoffset, name, strlen(name), &len))
+		return len;
+
+	return 0;
+}
+
+void fdt_fixup_ecam(void *blob)
+{
+	int off;
+
+	off = fdt_node_offset_by_compatible(blob, 0, "pci-host-ecam-generic");
+	if (off < 0) {
+		debug("ECAM node not found\n");
+		return;
+	}
+
+	if (fdt_getprop_len(blob, off, "msi-map") != 16 ||
+	    fdt_getprop_len(blob, off, "iommu-map") != 16) {
+		log_err("invalid msi/iommu-map propertly size in ECAM node\n");
+		return;
+	}
+
+	fdt_setprop_inplace_idx_u32(blob, off, "msi-map", 2,
+				    FSL_ECAM_STREAM_ID_START);
+	fdt_setprop_inplace_idx_u32(blob, off, "msi-map", 3,
+				    ECAM_IERB_FUNC_CNT);
+
+	fdt_setprop_inplace_idx_u32(blob, off, "iommu-map", 2,
+				    FSL_ECAM_STREAM_ID_START);
+	fdt_setprop_inplace_idx_u32(blob, off, "iommu-map", 3,
+				    ECAM_IERB_FUNC_CNT);
+}
+#endif /* CONFIG_PCIE_ECAM_GENERIC */
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c
new file mode 100644
index 000000000..80d2910f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+
+struct serdes_config {
+	u32 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+	u8 rcw_lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0xCC5B, {PCIE1, QSGMII_B, PCIE2, PCIE2} },
+	{0xEB99, {SGMII1, SGMII1, PCIE2, SATA1} },
+	{0xCC99, {SGMII1, SGMII1, PCIE2, PCIE2} },
+	{0xBB99, {SGMII1, SGMII1, PCIE2, PCIE1} },
+	{0x9999, {SGMII1, SGMII2, SGMII3, SGMII4} },
+	{0xEBCC, {PCIE1, PCIE1, PCIE2, SATA1} },
+	{0xCCCC, {PCIE1, PCIE1, PCIE2, PCIE2} },
+	{0xDDDD, {PCIE1, PCIE1, PCIE1, PCIE1} },
+	{0xE031, {SXGMII1, QXGMII2, NONE, SATA1} },
+	{0xB991, {SXGMII1, SGMII1, SGMII2, PCIE1} },
+	{0xBB31, {SXGMII1, QXGMII2, PCIE2, PCIE1} },
+	{0xCC31, {SXGMII1, QXGMII2, PCIE2, PCIE2} },
+	{0xBB51, {SXGMII1, QSGMII_B, PCIE2, PCIE1} },
+	{0xBB38, {SGMII_T1, QXGMII2, PCIE2, PCIE1} },
+	{0xCC38, {SGMII_T1, QXGMII2, PCIE2, PCIE2} },
+	{0xBB58, {SGMII_T1, QSGMII_B, PCIE2, PCIE1} },
+	{0xCC58, {SGMII_T1, QSGMII_B, PCIE2, PCIE2} },
+	{0xCC8B, {PCIE1, SGMII_T1, PCIE2, PCIE2} },
+	{0xEB58, {SGMII_T1, QSGMII_B, PCIE2, SATA1} },
+	{0xEB8B, {PCIE1, SGMII_T1, PCIE2, SATA1} },
+	{0xE8CC, {PCIE1, PCIE1, SGMII_T1, SATA1} },
+	{0x7777, {SGMII1, SGMII2, SGMII3, SGMII4} },
+	{0x9999, {SGMII1, SGMII2, SGMII3, SGMII4} },
+	{0xb998, {SGMII_T1, SGMII2, SGMII3, PCIE1} },
+	{0xbb56, {SGMII_T1, QSGMII_B, PCIE2, PCIE1} },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
new file mode 100644
index 000000000..3bd993beb
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch2.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+#include <fsl_sec.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+};
+#endif
+
+struct icid_id_table icid_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START),
+	SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1),
+#endif
+
+	SET_SDHC_ICID(FSL_SDHC_STREAM_ID),
+
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID),
+
+	SET_SATA_ICID("fsl,ls1043a-ahci", FSL_SATA_STREAM_ID),
+	SET_QDMA_ICID("fsl,ls1043a-qdma", FSL_QDMA_STREAM_ID),
+	SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+	SET_ETR_ICID(FSL_ETR_STREAM_ID),
+	SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID),
+	SET_QE_ICID(FSL_QE_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+	SET_SEC_QI_ICID(FSL_DPAA1_STREAM_ID_END),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 3),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 4),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 5),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 6),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 7),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 8),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 9),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 10),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 11),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 12),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct fman_icid_id_table fman_icid_tbl[] = {
+	/* port id, icid */
+	SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x03, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x04, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x05, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x06, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x07, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x08, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x09, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0a, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0b, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0c, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0d, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x28, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x29, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2a, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2b, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2c, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2d, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x10, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x11, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x30, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x31, FSL_DPAA1_STREAM_ID_END),
+};
+
+int fman_icid_tbl_sz = ARRAY_SIZE(fman_icid_tbl);
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043a_psci.S b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043a_psci.S
new file mode 100644
index 000000000..b4c7d6f85
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043a_psci.S
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Author: Hongbo Zhang <hongbo.zhang@nxp.com>
+ * This file implements LS102X platform PSCI SYSTEM-SUSPEND function
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/psci.h>
+
+	.pushsection ._secure.text, "ax"
+
+.globl	psci_version
+psci_version:
+	ldr	w0, =0x00010000		/* PSCI v1.0 */
+	ret
+
+	.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043a_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043a_serdes.c
new file mode 100644
index 000000000..6c5e52eba
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1043a_serdes.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_lsch2.h>
+
+struct serdes_config {
+	u32 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x1555, {XFI_FM1_MAC9, PCIE1, PCIE2, PCIE3} },
+	{0x2555, {SGMII_2500_FM1_DTSEC9, PCIE1, PCIE2, PCIE3} },
+	{0x4555, {QSGMII_FM1_A, PCIE1, PCIE2, PCIE3} },
+	{0x4558, {QSGMII_FM1_A, PCIE1, PCIE2, SATA1} },
+	{0x1355, {XFI_FM1_MAC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3} },
+	{0x2355, {SGMII_2500_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3} },
+	{0x3335, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC5,
+		  PCIE3} },
+	{0x3355, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3} },
+	{0x3358, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, SATA1} },
+	{0x3555, {SGMII_FM1_DTSEC9, PCIE1, PCIE2, PCIE3} },
+	{0x3558, {SGMII_FM1_DTSEC9, PCIE1, PCIE2, SATA1} },
+	{0x7000, {PCIE1, PCIE1, PCIE1, PCIE1} },
+	{0x9998, {PCIE1, PCIE2, PCIE3, SATA1} },
+	{0x6058, {PCIE1, PCIE1, PCIE2, SATA1} },
+	{0x1455, {XFI_FM1_MAC9, QSGMII_FM1_A, PCIE2, PCIE3} },
+	{0x2455, {SGMII_2500_FM1_DTSEC9, QSGMII_FM1_A, PCIE2, PCIE3} },
+	{0x2255, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC2, PCIE2, PCIE3} },
+	{0x3333, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC5,
+		  SGMII_FM1_DTSEC6} },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
new file mode 100644
index 000000000..abd847b5b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch2.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+};
+#endif
+
+struct icid_id_table icid_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START),
+	SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1),
+#endif
+
+	SET_SDHC_ICID(FSL_SDHC_STREAM_ID),
+
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID),
+
+	SET_SATA_ICID("fsl,ls1046a-ahci", FSL_SATA_STREAM_ID),
+	SET_QDMA_ICID("fsl,ls1046a-qdma", FSL_QDMA_STREAM_ID),
+	SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+	SET_ETR_ICID(FSL_ETR_STREAM_ID),
+	SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+	SET_SEC_QI_ICID(FSL_DPAA1_STREAM_ID_END),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 3),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 4),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 5),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 6),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 7),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 8),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 9),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 10),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 11),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 12),
+	SET_SEC_DECO_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 13),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct fman_icid_id_table fman_icid_tbl[] = {
+	/* port id, icid */
+	SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x03, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x04, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x05, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x06, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x07, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x08, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x09, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0a, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0b, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0c, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0d, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x28, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x29, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2a, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2b, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2c, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2d, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x10, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x11, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x30, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x31, FSL_DPAA1_STREAM_ID_END),
+};
+
+int fman_icid_tbl_sz = ARRAY_SIZE(fman_icid_tbl);
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c
new file mode 100644
index 000000000..9347e516b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_lsch2.h>
+
+struct serdes_config {
+	u32 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x3333, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC5,
+		  SGMII_FM1_DTSEC6} },
+	{0x1133, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC5,
+		  SGMII_FM1_DTSEC6} },
+	{0x1333, {XFI_FM1_MAC9, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC5,
+		  SGMII_FM1_DTSEC6} },
+	{0x2333, {SGMII_2500_FM1_DTSEC9, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC5,
+		  SGMII_FM1_DTSEC6} },
+	{0x2233, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC10,
+		  SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x1040, {XFI_FM1_MAC9, NONE, QSGMII_FM1_A, NONE} },
+	{0x2040, {SGMII_2500_FM1_DTSEC9, NONE, QSGMII_FM1_A, NONE} },
+	{0x1163, {XFI_FM1_MAC9, XFI_FM1_MAC10, PCIE1, SGMII_FM1_DTSEC6} },
+	{0x2263, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC10, PCIE1,
+		  SGMII_FM1_DTSEC6} },
+	{0x3363, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, PCIE1,
+		  SGMII_FM1_DTSEC6} },
+	{0x2223, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC10,
+		  SGMII_2500_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x3040, {SGMII_FM1_DTSEC9, NONE, QSGMII_FM1_A, NONE} },
+	{}
+};
+
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x8888, {PCIE1, PCIE1, PCIE1, PCIE1} },
+	{0x5559, {PCIE1, PCIE2, PCIE3, SATA1} },
+	{0x5577, {PCIE1, PCIE2, PCIE3, PCIE3} },
+	{0x5506, {PCIE1, PCIE2, NONE, PCIE3} },
+	{0x0506, {NONE, PCIE2, NONE, PCIE3} },
+	{0x0559, {NONE, PCIE2, PCIE3, SATA1} },
+	{0x5A59, {PCIE1, SGMII_FM1_DTSEC2, PCIE3, SATA1} },
+	{0x5A06, {PCIE1, SGMII_FM1_DTSEC2, NONE, PCIE3} },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
new file mode 100644
index 000000000..23743ae10
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_SDHC_ICID(1, FSL_SDMMC_STREAM_ID),
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,ls1088a-ahci", FSL_SATA1_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
new file mode 100644
index 000000000..280afbbf9
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017-2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+#include <asm/io.h>
+
+struct serdes_config {
+	u8 ip_protocol;
+	u8 lanes[SRDS_MAX_LANES];
+	u8 rcw_lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x12, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 3 }  },
+	{0x15, {SGMII3, SGMII7, XFI1, XFI2 }, {3, 3, 1, 1 } },
+	{0x16, {SGMII3, SGMII7, SGMII1, XFI2 }, {3, 3, 3, 1 } },
+	{0x17, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 2 } },
+	{0x18, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 2, 2 } },
+	{0x19, {SGMII3, QSGMII_B, XFI1, XFI2}, {3, 4, 1, 1 } },
+	{0x1A, {SGMII3, QSGMII_B, SGMII1, XFI2 }, {3, 4, 3, 1 } },
+	{0x1B, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 2 } },
+	{0x1C, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 2, 2 } },
+	{0x1D, {QSGMII_A, QSGMII_B, XFI1, XFI2 }, {4, 4, 1, 1 } },
+	{0x1E, {QSGMII_A, QSGMII_B, SGMII1, XFI2  }, {4, 4, 3, 1 } },
+	{0x1F, {QSGMII_A, QSGMII_B, SGMII1, SGMII2  }, {4, 4, 3, 2 } },
+	{0x20, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 2, 2 } },
+	{0x35, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 3 } },
+	{0x36, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 3, 3 } },
+	{0x3A, {SGMII3, PCIE1, SGMII1, SGMII2 }, {3, 5, 3, 3 } },
+		{}
+};
+
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x0C, {PCIE1, PCIE1, PCIE1, PCIE1 }, {8, 8, 8, 8 } },
+	{0x0D, {PCIE1, PCIE2, PCIE3, SATA1 }, {5, 5, 5, 9 }  },
+	{0x0E, {PCIE1, PCIE1, PCIE2, SATA1 }, {7, 7, 6, 9 }  },
+	{0x13, {PCIE1, PCIE1, PCIE3, PCIE3 }, {7, 7, 7, 7 }  },
+	{0x14, {PCIE1, PCIE2, PCIE3, PCIE3 }, {5, 5, 7, 7 }  },
+	{0x3C, {NONE, PCIE2, NONE, PCIE3 }, {0, 5, 0, 6 }  },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+};
+
+bool soc_has_mac1(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int svr = gur_in32(&gur->svr);
+	unsigned int version = SVR_SOC_VER(svr);
+
+	return (version == SVR_LS1088A || version == SVR_LS1084A);
+}
+
+int serdes_get_number(int serdes, int cfg)
+{
+	struct serdes_config *ptr;
+	int i, j, index, lnk;
+	int is_found, max_lane = SRDS_MAX_LANES;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+
+	while (ptr->ip_protocol) {
+		is_found = 1;
+		for (i = 0, j = max_lane - 1; i < max_lane; i++, j--) {
+			lnk = cfg & (0xf << 4 * i);
+			lnk = lnk >> (4 * i);
+
+			index = (serdes == FSL_SRDS_1) ? j : i;
+
+			if (ptr->rcw_lanes[index] == lnk && is_found)
+				is_found = 1;
+			else
+				is_found = 0;
+		}
+
+		if (is_found)
+			return ptr->ip_protocol;
+		ptr++;
+	}
+
+	return 0;
+}
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+	/*
+	 * LS1044A/1048A  support only one XFI port
+	 * Disable MAC1 for LS1044A/1048A
+	 */
+	if (serdes == FSL_SRDS_1 && lane == 2) {
+		if (!soc_has_mac1())
+			return 0;
+	}
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->ip_protocol) {
+		if (ptr->ip_protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->ip_protocol) {
+		if (ptr->ip_protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->ip_protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
new file mode 100644
index 000000000..799742284
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+
+struct serdes_config {
+	u8 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x03, {PCIE2, PCIE2, PCIE2, PCIE2, PCIE1, PCIE1, PCIE1, PCIE1 } },
+	{0x05, {PCIE2, PCIE2, PCIE2, PCIE2, SGMII4, SGMII3, SGMII2, SGMII1 } },
+	{0x07, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x09, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x0A, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x0C, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x0E, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x26, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, XFI2, XFI1 } },
+	{0x28, {SGMII8, SGMII7, SGMII6, SGMII5, XFI4, XFI3, XFI2, XFI1 } },
+	{0x2A, {XFI8, XFI7, XFI6, XFI5, XFI4, XFI3, XFI2, XFI1 } },
+	{0x2B, {SGMII8, SGMII7, SGMII6, SGMII5, XAUI1, XAUI1, XAUI1, XAUI1  } },
+	{0x32, {XAUI2, XAUI2, XAUI2, XAUI2, XAUI1, XAUI1, XAUI1, XAUI1  } },
+	{0x33, {PCIE2, PCIE2, PCIE2, PCIE2, QSGMII_D, QSGMII_C, QSGMII_B,
+		QSGMII_A} },
+	{0x35, {QSGMII_D, QSGMII_C, QSGMII_B, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+	{0x39, {SGMII8, SGMII7, SGMII6, PCIE2, SGMII4, SGMII3, SGMII2,
+		PCIE1 } },
+	{0x3B, {XFI8, XFI7, XFI6, PCIE2, XFI4, XFI3, XFI2, PCIE1 } },
+	{0x4B, {PCIE2, PCIE2, PCIE2, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+	{0x4C, {XFI8, XFI7, XFI6, XFI5, PCIE1, PCIE1, PCIE1, PCIE1 } },
+	{0x4D, {SGMII8, SGMII7, PCIE2, PCIE2, SGMII4, SGMII3, PCIE1, PCIE1 } },
+		{}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x07, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x09, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x0A, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x0C, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x0E, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x3D, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3 } },
+	{0x3E, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3 } },
+	{0x3F, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x40, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x41, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2 } },
+	{0x42, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2 } },
+	{0x43, {PCIE3, PCIE3, PCIE3, PCIE3, NONE, NONE, SATA1, SATA2 } },
+	{0x44, {PCIE3, PCIE3, PCIE3, PCIE3, NONE, NONE, SATA1, SATA2 } },
+	{0x45, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, PCIE4,
+		PCIE4 } },
+	{0x47, {PCIE3, SGMII10, SGMII11, SGMII12, PCIE4, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x49, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
+		SATA2 } },
+	{0x4A, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
+		SATA2 } },
+	{0x51, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x57, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII15, SGMII16 } },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls2088_ids.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls2088_ids.c
new file mode 100644
index 000000000..e6403b795
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ls2088_ids.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_SDHC_ICID(1, FSL_SDMMC_STREAM_ID),
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,ls2080a-ahci", FSL_SATA1_STREAM_ID),
+	SET_SATA_ICID(2, "fsl,ls2080a-ahci", FSL_SATA2_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(4, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(5, FSL_SEC_STREAM_ID),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lx2160_ids.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lx2160_ids.c
new file mode 100644
index 000000000..3a0ed1fa5
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lx2160_ids.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_SDHC_ICID(1, FSL_SDMMC_STREAM_ID),
+	SET_SDHC_ICID(2, FSL_SDMMC2_STREAM_ID),
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,lx2160a-ahci", FSL_SATA1_STREAM_ID),
+	SET_SATA_ICID(2, "fsl,lx2160a-ahci", FSL_SATA2_STREAM_ID),
+	SET_SATA_ICID(3, "fsl,lx2160a-ahci", FSL_SATA3_STREAM_ID),
+	SET_SATA_ICID(4, "fsl,lx2160a-ahci", FSL_SATA4_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(4, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(5, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(6, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(7, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(8, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(9, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(10, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(11, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(12, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(13, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(14, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(15, FSL_SEC_STREAM_ID),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c
new file mode 100644
index 000000000..5941d90e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018, 2020 NXP
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+
+struct serdes_config {
+	u8 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+#if defined(CONFIG_ARCH_LX2162A)
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x01, {PCIE1, PCIE1, PCIE1, PCIE1 } },
+	{0x02, {SGMII6, SGMII5, SGMII4, SGMII3 } },
+	{0x03, {XFI6, XFI5, XFI4, XFI3 } },
+	{0x09, {SGMII6, SGMII5, SGMII4, PCIE1 } },
+	{0x0B, {SGMII6, SGMII5, PCIE1, PCIE1 } },
+	{0x0F, {_50GE2, _50GE2, _50GE1, _50GE1 } },
+	{0x10, {_25GE6, _25GE5, _50GE1, _50GE1 } },
+	{0x11, {_25GE6, _25GE5, _25GE4, _25GE3 } },
+	{0x12, {_25GE6, _25GE5, XFI4, XFI3 } },
+	{0x14, {_40GE1, _40GE1, _40GE1, _40GE1 } },
+	{}
+};
+#else
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x01, {PCIE2, PCIE2, PCIE2, PCIE2, PCIE1, PCIE1, PCIE1, PCIE1 } },
+	{0x02, {PCIE2, PCIE2, PCIE2, PCIE2, SGMII6, SGMII5, SGMII4, SGMII3 } },
+	{0x03, {PCIE2, PCIE2, PCIE2, PCIE2, XFI6, XFI5, XFI4,
+		XFI3 } },
+	{0x04, {SGMII10, SGMII9, SGMII8, SGMII7, SGMII6, SGMII5, SGMII4,
+		SGMII3 } },
+	{0x05, {XFI10, XFI9, XFI8, XFI7, PCIE1, PCIE1, PCIE1,
+		PCIE1 } },
+	{0x06, {SGMII10, SGMII9, SGMII8, SGMII7, SGMII6, SGMII5, XFI4,
+		XFI3 } },
+	{0x07, {SGMII10, SGMII9, SGMII8, SGMII7, XFI6, XFI5, XFI4,
+		XFI3 } },
+	{0x08, {XFI10, XFI9, XFI8, XFI7, XFI6, XFI5, XFI4, XFI3 } },
+	{0x09, {SGMII10, SGMII9, SGMII8, PCIE2, SGMII6, SGMII5, SGMII4,
+		PCIE1 } },
+	{0x0A, {XFI10, XFI9, XFI8, PCIE2, XFI6, XFI5, XFI4, PCIE1 } },
+	{0x0B, {SGMII10, SGMII9, PCIE2, PCIE2, SGMII6, SGMII5, PCIE1, PCIE1 } },
+	{0x0C, {SGMII10, SGMII9, PCIE2, PCIE2, PCIE1, PCIE1, PCIE1, PCIE1 } },
+	{0x0D, {_100GE2, _100GE2, _100GE2, _100GE2, _100GE1, _100GE1, _100GE1,
+		_100GE1 } },
+	{0x0E, {PCIE2, PCIE2, PCIE2, PCIE2, _100GE1, _100GE1, _100GE1,
+		_100GE1 } },
+	{0x0F, {PCIE2, PCIE2, PCIE2, PCIE2, _50GE2, _50GE2, _50GE1, _50GE1 } },
+	{0x10, {PCIE2, PCIE2, PCIE2, PCIE2, _25GE6, _25GE5, _50GE1, _50GE1 } },
+	{0x11, {PCIE2, PCIE2, PCIE2, PCIE2, _25GE6, _25GE5, _25GE4, _25GE3 } },
+	{0x12, {XFI10, XFI9, XFI8, XFI7, _25GE6, _25GE5, XFI4,
+		XFI3 } },
+	{0x13, {_40GE2, _40GE2, _40GE2, _40GE2, _25GE6, _25GE5, XFI4, XFI3 } },
+	{0x14, {_40GE2, _40GE2, _40GE2, _40GE2, _40GE1, _40GE1, _40GE1,
+		_40GE1 } },
+	{0x15, {_25GE10, _25GE9, PCIE2, PCIE2, _25GE6, _25GE5, _25GE4,
+		_25GE3 } },
+	{0x16, {XFI10, XFI9, PCIE2, PCIE2, XFI6, XFI5, XFI4, XFI3 } },
+	{}
+};
+#endif
+
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x01, {PCIE3, PCIE3, SATA1, SATA2, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x02, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3 } },
+	{0x03, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x04, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2 } },
+	{0x05, {PCIE3, PCIE3, PCIE3, PCIE3, SATA3, SATA4, SATA1, SATA2 } },
+	{0x06, {PCIE3, PCIE3, PCIE3, PCIE3, SGMII15, SGMII16, XFI13,
+		XFI14 } },
+	{0x07, {PCIE3, SGMII12, SGMII17, SGMII18, PCIE4, SGMII16, XFI13,
+		XFI14 } },
+	{0x08, {NONE, NONE, SATA1, SATA2, SATA3, SATA4, XFI13, XFI14 } },
+	{0x09, {SGMII11, SGMII12, SGMII17, SGMII18, SGMII15, SGMII16, SGMII13,
+		SGMII14} },
+	{0x0A, {SGMII11, SGMII12, SGMII17, SGMII18, PCIE4, PCIE4, PCIE4,
+		PCIE4 } },
+	{0x0B, {PCIE3, SGMII12, SGMII17, SGMII18, PCIE4, SGMII16, SGMII13,
+		SGMII14 } },
+	{0x0C, {SGMII11, SGMII12, SGMII17, SGMII18, PCIE4, PCIE4, SATA1,
+		SATA2 } },
+	{0x0D, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII13, SGMII14 } },
+	{0x0E, {PCIE3, PCIE3, SGMII17, SGMII18, PCIE4, PCIE4, SGMII13,
+		SGMII14 } },
+	{}
+};
+
+static struct serdes_config serdes3_cfg_tbl[] = {
+	/* SerDes 3 */
+	{0x02, {PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5 } },
+	{0x03, {PCIE5, PCIE5, PCIE5, PCIE5, PCIE6, PCIE6, PCIE6, PCIE6 } },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+	serdes3_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/mp.c
new file mode 100644
index 000000000..730d7663d
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/mp.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <image.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/arch/mp.h>
+#include <asm/arch/soc.h>
+#include <linux/delay.h>
+#include <linux/psci.h>
+#include "cpu.h"
+#include <asm/arch-fsl-layerscape/soc.h>
+#include <efi_loader.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void *get_spin_tbl_addr(void)
+{
+	/* the spin table is at the beginning */
+	return secondary_boot_code_start;
+}
+
+void update_os_arch_secondary_cores(uint8_t os_arch)
+{
+	u64 *table = get_spin_tbl_addr();
+	int i;
+
+	for (i = 1; i < CONFIG_MAX_CPUS; i++) {
+		if (os_arch == IH_ARCH_DEFAULT)
+			table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+				SPIN_TABLE_ELEM_ARCH_COMP_IDX] = OS_ARCH_SAME;
+		else
+			table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+				SPIN_TABLE_ELEM_ARCH_COMP_IDX] = OS_ARCH_DIFF;
+	}
+}
+
+#ifdef CONFIG_FSL_LSCH3
+static void wake_secondary_core_n(int cluster, int core, int cluster_cores)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR);
+	u32 mpidr = 0;
+
+	mpidr = ((cluster << 8) | core);
+	/*
+	 * mpidr_el1 register value of core which needs to be released
+	 * is written to scratchrw[6] register
+	 */
+	gur_out32(&gur->scratchrw[6], mpidr);
+	asm volatile("dsb st" : : : "memory");
+	rst->brrl |= 1 << ((cluster * cluster_cores) + core);
+	asm volatile("dsb st" : : : "memory");
+	/*
+	 * scratchrw[6] register value is polled
+	 * when the value becomes zero, this means that this core is up
+	 * and running, next core can be released now
+	 */
+	while (gur_in32(&gur->scratchrw[6]) != 0)
+		;
+}
+#endif
+
+int fsl_layerscape_wake_seconday_cores(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#ifdef CONFIG_FSL_LSCH3
+	struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR);
+	u32 svr, ver, cluster, type;
+	int j = 0, cluster_cores = 0;
+#elif defined(CONFIG_FSL_LSCH2)
+	struct ccsr_scfg __iomem *scfg = (void *)(CONFIG_SYS_FSL_SCFG_ADDR);
+#endif
+	u32 cores, cpu_up_mask = 1;
+	int i, timeout = 10;
+	u64 *table;
+#ifdef CONFIG_EFI_LOADER
+	u64 reloc_addr = U32_MAX;
+	efi_status_t ret;
+#endif
+
+#ifdef COUNTER_FREQUENCY_REAL
+	/* update for secondary cores */
+	__real_cntfrq = COUNTER_FREQUENCY_REAL;
+	flush_dcache_range((unsigned long)&__real_cntfrq,
+			   (unsigned long)&__real_cntfrq + 8);
+#endif
+
+#ifdef CONFIG_EFI_LOADER
+	/*
+	 * EFI will reserve 64kb for its runtime services. This will probably
+	 * overlap with our spin table code, which is why we have to relocate
+	 * it.
+	 * Keep this after the __real_cntfrq update, so we have it when we
+	 * copy the complete section here.
+	 */
+	ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS,
+				 EFI_RESERVED_MEMORY_TYPE,
+				 efi_size_in_pages(secondary_boot_code_size),
+				 &reloc_addr);
+	if (ret == EFI_SUCCESS) {
+		debug("Relocating spin table from %llx to %llx (size %lx)\n",
+		      (u64)secondary_boot_code_start, reloc_addr,
+		      secondary_boot_code_size);
+		memcpy((void *)reloc_addr, secondary_boot_code_start,
+		       secondary_boot_code_size);
+		flush_dcache_range(reloc_addr,
+				   reloc_addr + secondary_boot_code_size);
+
+		/* set new entry point for secondary cores */
+		secondary_boot_addr += (void *)reloc_addr -
+				       secondary_boot_code_start;
+		flush_dcache_range((unsigned long)&secondary_boot_addr,
+				   (unsigned long)&secondary_boot_addr + 8);
+
+		/* this will be used to reserve the memory */
+		secondary_boot_code_start = (void *)reloc_addr;
+	}
+#endif
+
+	cores = cpu_mask();
+	/* Clear spin table so that secondary processors
+	 * observe the correct value after waking up from wfe.
+	 */
+	table = get_spin_tbl_addr();
+	memset(table, 0, CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE);
+	flush_dcache_range((unsigned long)table,
+			   (unsigned long)table +
+			   (CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE));
+
+	debug("Waking secondary cores to start from %lx\n", gd->relocaddr);
+
+#ifdef CONFIG_FSL_LSCH3
+	gur_out32(&gur->bootlocptrh, (u32)(gd->relocaddr >> 32));
+	gur_out32(&gur->bootlocptrl, (u32)gd->relocaddr);
+
+	svr = gur_in32(&gur->svr);
+	ver = SVR_SOC_VER(svr);
+	if (ver == SVR_LS2080A || ver == SVR_LS2085A) {
+		gur_out32(&gur->scratchrw[6], 1);
+		asm volatile("dsb st" : : : "memory");
+		rst->brrl = cores;
+		asm volatile("dsb st" : : : "memory");
+	} else {
+		/*
+		 * Release the cores out of reset one-at-a-time to avoid
+		 * power spikes
+		 */
+		i = 0;
+		cluster = in_le32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = initiator_type(cluster, j);
+			if (type &&
+			    TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+				cluster_cores++;
+		}
+
+		do {
+			cluster = in_le32(&gur->tp_cluster[i].lower);
+			for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+				type = initiator_type(cluster, j);
+				if (type &&
+				    TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+					wake_secondary_core_n(i, j,
+							      cluster_cores);
+			}
+		i++;
+		} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+	}
+#elif defined(CONFIG_FSL_LSCH2)
+	scfg_out32(&scfg->scratchrw[0], (u32)(gd->relocaddr >> 32));
+	scfg_out32(&scfg->scratchrw[1], (u32)gd->relocaddr);
+	asm volatile("dsb st" : : : "memory");
+	gur_out32(&gur->brrl, cores);
+	asm volatile("dsb st" : : : "memory");
+
+	/* Bootup online cores */
+	scfg_out32(&scfg->corebcr, cores);
+#endif
+	/* This is needed as a precautionary measure.
+	 * If some code before this has accidentally  released the secondary
+	 * cores then the pre-bootloader code will trap them in a "wfe" unless
+	 * the scratchrw[6] is set. In this case we need a sev here to get these
+	 * cores moving again.
+	 */
+	asm volatile("sev");
+
+	while (timeout--) {
+		flush_dcache_range((unsigned long)table, (unsigned long)table +
+				   CONFIG_MAX_CPUS * 64);
+		for (i = 1; i < CONFIG_MAX_CPUS; i++) {
+			if (table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+					SPIN_TABLE_ELEM_STATUS_IDX])
+				cpu_up_mask |= 1 << i;
+		}
+		if (hweight32(cpu_up_mask) == hweight32(cores))
+			break;
+		udelay(10);
+	}
+	if (timeout <= 0) {
+		printf("CPU:   Failed to bring up some cores (mask 0x%x)\n",
+		       cores ^ cpu_up_mask);
+		return 1;
+	}
+	printf("CPU:   %d cores online\n", hweight32(cores));
+
+	return 0;
+}
+
+int is_core_valid(unsigned int core)
+{
+	return !!((1 << core) & cpu_mask());
+}
+
+static int is_pos_valid(unsigned int pos)
+{
+	return !!((1 << pos) & cpu_pos_mask());
+}
+
+int is_core_online(u64 cpu_id)
+{
+	u64 *table = get_spin_tbl_addr();
+	int pos = id_to_core(cpu_id);
+	table += pos * WORDS_PER_SPIN_TABLE_ENTRY;
+	return table[SPIN_TABLE_ELEM_STATUS_IDX] == 1;
+}
+
+int cpu_reset(u32 nr)
+{
+	puts("Feature is not implemented.\n");
+
+	return 0;
+}
+
+int cpu_disable(u32 nr)
+{
+	puts("Feature is not implemented.\n");
+
+	return 0;
+}
+
+static int core_to_pos(int nr)
+{
+	u32 cores = cpu_pos_mask();
+	int i, count = 0;
+
+	if (nr == 0) {
+		return 0;
+	} else if (nr >= hweight32(cores)) {
+		puts("Not a valid core number.\n");
+		return -1;
+	}
+
+	for (i = 1; i < 32; i++) {
+		if (is_pos_valid(i)) {
+			count++;
+			if (count == nr)
+				break;
+		}
+	}
+
+	if (count != nr)
+		return -1;
+
+	return i;
+}
+
+int cpu_status(u32 nr)
+{
+	u64 *table = get_spin_tbl_addr();
+	int pos;
+
+	if (nr == 0) {
+		printf("table base @ 0x%p\n", table);
+	} else {
+		pos = core_to_pos(nr);
+		if (pos < 0)
+			return -1;
+		table += pos * WORDS_PER_SPIN_TABLE_ENTRY;
+		printf("table @ 0x%p\n", table);
+		printf("   addr - 0x%016llx\n",
+		       table[SPIN_TABLE_ELEM_ENTRY_ADDR_IDX]);
+		printf("   status   - 0x%016llx\n",
+		       table[SPIN_TABLE_ELEM_STATUS_IDX]);
+		printf("   lpid  - 0x%016llx\n",
+		       table[SPIN_TABLE_ELEM_LPID_IDX]);
+	}
+
+	return 0;
+}
+
+int cpu_release(u32 nr, int argc, char *const argv[])
+{
+	u64 boot_addr;
+	u64 *table = get_spin_tbl_addr();
+	int pos;
+
+	boot_addr = simple_strtoull(argv[0], NULL, 16);
+
+	if (check_psci()) {
+		/* SPIN Table is used */
+		pos = core_to_pos(nr);
+		if (pos <= 0)
+			return -1;
+
+		table += pos * WORDS_PER_SPIN_TABLE_ENTRY;
+		table[SPIN_TABLE_ELEM_ENTRY_ADDR_IDX] = boot_addr;
+		flush_dcache_range((unsigned long)table,
+			   (unsigned long)table + SPIN_TABLE_ELEM_SIZE);
+		asm volatile("dsb st");
+
+		/*
+		 * The secondary CPUs polling the spin-table above for a non-zero
+		 * value. To save power "wfe" is called. Thus call "sev" here to
+		 * wake the CPUs and let them check the spin-table again (see
+		 * slave_cpu loop in lowlevel.S)
+		 */
+		asm volatile("sev");
+	} else {
+		/* Use PSCI to kick the core */
+		struct pt_regs regs;
+
+		printf("begin to kick cpu core #%d to address %llx\n",
+		       nr, boot_addr);
+		regs.regs[0] = PSCI_0_2_FN64_CPU_ON;
+		regs.regs[1] = nr;
+		regs.regs[2] = boot_addr;
+		regs.regs[3] = 0;
+		smc_call(&regs);
+		if (regs.regs[0])
+			return -1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
new file mode 100644
index 000000000..b9894d41b
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 NXP Semiconductor, Inc.
+ */
+#include <common.h>
+#include <log.h>
+#include <malloc.h>
+#include <config.h>
+#include <errno.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/system.h>
+#include <asm/types.h>
+#include <asm/arch/soc.h>
+#ifdef CONFIG_FSL_LSCH3
+#include <asm/arch/immap_lsch3.h>
+#elif defined(CONFIG_FSL_LSCH2)
+#include <asm/arch/immap_lsch2.h>
+#endif
+#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT)
+#include <asm/armv8/sec_firmware.h>
+#endif
+#ifdef CONFIG_CHAIN_OF_TRUST
+#include <fsl_validate.h>
+#endif
+
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_NAND
+#include <nand.h>
+#elif defined(CONFIG_SYS_LS_PPA_FW_IN_MMC)
+#include <mmc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int ppa_init(void)
+{
+	unsigned int el = current_el();
+	void *ppa_fit_addr;
+	u32 *boot_loc_ptr_l, *boot_loc_ptr_h;
+	u32 *loadable_l, *loadable_h;
+	int ret;
+
+#ifdef CONFIG_CHAIN_OF_TRUST
+	uintptr_t ppa_esbc_hdr = 0;
+	uintptr_t ppa_img_addr = 0;
+#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \
+	defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
+	void *ppa_hdr_ddr;
+#endif
+#endif
+
+	/* Skip if running at lower exception level */
+	if (el < 3) {
+		debug("Skipping PPA init, running at EL%d\n", el);
+		return 0;
+	}
+
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
+	ppa_fit_addr = (void *)CONFIG_SYS_LS_PPA_FW_ADDR;
+	debug("%s: PPA image load from XIP\n", __func__);
+#ifdef CONFIG_CHAIN_OF_TRUST
+	ppa_esbc_hdr = CONFIG_SYS_LS_PPA_ESBC_ADDR;
+#endif
+#else /* !CONFIG_SYS_LS_PPA_FW_IN_XIP */
+	size_t fw_length, fdt_header_len = sizeof(struct fdt_header);
+
+	/* Copy PPA image from MMC/SD/NAND to allocated memory */
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_MMC
+	struct mmc *mmc;
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
+	struct fdt_header *fitp;
+	u32 cnt;
+	u32 blk;
+
+	debug("%s: PPA image load from eMMC/SD\n", __func__);
+
+	ret = mmc_initialize(gd->bd);
+	if (ret) {
+		printf("%s: mmc_initialize() failed\n", __func__);
+		return ret;
+	}
+	mmc = find_mmc_device(dev);
+	if (!mmc) {
+		printf("PPA: MMC cannot find device for PPA firmware\n");
+		return -ENODEV;
+	}
+
+	ret = mmc_init(mmc);
+	if (ret) {
+		printf("%s: mmc_init() failed\n", __func__);
+		return ret;
+	}
+
+	fitp = malloc(roundup(fdt_header_len, 512));
+	if (!fitp) {
+		printf("PPA: malloc failed for FIT header(size 0x%zx)\n",
+		       roundup(fdt_header_len, 512));
+		return -ENOMEM;
+	}
+
+	blk = CONFIG_SYS_LS_PPA_FW_ADDR / 512;
+	cnt = DIV_ROUND_UP(fdt_header_len, 512);
+	debug("%s: MMC read PPA FIT header: dev # %u, block # %u, count %u\n",
+	      __func__, dev, blk, cnt);
+	ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, fitp);
+	if (ret != cnt) {
+		free(fitp);
+		printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+
+	ret = fdt_check_header(fitp);
+	if (ret) {
+		free(fitp);
+		printf("%s: fdt_check_header() failed\n", __func__);
+		return ret;
+	}
+
+#ifdef CONFIG_CHAIN_OF_TRUST
+	ppa_hdr_ddr = malloc(CONFIG_LS_PPA_ESBC_HDR_SIZE);
+	if (!ppa_hdr_ddr) {
+		printf("PPA: malloc failed for PPA header\n");
+		return -ENOMEM;
+	}
+
+	blk = CONFIG_SYS_LS_PPA_ESBC_ADDR >> 9;
+	cnt = DIV_ROUND_UP(CONFIG_LS_PPA_ESBC_HDR_SIZE, 512);
+	ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_hdr_ddr);
+	if (ret != cnt) {
+		free(ppa_hdr_ddr);
+		printf("MMC/SD read of PPA header failed\n");
+		return -EIO;
+	}
+	debug("Read PPA header to 0x%p\n", ppa_hdr_ddr);
+
+	ppa_esbc_hdr = (uintptr_t)ppa_hdr_ddr;
+#endif
+
+	fw_length = fdt_totalsize(fitp);
+	free(fitp);
+
+	fw_length = roundup(fw_length, 512);
+	ppa_fit_addr = malloc(fw_length);
+	if (!ppa_fit_addr) {
+		printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
+		       fw_length);
+		return -ENOMEM;
+	}
+
+	blk = CONFIG_SYS_LS_PPA_FW_ADDR / 512;
+	cnt = DIV_ROUND_UP(fw_length, 512);
+	debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n",
+	      __func__, dev, blk, cnt);
+	ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_fit_addr);
+	if (ret != cnt) {
+		free(ppa_fit_addr);
+		printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+
+#elif defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
+	struct fdt_header fit;
+
+	debug("%s: PPA image load from NAND\n", __func__);
+
+	nand_init();
+	ret = nand_read(get_nand_dev_by_index(0),
+			(loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
+			&fdt_header_len, (u_char *)&fit);
+	if (ret == -EUCLEAN) {
+		printf("NAND read of PPA FIT header at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+
+	ret = fdt_check_header(&fit);
+	if (ret) {
+		printf("%s: fdt_check_header() failed\n", __func__);
+		return ret;
+	}
+
+#ifdef CONFIG_CHAIN_OF_TRUST
+	ppa_hdr_ddr = malloc(CONFIG_LS_PPA_ESBC_HDR_SIZE);
+	if (!ppa_hdr_ddr) {
+		printf("PPA: malloc failed for PPA header\n");
+		return -ENOMEM;
+	}
+
+	fw_length = CONFIG_LS_PPA_ESBC_HDR_SIZE;
+
+	ret = nand_read(get_nand_dev_by_index(0),
+			(loff_t)CONFIG_SYS_LS_PPA_ESBC_ADDR,
+			&fw_length, (u_char *)ppa_hdr_ddr);
+	if (ret == -EUCLEAN) {
+		free(ppa_hdr_ddr);
+		printf("NAND read of PPA firmware at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+	debug("Read PPA header to 0x%p\n", ppa_hdr_ddr);
+
+	ppa_esbc_hdr = (uintptr_t)ppa_hdr_ddr;
+#endif
+
+	fw_length = fdt_totalsize(&fit);
+
+	ppa_fit_addr = malloc(fw_length);
+	if (!ppa_fit_addr) {
+		printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
+		       fw_length);
+		return -ENOMEM;
+	}
+
+	ret = nand_read(get_nand_dev_by_index(0),
+			(loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
+			&fw_length, (u_char *)ppa_fit_addr);
+	if (ret == -EUCLEAN) {
+		free(ppa_fit_addr);
+		printf("NAND read of PPA firmware at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+#else
+#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"
+#endif
+
+#endif
+
+#ifdef CONFIG_CHAIN_OF_TRUST
+	ppa_img_addr = (uintptr_t)ppa_fit_addr;
+	if (fsl_check_boot_mode_secure() != 0) {
+		/*
+		 * In case of failure in validation, fsl_secboot_validate
+		 * would not return back in case of Production environment
+		 * with ITS=1. In Development environment (ITS=0 and
+		 * SB_EN=1), the function may return back in case of
+		 * non-fatal failures.
+		 */
+		ret = fsl_secboot_validate(ppa_esbc_hdr,
+					   PPA_KEY_HASH,
+					   &ppa_img_addr);
+		if (ret != 0)
+			printf("SEC firmware(s) validation failed\n");
+		else
+			printf("SEC firmware(s) validation Successful\n");
+	}
+#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \
+	defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
+	free(ppa_hdr_ddr);
+#endif
+#endif
+
+#ifdef CONFIG_FSL_LSCH3
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	boot_loc_ptr_l = &gur->bootlocptrl;
+	boot_loc_ptr_h = &gur->bootlocptrh;
+
+	/* Assign addresses to loadable ptrs */
+	loadable_l = &gur->scratchrw[4];
+	loadable_h = &gur->scratchrw[5];
+#elif defined(CONFIG_FSL_LSCH2)
+	struct ccsr_scfg __iomem *scfg = (void *)(CONFIG_SYS_FSL_SCFG_ADDR);
+	boot_loc_ptr_l = &scfg->scratchrw[1];
+	boot_loc_ptr_h = &scfg->scratchrw[0];
+
+	/* Assign addresses to loadable ptrs */
+	loadable_l = &scfg->scratchrw[2];
+	loadable_h = &scfg->scratchrw[3];
+#endif
+
+	debug("fsl-ppa: boot_loc_ptr_l = 0x%p, boot_loc_ptr_h =0x%p\n",
+	      boot_loc_ptr_l, boot_loc_ptr_h);
+	ret = sec_firmware_init(ppa_fit_addr, boot_loc_ptr_l, boot_loc_ptr_h,
+				loadable_l, loadable_h);
+
+#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \
+	defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
+	free(ppa_fit_addr);
+#endif
+
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/soc.c
new file mode 100644
index 000000000..c3cd6c7ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -0,0 +1,975 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014-2015 Freescale Semiconductor
+ * Copyright 2019-2021 NXP
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <cpu_func.h>
+#include <env.h>
+#include <fsl_immap.h>
+#include <fsl_ifc.h>
+#include <init.h>
+#include <linux/sizes.h>
+#include <log.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/global_data.h>
+#include <asm/arch-fsl-layerscape/config.h>
+#include <asm/arch-fsl-layerscape/ns_access.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/gic-v3.h>
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+#include <fsl_csu.h>
+#endif
+#ifdef CONFIG_SYS_FSL_DDR
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr.h>
+#endif
+#ifdef CONFIG_CHAIN_OF_TRUST
+#include <fsl_validate.h>
+#endif
+#include <fsl_immap.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <linux/err.h>
+#ifdef CONFIG_GIC_V3_ITS
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#ifdef CONFIG_GIC_V3_ITS
+int ls_gic_rd_tables_init(void *blob)
+{
+	struct fdt_memory lpi_base;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int offset, ret;
+
+	offset = fdt_path_offset(gd->fdt_blob, "/syscon@0x80000000");
+	addr = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, offset, "reg",
+						  0, &size, false);
+
+	lpi_base.start = addr;
+	lpi_base.end = addr + size - 1;
+	ret = fdtdec_add_reserved_memory(blob, "lpi_rd_table", &lpi_base, NULL, false);
+	if (ret) {
+		debug("%s: failed to add reserved memory\n", __func__);
+		return ret;
+	}
+
+	ret = gic_lpi_tables_init();
+	if (ret)
+		debug("%s: failed to init gic-lpi-tables\n", __func__);
+
+	return ret;
+}
+#endif
+
+bool soc_has_dp_ddr(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 svr = gur_in32(&gur->svr);
+
+	/* LS2085A, LS2088A, LS2048A has DP_DDR */
+	if ((SVR_SOC_VER(svr) == SVR_LS2085A) ||
+	    (SVR_SOC_VER(svr) == SVR_LS2088A) ||
+	    (SVR_SOC_VER(svr) == SVR_LS2048A))
+		return true;
+
+	return false;
+}
+
+bool soc_has_aiop(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 svr = gur_in32(&gur->svr);
+
+	/* LS2085A has AIOP */
+	if (SVR_SOC_VER(svr) == SVR_LS2085A)
+		return true;
+
+	return false;
+}
+
+static inline void set_usb_txvreftune(u32 __iomem *scfg, u32 offset)
+{
+	scfg_clrsetbits32(scfg + offset / 4,
+			0xF << 6,
+			SCFG_USB_TXVREFTUNE << 6);
+}
+
+static void erratum_a009008(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009008
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \
+	defined(CONFIG_ARCH_LS1012A)
+	set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB1);
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB2);
+	set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB3);
+#endif
+#elif defined(CONFIG_ARCH_LS2080A)
+	set_usb_txvreftune(scfg, SCFG_USB3PRM1CR);
+#endif
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
+}
+
+static inline void set_usb_sqrxtune(u32 __iomem *scfg, u32 offset)
+{
+	scfg_clrbits32(scfg + offset / 4,
+			SCFG_USB_SQRXTUNE_MASK << 23);
+}
+
+static void erratum_a009798(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009798
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \
+	defined(CONFIG_ARCH_LS1012A)
+	set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB1);
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB2);
+	set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB3);
+#endif
+#elif defined(CONFIG_ARCH_LS2080A)
+	set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR);
+#endif
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
+}
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \
+	defined(CONFIG_ARCH_LS1012A)
+static inline void set_usb_pcstxswingfull(u32 __iomem *scfg, u32 offset)
+{
+	scfg_clrsetbits32(scfg + offset / 4,
+			0x7F << 9,
+			SCFG_USB_PCSTXSWINGFULL << 9);
+}
+#endif
+
+static void erratum_a008997(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008997
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \
+	defined(CONFIG_ARCH_LS1012A)
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB1);
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB2);
+	set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB3);
+#endif
+#elif defined(CONFIG_ARCH_LS1028A)
+	clrsetbits_le32(DCSR_BASE +  DCSR_USB_IOCR1,
+			0x7F << 11,
+			DCSR_USB_PCSTXSWINGFULL << 11);
+#endif
+#endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */
+}
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \
+	defined(CONFIG_ARCH_LS1012A)
+
+#define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy)	\
+	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1);	\
+	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2);	\
+	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3);	\
+	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4)
+
+#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+	defined(CONFIG_ARCH_LS1028A) || defined(CONFIG_ARCH_LX2160A) || \
+	defined(CONFIG_ARCH_LX2162A)
+
+#define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy)	\
+	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \
+	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); \
+	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \
+	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4)
+
+#endif
+
+static void erratum_a009007(void)
+{
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \
+	defined(CONFIG_ARCH_LS1012A)
+	void __iomem *usb_phy = (void __iomem *)SCFG_USB_PHY1;
+
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	usb_phy = (void __iomem *)SCFG_USB_PHY2;
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
+
+	usb_phy = (void __iomem *)SCFG_USB_PHY3;
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
+#endif
+#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+	defined(CONFIG_ARCH_LS1028A)
+	void __iomem *dcsr = (void __iomem *)DCSR_BASE;
+
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY1);
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY2);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */
+}
+
+#if defined(CONFIG_FSL_LSCH3)
+static void erratum_a050204(void)
+{
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+	void __iomem *dcsr = (void __iomem *)DCSR_BASE;
+
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY1);
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY2);
+#endif
+}
+/*
+ * This erratum requires setting a value to eddrtqcr1 to
+ * optimal the DDR performance.
+ */
+static void erratum_a008336(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
+	u32 *eddrtqcr1;
+
+#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
+	if (fsl_ddr_get_version(0) == 0x50200)
+		out_le32(eddrtqcr1, 0x63b30002);
+#endif
+#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
+	if (fsl_ddr_get_version(0) == 0x50200)
+		out_le32(eddrtqcr1, 0x63b30002);
+#endif
+#endif
+}
+
+/*
+ * This erratum requires a register write before being Memory
+ * controller 3 being enabled.
+ */
+static void erratum_a008514(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
+	u32 *eddrtqcr1;
+
+#ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
+	out_le32(eddrtqcr1, 0x63b20002);
+#endif
+#endif
+}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+#define PLATFORM_CYCLE_ENV_VAR	"a009635_interval_val"
+
+static unsigned long get_internval_val_mhz(void)
+{
+	char *interval = env_get(PLATFORM_CYCLE_ENV_VAR);
+	/*
+	 *  interval is the number of platform cycles(MHz) between
+	 *  wake up events generated by EPU.
+	 */
+	ulong interval_mhz = get_bus_freq(0) / (1000 * 1000);
+
+	if (interval)
+		interval_mhz = simple_strtoul(interval, NULL, 10);
+
+	return interval_mhz;
+}
+
+void erratum_a009635(void)
+{
+	u32 val;
+	unsigned long interval_mhz = get_internval_val_mhz();
+
+	if (!interval_mhz)
+		return;
+
+	val = in_le32(DCSR_CGACRE5);
+	writel(val | 0x00000200, DCSR_CGACRE5);
+
+	val = in_le32(EPU_EPCMPR5);
+	writel(interval_mhz, EPU_EPCMPR5);
+	val = in_le32(EPU_EPCCR5);
+	writel(val | 0x82820000, EPU_EPCCR5);
+	val = in_le32(EPU_EPSMCR5);
+	writel(val | 0x002f0000, EPU_EPSMCR5);
+	val = in_le32(EPU_EPECR5);
+	writel(val | 0x20000000, EPU_EPECR5);
+	val = in_le32(EPU_EPGCR);
+	writel(val | 0x80000000, EPU_EPGCR);
+}
+#endif	/* CONFIG_SYS_FSL_ERRATUM_A009635 */
+
+static void erratum_rcw_src(void)
+{
+#if defined(CONFIG_SPL) && defined(CONFIG_NAND_BOOT)
+	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+	u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE;
+	u32 val;
+
+	val = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
+	val &= ~DCFG_PORSR1_RCW_SRC;
+	val |= DCFG_PORSR1_RCW_SRC_NOR;
+	out_le32(dcfg_dcsr + DCFG_DCSR_PORCR1 / 4, val);
+#endif
+}
+
+#define I2C_DEBUG_REG 0x6
+#define I2C_GLITCH_EN 0x8
+/*
+ * This erratum requires setting glitch_en bit to enable
+ * digital glitch filter to improve clock stability.
+ */
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009203
+static void erratum_a009203(void)
+{
+#ifdef CONFIG_SYS_I2C
+	u8 __iomem *ptr;
+#ifdef I2C1_BASE_ADDR
+	ptr = (u8 __iomem *)(I2C1_BASE_ADDR + I2C_DEBUG_REG);
+
+	writeb(I2C_GLITCH_EN, ptr);
+#endif
+#ifdef I2C2_BASE_ADDR
+	ptr = (u8 __iomem *)(I2C2_BASE_ADDR + I2C_DEBUG_REG);
+
+	writeb(I2C_GLITCH_EN, ptr);
+#endif
+#ifdef I2C3_BASE_ADDR
+	ptr = (u8 __iomem *)(I2C3_BASE_ADDR + I2C_DEBUG_REG);
+
+	writeb(I2C_GLITCH_EN, ptr);
+#endif
+#ifdef I2C4_BASE_ADDR
+	ptr = (u8 __iomem *)(I2C4_BASE_ADDR + I2C_DEBUG_REG);
+
+	writeb(I2C_GLITCH_EN, ptr);
+#endif
+#endif
+}
+#endif
+
+void bypass_smmu(void)
+{
+	u32 val;
+	val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+	out_le32(SMMU_SCR0, val);
+	val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+	out_le32(SMMU_NSCR0, val);
+}
+void fsl_lsch3_early_init_f(void)
+{
+	erratum_rcw_src();
+#ifdef CONFIG_FSL_IFC
+	init_early_memctl_regs();	/* tighten IFC timing */
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009203
+	erratum_a009203();
+#endif
+	erratum_a008514();
+	erratum_a008336();
+	erratum_a009008();
+	erratum_a009798();
+	erratum_a008997();
+	erratum_a009007();
+	erratum_a050204();
+#ifdef CONFIG_CHAIN_OF_TRUST
+	/* In case of Secure Boot, the IBR configures the SMMU
+	* to allow only Secure transactions.
+	* SMMU must be reset in bypass mode.
+	* Set the ClientPD bit and Clear the USFCFG Bit
+	*/
+	if (fsl_check_boot_mode_secure() == 1)
+		bypass_smmu();
+#endif
+
+#if defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A) || \
+	defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) || \
+	defined(CONFIG_ARCH_LX2162A)
+	set_icids();
+#endif
+}
+
+/* Get VDD in the unit mV from voltage ID */
+int get_core_volt_from_fuse(void)
+{
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int vdd;
+	u32 fusesr;
+	u8 vid;
+
+	/* get the voltage ID from fuse status register */
+	fusesr = in_le32(&gur->dcfg_fusesr);
+	debug("%s: fusesr = 0x%x\n", __func__, fusesr);
+	vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) &
+		FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK;
+	if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) {
+		vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) &
+			FSL_CHASSIS3_DCFG_FUSESR_VID_MASK;
+	}
+	debug("%s: VID = 0x%x\n", __func__, vid);
+	switch (vid) {
+	case 0x00: /* VID isn't supported */
+		vdd = -EINVAL;
+		debug("%s: The VID feature is not supported\n", __func__);
+		break;
+	case 0x08: /* 0.9V silicon */
+		vdd = 900;
+		break;
+	case 0x10: /* 1.0V silicon */
+		vdd = 1000;
+		break;
+	default:  /* Other core voltage */
+		vdd = -EINVAL;
+		debug("%s: The VID(%x) isn't supported\n", __func__, vid);
+		break;
+	}
+	debug("%s: The required minimum volt of CORE is %dmV\n", __func__, vdd);
+
+	return vdd;
+}
+
+#elif defined(CONFIG_FSL_LSCH2)
+/*
+ * This erratum requires setting a value to eddrtqcr1 to optimal
+ * the DDR performance. The eddrtqcr1 register is in SCFG space
+ * of LS1043A and the offset is 0x157_020c.
+ */
+#if defined(CONFIG_SYS_FSL_ERRATUM_A009660) \
+	&& defined(CONFIG_SYS_FSL_ERRATUM_A008514)
+#error A009660 and A008514 can not be both enabled.
+#endif
+
+static void erratum_a009660(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009660
+	u32 *eddrtqcr1 = (void *)CONFIG_SYS_FSL_SCFG_ADDR + 0x20c;
+	out_be32(eddrtqcr1, 0x63b20042);
+#endif
+}
+
+static void erratum_a008850_early(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
+	/* part 1 of 2 */
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	/* Skip if running at lower exception level */
+	if (current_el() < 3)
+		return;
+
+	/* disables propagation of barrier transactions to DDRC from CCI400 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
+
+	/* disable the re-ordering in DDRC */
+	ddr_out32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
+#endif
+}
+
+void erratum_a008850_post(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
+	/* part 2 of 2 */
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	u32 tmp;
+
+	/* Skip if running at lower exception level */
+	if (current_el() < 3)
+		return;
+
+	/* enable propagation of barrier transactions to DDRC from CCI400 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+	/* enable the re-ordering in DDRC */
+	tmp = ddr_in32(&ddr->eor);
+	tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
+	ddr_out32(&ddr->eor, tmp);
+#endif
+}
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+void erratum_a010315(void)
+{
+	int i;
+
+	for (i = PCIE1; i <= PCIE4; i++)
+		if (!is_serdes_configured(i)) {
+			debug("PCIe%d: disabled all R/W permission!\n", i);
+			set_pcie_ns_access(i, 0);
+		}
+}
+#endif
+
+static void erratum_a010539(void)
+{
+#if defined(CONFIG_SYS_FSL_ERRATUM_A010539) && defined(CONFIG_QSPI_BOOT)
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 porsr1;
+
+	porsr1 = in_be32(&gur->porsr1);
+	porsr1 &= ~FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK;
+	out_be32((void *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
+		 porsr1);
+	out_be32((void *)(CONFIG_SYS_FSL_SCFG_ADDR + 0x1a8), 0xffffffff);
+#endif
+}
+
+/* Get VDD in the unit mV from voltage ID */
+int get_core_volt_from_fuse(void)
+{
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int vdd;
+	u32 fusesr;
+	u8 vid;
+
+	fusesr = in_be32(&gur->dcfg_fusesr);
+	debug("%s: fusesr = 0x%x\n", __func__, fusesr);
+	vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT) &
+		FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK;
+	if ((vid == 0) || (vid == FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK)) {
+		vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) &
+			FSL_CHASSIS2_DCFG_FUSESR_VID_MASK;
+	}
+	debug("%s: VID = 0x%x\n", __func__, vid);
+	switch (vid) {
+	case 0x00: /* VID isn't supported */
+		vdd = -EINVAL;
+		debug("%s: The VID feature is not supported\n", __func__);
+		break;
+	case 0x08: /* 0.9V silicon */
+		vdd = 900;
+		break;
+	case 0x10: /* 1.0V silicon */
+		vdd = 1000;
+		break;
+	default:  /* Other core voltage */
+		vdd = -EINVAL;
+		printf("%s: The VID(%x) isn't supported\n", __func__, vid);
+		break;
+	}
+	debug("%s: The required minimum volt of CORE is %dmV\n", __func__, vdd);
+
+	return vdd;
+}
+
+__weak int board_switch_core_volt(u32 vdd)
+{
+	return 0;
+}
+
+static int setup_core_volt(u32 vdd)
+{
+	return board_setup_core_volt(vdd);
+}
+
+#ifdef CONFIG_SYS_FSL_DDR
+static void ddr_enable_0v9_volt(bool en)
+{
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	u32 tmp;
+
+	tmp = ddr_in32(&ddr->ddr_cdr1);
+
+	if (en)
+		tmp |= DDR_CDR1_V0PT9_EN;
+	else
+		tmp &= ~DDR_CDR1_V0PT9_EN;
+
+	ddr_out32(&ddr->ddr_cdr1, tmp);
+}
+#endif
+
+int setup_chip_volt(void)
+{
+	int vdd;
+
+	vdd = get_core_volt_from_fuse();
+	/* Nothing to do for silicons doesn't support VID */
+	if (vdd < 0)
+		return vdd;
+
+	if (setup_core_volt(vdd))
+		printf("%s: Switch core VDD to %dmV failed\n", __func__, vdd);
+#ifdef CONFIG_SYS_HAS_SERDES
+	if (setup_serdes_volt(vdd))
+		printf("%s: Switch SVDD to %dmV failed\n", __func__, vdd);
+#endif
+
+#ifdef CONFIG_SYS_FSL_DDR
+	if (vdd == 900)
+		ddr_enable_0v9_volt(true);
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_FSL_PFE
+void init_pfe_scfg_dcfg_regs(void)
+{
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	u32 ecccr2;
+
+	out_be32(&scfg->pfeasbcr,
+		 in_be32(&scfg->pfeasbcr) | SCFG_PFEASBCR_AWCACHE0);
+	out_be32(&scfg->pfebsbcr,
+		 in_be32(&scfg->pfebsbcr) | SCFG_PFEASBCR_AWCACHE0);
+
+	/* CCI-400 QoS settings for PFE */
+	out_be32(&scfg->wr_qos1, (unsigned int)(SCFG_WR_QOS1_PFE1_QOS
+		 | SCFG_WR_QOS1_PFE2_QOS));
+	out_be32(&scfg->rd_qos1, (unsigned int)(SCFG_RD_QOS1_PFE1_QOS
+		 | SCFG_RD_QOS1_PFE2_QOS));
+
+	ecccr2 = in_be32(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2);
+	out_be32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2,
+		 ecccr2 | (unsigned int)DISABLE_PFE_ECC);
+}
+#endif
+
+void fsl_lsch2_early_init_f(void)
+{
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+					CONFIG_SYS_CCI400_OFFSET);
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+#if defined(CONFIG_FSL_QSPI) && defined(CONFIG_TFABOOT)
+	enum boot_src src;
+#endif
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
+#ifdef CONFIG_FSL_IFC
+	init_early_memctl_regs();	/* tighten IFC timing */
+#endif
+
+#if defined(CONFIG_FSL_QSPI) && defined(CONFIG_TFABOOT)
+	src = get_boot_src();
+	if (src != BOOT_SOURCE_QSPI_NOR)
+		out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
+#else
+#if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
+	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
+#endif
+#endif
+	/* Make SEC reads and writes snoopable */
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
+			SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP |
+			SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP |
+			SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP |
+			SCFG_SNPCNFGCR_USB3WRSNP | SCFG_SNPCNFGCR_SATARDSNP |
+			SCFG_SNPCNFGCR_SATAWRSNP);
+#elif defined(CONFIG_ARCH_LS1012A)
+	setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
+			SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP |
+			SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_SATARDSNP |
+			SCFG_SNPCNFGCR_SATAWRSNP);
+#else
+	setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
+		     SCFG_SNPCNFGCR_SECWRSNP |
+		     SCFG_SNPCNFGCR_SATARDSNP |
+		     SCFG_SNPCNFGCR_SATAWRSNP);
+#endif
+
+	/*
+	 * Enable snoop requests and DVM message requests for
+	 * Slave insterface S4 (A53 core cluster)
+	 */
+	if (current_el() == 3) {
+		out_le32(&cci->slave[4].snoop_ctrl,
+			 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+	}
+
+	/*
+	 * Program Central Security Unit (CSU) to grant access
+	 * permission for USB 2.0 controller
+	 */
+#if defined(CONFIG_ARCH_LS1012A) && defined(CONFIG_USB_EHCI_FSL)
+	if (current_el() == 3)
+		set_devices_ns_access(CSU_CSLX_USB_2, CSU_ALL_RW);
+#endif
+	/* Erratum */
+	erratum_a008850_early(); /* part 1 of 2 */
+	erratum_a009660();
+	erratum_a010539();
+	erratum_a009008();
+	erratum_a009798();
+	erratum_a008997();
+	erratum_a009007();
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	set_icids();
+#endif
+}
+#endif
+
+#ifdef CONFIG_FSPI_AHB_EN_4BYTE
+int fspi_ahb_init(void)
+{
+	/* Enable 4bytes address support and fast read */
+	u32 *fspi_lut, lut_key, *fspi_key;
+
+	fspi_key = (void *)SYS_NXP_FSPI_ADDR + SYS_NXP_FSPI_LUTKEY_BASE_ADDR;
+	fspi_lut = (void *)SYS_NXP_FSPI_ADDR + SYS_NXP_FSPI_LUT_BASE_ADDR;
+
+	lut_key = in_be32(fspi_key);
+
+	if (lut_key == SYS_NXP_FSPI_LUTKEY) {
+		/* That means the register is BE */
+		out_be32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+		/* Unlock the lut table */
+		out_be32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_UNLOCK);
+		/* Create READ LUT */
+		out_be32(fspi_lut, 0x0820040c);
+		out_be32(fspi_lut + 1, 0x24003008);
+		out_be32(fspi_lut + 2, 0x00000000);
+		/* Lock the lut table */
+		out_be32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+		out_be32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_LOCK);
+	} else {
+		/* That means the register is LE */
+		out_le32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+		/* Unlock the lut table */
+		out_le32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_UNLOCK);
+		/* Create READ LUT */
+		out_le32(fspi_lut, 0x0820040c);
+		out_le32(fspi_lut + 1, 0x24003008);
+		out_le32(fspi_lut + 2, 0x00000000);
+		/* Lock the lut table */
+		out_le32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+		out_le32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_LOCK);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_QSPI_AHB_INIT
+/* Enable 4bytes address support and fast read */
+int qspi_ahb_init(void)
+{
+	u32 *qspi_lut, lut_key, *qspi_key;
+
+	qspi_key = (void *)SYS_FSL_QSPI_ADDR + 0x300;
+	qspi_lut = (void *)SYS_FSL_QSPI_ADDR + 0x310;
+
+	lut_key = in_be32(qspi_key);
+
+	if (lut_key == 0x5af05af0) {
+		/* That means the register is BE */
+		out_be32(qspi_key, 0x5af05af0);
+		/* Unlock the lut table */
+		out_be32(qspi_key + 1, 0x00000002);
+		out_be32(qspi_lut, 0x0820040c);
+		out_be32(qspi_lut + 1, 0x1c080c08);
+		out_be32(qspi_lut + 2, 0x00002400);
+		/* Lock the lut table */
+		out_be32(qspi_key, 0x5af05af0);
+		out_be32(qspi_key + 1, 0x00000001);
+	} else {
+		/* That means the register is LE */
+		out_le32(qspi_key, 0x5af05af0);
+		/* Unlock the lut table */
+		out_le32(qspi_key + 1, 0x00000002);
+		out_le32(qspi_lut, 0x0820040c);
+		out_le32(qspi_lut + 1, 0x1c080c08);
+		out_le32(qspi_lut + 2, 0x00002400);
+		/* Lock the lut table */
+		out_le32(qspi_key, 0x5af05af0);
+		out_le32(qspi_key + 1, 0x00000001);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_TFABOOT
+#define MAX_BOOTCMD_SIZE	512
+
+int fsl_setenv_bootcmd(void)
+{
+	int ret;
+	enum boot_src src = get_boot_src();
+	char bootcmd_str[MAX_BOOTCMD_SIZE];
+
+	switch (src) {
+#ifdef IFC_NOR_BOOTCOMMAND
+	case BOOT_SOURCE_IFC_NOR:
+		sprintf(bootcmd_str, IFC_NOR_BOOTCOMMAND);
+		break;
+#endif
+#ifdef QSPI_NOR_BOOTCOMMAND
+	case BOOT_SOURCE_QSPI_NOR:
+		sprintf(bootcmd_str, QSPI_NOR_BOOTCOMMAND);
+		break;
+#endif
+#ifdef XSPI_NOR_BOOTCOMMAND
+	case BOOT_SOURCE_XSPI_NOR:
+		sprintf(bootcmd_str, XSPI_NOR_BOOTCOMMAND);
+		break;
+#endif
+#ifdef IFC_NAND_BOOTCOMMAND
+	case BOOT_SOURCE_IFC_NAND:
+		sprintf(bootcmd_str, IFC_NAND_BOOTCOMMAND);
+		break;
+#endif
+#ifdef QSPI_NAND_BOOTCOMMAND
+	case BOOT_SOURCE_QSPI_NAND:
+		sprintf(bootcmd_str, QSPI_NAND_BOOTCOMMAND);
+		break;
+#endif
+#ifdef XSPI_NAND_BOOTCOMMAND
+	case BOOT_SOURCE_XSPI_NAND:
+		sprintf(bootcmd_str, XSPI_NAND_BOOTCOMMAND);
+		break;
+#endif
+#ifdef SD_BOOTCOMMAND
+	case BOOT_SOURCE_SD_MMC:
+		sprintf(bootcmd_str, SD_BOOTCOMMAND);
+		break;
+#endif
+#ifdef SD2_BOOTCOMMAND
+	case BOOT_SOURCE_SD_MMC2:
+		sprintf(bootcmd_str, SD2_BOOTCOMMAND);
+		break;
+#endif
+	default:
+#ifdef QSPI_NOR_BOOTCOMMAND
+		sprintf(bootcmd_str, QSPI_NOR_BOOTCOMMAND);
+#endif
+		break;
+	}
+
+	ret = env_set("bootcmd", bootcmd_str);
+	if (ret) {
+		printf("Failed to set bootcmd: ret = %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+int fsl_setenv_mcinitcmd(void)
+{
+	int ret = 0;
+	enum boot_src src = get_boot_src();
+
+	switch (src) {
+#ifdef IFC_MC_INIT_CMD
+	case BOOT_SOURCE_IFC_NAND:
+	case BOOT_SOURCE_IFC_NOR:
+	ret = env_set("mcinitcmd", IFC_MC_INIT_CMD);
+		break;
+#endif
+#ifdef QSPI_MC_INIT_CMD
+	case BOOT_SOURCE_QSPI_NAND:
+	case BOOT_SOURCE_QSPI_NOR:
+	ret = env_set("mcinitcmd", QSPI_MC_INIT_CMD);
+		break;
+#endif
+#ifdef XSPI_MC_INIT_CMD
+	case BOOT_SOURCE_XSPI_NAND:
+	case BOOT_SOURCE_XSPI_NOR:
+	ret = env_set("mcinitcmd", XSPI_MC_INIT_CMD);
+		break;
+#endif
+#ifdef SD_MC_INIT_CMD
+	case BOOT_SOURCE_SD_MMC:
+	ret = env_set("mcinitcmd", SD_MC_INIT_CMD);
+		break;
+#endif
+#ifdef SD2_MC_INIT_CMD
+	case BOOT_SOURCE_SD_MMC2:
+	ret = env_set("mcinitcmd", SD2_MC_INIT_CMD);
+		break;
+#endif
+	default:
+#ifdef QSPI_MC_INIT_CMD
+	ret = env_set("mcinitcmd", QSPI_MC_INIT_CMD);
+#endif
+		break;
+	}
+
+	if (ret) {
+		printf("Failed to set mcinitcmd: ret = %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+__weak int fsl_board_late_init(void)
+{
+	return 0;
+}
+
+#define DWC3_GSBUSCFG0			0xc100
+#define DWC3_GSBUSCFG0_CACHETYPE_SHIFT	16
+#define DWC3_GSBUSCFG0_CACHETYPE(n)        (((n) & 0xffff)            \
+	<< DWC3_GSBUSCFG0_CACHETYPE_SHIFT)
+
+void enable_dwc3_snooping(void)
+{
+	int ret;
+	u32 val;
+	struct udevice *bus;
+	struct uclass *uc;
+	fdt_addr_t dwc3_base;
+
+	ret = uclass_get(UCLASS_USB, &uc);
+	if (ret)
+		return;
+
+	uclass_foreach_dev(bus, uc) {
+		if (!strcmp(bus->driver->of_match->compatible, "fsl,layerscape-dwc3")) {
+			dwc3_base = devfdt_get_addr(bus);
+			if (dwc3_base == FDT_ADDR_T_NONE) {
+				dev_err(bus, "dwc3 regs missing\n");
+				continue;
+			}
+			val = in_le32(dwc3_base + DWC3_GSBUSCFG0);
+			val &= ~DWC3_GSBUSCFG0_CACHETYPE(~0);
+			val |= DWC3_GSBUSCFG0_CACHETYPE(0x2222);
+			writel(val, dwc3_base + DWC3_GSBUSCFG0);
+		}
+	}
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CHAIN_OF_TRUST
+	fsl_setenv_chain_of_trust();
+#endif
+#ifdef CONFIG_TFABOOT
+	/*
+	 * Set bootcmd and mcinitcmd if they don't exist in the environment.
+	 */
+	if (!env_get("bootcmd"))
+		fsl_setenv_bootcmd();
+	if (!env_get("mcinitcmd"))
+		fsl_setenv_mcinitcmd();
+#endif
+#ifdef CONFIG_QSPI_AHB_INIT
+	qspi_ahb_init();
+#endif
+#ifdef CONFIG_FSPI_AHB_EN_4BYTE
+	fspi_ahb_init();
+#endif
+
+	if (IS_ENABLED(CONFIG_DM))
+		enable_dwc3_snooping();
+
+	return fsl_board_late_init();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/spintable.S b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/spintable.S
new file mode 100644
index 000000000..363ded03e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/spintable.S
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014-2015 Freescale Semiconductor
+ * Copyright 2019 NXP
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/system.h>
+#include <asm/arch/mp.h>
+
+.align 3
+.global secondary_boot_addr
+secondary_boot_addr:
+	.quad __secondary_boot_func
+
+.global secondary_boot_code_start
+secondary_boot_code_start:
+	.quad __secondary_boot_code_start
+
+.global secondary_boot_code_size
+secondary_boot_code_size:
+	.quad __secondary_boot_code_end - __secondary_boot_code_start
+
+	/* Using 64 bit alignment since the spin table is accessed as data */
+	.align 3
+	/* Secondary Boot Code starts here */
+__secondary_boot_code_start:
+__spin_table:
+	.space CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE
+
+	.align 2
+__secondary_boot_func:
+	/*
+	 * MPIDR_EL1 Fields:
+	 * MPIDR[1:0] = AFF0_CPUID <- Core ID (0,1)
+	 * MPIDR[7:2] = AFF0_RES
+	 * MPIDR[15:8] = AFF1_CLUSTERID <- Cluster ID (0,1,2,3)
+	 * MPIDR[23:16] = AFF2_CLUSTERID
+	 * MPIDR[24] = MT
+	 * MPIDR[29:25] = RES0
+	 * MPIDR[30] = U
+	 * MPIDR[31] = ME
+	 * MPIDR[39:32] = AFF3
+	 *
+	 * Linear Processor ID (LPID) calculation from MPIDR_EL1:
+	 * (We only use AFF0_CPUID and AFF1_CLUSTERID for now
+	 * until AFF2_CLUSTERID and AFF3 have non-zero values)
+	 *
+	 * LPID = MPIDR[15:8] | MPIDR[1:0]
+	 */
+	mrs	x0, mpidr_el1
+	ubfm	x1, x0, #8, #15
+	ubfm	x2, x0, #0, #1
+	orr	x10, x2, x1, lsl #2	/* x10 has LPID */
+	ubfm    x9, x0, #0, #15         /* x9 contains MPIDR[15:0] */
+	/*
+	 * offset of the spin table element for this core from start of spin
+	 * table (each elem is padded to 64 bytes)
+	 */
+	lsl	x1, x10, #6
+	adr	x0, __spin_table
+	/* physical address of this cpus spin table element */
+	add	x11, x1, x0
+
+	adr	x0, __real_cntfrq
+	ldr	x0, [x0]
+	msr	cntfrq_el0, x0	/* set with real frequency */
+	str	x9, [x11, #16]	/* LPID */
+	mov	x4, #1
+	str	x4, [x11, #8]	/* STATUS */
+	dsb	sy
+
+1:
+	wfe
+	ldr	x4, [x11]
+	cbz	x4, 1b
+	mrs     x1, sctlr_el2
+	tbz     x1, #25, 2f
+	rev     x4, x4                  /* BE to LE conversion */
+2:
+	ldr	x6, =ES_TO_AARCH64
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x5, 3f
+	switch_el x7, 0f, _dead_loop, _dead_loop
+0:	armv8_switch_to_el2_m x5, x6, x7
+#endif
+3:
+	ldr	x7, [x11, #24]	/* ARCH_COMP */
+	cbz	x7, 4f
+	ldr	x6, =ES_TO_AARCH32
+4:
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	switch_el x7, _dead_loop, 0f, _dead_loop
+0:	armv8_switch_to_el1_m x4, x6, x7
+#else
+	switch_el x7, 0f, _dead_loop, _dead_loop
+0:	armv8_switch_to_el2_m x4, x6, x7
+#endif
+
+_dead_loop:
+	wfe
+	b _dead_loop
+
+	/* Ensure that the literals used by the secondary boot code are
+	 * assembled within it (this is required so that we can protect
+	 * this area with a single memreserve region
+	 */
+	.ltorg
+
+	/* 64 bit alignment for elements accessed as data */
+	.align 3
+	.global __real_cntfrq
+__real_cntfrq:
+	.quad COUNTER_FREQUENCY
+	/* Secondary Boot Code ends here */
+__secondary_boot_code_end:
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/spl.c
new file mode 100644
index 000000000..b3f1148f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <cpu_func.h>
+#include <debug_uart.h>
+#include <env.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <fsl_ifc.h>
+#include <i2c.h>
+#include <fsl_csu.h>
+#include <asm/arch/fdt.h>
+#include <asm/arch/ppa.h>
+#include <asm/arch/soc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 spl_boot_device(void)
+{
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	return BOOT_DEVICE_MMC1;
+#endif
+#ifdef CONFIG_SPL_NAND_SUPPORT
+	return BOOT_DEVICE_NAND;
+#endif
+#ifdef CONFIG_QSPI_BOOT
+	return BOOT_DEVICE_NOR;
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+
+void spl_board_init(void)
+{
+#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_LSCH2)
+	/*
+	 * In case of Secure Boot, the IBR configures the SMMU
+	 * to allow only Secure transactions.
+	 * SMMU must be reset in bypass mode.
+	 * Set the ClientPD bit and Clear the USFCFG Bit
+	*/
+	u32 val;
+	val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+	out_le32(SMMU_SCR0, val);
+	val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+	out_le32(SMMU_NSCR0, val);
+#endif
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+#ifdef CONFIG_SPL_FSL_LS_PPA
+	ppa_init();
+#endif
+}
+
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+	icache_enable();
+	/* Clear global data */
+	memset((void *)gd, 0, sizeof(gd_t));
+	if (IS_ENABLED(CONFIG_DEBUG_UART))
+		debug_uart_init();
+	board_early_init_f();
+	ret = spl_early_init();
+	if (ret) {
+		debug("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+	timer_init();
+#ifdef CONFIG_ARCH_LS2080A
+	env_init();
+#endif
+	get_clocks();
+
+	preloader_console_init();
+	spl_set_bd();
+
+#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SPL_I2C_SUPPORT
+	i2c_init_all();
+#endif
+#endif
+#ifdef CONFIG_VID
+	init_func_vid();
+#endif
+	dram_init();
+#ifdef CONFIG_SPL_FSL_LS_PPA
+#ifndef CONFIG_SYS_MEM_RESERVE_SECURE
+#error Need secure RAM for PPA
+#endif
+	/*
+	 * Secure memory location is determined in dram_init_banksize().
+	 * gd->ram_size is deducted by the size of secure ram.
+	 */
+	dram_init_banksize();
+
+	/*
+	 * After dram_init_bank_size(), we know U-Boot only uses the first
+	 * memory bank regardless how big the memory is.
+	 */
+	gd->ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
+
+	/*
+	 * If PPA is loaded, U-Boot will resume running at EL2.
+	 * Cache and MMU will be enabled. Need a place for TLB.
+	 * U-Boot will be relocated to the end of available memory
+	 * in first bank. At this point, we cannot know how much
+	 * memory U-Boot uses. Put TLB table lower by SPL_TLB_SETBACK
+	 * to avoid overlapping. As soon as the RAM version U-Boot sets
+	 * up new MMU, this space is no longer needed.
+	 */
+	gd->ram_top -= SPL_TLB_SETBACK;
+	gd->arch.tlb_size = PGTABLE_SIZE;
+	gd->arch.tlb_addr = (gd->ram_top - gd->arch.tlb_size) & ~(0x10000 - 1);
+	gd->arch.tlb_allocated = gd->arch.tlb_addr;
+#endif	/* CONFIG_SPL_FSL_LS_PPA */
+#if defined(CONFIG_QSPI_AHB_INIT) && defined(CONFIG_QSPI_BOOT)
+	qspi_ahb_init();
+#endif
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * Return
+ * 0 if booting into OS is selected
+ * 1 if booting into U-Boot is selected
+ */
+int spl_start_uboot(void)
+{
+	env_init();
+	if (env_get_yesno("boot_os") != 0)
+		return 0;
+
+	return 1;
+}
+#endif	/* CONFIG_SPL_OS_BOOT */
+#endif /* CONFIG_SPL_BUILD */
diff --git a/roms/u-boot/arch/arm/cpu/armv8/fwcall.c b/roms/u-boot/arch/arm/cpu/armv8/fwcall.c
new file mode 100644
index 000000000..16914dc1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/fwcall.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ * (C) Copyright 2014, Cavium Inc.
+ * (C) Copyright 2017, Xilinx Inc.
+ *
+**/
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/cache.h>
+#include <asm/macro.h>
+#include <asm/psci.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+/*
+ * Issue the hypervisor call
+ *
+ * x0~x7: input arguments
+ * x0~x3: output arguments
+ */
+static void hvc_call(struct pt_regs *args)
+{
+	asm volatile(
+		"ldr x0, %0\n"
+		"ldr x1, %1\n"
+		"ldr x2, %2\n"
+		"ldr x3, %3\n"
+		"ldr x4, %4\n"
+		"ldr x5, %5\n"
+		"ldr x6, %6\n"
+		"hvc	#0\n"
+		"str x0, %0\n"
+		"str x1, %1\n"
+		"str x2, %2\n"
+		"str x3, %3\n"
+		: "+m" (args->regs[0]), "+m" (args->regs[1]),
+		  "+m" (args->regs[2]), "+m" (args->regs[3])
+		: "m" (args->regs[4]), "m" (args->regs[5]),
+		  "m" (args->regs[6])
+		: "x0", "x1", "x2", "x3", "x4", "x5", "x6", "x7",
+		  "x8", "x9", "x10", "x11", "x12", "x13", "x14", "x15",
+		  "x16", "x17");
+}
+
+/*
+ * void smc_call(arg0, arg1...arg7)
+ *
+ * issue the secure monitor call
+ *
+ * x0~x7: input arguments
+ * x0~x3: output arguments
+ */
+
+void smc_call(struct pt_regs *args)
+{
+	asm volatile(
+		"ldr x0, %0\n"
+		"ldr x1, %1\n"
+		"ldr x2, %2\n"
+		"ldr x3, %3\n"
+		"ldr x4, %4\n"
+		"ldr x5, %5\n"
+		"ldr x6, %6\n"
+		"smc	#0\n"
+		"str x0, %0\n"
+		"str x1, %1\n"
+		"str x2, %2\n"
+		"str x3, %3\n"
+		: "+m" (args->regs[0]), "+m" (args->regs[1]),
+		  "+m" (args->regs[2]), "+m" (args->regs[3])
+		: "m" (args->regs[4]), "m" (args->regs[5]),
+		  "m" (args->regs[6])
+		: "x0", "x1", "x2", "x3", "x4", "x5", "x6", "x7",
+		  "x8", "x9", "x10", "x11", "x12", "x13", "x14", "x15",
+		  "x16", "x17");
+}
+
+/*
+ * For now, all systems we support run at least in EL2 and thus
+ * trigger PSCI calls to EL3 using SMC. If anyone ever wants to
+ * use PSCI on U-Boot running below a hypervisor, please detect
+ * this and set the flag accordingly.
+ */
+static const bool use_smc_for_psci = true;
+
+void __noreturn psci_system_reset(void)
+{
+	struct pt_regs regs;
+
+	regs.regs[0] = ARM_PSCI_0_2_FN_SYSTEM_RESET;
+
+	if (use_smc_for_psci)
+		smc_call(&regs);
+	else
+		hvc_call(&regs);
+
+	while (1)
+		;
+}
+
+void __noreturn psci_system_reset2(u32 reset_level, u32 cookie)
+{
+	struct pt_regs regs;
+
+	regs.regs[0] = ARM_PSCI_0_2_FN64_SYSTEM_RESET2;
+	regs.regs[1] = PSCI_RESET2_TYPE_VENDOR | reset_level;
+	regs.regs[2] = cookie;
+	if (use_smc_for_psci)
+		smc_call(&regs);
+	else
+		hvc_call(&regs);
+
+	while (1)
+		;
+}
+
+void __noreturn psci_system_off(void)
+{
+	struct pt_regs regs;
+
+	regs.regs[0] = ARM_PSCI_0_2_FN_SYSTEM_OFF;
+
+	if (use_smc_for_psci)
+		smc_call(&regs);
+	else
+		hvc_call(&regs);
+
+	while (1)
+		;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/generic_timer.c b/roms/u-boot/arch/arm/cpu/armv8/generic_timer.c
new file mode 100644
index 000000000..f27a74b9d
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/generic_timer.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <common.h>
+#include <bootstage.h>
+#include <command.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/system.h>
+#include <linux/bitops.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Generic timer implementation of get_tbclk()
+ */
+unsigned long get_tbclk(void)
+{
+	unsigned long cntfrq;
+	asm volatile("mrs %0, cntfrq_el0" : "=r" (cntfrq));
+	return cntfrq;
+}
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008585
+/*
+ * FSL erratum A-008585 says that the ARM generic timer counter "has the
+ * potential to contain an erroneous value for a small number of core
+ * clock cycles every time the timer value changes".
+ * This sometimes leads to a consecutive counter read returning a lower
+ * value than the previous one, thus reporting the time to go backwards.
+ * The workaround is to read the counter twice and only return when the value
+ * was the same in both reads.
+ * Assumes that the CPU runs in much higher frequency than the timer.
+ */
+unsigned long timer_read_counter(void)
+{
+	unsigned long cntpct;
+	unsigned long temp;
+
+	isb();
+	asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+	asm volatile("mrs %0, cntpct_el0" : "=r" (temp));
+	while (temp != cntpct) {
+		asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+		asm volatile("mrs %0, cntpct_el0" : "=r" (temp));
+	}
+
+	return cntpct;
+}
+#elif CONFIG_SUNXI_A64_TIMER_ERRATUM
+/*
+ * This erratum sometimes flips the lower 11 bits of the counter value
+ * to all 0's or all 1's, leading to jumps forwards or backwards.
+ * Backwards jumps might be interpreted all roll-overs and be treated as
+ * huge jumps forward.
+ * The workaround is to check whether the lower 11 bits of the counter are
+ * all 0 or all 1, then discard this value and read again.
+ * This occasionally discards valid values, but will catch all erroneous
+ * reads and fixes the problem reliably. Also this mostly requires only a
+ * single read, so does not have any significant overhead.
+ * The algorithm was conceived by Samuel Holland.
+ */
+unsigned long timer_read_counter(void)
+{
+	unsigned long cntpct;
+
+	isb();
+	do {
+		asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+	} while (((cntpct + 1) & GENMASK(10, 0)) <= 1);
+
+	return cntpct;
+}
+#else
+/*
+ * timer_read_counter() using the Arm Generic Timer (aka arch timer).
+ */
+unsigned long timer_read_counter(void)
+{
+	unsigned long cntpct;
+
+	isb();
+	asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+
+	return cntpct;
+}
+#endif
+
+uint64_t get_ticks(void)
+{
+	unsigned long ticks = timer_read_counter();
+
+	gd->arch.tbl = ticks;
+
+	return ticks;
+}
+
+unsigned long usec2ticks(unsigned long usec)
+{
+	ulong ticks;
+	if (usec < 1000)
+		ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+	else
+		ticks = ((usec / 10) * (get_tbclk() / 100000));
+
+	return ticks;
+}
+
+ulong timer_get_boot_us(void)
+{
+	u64 val = get_ticks() * 1000000;
+
+	return val / get_tbclk();
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/hisilicon/Makefile b/roms/u-boot/arch/arm/cpu/armv8/hisilicon/Makefile
new file mode 100644
index 000000000..cf2fe05f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/hisilicon/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2015 Linaro
+# Peter Griffin <peter.griffin@linaro.org>
+
+obj-y	+= pinmux.o
diff --git a/roms/u-boot/arch/arm/cpu/armv8/hisilicon/pinmux.c b/roms/u-boot/arch/arm/cpu/armv8/hisilicon/pinmux.c
new file mode 100644
index 000000000..5183e00a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/hisilicon/pinmux.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Linaro.
+ * Peter Griffin <peter.griffin@linaro.org>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <log.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+#include <linux/bitops.h>
+
+struct hi6220_pinmux0_regs *pmx0 =
+	(struct hi6220_pinmux0_regs *)HI6220_PINMUX0_BASE;
+
+struct hi6220_pinmux1_regs *pmx1 =
+	(struct hi6220_pinmux1_regs *)HI6220_PINMUX1_BASE;
+
+static void hi6220_uart_config(int peripheral)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		writel(MUX_M0, &pmx0->iomg[48]); /* UART0_RXD */
+		writel(MUX_M0, &pmx0->iomg[49]); /* UART0_TXD */
+
+		writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[49]); /* UART0_RXD */
+		writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[50]); /* UART0_TXD */
+		break;
+
+	case PERIPH_ID_UART1:
+		writel(MUX_M0, &pmx0->iomg[50]); /* UART1_CTS_N */
+		writel(MUX_M0, &pmx0->iomg[51]); /* UART1_RTS_N */
+		writel(MUX_M0, &pmx0->iomg[52]); /* UART1_RXD */
+		writel(MUX_M0, &pmx0->iomg[53]); /* UART1_TXD */
+
+		writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[51]); /*UART1_CTS_N*/
+		writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[53]); /* UART1_RXD */
+		writel(DRIVE1_02MA, &pmx1->iocfg[52]); /* UART1_RTS_N */
+		writel(DRIVE1_02MA, &pmx1->iocfg[54]); /* UART1_TXD */
+		break;
+
+	case PERIPH_ID_UART2:
+		writel(MUX_M0, &pmx0->iomg[54]); /* UART2_CTS_N */
+		writel(MUX_M0, &pmx0->iomg[55]); /* UART2_RTS_N */
+		writel(MUX_M0, &pmx0->iomg[56]); /* UART2_RXD */
+		writel(MUX_M0, &pmx0->iomg[57]); /* UART2_TXD */
+
+		writel(DRIVE1_02MA, &pmx1->iocfg[55]); /* UART2_CTS_N */
+		writel(DRIVE1_02MA, &pmx1->iocfg[56]); /* UART2_RTS_N */
+		writel(DRIVE1_02MA, &pmx1->iocfg[57]); /* UART2_RXD */
+		writel(DRIVE1_02MA, &pmx1->iocfg[58]); /* UART2_TXD */
+		break;
+
+	case PERIPH_ID_UART3:
+		writel(MUX_M1, &pmx0->iomg[96]); /* UART3_CTS_N */
+		writel(MUX_M1, &pmx0->iomg[97]); /* UART3_RTS_N */
+		writel(MUX_M1, &pmx0->iomg[98]); /* UART3_RXD */
+		writel(MUX_M1, &pmx0->iomg[99]); /* UART3_TXD */
+
+		/* UART3_TXD */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[100]);
+		/* UART3_RTS_N */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[101]);
+		/* UART3_RXD */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[102]);
+		/* UART3_TXD */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[103]);
+		break;
+
+	case PERIPH_ID_UART4:
+		writel(MUX_M1, &pmx0->iomg[116]); /* UART4_CTS_N */
+		writel(MUX_M1, &pmx0->iomg[117]); /* UART4_RTS_N */
+		writel(MUX_M1, &pmx0->iomg[118]); /* UART4_RXD */
+		writel(MUX_M1, &pmx0->iomg[119]); /* UART4_TXD */
+
+		/* UART4_CTS_N */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[120]);
+		/* UART4_RTS_N */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[121]);
+		/* UART4_RXD */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[122]);
+		/* UART4_TXD */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[123]);
+		break;
+	case PERIPH_ID_UART5:
+		writel(MUX_M1, &pmx0->iomg[114]); /* UART5_RXD */
+		writel(MUX_M1, &pmx0->iomg[115]); /* UART5_TXD */
+
+		/* UART5_RXD */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[118]);
+		/* UART5_TXD */
+		writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[119]);
+
+		break;
+
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
+	}
+}
+
+static int hi6220_mmc_config(int peripheral)
+{
+	u32 tmp;
+
+	switch (peripheral) {
+	case PERIPH_ID_SDMMC0:
+
+		/* eMMC pinmux config */
+		writel(MUX_M0, &pmx0->iomg[64]); /* EMMC_CLK */
+		writel(MUX_M0, &pmx0->iomg[65]); /* EMMC_CMD */
+		writel(MUX_M0, &pmx0->iomg[66]); /* EMMC_DATA0 */
+		writel(MUX_M0, &pmx0->iomg[67]); /* EMMC_DATA1 */
+		writel(MUX_M0, &pmx0->iomg[68]); /* EMMC_DATA2 */
+		writel(MUX_M0, &pmx0->iomg[69]); /* EMMC_DATA3 */
+		writel(MUX_M0, &pmx0->iomg[70]); /* EMMC_DATA4 */
+		writel(MUX_M0, &pmx0->iomg[71]); /* EMMC_DATA5 */
+		writel(MUX_M0, &pmx0->iomg[72]); /* EMMC_DATA6 */
+		writel(MUX_M0, &pmx0->iomg[73]); /* EMMC_DATA7 */
+
+		/*eMMC configure up/down/drive */
+		writel(DRIVE1_08MA, &pmx1->iocfg[65]); /* EMMC_CLK */
+
+		tmp = DRIVE1_04MA | PULL_UP;
+		writel(tmp, &pmx1->iocfg[65]); /* EMMC_CMD */
+		writel(tmp, &pmx1->iocfg[66]); /* EMMC_DATA0 */
+		writel(tmp, &pmx1->iocfg[67]); /* EMMC_DATA1 */
+		writel(tmp, &pmx1->iocfg[68]); /* EMMC_DATA2 */
+		writel(tmp, &pmx1->iocfg[69]); /* EMMC_DATA3 */
+		writel(tmp, &pmx1->iocfg[70]); /* EMMC_DATA4 */
+		writel(tmp, &pmx1->iocfg[71]); /* EMMC_DATA5 */
+		writel(tmp, &pmx1->iocfg[72]); /* EMMC_DATA6 */
+		writel(tmp, &pmx1->iocfg[73]); /* EMMC_DATA7 */
+
+		writel(DRIVE1_04MA, &pmx1->iocfg[73]); /* EMMC_RST_N */
+		break;
+
+	case PERIPH_ID_SDMMC1:
+
+		writel(MUX_M0, &pmx0->iomg[3]); /* SD_CLK */
+		writel(MUX_M0, &pmx0->iomg[4]); /* SD_CMD */
+		writel(MUX_M0, &pmx0->iomg[5]); /* SD_DATA0 */
+		writel(MUX_M0, &pmx0->iomg[6]); /* SD_DATA1 */
+		writel(MUX_M0, &pmx0->iomg[7]); /* SD_DATA2 */
+		writel(MUX_M0, &pmx0->iomg[8]); /* SD_DATA3 */
+
+		writel(DRIVE1_10MA | BIT(2), &pmx1->iocfg[3]); /*SD_CLK*/
+		writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[4]); /*SD_CMD*/
+		writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[5]); /*SD_DATA0*/
+		writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[6]); /*SD_DATA1*/
+		writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[7]); /*SD_DATA2*/
+		writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[8]); /*SD_DATA3*/
+		break;
+
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
+int hi6220_pinmux_config(int peripheral)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		hi6220_uart_config(peripheral);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+		return hi6220_mmc_config(peripheral);
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
+
diff --git a/roms/u-boot/arch/arm/cpu/armv8/linux-kernel-image-header-vars.h b/roms/u-boot/arch/arm/cpu/armv8/linux-kernel-image-header-vars.h
new file mode 100644
index 000000000..b4220e493
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/linux-kernel-image-header-vars.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2017 NVIDIA Corporation <www.nvidia.com>
+ *
+ * Derived from Linux kernel v4.14 files:
+ *
+ * arch/arm64/include/asm/assembler.h:
+ * Based on arch/arm/include/asm/assembler.h, arch/arm/mm/proc-macros.S
+ * Copyright (C) 1996-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * arch/arm64/kernel/head.S:
+ * Based on arch/arm/kernel/head.S
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (C) 2003-2012 ARM Ltd.
+ * Authors:	Catalin Marinas <catalin.marinas@arm.com>
+ *		Will Deacon <will.deacon@arm.com>
+ *
+ * arch/arm64/kernel/image.h:
+ * Copyright (C) 2014 ARM Ltd.
+ */
+
+/*
+ * There aren't any ELF relocations we can use to endian-swap values known only
+ * at link time (e.g. the subtraction of two symbol addresses), so we must get
+ * the linker to endian-swap certain values before emitting them.
+ *
+ * Note that, in order for this to work when building the ELF64 PIE executable
+ * (for KASLR), these values should not be referenced via R_AARCH64_ABS64
+ * relocations, since these are fixed up at runtime rather than at build time
+ * when PIE is in effect. So we need to split them up in 32-bit high and low
+ * words.
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define DATA_LE32(data)				\
+	((((data) & 0x000000ff) << 24) |	\
+	 (((data) & 0x0000ff00) << 8)  |	\
+	 (((data) & 0x00ff0000) >> 8)  |	\
+	 (((data) & 0xff000000) >> 24))
+#else
+#define DATA_LE32(data) ((data) & 0xffffffff)
+#endif
+
+#define DEFINE_IMAGE_LE64(sym, data)				\
+	sym##_lo32 = DATA_LE32((data) & 0xffffffff);		\
+	sym##_hi32 = DATA_LE32((data) >> 32)
+
+#define __MAX(a, b)		(((a) > (b)) ? (a) : (b))
+#define __CODE_DATA_SIZE	(__bss_start - _start)
+#define __BSS_SIZE		(__bss_end - __bss_start)
+#ifdef CONFIG_INIT_SP_RELATIVE
+#define __MAX_EXTRA_RAM_USAGE	__MAX(__BSS_SIZE, CONFIG_SYS_INIT_SP_BSS_OFFSET)
+#else
+#define __MAX_EXTRA_RAM_USAGE	__BSS_SIZE
+#endif
+#define __MEM_USAGE		(__CODE_DATA_SIZE + __MAX_EXTRA_RAM_USAGE)
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define __HEAD_FLAG_BE		1
+#else
+#define __HEAD_FLAG_BE		0
+#endif
+
+#define __HEAD_FLAG_PAGE_SIZE	1 /* 4K hard-coded */
+
+#define __HEAD_FLAG_PHYS_BASE	1
+
+#define __HEAD_FLAGS		((__HEAD_FLAG_BE << 0) |	\
+				 (__HEAD_FLAG_PAGE_SIZE << 1) |	\
+				 (__HEAD_FLAG_PHYS_BASE << 3))
+
+#define TEXT_OFFSET (CONFIG_SYS_TEXT_BASE - \
+			CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE)
+
+/*
+ * These will output as part of the Image header, which should be little-endian
+ * regardless of the endianness of the kernel. While constant values could be
+ * endian swapped in head.S, all are done here for consistency.
+ */
+#define HEAD_SYMBOLS						\
+	DEFINE_IMAGE_LE64(_kernel_size_le, __MEM_USAGE);	\
+	DEFINE_IMAGE_LE64(_kernel_offset_le, TEXT_OFFSET);	\
+	DEFINE_IMAGE_LE64(_kernel_flags_le, __HEAD_FLAGS);
+
+	HEAD_SYMBOLS
diff --git a/roms/u-boot/arch/arm/cpu/armv8/lowlevel_init.S b/roms/u-boot/arch/arm/cpu/armv8/lowlevel_init.S
new file mode 100644
index 000000000..f4f0cdce9
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/lowlevel_init.S
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * A lowlevel_init function that sets up the stack to call a C function to
+ * perform further init.
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	/*
+	 * Setup a temporary stack. Global data is not available yet.
+	 */
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+	ldr	w0, =CONFIG_SPL_STACK
+#else
+	ldr	w0, =CONFIG_SYS_INIT_SP_ADDR
+#endif
+	bic	sp, x0, #0xf	/* 16-byte alignment for ABI compliance */
+
+	/*
+	 * Save the old LR(passed in x29) and the current LR to stack
+	 */
+	stp	x29, x30, [sp, #-16]!
+
+	/*
+	 * Call the very early init function. This should do only the
+	 * absolute bare minimum to get started. It should not:
+	 *
+	 * - set up DRAM
+	 * - use global_data
+	 * - clear BSS
+	 * - try to start a console
+	 *
+	 * For boards with SPL this should be empty since SPL can do all of
+	 * this init in the SPL board_init_f() function which is called
+	 * immediately after this.
+	 */
+	bl	s_init
+	ldp	x29, x30, [sp]
+	ret
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/cpu/armv8/psci.S b/roms/u-boot/arch/arm/cpu/armv8/psci.S
new file mode 100644
index 000000000..7ffc8dbad
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/psci.S
@@ -0,0 +1,331 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Author: Hongbo Zhang <hongbo.zhang@nxp.com>
+ * This file implements LS102X platform PSCI SYSTEM-SUSPEND function
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/psci.h>
+#include <asm/secure.h>
+
+/* Default PSCI function, return -1, Not Implemented */
+#define PSCI_DEFAULT(__fn) \
+	ENTRY(__fn); \
+	mov	w0, #ARM_PSCI_RET_NI; \
+	ret; \
+	ENDPROC(__fn); \
+	.weak __fn
+
+/* PSCI function and ID table definition*/
+#define PSCI_TABLE(__id, __fn) \
+	.quad __id; \
+	.quad __fn
+
+.pushsection ._secure.text, "ax"
+
+/* 32 bits PSCI default functions */
+PSCI_DEFAULT(psci_version)
+PSCI_DEFAULT(psci_cpu_suspend)
+PSCI_DEFAULT(psci_cpu_off)
+PSCI_DEFAULT(psci_cpu_on)
+PSCI_DEFAULT(psci_affinity_info)
+PSCI_DEFAULT(psci_migrate)
+PSCI_DEFAULT(psci_migrate_info_type)
+PSCI_DEFAULT(psci_migrate_info_up_cpu)
+PSCI_DEFAULT(psci_system_off)
+PSCI_DEFAULT(psci_system_reset)
+PSCI_DEFAULT(psci_features)
+PSCI_DEFAULT(psci_cpu_freeze)
+PSCI_DEFAULT(psci_cpu_default_suspend)
+PSCI_DEFAULT(psci_node_hw_state)
+PSCI_DEFAULT(psci_system_suspend)
+PSCI_DEFAULT(psci_set_suspend_mode)
+PSCI_DEFAULT(psi_stat_residency)
+PSCI_DEFAULT(psci_stat_count)
+
+.align 3
+_psci_32_table:
+PSCI_TABLE(ARM_PSCI_FN_CPU_SUSPEND, psci_cpu_suspend)
+PSCI_TABLE(ARM_PSCI_FN_CPU_OFF, psci_cpu_off)
+PSCI_TABLE(ARM_PSCI_FN_CPU_ON, psci_cpu_on)
+PSCI_TABLE(ARM_PSCI_FN_MIGRATE, psci_migrate)
+PSCI_TABLE(ARM_PSCI_0_2_FN_PSCI_VERSION, psci_version)
+PSCI_TABLE(ARM_PSCI_0_2_FN_CPU_SUSPEND, psci_cpu_suspend)
+PSCI_TABLE(ARM_PSCI_0_2_FN_CPU_OFF, psci_cpu_off)
+PSCI_TABLE(ARM_PSCI_0_2_FN_CPU_ON, psci_cpu_on)
+PSCI_TABLE(ARM_PSCI_0_2_FN_AFFINITY_INFO, psci_affinity_info)
+PSCI_TABLE(ARM_PSCI_0_2_FN_MIGRATE, psci_migrate)
+PSCI_TABLE(ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE, psci_migrate_info_type)
+PSCI_TABLE(ARM_PSCI_0_2_FN_MIGRATE_INFO_UP_CPU, psci_migrate_info_up_cpu)
+PSCI_TABLE(ARM_PSCI_0_2_FN_SYSTEM_OFF, psci_system_off)
+PSCI_TABLE(ARM_PSCI_0_2_FN_SYSTEM_RESET, psci_system_reset)
+PSCI_TABLE(ARM_PSCI_1_0_FN_PSCI_FEATURES, psci_features)
+PSCI_TABLE(ARM_PSCI_1_0_FN_CPU_FREEZE, psci_cpu_freeze)
+PSCI_TABLE(ARM_PSCI_1_0_FN_CPU_DEFAULT_SUSPEND, psci_cpu_default_suspend)
+PSCI_TABLE(ARM_PSCI_1_0_FN_NODE_HW_STATE, psci_node_hw_state)
+PSCI_TABLE(ARM_PSCI_1_0_FN_SYSTEM_SUSPEND, psci_system_suspend)
+PSCI_TABLE(ARM_PSCI_1_0_FN_SET_SUSPEND_MODE, psci_set_suspend_mode)
+PSCI_TABLE(ARM_PSCI_1_0_FN_STAT_RESIDENCY, psi_stat_residency)
+PSCI_TABLE(ARM_PSCI_1_0_FN_STAT_COUNT, psci_stat_count)
+PSCI_TABLE(0, 0)
+
+/* 64 bits PSCI default functions */
+PSCI_DEFAULT(psci_cpu_suspend_64)
+PSCI_DEFAULT(psci_cpu_on_64)
+PSCI_DEFAULT(psci_affinity_info_64)
+PSCI_DEFAULT(psci_migrate_64)
+PSCI_DEFAULT(psci_migrate_info_up_cpu_64)
+PSCI_DEFAULT(psci_cpu_default_suspend_64)
+PSCI_DEFAULT(psci_node_hw_state_64)
+PSCI_DEFAULT(psci_system_suspend_64)
+PSCI_DEFAULT(psci_stat_residency_64)
+PSCI_DEFAULT(psci_stat_count_64)
+
+.align 3
+_psci_64_table:
+PSCI_TABLE(ARM_PSCI_0_2_FN64_CPU_SUSPEND, psci_cpu_suspend_64)
+PSCI_TABLE(ARM_PSCI_0_2_FN64_CPU_ON, psci_cpu_on_64)
+PSCI_TABLE(ARM_PSCI_0_2_FN64_AFFINITY_INFO, psci_affinity_info_64)
+PSCI_TABLE(ARM_PSCI_0_2_FN64_MIGRATE, psci_migrate_64)
+PSCI_TABLE(ARM_PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU, psci_migrate_info_up_cpu_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_CPU_DEFAULT_SUSPEND, psci_cpu_default_suspend_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_NODE_HW_STATE, psci_node_hw_state_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_SYSTEM_SUSPEND, psci_system_suspend_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_STAT_RESIDENCY, psci_stat_residency_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_STAT_COUNT, psci_stat_count_64)
+PSCI_TABLE(0, 0)
+
+.macro	psci_enter
+	/* PSCI call is Fast Call(atomic), so mask DAIF */
+	mrs	x15, DAIF
+	stp	x15, xzr, [sp, #-16]!
+	ldr	x15, =0x3C0
+	msr	DAIF, x15
+	/* SMC convention, x18 ~ x30 should be saved by callee */
+	stp	x29, x30, [sp, #-16]!
+	stp	x27, x28, [sp, #-16]!
+	stp	x25, x26, [sp, #-16]!
+	stp	x23, x24, [sp, #-16]!
+	stp	x21, x22, [sp, #-16]!
+	stp	x19, x20, [sp, #-16]!
+	mrs	x15, elr_el3
+	stp	x18, x15, [sp, #-16]!
+.endm
+
+.macro	psci_return
+	/* restore registers */
+	ldp	x18, x15, [sp], #16
+	msr	elr_el3, x15
+	ldp	x19, x20, [sp], #16
+	ldp	x21, x22, [sp], #16
+	ldp	x23, x24, [sp], #16
+	ldp	x25, x26, [sp], #16
+	ldp	x27, x28, [sp], #16
+	ldp	x29, x30, [sp], #16
+	/* restore DAIF */
+	ldp	x15, xzr, [sp], #16
+	msr	DAIF, x15
+	eret
+.endm
+
+/* Caller must put PSCI function-ID table base in x9 */
+handle_psci:
+	psci_enter
+1:	ldr	x10, [x9]		/* Load PSCI function table */
+	cbz	x10, 3f			/* If reach the end, bail out */
+	cmp	x10, x0
+	b.eq	2f			/* PSCI function found */
+	add x9, x9, #16			/* If not match, try next entry */
+	b	1b
+
+2:	ldr	x11, [x9, #8]		/* Load PSCI function */
+	blr	x11			/* Call PSCI function */
+	psci_return
+
+3:	mov	x0, #ARM_PSCI_RET_NI
+	psci_return
+
+/*
+ * Handle SiP service functions defined in SiP service function table.
+ * Use DECLARE_SECURE_SVC(_name, _id, _fn) to add platform specific SiP
+ * service function into the SiP service function table.
+ * SiP service function table is located in '._secure_svc_tbl_entries' section,
+ * which is next to '._secure.text' section.
+ */
+handle_svc:
+	adr	x9, __secure_svc_tbl_start
+	adr	x10, __secure_svc_tbl_end
+	subs	x12, x10, x9	/* Get number of entries in table */
+	b.eq	2f		/* Make sure SiP function table is not empty */
+	psci_enter
+1:	ldr x10, [x9]		/* Load SiP function table */
+	ldr x11, [x9, #8]
+	cmp	w10, w0
+	b.eq	2b		/* SiP service function found */
+	add x9, x9, #SECURE_SVC_TBL_OFFSET	/* Move to next entry */
+	subs	x12, x12, #SECURE_SVC_TBL_OFFSET
+	b.eq	3b		/* If reach the end, bail out */
+	b	1b
+2:	ldr	x0, =0xFFFFFFFF
+	eret
+
+handle_smc32:
+	/* SMC function ID  0x84000000-0x8400001F: 32 bits PSCI */
+	ldr	w9, =0x8400001F
+	cmp	w0, w9
+	b.gt	handle_svc
+	ldr	w9, =0x84000000
+	cmp	w0, w9
+	b.lt	handle_svc
+
+	adr	x9, _psci_32_table
+	b	handle_psci
+
+handle_smc64:
+	/* check SMC32 or SMC64 calls */
+	ubfx	x9, x0, #30, #1
+	cbz	x9, handle_smc32
+
+	/* SMC function ID 0xC4000000-0xC400001F: 64 bits PSCI */
+	ldr	x9, =0xC400001F
+	cmp	x0, x9
+	b.gt	handle_svc
+	ldr	x9, =0xC4000000
+	cmp	x0, x9
+	b.lt	handle_svc
+
+	adr	x9, _psci_64_table
+	b	handle_psci
+
+/*
+ * Get CPU ID from MPIDR, suppose every cluster has same number of CPU cores,
+ * Platform with asymmetric clusters should implement their own interface.
+ * In case this function being called by other platform's C code, the ARM
+ * Architecture Procedure Call Standard is considered, e.g. register X0 is
+ * used for the return value, while in this PSCI environment, X0 usually holds
+ * the SMC function identifier, so X0 should be saved by caller function.
+ */
+ENTRY(psci_get_cpu_id)
+#ifdef CONFIG_ARMV8_PSCI_CPUS_PER_CLUSTER
+	mrs	x9, MPIDR_EL1
+	ubfx	x9, x9, #8, #8
+	ldr	x10, =CONFIG_ARMV8_PSCI_CPUS_PER_CLUSTER
+	mul	x9, x10, x9
+#else
+	mov	x9, xzr
+#endif
+	mrs	x10, MPIDR_EL1
+	ubfx	x10, x10, #0, #8
+	add	x0, x10, x9
+	ret
+ENDPROC(psci_get_cpu_id)
+.weak psci_get_cpu_id
+
+/* CPU ID input in x0, stack top output in x0*/
+LENTRY(psci_get_cpu_stack_top)
+	adr	x9, __secure_stack_end
+	lsl	x0, x0, #ARM_PSCI_STACK_SHIFT
+	sub	x0, x9, x0
+	ret
+ENDPROC(psci_get_cpu_stack_top)
+
+unhandled_exception:
+	b	unhandled_exception	/* simply dead loop */
+
+handle_sync:
+	mov	x15, x30
+	mov	x14, x0
+
+	bl	psci_get_cpu_id
+	bl	psci_get_cpu_stack_top
+	mov	x9, #1
+	msr	spsel, x9
+	mov	sp, x0
+
+	mov	x0, x14
+	mov	x30, x15
+
+	mrs	x9, esr_el3
+	ubfx	x9, x9, #26, #6
+	cmp	x9, #0x13
+	b.eq	handle_smc32
+	cmp	x9, #0x17
+	b.eq	handle_smc64
+
+	b	unhandled_exception
+
+#ifdef CONFIG_ARMV8_EA_EL3_FIRST
+/*
+ * Override this function if custom error handling is
+ * needed for asynchronous aborts
+ */
+ENTRY(plat_error_handler)
+	ret
+ENDPROC(plat_error_handler)
+.weak plat_error_handler
+
+handle_error:
+	bl	psci_get_cpu_id
+	bl	psci_get_cpu_stack_top
+	mov	x9, #1
+	msr	spsel, x9
+	mov	sp, x0
+
+	bl	plat_error_handler	/* Platform specific error handling */
+deadloop:
+	b	deadloop		/* Never return */
+#endif
+
+	.align	11
+	.globl	el3_exception_vectors
+el3_exception_vectors:
+	b	unhandled_exception	/* Sync, Current EL using SP0 */
+	.align	7
+	b	unhandled_exception	/* IRQ, Current EL using SP0 */
+	.align	7
+	b	unhandled_exception	/* FIQ, Current EL using SP0 */
+	.align	7
+	b	unhandled_exception	/* SError, Current EL using SP0 */
+	.align	7
+	b	unhandled_exception	/* Sync, Current EL using SPx */
+	.align	7
+	b	unhandled_exception	/* IRQ, Current EL using SPx */
+	.align	7
+	b	unhandled_exception	/* FIQ, Current EL using SPx */
+	.align	7
+	b	unhandled_exception	/* SError, Current EL using SPx */
+	.align	7
+	b	handle_sync		/* Sync, Lower EL using AArch64 */
+	.align	7
+	b	unhandled_exception	/* IRQ, Lower EL using AArch64 */
+	.align	7
+	b	unhandled_exception	/* FIQ, Lower EL using AArch64 */
+	.align	7
+#ifdef CONFIG_ARMV8_EA_EL3_FIRST
+	b	handle_error		/* SError, Lower EL using AArch64 */
+#else
+	b	unhandled_exception	/* SError, Lower EL using AArch64 */
+#endif
+	.align	7
+	b	unhandled_exception	/* Sync, Lower EL using AArch32 */
+	.align	7
+	b	unhandled_exception	/* IRQ, Lower EL using AArch32 */
+	.align	7
+	b	unhandled_exception	/* FIQ, Lower EL using AArch32 */
+	.align	7
+	b	unhandled_exception	/* SError, Lower EL using AArch32 */
+
+ENTRY(psci_setup_vectors)
+	adr	x0, el3_exception_vectors
+	msr	vbar_el3, x0
+	ret
+ENDPROC(psci_setup_vectors)
+
+ENTRY(psci_arch_init)
+	ret
+ENDPROC(psci_arch_init)
+.weak psci_arch_init
+
+.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv8/sec_firmware.c b/roms/u-boot/arch/arm/cpu/armv8/sec_firmware.c
new file mode 100644
index 000000000..267894fbc
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/sec_firmware.c
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 NXP Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <errno.h>
+#include <fdt_support.h>
+#include <image.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/ptrace.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/types.h>
+#include <asm/macro.h>
+#include <asm/armv8/sec_firmware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+extern void c_runtime_cpu_setup(void);
+
+#define SEC_FIRMWARE_LOADED	0x1
+#define SEC_FIRMWARE_RUNNING	0x2
+#define SEC_FIRMWARE_ADDR_MASK	(~0x3)
+/*
+ * Secure firmware load addr
+ * Flags used: 0x1 secure firmware has been loaded to secure memory
+ *             0x2 secure firmware is running
+ */
+phys_addr_t sec_firmware_addr;
+
+#ifndef SEC_FIRMWARE_FIT_IMAGE
+#define SEC_FIRMWARE_FIT_IMAGE		"firmware"
+#endif
+#ifndef SEC_FIRMWARE_FIT_CNF_NAME
+#define SEC_FIRMWARE_FIT_CNF_NAME	"config-1"
+#endif
+#ifndef SEC_FIRMWARE_TARGET_EL
+#define SEC_FIRMWARE_TARGET_EL		2
+#endif
+
+static int sec_firmware_get_data(const void *sec_firmware_img,
+				const void **data, size_t *size)
+{
+	int conf_node_off, fw_node_off;
+	char *conf_node_name = NULL;
+	char *desc;
+	int ret;
+
+	conf_node_name = SEC_FIRMWARE_FIT_CNF_NAME;
+
+	conf_node_off = fit_conf_get_node(sec_firmware_img, conf_node_name);
+	if (conf_node_off < 0) {
+		printf("SEC Firmware: %s: no such config\n", conf_node_name);
+		return -ENOENT;
+	}
+
+	fw_node_off = fit_conf_get_prop_node(sec_firmware_img, conf_node_off,
+			SEC_FIRMWARE_FIT_IMAGE);
+	if (fw_node_off < 0) {
+		printf("SEC Firmware: No '%s' in config\n",
+		       SEC_FIRMWARE_FIT_IMAGE);
+		return -ENOLINK;
+	}
+
+	/* Verify secure firmware image */
+	if (!(fit_image_verify(sec_firmware_img, fw_node_off))) {
+		printf("SEC Firmware: Bad firmware image (bad CRC)\n");
+		return -EINVAL;
+	}
+
+	if (fit_image_get_data(sec_firmware_img, fw_node_off, data, size)) {
+		printf("SEC Firmware: Can't get %s subimage data/size",
+		       SEC_FIRMWARE_FIT_IMAGE);
+		return -ENOENT;
+	}
+
+	ret = fit_get_desc(sec_firmware_img, fw_node_off, &desc);
+	if (ret)
+		printf("SEC Firmware: Can't get description\n");
+	else
+		printf("%s\n", desc);
+
+	return ret;
+}
+
+/*
+ * SEC Firmware FIT image parser checks if the image is in FIT
+ * format, verifies integrity of the image and calculates raw
+ * image address and size values.
+ *
+ * Returns 0 on success and a negative errno on error task fail.
+ */
+static int sec_firmware_parse_image(const void *sec_firmware_img,
+					const void **raw_image_addr,
+					size_t *raw_image_size)
+{
+	int ret;
+
+	ret = sec_firmware_get_data(sec_firmware_img, raw_image_addr,
+					raw_image_size);
+	if (ret)
+		return ret;
+
+	debug("SEC Firmware: raw_image_addr = 0x%p, raw_image_size = 0x%lx\n",
+	      *raw_image_addr, *raw_image_size);
+
+	return 0;
+}
+
+/*
+ * SEC Firmware FIT image parser to check if any loadable is
+ * present. If present, verify integrity of the loadable and
+ * copy loadable to address provided in (loadable_h, loadable_l).
+ *
+ * Returns 0 on success and a negative errno on error task fail.
+ */
+static int sec_firmware_check_copy_loadable(const void *sec_firmware_img,
+					    u32 *loadable_l, u32 *loadable_h)
+{
+	phys_addr_t sec_firmware_loadable_addr = 0;
+	int conf_node_off, ld_node_off, images;
+	char *conf_node_name = NULL;
+	const void *data;
+	size_t size;
+	ulong load;
+	const char *name, *str, *type;
+	int len;
+
+	conf_node_name = SEC_FIRMWARE_FIT_CNF_NAME;
+
+	conf_node_off = fit_conf_get_node(sec_firmware_img, conf_node_name);
+	if (conf_node_off < 0) {
+		printf("SEC Firmware: %s: no such config\n", conf_node_name);
+		return -ENOENT;
+	}
+
+	/* find the node holding the images information */
+	images = fdt_path_offset(sec_firmware_img, FIT_IMAGES_PATH);
+	if (images < 0) {
+		printf("%s: Cannot find /images node: %d\n", __func__, images);
+		return -1;
+	}
+
+	type = FIT_LOADABLE_PROP;
+
+	name = fdt_getprop(sec_firmware_img, conf_node_off, type, &len);
+	if (!name) {
+		/* Loadables not present */
+		return 0;
+	}
+
+	printf("SEC Firmware: '%s' present in config\n", type);
+
+	for (str = name; str && ((str - name) < len);
+	     str = strchr(str, '\0') + 1) {
+		printf("%s: '%s'\n", type, str);
+		ld_node_off = fdt_subnode_offset(sec_firmware_img, images, str);
+		if (ld_node_off < 0) {
+			printf("cannot find image node '%s': %d\n", str,
+			       ld_node_off);
+			return -EINVAL;
+		}
+
+		/* Verify secure firmware image */
+		if (!(fit_image_verify(sec_firmware_img, ld_node_off))) {
+			printf("SEC Loadable: Bad loadable image (bad CRC)\n");
+			return -EINVAL;
+		}
+
+		if (fit_image_get_data(sec_firmware_img, ld_node_off,
+				       &data, &size)) {
+			printf("SEC Loadable: Can't get subimage data/size");
+			return -ENOENT;
+		}
+
+		/* Get load address, treated as load offset to secure memory */
+		if (fit_image_get_load(sec_firmware_img, ld_node_off, &load)) {
+			printf("SEC Loadable: Can't get subimage load");
+			return -ENOENT;
+		}
+
+		/* Compute load address for loadable in secure memory */
+		sec_firmware_loadable_addr = (sec_firmware_addr -
+						gd->arch.tlb_size) + load;
+
+		/* Copy loadable to secure memory and flush dcache */
+		debug("%s copied to address 0x%p\n",
+		      FIT_LOADABLE_PROP, (void *)sec_firmware_loadable_addr);
+		memcpy((void *)sec_firmware_loadable_addr, data, size);
+		flush_dcache_range(sec_firmware_loadable_addr,
+				   sec_firmware_loadable_addr + size);
+
+		/* Populate loadable address only for Trusted OS */
+		if (!strcmp(str, "trustedOS@1")) {
+			/*
+			 * Populate address ptrs for loadable image with
+			 * loadbale addr
+			 */
+			out_le32(loadable_l, (sec_firmware_loadable_addr &
+					      WORD_MASK));
+			out_le32(loadable_h, (sec_firmware_loadable_addr >>
+					      WORD_SHIFT));
+		}
+	}
+
+	return 0;
+}
+
+static int sec_firmware_copy_image(const char *title,
+			 u64 image_addr, u32 image_size, u64 sec_firmware)
+{
+	debug("%s copied to address 0x%p\n", title, (void *)sec_firmware);
+	memcpy((void *)sec_firmware, (void *)image_addr, image_size);
+	flush_dcache_range(sec_firmware, sec_firmware + image_size);
+
+	return 0;
+}
+
+/*
+ * This function will parse the SEC Firmware image, and then load it
+ * to secure memory. Also load any loadable if present along with SEC
+ * Firmware image.
+ */
+static int sec_firmware_load_image(const void *sec_firmware_img,
+				   u32 *loadable_l, u32 *loadable_h)
+{
+	const void *raw_image_addr;
+	size_t raw_image_size = 0;
+	int ret;
+
+	/*
+	 * The Excetpion Level must be EL3 to load and initialize
+	 * the SEC Firmware.
+	 */
+	if (current_el() != 3) {
+		ret = -EACCES;
+		goto out;
+	}
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	/*
+	 * The SEC Firmware must be stored in secure memory.
+	 * Append SEC Firmware to secure mmu table.
+	 */
+	if (!(gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED)) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	sec_firmware_addr = (gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK) +
+			gd->arch.tlb_size;
+#else
+#error "The CONFIG_SYS_MEM_RESERVE_SECURE must be defined when enabled SEC Firmware support"
+#endif
+
+	/* Align SEC Firmware base address to 4K */
+	sec_firmware_addr = (sec_firmware_addr + 0xfff) & ~0xfff;
+	debug("SEC Firmware: Load address: 0x%llx\n",
+	      sec_firmware_addr & SEC_FIRMWARE_ADDR_MASK);
+
+	ret = sec_firmware_parse_image(sec_firmware_img, &raw_image_addr,
+			&raw_image_size);
+	if (ret)
+		goto out;
+
+	/* TODO:
+	 * Check if the end addr of SEC Firmware has been extend the secure
+	 * memory.
+	 */
+
+	/* Copy the secure firmware to secure memory */
+	ret = sec_firmware_copy_image("SEC Firmware", (u64)raw_image_addr,
+			raw_image_size, sec_firmware_addr &
+			SEC_FIRMWARE_ADDR_MASK);
+	if (ret)
+		goto out;
+
+	/*
+	 * Check if any loadable are present along with firmware image, if
+	 * present load them.
+	 */
+	ret = sec_firmware_check_copy_loadable(sec_firmware_img, loadable_l,
+					       loadable_h);
+	if (ret)
+		goto out;
+
+	sec_firmware_addr |= SEC_FIRMWARE_LOADED;
+	debug("SEC Firmware: Entry point: 0x%llx\n",
+	      sec_firmware_addr & SEC_FIRMWARE_ADDR_MASK);
+
+	return 0;
+
+out:
+	printf("SEC Firmware: error (%d)\n", ret);
+	sec_firmware_addr = 0;
+
+	return ret;
+}
+
+static int sec_firmware_entry(u32 *eret_hold_l, u32 *eret_hold_h)
+{
+	const void *entry = (void *)(sec_firmware_addr &
+				SEC_FIRMWARE_ADDR_MASK);
+
+	return _sec_firmware_entry(entry, eret_hold_l, eret_hold_h);
+}
+
+/* Check the secure firmware FIT image */
+__weak bool sec_firmware_is_valid(const void *sec_firmware_img)
+{
+	if (fdt_check_header(sec_firmware_img)) {
+		printf("SEC Firmware: Bad firmware image (not a FIT image)\n");
+		return false;
+	}
+
+	if (fit_check_format(sec_firmware_img, IMAGE_SIZE_INVAL)) {
+		printf("SEC Firmware: Bad firmware image (bad FIT header)\n");
+		return false;
+	}
+
+	return true;
+}
+
+#ifdef CONFIG_SEC_FIRMWARE_ARMV8_PSCI
+/*
+ * The PSCI_VERSION function is added from PSCI v0.2. When the PSCI
+ * v0.1 received this function, the NOT_SUPPORTED (0xffff_ffff) error
+ * number will be returned according to SMC Calling Conventions. But
+ * when getting the NOT_SUPPORTED error number, we cannot ensure if
+ * the PSCI version is v0.1 or other error occurred. So, PSCI v0.1
+ * won't be supported by this framework.
+ * And if the secure firmware isn't running, return NOT_SUPPORTED.
+ *
+ * The return value on success is PSCI version in format
+ * major[31:16]:minor[15:0].
+ */
+unsigned int sec_firmware_support_psci_version(void)
+{
+	if (current_el() == SEC_FIRMWARE_TARGET_EL)
+		return _sec_firmware_support_psci_version();
+
+	return PSCI_INVALID_VER;
+}
+#endif
+
+/*
+ * Check with sec_firmware if it supports random number generation
+ * via HW RNG
+ *
+ * The return value will be true if it is supported
+ */
+bool sec_firmware_support_hwrng(void)
+{
+#ifdef CONFIG_TFABOOT
+	/* return true as TFA has one job ring reserved */
+	return true;
+#endif
+	if (sec_firmware_addr & SEC_FIRMWARE_RUNNING) {
+		return true;
+	}
+
+	return false;
+}
+
+/*
+ * sec_firmware_get_random - Get a random number from SEC Firmware
+ * @rand:		random number buffer to be filled
+ * @bytes:		Number of bytes of random number to be supported
+ * @eret:		-1 in case of error, 0 for success
+ */
+int sec_firmware_get_random(uint8_t *rand, int bytes)
+{
+	unsigned long long num;
+	struct pt_regs regs;
+	int param1;
+
+	if (!bytes || bytes > 8) {
+		printf("Max Random bytes genration supported is 8\n");
+		return -1;
+	}
+#define SIP_RNG_64 0xC200FF11
+	regs.regs[0] = SIP_RNG_64;
+
+	if (bytes <= 4)
+		param1 = 0;
+	else
+		param1 = 1;
+	regs.regs[1] = param1;
+
+	smc_call(&regs);
+
+	if (regs.regs[0])
+		return -1;
+
+	num = regs.regs[1];
+	memcpy(rand, &num, bytes);
+
+	return 0;
+}
+
+/*
+ * sec_firmware_init - Initialize the SEC Firmware
+ * @sec_firmware_img:	the SEC Firmware image address
+ * @eret_hold_l:	the address to hold exception return address low
+ * @eret_hold_h:	the address to hold exception return address high
+ * @loadable_l:		the address to hold loadable address low
+ * @loadable_h:		the address to hold loadable address high
+ */
+int sec_firmware_init(const void *sec_firmware_img,
+			u32 *eret_hold_l,
+			u32 *eret_hold_h,
+			u32 *loadable_l,
+			u32 *loadable_h)
+{
+	int ret;
+
+	if (!sec_firmware_is_valid(sec_firmware_img))
+		return -EINVAL;
+
+	ret = sec_firmware_load_image(sec_firmware_img, loadable_l,
+				      loadable_h);
+	if (ret) {
+		printf("SEC Firmware: Failed to load image\n");
+		return ret;
+	} else if (sec_firmware_addr & SEC_FIRMWARE_LOADED) {
+		ret = sec_firmware_entry(eret_hold_l, eret_hold_h);
+		if (ret) {
+			printf("SEC Firmware: Failed to initialize\n");
+			return ret;
+		}
+	}
+
+	debug("SEC Firmware: Return from SEC Firmware: current_el = %d\n",
+	      current_el());
+
+	/*
+	 * The PE will be turned into target EL when returned from
+	 * SEC Firmware.
+	 */
+	if (current_el() != SEC_FIRMWARE_TARGET_EL)
+		return -EACCES;
+
+	sec_firmware_addr |= SEC_FIRMWARE_RUNNING;
+
+	/* Set exception table and enable caches if it isn't EL3 */
+	if (current_el() != 3) {
+		c_runtime_cpu_setup();
+		enable_caches();
+	}
+
+	return 0;
+}
+
+/*
+ * fdt_fix_kaslr - Add kalsr-seed node in Device tree
+ * @fdt:		Device tree
+ * @eret:		0 in case of error, 1 for success
+ */
+int fdt_fixup_kaslr(void *fdt)
+{
+	int nodeoffset;
+	int err, ret = 0;
+	u8 rand[8];
+
+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT)
+	/* Check if random seed generation is  supported */
+	if (sec_firmware_support_hwrng() == false) {
+		printf("WARNING: SEC firmware not running, no kaslr-seed\n");
+		return 0;
+	}
+
+	ret = sec_firmware_get_random(rand, 8);
+	if (ret < 0) {
+		printf("WARNING: No random number to set kaslr-seed\n");
+		return 0;
+	}
+
+	err = fdt_check_header(fdt);
+	if (err < 0) {
+		printf("fdt_chosen: %s\n", fdt_strerror(err));
+		return 0;
+	}
+
+	/* find or create "/chosen" node. */
+	nodeoffset = fdt_find_or_add_subnode(fdt, 0, "chosen");
+	if (nodeoffset < 0)
+		return 0;
+
+	err = fdt_setprop(fdt, nodeoffset, "kaslr-seed", rand,
+				  sizeof(rand));
+	if (err < 0) {
+		printf("WARNING: can't set kaslr-seed %s.\n",
+		       fdt_strerror(err));
+		return 0;
+	}
+	ret = 1;
+#endif
+
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/sec_firmware_asm.S b/roms/u-boot/arch/arm/cpu/armv8/sec_firmware_asm.S
new file mode 100644
index 000000000..af1b2da07
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/sec_firmware_asm.S
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 NXP Semiconductor, Inc.
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/system.h>
+#include <asm/macro.h>
+
+WEAK(_sec_firmware_entry)
+	/*
+	 * x0: Secure Firmware entry point
+	 * x1: Exception return address Low
+	 * x2: Exception return address High
+	 */
+
+	/* Save stack pointer for EL2 */
+	mov	x3, sp
+	msr	sp_el2, x3
+
+	/* Set exception return address hold pointer */
+        adr	x4, 1f
+        mov	x3, x4
+#ifdef CONFIG_ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT
+        rev	w3, w3
+#endif
+        str	w3, [x1]
+        lsr	x3, x4, #32
+#ifdef CONFIG_ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT
+        rev	w3, w3
+#endif
+        str	w3, [x2]
+
+	/* Call SEC monitor */
+        br	x0
+
+1:
+        mov	x0, #0
+        ret
+ENDPROC(_sec_firmware_entry)
+
+#ifdef CONFIG_SEC_FIRMWARE_ARMV8_PSCI
+ENTRY(_sec_firmware_support_psci_version)
+	mov	x0, 0x84000000
+	mov	x1, 0x0
+	mov	x2, 0x0
+	mov	x3, 0x0
+	smc	#0
+	ret
+ENDPROC(_sec_firmware_support_psci_version)
+
+/*
+ * Switch from AArch64 EL2 to AArch32 EL2
+ * @param inputs:
+ * x0: argument, zero
+ * x1: machine nr
+ * x2: fdt address
+ * x3: input argument
+ * x4: kernel entry point
+ * @param outputs for secure firmware:
+ * x0: function id
+ * x1: kernel entry point
+ * x2: machine nr
+ * x3: fdt address
+*/
+ENTRY(armv8_el2_to_aarch32)
+	mov	x3, x2
+	mov	x2, x1
+	mov	x1, x4
+	ldr	x0, =0xc200ff17
+	smc	#0
+	ret
+ENDPROC(armv8_el2_to_aarch32)
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/armv8/smccc-call.S b/roms/u-boot/arch/arm/cpu/armv8/smccc-call.S
new file mode 100644
index 000000000..dc92b2877
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/smccc-call.S
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015, Linaro Limited
+ */
+#include <linux/linkage.h>
+#include <linux/arm-smccc.h>
+#include <generated/asm-offsets.h>
+
+#ifdef CONFIG_EFI_LOADER
+	.section	.text.efi_runtime
+#endif
+
+	.macro SMCCC instr
+	.cfi_startproc
+	\instr	#0
+	ldr	x4, [sp]
+	stp	x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
+	stp	x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
+	ldr	x4, [sp, #8]
+	cbz	x4, 1f /* no quirk structure */
+	ldr	x9, [x4, #ARM_SMCCC_QUIRK_ID_OFFS]
+	cmp	x9, #ARM_SMCCC_QUIRK_QCOM_A6
+	b.ne	1f
+	str	x6, [x4, ARM_SMCCC_QUIRK_STATE_OFFS]
+1:	ret
+	.cfi_endproc
+	.endm
+
+/*
+ * void arm_smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
+ */
+ENTRY(__arm_smccc_smc)
+	SMCCC	smc
+ENDPROC(__arm_smccc_smc)
+
+/*
+ * void arm_smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
+ */
+ENTRY(__arm_smccc_hvc)
+	SMCCC	hvc
+ENDPROC(__arm_smccc_hvc)
diff --git a/roms/u-boot/arch/arm/cpu/armv8/spin_table.c b/roms/u-boot/arch/arm/cpu/armv8/spin_table.c
new file mode 100644
index 000000000..42a0962fd
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/spin_table.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <common.h>
+#include <linux/libfdt.h>
+#include <asm/spin_table.h>
+
+int spin_table_update_dt(void *fdt)
+{
+	int cpus_offset, offset;
+	const char *prop;
+	int ret;
+	unsigned long rsv_addr = (unsigned long)&spin_table_reserve_begin;
+	unsigned long rsv_size = &spin_table_reserve_end -
+						&spin_table_reserve_begin;
+
+	cpus_offset = fdt_path_offset(fdt, "/cpus");
+	if (cpus_offset < 0)
+		return -ENODEV;
+
+	for (offset = fdt_first_subnode(fdt, cpus_offset);
+	     offset >= 0;
+	     offset = fdt_next_subnode(fdt, offset)) {
+		prop = fdt_getprop(fdt, offset, "device_type", NULL);
+		if (!prop || strcmp(prop, "cpu"))
+			continue;
+
+		/*
+		 * In the first loop, we check if every CPU node specifies
+		 * spin-table.  Otherwise, just return successfully to not
+		 * disturb other methods, like psci.
+		 */
+		prop = fdt_getprop(fdt, offset, "enable-method", NULL);
+		if (!prop || strcmp(prop, "spin-table"))
+			return 0;
+	}
+
+	for (offset = fdt_first_subnode(fdt, cpus_offset);
+	     offset >= 0;
+	     offset = fdt_next_subnode(fdt, offset)) {
+		prop = fdt_getprop(fdt, offset, "device_type", NULL);
+		if (!prop || strcmp(prop, "cpu"))
+			continue;
+
+		ret = fdt_setprop_u64(fdt, offset, "cpu-release-addr",
+				(unsigned long)&spin_table_cpu_release_addr);
+		if (ret)
+			return -ENOSPC;
+	}
+
+	ret = fdt_add_mem_rsv(fdt, rsv_addr, rsv_size);
+	if (ret)
+		return -ENOSPC;
+
+	printf("   Reserved memory region for spin-table: addr=%lx size=%lx\n",
+	       rsv_addr, rsv_size);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/spin_table_v8.S b/roms/u-boot/arch/arm/cpu/armv8/spin_table_v8.S
new file mode 100644
index 000000000..6d2684327
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/spin_table_v8.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(spin_table_secondary_jump)
+.globl spin_table_reserve_begin
+spin_table_reserve_begin:
+0:	wfe
+	ldr	x0, spin_table_cpu_release_addr
+	cbz	x0, 0b
+	br	x0
+.globl spin_table_cpu_release_addr
+	.align	3
+spin_table_cpu_release_addr:
+	.quad	0
+.globl spin_table_reserve_end
+spin_table_reserve_end:
+ENDPROC(spin_table_secondary_jump)
diff --git a/roms/u-boot/arch/arm/cpu/armv8/spl_data.c b/roms/u-boot/arch/arm/cpu/armv8/spl_data.c
new file mode 100644
index 000000000..8f1231c86
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/spl_data.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+#include <common.h>
+#include <spl.h>
+
+char __data_save_start[0] __section(".__data_save_start");
+char __data_save_end[0] __section(".__data_save_end");
+
+u32 cold_reboot_flag = 1;
+
+void spl_save_restore_data(void)
+{
+	u32 data_size = __data_save_end - __data_save_start;
+
+	if (cold_reboot_flag == 1) {
+		/* Save data section to data_save section */
+		memcpy(__data_save_start, __data_save_start - data_size,
+		       data_size);
+	} else {
+		/* Restore the data_save section to data section */
+		memcpy(__data_save_start - data_size, __data_save_start,
+		       data_size);
+	}
+
+	cold_reboot_flag++;
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/start.S b/roms/u-boot/arch/arm/cpu/armv8/start.S
new file mode 100644
index 000000000..662449156
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/start.S
@@ -0,0 +1,402 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/armv8/mmu.h>
+
+/*************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ *************************************************************************/
+
+.globl	_start
+_start:
+#if defined(CONFIG_LINUX_KERNEL_IMAGE_HEADER)
+#include <asm/boot0-linux-kernel-header.h>
+#elif defined(CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK)
+/*
+ * Various SoCs need something special and SoC-specific up front in
+ * order to boot, allow them to set that in their boot0.h file and then
+ * use it here.
+ */
+#include <asm/arch/boot0.h>
+#else
+	b	reset
+#endif
+
+	.align 3
+
+.globl	_TEXT_BASE
+_TEXT_BASE:
+	.quad	CONFIG_SYS_TEXT_BASE
+
+/*
+ * These are defined in the linker script.
+ */
+.globl	_end_ofs
+_end_ofs:
+	.quad	_end - _start
+
+.globl	_bss_start_ofs
+_bss_start_ofs:
+	.quad	__bss_start - _start
+
+.globl	_bss_end_ofs
+_bss_end_ofs:
+	.quad	__bss_end - _start
+
+reset:
+	/* Allow the board to save important registers */
+	b	save_boot_params
+.globl	save_boot_params_ret
+save_boot_params_ret:
+
+#if CONFIG_POSITION_INDEPENDENT
+	/* Verify that we're 4K aligned.  */
+	adr	x0, _start
+	ands	x0, x0, #0xfff
+	b.eq	1f
+0:
+	/*
+	 * FATAL, can't continue.
+	 * U-Boot needs to be loaded at a 4K aligned address.
+	 *
+	 * We use ADRP and ADD to load some symbol addresses during startup.
+	 * The ADD uses an absolute (non pc-relative) lo12 relocation
+	 * thus requiring 4K alignment.
+	 */
+	wfi
+	b	0b
+1:
+
+	/*
+	 * Fix .rela.dyn relocations. This allows U-Boot to be loaded to and
+	 * executed at a different address than it was linked at.
+	 */
+pie_fixup:
+	adr	x0, _start		/* x0 <- Runtime value of _start */
+	ldr	x1, _TEXT_BASE		/* x1 <- Linked value of _start */
+	subs	x9, x0, x1		/* x9 <- Run-vs-link offset */
+	beq	pie_fixup_done
+	adrp    x2, __rel_dyn_start     /* x2 <- Runtime &__rel_dyn_start */
+	add     x2, x2, #:lo12:__rel_dyn_start
+	adrp    x3, __rel_dyn_end       /* x3 <- Runtime &__rel_dyn_end */
+	add     x3, x3, #:lo12:__rel_dyn_end
+pie_fix_loop:
+	ldp	x0, x1, [x2], #16	/* (x0, x1) <- (Link location, fixup) */
+	ldr	x4, [x2], #8		/* x4 <- addend */
+	cmp	w1, #1027		/* relative fixup? */
+	bne	pie_skip_reloc
+	/* relative fix: store addend plus offset at dest location */
+	add	x0, x0, x9
+	add	x4, x4, x9
+	str	x4, [x0]
+pie_skip_reloc:
+	cmp	x2, x3
+	b.lo	pie_fix_loop
+pie_fixup_done:
+#endif
+
+#ifdef CONFIG_SYS_RESET_SCTRL
+	bl reset_sctrl
+#endif
+
+#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD)
+.macro	set_vbar, regname, reg
+	msr	\regname, \reg
+.endm
+	adr	x0, vectors
+#else
+.macro	set_vbar, regname, reg
+.endm
+#endif
+	/*
+	 * Could be EL3/EL2/EL1, Initial State:
+	 * Little Endian, MMU Disabled, i/dCache Disabled
+	 */
+	switch_el x1, 3f, 2f, 1f
+3:	set_vbar vbar_el3, x0
+	mrs	x0, scr_el3
+	orr	x0, x0, #0xf			/* SCR_EL3.NS|IRQ|FIQ|EA */
+	msr	scr_el3, x0
+	msr	cptr_el3, xzr			/* Enable FP/SIMD */
+#ifdef COUNTER_FREQUENCY
+	ldr	x0, =COUNTER_FREQUENCY
+	msr	cntfrq_el0, x0			/* Initialize CNTFRQ */
+#endif
+	b	0f
+2:	set_vbar	vbar_el2, x0
+	mov	x0, #0x33ff
+	msr	cptr_el2, x0			/* Enable FP/SIMD */
+	b	0f
+1:	set_vbar	vbar_el1, x0
+	mov	x0, #3 << 20
+	msr	cpacr_el1, x0			/* Enable FP/SIMD */
+0:
+	isb
+
+	/*
+	 * Enable SMPEN bit for coherency.
+	 * This register is not architectural but at the moment
+	 * this bit should be set for A53/A57/A72.
+	 */
+#ifdef CONFIG_ARMV8_SET_SMPEN
+	switch_el x1, 3f, 1f, 1f
+3:
+	mrs     x0, S3_1_c15_c2_1               /* cpuectlr_el1 */
+	orr     x0, x0, #0x40
+	msr     S3_1_c15_c2_1, x0
+	isb
+1:
+#endif
+
+	/* Apply ARM core specific erratas */
+	bl	apply_core_errata
+
+	/*
+	 * Cache/BPB/TLB Invalidate
+	 * i-cache is invalidated before enabled in icache_enable()
+	 * tlb is invalidated before mmu is enabled in dcache_enable()
+	 * d-cache is invalidated before enabled in dcache_enable()
+	 */
+
+	/* Processor specific initialization */
+	bl	lowlevel_init
+
+#if defined(CONFIG_ARMV8_SPIN_TABLE) && !defined(CONFIG_SPL_BUILD)
+	branch_if_master x0, x1, master_cpu
+	b	spin_table_secondary_jump
+	/* never return */
+#elif defined(CONFIG_ARMV8_MULTIENTRY)
+	branch_if_master x0, x1, master_cpu
+
+	/*
+	 * Slave CPUs
+	 */
+slave_cpu:
+	wfe
+	ldr	x1, =CPU_RELEASE_ADDR
+	ldr	x0, [x1]
+	cbz	x0, slave_cpu
+	br	x0			/* branch to the given address */
+#endif /* CONFIG_ARMV8_MULTIENTRY */
+master_cpu:
+	bl	_main
+
+#ifdef CONFIG_SYS_RESET_SCTRL
+reset_sctrl:
+	switch_el x1, 3f, 2f, 1f
+3:
+	mrs	x0, sctlr_el3
+	b	0f
+2:
+	mrs	x0, sctlr_el2
+	b	0f
+1:
+	mrs	x0, sctlr_el1
+
+0:
+	ldr	x1, =0xfdfffffa
+	and	x0, x0, x1
+
+	switch_el x1, 6f, 5f, 4f
+6:
+	msr	sctlr_el3, x0
+	b	7f
+5:
+	msr	sctlr_el2, x0
+	b	7f
+4:
+	msr	sctlr_el1, x0
+
+7:
+	dsb	sy
+	isb
+	b	__asm_invalidate_tlb_all
+	ret
+#endif
+
+/*-----------------------------------------------------------------------*/
+
+WEAK(apply_core_errata)
+
+	mov	x29, lr			/* Save LR */
+	/* For now, we support Cortex-A53, Cortex-A57 specific errata */
+
+	/* Check if we are running on a Cortex-A53 core */
+	branch_if_a53_core x0, apply_a53_core_errata
+
+	/* Check if we are running on a Cortex-A57 core */
+	branch_if_a57_core x0, apply_a57_core_errata
+0:
+	mov	lr, x29			/* Restore LR */
+	ret
+
+apply_a53_core_errata:
+
+#ifdef CONFIG_ARM_ERRATA_855873
+	mrs	x0, midr_el1
+	tst	x0, #(0xf << 20)
+	b.ne	0b
+
+	mrs	x0, midr_el1
+	and	x0, x0, #0xf
+	cmp	x0, #3
+	b.lt	0b
+
+	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
+	/* Enable data cache clean as data cache clean/invalidate */
+	orr	x0, x0, #1 << 44
+	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
+	isb
+#endif
+	b 0b
+
+apply_a57_core_errata:
+
+#ifdef CONFIG_ARM_ERRATA_828024
+	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
+	/* Disable non-allocate hint of w-b-n-a memory type */
+	orr	x0, x0, #1 << 49
+	/* Disable write streaming no L1-allocate threshold */
+	orr	x0, x0, #3 << 25
+	/* Disable write streaming no-allocate threshold */
+	orr	x0, x0, #3 << 27
+	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
+	isb
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_826974
+	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
+	/* Disable speculative load execution ahead of a DMB */
+	orr	x0, x0, #1 << 59
+	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
+	isb
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_833471
+	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
+	/* FPSCR write flush.
+	 * Note that in some cases where a flush is unnecessary this
+	    could impact performance. */
+	orr	x0, x0, #1 << 38
+	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
+	isb
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_829520
+	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
+	/* Disable Indirect Predictor bit will prevent this erratum
+	    from occurring
+	 * Note that in some cases where a flush is unnecessary this
+	    could impact performance. */
+	orr	x0, x0, #1 << 4
+	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
+	isb
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_833069
+	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
+	/* Disable Enable Invalidates of BTB bit */
+	and	x0, x0, #0xE
+	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
+	isb
+#endif
+	b 0b
+ENDPROC(apply_core_errata)
+
+/*-----------------------------------------------------------------------*/
+
+WEAK(lowlevel_init)
+	mov	x29, lr			/* Save LR */
+
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	branch_if_slave x0, 1f
+	ldr	x0, =GICD_BASE
+	bl	gic_init_secure
+1:
+#if defined(CONFIG_GICV3)
+	ldr	x0, =GICR_BASE
+	bl	gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+	ldr	x0, =GICD_BASE
+	ldr	x1, =GICC_BASE
+	bl	gic_init_secure_percpu
+#endif
+#endif
+
+#ifdef CONFIG_ARMV8_MULTIENTRY
+	branch_if_master x0, x1, 2f
+
+	/*
+	 * Slave should wait for master clearing spin table.
+	 * This sync prevent salves observing incorrect
+	 * value of spin table and jumping to wrong place.
+	 */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_GICV2
+	ldr	x0, =GICC_BASE
+#endif
+	bl	gic_wait_for_interrupt
+#endif
+
+	/*
+	 * All slaves will enter EL2 and optionally EL1.
+	 */
+	adr	x4, lowlevel_in_el2
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el2
+
+lowlevel_in_el2:
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x4, lowlevel_in_el1
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el1
+
+lowlevel_in_el1:
+#endif
+
+#endif /* CONFIG_ARMV8_MULTIENTRY */
+
+2:
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(lowlevel_init)
+
+WEAK(smp_kick_all_cpus)
+	/* Kick secondary cpus up by SGI 0 interrupt */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	ldr	x0, =GICD_BASE
+	b	gic_kick_secondary_cpus
+#endif
+	ret
+ENDPROC(smp_kick_all_cpus)
+
+/*-----------------------------------------------------------------------*/
+
+ENTRY(c_runtime_cpu_setup)
+#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD)
+	/* Relocate vBAR */
+	adr	x0, vectors
+	switch_el x1, 3f, 2f, 1f
+3:	msr	vbar_el3, x0
+	b	0f
+2:	msr	vbar_el2, x0
+	b	0f
+1:	msr	vbar_el1, x0
+0:
+#endif
+
+	ret
+ENDPROC(c_runtime_cpu_setup)
+
+WEAK(save_boot_params)
+	b	save_boot_params_ret	/* back to my caller */
+ENDPROC(save_boot_params)
diff --git a/roms/u-boot/arch/arm/cpu/armv8/tlb.S b/roms/u-boot/arch/arm/cpu/armv8/tlb.S
new file mode 100644
index 000000000..46a0d7d8f
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/tlb.S
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+/*
+ * void __asm_invalidate_tlb_all(void)
+ *
+ * invalidate all tlb entries.
+*/
+.pushsection .text.__asm_invalidate_tlb_all, "ax"
+ENTRY(__asm_invalidate_tlb_all)
+	switch_el x9, 3f, 2f, 1f
+3:	tlbi	alle3
+	dsb	sy
+	isb
+	b	0f
+2:	tlbi	alle2
+	dsb	sy
+	isb
+	b	0f
+1:	tlbi	vmalle1
+	dsb	sy
+	isb
+0:
+	ret
+ENDPROC(__asm_invalidate_tlb_all)
+.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv8/transition.S b/roms/u-boot/arch/arm/cpu/armv8/transition.S
new file mode 100644
index 000000000..a31af4ffc
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/transition.S
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+.pushsection .text.armv8_switch_to_el2, "ax"
+ENTRY(armv8_switch_to_el2)
+	switch_el x6, 1f, 0f, 0f
+0:
+	cmp x5, #ES_TO_AARCH64
+	b.eq 2f
+	/*
+	 * When loading 32-bit kernel, it will jump
+	 * to secure firmware again, and never return.
+	 */
+	bl armv8_el2_to_aarch32
+2:
+	/*
+	 * x4 is kernel entry point or switch_to_el1
+	 * if CONFIG_ARMV8_SWITCH_TO_EL1 is defined.
+         * When running in EL2 now, jump to the
+	 * address saved in x4.
+	 */
+	br x4
+1:	armv8_switch_to_el2_m x4, x5, x6
+ENDPROC(armv8_switch_to_el2)
+.popsection
+
+.pushsection .text.armv8_switch_to_el1, "ax"
+ENTRY(armv8_switch_to_el1)
+	switch_el x6, 0f, 1f, 0f
+0:
+	/* x4 is kernel entry point. When running in EL1
+	 * now, jump to the address saved in x4.
+	 */
+	br x4
+1:	armv8_switch_to_el1_m x4, x5, x6
+ENDPROC(armv8_switch_to_el1)
+.popsection
+
+.pushsection .text.armv8_el2_to_aarch32, "ax"
+WEAK(armv8_el2_to_aarch32)
+	ret
+ENDPROC(armv8_el2_to_aarch32)
+.popsection
diff --git a/roms/u-boot/arch/arm/cpu/armv8/u-boot-spl.lds b/roms/u-boot/arch/arm/cpu/armv8/u-boot-spl.lds
new file mode 100644
index 000000000..9edb662b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/u-boot-spl.lds
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ */
+
+MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,
+		LENGTH = IMAGE_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+	.text : {
+		. = ALIGN(8);
+		*(.__image_copy_start)
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	} >.sram
+
+	.rodata : {
+		. = ALIGN(8);
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	} >.sram
+
+	.data : {
+		. = ALIGN(8);
+		*(.data*)
+	} >.sram
+
+#ifdef CONFIG_SPL_RECOVER_DATA_SECTION
+	.data_save : {
+		*(.__data_save_start)
+		. = SIZEOF(.data);
+		*(.__data_save_end)
+	} >.sram
+#endif
+
+	.u_boot_list : {
+		. = ALIGN(8);
+		KEEP(*(SORT(.u_boot_list*)));
+	} >.sram
+
+	.image_copy_end : {
+		. = ALIGN(8);
+		*(.__image_copy_end)
+	} >.sram
+
+	.end : {
+		. = ALIGN(8);
+		*(.__end)
+	} >.sram
+
+	_image_binary_end = .;
+
+	.bss_start (NOLOAD) : {
+		. = ALIGN(8);
+		KEEP(*(.__bss_start));
+	} >.sdram
+
+	.bss (NOLOAD) : {
+		*(.bss*)
+		 . = ALIGN(8);
+	} >.sdram
+
+	.bss_end (NOLOAD) : {
+		KEEP(*(.__bss_end));
+	} >.sdram
+
+	/DISCARD/ : { *(.rela*) }
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/u-boot.lds b/roms/u-boot/arch/arm/cpu/armv8/u-boot.lds
new file mode 100644
index 000000000..255498059
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/u-boot.lds
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+#include <config.h>
+#include <asm/psci.h>
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+#ifdef CONFIG_ARMV8_SECURE_BASE
+	/DISCARD/ : { *(.rela._secure*) }
+#endif
+	. = 0x00000000;
+
+	. = ALIGN(8);
+	.text :
+	{
+		*(.__image_copy_start)
+		CPUDIR/start.o (.text*)
+	}
+
+	/* This needs to come before *(.text*) */
+	.efi_runtime : {
+                __efi_runtime_start = .;
+		*(.text.efi_runtime*)
+		*(.rodata.efi_runtime*)
+		*(.data.efi_runtime*)
+                __efi_runtime_stop = .;
+	}
+
+	.text_rest :
+	{
+		*(.text*)
+	}
+
+#ifdef CONFIG_ARMV8_PSCI
+	.__secure_start :
+#ifndef CONFIG_ARMV8_SECURE_BASE
+		ALIGN(CONSTANT(COMMONPAGESIZE))
+#endif
+	{
+		KEEP(*(.__secure_start))
+	}
+
+#ifndef CONFIG_ARMV8_SECURE_BASE
+#define CONFIG_ARMV8_SECURE_BASE
+#define __ARMV8_PSCI_STACK_IN_RAM
+#endif
+	.secure_text CONFIG_ARMV8_SECURE_BASE :
+		AT(ADDR(.__secure_start) + SIZEOF(.__secure_start))
+	{
+		*(._secure.text)
+		. = ALIGN(8);
+		__secure_svc_tbl_start = .;
+		KEEP(*(._secure_svc_tbl_entries))
+		__secure_svc_tbl_end = .;
+	}
+
+	.secure_data : AT(LOADADDR(.secure_text) + SIZEOF(.secure_text))
+	{
+		*(._secure.data)
+	}
+
+	.secure_stack ALIGN(ADDR(.secure_data) + SIZEOF(.secure_data),
+			    CONSTANT(COMMONPAGESIZE)) (NOLOAD) :
+#ifdef __ARMV8_PSCI_STACK_IN_RAM
+		AT(ADDR(.secure_stack))
+#else
+		AT(LOADADDR(.secure_data) + SIZEOF(.secure_data))
+#endif
+	{
+		KEEP(*(.__secure_stack_start))
+
+		. = . + CONFIG_ARMV8_PSCI_NR_CPUS * ARM_PSCI_STACK_SIZE;
+
+		. = ALIGN(CONSTANT(COMMONPAGESIZE));
+
+		KEEP(*(.__secure_stack_end))
+	}
+
+#ifndef __ARMV8_PSCI_STACK_IN_RAM
+	. = LOADADDR(.secure_stack);
+#endif
+
+	.__secure_end : AT(ADDR(.__secure_end)) {
+		KEEP(*(.__secure_end))
+		LONG(0x1d1071c);	/* Must output something to reset LMA */
+	}
+#endif
+
+	. = ALIGN(8);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(8);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(8);
+
+	. = .;
+
+	. = ALIGN(8);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(8);
+
+	.efi_runtime_rel : {
+                __efi_runtime_rel_start = .;
+		*(.rel*.efi_runtime)
+		*(.rel*.efi_runtime.*)
+                __efi_runtime_rel_stop = .;
+	}
+
+	. = ALIGN(8);
+
+	.image_copy_end :
+	{
+		*(.__image_copy_end)
+	}
+
+	. = ALIGN(8);
+
+	.rel_dyn_start :
+	{
+		*(.__rel_dyn_start)
+	}
+
+	.rela.dyn : {
+		*(.rela*)
+	}
+
+	.rel_dyn_end :
+	{
+		*(.__rel_dyn_end)
+	}
+
+	_end = .;
+
+	. = ALIGN(8);
+
+	.bss_start : {
+		KEEP(*(.__bss_start));
+	}
+
+	.bss : {
+		*(.bss*)
+		 . = ALIGN(8);
+	}
+
+	.bss_end : {
+		KEEP(*(.__bss_end));
+	}
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+
+#ifdef CONFIG_LINUX_KERNEL_IMAGE_HEADER
+#include "linux-kernel-image-header-vars.h"
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/armv8/xen/Makefile b/roms/u-boot/arch/arm/cpu/armv8/xen/Makefile
new file mode 100644
index 000000000..e3b4ae2bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/xen/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) 2018 NXP
+# (C) 2020 EPAM Systems Inc.
+
+obj-y += lowlevel_init.o hypercall.o
diff --git a/roms/u-boot/arch/arm/cpu/armv8/xen/hypercall.S b/roms/u-boot/arch/arm/cpu/armv8/xen/hypercall.S
new file mode 100644
index 000000000..731256b34
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/xen/hypercall.S
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * hypercall.S
+ *
+ * Xen hypercall wrappers
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+/*
+ * The Xen hypercall calling convention is very similar to the procedure
+ * call standard for the ARM 64-bit architecture: the first parameter is
+ * passed in x0, the second in x1, the third in x2, the fourth in x3 and
+ * the fifth in x4.
+ *
+ * The hypercall number is passed in x16.
+ *
+ * The return value is in x0.
+ *
+ * The hvc ISS is required to be 0xEA1, that is the Xen specific ARM
+ * hypercall tag.
+ *
+ * Parameter structs passed to hypercalls are laid out according to
+ * the ARM 64-bit EABI standard.
+ */
+
+#include <xen/interface/xen.h>
+
+#define XEN_HYPERCALL_TAG	0xEA1
+
+#define HYPERCALL_SIMPLE(hypercall)		\
+.globl HYPERVISOR_##hypercall;                  \
+.align 4,0x90;                                  \
+HYPERVISOR_##hypercall:				\
+	mov x16, #__HYPERVISOR_##hypercall;	\
+	hvc XEN_HYPERCALL_TAG;			\
+	ret;					\
+
+#define HYPERCALL0 HYPERCALL_SIMPLE
+#define HYPERCALL1 HYPERCALL_SIMPLE
+#define HYPERCALL2 HYPERCALL_SIMPLE
+#define HYPERCALL3 HYPERCALL_SIMPLE
+#define HYPERCALL4 HYPERCALL_SIMPLE
+#define HYPERCALL5 HYPERCALL_SIMPLE
+
+                .text
+
+HYPERCALL2(xen_version);
+HYPERCALL3(console_io);
+HYPERCALL3(grant_table_op);
+HYPERCALL2(sched_op);
+HYPERCALL2(event_channel_op);
+HYPERCALL2(hvm_op);
+HYPERCALL2(memory_op);
+
diff --git a/roms/u-boot/arch/arm/cpu/armv8/xen/lowlevel_init.S b/roms/u-boot/arch/arm/cpu/armv8/xen/lowlevel_init.S
new file mode 100644
index 000000000..760e32ed7
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/armv8/xen/lowlevel_init.S
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) 2017 NXP
+ * (C) 2020 EPAM Systems Inc.
+ */
+
+#include <config.h>
+
+.align 8
+.global rom_pointer
+rom_pointer:
+	.space 32
+
+/*
+ * Routine: save_boot_params (called after reset from start.S)
+ */
+
+.global save_boot_params
+save_boot_params:
+	/* The firmware provided ATAG/FDT address can be found in r2/x0 */
+	adr	x1, rom_pointer
+	stp	x0, x2, [x1], #16
+	stp	x3, x4, [x1], #16
+
+	/* Returns */
+	b	save_boot_params_ret
+
+.global restore_boot_params
+restore_boot_params:
+	adr	x1, rom_pointer
+	ldp	x0, x2, [x1], #16
+	ldp	x3, x4, [x1], #16
+	ret
diff --git a/roms/u-boot/arch/arm/cpu/pxa/Makefile b/roms/u-boot/arch/arm/cpu/pxa/Makefile
new file mode 100644
index 000000000..263d9ddb4
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	= start.o
+
+obj-$(CONFIG_CPU_PXA25X)	+= pxa2xx.o
+obj-$(CONFIG_CPU_PXA27X)	+= pxa2xx.o
+
+obj-y	+= cpuinfo.o
+obj-y	+= timer.o
+obj-y	+= usb.o
+obj-y	+= relocate.o
+obj-y	+= cache.o
diff --git a/roms/u-boot/arch/arm/cpu/pxa/cache.c b/roms/u-boot/arch/arm/cpu/pxa/cache.c
new file mode 100644
index 000000000..a2ec5e28c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/cache.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Vasily Khoruzhick <anarsoul@gmail.com>
+ */
+
+#include <cpu_func.h>
+#include <asm/cache.h>
+#include <linux/types.h>
+#include <common.h>
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void invalidate_dcache_all(void)
+{
+	/* Flush/Invalidate I cache */
+	asm volatile("mcr p15, 0, %0, c7, c5, 0\n" : : "r"(0));
+	/* Flush/Invalidate D cache */
+	asm volatile("mcr p15, 0, %0, c7, c6, 0\n" : : "r"(0));
+}
+
+void flush_dcache_all(void)
+{
+	return invalidate_dcache_all();
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+	start &= ~(CONFIG_SYS_CACHELINE_SIZE - 1);
+	stop &= ~(CONFIG_SYS_CACHELINE_SIZE - 1);
+
+	while (start <= stop) {
+		asm volatile("mcr p15, 0, %0, c7, c6, 1\n" : : "r"(start));
+		start += CONFIG_SYS_CACHELINE_SIZE;
+	}
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	return invalidate_dcache_range(start, stop);
+}
+#else /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+#endif /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
+
+/*
+ * Stub implementations for l2 cache operations
+ */
+
+__weak void l2_cache_disable(void) {}
+
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+__weak void invalidate_l2_cache(void) {}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/pxa/config.mk b/roms/u-boot/arch/arm/cpu/pxa/config.mk
new file mode 100644
index 000000000..e7b183674
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/config.mk
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2002
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+
+#
+# !WARNING!
+# The PXA's OneNAND SPL uses .text.0 and .text.1 segments to allow booting from
+# really small OneNAND memories where the mmap'd window is only 1KiB big. The
+# .text.0 contains only the bare minimum needed to load the real SPL into SRAM.
+# Add .text.0 and .text.1 into OBJFLAGS, so when the SPL is being objcopy'd,
+# they are not discarded.
+#
+
+#ifdef CONFIG_SPL_BUILD
+OBJCOPYFLAGS += -j .text.0 -j .text.1
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/pxa/cpuinfo.c b/roms/u-boot/arch/arm/cpu/pxa/cpuinfo.c
new file mode 100644
index 000000000..0d9542f99
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/cpuinfo.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PXA CPU information display
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <linux/compiler.h>
+
+#ifdef CONFIG_CPU_PXA25X
+#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800)
+#error "Init SP address must be set to 0xfffff800 for PXA250"
+#endif
+#endif
+
+#define	CPU_MASK_PXA_PRODID	0x000003f0
+#define	CPU_MASK_PXA_REVID	0x0000000f
+
+#define	CPU_MASK_PRODREV	(CPU_MASK_PXA_PRODID | CPU_MASK_PXA_REVID)
+
+#define	CPU_VALUE_PXA25X	0x100
+#define	CPU_VALUE_PXA27X	0x110
+
+static uint32_t pxa_get_cpuid(void)
+{
+	uint32_t cpuid;
+	asm volatile("mrc p15, 0, %0, c0, c0, 0" : "=r"(cpuid));
+	return cpuid;
+}
+
+int cpu_is_pxa25x(void)
+{
+	uint32_t id = pxa_get_cpuid();
+	id &= CPU_MASK_PXA_PRODID;
+	return id == CPU_VALUE_PXA25X;
+}
+
+int cpu_is_pxa27x(void)
+{
+	uint32_t id = pxa_get_cpuid();
+	id &= CPU_MASK_PXA_PRODID;
+	return id == CPU_VALUE_PXA27X;
+}
+
+int cpu_is_pxa27xm(void)
+{
+	uint32_t id = pxa_get_cpuid();
+	return ((id & CPU_MASK_PXA_PRODID) == CPU_VALUE_PXA27X) &&
+			((id & CPU_MASK_PXA_REVID) == 8);
+}
+
+uint32_t pxa_get_cpu_revision(void)
+{
+	return pxa_get_cpuid() & CPU_MASK_PRODREV;
+}
+
+#ifdef	CONFIG_DISPLAY_CPUINFO
+static const char *pxa25x_get_revision(void)
+{
+	static __maybe_unused const char * const revs_25x[] = { "A0" };
+	static __maybe_unused const char * const revs_26x[] = {
+								"A0", "B0", "B1"
+								};
+	static const char *unknown = "Unknown";
+	uint32_t id;
+
+	if (!cpu_is_pxa25x())
+		return unknown;
+
+	id = pxa_get_cpuid() & CPU_MASK_PXA_REVID;
+
+/* PXA26x is a sick special case as it can't be told apart from PXA25x :-( */
+#ifdef	CONFIG_CPU_PXA26X
+	switch (id) {
+	case 3: return revs_26x[0];
+	case 5: return revs_26x[1];
+	case 6: return revs_26x[2];
+	}
+#else
+	if (id == 6)
+		return revs_25x[0];
+#endif
+	return unknown;
+}
+
+static const char *pxa27x_get_revision(void)
+{
+	static const char *const rev[] = { "A0", "A1", "B0", "B1", "C0", "C5" };
+	static const char *unknown = "Unknown";
+	uint32_t id;
+
+	if (!cpu_is_pxa27x())
+		return unknown;
+
+	id = pxa_get_cpuid() & CPU_MASK_PXA_REVID;
+
+	if ((id == 5) || (id == 6) || (id > 8))
+		return unknown;
+
+	/* Cap the special PXA270 C5 case. */
+	if (id == 7)
+		id = 5;
+
+	/* Cap the special PXA270M A1 case. */
+	if (id == 8)
+		id = 1;
+
+	return rev[id];
+}
+
+static int print_cpuinfo_pxa2xx(void)
+{
+	if (cpu_is_pxa25x()) {
+		puts("Marvell PXA25x rev. ");
+		puts(pxa25x_get_revision());
+	} else if (cpu_is_pxa27x()) {
+		puts("Marvell PXA27x");
+		if (cpu_is_pxa27xm()) puts("M");
+		puts(" rev. ");
+		puts(pxa27x_get_revision());
+	} else
+		return -EINVAL;
+
+	puts("\n");
+
+	return 0;
+}
+
+int print_cpuinfo(void)
+{
+	int ret;
+
+	puts("CPU: ");
+
+	ret = print_cpuinfo_pxa2xx();
+	if (!ret)
+		return ret;
+
+	return ret;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/pxa/pxa2xx.c b/roms/u-boot/arch/arm/cpu/pxa/pxa2xx.c
new file mode 100644
index 000000000..c7efb6775
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/pxa2xx.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <irq_func.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <command.h>
+
+/* Flush I/D-cache */
+static void cache_flush(void)
+{
+	unsigned long i = 0;
+
+	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i));
+}
+
+int cleanup_before_linux(void)
+{
+	/*
+	 * This function is called just before we call Linux. It prepares
+	 * the processor for Linux by just disabling everything that can
+	 * disturb booting Linux.
+	 */
+
+	disable_interrupts();
+	icache_disable();
+	dcache_disable();
+	cache_flush();
+
+	return 0;
+}
+
+inline void writelrb(uint32_t val, uint32_t addr)
+{
+	writel(val, addr);
+	asm volatile("" : : : "memory");
+	readl(addr);
+	asm volatile("" : : : "memory");
+}
+
+void pxa2xx_dram_init(void)
+{
+	uint32_t tmp;
+	int i;
+	/*
+	 * 1) Initialize Asynchronous static memory controller
+	 */
+
+	writelrb(CONFIG_SYS_MSC0_VAL, MSC0);
+	writelrb(CONFIG_SYS_MSC1_VAL, MSC1);
+	writelrb(CONFIG_SYS_MSC2_VAL, MSC2);
+	/*
+	 * 2) Initialize Card Interface
+	 */
+
+	/* MECR: Memory Expansion Card Register */
+	writelrb(CONFIG_SYS_MECR_VAL, MECR);
+	/* MCMEM0: Card Interface slot 0 timing */
+	writelrb(CONFIG_SYS_MCMEM0_VAL, MCMEM0);
+	/* MCMEM1: Card Interface slot 1 timing */
+	writelrb(CONFIG_SYS_MCMEM1_VAL, MCMEM1);
+	/* MCATT0: Card Interface Attribute Space Timing, slot 0 */
+	writelrb(CONFIG_SYS_MCATT0_VAL, MCATT0);
+	/* MCATT1: Card Interface Attribute Space Timing, slot 1 */
+	writelrb(CONFIG_SYS_MCATT1_VAL, MCATT1);
+	/* MCIO0: Card Interface I/O Space Timing, slot 0 */
+	writelrb(CONFIG_SYS_MCIO0_VAL, MCIO0);
+	/* MCIO1: Card Interface I/O Space Timing, slot 1 */
+	writelrb(CONFIG_SYS_MCIO1_VAL, MCIO1);
+
+	/*
+	 * 3) Configure Fly-By DMA register
+	 */
+
+	writelrb(CONFIG_SYS_FLYCNFG_VAL, FLYCNFG);
+
+	/*
+	 * 4) Initialize Timing for Sync Memory (SDCLK0)
+	 */
+
+	/*
+	 * Before accessing MDREFR we need a valid DRI field, so we set
+	 * this to power on defaults + DRI field.
+	 */
+
+	/* Read current MDREFR config and zero out DRI */
+	tmp = readl(MDREFR) & ~0xfff;
+	/* Add user-specified DRI */
+	tmp |= CONFIG_SYS_MDREFR_VAL & 0xfff;
+	/* Configure important bits */
+	tmp |= MDREFR_K0RUN | MDREFR_SLFRSH;
+	tmp &= ~(MDREFR_APD | MDREFR_E1PIN);
+
+	/* Write MDREFR back */
+	writelrb(tmp, MDREFR);
+
+	/*
+	 * 5) Initialize Synchronous Static Memory (Flash/Peripherals)
+	 */
+
+	/* Initialize SXCNFG register. Assert the enable bits.
+	 *
+	 * Write SXMRS to cause an MRS command to all enabled banks of
+	 * synchronous static memory. Note that SXLCR need not be written
+	 * at this time.
+	 */
+	writelrb(CONFIG_SYS_SXCNFG_VAL, SXCNFG);
+
+	/*
+	 * 6) Initialize SDRAM
+	 */
+
+	writelrb(CONFIG_SYS_MDREFR_VAL & ~MDREFR_SLFRSH, MDREFR);
+	writelrb(CONFIG_SYS_MDREFR_VAL | MDREFR_E1PIN, MDREFR);
+
+	/*
+	 * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure
+	 *    but not enable each SDRAM partition pair.
+	 */
+
+	writelrb(CONFIG_SYS_MDCNFG_VAL &
+		~(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3), MDCNFG);
+
+	/* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */
+	writel(0, OSCR);
+	while (readl(OSCR) < 0x300)
+		asm volatile("" : : : "memory");
+
+	/*
+	 * 8) Trigger a number (usually 8) refresh cycles by attempting
+	 *    non-burst read or write accesses to disabled SDRAM, as commonly
+	 *    specified in the power up sequence documented in SDRAM data
+	 *    sheets. The address(es) used for this purpose must not be
+	 *    cacheable.
+	 */
+	for (i = 9; i >= 0; i--) {
+		writel(i, 0xa0000000);
+		asm volatile("" : : : "memory");
+	}
+	/*
+	 * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1).
+	 */
+
+	tmp = CONFIG_SYS_MDCNFG_VAL &
+		(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3);
+	tmp |= readl(MDCNFG);
+	writelrb(tmp, MDCNFG);
+
+	/*
+	 * 10) Write MDMRS.
+	 */
+
+	writelrb(CONFIG_SYS_MDMRS_VAL, MDMRS);
+
+	/*
+	 * 11) Enable APD
+	 */
+
+	if (CONFIG_SYS_MDREFR_VAL & MDREFR_APD) {
+		tmp = readl(MDREFR);
+		tmp |= MDREFR_APD;
+		writelrb(tmp, MDREFR);
+	}
+}
+
+void pxa_gpio_setup(void)
+{
+	writel(CONFIG_SYS_GPSR0_VAL, GPSR0);
+	writel(CONFIG_SYS_GPSR1_VAL, GPSR1);
+	writel(CONFIG_SYS_GPSR2_VAL, GPSR2);
+#if defined(CONFIG_CPU_PXA27X)
+	writel(CONFIG_SYS_GPSR3_VAL, GPSR3);
+#endif
+
+	writel(CONFIG_SYS_GPCR0_VAL, GPCR0);
+	writel(CONFIG_SYS_GPCR1_VAL, GPCR1);
+	writel(CONFIG_SYS_GPCR2_VAL, GPCR2);
+#if defined(CONFIG_CPU_PXA27X)
+	writel(CONFIG_SYS_GPCR3_VAL, GPCR3);
+#endif
+
+	writel(CONFIG_SYS_GPDR0_VAL, GPDR0);
+	writel(CONFIG_SYS_GPDR1_VAL, GPDR1);
+	writel(CONFIG_SYS_GPDR2_VAL, GPDR2);
+#if defined(CONFIG_CPU_PXA27X)
+	writel(CONFIG_SYS_GPDR3_VAL, GPDR3);
+#endif
+
+	writel(CONFIG_SYS_GAFR0_L_VAL, GAFR0_L);
+	writel(CONFIG_SYS_GAFR0_U_VAL, GAFR0_U);
+	writel(CONFIG_SYS_GAFR1_L_VAL, GAFR1_L);
+	writel(CONFIG_SYS_GAFR1_U_VAL, GAFR1_U);
+	writel(CONFIG_SYS_GAFR2_L_VAL, GAFR2_L);
+	writel(CONFIG_SYS_GAFR2_U_VAL, GAFR2_U);
+#if defined(CONFIG_CPU_PXA27X)
+	writel(CONFIG_SYS_GAFR3_L_VAL, GAFR3_L);
+	writel(CONFIG_SYS_GAFR3_U_VAL, GAFR3_U);
+#endif
+
+	writel(CONFIG_SYS_PSSR_VAL, PSSR);
+}
+
+void pxa_interrupt_setup(void)
+{
+	writel(0, ICLR);
+	writel(0, ICMR);
+#if defined(CONFIG_CPU_PXA27X)
+	writel(0, ICLR2);
+	writel(0, ICMR2);
+#endif
+}
+
+void pxa_clock_setup(void)
+{
+	writel(CONFIG_SYS_CKEN, CKEN);
+	writel(CONFIG_SYS_CCCR, CCCR);
+	asm volatile("mcr	p14, 0, %0, c6, c0, 0" : : "r"(0x0b));
+
+	/* enable the 32Khz oscillator for RTC and PowerManager */
+	writel(OSCC_OON, OSCC);
+	while (!(readl(OSCC) & OSCC_OOK))
+		asm volatile("" : : : "memory");
+}
+
+void pxa_wakeup(void)
+{
+	uint32_t rcsr;
+
+	rcsr = readl(RCSR);
+	writel(rcsr & (RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR), RCSR);
+
+	/* Wakeup */
+	if (rcsr & RCSR_SMR) {
+		writel(PSSR_PH, PSSR);
+		pxa2xx_dram_init();
+		icache_disable();
+		dcache_disable();
+		asm volatile("mov	pc, %0" : : "r"(readl(PSPR)));
+	}
+}
+
+int arch_cpu_init(void)
+{
+	pxa_gpio_setup();
+	pxa_wakeup();
+	pxa_interrupt_setup();
+	pxa_clock_setup();
+	return 0;
+}
+
+void i2c_clk_enable(void)
+{
+	/* Set the global I2C clock on */
+	writel(readl(CKEN) | CKEN14_I2C, CKEN);
+}
+
+void __attribute__((weak)) reset_cpu(void) __attribute__((noreturn));
+
+void reset_cpu(void)
+{
+	uint32_t tmp;
+
+	setbits_le32(OWER, OWER_WME);
+
+	tmp = readl(OSCR);
+	tmp += 0x1000;
+	writel(tmp, OSMR3);
+	writel(MDREFR_SLFRSH, MDREFR);
+
+	for (;;)
+		;
+}
+
+void enable_caches(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+	icache_enable();
+#endif
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	dcache_enable();
+#endif
+}
diff --git a/roms/u-boot/arch/arm/cpu/pxa/relocate.S b/roms/u-boot/arch/arm/cpu/pxa/relocate.S
new file mode 100644
index 000000000..778cd45e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/relocate.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  relocate - PXA270 vector relocation
+ *
+ *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * The PXA SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM, so let's avoid relocating the vectors.
+ */
+	.section	.text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+	bx	lr
+
+ENDPROC(relocate_vectors)
diff --git a/roms/u-boot/arch/arm/cpu/pxa/start.S b/roms/u-boot/arch/arm/cpu/pxa/start.S
new file mode 100644
index 000000000..575abac09
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/start.S
@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for XScale CPU-core
+ *
+ *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (C) 2000	Wolfgang Denk <wd@denx.de>
+ *  Copyright (C) 2001	Alex Zuepke <azu@sysgo.de>
+ *  Copyright (C) 2001	Marius Groger <mag@sysgo.de>
+ *  Copyright (C) 2002	Alex Zupke <azu@sysgo.de>
+ *  Copyright (C) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (C) 2002	Kyle Harris <kharris@nexus-tech.net>
+ *  Copyright (C) 2003	Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
+ *  Copyright (C) 2003	Kshitij <kshitij@ti.com>
+ *  Copyright (C) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (C) 2003	Robert Schwebel <r.schwebel@pengutronix.de>
+ *  Copyright (C) 2004	Texas Instruments <r-woodruff2@ti.com>
+ *  Copyright (C) 2010	Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	bl  cpu_init_crit
+#endif
+
+#ifdef	CONFIG_CPU_PXA25X
+	bl	lock_cache_for_stack
+#endif
+#ifdef	CONFIG_CPU_PXA27X
+	/*
+	 * enable clock for SRAM
+	 */
+	ldr	r0,=CKEN
+	ldr	r1,[r0]
+	orr	r1,r1,#(1 << 20)
+	str	r1,[r0]
+#endif
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+#ifdef CONFIG_CPU_PXA25X
+	/*
+	 * Unlock (actually, disable) the cache now that board_init_f
+	 * is done. We could do this earlier but we would need to add
+	 * a new C runtime hook, whereas c_runtime_cpu_setup already
+	 * exists.
+	 * As this routine is just a call to cpu_init_crit, let us
+	 * tail-optimize and do a simple branch here.
+	 */
+	b	cpu_init_crit
+#else
+	bx	lr
+#endif
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) || defined(CONFIG_CPU_PXA25X)
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* Invalidate I+D+BTB caches */
+	mcr	p15, 0, r0, c8, c7, 0	/* Invalidate Unified TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00003300	@ clear bits 13:12, 9:8 (--VI --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 1 (A) Align
+	mcr	p15, 0, r0, c1, c0, 0
+
+	mov	pc, lr		/* back to my caller */
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_CPU_PXA25X */
+
+/*
+ * Enable MMU to use DCache as DRAM.
+ *
+ * This is useful on PXA25x and PXA26x in early bootstages, where there is no
+ * other possible memory available to hold stack.
+ */
+#ifdef CONFIG_CPU_PXA25X
+.macro CPWAIT reg
+	mrc	p15, 0, \reg, c2, c0, 0
+	mov	\reg, \reg
+	sub	pc, pc, #4
+.endm
+lock_cache_for_stack:
+	/* Domain access -- enable for all CPs */
+	ldr	r0, =0x0000ffff
+	mcr	p15, 0, r0, c3, c0, 0
+
+	/* Point TTBR to MMU table */
+	ldr	r0, =mmutable
+	mcr	p15, 0, r0, c2, c0, 0
+
+	/* Kick in MMU, ICache, DCache, BTB */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, #0x1b00
+	bic	r0, #0x0087
+	orr	r0, #0x1800
+	orr	r0, #0x0005
+	mcr	p15, 0, r0, c1, c0, 0
+	CPWAIT	r0
+
+	/* Unlock Icache, Dcache */
+	mcr	p15, 0, r0, c9, c1, 1
+	mcr	p15, 0, r0, c9, c2, 1
+
+	/* Flush Icache, Dcache, BTB */
+	mcr	p15, 0, r0, c7, c7, 0
+
+	/* Unlock I-TLB, D-TLB */
+	mcr	p15, 0, r0, c10, c4, 1
+	mcr	p15, 0, r0, c10, c8, 1
+
+	/* Flush TLB */
+	mcr	p15, 0, r0, c8, c7, 0
+
+	/* Allocate 4096 bytes of Dcache as RAM */
+
+	/* Drain pending loads and stores */
+	mcr	p15, 0, r0, c7, c10, 4
+
+	mov	r4, #0x00
+	mov	r5, #0x00
+	mov	r2, #0x01
+	mcr	p15, 0, r0, c9, c2, 0
+	CPWAIT	r0
+
+	/* 128 lines reserved (128 x 32bytes = 4096 bytes total) */
+	mov	r0, #128
+	ldr	r1, =0xfffff000
+
+alloc:
+	mcr	p15, 0, r1, c7, c2, 5
+	/* Drain pending loads and stores */
+	mcr	p15, 0, r0, c7, c10, 4
+	strd	r4, [r1], #8
+	strd	r4, [r1], #8
+	strd	r4, [r1], #8
+	strd	r4, [r1], #8
+	subs	r0, #0x01
+	bne	alloc
+	/* Drain pending loads and stores */
+	mcr	p15, 0, r0, c7, c10, 4
+	mov	r2, #0x00
+	mcr	p15, 0, r2, c9, c2, 0
+	CPWAIT	r0
+
+	mov	pc, lr
+
+.section .mmutable, "a"
+mmutable:
+	.align	14
+	/* 0x00000000 - 0xffe00000 : 1:1, uncached mapping */
+	.set	__base, 0
+	.rept	0xfff
+	.word	(__base << 20) | 0xc12
+	.set	__base, __base + 1
+	.endr
+
+	/* 0xfff00000 : 1:1, cached mapping */
+	.word	(0xfff << 20) | 0x1c1e
+#endif	/* CONFIG_CPU_PXA25X */
diff --git a/roms/u-boot/arch/arm/cpu/pxa/timer.c b/roms/u-boot/arch/arm/cpu/pxa/timer.c
new file mode 100644
index 000000000..8e9d61044
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/timer.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell PXA2xx/3xx timer driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+
+int timer_init(void)
+{
+	writel(0, CONFIG_SYS_TIMER_COUNTER);
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/cpu/pxa/usb.c b/roms/u-boot/arch/arm/cpu/pxa/usb.c
new file mode 100644
index 000000000..13e010d91
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/pxa/usb.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ */
+
+#include <common.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
+# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_CPU_PXA27X)
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
+#include <usb.h>
+
+int usb_cpu_init(void)
+{
+#if defined(CONFIG_CPU_MONAHANS)
+	/* Enable USB host clock. */
+	writel(readl(CKENA) | CKENA_2_USBHOST | CKENA_20_UDC, CKENA);
+	udelay(100);
+#endif
+#if defined(CONFIG_CPU_PXA27X)
+	/* Enable USB host clock. */
+	writel(readl(CKEN) | CKEN10_USBHOST, CKEN);
+#endif
+
+#if defined(CONFIG_CPU_MONAHANS)
+	/* Configure Port 2 for Host (USB Client Registers) */
+	writel(0x3000c, UP2OCR);
+#endif
+
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
+	mdelay(11);
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
+
+	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
+	while (readl(UHCHR) & UHCHR_FSBIR)
+		udelay(1);
+
+#if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
+	writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR);
+#endif
+#if defined(CONFIG_CPU_PXA27X)
+	writel(readl(UHCHR) & ~UHCHR_SSEP2, UHCHR);
+#endif
+	writel(readl(UHCHR) & ~(UHCHR_SSEP1 | UHCHR_SSE), UHCHR);
+
+	return 0;
+}
+
+int usb_cpu_stop(void)
+{
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
+	udelay(11);
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
+
+	writel(readl(UHCCOMS) | UHCCOMS_HCR, UHCCOMS);
+	udelay(10);
+
+#if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
+	writel(readl(UHCHR) | UHCHR_SSEP0, UHCHR);
+#endif
+#if defined(CONFIG_CPU_PXA27X)
+	writel(readl(UHCHR) | UHCHR_SSEP2, UHCHR);
+#endif
+	writel(readl(UHCHR) | UHCHR_SSEP1 | UHCHR_SSE, UHCHR);
+
+#if defined(CONFIG_CPU_MONAHANS)
+	/* Disable USB host clock. */
+	writel(readl(CKENA) & ~(CKENA_2_USBHOST | CKENA_20_UDC), CKENA);
+	udelay(100);
+#endif
+#if defined(CONFIG_CPU_PXA27X)
+	/* Disable USB host clock. */
+	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
+#endif
+
+	return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+	return usb_cpu_stop();
+}
+
+# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_CPU_PXA27X) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/roms/u-boot/arch/arm/cpu/sa1100/Makefile b/roms/u-boot/arch/arm/cpu/sa1100/Makefile
new file mode 100644
index 000000000..38193092c
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/sa1100/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y	= start.o
+
+obj-y	+= cpu.o
+obj-y	+= timer.o
diff --git a/roms/u-boot/arch/arm/cpu/sa1100/cpu.c b/roms/u-boot/arch/arm/cpu/sa1100/cpu.c
new file mode 100644
index 000000000..6f67f7fc2
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/sa1100/cpu.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/system.h>
+#include <asm/io.h>
+
+static void cache_flush(void);
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * just disable everything that can disturb booting linux
+	 */
+
+	disable_interrupts();
+
+	/* turn off I-cache */
+	icache_disable();
+	dcache_disable();
+
+	/* flush I-cache */
+	cache_flush();
+
+	return (0);
+}
+
+/* flush I/D-cache */
+static void cache_flush (void)
+{
+	unsigned long i = 0;
+
+	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+}
+
+#define RST_BASE 0x90030000
+#define RSRR	0x00
+#define RCSR	0x04
+
+__attribute__((noreturn)) void reset_cpu(void)
+{
+	/* repeat endlessly */
+	while (1) {
+		writel(0, RST_BASE + RCSR);
+		writel(1, RST_BASE + RSRR);
+	}
+}
diff --git a/roms/u-boot/arch/arm/cpu/sa1100/start.S b/roms/u-boot/arch/arm/cpu/sa1100/start.S
new file mode 100644
index 000000000..8eb005309
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/sa1100/start.S
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for SA1100 CPU
+ *
+ *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (C) 2000	Wolfgang Denk <wd@denx.de>
+ *  Copyright (c) 2001	Alex Züpke <azu@sysgo.de>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+	.globl	reset
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	bl	cpu_init_crit
+#endif
+
+	bl	_main
+
+/*------------------------------------------------------------------------------*/
+
+	.globl	c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+	mov	pc, lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+/* Interrupt-Controller base address */
+IC_BASE:	.word	0x90050000
+#define ICMR	0x04
+
+
+/* Reset-Controller */
+RST_BASE:		.word   0x90030000
+#define RSRR	0x00
+#define RCSR	0x04
+
+
+/* PWR */
+PWR_BASE:		.word   0x90020000
+#define PSPR    0x08
+#define PPCR    0x14
+cpuspeed:		.word   CONFIG_SYS_CPUSPEED
+
+
+cpu_init_crit:
+	/*
+	 * mask all IRQs
+	 */
+	ldr	r0, IC_BASE
+	mov	r1, #0x00
+	str	r1, [r0, #ICMR]
+
+	/* set clock speed */
+	ldr	r0, PWR_BASE
+	ldr	r1, cpuspeed
+	str	r1, [r0, #PPCR]
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a lowlevel_init.S in your board directory.
+	 */
+	mov	ip,	lr
+	bl	lowlevel_init
+	mov	lr,	ip
+#endif
+
+	/*
+	 * disable MMU stuff and enable I-cache
+	 */
+	mrc	p15,0,r0,c1,c0
+	bic	r0, r0, #0x00002000	@ clear bit 13 (X)
+	bic	r0, r0, #0x0000000f	@ clear bits 3-0 (WCAM)
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) Icache
+	orr	r0, r0, #0x00000002	@ set bit 1 (A) Align
+	mcr	p15,0,r0,c1,c0
+
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	mov	pc, lr
diff --git a/roms/u-boot/arch/arm/cpu/sa1100/timer.c b/roms/u-boot/arch/arm/cpu/sa1100/timer.c
new file mode 100644
index 000000000..a5cdaf5a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/sa1100/timer.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+#include <common.h>
+#include <SA-1100.h>
+#include <time.h>
+#include <linux/delay.h>
+
+static ulong get_timer_masked (void)
+{
+	return OSCR;
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked ();
+}
+
+void __udelay(unsigned long usec)
+{
+	ulong tmo;
+	ulong endtime;
+	signed long diff;
+
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= CONFIG_SYS_HZ;
+		tmo /= 1000;
+	} else {
+		tmo = usec * CONFIG_SYS_HZ;
+		tmo /= (1000*1000);
+	}
+
+	endtime = get_timer_masked () + tmo;
+
+	do {
+		ulong now = get_timer_masked ();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/cpu/u-boot-spl.lds b/roms/u-boot/arch/arm/cpu/u-boot-spl.lds
new file mode 100644
index 000000000..97899a567
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/u-boot-spl.lds
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		__image_copy_start = .;
+		*(.vectors)
+		CPUDIR/start.o (.text*)
+		*(.text*)
+		*(.glue*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(4);
+	.binman_sym_table : {
+		__binman_sym_start = .;
+		KEEP(*(SORT(.binman_sym*)));
+		__binman_sym_end = .;
+	}
+
+	. = ALIGN(4);
+
+	__image_copy_end = .;
+
+	.rel.dyn : {
+		__rel_dyn_start = .;
+		*(.rel*)
+		__rel_dyn_end = .;
+	}
+
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
+
+	.bss __rel_dyn_start (OVERLAY) : {
+		__bss_start = .;
+		*(.bss*)
+		 . = ALIGN(4);
+		__bss_end = .;
+	}
+	__bss_size = __bss_end - __bss_start;
+	.dynsym _image_binary_end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
+}
+
+#if defined(IMAGE_MAX_SIZE)
+ASSERT(__image_copy_end - __image_copy_start <= (IMAGE_MAX_SIZE), \
+	"SPL image too big");
+#endif
+
+#if defined(CONFIG_SPL_BSS_MAX_SIZE)
+ASSERT(__bss_end - __bss_start <= (CONFIG_SPL_BSS_MAX_SIZE), \
+	"SPL image BSS too big");
+#endif
+
+#if defined(CONFIG_SPL_MAX_FOOTPRINT)
+ASSERT(__bss_end - _start <= (CONFIG_SPL_MAX_FOOTPRINT), \
+	"SPL image plus BSS too big");
+#endif
diff --git a/roms/u-boot/arch/arm/cpu/u-boot.lds b/roms/u-boot/arch/arm/cpu/u-boot.lds
new file mode 100644
index 000000000..0eb164d2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/cpu/u-boot.lds
@@ -0,0 +1,240 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+#include <config.h>
+#include <asm/psci.h>
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+#ifndef CONFIG_CMDLINE
+	/DISCARD/ : { *(.u_boot_list_2_cmd_*) }
+#endif
+#if defined(CONFIG_ARMV7_SECURE_BASE) && defined(CONFIG_ARMV7_NONSEC)
+	/*
+	 * If CONFIG_ARMV7_SECURE_BASE is true, secure code will not
+	 * bundle with u-boot, and code offsets are fixed. Secure zone
+	 * only needs to be copied from the loading address to
+	 * CONFIG_ARMV7_SECURE_BASE, which is the linking and running
+	 * address for secure code.
+	 *
+	 * If CONFIG_ARMV7_SECURE_BASE is undefined, the secure zone will
+	 * be included in u-boot address space, and some absolute address
+	 * were used in secure code. The absolute addresses of the secure
+	 * code also needs to be relocated along with the accompanying u-boot
+	 * code.
+	 *
+	 * So DISCARD is only for CONFIG_ARMV7_SECURE_BASE.
+	 */
+	/DISCARD/ : { *(.rel._secure*) }
+#endif
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		*(.__image_copy_start)
+		*(.vectors)
+		CPUDIR/start.o (.text*)
+	}
+
+	/* This needs to come before *(.text*) */
+	.__efi_runtime_start : {
+		*(.__efi_runtime_start)
+	}
+
+	.efi_runtime : {
+		*(.text.efi_runtime*)
+		*(.rodata.efi_runtime*)
+		*(.data.efi_runtime*)
+	}
+
+	.__efi_runtime_stop : {
+		*(.__efi_runtime_stop)
+	}
+
+	.text_rest :
+	{
+		*(.text*)
+	}
+
+#ifdef CONFIG_ARMV7_NONSEC
+
+	/* Align the secure section only if we're going to use it in situ */
+	.__secure_start
+#ifndef CONFIG_ARMV7_SECURE_BASE
+		ALIGN(CONSTANT(COMMONPAGESIZE))
+#endif
+	: {
+		KEEP(*(.__secure_start))
+	}
+
+#ifndef CONFIG_ARMV7_SECURE_BASE
+#define CONFIG_ARMV7_SECURE_BASE
+#define __ARMV7_PSCI_STACK_IN_RAM
+#endif
+
+	.secure_text CONFIG_ARMV7_SECURE_BASE :
+		AT(ADDR(.__secure_start) + SIZEOF(.__secure_start))
+	{
+		*(._secure.text)
+	}
+
+	.secure_data : AT(LOADADDR(.secure_text) + SIZEOF(.secure_text))
+	{
+		*(._secure.data)
+	}
+
+#ifdef CONFIG_ARMV7_PSCI
+	.secure_stack ALIGN(ADDR(.secure_data) + SIZEOF(.secure_data),
+			    CONSTANT(COMMONPAGESIZE)) (NOLOAD) :
+#ifdef __ARMV7_PSCI_STACK_IN_RAM
+		AT(ADDR(.secure_stack))
+#else
+		AT(LOADADDR(.secure_data) + SIZEOF(.secure_data))
+#endif
+	{
+		KEEP(*(.__secure_stack_start))
+
+		/* Skip addreses for stack */
+		. = . + CONFIG_ARMV7_PSCI_NR_CPUS * ARM_PSCI_STACK_SIZE;
+
+		/* Align end of stack section to page boundary */
+		. = ALIGN(CONSTANT(COMMONPAGESIZE));
+
+		KEEP(*(.__secure_stack_end))
+
+#ifdef CONFIG_ARMV7_SECURE_MAX_SIZE
+		/*
+		 * We are not checking (__secure_end - __secure_start) here,
+		 * as these are the load addresses, and do not include the
+		 * stack section. Instead, use the end of the stack section
+		 * and the start of the text section.
+		 */
+		ASSERT((. - ADDR(.secure_text)) <= CONFIG_ARMV7_SECURE_MAX_SIZE,
+		       "Error: secure section exceeds secure memory size");
+#endif
+	}
+
+#ifndef __ARMV7_PSCI_STACK_IN_RAM
+	/* Reset VMA but don't allocate space if we have secure SRAM */
+	. = LOADADDR(.secure_stack);
+#endif
+
+#endif
+
+	.__secure_end : AT(ADDR(.__secure_end)) {
+		*(.__secure_end)
+		LONG(0x1d1071c);	/* Must output something to reset LMA */
+	}
+#endif
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+
+	. = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(4);
+
+	.efi_runtime_rel_start :
+	{
+		*(.__efi_runtime_rel_start)
+	}
+
+	.efi_runtime_rel : {
+		*(.rel*.efi_runtime)
+		*(.rel*.efi_runtime.*)
+	}
+
+	.efi_runtime_rel_stop :
+	{
+		*(.__efi_runtime_rel_stop)
+	}
+
+	. = ALIGN(4);
+
+	.image_copy_end :
+	{
+		*(.__image_copy_end)
+	}
+
+	.rel_dyn_start :
+	{
+		*(.__rel_dyn_start)
+	}
+
+	.rel.dyn : {
+		*(.rel*)
+	}
+
+	.rel_dyn_end :
+	{
+		*(.__rel_dyn_end)
+	}
+
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
+
+	/*
+	 * Deprecated: this MMU section is used by pxa at present but
+	 * should not be used by new boards/CPUs.
+	 */
+	. = ALIGN(4096);
+	.mmutable : {
+		*(.mmutable)
+	}
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+		__bss_base = .;
+	}
+
+	.bss __bss_base (OVERLAY) : {
+		*(.bss*)
+		 . = ALIGN(4);
+		 __bss_limit = .;
+	}
+
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
+	}
+
+	.dynsym _image_binary_end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu.hash : { *(.gnu.hash) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
+	.gnu.linkonce.armexidx : { *(.gnu.linkonce.armexidx.*) }
+}
diff --git a/roms/u-boot/arch/arm/dts/Makefile b/roms/u-boot/arch/arm/dts/Makefile
new file mode 100644
index 000000000..9fb38682e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/Makefile
@@ -0,0 +1,1124 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb
+dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb
+dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb
+dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb
+
+dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
+dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
+dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
+	exynos4210-smdkv310.dtb \
+	exynos4210-universal_c210.dtb \
+	exynos4210-trats.dtb \
+	exynos4412-trats2.dtb \
+	exynos4412-odroid.dtb
+
+dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
+dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb
+
+dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb
+
+dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
+	exynos5250-snow.dtb \
+	exynos5250-spring.dtb \
+	exynos5250-smdk5250.dtb \
+	exynos5420-smdk5420.dtb \
+	exynos5420-peach-pit.dtb \
+	exynos5800-peach-pi.dtb \
+	exynos5422-odroidxu3.dtb
+dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
+
+dtb-$(CONFIG_ARCH_DAVINCI) += \
+	da850-evm.dtb \
+	da850-lcdk.dtb \
+	da850-lego-ev3.dtb
+
+dtb-$(CONFIG_ARCH_KIRKWOOD) += \
+	kirkwood-atl-sbx81lifkw.dtb \
+	kirkwood-atl-sbx81lifxcat.dtb \
+	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-d2net.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-guruplug-server-plus.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-is2.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-net2big.dtb \
+	kirkwood-ns2.dtb \
+	kirkwood-ns2lite.dtb \
+	kirkwood-ns2max.dtb \
+	kirkwood-ns2mini.dtb \
+	kirkwood-openrd-base.dtb \
+	kirkwood-openrd-client.dtb \
+	kirkwood-openrd-ultimate.dtb \
+	kirkwood-pogo_e02.dtb \
+	kirkwood-sheevaplug.dtb
+
+dtb-$(CONFIG_MACH_S900) += \
+	bubblegum_96.dtb
+dtb-$(CONFIG_MACH_S700) += \
+	s700-cubieboard7.dtb
+
+dtb-$(CONFIG_ROCKCHIP_PX30) += \
+	px30-evb.dtb \
+	px30-firefly.dtb \
+	px30-px30-core-ctouch2.dtb \
+	px30-px30-core-edimm2.2.dtb \
+	rk3326-odroid-go2.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3036) += \
+	rk3036-sdk.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3128) += \
+	rk3128-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3188) += \
+	rk3188-radxarock.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK322X) += \
+	rk3229-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3288) += \
+	rk3288-evb.dtb \
+	rk3288-firefly.dtb \
+	rk3288-miqi.dtb \
+	rk3288-phycore-rdk.dtb \
+	rk3288-popmetal.dtb \
+	rk3288-rock2-square.dtb \
+	rk3288-rock-pi-n8.dtb \
+	rk3288-tinker.dtb \
+	rk3288-tinker-s.dtb \
+	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-mickey.dtb \
+	rk3288-veyron-minnie.dtb \
+	rk3288-veyron-speedy.dtb \
+	rk3288-vyasa.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3308) += \
+	rk3308-evb.dtb \
+	rk3308-roc-cc.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3328) += \
+	rk3328-evb.dtb \
+	rk3328-nanopi-r2s.dtb \
+	rk3328-roc-cc.dtb \
+	rk3328-rock64.dtb \
+	rk3328-rock-pi-e.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3368) += \
+	rk3368-lion-haikou.dtb \
+	rk3368-sheep.dtb \
+	rk3368-geekbox.dtb \
+	rk3368-px5-evb.dtb \
+
+dtb-$(CONFIG_ROCKCHIP_RK3399) += \
+	rk3399-evb.dtb \
+	rk3399-ficus.dtb \
+	rk3399-firefly.dtb \
+	rk3399-gru-bob.dtb \
+	rk3399-khadas-edge.dtb \
+	rk3399-khadas-edge-captain.dtb \
+	rk3399-khadas-edge-v.dtb \
+	rk3399-leez-p710.dtb \
+	rk3399-nanopc-t4.dtb \
+	rk3399-nanopi-m4.dtb \
+	rk3399-nanopi-m4-2gb.dtb \
+	rk3399-nanopi-m4b.dtb \
+	rk3399-nanopi-neo4.dtb \
+	rk3399-nanopi-r4s.dtb \
+	rk3399-orangepi.dtb \
+	rk3399-pinebook-pro.dtb \
+	rk3399-puma-haikou.dtb \
+	rk3399-roc-pc.dtb \
+	rk3399-roc-pc-mezzanine.dtb \
+	rk3399-rock-pi-4a.dtb \
+	rk3399-rock-pi-4b.dtb \
+	rk3399-rock-pi-4c.dtb \
+	rk3399-rock960.dtb \
+	rk3399-rockpro64.dtb \
+	rk3399pro-rock-pi-n10.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RV1108) += \
+	rv1108-elgin-r1.dtb \
+	rv1108-evb.dtb
+
+dtb-$(CONFIG_ARCH_S5P4418) += \
+	s5p4418-nanopi2.dtb
+
+dtb-$(CONFIG_ARCH_MESON) += \
+	meson-gxbb-nanopi-k2.dtb \
+	meson-gxbb-odroidc2.dtb \
+	meson-gxbb-nanopi-k2.dtb \
+	meson-gxbb-p200.dtb \
+	meson-gxbb-p201.dtb \
+	meson-gxl-s905x-p212.dtb \
+	meson-gxl-s805x-libretech-ac.dtb \
+	meson-gxl-s905x-libretech-cc.dtb \
+	meson-gxl-s905x-libretech-cc-v2.dtb \
+	meson-gxl-s905x-khadas-vim.dtb \
+	meson-gxl-s905d-libretech-pc.dtb \
+	meson-gxm-khadas-vim2.dtb \
+	meson-gxm-s912-libretech-pc.dtb \
+	meson-gxm-wetek-core2.dtb \
+	meson-axg-s400.dtb \
+	meson-g12a-u200.dtb \
+	meson-g12a-sei510.dtb \
+	meson-g12b-gtking.dtb \
+	meson-g12b-gtking-pro.dtb \
+	meson-g12b-odroid-n2.dtb \
+	meson-g12b-odroid-n2-plus.dtb \
+	meson-g12b-a311d-khadas-vim3.dtb \
+	meson-sm1-khadas-vim3l.dtb \
+	meson-sm1-odroid-c4.dtb \
+	meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb \
+	tegra20-colibri.dtb \
+	tegra30-apalis.dtb \
+	tegra30-beaver.dtb \
+	tegra30-cardhu.dtb \
+	tegra30-colibri.dtb \
+	tegra30-tec-ng.dtb \
+	tegra114-dalmore.dtb \
+	tegra124-apalis.dtb \
+	tegra124-jetson-tk1.dtb \
+	tegra124-nyan-big.dtb \
+	tegra124-cei-tk1-som.dtb \
+	tegra124-venice2.dtb \
+	tegra186-p2771-0000-000.dtb \
+	tegra186-p2771-0000-500.dtb \
+	tegra210-p2371-0000.dtb \
+	tegra210-p2371-2180.dtb \
+	tegra210-p2571.dtb \
+	tegra210-p3450-0000.dtb
+
+dtb-$(CONFIG_ARCH_MVEBU) +=			\
+	armada-3720-db.dtb			\
+	armada-3720-espressobin.dtb		\
+	armada-3720-turris-mox.dtb		\
+	armada-3720-uDPU.dtb			\
+	armada-375-db.dtb			\
+	armada-385-atl-x530.dtb			\
+	armada-385-atl-x530DP.dtb		\
+	armada-385-db-88f6820-amc.dtb		\
+	armada-385-turris-omnia.dtb		\
+	armada-388-clearfog.dtb			\
+	armada-388-gp.dtb			\
+	armada-388-helios4.dtb			\
+	armada-38x-controlcenterdc.dtb		\
+	armada-7040-db-nand.dtb			\
+	armada-7040-db.dtb			\
+	armada-8040-clearfog-gt-8k.dtb		\
+	armada-8040-db.dtb			\
+	armada-8040-mcbin.dtb			\
+	armada-8040-puzzle-m801.dtb		\
+	armada-xp-crs305-1g-4s.dtb		\
+	armada-xp-crs305-1g-4s-bit.dtb		\
+	armada-xp-crs326-24g-2s.dtb		\
+	armada-xp-crs326-24g-2s-bit.dtb		\
+	armada-xp-crs328-4c-20s-4s.dtb		\
+	armada-xp-crs328-4c-20s-4s-bit.dtb	\
+	armada-xp-db-xc3-24g4xg.dtb		\
+	armada-xp-gp.dtb			\
+	armada-xp-maxbcm.dtb			\
+	armada-xp-synology-ds414.dtb		\
+	armada-xp-theadorable.dtb		\
+	cn9130-db-A.dtb				\
+	cn9130-db-B.dtb				\
+	cn9131-db-A.dtb				\
+	cn9131-db-B.dtb				\
+	cn9132-db-A.dtb				\
+	cn9132-db-B.dtb				\
+	cn9130-crb-A.dtb			\
+	cn9130-crb-B.dtb
+
+dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
+	uniphier-ld11-global.dtb \
+	uniphier-ld11-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD20) += \
+	uniphier-ld20-global.dtb \
+	uniphier-ld20-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD4) += \
+	uniphier-ld4-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD6B) += \
+	uniphier-ld6b-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PRO4) += \
+	uniphier-pro4-ace.dtb \
+	uniphier-pro4-ref.dtb \
+	uniphier-pro4-sanji.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PRO5) += \
+	uniphier-pro5-4kbox.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PXS2) += \
+	uniphier-pxs2-gentil.dtb \
+	uniphier-pxs2-vodka.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PXS3) += \
+	uniphier-pxs3-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
+	uniphier-sld8-ref.dtb
+
+dtb-$(CONFIG_ARCH_ZYNQ) += \
+	bitmain-antminer-s9.dtb \
+	zynq-cc108.dtb \
+	zynq-cse-nand.dtb \
+	zynq-cse-nor.dtb \
+	zynq-cse-qspi-single.dtb \
+	zynq-dlc20-rev1.0.dtb \
+	zynq-microzed.dtb \
+	zynq-minized.dtb \
+	zynq-picozed.dtb \
+	zynq-syzygy-hub.dtb \
+	zynq-topic-miami.dtb \
+	zynq-topic-miamilite.dtb \
+	zynq-topic-miamiplus.dtb \
+	zynq-zc702.dtb \
+	zynq-zc706.dtb \
+	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm011.dtb \
+	zynq-zc770-xm011-x16.dtb \
+	zynq-zc770-xm012.dtb \
+	zynq-zc770-xm013.dtb \
+	zynq-zed.dtb \
+	zynq-zturn.dtb \
+	zynq-zturn-v5.dtb \
+	zynq-zybo.dtb \
+	zynq-zybo-z7.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += \
+	avnet-ultra96-rev1.dtb			\
+	avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb	\
+	zynqmp-a2197-revA.dtb			\
+	zynqmp-e-a2197-00-revA.dtb		\
+	zynqmp-g-a2197-00-revA.dtb		\
+	zynqmp-m-a2197-01-revA.dtb		\
+	zynqmp-m-a2197-02-revA.dtb		\
+	zynqmp-m-a2197-03-revA.dtb		\
+	zynqmp-p-a2197-00-revA.dtb		\
+	zynqmp-mini.dtb				\
+	zynqmp-mini-emmc0.dtb			\
+	zynqmp-mini-emmc1.dtb			\
+	zynqmp-mini-nand.dtb			\
+	zynqmp-mini-qspi.dtb			\
+	zynqmp-sm-k26-revA.dtb			\
+	zynqmp-smk-k26-revA.dtb			\
+	zynqmp-sck-kv-g-revA.dtbo		\
+	zynqmp-sck-kv-g-revB.dtbo		\
+	zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb	\
+	zynqmp-zcu100-revC.dtb			\
+	zynqmp-zcu102-revA.dtb			\
+	zynqmp-zcu102-revB.dtb			\
+	zynqmp-zcu102-rev1.0.dtb		\
+	zynqmp-zcu102-rev1.1.dtb		\
+	zynqmp-zcu104-revA.dtb			\
+	zynqmp-zcu104-revC.dtb			\
+	zynqmp-zcu106-revA.dtb			\
+	zynqmp-zcu111-revA.dtb			\
+	zynqmp-zcu1275-revA.dtb			\
+	zynqmp-zcu1275-revB.dtb			\
+	zynqmp-zcu1285-revA.dtb			\
+	zynqmp-zcu208-revA.dtb			\
+	zynqmp-zcu216-revA.dtb			\
+	zynqmp-zc1232-revA.dtb			\
+	zynqmp-zc1254-revA.dtb			\
+	zynqmp-zc1751-xm015-dc1.dtb		\
+	zynqmp-zc1751-xm016-dc2.dtb		\
+	zynqmp-zc1751-xm017-dc3.dtb		\
+	zynqmp-zc1751-xm018-dc4.dtb		\
+	zynqmp-zc1751-xm019-dc5.dtb
+dtb-$(CONFIG_ARCH_VERSAL) += \
+	versal-mini.dtb \
+	versal-mini-emmc0.dtb \
+	versal-mini-emmc1.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \
+	zynqmp-r5.dtb
+dtb-$(CONFIG_AM33XX) += \
+	am335x-baltos.dtb \
+	am335x-bone.dtb \
+	am335x-boneblack.dtb \
+	am335x-brppt1-mmc.dtb \
+	am335x-brppt1-nand.dtb \
+	am335x-brppt1-spi.dtb \
+	am335x-brxre1.dtb \
+	am335x-brsmarc1.dtb \
+	am335x-draco.dtb \
+	am335x-evm.dtb \
+	am335x-evmsk.dtb \
+	am335x-bonegreen.dtb \
+	am335x-icev2.dtb \
+	am335x-pocketbeagle.dtb \
+	am335x-pxm50.dtb \
+	am335x-rut.dtb \
+	am335x-shc.dtb \
+	am335x-pdu001.dtb \
+	am335x-chiliboard.dtb \
+	am335x-sl50.dtb \
+	am335x-base0033.dtb \
+	am335x-guardian.dtb \
+	am335x-wega-rdk.dtb \
+	am335x-regor-rdk.dtb
+dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb	\
+	am43x-epos-evm.dtb \
+	am437x-idk-evm.dtb \
+	am4372-generic.dtb \
+	am437x-cm-t43.dtb
+dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb
+dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
+dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
+
+dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
+	socfpga_agilex_socdk.dtb			\
+	socfpga_arria5_secu1.dtb			\
+	socfpga_arria5_socdk.dtb			\
+	socfpga_arria10_socdk_sdmmc.dtb			\
+	socfpga_cyclone5_mcvevk.dtb			\
+	socfpga_cyclone5_is1.dtb			\
+	socfpga_cyclone5_socdk.dtb			\
+	socfpga_cyclone5_dbm_soc1.dtb			\
+	socfpga_cyclone5_de0_nano_soc.dtb		\
+	socfpga_cyclone5_de1_soc.dtb			\
+	socfpga_cyclone5_de10_nano.dtb			\
+	socfpga_cyclone5_sockit.dtb			\
+	socfpga_cyclone5_socrates.dtb			\
+	socfpga_cyclone5_sr1500.dtb			\
+	socfpga_cyclone5_vining_fpga.dtb		\
+	socfpga_stratix10_socdk.dtb
+
+dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb	\
+	dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb
+dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
+	am57xx-beagle-x15-revb1.dtb \
+	am57xx-beagle-x15-revc.dtb \
+	am5729-beagleboneai.dtb \
+	am574x-idk.dtb \
+	am572x-idk.dtb	\
+	am571x-idk.dtb
+dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
+
+dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
+	ls1021a-qds-lpuart.dtb \
+	ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
+	ls1021a-iot-duart.dtb ls1021a-tsn.dtb
+dtb-$(CONFIG_TARGET_PG_WCOM_SELI8) += ls1021a-pg-wcom-seli8.dtb
+dtb-$(CONFIG_TARGET_PG_WCOM_EXPU1) += ls1021a-pg-wcom-expu1.dtb
+
+dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
+	fsl-ls2080a-qds-42-x.dtb \
+	fsl-ls2080a-rdb.dtb \
+	fsl-ls2081a-rdb.dtb \
+	fsl-ls2088a-rdb-qspi.dtb \
+	fsl-ls1088a-rdb.dtb \
+	fsl-ls1088a-qds.dtb \
+	fsl-ls1088a-qds-21-x.dtb \
+	fsl-ls1088a-qds-29-x.dtb \
+	fsl-ls1028a-rdb.dtb \
+	fsl-ls1028a-qds-duart.dtb \
+	fsl-ls1028a-qds-lpuart.dtb \
+	fsl-lx2160a-rdb.dtb \
+	fsl-lx2160a-qds.dtb \
+	fsl-lx2160a-qds-3-x-x.dtb \
+	fsl-lx2160a-qds-3-11-x.dtb \
+	fsl-lx2160a-qds-7-x-x.dtb \
+	fsl-lx2160a-qds-7-11-x.dtb \
+	fsl-lx2160a-qds-19-x-x.dtb \
+	fsl-lx2160a-qds-19-11-x.dtb \
+	fsl-lx2160a-qds-20-x-x.dtb \
+	fsl-lx2160a-qds-20-11-x.dtb \
+	fsl-lx2162a-qds.dtb\
+	fsl-lx2162a-qds-17-x.dtb\
+	fsl-lx2162a-qds-18-x.dtb\
+	fsl-lx2162a-qds-20-x.dtb
+dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
+	fsl-ls1043a-qds-lpuart.dtb \
+	fsl-ls1043a-rdb.dtb \
+	fsl-ls1046a-qds-duart.dtb \
+	fsl-ls1046a-qds-lpuart.dtb \
+	fsl-ls1046a-rdb.dtb \
+	fsl-ls1046a-frwy.dtb \
+	fsl-ls1012a-qds.dtb \
+	fsl-ls1012a-rdb.dtb \
+	fsl-ls1012a-2g5rdb.dtb \
+	fsl-ls1012a-frdm.dtb \
+	fsl-ls1012a-frwy.dtb
+dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
+	fsl-ls1028a-kontron-sl28-var1.dtb \
+	fsl-ls1028a-kontron-sl28-var2.dtb \
+	fsl-ls1028a-kontron-sl28-var3.dtb \
+	fsl-ls1028a-kontron-sl28-var4.dtb \
+
+dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
+dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
+
+dtb-$(CONFIG_TARGET_STEMMY) += ste-ux500-samsung-stemmy.dtb
+
+dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \
+	stm32429i-eval.dtb \
+	stm32f469-disco.dtb
+
+dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
+	stm32f769-disco.dtb \
+	stm32746g-eval.dtb
+dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
+	stm32h743i-eval.dtb \
+	stm32h750i-art-pi.dtb
+
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet-3f.dtb \
+	sun4i-a10-inet-3w.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-ampe-a76.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-86vs.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31-mixtile-loftq.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-ainol-aw1.dtb \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-m5.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-primo73.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb \
+	sun7i-a20-yones-toptech-bd1078.dtb
+dtb-$(CONFIG_MACH_SUN8I_A23) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb
+dtb-$(CONFIG_MACH_SUN8I_A33) += \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic-edition.dtb \
+	sun8i-r16-parrot.dtb
+dtb-$(CONFIG_MACH_SUN8I_A83T) += \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb
+dtb-$(CONFIG_MACH_SUN8I_H3) += \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb \
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-rervision-dvk.dtb
+dtb-$(CONFIG_MACH_SUN8I_R40) += \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+dtb-$(CONFIG_MACH_SUN8I_V3S) += \
+	sun8i-s3-pinecube.dtb \
+	sun8i-v3s-licheepi-zero.dtb
+dtb-$(CONFIG_MACH_SUN50I_H5) += \
+	sun50i-h5-bananapi-m2-plus.dtb \
+	sun50i-h5-emlid-neutis-n5-devboard.dtb \
+	sun50i-h5-libretech-all-h3-cc.dtb \
+	sun50i-h5-libretech-all-h3-it.dtb \
+	sun50i-h5-libretech-all-h5-cc.dtb \
+	sun50i-h5-nanopi-neo2.dtb \
+	sun50i-h5-nanopi-neo-plus2.dtb \
+	sun50i-h5-orangepi-zero-plus.dtb \
+	sun50i-h5-orangepi-pc2.dtb \
+	sun50i-h5-orangepi-prime.dtb \
+	sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_MACH_SUN50I_H6) += \
+	sun50i-h6-beelink-gs1.dtb \
+	sun50i-h6-orangepi-3.dtb \
+	sun50i-h6-orangepi-lite2.dtb \
+	sun50i-h6-orangepi-one-plus.dtb \
+	sun50i-h6-pine-h64.dtb \
+	sun50i-h6-tanix-tx6.dtb
+dtb-$(CONFIG_MACH_SUN50I_H616) += \
+	sun50i-h616-orangepi-zero2.dtb
+dtb-$(CONFIG_MACH_SUN50I) += \
+	sun50i-a64-amarula-relic.dtb \
+	sun50i-a64-bananapi-m64.dtb \
+	sun50i-a64-nanopi-a64.dtb \
+	sun50i-a64-oceanic-5205-5inmfd.dtb \
+	sun50i-a64-olinuxino.dtb \
+	sun50i-a64-olinuxino-emmc.dtb \
+	sun50i-a64-orangepi-win.dtb \
+	sun50i-a64-pine64-lts.dtb \
+	sun50i-a64-pine64-plus.dtb \
+	sun50i-a64-pine64.dtb \
+	sun50i-a64-pinebook.dtb \
+	sun50i-a64-pinephone-1.0.dtb \
+	sun50i-a64-pinephone-1.1.dtb \
+	sun50i-a64-pinephone-1.2.dtb \
+	sun50i-a64-pinetab.dtb \
+	sun50i-a64-sopine-baseboard.dtb \
+	sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb \
+	sun9i-a80-cx-a99.dtb
+
+dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
+	vf610-colibri.dtb \
+	vf610-twr.dtb \
+	vf610-pcm052.dtb \
+	vf610-bk4r1.dtb
+
+dtb-$(CONFIG_MX23) += \
+	imx23-evk.dtb
+
+dtb-$(CONFIG_TARGET_MX23_OLINUXINO) += \
+	imx23-olinuxino.dtb
+
+dtb-$(CONFIG_MX28) += \
+	imx28-xea.dtb
+
+dtb-$(CONFIG_MX51) += \
+	imx51-babbage.dtb
+
+dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \
+	imx53-qsb.dtb \
+	imx53-kp.dtb \
+	imx53-m53menlo.dtb \
+	imx53-usbarmory.dtb
+
+ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
+dtb-y += \
+	imx6dl-aristainetos2c_7.dtb \
+	imx6dl-aristainetos2c_cslb_7.dtb \
+	imx6dl-brppt2.dtb \
+	imx6dl-cubox-i.dtb \
+	imx6dl-cubox-i-emmc-som-v15.dtb \
+	imx6dl-cubox-i-som-v15.dtb \
+	imx6dl-dhcom-pdk2.dtb \
+	imx6dl-gw51xx.dtb \
+	imx6dl-gw52xx.dtb \
+	imx6dl-gw53xx.dtb \
+	imx6dl-gw54xx.dtb \
+	imx6dl-gw551x.dtb \
+	imx6dl-gw552x.dtb \
+	imx6dl-gw553x.dtb \
+	imx6dl-gw560x.dtb \
+	imx6dl-gw5903.dtb \
+	imx6dl-gw5904.dtb \
+	imx6dl-gw5907.dtb \
+	imx6dl-gw5910.dtb \
+	imx6dl-gw5912.dtb \
+	imx6dl-gw5913.dtb \
+	imx6dl-hummingboard2.dtb \
+	imx6dl-hummingboard2-emmc-som-v15.dtb \
+	imx6dl-hummingboard2-som-v15.dtb \
+	imx6dl-hummingboard.dtb \
+	imx6dl-hummingboard-emmc-som-v15.dtb \
+	imx6dl-hummingboard-som-v15.dtb \
+	imx6dl-icore.dtb \
+	imx6dl-icore-mipi.dtb \
+	imx6dl-icore-rqs.dtb \
+	imx6dl-mba6a.dtb \
+	imx6dl-mba6b.dtb \
+	imx6dl-mamoj.dtb \
+	imx6dl-nitrogen6x.dtb \
+	imx6dl-pico.dtb \
+	imx6dl-udoo.dtb \
+	imx6dl-riotboard.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabresd.dtb \
+	imx6dl-wandboard-revd1.dtb \
+
+endif
+
+ifneq ($(CONFIG_MX6Q)$(CONFIG_MX6QDL),)
+dtb-y += \
+	imx6-apalis.dtb \
+	imx6q-cm-fx6.dtb \
+	imx6q-cubox-i.dtb \
+	imx6q-cubox-i-emmc-som-v15.dtb \
+	imx6q-cubox-i-som-v15.dtb \
+	imx6q-dhcom-pdk2.dtb \
+	imx6q-display5.dtb \
+	imx6q-gw51xx.dtb \
+	imx6q-gw52xx.dtb \
+	imx6q-gw53xx.dtb \
+	imx6q-gw54xx.dtb \
+	imx6q-gw551x.dtb \
+	imx6q-gw552x.dtb \
+	imx6q-gw553x.dtb \
+	imx6q-gw560x.dtb \
+	imx6q-gw5903.dtb \
+	imx6q-gw5904.dtb \
+	imx6q-gw5907.dtb \
+	imx6q-gw5910.dtb \
+	imx6q-gw5912.dtb \
+	imx6q-gw5913.dtb \
+	imx6q-hummingboard2.dtb \
+	imx6q-hummingboard2-emmc-som-v15.dtb \
+	imx6q-hummingboard2-som-v15.dtb \
+	imx6q-hummingboard.dtb \
+	imx6q-hummingboard-emmc-som-v15.dtb \
+	imx6q-hummingboard-som-v15.dtb \
+	imx6q-icore.dtb \
+	imx6q-icore-mipi.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6q-kp.dtb \
+	imx6q-logicpd.dtb \
+	imx6q-marsboard.dtb \
+	imx6q-mba6a.dtb \
+	imx6q-mba6b.dtb \
+	imx6q-mccmon6.dtb\
+	imx6q-nitrogen6x.dtb \
+	imx6q-novena.dtb \
+	imx6q-pico.dtb \
+	imx6q-phytec-mira-rdk-nand.dtb \
+	imx6q-udoo.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb \
+	imx6q-tbs2910.dtb \
+	imx6q-wandboard-revd1.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb \
+	imx6qp-wandboard-revd1.dtb \
+
+endif
+
+dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
+
+dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb
+
+dtb-$(CONFIG_MX6SX) += \
+	imx6sx-sabreauto.dtb \
+	imx6sx-sdb.dtb \
+	imx6sx-softing-vining-2000.dtb \
+	imx6sx-udoo-neo-basic.dtb \
+	imx6sx-udoo-neo-extended.dtb \
+	imx6sx-udoo-neo-full.dtb
+
+dtb-$(CONFIG_MX6UL) += \
+	imx6ul-geam.dtb \
+	imx6ul-isiot-emmc.dtb \
+	imx6ul-isiot-nand.dtb \
+	imx6ul-opos6uldev.dtb \
+	imx6ul-14x14-evk.dtb \
+	imx6ul-9x9-evk.dtb \
+	imx6ul-9x9-evk.dtb \
+	imx6ul-liteboard.dtb \
+	imx6ul-phytec-segin-ff-rdk-nand.dtb \
+	imx6ul-pico-hobbit.dtb \
+	imx6ul-pico-pi.dtb
+
+dtb-$(CONFIG_MX6ULL) += \
+	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri.dtb \
+	imx6ull-myir-mys-6ulx-eval.dtb \
+	imx6ull-seeed-npi-imx6ull-dev-board.dtb \
+	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ull-dart-6ul.dtb \
+	imx6ull-somlabs-visionsom.dtb \
+	imx6ulz-14x14-evk.dtb
+
+dtb-$(CONFIG_ARCH_MX6) += \
+	imx6-apalis.dtb \
+	imx6-colibri.dtb
+
+dtb-$(CONFIG_O4_IMX_NANO) += \
+	o4-imx-nano.dtb
+
+dtb-$(CONFIG_EV_IMX280_NANO_X_MB) += \
+	ev-imx280-nano-x-mb.dtb
+
+dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \
+	imx7d-sdb-qspi.dtb \
+	imx7-cm.dtb \
+	imx7-colibri-emmc.dtb \
+	imx7-colibri-rawnand.dtb \
+	imx7s-warp.dtb \
+	imx7d-meerkat96.dtb \
+	imx7d-pico-pi.dtb \
+	imx7d-pico-hobbit.dtb \
+	imx7d-smegw01.dtb
+
+dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \
+	imx7ulp-evk.dtb
+
+dtb-$(CONFIG_ARCH_IMX8) += \
+	fsl-imx8qm-apalis.dtb \
+	fsl-imx8qm-mek.dtb \
+	imx8qm-cgtqmx8.dtb \
+	imx8qm-rom7720-a1.dtb \
+	fsl-imx8qxp-ai_ml.dtb \
+	fsl-imx8qxp-colibri.dtb \
+	fsl-imx8qxp-apalis.dtb \
+	fsl-imx8qxp-mek.dtb \
+	imx8-deneb.dtb \
+	imx8-giedi.dtb
+
+dtb-$(CONFIG_ARCH_IMX8M) += \
+	imx8mm-evk.dtb \
+	imx8mm-icore-mx8mm-ctouch2.dtb \
+	imx8mm-icore-mx8mm-edimm2.2.dtb \
+	imx8mm-venice.dtb \
+	imx8mm-venice-gw71xx-0x.dtb \
+	imx8mm-venice-gw72xx-0x.dtb \
+	imx8mm-venice-gw73xx-0x.dtb \
+	imx8mm-verdin.dtb \
+	phycore-imx8mm.dtb \
+	imx8mn-ddr4-evk.dtb \
+	imx8mq-cm.dtb \
+	imx8mn-evk.dtb \
+	imx8mq-evk.dtb \
+	imx8mm-beacon-kit.dtb \
+	imx8mn-beacon-kit.dtb \
+	imx8mq-phanbell.dtb \
+	imx8mp-evk.dtb \
+	imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mq-pico-pi.dtb
+
+dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
+	imxrt1020-evk.dtb
+
+dtb-$(CONFIG_RCAR_GEN2) += \
+	r8a7790-lager-u-boot.dtb \
+	r8a7790-stout-u-boot.dtb \
+	r8a7791-koelsch-u-boot.dtb \
+	r8a7791-porter-u-boot.dtb \
+	r8a7792-blanche-u-boot.dtb \
+	r8a7793-gose-u-boot.dtb \
+	r8a7794-alt-u-boot.dtb \
+	r8a7794-silk-u-boot.dtb
+
+dtb-$(CONFIG_RCAR_GEN3) += \
+	r8a774a1-beacon-rzg2m-kit.dtb \
+	r8a774b1-beacon-rzg2n-kit.dtb \
+	r8a774e1-beacon-rzg2h-kit.dtb \
+	r8a774a1-hihope-rzg2m-u-boot.dtb \
+	r8a774b1-hihope-rzg2n-u-boot.dtb \
+	r8a774c0-ek874-u-boot.dtb \
+	r8a774e1-hihope-rzg2h-u-boot.dtb \
+	r8a77950-ulcb-u-boot.dtb \
+	r8a77950-salvator-x-u-boot.dtb \
+	r8a77960-ulcb-u-boot.dtb \
+	r8a77960-salvator-x-u-boot.dtb \
+	r8a77965-ulcb-u-boot.dtb \
+	r8a77965-salvator-x-u-boot.dtb \
+	r8a77970-eagle-u-boot.dtb \
+	r8a77980-condor-u-boot.dtb \
+	r8a77990-ebisu-u-boot.dtb \
+	r8a77995-draak-u-boot.dtb
+
+ifdef CONFIG_RCAR_GEN3
+DTC_FLAGS += -R 4 -p 0x1000
+endif
+
+dtb-$(CONFIG_RZA1) += \
+	r7s72100-gr-peach-u-boot.dtb
+
+dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
+	keystone-k2l-evm.dtb \
+	keystone-k2e-evm.dtb \
+	keystone-k2g-evm.dtb \
+	keystone-k2g-generic.dtb \
+	keystone-k2g-ice.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9261EK) += at91sam9261ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9261) += at91sam9261ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9263) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_MEESC) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9RLEK) += at91sam9rlek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
+	at91sam9260ek.dtb	\
+	at91sam9g20ek.dtb	\
+	at91sam9g20ek_2mmc.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9G45) += at91sam9m10g45ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
+	at91sam9g15ek.dtb	\
+	at91sam9g25ek.dtb	\
+	at91sam9g35ek.dtb	\
+	at91sam9x25ek.dtb	\
+	at91sam9x35ek.dtb
+
+dtb-$(CONFIG_TARGET_SAM9X60EK) += sam9x60ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb
+
+dtb-$(CONFIG_TARGET_GARDENA_SMART_GATEWAY_AT91SAM) += \
+	at91sam9g25-gardena-smart-gateway.dtb
+
+dtb-$(CONFIG_TARGET_ETHERNUT5) += ethernut5.dtb
+
+dtb-$(CONFIG_TARGET_USB_A9263) += usb_a9263.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
+	logicpd-som-lv-35xx-devkit.dtb \
+	logicpd-som-lv-37xx-devkit.dtb \
+	logicpd-torpedo-35xx-devkit.dtb \
+	logicpd-torpedo-37xx-devkit.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
+	omap3-evm-37xx.dtb \
+	omap3-evm.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \
+	omap3-beagle-xm-ab.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-beagle.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \
+	omap3-igep0020.dtb
+
+dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \
+	omap4-panda.dtb \
+	omap4-panda-es.dtb
+
+dtb-$(CONFIG_TARGET_OMAP4_SDP4430) += \
+	omap4-sdp.dtb \
+	omap4-sdp-es23plus.dtb
+
+dtb-$(CONFIG_TARGET_OMAP5_UEVM) += \
+	omap5-uevm.dtb
+
+dtb-$(CONFIG_TARGET_SAMA7G5EK) += \
+	sama7g5ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \
+	at91-sama5d2_ptc_ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
+	at91-sama5d2_xplained.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \
+	at91-sama5d27_som1_ek.dtb   \
+	at91-sama5d27_giantboard.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D27_WLSOM1_EK) += \
+	at91-sama5d27_wlsom1_ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_ICP) += \
+	at91-sama5d2_icp.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
+	at91-sama5d3_xplained.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
+	at91-sama5d4ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
+	at91-sama5d4_xplained.dtb
+
+dtb-$(CONFIG_TARGET_VINCO) += \
+	at91-vinco.dtb
+
+dtb-$(CONFIG_ARCH_BCM283X) += \
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-b.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
+	bcm2835-rpi-zero.dtb \
+	bcm2835-rpi-zero-w.dtb\
+	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-a-plus.dtb \
+	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb
+
+dtb-$(CONFIG_ARCH_BCM63158) += \
+	bcm963158.dtb
+
+dtb-$(CONFIG_ARCH_BCM68360) += \
+	bcm968360bg.dtb
+
+dtb-$(CONFIG_ARCH_BCM6858) += \
+	bcm968580xref.dtb
+
+dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
+
+dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
+dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
+
+dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
+
+dtb-$(CONFIG_STM32MP15x) += \
+	stm32mp157a-dk1.dtb \
+	stm32mp157a-avenger96.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
+	stm32mp157c-dk2.dtb \
+	stm32mp157c-ed1.dtb \
+	stm32mp157c-ev1.dtb \
+	stm32mp157c-odyssey.dtb \
+	stm32mp15xx-dhcom-drc02.dtb \
+	stm32mp15xx-dhcom-pdk2.dtb \
+	stm32mp15xx-dhcom-picoitx.dtb \
+	stm32mp15xx-dhcor-avenger96.dtb
+
+dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb k3-am654-r5-base-board.dtb
+dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
+			      k3-j721e-r5-common-proc-board.dtb \
+			      k3-j7200-common-proc-board.dtb \
+			      k3-j7200-r5-common-proc-board.dtb
+dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
+			      k3-am642-r5-evm.dtb \
+			      k3-am642-sk.dtb \
+			      k3-am642-r5-sk.dtb
+
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt7622-rfb.dtb \
+	mt7623a-unielec-u7623-02-emmc.dtb \
+	mt7622-bananapi-bpi-r64.dtb \
+	mt7623n-bananapi-bpi-r2.dtb \
+	mt7629-rfb.dtb \
+	mt8183-pumpkin.dtb \
+	mt8512-bm1-emmc.dtb \
+	mt8516-pumpkin.dtb \
+	mt8518-ap1-emmc.dtb
+
+dtb-$(CONFIG_TARGET_GE_BX50V3) += \
+	imx6q-bx50v3.dtb \
+	imx6q-b850v3.dtb \
+	imx6q-b650v3.dtb \
+	imx6q-b450v3.dtb
+
+dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb
+dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
+
+dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
+
+dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
+
+dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
+
+dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) += imx8mm-cl-iot-gate.dtb
+
+targets += $(dtb-y)
+
+# Add any required device tree compiler flags here
+DTC_FLAGS +=
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+	@:
+
+clean-files := *.dtb *.dtbo *_HS
diff --git a/roms/u-boot/arch/arm/dts/am335x-baltos.dts b/roms/u-boot/arch/arm/dts/am335x-baltos.dts
new file mode 100644
index 000000000..b3c13c9a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-baltos.dts
@@ -0,0 +1,449 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "OnRISC Baltos";
+	compatible = "vscom,onrisc", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat3.mmc0_dat3 */
+			0xf4 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat2.mmc0_dat2 */
+			0xf8 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat1.mmc0_dat1 */
+			0xfc (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_dat0.mmc0_dat0 */
+			0x100 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_clk.mmc0_clk */
+			0x104 (MUX_MODE0 | INPUT_EN | PULL_UP)	/* mmc0_cmd.mmc0_cmd */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x158 0x2a      /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
+			0x15c 0x2a      /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+		>;
+	};
+
+	tps65910_pins: pinmux_tps65910_pins {
+		pinctrl-single,pins = <
+			0x078 (PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
+		>;
+
+	};
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
+
+
+			/* Slave 2 */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	status = "okay";
+
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		ti,nand-xfer-type = "polled";
+
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		boot@0 {
+		       label = "SPL";
+		       reg = <0x0 0x20000>;
+		};
+		boot@20000{
+		       label = "SPL.backup1";
+		       reg = <0x20000 0x20000>;
+		};
+		boot@40000 {
+		       label = "SPL.backup2";
+		       reg = <0x40000 0x20000>;
+		};
+		boot@60000 {
+		       label = "SPL.backup3";
+		       reg = <0x60000 0x20000>;
+		};
+		boot@80000 {
+		       label = "u-boot";
+		       reg = <0x80000 0x1e0000>;
+		};
+		boot@260000 {
+		       label = "UBI";
+		       reg = <0x260000 0xfda0000>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <1000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps65910_pins>;
+	};
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	ti,en-ck32k-xtal = <1>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@7 {
+		reg = <7>;
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
+};
+
+&phy_sel {
+	rmii-clock-ext = <1>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc_reg>;
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-base0033.dts b/roms/u-boot/arch/arm/dts/am335x-base0033.dts
new file mode 100644
index 000000000..29782be07
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-base0033.dts
@@ -0,0 +1,95 @@
+/*
+ * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-igep0033.dtsi"
+
+/ {
+	model = "IGEP COM AM335x on AQUILA Expansion";
+	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_pins>;
+		pinctrl-1 = <&nxp_hdmi_off_pins>;
+		status = "okay";
+	};
+
+	leds_base {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_base_pins>;
+
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "base:red:user";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
+			default-state = "off";
+		};
+
+		led1 {
+			label = "base:green:user";
+			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+		>;
+	};
+	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+		>;
+	};
+
+	leds_base_pins: pinmux_leds_base_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-bone-common.dtsi b/roms/u-boot/arch/arm/dts/am335x-bone-common.dtsi
new file mode 100644
index 000000000..5b8230e28
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-bone-common.dtsi
@@ -0,0 +1,400 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	baseboard_eeprom: baseboard_eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		baseboard_data: baseboard_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	cape_eeprom0: cape_eeprom0@54 {
+		compatible = "at,24c256";
+		reg = <0x54>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape0_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom1: cape_eeprom1@55 {
+		compatible = "at,24c256";
+		reg = <0x55>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape1_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom2: cape_eeprom2@56 {
+		compatible = "at,24c256";
+		reg = <0x56>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape2_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom3: cape_eeprom3@57 {
+		compatible = "at,24c256";
+		reg = <0x57>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape3_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+};
+
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "mii";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-bone.dts b/roms/u-boot/arch/arm/dts/am335x-bone.dts
new file mode 100644
index 000000000..6b8493720
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-bone.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo3_reg>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-boneblack.dts b/roms/u-boot/arch/arm/dts/am335x-boneblack.dts
new file mode 100644
index 000000000..27ebe4a65
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-boneblack.dts
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Black";
+	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+/ {
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+		status = "okay";
+	};
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-bonegreen.dts b/roms/u-boot/arch/arm/dts/am335x-bonegreen.dts
new file mode 100644
index 000000000..9c59da90f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-bonegreen.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Green";
+	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)	/* spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)	/* spi0_d0.uart2_txd */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-brppt1-mmc.dts b/roms/u-boot/arch/arm/dts/am335x-brppt1-mmc.dts
new file mode 100644
index 000000000..bd2f6c2e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-brppt1-mmc.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "BRPPT1 (MMC) Panel";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		version		= <0x0100>;
+		order-no	= "6PPT30 (MMC)";
+		hw-revision	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		serial-no	= "0";
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x1>;
+	};
+
+	aliases {
+		ds1bkl0 = &pwmbacklight;
+		ds1bkl1 = &tps_bl;
+		ds1timing = &timing0;
+		ds1ctrl = &lcdc;
+		gpmc = &gpmc;
+		mmc = &mmc2;
+		fset = &fset;
+	};
+
+	chosen {
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	panel {
+		status = "disabled";
+
+		compatible = "ti,tilcdc,panel";
+		enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+
+		backlight = <&pwmbacklight>;
+		bkl-pwm = <&pwmbacklight>;
+		bkl-tps = <&tps_bl>;
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: lcd {
+				clock-frequency	= <32000000>;
+				hactive		= <800>;
+				vactive		= <480>;
+				hfront-porch	= <2>;
+				hback-porch	= <192>;
+				hsync-len	= <1>;
+				vfront-porch	= <20>;
+				vback-porch	= <2>;
+				vsync-len	= <1>;
+				hsync-active	= <1>;
+				vsync-active	= <1>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pwm0: omap-pwm@timer5 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer5>;
+		#pwm-cells = <3>;
+	};
+
+	pwm1: omap-pwm@timer6 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer6>;
+		#pwm-cells = <3>;
+	};
+
+	beeper: pwm-beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm0 0 0 0>;
+	};
+
+	pwmbacklight: pwm-bkl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+
+		default-brightness-level = <255>;
+		brightness-levels = <0 16 32 64 128 170 202 234 255>;
+
+		power-supply = <&vmmcsd_fixed>;
+		enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+
+		tps_bl: backlight {
+			compatible = "ti,tps65217-bl";
+			isel = <1>;	/* 1 - ISET1, 2 ISET2 */
+			fdim = <1000>;	/* TPS65217_BL_FDIM_1kHZ */
+			default-brightness = <50>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	dual_emac_res_vlan = <1>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	dual_emac_res_vlan = <2>;
+	phy-mode = "mii";
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&mmc2 {
+	u-boot,dm-spl;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x8>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&wdt2 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,zx-cutoff-ratio = <40>;
+		ti,min_deviation = <60>;
+		ti,max_deviation = <600>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+
+		bnr-buttons {
+			Home-Button {};
+		};
+	};
+
+	adc {
+		ti,adc-channels = <5 6 7>;
+	};
+};
+
+&timer6 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer7 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&wdt2 {
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&dcan0 {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "okay";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&aes {
+	status = "disabled";
+};
+
+&rng {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-brppt1-nand.dts b/roms/u-boot/arch/arm/dts/am335x-brppt1-nand.dts
new file mode 100644
index 000000000..67c609739
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-brppt1-nand.dts
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "BRPPT1 (NAND) Panel";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		version		= <0x0100>;
+		order-no	= "6PPT30 (NAND)";
+		hw-revision	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		serial-no	= "0";
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x1>;
+	};
+
+	aliases {
+		ds1bkl0 = &pwmbacklight;
+		ds1bkl1 = &tps_bl;
+		ds1timing = &timing0;
+		ds1ctrl = &lcdc;
+		gpmc = &gpmc;
+		mmc = &mmc2;
+		fset = &fset;
+	};
+
+	chosen {
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	panel {
+		status = "disabled";
+
+		compatible = "ti,tilcdc,panel";
+		enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+
+		backlight = <&pwmbacklight>;
+		bkl-pwm = <&pwmbacklight>;
+		bkl-tps = <&tps_bl>;
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: lcd {
+				clock-frequency	= <32000000>;
+				hactive		= <800>;
+				vactive		= <480>;
+				hfront-porch	= <2>;
+				hback-porch	= <192>;
+				hsync-len	= <1>;
+				vfront-porch	= <20>;
+				vback-porch	= <2>;
+				vsync-len	= <1>;
+				hsync-active	= <1>;
+				vsync-active	= <1>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pwm0: omap-pwm@timer5 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer5>;
+		#pwm-cells = <3>;
+	};
+
+	pwm1: omap-pwm@timer6 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer6>;
+		#pwm-cells = <3>;
+	};
+
+	beeper: pwm-beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm0 0 0 0>;
+	};
+
+	pwmbacklight: pwm-bkl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+
+		default-brightness-level = <255>;
+		brightness-levels = <0 16 32 64 128 170 202 234 255>;
+
+		power-supply = <&vmmcsd_fixed>;
+		enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+
+		tps_bl: backlight {
+			compatible = "ti,tps65217-bl";
+			isel = <1>;	/* 1 - ISET1, 2 ISET2 */
+			fdim = <1000>;	/* TPS65217_BL_FDIM_1kHZ */
+			default-brightness = <50>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	dual_emac;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	dual_emac_res_vlan = <1>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	dual_emac_res_vlan = <2>;
+	phy-mode = "mii";
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "disabled";
+};
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&wdt2 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,zx-cutoff-ratio = <40>;
+		ti,min_deviation = <60>;
+		ti,max_deviation = <600>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+
+		bnr-buttons {
+			Home-Button {};
+		};
+	};
+
+	adc {
+		ti,adc-channels = <5 6 7>;
+	};
+};
+
+&gpmc {
+	u-boot,dm-spl;
+	status = "okay";
+	pinctrl-names = "default";
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		rb-gpios = <&gpmc 1 GPIO_ACTIVE_HIGH>; /* gpmc_wait1 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wait-pin = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.MLO";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.cfgscr";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.dtb";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.u-boot-env";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.kernel";
+			reg = <0x00100000 0x00400000>;
+		};
+		partition@6 {
+			label = "NAND.rootfs";
+			reg = <0x00500000 0x08000000>;
+		};
+		partition@7 {
+			label = "NAND.user";
+			reg = <0x08500000 0x17b00000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-brppt1-spi.dts b/roms/u-boot/arch/arm/dts/am335x-brppt1-spi.dts
new file mode 100644
index 000000000..ce3dce204
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-brppt1-spi.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "BRPPT1 (MMC) Panel";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		version		= <0x0100>;
+		order-no	= "6PPT30 (SPI)";
+		hw-revision	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		serial-no	= "0";
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x1>;
+	};
+
+	aliases {
+		ds1bkl0 = &pwmbacklight;
+		ds1bkl1 = &tps_bl;
+		ds1timing = &timing0;
+		ds1ctrl = &lcdc;
+		gpmc = &gpmc;
+		mmc = &mmc2;
+		spi0 = &spi0;
+		fset = &fset;
+	};
+
+	chosen {
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	panel {
+		status = "disabled";
+
+		compatible = "ti,tilcdc,panel";
+		enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+
+		backlight = <&pwmbacklight>;
+		bkl-pwm = <&pwmbacklight>;
+		bkl-tps = <&tps_bl>;
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: lcd {
+				clock-frequency	= <32000000>;
+				hactive		= <800>;
+				vactive		= <480>;
+				hfront-porch	= <2>;
+				hback-porch	= <192>;
+				hsync-len	= <1>;
+				vfront-porch	= <20>;
+				vback-porch	= <2>;
+				vsync-len	= <1>;
+				hsync-active	= <1>;
+				vsync-active	= <1>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pwm0: omap-pwm@timer5 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer5>;
+		#pwm-cells = <3>;
+	};
+
+	pwm1: omap-pwm@timer6 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer6>;
+		#pwm-cells = <3>;
+	};
+
+	beeper: pwm-beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm0 0 0 0>;
+	};
+
+	pwmbacklight: pwm-bkl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+
+		default-brightness-level = <255>;
+		brightness-levels = <0 16 32 64 128 170 202 234 255>;
+
+		power-supply = <&vmmcsd_fixed>;
+		enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+
+		tps_bl: backlight {
+			compatible = "ti,tps65217-bl";
+			isel = <1>;	/* 1 - ISET1, 2 ISET2 */
+			fdim = <1000>;	/* TPS65217_BL_FDIM_1kHZ */
+			default-brightness = <50>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	u-boot,dm-spl;
+	status = "okay";
+
+	cs-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>,
+		   <&gpio0 6 GPIO_ACTIVE_HIGH>,
+		   <0>,
+		   <0>;
+
+	spi-max-frequency = <24000000>;
+
+	spi_flash: spiflash@0 {
+		u-boot,dm-spl;
+		u-boot,dm-pre-reloc;
+		compatible = "spidev", "jedec,spi-nor";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	dual_emac_res_vlan = <1>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	dual_emac_res_vlan = <2>;
+	phy-mode = "mii";
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&mmc2 {
+	u-boot,dm-spl;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x8>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&wdt2 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,zx-cutoff-ratio = <40>;
+		ti,min_deviation = <60>;
+		ti,max_deviation = <600>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+
+		bnr-buttons {
+			Home-Button {};
+		};
+	};
+
+	adc {
+		ti,adc-channels = <5 6 7>;
+	};
+};
+
+&timer6 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer7 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&wdt2 {
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&dcan0 {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "okay";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&aes {
+	status = "disabled";
+};
+
+&rng {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-brsmarc1.dts b/roms/u-boot/arch/arm/dts/am335x-brsmarc1.dts
new file mode 100644
index 000000000..25cdb1116
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-brsmarc1.dts
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "dt-bindings/thermal/thermal.h"
+
+/ {
+	model = "BRSMARC1 SoM";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "                                ";
+		order-no	= "                                ";
+		cpu-order-no	= "                                ";
+		hw-revision	= "                                ";
+		serial-no	= <0>;
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x0>;
+		hw-platform	= <0x7>;
+		fram-offset	= <0x100>;
+		fram-size	= <0x1F00>;
+		cache-disable	= <0x0>;
+		cpu-clock	= <0x0>;
+	};
+
+	chosen {
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		fset = &fset;
+		mmc = &mmc2;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		touch0 = &burtouch0;
+		screen0 = &lcdscreen0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcdscreen0: lcdscreen@0 {
+		/*backlight = <&tps_bl>; */
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+			rotation	= <0>;
+			pupdelay	= <0>;
+			pondelay	= <0>;
+			pwrpin		= <0x000000B1>;
+			brightdrv	= <0>;
+			brightfdim	= <100>;
+			brightdef	= <50>;
+		};
+
+		display-timings {
+			default {
+				clock-frequency	= <0>;
+				hactive		= <0>;
+				vactive		= <0>;
+				hfront-porch	= <0>;
+				hback-porch	= <0>;
+				hsync-len	= <0>;
+				vfront-porch	= <0>;
+				vback-porch	= <0>;
+				vsync-len	= <0>;
+				hsync-active	= <0>;
+				vsync-active	= <0>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+
+	board_thermal: board-thermal {
+		polling-delay-passive = <1000>; /* milliseconds */
+		polling-delay = <2500>; /* milliseconds */
+
+		thermal-sensors = <&cputemp>;
+
+		trips {
+			crit_trip: crit-trip {
+				temperature = <95000>; /* millicelsius */
+				hysteresis = <5000>; /* millicelsius */
+				type = "critical";
+			};
+		};
+		cooling-maps {
+			map0 {
+				trip = <&crit_trip>;
+				cooling-device =
+				<&resetc THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart2 {		/* X2X - P2P */
+	status = "okay";
+};
+
+&uart3 {		/* RS485 */
+	status = "okay";
+};
+
+&uart4 {		/* RS232 */
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+	};
+
+	cputemp: temperature-sensor@48 {	/* cpu temperature */
+		#thermal-sensor-cells = <0>;
+		compatible = "nxp,pct2075";
+		reg = <0x48>;
+	};
+
+	basetemp: temperature-sensor@49 {	/* baseboard temperature */
+		#thermal-sensor-cells = <0>;
+		compatible = "nxp,pct2075";
+		reg = <0x49>;
+	};
+	extrtc: rtc@51 {	/* realtime clock */
+		compatible = "epson,rx8571";
+		reg = <0x51>;
+	};
+
+	resetc: reset-controller@60 {
+		compatible = "bur,rststm";
+		reg = <0x60>;
+
+		cooling-min-state = <0>;
+		cooling-max-state = <1>;	/* reset gets fired */
+		#cooling-cells = <2>;		/* min followed by max */
+	};
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&spi0 {
+	u-boot,dm-spl;
+	status = "okay";
+
+	cs-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>,
+		   <&gpio0 6 GPIO_ACTIVE_HIGH>,
+		   <0>,
+		   <0>;
+
+	spi-max-frequency = <24000000>;
+
+	spi_flash: spiflash@0 {
+		u-boot,dm-spl;
+		u-boot,dm-pre-reloc;
+		compatible = "spidev", "spi-flash";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	u-boot,dm-spl;
+	status = "okay";
+	cs-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>,
+		   <&gpio0 19 GPIO_ACTIVE_HIGH>,
+		   <0>,
+		   <0>;
+
+	spi-max-frequency = <24000000>;
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	ti,ledcr = <0x0480>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	ti,ledcr = <0x0480>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x8>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+				ti,no-reset-on-init;
+				ti,no-idle-on-init;
+			};
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&timer1 {		/* today unused */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer2 {		/* used for vxworks primary timer device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer3 {		/* used sysdelay and hal tsc counter*/
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer4 {		/* used for PWM beeper */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer5 {		/* used for PWM backlight */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer6 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer7 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&wdt2 {
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	tsc {
+		burtouch0: burtouch@0 {
+			status = "okay";
+			compatible = "bur,DdVxSfTouchXXX";
+			bur,hwtree = "IF7";
+			bur,KX0 = <0x0>;
+			bur,KX1 = <0x0>;
+			bur,KX2 = <0x0>;
+			bur,KY0 = <0x0>;
+			bur,KY1 = <0x0>;
+			bur,KY2 = <0x0>;
+		};
+	};
+};
+
+&dcan0 {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "okay";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&aes {
+	status = "disabled";
+};
+
+&rng {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-brxre1.dts b/roms/u-boot/arch/arm/dts/am335x-brxre1.dts
new file mode 100644
index 000000000..485c8e361
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-brxre1.dts
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "BRXRE1 Panel";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "                                ";
+		order-no	= "                                ";
+		cpu-order-no	= "                                ";
+		hw-revision	= "                                ";
+		serial-no	= <0>;
+		device-id	= <0xE681>;
+		parent-id	= <0xE681>;
+		hw-variant	= <0x3>;
+		hw-platform	= <0x0>;
+		fram-offset	= <0x1000>;
+		fram-size	= <0x3000>;
+		cache-disable	= <0x0>;
+		cpu-clock	= <0x0>;
+	};
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+
+		framebuffer: framebuffer@8fbe0000 {
+			display = <&lcdscreen0>;
+			compatible = "simple-framebuffer";
+			status = "okay";
+			reg = <0x8fbef000 (1024 * 600 * 4)>;
+			width = <1024>;
+			height = <600>;
+			stride = <(1024 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&dpll_disp_m2_ck>, <&dpll_per_m2_ck>;
+		};
+	};
+
+	aliases {
+		fset = &fset;
+		mmc = &mmc2;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		touch0 = &burtouch0;
+		screen0 = &lcdscreen0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcdscreen0: lcdscreen@0 {
+		status = "okay";
+		compatible = "ti,tilcdc,panel";
+
+		backlight = <&tps_bl>;
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: lcd {
+				clock-frequency	= <9142857>;
+				hactive		= <480>;
+				vactive		= <272>;
+				hfront-porch	= <8>;
+				hback-porch	= <43>;
+				hsync-len	= <2>;
+				vfront-porch	= <4>;
+				vback-porch	= <2>;
+				vsync-len	= <10>;
+				hsync-active	= <1>;
+				vsync-active	= <1>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+
+		tps_bl: backlight {
+			compatible = "ti,tps65217-bl";
+			isel = <1>;	/* 1 - ISET1, 2 ISET2 */
+			fdim = <1000>;	/* TPS65217_BL_FDIM_1kHZ */
+			default-brightness = <50>;
+		};
+	};
+	resetc: rstpsc@75 { /* reset controller */
+		compatible = "bur,rstpsc";
+		reg = <0x75>;
+
+		cooling-min-state = <0>;
+		cooling-max-state = <1>;	/* reset gets fired */
+		#cooling-cells = <2>;		/* min followed by max */
+	};
+	rtc0: rv3029c2@56 {
+		status = "okay";
+		#thermal-sensor-cells = <0>;
+		compatible = "rv3029c2";
+		reg = <0x56>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "mii";
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&mmc2 {
+	u-boot,dm-pre-reloc;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x8>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+				ti,no-reset-on-init;
+				ti,no-idle-on-init;
+			};
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&timer1 {		/* today unused */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer2 {		/* used for vxworks primary timer device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer3 {		/* used sysdelay and hal tsc counter*/
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer4 {		/* used for PWM beeper */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer5 {		/* used for PWM backlight */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer6 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer7 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&wdt2 {
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	tsc {
+		burtouch0: burtouch@0 {
+			status = "okay";
+			compatible = "bur,DdVxSfTouchXXX";
+			bur,hwtree = "IF7";
+			bur,KX0 = <0x0>;
+			bur,KX1 = <0x0>;
+			bur,KX2 = <0x0>;
+			bur,KY0 = <0x0>;
+			bur,KY1 = <0x0>;
+			bur,KY2 = <0x0>;
+		};
+	};
+};
+
+&dcan0 {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "okay";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&aes {
+	status = "disabled";
+};
+
+&rng {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-chiliboard-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-chiliboard-u-boot.dtsi
new file mode 100644
index 000000000..06a13872e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-chiliboard-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2018 Grinn Sp. z o.o. -- http://www.grinn-global.com/
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-chiliboard.dts b/roms/u-boot/arch/arm/dts/am335x-chiliboard.dts
new file mode 100644
index 000000000..9c2a947aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-chiliboard.dts
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "am335x-chilisom.dtsi"
+
+/ {
+	model = "AM335x Chiliboard";
+	compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
+		     "ti,am33xx";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_gpio_pins>;
+
+		led0 {
+			label = "led0";
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	usb1_drvvbus: usb1_drvvbus {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+		>;
+	};
+
+	sd_pins: pinmux_sd_card {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	led_gpio_pins: led_gpio_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+			AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&ldo4_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+/* Ethernet */
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+/* USB */
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_drvvbus>;
+
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+/* microSD */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pins>;
+	vmmc-supply = <&ldo4_reg>;
+	bus-width = <0x4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&tps {
+	interrupt-parent = <&intc>;
+	interrupts = <7>; /* NNMI */
+
+	charger {
+		status = "okay";
+	};
+
+	pwrbutton {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-chilisom.dtsi b/roms/u-boot/arch/arm/dts/am335x-chilisom.dtsi
new file mode 100644
index 000000000..1b43ebd08
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-chilisom.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Grinn AM335x ChiliSOM";
+	compatible = "grinn,am335x-chilisom", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	nandflash_pins: nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3d";
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&rtc {
+	system-power-controller;
+
+	pinctrl-0 = <&ext_wakeup>;
+	pinctrl-names = "default";
+
+	ext_wakeup: ext-wakeup {
+		pins = "ext_wakeup0";
+		input-enable;
+	};
+};
+
+/* NAND Flash */
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-draco.dts b/roms/u-boot/arch/arm/dts/am335x-draco.dts
new file mode 100644
index 000000000..f8faa8f7c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-draco.dts
@@ -0,0 +1,152 @@
+/*
+ * Support for Siemens DRACO board
+ *
+ * Copyright (C) 2014 - Lukas Stockmann <lukas.stockmann@siemens.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-draco.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Siemens DRACO";
+	compatible = "siemens,draco", "ti,am33xx";
+
+	/* ethernet alias is needed for the MAC address passing from U-Boot */
+	aliases {
+		ethernet0 = &cpsw_emac0;
+		mdio-gpio0 = &mdio0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button0 {
+			label = "button0";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>; /* button0 */
+		};
+		button1 {
+			label = "button1";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>; /* button1 */
+		};
+	};
+
+	ocp {
+		debugss: debugss@4b000000 {
+			compatible = "ti,debugss";
+			ti,hwmods = "debugss";
+			reg = <0x4b000000 1000000>;
+			status = "disabled";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_mux_pins>;
+
+	gpio_mux_pins: gpio_mux_pins {
+		pinctrl-single,pins = <
+			0x1d0 (PIN_INPUT | MUX_MODE0)	/* tms jtag */
+			0x1d4 (PIN_INPUT | MUX_MODE0)	/* tdi jtag */
+			0x1d8 (PIN_OUTPUT | MUX_MODE0)	/* tdo jtag */
+			0x1dc (PIN_INPUT | MUX_MODE0)	/* tck jtag */
+			0x1e0 (PIN_INPUT | MUX_MODE0)	/* trstn jtag */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			0x0E8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_plck FIX STO should be a OUTPUT driven high*/
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			0x114 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.mii1_txen */
+			0x124 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.mii1_txd1 */
+			0x128 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.mii1_txd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.mii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.mii1_rxd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	gpio_mdio_default: gpio_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO via GPIO */
+			0x148 (PIN_INPUT | MUX_MODE7)	/* mdio_data.mdio_data GPIO0_0 */
+			0x14c (PIN_OUTPUT | MUX_MODE7)	/* mdio_clk.mdio_clk GPIO0_1 */
+		>;
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	slaves = <1>;			/* use only one emac if */
+
+	mdio0: gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_mdio_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH	/* MDIO-CLK */
+			 &gpio0 0 GPIO_ACTIVE_HIGH>;	/* MDIO-DATA */
+
+		phy0: ethernet-phy@1 {
+			reg = <0>;
+		};
+	};
+};
+
+/* Disable davinci/am335x mdio interface on this platform */
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "disabled";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-draco.dtsi b/roms/u-boot/arch/arm/dts/am335x-draco.dtsi
new file mode 100644
index 000000000..2c125fcec
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-draco.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Common support for Siemens Draco SOM (AM335x based)
+ *
+ * Copyright (C) 2013,2014 - Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>; /* 128 MB */
+	};
+
+	ocp {
+
+		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
+			status = "okay";
+			clock-frequency = <400000>;
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+				pagesize = <64>;
+			};
+		};
+
+		musb: usb@47400000 {
+			status = "okay";
+
+			control@44e10620 {
+				status = "okay";
+			};
+
+			usb-phy@47401300 {
+				status = "okay";
+			};
+
+			usb-phy@47401b00 {
+				status = "okay";
+			};
+
+			usb@47401000 {
+				status = "okay";
+			};
+
+			usb@47401800 {
+				status = "okay";
+				dr_mode = "host";
+			};
+
+			dma-controller@47402000  {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		nandflash_pins: nandflash_pins {
+			pinctrl-single,pins = <
+				0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+	};
+
+
+&timer3 {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+	};
+};
+
+/* disable the RTC node as its not accessible on the draco/dxr2 board */
+&rtc {
+	status = "disabled";
+	ti,hwmods = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-evm-u-boot.dtsi
new file mode 100644
index 000000000..4cf5f9928
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-evm-u-boot.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+			};
+		};
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-evm.dts b/roms/u-boot/arch/arm/dts/am335x-evm.dts
new file mode 100644
index 000000000..07288fb18
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-evm.dts
@@ -0,0 +1,764 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x EVM";
+	compatible = "ti,am335x-evm", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* WLAN_EN GPIO for this board - Bank1, pin16 */
+		gpio = <&gpio1 16 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
+			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
+			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
+
+		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
+			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
+
+		linux,keymap = <0x0000008b	/* MENU */
+				0x0100009e	/* BACK */
+				0x02000069	/* LEFT */
+				0x0001006a	/* RIGHT */
+				0x0101001c	/* ENTER */
+				0x0201006c>;	/* DOWN */
+	};
+
+	gpio_keys: volume_keys@0 {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch@9 {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+
+		switch@10 {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			800x480p62 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVM";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <12000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
+
+	matrix_keypad_s0: matrix_keypad_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	volume_keys_s0: volume_keys_s0 {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+			0x4C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+			0x8C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			0x19C (PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
+			0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+	am335x_evm_audio_pins: am335x_evm_audio_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tsl2550: tsl2550@39 {
+		compatible = "taos,tsl2550";
+		reg = <0x39>;
+	};
+
+	tmp275: tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+	nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000C0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001C0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001E0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00A00000 0x0F600000>;
+		};
+	};
+};
+
+#include "tps65910.dtsi"
+
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&am335x_evm_audio_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
+};
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	slaves = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+	/* these are on the crossbar and are outlined in the
+	   xbar-event-map element */
+	dmas = <&edma 12 0
+		&edma 13 0>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wlan_pins>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&edma {
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
+					    2 13>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "disabled";	/* Enable only if Profile 1 is selected */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins_default>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-evmsk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-evmsk-u-boot.dtsi
new file mode 100644
index 000000000..1003f4d31
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-evmsk-u-boot.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * am335x-evmsk U-Boot Additions
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-evmsk.dts b/roms/u-boot/arch/arm/dts/am335x-evmsk.dts
new file mode 100644
index 000000000..c94c33b59
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-evmsk.dts
@@ -0,0 +1,726 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x EVM-SK";
+	compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	wl12xx_vmmc: fixedregulator@2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 29 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "evmsk:green:usr0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "evmsk:green:usr1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "evmsk:green:mmc0";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "evmsk:green:heartbeat";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio_buttons: gpio_buttons@0 {
+		compatible = "gpio-keys";
+
+		switch@1 {
+			label = "button0";
+			linux,code = <0x100>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		switch@2 {
+			label = "button1";
+			linux,code = <0x101>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		switch@3 {
+			label = "button2";
+			linux,code = <0x102>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+
+		switch@4 {
+			label = "button3";
+			linux,code = <0x103>;
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 58 61 66 75 90 125 170 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVMSK";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+		status = "okay";
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			480x272 {
+				hactive         = <480>;
+				vactive         = <272>;
+				hback-porch     = <43>;
+				hfront-porch    = <8>;
+				hsync-len       = <4>;
+				vback-porch     = <12>;
+				vfront-porch    = <4>;
+				vsync-len       = <10>;
+				clock-frequency = <9000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+	lcd_pins_sleep: lcd_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+		>;
+	};
+
+	gpio_keys_s0: gpio_keys_s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	ecap2_pins: backlight_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x99c, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+
+			/* Slave 2 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&epwmss2 {
+	status = "okay";
+
+	ecap2: ecap@100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	ti,non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+};
+
+&lcdc {
+      status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-guardian-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-guardian-u-boot.dtsi
new file mode 100644
index 000000000..986f58e66
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-guardian-u-boot.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 EETS GmbH - https://www.eets.ch/
+ * Copyright (C) 2018 Robert Bosch Power Tools GmbH
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+/ {
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&l4_wkup {
+	u-boot,dm-pre-reloc;
+};
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+			};
+		};
+	};
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&scm {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&usb {
+	u-boot,dm-pre-reloc;
+};
+
+&usb_ctrl_mod {
+	u-boot,dm-pre-reloc;
+};
+
+&usb0 {
+	u-boot,dm-pre-reloc;
+};
+
+&usb0_phy {
+	u-boot,dm-pre-reloc;
+};
+
+&am33xx_pinmux {
+	u-boot,dm-pre-reloc;
+
+	lcd0_pins: pinmux_lcd0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP   | MUX_MODE7)
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-guardian.dts b/roms/u-boot/arch/arm/dts/am335x-guardian.dts
new file mode 100644
index 000000000..7e70a96d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-guardian.dts
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018 Robert Bosch Power Tools GmbH
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Bosch AM335x Guardian";
+	compatible = "bosch,am335x-guardian", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&guardian_button_pins>;
+
+		select-button {
+			label = "guardian-select-button";
+			linux,code = <KEY_5>;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		power-button {
+			label = "guardian-power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&guardian_led_pins>;
+
+		life-led {
+			label = "guardian:life-led";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		display-timings {
+			320x240 {
+				hactive         = <320>;
+				vactive         = <240>;
+				hback-porch     = <68>;
+				hfront-porch    = <20>;
+				hsync-len       = <1>;
+				vback-porch     = <18>;
+				vfront-porch    = <4>;
+				vsync-len       = <1>;
+				clock-frequency = <9000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <24>;
+			bus-width         = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+	};
+
+	pwm7: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dmtimer7_pins>;
+	};
+
+	vmmcsd_fixed: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;  /* CS0: 16MB for NAND */
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <15>;
+		gpmc,oe-on-ns = <1>;
+		gpmc,oe-off-ns = <15>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		/*
+		 * MTD partition table
+		 *
+		 * All SPL-* partitions are sized to minimal length which can
+		 * be independently programmable. For NAND flash this is equal
+		 * to size of erase-block.
+		 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0x0 0x40000>;
+		};
+
+		partition@1 {
+			label = "SPL.backup1";
+			reg = <0x40000  0x40000>;
+		};
+
+		partition@2 {
+			label = "SPL.backup2";
+			reg = <0x80000  0x40000>;
+		};
+
+		partition@3 {
+			label = "SPL.backup3";
+			reg = <0xc0000  0x40000>;
+		};
+
+		partition@4 {
+			label = "u-boot";
+			reg = <0x100000 0x100000>;
+		};
+
+		partition@5 {
+			label = "u-boot.backup1";
+			reg = <0x200000 0x100000>;
+		};
+
+		partition@6 {
+			label = "u-boot-2";
+			reg = <0x300000 0x100000>;
+		};
+
+		partition@7 {
+			label = "u-boot-2.backup1";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@8 {
+			label = "u-boot-env";
+			reg = <0x500000 0x40000>;
+		};
+
+		partition@9 {
+			label = "u-boot-env.backup1";
+			reg = <0x540000 0x40000>;
+		};
+
+		partition@10 {
+			label = "splash-screen";
+			reg = <0x580000 0x40000>;
+		};
+
+		partition@11 {
+			label = "UBI";
+			reg = <0x5c0000 0x1fa40000>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+&lcdc {
+	blue-and-red-wiring = "crossed";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+	system-power-controller;
+};
+
+&spi0 {
+	ti,pindir-d0-out-d1-in;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	ti,pmic-shutdown-controller;
+	interrupt-parent = <&intc>;
+	interrupts = <7>; /* NMI */
+
+	backlight {
+		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+		default-brightness = <100>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+
+	dmtimer7_pins: pinmux_dmtimer7_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
+		>;
+	};
+
+	guardian_button_pins: pinmux_gpio_keys_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7)
+		>;
+	};
+
+	guardian_interface_pins: pinmux_guardian_interface_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x928, PIN_OUTPUT          | MUX_MODE7)
+			AM33XX_IOPAD(0x990, PIN_OUTPUT          | MUX_MODE7)
+			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x980, PIN_INPUT           | MUX_MODE7)
+			AM33XX_IOPAD(0x984, PIN_INPUT           | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP   | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT           | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	lcd_disen_pins: pinmux_lcd_disen_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins_default: pinmux_lcd_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: pinmux_lcd_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	guardian_led_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-icev2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-icev2-u-boot.dtsi
new file mode 100644
index 000000000..67bfac916
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-icev2-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+/ {
+	xtal25mhz: xtal25mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&i2c0 {
+	cdce913: cdce913@65 {
+		compatible = "ti,cdce913";
+		reg = <0x65>;
+		clocks = <&xtal25mhz>;
+		#clock-cells = <1>;
+		xtal-load-pf = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-icev2.dts b/roms/u-boot/arch/arm/dts/am335x-icev2.dts
new file mode 100644
index 000000000..2a1b3a53e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-icev2.dts
@@ -0,0 +1,488 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x ICE V2 board
+ * http://www.ti.com/tool/tmdsice3359
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "TI AM3359 ICE-V2";
+	compatible = "ti,am3359-icev2", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart3;
+		tick-timer = &timer2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	leds@0 {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	/* Tricolor status LEDs */
+	leds@1 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		led@0 {
+			label = "status0:red:cpu0";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		led@1 {
+			label = "status0:green:usr";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "status0:yellow:usr";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "status1:red:mmc0";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		led@4 {
+			label = "status1:green:usr";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "status1:yellow:usr";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds: user_leds {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
+			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
+		>;
+	};
+
+	mmc0_pins_default: mmc0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
+		>;
+	};
+
+	spi0_pins_default: spi0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1, RMII mode */
+			AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0))	/* rmii1_refclk.rmii1_refclk */
+			AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txen.rmii1_txen */
+			/* Slave 2, RMII mode */
+			AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_wait0.rmii2_crs_dv */
+			AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_col.rmii2_refclk */
+			AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_a11.rmii2_rxd0 */
+			AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_a10.rmii2_rxd1 */
+			AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_wpn.rmii2_rxerr */
+			AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a5.rmii2_txd0 */
+			AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a4.rmii2_txd1 */
+			AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a0.rmii2_txen */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+
+			/* Slave 2 reset value */
+			AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0))	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0))			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_default>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: power-controller@2d {
+		reg = <0x2d>;
+	};
+
+	tpic2810: gpio@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1326000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+};
+
+&gpio0 {
+	/* Do not idle the GPIO used for holding the VTT regulator */
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+
+	p7 {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FET_SWITCH_CTRL";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+	status = "okay";
+};
+
+&gpio3 {
+	p4 {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PR1_MII_CTRL";
+	};
+
+	p10 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "MUX_MII_CTRL";
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	dual_emac;
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_default>;
+
+	sn65hvs882@1 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q64", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "u-boot";
+			reg = <0x80000 0x100000>;
+			read-only;
+		};
+
+		partition@2 {
+			label = "u-boot-env";
+			reg = <0x180000 0x20000>;
+			read-only;
+		};
+
+		partition@3 {
+			label = "misc";
+			reg = <0x1A0000 0x660000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-igep0033.dtsi b/roms/u-boot/arch/arm/dts/am335x-igep0033.dtsi
new file mode 100644
index 000000000..f102f6ada
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-igep0033.dtsi
@@ -0,0 +1,331 @@
+/*
+ * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "com:green:user";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vmmc: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+		>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+
+	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,elm-id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL";
+			reg = <0x00000000 0x000080000>;
+		};
+
+		partition@1 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@2 {
+			label = "U-Boot Env";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@4 {
+			label = "File System";
+			reg = <0x00780000 0x007880000>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/am335x-osd335x-common.dtsi b/roms/u-boot/arch/arm/dts/am335x-osd335x-common.dtsi
new file mode 100644
index 000000000..f8ff473f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-osd335x-common.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&cpu0_opp_table {
+	/*
+	* Octavo Systems:
+	* The EFUSE_SMA register is not programmed for any of the AM335x wafers
+	* we get and we are not programming them during our production test.
+	* Therefore, from a DEVICE_ID revision point of view, the silicon looks
+	* like it is Revision 2.1.  However, from an EFUSE_SMA point of view for
+	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
+	* EFUSE_SMA register reads as all zeros).
+	*/
+	oppnitro-1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux-i2c0-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C17) I2C0_SDA.I2C0_SDA */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C16) I2C0_SCL.I2C0_SCL */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	interrupts = <7>; /* NMI */
+	interrupt-parent = <&intc>;
+
+	ti,pmic-shutdown-controller;
+
+	pwrbutton {
+		interrupts = <2>;
+		status = "okay";
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-pdu001-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-pdu001-u-boot.dtsi
new file mode 100644
index 000000000..686a152fd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-pdu001-u-boot.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 EETS GmbH - https://www.eets.ch/
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+/ {
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&l4_wkup {
+	u-boot,dm-pre-reloc;
+};
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+			};
+		};
+	};
+};
+
+&scm {
+	u-boot,dm-pre-reloc;
+};
+
+&am33xx_pinmux {
+	u-boot,dm-pre-reloc;
+};
+
+&uart3_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&uart3 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc2 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc2_pins {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-pdu001.dts b/roms/u-boot/arch/arm/dts/am335x-pdu001.dts
new file mode 100644
index 000000000..ae43d61f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-pdu001.dts
@@ -0,0 +1,603 @@
+/*
+ * pdu001.dts
+ *
+ * EETS GmbH PDU001 board device tree file
+ *
+ * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:  GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+
+/ {
+	model = "EETS,PDU001";
+	compatible = "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			240x320p16 {
+				clock-frequency = <6500000>;
+				hactive = <240>;
+				vactive = <320>;
+				hfront-porch = <6>;
+				hback-porch = <6>;
+				hsync-len = <1>;
+				vback-porch = <6>;
+				vfront-porch = <6>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <1>;
+				de-active = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_clk.i2c2_sda */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d0.i2c2_scl */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3)		/* mcasp0_aclkx.spi1_sclk */
+			AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)		/* mcasp0_fsx.spi1_d0 */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcasp0_axr0.spi1_d1 */
+			AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3)		/* mcasp0_ahclkr.spi1_cs0 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1)	/* spi0_cs1.uart3_rxd */
+			AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* ecap0_in_pwm0_out.uart3_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Port 1 (emac0) */
+			AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0)		/* mii1_col.mii1_col */
+			AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0)		/* mii1_crs.mii1_crs */
+			AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0)		/* mii1_rxer.mii1_rxer */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0)		/* mii1_txen.mii1_txen */
+			AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0)		/* mii1_rxdv.mii1_rxdv */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0)		/* mii1_txd3.mii1_txd3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0)		/* mii1_txd2.mii1_txd2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0)		/* mii1_txd1.mii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0)		/* mii1_txd0.mii1_txd0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0)		/* mii1_txclk.mii1_txclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0)		/* mii1_rxclk.mii1_rxclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0)		/* mii1_rxd3.mii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0)		/* mii1_rxd2.mii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0)		/* mii1_rxd1.mii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0)		/* mii1_rxd0.mii1_rxd0 */
+
+			/* Port 2 (emac1) */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)		/* mii2_txen.gpmc_a0 */
+			AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1)		/* mii2_rxdv.gpmc_a1 */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)		/* mii2_txd3.gpmc_a2 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1)		/* mii2_txd2.gpmc_a3 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)		/* mii2_txd1.gpmc_a4 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)		/* mii2_txd0.gpmc_a5 */
+			AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1)		/* mii2_txclk.gpmc_a6 */
+			AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1)		/* mii2_rxclk.gpmc_a7 */
+			AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1)		/* mii2_rxd3.gpmc_a8 */
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1)		/* mii2_rxd2.gpmc_a9 */
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1)		/* mii2_rxd1.gpmc_a10 */
+			AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1)		/* mii2_rxd0.gpmc_a11 */
+			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1)		/* mii2_crs.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1)		/* mii2_rxer.gpmc_wpn */
+			AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1)		/* mii2_col.gpmc_ben1 */
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		/* eMMC */
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		/* SD cardcage */
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			/* card change signal for frontpanel SD cardcage */
+			AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7)		/* gpmc_advn_ale.gpio2_2 */
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+	dcan0_pins: pinmux_dcan0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <0 0>;
+	linux,rs485-enabled-at-boot-time;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	m2_eeprom: m2_eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	board_24aa025e48: board_24aa025e48@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	backplane_24aa025e48: backplane_24aa025e48@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+
+	pca9532: pca9532@60 {
+		compatible = "nxp,pca9532";
+		reg = <0x60>;
+		psc0 = <0x97>;
+		pwm0 = <0x80>;
+		psc1 = <0x97>;
+		pwm1 = <0x10>;
+
+		run.red@0 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		run.green@1 {
+			type = <PCA9532_TYPE_LED>;
+			default-state = "on";
+		};
+		s2.red@2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s2.green@3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s1.yellow@4 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s1.green@5 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+
+	pca9530: pca9530@61 {
+		compatible = "nxp,pca9530";
+		reg = <0x61>;
+
+		tft-panel@0 {
+			type = <PCA9532_TYPE_LED>;
+			linux,default-trigger = "backlight";
+			default-state = "on";
+		};
+	};
+
+	mcp79400: mcp79400@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	display-controller@0 {
+		compatible = "orisetech,otm3225a";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		// SPI mode 3
+		spi-cpol;
+		spi-cpha;
+		status = "okay";
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+/*
+ * Disable soc's rtc as we have no VBAT for it. This makes the board
+ * rtc (Microchip MCP79400) the default rtc device 'rtc0'.
+ */
+&rtc {
+	status = "disabled";
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-name = "ldo_vrtc";
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-name = "buck_vdd_ddr";
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits */
+			regulator-name = "buck_vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits */
+			regulator-name = "buck_vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-name = "boost_res";
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-name = "ldo_vdig1";
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-name = "ldo_vdig2";
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-name = "ldo_vpll";
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-name = "ldo_vdac";
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-name = "ldo_vaux1";
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-name = "ldo_vaux2";
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-name = "ldo_vaux33";
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-name = "ldo_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vbb_reg: regulator@13 {
+			regulator-name = "bat_vbb";
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	dual_emac;			/* no switch, two distinct MACs */
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x01 0x10 0x22 0x33>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	non-removable;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-phycore-som.dtsi b/roms/u-boot/arch/arm/dts/am335x-phycore-som.dtsi
new file mode 100644
index 000000000..8d7c19e5e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-phycore-som.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Phytec AM335x phyCORE";
+	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &rtc;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		vcc5v: fixedregulator0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+/* Crypto Module */
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet0_pins: pinmux_ethernet0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins>;
+	status = "okay";
+};
+
+/* I2C Busses */
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: pmic@2d {
+		reg = <0x2d>;
+	};
+
+	i2c_tmp102: temp@4b {
+		compatible = "ti,tmp102";
+		reg = <0x4b>;
+		status = "disabled";
+	};
+
+	i2c_eeprom: eeprom@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+		status = "disabled";
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* NAND memory */
+&am33xx_pinmux {
+		nandflash_pins: pinmux_nandflash {
+			pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
+	nandflash: nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <30>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		ti,elm-id = <&elm>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+/* Power */
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-name = "vdig1_1p8v";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* SPI Busses */
+&am33xx_pinmux {
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
+		>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	serial_flash: m25p80@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <48000000>;
+		reg = <0x0>;
+		m25p,fast-read;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-pocketbeagle.dts b/roms/u-boot/arch/arm/dts/am335x-pocketbeagle.dts
new file mode 100644
index 000000000..62fe5cab9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-pocketbeagle.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+
+/ {
+	model = "TI AM335x PocketBeagle";
+	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_leds_pins>;
+
+		compatible = "gpio-leds";
+
+		usr0 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		usr1 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		usr2 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		usr3 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
+		>;
+	};
+
+	ehrpwm0_pins: pinmux-ehrpwm0-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
+		>;
+	};
+
+	ehrpwm1_pins: pinmux-ehrpwm1-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
+		>;
+	};
+
+	mmc0_pins: pinmux-mmc0-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G16) mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G15) mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* (F18) mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* (F17) mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G18) mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G17) mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4)		/* (B12) mcasp0_aclkr.mmc0_sdwp */
+		>;
+	};
+
+	spi0_pins: pinmux-spi0-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0)	/* (A17) spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	/* (B17) spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* (B16) spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (A16) spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	spi1_pins: pinmux-spi1-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
+			AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
+		>;
+	};
+
+	usr_leds_pins: pinmux-usr-leds-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)		/* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)		/* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)		/* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)		/* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+		>;
+	};
+
+	uart0_pins: pinmux-uart0-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* (E15) uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* (E16) uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart4_pins: pinmux-uart4-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
+		>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ehrpwm0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm0_pins>;
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm1_pins>;
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+	system-power-controller;
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
+		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
+		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-pxm2.dtsi b/roms/u-boot/arch/arm/dts/am335x-pxm2.dtsi
new file mode 100644
index 000000000..645d22150
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-pxm2.dtsi
@@ -0,0 +1,545 @@
+/*
+ * Copyright (C) 2014 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Based on:
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	backlight0: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
+				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
+				     73 76 79 81 84 86 89 91 94 96 99 102 104
+				     107 109 112 114 117 119 122 124 127 130
+				     132 135 137 140 142 145 147 150 153 155
+				     158 160 163 165 168 170 173 175 178 181
+				     183 186 188 191 193 196 198 201 204 206
+				     209 211 214 216 219 221 224 226 229 232
+				     234 237 239 242 244 247 249 252 255>;
+		default-brightness-level = <80>;
+		power-supply = <&backlight_reg>;
+		enable-gpios = <&gpio3 16 0>;
+	};
+
+	backlight_reg: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_reg";
+		regulator-boot-on;
+	};
+
+	gpio_keys: restart-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		restart0 {
+			label = "restart";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_blue {
+			label = "blue";
+			gpios = <&gpio3 20 0>;
+		};
+		led_green {
+			label = "green";
+			gpios = <&gpio1 31 0>;
+		};
+		led_red {
+			label = "red";
+			gpios = <&gpio3 21 0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	reg_lcd_3v3: fixedregulator1 {
+		compatible = "regulator-gpio";
+                regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		startup-delay-us = <100>;
+		states = <1800000 0x1
+			  2900000 0x0>;
+		enable-at-boot;
+                gpios = <&gpio3 19 0>;
+                enable-active-high;
+        };
+
+	vbat: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vmmc: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-txid";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	status = "okay";
+
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tsl2563: tsl2563@49 {
+		compatible = "amstaos,tsl2563";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 2>;
+		wakeup-gpios = <&gpio1 25 0>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 0>;
+	wp-gpios = <&gpio3 18 0>;
+	status = "okay";
+};
+
+&phy_sel {
+	rgmii-no-delay;
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin &gpio_pin>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ecap0_pins: ecap_pins {
+		pinctrl-single,pins = <
+			0x198 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mcasp0_axr0.gpio3_16 Backlight enable */
+			0x164 (MUX_MODE0)	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+
+	gpio_pin: gpio_pin {
+		pinctrl-single,pins = <
+			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 touch reset */
+			0x60 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 touch irq */
+			0x64 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a9.gpio1_25 touch power */
+			0x6c (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 pad14 to DFU */
+			0x21c (MUX_MODE0)	/* usb0_drvvbus */
+			0x234 (MUX_MODE0)	/* usb1_drvvbus */
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE4)	/* mcasp0_aclkr.mmc0_sdwp */
+			0x160 (PIN_INPUT_PULLUP | MUX_MODE5)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)	/* spi0_sclk.i2c2_sda */
+			0x154 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)	/* spi0_cs0.i2c2_scl */
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			0x20 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			0x24 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			0x2c (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			0x30 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			0x34 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			0x38 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			0x3c (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			0xe0 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			0x194 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mcasp0_fsx.gpio3_15 LCD enable */
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+};
+
+&wdt2 {
+	wdt-keep-enabled;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-pxm50-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-pxm50-u-boot.dtsi
new file mode 100644
index 000000000..e5af9fdf8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-pxm50-u-boot.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * am335x-pxm50 U-Boot Additions
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-pxm50.dts b/roms/u-boot/arch/arm/dts/am335x-pxm50.dts
new file mode 100644
index 000000000..f4e66d29d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-pxm50.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am335x-pxm2.dtsi"
+
+/ {
+	model = "PXM2/PXM50";
+	compatible = "ti,am335x-evm", "ti,am33xx";
+
+		panel {
+			compatible = "ti,tilcdc,panel";
+			backlight = <&backlight0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_pins_s0>;
+			enable-gpios = <&gpio3 15 0>;
+			status = "okay";
+
+			panel-info {
+				ac-bias           = <255>;
+				ac-bias-intrpt    = <0>;
+				dma-burst-sz      = <16>;
+				bpp               = <32>;
+				fdd               = <0x80>;
+				sync-edge         = <0>;
+				sync-ctrl         = <1>;
+				raster-order      = <0>;
+				fifo-th           = <0>;
+				tft-alt-mode      = <0>;
+				invert-pxl-clk    = <0>;
+			};
+
+			display-timings {
+				native-mode = <&timing1>;
+
+				timing1: 1376x768p50 {
+					clock-frequency = <60000000>;
+					hactive = <1376>;
+					vactive = <768>;
+					hfront-porch = <14>;
+					hback-porch = <64>;
+					hsync-len = <56>;
+					vback-porch = <28>;
+					vfront-porch = <1>;
+					vsync-len = <6>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+				};
+			};
+		};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-regor-rdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-regor-rdk-u-boot.dtsi
new file mode 100644
index 000000000..4052d0ee2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-regor-rdk-u-boot.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+/ {
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-regor-rdk.dts b/roms/u-boot/arch/arm/dts/am335x-regor-rdk.dts
new file mode 100644
index 000000000..66a1360b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-regor-rdk.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-regor.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&serial_flash {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-regor.dtsi b/roms/u-boot/arch/arm/dts/am335x-regor.dtsi
new file mode 100644
index 000000000..86b3f0742
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-regor.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-REGOR";
+	compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	vcc3v3: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	/* User IO */
+	user_leds: user_leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_pins>;
+
+		run_stop-led {
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		error-led {
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+};
+
+/* User Leds */
+&am33xx_pinmux {
+	user_leds_pins: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8E0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.gpio2_22 */
+			AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
+		>;
+	};
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
+			AM33XX_IOPAD(0x96C, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_IOPAD(0x84C, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_IOPAD(0x85C, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1)	 /* gpmc_a9.mii2_rxd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_IOPAD(0x86C, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac = <1>;
+};
+
+/* GPIOs */
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_gpios_pins>;
+
+	user_gpios_pins: pinmux_user_gpios {
+		pinctrl-single,pins = <
+			/* DIGIN 1-4 */
+			AM33XX_IOPAD(0x82C, PIN_INPUT | MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
+			AM33XX_IOPAD(0x828, PIN_INPUT | MUX_MODE7)		/* gpmc_ad10.gpio0_26 */
+			AM33XX_IOPAD(0x824, PIN_INPUT | MUX_MODE7)		/* gpmc_ad9.gpio0_23 */
+			AM33XX_IOPAD(0x820, PIN_INPUT | MUX_MODE7)		/* gpmc_ad8.gpio0_22 */
+			/* DIGOUT 1-4 */
+			AM33XX_IOPAD(0x83C, PIN_OUTPUT | MUX_MODE7)		/* gpmc_ad15.gpio1_15 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE7)		/* gpmc_ad14.gpio1_14 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE7)		/* gpmc_ad13.gpio1_13 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE7)		/* gpmc_ad12.gpio1_12 */
+		>;
+	};
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8F0, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8F4, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8F8, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8FC, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* RTC */
+&i2c_rtc {
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x92C, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
+			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+/* RS485 - UART1 */
+&am33xx_pinmux {
+	uart1_rs485_pins: pinmux_uart1_rs485_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_rs485_pins>;
+	status = "okay";
+	linux,rs485-enabled-at-boot-time;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-rut-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-rut-u-boot.dtsi
new file mode 100644
index 000000000..a38c2dc60
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-rut-u-boot.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * am335x-rut U-Boot Additions
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+&l4_per {
+
+	segment@300000 {
+
+		target-module@e000 {
+			u-boot,dm-pre-reloc;
+
+			lcdc: lcdc@0 {
+				u-boot,dm-pre-reloc;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-rut.dts b/roms/u-boot/arch/arm/dts/am335x-rut.dts
new file mode 100644
index 000000000..cc06f5d23
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-rut.dts
@@ -0,0 +1,600 @@
+/*
+ * Copyright (C) 2014 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Based on:
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "RUT";
+	compatible = "ti,am335x-evm", "ti,am33xx";
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&ecap0 0 16000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	gpio_keys: powerfail-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pwr-fail0 {
+			label = "power-fail";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			gpio-key,wakeup;
+		};
+
+		pwr-fail1 {
+			label = "power-fail-redundant";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_green {
+			label = "rut:green:debug:run_mode";
+			gpios = <&gpio3 20 1>;
+			/* activelow = 1, default trigger heartbeat */
+		};
+		led_yellow {
+			label = "rut:debug:yellow:osc_ch1";
+			gpios = <&gpio0 17 1>;
+			/* activelow = 1, default trigger mmc0 */
+		};
+		led_red {
+			label = "rut:debug:red:osc_ch2";
+			gpios = <&gpio0 16 1>;
+			/* activelow = 1, default trigger debug_osc_ch2 */
+		};
+		/* optional */
+		led_alive {
+			label = "rut:alive";
+			gpios = <&gpio0 15 1>;
+			linux,default-trigger = "heartbeat";
+			/* activelow = 1, default trigger heartbeat */
+		};
+
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		status = "okay";
+
+		/* FORMIKE_KWH043ST20_F01 */
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+			tft-alt-mode      = <0>;
+			invert-pxl-clk    = <1>;
+		};
+
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: 480x800p60 {
+				clock-frequency = <29925000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <50>;
+				hback-porch = <50>;
+				hsync-len = <50>;
+				vback-porch = <50>;
+				vfront-porch = <50>;
+				vsync-len = <50>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	vmmc: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	watchdog {
+		compatible = "linux,wdt-gpio";
+		gpios = <&gpio0 14 0>;
+		hw_algo = "level";
+		hw_margin_ms = <30000>;
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethernet_phy>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+	gpios = <&gpio2 18 0>;
+
+        ethernet_phy: ethernet-phy@1 {
+                compatible = "ethernet-phy-id2000.5ce1";
+                reg = <1>;
+		natsemi,master_mode_fixup;
+        };
+};
+
+&elm {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&epwmss1_pins>;
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	status = "okay";
+
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <57>;
+		gpmc,cs-wr-off-ns = <57>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <57>;
+		gpmc,adv-wr-off-ns = <57>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <48>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <57>;
+		gpmc,access-ns = <38>;
+		gpmc,rd-cycle-ns = <67>;
+		gpmc,wr-cycle-ns = <67>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <96>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	atmel: atmel_mxt_ts@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 8>;
+		gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	temp@48 {
+		compatible = "st,ds75";
+		reg = <0x4c>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	status = "okay";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&sham {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <24000000>;
+
+		partition@0 {
+			label = "dummy";
+			reg = <0x0000000 0x8000>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	lcd_init: lcd@0 {
+		compatible = "formike,kwh043st20";
+		reg = <0>;
+		reset-gpios = <&gpio3 19 0>;
+		spi-max-frequency = <1200000>;
+		spi-cpol;
+		spi-cpha;
+		power-on-delay = <10>;
+		reset-delay = <10>;
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	backlight0: backlight {
+		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+		fdim = <1000>; /* TPS65217_BL_FDIM_100HZ */
+		default-brightness = <80>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "device";
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin &gpio_pin>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.mii1_rxerr */
+			0x114 (MUX_MODE1)	/* mii1_txen.mii1_txen */
+			0x124 (MUX_MODE1)	/* mii1_txd1.mii1_txd1 */
+			0x128 (MUX_MODE1)	/* mii1_txd0.mii1_txd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.mii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.mii1_rxd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ecap0_pins: ecap_pins {
+		pinctrl-single,pins = <
+			0x164 (MUX_MODE0)	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 buzzer frequency: ecap.0 */
+		>;
+	};
+
+	epwmss1_pins: epwmss_pins {
+		pinctrl-single,pins = <
+			0x48 (PIN_INPUT | MUX_MODE7)	/* gpmc_a2.gpio1_18 buzzer frequency: ehrpwm1A high-Z due to connected to ecap0 by R0469 */
+			0x4c (MUX_MODE6)	/* gpmc_a3.ehrpwm1B buzzer volume pwm */
+		>;
+	};
+
+	gpio_pin: gpio_pin {
+		pinctrl-single,pins = <
+			0x6c (PIN_INPUT | MUX_MODE7)		/* gpmc_a11.gpio1_27 PWR_FAIL_GPIO_SPARE */
+			0x78 (PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7)	/* gpmc_be1n.gpio1_28 TOUCH_CHANGE_N */
+			0x88 (PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7)		/* gpmc_csn3.gpio2_0 RUT_GPIO0_GPIO */
+			0x118 (PIN_INPUT | MUX_MODE7)		/* gmii1_rxdv.gpio3_4 PWR_FAIL_GPIO */
+			0x11c (MUX_MODE7)			/* mii1_txd3.gpio0_16 DEBUG_OSC_CH2_GPIO */
+			0x120 (MUX_MODE7)			/* mii1_txd2.gpio0_17 DEBUG_OSC_CH1_GPIO */
+			0x134 (MUX_MODE7)			/* gmii1_rxd3.gpio2_18 PHY_RSTn_GPIO */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gmii1_rxd2.gpio2_19 PHY_INT_GPIO */
+			0x180 (MUX_MODE7)			/* uart1_rxd.gpio0_14 WATCHDOG_TRIGGER_GPIO */
+			0x184 (MUX_MODE7)			/* uart1_txd.gpio0_15 ALIVE_LED_N_GPIO */
+			0x1a0 (MUX_MODE7)			/* mcasp0_aclkr.gpio3_18 MAXTOUCH_RESET_GPIO */
+			0x1a4 (MUX_MODE7)			/* mcasp0_fsr.gpio3_19 DISPLAY_RESET_GPIO */
+			0x1a8 (MUX_MODE7)			/* mcasp0_axr1.gpio3_20 DEBUG_RUN_MODE_GPIO */
+			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 NORFLASH_WP_GPIO */
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)		/* xdma_event_intr0.clkout1 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x168 (PIN_INPUT | MUX_MODE3)	/* uart0_ctsn.i2c1_sda */
+			0x16c (PIN_INPUT | MUX_MODE3)	/* uart0.rtsn.i2c1_scl */
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			0x20 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			0x24 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			0x2c (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			0x30 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			0x34 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			0x38 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			0x3c (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			0xe0 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+	mmc1_pins: mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_sclk.spi0_sclk */
+			0x154 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d0.spi0_d0 */
+			0x158 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d1.spi0_d1 */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_CS0.spi0_CS0 */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcasp0_aclkx.spi1_sclk */
+			0x194 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mcasp0_fsx.spi1_d0 */
+			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcasp0_axr0.spi1_d1 */
+			0x19c (PIN_INPUT_PULLUP | MUX_MODE3)	/* mcasp0_ahclkr.spi1_cs0 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-shc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-shc-u-boot.dtsi
new file mode 100644
index 000000000..359ae0520
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-shc-u-boot.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+/ {
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&l4_wkup {
+	u-boot,dm-pre-reloc;
+};
+
+&scm {
+	u-boot,dm-pre-reloc;
+};
+
+&am33xx_pinmux {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&emmc_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc2 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc3 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-shc.dts b/roms/u-boot/arch/arm/dts/am335x-shc.dts
new file mode 100644
index 000000000..a41a0606b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-shc.dts
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Bosch SHC";
+	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+	aliases {
+		mmcblk0 = &mmc1;
+		mmcblk1 = &mmc2;
+	};
+
+	cpus {
+		cpu@0 {
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				594000  1225000
+				294000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		back_button {
+			label = "Back Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+
+		front_button {
+			label = "Front Button";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_FRONT>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "shc:power:red";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "shc:power:bl";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		led3 {
+			label = "shc:lan:red";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "shc:lan:bl";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led5 {
+			label = "shc:cloud:red";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led6 {
+			label = "shc:cloud:bl";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+
+	ehrpwm1: pwm@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm1_pins>;
+		status = "okay";
+	};
+};
+
+&gpio1 {
+	hmtc_rst {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_reset";
+	};
+
+	hmtc_prog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_program";
+	};
+};
+
+&gpio3 {
+	zgb_rst {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "zigbee_reset";
+	};
+
+	zgb_boot {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "zigbee_boot";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "mii";
+	phy-handle = <&ethernetphy0>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	slaves = <1>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <0x4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	max-frequency = <26000000>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	bus-width = <4>;
+	cap-power-off-card;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	ti,no-init;
+};
+
+&sham {
+	status = "okay";
+};
+
+&tps {
+	compatible = "ti,tps65217";
+	ti,pmic-shutdown-controller;
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-name = "vdds_dpr";
+			regulator-compatible = "dcdc1";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			/*
+			 * VDD_MPU voltage limits 0.95V - 1.26V with
+			 * +/-4% tolerance
+			 */
+			regulator-compatible = "dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1375000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <70000>;
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			/*
+			 * VDD_CORE voltage limits 0.95V - 1.1V with
+			 * +/-4% tolerance
+			 */
+			regulator-name = "vdd_core";
+			regulator-compatible = "dcdc3";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-name = "vio,vrtc,vdds";
+			regulator-compatible = "ldo1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-name = "vdd_3v3aux";
+			regulator-compatible = "ldo2";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-name = "vdd_1v8";
+			regulator-compatible = "ldo3";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-name = "vdd_3v3a";
+			regulator-compatible = "ldo4";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
+		>;
+	};
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-sl50.dts b/roms/u-boot/arch/arm/dts/am335x-sl50.dts
new file mode 100644
index 000000000..ebb56bdaa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-sl50.dts
@@ -0,0 +1,550 @@
+/*
+ * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "Toby Churchill SL50 Series";
+	compatible = "tcl,am335x-sl50", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led0 {
+			label = "sl50:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "sl50:red:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "sl50:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "sl50:red:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	backlight0: disp0 {
+		compatible = "pwm-backlight";
+		pwms = <&ehrpwm1 0 500000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <6>;
+	};
+
+	backlight1: disp1 {
+		compatible = "pwm-backlight";
+		pwms = <&ehrpwm1 1 500000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* audio external oscillator */
+		tlv320aic3x_mclk: oscillator@0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <24576000>;	/* 24.576MHz */
+		};
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-SL50";
+		ti,audio-codec = <&audio_codec>;
+		ti,mcasp-controller = <&mcasp0>;
+
+		clocks = <&tlv320aic3x_mclk>;
+		clock-names = "mclk";
+
+		ti,audio-routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1R",               "Line In",
+			"LINE1L",		"Line In";
+	};
+
+	emmc_pwrseq: pwrseq@0 {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_pwrseq_pins>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lwb_pins>;
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* gpmc_wpn.uart4_txd */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
+		>;
+	};
+
+	emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) 	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	audio_pins: pinmux_audio_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2 */
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_MOSI - spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_MISO - spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CLK  - spi0_clk.spi0_clk */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */
+		>;
+	};
+
+	lwb_pins: pinmux_lwb_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)	/* SoundPA_en - mcasp0_fsr.gpio3_19 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)	/* nKbdOnC - gpmc_ad10.gpio0_26 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* nDispReset - gpmc_ad14.gpio1_14 */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
+			/* PDI Bus - Battery system */
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	bq32000: rtc@68 {
+		compatible = "ti,bq32000";
+		trickle-resistor-ohms = <1120>;
+		reg = <0x68>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	gpio_exp: mcp23017@20 {
+		compatible = "microchip,mcp23017";
+		reg = <0x20>;
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+
+	audio_codec: tlv320aic3106@1b {
+		status = "okay";
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+
+		AVDD-supply = <&ldo4_reg>;
+		IOVDD-supply = <&ldo4_reg>;
+		DRVDD-supply = <&ldo4_reg>;
+		DVDD-supply = <&ldo3_reg>;
+	};
+
+	/* Ambient Light Sensor */
+	als: isl29023@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+};
+
+&mcasp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+
+	op-mode = <0>;  /* MCASP_ISS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		2 0 1 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	flash: n25q032@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q032";
+		reg = <1>;
+		spi-max-frequency = <5000000>;
+	};
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	ti,pmic-shutdown-controller;
+
+	interrupt-parent = <&intc>;
+	interrupts = <7>;	/* NNMI */
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* VDDS_DDR */
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* VRTC / VIO / VDDS*/
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* VDD_3V3AUX */
+			regulator-always-on;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* VDD_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* VDD_3V3A */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "mii";
+	phy-handle = <&ethphy0>;
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <100>;   /* PHY datasheet states 100us min */
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm1_pins>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-wega-rdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am335x-wega-rdk-u-boot.dtsi
new file mode 100644
index 000000000..28fd62e23
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-wega-rdk-u-boot.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 DENX Software Engineering GmbH
+ */
+
+#include "am33xx-u-boot.dtsi"
+
+/ {
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-wega-rdk.dts b/roms/u-boot/arch/arm/dts/am335x-wega-rdk.dts
new file mode 100644
index 000000000..fe50f3041
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-wega-rdk.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-wega.dtsi"
+
+/* SoM */
+&i2c_eeprom {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/am335x-wega.dtsi b/roms/u-boot/arch/arm/dts/am335x-wega.dtsi
new file mode 100644
index 000000000..f3e045dfc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am335x-wega.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-WEGA";
+	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	sound: sound_iface {
+		compatible = "ti,da830-evm-audio";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		vcc3v3: fixedregulator1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+/* Audio */
+&am33xx_pinmux {
+	mcasp0_pins: pinmux_mcasp0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+		>;
+	};
+};
+
+&i2c0 {
+	tlv320aic3007: tlv320aic3007@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		AVDD-supply = <&vcc3v3>;
+		IOVDD-supply = <&vcc3v3>;
+		DRVDD-supply = <&vcc3v3>;
+		DVDD-supply = <&vdig1_reg>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
+	>;
+	tx-num-evt = <16>;
+	rt-num-evt = <16>;
+	status = "okay";
+};
+
+&sound {
+	ti,model = "AM335x-Wega";
+	ti,audio-codec = <&tlv320aic3007>;
+	ti,mcasp-controller = <&mcasp0>;
+	ti,audio-routing =
+		"Line Out",		"LLOUT",
+		"Line Out",		"RLOUT",
+		"LINE1L",		"Line In",
+		"LINE1R",		"Line In";
+	clocks = <&mcasp0_fck>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac = <1>;
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* Power */
+&vdig1_reg {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/* USB */
+&cppi41dma {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/am33xx-clocks.dtsi b/roms/u-boot/arch/arm/dts/am33xx-clocks.dtsi
new file mode 100644
index 000000000..922182439
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am33xx-clocks.dtsi
@@ -0,0 +1,679 @@
+/*
+ * Device Tree Source for AM33xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scm_clocks {
+	sys_clkin_ck: sys_clkin_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck@490 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0490>, <0x045c>, <0x0468>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck@480 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0480>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck@484 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0484>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x04d8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@488 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0488>, <0x0420>, <0x042c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck@494 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0494>, <0x0434>, <0x0440>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_disp_ck: dpll_disp_ck@498 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a4>;
+		ti,index-starts-at-one;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck@48c {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x048c>, <0x0470>, <0x049c>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@4ac {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x04ac>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk@530 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
+		reg = <0x0530>;
+	};
+
+	mmu_fck: mmu_fck@914 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0914>;
+	};
+
+	timer1_fck: timer1_fck@528 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
+		reg = <0x0528>;
+	};
+
+	timer2_fck: timer2_fck@508 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0508>;
+	};
+
+	timer3_fck: timer3_fck@50c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x050c>;
+	};
+
+	timer4_fck: timer4_fck@510 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0510>;
+	};
+
+	timer5_fck: timer5_fck@518 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0518>;
+	};
+
+	timer6_fck: timer6_fck@51c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x051c>;
+	};
+
+	timer7_fck: timer7_fck@504 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0504>;
+	};
+
+	usbotg_fck: usbotg_fck@47c {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x047c>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ieee5000_fck: ieee5000_fck@e4 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x00e4>;
+	};
+
+	wdt1_fck: wdt1_fck@538 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0538>;
+	};
+
+	l4_rtc_gclk: l4_rtc_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4fw_gclk: l4fw_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sysclk_div_ck: sysclk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
+		reg = <0x0520>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x053c>;
+	};
+
+	lcd_gclk: lcd_gclk@534 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x0534>;
+		ti,set-rate-parent;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x052c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck@52c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x052c>;
+		ti,max-div = <2>;
+	};
+
+	sysclkout_pre_ck: sysclkout_pre_ck@700 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		reg = <0x0700>;
+	};
+
+	clkout2_div_ck: clkout2_div_ck@700 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x0700>;
+	};
+
+	clkout2_ck: clkout2_ck@700 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout2_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0700>;
+	};
+};
+
+&prcm {
+	per_cm: per-cm@0 {
+		compatible = "ti,omap4-cm";
+		reg = <0x0 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x400>;
+
+		l4ls_clkctrl: l4ls-clkctrl@38 {
+			compatible = "ti,clkctrl";
+			reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l3s_clkctrl: l3s-clkctrl@1c {
+			compatible = "ti,clkctrl";
+			reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l3_clkctrl: l3-clkctrl@24 {
+			compatible = "ti,clkctrl";
+			reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
+			#clock-cells = <2>;
+		};
+
+		l4hs_clkctrl: l4hs-clkctrl@120 {
+			compatible = "ti,clkctrl";
+			reg = <0x120 0x4>;
+			#clock-cells = <2>;
+		};
+
+		pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 {
+			compatible = "ti,clkctrl";
+			reg = <0xe8 0x4>;
+			#clock-cells = <2>;
+		};
+
+		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x18>;
+			#clock-cells = <2>;
+		};
+
+		lcdc_clkctrl: lcdc-clkctrl@18 {
+			compatible = "ti,clkctrl";
+			reg = <0x18 0x4>;
+			#clock-cells = <2>;
+		};
+
+		clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c {
+			compatible = "ti,clkctrl";
+			reg = <0x14c 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	wkup_cm: wkup-cm@400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		l4_wkup_clkctrl: l4-wkup-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x10>, <0xb4 0x24>;
+			#clock-cells = <2>;
+		};
+
+		l3_aon_clkctrl: l3-aon-clkctrl@14 {
+			compatible = "ti,clkctrl";
+			reg = <0x14 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 {
+			compatible = "ti,clkctrl";
+			reg = <0xb0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	mpu_cm: mpu-cm@600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		mpu_clkctrl: mpu-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x8>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_rtc_cm: l4-rtc-cm@800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x800 0x100>;
+
+		l4_rtc_clkctrl: l4-rtc-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gfx_l3_cm: gfx-l3-cm@900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		gfx_l3_clkctrl: gfx-l3-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x8>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_cefuse_cm: l4-cefuse-cm@a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x24>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am33xx-l4.dtsi b/roms/u-boot/arch/arm/dts/am33xx-l4.dtsi
new file mode 100644
index 000000000..e67867331
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am33xx-l4.dtsi
@@ -0,0 +1,2026 @@
+&l4_wkup {						/* 0x44c00000 */
+	compatible = "ti,am33xx-l4-wkup", "simple-bus";
+	reg = <0x44c00000 0x800>,
+	      <0x44c00800 0x800>,
+	      <0x44c01000 0x400>,
+	      <0x44c01400 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x44c00000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x44d00000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x44e00000 0x100000>;	/* segment 2 */
+
+	segment@0 {					/* 0x44c00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>;	/* ap 3 */
+	};
+
+	segment@100000 {					/* 0x44d00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00100000 0x004000>,	/* ap 4 */
+			 <0x00004000 0x00104000 0x001000>,	/* ap 5 */
+			 <0x00080000 0x00180000 0x002000>,	/* ap 6 */
+			 <0x00082000 0x00182000 0x001000>;	/* ap 7 */
+
+		target-module@0 {			/* 0x44d00000, ap 4 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x4000>;
+			status = "disabled";
+		};
+
+		target-module@80000 {			/* 0x44d80000, ap 6 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x2000>;
+		};
+	};
+
+	segment@200000 {					/* 0x44e00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00200000 0x002000>,	/* ap 8 */
+			 <0x00002000 0x00202000 0x001000>,	/* ap 9 */
+			 <0x00003000 0x00203000 0x001000>,	/* ap 10 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 11 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 12 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 13 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 14 */
+			 <0x00008000 0x00208000 0x001000>,	/* ap 15 */
+			 <0x00009000 0x00209000 0x001000>,	/* ap 16 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 17 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 20 */
+			 <0x0000f000 0x0020f000 0x001000>,	/* ap 21 */
+			 <0x00010000 0x00210000 0x010000>,	/* ap 22 */
+			 <0x00020000 0x00220000 0x010000>,	/* ap 23 */
+			 <0x00030000 0x00230000 0x001000>,	/* ap 24 */
+			 <0x00031000 0x00231000 0x001000>,	/* ap 25 */
+			 <0x00032000 0x00232000 0x001000>,	/* ap 26 */
+			 <0x00033000 0x00233000 0x001000>,	/* ap 27 */
+			 <0x00034000 0x00234000 0x001000>,	/* ap 28 */
+			 <0x00035000 0x00235000 0x001000>,	/* ap 29 */
+			 <0x00036000 0x00236000 0x001000>,	/* ap 30 */
+			 <0x00037000 0x00237000 0x001000>,	/* ap 31 */
+			 <0x00038000 0x00238000 0x001000>,	/* ap 32 */
+			 <0x00039000 0x00239000 0x001000>,	/* ap 33 */
+			 <0x0003a000 0x0023a000 0x001000>,	/* ap 34 */
+			 <0x0003e000 0x0023e000 0x001000>,	/* ap 35 */
+			 <0x0003f000 0x0023f000 0x001000>,	/* ap 36 */
+			 <0x0000e000 0x0020e000 0x001000>,	/* ap 37 */
+			 <0x00040000 0x00240000 0x040000>,	/* ap 38 */
+			 <0x00080000 0x00280000 0x001000>;	/* ap 39 */
+
+		target-module@0 {			/* 0x44e00000, ap 8 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x2000>;
+
+			prcm: prcm@0 {
+				compatible = "ti,am3-prcm", "simple-bus";
+				reg = <0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@3000 {			/* 0x44e03000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+
+		target-module@5000 {			/* 0x44e05000, ap 12 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+		};
+
+		gpio0_target: target-module@7000 {	/* 0x44e07000, ap 14 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7000 0x4>,
+			      <0x7010 0x4>,
+			      <0x7114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>,
+				 <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7000 0x1000>;
+
+			gpio0: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0  82 8>,
+						<&am33xx_pinmux  8  52 4>,
+						<&am33xx_pinmux 12  94 4>,
+						<&am33xx_pinmux 16  71 2>,
+						<&am33xx_pinmux 18 135 1>,
+						<&am33xx_pinmux 19 108 2>,
+						<&am33xx_pinmux 21  73 1>,
+						<&am33xx_pinmux 22   8 2>,
+						<&am33xx_pinmux 26  10 2>,
+						<&am33xx_pinmux 28  74 1>,
+						<&am33xx_pinmux 29  81 1>,
+						<&am33xx_pinmux 30  28 2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <96>;
+			};
+		};
+
+		target-module@9000 {			/* 0x44e09000, ap 16 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9050 0x4>,
+			      <0x9054 0x4>,
+			      <0x9058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9000 0x1000>;
+
+			uart0: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <72>;
+				status = "disabled";
+				dmas = <&edma 26 0>, <&edma 27 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b000 {			/* 0x44e0b000, ap 18 48.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb000 0x8>,
+			      <0xb010 0x8>,
+			      <0xb090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb000 0x1000>;
+		};
+
+		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd000 0x4>,
+			      <0xd010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x0000d000 0x00001000>,
+				 <0x00001000 0x0000e000 0x00001000>;
+
+			tscadc: tscadc@0 {
+				compatible = "ti,am3359-tscadc";
+				reg = <0x0 0x1000>;
+				interrupts = <16>;
+				status = "disabled";
+				dmas = <&edma 53 0>, <&edma 57 0>;
+				dma-names = "fifo0", "fifo1";
+
+				tsc {
+					compatible = "ti,am3359-tsc";
+				};
+				am335x_adc: adc {
+					#io-channel-cells = <1>;
+					compatible = "ti,am3359-adc";
+				};
+			};
+
+		};
+
+		target-module@10000 {			/* 0x44e10000, ap 22 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x10000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00010000 0x00010000>,
+				 <0x00010000 0x00020000 0x00010000>;
+
+			scm: scm@0 {
+				compatible = "ti,am3-scm", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#pinctrl-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				am33xx_pinmux: pinmux@800 {
+					compatible = "pinctrl-single";
+					reg = <0x800 0x238>;
+					#pinctrl-cells = <2>;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x7f>;
+				};
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x800>;
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am3352-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am3352-wkup-m3-ipc";
+					reg = <0x1324 0x24>;
+					interrupts = <78>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		timer1_target: target-module@31000 {	/* 0x44e31000, ap 25 40.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x31000 0x4>,
+			      <0x31010 0x4>,
+			      <0x31014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x31000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,am335x-timer-1ms";
+				reg = <0x0 0x400>;
+				interrupts = <67>;
+				ti,timer-alwon;
+				clocks = <&timer1_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@33000 {			/* 0x44e33000, ap 27 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x33000 0x1000>;
+		};
+
+		target-module@35000 {			/* 0x44e35000, ap 29 50.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x35000 0x4>,
+			      <0x35010 0x4>,
+			      <0x35014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x35000 0x1000>;
+		};
+
+		target-module@37000 {			/* 0x44e37000, ap 31 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x37000 0x1000>;
+		};
+
+		target-module@39000 {			/* 0x44e39000, ap 33 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x39000 0x1000>;
+		};
+
+		target-module@3e000 {			/* 0x44e3e000, ap 35 60.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3e074 0x4>,
+			      <0x3e078 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+			clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			rtc: rtc@0 {
+				compatible = "ti,am3352-rtc", "ti,da830-rtc";
+				reg = <0x0 0x1000>;
+				interrupts = <75 76>;
+			};
+		};
+
+		target-module@40000 {			/* 0x44e40000, ap 38 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x40000>;
+		};
+	};
+};
+
+&l4_fw {						/* 0x47c00000 */
+	compatible = "ti,am33xx-l4-fw", "simple-bus";
+	reg = <0x47c00000 0x800>,
+	      <0x47c00800 0x800>,
+	      <0x47c01000 0x400>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x47c00000 0x1000000>;	/* segment 0 */
+
+	segment@0 {					/* 0x47c00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 3 */
+			 <0x0000d000 0x0000d000 0x001000>,	/* ap 4 */
+			 <0x0000e000 0x0000e000 0x001000>,	/* ap 5 */
+			 <0x0000f000 0x0000f000 0x001000>,	/* ap 6 */
+			 <0x00010000 0x00010000 0x001000>,	/* ap 7 */
+			 <0x00011000 0x00011000 0x001000>,	/* ap 8 */
+			 <0x0001a000 0x0001a000 0x001000>,	/* ap 9 */
+			 <0x0001b000 0x0001b000 0x001000>,	/* ap 10 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 11 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 12 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 14 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 15 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 16 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 17 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 18 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 19 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 20 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 21 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 22 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 23 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 24 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 25 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 26 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 27 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 28 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 29 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 30 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 31 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 32 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 33 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 34 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 35 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 36 */
+			 <0x00014000 0x00014000 0x001000>,	/* ap 37 */
+			 <0x00015000 0x00015000 0x001000>;	/* ap 38 */
+
+		target-module@c000 {			/* 0x47c0c000, ap 3 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@e000 {			/* 0x47c0e000, ap 5 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x47c10000, ap 7 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x47c14000, ap 37 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@1a000 {			/* 0x47c1a000, ap 9 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1a000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x47c24000, ap 11 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x47c26000, ap 13 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@28000 {			/* 0x47c28000, ap 29 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+		};
+
+		target-module@30000 {			/* 0x47c30000, ap 15 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+		};
+
+		target-module@32000 {			/* 0x47c32000, ap 31 06.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+		};
+
+		target-module@38000 {			/* 0x47c38000, ap 17 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>;
+		};
+
+		target-module@3a000 {			/* 0x47c3a000, ap 19 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>;
+		};
+
+		target-module@3c000 {			/* 0x47c3c000, ap 23 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>;
+		};
+
+		target-module@3e000 {			/* 0x47c3e000, ap 21 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+		};
+
+		target-module@40000 {			/* 0x47c40000, ap 24 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+		};
+
+		target-module@42000 {			/* 0x47c42000, ap 35 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+		};
+
+		target-module@44000 {			/* 0x47c44000, ap 27 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+		};
+
+		target-module@46000 {			/* 0x47c46000, ap 25 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+		};
+	};
+};
+
+&l4_fast {					/* 0x4a000000 */
+	compatible = "ti,am33xx-l4-fast", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x400>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x1000000>;	/* segment 0 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00100000 0x00100000 0x008000>,	/* ap 3 */
+			 <0x00108000 0x00108000 0x001000>,	/* ap 4 */
+			 <0x00180000 0x00180000 0x020000>,	/* ap 5 */
+			 <0x001a0000 0x001a0000 0x001000>,	/* ap 6 */
+			 <0x00200000 0x00200000 0x080000>,	/* ap 7 */
+			 <0x00280000 0x00280000 0x001000>,	/* ap 8 */
+			 <0x00300000 0x00300000 0x080000>,	/* ap 9 */
+			 <0x00380000 0x00380000 0x001000>;	/* ap 10 */
+
+		target-module@100000 {			/* 0x4a100000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x101200 0x4>,
+			      <0x101208 0x4>,
+			      <0x101204 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <0>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,syss-mask = <1>;
+			clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x8000>;
+		};
+
+		target-module@180000 {			/* 0x4a180000, ap 5 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x180000 0x20000>;
+		};
+
+		target-module@200000 {			/* 0x4a200000, ap 7 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x200000 0x80000>;
+		};
+
+		pruss_tm: target-module@300000 {	/* 0x4a300000, ap 9 04.0 */
+			compatible = "ti,sysc-pruss", "ti,sysc";
+			reg = <0x326000 0x4>,
+			      <0x326004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+					 SYSC_PRUSS_SUB_MWAIT)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_per 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x300000 0x80000>;
+			status = "disabled";
+		};
+	};
+};
+
+&l4_mpuss {						/* 0x4b140000 */
+	compatible = "ti,am33xx-l4-mpuss", "simple-bus";
+	reg = <0x4b144400 0x100>,
+	      <0x4b144800 0x400>;
+	reg-names = "la", "ap";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4b140000 0x008000>;	/* segment 0 */
+
+	segment@0 {					/* 0x4b140000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00004800 0x00004800 0x000400>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 2 */
+			 <0x00004000 0x00004000 0x000400>,	/* ap 3 */
+			 <0x00005000 0x00005000 0x000400>,	/* ap 4 */
+			 <0x00000000 0x00000000 0x001000>,	/* ap 5 */
+			 <0x00003000 0x00003000 0x001000>,	/* ap 6 */
+			 <0x00000800 0x00000800 0x000800>;	/* ap 7 */
+
+		target-module@0 {			/* 0x4b140000, ap 5 02.2 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x00001000>,
+				 <0x00001000 0x00001000 0x00001000>,
+				 <0x00002000 0x00002000 0x00001000>;
+		};
+
+		target-module@3000 {			/* 0x4b143000, ap 6 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+	};
+};
+
+&l4_per {						/* 0x48000000 */
+	compatible = "ti,am33xx-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x48100000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x48200000 0x100000>,	/* segment 2 */
+		 <0x00300000 0x48300000 0x100000>,	/* segment 3 */
+		 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+		 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 5 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 6 */
+			 <0x00009000 0x00009000 0x001000>,	/* ap 7 */
+			 <0x00016000 0x00016000 0x001000>,	/* ap 8 */
+			 <0x00017000 0x00017000 0x001000>,	/* ap 9 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 10 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 11 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 12 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 13 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 15 */
+			 <0x00038000 0x00038000 0x002000>,	/* ap 16 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 17 */
+			 <0x00014000 0x00014000 0x001000>,	/* ap 18 */
+			 <0x00015000 0x00015000 0x001000>,	/* ap 19 */
+			 <0x0003c000 0x0003c000 0x002000>,	/* ap 20 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 21 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 22 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 23 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 24 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 25 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 26 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 27 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 28 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 29 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 30 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 31 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 32 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 33 */
+			 <0x00050000 0x00050000 0x002000>,	/* ap 34 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 35 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 36 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 37 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 38 */
+			 <0x00090000 0x00090000 0x001000>,	/* ap 39 */
+			 <0x000a0000 0x000a0000 0x010000>,	/* ap 40 */
+			 <0x000b0000 0x000b0000 0x001000>,	/* ap 41 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 77 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 78 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 85 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 86 */
+			 <0x000c8000 0x000c8000 0x001000>,	/* ap 87 */
+			 <0x000c9000 0x000c9000 0x001000>,	/* ap 88 */
+			 <0x000cc000 0x000cc000 0x001000>,	/* ap 89 */
+			 <0x000cd000 0x000cd000 0x001000>,	/* ap 90 */
+			 <0x000ca000 0x000ca000 0x001000>,	/* ap 91 */
+			 <0x000cb000 0x000cb000 0x001000>,	/* ap 92 */
+			 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+			 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+		target-module@8000 {			/* 0x48008000, ap 6 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x48014000, ap 18 58.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x48016000, ap 8 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x48022000, ap 10 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22050 0x4>,
+			      <0x22054 0x4>,
+			      <0x22058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <73>;
+				status = "disabled";
+				dmas = <&edma 28 0>, <&edma 29 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@24000 {			/* 0x48024000, ap 12 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x24050 0x4>,
+			      <0x24054 0x4>,
+			      <0x24058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <74>;
+				status = "disabled";
+				dmas = <&edma 30 0>, <&edma 31 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@2a000 {			/* 0x4802a000, ap 14 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2a000 0x8>,
+			      <0x2a010 0x8>,
+			      <0x2a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+		};
+
+		target-module@30000 {			/* 0x48030000, ap 77 08.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x30000 0x4>,
+			      <0x30110 0x4>,
+			      <0x30114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+
+			spi0: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x400>;
+				interrupts = <65>;
+				ti,spi-num-cs = <2>;
+				dmas = <&edma 16 0
+					&edma 17 0
+					&edma 18 0
+					&edma 19 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+				status = "disabled";
+			};
+		};
+
+		target-module@38000 {			/* 0x48038000, ap 16 02.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x2000>,
+				 <0x46000000 0x46000000 0x400000>;
+
+			mcasp0: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46000000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <80>, <81>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 8 2>,
+					<&edma 9 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@3c000 {			/* 0x4803c000, ap 20 32.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x2000>,
+				 <0x46400000 0x46400000 0x400000>;
+
+			mcasp1: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46400000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <82>, <83>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 10 2>,
+					<&edma 11 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		timer2_target: target-module@40000 {	/* 0x48040000, ap 22 1e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40010 0x4>,
+			      <0x40014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <68>;
+				clocks = <&timer2_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@42000 {			/* 0x48042000, ap 24 1c.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42010 0x4>,
+			      <0x42014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <69>;
+			};
+		};
+
+		target-module@44000 {			/* 0x48044000, ap 26 26.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x44000 0x4>,
+			      <0x44010 0x4>,
+			      <0x44014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <92>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@46000 {			/* 0x48046000, ap 28 28.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x46000 0x4>,
+			      <0x46010 0x4>,
+			      <0x46014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <93>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@48000 {			/* 0x48048000, ap 30 22.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x48000 0x4>,
+			      <0x48010 0x4>,
+			      <0x48014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <94>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@4a000 {			/* 0x4804a000, ap 85 60.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x4a000 0x4>,
+			      <0x4a010 0x4>,
+			      <0x4a014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <95>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@4c000 {			/* 0x4804c000, ap 32 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>,
+			      <0x4c114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =   <&am33xx_pinmux  0  0  8>,
+						<&am33xx_pinmux  8 90  4>,
+						<&am33xx_pinmux 12 12 16>,
+						<&am33xx_pinmux 28 30  4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <98>;
+			};
+		};
+
+		target-module@50000 {			/* 0x48050000, ap 34 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x50000 0x2000>;
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 36 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x602fc 0x4>,
+			      <0x60110 0x4>,
+			      <0x60114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+		};
+
+		target-module@80000 {			/* 0x48080000, ap 38 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>,
+			      <0x80014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0x2000>;
+				interrupts = <4>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a0000 {			/* 0x480a0000, ap 40 5e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x10000>;
+		};
+
+		target-module@c8000 {			/* 0x480c8000, ap 87 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc8000 0x4>,
+			      <0xc8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <77>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <8>;
+				mbox_wkupm3: wkup_m3 {
+					ti,mbox-send-noirq;
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <0 0 3>;
+				};
+			};
+		};
+
+		target-module@ca000 {			/* 0x480ca000, ap 91 40.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xca000 0x4>,
+			      <0xca010 0x4>,
+			      <0xca014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xca000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+
+		target-module@cc000 {			/* 0x480cc000, ap 89 0e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xcc000 0x1000>;
+		};
+	};
+
+	segment@100000 {					/* 0x48100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0008c000 0x0018c000 0x001000>,	/* ap 42 */
+			 <0x0008d000 0x0018d000 0x001000>,	/* ap 43 */
+			 <0x0008e000 0x0018e000 0x001000>,	/* ap 44 */
+			 <0x0008f000 0x0018f000 0x001000>,	/* ap 45 */
+			 <0x0009c000 0x0019c000 0x001000>,	/* ap 46 */
+			 <0x0009d000 0x0019d000 0x001000>,	/* ap 47 */
+			 <0x000a6000 0x001a6000 0x001000>,	/* ap 48 */
+			 <0x000a7000 0x001a7000 0x001000>,	/* ap 49 */
+			 <0x000a8000 0x001a8000 0x001000>,	/* ap 50 */
+			 <0x000a9000 0x001a9000 0x001000>,	/* ap 51 */
+			 <0x000aa000 0x001aa000 0x001000>,	/* ap 52 */
+			 <0x000ab000 0x001ab000 0x001000>,	/* ap 53 */
+			 <0x000ac000 0x001ac000 0x001000>,	/* ap 54 */
+			 <0x000ad000 0x001ad000 0x001000>,	/* ap 55 */
+			 <0x000ae000 0x001ae000 0x001000>,	/* ap 56 */
+			 <0x000af000 0x001af000 0x001000>,	/* ap 57 */
+			 <0x000b0000 0x001b0000 0x010000>,	/* ap 58 */
+			 <0x000c0000 0x001c0000 0x001000>,	/* ap 59 */
+			 <0x000cc000 0x001cc000 0x002000>,	/* ap 60 */
+			 <0x000ce000 0x001ce000 0x002000>,	/* ap 61 */
+			 <0x000d0000 0x001d0000 0x002000>,	/* ap 62 */
+			 <0x000d2000 0x001d2000 0x002000>,	/* ap 63 */
+			 <0x000d8000 0x001d8000 0x001000>,	/* ap 64 */
+			 <0x000d9000 0x001d9000 0x001000>,	/* ap 65 */
+			 <0x000a0000 0x001a0000 0x001000>,	/* ap 79 */
+			 <0x000a1000 0x001a1000 0x001000>,	/* ap 80 */
+			 <0x000a2000 0x001a2000 0x001000>,	/* ap 81 */
+			 <0x000a3000 0x001a3000 0x001000>,	/* ap 82 */
+			 <0x000a4000 0x001a4000 0x001000>,	/* ap 83 */
+			 <0x000a5000 0x001a5000 0x001000>;	/* ap 84 */
+
+		target-module@8c000 {			/* 0x4818c000, ap 42 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8c000 0x1000>;
+		};
+
+		target-module@8e000 {			/* 0x4818e000, ap 44 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8e000 0x1000>;
+		};
+
+		target-module@9c000 {			/* 0x4819c000, ap 46 5a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9c000 0x8>,
+			      <0x9c010 0x8>,
+			      <0x9c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+		};
+
+		target-module@a0000 {			/* 0x481a0000, ap 79 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa0000 0x4>,
+			      <0xa0110 0x4>,
+			      <0xa0114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x1000>;
+
+			spi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x400>;
+				interrupts = <125>;
+				ti,spi-num-cs = <2>;
+				dmas = <&edma 42 0
+					&edma 43 0
+					&edma 44 0
+					&edma 45 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+				status = "disabled";
+			};
+		};
+
+		target-module@a2000 {			/* 0x481a2000, ap 81 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x481a4000, ap 83 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa4000 0x1000>;
+		};
+
+		target-module@a6000 {			/* 0x481a6000, ap 48 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa6050 0x4>,
+			      <0xa6054 0x4>,
+			      <0xa6058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa6000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <44>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a8000 {			/* 0x481a8000, ap 50 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa8050 0x4>,
+			      <0xa8054 0x4>,
+			      <0xa8058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <45>;
+				status = "disabled";
+			};
+		};
+
+		target-module@aa000 {			/* 0x481aa000, ap 52 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xaa050 0x4>,
+			      <0xaa054 0x4>,
+			      <0xaa058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xaa000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+		};
+
+		target-module@ac000 {			/* 0x481ac000, ap 54 38.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xac000 0x4>,
+			      <0xac010 0x4>,
+			      <0xac114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xac000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0 34 18>,
+						<&am33xx_pinmux 18 77  4>,
+						<&am33xx_pinmux 22 56 10>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		target-module@ae000 {			/* 0x481ae000, ap 56 3a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xae000 0x4>,
+			      <0xae010 0x4>,
+			      <0xae114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xae000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0  66 5>,
+						<&am33xx_pinmux  5  98 2>,
+						<&am33xx_pinmux  7  75 2>,
+						<&am33xx_pinmux 13 141 1>,
+						<&am33xx_pinmux 14 100 8>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <62>;
+			};
+		};
+
+		target-module@b0000 {			/* 0x481b0000, ap 58 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb0000 0x10000>;
+		};
+
+		target-module@cc000 {			/* 0x481cc000, ap 60 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
+				 <&dcan0_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xcc000 0x2000>;
+
+			dcan0: can@0 {
+				compatible = "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 0>;
+				interrupts = <52>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d0000 {			/* 0x481d0000, ap 62 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
+				 <&dcan1_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd0000 0x2000>;
+
+			dcan1: can@0 {
+				compatible = "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 1>;
+				interrupts = <55>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d8000 {			/* 0x481d8000, ap 64 66.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xd82fc 0x4>,
+			      <0xd8110 0x4>,
+			      <0xd8114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd8000 0x1000>;
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@300000 {					/* 0x48300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00300000 0x001000>,	/* ap 66 */
+			 <0x00001000 0x00301000 0x001000>,	/* ap 67 */
+			 <0x00002000 0x00302000 0x001000>,	/* ap 68 */
+			 <0x00003000 0x00303000 0x001000>,	/* ap 69 */
+			 <0x00004000 0x00304000 0x001000>,	/* ap 70 */
+			 <0x00005000 0x00305000 0x001000>,	/* ap 71 */
+			 <0x0000e000 0x0030e000 0x001000>,	/* ap 72 */
+			 <0x0000f000 0x0030f000 0x001000>,	/* ap 73 */
+			 <0x00018000 0x00318000 0x004000>,	/* ap 74 */
+			 <0x0001c000 0x0031c000 0x001000>,	/* ap 75 */
+			 <0x00010000 0x00310000 0x002000>,	/* ap 76 */
+			 <0x00012000 0x00312000 0x001000>,	/* ap 93 */
+			 <0x00015000 0x00315000 0x001000>,	/* ap 94 */
+			 <0x00016000 0x00316000 0x001000>,	/* ap 95 */
+			 <0x00017000 0x00317000 0x001000>,	/* ap 96 */
+			 <0x00013000 0x00313000 0x001000>,	/* ap 97 */
+			 <0x00014000 0x00314000 0x001000>,	/* ap 98 */
+			 <0x00020000 0x00320000 0x001000>,	/* ap 99 */
+			 <0x00021000 0x00321000 0x001000>,	/* ap 100 */
+			 <0x00022000 0x00322000 0x001000>,	/* ap 101 */
+			 <0x00023000 0x00323000 0x001000>,	/* ap 102 */
+			 <0x00024000 0x00324000 0x001000>,	/* ap 103 */
+			 <0x00025000 0x00325000 0x001000>;	/* ap 104 */
+
+		target-module@0 {			/* 0x48300000, ap 66 48.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			epwmss0: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap0: ecap@100 {
+					compatible = "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					interrupts = <31>;
+					interrupt-names = "ecap0";
+					status = "disabled";
+				};
+
+				ehrpwm0: pwm@200 {
+					compatible = "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@2000 {			/* 0x48302000, ap 68 52.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>,
+			      <0x2004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			epwmss1: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap1: ecap@100 {
+					compatible = "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					interrupts = <47>;
+					interrupt-names = "ecap1";
+					status = "disabled";
+				};
+
+				ehrpwm1: pwm@200 {
+					compatible = "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x48304000, ap 70 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			epwmss2: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap2: ecap@100 {
+					compatible = "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					interrupts = <61>;
+					interrupt-names = "ecap2";
+					status = "disabled";
+				};
+
+				ehrpwm2: pwm@200 {
+					compatible = "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@e000 {			/* 0x4830e000, ap 72 4a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xe000 0x4>,
+			      <0xe054 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, lcdc_clkdm */
+			clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+
+			lcdc: lcdc@0 {
+				compatible = "ti,am33xx-tilcdc";
+				reg = <0x0 0x1000>;
+				interrupts = <36>;
+				status = "disabled";
+			};
+		};
+
+		target-module@10000 {			/* 0x48310000, ap 76 4e.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x11fe0 0x4>,
+			      <0x11fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <111>;
+			};
+		};
+
+		target-module@13000 {			/* 0x48313000, ap 97 62.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x13000 0x1000>;
+		};
+
+		target-module@15000 {			/* 0x48315000, ap 94 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00015000 0x00001000>,
+				 <0x00001000 0x00016000 0x00001000>;
+		};
+
+		target-module@18000 {			/* 0x48318000, ap 74 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x4000>;
+		};
+
+		target-module@20000 {			/* 0x48320000, ap 99 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x48322000, ap 101 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x48324000, ap 103 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am33xx-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am33xx-u-boot.dtsi
new file mode 100644
index 000000000..61d10b841
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am33xx-u-boot.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 B&R Industrial Automation GmbH -
+ * https://www.br-automation.com/
+ */
+
+/ {
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&prcm_clocks {
+	compatible = "simple-bus";
+};
+
+&scm_clocks {
+	compatible = "simple-bus";
+};
diff --git a/roms/u-boot/arch/arm/dts/am33xx.dtsi b/roms/u-boot/arch/arm/dts/am33xx.dtsi
new file mode 100644
index 000000000..ce07cec84
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am33xx.dtsi
@@ -0,0 +1,721 @@
+/*
+ * Device Tree Source for AM33XX SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/clock/am3.h>
+
+/ {
+	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		d-can0 = &dcan0;
+		d-can1 = &dcan1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			enable-method = "ti,am3352";
+			device_type = "cpu";
+			reg = <0>;
+
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
+		};
+
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <90>;
+				min-residency-us = <300>;
+				ti,idle-wkup-m3;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		/*
+		 * The three following nodes are marked with opp-suspend
+		 * because the can not be enabled simultaneously on a
+		 * single SoC.
+		 */
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0x06 0x0010>;
+			opp-suspend;
+		};
+
+		opp100-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0x00FF>;
+			opp-suspend;
+		};
+
+		opp100-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0020>;
+			opp-suspend;
+		};
+
+		opp100-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0040>;
+		};
+
+		opp120-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		opp120-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x06 0x0080>;
+		};
+
+		oppturbo-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		oppturbo-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x06 0x0100>;
+		};
+
+		oppnitro-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0x04 0x0200>;
+		};
+	};
+
+	pmu@4b000000 {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+		reg = <0x4b000000 0x1000000>;
+		ti,hwmods = "debugss";
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+			pm-sram = <&pm_sram_code
+				   &pm_sram_data>;
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the AM33XX interconnect.
+	 * The real AM33XX interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		l4_wkup: l4_wkup@44c00000 {
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am3352-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000	0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+		};
+		l4_per: interconnect@48000000 {
+		};
+		l4_fw: interconnect@47c00000 {
+		};
+		l4_fast: interconnect@4a000000 {
+		};
+		l4_mpuss: interconnect@4b140000 {
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,am33xx-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <70>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			ti,needs-special-hs-handling;
+			dmas = <&edma_xbar 24 0 0
+				&edma_xbar 25 0 0>;
+			dma-names = "tx", "rx";
+			interrupts = <64>;
+			reg = <0x48060000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2 0
+				&edma 3 0>;
+			dma-names = "tx", "rx";
+			interrupts = <28>;
+			reg = <0x481d8000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <29>;
+			reg = <0x47810000 0x1000>;
+			status = "disabled";
+		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <91>;
+		};
+
+		usb: usb@47400000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47400000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+			status = "disabled";
+
+			usb_ctrl_mod: control@44e10620 {
+				compatible = "ti,am335x-usb-ctrl-module";
+				reg = <0x44e10620 0x10
+					0x44e10648 0x4>;
+				reg-names = "phy_ctrl", "wakeup";
+				status = "disabled";
+			};
+
+			usb0_phy: usb-phy@47401300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401300 0x100>;
+				reg-names = "phy";
+				status = "disabled";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
+			};
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401400 0x400
+					0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1_phy: usb-phy@47401b00 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401b00 0x100>;
+				reg-names = "phy";
+				status = "disabled";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@2000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x0000 0x1000>,
+				       <0x2000 0x1000>,
+				       <0x3000 0x1000>,
+				       <0x4000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+			};
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,am335x-cpsw","ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * c0_rx_thresh_pend
+			 * c0_rx_pend
+			 * c0_tx_pend
+			 * c0_misc_pend
+			 */
+			interrupts = <40 41 42 43>;
+			ranges;
+			syscon = <&scm_conf>;
+			status = "disabled";
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a101000 0x100>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@44e10650 {
+				compatible = "ti,am3352-cpsw-phy-sel";
+				reg= <0x44e10650 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
+		ocmcram: sram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x10000>; /* 64k */
+			ranges = <0x0 0x40300000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pm_sram_code: pm-code-sram@0 {
+				compatible = "ti,sram";
+				reg = <0x0 0x1000>;
+				protect-exec;
+			};
+
+			pm_sram_data: pm-data-sram@1000 {
+				compatible = "ti,sram";
+				reg = <0x1000 0x1000>;
+				pool;
+			};
+		};
+
+		emif: emif@4c000000 {
+			compatible = "ti,emif-am3352";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+			interrupts = <101>;
+			sram = <&pm_sram_code
+				&pm_sram_data>;
+			ti,no-idle;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			dmas = <&edma 52 0>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x200>;
+				interrupts = <109>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+			};
+		};
+
+		aes_target: target-module@53500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53500080 0x4>,
+			      <0x53500084 0x4>,
+			      <0x53500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53500000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <103>;
+				dmas = <&edma 6 0>,
+				       <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+	};
+};
+
+#include "am33xx-l4.dtsi"
+#include "am33xx-clocks.dtsi"
+
+&prcm {
+	prm_per: prm@c00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xc00 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_wkup: prm@d00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xd00 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_device: prm@f00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xf00 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_gfx: prm@1100 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1100 0x100>;
+		#reset-cells = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am3517-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am3517-evm-u-boot.dtsi
new file mode 100644
index 000000000..d5a4ce97d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am3517-evm-u-boot.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ serial0;
+		/delete-property/ serial1;
+	};
+
+	ocp@68000000 {
+		/delete-node/ bandgap@48002524;
+	};
+};
+
+&gpio1 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio2 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio3 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio5 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio6 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+/delete-node/ &uart1;
+/delete-node/ &uart2;
+/delete-node/ &mmc2;
+/delete-node/ &mmc3;
diff --git a/roms/u-boot/arch/arm/dts/am3517-evm-ui.dtsi b/roms/u-boot/arch/arm/dts/am3517-evm-ui.dtsi
new file mode 100644
index 000000000..e841918c1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am3517-evm-ui.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	codec1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_1>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	codec2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master2>;
+		simple-audio-card,frame-master = <&sound_master2>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp2>;
+		};
+
+		sound_master2: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_2>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	expander-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		record {
+			label = "Record";
+			/* linux,code = <BTN_0>; */
+			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+		};
+
+		play {
+			label = "Play";
+			linux,code = <KEY_PLAY>;
+			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+		};
+
+		Stop {
+			label = "Stop";
+			linux,code = <KEY_STOP>;
+			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+		};
+
+		fwd {
+			label = "FWD";
+			linux,code = <KEY_FASTFORWARD>;
+			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+		};
+
+		rwd {
+			label = "RWD";
+			linux,code = <KEY_REWIND>;
+			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+		};
+
+		shift {
+			label = "Shift";
+			linux,code = <KEY_LEFTSHIFT>;
+			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+		};
+
+		Mode {
+			label = "Mode";
+			linux,code = <BTN_MODE>;
+			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+		};
+
+		Menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+		};
+
+		Up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		Down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	/* Audio codecs */
+	tlv320aic23_1: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	tlv320aic23_2: codec@1b {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1b>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	/* Audio codecs */
+	tlv320aic23_3: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	/* GPIO Expanders */
+	tca6416_2: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	tca6416_3: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	/* TVP5146 Analog Video decoder input */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mcbsp1 {
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am3517-evm.dts b/roms/u-boot/arch/arm/dts/am3517-evm.dts
new file mode 100644
index 000000000..3527c0f2d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am3517-evm.dts
@@ -0,0 +1,339 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+        vmmc_fixed: vmmc {
+                compatible = "regulator-fixed";
+                regulator-name = "vmmc_fixed";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+        };
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		user_pb {
+			label = "User Push Button";
+			linux,code = <BTN_0>;
+			gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_1 {
+			label = "User Switch 1";
+			linux,code = <BTN_1>;
+			gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_2 {
+			label = "User Switch 2";
+			linux,code = <BTN_2>;
+			gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_3 {
+			label = "User Switch 3";
+			linux,code = <BTN_3>;
+			gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_4 {
+			label = "User Switch 4";
+			linux,code = <BTN_4>;
+			gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_5 {
+			label = "User Switch 5";
+			linux,code = <BTN_5>;
+			gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_6 {
+			label = "User Switch 6";
+			linux,code = <BTN_6>;
+			gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_7 {
+			label = "User Switch 7";
+			linux,code = <BTN_7>;
+			gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_8 {
+			label = "User Switch 8";
+			linux,code = <BTN_8>;
+			gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		user_led_1 {
+			label = "am3517evm:green:user_led_1";
+			gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led_2 {
+			label = "am3517evm:green:user_led_2";
+			gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led_3 {
+			label = "am3517evm:green:user_led_3";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0"; /* SD/MMC card activity */
+		};
+
+		user_led_4 {
+			label = "am3517evm:green:user_led_4";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lcd0: display@0 {
+		compatible = "panel-dpi";
+		label = "15";
+		status = "okay";
+		pinctrl-names = "default";
+		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
+		vcc-supply = <&vdd_io_reg>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <3>;
+			vfront-porch = <4>;
+			vsync-len = <11>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		power-supply = <&vdd_io_reg>;
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm11 0 5000000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
+	};
+
+	pwm11: dmtimer-pwm@11 {
+		compatible = "ti,omap-dmtimer-pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_pins>;
+		ti,timers = <&timer11>;
+		#pwm-cells = <3>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+		#phy-cells = <0>;
+	};
+};
+
+&davinci_emac {
+	     status = "okay";
+};
+
+&davinci_mdio {
+	     status = "okay";
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	vdds_dsi-supply = <&vdd_io_reg>;
+	vdda_video-supply = <&vdd_io_reg>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/* User DIP swithes [1:8] / User LEDS [1:2] */
+	tca6416: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc_fixed>;
+	bus-width = <4>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
+};
+
+&mmc3 {
+      status = "disabled";
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
+			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
+		>;
+	};
+
+	pwm_pins: pinmux_pwm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1)       /* mcspi2_cs0.gpt11_pwm */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4)       /* mcspi2_cs1.gpio_182 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4)       /* mcspi1_cs2.gpio_176 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
+		>;
+	};
+
+	hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)	/* etk_clk.hsusb1_stp */
+			OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)	/* etk_ctl.hsusb1_clk */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+			OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am3517-som.dtsi b/roms/u-boot/arch/arm/dts/am3517-som.dtsi
new file mode 100644
index 000000000..b1c988eed
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am3517-som.dtsi
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
+ *
+ * Based on am3517-evm.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_core_reg>;
+		};
+	};
+
+	wl12xx_buffer: wl12xx_buf {
+		compatible = "regulator-fixed";
+		regulator-name = "wl1271_buf";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_buffer_pins>;
+		gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
+		regulator-always-on;
+		vin-supply = <&vdd_1v8_reg>;
+	};
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_wkup_pins>;
+		gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&wl12xx_buffer>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		linux,mtd-name = "micron,mt29f4g16abchch";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	s35390a: s35390a@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_pins>;
+		interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
+	};
+
+	tps: tps65023@48 {
+		compatible = "ti,tps65023";
+		reg = <0x48>;
+
+		regulators {
+			vdd_core_reg: VDCDC1 {
+				regulator-name = "vdd_core";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vdd_io_reg: VDCDC2 {
+				regulator-name = "vdd_io";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_1v8_reg: VDCDC3 {
+				regulator-name = "vdd_1v8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vdd_usb18_reg: LDO1 {
+				regulator-name = "vdd_usb18";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vdd_usb33_reg: LDO2 {
+				regulator-name = "vdd_usb33";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	touchscreen: tsc2004@4b {
+		compatible = "ti,tsc2004";
+		reg = <0x4b>;
+
+		vio-supply = <&vdd_io_reg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mmc2 {
+	interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1271-st";
+		enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
+		max-speed = <3000000>;
+	};
+};
+
+&omap3_pmx_core {
+
+	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_clk.mmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_cmd.mmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat0.mmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat1.mmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat2.mmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat3.mmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
+	rtc_pins: pinmux_rtc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0)		/* gpio_56 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am3517-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am3517-u-boot.dtsi
new file mode 100644
index 000000000..374499dcb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am3517-u-boot.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+&uart4 {
+	reg-shift = <2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am3517.dtsi b/roms/u-boot/arch/arm/dts/am3517.dtsi
new file mode 100644
index 000000000..23ea381d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am3517.dtsi
@@ -0,0 +1,112 @@
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+		can = &hecc;
+	};
+
+	ocp@68000000 {
+		am35x_otg_hs: am35x_otg_hs@5c040000 {
+			compatible = "ti,omap3-musb";
+			ti,hwmods = "am35x_otg_hs";
+			status = "disabled";
+			reg = <0x5c040000 0x1000>;
+			interrupts = <71>;
+			interrupt-names = "mc";
+		};
+
+		davinci_emac: ethernet@5c000000 {
+			compatible = "ti,am3517-emac";
+			ti,hwmods = "davinci_emac";
+			status = "disabled";
+			reg = <0x5c000000 0x30000>;
+			interrupts = <67 68 69 70>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0x10000>;
+			ti,davinci-ctrl-mod-reg-offset = <0>;
+			ti,davinci-ctrl-ram-offset = <0x20000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			ti,davinci-rmii-en = /bits/ 8 <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			clocks = <&emac_ick>;
+			clock-names = "ick";
+		};
+
+		davinci_mdio: ethernet@5c030000 {
+			compatible = "ti,davinci_mdio";
+			ti,hwmods = "davinci_mdio";
+			status = "disabled";
+			reg = <0x5c030000 0x1000>;
+			bus_freq = <1000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&emac_fck>;
+			clock-names = "fck";
+		};
+
+		uart4: serial@4809e000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			status = "disabled";
+			reg = <0x4809e000 0x400>;
+			interrupts = <84>;
+			dmas = <&sdma 55 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+
+		omap3_pmx_core2: pinmux@480025d8 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025d8 0x24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		hecc: can@5c050000 {
+			compatible = "ti,am3517-hecc";
+			status = "disabled";
+			reg = <0x5c050000 0x80>,
+			      <0x5c053000 0x180>,
+			      <0x5c052000 0x200>;
+			reg-names = "hecc", "hecc-ram", "mbx";
+			interrupts = <24>;
+			clocks = <&hecc_ck>;
+		};
+	};
+};
+
+/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
+&usb_otg_hs {
+	status = "disabled";
+};
+
+&iva {
+	status = "disabled";
+};
+
+&mailbox {
+	status = "disabled";
+};
+
+&mmu_isp {
+	status = "disabled";
+};
+
+/include/ "am35xx-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/am35xx-clocks.dtsi b/roms/u-boot/arch/arm/dts/am35xx-clocks.dtsi
new file mode 100644
index 000000000..00dd1f091
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am35xx-clocks.dtsi
@@ -0,0 +1,128 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scm_clocks {
+	emac_ick: emac_ick@32c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x032c>;
+		ti,bit-shift = <1>;
+	};
+
+	emac_fck: emac_fck@32c {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&rmii_ck>;
+		reg = <0x032c>;
+		ti,bit-shift = <9>;
+	};
+
+	vpfe_ick: vpfe_ick@32c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x032c>;
+		ti,bit-shift = <2>;
+	};
+
+	vpfe_fck: vpfe_fck@32c {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pclk_ck>;
+		reg = <0x032c>;
+		ti,bit-shift = <10>;
+	};
+
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x032c>;
+		ti,bit-shift = <0>;
+	};
+
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x032c>;
+		ti,bit-shift = <8>;
+	};
+
+	hecc_ck: hecc_ck@32c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x032c>;
+		ti,bit-shift = <3>;
+	};
+};
+&cm_clocks {
+	ipss_ick: ipss_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	rmii_ck: rmii_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	pclk_ck: pclk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
+			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
+			 <&hecc_ck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am4372-generic-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am4372-generic-u-boot.dtsi
new file mode 100644
index 000000000..6ba5c1649
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am4372-generic-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "am4372-u-boot.dtsi"
+
+/{
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/am4372-generic.dts b/roms/u-boot/arch/arm/dts/am4372-generic.dts
new file mode 100644
index 000000000..b8a2bb82e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am4372-generic.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree Source for Generic AM4372 EVM
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+
+/ {
+	compatible = "ti,am4372", "ti,am43";
+	model = "Texas Instruments AM4372 Generic";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/am4372-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am4372-u-boot.dtsi
new file mode 100644
index 000000000..986ae1747
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am4372-u-boot.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/{
+	aliases {
+		usb0 = &usb1;
+		usb1 = &usb2;
+	};
+};
+
+&am43xx_control_usb2phy1 {
+	compatible = "ti,control-phy-usb2-am437", "syscon";
+};
+
+&am43xx_control_usb2phy2 {
+	compatible = "ti,control-phy-usb2-am437", "syscon";
+};
+
+&ocp2scp0 {
+	compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp", "simple-bus";
+};
+
+&ocp2scp1 {
+	compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp", "simple-bus";
+};
+
+&dwc3_1 {
+	u-boot,dm-spl;
+};
+
+&usb1 {
+	u-boot,dm-spl;
+};
+
+&usb2_phy1 {
+	u-boot,dm-spl;
+};
+
+&am43xx_control_usb2phy1 {
+	u-boot,dm-spl;
+};
+
+&ocp2scp0 {
+	u-boot,dm-spl;
+};
+
+&dwc3_2 {
+	u-boot,dm-spl;
+};
+
+&usb2 {
+	u-boot,dm-spl;
+};
+
+&usb2_phy2 {
+	u-boot,dm-spl;
+};
+
+&am43xx_control_usb2phy2 {
+	u-boot,dm-spl;
+};
+
+&ocp2scp1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/am4372.dtsi b/roms/u-boot/arch/arm/dts/am4372.dtsi
new file mode 100644
index 000000000..6f60a3299
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am4372.dtsi
@@ -0,0 +1,1009 @@
+/*
+ * Device Tree Source for AM4372 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,am4372", "ti,am43";
+	interrupt-parent = <&wakeupgen>;
+
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+		spi0 = &qspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48281000 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	ocp {
+		compatible = "ti,am4372-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+		reg = <0x44000000 0x400000
+		       0x44800000 0x400000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_wkup: l4_wkup@44c00000 {
+			compatible = "ti,am4-l4-wkup", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x44c00000 0x287000>;
+
+			prcm: prcm@1f0000 {
+				compatible = "ti,am4-prcm";
+				reg = <0x1f0000 0x11000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+
+			scm: scm@210000 {
+				compatible = "ti,am4-scm", "simple-bus";
+				reg = <0x210000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x210000 0x4000>;
+
+				am43xx_pinmux: pinmux@800 {
+					compatible = "ti,am437-padconf",
+						     "pinctrl-single";
+					reg = <0x800 0x31c>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0xffffffff>;
+				};
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		emif: emif@4c000000 {
+			compatible = "ti,emif-am4372";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@44e09000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x44e09000 0x2000>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+		};
+
+		uart1: serial@48022000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48022000 0x2000>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			status = "disabled";
+		};
+
+		uart2: serial@48024000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48024000 0x2000>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			status = "disabled";
+		};
+
+		uart3: serial@481a6000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a6000 0x2000>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			status = "disabled";
+		};
+
+		uart4: serial@481a8000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a8000 0x2000>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			status = "disabled";
+		};
+
+		uart5: serial@481aa000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481aa000 0x2000>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			status = "disabled";
+		};
+
+		mailbox: mailbox@480C8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480C8000 0x200>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <8>;
+			mbox_wkupm3: wkup_m3 {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <0 0 3>;
+			};
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+			reg = <0x44e31000 0x400>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-alwon;
+			ti,hwmods = "timer1";
+		};
+
+		timer2: timer@48040000  {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48040000  0x400>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+			status = "disabled";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer4";
+			status = "disabled";
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer5";
+			status = "disabled";
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer6";
+			status = "disabled";
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer7";
+			status = "disabled";
+		};
+
+		timer8: timer@481c1000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x481c1000 0x400>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			status = "disabled";
+		};
+
+		timer9: timer@4833d000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833d000 0x400>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+			status = "disabled";
+		};
+
+		timer10: timer@4833f000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833f000 0x400>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+			status = "disabled";
+		};
+
+		timer11: timer@48341000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48341000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			status = "disabled";
+		};
+
+		counter32k: counter@44e86000 {
+			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+			reg = <0x44e86000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		rtc: rtc@44e3e000 {
+			compatible = "ti,am4372-rtc","ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "rtc";
+			status = "disabled";
+		};
+
+		wdt: wdt@44e35000 {
+			compatible = "ti,am4372-wdt","ti,omap3-wdt";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		gpio0: gpio@44e07000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x44e07000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio1";
+			status = "disabled";
+		};
+
+		gpio1: gpio@4804c000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x4804c000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio2";
+			status = "disabled";
+		};
+
+		gpio2: gpio@481ac000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ac000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio3";
+			status = "disabled";
+		};
+
+		gpio3: gpio@481ae000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ae000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio4";
+			status = "disabled";
+		};
+
+		gpio4: gpio@48320000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48320000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio5";
+			status = "disabled";
+		};
+
+		gpio5: gpio@48322000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48322000 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio6";
+			status = "disabled";
+		};
+
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48030000 0x400>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x1000>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x481d8000 0x1000>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x47810000 0x1000>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a0000 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@481a2000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a2000 0x400>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@481a4000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a4000 0x400>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@48345000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48345000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi4";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,am4372-cpsw","ti,cpsw";
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
+			status = "disabled";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			syscon = <&scm_conf>;
+			ranges;
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				reg = <0x4a101000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@44e10650 {
+				compatible = "ti,am43xx-cpsw-phy-sel";
+				reg= <0x44e10650 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss0";
+			status = "disabled";
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss1";
+			status = "disabled";
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss2";
+			status = "disabled";
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
+		epwmss3: epwmss@48306000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48306000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss3";
+			status = "disabled";
+
+			ehrpwm3: ehrpwm@48306200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48306200 0x80>;
+				ti,hwmods = "ehrpwm3";
+				status = "disabled";
+			};
+		};
+
+		epwmss4: epwmss@48308000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48308000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss4";
+			status = "disabled";
+
+			ehrpwm4: ehrpwm@48308200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48308200 0x80>;
+				ti,hwmods = "ehrpwm4";
+				status = "disabled";
+			};
+		};
+
+		epwmss5: epwmss@4830a000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x4830a000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss5";
+			status = "disabled";
+
+			ehrpwm5: ehrpwm@4830a200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x4830a200 0x80>;
+				ti,hwmods = "ehrpwm5";
+				status = "disabled";
+			};
+		};
+
+		tscadc: tscadc@44e0d000 {
+			compatible = "ti,am3359-tscadc";
+			reg = <0x44e0d000 0x1000>;
+			ti,hwmods = "adc_tsc";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&adc_tsc_fck>;
+			clock-names = "fck";
+			status = "disabled";
+
+			tsc {
+				compatible = "ti,am3359-tsc";
+			};
+
+			adc {
+				#io-channel-cells = <1>;
+				compatible = "ti,am3359-adc";
+			};
+
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x300>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aes: aes@53501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53501000 0xa0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 6
+				&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@53701000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x53701000 0xa0>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 34
+				&edma 33>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+			       <&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+			       <&edma 11>;
+			dma-names = "tx", "rx";
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			clocks = <&l4ls_gclk>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			clocks = <&l3s_gclk>;
+			clock-names = "fck";
+			reg = <0x50000000 0x2000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		am43xx_control_usb2phy1: control-phy@44e10620 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10620 0x4>;
+			reg-names = "power";
+		};
+
+		am43xx_control_usb2phy2: control-phy@0x44e10628 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10628 0x4>;
+			reg-names = "power";
+		};
+
+		ocp2scp0: ocp2scp@483a8000 {
+			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp0";
+
+			usb2_phy1: phy@483a8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483a8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy1>;
+				clocks = <&usb_phy0_always_on_clk32k>,
+					 <&usb_otg_ss0_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ocp2scp1: ocp2scp@483e8000 {
+			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy2: phy@483e8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483e8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy2>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dwc3_1: omap_dwc3@48380000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss0";
+			reg = <0x48380000 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb1: usb@48390000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x48390000 0x10000>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		dwc3_2: omap_dwc3@483c0000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x483c0000 0x10000>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb2: usb@483d0000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x483d0000 0x10000>;
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		qspi: qspi@47900000 {
+			compatible = "ti,am4372-qspi";
+			reg = <0x47900000 0x100>,
+			      <0x30000000 0x4000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			interrupts = <0 138 0x4>;
+			num-cs = <4>;
+			status = "disabled";
+		};
+
+		hdq: hdq@48347000 {
+			compatible = "ti,am4372-hdq";
+			reg = <0x48347000 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&func_12m_clk>;
+			clock-names = "fck";
+			ti,hwmods = "hdq1w";
+			status = "disabled";
+		};
+
+		dss: dss@4832a000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x4832a000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&disp_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc: dispc@4832a400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x4832a400 0x400>;
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: rfbi@4832a800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x4832a800 0x100>;
+				ti,hwmods = "dss_rfbi";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x40000>; /* 256k */
+		};
+
+		dcan0: can@481cc000 {
+			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+			ti,hwmods = "d_can0";
+			clocks = <&dcan0_fck>;
+			clock-names = "fck";
+			reg = <0x481cc000 0x2000>;
+			syscon-raminit = <&scm_conf 0x644 0>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dcan1: can@481d0000 {
+			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+			ti,hwmods = "d_can1";
+			clocks = <&dcan1_fck>;
+			clock-names = "fck";
+			reg = <0x481d0000 0x2000>;
+			syscon-raminit = <&scm_conf 0x644 1>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vpfe0: vpfe@48326000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48326000 0x2000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe0";
+			status = "disabled";
+		};
+
+		vpfe1: vpfe@48328000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48328000 0x2000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe1";
+			status = "disabled";
+		};
+	};
+};
+
+/include/ "am43xx-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/am437x-cm-t43.dts b/roms/u-boot/arch/arm/dts/am437x-cm-t43.dts
new file mode 100644
index 000000000..063113a5d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am437x-cm-t43.dts
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am4372.dtsi"
+
+/ {
+	model = "CompuLab CM-T43";
+	compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ledb {
+			label = "cm-t43:green";
+			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vmmc_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+};
+
+&am43xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cm_t43_led_pins>;
+
+	cm_t43_led_pins: cm_t43_led_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa78, MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	emmc_pins: emmc_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
+			AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
+			AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
+			AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
+			AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
+			AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
+			AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
+			AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP  | MUX_MODE0)
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0xa74, MUX_MODE3)
+			/* Slave 2 */
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.txen */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a1.rxctl */
+			AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.txd3 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.txd2 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.txd1 */
+			AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.txd0 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.tclk */
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a7.rclk */
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a8.rxd3 */
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a9.rxd2 */
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a10.rxd1 */
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a11.rxd0 */
+			AM4372_IOPAD(0xa38, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x1000000>;
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MTD partition table */
+		partition@0 {
+			label = "kernel";
+			reg = <0x0 0x00980000>;
+		};
+		partition@980000 {
+			label = "dtb";
+			reg = <0x00980000 0x00080000>;
+		};
+		partition@a00000 {
+			label = "rootfs";
+			reg = <0x00a00000 0x0>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			regulator-name = "vdcdc3";
+			regulator-suspend-enable;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	eeprom_module: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	dmas = <&edma 16 0
+		&edma 17 0>;
+	dma-names = "tx0", "rx0";
+
+	flash: w25q64cvzpig@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x100000>;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
+};
+
+&dwc3_1 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&dwc3_2 {
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "peripheral", "host", "otg";
+};
+
+&elm {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordiante-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+	operating-points = <1000000 1330000>,
+			   <800000 1260000>,
+			   <720000 1200000>,
+			   <600000 1100000>,
+			   <300000 950000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am437x-gp-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
new file mode 100644
index 000000000..b55aa8e76
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "dra7.dtsi"
+ */
+
+#include "am4372-u-boot.dtsi"
+
+/{
+	ocp {
+		u-boot,dm-spl;
+	};
+};
+
+&uart0 {
+	u-boot,dm-spl;
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+};
+
+&mac {
+	u-boot,dm-spl;
+};
+
+&davinci_mdio {
+	u-boot,dm-spl;
+};
+
+&cpsw_emac0 {
+	u-boot,dm-spl;
+};
+
+&phy_sel {
+	u-boot,dm-spl;
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+};
+
+&l4_wkup {
+	u-boot,dm-spl;
+};
+
+&scm {
+	u-boot,dm-spl;
+};
+
+&scm_conf {
+	u-boot,dm-spl;
+};
+
+&ethphy0 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/am437x-gp-evm.dts b/roms/u-boot/arch/arm/dts/am437x-gp-evm.dts
new file mode 100644
index 000000000..3c500d52d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am437x-gp-evm.dts
@@ -0,0 +1,802 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI AM437x GP EVM";
+	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+		linux,keymap = <0x00000201      /* P1 */
+				0x00010202      /* P2 */
+				0x01000067      /* UP */
+				0x0101006a      /* RIGHT */
+				0x02000069      /* LEFT */
+				0x0201006c>;      /* DOWN */
+		};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	/* fixed 12MHz oscillator */
+	refclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+};
+
+&am43xx_pinmux {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&wlan_pins_default>;
+	pinctrl-1 = <&wlan_pins_sleep>;
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	pixcir_ts_pins: pixcir_ts_pins {
+		pinctrl-single,pins = <
+			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
+			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	dcan0_default: dcan0_default_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			0x17c (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+
+	dcan1_default: dcan1_default_pins {
+		pinctrl-single,pins = <
+			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
+			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+		>;
+	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_default: vpfe1_pins_default {
+		pinctrl-single,pins = <
+			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_sleep: vpfe1_pins_sleep {
+		pinctrl-single,pins = <
+			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	mmc3_pins_default: pinmux_mmc3_pins_default {
+		pinctrl-single,pins = <
+			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
+			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
+			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
+			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
+			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
+			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
+		>;
+	};
+
+	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+		pinctrl-single,pins = <
+			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
+			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
+			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
+		>;
+	};
+
+	wlan_pins_default: pinmux_wlan_pins_default {
+		pinctrl-single,pins = <
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+		>;
+	};
+
+	wlan_pins_sleep: pinmux_wlan_pins_sleep {
+		pinctrl-single,pins = <
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			0x228 (PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
+			0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+			0x230 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
+			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65218";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdcdc3";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_0: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+
+		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+	/* disable MMC3 as SDIO is not supported in U-Boot */
+	status = "disabled";
+	/* these are on the crossbar and are outlined in the
+	   xbar-event-map element */
+	dmas = <&edma 30
+		&edma 31>;
+	dma-names = "tx", "rx";
+	vmmc-supply = <&vmmcwl_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_sleep>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	ti,non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&edma {
+	ti,edma-xbar-event-map = /bits/ 16 <1 30
+					    2 31>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000c0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002c0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_default>;
+	status = "okay";
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_default>;
+	status = "okay";
+};
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	port {
+		vpfe0_ep: endpoint {
+			remote-endpoint = <&ov2659_1>;
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			remote-endpoint = <&ov2659_0>;
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am437x-idk-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am437x-idk-evm-u-boot.dtsi
new file mode 100644
index 000000000..50fe09cfc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am437x-idk-evm-u-boot.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "am4372-u-boot.dtsi"
+
+/{
+	ocp {
+		u-boot,dm-spl;
+	};
+
+	xtal25mhz: xtal25mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&uart0 {
+	u-boot,dm-spl;
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+
+	cdce913: cdce913@65 {
+		compatible = "ti,cdce913";
+		reg = <0x65>;
+		clocks = <&xtal25mhz>;
+		#clock-cells = <1>;
+		xtal-load-pf = <0>;
+	};
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/am437x-idk-evm.dts b/roms/u-boot/arch/arm/dts/am437x-idk-evm.dts
new file mode 100644
index 000000000..8f6824c19
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am437x-idk-evm.dts
@@ -0,0 +1,423 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM437x Industrial Development Kit";
+	compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	v24_0d: fixed-regulator-v24_0d {
+		compatible = "regulator-fixed";
+		regulator-name = "V24_0D";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixed-regulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	vdd_corereg: fixed-regulator-vdd_corereg {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_COREREG";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	vdd_core: fixed-regulator-vdd_core {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_CORE";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_corereg>;
+	};
+
+	v1_8dreg: fixed-regulator-v1_8dreg{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_8DREG";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	v1_8d: fixed-regulator-v1_8d{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_8D";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v1_8dreg>;
+	};
+
+	v1_5dreg: fixed-regulator-v1_5dreg{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_5DREG";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	v1_5d: fixed-regulator-v1_5d{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_5D";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v1_5dreg>;
+	};
+
+	gpio_keys: gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+
+		switch@0 {
+			label = "power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+};
+
+&am43xx_pinmux {
+	gpio_keys_pins_default: gpio_keys_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c0_pins_sleep: i2c0_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	i2c2_pins_default: i2c2_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+			AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+		>;
+	};
+
+	i2c2_pins_sleep: i2c2_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins_default: pinmux_mmc1_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ecap0_pins_default: backlight_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	qspi_pins_default: qspi_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+		>;
+	};
+
+	qspi_pins_sleep: qspi_pins_sleep{
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-1 = <&i2c0_pins_sleep>;
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	tps: tps62362@60 {
+		compatible = "ti,tps62362";
+		reg = <0x60>;
+		regulator-name = "VDD_MPU";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1330000>;
+		regulator-boot-on;
+		regulator-always-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		vin-supply = <&v3_3d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_default>;
+	pinctrl-1 = <&i2c2_pins_sleep>;
+	clock-frequency = <100000>;
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_sleep>;
+	vmmc-supply = <&v3_3d>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_pins_default>;
+	pinctrl-1 = <&qspi_pins_sleep>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l", "jedec,spi-nor";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * MTD partition table.  The ROM checks the first 512KiB for a
+		 * valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+};
+
+&rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&tps>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am437x-sk-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am437x-sk-evm-u-boot.dtsi
new file mode 100644
index 000000000..3aa9195e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am437x-sk-evm-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "am4372-u-boot.dtsi"
+
+/{
+	ocp {
+		u-boot,dm-spl;
+	};
+};
+
+&uart0 {
+	u-boot,dm-spl;
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/am437x-sk-evm.dts b/roms/u-boot/arch/arm/dts/am437x-sk-evm.dts
new file mode 100644
index 000000000..66a3bd1df
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am437x-sk-evm.dts
@@ -0,0 +1,713 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x SK EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM437x SK EVM";
+	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM437x-SK-EVM";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <24000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT";
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_pins>;
+
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <5>;
+
+		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
+				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
+
+		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
+				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
+
+		linux,keymap = <
+				MATRIX_KEY(0, 0, KEY_DOWN)
+				MATRIX_KEY(0, 1, KEY_RIGHT)
+				MATRIX_KEY(1, 0, KEY_LEFT)
+				MATRIX_KEY(1, 1, KEY_UP)
+			>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led@0 {
+			label = "am437x-sk:red:heartbeat";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "am437x-sk:green:mmc1";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "am437x-sk:blue:cpu0";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "am437x-sk:blue:usr3";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
+			default-state = "off";
+		};
+	};
+
+	lcd0: display {
+		compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <2>;
+			hback-porch = <2>;
+			hsync-len = <41>;
+			vfront-porch = <2>;
+			vback-porch = <2>;
+			vsync-len = <10>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+&am43xx_pinmux {
+	matrix_keypad_pins: matrix_keypad_pins {
+		pinctrl-single,pins = <
+			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
+			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
+			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
+			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
+		>;
+	};
+
+	leds_pins: leds_pins {
+		pinctrl-single,pins = <
+			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
+			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
+			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
+			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+		>;
+	};
+
+	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
+		pinctrl-single,pins = <
+			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
+		>;
+	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x12c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x114 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x128 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x124 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x120 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			0x11c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			0x130 (PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x118 (PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x140 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			0x13c (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x138 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			0x134 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+
+			/* Slave 2 */
+			0x58 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x40 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x54 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x50 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x4c (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x48 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x5c (PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x44 (PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			0x6c (PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			0x68 (PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x64 (PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x60 (PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value */
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT | MUX_MODE1)
+			0x028 (PIN_OUTPUT | MUX_MODE1)
+			0x02c (PIN_OUTPUT | MUX_MODE1)
+			0x030 (PIN_OUTPUT | MUX_MODE1)
+			0x034 (PIN_OUTPUT | MUX_MODE1)
+			0x038 (PIN_OUTPUT | MUX_MODE1)
+			0x03c (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)
+			0x0ac (PIN_OUTPUT | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)
+			0x0bc (PIN_OUTPUT | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)
+			0x0cc (PIN_OUTPUT | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)
+			0x0dc (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
+			0x0ec (PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
+
+		>;
+	};
+
+	qspi_pins: qspi_pins {
+		pinctrl-single,pins = <
+			0x7c (PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			0x88 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
+			0x90 (PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			0x94 (PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			0x98 (PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			0x9c (PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+		>;
+	};
+
+	usb1_pins: usb1_pins {
+		pinctrl-single,pins = <
+			0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
+
+	usb2_pins: usb2_pins {
+		pinctrl-single,pins = <
+			0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	tps@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			/* VDD_CORE limits min of OPP50 and max of OPP100 */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdds_ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc4: regulator-dcdc4 {
+			compatible = "ti,tps65218-dcdc4";
+			regulator-name = "v3_3d";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-name = "v1_8d";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		power-button {
+			compatible = "ti,tps65218-pwrbutton";
+			status = "okay";
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	edt-ft5306@38 {
+		status = "okay";
+		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5306_ts_pins>;
+
+		reg = <0x38>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <31 0>;
+
+		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&dcdc4>;
+		IOVDD-supply = <&dcdc4>;
+		DRVDD-supply = <&dcdc4>;
+		DVDD-supply = <&ldo1>;
+	};
+
+	lis331dlh@18 {
+		compatible = "st,lis331dlh";
+		reg = <0x18>;
+		status = "okay";
+
+		Vdd-supply = <&dcdc4>;
+		Vdd_IO-supply = <&dcdc4>;
+		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&dcdc4>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l","jedec,spi-nor";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp1_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;
+	tdm-slots = <2>;
+	serial-dir = <
+		0 0 1 2
+	>;
+
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	/* Camera port */
+	port {
+		vpfe0_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am43x-epos-evm.dts b/roms/u-boot/arch/arm/dts/am43x-epos-evm.dts
new file mode 100644
index 000000000..65f157ed5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am43x-epos-evm.dts
@@ -0,0 +1,806 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM43x EPOS EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+
+/ {
+	model = "TI AM43x EPOS EVM";
+	compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+			     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+			     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+			     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+		col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+			     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+			     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+			     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+		linux,keymap = <0x00000201	/* P1 */
+			0x01000204	/* P4 */
+			0x02000207	/* P7 */
+			0x0300020a	/* NUMERIC_STAR */
+			0x00010202	/* P2 */
+			0x01010205	/* P5 */
+			0x02010208	/* P8 */
+			0x03010200	/* P0 */
+			0x00020203	/* P3 */
+			0x01020206	/* P6 */
+			0x02020209	/* P9 */
+			0x0302020b	/* NUMERIC_POUND */
+			0x00030067	/* UP */
+			0x0103006a	/* RIGHT */
+			0x0203006c	/* DOWN */
+			0x03030069>;	/* LEFT */
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM43-EPOS-EVM";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1LP", "Microphone Jack",
+			"MIC1RP", "Microphone Jack",
+			"MIC1LP", "MICBIAS",
+			"MIC1RP", "MICBIAS",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPL",
+			"Speaker", "SPR";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3111>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&am43xx_pinmux {
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		nand_flash_x8: nand_flash_x8 {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+
+		ecap0_pins: backlight_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			>;
+		};
+
+		i2c2_pins: pinmux_i2c2_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+			>;
+		};
+
+		spi0_pins: pinmux_spi0_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+			>;
+		};
+
+		spi1_pins: pinmux_spi1_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+			>;
+		};
+
+		mmc1_pins: pinmux_mmc1_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			>;
+		};
+
+		qspi1_default: qspi1_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+				AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
+			>;
+		};
+
+		pixcir_ts_pins: pixcir_ts_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+			>;
+		};
+
+		hdq_pins: pinmux_hdq_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+			>;
+		};
+
+		dss_pins: dss_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			>;
+		};
+
+		display_mux_pins: display_mux_pins {
+			pinctrl-single,pins = <
+				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
+
+		vpfe1_pins_default: vpfe1_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+			>;
+		};
+
+		vpfe1_pins_sleep: vpfe1_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			>;
+		};
+
+		mcasp1_pins: mcasp1_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+			>;
+		};
+
+		mcasp1_sleep_pins: mcasp1_sleep_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	slaves = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@16 {
+		reg = <16>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	tps65218: tps65218@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65218";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdcdc3";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc4: regulator-dcdc4 {
+			compatible = "ti,tps65218-dcdc4";
+			regulator-name = "vdcdc4";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+
+		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+
+	tlv320aic3111: tlv320aic3111@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3111";
+		reg = <0x18>;
+		status = "okay";
+
+		ai31xx-micbias-vg = <MICBIAS_2_0V>;
+
+		/* Regulators */
+		HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		SPRVDD-supply = <&vbat>; /* vbat */
+		SPLVDD-supply = <&vbat>; /* vbat */
+		AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
+		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
+	status = "okay";
+
+	p1 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
+		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,we-on-ns = <0>;   /* cs-on-ns */
+		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
+		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
+		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
+		gpmc,access-ns = <30>; /* tCEA + 4*/
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000C0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002C0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&ecap0 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&qspi {
+	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_default>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&hdq {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&synctimer_32kclk {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am43xx-clocks.dtsi b/roms/u-boot/arch/arm/dts/am43xx-clocks.dtsi
new file mode 100644
index 000000000..d0c0dfa4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am43xx-clocks.dtsi
@@ -0,0 +1,757 @@
+/*
+ * Device Tree Source for AM43xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scm_clocks {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0040>;
+	};
+
+	crystal_freq_sel_ck: crystal_freq_sel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0040>;
+	};
+
+	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm3_tbclk: ehrpwm3_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <4>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm4_tbclk: ehrpwm4_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm5_tbclk: ehrpwm5_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <6>;
+		reg = <0x0664>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d3c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d40>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e30>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2df0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a38>;
+	};
+
+	sysclk_div: sysclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
+		reg = <0x4248>;
+	};
+
+	clk_32k_tpm_ck: clk_32k_tpm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4200>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4204>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4208>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x420c>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4210>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4214>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4218>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x422c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
+		reg = <0x4238>;
+	};
+
+	clk_32k_mosc_ck: clk_32k_mosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4240>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2b68>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c78>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c80>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c88>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c90>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c98>;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x423c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x423c>;
+		ti,max-div = <2>;
+	};
+
+	disp_clk: disp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x4244>;
+		ti,set-rate-parent;
+	};
+
+	dpll_extdev_ck: dpll_extdev_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+	};
+
+	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_extdev_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mux_synctimer32k_ck: mux_synctimer32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
+		reg = <0x4230>;
+	};
+
+	synctimer_32kclk: synctimer_32kclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&mux_synctimer32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a30>;
+	};
+
+	timer8_fck: timer8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x421c>;
+	};
+
+	timer9_fck: timer9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4220>;
+	};
+
+	timer10_fck: timer10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4224>;
+	};
+
+	timer11_fck: timer11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4228>;
+	};
+
+	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpsw_50m_clkdiv>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_per_ck>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e14>;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_aging_clk_div: dll_aging_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x4250>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	div_core_25m_ck: div_core_25m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_12m_clk: func_12m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	vtp_clk_div: vtp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4260>;
+	};
+
+	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a40>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a48>;
+	};
+
+	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a60>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a68>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am571x-idk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am571x-idk-u-boot.dtsi
new file mode 100644
index 000000000..65199200e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am571x-idk-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#include "am57xx-idk-common-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/am571x-idk.dts b/roms/u-boot/arch/arm/dts/am571x-idk.dts
new file mode 100644
index 000000000..798fbfe19
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am571x-idk.dts
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+
+/ {
+	model = "TI AM5718 IDK";
+	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		usr1-led {
+			label = "status1:red:usr";
+			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		usr2-led {
+			label = "status1:green:usr";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am5729-beagleboneai.dts b/roms/u-boot/arch/arm/dts/am5729-beagleboneai.dts
new file mode 100644
index 000000000..34293034e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am5729-beagleboneai.dts
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+#include "dra74x.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+/ {
+	model = "BeagleBoard.org BeagleBone AI";
+	compatible = "beagle,am5729-beagleboneai", "ti,am5728",
+		     "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+		display0 = &hdmi_conn;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	vdd_adc: gpioregulator-vdd_adc {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_adc";
+		vin-supply = <&vdd_5v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0
+			3300000 1>;
+	};
+
+	vdd_5v: fixedregulator-vdd_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&vdd_ddr>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr4";
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+			default-state = "off";
+		};
+	};
+
+	hdmi_conn: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_encoder_out>;
+			};
+		};
+	};
+
+	hdmi_enc: encoder@0 {
+		/* "ti,tpd12s016" software compatible with "ti,tpd12s015"
+		 *  no need for individual driver
+		 */
+		compatible = "ti,tpd12s015";
+		gpios = <0>,
+			<0>,
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			port@0 {
+				reg = <0x0>;
+
+				hdmi_encoder_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <0x1>;
+
+				hdmi_encoder_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+	};
+
+	brcmf_pwrseq: brcmf_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>,	/* BT-REG-ON */
+				<&gpio3 18 GPIO_ACTIVE_LOW>;	/* WL-REG-ON */
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		ti,enable-id-detection;
+		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vdd_5v>;
+			smps3-in-supply = <&vdd_5v>;
+			smps45-in-supply = <&vdd_5v>;
+			smps6-in-supply = <&vdd_5v>;
+			smps7-in-supply = <&vdd_5v>;
+			mps3-in-supply = <&vdd_5v>;
+			smps8-in-supply = <&vdd_5v>;
+			smps9-in-supply = <&vdd_5v>;
+			ldo1-in-supply = <&vdd_5v>;
+			ldo2-in-supply = <&vdd_5v>;
+			ldo3-in-supply = <&vdd_5v>;
+			ldo4-in-supply = <&vdd_5v>;
+			ldo9-in-supply = <&vdd_5v>;
+			ldoln-in-supply = <&vdd_5v>;
+			ldousb-in-supply = <&vdd_5v>;
+			ldortc-in-supply = <&vdd_5v>;
+
+			regulators {
+				vdd_mpu: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_ddr: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_dspeve: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_gpu: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_core: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;	/*** 1.15V */
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_iva: smps8 {
+					/* VDD_IVAHD */				/*** 1.06V */
+					regulator-name = "smps8";
+				};
+
+				vdd_3v3: smps9 {
+					/* VDD_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_sd: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_1v8: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo3: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo4: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				vdd_rtc: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = < 840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_pll: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&vdd_mpu>;
+	voltage-tolerance = <1>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&davinci_mdio {
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;
+
+	phy0: ethernet-phy@1 {
+		reg = <4>;
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&mac {
+	slaves = <1>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii";
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_sd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vdd_1v8>;
+	vqmmc-supply = <&vdd_1v8>;
+	bus-width = <8>;
+	ti,non-removable;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	ti,needs-special-reset;
+	dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
+	dma-names = "tx", "rx";
+
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+	pinctrl-3 = <&mmc2_pins_hs200>;
+
+};
+
+&mmc4 {
+	/* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
+	/* HS: High speed up to 50 MHz (3.3 V signaling). */
+	/* SDR12: SDR up to 25 MHz (1.8 V signaling). */
+	/* SDR25: SDR up to 50 MHz (1.8 V signaling). */
+	/* SDR50: SDR up to 100 MHz (1.8 V signaling). */
+	/* SDR104: SDR up to 208 MHz (1.8 V signaling) */
+	/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
+	status = "okay";
+
+	ti,needs-special-reset;
+	vmmc-supply = <&vdd_3v3>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	bus-width = <4>;
+	ti,non-removable;
+	non-removable;
+	no-1-8-v;
+	max-frequency = <24000000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmc-pwrseq = <&brcmf_pwrseq>;
+
+	brcmf: wifi@1 {
+		status = "okay";
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		brcm,sd-head-align = <4>;
+		brcm,sd_head_align = <4>;
+		brcm,sd_sgentry_align = <512>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&dss {
+	status = "okay";
+	vdda_video-supply = <&vdd_1v8_pll>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&vdd_1v8_phy_ldo4>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_encoder_in>;
+		};
+	};
+};
+
+&bandgap {
+	status = "okay";
+};
+
+&cpu_alert0 {
+	temperature = <55000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&sata {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+/* bluetooth */
+&uart6 {
+	status = "okay";
+};
+
+/* cape header stuff */
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+#include "omap5-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/am572x-idk-common.dtsi b/roms/u-boot/arch/arm/dts/am572x-idk-common.dtsi
new file mode 100644
index 000000000..c6d858b31
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am572x-idk-common.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	status-leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		cpu1-led {
+			label = "status1:red:cpu1";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu1";
+		};
+
+		usr1-led {
+			label = "status1:green:usr";
+			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am572x-idk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am572x-idk-u-boot.dtsi
new file mode 100644
index 000000000..65199200e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am572x-idk-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#include "am57xx-idk-common-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/am572x-idk.dts b/roms/u-boot/arch/arm/dts/am572x-idk.dts
new file mode 100644
index 000000000..42e88c1bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am572x-idk.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am572x-idk-common.dtsi"
+#include "am57xx-idk-common.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+
+/ {
+	model = "TI AM5728 IDK";
+	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
+		     "ti,dra7";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am574x-idk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am574x-idk-u-boot.dtsi
new file mode 100644
index 000000000..65199200e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am574x-idk-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#include "am57xx-idk-common-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/am574x-idk.dts b/roms/u-boot/arch/arm/dts/am574x-idk.dts
new file mode 100644
index 000000000..0de73616b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am574x-idk.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+	model = "TI AM5748 IDK";
+	compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7";
+};
+
+&qspi {
+	spi-max-frequency = <96000000>;
+	m25p80@0 {
+		spi-max-frequency = <96000000>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_default>;
+	pinctrl-2 = <&mmc2_pins_default>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-common.dtsi b/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-common.dtsi
new file mode 100644
index 000000000..d6b94d528
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-common.dtsi
@@ -0,0 +1,590 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &mcp_rtc;
+		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&regen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&smps3_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beagle-x15:usr0";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beagle-x15:usr1";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beagle-x15:usr2";
+			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beagle-x15:usr3";
+			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			default-state = "off";
+		};
+	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+		#cooling-cells = <2>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			clocks = <&clkout2_clk>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_CORE */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS7 unused */
+
+				smps8_reg: smps8 {
+					/* VDD_1V8 */
+					regulator-name = "smps8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS9 unused */
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_SHV5 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	tmp102: tmp102@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	mcp_rtc: rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+				      <&dra7_pmx_core 0x424>;
+		interrupt-names = "irq", "wakeup";
+
+		vcc-supply = <&vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	/*
+	 * Stand alone usage is peripheral only.
+	 * However, with some resistor modifications
+	 * this port can be used via expansion connectors
+	 * as "host" or "dual-role". If so, provide
+	 * the necessary dr_mode override in the expansion
+	 * board's DT.
+	 */
+	dr_mode = "peripheral";
+};
+
+&cpu_trips {
+	cpu_alert1: cpu_alert1 {
+		temperature = <50000>; /* millicelsius */
+		hysteresis = <2000>; /* millicelsius */
+		type = "active";
+	};
+};
+
+&cpu_cooling_maps {
+	map1 {
+		trip = <&cpu_alert1>;
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&thermal_zones {
+	board_thermal: board_thermal {
+		polling-delay-passive = <1250>; /* milliseconds */
+		polling-delay = <1500>; /* milliseconds */
+
+				/* sensor       ID */
+		thermal-sensors = <&tmp102     0>;
+
+		board_trips: trips {
+			board_alert0: board_alert {
+				temperature = <40000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "active";
+			};
+
+			board_crit: board_crit {
+				temperature = <105000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+
+		board_cooling_maps: cooling-maps {
+			map0 {
+				trip = <&board_alert0>;
+				cooling-device =
+				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+       };
+};
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&pcie1_rc {
+	status = "ok";
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_ep {
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-revb1.dts b/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-revb1.dts
new file mode 100644
index 000000000..34c699658
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-revb1.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev B1";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+	max-speed = <100>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-revc.dts b/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-revc.dts
new file mode 100644
index 000000000..ccd99160b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am57xx-beagle-x15-revc.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev C";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am57xx-beagle-x15.dts b/roms/u-boot/arch/arm/dts/am57xx-beagle-x15.dts
new file mode 100644
index 000000000..8d9bdf10a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am57xx-beagle-x15.dts
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	/* NOTE: This describes the "original" pre-production A2 revision */
+	model = "TI AM5728 BeagleBoard-X15";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+
+	vmmc-supply = <&ldo1_reg>;
+	/delete-property/ sd-uhs-sdr104;
+	/delete-property/ sd-uhs-sdr50;
+	/delete-property/ sd-uhs-ddr50;
+	/delete-property/ sd-uhs-sdr25;
+	/delete-property/ sd-uhs-sdr12;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+	/delete-property/ mmc-hs200-1_8v;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+	max-speed = <100>;
+};
diff --git a/roms/u-boot/arch/arm/dts/am57xx-commercial-grade.dtsi b/roms/u-boot/arch/arm/dts/am57xx-commercial-grade.dtsi
new file mode 100644
index 000000000..3eed6e09c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am57xx-commercial-grade.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+&cpu_alert0 {
+	temperature = <80000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <90000>; /* milliCelsius */
+};
diff --git a/roms/u-boot/arch/arm/dts/am57xx-idk-common-u-boot.dtsi b/roms/u-boot/arch/arm/dts/am57xx-idk-common-u-boot.dtsi
new file mode 100644
index 000000000..b07aea004
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am57xx-idk-common-u-boot.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#include "omap5-u-boot.dtsi"
+
+/ {
+	xtal25mhz: xtal25mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&i2c1 {
+	cdce913: cdce913@65 {
+		compatible = "ti,cdce913";
+		reg = <0x65>;
+		clocks = <&xtal25mhz>;
+		#clock-cells = <1>;
+		xtal-load-pf = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am57xx-idk-common.dtsi b/roms/u-boot/arch/arm/dts/am57xx-idk-common.dtsi
new file mode 100644
index 000000000..590fb14ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am57xx-idk-common.dtsi
@@ -0,0 +1,486 @@
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-industrial-grade.dtsi"
+
+/ {
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "VMAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&v3_3d>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0)		/* dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP)	/* dcan1_rx.off */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x418>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vmain>;
+			smps3-in-supply = <&vmain>;
+			smps45-in-supply = <&vmain>;
+			smps6-in-supply = <&vmain>;
+			smps7-in-supply = <&vmain>;
+			smps8-in-supply = <&vmain>;
+			smps9-in-supply = <&vmain>;
+			ldo1-in-supply = <&vmain>;
+			ldo2-in-supply = <&vmain>;
+			ldo3-in-supply = <&vmain>;
+			ldo4-in-supply = <&vmain>;
+			ldo9-in-supply = <&vmain>;
+			ldoln-in-supply = <&vmain>;
+			ldousb-in-supply = <&vmain>;
+			ldortc-in-supply = <&vmain>;
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					/* VDD_IVA + VDD_DSP on AM571 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* 5728 - VDD_IVAHD */
+					/* 5718 - N.C. test point */
+					regulator-name = "smps8";
+				};
+
+				smps9_reg: smps9 {
+					/* VDD_3_3D */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					/* NOTE: on rev 1.3a, data supply */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			/* ID & VBUS GPIOs provided in board dts */
+		};
+	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x248>;
+};
+
+&rtc {
+	status = "okay";
+	ext-clk-src;
+};
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&usb2 {
+	dr_mode = "peripheral";
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	vqmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	bus-width = <8>;
+	ti,non-removable;
+	max-frequency = <96000000>;
+	no-1-8-v;
+	/delete-property/ mmc-hs200-1_8v;
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000040000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@2 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@3 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@5 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/am57xx-industrial-grade.dtsi b/roms/u-boot/arch/arm/dts/am57xx-industrial-grade.dtsi
new file mode 100644
index 000000000..422f953fc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/am57xx-industrial-grade.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+&cpu_alert0 {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <105000>; /* milliCelsius */
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-370-xp.dtsi b/roms/u-boot/arch/arm/dts/armada-370-xp.dtsi
new file mode 100644
index 000000000..50fc0be9f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-370-xp.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file contains the definitions that are common to the Armada
+ * 370 and Armada XP SoC.
+ */
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 370 and XP SoC";
+	compatible = "marvell,armada-370-xp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "marvell,sheeva-v7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&mpic>;
+		pcie-mem-aperture = <0xf8000000 0x7e00000>;
+		pcie-io-aperture  = <0xffe00000 0x100000>;
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs3: devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+			u-boot,dm-pre-reloc;
+
+			rtc: rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <50>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <31>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <32>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <41>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <42>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pin-ctrl@18000 {
+				reg = <0x18000 0x38>;
+			};
+
+			coredivclk: corediv-clock@18740 {
+				compatible = "marvell,armada-370-corediv-clock";
+				reg = <0x18740 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			coherencyfab: coherency-fabric@20200 {
+				compatible = "marvell,coherency-fabric";
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
+			};
+
+			timer: timer@20300 {
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+			};
+
+			watchdog: watchdog@20300 {
+				reg = <0x20300 0x34>, <0x20704 0x4>;
+			};
+
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			pmsu: pmsu@22000 {
+				compatible = "marvell,armada-370-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			usb0: usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			usb1: usb@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x500>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			eth0: ethernet@70000 {
+				reg = <0x70000 0x4000>;
+				interrupts = <8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+			};
+
+			mdio: mdio@72004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			eth1: ethernet@74000 {
+				reg = <0x74000 0x4000>;
+				interrupts = <10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			sata: sata@a0000 {
+				compatible = "marvell,armada-370-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <55>;
+				clocks = <&gateclk 15>, <&gateclk 30>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <113>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdio: mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <54>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
+ };
diff --git a/roms/u-boot/arch/arm/dts/armada-371x.dtsi b/roms/u-boot/arch/arm/dts/armada-371x.dtsi
new file mode 100644
index 000000000..c9e5325b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-371x.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Device Tree Include file for Marvell Armada 371x family of SoCs
+ * (also named 88F3710)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3710 SoC";
+	compatible = "marvell,armada3710", "marvell,armada3700";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-3720-db.dts b/roms/u-boot/arch/arm/dts/armada-3720-db.dts
new file mode 100644
index 000000000..42e7ddd25
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-3720-db.dts
@@ -0,0 +1,164 @@
+/*
+ * Device Tree file for Marvell Armada 3720 development board
+ * (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		i2c0 = &i2c0;
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+};
+
+&comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+		phy-speed = <COMPHY_SPEED_2_5G>;
+	};
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+/* CON3 */
+&sata {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	status = "okay";
+};
+
+&sdhci1 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
+
+/* Exported on the micro USB connector CON32 through an FTDI */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/* CON29 */
+&usb2 {
+	status = "okay";
+};
+
+/* CON31 */
+&usb3 {
+	status = "okay";
+};
+
+/* CON17 */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-3720-espressobin.dts b/roms/u-boot/arch/arm/dts/armada-3720-espressobin.dts
new file mode 100644
index 000000000..d86d8f0b6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-3720-espressobin.dts
@@ -0,0 +1,192 @@
+/*
+ * Device Tree file for Marvell Armada 3720 community board
+ * (ESPRESSOBin)
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board";
+	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		i2c0 = &i2c0;
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg0: regulator@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		states = <1800000 0x1
+			  3300000 0x0>;
+		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&comphy {
+	max-lanes = <3>;
+	phy0 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+		phy-speed = <COMPHY_SPEED_2_5G>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_SATA0>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+	phy-mode = "rgmii";
+	phy_addr = <0x1>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+/* CON3 */
+&sata {
+	status = "okay";
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&vcc_sd_reg0>;
+	status = "okay";
+};
+
+/* U11 */
+&sdhci1 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
+
+/* Exported on the micro USB connector CON32 through an FTDI */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/* CON29 */
+&usb2 {
+	status = "okay";
+};
+
+/* CON31 */
+&usb3 {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-3720-turris-mox.dts b/roms/u-boot/arch/arm/dts/armada-3720-turris-mox.dts
new file mode 100644
index 000000000..f47ced05c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-3720-turris-mox.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Device Tree file for CZ.NIC Turris Mox Board
+ * 2018 by Marek Behun <marek.behun@nic.cz>
+ *
+ * Based on armada-3720-espressobin.dts by:
+ *   Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *   Konstantin Porotchkin <kostap@marvell.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "CZ.NIC Turris Mox Board";
+	compatible = "cznic,turris-mox", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		i2c0 = &i2c0;
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_ACTIVITY;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			compatible = "gpio-keys";
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	reg_usb3_vbus: usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		shutdown-delay-us = <1000000>;
+		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&comphy {
+	max-lanes = <3>;
+	phy0 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+	phy-mode = "rgmii";
+	phy = <&eth_phy1>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+	};
+};
+
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
+	vqmmc-supply = <&vsdc_reg>;
+	marvell,pad-type = "sd";
+	status = "okay";
+};
+
+&pinctrl_nb {
+	spi_cs1_pins: spi-cs1-pins {
+		groups = "spi_cs1";
+		function = "spi";
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_cs1_pins>;
+	assigned-clocks = <&nb_periph_clk 7>;
+	assigned-clock-parents = <&tbg 1>;
+	assigned-clock-rates = <20000000>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,s25fl064l", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "secure-firmware";
+				reg = <0x0 0x20000>;
+			};
+
+			partition@20000 {
+				label = "a53-firmware";
+				reg = <0x20000 0x160000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+
+			partition@190000 {
+				label = "Rescue system";
+				reg = <0x190000 0x660000>;
+			};
+
+			partition@7f0000 {
+				label = "dtb";
+				reg = <0x7f0000 0x10000>;
+			};
+		};
+	};
+
+	moxtet@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "cznic,moxtet";
+		reg = <1>;
+		reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	vbus-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-3720-uDPU-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-3720-uDPU-u-boot.dtsi
new file mode 100644
index 000000000..fdad90ad1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-3720-uDPU-u-boot.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+	smbios {
+		compatible = "u-boot,sysinfo-smbios";
+
+		smbios {
+			system {
+				product = "uDPU";
+			};
+
+			baseboard {
+				product = "uDPU";
+			};
+
+			chassis {
+				product = "uDPU";
+			};
+		};
+	};
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&sdhci1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-3720-uDPU.dts b/roms/u-boot/arch/arm/dts/armada-3720-uDPU.dts
new file mode 100644
index 000000000..4bf6d2eac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-3720-uDPU.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2018 Methode
+ * Copyright (C) 2018 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include "armada-37xx.dtsi"
+#include "armada-3720-uDPU-u-boot.dtsi"
+
+/ {
+	model = "Methode uDPU Board";
+	compatible = "methode,udpu";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000";
+	};
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		spi0 = &spi0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	mdio: mdio@32004 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy0: ethernet-phy@0 {
+			 reg = <0>;
+		};
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	scsi: scsi {
+		compatible = "marvell,mvebu-scsi";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		max-id = <1>;
+		max-lun = <1>;
+		status = "okay";
+	};
+
+	i2c1: i2c@11080 {
+		compatible = "marvell,armada-3700-i2c", "simple-bus";
+		reg = <0x0 0x11080 0x0 0x80>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		status = "okay";
+	};
+
+	uart1: serial@12200 {
+		compatible = "marvell,armada-3700-uart-ext";
+		reg = <0x0 0x12200 0x0 0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_pins>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		status = "okay";
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
+	vcc_sd_reg0: regulator@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		states = <1800000 0x1
+			3300000 0x0>;
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		sfp,ethernet = <&eth1>;
+		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_SGMII0>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+};
+
+&eth0 {
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	phy = <&ethphy0>;
+};
+
+&eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	phy = <&ethphy1>;
+};
+
+&i2c0 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c1_pins>;
+        status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q1024a","n25q512a";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0 0x400000>;
+		};
+	};
+};
+
+&sdhci1 {
+	non-removable;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	bus-width = <4>;
+	vqmmc-supply = <&vcc_sd_reg0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-372x.dtsi b/roms/u-boot/arch/arm/dts/armada-372x.dtsi
new file mode 100644
index 000000000..512029659
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-372x.dtsi
@@ -0,0 +1,62 @@
+/*
+ * Device Tree Include file for Marvell Armada 372x family of SoCs
+ * (also named 88F3720)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 SoC";
+	compatible = "marvell,armada3720", "marvell,armada3710";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-375-db.dts b/roms/u-boot/arch/arm/dts/armada-375-db.dts
new file mode 100644
index 000000000..343349b8f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-375-db.dts
@@ -0,0 +1,216 @@
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+	model = "Marvell Armada 375 Development Board";
+	compatible = "marvell,a375-db", "marvell,armada375";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			spi@10600 {
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				/*
+				 * SPI conflicts with NAND, so we disable it
+				 * here, and select NAND as the enabled device
+				 * by default.
+				 */
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				spi-flash@0 {
+					u-boot,dm-pre-reloc;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13", "jedec,spi-nor";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+			};
+
+			serial@12000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			pinctrl {
+				sdio_st_pins: sdio-st-pins {
+					marvell,pins = "mpp44", "mpp45";
+					marvell,function = "gpio";
+				};
+			};
+
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+
+			nand: nand@d0000 {
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			usb@54000 {
+				status = "okay";
+			};
+
+			usb3@58000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+			};
+
+			ethernet@f0000 {
+				status = "okay";
+
+				eth0@c4000 {
+					status = "okay";
+					phy = <&phy0>;
+					phy-mode = "rgmii-id";
+				};
+
+				eth1@c5000 {
+					status = "okay";
+					phy = <&phy3>;
+					phy-mode = "gmii";
+				};
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-375.dtsi b/roms/u-boot/arch/arm/dts/armada-375.dtsi
new file mode 100644
index 000000000..62a548a55
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-375.dtsi
@@ -0,0 +1,660 @@
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 375 family SoC";
+	compatible = "marvell,armada375";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-375-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		compatible = "marvell,armada375-mbus", "simple-bus";
+		u-boot,dm-pre-reloc;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,double-linefill-incr = <1>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <1>;
+				prefetch-data = <1>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0xc0054 0x4>;
+				clocks = <&gateclk 19>;
+			};
+
+			/* Network controller */
+			ethernet@f0000 {
+				compatible = "marvell,armada-375-pp2";
+				reg = <0xf0000 0xa000>, /* Packet Processor regs */
+				      <0xc0000 0x3060>, /* LMS regs */
+				      <0xc4000 0x100>,  /* eth0 regs */
+				      <0xc5000 0x100>;  /* eth1 regs */
+				clocks = <&gateclk 3>, <&gateclk 19>;
+				clock-names = "pp_clk", "gop_clk";
+				status = "disabled";
+
+				eth0: eth0@c4000 {
+					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <0>;
+					status = "disabled";
+				};
+
+				eth1: eth1@c5000 {
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <1>;
+					status = "disabled";
+				};
+			};
+
+			rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-375-spi",
+						"marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,armada-375-spi",
+						"marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl {
+				compatible = "marvell,mv88f6720-pinctrl";
+				reg = <0x18000 0x24>;
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp14",  "mpp15";
+					marvell,function = "i2c0";
+				};
+
+				i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp61",  "mpp62";
+					marvell,function = "i2c1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp0", "mpp1", "mpp2",
+						"mpp3", "mpp4", "mpp5",
+						"mpp6", "mpp7", "mpp8",
+						"mpp9", "mpp10", "mpp11",
+						"mpp12", "mpp13";
+					marvell,function = "nand";
+				};
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp24",  "mpp25", "mpp26",
+						     "mpp27", "mpp28", "mpp29";
+					marvell,function = "sd";
+				};
+
+				spi0_pins: spi0-pins {
+					marvell,pins = "mpp0",  "mpp1", "mpp4",
+						     "mpp5", "mpp8", "mpp9";
+					marvell,function = "spi0";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-375-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-375-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			usbcluster: usb-cluster@18400 {
+				compatible = "marvell,armada-375-usb-cluster";
+				reg = <0x18400 0x4>;
+				#phy-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 0>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-375-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+				clocks = <&coreclk 0>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-375-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				phys = <&usbcluster PHY_TYPE_USB2>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			usb@54000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x54000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			usb3@58000 {
+				compatible = "marvell,armada-375-xhci";
+				reg = <0x58000 0x20000>,<0x5b880 0x80>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 16>;
+				phys = <&usbcluster PHY_TYPE_USB3>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 23>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			crypto@90000 {
+				compatible = "marvell,armada-375-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>, <&gateclk 31>,
+					 <&gateclk 28>, <&gateclk 29>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			sata@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 14>, <&gateclk 20>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada375-thermal";
+				reg = <0xe8078 0x4>, <0xe807c 0x8>;
+				status = "okay";
+			};
+
+			coreclk: mvebu-sar@e8204 {
+				compatible = "marvell,armada-375-core-clock";
+				reg = <0xe8204 0x04>;
+				#clock-cells = <1>;
+			};
+
+			coredivclk: corediv-clock@e8250 {
+				compatible = "marvell,armada-375-corediv-clock";
+				reg = <0xe8250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie1: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 31>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-37xx.dtsi b/roms/u-boot/arch/arm/dts/armada-37xx.dtsi
new file mode 100644
index 000000000..2615b8c74
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-37xx.dtsi
@@ -0,0 +1,348 @@
+/*
+ * Device Tree Include file for Marvell Armada 37xx family of SoCs.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/comphy/comphy_data.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 37xx SoC";
+	compatible = "marvell,armada3700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		internal-regs {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 32M internal register @ 0xd000_0000 */
+			ranges = <0x0 0x0 0xd0000000 0x2000000>;
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-3700-uart";
+				reg = <0x12000 0x400>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			wdt: watchdog-timer@8300 {
+				compatible = "marvell,armada-3700-wdt";
+				reg = <0xd064 0x4>,
+				      <0x8300 0x40>;
+			};
+
+			nb_periph_clk: nb-periph-clk@13000 {
+				compatible = "marvell,armada-3700-periph-clock-nb";
+				reg = <0x13000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>;
+				#clock-cells = <1>;
+			};
+
+			sb_periph_clk: sb-periph-clk@18000 {
+				compatible = "marvell,armada-3700-periph-clock-sb";
+				reg = <0x18000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>;
+				#clock-cells = <1>;
+			};
+
+			tbg: tbg@13200 {
+				compatible = "marvell,armada-3700-tbg-clock";
+				reg = <0x13200 0x100>;
+				#clock-cells = <1>;
+			};
+
+			pinctrl_nb: pinctrl-nb@13800 {
+				compatible = "marvell,armada3710-nb-pinctrl",
+				"syscon", "simple-mfd";
+				reg = <0x13800 0x100>, <0x13C00 0x20>;
+				gpionb: gpionb {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_nb 0 0 36>;
+					gpio-controller;
+					interrupts =
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				};
+
+				spi_quad_pins: spi-quad-pins {
+					groups = "spi_quad";
+					function = "spi";
+				};
+
+				i2c1_pins: i2c1-pins {
+					groups = "i2c1";
+					function = "i2c";
+				};
+
+				i2c2_pins: i2c2-pins {
+					groups = "i2c2";
+					function = "i2c";
+				};
+
+				uart1_pins: uart1-pins {
+					groups = "uart1";
+					function = "uart";
+				};
+
+				uart2_pins: uart2-pins {
+					groups = "uart2";
+					function = "uart";
+				};
+
+				mmc_pins: mmc-pins {
+					groups = "emmc_nb";
+					function = "emmc";
+				};
+			};
+
+			pinctrl_sb: pinctrl-sb@18800 {
+				compatible = "marvell,armada3710-sb-pinctrl",
+				"syscon", "simple-mfd";
+				reg = <0x18800 0x100>, <0x18C00 0x20>;
+				gpiosb: gpiosb {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_sb 0 0 30>;
+					gpio-controller;
+					interrupts =
+					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				rgmii_pins: mii-pins {
+					groups = "rgmii";
+					function = "mii";
+				};
+
+				smi_pins: smi-pins {
+					groups = "smi";
+					function = "smi";
+				};
+
+				sdio_pins: sdio-pins {
+					groups = "sdio_sb";
+					function = "sdio";
+				};
+
+				pcie_pins: pcie-pins {
+					groups = "pcie1";
+					function = "gpio";
+				};
+			};
+
+			usb3: usb@58000 {
+				compatible = "marvell,armada3700-xhci",
+				"generic-xhci";
+				reg = <0x58000 0x4000>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			usb2: usb@5e000 {
+				compatible = "marvell,armada3700-ehci";
+				reg = <0x5e000 0x450>;
+				status = "disabled";
+			};
+
+			xor@60900 {
+				compatible = "marvell,armada-3700-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+
+				xor10 {
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			sdhci0: sdhci@d0000 {
+				compatible = "marvell,armada-3700-sdhci",
+				"marvell,sdhci-xenon";
+				reg = <0xd0000 0x300
+				       0x1e808 0x4>;
+				status = "disabled";
+			};
+
+			sdhci1: sdhci@d8000 {
+				compatible = "marvell,armada-3700-sdhci",
+				"marvell,sdhci-xenon";
+				reg = <0xd8000 0x300
+				       0x17808 0x4>;
+				status = "disabled";
+			};
+
+			sata: sata@e0000 {
+				compatible = "marvell,armada-3700-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@1d00000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x1d00000 0x10000>, /* GICD */
+				      <0x1d40000 0x40000>; /* GICR */
+			};
+
+			eth0: neta@30000 {
+				compatible = "marvell,armada-3700-neta";
+				reg = <0x30000 0x20>;
+				status = "disabled";
+			};
+
+			eth1: neta@40000 {
+				compatible = "marvell,armada-3700-neta";
+				reg = <0x40000 0x20>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11000 0x100>;
+				status = "disabled";
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-3700-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#clock-cells = <0>;
+				spi-max-frequency = <50000000>;
+				clocks = <&nb_periph_clk 7>;
+				status = "disabled";
+			};
+
+			comphy: comphy@18300 {
+				compatible = "marvell,mvebu-comphy", "marvell,comphy-armada-3700";
+				reg = <0x18300 0x28>,
+				      <0x1f300 0x3d000>;
+				mux-bitcount = <4>;
+				mux-lane-order = <1 0 2>;
+				max-lanes = <3>;
+			};
+		};
+
+		pcie0: pcie@d0070000 {
+			compatible = "marvell,armada-3700-pcie";
+			reg = <0 0xd0070000 0 0x20000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			status = "disabled";
+
+			bus-range = <0 0xff>;
+			/*
+			 * The 128 MiB address range [0xe8000000-0xf0000000] is
+			 * dedicated for PCIe and can be assigned to 8 windows
+			 * with size a power of two. Use one 64 KiB window for
+			 * IO at the end and the remaining seven windows
+			 * (totaling 127 MiB) for MEM.
+			 */
+			ranges = <0x82000000 0 0xe8000000
+				 0 0xe8000000 0 0x7f00000 /* Port 0 MEM */
+				 0x81000000 0 0xefff0000
+				 0 0xefff0000 0 0x10000>; /* Port 0 IO*/
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-380.dtsi b/roms/u-boot/arch/arm/dts/armada-380.dtsi
new file mode 100644
index 000000000..cff1269f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-380.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6810-pinctrl";
+			};
+		};
+
+		pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi
new file mode 100644
index 000000000..79b694cb8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&spi1 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&watchdog {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385-atl-x530.dts b/roms/u-boot/arch/arm/dts/armada-385-atl-x530.dts
new file mode 100644
index 000000000..0ebaa8bb3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385-atl-x530.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "armada-385-atl-x530.dtsi"
+#include "armada-385-atl-x530-u-boot.dtsi"
+
+/ {
+	model = "Allied Telesis x530";
+	compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	nand-protect {
+		compatible = "atl,nand-protect";
+		protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb-enable {
+		compatible = "atl,usb-enable";
+		enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	boot-board {
+		compatible = "atl,boot-board";
+		present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	phy-reset {
+		compatible = "atl,phy-reset";
+		reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	led-enable {
+		compatible = "atl,led-enable";
+		enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	led_7seg {
+		compatible = "atl,of-led-7seg";
+		segment-gpios = <
+			&led_7seg_gpio 0 0
+			&led_7seg_gpio 1 0
+			&led_7seg_gpio 2 0
+			&led_7seg_gpio 3 0
+			&led_7seg_gpio 4 0
+			&led_7seg_gpio 5 0
+			&led_7seg_gpio 6 0
+			&led_7seg_gpio 7 0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385-atl-x530.dtsi b/roms/u-boot/arch/arm/dts/armada-385-atl-x530.dtsi
new file mode 100644
index 000000000..09a04bdcc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385-atl-x530.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Allied Telesis x530";
+	compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	aliases {
+		spi1 = &spi1;
+		i2c0 = &i2c0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		pcie-mem-aperture = <0xa0000000 0x40000000>;
+	};
+
+	eco-button-interrupt {
+		compatible = "atl,eco-button-interrupt";
+		eco-button-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+	};
+
+	board-reset {
+		compatible = "atl,phy_reset";
+		/* Physical board layout of reset pin is active-low but for the
+		 * current driver we have to set it to active-high here.
+		 */
+		phy-reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+				 <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	phy-int {
+		compatible = "linux,uio-pdrv-genirq";
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_EDGE_BOTH>;
+	};
+
+	led-enable {
+		compatible = "atl,led-enable";
+		led-enable-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	};
+
+	led_7seg {
+		compatible = "atl,of-led-7seg";
+		segment-gpios = <
+			&led_7seg_gpio 0 0
+			&led_7seg_gpio 1 0
+			&led_7seg_gpio 2 0
+			&led_7seg_gpio 3 0
+			&led_7seg_gpio 4 0
+			&led_7seg_gpio 5 0
+			&led_7seg_gpio 6 0
+			&led_7seg_gpio 7 0>;
+	};
+
+	poe {
+		compatible = "atl,periph-poe";
+		poe-reset-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_BOTH>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&devbus_cs1 {
+	compatible = "marvell,mvebu-devbus";
+	status = "okay";
+
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+
+	nvs@0 {
+		status = "okay";
+
+		compatible = "mtd-ram";
+		reg = <0 0x00080000>;
+		bank-width = <1>;
+		label = "nvs";
+	};
+};
+
+&gpio0 {
+	poe-disable {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "poe-disable";
+	};
+};
+
+&gpio1 {
+	poe-mezz-reset {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "poe-mezz-reset";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	mux@71 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 { /* POE devices MUX */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			rng@3b {
+				compatible = "maxim,ds2476";
+				reg = <0x3b>;
+			};
+
+			hwmon@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+
+			hwmon@2d {
+				compatible = "adi,adt7476";
+				reg = <0x2d>;
+			};
+
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			rtc@68 {
+				compatible = "dallas,ds1340";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			led_7seg_gpio: gpio@20 {
+				compatible = "nxp,pca9554";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+			};
+
+			sfpgpio: gpio@27 { /* I2C to GPIO */
+				compatible = "nxp,pca9555";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x27>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			sfpmux: mux@77 { /* SFP I2C MUX */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,pca9544";
+				reg = <0x77>;
+				i2c-mux-idle-disconnect;
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00e80000>;
+			label = "unused";
+		};
+		partition@idprom {
+			reg = <0x00fc0000 0x00040000>;
+			label = "idprom";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <25000000>;
+};
+
+&nand_controller { /* 256 MB */
+	status = "okay";
+	num-cs = <1>;
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	marvell,nand-enable-arbiter;
+	nand-on-flash-bbt;
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385-atl-x530DP.dts b/roms/u-boot/arch/arm/dts/armada-385-atl-x530DP.dts
new file mode 100644
index 000000000..2d38bf50b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385-atl-x530DP.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "armada-385-atl-x530.dtsi"
+#include "armada-385-atl-x530-u-boot.dtsi"
+#include "armada-385-atl-x530DP.dtsi"
+
+/ {
+	model = "Allied Telesis x530DP";
+	compatible = "alliedtelesis,x530DP", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	nand-protect {
+		compatible = "atl,nand-protect";
+		protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb-enable {
+		compatible = "atl,usb-enable";
+		enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	boot-board {
+		compatible = "atl,boot-board";
+		present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	phy-reset {
+		compatible = "atl,phy-reset";
+		reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	led-enable {
+		compatible = "atl,led-enable";
+		enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	led_7seg {
+		compatible = "atl,of-led-7seg";
+		segment-gpios = <
+			&led_7seg_gpio 0 0
+			&led_7seg_gpio 1 0
+			&led_7seg_gpio 2 0
+			&led_7seg_gpio 3 0
+			&led_7seg_gpio 4 0
+			&led_7seg_gpio 5 0
+			&led_7seg_gpio 6 0
+			&led_7seg_gpio 7 0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385-atl-x530DP.dtsi b/roms/u-boot/arch/arm/dts/armada-385-atl-x530DP.dtsi
new file mode 100644
index 000000000..977eb4ee5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385-atl-x530DP.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&i2c0 {
+	mux@71 {
+		compatible = "nxp,pca9548";
+
+		i2c@1 {
+			hwmon@2c {
+				compatible = "ti,lm87";
+				reg = <0x2c>;
+			};
+
+			hwmon@2d {
+				compatible = "ti,lm87";
+				reg = <0x2d>;
+			};
+
+			hwmon@2e {
+				pwm-polarity = <1>;
+			};
+		};
+
+		psu_a_adapter: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		psu_b_adapter: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			misc_gpio: gpio@26 {
+				compatible = "nxp,pca9555";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x26>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+				status = "okay";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				psu_bank2 {
+					gpio-hog;
+					gpios = <0 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "psu-bank2";
+				};
+			};
+		};
+	};
+};
+
+/ {
+	psu_slot_a {
+		compatible = "atl,dts-overlay-gpio-psu-slot";
+		slot-name = "PSU Bay A";
+		board-index = <1>;
+		present-gpio = <&misc_gpio 1 GPIO_ACTIVE_LOW>;
+		output-ok-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&misc_gpio>;
+		interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
+		overlay = <&psu_a_overlay>;
+	};
+
+	psu_slot_b {
+		compatible = "atl,dts-overlay-gpio-psu-slot";
+		slot-name = "PSU Bay B";
+		board-index = <2>;
+		present-gpio = <&misc_gpio 2 GPIO_ACTIVE_LOW>;
+		output-ok-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&misc_gpio>;
+		interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+		overlay = <&psu_b_overlay>;
+	};
+
+	fan_slot_a {
+		compatible = "atl,fan05-slot";
+		slot-name = "Fan Bay A";
+		board-index = <3>;
+		present-gpio = <&misc_gpio 3 GPIO_ACTIVE_LOW>;
+		fault-gpio = <&misc_gpio 11 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&misc_gpio>;
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		overlay = <&fan_a_overlay>;
+	};
+};
+
+/ {
+	psu_a_overlay: psu_a {
+		fragment@0 {
+			target = <&psu_a_adapter>;
+			__overlay__ {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				psu@51 {
+					compatible = "atl,atl-pwr-gen2";
+					reg = <0x51>;
+					board-index = <1>;
+				};
+			};
+		};
+	};
+};
+
+/ {
+	psu_b_overlay: psu_b {
+		fragment@0 {
+			target = <&psu_b_adapter>;
+			__overlay__ {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				psu@51 {
+					compatible = "atl,atl-pwr-gen2";
+					reg = <0x51>;
+					board-index = <2>;
+				};
+			};
+		};
+	};
+};
+
+/ {
+	fan_a_overlay:fan_a {
+		fragment@1 {
+			target-path = "/";
+			__overlay__ {
+				fan@1 {
+					compatible = "atl,fan05";
+					board-index = <3>;
+					module-id-gpios =
+						<&misc_gpio 4 GPIO_ACTIVE_HIGH>,
+						<&misc_gpio 5 GPIO_ACTIVE_HIGH>,
+						<&misc_gpio 6 GPIO_ACTIVE_HIGH>;
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385-db-88f6820-amc.dts b/roms/u-boot/arch/arm/dts/armada-385-db-88f6820-amc.dts
new file mode 100644
index 000000000..59a425f6b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385-db-88f6820-amc.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 AMC";
+	compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth2;
+		i2c0 = &i2c0;
+		spi1 = &spi1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	u-boot,i2c-slave-addr = <0x0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Exported on the micro USB connector CON3
+	 * through an FTDI
+	 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+
+&eth0 {
+	pinctrl-names = "default";
+	/*
+	 * The Reference Clock 0 is used to provide a
+	 * clock to the PHY
+	 */
+	pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "sgmii";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	marvell,nand-keep-config;
+	marvell,nand-enable-arbiter;
+	nand-on-flash-bbt;
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <20000000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
new file mode 100644
index 000000000..af0655daa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
+ */
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2cmux;
+		spi0 = &spi0;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+
+	i2cmux: i2cmux@70 {
+		u-boot,dm-pre-reloc;
+
+		i2c@0 {
+			u-boot,dm-pre-reloc;
+		};
+
+		i2c@1 {
+			u-boot,dm-pre-reloc;
+		};
+
+		i2c@5 {
+			u-boot,dm-pre-reloc;
+
+			/* ATSHA204A at address 0x64 */
+			atsha204a@64 {
+				u-boot,dm-pre-reloc;
+				compatible = "atmel,atsha204a";
+				reg = <0x64>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-nor@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385-turris-omnia.dts b/roms/u-boot/arch/arm/dts/armada-385-turris-omnia.dts
new file mode 100644
index 000000000..5511c8484
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385-turris-omnia.dts
@@ -0,0 +1,392 @@
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Turris Omnia";
+	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* USB part of the PCIe2/USB 2.0 port */
+			usb@58000 {
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				status = "okay";
+
+				bus-width = <8>;
+				no-1-8-v;
+				non-removable;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+/* Connected to 88E6176 switch, port 6 */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* Connected to 88E6176 switch, port 5 */
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* WAN port */
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	i2cmux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		status = "okay";
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* STM32F0 command interface at address 0x2a */
+			/* leds device (in STM32F0) at address 0x2b */
+
+			eeprom@54 {
+				compatible = "at,24c64";
+				reg = <0x54>;
+
+				/* The EEPROM contains data for bootloader.
+				 * Contents:
+				 * 	struct omnia_eeprom {
+				 * 		u32 magic; (=0x0341a034 in LE)
+				 *		u32 ramsize; (in GiB)
+				 * 		char regdomain[4];
+				 * 		u32 crc32;
+				 * 	};
+				 */
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* routed to PCIe0/mSATA connector (CN7A) */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* routed to PCIe1/USB2 connector (CN61A) */
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* routed to PCIe2 connector (CN62A) */
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* routed to SFP+ */
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* ATSHA204A at address 0x64 */
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* exposed on pin header */
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcawan: gpio@71 {
+				/*
+				 * GPIO expander for SFP+ signals and
+				 * and phy irq
+				 */
+				compatible = "nxp,pca9538";
+				reg = <0x71>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pcawan_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy1: phy@1 {
+		status = "okay";
+		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+
+		/* irq is connected to &pcawan pin 7 */
+	};
+
+	/* Switch MV88E6176 at address 0x10 */
+	switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dsa,member = <0 0>;
+
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			ports@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			ports@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ports@3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			ports@4 {
+				reg = <4>;
+				label = "lan4";
+			};
+
+			ports@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			/* port 6 is connected to eth0 */
+		};
+	};
+};
+
+&pinctrl {
+	pcawan_pins: pcawan-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	spi0cs0_pins: spi0cs0-pins {
+		marvell,pins = "mpp25";
+		marvell,function = "spi0";
+	};
+
+	spi0cs1_pins: spi0cs1-pins {
+		marvell,pins = "mpp26";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+	status = "okay";
+
+	spi-nor@0 {
+		compatible = "spansion,s25fl164k", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x00100000>;
+				label = "U-Boot";
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x00700000>;
+				label = "Rescue system";
+			};
+		};
+	};
+
+	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+};
+
+&uart0 {
+	/* Pin header CN10 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	/* Pin header CN11 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-385.dtsi b/roms/u-boot/arch/arm/dts/armada-385.dtsi
new file mode 100644
index 000000000..f0022d10c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-385.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		pciec: pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-388-clearfog-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-388-clearfog-u-boot.dtsi
new file mode 100644
index 000000000..20f5c8fb8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-388-clearfog-u-boot.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&spi1 {
+	u-boot,dm-spl;
+
+	spi-flash@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdhci {
+	u-boot,dm-spl;
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&ahci0 {
+	u-boot,dm-spl;
+};
+
+&ahci1 {
+	u-boot,dm-spl;
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+
+	eeprom@52 {
+		u-boot,dm-spl;
+	};
+
+	eeprom@53 {
+		u-boot,dm-spl;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-388-clearfog.dts b/roms/u-boot/arch/arm/dts/armada-388-clearfog.dts
new file mode 100644
index 000000000..e4164f49b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-388-clearfog.dts
@@ -0,0 +1,381 @@
+/*
+ * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board.  Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "SolidRun Clearfog A1";
+	compatible = "solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+		spi1 = &spi1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	soc {
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+
+			sata@a8000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sata@e0000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&microsom_sdhci_pins
+					     &clearfog_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			serial@12100 {
+				/* mikrobus uart */
+				pinctrl-0 = <&mikro_uart_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				/* CON7, USB-A port on back of device */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0. CONN3, nearest power. */
+				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 2, Lane 0. CONN2, nearest CPU. */
+				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&w25q32 {
+	status = "okay";
+};
+
+&eth1 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&eth2 {
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/*
+	 * PCA9655 GPIO expander, up to 1MHz clock.
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-CON2 PERST#
+	 *  3-CON3 W_DISABLE
+	 *  4-CON2 CLKREQ#
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-CON2 W_DISABLE
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	expander0: gpio-expander@20 {
+		/*
+		 * This is how it should be:
+		 * compatible = "onnn,pca9655",
+		 *	 "nxp,pca9555";
+		 * but you can't do this because of
+		 * the way I2C works.
+		 */
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+
+		pcie1_0_clkreq {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie1.0-clkreq";
+		};
+		pcie1_0_w_disable {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie1.0-w-disable";
+		};
+		pcie2_0_clkreq {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie2.0-clkreq";
+		};
+		pcie2_0_w_disable {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie2.0-w-disable";
+		};
+		usb3_ilimit {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+		usb3_power {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "usb3-power";
+		};
+		m2_devslp {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	mikrobus_adc: mcp3021@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * Routed to SFP, mikrobus, and PCIe.
+	 * SFP limits this to 100kHz, and requires
+	 *  an AT24C01A/02/04 with address pins tied
+	 *  low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C
+	 *  bus being present.
+	 * PCIe uses ARP to assign addresses, or
+	 *  0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&clearfog_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl {
+	clearfog_i2c1_pins: i2c1-pins {
+		/* SFP, PCIe, mSATA, mikrobus */
+		marvell,pins = "mpp26", "mpp27";
+		marvell,function = "i2c1";
+	};
+	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+		marvell,pins = "mpp20";
+		marvell,function = "gpio";
+	};
+	clearfog_spi1_cs_pins: spi1-cs-pins {
+		marvell,pins = "mpp55";
+		marvell,function = "spi1";
+	};
+	mikro_pins: mikro-pins {
+		/* int: mpp22 rst: mpp29 */
+		marvell,pins = "mpp22", "mpp29";
+		marvell,function = "gpio";
+	};
+	mikro_spi_pins: mikro-spi-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "spi1";
+	};
+	mikro_uart_pins: mikro-uart-pins {
+		marvell,pins = "mpp24", "mpp25";
+		marvell,function = "ua1";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
++#define A38x_CUSTOMER_BOARD_1_MPP16_23         0x00400011
+MPP18: gpio		? (pca9655 int?)
+MPP19: gpio		? (clkreq?)
+MPP20: gpio		? (sd0 detect)
+MPP21: sd0:cmd		x sd0
+MPP22: gpio		x mikro int
+MPP23: gpio		x switch irq
++#define A38x_CUSTOMER_BOARD_1_MPP24_31         0x22043333
+MPP24: ua1:rxd		x mikro rx
+MPP25: ua1:txd		x mikro tx
+MPP26: i2c1:sck		x mikro sck
+MPP27: i2c1:sda		x mikro sda
+MPP28: sd0:clk		x sd0
+MPP29: gpio		x mikro rst
+MPP30: ge1:txd2		? (config)
+MPP31: ge1:txd3		? (config)
++#define A38x_CUSTOMER_BOARD_1_MPP32_39         0x44400002
+MPP32: ge1:txctl	? (unused)
+MPP33: gpio		? (pic_com0)
+MPP34: gpio		x rear button (pic_com1)
+MPP35: gpio		? (pic_com2)
+MPP36: gpio		? (unused)
+MPP37: sd0:d3		x sd0
+MPP38: sd0:d0		x sd0
+MPP39: sd0:d1		x sd0
++#define A38x_CUSTOMER_BOARD_1_MPP40_47         0x41144004
+MPP40: sd0:d2		x sd0
+MPP41: gpio		x switch reset
+MPP42: gpio		? sw1-1
+MPP43: spi1:cs2		x mikro cs
+MPP44: sata3:prsnt	? (unused)
+MPP45: ref:clk_out0	?
+MPP46: ref:clk_out1	x switch clk
+MPP47: 4		? (unused)
++#define A38x_CUSTOMER_BOARD_1_MPP48_55         0x40333333
+MPP48: tdm:pclk
+MPP49: tdm:fsync
+MPP50: tdm:drx
+MPP51: tdm:dtx
+MPP52: tdm:int
+MPP53: tdm:rst
+MPP54: gpio		? (pwm)
+MPP55: spi1:cs1		x slic
++#define A38x_CUSTOMER_BOARD_1_MPP56_63         0x00004444
+MPP56: spi1:mosi	x mikro mosi
+MPP57: spi1:sck		x mikro sck
+MPP58: spi1:miso	x mikro miso
+MPP59: spi1:cs0		x w25q32
+*/
diff --git a/roms/u-boot/arch/arm/dts/armada-388-gp.dts b/roms/u-boot/arch/arm/dts/armada-388-gp.dts
new file mode 100644
index 000000000..d59aa5f23
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-388-gp.dts
@@ -0,0 +1,424 @@
+/*
+ * Device Tree file for Marvell Armada 385 development board
+ * (RD-88F6820-GP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 GP";
+	compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				spi-flash@0 {
+					u-boot,dm-pre-reloc;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128", "jedec,spi-nor";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+					m25p,fast-read;
+				};
+			};
+
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+				/*
+				 * The EEPROM located at adresse 54 is needed
+				 * for the boot - DO NOT ERASE IT -
+				 */
+
+				expander0: pca9555@20 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x20>;
+				};
+
+				expander1: pca9555@21 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x21>;
+				};
+
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON16
+				 * through an FTDI
+				 */
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			/* GE1 CON15 */
+			ethernet@30000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* CON4 */
+			usb@58000 {
+				vcc-supply = <&reg_usb2_0_vbus>;
+				status = "okay";
+			};
+
+			/* GE0 CON1 */
+			ethernet@70000 {
+				pinctrl-names = "default";
+				/*
+				 * The Reference Clock 0 is used to provide a
+				 * clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata1>;
+				};
+			};
+
+			sata@e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata2>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata3>;
+				};
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			/* CON5 */
+			usb3@f0000 {
+				vcc-supply = <&reg_usb2_1_vbus>;
+				status = "okay";
+			};
+
+			/* CON7 */
+			usb3@f8000 {
+				vcc-supply = <&reg_usb3_vbus>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/*
+			 * The two other PCIe units are accessible
+			 * through mini PCIe slot on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <	 0 0
+					      3000 1>;
+		};
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_0_vbus: v5-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_1_vbus: v5-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_1_vbus: v5-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		enable-active-high;
+		regulator-always-on;
+
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_sata1: pwr-sata1 {
+		regulator-name = "pwr_en_sata1";
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata1: v5-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_12v_sata1: v12-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_sata2: pwr-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata2";
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata2: v5-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_12v_sata2: v12-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata2";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_sata3: pwr-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata3";
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata3: v5-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata3>;
+	};
+
+	reg_12v_sata3: v12-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata3";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata3>;
+	};
+};
+
+&pinctrl {
+	pca0_pins: pca0_pins {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-388-helios4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-388-helios4-u-boot.dtsi
new file mode 100644
index 000000000..1047c1af2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-388-helios4-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&eth0 {
+	phy-reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+};
+
+&spi1 {
+	u-boot,dm-spl;
+	spi-flash@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&w25q32 {
+	u-boot,dm-spl;
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&ahci0 {
+	u-boot,dm-spl;
+};
+
+&ahci1 {
+	u-boot,dm-spl;
+};
+
+&sdhci {
+	u-boot,dm-spl;
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+
+	eeprom@52 {
+		u-boot,dm-spl;
+	};
+
+	eeprom@53 {
+		u-boot,dm-spl;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-388-helios4.dts b/roms/u-boot/arch/arm/dts/armada-388-helios4.dts
new file mode 100644
index 000000000..cbc296a46
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-388-helios4.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Helios4
+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
+ *
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "Helios4";
+	compatible = "kobol,helios4", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC address */
+		ethernet1 = &eth0;
+		spi1 = &spi1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_brick_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_hdd: regulator-5v-hdd {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HDD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_usb: regulator-5v-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB-PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_12v>;
+	};
+
+	system-leds {
+		compatible = "gpio-leds";
+		status-led {
+			label = "helios4:green:status";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		fault-led {
+			label = "helios4:red:fault";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	io-leds {
+		compatible = "gpio-leds";
+		sata1-led {
+			label = "helios4:green:ata1";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata1";
+			default-state = "off";
+		};
+		sata2-led {
+			label = "helios4:green:ata2";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata2";
+			default-state = "off";
+		};
+		sata3-led {
+			label = "helios4:green:ata3";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata3";
+			default-state = "off";
+		};
+		sata4-led {
+			label = "helios4:green:ata4";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata4";
+			default-state = "off";
+		};
+		usb-led {
+			label = "helios4:green:usb";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usb-host";
+			default-state = "off";
+		};
+	};
+
+	fan1: j10-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+	};
+
+	fan2: j17-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+	};
+
+	usb2_phy: usb2-phy {
+		compatible = "usb-nop-xceiv";
+		vbus-regulator = <&reg_5p0v_usb>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc {
+		internal-regs {
+			i2c@11000 {
+				/*
+				 * PCA9655 GPIO expander, up to 1MHz clock.
+				 *  0-Board Revision bit 0 #
+				 *  1-Board Revision bit 1 #
+				 *  5-USB3 overcurrent
+				 *  6-USB3 power
+				 */
+				expander0: gpio-expander@20 {
+					/*
+					 * This is how it should be:
+					 * compatible = "onnn,pca9655",
+					 *	 "nxp,pca9555";
+					 * but you can't do this because of
+					 * the way I2C works.
+					 */
+					compatible = "nxp,pca9555";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x20>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+
+					board_rev_bit_0 {
+						gpio-hog;
+						gpios = <0 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-0";
+					};
+					board_rev_bit_1 {
+						gpio-hog;
+						gpios = <1 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-1";
+					};
+					usb3_ilimit {
+						gpio-hog;
+						gpios = <5 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "usb-overcurrent-status";
+					};
+				};
+
+				temp_sensor: temp@4c {
+					compatible = "ti,lm75";
+					reg = <0x4c>;
+					vcc-supply = <&reg_3p3v>;
+				};
+			};
+
+			i2c@11100 {
+				/*
+				 * External I2C Bus for user peripheral
+				 */
+				clock-frequency = <400000>;
+				pinctrl-0 = <&helios_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@e0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			spi@10680 {
+				pinctrl-0 = <&spi1_pins
+					     &microsom_spi1_cs_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&helios_sdhci_pins
+					     &helios_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				usb-phy = <&usb2_phy>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				pca0_pins: pca0-pins {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+				microsom_phy0_int_pins: microsom-phy0-int-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+				helios_i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+				helios_sdhci_cd_pins: helios-sdhci-cd-pins {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+				helios_sdhci_pins: helios-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+				helios_led_pins: helios-led-pins {
+					marvell,pins = "mpp24", "mpp25",
+						       "mpp49", "mpp50",
+						       "mpp52", "mpp53",
+						       "mpp54";
+					marvell,function = "gpio";
+				};
+				helios_fan_pins: helios-fan-pins {
+					marvell,pins = "mpp41", "mpp43",
+						       "mpp48", "mpp55";
+					marvell,function = "gpio";
+				};
+				microsom_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+			};
+		};
+	};
+};
+
+&w25q32 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-388.dtsi b/roms/u-boot/arch/arm/dts/armada-388.dtsi
new file mode 100644
index 000000000..f3a020ff5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-388.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 388 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * The main difference with the Armada 385 is that the 388 can handle two more
+ * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
+ * property and the name of the SoC, and add the second SATA host which control
+ * the 2 other ports.
+ */
+
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 388 family SoC";
+	compatible = "marvell,armada388", "marvell,armada385",
+		"marvell,armada380";
+	soc {
+		internal-regs {
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6828-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-38x-controlcenterdc.dts b/roms/u-boot/arch/arm/dts/armada-38x-controlcenterdc.dts
new file mode 100644
index 000000000..5063a798d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-38x-controlcenterdc.dts
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Guntermann & Drunck ControlCenter-Compact board
+ *
+ * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
+ *
+ * based on the Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820), which is
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+
+#include "armada-388.dtsi"
+
+&gpio0 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+/ {
+	model = "Controlcenter Digital Compact";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS1,115200 earlyprintk";
+		stdout-path = "/soc/internal-regs/serial@12100";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet2 = &eth2;
+		mdio-gpio0 = &MDIO0;
+		mdio-gpio1 = &MDIO1;
+		mdio-gpio2 = &MDIO2;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		i2c0 = &I2C0;
+		i2c1 = &I2C1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	clocks {
+		sc16isclk: sc16isclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <11059200>;
+		};
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			I2C0: i2c@11000 {
+				status = "okay";
+				clock-frequency = <1000000>;
+				u-boot,dm-pre-reloc;
+				PCA21: pca9698@21 {
+					compatible = "nxp,pca9698";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+				PCA22: pca9698@22 {
+					compatible = "nxp,pca9698";
+					u-boot,dm-pre-reloc;
+					reg = <0x22>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+				PCA23: pca9698@23 {
+					compatible = "nxp,pca9698";
+					reg = <0x23>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+				PCA24: pca9698@24 {
+					compatible = "nxp,pca9698";
+					reg = <0x24>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+				PCA25: pca9698@25 {
+					compatible = "nxp,pca9698";
+					reg = <0x25>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+				PCA26: pca9698@26 {
+					compatible = "nxp,pca9698";
+					reg = <0x26>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+
+			I2C1: i2c@11100 {
+				status = "okay";
+				clock-frequency = <400000>;
+				at97sc3205t@29 {
+					compatible = "atmel,at97sc3204t";
+					reg = <0x29>;
+					u-boot,i2c-offset-len = <0>;
+				};
+				emc2305@2d {
+					compatible = "smsc,emc2305";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2d>;
+					fan@0 {
+						reg = <0>;
+					};
+					fan@1 {
+						reg = <1>;
+					};
+					fan@2 {
+						reg = <2>;
+					};
+					fan@3 {
+						reg = <3>;
+					};
+					fan@4 {
+						reg = <4>;
+					};
+				};
+				lm77@48 {
+					compatible = "national,lm77";
+					reg = <0x48>;
+				};
+				ads1015@49 {
+					compatible = "ti,ads1015";
+					reg = <0x49>;
+				};
+				lm77@4a {
+					compatible = "national,lm77";
+					reg = <0x4a>;
+				};
+				ads1015@4b {
+					compatible = "ti,ads1015";
+					reg = <0x4b>;
+				};
+				emc2305@4c {
+					compatible = "smsc,emc2305";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4c>;
+					fan@0 {
+						reg = <0>;
+					};
+					fan@1 {
+						reg = <1>;
+					};
+					fan@2 {
+						reg = <2>;
+					};
+					fan@3 {
+						reg = <3>;
+					};
+					fan@4 {
+						reg = <4>;
+					};
+				};
+				at24c512@54 {
+					compatible = "atmel,24c512";
+					reg = <0x54>;
+					u-boot,i2c-offset-len = <2>;
+				};
+				ds1339@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			serial@12100 {
+				status = "okay";
+			};
+
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+
+			usb@58000 {
+				status = "ok";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <0>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				broken-cd;
+				wp-inverted;
+				bus-width = <4>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@3,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		MDIO0: mdio0 {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = < /*MDC*/ &gpio0 13 0
+				  /*MDIO*/ &gpio0 14 0>;
+			mv88e1240@0 {
+				reg = <0x0>;
+			};
+			mv88e1240@1 {
+				reg = <0x1>;
+			};
+			mv88e1240@2 {
+				reg = <0x2>;
+			};
+			mv88e1240@3 {
+				reg = <0x3>;
+			};
+			mv88e1240@4 {
+				reg = <0x4>;
+			};
+			mv88e1240@5 {
+				reg = <0x5>;
+			};
+			mv88e1240@6 {
+				reg = <0x6>;
+			};
+			mv88e1240@7 {
+				reg = <0x7>;
+			};
+			mv88e1240@8 {
+				reg = <0x8>;
+			};
+			mv88e1240@9 {
+				reg = <0x9>;
+			};
+			mv88e1240@a {
+				reg = <0xa>;
+			};
+			mv88e1240@b {
+				reg = <0xb>;
+			};
+			mv88e1240@c {
+				reg = <0xc>;
+			};
+			mv88e1240@d {
+				reg = <0xd>;
+			};
+			mv88e1240@e {
+				reg = <0xe>;
+			};
+			mv88e1240@f {
+				reg = <0xf>;
+			};
+			mv88e1240@10 {
+				reg = <0x10>;
+			};
+			mv88e1240@11 {
+				reg = <0x11>;
+			};
+			mv88e1240@12 {
+				reg = <0x12>;
+			};
+			mv88e1240@13 {
+				reg = <0x13>;
+			};
+			mv88e1240@14 {
+				reg = <0x14>;
+			};
+			mv88e1240@15 {
+				reg = <0x15>;
+			};
+			mv88e1240@16 {
+				reg = <0x16>;
+			};
+			mv88e1240@17 {
+				reg = <0x17>;
+			};
+			mv88e1240@18 {
+				reg = <0x18>;
+			};
+			mv88e1240@19 {
+				reg = <0x19>;
+			};
+			mv88e1240@1a {
+				reg = <0x1a>;
+			};
+			mv88e1240@1b {
+				reg = <0x1b>;
+			};
+			mv88e1240@1c {
+				reg = <0x1c>;
+			};
+			mv88e1240@1d {
+				reg = <0x1d>;
+			};
+			mv88e1240@1e {
+				reg = <0x1e>;
+			};
+			mv88e1240@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		MDIO1: mdio1 {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = < /*MDC*/ &gpio0 25 0
+				  /*MDIO*/ &gpio1 13 0>;
+			mv88e1240@0 {
+				reg = <0x0>;
+			};
+			mv88e1240@1 {
+				reg = <0x1>;
+			};
+			mv88e1240@2 {
+				reg = <0x2>;
+			};
+			mv88e1240@3 {
+				reg = <0x3>;
+			};
+			mv88e1240@4 {
+				reg = <0x4>;
+			};
+			mv88e1240@5 {
+				reg = <0x5>;
+			};
+			mv88e1240@6 {
+				reg = <0x6>;
+			};
+			mv88e1240@7 {
+				reg = <0x7>;
+			};
+			mv88e1240@8 {
+				reg = <0x8>;
+			};
+			mv88e1240@9 {
+				reg = <0x9>;
+			};
+			mv88e1240@a {
+				reg = <0xa>;
+			};
+			mv88e1240@b {
+				reg = <0xb>;
+			};
+			mv88e1240@c {
+				reg = <0xc>;
+			};
+			mv88e1240@d {
+				reg = <0xd>;
+			};
+			mv88e1240@e {
+				reg = <0xe>;
+			};
+			mv88e1240@f {
+				reg = <0xf>;
+			};
+			mv88e1240@10 {
+				reg = <0x10>;
+			};
+			mv88e1240@11 {
+				reg = <0x11>;
+			};
+			mv88e1240@12 {
+				reg = <0x12>;
+			};
+			mv88e1240@13 {
+				reg = <0x13>;
+			};
+			mv88e1240@14 {
+				reg = <0x14>;
+			};
+			mv88e1240@15 {
+				reg = <0x15>;
+			};
+			mv88e1240@16 {
+				reg = <0x16>;
+			};
+			mv88e1240@17 {
+				reg = <0x17>;
+			};
+			mv88e1240@18 {
+				reg = <0x18>;
+			};
+			mv88e1240@19 {
+				reg = <0x19>;
+			};
+			mv88e1240@1a {
+				reg = <0x1a>;
+			};
+			mv88e1240@1b {
+				reg = <0x1b>;
+			};
+			mv88e1240@1c {
+				reg = <0x1c>;
+			};
+			mv88e1240@1d {
+				reg = <0x1d>;
+			};
+			mv88e1240@1e {
+				reg = <0x1e>;
+			};
+			mv88e1240@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		MDIO2: mdio2 {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = < /*MDC*/ &gpio1 14 0
+				  /*MDIO*/ &gpio0 24 0>;
+			mv88e1240@0 {
+				reg = <0x0>;
+			};
+			mv88e1240@1 {
+				reg = <0x1>;
+			};
+			mv88e1240@2 {
+				reg = <0x2>;
+			};
+			mv88e1240@3 {
+				reg = <0x3>;
+			};
+			mv88e1240@4 {
+				reg = <0x4>;
+			};
+			mv88e1240@5 {
+				reg = <0x5>;
+			};
+			mv88e1240@6 {
+				reg = <0x6>;
+			};
+			mv88e1240@7 {
+				reg = <0x7>;
+			};
+			mv88e1240@8 {
+				reg = <0x8>;
+			};
+			mv88e1240@9 {
+				reg = <0x9>;
+			};
+			mv88e1240@a {
+				reg = <0xa>;
+			};
+			mv88e1240@b {
+				reg = <0xb>;
+			};
+			mv88e1240@c {
+				reg = <0xc>;
+			};
+			mv88e1240@d {
+				reg = <0xd>;
+			};
+			mv88e1240@e {
+				reg = <0xe>;
+			};
+			mv88e1240@f {
+				reg = <0xf>;
+			};
+			mv88e1240@10 {
+				reg = <0x10>;
+			};
+			mv88e1240@11 {
+				reg = <0x11>;
+			};
+			mv88e1240@12 {
+				reg = <0x12>;
+			};
+			mv88e1240@13 {
+				reg = <0x13>;
+			};
+			mv88e1240@14 {
+				reg = <0x14>;
+			};
+			mv88e1240@15 {
+				reg = <0x15>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		finder_led {
+			label = "finder-led";
+			gpios = <&PCA22 25 0>;
+		};
+
+		status_led {
+			label = "status-led";
+			gpios = <&gpio0 29 0>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	sc16is741: sc16is741@0 {
+		compatible = "nxp,sc16is741";
+		reg = <0>;
+		clocks = <&sc16isclk>;
+		spi-max-frequency = <4000000>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q016a", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+	spi-flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <1>; /* Chip select 1 */
+		spi-max-frequency = <108000000>;
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-38x-solidrun-microsom.dtsi b/roms/u-boot/arch/arm/dts/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 000000000..9bbeafc53
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ *  Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board.  Things will change, don't expect this file to
+ * remain compatible info the future.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&mdio {
+	/*
+	 * Add the phy clock here, so the phy can be accessed to read its
+	 * IDs prior to binding with the driver.
+	 */
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
+	pinctrl-names = "default";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	microsom_phy_clk_pins: microsom-phy-clk-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "ref";
+	};
+	/* Optional eMMC */
+	microsom_sdhci_pins: microsom-sdhci-pins {
+		marvell,pins = "mpp21", "mpp28", "mpp37",
+			       "mpp38", "mpp39", "mpp40";
+		marvell,function = "sd0";
+	};
+};
+
+&spi1 {
+	/* The microsom has an optional W25Q32 on board, connected to CS0 */
+	pinctrl-0 = <&spi1_pins>;
+
+	w25q32: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "disabled";
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&i2c0 {
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-38x.dtsi b/roms/u-boot/arch/arm/dts/armada-38x.dtsi
new file mode 100644
index 000000000..72c49beb7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-38x.dtsi
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 38x family of SoCs.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 38x family SoC";
+	compatible = "marvell,armada380";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		compatible = "marvell,armada380-mbus", "simple-bus";
+		u-boot,dm-pre-reloc;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs3: devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c200 {
+				compatible = "arm,cortex-a9-global-timer";
+				reg = <0xc200 0x20>;
+				interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@18000 {
+				reg = <0x18000 0x20>;
+
+				ge0_rgmii_pins: ge-rgmii-pins-0 {
+					marvell,pins = "mpp6", "mpp7", "mpp8",
+						       "mpp9", "mpp10", "mpp11",
+						       "mpp12", "mpp13", "mpp14",
+						       "mpp15", "mpp16", "mpp17";
+					marvell,function = "ge0";
+				};
+
+				ge1_rgmii_pins: ge-rgmii-pins-1 {
+					marvell,pins = "mpp21", "mpp27", "mpp28",
+						       "mpp29", "mpp30", "mpp31",
+						       "mpp32", "mpp37", "mpp38",
+						       "mpp39", "mpp40", "mpp41";
+					marvell,function = "ge1";
+				};
+
+				i2c0_pins: i2c-pins-0 {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				mdio_pins: mdio-pins {
+					marvell,pins = "mpp4", "mpp5";
+					marvell,function = "ge";
+				};
+
+				ref_clk0_pins: ref-clk-pins-0 {
+					marvell,pins = "mpp45";
+					marvell,function = "ref";
+				};
+
+				ref_clk1_pins: ref-clk-pins-1 {
+					marvell,pins = "mpp46";
+					marvell,function = "ref";
+				};
+
+				spi0_pins: spi-pins-0 {
+					marvell,pins = "mpp22", "mpp23", "mpp24",
+						       "mpp25";
+					marvell,function = "spi0";
+				};
+
+				spi1_pins: spi-pins-1 {
+					marvell,pins = "mpp56", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "spi1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23",
+						       "mpp33", "mpp38", "mpp28",
+						       "mpp40", "mpp42", "mpp35",
+						       "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+
+				nand_rb: nand-rb {
+					marvell,pins = "mpp41";
+					marvell,function = "nand";
+				};
+
+				uart0_pins: uart-pins-0 {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart-pins-1 {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				sdhci_pins: sdhci-pins {
+					marvell,pins = "mpp48", "mpp49", "mpp50",
+						       "mpp52", "mpp53", "mpp54",
+						       "mpp55", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "sd0";
+				};
+
+				sata0_pins: sata-pins-0 {
+					marvell,pins = "mpp20";
+					marvell,function = "sata0";
+				};
+
+				sata1_pins: sata-pins-1 {
+					marvell,pins = "mpp19";
+					marvell,function = "sata1";
+				};
+
+				sata2_pins: sata-pins-2 {
+					marvell,pins = "mpp47";
+					marvell,function = "sata2";
+				};
+
+				sata3_pins: sata-pins-3 {
+					marvell,pins = "mpp44";
+					marvell,function = "sata3";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-380-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-380-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-380-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog: watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherencyfab: coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu: pmsu@22000 {
+				compatible = "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			/*
+			 * As a special exception to the "order by
+			 * register address" rule, the eth0 node is
+			 * placed here to ensure that it gets
+			 * registered as the first interface, since
+			 * the network subsystem doesn't allow naming
+			 * interfaces using DT aliases. Without this,
+			 * the ordering of interfaces is different
+			 * from the one used in U-Boot and the
+			 * labeling of interfaces on the boards, which
+			 * is very confusing for users.
+			 */
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				tx-csum-limit = <9800>;
+				status = "disabled";
+			};
+
+			eth1: ethernet@30000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x30000 0x4000>;
+				interrupts-extended = <&mpic 10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			eth2: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts-extended = <&mpic 12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb0: usb@58000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x58000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			xor0: xor@60800 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			mdio: mdio@72004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-38x-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 23>, <&gateclk 21>,
+					 <&gateclk 14>, <&gateclk 16>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			rtc: rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ahci0: sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			bm: bm@c8000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc8000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			ahci1: sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal: thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4070 0x8>;
+				status = "okay";
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand","marvell,mvebu-pxa3xx-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci: sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			usb3_0: usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			usb3_1: usb3@f8000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
+			clocks = <&gateclk 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 1 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-7040-db-nand.dts b/roms/u-boot/arch/arm/dts/armada-7040-db-nand.dts
new file mode 100644
index 000000000..ccf470b31
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-7040-db-nand.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ * Boot device: NAND, 0xE (SW3)
+ */
+
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Marvell Armada 7040 DB board with NAND";
+	compatible = "marvell,armada7040-db-nand", "marvell,armada7040-db",
+		     "marvell,armada7040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		spi0 = &cp0_spi1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&ap_pinctl {
+	   /* MPP Bus:
+	    * SDIO  [0-5]
+	    * UART0 [11,19]
+	    */
+		  /* 0   1   2   3   4   5   6   7   8   9 */
+	pin-func = < 0x1 0x1 0x1 0x1 0x1 0x1 0x0 0x0 0x0 0x0
+		     0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x3 >;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+
+&cp0_pcie2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_pinctl {
+		/* MPP Bus:
+		 * AUDIO   [0-5]
+                 * GBE     [6-11]
+		 * SS_PWDN [12]
+		 * NF_RBn  [13]
+                 * GPIO    [14]
+		 * DEV_BUS [15-27]
+		 * SATA1   [28]
+		 * UART0   [29-30]
+		 * MSS_VTT_EN [31]
+		 * SMI	   [32,34]
+		 * XSMI    [35-36]
+		 * I2C	   [37-38]
+		 * RGMII1  [44-55]
+		 * SD	   [56-61]
+		 * GPIO    [62]
+		 */
+		 /*   0   1   2   3   4   5   6   7   8   9 */
+	 pin-func = < 0x2 0x2 0x2 0x2 0x2 0x2 0x3 0x3 0x3 0x3
+		      0x3 0x3 0x0 0x2 0x0 0x1 0x1 0x1 0x1 0x1
+		      0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x9 0xa
+		      0xa 0x0 0x7 0x0 0x7 0x7 0x7 0x2 0x2 0x0
+		      0x0 0x0 0x0 0x0 0x1 0x1 0x1 0x1 0x1 0x1
+		      0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe
+		      0xe 0xe 0x0>;
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	status = "disabled";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp0_comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_SGMII0>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+
+	phy3 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy4 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy5 {
+		phy-type = <COMPHY_TYPE_PEX2>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+};
+
+&cp0_nand {
+	status = "okay";
+};
+
+&cp0_utmi0 {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "okay";
+};
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cp0_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-7040-db.dts b/roms/u-boot/arch/arm/dts/armada-7040-db.dts
new file mode 100644
index 000000000..b158f9234
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-7040-db.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ * Boot device: SPI NOR, 0x32 (SW3)
+ */
+
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Marvell Armada 7040 DB board";
+	compatible = "marvell,armada7040-db", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		spi0 = &cp0_spi1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&ap_pinctl {
+	   /* MPP Bus:
+	    * SDIO  [0-5]
+	    * UART0 [11,19]
+	    */
+		  /* 0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 0 0 0 0
+		     0 3 0 0 0 0 0 0 0 3 >;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+
+&cp0_pcie2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_pinctl {
+		/* MPP Bus:
+		 * TDM	 [0-11]
+		 * SPI   [13-16]
+		 * SATA1 [28]
+		 * UART0 [29-30]
+		 * SMI	 [32,34]
+		 * XSMI  [35-36]
+		 * I2C	 [37-38]
+		 * RGMII1[44-55]
+		 * SD	 [56-62]
+		 */
+		/*   0   1   2   3   4   5   6   7   8   9 */
+	pin-func = < 4   4   4   4   4   4   4   4   4   4
+		     4   4   0   3   3   3   3   0   0   0
+		     0   0   0   0   0   0   0   0   9   0xA
+		     0xA 0   7   0   7   7   7   2   2   0
+		     0   0   0   0   1   1   1   1   1   1
+		     1   1   1   1   1   1   0xE 0xE 0xE 0xE
+		     0xE 0xE 0xE >;
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp0_comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+
+	phy3 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy4 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+
+	phy5 {
+		phy-type = <COMPHY_TYPE_PEX2>;
+		phy-speed = <COMPHY_SPEED_5G>;
+	};
+};
+
+&cp0_utmi0 {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "okay";
+};
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cp0_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cp0_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "sfi"; /* lane-2 */
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "sgmii";
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-7040.dtsi b/roms/u-boot/arch/arm/dts/armada-7040.dtsi
new file mode 100644
index 000000000..039d30c72
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-7040.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
+ * one CP110.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-common.dtsi"
+#include "armada-8k.dtsi"
+#include "armada-ap806.dtsi"
+#include "armada-ap80x-quad.dtsi"
+
+/* CP110-0 Settings */
+#define CP110_NAME		cp0
+#define CP110_NUM		0
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
+/ {
+	model = "Marvell Armada 7040";
+	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp0_pinctl {
+	compatible = "marvell,mvebu-pinctrl", "marvell,7k-pinctrl";
+	bank-name ="cp0-110";
+
+	cp0_i2c0_pins: cp0-i2c-pins-0 {
+		marvell,pins = < 37 38 >;
+		marvell,function = <2>;
+	};
+	cp0_i2c1_pins: cp0-i2c-pins-1 {
+		marvell,pins = < 35 36 >;
+	marvell,function = <2>;
+	};
+	cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+		marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11>;
+		marvell,function = <3>;
+	};
+	cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+		marvell,pins = < 44 45 46 47 48 49 50 51
+				 52 53 54 55 >;
+		marvell,function = <1>;
+	};
+	cp0_pca0_pins: cp0-pca0_pins {
+		marvell,pins = <62>;
+		marvell,function = <0>;
+	};
+	cp0_sdhci_pins: cp0-sdhi-pins-0 {
+		marvell,pins = < 56 57 58 59 60 61 >;
+		marvell,function = <14>;
+	};
+	cp0_spi0_pins: cp0-spi-pins-0 {
+		marvell,pins = < 13 14 15 16 >;
+		marvell,function = <3>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-8040-clearfog-gt-8k.dts b/roms/u-boot/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
new file mode 100644
index 000000000..6a586dbbb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 SolidRun ltd
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+	model = "ClearFog-GT-8K";
+	compatible = "solidrun,clearfog-gt-8k",
+		     "marvell,armada8040";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		i2c1 = &cp0_i2c1;
+		spi0 = &cp1_spi1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	simple-bus {
+		compatible = "simple-bus";
+
+		reg_usb3h0_vbus: usb3-vbus0 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&cp0_xhci_vbus_pins>;
+			regulator-name = "reg-usb3h0-vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <300000>;
+			shutdown-delay-us = <500000>;
+			regulator-force-boot-off;
+			gpio = <&cp0_gpio1 15 GPIO_ACTIVE_LOW>; /* GPIO[47] */
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ap_pinctl {
+	/*
+	 * MPP Bus:
+	 * eMMC [0-10]
+	 * UART0 [11,19]
+	 */
+		  /* 0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 1 1 1 1
+		     1 3 0 0 0 0 0 0 0 3 >;
+};
+
+/* on-board eMMC */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ap_emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&cp0_pinctl {
+	/*
+	 * MPP Bus:
+	 * [0-31] = 0xff: Keep default CP0_shared_pins:
+	 * [11] CLKOUT_MPP_11 (out)
+	 * [23] LINK_RD_IN_CP2CP (in)
+	 * [25] CLKOUT_MPP_25 (out)
+	 * [29] AVS_FB_IN_CP2CP (in)
+	 * [32, 33, 34] pci0/1/2 reset
+	 * [35-38] CP0 I2C1 and I2C0
+	 * [39] GPIO reset button
+	 * [40,41] LED0 and LED1
+	 * [43] 1512 phy reset
+	 * [47] USB VBUS EN (active low)
+	 * [48] FAN PWM
+	 * [49] SFP+ present signal
+	 * [50] TPM interrupt
+	 * [51] WLAN0 disable
+	 * [52] WLAN1 disable
+	 * [53] LTE disable
+	 * [54] NFC reset
+	 * [55] Micro SD card detect
+	 * [56-61] Micro SD
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0    0    0    0    2    2    2    2    0
+		     0    0    0    0    0    0    0    0    0    0
+		     0    0    0    0    0    0    0xe  0xe  0xe  0xe
+		     0xe  0xe  0 >;
+
+	cp0_pcie_reset_pins: cp0-pcie-reset-pins {
+		marvell,pins = < 32 >;
+		marvell,function = <0>;
+	};
+
+	cp0_xhci_vbus_pins: cp0-xhci-vbus-pins {
+		marvell,pins = < 47 >;
+		marvell,function = <0>;
+	};
+
+	cp1_1g_phy_reset: cp1-1g-phy-reset {
+		marvell,pins = < 43 >;
+		marvell,function = <0>;
+	};
+};
+
+/* uSD slot */
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_reset_pins>;
+	marvell,reset-gpio = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_comphy {
+	/*
+	 * CP0 Serdes Configuration:
+	 * Lane 0: PCIe0 (x1)
+	 * Lane 1: Not connected
+	 * Lane 2: SFI0 (10G)
+	 * Lane 3: Not connected
+	 * Lane 4: USB 3.0 host port1 (can be PCIe)
+	 * Lane 5: Not connected
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
+	};
+};
+
+&cp0_ethernet {
+        pinctrl-names = "default";
+        status = "okay";
+};
+
+/* 10G SFI SFP */
+&cp0_eth0 {
+        status = "okay";
+        phy-mode = "sfi";
+};
+
+&cp1_sata0 {
+	status = "okay";
+};
+
+&cp1_usb3_0 {
+	vbus-supply = <&reg_usb3h0_vbus>;
+	status = "okay";
+};
+
+&cp1_utmi0 {
+	status = "okay";
+};
+
+&cp1_pinctl {
+	/*
+	 * MPP Bus:
+	 * [0-5] TDM
+	 * [6]   VHV Enable
+	 * [7]   CP1 SPI0 CSn1 (FXS)
+	 * [8]   CP1 SPI0 CSn0 (TPM)
+	 * [9.11]CP1 SPI0 MOSI/MISO/CLK
+	 * [13]  CP1 SPI1 MISO (TDM and SPI ROM shared)
+	 * [14]  CP1 SPI1 CS0n (64Mb SPI ROM)
+	 * [15]  CP1 SPI1 MOSI (TDM and SPI ROM shared)
+	 * [16]  CP1 SPI1 CLK (TDM and SPI ROM shared)
+	 * [24]  Topaz switch reset
+	 * [26]  Buzzer
+	 * [27]  CP1 SMI MDIO
+	 * [28]  CP1 SMI MDC
+	 * [29]  CP0 10G SFP TX Disable
+	 * [30]  WPS button
+	 * [31]  Front panel button
+	 * [32-62] = 0xff: Keep default CP1_shared_pins:
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x4  0x4  0x4  0x4  0x4  0x4  0x0  0x4  0x4  0x4
+		     0x4  0x4  0x0  0x3  0x3  0x3  0x3  0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0x0  0xff 0x0  0x8  0x8  0x0
+		     0x0  0x0  0x0  0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff>;
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@200000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+&cp1_comphy {
+	/*
+	 * CP1 Serdes Configuration:
+	 * Lane 0: SATA 1 (RX swapped). Can be PCIe0
+	 * Lane 1: Not used
+	 * Lane 2: USB HOST 0
+	 * Lane 3: SGMII1 - Connected to 1512 port
+	 * Lane 4: Not used
+	 * Lane 5: SGMII2 - Connected to Topaz switch
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+		phy-invert = <COMPHY_POLARITY_RXD_INVERT>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
+	};
+};
+
+&cp1_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp1_ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_1g_phy_reset>;
+	status = "okay";
+};
+
+/* 1G SGMII */
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&phy0>;
+	phy-reset-gpios = <&cp0_gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+/* 2.5G to Topaz switch */
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-speed = <2500>;
+	phy-reset-gpios = <&cp1_gpio0 24 GPIO_ACTIVE_LOW>;
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-8040-db.dts b/roms/u-boot/arch/arm/dts/armada-8040-db.dts
new file mode 100644
index 000000000..51c2f23f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-8040-db.dts
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 - 2021 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+	model = "Marvell Armada 8040 DB board";
+	compatible = "marvell,armada8040-db", "marvell,armada8040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		spi0 = &cp1_spi1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+};
+
+&ap_pinctl {
+	/* MPP Bus:
+	 * SDIO  [0-10]
+	 * UART0 [11,19]
+	 */
+		  /* 0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 1 1 1 1
+		     1 3 0 0 0 0 0 0 0 3 >;
+};
+
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ap_emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&cp0_pinctl {
+	/* MPP Bus:
+	 *	[0-31]	= 0xff: Keep default CP0_shared_pins
+	 *	[11]	CLKOUT_MPP_11 (out)
+	 *	[23]	LINK_RD_IN_CP2CP (in)
+	 *	[25]	CLKOUT_MPP_25 (out)
+	 *	[29]	AVS_FB_IN_CP2CP (in)
+	 *	[32,34]	GE_MDIO/MDC
+	 *	[33]	GPIO: GE_INT#/push button/Wake
+	 *	[35]	MSS_GPIO[3]: MSS_PWDN
+	 *	[36]	MSS_GPIO[5]: MSS_VTT_EN
+	 *	[37-38]	I2C0
+	 *	[39]	PTP_CLK
+	 *	[40-41]	SATA[0/1]_PRESENT_ACTIVEn
+	 *	[42-43]	XG_MDC/XG_MDIO (XSMI)
+	 *	[44-55]	RGMII1
+	 *	[56-62]	SD
+	 */
+	/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0x7  0x0  0x7  0xa  0xa  0x2  0x2  0x5
+		     0x9  0x9  0x8  0x8  0x1  0x1  0x1  0x1  0x1  0x1
+		     0x1  0x1  0x1  0x1  0x1  0x1  0xe  0xe  0xe  0xe
+		     0xe  0xe  0xe>;
+};
+
+&cp0_comphy {
+	/* Serdes Configuration:
+	 *	Lane 0: PCIe0 (x1)
+	 *	Lane 1: SATA0
+	 *	Lane 2: SFI (10G)
+	 *	Lane 3: SATA1
+	 *	Lane 4: USB3_HOST1
+	 *	Lane 5: PCIe2 (x1)
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_SATA0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_PEX2>;
+	};
+};
+
+/* CON6 on CP0 expansion */
+&cp0_pcie0 {
+	status = "okay";
+};
+
+&cp0_pcie1 {
+	status = "disabled";
+};
+
+/* CON5 on CP0 expansion */
+&cp0_pcie2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP0 expansion */
+&cp0_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP0 expansion */
+&cp0_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP0 expansion */
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp0_utmi0 {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "okay";
+};
+
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&cp1_pinctl {
+	/* MPP Bus:
+	 *	[0-11]	RGMII0
+	 *	[13-16]	SPI1
+	 *	[27,31]	GE_MDIO/MDC
+	 *	[28]	SATA1_PRESENT_ACTIVEn
+	 *	[29-30]	UART0
+	 *	[32-62]	= 0xff: Keep default CP1_shared_pins
+	 */
+	/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x3  0x3  0x3  0x3  0x3  0x3  0x3  0x3  0x3  0x3
+		     0x3  0x3  0x3  0x3  0x3  0x3  0x3  0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8  0x9  0xa
+		     0xA  0x8  0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff>;
+};
+
+&cp1_comphy {
+	/* Serdes Configuration:
+	 *	Lane 0: PCIe0 (x1)
+	 *	Lane 1: SATA0
+	 *	Lane 2: SFI (10G)
+	 *	Lane 3: SATA1
+	 *	Lane 4: PCIe1 (x1)
+	 *	Lane 5: PCIe2 (x1)
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_SATA0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_PEX1>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_PEX2>;
+	};
+};
+
+/* CON6 on CP1 expansion */
+&cp1_pcie0 {
+	status = "okay";
+};
+
+&cp1_pcie1 {
+	status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cp1_pcie2 {
+	status = "okay";
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+/* CON4 on CP1 expansion */
+&cp1_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cp1_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cp1_usb3_1 {
+	status = "okay";
+};
+
+&cp1_utmi0 {
+	status = "okay";
+};
+
+&cp0_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-8040-mcbin.dts b/roms/u-boot/arch/arm/dts/armada-8040-mcbin.dts
new file mode 100644
index 000000000..218464831
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-8040-mcbin.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 - 2021 Marvell International Ltd.
+ */
+
+#include "armada-8040.dtsi" /* include SoC device tree */
+
+/ {
+	model = "MACCHIATOBin-8040";
+	compatible = "marvell,armada8040-mcbin",
+		     "marvell,armada8040";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		i2c1 = &cp0_i2c1;
+		spi0 = &cp1_spi1;
+		gpio0 = &ap_gpio0;
+		gpio1 = &cp0_gpio0;
+		gpio2 = &cp0_gpio1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	simple-bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb3h0_vbus: usb3-vbus0 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&cp0_xhci_vbus_pins>;
+			regulator-name = "reg-usb3h0-vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <500000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&cp0_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
+		};
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+};
+
+&ap_pinctl {
+	/*
+	 * MPP Bus:
+	 * eMMC [0-10]
+	 * UART0 [11,19]
+	 */
+		  /* 0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 1 1 1 1
+		     1 3 0 0 0 0 0 0 0 3 >;
+};
+
+/* on-board eMMC */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ap_emmc_pins>;
+	bus-width= <8>;
+	status = "okay";
+};
+
+&cp0_pinctl {
+	/*
+	 * MPP Bus:
+	 * [0-31] = 0xff: Keep default CP0_shared_pins:
+	 * [11] CLKOUT_MPP_11 (out)
+	 * [23] LINK_RD_IN_CP2CP (in)
+	 * [25] CLKOUT_MPP_25 (out)
+	 * [29] AVS_FB_IN_CP2CP (in)
+	 * [32,34] SMI
+	 * [33]    MSS power down
+	 * [35-38] CP0 I2C1 and I2C0
+	 * [39] MSS CKE Enable
+	 * [40,41] CP0 UART1 TX/RX
+	 * [42,43] XSMI (controls two 10G phys)
+	 * [47] USB VBUS EN
+	 * [48] FAN PWM
+	 * [49] 10G port 1 interrupt
+	 * [50] 10G port 0 interrupt
+	 * [51] 2.5G SFP TX fault
+	 * [52] PCIe reset out
+	 * [53] 2.5G SFP mode
+	 * [54] 2.5G SFP LOS
+	 * [55] Micro SD card detect
+	 * [56-61] Micro SD
+	 * [62] CP1 SFI SFP FAULT
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0    7    0xa  7    2    2    2    2    0xa
+		     7    7    8    8    0    0    0    0    0    0
+		     0    0    0    0    0    0    0xe  0xe  0xe  0xe
+		     0xe  0xe  0 >;
+
+	cp0_xhci_vbus_pins: cp0-xhci-vbus-pins {
+		marvell,pins = < 47 >;
+		marvell,function = <0>;
+	};
+
+	cp0_pcie_reset_pins: cp0-pcie-reset-pins {
+		marvell,pins = < 52 >;
+		marvell,function = <0>;
+	};
+};
+
+/* uSD slot */
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	bus-width= <4>;
+	status = "okay";
+};
+
+/* PCIe x4 */
+&cp0_pcie0 {
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_reset_pins>;
+	marvell,reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_mdio {
+	ge_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_comphy {
+	/*
+	 * CP0 Serdes Configuration:
+	 * Lane 0: PCIe0 (x4)
+	 * Lane 1: PCIe0 (x4)
+	 * Lane 2: PCIe0 (x4)
+	 * Lane 3: PCIe0 (x4)
+	 * Lane 4: SFI (10G)
+	 * Lane 5: SATA1
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+};
+
+&cp1_sata0 {
+	status = "okay";
+};
+
+&cp1_usb3_0 {
+	vbus-supply = <&reg_usb3h0_vbus>;
+	status = "okay";
+};
+
+&cp1_utmi0 {
+	status = "okay";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy = <&ge_phy>;
+	phy-mode = "sgmii";
+};
+
+&cp1_pinctl {
+	/*
+	 * MPP Bus:
+	 * [0-5] TDM
+	 * [6,7] CP1_UART 0
+	 * [8]   CP1 10G SFP LOS
+	 * [9]   CP1 10G PHY RESET
+	 * [10]  CP1 10G SFP TX Disable
+	 * [11]  CP1 10G SFP Mode
+	 * [12]  SPI1 CS1n
+	 * [13]  SPI1 MISO (TDM and SPI ROM shared)
+	 * [14]  SPI1 CS0n
+	 * [15]  SPI1 MOSI (TDM and SPI ROM shared)
+	 * [16]  SPI1 CLK (TDM and SPI ROM shared)
+	 * [24]  CP1 2.5G SFP TX Disable
+	 * [26]  CP0 10G SFP TX Fault
+	 * [27]  CP0 10G SFP Mode
+	 * [28]  CP0 10G SFP LOS
+	 * [29]  CP0 10G SFP TX Disable
+	 * [30]  USB Over current indication
+	 * [31]  10G Port 0 phy reset
+	 * [32-62] = 0xff: Keep default CP1_shared_pins:
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x4  0x4  0x4  0x4  0x4  0x4  0x8  0x8  0x0  0x0
+		     0x0  0x0  0x3  0x3  0x3  0x3  0x3  0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0x0  0xff 0x0  0x0  0x0 0x0
+		     0x0  0x0  0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff>;
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+&cp1_comphy {
+	/*
+	 * CP1 Serdes Configuration:
+	 * Lane 0: SGMII1
+	 * Lane 1: SATA 0
+	 * Lane 2: USB HOST 0
+	 * Lane 3: SATA1
+	 * Lane 4: SFI (10G)
+	 * Lane 5: SGMII3
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_SATA0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-8040-puzzle-m801.dts b/roms/u-boot/arch/arm/dts/armada-8040-puzzle-m801.dts
new file mode 100644
index 000000000..510fb84d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-8040-puzzle-m801.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ * Copyright (C) 2020 Sartura Ltd.
+ */
+
+#include "armada-8040.dtsi" /* include SoC device tree */
+
+/ {
+	model = "iEi-Puzzle-M801";
+	compatible = "marvell,armada8040-puzzle-m801",
+		     "marvell,armada8040";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &ap_i2c0;
+		i2c1 = &cp0_i2c0;
+		i2c2 = &cp0_i2c1;
+		i2c3 = &i2c_switch;
+		spi0 = &ap_spi0;
+		gpio0 = &ap_gpio0;
+		gpio1 = &cp0_gpio0;
+		gpio2 = &cp0_gpio1;
+		gpio3 = &sfpplus_gpio;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	simple-bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb3h0_vbus: usb3-vbus0 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&cp0_xhci_vbus_pins>;
+			regulator-name = "reg-usb3h0-vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <500000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&cp0_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
+		};
+	};
+};
+
+&ap_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		reg = <0x32>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ap_pinctl {
+	/*
+	 * MPP Bus:
+	 * AP SPI0 [0-3]
+	 * AP I2C [4-5]
+	 * AP GPIO [6]
+	 * AP UART 1 RX/TX [7-8]
+	 * AP GPIO [9-10]
+	 * AP GPIO [12]
+	 * UART0 [11,19]
+	 */
+		  /* 0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 3 3 3 3 3 3 3 3 3 0
+		     0 3 0 0 0 0 0 0 0 3 >;
+};
+
+&cp0_pinctl {
+	/*
+	 * MPP Bus:
+	 * [0-31] = 0xff: Keep default CP0_shared_pins:
+	 * [11] CLKOUT_MPP_11 (out)
+	 * [23] LINK_RD_IN_CP2CP (in)
+	 * [25] CLKOUT_MPP_25 (out)
+	 * [29] AVS_FB_IN_CP2CP (in)
+	 * [32,34] SMI
+	 * [33]    MSS power down
+	 * [35-38] CP0 I2C1 and I2C0
+	 * [39] MSS CKE Enable
+	 * [40,41] CP0 UART1 TX/RX
+	 * [42,43] XSMI (controls two 10G phys)
+	 * [47] USB VBUS EN
+	 * [48] FAN PWM
+	 * [49] 10G port 1 interrupt
+	 * [50] 10G port 0 interrupt
+	 * [51] 2.5G SFP TX fault
+	 * [52] PCIe reset out
+	 * [53] 2.5G SFP mode
+	 * [54] 2.5G SFP LOS
+	 * [55] Micro SD card detect
+	 * [56-61] Micro SD
+	 * [62] CP1 SFI SFP FAULT
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0    7    0xa  7    2    2    2    2    0xa
+		     7    7    8    8    0    0    0    0    0    0
+		     0    0    0    0    0    0    0xe  0xe  0xe  0xe
+		     0xe  0xe  0 >;
+
+	cp0_xhci_vbus_pins: cpm-xhci-vbus-pins {
+		marvell,pins = < 47 >;
+		marvell,function = <0>;
+	};
+
+	cp0_pcie_reset_pins: cpm-pcie-reset-pins {
+		marvell,pins = < 52 >;
+		marvell,function = <0>;
+	};
+};
+
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	bus-width= <4>;
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_reset_pins>;
+	marvell,reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	sfpplus_gpio: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	i2c_switch: i2c-switch@70 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+	};
+};
+
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_ethernet {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cp0_mdio {
+	status = "okay";
+	cp0_ge_phy0: ethernet-phy@1 {
+		reg = <0>;
+	};
+
+	cp0_ge_phy1: ethernet-phy@2 {
+		reg = <1>;
+	};
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "sfi";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&cp0_ge_phy0>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&cp0_ge_phy1>;
+};
+
+&cp0_comphy {
+	/*
+	 * CP0 Serdes Configuration:
+	 * Lane 0: PCIe0 (x1)
+	 * Lane 1: SGMII2
+	 * Lane 2: SATA0
+	 * Lane 3: SGMII1
+	 * Lane 4: SFI (10G)
+	 * Lane 5: SATA1
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_SATA0>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+};
+
+&cp1_mdio {
+	status = "okay";
+	cp1_ge_phy0: ethernet-phy@3 {
+		reg = <1>;
+	};
+
+	cp1_ge_phy1: ethernet-phy@4 {
+		reg = <0>;
+	};
+};
+
+&cp1_pcie0 {
+	num-lanes = <2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cp1_usb3_0 {
+	vbus-supply = <&reg_usb3h0_vbus>;
+	status = "okay";
+};
+
+&cp1_utmi0 {
+	status = "okay";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "sfi";
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy = <&cp1_ge_phy0>;
+	phy-mode = "sgmii";
+};
+
+&cp1_eth2 {
+	status = "okay";
+	phy = <&cp1_ge_phy1>;
+	phy-mode = "sgmii";
+};
+
+&cp1_pinctl {
+	/*
+	 * MPP Bus:
+	 * [0-5] TDM
+	 * [6,7] CP1_UART 0
+	 * [8]   CP1 10G SFP LOS
+	 * [9]   CP1 10G PHY RESET
+	 * [10]  CP1 10G SFP TX Disable
+	 * [11]  CP1 10G SFP Mode
+	 * [12]  SPI1 CS1n
+	 * [13]  SPI1 MISO (TDM and SPI ROM shared)
+	 * [14]  SPI1 CS0n
+	 * [15]  SPI1 MOSI (TDM and SPI ROM shared)
+	 * [16]  SPI1 CLK (TDM and SPI ROM shared)
+	 * [24]  CP1 2.5G SFP TX Disable
+	 * [26]  CP0 10G SFP TX Fault
+	 * [27]  CP0 10G SFP Mode
+	 * [28]  CP0 10G SFP LOS
+	 * [29]  CP0 10G SFP TX Disable
+	 * [30]  USB Over current indication
+	 * [31]  10G Port 0 phy reset
+	 * [32-62] = 0xff: Keep default CP1_shared_pins:
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x4  0x4  0x4  0x4  0x4  0x4  0x8  0x8  0x0  0x0
+		     0x0  0x0  0x3  0x3  0x3  0x3  0x3  0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0x0  0xff 0x0  0x0  0x0 0x0
+		     0x0  0x0  0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff>;
+};
+
+&ap_spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@u-boot {
+				reg = <0x00000000 0x001f0000>;
+				label = "u-boot";
+			};
+			partition@u-boot-env {
+				reg = <0x001f0000 0x00010000>;
+				label = "u-boot-env";
+			};
+			partition@ubi1 {
+				reg = <0x00200000 0x03f00000>;
+				label = "ubi1";
+			};
+			partition@ubi2 {
+				reg = <0x04100000 0x03f00000>;
+				label = "ubi2";
+			};
+		};
+	};
+};
+
+&cp1_comphy {
+	/*
+	 * CP1 Serdes Configuration:
+	 * Lane 0: PCIe0 (x2)
+	 * Lane 1: PCIe0 (x2)
+	 * Lane 2: USB HOST 0
+	 * Lane 3: SGMII1
+	 * Lane 4: SFI (10G)
+	 * Lane 5: SGMII2
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-8040.dtsi b/roms/u-boot/arch/arm/dts/armada-8040.dtsi
new file mode 100644
index 000000000..5123742b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-8040.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
+ * two CP110.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-common.dtsi"
+#include "armada-8k.dtsi"
+#include "armada-ap806.dtsi"
+#include "armada-ap80x-quad.dtsi"
+
+/* CP110-0 Settings */
+#define CP110_NAME		cp0
+#define CP110_NUM		0
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
+/* CP110-1 Settings */
+#define CP110_NAME		cp1
+#define CP110_NUM		1
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
+
+/ {
+	model = "Marvell Armada 8040";
+	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp0_pinctl {
+	compatible = "marvell,mvebu-pinctrl", "marvell,8k-cpm-pinctrl";
+	bank-name ="cp0-110";
+
+	cp0_i2c0_pins: cp0-i2c-pins-0 {
+		marvell,pins = < 37 38 >;
+		marvell,function = <2>;
+	};
+	cp0_i2c1_pins: cp0-i2c-pins-1 {
+		marvell,pins = < 35 36 >;
+	marvell,function = <2>;
+	};
+	cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+		marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11>;
+		marvell,function = <3>;
+	};
+	cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+		marvell,pins = < 44 45 46 47 48 49 50 51
+				 52 53 54 55 >;
+		marvell,function = <1>;
+	};
+	cp0_pca0_pins: cp0-pca0_pins {
+		marvell,pins = <62>;
+		marvell,function = <0>;
+	};
+	cp0_sdhci_pins: cp0-sdhi-pins-0 {
+		marvell,pins = < 56 57 58 59 60 61 >;
+		marvell,function = <14>;
+	};
+	cp0_spi0_pins: cp0-spi-pins-0 {
+		marvell,pins = < 13 14 15 16 >;
+		marvell,function = <3>;
+	};
+};
+
+&cp1_pinctl {
+	compatible = "marvell,mvebu-pinctrl", "marvell,8k-cps-pinctrl";
+	bank-name ="cp1-110";
+
+	cp1_ge1_rgmii_pins: cp1-ge-rgmii-pins-0 {
+		marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11 >;
+		marvell,function = <3>;
+	};
+	cp1_spi1_pins: cp1-spi-pins-1 {
+		marvell,pins = < 13 14 15 16 >;
+		marvell,function = <3>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-8k.dtsi b/roms/u-boot/arch/arm/dts/armada-8k.dtsi
new file mode 100644
index 000000000..c6af9ce63
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-8k.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 - 2021 Marvell International Ltd.
+ */
+/* Common definitions used by Armada 8K DTs */
+
+/* This defines used to calculate the base address of each CP */
+#define CP110_BASE_OFFSET			(0xf2000000)
+#define CP110_SPACE_SIZE			(0x02000000)
+#define CP110_BASE				(CP110_BASE_OFFSET + \
+	((CP110_NUM % 2) * CP110_SPACE_SIZE))
+
+#define CP110_PCIE_MEM_SIZE(iface)	(0xf00000)
+#define CP110_PCIEx_CPU_MEM_BASE(iface)		\
+	(0xf6000000 + (CP110_NUM % 2) * 0x4000000 + (iface) *  0x1000000)
+#define CP110_PCIEx_BUS_MEM_BASE(iface)		\
+		(CP110_PCIEx_CPU_MEM_BASE(iface))
+#define CP110_PCIE_BUS_MEM_CFG			(0x82000000)
diff --git a/roms/u-boot/arch/arm/dts/armada-ap806.dtsi b/roms/u-boot/arch/arm/dts/armada-ap806.dtsi
new file mode 100644
index 000000000..f432089ab
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-ap806.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+/* AP806 Settings */
+#define AP_NAME				ap806
+
+#include "armada-ap80x.dtsi"
+
+/ {
+	model = "Marvell Armada AP806";
+
+	AP_NAME {
+		config-space {
+			sar-reg {
+				compatible = "marvell,sample-at-reset-common",
+					     "marvell,sample-at-reset-ap806";
+				reg = <0x6F8200 0x8>;
+				sar-driver = "ap806_sar";
+				sar-name = "ap806_sar";
+				status = "okay";
+			};
+
+			thermal: thermal@6f8084 {
+				compatible = "marvell,mvebu-thermal",
+					     "marvell,thermal-ext-sensor";
+				reg = <0x6f8084 0x12>;
+				gain = <425>;
+				offset = <153400>;
+				divisor = <1000>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-ap807.dtsi b/roms/u-boot/arch/arm/dts/armada-ap807.dtsi
new file mode 100644
index 000000000..a5309f343
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-ap807.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP807.
+ */
+
+/* AP807 Settings */
+#define AP_NAME				ap807
+
+#include "armada-ap80x.dtsi"
+
+/ {
+	model = "Marvell Armada AP807";
+
+	AP_NAME {
+		config-space {
+			sar-reg {
+				compatible = "marvell,sample-at-reset-common",
+					     "marvell,sample-at-reset-ap807";
+				reg = <0x6F8200 0x8>;
+				sar-driver = "ap807_sar";
+				sar-name = "ap807_sar";
+				status = "okay";
+			};
+
+			thermal: thermal@6f8084 {
+				compatible = "marvell,mvebu-thermal",
+					     "marvell,thermal-ext-sensor";
+				reg = <0x6f8084 0x12>;
+				gain = <394>;
+				offset = <128900>;
+				divisor = <1000>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-ap80x-quad.dtsi b/roms/u-boot/arch/arm/dts/armada-ap80x-quad.dtsi
new file mode 100644
index 000000000..1220e986e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-ap80x-quad.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806/AP807.
+ */
+
+/ {
+	model = "Marvell Armada AP80X Quad";
+	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			clocks;
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			clocks;
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			clocks;
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			clocks;
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-ap80x.dtsi b/roms/u-boot/arch/arm/dts/armada-ap80x.dtsi
new file mode 100644
index 000000000..8787a872d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-ap80x.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806/AP807.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	compatible = "marvell,armada-ap806";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	AP_NAME {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+			gic: interrupt-controller@210000 {
+				compatible = "arm,gic-400";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				reg = <0x210000 0x10000>,
+				      <0x220000 0x20000>,
+				      <0x240000 0x20000>,
+				      <0x260000 0x20000>;
+
+				gic_v2m0: v2m@280000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x280000 0x1000>;
+					arm,msi-base-spi = <160>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m1: v2m@290000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x290000 0x1000>;
+					arm,msi-base-spi = <192>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m2: v2m@2a0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2a0000 0x1000>;
+					arm,msi-base-spi = <224>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m3: v2m@2b0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2b0000 0x1000>;
+					arm,msi-base-spi = <256>;
+					arm,msi-num-spis = <32>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			};
+
+			odmi: odmi@300000 {
+				compatible = "marvell,odmi-controller";
+				interrupt-controller;
+				msi-controller;
+				marvell,odmi-frames = <4>;
+				reg = <0x300000 0x4000>,
+				      <0x304000 0x4000>,
+				      <0x308000 0x4000>,
+				      <0x30C000 0x4000>;
+				marvell,spi-base = <128>, <136>, <144>, <152>;
+			};
+
+			ap_pinctl: ap-pinctl@6F4000 {
+				compatible = "marvell,ap806-pinctrl";
+				bank-name ="apn-806";
+				reg = <0x6F4000 0x10>;
+				pin-count = <20>;
+				max-func = <3>;
+
+				ap_i2c0_pins: i2c-pins-0 {
+					marvell,pins = < 4 5 >;
+					marvell,function = <3>;
+				};
+				ap_emmc_pins: emmc-pins-0 {
+					marvell,pins = < 0 1 2 3 4 5 6 7
+							 8 9 10 12 >;
+					marvell,function = <1>;
+				};
+			};
+
+			ap_gpio0: gpio@6F5040 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x6F5040 0x40>;
+				ngpios = <20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			ap_spi0: spi@510600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x510600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ap_syscon 3>;
+				status = "disabled";
+			};
+
+			ap_i2c0: i2c@511000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x511000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&ap_syscon 3>;
+				status = "disabled";
+			};
+
+			uart0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_syscon 3>;
+				status = "disabled";
+				clock-frequency = <200000000>;
+			};
+
+			uart1: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_syscon 3>;
+				status = "disabled";
+
+			};
+
+			watchdog: watchdog@610000 {
+				compatible = "arm,sbsa-gwdt";
+				reg = <0x610000 0x1000>, <0x600000 0x1000>;
+			};
+
+			ap_sdhci0: sdhci@6e0000 {
+				compatible = "marvell,armada-8k-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				dma-coherent;
+				status = "disabled";
+			};
+
+			ap_syscon: system-controller@6f4000 {
+				compatible = "marvell,ap806-system-controller",
+					     "syscon";
+				#clock-cells = <1>;
+				clock-output-names = "ap-cpu-cluster-0",
+						     "ap-cpu-cluster-1",
+						     "ap-fixed", "ap-mss";
+				reg = <0x6f4000 0x1000>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-common.dtsi b/roms/u-boot/arch/arm/dts/armada-common.dtsi
new file mode 100644
index 000000000..b7dfbda39
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-common.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y)		x ## _ ## y
+#define EVALUATOR(x, y)		PASTER(x, y)
+
+/* This define used to create die label:
+ * For example:
+ * CP110 master:
+ *     CP110_LABEL(spi0) -> cp0_spi0
+ * CP110 slave:
+ *     CP110_LABEL(usb0) -> cp1_usb0
+ */
+#define CP110_LABEL(name)	EVALUATOR(CP110_NAME, name)
+
+#define APPEND_NX(A, B)		A ##-## B
+#define APPEND(A, B)		APPEND_NX(A, B)
+
+#define STRINGIZE_NX(x)		#x
+#define STRINGIZE(x)		STRINGIZE_NX(x)
+
+/* Same idea here, but this define convert the name to string:
+ * For example:
+ * master: CP110_STRING_LABEL(ppv2) -> "cp0-ppv2"
+ * slave: CP110_STRING_LABEL(ppv2) -> "cp1-ppv2"
+ */
+#define CP110_STRING_LABEL(name)	STRINGIZE(APPEND(CP110_NAME, name))
diff --git a/roms/u-boot/arch/arm/dts/armada-cp110.dtsi b/roms/u-boot/arch/arm/dts/armada-cp110.dtsi
new file mode 100644
index 000000000..abf1e4ea0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-cp110.dtsi
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
+ */
+
+/*
+ * Generic Device Tree describing Marvell Armada CP-110 device
+ */
+
+#include <dt-bindings/comphy/comphy_data.h>
+
+#define U64_TO_U32_H(addr)		(((addr) >> 32) & 0xffffffff)
+#define U64_TO_U32_L(addr)		((addr) & 0xffffffff)
+
+#define CP110_PCIEx_REG0_BASE(iface)	\
+	(CP110_BASE + 0x600000 + (iface) * 0x20000)
+#define CP110_PCIEx_REG1_BASE(iface)	\
+	(CP110_PCIEx_CPU_MEM_BASE(iface) + CP110_PCIE_MEM_SIZE(iface))
+#define CP110_PCIE_EP_REG_BASE(iface)	(CP110_BASE + 0x600000 + \
+					 (iface) * 0x4000)
+
+/ {
+	CP110_NAME {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 U64_TO_U32_H(CP110_BASE) U64_TO_U32_L(CP110_BASE) 0x2000000>;
+
+			CP110_LABEL(mdio): mdio@12a200 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x12a200 0x10>;
+				device-name = CP110_STRING_LABEL(mdio);
+				status = "disabled";
+			};
+
+			CP110_LABEL(xmdio): mdio@12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x200>;
+				device-name = CP110_STRING_LABEL(xmdio);
+				status = "disabled";
+			};
+
+			CP110_LABEL(sar-reg) {
+				compatible = "marvell,sample-at-reset-common",
+					     "marvell,sample-at-reset-cp110";
+				reg = <0x400200 0x8>;
+				sar-driver = "cp110_sar";
+				sar-name = CP110_STRING_LABEL(sar);
+				status = "okay";
+			};
+
+			CP110_LABEL(syscon0): system-controller@440000 {
+				compatible = "marvell,cp110-system-controller0",
+					     "syscon";
+				reg = <0x440000 0x1000>;
+				#clock-cells = <2>;
+				core-clock-output-names =
+					"cpm-apll", "cpm-ppv2-core", "cpm-eip",
+					"cpm-core", "cpm-nand-core";
+				gate-clock-output-names =
+					"cpm-audio", "cpm-communit", "cpm-nand",
+					"cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
+					"cpm-mg-core", "cpm-xor1", "cpm-xor0",
+					"cpm-gop-dp", "none", "cpm-pcie_x10",
+					"cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
+					"cpm-sata", "cpm-sata-usb", "cpm-main",
+					"cpm-sd-mmc", "none", "none",
+					"cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
+					"cpm-usb3dev", "cpm-eip150", "cpm-eip197";
+			};
+
+			CP110_LABEL(pinctl): pinctl@440000 {
+				compatible = "marvell,mvebu-pinctrl";
+				reg = <0x440000 0x20>;
+				pin-count = <63>;
+				max-func = <0xf>;
+			};
+
+			CP110_LABEL(gpio0): gpio@440100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x440100 0x40>;
+				ngpios = <32>;
+				gpiobase = <20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			CP110_LABEL(gpio1): gpio@440140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x440140 0x40>;
+				ngpios = <31>;
+				gpiobase = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			CP110_LABEL(sata0): sata@540000 {
+				compatible = "marvell,armada-8k-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&CP110_LABEL(syscon0) 1 15>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(usb3_0): usb3@500000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x500000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&CP110_LABEL(syscon0) 1 22>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(usb3_1): usb3@510000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x510000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&CP110_LABEL(syscon0) 1 23>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(spi0): spi@700600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700600 0x50>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				cell-index = <1>;
+				spi-max-frequency = <50000000>;
+				clocks = <&CP110_LABEL(syscon0) 0 3>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(spi1): spi@700680 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <2>;
+				spi-max-frequency = <50000000>;
+				clocks = <&CP110_LABEL(syscon0) 1 21>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(i2c0): i2c@701000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&CP110_LABEL(syscon0) 1 21>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(i2c1): i2c@701100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&CP110_LABEL(syscon0) 1 21>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(mss_i2c0): i2c@211000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x211000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(comphy): comphy@441000 {
+				compatible = "marvell,mvebu-comphy", "marvell,comphy-cp110";
+				reg = <0x441000 0x8>,
+				      <0x120000 0x8>;
+				mux-bitcount = <4>;
+				max-lanes = <6>;
+			};
+
+			CP110_LABEL(utmi): utmi@580000 {
+				compatible = "marvell,mvebu-utmi";
+				reg = <0x580000 0xc>; /* utmi-common-pll */
+				#address-cells = <1>;
+				#size-cells = <1>;
+				CP110_LABEL(utmi0): utmi@58000c {
+					compatible = "marvell,mvebu-utmi-2.6.0";
+					reg = <0x58000c 0x100>,/* utmi-unit */
+					      <0x440420 0x4>,	/* usb-cfg */
+					      <0x440440 0x4>;	/* utmi-cfg */
+					utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
+					status = "disabled";
+				};
+
+				CP110_LABEL(utmi1): utmi@58100c {
+					compatible = "marvell,mvebu-utmi-2.6.0";
+					reg = <0x58100c 0x100>,/* utmi-unit */
+					      <0x440420 0x4>,	/* usb-cfg */
+					      <0x440444 0x4>;	/* utmi-cfg */
+					utmi-port = <UTMI_PHY_TO_USB3_HOST1>;
+					status = "disabled";
+				};
+			};
+
+			CP110_LABEL(sdhci0): sdhci@780000 {
+				compatible = "marvell,armada-8k-sdhci";
+				reg = <0x780000 0x300>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				dma-coherent;
+				status = "disabled";
+			};
+
+			CP110_LABEL(nand): nand@720000 {
+				compatible = "marvell,armada-8k-nand-controller",
+					"marvell,armada370-nand-controller";
+				reg = <0x720000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&CP110_LABEL(syscon0) 1 2>;
+				nand-enable-arbiter;
+				num-cs = <1>;
+				nand-ecc-strength = <8>;
+				nand-ecc-step-size = <512>;
+				marvell,system-controller = <&CP110_LABEL(syscon0)>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(ethernet): ethernet@0 {
+				compatible = "marvell,armada-7k-pp22";
+				reg = <0x0 0x100000>, <0x129000 0xb000>;
+				clocks = <&CP110_LABEL(syscon0) 1 3>, <&CP110_LABEL(syscon0) 1 9>, <&CP110_LABEL(syscon0) 1 5>;
+				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				status = "disabled";
+				dma-coherent;
+
+				CP110_LABEL(eth0): eth0 {
+					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <0>;
+					gop-port-id = <0>;
+					status = "disabled";
+				};
+
+				CP110_LABEL(eth1): eth1 {
+					interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <1>;
+					gop-port-id = <2>;
+					status = "disabled";
+				};
+
+				CP110_LABEL(eth2): eth2 {
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <2>;
+					gop-port-id = <3>;
+					status = "disabled";
+				};
+			};
+		};
+
+		CP110_LABEL(pcie0): pcie0@600000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg =
+			   <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(0)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(0)) 0 0x10000>,
+			   /* Last 512KB of mem space */
+			   <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(0)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(0)) 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* non-prefetchable memory */
+				<CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(0))
+				U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(0)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(0))
+				U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(0))
+				U64_TO_U32_H(CP110_PCIE_MEM_SIZE(0)) U64_TO_U32_L(CP110_PCIE_MEM_SIZE(0))>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			num-lanes = <1>;
+			clocks = <&CP110_LABEL(syscon0) 1 13>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(pcie1): pcie1@620000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg =
+			   <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(1)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(1)) 0 0x10000>,
+			   /* Last 512KB of mem space */
+			   <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(1)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(1)) 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* non-prefetchable memory */
+				<CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(1))
+				U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(1)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(1))
+				U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(1)) U64_TO_U32_H(CP110_PCIE_MEM_SIZE(1))
+				U64_TO_U32_L(CP110_PCIE_MEM_SIZE(1))>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&CP110_LABEL(syscon0) 1 11>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(pcie2): pcie2@640000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg =
+			   <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(2)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(2)) 0 0x10000>,
+			   /* Last 64KB of mem space */
+			   <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(2)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(2)) 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* non-prefetchable memory */
+				<CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(2))
+				U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(2)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(2))
+				U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(2)) U64_TO_U32_H(CP110_PCIE_MEM_SIZE(2))
+				U64_TO_U32_L(CP110_PCIE_MEM_SIZE(2))>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&CP110_LABEL(syscon0) 1 12>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-98dx3236.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-98dx3236.dtsi
new file mode 100644
index 000000000..5df1d1848
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-98dx3236.dtsi
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3236 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Marvell 98DX3236 SoC";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,98dx3236-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		/*
+		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			/* does not exist */
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@18180 { /* rework some properties */
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <1>; /* only gpio #32 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,mv98dx3236-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,mv98dx3236-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			corediv-clock@18740 {
+				status = "disabled";
+			};
+
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			xor1: xor@f0800 {
+				compatible = "marvell,orion-xor";
+				reg = <0xf0800 0x100
+				       0xf0a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			nand_controller: nand@d0000 {
+				clocks = <&dfx_coredivclk 0>;
+			};
+
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+
+		dfx: dfx-server@ac000000 {
+			compatible = "marvell,dfx-server", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+                        thermal: thermal@f8078 {
+                                compatible = "marvell,armada380-thermal";
+                                reg = <0xf8078 0x4>, <0xf8074 0x4>;
+                                status = "okay";
+                        };
+
+			coreclk: mvebu-sar@f8204 {
+				compatible = "marvell,mv98dx3236-core-clock";
+				reg = <0xf8204 0x4>;
+				#clock-cells = <1>;
+			};
+
+			dfx_coredivclk: corediv-clock@f8268 {
+				compatible = "marvell,mv98dx3236-corediv-clock";
+				reg = <0xf8268 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		switch: switch@a8000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+			pp0: packet-processor@0 {
+				compatible = "marvell,prestera-98dx3236", "marvell,prestera";
+				reg = <0 0x4000000>;
+				interrupts = <33>, <34>, <35>;
+				dfx = <&dfx>;
+			};
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
+&pinctrl {
+	compatible = "marvell,98dx3236-pinctrl";
+
+	nand_pins: nand-pins {
+		marvell,pins = "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25",
+			       "mpp26", "mpp27", "mpp28",
+			       "mpp29", "mpp30";
+		marvell,function = "dev";
+	};
+
+	nand_rb: nand-rb {
+		marvell,pins = "mpp19";
+		marvell,function = "nand";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp0", "mpp1",
+			       "mpp2", "mpp3";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&sdio {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-98dx3336.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-98dx3336.dtsi
new file mode 100644
index 000000000..1d9d8a8ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-98dx3336.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3336 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX3336 SoC";
+	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx3336", "marvell,prestera";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-98dx4251.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-98dx4251.dtsi
new file mode 100644
index 000000000..48ffdc72b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-98dx4251.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx4521 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx4521 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX4251 SoC";
+	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&sdio {
+	status = "okay";
+};
+
+&pinctrl {
+	compatible = "marvell,98dx4251-pinctrl";
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10";
+		marvell,function = "sd0";
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx4251", "marvell,prestera";
+	interrupts = <33>, <34>, <35>, <36>;
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s-bit.dts b/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s-bit.dts
new file mode 100644
index 000000000..059bf48ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS305-1G-4S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs305-1g-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS305-1G-4S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi
new file mode 100644
index 000000000..8576a0273
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s.dts b/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s.dts
new file mode 100644
index 000000000..010b83b54
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS305-1G-4S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs305-1g-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS305-1G-4S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s.dtsi
new file mode 100644
index 000000000..1a74ecd5b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs305-1g-4s.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS305-1G-4S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+#include "armada-xp-crs305-1g-4s-u-boot.dtsi"
+
+/ {
+	model = "CRS305-1G-4S+";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts b/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
new file mode 100644
index 000000000..b340eedf7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi
new file mode 100644
index 000000000..8576a0273
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s.dts b/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s.dts
new file mode 100644
index 000000000..83aef43f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi
new file mode 100644
index 000000000..e50f3ead1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS326-24G-2S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+#include "armada-xp-crs326-24g-2s-u-boot.dtsi"
+
+/ {
+	model = "CRS326-24G-2S+";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s-bit.dts
new file mode 100644
index 000000000..d684c895f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs328-4c-20s-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS328-4C-20S-4S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s-u-boot.dtsi
new file mode 100644
index 000000000..8576a0273
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts b/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts
new file mode 100644
index 000000000..665757f6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS328-4C-20S-4S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs328-4c-20s-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS328-4C-20S-4S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dtsi
new file mode 100644
index 000000000..daff1af2a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS328-4C-20S-4S+ board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+#include "armada-xp-crs328-4c-20s-4s-u-boot.dtsi"
+
+/ {
+	model = "CRS328-4C-20S-4S+";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
new file mode 100644
index 000000000..90cad8550
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&nand_controller {
+	compatible="marvell,mvebu-pxa3xx-nand";
+	status = "okay";
+	label = "pxa3xx_nand-0";
+	nand-rb = <0>;
+	marvell,nand-keep-config;
+	nand-on-flash-bbt;
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-db-xc3-24g4xg.dts b/roms/u-boot/arch/arm/dts/armada-xp-db-xc3-24g4xg.dts
new file mode 100644
index 000000000..d4b52881e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-db-xc3-24g4xg.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-XC3-24G4XG board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3336.dtsi"
+#include "armada-xp-db-xc3-24g4xg-u-boot.dtsi"
+
+/ {
+	model = "DB-XC3-24G4XG";
+	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-gp-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-gp-u-boot.dtsi
new file mode 100644
index 000000000..242285661
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-gp-u-boot.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+	soc {
+		internal-regs {
+			serial@12000 {
+				u-boot,dm-pre-reloc;
+			};
+		};
+	};
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-gp.dts b/roms/u-boot/arch/arm/dts/armada-xp-gp.dts
new file mode 100644
index 000000000..d46475fe2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-gp.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP development board
+ * (DB-MV784MP-GP)
+ *
+ * Copyright (C) 2013-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
+	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/*
+                 * 8 GB of plug-in RAM modules by default.The amount
+                 * of memory available can be changed by the
+                 * bootloader according the size of the module
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
+		 */
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
+		      <0x00000001 0x00000000 0x00000001 0x00000000>;
+	};
+
+	cpus {
+		pm_pic {
+			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
+				     <&gpio0 17 GPIO_ACTIVE_LOW>,
+				     <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+			pinctrl {
+				pinctrl-0 = <&pic_pins>;
+				pinctrl-names = "default";
+				pic_pins: pic-pins-0 {
+					marvell,pins = "mpp16", "mpp17",
+						       "mpp18";
+					marvell,function = "gpio";
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			/* Front-side USB slot */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Back-side USB slot */
+			usb@51000 {
+				status = "okay";
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+
+			nand@d0000 {
+				status = "okay";
+				label = "pxa3xx_nand-0";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				nand-on-flash-bbt;
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * The 3 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <16>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <17>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <18>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <19>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-maxbcm.dts b/roms/u-boot/arch/arm/dts/armada-xp-maxbcm.dts
new file mode 100644
index 000000000..d2b07f74c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-maxbcm.dts
@@ -0,0 +1,252 @@
+/*
+ * Device Tree file for Marvell Armada XP maxbcm board
+ *
+ * Copyright (C) 2013-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP MAXBCM";
+	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		/*
+                 * 8 GB of plug-in RAM modules by default.The amount
+                 * of memory available can be changed by the
+                 * bootloader according the size of the module
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
+		 */
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
+		      <0x00000001 0x00000000 0x00000001 0x00000000>;
+	};
+
+	cpus {
+		pm_pic {
+			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
+				     <&gpio0 17 GPIO_ACTIVE_LOW>,
+				     <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The 3 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+			pinctrl {
+				pinctrl-0 = <&pic_pins>;
+				pinctrl-names = "default";
+				pic_pins: pic-pins-0 {
+					marvell,pins = "mpp16", "mpp17",
+						       "mpp18";
+					marvell,function = "gpio";
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+			};
+
+			/* Front-side USB slot */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Back-side USB slot */
+			usb@51000 {
+				status = "okay";
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-mv78230.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-mv78230.dtsi
new file mode 100644
index 000000000..8558bf6bb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-mv78230.dtsi
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x1 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78230-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-mv78260.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-mv78260.dtsi
new file mode 100644
index 000000000..2d85fe8ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-mv78260.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78260-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-mv78460.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-mv78460.dtsi
new file mode 100644
index 000000000..230a3fd36
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-mv78460.dtsi
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie10: pcie@a,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78460-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-synology-ds414-u-boot.dtsi b/roms/u-boot/arch/arm/dts/armada-xp-synology-ds414-u-boot.dtsi
new file mode 100644
index 000000000..22fae16c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-synology-ds414-u-boot.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-synology-ds414.dts b/roms/u-boot/arch/arm/dts/armada-xp-synology-ds414.dts
new file mode 100644
index 000000000..861967cd7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-synology-ds414.dts
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Synology DS414";
+	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Seiko S-35390A below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB. This
+			 * provides the main console for the device.
+			 *
+			 * Warning: the device may not boot with a 3.3V
+			 * USB-serial converter connected when the power
+			 * button is pressed. The converter needs to be
+			 * connected a few seconds after pressing the
+			 * power button. This is possibly due to UART0_TXD
+			 * pin being sampled at reset (bit 0 of SAR).
+			 */
+			serial@12000 {
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			/* Connected to a Microchip PIC16F883 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
+			     &sata3_pwr_pin &sata4_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata3_regulator: sata3-regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA3 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <6000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata4_regulator: sata4-regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA4 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <8000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * Connected to Marvell 88SX7042 SATA-II controller
+	 * handling the four disks.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/*
+	 * Connected to EtronTech EJ168A XHCI controller
+	 * providing the two rear USB 3.0 ports.
+	 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata3_pwr_pin: sata3-pwr-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	sata4_pwr_pin: sata4-pwr-pin {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	fan1_alarm_pin: fan1-alarm-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	fan2_alarm_pin: fan2-alarm-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@3a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp-theadorable.dts b/roms/u-boot/arch/arm/dts/armada-xp-theadorable.dts
new file mode 100644
index 000000000..6a1df870a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp-theadorable.dts
@@ -0,0 +1,206 @@
+/*
+ * Device Tree file for Marvell Armada XP theadorable board
+ *
+ * Copyright (C) 2013-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78260.dtsi"
+
+/ {
+	model = "Marvell Armada XP theadorable";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		spi0 = &spi0;
+		spi1 = &spi1;
+		ethernet0 = &eth0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x80000000>;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			serial@12100 {
+				status = "okay";
+			};
+
+			serial@12200 {
+				status = "okay";
+			};
+
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			/* The LCD controller is only used on this board */
+			lcd0: lcd-controller@e0000 {
+				compatible = "marvell,armada-xp-lcd";
+				reg = <0xe0000 0x10000>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: panel0 {
+						hactive = <240>;
+						vactive = <320>;
+						hfront-porch = <1>;
+						hback-porch = <45>;
+						vfront-porch = <1>;
+						vback-porch = <3>;
+
+						/* Some dummy parameters */
+						clock-frequency = <0>;
+						hsync-len = <0>;
+						vsync-len = <0>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <27777777>;
+	};
+
+	fpga@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-generic-device";
+		reg = <1>; /* Chip select 1 */
+		spi-max-frequency = <27777777>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	fpga@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-generic-device";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <27777777>;
+	};
+};
+
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/armada-xp.dtsi b/roms/u-boot/arch/arm/dts/armada-xp.dtsi
new file mode 100644
index 000000000..d856d9602
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armada-xp.dtsi
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * Contains definitions specific to the Armada XP SoC that are not
+ * common to all Armada SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+		u-boot,dm-pre-reloc;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		internal-regs {
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart2_pins>;
+				pinctrl-names = "default";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <43>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart3_pins>;
+				pinctrl-names = "default";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <44>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-xp-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-xp-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
+
+			thermal: thermal@182b0 {
+				compatible = "marvell,armadaxp-thermal";
+				reg = <0x182b0 0x4
+					0x184d0 0x4>;
+				status = "okay";
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,armada-xp-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			eth2: ethernet@30000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x30000 0x4000>;
+				interrupts = <12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb2: usb@52000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x52000 0x500>;
+				interrupts = <47>;
+				clocks = <&gateclk 20>;
+				status = "disabled";
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-xp-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>, <49>;
+				clocks = <&gateclk 23>, <&gateclk 23>;
+				clock-names = "cesa0", "cesa1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			bm: bm@c0000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc0000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
+&pinctrl {
+	ge0_gmii_pins: ge0-gmii-pins {
+		marvell,pins =
+		     "mpp0",  "mpp1",  "mpp2",  "mpp3",
+		     "mpp4",  "mpp5",  "mpp6",  "mpp7",
+		     "mpp8",  "mpp9",  "mpp10", "mpp11",
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge0";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins =
+		     "mpp0", "mpp1", "mpp2", "mpp3",
+		     "mpp4", "mpp5", "mpp6", "mpp7",
+		     "mpp8", "mpp9", "mpp10", "mpp11";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins =
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge1";
+	};
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp30", "mpp31", "mpp32",
+			       "mpp33", "mpp34", "mpp35";
+		marvell,function = "sd0";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp36", "mpp37",
+			       "mpp38", "mpp39";
+		marvell,function = "spi0";
+	};
+
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14",
+			       "mpp16", "mpp17";
+		marvell,function = "spi1";
+	};
+
+	uart2_pins: uart2-pins {
+		marvell,pins = "mpp42", "mpp43";
+		marvell,function = "uart2";
+	};
+
+	uart3_pins: uart3-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "uart3";
+	};
+};
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/roms/u-boot/arch/arm/dts/armv7-m.dtsi b/roms/u-boot/arch/arm/dts/armv7-m.dtsi
new file mode 100644
index 000000000..26f5443d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/armv7-m.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	nvic: interrupt-controller@e000e100  {
+		compatible = "arm,armv7m-nvic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xe000e100 0xc00>;
+	};
+
+	systick: timer@e000e010 {
+		compatible = "arm,armv7m-systick";
+		reg = <0xe000e010 0x10>;
+		status = "disabled";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&nvic>;
+		ranges;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ast2500-evb.dts b/roms/u-boot/arch/arm/dts/ast2500-evb.dts
new file mode 100644
index 000000000..4796ed445
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ast2500-evb.dts
@@ -0,0 +1,75 @@
+/dts-v1/;
+
+#include "ast2500-u-boot.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+	};
+};
+
+&uart5 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdrammc {
+	clock-frequency = <400000000>;
+};
+
+&wdt1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&wdt2 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&wdt3 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mac1link_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mac2link_default &pinctrl_mdio2_default>;
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+};
diff --git a/roms/u-boot/arch/arm/dts/ast2500-u-boot.dtsi b/roms/u-boot/arch/arm/dts/ast2500-u-boot.dtsi
new file mode 100644
index 000000000..ea60e4c8d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ast2500-u-boot.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/reset/ast2500-reset.h>
+
+#include "ast2500.dtsi"
+
+/ {
+	scu: clock-controller@1e6e2000 {
+		compatible = "aspeed,ast2500-scu";
+		reg = <0x1e6e2000 0x1000>;
+		u-boot,dm-pre-reloc;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	rst: reset-controller {
+		u-boot,dm-pre-reloc;
+		compatible = "aspeed,ast2500-reset";
+		#reset-cells = <1>;
+	};
+
+	sdrammc: sdrammc@1e6e0000 {
+		u-boot,dm-pre-reloc;
+		compatible = "aspeed,ast2500-sdrammc";
+		reg = <0x1e6e0000 0x174
+			0x1e6e0200 0x1d4 >;
+		#reset-cells = <1>;
+		clocks = <&scu ASPEED_CLK_MPLL>;
+		resets = <&rst ASPEED_RESET_SDRAM>;
+	};
+
+	ahb {
+		u-boot,dm-pre-reloc;
+
+		apb {
+			u-boot,dm-pre-reloc;
+
+			sdhci0: sdhci@1e740100 {
+				compatible = "aspeed,ast2500-sdhci";
+				reg = <0x1e740100>;
+				#reset-cells = <1>;
+				clocks = <&scu ASPEED_CLK_SDIO>;
+				resets = <&rst ASPEED_RESET_SDIO>;
+			};
+
+			sdhci1: sdhci@1e740200 {
+				compatible = "aspeed,ast2500-sdhci";
+				reg = <0x1e740200>;
+				#reset-cells = <1>;
+				clocks = <&scu ASPEED_CLK_SDIO>;
+				resets = <&rst ASPEED_RESET_SDIO>;
+			};
+		};
+
+	};
+};
+
+&uart1 {
+	clocks = <&scu ASPEED_CLK_GATE_UART1CLK>;
+};
+
+&uart2 {
+	clocks = <&scu ASPEED_CLK_GATE_UART2CLK>;
+};
+
+&uart3 {
+	clocks = <&scu ASPEED_CLK_GATE_UART3CLK>;
+};
+
+&uart4 {
+	clocks = <&scu ASPEED_CLK_GATE_UART4CLK>;
+};
+
+&uart5 {
+	clocks = <&scu ASPEED_CLK_GATE_UART5CLK>;
+};
+
+&timer {
+	u-boot,dm-pre-reloc;
+};
+
+&mac0 {
+	clocks = <&scu ASPEED_CLK_GATE_MAC1CLK>, <&scu ASPEED_CLK_D2PLL>;
+};
+
+&mac1 {
+	clocks = <&scu ASPEED_CLK_GATE_MAC1CLK>, <&scu ASPEED_CLK_D2PLL>;
+};
diff --git a/roms/u-boot/arch/arm/dts/ast2500.dtsi b/roms/u-boot/arch/arm/dts/ast2500.dtsi
new file mode 100644
index 000000000..98359bf92
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ast2500.dtsi
@@ -0,0 +1,1410 @@
+/*
+ * This device tree is copied from
+ * https://raw.githubusercontent.com/torvalds/linux/34ea5c9d/arch/arm/boot/dts/aspeed-g5.dtsi
+ */
+#include "skeleton.dtsi"
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2500";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1176jzf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: flash-controller@1e620000 {
+			reg = < 0x1e620000 0xc4
+				0x20000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-fmc";
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		spi1: flash-controller@1e630000 {
+			reg = < 0x1e630000 0xc4
+				0x30000000 0x08000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		spi2: flash-controller@1e631000 {
+			reg = < 0x1e631000 0xc4
+				0x38000000 0x08000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xfefff7ff 0x0807ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <13>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2500-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <2>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				pinctrl: pinctrl {
+					compatible = "aspeed,g5-pinctrl";
+					aspeed,external-nodes = <&gfx &lhc>;
+
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2500-adc";
+				reg = <0x1e6e9000 0xb0>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x9000>;	// 36K
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2500-gpio";
+				reg = <0x1e780000 0x1000>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 220>;
+				interrupt-controller;
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785000 0x1c>;
+				interrupts = <27>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785020 0x1c>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			wdt3: watchdog@1e785040 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785040 0x1c>;
+				status = "disabled";
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2500-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2500-lpc", "simple-mfd";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_bmc: lpc-bmc@0 {
+					compatible = "aspeed,ast2500-lpc-bmc";
+					reg = <0x0 0x80>;
+				};
+
+				lpc_host: lpc-host@80 {
+					compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+					reg = <0x80 0x1e0>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x80 0x1e0>;
+
+					lpc_ctrl: lpc-ctrl@0 {
+						compatible = "aspeed,ast2500-lpc-ctrl";
+						reg = <0x0 0x80>;
+						status = "disabled";
+					};
+
+					lpc_snoop: lpc-snoop@0 {
+						compatible = "aspeed,ast2500-lpc-snoop";
+						reg = <0x0 0x80>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+
+					lhc: lhc@20 {
+						compatible = "aspeed,ast2500-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+					lpc_reset: reset-controller@18 {
+						compatible = "aspeed,ast2500-lpc-reset";
+						reg = <0x18 0x4>;
+						#reset-cells = <1>;
+					};
+
+					ibt: ibt@c0 {
+						compatible = "aspeed,ast2500-ibt-bmc";
+						reg = <0xc0 0x18>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+				};
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: i2c@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2500-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c-bus@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_fwspics1_default: fwspics1_default {
+		function = "FWSPICS1";
+		groups = "FWSPICS1";
+	};
+
+	pinctrl_fwspics2_default: fwspics2_default {
+		function = "FWSPICS2";
+		groups = "FWSPICS2";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lad0_default: lad0_default {
+		function = "LAD0";
+		groups = "LAD0";
+	};
+
+	pinctrl_lad1_default: lad1_default {
+		function = "LAD1";
+		groups = "LAD1";
+	};
+
+	pinctrl_lad2_default: lad2_default {
+		function = "LAD2";
+		groups = "LAD2";
+	};
+
+	pinctrl_lad3_default: lad3_default {
+		function = "LAD3";
+		groups = "LAD3";
+	};
+
+	pinctrl_lclk_default: lclk_default {
+		function = "LCLK";
+		groups = "LCLK";
+	};
+
+	pinctrl_lframe_default: lframe_default {
+		function = "LFRAME";
+		groups = "LFRAME";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcplus_default: lpcplus_default {
+		function = "LPCPLUS";
+		groups = "LPCPLUS";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pnor_default: pnor_default {
+		function = "PNOR";
+		groups = "PNOR";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10_default: salt10_default {
+		function = "SALT10";
+		groups = "SALT10";
+	};
+
+	pinctrl_salt11_default: salt11_default {
+		function = "SALT11";
+		groups = "SALT11";
+	};
+
+	pinctrl_salt12_default: salt12_default {
+		function = "SALT12";
+		groups = "SALT12";
+	};
+
+	pinctrl_salt13_default: salt13_default {
+		function = "SALT13";
+		groups = "SALT13";
+	};
+
+	pinctrl_salt14_default: salt14_default {
+		function = "SALT14";
+		groups = "SALT14";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9_default: salt9_default {
+		function = "SALT9";
+		groups = "SALT9";
+	};
+
+	pinctrl_scl1_default: scl1_default {
+		function = "SCL1";
+		groups = "SCL1";
+	};
+
+	pinctrl_scl2_default: scl2_default {
+		function = "SCL2";
+		groups = "SCL2";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sda1_default: sda1_default {
+		function = "SDA1";
+		groups = "SDA1";
+	};
+
+	pinctrl_sda2_default: sda2_default {
+		function = "SDA2";
+		groups = "SDA2";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spi2ck_default: spi2ck_default {
+		function = "SPI2CK";
+		groups = "SPI2CK";
+	};
+
+	pinctrl_spi2cs0_default: spi2cs0_default {
+		function = "SPI2CS0";
+		groups = "SPI2CS0";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2miso_default: spi2miso_default {
+		function = "SPI2MISO";
+		groups = "SPI2MISO";
+	};
+
+	pinctrl_spi2mosi_default: spi2mosi_default {
+		function = "SPI2MOSI";
+		groups = "SPI2MOSI";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USB2AH";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USB11BHID";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USB2BH";
+	};
+
+	pinctrl_vgabiosrom_default: vgabiosrom_default {
+		function = "VGABIOSROM";
+		groups = "VGABIOSROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpo_default: vpo_default {
+		function = "VPO";
+		groups = "VPO";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ast2600-evb.dts b/roms/u-boot/arch/arm/dts/ast2600-evb.dts
new file mode 100644
index 000000000..2abd31341
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ast2600-evb.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "ast2600-u-boot.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	aliases {
+		mmc0 = &emmc_slot0;
+		mmc1 = &sdhci_slot0;
+		mmc2 = &sdhci_slot1;
+		spi0 = &fmc;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		ethernet2 = &mac2;
+		ethernet3 = &mac3;
+	};
+
+	cpus {
+		cpu@0 {
+			clock-frequency = <800000000>;
+		};
+		cpu@1 {
+			clock-frequency = <800000000>;
+		};
+	};
+};
+
+&uart5 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdrammc {
+	clock-frequency = <400000000>;
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fmcquad_default>;
+
+	flash@0 {
+		compatible = "spi-flash", "sst,w25q256";
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+
+	flash@1 {
+		compatible = "spi-flash", "sst,w25q256";
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+
+	flash@2 {
+		compatible = "spi-flash", "sst,w25q256";
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1abr_default
+			&pinctrl_spi1cs1_default &pinctrl_spi1wp_default
+			&pinctrl_spi1wp_default &pinctrl_spi1quad_default>;
+
+	flash@0 {
+		compatible = "spi-flash", "sst,w25q256";
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+			&pinctrl_spi2cs2_default &pinctrl_spi2quad_default>;
+
+	flash@0 {
+		compatible = "spi-flash", "sst,w25q256";
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+	timing-phase = <0x700ff>;
+};
+
+&emmc_slot0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emmc_default>;
+	sdhci-drive-type = <1>;
+};
+
+&i2c4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5_default>;
+};
+
+&i2c5 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6_default>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c7_default>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c8_default>;
+};
+
+&i2c8 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c9_default>;
+};
+
+&scu {
+	mac0-clk-delay = <0x1d 0x1c
+			  0x10 0x17
+			  0x10 0x17>;
+	mac1-clk-delay = <0x1d 0x10
+			  0x10 0x10
+			  0x10 0x10>;
+	mac2-clk-delay = <0x0a 0x04
+			  0x08 0x04
+			  0x08 0x04>;
+	mac3-clk-delay = <0x0a 0x04
+			  0x08 0x04
+			  0x08 0x04>;
+};
diff --git a/roms/u-boot/arch/arm/dts/ast2600-u-boot.dtsi b/roms/u-boot/arch/arm/dts/ast2600-u-boot.dtsi
new file mode 100644
index 000000000..4648c0743
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ast2600-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/ast2600-clock.h>
+#include <dt-bindings/reset/ast2600-reset.h>
+
+#include "ast2600.dtsi"
+
+/ {
+	scu: clock-controller@1e6e2000 {
+		compatible = "aspeed,ast2600-scu";
+		reg = <0x1e6e2000 0x1000>;
+		u-boot,dm-pre-reloc;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		uart-clk-source = <0x0>; /* uart clock source selection: 0: uxclk 1: huxclk*/
+	};
+
+	rst: reset-controller {
+		u-boot,dm-pre-reloc;
+		compatible = "aspeed,ast2600-reset";
+		aspeed,wdt = <&wdt1>;
+		#reset-cells = <1>;
+	};
+
+	sdrammc: sdrammc@1e6e0000 {
+		u-boot,dm-pre-reloc;
+		compatible = "aspeed,ast2600-sdrammc";
+		reg = <0x1e6e0000 0x100
+			0x1e6e0100 0x300
+			0x1e6e0400 0x200 >;
+		#reset-cells = <1>;
+		clocks = <&scu ASPEED_CLK_MPLL>;
+		resets = <&rst ASPEED_RESET_SDRAM>;
+	};
+
+	ahb {
+		u-boot,dm-pre-reloc;
+
+		apb {
+			u-boot,dm-pre-reloc;
+		};
+
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/ast2600.dtsi b/roms/u-boot/arch/arm/dts/ast2600.dtsi
new file mode 100644
index 000000000..ac0f08b7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ast2600.dtsi
@@ -0,0 +1,1946 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+		serial9 = &uart10;
+		serial10 = &uart11;
+		serial11 = &uart12;
+		serial12 = &uart13;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "aspeed,ast2600-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			no-map;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges;
+
+		gic: interrupt-controller@40461000 {
+				compatible = "arm,cortex-a7-gic";
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				interrupt-parent = <&gic>;
+				reg = <0x40461000 0x1000>,
+					  <0x40462000 0x1000>,
+					  <0x40464000 0x2000>,
+					  <0x40466000 0x2000>;
+		};
+
+		ahbc: ahbc@1e600000 {
+			compatible = "aspeed,aspeed-ahbc";
+			reg = < 0x1e600000 0x100>;
+		};
+
+		fmc: flash-controller@1e620000 {
+			reg = < 0x1e620000 0xc4
+				0x20000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-fmc";
+			status = "disabled";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_AHB>;
+			num-cs = <3>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		spi1: flash-controller@1e630000 {
+			reg = < 0x1e630000 0xc4
+				0x30000000 0x08000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&scu ASPEED_CLK_AHB>;
+			num-cs = <2>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		spi2: flash-controller@1e631000 {
+			reg = < 0x1e631000 0xc4
+				0x50000000 0x08000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&scu ASPEED_CLK_AHB>;
+			num-cs = <3>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		edac: sdram@1e6e0000 {
+			compatible = "aspeed,ast2600-sdram-edac";
+			reg = <0x1e6e0000 0x174>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mdio: ethernet@1e650000 {
+			compatible = "aspeed,aspeed-mdio";
+			reg = <0x1e650000 0x40>;
+			resets = <&rst ASPEED_RESET_MII>;
+			status = "disabled";
+		};
+
+		mac0: ftgmac@1e660000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>, <0x1e650000 0x4>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ftgmac@1e680000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>, <0x1e650008 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		mac2: ftgmac@1e670000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e670000 0x180>, <0x1e650010 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_GATE_MAC3CLK>;
+			status = "disabled";
+		};
+
+		mac3: ftgmac@1e690000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e690000 0x180>, <0x1e650018 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_GATE_MAC4CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,aspeed-ehci", "usb-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,aspeed-ehci", "usb-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,g6-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+
+				pinctrl: pinctrl {
+					compatible = "aspeed,g6-pinctrl";
+					aspeed,external-nodes = <&gfx &lhc>;
+
+				};
+
+				vga_scratch: scratch {
+					compatible = "aspeed,bmc-misc";
+				};
+
+				scu_ic0: interrupt-controller@0 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic";
+					reg = <0x560 0x10>;
+					interrupt-parent = <&gic>;
+					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+				scu_ic1: interrupt-controller@1 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic";
+					reg = <0x570 0x10>;
+					interrupt-parent = <&gic>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+			};
+
+			smp-memram@0 {
+				compatible = "aspeed,ast2600-smpmem", "syscon";
+				reg = <0x1e6e2180 0x40>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+			};
+
+			pcie_bridge0: pcie@1e6ed000 {
+				compatible = "aspeed,ast2600-pcie";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				reg = <0x1e6ed000 0x100>;
+				ranges = <0x81000000 0x0 0x0 0x0 0x0 0x10000>,
+					 <0x82000000 0x0 0x60000000 0x60000000 0x0 0x10000000>;
+				device_type = "pci";
+				bus-range = <0x00 0xff>;
+				resets = <&rst ASPEED_RESET_PCIE_DEV_O>;
+				cfg-handle = <&pcie_cfg0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pcie0rc_default>;
+
+				status = "disabled";
+			};
+
+			pcie_bridge1: pcie@1e6ed200 {
+				compatible = "aspeed,ast2600-pcie";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				reg = <0x1e6ed200 0x100>;
+				ranges = <0x81000000 0x0 0x0 0x10000 0x00 0x10000>,
+					 <0x82000000 0x0 0x70000000 0x70000000 0x0 0x10000000>;
+				device_type = "pci";
+				bus-range = <0x00 0xff>;
+				resets = <&rst ASPEED_RESET_PCIE_RC_O>;
+				cfg-handle = <&pcie_cfg1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pcie1rc_default>;
+
+				status = "disabled";
+			};
+
+			sdhci: sdhci@1e740000 {
+				#interrupt-cells = <1>;
+				compatible = "aspeed,aspeed-sdhci-irq", "simple-mfd";
+				reg = <0x1e740000 0x1000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				clocks = <&scu ASPEED_CLK_GATE_SDCLK>,
+					 <&scu ASPEED_CLK_GATE_SDEXTCLK>;
+				clock-names = "ctrlclk", "extclk";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e740000 0x1000>;
+
+				sdhci_slot0: sdhci_slot0@100 {
+					compatible = "aspeed,sdhci-ast2600";
+					reg = <0x100 0x100>;
+					interrupts = <0>;
+					interrupt-parent = <&sdhci>;
+					sdhci,auto-cmd12;
+					clocks = <&scu ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci_slot1: sdhci_slot1@200 {
+					compatible = "aspeed,sdhci-ast2600";
+					reg = <0x200 0x100>;
+					interrupts = <1>;
+					interrupt-parent = <&sdhci>;
+					sdhci,auto-cmd12;
+					clocks = <&scu ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			emmc: emmc@1e750000 {
+				#interrupt-cells = <1>;
+				compatible = "aspeed,aspeed-emmc-irq", "simple-mfd";
+				reg = <0x1e750000 0x1000>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				clocks = <&scu ASPEED_CLK_GATE_EMMCCLK>,
+					 <&scu ASPEED_CLK_GATE_EMMCEXTCLK>;
+				clock-names = "ctrlclk", "extclk";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e750000 0x1000>;
+
+				emmc_slot0: emmc_slot0@100 {
+					compatible = "aspeed,emmc-ast2600";
+					reg = <0x100 0x100>;
+					interrupts = <0>;
+					interrupt-parent = <&emmc>;
+					clocks = <&scu ASPEED_CLK_EMMC>;
+					status = "disabled";
+				};
+			};
+
+			h2x: h2x@1e770000 {
+				compatible = "aspeed,ast2600-h2x";
+				reg = <0x1e770000 0x100>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rst ASPEED_RESET_H2X>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e770000 0x100>;
+
+				status = "disabled";
+
+				pcie_cfg0: cfg0@80 {
+					reg = <0x80 0x80>;
+					compatible = "aspeed,ast2600-pcie-cfg";
+				};
+
+				pcie_cfg1: cfg1@C0 {
+					compatible = "aspeed,ast2600-pcie-cfg";
+					reg = <0xC0 0x80>;
+				};
+			};
+
+			gpio0: gpio@1e780000 {
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				gpio-ranges = <&pinctrl 0 0 220>;
+				ngpios = <208>;
+			};
+
+			gpio1: gpio@1e780800 {
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780800 0x800>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				gpio-ranges = <&pinctrl 0 0 208>;
+				ngpios = <36>;
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART1CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART5CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785000 0x40>;
+			};
+
+			wdt2: watchdog@1e785040 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785040 0x40>;
+			};
+
+			wdt3: watchdog@1e785080 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785080 0x40>;
+			};
+
+			wdt4: watchdog@1e7850C0 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e7850C0 0x40>;
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2600-lpc", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs1@0 {
+					compatible = "aspeed,ast2600-kcs-bmc";
+					reg = <0x0 0x80>;
+					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <1>;
+					kcs_addr = <0xCA0>;
+					status = "disabled";
+				};
+
+				kcs2: kcs2@0 {
+					compatible = "aspeed,ast2600-kcs-bmc";
+					reg = <0x0 0x80>;
+					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <2>;
+					kcs_addr = <0xCA8>;
+					status = "disabled";
+				};
+
+				kcs3: kcs3@0 {
+					compatible = "aspeed,ast2600-kcs-bmc";
+					reg = <0x0 0x80>;
+					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <3>;
+					kcs_addr = <0xCA2>;
+				};
+
+				kcs4: kcs4@0 {
+					compatible = "aspeed,ast2600-kcs-bmc";
+					reg = <0x0 0x120>;
+					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <4>;
+					kcs_addr = <0xCA4>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2600-lpc-ctrl";
+					reg = <0x80 0x80>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@80 {
+					compatible = "aspeed,ast2600-lpc-snoop";
+					reg = <0x80 0x80>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2600-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2600-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+					status = "disabled";
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2600-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sio_regs: regs {
+					compatible = "aspeed,bmc-misc";
+				};
+
+				mbox: mbox@200 {
+					compatible = "aspeed,ast2600-mbox";
+					reg = <0x200 0x5c>;
+					interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+					#mbox-cells = <1>;
+					status = "disabled";
+				};
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART2CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART3CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART4CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+
+			fsim0: fsi@1e79b000 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b000 0x94>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi1_default>;
+				clocks = <&scu ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			fsim1: fsi@1e79b100 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b100 0x94>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi2_default>;
+				clocks = <&scu ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART6CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART7CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART8CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART9CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart10: serial@1e790400 {
+				compatible = "ns16550a";
+				reg = <0x1e790400 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART10CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart11: serial@1e790500 {
+				compatible = "ns16550a";
+				reg = <0x1e790400 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART11CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart12: serial@1e790600 {
+				compatible = "ns16550a";
+				reg = <0x1e790600 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART12CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart13: serial@1e790700 {
+				compatible = "ns16550a";
+				reg = <0x1e790700 0x20>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scu ASPEED_CLK_GATE_UART13CLK>;
+				clock-frequency = <1846154>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			display_port: dp@1e6eb000 {
+				compatible = "aspeed,ast2600-displayport";
+				reg = <0x1e6eb000 0x200>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rst ASPEED_RESET_DP> ,<&rst ASPEED_RESET_DP_MCU>;
+				status = "disabled";
+			};
+
+		};
+
+	};
+
+};
+
+&i2c {
+	i2cglobal: i2cg@00 {
+		compatible = "aspeed,ast2600-i2c-global";
+		reg = <0x0 0x40>;
+		resets = <&rst ASPEED_RESET_I2C>;
+#if 0
+		new-mode;
+#endif
+	};
+
+	i2c0: i2c@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x80 0xC00 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x80 0xC20 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x80 0xC40 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+	};
+
+	i2c3: i2c@200 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x200 0x40 0xC60 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+	};
+
+	i2c4: i2c@280 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x280 0x80 0xC80 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+	};
+
+	i2c5: i2c@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40 0xCA0 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+	};
+
+	i2c6: i2c@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x80 0xCC0 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+	};
+
+	i2c7: i2c@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x80 0xCE0 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+	};
+
+	i2c8: i2c@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x80 0xD00 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+	};
+
+	i2c9: i2c@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x500 0x80 0xD20 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+	i2c10: i2c@580 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x580 0x80 0xD40 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+	i2c11: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x600 0x80 0xD60 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+	i2c12: i2c@680 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x680 0x80 0xD80 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+	i2c13: i2c@700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x700 0x80 0xDA0 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+	i2c14: i2c@780 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x780 0x80 0xDC0 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+	i2c15: i2c@800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x800 0x80 0xDE0 0x20>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		bus-frequency = <100000>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scu ASPEED_CLK_APB2>;
+		status = "disabled";
+	};
+
+};
+
+&pinctrl {
+	pinctrl_fmcquad_default: fmcquad_default {
+		function = "FMCQUAD";
+		groups = "FMCQUAD";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1abr_default: spi1abr_default {
+		function = "SPI1ABR";
+		groups = "SPI1ABR";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1wp_default: spi1wp_default {
+		function = "SPI1WP";
+		groups = "SPI1WP";
+	};
+
+	pinctrl_spi1quad_default: spi1quad_default {
+		function = "SPI1QUAD";
+		groups = "SPI1QUAD";
+	};
+
+	pinctrl_spi2_default: spi2_default {
+		function = "SPI2";
+		groups = "SPI2";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2cs2_default: spi2cs2_default {
+		function = "SPI2CS2";
+		groups = "SPI2CS2";
+	};
+
+	pinctrl_spi2quad_default: spi2quad_default {
+		function = "SPI2QUAD";
+		groups = "SPI2QUAD";
+	};
+
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_fsi1_default: fsi1_default {
+		function = "FSI1";
+		groups = "FSI1";
+	};
+
+	pinctrl_fsi2_default: fsi2_default {
+		function = "FSI2";
+		groups = "FSI2";
+	};
+
+	pinctrl_fwspics1_default: fwspics1_default {
+		function = "FWSPICS1";
+		groups = "FWSPICS1";
+	};
+
+	pinctrl_fwspics2_default: fwspics2_default {
+		function = "FWSPICS2";
+		groups = "FWSPICS2";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		function = "I2C1";
+		groups = "I2C1";
+	};
+	pinctrl_i2c2_default: i2c2_default {
+		function = "I2C2";
+		groups = "I2C2";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c15_default: i2c15_default {
+		function = "I2C15";
+		groups = "I2C15";
+	};
+
+	pinctrl_i2c16_default: i2c16_default {
+		function = "I2C16";
+		groups = "I2C16";
+	};
+
+	pinctrl_lad0_default: lad0_default {
+		function = "LAD0";
+		groups = "LAD0";
+	};
+
+	pinctrl_lad1_default: lad1_default {
+		function = "LAD1";
+		groups = "LAD1";
+	};
+
+	pinctrl_lad2_default: lad2_default {
+		function = "LAD2";
+		groups = "LAD2";
+	};
+
+	pinctrl_lad3_default: lad3_default {
+		function = "LAD3";
+		groups = "LAD3";
+	};
+
+	pinctrl_lclk_default: lclk_default {
+		function = "LCLK";
+		groups = "LCLK";
+	};
+
+	pinctrl_lframe_default: lframe_default {
+		function = "LFRAME";
+		groups = "LFRAME";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcplus_default: lpcplus_default {
+		function = "LPCPLUS";
+		groups = "LPCPLUS";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mac3link_default: mac3link_default {
+		function = "MAC3LINK";
+		groups = "MAC3LINK";
+	};
+
+	pinctrl_mac4link_default: mac4link_default {
+		function = "MAC4LINK";
+		groups = "MAC4LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_mdio3_default: mdio3_default {
+		function = "MDIO3";
+		groups = "MDIO3";
+	};
+
+	pinctrl_mdio4_default: mdio4_default {
+		function = "MDIO4";
+		groups = "MDIO4";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rmii3_default: rmii3_default {
+		function = "RMII3";
+		groups = "RMII3";
+	};
+
+	pinctrl_rmii4_default: rmii4_default {
+		function = "RMII4";
+		groups = "RMII4";
+	};
+
+	pinctrl_rmii1rclk_default: rmii1rclk_default {
+		function = "RMII1RCLK";
+		groups = "RMII1RCLK";
+	};
+
+	pinctrl_rmii2rclk_default: rmii2rclk_default {
+		function = "RMII2RCLK";
+		groups = "RMII2RCLK";
+	};
+
+	pinctrl_rmii3rclk_default: rmii3rclk_default {
+		function = "RMII3RCLK";
+		groups = "RMII3RCLK";
+	};
+
+	pinctrl_rmii4rclk_default: rmii4rclk_default {
+		function = "RMII4RCLK";
+		groups = "RMII4RCLK";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pnor_default: pnor_default {
+		function = "PNOR";
+		groups = "PNOR";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rgmii3_default: rgmii3_default {
+		function = "RGMII3";
+		groups = "RGMII3";
+	};
+
+	pinctrl_rgmii4_default: rgmii4_default {
+		function = "RGMII4";
+		groups = "RGMII4";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10_default: salt10_default {
+		function = "SALT10";
+		groups = "SALT10";
+	};
+
+	pinctrl_salt11_default: salt11_default {
+		function = "SALT11";
+		groups = "SALT11";
+	};
+
+	pinctrl_salt12_default: salt12_default {
+		function = "SALT12";
+		groups = "SALT12";
+	};
+
+	pinctrl_salt13_default: salt13_default {
+		function = "SALT13";
+		groups = "SALT13";
+	};
+
+	pinctrl_salt14_default: salt14_default {
+		function = "SALT14";
+		groups = "SALT14";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9_default: salt9_default {
+		function = "SALT9";
+		groups = "SALT9";
+	};
+
+	pinctrl_scl1_default: scl1_default {
+		function = "SCL1";
+		groups = "SCL1";
+	};
+
+	pinctrl_scl2_default: scl2_default {
+		function = "SCL2";
+		groups = "SCL2";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_emmc_default: emmc_default {
+		function = "EMMC";
+		groups = "EMMC";
+	};
+
+	pinctrl_emmcg8_default: emmcg8_default {
+		function = "EMMCG8";
+		groups = "EMMCG8";
+	};
+
+	pinctrl_sda1_default: sda1_default {
+		function = "SDA1";
+		groups = "SDA1";
+	};
+
+	pinctrl_sda2_default: sda2_default {
+		function = "SDA2";
+		groups = "SDA2";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spi2ck_default: spi2ck_default {
+		function = "SPI2CK";
+		groups = "SPI2CK";
+	};
+
+	pinctrl_spi2cs0_default: spi2cs0_default {
+		function = "SPI2CS0";
+		groups = "SPI2CS0";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2miso_default: spi2miso_default {
+		function = "SPI2MISO";
+		groups = "SPI2MISO";
+	};
+
+	pinctrl_spi2mosi_default: spi2mosi_default {
+		function = "SPI2MOSI";
+		groups = "SPI2MOSI";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USB2AH";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USB11BHID";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USB2BH";
+	};
+
+	pinctrl_vgabiosrom_default: vgabiosrom_default {
+		function = "VGABIOSROM";
+		groups = "VGABIOSROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpo_default: vpo_default {
+		function = "VPO";
+		groups = "VPO";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+
+	pinctrl_pcie0rc_default: pcie0rc_default {
+		function = "PCIE0RC";
+		groups = "PCIE0RC";
+	};
+
+	pinctrl_pcie1rc_default: pcie1rc_default {
+		function = "PCIE1RC";
+		groups = "PCIE1RC";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d27_giantboard.dts b/roms/u-boot/arch/arm/dts/at91-sama5d27_giantboard.dts
new file mode 100644
index 000000000..e81ca60ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d27_giantboard.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-sama5d27_giantboard.dts - Device Tree file for Giant Board
+ *
+ * Copyright (C) 2020 Greg Gallagher <greg@embeddedgreg.com>
+ *
+ * Derived from at91-sama5d27_som1_ek.dts
+ *
+ * Copyright (C) 2017 Microchip Corporation
+ *		      Wenyou Yang <wenyou.yang@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+	model = "Giant Board";
+	compatible = "atmel,sama5d27-giantboard", "atmel,sama5d2", "atmel,sama5";
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &uart1;
+	};
+
+	ahb {
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
+			status = "okay";
+			u-boot,dm-pre-reloc;
+		};
+
+		apb {
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			i2c0: i2c@f8028000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				status = "okay";
+			};
+
+			i2c1: i2c@fc028000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				status = "okay";
+
+				pmic@5b {
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-low;
+					status = "okay";
+				};
+			};
+
+			pit: timer@f8048030 {
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			sfr: sfr@f8030000 {
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			pioA: gpio@fc038000 {
+				pinctrl {
+
+					pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_uart1_default: uart1_default {
+						pinmux = <PIN_PD2__URXD1>,
+							 <PIN_PD3__UTXD1>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_i2c0_default: i2c0_default {
+						pinmux = <PIN_PD21__TWD0>,
+							 <PIN_PD22__TWCK0>;
+						bias-disable;
+					};
+
+					pinctrl_i2c1_default: i2c1_default {
+						pinmux = <PIN_PD4__TWD1>,
+							 <PIN_PD5__TWCK1>;
+						bias-disable;
+					};
+
+					pinctrl_usb_default: usb_default {
+						pinmux = <PIN_PB10__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						pinmux = <PIN_PA31__GPIO>;
+						bias-disable;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d27_som1_ek.dts b/roms/u-boot/arch/arm/dts/at91-sama5d27_som1_ek.dts
new file mode 100644
index 000000000..4cd6db66f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d27_som1_ek.dts
@@ -0,0 +1,232 @@
+/*
+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27 SOM1 EK board
+ *
+ *  Copyright (C) 2017 Microchip Corporation
+ *                     Wenyou Yang <wenyou.yang@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d27_som1.dtsi"
+
+/ {
+	model = "Atmel SAMA5D27 SOM1 EK";
+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d2", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &uart1;
+	};
+
+	onewire_tm: onewire {
+		gpios = <&pioA 17 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_onewire_tm_default>;
+		status = "okay";
+
+		w1_eeprom: w1_eeprom@0 {
+			compatible = "maxim,ds24b33";
+			status = "okay";
+		};
+	};
+
+	ahb {
+		usb1: ohci@00400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioA 42 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@00500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
+			status = "okay";
+			u-boot,dm-pre-reloc;
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
+			status = "okay"; /* conflict with qspi0 */
+			u-boot,dm-pre-reloc;
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					480x272 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hsync-len = <41>;
+						hfront-porch = <2>;
+						hback-porch = <2>;
+						vfront-porch = <2>;
+						vback-porch = <2>;
+						vsync-len = <11>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			pioA: gpio@fc038000 {
+				pinctrl {
+					pinctrl_lcd_base: pinctrl_lcd_base {
+						pinmux = <PIN_PC5__LCDVSYNC>,
+							 <PIN_PC6__LCDHSYNC>,
+							 <PIN_PC8__LCDDEN>,
+							 <PIN_PC7__LCDPCK>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_pwm: pinctrl_lcd_pwm {
+						pinmux = <PIN_PC3__LCDPWM>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
+						pinmux = <PIN_PB13__LCDDAT2>,
+							 <PIN_PB14__LCDDAT3>,
+							 <PIN_PB15__LCDDAT4>,
+							 <PIN_PB16__LCDDAT5>,
+							 <PIN_PB17__LCDDAT6>,
+							 <PIN_PB18__LCDDAT7>,
+							 <PIN_PB21__LCDDAT10>,
+							 <PIN_PB22__LCDDAT11>,
+							 <PIN_PB23__LCDDAT12>,
+							 <PIN_PB24__LCDDAT13>,
+							 <PIN_PB25__LCDDAT14>,
+							 <PIN_PB26__LCDDAT15>,
+							 <PIN_PB29__LCDDAT18>,
+							 <PIN_PB30__LCDDAT19>,
+							 <PIN_PB31__LCDDAT20>,
+							 <PIN_PC0__LCDDAT21>,
+							 <PIN_PC1__LCDDAT22>,
+							 <PIN_PC2__LCDDAT23>;
+						bias-disable;
+					};
+
+					pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_uart1_default: uart1_default {
+						pinmux = <PIN_PD2__URXD1>,
+							 <PIN_PD3__UTXD1>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_usb_default: usb_default {
+						pinmux = <PIN_PB10__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						pinmux = <PIN_PA31__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_onewire_tm_default: onewire_tm_default {
+						pinmux = <PIN_PA17__GPIO>;
+						bias-pull-up;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi b/roms/u-boot/arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi
new file mode 100644
index 000000000..8c84dd08f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek-u-boot.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&hlcdc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi1 {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi1_flash {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&sfr {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_sdmmc0_cmd_dat_default {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_sdmmc0_ck_cd_default {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0_default {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_qspi1_default {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts b/roms/u-boot/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 000000000..ab23f5c20
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "sama5d27_wlsom1.dtsi"
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d2", "atmel,sama5";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	onewire_tm: onewire {
+		gpios = <&pioA PIN_PC9 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_onewire_tm_default>;
+		status = "okay";
+
+		w1_eeprom: w1_eeprom@0 {
+			compatible = "maxim,ds24b33";
+			status = "okay";
+		};
+	};
+
+	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
+			status = "okay";
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,output-mode = <24>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+				status = "okay";
+
+				display-timings {
+					800x480 {
+						clock-frequency = <33300000>;
+						xres = <800>;
+						yres = <480>;
+						hactive = <800>;
+						vactive = <480>;
+						hsync-len = <64>;
+						hfront-porch = <1>;
+						hback-porch = <64>;
+						vfront-porch = <1>;
+						vback-porch = <22>;
+						vsync-len = <23>;
+					};
+				};
+			};
+
+			qspi1: spi@f0024000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				status = "okay";
+			};
+
+			uart0: serial@f801c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0_default>;
+				status = "okay";
+			};
+
+			pioA: gpio@fc038000 {
+				pinctrl {
+					pinctrl_lcd_base: pinctrl_lcd_base {
+						pinmux = <PIN_PC30__LCDVSYNC>,
+							 <PIN_PC31__LCDHSYNC>,
+							 <PIN_PD1__LCDDEN>,
+							 <PIN_PD0__LCDPCK>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_pwm: pinctrl_lcd_pwm {
+						pinmux = <PIN_PC28__LCDPWM>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
+						pinmux = <PIN_PC10__LCDDAT2>,
+							 <PIN_PC11__LCDDAT3>,
+							 <PIN_PC12__LCDDAT4>,
+							 <PIN_PC13__LCDDAT5>,
+							 <PIN_PC14__LCDDAT6>,
+							 <PIN_PC15__LCDDAT7>,
+							 <PIN_PC16__LCDDAT10>,
+							 <PIN_PC17__LCDDAT11>,
+							 <PIN_PC18__LCDDAT12>,
+							 <PIN_PC19__LCDDAT13>,
+							 <PIN_PC20__LCDDAT14>,
+							 <PIN_PC21__LCDDAT15>,
+							 <PIN_PC22__LCDDAT18>,
+							 <PIN_PC23__LCDDAT19>,
+							 <PIN_PC24__LCDDAT20>,
+							 <PIN_PC25__LCDDAT21>,
+							 <PIN_PC26__LCDDAT22>,
+							 <PIN_PC27__LCDDAT23>;
+						bias-disable;
+					};
+
+					pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>;
+						bias-disable;
+					};
+
+					pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA12__SDMMC0_WP>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+
+					pinctrl_uart0_default: uart0_default {
+						pinmux = <PIN_PB26__URXD0>,
+							 <PIN_PB27__UTXD0>;
+						bias-disable;
+					};
+
+					pinctrl_onewire_tm_default: onewire_tm_default {
+						pinmux = <PIN_PC9__GPIO>;
+						bias-pull-up;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d2_icp-u-boot.dtsi b/roms/u-boot/arch/arm/dts/at91-sama5d2_icp-u-boot.dtsi
new file mode 100644
index 000000000..347fa813e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d2_icp-u-boot.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d2_icp-for-uboot.dtsi - Device Tree file for SAMA5D2 ICP board
+ *			SAMA5D2 Industrial Connectivity Platform
+ *
+ *  Copyright (c) 2019, Microchip Technology Inc. and its subsidiaries
+ *                2019, Eugen Hristev <eugen.hristev@microchip.com>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&sdmmc0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 { /* mikrobus1 uart */
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_sdmmc0_default {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_mikrobus1_uart {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d2_icp.dts b/roms/u-boot/arch/arm/dts/at91-sama5d2_icp.dts
new file mode 100644
index 000000000..f81fa6017
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d2_icp.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2 ICP board
+ *			SAMA5D2 Industrial Connectivity Board
+ *
+ *  Copyright (c) 2018, Microchip Technology Inc.
+ *                2018, Eugen Hristev <eugen.hristev@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+	model = "Microchip SAMA5D2 ICP";
+	compatible = "atmel,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;
+		i2c1	= &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ahb {
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		apb {
+			uart0: serial@f801c000 { /* mikrobus1 uart */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
+				phy-mode = "internal";
+				status = "okay";
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				status = "okay";
+
+				eeprom@50 {
+					compatible = "microchip,24aa02e48";
+					reg = <0x50>;
+					pagesize = <16>;
+				};
+
+				eeprom@52 {
+					compatible = "microchip,24aa02e48";
+					reg = <0x52>;
+					pagesize = <16>;
+				};
+
+				eeprom@53 {
+					compatible = "microchip,24aa02e48";
+					reg = <0x53>;
+					pagesize = <16>;
+				};
+			};
+			pioA: gpio@fc038000 {
+				status = "okay";
+				pinctrl {
+					pinctrl_i2c1_default: i2c1_default {
+						pinmux = <PIN_PD19__TWD1>,
+							 <PIN_PD20__TWCK1>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_rmii: macb0_rmii {
+						pinmux = <PIN_PD1__GRXCK>,
+							 <PIN_PD2__GTXER>,
+							 <PIN_PD5__GRX2>,
+							 <PIN_PD6__GRX3>,
+							 <PIN_PD7__GTX2>,
+							 <PIN_PD8__GTX3>,
+							 <PIN_PD9__GTXCK>,
+							 <PIN_PD10__GTXEN>,
+							 <PIN_PD11__GRXDV>,
+							 <PIN_PD12__GRXER>,
+							 <PIN_PD13__GRX0>,
+							 <PIN_PD14__GRX1>,
+							 <PIN_PD15__GTX0>,
+							 <PIN_PD16__GTX1>,
+							 <PIN_PD17__GMDC>,
+							 <PIN_PD18__GMDIO>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						pinmux = <PIN_PD3__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_rst: macb0_sw_rst {
+						pinmux = <PIN_PD4__GPIO>;
+						bias-pull-up;
+					};
+
+					pinctrl_sdmmc0_default: sdmmc0_default {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+
+					pinctrl_mikrobus1_uart: mikrobus1_uart {
+						pinmux = <PIN_PB26__URXD0>,
+							 <PIN_PB27__UTXD0>;
+						bias-disable;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d2_ptc_ek.dts b/roms/u-boot/arch/arm/dts/at91-sama5d2_ptc_ek.dts
new file mode 100644
index 000000000..068a11758
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d2_ptc_ek.dts
@@ -0,0 +1,232 @@
+/*
+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
+ *
+ *  Copyright (C) 2017 Microchip Technology Inc,
+ *		       Ludovic Desroches <ludovic.desroches@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+	model = "Atmel SAMA5D2 PTC EK";
+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &uart0;
+	};
+
+	onewire_tm: onewire {
+		gpios = <&pioA PIN_PB31 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_onewire_tm_default>;
+		status = "okay";
+
+		w1_eeprom: w1_eeprom@0 {
+			compatible = "maxim,ds24b33";
+			status = "okay";
+		};
+	};
+
+	ahb {
+		usb0: gadget@00300000 {
+			atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@00500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
+			status = "okay";
+			u-boot,dm-pre-reloc;
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
+			status = "disabled"; /* conflicts with nand and qspi0*/
+			u-boot,dm-pre-reloc;
+		};
+
+		apb {
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			uart0: serial@f801c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0_default>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			i2c1: i2c@fc028000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				status = "okay";
+
+				i2c_eeprom: i2c_eeprom@50 {
+					compatible = "atmel,24mac402";
+					reg = <0x50>;
+				};
+			};
+
+			pioA: gpio@fc038000 {
+				pinctrl {
+					pinctrl_i2c1_default: i2c1_default {
+						pinmux = <PIN_PC6__TWD1>,
+							 <PIN_PC7__TWCK1>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						pinmux = <PIN_PB24__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_rmii: macb0_rmii {
+						pinmux = <PIN_PB14__GTXCK>,
+							 <PIN_PB15__GTXEN>,
+							 <PIN_PB16__GRXDV>,
+							 <PIN_PB17__GRXER>,
+							 <PIN_PB18__GRX0>,
+							 <PIN_PB19__GRX1>,
+							 <PIN_PB20__GTX0>,
+							 <PIN_PB21__GTX1>,
+							 <PIN_PB22__GMDC>,
+							 <PIN_PB23__GMDIO>;
+						bias-disable;
+					};
+
+					pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_uart0_default: uart0_default {
+						pinmux = <PIN_PB26__URXD0>,
+							 <PIN_PB27__UTXD0>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_usb_default: usb_default {
+						pinmux = <PIN_PB12__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						pinmux = <PIN_PB11__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_onewire_tm_default: onewire_tm_default {
+						pinmux = <PIN_PB31__GPIO>;
+						bias-pull-up;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d2_xplained.dts b/roms/u-boot/arch/arm/dts/at91-sama5d2_xplained.dts
new file mode 100644
index 000000000..7f0d1696b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d2_xplained.dts
@@ -0,0 +1,292 @@
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &uart1;
+	};
+
+	onewire_tm: onewire {
+		gpios = <&pioA PIN_PB0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_onewire_tm_default>;
+		status = "okay";
+
+		w1_eeprom: w1_eeprom@0 {
+			compatible = "maxim,ds24b33";
+			status = "okay";
+		};
+	};
+
+	ahb {
+		usb1: ohci@00400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioA 42 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@00500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
+			status = "okay";
+			u-boot,dm-pre-reloc;
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
+			status = "okay"; /* conflict with qspi0 */
+			u-boot,dm-pre-reloc;
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					480x272 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hsync-len = <41>;
+						hfront-porch = <2>;
+						hback-porch = <2>;
+						vfront-porch = <2>;
+						vback-porch = <2>;
+						vsync-len = <11>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
+			qspi0: spi@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi0_sck_cs_default &pinctrl_qspi0_dat_default>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				flash@0 {
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <83000000>;
+					spi-rx-bus-width = <4>;
+					spi-tx-bus-width = <4>;
+					u-boot,dm-pre-reloc;
+				};
+			};
+
+			spi0: spi@f8000000 {
+				cs-gpios = <&pioA 17 0>, <0>, <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				spi_flash@0 {
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+					u-boot,dm-pre-reloc;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			i2c1: i2c@fc028000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				status = "okay";
+
+				i2c_eeprom: i2c_eeprom@5c {
+					compatible = "atmel,24mac402";
+					reg = <0x5c>;
+				};
+			};
+
+			pioA: gpio@fc038000 {
+				pinctrl {
+					pinctrl_i2c1_default: i2c1_default {
+						pinmux = <PIN_PD4__TWD1>,
+							 <PIN_PD5__TWCK1>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_base: pinctrl_lcd_base {
+						pinmux = <PIN_PC30__LCDVSYNC>,
+							<PIN_PC31__LCDHSYNC>,
+							<PIN_PD1__LCDDEN>,
+							<PIN_PD0__LCDPCK>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_pwm: pinctrl_lcd_pwm {
+						pinmux = <PIN_PC28__LCDPWM>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
+						pinmux = <PIN_PC10__LCDDAT2>,
+							<PIN_PC11__LCDDAT3>,
+							<PIN_PC12__LCDDAT4>,
+							<PIN_PC13__LCDDAT5>,
+							<PIN_PC14__LCDDAT6>,
+							<PIN_PC15__LCDDAT7>,
+							<PIN_PC16__LCDDAT10>,
+							<PIN_PC17__LCDDAT11>,
+							<PIN_PC18__LCDDAT12>,
+							<PIN_PC19__LCDDAT13>,
+							<PIN_PC20__LCDDAT14>,
+							<PIN_PC21__LCDDAT15>,
+							<PIN_PC22__LCDDAT18>,
+							<PIN_PC23__LCDDAT19>,
+							<PIN_PC24__LCDDAT20>,
+							<PIN_PC25__LCDDAT21>,
+							<PIN_PC26__LCDDAT22>,
+							<PIN_PC27__LCDDAT23>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						pinmux = <PIN_PC9__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_rmii: macb0_rmii {
+						pinmux = <PIN_PB14__GTXCK>,
+							 <PIN_PB15__GTXEN>,
+							 <PIN_PB16__GRXDV>,
+							 <PIN_PB17__GRXER>,
+							 <PIN_PB18__GRX0>,
+							 <PIN_PB19__GRX1>,
+							 <PIN_PB20__GTX0>,
+							 <PIN_PB21__GTX1>,
+							 <PIN_PB22__GMDC>,
+							 <PIN_PB23__GMDIO>;
+						bias-disable;
+					};
+
+					pinctrl_qspi0_sck_cs_default: qspi0_sck_cs_default {
+						pinmux = <PIN_PA22__QSPI0_SCK>,
+							 <PIN_PA23__QSPI0_CS>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_qspi0_dat_default: qspi0_dat_default {
+						pinmux = <PIN_PA24__QSPI0_IO0>,
+							 <PIN_PA25__QSPI0_IO1>,
+							 <PIN_PA26__QSPI0_IO2>,
+							 <PIN_PA27__QSPI0_IO3>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_spi0_default: spi0_default {
+						pinmux = <PIN_PA14__SPI0_SPCK>,
+							 <PIN_PA15__SPI0_MOSI>,
+							 <PIN_PA16__SPI0_MISO>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_uart1_default: uart1_default {
+						pinmux = <PIN_PD2__URXD1>,
+							 <PIN_PD3__UTXD1>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_usb_default: usb_default {
+						pinmux = <PIN_PB10__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						pinmux = <PIN_PA31__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_onewire_tm_default: onewire_tm_default {
+						pinmux = <PIN_PB0__GPIO>;
+						bias-pull-up;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d3_xplained.dts b/roms/u-boot/arch/arm/dts/at91-sama5d3_xplained.dts
new file mode 100644
index 000000000..20fba5f06
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d3_xplained.dts
@@ -0,0 +1,365 @@
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	onewire_tm: onewire {
+		gpios = <&pioE 23 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_onewire_tm_default>;
+		status = "okay";
+
+		w1_eeprom: w1_eeprom@0 {
+			compatible = "maxim,ds24b33";
+			status = "okay";
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				u-boot,dm-pre-reloc;
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				u-boot,dm-pre-reloc;
+				vmmc-supply = <&vcc_3v3_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "disabled";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				pinctrl-0 = <&pinctrl_i2c0_pu>;
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				cs-gpios = <&pioC 25 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				pinctrl-0 = <&pinctrl_i2c2_pu>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_i2c0_pu: i2c0_pu {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_i2c2_pu: i2c2_pu {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+
+					pinctrl_onewire_tm_default: onewire_tm_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	vcc_mmc0_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		bp3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d4_xplained.dts b/roms/u-boot/arch/arm/dts/at91-sama5d4_xplained.dts
new file mode 100644
index 000000000..7da508686
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d4_xplained.dts
@@ -0,0 +1,332 @@
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Josh Wu <josh.wu@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4 Xplained";
+	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &usart3;
+	};
+
+	onewire_tm: onewire {
+		gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_onewire_tm_default>;
+		status = "okay";
+
+		w1_eeprom: w1_eeprom@0 {
+			compatible = "maxim,ds24b33";
+			status = "okay";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					480x272 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hsync-len = <41>;
+						hfront-porch = <2>;
+						hback-porch = <2>;
+						vfront-porch = <2>;
+						vback-porch = <2>;
+						vsync-len = <11>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
+			spi0: spi@f8010000 {
+				u-boot,dm-pre-reloc;
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				spi_flash@0 {
+					u-boot,dm-pre-reloc;
+					compatible = "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+
+				i2c_eeprom: i2c_eeprom@5c {
+					compatible = "atmel,24mac402";
+					reg = <0x5c>;
+				};
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+					reg = <1>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				u-boot,dm-pre-reloc;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 3 0>;
+				};
+			};
+
+			usart3: serial@fc00c000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 21 0>;
+				status = "okay";
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_onewire_tm_default: onewire_tm_default {
+						atmel,pins =
+							<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_HIGH
+					   &pioE 14 GPIO_ACTIVE_HIGH
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		nand0: nand@80000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+			atmel,has-pmecc;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		reg = <0 1>;
+	};
+
+	vcc_mmc1_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
+		reg = <1 1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-sama5d4ek.dts b/roms/u-boot/arch/arm/dts/at91-sama5d4ek.dts
new file mode 100644
index 000000000..c1d657814
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-sama5d4ek.dts
@@ -0,0 +1,367 @@
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &usart3;
+	};
+
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,output-mode = <18>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					800x480 {
+						clock-frequency = <33260000>;
+						hactive = <800>;
+						vactive = <480>;
+						hsync-len = <5>;
+						hfront-porch = <128>;
+						hback-porch = <0>;
+						vfront-porch = <23>;
+						vback-porch = <22>;
+						vsync-len = <5>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			ssc0: ssc@f8008000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8010000 {
+				u-boot,dm-pre-reloc;
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				spi_flash@0 {
+					u-boot,dm-pre-reloc;
+					compatible = "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck2>;
+					clock-names = "mclk";
+				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				atmel_mxt_ts@4c {
+					compatible = "atmel,atmel_mxt_ts";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
+			};
+
+			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				u-boot,dm-pre-reloc;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		nand0: nand@80000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+			atmel,has-pmecc;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		d8 {
+			label = "d8";
+			/* PE28, conflicts with usart4 rts pin */
+			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
+		};
+
+		d9 {
+			label = "d9";
+			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D4EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91-vinco.dts b/roms/u-boot/arch/arm/dts/at91-vinco.dts
new file mode 100644
index 000000000..bf17b0a5e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91-vinco.dts
@@ -0,0 +1,248 @@
+/*
+ * Device Tree file for VInCo platform
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "L+G VInCo platform";
+	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+
+			adc0: adc@fc034000 {
+				status = "okay"; /* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+					     &pinctrl_mmc0_dat1_3
+					     &pinctrl_mmc0_dat4_7>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				vmmc-supply = <&vcc_3v3_reg>;
+				no-1-8-v;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					non-removable;
+					broken-cd;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "n25q32b", "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8018000 {
+				status = "okay";
+				/* kerkey security module */
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+					interrupt-parent = <&pioB>;
+					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+				};
+
+			};
+
+			i2c2: i2c@f8024000 {
+				status = "okay";
+
+				rtc1: rtc@32 {
+					compatible = "epson,rx8900";
+					reg = <0x32>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				/* MBUS */
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				/* debug */
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				/* LMN */
+				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb1: ethernet@fc028000 {
+				phy-mode = "rmii";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led_err {
+			label = "err";
+			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_rssi {
+			label = "rssi";
+			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_tls {
+			label = "tls";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_lmc {
+			label = "lmc";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_wmt {
+			label = "wmt";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_pwr {
+			label = "pwr";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9260-smartweb.dts b/roms/u-boot/arch/arm/dts/at91sam9260-smartweb.dts
new file mode 100644
index 000000000..a22de2d92
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9260-smartweb.dts
@@ -0,0 +1,113 @@
+/*
+ * at91sam9260-smartweb.dts
+ * (C) Copyright 2016
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Siemens smartweb";
+	compatible = "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
+					};
+
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				timeout-sec = <15>;
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9260.dtsi b/roms/u-boot/arch/arm/dts/at91sam9260.dtsi
new file mode 100644
index 000000000..800d96eb2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9260.dtsi
@@ -0,0 +1,1049 @@
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9260 family SoC";
+	compatible = "atmel,at91sam9260";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		spi0 = &spi0;
+	};
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <5000000>;
+		};
+	};
+
+	sram0: sram@002ff000 {
+		compatible = "mmio-sram";
+		reg = <0x002ff000 0x2000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9260-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					clocks = <&main_osc>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "fixed-clock";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9260-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_xtal>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
+								<150000000 240000000 2 1>;
+				};
+
+				pllb: pllbck@1 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <1000000 5000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+					atmel,clk-output-range = <0 105000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91rm9200-clk-usb";
+					#clock-cells = <0>;
+					atmel,clk-divisors = <1 2 4 0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+					pioA_clk: pioA_clk@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioB_clk: pioB_clk@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioC_clk: pioC_clk@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						u-boot,dm-pre-reloc;
+					};
+
+					adc_clk: adc_clk@5 {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart0_clk: usart0_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					mci0_clk: mci0_clk@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					udc_clk: udc_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk@11 {
+						reg = <11>;
+						#clock-cells = <0>;
+					};
+
+					spi0_clk: spi0_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi1_clk: spi1_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					tc0_clk: tc0_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc1_clk: tc1_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					tc2_clk: tc2_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					ohci_clk: ohci_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					macb0_clk: macb0_clk@21 {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					isi_clk: isi_clk@22 {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					usart3_clk: usart3_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					uart0_clk: uart0_clk@24 {
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+
+					uart1_clk: uart1_clk@25 {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					tc3_clk: tc3_clk@26 {
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					tc4_clk: tc4_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					tc5_clk: tc5_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
+					      18 IRQ_TYPE_LEVEL_HIGH 0
+					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
+					      27 IRQ_TYPE_LEVEL_HIGH 0
+					      28 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioC_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+				reg = <0xfffff400 0x200		/* pioA */
+				       0xfffff600 0x200		/* pioB */
+				       0xfffff800 0x200		/* pioC */
+				      >;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc00c3b  /* pioA */
+				       0xffffffff 0x7fff3ccf  /* pioB */
+				       0xffffffff 0x007fffff  /* pioC */
+				      >;
+				u-boot,dm-pre-reloc;
+
+				/* shared pinctrl settings */
+				dbgu {
+					u-boot,dm-pre-reloc;
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB15 periph with pullup */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A */
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB22 periph A */
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB6 periph A with pullup */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A */
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB28 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB29 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB8 periph A with pullup */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB9 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB10 periph A with pullup */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA31 periph B with pullup */
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB12 periph A with pullup */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB13 periph A */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC13 gpio RDY pin pull_up */
+							 AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PC14 gpio enable pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA19 periph A */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA20 periph A */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA23 periph B */
+							 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+
+					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA10 periph B */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA11 periph B */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA6 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA1 periph B with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA0 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA4 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA3 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB20 periph A */
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI1_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI1_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI1_SPCK pin */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffd0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd0000 0x200>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@fffd4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd4000 0x200>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@fffd8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd8000 0x200>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&udc_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffe0000 0x100>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&adc_clk>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xf>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <15>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger@0 {
+					reg = <0>;
+					trigger-name = "timer-counter-0";
+					trigger-value = <0x1>;
+				};
+				trigger@1 {
+					reg = <1>;
+					trigger-name = "timer-counter-1";
+					trigger-value = <0x3>;
+				};
+
+				trigger@2 {
+					reg = <2>;
+					trigger-name = "timer-counter-2";
+					trigger-value = <0x5>;
+				};
+
+				trigger@3 {
+					reg = <3>;
+					trigger-name = "external";
+					trigger-value = <0xd>;
+					trigger-external;
+				};
+			};
+
+			rtc: rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe800 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH
+				 &pioC 14 GPIO_ACTIVE_HIGH
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9260ek.dts b/roms/u-boot/arch/arm/dts/at91sam9260ek.dts
new file mode 100644
index 000000000..47606cbcd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9260ek.dts
@@ -0,0 +1,215 @@
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				mtd_dataflash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		btn4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9261.dtsi b/roms/u-boot/arch/arm/dts/at91sam9261.dtsi
new file mode 100644
index 000000000..b6357d3cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9261.dtsi
@@ -0,0 +1,890 @@
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9261 family SoC";
+	compatible = "atmel,at91sam9261";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+		spi0 = &spi0;
+	};
+
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x28000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&ohci_clk>, <&hclk0>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		fb0: fb@0x00600000 {
+			compatible = "atmel,at91sam9261-lcdc";
+			reg = <0x00600000 0x1000>;
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&hclk1>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <22>;
+			atmel,nand-cmd-offset = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>,
+				<&pioC 14 GPIO_ACTIVE_HIGH>,
+				<0>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9261-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&udc_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9261-i2c";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c_twi>;
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000{
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&ssc2_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				cs-gpios = <0>, <0>, <0>, <0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ramc: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioC_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+				reg = <0xfffff400 0x200		/* pioA */
+				       0xfffff600 0x200		/* pioB */
+				       0xfffff800 0x200		/* pioC */
+				      >;
+				atmel,mux-mask =
+				      /*    A         B     */
+				      <0xffffffff 0xfffffff7>,  /* pioA */
+				      <0xffffffff 0xfffffff4>,  /* pioB */
+				      <0xffffffff 0xffffff07>;  /* pioC */
+				u-boot,dm-pre-reloc;
+
+				/* shared pinctrl settings */
+				dbgu {
+					u-boot,dm-pre-reloc;
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+					};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c_bitbang: i2c-0-bitbang {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_i2c_twi: i2c-0-twi {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					clocks = <&main_osc>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+								<190000000 240000000 2 1>;
+				};
+
+				pllb: pllbck@1 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <1000000 5000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+					atmel,clk-output-range = <0 94000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91rm9200-clk-usb";
+					#clock-cells = <0>;
+					atmel,clk-divisors = <1 2 4 0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+					prog0: progi@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+
+					prog3: prog@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						interrupts = <AT91_PMC_PCKRDY(3)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+
+					pck3: pck@11 {
+						#clock-cells = <0>;
+						reg = <11>;
+						clocks = <&prog3>;
+					};
+
+					hclk0: hclk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+						clocks = <&mck>;
+					};
+
+					hclk1: hclk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+						clocks = <&mck>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+					pioA_clk: pioA_clk@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioB_clk: pioB_clk@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioC_clk: pioC_clk@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						u-boot,dm-pre-reloc;
+					};
+
+					usart0_clk: usart0_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					mci0_clk: mci0_clk@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					udc_clk: udc_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk@11 {
+						reg = <11>;
+						#clock-cells = <0>;
+					};
+
+					spi0_clk: spi0_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi1_clk: spi1_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					ssc1_clk: ssc1_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					ssc2_clk: ssc2_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tc0_clk: tc0_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc1_clk: tc1_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					tc2_clk: tc2_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					ohci_clk: ohci_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					lcd_clk: lcd_clk@21 {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_bitbang>;
+		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9261ek.dts b/roms/u-boot/arch/arm/dts/at91sam9261ek.dts
new file mode 100644
index 000000000..92fbdadb6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9261ek.dts
@@ -0,0 +1,211 @@
+/*
+ * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+/dts-v1/;
+#include "at91sam9261.dtsi"
+
+/ {
+	model = "Atmel at91sam9261ek";
+	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
+
+		fb0: fb@0x00600000 {
+			display = <&display0>;
+			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "BRG";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
+				status = "okay";
+
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+
+				tsc2046@2 {
+					reg = <2>;
+					compatible = "ti,ads7843";
+					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
+					spi-max-frequency = <3000000>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+					ti,x-min = /bits/ 16 <150>;
+					ti,x-max = /bits/ 16 <3830>;
+					ti,y-min = /bits/ 16 <190>;
+					ti,y-max = /bits/ 16 <3830>;
+					ti,vref-delay-usecs = /bits/ 16 <450>;
+					ti,x-plate-ohms = /bits/ 16 <450>;
+					ti,y-plate-ohms = /bits/ 16 <250>;
+					ti,pressure-max = /bits/ 16 <15000>;
+					ti,debounce-rep = /bits/ 16 <0>;
+					ti,debounce-tol = /bits/ 16 <65535>;
+					ti,debounce-max = /bits/ 16 <1>;
+
+					wakeup-source;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds8 {
+			label = "ds8";
+			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		ds7 {
+			label = "ds7";
+			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button_0 {
+			label = "button_0";
+			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			wakeup-source;
+		};
+
+		button_1 {
+			label = "button_1";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <257>;
+			wakeup-source;
+		};
+
+		button_2 {
+			label = "button_2";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			linux,code = <258>;
+			wakeup-source;
+		};
+
+		button_3 {
+			label = "button_3";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <259>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9263.dtsi b/roms/u-boot/arch/arm/dts/at91sam9263.dtsi
new file mode 100644
index 000000000..61b056266
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9263.dtsi
@@ -0,0 +1,1052 @@
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9263 family SoC";
+	compatible = "atmel,at91sam9263";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+		spi0 = &spi0;
+	};
+
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram0: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x14000>;
+	};
+
+	sram1: sram@00500000 {
+		compatible = "mmio-sram";
+		reg = <0x00500000 0x4000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <30 31>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					clocks = <&main_osc>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+								<190000000 240000000 2 1>;
+				};
+
+				pllb: pllbck@1 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+								<190000000 240000000 2 1>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+					atmel,clk-output-range = <0 120000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91rm9200-clk-usb";
+					#clock-cells = <0>;
+					atmel,clk-divisors = <1 2 4 0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+
+					prog3: prog@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						interrupts = <AT91_PMC_PCKRDY(3)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+
+					pck3: pck3@11 {
+						#clock-cells = <0>;
+						reg = <11>;
+						clocks = <&prog3>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+					pioA_clk: pioA_clk@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioB_clk: pioB_clk@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioCDE_clk: pioCDE_clk@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						u-boot,dm-pre-reloc;
+					};
+
+					usart0_clk: usart0_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart1_clk: usart1_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					usart2_clk: usart2_clk@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					mci0_clk: mci0_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					mci1_clk: mci1_clk@11 {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					can_clk: can_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					twi0_clk: twi0_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi0_clk: spi0_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					spi1_clk: spi1_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					ssc0_clk: ssc0_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					ssc1_clk: ssc1_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					ac97_clk: ac97_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					tcb_clk: tcb_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					pwm_clk: pwm_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					macb0_clk: macb0_clk@21 {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					g2de_clk: g2de_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					udc_clk: udc_clk@24 {
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+
+					isi_clk: isi_clk@25 {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					lcd_clk: lcd_clk@26 {
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					dma_clk: dma_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					ohci_clk: ohci_clk@29 {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+				};
+			};
+
+			ramc0: ramc@ffffe200 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe200 0x200>;
+			};
+
+			ramc1: ramc@ffffe800 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe800 0x200>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfff7c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				reg = <0xfffff200 0x200
+				       0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200
+				       0xfffffa00 0x200
+				      >;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xfffffffb 0xffffe07f  /* pioA */
+				       0x0007ffff 0x39072fff  /* pioB */
+				       0xffffffff 0x3ffffff8  /* pioC */
+				       0xfffffbff 0xffffffff  /* pioD */
+				       0xffe00fff 0xfbfcff00  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA26 periph A with pullup */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA28 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA29 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A with pullup */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD1 periph A */
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD7 periph B */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD8 periph B */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A with pullup */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD3 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD5 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD6 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PA22 gpio RDY pin pull_up*/
+							 AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD15 gpio enable pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC22 periph B */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC23 periph B */
+							 AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC24 periph B */
+							 AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE22 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA12 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA0 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA17 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk: mmc1_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
+					};
+
+					pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA8 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA21 periph A with pullup */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA22 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA23 periph A with pullup */
+							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA25 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB0 periph B */
+							 AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB1 periph B */
+							 AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA0 periph B SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA1 periph B SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA2 periph B SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A SPI1_MISO pin */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A SPI1_MOSI pin */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB9 periph B */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 periph A */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 periph A */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC12 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC18 periph A */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC24 periph A */
+							 AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC17 periph B */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC26 periph A */
+							 AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC27 periph A */
+					};
+				};
+
+				can {
+					pinctrl_can_rx_tx: can_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* CANRX, conflicts with IRQ0 */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* CANTX, conflicts with PCK0 */
+					};
+				};
+
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
+					};
+				};
+
+			};
+
+			pioA: gpio@fffff200 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff200 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioB: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioC: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCDE_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioD: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCDE_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioE: gpio@fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCDE_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff98000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff98000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fff9c000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ac97: sound@fffa0000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&ac97_clk>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fff78000 {
+				compatible = "atmel,at91sam9263-udc";
+				reg = <0xfff78000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&udc_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fff88000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fff84000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff84000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			can: can@fffac000 {
+				compatible = "atmel,at91sam9263-can";
+				reg = <0xfffac000 0x300>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can_rx_tx>;
+				clocks = <&can_clk>;
+				clock-names = "can_clk";
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			rtc@fffffd50 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd50 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x50>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@0x00700000 {
+			compatible = "atmel,at91sam9263-lcdc";
+			reg = <0x00700000 0x1000>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe000 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioA 22 GPIO_ACTIVE_HIGH
+				 &pioD 15 GPIO_ACTIVE_HIGH
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00a00000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00a00000 0x100000>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9263ek.dts b/roms/u-boot/arch/arm/dts/at91sam9263ek.dts
new file mode 100644
index 000000000..35799b8a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9263ek.dts
@@ -0,0 +1,229 @@
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Atmel at91sam9263ek";
+	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+		u-boot,dm-pre-reloc;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16367660>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart0: serial@fff8c000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
+							 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000 {
+				status = "okay";
+				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@0x00700000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00a00000 {
+			num-ports = <2>;
+			status = "okay";
+			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
+					   &pioA 21 GPIO_ACTIVE_HIGH
+					  >;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d3 {
+			label = "d3";
+			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d2 {
+			label = "d2";
+			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g15.dtsi b/roms/u-boot/arch/arm/dts/at91sam9g15.dtsi
new file mode 100644
index 000000000..27de7dc0f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g15.dtsi
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15 SoC";
+	compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+				       0x00040000 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g15ek.dts b/roms/u-boot/arch/arm/dts/at91sam9g15ek.dts
new file mode 100644
index 000000000..9fae92554
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g15ek.dts
@@ -0,0 +1,26 @@
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15-EK";
+	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			hlcdc: hlcdc@f8038000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g20-taurus.dts b/roms/u-boot/arch/arm/dts/at91sam9g20-taurus.dts
new file mode 100644
index 000000000..ca982737a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g20-taurus.dts
@@ -0,0 +1,120 @@
+/*
+ * at91sam9g20-taurus.dts
+ * (C) Copyright 2016
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Siemens taurus";
+	compatible = "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&gpbr {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&nand0 {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "soft";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins =
+			/* PC1 periph B */
+			<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+	};
+};
+
+&rtc {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+	status = "okay";
+};
+
+&spi0 {
+	cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+	mtd_dataflash@1 {
+		compatible = "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_ssc0_tx>;
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	u-boot,dm-pre-reloc;
+	timeout-sec = <15>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g20.dtsi b/roms/u-boot/arch/arm/dts/at91sam9g20.dtsi
new file mode 100644
index 000000000..e88d73ca8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g20.dtsi
@@ -0,0 +1,68 @@
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G20 family SoC";
+	compatible = "atmel,at91sam9g20";
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	sram0: sram@002ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@002fc000 {
+		compatible = "mmio-sram";
+		reg = <0x002fc000 0x8000>;
+	};
+
+	ahb {
+		apb {
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9g20-i2c";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91sam9rl-ssc";
+			};
+
+			adc0: adc@fffe0000 {
+				atmel,adc-startup-time = <40>;
+			};
+
+			pmc: pmc@fffffc00 {
+				plla: pllack@0 {
+					atmel,clk-input-range = <2000000 32000000>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
+								<695000000 750000000 1 0>,
+								<645000000 700000000 2 0>,
+								<595000000 650000000 3 0>,
+								<545000000 600000000 0 1>,
+								<495000000 550000000 1 1>,
+								<445000000 500000000 2 1>,
+								<400000000 450000000 3 1>;
+				};
+
+				pllb: pllbck@1 {
+					compatible = "atmel,at91sam9g20-clk-pllb";
+					atmel,clk-input-range = <2000000 32000000>;
+					atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
+				};
+
+				mck: masterck {
+					atmel,clk-output-range = <0 133000000>;
+					atmel,clk-divisors = <1 2 4 6>;
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g20ek.dts b/roms/u-boot/arch/arm/dts/at91sam9g20ek.dts
new file mode 100644
index 000000000..bbfd75311
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g20ek.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek";
+	compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g20ek_2mmc.dts b/roms/u-boot/arch/arm/dts/at91sam9g20ek_2mmc.dts
new file mode 100644
index 000000000..7ea83b6de
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,56 @@
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek 2 mmc";
+	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb{
+			mmc0: mmc@fffa8000 {
+				/* clk already mux wuth slot0 */
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0_slot0 {
+					pinctrl_board_mmc0_slot0: mmc0_slot0-board {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC2 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g20ek_common.dtsi b/roms/u-boot/arch/arm/dts/at91sam9g20ek_common.dtsi
new file mode 100644
index 000000000..719545476
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g20ek_common.dtsi
@@ -0,0 +1,227 @@
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+#include "at91sam9g20.dtsi"
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
+					};
+
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				mtd_dataflash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <1>;
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+		};
+
+		wm8731: wm8731@1b {
+			compatible = "wm8731";
+			reg = <0x1b>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		btn4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "atmel,at91sam9g20ek-wm8731-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+		atmel,model = "wm8731 @ AT91SAMG20EK";
+
+		atmel,audio-routing =
+			"Ext Spk", "LHPOUT",
+			"Int Mic", "MICIN";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g25-gardena-smart-gateway-u-boot.dtsi b/roms/u-boot/arch/arm/dts/at91sam9g25-gardena-smart-gateway-u-boot.dtsi
new file mode 100644
index 000000000..732dee6c0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g25-gardena-smart-gateway-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&dbgu {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g25-gardena-smart-gateway.dts b/roms/u-boot/arch/arm/dts/at91sam9g25-gardena-smart-gateway.dts
new file mode 100644
index 000000000..e2f8d8047
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the GARDENA smart Gateway (AT91SAM)
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+/dts-v1/;
+
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "GARDENA smart Gateway (AT91SAM)";
+	compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9";
+
+	aliases {
+		serial0 = &dbgu;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_blue {
+			label = "smartgw:power:blue";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_green {
+			label = "smartgw:power:green";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		power_red {
+			label = "smartgw:power:red";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_blue {
+			label = "smartgw:radio:blue";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_green {
+			label = "smartgw:radio:green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_red {
+			label = "smartgw:radio:red";
+			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_blue {
+			label = "smartgw:internet:blue";
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_green {
+			label = "smartgw:internet:green";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_red {
+			label = "smartgw:internet:red";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&nand0 {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	atmel,has-pmecc;	/* Enable PMECC */
+	atmel,pmecc-cap = <2>;
+	atmel,pmecc-sector-size = <512>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+	timeout-sec = <16>;
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g25.dtsi b/roms/u-boot/arch/arm/dts/at91sam9g25.dtsi
new file mode 100644
index 000000000..a7da0dd0c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g25.dtsi
@@ -0,0 +1,31 @@
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_isi.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25 SoC";
+	compatible = "atmel,at91sam9g25", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
+				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g25ek.dts b/roms/u-boot/arch/arm/dts/at91sam9g25ek.dts
new file mode 100644
index 000000000..31fecc2cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g25ek.dts
@@ -0,0 +1,69 @@
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			spi0: spi@f0000000 {
+				status = "disabled";
+			};
+
+			mmc1: mmc@f000c000 {
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pck0>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck0>;
+					assigned-clock-rates = <25000000>;
+					status = "okay";
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			isi: isi@f8048000 {
+				status = "okay";
+				port {
+					isi_0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g35.dtsi b/roms/u-boot/arch/arm/dts/at91sam9g35.dtsi
new file mode 100644
index 000000000..ff4115886
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g35.dtsi
@@ -0,0 +1,30 @@
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35 SoC";
+	compatible = "atmel,at91sam9g35", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g35ek.dts b/roms/u-boot/arch/arm/dts/at91sam9g35ek.dts
new file mode 100644
index 000000000..0cc084ecc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g35ek.dts
@@ -0,0 +1,31 @@
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35-EK";
+	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g45-corvus.dts b/roms/u-boot/arch/arm/dts/at91sam9g45-corvus.dts
new file mode 100644
index 000000000..172d18518
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g45-corvus.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91sam9g45-corvus.dts Device Tree file fir Siemens corvus board
+ * (C) Copyright 2016 Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+
+/ {
+	model = "Siemens corvus";
+	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x70000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart1: serial@fff90000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			spi0: spi@fffa4000{
+				status = "okay";
+				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <13000000>;
+					reg = <0>;
+				};
+			};
+
+			usb2: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd60 {
+				status = "okay";
+			};
+
+			rtc@fffffdb0 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+
+		usb0: ohci@00700000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+					   &pioD 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1: ehci@00800000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g45-gurnard.dts b/roms/u-boot/arch/arm/dts/at91sam9g45-gurnard.dts
new file mode 100644
index 000000000..2bc55f01a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g45-gurnard.dts
@@ -0,0 +1,157 @@
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+
+/ {
+	model = "Bluewater Systems Gurnard";
+	compatible = "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		u-boot,dm-pre-reloc;
+
+		fb@0x00500000 {
+			u-boot,dm-pre-reloc;
+			status = "okay";
+			display-timings {
+				rev1 {
+					clock-frequency = <4166666>;
+					hactive = <480>;
+					vactive = <272>;
+					hfront-porch = <1>;
+					hback-porch = <1>;
+					hsync-len = <1>;
+					vback-porch = <4>;
+					vfront-porch = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+
+				rev2 {
+					clock-frequency = <4166666>;
+					hactive = <480>;
+					vactive = <272>;
+					hfront-porch = <2>;
+					hback-porch = <2>;
+					hsync-len = <10>;
+					vback-porch = <2>;
+					vfront-porch = <2>;
+					vsync-len = <10>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
+
+		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
+					};
+
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ssc0: ssc@fff9c000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			spi0: spi@fffa4000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				mtd_dataflash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd60 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hardware";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+
+		usb1: ehci@00800000 {
+			atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9g45.dtsi b/roms/u-boot/arch/arm/dts/at91sam9g45.dtsi
new file mode 100644
index 000000000..c9b2e4698
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9g45.dtsi
@@ -0,0 +1,1334 @@
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ *                    applies to AT91SAM9G45, AT91SAM9M10,
+ *                    AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9G45 family SoC";
+	compatible = "atmel,at91sam9g45";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x70000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000>;
+		};
+	};
+
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			ramc0: ramc@ffffe400 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe400 0x200>;
+				clocks = <&ddrck>;
+				clock-names = "ddrck";
+			};
+
+			ramc1: ramc@ffffe600 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe600 0x200>;
+				clocks = <&ddrck>;
+				clock-names = "ddrck";
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					clocks = <&main_osc>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+								       695000000 750000000 1 0
+								       645000000 700000000 2 0
+								       595000000 650000000 3 0
+								       545000000 600000000 0 1
+								       495000000 555000000 1 1
+								       445000000 500000000 2 1
+								       400000000 450000000 3 1>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <0 133333333>;
+					atmel,clk-divisors = <1 2 4 3>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9g45-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioA_clk: pioA_clk@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioB_clk: pioB_clk@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					pioC_clk: pioC_clk@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					pioDE_clk: pioDE_clk@5 {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					trng_clk: trng_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart0_clk: usart0_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart1_clk: usart1_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					usart2_clk: usart2_clk@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					usart3_clk: usart3_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					mci0_clk: mci0_clk@11 {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					twi0_clk: twi0_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					twi1_clk: twi1_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi0_clk: spi0_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					spi1_clk: spi1_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					ssc0_clk: ssc0_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					ssc1_clk: ssc1_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tcb0_clk: tcb0_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					pwm_clk: pwm_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					adc_clk: adc_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma0_clk: dma0_clk@21 {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					uhphs_clk: uhphs_clk@22 {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					lcd_clk: lcd_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					ac97_clk: ac97_clk@24 {
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+
+					macb0_clk: macb0_clk@25 {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					isi_clk: isi_clk@26 {
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					udphs_clk: udphs_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					aestdessha_clk: aestdessha_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					mci1_clk: mci1_clk@29 {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+					vdec_clk: vdec_clk@30 {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9rl-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfff7c000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffd4000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffd4000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				reg = <0xfffff200 0x200
+				       0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200
+				       0xfffffa00 0x200
+				      >;
+				u-boot,dm-pre-reloc;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc003ff  /* pioA */
+				       0xffffffff 0x800f8f00  /* pioB */
+				       0xffffffff 0x00000e00  /* pioC */
+				       0xffffffff 0xff0c1381  /* pioD */
+				       0xffffffff 0x81ffff81  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					u-boot,dm-pre-reloc;
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A with pullup */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB17 periph B */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B */
+					};
+				};
+
+				uart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB4 periph A with pullup */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD17 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB6 periph A with pullup */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC9 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC11 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB9 periph A with pullup */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA24 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC8 gpio RDY pin pull_up*/
+							 AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PC14 gpio enable pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA19 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA6 periph B */
+							 AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA7 periph B */
+							 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA8 periph B */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA9 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA29 periph B */
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA2 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA9 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA31 periph A */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA22 periph A with pullup */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA25 periph A with pullup */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA26 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA27 periph A with pullup */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA29 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA30 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A */
+							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD4 periph A */
+							 AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD13 periph A */
+							 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A */
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD15 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI0_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI0_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A SPI1_MISO pin */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A SPI1_MOSI pin */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB16 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+				};
+			};
+
+			pioA: gpio@fffff200 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff200 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+			};
+
+			pioB: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+			};
+
+			pioC: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioC_clk>;
+			};
+
+			pioD: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioDE_clk>;
+			};
+
+			pioE: gpio@fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioDE_clk>;
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fff98000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff98000 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fffcc000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfffcc000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
+			};
+
+			i2c0: i2c@fff84000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff84000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fff88000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff9c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffa0000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffb0000 {
+				compatible = "atmel,at91sam9g45-adc";
+				reg = <0xfffb0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&adc_clk>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			isi@fffb4000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fffd0000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffd0000 0x600>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@fff78000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00600000 0x80000
+				       0xfff78000 0x400>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&udphs_clk>, <&utmi>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+
+				ep@0 {
+					reg = <0>;
+					atmel,fifo-size = <64>;
+					atmel,nb-banks = <1>;
+				};
+
+				ep@1 {
+					reg = <1>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@2 {
+					reg = <2>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@3 {
+					reg = <3>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep@4 {
+					reg = <4>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep@5 {
+					reg = <5>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@6 {
+					reg = <6>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+			};
+
+			sckc@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <1200000>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <75>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			rtc@fffffdb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffdb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@0x00500000 {
+			compatible = "atmel,at91sam9g45-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe200 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioC 8 GPIO_ACTIVE_HIGH
+				 &pioC 14 GPIO_ACTIVE_HIGH
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00700000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: ehci@00800000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00800000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9m10g45ek.dts b/roms/u-boot/arch/arm/dts/at91sam9m10g45ek.dts
new file mode 100644
index 000000000..52a76fefd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9m10g45ek.dts
@@ -0,0 +1,359 @@
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9M10G45-EK";
+	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+		u-boot,dm-pre-reloc;
+	};
+
+	memory {
+		reg = <0x70000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			usart1: serial@fff90000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			i2c0: i2c@fff84000 {
+				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			i2c1: i2c@fff88000 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			mmc1: mmc@fffd0000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc1
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD10 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				mmc1 {
+					pinctrl_board_mmc1: mmc1-board {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PD11 gpio CD pin pull up and deglitch */
+							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm_leds: pwm-led {
+						atmel,pins =
+							<AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PD0 periph B */
+							 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PD31 periph B */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000{
+				status = "okay";
+				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <13000000>;
+					reg = <0>;
+				};
+			};
+
+			usb2: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			adc0: adc@fffb0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			isi@fffb4000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm_leds>;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd60 {
+				status = "okay";
+			};
+
+			rtc@fffffdb0 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@0x00500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <32>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <9>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hback-porch = <1>;
+						hfront-porch = <1>;
+						vback-porch = <40>;
+						vfront-porch = <1>;
+						hsync-len = <45>;
+						vsync-len = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			boot@0 {
+				label = "bootstrap/uboot/kernel";
+				reg = <0x0 0x400000>;
+			};
+
+			rootfs@400000 {
+				label = "rootfs";
+				reg = <0x400000 0x3C00000>;
+			};
+
+			data@4000000 {
+				label = "data";
+				reg = <0x4000000 0xC000000>;
+			};
+		};
+
+		usb0: ohci@00700000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+					   &pioD 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1: ehci@00800000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		d6 {
+			label = "d6";
+			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		d7 {
+			label = "d7";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		left {
+			label = "Joystick Left";
+			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
+			linux,code = <105>;
+		};
+
+		right {
+			label = "Joystick Right";
+			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
+			linux,code = <106>;
+		};
+
+		up {
+			label = "Joystick Up";
+			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
+			linux,code = <103>;
+		};
+
+		down {
+			label = "Joystick Down";
+			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
+			linux,code = <108>;
+		};
+
+		enter {
+			label = "Joystick Press";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9n12.dtsi b/roms/u-boot/arch/arm/dts/at91sam9n12.dtsi
new file mode 100644
index 000000000..024be13da
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9n12.dtsi
@@ -0,0 +1,1061 @@
+/*
+ * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9N12 SoC";
+	compatible = "atmel,at91sam9n12";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+		spi0 = &spi0;
+	};
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&ddrck>;
+				clock-names = "ddrck";
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9n12-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc>, <&main_osc>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
+								      <695000000 750000000 1 0>,
+								      <645000000 700000000 2 0>,
+								      <595000000 650000000 3 0>,
+								      <545000000 600000000 0 1>,
+								      <495000000 555000000 1 1>,
+								      <445000000 500000000 2 1>,
+								      <400000000 450000000 3 1>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				pllb: pllbck@1 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <3>;
+					atmel,pll-clk-output-ranges = <30000000 100000000 0>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
+					atmel,clk-output-range = <0 133333333>;
+					atmel,clk-divisors = <1 2 4 3>;
+					atmel,master-clk-have-div3-pres;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9n12-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+					pioAB_clk: pioAB_clk@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioCD_clk: pioCD_clk@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						u-boot,dm-pre-reloc;
+					};
+
+					fuse_clk: fuse_clk@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk@5 {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart1_clk: usart1_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart2_clk: usart2_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart3_clk: usart3_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					twi0_clk: twi0_clk@9 {
+						reg = <9>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					mci0_clk: mci0_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi1_clk: spi1_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					uart0_clk: uart0_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					uart1_clk: uart1_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tcb_clk: tcb_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pwm_clk: pwm_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					adc_clk: adc_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma0_clk: dma0_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					uhphs_clk: uhphs_clk@22 {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					udphs_clk: udphs_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					lcdc_clk: lcdc_clk@25 {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					sha_clk: sha_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					ssc0_clk: ssc0_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					aes_clk: aes_clk@29 {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+					trng_clk: trng_clk@30 {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+				};
+			};
+
+			rstc@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			shdwc@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_osc>;
+				};
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9n12-hlcdc";
+				reg = <0xf8038000 0x2000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk", "sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+				reg = <0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200
+				       0xfffffa00 0x200
+				      >;
+
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe07983 0x00000000  /* pioA */
+				       0x00040000 0x00047e0f 0x00000000  /* pioB */
+				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+				u-boot,dm-pre-reloc;
+
+				/* shared pinctrl settings */
+				dbgu {
+					u-boot,dm-pre-reloc;
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA0 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA7 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC23 periph B with pullup */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC22 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC9 periph C with pullup */
+							 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC8 periph C */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC17 periph C with pullup */
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC16 periph C */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD5 gpio RDY pin pull_up*/
+							 AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD4 gpio enable pin pull_up */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA13 periph B with pullup */
+							 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA14 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioAB_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioAB_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCD_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCD_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x4000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x4000>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				status = "disabled";
+			};
+
+			usb1: gadget@f803c000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xf803c000 0x4000>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&udphs_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = < 0x40000000 0x10000000
+				0xffffe000 0x00000600
+				0xffffe600 0x00000200
+				0x00108000 0x00018000
+			       >;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
+				 &pioD 4 GPIO_ACTIVE_HIGH
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x00100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9n12ek.dts b/roms/u-boot/arch/arm/dts/at91sam9n12ek.dts
new file mode 100644
index 000000000..64a7abf63
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9n12ek.dts
@@ -0,0 +1,265 @@
+/*
+ * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9n12.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9N12-EK";
+	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+		u-boot,dm-pre-reloc;
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck0>;
+					clock-names = "mclk";
+				};
+
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
+			};
+
+			mmc0: mmc@f0008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				qt1070 {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_sense: usb1_vbus_sense {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PB16 gpio usb vbus sense, no pull up and deglitch */
+					};
+				};
+			};
+
+			spi0: spi@f0000000 {
+				status = "okay";
+				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+				spi_flash@0 {
+					compatible = "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
+			usb1: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <2>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <1>;
+			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		d9 {
+			label = "d9";
+			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		enter {
+			label = "Enter";
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "qiaodian,qd43003c0-40", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "okay";
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9rl.dtsi b/roms/u-boot/arch/arm/dts/at91sam9rl.dtsi
new file mode 100644
index 000000000..6d6aee552
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9rl.dtsi
@@ -0,0 +1,1135 @@
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ *  Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9RL family SoC";
+	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+		spi0 = &spi0;
+	};
+
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		fb0: fb@00500000 {
+			compatible = "atmel,at91sam9rl-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>,
+			      <0xffffe800 0x200>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
+				<&pioB 6 GPIO_ACTIVE_HIGH>,
+				<0>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			mmc0: mmc@fffa4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa4000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffa8000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffa8000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffbc000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffbc000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffc0000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc4000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffc8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffc8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffd0000 {
+				compatible = "atmel,at91sam9rl-adc";
+				reg = <0xfffd0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&adc_clk>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0x3f>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger0 {
+					trigger-name = "timer-counter-0";
+					trigger-value = <0x1>;
+				};
+				trigger1 {
+					trigger-name = "timer-counter-1";
+					trigger-value = <0x3>;
+				};
+
+				trigger2 {
+					trigger-name = "timer-counter-2";
+					trigger-value = <0x5>;
+				};
+
+				trigger3 {
+					trigger-name = "external";
+					trigger-value = <0x13>;
+					trigger-external;
+				};
+			};
+
+			usb0: gadget@fffd4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x100000>,
+				      <0xfffd4000 0x4000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&udphs_clk>, <&utmi>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+
+				ep@0 {
+					reg = <0>;
+					atmel,fifo-size = <64>;
+					atmel,nb-banks = <1>;
+				};
+
+				ep@1 {
+					reg = <1>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@2 {
+					reg = <2>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@3 {
+					reg = <3>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep@4 {
+					reg = <4>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep@5 {
+					reg = <5>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@6 {
+					reg = <6>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9rl-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+				reg = <0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200
+				       0xfffffa00 0x200
+				      >;
+
+				atmel,mux-mask =
+					/*    A         B     */
+					<0xffffffff 0xe05c6738>,  /* pioA */
+					<0xffffffff 0x0000c780>,  /* pioB */
+					<0xffffffff 0xe3ffff0e>,  /* pioC */
+					<0x003fffff 0x0001ff3c>;  /* pioD */
+				u-boot,dm-pre-reloc;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_ts: adc0_ts-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad0: adc0_ad0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad1: adc0_ad1-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad2: adc0_ad2-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad3: adc0_ad3-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad4: adc0_ad4-0 {
+						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad5: adc0_ad5-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_adtrg: adc0_adtrg-0 {
+						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					u-boot,dm-pre-reloc;
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand0_ale_cle: nand_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand0_oe_we: nand_oe_we-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand0_cs: nand_cs-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioC_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioD_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <3>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0>,
+								<190000000 240000000 2>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
+					atmel,clk-output-range = <0 94000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+					u-boot,dm-pre-reloc;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+					pioA_clk: pioA_clk@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioB_clk: pioB_clk@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioC_clk: pioC_clk@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						u-boot,dm-pre-reloc;
+					};
+
+					pioD_clk: pioD_clk@5 {
+						#clock-cells = <0>;
+						reg = <5>;
+						u-boot,dm-pre-reloc;
+					};
+
+					usart0_clk: usart0_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					usart3_clk: usart3_clk@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					mci0_clk: mci0_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk@11 {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					twi1_clk: twi1_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					ssc1_clk: ssc1_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					tc0_clk: tc0_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tc1_clk: tc1_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc2_clk: tc2_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					pwm_clk: pwm_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					adc_clk: adc_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma0_clk: dma0_clk@21 {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					udphs_clk: udphs_clk@22 {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					lcd_clk: lcd_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			sckc@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <1200000>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <75>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+
+			rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9rlek.dts b/roms/u-boot/arch/arm/dts/at91sam9rlek.dts
new file mode 100644
index 000000000..ae4269744
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9rlek.dts
@@ -0,0 +1,239 @@
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ *  Copyright (C) 2014  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+	model = "Atmel at91sam9rlek";
+	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+		stdout-path = "serial0:115200n8";
+		u-boot,dm-pre-reloc;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		fb0: fb@00500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		apb {
+			mmc0: mmc@fffa4000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			adc0: adc@fffd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_adtrg>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			usb0: gadget@fffd4000 {
+				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffcc000 {
+				status = "okay";
+				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			pwm0: pwm@fffc8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+					<&pinctrl_pwm0_pwm2_2>;
+			};
+
+			dbgu: serial@fffff200 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			rtc@fffffe00 {
+				status = "okay";
+			};
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		ds1 {
+			label = "ds1";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+
+		ds2 {
+			label = "ds2";
+			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds3 {
+			label = "ds3";
+			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	i2c-gpio-1 {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x25.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x25.dtsi
new file mode 100644
index 000000000..3c5fa3388
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x25.dtsi
@@ -0,0 +1,32 @@
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25 SoC";
+	compatible = "atmel,at91sam9x25", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x25ek.dts b/roms/u-boot/arch/arm/dts/at91sam9x25ek.dts
new file mode 100644
index 000000000..494864836
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x25ek.dts
@@ -0,0 +1,30 @@
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9x25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25-EK";
+	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			macb1: ethernet@f8030000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x35.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x35.dtsi
new file mode 100644
index 000000000..d9054e816
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x35.dtsi
@@ -0,0 +1,31 @@
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35 SoC";
+	compatible = "atmel,at91sam9x35", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x35ek.dts b/roms/u-boot/arch/arm/dts/at91sam9x35ek.dts
new file mode 100644
index 000000000..3ca70c0b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x35ek.dts
@@ -0,0 +1,30 @@
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35-EK";
+	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+			hlcdc: hlcdc@f8038000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5.dtsi
new file mode 100644
index 000000000..bd4abe00d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5.dtsi
@@ -0,0 +1,1297 @@
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ *                   AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9x5 family SoC";
+	compatible = "atmel,at91sam9x5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+		spi0 = &spi0;
+	};
+
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&ddrck>;
+				clock-names = "ddrck";
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9x5-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc>, <&main_osc>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+								       695000000 750000000 1 0
+								       645000000 700000000 2 0
+								       595000000 650000000 3 0
+								       545000000 600000000 0 1
+								       495000000 555000000 1 1
+								       445000000 500000000 2 1
+								       400000000 450000000 3 1>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <0 133333333>;
+					atmel,clk-divisors = <1 2 4 3>;
+					atmel,master-clk-have-div3-pres;
+					u-boot,dm-pre-reloc;
+
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+
+					pioAB_clk: pioAB_clk@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioCD_clk: pioCD_clk@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					smd_clk: smd_clk@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk@5 {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart1_clk: usart1_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart2_clk: usart2_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					twi0_clk: twi0_clk@9 {
+						reg = <9>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi2_clk: twi2_clk@11 {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					mci0_clk: mci0_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi1_clk: spi1_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					uart0_clk: uart0_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					uart1_clk: uart1_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tcb0_clk: tcb0_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pwm_clk: pwm_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					adc_clk: adc_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma0_clk: dma0_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma1_clk: dma1_clk@21 {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					uhphs_clk: uhphs_clk@22 {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					udphs_clk: udphs_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					mci1_clk: mci1_clk@26 {
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					ssc0_clk: ssc0_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+				};
+			};
+
+			rstc@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shdwc@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_osc>;
+				};
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			dma0: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffee00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffee00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+				reg = <0xfffff400 0x200		/* pioA */
+				       0xfffff600 0x200		/* pioB */
+				       0xfffff800 0x200		/* pioC */
+				       0xfffffa00 0x200		/* pioD */
+				       >;
+				u-boot,dm-pre-reloc;
+
+
+				/* shared pinctrl settings */
+				dbgu {
+					u-boot,dm-pre-reloc;
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA0 periph A with pullup */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA1 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA5 periph A with pullup */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
+							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A Read Enable */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A Write Enable */
+							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD2 periph A Address Latch Enable */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A Command Latch Enable */
+							 AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD4 gpio Chip Enable pin pull_up */
+							 AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD5 gpio RDY/BUSY pin pull_up */
+							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD6 periph A Data bit 0 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD7 periph A Data bit 1 */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD8 periph A Data bit 2 */
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A Data bit 3 */
+							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A Data bit 4 */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A Data bit 5 */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD12 periph A Data bit 6 */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD13 periph A Data bit 7 */
+					};
+
+					pinctrl_nand_16bits: nand_16bits-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A Data bit 8 */
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A Data bit 9 */
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD16 periph A Data bit 10 */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD17 periph A Data bit 11 */
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD18 periph A Data bit 12 */
+							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD19 periph A Data bit 13 */
+							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD20 periph A Data bit 14 */
+							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A Data bit 15 */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
+					};
+				};
+
+				i2c_gpio2 {
+					pinctrl_i2c_gpio2: i2c_gpio2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins =
+							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins =
+							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioAB_clk>;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <19>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioAB_clk>;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCD_clk>;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <22>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCD_clk>;
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@f000c000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf000c000 0x600>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8018000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				clocks = <&twi2_clk>;
+				status = "disabled";
+			};
+
+			uart0: serial@f8040000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8040000 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8044000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8044000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			adc0: adc@f804c000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xffff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+
+				trigger1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@f803c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00500000 0x80000
+				       0xf803c000 0x400>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&utmi>, <&udphs_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+
+				ep@0 {
+					reg = <0>;
+					atmel,fifo-size = <64>;
+					atmel,nb-banks = <1>;
+				};
+
+				ep@1 {
+					reg = <1>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@2 {
+					reg = <2>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@3 {
+					reg = <3>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep@4 {
+					reg = <4>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep@5 {
+					reg = <5>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep@6 {
+					reg = <6>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91sam9x5-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pwm_clk>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe000 0x600		/* PMECC Registers */
+			       0xffffe600 0x200		/* PMECC Error Location Registers */
+			       0x00108000 0x18000	/* PMECC looup table in ROM code  */
+			      >;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
+				 &pioD 4 GPIO_ACTIVE_HIGH
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: ehci@00700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
+			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio2>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5_can.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5_can.dtsi
new file mode 100644
index 000000000..9727b771d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5_can.dtsi
@@ -0,0 +1,71 @@
+/*
+ * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					can0_clk: can0_clk@29 {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+					can1_clk: can1_clk@30 {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+				};
+			};
+
+			can0: can@f8000000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&can0_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&can1_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0, conflicts with DRXD */
+							AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX0, conflicts with DTXD */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1, conflicts with RXD1 */
+							AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX1, conflicts with TXD1 */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5_isi.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5_isi.dtsi
new file mode 100644
index 000000000..2c5075f8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5_isi.dtsi
@@ -0,0 +1,72 @@
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D0, conflicts with LCDDAT0 */
+							AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D1, conflicts with LCDDAT1 */
+							AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D2, conflicts with LCDDAT2 */
+							AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D3, conflicts with LCDDAT3 */
+							AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D4, conflicts with LCDDAT4 */
+							AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D5, conflicts with LCDDAT5 */
+							AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D6, conflicts with LCDDAT6 */
+							AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D7, conflicts with LCDDAT7 */
+							AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_PCK, conflicts with LCDDAT12 */
+							AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_HSYNC, conflicts with LCDDAT14 */
+							AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_VSYNC, conflicts with LCDDAT13 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D8, conflicts with LCDDAT8 */
+							AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with LCDDAT9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D10, conflicts with LCDDAT10 */
+							AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with LCDDAT11 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					isi_clk: isi_clk@25 {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5_lcd.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5_lcd.dtsi
new file mode 100644
index 000000000..96b7095a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5_lcd.dtsi
@@ -0,0 +1,146 @@
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk@25 {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+
+				systemck {
+					lcdck: lcdck@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5_macb0.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5_macb0.dtsi
new file mode 100644
index 000000000..1540e6023
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5_macb0.dtsi
@@ -0,0 +1,67 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+					};
+
+					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb0_clk: macb0_clk@24 {
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5_macb1.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5_macb1.dtsi
new file mode 100644
index 000000000..be2eab4b9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5_macb1.dtsi
@@ -0,0 +1,55 @@
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
+							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
+							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
+							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
+							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb1_clk: macb1_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+				};
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5_usart3.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5_usart3.dtsi
new file mode 100644
index 000000000..525921907
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5_usart3.dtsi
@@ -0,0 +1,69 @@
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		serial4 = &usart3;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC23 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC26 periph B */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					usart3_clk: usart3_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+				};
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi
new file mode 100644
index 000000000..b098ad8cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi
@@ -0,0 +1,100 @@
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				1wire_cm {
+					pinctrl_1wire_cm: 1wire_cm-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
+					};
+				};
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;	/* Enable PMECC */
+			atmel,pmecc-cap = <2>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			uboot@40000 {
+				label = "u-boot";
+				reg = <0x40000 0x80000>;
+			};
+
+			ubootenv@c0000 {
+				label = "U-Boot Env";
+				reg = <0xc0000 0x140000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x1f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pb18 {
+			label = "pb18";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pd21 {
+			label = "pd21";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	1wire_cm {
+		compatible = "w1-gpio";
+		gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
+		linux,open-drain;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_1wire_cm>;
+		status = "okay";
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5dm.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5dm.dtsi
new file mode 100644
index 000000000..a620366de
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5dm.dtsi
@@ -0,0 +1,66 @@
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c0: i2c@f8010000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <7 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				atmel,vl-bpix = <4>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					800x480 {
+						clock-frequency = <24000000>;
+						hactive = <800>;
+						vactive = <480>;
+						hsync-len = <128>;
+						hfront-porch = <64>;
+						hback-porch = <64>;
+						vfront-porch = <22>;
+						vback-porch = <21>;
+						vsync-len = <2>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5ek.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5ek.dtsi
new file mode 100644
index 000000000..1f7f37b68
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5ek.dtsi
@@ -0,0 +1,167 @@
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X5-EK";
+	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+		u-boot,dm-pre-reloc;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			mmc1: mmc@f000c000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc1
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			usb2: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_board_usb2>;
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+
+				wm8731: wm8731@1a {
+					compatible = "wm8731";
+					reg = <0x1a>;
+				};
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				camera_sensor {
+					pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				mmc1 {
+					pinctrl_board_mmc1: mmc1-board {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				usb2 {
+					pinctrl_board_usb2: usb2-board {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+					};
+				};
+			};
+
+			spi0: spi@f0000000 {
+				status = "okay";
+				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+				spi_flash@0 {
+					compatible = "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00600000 {
+			status = "okay";
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+					   &pioD 19 GPIO_ACTIVE_LOW
+					   &pioD 20 GPIO_ACTIVE_LOW
+					  >;
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,sam9x5-wm8731-audio";
+
+		atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+		atmel,audio-routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line In Jack",
+			"RLINEIN", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/at91sam9xe.dtsi b/roms/u-boot/arch/arm/dts/at91sam9xe.dtsi
new file mode 100644
index 000000000..0278f63b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9xe.dtsi
@@ -0,0 +1,60 @@
+/*
+ * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9XE family SoC";
+	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
+
+	sram0: sram@002ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/avnet-ultra96-rev1.dts b/roms/u-boot/arch/arm/dts/avnet-ultra96-rev1.dts
new file mode 100644
index 000000000..ddb8febae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/avnet-ultra96-rev1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Avnet Ultra96 rev1
+ *
+ * (C) Copyright 2018 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp-zcu100-revC.dts"
+
+/ {
+	model = "Avnet Ultra96 Rev1";
+	compatible = "avnet,ultra96-rev1", "avnet,ultra96",
+		     "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100",
+		     "xlnx,zynqmp";
+};
diff --git a/roms/u-boot/arch/arm/dts/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts b/roms/u-boot/arch/arm/dts/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts
new file mode 100644
index 000000000..85ab9e9e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+
+/*
+ * UltraZed-EV Carrier Card v1 (based on the UltraZed-EV SoM)
+ * http://ultrazed.org/product/ultrazed-ev-carrier-card
+ */
+
+/dts-v1/;
+
+#include "avnet-ultrazedev-som-v1.0.dtsi"
+
+/ {
+	model = "Avnet UltraZed EV Carrier Card v1.0";
+	compatible = "avnet,ultrazedev-cc-v1.0-ultrazedev-som-v1.0",
+		     "xlnx,zynqmp";
+	chosen {
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = &eeprom;
+	};
+	aliases {
+		ethernet0 = &gem3;
+		serial0 = &uart0;
+	};
+};
+
+&uart0 {
+	device_type = "serial";
+	status = "okay";
+};
+
+&i2c_cc {
+	/* Microchip 24AA025E48T-I/OT: 2K I2C Serial EEPROM with EUI-48 */
+	eeprom: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* IDT Versa Clock 5P49V5935B */
+	vc5: clock-generator@6a {
+		compatible = "idt,5p49v5935";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+	};
+};
+
+/* Ethernet RJ-45 */
+&gem3 {
+	status = "okay";
+};
+
+/* microSD card slot */
+&sdhci1 {
+	status = "okay";
+	xlnx,mio-bank = <1>;
+	clock-frequency = <199998000>;
+	max-frequency = <50000000>;
+	no-1-8-v;
+	disable-wp;
+};
diff --git a/roms/u-boot/arch/arm/dts/avnet-ultrazedev-som-v1.0.dtsi b/roms/u-boot/arch/arm/dts/avnet-ultrazedev-som-v1.0.dtsi
new file mode 100644
index 000000000..cbcb290a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/avnet-ultrazedev-som-v1.0.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+
+/*
+ * UltraZed-EV SoM v1
+ * http://ultrazed.org/product/ultrazed-ev
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "Avnet UltraZed EV SoM v1.0";
+	compatible = "avnet,ultrazedev-som-v1.0", "xlnx,zynqmp";
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, /* 2 GB @ offset 0 */
+		      <0x8 0x0 0x0 0x80000000>; /* 2 GB @ offset 32GB */
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	i2cswitch@70 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		/* I2C connected to Carrier Card via JX3A1/JX3C1 */
+		i2c_cc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* Marvell 88E1512-A0-NNP2I000 Ethernet PHY */
+&gem3 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&gem3phy>;
+	gem3phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+/* Micron MTFC8GAKAJCN-4M 8 GB eMMC */
+&sdhci0 {
+	status = "okay";
+	xlnx,mio-bank = <0>;
+	clock-frequency = <199998000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/axp152.dtsi b/roms/u-boot/arch/arm/dts/axp152.dtsi
new file mode 100644
index 000000000..f90ad6c64
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/axp152.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&axp152 {
+	compatible = "x-powers,axp152";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/axp209.dtsi b/roms/u-boot/arch/arm/dts/axp209.dtsi
new file mode 100644
index 000000000..0d9ff12bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/axp209.dtsi
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp202-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp209-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp209-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power-supply {
+		compatible = "x-powers,axp202-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/axp223.dtsi b/roms/u-boot/arch/arm/dts/axp223.dtsi
new file mode 100644
index 000000000..b91b6c127
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/axp223.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2016 Free Electrons
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf
+ *
+ * The AXP223 shares most of its logic with the AXP221 but it has some
+ * differences, for the VBUS driver for example.
+ */
+
+#include "axp22x.dtsi"
+
+&usb_power_supply {
+	compatible = "x-powers,axp223-usb-power-supply";
+};
diff --git a/roms/u-boot/arch/arm/dts/axp22x.dtsi b/roms/u-boot/arch/arm/dts/axp22x.dtsi
new file mode 100644
index 000000000..87fb08e81
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/axp22x.dtsi
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp22x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp221-ac-power-supply";
+		status = "disabled";
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp221-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dc5ldo: dc5ldo {
+			regulator-name = "dc5ldo";
+		};
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_ldo_io0: ldo_io0 {
+			regulator-name = "ldo_io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo_io1 {
+			regulator-name = "ldo_io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc_ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc_ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb_power_supply {
+		compatible = "x-powers,axp221-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/axp803.dtsi b/roms/u-boot/arch/arm/dts/axp803.dtsi
new file mode 100644
index 000000000..10e9186a7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/axp803.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+
+/*
+ * AXP803 Integrated Power Management Chip
+ * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
+ */
+
+&axp803 {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp803-ac-power-supply",
+			     "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp803-adc", "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio0_ldo: gpio0-ldo {
+			pins = "GPIO0";
+			function = "ldo";
+		};
+
+		gpio1_ldo: gpio1-ldo {
+			pins = "GPIO1";
+			function = "ldo";
+		};
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp803-battery-power-supply",
+			     "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dcdc6: dcdc6 {
+			regulator-name = "dcdc6";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_fldo1: fldo1 {
+			regulator-name = "fldo1";
+		};
+
+		reg_fldo2: fldo2 {
+			regulator-name = "fldo2";
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			regulator-name = "ldo-io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			regulator-name = "ldo-io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc-ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power-supply {
+		compatible = "x-powers,axp803-usb-power-supply",
+			     "x-powers,axp813-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/axp809.dtsi b/roms/u-boot/arch/arm/dts/axp809.dtsi
new file mode 100644
index 000000000..ab8e5f2d9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/axp809.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP809 Integrated Power Management Chip
+ */
+
+&axp809 {
+	compatible = "x-powers,axp809";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/axp81x.dtsi b/roms/u-boot/arch/arm/dts/axp81x.dtsi
new file mode 100644
index 000000000..043c717dc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/axp81x.dtsi
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* AXP813/818 Integrated Power Management Chip */
+
+&axp81x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	axp_adc: adc {
+		compatible = "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio0_ldo: gpio0-ldo {
+			pins = "GPIO0";
+			function = "ldo";
+		};
+
+		gpio1_ldo: gpio1-ldo {
+			pins = "GPIO1";
+			function = "ldo";
+		};
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+		};
+
+		reg_dcdc2: dcdc2 {
+		};
+
+		reg_dcdc3: dcdc3 {
+		};
+
+		reg_dcdc4: dcdc4 {
+		};
+
+		reg_dcdc5: dcdc5 {
+		};
+
+		reg_dcdc6: dcdc6 {
+		};
+
+		reg_dcdc7: dcdc7 {
+		};
+
+		reg_aldo1: aldo1 {
+		};
+
+		reg_aldo2: aldo2 {
+		};
+
+		reg_aldo3: aldo3 {
+		};
+
+		reg_dldo1: dldo1 {
+		};
+
+		reg_dldo2: dldo2 {
+		};
+
+		reg_dldo3: dldo3 {
+		};
+
+		reg_dldo4: dldo4 {
+		};
+
+		reg_eldo1: eldo1 {
+		};
+
+		reg_eldo2: eldo2 {
+		};
+
+		reg_eldo3: eldo3 {
+		};
+
+		reg_fldo1: fldo1 {
+		};
+
+		reg_fldo2: fldo2 {
+		};
+
+		reg_fldo3: fldo3 {
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_ldo>;
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_ldo>;
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		reg_sw: sw {
+		};
+
+		reg_drivevbus: drivevbus {
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-a-plus.dts b/roms/u-boot/arch/arm/dts/bcm2835-rpi-a-plus.dts
new file mode 100644
index 000000000..db8a6017f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-a-plus.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model A+";
+
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the unreleased schematic for the Model A+.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-a.dts b/roms/u-boot/arch/arm/dts/bcm2835-rpi-a.dts
new file mode 100644
index 000000000..067d1f07a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-a.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a", "brcm,bcm2835";
+	model = "Raspberry Pi Model A";
+
+	leds {
+		act {
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-b-plus.dts b/roms/u-boot/arch/arm/dts/bcm2835-rpi-b-plus.dts
new file mode 100644
index 000000000..1e40d672b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-b-plus.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model B+";
+
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
+	 * RPI-BPLUS sheet 1
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "LAN_RUN", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "ETHCLK", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-b-rev2.dts b/roms/u-boot/arch/arm/dts/bcm2835-rpi-b-rev2.dts
new file mode 100644
index 000000000..28e7513ce
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-b-rev2.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+	model = "Raspberry Pi Model B rev2";
+
+	leds {
+		act {
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
+	 * RPI00022 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_CLK",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "CAM_GPIO",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-b.dts b/roms/u-boot/arch/arm/dts/bcm2835-rpi-b.dts
new file mode 100644
index 000000000..31ff602e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-b.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	leds {
+		act {
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-cm1-io1.dts b/roms/u-boot/arch/arm/dts/bcm2835-rpi-cm1-io1.dts
new file mode 100644
index 000000000..4764a2558
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-cm1-io1.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835-rpi-cm1.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+	model = "Raspberry Pi Compute Module IO board rev1";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "HDMI_HPD_N",
+			  /* Also used as ACT LED */
+			  "EMMC_EN_N",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-cm1.dtsi b/roms/u-boot/arch/arm/dts/bcm2835-rpi-cm1.dtsi
new file mode 100644
index 000000000..ef22c2da7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-cm1.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&sdhost {
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-zero-w.dts b/roms/u-boot/arch/arm/dts/bcm2835-rpi-zero-w.dts
new file mode 100644
index 000000000..ba0167df6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+	model = "Raspberry Pi Zero W";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO1", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "CAM_GPIO0", /* GPIO44 */
+			  "BT_ON", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi-zero.dts b/roms/u-boot/arch/arm/dts/bcm2835-rpi-zero.dts
new file mode 100644
index 000000000..3b35a8a4a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi-zero.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "NC", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "NC", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835-rpi.dtsi b/roms/u-boot/arch/arm/dts/bcm2835-rpi.dtsi
new file mode 100644
index 000000000..715d50c64
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835-rpi.dtsi
@@ -0,0 +1,104 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+			mboxes = <&mailbox>;
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+
+		vchiq: mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0x3c>;
+			interrupts = <0 2>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio48>;
+	bus-width = <4>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&hdmi {
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+	status = "okay";
+};
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2835.dtsi b/roms/u-boot/arch/arm/dts/bcm2835.dtsi
new file mode 100644
index 000000000..a5c3824c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2835.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
+	};
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2836-rpi-2-b.dts b/roms/u-boot/arch/arm/dts/bcm2836-rpi-2-b.dts
new file mode 100644
index 000000000..7b4e651ba
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2836-rpi-2-b.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2836.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+	model = "Raspberry Pi 2 Model B";
+
+	memory@0 {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETHCLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2836-rpi.dtsi b/roms/u-boot/arch/arm/dts/bcm2836-rpi.dtsi
new file mode 100644
index 000000000..c4c858b98
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2836-rpi.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+&vchiq {
+	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2836.dtsi b/roms/u-boot/arch/arm/dts/bcm2836.dtsi
new file mode 100644
index 000000000..c933e8413
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2836.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp";
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-a-plus.dts b/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-a-plus.dts
new file mode 100644
index 000000000..7f4437a8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-a-plus.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model A+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		reg = <0 0x20000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "",
+				  "BT_WL_ON",
+				  "STATUS_LED_R",
+				  "",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * This is mostly based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "", /* GPIO42 */
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/*
+ * SDHCI is used to control the SDIO for wireless
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-b-plus.dts b/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000..c6fa34c24
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "STATUS_LED_R",
+				  "LAN_RUN",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETHCLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-b.dts b/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-b.dts
new file mode 100644
index 000000000..ce71f578c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2837-rpi-3-b.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "STATUS_LED",
+				  "LAN_RUN",
+				  "HDMI_HPD_N",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "PWR_LOW_N";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "", /* GPIO 28 */
+			  "LAN_RUN_BOOT",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETHCLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2837-rpi-cm3-io3.dts b/roms/u-boot/arch/arm/dts/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 000000000..6c8233a36
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+	model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "GPIO46",
+			  "GPIO47",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2837-rpi-cm3.dtsi b/roms/u-boot/arch/arm/dts/bcm2837-rpi-cm3.dtsi
new file mode 100644
index 000000000..81399b2c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2837-rpi-cm3.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+
+/ {
+	memory@0 {
+		reg = <0 0x40000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_HPD_N",
+				  "EMMC_EN_N",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC";
+		status = "okay";
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm2837.dtsi b/roms/u-boot/arch/arm/dts/bcm2837.dtsi
new file mode 100644
index 000000000..beb6c502d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm2837.dtsi
@@ -0,0 +1,93 @@
+#include "bcm283x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	412000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2837-thermal";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm283x-rpi-lan7515.dtsi b/roms/u-boot/arch/arm/dts/bcm283x-rpi-lan7515.dtsi
new file mode 100644
index 000000000..70bece63f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm283x-rpi-lan7515.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb-port@1 {
+			compatible = "usb424,2514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,7800";
+				reg = <1>;
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm283x-rpi-smsc9512.dtsi b/roms/u-boot/arch/arm/dts/bcm283x-rpi-smsc9512.dtsi
new file mode 100644
index 000000000..967e081cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm283x-rpi-smsc9512.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm283x-rpi-smsc9514.dtsi b/roms/u-boot/arch/arm/dts/bcm283x-rpi-smsc9514.dtsi
new file mode 100644
index 000000000..dc7ae776d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm283x-rpi-usb-host.dtsi b/roms/u-boot/arch/arm/dts/bcm283x-rpi-usb-host.dtsi
new file mode 100644
index 000000000..73f4ece8d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1,3 @@
+&usb {
+	dr_mode = "host";
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm283x-rpi-usb-otg.dtsi b/roms/u-boot/arch/arm/dts/bcm283x-rpi-usb-otg.dtsi
new file mode 100644
index 000000000..e2fd9610e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm283x-rpi-usb-otg.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "otg";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	/*
+	 * According to dwc2 the sum of all device EP
+	 * fifo sizes shouldn't exceed 3776 bytes.
+	 */
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm283x-u-boot.dtsi b/roms/u-boot/arch/arm/dts/bcm283x-u-boot.dtsi
new file mode 100644
index 000000000..68d03627f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm283x-u-boot.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot addition to keep baudrate set by firmware
+ * and also initialize before relocation.
+ *
+ * (C) Copyright 2016 Fabian Vogt <fvogt@suse.com>
+ */
+
+&uart0 {
+	skip-init;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	skip-init;
+	u-boot,dm-pre-reloc;
+};
+
+&gpio {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0_gpio14 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart1_gpio14 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm283x.dtsi b/roms/u-boot/arch/arm/dts/bcm283x.dtsi
new file mode 100644
index 000000000..9777644c6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm283x.dtsi
@@ -0,0 +1,677 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <80000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		txp@7e004000 {
+			compatible = "brcm,bcm2835-txp";
+			reg = <0x7e004000 0x20>;
+			interrupts = <1 11>;
+		};
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     /* dma channel 11-14 share one irq */
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
+				     <1 28>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives almost everything from the
+			 * platform's oscillator.  However, the DSI
+			 * pixel clocks come from the DSI analog PHY.
+			 */
+			clocks = <&clk_osc>,
+				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
+		mailbox: mailbox@7e00b880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			/* Defines pin muxing groups according to
+			 * BCM2835-ARM-Peripherals.pdf page 102.
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi_gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc_gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0_gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1_gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1_gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1_gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2_gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2_gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+				brcm,pull = <BCM2835_PUD_OFF>;
+			};
+
+			i2c0_gpio0: i2c0_gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio28: i2c0_gpio28 {
+				brcm,pins = <28 29>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1_gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			i2c_slave_gpio18: i2c_slave_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			jtag_gpio4: jtag_gpio4 {
+				brcm,pins = <4 5 6 12 13>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			jtag_gpio22: jtag_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm_gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			pwm0_gpio12: pwm0_gpio12 {
+				brcm,pins = <12>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm0_gpio18: pwm0_gpio18 {
+				brcm,pins = <18>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			pwm0_gpio40: pwm0_gpio40 {
+				brcm,pins = <40>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio13: pwm1_gpio13 {
+				brcm,pins = <13>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio19: pwm1_gpio19 {
+				brcm,pins = <19>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			pwm1_gpio41: pwm1_gpio41 {
+				brcm,pins = <41>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio45: pwm1_gpio45 {
+				brcm,pins = <45>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			sdhost_gpio48: sdhost_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0_gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0_gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1_gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2_gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow control.
+			 */
+			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+			};
+			uart0_gpio32: uart0_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+			};
+			uart0_gpio36: uart0_gpio36 {
+				brcm,pins = <36 37>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+				brcm,pins = <38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			uart1_gpio14: uart1_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio40: uart1_gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		sdhost: mmc@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			dmas = <&dma 13>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;
+
+			dmas = <&dma 2>,
+			       <&dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x1000>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
+		dpi: dpi@7e208000 {
+			compatible = "brcm,bcm2835-dpi";
+			reg = <0x7e208000 0x8c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>,
+				 <&clocks BCM2835_CLOCK_DPI>;
+			clock-names = "core", "pixel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dsi0: dsi@7e209000 {
+			compatible = "brcm,bcm2835-dsi0";
+			reg = <0x7e209000 0x78>;
+			interrupts = <2 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLA_DSI0>,
+				 <&clocks BCM2835_CLOCK_DSI0E>,
+				 <&clocks BCM2835_CLOCK_DSI0P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi0_byte",
+					     "dsi0_ddr2",
+					     "dsi0_ddr";
+
+		};
+
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		aux: aux@7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		sdhci: sdhci@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
+		dsi1: dsi@7e700000 {
+			compatible = "brcm,bcm2835-dsi1";
+			reg = <0x7e700000 0x8c>;
+			interrupts = <2 12>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLD_DSI1>,
+				 <&clocks BCM2835_CLOCK_DSI1E>,
+				 <&clocks BCM2835_CLOCK_DSI1P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi1_byte",
+					     "dsi1_ddr2",
+					     "dsi1_ddr";
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+		clk_usb: clock@4 {
+			compatible = "fixed-clock";
+			reg = <4>;
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
+	};
+
+	usbphy: phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm63158.dtsi b/roms/u-boot/arch/arm/dts/bcm63158.dtsi
new file mode 100644
index 000000000..7dd285843
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm63158.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "brcm,bcm63158";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		spi0 = &hsspi;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+		u-boot,dm-pre-reloc;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0xbebc200>;
+			u-boot,dm-pre-reloc;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_osc>;
+			clock-mult = <2>;
+			clock-div = <1>;
+		};
+
+		refclk50mhz: refclk50mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	ubus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		u-boot,dm-pre-reloc;
+
+		uart0: serial@ff812000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xff812000 0x0 0x1000>;
+			clock = <50000000>;
+
+			status = "disabled";
+		};
+
+		leds: led-controller@ff800800 {
+			compatible = "brcm,bcm6858-leds";
+			reg = <0x0 0xff800800 0x0 0xe4>;
+
+			status = "disabled";
+		};
+
+		wdt1: watchdog@ff800480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x0 0xff800480 0x0 0x14>;
+			clocks = <&refclk50mhz>;
+		};
+
+		wdt2: watchdog@ff8004c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x0 0xff8004c0 0x0 0x14>;
+			clocks = <&refclk50mhz>;
+		};
+
+		wdt-reboot {
+			compatible = "wdt-reboot";
+			wdt = <&wdt1>;
+		};
+
+		gpio0: gpio-controller@0xff800500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800500 0x0 0x4>,
+			      <0x0 0xff800520 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio1: gpio-controller@0xff800504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800504 0x0 0x4>,
+			      <0x0 0xff800524 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio2: gpio-controller@0xff800508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800508 0x0 0x4>,
+			      <0x0 0xff800528 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio3: gpio-controller@0xff80050c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff80050c 0x0 0x4>,
+			      <0x0 0xff80052c 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio4: gpio-controller@0xff800510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800510 0x0 0x4>,
+			      <0x0 0xff800530 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio5: gpio-controller@0xff800514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800514 0x0 0x4>,
+			      <0x0 0xff800534 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio6: gpio-controller@0xff800518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800518 0x0 0x4>,
+			      <0x0 0xff800538 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio7: gpio-controller@0xff80051c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff80051c 0x0 0x4>,
+			      <0x0 0xff80053c 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		hsspi: spi-controller@ff801000 {
+			compatible = "brcm,bcm6328-hsspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0xff801000 0x0 0x600>;
+			clocks = <&hsspi_pll>, <&hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			spi-max-frequency = <100000000>;
+			num-cs = <8>;
+
+			status = "disabled";
+		};
+
+		nand: nand-controller@ff801800 {
+			compatible = "brcm,nand-bcm63158",
+				     "brcm,brcmnand-v5.0",
+				     "brcm,brcmnand";
+			reg-names = "nand", "nand-int-base", "nand-cache";
+			reg = <0x0 0xff801800 0x0 0x180>,
+			      <0x0 0xff802000 0x0 0x10>,
+			      <0x0 0xff801c00 0x0 0x200>;
+			parameter-page-big-endian = <0>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm68360.dtsi b/roms/u-boot/arch/arm/dts/bcm68360.dtsi
new file mode 100644
index 000000000..7bbe20779
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm68360.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "brcm,bcm68360";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		spi0 = &hsspi;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+		u-boot,dm-pre-reloc;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			u-boot,dm-pre-reloc;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_osc>;
+			clock-mult = <2>;
+			clock-div = <1>;
+		};
+
+		refclk50mhz: refclk50mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	ubus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		u-boot,dm-pre-reloc;
+
+		wdt1: watchdog@ff800480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x0 0xff800480 0x0 0x14>;
+			clocks = <&refclk50mhz>;
+		};
+
+		wdt2: watchdog@ff8004c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x0 0xff8004c0 0x0 0x14>;
+			clocks = <&refclk50mhz>;
+		};
+
+		wdt-reboot {
+			compatible = "wdt-reboot";
+			wdt = <&wdt1>;
+		};
+
+		uart0: serial@ff800640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x0 0xff800640 0x0 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		leds: led-controller@ff800800 {
+			compatible = "brcm,bcm6858-leds";
+			reg = <0x0 0xff800800 0x0 0xe4>;
+
+			status = "disabled";
+		};
+
+		gpio0: gpio-controller@0xff800500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800500 0x0 0x4>,
+			      <0x0 0xff800520 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio1: gpio-controller@0xff800504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800504 0x0 0x4>,
+			      <0x0 0xff800524 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio2: gpio-controller@0xff800508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800508 0x0 0x4>,
+			      <0x0 0xff800528 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio3: gpio-controller@0xff80050c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff80050c 0x0 0x4>,
+			      <0x0 0xff80052c 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio4: gpio-controller@0xff800510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800510 0x0 0x4>,
+			      <0x0 0xff800530 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio5: gpio-controller@0xff800514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800514 0x0 0x4>,
+			      <0x0 0xff800534 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio6: gpio-controller@0xff800518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800518 0x0 0x4>,
+			      <0x0 0xff800538 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio7: gpio-controller@0xff80051c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff80051c 0x0 0x4>,
+			      <0x0 0xff80053c 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		hsspi: spi-controller@ff801000 {
+			compatible = "brcm,bcm6328-hsspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0xff801000 0x0 0x600>;
+			clocks = <&hsspi_pll>, <&hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			spi-max-frequency = <100000000>;
+			num-cs = <8>;
+
+			status = "disabled";
+		};
+
+		nand: nand-controller@ff801800 {
+			compatible = "brcm,nand-bcm68360",
+				     "brcm,brcmnand-v5.0",
+				     "brcm,brcmnand";
+			reg-names = "nand", "nand-int-base", "nand-cache";
+			reg = <0x0 0xff801800 0x0 0x180>,
+			      <0x0 0xff802000 0x0 0x10>,
+			      <0x0 0xff801c00 0x0 0x200>;
+			parameter-page-big-endian = <0>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm6858.dtsi b/roms/u-boot/arch/arm/dts/bcm6858.dtsi
new file mode 100644
index 000000000..022256217
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm6858.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "brcm,bcm6858";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		spi0 = &hsspi;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+		u-boot,dm-pre-reloc;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			u-boot,dm-pre-reloc;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_osc>;
+			clock-mult = <2>;
+			clock-div = <1>;
+		};
+
+		refclk50mhz: refclk50mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	ubus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		u-boot,dm-pre-reloc;
+
+		uart0: serial@ff800640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x0 0xff800640 0x0 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		leds: led-controller@ff800800 {
+			compatible = "brcm,bcm6858-leds";
+			reg = <0x0 0xff800800 0x0 0xe4>;
+
+			status = "disabled";
+		};
+
+		wdt1: watchdog@ff802780 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x0 0xff802780 0x0 0x14>;
+			clocks = <&refclk50mhz>;
+		};
+
+		wdt2: watchdog@ff8027c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x0 0xff8027c0 0x0 0x14>;
+			clocks = <&refclk50mhz>;
+		};
+
+		wdt-reboot {
+			compatible = "wdt-reboot";
+			wdt = <&wdt1>;
+		};
+
+		gpio0: gpio-controller@0xff800500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800500 0x0 0x4>,
+			      <0x0 0xff800520 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio1: gpio-controller@0xff800504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800504 0x0 0x4>,
+			      <0x0 0xff800524 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio2: gpio-controller@0xff800508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800508 0x0 0x4>,
+			      <0x0 0xff800528 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio3: gpio-controller@0xff80050c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff80050c 0x0 0x4>,
+			      <0x0 0xff80052c 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio4: gpio-controller@0xff800510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800510 0x0 0x4>,
+			      <0x0 0xff800530 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio5: gpio-controller@0xff800514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800514 0x0 0x4>,
+			      <0x0 0xff800534 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio6: gpio-controller@0xff800518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff800518 0x0 0x4>,
+			      <0x0 0xff800538 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		gpio7: gpio-controller@0xff80051c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x0 0xff80051c 0x0 0x4>,
+			      <0x0 0xff80053c 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		hsspi: spi-controller@ff801000 {
+			compatible = "brcm,bcm6328-hsspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0xff801000 0x0 0x600>;
+			clocks = <&hsspi_pll>, <&hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			spi-max-frequency = <100000000>;
+			num-cs = <8>;
+
+			status = "disabled";
+		};
+
+		nand: nand-controller@ff801800 {
+			compatible = "brcm,nand-bcm6858",
+				     "brcm,brcmnand-v5.0",
+				     "brcm,brcmnand";
+			reg-names = "nand", "nand-int-base", "nand-cache";
+			reg = <0x0 0xff801800 0x0 0x180>,
+			      <0x0 0xff802000 0x0 0x10>,
+			      <0x0 0xff801c00 0x0 0x200>;
+			parameter-page-big-endian = <0>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm963158.dts b/roms/u-boot/arch/arm/dts/bcm963158.dts
new file mode 100644
index 000000000..c2bdd3327
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm963158.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+/dts-v1/;
+
+#include "bcm63158.dtsi"
+
+/ {
+	model = "Broadcom bcm963158";
+	compatible = "broadcom,bcm963158", "brcm,bcm63158";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&gpio6 {
+	status = "okay";
+};
+
+&gpio7 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	write-protect = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sector-size = <16>;
+	};
+};
+
+&leds {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcm,serial-led-en-pol;
+	brcm,serial-led-data-ppol;
+
+	led@16 {
+		reg = <16>;
+		label = "red:dsl2";
+	};
+
+	led@17 {
+		reg = <17>;
+		label = "green:dsl1";
+	};
+
+	led@18 {
+		reg = <18>;
+		label = "green:fxs2";
+	};
+
+	led@19 {
+		reg = <19>;
+		label = "green:fxs1";
+	};
+
+	led@26 {
+		reg = <26>;
+		label = "green:wan1_act";
+	};
+
+	led@27 {
+		reg = <27>;
+		label = "green:wps";
+	};
+
+	led@28 {
+		reg = <28>;
+		active-low;
+		label = "green:aggregate_act";
+	};
+
+	led@29 {
+		reg = <29>;
+		label = "green:aggregate_link";
+	};
+};
+
+&hsspi {
+	status = "okay";
+
+	flash: mt25@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm968360bg.dts b/roms/u-boot/arch/arm/dts/bcm968360bg.dts
new file mode 100644
index 000000000..c060294cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm968360bg.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+/dts-v1/;
+
+#include "bcm68360.dtsi"
+
+/ {
+	model = "Broadcom bcm68360bg";
+	compatible = "broadcom,bcm68360bg", "brcm,bcm68360";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&gpio6 {
+	status = "okay";
+};
+
+&gpio7 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	write-protect = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sector-size = <16>;
+	};
+};
+
+&leds {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcm,serial-led-en-pol;
+	brcm,serial-led-data-ppol;
+
+	led@0 {
+		reg = <0>;
+		label = "red:alarm";
+	};
+
+	led@1 {
+		reg = <1>;
+		label = "green:wan";
+	};
+
+	led@2 {
+		reg = <2>;
+		label = "green:wps";
+	};
+
+	led@12 {
+		reg = <12>;
+		label = "orange:enet5.1";
+	};
+
+	led@13 {
+		reg = <13>;
+		label = "green:enet5.2";
+	};
+
+	led@14 {
+		reg = <14>;
+		label = "orange:enet5.2";
+	};
+
+	led@15 {
+		reg = <15>;
+		label = "green:enet5.1";
+	};
+
+	led@16 {
+		reg = <16>;
+		label = "green:usb1";
+	};
+
+	led@17 {
+		reg = <17>;
+		label = "green:voip1";
+	};
+
+	led@18 {
+		reg = <18>;
+		label = "green:voip2";
+	};
+
+	led@19 {
+		reg = <19>;
+		label = "green:enet6";
+	};
+
+	led@20 {
+		reg = <20>;
+		label = "orange:enet6";
+	};
+
+	led@21 {
+		reg = <21>;
+		label = "green:inet";
+	};
+
+	led@22 {
+		reg = <22>;
+		label = "green:usb2";
+	};
+};
+
+&hsspi {
+	status = "okay";
+
+	flash: mt25@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/bcm968580xref.dts b/roms/u-boot/arch/arm/dts/bcm968580xref.dts
new file mode 100644
index 000000000..a034e3831
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bcm968580xref.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+/dts-v1/;
+
+#include "bcm6858.dtsi"
+
+/ {
+	model = "Broadcom bcm68580xref";
+	compatible = "broadcom,bcm68580xref", "brcm,bcm6858";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&gpio6 {
+	status = "okay";
+};
+
+&gpio7 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	write-protect = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sector-size = <16>;
+	};
+};
+
+&leds {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcm,serial-led-en-pol;
+	brcm,serial-led-data-ppol;
+
+	led@2 {
+		reg = <2>;
+		label = "green:inet";
+	};
+
+	led@5 {
+		reg = <5>;
+		label = "red:alarm";
+	};
+
+	led@8 {
+		reg = <8>;
+		label = "green:wlan_link";
+	};
+
+	led@11 {
+		reg = <11>;
+		label = "green:fxs1";
+	};
+
+	led@14 {
+		reg = <14>;
+		label = "green:fxs2";
+	};
+
+	led@15 {
+		reg = <15>;
+		label = "green:usb0";
+	};
+
+	led@16 {
+		reg = <16>;
+		label = "green:usb1";
+	};
+
+	led@17 {
+		reg = <17>;
+		label = "green:wps";
+	};
+};
+
+&hsspi {
+	status = "okay";
+
+	flash: mt25@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/beacon-renesom-baseboard.dtsi b/roms/u-boot/arch/arm/dts/beacon-renesom-baseboard.dtsi
new file mode 100644
index 000000000..5f998d470
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/beacon-renesom-baseboard.dtsi
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clk/versaclock.h>
+
+/ {
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm2 0 25000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	backlight_dpi: backlight-dpi {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm0 0 25000>;
+		brightness-levels = <0 25 33 50 63 75 88 100>;
+		default-brightness-level = <6>;
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-1 { /* S19 */
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			label = "Up";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 { /*S20 */
+			gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+			label = "Left";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 { /* S21 */
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			label = "Down";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 { /* S22 */
+			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+			label = "Right";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-5 { /* S23 */
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			label = "Center";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led0 {
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+			linux,default-trigger = "heartbeat";
+		};
+		led1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
+	lvds {
+		compatible = "panel-lvds";
+		power-supply = <&reg_lcd_reset>;
+		width-mm = <223>;
+		height-mm = <125>;
+		backlight = <&backlight_lvds>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 800x480@60Hz */
+			clock-frequency = <30000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hsync-len = <48>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <13>;
+			vback-porch = <29>;
+			vsync-len = <1>;
+			hsync-active = <1>;
+			vsync-active = <3>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	rgb {
+		/* Different LCD with compatible timings */
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_dpi>;
+		enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd>;
+		port {
+			rgb_panel: endpoint {
+				remote-endpoint = <&du_out_rgb>;
+			};
+		};
+	};
+
+	reg_audio: regulator_audio {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd>;
+	};
+
+	reg_cam0: regulator_camera {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_cam1: regulator_camera {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+	};
+
+	sound_card {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+		dais = <&rsnd_port0>, <&rsnd_port1>;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	/* External DU dot clocks */
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+};
+
+&audio_clk_b {
+	clock-frequency = <22579200>;
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&du_out_rgb {
+	remote-endpoint = <&rgb_panel>;
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 3>;
+};
+
+&ehci1 {
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+};
+
+&hdmi0 {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dw_hdmi0_in: endpoint {
+				remote-endpoint = <&du_out_hdmi0>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	gpio_exp2: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp3: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp4: gpio@23 {
+		compatible = "onnn,pca9654";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	versaclock6_bb: clock-controller@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+
+		assigned-clocks = <&versaclock6_bb 1>,
+				   <&versaclock6_bb 2>,
+				   <&versaclock6_bb 3>,
+				   <&versaclock6_bb 4>;
+		assigned-clock-rates =	<24000000>, <24000000>, <24000000>, <24576000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&versaclock6_bb 3>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:Default */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:Default */
+			0x0000 /* 5:Default */
+		>;
+		port {
+			wm8962_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	/* 0 - lcd_reset */
+	/* 1 - lcd_pwr */
+	/* 2 - lcd_select */
+	/* 3 - backlight-enable */
+	/* 4 - Touch_shdwn */
+	/* 5 - LCD_H_pol */
+	/* 6 - lcd_V_pol */
+	gpio_exp1: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		wakeup-source;
+	};
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
+		function = "du";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	led_pins: leds {
+		/* GP_0_4 , AVS1, AVS2, GP_7_3 */
+		pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
+		bias-pull-down;
+	};
+
+	msiof1_pins: msiof1 {
+		groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
+		function = "msiof1";
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+
+	pwm2_pins: pwm2 {
+		groups = "pwm2_a";
+		function = "pwm2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		mux {
+			groups = "usb0";
+			function = "usb0";
+		};
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+	};
+
+	usb30_pins: usb30 {
+		mux {
+			groups = "usb30";
+			function = "usb30";
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_endpoint0: endpoint {
+				remote-endpoint = <&wm8962_endpoint>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint0>;
+				frame-master = <&rsnd_endpoint0>;
+
+				playback = <&ssi1 &dvc1 &src1>;
+				capture = <&ssi0>;
+			};
+		};
+		rsnd_port1: port@1 {
+		    reg = <0x01>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif5 {
+	pinctrl-0 = <&scif5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&tmu1 {
+	status = "okay";
+};
+
+&tmu2 {
+	status = "okay";
+};
+
+&tmu3 {
+	status = "okay";
+};
+
+&tmu4 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&vin0 {
+	status = "okay";
+};
+&vin1 {
+	status = "okay";
+};
+&vin2 {
+	status = "okay";
+};
+&vin3 {
+	status = "okay";
+};
+&vin4 {
+	status = "okay";
+};
+&vin5 {
+	status = "okay";
+};
+&vin6 {
+	status = "okay";
+};
+&vin7 {
+	status = "okay";
+};
+
+&xhci0
+{
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/beacon-renesom-som.dtsi b/roms/u-boot/arch/arm/dts/beacon-renesom-som.dtsi
new file mode 100644
index 000000000..9565495b4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/beacon-renesom-som.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/versaclock.h>
+
+/ {
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0xc000000>;
+	};
+
+	memory@57000000 {
+		device_type = "memory";
+		reg = <0x0 0x57000000 0x0 0x29000000>;
+	};
+
+	osc_32k: osc_32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wlan_pwrseq: wlan_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb_hub_reset {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		clock-names = "extclk";
+		max-speed = <4000000>;
+	};
+};
+
+&hscif2 {
+	status = "okay";
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_20_0",
+			"wl_reg_on",
+			"bt_reg_on",
+			"i2c4_20_3",
+			"i2c4_20_4",
+			"bt_dev_wake",
+			"i2c4_20_6",
+			"i2c4_20_7";
+	};
+
+	pca9654_lte: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_21_0",
+			"zoe_pwr_on",
+			"zoe_extint",
+			"zoe_reset_n",
+			"sara_reset",
+			"i2c4_21_5",
+			"sara_pwr_off",
+			"sara_networking_status";
+	};
+
+	eeprom@50 {
+		compatible = "microchip,at24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
+	versaclock5: versaclock_som@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
+		assigned-clocks = <&versaclock5 1>,
+				   <&versaclock5 2>,
+				   <&versaclock5 3>,
+				   <&versaclock5 4>;
+
+		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a";
+		function = "hscif2";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif5_pins: scif5 {
+		groups = "scif5_data_a";
+		function = "scif5";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi2_pins>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	cap-power-off-card;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb2_clksel {
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+		 <&versaclock5 3>, <&usb3s0_clk>;
+	clock-names = "ehci_ohci", "hs-usb-if",
+		      "usb_extal", "usb_xtal";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/bitmain-antminer-s9.dts b/roms/u-boot/arch/arm/dts/bitmain-antminer-s9.dts
new file mode 100644
index 000000000..069435055
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bitmain-antminer-s9.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Bitmain Antminer S9 board DTS
+ *
+ * Copyright (C) 2018 Michal Simek
+ * Copyright (C) 2018 VanguardiaSur
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Bitmain Antminer S9 Board";
+	compatible = "bitmain,antminer-s9", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+		gpio0 = &gpio0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		bootcount@efffff0 {
+			reg = <0xefffff0 0x10>;
+			no-map;
+		};
+
+		fpga_space@f000000 {
+			reg = <0xf000000 0x1000000>;
+			no-map;
+		};
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&nand0 {
+	status = "okay";
+};
+
+&smcc {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	/* 0362/5e62 */
+	ethernet_phy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	disable-wp;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&watchdog0 {
+	reset-on-timeout;
+	timeout-sec = <200>;
+};
diff --git a/roms/u-boot/arch/arm/dts/bubblegum_96.dts b/roms/u-boot/arch/arm/dts/bubblegum_96.dts
new file mode 100644
index 000000000..5b58d1559
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/bubblegum_96.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Device Tree Source for Bubblegum-96
+//
+// Copyright (C) 2015 Actions Semi Co., Ltd.
+// Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+/dts-v1/;
+#include "s900.dtsi"
+
+/ {
+	model = "Bubblegum-96";
+	compatible = "ucrobotics,bubblegum-96", "actions,s900";
+
+	aliases {
+		serial5 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/ca-presidio-engboard.dts b/roms/u-boot/arch/arm/dts/ca-presidio-engboard.dts
new file mode 100644
index 000000000..8c1e3797d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ca-presidio-engboard.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020, Cortina Access Inc.
+ */
+
+/dts-v1/;
+
+/ {
+   #address-cells = <2>;
+   #size-cells = <1>;
+
+	mmc0: mmc@f4400000 {
+		compatible = "cortina,ca-mmc";
+		reg = <0x0 0xf4400000 0x1000>;
+		bus-width = <4>;
+		sd_dll_ctrl = <0xf43200e8>;
+		io_drv_ctrl = <0xf432004c>;
+	};
+
+	gpio0: gpio-controller@0xf4329280  {
+		compatible = "cortina,ca-gpio";
+		reg = <0x0 0xf4329280 0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+	gpio1: gpio-controller@0xf43292a4  {
+		compatible = "cortina,ca-gpio";
+		reg = <0x0 0xf43292a4 0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "disabled";
+	};
+
+	watchdog: watchdog@0xf432901c {
+		compatible = "cortina,ca-wdt";
+		reg = <0x0 0xf432901c 0x34>,
+		      <0x0 0xf4320020 0x04>;
+		status = "okay";
+	};
+
+	uart0: serial@0xf4329148  {
+		u-boot,dm-pre-reloc;
+		compatible = "cortina,ca-uart";
+		reg = <0x0 0xf4329148 0x30>;
+		status = "okay";
+	};
+
+	i2c: i2c@f4329120 {
+		compatible = "cortina,ca-i2c";
+		reg = <0x0 0xf4329120 0x28>;
+		clock-frequency = <400000>;
+	};
+
+	nand: nand-controller@f4324000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "cortina,ca-nand";
+		reg = <0 0xf4324000 0x3b0>, /* NAND controller */
+		      <0 0xf7001000 0xb4>, /* DMA_GLOBAL */
+		      <0 0xf7001a00 0x80>; /* DMA channel0 for FLASH */
+		status = "okay";
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;    /* Must be 1024 */
+		nand_flash_base_addr = <0xe0000000>;
+	};
+
+	sflash: sflash-controller@f4324000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "cortina,ca-sflash";
+		reg = <0x0 0xf4324000 0x50>;
+		reg-names = "sflash-regs";
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			spi-rx-bus-width = <1>;
+			spi-max-frequency = <108000000>;
+		};
+	};
+
+	leds: led-controller@f43200f0 {
+		compatible = "cortina,ca-leds";
+		reg = <0x0 0xf43200f0 0x40>;
+
+		cortina,blink-rate1 = <256>;
+		cortina,blink-rate2 = <512>;
+
+		led@0 {
+			pin = <0>;
+			active-low;
+			blink-sel =<0>;
+			port = <0>;
+			off-event = <0>;
+			label = "led0";
+		};
+
+		led@1 {
+			pin = <1>;
+			active-low;
+			blink-sel =<1>;
+			label = "led1";
+		};
+
+		led@2 {
+			pin = <2>;
+			active-low;
+			label = "led2";
+		};
+
+	};
+
+	eth: ethnet@0xf4300000 {
+		compatible = "eth_cortina";
+		reg = <0x0 0xf4320000 0x34>,
+		      <0x0 0xf43290d8 0x04>,
+		      <0x0 0xf4304000 0x04>;
+
+		/* port0: phy address 1 - GMAC0: port 0
+		 * port1: phy address 2 - GMAC1: port 1
+		 * port2: phy address 3 - GMAC2: port 2
+		 * port3: phy address 4 - GMAC3: port 3
+		 * port4: phy address 5 - RGMII: port 4
+		 */
+		valid-port-map = <0x1f>;
+		valid-port-num = <5>;
+		valid-ports = <0x1 0x0>,
+			      <0x2 0x1>,
+			      <0x3 0x2>,
+			      <0x4 0x3>,
+			      <0x5 0x4>;
+		def-active-port = <0x3>;
+		inter-gphy-num = <6>;
+		inter-gphy-val = <0xf43380fc 0xbcd>,
+				 <0xf43380dc 0xeeee>,
+				 <0xf43380d8 0xeeee>,
+				 <0xf43380fc 0xbce>,
+				 <0xf43380c0 0x7777>,
+				 <0xf43380c4 0x7777>;
+		init-rgmii = <1>;
+		ni-xram-base = <0xF4500000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/cat875.dtsi b/roms/u-boot/arch/arm/dts/cat875.dtsi
new file mode 100644
index 000000000..4a2f6fa95
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cat875.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux sub board for CAT874 (CAT875)
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/ {
+	model = "Silicon Linux sub board for CAT874 (CAT875)";
+
+	aliases {
+		ethernet0 = &avb;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		mux {
+			groups = "avb_mii";
+			function = "avb";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9130-crb-A.dts b/roms/u-boot/arch/arm/dts/cn9130-crb-A.dts
new file mode 100644
index 000000000..fcfcd15d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9130-crb-A.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ */
+
+#include "cn9130-crb.dtsi"
+
+/ {
+	model = "CN9130-CRB-A";
+	compatible = "marvell,cn9130-crb-A",
+		"marvell,cn9130",
+		"marvell,armada-ap806-quad",
+		"marvell,armada-ap806";
+};
+
+&cp0_comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy3 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+
+	phy5 {
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
+	};
+};
+
+&cp0_pcie0 {
+	num-lanes = <4>;
+		/* non-prefetchable memory */
+	ranges =<0x82000000 0 0xc0000000 0 0xc0000000 0 0x2000000>;
+	status = "disabled";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9130-crb-B.dts b/roms/u-boot/arch/arm/dts/cn9130-crb-B.dts
new file mode 100644
index 000000000..b681b6032
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9130-crb-B.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ */
+
+#include "cn9130-crb.dtsi"
+
+/ {
+	model = "CN9130-CRB-B";
+	compatible = "marvell,cn9130-crb-B",
+		"marvell,cn9130",
+		"marvell,armada-ap806-quad",
+		"marvell,armada-ap806";
+};
+
+&cp0_comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_USB3_HOST0>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_SATA0>;
+	};
+
+	phy3 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+
+	phy5 {
+		phy-type = <COMPHY_TYPE_SGMII2>;
+		phy-speed = <COMPHY_SPEED_3_125G>;
+	};
+};
+
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	num-lanes = <1>;
+		/* non-prefetchable memory */
+	ranges =<0x82000000 0 0xc0000000 0 0xc0000000 0 0x2000000>;
+	status = "disabled";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9130-crb.dtsi b/roms/u-boot/arch/arm/dts/cn9130-crb.dtsi
new file mode 100644
index 000000000..b22972518
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9130-crb.dtsi
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ */
+
+#include "cn9130.dtsi" /* include SoC device tree */
+
+/ {
+	model = "CN9130-CRB";
+	compatible = "marvell,cn9130-crb",
+		"marvell,cn9130",
+		"marvell,armada-ap806-quad",
+		"marvell,armada-ap806";
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		spi0 = &cp0_spi1;
+		gpio0 = &ap_gpio0;
+		gpio1 = &cp0_gpio0;
+		gpio2 = &cp0_gpio1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	cp0 {
+		config-space {
+			sdhci@780000 {
+				vqmmc-supply = <&cp0_reg_sd_vccq>;
+				vmmc-supply = <&cp0_reg_sd_vcc>;
+			};
+			cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+				compatible = "regulator-gpio";
+				regulator-name = "cp0_sd_vccq";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				gpios = <&cp0_gpio1 18 GPIO_ACTIVE_HIGH>;
+				states = <1800000 0x1
+					  3300000 0x0>;
+			};
+			cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp0_sd_vcc";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				gpio = <&cp0_gpio1 22 GPIO_ACTIVE_HIGH>;
+				enable-active-high;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/*
+ * AP related configuration
+ */
+&ap_pinctl {
+	/* MPP Bus:
+	 * SDIO  [0-10, 12]
+	 * UART0 [11,19]
+	 */
+		/*   0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 1 1 1 1
+		     1 3 1 0 0 0 0 0 0 3 >;
+};
+
+/* on-board eMMC - U6 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ap_emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+/*
+ * CP related configuration
+ */
+&cp0_pinctl {
+	/* MPP Bus:
+	 *	[0-11]	RGMII1
+	 *	[12] GPIO
+	 *	[13-16] SPI1
+	 *	[17-32] GPIO
+	 *	[33]	SD_PWR_OFF
+	 *	[34]	CP_PCIE0_CLKREQn
+	 *	[35-38]	I2C1 I2C0
+	 *	[39]	GPIO
+	 *	[40-43]	SMI/XSMI
+	 *	[44-46]	GPIO
+	 *	[47]	UART1_TX
+	 *	[48]	GPIO
+	 *	[49]	SD_HST_18_EN
+	 *	[50]	GPIO
+	 *	[51]	SD_PWR_0
+	 *	[52]	PCIE_RSTn
+	 *	[53]	UART1_RX
+	 *	[54]	GPIO
+	 *	[55]	SD_DT
+	 *	[56-61]	SDIO
+	 *
+	 * Note that CRB board revisions have different MPP configurations.
+	 * r1p2 has SPI flash on MPP[30:27] and r1p3.1, which is the latest
+	 * board revision, has it mapped to MPP[16:13].
+	 */
+		/*   0   1   2   3   4   5   6   7   8   9 */
+	pin-func = < 3   3   3   3   3   3   3   3   3   3
+		     3   3   0   3   3   3   3   0   0   0
+		     0   0   0   0   0   0   0   0   0   0
+		     0   0   0   6   9   2   2   2   2   0
+		     8   8   8   8   0   0   0   7   0   0xa
+		     0   0xa 9   7   0   0xb 0xe 0xe 0xe 0xe
+		     0xe 0xe 0xe>;
+
+	cp0_sdhci_cd_pins_crb: cp0-sdhci-cd-pins-crb {
+		marvell,pins = < 55 >;
+		marvell,function = <0>;
+	};
+
+	cp0_spi1_pins_crb: cp0-spi-pins-crb {
+		marvell,pins = < 13 14 15 16 >;
+		marvell,function = <3>;
+	};
+
+	cp0_smi_pins_crb: cp0-smi-pins-crb {
+		marvell,pins = < 40 41 >;
+		marvell,function = <8>;
+	};
+
+	cp0_xsmi_pins_crb: cp0-xsmi-pins-crb {
+		marvell,pins = < 42 43 >;
+		marvell,function = <8>;
+	};
+
+};
+
+/*
+ * CP0
+ */
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+};
+
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins
+		     &cp0_sdhci_cd_pins_crb>;
+	bus-width = <4>;
+	vqmmc-supply = <&cp0_reg_sd_vccq>;
+	vmmc-supply = <&cp0_reg_sd_vcc>;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins_crb>;
+	reg = <0x700680 0x50>,		/* control */
+	      <0x2000000 0x1000000>,	/* CS0 */
+	      <0 0xffffffff>,		/* CS1 */
+	      <0 0xffffffff>,		/* CS2 */
+	      <0 0xffffffff>;		/* CS3 */
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor", "spi-flash";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_utmi0 {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "okay";
+};
+
+&cp0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_smi_pins_crb>;
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	switch6: ethernet-switch@6 {
+		reg = <6>;
+	};
+};
+
+&cp0_xmdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_xsmi_pins_crb>;
+	status = "okay";
+	nbaset_phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "sfi";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_ge1_rgmii_pins>;
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	/* Disable it for now, as mainline does not support this IF yet */
+	status = "disabled";
+	phy = <&nbaset_phy0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9130-db-A.dts b/roms/u-boot/arch/arm/dts/cn9130-db-A.dts
new file mode 100644
index 000000000..90d6e4a26
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9130-db-A.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell CN9130 development board (CP NOR) setup(A)";
+
+	aliases {
+		spi0 = &cp0_spi1;
+	};
+};
+
+/*
+ * CP related configuration
+ */
+&cp0_pinctl {
+	/* MPP Bus:
+	 *	[0-11]	RGMII1
+	 *	[12]	GPIO GE-IN
+	 *	[13-16]	SPI1
+	 *	[17-27]	NAND
+	 *	[28]	MSS_GPIO[5] XXX:(mode nr from a3900)
+	 *	[29-30]	SATA
+	 *	[31]	MSS_GPIO[4] XXX:(mode nr from a3900)
+	 *	[32,34]	SMI
+	 *	[33]	SDIO
+	 *	[35-36]	I2C1
+	 *	[37-38]	I2C0
+	 *	[39-43]	SDIOctrl
+	 *	[44-55]	RGMII2
+	 *	[56-62]	SDIO
+	 */
+
+		/*   0   1   2   3   4   5   6   7   8   9 */
+	pin-func = < 3   3   3   3   3   3   3   3   3   3
+		     3   3   0   3   3   3   3   1   1   1
+		     1   1   1   1   1   1   1   1   3   9
+		     9   3   7   6   7   2   2   2   2   1
+		     1   1   1   1   1   1   1   1   1   1
+		     1   1   1   1   1   1   0xe 0xe 0xe 0xe
+		     0xe 0xe 0xe>;
+};
+
+/* U54 */
+&cp0_nand {
+	status = "disabled";
+};
+
+/* U55 */
+&cp0_spi1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9130-db-B.dts b/roms/u-boot/arch/arm/dts/cn9130-db-B.dts
new file mode 100644
index 000000000..fb52aa856
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9130-db-B.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell CN9130 development board (CP NAND) setup(B)";
+};
+
+/*
+ * CP related configuration
+ */
+&cp0_pinctl {
+	/* MPP Bus:
+	 *	[0-11]	RGMII1
+	 *	[12]	GPIO GE-IN
+	 *	[13-14]	SPI1
+	 *	[15-27]	NAND
+	 *	[28]	MSS_GPIO[5] XXX:(mode nr from a3900)
+	 *	[29-30]	SATA
+	 *	[31]	MSS_GPIO[4] XXX:(mode nr from a3900)
+	 *	[32,34]	SMI
+	 *	[33]	SDIO
+	 *	[35-36]	I2C1
+	 *	[37-38]	I2C0
+	 *	[39-43]	SDIOctrl
+	 *	[44-55]	RGMII2
+	 *	[56-62]	SDIO
+	 */
+
+		/*   0   1   2   3   4   5   6   7   8   9 */
+	pin-func = < 3   3   3   3   3   3   3   3   3   3
+		     3   3   0   2   3   1   1   1   1   1
+		     1   1   1   1   1   1   1   1   3   9
+		     9   3   7   6   7   2   2   2   2   1
+		     1   1   1   1   1   1   1   1   1   1
+		     1   1   1   1   1   1   0xe 0xe 0xe 0xe
+		     0xe 0xe 0xe>;
+};
+
+/* U54 */
+&cp0_nand {
+	status = "okay";
+};
+
+/* U55 */
+&cp0_spi1 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9130-db-dev-info.dtsi b/roms/u-boot/arch/arm/dts/cn9130-db-dev-info.dtsi
new file mode 100644
index 000000000..68e9c0bd1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9130-db-dev-info.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+/ {
+	/* This should go only into devel boards */
+	compatible = "marvell,cp110";
+	sar {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sar_fields {
+			compatible = "marvell,sample-at-reset";
+			reg = <0x4c 0x4e>;
+			chip_count = <2>;
+			bit_width = <5>;
+			freq {
+				key = "freq";
+				description = "CPU/DDR and PIDI frequencies";
+				start-bit = <0>;
+				bit-length = <4>;
+				option-cnt = <3>;
+				options = "0x0", "CPU/DDR = 0x0: 2000/1200 Mhz, PIDI = 0: 1Ghz",
+					  "0x2", "CPU/DDR = 0x6: 2200/1200 Mhz, PIDI = 0: 1Ghz",
+					  "0x4", "CPU/DDR = 0xD: 1600/1200 Mhz, PIDI = 0: 1Ghz";
+				default = <0x2>;
+				status = "okay";
+			};
+			boot_mode {
+				key = "boot_mode";
+				description = "Boot mode options";
+				start-bit = <4>;
+				bit-length = <6>;
+				option-cnt = <4>;
+				options = "0xE", "CP0_NAND PIDI BW-8bit, PS-4KB, ECC-4bit\t(supported configuration: B)",
+					  "0xF", "CP0_NAND PIDI BW-8bit, PS-4KB, ECC-8bit\t(supported configuration: B)",
+					  "0x2A", "AP_EMMC",
+					  "0x32", "CP1_SPI_1 24bits";
+				default = <0x32>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9130-db.dtsi b/roms/u-boot/arch/arm/dts/cn9130-db.dtsi
new file mode 100644
index 000000000..1b28732ee
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9130-db.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130.dtsi" /* include SoC device tree */
+#include "cn9130-db-dev-info.dtsi"
+
+/ {
+	model = "DB-CN-9130";
+	compatible = "marvell,cn9130-db", "marvell,cn91xx", "marvell,cn9030-vd",
+		     "marvell,cn9030", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		gpio0 = &ap_gpio0;
+		gpio1 = &cp0_gpio0;
+		gpio2 = &cp0_gpio1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	cp0 {
+		config-space {
+			i2c@701000 {
+				/* U36 */
+				expander0: pca953x@21 {
+					compatible = "nxp,pca9555";
+					#gpio-cells = <2>;
+					reg = <0x21>;
+					status = "okay";
+				};
+			};
+			sdhci@780000 {
+				vqmmc-supply = <&cp0_reg_sd_vccq>;
+				vmmc-supply = <&cp0_reg_sd_vcc>;
+			};
+
+			ap_reg_mmc_vccq: ap_mmc_vccq@0 {
+				compatible = "regulator-gpio";
+				regulator-name = "ap_mmc_vccq";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+				states = <1800000 0x1
+					  3300000 0x0>;
+			};
+			cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp0-xhci0-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp0-xhci1-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+			};
+			cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+				compatible = "regulator-gpio";
+				regulator-name = "cp0_sd_vccq";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+				states = <1800000 0x1
+					  3300000 0x0>;
+			};
+			cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp0_sd_vcc";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+				enable-active-high;
+				regulator-always-on;
+			};
+			cp0_reg_usb3_current_lim0:cp0_usb3_current_limiter@0 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			cp0_reg_usb3_current_lim1: cp0_usb3_current_limiter@1 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&expander0 5 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/*
+ * AP related configuration
+ */
+&ap_pinctl {
+	/* MPP Bus:
+	 * SDIO  [0-10, 12]
+	 * UART0 [11,19]
+	 */
+		/*   0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 1 1 1 1
+		     1 3 1 0 0 0 0 0 0 3 >;
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ap_emmc_pins>;
+	vqmmc-supply = <&ap_reg_mmc_vccq>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	status = "okay";
+};
+
+/*
+ * CP related configuration
+ */
+&cp0_pinctl {
+	cp0_nand_pins: cp0-nand-pins {
+		marvell,pins = <15 16 17 18 19 20 21 22 23 24 25 26 27 >;
+		marvell,function = <1>;
+	};
+	cp0_nand_rb: cp0-nand-rb {
+		marvell,pins = < 13 >;
+		marvell,function = <2>;
+	};
+};
+
+/*
+ * CP0
+ */
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_i2c1 {
+	status = "okay";
+};
+
+/* CON 28 */
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* U54 */
+&cp0_nand {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_nand_pins &cp0_nand_rb>;
+	status = "disabled";
+};
+
+/* U55 */
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	reg = <0x700680 0x50>,		/* control */
+	      <0x2000000 0x1000000>,	/* CS0 */
+	      <0 0xffffffff>,		/* CS1 */
+	      <0 0xffffffff>,		/* CS2 */
+	      <0 0xffffffff>;		/* CS3 */
+	status = "disabled";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor", "spi-flash";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy3 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+
+	phy5 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+	num-lanes = <4>;
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "sfi";
+};
+
+/* CON56 */
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+/* CON57 */
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
+/* SLM-1521-V2, CON2 */
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_utmi0 {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	vbus-supply = <&cp0_reg_usb3_vbus0>;
+	current-limiter = <&cp0_reg_usb3_current_lim0>;
+	vbus-disable-delay = <500>;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	vbus-supply = <&cp0_reg_usb3_vbus1>;
+	current-limiter = <&cp0_reg_usb3_current_lim1>;
+	vbus-disable-delay = <500>;
+};
+
+&cp0_pcie0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9130.dtsi b/roms/u-boot/arch/arm/dts/cn9130.dtsi
new file mode 100644
index 000000000..68b767a70
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9130.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for the CN 9030 SoC, made of an AP806 Quad and
+ * one CP110.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-common.dtsi"
+#include "armada-ap807.dtsi"
+#include "armada-ap80x-quad.dtsi"
+
+/* This defines used to calculate the base address of each CP */
+#define CP110_BASE_OFFSET		(0xf2000000)
+#define CP110_SPACE_SIZE		(0x02000000)
+#define CP110_BASE			(CP110_BASE_OFFSET + \
+						(CP110_NUM * CP110_SPACE_SIZE))
+
+#define CP110_PCIE_MEM_SIZE(iface)	((iface == 0) ? 0x1ff00000 : 0xf00000)
+#define CP110_PCIE_BUS_MEM_CFG		(0x82000000)
+
+/* CP110-0 Settings */
+#define CP110_NAME			cp0
+#define CP110_NUM			0
+#define CP110_PCIEx_CPU_MEM_BASE(iface)	((iface == 0) ? 0xc0000000 : \
+					 (0xe0000000 + (iface - 1) * 0x1000000))
+#define CP110_PCIEx_BUS_MEM_BASE(iface)	(CP110_PCIEx_CPU_MEM_BASE(iface))
+
+#include "armada-cp110.dtsi"
+
+/ {
+	model = "Marvell CN 9030";
+	compatible = "marvell,armada70x0", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp0_pinctl {
+	compatible = "marvell,mvebu-pinctrl", "marvell,armada-8k-cpm-pinctrl";
+	bank-name ="cp0-110";
+
+	cp0_i2c0_pins: cp0-i2c-pins-0 {
+		marvell,pins = < 37 38 >;
+		marvell,function = <2>;
+	};
+	cp0_i2c1_pins: cp0-i2c-pins-1 {
+		marvell,pins = < 35 36 >;
+		marvell,function = <2>;
+	};
+	cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+		marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11>;
+		marvell,function = <3>;
+	};
+	cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+		marvell,pins = < 44 45 46 47 48 49 50 51
+				52 53 54 55 >;
+		marvell,function = <1>;
+	};
+	cp0_pca0_pins: cp0-pca0_pins {
+		marvell,pins = <62>;
+		marvell,function = <0>;
+	};
+	cp0_sdhci_pins: cp0-sdhi-pins-0 {
+		marvell,pins = < 56 57 58 59 60 61 >;
+		marvell,function = <14>;
+	};
+	cp0_spi0_pins: cp0-spi-pins-0 {
+		marvell,pins = < 13 14 15 16 >;
+		marvell,function = <3>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9131-db-A.dts b/roms/u-boot/arch/arm/dts/cn9131-db-A.dts
new file mode 100644
index 000000000..81aff17e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9131-db-A.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130-db-A.dts"
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell CN9131 development board (CP NOR) setup(A)";
+	compatible = "marvell,cn9131-db", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp1_comphy {
+	/* Serdes Configuration:
+	 *	Lane 0: PCIe0 (x2)
+	 *	Lane 1: PCIe0 (x2)
+	 *	Lane 2: unconnected
+	 *	Lane 3: USB1
+	 *	Lane 4: SFP (port 0)
+	 *	Lane 5: SATA1
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "sfi"; /* lane-4 */
+	marvell,sfp-tx-disable-gpio = <&cp1_gpio0 9 GPIO_ACTIVE_HIGH>;
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9131-db-B.dts b/roms/u-boot/arch/arm/dts/cn9131-db-B.dts
new file mode 100644
index 000000000..026918362
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9131-db-B.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130-db-B.dts"
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell CN9131 development board (CP NAND) setup(B)";
+	compatible = "marvell,cn9131-db", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp1_comphy {
+	/* Serdes Configuration:
+	 *	Lane 0: PCIe0 (x2)
+	 *	Lane 1: PCIe0 (x2)
+	 *	Lane 2: SFI (port 0)
+	 *	Lane 3: USB1
+	 *	Lane 4: SGMII (port 1)
+	 *	Lane 5: SATA1
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* 3310 RJ45 CON55 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "sfi"; /* lane-2 */
+	phy = <&sfi_phy8>; /* required by 3310 fw download */
+};
+
+/* CON50 */
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "sgmii"; /* lane-4 */
+	marvell,sfp-tx-disable-gpio = <&cp1_gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&cp1_xmdio {
+	status = "okay";
+	sfi_phy8: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9131-db.dtsi b/roms/u-boot/arch/arm/dts/cn9131-db.dtsi
new file mode 100644
index 000000000..505760558
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9131-db.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#undef CP110_NAME
+#undef CP110_NUM
+#undef CP110_PCIE_MEM_SIZE
+#undef CP110_PCIEx_CPU_MEM_BASE
+#undef CP110_PCIEx_BUS_MEM_BASE
+
+/* CP110-1 Settings */
+#define CP110_NAME			cp1
+#define CP110_NUM			1
+#define CP110_PCIE_MEM_SIZE(iface)	(0xf00000)
+#define CP110_PCIEx_CPU_MEM_BASE(iface)	(0xe2000000 + (iface) * 0x1000000)
+#define CP110_PCIEx_BUS_MEM_BASE(iface)	(CP110_PCIEx_CPU_MEM_BASE(iface))
+
+#include "armada-cp110.dtsi"
+
+/ {
+	model = "Marvell CN9131 development board";
+	compatible = "marvell,cn9131-db";
+
+	aliases {
+		gpio3 = &cp1_gpio0;
+		gpio4 = &cp1_gpio1;
+	};
+
+	cp1 {
+		config-space {
+			cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+				compatible = "regulator-fixed";
+				pinctrl-names = "default";
+				pinctrl-0 = <&cp1_xhci0_vbus_pins>;
+				regulator-name = "cp1-xhci0-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&cp1_gpio0 3 GPIO_ACTIVE_HIGH>;
+			};
+			cp1_reg_usb3_current_lim0: cp1_usb3_current_limiter@0 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&cp1_gpio0 2 GPIO_ACTIVE_HIGH>;
+			};
+			cp1_pcie_reset_pins: cp1-pcie-reset-pins {
+				marvell,pins = <0>;
+				marvell,function = <0>;
+			};
+		};
+	};
+};
+
+&cp1_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON40 */
+&cp1_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_pcie_reset_pins>;
+	marvell,reset-gpio = <&cp1_gpio0 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	num-lanes = <2>;
+		/* non-prefetchable memory */
+	ranges = <0x82000000 0 0xe2000000 0 0xe2000000 0 0xf00000>;
+};
+
+&cp1_pinctl {
+	compatible = "marvell,mvebu-pinctrl",
+		     "marvell,cp115-standalone-pinctrl";
+	bank-name ="cp1-110";
+
+	/* MPP Bus:
+	 *	[0-12]	GPIO
+	 *	[13-16]	SPI1
+	 *	[17-27]	GPIO (Default)
+	 *	[28]	SATA1_PRESENT_ACTIVEn
+	 *	[29-34]	GPIO (Default)
+	 *	[35-36]	xSMI
+	 *	[37-38] I2C0
+	 *	[39-62]	GPIO
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x3  0x3  0x3  0x3  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x9  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x7  0x7  0x2  0x2  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0 >;
+
+	cp1_i2c0_pins: cp1-i2c-pins-0 {
+		marvell,pins = < 37 38 >;
+		marvell,function = <2>;
+	};
+	cp1_spi0_pins: cp1-spi-pins-0 {
+		marvell,pins = < 13 14 15 16 >;
+		marvell,function = <3>;
+	};
+	cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+		marvell,pins = <3>;
+		marvell,function = <0>;
+	};
+};
+
+/* CON32 */
+&cp1_sata0 {
+	status = "okay";
+};
+
+/* U24 */
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi0_pins>;
+	reg = <0x700680 0x50>,		/* control */
+	      <0x2000000 0x1000000>,	/* CS0 */
+	      <0 0xffffffff>,		/* CS1 */
+	      <0 0xffffffff>,		/* CS2 */
+	      <0 0xffffffff>;		/* CS3 */
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor", "spi-flash";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+/* CON58 */
+&cp1_usb3_1 {
+	vbus-supply = <&cp1_reg_usb3_vbus0>;
+	current-limiter = <&cp1_reg_usb3_current_lim0>;
+	vbus-disable-delay = <500>;
+	status = "okay";
+};
+
+&cp1_utmi1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9132-db-A.dts b/roms/u-boot/arch/arm/dts/cn9132-db-A.dts
new file mode 100644
index 000000000..ba9b8a25d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9132-db-A.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9131-db-A.dts"
+#include "cn9132-db.dtsi"
+
+/ {
+	model = "Marvell CN9132 development board (CP NOR) setup(A)";
+	compatible = "marvell,cn9132-db", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9132-db-B.dts b/roms/u-boot/arch/arm/dts/cn9132-db-B.dts
new file mode 100644
index 000000000..e126e23ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9132-db-B.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9131-db-B.dts"
+#include "cn9132-db.dtsi"
+
+/ {
+	model = "Marvell CN9132 development board (CP NAND) setup(B)";
+	compatible = "marvell,cn9132-db-B", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
diff --git a/roms/u-boot/arch/arm/dts/cn9132-db.dtsi b/roms/u-boot/arch/arm/dts/cn9132-db.dtsi
new file mode 100644
index 000000000..d51a4d0b3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cn9132-db.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#undef CP110_NAME
+#undef CP110_NUM
+#undef CP110_PCIE_MEM_SIZE
+#undef CP110_PCIEx_CPU_MEM_BASE
+#undef CP110_PCIEx_BUS_MEM_BASE
+
+/* CP110-2 Settings */
+#define CP110_NAME			cp2
+#define CP110_NUM			2
+#define CP110_PCIE_MEM_SIZE(iface)	(0xf00000)
+#define CP110_PCIEx_CPU_MEM_BASE(iface)	(0xe5000000 + (iface) *  0x1000000)
+#define CP110_PCIEx_BUS_MEM_BASE(iface)	(CP110_PCIEx_CPU_MEM_BASE(iface))
+
+#include "armada-cp110.dtsi"
+
+/ {
+	model = "Marvell CN9132 development board";
+	compatible = "marvell,cn9132-db";
+
+	aliases {
+		gpio5 = &cp2_gpio0;
+		gpio6 = &cp2_gpio1;
+	};
+
+	cp2 {
+		config-space {
+			sdhci@780000 {
+				vqmmc-supply = <&cp2_reg_sd_vccq>;
+			};
+
+			cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp2-xhci0-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&cp2_gpio0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp2-xhci1-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&cp2_gpio0 3 GPIO_ACTIVE_HIGH>;
+			};
+			cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+				compatible = "regulator-gpio";
+				regulator-name = "cp2_sd_vcc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* cp2_mpp49 */
+				gpios = <&cp2_gpio1 17 GPIO_ACTIVE_HIGH>;
+				states = <1800000 0x1
+					  3300000 0x0>;
+			};
+			cp2_reg_usb3_current_lim0: cp2_usb3_current_limiter@0 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&cp2_gpio0 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			cp2_reg_usb3_current_lim1: cp2_usb3_current_limiter@1 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&cp2_gpio0 1 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
+
+&cp2_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp2_pinctl {
+	compatible = "marvell,mvebu-pinctrl",
+		     "marvell,cp115-standalone-pinctrl";
+	bank-name ="cp2-110";
+
+	/* MPP Bus:
+	 *	[0-26]		GPIO
+	 *	[27]		SATA0_PRESENT_ACTIVEn
+	 *	[28]		SATA1_PRESENT_ACTIVEn
+	 *	[29-31, 33]	GPIO (Default)
+	 *	[32,34]		SMI
+	 *	[37-38]		I2C0
+	 *	[39-53]		GPIO
+	 *	[54]		SD_CRD_RSTn (out)
+	 *	[55]		SD_CRD_DT (in)
+	 *	[56-62]		SDIO
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x9  0x9  0x0
+		     0x0  0x0  0x8  0x0  0x8  0x0  0x0  0x2  0x2  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0xa  0xb  0xe  0xe  0xe  0xe
+		     0xe  0xe  0xe >;
+
+	cp2_i2c0_pins: cp2-i2c-pins-0 {
+		marvell,pins = < 37 38 >;
+		marvell,function = <2>;
+	};
+
+	cp2_sdhci_pins: cp2-sdhi-pins-0 {
+		marvell,pins = < 56 57 58 59 60 61 >;
+		marvell,function = <14>;
+	};
+};
+
+&cp2_usb3_0 {
+	status = "okay";
+	vbus-supply = <&cp2_reg_usb3_vbus0>;
+	current-limiter = <&cp2_reg_usb3_current_lim0>;
+	vbus-disable-delay = <500>;
+};
+
+/* SLM-1521-V2, CON11 */
+&cp2_usb3_1 {
+	status = "okay";
+	vbus-supply = <&cp2_reg_usb3_vbus1>;
+	current-limiter = <&cp2_reg_usb3_current_lim1>;
+	vbus-disable-delay = <500>;
+	status = "okay";
+};
+
+&cp2_utmi0 {
+	status = "okay";
+};
+
+&cp2_utmi1 {
+	status = "okay";
+};
+
+&cp2_comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_SATA0>;
+	};
+
+	phy3 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+
+	phy5 {
+		phy-type = <COMPHY_TYPE_PEX2>;
+	};
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+	status = "okay";
+	phy-mode = "sfi";
+};
+
+/* SLM-1521-V2, CON6 */
+&cp2_pcie0 {
+	/* non-prefetchable memory */
+	ranges =<0x82000000 0 0xe5000000 0 0xe5000000 0 0x1000000>;
+	num-lanes = <2>;
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON8 */
+&cp2_pcie2 {
+	num-lanes = <1>;
+	status = "okay";
+};
+
+&cp2_pinctl {
+};
+
+/* SLM-1521-V2, CON4 */
+&cp2_sata0 {
+	status = "okay";
+};
+
+/* CON 2 on SLM-1683 - microSD */
+&cp2_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_sdhci_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/cros-ec-keyboard.dtsi b/roms/u-boot/arch/arm/dts/cros-ec-keyboard.dtsi
new file mode 100644
index 000000000..4a0c1037f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cros-ec-keyboard.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Keyboard dts fragment for devices that use cros-ec-keyboard
+ *
+ * Copyright (c) 2014 Google, Inc
+*/
+
+#include <dt-bindings/input/input.h>
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb";
+		keypad,num-rows = <8>;
+		keypad,num-columns = <13>;
+		google,needs-ghost-filter;
+
+		linux,keymap = <
+			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+			MATRIX_KEY(0x00, 0x02, KEY_F1)
+			MATRIX_KEY(0x00, 0x03, KEY_B)
+			MATRIX_KEY(0x00, 0x04, KEY_F10)
+			MATRIX_KEY(0x00, 0x05, KEY_RO)
+			MATRIX_KEY(0x00, 0x06, KEY_N)
+			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+			MATRIX_KEY(0x01, 0x01, KEY_ESC)
+			MATRIX_KEY(0x01, 0x02, KEY_F4)
+			MATRIX_KEY(0x01, 0x03, KEY_G)
+			MATRIX_KEY(0x01, 0x04, KEY_F7)
+			MATRIX_KEY(0x01, 0x06, KEY_H)
+			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+			MATRIX_KEY(0x01, 0x09, KEY_F9)
+			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+			MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
+
+			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+			MATRIX_KEY(0x02, 0x01, KEY_TAB)
+			MATRIX_KEY(0x02, 0x02, KEY_F3)
+			MATRIX_KEY(0x02, 0x03, KEY_T)
+			MATRIX_KEY(0x02, 0x04, KEY_F6)
+			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+			MATRIX_KEY(0x02, 0x06, KEY_Y)
+			MATRIX_KEY(0x02, 0x07, KEY_102ND)
+			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+			MATRIX_KEY(0x02, 0x09, KEY_F8)
+			MATRIX_KEY(0x02, 0x0a, KEY_YEN)
+
+			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+			MATRIX_KEY(0x03, 0x02, KEY_F2)
+			MATRIX_KEY(0x03, 0x03, KEY_5)
+			MATRIX_KEY(0x03, 0x04, KEY_F5)
+			MATRIX_KEY(0x03, 0x06, KEY_6)
+			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+			MATRIX_KEY(0x03, 0x09, KEY_F13)
+			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
+
+			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+			MATRIX_KEY(0x04, 0x01, KEY_A)
+			MATRIX_KEY(0x04, 0x02, KEY_D)
+			MATRIX_KEY(0x04, 0x03, KEY_F)
+			MATRIX_KEY(0x04, 0x04, KEY_S)
+			MATRIX_KEY(0x04, 0x05, KEY_K)
+			MATRIX_KEY(0x04, 0x06, KEY_J)
+			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+			MATRIX_KEY(0x04, 0x09, KEY_L)
+			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+			MATRIX_KEY(0x05, 0x01, KEY_Z)
+			MATRIX_KEY(0x05, 0x02, KEY_C)
+			MATRIX_KEY(0x05, 0x03, KEY_V)
+			MATRIX_KEY(0x05, 0x04, KEY_X)
+			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+			MATRIX_KEY(0x05, 0x06, KEY_M)
+			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+			MATRIX_KEY(0x05, 0x09, KEY_DOT)
+			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+			MATRIX_KEY(0x06, 0x01, KEY_1)
+			MATRIX_KEY(0x06, 0x02, KEY_3)
+			MATRIX_KEY(0x06, 0x03, KEY_4)
+			MATRIX_KEY(0x06, 0x04, KEY_2)
+			MATRIX_KEY(0x06, 0x05, KEY_8)
+			MATRIX_KEY(0x06, 0x06, KEY_7)
+			MATRIX_KEY(0x06, 0x08, KEY_0)
+			MATRIX_KEY(0x06, 0x09, KEY_9)
+			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+			MATRIX_KEY(0x07, 0x01, KEY_Q)
+			MATRIX_KEY(0x07, 0x02, KEY_E)
+			MATRIX_KEY(0x07, 0x03, KEY_R)
+			MATRIX_KEY(0x07, 0x04, KEY_W)
+			MATRIX_KEY(0x07, 0x05, KEY_I)
+			MATRIX_KEY(0x07, 0x06, KEY_U)
+			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+			MATRIX_KEY(0x07, 0x08, KEY_P)
+			MATRIX_KEY(0x07, 0x09, KEY_O)
+			MATRIX_KEY(0x07, 0x0b, KEY_UP)
+			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/cros-ec-sbs.dtsi b/roms/u-boot/arch/arm/dts/cros-ec-sbs.dtsi
new file mode 100644
index 000000000..71f5c5ecc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/cros-ec-sbs.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Smart battery dts fragment for devices that use cros-ec-sbs
+ *
+ * Copyright (c) 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c_tunnel {
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0xb>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/da850-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/da850-evm-u-boot.dtsi
new file mode 100644
index 000000000..d58862864
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/da850-evm-u-boot.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * da850-evm U-Boot Additions
+ *
+ * Copyright (C) 2017 Logic PD, Inc.
+ * Copyright (C) Adam Ford
+ */
+
+/ {
+	soc@1c00000 {
+		u-boot,dm-spl;
+	};
+
+	nand {
+		compatible = "ti,davinci-nand";
+	};
+
+	panel {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&eth0 {
+	pinctrl-0 = <&mii_pins>, <&mdio_pins>;
+};
+
+&flash {
+	compatible = "m25p64", "jedec,spi-nor";
+};
+
+&mmc0 {
+	u-boot,dm-spl;
+};
+
+&serial2 {
+	u-boot,dm-spl;
+};
+
+&spi1 {
+	u-boot,dm-spl;
+};
+
+&gpio {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/da850-evm.dts b/roms/u-boot/arch/arm/dts/da850-evm.dts
new file mode 100644
index 000000000..f04bc3e15
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/da850-evm.dts
@@ -0,0 +1,456 @@
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation, version 2.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "ti,da850-evm", "ti,da850";
+	model = "DA850/AM1808/OMAP-L138 EVM";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+		spi0 = &spi1;
+	};
+
+	backlight: backlight-pwm {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+		power-supply = <&backlight_lcd>;
+		compatible = "pwm-backlight";
+		/*
+		 * The PWM here corresponds to production hardware. The
+		 * schematic needs to be 1015171 (15 March 2010), Rev A
+		 * or newer.
+		 */
+		pwms = <&ecap2 0 50000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <7>;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+		/*
+		 * The vpif and the LCD are mutually exclusive.
+		 * To enable VPIF, change the status below to 'disabled' then
+		 * then change the status of the vpif below to 'okay'
+		 */
+		status = "okay";
+		enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <16>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 480x272 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <3>;
+				hback-porch = <2>;
+				hsync-len = <42>;
+				vback-porch = <3>;
+				vfront-porch = <4>;
+				vsync-len = <11>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	baseboard_3v3: fixedregulator-3v3 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	baseboard_1v8: fixedregulator-1v8 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	backlight_lcd: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_backlight_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850-OMAPL138 EVM";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+&ecap2 {
+	status = "okay";
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/*
+			 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+			 * AFSR, AMUTE
+			 */
+			0x00 0x11111111 0xffffffff
+			/* AXR11, AXR12 */
+			0x04 0x00011000 0x000ff000
+		>;
+	};
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+			0x1c 0x10110110  0xf0ff0ff0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	tps: tps@48 {
+		reg = <0x48>;
+	};
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&vdcdc2_reg>;
+		AVDD-supply = <&baseboard_3v3>;
+		DRVDD-supply = <&baseboard_3v3>;
+		DVDD-supply = <&baseboard_1v8>;
+	};
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	tca6416_bb: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&wdt {
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		spi-max-frequency = <30000000>;
+		m25p,fast-read;
+		reg = <0>;
+		partition@0 {
+			label = "U-Boot-SPL";
+			reg = <0x00000000 0x00010000>;
+			read-only;
+		};
+		partition@1 {
+			label = "U-Boot";
+			reg = <0x00010000 0x00080000>;
+			read-only;
+		};
+		partition@2 {
+			label = "U-Boot-Env";
+			reg = <0x00090000 0x00010000>;
+			read-only;
+		};
+		partition@3 {
+			label = "Kernel";
+			reg = <0x000a0000 0x00280000>;
+		};
+		partition@4 {
+			label = "Filesystem";
+			reg = <0x00320000 0x00400000>;
+		};
+		partition@5 {
+			label = "MAC-Address";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+};
+
+&eth0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+};
+
+&gpio {
+	status = "okay";
+};
+
+/include/ "tps6507x.dtsi"
+
+&tps {
+	vdcdc1_2-supply = <&vbat>;
+	vdcdc3-supply = <&vbat>;
+	vldo1_2-supply = <&vbat>;
+
+	regulators {
+		vdcdc1_reg: regulator@0 {
+			regulator-name = "VDCDC1_3.3V";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdcdc2_reg: regulator@1 {
+			regulator-name = "VDCDC2_3.3V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		vdcdc3_reg: regulator@2 {
+			regulator-name = "VDCDC3_1.2V";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "LDO1_1.8V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "LDO2_1.2V";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1320000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 1
+		2 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "ok";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&vpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
+	/*
+	 * The vpif and the LCD are mutually exclusive.
+	 * To enable VPIF, disable the ti,tilcdc,panel then
+	 * change the status below to 'okay'
+	 */
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/da850-lcdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/da850-lcdk-u-boot.dtsi
new file mode 100644
index 000000000..d50775c17
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/da850-lcdk-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * da850-lcdk U-Boot Additions
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		mmc0 = &mmc0;
+		serial2 = &serial2;
+	};
+
+	soc@1c00000 {
+		u-boot,dm-spl;
+	};
+
+	nand {
+		compatible = "ti,davinci-nand";
+	};
+};
+
+&mmc0 {
+	u-boot,dm-spl;
+};
+
+&serial2 {
+	u-boot,dm-spl;
+};
+
+&gpio {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/da850-lcdk.dts b/roms/u-boot/arch/arm/dts/da850-lcdk.dts
new file mode 100644
index 000000000..db8ae566f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/da850-lcdk.dts
@@ -0,0 +1,348 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "DA850/AM1808/OMAP-L138 LCDK";
+	compatible = "ti,da850-lcdk", "ti,da850";
+
+	aliases {
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	memory@c0000000 {
+		/* 128 MB DDR2 SDRAM @ 0xc0000000 */
+		reg = <0xc0000000 0x08000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@c3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xc3000000 0x1000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		user1 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		user2 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vga-bridge {
+		compatible = "ti,ths8135";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&lcdc_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/* AHCLKX AFSX ACLKX */
+			0x00 0x00101010 0x00f0f0f0
+			/* ARX13 ARX14 */
+			0x04 0x00000110 0x00000ff0
+		>;
+	};
+
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
+			0x1c 0x10110010  0xf0ff00f0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/*
+			 * EMA_D[8],  EMA_D[9],  EMA_D[10],
+			 * EMA_D[11], EMA_D[12], EMA_D[13],
+			 * EMA_D[14], EMA_D[15]
+			 */
+			0x20 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&sata_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+
+	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+		0 1 2 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "okay";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+
+			ti,davinci-nand-buswidth = <16>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+
+			/*
+			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
+			 * "To boot from NAND Flash, the AIS should be written
+			 * to NAND block 1 (NAND block 0 is not used by default)".
+			 * The same doc mentions that for ROM "Silicon Revision 2.1",
+			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
+			 * However the limitaion is left here by default for compatibility
+			 * with older silicon and because it needs new boot pin settings
+			 * not possible in stock LCDK.
+			 */
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "u-boot env";
+					reg = <0 0x020000>;
+				};
+				partition@20000 {
+					/* The LCDK defaults to booting from this partition */
+					label = "u-boot";
+					reg = <0x020000 0x080000>;
+				};
+				partition@a0000 {
+					label = "free space";
+					reg = <0x0a0000 0>;
+				};
+			};
+		};
+	};
+};
+
+&prictrl {
+	status = "okay";
+};
+
+&memctrl {
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	port {
+		lcdc_out_vga: endpoint {
+			remote-endpoint = <&vga_bridge_in>;
+		};
+	};
+};
+
+&vpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vpif_capture_pins>;
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_memory_region>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/da850-lego-ev3.dts b/roms/u-boot/arch/arm/dts/da850-lego-ev3.dts
new file mode 100644
index 000000000..e281d039f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/da850-lego-ev3.dts
@@ -0,0 +1,89 @@
+/*
+ * Device tree for LEGO MINDSTORMS EV3
+ *
+ * Copyright (C) 2017 David Lechner <david@lechnology.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * This is an absolute minimum device tree instead of using the one from Linux
+ * because the bootloader on the EV3 is limited to 256k. This saves us >10k.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lego,ev3", "ti,da850";
+	model = "LEGO MINDSTORMS EV3";
+
+	aliases {
+		serial1 = &serial1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = &serial1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xc0000000 0x04000000>;
+	};
+
+	arm {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		intc: interrupt-controller@fffee000 {
+			compatible = "ti,cp-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,intc-size = <101>;
+			reg = <0xfffee000 0x2000>;
+		};
+	};
+
+	soc@1c00000 {
+		compatible = "simple-bus";
+		model = "da850";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x01c00000 0x400000>;
+		interrupt-parent = <&intc>;
+
+		mmc0: mmc@40000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x40000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			interrupts = <16>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+		};
+
+		spi0: spi@41000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x41000 0x1000>;
+			num-cs = <6>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <20>;
+
+			flash@0 {
+				compatible = "micron,n25q128a13", "jedec,spi-nor", "spi-flash";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+			};
+		};
+
+		serial1: serial@10c000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			reg = <0x10c000 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <53>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/da850.dtsi b/roms/u-boot/arch/arm/dts/da850.dtsi
new file mode 100644
index 000000000..559659b39
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/da850.dtsi
@@ -0,0 +1,921 @@
+/*
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x0>;
+	};
+
+	arm {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		intc: interrupt-controller@fffee000 {
+			compatible = "ti,cp-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,intc-size = <101>;
+			reg = <0xfffee000 0x2000>;
+		};
+	};
+	clocks: clocks {
+		ref_clk: ref_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "ref_clk";
+		};
+		sata_refclk: sata_refclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "sata_refclk";
+			status = "disabled";
+		};
+		usb_refclkin: usb_refclkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "usb_refclkin";
+			status = "disabled";
+		};
+	};
+	dsp: dsp@11800000 {
+		compatible = "ti,da850-dsp";
+		reg = <0x11800000 0x40000>,
+		      <0x11e00000 0x8000>,
+		      <0x11f00000 0x8000>,
+		      <0x01c14044 0x4>,
+		      <0x01c14174 0x8>;
+		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
+		interrupt-parent = <&intc>;
+		interrupts = <28>;
+		clocks = <&psc0 15>;
+		resets = <&psc0 15>;
+		status = "disabled";
+	};
+	soc@1c00000 {
+		compatible = "simple-bus";
+		model = "da850";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x01c00000 0x400000>;
+		interrupt-parent = <&intc>;
+
+		psc0: clock-controller@10000 {
+			compatible = "ti,da850-psc0";
+			reg = <0x10000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+				 <&pll0_sysclk 4>, <&pll0_sysclk 6>,
+				 <&async1_clk>;
+			clock-names = "pll0_sysclk1", "pll0_sysclk2",
+				      "pll0_sysclk4", "pll0_sysclk6",
+				      "async1";
+		};
+		pll0: clock-controller@11000 {
+			compatible = "ti,da850-pll0";
+			reg = <0x11000 0x1000>;
+			clocks = <&ref_clk>, <&pll1_sysclk 3>;
+			clock-names = "clksrc", "extclksrc";
+
+			pll0_pllout: pllout {
+				#clock-cells = <0>;
+			};
+			pll0_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll0_auxclk: auxclk {
+				#clock-cells = <0>;
+			};
+			pll0_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
+		pmx_core: pinmux@14120 {
+			compatible = "pinctrl-single";
+			reg = <0x14120 0x50>;
+			#pinctrl-cells = <2>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xf>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range   0 17 0x8>,
+						    <&range  17  8 0x4>,
+						    <&range  26  8 0x4>,
+						    <&range  34 80 0x8>,
+						    <&range 129 31 0x8>;
+			status = "disabled";
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+
+			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART0_RTS UART0_CTS */
+					0x0c 0x22000000 0xff000000
+				>;
+			};
+			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART0_TXD UART0_RXD */
+					0x0c 0x00220000 0x00ff0000
+				>;
+			};
+			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART1_CTS UART1_RTS */
+					0x00 0x00440000 0x00ff0000
+				>;
+			};
+			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART1_TXD UART1_RXD */
+					0x10 0x22000000 0xff000000
+				>;
+			};
+			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART2_CTS UART2_RTS */
+					0x00 0x44000000 0xff000000
+				>;
+			};
+			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART2_TXD UART2_RXD */
+					0x10 0x00220000 0x00ff0000
+				>;
+			};
+			i2c0_pins: pinmux_i2c0_pins {
+				pinctrl-single,bits = <
+					/* I2C0_SDA,I2C0_SCL */
+					0x10 0x00002200 0x0000ff00
+				>;
+			};
+			i2c1_pins: pinmux_i2c1_pins {
+				pinctrl-single,bits = <
+					/* I2C1_SDA, I2C1_SCL */
+					0x10 0x00440000 0x00ff0000
+				>;
+			};
+			mmc0_pins: pinmux_mmc_pins {
+				pinctrl-single,bits = <
+					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
+					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
+					 * MMCSD0_CMD    MMCSD0_CLK
+					 */
+					0x28 0x00222222  0x00ffffff
+				>;
+			};
+			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
+				pinctrl-single,bits = <
+					/* EPWM0A */
+					0xc 0x00000002 0x0000000f
+				>;
+			};
+			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
+				pinctrl-single,bits = <
+					/* EPWM0B */
+					0xc 0x00000020 0x000000f0
+				>;
+			};
+			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
+				pinctrl-single,bits = <
+					/* EPWM1A */
+					0x14 0x00000002 0x0000000f
+				>;
+			};
+			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
+				pinctrl-single,bits = <
+					/* EPWM1B */
+					0x14 0x00000020 0x000000f0
+				>;
+			};
+			ecap0_pins: pinmux_ecap0_pins {
+				pinctrl-single,bits = <
+					/* ECAP0_APWM0 */
+					0x8 0x20000000 0xf0000000
+				>;
+			};
+			ecap1_pins: pinmux_ecap1_pins {
+				pinctrl-single,bits = <
+					/* ECAP1_APWM1 */
+					0x4 0x40000000 0xf0000000
+				>;
+			};
+			ecap2_pins: pinmux_ecap2_pins {
+				pinctrl-single,bits = <
+					/* ECAP2_APWM2 */
+					0x4 0x00000004 0x0000000f
+				>;
+			};
+			spi0_pins: pinmux_spi0_pins {
+				pinctrl-single,bits = <
+					/* SIMO, SOMI, CLK */
+					0xc 0x00001101 0x0000ff0f
+				>;
+			};
+			spi0_cs0_pin: pinmux_spi0_cs0 {
+				pinctrl-single,bits = <
+					/* CS0 */
+					0x10 0x00000010 0x000000f0
+				>;
+			};
+			spi0_cs3_pin: pinmux_spi0_cs3_pin {
+				pinctrl-single,bits = <
+					/* CS3 */
+					0xc 0x01000000 0x0f000000
+				>;
+			};
+			spi1_pins: pinmux_spi1_pins {
+				pinctrl-single,bits = <
+					/* SIMO, SOMI, CLK */
+					0x14 0x00110100 0x00ff0f00
+				>;
+			};
+			spi1_cs0_pin: pinmux_spi1_cs0 {
+				pinctrl-single,bits = <
+					/* CS0 */
+					0x14 0x00000010 0x000000f0
+				>;
+			};
+			mdio_pins: pinmux_mdio_pins {
+				pinctrl-single,bits = <
+					/* MDIO_CLK, MDIO_D */
+					0x10 0x00000088 0x000000ff
+				>;
+			};
+			mii_pins: pinmux_mii_pins {
+				pinctrl-single,bits = <
+					/*
+					 * MII_TXEN, MII_TXCLK, MII_COL
+					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
+					 * MII_TXD_0
+					 */
+					0x8 0x88888880 0xfffffff0
+					/*
+					 * MII_RXER, MII_CRS, MII_RXCLK
+					 * MII_RXDV, MII_RXD_3, MII_RXD_2
+					 * MII_RXD_1, MII_RXD_0
+					 */
+					0xc 0x88888888 0xffffffff
+				>;
+			};
+			lcd_pins: pinmux_lcd_pins {
+				pinctrl-single,bits = <
+					/*
+					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
+					 * LCD_D[6], LCD_D[7]
+					 */
+					0x40 0x22222200 0xffffff00
+					/*
+					 * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
+					 * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
+					 */
+					0x44 0x22222222 0xffffffff
+					/* LCD_D[8], LCD_D[9] */
+					0x48 0x00000022 0x000000ff
+
+					/* LCD_PCLK */
+					0x48 0x02000000 0x0f000000
+					/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
+					0x4c 0x02000022 0x0f0000ff
+				>;
+			};
+			vpif_capture_pins: vpif_capture_pins {
+				pinctrl-single,bits = <
+					/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
+					0x38 0x11111111 0xffffffff
+					/* VP_DIN[10..15,0..1] */
+					0x3c 0x11111111 0xffffffff
+					/* VP_DIN[8..9] */
+					0x40 0x00000011 0x000000ff
+				>;
+			};
+			vpif_display_pins: vpif_display_pins {
+				pinctrl-single,bits = <
+					/* VP_DOUT[2..7] */
+					0x40 0x11111100 0xffffff00
+					/* VP_DOUT[10..15,0..1] */
+					0x44 0x11111111 0xffffffff
+					/*  VP_DOUT[8..9] */
+					0x48 0x00000011 0x000000ff
+					/*
+					 * VP_CLKOUT3, VP_CLKIN3,
+					 * VP_CLKOUT2, VP_CLKIN2
+					 */
+					0x4c 0x00111100 0x00ffff00
+				>;
+			};
+		};
+		prictrl: priority-controller@14110 {
+			compatible = "ti,da850-mstpri";
+			reg = <0x14110 0x0c>;
+			status = "disabled";
+		};
+		cfgchip: chip-controller@1417c {
+			compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+			reg = <0x1417c 0x14>;
+
+			usb_phy: usb-phy {
+				compatible = "ti,da830-usb-phy";
+				#phy-cells = <1>;
+				clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+				clock-names = "usb0_clk48", "usb1_clk48";
+				status = "disabled";
+			};
+			usb_phy_clk: usb-phy-clocks {
+				compatible = "ti,da830-usb-phy-clocks";
+				#clock-cells = <1>;
+				clocks = <&psc1 1>, <&usb_refclkin>,
+					 <&pll0_auxclk>;
+				clock-names = "fck", "usb_refclkin", "auxclk";
+			};
+			ehrpwm_tbclk: ehrpwm_tbclk {
+				compatible = "ti,da830-tbclksync";
+				#clock-cells = <0>;
+				clocks = <&psc1 17>;
+				clock-names = "fck";
+			};
+			div4p5_clk: div4.5 {
+				compatible = "ti,da830-div4p5ena";
+				#clock-cells = <0>;
+				clocks = <&pll0_pllout>;
+				clock-names = "pll0_pllout";
+			};
+			async1_clk: async1 {
+				compatible = "ti,da850-async1-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+				clock-names = "pll0_sysclk3", "div4.5";
+			};
+			async3_clk: async3 {
+				compatible = "ti,da850-async3-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+				clock-names = "pll0_sysclk2", "pll1_sysclk2";
+			};
+		};
+		edma0: edma@0 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
+			reg =	<0x0 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <11 12>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+			power-domains = <&psc0 0>;
+		};
+		edma0_tptc0: tptc@8000 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x8000 0x400>;
+			interrupts = <13>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 1>;
+		};
+		edma0_tptc1: tptc@8400 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x8400 0x400>;
+			interrupts = <32>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 2>;
+		};
+		edma1: edma@230000 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
+			reg =	<0x230000 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <93 94>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma1_tptc0 7>;
+			power-domains = <&psc1 0>;
+		};
+		edma1_tptc0: tptc@238000 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x238000 0x400>;
+			interrupts = <95>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc1 21>;
+		};
+		serial0: serial@42000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			reg = <0x42000 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			clocks = <&psc0 9>;
+			power-domains = <&psc0 9>;
+			status = "disabled";
+		};
+		serial1: serial@10c000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			reg = <0x10c000 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <53>;
+			clocks = <&psc1 12>;
+			power-domains = <&psc1 12>;
+			status = "disabled";
+		};
+		serial2: serial@10d000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			reg = <0x10d000 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <61>;
+			clocks = <&psc1 13>;
+			power-domains = <&psc1 13>;
+			status = "disabled";
+		};
+		rtc0: rtc@23000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x23000 0x1000>;
+			interrupts = <19
+				      19>;
+			clocks = <&pll0_auxclk>;
+			clock-names = "int-clk";
+			status = "disabled";
+		};
+		i2c0: i2c@22000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x22000 0x1000>;
+			interrupts = <15>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pll0_auxclk>;
+			status = "disabled";
+		};
+		i2c1: i2c@228000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x228000 0x1000>;
+			interrupts = <51>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&psc1 11>;
+			power-domains = <&psc1 11>;
+			status = "disabled";
+		};
+		clocksource: timer@20000 {
+			compatible = "ti,da830-timer";
+			reg = <0x20000 0x1000>;
+			interrupts = <21>, <22>;
+			interrupt-names = "tint12", "tint34";
+			clocks = <&pll0_auxclk>;
+		};
+		wdt: wdt@21000 {
+			compatible = "ti,davinci-wdt";
+			reg = <0x21000 0x1000>;
+			clocks = <&pll0_auxclk>;
+			status = "disabled";
+		};
+		mmc0: mmc@40000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x40000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			interrupts = <16>;
+			dmas = <&edma0 16 0>, <&edma0 17 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc0 5>;
+			status = "disabled";
+		};
+		vpif: video@217000 {
+			compatible = "ti,da850-vpif";
+			reg = <0x217000 0x1000>;
+			interrupts = <92>;
+			power-domains = <&psc1 9>;
+			status = "disabled";
+
+			/* VPIF capture port */
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			/* VPIF display port */
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+		mmc1: mmc@21b000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x21b000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			interrupts = <72>;
+			dmas = <&edma1 28 0>, <&edma1 29 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc1 18>;
+			status = "disabled";
+		};
+		ehrpwm0: pwm@300000 {
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
+			#pwm-cells = <3>;
+			reg = <0x300000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
+			status = "disabled";
+		};
+		ehrpwm1: pwm@302000 {
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
+			#pwm-cells = <3>;
+			reg = <0x302000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
+			status = "disabled";
+		};
+		ecap0: ecap@306000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x306000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
+			status = "disabled";
+		};
+		ecap1: ecap@307000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x307000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
+			status = "disabled";
+		};
+		ecap2: ecap@308000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x308000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
+			status = "disabled";
+		};
+		spi0: spi@41000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x41000 0x1000>;
+			num-cs = <6>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <20>;
+			dmas = <&edma0 14 0>, <&edma0 15 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc0 4>;
+			power-domains = <&psc0 4>;
+			status = "disabled";
+		};
+		spi1: spi@30e000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x30e000 0x1000>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <56>;
+			dmas = <&edma0 18 0>, <&edma0 19 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc1 10>;
+			power-domains = <&psc1 10>;
+			status = "disabled";
+		};
+		usb0: usb@200000 {
+			compatible = "ti,da830-musb";
+			reg = <0x200000 0x1000>;
+			ranges;
+			interrupts = <58>;
+			interrupt-names = "mc";
+			dr_mode = "otg";
+			phys = <&usb_phy 0>;
+			phy-names = "usb-phy";
+			clocks = <&psc1 1>;
+			clock-ranges;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+				&cppi41dma 2 0 &cppi41dma 3 0
+				&cppi41dma 0 1 &cppi41dma 1 1
+				&cppi41dma 2 1 &cppi41dma 3 1>;
+			dma-names =
+				"rx1", "rx2", "rx3", "rx4",
+				"tx1", "tx2", "tx3", "tx4";
+
+			cppi41dma: dma-controller@201000 {
+				compatible = "ti,da830-cppi41";
+				reg =  <0x201000 0x1000
+					0x202000 0x1000
+					0x204000 0x4000>;
+				reg-names = "controller",
+					    "scheduler", "queuemgr";
+				interrupts = <58>;
+				#dma-cells = <2>;
+				#dma-channels = <4>;
+				power-domains = <&psc1 1>;
+				status = "okay";
+			};
+		};
+		sata: sata@218000 {
+			compatible = "ti,da850-ahci";
+			reg = <0x218000 0x2000>, <0x22c018 0x4>;
+			interrupts = <67>;
+			clocks = <&psc1 8>, <&sata_refclk>;
+			clock-names = "fck", "refclk";
+			status = "disabled";
+		};
+		pll1: clock-controller@21a000 {
+			compatible = "ti,da850-pll1";
+			reg = <0x21a000 0x1000>;
+			clocks = <&ref_clk>;
+			clock-names = "clksrc";
+
+			pll1_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll1_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
+		mdio: mdio@224000 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x224000 0x1000>;
+			clocks = <&psc1 5>;
+			clock-names = "fck";
+			power-domains = <&psc1 5>;
+			status = "disabled";
+		};
+		eth0: ethernet@220000 {
+			compatible = "ti,davinci-dm6467-emac";
+			reg = <0x220000 0x4000>;
+			ti,davinci-ctrl-reg-offset = <0x3000>;
+			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+			ti,davinci-ctrl-ram-offset = <0>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <33
+					34
+					35
+					36
+					>;
+			clocks = <&psc1 5>;
+			power-domains = <&psc1 5>;
+			status = "disabled";
+		};
+		usb1: usb@225000 {
+			compatible = "ti,da830-ohci";
+			reg = <0x225000 0x1000>;
+			interrupts = <59>;
+			phys = <&usb_phy 1>;
+			phy-names = "usb-phy";
+			clocks = <&psc1 2>;
+			status = "disabled";
+		};
+		gpio: gpio@226000 {
+			compatible = "ti,dm6441-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x226000 0x1000>;
+			interrupts = <42 43 44 45 46 47 48 49 50>;
+			ti,ngpio = <144>;
+			ti,davinci-gpio-unbanked = <0>;
+			clocks = <&psc1 3>;
+			clock-names = "gpio";
+			status = "disabled";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx_core   0  15 1>,
+				      <&pmx_core   1  14 1>,
+				      <&pmx_core   2  13 1>,
+				      <&pmx_core   3  12 1>,
+				      <&pmx_core   4  11 1>,
+				      <&pmx_core   5  10 1>,
+				      <&pmx_core   6   9 1>,
+				      <&pmx_core   7   8 1>,
+				      <&pmx_core   8   7 1>,
+				      <&pmx_core   9   6 1>,
+				      <&pmx_core  10   5 1>,
+				      <&pmx_core  11   4 1>,
+				      <&pmx_core  12   3 1>,
+				      <&pmx_core  13   2 1>,
+				      <&pmx_core  14   1 1>,
+				      <&pmx_core  15   0 1>,
+				      <&pmx_core  16  39 1>,
+				      <&pmx_core  17  38 1>,
+				      <&pmx_core  18  37 1>,
+				      <&pmx_core  19  36 1>,
+				      <&pmx_core  20  35 1>,
+				      <&pmx_core  21  34 1>,
+				      <&pmx_core  22  33 1>,
+				      <&pmx_core  23  32 1>,
+				      <&pmx_core  24  24 1>,
+				      <&pmx_core  25  22 1>,
+				      <&pmx_core  26  21 1>,
+				      <&pmx_core  27  20 1>,
+				      <&pmx_core  28  19 1>,
+				      <&pmx_core  29  18 1>,
+				      <&pmx_core  30  17 1>,
+				      <&pmx_core  31  16 1>,
+				      <&pmx_core  32  55 1>,
+				      <&pmx_core  33  54 1>,
+				      <&pmx_core  34  53 1>,
+				      <&pmx_core  35  52 1>,
+				      <&pmx_core  36  51 1>,
+				      <&pmx_core  37  50 1>,
+				      <&pmx_core  38  49 1>,
+				      <&pmx_core  39  48 1>,
+				      <&pmx_core  40  47 1>,
+				      <&pmx_core  41  46 1>,
+				      <&pmx_core  42  45 1>,
+				      <&pmx_core  43  44 1>,
+				      <&pmx_core  44  43 1>,
+				      <&pmx_core  45  42 1>,
+				      <&pmx_core  46  41 1>,
+				      <&pmx_core  47  40 1>,
+				      <&pmx_core  48  71 1>,
+				      <&pmx_core  49  70 1>,
+				      <&pmx_core  50  69 1>,
+				      <&pmx_core  51  68 1>,
+				      <&pmx_core  52  67 1>,
+				      <&pmx_core  53  66 1>,
+				      <&pmx_core  54  65 1>,
+				      <&pmx_core  55  64 1>,
+				      <&pmx_core  56  63 1>,
+				      <&pmx_core  57  62 1>,
+				      <&pmx_core  58  61 1>,
+				      <&pmx_core  59  60 1>,
+				      <&pmx_core  60  59 1>,
+				      <&pmx_core  61  58 1>,
+				      <&pmx_core  62  57 1>,
+				      <&pmx_core  63  56 1>,
+				      <&pmx_core  64  87 1>,
+				      <&pmx_core  65  86 1>,
+				      <&pmx_core  66  85 1>,
+				      <&pmx_core  67  84 1>,
+				      <&pmx_core  68  83 1>,
+				      <&pmx_core  69  82 1>,
+				      <&pmx_core  70  81 1>,
+				      <&pmx_core  71  80 1>,
+				      <&pmx_core  72  70 1>,
+				      <&pmx_core  73  78 1>,
+				      <&pmx_core  74  77 1>,
+				      <&pmx_core  75  76 1>,
+				      <&pmx_core  76  75 1>,
+				      <&pmx_core  77  74 1>,
+				      <&pmx_core  78  73 1>,
+				      <&pmx_core  79  72 1>,
+				      <&pmx_core  80 103 1>,
+				      <&pmx_core  81 102 1>,
+				      <&pmx_core  82 101 1>,
+				      <&pmx_core  83 100 1>,
+				      <&pmx_core  84  99 1>,
+				      <&pmx_core  85  98 1>,
+				      <&pmx_core  86  97 1>,
+				      <&pmx_core  87  96 1>,
+				      <&pmx_core  88  95 1>,
+				      <&pmx_core  89  94 1>,
+				      <&pmx_core  90  93 1>,
+				      <&pmx_core  91  92 1>,
+				      <&pmx_core  92  91 1>,
+				      <&pmx_core  93  90 1>,
+				      <&pmx_core  94  89 1>,
+				      <&pmx_core  95  88 1>,
+				      <&pmx_core  96 158 1>,
+				      <&pmx_core  97 157 1>,
+				      <&pmx_core  98 156 1>,
+				      <&pmx_core  99 155 1>,
+				      <&pmx_core 100 154 1>,
+				      <&pmx_core 101 129 1>,
+				      <&pmx_core 102 113 1>,
+				      <&pmx_core 103 112 1>,
+				      <&pmx_core 104 111 1>,
+				      <&pmx_core 105 110 1>,
+				      <&pmx_core 106 109 1>,
+				      <&pmx_core 107 108 1>,
+				      <&pmx_core 108 107 1>,
+				      <&pmx_core 109 106 1>,
+				      <&pmx_core 110 105 1>,
+				      <&pmx_core 111 104 1>,
+				      <&pmx_core 112 145 1>,
+				      <&pmx_core 113 144 1>,
+				      <&pmx_core 114 143 1>,
+				      <&pmx_core 115 142 1>,
+				      <&pmx_core 116 141 1>,
+				      <&pmx_core 117 140 1>,
+				      <&pmx_core 118 139 1>,
+				      <&pmx_core 119 138 1>,
+				      <&pmx_core 120 137 1>,
+				      <&pmx_core 121 136 1>,
+				      <&pmx_core 122 135 1>,
+				      <&pmx_core 123 134 1>,
+				      <&pmx_core 124 133 1>,
+				      <&pmx_core 125 132 1>,
+				      <&pmx_core 126 131 1>,
+				      <&pmx_core 127 130 1>,
+				      <&pmx_core 128 159 1>,
+				      <&pmx_core 129  31 1>,
+				      <&pmx_core 130  30 1>,
+				      <&pmx_core 131  20 1>,
+				      <&pmx_core 132  28 1>,
+				      <&pmx_core 133  27 1>,
+				      <&pmx_core 134  26 1>,
+				      <&pmx_core 135  23 1>,
+				      <&pmx_core 136 153 1>,
+				      <&pmx_core 137 152 1>,
+				      <&pmx_core 138 151 1>,
+				      <&pmx_core 139 150 1>,
+				      <&pmx_core 140 149 1>,
+				      <&pmx_core 141 148 1>,
+				      <&pmx_core 142 147 1>,
+				      <&pmx_core 143 146 1>;
+		};
+		psc1: clock-controller@227000 {
+			compatible = "ti,da850-psc1";
+			reg = <0x227000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
+				 <&async3_clk>;
+			clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+			assigned-clocks = <&async3_clk>;
+			assigned-clock-parents = <&pll1_sysclk 2>;
+		};
+		pinconf: pin-controller@22c00c {
+			compatible = "ti,da850-pupd";
+			reg = <0x22c00c 0x8>;
+			status = "disabled";
+		};
+
+		mcasp0: mcasp@100000 {
+			compatible = "ti,da830-mcasp-audio";
+			reg = <0x100000 0x2000>,
+			      <0x102000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <54>;
+			interrupt-names = "common";
+			power-domains = <&psc1 7>;
+			status = "disabled";
+			dmas = <&edma0 1 1>,
+				<&edma0 0 1>;
+			dma-names = "tx", "rx";
+		};
+
+		lcdc: display@213000 {
+			compatible = "ti,da850-tilcdc";
+			reg = <0x213000 0x1000>;
+			interrupts = <52>;
+			max-pixelclock = <37500>;
+			clocks = <&psc1 16>;
+			clock-names = "fck";
+			power-domains = <&psc1 16>;
+			status = "disabled";
+		};
+	};
+	aemif: aemif@68000000 {
+		compatible = "ti,da850-aemif";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		reg = <0x68000000 0x00008000>;
+		ranges = <0 0 0x60000000 0x08000000
+			  1 0 0x68000000 0x00008000>;
+		clocks = <&psc0 3>;
+		clock-names = "aemif";
+		clock-ranges;
+		status = "disabled";
+	};
+	memctrl: memory-controller@b0000000 {
+		compatible = "ti,da850-ddr-controller";
+		reg = <0xb0000000 0xe8>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dm8168-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/dm8168-evm-u-boot.dtsi
new file mode 100644
index 000000000..de0bb9bc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dm8168-evm-u-boot.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dm8168-evm U-Boot Additions
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+/ {
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dm8168-evm.dts b/roms/u-boot/arch/arm/dts/dm8168-evm.dts
new file mode 100644
index 000000000..0bf55fa72
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dm8168-evm.dts
@@ -0,0 +1,175 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm816x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DM8168 EVM";
+	compatible = "ti,dm8168-evm", "ti,dm8168";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000	/* 1 GB */
+		       0xc0000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* FDC6331L controlled by SD_POW pin */
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dm816x_pinmux {
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a94, MUX_MODE0)			/* SPI_SCLK */
+			DM816X_IOPAD(0x0a98, MUX_MODE0)			/* SPI_SCS0 */
+			DM816X_IOPAD(0x0aa8, MUX_MODE0)			/* SPI_D0 */
+			DM816X_IOPAD(0x0aac, MUX_MODE0)			/* SPI_D1 */
+		>;
+	};
+
+	mmc_pins: pinmux_mmc_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
+			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
+			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */
+			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */
+			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */
+			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */
+			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */
+		>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB0_DRVVBUS */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
+		>;
+	};
+};
+
+&i2c1 {
+	extgpio0: pcf8575@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c2 {
+	extgpio1: pcf8575@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	m25p80@0 {
+		compatible = "w25x32";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+/* At least dm8168-evm rev c won't support multipoint, later may */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	mentor,multipoint = <0>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	mentor,multipoint = <0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/dm816x-clocks.dtsi b/roms/u-boot/arch/arm/dts/dm816x-clocks.dtsi
new file mode 100644
index 000000000..51865eb84
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dm816x-clocks.dtsi
@@ -0,0 +1,250 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scrm {
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};
+
+	ddr_fapll: ddr_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x440 0x30>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>;
+		clock-output-names = "ddr_pll_clk1",
+				     "ddr_pll_clk2",
+				     "ddr_pll_clk3",
+				     "ddr_pll_clk4";
+	};
+
+	video_fapll: video_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x470 0x30>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>;
+		clock-output-names = "video_pll_clk1",
+				     "video_pll_clk2",
+				     "video_pll_clk3";
+	};
+
+	audio_fapll: audio_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x4a0 0x30>;
+		clocks = <&main_fapll 7>, < &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>;
+		clock-output-names = "audio_pll_clk1",
+				     "audio_pll_clk2",
+				     "audio_pll_clk3",
+				     "audio_pll_clk4",
+				     "audio_pll_clk5";
+	};
+};
+
+&scrm_clocks {
+	secure_32k_ck: secure_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+};
+
+/* 0x48180000 */
+&prcm_clocks {
+	clkout_pre_ck: clkout_pre_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
+			  &audio_fapll 1>;
+		reg = <0x100>;
+	};
+
+	clkout_div_ck: clkout_div_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x100>;
+	};
+
+	clkout_ck: clkout_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x100>;
+	};
+
+	/* CM_DPLL clocks p1795 */
+	sysclk1_ck: sysclk1_ck@300 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 1>;
+		ti,max-div = <7>;
+		reg = <0x0300>;
+	};
+
+	sysclk2_ck: sysclk2_ck@304 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 2>;
+		ti,max-div = <7>;
+		reg = <0x0304>;
+	};
+
+	sysclk3_ck: sysclk3_ck@308 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 3>;
+		ti,max-div = <7>;
+		reg = <0x0308>;
+	};
+
+	sysclk4_ck: sysclk4_ck@30c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 4>;
+		ti,max-div = <1>;
+		reg = <0x030c>;
+	};
+
+	sysclk5_ck: sysclk5_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclk4_ck>;
+		ti,max-div = <1>;
+		reg = <0x0310>;
+	};
+
+	sysclk6_ck: sysclk6_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 4>;
+		ti,dividers = <2>, <4>;
+		reg = <0x0314>;
+	};
+
+	sysclk10_ck: sysclk10_ck@324 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&ddr_fapll 2>;
+		ti,max-div = <7>;
+		reg = <0x0324>;
+	};
+
+	sysclk24_ck: sysclk24_ck@3b4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 5>;
+		ti,max-div = <7>;
+		reg = <0x03b4>;
+	};
+
+	mpu_ck: mpu_ck@15dc {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sysclk2_ck>;
+		ti,bit-shift = <1>;
+                reg = <0x15dc>;
+	};
+
+	audio_pll_a_ck: audio_pll_a_ck@35c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&audio_fapll 1>;
+		ti,max-div = <7>;
+		reg = <0x035c>;
+	};
+
+	sysclk18_ck: sysclk18_ck@378 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
+		reg = <0x0378>;
+	};
+
+	timer1_fck: timer1_fck@390 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0390>;
+	};
+
+	timer2_fck: timer2_fck@394 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0394>;
+	};
+
+	timer3_fck: timer3_fck@398 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0398>;
+	};
+
+	timer4_fck: timer4_fck@39c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x039c>;
+	};
+
+	timer5_fck: timer5_fck@3a0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a0>;
+	};
+
+	timer6_fck: timer6_fck@3a4 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a4>;
+	};
+
+	timer7_fck: timer7_fck@3a8 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a8>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dm816x.dtsi b/roms/u-boot/arch/arm/dts/dm816x.dtsi
new file mode 100644
index 000000000..fe58faf2f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dm816x.dtsi
@@ -0,0 +1,514 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+	compatible = "ti,dm816";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the dm816x interconnect.
+	 * The real dm816x interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp {
+		compatible = "simple-bus";
+		reg = <0x44000000 0x10000>;
+		interrupts = <9 10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		prcm: prcm@48180000 {
+			compatible = "ti,dm816-prcm";
+			reg = <0x48180000 0x4000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@48140000 {
+			compatible = "ti,dm816-scrm", "simple-bus";
+			reg = <0x48140000 0x21000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#pinctrl-cells = <1>;
+			ranges = <0 0x48140000 0x21000>;
+
+			dm816x_pinmux: pinmux@800 {
+				compatible = "pinctrl-single";
+				reg = <0x800 0x50a>;
+				#pinctrl-cells = <1>;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xf>;
+			};
+
+			/* Device Configuration Registers */
+			scm_conf: syscon@600 {
+				compatible = "syscon", "simple-bus";
+				reg = <0x600 0x110>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x600 0x110>;
+
+				usb_phy0: usb-phy@20 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x20 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
+
+				usb_phy1: usb-phy@28 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x28 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
+			};
+
+			scrm_clocks: clocks {
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
+			reg =   <0x49000000 0x10000>,
+			        <0x44e10f90 0x40>;
+			interrupts = <12 13 14>;
+			#dma-cells = <1>;
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,816-elm";
+			ti,hwmods = "elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <4>;
+		};
+
+		gpio1: gpio@48032000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			reg = <0x48032000 0x1000>;
+			interrupts = <96>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@4804c000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
+			reg = <0x4804c000 0x1000>;
+			interrupts = <98>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <100>;
+			dmas = <&edma 52>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <6>;
+			gpmc,num-waitpins = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		i2c1: i2c@48028000 {
+			compatible = "ti,omap4-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <70>;
+			dmas = <&edma 58 &edma 59>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@4802a000 {
+			compatible = "ti,omap4-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <71>;
+			dmas = <&edma 60 &edma 61>;
+			dma-names = "tx", "rx";
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,dm816-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		rtc: rtc@480c0000 {
+			compatible = "ti,am3352-rtc", "ti,da830-rtc";
+			reg = <0x480c0000 0x1000>;
+			interrupts = <75 76>;
+			ti,hwmods = "rtc";
+		};
+
+		mailbox: mailbox@480c8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480c8000 0x2000>;
+			interrupts = <77>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			mbox_dsp: mbox_dsp {
+				ti,mbox-tx = <3 0 0>;
+				ti,mbox-rx = <0 0 0>;
+			};
+		};
+
+		spinbox: spinbox@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x2000>;
+			ti,hwmods = "spinbox";
+			#hwlock-cells = <1>;
+		};
+
+		mdio: mdio@4a100800 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a100800 0x100>;
+			ti,hwmods = "davinci_mdio";
+			bus_freq = <1000000>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <2>;
+			};
+		};
+
+		eth0: ethernet@4a100000 {
+			compatible = "ti,dm816-emac";
+			ti,hwmods = "emac0";
+			reg = <0x4a100000 0x800
+			       0x4a100900 0x3700>;
+			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0>;
+			ti,davinci-ctrl-mod-reg-offset = <0x900>;
+			ti,davinci-ctrl-ram-offset = <0x2000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			interrupts = <40 41 42 43>;
+			phy-handle = <&phy0>;
+		};
+
+		eth1: ethernet@4a120000 {
+			compatible = "ti,dm816-emac";
+			ti,hwmods = "emac1";
+			reg = <0x4a120000 0x4000>;
+			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0>;
+			ti,davinci-ctrl-mod-reg-offset = <0x900>;
+			ti,davinci-ctrl-ram-offset = <0x2000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			interrupts = <44 45 46 47>;
+			phy-handle = <&phy1>;
+		};
+
+		mcspi1: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48030000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <65>;
+			ti,spi-num-cs = <4>;
+			ti,hwmods = "mcspi1";
+			dmas = <&edma 16 &edma 17
+				&edma 18 &edma 19
+				&edma 20 &edma 21
+				&edma 22 &edma 23>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x11000>;
+			ti,hwmods = "mmc1";
+			interrupts = <64>;
+			dmas = <&edma 24 &edma 25>;
+			dma-names = "tx", "rx";
+		};
+
+		timer1: timer@4802e000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x4802e000 0x2000>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48040000 0x2000>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48042000 0x2000>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48044000 0x2000>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+			ti,timer-pwm;
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48046000 0x2000>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+			ti,timer-pwm;
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48048000 0x2000>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x4804a000 0x2000>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+			ti,timer-pwm;
+		};
+
+		uart1: uart@48020000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
+			ti,hwmods = "uart1";
+			reg = <0x48020000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <72>;
+			dmas = <&edma 26 &edma 27>;
+			dma-names = "tx", "rx";
+		};
+
+		uart2: uart@48022000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
+			ti,hwmods = "uart2";
+			reg = <0x48022000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <73>;
+			dmas = <&edma 28 &edma 29>;
+			dma-names = "tx", "rx";
+		};
+
+		uart3: uart@48024000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
+			ti,hwmods = "uart3";
+			reg = <0x48024000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <74>;
+			dmas = <&edma 30 &edma 31>;
+			dma-names = "tx", "rx";
+		};
+
+		/* NOTE: USB needs a transceiver driver for phys to work */
+		usb: usb_otg_hs@47401000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47401000 0x400000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-dm816";
+				reg = <0x47401400 0x400
+				       0x47401000 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy0>;
+				phy-names = "usb2-phy";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-dm816";
+				reg = <0x47401c00 0x400
+				       0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy1>;
+				phy-names = "usb2-phy";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@47402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+			};
+		};
+
+		wd_timer2: wd_timer@480c2000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer";
+			reg = <0x480c2000 0x1000>;
+			interrupts = <0>;
+		};
+	};
+};
+
+#include "dm816x-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/dra7-dspeve-thermal.dtsi b/roms/u-boot/arch/arm/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 000000000..1c39a8459
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     3>;
+
+	trips {
+		dspeve_crit: dspeve_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra7-evm-common.dtsi b/roms/u-boot/arch/arm/dts/dra7-evm-common.dtsi
new file mode 100644
index 000000000..343e95f9a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra7-evm-common.dtsi
@@ -0,0 +1,258 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "dra7:usr1";
+			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "dra7:usr2";
+			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "dra7:usr3";
+			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "dra7:usr4";
+			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		USER1 {
+			label = "btnUser1";
+			linux,code = <BTN_0>;
+			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+		};
+
+		USER2 {
+			label = "btnUser2";
+			linux,code = <BTN_1>;
+			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mcspi1 {
+	status = "okay";
+};
+
+&mcspi2 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	dr_mode = "host";
+};
+
+&atl {
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra7-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/dra7-evm-u-boot.dtsi
new file mode 100644
index 000000000..f06c701db
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra7-evm-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "omap5-u-boot.dtsi"
+
+&pcf_gpio_21{
+	u-boot,i2c-offset-len = <0>;
+};
+
+&pcf_hdmi{
+	u-boot,i2c-offset-len = <0>;
+};
+
+&mmc2_pins_default {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_hs {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_ddr_rev20 {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_hs200 {
+	u-boot,dm-spl;
+};
+
+&mmc2_iodelay_hs200_rev20_conf {
+	u-boot,dm-spl;
+};
+
+&omap_dwc3_1 {
+	u-boot,dm-spl;
+};
+
+&usb1 {
+	u-boot,dm-spl;
+	dr_mode = "peripheral";
+};
+
+&usb2_phy1 {
+	u-boot,dm-spl;
+};
+
+&usb3_phy1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra7-evm.dts b/roms/u-boot/arch/arm/dts/dra7-evm.dts
new file mode 100644
index 000000000..43de9638e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra7-evm.dts
@@ -0,0 +1,513 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+
+/ {
+	model = "TI DRA742";
+	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	evm_3v3_sw: fixedregulator-evm_3v3_sw {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sw";
+		vin-supply = <&sysen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&sysen2>;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+		>;
+	};
+
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		ti,palmas-override-powerhold;
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* CORE_VDD */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVAHD */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDS1V8 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> SDIO  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_RTCIO */
+					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				/* REGEN1 is unused */
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resources */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				/* REGEN3 is unused */
+
+				sysen1: sysen1 {
+					/* PMIC_REGEN_3V3 */
+					regulator-name = "sysen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sysen2: sysen2 {
+					/* PMIC_REGEN_DDR */
+					regulator-name = "sysen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pcf_lcd: gpio@20 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf_hdmi: gpio@26 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&evm_3v3_sd>;
+	vqmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is always hardwired.
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
+	pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+	pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&evm_1v8_sw>;
+	bus-width = <8>;
+	pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
+	pinctrl-3 = <&mmc2_pins_ddr_rev20>;
+	pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
+	pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	/*
+	* For the existing IOdelay configuration via U-Boot we don't
+	* support NAND on dra7-evm. Keep it disabled. Enabling it
+	* requires a different configuration by U-Boot.
+	*/
+	status = "disabled";
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <80>;
+		gpmc,cs-wr-off-ns = <80>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <60>;
+		gpmc,adv-wr-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <50>;
+		gpmc,oe-on-ns = <4>;
+		gpmc,oe-off-ns = <40>;
+		gpmc,access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
+		gpmc,rd-cycle-ns = <80>;
+		gpmc,wr-cycle-ns = <80>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&dcan1 {
+	status = "ok";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&pcie1_rc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/dra7-iva-thermal.dtsi b/roms/u-boot/arch/arm/dts/dra7-iva-thermal.dtsi
new file mode 100644
index 000000000..dd74a5337
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra7-iva-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC IVA thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+iva_thermal: iva_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     4>;
+
+	trips {
+		iva_crit: iva_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra7-mmc-iodelay.dtsi b/roms/u-boot/arch/arm/dts/dra7-mmc-iodelay.dtsi
new file mode 100644
index 000000000..4acc215ba
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra7-mmc-iodelay.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MMC IOdelay values for TI's DRA7xx SoCs.
+ * Copyright (C) 2019 Texas Instruments
+ * Author: Faiz Abbas <faiz_abbas@ti.com>
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra7.dtsi b/roms/u-boot/arch/arm/dts/dra7.dtsi
new file mode 100644
index 000000000..fd1aea0b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra7.dtsi
@@ -0,0 +1,2072 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+#define MAX_SOURCES 400
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "ti,dra7xx";
+	interrupt-parent = <&crossbar_mpu>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+		serial9 = &uart10;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+		d_can0 = &dcan1;
+		d_can1 = &dcan2;
+		spi0 = &qspi;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x48211000 0x0 0x1000>,
+		      <0x0 0x48212000 0x0 0x2000>,
+		      <0x0 0x48214000 0x0 0x2000>,
+		      <0x0 0x48216000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x48281000 0x0 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_wkup>;
+
+		opp_nom-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1060000 850000 1150000>;
+			opp-supported-hw = <0xFF 0x01>;
+			opp-suspend;
+		};
+
+		opp_od-1176000000 {
+			opp-hz = /bits/ 64 <1176000000>;
+			opp-microvolt = <1160000 885000 1160000>;
+			opp-supported-hw = <0xFF 0x02>;
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the SOC interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,dra7-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+		ti,hwmods = "l3_main_1", "l3_main_2";
+		reg = <0x0 0x44000000 0x0 0x1000000>,
+		      <0x0 0x45000000 0x0 0x1000>;
+		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_cfg: l4@4a000000 {
+			compatible = "ti,dra7-l4-cfg", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a000000 0x22c000>;
+
+			scm: scm@2000 {
+				compatible = "ti,dra7-scm-core", "simple-bus";
+				reg = <0x2000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x1400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x0 0x1400>;
+
+					pbias_regulator: pbias_regulator@e00 {
+						compatible = "ti,pbias-dra7", "ti,pbias-omap";
+						reg = <0xe00 0x4>;
+						syscon = <&scm_conf>;
+						pbias_mmc_reg: pbias_mmc_omap5 {
+							regulator-name = "pbias_mmc_omap5";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+						};
+					};
+
+					scm_conf_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				dra7_pmx_core: pinmux@1400 {
+					compatible = "ti,dra7-padconf",
+						     "pinctrl-single";
+					reg = <0x1400 0x0468>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x3fffffff>;
+				};
+
+				scm_conf1: scm_conf@1c04 {
+					compatible = "syscon";
+					reg = <0x1c04 0x0020>;
+					#syscon-cells = <2>;
+				};
+
+				scm_conf_pcie: scm_conf@1c24 {
+					compatible = "syscon";
+					reg = <0x1c24 0x0024>;
+				};
+
+				sdma_xbar: dma-router@b78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xb78 0xfc>;
+					#dma-cells = <1>;
+					dma-requests = <205>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&sdma>;
+				};
+
+				edma_xbar: dma-router@c78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xc78 0x7c>;
+					#dma-cells = <2>;
+					dma-requests = <204>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&edma>;
+				};
+			};
+
+			cm_core_aon: cm_core_aon@5000 {
+				compatible = "ti,dra7-cm-core-aon";
+				reg = <0x5000 0x2000>;
+
+				cm_core_aon_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_aon_clockdomains: clockdomains {
+				};
+			};
+
+			cm_core: cm_core@8000 {
+				compatible = "ti,dra7-cm-core";
+				reg = <0x8000 0x3000>;
+
+				cm_core_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		l4_wkup: l4@4ae00000 {
+			compatible = "ti,dra7-l4-wkup", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4ae00000 0x3f000>;
+
+			counter32k: counter@4000 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x4000 0x40>;
+				ti,hwmods = "counter_32k";
+			};
+
+			prm: prm@6000 {
+				compatible = "ti,dra7-prm";
+				reg = <0x6000 0x3000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				prm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prm_clockdomains: clockdomains {
+				};
+			};
+
+			scm_wkup: scm_conf@c000 {
+				compatible = "syscon";
+				reg = <0xc000 0x1000>;
+			};
+		};
+
+		axi@0 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x51000000 0x51000000 0x3000
+				  0x0	     0x20000000 0x10000000>;
+			/**
+			 * To enable PCI endpoint mode, disable the pcie1_rc
+			 * node and enable pcie1_ep mode.
+			 */
+			pcie1_rc: pcie@51000000 {
+				compatible = "ti,dra7-pcie";
+				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+				reg-names = "rc_dbics", "ti_conf", "config";
+				interrupts = <0 232 0x4>, <0 233 0x4>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
+				#interrupt-cells = <1>;
+				num-lanes = <1>;
+				linux,pci-domain = <0>;
+				ti,hwmods = "pcie1";
+				phys = <&pcie1_phy>;
+				phy-names = "pcie-phy0";
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+						<0 0 0 2 &pcie1_intc 2>,
+						<0 0 0 3 &pcie1_intc 3>,
+						<0 0 0 4 &pcie1_intc 4>;
+				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie1_ep: pcie_ep@51000000 {
+				compatible = "ti,dra7-pcie-ep";
+				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
+				interrupts = <0 232 0x4>;
+				num-lanes = <1>;
+				num-ib-windows = <4>;
+				num-ob-windows = <16>;
+				ti,hwmods = "pcie1";
+				phys = <&pcie1_phy>;
+				phy-names = "pcie-phy0";
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+				status = "disabled";
+			};
+		};
+
+		axi@1 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x51800000 0x51800000 0x3000
+				  0x0	     0x30000000 0x10000000>;
+			status = "disabled";
+			pcie@51800000 {
+				compatible = "ti,dra7-pcie";
+				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+				reg-names = "rc_dbics", "ti_conf", "config";
+				interrupts = <0 355 0x4>, <0 356 0x4>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
+				#interrupt-cells = <1>;
+				num-lanes = <1>;
+				linux,pci-domain = <1>;
+				ti,hwmods = "pcie2";
+				phys = <&pcie2_phy>;
+				phy-names = "pcie-phy0";
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
+						<0 0 0 2 &pcie2_intc 2>,
+						<0 0 0 3 &pcie2_intc 3>,
+						<0 0 0 4 &pcie2_intc 4>;
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		ocmcram1: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x80000>;
+			ranges = <0x0 0x40300000 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * This is a placeholder for an optional reserved
+			 * region for use by secure software. The size
+			 * of this region is not known until runtime so it
+			 * is set as zero to either be updated to reserve
+			 * space or left unchanged to leave all SRAM for use.
+			 * On HS parts that that require the reserved region
+			 * either the bootloader can update the size to
+			 * the required amount or the node can be overridden
+			 * from the board dts file for the secure platform.
+			 */
+			sram-hs@0 {
+				compatible = "ti,secure-ram";
+				reg = <0x0 0x0>;
+			};
+		};
+
+		/*
+		 * NOTE: ocmcram2 and ocmcram3 are not available on all
+		 * DRA7xx and AM57xx variants. Confirm availability in
+		 * the data manual for the exact part number in use
+		 * before enabling these nodes in the board dts file.
+		 */
+		ocmcram2: ocmcram@40400000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40400000 0x100000>;
+			ranges = <0x0 0x40400000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		ocmcram3: ocmcram@40500000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40500000 0x100000>;
+			ranges = <0x0 0x40500000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		bandgap: bandgap@4a0021e0 {
+			reg = <0x4a0021e0 0xc
+				0x4a00232c 0xc
+				0x4a002380 0x2c
+				0x4a0023C0 0x3c
+				0x4a002564 0x8
+				0x4a002574 0x50>;
+				compatible = "ti,dra752-bandgap";
+				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <1>;
+		};
+
+		dsp1_system: dsp_system@40d00000 {
+			compatible = "syscon";
+			reg = <0x40d00000 0x100>;
+		};
+
+		dra7_iodelay_core: padconf@4844a000 {
+			compatible = "ti,dra7-iodelay";
+			reg = <0x4844a000 0x0d1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <2>;
+		};
+
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <32>;
+			dma-requests = <127>;
+		};
+
+		edma: edma@43300000 {
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg = <0x43300000 0x100000>;
+			reg-names = "edma3_cc";
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "edma3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+			/*
+			 * memcpy is disabled, can be enabled with:
+			 * ti,edma-memcpy-channels = <20 21>;
+			 * for example. Note that these channels need to be
+			 * masked in the xbar as well.
+			 */
+		};
+
+		edma_tptc0: tptc@43400000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x43400000 0x100000>;
+			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@43500000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x43500000 0x100000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
+			dma-names = "tx", "rx";
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
+			dma-names = "tx", "rx";
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
+			dma-names = "tx", "rx";
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+                        status = "disabled";
+			dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
+			dma-names = "tx", "rx";
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
+			dma-names = "tx", "rx";
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
+			dma-names = "tx", "rx";
+		};
+
+		uart7: serial@48420000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x48420000 0x100>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart7";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart8: serial@48422000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x48422000 0x100>;
+			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart8";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart9: serial@48424000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x48424000 0x100>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart9";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart10: serial@4ae2b000 {
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
+			reg = <0x4ae2b000 0x100>;
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart10";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		mailbox1: mailbox@4a0f4000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4a0f4000 0x200>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox1";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <3>;
+			ti,mbox-num-fifos = <8>;
+			status = "disabled";
+		};
+
+		mailbox2: mailbox@4883a000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4883a000 0x200>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox2";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox3: mailbox@4883c000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4883c000 0x200>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox3";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox4: mailbox@4883e000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4883e000 0x200>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox4";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox5: mailbox@48840000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48840000 0x200>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox5";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox6: mailbox@48842000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48842000 0x200>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox6";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox7: mailbox@48844000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48844000 0x200>;
+			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox7";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox8: mailbox@48846000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48846000 0x200>;
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox8";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox9: mailbox@4885e000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4885e000 0x200>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox9";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox10: mailbox@48860000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48860000 0x200>;
+			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox10";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox11: mailbox@48862000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48862000 0x200>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox11";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox12: mailbox@48864000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48864000 0x200>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox12";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox13: mailbox@48802000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48802000 0x200>;
+			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox13";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@48820000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48820000 0x80>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer5";
+		};
+
+		timer6: timer@48822000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48822000 0x80>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer6";
+		};
+
+		timer7: timer@48824000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48824000 0x80>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer7";
+		};
+
+		timer8: timer@48826000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48826000 0x80>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+		};
+
+		timer12: timer@4ae20000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae20000 0x80>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
+
+		timer13: timer@48828000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48828000 0x80>;
+			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer13";
+		};
+
+		timer14: timer@4882a000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882a000 0x80>;
+			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer14";
+		};
+
+		timer15: timer@4882c000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882c000 0x80>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer15";
+		};
+
+		timer16: timer@4882e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882e000 0x80>;
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer16";
+		};
+
+		wdt2: wdt@4ae14000 {
+			compatible = "ti,omap3-wdt";
+			reg = <0x4ae14000 0x80>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "dmm";
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+			status = "disabled";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+			status = "disabled";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+			status = "disabled";
+		};
+
+		i2c4: i2c@4807a000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+			status = "disabled";
+		};
+
+		i2c5: i2c@4807c000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+			status = "disabled";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+			pbias-supply = <&pbias_mmc_reg>;
+			max-frequency = <192000000>;
+			sd-uhs-sdr104;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr25;
+			sd-uhs-sdr12;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+			max-frequency = <192000000>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr12;
+			mmc-hs200-1_8v;
+			mmc-ddr-1_8v;
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+			/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
+			max-frequency = <64000000>;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+			dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+			max-frequency = <192000000>;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+		};
+
+		mmu0_dsp1: mmu@40d01000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d01000 0x100>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp1: mmu@40d02000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d02000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			status = "disabled";
+		};
+
+		mmu_ipu1: mmu@58882000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x58882000 0x100>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu1";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
+		mmu_ipu2: mmu@55082000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu2";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
+			      <0x4ae0c158 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1160000		0	0x4	0 0x02000000 0x01F00000
+			1210000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_ivahd: regulator-abb-ivahd {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_ivahd";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
+			      <0x4a002470 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x40000000>;
+			/* LDOVBBIVA_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBIVA_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_dspeve: regulator-abb-dspeve {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_dspeve";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
+			      <0x4a00246c 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x20000000>;
+			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBDSPEVE_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_gpu: regulator-abb-gpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_gpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
+			      <0x4ae0c154 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x10000000>;
+			/* LDOVBBGPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBGPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1090000		0	0x0	0 0x02000000 0x01F00000
+			1210000		0	0x4	0 0x02000000 0x01F00000
+			1280000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma_xbar 35>,
+			       <&sdma_xbar 36>,
+			       <&sdma_xbar 37>,
+			       <&sdma_xbar 38>,
+			       <&sdma_xbar 39>,
+			       <&sdma_xbar 40>,
+			       <&sdma_xbar 41>,
+			       <&sdma_xbar 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+			status = "disabled";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma_xbar 43>,
+			       <&sdma_xbar 44>,
+			       <&sdma_xbar 45>,
+			       <&sdma_xbar 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+			status = "disabled";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+
+		qspi: qspi@4b300000 {
+			compatible = "ti,dra7xxx-qspi";
+			reg = <0x4b300000 0x100>,
+			      <0x5c000000 0x4000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			syscon-chipselects = <&scm_conf 0x558>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			clocks = <&qspi_gfclk_div>;
+			clock-names = "fck";
+			num-cs = <4>;
+			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		/* OCP2SCP3 */
+		ocp2scp@4a090000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a090000 0x20>;
+			ti,hwmods = "ocp2scp3";
+			sata_phy: phy@4A096000 {
+				compatible = "ti,phy-pipe3-sata";
+				reg = <0x4A096000 0x80>, /* phy_rx */
+				      <0x4A096400 0x64>, /* phy_tx */
+				      <0x4A096800 0x40>; /* pll_ctrl */
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				syscon-phy-power = <&scm_conf 0x374>;
+				clocks = <&sys_clkin1>, <&sata_ref_clk>;
+				clock-names = "sysclk", "refclk";
+				syscon-pllreset = <&scm_conf 0x3fc>;
+				#phy-cells = <0>;
+			};
+
+			pcie1_phy: pciephy@4a094000 {
+				compatible = "ti,phy-pipe3-pcie";
+				reg = <0x4a094000 0x80>, /* phy_rx */
+				      <0x4a094400 0x64>; /* phy_tx */
+				reg-names = "phy_rx", "phy_tx";
+				syscon-phy-power = <&scm_conf_pcie 0x1c>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
+				clocks = <&dpll_pcie_ref_ck>,
+					 <&dpll_pcie_ref_m2ldo_ck>,
+					 <&optfclk_pciephy1_32khz>,
+					 <&optfclk_pciephy1_clk>,
+					 <&optfclk_pciephy1_div_clk>,
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
+				clock-names = "dpll_ref", "dpll_ref_m2",
+					      "wkupclk", "refclk",
+					      "div-clk", "phy-div", "sysclk";
+				#phy-cells = <0>;
+			};
+
+			pcie2_phy: pciephy@4a095000 {
+				compatible = "ti,phy-pipe3-pcie";
+				reg = <0x4a095000 0x80>, /* phy_rx */
+				      <0x4a095400 0x64>; /* phy_tx */
+				reg-names = "phy_rx", "phy_tx";
+				syscon-phy-power = <&scm_conf_pcie 0x20>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
+				clocks = <&dpll_pcie_ref_ck>,
+					 <&dpll_pcie_ref_m2ldo_ck>,
+					 <&optfclk_pciephy2_32khz>,
+					 <&optfclk_pciephy2_clk>,
+					 <&optfclk_pciephy2_div_clk>,
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
+				clock-names = "dpll_ref", "dpll_ref_m2",
+					      "wkupclk", "refclk",
+					      "div-clk", "phy-div", "sysclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&sata_ref_clk>;
+			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
+		};
+
+		rtc: rtc@48838000 {
+			compatible = "ti,am3352-rtc";
+			reg = <0x48838000 0x100>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "rtcss";
+			clocks = <&sys_32k_ck>;
+		};
+
+		/* OCP2SCP1 */
+		ocp2scp@4a080000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a080000 0x20>;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy1: phy@4a084000 {
+				compatible = "ti,dra7x-usb2", "ti,omap-usb2";
+				reg = <0x4a084000 0x400>;
+				syscon-phy-power = <&scm_conf 0x300>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb2_phy2: phy@4a085000 {
+				compatible = "ti,dra7x-usb2-phy2",
+					     "ti,omap-usb2";
+				reg = <0x4a085000 0x400>;
+				syscon-phy-power = <&scm_conf 0xe74>;
+				clocks = <&usb_phy2_always_on_clk32k>,
+					 <&usb_otg_ss2_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb3_phy1: phy@4a084400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4a084400 0x80>,
+				      <0x4a084800 0x64>,
+				      <0x4a084c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				syscon-phy-power = <&scm_conf 0x370>;
+				clocks = <&usb_phy3_always_on_clk32k>,
+					 <&sys_clkin1>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"sysclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		omap_dwc3_1: omap_dwc3_1@48880000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x48880000 0x10000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb1: usb@48890000 {
+				compatible = "snps,dwc3";
+				reg = <0x48890000 0x17000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
+				phys = <&usb2_phy1>, <&usb3_phy1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
+				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		omap_dwc3_2: omap_dwc3_2@488c0000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss2";
+			reg = <0x488c0000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb2: usb@488d0000 {
+				compatible = "snps,dwc3";
+				reg = <0x488d0000 0x17000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+		omap_dwc3_3: omap_dwc3_3@48900000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss3";
+			reg = <0x48900000 0x10000>;
+			interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb3: usb@48910000 {
+				compatible = "snps,dwc3";
+				reg = <0x48910000 0x17000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		elm: elm@48078000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48078000 0xfc0>;      /* device IO registers */
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x37c>;      /* device IO registers */
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 4 0>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		atl: atl@4843c000 {
+			compatible = "ti,dra7-atl";
+			reg = <0x4843c000 0x3ff>;
+			ti,hwmods = "atl";
+			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+			clocks = <&atl_gfclk_mux>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		mcasp1: mcasp@48460000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x48460000 0x2000>,
+			      <0x45800000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
+				 <&mcasp1_ahclkr_mux>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			status = "disabled";
+		};
+
+		mcasp2: mcasp@48464000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp2";
+			reg = <0x48464000 0x2000>,
+			      <0x45c00000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
+				 <&mcasp2_ahclkr_mux>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			status = "disabled";
+		};
+
+		mcasp3: mcasp@48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>,
+			      <0x46000000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp4: mcasp@4846c000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp4";
+			reg = <0x4846c000 0x2000>,
+			      <0x48436000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp5: mcasp@48470000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp5";
+			reg = <0x48470000 0x2000>,
+			      <0x4843a000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp6: mcasp@48474000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp6";
+			reg = <0x48474000 0x2000>,
+			      <0x4844c000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp7: mcasp@48478000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp7";
+			reg = <0x48478000 0x2000>,
+			      <0x48450000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp8: mcasp@4847c000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp8";
+			reg = <0x4847c000 0x2000>,
+			      <0x48454000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		crossbar_mpu: crossbar@4a002a48 {
+			compatible = "ti,irq-crossbar";
+			reg = <0x4a002a48 0x130>;
+			interrupt-controller;
+			interrupt-parent = <&wakeupgen>;
+			#interrupt-cells = <3>;
+			ti,max-irqs = <160>;
+			ti,max-crossbar-sources = <MAX_SOURCES>;
+			ti,reg-size = <2>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
+			ti,irqs-skip = <10 133 139 140>;
+			ti,irqs-safe-map = <0>;
+		};
+
+		mac: ethernet@48484000 {
+			compatible = "ti,dra7-cpsw","ti,cpsw";
+			ti,hwmods = "gmac";
+			clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
+			clock-names = "fck", "cpts";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x784CFE14>;
+			cpts_clock_shift = <29>;
+			reg = <0x48484000 0x1000
+			       0x48485200 0x2E00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
+			/*
+			 * rx_thresh_pend
+			 * rx_pend
+			 * tx_pend
+			 * misc_pend
+			 */
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+			ranges;
+			syscon = <&scm_conf>;
+			status = "disabled";
+
+			davinci_mdio: mdio@48485000 {
+				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x48485000 0x100>;
+			};
+
+			cpsw_emac0: slave@48480200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@48480300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@4a002554 {
+				compatible = "ti,dra7xx-cpsw-phy-sel";
+				reg= <0x4a002554 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
+		dcan1: can@481cc000 {
+			compatible = "ti,dra7-d_can";
+			ti,hwmods = "dcan1";
+			reg = <0x4ae3c000 0x2000>;
+			syscon-raminit = <&scm_conf 0x558 0>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcan1_sys_clk_mux>;
+			status = "disabled";
+		};
+
+		dcan2: can@481d0000 {
+			compatible = "ti,dra7-d_can";
+			ti,hwmods = "dcan2";
+			reg = <0x48480000 0x2000>;
+			syscon-raminit = <&scm_conf 0x558 1>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clkin1>;
+			status = "disabled";
+		};
+
+		dss: dss@58000000 {
+			compatible = "ti,dra7-dss";
+			/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
+			/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			/* CTRL_CORE_DSS_PLL_CONTROL */
+			syscon-pll-ctrl = <&scm_conf 0x538>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@58001000 {
+				compatible = "ti,dra7-dispc";
+				reg = <0x58001000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss_dss_clk>;
+				clock-names = "fck";
+				/* CTRL_CORE_SMA_SW_1 */
+				syscon-pol = <&scm_conf 0x534>;
+			};
+
+			hdmi: encoder@58060000 {
+				compatible = "ti,dra7-hdmi";
+				reg = <0x58040000 0x200>,
+				      <0x58040200 0x80>,
+				      <0x58040300 0x80>,
+				      <0x58060000 0x19000>;
+				reg-names = "wp", "pll", "phy", "core";
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_hdmi";
+				clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+		};
+
+		epwmss0: epwmss@4843e000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x4843e000 0x30>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm0: pwm@4843e200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x4843e200 0x80>;
+				clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap0: ecap@4843e100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x4843e100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48440000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48440000 0x30>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm1: pwm@48440200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48440200 0x80>;
+				clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap1: ecap@48440100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48440100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48442000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48442000 0x30>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm2: pwm@48442200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48442200 0x80>;
+				clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap2: ecap@48442100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48442100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		aes1: aes@4b500000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes1";
+			reg = <0x4b500000 0xa0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		aes2: aes@4b700000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes2";
+			reg = <0x4b700000 0xa0>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		des: des@480a5000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x480a5000 0xa0>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x4b101000 0x300>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 119 0>;
+			dma-names = "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		rng: rng@48090000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48090000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+		#include "omap5-gpu-thermal.dtsi"
+		#include "omap5-core-thermal.dtsi"
+		#include "dra7-dspeve-thermal.dtsi"
+		#include "dra7-iva-thermal.dtsi"
+	};
+
+};
+
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
+	coefficients = <0 2000>;
+};
+
+&gpu_thermal {
+	coefficients = <0 2000>;
+};
+
+&core_thermal {
+	coefficients = <0 2000>;
+};
+
+&dspeve_thermal {
+	coefficients = <0 2000>;
+};
+
+&iva_thermal {
+	coefficients = <0 2000>;
+};
+
+&cpu_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+/include/ "dra7xx-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/dra71-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/dra71-evm-u-boot.dtsi
new file mode 100644
index 000000000..b56d4fc9d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra71-evm-u-boot.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "omap5-u-boot.dtsi"
+
+&pcf_gpio_21{
+	u-boot,i2c-offset-len = <0>;
+};
+
+&pcf_hdmi{
+	u-boot,i2c-offset-len = <0>;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&dp83867_0>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&dp83867_1>;
+};
+
+&mmc2_pins_default {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_hs {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_ddr_rev20 {
+	u-boot,dm-spl;
+};
+
+&mmc2_iodelay_ddr_conf {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_hs200 {
+	u-boot,dm-spl;
+};
+
+&mmc2_iodelay_hs200_rev20_conf {
+	u-boot,dm-spl;
+};
+
+&omap_dwc3_1 {
+	u-boot,dm-spl;
+};
+
+&usb1 {
+	u-boot,dm-spl;
+	dr_mode = "peripheral";
+};
+
+&usb2_phy1 {
+	u-boot,dm-spl;
+};
+
+&usb3_phy1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra71-evm.dts b/roms/u-boot/arch/arm/dts/dra71-evm.dts
new file mode 100644
index 000000000..9bf08294b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra71-evm.dts
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
+	model = "TI DRA718 EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+
+	vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vddshv8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&evm_5v0>;
+
+		gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0
+			  3300000 0x1>;
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&lp8732_buck0_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	poweroff: gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lp8733: lp8733@60 {
+		compatible = "ti,lp8733";
+		reg = <0x60>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&evm_5v0>;
+		ldo1-in-supply =<&evm_5v0>;
+
+		lp8733_regulators: regulators {
+			lp8733_buck0_reg: buck0 {
+				/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
+				regulator-name = "lp8733-buck0";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8733_buck1_reg: buck1 {
+				/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
+				regulator-name = "lp8733-buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8733_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
+				regulator-name = "lp8733-ldo0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			lp8733_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
+				regulator-name = "lp8733-ldo1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	lp8732: lp8732@61 {
+		compatible = "ti,lp8732";
+		reg = <0x61>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&vsys_3v3>;
+		ldo1-in-supply =<&vsys_3v3>;
+
+		lp8732_regulators: regulators {
+			lp8732_buck0_reg: buck0 {
+				/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
+				regulator-name = "lp8732-buck0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8732_buck1_reg: buck1 {
+				/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
+				regulator-name = "lp8732-buck1";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
+				regulator-name = "lp8732-ldo0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
+				regulator-name = "lp8732-ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pcf_lcd {
+	interrupt-parent = <&gpio7>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio7>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_hdmi {
+	p0 {
+		/*
+		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
+		 * With this PM_SEL(p3) should not matter
+		 */
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "pm_oe_n";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+	vqmmc-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
+};
+
+&mac {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+/* No Sata on this device */
+&sata_phy {
+	status = "disabled";
+};
+
+&sata {
+	status = "disabled";
+};
+
+/* No RTC on this device */
+&rtc {
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&dss {
+	/* Supplied by VDA_1V8_PLL */
+	vdda_video-supply = <&lp8732_ldo0_reg>;
+};
+
+&hdmi {
+	/* Supplied by VDA_1V8_PHY */
+	vdda_video-supply = <&lp8732_ldo1_reg>;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra72-evm-common.dtsi b/roms/u-boot/arch/arm/dts/dra72-evm-common.dtsi
new file mode 100644
index 000000000..2e485a13d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra72-evm-common.dtsi
@@ -0,0 +1,569 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+
+/ {
+	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm5v0 {
+		/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_3v3_sw: fixedregulator-evm_3v3 {
+		/* TPS22965DSG */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_3v3_sw>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
+			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf_lcd: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf_hdmi: pcf8575@26 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * initial state is used here to keep the mdio interface
+		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
+		 * VIN2_S0 driven high otherwise Ethernet stops working
+		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
+		 */
+		lines-initial-states = <0x0f2b>;
+
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	/*
+	 * For the existing IOdelay configuration via U-Boot we don't
+	 * support NAND on dra72-evm. Keep it disabled. Enabling it
+	 * requires a different configuration by U-Boot.
+	 */
+	status = "disabled";
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		/* To use NAND, DIP switch SW5 must be set like so:
+		 * SW5.1 (NAND_SELn) = ON (LOW)
+		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
+		 */
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <80>;
+		gpmc,cs-wr-off-ns = <80>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <60>;
+		gpmc,adv-wr-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <50>;
+		gpmc,oe-on-ns = <4>;
+		gpmc,oe-off-ns = <40>;
+		gpmc,access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
+		gpmc,rd-cycle-ns = <80>;
+		gpmc,wr-cycle-ns = <80>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	dr_mode = "host";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	vmmc-supply = <&evm_3v3_sd>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is a viable alternative
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	max-frequency = <192000000>;
+};
+
+&mmc2 {
+	/* SW5-3 in ON position */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+	bus-width = <8>;
+	ti,non-removable;
+	max-frequency = <192000000>;
+};
+
+&mac {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "ok";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&atl {
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/dra72-evm-revc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/dra72-evm-revc-u-boot.dtsi
new file mode 100644
index 000000000..b56d4fc9d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra72-evm-revc-u-boot.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "omap5-u-boot.dtsi"
+
+&pcf_gpio_21{
+	u-boot,i2c-offset-len = <0>;
+};
+
+&pcf_hdmi{
+	u-boot,i2c-offset-len = <0>;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&dp83867_0>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&dp83867_1>;
+};
+
+&mmc2_pins_default {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_hs {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_ddr_rev20 {
+	u-boot,dm-spl;
+};
+
+&mmc2_iodelay_ddr_conf {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_hs200 {
+	u-boot,dm-spl;
+};
+
+&mmc2_iodelay_hs200_rev20_conf {
+	u-boot,dm-spl;
+};
+
+&omap_dwc3_1 {
+	u-boot,dm-spl;
+};
+
+&usb1 {
+	u-boot,dm-spl;
+	dr_mode = "peripheral";
+};
+
+&usb2_phy1 {
+	u-boot,dm-spl;
+};
+
+&usb3_phy1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra72-evm-revc.dts b/roms/u-boot/arch/arm/dts/dra72-evm-revc.dts
new file mode 100644
index 000000000..fafc2a4d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra72-evm-revc.dts
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI DRA722 Rev C EVM";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
+	};
+};
+
+#include "dra72-evm-tps65917.dtsi"
+
+&ldo2_reg {
+	/* LDO2_OUT --> VDDA_1V8_PHY2 */
+	regulator-always-on;
+	regulator-boot-on;
+};
+
+&hdmi {
+	vdda-supply = <&ldo2_reg>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio3>;
+	interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra72-evm-tps65917.dtsi b/roms/u-boot/arch/arm/dts/dra72-evm-tps65917.dtsi
new file mode 100644
index 000000000..57bfe5caf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra72-evm-tps65917.dtsi
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
+ */
+
+&tps65917 {
+	compatible = "ti,tps65917";
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	ti,system-power-controller;
+
+	tps65917_pmic {
+		compatible = "ti,tps65917-pmic";
+
+		smps1-in-supply = <&vsys_3v3>;
+		smps2-in-supply = <&vsys_3v3>;
+		smps3-in-supply = <&vsys_3v3>;
+		smps4-in-supply = <&vsys_3v3>;
+		smps5-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
+		ldo2-in-supply = <&vsys_3v3>;
+		ldo3-in-supply = <&vsys_3v3>;
+		ldo4-in-supply = <&evm_5v0>;
+		ldo5-in-supply = <&vsys_3v3>;
+
+		tps65917_regulators: regulators {
+			smps1_reg: smps1 {
+				/* VDD_MPU */
+				regulator-name = "smps1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps2_reg: smps2 {
+				/* VDD_CORE */
+				regulator-name = "smps2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps3_reg: smps3 {
+				/* VDD_GPU IVA DSPEVE */
+				regulator-name = "smps3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps4_reg: smps4 {
+				/* VDDS1V8 */
+				regulator-name = "smps4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps5_reg: smps5 {
+				/* VDD_DDR */
+				regulator-name = "smps5";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/* LDO1_OUT --> SDIO  */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-allow-bypass;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allow-bypass;
+			};
+
+			ldo3_reg: ldo3 {
+				/* VDDA_1V8_PHY */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				/* VDDA_1V8_PLL */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				/* VDDA_3V_USB: VDDA_USBHS33 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tps65917_power_button {
+		compatible = "ti,palmas-pwrbutton";
+		interrupt-parent = <&tps65917>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		wakeup-source;
+		ti,palmas-long-press-seconds = <6>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+	vqmmc-supply = <&ldo1_reg>;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra72-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/dra72-evm-u-boot.dtsi
new file mode 100644
index 000000000..6c868f75d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra72-evm-u-boot.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "omap5-u-boot.dtsi"
+
+&omap_dwc3_1 {
+	u-boot,dm-spl;
+};
+
+&usb1 {
+	u-boot,dm-spl;
+	dr_mode = "peripheral";
+};
+
+&usb2_phy1 {
+	u-boot,dm-spl;
+};
+
+&usb3_phy1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra72-evm.dts b/roms/u-boot/arch/arm/dts/dra72-evm.dts
new file mode 100644
index 000000000..154b0a0ce
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra72-evm.dts
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+/ {
+	model = "TI DRA722";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
+	};
+};
+
+#include "dra72-evm-tps65917.dtsi"
+
+&hdmi {
+	vdda-supply = <&ldo3_reg>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio6>;
+	interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac {
+	slaves = <1>;
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra72x-mmc-iodelay.dtsi b/roms/u-boot/arch/arm/dts/dra72x-mmc-iodelay.dtsi
new file mode 100644
index 000000000..088013c6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra72x-mmc-iodelay.dtsi
@@ -0,0 +1,350 @@
+/*
+ * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev10' for PG 1.0,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and
+ *    'dra72_' tag to entries. Both the new and old entries should gain a tag.
+ *
+ * Datamanual Revisions:
+ *
+ * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
+ * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
+ * DRA71x : SPRS960B, Revised February 2017
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr12: mmc1_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr25: mmc1_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr104: mmc1_pins_sdr104 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs: mmc2_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a22.mmc2_dat7 */
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs1.mmc2_cmd */
+		>;
+	};
+
+	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(588) G_DELAY_PS(0)	/* CFG_MMC1_CLK_IN */
+			0x624 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x630 A_DELAY_PS(1375) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x63C A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x648 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x654 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x620 A_DELAY_PS(1230) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x62C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(56) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(76) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65C A_DELAY_PS(99) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC1_MANUAL2 in datamanual */
+	mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(560) G_DELAY_PS(365)	/* CFG_MMC1_CLK_OUT */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(29) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(47) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65c A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(125) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(43) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(433) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64c A_DELAY_PS(287) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(351) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC1_MANUAL2 in datamanual */
+	mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(520) G_DELAY_PS(320)	/* CFG_MMC1_CLK_OUT */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(40) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(83) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(98) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65c A_DELAY_PS(106) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(51) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(363) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64c A_DELAY_PS(199) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(273) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_IN */
+			0x1a4 A_DELAY_PS(119) G_DELAY_PS(0)	/* CFG_GPMC_A20_IN */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_IN */
+			0x1bc A_DELAY_PS(18) G_DELAY_PS(0)	/* CFG_GPMC_A22_IN */
+			0x1c8 A_DELAY_PS(894) G_DELAY_PS(0)	/* CFG_GPMC_A23_IN */
+			0x1d4 A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_GPMC_A24_IN */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1ec A_DELAY_PS(23) G_DELAY_PS(0)	/* CFG_GPMC_A26_IN */
+			0x1f8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_IN */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x194 A_DELAY_PS(152) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(206) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(78) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(2) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(266) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(43) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL3 in datamanual */
+	mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf {
+		pinctrl-pin-array = <
+			0x194 A_DELAY_PS(150) G_DELAY_PS(95)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(250) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(125) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(100) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(870) G_DELAY_PS(415)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(695) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(924) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(719) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(824) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(877) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(446) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(847) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(586) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(1039) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL3 in datamanual */
+	mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+		pinctrl-pin-array = <
+			0x194 A_DELAY_PS(285) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(189) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(70)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(730) G_DELAY_PS(360)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(70) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(231) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(39) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(176) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(101) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(360) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra72x.dtsi b/roms/u-boot/arch/arm/dts/dra72x.dtsi
new file mode 100644
index 000000000..67107605f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra72x.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&wakeupgen>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&dss {
+	reg = <0x58000000 0x80>,
+	      <0x58004054 0x4>,
+	      <0x58004300 0x20>;
+	reg-names = "dss", "pll1_clkctrl", "pll1";
+
+	clocks = <&dss_dss_clk>,
+		 <&dss_video1_clk>;
+	clock-names = "fck", "video1_clk";
+};
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra74x-mmc-iodelay.dtsi b/roms/u-boot/arch/arm/dts/dra74x-mmc-iodelay.dtsi
new file mode 100644
index 000000000..214b9e6de
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra74x-mmc-iodelay.dtsi
@@ -0,0 +1,647 @@
+/*
+ * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
+ * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
+ *
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr12: mmc1_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr25: mmc1_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50: mmc1_pins_ddr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr104: mmc1_pins_sdr104 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs: mmc2_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc4_pins_default: mmc4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc4_pins_hs: mmc4_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc3_pins_default: mmc3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_hs: mmc3_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr12: mmc3_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr25: mmc3_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr50: mmc3_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc4_pins_sdr12: mmc4_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc4_pins_sdr25: mmc4_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(572) G_DELAY_PS(540)	/* CFG_MMC1_CLK_IN */
+			0x620 A_DELAY_PS(1525) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x624 A_DELAY_PS(0) G_DELAY_PS(600)	/* CFG_MMC1_CMD_IN */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(55) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x630 A_DELAY_PS(403) G_DELAY_PS(120)	/* CFG_MMC1_DAT0_IN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x63c A_DELAY_PS(23) G_DELAY_PS(60)	/* CFG_MMC1_DAT1_IN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x648 A_DELAY_PS(25) G_DELAY_PS(60)	/* CFG_MMC1_DAT2_IN */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(1076) G_DELAY_PS(330)	/* CFG_MMC1_CLK_IN */
+			0x620 A_DELAY_PS(1271) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x624 A_DELAY_PS(722) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x630 A_DELAY_PS(751) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(20) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x63C A_DELAY_PS(256) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x648 A_DELAY_PS(263) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x64C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(1063) G_DELAY_PS(17)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(23) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(2) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(600) G_DELAY_PS(400)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(621) G_DELAY_PS(600)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(300) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(739) G_DELAY_PS(600)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(812) G_DELAY_PS(600)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(954) G_DELAY_PS(600)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(60)  G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420)	/* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(935) G_DELAY_PS(600)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(525) G_DELAY_PS(600)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(767) G_DELAY_PS(600)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(225) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(565) G_DELAY_PS(600)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(60) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(969) G_DELAY_PS(600)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(180) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(274) G_DELAY_PS(0)       /* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(162) G_DELAY_PS(0)       /* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(401) G_DELAY_PS(0)       /* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(73) G_DELAY_PS(0)        /* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(465) G_DELAY_PS(0)       /* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(115) G_DELAY_PS(0)       /* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(633) G_DELAY_PS(0)       /* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(47) G_DELAY_PS(0)        /* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(935) G_DELAY_PS(280)     /* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(621) G_DELAY_PS(0)       /* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(183) G_DELAY_PS(0)       /* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(467) G_DELAY_PS(0)       /* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(262) G_DELAY_PS(0)       /* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(46) G_DELAY_PS(0)        /* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(684) G_DELAY_PS(0)       /* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(76) G_DELAY_PS(0)        /* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A19_IN */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(174) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a4 A_DELAY_PS(265) G_DELAY_PS(360)	/* CFG_GPMC_A20_IN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(168) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_IN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(136) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1bc A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A22_IN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1c8 A_DELAY_PS(287) G_DELAY_PS(420)	/* CFG_GPMC_A23_IN */
+			0x1d0 A_DELAY_PS(879) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1d4 A_DELAY_PS(144) G_DELAY_PS(240)	/* CFG_GPMC_A24_IN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(34) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1ec A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A26_IN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1f8 A_DELAY_PS(120) G_DELAY_PS(180)	/* CFG_GPMC_A27_IN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(11) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_IN */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(174) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a4 A_DELAY_PS(274) G_DELAY_PS(240)	/* CFG_GPMC_A20_IN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(168) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A21_IN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(136) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1bc A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A22_IN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1c8 A_DELAY_PS(514) G_DELAY_PS(360)	/* CFG_GPMC_A23_IN */
+			0x1d0 A_DELAY_PS(879) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1d4 A_DELAY_PS(187) G_DELAY_PS(120)	/* CFG_GPMC_A24_IN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(34) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1ec A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A26_IN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1f8 A_DELAY_PS(121) G_DELAY_PS(60)	/* CFG_GPMC_A27_IN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(11) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(0) G_DELAY_PS(386)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(605) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(171) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(221) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(474) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(406) G_DELAY_PS(0)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(659) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(130) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(169) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(457) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(96) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(582) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(391) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(561) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(588) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(307) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(785) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(613) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(683) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(835) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(2651) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1572) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(1913) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1721) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1891) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(1919) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(1147) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1834) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(2165) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1929) G_DELAY_PS(64)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1935) G_DELAY_PS(128)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(2172) G_DELAY_PS(44)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra74x.dtsi b/roms/u-boot/arch/arm/dts/dra74x.dtsi
new file mode 100644
index 000000000..24e6746c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra74x.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&wakeupgen>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ocp {
+		dsp2_system: dsp_system@41500000 {
+			compatible = "syscon";
+			reg = <0x41500000 0x100>;
+		};
+
+		omap_dwc3_4: omap_dwc3_4@48940000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss4";
+			reg = <0x48940000 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb4: usb@48950000 {
+				compatible = "snps,dwc3";
+				reg = <0x48950000 0x17000>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		mmu0_dsp2: mmu@41501000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x41501000 0x100>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp2";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp2: mmu@41502000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x41502000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp2";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+			status = "disabled";
+		};
+	};
+};
+
+&cpu0_opp_table {
+	opp-shared;
+};
+
+&dss {
+	reg = <0x58000000 0x80>,
+	      <0x58004054 0x4>,
+	      <0x58004300 0x20>,
+	      <0x58009054 0x4>,
+	      <0x58009300 0x20>;
+	reg-names = "dss", "pll1_clkctrl", "pll1",
+		    "pll2_clkctrl", "pll2";
+
+	clocks = <&dss_dss_clk>,
+		 <&dss_video1_clk>,
+		 <&dss_video2_clk>;
+	clock-names = "fck", "video1_clk", "video2_clk";
+};
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra76-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/dra76-evm-u-boot.dtsi
new file mode 100644
index 000000000..a4dfbe7e6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra76-evm-u-boot.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "omap5-u-boot.dtsi"
+
+&cpsw_emac0 {
+	phy-handle = <&dp83867_0>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&dp83867_1>;
+};
+
+&mmc2_pins_default {
+	u-boot,dm-spl;
+};
+
+&mmc2_pins_hs200 {
+	u-boot,dm-spl;
+};
+
+&mmc2_iodelay_hs200_conf {
+	u-boot,dm-spl;
+};
+
+&omap_dwc3_1 {
+	u-boot,dm-spl;
+};
+
+&usb1 {
+	u-boot,dm-spl;
+	dr_mode = "peripheral";
+};
+
+&usb2_phy1 {
+	u-boot,dm-spl;
+};
+
+&usb3_phy1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra76-evm.dts b/roms/u-boot/arch/arm/dts/dra76-evm.dts
new file mode 100644
index 000000000..e3da17ac9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra76-evm.dts
@@ -0,0 +1,388 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI DRA762 EVM";
+	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	vsys_12v0: fixedregulator-vsys12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of Cntlr B of TPS43351-Q1 on dra76-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vsys_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vio_3v3: fixedregulator-vio_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vio_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vio_3v3>;
+		enable-active-high;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	vio_1v8: fixedregulator-vio_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps5_reg>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&vio_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps65917: tps65917@58 {
+		compatible = "ti,tps65917";
+		reg = <0x58>;
+		ti,system-power-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		tps65917_pmic {
+			compatible = "ti,tps65917-pmic";
+
+			smps12-in-supply = <&vsys_3v3>;
+			smps3-in-supply = <&vsys_3v3>;
+			smps4-in-supply = <&vsys_3v3>;
+			smps5-in-supply = <&vsys_3v3>;
+			ldo1-in-supply = <&vsys_3v3>;
+			ldo2-in-supply = <&vsys_3v3>;
+			ldo3-in-supply = <&vsys_5v0>;
+			ldo4-in-supply = <&vsys_5v0>;
+			ldo5-in-supply = <&vsys_3v3>;
+
+			tps65917_regulators: regulators {
+				smps12_reg: smps12 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_CORE */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				smps4_reg: smps4 {
+					/* VDD_IVA */
+					regulator-name = "smps4";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps5_reg: smps5 {
+					/* VDDS1V8 */
+					regulator-name = "smps5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> VDA_PHY1_1V8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+
+				ldo2_reg: ldo2 {
+					/* LDO2_OUT --> VDA_PHY2_1V8 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-allow-bypass;
+					regulator-always-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDA_USB_3V3 */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDD_SDIO_DV */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps65917_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps65917>;
+			interrupts = <1 IRQ_TYPE_NONE>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <6>;
+		};
+	};
+
+	lp87565: lp87565@60 {
+		compatible = "ti,lp87565-q1";
+		reg = <0x60>;
+
+		buck10-in-supply =<&vsys_3v3>;
+		buck23-in-supply =<&vsys_3v3>;
+
+		regulators: regulators {
+			buck10_reg: buck10 {
+				/*VDD_MPU*/
+				regulator-name = "buck10";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck23_reg: buck23 {
+				/* VDD_GPU*/
+				regulator-name = "buck23";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcf_lcd: pcf8757@20 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	pcf_gpio_21: pcf8757@21 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcf_hdmi: pcf8575@26 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vio_3v3>;
+		IOVDD-supply = <&vio_3v3>;
+		DRVDD-supply = <&vio_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&buck10_reg>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vio_3v3_sd>;
+	vqmmc-supply = <&ldo4_reg>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is always hardwired.
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vio_1v8>;
+	bus-width = <8>;
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_default>;
+	pinctrl-2 = <&mmc2_pins_default>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
+};
+
+/* No RTC on this device */
+&rtc {
+	status = "disabled";
+};
+
+&mac {
+	status = "okay";
+
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo3_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo3_reg>;
+};
+
+&qspi {
+	spi-max-frequency = <96000000>;
+	m25p80@0 {
+		spi-max-frequency = <96000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra76x-mmc-iodelay.dtsi b/roms/u-boot/arch/arm/dts/dra76x-mmc-iodelay.dtsi
new file mode 100644
index 000000000..fdca48186
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra76x-mmc-iodelay.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Texas Instruments
+// MMC IOdelay values for TI's DRA76x and AM576x SoCs.
+// Author: Sekhar Nori <nsekhar@ti.com>
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018
+ *
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50: mmc1_pins_ddr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins_default: mmc3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc4_pins_hs: mmc4_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_conf: mmc1_iodelay_ddr_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(489) G_DELAY_PS(0)	/* CFG_MMC1_CLK_IN */
+			0x624 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x630 A_DELAY_PS(374) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x63c A_DELAY_PS(31) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x648 A_DELAY_PS(56) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x620 A_DELAY_PS(1355) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(4)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_conf: mmc1_iodelay_sdr104_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(892) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(384) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(350) G_DELAY_PS(174)	/* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(410) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(335) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(468) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(339) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(676) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(219) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154)	/* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(640) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(356) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(579) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(435) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(236) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(759) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(372) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(0) G_DELAY_PS(386)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(605) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(171) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(221) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(474) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL2 in datamanual */
+	mmc3_iodelay_sdr50_conf: mmc3_iodelay_sdr50_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(852) G_DELAY_PS(0)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(94) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(122) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(57) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(375) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_manual1_conf: mmc4_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(1147) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1834) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(2165) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1929) G_DELAY_PS(64)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1935) G_DELAY_PS(128)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(2172) G_DELAY_PS(44)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_default_conf: mmc4_iodelay_default_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(307) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(785) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(613) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(683) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(835) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dra76x.dtsi b/roms/u-boot/arch/arm/dts/dra76x.dtsi
new file mode 100644
index 000000000..1c88c581f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra76x.dtsi
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+	compatible = "ti,dra762", "ti,dra7";
+
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+	ti,irqs-skip = <10 67 68 133 139 140>;
+};
diff --git a/roms/u-boot/arch/arm/dts/dra7xx-clocks.dtsi b/roms/u-boot/arch/arm/dts/dra7xx-clocks.dtsi
new file mode 100644
index 000000000..cf229dfab
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dra7xx-clocks.dtsi
@@ -0,0 +1,2216 @@
+/*
+ * Device Tree Source for DRA7xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon_clocks {
+	atl_clkin0_ck: atl_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
+	};
+
+	atl_clkin1_ck: atl_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
+	};
+
+	atl_clkin2_ck: atl_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
+	};
+
+	atl_clkin3_ck: atl_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
+	};
+
+	hdmi_clkin_ck: hdmi_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlb_clkin_ck: mlb_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlbp_clkin_ck: mlbp_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	ref_clkin0_ck: ref_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin1_ck: ref_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin2_ck: ref_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin3_ck: ref_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	rmii_clk_ck: rmii_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	sdvenc_clkin_ck: sdvenc_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <610>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	sys_clkin2: sys_clkin2 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22579200>;
+	};
+
+	usb_otg_clkin_ck: usb_otg_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_clkin_ck: video1_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_m2_clkin_ck: video1_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_clkin_ck: video2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_m2_clkin_ck: video2_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck@1e0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_clk: abe_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_byp_mux: dpll_core_byp_mux@12c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck@120 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,omap5-mpu-dpll-clock";
+		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dclk_div: mpu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0240>;
+	};
+
+	dpll_dsp_ck: dpll_dsp_ck@234 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
+		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+		assigned-clocks = <&dpll_dsp_ck>;
+		assigned-clock-rates = <600000000>;
+	};
+
+	dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0244>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_dsp_m2_ck>;
+		assigned-clock-rates = <600000000>;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck@1a0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+		assigned-clocks = <&dpll_iva_ck>;
+		assigned-clock-rates = <1165000000>;
+	};
+
+	dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_iva_m2_ck>;
+		assigned-clock-rates = <388333334>;
+	};
+
+	iva_dclk: iva_dclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_iva_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02e4>;
+	};
+
+	dpll_gpu_ck: dpll_gpu_ck@2d8 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
+		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+		assigned-clocks = <&dpll_gpu_ck>;
+		assigned-clock-rates = <1277000000>;
+	};
+
+	dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02e8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_gpu_m2_ck>;
+		assigned-clock-rates = <425666667>;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x021c>;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
+		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0220>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02b4>;
+	};
+
+	dpll_gmac_ck: dpll_gmac_ck@2a8 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
+		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
+	};
+
+	dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	video2_dclk_div: video2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_dclk_div: video1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_dclk_div: hdmi_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0290>;
+	};
+
+	dpll_eve_ck: dpll_eve_ck@284 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
+		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
+	};
+
+	dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_eve_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0294>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	eve_dclk_div: eve_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_eve_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0228>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_dsp_ck>;
+	};
+
+	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0248>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_dsp_m3x2_ck>;
+		assigned-clock-rates = <400000000>;
+	};
+
+	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_gmac_ck>;
+	};
+
+	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	gmii_m_clk_div: gmii_m_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_gmac_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hdmi_clk2_div: hdmi_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_div_clk: hdmi_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_iclk_div: l3_iclk_div@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x0100>;
+		clocks = <&dpll_core_h12x2_ck>;
+		ti,index-power-of-two;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	video1_clk2_div: video1_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_div_clk: video1_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_clk2_div: video2_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_div_clk: video2_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0520>;
+		assigned-clocks = <&ipu1_gfclk_mux>;
+		assigned-clock-parents = <&dpll_core_h22x2_ck>;
+	};
+
+	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux@550 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux@550 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0550>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux@558 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux@560 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0560>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux@568 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux@570 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	uart6_gfclk_mux: uart6_gfclk_mux@580 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin1: sys_clkin1@110 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0118>;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x0114>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	abe_24m_fclk: abe_24m_fclk@11c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x011c>;
+		ti,dividers = <8>, <16>;
+	};
+
+	aess_fclk: aess_fclk@178 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		reg = <0x0178>;
+		ti,max-div = <2>;
+	};
+
+	abe_giclk_div: abe_giclk_div@174 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		reg = <0x0174>;
+		ti,max-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div@1d8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x01d8>;
+		ti,dividers = <16>, <32>;
+	};
+
+	abe_sys_clk_div: abe_sys_clk_div@120 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0120>;
+		ti,max-div = <2>;
+	};
+
+	adc_gfclk_mux: adc_gfclk_mux@1dc {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
+		reg = <0x01dc>;
+	};
+
+	sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c8>;
+		ti,index-power-of-two;
+	};
+
+	sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin2>;
+		ti,max-div = <64>;
+		reg = <0x01cc>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01bc>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gclk_div: dsp_gclk_div@18c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x018c>;
+		ti,index-power-of-two;
+	};
+
+	gpu_dclk: gpu_dclk@1a0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01a0>;
+		ti,index-power-of-two;
+	};
+
+	emif_phy_dclk_div: emif_phy_dclk_div@190 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0190>;
+		ti,index-power-of-two;
+	};
+
+	gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	gmac_main_clk: gmac_main_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gmac_250m_dclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01ac>;
+		ti,index-power-of-two;
+	};
+
+	usb_otg_dclk_div: usb_otg_dclk_div@184 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&usb_otg_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0184>;
+		ti,index-power-of-two;
+	};
+
+	sata_dclk_div: sata_dclk_div@1c0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c0>;
+		ti,index-power-of-two;
+	};
+
+	pcie2_dclk_div: pcie2_dclk_div@1b8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b8>;
+		ti,index-power-of-two;
+	};
+
+	pcie_dclk_div: pcie_dclk_div@1b4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b4>;
+		ti,index-power-of-two;
+	};
+
+	emu_dclk_div: emu_dclk_div@194 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x0194>;
+		ti,index-power-of-two;
+	};
+
+	secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&secure_32k_clk_src_ck>;
+		ti,max-div = <64>;
+		reg = <0x01c4>;
+		ti,index-power-of-two;
+	};
+
+	clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0158>;
+	};
+
+	clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x015c>;
+	};
+
+	clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0160>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	eve_clk: eve_clk@180 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
+		reg = <0x0180>;
+	};
+
+	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0164>;
+	};
+
+	mlb_clk: mlb_clk@134 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlb_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0134>;
+		ti,index-power-of-two;
+	};
+
+	mlbp_clk: mlbp_clk@130 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlbp_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0130>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0138>;
+		ti,index-power-of-two;
+	};
+
+	timer_sys_clk_div: timer_sys_clk_div@144 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0144>;
+		ti,max-div = <2>;
+	};
+
+	video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0168>;
+	};
+
+	video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x016c>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk@1838 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dcan1_sys_clk_mux: dcan1_sys_clk_mux@1888 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux@1840 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart10_gfclk_mux: uart10_gfclk_mux@1880 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1880>;
+	};
+};
+&cm_core_clocks {
+	dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin1>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c 0x4>;
+		ti,bit-shift = <7>;
+	};
+
+	apll_pcie_ck: apll_pcie_ck@21c {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-apll-clock";
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
+	};
+
+	optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <8>;
+	};
+
+	optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 {
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b8>;
+		ti,bit-shift = <8>;
+	};
+
+	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c>;
+		ti,dividers = <2>, <1>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+	};
+
+	optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <9>;
+	};
+
+	optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 {
+		compatible = "ti,gate-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b8>;
+		ti,bit-shift = <9>;
+	};
+
+	optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&optfclk_pciephy_div>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <10>;
+	};
+
+	optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 {
+		compatible = "ti,gate-clock";
+		clocks = <&optfclk_pciephy_div>;
+		#clock-cells = <0>;
+		reg = <0x13b8>;
+		ti,bit-shift = <10>;
+	};
+
+	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_m2_ck: apll_pcie_m2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_per_byp_mux: dpll_per_byp_mux@14c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
+	dpll_usb_ck: dpll_usb_ck@180 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk@104 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	clkout2_clk: clkout2_clk@6b0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkoutmux2_clk_mux>;
+		ti,bit-shift = <8>;
+		reg = <0x06b0>;
+	};
+
+	l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x06c0>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk@1120 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk@1120 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk@1120 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+		ti,set-rate-parent;
+	};
+
+	dss_hdmi_clk: dss_hdmi_clk@1120 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&hdmi_dpll_clk_mux>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_video1_clk: dss_video1_clk@1120 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video1_dpll_clk_mux>;
+		ti,bit-shift = <12>;
+		reg = <0x1120>;
+	};
+
+	dss_video2_clk: dss_video2_clk@1120 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video2_dpll_clk_mux>;
+		ti,bit-shift = <13>;
+		reg = <0x1120>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk@1760 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1760>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk@1768 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1768>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk@1770 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1770>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk@1778 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1778>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk@1780 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1780>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk@1810 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1810>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk@1818 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1818>;
+	};
+
+	mmc1_clk32k: mmc1_clk32k@1328 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1328>;
+	};
+
+	mmc2_clk32k: mmc2_clk32k@1330 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1330>;
+	};
+
+	mmc3_clk32k: mmc3_clk32k@1820 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1820>;
+	};
+
+	mmc4_clk32k: mmc4_clk32k@1828 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1828>;
+	};
+
+	sata_ref_clk: sata_ref_clk@1388 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin1>;
+		ti,bit-shift = <8>;
+		reg = <0x1388>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@13f0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_960m_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x13f0>;
+	};
+
+	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m@1340 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_960m_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1340>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0688>;
+	};
+
+	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0698>;
+	};
+
+	atl_dpll_clk_mux: atl_dpll_clk_mux@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0c00>;
+	};
+
+	atl_gfclk_mux: atl_gfclk_mux@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
+		ti,bit-shift = <26>;
+		reg = <0x0c00>;
+	};
+
+	rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x13d0>;
+	};
+
+	gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
+		ti,bit-shift = <25>;
+		reg = <0x13d0>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+		assigned-clocks = <&gpu_core_gclk_mux>;
+		assigned-clock-parents = <&dpll_gpu_m2_ck>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x1220>;
+		assigned-clocks = <&gpu_hyd_gclk_mux>;
+		assigned-clock-parents = <&dpll_gpu_m2_ck>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0e50>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux@1860 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux@1860 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux@1860 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1860>;
+	};
+
+	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux@1868 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1868>;
+	};
+
+	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1868>;
+	};
+
+	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux@1898 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1898>;
+	};
+
+	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux@1898 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1898>;
+	};
+
+	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux@1878 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1878>;
+	};
+
+	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux@1878 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1878>;
+	};
+
+	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux@1904 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1904>;
+	};
+
+	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux@1904 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1904>;
+	};
+
+	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux@1908 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1908>;
+	};
+
+	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux@1908 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1908>;
+	};
+
+	mcasp8_ahclkx_mux: mcasp8_ahclkx_mux@1890 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <22>;
+		reg = <0x1890>;
+	};
+
+	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux@1890 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <24>;
+		reg = <0x1890>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux@1328 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	mmc1_fclk_div: mmc1_fclk_div@1328 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1328>;
+		ti,index-power-of-two;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux@1330 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	mmc2_fclk_div: mmc2_fclk_div@1330 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1330>;
+		ti,index-power-of-two;
+	};
+
+	mmc3_gfclk_mux: mmc3_gfclk_mux@1820 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1820>;
+	};
+
+	mmc3_gfclk_div: mmc3_gfclk_div@1820 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc3_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1820>;
+		ti,index-power-of-two;
+	};
+
+	mmc4_gfclk_mux: mmc4_gfclk_mux@1828 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1828>;
+	};
+
+	mmc4_gfclk_div: mmc4_gfclk_div@1828 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc4_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1828>;
+		ti,index-power-of-two;
+	};
+
+	qspi_gfclk_mux: qspi_gfclk_mux@1838 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1838>;
+	};
+
+	qspi_gfclk_div: qspi_gfclk_div@1838 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&qspi_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1838>;
+		ti,index-power-of-two;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux@1728 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1728>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux@1730 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1730>;
+	};
+
+	timer13_gfclk_mux: timer13_gfclk_mux@17c8 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17c8>;
+	};
+
+	timer14_gfclk_mux: timer14_gfclk_mux@17d0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d0>;
+	};
+
+	timer15_gfclk_mux: timer15_gfclk_mux@17d8 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d8>;
+	};
+
+	timer16_gfclk_mux: timer16_gfclk_mux@1830 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1830>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux@1738 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1738>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux@1740 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1740>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux@1748 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1748>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux@1750 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1750>;
+	};
+
+	uart1_gfclk_mux: uart1_gfclk_mux@1840 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart2_gfclk_mux: uart2_gfclk_mux@1848 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1848>;
+	};
+
+	uart3_gfclk_mux: uart3_gfclk_mux@1850 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1850>;
+	};
+
+	uart4_gfclk_mux: uart4_gfclk_mux@1858 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+	};
+
+	uart5_gfclk_mux: uart5_gfclk_mux@1870 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1870>;
+	};
+
+	uart7_gfclk_mux: uart7_gfclk_mux@18d0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18d0>;
+	};
+
+	uart8_gfclk_mux: uart8_gfclk_mux@18e0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e0>;
+	};
+
+	uart9_gfclk_mux: uart9_gfclk_mux@18e8 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e8>;
+	};
+
+	vip1_gclk_mux: vip1_gclk_mux@1020 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1020>;
+	};
+
+	vip2_gclk_mux: vip2_gclk_mux@1028 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	vip3_gclk_mux: vip3_gclk_mux@1030 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+};
+
+&cm_core_clockdomains {
+	coreaon_clkdm: coreaon_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+
+&scm_conf_clocks {
+	dss_deshdcp_clk: dss_deshdcp_clk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_iclk_div>;
+		ti,bit-shift = <0>;
+		reg = <0x558>;
+	};
+
+       ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <20>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <21>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0558>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x6c4>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dragonboard410c-uboot.dtsi b/roms/u-boot/arch/arm/dts/dragonboard410c-uboot.dtsi
new file mode 100644
index 000000000..9c1be2566
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dragonboard410c-uboot.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot addition to handle Dragonboard 410c pins
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ */
+
+/ {
+
+	smem {
+		u-boot,dm-pre-reloc;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+
+		qcom,tlmm@1000000 {
+			u-boot,dm-pre-reloc;
+
+			uart {
+				u-boot,dm-pre-reloc;
+			};
+		};
+
+		qcom,gcc@1800000 {
+			u-boot,dm-pre-reloc;
+		};
+
+		serial@78b0000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+
+&pm8916_gpios {
+	usb_hub_reset_pm {
+		gpios = <&pm8916_gpios 2 0>;
+	};
+
+	usb_sw_sel_pm {
+		gpios = <&pm8916_gpios 3 0>;
+	};
+};
+
+
+&pm8916_pon {
+	key_vol_down {
+		gpios = <&pm8916_pon 1 0>;
+	};
+
+	key_power {
+		gpios = <&pm8916_pon 0 0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dragonboard410c.dts b/roms/u-boot/arch/arm/dts/dragonboard410c.dts
new file mode 100644
index 000000000..fa348bc62
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dragonboard410c.dts
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm APQ8016 based Dragonboard 410C board device tree source
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "skeleton64.dtsi"
+#include <dt-bindings/pinctrl/pinctrl-snapdragon.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. Dragonboard 410c";
+	compatible = "qcom,dragonboard", "qcom,apq8016-sbc";
+	qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
+	qcom,board-id = <0x10018 0x0>;
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+
+	aliases {
+		usb0 = "/soc/ehci@78d9000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x3da00000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_mem: smem_region@86300000 {
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	chosen {
+		stdout-path = "/soc/serial@78b0000";
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+	};
+
+	soc {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges = <0x0 0x0 0x0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rpm_msg_ram: memory@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x60000 0x8000>;
+		};
+
+		pinctrl: qcom,tlmm@1000000 {
+			compatible = "qcom,tlmm-apq8016";
+			reg = <0x1000000 0x400000>;
+
+			blsp1_uart: uart {
+				function = "blsp1_uart";
+				pins = "GPIO_4", "GPIO_5";
+				drive-strength = <DRIVE_STRENGTH_8MA>;
+				bias-disable;
+			};
+		};
+		clkc: qcom,gcc@1800000 {
+			compatible = "qcom,gcc-apq8016";
+			reg = <0x1800000 0x80000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4";
+			reg = <0x78b0000 0x200>;
+			clock = <&clkc 4>;
+			pinctrl-names = "uart";
+			pinctrl-0 = <&blsp1_uart>;
+		};
+
+		soc_gpios: pinctrl@1000000 {
+			compatible = "qcom,apq8016-pinctrl";
+			reg = <0x1000000 0x300000>;
+			gpio-controller;
+			gpio-count = <122>;
+			gpio-bank-name="soc";
+			#gpio-cells = <1>;
+		};
+
+		ehci@78d9000 {
+			compatible = "qcom,ehci-host";
+			reg = <0x78d9000 0x400>;
+			phys = <&ehci_phy>;
+		};
+
+		ehci_phy: ehci_phy@78d9000 {
+			compatible = "qcom,apq8016-usbphy";
+			reg = <0x78d9000 0x400>;
+			#phy-cells = <0>;
+		};
+
+		sdhci@07824000 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7824900 0x11c 0x7824000 0x800>;
+			bus-width = <0x8>;
+			index = <0x0>;
+			non-removable;
+			clock = <&clkc 0>;
+			clock-frequency = <100000000>;
+		};
+
+		sdhci@07864000 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7864900 0x11c 0x7864000 0x800>;
+			index = <0x1>;
+			bus-width = <0x4>;
+			clock = <&clkc 1>;
+			clock-frequency = <200000000>;
+		};
+
+		wcnss {
+			bt {
+				compatible="qcom,wcnss-bt";
+			};
+
+			wifi {
+				compatible="qcom,wcnss-wlan";
+			};
+		};
+
+		spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x200f800 0x200 0x2400000 0x400000 0x2c00000 0x400000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			pmic0: pm8916@0 {
+				compatible = "qcom,spmi-pmic";
+				reg = <0x0 0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x1>;
+
+				pm8916_pon: pm8916_pon@800 {
+					compatible = "qcom,pm8916-pwrkey";
+					reg = <0x800 0x96>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+
+				pm8916_gpios: pm8916_gpios@c000 {
+					compatible = "qcom,pm8916-gpio";
+					reg = <0xc000 0x400>;
+					gpio-controller;
+					gpio-count = <4>;
+					#gpio-cells = <2>;
+					gpio-bank-name="pmic";
+				};
+			};
+
+			pmic1: pm8916@1 {
+				compatible = "qcom,spmi-pmic";
+				reg = <0x1 0x1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user1 {
+			label = "green:user1";
+			gpios = <&soc_gpios 21 0>;
+		};
+
+		user2 {
+			label = "green:user2";
+			gpios = <&soc_gpios 120 0>;
+		};
+
+		user3 {
+			label = "green:user3";
+			gpios = <&pm8916_gpios 0 0>;
+		};
+
+		user4 {
+			label = "green:user4";
+			gpios = <&pm8916_gpios 1 0>;
+		};
+	};
+};
+
+#include "dragonboard410c-uboot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/dragonboard820c-uboot.dtsi b/roms/u-boot/arch/arm/dts/dragonboard820c-uboot.dtsi
new file mode 100644
index 000000000..8610d7ec3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dragonboard820c-uboot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot addition to handle Dragonboard 820c pins
+ *
+ * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ */
+
+/ {
+	smem {
+		u-boot,dm-pre-reloc;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+
+		qcom,tlmm@1010000 {
+			u-boot,dm-pre-reloc;
+
+			uart {
+				u-boot,dm-pre-reloc;
+			};
+		};
+
+		clock-controller@300000 {
+			u-boot,dm-pre-reloc;
+		};
+
+		serial@75b0000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&pm8994_pon {
+	key_vol_down {
+		gpios = <&pm8994_pon 1 0>;
+		label = "key_vol_down";
+	};
+
+	key_power {
+		gpios = <&pm8994_pon 0 0>;
+		label = "key_power";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/dragonboard820c.dts b/roms/u-boot/arch/arm/dts/dragonboard820c.dts
new file mode 100644
index 000000000..1114ddd7d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/dragonboard820c.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm APQ8096 based Dragonboard 820C board device tree source
+ *
+ * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "skeleton64.dtsi"
+#include <dt-bindings/pinctrl/pinctrl-snapdragon.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. DB820c";
+	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_mem: smem_region@86300000 {
+			reg = <0x0 0x86300000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@300000 {
+			compatible = "qcom,gcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x300000 0x90000>;
+		};
+
+		pinctrl: qcom,tlmm@1010000 {
+			compatible = "qcom,tlmm-apq8096";
+			reg = <0x1010000 0x400000>;
+
+			blsp8_uart: uart {
+				function = "blsp_uart8";
+				pins = "GPIO_4", "GPIO_5";
+				drive-strength = <DRIVE_STRENGTH_8MA>;
+				bias-disable;
+			};
+		};
+
+		blsp2_uart2: serial@75b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x75b0000 0x1000>;
+			clock = <&gcc 4>;
+			pinctrl-names = "uart";
+			pinctrl-0 = <&blsp8_uart>;
+		};
+
+		sdhc2: sdhci@74a4900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
+			index = <0x0>;
+			bus-width = <4>;
+			clock = <&gcc 0>;
+			clock-frequency = <200000000>;
+		 };
+
+		spmi@400f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x400f800 0x200>,
+			      <0x4400000 0x400000>,
+			      <0x4c00000 0x400000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+
+			pmic0: pm8994@0 {
+				compatible = "qcom,spmi-pmic";
+				reg = <0x0 0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x1>;
+
+				pm8994_pon: pm8994_pon@800 {
+					compatible = "qcom,pm8994-pwrkey";
+					reg = <0x800 0x96>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					gpio-bank-name="pm8994_key.";
+				};
+
+				pm8994_gpios: pm8994_gpios@c000 {
+					compatible = "qcom,pm8994-gpio";
+					reg = <0xc000 0x400>;
+					gpio-controller;
+					gpio-count = <24>;
+					#gpio-cells = <2>;
+					gpio-bank-name="pm8994.";
+				};
+			};
+
+			pmic1: pm8994@1 {
+				compatible = "qcom,spmi-pmic";
+				reg = <0x1 0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x1>;
+			};
+		};
+	};
+
+};
+
+#include "dragonboard820c-uboot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/elpida_ecb240abacn.dtsi b/roms/u-boot/arch/arm/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 000000000..d87ee4794
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+	elpida_ECB240ABACN: lpddr2 {
+		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		density		= <2048>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <400000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <200000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <10000>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ethernut5.dts b/roms/u-boot/arch/arm/dts/ethernut5.dts
new file mode 100644
index 000000000..5c24deaf4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ethernut5.dts
@@ -0,0 +1,96 @@
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9xe.dtsi"
+
+/ {
+	model = "Ethernut 5";
+	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			gpios = <0
+				 &pioC 14 GPIO_ACTIVE_HIGH
+				 0
+				>;
+
+			root@0 {
+				label = "root";
+				reg = <0x0 0x08000000>;
+			};
+
+			data@20000 {
+				label = "data";
+				reg = <0x08000000 0x38000000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		pcf8563@50 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ev-imx280-nano-x-mb.dts b/roms/u-boot/arch/arm/dts/ev-imx280-nano-x-mb.dts
new file mode 100644
index 000000000..7aec076af
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ev-imx280-nano-x-mb.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua>
+
+/dts-v1/;
+
+#include "o4-imx6ull-nano.dtsi"
+
+/ {
+	model = "EV-iMX280-NANO-X-MB";
+	compatible = "evodbg,ev-imx280-nano-x-mb",
+		     "out4,o4-imx6ull-nano",
+		     "fsl,imx6ull";
+
+	aliases {
+		mmc1 = &usdhc1;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
+		>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0xb0b0 /* RST */
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usdhc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default";
+	status = "okay";
+	wakeup-source;
+};
+
+&fec1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	phy-reset-duration = <250>;
+	phy-reset-post-delay = <100>;
+	phy-reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_fec1 &pinctrl_mdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			interrupt-parent = <&gpio5>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-0 = <&pinctrl_phy0_irq>;
+			pinctrl-names = "default";
+			reg = <0>;
+		};
+	};
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4.dtsi b/roms/u-boot/arch/arm/dts/exynos4.dtsi
new file mode 100644
index 000000000..61ade443b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4.dtsi
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung's Exynos4 SoC common device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+	};
+
+	combiner: interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0x10440000 0x1000>;
+	};
+
+	gic: interrupt-controller@10490000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		cpu-offset = <0x4000>;
+		reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
+	};
+
+	serial_0: serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x3c>;
+		id = <0>;
+	};
+
+	serail_1: serial@13810000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13810000 0x3c>;
+		id = <1>;
+	};
+
+	serial_2: serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x3c>;
+		id = <2>;
+	};
+
+	serial_3: serial@13830000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13830000 0x3c>;
+		id = <3>;
+	};
+
+	serial_4: serial@13840000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13840000 0x3c>;
+		id = <4>;
+	};
+
+	i2c_0: i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13860000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 56 0>;
+	};
+
+	i2c_1: i2c@13870000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <1 57 0>;
+	};
+
+	i2c_2: i2c@13880000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13880000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <2 58 0>;
+	};
+
+	i2c_3: i2c@13890000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13890000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <3 59 0>;
+	};
+
+	i2c_4: i2c@138a0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138a0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <4 60 0>;
+	};
+
+	i2c_5: i2c@138b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138b0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <5 61 0>;
+	};
+
+	i2c_6: i2c@138c0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138c0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <6 62 0>;
+	};
+
+	i2c_7: i2c@138d0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138d0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <7 63 0>;
+	};
+
+	sdhci0: sdhci@12510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos4412-sdhci";
+		reg = <0x12510000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 75 0>;
+		status = "disabled";
+	};
+
+	sdhci1: sdhci@12520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos4412-sdhci";
+		reg = <0x12520000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 76 0>;
+		status = "disabled";
+	};
+
+	sdhci2: sdhci@12530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos4412-sdhci";
+		reg = <0x12530000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 77 0>;
+		status = "disabled";
+	};
+
+	sdhci3: sdhci@12540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos4412-sdhci";
+		reg = <0x12540000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 78 0>;
+		status = "disabled";
+	};
+
+	mshc_0: dwmmc@12550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos4412-dw-mshc";
+		reg = <0x12550000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 131 0>;
+		status = "disabled";
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4210-origen.dts b/roms/u-boot/arch/arm/dts/exynos4210-origen.dts
new file mode 100644
index 000000000..65a5fcd67
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4210-origen.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung's Exynos4210 based Origen board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "skeleton.dtsi"
+#include "exynos4210.dtsi"
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4210";
+	compatible = "insignal,origen", "samsung,exynos4210";
+
+	chosen {
+		bootargs ="";
+	};
+
+	aliases {
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+	};
+};
+
+&sdhci2 {
+	samsung,bus-width = <4>;
+	samsung,timing = <1 2 3>;
+	cd-gpios = <&gpk2 2 0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi b/roms/u-boot/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi
new file mode 100644
index 000000000..aeeecd628
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions to enable a generic Exynos GPIO driver
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/{
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,exynos4210-pinctrl";
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpx0: gpx0 {
+			reg = <0xc00 0x20>;
+		};
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4210-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/exynos4210-pinctrl.dtsi
new file mode 100644
index 000000000..bda17f79f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4210-pinctrl.dtsi
@@ -0,0 +1,304 @@
+/*
+ * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2011-2012 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe2: gpe2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe3: gpe3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe4: gpe4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pinctrl@11000000 {
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4210-smdkv310.dts b/roms/u-boot/arch/arm/dts/exynos4210-smdkv310.dts
new file mode 100644
index 000000000..fa488c151
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4210-smdkv310.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung's Exynos4210-based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/dts-v1/;
+#include "exynos4.dtsi"
+
+/ {
+	model = "Samsung SMDKV310 on Exynos4210";
+	compatible = "samsung,smdkv310", "samsung,exynos4210";
+
+	aliases {
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4210-trats.dts b/roms/u-boot/arch/arm/dts/exynos4210-trats.dts
new file mode 100644
index 000000000..05989ee97
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4210-trats.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung's Exynos4210 based Trats board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Trats based on Exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210";
+
+	config {
+		samsung,dsim-device-name = "s6e8ax0";
+	};
+
+	aliases {
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+		i2c8 = &i2c_fg;
+	};
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos-fimd";
+		reg = <0x11c00000 0xa4>;
+
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <720>;
+		samsung,vl-row = <1280>;
+		samsung,vl-width = <720>;
+		samsung,vl-height = <1280>;
+
+		samsung,vl-clkp = <0>;
+		samsung,vl-oep = <0>;
+		samsung,vl-hsp = <1>;
+		samsung,vl-vsp = <1>;
+		samsung,vl-dp = <1>;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <5>;
+		samsung,vl-hbpd = <10>;
+		samsung,vl-hfpd = <10>;
+		samsung,vl-vspw = <2>;
+		samsung,vl-vbpd = <1>;
+		samsung,vl-vfpd = <13>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,power-on-delay = <30>;
+		samsung,interface-mode = <1>;
+		samsung,mipi-enabled = <1>;
+		samsung,dp-enabled;
+		samsung,dual-lcd-enabled;
+
+		samsung,logo-on = <1>;
+		samsung,resolution = <0>;
+		samsung,rgb-mode = <0>;
+	};
+
+	mipidsi@11c80000 {
+		compatible = "samsung,exynos-mipi-dsi";
+		reg = <0x11c80000 0x5c>;
+
+		samsung,dsim-config-e-interface = <1>;
+		samsung,dsim-config-e-virtual-ch = <0>;
+		samsung,dsim-config-e-pixel-format = <7>;
+		samsung,dsim-config-e-burst-mode = <1>;
+		samsung,dsim-config-e-no-data-lane = <3>;
+		samsung,dsim-config-e-byte-clk = <0>;
+		samsung,dsim-config-hfp = <1>;
+
+		samsung,dsim-config-p = <3>;
+		samsung,dsim-config-m = <120>;
+		samsung,dsim-config-s = <1>;
+
+		samsung,dsim-config-pll-stable-time = <500>;
+		samsung,dsim-config-esc-clk = <20000000>;
+		samsung,dsim-config-stop-holding-cnt = <0x7ff>;
+		samsung,dsim-config-bta-timeout = <0xff>;
+		samsung,dsim-config-rx-timeout = <0xffff>;
+
+		samsung,dsim-device-id = <0xffffffff>;
+		samsung,dsim-device-bus-id = <0>;
+
+		samsung,dsim-device-reverse-panel = <1>;
+	};
+
+	i2c_fg: fuel-gauge {
+		compatible = "i2c-gpio";
+		gpios = <&gpy4 1 0>,	/* sda */
+			<&gpy4 0 0>;	/* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		status = "okay";
+	};
+};
+
+&i2c_5 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	max8997-pmic@66 {
+		compatible = "maxim,max8997";
+		reg = <0x66 0 0>;
+		voltage-regulators {
+			valive_reg: LDO2 {
+			     regulator-name = "VALIVE_1.1V_C210";
+			     regulator-min-microvolt = <1100000>;
+			     regulator-max-microvolt = <1100000>;
+			     regulator-always-on;
+			};
+
+			vusb_reg: LDO3 {
+			     regulator-name = "VUSB_1.1V_C210";
+			     regulator-min-microvolt = <1100000>;
+			     regulator-max-microvolt = <1100000>;
+			};
+
+			vmipi_reg: LDO4 {
+			     regulator-name = "VMIPI_1.8V";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			};
+
+			vpda_reg: LDO6 {
+			     regulator-name = "VCC_1.8V_PDA";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			     regulator-always-on;
+			};
+
+			vcam_reg: LDO7 {
+			     regulator-name = "CAM_ISP_1.8V";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			};
+
+			vusbdac_reg: LDO8 {
+			     regulator-name = "VUSB+VDAC_3.3V_C210";
+			     regulator-min-microvolt = <3300000>;
+			     regulator-max-microvolt = <3300000>;
+			};
+
+			vccpda_reg: LDO9 {
+			     regulator-name = "VCC_2.8V_PDA";
+			     regulator-min-microvolt = <2800000>;
+			     regulator-max-microvolt = <2800000>;
+			     regulator-always-on;
+			};
+
+			vpll_reg: LDO10 {
+			     regulator-name = "VPLL_1.1V_C210";
+			     regulator-min-microvolt = <1100000>;
+			     regulator-max-microvolt = <1100000>;
+			     regulator-always-on;
+			};
+
+			vtcam_reg: LDO12 {
+			     regulator-name = "VT_CAM_1.8V";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			};
+
+			vcclcd_reg: LDO13 {
+			     regulator-name = "VCC_3.3V_LCD";
+			     regulator-min-microvolt = <3300000>;
+			     regulator-max-microvolt = <3300000>;
+			};
+
+			vlcd_reg: LDO15 {
+			     regulator-name = "VLCD_2.2V";
+			     regulator-min-microvolt = <2200000>;
+			     regulator-max-microvolt = <2200000>;
+			};
+
+			camsensor_reg: LDO16 {
+			     regulator-name = "CAM_SENSOR_IO_1.8V";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			};
+
+			vddq_reg: LDO21 {
+			     regulator-name = "VDDQ_M1M2_1.2V";
+			     regulator-min-microvolt = <1200000>;
+			     regulator-max-microvolt = <1200000>;
+			     regulator-always-on;
+			};
+
+			varm_breg: BUCK1 {
+			     /*
+			      * HACK: The real name is VARM_1.2V_C210,
+			      * but exynos-cpufreq does not support
+			      * DT-based regulator lookup yet.
+			      */
+			     regulator-name = "vdd_arm";
+			     regulator-min-microvolt = <900000>;
+			     regulator-max-microvolt = <1350000>;
+			     regulator-always-on;
+			};
+
+			vint_breg: BUCK2 {
+			     regulator-name = "VINT_1.1V_C210";
+			     regulator-min-microvolt = <900000>;
+			     regulator-max-microvolt = <1100000>;
+			     regulator-always-on;
+			};
+
+			camisp_breg: BUCK4 {
+			     regulator-name = "CAM_ISP_CORE_1.2V";
+			     regulator-min-microvolt = <1200000>;
+			     regulator-max-microvolt = <1200000>;
+			};
+
+			vmem_breg: BUCK5 {
+			     regulator-name = "VMEM_1.2V_C210";
+			     regulator-min-microvolt = <1200000>;
+			     regulator-max-microvolt = <1200000>;
+			     regulator-always-on;
+			};
+
+			vccsub_breg: BUCK7 {
+			     regulator-name = "VCC_SUB_2.0V";
+			     regulator-min-microvolt = <2000000>;
+			     regulator-max-microvolt = <2000000>;
+			     regulator-always-on;
+			};
+
+			safe1_sreg: ESAFEOUT1 {
+			     regulator-name = "SAFEOUT1";
+			};
+
+			safe2_sreg: ESAFEOUT2 {
+			     regulator-name = "SAFEOUT2";
+			     regulator-boot-on;
+			};
+		};
+	};
+};
+
+&sdhci0 {
+	samsung,bus-width = <8>;
+	samsung,timing = <1 3 3>;
+	pwr-gpios = <&gpk0 2 0>;
+	status = "okay";
+};
+
+&sdhci2 {
+	samsung,bus-width = <4>;
+	samsung,timing = <1 2 3>;
+	cd-gpios = <&gpx3 4 0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4210-universal_c210.dts b/roms/u-boot/arch/arm/dts/exynos4210-universal_c210.dts
new file mode 100644
index 000000000..610a8ad2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4210-universal_c210.dts
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung's Exynos4210 based Universal C210 board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Universal C210 based on Exynos4210 rev0";
+	compatible = "samsung,universal_c210", "samsung,exynos4210";
+
+	aliases {
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+	};
+
+	soft-spi {
+		compatible = "spi-gpio";
+		cs-gpios = <&gpy4 3 0>;
+		gpio-sck = <&gpy3 1 0>;
+		gpio-mosi = <&gpy3 3 0>;
+		gpio-miso = <&gpy3 0 0>;
+		spi-delay-us = <1>;
+		cs@0 {
+		};
+	};
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos-fimd";
+		reg = <0x11c00000 0xa4>;
+
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <480>;
+		samsung,vl-row = <800>;
+		samsung,vl-width = <480>;
+		samsung,vl-height = <800>;
+
+		samsung,vl-clkp = <0>;
+		samsung,vl-oep = <0>;
+		samsung,vl-hsp = <1>;
+		samsung,vl-vsp = <1>;
+		samsung,vl-dp = <1>;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <2>;
+		samsung,vl-hbpd = <16>;
+		samsung,vl-hfpd = <16>;
+		samsung,vl-vspw = <2>;
+		samsung,vl-vbpd = <8>;
+		samsung,vl-vfpd = <8>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,pclk_name = <1>;
+		samsung,sclk_div = <1>;
+
+		samsung,winid = <0>;
+		samsung,power-on-delay = <10000>;
+		samsung,interface-mode = <1>;
+		samsung,mipi-enabled = <0>;
+		samsung,dp-enabled;
+		samsung,dual-lcd-enabled;
+
+		samsung,logo-on = <1>;
+		samsung,resolution = <0>;
+		samsung,rgb-mode = <0>;
+	};
+};
+
+&i2c_5 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	max8998-pmic@66 {
+		compatible = "maxim,max8998";
+		reg = <0x66 0 0>;
+		voltage-regulators {
+			ldo2_reg: LDO2 {
+				regulator-name = "VALIVE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VUSB+MIPI_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VLCD+VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VCC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "CAM_AF_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "PS_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VHIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "CAM_I_HOST_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "CAM_S_ANA_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VINT_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VG3D_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VCC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ap32khz_reg: EN32KHz-AP {
+				regulator-name = "32KHz AP";
+				regulator-always-on;
+			};
+
+			cp32khz_reg: EN32KHz-CP {
+				regulator-name = "32KHz CP";
+			};
+
+			vichg_reg: ENVICHG {
+				regulator-name = "VICHG";
+			};
+
+			safeout1_reg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safeout2_reg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&sdhci0 {
+	samsung,bus-width = <8>;
+	samsung,timing = <1 3 3>;
+	pwr-gpios = <&gpk0 2 0>;
+	status = "okay";
+};
+
+&sdhci2 {
+	samsung,bus-width = <4>;
+	samsung,timing = <1 2 3>;
+	cd-gpios = <&gpx3 4 0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4210.dtsi b/roms/u-boot/arch/arm/dts/exynos4210.dtsi
new file mode 100644
index 000000000..b04a86b82
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4210.dtsi
@@ -0,0 +1,160 @@
+/*
+ * Samsung's Exynos4210 SoC device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4.dtsi"
+#include "exynos4210-pinctrl.dtsi"
+#include "exynos4210-pinctrl-uboot.dtsi"
+
+/ {
+	compatible = "samsung,exynos4210";
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+	};
+
+	pd_lcd1: lcd1-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+	};
+
+	gic: interrupt-controller@10490000 {
+		cpu-offset = <0x8000>;
+	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &gic 0 57 0>,
+					<1 &gic 0 69 0>,
+					<2 &combiner 12 6>,
+					<3 &combiner 12 7>,
+					<4 &gic 0 42 0>,
+					<5 &gic 0 48 0>;
+		};
+	};
+
+	clock: clock-controller@10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>, <3 2>;
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,exynos4210-pinctrl";
+		reg = <0x11400000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 47 0>;
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,exynos4210-pinctrl";
+		reg = <0x11000000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,exynos4210-pinctrl";
+		reg = <0x03860000 0x1000>;
+	};
+
+	tmu@100C0000 {
+		compatible = "samsung,exynos4210-tmu";
+		interrupt-parent = <&combiner>;
+		reg = <0x100C0000 0x100>;
+		interrupts = <2 4>;
+		clocks = <&clock 383>;
+		clock-names = "tmu_apbif";
+		status = "disabled";
+	};
+
+	g2d@12800000 {
+		compatible = "samsung,s5pv210-g2d";
+		reg = <0x12800000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 89 0>;
+		clocks = <&clock 177>, <&clock 277>;
+		clock-names = "sclk_fimg2d", "fimg2d";
+		status = "disabled";
+	};
+
+	camera {
+		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+		fimc_0: fimc@11800000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,cam-if;
+		};
+
+		fimc_1: fimc@11810000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,cam-if;
+		};
+
+		fimc_2: fimc@11820000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,lcd-wb;
+		};
+
+		fimc_3: fimc@11830000 {
+			samsung,pix-limits = <1920 8192 1366 1920>;
+			samsung,rotators = <0>;
+			samsung,mainscaler-ext;
+			samsung,lcd-wb;
+		};
+	};
+};
+
+&combiner {
+	samsung,combiner-nr = <16>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4412-odroid.dts b/roms/u-boot/arch/arm/dts/exynos4412-odroid.dts
new file mode 100644
index 000000000..ce08e8dc1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4412-odroid.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Odroid-U3/X2 board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+	model = "Odroid based on Exynos4412";
+	compatible = "samsung,odroid", "samsung,exynos4412";
+
+	aliases {
+		serial0 = "/serial@13800000";
+		console = "/serial@13810000";
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci2;
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	ehci@12580000 {
+		compatible = "samsung,exynos-ehci";
+		reg = <0x12580000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		phy {
+			compatible = "samsung,exynos-usb-phy";
+			reg = <0x125B0000 0x100>;
+		};
+	};
+
+	emmc-reset {
+		compatible = "samsung,emmc-reset";
+		reset-gpio = <&gpk1 2 0>;
+	};
+};
+
+&i2c_0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	max77686: max77686_pmic@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <7 0>;
+		reg = <0x09 0 0>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_VM1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_MMC2_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDDQ_MMC0/1/3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VMPLL_1.0V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD_MIPI/HDMI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD_MIPI/HDMI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_ABB1_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_UOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_C2C_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD_ABB02_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD_HSIC/OTG_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD_HSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDQ_CAM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDDQ_EMMC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "TFLASH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDDQ_EMMC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-compatible = "LDO25";
+				regulator-name = "VDDQ_LCD_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_1.0V";
+				regulator-min-microvolt = <8500000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT_1.1V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDDQ_AP_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VCC_INL1/7_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VCC_INL2/3/5_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VCC_P3V3_2.85V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&sdhci2 {
+	samsung,bus-width = <4>;
+	samsung,timing = <1 2 3>;
+	cd-inverted;
+	cd-gpios = <&gpk2 2 0>;
+	status = "okay";
+};
+
+&mshc_0 {
+	samsung,bus-width = <8>;
+	samsung,timing = <2 1 0>;
+	samsung,removable = <0>;
+	fifoth_val = <0x203f0040>;
+	bus_hz = <400000000>;
+	div = <0x3>;
+	index = <4>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4412-trats2.dts b/roms/u-boot/arch/arm/dts/exynos4412-trats2.dts
new file mode 100644
index 000000000..c4db137e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4412-trats2.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung's Exynos4412 based Trats2 board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+	model = "Samsung Trats2 based on Exynos4412";
+	compatible = "samsung,trats2", "samsung,exynos4412";
+
+	config {
+		samsung,dsim-device-name = "s6e8ax0";
+	};
+
+	aliases {
+		i2c8 = &i2c_fg;
+		i2c9 = &i2c_max77693;
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+		mmc0 = &mshc_0;
+		mmc1 = &sdhci2;
+	};
+
+	i2c_fg: fuel-gauge {
+		compatible = "i2c-gpio";
+		gpios = <&gpf1 5 0>,	/* sda */
+			<&gpf1 4 0>;	/* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		status = "okay";
+	};
+
+	i2c_max77693: max77693 {
+		compatible = "i2c-gpio";
+		gpio = <&gpm2 0 0>,	/* sda */
+		       <&gpm2 1 0>;	/* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		status = "okay";
+	};
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos-fimd";
+		reg = <0x11c00000 0xa4>;
+
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <720>;
+		samsung,vl-row = <1280>;
+		samsung,vl-width = <720>;
+		samsung,vl-height = <1280>;
+
+		samsung,vl-clkp = <0>;
+		samsung,vl-oep = <0>;
+		samsung,vl-hsp = <1>;
+		samsung,vl-vsp = <1>;
+		samsung,vl-dp = <1>;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <5>;
+		samsung,vl-hbpd = <10>;
+		samsung,vl-hfpd = <10>;
+		samsung,vl-vspw = <2>;
+		samsung,vl-vbpd = <1>;
+		samsung,vl-vfpd = <13>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <0>;
+		samsung,power-on-delay = <30>;
+		samsung,interface-mode = <1>;
+		samsung,mipi-enabled = <1>;
+		samsung,dp-enabled;
+		samsung,dual-lcd-enabled;
+
+		samsung,logo-on = <1>;
+		samsung,resolution = <0>;
+		samsung,rgb-mode = <0>;
+	};
+
+	mipidsi@11c80000 {
+		compatible = "samsung,exynos-mipi-dsi";
+		reg = <0x11c80000 0x5c>;
+
+		samsung,dsim-config-e-interface = <1>;
+		samsung,dsim-config-e-virtual-ch = <0>;
+		samsung,dsim-config-e-pixel-format = <7>;
+		samsung,dsim-config-e-burst-mode = <1>;
+		samsung,dsim-config-e-no-data-lane = <3>;
+		samsung,dsim-config-e-byte-clk = <0>;
+		samsung,dsim-config-hfp = <1>;
+
+		samsung,dsim-config-p = <3>;
+		samsung,dsim-config-m = <120>;
+		samsung,dsim-config-s = <1>;
+
+		samsung,dsim-config-pll-stable-time = <500>;
+		samsung,dsim-config-esc-clk = <20000000>;
+		samsung,dsim-config-stop-holding-cnt = <0x7ff>;
+		samsung,dsim-config-bta-timeout = <0xff>;
+		samsung,dsim-config-rx-timeout = <0xffff>;
+
+		samsung,dsim-device-id = <0xffffffff>;
+		samsung,dsim-device-bus-id = <0>;
+
+		samsung,dsim-device-reverse-panel = <1>;
+	};
+
+	sdhci@12510000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		pwr-gpios = <&gpk0 4 0>;
+		status = "disabled";
+	};
+};
+
+&i2c_7 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	max77686: max77686_pmic@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 0>;
+		reg = <0x09 0 0>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-compatible = "LDO1";
+				regulator-name = "VALIVE_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-mem-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-compatible = "LDO2";
+				regulator-name = "VM1M2_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-mem-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-compatible = "LDO3";
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-mem-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-compatible = "LDO4";
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-mem-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-compatible = "LDO5";
+				regulator-name = "VCC_1.8V_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-mem-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-compatible = "LDO6";
+				regulator-name = "VMPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-mem-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-compatible = "LDO7";
+				regulator-name = "VPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-mem-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-compatible = "LDO8";
+				regulator-name = "VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-mem-off;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-compatible = "LDO9";
+				regulator-name = "CAM_ISP_MIPI_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-mem-idle;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-compatible = "LDO10";
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-mem-off;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-compatible = "LDO11";
+				regulator-name = "VABB1_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-mem-off;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-compatible = "LDO12";
+				regulator-name = "VUOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-mem-off;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-compatible = "LDO13";
+				regulator-name = "NFC_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-mem-idle;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-compatible = "LDO14";
+				regulator-name = "VABB2_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-mem-off;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-compatible = "LDO15";
+				regulator-name = "VHSIC_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-mem-off;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-compatible = "LDO16";
+				regulator-name = "VHSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-mem-off;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-compatible = "LDO17";
+				regulator-name = "CAM_SENSOR_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-mem-idle;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-compatible = "LDO18";
+				regulator-name = "CAM_ISP_SEN_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-mem-idle;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-compatible = "LDO19";
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-mem-idle;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-compatible = "LDO20";
+				regulator-name = "VDDQ_PRE_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-mem-idle;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-compatible = "LDO21";
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-mem-idle;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-compatible = "LDO22";
+				regulator-name = "VMEM_VDD_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-mem-off;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-compatible = "LDO23";
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-mem-idle;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-compatible = "LDO24";
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-mem-idle;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-compatible = "LDO25";
+				regulator-name = "LCD_VCC_3.3V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-mem-idle;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-compatible = "LDO26";
+				regulator-name = "MOTOR_VCC_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-mem-idle;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-compatible = "BUCK1";
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-mem-off;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-compatible = "BUCK2";
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-mem-off;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-compatible = "BUCK3";
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-mem-off;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-compatible = "BUCK4";
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-mem-off;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-compatible = "BUCK5";
+				regulator-name = "VMEM_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-compatible = "BUCK6";
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-compatible = "BUCK7";
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-compatible = "BUCK8";
+				regulator-name = "VMEM_VDDF_3.0V";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-mem-off;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-compatible = "BUCK9";
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-mem-off;
+			};
+		};
+	};
+};
+
+&sdhci0 {
+	samsung,bus-width = <8>;
+	samsung,timing = <1 3 3>;
+	pwr-gpios = <&gpk0 4 0>;
+	status = "disabled";
+};
+
+&sdhci2 {
+	samsung,bus-width = <4>;
+	samsung,timing = <1 2 3>;
+	cd-gpios = <&gpk2 2 0>;
+	status = "okay";
+};
+
+&mshc_0 {
+	samsung,bus-width = <8>;
+	samsung,timing = <2 1 0>;
+	samsung,removable = <0>;
+	fifoth_val = <0x203f0040>;
+	bus_hz = <400000000>;
+	div = <0x3>;
+	index = <4>;
+	fifo-depth = <0x80>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4412.dtsi b/roms/u-boot/arch/arm/dts/exynos4412.dtsi
new file mode 100644
index 000000000..4a7238556
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4412.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4412";
+};
+
+&combiner {
+	samsung,combiner-nr = <20>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+		     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi b/roms/u-boot/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi
new file mode 100644
index 000000000..955e14ef8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions to enable a generic Exynos GPIO driver
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/{
+	pinctrl_0: pinctrl@11400000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpf0: gpf0 {
+			reg = <0x180 0x20>;
+		};
+		gpj0: gpj0 {
+			reg = <0x240 0x20>;
+		};
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpk0: gpk0 {
+			reg = <0x40 0x20>;
+		};
+		gpm0: gpm0 {
+			reg = <0x260 0x20>;
+		};
+		gpx0: gpx0 {
+			reg = <0xc00 0x20>;
+		};
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+	};
+
+	pinctrl_3: pinctrl@106E0000 {
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4x12-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/exynos4x12-pinctrl.dtsi
new file mode 100644
index 000000000..23061351f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4x12-pinctrl.dtsi
@@ -0,0 +1,344 @@
+/*
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pinctrl@11000000 {
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpm0: gpm0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm1: gpm1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm2: gpm2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm3: gpm3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm4: gpm4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pinctrl@106E0000 {
+		gpv0: gpv0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv1: gpv1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv2: gpv2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv3: gpv3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv4: gpv4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos4x12.dtsi b/roms/u-boot/arch/arm/dts/exynos4x12.dtsi
new file mode 100644
index 000000000..ca4f3712d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos4x12.dtsi
@@ -0,0 +1,106 @@
+/*
+ * Samsung's Exynos4x12 SoCs device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+` * published by the Free Software Foundation.
+*/
+
+#include "exynos4.dtsi"
+#include "exynos4x12-pinctrl.dtsi"
+#include "exynos4x12-pinctrl-uboot.dtsi"
+
+/ {
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
+	pd_isp: isp-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+	};
+
+	clock: clock-controller@10030000 {
+		compatible = "samsung,exynos4412-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>, <4>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &gic 0 57 0>,
+					<1 &combiner 12 5>,
+					<2 &combiner 12 6>,
+					<3 &combiner 12 7>,
+					<4 &gic 1 12 0>;
+		};
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,exynos4x12-pinctrl";
+		reg = <0x11400000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 47 0>;
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,exynos4x12-pinctrl";
+		reg = <0x11000000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,exynos4x12-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 0>;
+	};
+
+	pinctrl_3: pinctrl@106E0000 {
+		compatible = "samsung,exynos4x12-pinctrl";
+		reg = <0x106E0000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 72 0>;
+	};
+
+	g2d@10800000 {
+		compatible = "samsung,exynos4212-g2d";
+		reg = <0x10800000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 89 0>;
+		clocks = <&clock 177>, <&clock 277>;
+		clock-names = "sclk_fimg2d", "fimg2d";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5.dtsi b/roms/u-boot/arch/arm/dts/exynos5.dtsi
new file mode 100644
index 000000000..cdc965d90
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5.dtsi
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2013 The Chromium OS Authors
+ * SAMSUNG EXYNOS5 SoC device tree source
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "samsung,exynos5";
+
+	interrupt-parent = <&gic>;
+
+	combiner: interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		samsung,combiner-nr = <32>;
+		reg = <0x10440000 0x1000>;
+		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+	};
+
+	gic: interrupt-controller@10481000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg =	<0x10481000 0x1000>,
+			<0x10482000 0x1000>,
+			<0x10484000 0x2000>,
+			<0x10486000 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	sromc@12250000 {
+		compatible = "samsung,exynos-sromc";
+		reg = <0x12250000 0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_0: i2c@12C60000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C60000 0x100>;
+		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_1: i2c@12C70000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C70000 0x100>;
+		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_2: i2c@12C80000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C80000 0x100>;
+		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_3: i2c@12C90000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C90000 0x100>;
+		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi_0: spi@12d20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-spi";
+		reg = <0x12d20000 0x30>;
+		interrupts = <0 68 0>;
+	};
+
+	spi_1: spi@12d30000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-spi";
+		reg = <0x12d30000 0x30>;
+		interrupts = <0 69 0>;
+	};
+
+	spi_2: spi@12d40000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-spi";
+		reg = <0x12d40000 0x30>;
+		clock-frequency = <50000000>;
+		interrupts = <0 70 0>;
+        };
+
+	spi_3: spi@131a0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-spi";
+		reg = <0x131a0000 0x30>;
+		interrupts = <0 129 0>;
+	};
+
+	spi_4: spi@131b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-spi";
+		reg = <0x131b0000 0x30>;
+		interrupts = <0 130 0>;
+	};
+
+	ehci@12110000 {
+		compatible = "samsung,exynos-ehci";
+		reg = <0x12110000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos-usb-phy";
+			reg = <0x12130000 0x100>;
+		};
+	};
+
+	tmu@10060000 {
+		compatible = "samsung,exynos-tmu";
+		reg = <0x10060000 0x10000>;
+	};
+
+	fimd@14400000 {
+		u-boot,dm-pre-reloc;
+		compatible = "samsung,exynos-fimd";
+		reg = <0x14400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	dp: dp@145b0000 {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x1000>;
+	};
+
+	xhci0: xhci@12000000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12100000 0x100>;
+		};
+	};
+
+	mmc@12200000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-dwmmc";
+		reg = <0x12200000 0x1000>;
+		interrupts = <0 75 0>;
+	};
+
+	mmc@12210000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-dwmmc";
+		reg = <0x12210000 0x1000>;
+		interrupts = <0 76 0>;
+	};
+
+	mmc@12220000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-dwmmc";
+		reg = <0x12220000 0x1000>;
+		interrupts = <0 77 0>;
+	};
+
+	mmc@12230000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-dwmmc";
+		reg = <0x12230000 0x1000>;
+		interrupts = <0 78 0>;
+	};
+
+	serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 51 0>;
+		id = <0>;
+	};
+
+	serial@12C10000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C10000 0x100>;
+		interrupts = <0 52 0>;
+		id = <1>;
+	};
+
+	serial@12C20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C20000 0x100>;
+		interrupts = <0 53 0>;
+		id = <2>;
+	};
+
+	serial@12C30000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C30000 0x100>;
+		interrupts = <0 54 0>;
+		u-boot,dm-pre-reloc;
+		id = <3>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5250-arndale.dts b/roms/u-boot/arch/arm/dts/exynos5250-arndale.dts
new file mode 100644
index 000000000..60309c61f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5250-arndale.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SAMSUNG Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5250.dtsi"
+
+/ {
+	model = "SAMSUNG Arndale board based on EXYNOS5250";
+	compatible = "samsung,arndale", "samsung,exynos5250";
+
+	aliases {
+		i2c0 = "/i2c@12C60000";
+		i2c1 = "/i2c@12C70000";
+		i2c2 = "/i2c@12C80000";
+		i2c3 = "/i2c@12C90000";
+		i2c4 = "/i2c@12CA0000";
+		i2c5 = "/i2c@12CB0000";
+		i2c6 = "/i2c@12CC0000";
+		i2c7 = "/i2c@12CD0000";
+		serial0 = "/serial@12C20000";
+		console = "/serial@12C20000";
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi b/roms/u-boot/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi
new file mode 100644
index 000000000..b41480531
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions to enable a generic Exynos GPIO driver
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/{
+	pinctrl_0: pinctrl@11400000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpc4: gpc4 {
+			reg = <0x2e0 0x20>;
+		};
+		gpx0: gpx0 {
+			reg = <0xc00 0x20>;
+		};
+	};
+
+	pinctrl_1: pinctrl@13400000 {
+	};
+
+	pinctrl_2: pinctrl@10d10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpv2: gpv2 {
+			reg = <0x060 0x20>;
+		};
+		gpv4: gpv4 {
+			reg = <0xc0 0x20>;
+		};
+	};
+
+	pinctrl_3: pinctrl@03860000 {
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5250-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/exynos5250-pinctrl.dtsi
new file mode 100644
index 000000000..67755a1e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5250-pinctrl.dtsi
@@ -0,0 +1,331 @@
+/*
+ * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpc4: gpc4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+				     <26 0>, <26 1>, <27 0>, <27 1>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+				     <30 0>, <30 1>, <31 0>, <31 1>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pinctrl@13400000 {
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph0: gph0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph1: gph1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pinctrl@10d10000 {
+		gpv0: gpv0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv1: gpv1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv2: gpv2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv3: gpv3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv4: gpv4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5250-smdk5250.dts b/roms/u-boot/arch/arm/dts/exynos5250-smdk5250.dts
new file mode 100644
index 000000000..e542a7907
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5250-smdk5250.dts
@@ -0,0 +1,319 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5250.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+	compatible = "samsung,smdk5250", "samsung,exynos5250";
+
+	aliases {
+		i2c0 = "/i2c@12C60000";
+		i2c1 = "/i2c@12C70000";
+		i2c2 = "/i2c@12C80000";
+		i2c3 = "/i2c@12C90000";
+		i2c4 = "/i2c@12CA0000";
+		i2c5 = "/i2c@12CB0000";
+		i2c6 = "/i2c@12CC0000";
+		i2c7 = "/i2c@12CD0000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		mmc3 = "/mmc@12230000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		i2s = "/sound@3830000";
+	};
+
+	sromc@12250000 {
+		bank = <1>;
+		srom-timing = <1 9 12 1 6 1 1>;
+		width = <2>;
+		lan@5000000 {
+			compatible = "smsc,lan9215", "smsc,lan";
+			reg = <0x5000000 0x100>;
+			phy-mode = "mii";
+		};
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "wm8994";
+	};
+
+	sound@12d60000 {
+		status = "disabled";
+	};
+
+	i2c@12C70000 {
+		wm8994: soundcodec@1a {
+			reg = <0x1a>;
+			u-boot,i2c-offset-len = <2>;
+			compatible = "wolfson,wm8994";
+			#sound-dai-cells = <1>;
+		};
+	};
+
+	sound {
+		compatible = "google,smdk5250-audio-wm8994";
+
+		samsung,model = "SMDK5250-I2S-WM8994";
+		samsung,audio-codec = <&wm8994>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&wm8994 0>;
+		};
+	};
+
+	i2c@12C60000 {
+		pmic@9 {
+			reg = <0x9>;
+			compatible = "maxim,max77686";
+		};
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <2560>;
+		samsung,vl-row = <1600>;
+		samsung,vl-width = <2560>;
+		samsung,vl-height = <1600>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <37>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+
+	max77686@09 {
+		compatible = "maxim,max77686";
+		reg = <0x09>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.2V_LDO_OUT2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "P2.8V_LDO_OUT4";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "P1.8V_LDO_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "P1.1V_LDO_OUT6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "P1.8V_LDO_OUT11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "P1.8V_LDO_OUT13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5250-snow.dts b/roms/u-boot/arch/arm/dts/exynos5250-snow.dts
new file mode 100644
index 000000000..e41f2d304
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5250-snow.dts
@@ -0,0 +1,553 @@
+/*
+ * SAMSUNG Snow board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Google Snow";
+	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
+
+	aliases {
+		i2c0 = "/i2c@12C60000";
+		i2c1 = "/i2c@12C70000";
+		i2c2 = "/i2c@12C80000";
+		i2c3 = "/i2c@12C90000";
+		i2c4 = "/i2c@12CA0000";
+		i2c104 = &i2c_104;
+		i2c5 = "/i2c@12CB0000";
+		i2c6 = "/i2c@12CC0000";
+		i2c7 = "/i2c@12CD0000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		mmc3 = "/mmc@12230000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+	};
+
+        memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+		stdout-path = "serial3:115200n8";
+	};
+
+	iram {
+		reg = <0x02020000 0x60000>;
+	};
+
+	config {
+		samsung,bl1-offset = <0x1400>;
+		samsung,bl2-offset = <0x3400>;
+		u-boot-memory = "/memory";
+		u-boot-offset = <0x3e00000 0x100000>;
+	};
+
+	flash {
+		reg = <0 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		pre-boot {
+			label = "bl1 pre-boot";
+			reg = <0 0x2000>;
+			read-only;
+			filename = "e5250.nbl1.bin";
+			type = "blob exynos-bl1";
+			required;
+		};
+
+		spl {
+			label = "bl2 spl";
+			reg = <0x2000 0x4000>;
+			read-only;
+			filename = "bl2.bin";
+			type = "blob exynos-bl2 boot,dtb";
+			payload = "/flash/ro-boot";
+			required;
+		};
+
+		ro-boot {
+			label = "u-boot";
+			reg = <0x6000 0xb0000>;
+			read-only;
+			type = "blob boot,dtb";
+			required;
+		};
+	};
+
+	i2c-arbitrator {
+		compatible = "i2c-arb-gpio-challenge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@12CA0000}>;
+
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+		slew-delay-us = <10>;
+		wait-retry-us = <3000>;
+		wait-free-us = <50000>;
+
+		/* Use ID 104 as a hint that we're on physical bus 4 */
+		i2c_104: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+
+			cros_ec: embedded-controller {
+				compatible = "google,cros-ec-i2c";
+				reg = <0x1e>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-parent = <&gpx1>;
+				wakeup-source;
+				i2c-max-frequency = <100000>;
+				u-boot,i2c-offset-len = <0>;
+				ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
+			};
+
+			power-regulator {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1: fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6: fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+
+	i2c@12CD0000 {
+		ptn3460: lvds-bridge@20 {
+			compatible = "nxp,ptn3460";
+			reg = <0x20>;
+			sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+			hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+			edid-emulation = <5>;
+
+			ports {
+				port@0 {
+					bridge_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+
+				port@1 {
+					bridge_in: endpoint {
+						remote-endpoint = <&dp_out>;
+					};
+				};
+			};
+		};
+
+		max98095: codec@11 {
+			compatible = "maxim,max98095";
+			reg = <0x11>;
+			#sound-dai-cells = <1>;
+		};
+	};
+
+	i2c@12C90000 {
+		clock-frequency = <100000>;
+		tpm@20 {
+			reg = <0x20>;
+			u-boot,i2c-offset-len = <0>;
+			compatible = "infineon,slb9635tt";
+		};
+	};
+
+	spi@12d30000 {
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	spi@131b0000 {
+		spi-max-frequency = <1000000>;
+		spi-deactivate-delay = <100>;
+
+		/* Snow did support SPI but the released version used I2C */
+		embedded-controller {
+			compatible = "google,cros-ec-i2c";
+			reg = <0x1e>;
+			spi-max-frequency = <5000000>;
+			ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
+			optimise-flash-write;
+			status = "disabled";
+		};
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98095";
+
+		samsung,model = "Snow-I2S-MAX98095";
+		samsung,audio-codec = <&max98095>;
+		codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98095 0>;
+		};
+	};
+
+	sound@12d60000 {
+		status = "disabled";
+	};
+
+	i2c@12C60000 {
+		max77686@09 {
+			reg = <0x9>;
+			compatible = "maxim,max77686";
+		};
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <1366>;
+		samsung,vl-row = <768>;
+		samsung,vl-width = <1366>;
+		samsung,vl-height = <768>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-hsp;
+		samsung,vl-vsp;
+
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <5>;
+		samsung,vl-vbpd = <14>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <0>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			port@0 {
+				dp_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
+	};
+
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	max77686: max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.8V_LDO_OUT2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vdd_mydp";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.35V_BUCK_OUT6";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "P2.0V_BUCK_OUT7";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "P2.85V_BUCK_OUT8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/exynos5250-spring.dts b/roms/u-boot/arch/arm/dts/exynos5250-spring.dts
new file mode 100644
index 000000000..77e7a6b9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5250-spring.dts
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Google Spring";
+	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+	aliases {
+		i2c0 = "/i2c@12C60000";
+		i2c1 = "/i2c@12C70000";
+		i2c2 = "/i2c@12C80000";
+		i2c3 = "/i2c@12C90000";
+		i2c4 = "/i2c@12CA0000";
+		i2c5 = "/i2c@12CB0000";
+		i2c6 = "/i2c@12CC0000";
+		i2c7 = "/i2c@12CD0000";
+		i2c104 = &cros_ec_ldo_tunnel;
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	iram {
+		reg = <0x02020000 0x60000>;
+	};
+
+	config {
+		samsung,bl1-offset = <0x1400>;
+		samsung,bl2-offset = <0x3400>;
+		u-boot-memory = "/memory";
+		u-boot-offset = <0x3e00000 0x100000>;
+	};
+
+	flash@0 {
+		reg = <0 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		pre-boot {
+			label = "bl1 pre-boot";
+			reg = <0 0x2000>;
+			read-only;
+			filename = "e5250.nbl1.bin";
+			type = "blob exynos-bl1";
+			required;
+		};
+
+		spl {
+			label = "bl2 spl";
+			reg = <0x2000 0x8000>;
+			read-only;
+			filename = "bl2.bin";
+			type = "blob exynos-bl2 boot,dtb";
+			payload = "/flash/ro-boot";
+			required;
+		};
+
+		ro-boot {
+			label = "u-boot";
+			reg = <0xa000 0xb0000>;
+			read-only;
+			type = "blob boot,dtb";
+			required;
+		};
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+		stdout-path = "serial3:115200n8";
+	};
+
+	board-rev {
+		compatible = "google,board-revision";
+		google,board-rev-gpios = <&gpy4 0 0>, <&gpy4 1 0>,
+					 <&gpy4 2 0>;
+	};
+
+	i2c@12C90000 {
+		clock-frequency = <100000>;
+		tpm@20 {
+			reg = <0x20>;
+			compatible = "infineon,slb9645tt";
+		};
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		/* MMC2 pins are used as GPIO for eDP bridge */
+		status = "disabled";
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "google,spring-audio-max98088";
+
+		samsung,model = "Spring-I2S-MAX98088";
+		samsung,audio-codec = <&max98088>;
+		codec-enable-gpio = <&gpx1 7 0>;
+
+		cpu {
+			sound-dai = <&i2s1 0>;
+		};
+
+		codec {
+			sound-dai = <&max98088 0>;
+		};
+	};
+
+	spi@12d30000 {
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+		};
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <1366>;
+		samsung,vl-row = <768>;
+		samsung,vl-width = <1366>;
+		samsung,vl-height = <768>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-hsp;
+		samsung,vl-vsp;
+
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <5>;
+		samsung,vl-vbpd = <14>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <0>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <1>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	s5m8767-pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx3>;
+		wakeup-source;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+		                              <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+		                              <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+		                             <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+		                             <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+		/*
+		 * The following arrays of DVS voltages are not used, since we are
+		 * not using GPIOs to control PMIC bucks, but they must be defined
+		 * to please the driver.
+		 */
+		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+		                                 <1250000>, <1200000>,
+		                                 <1150000>, <1100000>,
+		                                 <1000000>, <950000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+		                                 <1100000>, <1100000>,
+		                                 <1000000>, <1000000>,
+		                                 <1000000>, <1000000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+		                                 <1200000>, <1200000>,
+		                                 <1200000>, <1200000>,
+		                                 <1200000>, <1200000>;
+
+		clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "en32khz_ap",
+			                     "en32khz_cp",
+			                     "en32khz_bt";
+		};
+
+		regulators {
+			ldo4_reg: LDO4 {
+				regulator-name = "P1.0V_LDO_OUT4";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "P1.8V_LDO_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_mydp";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "P1.8V_LDO_OUT11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "P1.8V_LDO_OUT13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "P1.2V_LDO_OUT17";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_bridge";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.2V_BUCK_OUT6";
+				regulator-min-microvolt = <2050000>;
+				regulator-max-microvolt = <2050000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <0>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_ummc";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+		};
+	};
+};
+
+&dp {
+	status = "okay";
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <1>;
+	samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port@0 {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	clock-frequency = <66000>;
+
+	cros_ec: embedded-controller {
+		compatible = "google,cros-ec-i2c";
+		reg = <0x1e>;
+		interrupts = <6 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+		u-boot,i2c-offset-len = <0>;
+		ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
+		cros_ec_ldo_tunnel: cros-ec-ldo-tunnel {
+			compatible = "google,cros-ec-ldo-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-regulator {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1: fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6: fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	ps8622-bridge@8 {
+		compatible = "parade,ps8622";
+		reg = <0x8>;
+		sleep-gpios = <&gpc3 6 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpc3 1 GPIO_ACTIVE_LOW>;
+		hotplug-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&ldo6_reg>;
+		parade,regs = /bits/ 8 <
+			0x02 0xa1 0x01 /* HPD low */
+			/*
+			 * SW setting: [1:0] SW output 1.2V voltage is
+			 * lower to 96%
+			 */
+			0x04 0x14 0x01
+			/* RCO SS setting: [5:4] = b01 0.5%, b10 1%, b11 1.5% */
+			0x04 0xe3 0x20
+			0x04 0xe2 0x80 /* [7] RCO SS enable */
+			/*
+			 * RPHY Setting: [3:2] CDR tune wait cycle before
+			 * measure for fine tune b00: 1us,
+			 * 01: 0.5us, 10:2us, 11:4us
+			 */
+			0x04 0x8a 0x0c
+			0x04 0x89 0x08 /* [3] RFD always on */
+			/*
+			 * CTN lock in/out: 20000ppm/80000ppm. Lock out 2 times
+			 */
+			0x04 0x71 0x2d
+			/* 2.7G CDR settings */
+			0x04 0x7d 0x07 /* NOF=40LSB for HBR CDR setting */
+			0x04 0x7b 0x00 /* [1:0] Fmin=+4bands */
+			0x04 0x7a 0xfd /* [7:5] DCO_FTRNG=+-40% */
+			/*
+			 * 1.62G CDR settings:
+			 * [5:2]NOF=64LSB [1:0]DCO scale is 2/5
+			 */
+			0x04 0xc0 0x12
+			0x04 0xc1 0x92 /* Gitune=-37% */
+			0x04 0xc2 0x1c /* Fbstep=100% */
+			0x04 0x32 0x80 /* [7] LOS signal disable */
+			/* RPIO Setting */
+			/* [7:4] LVDS driver bias current 75% (250mV swing) */
+			0x04 0x00 0xb0
+			 /* [7:6] Right-bar GPIO output strength is 8mA */
+			0x04 0x15 0x40
+			/* EQ Training State Machine Setting */
+			0x04 0x54 0x10 /* RCO calibration start */
+			/* [4:0] MAX_LANE_COUNT set to one lane */
+			0x01 0x02 0x81
+			/* [4:0] LANE_COUNT_SET set to one lane */
+			0x01 0x21 0x81
+			0x00 0x52 0x20
+			0x00 0xf1 0x03 /* HPD CP toggle enable */
+			0x00 0x62 0x41
+			/* Counter number add 1ms counter delay */
+			0x00 0xf6 0x01
+			/*
+			 * [6]PWM function control by DPCD0040f[7], default
+			 * is PWM block always works
+			 */
+			0x00 0x77 0x06
+			0x00 0x4c 0x04
+			/*
+			 * 04h Adjust VTotal tolerance to fix the 30Hz no-
+			 * display issue
+			 * DPCD00400='h00 Parade OUI = 'h001cf8
+			 */
+			0x01 0xc0 0x00
+			0x01 0xc1 0x1c /* DPCD00401='h1c */
+			0x01 0xc2 0xf8 /* DPCD00402='hf8 */
+			/* DPCD403~408 = ASCII code D2SLV5='h4432534c5635 */
+			0x01 0xc3 0x44
+			0x01 0xc4 0x32 /* DPCD404 */
+			0x01 0xc5 0x53 /* DPCD405 */
+			0x01 0xc6 0x4c /* DPCD406 */
+			0x01 0xc7 0x56 /* DPCD407 */
+			0x01 0xc8 0x35 /* DPCD408 */
+			/* DPCD40A Initial Code major revision '01' */
+			0x01 0xca 0x01
+			/* DPCD40B Initial Code minor revision '05' */
+			0x01 0xcb 0x05
+			0x01 0xa5 0xa0 /* DPCD720, Select internal PWM */
+			/*
+			 * 0xff for 100% PWM of brightness, 0h for 0% brightness
+			 */
+			0x01 0xa7 0x00
+			/*
+			 * Set LVDS output as 6bit-VESA mapping, single LVDS
+			 * channel
+			 */
+			0x01 0xcc 0x13
+			0x02 0xb1 0x20 /* Enable SSC set by register */
+			/* Set SSC enabled and +/-1% central spreading */
+			0x04 0x10 0x16
+			0x04 0x59 0x60 /* MPU Clock source: LC => RCO */
+			0x04 0x54 0x14 /* LC -> RCO */
+			0x02 0xa1 0x91>; /* HPD high */
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+
+	max98088: soundcodec@10 {
+		reg = <0x10>;
+		compatible = "maxim,max98088";
+		#sound-dai-cells = <1>;
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/exynos5250.dtsi b/roms/u-boot/arch/arm/dts/exynos5250.dtsi
new file mode 100644
index 000000000..66c5b6dca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5250.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * SAMSUNG EXYNOS5250 SoC device tree source
+ */
+
+#include "exynos5.dtsi"
+#include "exynos5250-pinctrl.dtsi"
+#include "exynos5250-pinctrl-uboot.dtsi"
+
+/ {
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@13400000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+	};
+
+	pinctrl_2: pinctrl@10d10000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x10d10000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_3: pinctrl@03860000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	i2c_4: i2c@12CA0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12CA0000 0x100>;
+		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_5: i2c@12CB0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12CB0000 0x100>;
+		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_6: i2c@12CC0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12CC0000 0x100>;
+		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_7: i2c@12CD0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12CD0000 0x100>;
+		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2s0: i2s@3830000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x03830000 0x100>;
+		samsung,idma-addr = <0x03000000>;
+		#clock-cells = <1>;
+		#sound-dai-cells = <1>;
+		samsung,i2s-epll-clock-frequency = <192000000>;
+		samsung,i2s-sampling-rate = <48000>;
+		samsung,i2s-bits-per-sample = <16>;
+		samsung,i2s-channels = <2>;
+		samsung,i2s-lr-clk-framesize = <256>;
+		samsung,i2s-bit-clk-framesize = <32>;
+		samsung,i2s-id = <0>;
+	};
+
+	i2s1: i2s@12d60000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x12d60000 0x20>;
+		#clock-cells = <1>;
+		#sound-dai-cells = <1>;
+		samsung,i2s-epll-clock-frequency = <192000000>;
+		samsung,i2s-sampling-rate = <48000>;
+		samsung,i2s-bits-per-sample = <16>;
+		samsung,i2s-channels = <2>;
+		samsung,i2s-lr-clk-framesize = <256>;
+		samsung,i2s-bit-clk-framesize = <32>;
+		samsung,i2s-id = <1>;
+	};
+
+
+	xhci@12000000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12100000 0x100>;
+		};
+	};
+
+	pwm: pwm@12dd0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12dd0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5420-peach-pit.dts b/roms/u-boot/arch/arm/dts/exynos5420-peach-pit.dts
new file mode 100644
index 000000000..a68c3b517
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5420-peach-pit.dts
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SAMSUNG/GOOGLE Peach-Pit board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos54xx.dtsi"
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
+
+/ {
+	model = "Samsung/Google Peach Pit board based on Exynos5420";
+
+	compatible = "google,pit-rev#", "google,pit",
+		"google,peach", "samsung,exynos5420", "samsung,exynos5";
+
+	config {
+		google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+		hwid = "PIT TEST A-A 7848";
+		lazy-init = <1>;
+	};
+
+	aliases {
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		pmic = "/i2c@12CA0000";
+		i2c104 = &i2c_tunnel;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		power-supply = <&tps65090_fet1>;
+	};
+
+	dmc {
+		mem-manuf = "samsung";
+		mem-type = "ddr3";
+		clock-frequency = <800000000>;
+		arm-frequency = <900000000>;
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* MAX77802 is on i2c bus 4 */
+	i2c@12CA0000 {
+		clock-frequency = <400000>;
+		power-regulator@9 {
+			compatible = "maxim,max77802-pmic";
+			reg = <0x9>;
+		};
+	};
+
+	sound {
+		compatible = "google,peach-audio-max98090";
+
+		samsung,model = "PEACH-I2S-MAX98090";
+		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>;
+		};
+	};
+
+	i2c@12CD0000 { /* i2c7 */
+		clock-frequency = <100000>;
+		max98090: soundcodec@10 {
+			reg = <0x10>;
+			compatible = "maxim,max98090";
+			#sound-dai-cells = <1>;
+		};
+
+		edp-lvds-bridge@48 {
+			compatible = "parade,ps8625";
+			reg = <0x48>;
+			sleep-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpy7 7 GPIO_ACTIVE_LOW>;
+			parade,regs = /bits/ 8 <
+				0x02 0xa1 0x01  /* HPD low */
+				/*
+				* SW setting
+				* [1:0] SW output 1.2V voltage is lower to 96%
+				*/
+				0x04 0x14 0x01
+				/*
+				* RCO SS setting
+				* [5:4] = b01 0.5%, b10 1%, b11 1.5%
+				*/
+				0x04 0xe3 0x20
+				0x04 0xe2 0x80 /* [7] RCO SS enable */
+				/*
+				*  RPHY Setting
+				* [3:2] CDR tune wait cycle before
+				* measure for fine tune b00: 1us,
+				* 01: 0.5us, 10:2us, 11:4us.
+				*/
+				0x04 0x8a 0x0c
+				0x04 0x89 0x08 /* [3] RFD always on */
+				/*
+				* CTN lock in/out:
+				* 20000ppm/80000ppm. Lock out 2
+				* times.
+				*/
+				0x04 0x71 0x2d
+				/*
+				* 2.7G CDR settings
+				* NOF=40LSB for HBR CDR setting
+				*/
+				0x04 0x7d 0x07
+				0x04 0x7b 0x00  /* [1:0] Fmin=+4bands */
+				0x04 0x7a 0xfd  /* [7:5] DCO_FTRNG=+-40% */
+				/*
+				* 1.62G CDR settings
+				* [5:2]NOF=64LSB [1:0]DCO scale is 2/5
+				*/
+				0x04 0xc0 0x12
+				0x04 0xc1 0x92  /* Gitune=-37% */
+				0x04 0xc2 0x1c  /* Fbstep=100% */
+				0x04 0x32 0x80  /* [7]LOS signal disable */
+				/*
+				* RPIO Setting
+				* [7:4] LVDS driver bias current :
+				* 75% (250mV swing)
+				*/
+				0x04 0x00 0xb0
+				/*
+				* [7:6] Right-bar GPIO output strength is 8mA
+				*/
+				0x04 0x15 0x40
+				/* EQ Training State Machine Setting */
+				0x04 0x54 0x10  /* RCO calibration start */
+				/* [4:0] MAX_LANE_COUNT set to one lane */
+				0x01 0x02 0x81
+				/* [4:0] LANE_COUNT_SET set to one lane */
+				0x01 0x21 0x81
+				0x00 0x52 0x20
+				0x00 0xf1 0x03  /* HPD CP toggle enable */
+				0x00 0x62 0x41
+				/* Counter number add 1ms counter delay */
+				0x00 0xf6 0x01
+				/*
+				* [6]PWM function control by
+				* DPCD0040f[7], default is PWM
+				* block always works.
+				*/
+				0x00 0x77 0x06
+				/*
+				* 04h Adjust VTotal tolerance to
+				* fix the 30Hz no display issue
+				*/
+				0x00 0x4c 0x04
+				/* DPCD00400='h00, Parade OUI = 'h001cf8 */
+				0x01 0xc0 0x00
+				0x01 0xc1 0x1c  /* DPCD00401='h1c */
+				0x01 0xc2 0xf8  /* DPCD00402='hf8 */
+				/*
+				* DPCD403~408 = ASCII code
+				* D2SLV5='h4432534c5635
+				*/
+				0x01 0xc3 0x44
+				0x01 0xc4 0x32  /* DPCD404 */
+				0x01 0xc5 0x53  /* DPCD405 */
+				0x01 0xc6 0x4c  /* DPCD406 */
+				0x01 0xc7 0x56  /* DPCD407 */
+				0x01 0xc8 0x35  /* DPCD408 */
+				/*
+				* DPCD40A, Initial Code major  revision
+				* '01'
+				*/
+				0x01 0xca 0x01
+				/* DPCD40B Initial Code minor revision '05' */
+				0x01 0xcb 0x05
+				/* DPCD720 Select internal PWM */
+				0x01 0xa5 0xa0
+				/*
+				* FFh for 100% PWM of brightness, 0h for 0%
+				* brightness
+				*/
+				0x01 0xa7 0xff
+				/*
+				* Set LVDS output as 6bit-VESA mapping,
+				* single LVDS channel
+				*/
+				0x01 0xcc 0x13
+				/* Enable SSC set by register */
+				0x02 0xb1 0x20
+				/*
+				* Set SSC enabled and +/-1% central
+				* spreading
+				*/
+				0x04 0x10 0x16
+				/* MPU Clock source: LC => RCO */
+				0x04 0x59 0x60
+				0x04 0x54 0x14  /* LC -> RCO */
+				0x02 0xa1 0x91>;  /* HPD high */
+
+			ports {
+				port@0 {
+					bridge_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+
+				port@1 {
+					bridge_in: endpoint {
+						remote-endpoint = <&dp_out>;
+					};
+				};
+			};
+	        };
+	};
+
+        sound@3830000 {
+                samsung,codec-type = "max98090";
+        };
+
+	i2c@12E10000 { /* i2c9 */
+		clock-frequency = <400000>;
+		tpm@20 {
+			compatible = "infineon,slb9645tt";
+			reg = <0x20>;
+		};
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&tps65090_fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	spi@12d30000 { /* spi1 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+
+			/*
+			 * A region for the kernel to store a panic event
+			 * which the firmware will add to the log.
+			*/
+			elog-panic-event-offset = <0x01e00000 0x100000>;
+
+			elog-shrink-size = <0x400>;
+			elog-full-threshold = <0xc00>;
+		};
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	xhci@12400000 {
+		samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <1366>;
+		samsung,vl-row = <768>;
+		samsung,vl-width = <1366>;
+		samsung,vl-height = <768>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <40>;
+		samsung,vl-hfpd = <40>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <10>;
+		samsung,vl-vfpd = <12>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+};
+
+&dp {
+	status = "okay";
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x06>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port@0 {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&spi_2 {
+	spi-max-frequency = <3125000>;
+	spi-deactivate-delay = <200>;
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		reg = <0>;
+		spi-half-duplex;
+		spi-max-timeout-ms = <1100>;
+		ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This describes the flash memory within the EC. Note
+		 * that the STM32L flash erases to 0, not 0xff.
+		 */
+		flash@8000000 {
+			reg = <0x08000000 0x20000>;
+			erase-value = <0>;
+		};
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/exynos5420-smdk5420.dts b/roms/u-boot/arch/arm/dts/exynos5420-smdk5420.dts
new file mode 100644
index 000000000..7a5da674f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5420-smdk5420.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SAMSUNG SMDK5420 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos54xx.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK5420 board based on EXYNOS5420";
+	compatible = "samsung,smdk5420", "samsung,exynos5";
+
+	config {
+		hwid = "smdk5420 TEST A-A 9382";
+	};
+
+	aliases {
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* s2mps11 is on i2c bus 4 */
+	i2c@12CA0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pmic@66 {
+			reg = <0x66>;
+			compatible = "samsung,s2mps11-pmic";
+		};
+	};
+
+	spi@12d20000 { /* spi0 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			reg = <0>;
+		};
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <2560>;
+		samsung,vl-row = <1600>;
+		samsung,vl-width = <2560>;
+		samsung,vl-height = <1600>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <37>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "wm8994";
+	};
+
+	i2c@12C70000 {
+		wm8994: soundcodec@1a {
+			reg = <0x1a>;
+			u-boot,i2c-offset-len = <2>;
+			compatible = "wolfson,wm8994";
+			#sound-dai-cells = <1>;
+		};
+	};
+
+	sound {
+		compatible = "samsung,smdk5420-audio-wm8994";
+
+		samsung,model = "Snow-I2S-MAX98095";
+		samsung,audio-codec = <&wm8994>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&wm8994 0>;
+		};
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	fimd@14400000 {
+		/* sysmmu is not used in U-Boot */
+		samsung,disable-sysmmu;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	dmc {
+		mem-type = "ddr3";
+	};
+
+	xhci1: xhci@12400000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12500000 0x100>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5422-odroidxu3.dts b/roms/u-boot/arch/arm/dts/exynos5422-odroidxu3.dts
new file mode 100644
index 000000000..256df6d6c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5422-odroidxu3.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Odroid XU3 device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos54xx.dtsi"
+
+/ {
+	model = "Odroid XU3/XU4/HC1/HC2 based on Exynos5422";
+	compatible = "samsung,odroidxu3", "samsung,exynos5";
+
+	aliases {
+		serial0 = "/serial@12C00000";
+		console = "/serial@12C20000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000
+			0x60000000 0x10000000
+			0x70000000 0x10000000
+			0x80000000 0x10000000
+			0x90000000 0x10000000
+			0xa0000000 0x10000000
+			0xb0000000 0xea00000>;
+	};
+
+	adc@12D10000 {
+		u-boot,dm-pre-reloc;
+		vdd-supply = <&ldo4_reg>;
+		status = "okay";
+	};
+
+	i2c@12CA0000 {
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "vdd_ldo1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "vddq_mmc0";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <12000>;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "vdd_adc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <12000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "vdd_ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "vdd_ldo6";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "vdd_ldo7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "vdd_ldo8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "vdd_ldo9";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "vdd_ldo10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "vdd_ldo11";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "vdd_ldo12";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "vddq_mmc2";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-ramp-delay = <12000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "vdd_ldo15";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "vdd_ldo16";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "vdd_ldo17";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "vdd_emmc_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <12000>;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "vdd_sd";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-ramp-delay = <12000>;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "tsp_io";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "vdd_ldo26";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-ramp-delay = <12000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_mem";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd_kfc";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "vdd_1.0v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "vdd_1.8v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vdd_2.8v_ldo";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3750000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "vdd_vmem";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	serial@12C20000 {
+		status = "okay";
+	};
+
+	mmc@12200000 {
+		fifoth_val = <0x201f0020>;
+	};
+
+	mmc@12220000 {
+		fifoth_val = <0x201f0020>;
+	};
+
+	emmc-reset {
+		compatible = "samsung,emmc-reset";
+		reset-gpio = <&gpd1 0 0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi b/roms/u-boot/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi
new file mode 100644
index 000000000..4fcbe71fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions to enable a generic Exynos GPIO driver
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/{
+	/*
+	 * Replicate the ordering of arch/arm/include/asm/arch-exynos/gpio.h
+	 * TODO(sjg@chromium.org): This ordering ceases to matter once GPIO
+	 * numbers are not needed in U-Boot for exynos.
+	 */
+	pinctrl@14010000 {
+	};
+	pinctrl@13400000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpy7 {
+		};
+
+		gpx0 {
+			reg = <0xc00 0x0>;
+		};
+	};
+	pinctrl@13410000 {
+	};
+	pinctrl@14000000 {
+	};
+	pinctrl@03860000 {
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos54xx-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/exynos54xx-pinctrl.dtsi
new file mode 100644
index 000000000..775d956a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos54xx-pinctrl.dtsi
@@ -0,0 +1,305 @@
+/*
+ * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos54xx-pinctrl-uboot.dtsi"
+
+/ {
+	pinctrl@13400000 {
+		gpy7: gpy7 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+				     <26 0>, <26 1>, <27 0>, <27 1>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+				     <30 0>, <30 1>, <31 0>, <31 1>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pinctrl@13410000 {
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc4: gpc4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+
+	pinctrl@14000000 {
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj4: gpj4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pinctrl@14010000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb4: gpb4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph0: gph0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos54xx.dtsi b/roms/u-boot/arch/arm/dts/exynos54xx.dtsi
new file mode 100644
index 000000000..221da8b48
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos54xx.dtsi
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013 SAMSUNG Electronics
+ * SAMSUNG EXYNOS5420 SoC device tree source
+ */
+
+#include "exynos5.dtsi"
+#include "exynos54xx-pinctrl.dtsi"
+
+/ {
+	config {
+		machine-arch-id = <4151>;
+	};
+
+	aliases {
+		i2c0 = "/i2c@12C60000";
+		i2c1 = "/i2c@12C70000";
+		i2c2 = "/i2c@12C80000";
+		i2c3 = "/i2c@12C90000";
+		i2c4 = "/i2c@12CA0000";
+		i2c5 = "/i2c@12CB0000";
+		i2c6 = "/i2c@12CC0000";
+		i2c7 = "/i2c@12CD0000";
+		i2c8 = "/i2c@12E00000";
+		i2c9 = "/i2c@12E10000";
+		i2c10 = "/i2c@12E20000";
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+		pinctrl4 = &pinctrl_4;
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		xhci0 = "/xhci@12000000";
+		xhci1 = "/xhci@12400000";
+	};
+
+	adc@12D10000 {
+		compatible = "samsung,exynos-adc-v2";
+		reg = <0x12D10000 0x100>;
+		interrupts = <0 106 0>;
+		status = "disabled";
+	};
+
+	hsi2c_4: i2c@12CA0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CA0000 0x100>;
+		interrupts = <0 60 0>;
+	};
+
+	i2c@12CB0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CB0000 0x100>;
+		interrupts = <0 61 0>;
+	};
+
+	i2c@12CC0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CC0000 0x100>;
+		interrupts = <0 62 0>;
+	};
+
+	i2c@12CD0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CD0000 0x100>;
+		interrupts = <0 63 0>;
+	};
+
+	i2c@12E00000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E00000 0x100>;
+		interrupts = <0 87 0>;
+	};
+
+	i2c@12E10000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E10000 0x100>;
+		interrupts = <0 88 0>;
+	};
+
+	i2c@12E20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E20000 0x100>;
+		interrupts = <0 203 0>;
+	};
+
+	i2s0: i2s@3830000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x03830000 0x100>;
+		#sound-dai-cells = <1>;
+		samsung,idma-addr = <0x03000000>;
+		samsung,i2s-epll-clock-frequency = <192000000>;
+		samsung,i2s-sampling-rate = <48000>;
+		samsung,i2s-bits-per-sample = <16>;
+		samsung,i2s-channels = <2>;
+		samsung,i2s-lr-clk-framesize = <256>;
+		samsung,i2s-bit-clk-framesize = <32>;
+		samsung,i2s-id = <0>;
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	fimdm0_sysmmu@0x14640000 {
+		compatible = "samsung,sysmmu-v3.3";
+		reg = <0x14640000 0x100>;
+	};
+
+	fimdm1_sysmmu@0x14680000 {
+		compatible = "samsung,sysmmu-v3.3";
+		reg = <0x14680000 0x100>;
+	};
+
+	pinctrl_0: pinctrl@13400000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+
+		wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@13410000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x13410000 0x1000>;
+		interrupts = <0 78 0>;
+	};
+
+	pinctrl_2: pinctrl@14000000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x14000000 0x1000>;
+		interrupts = <0 46 0>;
+	};
+
+	pinctrl_3: pinctrl@14010000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x14010000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_4: pinctrl@03860000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	fimd@14400000 {
+		/* sysmmu is not used in U-Boot */
+		samsung,disable-sysmmu;
+		samsung,pwm-out-gpio = <&gpb2 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	dp: dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	dmc {
+		mem-type = "ddr3";
+	};
+
+	pwm: pwm@12dd0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12dd0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+	};
+
+	xhci1: xhci@12400000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12500000 0x100>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos5800-peach-pi.dts b/roms/u-boot/arch/arm/dts/exynos5800-peach-pi.dts
new file mode 100644
index 000000000..63c0b186e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos5800-peach-pi.dts
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SAMSUNG/GOOGLE Peach-Pit board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos54xx.dtsi"
+
+/ {
+	model = "Samsung/Google Peach Pi board based on Exynos5800";
+	cpu-model = "Exynos5800";
+
+	compatible = "google,pit-rev#", "google,pit",
+		"google,peach", "samsung,exynos5800", "samsung,exynos5";
+
+	config {
+		google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+		hwid = "PIT TEST A-A 7848";
+		lazy-init = <1>;
+	};
+
+	aliases {
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		pmic = "/i2c@12CA0000";
+		i2c104 = &i2c_tunnel;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+		power-supply = <&tps65090_fet1>;
+	};
+
+	panel: panel {
+		compatible = "auo,b133htn01";
+		power-supply = <&tps65090_fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dp_out>;
+			};
+		};
+	};
+
+	dmc {
+		mem-manuf = "samsung";
+		mem-type = "ddr3";
+		clock-frequency = <800000000>;
+		arm-frequency = <900000000>;
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* MAX77802 is on i2c bus 4 */
+	i2c@12CA0000 {
+		clock-frequency = <400000>;
+		power-regulator@9 {
+			compatible = "maxim,max77802-pmic";
+			reg = <0x9>;
+		};
+	};
+
+	sound {
+		compatible = "google,peach-audio-max98090";
+
+		samsung,model = "PEACH-I2S-MAX98090";
+		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>;
+		};
+	};
+
+	i2c@12CD0000 { /* i2c7 */
+		clock-frequency = <100000>;
+		max98090: soundcodec@10 {
+			reg = <0x10>;
+			compatible = "maxim,max98090";
+			#sound-dai-cells = <1>;
+		};
+	};
+
+        sound@3830000 {
+                samsung,codec-type = "max98090";
+        };
+
+	i2c@12E10000 { /* i2c9 */
+		clock-frequency = <400000>;
+		tpm@20 {
+			compatible = "infineon,slb9645tt";
+			reg = <0x20>;
+		};
+	};
+
+	spi@12d30000 { /* spi1 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			reg = <0>;
+
+			/*
+			 * A region for the kernel to store a panic event
+			 * which the firmware will add to the log.
+			*/
+			elog-panic-event-offset = <0x01e00000 0x100000>;
+
+			elog-shrink-size = <0x400>;
+			elog-full-threshold = <0xc00>;
+		};
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	xhci@12400000 {
+		samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <1920>;
+		samsung,vl-row = <1080>;
+		samsung,vl-width = <1920>;
+		samsung,vl-height = <1080>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <80>;
+		samsung,vl-hbpd = <172>;
+		samsung,vl-hfpd = <60>;
+		samsung,vl-vspw = <10>;
+		samsung,vl-vbpd = <25>;
+		samsung,vl-vfpd = <10>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,power-on-delay = <30000>;
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+
+		samsung,bl-en-gpio = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&dp {
+	status = "okay";
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&spi_2 {
+	spi-max-frequency = <3125000>;
+	spi-deactivate-delay = <200>;
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		reg = <0>;
+		spi-half-duplex;
+		spi-max-timeout-ms = <1100>;
+		ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * This describes the flash memory within the EC. Note
+		 * that the STM32L flash erases to 0, not 0xff.
+		 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		flash@8000000 {
+			reg = <0x08000000 0x20000>;
+			erase-value = <0>;
+		};
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/exynos7420-espresso7420.dts b/roms/u-boot/arch/arm/dts/exynos7420-espresso7420.dts
new file mode 100644
index 000000000..c542f25b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos7420-espresso7420.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung Espresso7420 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include "exynos7420.dtsi"
+/ {
+	model = "Samsung Espresso7420 board based on Exynos7420";
+	compatible = "samsung,espresso7420", "samsung,exynos7420";
+
+	aliases {
+		serial2 = "/serial@14C30000";
+		console = "/serial@14C30000";
+		pinctrl0 = "/pinctrl@13470000";
+	};
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/exynos7420.dtsi b/roms/u-boot/arch/arm/dts/exynos7420.dtsi
new file mode 100644
index 000000000..b8bf373e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/exynos7420.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung Exynos7420 SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos7420-clk.h>
+/ {
+	compatible = "samsung,exynos7420";
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		u-boot,dm-pre-reloc;
+		#clock-cells = <0>;
+	};
+
+	clock_topc: clock-controller@10570000 {
+		compatible = "samsung,exynos7-clock-topc";
+		reg = <0x10570000 0x10000>;
+		u-boot,dm-pre-reloc;
+		#clock-cells = <1>;
+		clocks = <&fin_pll>;
+		clock-names = "fin_pll";
+	};
+
+	clock_top0: clock-controller@105d0000 {
+		compatible = "samsung,exynos7-clock-top0";
+		reg = <0x105d0000 0xb000>;
+		u-boot,dm-pre-reloc;
+		#clock-cells = <1>;
+		clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+			 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+			 <&clock_topc DOUT_SCLK_CC_PLL>,
+			 <&clock_topc DOUT_SCLK_MFC_PLL>;
+		clock-names = "fin_pll", "dout_sclk_bus0_pll",
+			      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+			      "dout_sclk_mfc_pll";
+	};
+
+	clock_peric1: clock-controller@14c80000 {
+		compatible = "samsung,exynos7-clock-peric1";
+		reg = <0x14c80000 0xd00>;
+		u-boot,dm-pre-reloc;
+		#clock-cells = <1>;
+		clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
+			 <&clock_top0 CLK_SCLK_UART1>,
+			 <&clock_top0 CLK_SCLK_UART2>,
+			 <&clock_top0 CLK_SCLK_UART3>;
+		clock-names = "fin_pll", "dout_aclk_peric1_66",
+			      "sclk_uart1", "sclk_uart2", "sclk_uart3";
+	};
+
+	pinctrl@13470000 {
+		compatible = "samsung,exynos7420-pinctrl";
+		reg = <0x13470000 0x1000>;
+		u-boot,dm-pre-reloc;
+
+		serial2_bus: serial2-bus {
+			samsung,pins = "gpd1-4", "gpd1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	serial@14C30000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x14C30000 0x100>;
+		u-boot,dm-pre-reloc;
+		clocks = <&clock_peric1 PCLK_UART2>,
+			 <&clock_peric1 SCLK_UART2>;
+		clock-names = "uart", "clk_uart_baud0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&serial2_bus>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8-ca35.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8-ca35.dtsi
new file mode 100644
index 000000000..9af8b1511
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8-ca35.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <dt-bindings/clock/imx8qxp-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/{
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters having 4 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			#cooling-cells = <2>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			#cooling-cells = <2>;
+		};
+
+		A35_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			#cooling-cells = <2>;
+		};
+
+		A35_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			#cooling-cells = <2>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7
+			(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, <&A35_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+		cpu_suspend   = <0xc4000001>;
+		cpu_off	      = <0xc4000002>;
+		cpu_on	      = <0xc4000003>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8-ca53.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8-ca53.dtsi
new file mode 100644
index 000000000..6a2292a51
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8-ca53.dtsi
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/{
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0000000>;
+				entry-latency-us = <700>;
+				exit-latency-us = <250>;
+				min-residency-us = <1000>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1000000>;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
+		/* We have 1 clusters having 4 Cortex-A53 cores */
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+		cpu_suspend   = <0xc4000001>;
+		cpu_off	      = <0xc4000002>;
+		cpu_on	      = <0xc4000003>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8dx.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8dx.dtsi
new file mode 100644
index 000000000..7d95cf0b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8dx.dtsi
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "fsl-imx8-ca35.dtsi"
+#include <dt-bindings/soc/imx_rsrc.h>
+#include <dt-bindings/soc/imx8_pd.h>
+#include <dt-bindings/clock/imx8qxp-clock.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Freescale i.MX8DX";
+	compatible = "fsl,imx8dx", "fsl,imx8qxp";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		serial0 = &lpuart0;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+		      /* DRAM space - 1, size : 1 GB DRAM */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * reserved-memory layout
+		 * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
+		 * Shouldn't be used at A core and Linux side.
+		 *
+		 */
+		decoder_boot: decoder_boot@0x84000000 {
+			no-map;
+			reg = <0 0x84000000 0 0x2000000>;
+		};
+		encoder_boot: encoder_boot@0x86000000 {
+			no-map;
+			reg = <0 0x86000000 0 0x2000000>;
+		};
+		rpmsg_reserved: rpmsg@0x90000000 {
+			no-map;
+			reg = <0 0x90000000 0 0x400000>;
+		};
+		decoder_rpc: decoder_rpc@0x90400000 {
+			no-map;
+			reg = <0 0x90400000 0 0x1000000>;
+		};
+		encoder_rpc: encoder_rpc@0x91400000 {
+			no-map;
+			reg = <0 0x91400000 0 0x1000000>;
+		};
+		dsp_reserved: dsp@0x92400000 {
+			no-map;
+			reg = <0 0x92400000 0 0x2000000>;
+		};
+		decoder_str: str@0x94400000 {
+			no-map;
+			reg = <0 0x94400000 0 0x1800000>;
+		};
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x28000000>;
+			alloc-ranges = <0 0x96000000 0 0x28000000>;
+			linux,cma-default;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	mu: mu@5d1c0000 {
+		compatible = "fsl,imx8-mu";
+		reg = <0x0 0x5d1c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		status = "okay";
+
+		clk: clk {
+			compatible = "fsl,imx8qxp-clk";
+			#clock-cells = <1>;
+		};
+
+		iomuxc: iomuxc {
+			compatible = "fsl,imx8qxp-iomuxc";
+		};
+	};
+
+	imx8qx-pm {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pd_lsio: PD_LSIO {
+			compatible = "nxp,imx8-pd";
+			reg = <SC_R_NONE>;
+			#power-domain-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_lsio_gpio0: PD_LSIO_GPIO_0 {
+				reg = <SC_R_GPIO_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio1: PD_LSIO_GPIO_1 {
+				reg = <SC_R_GPIO_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio2: PD_LSIO_GPIO_2 {
+				reg = <SC_R_GPIO_2>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio3: PD_LSIO_GPIO_3 {
+				reg = <SC_R_GPIO_3>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio4: PD_LSIO_GPIO_4 {
+				reg = <SC_R_GPIO_4>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio5: PD_LSIO_GPIO_5{
+				reg = <SC_R_GPIO_5>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio6: PD_LSIO_GPIO_6 {
+				reg = <SC_R_GPIO_6>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio7: PD_LSIO_GPIO_7 {
+				reg = <SC_R_GPIO_7>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+		};
+
+		pd_conn: PD_CONN {
+			compatible = "nxp,imx8-pd";
+			reg = <SC_R_NONE>;
+			#power-domain-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_conn_sdch0: PD_CONN_SDHC_0 {
+				reg = <SC_R_SDHC_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+			};
+			pd_conn_sdch1: PD_CONN_SDHC_1 {
+				reg = <SC_R_SDHC_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+			};
+			pd_conn_sdch2: PD_CONN_SDHC_2 {
+				reg = <SC_R_SDHC_2>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+			};
+			pd_conn_enet0: PD_CONN_ENET_0 {
+				reg = <SC_R_ENET_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+			};
+			pd_conn_enet1: PD_CONN_ENET_1 {
+				reg = <SC_R_ENET_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+			};
+		};
+
+		pd_dma: PD_DMA {
+			compatible = "nxp,imx8-pd";
+			reg = <SC_R_NONE>;
+			#power-domain-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_dma_lpi2c0: PD_DMA_I2C_0 {
+				reg = <SC_R_I2C_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpi2c1: PD_DMA_I2C_1 {
+				reg = <SC_R_I2C_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpi2c2:PD_DMA_I2C_2 {
+				reg = <SC_R_I2C_2>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpi2c3: PD_DMA_I2C_3 {
+				reg = <SC_R_I2C_3>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpuart0: PD_DMA_UART0 {
+				reg = <SC_R_UART_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+				wakeup-irq = <225>;
+			};
+			pd_dma_lpuart1: PD_DMA_UART1 {
+				reg = <SC_R_UART_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpuart2: PD_DMA_UART2 {
+				reg = <SC_R_UART_2>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpuart3: PD_DMA_UART3 {
+				reg = <SC_R_UART_3>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+		};
+	};
+
+	i2c0: i2c@5a800000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a800000 0x0 0x4000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QXP_I2C0_CLK>,
+			<&clk IMX8QXP_I2C0_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QXP_I2C0_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@5a810000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a810000 0x0 0x4000>;
+		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QXP_I2C1_CLK>,
+			<&clk IMX8QXP_I2C1_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QXP_I2C1_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@5a820000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a820000 0x0 0x4000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QXP_I2C2_CLK>,
+			<&clk IMX8QXP_I2C2_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QXP_I2C2_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@5a830000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a830000 0x0 0x4000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QXP_I2C3_CLK>,
+			<&clk IMX8QXP_I2C3_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QXP_I2C3_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	gpio0: gpio@5d080000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d080000 0x0 0x10000>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@5d090000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d090000 0x0 0x10000>;
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio1>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@5d0a0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@5d0b0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0b0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio3>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio4: gpio@5d0c0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio5: gpio@5d0d0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0d0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio5>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio6: gpio@5d0e0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio6>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio7: gpio@5d0f0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0f0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	lpuart0: serial@5a060000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a060000 0x0 0x1000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QXP_UART0_CLK>,
+			 <&clk IMX8QXP_UART0_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QXP_UART0_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart0>;
+		status = "disabled";
+	};
+
+	lpuart1: serial@5a070000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a070000 0x0 0x1000>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QXP_UART1_CLK>,
+			 <&clk IMX8QXP_UART1_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QXP_UART1_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart1>;
+		status = "disabled";
+	};
+
+	lpuart2: serial@5a080000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a080000 0x0 0x1000>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QXP_UART2_CLK>,
+			 <&clk IMX8QXP_UART2_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QXP_UART2_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart2>;
+		status = "disabled";
+	};
+
+	lpuart3: serial@5a090000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a090000 0x0 0x1000>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QXP_UART3_CLK>,
+			 <&clk IMX8QXP_UART3_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QXP_UART3_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart3>;
+		status = "disabled";
+	};
+
+	usdhc1: usdhc@5b010000 {
+		compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0x5b010000 0x0 0x10000>;
+		clocks = <&clk IMX8QXP_SDHC0_IPG_CLK>,
+			<&clk IMX8QXP_SDHC0_CLK>,
+			<&clk IMX8QXP_CLK_DUMMY>;
+		clock-names = "ipg", "per", "ahb";
+		assigned-clocks = <&clk IMX8QXP_SDHC0_SEL>, <&clk IMX8QXP_SDHC0_DIV>;
+		assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>;
+		assigned-clock-rates = <0>, <400000000>;
+		power-domains = <&pd_conn_sdch0>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step= <2>;
+		status = "disabled";
+	};
+
+	usdhc2: usdhc@5b020000 {
+		compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0x5b020000 0x0 0x10000>;
+		clocks = <&clk IMX8QXP_SDHC1_IPG_CLK>,
+			<&clk IMX8QXP_SDHC1_CLK>,
+			<&clk IMX8QXP_CLK_DUMMY>;
+		clock-names = "ipg", "per", "ahb";
+		assigned-clocks = <&clk IMX8QXP_SDHC1_SEL>, <&clk IMX8QXP_SDHC1_DIV>;
+		assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>;
+		assigned-clock-rates = <0>, <200000000>;
+		power-domains = <&pd_conn_sdch1>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step= <2>;
+		status = "disabled";
+	};
+
+	usdhc3: usdhc@5b030000 {
+		compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0x5b030000 0x0 0x10000>;
+		clocks = <&clk IMX8QXP_SDHC2_IPG_CLK>,
+			<&clk IMX8QXP_SDHC2_CLK>,
+			<&clk IMX8QXP_CLK_DUMMY>;
+		clock-names = "ipg", "per", "ahb";
+		assigned-clocks = <&clk IMX8QXP_SDHC2_SEL>, <&clk IMX8QXP_SDHC2_DIV>;
+		assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>;
+		assigned-clock-rates = <0>, <200000000>;
+		power-domains = <&pd_conn_sdch2>;
+		status = "disabled";
+	};
+
+	fec1: ethernet@5b040000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx8qm-fec";
+		reg = <0x0 0x5b040000 0x0 0x10000>;
+		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QXP_ENET0_IPG_CLK>, <&clk IMX8QXP_ENET0_AHB_CLK>,
+			<&clk IMX8QXP_ENET0_RGMII_TX_CLK>, <&clk IMX8QXP_ENET0_PTP_CLK>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		assigned-clocks = <&clk IMX8QXP_ENET0_REF_DIV>, <&clk IMX8QXP_ENET0_PTP_CLK>;
+		assigned-clock-rates = <125000000>, <125000000>;
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		power-domains = <&pd_conn_enet0>;
+		status = "disabled";
+	};
+
+	fec2: ethernet@5b050000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx8qm-fec";
+		reg = <0x0 0x5b050000 0x0 0x10000>;
+		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QXP_ENET1_IPG_CLK>, <&clk IMX8QXP_ENET1_AHB_CLK>,
+			<&clk IMX8QXP_ENET1_RGMII_TX_CLK>, <&clk IMX8QXP_ENET1_PTP_CLK>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		assigned-clocks = <&clk IMX8QXP_ENET1_REF_DIV>, <&clk IMX8QXP_ENET1_PTP_CLK>;
+		assigned-clock-rates = <125000000>, <125000000>;
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		power-domains = <&pd_conn_enet1>;
+		status = "disabled";
+	};
+
+	tsens: thermal-sensor {
+		compatible = "nxp,imx8qxp-sc-tsens";
+		/* number of the temp sensor on the chip */
+		tsens-num = <2>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	thermal_zones: thermal-zones {
+		/* cpu thermal */
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			/*the slope and offset of the temp sensor */
+			thermal-sensors = <&tsens 0>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		drc-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens 1>;
+			status = "disabled";
+			trips {
+				drc_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				drc_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&A35_0 {
+	clocks = <&clk IMX8QXP_A35_DIV>;
+};
+
+/delete-node/ &A35_2;
+/delete-node/ &A35_3;
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8dxp.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8dxp.dtsi
new file mode 100644
index 000000000..cc688f446
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8dxp.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include "fsl-imx8dx.dtsi"
+
+/ {
+	model = "Freescale i.MX8DXP";
+	compatible = "fsl,imx8dxp", "fsl,imx8qxp";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
new file mode 100644
index 000000000..956d72497
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+&mu {
+	u-boot,dm-pre-proper;
+};
+
+&clk {
+	u-boot,dm-pre-proper;
+};
+
+&iomuxc {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio1 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio2 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio3 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio4 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio5 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio6 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio7 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma_lpuart1 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch1 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch2 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio0 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio1 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio2 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio3 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio4 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio5 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio6 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio7 {
+	u-boot,dm-pre-proper;
+};
+
+&lpuart0 {
+	u-boot,dm-pre-proper;
+};
+
+&lpuart1 {
+	u-boot,dm-pre-proper;
+};
+
+&lpuart2 {
+	u-boot,dm-pre-proper;
+};
+
+&lpuart3 {
+	u-boot,dm-pre-proper;
+};
+
+&usdhc1 {
+	u-boot,dm-pre-proper;
+};
+
+&usdhc2 {
+	u-boot,dm-pre-proper;
+};
+
+&usdhc3 {
+	u-boot,dm-pre-proper;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qm-apalis.dts b/roms/u-boot/arch/arm/dts/fsl-imx8qm-apalis.dts
new file mode 100644
index 000000000..0d8d3b3e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qm-apalis.dts
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2017-2019 Toradex
+ */
+
+/dts-v1/;
+
+/* First 128KB is for PSCI ATF. */
+/memreserve/ 0x80000000 0x00020000;
+
+#include "fsl-imx8qm.dtsi"
+#include "fsl-imx8qm-apalis-u-boot.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8";
+	compatible = "toradex,apalis-imx8", "fsl,imx8qm";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200 earlycon=lpuart32,0x5a070000,115200";
+		stdout-path = &lpuart1;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio12>, <&pinctrl_gpio34>, <&pinctrl_gpio56>,
+		    <&pinctrl_gpio7>, <&pinctrl_gpio8>, <&pinctrl_gpio_bkl_on>,
+		    <&pinctrl_gpio_keys>, <&pinctrl_gpio_pwm0>,
+		    <&pinctrl_gpio_pwm1>, <&pinctrl_gpio_pwm2>,
+		    <&pinctrl_gpio_pwm3>, <&pinctrl_gpio_pwm_bkl>,
+		    <&pinctrl_gpio_usbh_en>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_gpio_usbo1_en>, <&pinctrl_gpio_usbo1_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>,
+		    <&pinctrl_sim0_gpios>, <&pinctrl_usdhc1_gpios>;
+
+	apalis-imx8 {
+		pinctrl_gpio12: gpio12grp {
+			fsl,pins = <
+				/* Apalis GPIO1 */
+				SC_P_M40_GPIO0_00_LSIO_GPIO0_IO08		0x06000021
+				/* Apalis GPIO2 */
+				SC_P_M40_GPIO0_01_LSIO_GPIO0_IO09		0x06000021
+			>;
+		};
+
+		pinctrl_gpio34: gpio34grp {
+			fsl,pins = <
+				/* Apalis GPIO3 */
+				SC_P_M41_GPIO0_00_LSIO_GPIO0_IO12		0x06000021
+				/* Apalis GPIO4 */
+				SC_P_M41_GPIO0_01_LSIO_GPIO0_IO13		0x06000021
+			>;
+		};
+
+		pinctrl_gpio56: gpio56grp {
+			fsl,pins = <
+				/* Apalis GPIO5 */
+				SC_P_FLEXCAN2_RX_LSIO_GPIO4_IO01		0x06000021
+				/* Apalis GPIO6 */
+				SC_P_FLEXCAN2_TX_LSIO_GPIO4_IO02		0x06000021
+			>;
+		};
+
+		pinctrl_gpio7: gpio7 {
+			fsl,pins = <
+				/* Apalis GPIO7 */
+				SC_P_MLB_SIG_LSIO_GPIO3_IO26			0x00000021
+			>;
+		};
+
+		pinctrl_gpio8: gpio8 {
+			fsl,pins = <
+				/* Apalis GPIO8 */
+				SC_P_MLB_DATA_LSIO_GPIO3_IO28			0x00000021
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keys {
+			fsl,pins = <
+				/* Apalis WAKE1_MICO */
+				SC_P_SPI3_CS0_LSIO_GPIO2_IO20		0x06000021
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD	0x000014a0 /* Use pads in 3.3V mode */
+				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x06000020
+				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x06000020
+				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x06000020
+				SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x06000020
+				SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x06000020
+				SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x06000020
+				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x06000020
+				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x06000020
+				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x06000020
+				SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x06000020
+				SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020
+				/* ETH_RESET# */
+				SC_P_LVDS1_GPIO01_LSIO_GPIO1_IO11		0x06000020
+			>;
+		};
+
+		pinctrl_gpio_bkl_on: gpio-bkl-on {
+			fsl,pins = <
+				/* Apalis BKL_ON */
+				SC_P_LVDS0_GPIO00_LSIO_GPIO1_IO04	0x00000021
+			>;
+		};
+
+		/* Apalis I2C2 (DDC) */
+		pinctrl_lpi2c0: lpi2c0grp {
+			fsl,pins = <
+				SC_P_HDMI_TX0_TS_SCL_DMA_I2C0_SCL	0x04000022
+				SC_P_HDMI_TX0_TS_SDA_DMA_I2C0_SDA	0x04000022
+			>;
+		};
+
+		pinctrl_cam1_gpios: cam1gpiosgrp {
+			fsl,pins = <
+				/* Apalis CAM1_D7 */
+				SC_P_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20	0x00000021
+				/* Apalis CAM1_D6 */
+				SC_P_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21	0x00000021
+				/* Apalis CAM1_D5 */
+				SC_P_ESAI0_TX0_LSIO_GPIO2_IO26		0x00000021
+				/* Apalis CAM1_D4 */
+				SC_P_ESAI0_TX1_LSIO_GPIO2_IO27		0x00000021
+				/* Apalis CAM1_D3 */
+				SC_P_ESAI0_TX2_RX3_LSIO_GPIO2_IO28	0x00000021
+				/* Apalis CAM1_D2 */
+				SC_P_ESAI0_TX3_RX2_LSIO_GPIO2_IO29	0x00000021
+				/* Apalis CAM1_D1 */
+				SC_P_ESAI0_TX4_RX1_LSIO_GPIO2_IO30	0x00000021
+				/* Apalis CAM1_D0 */
+				SC_P_ESAI0_TX5_RX0_LSIO_GPIO2_IO31	0x00000021
+				/* Apalis CAM1_PCLK */
+				SC_P_MCLK_IN0_LSIO_GPIO3_IO00		0x00000021
+				/* Apalis CAM1_MCLK */
+				SC_P_SPI3_SDO_LSIO_GPIO2_IO18		0x00000021
+				/* Apalis CAM1_VSYNC */
+				SC_P_ESAI0_SCKR_LSIO_GPIO2_IO24		0x00000021
+				/* Apalis CAM1_HSYNC */
+				SC_P_ESAI0_SCKT_LSIO_GPIO2_IO25		0x00000021
+			>;
+		};
+
+		pinctrl_dap1_gpios: dap1gpiosgrp {
+			fsl,pins = <
+				/* Apalis DAP1_MCLK */
+				SC_P_SPI3_SDI_LSIO_GPIO2_IO19			0x00000021
+				/* Apalis DAP1_D_OUT */
+				SC_P_SAI1_RXC_LSIO_GPIO3_IO12			0x00000021
+				/* Apalis DAP1_RESET */
+				SC_P_ESAI1_SCKT_LSIO_GPIO2_IO07			0x00000021
+				/* Apalis DAP1_BIT_CLK */
+				SC_P_SPI0_CS1_LSIO_GPIO3_IO06			0x00000021
+				/* Apalis DAP1_D_IN */
+				SC_P_SAI1_RXFS_LSIO_GPIO3_IO14			0x00000021
+				/* Apalis DAP1_SYNC */
+				SC_P_SPI2_CS1_LSIO_GPIO3_IO11			0x00000021
+				/* Wi-Fi_I2S_EN# */
+				SC_P_ESAI1_TX5_RX0_LSIO_GPIO2_IO13		0x00000021
+			>;
+		};
+
+		pinctrl_esai0_gpios: esai0gpiosgrp {
+			fsl,pins = <
+				/* Apalis LCD1_G1 */
+				SC_P_ESAI0_FSR_LSIO_GPIO2_IO22			0x00000021
+				/* Apalis LCD1_G2 */
+				SC_P_ESAI0_FST_LSIO_GPIO2_IO23			0x00000021
+			>;
+		};
+
+		pinctrl_fec2_gpios: fec2gpiosgrp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD	0x000014a0
+				/* Apalis LCD1_R1 */
+				SC_P_ENET1_MDC_LSIO_GPIO4_IO18			0x00000021
+				/* Apalis LCD1_R0 */
+				SC_P_ENET1_MDIO_LSIO_GPIO4_IO17			0x00000021
+				/* Apalis LCD1_G0 */
+				SC_P_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16	0x00000021
+				/* Apalis LCD1_R7 */
+				SC_P_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17		0x00000021
+				/* Apalis LCD1_DE */
+				SC_P_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18		0x00000021
+				/* Apalis LCD1_HSYNC */
+				SC_P_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19		0x00000021
+				/* Apalis LCD1_VSYNC */
+				SC_P_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20		0x00000021
+				/* Apalis LCD1_PCLK */
+				SC_P_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21		0x00000021
+				/* Apalis LCD1_R6 */
+				SC_P_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11		0x00000021
+				/* Apalis LCD1_R5 */
+				SC_P_ENET1_RGMII_TXC_LSIO_GPIO6_IO10		0x00000021
+				/* Apalis LCD1_R4 */
+				SC_P_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12		0x00000021
+				/* Apalis LCD1_R3 */
+				SC_P_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13		0x00000021
+				/* Apalis LCD1_R2 */
+				SC_P_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14		0x00000021
+			>;
+		};
+
+		pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpio {
+			fsl,pins = <
+				/* Apalis TS_2 */
+				SC_P_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06		0x00000021
+			>;
+		};
+
+		pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp {
+			fsl,pins = <
+				/* Apalis LCD1_G6 */
+				SC_P_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12		0x00000021
+				/* Apalis LCD1_G7 */
+				SC_P_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13		0x00000021
+			>;
+		};
+
+		pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp {
+			fsl,pins = <
+				/* Apalis TS_4 */
+				SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22		0x00000021
+			>;
+		};
+
+		pinctrl_mlb_gpios: mlbgpiosgrp {
+			fsl,pins = <
+				/* Apalis TS_1 */
+				SC_P_MLB_CLK_LSIO_GPIO3_IO27			0x00000021
+			>;
+		};
+
+		pinctrl_qspi1a_gpios: qspi1agpiosgrp {
+			fsl,pins = <
+				/* Apalis LCD1_B0 */
+				SC_P_QSPI1A_DATA0_LSIO_GPIO4_IO26		0x00000021
+				/* Apalis LCD1_B1 */
+				SC_P_QSPI1A_DATA1_LSIO_GPIO4_IO25		0x00000021
+				/* Apalis LCD1_B2 */
+				SC_P_QSPI1A_DATA2_LSIO_GPIO4_IO24		0x00000021
+				/* Apalis LCD1_B3 */
+				SC_P_QSPI1A_DATA3_LSIO_GPIO4_IO23		0x00000021
+				/* Apalis LCD1_B5 */
+				SC_P_QSPI1A_DQS_LSIO_GPIO4_IO22			0x00000021
+				/* Apalis LCD1_B7 */
+				SC_P_QSPI1A_SCLK_LSIO_GPIO4_IO21		0x00000021
+				/* Apalis LCD1_B4 */
+				SC_P_QSPI1A_SS0_B_LSIO_GPIO4_IO19		0x00000021
+				/* Apalis LCD1_B6 */
+				SC_P_QSPI1A_SS1_B_LSIO_GPIO4_IO20		0x00000021
+			>;
+		};
+
+		pinctrl_sim0_gpios: sim0gpiosgrp {
+			fsl,pins = <
+				/* Apalis LCD1_G5 */
+				SC_P_SIM0_CLK_LSIO_GPIO0_IO00			0x00000021
+				/* Apalis LCD1_G3 */
+				SC_P_SIM0_GPIO0_00_LSIO_GPIO0_IO05		0x00000021
+				/* Apalis TS_5 */
+				SC_P_SIM0_IO_LSIO_GPIO0_IO02			0x00000021
+				/* Apalis LCD1_G4 */
+				SC_P_SIM0_RST_LSIO_GPIO0_IO01			0x00000021
+			>;
+		};
+
+		pinctrl_usdhc1_gpios: usdhc1gpiosgrp {
+			fsl,pins = <
+				/* Apalis TS_6 */
+				SC_P_USDHC1_STROBE_LSIO_GPIO5_IO23		0x00000021
+			>;
+		};
+
+		pinctrl_mipi_dsi_0_1_en: mipi_dsi_0_1_en {
+			fsl,pins = <
+				/* Apalis TS_3 */
+				SC_P_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07		0x00000021
+			>;
+		};
+
+		/* On-module I2C */
+		pinctrl_lpi2c1: lpi2c1grp {
+			fsl,pins = <
+				SC_P_GPT0_CLK_DMA_I2C1_SCL		0x04000020
+				SC_P_GPT0_CAPTURE_DMA_I2C1_SDA		0x04000020
+			>;
+		};
+
+		/* Apalis I2C1 */
+		pinctrl_lpi2c2: lpi2c2grp {
+			fsl,pins = <
+				SC_P_GPT1_CLK_DMA_I2C2_SCL		0x04000020
+				SC_P_GPT1_CAPTURE_DMA_I2C2_SDA		0x04000020
+			>;
+		};
+
+		/* Apalis I2C3 (CAM) */
+		pinctrl_lpi2c3: lpi2c3grp {
+			fsl,pins = <
+				SC_P_SIM0_PD_DMA_I2C3_SCL		0x04000020
+				SC_P_SIM0_POWER_EN_DMA_I2C3_SDA		0x04000020
+			>;
+		};
+
+		/* Apalis UART3 */
+		pinctrl_lpuart0: lpuart0grp {
+			fsl,pins = <
+				SC_P_UART0_RX_DMA_UART0_RX		0x06000020
+				SC_P_UART0_TX_DMA_UART0_TX		0x06000020
+			>;
+		};
+
+		/* Apalis UART1 */
+		pinctrl_lpuart1: lpuart1grp {
+			fsl,pins = <
+				SC_P_UART1_RX_DMA_UART1_RX		0x06000020
+				SC_P_UART1_TX_DMA_UART1_TX		0x06000020
+				SC_P_UART1_CTS_B_DMA_UART1_CTS_B	0x06000020
+				SC_P_UART1_RTS_B_DMA_UART1_RTS_B	0x06000020
+			>;
+		};
+
+		pinctrl_lpuart1ctrl: lpuart1ctrlgrp {
+			fsl,pins = <
+				/* Apalis UART1_DTR */
+				SC_P_M40_I2C0_SCL_LSIO_GPIO0_IO06	0x00000021
+				/* Apalis UART1_DSR */
+				SC_P_M40_I2C0_SDA_LSIO_GPIO0_IO07	0x00000021
+				/* Apalis UART1_DCD */
+				SC_P_M41_I2C0_SCL_LSIO_GPIO0_IO10	0x00000021
+				/* Apalis UART1_RI */
+				SC_P_M41_I2C0_SDA_LSIO_GPIO0_IO11	0x00000021
+			>;
+		};
+
+		/* Apalis UART4 */
+		pinctrl_lpuart2: lpuart2grp {
+			fsl,pins = <
+				SC_P_LVDS0_I2C1_SCL_DMA_UART2_TX	0x06000020
+				SC_P_LVDS0_I2C1_SDA_DMA_UART2_RX	0x06000020
+			>;
+		};
+
+		/* Apalis UART2 */
+		pinctrl_lpuart3: lpuart3grp {
+			fsl,pins = <
+				SC_P_LVDS1_I2C1_SCL_DMA_UART3_TX	0x06000020
+				SC_P_LVDS1_I2C1_SDA_DMA_UART3_RX	0x06000020
+				SC_P_ENET1_RGMII_TXD3_DMA_UART3_RTS_B	0x06000020
+				SC_P_ENET1_RGMII_RXC_DMA_UART3_CTS_B	0x06000020
+			>;
+		};
+
+		/* Apalis PWM3 */
+		pinctrl_gpio_pwm0: gpiopwm0grp {
+			fsl,pins = <
+				SC_P_UART0_RTS_B_LSIO_GPIO0_IO22	0x00000021
+			>;
+		};
+
+		/* Apalis PWM4 */
+		pinctrl_gpio_pwm1: gpiopwm1grp {
+			fsl,pins = <
+				SC_P_UART0_CTS_B_LSIO_GPIO0_IO23	0x00000021
+			>;
+		};
+
+		/* Apalis PWM1 */
+		pinctrl_gpio_pwm2: gpiopwm2grp {
+			fsl,pins = <
+				SC_P_GPT1_COMPARE_LSIO_GPIO0_IO19	0x00000021
+			>;
+		};
+
+		/* Apalis PWM2 */
+		pinctrl_gpio_pwm3: gpiopwm3grp {
+			fsl,pins = <
+				SC_P_GPT0_COMPARE_LSIO_GPIO0_IO16	0x00000021
+			>;
+		};
+
+		/* Apalis BKL1_PWM */
+		pinctrl_gpio_pwm_bkl: gpiopwmbklgrp {
+			fsl,pins = <
+				SC_P_LVDS1_GPIO00_LVDS1_GPIO0_IO00	0x00000021
+			>;
+		};
+
+		/* Apalis USBH_EN */
+		pinctrl_gpio_usbh_en: gpiousbhen {
+			fsl,pins = <
+				SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04	0x06000060
+			>;
+		};
+
+		/* Apalis USBH_OC# */
+		pinctrl_gpio_usbh_oc_n: gpiousbhocn {
+			fsl,pins = <
+				SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06	0x06000060
+			>;
+		};
+
+		/* Apalis USBO1_EN */
+		pinctrl_gpio_usbo1_en: gpiousbo1en {
+			fsl,pins = <
+				SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03	0x06000060
+			>;
+		};
+
+		/* Apalis USBO1_OC# */
+		pinctrl_gpio_usbo1_oc_n: gpiousbo1ocn {
+			fsl,pins = <
+				SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05	0x06000060
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x06000041
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+			>;
+		};
+
+		pinctrl_sata1_act: sata1actgrp {
+			fsl,pins = <
+				/* Apalis SATA1_ACT# */
+				SC_P_ESAI1_TX0_LSIO_GPIO2_IO08		0x00000021
+			>;
+		};
+
+		pinctrl_mmc1_cd: mmc1cdgrp {
+			fsl,pins = <
+				/* Apalis MMC1_CD# */
+				SC_P_ESAI1_TX1_LSIO_GPIO2_IO09		0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_USDHC1_DATA4_CONN_USDHC1_DATA4	0x00000021
+				SC_P_USDHC1_DATA5_CONN_USDHC1_DATA5	0x00000021
+				SC_P_USDHC1_DATA6_CONN_USDHC1_DATA6	0x00000021
+				SC_P_USDHC1_DATA7_CONN_USDHC1_DATA7	0x00000021
+				/* On-module PMIC use */
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+			>;
+		};
+
+		pinctrl_sd1_cd: sd1cdgrp {
+			fsl,pins = <
+				/* Apalis SD1_CD# */
+				SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				SC_P_USDHC2_CLK_CONN_USDHC2_CLK		0x06000041
+				SC_P_USDHC2_CMD_CONN_USDHC2_CMD		0x00000021
+				SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0	0x00000021
+				SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1	0x00000021
+				SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2	0x00000021
+				SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3	0x00000021
+				/* On-module PMIC use */
+				SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT	0x00000021
+			>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 11 1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <7>;
+		};
+	};
+};
+
+/* Apalis I2C2 (DDC) */
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* On-module I2C */
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_mmc1_cd>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
new file mode 100644
index 000000000..9e0d264b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&{/imx8qm-pm} {
+
+	u-boot,dm-spl;
+};
+
+&mu {
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pd_lsio {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio0 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio1 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio2 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio3 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio4 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio5 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio6 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio7 {
+	u-boot,dm-spl;
+};
+
+&pd_conn {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch0 {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch1 {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch2 {
+	u-boot,dm-spl;
+};
+
+&pd_dma {
+	u-boot,dm-spl;
+};
+
+&pd_dma_lpuart0 {
+	u-boot,dm-spl;
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&gpio6 {
+	u-boot,dm-spl;
+};
+
+&gpio7 {
+	u-boot,dm-spl;
+};
+
+&lpuart0 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+	mmc-hs400-1_8v;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qm-mek.dts b/roms/u-boot/arch/arm/dts/fsl-imx8qm-mek.dts
new file mode 100644
index 000000000..63908ba6b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qm-mek.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017-2018 NXP
+ */
+
+/dts-v1/;
+
+#include "fsl-imx8qm.dtsi"
+#include "fsl-imx8qm-mek-u-boot.dtsi"
+
+/ {
+	model = "Freescale i.MX8QM MEK";
+	compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
+
+	chosen {
+		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
+		stdout-path = &lpuart0;
+	};
+
+	reg_usdhc2_vmmc: usdhc2_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sw-3p3-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay = <4800>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx8qm-mek {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				SC_P_MCLK_OUT0_AUD_ACM_MCLK_OUT0	0x0600004c
+				SC_P_QSPI1A_DATA1_LSIO_GPIO4_IO25	0x0600004c
+				SC_P_SCU_GPIO0_03_LSIO_GPIO0_IO31	0x0600004c
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD	0x000014a0
+				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000061
+				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000061
+				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000061
+				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000061
+				SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000061
+				SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000061
+				SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000061
+				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000061
+				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000061
+				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000061
+				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000061
+				SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000061
+			>;
+		};
+
+		pinctrl_fec2: fec2grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD	0x000014a0
+				SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL	0x00000060
+				SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC	0x00000060
+				SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0	0x00000060
+				SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1	0x00000060
+				SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2	0x00000060
+				SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3	0x00000060
+				SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC	0x00000060
+				SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL	0x00000060
+				SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0	0x00000060
+				SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1	0x00000060
+				SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2	0x00000060
+				SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3	0x00000060
+			>;
+		};
+
+		pinctrl_lpuart0: lpuart0grp {
+			fsl,pins = <
+				SC_P_UART0_RX_DMA_UART0_RX		0x06000020
+				SC_P_UART0_TX_DMA_UART0_TX		0x06000020
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2_gpio: usdhc2grpgpio {
+			fsl,pins = <
+				SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021
+				SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021
+				SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+			>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	fsl,rgmii_rxc_dly;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			at803x,eee-disabled;
+			at803x,vddio-1p8v;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			at803x,eee-disabled;
+			at803x,vddio-1p8v;
+			status = "disabled";
+		};
+	};
+};
+
+&lpuart0 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qm.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8qm.dtsi
new file mode 100644
index 000000000..88aeaf65b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qm.dtsi
@@ -0,0 +1,563 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "fsl-imx8-ca53.dtsi"
+#include <dt-bindings/clock/imx8qm-clock.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/imx_rsrc.h>
+#include <dt-bindings/soc/imx8_pd.h>
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "fsl,imx8qm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		serial4 = &lpuart4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+		      /* DRAM space - 1, size : 1 GB DRAM */
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xC0000>, /* GICR */
+		      <0x0 0x52000000 0 0x2000>,  /* GICC */
+		      <0x0 0x52010000 0 0x1000>,  /* GICH */
+		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	mu: mu@5d1c0000 {
+		compatible = "fsl,imx8-mu";
+		reg = <0x0 0x5d1c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		fsl,scu_ap_mu_id = <0>;
+		status = "okay";
+
+		clk: clk {
+			compatible = "fsl,imx8qm-clk";
+			#clock-cells = <1>;
+		};
+
+		iomuxc: iomuxc {
+			compatible = "fsl,imx8qm-iomuxc";
+		};
+	};
+
+	imx8qm-pm {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pd_lsio: PD_LSIO {
+			compatible = "nxp,imx8-pd";
+			reg = <SC_R_NONE>;
+			#power-domain-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_lsio_gpio0: PD_LSIO_GPIO_0 {
+				reg = <SC_R_GPIO_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio1: PD_LSIO_GPIO_1 {
+				reg = <SC_R_GPIO_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio2: PD_LSIO_GPIO_2 {
+				reg = <SC_R_GPIO_2>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio3: PD_LSIO_GPIO_3 {
+				reg = <SC_R_GPIO_3>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio4: PD_LSIO_GPIO_4 {
+				reg = <SC_R_GPIO_4>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio5: PD_LSIO_GPIO_5{
+				reg = <SC_R_GPIO_5>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio6:PD_LSIO_GPIO_6 {
+				reg = <SC_R_GPIO_6>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+			pd_lsio_gpio7: PD_LSIO_GPIO_7 {
+				reg = <SC_R_GPIO_7>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_lsio>;
+			};
+		};
+
+		pd_conn: PD_CONN {
+			compatible = "nxp,imx8-pd";
+			reg = <SC_R_NONE>;
+			#power-domain-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_conn_sdch0: PD_CONN_SDHC_0 {
+				reg = <SC_R_SDHC_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+			};
+			pd_conn_sdch1: PD_CONN_SDHC_1 {
+				reg = <SC_R_SDHC_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+			};
+			pd_conn_sdch2: PD_CONN_SDHC_2 {
+				reg = <SC_R_SDHC_2>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+			};
+			pd_conn_enet0: PD_CONN_ENET_0 {
+				reg = <SC_R_ENET_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+				wakeup-irq = <258>;
+			};
+			pd_conn_enet1: PD_CONN_ENET_1 {
+				reg = <SC_R_ENET_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_conn>;
+				fsl,wakeup_irq = <262>;
+			};
+		};
+
+		pd_dma: PD_DMA {
+			compatible = "nxp,imx8-pd";
+			reg = <SC_R_NONE>;
+			#power-domain-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_dma_lpi2c0: PD_DMA_I2C_0 {
+				reg = <SC_R_I2C_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpi2c1: PD_DMA_I2C_1 {
+				reg = <SC_R_I2C_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpi2c2:PD_DMA_I2C_2 {
+				reg = <SC_R_I2C_2>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpi2c3: PD_DMA_I2C_3 {
+				reg = <SC_R_I2C_3>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpi2c4: PD_DMA_I2C_4 {
+				reg = <SC_R_I2C_4>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+			};
+			pd_dma_lpuart0: PD_DMA_UART0 {
+				reg = <SC_R_UART_0>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+				wakeup-irq = <345>;
+			};
+			pd_dma_lpuart1: PD_DMA_UART1 {
+				reg = <SC_R_UART_1>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+				wakeup-irq = <346>;
+			};
+			pd_dma_lpuart2: PD_DMA_UART2 {
+				reg = <SC_R_UART_2>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+				wakeup-irq = <347>;
+			};
+			pd_dma_lpuart3: PD_DMA_UART3 {
+				reg = <SC_R_UART_3>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+				wakeup-irq = <348>;
+			};
+			pd_dma_lpuart4: PD_DMA_UART4 {
+				reg = <SC_R_UART_4>;
+				#power-domain-cells = <0>;
+				power-domains = <&pd_dma>;
+				wakeup-irq = <349>;
+			};
+		};
+	};
+
+	i2c0: i2c@5a800000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a800000 0x0 0x4000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QM_I2C0_CLK>,
+			 <&clk IMX8QM_I2C0_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_I2C0_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@5a810000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a810000 0x0 0x4000>;
+		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QM_I2C1_CLK>,
+			 <&clk IMX8QM_I2C1_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_I2C1_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c1>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@5a820000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a820000 0x0 0x4000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QM_I2C2_CLK>,
+			 <&clk IMX8QM_I2C2_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_I2C2_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c2>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@5a830000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a830000 0x0 0x4000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QM_I2C3_CLK>,
+			 <&clk IMX8QM_I2C3_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_I2C3_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c3>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@5a840000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x0 0x5a840000 0x0 0x4000>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&clk IMX8QM_I2C4_CLK>,
+			 <&clk IMX8QM_I2C4_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_I2C4_CLK>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd_dma_lpi2c4>;
+		status = "disabled";
+	};
+
+	gpio0: gpio@5d080000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d080000 0x0 0x10000>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@5d090000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d090000 0x0 0x10000>;
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio1>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@5d0a0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@5d0b0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0b0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio3>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio4: gpio@5d0c0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio5: gpio@5d0d0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0d0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio5>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio6: gpio@5d0e0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio6>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio7: gpio@5d0f0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0f0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		power-domains = <&pd_lsio_gpio7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	lpuart0: serial@5a060000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a060000 0x0 0x1000>;
+		interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QM_UART0_CLK>,
+			 <&clk IMX8QM_UART0_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_UART0_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart0>;
+		status = "disabled";
+	};
+
+	lpuart1: serial@5a070000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a070000 0x0 0x1000>;
+		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QM_UART1_CLK>,
+			 <&clk IMX8QM_UART1_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_UART1_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart1>;
+		status = "disabled";
+	};
+
+	lpuart2: serial@5a080000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a080000 0x0 0x1000>;
+		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QM_UART2_CLK>,
+			 <&clk IMX8QM_UART2_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_UART2_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart2>;
+		status = "disabled";
+	};
+
+	lpuart3: serial@5a090000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a090000 0x0 0x1000>;
+		interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QM_UART3_CLK>,
+			 <&clk IMX8QM_UART3_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_UART3_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart3>;
+		status = "disabled";
+	};
+
+	lpuart4: serial@5a0a0000 {
+		compatible = "fsl,imx8qm-lpuart";
+		reg = <0x0 0x5a0a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QM_UART4_CLK>,
+			 <&clk IMX8QM_UART4_IPG_CLK>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX8QM_UART4_CLK>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd_dma_lpuart4>;
+		status = "disabled";
+	};
+
+	usdhc1: usdhc@5b010000 {
+		compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0x5b010000 0x0 0x10000>;
+		clocks = <&clk IMX8QM_SDHC0_IPG_CLK>,
+			 <&clk IMX8QM_SDHC0_CLK>,
+			 <&clk IMX8QM_CLK_DUMMY>;
+		clock-names = "ipg", "per", "ahb";
+		assigned-clocks = <&clk IMX8QM_SDHC0_DIV>;
+		assigned-clock-rates = <400000000>;
+		power-domains = <&pd_conn_sdch0>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step= <2>;
+		status = "disabled";
+	};
+
+	usdhc2: usdhc@5b020000 {
+		compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0x5b020000 0x0 0x10000>;
+		clocks = <&clk IMX8QM_SDHC1_IPG_CLK>,
+			 <&clk IMX8QM_SDHC1_CLK>,
+			 <&clk IMX8QM_CLK_DUMMY>;
+		clock-names = "ipg", "per", "ahb";
+		assigned-clocks = <&clk IMX8QM_SDHC1_DIV>;
+		assigned-clock-rates = <200000000>;
+		power-domains = <&pd_conn_sdch1>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step= <2>;
+		status = "disabled";
+	};
+
+	usdhc3: usdhc@5b030000 {
+		compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0x5b030000 0x0 0x10000>;
+		clocks = <&clk IMX8QM_SDHC2_IPG_CLK>,
+			 <&clk IMX8QM_SDHC2_CLK>,
+			 <&clk IMX8QM_CLK_DUMMY>;
+		clock-names = "ipg", "per", "ahb";
+		assigned-clocks = <&clk IMX8QM_SDHC2_DIV>;
+		assigned-clock-rates = <200000000>;
+		power-domains = <&pd_conn_sdch2>;
+		status = "disabled";
+	};
+
+	fec1: ethernet@5b040000 {
+		compatible = "fsl,imx8qm-fec", "fsl,imx7d-fec";
+		reg = <0x0 0x5b040000 0x0 0x10000>;
+		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QM_ENET0_IPG_CLK>,
+			 <&clk IMX8QM_ENET0_AHB_CLK>,
+			 <&clk IMX8QM_ENET0_RGMII_TX_CLK>,
+			 <&clk IMX8QM_ENET0_PTP_CLK>,
+			 <&clk IMX8QM_ENET0_TX_CLK>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp",
+			      "enet_2x_txclk";
+		assigned-clocks = <&clk IMX8QM_ENET0_ROOT_DIV>,
+				  <&clk IMX8QM_ENET0_REF_DIV>;
+		assigned-clock-rates = <250000000>, <125000000>;
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		fsl,wakeup_irq = <0>;
+		power-domains = <&pd_conn_enet0>;
+		status = "disabled";
+	};
+
+	fec2: ethernet@5b050000 {
+		compatible = "fsl,imx8qm-fec", "fsl,imx7d-fec";
+		reg = <0x0 0x5b050000 0x0 0x10000>;
+		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX8QM_ENET1_IPG_CLK>,
+			 <&clk IMX8QM_ENET1_AHB_CLK>,
+			 <&clk IMX8QM_ENET1_RGMII_TX_CLK>,
+			 <&clk IMX8QM_ENET1_PTP_CLK>,
+			 <&clk IMX8QM_ENET1_TX_CLK>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp",
+			      "enet_2x_txclk";
+		assigned-clocks = <&clk IMX8QM_ENET1_ROOT_DIV>,
+				  <&clk IMX8QM_ENET1_REF_DIV>;
+		assigned-clock-rates = <250000000>, <125000000>;
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		fsl,wakeup_irq = <0>;
+		power-domains = <&pd_conn_enet1>;
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	clocks = <&clk IMX8QM_A53_DIV>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
new file mode 100644
index 000000000..3ca53bb94
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Linaro Ltd.
+ */
+
+&{/imx8qx-pm} {
+
+	u-boot,dm-spl;
+};
+
+&mu {
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pd_lsio {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio0 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio1 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio2 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio3 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio4 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio5 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio6 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio7 {
+	u-boot,dm-spl;
+};
+
+&pd_conn {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch0 {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch1 {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch2 {
+	u-boot,dm-spl;
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&gpio6 {
+	u-boot,dm-spl;
+};
+
+&gpio7 {
+	u-boot,dm-spl;
+};
+
+&lpuart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp-ai_ml.dts b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-ai_ml.dts
new file mode 100644
index 000000000..aa85caaff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-ai_ml.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "fsl-imx8qxp.dtsi"
+#include "fsl-imx8qxp-ai_ml-u-boot.dtsi"
+
+/ {
+	model = "Einfochips i.MX8QXP AI_ML";
+	compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
+
+	chosen {
+		bootargs = "console=ttyLP2,115200 earlycon=lpuart32,0x5a080000,115200";
+		stdout-path = &lpuart2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,ar8031-phy-fixup;
+	fsl,magic-packet;
+	phy-reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <150>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+/* LS-I2C1 */
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-sd;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD	0x000014a0
+			SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD	0x000014a0
+			SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x06000020
+			SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x06000020
+			SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x06000020
+			SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x06000020
+			SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x06000020
+			SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x06000020
+			SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x06000020
+			SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x06000020
+			SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x06000020
+			SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x06000020
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			SC_P_USB_SS3_TC1_ADMA_I2C1_SCL			0x06000021
+			SC_P_USB_SS3_TC3_ADMA_I2C1_SDA			0x06000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			SC_P_UART0_RX_ADMA_UART0_RX			0X06000020
+			SC_P_UART0_TX_ADMA_UART0_TX			0X06000020
+		>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			SC_P_UART1_RX_ADMA_UART1_RX			0X06000020
+			SC_P_UART1_TX_ADMA_UART1_TX			0X06000020
+		>;
+	};
+
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			SC_P_UART2_RX_ADMA_UART2_RX			0X06000020
+			SC_P_UART2_TX_ADMA_UART2_TX			0X06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			SC_P_FLEXCAN2_RX_ADMA_UART3_RX			0X06000020
+			SC_P_FLEXCAN2_TX_ADMA_UART3_TX			0X06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			SC_P_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+			SC_P_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021
+			SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0		0x00000021
+			SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1		0x00000021
+			SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2		0x00000021
+			SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3		0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			SC_P_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			SC_P_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000021
+			SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000021
+			SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000021
+			SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000021
+			SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi
new file mode 100644
index 000000000..e41911a04
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+&{/imx8qx-pm} {
+
+	u-boot,dm-pre-proper;
+};
+
+&mu {
+	u-boot,dm-pre-proper;
+};
+
+&clk {
+	u-boot,dm-pre-proper;
+};
+
+&iomuxc {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio1 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio2 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio3 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio4 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio5 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio6 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio7 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma_lpuart0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma_lpuart3 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch1 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch2 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_enet0 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio0 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio1 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio2 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio3 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio4 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio5 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio6 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio7 {
+	u-boot,dm-pre-proper;
+};
+
+&lpuart3 {
+	u-boot,dm-pre-proper;
+};
+
+&lpuart0 {
+	u-boot,dm-pre-proper;
+};
+
+&usdhc1 {
+	u-boot,dm-pre-proper;
+	/delete-property/ assigned-clock-parents;
+};
+
+&usdhc2 {
+	u-boot,dm-pre-proper;
+	/delete-property/ assigned-clock-parents;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp-apalis.dts b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-apalis.dts
new file mode 100644
index 000000000..9cb3d3a80
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-apalis.dts
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+/dts-v1/;
+
+#include "fsl-imx8qxp.dtsi"
+#include "fsl-imx8qxp-apalis-u-boot.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8X";
+	compatible = "toradex,apalis-imx8x", "fsl,imx8qxp";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+		stdout-path = &lpuart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_reset_moci>;
+
+	apalis-imx8x {
+		/* Apalis UART1 */
+		pinctrl_lpuart1: lpuart1grp {
+			fsl,pins = <
+				SC_P_UART1_RX_ADMA_UART1_RX		0x06000020	/* SODIMM 118 */
+				SC_P_UART1_TX_ADMA_UART1_TX		0x06000020	/* SODIMM 112 */
+			>;
+		};
+
+		/* On-module Gigabit Ethernet PHY Micrel KSZ9031 */
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD	0x14a0
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD	0x14a0
+				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x61
+				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x61
+				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x61
+				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x61
+				SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x61
+				SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x61
+				SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x61
+				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x61
+				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x61
+				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x61
+				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x61
+				SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x61
+				/* On-module ETH_RESET# */
+				SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04		0x06000020
+				/* On-module ETH_INT# */
+				SC_P_ADC_IN2_LSIO_GPIO1_IO12			0x21
+			>;
+		};
+
+		/* Apalis BKL_ON */
+		pinctrl_gpio_bkl_on: gpio-bkl-on {
+			fsl,pins = <
+				SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13			0x40		/* SODIMM 286 */
+			>;
+		};
+
+		pinctrl_hog0: hog0grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD		0x000514a0
+			>;
+		};
+
+		pinctrl_hog1: hog1grp {
+			fsl,pins = <
+				/* Apalis USBO1_EN */
+				SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16		0x41		/* SODIMM 274 */
+			>;
+		};
+
+		/* Apalis RESET_MOCI# */
+		pinctrl_reset_moci: gpioresetmocigrp {
+			fsl,pins = <
+				SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x21
+			>;
+		};
+
+		/* On-module eMMC */
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD			0x21
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD			0x21
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD			0x21
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21
+			>;
+		};
+
+		/* Apalis MMC1_CD# */
+		pinctrl_usdhc2_gpio: mmc1gpiogrp {
+			fsl,pins = <
+				SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22		0x06000021	/* SODIMM 164 */
+			>;
+		};
+
+		pinctrl_usdhc2_gpio_sleep: usdhc1gpioslpgrp {
+			fsl,pins = <
+				SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22		0x60		/* SODIMM 164 */
+			>;
+		};
+
+		/* Apalis USBH_EN */
+		pinctrl_usbh_en: usbhen {
+			fsl,pins = <
+				SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04		0x40		/* SODIMM 84 */
+			>;
+		};
+
+		/* Apalis MMC1 */
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041	/* SODIMM 154 */
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD			0x21		/* SODIMM 150 */
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 160 */
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM 162 */
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM 144 */
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM 146 */
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041	/* SODIMM 154 */
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD			0x21		/* SODIMM 150 */
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 160 */
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM 162 */
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM 144 */
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM 146 */
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041	/* SODIMM 154 */
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD			0x21		/* SODIMM 150 */
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 160 */
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM 162 */
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM 144 */
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM 146 */
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21
+			>;
+		};
+
+		pinctrl_usdhc2_sleep: usdhc2slpgrp {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_LSIO_GPIO4_IO23			0x60		/* SODIMM 154 */
+				SC_P_USDHC1_CMD_LSIO_GPIO4_IO24			0x60		/* SODIMM 150 */
+				SC_P_USDHC1_DATA0_LSIO_GPIO4_IO25		0x60		/* SODIMM 160 */
+				SC_P_USDHC1_DATA1_LSIO_GPIO4_IO26		0x60		/* SODIMM 162 */
+				SC_P_USDHC1_DATA2_LSIO_GPIO4_IO27		0x60		/* SODIMM 144 */
+				SC_P_USDHC1_DATA3_LSIO_GPIO4_IO28		0x60		/* SODIMM 146 */
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21
+			>;
+		};
+	};
+};
+
+/* Apalis Gigabit LAN */
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <150>;
+	phy-reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+		};
+	};
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	disable-wp;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
new file mode 100644
index 000000000..322429a98
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+&{/imx8qx-pm} {
+
+	u-boot,dm-pre-proper;
+};
+
+&mu {
+	u-boot,dm-pre-proper;
+};
+
+&clk {
+	u-boot,dm-pre-proper;
+};
+
+&iomuxc {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio1 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio2 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio3 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio4 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio5 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio6 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_lsio_gpio7 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma_lpuart0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma_lpuart3 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch1 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_conn_sdch2 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio0 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio1 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio2 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio3 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio4 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio5 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio6 {
+	u-boot,dm-pre-proper;
+};
+
+&gpio7 {
+	u-boot,dm-pre-proper;
+};
+
+&lpuart3 {
+	u-boot,dm-pre-proper;
+};
+
+&usdhc1 {
+	u-boot,dm-pre-proper;
+};
+
+&usdhc2 {
+	u-boot,dm-pre-proper;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp-colibri.dts b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-colibri.dts
new file mode 100644
index 000000000..11ece34c0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-colibri.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/dts-v1/;
+
+#include "fsl-imx8qxp.dtsi"
+#include "fsl-imx8qxp-colibri-u-boot.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8X";
+	compatible = "toradex,colibri-imx8x", "fsl,imx8qxp";
+
+	chosen {
+		bootargs = "console=ttyLP3,115200 earlycon=lpuart32,0x5a090000,115200";
+		stdout-path = &lpuart3;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "usbh_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_hog2>;
+
+	colibri-imx8x {
+		pinctrl_lpuart0: lpuart0grp {
+			fsl,pins = <
+				SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
+				SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
+			>;
+		};
+
+		pinctrl_lpuart3: lpuart3grp {
+			fsl,pins = <
+				SC_P_FLEXCAN2_RX_ADMA_UART3_RX	0x06000020
+				SC_P_FLEXCAN2_TX_ADMA_UART3_TX	0x06000020
+			>;
+		};
+
+		pinctrl_lpuart3_ctrl: lpuart3ctrlgrp {
+			fsl,pins = <
+				SC_P_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x00000020 /* DTR */
+				SC_P_SAI1_RXD_LSIO_GPIO0_IO29		0x00000020 /* CTS */
+				SC_P_SAI1_RXC_LSIO_GPIO0_IO30		0x00000020 /* RTS */
+				SC_P_CSI_RESET_LSIO_GPIO3_IO03		0x00000020 /* DSR */
+				SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22	0x00000020 /* DCD */
+				SC_P_CSI_EN_LSIO_GPIO3_IO02		0x00000020 /* RI */
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD	0x000014a0 /* Use pads in 3.3V mode */
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD	0x000014a0 /* Use pads in 3.3V mode */
+				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000061
+				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT	0x06000061
+				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000061
+				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000061
+				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000061
+				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000061
+				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000061
+				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER	0x00000061
+			>;
+		};
+
+		pinctrl_gpio_bl_on: gpio-bl-on {
+			fsl,pins = <
+				SC_P_QSPI0A_DATA3_LSIO_GPIO3_IO12	0x00000040
+			>;
+		};
+
+		pinctrl_hog0: hog0grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD	0x000514a0 /* Use pads in 3.3V mode */
+			>;
+		};
+
+		pinctrl_hog1: hog1grp {
+			fsl,pins = <
+				SC_P_QSPI0A_DATA1_LSIO_GPIO3_IO10	0x00000020 /*  45 */
+				SC_P_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02	0x06000020 /*  65 */
+					SC_P_CSI_D07_CI_PI_D09		0x00000061
+				SC_P_QSPI0A_DATA2_LSIO_GPIO3_IO11	0x00000020 /*  69 */
+				SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13		0x00000020 /*  73 */
+				SC_P_SAI0_TXC_LSIO_GPIO0_IO26		0x00000020 /*  79 */
+					SC_P_CSI_D02_CI_PI_D04		0x00000061
+				SC_P_ENET0_RGMII_RXC_LSIO_GPIO5_IO03	0x06000020 /*  85 */
+					SC_P_CSI_D06_CI_PI_D08		0x00000061
+				SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17	0x00000020 /*  95 */
+				SC_P_SAI0_RXD_LSIO_GPIO0_IO27		0x00000020 /*  97 */
+					SC_P_CSI_D03_CI_PI_D05		0x00000061
+				SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18	0x00000020 /*  99 */
+				SC_P_SAI0_TXFS_LSIO_GPIO0_IO28		0x00000020 /* 101 */
+					SC_P_CSI_D00_CI_PI_D02		0x00000061
+				SC_P_SAI0_TXD_LSIO_GPIO0_IO25		0x00000020 /* 103 */
+					SC_P_CSI_D01_CI_PI_D03		0x00000061
+				SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19	0x00000020 /* 105 */
+				SC_P_QSPI0B_DATA2_LSIO_GPIO3_IO20	0x00000020 /* 107 */
+				SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05	0x00000020 /* 127 */
+				SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06	0x00000020 /* 131 */
+				SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04	0x00000020 /* 133 */
+				SC_P_CSI_PCLK_LSIO_GPIO3_IO00		0x00000020 /*  96 */
+				SC_P_QSPI0B_DATA3_LSIO_GPIO3_IO21	0x00000020 /*  98 */
+				SC_P_SAI1_RXFS_LSIO_GPIO0_IO31		0x00000020 /* 100 */
+				SC_P_QSPI0B_DQS_LSIO_GPIO3_IO22		0x00000020 /* 102 */
+				SC_P_QSPI0B_SS0_B_LSIO_GPIO3_IO23	0x00000020 /* 104 */
+				SC_P_QSPI0B_SS1_B_LSIO_GPIO3_IO24	0x00000020 /* 106 */
+			>;
+		};
+
+		pinctrl_hog2: hog2grp {
+			fsl,pins = <
+				SC_P_CSI_MCLK_LSIO_GPIO3_IO01		0x00000020 /*  75 */
+				SC_P_QSPI0A_SS0_B_LSIO_GPIO3_IO14	0x00000020 /*  77 */
+				SC_P_QSPI0A_SS1_B_LSIO_GPIO3_IO15	0x00000020 /*  89 */
+				SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16	0x00000020 /*  93 */
+			>;
+		};
+
+		/* Off Module I2C */
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				SC_P_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL	0x06000021
+				SC_P_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA	0x06000021
+			>;
+		};
+
+		/*INT*/
+		pinctrl_usb3503a: usb3503a-grp {
+			fsl,pins = <
+				SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x00000061
+			>;
+		};
+
+		pinctrl_usbc_det: usbc-det {
+			fsl,pins = <
+				SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09	0x06000040
+			>;
+		};
+
+		pinctrl_usbh1_reg: usbh1-reg {
+			fsl,pins = <
+				SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03	0x06000040
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+			fsl,pins = <
+				SC_P_QSPI0A_DATA0_LSIO_GPIO3_IO09	0x06000021
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+			>;
+		};
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&fec1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
new file mode 100644
index 000000000..701af4434
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&{/imx8qx-pm} {
+
+	u-boot,dm-spl;
+};
+
+&mu {
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pd_lsio {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio0 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio1 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio2 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio3 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio4 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio5 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio6 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio7 {
+	u-boot,dm-spl;
+};
+
+&pd_conn {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch0 {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch1 {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch2 {
+	u-boot,dm-spl;
+};
+
+&pd_dma {
+	u-boot,dm-spl;
+};
+
+&pd_dma_lpuart0 {
+	u-boot,dm-spl;
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&gpio6 {
+	u-boot,dm-spl;
+};
+
+&gpio7 {
+	u-boot,dm-spl;
+};
+
+&lpuart0 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+	mmc-hs400-1_8v;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp-mek.dts b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-mek.dts
new file mode 100644
index 000000000..4f35fbe31
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp-mek.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017-2018 NXP
+ */
+
+/dts-v1/;
+
+#include "fsl-imx8qxp.dtsi"
+#include "fsl-imx8qxp-mek-u-boot.dtsi"
+
+/ {
+	model = "Freescale i.MX8QXP MEK";
+	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
+
+	chosen {
+		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
+		stdout-path = &lpuart0;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay = <3480>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx8qxp-mek {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				SC_P_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x0600004c
+				SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD	0x000514a0
+			>;
+		};
+
+		pinctrl_ioexp_rst: ioexp-rst-grp {
+			fsl,pins = <
+				SC_P_SPI2_SDO_LSIO_GPIO1_IO01	0x06000021
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000048
+				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000048
+				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000048
+				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x06000048
+				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x06000048
+				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x06000048
+				SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x06000048
+				SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x06000048
+				SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x06000048
+				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000048
+				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x06000048
+				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x06000048
+				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x06000048
+				SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x06000048
+			>;
+		};
+
+		pinctrl_fec2: fec2grp {
+			fsl,pins = <
+				SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x06000048
+				SC_P_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x06000048
+				SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0	0x06000048
+				SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1	0x06000048
+				SC_P_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x06000048
+				SC_P_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x06000048
+				SC_P_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x06000048
+				SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x06000048
+				SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x06000048
+				SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1	0x06000048
+				SC_P_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2	0x06000048
+				SC_P_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x06000048
+			>;
+		};
+
+		pinctrl_lpi2c1: lpi2c1grp {
+			fsl,pins = <
+				SC_P_USB_SS3_TC1_ADMA_I2C1_SCL	0x06000021
+				SC_P_USB_SS3_TC3_ADMA_I2C1_SDA	0x06000021
+			>;
+		};
+
+		pinctrl_lpuart0: lpuart0grp {
+			fsl,pins = <
+				SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
+				SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+			>;
+		};
+
+		pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+			fsl,pins = <
+				SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000021
+				SC_P_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021
+				SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+			>;
+		};
+	};
+};
+
+&A35_0 {
+	u-boot,dm-pre-reloc;
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
+	status = "okay";
+
+	i2cswitch@71 {
+		compatible = "nxp,pca9646";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+
+		bb_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		mfi_i2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2cexp1_i2c1: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2cexp2_i2c1: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			pca9557_a: gpio@1a {
+				compatible = "nxp,pca9557";
+				reg = <0x1a>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+			pca9557_b: gpio@1d {
+				compatible = "nxp,pca9557";
+				reg = <0x1d>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,ar8031-phy-fixup;
+	fsl,magic-packet;
+	status = "okay";
+	phy-reset-gpios = <&pca9557_a 4 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <150>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-imx8qxp.dtsi b/roms/u-boot/arch/arm/dts/fsl-imx8qxp.dtsi
new file mode 100644
index 000000000..1bffff131
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-imx8qxp.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "fsl-imx8dxp.dtsi"
+
+/ {
+	model = "Freescale i.MX8QXP";
+	compatible = "fsl,imx8qxp";
+
+	cpus {
+		A35_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+		};
+
+		A35_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+		};
+	};
+
+	pmu {
+		interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, <&A35_3>;
+	};
+};
+
+&A35_2 {
+	device_type = "cpu";
+};
+
+&A35_3 {
+	device_type = "cpu";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a-2g5rdb.dts b/roms/u-boot/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
new file mode 100644
index 000000000..6402cf5ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NXP ls1012a 2G5RDB board device tree source
+ *
+ * Copyright 2017 NXP
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A 2G5RDB Board";
+
+	aliases {
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a-frdm.dts b/roms/u-boot/arch/arm/dts/fsl-ls1012a-frdm.dts
new file mode 100644
index 000000000..a7e30017f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a-frdm.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a-frdm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &duart0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a-frdm.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1012a-frdm.dtsi
new file mode 100644
index 000000000..88aa24a6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a-frdm.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor
+ */
+
+/include/ "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A FREEDOM Board";
+	aliases {
+		spi0 = &qspi;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a-frwy.dts b/roms/u-boot/arch/arm/dts/fsl-ls1012a-frwy.dts
new file mode 100644
index 000000000..7242af51e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a-frwy.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1012a FRWY board device tree source
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "FRWY-LS1012A Board";
+
+	aliases {
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: w25q16dw@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a-qds.dts b/roms/u-boot/arch/arm/dts/fsl-ls1012a-qds.dts
new file mode 100644
index 000000000..0b0149ba1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a-qds.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2016 Freescale Semiconductor
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a-qds.dtsi"
+
+/ {
+       chosen {
+               stdout-path = &duart0;
+       };
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a-qds.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1012a-qds.dtsi
new file mode 100644
index 000000000..910d2a5c7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a-qds.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2016 Freescale Semiconductor
+ */
+
+/include/ "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A QDS Board";
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi0;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "philips,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "at24,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "at24,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	phy_type = "ulpi";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a-rdb.dts b/roms/u-boot/arch/arm/dts/fsl-ls1012a-rdb.dts
new file mode 100644
index 000000000..8d0d559e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a-rdb.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a-rdb.dtsi"
+
+/ {
+       chosen {
+               stdout-path = &duart0;
+       };
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a-rdb.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1012a-rdb.dtsi
new file mode 100644
index 000000000..3757051b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a-rdb.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree Include file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor
+ */
+
+/include/ "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A RDB Board";
+	aliases {
+		spi0 = &qspi;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1012a.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1012a.dtsi
new file mode 100644
index 000000000..2894842cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1012a.dtsi
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2020 NXP
+ * Copyright 2016 Freescale Semiconductor
+ */
+
+/include/ "skeleton64.dtsi"
+
+/ {
+	compatible = "fsl,ls1012a";
+	interrupt-parent = <&gic>;
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1012a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dspi0: dspi@2100000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		esdhc0: esdhc@1560000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		esdhc1: esdhc@1580000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			big-endian;
+			non-removable;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		qspi: quadspi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x4000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			status = "disabled";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
+			       0x00 0x03480000 0x0 0x40000   /* lut registers */
+			       0x00 0x034c0000 0x0 0x40000   /* pf controls registers */
+			       0x40 0x00000000 0x0 0x20000>; /* configuration space */
+			reg-names = "dbi", "lut", "ctrl", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1012a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
+			       0x0 0x20140520 0x0 0x4>;	 /* ecc sata addr */
+			reg-names = "sata-base", "ecc-addr";
+			interrupts = <0 69 4>;
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		usb0: usb2@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <0 139 0x4>;
+			dr_mode = "host";
+			fsl,usb-erratum-a005697;
+		};
+
+		usb1: usb3@2f00000 {
+			compatible = "fsl,layerscape-dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 61 0x4>;
+			dr_mode = "host";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
new file mode 100644
index 000000000..b3861ed98
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <config.h>
+
+/ {
+	aliases {
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c3;
+		i2c2 = &i2c4;
+		rtc0 = &rtc;
+		ethernet2 = &enetc2;
+		ethernet3 = &enetc6;
+	};
+
+	binman: binman {
+		filename = "u-boot.rom";
+		pad-byte = <0xff>;
+
+		u-boot-spl {
+		};
+
+		fit {
+			offset = <CONFIG_SPL_PAD_TO>;
+			description = "FIT image with multiple configurations";
+
+			images {
+				uboot {
+					description = "U-Boot";
+					type = "firmware";
+					os = "u-boot";
+					arch = "arm";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					u-boot-nodtb {
+					};
+				};
+
+				fdt-1 {
+					description = "fsl-ls1028a-kontron-sl28";
+					type = "flat_dt";
+					arch = "arm";
+					compression = "none";
+
+					blob {
+						filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28.dtb";
+					};
+				};
+
+				fdt-2 {
+					description = "fsl-ls1028a-kontron-sl28-var1";
+					type = "flat_dt";
+					arch = "arm";
+					compression = "none";
+
+					blob {
+						filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dtb";
+					};
+				};
+
+				fdt-3 {
+					description = "fsl-ls1028a-kontron-sl28-var2";
+					type = "flat_dt";
+					arch = "arm";
+					compression = "none";
+
+					blob {
+						filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dtb";
+					};
+				};
+
+				fdt-4 {
+					description = "fsl-ls1028a-kontron-sl28-var3";
+					type = "flat_dt";
+					arch = "arm";
+					compression = "none";
+
+					blob {
+						filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dtb";
+					};
+				};
+
+				fdt-5 {
+					description = "fsl-ls1028a-kontron-sl28-var4";
+					type = "flat_dt";
+					arch = "arm";
+					compression = "none";
+
+					blob {
+						filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf-1";
+
+				conf-1 {
+					description = "fsl-ls1028a-kontron-sl28";
+					firmware = "uboot";
+					fdt = "fdt-1";
+				};
+
+				conf-2 {
+					description = "fsl-ls1028a-kontron-sl28-var1";
+					firmware = "uboot";
+					fdt = "fdt-2";
+				};
+
+				conf-3 {
+					description = "fsl-ls1028a-kontron-sl28-var2";
+					firmware = "uboot";
+					fdt = "fdt-3";
+				};
+
+				conf-4 {
+					description = "fsl-ls1028a-kontron-sl28-var3";
+					firmware = "uboot";
+					loadables = "uboot";
+					fdt = "fdt-4";
+				};
+
+				conf-5 {
+					description = "fsl-ls1028a-kontron-sl28-var4";
+					firmware = "uboot";
+					loadables = "uboot";
+					fdt = "fdt-5";
+				};
+			};
+		};
+	};
+};
+
+#ifdef CONFIG_SL28_ENABLE_SER0_CONSOLE
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
+#endif
+
+#ifdef CONFIG_SL28_SPL_LOADS_ATF_BL31
+&binman {
+	fit {
+		images {
+			bl31 {
+				description = "ARM Trusted Firmware (bl31)";
+				type = "firmware";
+				arch = "arm";
+				os = "arm-trusted-firmware";
+				compression = "none";
+				load = <CONFIG_SL28_BL31_ENTRY_ADDR>;
+				entry = <CONFIG_SL28_BL31_ENTRY_ADDR>;
+
+				blob-ext {
+					filename = "bl31.bin";
+				};
+			};
+		};
+
+		configurations {
+			conf-1 {
+				firmware = "bl31";
+				loadables = "uboot";
+			};
+
+			conf-2 {
+				firmware = "bl31";
+				loadables = "uboot";
+			};
+
+			conf-3 {
+				firmware = "bl31";
+				loadables = "uboot";
+			};
+
+			conf-4 {
+				firmware = "bl31";
+				loadables = "uboot";
+			};
+
+			conf-5 {
+				firmware = "bl31";
+				loadables = "uboot";
+			};
+		};
+	};
+};
+#endif
+
+#ifdef CONFIG_SL28_SPL_LOADS_OPTEE_BL32
+&binman {
+	fit {
+		images {
+			bl32 {
+				description = "OP-TEE Trusted OS (bl32)";
+				type = "firmware";
+				arch = "arm";
+				os = "tee";
+				compression = "none";
+				load = <CONFIG_SL28_BL32_ENTRY_ADDR>;
+				entry = <CONFIG_SL28_BL32_ENTRY_ADDR>;
+
+				blob-ext {
+					filename = "tee.bin";
+				};
+			};
+		};
+
+		configurations {
+			conf-1 {
+				loadables = "uboot", "bl32";
+			};
+
+			conf-2 {
+				loadables = "uboot", "bl32";
+			};
+
+			conf-3 {
+				loadables = "uboot", "bl32";
+			};
+
+			conf-4 {
+				loadables = "uboot", "bl32";
+			};
+
+			conf-5 {
+				loadables = "uboot", "bl32";
+			};
+		};
+	};
+};
+#endif
+
+&i2c0 {
+	rtc: rtc@32 {
+	};
+};
+
+&fspi {
+	u-boot,dm-pre-reloc;
+	flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&dspi2 {
+	u-boot,dm-pre-reloc;
+};
+
+&esdhc0 {
+	u-boot,dm-pre-reloc;
+};
+
+&esdhc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&lpuart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&serial0 {
+	u-boot,dm-pre-reloc;
+};
+
+&sysclk {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi
new file mode 100644
index 000000000..98e893936
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &enetc1;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts
new file mode 100644
index 000000000..33d85ed83
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 1 which has one ethernet port. It is
+ * different than the base variant, which also has one port, but here the
+ * port is connected via RGMII. This port is not TSN aware.
+ * None of the  four SerDes lanes are used by the module, instead they are
+ * all led out to the carrier for customer use.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (4 Lanes)";
+	compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc0 {
+	status = "disabled";
+	/delete-property/ phy-handle;
+};
+
+&enetc1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+/delete-node/ &phy0;
+&mdio0 {
+	phy0: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+
+		qca,clk-out-frequency = <125000000>;
+		qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+		qca,keep-pll-enabled;
+
+		vddio-supply = <&vddio>;
+
+		vddio: vddio-regulator {
+			regulator-name = "VDDIO";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vddh: vddh-regulator {
+			regulator-name = "VDDH";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi
new file mode 100644
index 000000000..79b771e07
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
new file mode 100644
index 000000000..1ea1265bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has no ethernet support in the
+ * bootloader.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (TSN-on-module)";
+	compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc0 {
+	status = "disabled";
+	/delete-property/ phy-handle;
+};
+
+/delete-node/ &phy0;
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi
new file mode 100644
index 000000000..879a76415
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &enetc0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts
new file mode 100644
index 000000000..0c8b2af41
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY)";
+	compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi
new file mode 100644
index 000000000..fce469468
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &enetc0;
+		ethernet1 = &enetc1;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts
new file mode 100644
index 000000000..b95e082b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 4 which has two ethernet ports. It
+ * extends the base and provides one more port connected via RGMII.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (Dual PHY)";
+	compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&mdio0 {
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+
+		qca,clk-out-frequency = <125000000>;
+		qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+		qca,keep-pll-enabled;
+
+		vddio-supply = <&vddio>;
+
+		vddio: vddio-regulator {
+			regulator-name = "VDDIO";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vddh: vddh-regulator {
+			regulator-name = "VDDH";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
new file mode 100644
index 000000000..ea77a83d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAL28";
+	compatible = "kontron,sl28", "fsl,ls1028a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &lpuart1;
+		spi0 = &fspi;
+		spi1 = &dspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&enetc0 {
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&enetc2 {
+	status = "disabled";
+};
+
+&enetc6 {
+	status = "disabled";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <133000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+
+		partition@0 {
+			reg = <0x000000 0x010000>;
+			label = "rcw";
+			read-only;
+		};
+
+		partition@10000 {
+			reg = <0x010000 0x0f0000>;
+			label = "failsafe bootloader";
+			read-only;
+		};
+
+		partition@100000 {
+			reg = <0x100000 0x040000>;
+			label = "failsafe DP firmware";
+			read-only;
+		};
+
+		partition@140000 {
+			reg = <0x140000 0x0a0000>;
+			label = "failsafe trusted firmware";
+			read-only;
+		};
+
+		partition@1e0000 {
+			reg = <0x1e0000 0x020000>;
+			label = "reserved";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x010000>;
+			label = "configuration store";
+		};
+
+		partition@210000 {
+			reg = <0x210000 0x0f0000>;
+			label = "bootloader";
+		};
+
+		partition@300000 {
+			reg = <0x300000 0x040000>;
+			label = "DP firmware";
+		};
+
+		partition@340000 {
+			reg = <0x340000 0x0a0000>;
+			label = "trusted firmware";
+		};
+
+		partition@3e0000 {
+			reg = <0x3e0000 0x020000>;
+			label = "bootloader environment";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&lpuart1 {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	phy0: ethernet-phy@5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
new file mode 100644
index 000000000..23816da8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 1xxx
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * This setup is using a SCH-30842 card with AQR112 PHY in slot 1 for ENETC
+ * port 0 USXGMII.
+ */
+&slot1 {
+	#include "fsl-sch-30842.dtsi"
+};
+
+&enetc0 {
+	status = "okay";
+	phy-mode = "usxgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
new file mode 100644
index 000000000..c6558ae2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 6xxx
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * This setup is using SCH-30842 cards with AQR112 PHY.
+ */
+&slot1 {
+	#include "fsl-sch-30842.dtsi"
+};
+
+&enetc0 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
new file mode 100644
index 000000000..fb1836a8a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 7777
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * This setup is using a SCH-30841 card with AQR412 10G quad PHY.
+ *
+ * Switch ports are mapped 1:1 to AQR412 card ports seated in slot 1.
+ * Bottom port is port 0.
+ * Note that this is only usable for:
+ *  - QDS boards WITHOUT lane B rework,
+ *  - AQR412 card WITHOUT lane A -> lane C rework
+ *
+ * The following DTS assumes DIP SW5[1-3] = 000b.
+ */
+&slot1 {
+#include "fsl-sch-30841.dtsi"
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>;
+};
+
+&mscc_felix_port1 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>;
+};
+
+&mscc_felix_port2 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
+};
+
+&mscc_felix_port3 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
new file mode 100644
index 000000000..1d02a3e11
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 7xx7
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+&slot1 {
+#include "fsl-sch-30841.dtsi"
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
+};
+
+&mscc_felix_port3 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
new file mode 100644
index 000000000..7d4702e4f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 8xxx
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * This setup is using SCH-24801 cards with VSC8234 quad SGMII PHY in slot 1.
+ */
+&slot1 {
+	#include "fsl-sch-24801.dtsi"
+};
+
+&enetc0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
new file mode 100644
index 000000000..c92dd1bd2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 9999
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * This setup is using SCH-24801 cards with VSC8234 quad SGMII PHY.
+ * LS1028A QDS boards with lane B rework require two cards for the 4 switch
+ * ports, QDS boards without the lane B rework only require one card.
+ *
+ * Switch ports are routed as follows:
+ * Port 0 goes to 1st port of VSC8234 quad card in slot 1,
+ * Port 1:
+ *   - if the QDS has had lane B rework, it is 1st port in slot 2,
+ *   - otherwise it is 2nd port in slot 1.
+ * Port 2:
+ *   - if DIP SW5[1] = 0 it is 3rd port in slot 1,
+ *   - otherwise it is 1st port in slot 3.
+ * Port 3:
+ *   - if DIP SW5[2-3] = 00b it is 4th port in slot 1,
+ *   - if DIP SW5[2-3] = 01b it is 2nd port in slot 3,
+ *   - if DIP SW5[2-3] = 11b it is 1st port in slot 4.
+ *
+ * The following DTS assumes QDS lane B rework and DIP SW5[1-3] = 000b.  Two
+ * SCH-24801 cards are required in slots 1 and 2.
+ */
+&slot1 {
+	#include "fsl-sch-24801.dtsi"
+};
+
+&slot2 {
+	#include "fsl-sch-24801.dtsi"
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
+};
+
+&mscc_felix_port1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>;
+};
+
+&mscc_felix_port2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
+};
+
+&mscc_felix_port3 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
new file mode 100644
index 000000000..941f7472e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 9999
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ *
+ */
+
+/*
+ * This set-up is using SCH-24801 cards with VSC8234 quad SGMII PHY.
+ *
+ * Switch ports are mapped 1:1 to VSC8234 card ports seated in slot 1.
+ * Top port is port 0.
+ *
+ * The following DTS assumes DIP SW5[1-3] = 000b.
+ */
+
+&slot1 {
+	#include "fsl-sch-24801.dtsi"
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
+};
+
+&mscc_felix_port1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>;
+};
+
+&mscc_felix_port2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
+};
+
+&mscc_felix_port3 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-duart.dts b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-duart.dts
new file mode 100644
index 000000000..83264e0f5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-duart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Freescale Layerscape-1028AQDS family SoC.
+ *
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-qds.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &serial0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-lpuart.dts b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-lpuart.dts
new file mode 100644
index 000000000..063857b2f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-lpuart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Freescale Layerscape-1028AQDS family SoC.
+ *
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-qds.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &lpuart0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
new file mode 100644
index 000000000..7e483e656
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW x3xx
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * This setup is using a SCH-30841-R card with AQR412 quad PHY in slot 2.  This
+ * is used for the 4 integrated ethernet switch in a multiplexes USXGMII set-up.
+ *
+ * We're including the normal .dsti file, not the reworked card .dtsi
+ * intentionally.  We are using multiplexing of the 4 interfaces on a single
+ * lane and the rework doesn't actually disable any port.  The rework is in fact
+ * needed, otherwise the PHY won't work with the default wiring on the QDS/PHY
+ * card.
+ */
+&slot2 {
+#include "fsl-sch-30841.dtsi"
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	status = "okay";
+	phy-mode = "usxgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>;
+};
+
+&mscc_felix_port1 {
+	status = "okay";
+	phy-mode = "usxgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>;
+};
+
+&mscc_felix_port2 {
+	status = "okay";
+	phy-mode = "usxgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
+};
+
+&mscc_felix_port3 {
+	status = "okay";
+	phy-mode = "usxgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
new file mode 100644
index 000000000..49fffdb9c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW x5xx
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * This setup is using SCH-28021 cards with VSC8514 QSGMII PHY in slot 2.
+ * This is only available on LS1028A QDS boards with lane B rework.
+ */
+&slot2 {
+	#include "fsl-sch-28021.dtsi"
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	status = "okay";
+	phy-mode = "qsgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>;
+};
+
+&mscc_felix_port1 {
+	status = "okay";
+	phy-mode = "qsgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>;
+};
+
+&mscc_felix_port2 {
+	status = "okay";
+	phy-mode = "qsgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>;
+};
+
+&mscc_felix_port3 {
+	status = "okay";
+	phy-mode = "qsgmii";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
new file mode 100644
index 000000000..8347462f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 7777
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+&slot2 {
+#include "fsl-sch-30842.dtsi"
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
new file mode 100644
index 000000000..6be3b5094
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1028A-QDS device tree fragment for RCW 7777
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+&slot3 {
+#include "fsl-sch-30842.dtsi"
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	status = "okay";
+	phy-mode = "sgmii-2500";
+	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds.dtsi
new file mode 100644
index 000000000..da89ff96e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1028AQDS device tree source
+ *
+ * Copyright 2019 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "NXP Layerscape 1028a QDS Board";
+	compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
+	aliases {
+		spi0 = &fspi;
+		spi1 = &dspi0;
+		spi2 = &dspi1;
+		spi3 = &dspi2;
+	};
+
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+
+	dflash1: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash2: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash3: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+
+	dflash4: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash5: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&dspi2 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash8: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	fpga@66 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-mfd";
+		reg = <0x66>;
+
+		mux-mdio@54 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mdio-mux-i2creg";
+			reg = <0x54>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf0>;
+			mdio-parent-bus = <&mdio0>;
+
+			/* on-board MDIO with a single RGMII PHY */
+			mdio@00 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x00>;
+
+				qds_phy0: phy@5 {
+					reg = <5>;
+				};
+			};
+			/* slot 1 */
+			slot1: mdio@40 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x40>;
+			};
+			/* slot 2 */
+			slot2: mdio@50 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x50>;
+			};
+			/* slot 3 */
+			slot3: mdio@60 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x60>;
+			};
+			/* slot 4 */
+			slot4: mdio@70 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+			};
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "pcf2127-rtc";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&enetc1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&qds_phy0>;
+};
+
+&mdio0 {
+	status = "okay";
+};
+
+#include "fsl-ls1028a-qds-8xxx-sch-24801.dtsi"
+#include "fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-rdb.dts b/roms/u-boot/arch/arm/dts/fsl-ls1028a-rdb.dts
new file mode 100644
index 000000000..82a8c0a0c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1028ARDB device tree source
+ *
+ * Copyright 2019 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "NXP Layerscape 1028a RDB Board";
+	compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
+	aliases {
+		spi0 = &fspi;
+		ethernet0 = &enetc0;
+		ethernet1 = &enetc2;
+		ethernet2 = &mscc_felix_port0;
+		ethernet3 = &mscc_felix_port1;
+		ethernet4 = &mscc_felix_port2;
+		ethernet5 = &mscc_felix_port3;
+	};
+};
+
+&dspi0 {
+	status = "okay";
+};
+
+&dspi1 {
+	status = "okay";
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+	mmc-hs200-1_8v;
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	 i2c-mux@77 {
+
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&enetc0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&rdb_phy0>;
+};
+
+&enetc2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	phy-handle = <&sw_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	phy-handle = <&sw_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	phy-handle = <&sw_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	phy-handle = <&sw_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	rdb_phy0: phy@2 {
+		reg = <2>;
+	};
+
+	/* VSC8514 QSGMII PHY */
+	sw_phy0: phy@10 {
+		reg = <0x10>;
+	};
+
+	sw_phy1: phy@11 {
+		reg = <0x11>;
+	};
+
+	sw_phy2: phy@12 {
+		reg = <0x12>;
+	};
+
+	sw_phy3: phy@13 {
+		reg = <0x13>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a.dtsi
new file mode 100644
index 000000000..c7c725a4f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a.dtsi
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1028a SOC common device tree source
+ *
+ * Copyright 2019-2020 NXP
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,ls1028a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	clockgen: clocking@1300000 {
+		compatible = "fsl,ls1028a-clockgen";
+		reg = <0x0 0x1300000 0x0 0xa0000>;
+		#clock-cells = <2>;
+		clocks = <&sysclk>;
+	};
+
+	memory@01080000 {
+		device_type = "memory";
+		reg = <0x00000000 0x01080000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			  <0x0 0x06040000 0 0x40000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+					 IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	gic_lpi_base: syscon@0x80000000 {
+		compatible = "gic-lpi-base";
+		reg = <0x0 0x80000000 0x0 0x100000>;
+		max-gic-redistributors = <2>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fspi: flexspi@20c0000 {
+		compatible = "nxp,lx2160a-fspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x20c0000 0x0 0x10000>,
+		      <0x0 0x20000000 0x0 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+		clock-names = "fspi_en", "fspi";
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial0: serial@21c0500 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0500 0x0 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial1: serial@21c0600 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0600 0x0 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pcie1: pcie@3400000 {
+	       compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
+	       reg = <0x00 0x03400000 0x0 0x80000
+		       0x00 0x03480000 0x0 0x40000   /* lut registers */
+		       0x00 0x034c0000 0x0 0x40000  /* pf controls registers */
+		       0x80 0x00000000 0x0 0x20000>; /* configuration space */
+	       reg-names = "dbi", "lut", "ctrl", "config";
+	       #address-cells = <3>;
+	       #size-cells = <2>;
+	       device_type = "pci";
+	       num-lanes = <4>;
+	       bus-range = <0x0 0xff>;
+	       ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000   /* downstream I/O */
+		       0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie2: pcie@3500000 {
+	       compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
+	       reg = <0x00 0x03500000 0x0 0x80000
+		       0x00 0x03580000 0x0 0x40000   /* lut registers */
+		       0x00 0x035c0000 0x0 0x40000  /* pf controls registers */
+		       0x88 0x00000000 0x0 0x20000>; /* configuration space */
+	       reg-names = "dbi", "lut", "ctrl", "config";
+	       #address-cells = <3>;
+	       #size-cells = <2>;
+	       device_type = "pci";
+	       num-lanes = <4>;
+	       bus-range = <0x0 0xff>;
+	       ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000   /* downstream I/O */
+		       0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie@1f0000000 {
+		compatible = "pci-host-ecam-generic";
+		/* ECAM bus 0, HW has more space reserved but not populated */
+		bus-range = <0x0 0x0>;
+		reg = <0x01 0xf0000000 0x0 0x100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
+		enetc0: pci@0,0 {
+			reg = <0x000000 0 0 0 0>;
+			status = "disabled";
+		};
+		enetc1: pci@0,1 {
+			reg = <0x000100 0 0 0 0>;
+			status = "disabled";
+		};
+		enetc2: pci@0,2 {
+			reg = <0x000200 0 0 0 0>;
+			status = "okay";
+			phy-mode = "internal";
+		};
+		mdio0: pci@0,3 {
+			#address-cells=<0>;
+			#size-cells=<1>;
+			reg = <0x000300 0 0 0 0>;
+			status = "disabled";
+		};
+
+		mscc_felix: pci@0,5 {
+			reg = <0x000500 0 0 0 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mscc_felix_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				mscc_felix_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				mscc_felix_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				mscc_felix_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				mscc_felix_port4: port@4 {
+					reg = <4>;
+					phy-mode = "internal";
+					status = "disabled";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+					};
+				};
+
+				mscc_felix_port5: port@5 {
+					reg = <5>;
+					phy-mode = "internal";
+					status = "disabled";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+
+				};
+			};
+		};
+
+		enetc6: pci@0,6 {
+			reg = <0x000600 0 0 0 0>;
+			status = "disabled";
+			phy-mode = "internal";
+		};
+	};
+
+	i2c0: i2c@2000000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@2010000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2020000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@2030000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@2040000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2040000 0x0 0x10000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@2050000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2050000 0x0 0x10000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@2060000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2060000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@2070000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2070000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	lpuart0: serial@2260000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2260000 0x0 0x1000>;
+		interrupts = <0 232 0x4>;
+		clocks = <&sysclk>;
+		clock-names = "ipg";
+		little-endian;
+		status = "disabled";
+	};
+
+	lpuart1: serial@2270000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2270000 0x0 0x1000>;
+		interrupts = <0 233 0x4>;
+		clocks = <&sysclk>;
+		clock-names = "ipg";
+		little-endian;
+		status = "disabled";
+	};
+
+	lpuart2: serial@2280000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2280000 0x0 0x1000>;
+		interrupts = <0 234 0x4>;
+		clocks = <&sysclk>;
+		clock-names = "ipg";
+		little-endian;
+		status = "disabled";
+	};
+
+	lpuart3: serial@2290000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2290000 0x0 0x1000>;
+		interrupts = <0 235 0x4>;
+		clocks = <&sysclk>;
+		clock-names = "ipg";
+		little-endian;
+		status = "disabled";
+	};
+
+	lpuart4: serial@22a0000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x22a0000 0x0 0x1000>;
+		interrupts = <0 236 0x4>;
+		clocks = <&sysclk>;
+		clock-names = "ipg";
+		little-endian;
+		status = "disabled";
+	};
+
+	lpuart5: serial@22b0000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x22b0000 0x0 0x1000>;
+		interrupts = <0 237 0x4>;
+		clocks = <&sysclk>;
+		clock-names = "ipg";
+		little-endian;
+		status = "disabled";
+	};
+
+	usb1: usb3@3100000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3100000 0x0 0x10000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "host";
+		status = "disabled";
+	};
+
+	usb2: usb3@3110000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3110000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "host";
+		status = "disabled";
+	};
+
+	dspi0: dspi@2100000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2100000 0x0 0x10000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "dspi";
+		clocks = <&clockgen 4 0>;
+		num-cs = <5>;
+		litte-endian;
+		status = "disabled";
+	};
+
+	dspi1: dspi@2110000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2110000 0x0 0x10000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "dspi";
+		clocks = <&clockgen 4 0>;
+		num-cs = <5>;
+		little-endian;
+		status = "disabled";
+	};
+
+	dspi2: dspi@2120000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2120000 0x0 0x10000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "dspi";
+		clocks = <&clockgen 4 0>;
+		num-cs = <5>;
+		little-endian;
+		status = "disabled";
+	};
+
+	esdhc0: esdhc@2140000 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2140000 0x0 0x10000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		big-endian;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	esdhc1: esdhc@2150000 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2150000 0x0 0x10000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		big-endian;
+		non-removable;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	gpio0: gpio@2300000 {
+		compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+		reg = <0x0 0x2300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		little-endian;
+	};
+
+	gpio1: gpio@2310000 {
+		compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+		reg = <0x0 0x2310000 0x0 0x10000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		little-endian;
+	};
+
+	gpio2: gpio@2320000 {
+		compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		little-endian;
+	};
+
+	sata: sata@3200000 {
+		compatible = "fsl,ls1028a-ahci";
+		reg = <0x0 0x3200000 0x0 0x10000	/* ccsr sata base */
+		       0x7 0x100520  0x0 0x4>;		/* ecc sata addr*/
+		reg-names = "sata-base", "ecc-addr";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	cluster1_core0_watchdog: wdt@c000000 {
+		compatible = "arm,sp805-wdt";
+		reg = <0x0 0xc000000 0x0 0x1000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1043-post.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1043-post.dtsi
new file mode 100644
index 000000000..e4eab9e5c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1043-post.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+	fsl,erratum-a050385;
+
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+	};
+
+	enet5: ethernet@ea000 {
+	};
+
+	enet6: ethernet@f0000 {
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds-duart.dts b/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds-duart.dts
new file mode 100644
index 000000000..f2a9a1d2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds-duart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a-qds.dtsi"
+
+/ {
+       chosen {
+               stdout-path = &duart0;
+       };
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds-lpuart.dts b/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds-lpuart.dts
new file mode 100644
index 000000000..a9fc93193
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds-lpuart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a-qds.dtsi"
+
+/ {
+       chosen {
+               stdout-path = &lpuart0;
+       };
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds.dtsi
new file mode 100644
index 000000000..884bdad19
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1043a-qds.dtsi
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A QDS Board";
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi0;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <1000000>; /* input clock */
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fl128s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "philips,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "at24,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "at24,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0x2 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1043a-rdb.dts b/roms/u-boot/arch/arm/dts/fsl-ls1043a-rdb.dts
new file mode 100644
index 000000000..6e4ea5b40
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1043a-rdb.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ * Copyright 2020 NXP
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+
+        aliases {
+		spi1 = &dspi0;
+        };
+
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: n25q12a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+	adt7461a@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+	eeprom@52 {
+		compatible = "at24,24c512";
+		reg = <0x52>;
+	};
+
+	eeprom@53 {
+		compatible = "at24,24c512";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+		status = "okay";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+		status = "okay";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-txid";
+		status = "okay";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-txid";
+		status = "okay";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+		status = "okay";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+		status = "okay";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr105_phy>;
+		phy-connection-type = "xgmii";
+		status = "okay";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		qsgmii_phy1: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+
+		qsgmii_phy2: ethernet-phy@5 {
+			reg = <0x5>;
+		};
+
+		qsgmii_phy3: ethernet-phy@6 {
+			reg = <0x6>;
+		};
+
+		qsgmii_phy4: ethernet-phy@7 {
+			reg = <0x7>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr105_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 132 4>;
+			reg = <0x1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1043a.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1043a.dtsi
new file mode 100644
index 000000000..d8171bd03
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1043a.dtsi
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree Include file for NXP Layerscape-1043A family SoC.
+ *
+ * Copyright 2020 NXP
+ * Copyright (C) 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/include/ "skeleton64.dtsi"
+
+/ {
+	compatible = "fsl,ls1043a";
+	interrupt-parent = <&gic>;
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1043a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dspi0: dspi@2100000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: dspi@2110000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 134 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <0 43 0x4>;
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <0 48 0x4>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <0 49 0x4>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <0 50 0x4>;
+			clock-names = "ipg";
+			clocks = <&sysclk>;
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <0 51 0x4>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+		qspi: quadspi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x1000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			status = "disabled";
+		};
+
+		usb0: usb3@2f00000 {
+			compatible = "fsl,layerscape-dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+		};
+
+		usb1: usb3@3000000 {
+			compatible = "fsl,layerscape-dwc3";
+			reg = <0x0 0x3000000 0x0 0x10000>;
+			interrupts = <0 61 0x4>;
+			dr_mode = "host";
+		};
+
+		usb2: usb3@3100000 {
+			compatible = "fsl,layerscape-dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 63 0x4>;
+			dr_mode = "host";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x10000   /* dbi registers */
+			       0x00 0x03410000 0x0 0x10000   /* lut registers */
+			       0x40 0x00000000 0x0 0x20000>; /* configuration space */
+			reg-names = "dbi", "lut", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x10000   /* dbi registers */
+			       0x00 0x03510000 0x0 0x10000   /* lut registers */
+			       0x48 0x00000000 0x0 0x20000>; /* configuration space */
+			reg-names = "dbi", "lut", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x10000   /* dbi registers */
+			       0x00 0x03610000 0x0 0x10000   /* lut registers */
+			       0x50 0x00000000 0x0 0x20000>; /* configuration space */
+			reg-names = "dbi", "lut", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1043a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
+			       0x0 0x20140520 0x0 0x4>;  /* ecc sata addr*/
+			reg-names = "sata-base", "ecc-addr";
+			interrupts = <0 69 4>;
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1046-post.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1046-post.dtsi
new file mode 100644
index 000000000..2dac6a05f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1046-post.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree nodes for ls1046
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+#include "qoriq-fman3-0-10g-1.dtsi"
+};
+
+&fman0 {
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+	};
+
+	enet5: ethernet@ea000 {
+	};
+
+	enet6: ethernet@f0000 {
+	};
+
+	enet7: ethernet@f2000 {
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1046a-frwy.dts b/roms/u-boot/arch/arm/dts/fsl-ls1046a-frwy.dts
new file mode 100644
index 000000000..cda05411d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1046a-frwy.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree Include file for NXP Layerscape-1046A family SoC.
+ *
+ * Copyright 2019 NXP
+ *
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A FRWY Board";
+
+	aliases {
+		spi0 = &qspi;
+	};
+
+};
+
+&qspi {
+	status = "okay";
+
+	mt25qu512a0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds-duart.dts b/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds-duart.dts
new file mode 100644
index 000000000..94f0c674f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds-duart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ */
+
+/dts-v1/;
+#include "fsl-ls1046a-qds.dtsi"
+
+/ {
+       chosen {
+               stdout-path = &duart0;
+       };
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds-lpuart.dts b/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds-lpuart.dts
new file mode 100644
index 000000000..607ecc676
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds-lpuart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ */
+
+/dts-v1/;
+#include "fsl-ls1046a-qds.dtsi"
+
+/ {
+       chosen {
+               stdout-path = &lpuart0;
+       };
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds.dtsi
new file mode 100644
index 000000000..fec5c8ddb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1046a-qds.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@nxp.com>
+ */
+
+/include/ "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A QDS Board";
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi0;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <1000000>; /* input clock */
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1046a-rdb.dts b/roms/u-boot/arch/arm/dts/fsl-ls1046a-rdb.dts
new file mode 100644
index 000000000..464129291
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor
+ * Copyright 2020 NXP
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A RDB Board";
+
+	aliases {
+		spi0 = &qspi;
+	};
+
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	 };
+};
+
+&sata {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-id";
+		status = "okay";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-id";
+		status = "okay";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy1>;
+		phy-connection-type = "sgmii";
+		status = "okay";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy2>;
+		phy-connection-type = "sgmii";
+		status = "okay";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr106_phy>;
+		phy-connection-type = "xgmii";
+		status = "okay";
+	};
+
+	ethernet@f2000 { /* 10GEC2 */
+		fixed-link = <0 1 1000 0 0>;
+		phy-connection-type = "xgmii";
+		status = "okay";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		sgmii_phy1: ethernet-phy@3 {
+			reg = <0x3>;
+		};
+
+		sgmii_phy2: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr106_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 131 4>;
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1046a.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1046a.dtsi
new file mode 100644
index 000000000..9df419a87
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1046a.dtsi
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ */
+
+/include/ "skeleton64.dtsi"
+
+/ {
+	compatible = "fsl,ls1046a";
+	interrupt-parent = <&gic>;
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
+		      <0x0 0x1420000 0 0x10000>, /* GICC */
+		      <0x0 0x1440000 0 0x20000>, /* GICH */
+		      <0x0 0x1460000 0 0x20000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1046a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dspi0: dspi@2100000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: dspi@2110000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 68 4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 134 4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <0 43 0x4>;
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <0 48 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <0 49 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <0 50 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <0 51 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		qspi: quadspi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			status = "disabled";
+		};
+
+		usb0: usb@2f00000 {
+			compatible = "fsl,layerscape-dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 4>;
+			dr_mode = "host";
+		};
+
+		usb1: usb@3000000 {
+			compatible = "fsl,layerscape-dwc3";
+			reg = <0x0 0x3000000 0x0 0x10000>;
+			interrupts = <0 61 4>;
+			dr_mode = "host";
+		};
+
+		usb2: usb@3100000 {
+			compatible = "fsl,layerscape-dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 63 4>;
+			dr_mode = "host";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
+			       0x00 0x03480000 0x0 0x40000   /* lut registers */
+			       0x00 0x034c0000 0x0 0x40000   /* pf controls registers */
+			       0x40 0x00000000 0x0 0x20000>; /* configuration space */
+			reg-names = "dbi", "lut", "ctrl", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		};
+
+		pcie_ep1: pcie_ep@3400000 {
+			compatible = "fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x80000
+			       0x00 0x034c0000 0x0 0x40000
+			       0x40 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "ctrl", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
+			       0x00 0x03580000 0x0 0x40000   /* lut registers */
+			       0x00 0x035c0000 0x0 0x40000   /* pf controls registers */
+			       0x48 0x00000000 0x0 0x20000>; /* configuration space */
+			reg-names = "dbi", "lut", "ctrl", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		};
+
+		pcie_ep2: pcie_ep@3500000 {
+			compatible = "fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x80000
+			       0x00 0x035c0000 0x0 0x40000
+			       0x48 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "ctrl", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
+			       0x00 0x03680000 0x0 0x40000   /* lut registers */
+			       0x00 0x036c0000 0x0 0x40000   /* pf controls registers */
+			       0x50 0x00000000 0x0 0x20000>; /* configuration space */
+			reg-names = "dbi", "lut", "ctrl", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		};
+
+		pcie_ep3: pcie_ep@3600000 {
+			compatible = "fsl,ls-pcie-ep";
+			reg = <0x00 0x03600000 0x0 0x80000
+			       0x00 0x036c0000 0x0 0x40000
+			       0x50 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "ctrl", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1046a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
+			       0x0 0x20140520 0x0 0x4>;	 /* ecc sata addr*/
+			reg-names = "sata-base", "ecc-addr";
+			interrupts = <0 69 4>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-21-x.dts b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-21-x.dts
new file mode 100644
index 000000000..a87796451
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-21-x.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1088AQDS device tree source for SERDES protocol 21.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a-qds-sd1-21.dtsi"
+
+/ {
+	model = "NXP Layerscape 1088a QDS Board (DTS 21-x)";
+	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-29-x.dts b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-29-x.dts
new file mode 100644
index 000000000..29c4ec59f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-29-x.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1088AQDS device tree source for SERDES protocol 29.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a-qds-sd1-29.dtsi"
+
+/ {
+	model = "NXP Layerscape 1088a QDS Board (DTS 29-x)";
+	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-sd1-21.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-sd1-21.dtsi
new file mode 100644
index 000000000..e0a6c0483
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-sd1-21.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1088AQDS device tree source for SERDES block #1 - protocol 21 (0x15)
+ *
+ * Copyright 2020 NXP
+ */
+
+#include "fsl-ls1088a-qds.dtsi"
+
+&dpmac1 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac2 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-sd1-29.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-sd1-29.dtsi
new file mode 100644
index 000000000..65e95300a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds-sd1-29.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS1088AQDS device tree source for SERDES block #1 - protocol 29 (0x1d)
+ *
+ * Copyright 2020 NXP
+ */
+
+#include "fsl-ls1088a-qds.dtsi"
+
+&dpmac1 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac2 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds.dts b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds.dts
new file mode 100644
index 000000000..8e64e713a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1088a QDS default board device tree source
+ *
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a-qds.dtsi"
+
+/ {
+	model = "NXP Layerscape 1088a QDS Board";
+	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds.dtsi
new file mode 100644
index 000000000..a7d0edcf0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1088a-qds.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1088a QDS common board device tree source
+ *
+ * Copyright 2017-2020 NXP
+ */
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	fpga@66 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-mfd";
+		reg = <0x66>;
+
+		mux-mdio@54 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mdio-mux-i2creg";
+			reg = <0x54>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xe0>; // reg 0x54, bits 7:5
+			mdio-parent-bus = <&emdio1>;
+
+			mdio@00 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x00>;
+
+				rgmii_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+			mdio@20 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x20>;
+
+				rgmii_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+			};
+
+			emdio1_slot1: mdio@40 { /* I/O Slot #1 */
+				reg = <0x40>;
+				device-name = "emdio1_slot1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot3: mdio@60 { /* I/O Slot #3 */
+				reg = <0x60>;
+				device-name = "emdio1_slot3";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0 0 0x5 0x80000000 0x08000000
+			2 0 0x5 0x30000000 0x00010000
+			3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus", "fsl,ls1088aqds-fpga",
+				"fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	 };
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1088a-rdb.dts b/roms/u-boot/arch/arm/dts/fsl-ls1088a-rdb.dts
new file mode 100644
index 000000000..de92bf22e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1088a-rdb.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1088a RDB board device tree source
+ *
+ * Copyright 2017 NXP
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "NXP Layerscape 1088a RDB Board";
+	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+	aliases {
+		spi0 = &qspi;
+	};
+};
+
+&dpmac1 {
+	status = "okay";
+	phy-connection-type = "xgmii";
+};
+
+&dpmac2 {
+	status = "okay";
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "xgmii";
+};
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&mdio1_phy5>;
+	phy-connection-type = "qsgmii";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&mdio1_phy6>;
+	phy-connection-type = "qsgmii";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&mdio1_phy7>;
+	phy-connection-type = "qsgmii";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&mdio1_phy8>;
+	phy-connection-type = "qsgmii";
+};
+
+&dpmac7 {
+	status = "okay";
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "qsgmii";
+};
+
+&dpmac8 {
+	status = "okay";
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "qsgmii";
+};
+
+&dpmac9 {
+	status = "okay";
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "qsgmii";
+};
+
+&dpmac10 {
+	status = "okay";
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "qsgmii";
+};
+
+&emdio1 {
+	status = "okay";
+
+	/* Freescale F104 PHY1 */
+	mdio1_phy1: emdio1_phy@1 {
+		reg = <0x1c>;
+		};
+	mdio1_phy2: emdio1_phy@2 {
+		reg = <0x1d>;
+		};
+	mdio1_phy3: emdio1_phy@3 {
+		reg = <0x1e>;
+		};
+	mdio1_phy4: emdio1_phy@4 {
+		reg = <0x1f>;
+	};
+
+	/* F104 PHY2 */
+	mdio1_phy5: emdio1_phy@5 {
+		reg = <0x0c>;
+	};
+	mdio1_phy6: emdio1_phy@6 {
+		reg = <0x0d>;
+	};
+	mdio1_phy7: emdio1_phy@7 {
+		reg = <0x0e>;
+	};
+	mdio1_phy8: emdio1_phy@8 {
+		reg = <0x0f>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	/* Aquantia AQR105 10G PHY */
+	mdio2_phy1: emdio2_phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 2 0x4>;
+		reg = <0x0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	 };
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1088a.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1088a.dtsi
new file mode 100644
index 000000000..64caa600a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls1088a.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1088a SOC common device tree source
+ *
+ * Copyright 2017, 2020-2021 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	compatible = "fsl,ls1088a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	gic_lpi_base: syscon@0x80000000 {
+		compatible = "gic-lpi-base";
+		reg = <0x0 0x80000000 0x0 0x100000>;
+		max-gic-redistributors = <8>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	i2c0: i2c@2000000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+	};
+
+	i2c1: i2c@2010000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+	};
+
+	i2c2: i2c@2020000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+	};
+
+	i2c3: i2c@2030000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+	};
+
+	serial0: serial@21c0500 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0500 0x0 0x100>;
+		clock-frequency = <0>;	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	serial1: serial@21c0600 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0600 0x0 0x100>;
+		clock-frequency = <0>; 	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	dspi: dspi@2100000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2100000 0x0 0x10000>;
+		interrupts = <0 26 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	qspi: quadspi@1550000 {
+		compatible = "fsl,ls1088a-qspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x20c0000 0x0 0x10000>,
+			<0x0 0x20000000 0x0 0x10000000>;
+		reg-names = "QuadSPI", "QuadSPI-memory";
+		num-cs = <4>;
+	};
+
+	esdhc: esdhc@2140000 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2140000 0x0 0x10000>;
+		interrupts = <0 28 0x4>; /* Level high type */
+		little-endian;
+		bus-width = <4>;
+	};
+
+	gpio0: gpio@2300000 {
+		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@2310000 {
+		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2310000 0x0 0x10000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@2320000 {
+		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@2330000 {
+		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ifc: ifc@1530000 {
+		compatible = "fsl,ifc", "simple-bus";
+		reg = <0x0 0x2240000 0x0 0x20000>;
+		interrupts = <0 21 0x4>; /* Level high type */
+	};
+
+	usb0: usb3@3100000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3100000 0x0 0x10000>;
+		interrupts = <0 80 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
+	usb1: usb3@3110000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3110000 0x0 0x10000>;
+		interrupts = <0 81 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
+	pcie1: pcie@3400000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03480000 0x0 0x80000   /* lut registers */
+		       0x00 0x034c0000 0x0 0x40000   /* pf controls registers */
+		       0x20 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x20 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie2: pcie@3500000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03580000 0x0 0x80000   /* lut registers */
+		       0x00 0x035c0000 0x0 0x40000   /* pf controls registers */
+		       0x28 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x28 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie3: pcie@3600000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03680000 0x0 0x80000   /* lut registers */
+		       0x00 0x036c0000 0x0 0x40000   /* pf controls registers */
+		       0x30 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <8>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	sata: sata@3200000 {
+		compatible = "fsl,ls1088a-ahci";
+		reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
+		       0x7 0x100520  0x0 0x4>;	 /* ecc sata addr*/
+		reg-names = "sata-base", "ecc-addr";
+		interrupts = <0 133 4>;
+		status = "disabled";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc", "simple-mfd";
+		reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+		#address-cells = <3>;
+		#size-cells = <1>;
+
+		/*
+		 * Region type 0x0 - MC portals
+		 * Region type 0x1 - QBMAN portals
+		 */
+		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+			  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+		dpmacs {
+			compatible = "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dpmac1: dpmac@1 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x1>;
+				status = "disabled";
+			};
+
+			dpmac2: dpmac@2 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x2>;
+				status = "disabled";
+			};
+
+			dpmac3: dpmac@3 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x3>;
+				status = "disabled";
+			};
+
+			dpmac4: dpmac@4 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x4>;
+				status = "disabled";
+			};
+
+			dpmac5: dpmac@5 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x5>;
+				status = "disabled";
+			};
+
+			dpmac6: dpmac@6 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x6>;
+				status = "disabled";
+			};
+
+			dpmac7: dpmac@7 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x7>;
+				status = "disabled";
+			};
+
+			dpmac8: dpmac@8 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x8>;
+				status = "disabled";
+			};
+
+			dpmac9: dpmac@9 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x9>;
+				status = "disabled";
+			};
+
+			dpmac10: dpmac@a {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xa>;
+				status = "disabled";
+			};
+		};
+	};
+
+	emdio1: mdio@8B96000 {
+		compatible = "fsl,ls-mdio";
+		reg = <0x0 0x8B96000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	emdio2: mdio@8B97000 {
+		compatible = "fsl,ls-mdio";
+		reg = <0x0 0x8B97000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds-42-x.dts b/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds-42-x.dts
new file mode 100644
index 000000000..bd46c395d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds-42-x.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS2080AQDS device tree source for SERDES protocol 42.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a-qds-sd1-42.dtsi"
+
+/ {
+	model = "NXP Layerscape LS2080AQDS Board (DTS 42-x)";
+	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds-sd1-42.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds-sd1-42.dtsi
new file mode 100644
index 000000000..ccbb5de1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds-sd1-42.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS2080aQDS device tree source for SERDES block #1 - protocol 42 (0x2a)
+ *
+ * Copyright 2020 NXP
+ */
+
+#include "fsl-ls2080a-qds.dtsi"
+
+&dpmac1 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac2 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac3 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac7 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
+
+&dpmac8 {
+	status = "okay";
+	phy-connection-type = "xfi";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds.dts b/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds.dts
new file mode 100644
index 000000000..a1196f929
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Freescale ls2080a QDS defaul board device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a-qds.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a QDS Board";
+	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds.dtsi
new file mode 100644
index 000000000..cb7851f2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls2080a-qds.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Freescale ls2080a QDS common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
+ */
+
+#include "fsl-ls2080a.dtsi"
+
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs256s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls2080a-rdb.dts b/roms/u-boot/arch/arm/dts/fsl-ls2080a-rdb.dts
new file mode 100644
index 000000000..0a87caeba
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls2080a-rdb.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Freescale ls2080a RDB board device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a RDB Board";
+	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+	aliases {
+		spi1 = &dspi;
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q512a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls2080a.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls2080a.dtsi
new file mode 100644
index 000000000..7374d580e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls2080a.dtsi
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls2080a SOC common device tree source
+ *
+ * Copyright 2020-2021 NXP
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/ {
+	compatible = "fsl,ls2080a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	gic_lpi_base: syscon@0x80000000 {
+		compatible = "gic-lpi-base";
+		reg = <0x0 0x80000000 0x0 0x100000>;
+		max-gic-redistributors = <8>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	serial0: serial@21c0500 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0500 0x0 0x100>;
+		clock-frequency = <0>;	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	serial1: serial@21c0600 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0600 0x0 0x100>;
+		clock-frequency = <0>; 	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	i2c0: i2c@2000000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 0x4>; /* Level high type */
+	};
+
+	i2c1: i2c@2010000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 0x4>; /* Level high type */
+	};
+
+	i2c2: i2c@2020000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 0x4>; /* Level high type */
+	};
+
+	i2c3: i2c@2030000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 0x4>; /* Level high type */
+	};
+
+	dspi: dspi@2100000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2100000 0x0 0x10000>;
+		interrupts = <0 26 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	qspi: quadspi@1550000 {
+		compatible = "fsl,ls2080a-qspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x20c0000 0x0 0x10000>,
+			<0x0 0x20000000 0x0 0x10000000>;
+		reg-names = "QuadSPI", "QuadSPI-memory";
+		status = "disabled";
+	};
+
+	esdhc: esdhc@0 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2140000 0x0 0x10000>;
+		interrupts = <0 28 0x4>; /* Level high type */
+		little-endian;
+		bus-width = <4>;
+	};
+
+	gpio0: gpio@2300000 {
+		compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2300000 0x0 0x10000>;
+		interrupts = <0 36 0x4>; /* Level high type */
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@2310000 {
+		compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2310000 0x0 0x10000>;
+		interrupts = <0 36 0x4>; /* Level high type */
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@2320000 {
+		compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <0 37 0x4>; /* Level high type */
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@2330000 {
+		compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+		reg = <0x0 0x2330000 0x0 0x10000>;
+		interrupts = <0 37 0x4>; /* Level high type */
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	usb0: usb3@3100000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3100000 0x0 0x10000>;
+		interrupts = <0 80 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
+	usb1: usb3@3110000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3110000 0x0 0x10000>;
+		interrupts = <0 81 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
+	pcie1: pcie@3400000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03480000 0x0 0x80000   /* lut registers */
+		       0x10 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x10 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie2: pcie@3500000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03580000 0x0 0x80000   /* lut registers */
+		       0x12 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x12 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie3: pcie@3600000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03680000 0x0 0x80000   /* lut registers */
+		       0x14 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <8>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x14 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie4: pcie@3700000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03700000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03780000 0x0 0x80000   /* lut registers */
+		       0x16 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x16 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	sata: sata@3200000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 0x4>; /* Level high type */
+			status = "disabled";
+	};
+
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc", "simple-mfd";
+		reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+		#address-cells = <3>;
+		#size-cells = <1>;
+
+		/*
+		 * Region type 0x0 - MC portals
+		 * Region type 0x1 - QBMAN portals
+		 */
+		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+			0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+		dpmacs {
+			compatible = "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dpmac1: dpmac@1 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x1>;
+				status = "disabled";
+			};
+
+			dpmac2: dpmac@2 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x2>;
+				status = "disabled";
+			};
+
+			dpmac3: dpmac@3 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x3>;
+				status = "disabled";
+			};
+
+			dpmac4: dpmac@4 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x4>;
+				status = "disabled";
+			};
+
+			dpmac5: dpmac@5 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x5>;
+				status = "disabled";
+			};
+
+			dpmac6: dpmac@6 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x6>;
+				status = "disabled";
+			};
+
+			dpmac7: dpmac@7 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x7>;
+				status = "disabled";
+			};
+
+			dpmac8: dpmac@8 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x8>;
+				status = "disabled";
+			};
+		};
+	};
+
+	emdio1: mdio@8B96000 {
+		compatible = "fsl,ls-mdio";
+		reg = <0x0 0x8B96000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	emdio2: mdio@8B97000 {
+		compatible = "fsl,ls-mdio";
+		reg = <0x0 0x8B97000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls2081a-rdb.dts b/roms/u-boot/arch/arm/dts/fsl-ls2081a-rdb.dts
new file mode 100644
index 000000000..b0b7ef08a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls2081a-rdb.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS2081A RDB board device tree source for QSPI-boot
+ *
+ * Author: Priyanka Jain <priyanka.jain@nxp.com>
+ *
+ * Copyright 2017 NXP
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2081a RDB Board";
+	compatible = "fsl,ls2081a-rdb", "fsl,ls2080a";
+
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi;
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q512a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fs512s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+	qflash1: s25fs512s@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts b/roms/u-boot/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
new file mode 100644
index 000000000..179ed19bf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls2080a RDB board device tree source for QSPI-boot
+ *
+ * Author: Priyanka Jain <priyanka.jain@nxp.com>
+ *
+ * Copyright 2017 NXP
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a RDB Board";
+	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi;
+	};
+};
+
+&dpmac1 {
+	status = "okay";
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "xfi";
+};
+
+&dpmac2 {
+	status = "okay";
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "xfi";
+};
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "xfi";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "xfi";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "xfi";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "xfi";
+};
+
+&dpmac7 {
+	status = "okay";
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "xfi";
+};
+
+&dpmac8 {
+	status = "okay";
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "xfi";
+};
+
+&emdio1 {
+	status = "okay";
+
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1_phy@1 {
+		reg = <0x10>;
+	};
+	mdio1_phy2: emdio1_phy@2 {
+		reg = <0x11>;
+	};
+	mdio1_phy3: emdio1_phy@3 {
+		reg = <0x12>;
+	};
+	mdio1_phy4: emdio1_phy@4 {
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2_phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+	mdio2_phy2: emdio2_phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x1>;
+	};
+	mdio2_phy3: emdio2_phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x2>;
+	};
+	mdio2_phy4: emdio2_phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x3>;
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q512a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	pca9547@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		 i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts
new file mode 100644
index 000000000..585759162
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for SERDES protocol 19.11.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds-sd1-19.dtsi"
+
+#include "fsl-lx2160a-qds-sd2-11.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 19.11.x)";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts
new file mode 100644
index 000000000..ebe11396a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for SERDES protocol 19.x.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds-sd1-19.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 19.x.x)";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts
new file mode 100644
index 000000000..d9f091896
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for SERDES protocol 20.11.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds-sd1-20.dtsi"
+
+#include "fsl-lx2160a-qds-sd2-11.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 20.11.x)";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts
new file mode 100644
index 000000000..735d440d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for SERDES protocol 20.x.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds-sd1-20.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 20.x.x)";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts
new file mode 100644
index 000000000..3b21c87b9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for SERDES protocol 3.11.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds-sd1-3.dtsi"
+
+#include "fsl-lx2160a-qds-sd2-11.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 3.11.x)";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts
new file mode 100644
index 000000000..ede40563f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for SERDES protocol 3.x.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds-sd1-3.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 3.x.x)";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts
new file mode 100644
index 000000000..8100af472
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for SERDES protocol 7.11.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds-sd1-7.dtsi"
+
+#include "fsl-lx2160a-qds-sd2-11.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 7.11.x)";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts
new file mode 100644
index 000000000..15dee3587
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for SERDES protocol 7.x.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds-sd1-7.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 7-x-x)";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi
new file mode 100644
index 000000000..a31ff8a1b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 19
+ *
+ * Some assumptions are made:
+ *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4)
+ *    * mezzanine card M13 is connected to IO SLOT6 (25g-aui for DPMAC 5,6)
+ *    * mezzanine card M7 is connected to IO SLOT2 (xlaui4 for DPMAC 2)
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac2 {
+	status = "okay";
+	phy-handle = <&cortina_phy0>;
+	phy-connection-type = "xlaui4";
+};
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&inphi_phy0>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&inphi_phy1>;
+	phy-connection-type = "25g-aui";
+};
+
+&emdio1_slot1 {
+	aquantia_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+
+	aquantia_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x1>;
+	};
+};
+
+&emdio1_slot2 {
+	cortina_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+};
+
+&emdio1_slot6 {
+	inphi_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x0>;
+	};
+
+	inphi_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi
new file mode 100644
index 000000000..42e149691
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 20
+ *
+ * Some assumptions are made:
+ *    * 2 mezzanine cards M13 are connected to IO SLOT1 and IO SLOT2
+ *        (xlaui4 for DPMAC 1,2)
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac1 {
+	status = "okay";
+	phy-handle = <&cortina_phy1_0>;
+	phy-connection-type = "xlaui4";
+};
+
+&dpmac2 {
+	status = "okay";
+	phy-handle = <&cortina_phy2_0>;
+	phy-connection-type = "xlaui4";
+};
+
+&emdio1_slot1 {
+	cortina_phy1_0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+};
+
+&emdio1_slot2 {
+	cortina_phy2_0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi
new file mode 100644
index 000000000..256d784ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 3
+ *
+ * Some assumptions are made:
+ *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4,5,6)
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&aquantia_phy3>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&aquantia_phy4>;
+	phy-connection-type = "usxgmii";
+};
+
+&emdio1_slot1 {
+	aquantia_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+	aquantia_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x1>;
+	};
+	aquantia_phy3: ethernet-phy@6 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x2>;
+	};
+	aquantia_phy4: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x3>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi
new file mode 100644
index 000000000..5fcf846c1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 7
+ *
+ * Some assumptions are made:
+ *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4,5,6)
+ *    * mezzanine card M1/M4 is connected to IO SLOT2 (sgmii for DPMAC 7,8,9,10)
+ *
+ * Copyright 2020 NXP
+ *
+ */
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&aquantia_phy3>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&aquantia_phy4>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac7 {
+	status = "okay";
+	phy-handle = <&sgmii_phy1>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac8 {
+	status = "okay";
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac9 {
+	status = "okay";
+	phy-handle = <&sgmii_phy3>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac10 {
+	status = "okay";
+	phy-handle = <&sgmii_phy4>;
+	phy-connection-type = "sgmii";
+};
+
+&emdio1_slot1 {
+	aquantia_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+
+	aquantia_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x1>;
+	};
+
+	aquantia_phy3: ethernet-phy@6 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x2>;
+	};
+
+	aquantia_phy4: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x3>;
+	};
+};
+
+&emdio1_slot2 {
+	sgmii_phy1: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
+
+	sgmii_phy2: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	sgmii_phy3: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	sgmii_phy4: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi
new file mode 100644
index 000000000..cf09f98aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS device tree source for the SERDES block #2 - protocol 11
+ *
+ * Some assumptions are made:
+ *    * 2 mezzanine cards M1/M4 are connected to IO SLOT 7 and IO SLOT 8
+ *       (sgmii for DPMAC 12, 13, 14, 16, 17, 18)
+ *
+ * Copyright 2020 NXP
+ *
+ */
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac12 {
+	status = "okay";
+	phy-handle = <&sgmii_phy7_2>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac17 {
+	status = "okay";
+	phy-handle = <&sgmii_phy7_3>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac18 {
+	status = "okay";
+	phy-handle = <&sgmii_phy7_4>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac16 {
+	status = "okay";
+	phy-handle = <&sgmii_phy8_2>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac13 {
+	status = "okay";
+	phy-handle = <&sgmii_phy8_3>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac14 {
+	status = "okay";
+	phy-handle = <&sgmii_phy8_4>;
+	phy-connection-type = "sgmii";
+};
+
+&emdio1_slot7 {
+	sgmii_phy7_2: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	sgmii_phy7_3: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	sgmii_phy7_4: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
+
+&emdio1_slot8 {
+	sgmii_phy8_2: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	sgmii_phy8_3: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	sgmii_phy8_4: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds.dts
new file mode 100644
index 000000000..332c778d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS default device tree source
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board";
+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds.dtsi
new file mode 100644
index 000000000..288607c03
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-qds.dtsi
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160AQDS common device tree source
+ *
+ * Copyright 2018-2020 NXP
+ *
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	aliases {
+		spi0 = &fspi;
+	};
+};
+
+&dpmac17 {
+	status = "okay";
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	status = "okay";
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash3: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+	dflash4: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash5: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&dspi2 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash6: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+	dflash7: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash8: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	fpga@66 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-mfd";
+		reg = <0x66>;
+
+		mux-mdio@54 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mdio-mux-i2creg";
+			reg = <0x54>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf8>; // reg 0x54, bits 7:3
+			mdio-parent-bus = <&emdio1>;
+
+			mdio@00 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x00>;
+
+				rgmii_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+			mdio@08 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x40>;
+
+				rgmii_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+			};
+
+			emdio1_slot1: mdio@c0 { /* I/O Slot #1 */
+				reg = <0xC0>;
+				device-name = "emdio1_slot1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot2: mdio@c8 { /* I/O Slot #2 */
+				reg = <0xC8>;
+				device-name = "emdio1_slot2";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot3: mdio@d0 { /* I/O Slot #3 */
+				reg = <0xD0>;
+				device-name = "emdio1_slot3";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot4: mdio@d8 { /* I/O Slot #4 */
+				reg = <0xD8>;
+				device-name = "emdio1_slot4";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot5: mdio@e0 { /* I/O Slot #5 */
+				reg = <0xE0>;
+				device-name = "emdio1_slot5";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot6: mdio@e8 { /* I/O Slot #6 */
+				reg = <0xE8>;
+				device-name = "emdio1_slot6";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot7: mdio@f0 { /* I/O Slot #7 */
+				reg = <0xF0>;
+				device-name = "emdio1_slot7";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot8: mdio@f8 { /* I/O Slot #8 */
+				reg = <0xF8>;
+				device-name = "emdio1_slot8";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a-rdb.dts b/roms/u-boot/arch/arm/dts/fsl-lx2160a-rdb.dts
new file mode 100644
index 000000000..5fbdd9070
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160ARDB device tree source
+ *
+ * Author:	Priyanka Jain <priyanka.jain@nxp.com>
+ *		Sriram Dash <sriram.dash@nxp.com>
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160ARDB Board";
+	compatible = "fsl,lx2160ardb", "fsl,lx2160a";
+	aliases {
+		spi0 = &fspi;
+	};
+};
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac17 {
+	status = "okay";
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	status = "okay";
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+	rgmii_phy1: ethernet-phy@1 {
+		/* AR8035 PHY - "compatible" property not strictly needed */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x1>;
+		/* Poll mode - no "interrupts" property defined */
+	};
+	rgmii_phy2: ethernet-phy@2 {
+		/* AR8035 PHY - "compatible" property not strictly needed */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x2>;
+		/* Poll mode - no "interrupts" property defined */
+	};
+	aquantia_phy1: ethernet-phy@4 {
+		/* AQR107 PHY - "compatible" property not strictly needed */
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x4>;
+	};
+	aquantia_phy2: ethernet-phy@5 {
+		/* AQR107 PHY - "compatible" property not strictly needed */
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5>;
+	};
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+
+	mt35xu512aba1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "pcf2127-rtc";
+		reg = <0x51>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2160a.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2160a.dtsi
new file mode 100644
index 000000000..a6f0e9bc5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2160a.dtsi
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP lx2160a SOC common device tree source
+ *
+ * Copyright 2018-2020 NXP
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,lx2160a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	clockgen: clocking@1300000 {
+		compatible = "fsl,ls2080a-clockgen";
+		reg = <0 0x1300000 0 0xa0000>;
+		#clock-cells = <2>;
+		clocks = <&sysclk>;
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06200000 0 0x100000>; /* GICR */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	gic_lpi_base: syscon@0x80000000 {
+		compatible = "gic-lpi-base";
+		reg = <0x0 0x80000000 0x0 0x200000>;
+		max-gic-redistributors = <16>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical NS PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	fspi: flexspi@20c0000 {
+		compatible = "nxp,lx2160a-fspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x20c0000 0x0 0x10000>,
+			<0x0 0x20000000 0x0 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+		clock-names = "fspi_en", "fspi";
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@2000000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+		scl-gpio = <&gpio2 15 0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@2010000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2020000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@2030000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@2040000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2040000 0x0 0x10000>;
+		interrupts = <0 74 4>;
+		scl-gpio = <&gpio2 16 0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@2050000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2050000 0x0 0x10000>;
+		interrupts = <0 74 4>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@2060000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2060000 0x0 0x10000>;
+		interrupts = <0 75 4>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@2070000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2070000 0x0 0x10000>;
+		interrupts = <0 75 4>;
+		status = "disabled";
+	};
+
+	uart0: serial@21c0000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x21c0000 0x0 0x1000>;
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	uart1: serial@21d0000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x21d0000 0x0 0x1000>;
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	uart2: serial@21e0000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x21e0000 0x0 0x1000>;
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	uart3: serial@21f0000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x21f0000 0x0 0x1000>;
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	dspi0: dspi@2100000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2100000 0x0 0x10000>;
+		interrupts = <0 26 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	dspi1: dspi@2110000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2110000 0x0 0x10000>;
+		interrupts = <0 26 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	dspi2: dspi@2120000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2120000 0x0 0x10000>;
+		interrupts = <0 241 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	gpio0: gpio@2300000 {
+		compatible = "fsl,qoriq-gpio";
+		reg = <0x0 0x2300000 0x0 0x10000>;
+		interrupts = <0 36 4>;
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@2310000 {
+		compatible = "fsl,qoriq-gpio";
+		reg = <0x0 0x2310000 0x0 0x10000>;
+		interrupts = <0 36 4>;
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@2320000 {
+		compatible = "fsl,qoriq-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <0 37 4>;
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@2330000 {
+		compatible = "fsl,qoriq-gpio";
+		reg = <0x0 0x2330000 0x0 0x10000>;
+		interrupts = <0 37 4>;
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	watchdog@23a0000 {
+		compatible = "arm,sbsa-gwdt";
+		reg = <0x0 0x23a0000 0 0x1000>,
+		      <0x0 0x2390000 0 0x1000>;
+		timeout-sec = <30>;
+	};
+
+	usb0: usb3@3100000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3100000 0x0 0x10000>;
+		interrupts = <0 80 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
+	usb1: usb3@3110000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3110000 0x0 0x10000>;
+		interrupts = <0 81 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
+	esdhc0: esdhc@2140000 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2140000 0x0 0x10000>;
+		interrupts = <0 28 0x4>; /* Level high type */
+		clocks = <&clockgen 4 1>;
+		voltage-ranges = <1800 1800 3300 3300>;
+		sdhci,auto-cmd12;
+		little-endian;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	esdhc1: esdhc@2150000 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2150000 0x0 0x10000>;
+		interrupts = <0 63 0x4>; /* Level high type */
+		clocks = <&clockgen 4 1>;
+		voltage-ranges = <1800 1800 3300 3300>;
+		sdhci,auto-cmd12;
+		non-removable;
+		little-endian;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	sata0: sata@3200000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata1: sata@3210000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>;
+			interrupts = <0 136 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata2: sata@3220000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3220000 0x0 0x10000>;
+			interrupts = <0 97 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata3: sata@3230000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3230000 0x0 0x10000>;
+			interrupts = <0 100 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	pcie1: pcie@3400000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03400000 0x0 0x80000   /* PAB registers */
+		       0x00 0x03480000 0x0 0x40000   /* LUT registers */
+		       0x00 0x034c0000 0x0 0x40000   /* PF control registers */
+		       0x80 0x00000000 0x0 0x2000>; /* configuration space */
+		reg-names = "ccsr", "lut", "pf_ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie2: pcie@3500000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03500000 0x0 0x80000   /* PAB registers */
+		       0x00 0x03580000 0x0 0x40000   /* LUT registers */
+		       0x00 0x035c0000 0x0 0x40000   /* PF control registers */
+		       0x88 0x00000000 0x0 0x2000>; /* configuration space */
+		reg-names = "ccsr", "lut", "pf_ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <2>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie3: pcie@3600000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03600000 0x0 0x80000   /* PAB registers */
+		       0x00 0x03680000 0x0 0x40000   /* LUT registers */
+		       0x00 0x036c0000 0x0 0x40000   /* PF control registers */
+		       0x90 0x00000000 0x0 0x2000>; /* configuration space */
+		reg-names = "ccsr", "lut", "pf_ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x90 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie4: pcie@3700000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03700000 0x0 0x80000   /* PAB registers */
+		       0x00 0x03780000 0x0 0x40000   /* LUT registers */
+		       0x00 0x037c0000 0x0 0x40000   /* PF control registers */
+		       0x98 0x00000000 0x0 0x2000>; /* configuration space */
+		reg-names = "ccsr", "lut", "pf_ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x98 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie5: pcie@3800000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03800000 0x0 0x80000   /* PAB registers */
+		       0x00 0x03880000 0x0 0x40000   /* LUT registers */
+		       0x00 0x038c0000 0x0 0x40000   /* PF control registers */
+		       0xa0 0x00000000 0x0 0x2000>; /* configuration space */
+		reg-names = "ccsr", "lut", "pf_ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0xa0 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie6: pcie@3900000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03900000 0x0 0x80000   /* PAB registers */
+		       0x00 0x03980000 0x0 0x40000   /* LUT registers */
+		       0x00 0x039c0000 0x0 0x40000   /* PF control registers */
+		       0xa8 0x00000000 0x0 0x2000>; /* configuration space */
+		reg-names = "ccsr", "lut", "pf_ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0xa8 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc", "simple-mfd";
+		reg = <0x00000008 0x0c000000 0 0x40>,
+		      <0x00000000 0x08340000 0 0x40000>;
+		#address-cells = <3>;
+		#size-cells = <1>;
+
+		/*
+		 * Region type 0x0 - MC portals
+		 * Region type 0x1 - QBMAN portals
+		 */
+		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+			  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+		dpmacs {
+			compatible = "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dpmac1: dpmac@1 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x1>;
+				status = "disabled";
+			};
+
+			dpmac2: dpmac@2 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x2>;
+				status = "disabled";
+			};
+
+			dpmac3: dpmac@3 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x3>;
+				status = "disabled";
+			};
+
+			dpmac4: dpmac@4 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x4>;
+				status = "disabled";
+			};
+
+			dpmac5: dpmac@5 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x5>;
+				status = "disabled";
+			};
+
+			dpmac6: dpmac@6 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x6>;
+				status = "disabled";
+			};
+
+			dpmac7: dpmac@7 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x7>;
+				status = "disabled";
+			};
+
+			dpmac8: dpmac@8 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x8>;
+				status = "disabled";
+			};
+
+			dpmac9: dpmac@9 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x9>;
+				status = "disabled";
+			};
+
+			dpmac10: dpmac@a {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xa>;
+				status = "disabled";
+			};
+
+			dpmac11: dpmac@b {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xb>;
+				status = "disabled";
+			};
+
+			dpmac12: dpmac@c {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xc>;
+				status = "disabled";
+			};
+
+			dpmac13: dpmac@d {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xd>;
+				status = "disabled";
+			};
+
+			dpmac14: dpmac@e {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xe>;
+				status = "disabled";
+			};
+
+			dpmac15: dpmac@f {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xf>;
+				status = "disabled";
+			};
+
+			dpmac16: dpmac@10 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x10>;
+				status = "disabled";
+			};
+
+			dpmac17: dpmac@11 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x11>;
+				status = "disabled";
+			};
+
+			dpmac18: dpmac@12 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x12>;
+				status = "disabled";
+			};
+		};
+	};
+
+	/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+	emdio1: mdio@8b96000 {
+		compatible = "fsl,ls-mdio";
+		reg = <0x0 0x8b96000 0x0 0x1000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	/* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
+	emdio2: mdio@8b97000 {
+		compatible = "fsl,ls-mdio";
+		reg = <0x0 0x8b97000 0x0 0x1000>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-17-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-17-x.dts
new file mode 100644
index 000000000..8a8895f02
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-17-x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for SERDES protocol 17.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2162a-qds-sd1-17.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 17.x)";
+	compatible = "fsl,lx2162aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-18-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-18-x.dts
new file mode 100644
index 000000000..c28e5e249
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-18-x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for SERDES protocol 18.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2162a-qds-sd1-18.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 18.x)";
+	compatible = "fsl,lx2162aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-20-x.dts b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-20-x.dts
new file mode 100644
index 000000000..7882c767e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-20-x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for SERDES protocol 20.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2162a-qds-sd1-20.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS Board (DTS 20.x)";
+	compatible = "fsl,lx2162aqds", "fsl,lx2160a";
+
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi
new file mode 100644
index 000000000..d1e4a8567
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 17
+ *
+ * Some assumptions are made:
+ *    * mezzanine card M8 is connected to IO SLOT1 (25g-aui for DPMAC 3,4,5,6)
+ *
+ * Copyright 2020-2021 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&inphi_phy0>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&inphi_phy1>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&inphi_phy2>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&inphi_phy3>;
+	phy-connection-type = "25g-aui";
+};
+
+&emdio1_slot1 {
+	inphi_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x0>;
+	};
+
+	inphi_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x1>;
+	};
+
+	inphi_phy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x2>;
+	};
+
+	inphi_phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x3>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi
new file mode 100644
index 000000000..e9a743b3a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 18
+ *
+ * Some assumptions are made:
+ *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4)
+ *    * mezzanine card M13/M8 is connected to IO SLOT6 (25g-aui for DPMAC 5,6)
+ *
+ * Copyright 2020-2021 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac5 {
+	status = "okay";
+	phy-handle = <&inphi_phy0>;
+	phy-connection-type = "25g-aui";
+};
+
+&dpmac6 {
+	status = "okay";
+	phy-handle = <&inphi_phy1>;
+	phy-connection-type = "25g-aui";
+};
+
+&emdio1_slot1 {
+	aquantia_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+
+	aquantia_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x1>;
+	};
+};
+
+&emdio1_slot6 {
+	inphi_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x0>;
+	};
+
+	inphi_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x1>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi
new file mode 100644
index 000000000..d9ad1c6a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 20
+ *
+ * Some assumptions are made:
+ *    * Mezzanine card M8 is connected to IO SLOT1
+ *        (xlaui4 for DPMAC 1)
+ *
+ * Copyright 2020-2021 NXP
+ *
+ */
+
+#include "fsl-lx2160a-qds.dtsi"
+
+&dpmac1 {
+	status = "okay";
+	phy-handle = <&cortina_phy1_0>;
+	phy-connection-type = "xlaui4";
+};
+
+&emdio1_slot1 {
+	cortina_phy1_0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds.dts b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds.dts
new file mode 100644
index 000000000..0ca30df86
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-lx2162a-qds.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2162AQDS device tree source
+ *
+ * Copyright 2020-2021 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a-qds.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2162AQDS Board";
+	compatible = "fsl,lx2162aqds", "fsl,lx2160a";
+
+	aliases {
+		spi1 = &dspi0;
+		spi2 = &dspi1;
+		spi3 = &dspi2;
+	};
+};
+
+&usb1 {
+	status = "disabled";
+};
+
+&pcie2 {
+	status = "disabled";
+};
+
+&pcie5 {
+	status = "disabled";
+};
+
+&pcie6 {
+	status = "disabled";
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash3: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+	dflash4: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash5: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&dspi2 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash6: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+	dflash7: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+	};
+	dflash8: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-sch-24801.dtsi b/roms/u-boot/arch/arm/dts/fsl-sch-24801.dtsi
new file mode 100644
index 000000000..304afdabc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-sch-24801.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device tree fragment for RCW SCH-24801 card
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * SCH-24801 is a 4xSGMII add-on card used with various FSL QDS boards.
+ * It integrates a VSC8234 quad PHY which supports 4 SGMII interfaces.
+ * PHY addresses are 0x1c - 0x1f.
+ * On the card the first port is the top port (farthest from PEX connector).
+ */
+phy@1c {
+	reg = <0x1c>;
+};
+
+phy@1d {
+	reg = <0x1d>;
+};
+
+phy@1e {
+	reg = <0x1e>;
+};
+
+phy@1f {
+	reg = <0x1f>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-sch-28021.dtsi b/roms/u-boot/arch/arm/dts/fsl-sch-28021.dtsi
new file mode 100644
index 000000000..584f3fa68
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-sch-28021.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device tree fragment for RCW SCH-28021 card
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * SCH-28021 is a QSGMII add-on card used with various FSL QDS boards.
+ * It integrates a VSC8514 quad PHY which supports 4 interfaces muxed on a
+ * single QSGMII lane.
+ * PHY addresses are 0x08 - 0x0b.
+ * On the card the first port is the top port (farthest from PEX connector).
+ */
+phy@08 {
+	reg = <0x08>;
+};
+
+phy@09 {
+	reg = <0x09>;
+};
+
+phy@0a {
+	reg = <0x0a>;
+};
+
+phy@0b {
+	reg = <0x0b>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-sch-30841.dtsi b/roms/u-boot/arch/arm/dts/fsl-sch-30841.dtsi
new file mode 100644
index 000000000..ca437d178
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-sch-30841.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device tree fragment for RCW SCH-30841 card
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * SCH-30841 is a 4 port add-on card used with various FSL QDS boards.
+ * It integrates a AQR412C quad PHY which supports 4 interfaces either muxed
+ * together on a single lane or mapped 1:1 to serdes lanes.
+ * It supports several protocols - SGMII, SGMII-2500, USXGMII, M-USX, XFI.
+ * PHY addresses are 0x00 - 0x03.
+ * On the card the first port is the bottom port (closest to PEX connector).
+ */
+phy@00 {
+	reg = <0x00>;
+	mdi-reversal = <1>;
+	smb-addr = <0x25>;
+};
+
+phy@01 {
+	reg = <0x01>;
+	mdi-reversal = <1>;
+	smb-addr = <0x26>;
+};
+
+phy@02 {
+	reg = <0x02>;
+	mdi-reversal = <1>;
+	smb-addr = <0x27>;
+};
+
+phy@03 {
+	reg = <0x03>;
+	mdi-reversal = <1>;
+	smb-addr = <0x28>;
+};
diff --git a/roms/u-boot/arch/arm/dts/fsl-sch-30842.dtsi b/roms/u-boot/arch/arm/dts/fsl-sch-30842.dtsi
new file mode 100644
index 000000000..fa0f2cdb1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/fsl-sch-30842.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Device tree fragment for RCW SCH-30842 card
+ *
+ * Copyright 2019-2021 NXP Semiconductors
+ */
+
+/*
+ * SCH-30842 is a single port add-on card used with various FSL QDS boards.
+ * It integrates a AQR112 PHY, which supports several protocols - SGMII,
+ * SGMII-2500, USXGMII, XFI.
+ * PHY address is 0x02.
+ */
+phy@02 {
+	reg = <0x02>;
+	mdi-reversal = <1>;
+	smb-addr = <0x25>;
+};
diff --git a/roms/u-boot/arch/arm/dts/hi3660-hikey960-u-boot.dtsi b/roms/u-boot/arch/arm/dts/hi3660-hikey960-u-boot.dtsi
new file mode 100644
index 000000000..648c77f8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi3660-hikey960-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+
+&dwmmc1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/hi3660-hikey960.dts b/roms/u-boot/arch/arm/dts/hi3660-hikey960.dts
new file mode 100644
index 000000000..9fbfb422c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi3660-hikey960.dts
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey960 Development Board
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3660.dtsi"
+#include "hikey960-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HiKey960";
+	compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+
+	aliases {
+		mshc1 = &dwmmc1;
+		mshc2 = &dwmmc2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial6:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* rewrite this at bootloader */
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@32000000 {
+			compatible = "ramoops";
+			reg = <0x0 0x32000000 0x0 0x00100000>;
+			record-size	= <0x00020000>;
+			console-size	= <0x00020000>;
+			ftrace-size	= <0x00020000>;
+		};
+	};
+
+	reboot-mode-syscon@32100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x32100000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal	= <0x77665501>;
+			mode-bootloader	= <0x77665500>;
+			mode-recovery	= <0x77665502>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
+
+		power {
+			wakeup-source;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "green:user1";
+			/* gpio_150_user_led1 */
+			gpios = <&gpio18 6 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "green:user2";
+			/* gpio_151_user_led2 */
+			gpios = <&gpio18 7 0>;
+			linux,default-trigger = "none";
+		};
+
+		user_led3 {
+			label = "green:user3";
+			/* gpio_189_user_led3 */
+			gpios = <&gpio23 5 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led4 {
+			label = "green:user4";
+			/* gpio_190_user_led4 */
+			gpios = <&gpio23 6 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			/* gpio_205_wifi_active */
+			gpios = <&gpio25 5 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&gpio25 7 0>;
+			/* gpio_207_user_led1 */
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	pmic: pmic@fff34000 {
+		compatible = "hisilicon,hi6421v530-pmic";
+		reg = <0x0 0xfff34000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			ldo3: LDO3 { /* HDMI */
+				regulator-name = "VOUT3_1V85";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo9: LDO9 { /* SDCARD I/O */
+				regulator-name = "VOUT9_1V8_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			ldo11: LDO11 { /* Low Speed Connector */
+				regulator-name = "VOUT11_1V8_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			ldo15: LDO15 { /* UFS VCC */
+				regulator-name = "VOUT15_3V0";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo16: LDO16 { /* SD VDD */
+				regulator-name = "VOUT16_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+		};
+	};
+
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* GPIO_051_WIFI_EN */
+		gpio = <&gpio6 3 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from "HiKey 960 Board ver A" schematics
+ * from Huawei. The 40 pin low speed expansion connector is named
+ * J2002 63453-140LF.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	/* GPIO_000-GPIO_007 */
+	gpio-line-names =
+		"",
+		"TP901", /* TEST_MODE connected to TP901 */
+		"[PMU0_SSI]",
+		"[PMU1_SSI]",
+		"[PMU2_SSI]",
+		"[PMU0_CLKOUT]",
+		"[JTAG_TCK]",
+		"[JTAG_TMS]";
+};
+
+&gpio1 {
+	/* GPIO_008-GPIO_015 */
+	gpio-line-names =
+		"[JTAG_TRST_N]",
+		"[JTAG_TDI]",
+		"[JTAG_TDO]",
+		"NC", "NC",
+		"[I2C3_SCL]",
+		"[I2C3_SDA]",
+		"NC";
+};
+
+&gpio2 {
+	/* GPIO_016-GPIO_023 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO-J", /* LSEC pin 32: GPIO_019 */
+		"GPIO_020_HDMI_SEL",
+		"GPIO-L", /* LSEC pin 34: GPIO_021 */
+		"GPIO_022_UFSBUCK_INT_N",
+		"GPIO-G"; /* LSEC pin 29: LCD_TE0 */
+};
+
+&gpio3 {
+	/* GPIO_024-GPIO_031 */
+	/* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
+	gpio-line-names =
+		"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+		"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+		"NC",
+		"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+		"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+		"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+		"[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
+		"NC";
+};
+
+&gpio4 {
+	/* GPIO_032-GPIO_039 */
+	gpio-line-names =
+		"NC", "NC",
+		"PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
+		"GPIO_035_PMU2_EN",
+		"GPIO_036_USB_HUB_RESET",
+		"NC", "NC", "NC";
+};
+
+&gpio5 {
+	/* GPIO_040-GPIO_047 */
+	gpio-line-names =
+		"GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
+		"GPIO_041_HDMI_PD",
+		"TP904", /* Test point */
+		"TP905", /* Test point */
+		"NC", "NC",
+		"GPIO_046_HUB_VDD33_EN",
+		"GPIO_047_PMU1_EN";
+};
+
+&gpio6 {
+	/* GPIO_048-GPIO_055 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO_051_WIFI_EN",
+		"GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
+		/*
+		 * These two pins should be used for SD(IO) data according to the
+		 * 96boards specification but seems to be repurposed for a IRDA UART.
+		 * They are however named according to the spec.
+		 */
+		"[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
+		"[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
+		"[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
+};
+
+&gpio7 {
+	/* GPIO_056-GPIO_063 */
+	gpio-line-names =
+		"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+		"[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
+		"[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
+		"[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
+		"[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
+		"[SOC_BT_UART4_CTS_N]",
+		"[SOC_BT_UART4_RTS_N]",
+		"[SOC_BT_UART4_RXD]";
+};
+
+&gpio8 {
+	/* GPIO_064-GPIO_071 */
+	gpio-line-names =
+		"[SOC_BT_UART4_TXD]",
+		"NC",
+		"[PMU_HKADC_SSI]",
+		"NC",
+		"GPIO_068_SEL",
+		"NC", "NC", "NC";
+
+};
+
+&gpio9 {
+	/* GPIO_072-GPIO_079 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
+		"NC", "NC", "NC", "NC";
+};
+
+&gpio10 {
+	/* GPIO_080-GPIO_087 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio11 {
+	/* GPIO_088-GPIO_095 */
+	gpio-line-names =
+		"NC",
+		"[PCIE_PERST_N]",
+		"NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio12 {
+	/* GPIO_096-GPIO_103 */
+	gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
+};
+
+&gpio13 {
+	/* GPIO_104-GPIO_111 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio14 {
+	/* GPIO_112-GPIO_119 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio15 {
+	/* GPIO_120-GPIO_127 */
+	gpio-line-names =
+		"NC", "NC", "NC", "NC", "NC", "NC",
+		"GPIO_126_BT_EN",
+		"TP902"; /* GPIO_127_JTAG_SEL0 */
+};
+
+&gpio16 {
+	/* GPIO_128-GPIO_135 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio17 {
+	/* GPIO_136-GPIO_143 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio18 {
+	/* GPIO_144-GPIO_151 */
+	gpio-line-names =
+		"[UFS_REF_CLK]",
+		"[UFS_RST_N]",
+		"[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
+		"[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
+		"[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
+		"[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
+		"GPIO_150_USER_LED1",
+		"GPIO_151_USER_LED2";
+};
+
+&gpio19 {
+	/* GPIO_152-GPIO_159 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
+};
+
+&gpio20 {
+	/* GPIO_160-GPIO_167 */
+	gpio-line-names =
+		"[SD_CLK]",
+		"[SD_CMD]",
+		"[SD_DATA0]",
+		"[SD_DATA1]",
+		"[SD_DATA2]",
+		"[SD_DATA3]",
+		"", "";
+};
+
+&gpio21 {
+	/* GPIO_168-GPIO_175 */
+	gpio-line-names =
+		"[WL_SDIO_CLK]",
+		"[WL_SDIO_CMD]",
+		"[WL_SDIO_DATA0]",
+		"[WL_SDIO_DATA1]",
+		"[WL_SDIO_DATA2]",
+		"[WL_SDIO_DATA3]",
+		"", "";
+};
+
+&gpio22 {
+	/* GPIO_176-GPIO_183 */
+	gpio-line-names =
+		"[GPIO_176_PMU_PWR_HOLD]",
+		"NA",
+		"[SYSCLK_EN]",
+		"GPIO_179_WL_WAKEUP_AP",
+		"GPIO_180_HDMI_INT",
+		"NA",
+		"GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
+		"[I2C0_SCL]"; /* LSEC pin 15 */
+};
+
+&gpio23 {
+	/* GPIO_184-GPIO_191 */
+	gpio-line-names =
+		"[I2C0_SDA]", /* LSEC pin 17 */
+		"[I2C1_SCL]", /* Actual SoC I2C1 */
+		"[I2C1_SDA]", /* Actual SoC I2C1 */
+		"[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
+		"[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
+		"GPIO_189_USER_LED3",
+		"GPIO_190_USER_LED4",
+		"";
+};
+
+&gpio24 {
+	/* GPIO_192-GPIO_199 */
+	gpio-line-names =
+		"[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
+		"[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
+		"[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
+		"[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
+		"[GPIO_196_I2S2_DI]",
+		"[GPIO_197_I2S2_DO]",
+		"[GPIO_198_I2S2_XCLK]",
+		"[GPIO_199_I2S2_XFS]";
+};
+
+&gpio25 {
+	/* GPIO_200-GPIO_207 */
+	gpio-line-names =
+		"NC",
+		"NC",
+		"GPIO_202_VBUS_TYPEC",
+		"GPIO_203_SD_DET",
+		"GPIO_204_PMU12_IRQ_N",
+		"GPIO_205_WIFI_ACTIVE",
+		"GPIO_206_USBSW_SEL",
+		"GPIO_207_BT_ACTIVE";
+};
+
+&gpio26 {
+	/* GPIO_208-GPIO_215 */
+	gpio-line-names =
+		"GPIO-A", /* LSEC pin 23: GPIO_208 */
+		"GPIO-B", /* LSEC pin 24: GPIO_209 */
+		"GPIO-C", /* LSEC pin 25: GPIO_210 */
+		"GPIO-D", /* LSEC pin 26: GPIO_211 */
+		"GPIO-E", /* LSEC pin 27: GPIO_212 */
+		"[PCIE_CLKREQ_N]",
+		"[PCIE_WAKE_N]",
+		"[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
+};
+
+&gpio27 {
+	/* GPIO_216-GPIO_223 */
+	gpio-line-names =
+		"[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
+		"[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
+		"[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
+		"GPIO_219_CC_INT",
+		"NC",
+		"NC",
+		"[PMU_INT]",
+		"";
+};
+
+&gpio28 {
+	/* GPIO_224-GPIO_231 */
+	gpio-line-names =
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	adv7533: adv7533@39 {
+		status = "ok";
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+	};
+};
+
+&uart3 {
+	/* On Low speed expansion */
+	label = "LS-UART0";
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
+};
+
+&i2c7 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&uart6 {
+	/* On Low speed expansion */
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&spi2 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&spi3 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&dwmmc1 {
+	cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pmx_func
+		     &sd_clk_cfg_func
+		     &sd_cfg_func>;
+	vmmc-supply = <&ldo16>;
+	vqmmc-supply = <&ldo9>;
+	status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+	bus-width = <0x4>;
+	non-removable;
+	broken-cd;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pmx_func
+		     &sdio_clk_cfg_func
+		     &sdio_cfg_func>;
+	/* WL_EN */
+	vmmc-supply = <&wlan_en>;
+	status = "ok";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;      /* sdio func num */
+		/* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
+		interrupt-parent = <&gpio22>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/hi3660.dtsi b/roms/u-boot/arch/arm/dts/hi3660.dtsi
new file mode 100644
index 000000000..65a45b0e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi3660.dtsi
@@ -0,0 +1,1157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3660 SoC
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3660-clock.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "hisilicon,hi3660";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <110>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <550>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <650>;
+				min-residency-us = <1500>;
+			};
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1600>;
+				min-residency-us = <3500>;
+			};
+
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <550>;
+				min-residency-us = <1500>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2900>;
+				min-residency-us = <3500>;
+			};
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		A73_L2: l2-cache1 {
+			compatible = "cache";
+		};
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <533000000>;
+			opp-microvolt = <700000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp01 {
+			opp-hz = /bits/ 64 <999000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp02 {
+			opp-hz = /bits/ 64 <1402000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp03 {
+			opp-hz = /bits/ 64 <1709000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp04 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp10 {
+			opp-hz = /bits/ 64 <903000000>;
+			opp-microvolt = <700000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp11 {
+			opp-hz = /bits/ 64 <1421000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp12 {
+			opp-hz = /bits/ 64 <1805000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp13 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp14 {
+			opp-hz = /bits/ 64 <2362000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	gic: interrupt-controller@e82b0000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+		      <0x0 0xe82b2000 0 0x2000>, /* GICC */
+		      <0x0 0xe82b4000 0 0x2000>, /* GICH */
+		      <0x0 0xe82b6000 0 0x2000>; /* GICV */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	a73-pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		crg_ctrl: crg_ctrl@fff35000 {
+			compatible = "hisilicon,hi3660-crgctrl", "syscon";
+			reg = <0x0 0xfff35000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		crg_rst: crg_rst_controller {
+			compatible = "hisilicon,hi3660-reset";
+			#reset-cells = <2>;
+			hisi,rst-syscon = <&crg_ctrl>;
+		};
+
+
+		pctrl: pctrl@e8a09000 {
+			compatible = "hisilicon,hi3660-pctrl", "syscon";
+			reg = <0x0 0xe8a09000 0x0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		pmuctrl: crg_ctrl@fff34000 {
+			compatible = "hisilicon,hi3660-pmuctrl", "syscon";
+			reg = <0x0 0xfff34000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sctrl: sctrl@fff0a000 {
+			compatible = "hisilicon,hi3660-sctrl", "syscon";
+			reg = <0x0 0xfff0a000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu: iomcu@ffd7e000 {
+			compatible = "hisilicon,hi3660-iomcu", "syscon";
+			reg = <0x0 0xffd7e000 0x0 0x1000>;
+			#clock-cells = <1>;
+
+		};
+
+		iomcu_rst: reset {
+			compatible = "hisilicon,hi3660-reset";
+			hisi,rst-syscon = <&iomcu>;
+			#reset-cells = <2>;
+		};
+
+		mailbox: mailbox@e896b000 {
+			compatible = "hisilicon,hi3660-mbox";
+			reg = <0x0 0xe896b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <3>;
+		};
+
+		stub_clock: stub_clock@e896b500 {
+			compatible = "hisilicon,hi3660-stub-clk";
+			reg = <0x0 0xe896b500 0x0 0x0100>;
+			#clock-cells = <1>;
+			mboxes = <&mailbox 13 3 0>;
+		};
+
+		dual_timer0: timer@fff14000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfff14000 0x0 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		i2c0: i2c@ffd71000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd71000 0x0 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
+			resets = <&iomcu_rst 0x20 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffd72000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd72000 0x0 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>;
+			resets = <&iomcu_rst 0x20 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fdf0c000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>;
+			resets = <&crg_rst 0x78 7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@fdf0b000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>;
+			resets = <&crg_rst 0x60 14>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>;
+			status = "disabled";
+		};
+
+		uart0: serial@fdf02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf02000 0x0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			status = "disabled";
+		};
+
+		uart1: serial@fdf00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas =  <&dma0 2 &dma0 3>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART1>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+			status = "disabled";
+		};
+
+		uart2: serial@fdf03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf03000 0x0 0x1000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas =  <&dma0 4 &dma0 5>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			status = "disabled";
+		};
+
+		uart3: serial@ffd74000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xffd74000 0x0 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			status = "disabled";
+		};
+
+		uart4: serial@fdf01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf01000 0x0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas =  <&dma0 6 &dma0 7>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART4>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			status = "disabled";
+		};
+
+		uart5: serial@fdf05000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf05000 0x0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas =  <&dma0 8 &dma0 9>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART5>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>;
+			status = "disabled";
+		};
+
+		uart6: serial@fff32000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfff32000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clock = <19200000>;
+			clocks = <&crg_ctrl HI3660_CLK_UART6>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
+			status = "disabled";
+		};
+
+		dma0: dma@fdf30000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0x0 0xfdf30000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+			dma-channel-mask = <0xfffe>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
+			dma-no-cci;
+			dma-type = "hi3660_dma";
+		};
+
+		asp_dmac: dma-controller@e804b000 {
+			compatible = "hisilicon,hisi-pcm-asp-dma-1.0";
+			reg = <0x0 0xe804b000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "asp_dma_irq";
+		};
+
+		rtc0: rtc@fff04000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0Xfff04000 0x0 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio0: gpio@e8a0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0b000 0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 0 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e8a0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0c000 0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 7 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e8a0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0d000 0 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 14 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e8a0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0e000 0 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 22 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e8a0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0f000 0 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 30 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@e8a10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a10000 0 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 38 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@e8a11000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a11000 0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 46 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@e8a12000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a12000 0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 54 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@e8a13000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a13000 0 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 62 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@e8a14000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a14000 0 0x1000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 70 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@e8a15000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a15000 0 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 78 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@e8a16000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a16000 0 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 86 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@e8a17000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a17000 0 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@e8a18000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a18000 0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 102 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@e8a19000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a19000 0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 110 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@e8a1a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1a000 0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 118 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@e8a1b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1b000 0 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@e8a1c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1c000 0 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@ff3b4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xff3b4000 0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx2 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@ff3b5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xff3b5000 0 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx2 0 8 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@e8a1f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1f000 0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 0 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@e8a20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a20000 0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx3 0 0 6>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO21>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio22: gpio@fff0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0b000 0 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO176 */
+			gpio-ranges = <&pmx4 2 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio23: gpio@fff0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0c000 0 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO184 */
+			gpio-ranges = <&pmx4 0 6 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio24: gpio@fff0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0d000 0 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO192 */
+			gpio-ranges = <&pmx4 0 13 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio25: gpio@fff0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0e000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO200 */
+			gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio26: gpio@fff0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0f000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO208 */
+			gpio-ranges = <&pmx4 0 28 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio27: gpio@fff10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff10000 0 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO216 */
+			gpio-ranges = <&pmx4 0 36 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio28: gpio@fff1d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff1d000 0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		spi2: spi@ffd68000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xffd68000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>;
+			clock-names = "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pmx_func>;
+			num-cs = <1>;
+			cs-gpios = <&gpio27 2 0>;
+			status = "disabled";
+		};
+
+		spi3: spi@ff3b3000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xff3b3000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>;
+			clock-names = "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_pmx_func>;
+			num-cs = <1>;
+			cs-gpios = <&gpio18 5 0>;
+			status = "disabled";
+		};
+
+		pcie@f4000000 {
+			compatible = "hisilicon,kirin960-pcie";
+			reg = <0x0 0xf4000000 0x0 0x1000>,
+			      <0x0 0xff3fe000 0x0 0x1000>,
+			      <0x0 0xf3f20000 0x0 0x40000>,
+			      <0x0 0xf5000000 0x0 0x2000>;
+			reg-names = "dbi", "apb", "phy", "config";
+			bus-range = <0x0  0x1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0x00000000
+				  0x0 0xf6000000
+				  0x0 0x02000000>;
+			num-lanes = <1>;
+			#interrupt-cells = <1>;
+			interrupts = <0 283 4>;
+			interrupt-names = "msi";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1
+					 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 2
+					 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 3
+					 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 4
+					 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+				 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+				 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+				 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+				 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+			clock-names = "pcie_phy_ref", "pcie_aux",
+				      "pcie_apb_phy", "pcie_apb_sys",
+				      "pcie_aclk";
+			reset-gpios = <&gpio11 1 0 >;
+		};
+
+		/* UFS */
+		ufs: ufs@ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>, <0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
+		/* SD */
+		dwmmc1: dwmmc1@ff37f000 {
+			compatible = "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff37f000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
+				<&crg_ctrl HI3660_HCLK_GATE_SD>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 18>;
+			reset-names = "reset";
+			hisilicon,peripheral-syscon = <&sctrl>;
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* SDIO */
+		dwmmc2: dwmmc2@ff3ff000 {
+			compatible = "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff3ff000 0x0 0x1000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
+				 <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
+			clock-names = "ciu", "biu";
+			resets = <&crg_rst 0x94 20>;
+			reset-names = "reset";
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@e8a06000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xe8a06000 0x0 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "apb_pclk";
+		};
+
+		watchdog1: watchdog@e8a07000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xe8a07000 0x0 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "apb_pclk";
+		};
+
+		tsensor: tsensor@fff30000 {
+			compatible = "hisilicon,hi3660-tsensor";
+			reg = <0x0 0xfff30000 0x0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+
+			cls0: cls0 {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				sustainable-power = <4500>;
+
+				/* sensor ID */
+				thermal-sensors = <&tsensor 1>;
+
+				trips {
+					threshold: trip-point@0 {
+						temperature = <65000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+
+					target: trip-point@1 {
+						temperature = <75000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						contribution = <1024>;
+						cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+					map1 {
+						trip = <&target>;
+						contribution = <512>;
+						cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/hi3798cv200-poplar.dts b/roms/u-boot/arch/arm/dts/hi3798cv200-poplar.dts
new file mode 100644
index 000000000..606ba55c7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi3798cv200-poplar.dts
@@ -0,0 +1,213 @@
+/*
+ * DTS File for HiSilicon Poplar Development Board
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hi3798cv200.dtsi"
+#include "poplar-pinctrl.dtsi"
+
+/ {
+	model = "HiSilicon Poplar Development Board";
+	compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
+
+	aliases {
+		serial0 = &uart0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led0 {
+			label = "USER-LED0";
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		user-led1 {
+			label = "USER-LED1";
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		user-led2 {
+			label = "USER-LED2";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+
+		user-led3 {
+			label = "USER-LED3";
+			gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_PCIE0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 7 0>;
+		enable-active-high;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+		     &emmc_pins_3 &emmc_pins_4>;
+	fifo-depth = <256>;
+	clock-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&eth_phy1>;
+	phy-mode = "rgmii";
+	hisilicon,phy-reset-delays-us = <10000 10000 30000>;
+
+	eth_phy1: phy@3 {
+		reg = <3>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+	gpio-line-names = "GPIO-E",	"",
+			  "",		"",
+			  "",		"GPIO-F",
+			  "",		"GPIO-J";
+};
+
+&gpio2 {
+	status = "okay";
+	gpio-line-names = "GPIO-H",	"GPIO-I",
+			  "GPIO-L",	"GPIO-G",
+			  "GPIO-K",	"",
+			  "",		"";
+};
+
+&gpio3 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "GPIO-C",	"",
+			  "",		"GPIO-B";
+};
+
+&gpio4 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"GPIO-D",
+			  "",		"";
+};
+
+&gpio5 {
+	status = "okay";
+	gpio-line-names = "",		"USER-LED-1",
+			  "USER-LED-2",	"",
+			  "",		"GPIO-A",
+			  "",		"";
+};
+
+&gpio6 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"USER-LED-0",
+			  "",		"",
+			  "",		"";
+};
+
+&gpio10 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"",
+			  "USER-LED-3",	"";
+};
+
+&i2c0 {
+	status = "okay";
+	label = "LS-I2C0";
+};
+
+&i2c2 {
+	status = "okay";
+	label = "LS-I2C1";
+};
+
+&ir {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&sd0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	label = "LS-SPI0";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	label = "LS-UART0";
+};
+/* No optional LS-UART1 on Low Speed Expansion Connector. */
diff --git a/roms/u-boot/arch/arm/dts/hi3798cv200-u-boot.dtsi b/roms/u-boot/arch/arm/dts/hi3798cv200-u-boot.dtsi
new file mode 100644
index 000000000..2de06d952
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi3798cv200-u-boot.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot addition to:
+ *  1) use platform data for the console
+ *  2) provide support for the generic-ehci USB driver currently not available
+ *     in the linux kernel (8/May/2017).
+ *
+ * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ */
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+&soc {
+	rst: reset-controller@8a22000 {
+		compatible = "hisilicon,hi3798cv200-reset";
+		reg = <0x8a22000 0x1000>;
+		#reset-cells = <3>;
+	};
+
+	usb2: ehci@9890000 {
+		compatible = "generic-ehci";
+		reg = <0x9890000 0x100>;
+		status = "okay";
+	};
+};
+
+&gmac1 {
+	resets = <&rst 0xcc 9  ASSERT_SET>,
+		 <&rst 0xcc 11 ASSERT_SET>,
+		 <&rst 0xcc 13 DEASSERT_SET>;
+};
+
+&uart0 {
+	clock = <75000000>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/hi3798cv200.dtsi b/roms/u-boot/arch/arm/dts/hi3798cv200.dtsi
new file mode 100644
index 000000000..7c0fddd7c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi3798cv200.dtsi
@@ -0,0 +1,622 @@
+/*
+ * DTS File for HiSilicon Hi3798cv200 SoC.
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <dt-bindings/clock/histb-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+	compatible = "hisilicon,hi3798cv200";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
+		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc@f0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xf0000000 0x10000000>;
+
+		crg: clock-reset-controller@8a22000 {
+			compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
+			reg = <0x8a22000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+
+			gmacphyrst: reset-controller {
+				compatible = "ti,syscon-reset";
+				#reset-cells = <1>;
+				ti,reset-bits =
+					<0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
+					 DEASSERT_SET|STATUS_NONE)>,
+					<0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
+					 DEASSERT_SET|STATUS_NONE)>;
+			};
+		};
+
+		sysctrl: system-controller@8000000 {
+			compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
+			reg = <0x8000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+		};
+
+		perictrl: peripheral-controller@8a20000 {
+			compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+				     "simple-mfd";
+			reg = <0x8a20000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8a20000 0x1000>;
+
+			usb2_phy1: usb2-phy@120 {
+				compatible = "hisilicon,hi3798cv200-usb2-phy";
+				reg = <0x120 0x4>;
+				clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+				resets = <&crg 0xbc 4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb2_phy1_port0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 8>;
+				};
+
+				usb2_phy1_port1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 9>;
+				};
+			};
+
+			usb2_phy2: usb2-phy@124 {
+				compatible = "hisilicon,hi3798cv200-usb2-phy";
+				reg = <0x124 0x4>;
+				clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
+				resets = <&crg 0xbc 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb2_phy2_port0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 10>;
+				};
+			};
+
+			combphy0: phy@850 {
+				compatible = "hisilicon,hi3798cv200-combphy";
+				reg = <0x850 0x8>;
+				#phy-cells = <1>;
+				clocks = <&crg HISTB_COMBPHY0_CLK>;
+				resets = <&crg 0x188 4>;
+				assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
+				assigned-clock-rates = <100000000>;
+				hisilicon,fixed-mode = <PHY_TYPE_USB3>;
+			};
+
+			combphy1: phy@858 {
+				compatible = "hisilicon,hi3798cv200-combphy";
+				reg = <0x858 0x8>;
+				#phy-cells = <1>;
+				clocks = <&crg HISTB_COMBPHY1_CLK>;
+				resets = <&crg 0x188 12>;
+				assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
+				assigned-clock-rates = <100000000>;
+				hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
+			};
+		};
+
+		pmx0: pinconf@8a21000 {
+			compatible = "pinconf-single";
+			reg = <0x8a21000 0x180>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			pinctrl-single,gpio-range = <
+				&range 0  8 2  /* GPIO 0 */
+				&range 8  1 0  /* GPIO 1 */
+				&range 9  4 2
+				&range 13 1 0
+				&range 14 1 1
+				&range 15 1 0
+				&range 16 5 0  /* GPIO 2 */
+				&range 21 3 1
+				&range 24 4 1  /* GPIO 3 */
+				&range 28 2 2
+				&range 86 1 1
+				&range 87 1 0
+				&range 30 4 2  /* GPIO 4 */
+				&range 34 3 0
+				&range 37 1 2
+				&range 38 3 2  /* GPIO 6 */
+				&range 41 5 0
+				&range 46 8 1  /* GPIO 7 */
+				&range 54 8 1  /* GPIO 8 */
+				&range 64 7 1  /* GPIO 9 */
+				&range 71 1 0
+				&range 72 6 1  /* GPIO 10 */
+				&range 78 1 0
+				&range 79 1 1
+				&range 80 6 1  /* GPIO 11 */
+				&range 70 2 1
+				&range 88 8 0  /* GPIO 12 */
+			>;
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		uart0: serial@8b00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x8b00000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl HISTB_UART0_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@8b02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x8b02000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_UART2_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		i2c0: i2c@8b10000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b10000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C0_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@8b11000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b11000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C1_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@8b12000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b12000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C2_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@8b13000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b13000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C3_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@8b14000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b14000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C4_CLK>;
+			status = "disabled";
+		};
+
+		spi0: spi@8b1a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8b1a000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			cs-gpios = <&gpio7 1 0>;
+			clocks = <&crg HISTB_SPI0_CLK>;
+			clock-names = "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sd0: mmc@9820000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x9820000 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_SDIO0_CIU_CLK>,
+				 <&crg HISTB_SDIO0_BIU_CLK>;
+			clock-names = "ciu", "biu";
+			resets = <&crg 0x9c 4>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		emmc: mmc@9830000 {
+			compatible = "hisilicon,hi3798cv200-dw-mshc";
+			reg = <0x9830000 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_MMC_CIU_CLK>,
+				 <&crg HISTB_MMC_BIU_CLK>,
+				 <&crg HISTB_MMC_SAMPLE_CLK>,
+				 <&crg HISTB_MMC_DRV_CLK>;
+			clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+			resets = <&crg 0xa0 4>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		gpio0: gpio@8b20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b20000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 0 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio1: gpio@8b21000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b21000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 8 1
+				&pmx0 1 9 4
+				&pmx0 5 13 1
+				&pmx0 6 14 1
+				&pmx0 7 15 1
+			>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio2: gpio@8b22000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b22000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio3: gpio@8b23000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b23000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 24 4
+				&pmx0 4 28 2
+				&pmx0 6 86 1
+				&pmx0 7 87 1
+			>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio4: gpio@8b24000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b24000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio5: gpio@8004000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8004000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio6: gpio@8b26000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b26000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio7: gpio@8b27000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b27000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 46 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio8: gpio@8b28000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b28000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 54 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio9: gpio@8b29000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b29000 0x1000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio10: gpio@8b2a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2a000 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio11: gpio@8b2b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2b000 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio12: gpio@8b2c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2c000 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 88 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@9840000 {
+			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+			reg = <0x9840000 0x1000>,
+			      <0x984300c 0x4>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_ETH0_MAC_CLK>,
+				 <&crg HISTB_ETH0_MACIF_CLK>;
+			clock-names = "mac_core", "mac_ifc";
+			resets = <&crg 0xcc 8>,
+				 <&crg 0xcc 10>,
+				 <&gmacphyrst 0>;
+			reset-names = "mac_core", "mac_ifc", "phy";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@9841000 {
+			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+			reg = <0x9841000 0x1000>,
+			      <0x9843010 0x4>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_ETH1_MAC_CLK>,
+				 <&crg HISTB_ETH1_MACIF_CLK>;
+			clock-names = "mac_core", "mac_ifc";
+			resets = <&crg 0xcc 9>,
+				 <&crg 0xcc 11>,
+				 <&gmacphyrst 1>;
+			reset-names = "mac_core", "mac_ifc", "phy";
+			status = "disabled";
+		};
+
+		ir: ir@8001000 {
+			compatible = "hisilicon,hix5hd2-ir";
+			reg = <0x8001000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl HISTB_IR_CLK>;
+			status = "disabled";
+		};
+
+		pcie: pcie@9860000 {
+			compatible = "hisilicon,hi3798cv200-pcie";
+			reg = <0x9860000 0x1000>,
+			      <0x0 0x2000>,
+			      <0x2000000 0x01000000>;
+			reg-names = "control", "rc-dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0 15>;
+			num-lanes = <1>;
+			ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
+				  0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_PCIE_AUX_CLK>,
+				 <&crg HISTB_PCIE_PIPE_CLK>,
+				 <&crg HISTB_PCIE_SYS_CLK>,
+				 <&crg HISTB_PCIE_BUS_CLK>;
+			clock-names = "aux", "pipe", "sys", "bus";
+			resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+			reset-names = "soft", "sys", "bus";
+			phys = <&combphy1 PHY_TYPE_PCIE>;
+			phy-names = "phy";
+			status = "disabled";
+		};
+
+		ohci: ohci@9880000 {
+			compatible = "generic-ohci";
+			reg = <0x9880000 0x10000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_USB2_BUS_CLK>,
+				 <&crg HISTB_USB2_12M_CLK>,
+				 <&crg HISTB_USB2_48M_CLK>;
+			clock-names = "bus", "clk12", "clk48";
+			resets = <&crg 0xb8 12>;
+			reset-names = "bus";
+			phys = <&usb2_phy1_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci: ehci@9890000 {
+			compatible = "generic-ehci";
+			reg = <0x9890000 0x10000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_USB2_BUS_CLK>,
+				 <&crg HISTB_USB2_PHY_CLK>,
+				 <&crg HISTB_USB2_UTMI_CLK>;
+			clock-names = "bus", "phy", "utmi";
+			resets = <&crg 0xb8 12>,
+				 <&crg 0xb8 16>,
+				 <&crg 0xb8 13>;
+			reset-names = "bus", "phy", "utmi";
+			phys = <&usb2_phy1_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/hi6220-hikey-u-boot.dtsi b/roms/u-boot/arch/arm/dts/hi6220-hikey-u-boot.dtsi
new file mode 100644
index 000000000..311398324
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi6220-hikey-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+&mmc0 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/hi6220-hikey.dts b/roms/u-boot/arch/arm/dts/hi6220-hikey.dts
new file mode 100644
index 000000000..d63929348
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi6220-hikey.dts
@@ -0,0 +1,59 @@
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+/*Reserved 1MB memory for MCU*/
+/memreserve/ 0x05e00000 0x00100000;
+
+#include "hi6220.dtsi"
+
+/ {
+	model = "HiKey Development Board";
+	compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+
+	aliases {
+		serial0 = &uart0; /* On board UART0 */
+		serial1 = &uart1; /* BT UART */
+		serial2 = &uart2; /* LS Expansion UART0 */
+		serial3 = &uart3; /* LS Expansion UART1 */
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	non-removable;
+	bus-width = <8>;
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <4>;
+};
+
+&uart2 {
+	label = "LS-UART0";
+};
+&uart3 {
+	label = "LS-UART1";
+};
diff --git a/roms/u-boot/arch/arm/dts/hi6220.dtsi b/roms/u-boot/arch/arm/dts/hi6220.dtsi
new file mode 100644
index 000000000..501c8906f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hi6220.dtsi
@@ -0,0 +1,236 @@
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi6220-clock.h>
+
+/ {
+	compatible = "hisilicon,hi6220";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@f6801000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+		      <0x0 0xf6802000 0 0x2000>, /* GICC */
+		      <0x0 0xf6804000 0 0x2000>, /* GICH */
+		      <0x0 0xf6806000 0 0x2000>; /* GICV */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ao_ctrl: ao_ctrl@f7800000 {
+			compatible = "hisilicon,hi6220-aoctrl", "syscon";
+			reg = <0x0 0xf7800000 0x0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		sys_ctrl: sys_ctrl@f7030000 {
+			compatible = "hisilicon,hi6220-sysctrl", "syscon";
+			reg = <0x0 0xf7030000 0x0 0x2000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		media_ctrl: media_ctrl@f4410000 {
+			compatible = "hisilicon,hi6220-mediactrl", "syscon";
+			reg = <0x0 0xf4410000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pm_ctrl: pm_ctrl@f7032000 {
+			compatible = "hisilicon,hi6220-pmctrl", "syscon";
+			reg = <0x0 0xf7032000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmc0: dwmmc@f723d000 {
+			compatible = "hisilicon,hi6220-dw-mshc";
+			reg = <0x0 0xf723d000 0x0 0x1000>;
+			interrupts = <0x0 0x48 0x4>;
+			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
+			clock-names = "ciu", "biu";
+			status = "disabled";
+		};
+
+		mmc1: dwmmc@f723e000 {
+			compatible = "hisilicon,hi6220-dw-mshc";
+			reg = <0x0 0xf723e000 0x0 0x1000>;
+			interrupts = <0x0 0x49 0x4>;
+			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
+			clock-names = "ciu", "biu";
+			status = "disabled";
+		};
+
+		uart0: uart@f8015000 {	/* console */
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf8015000 0x0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clock = <19200000>;
+			clocks = <&ao_ctrl HI6220_UART0_PCLK>,
+				 <&ao_ctrl HI6220_UART0_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: uart@f7111000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7111000 0x0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clock = <19200000>;
+			clocks = <&sys_ctrl HI6220_UART1_PCLK>,
+				 <&sys_ctrl HI6220_UART1_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: uart@f7112000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7112000 0x0 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clock = <19200000>;
+			clocks = <&sys_ctrl HI6220_UART2_PCLK>,
+				 <&sys_ctrl HI6220_UART2_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: uart@f7113000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7113000 0x0 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clock = <19200000>;
+			clocks = <&sys_ctrl HI6220_UART3_PCLK>,
+				 <&sys_ctrl HI6220_UART3_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart4: uart@f7114000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7114000 0x0 0x1000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clock = <19200000>;
+			clocks = <&sys_ctrl HI6220_UART4_PCLK>,
+				 <&sys_ctrl HI6220_UART4_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/hihope-common.dtsi b/roms/u-boot/arch/arm/dts/hihope-common.dtsi
new file mode 100644
index 000000000..b1eb6a080
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hihope-common.dtsi
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		label = "rcar-sound";
+
+		dais = <&rsnd_port>;
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&du {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb1-reset {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "usb1-reset";
+	};
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint>;
+			};
+		};
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	status = "okay";
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/hihope-rev4.dtsi b/roms/u-boot/arch/arm/dts/hihope-rev4.dtsi
new file mode 100644
index 000000000..30e929997
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hihope-rev4.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x1801_clk: x1801-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x1801_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&pfc {
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/hihope-rzg2-ex.dtsi b/roms/u-boot/arch/arm/dts/hihope-rzg2-ex.dtsi
new file mode 100644
index 000000000..7745012d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hihope-rzg2-ex.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/hikey960-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/hikey960-pinctrl.dtsi
new file mode 100644
index 000000000..d11efc819
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/hikey960-pinctrl.dtsi
@@ -0,0 +1,1060 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * pinctrl dts fils for Hislicon HiKey960 development board
+ *
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+	soc {
+		/* [IOMG_000, IOMG_123] */
+		range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
+
+		pmx0: pinmux@e896c000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xe896c000 0x0 0x1f0>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <
+				&range 0 7 0
+				&range 8 116 0>;
+
+			pmu_pmx_func: pmu_pmx_func {
+				pinctrl-single,pins = <
+					0x008 MUX_M1 /* PMU1_SSI */
+					0x00c MUX_M1 /* PMU2_SSI */
+					0x010 MUX_M1 /* PMU_CLKOUT */
+					0x100 MUX_M1 /* PMU_HKADC_SSI */
+				>;
+			};
+
+			csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func {
+				pinctrl-single,pins = <
+					0x044 MUX_M0 /* CSI0_PWD_N */
+				>;
+			};
+
+			csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func {
+				pinctrl-single,pins = <
+					0x04c MUX_M0 /* CSI1_PWD_N */
+				>;
+			};
+
+			isp0_pmx_func: isp0_pmx_func {
+				pinctrl-single,pins = <
+					0x058 MUX_M1 /* ISP_CLK0 */
+					0x064 MUX_M1 /* ISP_SCL0 */
+					0x068 MUX_M1 /* ISP_SDA0 */
+				>;
+			};
+
+			isp1_pmx_func: isp1_pmx_func {
+				pinctrl-single,pins = <
+					0x05c MUX_M1 /* ISP_CLK1 */
+					0x06c MUX_M1 /* ISP_SCL1 */
+					0x070 MUX_M1 /* ISP_SDA1 */
+				>;
+			};
+
+			pwr_key_pmx_func: pwr_key_pmx_func {
+				pinctrl-single,pins = <
+					0x080 MUX_M0 /* GPIO_034 */
+				>;
+			};
+
+			i2c3_pmx_func: i2c3_pmx_func {
+				pinctrl-single,pins = <
+					0x02c MUX_M1 /* I2C3_SCL */
+					0x030 MUX_M1 /* I2C3_SDA */
+				>;
+			};
+
+			i2c4_pmx_func: i2c4_pmx_func {
+				pinctrl-single,pins = <
+					0x090 MUX_M1 /* I2C4_SCL */
+					0x094 MUX_M1 /* I2C4_SDA */
+				>;
+			};
+
+			pcie_perstn_pmx_func: pcie_perstn_pmx_func {
+				pinctrl-single,pins = <
+					0x15c MUX_M1 /* PCIE_PERST_N */
+				>;
+			};
+
+			usbhub5734_pmx_func: usbhub5734_pmx_func {
+				pinctrl-single,pins = <
+					0x11c MUX_M0 /* GPIO_073 */
+					0x120 MUX_M0 /* GPIO_074 */
+				>;
+			};
+
+			uart0_pmx_func: uart0_pmx_func {
+				pinctrl-single,pins = <
+					0x0cc MUX_M2 /* UART0_RXD */
+					0x0d0 MUX_M2 /* UART0_TXD */
+				>;
+			};
+
+			uart1_pmx_func: uart1_pmx_func {
+				pinctrl-single,pins = <
+					0x0b0 MUX_M2 /* UART1_CTS_N */
+					0x0b4 MUX_M2 /* UART1_RTS_N */
+					0x0a8 MUX_M2 /* UART1_RXD */
+					0x0ac MUX_M2 /* UART1_TXD */
+				>;
+			};
+
+			uart2_pmx_func: uart2_pmx_func {
+				pinctrl-single,pins = <
+					0x0bc MUX_M2 /* UART2_CTS_N */
+					0x0c0 MUX_M2 /* UART2_RTS_N */
+					0x0c8 MUX_M2 /* UART2_RXD */
+					0x0c4 MUX_M2 /* UART2_TXD */
+				>;
+			};
+
+			uart3_pmx_func: uart3_pmx_func {
+				pinctrl-single,pins = <
+					0x0dc MUX_M1 /* UART3_CTS_N */
+					0x0e0 MUX_M1 /* UART3_RTS_N */
+					0x0e4 MUX_M1 /* UART3_RXD */
+					0x0e8 MUX_M1 /* UART3_TXD */
+				>;
+			};
+
+			uart4_pmx_func: uart4_pmx_func {
+				pinctrl-single,pins = <
+					0x0ec MUX_M1 /* UART4_CTS_N */
+					0x0f0 MUX_M1 /* UART4_RTS_N */
+					0x0f4 MUX_M1 /* UART4_RXD */
+					0x0f8 MUX_M1 /* UART4_TXD */
+				>;
+			};
+
+			uart5_pmx_func: uart5_pmx_func {
+				pinctrl-single,pins = <
+					0x0c4 MUX_M3 /* UART5_CTS_N */
+					0x0c8 MUX_M3 /* UART5_RTS_N */
+					0x0bc MUX_M3 /* UART5_RXD */
+					0x0c0 MUX_M3 /* UART5_TXD */
+				>;
+			};
+
+			uart6_pmx_func: uart6_pmx_func {
+				pinctrl-single,pins = <
+					0x0cc MUX_M1 /* UART6_CTS_N */
+					0x0d0 MUX_M1 /* UART6_RTS_N */
+					0x0d4 MUX_M1 /* UART6_RXD */
+					0x0d8 MUX_M1 /* UART6_TXD */
+				>;
+			};
+
+			cam0_rst_pmx_func: cam0_rst_pmx_func {
+				pinctrl-single,pins = <
+					0x0c8 MUX_M0 /* CAM0_RST */
+				>;
+			};
+
+			cam1_rst_pmx_func: cam1_rst_pmx_func {
+				pinctrl-single,pins = <
+					0x124 MUX_M0 /* CAM1_RST */
+				>;
+			};
+		};
+
+		/* [IOMG_MMC0_000, IOMG_MMC0_005] */
+		pmx1: pinmux@ff37e000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff37e000 0x0 0x18>;
+			#gpio-range-cells = <0x3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 6 0>;
+
+			sd_pmx_func: sd_pmx_func {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SD_CLK */
+					0x004 MUX_M1 /* SD_CMD */
+					0x008 MUX_M1 /* SD_DATA0 */
+					0x00c MUX_M1 /* SD_DATA1 */
+					0x010 MUX_M1 /* SD_DATA2 */
+					0x014 MUX_M1 /* SD_DATA3 */
+				>;
+			};
+		};
+
+		/* [IOMG_FIX_000, IOMG_FIX_011] */
+		pmx2: pinmux@ff3b6000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff3b6000 0x0 0x30>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 12 0>;
+
+			ufs_pmx_func: ufs_pmx_func {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* UFS_REF_CLK */
+					0x004 MUX_M1 /* UFS_RST_N */
+				>;
+			};
+
+			spi3_pmx_func: spi3_pmx_func {
+				pinctrl-single,pins = <
+					0x008 MUX_M1 /* SPI3_CLK */
+					0x00c MUX_M1 /* SPI3_DI */
+					0x010 MUX_M1 /* SPI3_DO */
+					0x014 MUX_M1 /* SPI3_CS0_N */
+				>;
+			};
+		};
+
+		/* [IOMG_MMC1_000, IOMG_MMC1_005] */
+		pmx3: pinmux@ff3fd000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff3fd000 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 6 0>;
+
+			sdio_pmx_func: sdio_pmx_func {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SDIO_CLK */
+					0x004 MUX_M1 /* SDIO_CMD */
+					0x008 MUX_M1 /* SDIO_DATA0 */
+					0x00c MUX_M1 /* SDIO_DATA1 */
+					0x010 MUX_M1 /* SDIO_DATA2 */
+					0x014 MUX_M1 /* SDIO_DATA3 */
+				>;
+			};
+		};
+
+		/* [IOMG_AO_000, IOMG_AO_041] */
+		pmx4: pinmux@fff11000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xfff11000 0x0 0xa8>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base in node, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 42 0>;
+
+			i2s2_pmx_func: i2s2_pmx_func {
+				pinctrl-single,pins = <
+					0x044 MUX_M1 /* I2S2_DI */
+					0x048 MUX_M1 /* I2S2_DO */
+					0x04c MUX_M1 /* I2S2_XCLK */
+					0x050 MUX_M1 /* I2S2_XFS */
+				>;
+			};
+
+			slimbus_pmx_func: slimbus_pmx_func {
+				pinctrl-single,pins = <
+					0x02c MUX_M1 /* SLIMBUS_CLK */
+					0x030 MUX_M1 /* SLIMBUS_DATA */
+				>;
+			};
+
+			i2c0_pmx_func: i2c0_pmx_func {
+				pinctrl-single,pins = <
+					0x014 MUX_M1 /* I2C0_SCL */
+					0x018 MUX_M1 /* I2C0_SDA */
+				>;
+			};
+
+			i2c1_pmx_func: i2c1_pmx_func {
+				pinctrl-single,pins = <
+					0x01c MUX_M1 /* I2C1_SCL */
+					0x020 MUX_M1 /* I2C1_SDA */
+				>;
+			};
+
+			i2c7_pmx_func: i2c7_pmx_func {
+				pinctrl-single,pins = <
+					0x024 MUX_M3 /* I2C7_SCL */
+					0x028 MUX_M3 /* I2C7_SDA */
+				>;
+			};
+
+			pcie_pmx_func: pcie_pmx_func {
+				pinctrl-single,pins = <
+					0x084 MUX_M1 /* PCIE_CLKREQ_N */
+					0x088 MUX_M1 /* PCIE_WAKE_N */
+				>;
+			};
+
+			spi2_pmx_func: spi2_pmx_func {
+				pinctrl-single,pins = <
+					0x08c MUX_M1 /* SPI2_CLK */
+					0x090 MUX_M1 /* SPI2_DI */
+					0x094 MUX_M1 /* SPI2_DO */
+					0x098 MUX_M1 /* SPI2_CS0_N */
+				>;
+			};
+
+			i2s0_pmx_func: i2s0_pmx_func {
+				pinctrl-single,pins = <
+					0x034 MUX_M1 /* I2S0_DI */
+					0x038 MUX_M1 /* I2S0_DO */
+					0x03c MUX_M1 /* I2S0_XCLK */
+					0x040 MUX_M1 /* I2S0_XFS */
+				>;
+			};
+		};
+
+		pmx5: pinmux@e896c800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xe896c800 0x0 0x200>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			pmu_cfg_func: pmu_cfg_func {
+				pinctrl-single,pins = <
+					0x010 0x0 /* PMU1_SSI */
+					0x014 0x0 /* PMU2_SSI */
+					0x018 0x0 /* PMU_CLKOUT */
+					0x10c 0x0 /* PMU_HKADC_SSI */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			i2c3_cfg_func: i2c3_cfg_func {
+				pinctrl-single,pins = <
+					0x038 0x0 /* I2C3_SCL */
+					0x03c 0x0 /* I2C3_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func {
+				pinctrl-single,pins = <
+					0x050 0x0 /* CSI0_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func {
+				pinctrl-single,pins = <
+					0x058 0x0 /* CSI1_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			isp0_cfg_func: isp0_cfg_func {
+				pinctrl-single,pins = <
+					0x064 0x0 /* ISP_CLK0 */
+					0x070 0x0 /* ISP_SCL0 */
+					0x074 0x0 /* ISP_SDA0 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK>;
+			};
+
+			isp1_cfg_func: isp1_cfg_func {
+				pinctrl-single,pins = <
+					0x068 0x0 /* ISP_CLK1 */
+					0x078 0x0 /* ISP_SCL1 */
+					0x07c 0x0 /* ISP_SDA1 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			pwr_key_cfg_func: pwr_key_cfg_func {
+				pinctrl-single,pins = <
+					0x08c 0x0 /* GPIO_034 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart1_cfg_func: uart1_cfg_func {
+				pinctrl-single,pins = <
+					0x0b4 0x0 /* UART1_RXD */
+					0x0b8 0x0 /* UART1_TXD */
+					0x0bc 0x0 /* UART1_CTS_N */
+					0x0c0 0x0 /* UART1_RTS_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart2_cfg_func: uart2_cfg_func {
+				pinctrl-single,pins = <
+					0x0c8 0x0 /* UART2_CTS_N */
+					0x0cc 0x0 /* UART2_RTS_N */
+					0x0d0 0x0 /* UART2_TXD */
+					0x0d4 0x0 /* UART2_RXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart5_cfg_func: uart5_cfg_func {
+				pinctrl-single,pins = <
+					0x0c8 0x0 /* UART5_RXD */
+					0x0cc 0x0 /* UART5_TXD */
+					0x0d0 0x0 /* UART5_CTS_N */
+					0x0d4 0x0 /* UART5_RTS_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			cam0_rst_cfg_func: cam0_rst_cfg_func {
+				pinctrl-single,pins = <
+					0x0d4 0x0 /* CAM0_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart0_cfg_func: uart0_cfg_func {
+				pinctrl-single,pins = <
+					0x0d8 0x0 /* UART0_RXD */
+					0x0dc 0x0 /* UART0_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart6_cfg_func: uart6_cfg_func {
+				pinctrl-single,pins = <
+					0x0d8 0x0 /* UART6_CTS_N */
+					0x0dc 0x0 /* UART6_RTS_N */
+					0x0e0 0x0 /* UART6_RXD */
+					0x0e4 0x0 /* UART6_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart3_cfg_func: uart3_cfg_func {
+				pinctrl-single,pins = <
+					0x0e8 0x0 /* UART3_CTS_N */
+					0x0ec 0x0 /* UART3_RTS_N */
+					0x0f0 0x0 /* UART3_RXD */
+					0x0f4 0x0 /* UART3_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart4_cfg_func: uart4_cfg_func {
+				pinctrl-single,pins = <
+					0x0f8 0x0 /* UART4_CTS_N */
+					0x0fc 0x0 /* UART4_RTS_N */
+					0x100 0x0 /* UART4_RXD */
+					0x104 0x0 /* UART4_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			cam1_rst_cfg_func: cam1_rst_cfg_func {
+				pinctrl-single,pins = <
+					0x130 0x0 /* CAM1_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx6: pinmux@ff3b6800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff3b6800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			ufs_cfg_func: ufs_cfg_func {
+				pinctrl-single,pins = <
+					0x000 0x0 /* UFS_REF_CLK */
+					0x004 0x0 /* UFS_RST_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_08MA DRIVE6_MASK
+				>;
+			};
+
+			spi3_cfg_func: spi3_cfg_func {
+				pinctrl-single,pins = <
+					0x008 0x0 /* SPI3_CLK */
+					0x0 /* SPI3_DI */
+					0x010 0x0 /* SPI3_DO */
+					0x014 0x0 /* SPI3_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx7: pinmux@ff3fd800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff3fd800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sdio_clk_cfg_func: sdio_clk_cfg_func {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SDIO_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA DRIVE6_MASK
+				>;
+			};
+
+			sdio_cfg_func: sdio_cfg_func {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SDIO_CMD */
+					0x008 0x0 /* SDIO_DATA0 */
+					0x00c 0x0 /* SDIO_DATA1 */
+					0x010 0x0 /* SDIO_DATA2 */
+					0x014 0x0 /* SDIO_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx8: pinmux@ff37e800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff37e800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sd_clk_cfg_func: sd_clk_cfg_func {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SD_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA
+					DRIVE6_MASK
+				>;
+			};
+
+			sd_cfg_func: sd_cfg_func {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SD_CMD */
+					0x008 0x0 /* SD_DATA0 */
+					0x00c 0x0 /* SD_DATA1 */
+					0x010 0x0 /* SD_DATA2 */
+					0x014 0x0 /* SD_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA
+					DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx9: pinmux@fff11800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xfff11800 0x0 0xbc>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			i2c0_cfg_func: i2c0_cfg_func {
+				pinctrl-single,pins = <
+					0x01c 0x0 /* I2C0_SCL */
+					0x020 0x0 /* I2C0_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2c1_cfg_func: i2c1_cfg_func {
+				pinctrl-single,pins = <
+					0x024 0x0 /* I2C1_SCL */
+					0x028 0x0 /* I2C1_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2c7_cfg_func: i2c7_cfg_func {
+				pinctrl-single,pins = <
+					0x02c 0x0 /* I2C7_SCL */
+					0x030 0x0 /* I2C7_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			slimbus_cfg_func: slimbus_cfg_func {
+				pinctrl-single,pins = <
+					0x034 0x0 /* SLIMBUS_CLK */
+					0x038 0x0 /* SLIMBUS_DATA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2s0_cfg_func: i2s0_cfg_func {
+				pinctrl-single,pins = <
+					0x040 0x0 /* I2S0_DI */
+					0x044 0x0 /* I2S0_DO */
+					0x048 0x0 /* I2S0_XCLK */
+					0x04c 0x0 /* I2S0_XFS */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2s2_cfg_func: i2s2_cfg_func {
+				pinctrl-single,pins = <
+					0x050 0x0 /* I2S2_DI */
+					0x054 0x0 /* I2S2_DO */
+					0x058 0x0 /* I2S2_XCLK */
+					0x05c 0x0 /* I2S2_XFS */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			pcie_cfg_func: pcie_cfg_func {
+				pinctrl-single,pins = <
+					0x094 0x0 /* PCIE_CLKREQ_N */
+					0x098 0x0 /* PCIE_WAKE_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			spi2_cfg_func: spi2_cfg_func {
+				pinctrl-single,pins = <
+					0x09c 0x0 /* SPI2_CLK */
+					0x0a0 0x0 /* SPI2_DI */
+					0x0a4 0x0 /* SPI2_DO */
+					0x0a8 0x0 /* SPI2_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			usb_cfg_func: usb_cfg_func {
+				pinctrl-single,pins = <
+					0x0ac 0x0 /* GPIO_219 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx23-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx23-evk-u-boot.dtsi
new file mode 100644
index 000000000..165e220e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx23-evk-u-boot.dtsi
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "imx23-u-boot.dtsi"
+
diff --git a/roms/u-boot/arch/arm/dts/imx23-evk.dts b/roms/u-boot/arch/arm/dts/imx23-evk.dts
new file mode 100644
index 000000000..8cbaf1c81
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx23-evk.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Freescale i.MX23 Evaluation Kit";
+	compatible = "fsl,imx23-evk", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 18 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			nand-controller@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
+				status = "okay";
+			};
+
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a>;
+				status = "okay";
+
+				port {
+					display_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+		};
+	};
+
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx23-olinuxino-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx23-olinuxino-u-boot.dtsi
new file mode 100644
index 000000000..dee843369
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx23-olinuxino-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&ssp0 {
+	non-removable;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx23-olinuxino.dts b/roms/u-boot/arch/arm/dts/imx23-olinuxino.dts
new file mode 100644
index 000000000..0729e72f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx23-olinuxino.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx23.dtsi"
+
+/ {
+	model = "i.MX23 Olinuxino Low Cost Board";
+	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+				bus-width = <4>;
+				broken-cd;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_ALE__GPIO_0_17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pin_gpio2_1: led_gpio2_1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ssp1: spi@80034000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_b>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "host";
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+			gpio = <&gpio0 17 0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio2_1>;
+
+		user {
+			label = "green";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx23-pinfunc.h b/roms/u-boot/arch/arm/dts/imx23-pinfunc.h
new file mode 100644
index 000000000..5c0f32ca3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx23-pinfunc.h
@@ -0,0 +1,333 @@
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/roms/u-boot/arch/arm/dts/imx23-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx23-u-boot.dtsi
new file mode 100644
index 000000000..5e87aca61
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx23-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&gpio0 {
+	gpio-ranges = <&pinctrl 0 0 32>;
+};
+
+&gpio1 {
+	gpio-ranges = <&pinctrl 0 32 31>;
+};
+
+&gpio2 {
+	gpio-ranges = <&pinctrl 0 63 32>;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/imx23.dtsi b/roms/u-boot/arch/arm/dts/imx23.dtsi
new file mode 100644
index 000000000..4cfec7784
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx23.dtsi
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+#include "imx23-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		spi0 = &ssp0;
+		spi1 = &ssp1;
+		usbphy0 = &usbphy0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx23-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			dma_apbh: dma-apbh@80004000 {
+				compatible = "fsl,imx23-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <0 14 20 0
+					      13 13 13 13>;
+				interrupt-names = "empty", "ssp0", "ssp1", "empty",
+						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+				#dma-cells = <1>;
+				dma-channels = <8>;
+				clocks = <&clks 15>;
+			};
+
+			ecc@80008000 {
+				reg = <0x80008000 0x2000>;
+				status = "disabled";
+			};
+
+			nand-controller@8000c000 {
+				compatible = "fsl,imx23-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <56>;
+				interrupt-names = "bch";
+				clocks = <&clks 34>;
+				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: spi@80010000 {
+				reg = <0x80010000 0x2000>;
+				interrupts = <15>;
+				clocks = <&clks 33>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			etm@80014000 {
+				reg = <0x80014000 0x2000>;
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <0>;
+					interrupts = <16>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <1>;
+					interrupts = <17>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <2>;
+					interrupts = <18>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D14__AUART2_RX
+						MX23_PAD_GPMI_D15__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_fixup: gpmi-pins-fixup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_pins_fixup: mmc0-pins-fixup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_8bit_pins_a: mmc1-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_D04__SSP2_DATA4
+						MX23_PAD_GPMI_D05__SSP2_DATA5
+						MX23_PAD_GPMI_D06__SSP2_DATA6
+						MX23_PAD_GPMI_D07__SSP2_DATA7
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM2__PWM2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_a: i2c@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_b: i2c@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_ENABLE__I2C_SCL
+						MX23_PAD_LCD_HSYNC__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_c: i2c@2 {
+					reg = <2>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA1__I2C_SCL
+						MX23_PAD_SSP1_DATA2__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			digctl@8001c000 {
+				compatible = "fsl,imx23-digctl";
+				reg = <0x8001c000 2000>;
+				status = "disabled";
+			};
+
+			emi@80020000 {
+				reg = <0x80020000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx@80024000 {
+				compatible = "fsl,imx23-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <7 5 9 26
+					      19 0 25 23
+					      60 58 9 0
+					      0 0 0 0>;
+				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
+						  "saif0", "empty", "auart0-rx", "auart0-tx",
+						  "auart1-rx", "auart1-tx", "saif1", "empty",
+						  "empty", "empty", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 16>;
+			};
+
+			dcp: crypto@80028000 {
+				compatible = "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <53 54>;
+				status = "okay";
+			};
+
+			pxp@8002a000 {
+				reg = <0x8002a000 0x2000>;
+				status = "disabled";
+			};
+
+			efuse@8002c000 {
+				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8002c000 0x2000>;
+				clocks = <&clks 15>;
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif@80030000 {
+				compatible = "fsl,imx23-lcdif";
+				reg = <0x80030000 2000>;
+				interrupts = <46 45>;
+				clocks = <&clks 38>;
+				status = "disabled";
+			};
+
+			ssp1: spi@80034000 {
+				reg = <0x80034000 0x2000>;
+				interrupts = <2>;
+				clocks = <&clks 33>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			tvenc@80038000 {
+				reg = <0x80038000 0x2000>;
+				status = "disabled";
+			};
+		};
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif@80042000 {
+				reg = <0x80042000 0x2000>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power@80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				reg = <0x80046000 0x2000>;
+				dmas = <&dma_apbx 10>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			audio-out@80048000 {
+				reg = <0x80048000 0x2000>;
+				dmas = <&dma_apbx 1>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			audio-in@8004c000 {
+				reg = <0x8004c000 0x2000>;
+				dmas = <&dma_apbx 0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			lradc: lradc@80050000 {
+				compatible = "fsl,imx23-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <36 37 38 39 40 41 42 43 44>;
+				status = "disabled";
+				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
+			};
+
+			spdif@80054000 {
+				reg = <0x80054000 2000>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			i2c: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-i2c";
+				reg = <0x80058000 0x2000>;
+				interrupts = <27>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			rtc@8005c000 {
+				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x8005c000 0x2000>;
+				interrupts = <22>;
+			};
+
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 30>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <5>;
+				status = "disabled";
+			};
+
+			timrot@80068000 {
+				compatible = "fsl,imx23-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <28 29 30 31>;
+				clocks = <&clks 28>;
+			};
+
+			auart0: serial@8006c000 {
+				compatible = "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <24>;
+				clocks = <&clks 32>;
+				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			auart1: serial@8006e000 {
+				compatible = "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <59>;
+				clocks = <&clks 32>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			duart: serial@80070000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80070000 0x2000>;
+				interrupts = <0>;
+				clocks = <&clks 32>, <&clks 16>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 41>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb@80080000 {
+			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x40000>;
+			interrupts = <11>;
+			fsl,usbphy = <&usbphy0>;
+			clocks = <&clks 40>;
+			status = "disabled";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx28-pinfunc.h b/roms/u-boot/arch/arm/dts/imx28-pinfunc.h
new file mode 100644
index 000000000..e11f69ba0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx28-pinfunc.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/roms/u-boot/arch/arm/dts/imx28-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx28-u-boot.dtsi
new file mode 100644
index 000000000..9db72a6be
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx28-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+&gpio0 {
+	gpio-ranges = <&pinctrl 0 0 29>;
+};
+
+&gpio1 {
+	gpio-ranges = <&pinctrl 0 29 32>;
+};
+
+&gpio2 {
+	gpio-ranges = <&pinctrl 0 61 28>;
+};
+
+&gpio3 {
+	gpio-ranges = <&pinctrl 0 89 31>;
+};
+
+&gpio4 {
+	gpio-ranges = <&pinctrl 0 120 21>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx28-xea-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx28-xea-u-boot.dtsi
new file mode 100644
index 000000000..cc2ced5d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx28-xea-u-boot.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/*
+ * The minimal augmentation DTS U-Boot file to allow eMMC driver
+ * configuration in SPL for falcon boot.
+ */
+#include "imx28-u-boot.dtsi"
+/ {
+	apb@80000000 {
+		u-boot,dm-spl;
+
+		apbh@80000000 {
+			u-boot,dm-spl;
+		};
+
+		apbx@80040000 {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&clks {
+	u-boot,dm-spl;
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&pinctrl {
+	u-boot,dm-spl;
+};
+
+&ssp0 {
+	u-boot,dm-spl;
+};
+
+&ssp3 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx28-xea.dts b/roms/u-boot/arch/arm/dts/imx28-xea.dts
new file mode 100644
index 000000000..de049042f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx28-xea.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ *
+ */
+
+/dts-v1/;
+
+#include "imx28.dtsi"
+
+/ {
+	model = "Liebherr (LWE) XEA i.MX28 Board";
+	compatible = "lwe,xea", "fsl,imx28";
+
+	aliases {
+		spi3 = &ssp3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+
+	fixed-link {
+	      speed = <100>;
+	      full-duplex;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&ssp3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_b>;
+	status = "okay";
+	spi-max-frequency = <40000000>;
+	num-cs = <2>;
+
+	flash0: s25fl256s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "SPL (spi)";
+			reg = <0x0 0x10000>;
+			read-only;
+		};
+		partition@1 {
+			label = "u-boot (spi)";
+			reg = <0x10000 0x70000>;
+			read-only;
+		};
+		partition@2 {
+			label = "uboot-env (spi)";
+			reg = <0x80000 0x20000>;
+		};
+		partition@3 {
+			label = "kernel (spi)";
+			reg = <0x100000 0x400000>;
+		};
+		partition@4 {
+			label = "swupdate (spi)";
+			reg = <0x50000 0x800000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx28.dtsi b/roms/u-boot/arch/arm/dts/imx28.dtsi
new file mode 100644
index 000000000..e14d8ef01
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx28.dtsi
@@ -0,0 +1,1330 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		saif0 = &saif0;
+		saif1 = &saif1;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		serial2 = &auart2;
+		serial3 = &auart3;
+		serial4 = &auart4;
+		spi0 = &ssp1;
+		spi1 = &ssp2;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3c900>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx28-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			hsadc: hsadc@80002000 {
+				reg = <0x80002000 0x2000>;
+				interrupts = <13>;
+				dmas = <&dma_apbh 12>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dma_apbh: dma-apbh@80004000 {
+				compatible = "fsl,imx28-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <82 83 84 85
+					      88 88 88 88
+					      88 88 88 88
+					      87 86 0 0>;
+				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+						  "hsadc", "lcdif", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 25>;
+			};
+
+			perfmon: perfmon@80006000 {
+				reg = <0x80006000 0x800>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			gpmi: gpmi-nand@8000c000 {
+				compatible = "fsl,imx28-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <41>;
+				interrupt-names = "bch";
+				clocks = <&clks 50>;
+				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: spi@80010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80010000 0x2000>;
+				interrupts = <96>;
+				clocks = <&clks 46>;
+				dmas = <&dma_apbh 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp1: spi@80012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80012000 0x2000>;
+				interrupts = <97>;
+				clocks = <&clks 47>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp2: spi@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80014000 0x2000>;
+				interrupts = <98>;
+				clocks = <&clks 48>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp3: spi@80016000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80016000 0x2000>;
+				interrupts = <99>;
+				clocks = <&clks 49>;
+				dmas = <&dma_apbh 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <0>;
+					interrupts = <127>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <1>;
+					interrupts = <126>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <2>;
+					interrupts = <125>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@3 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <3>;
+					interrupts = <124>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@4 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <4>;
+					interrupts = <123>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_pins_b: duart@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_4pins_a: duart-4pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_status_cfg: gpmi-status-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_pins_a: auart1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_a: auart2-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_b: auart2-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_pins_a: auart2-pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+						MX28_PAD_AUART2_CTS__AUART2_CTS
+						MX28_PAD_AUART2_RTS__AUART2_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_pins_a: auart3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_a: auart3-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_b: auart3-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_a: auart4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_b: auart4@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__AUART4_RX
+						MX28_PAD_AUART0_RTS__AUART4_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_a: mac0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac0_pins_b: mac0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_RXD2__ENET0_RXD2
+						MX28_PAD_ENET0_RXD3__ENET0_RXD3
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET0_TXD2__ENET0_TXD2
+						MX28_PAD_ENET0_TXD3__ENET0_TXD3
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+						MX28_PAD_ENET0_COL__ENET0_COL
+						MX28_PAD_ENET0_CRS__ENET0_CRS
+						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+						>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac1_pins_a: mac1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_cd_cfg: mmc0-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__SSP1_D0
+						MX28_PAD_GPMI_D01__SSP1_D1
+						MX28_PAD_GPMI_D02__SSP1_D2
+						MX28_PAD_GPMI_D03__SSP1_D3
+						MX28_PAD_GPMI_RDY1__SSP1_CMD
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_cd_cfg: mmc1-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_sck_cfg: mmc1-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+
+				mmc2_4bit_pins_a: mmc2-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_4bit_pins_b: mmc2-4bit@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2c0_pins_a: i2c0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c0_pins_b: i2c0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_a: i2c1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_b: i2c1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_CTS__I2C1_SCL
+						MX28_PAD_AUART2_RTS__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_a: saif0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_b: saif0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif1_pins_a: saif1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				pwm0_pins_a: pwm0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__PWM_0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__PWM_2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_a: pwm3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM3__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_b: pwm3@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm4_pins_a: pwm4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM4__PWM_4
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_18bit_pins_a: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_16bit_pins_a: lcdif-16bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_sync_pins_a: lcdif-sync@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can0_pins_a: can0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can1_pins_a: can1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_a: spi3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi3_pins_b: spi3@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_pins_a: usb0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_pins_b: usb0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb1_pins_a: usb1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_id_pins_b: usb0id1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+			};
+
+			digctl: digctl@8001c000 {
+				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+				reg = <0x8001c000 0x2000>;
+				interrupts = <89>;
+				status = "disabled";
+			};
+
+			etm: etm@80022000 {
+				reg = <0x80022000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx@80024000 {
+				compatible = "fsl,imx28-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <78 79 66 0
+					      80 81 68 69
+					      70 71 72 73
+					      74 75 76 77>;
+				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
+						  "saif0", "saif1", "i2c0", "i2c1",
+						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 26>;
+			};
+
+			dcp: dcp@80028000 {
+				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <52 53 54>;
+				status = "okay";
+			};
+
+			pxp: pxp@8002a000 {
+				reg = <0x8002a000 0x2000>;
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@8002c000 {
+				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8002c000 0x2000>;
+				clocks = <&clks 25>;
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@80030000 {
+				compatible = "fsl,imx28-lcdif";
+				reg = <0x80030000 0x2000>;
+				interrupts = <38>;
+				clocks = <&clks 55>;
+				dmas = <&dma_apbh 13>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			can0: can@80032000 {
+				compatible = "fsl,imx28-flexcan";
+				reg = <0x80032000 0x2000>;
+				interrupts = <8>;
+				clocks = <&clks 58>, <&clks 58>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can1: can@80034000 {
+				compatible = "fsl,imx28-flexcan";
+				reg = <0x80034000 0x2000>;
+				interrupts = <9>;
+				clocks = <&clks 59>, <&clks 59>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			simdbg: simdbg@8003c000 {
+				reg = <0x8003c000 0x200>;
+				status = "disabled";
+			};
+
+			simgpmisel: simgpmisel@8003c200 {
+				reg = <0x8003c200 0x100>;
+				status = "disabled";
+			};
+
+			simsspsel: simsspsel@8003c300 {
+				reg = <0x8003c300 0x100>;
+				status = "disabled";
+			};
+
+			simmemsel: simmemsel@8003c400 {
+				reg = <0x8003c400 0x100>;
+				status = "disabled";
+			};
+
+			gpiomon: gpiomon@8003c500 {
+				reg = <0x8003c500 0x100>;
+				status = "disabled";
+			};
+
+			simenet: simenet@8003c700 {
+				reg = <0x8003c700 0x100>;
+				status = "disabled";
+			};
+
+			armjtag: armjtag@8003c800 {
+				reg = <0x8003c800 0x100>;
+				status = "disabled";
+			};
+		};
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif@80042000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx28-saif";
+				reg = <0x80042000 0x2000>;
+				interrupts = <59>;
+				#clock-cells = <0>;
+				clocks = <&clks 53>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power: power@80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx28-saif";
+				reg = <0x80046000 0x2000>;
+				interrupts = <58>;
+				clocks = <&clks 54>;
+				dmas = <&dma_apbx 5>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			lradc: lradc@80050000 {
+				compatible = "fsl,imx28-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <10 14 15 16 17 18 19
+						20 21 22 23 24 25>;
+				status = "disabled";
+				clocks = <&clks 41>;
+				#io-channel-cells = <1>;
+			};
+
+			spdif: spdif@80054000 {
+				reg = <0x80054000 0x2000>;
+				interrupts = <45>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			mxs_rtc: rtc@80056000 {
+				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x80056000 0x2000>;
+				interrupts = <29>;
+			};
+
+			i2c0: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x80058000 0x2000>;
+				interrupts = <111>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@8005a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x8005a000 0x2000>;
+				interrupts = <110>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 44>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <8>;
+				status = "disabled";
+			};
+
+			timer: timrot@80068000 {
+				compatible = "fsl,imx28-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
+			};
+
+			auart0: serial@8006a000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006a000 0x2000>;
+				interrupts = <112>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart1: serial@8006c000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <113>;
+				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart2: serial@8006e000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <114>;
+				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart3: serial@80070000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80070000 0x2000>;
+				interrupts = <115>;
+				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart4: serial@80072000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80072000 0x2000>;
+				interrupts = <116>;
+				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			duart: serial@80074000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80074000 0x1000>;
+				interrupts = <47>;
+				clocks = <&clks 45>, <&clks 26>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 62>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007e000 0x2000>;
+				clocks = <&clks 63>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb@80080000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x10000>;
+			interrupts = <93>;
+			clocks = <&clks 60>;
+			fsl,usbphy = <&usbphy0>;
+			status = "disabled";
+		};
+
+		usb1: usb@80090000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80090000 0x10000>;
+			interrupts = <92>;
+			clocks = <&clks 61>;
+			fsl,usbphy = <&usbphy1>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		dflpt: dflpt@800c0000 {
+			reg = <0x800c0000 0x10000>;
+			status = "disabled";
+		};
+
+		mac0: ethernet@800f0000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f0000 0x4000>;
+			interrupts = <101>;
+			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+			clock-names = "ipg", "ahb", "enet_out";
+			status = "disabled";
+		};
+
+		mac1: ethernet@800f4000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f4000 0x4000>;
+			interrupts = <102>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
+			status = "disabled";
+		};
+
+		etn_switch: switch@800f8000 {
+			reg = <0x800f8000 0x8000>;
+			status = "disabled";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx51-babbage.dts b/roms/u-boot/arch/arm/dts/imx51-babbage.dts
new file mode 100644
index 000000000..552196d8a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx51-babbage.dts
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Freescale i.MX51 Babbage Board";
+	compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	ckih1 {
+		clock-frequency = <22579200>;
+	};
+
+	clk_osc: clk-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_osc_gate: clk-osc-gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
+		clocks = <&clk_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_audio: clk-audio {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_usb: clk-usb {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		port@0 {
+		reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+
+	display2: disp2 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp2>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp2>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-diagnostic {
+			label = "diagnostic";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_hub_reset: regulator@0 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotgreg>;
+			reg = <0>;
+			regulator-name = "hub_reset";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx51-babbage-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx51-babbage-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1reg>;
+		clocks = <&clk_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-boot-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_audio>;
+		VDDA-supply = <&vdig_reg>;
+		VDDIO-supply = <&vvideo_reg>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp2 {
+	remote-endpoint = <&display1_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 3, KEY_HOME)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+		MATRIX_KEY(3, 0, KEY_F1)
+		MATRIX_KEY(3, 1, KEY_F2)
+		MATRIX_KEY(3, 2, KEY_F3)
+		MATRIX_KEY(3, 3, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_hub_reset>;
+	fsl,usbphy = <&usbphy1>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "otg";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-babbage {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+			>;
+		};
+
+		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+			>;
+		};
+
+		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
+			fsl,pins = <
+				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+			>;
+		};
+
+		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D17__GPIO2_1		0x85
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+				MX51_PAD_GPIO1_0__GPIO1_0		0x100
+				MX51_PAD_GPIO1_1__GPIO1_1		0x100
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
+				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
+				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
+				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
+				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
+				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
+				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
+				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
+				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
+				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
+				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
+				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
+				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_A27__GPIO2_21		0x5
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
+				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			>;
+		};
+
+		pinctrl_ipu_disp2: ipudisp2grp {
+			fsl,pins = <
+				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
+				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
+				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
+				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
+				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
+				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
+				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
+				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
+				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
+				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
+				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
+				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
+				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
+				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
+				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
+				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
+				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
+				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
+				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+				MX51_PAD_DI_GP4__DI2_PIN15		0x5
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
+				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
+				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
+				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
+				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
+				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
+				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
+				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
+				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
+				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
+				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
+			>;
+		};
+
+		pinctrl_usbh1reg: usbh1reggrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D21__GPIO2_5		0x85
+			>;
+		};
+
+		pinctrl_usbotgreg: usbotgreggrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_7__GPIO1_7		0x85
+			>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx51-pinfunc.h b/roms/u-boot/arch/arm/dts/imx51-pinfunc.h
new file mode 100644
index 000000000..910e0ec50
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx51-pinfunc.h
@@ -0,0 +1,768 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX51_PINFUNC_H
+#define __DTS_IMX51_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX51_PAD_EIM_D16__AUD4_RXFS			0x05c 0x3f0 0x000 0x5 0x0
+#define MX51_PAD_EIM_D16__AUD5_TXD			0x05c 0x3f0 0x8d8 0x7 0x0
+#define MX51_PAD_EIM_D16__EIM_D16			0x05c 0x3f0 0x000 0x0 0x0
+#define MX51_PAD_EIM_D16__GPIO2_0			0x05c 0x3f0 0x000 0x1 0x0
+#define MX51_PAD_EIM_D16__I2C1_SDA			0x05c 0x3f0 0x9b4 0x4 0x0
+#define MX51_PAD_EIM_D16__UART2_CTS			0x05c 0x3f0 0x000 0x3 0x0
+#define MX51_PAD_EIM_D16__USBH2_DATA0			0x05c 0x3f0 0x000 0x2 0x0
+#define MX51_PAD_EIM_D17__AUD5_RXD			0x060 0x3f4 0x8d4 0x7 0x0
+#define MX51_PAD_EIM_D17__EIM_D17			0x060 0x3f4 0x000 0x0 0x0
+#define MX51_PAD_EIM_D17__GPIO2_1			0x060 0x3f4 0x000 0x1 0x0
+#define MX51_PAD_EIM_D17__UART2_RXD			0x060 0x3f4 0x9ec 0x3 0x0
+#define MX51_PAD_EIM_D17__UART3_CTS			0x060 0x3f4 0x000 0x4 0x0
+#define MX51_PAD_EIM_D17__USBH2_DATA1			0x060 0x3f4 0x000 0x2 0x0
+#define MX51_PAD_EIM_D18__AUD5_TXC			0x064 0x3f8 0x8e4 0x7 0x0
+#define MX51_PAD_EIM_D18__EIM_D18			0x064 0x3f8 0x000 0x0 0x0
+#define MX51_PAD_EIM_D18__GPIO2_2			0x064 0x3f8 0x000 0x1 0x0
+#define MX51_PAD_EIM_D18__UART2_TXD			0x064 0x3f8 0x000 0x3 0x0
+#define MX51_PAD_EIM_D18__UART3_RTS			0x064 0x3f8 0x9f0 0x4 0x1
+#define MX51_PAD_EIM_D18__USBH2_DATA2			0x064 0x3f8 0x000 0x2 0x0
+#define MX51_PAD_EIM_D19__AUD4_RXC			0x068 0x3fc 0x000 0x5 0x0
+#define MX51_PAD_EIM_D19__AUD5_TXFS			0x068 0x3fc 0x8e8 0x7 0x0
+#define MX51_PAD_EIM_D19__EIM_D19			0x068 0x3fc 0x000 0x0 0x0
+#define MX51_PAD_EIM_D19__GPIO2_3			0x068 0x3fc 0x000 0x1 0x0
+#define MX51_PAD_EIM_D19__I2C1_SCL			0x068 0x3fc 0x9b0 0x4 0x0
+#define MX51_PAD_EIM_D19__UART2_RTS			0x068 0x3fc 0x9e8 0x3 0x1
+#define MX51_PAD_EIM_D19__USBH2_DATA3			0x068 0x3fc 0x000 0x2 0x0
+#define MX51_PAD_EIM_D20__AUD4_TXD			0x06c 0x400 0x8c8 0x5 0x0
+#define MX51_PAD_EIM_D20__EIM_D20			0x06c 0x400 0x000 0x0 0x0
+#define MX51_PAD_EIM_D20__GPIO2_4			0x06c 0x400 0x000 0x1 0x0
+#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB		0x06c 0x400 0x000 0x4 0x0
+#define MX51_PAD_EIM_D20__USBH2_DATA4			0x06c 0x400 0x000 0x2 0x0
+#define MX51_PAD_EIM_D21__AUD4_RXD			0x070 0x404 0x8c4 0x5 0x0
+#define MX51_PAD_EIM_D21__EIM_D21			0x070 0x404 0x000 0x0 0x0
+#define MX51_PAD_EIM_D21__GPIO2_5			0x070 0x404 0x000 0x1 0x0
+#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB		0x070 0x404 0x000 0x3 0x0
+#define MX51_PAD_EIM_D21__USBH2_DATA5			0x070 0x404 0x000 0x2 0x0
+#define MX51_PAD_EIM_D22__AUD4_TXC			0x074 0x408 0x8cc 0x5 0x0
+#define MX51_PAD_EIM_D22__EIM_D22			0x074 0x408 0x000 0x0 0x0
+#define MX51_PAD_EIM_D22__GPIO2_6			0x074 0x408 0x000 0x1 0x0
+#define MX51_PAD_EIM_D22__USBH2_DATA6			0x074 0x408 0x000 0x2 0x0
+#define MX51_PAD_EIM_D23__AUD4_TXFS			0x078 0x40c 0x8d0 0x5 0x0
+#define MX51_PAD_EIM_D23__EIM_D23			0x078 0x40c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D23__GPIO2_7			0x078 0x40c 0x000 0x1 0x0
+#define MX51_PAD_EIM_D23__SPDIF_OUT1			0x078 0x40c 0x000 0x4 0x0
+#define MX51_PAD_EIM_D23__USBH2_DATA7			0x078 0x40c 0x000 0x2 0x0
+#define MX51_PAD_EIM_D24__AUD6_RXFS			0x07c 0x410 0x8f8 0x5 0x0
+#define MX51_PAD_EIM_D24__EIM_D24			0x07c 0x410 0x000 0x0 0x0
+#define MX51_PAD_EIM_D24__GPIO2_8			0x07c 0x410 0x000 0x1 0x0
+#define MX51_PAD_EIM_D24__I2C2_SDA			0x07c 0x410 0x9bc 0x4 0x0
+#define MX51_PAD_EIM_D24__UART3_CTS			0x07c 0x410 0x000 0x3 0x0
+#define MX51_PAD_EIM_D24__USBOTG_DATA0			0x07c 0x410 0x000 0x2 0x0
+#define MX51_PAD_EIM_D25__EIM_D25			0x080 0x414 0x000 0x0 0x0
+#define MX51_PAD_EIM_D25__KEY_COL6			0x080 0x414 0x9c8 0x1 0x0
+#define MX51_PAD_EIM_D25__UART2_CTS			0x080 0x414 0x000 0x4 0x0
+#define MX51_PAD_EIM_D25__UART3_RXD			0x080 0x414 0x9f4 0x3 0x0
+#define MX51_PAD_EIM_D25__USBOTG_DATA1			0x080 0x414 0x000 0x2 0x0
+#define MX51_PAD_EIM_D26__EIM_D26			0x084 0x418 0x000 0x0 0x0
+#define MX51_PAD_EIM_D26__KEY_COL7			0x084 0x418 0x9cc 0x1 0x0
+#define MX51_PAD_EIM_D26__UART2_RTS			0x084 0x418 0x9e8 0x4 0x3
+#define MX51_PAD_EIM_D26__UART3_TXD			0x084 0x418 0x000 0x3 0x0
+#define MX51_PAD_EIM_D26__USBOTG_DATA2			0x084 0x418 0x000 0x2 0x0
+#define MX51_PAD_EIM_D27__AUD6_RXC			0x088 0x41c 0x8f4 0x5 0x0
+#define MX51_PAD_EIM_D27__EIM_D27			0x088 0x41c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D27__GPIO2_9			0x088 0x41c 0x000 0x1 0x0
+#define MX51_PAD_EIM_D27__I2C2_SCL			0x088 0x41c 0x9b8 0x4 0x0
+#define MX51_PAD_EIM_D27__UART3_RTS			0x088 0x41c 0x9f0 0x3 0x3
+#define MX51_PAD_EIM_D27__USBOTG_DATA3			0x088 0x41c 0x000 0x2 0x0
+#define MX51_PAD_EIM_D28__AUD6_TXD			0x08c 0x420 0x8f0 0x5 0x0
+#define MX51_PAD_EIM_D28__EIM_D28			0x08c 0x420 0x000 0x0 0x0
+#define MX51_PAD_EIM_D28__KEY_ROW4			0x08c 0x420 0x9d0 0x1 0x0
+#define MX51_PAD_EIM_D28__USBOTG_DATA4			0x08c 0x420 0x000 0x2 0x0
+#define MX51_PAD_EIM_D29__AUD6_RXD			0x090 0x424 0x8ec 0x5 0x0
+#define MX51_PAD_EIM_D29__EIM_D29			0x090 0x424 0x000 0x0 0x0
+#define MX51_PAD_EIM_D29__KEY_ROW5			0x090 0x424 0x9d4 0x1 0x0
+#define MX51_PAD_EIM_D29__USBOTG_DATA5			0x090 0x424 0x000 0x2 0x0
+#define MX51_PAD_EIM_D30__AUD6_TXC			0x094 0x428 0x8fc 0x5 0x0
+#define MX51_PAD_EIM_D30__EIM_D30			0x094 0x428 0x000 0x0 0x0
+#define MX51_PAD_EIM_D30__KEY_ROW6			0x094 0x428 0x9d8 0x1 0x0
+#define MX51_PAD_EIM_D30__USBOTG_DATA6			0x094 0x428 0x000 0x2 0x0
+#define MX51_PAD_EIM_D31__AUD6_TXFS			0x098 0x42c 0x900 0x5 0x0
+#define MX51_PAD_EIM_D31__EIM_D31			0x098 0x42c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D31__KEY_ROW7			0x098 0x42c 0x9dc 0x1 0x0
+#define MX51_PAD_EIM_D31__USBOTG_DATA7			0x098 0x42c 0x000 0x2 0x0
+#define MX51_PAD_EIM_A16__EIM_A16			0x09c 0x430 0x000 0x0 0x0
+#define MX51_PAD_EIM_A16__GPIO2_10			0x09c 0x430 0x000 0x1 0x0
+#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0			0x09c 0x430 0x000 0x7 0x0
+#define MX51_PAD_EIM_A17__EIM_A17			0x0a0 0x434 0x000 0x0 0x0
+#define MX51_PAD_EIM_A17__GPIO2_11			0x0a0 0x434 0x000 0x1 0x0
+#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1			0x0a0 0x434 0x000 0x7 0x0
+#define MX51_PAD_EIM_A18__BOOT_LPB0			0x0a4 0x438 0x000 0x7 0x0
+#define MX51_PAD_EIM_A18__EIM_A18			0x0a4 0x438 0x000 0x0 0x0
+#define MX51_PAD_EIM_A18__GPIO2_12			0x0a4 0x438 0x000 0x1 0x0
+#define MX51_PAD_EIM_A19__BOOT_LPB1			0x0a8 0x43c 0x000 0x7 0x0
+#define MX51_PAD_EIM_A19__EIM_A19			0x0a8 0x43c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A19__GPIO2_13			0x0a8 0x43c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A20__BOOT_UART_SRC0		0x0ac 0x440 0x000 0x7 0x0
+#define MX51_PAD_EIM_A20__EIM_A20			0x0ac 0x440 0x000 0x0 0x0
+#define MX51_PAD_EIM_A20__GPIO2_14			0x0ac 0x440 0x000 0x1 0x0
+#define MX51_PAD_EIM_A21__BOOT_UART_SRC1		0x0b0 0x444 0x000 0x7 0x0
+#define MX51_PAD_EIM_A21__EIM_A21			0x0b0 0x444 0x000 0x0 0x0
+#define MX51_PAD_EIM_A21__GPIO2_15			0x0b0 0x444 0x000 0x1 0x0
+#define MX51_PAD_EIM_A22__EIM_A22			0x0b4 0x448 0x000 0x0 0x0
+#define MX51_PAD_EIM_A22__GPIO2_16			0x0b4 0x448 0x000 0x1 0x0
+#define MX51_PAD_EIM_A23__BOOT_HPN_EN			0x0b8 0x44c 0x000 0x7 0x0
+#define MX51_PAD_EIM_A23__EIM_A23			0x0b8 0x44c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A23__GPIO2_17			0x0b8 0x44c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A24__EIM_A24			0x0bc 0x450 0x000 0x0 0x0
+#define MX51_PAD_EIM_A24__GPIO2_18			0x0bc 0x450 0x000 0x1 0x0
+#define MX51_PAD_EIM_A24__USBH2_CLK			0x0bc 0x450 0x000 0x2 0x0
+#define MX51_PAD_EIM_A25__DISP1_PIN4			0x0c0 0x454 0x000 0x6 0x0
+#define MX51_PAD_EIM_A25__EIM_A25			0x0c0 0x454 0x000 0x0 0x0
+#define MX51_PAD_EIM_A25__GPIO2_19			0x0c0 0x454 0x000 0x1 0x0
+#define MX51_PAD_EIM_A25__USBH2_DIR			0x0c0 0x454 0x000 0x2 0x0
+#define MX51_PAD_EIM_A26__CSI1_DATA_EN			0x0c4 0x458 0x9a0 0x5 0x0
+#define MX51_PAD_EIM_A26__DISP2_EXT_CLK			0x0c4 0x458 0x908 0x6 0x0
+#define MX51_PAD_EIM_A26__EIM_A26			0x0c4 0x458 0x000 0x0 0x0
+#define MX51_PAD_EIM_A26__GPIO2_20			0x0c4 0x458 0x000 0x1 0x0
+#define MX51_PAD_EIM_A26__USBH2_STP			0x0c4 0x458 0x000 0x2 0x0
+#define MX51_PAD_EIM_A27__CSI2_DATA_EN			0x0c8 0x45c 0x99c 0x5 0x0
+#define MX51_PAD_EIM_A27__DISP1_PIN1			0x0c8 0x45c 0x9a4 0x6 0x0
+#define MX51_PAD_EIM_A27__EIM_A27			0x0c8 0x45c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A27__GPIO2_21			0x0c8 0x45c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A27__USBH2_NXT			0x0c8 0x45c 0x000 0x2 0x0
+#define MX51_PAD_EIM_EB0__EIM_EB0			0x0cc 0x460 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB1__EIM_EB1			0x0d0 0x464 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB2__AUD5_RXFS			0x0d4 0x468 0x8e0 0x6 0x0
+#define MX51_PAD_EIM_EB2__CSI1_D2			0x0d4 0x468 0x000 0x5 0x0
+#define MX51_PAD_EIM_EB2__EIM_EB2			0x0d4 0x468 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB2__FEC_MDIO			0x0d4 0x468 0x954 0x3 0x0
+#define MX51_PAD_EIM_EB2__GPIO2_22			0x0d4 0x468 0x000 0x1 0x0
+#define MX51_PAD_EIM_EB2__GPT_CMPOUT1			0x0d4 0x468 0x000 0x7 0x0
+#define MX51_PAD_EIM_EB3__AUD5_RXC			0x0d8 0x46c 0x8dc 0x6 0x0
+#define MX51_PAD_EIM_EB3__CSI1_D3			0x0d8 0x46c 0x000 0x5 0x0
+#define MX51_PAD_EIM_EB3__EIM_EB3			0x0d8 0x46c 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB3__FEC_RDATA1			0x0d8 0x46c 0x95c 0x3 0x0
+#define MX51_PAD_EIM_EB3__GPIO2_23			0x0d8 0x46c 0x000 0x1 0x0
+#define MX51_PAD_EIM_EB3__GPT_CMPOUT2			0x0d8 0x46c 0x000 0x7 0x0
+#define MX51_PAD_EIM_OE__EIM_OE				0x0dc 0x470 0x000 0x0 0x0
+#define MX51_PAD_EIM_OE__GPIO2_24			0x0dc 0x470 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS0__EIM_CS0			0x0e0 0x474 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS0__GPIO2_25			0x0e0 0x474 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS1__EIM_CS1			0x0e4 0x478 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS1__GPIO2_26			0x0e4 0x478 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS2__AUD5_TXD			0x0e8 0x47c 0x8d8 0x6 0x1
+#define MX51_PAD_EIM_CS2__CSI1_D4			0x0e8 0x47c 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS2__EIM_CS2			0x0e8 0x47c 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS2__FEC_RDATA2			0x0e8 0x47c 0x960 0x3 0x0
+#define MX51_PAD_EIM_CS2__GPIO2_27			0x0e8 0x47c 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS2__USBOTG_STP			0x0e8 0x47c 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS3__AUD5_RXD			0x0ec 0x480 0x8d4 0x6 0x1
+#define MX51_PAD_EIM_CS3__CSI1_D5			0x0ec 0x480 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS3__EIM_CS3			0x0ec 0x480 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS3__FEC_RDATA3			0x0ec 0x480 0x964 0x3 0x0
+#define MX51_PAD_EIM_CS3__GPIO2_28			0x0ec 0x480 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS3__USBOTG_NXT			0x0ec 0x480 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS4__AUD5_TXC			0x0f0 0x484 0x8e4 0x6 0x1
+#define MX51_PAD_EIM_CS4__CSI1_D6			0x0f0 0x484 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS4__EIM_CS4			0x0f0 0x484 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS4__FEC_RX_ER			0x0f0 0x484 0x970 0x3 0x0
+#define MX51_PAD_EIM_CS4__GPIO2_29			0x0f0 0x484 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS4__USBOTG_CLK			0x0f0 0x484 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS5__AUD5_TXFS			0x0f4 0x488 0x8e8 0x6 0x1
+#define MX51_PAD_EIM_CS5__CSI1_D7			0x0f4 0x488 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK			0x0f4 0x488 0x904 0x4 0x0
+#define MX51_PAD_EIM_CS5__EIM_CS5			0x0f4 0x488 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS5__FEC_CRS			0x0f4 0x488 0x950 0x3 0x0
+#define MX51_PAD_EIM_CS5__GPIO2_30			0x0f4 0x488 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS5__USBOTG_DIR			0x0f4 0x488 0x000 0x2 0x0
+#define MX51_PAD_EIM_DTACK__EIM_DTACK			0x0f8 0x48c 0x000 0x0 0x0
+#define MX51_PAD_EIM_DTACK__GPIO2_31			0x0f8 0x48c 0x000 0x1 0x0
+#define MX51_PAD_EIM_LBA__EIM_LBA			0x0fc 0x494 0x000 0x0 0x0
+#define MX51_PAD_EIM_LBA__GPIO3_1			0x0fc 0x494 0x978 0x1 0x0
+#define MX51_PAD_EIM_CRE__EIM_CRE			0x100 0x4a0 0x000 0x0 0x0
+#define MX51_PAD_EIM_CRE__GPIO3_2			0x100 0x4a0 0x97c 0x1 0x0
+#define MX51_PAD_DRAM_CS1__DRAM_CS1			0x104 0x4d0 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WE_B__GPIO3_3			0x108 0x4e4 0x980 0x3 0x0
+#define MX51_PAD_NANDF_WE_B__NANDF_WE_B			0x108 0x4e4 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WE_B__PATA_DIOW			0x108 0x4e4 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WE_B__SD3_DATA0			0x108 0x4e4 0x93c 0x2 0x0
+#define MX51_PAD_NANDF_RE_B__GPIO3_4			0x10c 0x4e8 0x984 0x3 0x0
+#define MX51_PAD_NANDF_RE_B__NANDF_RE_B			0x10c 0x4e8 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RE_B__PATA_DIOR			0x10c 0x4e8 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RE_B__SD3_DATA1			0x10c 0x4e8 0x940 0x2 0x0
+#define MX51_PAD_NANDF_ALE__GPIO3_5			0x110 0x4ec 0x988 0x3 0x0
+#define MX51_PAD_NANDF_ALE__NANDF_ALE			0x110 0x4ec 0x000 0x0 0x0
+#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN		0x110 0x4ec 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CLE__GPIO3_6			0x114 0x4f0 0x98c 0x3 0x0
+#define MX51_PAD_NANDF_CLE__NANDF_CLE			0x114 0x4f0 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CLE__PATA_RESET_B		0x114 0x4f0 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WP_B__GPIO3_7			0x118 0x4f4 0x990 0x3 0x0
+#define MX51_PAD_NANDF_WP_B__NANDF_WP_B			0x118 0x4f4 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WP_B__PATA_DMACK			0x118 0x4f4 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WP_B__SD3_DATA2			0x118 0x4f4 0x944 0x2 0x0
+#define MX51_PAD_NANDF_RB0__ECSPI2_SS1			0x11c 0x4f8 0x930 0x5 0x0
+#define MX51_PAD_NANDF_RB0__GPIO3_8			0x11c 0x4f8 0x994 0x3 0x0
+#define MX51_PAD_NANDF_RB0__NANDF_RB0			0x11c 0x4f8 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB0__PATA_DMARQ			0x11c 0x4f8 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RB0__SD3_DATA3			0x11c 0x4f8 0x948 0x2 0x0
+#define MX51_PAD_NANDF_RB1__CSPI_MOSI			0x120 0x4fc 0x91c 0x6 0x0
+#define MX51_PAD_NANDF_RB1__ECSPI2_RDY			0x120 0x4fc 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB1__GPIO3_9			0x120 0x4fc 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB1__NANDF_RB1			0x120 0x4fc 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB1__PATA_IORDY			0x120 0x4fc 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RB1__SD4_CMD			0x120 0x4fc 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RB2__DISP2_WAIT			0x124 0x500 0x9a8 0x5 0x0
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK			0x124 0x500 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB2__FEC_COL			0x124 0x500 0x94c 0x1 0x0
+#define MX51_PAD_NANDF_RB2__GPIO3_10			0x124 0x500 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB2__NANDF_RB2			0x124 0x500 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP			0x124 0x500 0x000 0x7 0x0
+#define MX51_PAD_NANDF_RB2__USBH3_NXT			0x124 0x500 0xa20 0x6 0x0
+#define MX51_PAD_NANDF_RB3__DISP1_WAIT			0x128 0x504 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO			0x128 0x504 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB3__FEC_RX_CLK			0x128 0x504 0x968 0x1 0x0
+#define MX51_PAD_NANDF_RB3__GPIO3_11			0x128 0x504 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB3__NANDF_RB3			0x128 0x504 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB3__USBH3_CLK			0x128 0x504 0x9f8 0x6 0x0
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM			0x128 0x504 0x000 0x7 0x0
+#define MX51_PAD_GPIO_NAND__GPIO_NAND			0x12c 0x514 0x998 0x0 0x0
+#define MX51_PAD_GPIO_NAND__PATA_INTRQ			0x12c 0x514 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS0__GPIO3_16			0x130 0x518 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS0__NANDF_CS0			0x130 0x518 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS1__GPIO3_17			0x134 0x51c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS1__NANDF_CS1			0x134 0x51c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS2__CSPI_SCLK			0x138 0x520 0x914 0x6 0x0
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER			0x138 0x520 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS2__GPIO3_18			0x138 0x520 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS2__NANDF_CS2			0x138 0x520 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS2__PATA_CS_0			0x138 0x520 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS2__SD4_CLK			0x138 0x520 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP			0x138 0x520 0x000 0x7 0x0
+#define MX51_PAD_NANDF_CS3__FEC_MDC			0x13c 0x524 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS3__GPIO3_19			0x13c 0x524 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS3__NANDF_CS3			0x13c 0x524 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS3__PATA_CS_1			0x13c 0x524 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS3__SD4_DAT0			0x13c 0x524 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM			0x13c 0x524 0x000 0x7 0x0
+#define MX51_PAD_NANDF_CS4__FEC_TDATA1			0x140 0x528 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS4__GPIO3_20			0x140 0x528 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS4__NANDF_CS4			0x140 0x528 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS4__PATA_DA_0			0x140 0x528 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS4__SD4_DAT1			0x140 0x528 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS4__USBH3_STP			0x140 0x528 0xa24 0x7 0x0
+#define MX51_PAD_NANDF_CS5__FEC_TDATA2			0x144 0x52c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS5__GPIO3_21			0x144 0x52c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS5__NANDF_CS5			0x144 0x52c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS5__PATA_DA_1			0x144 0x52c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS5__SD4_DAT2			0x144 0x52c 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS5__USBH3_DIR			0x144 0x52c 0xa1c 0x7 0x0
+#define MX51_PAD_NANDF_CS6__CSPI_SS3			0x148 0x530 0x928 0x7 0x0
+#define MX51_PAD_NANDF_CS6__FEC_TDATA3			0x148 0x530 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS6__GPIO3_22			0x148 0x530 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS6__NANDF_CS6			0x148 0x530 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS6__PATA_DA_2			0x148 0x530 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS6__SD4_DAT3			0x148 0x530 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN			0x14c 0x534 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS7__GPIO3_23			0x14c 0x534 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS7__NANDF_CS7			0x14c 0x534 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS7__SD3_CLK			0x14c 0x534 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0		0x150 0x538 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		0x150 0x538 0x974 0x1 0x0
+#define MX51_PAD_NANDF_RDY_INT__GPIO3_24		0x150 0x538 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		0x150 0x538 0x938 0x0 0x0
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD			0x150 0x538 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI			0x154 0x53c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D15__GPIO3_25			0x154 0x53c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D15__NANDF_D15			0x154 0x53c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D15__PATA_DATA15			0x154 0x53c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D15__SD3_DAT7			0x154 0x53c 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D14__ECSPI2_SS3			0x158 0x540 0x934 0x2 0x0
+#define MX51_PAD_NANDF_D14__GPIO3_26			0x158 0x540 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D14__NANDF_D14			0x158 0x540 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D14__PATA_DATA14			0x158 0x540 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D14__SD3_DAT6			0x158 0x540 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D13__ECSPI2_SS2			0x15c 0x544 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D13__GPIO3_27			0x15c 0x544 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D13__NANDF_D13			0x15c 0x544 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D13__PATA_DATA13			0x15c 0x544 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D13__SD3_DAT5			0x15c 0x544 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D12__ECSPI2_SS1			0x160 0x548 0x930 0x2 0x1
+#define MX51_PAD_NANDF_D12__GPIO3_28			0x160 0x548 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D12__NANDF_D12			0x160 0x548 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D12__PATA_DATA12			0x160 0x548 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D12__SD3_DAT4			0x160 0x548 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D11__FEC_RX_DV			0x164 0x54c 0x96c 0x2 0x0
+#define MX51_PAD_NANDF_D11__GPIO3_29			0x164 0x54c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D11__NANDF_D11			0x164 0x54c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D11__PATA_DATA11			0x164 0x54c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D11__SD3_DATA3			0x164 0x54c 0x948 0x5 0x1
+#define MX51_PAD_NANDF_D10__GPIO3_30			0x168 0x550 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D10__NANDF_D10			0x168 0x550 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D10__PATA_DATA10			0x168 0x550 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D10__SD3_DATA2			0x168 0x550 0x944 0x5 0x1
+#define MX51_PAD_NANDF_D9__FEC_RDATA0			0x16c 0x554 0x958 0x2 0x0
+#define MX51_PAD_NANDF_D9__GPIO3_31			0x16c 0x554 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D9__NANDF_D9			0x16c 0x554 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D9__PATA_DATA9			0x16c 0x554 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D9__SD3_DATA1			0x16c 0x554 0x940 0x5 0x1
+#define MX51_PAD_NANDF_D8__FEC_TDATA0			0x170 0x558 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D8__GPIO4_0			0x170 0x558 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D8__NANDF_D8			0x170 0x558 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D8__PATA_DATA8			0x170 0x558 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D8__SD3_DATA0			0x170 0x558 0x93c 0x5 0x1
+#define MX51_PAD_NANDF_D7__GPIO4_1			0x174 0x55c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D7__NANDF_D7			0x174 0x55c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D7__PATA_DATA7			0x174 0x55c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D7__USBH3_DATA0			0x174 0x55c 0x9fc 0x5 0x0
+#define MX51_PAD_NANDF_D6__GPIO4_2			0x178 0x560 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D6__NANDF_D6			0x178 0x560 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D6__PATA_DATA6			0x178 0x560 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D6__SD4_LCTL			0x178 0x560 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D6__USBH3_DATA1			0x178 0x560 0xa00 0x5 0x0
+#define MX51_PAD_NANDF_D5__GPIO4_3			0x17c 0x564 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D5__NANDF_D5			0x17c 0x564 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D5__PATA_DATA5			0x17c 0x564 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D5__SD4_WP			0x17c 0x564 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D5__USBH3_DATA2			0x17c 0x564 0xa04 0x5 0x0
+#define MX51_PAD_NANDF_D4__GPIO4_4			0x180 0x568 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D4__NANDF_D4			0x180 0x568 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D4__PATA_DATA4			0x180 0x568 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D4__SD4_CD			0x180 0x568 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D4__USBH3_DATA3			0x180 0x568 0xa08 0x5 0x0
+#define MX51_PAD_NANDF_D3__GPIO4_5			0x184 0x56c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D3__NANDF_D3			0x184 0x56c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D3__PATA_DATA3			0x184 0x56c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D3__SD4_DAT4			0x184 0x56c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D3__USBH3_DATA4			0x184 0x56c 0xa0c 0x5 0x0
+#define MX51_PAD_NANDF_D2__GPIO4_6			0x188 0x570 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D2__NANDF_D2			0x188 0x570 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D2__PATA_DATA2			0x188 0x570 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D2__SD4_DAT5			0x188 0x570 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D2__USBH3_DATA5			0x188 0x570 0xa10 0x5 0x0
+#define MX51_PAD_NANDF_D1__GPIO4_7			0x18c 0x574 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D1__NANDF_D1			0x18c 0x574 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D1__PATA_DATA1			0x18c 0x574 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D1__SD4_DAT6			0x18c 0x574 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D1__USBH3_DATA6			0x18c 0x574 0xa14 0x5 0x0
+#define MX51_PAD_NANDF_D0__GPIO4_8			0x190 0x578 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D0__NANDF_D0			0x190 0x578 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D0__PATA_DATA0			0x190 0x578 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D0__SD4_DAT7			0x190 0x578 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D0__USBH3_DATA7			0x190 0x578 0xa18 0x5 0x0
+#define MX51_PAD_CSI1_D8__CSI1_D8			0x194 0x57c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D8__GPIO3_12			0x194 0x57c 0x998 0x3 0x1
+#define MX51_PAD_CSI1_D9__CSI1_D9			0x198 0x580 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D9__GPIO3_13			0x198 0x580 0x000 0x3 0x0
+#define MX51_PAD_CSI1_D10__CSI1_D10			0x19c 0x584 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D11__CSI1_D11			0x1a0 0x588 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D12__CSI1_D12			0x1a4 0x58c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D13__CSI1_D13			0x1a8 0x590 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D14__CSI1_D14			0x1ac 0x594 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D15__CSI1_D15			0x1b0 0x598 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D16__CSI1_D16			0x1b4 0x59c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D17__CSI1_D17			0x1b8 0x5a0 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D18__CSI1_D18			0x1bc 0x5a4 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D19__CSI1_D19			0x1c0 0x5a8 0x000 0x0 0x0
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC			0x1c4 0x5ac 0x000 0x0 0x0
+#define MX51_PAD_CSI1_VSYNC__GPIO3_14			0x1c4 0x5ac 0x000 0x3 0x0
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC			0x1c8 0x5b0 0x000 0x0 0x0
+#define MX51_PAD_CSI1_HSYNC__GPIO3_15			0x1c8 0x5b0 0x000 0x3 0x0
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK		0x000 0x5b4 0x000 0x0 0x0
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK			0x000 0x5b8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D12__CSI2_D12			0x1cc 0x5bc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D12__GPIO4_9			0x1cc 0x5bc 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D13__CSI2_D13			0x1d0 0x5c0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D13__GPIO4_10			0x1d0 0x5c0 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D14__CSI2_D14			0x1d4 0x5c4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D15__CSI2_D15			0x1d8 0x5c8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D16__CSI2_D16			0x1dc 0x5cc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D17__CSI2_D17			0x1e0 0x5d0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D18__CSI2_D18			0x1e4 0x5d4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D18__GPIO4_11			0x1e4 0x5d4 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D19__CSI2_D19			0x1e8 0x5d8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D19__GPIO4_12			0x1e8 0x5d8 0x000 0x3 0x0
+#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC			0x1ec 0x5dc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_VSYNC__GPIO4_13			0x1ec 0x5dc 0x000 0x3 0x0
+#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC			0x1f0 0x5e0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_HSYNC__GPIO4_14			0x1f0 0x5e0 0x000 0x3 0x0
+#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK		0x1f4 0x5e4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_PIXCLK__GPIO4_15			0x1f4 0x5e4 0x000 0x3 0x0
+#define MX51_PAD_I2C1_CLK__GPIO4_16			0x1f8 0x5e8 0x000 0x3 0x0
+#define MX51_PAD_I2C1_CLK__I2C1_CLK			0x1f8 0x5e8 0x000 0x0 0x0
+#define MX51_PAD_I2C1_DAT__GPIO4_17			0x1fc 0x5ec 0x000 0x3 0x0
+#define MX51_PAD_I2C1_DAT__I2C1_DAT			0x1fc 0x5ec 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD			0x200 0x5f0 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_TXD__GPIO4_18			0x200 0x5f0 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD			0x204 0x5f4 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_RXD__GPIO4_19			0x204 0x5f4 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_RXD__UART3_RXD			0x204 0x5f4 0x9f4 0x1 0x2
+#define MX51_PAD_AUD3_BB_CK__AUD3_TXC			0x208 0x5f8 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_CK__GPIO4_20			0x208 0x5f8 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS			0x20c 0x5fc 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_FS__GPIO4_21			0x20c 0x5fc 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_FS__UART3_TXD			0x20c 0x5fc 0x000 0x1 0x0
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI		0x210 0x600 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_MOSI__GPIO4_22			0x210 0x600 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_MOSI__I2C1_SDA			0x210 0x600 0x9b4 0x1 0x1
+#define MX51_PAD_CSPI1_MISO__AUD4_RXD			0x214 0x604 0x8c4 0x1 0x1
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO		0x214 0x604 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_MISO__GPIO4_23			0x214 0x604 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SS0__AUD4_TXC			0x218 0x608 0x8cc 0x1 0x1
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0			0x218 0x608 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SS0__GPIO4_24			0x218 0x608 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SS1__AUD4_TXD			0x21c 0x60c 0x8c8 0x1 0x1
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1			0x21c 0x60c 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SS1__GPIO4_25			0x21c 0x60c 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_RDY__AUD4_TXFS			0x220 0x610 0x8d0 0x1 0x1
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY			0x220 0x610 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_RDY__GPIO4_26			0x220 0x610 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK		0x224 0x614 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SCLK__GPIO4_27			0x224 0x614 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SCLK__I2C1_SCL			0x224 0x614 0x9b0 0x1 0x1
+#define MX51_PAD_UART1_RXD__GPIO4_28			0x228 0x618 0x000 0x3 0x0
+#define MX51_PAD_UART1_RXD__UART1_RXD			0x228 0x618 0x9e4 0x0 0x0
+#define MX51_PAD_UART1_TXD__GPIO4_29			0x22c 0x61c 0x000 0x3 0x0
+#define MX51_PAD_UART1_TXD__PWM2_PWMO			0x22c 0x61c 0x000 0x1 0x0
+#define MX51_PAD_UART1_TXD__UART1_TXD			0x22c 0x61c 0x000 0x0 0x0
+#define MX51_PAD_UART1_RTS__GPIO4_30			0x230 0x620 0x000 0x3 0x0
+#define MX51_PAD_UART1_RTS__UART1_RTS			0x230 0x620 0x9e0 0x0 0x0
+#define MX51_PAD_UART1_CTS__GPIO4_31			0x234 0x624 0x000 0x3 0x0
+#define MX51_PAD_UART1_CTS__UART1_CTS			0x234 0x624 0x000 0x0 0x0
+#define MX51_PAD_UART2_RXD__FIRI_TXD			0x238 0x628 0x000 0x1 0x0
+#define MX51_PAD_UART2_RXD__GPIO1_20			0x238 0x628 0x000 0x3 0x0
+#define MX51_PAD_UART2_RXD__UART2_RXD			0x238 0x628 0x9ec 0x0 0x2
+#define MX51_PAD_UART2_TXD__FIRI_RXD			0x23c 0x62c 0x000 0x1 0x0
+#define MX51_PAD_UART2_TXD__GPIO1_21			0x23c 0x62c 0x000 0x3 0x0
+#define MX51_PAD_UART2_TXD__UART2_TXD			0x23c 0x62c 0x000 0x0 0x0
+#define MX51_PAD_UART3_RXD__CSI1_D0			0x240 0x630 0x000 0x2 0x0
+#define MX51_PAD_UART3_RXD__GPIO1_22			0x240 0x630 0x000 0x3 0x0
+#define MX51_PAD_UART3_RXD__UART1_DTR			0x240 0x630 0x000 0x0 0x0
+#define MX51_PAD_UART3_RXD__UART3_RXD			0x240 0x630 0x9f4 0x1 0x4
+#define MX51_PAD_UART3_TXD__CSI1_D1			0x244 0x634 0x000 0x2 0x0
+#define MX51_PAD_UART3_TXD__GPIO1_23			0x244 0x634 0x000 0x3 0x0
+#define MX51_PAD_UART3_TXD__UART1_DSR			0x244 0x634 0x000 0x0 0x0
+#define MX51_PAD_UART3_TXD__UART3_TXD			0x244 0x634 0x000 0x1 0x0
+#define MX51_PAD_OWIRE_LINE__GPIO1_24			0x248 0x638 0x000 0x3 0x0
+#define MX51_PAD_OWIRE_LINE__OWIRE_LINE			0x248 0x638 0x000 0x0 0x0
+#define MX51_PAD_OWIRE_LINE__SPDIF_OUT			0x248 0x638 0x000 0x6 0x0
+#define MX51_PAD_KEY_ROW0__KEY_ROW0			0x24c 0x63c 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW1__KEY_ROW1			0x250 0x640 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW2__KEY_ROW2			0x254 0x644 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW3__KEY_ROW3			0x258 0x648 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL0__KEY_COL0			0x25c 0x64c 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL0__PLL1_BYP			0x25c 0x64c 0x90c 0x7 0x0
+#define MX51_PAD_KEY_COL1__KEY_COL1			0x260 0x650 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL1__PLL2_BYP			0x260 0x650 0x910 0x7 0x0
+#define MX51_PAD_KEY_COL2__KEY_COL2			0x264 0x654 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL2__PLL3_BYP			0x264 0x654 0x000 0x7 0x0
+#define MX51_PAD_KEY_COL3__KEY_COL3			0x268 0x658 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL4__I2C2_SCL			0x26c 0x65c 0x9b8 0x3 0x1
+#define MX51_PAD_KEY_COL4__KEY_COL4			0x26c 0x65c 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL4__SPDIF_OUT1			0x26c 0x65c 0x000 0x6 0x0
+#define MX51_PAD_KEY_COL4__UART1_RI			0x26c 0x65c 0x000 0x1 0x0
+#define MX51_PAD_KEY_COL4__UART3_RTS			0x26c 0x65c 0x9f0 0x2 0x4
+#define MX51_PAD_KEY_COL5__I2C2_SDA			0x270 0x660 0x9bc 0x3 0x1
+#define MX51_PAD_KEY_COL5__KEY_COL5			0x270 0x660 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL5__UART1_DCD			0x270 0x660 0x000 0x1 0x0
+#define MX51_PAD_KEY_COL5__UART3_CTS			0x270 0x660 0x000 0x2 0x0
+#define MX51_PAD_USBH1_CLK__CSPI_SCLK			0x278 0x678 0x914 0x1 0x1
+#define MX51_PAD_USBH1_CLK__GPIO1_25			0x278 0x678 0x000 0x2 0x0
+#define MX51_PAD_USBH1_CLK__I2C2_SCL			0x278 0x678 0x9b8 0x5 0x2
+#define MX51_PAD_USBH1_CLK__USBH1_CLK			0x278 0x678 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DIR__CSPI_MOSI			0x27c 0x67c 0x91c 0x1 0x1
+#define MX51_PAD_USBH1_DIR__GPIO1_26			0x27c 0x67c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DIR__I2C2_SDA			0x27c 0x67c 0x9bc 0x5 0x2
+#define MX51_PAD_USBH1_DIR__USBH1_DIR			0x27c 0x67c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_STP__CSPI_RDY			0x280 0x680 0x000 0x1 0x0
+#define MX51_PAD_USBH1_STP__GPIO1_27			0x280 0x680 0x000 0x2 0x0
+#define MX51_PAD_USBH1_STP__UART3_RXD			0x280 0x680 0x9f4 0x5 0x6
+#define MX51_PAD_USBH1_STP__USBH1_STP			0x280 0x680 0x000 0x0 0x0
+#define MX51_PAD_USBH1_NXT__CSPI_MISO			0x284 0x684 0x918 0x1 0x0
+#define MX51_PAD_USBH1_NXT__GPIO1_28			0x284 0x684 0x000 0x2 0x0
+#define MX51_PAD_USBH1_NXT__UART3_TXD			0x284 0x684 0x000 0x5 0x0
+#define MX51_PAD_USBH1_NXT__USBH1_NXT			0x284 0x684 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA0__GPIO1_11			0x288 0x688 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA0__UART2_CTS			0x288 0x688 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0		0x288 0x688 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA1__GPIO1_12			0x28c 0x68c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA1__UART2_RXD			0x28c 0x68c 0x9ec 0x1 0x4
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1		0x28c 0x68c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA2__GPIO1_13			0x290 0x690 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA2__UART2_TXD			0x290 0x690 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2		0x290 0x690 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA3__GPIO1_14			0x294 0x694 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA3__UART2_RTS			0x294 0x694 0x9e8 0x1 0x5
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3		0x294 0x694 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA4__CSPI_SS0			0x298 0x698 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA4__GPIO1_15			0x298 0x698 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4		0x298 0x698 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA5__CSPI_SS1			0x29c 0x69c 0x920 0x1 0x0
+#define MX51_PAD_USBH1_DATA5__GPIO1_16			0x29c 0x69c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5		0x29c 0x69c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA6__CSPI_SS3			0x2a0 0x6a0 0x928 0x1 0x1
+#define MX51_PAD_USBH1_DATA6__GPIO1_17			0x2a0 0x6a0 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6		0x2a0 0x6a0 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3		0x2a4 0x6a4 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3		0x2a4 0x6a4 0x934 0x5 0x1
+#define MX51_PAD_USBH1_DATA7__GPIO1_18			0x2a4 0x6a4 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7		0x2a4 0x6a4 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN11__DI1_PIN11			0x2a8 0x6a8 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN11__ECSPI1_SS2			0x2a8 0x6a8 0x000 0x7 0x0
+#define MX51_PAD_DI1_PIN11__GPIO3_0			0x2a8 0x6a8 0x000 0x4 0x0
+#define MX51_PAD_DI1_PIN12__DI1_PIN12			0x2ac 0x6ac 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN12__GPIO3_1			0x2ac 0x6ac 0x978 0x4 0x1
+#define MX51_PAD_DI1_PIN13__DI1_PIN13			0x2b0 0x6b0 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN13__GPIO3_2			0x2b0 0x6b0 0x97c 0x4 0x1
+#define MX51_PAD_DI1_D0_CS__DI1_D0_CS			0x2b4 0x6b4 0x000 0x0 0x0
+#define MX51_PAD_DI1_D0_CS__GPIO3_3			0x2b4 0x6b4 0x980 0x4 0x1
+#define MX51_PAD_DI1_D1_CS__DI1_D1_CS			0x2b8 0x6b8 0x000 0x0 0x0
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN14			0x2b8 0x6b8 0x000 0x2 0x0
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN5			0x2b8 0x6b8 0x000 0x3 0x0
+#define MX51_PAD_DI1_D1_CS__GPIO3_4			0x2b8 0x6b8 0x984 0x4 0x1
+#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1		0x2bc 0x6bc 0x9a4 0x2 0x1
+#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN		0x2bc 0x6bc 0x9c4 0x0 0x0
+#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5		0x2bc 0x6bc 0x988 0x4 0x1
+#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6		0x2c0 0x6c0 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		0x2c0 0x6c0 0x9c4 0x0 0x1
+#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6		0x2c0 0x6c0 0x98c 0x4 0x1
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17		0x2c4 0x6c4 0x000 0x2 0x0
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
+#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
+#define MX51_PAD_DISPB2_SER_RS__GPIO3_8			0x2c8 0x6c8 0x994 0x4 0x1
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0			0x2cc 0x6cc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1			0x2d0 0x6d0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2			0x2d4 0x6d4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3			0x2d8 0x6d8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4			0x2dc 0x6dc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5			0x2e0 0x6e0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC		0x2e4 0x6e4 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6			0x2e4 0x6e4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG		0x2e8 0x6e8 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7			0x2e8 0x6e8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT8__BOOT_SRC0			0x2ec 0x6ec 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8			0x2ec 0x6ec 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT9__BOOT_SRC1			0x2f0 0x6f0 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9			0x2f0 0x6f0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE		0x2f4 0x6f4 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10		0x2f4 0x6f4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2		0x2f8 0x6f8 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11		0x2f8 0x6f8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL		0x2fc 0x6fc 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12		0x2fc 0x6fc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0		0x300 0x700 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13		0x300 0x700 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1		0x304 0x704 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14		0x304 0x704 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH		0x308 0x708 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15		0x308 0x708 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0		0x30c 0x70c 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16		0x30c 0x70c 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1		0x310 0x710 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17		0x310 0x710 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0		0x314 0x714 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18		0x314 0x714 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN11		0x314 0x714 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN5		0x314 0x714 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1		0x318 0x718 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19		0x318 0x718 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN12		0x318 0x718 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN6		0x318 0x718 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0		0x31c 0x71c 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20		0x31c 0x71c 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN13		0x31c 0x71c 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN7		0x31c 0x71c 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1		0x320 0x720 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21		0x320 0x720 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN14		0x320 0x720 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN8		0x320 0x720 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0		0x324 0x724 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22		0x324 0x724 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS		0x324 0x724 0x000 0x6 0x0
+#define MX51_PAD_DISP1_DAT22__DISP2_DAT16		0x324 0x724 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1		0x328 0x728 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23		0x328 0x728 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS		0x328 0x728 0x000 0x6 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_DAT17		0x328 0x728 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS		0x328 0x728 0x000 0x4 0x0
+#define MX51_PAD_DI1_PIN3__DI1_PIN3			0x32c 0x72c 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN2__DI1_PIN2			0x330 0x734 0x000 0x0 0x0
+#define MX51_PAD_DI_GP2__DISP1_SER_CLK			0x338 0x740 0x000 0x0 0x0
+#define MX51_PAD_DI_GP2__DISP2_WAIT			0x338 0x740 0x9a8 0x2 0x1
+#define MX51_PAD_DI_GP3__CSI1_DATA_EN			0x33c 0x744 0x9a0 0x3 0x1
+#define MX51_PAD_DI_GP3__DISP1_SER_DIO			0x33c 0x744 0x9c0 0x0 0x0
+#define MX51_PAD_DI_GP3__FEC_TX_ER			0x33c 0x744 0x000 0x2 0x0
+#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN			0x340 0x748 0x99c 0x3 0x1
+#define MX51_PAD_DI2_PIN4__DI2_PIN4			0x340 0x748 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN4__FEC_CRS			0x340 0x748 0x950 0x2 0x1
+#define MX51_PAD_DI2_PIN2__DI2_PIN2			0x344 0x74c 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN2__FEC_MDC			0x344 0x74c 0x000 0x2 0x0
+#define MX51_PAD_DI2_PIN3__DI2_PIN3			0x348 0x750 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN3__FEC_MDIO			0x348 0x750 0x954 0x2 0x1
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK		0x34c 0x754 0x000 0x0 0x0
+#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1		0x34c 0x754 0x95c 0x2 0x1
+#define MX51_PAD_DI_GP4__DI2_PIN15			0x350 0x758 0x000 0x4 0x0
+#define MX51_PAD_DI_GP4__DISP1_SER_DIN			0x350 0x758 0x9c0 0x0 0x1
+#define MX51_PAD_DI_GP4__DISP2_PIN1			0x350 0x758 0x000 0x3 0x0
+#define MX51_PAD_DI_GP4__FEC_RDATA2			0x350 0x758 0x960 0x2 0x1
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0			0x354 0x75c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT0__FEC_RDATA3			0x354 0x75c 0x964 0x2 0x1
+#define MX51_PAD_DISP2_DAT0__KEY_COL6			0x354 0x75c 0x9c8 0x4 0x1
+#define MX51_PAD_DISP2_DAT0__UART3_RXD			0x354 0x75c 0x9f4 0x5 0x8
+#define MX51_PAD_DISP2_DAT0__USBH3_CLK			0x354 0x75c 0x9f8 0x3 0x1
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1			0x358 0x760 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT1__FEC_RX_ER			0x358 0x760 0x970 0x2 0x1
+#define MX51_PAD_DISP2_DAT1__KEY_COL7			0x358 0x760 0x9cc 0x4 0x1
+#define MX51_PAD_DISP2_DAT1__UART3_TXD			0x358 0x760 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT1__USBH3_DIR			0x358 0x760 0xa1c 0x3 0x1
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2			0x35c 0x764 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3			0x360 0x768 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4			0x364 0x76c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5			0x368 0x770 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT6__DISP2_DAT6			0x36c 0x774 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT6__FEC_TDATA1			0x36c 0x774 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT6__GPIO1_19			0x36c 0x774 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT6__KEY_ROW4			0x36c 0x774 0x9d0 0x4 0x1
+#define MX51_PAD_DISP2_DAT6__USBH3_STP			0x36c 0x774 0xa24 0x3 0x1
+#define MX51_PAD_DISP2_DAT7__DISP2_DAT7			0x370 0x778 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT7__FEC_TDATA2			0x370 0x778 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT7__GPIO1_29			0x370 0x778 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT7__KEY_ROW5			0x370 0x778 0x9d4 0x4 0x1
+#define MX51_PAD_DISP2_DAT7__USBH3_NXT			0x370 0x778 0xa20 0x3 0x1
+#define MX51_PAD_DISP2_DAT8__DISP2_DAT8			0x374 0x77c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT8__FEC_TDATA3			0x374 0x77c 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT8__GPIO1_30			0x374 0x77c 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT8__KEY_ROW6			0x374 0x77c 0x9d8 0x4 0x1
+#define MX51_PAD_DISP2_DAT8__USBH3_DATA0		0x374 0x77c 0x9fc 0x3 0x1
+#define MX51_PAD_DISP2_DAT9__AUD6_RXC			0x378 0x780 0x8f4 0x4 0x1
+#define MX51_PAD_DISP2_DAT9__DISP2_DAT9			0x378 0x780 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT9__FEC_TX_EN			0x378 0x780 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT9__GPIO1_31			0x378 0x780 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT9__USBH3_DATA1		0x378 0x780 0xa00 0x3 0x1
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10		0x37c 0x784 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS		0x37c 0x784 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT10__FEC_COL			0x37c 0x784 0x94c 0x2 0x1
+#define MX51_PAD_DISP2_DAT10__KEY_ROW7			0x37c 0x784 0x9dc 0x4 0x1
+#define MX51_PAD_DISP2_DAT10__USBH3_DATA2		0x37c 0x784 0xa04 0x3 0x1
+#define MX51_PAD_DISP2_DAT11__AUD6_TXD			0x380 0x788 0x8f0 0x4 0x1
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11		0x380 0x788 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK		0x380 0x788 0x968 0x2 0x1
+#define MX51_PAD_DISP2_DAT11__GPIO1_10			0x380 0x788 0x000 0x7 0x0
+#define MX51_PAD_DISP2_DAT11__USBH3_DATA3		0x380 0x788 0xa08 0x3 0x1
+#define MX51_PAD_DISP2_DAT12__AUD6_RXD			0x384 0x78c 0x8ec 0x4 0x1
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12		0x384 0x78c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT12__FEC_RX_DV			0x384 0x78c 0x96c 0x2 0x1
+#define MX51_PAD_DISP2_DAT12__USBH3_DATA4		0x384 0x78c 0xa0c 0x3 0x1
+#define MX51_PAD_DISP2_DAT13__AUD6_TXC			0x388 0x790 0x8fc 0x4 0x1
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13		0x388 0x790 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK		0x388 0x790 0x974 0x2 0x1
+#define MX51_PAD_DISP2_DAT13__USBH3_DATA5		0x388 0x790 0xa10 0x3 0x1
+#define MX51_PAD_DISP2_DAT14__AUD6_TXFS			0x38c 0x794 0x900 0x4 0x1
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14		0x38c 0x794 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT14__FEC_RDATA0		0x38c 0x794 0x958 0x2 0x1
+#define MX51_PAD_DISP2_DAT14__USBH3_DATA6		0x38c 0x794 0xa14 0x3 0x1
+#define MX51_PAD_DISP2_DAT15__AUD6_RXFS			0x390 0x798 0x8f8 0x4 0x1
+#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS		0x390 0x798 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15		0x390 0x798 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT15__FEC_TDATA0		0x390 0x798 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT15__USBH3_DATA7		0x390 0x798 0xa18 0x3 0x1
+#define MX51_PAD_SD1_CMD__AUD5_RXFS			0x394 0x79c 0x8e0 0x1 0x1
+#define MX51_PAD_SD1_CMD__CSPI_MOSI			0x394 0x79c 0x91c 0x2 0x2
+#define MX51_PAD_SD1_CMD__SD1_CMD			0x394 0x79c 0x000 0x0 0x0
+#define MX51_PAD_SD1_CLK__AUD5_RXC			0x398 0x7a0 0x8dc 0x1 0x1
+#define MX51_PAD_SD1_CLK__CSPI_SCLK			0x398 0x7a0 0x914 0x2 0x2
+#define MX51_PAD_SD1_CLK__SD1_CLK			0x398 0x7a0 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA0__AUD5_TXD			0x39c 0x7a4 0x8d8 0x1 0x2
+#define MX51_PAD_SD1_DATA0__CSPI_MISO			0x39c 0x7a4 0x918 0x2 0x1
+#define MX51_PAD_SD1_DATA0__SD1_DATA0			0x39c 0x7a4 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA0__EIM_DA0			0x01c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA1__EIM_DA1			0x020 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA2__EIM_DA2			0x024 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA3__EIM_DA3			0x028 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA1__AUD5_RXD			0x3a0 0x7a8 0x8d4 0x1 0x2
+#define MX51_PAD_SD1_DATA1__SD1_DATA1			0x3a0 0x7a8 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA4__EIM_DA4			0x02c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA5__EIM_DA5			0x030 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA6__EIM_DA6			0x034 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA7__EIM_DA7			0x038 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA2__AUD5_TXC			0x3a4 0x7ac 0x8e4 0x1 0x2
+#define MX51_PAD_SD1_DATA2__SD1_DATA2			0x3a4 0x7ac 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA10__EIM_DA10			0x044 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA11__EIM_DA11			0x048 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA8__EIM_DA8			0x03c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA9__EIM_DA9			0x040 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS			0x3a8 0x7b0 0x8e8 0x1 0x2
+#define MX51_PAD_SD1_DATA3__CSPI_SS1			0x3a8 0x7b0 0x920 0x2 0x1
+#define MX51_PAD_SD1_DATA3__SD1_DATA3			0x3a8 0x7b0 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_0__CSPI_SS2			0x3ac 0x7b4 0x924 0x2 0x0
+#define MX51_PAD_GPIO1_0__GPIO1_0			0x3ac 0x7b4 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_0__SD1_CD			0x3ac 0x7b4 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_1__CSPI_MISO			0x3b0 0x7b8 0x918 0x2 0x2
+#define MX51_PAD_GPIO1_1__GPIO1_1			0x3b0 0x7b8 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_1__SD1_WP			0x3b0 0x7b8 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA12__EIM_DA12			0x04c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA13__EIM_DA13			0x050 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA14__EIM_DA14			0x054 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA15__EIM_DA15			0x058 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD2_CMD__CSPI_MOSI			0x3b4 0x7bc 0x91c 0x2 0x3
+#define MX51_PAD_SD2_CMD__I2C1_SCL			0x3b4 0x7bc 0x9b0 0x1 0x2
+#define MX51_PAD_SD2_CMD__SD2_CMD			0x3b4 0x7bc 0x000 0x0 0x0
+#define MX51_PAD_SD2_CLK__CSPI_SCLK			0x3b8 0x7c0 0x914 0x2 0x3
+#define MX51_PAD_SD2_CLK__I2C1_SDA			0x3b8 0x7c0 0x9b4 0x1 0x2
+#define MX51_PAD_SD2_CLK__SD2_CLK			0x3b8 0x7c0 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA0__CSPI_MISO			0x3bc 0x7c4 0x918 0x2 0x3
+#define MX51_PAD_SD2_DATA0__SD1_DAT4			0x3bc 0x7c4 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA0__SD2_DATA0			0x3bc 0x7c4 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA1__SD1_DAT5			0x3c0 0x7c8 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA1__SD2_DATA1			0x3c0 0x7c8 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP			0x3c0 0x7c8 0x000 0x2 0x0
+#define MX51_PAD_SD2_DATA2__SD1_DAT6			0x3c4 0x7cc 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA2__SD2_DATA2			0x3c4 0x7cc 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM			0x3c4 0x7cc 0x000 0x2 0x0
+#define MX51_PAD_SD2_DATA3__CSPI_SS2			0x3c8 0x7d0 0x924 0x2 0x1
+#define MX51_PAD_SD2_DATA3__SD1_DAT7			0x3c8 0x7d0 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA3__SD2_DATA3			0x3c8 0x7d0 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_2__CCM_OUT_2			0x3cc 0x7d4 0x000 0x5 0x0
+#define MX51_PAD_GPIO1_2__GPIO1_2			0x3cc 0x7d4 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_2__I2C2_SCL			0x3cc 0x7d4 0x9b8 0x2 0x3
+#define MX51_PAD_GPIO1_2__PLL1_BYP			0x3cc 0x7d4 0x90c 0x7 0x1
+#define MX51_PAD_GPIO1_2__PWM1_PWMO			0x3cc 0x7d4 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_3__GPIO1_3			0x3d0 0x7d8 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_3__I2C2_SDA			0x3d0 0x7d8 0x9bc 0x2 0x3
+#define MX51_PAD_GPIO1_3__PLL2_BYP			0x3d0 0x7d8 0x910 0x7 0x1
+#define MX51_PAD_GPIO1_3__PWM2_PWMO			0x3d0 0x7d8 0x000 0x1 0x0
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ		0x3d4 0x7fc 0x000 0x0 0x0
+#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B		0x3d4 0x7fc 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK			0x3d8 0x804 0x908 0x4 0x1
+#define MX51_PAD_GPIO1_4__EIM_RDY			0x3d8 0x804 0x938 0x3 0x1
+#define MX51_PAD_GPIO1_4__GPIO1_4			0x3d8 0x804 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B			0x3d8 0x804 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_5__CSI2_MCLK			0x3dc 0x808 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_5__DISP2_PIN16			0x3dc 0x808 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_5__GPIO1_5			0x3dc 0x808 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B			0x3dc 0x808 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_6__DISP2_PIN17			0x3e0 0x80c 0x000 0x4 0x0
+#define MX51_PAD_GPIO1_6__GPIO1_6			0x3e0 0x80c 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_6__REF_EN_B			0x3e0 0x80c 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_7__CCM_OUT_0			0x3e4 0x810 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_7__GPIO1_7			0x3e4 0x810 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_7__SD2_WP			0x3e4 0x810 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_7__SPDIF_OUT1			0x3e4 0x810 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_8__CSI2_DATA_EN			0x3e8 0x814 0x99c 0x2 0x2
+#define MX51_PAD_GPIO1_8__GPIO1_8			0x3e8 0x814 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_8__SD2_CD			0x3e8 0x814 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_8__USBH3_PWR			0x3e8 0x814 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_9__CCM_OUT_1			0x3ec 0x818 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_9__DISP2_D1_CS			0x3ec 0x818 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_9__DISP2_SER_CS			0x3ec 0x818 0x000 0x7 0x0
+#define MX51_PAD_GPIO1_9__GPIO1_9			0x3ec 0x818 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_9__SD2_LCTL			0x3ec 0x818 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_9__USBH3_OC			0x3ec 0x818 0x000 0x1 0x0
+
+#endif /* __DTS_IMX51_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx51.dtsi b/roms/u-boot/arch/arm/dts/imx51.dtsi
new file mode 100644
index 000000000..7ebb46ce9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx51.dtsi
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx51-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	tzic: tz-interrupt-controller@e0000000 {
+		compatible = "fsl,imx51-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xe0000000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX5_CLK_CPU_PODF>;
+			clock-names = "cpu";
+			operating-points = <
+				166000	1000000
+				600000	1050000
+				800000	1100000
+			>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		iram: sram@1ffe0000 {
+			compatible = "mmio-sram";
+			reg = <0x1ffe0000 0x20000>;
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.1", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
+		ipu: ipu@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx51-ipu";
+			reg = <0x40000000 0x20000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
+			ipu_di0: port@2 {
+				reg = <2>;
+
+				ipu_di0_disp1: endpoint {
+				};
+			};
+
+			ipu_di1: port@3 {
+				reg = <3>;
+
+				ipu_di1_disp2: endpoint {
+				};
+			};
+		};
+
+		bus@70000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x70000000 0x10000000>;
+			ranges;
+
+			spba@70000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x70000000 0x40000>;
+				ranges;
+
+				esdhc1: mmc@70004000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					status = "disabled";
+				};
+
+				esdhc2: mmc@70008000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@7000c000 {
+					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+					reg = <0x7000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi1: spi@70010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx51-ecspi";
+					reg = <0x70010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@70014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+					reg = <0x70014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: mmc@70020000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: mmc@70024000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			aipstz1: bridge@73f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x73f00000 0x60>;
+			};
+
+			usbotg: usb@73f80000 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@73f80200 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@73f80400 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh3: usb@73f80600 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@73f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx51-usbmisc";
+				reg = <0x73f80800 0x200>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+			};
+
+			gpio1: gpio@73f84000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@73f88000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@73f8c000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@73f90000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@73f94000 {
+				compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+				reg = <0x73f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@73f98000 {
+				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+				reg = <0x73f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			wdog2: watchdog@73f9c000 {
+				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+				reg = <0x73f9c000 0x4000>;
+				interrupts = <59>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			gpt: timer@73fa0000 {
+				compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
+				reg = <0x73fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@73fa8000 {
+				compatible = "fsl,imx51-iomuxc";
+				reg = <0x73fa8000 0x4000>;
+			};
+
+			pwm1: pwm@73fb4000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
+				reg = <0x73fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@73fb8000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
+				reg = <0x73fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@73fbc000 {
+				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+				reg = <0x73fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@73fc0000 {
+				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+				reg = <0x73fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: reset-controller@73fd0000 {
+				compatible = "fsl,imx51-src";
+				reg = <0x73fd0000 0x4000>;
+				interrupts = <75>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@73fd4000{
+				compatible = "fsl,imx51-ccm";
+				reg = <0x73fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+		};
+
+		bus@80000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x10000000>;
+			ranges;
+
+			aipstz2: bridge@83f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x83f00000 0x60>;
+			};
+
+			iim: efuse@83f98000 {
+				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
+				reg = <0x83f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			tigerp: tigerp@83fa0000 {
+				compatible = "fsl,imx51-tigerp";
+				reg = <0x83fa0000 0x28>;
+			};
+
+			owire: owire@83fa4000 {
+				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
+				reg = <0x83fa4000 0x4000>;
+				interrupts = <88>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@83fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-ecspi";
+				reg = <0x83fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: sdma@83fb0000 {
+				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+				reg = <0x83fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
+			};
+
+			cspi: spi@83fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
+				reg = <0x83fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@83fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+				reg = <0x83fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@83fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+				reg = <0x83fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@83fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@83fd0000 {
+				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
+				reg = <0x83fd0000 0x4000>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
+			m4if: m4if@83fd8000 {
+				compatible = "fsl,imx51-m4if";
+				reg = <0x83fd8000 0x1000>;
+			};
+
+			weim: weim@83fda000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx51-weim";
+				reg = <0x83fda000 0x1000>;
+				clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
+				ranges = <
+					0 0 0xb0000000 0x08000000
+					1 0 0xb8000000 0x08000000
+					2 0 0xc0000000 0x08000000
+					3 0 0xc8000000 0x04000000
+					4 0 0xcc000000 0x02000000
+					5 0 0xce000000 0x02000000
+				>;
+				status = "disabled";
+			};
+
+			nfc: nand@83fdb000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx51-nand";
+				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
+				interrupts = <8>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
+				status = "disabled";
+			};
+
+			pata: pata@83fe0000 {
+				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+				reg = <0x83fe0000 0x4000>;
+				interrupts = <70>;
+				clocks = <&clks IMX5_CLK_PATA_GATE>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@83fe8000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fe8000 0x4000>;
+				interrupts = <96>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@83fec000 {
+				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+				reg = <0x83fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			vpu: vpu@83ff4000 {
+				compatible = "fsl,imx51-vpu", "cnm,codahx4";
+				reg = <0x83ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&iram>;
+			};
+
+			sahara: crypto@83ff8000 {
+				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
+				reg = <0x83ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-cx9020.dts b/roms/u-boot/arch/arm/dts/imx53-cx9020.dts
new file mode 100644
index 000000000..e08850999
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-cx9020.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2016 Beckhoff Automation
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+#define MX53_PAD_EIM_D26__UART2_RXD_MUX    0x144 0x48c 0x880 0x2 0x0
+#define MX53_PAD_EIM_D27__UART2_TXD_MUX    0x148 0x490 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__UART2_RTS        0x14c 0x494 0x87c 0x2 0x0
+#define MX53_PAD_EIM_D29__UART2_CTS        0x150 0x498 0x000 0x2 0x0
+
+/ {
+	model = "Beckhoff CX9020-0100 i.MX53";
+	compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_GPIO_1__GPIO1_1          0x80000000
+				MX53_PAD_GPIO_4__GPIO1_4          0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+
+				MX53_PAD_EIM_OE__EMI_WEIM_OE            0x80000000
+				MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT        0x80000000
+				MX53_PAD_EIM_LBA__EMI_WEIM_LBA          0x80000000
+				MX53_PAD_EIM_RW__EMI_WEIM_RW            0x80000000
+				MX53_PAD_EIM_EB0__EMI_WEIM_EB_0         0x80000000
+				MX53_PAD_EIM_EB1__EMI_WEIM_EB_1         0x80000000
+				MX53_PAD_EIM_EB2__EMI_WEIM_EB_2         0x80000000
+				MX53_PAD_EIM_EB3__EMI_WEIM_EB_3         0x80000000
+				MX53_PAD_EIM_CS0__EMI_WEIM_CS_0         0x80000000
+				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1         0x80000000
+				MX53_PAD_EIM_A16__EMI_WEIM_A_16         0x80000000
+				MX53_PAD_EIM_A17__EMI_WEIM_A_17         0x80000000
+				MX53_PAD_EIM_A18__EMI_WEIM_A_18         0x80000000
+				MX53_PAD_EIM_A19__EMI_WEIM_A_19         0x80000000
+				MX53_PAD_EIM_A20__EMI_WEIM_A_20         0x80000000
+				MX53_PAD_EIM_A21__EMI_WEIM_A_21         0x80000000
+				MX53_PAD_EIM_A22__EMI_WEIM_A_22         0x80000000
+				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0    0xa4
+				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1    0xa4
+				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2    0xa4
+				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3    0xa4
+				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4    0xa4
+				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5    0xa4
+				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6    0xa4
+				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7    0xa4
+				MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8    0xa4
+				MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9    0xa4
+				MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10	0xa4
+				MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11  0xa4
+				MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12  0xa4
+				MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13  0xa4
+				MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14  0xa4
+				MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15  0xa4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0      0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1      0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2      0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3      0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4      0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5      0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6      0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7      0xa4
+				MX53_PAD_PATA_DATA8__EMI_NANDF_D_8      0xa4
+				MX53_PAD_PATA_DATA9__EMI_NANDF_D_9      0xa4
+				MX53_PAD_PATA_DATA10__EMI_NANDF_D_10    0xa4
+				MX53_PAD_PATA_DATA11__EMI_NANDF_D_11    0xa4
+				MX53_PAD_PATA_DATA12__EMI_NANDF_D_12    0xa4
+				MX53_PAD_PATA_DATA13__EMI_NANDF_D_13    0xa4
+				MX53_PAD_PATA_DATA14__EMI_NANDF_D_14    0xa4
+				MX53_PAD_PATA_DATA15__EMI_NANDF_D_15    0xa4
+				MX53_PAD_NANDF_CLE__GPIO6_7             0x00000001
+				MX53_PAD_NANDF_WP_B__GPIO6_9            0x00000001
+				MX53_PAD_NANDF_ALE__GPIO6_8             0x00000001
+
+				MX53_PAD_EIM_D23__GPIO3_23 0x80000000
+
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
+
+                                MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
+                                MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
+
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_fec0: fec0grp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
+				MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
+				MX53_PAD_EIM_D28__UART2_RTS 0x1e4
+				MX53_PAD_EIM_D29__UART2_CTS 0x1e4
+			>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	fsl,dte-mode;
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+	fixed-link { /* RMII fixed link to KZ8863 */
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&usbh1 {
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-kp-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx53-kp-u-boot.dtsi
new file mode 100644
index 000000000..a112db9d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-kp-u-boot.dtsi
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+&fec {
+	fixed-link { /* RMII fixed link for both HSC|DDC */
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&pmic {
+	u-boot,i2c-transaction-bytes = <3>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-kp.dts b/roms/u-boot/arch/arm/dts/imx53-kp.dts
new file mode 100644
index 000000000..03e571d27
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-kp.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx53.dtsi"
+#include "imx53-pinfunc.h"
+
+/ {
+	model = "K+P iMX53";
+	compatible = "kp,imx53-kp", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		mmc0 = &esdhc3;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usbh1_vbus: regulator-usbh1-vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eth>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock_frequency = <100000>;
+
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x8>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock_frequency = <100000>;
+
+	scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-kp {
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0        0x1d4
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1        0x1d4
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2       0x1d4
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3       0x1d4
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4        0x1d4
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5        0x1d4
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6        0x1d4
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7        0x1d4
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD       0x1e4
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK         0x1d4
+			>;
+		};
+
+		pinctrl_eth: ethgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
+				MX53_PAD_FEC_MDC__FEC_MDC 0x4
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
+				/* The RX_ER pin needs to be pull down */
+				/* for this device */
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1c0
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
+				>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* PHY RESET */
+				MX53_PAD_PATA_DA_0__GPIO7_6 0x182
+				/* BOOSTER_OFF */
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+				/* LCD BACKLIGHT */
+				MX53_PAD_GPIO_1__GPIO1_1 0x1e4
+				/* KEY1 GPIO */
+				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+				/* LED GREEN GPIO */
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1e4
+				/* LED RED GPIO */
+				MX53_PAD_EIM_D28__GPIO3_28 0x1e4
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA
+						 (0x1ee | IMX_PAD_SION)
+				MX53_PAD_KEY_COL3__I2C2_SCL
+						 (0x1ee | IMX_PAD_SION)
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2grpgpio {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__GPIO4_13 0x1e4
+				MX53_PAD_KEY_COL3__GPIO4_12 0x1e4
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA (0x1ee | IMX_PAD_SION)
+				MX53_PAD_GPIO_5__I2C3_SCL (0x1ee | IMX_PAD_SION)
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3grpgpio {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__GPIO1_6 0x1e4
+				MX53_PAD_GPIO_5__GPIO1_5 0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				/* VBUS_PWR_EN */
+				MX53_PAD_PATA_DA_2__GPIO7_8 0x1e4
+			>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-m53.dtsi b/roms/u-boot/arch/arm/dts/imx53-m53.dtsi
new file mode 100644
index 000000000..fe5e0d308
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-m53.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_backlight: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd-supply";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "st,stmpe610";
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-m53menlo-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx53-m53menlo-u-boot.dtsi
new file mode 100644
index 000000000..bc4b3483a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-m53menlo-u-boot.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+
+		aips@50000000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio4 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio5 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio6 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio7 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-m53menlo.dts b/roms/u-boot/arch/arm/dts/imx53-m53menlo.dts
new file mode 100644
index 000000000..3767dcaef
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-m53menlo.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+#include "imx53-m53menlo-u-boot.dtsi"
+
+/ {
+	model = "MENLO M53 EMBEDDED DEVICE";
+	compatible = "menlo,m53menlo", "fsl,imx53";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user1 {
+			label = "TestLed601";
+			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "TestLed602";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		eth {
+			label = "EthLedYe";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm070080dh6";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+			  <&clks IMX5_CLK_CKO1_PODF>,
+			  <&clks IMX5_CLK_CKO1>;
+	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	dac@60 {
+		compatible = "microchip,mcp4725";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	touchscreen@41 {
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+				MX53_PAD_EIM_EB3__GPIO2_31		0x1d5
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x1d5
+				MX53_PAD_GPIO_19__CCM_CLKO		0x1d5
+				MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK	0x1d5
+				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1d5
+				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1d5
+				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1d5
+				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1d5
+				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1d5
+				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1d5
+				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1d5
+				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1d5
+				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1d5
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1d5
+				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1d5
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1c4
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_display_gpio: display-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1d5 /* Reset */
+				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1d5 /* Interrupt */
+			>;
+		};
+
+		pinctrl_edt_ft5x06: edt-ft5x06grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x1d5 /* Reset */
+				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1d5 /* Interrupt */
+				MX53_PAD_PATA_DATA10__GPIO2_10		0x1d5 /* Wake */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
+			>;
+		};
+
+		pinctrl_lvds0: lvds0grp {
+			/* LVDS pins only have pin mux configuration */
+			fsl,pins = <
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_usb: usbgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_2__GPIO1_2		0x1d5
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1d5
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-pinfunc.h b/roms/u-boot/arch/arm/dts/imx53-pinfunc.h
new file mode 100644
index 000000000..baf710d0d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-pinfunc.h
@@ -0,0 +1,1190 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX53_PINFUNC_H
+#define __DTS_IMX53_PINFUNC_H
+
+#define IMX_PAD_SION       0x40000000
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX53_PAD_GPIO_19__KPP_COL_5				0x020 0x348 0x840 0x0 0x0
+#define MX53_PAD_GPIO_19__GPIO4_5				0x020 0x348 0x000 0x1 0x0
+#define MX53_PAD_GPIO_19__CCM_CLKO				0x020 0x348 0x000 0x2 0x0
+#define MX53_PAD_GPIO_19__SPDIF_OUT1				0x020 0x348 0x000 0x3 0x0
+#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2			0x020 0x348 0x000 0x4 0x0
+#define MX53_PAD_GPIO_19__ECSPI1_RDY				0x020 0x348 0x000 0x5 0x0
+#define MX53_PAD_GPIO_19__FEC_TDATA_3				0x020 0x348 0x000 0x6 0x0
+#define MX53_PAD_GPIO_19__SRC_INT_BOOT				0x020 0x348 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL0__KPP_COL_0				0x024 0x34c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL0__GPIO4_6				0x024 0x34c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC			0x024 0x34c 0x758 0x2 0x0
+#define MX53_PAD_KEY_COL0__UART4_TXD_MUX			0x024 0x34c 0x000 0x4 0x0
+#define MX53_PAD_KEY_COL0__ECSPI1_SCLK				0x024 0x34c 0x79c 0x5 0x0
+#define MX53_PAD_KEY_COL0__FEC_RDATA_3				0x024 0x34c 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST			0x024 0x34c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW0__KPP_ROW_0				0x028 0x350 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW0__GPIO4_7				0x028 0x350 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD			0x028 0x350 0x74c 0x2 0x0
+#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX			0x028 0x350 0x890 0x4 0x1
+#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI				0x028 0x350 0x7a4 0x5 0x0
+#define MX53_PAD_KEY_ROW0__FEC_TX_ER				0x028 0x350 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL1__KPP_COL_1				0x02c 0x354 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL1__GPIO4_8				0x02c 0x354 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS			0x02c 0x354 0x75c 0x2 0x0
+#define MX53_PAD_KEY_COL1__UART5_TXD_MUX			0x02c 0x354 0x000 0x4 0x0
+#define MX53_PAD_KEY_COL1__ECSPI1_MISO				0x02c 0x354 0x7a0 0x5 0x0
+#define MX53_PAD_KEY_COL1__FEC_RX_CLK				0x02c 0x354 0x808 0x6 0x0
+#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY			0x02c 0x354 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW1__KPP_ROW_1				0x030 0x358 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW1__GPIO4_9				0x030 0x358 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD			0x030 0x358 0x748 0x2 0x0
+#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX			0x030 0x358 0x898 0x4 0x1
+#define MX53_PAD_KEY_ROW1__ECSPI1_SS0				0x030 0x358 0x7a8 0x5 0x0
+#define MX53_PAD_KEY_ROW1__FEC_COL				0x030 0x358 0x800 0x6 0x0
+#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID			0x030 0x358 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL2__KPP_COL_2				0x034 0x35c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL2__GPIO4_10				0x034 0x35c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL2__CAN1_TXCAN				0x034 0x35c 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL2__FEC_MDIO				0x034 0x35c 0x804 0x4 0x0
+#define MX53_PAD_KEY_COL2__ECSPI1_SS1				0x034 0x35c 0x7ac 0x5 0x0
+#define MX53_PAD_KEY_COL2__FEC_RDATA_2				0x034 0x35c 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE			0x034 0x35c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW2__KPP_ROW_2				0x038 0x360 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW2__GPIO4_11				0x038 0x360 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW2__CAN1_RXCAN				0x038 0x360 0x760 0x2 0x0
+#define MX53_PAD_KEY_ROW2__FEC_MDC				0x038 0x360 0x000 0x4 0x0
+#define MX53_PAD_KEY_ROW2__ECSPI1_SS2				0x038 0x360 0x7b0 0x5 0x0
+#define MX53_PAD_KEY_ROW2__FEC_TDATA_2				0x038 0x360 0x000 0x6 0x0
+#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR			0x038 0x360 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL3__KPP_COL_3				0x03c 0x364 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL3__GPIO4_12				0x03c 0x364 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL3__USBOH3_H2_DP				0x03c 0x364 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL3__SPDIF_IN1				0x03c 0x364 0x870 0x3 0x0
+#define MX53_PAD_KEY_COL3__I2C2_SCL				0x03c 0x364 0x81c 0x4 0x0
+#define MX53_PAD_KEY_COL3__ECSPI1_SS3				0x03c 0x364 0x7b4 0x5 0x0
+#define MX53_PAD_KEY_COL3__FEC_CRS				0x03c 0x364 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK			0x03c 0x364 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW3__KPP_ROW_3				0x040 0x368 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW3__GPIO4_13				0x040 0x368 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM				0x040 0x368 0x000 0x2 0x0
+#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK			0x040 0x368 0x768 0x3 0x0
+#define MX53_PAD_KEY_ROW3__I2C2_SDA				0x040 0x368 0x820 0x4 0x0
+#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT			0x040 0x368 0x000 0x5 0x0
+#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP				0x040 0x368 0x77c 0x6 0x0
+#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0			0x040 0x368 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL4__KPP_COL_4				0x044 0x36c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL4__GPIO4_14				0x044 0x36c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL4__CAN2_TXCAN				0x044 0x36c 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL4__IPU_SISG_4				0x044 0x36c 0x000 0x3 0x0
+#define MX53_PAD_KEY_COL4__UART5_RTS				0x044 0x36c 0x894 0x4 0x0
+#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC			0x044 0x36c 0x89c 0x5 0x0
+#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1			0x044 0x36c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW4__KPP_ROW_4				0x048 0x370 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW4__GPIO4_15				0x048 0x370 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW4__CAN2_RXCAN				0x048 0x370 0x764 0x2 0x0
+#define MX53_PAD_KEY_ROW4__IPU_SISG_5				0x048 0x370 0x000 0x3 0x0
+#define MX53_PAD_KEY_ROW4__UART5_CTS				0x048 0x370 0x000 0x4 0x0
+#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR			0x048 0x370 0x000 0x5 0x0
+#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID			0x048 0x370 0x000 0x7 0x0
+#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK			0x04c 0x378 0x000 0x0 0x0
+#define MX53_PAD_DI0_DISP_CLK__GPIO4_16				0x04c 0x378 0x000 0x1 0x0
+#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR			0x04c 0x378 0x000 0x2 0x0
+#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0		0x04c 0x378 0x000 0x5 0x0
+#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0			0x04c 0x378 0x000 0x6 0x0
+#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID			0x04c 0x378 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15			0x050 0x37c 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN15__GPIO4_17				0x050 0x37c 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC			0x050 0x37c 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1		0x050 0x37c 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1			0x050 0x37c 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID			0x050 0x37c 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2				0x054 0x380 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN2__GPIO4_18				0x054 0x380 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD			0x054 0x380 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2		0x054 0x380 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2			0x054 0x380 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION			0x054 0x380 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3				0x058 0x384 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN3__GPIO4_19				0x058 0x384 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS			0x058 0x384 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3		0x058 0x384 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3			0x058 0x384 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG			0x058 0x384 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4				0x05c 0x388 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN4__GPIO4_20				0x05c 0x388 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD			0x05c 0x388 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN4__ESDHC1_WP				0x05c 0x388 0x7fc 0x3 0x0
+#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD			0x05c 0x388 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4			0x05c 0x388 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT		0x05c 0x388 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0			0x060 0x38c 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT0__GPIO4_21				0x060 0x38c 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT0__CSPI_SCLK				0x060 0x38c 0x780 0x2 0x0
+#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0		0x060 0x38c 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN		0x060 0x38c 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5			0x060 0x38c 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY			0x060 0x38c 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1			0x064 0x390 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT1__GPIO4_22				0x064 0x390 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT1__CSPI_MOSI				0x064 0x390 0x788 0x2 0x0
+#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1		0x064 0x390 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	0x064 0x390 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6			0x064 0x390 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID			0x064 0x390 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2			0x068 0x394 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT2__GPIO4_23				0x068 0x394 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT2__CSPI_MISO				0x068 0x394 0x784 0x2 0x0
+#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2		0x068 0x394 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE			0x068 0x394 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7			0x068 0x394 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE			0x068 0x394 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3			0x06c 0x398 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT3__GPIO4_24				0x06c 0x398 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT3__CSPI_SS0				0x06c 0x398 0x78c 0x2 0x0
+#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3		0x06c 0x398 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR		0x06c 0x398 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8			0x06c 0x398 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR			0x06c 0x398 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4			0x070 0x39c 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT4__GPIO4_25				0x070 0x39c 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT4__CSPI_SS1				0x070 0x39c 0x790 0x2 0x0
+#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4		0x070 0x39c 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB			0x070 0x39c 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9			0x070 0x39c 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK			0x070 0x39c 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5			0x074 0x3a0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT5__GPIO4_26				0x074 0x3a0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT5__CSPI_SS2				0x074 0x3a0 0x794 0x2 0x0
+#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5		0x074 0x3a0 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS		0x074 0x3a0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10			0x074 0x3a0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0		0x074 0x3a0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6			0x078 0x3a4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT6__GPIO4_27				0x078 0x3a4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT6__CSPI_SS3				0x078 0x3a4 0x798 0x2 0x0
+#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6		0x078 0x3a4 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE		0x078 0x3a4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11			0x078 0x3a4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1		0x078 0x3a4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7			0x07c 0x3a8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT7__GPIO4_28				0x07c 0x3a8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT7__CSPI_RDY				0x07c 0x3a8 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7		0x07c 0x3a8 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0		0x07c 0x3a8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12			0x07c 0x3a8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID			0x07c 0x3a8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8			0x080 0x3ac 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT8__GPIO4_29				0x080 0x3ac 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT8__PWM1_PWMO				0x080 0x3ac 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B			0x080 0x3ac 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1		0x080 0x3ac 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13			0x080 0x3ac 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID			0x080 0x3ac 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9			0x084 0x3b0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT9__GPIO4_30				0x084 0x3b0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT9__PWM2_PWMO				0x084 0x3b0 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B			0x084 0x3b0 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		0x084 0x3b0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14			0x084 0x3b0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0			0x084 0x3b0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10			0x088 0x3b4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT10__GPIO4_31				0x088 0x3b4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP			0x088 0x3b4 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	0x088 0x3b4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15			0x088 0x3b4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1			0x088 0x3b4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11			0x08c 0x3b8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT11__GPIO5_5				0x08c 0x3b8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT			0x08c 0x3b8 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	0x08c 0x3b8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16			0x08c 0x3b8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2			0x08c 0x3b8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12			0x090 0x3bc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT12__GPIO5_6				0x090 0x3bc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK			0x090 0x3bc 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	0x090 0x3bc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17			0x090 0x3bc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3			0x090 0x3bc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13			0x094 0x3c0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT13__GPIO5_7				0x094 0x3c0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS			0x094 0x3c0 0x754 0x3 0x0
+#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	0x094 0x3c0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18			0x094 0x3c0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4			0x094 0x3c0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14			0x098 0x3c4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT14__GPIO5_8				0x098 0x3c4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC			0x098 0x3c4 0x750 0x3 0x0
+#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	0x098 0x3c4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19			0x098 0x3c4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5			0x098 0x3c4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15			0x09c 0x3c8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT15__GPIO5_9				0x09c 0x3c8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1			0x09c 0x3c8 0x7ac 0x2 0x1
+#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1			0x09c 0x3c8 0x7c8 0x3 0x0
+#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	0x09c 0x3c8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20			0x09c 0x3c8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6			0x09c 0x3c8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16			0x0a0 0x3cc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT16__GPIO5_10				0x0a0 0x3cc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI			0x0a0 0x3cc 0x7c0 0x2 0x0
+#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC			0x0a0 0x3cc 0x758 0x3 0x1
+#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0			0x0a0 0x3cc 0x868 0x4 0x0
+#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	0x0a0 0x3cc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21			0x0a0 0x3cc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7			0x0a0 0x3cc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17			0x0a4 0x3d0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT17__GPIO5_11				0x0a4 0x3d0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO			0x0a4 0x3d0 0x7bc 0x2 0x0
+#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD			0x0a4 0x3d0 0x74c 0x3 0x1
+#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1			0x0a4 0x3d0 0x86c 0x4 0x0
+#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	0x0a4 0x3d0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22			0x0a4 0x3d0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18			0x0a8 0x3d4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT18__GPIO5_12				0x0a8 0x3d4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0			0x0a8 0x3d4 0x7c4 0x2 0x0
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS			0x0a8 0x3d4 0x75c 0x3 0x1
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS			0x0a8 0x3d4 0x73c 0x4 0x0
+#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	0x0a8 0x3d4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23			0x0a8 0x3d4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2			0x0a8 0x3d4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19			0x0ac 0x3d8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT19__GPIO5_13				0x0ac 0x3d8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK			0x0ac 0x3d8 0x7b8 0x2 0x0
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD			0x0ac 0x3d8 0x748 0x3 0x1
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC			0x0ac 0x3d8 0x738 0x4 0x0
+#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	0x0ac 0x3d8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24			0x0ac 0x3d8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3			0x0ac 0x3d8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20			0x0b0 0x3dc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT20__GPIO5_14				0x0b0 0x3dc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK			0x0b0 0x3dc 0x79c 0x2 0x1
+#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC			0x0b0 0x3dc 0x740 0x3 0x0
+#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	0x0b0 0x3dc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25			0x0b0 0x3dc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI			0x0b0 0x3dc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21			0x0b4 0x3e0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT21__GPIO5_15				0x0b4 0x3e0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI			0x0b4 0x3e0 0x7a4 0x2 0x1
+#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD			0x0b4 0x3e0 0x734 0x3 0x0
+#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0		0x0b4 0x3e0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26			0x0b4 0x3e0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO			0x0b4 0x3e0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22			0x0b8 0x3e4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT22__GPIO5_16				0x0b8 0x3e4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO			0x0b8 0x3e4 0x7a0 0x2 0x1
+#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS			0x0b8 0x3e4 0x744 0x3 0x0
+#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1		0x0b8 0x3e4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27			0x0b8 0x3e4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK			0x0b8 0x3e4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23			0x0bc 0x3e8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT23__GPIO5_17				0x0bc 0x3e8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0			0x0bc 0x3e8 0x7a8 0x2 0x1
+#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD			0x0bc 0x3e8 0x730 0x3 0x0
+#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2		0x0bc 0x3e8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28			0x0bc 0x3e8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS			0x0bc 0x3e8 0x000 0x7 0x0
+#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK			0x0c0 0x3ec 0x000 0x0 0x0
+#define MX53_PAD_CSI0_PIXCLK__GPIO5_18				0x0c0 0x3ec 0x000 0x1 0x0
+#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0			0x0c0 0x3ec 0x000 0x5 0x0
+#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29			0x0c0 0x3ec 0x000 0x6 0x0
+#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC			0x0c4 0x3f0 0x000 0x0 0x0
+#define MX53_PAD_CSI0_MCLK__GPIO5_19				0x0c4 0x3f0 0x000 0x1 0x0
+#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK			0x0c4 0x3f0 0x000 0x2 0x0
+#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1			0x0c4 0x3f0 0x000 0x5 0x0
+#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30			0x0c4 0x3f0 0x000 0x6 0x0
+#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL				0x0c4 0x3f0 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN			0x0c8 0x3f4 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DATA_EN__GPIO5_20				0x0c8 0x3f4 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2			0x0c8 0x3f4 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31			0x0c8 0x3f4 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK			0x0c8 0x3f4 0x000 0x7 0x0
+#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC			0x0cc 0x3f8 0x000 0x0 0x0
+#define MX53_PAD_CSI0_VSYNC__GPIO5_21				0x0cc 0x3f8 0x000 0x1 0x0
+#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3			0x0cc 0x3f8 0x000 0x5 0x0
+#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32			0x0cc 0x3f8 0x000 0x6 0x0
+#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0			0x0cc 0x3f8 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4			0x0d0 0x3fc 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT4__GPIO5_22				0x0d0 0x3fc 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT4__KPP_COL_5				0x0d0 0x3fc 0x840 0x2 0x1
+#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK				0x0d0 0x3fc 0x79c 0x3 0x2
+#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP			0x0d0 0x3fc 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC			0x0d0 0x3fc 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33			0x0d0 0x3fc 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1			0x0d0 0x3fc 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5			0x0d4 0x400 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT5__GPIO5_23				0x0d4 0x400 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT5__KPP_ROW_5				0x0d4 0x400 0x84c 0x2 0x0
+#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI				0x0d4 0x400 0x7a4 0x3 0x2
+#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT			0x0d4 0x400 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD			0x0d4 0x400 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34			0x0d4 0x400 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2			0x0d4 0x400 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6			0x0d8 0x404 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT6__GPIO5_24				0x0d8 0x404 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT6__KPP_COL_6				0x0d8 0x404 0x844 0x2 0x0
+#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO				0x0d8 0x404 0x7a0 0x3 0x2
+#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK			0x0d8 0x404 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS			0x0d8 0x404 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35			0x0d8 0x404 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3			0x0d8 0x404 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7			0x0dc 0x408 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT7__GPIO5_25				0x0dc 0x408 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT7__KPP_ROW_6				0x0dc 0x408 0x850 0x2 0x0
+#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0				0x0dc 0x408 0x7a8 0x3 0x2
+#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR			0x0dc 0x408 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD			0x0dc 0x408 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36			0x0dc 0x408 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4			0x0dc 0x408 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8			0x0e0 0x40c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT8__GPIO5_26				0x0e0 0x40c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT8__KPP_COL_7				0x0e0 0x40c 0x848 0x2 0x0
+#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK				0x0e0 0x40c 0x7b8 0x3 0x1
+#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC			0x0e0 0x40c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA				0x0e0 0x40c 0x818 0x5 0x0
+#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37			0x0e0 0x40c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5			0x0e0 0x40c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9			0x0e4 0x410 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT9__GPIO5_27				0x0e4 0x410 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT9__KPP_ROW_7				0x0e4 0x410 0x854 0x2 0x0
+#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI				0x0e4 0x410 0x7c0 0x3 0x1
+#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR			0x0e4 0x410 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL				0x0e4 0x410 0x814 0x5 0x0
+#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38			0x0e4 0x410 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6			0x0e4 0x410 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10			0x0e8 0x414 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT10__GPIO5_28				0x0e8 0x414 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX			0x0e8 0x414 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO			0x0e8 0x414 0x7bc 0x3 0x1
+#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC			0x0e8 0x414 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4			0x0e8 0x414 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39			0x0e8 0x414 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7			0x0e8 0x414 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11			0x0ec 0x418 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT11__GPIO5_29				0x0ec 0x418 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX			0x0ec 0x418 0x878 0x2 0x1
+#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0				0x0ec 0x418 0x7c4 0x3 0x1
+#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS			0x0ec 0x418 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5			0x0ec 0x418 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40			0x0ec 0x418 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8			0x0ec 0x418 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12			0x0f0 0x41c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT12__GPIO5_30				0x0f0 0x41c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX			0x0f0 0x41c 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		0x0f0 0x41c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6			0x0f0 0x41c 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41			0x0f0 0x41c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9			0x0f0 0x41c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13			0x0f4 0x420 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT13__GPIO5_31				0x0f4 0x420 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX			0x0f4 0x420 0x890 0x2 0x3
+#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		0x0f4 0x420 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7			0x0f4 0x420 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42			0x0f4 0x420 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10			0x0f4 0x420 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14			0x0f8 0x424 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT14__GPIO6_0				0x0f8 0x424 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX			0x0f8 0x424 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		0x0f8 0x424 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8			0x0f8 0x424 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43			0x0f8 0x424 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11			0x0f8 0x424 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15			0x0fc 0x428 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT15__GPIO6_1				0x0fc 0x428 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX			0x0fc 0x428 0x898 0x2 0x3
+#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		0x0fc 0x428 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9			0x0fc 0x428 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44			0x0fc 0x428 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12			0x0fc 0x428 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16			0x100 0x42c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT16__GPIO6_2				0x100 0x42c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT16__UART4_RTS				0x100 0x42c 0x88c 0x2 0x0
+#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		0x100 0x42c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10			0x100 0x42c 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45			0x100 0x42c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13			0x100 0x42c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17			0x104 0x430 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT17__GPIO6_3				0x104 0x430 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT17__UART4_CTS				0x104 0x430 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		0x104 0x430 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11			0x104 0x430 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46			0x104 0x430 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14			0x104 0x430 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18			0x108 0x434 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT18__GPIO6_4				0x108 0x434 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT18__UART5_RTS				0x108 0x434 0x894 0x2 0x2
+#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		0x108 0x434 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12			0x108 0x434 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47			0x108 0x434 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15			0x108 0x434 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19			0x10c 0x438 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT19__GPIO6_5				0x10c 0x438 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT19__UART5_CTS				0x10c 0x438 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		0x10c 0x438 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13			0x10c 0x438 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48			0x10c 0x438 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK			0x10c 0x438 0x000 0x7 0x0
+#define MX53_PAD_EIM_A25__EMI_WEIM_A_25				0x110 0x458 0x000 0x0 0x0
+#define MX53_PAD_EIM_A25__GPIO5_2				0x110 0x458 0x000 0x1 0x0
+#define MX53_PAD_EIM_A25__ECSPI2_RDY				0x110 0x458 0x000 0x2 0x0
+#define MX53_PAD_EIM_A25__IPU_DI1_PIN12				0x110 0x458 0x000 0x3 0x0
+#define MX53_PAD_EIM_A25__CSPI_SS1				0x110 0x458 0x790 0x4 0x1
+#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS				0x110 0x458 0x000 0x6 0x0
+#define MX53_PAD_EIM_A25__USBPHY1_BISTOK			0x110 0x458 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2				0x114 0x45c 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB2__GPIO2_30				0x114 0x45c 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK			0x114 0x45c 0x76c 0x2 0x0
+#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS			0x114 0x45c 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB2__ECSPI1_SS0				0x114 0x45c 0x7a8 0x4 0x3
+#define MX53_PAD_EIM_EB2__I2C2_SCL				0x114 0x45c 0x81c 0x5 0x1
+#define MX53_PAD_EIM_D16__EMI_WEIM_D_16				0x118 0x460 0x000 0x0 0x0
+#define MX53_PAD_EIM_D16__GPIO3_16				0x118 0x460 0x000 0x1 0x0
+#define MX53_PAD_EIM_D16__IPU_DI0_PIN5				0x118 0x460 0x000 0x2 0x0
+#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK			0x118 0x460 0x000 0x3 0x0
+#define MX53_PAD_EIM_D16__ECSPI1_SCLK				0x118 0x460 0x79c 0x4 0x3
+#define MX53_PAD_EIM_D16__I2C2_SDA				0x118 0x460 0x820 0x5 0x1
+#define MX53_PAD_EIM_D17__EMI_WEIM_D_17				0x11c 0x464 0x000 0x0 0x0
+#define MX53_PAD_EIM_D17__GPIO3_17				0x11c 0x464 0x000 0x1 0x0
+#define MX53_PAD_EIM_D17__IPU_DI0_PIN6				0x11c 0x464 0x000 0x2 0x0
+#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN			0x11c 0x464 0x830 0x3 0x0
+#define MX53_PAD_EIM_D17__ECSPI1_MISO				0x11c 0x464 0x7a0 0x4 0x3
+#define MX53_PAD_EIM_D17__I2C3_SCL				0x11c 0x464 0x824 0x5 0x0
+#define MX53_PAD_EIM_D18__EMI_WEIM_D_18				0x120 0x468 0x000 0x0 0x0
+#define MX53_PAD_EIM_D18__GPIO3_18				0x120 0x468 0x000 0x1 0x0
+#define MX53_PAD_EIM_D18__IPU_DI0_PIN7				0x120 0x468 0x000 0x2 0x0
+#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO			0x120 0x468 0x830 0x3 0x1
+#define MX53_PAD_EIM_D18__ECSPI1_MOSI				0x120 0x468 0x7a4 0x4 0x3
+#define MX53_PAD_EIM_D18__I2C3_SDA				0x120 0x468 0x828 0x5 0x0
+#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS				0x120 0x468 0x000 0x6 0x0
+#define MX53_PAD_EIM_D19__EMI_WEIM_D_19				0x124 0x46c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D19__GPIO3_19				0x124 0x46c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D19__IPU_DI0_PIN8				0x124 0x46c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS			0x124 0x46c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D19__ECSPI1_SS1				0x124 0x46c 0x7ac 0x4 0x2
+#define MX53_PAD_EIM_D19__EPIT1_EPITO				0x124 0x46c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D19__UART1_CTS				0x124 0x46c 0x000 0x6 0x0
+#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC			0x124 0x46c 0x8a4 0x7 0x0
+#define MX53_PAD_EIM_D20__EMI_WEIM_D_20				0x128 0x470 0x000 0x0 0x0
+#define MX53_PAD_EIM_D20__GPIO3_20				0x128 0x470 0x000 0x1 0x0
+#define MX53_PAD_EIM_D20__IPU_DI0_PIN16				0x128 0x470 0x000 0x2 0x0
+#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS			0x128 0x470 0x000 0x3 0x0
+#define MX53_PAD_EIM_D20__CSPI_SS0				0x128 0x470 0x78c 0x4 0x1
+#define MX53_PAD_EIM_D20__EPIT2_EPITO				0x128 0x470 0x000 0x5 0x0
+#define MX53_PAD_EIM_D20__UART1_RTS				0x128 0x470 0x874 0x6 0x1
+#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR			0x128 0x470 0x000 0x7 0x0
+#define MX53_PAD_EIM_D21__EMI_WEIM_D_21				0x12c 0x474 0x000 0x0 0x0
+#define MX53_PAD_EIM_D21__GPIO3_21				0x12c 0x474 0x000 0x1 0x0
+#define MX53_PAD_EIM_D21__IPU_DI0_PIN17				0x12c 0x474 0x000 0x2 0x0
+#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK			0x12c 0x474 0x000 0x3 0x0
+#define MX53_PAD_EIM_D21__CSPI_SCLK				0x12c 0x474 0x780 0x4 0x1
+#define MX53_PAD_EIM_D21__I2C1_SCL				0x12c 0x474 0x814 0x5 0x1
+#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC			0x12c 0x474 0x89c 0x6 0x1
+#define MX53_PAD_EIM_D22__EMI_WEIM_D_22				0x130 0x478 0x000 0x0 0x0
+#define MX53_PAD_EIM_D22__GPIO3_22				0x130 0x478 0x000 0x1 0x0
+#define MX53_PAD_EIM_D22__IPU_DI0_PIN1				0x130 0x478 0x000 0x2 0x0
+#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN			0x130 0x478 0x82c 0x3 0x0
+#define MX53_PAD_EIM_D22__CSPI_MISO				0x130 0x478 0x784 0x4 0x1
+#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR			0x130 0x478 0x000 0x6 0x0
+#define MX53_PAD_EIM_D23__EMI_WEIM_D_23				0x134 0x47c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D23__GPIO3_23				0x134 0x47c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D23__UART3_CTS				0x134 0x47c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D23__UART1_DCD				0x134 0x47c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS				0x134 0x47c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN2				0x134 0x47c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN			0x134 0x47c 0x834 0x6 0x0
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN14				0x134 0x47c 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3				0x138 0x480 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB3__GPIO2_31				0x138 0x480 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB3__UART3_RTS				0x138 0x480 0x884 0x2 0x1
+#define MX53_PAD_EIM_EB3__UART1_RI				0x138 0x480 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3				0x138 0x480 0x000 0x5 0x0
+#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC			0x138 0x480 0x838 0x6 0x0
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16				0x138 0x480 0x000 0x7 0x0
+#define MX53_PAD_EIM_D24__EMI_WEIM_D_24				0x13c 0x484 0x000 0x0 0x0
+#define MX53_PAD_EIM_D24__GPIO3_24				0x13c 0x484 0x000 0x1 0x0
+#define MX53_PAD_EIM_D24__UART3_TXD_MUX				0x13c 0x484 0x000 0x2 0x0
+#define MX53_PAD_EIM_D24__ECSPI1_SS2				0x13c 0x484 0x7b0 0x3 0x1
+#define MX53_PAD_EIM_D24__CSPI_SS2				0x13c 0x484 0x794 0x4 0x1
+#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS			0x13c 0x484 0x754 0x5 0x1
+#define MX53_PAD_EIM_D24__ECSPI2_SS2				0x13c 0x484 0x000 0x6 0x0
+#define MX53_PAD_EIM_D24__UART1_DTR				0x13c 0x484 0x000 0x7 0x0
+#define MX53_PAD_EIM_D25__EMI_WEIM_D_25				0x140 0x488 0x000 0x0 0x0
+#define MX53_PAD_EIM_D25__GPIO3_25				0x140 0x488 0x000 0x1 0x0
+#define MX53_PAD_EIM_D25__UART3_RXD_MUX				0x140 0x488 0x888 0x2 0x1
+#define MX53_PAD_EIM_D25__ECSPI1_SS3				0x140 0x488 0x7b4 0x3 0x1
+#define MX53_PAD_EIM_D25__CSPI_SS3				0x140 0x488 0x798 0x4 0x1
+#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC			0x140 0x488 0x750 0x5 0x1
+#define MX53_PAD_EIM_D25__ECSPI2_SS3				0x140 0x488 0x000 0x6 0x0
+#define MX53_PAD_EIM_D25__UART1_DSR				0x140 0x488 0x000 0x7 0x0
+#define MX53_PAD_EIM_D26__EMI_WEIM_D_26				0x144 0x48c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D26__GPIO3_26				0x144 0x48c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D26__UART2_TXD_MUX				0x144 0x48c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D26__FIRI_RXD				0x144 0x48c 0x80c 0x3 0x0
+#define MX53_PAD_EIM_D26__IPU_CSI0_D_1				0x144 0x48c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D26__IPU_DI1_PIN11				0x144 0x48c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D26__IPU_SISG_2				0x144 0x48c 0x000 0x6 0x0
+#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22			0x144 0x48c 0x000 0x7 0x0
+#define MX53_PAD_EIM_D27__EMI_WEIM_D_27				0x148 0x490 0x000 0x0 0x0
+#define MX53_PAD_EIM_D27__GPIO3_27				0x148 0x490 0x000 0x1 0x0
+#define MX53_PAD_EIM_D27__UART2_RXD_MUX				0x148 0x490 0x880 0x2 0x1
+#define MX53_PAD_EIM_D27__FIRI_TXD				0x148 0x490 0x000 0x3 0x0
+#define MX53_PAD_EIM_D27__IPU_CSI0_D_0				0x148 0x490 0x000 0x4 0x0
+#define MX53_PAD_EIM_D27__IPU_DI1_PIN13				0x148 0x490 0x000 0x5 0x0
+#define MX53_PAD_EIM_D27__IPU_SISG_3				0x148 0x490 0x000 0x6 0x0
+#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23			0x148 0x490 0x000 0x7 0x0
+#define MX53_PAD_EIM_D28__EMI_WEIM_D_28				0x14c 0x494 0x000 0x0 0x0
+#define MX53_PAD_EIM_D28__GPIO3_28				0x14c 0x494 0x000 0x1 0x0
+#define MX53_PAD_EIM_D28__UART2_CTS				0x14c 0x494 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO			0x14c 0x494 0x82c 0x3 0x1
+#define MX53_PAD_EIM_D28__CSPI_MOSI				0x14c 0x494 0x788 0x4 0x1
+#define MX53_PAD_EIM_D28__I2C1_SDA				0x14c 0x494 0x818 0x5 0x1
+#define MX53_PAD_EIM_D28__IPU_EXT_TRIG				0x14c 0x494 0x000 0x6 0x0
+#define MX53_PAD_EIM_D28__IPU_DI0_PIN13				0x14c 0x494 0x000 0x7 0x0
+#define MX53_PAD_EIM_D29__EMI_WEIM_D_29				0x150 0x498 0x000 0x0 0x0
+#define MX53_PAD_EIM_D29__GPIO3_29				0x150 0x498 0x000 0x1 0x0
+#define MX53_PAD_EIM_D29__UART2_RTS				0x150 0x498 0x87c 0x2 0x1
+#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS			0x150 0x498 0x000 0x3 0x0
+#define MX53_PAD_EIM_D29__CSPI_SS0				0x150 0x498 0x78c 0x4 0x2
+#define MX53_PAD_EIM_D29__IPU_DI1_PIN15				0x150 0x498 0x000 0x5 0x0
+#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC			0x150 0x498 0x83c 0x6 0x0
+#define MX53_PAD_EIM_D29__IPU_DI0_PIN14				0x150 0x498 0x000 0x7 0x0
+#define MX53_PAD_EIM_D30__EMI_WEIM_D_30				0x154 0x49c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D30__GPIO3_30				0x154 0x49c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D30__UART3_CTS				0x154 0x49c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D30__IPU_CSI0_D_3				0x154 0x49c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D30__IPU_DI0_PIN11				0x154 0x49c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21			0x154 0x49c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC			0x154 0x49c 0x8a0 0x6 0x0
+#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC			0x154 0x49c 0x8a4 0x7 0x1
+#define MX53_PAD_EIM_D31__EMI_WEIM_D_31				0x158 0x4a0 0x000 0x0 0x0
+#define MX53_PAD_EIM_D31__GPIO3_31				0x158 0x4a0 0x000 0x1 0x0
+#define MX53_PAD_EIM_D31__UART3_RTS				0x158 0x4a0 0x884 0x2 0x3
+#define MX53_PAD_EIM_D31__IPU_CSI0_D_2				0x158 0x4a0 0x000 0x3 0x0
+#define MX53_PAD_EIM_D31__IPU_DI0_PIN12				0x158 0x4a0 0x000 0x4 0x0
+#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20			0x158 0x4a0 0x000 0x5 0x0
+#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR			0x158 0x4a0 0x000 0x6 0x0
+#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR			0x158 0x4a0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A24__EMI_WEIM_A_24				0x15c 0x4a8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A24__GPIO5_4				0x15c 0x4a8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19			0x15c 0x4a8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A24__IPU_CSI1_D_19				0x15c 0x4a8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A24__IPU_SISG_2				0x15c 0x4a8 0x000 0x6 0x0
+#define MX53_PAD_EIM_A24__USBPHY2_BVALID			0x15c 0x4a8 0x000 0x7 0x0
+#define MX53_PAD_EIM_A23__EMI_WEIM_A_23				0x160 0x4ac 0x000 0x0 0x0
+#define MX53_PAD_EIM_A23__GPIO6_6				0x160 0x4ac 0x000 0x1 0x0
+#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18			0x160 0x4ac 0x000 0x2 0x0
+#define MX53_PAD_EIM_A23__IPU_CSI1_D_18				0x160 0x4ac 0x000 0x3 0x0
+#define MX53_PAD_EIM_A23__IPU_SISG_3				0x160 0x4ac 0x000 0x6 0x0
+#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION			0x160 0x4ac 0x000 0x7 0x0
+#define MX53_PAD_EIM_A22__EMI_WEIM_A_22				0x164 0x4b0 0x000 0x0 0x0
+#define MX53_PAD_EIM_A22__GPIO2_16				0x164 0x4b0 0x000 0x1 0x0
+#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17			0x164 0x4b0 0x000 0x2 0x0
+#define MX53_PAD_EIM_A22__IPU_CSI1_D_17				0x164 0x4b0 0x000 0x3 0x0
+#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7				0x164 0x4b0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A21__EMI_WEIM_A_21				0x168 0x4b4 0x000 0x0 0x0
+#define MX53_PAD_EIM_A21__GPIO2_17				0x168 0x4b4 0x000 0x1 0x0
+#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16			0x168 0x4b4 0x000 0x2 0x0
+#define MX53_PAD_EIM_A21__IPU_CSI1_D_16				0x168 0x4b4 0x000 0x3 0x0
+#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6				0x168 0x4b4 0x000 0x7 0x0
+#define MX53_PAD_EIM_A20__EMI_WEIM_A_20				0x16c 0x4b8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A20__GPIO2_18				0x16c 0x4b8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15			0x16c 0x4b8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A20__IPU_CSI1_D_15				0x16c 0x4b8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5				0x16c 0x4b8 0x000 0x7 0x0
+#define MX53_PAD_EIM_A19__EMI_WEIM_A_19				0x170 0x4bc 0x000 0x0 0x0
+#define MX53_PAD_EIM_A19__GPIO2_19				0x170 0x4bc 0x000 0x1 0x0
+#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14			0x170 0x4bc 0x000 0x2 0x0
+#define MX53_PAD_EIM_A19__IPU_CSI1_D_14				0x170 0x4bc 0x000 0x3 0x0
+#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4				0x170 0x4bc 0x000 0x7 0x0
+#define MX53_PAD_EIM_A18__EMI_WEIM_A_18				0x174 0x4c0 0x000 0x0 0x0
+#define MX53_PAD_EIM_A18__GPIO2_20				0x174 0x4c0 0x000 0x1 0x0
+#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13			0x174 0x4c0 0x000 0x2 0x0
+#define MX53_PAD_EIM_A18__IPU_CSI1_D_13				0x174 0x4c0 0x000 0x3 0x0
+#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3				0x174 0x4c0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A17__EMI_WEIM_A_17				0x178 0x4c4 0x000 0x0 0x0
+#define MX53_PAD_EIM_A17__GPIO2_21				0x178 0x4c4 0x000 0x1 0x0
+#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12			0x178 0x4c4 0x000 0x2 0x0
+#define MX53_PAD_EIM_A17__IPU_CSI1_D_12				0x178 0x4c4 0x000 0x3 0x0
+#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2				0x178 0x4c4 0x000 0x7 0x0
+#define MX53_PAD_EIM_A16__EMI_WEIM_A_16				0x17c 0x4c8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A16__GPIO2_22				0x17c 0x4c8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK			0x17c 0x4c8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK			0x17c 0x4c8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1				0x17c 0x4c8 0x000 0x7 0x0
+#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0				0x180 0x4cc 0x000 0x0 0x0
+#define MX53_PAD_EIM_CS0__GPIO2_23				0x180 0x4cc 0x000 0x1 0x0
+#define MX53_PAD_EIM_CS0__ECSPI2_SCLK				0x180 0x4cc 0x7b8 0x2 0x2
+#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5				0x180 0x4cc 0x000 0x3 0x0
+#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1				0x184 0x4d0 0x000 0x0 0x0
+#define MX53_PAD_EIM_CS1__GPIO2_24				0x184 0x4d0 0x000 0x1 0x0
+#define MX53_PAD_EIM_CS1__ECSPI2_MOSI				0x184 0x4d0 0x7c0 0x2 0x2
+#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6				0x184 0x4d0 0x000 0x3 0x0
+#define MX53_PAD_EIM_OE__EMI_WEIM_OE				0x188 0x4d4 0x000 0x0 0x0
+#define MX53_PAD_EIM_OE__GPIO2_25				0x188 0x4d4 0x000 0x1 0x0
+#define MX53_PAD_EIM_OE__ECSPI2_MISO				0x188 0x4d4 0x7bc 0x2 0x2
+#define MX53_PAD_EIM_OE__IPU_DI1_PIN7				0x188 0x4d4 0x000 0x3 0x0
+#define MX53_PAD_EIM_OE__USBPHY2_IDDIG				0x188 0x4d4 0x000 0x7 0x0
+#define MX53_PAD_EIM_RW__EMI_WEIM_RW				0x18c 0x4d8 0x000 0x0 0x0
+#define MX53_PAD_EIM_RW__GPIO2_26				0x18c 0x4d8 0x000 0x1 0x0
+#define MX53_PAD_EIM_RW__ECSPI2_SS0				0x18c 0x4d8 0x7c4 0x2 0x2
+#define MX53_PAD_EIM_RW__IPU_DI1_PIN8				0x18c 0x4d8 0x000 0x3 0x0
+#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT			0x18c 0x4d8 0x000 0x7 0x0
+#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA				0x190 0x4dc 0x000 0x0 0x0
+#define MX53_PAD_EIM_LBA__GPIO2_27				0x190 0x4dc 0x000 0x1 0x0
+#define MX53_PAD_EIM_LBA__ECSPI2_SS1				0x190 0x4dc 0x7c8 0x2 0x1
+#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17				0x190 0x4dc 0x000 0x3 0x0
+#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0				0x190 0x4dc 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0				0x194 0x4e4 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB0__GPIO2_28				0x194 0x4e4 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11			0x194 0x4e4 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11				0x194 0x4e4 0x000 0x4 0x0
+#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY				0x194 0x4e4 0x810 0x5 0x0
+#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7				0x194 0x4e4 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1				0x198 0x4e8 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB1__GPIO2_29				0x198 0x4e8 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10			0x198 0x4e8 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10				0x198 0x4e8 0x000 0x4 0x0
+#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6				0x198 0x4e8 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0			0x19c 0x4ec 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA0__GPIO3_0				0x19c 0x4ec 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9			0x19c 0x4ec 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9				0x19c 0x4ec 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5				0x19c 0x4ec 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1			0x1a0 0x4f0 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA1__GPIO3_1				0x1a0 0x4f0 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8			0x1a0 0x4f0 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8				0x1a0 0x4f0 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4				0x1a0 0x4f0 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2			0x1a4 0x4f4 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA2__GPIO3_2				0x1a4 0x4f4 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7			0x1a4 0x4f4 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7				0x1a4 0x4f4 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3				0x1a4 0x4f4 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3			0x1a8 0x4f8 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA3__GPIO3_3				0x1a8 0x4f8 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6			0x1a8 0x4f8 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6				0x1a8 0x4f8 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2				0x1a8 0x4f8 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4			0x1ac 0x4fc 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA4__GPIO3_4				0x1ac 0x4fc 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5			0x1ac 0x4fc 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5				0x1ac 0x4fc 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7				0x1ac 0x4fc 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5			0x1b0 0x500 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA5__GPIO3_5				0x1b0 0x500 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4			0x1b0 0x500 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4				0x1b0 0x500 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6				0x1b0 0x500 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6			0x1b4 0x504 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA6__GPIO3_6				0x1b4 0x504 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3			0x1b4 0x504 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3				0x1b4 0x504 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5				0x1b4 0x504 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7			0x1b8 0x508 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA7__GPIO3_7				0x1b8 0x508 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2			0x1b8 0x508 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2				0x1b8 0x508 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4				0x1b8 0x508 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8			0x1bc 0x50c 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA8__GPIO3_8				0x1bc 0x50c 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1			0x1bc 0x50c 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1				0x1bc 0x50c 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3				0x1bc 0x50c 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9			0x1c0 0x510 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA9__GPIO3_9				0x1c0 0x510 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0			0x1c0 0x510 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0				0x1c0 0x510 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2				0x1c0 0x510 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10			0x1c4 0x514 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA10__GPIO3_10				0x1c4 0x514 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15			0x1c4 0x514 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN			0x1c4 0x514 0x834 0x4 0x1
+#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1			0x1c4 0x514 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11			0x1c8 0x518 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA11__GPIO3_11				0x1c8 0x518 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2				0x1c8 0x518 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC			0x1c8 0x518 0x838 0x4 0x1
+#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12			0x1cc 0x51c 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA12__GPIO3_12				0x1cc 0x51c 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3				0x1cc 0x51c 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC			0x1cc 0x51c 0x83c 0x4 0x1
+#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13			0x1d0 0x520 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA13__GPIO3_13				0x1d0 0x520 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS			0x1d0 0x520 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK			0x1d0 0x520 0x76c 0x4 0x1
+#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14			0x1d4 0x524 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA14__GPIO3_14				0x1d4 0x524 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS			0x1d4 0x524 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK			0x1d4 0x524 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15			0x1d8 0x528 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA15__GPIO3_15				0x1d8 0x528 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1				0x1d8 0x528 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4				0x1d8 0x528 0x000 0x4 0x0
+#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B			0x1dc 0x52c 0x000 0x0 0x0
+#define MX53_PAD_NANDF_WE_B__GPIO6_12				0x1dc 0x52c 0x000 0x1 0x0
+#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B			0x1e0 0x530 0x000 0x0 0x0
+#define MX53_PAD_NANDF_RE_B__GPIO6_13				0x1e0 0x530 0x000 0x1 0x0
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT			0x1e4 0x534 0x000 0x0 0x0
+#define MX53_PAD_EIM_WAIT__GPIO5_0				0x1e4 0x534 0x000 0x1 0x0
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B			0x1e4 0x534 0x000 0x2 0x0
+#define MX53_PAD_LVDS1_TX3_P__GPIO6_22				0x1ec 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3			0x1ec 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX2_P__GPIO6_24				0x1f0 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2			0x1f0 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_CLK_P__GPIO6_26				0x1f4 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK			0x1f4 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX1_P__GPIO6_28				0x1f8 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1			0x1f8 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX0_P__GPIO6_30				0x1fc 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0			0x1fc 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX3_P__GPIO7_22				0x200 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3			0x200 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_CLK_P__GPIO7_24				0x204 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK			0x204 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX2_P__GPIO7_26				0x208 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2			0x208 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX1_P__GPIO7_28				0x20c 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1			0x20c 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX0_P__GPIO7_30				0x210 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0			0x210 0x000 0x000 0x1 0x0
+#define MX53_PAD_GPIO_10__GPIO4_0				0x214 0x540 0x000 0x0 0x0
+#define MX53_PAD_GPIO_10__OSC32k_32K_OUT			0x214 0x540 0x000 0x1 0x0
+#define MX53_PAD_GPIO_11__GPIO4_1				0x218 0x544 0x000 0x0 0x0
+#define MX53_PAD_GPIO_12__GPIO4_2				0x21c 0x548 0x000 0x0 0x0
+#define MX53_PAD_GPIO_13__GPIO4_3				0x220 0x54c 0x000 0x0 0x0
+#define MX53_PAD_GPIO_14__GPIO4_4				0x224 0x550 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE			0x228 0x5a0 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CLE__GPIO6_7				0x228 0x5a0 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0			0x228 0x5a0 0x000 0x7 0x0
+#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE			0x22c 0x5a4 0x000 0x0 0x0
+#define MX53_PAD_NANDF_ALE__GPIO6_8				0x22c 0x5a4 0x000 0x1 0x0
+#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1			0x22c 0x5a4 0x000 0x7 0x0
+#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B			0x230 0x5a8 0x000 0x0 0x0
+#define MX53_PAD_NANDF_WP_B__GPIO6_9				0x230 0x5a8 0x000 0x1 0x0
+#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2			0x230 0x5a8 0x000 0x7 0x0
+#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0			0x234 0x5ac 0x000 0x0 0x0
+#define MX53_PAD_NANDF_RB0__GPIO6_10				0x234 0x5ac 0x000 0x1 0x0
+#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3			0x234 0x5ac 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0			0x238 0x5b0 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS0__GPIO6_11				0x238 0x5b0 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4			0x238 0x5b0 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1			0x23c 0x5b4 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS1__GPIO6_14				0x23c 0x5b4 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS1__MLB_MLBCLK				0x23c 0x5b4 0x858 0x6 0x0
+#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5			0x23c 0x5b4 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2			0x240 0x5b8 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS2__GPIO6_15				0x240 0x5b8 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS2__IPU_SISG_0				0x240 0x5b8 0x000 0x2 0x0
+#define MX53_PAD_NANDF_CS2__ESAI1_TX0				0x240 0x5b8 0x7e4 0x3 0x0
+#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE			0x240 0x5b8 0x000 0x4 0x0
+#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK			0x240 0x5b8 0x000 0x5 0x0
+#define MX53_PAD_NANDF_CS2__MLB_MLBSIG				0x240 0x5b8 0x860 0x6 0x0
+#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6			0x240 0x5b8 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3			0x244 0x5bc 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS3__GPIO6_16				0x244 0x5bc 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS3__IPU_SISG_1				0x244 0x5bc 0x000 0x2 0x0
+#define MX53_PAD_NANDF_CS3__ESAI1_TX1				0x244 0x5bc 0x7e8 0x3 0x0
+#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26			0x244 0x5bc 0x000 0x4 0x0
+#define MX53_PAD_NANDF_CS3__MLB_MLBDAT				0x244 0x5bc 0x85c 0x6 0x0
+#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7			0x244 0x5bc 0x000 0x7 0x0
+#define MX53_PAD_FEC_MDIO__FEC_MDIO				0x248 0x5c4 0x804 0x0 0x1
+#define MX53_PAD_FEC_MDIO__GPIO1_22				0x248 0x5c4 0x000 0x1 0x0
+#define MX53_PAD_FEC_MDIO__ESAI1_SCKR				0x248 0x5c4 0x7dc 0x2 0x0
+#define MX53_PAD_FEC_MDIO__FEC_COL				0x248 0x5c4 0x800 0x3 0x1
+#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2			0x248 0x5c4 0x000 0x4 0x0
+#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3		0x248 0x5c4 0x000 0x5 0x0
+#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49			0x248 0x5c4 0x000 0x6 0x0
+#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK			0x24c 0x5c8 0x000 0x0 0x0
+#define MX53_PAD_FEC_REF_CLK__GPIO1_23				0x24c 0x5c8 0x000 0x1 0x0
+#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR				0x24c 0x5c8 0x7cc 0x2 0x0
+#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4		0x24c 0x5c8 0x000 0x5 0x0
+#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50			0x24c 0x5c8 0x000 0x6 0x0
+#define MX53_PAD_FEC_RX_ER__FEC_RX_ER				0x250 0x5cc 0x000 0x0 0x0
+#define MX53_PAD_FEC_RX_ER__GPIO1_24				0x250 0x5cc 0x000 0x1 0x0
+#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR				0x250 0x5cc 0x7d4 0x2 0x0
+#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK				0x250 0x5cc 0x808 0x3 0x1
+#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3			0x250 0x5cc 0x000 0x4 0x0
+#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV				0x254 0x5d0 0x000 0x0 0x0
+#define MX53_PAD_FEC_CRS_DV__GPIO1_25				0x254 0x5d0 0x000 0x1 0x0
+#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT				0x254 0x5d0 0x7e0 0x2 0x0
+#define MX53_PAD_FEC_RXD1__FEC_RDATA_1				0x258 0x5d4 0x000 0x0 0x0
+#define MX53_PAD_FEC_RXD1__GPIO1_26				0x258 0x5d4 0x000 0x1 0x0
+#define MX53_PAD_FEC_RXD1__ESAI1_FST				0x258 0x5d4 0x7d0 0x2 0x0
+#define MX53_PAD_FEC_RXD1__MLB_MLBSIG				0x258 0x5d4 0x860 0x3 0x1
+#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1			0x258 0x5d4 0x000 0x4 0x0
+#define MX53_PAD_FEC_RXD0__FEC_RDATA_0				0x25c 0x5d8 0x000 0x0 0x0
+#define MX53_PAD_FEC_RXD0__GPIO1_27				0x25c 0x5d8 0x000 0x1 0x0
+#define MX53_PAD_FEC_RXD0__ESAI1_HCKT				0x25c 0x5d8 0x7d8 0x2 0x0
+#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT			0x25c 0x5d8 0x000 0x3 0x0
+#define MX53_PAD_FEC_TX_EN__FEC_TX_EN				0x260 0x5dc 0x000 0x0 0x0
+#define MX53_PAD_FEC_TX_EN__GPIO1_28				0x260 0x5dc 0x000 0x1 0x0
+#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2			0x260 0x5dc 0x7f0 0x2 0x0
+#define MX53_PAD_FEC_TXD1__FEC_TDATA_1				0x264 0x5e0 0x000 0x0 0x0
+#define MX53_PAD_FEC_TXD1__GPIO1_29				0x264 0x5e0 0x000 0x1 0x0
+#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3			0x264 0x5e0 0x7ec 0x2 0x0
+#define MX53_PAD_FEC_TXD1__MLB_MLBCLK				0x264 0x5e0 0x858 0x3 0x1
+#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK			0x264 0x5e0 0x000 0x4 0x0
+#define MX53_PAD_FEC_TXD0__FEC_TDATA_0				0x268 0x5e4 0x000 0x0 0x0
+#define MX53_PAD_FEC_TXD0__GPIO1_30				0x268 0x5e4 0x000 0x1 0x0
+#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1			0x268 0x5e4 0x7f4 0x2 0x0
+#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0			0x268 0x5e4 0x000 0x7 0x0
+#define MX53_PAD_FEC_MDC__FEC_MDC				0x26c 0x5e8 0x000 0x0 0x0
+#define MX53_PAD_FEC_MDC__GPIO1_31				0x26c 0x5e8 0x000 0x1 0x0
+#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0				0x26c 0x5e8 0x7f8 0x2 0x0
+#define MX53_PAD_FEC_MDC__MLB_MLBDAT				0x26c 0x5e8 0x85c 0x3 0x1
+#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG		0x26c 0x5e8 0x000 0x4 0x0
+#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1			0x26c 0x5e8 0x000 0x7 0x0
+#define MX53_PAD_PATA_DIOW__PATA_DIOW				0x270 0x5f0 0x000 0x0 0x0
+#define MX53_PAD_PATA_DIOW__GPIO6_17				0x270 0x5f0 0x000 0x1 0x0
+#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX			0x270 0x5f0 0x000 0x3 0x0
+#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2			0x270 0x5f0 0x000 0x7 0x0
+#define MX53_PAD_PATA_DMACK__PATA_DMACK				0x274 0x5f4 0x000 0x0 0x0
+#define MX53_PAD_PATA_DMACK__GPIO6_18				0x274 0x5f4 0x000 0x1 0x0
+#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX			0x274 0x5f4 0x878 0x3 0x3
+#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3			0x274 0x5f4 0x000 0x7 0x0
+#define MX53_PAD_PATA_DMARQ__PATA_DMARQ				0x278 0x5f8 0x000 0x0 0x0
+#define MX53_PAD_PATA_DMARQ__GPIO7_0				0x278 0x5f8 0x000 0x1 0x0
+#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX			0x278 0x5f8 0x000 0x3 0x0
+#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0			0x278 0x5f8 0x000 0x5 0x0
+#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4			0x278 0x5f8 0x000 0x7 0x0
+#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN			0x27c 0x5fc 0x000 0x0 0x0
+#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1			0x27c 0x5fc 0x000 0x1 0x0
+#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX			0x27c 0x5fc 0x880 0x3 0x3
+#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1			0x27c 0x5fc 0x000 0x5 0x0
+#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5		0x27c 0x5fc 0x000 0x7 0x0
+#define MX53_PAD_PATA_INTRQ__PATA_INTRQ				0x280 0x600 0x000 0x0 0x0
+#define MX53_PAD_PATA_INTRQ__GPIO7_2				0x280 0x600 0x000 0x1 0x0
+#define MX53_PAD_PATA_INTRQ__UART2_CTS				0x280 0x600 0x000 0x3 0x0
+#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN				0x280 0x600 0x000 0x4 0x0
+#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2			0x280 0x600 0x000 0x5 0x0
+#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6			0x280 0x600 0x000 0x7 0x0
+#define MX53_PAD_PATA_DIOR__PATA_DIOR				0x284 0x604 0x000 0x0 0x0
+#define MX53_PAD_PATA_DIOR__GPIO7_3				0x284 0x604 0x000 0x1 0x0
+#define MX53_PAD_PATA_DIOR__UART2_RTS				0x284 0x604 0x87c 0x3 0x3
+#define MX53_PAD_PATA_DIOR__CAN1_RXCAN				0x284 0x604 0x760 0x4 0x1
+#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7			0x284 0x604 0x000 0x7 0x0
+#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		0x288 0x608 0x000 0x0 0x0
+#define MX53_PAD_PATA_RESET_B__GPIO7_4				0x288 0x608 0x000 0x1 0x0
+#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD			0x288 0x608 0x000 0x2 0x0
+#define MX53_PAD_PATA_RESET_B__UART1_CTS			0x288 0x608 0x000 0x3 0x0
+#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN			0x288 0x608 0x000 0x4 0x0
+#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		0x288 0x608 0x000 0x7 0x0
+#define MX53_PAD_PATA_IORDY__PATA_IORDY				0x28c 0x60c 0x000 0x0 0x0
+#define MX53_PAD_PATA_IORDY__GPIO7_5				0x28c 0x60c 0x000 0x1 0x0
+#define MX53_PAD_PATA_IORDY__ESDHC3_CLK				0x28c 0x60c 0x000 0x2 0x0
+#define MX53_PAD_PATA_IORDY__UART1_RTS				0x28c 0x60c 0x874 0x3 0x3
+#define MX53_PAD_PATA_IORDY__CAN2_RXCAN				0x28c 0x60c 0x764 0x4 0x1
+#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1			0x28c 0x60c 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_0__PATA_DA_0				0x290 0x610 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_0__GPIO7_6				0x290 0x610 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_0__ESDHC3_RST				0x290 0x610 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_0__OWIRE_LINE				0x290 0x610 0x864 0x4 0x0
+#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2			0x290 0x610 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_1__PATA_DA_1				0x294 0x614 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_1__GPIO7_7				0x294 0x614 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_1__ESDHC4_CMD				0x294 0x614 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_1__UART3_CTS				0x294 0x614 0x000 0x4 0x0
+#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3			0x294 0x614 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_2__PATA_DA_2				0x298 0x618 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_2__GPIO7_8				0x298 0x618 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_2__ESDHC4_CLK				0x298 0x618 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_2__UART3_RTS				0x298 0x618 0x884 0x4 0x5
+#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4			0x298 0x618 0x000 0x7 0x0
+#define MX53_PAD_PATA_CS_0__PATA_CS_0				0x29c 0x61c 0x000 0x0 0x0
+#define MX53_PAD_PATA_CS_0__GPIO7_9				0x29c 0x61c 0x000 0x1 0x0
+#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX			0x29c 0x61c 0x000 0x4 0x0
+#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5			0x29c 0x61c 0x000 0x7 0x0
+#define MX53_PAD_PATA_CS_1__PATA_CS_1				0x2a0 0x620 0x000 0x0 0x0
+#define MX53_PAD_PATA_CS_1__GPIO7_10				0x2a0 0x620 0x000 0x1 0x0
+#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX			0x2a0 0x620 0x888 0x4 0x3
+#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6			0x2a0 0x620 0x000 0x7 0x0
+#define MX53_PAD_PATA_DATA0__PATA_DATA_0			0x2a4 0x628 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA0__GPIO2_0				0x2a4 0x628 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0			0x2a4 0x628 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4			0x2a4 0x628 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0		0x2a4 0x628 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0			0x2a4 0x628 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7			0x2a4 0x628 0x000 0x7 0x0
+#define MX53_PAD_PATA_DATA1__PATA_DATA_1			0x2a8 0x62c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA1__GPIO2_1				0x2a8 0x62c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1			0x2a8 0x62c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5			0x2a8 0x62c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1		0x2a8 0x62c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1			0x2a8 0x62c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA2__PATA_DATA_2			0x2ac 0x630 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA2__GPIO2_2				0x2ac 0x630 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2			0x2ac 0x630 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6			0x2ac 0x630 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2		0x2ac 0x630 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2			0x2ac 0x630 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA3__PATA_DATA_3			0x2b0 0x634 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA3__GPIO2_3				0x2b0 0x634 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3			0x2b0 0x634 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7			0x2b0 0x634 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3		0x2b0 0x634 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3			0x2b0 0x634 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA4__PATA_DATA_4			0x2b4 0x638 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA4__GPIO2_4				0x2b4 0x638 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4			0x2b4 0x638 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4			0x2b4 0x638 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4		0x2b4 0x638 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4			0x2b4 0x638 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA5__PATA_DATA_5			0x2b8 0x63c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA5__GPIO2_5				0x2b8 0x63c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5			0x2b8 0x63c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5			0x2b8 0x63c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5		0x2b8 0x63c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5			0x2b8 0x63c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA6__PATA_DATA_6			0x2bc 0x640 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA6__GPIO2_6				0x2bc 0x640 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6			0x2bc 0x640 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6			0x2bc 0x640 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6		0x2bc 0x640 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6			0x2bc 0x640 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA7__PATA_DATA_7			0x2c0 0x644 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA7__GPIO2_7				0x2c0 0x644 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7			0x2c0 0x644 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7			0x2c0 0x644 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7		0x2c0 0x644 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7			0x2c0 0x644 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA8__PATA_DATA_8			0x2c4 0x648 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA8__GPIO2_8				0x2c4 0x648 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4			0x2c4 0x648 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8			0x2c4 0x648 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0			0x2c4 0x648 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8		0x2c4 0x648 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8			0x2c4 0x648 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA9__PATA_DATA_9			0x2c8 0x64c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA9__GPIO2_9				0x2c8 0x64c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5			0x2c8 0x64c 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9			0x2c8 0x64c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1			0x2c8 0x64c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9		0x2c8 0x64c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9			0x2c8 0x64c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA10__PATA_DATA_10			0x2cc 0x650 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA10__GPIO2_10				0x2cc 0x650 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6			0x2cc 0x650 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10			0x2cc 0x650 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2			0x2cc 0x650 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10		0x2cc 0x650 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10			0x2cc 0x650 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA11__PATA_DATA_11			0x2d0 0x654 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA11__GPIO2_11				0x2d0 0x654 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7			0x2d0 0x654 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11			0x2d0 0x654 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3			0x2d0 0x654 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11		0x2d0 0x654 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11			0x2d0 0x654 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA12__PATA_DATA_12			0x2d4 0x658 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA12__GPIO2_12				0x2d4 0x658 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4			0x2d4 0x658 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12			0x2d4 0x658 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0			0x2d4 0x658 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12		0x2d4 0x658 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12			0x2d4 0x658 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA13__PATA_DATA_13			0x2d8 0x65c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA13__GPIO2_13				0x2d8 0x65c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5			0x2d8 0x65c 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13			0x2d8 0x65c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1			0x2d8 0x65c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13		0x2d8 0x65c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13			0x2d8 0x65c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA14__PATA_DATA_14			0x2dc 0x660 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA14__GPIO2_14				0x2dc 0x660 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6			0x2dc 0x660 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14			0x2dc 0x660 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2			0x2dc 0x660 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14		0x2dc 0x660 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14			0x2dc 0x660 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA15__PATA_DATA_15			0x2e0 0x664 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA15__GPIO2_15				0x2e0 0x664 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7			0x2e0 0x664 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15			0x2e0 0x664 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3			0x2e0 0x664 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15		0x2e0 0x664 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15			0x2e0 0x664 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0				0x2e4 0x66c 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA0__GPIO1_16				0x2e4 0x66c 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA0__GPT_CAPIN1				0x2e4 0x66c 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA0__CSPI_MISO				0x2e4 0x66c 0x784 0x5 0x2
+#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP			0x2e4 0x66c 0x778 0x7 0x0
+#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1				0x2e8 0x670 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA1__GPIO1_17				0x2e8 0x670 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA1__GPT_CAPIN2				0x2e8 0x670 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA1__CSPI_SS0				0x2e8 0x670 0x78c 0x5 0x3
+#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP			0x2e8 0x670 0x77c 0x7 0x1
+#define MX53_PAD_SD1_CMD__ESDHC1_CMD				0x2ec 0x674 0x000 0x0 0x0
+#define MX53_PAD_SD1_CMD__GPIO1_18				0x2ec 0x674 0x000 0x1 0x0
+#define MX53_PAD_SD1_CMD__GPT_CMPOUT1				0x2ec 0x674 0x000 0x3 0x0
+#define MX53_PAD_SD1_CMD__CSPI_MOSI				0x2ec 0x674 0x788 0x5 0x2
+#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP				0x2ec 0x674 0x770 0x7 0x0
+#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2				0x2f0 0x678 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA2__GPIO1_19				0x2f0 0x678 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2				0x2f0 0x678 0x000 0x2 0x0
+#define MX53_PAD_SD1_DATA2__PWM2_PWMO				0x2f0 0x678 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B			0x2f0 0x678 0x000 0x4 0x0
+#define MX53_PAD_SD1_DATA2__CSPI_SS1				0x2f0 0x678 0x790 0x5 0x2
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB		0x2f0 0x678 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP			0x2f0 0x678 0x774 0x7 0x0
+#define MX53_PAD_SD1_CLK__ESDHC1_CLK				0x2f4 0x67c 0x000 0x0 0x0
+#define MX53_PAD_SD1_CLK__GPIO1_20				0x2f4 0x67c 0x000 0x1 0x0
+#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT			0x2f4 0x67c 0x000 0x2 0x0
+#define MX53_PAD_SD1_CLK__GPT_CLKIN				0x2f4 0x67c 0x000 0x3 0x0
+#define MX53_PAD_SD1_CLK__CSPI_SCLK				0x2f4 0x67c 0x780 0x5 0x2
+#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0			0x2f4 0x67c 0x000 0x7 0x0
+#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3				0x2f8 0x680 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA3__GPIO1_21				0x2f8 0x680 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3				0x2f8 0x680 0x000 0x2 0x0
+#define MX53_PAD_SD1_DATA3__PWM1_PWMO				0x2f8 0x680 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B			0x2f8 0x680 0x000 0x4 0x0
+#define MX53_PAD_SD1_DATA3__CSPI_SS2				0x2f8 0x680 0x794 0x5 0x2
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB		0x2f8 0x680 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1			0x2f8 0x680 0x000 0x7 0x0
+#define MX53_PAD_SD2_CLK__ESDHC2_CLK				0x2fc 0x688 0x000 0x0 0x0
+#define MX53_PAD_SD2_CLK__GPIO1_10				0x2fc 0x688 0x000 0x1 0x0
+#define MX53_PAD_SD2_CLK__KPP_COL_5				0x2fc 0x688 0x840 0x2 0x2
+#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS			0x2fc 0x688 0x73c 0x3 0x1
+#define MX53_PAD_SD2_CLK__CSPI_SCLK				0x2fc 0x688 0x780 0x5 0x3
+#define MX53_PAD_SD2_CLK__SCC_RANDOM_V				0x2fc 0x688 0x000 0x7 0x0
+#define MX53_PAD_SD2_CMD__ESDHC2_CMD				0x300 0x68c 0x000 0x0 0x0
+#define MX53_PAD_SD2_CMD__GPIO1_11				0x300 0x68c 0x000 0x1 0x0
+#define MX53_PAD_SD2_CMD__KPP_ROW_5				0x300 0x68c 0x84c 0x2 0x1
+#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC			0x300 0x68c 0x738 0x3 0x1
+#define MX53_PAD_SD2_CMD__CSPI_MOSI				0x300 0x68c 0x788 0x5 0x3
+#define MX53_PAD_SD2_CMD__SCC_RANDOM				0x300 0x68c 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3				0x304 0x690 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA3__GPIO1_12				0x304 0x690 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA3__KPP_COL_6				0x304 0x690 0x844 0x2 0x1
+#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC			0x304 0x690 0x740 0x3 0x1
+#define MX53_PAD_SD2_DATA3__CSPI_SS2				0x304 0x690 0x794 0x5 0x3
+#define MX53_PAD_SD2_DATA3__SJC_DONE				0x304 0x690 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2				0x308 0x694 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA2__GPIO1_13				0x308 0x694 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA2__KPP_ROW_6				0x308 0x694 0x850 0x2 0x1
+#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD			0x308 0x694 0x734 0x3 0x1
+#define MX53_PAD_SD2_DATA2__CSPI_SS1				0x308 0x694 0x790 0x5 0x3
+#define MX53_PAD_SD2_DATA2__SJC_FAIL				0x308 0x694 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1				0x30c 0x698 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA1__GPIO1_14				0x30c 0x698 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA1__KPP_COL_7				0x30c 0x698 0x848 0x2 0x1
+#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS			0x30c 0x698 0x744 0x3 0x1
+#define MX53_PAD_SD2_DATA1__CSPI_SS0				0x30c 0x698 0x78c 0x5 0x4
+#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO			0x30c 0x698 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0				0x310 0x69c 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA0__GPIO1_15				0x310 0x69c 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA0__KPP_ROW_7				0x310 0x69c 0x854 0x2 0x1
+#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD			0x310 0x69c 0x730 0x3 0x1
+#define MX53_PAD_SD2_DATA0__CSPI_MISO				0x310 0x69c 0x784 0x5 0x3
+#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT			0x310 0x69c 0x000 0x7 0x0
+#define MX53_PAD_GPIO_0__CCM_CLKO				0x314 0x6a4 0x000 0x0 0x0
+#define MX53_PAD_GPIO_0__GPIO1_0				0x314 0x6a4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_0__KPP_COL_5				0x314 0x6a4 0x840 0x2 0x3
+#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK			0x314 0x6a4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_0__EPIT1_EPITO				0x314 0x6a4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB				0x314 0x6a4 0x000 0x5 0x0
+#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR			0x314 0x6a4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_0__CSU_TD					0x314 0x6a4 0x000 0x7 0x0
+#define MX53_PAD_GPIO_1__ESAI1_SCKR				0x318 0x6a8 0x7dc 0x0 0x1
+#define MX53_PAD_GPIO_1__GPIO1_1				0x318 0x6a8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_1__KPP_ROW_5				0x318 0x6a8 0x84c 0x2 0x2
+#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK			0x318 0x6a8 0x000 0x3 0x0
+#define MX53_PAD_GPIO_1__PWM2_PWMO				0x318 0x6a8 0x000 0x4 0x0
+#define MX53_PAD_GPIO_1__WDOG2_WDOG_B				0x318 0x6a8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_1__ESDHC1_CD				0x318 0x6a8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_1__SRC_TESTER_ACK				0x318 0x6a8 0x000 0x7 0x0
+#define MX53_PAD_GPIO_9__ESAI1_FSR				0x31c 0x6ac 0x7cc 0x0 0x1
+#define MX53_PAD_GPIO_9__GPIO1_9				0x31c 0x6ac 0x000 0x1 0x0
+#define MX53_PAD_GPIO_9__KPP_COL_6				0x31c 0x6ac 0x844 0x2 0x2
+#define MX53_PAD_GPIO_9__CCM_REF_EN_B				0x31c 0x6ac 0x000 0x3 0x0
+#define MX53_PAD_GPIO_9__PWM1_PWMO				0x31c 0x6ac 0x000 0x4 0x0
+#define MX53_PAD_GPIO_9__WDOG1_WDOG_B				0x31c 0x6ac 0x000 0x5 0x0
+#define MX53_PAD_GPIO_9__ESDHC1_WP				0x31c 0x6ac 0x7fc 0x6 0x1
+#define MX53_PAD_GPIO_9__SCC_FAIL_STATE				0x31c 0x6ac 0x000 0x7 0x0
+#define MX53_PAD_GPIO_3__ESAI1_HCKR				0x320 0x6b0 0x7d4 0x0 0x1
+#define MX53_PAD_GPIO_3__GPIO1_3				0x320 0x6b0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_3__I2C3_SCL				0x320 0x6b0 0x824 0x2 0x1
+#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN				0x320 0x6b0 0x000 0x3 0x0
+#define MX53_PAD_GPIO_3__CCM_CLKO2				0x320 0x6b0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0		0x320 0x6b0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC			0x320 0x6b0 0x8a0 0x6 0x1
+#define MX53_PAD_GPIO_3__MLB_MLBCLK				0x320 0x6b0 0x858 0x7 0x2
+#define MX53_PAD_GPIO_6__ESAI1_SCKT				0x324 0x6b4 0x7e0 0x0 0x1
+#define MX53_PAD_GPIO_6__GPIO1_6				0x324 0x6b4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_6__I2C3_SDA				0x324 0x6b4 0x828 0x2 0x1
+#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0				0x324 0x6b4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB			0x324 0x6b4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1		0x324 0x6b4 0x000 0x5 0x0
+#define MX53_PAD_GPIO_6__ESDHC2_LCTL				0x324 0x6b4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_6__MLB_MLBSIG				0x324 0x6b4 0x860 0x7 0x2
+#define MX53_PAD_GPIO_2__ESAI1_FST				0x328 0x6b8 0x7d0 0x0 0x1
+#define MX53_PAD_GPIO_2__GPIO1_2				0x328 0x6b8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_2__KPP_ROW_6				0x328 0x6b8 0x850 0x2 0x2
+#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1				0x328 0x6b8 0x000 0x3 0x0
+#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0			0x328 0x6b8 0x000 0x4 0x0
+#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2		0x328 0x6b8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_2__ESDHC2_WP				0x328 0x6b8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_2__MLB_MLBDAT				0x328 0x6b8 0x85c 0x7 0x2
+#define MX53_PAD_GPIO_4__ESAI1_HCKT				0x32c 0x6bc 0x7d8 0x0 0x1
+#define MX53_PAD_GPIO_4__GPIO1_4				0x32c 0x6bc 0x000 0x1 0x0
+#define MX53_PAD_GPIO_4__KPP_COL_7				0x32c 0x6bc 0x848 0x2 0x2
+#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2				0x32c 0x6bc 0x000 0x3 0x0
+#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1			0x32c 0x6bc 0x000 0x4 0x0
+#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3		0x32c 0x6bc 0x000 0x5 0x0
+#define MX53_PAD_GPIO_4__ESDHC2_CD				0x32c 0x6bc 0x000 0x6 0x0
+#define MX53_PAD_GPIO_4__SCC_SEC_STATE				0x32c 0x6bc 0x000 0x7 0x0
+#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3				0x330 0x6c0 0x7ec 0x0 0x1
+#define MX53_PAD_GPIO_5__GPIO1_5				0x330 0x6c0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_5__KPP_ROW_7				0x330 0x6c0 0x854 0x2 0x2
+#define MX53_PAD_GPIO_5__CCM_CLKO				0x330 0x6c0 0x000 0x3 0x0
+#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2			0x330 0x6c0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4		0x330 0x6c0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_5__I2C3_SCL				0x330 0x6c0 0x824 0x6 0x2
+#define MX53_PAD_GPIO_5__CCM_PLL1_BYP				0x330 0x6c0 0x770 0x7 0x1
+#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1				0x334 0x6c4 0x7f4 0x0 0x1
+#define MX53_PAD_GPIO_7__GPIO1_7				0x334 0x6c4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_7__EPIT1_EPITO				0x334 0x6c4 0x000 0x2 0x0
+#define MX53_PAD_GPIO_7__CAN1_TXCAN				0x334 0x6c4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_7__UART2_TXD_MUX				0x334 0x6c4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_7__FIRI_RXD				0x334 0x6c4 0x80c 0x5 0x1
+#define MX53_PAD_GPIO_7__SPDIF_PLOCK				0x334 0x6c4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_7__CCM_PLL2_BYP				0x334 0x6c4 0x774 0x7 0x1
+#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0				0x338 0x6c8 0x7f8 0x0 0x1
+#define MX53_PAD_GPIO_8__GPIO1_8				0x338 0x6c8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_8__EPIT2_EPITO				0x338 0x6c8 0x000 0x2 0x0
+#define MX53_PAD_GPIO_8__CAN1_RXCAN				0x338 0x6c8 0x760 0x3 0x2
+#define MX53_PAD_GPIO_8__UART2_RXD_MUX				0x338 0x6c8 0x880 0x4 0x5
+#define MX53_PAD_GPIO_8__FIRI_TXD				0x338 0x6c8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_8__SPDIF_SRCLK				0x338 0x6c8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_8__CCM_PLL3_BYP				0x338 0x6c8 0x778 0x7 0x1
+#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2				0x33c 0x6cc 0x7f0 0x0 0x1
+#define MX53_PAD_GPIO_16__GPIO7_11				0x33c 0x6cc 0x000 0x1 0x0
+#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT			0x33c 0x6cc 0x000 0x2 0x0
+#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1			0x33c 0x6cc 0x000 0x4 0x0
+#define MX53_PAD_GPIO_16__SPDIF_IN1				0x33c 0x6cc 0x870 0x5 0x1
+#define MX53_PAD_GPIO_16__I2C3_SDA				0x33c 0x6cc 0x828 0x6 0x2
+#define MX53_PAD_GPIO_16__SJC_DE_B				0x33c 0x6cc 0x000 0x7 0x0
+#define MX53_PAD_GPIO_17__ESAI1_TX0				0x340 0x6d0 0x7e4 0x0 0x1
+#define MX53_PAD_GPIO_17__GPIO7_12				0x340 0x6d0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0			0x340 0x6d0 0x868 0x2 0x1
+#define MX53_PAD_GPIO_17__GPC_PMIC_RDY				0x340 0x6d0 0x810 0x3 0x1
+#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG			0x340 0x6d0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_17__SPDIF_OUT1				0x340 0x6d0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_17__IPU_SNOOP2				0x340 0x6d0 0x000 0x6 0x0
+#define MX53_PAD_GPIO_17__SJC_JTAG_ACT				0x340 0x6d0 0x000 0x7 0x0
+#define MX53_PAD_GPIO_18__ESAI1_TX1				0x344 0x6d4 0x7e8 0x0 0x1
+#define MX53_PAD_GPIO_18__GPIO7_13				0x344 0x6d4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1			0x344 0x6d4 0x86c 0x2 0x1
+#define MX53_PAD_GPIO_18__OWIRE_LINE				0x344 0x6d4 0x864 0x3 0x1
+#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG		0x344 0x6d4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK			0x344 0x6d4 0x768 0x5 0x1
+#define MX53_PAD_GPIO_18__ESDHC1_LCTL				0x344 0x6d4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST			0x344 0x6d4 0x000 0x7 0x0
+
+#endif /* __DTS_IMX53_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx53-ppd-uboot.dtsi b/roms/u-boot/arch/arm/dts/imx53-ppd-uboot.dtsi
new file mode 100644
index 000000000..b293e27a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-ppd-uboot.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Collabora Ltd
+ * Copyright 2019 General Electric Company
+ */
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+
+	bootcount {
+		compatible = "u-boot,bootcount-i2c-eeprom";
+		i2c-eeprom = <&bootcount>;
+	};
+
+	panel-lvds0 {
+		compatible = "simple-panel";
+		backlight = <&pwm_bl>;
+	};
+};
+
+&eeprom {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		vpd@0 {
+			reg = <0 800>;
+		};
+
+		bootcount: bootcount@1022 {
+			reg = <1022 2>;
+		};
+	};
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio4 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio5 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-ppd.dts b/roms/u-boot/arch/arm/dts/imx53-ppd.dts
new file mode 100644
index 000000000..a6278476d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-ppd.dts
@@ -0,0 +1,1087 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "General Electric CS ONE";
+	compatible = "ge,imx53-cpuvo", "fsl,imx53";
+
+	aliases {
+		spi0 = &cspi;
+		spi1 = &ecspi1;
+		spi2 = &ecspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	cko2_11M: sgtl-clock-cko2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	sgtlsound: sound {
+		compatible = "fsl,imx53-cpuvo-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-cpuvo-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+	};
+
+	reg_sgtl5k: regulator-sgtl5k {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-sgtl5k";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usb_otg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh2_vbus: regulator-usbh2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbh3_vbus: regulator-usbh3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh3_vbus>;
+		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_tsiref: regulator-tsiref {
+		compatible = "regulator-fixed";
+		regulator-name = "tsiref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		/* TPS54320 */
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_lcd: regulator-3v3-lcd {
+		/* MIC2009 */
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V3";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	pwm_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
+				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
+				     73 76 79 81 84 86 89 91 94 96 99 102 104
+				     107 109 112 114 117 119 122 124 127 130
+				     132 135 137 140 142 145 147 150 153 155
+				     158 160 163 165 168 170 173 175 178 181
+				     183 186 188 191 193 196 198 201 204 206
+				     209 211 214 216 219 221 224 226 229 232
+				     234 237 239 242 244 247 249 252 255>;
+		default-brightness-level = <0>;
+		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3_lcd>;
+	};
+
+	leds {
+		compatible = "pwm-leds";
+
+		alarm-brightness {
+			pwms = <&pwm1 0 100000>;
+			max-brightness = <255>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		active-delay = <100>;
+		inactive-delay = <10>;
+		wait-delay = <100>;
+	};
+
+	power-gpio-keys {
+		compatible = "gpio-keys";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	touch-lock-key {
+		compatible = "gpio-keys";
+
+		touch-lock-button {
+			label = "Touch lock button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F12>;
+		};
+	};
+
+	usbphy2: usbphy-2 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
+		clock-names = "main_clk";
+		clock-frequency = <24000000>;
+		clocks = <&clks IMX5_CLK_CKO2>;
+		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+	};
+
+	usbphy3: usbphy-3 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		clock-names = "main_clk";
+
+		clock-frequency = <24000000>;
+		clocks = <&clks IMX5_CLK_CKO2>;
+		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+	};
+
+	panel-lvds0 {
+		compatible = "nvd,9128";
+		power-supply = <&reg_3v3_lcd>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&usbphy0 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&usbphy1 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW
+		    &gpio4 10 GPIO_ACTIVE_LOW
+		    &gpio4 11 GPIO_ACTIVE_LOW
+		    &gpio4 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "ge,achc";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "ge,achc";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+	};
+
+	gpioxra0: gpio@2 {
+		compatible = "exar,xra1403";
+		reg = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		spi-max-frequency = <1000000>;
+	};
+
+	gpioxra1: gpio@3 {
+		compatible = "exar,xra1403";
+		reg = <3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	da9053@0 {
+		compatible = "dlg,da9053-aa";
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <1000000>;
+		dlg,tsi-as-adc;
+		tsiref-supply = <&reg_tsiref>;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+
+		i2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				#sound-dai-cells = <0>;
+				VDDA-supply = <&reg_sgtl5k>;
+				VDDIO-supply = <&reg_sgtl5k>;
+				clocks = <&cko2_11M>;
+				status = "okay";
+			};
+		};
+
+		i2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			rtc@30 {
+			       compatible = "sii,s35392a-rtc";
+			       reg = <0x30>;
+			};
+
+			temp@48 {
+				compatible = "ti,tmp112";
+				reg = <0x48>;
+			};
+
+			mma8453q: accelerometer@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-names = "INT1";
+			};
+
+			mpl3115: pressure-sensor@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c9: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c10: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c11: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+		reg = <0x4b>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@2 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-0 = <&pinctrl_usb_otg>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "ulpi";
+	dr_mode = "host";
+	fsl,usbphy = <&usbphy2>;
+	vbus-supply = <&reg_usbh2_vbus>;
+	status = "okay";
+};
+
+&usbh3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh3>;
+	phy_type = "ulpi";
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh3_vbus>;
+	fsl,usbphy = <&usbphy3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_rev6>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD	0x400
+			MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD	0x400
+			MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC	0x400
+			MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS	0x400
+			MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC	0x400
+			MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS	0x400
+			MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	0x400
+			MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD	0x400
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT21__ECSPI1_MOSI	0x400
+			MX53_PAD_DISP0_DAT22__ECSPI1_MISO	0x400
+			MX53_PAD_DISP0_DAT20__ECSPI1_SCLK	0x400
+			/* ECSPI1_SS0, must treat as GPIO for EzPort */
+			MX53_PAD_DISP0_DAT23__GPIO5_17		0x400
+			MX53_PAD_KEY_COL2__GPIO4_10		0x0
+			MX53_PAD_KEY_ROW2__GPIO4_11		0x0
+			MX53_PAD_KEY_COL3__GPIO4_12		0x0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_CS1__ECSPI2_MOSI		0x0
+			MX53_PAD_EIM_OE__ECSPI2_MISO		0x0
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x0
+			MX53_PAD_EIM_RW__GPIO2_26		0x0
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x0
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x0
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x0
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x0
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x0
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x0
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x0
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x0
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x0
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x0
+		>;
+	};
+
+	pinctrl_hog_rev6: hoggrp {
+		fsl,pins = <
+			/* CKO2 */
+			MX53_PAD_GPIO_3__CCM_CLKO2		0x4
+			/* DEFIB_SYNC_MARKER_IN_IRQ */
+			MX53_PAD_GPIO_5__GPIO1_5		0x0
+			/* ACCELEROMETER_DATA_RDY_N */
+			MX53_PAD_GPIO_6__GPIO1_6		0x0
+			/* TEMPERATURE_ALERT_N */
+			MX53_PAD_GPIO_7__GPIO1_7		0x0
+			/* BAROMETRIC_PRESSURE_DATA_RDY_N */
+			MX53_PAD_GPIO_8__GPIO1_8		0x0
+			/* DOCKING_I2C_INTERFACE_IRQ_N */
+			MX53_PAD_PATA_DATA4__GPIO2_4		0x0
+			/* PWR_OUT_TO_DOCK_FAULT_N */
+			MX53_PAD_PATA_DATA5__GPIO2_5		0x0
+			/* ENABLE_PWR_TO_DOCK_N */
+			MX53_PAD_PATA_DATA6__GPIO2_6		0x0
+			/* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */
+			MX53_PAD_PATA_DATA7__GPIO2_7		0x0
+			/* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */
+			MX53_PAD_PATA_DATA12__GPIO2_12		0x0
+			/* DOCK_PRESENT_N */
+			MX53_PAD_PATA_DATA13__GPIO2_13		0x0
+			/* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */
+			MX53_PAD_PATA_DATA14__GPIO2_14		0x0
+			/* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */
+			MX53_PAD_PATA_DATA15__GPIO2_15		0x0
+			/* RESET_IMX535_ETHERNET_PHY_N */
+			MX53_PAD_EIM_A22__GPIO2_16		0x0
+			/* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
+			MX53_PAD_EIM_A21__GPIO2_17		0x0
+			/* RESET_I2C1_BUS_SEGMENT_MUX_N */
+			MX53_PAD_EIM_A20__GPIO2_18		0x0
+			/* RESET_IMX535_USB_HOST3_PHY_N */
+			MX53_PAD_EIM_A19__GPIO2_19		0x0
+			/* ESDHC3_EMMC_NAND_RST_N */
+			MX53_PAD_EIM_A18__GPIO2_20		0x0
+			/* LCD_AND_UI_INTERFACE_PWR_FAULT_N */
+			MX53_PAD_EIM_A17__GPIO2_21		0x0
+			/* POWER_DOWN_LVDS0_DESERIALIZER_N */
+			MX53_PAD_EIM_A16__GPIO2_22		0x0
+			/* POWER_DOWN_LVDS1_DESERIALIZER_N */
+			MX53_PAD_EIM_LBA__GPIO2_27		0x0
+			/* RESET_DP0_TRANSMITTER_N */
+			MX53_PAD_EIM_EB0__GPIO2_28		0x0
+			/* RESET_DP1_TRANSMITTER_N */
+			MX53_PAD_EIM_EB1__GPIO2_29		0x0
+			/* ENABLE_SPDIF_AUDIO_TO_DP0 */
+			MX53_PAD_EIM_DA0__GPIO3_0		0x0
+			/* ENABLE_SPDIF_AUDIO_TO_DP1 */
+			MX53_PAD_EIM_DA1__GPIO3_1		0x0
+			/* LVDS1_MUX_CTRL */
+			MX53_PAD_EIM_DA2__GPIO3_2		0x0
+			/* LVDS0_MUX_CTRL */
+			MX53_PAD_EIM_DA3__GPIO3_3		0x0
+			/* DP1_TRANSMITTER_IRQ */
+			MX53_PAD_EIM_DA4__GPIO3_4		0x0
+			/* DP0_TRANSMITTER_IRQ */
+			MX53_PAD_EIM_DA5__GPIO3_5		0x0
+			/* USB_RESET_N */
+			MX53_PAD_EIM_DA6__GPIO3_6		0x0
+			/* ENABLE_BATTERY_CHARGER */
+			MX53_PAD_EIM_DA7__GPIO3_7		0x0
+			/* SOFTWARE_CONTROLLED_PWR_CYCLE */
+			MX53_PAD_EIM_DA8__GPIO3_8		0x0
+			/* SOFTWARE_CONTROLLED_POWERDOWN */
+			MX53_PAD_EIM_DA9__GPIO3_9		0x0
+			/* DC_PWR_IN_OK */
+			MX53_PAD_EIM_DA10__GPIO3_10		0x0
+			/* BATT_PRESENT_N */
+			MX53_PAD_EIM_DA11__GPIO3_11		0xe4
+			/* PMIC_IRQ_N */
+			MX53_PAD_EIM_DA12__GPIO3_12		0x0
+			/* PMIC_VDD_FAULT_STATUS_N */
+			MX53_PAD_EIM_DA13__GPIO3_13		0x0
+			/* IMX535_ETHERNET_PHY_STATUS_IRQ_N */
+			MX53_PAD_EIM_DA14__GPIO3_14		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_DA15__GPIO3_15		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_D22__GPIO3_22		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_D24__GPIO3_24		0x0
+			/* NBP_PUMP_VALVE_PWR_ENABLE */
+			MX53_PAD_EIM_D25__GPIO3_25		0x0
+			/* NIBP_RESET_N */
+			MX53_PAD_EIM_D26__GPIO3_26		0x0
+			/* LATCHED_OVERPRESSURE_N */
+			MX53_PAD_EIM_D27__GPIO3_27		0x0
+			/* NBP_SBWTCLK */
+			MX53_PAD_EIM_D29__GPIO3_29		0x0
+			/* ENABLE_WIFI_MODULE */
+			MX53_PAD_GPIO_11__GPIO4_1		0x400
+			/* WIFI_MODULE_IRQ_N */
+			MX53_PAD_GPIO_12__GPIO4_2		0x400
+			/* ENABLE_BLUETOOTH_MODULE */
+			MX53_PAD_GPIO_13__GPIO4_3		0x400
+			/* RESET_IMX535_USB_HOST2_PHY_N */
+			MX53_PAD_GPIO_14__GPIO4_4		0x400
+			/* ONKEY_IS_DEPRESSED */
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x0
+			/* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */
+			MX53_PAD_EIM_WAIT__GPIO5_0		0x0
+			/* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */
+			MX53_PAD_EIM_A25__GPIO5_2		0x0
+			/* I2C_PCAP_TOUCHSCREEN_IRQ_N */
+			MX53_PAD_EIM_A24__GPIO5_4		0x0
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT13__GPIO5_7		0x400
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT14__GPIO5_8		0x400
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT15__GPIO5_9		0x400
+			/* HOST_CONTROLLED_RESET_TO_LCD_N */
+			MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x0
+			/* HOST_CONTROLLED_RESET_TO_PCAP_N */
+			MX53_PAD_CSI0_MCLK__GPIO5_19		0x0
+			/* LR_SCAN_CTRL */
+			MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x0
+			/* UD_SCAN_CTRL */
+			MX53_PAD_CSI0_VSYNC__GPIO5_21		0x0
+			/* DATA_WIDTH_CTRL */
+			MX53_PAD_CSI0_DAT10__GPIO5_28		0x0
+			/* BACKLIGHT_ENABLE */
+			MX53_PAD_CSI0_DAT11__GPIO5_29		0x0
+			/* MED_USB_PORT_1_HOST_SELECT */
+			MX53_PAD_EIM_A23__GPIO6_6		0x0
+			/* MED_USB_PORT_2_HOST_SELECT */
+			MX53_PAD_NANDF_CLE__GPIO6_7		0x0
+			/* MED_USB_PORT_3_HOST_SELECT */
+			MX53_PAD_NANDF_ALE__GPIO6_8		0x0
+			/* MED_USB_PORT_4_HOST_SELECT */
+			MX53_PAD_NANDF_WP_B__GPIO6_9		0x0
+			/* MED_USB_PORT_5_HOST_SELECT */
+			MX53_PAD_NANDF_RB0__GPIO6_10		0x0
+			/* MED_USB_PORT_6_HOST_SELECT */
+			MX53_PAD_NANDF_CS0__GPIO6_11		0x0
+			/* MED_USB_PORT_7_HOST_SELECT */
+			MX53_PAD_NANDF_WE_B__GPIO6_12		0x0
+			/* MED_USB_PORT_8_HOST_SELECT */
+			MX53_PAD_NANDF_RE_B__GPIO6_13		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_0 */
+			MX53_PAD_NANDF_CS1__GPIO6_14		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_1 */
+			MX53_PAD_NANDF_CS2__GPIO6_15		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_2 */
+			MX53_PAD_NANDF_CS3__GPIO6_16		0x0
+			/* POWER_AND_BOOT_STATUS_INDICATOR */
+			MX53_PAD_PATA_INTRQ__GPIO7_2		0x1e4
+			/* ACTIVATE_ALARM_LIGHT_RED */
+			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
+			/* ACTIVATE_ALARM_LIGHT_YELLOW */
+			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
+			/* ACTIVATE_ALARM_LIGHT_CYAN */
+			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
+			/* RUNNING_ON_BATTERY_INDICATOR_GREEN */
+			MX53_PAD_GPIO_16__GPIO7_11		0x0
+			/* BATTERY_STATUS_INDICATOR_AMBER */
+			MX53_PAD_GPIO_17__GPIO7_12		0x0
+			/* AUDIO_ALARMS_SILENCED_INDICATOR */
+			MX53_PAD_GPIO_18__GPIO7_13		0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D28__GPIO3_28		0x1e4
+			MX53_PAD_EIM_D21__GPIO3_21		0x1e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+			MX53_PAD_EIM_D16__I2C2_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__GPIO3_16		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D17__I2C3_SCL		0x400001e4
+			MX53_PAD_EIM_D18__I2C3_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D18__GPIO3_18		0x1e4
+			MX53_PAD_EIM_D17__GPIO3_17		0x1e4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT9__PWM2_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_EIM_D23__UART3_CTS		0x1e4
+			MX53_PAD_EIM_EB3__UART3_RTS		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL1__UART5_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW1__UART5_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_usb_otg_vbus: usb-otg-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_OTG_VBUS_ENABLE */
+			MX53_PAD_KEY_ROW4__GPIO4_15		0x1c4
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			/* USB H2 */
+			MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180
+			MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180
+			MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180
+			MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180
+			MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180
+			MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180
+			MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180
+			MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180
+			MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP	 0x180
+			MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT	 0x180
+			MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK	 0x180
+			MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR	 0x5
+			MX53_PAD_EIM_D30__USBOH3_USBH2_OC	 0x180
+		>;
+	};
+
+	pinctrl_usbh2_vbus: usbh2-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_HOST2_VBUS_ENABLE */
+			MX53_PAD_EIM_D31__GPIO3_31		0x0
+		>;
+	};
+
+	pinctrl_usbh3_vbus: usbh3-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_HOST3_VBUS_ENABLE */
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0x0
+		>;
+	};
+
+	pinctrl_usbh3: usbh3grp {
+		fsl,pins = <
+			/* USB H3 */
+			MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180
+			MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180
+			MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180
+			MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180
+			MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180
+			MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180
+			MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180
+			MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180
+			MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR	 0x5
+			MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK	 0x180
+			MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT	 0x180
+			MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP	 0x180
+			MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC	 0x180
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			/* USB_OTG_FAULT_N */
+			MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	0x180
+		>;
+	};
+};
+
+#include "imx53-ppd-uboot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx53-qsb-common.dtsi b/roms/u-boot/arch/arm/dts/imx53-qsb-common.dtsi
new file mode 100644
index 000000000..fe4244044
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-qsb-common.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
+				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+			>;
+		};
+
+		led_pin_gpio7_7: led_gpio7_7 {
+			fsl,pins = <
+				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_codec: codecgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+				MX53_PAD_EIM_DA13__GPIO3_13		0xe4
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+			>;
+		};
+
+		/* open drain */
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp0: ipudisp0grp {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_vga_sync: vgasync-grp {
+			fsl,pins = <
+				/* VGA_HSYNC, VSYNC with max drive strength */
+				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-qsb.dts b/roms/u-boot/arch/arm/dts/imx53-qsb.dts
new file mode 100644
index 000000000..6831836bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-qsb.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx53-qsb-common.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Quick Start Board";
+	compatible = "fsl,imx53-qsb", "fsl,imx53";
+};
+
+&i2c1 {
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&tve {
+	dac-supply = <&ldo7_reg>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53-usbarmory.dts b/roms/u-boot/arch/arm/dts/imx53-usbarmory.dts
new file mode 100644
index 000000000..f34993a49
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53-usbarmory.dts
@@ -0,0 +1,225 @@
+/*
+ * USB armory MkI device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "LED";
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/*
+ * Not every i.MX53 P/N supports clock > 800MHz.
+ * As USB armory does not mount a specific P/N set a safe clock upper limit.
+ */
+&cpu0 {
+	operating-points = <
+		/* kHz */
+		166666  850000
+		400000  900000
+		800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x80
+			MX53_PAD_EIM_D28__I2C1_SDA	0x80
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
+		>;
+	};
+
+	/*
+	 * UART mode pin header configuration
+	 * 3 - GPIO5[26], pull-down 100K
+	 * 4 - GPIO5[27], pull-down 100K
+	 * 5 - TX, pull-up 100K
+	 * 6 - RX, pull-up 100K
+	 * 7 - GPIO5[30], pull-down 100K
+	 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&pinctrl_i2c1_pmic>;
+	status = "okay";
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx53.dtsi b/roms/u-boot/arch/arm/dts/imx53.dtsi
new file mode 100644
index 000000000..ed341cfd9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx53.dtsi
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		ipu0 = &ipu;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&clks IMX5_CLK_ARM>;
+			clock-latency = <61036>;
+			voltage-tolerance = <5>;
+			operating-points = <
+				/* kHz */
+				 166666  850000
+				 400000  900000
+				 800000 1050000
+				1000000 1200000
+				1200000 1300000
+			>;
+		};
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
+	capture_subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
+	tzic: tz-interrupt-controller@fffc000 {
+		compatible = "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	usbphy1: usbphy-1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		sata: sata@10000000 {
+			compatible = "fsl,imx53-ahci";
+			reg = <0x10000000 0x1000>;
+			interrupts = <28>;
+			clocks = <&clks IMX5_CLK_SATA_GATE>,
+				 <&clks IMX5_CLK_SATA_REF>,
+				 <&clks IMX5_CLK_AHB>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
+		ipu: ipu@18000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx53-ipu";
+			reg = <0x18000000 0x08000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+
+				ipu_csi0_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+
+				ipu_csi1_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di0_lvds0: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds0_in>;
+				};
+			};
+
+			ipu_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di1_lvds1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds1_in>;
+				};
+
+				ipu_di1_tve: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&tve_in>;
+				};
+			};
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
+		aips@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: esdhc@50004000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: esdhc@50008000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi1: spi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx53-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: esdhc@50020000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: esdhc@50024000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			aipstz1: bridge@53f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x53f00000 0x60>;
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx53-usbmisc";
+				reg = <0x53f80800 0x200>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@53f94000 {
+				compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@53f98000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			wdog2: wdog@53f9c000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <59>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			srtc: rtc@53fa4000 {
+				compatible = "fsl,imx53-rtc";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks IMX5_CLK_SRTC_GATE>;
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			ldb: ldb@53fa8008 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ldb";
+				reg = <0x53fa8008 0x4>;
+				gpr = <&gpr>;
+				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
+				clock-names = "di0_pll", "di1_pll",
+					      "di0_sel", "di1_sel",
+					      "di0", "di1";
+				status = "disabled";
+
+				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					port@0 {
+						reg = <0>;
+
+						lvds0_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+
+				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					status = "disabled";
+
+					port@1 {
+						reg = <1>;
+
+						lvds1_in: endpoint {
+							remote-endpoint = <&ipu_di1_lvds1>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			can1: can@53fc8000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fc8000 0x4000>;
+				interrupts = <82>;
+				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@53fcc000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <83>;
+				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: src@53fd0000 {
+				compatible = "fsl,imx53-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx53-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@53fe4000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe4000 0x4000>;
+				interrupts = <107 108>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		aips@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			aipstz2: bridge@63f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x63f00000 0x60>;
+			};
+
+			iim: iim@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+				reg = <0x63f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			tigerp: tigerp@63fa0000 {
+				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+				reg = <0x63fa0000 0x28>;
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: sdma@63fb0000 {
+				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+			};
+
+			cspi: spi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			nfc: nand@63fdb000 {
+				compatible = "fsl,imx53-nand";
+				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+				interrupts = <8>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@63fe8000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fe8000 0x4000>;
+				interrupts = <96>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			tve: tve@63ff0000 {
+				compatible = "fsl,imx53-tve";
+				reg = <0x63ff0000 0x1000>;
+				interrupts = <92>;
+				clocks = <&clks IMX5_CLK_TVE_GATE>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>;
+				clock-names = "tve", "di_sel";
+				status = "disabled";
+
+				port {
+					tve_in: endpoint {
+						remote-endpoint = <&ipu_di1_tve>;
+					};
+				};
+			};
+
+			vpu: vpu@63ff4000 {
+				compatible = "fsl,imx53-vpu", "cnm,coda7541";
+				reg = <0x63ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&ocram>;
+			};
+
+			sahara: crypto@63ff8000 {
+				compatible = "fsl,imx53-sahara";
+				reg = <0x63ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
+
+		ocram: sram@f8000000 {
+			compatible = "mmio-sram";
+			reg = <0xf8000000 0x20000>;
+			clocks = <&clks IMX5_CLK_OCRAM>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6-apalis.dts b/roms/u-boot/arch/arm/dts/imx6-apalis.dts
new file mode 100644
index 000000000..72f7439ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6-apalis.dts
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D";
+	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc1;
+		mmc2 = &usdhc2;
+		usb0 = &usbotg; /* required for ums */
+		ethernet0 = &fec;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* USBO1_EN */
+		enable-active-high;
+	};
+
+	/* on-module USB hub */
+	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+		regulator-name = "usb_host_vbus_hub";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <2000>;
+		enable-active-high;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* USBH_EN */
+		enable-active-high;
+		vin-supply = <&reg_usb_host_vbus_hub>;
+	};
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@7 {
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+			reg = <7>;
+		};
+	};
+};
+
+/* Apalis Serial ATA */
+&sata {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dte>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dte>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+/* Apalis USBH[2|3|4] */
+&usbh1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+/* Apalis USBO1 */
+&usbotg {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; /* MMC1_CD */
+	disable-wp;
+	no-1-8-v;
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;	/* SD1_CD */
+	disable-wp;
+	no-1-8-v;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_apalis_gpio1: gpio2io04grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04	0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio2: gpio2io05grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio3: gpio2io06grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06	0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio4: gpio2io07grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07	0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio5: gpio6io10grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio6: gpio6io09grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio7: gpio1io02grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio8: gpio1io06grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x130b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK	0x100b1
+			/* SPI1 cs */
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25	0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			/* SPI2 cs */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Ethernet PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			/* Ethernet PHY interrupt */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio1io04grp {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17	0x4001b8b1
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18	0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
+			/* DE */
+			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
+			/* HSync */
+			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
+			/* VSync */
+			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
+			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
+			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
+			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
+			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
+			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
+			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
+			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
+			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
+			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
+			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
+			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
+			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
+			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
+			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
+			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
+			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
+			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
+			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
+			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
+			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
+			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
+			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
+			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
+			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
+		>;
+	};
+
+	pinctrl_ipu2_vdac: ipu2vdacgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK	0xd1
+			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15		0xd1
+			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02		0xd1
+			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03		0xd1
+			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00	0xf9
+			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01	0xf9
+			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02	0xf9
+			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03	0xf9
+			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04	0xf9
+			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05	0xf9
+			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06	0xf9
+			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07	0xf9
+			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08	0xf9
+			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09	0xf9
+			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10	0xf9
+			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11	0xf9
+			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12	0xf9
+			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13	0xf9
+			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14	0xf9
+			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15	0xf9
+		>;
+	};
+
+	pinctrl_mmc_cd: gpiommccdgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20	0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
+		fsl,pins = <
+			/* USBH_HUB_EN */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28	0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
+		fsl,pins = <
+			/* USBO1 power en */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x0f058
+		>;
+	};
+
+	pinctrl_reset_moci: gpioresetmocigrp {
+		fsl,pins = <
+			/* RESET_MOCI control */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x0f058
+		>;
+	};
+
+	pinctrl_sd_cd: gpiosdcdgrp {
+		fsl,pins = <
+			/* SD1 CD */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x000b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN	0x1b0b0
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT	0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B		0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B	0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dce: uart2dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart4_dte: uart4dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart5_dte: uart5dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_4bit: usdhc1grp_4bit {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_8bit: usdhc1grp_8bit {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4	0x17071
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5	0x17071
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6	0x17071
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7	0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6-colibri.dts b/roms/u-boot/arch/arm/dts/imx6-colibri.dts
new file mode 100644
index 000000000..387d6d5ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6-colibri.dts
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S";
+	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc1;
+		usb0 = &usbotg; /* required for ums */
+		ethernet0 = &fec;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* USBH_PEN */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			micrel,led-mode = <0>;
+			status = "okay";
+		};
+	};
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vgen1: unused */
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vgen3: unused */
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dte>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbh1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	disable-wp;
+	vqmmc-supply = <&reg_module_3v3>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK	0x100b1
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26	0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
+		>;
+	};
+
+	pinctrl_mmc_cd: gpiommccd {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* SODIMM 129 USBH_PEN */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B		0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B	0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_dte: uart3dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6-logicpd-baseboard.dtsi b/roms/u-boot/arch/arm/dts/imx6-logicpd-baseboard.dtsi
new file mode 100644
index 000000000..c40a7af6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6-logicpd-baseboard.dtsi
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/ {
+	keyboard {
+		compatible = "gpio-keys";
+
+		btn0 {
+			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
+			label = "btn0";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		btn1 {
+			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
+			label = "btn1";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		btn2 {
+			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
+			label = "btn2";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		btn3 {
+			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
+			label = "btn3";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		gen-led0 {
+			label = "led0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led0>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		gen-led1 {
+			label = "led1";
+			gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		gen-led2 {
+			label = "led2";
+			gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		gen-led3 {
+			label = "led3";
+			gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_3v3: regulator-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet: regulator-ethernet {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_enet>;
+		compatible = "regulator-fixed";
+		regulator-name = "ethernet-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&sw4_reg>;
+	};
+
+	reg_audio: regulator-audio {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_audio>;
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_uart3: regulator-uart3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_uart3>;
+		compatible = "regulator-fixed";
+		regulator-name = "uart3-supply";
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_1v8>;
+		compatible = "regulator-fixed";
+		regulator-name = "1v8-supply";
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie>;
+		regulator-name = "mpcie_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mipi: regulator-mipi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_mipi>;
+		regulator-name = "mipi_pwr_en";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_enet>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0013 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x8014 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+};
+
+&i2c3 {
+	ov5640: camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_mipi>;
+		AVDD-supply = <&reg_mipi>;
+		DVDD-supply = <&reg_mipi>;
+		reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pcf8575: gpio@20 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcf8574>;
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		lines-initial-states = <0x0710>;
+		wakeup-source;
+	};
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0		0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0	/* ENET_INT */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x1b0b0	/* ETHR_nRST */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_led0: led0grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+	    >;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b1
+		>;
+	};
+
+	pinctrl_pcf8574: pcf8575grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+	    >;
+	};
+
+	pinctrl_reg_1v8: reg1v8grp {
+	    fsl,pins = <
+		MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_3v3: reg3v3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_audio: reg-audiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_enet: reg-enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_hdmi: reg-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_mipi: reg-mipigrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>;
+	};
+
+	pinctrl_reg_pcie: reg-pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+			>;
+	};
+
+	pinctrl_reg_uart3: reguart3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_usb_h1_vbus: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_usb_otg: reg-usb-otggrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0xd17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17069
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6-logicpd-som.dtsi b/roms/u-boot/arch/arm/dts/imx6-logicpd-som.dtsi
new file mode 100644
index 000000000..7ceae3573
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6-logicpd-som.dtsi
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1837";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddcore";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddsoc";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_3v3";
+				regulator-boot-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "sw3a_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "sw3b_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_rgmii";
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-name = "gen_5v0";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "gen_vsns";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "gen_1v5";
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "vgen2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "gen_vadj_0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "gen_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "gen_vadj_1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "gen_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			coin_reg: coin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x51>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+&reg_arm
+{
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc
+{
+	vin-supply = <&sw1c_reg>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpmi_nand: gpmi-nandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <	/* Enable ARM Debugger */
+			MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15	0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1        0x130b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x13059	/* BT_EN */
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17049
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10049
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x130b0 /* WL_IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x17059 /* WLAN_EN */
+		>;
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		  compatible = "ti,wl1837";
+		  reg = <2>;
+		  interrupt-parent = <&gpio7>;
+		  interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		  tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2_7.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2_7.dtsi
new file mode 100644
index 000000000..ec633b8ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2_7.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2 board
+ * parts for 7 inch LG display connected to the LVDS port
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx6dl.dtsi"
+
+/ {
+	panel0: panel_lg {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			lvds0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_lvds0>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi
new file mode 100644
index 000000000..cb2181d9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include <imx6qdl-aristainetos2c-u-boot.dtsi>
+/ {
+	vdd_panel_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&panel0 {
+	power-supply = <&vdd_panel_reg>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_7.dts b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_7.dts
new file mode 100644
index 000000000..e1f9e8829
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_7.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+#include "imx6dl-aristainetos2_7.dtsi"
+#include "imx6qdl-aristainetos2c.dtsi"
+
+/ {
+	model = "aristainetos2c+2d i.MX6 Dual Lite Boards 7";
+	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_cslb_7-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_cslb_7-u-boot.dtsi
new file mode 100644
index 000000000..b069debc1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_cslb_7-u-boot.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include <imx6qdl-aristainetos2c_cslb-u-boot.dtsi>
+/ {
+	vdd_panel_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&panel0 {
+	power-supply = <&vdd_panel_reg>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dts b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dts
new file mode 100644
index 000000000..7f839ca5e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c cslb board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+#include "imx6dl-aristainetos2_7.dtsi"
+#include "imx6qdl-aristainetos2c_cslb.dtsi"
+
+/ {
+	model = "aristainetos2c cslb i.MX6 Dual Lite Board 7";
+	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-b1x5v2.dts b/roms/u-boot/arch/arm/dts/imx6dl-b1x5v2.dts
new file mode 100644
index 000000000..78baec1e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-b1x5v2.dts
@@ -0,0 +1,654 @@
+/*
+ * GE B1x5v2 Patient Monitor
+ *
+ * Copyright 2018-2020 GE Inc.
+ * Copyright 2018-2020 Collabora Ltd.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "ge,imx6dl-b1x5v2", "congatec,qmx6", "fsl,imx6dl";
+
+	chosen {
+		bootargs = "console=ttymxc2,115200";
+		stdout-path = &uart3;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_5v0_audio: regulator-5v0-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "5V0_AUDIO";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+
+		gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		/*
+		 * This must be always-on for da7212, which has some not properly
+		 * documented dependencies for it's speaker supply pin. The issue
+		 * manifests as speaker volume being very low.
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VCC";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		pinctrl-0 = <&pinctrl_q7_lcd_power>;
+		pinctrl-names = "default";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; // LCDPWR
+		enable-active-high;
+	};
+
+	usb_power: regulator-usb-power {
+		compatible = "regulator-fixed";
+		regulator-name = "USB POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_backlight_enable>;
+		power-supply = <&reg_lcd>;
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel {
+		compatible = "simple-panel";
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	bootcount {
+		compatible = "u-boot,bootcount-spi-flash";
+		spi-flash = <&flash>;
+		offset = <0x01003fe>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
+
+		alarm1 {
+			label = "alarm:red";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm2 {
+			label = "alarm:yellow";
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm3 {
+			label = "alarm:blue";
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_spi_cs1>;
+		gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+		active-delay-ms = <1000>;
+		inactive-delay-ms = <0>;
+		timeout-ms = <5000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2cmux>;
+		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <1>;
+
+		i2c5: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tmp112: temperature-sensor@48 {
+				compatible = "ti,tmp112";
+				reg = <0x48>;
+				interrupt-parent = <&tca6424a>;
+				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			tca6424a: gpio-controller@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&gpio7>;
+				interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_q7_gpio6>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				gpio-line-names = "GPIO_ROTOR#", "", "TMP_SENSOR_IRQ", "ACM_GPIO1", "ACM_GPIO2", "BATT_T", "", "",
+						  "ACM_GPIO3", "ACM_GPIO4", "USB1_POWER_EN", "EGPIO_CC_CTL0", "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
+						  "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL", "MARKER_EN", "EGPIO_TOUCH_RST", "", "";
+			};
+		};
+
+		i2c6: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pmic: pmic@08 {
+				compatible = "fsl,pfuze100";
+				reg = <0x08>;
+			};
+		};
+	};
+};
+
+&usbh1 {
+	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&usb_power>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&pmic {
+	regulators {
+		sw1a_reg: sw1ab {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <6250>;
+		};
+
+		sw1c_reg: sw1c {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <6250>;
+		};
+
+		sw2_reg: sw2 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		sw3a_reg: sw3a {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		sw3b_reg: sw3b {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		sw4_reg: sw4 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		swbst_reg: swbst {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5150000>;
+		};
+
+		snvs_reg: vsnvs {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vref_reg: vrefddr {
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		/* keep VGEN3, VGEN4 and VGEN5 enabled in order to maintain backward compatibility with hw-rev. A.0 */
+		vgen3_reg: vgen3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vgen4_reg: vgen4 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		vgen5_reg: vgen5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		/* supply voltage for eMMC */
+		vgen6_reg: vgen6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+
+	clock-frequency = <100000>;
+
+	rtc: m41t62@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	status = "okay";
+
+	fsl,magic-packet;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@6 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <6>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <2000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	num-cs = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0000000 0x100000>;
+		};
+
+		partition@100000 {
+			label = "user";
+			reg = <0x0100000 0x2fc000>;
+		};
+
+		partition@3fc000 {
+			label = "reserved";
+			reg = <0x03fc000 0x4000>;
+			read-only;
+		};
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	imx6qdl-congatec-qmx6 {
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_cd: sd2cdgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x1b0b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_phy_reset: phyrstgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b0	/* RGMII Phy Reset */
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1		/* Q7[123] LVDS_BLT_CTRL */
+			>;
+		};
+
+		pinctrl_q7_lcd_power: lcdpwrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x4001b0b0	/* Q7[111] LVDS_PPEN */
+			>;
+		};
+
+		pinctrl_q7_backlight_enable: blengrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0	/* Q7[112] LVDS_BLEN */
+			>;
+		};
+
+		pinctrl_q7_gpio1: q7gpio1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x4001b0b0	/* Q7[186] GPIO1 */
+			>;
+		};
+
+		pinctrl_q7_gpio3: q7gpio3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x4001b0b0	/* Q7[188] GPIO3 */
+			>;
+		};
+
+		pinctrl_q7_gpio5: q7gpio5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x4001b0b0	/* Q7[190] GPIO5 */
+			>;
+		};
+
+		pinctrl_q7_gpio6: q7gpio6grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0		/* Q7[191] GPIO6 */
+			>;
+		};
+
+		pinctrl_q7_spi_cs1: spics1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x4001b0b0	/* Q7[202] SPI_CS1# */
+			>;
+		};
+
+		pinctrl_i2cmux: i2cmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x4001b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059		/* Q7[92] USB_ID */
+			>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-brppt2.dts b/roms/u-boot/arch/arm/dts/imx6dl-brppt2.dts
new file mode 100644
index 000000000..4f1c52bff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-brppt2.dts
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 B&R Industrial Automation GmbH
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-u-boot.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <include/dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "PPT50";
+	compatible = "fsl,imx6dl";
+
+	config {
+		u-boot,spl-payload-offset = <0x100000>;
+	};
+
+	fset: factory-settings {
+		bl-version	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
+		order-no	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
+		hw-revision	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
+		serial-no	= <0>;
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x0>;
+	};
+
+	aliases {
+		ds1timing0 = &timing0;
+		ds1timing1 = &timing1;
+		ds1bkl = &backlight;
+		fset = &fset;
+		mxcfb0 = &mxcfb0;
+		touch0 = &touch0;
+		touch1 = &touch1;
+		touch2 = &touch2;
+		display_regulator = &display_regulator;
+		ldb = &ldb;
+		mmc0 = &usdhc4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mxcfb0: fb@0 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "ldb";
+		interface_pix_fmt = "RGB24";
+		default_bpp = <32>;
+		int_clk = <0>;
+		late_init = <0>;
+		rotation = <0>;
+		status = "okay";
+	};
+
+	lcd@0 {
+		compatible = "fsl,lcd";
+		vlcd-supply = <&display_regulator>;
+		ipu_id = <0>;
+		disp_id = <0>;
+		default_ifmt = "RGB24";
+		status = "disabled";
+
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: lcd {
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100>;
+		default-brightness-level = <0>;
+		status = "okay";
+
+		enable-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	beeper: pwm-beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm3 0 0 0>;
+	};
+
+	vbus1_regulator: regulator@1 {
+		u-boot,dm-preloc;
+		compatible = "regulator-fixed";
+		regulator-name = "vbus1_regulator";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+	vbus2_regulator: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus2_regulator";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+	usbhub_regulator: gpio-regulator@3 {
+		compatible = "regulator-gpio";
+		regulator-name = "ushbub_regulator";
+		enable-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		enable-at-boot;
+		states = <0 0 1 1>;
+	};
+	display_regulator: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "display_regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <1000>;
+	};
+};
+
+&fec {
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&uart1 {
+	u-boot,dm-spl;
+	u-boot,dm-preloc;
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&ldb {
+	status = "disabled";
+	vldb-supply = <&display_regulator>;
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		primary;
+		status = "okay";
+		crtc = "ipu1-di0";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: lcd {
+			};
+		};
+	};
+};
+
+&usdhc4 {
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&vbus1_regulator>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&vbus2_regulator>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touch0: egalax_i2c@2a {
+		compatible = "eeti,egalax_i2c";
+		reg = <0x2a>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <9 2>;
+		int-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	touch1: gt911@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <9 2>;
+		irq-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	touch2: i2c-hid-dev@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x0001>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <9 2>;
+		status = "disabled";
+	};
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&usdhc4 {
+	status = "okay";
+};
+
+&ecspi1 {
+	u-boot,dm-spl;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	spi-max-frequency = <25000000>;
+
+	m25p32@1 {
+		u-boot,dm-spl;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000..2b2fc360b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-cubox-i-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6dl-cubox-i-som-v15.dts
new file mode 100644
index 000000000..e09c565d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-cubox-i-som-v15.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-cubox-i.dts b/roms/u-boot/arch/arm/dts/imx6dl-cubox-i.dts
new file mode 100644
index 000000000..2b1b3e193
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-cubox-i.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi
new file mode 100644
index 000000000..fc7dffea2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2020 Harald Seiler <hws@denx.de>
+ */
+
+#include "imx6qdl-dhcom-pdk2-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-dhcom-pdk2.dts b/roms/u-boot/arch/arm/dts/imx6dl-dhcom-pdk2.dts
new file mode 100644
index 000000000..a0b51bcf3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-dhcom-pdk2.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2019 DH electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Duallite/Solo DHCOM Premium Developer Kit (2)";
+	compatible = "dh,imx6dl-dhcom-pdk2", "dh,imx6dl-dhcom", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw51xx.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw51xx.dts
new file mode 100644
index 000000000..9956d12a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw51xx.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
+	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw52xx.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw52xx.dts
new file mode 100644
index 000000000..9ea23dd54
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw52xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
+	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw53xx.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw53xx.dts
new file mode 100644
index 000000000..182e8194c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw53xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
+	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw54xx.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw54xx.dts
new file mode 100644
index 000000000..a106c4e3e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw54xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
+	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw551x.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw551x.dts
new file mode 100644
index 000000000..82d5f8572
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw551x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
+	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw552x.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw552x.dts
new file mode 100644
index 000000000..4864a36f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw552x.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw552x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X";
+	compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw553x.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw553x.dts
new file mode 100644
index 000000000..59b8afc36
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw560x.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw560x.dts
new file mode 100644
index 000000000..21bdfaf8d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw560x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
+	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw5903.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw5903.dts
new file mode 100644
index 000000000..103261ea9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
+	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw5904.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw5904.dts
new file mode 100644
index 000000000..9c6d3cd3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw5904.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
+	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw5907.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw5907.dts
new file mode 100644
index 000000000..3fa2822be
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
+	compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw5910.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw5910.dts
new file mode 100644
index 000000000..0d5e7e5da
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
+	compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw5912.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw5912.dts
new file mode 100644
index 000000000..5260e0142
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
+	compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-gw5913.dts b/roms/u-boot/arch/arm/dts/imx6dl-gw5913.dts
new file mode 100644
index 000000000..b74e533c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
+	compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-hummingboard-emmc-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000..a63f742f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-hummingboard-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard-som-v15.dts
new file mode 100644
index 000000000..66a06cf3c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-hummingboard.dts b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard.dts
new file mode 100644
index 000000000..cbd02eb48
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi
new file mode 100644
index 000000000..89fbec4d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi
@@ -0,0 +1 @@
+#include "imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 000000000..80313c13b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,55 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-som-v15.dts
new file mode 100644
index 000000000..e61ef1156
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2-som-v15.dts
@@ -0,0 +1,54 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2.dts b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2.dts
new file mode 100644
index 000000000..b12cd87f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-hummingboard2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi
new file mode 100644
index 000000000..06dd72527
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-icore-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-icore-mipi.dts b/roms/u-boot/arch/arm/dts/imx6dl-icore-mipi.dts
new file mode 100644
index 000000000..d8f3821a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-icore-mipi.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2018 Engicam S.r.l.
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi
new file mode 100644
index 000000000..bc5ed941b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-icore-rqs-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-icore-rqs.dts b/roms/u-boot/arch/arm/dts/imx6dl-icore-rqs.dts
new file mode 100644
index 000000000..73d710d34
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-icore-rqs.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-icore-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-icore-u-boot.dtsi
new file mode 100644
index 000000000..cfc9f8c74
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-icore-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-icore-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-icore.dts b/roms/u-boot/arch/arm/dts/imx6dl-icore.dts
new file mode 100644
index 000000000..80fa60607
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-icore.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-mamoj-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-mamoj-u-boot.dtsi
new file mode 100644
index 000000000..3af57ff8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-mamoj-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-mamoj.dts b/roms/u-boot/arch/arm/dts/imx6dl-mamoj.dts
new file mode 100644
index 000000000..3f6d8aa4a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-mamoj.dts
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BTicino
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "BTicino i.MX6DL Mamoj board";
+	compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			/* CPU vdd_arm core */
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* SOC vdd_soc */
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* I/O power GEN_3V3 */
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* not used */
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			/* PMIC vsnvs. EX boot mode */
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* 1v8 general power */
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 2v8 general power IMX6 */
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 3v3 Ethernet */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_19__ENET_TX_ER		0x1b0b0
+			MX6QDL_PAD_GPIO_18__ENET_RX_CLK		0x1b0b1
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3      0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_KEY_COL3__ENET_CRS		0x1b0b0
+			MX6QDL_PAD_KEY_ROW1__ENET_COL		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-mba6.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-mba6.dtsi
new file mode 100644
index 000000000..d74adf2b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-mba6.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <0>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <300>;
+	txd0-skew-ps = <120>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-mba6a.dts b/roms/u-boot/arch/arm/dts/imx6dl-mba6a.dts
new file mode 100644
index 000000000..fc9cc2c05
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-mba6a.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S on MBa6x";
+	compatible = "tq,mba6a", "tq,tqma6dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-mba6b.dts b/roms/u-boot/arch/arm/dts/imx6dl-mba6b.dts
new file mode 100644
index 000000000..a3c8d9d4c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-mba6b.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S on MBa6x";
+	compatible = "tq,mba6b", "tq,tqma6dl", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-nitrogen6x.dts b/roms/u-boot/arch/arm/dts/imx6dl-nitrogen6x.dts
new file mode 100644
index 000000000..9427ab639
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-nitrogen6x.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
+	compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-pico.dts b/roms/u-boot/arch/arm/dts/imx6dl-pico.dts
new file mode 100644
index 000000000..43763c1fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-pico.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-pinfunc.h b/roms/u-boot/arch/arm/dts/imx6dl-pinfunc.h
new file mode 100644
index 000000000..0ead323fd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-pinfunc.h
@@ -0,0 +1,1091 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6DL_PINFUNC_H
+#define __DTS_IMX6DL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
+#define MX6QDL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
+#define MX6QDL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
+#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
+#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x234 0x604 0x03c 0x11 0xff000609
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x2dc 0x6c4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-riotboard-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-riotboard-u-boot.dtsi
new file mode 100644
index 000000000..e51cd24d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-riotboard-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-riotboard.dts b/roms/u-boot/arch/arm/dts/imx6dl-riotboard.dts
new file mode 100644
index 000000000..065d3ab0f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-riotboard.dts
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 Iain Paton <ipaton0@gmail.com>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RIoTboard i.MX6S";
+	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-riotboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+			mux-int-port = <1>;
+			mux-ext-port = <3>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
+			"I2C3_SDA", "I2C4_SCL",
+		"I2C4_SDA", "", "", "", "", "", "", "",
+		"", "PWM3", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "USB_OTG_VBUS", "",
+		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
+		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
+			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
+		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
+			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
+			"GPIO5_07",
+		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
+			"CSPI2_CS0", "CSPI2_CLK", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pmic: pf0100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
+
+		regulators {
+			reg_vddcore: sw1ab {				/* VDDARM_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_vddsoc: sw1c {				/* VDDSOC_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_vtt: sw4 {				/* MIPI conn */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_5v_600mA: swbst {				/* not used */
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {				/* VREF_DDR */
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1_1v5: vgen1 {				/* not used */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			reg_vgen3_2v8: vgen3 {				/* not used */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clocks = <&clks 116>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx6-riotboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
+				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
+			>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
new file mode 100644
index 000000000..d75fcc101
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-sabreauto.dts b/roms/u-boot/arch/arm/dts/imx6dl-sabreauto.dts
new file mode 100644
index 000000000..660d52a24
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-sabreauto.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
+	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-sabresd-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
new file mode 100644
index 000000000..e4d7d2819
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-sabresd.dts b/roms/u-boot/arch/arm/dts/imx6dl-sabresd.dts
new file mode 100644
index 000000000..cd6bbf22a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-sabresd.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
+	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-tqma6a.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-tqma6a.dtsi
new file mode 100644
index 000000000..df87b381c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-tqma6a.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-tqma6b.dtsi b/roms/u-boot/arch/arm/dts/imx6dl-tqma6b.dtsi
new file mode 100644
index 000000000..47ffbc4d9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-tqma6b.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-udoo.dts b/roms/u-boot/arch/arm/dts/imx6dl-udoo.dts
new file mode 100644
index 000000000..d871cac17
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-udoo.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Dual-lite Board";
+	compatible = "udoo,imx6dl-udoo", "fsl,imx6dl";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl-wandboard-revd1.dts b/roms/u-boot/arch/arm/dts/imx6dl-wandboard-revd1.dts
new file mode 100644
index 000000000..6d1d863c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl-wandboard-revd1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board revD1";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6dl.dtsi b/roms/u-boot/arch/arm/dts/imx6dl.dtsi
new file mode 100644
index 000000000..f0607eb41
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6dl.dtsi
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl-pinfunc.h"
+#include "imx6qdl.dtsi"
+
+/ {
+	aliases {
+		i2c3 = &i2c4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	soc {
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		aips1: aips-bus@2000000 {
+			iomuxc: iomuxc@20e0000 {
+				compatible = "fsl,imx6dl-iomuxc";
+			};
+
+			pxp: pxp@20f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epdc: epdc@20f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips2: aips-bus@2100000 {
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6DL_CLK_I2C4>;
+				status = "disabled";
+			};
+		};
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu1_di0>, <&ipu1_di1>;
+	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			ipu1_csi0_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@5 {
+			reg = <5>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu1_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi1_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi1_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi1_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			ipu1_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			ipu1_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@5 {
+			reg = <5>;
+
+			ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+				remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+			};
+		};
+	};
+};
+
+&gpt {
+	compatible = "fsl,imx6dl-gpt";
+};
+
+&hdmi {
+	compatible = "fsl,imx6dl-hdmi";
+};
+
+&ipu1_csi1 {
+	ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+		remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+	};
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+};
+
+&mipi_csi {
+	port@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+
+		mipi_vc0_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+		};
+	};
+
+	port@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc1_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+		};
+
+		mipi_vc1_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc2_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+		};
+
+		mipi_vc2_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc3_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+		};
+
+		mipi_vc3_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */
+			<0x34 0x00000038>, /* IPU_CSI1_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
+&vpu {
+	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-b450v3.dts b/roms/u-boot/arch/arm/dts/imx6q-b450v3.dts
new file mode 100644
index 000000000..995caa8a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-b450v3.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B450v3";
+	compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pca9539 {
+	P04 {
+		gpio-hog;
+		gpios = <4 0>;
+		output-low;
+		line-name = "PCA9539-P04";
+	};
+
+	P07 {
+		gpio-hog;
+		gpios = <7 0>;
+		output-low;
+		line-name = "PCA9539-P07";
+	};
+};
+
+&pci_root {
+	/* Intel Corporation I210 Gigabit Network Connection */
+	switch_nic: ethernet@3,0 {
+		compatible = "pci8086,1533";
+		reg = <0x00010000 0 0 0 0>;
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "enacq";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport1";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+
+	port@5 {
+		reg = <5>;
+		label = "enembc";
+
+		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
+		fixed-link {
+			speed = <100>;
+			full-duplex;
+		};
+	};
+};
+
+#include "imx6q-bx50v3-uboot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-b650v3.dts b/roms/u-boot/arch/arm/dts/imx6q-b650v3.dts
new file mode 100644
index 000000000..95a61347d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-b650v3.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B650v3";
+	compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pca9539 {
+	P07 {
+		gpio-hog;
+		gpios = <7 0>;
+		output-low;
+		line-name = "PCA9539-P07";
+	};
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <55>;
+	fsl,tx-cal-45-dp-ohms = <55>;
+	fsl,tx-d-cal = <100>;
+};
+
+&pci_root {
+	/* Intel Corporation I210 Gigabit Network Connection */
+	switch_nic: ethernet@3,0 {
+		compatible = "pci8086,1533";
+		reg = <0x00010000 0 0 0 0>;
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "enacq";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport1";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+
+	port@5 {
+		reg = <5>;
+		label = "enembc";
+
+		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
+		fixed-link {
+			speed = <100>;
+			full-duplex;
+		};
+	};
+};
+
+#include "imx6q-bx50v3-uboot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-b850v3.dts b/roms/u-boot/arch/arm/dts/imx6q-b850v3.dts
new file mode 100644
index 000000000..641682523
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-b850v3.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B850v3";
+	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&stdp4028_in>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pca9547_ddc: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux2_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		mux2_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		mux2_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux2_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		mux2_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		mux2_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux2_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux2_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&mux2_i2c1>;
+};
+
+&mux1_i2c1 {
+	ads7830@4a {
+		compatible = "ti,ads7830";
+		reg = <0x4a>;
+	};
+};
+
+&mux2_i2c2 {
+	clock-frequency = <100000>;
+
+	stdp2690@72 {
+		compatible = "megachips,stdp2690-ge-b850v3-fw";
+		reg = <0x72>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				stdp2690_in: endpoint {
+					remote-endpoint = <&stdp4028_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				stdp2690_out: endpoint {
+					/* Connector for external display */
+				};
+			};
+		};
+	};
+
+	stdp4028@73 {
+		compatible = "megachips,stdp4028-ge-b850v3-fw";
+		reg = <0x73>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				stdp4028_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				stdp4028_out: endpoint {
+					remote-endpoint = <&stdp2690_in>;
+				};
+			};
+		};
+	};
+};
+
+&pca9539 {
+	P10 {
+		gpio-hog;
+		gpios = <8 0>;
+		output-low;
+		line-name = "PCA9539-P10";
+	};
+
+	P11 {
+		gpio-hog;
+		gpios = <9 0>;
+		output-low;
+		line-name = "PCA9539-P11";
+	};
+};
+
+&pci_root {
+	/* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */
+	bridge@1,0 {
+		compatible = "pci10b5,8605";
+		reg = <0x00010000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		bridge@2,1 {
+			compatible = "pci10b5,8605";
+			reg = <0x00020800 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			/* Intel Corporation I210 Gigabit Network Connection */
+			ethernet@3,0 {
+				compatible = "pci8086,1533";
+				reg = <0x00030000 0 0 0 0>;
+			};
+		};
+
+		bridge@2,2 {
+			compatible = "pci10b5,8605";
+			reg = <0x00021000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			/* Intel Corporation I210 Gigabit Network Connection */
+			switch_nic: ethernet@4,0 {
+				compatible = "pci8086,1533";
+				reg = <0x00040000 0 0 0 0>;
+			};
+		};
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "eneport1";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport2";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+};
+
+#include "imx6q-bx50v3-uboot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-ba16.dtsi b/roms/u-boot/arch/arm/dts/imx6q-ba16.dtsi
new file mode 100644
index 000000000..9da2bb6e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-ba16.dtsi
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Support for imx6 based Advantech DMS-BA16 Qseven module
+ *
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_display>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: n25q032@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "spare";
+			reg = <0xd0000 0x320000>;
+		};
+
+		partition@3f0000 {
+			label = "mfg";
+			reg = <0x3f0000 0x10000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		regulators {
+			vdd_bcore1: bcore1 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bcore2: bcore2 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bmem: bmem {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bio: bio {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	fsl,tx-swing-full = <103>;
+	fsl,tx-swing-low = <103>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
+	bus-width = <8>;
+	vmmc-supply = <&vdd_bperi>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_display: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x1b0b0
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			/* SPI1 CS */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x1b0b0
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x1b0b0
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			/* FEC Reset */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
+			/* AR8033 Interrupt */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05        0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIO 0-7 */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00  0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01  0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02  0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03  0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04  0x1b0b0
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05  0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06  0x1b0b0
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07  0x1b0b0
+			/* SUS_S3_OUT to CPLD */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe Reset */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			/* PCIe Wake */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC Interrupt */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			/* HUB_RESET */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
+			/* uSDHC2 CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_reset: usdhc3grp-reset {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17059
+			/* uSDHC4 CD */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+			/* uSDHC4 SDIO PWR */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+			/* uSDHC4 SDIO WP */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			/* uSDHC4 SDIO LED */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-bx50v3-uboot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-bx50v3-uboot.dtsi
new file mode 100644
index 000000000..b54e8e6ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-bx50v3-uboot.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Collabora Ltd
+ * Copyright 2019 General Electric Company
+ */
+
+/ {
+	bootcount {
+		compatible = "u-boot,bootcount-i2c-eeprom";
+		i2c-eeprom = <&bootcount>;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+
+	panel-lvds0 {
+		compatible = "simple-panel";
+	};
+};
+
+&eeprom {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		vpd@0 {
+			reg = <0 800>;
+		};
+
+		bootcount: bootcount {
+			reg = <1022 2>;
+		};
+	};
+};
+
+/*
+ * This is not done in imx6q-ba16.dtsi, since that file is shared
+ * with the kernel and the kernel should not reset the PHY, since
+ * it lacks support for configuring the reserved registeres to
+ * avoid a board specific voltage peak issue.
+ */
+&fec {
+	phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-bx50v3.dts b/roms/u-boot/arch/arm/dts/imx6q-bx50v3.dts
new file mode 100644
index 000000000..a44d7004c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-bx50v3.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2018 General Electric Company
+ * Based on imx6q-ba16.dtsi and imx6q-bx50v3.dtsi from kernel 4.20.5.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric Bx50v3";
+	compatible = "ge,imx6q-bx50v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-bx50v3.dtsi b/roms/u-boot/arch/arm/dts/imx6q-bx50v3.dtsi
new file mode 100644
index 000000000..19829613c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-bx50v3.dtsi
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q-ba16.dtsi"
+
+/ {
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	mdio0: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085"; /* 88e6240*/
+			reg = <0>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+				};
+			};
+		};
+	};
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: m25p80@0 {
+		compatible = "atmel,at25";
+		spi-max-frequency = <10000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+
+	pca9547: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux1_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ads7830: ads7830@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+
+			mma8453: mma8453@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+			};
+		};
+
+		mux1_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+
+			mpl3115: mpl3115@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+		};
+
+		mux1_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux1_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				clocks = <&mclk>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_3p3v>;
+			};
+		};
+
+		mux1_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pca9539: pca9539@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio2>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+				P12 {
+					gpio-hog;
+					gpios = <10 0>;
+					output-low;
+					line-name = "PCA9539-P12";
+				};
+
+				P13 {
+					gpio-hog;
+					gpios = <11 0>;
+					output-low;
+					line-name = "PCA9539-P13";
+				};
+
+				P14 {
+					gpio-hog;
+					gpios = <12 0>;
+					output-low;
+					line-name = "PCA9539-P14";
+				};
+
+				P15 {
+					gpio-hog;
+					gpios = <13 0>;
+					output-low;
+					line-name = "PCA9539-P15";
+				};
+
+				P16 {
+					gpio-hog;
+					gpios = <14 0>;
+					output-low;
+					line-name = "PCA9539-P16";
+				};
+
+				P17 {
+					gpio-hog;
+					gpios = <15 0>;
+					output-low;
+					line-name = "PCA9539-P17";
+				};
+			};
+		};
+
+		mux1_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux1_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux1_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+};
+
+&iomuxc {
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+		>;
+	};
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&pcie {
+	/* Synopsys, Inc. Device */
+	pci_root: root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+	};
+};
+
+#include "imx6q-bx50v3-uboot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-cm-fx6.dts b/roms/u-boot/arch/arm/dts/imx6q-cm-fx6.dts
new file mode 100644
index 000000000..1f574c5eb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-cm-fx6.dts
@@ -0,0 +1,403 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ *
+ * Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "CompuLab CM-FX6";
+	compatible = "compulab,cm-fx6", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat-led {
+			label = "Heartbeat";
+			gpios = <&gpio2 31 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	awnh387_pwrseq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwrseq>;
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-pcie-power-on-gpio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: usb_otg_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board analog audio";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"MICIN", "Mic Bias",
+			"Mic Bias", "Mic Jack";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound_master: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+			system-clock-frequency = <2822400>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+		spdif-in;
+	};
+};
+
+/*
+ * The U-Boot: audio mux node has been removed because the required dt-bindings
+ * header file is not present in the U-Boot.
+ */
+
+&cpu0 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	wm8731: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__AUD4_RXC   0x17059
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x17059
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x17059
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x17059
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwrseq: pwrseqgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_power_on_gpio>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi2 {
+	assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>,
+			<&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <786432000>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	mmc-pwrseq = <&awnh387_pwrseq>;
+	non-removable;
+	/*
+	 * If the OS probes the Bluetooth AMP function advertised on this bus
+	 * but the firmware in place does not support it, the WiFi/BT module
+	 * gets unresponsive.
+	 * Users who configured their OS properly can enable this node to gain
+	 * WiFi and/or plain Bluetooth support.
+	 */
+	status = "disabled";
+};
+
+/* The U-Boot: enable usdhc3 for mmc boot */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000..3e59ebbb3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-cubox-i-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6q-cubox-i-som-v15.dts
new file mode 100644
index 000000000..dab70d123
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-cubox-i-som-v15.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-cubox-i.dts b/roms/u-boot/arch/arm/dts/imx6q-cubox-i.dts
new file mode 100644
index 000000000..1c7b262e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-cubox-i.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi
new file mode 100644
index 000000000..026342df5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2019 Claudius Heine <ch@denx.de>
+ */
+
+#include "imx6qdl-dhcom-pdk2-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-dhcom-pdk2.dts b/roms/u-boot/arch/arm/dts/imx6q-dhcom-pdk2.dts
new file mode 100644
index 000000000..5bab2db65
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-dhcom-pdk2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2015-2019 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad/Dual DHCOM Premium Developer Kit (2)";
+	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
diff --git a/roms/u-boot/arch/arm/dts/imx6q-display5-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-display5-u-boot.dtsi
new file mode 100644
index 000000000..aa660b5ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-display5-u-boot.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/*
+ * The minimal augmentation DTS U-Boot file to allow UART5
+ * configuration in the pre-relocation stage of U-Boot
+ * proper.
+ *
+ * As the same UART is already configured in SPL, we don't need
+ * setup pinmux for it again.
+ */
+
+/ {
+	aliases {
+		mmc0 = &usdhc4;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+
+		aips-bus@2100000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+};
+
+&i2c3 {
+	at24@50 {
+		u-boot,i2c-offset-len = <2>;
+	};
+};
+
+&uart5 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-display5.dts b/roms/u-boot/arch/arm/dts/imx6q-display5.dts
new file mode 100644
index 000000000..4e2aa363e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-display5.dts
@@ -0,0 +1,370 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Liebherr (LWN) display5 i.MX6 Quad Board";
+	compatible = "lwn,display5", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
+	status = "okay";
+
+	s25fl256s: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "SPL (spi)";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+		partition@1 {
+			label = "u-boot (spi)";
+			reg = <0x20000 0x100000>;
+			read-only;
+		};
+		partition@2 {
+			label = "uboot-env (spi)";
+			reg = <0x120000 0x10000>;
+		};
+		partition@3 {
+			label = "uboot-envr (spi)";
+			reg = <0x130000 0x10000>;
+		};
+		partition@4 {
+			label = "linux-recovery (spi)";
+			reg = <0x140000 0x800000>;
+		};
+		partition@5 {
+			label = "swupdate-fitImg (spi)";
+			reg = <0x940000 0x400000>;
+		};
+		partition@6 {
+			label = "swupdate-initramfs (spi)";
+			reg = <0xD40000 0x800000>;
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethernet_phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@0 {
+			compatible = "marvell,88E1510";
+			device_type = "ethernet-phy";
+			/* Set LED0 control: */
+			/* On - Link, Blink - Activity, Off - No Link */
+			marvell,reg-init = <3 0x10 0 0x1011>;
+			max-speed = <100>;
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: tfa9879@6c {
+		#sound-dai-cells = <0>;
+		compatible = "nxp,tfa9879";
+		reg = <0x6C>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	at24@50 {
+		compatible = "atmel,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2_flwp: ecspi2flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA    0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET	0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw51xx.dts b/roms/u-boot/arch/arm/dts/imx6q-gw51xx.dts
new file mode 100644
index 000000000..f80173458
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw51xx.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
+	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw52xx.dts b/roms/u-boot/arch/arm/dts/imx6q-gw52xx.dts
new file mode 100644
index 000000000..6e1c493c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw52xx.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
+	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw53xx.dts b/roms/u-boot/arch/arm/dts/imx6q-gw53xx.dts
new file mode 100644
index 000000000..f13df8e9c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw53xx.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
+	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw54xx.dts b/roms/u-boot/arch/arm/dts/imx6q-gw54xx.dts
new file mode 100644
index 000000000..d5d46908c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw54xx.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+#include <dt-bindings/media/tda1997x.h>
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
+	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+
+	sound-digital {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
+		};
+	};
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+
+	hdmi_receiver: hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&sw4_reg>;
+		DVDD-supply = <&sw4_reg>;
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same cycle
+		 * which we map to VP[15:08]<->CSI_DATA[19:12]
+		 */
+		nxp,vidout-portcfg =
+			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+	bus-width = <16>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1_csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+
+	pinctrl_tda1997x: tda1997xgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw551x.dts b/roms/u-boot/arch/arm/dts/imx6q-gw551x.dts
new file mode 100644
index 000000000..2c7feeef1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw551x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
+	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw552x.dts b/roms/u-boot/arch/arm/dts/imx6q-gw552x.dts
new file mode 100644
index 000000000..c973b7304
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw552x.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw552x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW552X";
+	compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw553x.dts b/roms/u-boot/arch/arm/dts/imx6q-gw553x.dts
new file mode 100644
index 000000000..e9c224cea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw560x.dts b/roms/u-boot/arch/arm/dts/imx6q-gw560x.dts
new file mode 100644
index 000000000..735f2bbf1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw560x.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
+	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw5903.dts b/roms/u-boot/arch/arm/dts/imx6q-gw5903.dts
new file mode 100644
index 000000000..a182e4cb0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
+	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw5904.dts b/roms/u-boot/arch/arm/dts/imx6q-gw5904.dts
new file mode 100644
index 000000000..ca1e2ae33
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw5904.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
+	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw5907.dts b/roms/u-boot/arch/arm/dts/imx6q-gw5907.dts
new file mode 100644
index 000000000..b25526ef5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
+	compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw5910.dts b/roms/u-boot/arch/arm/dts/imx6q-gw5910.dts
new file mode 100644
index 000000000..6aafa2fce
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
+	compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw5912.dts b/roms/u-boot/arch/arm/dts/imx6q-gw5912.dts
new file mode 100644
index 000000000..4dcbd943c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
+	compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-gw5913.dts b/roms/u-boot/arch/arm/dts/imx6q-gw5913.dts
new file mode 100644
index 000000000..6f511f166
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
+	compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-hummingboard-emmc-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6q-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000..c51b4e4fd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-hummingboard-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6q-hummingboard-som-v15.dts
new file mode 100644
index 000000000..e4132d62f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-hummingboard-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-hummingboard.dts b/roms/u-boot/arch/arm/dts/imx6q-hummingboard.dts
new file mode 100644
index 000000000..8c9e94e64
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-hummingboard.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi
new file mode 100644
index 000000000..89fbec4d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi
@@ -0,0 +1 @@
+#include "imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 000000000..1998ebfa0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,63 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-som-v15.dts b/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-som-v15.dts
new file mode 100644
index 000000000..d3ad7329c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-hummingboard2-som-v15.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-hummingboard2.dts b/roms/u-boot/arch/arm/dts/imx6q-hummingboard2.dts
new file mode 100644
index 000000000..5249f53dc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-hummingboard2.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi
new file mode 100644
index 000000000..06dd72527
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-icore-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-icore-mipi.dts b/roms/u-boot/arch/arm/dts/imx6q-icore-mipi.dts
new file mode 100644
index 000000000..d51745268
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-icore-mipi.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2017 Engicam S.r.l.
+ * Copyright (C) 2017 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+};
+
+&ov5640 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-icore-ofcap10.dts b/roms/u-boot/arch/arm/dts/imx6q-icore-ofcap10.dts
new file mode 100644
index 000000000..81cc346dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-icore-ofcap10.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <60000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <40>;
+				hfront-porch = <40>;
+				vback-porch = <10>;
+				vfront-porch = <3>;
+				hsync-len = <80>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-icore-ofcap12.dts b/roms/u-boot/arch/arm/dts/imx6q-icore-ofcap12.dts
new file mode 100644
index 000000000..241811c52
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-icore-ofcap12.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "koe,tx31d200vm0baa";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		reg = <0>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi
new file mode 100644
index 000000000..bc5ed941b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-icore-rqs-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-icore-rqs.dts b/roms/u-boot/arch/arm/dts/imx6q-icore-rqs.dts
new file mode 100644
index 000000000..cf6ba724f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-icore-rqs.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ * Copyright (C) 2015 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-icore-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-icore-u-boot.dtsi
new file mode 100644
index 000000000..cfc9f8c74
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-icore-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-icore-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-icore.dts b/roms/u-boot/arch/arm/dts/imx6q-icore.dts
new file mode 100644
index 000000000..fe28c3cf5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-icore.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <60000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <30>;
+				hfront-porch = <30>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <64>;
+				vsync-len = <20>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-kp-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-kp-u-boot.dtsi
new file mode 100644
index 000000000..e6b71b22a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-kp-u-boot.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+/ {
+	clocks {
+		u-boot,dm-spl;
+		osc {
+			u-boot,dm-spl;
+		};
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+};
+
+&clks {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc4 {
+	u-boot,dm-spl;
+};
+
+&uart1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc4 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-kp.dts b/roms/u-boot/arch/arm/dts/imx6q-kp.dts
new file mode 100644
index 000000000..48ade9eea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-kp.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "K+P iMX6Q";
+	compatible = "kp,imx6-kp", "fsl,imx6";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc4;
+		usb1 = &usbh1;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		green {
+			label = "green";
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		red {
+			label = "red";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	fsl,enet-loopback-clk; /* anatop reference clk via PAD loopback */
+	fsl,enet-freq = <1>; /* ENET_25MHZ  = 0, ENET_50MHZ  = 1 */
+			     /* ENET_100MHZ = 2, ENET_125MHZ = 3 */
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	ds1307: rtc@32 {
+		compatible = "dallas,ds1307";
+		reg = <0x32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC	0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0	0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1	0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2	0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3	0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC	0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0	0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1	0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2	0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3	0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x4001b0b0
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16          0x4001b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		 >;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x1b0b1
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17019
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10019
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17019
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17019
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17019
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17019
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x20000
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x20000
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17019
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10019
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17019
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17019
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17019
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17019
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17019
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17019
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17019
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17019
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-logicpd-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-logicpd-u-boot.dtsi
new file mode 100644
index 000000000..ee44ed91f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-logicpd-u-boot.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Logic PD <aford173@gmail.com>
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&uart1 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-logicpd.dts b/roms/u-boot/arch/arm/dts/imx6q-logicpd.dts
new file mode 100644
index 000000000..45eb0b7f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-logicpd.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6-logicpd-som.dtsi"
+#include "imx6-logicpd-baseboard.dtsi"
+
+/ {
+	model = "Logic PD i.MX6QD SOM-M3";
+	compatible = "fsl,imx6q";
+
+	backlight: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 20000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel-lvds0 {
+		compatible = "okaya,rs800480t-7x0gp";
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_lcd: regulator-lcd {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_reg>;
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+		startup-delay-us = <500000>;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_reset>;
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_lcd>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&reg_hdmi {
+	regulator-always-on;	/* Without this, the level shifter on HDMI doesn't turn on */
+};
+
+&iomuxc {
+	pinctrl_lcd_reg: lcdreg {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x100b0	/* R_LCD_PANEL_PWR */
+		>;
+	};
+
+	pinctrl_lcd_reset: lcdreset {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x100b0	/* LCD_nRESET */
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0	/* TOUCH_nPINTDAV */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-marsboard-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-marsboard-u-boot.dtsi
new file mode 100644
index 000000000..e51cd24d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-marsboard-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-marsboard.dts b/roms/u-boot/arch/arm/dts/imx6q-marsboard.dts
new file mode 100644
index 000000000..05ee28388
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-marsboard.dts
@@ -0,0 +1,417 @@
+/*
+ * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Embest MarS Board i.MX6Dual";
+	compatible = "embest,imx6q-marsboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user1 {
+			label = "imx6:green:user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "imx6:green:user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0	/* CAM_MCLK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000b1	/* CS0 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* RGMII_nRST */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* LED1 */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* LED2 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* USB OTG POWER ENABLE */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17009
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10009
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17009
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17009
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17009
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17009
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17009
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-mba6.dtsi b/roms/u-boot/arch/arm/dts/imx6q-mba6.dtsi
new file mode 100644
index 000000000..76e8410f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-mba6.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <120>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <180>;
+	txd0-skew-ps = <360>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-mba6a.dts b/roms/u-boot/arch/arm/dts/imx6q-mba6a.dts
new file mode 100644
index 000000000..7983ad94f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-mba6a.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,mba6a", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-mba6b.dts b/roms/u-boot/arch/arm/dts/imx6q-mba6b.dts
new file mode 100644
index 000000000..9d117dd19
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-mba6b.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,mba6b", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-mccmon6.dts b/roms/u-boot/arch/arm/dts/imx6q-mccmon6.dts
new file mode 100644
index 000000000..27cde5611
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-mccmon6.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Liebherr Nenzig (LWN) iMX6Q";
+	compatible = "lwn,imx6-mccmon6", "fsl,imx6";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		spi0 = &ecspi3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+	spi-max-frequency = <25000000>;
+	status = "okay";
+
+	s25sl032p: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <1>;
+	/* KSZ9031 PHY SKEW setup - old values * 60 ps */
+	rxc-skew-ps = <1860>;
+	txc-skew-ps = <1860>;
+	txen-skew-ps = <900>;
+	rxdv-skew-ps = <900>;
+	rxd0-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd3-skew-ps = <180>;
+	txd0-skew-ps = <120>;
+	txd1-skew-ps = <300>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <120>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		use-advanced-sector-protection;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000
+		>;
+	};
+
+	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17059
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_nor: weimnorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B	0xb060
+			MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-nitrogen6x.dts b/roms/u-boot/arch/arm/dts/imx6q-nitrogen6x.dts
new file mode 100644
index 000000000..ebb22a404
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-nitrogen6x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
+	compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-novena.dts b/roms/u-boot/arch/arm/dts/imx6q-novena.dts
new file mode 100644
index 000000000..35383c9a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-novena.dts
@@ -0,0 +1,797 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kosagi Novena Dual/Quad";
+	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 10000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_novena>;
+		power-supply = <&reg_lvds_lcd>;
+		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+		default-brightness-level = <12>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+		user-button {
+			label = "User Button";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0>;	/* SW_LID */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_novena>;
+
+		heartbeat {
+			label = "novena:white:panel";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n133hse-ea1", "simple-panel";
+		backlight = <&backlight>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio_codec: regulator-audio-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "es8328-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <400000>;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-display-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_lcd: regulator-lvds-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lvds-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie-bus-power";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sata: regulator-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <10000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-es8328";
+		model = "imx-audio-es8328";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-amp-supply = <&reg_audio_codec>;
+		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+			"Speaker", "audio-amp",
+			"Headphone", "ROUT1",
+			"Headphone", "LOUT1",
+			"LINPUT1", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <0x1>;
+		mux-ext-port = <0x3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_novena>;
+	status = "okay";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_novena>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_novena>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	rxc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	txen-skew-ps = <0>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <3000>;
+	txd1-skew-ps = <3000>;
+	txd2-skew-ps = <3000>;
+	txd3-skew-ps = <3000>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_novena>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_novena>;
+	status = "okay";
+
+	accel: mma8452@1c {
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sbs_battery: bq20z75@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,i2c-retry-count = <50>;
+	};
+
+	touch: stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe_novena>;
+		vio-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_novena>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw1c: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3a: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3b: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw4: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_snvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vref: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen3: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_vgen4: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_novena>;
+	status = "okay";
+
+	codec: es8328@11 {
+		compatible = "everest,es8328";
+		reg = <0x11>;
+		DVDD-supply = <&reg_audio_codec>;
+		AVDD-supply = <&reg_audio_codec>;
+		PVDD-supply = <&reg_audio_codec>;
+		HPVDD-supply = <&reg_audio_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sound_novena>;
+		clocks = <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO1_SEL>,
+				  <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+				  <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+					 <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+					 <&clks IMX6QDL_CLK_OSC>,
+					 <&clks IMX6QDL_CLK_CKO1_PODF>;
+		assigned-clock-rates = <0 0 722534400 22579200>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_novena>;
+	linux,keymap = <
+		MATRIX_KEY(1, 1, KEY_CONFIG)
+	>;
+	status = "okay";
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		fsl,panel = <&panel>;
+		status = "okay";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_novena>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sata {
+	target-supply = <&reg_sata>;
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <8>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_novena>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_novena>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_novena>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_novena>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_swbst>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_novena>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_novena>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux_novena: audmuxgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_novena: backlightgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3_novena: ecspi3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_enet_novena: enetgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b028
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b028
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b028
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* Ethernet reset */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_gpio: fpgagpiogrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_eim: fpgaeimgrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0f1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0f1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0f1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0f1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0f1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0f1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0f1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0f1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0f1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0f1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0f1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0f1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0f1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0f1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0f1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0f1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0f1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0f1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0f1
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0f1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0f1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb0f1
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0f1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0f1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb0f1
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK		0xb0f1
+		>;
+	};
+
+	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+		fsl,pins = <
+			/* User button */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			/* PCIe Wakeup */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1f0e0
+			/* Lid switch */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_novena: hdmigrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1_novena: i2c1grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_novena: i2c2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_novena: i2c3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp_novena: kppgrp-novena {
+		fsl,pins = <
+			/* Front panel button */
+			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
+			/* Fake column driver, not connected */
+			MX6QDL_PAD_KEY_COL1__KEY_COL1		0x1b0b1
+		>;
+	};
+
+	pinctrl_leds_novena: ledsgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
+		>;
+	};
+
+	pinctrl_pcie_novena: pciegrp-novena {
+		fsl,pins = <
+			/* Reset */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
+			/* Power On */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1
+			/* Wifi kill */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1
+		>;
+	};
+
+	pinctrl_sata_novena: satagrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
+		>;
+	};
+
+	pinctrl_senoko_novena: senokogrp-novena {
+		fsl,pins = <
+			/* Senoko IRQ line */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
+			/* Senoko reset line */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1
+		>;
+	};
+
+	pinctrl_sound_novena: soundgrp-novena {
+		fsl,pins = <
+			/* Audio power regulator */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+			/* Headphone plug */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_stmpe_novena: stmpegrp-novena {
+		fsl,pins = <
+			/* Touchscreen interrupt */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_novena: uart2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_novena: uart3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_novena: uart4grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_novena: usbotggrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_novena: usdhc2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			/* Write protect */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+			/* Card detect */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3_novena: usdhc3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-phytec-mira-rdk-nand-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-phytec-mira-rdk-nand-u-boot.dtsi
new file mode 100644
index 000000000..5a64f86b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-phytec-mira-rdk-nand-u-boot.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020
+ * Niel Fourie, DENX Software Engineering, lusus@denx.de.
+ */
+#include "imx6qdl-u-boot.dtsi"
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio6 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&ecspi1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_ecspi1 {
+	u-boot,dm-spl;
+};
+
+&m25p80 {
+	u-boot,dm-spl;
+};
+
+&gpmi {
+	fsl,legacy-bch-geometry;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts b/roms/u-boot/arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts
new file mode 100644
index 000000000..65d2e483c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
+	compatible = "phytec,imx6q-pbac06-nand", "phytec,imx6q-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-pico.dts b/roms/u-boot/arch/arm/dts/imx6q-pico.dts
new file mode 100644
index 000000000..bfc6f9c74
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-pico.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-pinfunc.h b/roms/u-boot/arch/arm/dts/imx6q-pinfunc.h
new file mode 100644
index 000000000..9fc6120a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-pinfunc.h
@@ -0,0 +1,1047 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6Q_PINFUNC_H
+#define __DTS_IMX6Q_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
+#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
+#define MX6QDL_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
+#define MX6QDL_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x230 0x600 0x03c 0x11 0xff000609
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx6q-sabreauto-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
new file mode 100644
index 000000000..d75fcc101
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-sabreauto.dts b/roms/u-boot/arch/arm/dts/imx6q-sabreauto.dts
new file mode 100644
index 000000000..6e981a3e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-sabreauto.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-sabrelite.dts b/roms/u-boot/arch/arm/dts/imx6q-sabrelite.dts
new file mode 100644
index 000000000..91e031c7c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-sabrelite.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Lite Board";
+	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-sabresd-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6q-sabresd-u-boot.dtsi
new file mode 100644
index 000000000..e4d7d2819
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-sabresd-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6q-sabresd.dts b/roms/u-boot/arch/arm/dts/imx6q-sabresd.dts
new file mode 100644
index 000000000..eec944673
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-sabresd.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
+	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-tbs2910.dts b/roms/u-boot/arch/arm/dts/imx6q-tbs2910.dts
new file mode 100644
index 000000000..7d0a0676f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-tbs2910.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2014-2019 Soeren Moch <smoch@web.de>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TBS2910 Matrix ARM mini PC";
+	compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		usb0 = &usbotg;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      3000 1>;
+	};
+
+	ir_recv {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		blue {
+			label = "blue_status_led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "On-board Codec";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc: ds1307@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <16>;
+	fsl,receive-eq-mdB = <3000>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5p0v>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
+		>;
+	};
+
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-tqma6a.dtsi b/roms/u-boot/arch/arm/dts/imx6q-tqma6a.dtsi
new file mode 100644
index 000000000..b252077f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-tqma6a.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/imx6q-tqma6b.dtsi b/roms/u-boot/arch/arm/dts/imx6q-tqma6b.dtsi
new file mode 100644
index 000000000..107a9eb03
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-tqma6b.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/imx6q-udoo.dts b/roms/u-boot/arch/arm/dts/imx6q-udoo.dts
new file mode 100644
index 000000000..52e9f4a21
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-udoo.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Quad Board";
+	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q-wandboard-revd1.dts b/roms/u-boot/arch/arm/dts/imx6q-wandboard-revd1.dts
new file mode 100644
index 000000000..55331021d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q-wandboard-revd1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board revD1";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6q.dtsi b/roms/u-boot/arch/arm/dts/imx6q.dtsi
new file mode 100644
index 000000000..71543a4a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6q.dtsi
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q-pinfunc.h"
+#include "imx6qdl.dtsi"
+
+/ {
+	aliases {
+		ipu1 = &ipu2;
+		video1 = &ipu2;
+		spi4 = &ecspi5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	soc {
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x40000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		aips-bus@2000000 { /* AIPS1 */
+			spba-bus@2000000 {
+				ecspi5: spi@2018000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6Q_CLK_ECSPI5>,
+						 <&clks IMX6Q_CLK_ECSPI5>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			iomuxc: iomuxc@20e0000 {
+				compatible = "fsl,imx6q-iomuxc";
+			};
+		};
+
+		sata: sata@2200000 {
+			compatible = "fsl,imx6q-ahci";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_SATA>,
+				 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+				 <&clks IMX6QDL_CLK_AHB>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
+		gpu_vg: gpu@2204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+			#cooling-cells = <2>;
+		};
+
+		ipu2: ipu@2800000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx6q-ipu";
+			reg = <0x02800000 0x400000>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_IPU2>,
+				 <&clks IMX6QDL_CLK_IPU2_DI0>,
+				 <&clks IMX6QDL_CLK_IPU2_DI1>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 4>;
+
+			ipu2_csi0: port@0 {
+				reg = <0>;
+
+				ipu2_csi0_from_mipi_vc2: endpoint {
+					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+				};
+			};
+
+			ipu2_csi1: port@1 {
+				reg = <1>;
+
+				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+				};
+			};
+
+			ipu2_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu2_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu2_di0_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_2>;
+				};
+
+				ipu2_di0_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_2>;
+				};
+
+				ipu2_di0_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_2>;
+				};
+
+				ipu2_di0_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_2>;
+				};
+			};
+
+			ipu2_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu2_di1_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_3>;
+				};
+
+				ipu2_di1_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_3>;
+				};
+
+				ipu2_di1_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_3>;
+				};
+
+				ipu2_di1_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_3>;
+				};
+			};
+		};
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
+	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu2_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu2_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu2_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	compatible = "fsl,imx6q-hdmi";
+
+	port@2 {
+		reg = <2>;
+
+		hdmi_mux_2: endpoint {
+			remote-endpoint = <&ipu2_di0_hdmi>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+
+		hdmi_mux_3: endpoint {
+			remote-endpoint = <&ipu2_di1_hdmi>;
+		};
+	};
+};
+
+&ipu1_csi1 {
+	ipu1_csi1_from_mipi_vc1: endpoint {
+		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+	};
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		port@2 {
+			reg = <2>;
+
+			lvds0_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_lvds0>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			lvds0_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		port@2 {
+			reg = <2>;
+
+			lvds1_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_lvds1>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			lvds1_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_lvds1>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	port@1 {
+		reg = <1>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint {
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+	};
+
+	port@2 {
+		reg = <2>;
+
+		mipi_vc1_to_ipu1_csi1: endpoint {
+			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+
+		mipi_vc2_to_ipu2_csi0: endpoint {
+			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+
+		mipi_vc3_to_ipu2_csi1_mux: endpoint {
+			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mipi_dsi {
+	ports {
+		port@2 {
+			reg = <2>;
+
+			mipi_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_mipi>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			mipi_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_mipi>;
+			};
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
+			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
+&vpu {
+	compatible = "fsl,imx6q-vpu", "cnm,coda960";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
new file mode 100644
index 000000000..570143694
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2 boards
+ * parts common to all versions
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+	aliases {
+		eeprom0 = &i2c_eeprom0;
+		eeprom1 = &i2c_eeprom1;
+		eeprom2 = &i2c_eeprom2;
+		pmic0 = &i2c_pmic0;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	i2c_pmic0: pmic@58 {
+		compatible = "dlg,da9063";
+		/* the pmic uses addr 0x58 and 0x59 */
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <04 0x8>;
+
+		regulators {
+			bcore1 {
+				regulator-name = "bcore1";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bcore2 {
+				regulator-name = "bcore2";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bpro {
+				regulator-name = "bpro";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			bprob {
+				regulator-name = "bprob";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			bperi {
+				regulator-name = "bperi";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bmem {
+				regulator-name = "bmem";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5 {
+				regulator-name = "ldo5";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6 {
+				regulator-name = "ldo6";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo7 {
+				regulator-name = "ldo7";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo8 {
+				regulator-name = "ldo8";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo9 {
+				regulator-name = "ldo9";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo10 {
+				regulator-name = "ldo10";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo11 {
+				regulator-name = "ldo11";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bio {
+				regulator-name = "bio";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	expander: tca6416@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		env_reset {
+			gpio-hog;
+			input;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+		};
+		boot_rescue {
+			gpio-hog;
+			input;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c_eeprom2: eeprom@57{
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "st,m41t11";
+		reg = <0x68>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	i2c_eeprom0: eeprom@50{
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c_eeprom1: eeprom@57{
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&gpio2 {
+	tpm_pp {
+		gpio-hog;
+		output-low;
+		gpios = <17 GPIO_ACTIVE_HIGH>;
+	};
+	tpm_reset {
+		gpio-hog;
+		output-high;
+		gpios = <18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio6 {
+	spi_bus_ena {
+		gpio-hog;
+		output-high;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio7 {
+	bootsel0 {
+		gpio-hog;
+		input;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+	};
+	bootsel1 {
+		gpio-hog;
+		input;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+	};
+	bootsel2 {
+		gpio-hog;
+		input;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+	};
+
+	soft_reset {
+		gpio-hog;
+		output-high;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";   /* fixed configuration, ID pin not checked */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio>;
+
+	pinctrl_audmux: audmux {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x100b1 /* SS1# */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x400100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			/* make sure pin is GPIO and not ENET_REF_CLK */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1a0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+			/* backlight enable */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B	  0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x400130b0>;
+	};
+
+	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x400130b0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
new file mode 100644
index 000000000..3063f01d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &uart2;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_gpio {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-pre-reloc;
+};
+
+&backlight {
+	pwms = <&pwm1 0 300000>;
+	default-brightness-level = <2>;
+};
+
+/*
+ * allow switching write protect pin by gpio,
+ * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
+ */
+&gpio2 {
+	u-boot,dm-pre-reloc;
+
+	wp_spi_nor {
+		gpio-hog;
+		output-high;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio1 {
+	usdhc_fix {
+		gpio-hog;
+		output-high;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio5 {
+	u-boot,dm-pre-reloc;
+};
+
+&ecspi4 {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ecspi4 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi
new file mode 100644
index 000000000..88826a263
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &uart2;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_gpio {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&iomuxc {
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-pre-reloc;
+};
+
+&backlight {
+	pwms = <&pwm1 0 300000>;
+	default-brightness-level = <2>;
+};
+
+/*
+ * allow switching write protect / reset pin by gpio,
+ * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
+ */
+&gpio2 {
+	u-boot,dm-pre-reloc;
+
+	wp_spi_nor {
+		gpio-hog;
+		output-high;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reset_spi_nor {
+		gpio-hog;
+		output-high;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio4 {
+	u-boot,dm-pre-reloc;
+};
+
+&ecspi1 {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ecspi1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c.dtsi
new file mode 100644
index 000000000..70c0177d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c.dtsi
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c+2d boards
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+#include "imx6qdl-aristainetos2-common.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio>;
+
+		LED_blue {
+			label = "led_blue";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_green {
+			label = "led_green";
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_red {
+			label = "led_red";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_yellow {
+			label = "led_yellow";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_ena {
+			label = "led_ena";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
+		    &gpio4 10 GPIO_ACTIVE_HIGH
+		    &gpio4 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+	pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi4 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+};
+
+&i2c1 {
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+};
+
+&gpio7 {
+	eMMC_reset {
+		gpio-hog;
+		output-high;
+		gpios = <8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+			/* SS0# */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
+			/* SS1# */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
+			/* SS2# */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
+			/* WP pin NOR Flash */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
+			/* Flash nReset */
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28  0x4001b0b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			/* led enable */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0
+			/* LCD power enable */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x4001b0b0
+			/* led yellow */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x4001b0b0
+			/* led red */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x4001b0b0
+			/* led green */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x4001b0b0
+			/* led blue */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x4001b0b0
+			/* Profibus IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			/* FPGA IRQ currently unused*/
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
+			/* Display reset because of clock failure */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b0
+			/* spi bus #2 SS driver enable */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
+			/* RST_LOC# PHY reset input (has pull-down!)*/
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x4001b0b0
+			/* Touchscreen IRQ */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x4001b0b0
+			/* make sure pin is GPIO and not ENET_REF_CLK */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x4001a0b0
+			/* TPM PP */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x4001b0b0
+			/* TPM Reset */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x4001b0b0
+			/* eMMC Reset# */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x4001b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
+			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID  0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC    0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			/* SD1 card detect input */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
+			/* SD1 write protect input */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb-u-boot.dtsi
new file mode 100644
index 000000000..8c2ed7007
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb-u-boot.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &uart1;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_gpio {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&iomuxc {
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-pre-reloc;
+};
+
+&backlight {
+	pwms = <&pwm1 0 300000>;
+	default-brightness-level = <2>;
+};
+
+/*
+ * allow switching write protect / reset pin by gpio,
+ * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
+ */
+&gpio2 {
+	u-boot,dm-pre-reloc;
+
+	wp_spi_nor {
+		gpio-hog;
+		output-high;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reset_spi_nor {
+		gpio-hog;
+		output-high;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio4 {
+	u-boot,dm-pre-reloc;
+};
+
+&ecspi1 {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ecspi1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi
new file mode 100644
index 000000000..c3724ec86
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c-cslb board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+#include "imx6qdl-aristainetos2-common.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio>;
+
+		LED_blue {
+			label = "led_blue";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_green {
+			label = "led_green";
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_red {
+			label = "led_red";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_yellow {
+			label = "led_yellow";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_blue_2 {
+			label = "led_blue2";
+			gpios = <&expander 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		LED_green_2 {
+			label = "led_green2";
+			gpios = <&expander 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		LED_red_2 {
+			label = "led_red2";
+			gpios = <&expander 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		LED_yellow_2 {
+			label = "led_yellow2";
+			gpios = <&expander 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		LED_ena {
+			label = "led_ena";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
+		    &gpio4 10 GPIO_ACTIVE_HIGH
+		    &gpio4 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+	pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi4 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+};
+
+&i2c1 {
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+};
+
+&gpio7 {
+	eMMC_reset {
+		gpio-hog;
+		output-high;
+		gpios = <8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+			/* SS0# */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
+			/* SS1# */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
+			/* SS2# */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
+			/* WP pin NOR Flash */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
+			/* Flash nReset */
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28  0x4001b0b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			/* led enable */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0
+			/* LCD power enable */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x4001b0b0
+			/* led yellow */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x4001b0b0
+			/* led red */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x4001b0b0
+			/* led green */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x4001b0b0
+			/* led blue */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x4001b0b0
+			/* Profibus IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			/* FPGA IRQ currently unused*/
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
+			/* Display reset because of clock failure */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b0
+			/* spi bus #2 SS driver enable */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
+			/* RST_LOC# PHY reset input (has pull-down!)*/
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x4001b0b0
+			/* Touchscreen IRQ */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x4001b0b0
+			/* make sure pin is GPIO and not ENET_REF_CLK */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x4001a0b0
+			/* TPM PP */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x4001b0b0
+			/* TPM Reset */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x4001b0b0
+			/* eMMC Reset# */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x4001b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID  0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC    0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			/* SD1 card detect input */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-cubox-i.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-cubox-i.dtsi
new file mode 100644
index 000000000..e3be453d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-cubox-i.dtsi
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 9 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_ir>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
+
+		front {
+			active-low;
+			label = "imx6:red:front";
+			max-brightness = <248>;
+			pwms = <&pwm1 0 50000>;
+		};
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "Integrated SPDIF";
+		/* IMX6 doesn't implement this yet */
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+		pinctrl-names = "default";
+
+		button_0 {
+			label = "Button 0";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
+
+	status = "okay";
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	cubox_i {
+		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_cubox_i_ir: cubox-i-ir {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+			>;
+		};
+
+		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
+			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
+		};
+
+		pinctrl_cubox_i_spdif: cubox-i-spdif {
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+		};
+
+		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+		};
+
+		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
+		};
+
+		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
+			/*
+			 * The Cubox-i pulls ID low, but as it's pointless
+			 * leaving it as a pull-up, even if it is just 10uA.
+			 */
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+			>;
+		};
+
+		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
+		};
+
+		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+			>;
+		};
+
+		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+
+		pinctrl_gpio_key: gpio-key {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
+	vmmc-supply = <&vcc_3v3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_5v0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
new file mode 100644
index 000000000..32128d4d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2020 Harald Seiler <hws@denx.de>
+ */
+
+#include "imx6qdl-dhcom-u-boot.dtsi"
+
+/ {
+	fec_vio: regulator-fec {
+		compatible = "regulator-fixed";
+
+		regulator-name = "fec-vio";
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&fec {
+	phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <10>;
+
+	phy-supply = <&fec_vio>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
new file mode 100644
index 000000000..af4719aae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2015-2019 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx6qdl-dhcom.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_ext>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
+
+	pinctrl_hog: hog-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x400120b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x400120b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x400120b0
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x120b0
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x400120b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x120b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x120b0
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x400120b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x400120b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x400120b0
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x400120b0
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x400120b0
+			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x400120b0
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16		0x400120b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x400120b0
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x400120b0
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x400120b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x400120b0
+		>;
+	};
+
+	pinctrl_audmux_ext: audmux-ext-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_enet_1G: enet-1G-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x000b0
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x000b1
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_pcie: pcie-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
new file mode 100644
index 000000000..4c3b5e82d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2020 Harald Seiler <hws@denx.de>
+ */
+
+&reg_usb_otg_vbus {
+	gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-dhcom.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-dhcom.dtsi
new file mode 100644
index 000000000..1141b6a56
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-dhcom.dtsi
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2015-2019 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		mmc3 = &usdhc1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_3p3v: regulator-3P3V {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {	/* S25FL116K */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		m25p,fast-read;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_100M>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {	/* SMSC LAN8710Ai */
+			reg = <0>;
+			max-speed = <100>;
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			reset-delay-us = <1000>;
+			reset-post-delay-us = <1000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic_hw300>;
+		reg = <0x3c>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <787500>;
+				regulator-max-microvolt = <1527272>;
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-suspend-mem-microvolt = <1040000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1885714>;
+				regulator-max-microvolt = <3657142>;
+				lltc,fb-voltage-divider = <100000 28000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <787500>;
+				regulator-max-microvolt = <1527272>;
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-suspend-mem-microvolt = <980000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <855571>;
+				regulator-max-microvolt = <1659291>;
+				lltc,fb-voltage-divider = <100000 93100>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <3240306>;
+				regulator-max-microvolt = <3240306>;
+				lltc,fb-voltage-divider = <102000 29400>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <2484708>;
+				regulator-max-microvolt = <2484708>;
+				lltc,fb-voltage-divider = <100000 41200>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	touchscreen@49 {	/* TSC2004 */
+		compatible = "ti,tsc2004";
+		reg = <0x49>;
+		vio-supply = <&reg_3p3v>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2004_hw300>;
+		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc@56 {
+		compatible = "rv3029c2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_hw300>;
+		reg = <0x56>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_base>;
+
+	pinctrl_hog_base: hog-base-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_100M: enet-100M-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x000b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x000b1
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x120b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pmic_hw300: pmic-hw300-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1B0B0
+		>;
+	};
+
+	pinctrl_rtc_hw300: rtc-hw300-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120B0
+		>;
+	};
+
+	pinctrl_tsc2004_hw300: tsc2004-hw300-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120B0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x4001b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120B0
+		>;
+	};
+
+	pinctrl_usbotg: usbotg-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120B0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120B0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1_reg>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	keep-power-in-suspend;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw51xx.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw51xx.dtsi
new file mode 100644
index 000000000..7e2846308
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw51xx.dtsi
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw52xx.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw52xx.dtsi
new file mode 100644
index 000000000..f1d9ba1fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw52xx.dtsi
@@ -0,0 +1,784 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		mmc0 = &usdhc3;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0 /* AUD4_MCK */
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE_RST# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw53xx.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw53xx.dtsi
new file mode 100644
index 000000000..172a45ba1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw53xx.dtsi
@@ -0,0 +1,775 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		mmc0 = &usdhc3;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 2>;
+		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw54xx.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw54xx.dtsi
new file mode 100644
index 000000000..e09fad606
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw54xx.dtsi
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		mmc0 = &usdhc3;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound-analog {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+		};
+
+		fan-controller@2c {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2c>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default", "state_dio";
+	pinctrl-0 = <&pinctrl_pwm4_backlight>;
+	pinctrl-1 = <&pinctrl_pwm4_dio>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			MX6QDL_PAD_EIM_D25__AUD5_RXC            0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
+			MX6QDL_PAD_EIM_D24__AUD5_RXFS           0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4_backlight: pwm4grpbacklight {
+		fsl,pins = <
+			/* LVDS_PWM J6.5 */
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4_dio: pwm4grpdio {
+		fsl,pins = <
+			/* DIO3 J16.4 */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw551x.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw551x.dtsi
new file mode 100644
index 000000000..1bb586cbd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw551x.dtsi
@@ -0,0 +1,698 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-digital {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_3P3 (1+R1/R2 = 1.281) */
+			reg_3p3: sw4 {
+				regulator-name = "vdd3p3";
+				regulator-min-microvolt = <1880000>;
+				regulator-max-microvolt = <3647000>;
+				lltc,fb-voltage-divider = <200000 56200>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
+			reg_1p8a: ldo2 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1816125>;
+				regulator-max-microvolt = <1816125>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8b: HDMI In analog */
+			reg_1p8b: ldo3 {
+				regulator-name = "vdd1p8b";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio_exp: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi_receiver: hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3>;
+		AVDD-supply = <&reg_1p8b>;
+		DVDD-supply = <&reg_1p8a>;
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same cycle
+		 * which we map to VP[15:08]<->CSI_DATA[19:12]
+		 */
+		nxp,vidout-portcfg =
+			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+	bus-width = <16>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT14__AUD5_RXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS	0x130b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1_csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_tda1997x: tda1997xgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw552x.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw552x.dtsi
new file mode 100644
index 000000000..7935b10ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw552x.dtsi
@@ -0,0 +1,521 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay"; };
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw553x.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw553x.dtsi
new file mode 100644
index 000000000..b6965f25d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw553x.dtsi
@@ -0,0 +1,738 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_3P3 (1+R1/R2 = 1.281) */
+			reg_3p3v: sw4 {
+				regulator-name = "vdd3p3";
+				regulator-min-microvolt = <1880000>;
+				regulator-max-microvolt = <3647000>;
+				lltc,fb-voltage-divider = <200000 56200>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
+			reg_1p8a: ldo2 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1816125>;
+				regulator-max-microvolt = <1816125>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8b: microSD VDD_1P8 */
+			reg_1p8b: ldo3 {
+				regulator-name = "vdd1p8b";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw560x.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw560x.dtsi
new file mode 100644
index 000000000..bfe65fd3c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw560x.dtsi
@@ -0,0 +1,939 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	backlight-keypad {
+		compatible = "gpio-backlight";
+		gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1p4v: regulator-vddsoc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_soc";
+		regulator-min-microvolt = <1400000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an2";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	ds1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x34>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
+			         MATRIX_KEY(0x00, 0x00, BTN_1)
+			         MATRIX_KEY(0x01, 0x01, BTN_2)
+			         MATRIX_KEY(0x01, 0x00, BTN_3)
+			         MATRIX_KEY(0x02, 0x00, BTN_4)
+			         MATRIX_KEY(0x00, 0x03, BTN_5)
+			         MATRIX_KEY(0x00, 0x02, BTN_6)
+			         MATRIX_KEY(0x01, 0x03, BTN_7)
+			         MATRIX_KEY(0x01, 0x02, BTN_8)
+			         MATRIX_KEY(0x02, 0x02, BTN_9)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.931) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <796551>;
+				regulator-max-microvolt = <1544827>;
+				lltc,fb-voltage-divider = <243000 261000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw4 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1050000>;
+				lltc,fb-voltage-divider = <78700 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* AUD4 */
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			/* AUD6 */
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_flexcan: flexcangrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x4001b0b0 /* DIOI2C_DIS# */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x0001b0b0 /* LVDS_TOUCH_IRQ# */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x0001b0b0 /* LVDS_BACKEN */
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b0
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x0001b0b0 /* KEYPAD_IRQ# */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x0001b0b0 /* KEYPAD_LED_EN */
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b0    /* PCI_RST# */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x170f9
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x170f9
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x170f9
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw5903.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw5903.dtsi
new file mode 100644
index 000000000..6ebf6aef2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw5903.dtsi
@@ -0,0 +1,799 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_12p0: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320";
+		model = "imx-tlv320";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic3105>;
+		/* routing of sink, source */
+		audio-routing =
+			/* TLV320 LINE1L pin <-> Mic Jack connector */
+			"LINE1L", "Mic Jack",
+			/* board Headphone Jack <-> HPOUT */
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	dts1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
+			reg_1p8v: sw1 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw4 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_soc>;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.38): */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <1002777>;
+				regulator-max-microvolt = <1002777>;
+				lltc,fb-voltage-divider = <100000 261000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	tlv320aic3105: codec@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
+		/* Regulators */
+		DRVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_1p8v>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8451";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "INT2";
+	};
+
+	/* headphone detect */
+	ts3a227e@3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		ti,micbias = <4>; /* 2.5V micbias */
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: g101evn010 {
+				clock-frequency = <68930000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	max-frequency = <100000000>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* MCK */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0 /* PHY_EN */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			/* I2C3 */
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+
+			/* Headphone Detect */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x0001b0b0 /* HPDET_IRQ# */
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x0001b0b0 /* HPDET_MIC# */
+
+			/* Codec */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x0001b0b0 /* CODEC_RST# */
+
+			/* Touch Controller */
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x0001b0b0 /* TOUCH_IRQ# */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x0001b0b0 /* TOUCH_RST */
+
+			/* Stow Sensor */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x0001b0b0 /* ACCEL_IRQ2 */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b0b0 /* ACCEL_IRQ1 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* TXEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x4001b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x4001b0b0 /* EMMY_EN */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x4001b0b0 /* EMMY_CFG1# */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05		0x4001b0b0 /* EMMY_CFG2# */
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x0001b0b0 /* EMMY_BTWAKE# */
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x0001b0b0 /* EMMY_WFWAKE# */
+
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x17059 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170b9 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170f9 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw5904.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw5904.dtsi
new file mode 100644
index 000000000..9adbd728d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw5904.dtsi
@@ -0,0 +1,817 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		mmc0 = &usdhc3;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan1";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&fec>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	dts1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B      0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B      0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw5907.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw5907.dtsi
new file mode 100644
index 000000000..58f73a141
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw5907.dtsi
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw5910.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw5910.dtsi
new file mode 100644
index 000000000..446c1043a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw5910.dtsi
@@ -0,0 +1,671 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		mmc0 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_wl: regulator-wl {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_3p0";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p5";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* serial console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* cc1352 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Sterling-LWB Bluetooth */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* GPS */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* Sterling-LWB SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_wl>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x4001b0b1 /* DIO20 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x4001b0b1 /* DIO14 */
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x4001b0b1 /* DIO15 */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1 /* TMS */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1 /* TCK */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1 /* TDO */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1 /* TDI */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x4001b0b1 /* RST# */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw5912.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw5912.dtsi
new file mode 100644
index 000000000..88234a6f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw5912.dtsi
@@ -0,0 +1,613 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		mmc0 = &usdhc3;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0a>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-gw5913.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-gw5913.dtsi
new file mode 100644
index 000000000..f4c2b2189
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-gw5913.dtsi
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <100>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_arm";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_soc";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p5";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p0";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_3p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard.dtsi
new file mode 100644
index 000000000..2ffb21dd8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard.dtsi
@@ -0,0 +1,368 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Headphone Jack",
+			"Headphone Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		/* IMX6 doesn't implement this yet */
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
+	status = "okay";
+
+	/* Pro baseboard model */
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	/* Pro baseboard model */
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	hummingboard {
+		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
+				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
+			>;
+		};
+
+		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard_pwm1: pwm1grp {
+			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+		};
+
+		pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard_spdif: hummingboard-spdif {
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+		};
+
+		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
+			/*
+			 * We want it pulled down for a fixed host connection.
+			 */
+			fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
+		};
+
+		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+			>;
+		};
+
+		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+		pinctrl_hummingboard_vmmc: hummingboard-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
+	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	 pinctrl-names = "default";
+	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+	 status = "okay";
+};
+
+&pwm2 {
+	 pinctrl-names = "default";
+	 status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_hummingboard_usdhc2_aux
+		&pinctrl_hummingboard_usdhc2
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
new file mode 100644
index 000000000..400b885e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "imx6qdl-u-boot.dtsi"
+
+/ {
+	board-detect {
+		compatible = "solidrun,hummingboard-detect";
+		detect-gpios = <
+			&gpio2 8 0
+			&gpio3 4 0
+			&gpio4 9 0
+			&gpio6 0 0
+			&gpio6 4 0
+		>;
+	};
+};
+
+&gpio2 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio4 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio6 {
+	u-boot,dm-pre-reloc;
+};
+
+&usdhc1 {
+	status = "disabled";
+};
+
+&usdhc2 {
+	u-boot,dm-pre-reloc;
+};
+
+&usdhc3 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2-emmc.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2-emmc.dtsi
new file mode 100644
index 000000000..f40040538
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2-emmc.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	hummingboard2 {
+		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>;
+	vmmc-supply = <&v_3v2>;
+	vqmmc-supply = <&v_3v2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2.dtsi
new file mode 100644
index 000000000..e4231331f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-hummingboard2.dtsi
@@ -0,0 +1,577 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
+		linux,rc-map-name = "rc-rc6-mce";
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	vcc_1p8: regulator-vcc-1p8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vcc_1p8";
+		vin-supply = <&v_3v2>;
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		/* USB hub port 1 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb3: regulator-v-usb3 {
+		/* USB hub port 3 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb4: regulator-v-usb4 {
+		/* USB hub port 4 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb4";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
+	cs-gpios = <&gpio2 26 0>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
+	status = "okay";
+
+	pcf8523: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDD-supply = <&vcc_1p8>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hummingboard2 {
+		pinctrl_hog: hoggrp {
+		fsl,pins = <
+				/*
+				 * 36 pin headers GPIO description. The pins
+				 * numbering as following -
+				 *
+				 * 	3.2v	5v	74	75
+				 *	73	72	71	70
+				 *	69	68	67	66
+				 *
+				 *	77	78	79	76
+				 *	65	64	61	60
+				 *	53	52	51	50
+				 *	49	48	166	132
+				 *	95	94	90	91
+				 *	GND	54	24	204
+				 *
+				 * The GPIO numbers can be extracted using
+				 * signal name from below.
+				 * Example -
+				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
+				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
+				 *
+				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
+				 * number is : gpio number = (X-1) * 32 + Y
+				 */
+				/* DI1_PIN15 */
+				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
+				/* DI1_PIN02 */
+				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
+				/* DISP1_DATA00 */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
+				/* DISP1_DATA01 */
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
+				/* DISP1_DATA02 */
+				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
+				/* DISP1_DATA03 */
+				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
+				/* DISP1_DATA04 */
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
+				/* DISP1_DATA05 */
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
+				/* DISP1_DATA06 */
+				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
+				/* DISP1_DATA07 */
+				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
+				/* DI1_D0_CS */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
+				/* DI1_D1_CS */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
+				/* DI1_PIN01 */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
+				/* DI1_PIN03 */
+				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
+				/* DISP1_DATA08 */
+				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
+				/* DISP1_DATA09 */
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
+				/* DISP1_DATA10 */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
+				/* DISP1_DATA11 */
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
+				/* DISP1_DATA12 */
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
+				/* DISP1_DATA13 */
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
+				/* DISP1_DATA14 */
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
+				/* DISP1_DATA15 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
+				/* DISP1_DATA16 */
+				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
+				/* DISP1_DATA17 */
+				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
+				/* DISP1_DATA18 */
+				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
+				/* DISP1_DATA19 */
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
+				/* DISP1_DATA20 */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
+				/* DISP1_DATA21 */
+				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
+				/* DISP1_DATA22 */
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
+				/* DISP1_DATA23 */
+				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
+				/* DI1_DISP_CLK */
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
+				/* SPDIF_IN */
+				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
+				/* SPDIF_OUT */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
+
+				/* MikroBUS GPIO pin number 10 */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
+			>;
+		};
+
+		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
+			>;
+		};
+
+		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
+			>;
+		};
+
+		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_mipi: hummingboard2_mipi {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
+			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
+			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
+			/*
+			 * We want it pulled down for a fixed host connection.
+			 */
+			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+		};
+
+		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
+			>;
+		};
+
+		pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
+
+		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
+	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2
+	>;
+	pinctrl-1 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_100mhz
+	>;
+	pinctrl-2 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_200mhz
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-icore-1.5.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-icore-1.5.dtsi
new file mode 100644
index 000000000..0fd7f2e24
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-icore-1.5.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ */
+
+#include "imx6qdl-icore.dtsi"
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi
new file mode 100644
index 000000000..158cadced
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&usdhc4 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc4 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-icore-rqs.dtsi
new file mode 100644
index 000000000..a4217f564
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ * Copyright (C) 2015 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD3_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	reg_sd4_vmmc: regulator-sd4-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD4_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhub>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
+		clock-names = "refclk";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack",
+			"Speaker", "Line Out Jack",
+			"Speaker", "Ext Spk";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_aud4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0x0>;
+			rxc-skew-ps = <1140>;
+			txc-skew-ps = <1140>;
+			txen-skew-ps = <600>;
+			rxdv-skew-ps = <240>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <600>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <240>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <240>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	clocks = <&clks IMX6QDL_CLK_USBOH3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmcc-supply = <&reg_sd3_vmmc>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	vmcc-supply = <&reg_sd4_vmmc>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059	/* PCIe Reset */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06  0x1f059	/* HUB USB Reset */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1f059	/* CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1f059	/* PWR */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-icore-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-icore-u-boot.dtsi
new file mode 100644
index 000000000..f95d49d00
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-icore-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-icore.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-icore.dtsi
new file mode 100644
index 000000000..7814f1ef0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-icore.dtsi
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 100000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rmii_clk: clock-rmii-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;  /* 25MHz for example */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack",
+			"Speaker", "Line Out Jack",
+			"Speaker", "Ext Spk";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_aud4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_3p3v>;
+		powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&mipi_csi {
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	  0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-mba6.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-mba6.dtsi
new file mode 100644
index 000000000..874b68564
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-mba6.dtsi
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+/ {
+	aliases {
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		linux,stdout-path = &uart2;
+		stdout-path = &uart2;
+	};
+
+	regulators {
+		reg_mba6_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "supply-mba6-3p3v";
+			reg = <1>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_otgvbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_otgpwr>;
+			regulator-name = "otg-vbus-supply";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin_supply = <&reg_3p3v>;
+		};
+	};
+};
+
+&fec {
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <100>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			force-master;
+			max-speed = <1000>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	mba6 {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				/* FEC phy IRQ */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x00011008
+				/* FEC phy reset */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25   0x1b099
+				/* DSE = 100, 100k up, SPEED = MED */
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0xb0a0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC         0xb0a0
+				/* DSE = 111, pull 100k up */
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0xb038
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0xb038
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0xb038
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0xb038
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0xb038
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+				/* DSE = 111, pull external */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x0038
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x0038
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x0038
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x0038
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x0038
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+				/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0f0
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b099 /* LCD.PWR_EN */
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0001b099 /* LCD.RESET */
+				/* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
+				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+			>;
+		};
+
+		pinctrl_reg_otgpwr: regotgpwrgrp {
+			fsl,pins = <
+				/* OTG_PWR */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b099
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00017071
+				/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x0001b099 /* usdhc2 CD */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02  0x0001b099 /* usdhc2 WP */
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID  0x00017059
+			>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_otgvbus>;
+	status = "okay";
+};
+
+&usdhc2 { /* Baseboard Slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_mba6_3p3v>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-mba6a.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-mba6a.dtsi
new file mode 100644
index 000000000..d8b4d00d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-mba6a.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	sensor1: lm75@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	eeprom1: m24c64@57 {
+		compatible = "st,24c64", "at24";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc1: ds1339@68 {
+		compatible = "ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	mba6 {
+		pinctrl_enet_fix: enetfixgrp {
+			fsl,pins = <
+				/* ENET ping patch */
+				MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+			>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-mba6b.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-mba6b.dtsi
new file mode 100644
index 000000000..7489b48d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-mba6b.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	sensor1: lm75@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	eeprom1: m24c64@57 {
+		compatible = "st,24c64", "at24";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc1: ds1339@68 {
+		compatible = "ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	mba6 {
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+			>;
+		};
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-nitrogen6x.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 000000000..5094929b6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx6qdl-sabrelite.dtsi"
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+#undef GP_ENET_PHY_RESET
+#define GP_ENET_PHY_RESET	<&gpio1 27 GPIO_ACTIVE_LOW>
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x030b0
+#define GPIRQ_ENET_PHY		<&gpio1 28 IRQ_TYPE_LEVEL_LOW>
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Spare */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+};
+
+&fec {
+#if 0
+	phy-reset-gpios = GP_ENET_PHY_RESET;
+#endif
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc3 {
+	/delete-property/ wp-gpios;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-phytec-mira.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-phytec-mira.dtsi
new file mode 100644
index 000000000..9ebd438dc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-phytec-mira.dtsi
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+
+/ {
+	aliases {
+		rtc0 = &i2c_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		status = "okay";
+	};
+
+	gpio_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+		status = "disabled";
+
+		red {
+			label = "phyboard-mira:red";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "phyboard-mira:green";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "phyboard-mira:blue";
+			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_en_switch: regulator-en-switch {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_en_switch>;
+		regulator-name = "Enable Switch";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	reg_flexcan1: regulator-flexcan1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_en>;
+		regulator-name = "flexcan1-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "mPCIe_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: usbotg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel {
+		compatible = "auo,g104sn02";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_en>;
+		power-supply = <&reg_panel>;
+		enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_flexcan1>;
+	status = "disabled";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "disabled";
+
+	stmpe: touchctrl@44 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		reg = <0x44>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_NONE>;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		reg = <0x68>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "disabled";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "disabled";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_panel_en: panelen1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+		>;
+	};
+
+	pinctrl_en_switch: enswitchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0xb0b1
+		>;
+	};
+
+	pinctrl_gpioleds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24	0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0xb0b1
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0xb0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0xb0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0xb0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1  /* CD */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
new file mode 100644
index 000000000..77d871340
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
+
+/ {
+	aliases {
+		rtc1 = &da9062_rtc;
+		rtc2 = &snvs_rtc;
+	};
+
+	/*
+	 * Set the minimum memory size here and
+	 * let the bootloader set the real size.
+	 */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x8000000>;
+	};
+
+	gpio_leds_som: somleds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds_som>;
+
+		som-led-green {
+			label = "phycore:green";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		status = "disabled";
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vdd_eth_io>;
+	phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			reg = <3>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		compatible = "dlg,da9062";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		da9062_rtc: rtc {
+			compatible = "dlg,da9062-rtc";
+		};
+
+		da9062_onkey: onkey {
+			compatible = "dlg,da9062-onkey";
+		};
+
+		watchdog {
+			compatible = "dlg,da9062-watchdog";
+		};
+
+		regulators {
+			vdd_arm: buck1 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_soc: buck2 {
+				regulator-name = "vdd_soc";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_1p5: buck3 {
+				regulator-name = "vdd_ddr3";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_eth_1p2: buck4 {
+				regulator-name = "vdd_eth";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_snvs: ldo1 {
+				regulator-name = "vdd_snvs";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_high: ldo2 {
+				regulator-name = "vdd_high";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io: ldo3 {
+				regulator-name = "vdd_eth_io";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vdd_emmc_1p8: ldo4 {
+				regulator-name = "vdd_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&reg_arm {
+	vin-supply = <&vdd_arm>;
+};
+
+&reg_pu {
+	vin-supply = <&vdd_soc>;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_soc>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS2__NAND_CE2_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS3__NAND_CE3_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-pico.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-pico.dtsi
new file mode 100644
index 000000000..50379d04b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-pico.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		usb0 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_reset>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {  /* Bluetooth module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi/BT  */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x4001b0b5 /* PICO_P24 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x4001b0b5 /* PICO_P25 */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x4001b0b5 /* PICO_P26 */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x4001b0b5 /* PICO_P28 */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x4001b0b5 /* PICO_P30 */
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x4001b0b5 /* PICO_P32 */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x4001b0b5 /* PICO_P34 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x4001b0b5 /* PICO_P42 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x4001b0b5 /* PICO_P44 */
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x4001b0b5 /* PICO_P48 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000f0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x000f0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1f0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie_reset: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x130b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x17071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
new file mode 100644
index 000000000..ea90f40a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+	};
+};
+
+&usdhc3 {
+	no-1-8-v;
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sabreauto.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sabreauto.dtsi
new file mode 100644
index 000000000..28a7fdb0f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sabreauto.dtsi
@@ -0,0 +1,810 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_audio: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "cs42888_supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx-sabreauto-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		mux-gpios = <&gpio5 4 0>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adv7180: camera@21 {
+				compatible = "adi,adv7180";
+				reg = <0x21>;
+				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+				port {
+					adv7180_to_ipu1_csi0_mux: endpoint {
+						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+						bus-width = <8>;
+					};
+				};
+			};
+
+			max7310_a: gpio@30 {
+				compatible = "maxim,max7310";
+				reg = <0x30>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			max7310_b: gpio@32 {
+				compatible = "maxim,max7310";
+				reg = <0x32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			};
+
+			max7310_c: gpio@34 {
+				compatible = "maxim,max7310";
+				reg = <0x34>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer@e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer@1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	status = "disabled"; /* pin conflict with WEIM NOR */
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabreauto {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+
+		pinctrl_egalax_int: egalax-intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
+			>;
+		};
+
+		pinctrl_max7310: max7310grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm3: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_gpt_input_capture0: gptinputcapture0grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpt_input_capture1: gptinputcapture1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_weim_cs0: weimcs0grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+			>;
+		};
+
+		pinctrl_weim_nor: weimnorgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "disabled"; /* pin conflict with SPI NOR */
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sabrelite.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sabrelite.dtsi
new file mode 100644
index 000000000..673a19c3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x000b1
+#define GP_ECSPI1_NOR_CS	<&gpio3 19 GPIO_ACTIVE_LOW>
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x0b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+#undef GP_ENET_PHY_RESET
+#define GP_ENET_PHY_RESET	<&gpio3 23 GPIO_ACTIVE_LOW>
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x030b0
+#define GPIRQ_ENET_PHY		<&gpio1 28 IRQ_TYPE_LEVEL_LOW>
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Spare */
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_1: i2c1-1grp {
+		fsl,pins = <
+#define GP_I2C1_SCL	<&gpio3 21 GPIO_ACTIVE_HIGH>
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+#define GP_I2C1_SDA	<&gpio3 28 GPIO_ACTIVE_HIGH>
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_1: i2c2-1grp {
+		fsl,pins = <
+#define GP_I2C2_SCL	<&gpio4 12 GPIO_ACTIVE_HIGH>
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+#define GP_I2C2_SDA	<&gpio4 13 GPIO_ACTIVE_HIGH>
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+#define GPIRQ_I2C3_J7	<&gpio1 9 IRQ_TYPE_EDGE_FALLING>
+#define GP_I2C3_J7	<&gpio1 9 GPIO_ACTIVE_LOW>
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_1: i2c3-1grp {
+		fsl,pins = <
+#define GP_I2C3_SCL	<&gpio1 5 GPIO_ACTIVE_HIGH>
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x4001b8b1
+#define GP_I2C3_SDA	<&gpio7 11 GPIO_ACTIVE_HIGH>
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp {
+		fsl,pins = <
+#define GP_REG_USBOTG	<&gpio3 22 GPIO_ACTIVE_HIGH>
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x030b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+#define GP_USBH1_HUB_RESET	<&gpio7 12 GPIO_ACTIVE_LOW>
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+#define GP_USDHC3_CD	<&gpio7 0 GPIO_ACTIVE_LOW>
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+#define GP_USDHC3_WP	<&gpio7 1 GPIO_ACTIVE_HIGH>
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+#define GP_USDHC4_CD	<&gpio2 6 GPIO_ACTIVE_LOW>
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0
+		>;
+	};
+};
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+		pwm_lcd = &pwm1;
+		pwm_lvds = &pwm4;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = GP_REG_USBOTG;
+		enable-active-high;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = GP_ECSPI1_NOR_CS;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		mtd@00000000 {
+			label = "U-Boot";
+			reg = <0x0 0xC0000>;
+		};
+
+		mtd@000C0000 {
+			label = "env";
+			reg = <0xC0000 0x2000>;
+		};
+		mtd@000C2000 {
+			label = "splash";
+			reg = <0xC2000 0x13e000>;
+		};
+	};
+};
+
+&fec {
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+#if 0
+	phy-reset-gpios = GP_ENET_PHY_RESET;
+#endif
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	rxdv-skew-ps = <0>;
+	status = "okay";
+	txc-skew-ps = <3000>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+
+	mdio {
+		#address-cells = <0>;
+		#size-cells = <1>;
+
+		ethphy: ethernet-phy {
+			interrupts-extended = GPIRQ_ENET_PHY;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_1>;
+	scl-gpios = GP_I2C1_SCL;
+	sda-gpios = GP_I2C1_SDA;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_1>;
+	scl-gpios = GP_I2C2_SCL;
+	sda-gpios = GP_I2C2_SDA;
+	status = "okay";
+
+	hdmi_edid: edid@50 {
+		compatible = "fsl,imx6-hdmi-i2c";
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_1>;
+	scl-gpios = GP_I2C3_SCL;
+	sda-gpios = GP_I2C3_SDA;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	disable-over-current;
+	reset-gpios = GP_USBH1_HUB_RESET;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = GP_USDHC3_CD;
+	wp-gpios = GP_USDHC3_WP;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = GP_USDHC4_CD;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
new file mode 100644
index 000000000..45f02b19c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sabresd.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sabresd.dtsi
new file mode 100644
index 000000000..eddb39017
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 29 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_audio: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply";
+			gpio = <&gpio4 10 0>;
+			enable-active-high;
+		};
+
+		reg_pcie: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pcie_reg>;
+			regulator-name = "MPCIE_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 19 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabresd-wm8962",
+			   "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		red {
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0013 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x8014 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	ov5642: camera@3c {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		reg = <0x3c>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 2>;
+		wakeup-gpios = <&gpio6 7 0>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabresd {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+			>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_arm {
+       vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+       vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-brcm.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-brcm.dtsi
new file mode 100644
index 000000000..b55af61df
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-brcm.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	clk_brcm: brcm-clock {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_brcm: brcm-reg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 19 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+			      <&gpio6 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_brcm>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-emmc.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-emmc.dtsi
new file mode 100644
index 000000000..5f3b8baab
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-emmc.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_usdhc3: microsom-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+/* USDHC3 - eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-ti.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-ti.dtsi
new file mode 100644
index 000000000..44a97ba93
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sr-som-ti.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	nvcc_sd1: regulator-nvcc-sd1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "nvcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	clk_ti_wifi: ti-wifi-clock {
+		/* This is a hack around the kernel - using "fixed clock"
+		 * results in the "pinctrl" properties being ignored, and
+		 * the clock not being output.  Instead, use a gated clock
+		 * and the unrouted WL_XTAL_PU gpio.
+		 */
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_clk>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	pwrseq_ti_wifi: ti-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_ti_bt: microsom-ti-bt {
+			fsl,pins = <
+				/* BT_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_clk: microsom-ti-clk {
+			fsl,pins = <
+				/* EXT_32K */
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				/* WL_XTAL_PU (unrouted) */
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
+			fsl,pins = <
+				/* WLAN_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
+			fsl,pins = <
+				/* WLAN_IRQ */
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional TI Wi-Fi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_bt>;
+	};
+};
+
+/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&pwrseq_ti_wifi>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-sr-som.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-sr-som.dtsi
new file mode 100644
index 000000000..b06577808
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-sr-som.dtsi
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-handle = <&phy>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <2>;
+	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				/* AR8035 reset */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
+				/* AR8035 interrupt */
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+				/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+				/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+				/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+
+				/*
+				 * As the RMII pins are also connected to RGMII
+				 * so that an AR8030 can be placed, set these
+				 * to high-z with the same pulls as above.
+				 * Use the GPIO settings to avoid changing the
+				 * input select registers.
+				 */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
+			>;
+		};
+
+		pinctrl_microsom_uart1: microsom-uart1 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart1>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-tqma6.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-tqma6.dtsi
new file mode 100644
index 000000000..85eb3d8da
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-tqma6.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		/delete-property/ mmc1;
+		/delete-property/ mmc2;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "supply-3p3v";
+			reg = <0>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		status = "okay";
+		compatible = "micron,n25q128a13", "n25q128a13";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+	};
+};
+
+&iomuxc {
+	tqma6 {
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
+				 /* eCSPI1 SS1 */
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
+			>;
+		};
+
+		pinctrl_i2c1_tqma6: i2c1-tqma6grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+			>;
+		};
+
+		pinctrl_i2c3_tqma6: i2c3-tqma6grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			>;
+		};
+	};
+};
+
+&pmic {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 8>;
+
+		regulators {
+			reg_vddcore: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_vddsoc: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_gen_3v3: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5a: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5b: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_5v_600mA: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-always-on;
+			};
+
+			reg_snvs_3v: vsnvs {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			reg_vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1_1v5: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				/* not used */
+			};
+
+			reg_vgen2_1v2_eth: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			reg_vgen3_2v8: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen4_1v8: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5_1v8_eth: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6_3v3: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-tqma6a.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-tqma6a.dtsi
new file mode 100644
index 000000000..f94a5d80c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-tqma6a.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_tqma6>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pf0100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	sensor0: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	eeprom0: m24c64@50 {
+		compatible = "st,24c64", "at24";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-tqma6b.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-tqma6b.dtsi
new file mode 100644
index 000000000..682f55370
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-tqma6b.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2020 TQ-Systems GmbH
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_tqma6>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pf0100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	sensor0: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	eeprom0: m24c64@50 {
+		compatible = "st,24c64", "at24";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-u-boot.dtsi
new file mode 100644
index 000000000..1279cc233
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-u-boot.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/ {
+	aliases {
+		usb0 = &usbotg;
+		video0 = &ipu1;
+	};
+
+	soc {
+		u-boot,dm-spl;
+		u-boot,dm-pre-reloc;
+
+		aips-bus@2000000 {
+			u-boot,dm-spl;
+			spba-bus@2000000 {
+				u-boot,dm-spl;
+			};
+		};
+
+		aips-bus@2100000 {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&ipu1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-udoo-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-udoo-u-boot.dtsi
new file mode 100644
index 000000000..749791a13
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-udoo-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-udoo.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-udoo.dtsi
new file mode 100644
index 000000000..d07d8f834
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-udoo.dtsi
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+/ {
+	aliases {
+		backlight = &backlight;
+		panelchan = &panelchan;
+		panel7 = &panel7;
+		touchscreenp7 = &touchscreenp7;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio1 4 0>;
+		default-on;
+		status = "disabled";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 0>;
+		pinctrl-0 = <&pinctrl_power_off>;
+		pinctrl-names = "default";
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel7: panel7 {
+		/*
+		 * in reality it is a -20t (parallel) model,
+		 * but with LVDS bridge chip attached,
+		 * so it is equivalent to -19t model in drive
+		 * characteristics
+		 */
+		compatible = "urt,umsh-8596md-19t";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_panel>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_h1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
+			gpio = <&gpio7 12 0>;
+		};
+
+		reg_panel: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd_panel";
+			enable-active-high;
+			gpio = <&gpio1 2 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-udoo-ac97",
+			     "fsl,imx-audio-ac97";
+		model = "fsl,imx6q-udoo-ac97";
+		audio-cpu = <&ssi1>;
+		audio-routing =
+			"RX", "Mic Jack",
+			"Headphone Jack", "TX";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreenp7: touchscreenp7@55 {
+		compatible = "sitronix,st1232";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreenp7>;
+		reg = <0x55>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 8>;
+		gpios = <&gpio1 15 0>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	imx6q-udoo {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+			>;
+		};
+
+		pinctrl_panel: panelgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
+			>;
+		};
+
+		pinctrl_power_off: poweroffgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
+			>;
+		};
+
+		pinctrl_touchscreenp7: touchscreenp7grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh: usbhgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotg {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+				MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_ac97_running: ac97running {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_warm_reset: ac97warmreset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_reset: ac97reset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	panelchan: lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	clocks = <&clks IMX6QDL_CLK_CKO>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+};
+
+&ssi1 {
+	cell-index = <0>;
+	fsl,mode = "ac97-slave";
+	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&pinctrl_ac97_running>;
+	pinctrl-1 = <&pinctrl_ac97_reset>;
+	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
+	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-wandboard-revb1.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-wandboard-revb1.dtsi
new file mode 100644
index 000000000..e781a4578
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-wandboard-revb1.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi
new file mode 100644
index 000000000..939097968
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "ETH_PHY";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-supply = <&reg_eth_phy>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__USB_OTG_PWR		0x80000000	/* USB Power Enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-wandboard.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-wandboard.dtsi
new file mode 100644
index 000000000..35a88bf5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl-wandboard.dtsi
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	sound {
+		compatible = "fsl,imx6-wandboard-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-wandboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		lrclk-strength = <3>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx6qdl-wandboard {
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_mclk: mclkgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usbotgvbus: usbotgvbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl.dtsi
new file mode 100644
index 000000000..e4daf1508
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qdl.dtsi
@@ -0,0 +1,1338 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; };
+
+	aliases {
+		ethernet0 = &fec;
+		can0 = &can1;
+		can1 = &can2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		ipu0 = &ipu1;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	tempmon: tempmon {
+		compatible = "fsl,imx6q-tempmon";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,tempmon = <&anatop>;
+		fsl,tempmon-data = <&ocotp>;
+		clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	};
+
+	ldb: ldb {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+		gpr = <&gpr>;
+		status = "disabled";
+
+		lvds-channel@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				lvds0_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds0_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds0>;
+				};
+			};
+		};
+
+		lvds-channel@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				lvds1_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds1_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds1>;
+				};
+			};
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		dma_apbh: dma-apbh@110000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x00110000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
+		};
+
+		gpmi: gpmi-nand@112000 {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
+				 <&clks IMX6QDL_CLK_GPMI_APB>,
+				 <&clks IMX6QDL_CLK_GPMI_BCH>,
+				 <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6QDL_CLK_PER1_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		hdmi: hdmi@120000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00120000 0x9000>;
+			interrupts = <0 115 0x04>;
+			gpr = <&gpr>;
+			clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+				 <&clks IMX6QDL_CLK_HDMI_ISFR>;
+			clock-names = "iahb", "isfr";
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_hdmi>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_hdmi>;
+				};
+			};
+		};
+
+		gpu_3d: gpu@130000 {
+			compatible = "vivante,gc";
+			reg = <0x00130000 0x4000>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
+				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+			clock-names = "bus", "core", "shader";
+			power-domains = <&pd_pu>;
+		};
+
+		gpu_2d: gpu@134000 {
+			compatible = "vivante,gc";
+			reg = <0x00134000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+		};
+
+		timer@a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+			interrupt-parent = <&intc>;
+			clocks = <&clks IMX6QDL_CLK_TWD>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: l2-cache@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+			arm,shared-override;
+		};
+
+		pcie: pcie@1ffc000 {
+			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			reg = <0x01ffc000 0x04000>,
+			      <0x01f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
+				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
+			status = "disabled";
+		};
+
+		aips-bus@2000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
+						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "core",  "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
+						 <&clks IMX6QDL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
+						 <&clks IMX6QDL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
+						 <&clks IMX6QDL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
+						 <&clks IMX6QDL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+						 <&clks IMX6QDL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				esai: esai@2024000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx35-esai";
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_ESAI_MEM>,
+						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "core", "mem", "extal", "fsys", "spba";
+					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
+						 <&clks IMX6QDL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
+						 <&clks IMX6QDL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
+						 <&clks IMX6QDL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx53-asrc";
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+						<&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+							"txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
+
+				spba@203c000 {
+					reg = <0x0203c000 0x4000>;
+				};
+			};
+
+			vpu: vpu@2040000 {
+				compatible = "cnm,coda960";
+				reg = <0x02040000 0x3c000>;
+				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "bit", "jpeg";
+				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
+					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
+				clock-names = "per", "ahb";
+				power-domains = <&pd_pu>;
+				resets = <&src 1>;
+				iram = <&ocram>;
+			};
+
+			aipstz@207c000 { /* AIPSTZ1 */
+				reg = <0x0207c000 0x4000>;
+			};
+
+			pwm1: pwm@2080000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm2: pwm@2084000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm3: pwm@2088000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm4: pwm@208c000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can1: flexcan@2090000 {
+				compatible = "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
+					 <&clks IMX6QDL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: flexcan@2094000 {
+				compatible = "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
+					 <&clks IMX6QDL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt: gpt@2098000 {
+				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
+					 <&clks IMX6QDL_CLK_GPT_IPG_PER>,
+					 <&clks IMX6QDL_CLK_GPT_3M>;
+				clock-names = "ipg", "per", "osc_per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@20b4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 79 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@20b8000 {
+				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@20bc000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_DUMMY>;
+			};
+
+			wdog2: wdog@20c0000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			clks: ccm@20c4000 {
+				compatible = "fsl,imx6q-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
+				};
+
+				regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-enable-ramp-delay = <150>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx6q-snvs-lpgpr";
+				};
+			};
+
+			epit1: epit@20d0000 { /* EPIT1 */
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 { /* EPIT2 */
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@20d8000 {
+				compatible = "fsl,imx6q-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+						         <&clks IMX6QDL_CLK_GPU2D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU2D_AXI>,
+						         <&clks IMX6QDL_CLK_OPENVG_AXI>,
+						         <&clks IMX6QDL_CLK_VPU_AXI>;
+					};
+				};
+			};
+
+			gpr: iomuxc-gpr@20e0000 {
+				compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				reg = <0x20e0000 0x38>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+				};
+			};
+
+			iomuxc: iomuxc@20e0000 {
+				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
+				reg = <0x20e0000 0x4000>;
+			};
+
+			dcic1: dcic@20e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			dcic2: dcic@20e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdma: sdma@20ec000 {
+				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_SDMA>,
+					 <&clks IMX6QDL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		aips-bus@2100000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: caam@2100000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2100000 0x10000>;
+				ranges = <0 0x2100000 0x10000>;
+				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
+					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
+					 <&clks IMX6QDL_CLK_CAAM_IPG>,
+					 <&clks IMX6QDL_CLK_EIM_SLOW>;
+				clock-names = "mem", "aclk", "ipg", "emi_slow";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			aipstz@217c000 { /* AIPSTZ2 */
+				reg = <0x0217c000 0x4000>;
+			};
+
+			usbotg: usb@2184000 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh1: usb@2184200 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh2: usb@2184400 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh3: usb@2184600 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184600 0x200>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+			};
+
+			fec: ethernet@2188000 {
+				compatible = "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts-extended =
+					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
+					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_ENET>,
+					 <&clks IMX6QDL_CLK_ENET>,
+					 <&clks IMX6QDL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			mlb@218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usdhc1: usdhc@2190000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC1>,
+					 <&clks IMX6QDL_CLK_USDHC1>,
+					 <&clks IMX6QDL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@2194000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC2>,
+					 <&clks IMX6QDL_CLK_USDHC2>,
+					 <&clks IMX6QDL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@2198000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC3>,
+					 <&clks IMX6QDL_CLK_USDHC3>,
+					 <&clks IMX6QDL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: usdhc@219c000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC4>,
+					 <&clks IMX6QDL_CLK_USDHC4>,
+					 <&clks IMX6QDL_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			romcp@21ac000 {
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc0: mmdc@21b0000 { /* MMDC0 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			mmdc1: mmdc@21b4000 { /* MMDC1 */
+				reg = <0x021b4000 0x4000>;
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@21bc000 {
+				compatible = "fsl,imx6q-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6QDL_CLK_IIM>;
+			};
+
+			tzasc@21d0000 { /* TZASC1 */
+				reg = <0x021d0000 0x4000>;
+				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			tzasc@21d4000 { /* TZASC2 */
+				reg = <0x021d4000 0x4000>;
+				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			mipi_csi: mipi@21dc000 {
+				compatible = "fsl,imx6-mipi-csi2";
+				reg = <0x021dc000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 100 0x04>, <0 101 0x04>;
+				clocks = <&clks IMX6QDL_CLK_HSI_TX>,
+					 <&clks IMX6QDL_CLK_VIDEO_27M>,
+					 <&clks IMX6QDL_CLK_EIM_PODF>;
+				clock-names = "dphy", "ref", "pix";
+				status = "disabled";
+			};
+
+			mipi_dsi: mipi@21e0000 {
+				reg = <0x021e0000 0x4000>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mipi_mux_0: endpoint {
+							remote-endpoint = <&ipu1_di0_mipi>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_mux_1: endpoint {
+							remote-endpoint = <&ipu1_di1_mipi>;
+						};
+					};
+				};
+			};
+
+			vdoa@21e4000 {
+				compatible = "fsl,imx6q-vdoa";
+				reg = <0x021e4000 0x4000>;
+				interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_VDOA>;
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		ipu1: ipu@2400000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx6q-ipu";
+			reg = <0x02400000 0x400000>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_IPU1>,
+				 <&clks IMX6QDL_CLK_IPU1_DI0>,
+				 <&clks IMX6QDL_CLK_IPU1_DI1>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu1_csi0: port@0 {
+				reg = <0>;
+
+				ipu1_csi0_from_ipu1_csi0_mux: endpoint {
+					remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
+				};
+			};
+
+			ipu1_csi1: port@1 {
+				reg = <1>;
+			};
+
+			ipu1_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu1_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu1_di0_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_0>;
+				};
+
+				ipu1_di0_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_0>;
+				};
+
+				ipu1_di0_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_0>;
+				};
+
+				ipu1_di0_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_0>;
+				};
+			};
+
+			ipu1_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu1_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu1_di1_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_1>;
+				};
+
+				ipu1_di1_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_1>;
+				};
+
+				ipu1_di1_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_1>;
+				};
+
+				ipu1_di1_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_1>;
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
new file mode 100644
index 000000000..d75fcc101
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6qp-sabreauto.dts b/roms/u-boot/arch/arm/dts/imx6qp-sabreauto.dts
new file mode 100644
index 000000000..d4caeeb0a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qp-sabreauto.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+&i2c2 {
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx6qdl-sabreauto {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qp-sabresd-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
new file mode 100644
index 000000000..e4d7d2819
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx6qp-sabresd.dts b/roms/u-boot/arch/arm/dts/imx6qp-sabresd.dts
new file mode 100644
index 000000000..f1b9cb104
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qp-sabresd.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+	imx6qdl-sabresd {
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qp-wandboard-revd1.dts b/roms/u-boot/arch/arm/dts/imx6qp-wandboard-revd1.dts
new file mode 100644
index 000000000..08d8b78a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qp-wandboard-revd1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 QuadPlus Board revD1";
+	compatible = "wand,imx6qp-wandboard", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6qp.dtsi b/roms/u-boot/arch/arm/dts/imx6qp.dtsi
new file mode 100644
index 000000000..5f51f8e5c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6qp.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+#include "imx6q.dtsi"
+
+/ {
+	soc {
+		ocram2: sram@940000 {
+			compatible = "mmio-sram";
+			reg = <0x00940000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		ocram3: sram@960000 {
+			compatible = "mmio-sram";
+			reg = <0x00960000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		aips-bus@2100000 {
+			pre1: pre@21c8000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021c8000 0x1000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE0>;
+				clock-names = "axi";
+				fsl,iram = <&ocram2>;
+			};
+
+			pre2: pre@21c9000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021c9000 0x1000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE1>;
+				clock-names = "axi";
+				fsl,iram = <&ocram2>;
+			};
+
+			pre3: pre@21ca000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021ca000 0x1000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE2>;
+				clock-names = "axi";
+				fsl,iram = <&ocram3>;
+			};
+
+			pre4: pre@21cb000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021cb000 0x1000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE3>;
+				clock-names = "axi";
+				fsl,iram = <&ocram3>;
+			};
+
+			prg1: prg@21cc000 {
+				compatible = "fsl,imx6qp-prg";
+				reg = <0x021cc000 0x1000>;
+				clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
+					 <&clks IMX6QDL_CLK_PRG0_AXI>;
+				clock-names = "ipg", "axi";
+				fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+			};
+
+			prg2: prg@21cd000 {
+				compatible = "fsl,imx6qp-prg";
+				reg = <0x021cd000 0x1000>;
+				clocks = <&clks IMX6QDL_CLK_PRG1_APB>,
+					 <&clks IMX6QDL_CLK_PRG1_AXI>;
+				clock-names = "ipg", "axi";
+				fsl,pres = <&pre4>, <&pre2>, <&pre3>;
+			};
+		};
+	};
+};
+
+&fec {
+	/delete-property/interrupts-extended;
+	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpc {
+	compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc";
+};
+
+&ipu1 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+	fsl,prg = <&prg1>;
+};
+
+&ipu2 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+	fsl,prg = <&prg2>;
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+		      "di0", "di1";
+};
+
+&mmdc0 {
+	compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
+};
+
+&pcie {
+	compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sl-evk.dts b/roms/u-boot/arch/arm/dts/imx6sl-evk.dts
new file mode 100644
index 000000000..0a90eea17
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sl-evk.dts
@@ -0,0 +1,641 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloLite EVK Board";
+	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_aud3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply-3v15";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-boot-on;
+		};
+
+		reg_aud4v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "wm8962-supply-4v2";
+			regulator-min-microvolt = <4325000>;
+			regulator-max-microvolt = <4325000>;
+			regulator-boot-on;
+		};
+
+		reg_lcd_3v3: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "lcd-3v3";
+			gpio = <&gpio4 3 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 11 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6sl-evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
+				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
+				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
+				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
+				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
+				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
+				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
+				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
+				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
+				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
+				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
+			>;
+		};
+
+		pinctrl_fec_sleep: fecgrp-sleep {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
+				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
+				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
+				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
+				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
+				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
+				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
+				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
+				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
+				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
+				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
+				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
+				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
+				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
+				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
+				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
+				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
+				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
+				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
+				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
+				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
+				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
+				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
+				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
+				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
+				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
+				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
+				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
+				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
+				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
+				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
+				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
+				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
+				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
+				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
+				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
+				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
+				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
+				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
+				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+			>;
+		};
+
+		pinctrl_pwm1: pwmgrp {
+			fsl,pins = <
+				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			>;
+		};
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
+			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
+			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
+			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
+			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
+			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <89>;
+				hfront-porch = <164>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sl-pinfunc.h b/roms/u-boot/arch/arm/dts/imx6sl-pinfunc.h
new file mode 100644
index 000000000..77b17bcc7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sl-pinfunc.h
@@ -0,0 +1,1077 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SL_PINFUNC_H
+#define __DTS_IMX6SL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT          0x04c 0x2a4 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_MCLK__PWM4_OUT               0x04c 0x2a4 0x000 0x1 0x0
+#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY             0x04c 0x2a4 0x6b4 0x2 0x0
+#define MX6SL_PAD_AUD_MCLK__FEC_MDC                0x04c 0x2a4 0x000 0x3 0x0
+#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB      0x04c 0x2a4 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06             0x04c 0x2a4 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK          0x04c 0x2a4 0x7f4 0x6 0x0
+#define MX6SL_PAD_AUD_RXC__AUD3_RXC                0x050 0x2a8 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXC__I2C1_SDA                0x050 0x2a8 0x720 0x1 0x0
+#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA           0x050 0x2a8 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA           0x050 0x2a8 0x80c 0x2 0x0
+#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK              0x050 0x2a8 0x70c 0x3 0x0
+#define MX6SL_PAD_AUD_RXC__I2C3_SDA                0x050 0x2a8 0x730 0x4 0x0
+#define MX6SL_PAD_AUD_RXC__GPIO1_IO01              0x050 0x2a8 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1              0x050 0x2a8 0x6c4 0x6 0x0
+#define MX6SL_PAD_AUD_RXD__AUD3_RXD                0x054 0x2ac 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI             0x054 0x2ac 0x6bc 0x1 0x0
+#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA           0x054 0x2ac 0x814 0x2 0x0
+#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA           0x054 0x2ac 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXD__FEC_RX_ER               0x054 0x2ac 0x708 0x3 0x0
+#define MX6SL_PAD_AUD_RXD__SD1_LCTL                0x054 0x2ac 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_RXD__GPIO1_IO02              0x054 0x2ac 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS              0x058 0x2b0 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXFS__I2C1_SCL               0x058 0x2b0 0x71c 0x1 0x0
+#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA          0x058 0x2b0 0x80c 0x2 0x1
+#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA          0x058 0x2b0 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXFS__FEC_MDIO               0x058 0x2b0 0x6f4 0x3 0x0
+#define MX6SL_PAD_AUD_RXFS__I2C3_SCL               0x058 0x2b0 0x72c 0x4 0x0
+#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00             0x058 0x2b0 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0             0x058 0x2b0 0x6c0 0x6 0x0
+#define MX6SL_PAD_AUD_TXC__AUD3_TXC                0x05c 0x2b4 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO             0x05c 0x2b4 0x6b8 0x1 0x0
+#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA           0x05c 0x2b4 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA           0x05c 0x2b4 0x814 0x2 0x1
+#define MX6SL_PAD_AUD_TXC__FEC_RX_DV               0x05c 0x2b4 0x704 0x3 0x0
+#define MX6SL_PAD_AUD_TXC__SD2_LCTL                0x05c 0x2b4 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXC__GPIO1_IO03              0x05c 0x2b4 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_TXD__AUD3_TXD                0x060 0x2b8 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK             0x060 0x2b8 0x6b0 0x1 0x0
+#define MX6SL_PAD_AUD_TXD__UART4_CTS_B             0x060 0x2b8 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXD__UART4_RTS_B             0x060 0x2b8 0x810 0x2 0x0
+#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0            0x060 0x2b8 0x000 0x3 0x0
+#define MX6SL_PAD_AUD_TXD__SD4_LCTL                0x060 0x2b8 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXD__GPIO1_IO05              0x060 0x2b8 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS              0x064 0x2bc 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXFS__PWM3_OUT               0x064 0x2bc 0x000 0x1 0x0
+#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B            0x064 0x2bc 0x810 0x2 0x1
+#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B            0x064 0x2bc 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1           0x064 0x2bc 0x6fc 0x3 0x0
+#define MX6SL_PAD_AUD_TXFS__SD3_LCTL               0x064 0x2bc 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04             0x064 0x2bc 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO         0x068 0x358 0x684 0x0 0x0
+#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS           0x068 0x358 0x5f8 0x1 0x0
+#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B         0x068 0x358 0x818 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B         0x068 0x358 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0           0x068 0x358 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_MISO__SD2_WP              0x068 0x358 0x834 0x4 0x0
+#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10          0x068 0x358 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI         0x06c 0x35c 0x688 0x0 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC            0x06c 0x35c 0x5f4 0x1 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA       0x06c 0x35c 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA       0x06c 0x35c 0x81c 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1          0x06c 0x35c 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT         0x06c 0x35c 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09          0x06c 0x35c 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK         0x070 0x360 0x67c 0x0 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD            0x070 0x360 0x5e8 0x1 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA       0x070 0x360 0x81c 0x2 0x1
+#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA       0x070 0x360 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0          0x070 0x360 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET           0x070 0x360 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08          0x070 0x360 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC         0x070 0x360 0x820 0x6 0x0
+#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0           0x074 0x364 0x68c 0x0 0x0
+#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD             0x074 0x364 0x5e4 0x1 0x0
+#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B          0x074 0x364 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B          0x074 0x364 0x818 0x2 0x1
+#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1            0x074 0x364 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B             0x074 0x364 0x830 0x4 0x0
+#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11           0x074 0x364 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR         0x074 0x364 0x000 0x6 0x0
+#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO         0x078 0x368 0x6a0 0x0 0x0
+#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0     0x078 0x368 0x000 0x1 0x0
+#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B         0x078 0x368 0x808 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B         0x078 0x368 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK            0x078 0x368 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI2_MISO__SD1_WP              0x078 0x368 0x82c 0x4 0x0
+#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14          0x078 0x368 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC         0x078 0x368 0x824 0x6 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI         0x07c 0x36c 0x6a4 0x0 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1     0x07c 0x36c 0x000 0x1 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA       0x07c 0x36c 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA       0x07c 0x36c 0x80c 0x2 0x2
+#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC           0x07c 0x36c 0x670 0x3 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT         0x07c 0x36c 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13          0x07c 0x36c 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK         0x080 0x370 0x69c 0x0 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK       0x080 0x370 0x7f4 0x1 0x1
+#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA       0x080 0x370 0x80c 0x2 0x3
+#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA       0x080 0x370 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK          0x080 0x370 0x674 0x3 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET           0x080 0x370 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12          0x080 0x370 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC         0x080 0x370 0x820 0x6 0x1
+#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0           0x084 0x374 0x6a8 0x0 0x0
+#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3           0x084 0x374 0x698 0x1 0x0
+#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B          0x084 0x374 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B          0x084 0x374 0x808 0x2 0x1
+#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC            0x084 0x374 0x678 0x3 0x0
+#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B             0x084 0x374 0x828 0x4 0x0
+#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15           0x084 0x374 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR         0x084 0x374 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0             0x088 0x378 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_BDR0__SD4_CLK               0x088 0x378 0x850 0x1 0x0
+#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B           0x088 0x378 0x808 0x2 0x2
+#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B           0x088 0x378 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26            0x088 0x378 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_BDR0__SPDC_RL               0x088 0x378 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05            0x088 0x378 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7            0x088 0x378 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1             0x08c 0x37c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_BDR1__SD4_CMD               0x08c 0x37c 0x858 0x1 0x0
+#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B           0x08c 0x37c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B           0x08c 0x37c 0x808 0x2 0x3
+#define MX6SL_PAD_EPDC_BDR1__EIM_CRE               0x08c 0x37c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_BDR1__SPDC_UD               0x08c 0x37c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06            0x08c 0x37c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8            0x08c 0x37c 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_D0__EPDC_DATA00             0x090 0x380 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI             0x090 0x380 0x6d8 0x1 0x0
+#define MX6SL_PAD_EPDC_D0__LCD_DATA24              0x090 0x380 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D0__CSI_DATA00              0x090 0x380 0x630 0x3 0x0
+#define MX6SL_PAD_EPDC_D0__SPDC_DATA00             0x090 0x380 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D0__GPIO1_IO07              0x090 0x380 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D1__EPDC_DATA01             0x094 0x384 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO             0x094 0x384 0x6d4 0x1 0x0
+#define MX6SL_PAD_EPDC_D1__LCD_DATA25              0x094 0x384 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D1__CSI_DATA01              0x094 0x384 0x634 0x3 0x0
+#define MX6SL_PAD_EPDC_D1__SPDC_DATA01             0x094 0x384 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D1__GPIO1_IO08              0x094 0x384 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D10__EPDC_DATA10            0x098 0x388 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0             0x098 0x388 0x6c0 0x1 0x1
+#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2         0x098 0x388 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D10__EIM_ADDR18             0x098 0x388 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D10__SPDC_DATA10            0x098 0x388 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D10__GPIO1_IO17             0x098 0x388 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D10__SD4_WP                 0x098 0x388 0x87c 0x6 0x0
+#define MX6SL_PAD_EPDC_D11__EPDC_DATA11            0x09c 0x38c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK            0x09c 0x38c 0x6b0 0x1 0x1
+#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3         0x09c 0x38c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D11__EIM_ADDR19             0x09c 0x38c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D11__SPDC_DATA11            0x09c 0x38c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D11__GPIO1_IO18             0x09c 0x38c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D11__SD4_CD_B               0x09c 0x38c 0x854 0x6 0x0
+#define MX6SL_PAD_EPDC_D12__EPDC_DATA12            0x0a0 0x390 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA          0x0a0 0x390 0x804 0x1 0x0
+#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA          0x0a0 0x390 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM           0x0a0 0x390 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D12__EIM_ADDR20             0x0a0 0x390 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D12__SPDC_DATA12            0x0a0 0x390 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D12__GPIO1_IO19             0x0a0 0x390 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1             0x0a0 0x390 0x6c4 0x6 0x1
+#define MX6SL_PAD_EPDC_D13__EPDC_DATA13            0x0a4 0x394 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA          0x0a4 0x394 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA          0x0a4 0x394 0x804 0x1 0x1
+#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ           0x0a4 0x394 0x6e8 0x2 0x0
+#define MX6SL_PAD_EPDC_D13__EIM_ADDR21             0x0a4 0x394 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D13__SPDC_DATA13            0x0a4 0x394 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D13__GPIO1_IO20             0x0a4 0x394 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2             0x0a4 0x394 0x6c8 0x6 0x0
+#define MX6SL_PAD_EPDC_D14__EPDC_DATA14            0x0a8 0x398 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D14__UART2_RTS_B            0x0a8 0x398 0x800 0x1 0x0
+#define MX6SL_PAD_EPDC_D14__UART2_CTS_B            0x0a8 0x398 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT          0x0a8 0x398 0x6ec 0x2 0x0
+#define MX6SL_PAD_EPDC_D14__EIM_ADDR22             0x0a8 0x398 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D14__SPDC_DATA14            0x0a8 0x398 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D14__GPIO1_IO21             0x0a8 0x398 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3             0x0a8 0x398 0x6cc 0x6 0x0
+#define MX6SL_PAD_EPDC_D15__EPDC_DATA15            0x0ac 0x39c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D15__UART2_CTS_B            0x0ac 0x39c 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D15__UART2_RTS_B            0x0ac 0x39c 0x800 0x1 0x1
+#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE          0x0ac 0x39c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D15__EIM_ADDR23             0x0ac 0x39c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D15__SPDC_DATA15            0x0ac 0x39c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D15__GPIO1_IO22             0x0ac 0x39c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY             0x0ac 0x39c 0x6b4 0x6 0x1
+#define MX6SL_PAD_EPDC_D2__EPDC_DATA02             0x0b0 0x3a0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0              0x0b0 0x3a0 0x6dc 0x1 0x0
+#define MX6SL_PAD_EPDC_D2__LCD_DATA26              0x0b0 0x3a0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D2__CSI_DATA02              0x0b0 0x3a0 0x638 0x3 0x0
+#define MX6SL_PAD_EPDC_D2__SPDC_DATA02             0x0b0 0x3a0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D2__GPIO1_IO09              0x0b0 0x3a0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D3__EPDC_DATA03             0x0b4 0x3a4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK             0x0b4 0x3a4 0x6d0 0x1 0x0
+#define MX6SL_PAD_EPDC_D3__LCD_DATA27              0x0b4 0x3a4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D3__CSI_DATA03              0x0b4 0x3a4 0x63c 0x3 0x0
+#define MX6SL_PAD_EPDC_D3__SPDC_DATA03             0x0b4 0x3a4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D3__GPIO1_IO10              0x0b4 0x3a4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D4__EPDC_DATA04             0x0b8 0x3a8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1              0x0b8 0x3a8 0x6e0 0x1 0x0
+#define MX6SL_PAD_EPDC_D4__LCD_DATA28              0x0b8 0x3a8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D4__CSI_DATA04              0x0b8 0x3a8 0x640 0x3 0x0
+#define MX6SL_PAD_EPDC_D4__SPDC_DATA04             0x0b8 0x3a8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D4__GPIO1_IO11              0x0b8 0x3a8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D5__EPDC_DATA05             0x0bc 0x3ac 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2              0x0bc 0x3ac 0x6e4 0x1 0x0
+#define MX6SL_PAD_EPDC_D5__LCD_DATA29              0x0bc 0x3ac 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D5__CSI_DATA05              0x0bc 0x3ac 0x644 0x3 0x0
+#define MX6SL_PAD_EPDC_D5__SPDC_DATA05             0x0bc 0x3ac 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D5__GPIO1_IO12              0x0bc 0x3ac 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D6__EPDC_DATA06             0x0c0 0x3b0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3              0x0c0 0x3b0 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D6__LCD_DATA30              0x0c0 0x3b0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D6__CSI_DATA06              0x0c0 0x3b0 0x648 0x3 0x0
+#define MX6SL_PAD_EPDC_D6__SPDC_DATA06             0x0c0 0x3b0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D6__GPIO1_IO13              0x0c0 0x3b0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D7__EPDC_DATA07             0x0c4 0x3b4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY              0x0c4 0x3b4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D7__LCD_DATA31              0x0c4 0x3b4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D7__CSI_DATA07              0x0c4 0x3b4 0x64c 0x3 0x0
+#define MX6SL_PAD_EPDC_D7__SPDC_DATA07             0x0c4 0x3b4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D7__GPIO1_IO14              0x0c4 0x3b4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D8__EPDC_DATA08             0x0c8 0x3b8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI             0x0c8 0x3b8 0x6bc 0x1 0x1
+#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0          0x0c8 0x3b8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D8__EIM_ADDR16              0x0c8 0x3b8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D8__SPDC_DATA08             0x0c8 0x3b8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D8__GPIO1_IO15              0x0c8 0x3b8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D8__SD4_RESET               0x0c8 0x3b8 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_D9__EPDC_DATA09             0x0cc 0x3bc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO             0x0cc 0x3bc 0x6b8 0x1 0x1
+#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1          0x0cc 0x3bc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D9__EIM_ADDR17              0x0cc 0x3bc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D9__SPDC_DATA09             0x0cc 0x3bc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D9__GPIO1_IO16              0x0cc 0x3bc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D9__SD4_VSELECT             0x0cc 0x3bc 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK           0x0d0 0x3c0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2           0x0d0 0x3c0 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR            0x0d0 0x3c0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK           0x0d0 0x3c0 0x674 0x3 0x1
+#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL            0x0d0 0x3c0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31           0x0d0 0x3c0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET            0x0d0 0x3c0 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE             0x0d4 0x3c4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3            0x0d4 0x3c4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER             0x0d4 0x3c4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC             0x0d4 0x3c4 0x670 0x3 0x1
+#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL             0x0d4 0x3c4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00            0x0d4 0x3c4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT           0x0d4 0x3c4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL             0x0d8 0x3c8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY            0x0d8 0x3c8 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR           0x0d8 0x3c8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK              0x0d8 0x3c8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL           0x0d8 0x3c8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01            0x0d8 0x3c8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDRL__SD2_WP                0x0d8 0x3c8 0x834 0x6 0x1
+#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP             0x0dc 0x3cc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT              0x0dc 0x3cc 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR           0x0dc 0x3cc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC             0x0dc 0x3cc 0x678 0x3 0x1
+#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL           0x0dc 0x3cc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02            0x0dc 0x3cc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B              0x0dc 0x3cc 0x830 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM        0x0e0 0x3d0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0           0x0e0 0x3d0 0x85c 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20          0x0e0 0x3d0 0x7c8 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK            0x0e0 0x3d0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID         0x0e0 0x3d0 0x5dc 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11          0x0e0 0x3d0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET           0x0e0 0x3d0 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0    0x0e4 0x3d4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC          0x0e4 0x3d4 0x604 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16        0x0e4 0x3d4 0x7b8 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW            0x0e4 0x3d4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL         0x0e4 0x3d4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07        0x0e4 0x3d4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET         0x0e4 0x3d4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1    0x0e8 0x3d8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS         0x0e8 0x3d8 0x610 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17        0x0e8 0x3d8 0x7bc 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B          0x0e8 0x3d8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL         0x0e8 0x3d8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08        0x0e8 0x3d8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT       0x0e8 0x3d8 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2    0x0ec 0x3dc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD          0x0ec 0x3dc 0x600 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18        0x0ec 0x3dc 0x7c0 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B         0x0ec 0x3dc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL       0x0ec 0x3dc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09        0x0ec 0x3dc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP            0x0ec 0x3dc 0x87c 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3    0x0f0 0x3e0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC          0x0f0 0x3e0 0x60c 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19        0x0f0 0x3e0 0x7c4 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B         0x0f0 0x3e0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL       0x0f0 0x3e0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10        0x0f0 0x3e0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B          0x0f0 0x3e0 0x854 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ        0x0f4 0x3e4 0x6e8 0x0 0x1
+#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1           0x0f4 0x3e4 0x860 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21          0x0f4 0x3e4 0x7cc 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN    0x0f4 0x3e4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID         0x0f4 0x3e4 0x5e0 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12          0x0f4 0x3e4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT         0x0f4 0x3e4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT      0x0f8 0x3e8 0x6ec 0x0 0x1
+#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2          0x0f8 0x3e8 0x864 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22         0x0f8 0x3e8 0x7d0 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B         0x0f8 0x3e8 0x884 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI         0x0f8 0x3e8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13         0x0f8 0x3e8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP             0x0f8 0x3e8 0x84c 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE    0x0fc 0x3ec 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3        0x0fc 0x3ec 0x868 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23       0x0fc 0x3ec 0x7d4 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B      0x0fc 0x3ec 0x880 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO       0x0fc 0x3ec 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14       0x0fc 0x3ec 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B         0x0fc 0x3ec 0x838 0x6 0x0
+#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0           0x100 0x3f0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1           0x100 0x3f0 0x6ac 0x1 0x0
+#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT             0x100 0x3f0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B            0x100 0x3f0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR            0x100 0x3f0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27           0x100 0x3f0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1           0x104 0x3f4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B              0x104 0x3f4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT             0x104 0x3f4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B            0x104 0x3f4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER            0x104 0x3f4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28           0x104 0x3f4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2           0x108 0x3f8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL             0x108 0x3f8 0x72c 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT             0x108 0x3f8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B            0x108 0x3f8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR          0x108 0x3f8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29           0x108 0x3f8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3           0x10c 0x3fc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA             0x10c 0x3fc 0x730 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT             0x10c 0x3fc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B            0x10c 0x3fc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR          0x10c 0x3fc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30           0x10c 0x3fc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P         0x110 0x400 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI          0x110 0x400 0x6a4 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL             0x110 0x400 0x724 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08           0x110 0x400 0x650 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL              0x110 0x400 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23           0x110 0x400 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE             0x114 0x404 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO           0x114 0x404 0x6a0 0x1 0x1
+#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA              0x114 0x404 0x728 0x2 0x0
+#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09            0x114 0x404 0x654 0x3 0x0
+#define MX6SL_PAD_EPDC_SDLE__SPDC_LD               0x114 0x404 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24            0x114 0x404 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE             0x118 0x408 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0            0x118 0x408 0x6a8 0x1 0x1
+#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR            0x118 0x408 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10            0x118 0x408 0x658 0x3 0x0
+#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL            0x118 0x408 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25            0x118 0x408 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR           0x11c 0x40c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK          0x11c 0x40c 0x69c 0x1 0x1
+#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4           0x11c 0x40c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11           0x11c 0x40c 0x65c 0x3 0x0
+#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR           0x11c 0x40c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26           0x11c 0x40c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0           0x120 0x410 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS            0x120 0x410 0x608 0x1 0x0
+#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA        0x120 0x410 0x80c 0x2 0x4
+#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA        0x120 0x410 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24           0x120 0x410 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0           0x120 0x410 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03           0x120 0x410 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5           0x120 0x410 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1           0x124 0x414 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD             0x124 0x414 0x5fc 0x1 0x0
+#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA        0x124 0x414 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA        0x124 0x414 0x80c 0x2 0x5
+#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25           0x124 0x414 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1           0x124 0x414 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04           0x124 0x414 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6           0x124 0x414 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV            0x128 0x418 0x704 0x0 0x1
+#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1            0x128 0x418 0x860 0x1 0x1
+#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC             0x128 0x418 0x624 0x2 0x0
+#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO          0x128 0x418 0x6d4 0x3 0x1
+#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2         0x128 0x418 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25           0x128 0x418 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31          0x128 0x418 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_MDC__FEC_MDC                 0x12c 0x41c 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_MDC__SD4_DATA4               0x12c 0x41c 0x86c 0x1 0x0
+#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT           0x12c 0x41c 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_MDC__SD1_RESET               0x12c 0x41c 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_MDC__SD3_RESET               0x12c 0x41c 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_MDC__GPIO4_IO23              0x12c 0x41c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_MDC__ARM_TRACE29             0x12c 0x41c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_MDIO__FEC_MDIO               0x130 0x420 0x6f4 0x0 0x1
+#define MX6SL_PAD_FEC_MDIO__SD4_CLK                0x130 0x420 0x850 0x1 0x1
+#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS              0x130 0x420 0x620 0x2 0x0
+#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0             0x130 0x420 0x6dc 0x3 0x1
+#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1           0x130 0x420 0x710 0x4 0x0
+#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20             0x130 0x420 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26            0x130 0x420 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT         0x134 0x424 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET           0x134 0x424 0x000 0x1 0x0
+#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B             0x134 0x424 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT            0x134 0x424 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY      0x134 0x424 0x62c 0x4 0x0
+#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26          0x134 0x424 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK       0x134 0x424 0x7f4 0x6 0x2
+#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER             0x138 0x428 0x708 0x0 0x1
+#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0             0x138 0x428 0x85c 0x1 0x1
+#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD              0x138 0x428 0x614 0x2 0x0
+#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI           0x138 0x428 0x6d8 0x3 0x1
+#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1          0x138 0x428 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19            0x138 0x428 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25           0x138 0x428 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0           0x13c 0x42c 0x6f8 0x0 0x0
+#define MX6SL_PAD_FEC_RXD0__SD4_DATA5              0x13c 0x42c 0x870 0x1 0x0
+#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID            0x13c 0x42c 0x5dc 0x2 0x1
+#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT            0x13c 0x42c 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT            0x13c 0x42c 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17             0x13c 0x42c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24            0x13c 0x42c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1           0x140 0x430 0x6fc 0x0 0x1
+#define MX6SL_PAD_FEC_RXD1__SD4_DATA2              0x140 0x430 0x864 0x1 0x1
+#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS              0x140 0x430 0x628 0x2 0x0
+#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1             0x140 0x430 0x6e0 0x3 0x1
+#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3           0x140 0x430 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18             0x140 0x430 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RXD1__FEC_COL                0x140 0x430 0x6f0 0x6 0x0
+#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK           0x144 0x434 0x70c 0x0 0x1
+#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD              0x144 0x434 0x858 0x1 0x1
+#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC             0x144 0x434 0x61c 0x2 0x0
+#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK          0x144 0x434 0x6d0 0x3 0x1
+#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2         0x144 0x434 0x714 0x4 0x0
+#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21           0x144 0x434 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27          0x144 0x434 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN             0x148 0x438 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6             0x148 0x438 0x874 0x1 0x0
+#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN              0x148 0x438 0x7f0 0x2 0x0
+#define MX6SL_PAD_FEC_TX_EN__SD1_WP                0x148 0x438 0x82c 0x3 0x1
+#define MX6SL_PAD_FEC_TX_EN__SD3_WP                0x148 0x438 0x84c 0x4 0x1
+#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22            0x148 0x438 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28           0x148 0x438 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0           0x14c 0x43c 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TXD0__SD4_DATA3              0x14c 0x43c 0x868 0x1 0x1
+#define MX6SL_PAD_FEC_TXD0__AUD6_TXD               0x14c 0x43c 0x618 0x2 0x0
+#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2             0x14c 0x43c 0x6e4 0x3 0x1
+#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN              0x14c 0x43c 0x718 0x4 0x0
+#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24             0x14c 0x43c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30            0x14c 0x43c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1           0x150 0x440 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TXD1__SD4_DATA7              0x150 0x440 0x878 0x1 0x0
+#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT              0x150 0x440 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_TXD1__SD1_CD_B               0x150 0x440 0x828 0x3 0x1
+#define MX6SL_PAD_FEC_TXD1__SD3_CD_B               0x150 0x440 0x838 0x4 0x1
+#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16             0x150 0x440 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK             0x150 0x440 0x700 0x6 0x0
+#define MX6SL_PAD_HSIC_DAT__USB_H_DATA             0x154 0x444 0x000 0x0 0x0
+#define MX6SL_PAD_HSIC_DAT__I2C1_SCL               0x154 0x444 0x71c 0x1 0x1
+#define MX6SL_PAD_HSIC_DAT__PWM1_OUT               0x154 0x444 0x000 0x2 0x0
+#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M    0x154 0x444 0x000 0x3 0x0
+#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19             0x154 0x444 0x000 0x5 0x0
+#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE        0x158 0x448 0x000 0x0 0x0
+#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA            0x158 0x448 0x720 0x1 0x1
+#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT            0x158 0x448 0x000 0x2 0x0
+#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0
+#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20          0x158 0x448 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SCL__I2C1_SCL               0x15c 0x44c 0x71c 0x0 0x2
+#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B            0x15c 0x44c 0x7f8 0x1 0x0
+#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B            0x15c 0x44c 0x000 0x1 0x0
+#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2             0x15c 0x44c 0x6c8 0x2 0x1
+#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0           0x15c 0x44c 0x6f8 0x3 0x1
+#define MX6SL_PAD_I2C1_SCL__SD3_RESET              0x15c 0x44c 0x000 0x4 0x0
+#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12             0x15c 0x44c 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1             0x15c 0x44c 0x690 0x6 0x0
+#define MX6SL_PAD_I2C1_SDA__I2C1_SDA               0x160 0x450 0x720 0x0 0x2
+#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B            0x160 0x450 0x000 0x1 0x0
+#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B            0x160 0x450 0x7f8 0x1 0x1
+#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3             0x160 0x450 0x6cc 0x2 0x1
+#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN              0x160 0x450 0x000 0x3 0x0
+#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT            0x160 0x450 0x000 0x4 0x0
+#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13             0x160 0x450 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2             0x160 0x450 0x694 0x6 0x0
+#define MX6SL_PAD_I2C2_SCL__I2C2_SCL               0x164 0x454 0x724 0x0 0x1
+#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS              0x164 0x454 0x5f0 0x1 0x0
+#define MX6SL_PAD_I2C2_SCL__SPDIF_IN               0x164 0x454 0x7f0 0x2 0x1
+#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1           0x164 0x454 0x000 0x3 0x0
+#define MX6SL_PAD_I2C2_SCL__SD3_WP                 0x164 0x454 0x84c 0x4 0x2
+#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14             0x164 0x454 0x000 0x5 0x0
+#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY             0x164 0x454 0x680 0x6 0x0
+#define MX6SL_PAD_I2C2_SDA__I2C2_SDA               0x168 0x458 0x728 0x0 0x1
+#define MX6SL_PAD_I2C2_SDA__AUD4_RXC               0x168 0x458 0x5ec 0x1 0x0
+#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT              0x168 0x458 0x000 0x2 0x0
+#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT            0x168 0x458 0x000 0x3 0x0
+#define MX6SL_PAD_I2C2_SDA__SD3_CD_B               0x168 0x458 0x838 0x4 0x2
+#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15             0x168 0x458 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL0__KEY_COL0               0x16c 0x474 0x734 0x0 0x0
+#define MX6SL_PAD_KEY_COL0__I2C2_SCL               0x16c 0x474 0x724 0x1 0x2
+#define MX6SL_PAD_KEY_COL0__LCD_DATA00             0x16c 0x474 0x778 0x2 0x0
+#define MX6SL_PAD_KEY_COL0__EIM_AD00               0x16c 0x474 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL0__SD1_CD_B               0x16c 0x474 0x828 0x4 0x2
+#define MX6SL_PAD_KEY_COL0__GPIO3_IO24             0x16c 0x474 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL1__KEY_COL1               0x170 0x478 0x738 0x0 0x0
+#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI            0x170 0x478 0x6d8 0x1 0x2
+#define MX6SL_PAD_KEY_COL1__LCD_DATA02             0x170 0x478 0x780 0x2 0x0
+#define MX6SL_PAD_KEY_COL1__EIM_AD02               0x170 0x478 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL1__SD3_DATA4              0x170 0x478 0x83c 0x4 0x0
+#define MX6SL_PAD_KEY_COL1__GPIO3_IO26             0x170 0x478 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL2__KEY_COL2               0x174 0x47c 0x73c 0x0 0x0
+#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0             0x174 0x47c 0x6dc 0x1 0x2
+#define MX6SL_PAD_KEY_COL2__LCD_DATA04             0x174 0x47c 0x788 0x2 0x0
+#define MX6SL_PAD_KEY_COL2__EIM_AD04               0x174 0x47c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL2__SD3_DATA6              0x174 0x47c 0x844 0x4 0x0
+#define MX6SL_PAD_KEY_COL2__GPIO3_IO28             0x174 0x47c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL3__KEY_COL3               0x178 0x480 0x740 0x0 0x0
+#define MX6SL_PAD_KEY_COL3__AUD6_RXFS              0x178 0x480 0x620 0x1 0x1
+#define MX6SL_PAD_KEY_COL3__LCD_DATA06             0x178 0x480 0x790 0x2 0x0
+#define MX6SL_PAD_KEY_COL3__EIM_AD06               0x178 0x480 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL3__SD4_DATA6              0x178 0x480 0x874 0x4 0x1
+#define MX6SL_PAD_KEY_COL3__GPIO3_IO30             0x178 0x480 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL3__SD1_RESET              0x178 0x480 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL4__KEY_COL4               0x17c 0x484 0x744 0x0 0x0
+#define MX6SL_PAD_KEY_COL4__AUD6_RXD               0x17c 0x484 0x614 0x1 0x1
+#define MX6SL_PAD_KEY_COL4__LCD_DATA08             0x17c 0x484 0x798 0x2 0x0
+#define MX6SL_PAD_KEY_COL4__EIM_AD08               0x17c 0x484 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL4__SD4_CLK                0x17c 0x484 0x850 0x4 0x2
+#define MX6SL_PAD_KEY_COL4__GPIO4_IO00             0x17c 0x484 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR           0x17c 0x484 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL5__KEY_COL5               0x180 0x488 0x748 0x0 0x0
+#define MX6SL_PAD_KEY_COL5__AUD6_TXFS              0x180 0x488 0x628 0x1 0x1
+#define MX6SL_PAD_KEY_COL5__LCD_DATA10             0x180 0x488 0x7a0 0x2 0x0
+#define MX6SL_PAD_KEY_COL5__EIM_AD10               0x180 0x488 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL5__SD4_DATA0              0x180 0x488 0x85c 0x4 0x2
+#define MX6SL_PAD_KEY_COL5__GPIO4_IO02             0x180 0x488 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR           0x180 0x488 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL6__KEY_COL6               0x184 0x48c 0x74c 0x0 0x0
+#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA          0x184 0x48c 0x814 0x1 0x2
+#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA          0x184 0x48c 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_COL6__LCD_DATA12             0x184 0x48c 0x7a8 0x2 0x0
+#define MX6SL_PAD_KEY_COL6__EIM_AD12               0x184 0x48c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL6__SD4_DATA2              0x184 0x48c 0x864 0x4 0x2
+#define MX6SL_PAD_KEY_COL6__GPIO4_IO04             0x184 0x48c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL6__SD3_RESET              0x184 0x48c 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL7__KEY_COL7               0x188 0x490 0x750 0x0 0x0
+#define MX6SL_PAD_KEY_COL7__UART4_RTS_B            0x188 0x490 0x810 0x1 0x2
+#define MX6SL_PAD_KEY_COL7__UART4_CTS_B            0x188 0x490 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_COL7__LCD_DATA14             0x188 0x490 0x7b0 0x2 0x0
+#define MX6SL_PAD_KEY_COL7__EIM_AD14               0x188 0x490 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL7__SD4_DATA4              0x188 0x490 0x86c 0x4 0x1
+#define MX6SL_PAD_KEY_COL7__GPIO4_IO06             0x188 0x490 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL7__SD1_WP                 0x188 0x490 0x82c 0x6 0x2
+#define MX6SL_PAD_KEY_ROW0__KEY_ROW0               0x18c 0x494 0x754 0x0 0x0
+#define MX6SL_PAD_KEY_ROW0__I2C2_SDA               0x18c 0x494 0x728 0x1 0x2
+#define MX6SL_PAD_KEY_ROW0__LCD_DATA01             0x18c 0x494 0x77c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW0__EIM_AD01               0x18c 0x494 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW0__SD1_WP                 0x18c 0x494 0x82c 0x4 0x3
+#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25             0x18c 0x494 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW1__KEY_ROW1               0x190 0x498 0x758 0x0 0x0
+#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO            0x190 0x498 0x6d4 0x1 0x2
+#define MX6SL_PAD_KEY_ROW1__LCD_DATA03             0x190 0x498 0x784 0x2 0x0
+#define MX6SL_PAD_KEY_ROW1__EIM_AD03               0x190 0x498 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW1__SD3_DATA5              0x190 0x498 0x840 0x4 0x0
+#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27             0x190 0x498 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW2__KEY_ROW2               0x194 0x49c 0x75c 0x0 0x0
+#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK            0x194 0x49c 0x6d0 0x1 0x2
+#define MX6SL_PAD_KEY_ROW2__LCD_DATA05             0x194 0x49c 0x78c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW2__EIM_AD05               0x194 0x49c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW2__SD3_DATA7              0x194 0x49c 0x848 0x4 0x0
+#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29             0x194 0x49c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW3__KEY_ROW3               0x198 0x4a0 0x760 0x0 0x0
+#define MX6SL_PAD_KEY_ROW3__AUD6_RXC               0x198 0x4a0 0x61c 0x1 0x1
+#define MX6SL_PAD_KEY_ROW3__LCD_DATA07             0x198 0x4a0 0x794 0x2 0x0
+#define MX6SL_PAD_KEY_ROW3__EIM_AD07               0x198 0x4a0 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW3__SD4_DATA7              0x198 0x4a0 0x878 0x4 0x1
+#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31             0x198 0x4a0 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT            0x198 0x4a0 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_ROW4__KEY_ROW4               0x19c 0x4a4 0x764 0x0 0x0
+#define MX6SL_PAD_KEY_ROW4__AUD6_TXC               0x19c 0x4a4 0x624 0x1 0x1
+#define MX6SL_PAD_KEY_ROW4__LCD_DATA09             0x19c 0x4a4 0x79c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW4__EIM_AD09               0x19c 0x4a4 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW4__SD4_CMD                0x19c 0x4a4 0x858 0x4 0x2
+#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01             0x19c 0x4a4 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC            0x19c 0x4a4 0x824 0x6 0x1
+#define MX6SL_PAD_KEY_ROW5__KEY_ROW5               0x1a0 0x4a8 0x768 0x0 0x0
+#define MX6SL_PAD_KEY_ROW5__AUD6_TXD               0x1a0 0x4a8 0x618 0x1 0x1
+#define MX6SL_PAD_KEY_ROW5__LCD_DATA11             0x1a0 0x4a8 0x7a4 0x2 0x0
+#define MX6SL_PAD_KEY_ROW5__EIM_AD11               0x1a0 0x4a8 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW5__SD4_DATA1              0x1a0 0x4a8 0x860 0x4 0x2
+#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03             0x1a0 0x4a8 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC            0x1a0 0x4a8 0x820 0x6 0x2
+#define MX6SL_PAD_KEY_ROW6__KEY_ROW6               0x1a4 0x4ac 0x76c 0x0 0x0
+#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA          0x1a4 0x4ac 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA          0x1a4 0x4ac 0x814 0x1 0x3
+#define MX6SL_PAD_KEY_ROW6__LCD_DATA13             0x1a4 0x4ac 0x7ac 0x2 0x0
+#define MX6SL_PAD_KEY_ROW6__EIM_AD13               0x1a4 0x4ac 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW6__SD4_DATA3              0x1a4 0x4ac 0x868 0x4 0x2
+#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05             0x1a4 0x4ac 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT            0x1a4 0x4ac 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_ROW7__KEY_ROW7               0x1a8 0x4b0 0x770 0x0 0x0
+#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B            0x1a8 0x4b0 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B            0x1a8 0x4b0 0x810 0x1 0x3
+#define MX6SL_PAD_KEY_ROW7__LCD_DATA15             0x1a8 0x4b0 0x7b4 0x2 0x0
+#define MX6SL_PAD_KEY_ROW7__EIM_AD15               0x1a8 0x4b0 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW7__SD4_DATA5              0x1a8 0x4b0 0x870 0x4 0x1
+#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07             0x1a8 0x4b0 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW7__SD1_CD_B               0x1a8 0x4b0 0x828 0x6 0x3
+#define MX6SL_PAD_LCD_CLK__LCD_CLK                 0x1ac 0x4b4 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_CLK__SD4_DATA4               0x1ac 0x4b4 0x86c 0x1 0x2
+#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN              0x1ac 0x4b4 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_CLK__EIM_RW                  0x1ac 0x4b4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_CLK__PWM4_OUT                0x1ac 0x4b4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_CLK__GPIO2_IO15              0x1ac 0x4b4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT0__LCD_DATA00             0x1b0 0x4b8 0x778 0x0 0x1
+#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI            0x1b0 0x4b8 0x688 0x1 0x1
+#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID            0x1b0 0x4b8 0x5e0 0x2 0x1
+#define MX6SL_PAD_LCD_DAT0__PWM1_OUT               0x1b0 0x4b8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B            0x1b0 0x4b8 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20             0x1b0 0x4b8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00            0x1b0 0x4b8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00         0x1b0 0x4b8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT1__LCD_DATA01             0x1b4 0x4bc 0x77c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO            0x1b4 0x4bc 0x684 0x1 0x1
+#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID            0x1b4 0x4bc 0x5dc 0x2 0x2
+#define MX6SL_PAD_LCD_DAT1__PWM2_OUT               0x1b4 0x4bc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS              0x1b4 0x4bc 0x5f0 0x4 0x1
+#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21             0x1b4 0x4bc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01            0x1b4 0x4bc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01         0x1b4 0x4bc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT10__LCD_DATA10            0x1b8 0x4c0 0x7a0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT10__KEY_COL1              0x1b8 0x4c0 0x738 0x1 0x1
+#define MX6SL_PAD_LCD_DAT10__CSI_DATA07            0x1b8 0x4c0 0x64c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT10__EIM_DATA04            0x1b8 0x4c0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO           0x1b8 0x4c0 0x6a0 0x4 0x2
+#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30            0x1b8 0x4c0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10           0x1b8 0x4c0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10        0x1b8 0x4c0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT11__LCD_DATA11            0x1bc 0x4c4 0x7a4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT11__KEY_ROW1              0x1bc 0x4c4 0x758 0x1 0x1
+#define MX6SL_PAD_LCD_DAT11__CSI_DATA06            0x1bc 0x4c4 0x648 0x2 0x1
+#define MX6SL_PAD_LCD_DAT11__EIM_DATA05            0x1bc 0x4c4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1            0x1bc 0x4c4 0x6ac 0x4 0x1
+#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31            0x1bc 0x4c4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11           0x1bc 0x4c4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11        0x1bc 0x4c4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT12__LCD_DATA12            0x1c0 0x4c8 0x7a8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT12__KEY_COL2              0x1c0 0x4c8 0x73c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT12__CSI_DATA05            0x1c0 0x4c8 0x644 0x2 0x1
+#define MX6SL_PAD_LCD_DAT12__EIM_DATA06            0x1c0 0x4c8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B           0x1c0 0x4c8 0x818 0x4 0x2
+#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B           0x1c0 0x4c8 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00            0x1c0 0x4c8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12           0x1c0 0x4c8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12        0x1c0 0x4c8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT13__LCD_DATA13            0x1c4 0x4cc 0x7ac 0x0 0x1
+#define MX6SL_PAD_LCD_DAT13__KEY_ROW2              0x1c4 0x4cc 0x75c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT13__CSI_DATA04            0x1c4 0x4cc 0x640 0x2 0x1
+#define MX6SL_PAD_LCD_DAT13__EIM_DATA07            0x1c4 0x4cc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B           0x1c4 0x4cc 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B           0x1c4 0x4cc 0x818 0x4 0x3
+#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01            0x1c4 0x4cc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13           0x1c4 0x4cc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13        0x1c4 0x4cc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT14__LCD_DATA14            0x1c8 0x4d0 0x7b0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT14__KEY_COL3              0x1c8 0x4d0 0x740 0x1 0x1
+#define MX6SL_PAD_LCD_DAT14__CSI_DATA03            0x1c8 0x4d0 0x63c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT14__EIM_DATA08            0x1c8 0x4d0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA         0x1c8 0x4d0 0x81c 0x4 0x2
+#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA         0x1c8 0x4d0 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02            0x1c8 0x4d0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14           0x1c8 0x4d0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14        0x1c8 0x4d0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT15__LCD_DATA15            0x1cc 0x4d4 0x7b4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT15__KEY_ROW3              0x1cc 0x4d4 0x760 0x1 0x1
+#define MX6SL_PAD_LCD_DAT15__CSI_DATA02            0x1cc 0x4d4 0x638 0x2 0x1
+#define MX6SL_PAD_LCD_DAT15__EIM_DATA09            0x1cc 0x4d4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA         0x1cc 0x4d4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA         0x1cc 0x4d4 0x81c 0x4 0x3
+#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03            0x1cc 0x4d4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15           0x1cc 0x4d4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15        0x1cc 0x4d4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT16__LCD_DATA16            0x1d0 0x4d8 0x7b8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT16__KEY_COL4              0x1d0 0x4d8 0x744 0x1 0x1
+#define MX6SL_PAD_LCD_DAT16__CSI_DATA01            0x1d0 0x4d8 0x634 0x2 0x1
+#define MX6SL_PAD_LCD_DAT16__EIM_DATA10            0x1d0 0x4d8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT16__I2C2_SCL              0x1d0 0x4d8 0x724 0x4 0x3
+#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04            0x1d0 0x4d8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16           0x1d0 0x4d8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24        0x1d0 0x4d8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT17__LCD_DATA17            0x1d4 0x4dc 0x7bc 0x0 0x1
+#define MX6SL_PAD_LCD_DAT17__KEY_ROW4              0x1d4 0x4dc 0x764 0x1 0x1
+#define MX6SL_PAD_LCD_DAT17__CSI_DATA00            0x1d4 0x4dc 0x630 0x2 0x1
+#define MX6SL_PAD_LCD_DAT17__EIM_DATA11            0x1d4 0x4dc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT17__I2C2_SDA              0x1d4 0x4dc 0x728 0x4 0x3
+#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05            0x1d4 0x4dc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17           0x1d4 0x4dc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25        0x1d4 0x4dc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT18__LCD_DATA18            0x1d8 0x4e0 0x7c0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT18__KEY_COL5              0x1d8 0x4e0 0x748 0x1 0x1
+#define MX6SL_PAD_LCD_DAT18__CSI_DATA15            0x1d8 0x4e0 0x66c 0x2 0x0
+#define MX6SL_PAD_LCD_DAT18__EIM_DATA12            0x1d8 0x4e0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1          0x1d8 0x4e0 0x710 0x4 0x1
+#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06            0x1d8 0x4e0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18           0x1d8 0x4e0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26        0x1d8 0x4e0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT19__LCD_DATA19            0x1dc 0x4e4 0x7c4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT19__KEY_ROW5              0x1dc 0x4e4 0x768 0x1 0x1
+#define MX6SL_PAD_LCD_DAT19__CSI_DATA14            0x1dc 0x4e4 0x668 0x2 0x0
+#define MX6SL_PAD_LCD_DAT19__EIM_DATA13            0x1dc 0x4e4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2          0x1dc 0x4e4 0x714 0x4 0x1
+#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07            0x1dc 0x4e4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19           0x1dc 0x4e4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27        0x1dc 0x4e4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT2__LCD_DATA02             0x1e0 0x4e8 0x780 0x0 0x1
+#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0             0x1e0 0x4e8 0x68c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT              0x1e0 0x4e8 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT2__PWM3_OUT               0x1e0 0x4e8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT2__AUD4_RXC               0x1e0 0x4e8 0x5ec 0x4 0x1
+#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22             0x1e0 0x4e8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02            0x1e0 0x4e8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02         0x1e0 0x4e8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT20__LCD_DATA20            0x1e4 0x4ec 0x7c8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT20__KEY_COL6              0x1e4 0x4ec 0x74c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT20__CSI_DATA13            0x1e4 0x4ec 0x664 0x2 0x0
+#define MX6SL_PAD_LCD_DAT20__EIM_DATA14            0x1e4 0x4ec 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1          0x1e4 0x4ec 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08            0x1e4 0x4ec 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20           0x1e4 0x4ec 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28        0x1e4 0x4ec 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT21__LCD_DATA21            0x1e8 0x4f0 0x7cc 0x0 0x1
+#define MX6SL_PAD_LCD_DAT21__KEY_ROW6              0x1e8 0x4f0 0x76c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT21__CSI_DATA12            0x1e8 0x4f0 0x660 0x2 0x0
+#define MX6SL_PAD_LCD_DAT21__EIM_DATA15            0x1e8 0x4f0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2          0x1e8 0x4f0 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09            0x1e8 0x4f0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21           0x1e8 0x4f0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29        0x1e8 0x4f0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT22__LCD_DATA22            0x1ec 0x4f4 0x7d0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT22__KEY_COL7              0x1ec 0x4f4 0x750 0x1 0x1
+#define MX6SL_PAD_LCD_DAT22__CSI_DATA11            0x1ec 0x4f4 0x65c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B             0x1ec 0x4f4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3          0x1ec 0x4f4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10            0x1ec 0x4f4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22           0x1ec 0x4f4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30        0x1ec 0x4f4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT23__LCD_DATA23            0x1f0 0x4f8 0x7d4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT23__KEY_ROW7              0x1f0 0x4f8 0x770 0x1 0x1
+#define MX6SL_PAD_LCD_DAT23__CSI_DATA10            0x1f0 0x4f8 0x658 0x2 0x1
+#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B             0x1f0 0x4f8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN             0x1f0 0x4f8 0x718 0x4 0x1
+#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11            0x1f0 0x4f8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23           0x1f0 0x4f8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31        0x1f0 0x4f8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT3__LCD_DATA03             0x1f4 0x4fc 0x784 0x0 0x1
+#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK            0x1f4 0x4fc 0x67c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B            0x1f4 0x4fc 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT3__PWM4_OUT               0x1f4 0x4fc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT3__AUD4_RXD               0x1f4 0x4fc 0x5e4 0x4 0x1
+#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23             0x1f4 0x4fc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03            0x1f4 0x4fc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03         0x1f4 0x4fc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT4__LCD_DATA04             0x1f8 0x500 0x788 0x0 0x1
+#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1             0x1f8 0x500 0x690 0x1 0x1
+#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC              0x1f8 0x500 0x678 0x2 0x2
+#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB      0x1f8 0x500 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT4__AUD4_TXC               0x1f8 0x500 0x5f4 0x4 0x1
+#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24             0x1f8 0x500 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04            0x1f8 0x500 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04         0x1f8 0x500 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT5__LCD_DATA05             0x1fc 0x504 0x78c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2             0x1fc 0x504 0x694 0x1 0x1
+#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC              0x1fc 0x504 0x670 0x2 0x2
+#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B              0x1fc 0x504 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS              0x1fc 0x504 0x5f8 0x4 0x1
+#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25             0x1fc 0x504 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05            0x1fc 0x504 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05         0x1fc 0x504 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT6__LCD_DATA06             0x200 0x508 0x790 0x0 0x1
+#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3             0x200 0x508 0x698 0x1 0x1
+#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK             0x200 0x508 0x674 0x2 0x2
+#define MX6SL_PAD_LCD_DAT6__EIM_DATA00             0x200 0x508 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT6__AUD4_TXD               0x200 0x508 0x5e8 0x4 0x1
+#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26             0x200 0x508 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06            0x200 0x508 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06         0x200 0x508 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT7__LCD_DATA07             0x204 0x50c 0x794 0x0 0x1
+#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY             0x204 0x50c 0x680 0x1 0x1
+#define MX6SL_PAD_LCD_DAT7__CSI_MCLK               0x204 0x50c 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT7__EIM_DATA01             0x204 0x50c 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT          0x204 0x50c 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27             0x204 0x50c 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07            0x204 0x50c 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07         0x204 0x50c 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT8__LCD_DATA08             0x208 0x510 0x798 0x0 0x1
+#define MX6SL_PAD_LCD_DAT8__KEY_COL0               0x208 0x510 0x734 0x1 0x1
+#define MX6SL_PAD_LCD_DAT8__CSI_DATA09             0x208 0x510 0x654 0x2 0x1
+#define MX6SL_PAD_LCD_DAT8__EIM_DATA02             0x208 0x510 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK            0x208 0x510 0x69c 0x4 0x2
+#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28             0x208 0x510 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08            0x208 0x510 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08         0x208 0x510 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT9__LCD_DATA09             0x20c 0x514 0x79c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT9__KEY_ROW0               0x20c 0x514 0x754 0x1 0x1
+#define MX6SL_PAD_LCD_DAT9__CSI_DATA08             0x20c 0x514 0x650 0x2 0x1
+#define MX6SL_PAD_LCD_DAT9__EIM_DATA03             0x20c 0x514 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI            0x20c 0x514 0x6a4 0x4 0x2
+#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29             0x20c 0x514 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09            0x20c 0x514 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09         0x20c 0x514 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE           0x210 0x518 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5            0x210 0x518 0x870 0x1 0x2
+#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E             0x210 0x518 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B             0x210 0x518 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA        0x210 0x518 0x804 0x4 0x2
+#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA        0x210 0x518 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16           0x210 0x518 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC             0x214 0x51c 0x774 0x0 0x0
+#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6             0x214 0x51c 0x874 0x1 0x2
+#define MX6SL_PAD_LCD_HSYNC__LCD_CS                0x214 0x51c 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B             0x214 0x51c 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA         0x214 0x51c 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA         0x214 0x51c 0x804 0x4 0x3
+#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17            0x214 0x51c 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK         0x214 0x51c 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_RESET__LCD_RESET             0x218 0x520 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B           0x218 0x520 0x880 0x1 0x1
+#define MX6SL_PAD_LCD_RESET__LCD_BUSY              0x218 0x520 0x774 0x2 0x1
+#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B            0x218 0x520 0x884 0x3 0x1
+#define MX6SL_PAD_LCD_RESET__UART2_CTS_B           0x218 0x520 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_RESET__UART2_RTS_B           0x218 0x520 0x800 0x4 0x2
+#define MX6SL_PAD_LCD_RESET__GPIO2_IO19            0x218 0x520 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY        0x218 0x520 0x62c 0x6 0x1
+#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC             0x21c 0x524 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7             0x21c 0x524 0x878 0x1 0x2
+#define MX6SL_PAD_LCD_VSYNC__LCD_RS                0x21c 0x524 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B             0x21c 0x524 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B           0x21c 0x524 0x800 0x4 0x3
+#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B           0x21c 0x524 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18            0x21c 0x524 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL         0x21c 0x524 0x000 0x6 0x0
+#define MX6SL_PAD_PWM1__PWM1_OUT                   0x220 0x528 0x000 0x0 0x0
+#define MX6SL_PAD_PWM1__CCM_CLKO                   0x220 0x528 0x000 0x1 0x0
+#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT              0x220 0x528 0x000 0x2 0x0
+#define MX6SL_PAD_PWM1__FEC_REF_OUT                0x220 0x528 0x000 0x3 0x0
+#define MX6SL_PAD_PWM1__CSI_MCLK                   0x220 0x528 0x000 0x4 0x0
+#define MX6SL_PAD_PWM1__GPIO3_IO23                 0x220 0x528 0x000 0x5 0x0
+#define MX6SL_PAD_PWM1__EPIT1_OUT                  0x220 0x528 0x000 0x6 0x0
+#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0
+#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL            0x224 0x52c 0x72c 0x1 0x2
+#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT            0x224 0x52c 0x000 0x2 0x0
+#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID         0x224 0x52c 0x5e0 0x3 0x2
+#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY      0x224 0x52c 0x62c 0x4 0x2
+#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21          0x224 0x52c 0x000 0x5 0x0
+#define MX6SL_PAD_REF_CLK_24M__SD3_WP              0x224 0x52c 0x84c 0x6 0x3
+#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0
+#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA            0x228 0x530 0x730 0x1 0x2
+#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT            0x228 0x530 0x000 0x2 0x0
+#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID         0x228 0x530 0x5dc 0x3 0x3
+#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL            0x228 0x530 0x000 0x4 0x0
+#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22          0x228 0x530 0x000 0x5 0x0
+#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B            0x228 0x530 0x838 0x6 0x3
+#define MX6SL_PAD_SD1_CLK__SD1_CLK                 0x22c 0x534 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_CLK__FEC_MDIO                0x22c 0x534 0x6f4 0x1 0x2
+#define MX6SL_PAD_SD1_CLK__KEY_COL0                0x22c 0x534 0x734 0x2 0x2
+#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4              0x22c 0x534 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_CLK__GPIO5_IO15              0x22c 0x534 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_CMD__SD1_CMD                 0x230 0x538 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK              0x230 0x538 0x70c 0x1 0x2
+#define MX6SL_PAD_SD1_CMD__KEY_ROW0                0x230 0x538 0x754 0x2 0x2
+#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5              0x230 0x538 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_CMD__GPIO5_IO14              0x230 0x538 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT0__SD1_DATA0              0x234 0x53c 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER              0x234 0x53c 0x708 0x1 0x2
+#define MX6SL_PAD_SD1_DAT0__KEY_COL1               0x234 0x53c 0x738 0x2 0x2
+#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6             0x234 0x53c 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11             0x234 0x53c 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT1__SD1_DATA1              0x238 0x540 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV              0x238 0x540 0x704 0x1 0x2
+#define MX6SL_PAD_SD1_DAT1__KEY_ROW1               0x238 0x540 0x758 0x2 0x2
+#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7             0x238 0x540 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08             0x238 0x540 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT2__SD1_DATA2              0x23c 0x544 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1           0x23c 0x544 0x6fc 0x1 0x2
+#define MX6SL_PAD_SD1_DAT2__KEY_COL2               0x23c 0x544 0x73c 0x2 0x2
+#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8             0x23c 0x544 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13             0x23c 0x544 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT3__SD1_DATA3              0x240 0x548 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0           0x240 0x548 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT3__KEY_ROW2               0x240 0x548 0x75c 0x2 0x2
+#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9             0x240 0x548 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06             0x240 0x548 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT4__SD1_DATA4              0x244 0x54c 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT4__FEC_MDC                0x244 0x54c 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT4__KEY_COL3               0x244 0x54c 0x740 0x2 0x2
+#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N           0x244 0x54c 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA          0x244 0x54c 0x814 0x4 0x4
+#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA          0x244 0x54c 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12             0x244 0x54c 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT5__SD1_DATA5              0x248 0x550 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0           0x248 0x550 0x6f8 0x1 0x2
+#define MX6SL_PAD_SD1_DAT5__KEY_ROW3               0x248 0x550 0x760 0x2 0x2
+#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED             0x248 0x550 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA          0x248 0x550 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA          0x248 0x550 0x814 0x4 0x5
+#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09             0x248 0x550 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT6__SD1_DATA6              0x24c 0x554 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN              0x24c 0x554 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT6__KEY_COL4               0x24c 0x554 0x744 0x2 0x2
+#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ             0x24c 0x554 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B            0x24c 0x554 0x810 0x4 0x4
+#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B            0x24c 0x554 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07             0x24c 0x554 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT7__SD1_DATA7              0x250 0x558 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1           0x250 0x558 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT7__KEY_ROW4               0x250 0x558 0x764 0x2 0x2
+#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY         0x250 0x558 0x62c 0x3 0x3
+#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B            0x250 0x558 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B            0x250 0x558 0x810 0x4 0x5
+#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10             0x250 0x558 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_CLK__SD2_CLK                 0x254 0x55c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_CLK__AUD4_RXFS               0x254 0x55c 0x5f0 0x1 0x2
+#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK             0x254 0x55c 0x6b0 0x2 0x2
+#define MX6SL_PAD_SD2_CLK__CSI_DATA00              0x254 0x55c 0x630 0x3 0x2
+#define MX6SL_PAD_SD2_CLK__GPIO5_IO05              0x254 0x55c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_CMD__SD2_CMD                 0x258 0x560 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_CMD__AUD4_RXC                0x258 0x560 0x5ec 0x1 0x2
+#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0              0x258 0x560 0x6c0 0x2 0x2
+#define MX6SL_PAD_SD2_CMD__CSI_DATA01              0x258 0x560 0x634 0x3 0x2
+#define MX6SL_PAD_SD2_CMD__EPIT1_OUT               0x258 0x560 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_CMD__GPIO5_IO04              0x258 0x560 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT0__SD2_DATA0              0x25c 0x564 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT0__AUD4_RXD               0x25c 0x564 0x5e4 0x1 0x2
+#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI            0x25c 0x564 0x6bc 0x2 0x2
+#define MX6SL_PAD_SD2_DAT0__CSI_DATA02             0x25c 0x564 0x638 0x3 0x2
+#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B            0x25c 0x564 0x818 0x4 0x4
+#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B            0x25c 0x564 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01             0x25c 0x564 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT1__SD2_DATA1              0x260 0x568 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT1__AUD4_TXC               0x260 0x568 0x5f4 0x1 0x2
+#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO            0x260 0x568 0x6b8 0x2 0x2
+#define MX6SL_PAD_SD2_DAT1__CSI_DATA03             0x260 0x568 0x63c 0x3 0x2
+#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B            0x260 0x568 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B            0x260 0x568 0x818 0x4 0x5
+#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30             0x260 0x568 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT2__SD2_DATA2              0x264 0x56c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS              0x264 0x56c 0x5f8 0x1 0x2
+#define MX6SL_PAD_SD2_DAT2__FEC_COL                0x264 0x56c 0x6f0 0x2 0x1
+#define MX6SL_PAD_SD2_DAT2__CSI_DATA04             0x264 0x56c 0x640 0x3 0x2
+#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA          0x264 0x56c 0x81c 0x4 0x4
+#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA          0x264 0x56c 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03             0x264 0x56c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT3__SD2_DATA3              0x268 0x570 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT3__AUD4_TXD               0x268 0x570 0x5e8 0x1 0x2
+#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK             0x268 0x570 0x700 0x2 0x1
+#define MX6SL_PAD_SD2_DAT3__CSI_DATA05             0x268 0x570 0x644 0x3 0x2
+#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA          0x268 0x570 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA          0x268 0x570 0x81c 0x4 0x5
+#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28             0x268 0x570 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT4__SD2_DATA4              0x26c 0x574 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT4__SD3_DATA4              0x26c 0x574 0x83c 0x1 0x1
+#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA          0x26c 0x574 0x804 0x2 0x4
+#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA          0x26c 0x574 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT4__CSI_DATA06             0x26c 0x574 0x648 0x3 0x2
+#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT              0x26c 0x574 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02             0x26c 0x574 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT5__SD2_DATA5              0x270 0x578 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT5__SD3_DATA5              0x270 0x578 0x840 0x1 0x1
+#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA          0x270 0x578 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA          0x270 0x578 0x804 0x2 0x5
+#define MX6SL_PAD_SD2_DAT5__CSI_DATA07             0x270 0x578 0x64c 0x3 0x2
+#define MX6SL_PAD_SD2_DAT5__SPDIF_IN               0x270 0x578 0x7f0 0x4 0x2
+#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31             0x270 0x578 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT6__SD2_DATA6              0x274 0x57c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT6__SD3_DATA6              0x274 0x57c 0x844 0x1 0x1
+#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B            0x274 0x57c 0x800 0x2 0x4
+#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B            0x274 0x57c 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT6__CSI_DATA08             0x274 0x57c 0x650 0x3 0x2
+#define MX6SL_PAD_SD2_DAT6__SD2_WP                 0x274 0x57c 0x834 0x4 0x2
+#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29             0x274 0x57c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT7__SD2_DATA7              0x278 0x580 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT7__SD3_DATA7              0x278 0x580 0x848 0x1 0x1
+#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B            0x278 0x580 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B            0x278 0x580 0x800 0x2 0x5
+#define MX6SL_PAD_SD2_DAT7__CSI_DATA09             0x278 0x580 0x654 0x3 0x2
+#define MX6SL_PAD_SD2_DAT7__SD2_CD_B               0x278 0x580 0x830 0x4 0x2
+#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00             0x278 0x580 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_RST__SD2_RESET               0x27c 0x584 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_RST__FEC_REF_OUT             0x27c 0x584 0x000 0x1 0x0
+#define MX6SL_PAD_SD2_RST__WDOG2_B                 0x27c 0x584 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_RST__SPDIF_OUT               0x27c 0x584 0x000 0x3 0x0
+#define MX6SL_PAD_SD2_RST__CSI_MCLK                0x27c 0x584 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_RST__GPIO4_IO27              0x27c 0x584 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CLK__SD3_CLK                 0x280 0x588 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_CLK__AUD5_RXFS               0x280 0x588 0x608 0x1 0x1
+#define MX6SL_PAD_SD3_CLK__KEY_COL5                0x280 0x588 0x748 0x2 0x2
+#define MX6SL_PAD_SD3_CLK__CSI_DATA10              0x280 0x588 0x658 0x3 0x2
+#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB       0x280 0x588 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_CLK__GPIO5_IO18              0x280 0x588 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR            0x280 0x588 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_CMD__SD3_CMD                 0x284 0x58c 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_CMD__AUD5_RXC                0x284 0x58c 0x604 0x1 0x1
+#define MX6SL_PAD_SD3_CMD__KEY_ROW5                0x284 0x58c 0x768 0x2 0x2
+#define MX6SL_PAD_SD3_CMD__CSI_DATA11              0x284 0x58c 0x65c 0x3 0x2
+#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID             0x284 0x58c 0x5e0 0x4 0x3
+#define MX6SL_PAD_SD3_CMD__GPIO5_IO21              0x284 0x58c 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR            0x284 0x58c 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_DAT0__SD3_DATA0              0x288 0x590 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT0__AUD5_RXD               0x288 0x590 0x5fc 0x1 0x1
+#define MX6SL_PAD_SD3_DAT0__KEY_COL6               0x288 0x590 0x74c 0x2 0x2
+#define MX6SL_PAD_SD3_DAT0__CSI_DATA12             0x288 0x590 0x660 0x3 0x1
+#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID            0x288 0x590 0x5dc 0x4 0x4
+#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19             0x288 0x590 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT1__SD3_DATA1              0x28c 0x594 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT1__AUD5_TXC               0x28c 0x594 0x60c 0x1 0x1
+#define MX6SL_PAD_SD3_DAT1__KEY_ROW6               0x28c 0x594 0x76c 0x2 0x2
+#define MX6SL_PAD_SD3_DAT1__CSI_DATA13             0x28c 0x594 0x664 0x3 0x1
+#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT            0x28c 0x594 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20             0x28c 0x594 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B              0x28c 0x594 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_DAT2__SD3_DATA2              0x290 0x598 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS              0x290 0x598 0x610 0x1 0x1
+#define MX6SL_PAD_SD3_DAT2__KEY_COL7               0x290 0x598 0x750 0x2 0x2
+#define MX6SL_PAD_SD3_DAT2__CSI_DATA14             0x290 0x598 0x668 0x3 0x1
+#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT              0x290 0x598 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16             0x290 0x598 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC            0x290 0x598 0x820 0x6 0x3
+#define MX6SL_PAD_SD3_DAT3__SD3_DATA3              0x294 0x59c 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT3__AUD5_TXD               0x294 0x59c 0x600 0x1 0x1
+#define MX6SL_PAD_SD3_DAT3__KEY_ROW7               0x294 0x59c 0x770 0x2 0x2
+#define MX6SL_PAD_SD3_DAT3__CSI_DATA15             0x294 0x59c 0x66c 0x3 0x1
+#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT              0x294 0x59c 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17             0x294 0x59c 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC            0x294 0x59c 0x824 0x6 0x2
+#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA         0x298 0x5a0 0x7fc 0x0 0x0
+#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA         0x298 0x5a0 0x000 0x0 0x0
+#define MX6SL_PAD_UART1_RXD__PWM1_OUT              0x298 0x5a0 0x000 0x1 0x0
+#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA         0x298 0x5a0 0x814 0x2 0x6
+#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA         0x298 0x5a0 0x000 0x2 0x0
+#define MX6SL_PAD_UART1_RXD__FEC_COL               0x298 0x5a0 0x6f0 0x3 0x2
+#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA         0x298 0x5a0 0x81c 0x4 0x6
+#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA         0x298 0x5a0 0x000 0x4 0x0
+#define MX6SL_PAD_UART1_RXD__GPIO3_IO16            0x298 0x5a0 0x000 0x5 0x0
+#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA         0x29c 0x5a4 0x000 0x0 0x0
+#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA         0x29c 0x5a4 0x7fc 0x0 0x1
+#define MX6SL_PAD_UART1_TXD__PWM2_OUT              0x29c 0x5a4 0x000 0x1 0x0
+#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA         0x29c 0x5a4 0x000 0x2 0x0
+#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA         0x29c 0x5a4 0x814 0x2 0x7
+#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK            0x29c 0x5a4 0x700 0x3 0x2
+#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA         0x29c 0x5a4 0x000 0x4 0x0
+#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA         0x29c 0x5a4 0x81c 0x4 0x7
+#define MX6SL_PAD_UART1_TXD__GPIO3_IO17            0x29c 0x5a4 0x000 0x5 0x0
+#define MX6SL_PAD_UART1_TXD__UART5_DCD_B           0x29c 0x5a4 0x000 0x7 0x0
+#define MX6SL_PAD_WDOG_B__WDOG1_B                  0x2a0 0x5a8 0x000 0x0 0x0
+#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB        0x2a0 0x5a8 0x000 0x1 0x0
+#define MX6SL_PAD_WDOG_B__UART5_RI_B               0x2a0 0x5a8 0x000 0x2 0x0
+#define MX6SL_PAD_WDOG_B__GPIO3_IO18               0x2a0 0x5a8 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6SL_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx6sl.dtsi b/roms/u-boot/arch/arm/dts/imx6sl.dtsi
new file mode 100644
index 000000000..cc9572ea2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sl.dtsi
@@ -0,0 +1,927 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6sl-pinfunc.h"
+#include <dt-bindings/clock/imx6sl-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1275000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1225000
+				792000          1175000
+				396000          1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
+					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
+					<&clks IMX6SL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks IMX6SL_CLK_OCRAM>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@02004000 {
+					compatible = "fsl,imx6sl-spdif",
+						"fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+						<&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
+						 <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						"rxtx1", "rxtx2",
+						"rxtx3", "rxtx4",
+						"rxtx5", "rxtx6",
+						"rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI1>,
+						 <&clks IMX6SL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI2>,
+						 <&clks IMX6SL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI3>,
+						 <&clks IMX6SL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI4>,
+						 <&clks IMX6SL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart5: serial@02018000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@02024000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@02028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI1_IPG>,
+						 <&clks IMX6SL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@0202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI2_IPG>,
+						 <&clks IMX6SL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@02030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI3_IPG>,
+						 <&clks IMX6SL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				uart3: serial@02034000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart4: serial@02038000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02038000 0x4000>;
+					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@02080000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PWM1>,
+					 <&clks IMX6SL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm2: pwm@02084000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PWM2>,
+					 <&clks IMX6SL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm3: pwm@02088000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PWM3>,
+					 <&clks IMX6SL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm4: pwm@0208c000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PWM4>,
+					 <&clks IMX6SL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt: gpt@02098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_GPT>,
+					 <&clks IMX6SL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 22 1>, <&iomuxc  1 20 2>,
+					      <&iomuxc  3 23 1>, <&iomuxc  4 25 1>,
+					      <&iomuxc  5 24 1>, <&iomuxc  6 19 1>,
+					      <&iomuxc  7 36 2>, <&iomuxc  9 44 8>,
+					      <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
+					      <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  53 3>, <&iomuxc  3  72 2>,
+					      <&iomuxc  5  34 2>, <&iomuxc  7  57 4>,
+					      <&iomuxc 11  56 1>, <&iomuxc 12  61 3>,
+					      <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
+					      <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
+					      <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
+					      <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 112 8>, <&iomuxc  8 121 4>,
+					      <&iomuxc 12  97 4>, <&iomuxc 16 166 3>,
+					      <&iomuxc 19  85 2>, <&iomuxc 21 137 2>,
+					      <&iomuxc 23 136 1>, <&iomuxc 24  91 1>,
+					      <&iomuxc 25  99 1>, <&iomuxc 26  92 1>,
+					      <&iomuxc 27 100 1>, <&iomuxc 28  93 1>,
+					      <&iomuxc 29 101 1>, <&iomuxc 30  94 1>,
+					      <&iomuxc 31 102 1>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  95 1>, <&iomuxc  1 103 1>,
+					      <&iomuxc  2  96 1>, <&iomuxc  3 104 1>,
+					      <&iomuxc  4  97 1>, <&iomuxc  5 105 1>,
+					      <&iomuxc  6  98 1>, <&iomuxc  7 106 1>,
+					      <&iomuxc  8  28 1>, <&iomuxc  9  27 1>,
+					      <&iomuxc 10  26 1>, <&iomuxc 11  29 1>,
+					      <&iomuxc 12  32 1>, <&iomuxc 13  31 1>,
+					      <&iomuxc 14  30 1>, <&iomuxc 15  33 1>,
+					      <&iomuxc 16  84 1>, <&iomuxc 17  79 2>,
+					      <&iomuxc 19  78 1>, <&iomuxc 20  76 1>,
+					      <&iomuxc 21  81 2>, <&iomuxc 23  75 1>,
+					      <&iomuxc 24  83 1>, <&iomuxc 25  74 1>,
+					      <&iomuxc 26  77 1>, <&iomuxc 27 159 1>,
+					      <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
+					      <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 158 1>, <&iomuxc  1 151 1>,
+					      <&iomuxc  2 155 1>, <&iomuxc  3 153 1>,
+					      <&iomuxc  4 150 1>, <&iomuxc  5 149 1>,
+					      <&iomuxc  6 144 1>, <&iomuxc  7 147 1>,
+					      <&iomuxc  8 142 1>, <&iomuxc  9 146 1>,
+					      <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
+					      <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
+					      <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
+					      <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
+					      <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
+					      <&iomuxc 21 161 1>;
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6sl-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6sl-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1375000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+				};
+
+				regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+				};
+
+				regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2850000>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			tempmon: tempmon {
+				compatible = "fsl,imx6q-tempmon";
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+				clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6sl-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				pu-supply = <&reg_pu>;
+				clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+					 <&clks IMX6SL_CLK_GPU2D_PODF>;
+				#power-domain-cells = <1>;
+			};
+
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6sl-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6sl-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			csi: csi@020e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spdc: spdc@020e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_SDMA>,
+					 <&clks IMX6SL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				/* imx6sl reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@020f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epdc: epdc@020f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			lcdif: lcdif@020f8000 {
+				compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SL_CLK_LCDIF_AXI>,
+					 <&clks IMX6SL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: dcp@020fc000 {
+				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 101 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh: usb@02184400 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+			};
+
+			fec: ethernet@02188000 {
+				compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_ENET>,
+					 <&clks IMX6SL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC1>,
+					 <&clks IMX6SL_CLK_USDHC1>,
+					 <&clks IMX6SL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC2>,
+					 <&clks IMX6SL_CLK_USDHC2>,
+					 <&clks IMX6SL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@02198000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC3>,
+					 <&clks IMX6SL_CLK_USDHC3>,
+					 <&clks IMX6SL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: usdhc@0219c000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC4>,
+					 <&clks IMX6SL_CLK_USDHC4>,
+					 <&clks IMX6SL_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			rngb: rngb@021b4000 {
+				reg = <0x021b4000 0x4000>;
+				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@021bc000 {
+				compatible = "fsl,imx6sl-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SL_CLK_OCOTP>;
+			};
+
+			audmux: audmux@021d8000 {
+				compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sll-evk.dts b/roms/u-boot/arch/arm/dts/imx6sll-evk.dts
new file mode 100644
index 000000000..b4af007c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sll-evk.dts
@@ -0,0 +1,801 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	battery: max8903@0 {
+		compatible = "fsl,max8903-charger";
+		pinctrl-names = "default";
+		dok_input = <&gpio4 13 1>;
+		uok_input = <&gpio4 13 1>;
+		chg_input = <&gpio4 15 1>;
+		flt_input = <&gpio4 14 1>;
+		fsl,dcm_always_high;
+		fsl,dc_valid;
+		fsl,adc_disable;
+		status = "okay";
+	};
+
+	pxp_v4l2_out {
+		compatible = "fsl,imx6sl-pxp-v4l2";
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_aud3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply-3v15";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-boot-on;
+		};
+
+		reg_aud4v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "wm8962-supply-4v2";
+			regulator-min-microvolt = <4325000>;
+			regulator-max-microvolt = <4325000>;
+			regulator-boot-on;
+		};
+
+		reg_lcd: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "lcd-pwr";
+			gpio = <&gpio4 8 0>;
+			enable-active-high;
+		};
+
+		reg_sd1_vmmc: sd1_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "SD1_SPWR";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_sd2_vmmc: sd2_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "eMMC-VCCQ";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		reg_sd3_vmmc: sd3_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "SD3_WIFI";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		cpu-dai = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		codec-master;
+		hp-det-gpios = <&gpio4 24 1>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	max17135: max17135@48 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_max17135>;
+		compatible = "maxim,max17135";
+		reg = <0x48>;
+		status = "okay";
+
+		vneg_pwrup = <1>;
+		gvee_pwrup = <2>;
+		vpos_pwrup = <10>;
+		gvdd_pwrup = <12>;
+		gvdd_pwrdn = <1>;
+		vpos_pwrdn = <2>;
+		gvee_pwrdn = <8>;
+		vneg_pwrdn = <10>;
+		gpio_pmic_pwrgood = <&gpio2 13 0>;
+		gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
+		gpio_pmic_wakeup = <&gpio2 14 0>;
+		gpio_pmic_v3p3 = <&gpio2 7 0>;
+		gpio_pmic_intr = <&gpio2 12 0>;
+
+		regulators {
+			DISPLAY_reg: DISPLAY {
+				regulator-name = "DISPLAY";
+			};
+
+			GVDD_reg: GVDD {
+				/* 20v */
+				regulator-name = "GVDD";
+			};
+
+			GVEE_reg: GVEE {
+				/* -22v */
+				regulator-name = "GVEE";
+			};
+
+			HVINN_reg: HVINN {
+				/* -22v */
+				regulator-name = "HVINN";
+			};
+
+			HVINP_reg: HVINP {
+				/* 20v */
+				regulator-name = "HVINP";
+			};
+
+			VCOM_reg: VCOM {
+				regulator-name = "VCOM";
+				/* 2's-compliment, -4325000 */
+				regulator-min-microvolt = <0xffbe0178>;
+				/* 2's-compliment, -500000 */
+				regulator-max-microvolt = <0xfff85ee0>;
+			};
+
+			VNEG_reg: VNEG {
+				/* -15v */
+				regulator-name = "VNEG";
+			};
+
+			VPOS_reg: VPOS {
+				/* 15v */
+				regulator-name = "VPOS";
+			};
+
+			V3P3_reg: V3P3 {
+				regulator-name = "V3P3";
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+		amic-mono;
+	};
+};
+
+&gpc {
+	fsl,ldo-bypass = <1>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6sll-evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
+				MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059
+				MX6SLL_PAD_KEY_COL3__GPIO3_IO30	0x17059
+				/*
+				 * Must set the LVE of pad SD2_RESET, otherwise current
+				 * leakage through eMMC chip will pull high the VCCQ to
+				 * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch.
+				 */
+				MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059
+				MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+				MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */
+				MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */
+				MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+				MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+				/* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */
+				MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
+				MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
+				MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15  0x17000
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SLL_PAD_AUD_TXC__AUD3_TXC		0x4130b0
+				MX6SLL_PAD_AUD_TXFS__AUD3_TXFS		0x4130b0
+				MX6SLL_PAD_AUD_TXD__AUD3_TXD		0x4110b0
+				MX6SLL_PAD_AUD_RXD__AUD3_RXD		0x4130b0
+				MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT	0x4130b0
+			>;
+		};
+
+		pinctrl_csi1: csi1grp {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_GDRL__CSI_MCLK		0x1b088
+				MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK	0x1b088
+				MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC		0x1b088
+				MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC		0x1b088
+				MX6SLL_PAD_EPDC_DATA02__CSI_DATA02	0x1b088
+				MX6SLL_PAD_EPDC_DATA03__CSI_DATA03	0x1b088
+				MX6SLL_PAD_EPDC_DATA04__CSI_DATA04	0x1b088
+				MX6SLL_PAD_EPDC_DATA05__CSI_DATA05	0x1b088
+				MX6SLL_PAD_EPDC_DATA06__CSI_DATA06	0x1b088
+				MX6SLL_PAD_EPDC_DATA07__CSI_DATA07	0x1b088
+				MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08	0x1b088
+				MX6SLL_PAD_EPDC_SDLE__CSI_DATA09	0x1b088
+				MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26	0x80000000
+				MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25	0x80000000
+			>;
+		};
+
+                pinctrl_epdc0: epdcgrp0 {
+                        fsl,pins = <
+				MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00	0x100b1
+				MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01	0x100b1
+				MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02	0x100b1
+				MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03	0x100b1
+				MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04	0x100b1
+				MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05	0x100b1
+				MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06	0x100b1
+				MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07	0x100b1
+				MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08	0x100b1
+				MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09	0x100b1
+				MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10	0x100b1
+				MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11	0x100b1
+				MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12	0x100b1
+				MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13	0x100b1
+				MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14	0x100b1
+				MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15	0x100b1
+				MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P	0x100b1
+				MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE		0x100b1
+				MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE		0x100b1
+				MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR	0x100b1
+				MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0	0x100b1
+				MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK	0x100b1
+				MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE		0x100b1
+				MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL		0x100b1
+				MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP		0x100b1
+                       >;
+                };
+
+		pinctrl_lcdif_dat: lcdifdatgrp {
+			fsl,pins = <
+				MX6SLL_PAD_LCD_DATA00__LCD_DATA00	0x79
+				MX6SLL_PAD_LCD_DATA01__LCD_DATA01	0x79
+				MX6SLL_PAD_LCD_DATA02__LCD_DATA02	0x79
+				MX6SLL_PAD_LCD_DATA03__LCD_DATA03	0x79
+				MX6SLL_PAD_LCD_DATA04__LCD_DATA04	0x79
+				MX6SLL_PAD_LCD_DATA05__LCD_DATA05	0x79
+				MX6SLL_PAD_LCD_DATA06__LCD_DATA06	0x79
+				MX6SLL_PAD_LCD_DATA07__LCD_DATA07	0x79
+				MX6SLL_PAD_LCD_DATA08__LCD_DATA08	0x79
+				MX6SLL_PAD_LCD_DATA09__LCD_DATA09	0x79
+				MX6SLL_PAD_LCD_DATA10__LCD_DATA10	0x79
+				MX6SLL_PAD_LCD_DATA11__LCD_DATA11	0x79
+				MX6SLL_PAD_LCD_DATA12__LCD_DATA12	0x79
+				MX6SLL_PAD_LCD_DATA13__LCD_DATA13	0x79
+				MX6SLL_PAD_LCD_DATA14__LCD_DATA14	0x79
+				MX6SLL_PAD_LCD_DATA15__LCD_DATA15	0x79
+				MX6SLL_PAD_LCD_DATA16__LCD_DATA16	0x79
+				MX6SLL_PAD_LCD_DATA17__LCD_DATA17	0x79
+				MX6SLL_PAD_LCD_DATA18__LCD_DATA18	0x79
+				MX6SLL_PAD_LCD_DATA19__LCD_DATA19	0x79
+				MX6SLL_PAD_LCD_DATA20__LCD_DATA20	0x79
+				MX6SLL_PAD_LCD_DATA21__LCD_DATA21	0x79
+				MX6SLL_PAD_LCD_DATA22__LCD_DATA22	0x79
+				MX6SLL_PAD_LCD_DATA23__LCD_DATA23	0x79
+			>;
+		};
+
+		pinctrl_lcdif_ctrl: lcdifctrlgrp {
+			fsl,pins = <
+				MX6SLL_PAD_LCD_CLK__LCD_CLK		0x79
+				MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE	0x79
+				MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+				MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+				MX6SLL_PAD_LCD_RESET__LCD_RESET		0x79
+				MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08	0x79
+			>;
+		};
+
+		pinctrl_max17135: max17135grp-1 {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13	0x80000000  /* pwrgood */
+				MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03	0x80000000  /* vcom_ctrl */
+				MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14	0x80000000  /* wakeup */
+				MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07	0x80000000  /* v3p3 */
+				MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12	0x80000000  /* pwr int */
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+				MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x1b0b1  /* bt reg on */
+				MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x1b0b1
+				MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5dte: uart5dtegrp {
+			fsl,pins = <
+				MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x1b0b1
+				MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x17059
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x17059
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x17059
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x17059
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x17059
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x413059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x170b9
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170b9
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170b9
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170b9
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170b9
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x4130b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x170f9
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170f9
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170f9
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170f9
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170f9
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x4130f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x17059
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x13059
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x17059
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x17059
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x17059
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x130b9
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x130f9
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
+				MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SLL_PAD_AUD_RXFS__I2C3_SCL  0x4041b8b1
+				MX6SLL_PAD_AUD_RXC__I2C3_SDA   0x4041b8b1
+			>;
+		};
+
+		pinctrl_pwm1: pmw1grp {
+			fsl,pins = <
+				MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
+			>;
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display>;
+	status = "okay";
+
+	display: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <89>;
+				hfront-porch = <164>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pxp {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart5dte>; */
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vqmmc-supply = <&reg_sd2_vmmc>;
+	bus-width = <8>;
+	no-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd3_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&epdc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epdc0>;
+	V3P3-supply = <&V3P3_reg>;
+	VCOM-supply = <&VCOM_reg>;
+	DISPLAY-supply = <&DISPLAY_reg>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sll-pinfunc.h b/roms/u-boot/arch/arm/dts/imx6sll-pinfunc.h
new file mode 100644
index 000000000..5a3700b0a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sll-pinfunc.h
@@ -0,0 +1,882 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SLL_PINFUNC_H
+#define __DTS_IMX6SLL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SLL_PAD_WDOG_B__WDOG1_B                                0x0014 0x02DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB                      0x0014 0x02DC 0x0000 0x1 0x0
+#define MX6SLL_PAD_WDOG_B__UART5_RI_B                             0x0014 0x02DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_WDOG_B__GPIO3_IO18                             0x0014 0x02DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M               0x0018 0x02E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL                          0x0018 0x02E0 0x068C 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT                          0x0018 0x02E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID                       0x0018 0x02E0 0x0560 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY                    0x0018 0x02E0 0x05AC 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21                        0x0018 0x02E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__SD3_WP                            0x0018 0x02E0 0x0794 0x6 0x0
+#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K               0x001C 0x02E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA                          0x001C 0x02E4 0x0690 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT                          0x001C 0x02E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID                       0x001C 0x02E4 0x055C 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL                          0x001C 0x02E4 0x0000 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22                        0x001C 0x02E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B                          0x001C 0x02E4 0x0780 0x6 0x0
+#define MX6SLL_PAD_PWM1__PWM1_OUT                                 0x0020 0x02E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_PWM1__CCM_CLKO                                 0x0020 0x02E8 0x0000 0x1 0x0
+#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT                            0x0020 0x02E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_PWM1__CSI_MCLK                                 0x0020 0x02E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_PWM1__GPIO3_IO23                               0x0020 0x02E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_PWM1__EPIT1_OUT                                0x0020 0x02E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL0__KEY_COL0                             0x0024 0x02EC 0x06A0 0x0 0x0
+#define MX6SLL_PAD_KEY_COL0__I2C2_SCL                             0x0024 0x02EC 0x0684 0x1 0x0
+#define MX6SLL_PAD_KEY_COL0__LCD_DATA00                           0x0024 0x02EC 0x06D8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL0__SD1_CD_B                             0x0024 0x02EC 0x0770 0x4 0x1
+#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24                           0x0024 0x02EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0                             0x0028 0x02F0 0x06C0 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA                             0x0028 0x02F0 0x0688 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01                           0x0028 0x02F0 0x06DC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW0__SD1_WP                               0x0028 0x02F0 0x0774 0x4 0x1
+#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25                           0x0028 0x02F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL1__KEY_COL1                             0x002C 0x02F4 0x06A4 0x0 0x0
+#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI                          0x002C 0x02F4 0x0658 0x1 0x1
+#define MX6SLL_PAD_KEY_COL1__LCD_DATA02                           0x002C 0x02F4 0x06E0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL1__SD3_DATA4                            0x002C 0x02F4 0x0784 0x4 0x0
+#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26                           0x002C 0x02F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1                             0x0030 0x02F8 0x06C4 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO                          0x0030 0x02F8 0x0654 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03                           0x0030 0x02F8 0x06E4 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD                            0x0030 0x02F8 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5                            0x0030 0x02F8 0x0788 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27                           0x0030 0x02F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL2__KEY_COL2                             0x0034 0x02FC 0x06A8 0x0 0x0
+#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0                           0x0034 0x02FC 0x065C 0x1 0x1
+#define MX6SLL_PAD_KEY_COL2__LCD_DATA04                           0x0034 0x02FC 0x06E8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL2__CSI_DATA12                           0x0034 0x02FC 0x05B8 0x3 0x1
+#define MX6SLL_PAD_KEY_COL2__SD3_DATA6                            0x0034 0x02FC 0x078C 0x4 0x0
+#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28                           0x0034 0x02FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2                             0x0038 0x0300 0x06C8 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK                          0x0038 0x0300 0x0650 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05                           0x0038 0x0300 0x06EC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13                           0x0038 0x0300 0x05BC 0x3 0x1
+#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7                            0x0038 0x0300 0x0790 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29                           0x0038 0x0300 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__KEY_COL3                             0x003C 0x0304 0x06AC 0x0 0x0
+#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS                            0x003C 0x0304 0x05A0 0x1 0x1
+#define MX6SLL_PAD_KEY_COL3__LCD_DATA06                           0x003C 0x0304 0x06F0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL3__CSI_DATA14                           0x003C 0x0304 0x05C0 0x3 0x1
+#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30                           0x003C 0x0304 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__SD1_RESET                            0x003C 0x0304 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3                             0x0040 0x0308 0x06CC 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC                             0x0040 0x0308 0x059C 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07                           0x0040 0x0308 0x06F4 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15                           0x0040 0x0308 0x05C4 0x3 0x2
+#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31                           0x0040 0x0308 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT                          0x0040 0x0308 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL4__KEY_COL4                             0x0044 0x030C 0x06B0 0x0 0x1
+#define MX6SLL_PAD_KEY_COL4__AUD6_RXD                             0x0044 0x030C 0x0594 0x1 0x1
+#define MX6SLL_PAD_KEY_COL4__LCD_DATA08                           0x0044 0x030C 0x06F8 0x2 0x1
+#define MX6SLL_PAD_KEY_COL4__CSI_DATA16                           0x0044 0x030C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00                           0x0044 0x030C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR                         0x0044 0x030C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4                             0x0048 0x0310 0x06D0 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC                             0x0048 0x0310 0x05A4 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09                           0x0048 0x0310 0x06FC 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17                           0x0048 0x0310 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01                           0x0048 0x0310 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC                          0x0048 0x0310 0x076C 0x6 0x2
+#define MX6SLL_PAD_KEY_COL5__KEY_COL5                             0x004C 0x0314 0x0694 0x0 0x1
+#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS                            0x004C 0x0314 0x05A8 0x1 0x1
+#define MX6SLL_PAD_KEY_COL5__LCD_DATA10                           0x004C 0x0314 0x0700 0x2 0x0
+#define MX6SLL_PAD_KEY_COL5__CSI_DATA18                           0x004C 0x0314 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02                           0x004C 0x0314 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR                         0x004C 0x0314 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5                             0x0050 0x0318 0x06B4 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD                             0x0050 0x0318 0x0598 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11                           0x0050 0x0318 0x0704 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19                           0x0050 0x0318 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03                           0x0050 0x0318 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC                          0x0050 0x0318 0x0768 0x6 0x3
+#define MX6SLL_PAD_KEY_COL6__KEY_COL6                             0x0054 0x031C 0x0698 0x0 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX                         0x0054 0x031C 0x075C 0x1 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX                         0x0054 0x031C 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL6__LCD_DATA12                           0x0054 0x031C 0x0708 0x2 0x1
+#define MX6SLL_PAD_KEY_COL6__CSI_DATA20                           0x0054 0x031C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04                           0x0054 0x031C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL6__SD3_RESET                            0x0054 0x031C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6                             0x0058 0x0320 0x06B8 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX                         0x0058 0x0320 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX                         0x0058 0x0320 0x075C 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13                           0x0058 0x0320 0x070C 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21                           0x0058 0x0320 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05                           0x0058 0x0320 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT                          0x0058 0x0320 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL7__KEY_COL7                             0x005C 0x0324 0x069C 0x0 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS                        0x005C 0x0324 0x0758 0x1 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS                        0x005C 0x0324 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL7__LCD_DATA14                           0x005C 0x0324 0x0710 0x2 0x1
+#define MX6SLL_PAD_KEY_COL7__CSI_DATA22                           0x005C 0x0324 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06                           0x005C 0x0324 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL7__SD1_WP                               0x005C 0x0324 0x0774 0x6 0x3
+#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7                             0x0060 0x0328 0x06BC 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS                        0x0060 0x0328 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS                        0x0060 0x0328 0x0758 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15                           0x0060 0x0328 0x0714 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23                           0x0060 0x0328 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07                           0x0060 0x0328 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B                             0x0060 0x0328 0x0770 0x6 0x3
+#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00                       0x0064 0x032C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI                       0x0064 0x032C 0x0658 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24                        0x0064 0x032C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00                        0x0064 0x032C 0x05C8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07                        0x0064 0x032C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01                       0x0068 0x0330 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO                       0x0068 0x0330 0x0654 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25                        0x0068 0x0330 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01                        0x0068 0x0330 0x05CC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08                        0x0068 0x0330 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02                       0x006C 0x0334 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0                        0x006C 0x0334 0x065C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26                        0x006C 0x0334 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02                        0x006C 0x0334 0x05D0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09                        0x006C 0x0334 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03                       0x0070 0x0338 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK                       0x0070 0x0338 0x0650 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27                        0x0070 0x0338 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03                        0x0070 0x0338 0x05D4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10                        0x0070 0x0338 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04                       0x0074 0x033C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1                        0x0074 0x033C 0x0660 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28                        0x0074 0x033C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04                        0x0074 0x033C 0x05D8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11                        0x0074 0x033C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05                       0x0078 0x0340 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2                        0x0078 0x0340 0x0664 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29                        0x0078 0x0340 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05                        0x0078 0x0340 0x05DC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12                        0x0078 0x0340 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06                       0x007C 0x0344 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3                        0x007C 0x0344 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30                        0x007C 0x0344 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06                        0x007C 0x0344 0x05E0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13                        0x007C 0x0344 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07                       0x0080 0x0348 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY                        0x0080 0x0348 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31                        0x0080 0x0348 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07                        0x0080 0x0348 0x05E4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14                        0x0080 0x0348 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08                       0x0084 0x034C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI                       0x0084 0x034C 0x063C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                    0x0084 0x034C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15                        0x0084 0x034C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09                       0x0088 0x0350 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO                       0x0088 0x0350 0x0638 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                    0x0088 0x0350 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16                        0x0088 0x0350 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10                       0x008C 0x0354 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0                        0x008C 0x0354 0x0648 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                    0x008C 0x0354 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17                        0x008C 0x0354 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11                       0x0090 0x0358 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK                       0x0090 0x0358 0x0630 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                    0x0090 0x0358 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18                        0x0090 0x0358 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12                       0x0094 0x035C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX                      0x0094 0x035C 0x074C 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX                      0x0094 0x035C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM                      0x0094 0x035C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19                        0x0094 0x035C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1                        0x0094 0x035C 0x064C 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13                       0x0098 0x0360 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX                      0x0098 0x0360 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX                      0x0098 0x0360 0x074C 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ                      0x0098 0x0360 0x0668 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20                        0x0098 0x0360 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2                        0x0098 0x0360 0x0640 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14                       0x009C 0x0364 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS                     0x009C 0x0364 0x0748 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS                     0x009C 0x0364 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT                     0x009C 0x0364 0x066C 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21                        0x009C 0x0364 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3                        0x009C 0x0364 0x0644 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15                       0x00A0 0x0368 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS                     0x00A0 0x0368 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS                     0x00A0 0x0368 0x0748 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE                     0x00A0 0x0368 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22                        0x00A0 0x0368 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY                        0x00A0 0x0368 0x0634 0x6 0x1
+#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P                       0x00A4 0x036C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI                        0x00A4 0x036C 0x0624 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL                           0x00A4 0x036C 0x0684 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08                         0x00A4 0x036C 0x05E8 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23                         0x00A4 0x036C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE                           0x00A8 0x0370 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO                         0x00A8 0x0370 0x0620 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA                            0x00A8 0x0370 0x0688 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09                          0x00A8 0x0370 0x05EC 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24                          0x00A8 0x0370 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE                           0x00AC 0x0374 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0                          0x00AC 0x0374 0x0628 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10                          0x00AC 0x0374 0x05B0 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25                          0x00AC 0x0374 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR                         0x00B0 0x0378 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK                        0x00B0 0x0378 0x061C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4                         0x00B0 0x0378 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11                         0x00B0 0x0378 0x05B4 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26                         0x00B0 0x0378 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0                         0x00B4 0x037C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1                         0x00B4 0x037C 0x062C 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT                           0x00B4 0x037C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27                         0x00B4 0x037C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1                         0x00B8 0x0380 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B                            0x00B8 0x0380 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT                           0x00B8 0x0380 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28                         0x00B8 0x0380 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2                         0x00BC 0x0384 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL                           0x00BC 0x0384 0x068C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT                           0x00BC 0x0384 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29                         0x00BC 0x0384 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3                         0x00C0 0x0388 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA                           0x00C0 0x0388 0x0690 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT                           0x00C0 0x0388 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30                         0x00C0 0x0388 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK                         0x00C4 0x038C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2                         0x00C4 0x038C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK                         0x00C4 0x038C 0x05F4 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31                         0x00C4 0x038C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET                          0x00C4 0x038C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE                           0x00C8 0x0390 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3                          0x00C8 0x0390 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC                           0x00C8 0x0390 0x05F0 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00                          0x00C8 0x0390 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT                         0x00C8 0x0390 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL                           0x00CC 0x0394 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY                          0x00CC 0x0394 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK                            0x00CC 0x0394 0x0000 0x3 0x0
+#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01                          0x00CC 0x0394 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDRL__SD2_WP                              0x00CC 0x0394 0x077C 0x6 0x2
+#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP                           0x00D0 0x0398 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT                            0x00D0 0x0398 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC                           0x00D0 0x0398 0x05F8 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02                          0x00D0 0x0398 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B                            0x00D0 0x0398 0x0778 0x6 0x2
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0                         0x00D4 0x039C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS                          0x00D4 0x039C 0x0588 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX                       0x00D4 0x039C 0x0754 0x2 0x4
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX                       0x00D4 0x039C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03                         0x00D4 0x039C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5                         0x00D4 0x039C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1                         0x00D8 0x03A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD                           0x00D8 0x03A0 0x057C 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX                       0x00D8 0x03A0 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX                       0x00D8 0x03A0 0x0754 0x2 0x5
+#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04                         0x00D8 0x03A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6                         0x00D8 0x03A0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0                           0x00DC 0x03A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS                       0x00DC 0x03A4 0x0750 0x2 0x2
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS                       0x00DC 0x03A4 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05                          0x00DC 0x03A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7                          0x00DC 0x03A4 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1                           0x00E0 0x03A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS                       0x00E0 0x03A8 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS                       0x00E0 0x03A8 0x0750 0x2 0x3
+#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06                          0x00E0 0x03A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8                          0x00E0 0x03A8 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                 0x00E4 0x03AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC                       0x00E4 0x03AC 0x0584 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16                     0x00E4 0x03AC 0x0718 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                     0x00E4 0x03AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                 0x00E8 0x03B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                      0x00E8 0x03B0 0x0590 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17                     0x00E8 0x03B0 0x071C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                     0x00E8 0x03B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                 0x00EC 0x03B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD                       0x00EC 0x03B4 0x0580 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18                     0x00EC 0x03B4 0x0720 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                     0x00EC 0x03B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                 0x00F0 0x03B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC                       0x00F0 0x03B8 0x058C 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19                     0x00F0 0x03B8 0x0724 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                     0x00F0 0x03B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM                     0x00F4 0x03BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20                       0x00F4 0x03BC 0x0728 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID                      0x00F4 0x03BC 0x055C 0x4 0x4
+#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11                       0x00F4 0x03BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET                        0x00F4 0x03BC 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                     0x00F8 0x03C0 0x0668 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21                       0x00F8 0x03C0 0x072C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                      0x00F8 0x03C0 0x0560 0x4 0x3
+#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12                       0x00F8 0x03C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT                      0x00F8 0x03C0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                   0x00FC 0x03C4 0x066C 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22                      0x00FC 0x03C4 0x0730 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI                      0x00FC 0x03C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13                      0x00FC 0x03C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP                          0x00FC 0x03C4 0x0794 0x6 0x2
+#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                   0x0100 0x03C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23                      0x0100 0x03C8 0x0734 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO                      0x0100 0x03C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14                      0x0100 0x03C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B                        0x0100 0x03C8 0x0780 0x6 0x2
+#define MX6SLL_PAD_LCD_CLK__LCD_CLK                               0x0104 0x03CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN                            0x0104 0x03CC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_CLK__PWM4_OUT                              0x0104 0x03CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15                            0x0104 0x03CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE                         0x0108 0x03D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E                           0x0108 0x03D0 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16                         0x0108 0x03D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC                           0x010C 0x03D4 0x06D4 0x0 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_CS                              0x010C 0x03D4 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX                        0x010C 0x03D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX                        0x010C 0x03D4 0x074C 0x4 0x1
+#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17                          0x010C 0x03D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK                       0x010C 0x03D4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC                           0x0110 0x03D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_RS                              0x0110 0x03D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS                       0x0110 0x03D8 0x0748 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS                       0x0110 0x03D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18                          0x0110 0x03D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL                       0x0110 0x03D8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_RESET                           0x0114 0x03DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_BUSY                            0x0114 0x03DC 0x06D4 0x2 0x1
+#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS                       0x0114 0x03DC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS                       0x0114 0x03DC 0x0748 0x4 0x1
+#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19                          0x0114 0x03DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY                      0x0114 0x03DC 0x05AC 0x6 0x2
+#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00                         0x0118 0x03E0 0x06D8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI                        0x0118 0x03E0 0x0608 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID                        0x0118 0x03E0 0x0560 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT                           0x0118 0x03E0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B                        0x0118 0x03E0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20                         0x0118 0x03E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00                        0x0118 0x03E0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00                     0x0118 0x03E0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01                         0x011C 0x03E4 0x06DC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO                        0x011C 0x03E4 0x0604 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID                        0x011C 0x03E4 0x055C 0x2 0x3
+#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT                           0x011C 0x03E4 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS                          0x011C 0x03E4 0x0570 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21                         0x011C 0x03E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01                        0x011C 0x03E4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01                     0x011C 0x03E4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02                         0x0120 0x03E8 0x06E0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0                         0x0120 0x03E8 0x0614 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT                          0x0120 0x03E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT                           0x0120 0x03E8 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC                           0x0120 0x03E8 0x056C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22                         0x0120 0x03E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02                        0x0120 0x03E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02                     0x0120 0x03E8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03                         0x0124 0x03EC 0x06E4 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK                        0x0124 0x03EC 0x05FC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B                        0x0124 0x03EC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT                           0x0124 0x03EC 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD                           0x0124 0x03EC 0x0564 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23                         0x0124 0x03EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03                        0x0124 0x03EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03                     0x0124 0x03EC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04                         0x0128 0x03F0 0x06E8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1                         0x0128 0x03F0 0x060C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC                          0x0128 0x03F0 0x05F8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                  0x0128 0x03F0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC                           0x0128 0x03F0 0x0574 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24                         0x0128 0x03F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04                        0x0128 0x03F0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04                     0x0128 0x03F0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05                         0x012C 0x03F4 0x06EC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2                         0x012C 0x03F4 0x0610 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC                          0x012C 0x03F4 0x05F0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS                          0x012C 0x03F4 0x0578 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25                         0x012C 0x03F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05                        0x012C 0x03F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05                     0x012C 0x03F4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06                         0x0130 0x03F8 0x06F0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3                         0x0130 0x03F8 0x0618 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK                         0x0130 0x03F8 0x05F4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD                           0x0130 0x03F8 0x0568 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26                         0x0130 0x03F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06                        0x0130 0x03F8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06                     0x0130 0x03F8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07                         0x0134 0x03FC 0x06F4 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY                         0x0134 0x03FC 0x0600 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK                           0x0134 0x03FC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT                      0x0134 0x03FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27                         0x0134 0x03FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07                        0x0134 0x03FC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07                     0x0134 0x03FC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08                         0x0138 0x0400 0x06F8 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA08__KEY_COL0                           0x0138 0x0400 0x06A0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09                         0x0138 0x0400 0x05EC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK                        0x0138 0x0400 0x061C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28                         0x0138 0x0400 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08                        0x0138 0x0400 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08                     0x0138 0x0400 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09                         0x013C 0x0404 0x06FC 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0                           0x013C 0x0404 0x06C0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08                         0x013C 0x0404 0x05E8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI                        0x013C 0x0404 0x0624 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29                         0x013C 0x0404 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09                        0x013C 0x0404 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09                     0x013C 0x0404 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10                         0x0140 0x0408 0x0700 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA10__KEY_COL1                           0x0140 0x0408 0x06A4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07                         0x0140 0x0408 0x05E4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO                        0x0140 0x0408 0x0620 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30                         0x0140 0x0408 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10                        0x0140 0x0408 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10                     0x0140 0x0408 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11                         0x0144 0x040C 0x0704 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1                           0x0144 0x040C 0x06C4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06                         0x0144 0x040C 0x05E0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1                         0x0144 0x040C 0x062C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31                         0x0144 0x040C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11                        0x0144 0x040C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11                     0x0144 0x040C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12                         0x0148 0x0410 0x0708 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA12__KEY_COL2                           0x0148 0x0410 0x06A8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05                         0x0148 0x0410 0x05DC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS                      0x0148 0x0410 0x0760 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS                      0x0148 0x0410 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00                         0x0148 0x0410 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12                        0x0148 0x0410 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12                     0x0148 0x0410 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13                         0x014C 0x0414 0x070C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2                           0x014C 0x0414 0x06C8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04                         0x014C 0x0414 0x05D8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS                      0x014C 0x0414 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS                      0x014C 0x0414 0x0760 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01                         0x014C 0x0414 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13                        0x014C 0x0414 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13                     0x014C 0x0414 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14                         0x0150 0x0418 0x0710 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA14__KEY_COL3                           0x0150 0x0418 0x06AC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03                         0x0150 0x0418 0x05D4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX                       0x0150 0x0418 0x0764 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX                       0x0150 0x0418 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02                         0x0150 0x0418 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14                        0x0150 0x0418 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14                     0x0150 0x0418 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15                         0x0154 0x041C 0x0714 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3                           0x0154 0x041C 0x06CC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02                         0x0154 0x041C 0x05D0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX                       0x0154 0x041C 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX                       0x0154 0x041C 0x0764 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03                         0x0154 0x041C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15                        0x0154 0x041C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15                     0x0154 0x041C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16                         0x0158 0x0420 0x0718 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA16__KEY_COL4                           0x0158 0x0420 0x06B0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01                         0x0158 0x0420 0x05CC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL                           0x0158 0x0420 0x0684 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04                         0x0158 0x0420 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24                     0x0158 0x0420 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17                         0x015C 0x0424 0x071C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4                           0x015C 0x0424 0x06D0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00                         0x015C 0x0424 0x05C8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA                           0x015C 0x0424 0x0688 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05                         0x015C 0x0424 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25                     0x015C 0x0424 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18                         0x0160 0x0428 0x0720 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA18__KEY_COL5                           0x0160 0x0428 0x0694 0x1 0x2
+#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15                         0x0160 0x0428 0x05C4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1                       0x0160 0x0428 0x0670 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06                         0x0160 0x0428 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26                     0x0160 0x0428 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19                         0x0164 0x042C 0x0724 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5                           0x0164 0x042C 0x06B4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14                         0x0164 0x042C 0x05C0 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2                       0x0164 0x042C 0x0674 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07                         0x0164 0x042C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27                     0x0164 0x042C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20                         0x0168 0x0430 0x0728 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA20__KEY_COL6                           0x0168 0x0430 0x0698 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13                         0x0168 0x0430 0x05BC 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1                       0x0168 0x0430 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08                         0x0168 0x0430 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28                     0x0168 0x0430 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21                         0x016C 0x0434 0x072C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6                           0x016C 0x0434 0x06B8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12                         0x016C 0x0434 0x05B8 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2                       0x016C 0x0434 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09                         0x016C 0x0434 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29                     0x016C 0x0434 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22                         0x0170 0x0438 0x0730 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA22__KEY_COL7                           0x0170 0x0438 0x069C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11                         0x0170 0x0438 0x05B4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3                       0x0170 0x0438 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10                         0x0170 0x0438 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30                     0x0170 0x0438 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23                         0x0174 0x043C 0x0734 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7                           0x0174 0x043C 0x06BC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10                         0x0174 0x043C 0x05B0 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN                          0x0174 0x043C 0x0678 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11                         0x0174 0x043C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31                     0x0174 0x043C 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS                            0x0178 0x0440 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL                             0x0178 0x0440 0x067C 0x1 0x1
+#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX                         0x0178 0x0440 0x0754 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX                         0x0178 0x0440 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL                             0x0178 0x0440 0x068C 0x4 0x1
+#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00                           0x0178 0x0440 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0                           0x0178 0x0440 0x0648 0x6 0x0
+#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND                           0x0178 0x0440 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXC__AUD3_RXC                              0x017C 0x0444 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXC__I2C1_SDA                              0x017C 0x0444 0x0680 0x1 0x1
+#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX                          0x017C 0x0444 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX                          0x017C 0x0444 0x0754 0x2 0x1
+#define MX6SLL_PAD_AUD_RXC__I2C3_SDA                              0x017C 0x0444 0x0690 0x4 0x1
+#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01                            0x017C 0x0444 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1                            0x017C 0x0444 0x064C 0x6 0x0
+#define MX6SLL_PAD_AUD_RXD__AUD3_RXD                              0x0180 0x0448 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI                           0x0180 0x0448 0x063C 0x1 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX                          0x0180 0x0448 0x075C 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX                          0x0180 0x0448 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__SD1_LCTL                              0x0180 0x0448 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02                            0x0180 0x0448 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXC__AUD3_TXC                              0x0184 0x044C 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO                           0x0184 0x044C 0x0638 0x1 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX                          0x0184 0x044C 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX                          0x0184 0x044C 0x075C 0x2 0x1
+#define MX6SLL_PAD_AUD_TXC__SD2_LCTL                              0x0184 0x044C 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03                            0x0184 0x044C 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS                            0x0188 0x0450 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT                             0x0188 0x0450 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS                        0x0188 0x0450 0x0758 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS                        0x0188 0x0450 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL                             0x0188 0x0450 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04                           0x0188 0x0450 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXD__AUD3_TXD                              0x018C 0x0454 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK                           0x018C 0x0454 0x0630 0x1 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS                         0x018C 0x0454 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS                         0x018C 0x0454 0x0758 0x2 0x1
+#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05                            0x018C 0x0454 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT                        0x0190 0x0458 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT                             0x0190 0x0458 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY                           0x0190 0x0458 0x0634 0x2 0x0
+#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                    0x0190 0x0458 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06                           0x0190 0x0458 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK                        0x0190 0x0458 0x073C 0x6 0x1
+#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX                        0x0194 0x045C 0x0744 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX                        0x0194 0x045C 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__PWM1_OUT                            0x0194 0x045C 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX                        0x0194 0x045C 0x075C 0x2 0x4
+#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX                        0x0194 0x045C 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX                        0x0194 0x045C 0x0764 0x4 0x6
+#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX                        0x0194 0x045C 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16                          0x0194 0x045C 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX                        0x0198 0x0460 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX                        0x0198 0x0460 0x0744 0x0 0x1
+#define MX6SLL_PAD_UART1_TXD__PWM2_OUT                            0x0198 0x0460 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX                        0x0198 0x0460 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX                        0x0198 0x0460 0x075C 0x2 0x5
+#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX                        0x0198 0x0460 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX                        0x0198 0x0460 0x0764 0x4 0x7
+#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17                          0x0198 0x0460 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B                         0x0198 0x0460 0x0000 0x7 0x0
+#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL                             0x019C 0x0464 0x067C 0x0 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS                        0x019C 0x0464 0x0740 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS                        0x019C 0x0464 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2                           0x019C 0x0464 0x0640 0x2 0x0
+#define MX6SLL_PAD_I2C1_SCL__SD3_RESET                            0x019C 0x0464 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12                           0x019C 0x0464 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1                           0x019C 0x0464 0x060C 0x6 0x0
+#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA                             0x01A0 0x0468 0x0680 0x0 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS                        0x01A0 0x0468 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS                        0x01A0 0x0468 0x0740 0x1 0x1
+#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3                           0x01A0 0x0468 0x0644 0x2 0x0
+#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT                          0x01A0 0x0468 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13                           0x01A0 0x0468 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2                           0x01A0 0x0468 0x0610 0x6 0x0
+#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL                             0x01A4 0x046C 0x0684 0x0 0x3
+#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS                            0x01A4 0x046C 0x0570 0x1 0x2
+#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN                             0x01A4 0x046C 0x0738 0x2 0x2
+#define MX6SLL_PAD_I2C2_SCL__SD3_WP                               0x01A4 0x046C 0x0794 0x4 0x3
+#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14                           0x01A4 0x046C 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY                           0x01A4 0x046C 0x0600 0x6 0x1
+#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA                             0x01A8 0x0470 0x0688 0x0 0x3
+#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC                             0x01A8 0x0470 0x056C 0x1 0x2
+#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT                            0x01A8 0x0470 0x0000 0x2 0x0
+#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B                             0x01A8 0x0470 0x0780 0x4 0x3
+#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15                           0x01A8 0x0470 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       0x01AC 0x0474 0x05FC 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD                          0x01AC 0x0474 0x0568 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX                      0x01AC 0x0474 0x0764 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX                      0x01AC 0x0474 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0                        0x01AC 0x0474 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET                         0x01AC 0x0474 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08                        0x01AC 0x0474 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC                       0x01AC 0x0474 0x0768 0x6 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       0x01B0 0x0478 0x0608 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC                          0x01B0 0x0478 0x0574 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX                      0x01B0 0x0478 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX                      0x01B0 0x0478 0x0764 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1                        0x01B0 0x0478 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT                       0x01B0 0x0478 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09                        0x01B0 0x0478 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO                       0x01B4 0x047C 0x0604 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS                         0x01B4 0x047C 0x0578 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS                     0x01B4 0x047C 0x0760 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS                     0x01B4 0x047C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0                         0x01B4 0x047C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP                            0x01B4 0x047C 0x077C 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10                        0x01B4 0x047C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0                         0x01B8 0x0480 0x0614 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD                           0x01B8 0x0480 0x0564 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS                      0x01B8 0x0480 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS                      0x01B8 0x0480 0x0760 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1                          0x01B8 0x0480 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B                           0x01B8 0x0480 0x0778 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11                         0x01B8 0x0480 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR                       0x01B8 0x0480 0x0000 0x6 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       0x01BC 0x0484 0x061C 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                     0x01BC 0x0484 0x073C 0x1 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX                      0x01BC 0x0484 0x0754 0x2 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX                      0x01BC 0x0484 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK                        0x01BC 0x0484 0x05F4 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET                         0x01BC 0x0484 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12                        0x01BC 0x0484 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC                       0x01BC 0x0484 0x0768 0x6 0x2
+#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       0x01C0 0x0488 0x0624 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                   0x01C0 0x0488 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX                      0x01C0 0x0488 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX                      0x01C0 0x0488 0x0754 0x2 0x3
+#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC                         0x01C0 0x0488 0x05F0 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT                       0x01C0 0x0488 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13                        0x01C0 0x0488 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO                       0x01C4 0x048C 0x0620 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                   0x01C4 0x048C 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS                     0x01C4 0x048C 0x0750 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS                     0x01C4 0x048C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK                          0x01C4 0x048C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP                            0x01C4 0x048C 0x0774 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14                        0x01C4 0x048C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC                       0x01C4 0x048C 0x076C 0x6 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0                         0x01C8 0x0490 0x0628 0x0 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3                         0x01C8 0x0490 0x0618 0x1 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS                      0x01C8 0x0490 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS                      0x01C8 0x0490 0x0750 0x2 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC                          0x01C8 0x0490 0x05F8 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B                           0x01C8 0x0490 0x0770 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15                         0x01C8 0x0490 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR                       0x01C8 0x0490 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD1_CLK__SD1_CLK                               0x01CC 0x0494 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CLK__KEY_COL0                              0x01CC 0x0494 0x06A0 0x2 0x2
+#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4                            0x01CC 0x0494 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15                            0x01CC 0x0494 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_CMD__SD1_CMD                               0x01D0 0x0498 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CMD__KEY_ROW0                              0x01D0 0x0498 0x06C0 0x2 0x2
+#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5                            0x01D0 0x0498 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14                            0x01D0 0x0498 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0                           0x01D4 0x049C 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA0__KEY_COL1                            0x01D4 0x049C 0x06A4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6                          0x01D4 0x049C 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11                          0x01D4 0x049C 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1                           0x01D8 0x04A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1                            0x01D8 0x04A0 0x06C4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7                          0x01D8 0x04A0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08                          0x01D8 0x04A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2                           0x01DC 0x04A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA2__KEY_COL2                            0x01DC 0x04A4 0x06A8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8                          0x01DC 0x04A4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                          0x01DC 0x04A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3                           0x01E0 0x04A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2                            0x01E0 0x04A8 0x06C8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9                          0x01E0 0x04A8 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                          0x01E0 0x04A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4                           0x01E4 0x04AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA4__KEY_COL3                            0x01E4 0x04AC 0x06AC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N                        0x01E4 0x04AC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX                        0x01E4 0x04AC 0x075C 0x4 0x6
+#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX                        0x01E4 0x04AC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12                          0x01E4 0x04AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5                           0x01E8 0x04B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3                            0x01E8 0x04B0 0x06CC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED                          0x01E8 0x04B0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX                        0x01E8 0x04B0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX                        0x01E8 0x04B0 0x075C 0x4 0x7
+#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09                          0x01E8 0x04B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6                           0x01EC 0x04B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA6__KEY_COL4                            0x01EC 0x04B4 0x06B0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ                          0x01EC 0x04B4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS                       0x01EC 0x04B4 0x0758 0x4 0x4
+#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS                       0x01EC 0x04B4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07                          0x01EC 0x04B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7                           0x01F0 0x04B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4                            0x01F0 0x04B8 0x06D0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY                      0x01F0 0x04B8 0x05AC 0x3 0x3
+#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS                       0x01F0 0x04B8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS                       0x01F0 0x04B8 0x0758 0x4 0x5
+#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10                          0x01F0 0x04B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_RESET__SD2_RESET                           0x01F4 0x04BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_RESET__WDOG2_B                             0x01F4 0x04BC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT                           0x01F4 0x04BC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD2_RESET__CSI_MCLK                            0x01F4 0x04BC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27                          0x01F4 0x04BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CLK__SD2_CLK                               0x01F8 0x04C0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS                             0x01F8 0x04C0 0x0570 0x1 0x1
+#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK                           0x01F8 0x04C0 0x0630 0x2 0x1
+#define MX6SLL_PAD_SD2_CLK__CSI_DATA00                            0x01F8 0x04C0 0x05C8 0x3 0x1
+#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05                            0x01F8 0x04C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CMD__SD2_CMD                               0x01FC 0x04C4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CMD__AUD4_RXC                              0x01FC 0x04C4 0x056C 0x1 0x1
+#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0                            0x01FC 0x04C4 0x0648 0x2 0x1
+#define MX6SLL_PAD_SD2_CMD__CSI_DATA01                            0x01FC 0x04C4 0x05CC 0x3 0x1
+#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT                             0x01FC 0x04C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04                            0x01FC 0x04C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0                           0x0200 0x04C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD                            0x0200 0x04C8 0x0564 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI                         0x0200 0x04C8 0x063C 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02                          0x0200 0x04C8 0x05D0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS                       0x0200 0x04C8 0x0760 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS                       0x0200 0x04C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01                          0x0200 0x04C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1                           0x0204 0x04CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC                            0x0204 0x04CC 0x0574 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO                         0x0204 0x04CC 0x0638 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03                          0x0204 0x04CC 0x05D4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS                       0x0204 0x04CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS                       0x0204 0x04CC 0x0760 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30                          0x0204 0x04CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2                           0x0208 0x04D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS                           0x0208 0x04D0 0x0578 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04                          0x0208 0x04D0 0x05D8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX                        0x0208 0x04D0 0x0764 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX                        0x0208 0x04D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03                          0x0208 0x04D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3                           0x020C 0x04D4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD                            0x020C 0x04D4 0x0568 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05                          0x020C 0x04D4 0x05DC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX                        0x020C 0x04D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX                        0x020C 0x04D4 0x0764 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28                          0x020C 0x04D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4                           0x0210 0x04D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4                           0x0210 0x04D8 0x0784 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX                        0x0210 0x04D8 0x074C 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX                        0x0210 0x04D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06                          0x0210 0x04D8 0x05E0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT                           0x0210 0x04D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02                          0x0210 0x04D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5                           0x0214 0x04DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5                           0x0214 0x04DC 0x0788 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX                        0x0214 0x04DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX                        0x0214 0x04DC 0x074C 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07                          0x0214 0x04DC 0x05E4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN                            0x0214 0x04DC 0x0738 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31                          0x0214 0x04DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6                           0x0218 0x04E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6                           0x0218 0x04E0 0x078C 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS                       0x0218 0x04E0 0x0748 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS                       0x0218 0x04E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08                          0x0218 0x04E0 0x05E8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA6__SD2_WP                              0x0218 0x04E0 0x077C 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29                          0x0218 0x04E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7                           0x021C 0x04E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7                           0x021C 0x04E4 0x0790 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS                       0x021C 0x04E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS                       0x021C 0x04E4 0x0748 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09                          0x021C 0x04E4 0x05EC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B                            0x021C 0x04E4 0x0778 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00                          0x021C 0x04E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__SD3_CLK                               0x0220 0x04E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS                             0x0220 0x04E8 0x0588 0x1 0x0
+#define MX6SLL_PAD_SD3_CLK__KEY_COL5                              0x0220 0x04E8 0x0694 0x2 0x0
+#define MX6SLL_PAD_SD3_CLK__CSI_DATA10                            0x0220 0x04E8 0x05B0 0x3 0x0
+#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB                     0x0220 0x04E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18                            0x0220 0x04E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR                          0x0220 0x04E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_CMD__SD3_CMD                               0x0224 0x04EC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CMD__AUD5_RXC                              0x0224 0x04EC 0x0584 0x1 0x0
+#define MX6SLL_PAD_SD3_CMD__KEY_ROW5                              0x0224 0x04EC 0x06B4 0x2 0x0
+#define MX6SLL_PAD_SD3_CMD__CSI_DATA11                            0x0224 0x04EC 0x05B4 0x3 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID                           0x0224 0x04EC 0x0560 0x4 0x1
+#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21                            0x0224 0x04EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR                          0x0224 0x04EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0                           0x0228 0x04F0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD                            0x0228 0x04F0 0x057C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA0__KEY_COL6                            0x0228 0x04F0 0x0698 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12                          0x0228 0x04F0 0x05B8 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID                         0x0228 0x04F0 0x055C 0x4 0x1
+#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19                          0x0228 0x04F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1                           0x022C 0x04F4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC                            0x022C 0x04F4 0x058C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6                            0x022C 0x04F4 0x06B8 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13                          0x022C 0x04F4 0x05BC 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT                         0x022C 0x04F4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20                          0x022C 0x04F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B                           0x022C 0x04F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2                           0x0230 0x04F8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS                           0x0230 0x04F8 0x0590 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA2__KEY_COL7                            0x0230 0x04F8 0x069C 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14                          0x0230 0x04F8 0x05C0 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT                           0x0230 0x04F8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16                          0x0230 0x04F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC                         0x0230 0x04F8 0x0768 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3                           0x0234 0x04FC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD                            0x0234 0x04FC 0x0580 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7                            0x0234 0x04FC 0x06BC 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15                          0x0234 0x04FC 0x05C4 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT                           0x0234 0x04FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17                          0x0234 0x04FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC                         0x0234 0x04FC 0x076C 0x6 0x0
+#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE                         0x0238 0x0500 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS                          0x0238 0x0500 0x05A0 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0                         0x0238 0x0500 0x065C 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1                       0x0238 0x0500 0x0670 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20                         0x0238 0x0500 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE                         0x023C 0x0504 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC                           0x023C 0x0504 0x059C 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK                        0x023C 0x0504 0x0650 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2                       0x023C 0x0504 0x0674 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21                         0x023C 0x0504 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE                         0x0240 0x0508 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD                           0x0240 0x0508 0x0594 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI                        0x0240 0x0508 0x0658 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1                       0x0240 0x0508 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19                         0x0240 0x0508 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC                           0x0244 0x050C 0x05A4 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO                        0x0244 0x050C 0x0654 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2                       0x0244 0x050C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25                         0x0244 0x050C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS                          0x0248 0x0510 0x05A8 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1                         0x0248 0x0510 0x0660 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3                       0x0248 0x0510 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18                         0x0248 0x0510 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD                           0x024C 0x0514 0x0598 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2                         0x024C 0x0514 0x0664 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN                          0x024C 0x0514 0x0678 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24                         0x024C 0x0514 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT                      0x0250 0x0518 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET                          0x0250 0x0518 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET                          0x0250 0x0518 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23                         0x0250 0x0518 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID                        0x0254 0x051C 0x055C 0x2 0x2
+#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT                        0x0254 0x051C 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT                        0x0254 0x051C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17                         0x0254 0x051C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN                           0x0258 0x0520 0x0738 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD1_WP                             0x0258 0x0520 0x0774 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD3_WP                             0x0258 0x0520 0x0794 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22                         0x0258 0x0520 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT                          0x025C 0x0524 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B                           0x025C 0x0524 0x0770 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B                           0x025C 0x0524 0x0780 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16                         0x025C 0x0524 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B                            0x0260 0x0528 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT                           0x0260 0x0528 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY                     0x0260 0x0528 0x05AC 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26                         0x0260 0x0528 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK                      0x0260 0x0528 0x073C 0x6 0x0
+
+#endif /* __DTS_IMX6SLL_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx6sll.dtsi b/roms/u-boot/arch/arm/dts/imx6sll.dtsi
new file mode 100644
index 000000000..349c47a03
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sll.dtsi
@@ -0,0 +1,859 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1225000
+				792000  1175000
+				396000  1075000
+				198000	975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1225000
+				792000          1175000
+				396000          1175000
+				198000		1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			fsl,low-power-run;
+			clocks = <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
+				 <&clks IMX6SLL_CLK_STEP>,
+				 <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1_SYS>,
+				 <&clks IMX6SLL_CLK_PLL1>,
+				 <&clks IMX6SLL_PLL1_BYPASS>,
+				 <&clks IMX6SLL_PLL1_BYPASS_SRC>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
+				      "pll1_bypass_src";
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "ckil";
+		};
+
+		osc: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc";
+		};
+
+		ipp_di0: clock@2 {
+			compatible = "fixed-clock";
+			reg = <2>;
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "ipp_di0";
+		};
+
+		ipp_di1: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "ipp_di1";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		busfreq {
+			compatible = "fsl,imx_busfreq";
+			clocks = <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_PLL2_198M>,
+				 <&clks IMX6SLL_CLK_PLL2_BUS>, <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL3_USB_OTG>, <&clks IMX6SLL_CLK_PERIPH>,
+				 <&clks IMX6SLL_CLK_PERIPH_PRE>, <&clks IMX6SLL_CLK_PERIPH_CLK2>,
+				 <&clks IMX6SLL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SLL_CLK_OSC>,
+				 <&clks IMX6SLL_CLK_AHB>, <&clks IMX6SLL_CLK_AXI_PODF>,
+				 <&clks IMX6SLL_CLK_PERIPH2>, <&clks IMX6SLL_CLK_PERIPH2_PRE>,
+				 <&clks IMX6SLL_CLK_PERIPH2_CLK2>, <&clks IMX6SLL_CLK_PERIPH2_CLK2_SEL>,
+				 <&clks IMX6SLL_CLK_STEP>, <&clks IMX6SLL_CLK_MMDC_P0_FAST>, <&clks IMX6SLL_PLL1_BYPASS_SRC>,
+				 <&clks IMX6SLL_PLL1_BYPASS>, <&clks IMX6SLL_CLK_PLL1_SYS>, <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1>;
+			clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
+				      "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
+				      "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
+				      "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
+			fsl,max_ddr_freq = <400000000>;
+		};
+
+		ocrams: sram@00900000 {
+			compatible = "fsl,lpm-sram";
+			reg = <0x00900000 0x4000>;
+		};
+
+		ocrams_ddr: sram@00904000 {
+			compatible = "fsl,ddr-lpm-sram";
+			reg = <0x00904000 0x1000>;
+		};
+
+		ocram: sram@00905000 {
+			compatible = "mmio-sram";
+			reg = <0x00905000 0x1B000>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@02004000 {
+					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SLL_CLK_OSC>,
+						 <&clks IMX6SLL_CLK_SPDIF>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_IPG>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@02008000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+						 <&clks IMX6SLL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+						 <&clks IMX6SLL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+						 <&clks IMX6SLL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+						 <&clks IMX6SLL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart4: serial@02018000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@02024000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi1: ssi@02028000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+						 <&clks IMX6SLL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi2: ssi2@0202c000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+						 <&clks IMX6SLL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi3: ssi@02030000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+						 <&clks IMX6SLL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				uart3: serial@02034000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-name = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@02080000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM1>,
+					 <&clks IMX6SLL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm2: pwm@02084000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM2>,
+					 <&clks IMX6SLL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm3: pwm@02088000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM3>,
+					 <&clks IMX6SLL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm4: pwm@0208c000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM4>,
+					 <&clks IMX6SLL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			gpt1: gpt@02098000 {
+				compatible = "fsl,imx6sll-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@020b0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG1>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6sll-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6sll-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x4000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0@120 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+			};
+
+			tempmon: tempmon {
+				compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+				clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+				phy-reg_3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x61>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup;
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6sll-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@020e4000 {
+				compatible = "fsl,imx6sll-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			csi: csi@020e8000 {
+				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_CSI>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+				status = "disabled";
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_SDMA>,
+					 <&clks IMX6SLL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				iram = <&ocram>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@020f0000 {
+				compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_PXP>;
+				clock-names = "pxp_ipg", "pxp_axi";
+				status = "disabled";
+			};
+
+			epdc: epdc@020f4000 {
+				compatible = "fsl,imx6sll-epdc", "fsl,imx7d-epdc";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_EPDC_AXI>, <&clks IMX6SLL_CLK_EPDC_PIX>;
+				clock-names = "epdc_axi", "epdc_pix";
+				status = "disabled";
+			};
+
+			lcdif: lcdif@020f8000 {
+				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SLL_CLK_LCDIF_APB>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: dcp@020fc000 {
+				compatible = "fsl,imx6sl-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DCP>;
+				clock-names = "dcp";
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+						"fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@02198000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			romcp@021ac000 {
+				compatible = "fsl,imx6sll-romcp", "syscon";
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			rngb: rngb@021b4000 {
+				compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks =  <&clks IMX6SLL_CLK_DUMMY>;
+			};
+
+			ocotp: ocotp-ctrl@021bc000 {
+				compatible = "fsl,imx6sll-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_OCOTP>;
+			};
+
+			csu: csu@021c0000 {
+				compatible = "fsl,imx6sll-csu";
+				reg = <0x021c0000 0x4000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			snvs_gpr: snvs-gpr@0x021c4000 {
+				compatible = "fsl, imx6sll-snvs-gpr";
+				reg = <0x021c4000 0x10000>;
+			};
+
+			iomuxc_snvs: iomuxc-snvs@021c8000 {
+				compatible = "fsl,imx6sll-iomuxc-snvs";
+				reg = <0x021c80000 0x10000>;
+			};
+
+			audmux: audmux@021d8000 {
+				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-pinfunc.h b/roms/u-boot/arch/arm/dts/imx6sx-pinfunc.h
new file mode 100644
index 000000000..f4dc46207
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-pinfunc.h
@@ -0,0 +1,1668 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6SX_PINFUNC_H
+#define __DTS_IMX6SX_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL                            0x0014 0x035C 0x07A8 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT                      0x0014 0x035C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK                          0x0014 0x035C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT                            0x0014 0x035C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                      0x0014 0x035C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0                          0x0014 0x035C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5               0x0014 0x035C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1                           0x0014 0x035C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA                            0x0018 0x0360 0x07AC 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B                      0x0018 0x0360 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK                        0x0018 0x0360 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO01__CCM_STOP                            0x0018 0x0360 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B                        0x0018 0x0360 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1                          0x0018 0x0360 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL           0x0018 0x0360 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0                           0x0018 0x0360 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL                            0x001C 0x0364 0x07B0 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B                         0x001C 0x0364 0x0864 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK                           0x001C 0x0364 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                     0x001C 0x0364 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B                        0x001C 0x0364 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2                          0x001C 0x0364 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B                        0x001C 0x0364 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO02__PHY_TDI                             0x001C 0x0364 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA                            0x0020 0x0368 0x07B4 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP                           0x0020 0x0368 0x0868 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                   0x0020 0x0368 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                     0x0020 0x0368 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B                        0x0020 0x0368 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX                        0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX                        0x0024 0x036C 0x0830 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2                      0x0024 0x036C 0x076C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX                        0x0028 0x0370 0x0830 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX                        0x0028 0x0370 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1                      0x0028 0x0370 0x0760 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX                        0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX                        0x002C 0x0374 0x0838 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS                       0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS                       0x002C 0x0374 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX                        0x0030 0x0378 0x0838 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX                        0x0030 0x0378 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS                       0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS                       0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44                       0x0030 0x0378 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC                         0x0034 0x037C 0x0860 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
+#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS                       0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS                       0x0034 0x037C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43                       0x0034 0x037C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR                        0x0038 0x0380 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS                       0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS                       0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42                       0x0038 0x0380 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID                      0x003C 0x0384 0x0624 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK                       0x003C 0x0384 0x0828 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT                            0x003C 0x0384 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1                            0x003C 0x0384 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD                          0x003C 0x0384 0x070C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10                         0x003C 0x0384 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                     0x003C 0x0384 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                   0x003C 0x0384 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41                       0x003C 0x0384 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC                         0x0040 0x0388 0x085C 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN                            0x0040 0x0388 0x0824 0x1 0x2
+#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT                            0x0040 0x0388 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1                           0x0040 0x0388 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO11__MLB_DATA                            0x0040 0x0388 0x07EC 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11                         0x0040 0x0388 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                 0x0040 0x0388 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                   0x0040 0x0388 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40                       0x0040 0x0388 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR                        0x0044 0x038C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT                           0x0044 0x038C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT                            0x0044 0x038C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2                           0x0044 0x038C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO12__MLB_CLK                             0x0044 0x038C 0x07E8 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12                         0x0044 0x038C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                 0x0044 0x038C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                   0x0044 0x038C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39                       0x0044 0x038C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                      0x0048 0x0390 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID                      0x0048 0x0390 0x0628 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT                            0x0048 0x0390 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2                            0x0048 0x0390 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO13__MLB_SIG                             0x0048 0x0390 0x07F0 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13                         0x0048 0x0390 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                 0x0048 0x0390 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                   0x0048 0x0390 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38                       0x0048 0x0390 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2                         0x004C 0x0394 0x06A8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK                         0x004C 0x0394 0x078C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                     0x004C 0x0394 0x0684 0x2 0x1
+#define MX6SX_PAD_CSI_DATA00__I2C1_SCL                            0x004C 0x0394 0x07A8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA00__UART6_RI_B                          0x004C 0x0394 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14                         0x004C 0x0394 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23                        0x004C 0x0394 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK                        0x004C 0x0394 0x0800 0x7 0x0
+#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4                         0x004C 0x0394 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37                       0x004C 0x0394 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3                         0x0050 0x0398 0x06AC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS                          0x0050 0x0398 0x077C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                    0x0050 0x0398 0x0688 0x2 0x1
+#define MX6SX_PAD_CSI_DATA01__I2C1_SDA                            0x0050 0x0398 0x07AC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B                         0x0050 0x0398 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15                         0x0050 0x0398 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22                        0x0050 0x0398 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC                        0x0050 0x0398 0x0804 0x7 0x0
+#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5                         0x0050 0x0398 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38                       0x0050 0x0398 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4                         0x0054 0x039C 0x06B0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK                         0x0054 0x039C 0x0788 0x1 0x1
+#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                     0x0054 0x039C 0x067C 0x2 0x1
+#define MX6SX_PAD_CSI_DATA02__KPP_COL_5                           0x0054 0x039C 0x07C8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B                         0x0054 0x039C 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16                         0x0054 0x039C 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21                        0x0054 0x039C 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK                        0x0054 0x039C 0x07F4 0x7 0x0
+#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6                         0x0054 0x039C 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39                       0x0054 0x039C 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5                         0x0058 0x03A0 0x06B4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS                          0x0058 0x03A0 0x0778 0x1 0x1
+#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                    0x0058 0x03A0 0x0680 0x2 0x1
+#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5                           0x0058 0x03A0 0x07D4 0x3 0x0
+#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B                         0x0058 0x03A0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17                         0x0058 0x03A0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20                        0x0058 0x03A0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC                        0x0058 0x03A0 0x07FC 0x7 0x0
+#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7                         0x0058 0x03A0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40                       0x0058 0x03A0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6                         0x005C 0x03A4 0x06B8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
+#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX                        0x005C 0x03A4 0x0858 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX                        0x005C 0x03A4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8                         0x005C 0x03A4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41                       0x005C 0x03A4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7                         0x0060 0x03A8 0x06BC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
+#define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
+#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX                        0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX                        0x0060 0x03A8 0x0858 0x4 0x1
+#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9                         0x0060 0x03A8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42                       0x0060 0x03A8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8                         0x0064 0x03AC 0x06C0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
+#define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
+#define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS                       0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS                       0x0064 0x03AC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10                        0x0064 0x03AC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43                       0x0064 0x03AC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9                         0x0068 0x03B0 0x06C4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
+#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS                       0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS                       0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11                        0x0068 0x03B0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44                       0x0068 0x03B0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
+#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
+#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
+#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS                        0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS                        0x006C 0x03B4 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0                       0x006C 0x03B4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2                          0x006C 0x03B4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35                        0x006C 0x03B4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
+#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
+#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX                          0x0070 0x03B8 0x0848 0x3 0x2
+#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX                          0x0070 0x03B8 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD                            0x0070 0x03B8 0x070C 0x7 0x0
+#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1                           0x0070 0x03B8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34                         0x0070 0x03B8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
+#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX                        0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX                        0x0074 0x03BC 0x0848 0x3 0x3
+#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                      0x0074 0x03BC 0x0784 0x7 0x2
+#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK                            0x0074 0x03BC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33                       0x0074 0x03BC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
+#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
+#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
+#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS                        0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS                        0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0                       0x0078 0x03C0 0x07F8 0x7 0x0
+#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3                          0x0078 0x03C0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36                        0x0078 0x03C0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_COL__ENET1_COL                            0x007C 0x03C4 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_COL__ENET2_MDC                            0x007C 0x03C4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC                      0x007C 0x03C4 0x0654 0x2 0x1
+#define MX6SX_PAD_ENET1_COL__UART1_RI_B                           0x007C 0x03C4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK                        0x007C 0x03C4 0x0828 0x4 0x1
+#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0                           0x007C 0x03C4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23                         0x007C 0x03C4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16                       0x007C 0x03C4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37                        0x007C 0x03C4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                   0x007C 0x03C4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET1_CRS                            0x0080 0x03C8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO                           0x0080 0x03C8 0x0770 0x1 0x1
+#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                      0x0080 0x03C8 0x0648 0x2 0x1
+#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B                          0x0080 0x03C8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK                           0x0080 0x03C8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1                           0x0080 0x03C8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22                         0x0080 0x03C8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17                       0x0080 0x03C8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36                        0x0080 0x03C8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                   0x0080 0x03C8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET1_MDC                            0x0084 0x03CC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET2_MDC                            0x0084 0x03CC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                     0x0084 0x03CC 0x0638 0x2 0x1
+#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT                       0x0084 0x03CC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT                            0x0084 0x03CC 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2                           0x0084 0x03CC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR                         0x0084 0x03CC 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_MDC__PWM7_OUT                             0x0084 0x03CC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO                          0x0088 0x03D0 0x0764 0x0 0x1
+#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO                          0x0088 0x03D0 0x0770 0x1 0x2
+#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK                         0x0088 0x03D0 0x0000 0x2 0x0
+#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT                      0x0088 0x03D0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT                           0x0088 0x03D0 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3                          0x0088 0x03D0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC                         0x0088 0x03D0 0x0860 0x6 0x1
+#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT                            0x0088 0x03D0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      0x008C 0x03D4 0x0768 0x0 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                 0x008C 0x03D4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                  0x008C 0x03D4 0x0658 0x2 0x1
+#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B                       0x008C 0x03D4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT                         0x008C 0x03D4 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4                        0x008C 0x03D4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21                      0x008C 0x03D4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                    0x008C 0x03D4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
+/*
+ * SION bit is necessary for ENET1_REF_CLK1 (ENET2_REF_CLK2 untested) if it is
+ * used as clock output of IMX6SX_CLK_ENET_REF (ENET1_TX_CLK) to e.g. supply a
+ * PHY in RMII mode. This configuration is valid if:
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK is set
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK unset
+ * It seems to be a silicon bug that in this configuration ENET1_TX reference
+ * clock isn't provided automatically.  According to i.MX6SX reference manual
+ * (IOMUXC_GPR_GPR1 field descriptions: ENET1_CLK_SEL, Rev. 0 from 2/2015) it
+ * should be the case.
+ * So this might have unwanted side effects for other hardware units that are
+ * also connected to that pin and using respective function as input (e.g.
+ * UART1's DTR handling on MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B).
+ */
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                      0x0090 0x03D8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5                        0x0090 0x03D8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20                      0x0090 0x03D8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                    0x0090 0x03D8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                     0x0090 0x03D8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28                0x0090 0x03D8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
+#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX                         0x0094 0x03DC 0x0830 0x3 0x2
+#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX                         0x0094 0x03DC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
+#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
+#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20                       0x0094 0x03DC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33                        0x0094 0x03DC 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                   0x0094 0x03DC 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
+#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
+#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX                         0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX                         0x0098 0x03E0 0x0830 0x3 0x3
+#define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
+#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
+#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21                       0x0098 0x03E0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32                        0x0098 0x03E0 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                   0x0098 0x03E0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS                     0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS                     0x009C 0x03E4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                    0x009C 0x03E4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                     0x009C 0x03E4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25                0x009C 0x03E4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS                     0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS                     0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                    0x00A0 0x03E8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                     0x00A0 0x03E8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
+#define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS                         0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS                         0x00A4 0x03EC 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
+#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
+#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1                      0x00A4 0x03EC 0x0820 0x6 0x1
+#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK                          0x00A4 0x03EC 0x0814 0x7 0x0
+#define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX                          0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX                          0x00A8 0x03F0 0x0858 0x2 0x2
+#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
+#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
+#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET                          0x00A8 0x03F0 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
+#define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
+#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS                         0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS                         0x00AC 0x03F4 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30                          0x00AC 0x03F4 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX                          0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX                          0x00B0 0x03F8 0x0850 0x2 0x2
+#define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28                          0x00B0 0x03F8 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2                            0x00B0 0x03F8 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL4__KPP_COL_4                             0x00B4 0x03FC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL4__ENET2_MDC                             0x00B4 0x03FC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL4__I2C3_SCL                              0x00B4 0x03FC 0x07B8 0x2 0x2
+#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL                           0x00B4 0x03FC 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC                       0x00B4 0x03FC 0x0664 0x4 0x0
+#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14                           0x00B4 0x03FC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL4__WEIM_CRE                              0x00B4 0x03FC 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS                         0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS                         0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
+#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
+#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                      0x00B8 0x0400 0x081C 0x6 0x1
+#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0                        0x00B8 0x0400 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX                          0x00BC 0x0404 0x0858 0x2 0x3
+#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX                          0x00BC 0x0404 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
+#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
+#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31                          0x00BC 0x0404 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0                        0x00BC 0x0404 0x080C 0x7 0x0
+#define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
+#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS                         0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS                         0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
+#define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
+#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29                          0x00C0 0x0408 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX                          0x00C4 0x040C 0x0850 0x2 0x3
+#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX                          0x00C4 0x040C 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
+#define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
+#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B                          0x00C4 0x040C 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1                            0x00C4 0x040C 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4                             0x00C8 0x0410 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO                            0x00C8 0x0410 0x0770 0x1 0x3
+#define MX6SX_PAD_KEY_ROW4__I2C3_SDA                              0x00C8 0x0410 0x07BC 0x2 0x2
+#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL                           0x00C8 0x0410 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                      0x00C8 0x0410 0x0668 0x4 0x0
+#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19                           0x00C8 0x0410 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                     0x00C8 0x0410 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC                          0x00C8 0x0410 0x0810 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK                            0x00CC 0x0414 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN                         0x00CC 0x0414 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                       0x00CC 0x0414 0x0634 0x2 0x1
+#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                  0x00CC 0x0414 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16                          0x00CC 0x0414 0x06DC 0x4 0x0
+#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0                            0x00CC 0x0414 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_CLK__USDHC1_WP                             0x00CC 0x0414 0x0868 0x6 0x0
+#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16                        0x00CC 0x0414 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0                           0x00CC 0x0414 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0                          0x00CC 0x0414 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0                      0x00D0 0x0418 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B                         0x00D0 0x0418 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0                         0x00D0 0x0418 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0                     0x00D0 0x0418 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20                       0x00D0 0x0418 0x06EC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1                         0x00D0 0x0418 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0                       0x00D0 0x0418 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21                     0x00D0 0x0418 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5                        0x00D0 0x0418 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5                       0x00D0 0x0418 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1                      0x00D4 0x041C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B                         0x00D4 0x041C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1                         0x00D4 0x041C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1                     0x00D4 0x041C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21                       0x00D4 0x041C 0x06F0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2                         0x00D4 0x041C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1                       0x00D4 0x041C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22                     0x00D4 0x041C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6                        0x00D4 0x041C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6                       0x00D4 0x041C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2                      0x00D8 0x0420 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B                         0x00D8 0x0420 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2                         0x00D8 0x0420 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2                     0x00D8 0x0420 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22                       0x00D8 0x0420 0x06F4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3                         0x00D8 0x0420 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2                       0x00D8 0x0420 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23                     0x00D8 0x0420 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7                        0x00D8 0x0420 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7                       0x00D8 0x0420 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3                      0x00DC 0x0424 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24                       0x00DC 0x0424 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3                         0x00DC 0x0424 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3                     0x00DC 0x0424 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23                       0x00DC 0x0424 0x06F8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4                         0x00DC 0x0424 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3                       0x00DC 0x0424 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24                     0x00DC 0x0424 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8                        0x00DC 0x0424 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8                       0x00DC 0x0424 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4                      0x00E0 0x0428 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25                       0x00E0 0x0428 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4                     0x00E0 0x0428 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC                         0x00E0 0x0428 0x0708 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5                         0x00E0 0x0428 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4                       0x00E0 0x0428 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25                     0x00E0 0x0428 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9                        0x00E0 0x0428 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9                       0x00E0 0x0428 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5                      0x00E4 0x042C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26                       0x00E4 0x042C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5                     0x00E4 0x042C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC                         0x00E4 0x042C 0x0700 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6                         0x00E4 0x042C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5                       0x00E4 0x042C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26                     0x00E4 0x042C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10                       0x00E4 0x042C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10                      0x00E4 0x042C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6                      0x00E8 0x0430 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2                        0x00E8 0x0430 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6                     0x00E8 0x0430 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK                        0x00E8 0x0430 0x0704 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7                         0x00E8 0x0430 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6                       0x00E8 0x0430 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27                     0x00E8 0x0430 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11                       0x00E8 0x0430 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11                      0x00E8 0x0430 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7                      0x00EC 0x0434 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3                        0x00EC 0x0434 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7                     0x00EC 0x0434 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK                          0x00EC 0x0434 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8                         0x00EC 0x0434 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7                       0x00EC 0x0434 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28                     0x00EC 0x0434 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12                       0x00EC 0x0434 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12                      0x00EC 0x0434 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8                      0x00F0 0x0438 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8                          0x00F0 0x0438 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8                     0x00F0 0x0438 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9                        0x00F0 0x0438 0x06C4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9                         0x00F0 0x0438 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8                       0x00F0 0x0438 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29                     0x00F0 0x0438 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13                       0x00F0 0x0438 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13                      0x00F0 0x0438 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9                      0x00F4 0x043C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9                          0x00F4 0x043C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9                     0x00F4 0x043C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8                        0x00F4 0x043C 0x06C0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10                        0x00F4 0x043C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9                       0x00F4 0x043C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30                     0x00F4 0x043C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14                       0x00F4 0x043C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14                      0x00F4 0x043C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10                     0x00F8 0x0440 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10                         0x00F8 0x0440 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10                    0x00F8 0x0440 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7                        0x00F8 0x0440 0x06BC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11                        0x00F8 0x0440 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10                      0x00F8 0x0440 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31                     0x00F8 0x0440 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15                       0x00F8 0x0440 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15                      0x00F8 0x0440 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11                     0x00FC 0x0444 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11                         0x00FC 0x0444 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11                    0x00FC 0x0444 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6                        0x00FC 0x0444 0x06B8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12                        0x00FC 0x0444 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11                      0x00FC 0x0444 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0                     0x00FC 0x0444 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16                       0x00FC 0x0444 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16                      0x00FC 0x0444 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12                     0x0100 0x0448 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12                         0x0100 0x0448 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12                    0x0100 0x0448 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5                        0x0100 0x0448 0x06B4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13                        0x0100 0x0448 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12                      0x0100 0x0448 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1                     0x0100 0x0448 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17                       0x0100 0x0448 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17                      0x0100 0x0448 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13                     0x0104 0x044C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13                         0x0104 0x044C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13                    0x0104 0x044C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4                        0x0104 0x044C 0x06B0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14                        0x0104 0x044C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13                      0x0104 0x044C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2                     0x0104 0x044C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18                       0x0104 0x044C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18                      0x0104 0x044C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14                     0x0108 0x0450 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14                         0x0108 0x0450 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14                    0x0108 0x0450 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3                        0x0108 0x0450 0x06AC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15                        0x0108 0x0450 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14                      0x0108 0x0450 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                    0x0108 0x0450 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19                       0x0108 0x0450 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19                      0x0108 0x0450 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15                     0x010C 0x0454 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15                         0x010C 0x0454 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15                    0x010C 0x0454 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2                        0x010C 0x0454 0x06A8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16                        0x010C 0x0454 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15                      0x010C 0x0454 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0                      0x010C 0x0454 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0                       0x010C 0x0454 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20                      0x010C 0x0454 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16                     0x0110 0x0458 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16                       0x0110 0x0458 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK                       0x0110 0x0458 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                   0x0110 0x0458 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1                        0x0110 0x0458 0x06A4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17                        0x0110 0x0458 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24                      0x0110 0x0458 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1                      0x0110 0x0458 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1                       0x0110 0x0458 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21                      0x0110 0x0458 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17                     0x0114 0x045C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17                       0x0114 0x045C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                   0x0114 0x045C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0                        0x0114 0x045C 0x06A0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18                        0x0114 0x045C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25                      0x0114 0x045C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2                      0x0114 0x045C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2                       0x0114 0x045C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22                      0x0114 0x045C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18                     0x0118 0x0460 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18                       0x0118 0x0460 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO                          0x0118 0x0460 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO                      0x0118 0x0460 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15                       0x0118 0x0460 0x06D8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19                        0x0118 0x0460 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26                      0x0118 0x0460 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3                      0x0118 0x0460 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3                       0x0118 0x0460 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23                      0x0118 0x0460 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19                     0x011C 0x0464 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19                       0x011C 0x0464 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO                       0x011C 0x0464 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14                       0x011C 0x0464 0x06D4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20                        0x011C 0x0464 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27                      0x011C 0x0464 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT                    0x011C 0x0464 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4                       0x011C 0x0464 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24                      0x011C 0x0464 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20                     0x0120 0x0468 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20                       0x0120 0x0468 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT                           0x0120 0x0468 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT              0x0120 0x0468 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13                       0x0120 0x0468 0x06D0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21                        0x0120 0x0468 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28                      0x0120 0x0468 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP                        0x0120 0x0468 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5                       0x0120 0x0468 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25                      0x0120 0x0468 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21                     0x0124 0x046C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21                       0x0124 0x046C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT                           0x0124 0x046C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT              0x0124 0x046C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12                       0x0124 0x046C 0x06CC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22                        0x0124 0x046C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29                      0x0124 0x046C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0                      0x0124 0x046C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6                       0x0124 0x046C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26                      0x0124 0x046C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22                     0x0128 0x0470 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22                       0x0128 0x0470 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT                           0x0128 0x0470 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT              0x0128 0x0470 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11                       0x0128 0x0470 0x06C8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23                        0x0128 0x0470 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30                      0x0128 0x0470 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1                      0x0128 0x0470 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7                       0x0128 0x0470 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27                      0x0128 0x0470 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23                     0x012C 0x0474 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23                       0x012C 0x0474 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT                           0x012C 0x0474 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT              0x012C 0x0474 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10                       0x012C 0x0474 0x06FC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24                        0x012C 0x0474 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31                      0x012C 0x0474 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2                      0x012C 0x0474 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8                       0x012C 0x0474 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28                      0x012C 0x0474 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE                      0x0130 0x0478 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E                        0x0130 0x0478 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                    0x0130 0x0478 0x063C 0x2 0x1
+#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN               0x0130 0x0478 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17                       0x0130 0x0478 0x06E0 0x4 0x0
+#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25                        0x0130 0x0478 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B                        0x0130 0x0478 0x0864 0x6 0x0
+#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17                     0x0130 0x0478 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1                        0x0130 0x0478 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1                       0x0130 0x0478 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC                        0x0134 0x047C 0x07E0 0x0 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS                           0x0134 0x047C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                     0x0134 0x047C 0x0630 0x2 0x1
+#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN                0x0134 0x047C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18                        0x0134 0x047C 0x06E4 0x4 0x0
+#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26                         0x0134 0x047C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP                           0x0134 0x047C 0x0870 0x6 0x0
+#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18                      0x0134 0x047C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2                         0x0134 0x047C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2                        0x0134 0x047C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET                        0x0138 0x0480 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS                           0x0138 0x0480 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                     0x0138 0x0480 0x062C 0x2 0x1
+#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI                       0x0138 0x0480 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_RESET__M4_EVENTI                           0x0138 0x0480 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27                         0x0138 0x0480 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY                        0x0138 0x0480 0x069C 0x6 0x0
+#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20                      0x0138 0x0480 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4                         0x0138 0x0480 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4                        0x0138 0x0480 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC                        0x013C 0x0484 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY                         0x013C 0x0484 0x07E0 0x1 0x1
+#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                    0x013C 0x0484 0x0640 0x2 0x1
+#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN                0x013C 0x0484 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19                        0x013C 0x0484 0x06E8 0x4 0x0
+#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28                         0x013C 0x0484 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B                         0x013C 0x0484 0x086C 0x6 0x0
+#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19                      0x013C 0x0484 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3                         0x013C 0x0484 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3                        0x013C 0x0484 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE                           0x0140 0x0488 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_ALE__I2C3_SDA                              0x0140 0x0488 0x07BC 0x1 0x0
+#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B                         0x0140 0x0488 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0                            0x0140 0x0488 0x072C 0x3 0x0
+#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2                          0x0140 0x0488 0x079C 0x4 0x0
+#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0                            0x0140 0x0488 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B                            0x0140 0x0488 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0                         0x0140 0x0488 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN             0x0140 0x0488 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12                      0x0140 0x0488 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B                       0x0144 0x048C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT                      0x0144 0x048C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2                      0x0144 0x048C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                     0x0144 0x048C 0x0654 0x3 0x0
+#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK                         0x0144 0x048C 0x078C 0x4 0x0
+#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1                          0x0144 0x048C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B                          0x0144 0x048C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3                       0x0144 0x048C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ          0x0144 0x048C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                     0x0144 0x048C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B                       0x0148 0x0490 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B                      0x0148 0x0490 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3                      0x0148 0x0490 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                     0x0148 0x0490 0x0648 0x3 0x0
+#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0                            0x0148 0x0490 0x0790 0x4 0x0
+#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2                          0x0148 0x0490 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE1_B__WEIM_OE                             0x0148 0x0490 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4                       0x0148 0x0490 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE      0x0148 0x0490 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                     0x0148 0x0490 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE                           0x014C 0x0494 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CLE__I2C3_SCL                              0x014C 0x0494 0x07B8 0x1 0x0
+#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK                          0x014C 0x0494 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK                           0x014C 0x0494 0x0720 0x3 0x0
+#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3                          0x014C 0x0494 0x0798 0x4 0x0
+#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3                            0x014C 0x0494 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CLE__WEIM_BCLK                             0x014C 0x0494 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CLE__TPSMP_CLK                             0x014C 0x0494 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP             0x014C 0x0494 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13                      0x014C 0x0494 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00                     0x0150 0x0498 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4                       0x0150 0x0498 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1                     0x0150 0x0498 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO                        0x0150 0x0498 0x0754 0x3 0x0
+#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK                        0x0150 0x0498 0x0788 0x4 0x0
+#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4                         0x0150 0x0498 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0                          0x0150 0x0498 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7                      0x0150 0x0498 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET  0x0150 0x0498 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5         0x0150 0x0498 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01                     0x0154 0x049C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5                       0x0154 0x049C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0                     0x0154 0x049C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI                        0x0154 0x049C 0x0758 0x3 0x0
+#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS                         0x0154 0x049C 0x0778 0x4 0x0
+#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5                         0x0154 0x049C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1                          0x0154 0x049C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8                      0x0154 0x049C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD      0x0154 0x049C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4         0x0154 0x049C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02                     0x0158 0x04A0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6                       0x0158 0x04A0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK                       0x0158 0x04A0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK                        0x0158 0x04A0 0x0750 0x3 0x0
+#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK                     0x0158 0x04A0 0x0784 0x4 0x0
+#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6                         0x0158 0x04A0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2                          0x0158 0x04A0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9                      0x0158 0x04A0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV   0x0158 0x04A0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3         0x0158 0x04A0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03                     0x015C 0x04A4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7                       0x015C 0x04A4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B                      0x015C 0x04A4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0                         0x015C 0x04A4 0x075C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK                     0x015C 0x04A4 0x0780 0x4 0x0
+#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7                         0x015C 0x04A4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3                          0x015C 0x04A4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10                     0x015C 0x04A4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH     0x015C 0x04A4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6         0x015C 0x04A4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS                      0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS                      0x0160 0x04A8 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
+#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11                     0x0160 0x04A8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH     0x0160 0x04A8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0            0x0160 0x04A8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS                      0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS                      0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
+#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12                     0x0164 0x04AC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET  0x0164 0x04AC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1            0x0164 0x04AC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX                       0x0168 0x04B0 0x0840 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX                       0x0168 0x04B0 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13                     0x0168 0x04B0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD      0x0168 0x04B0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2            0x0168 0x04B0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX                       0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX                       0x016C 0x04B4 0x0840 0x3 0x1
+#define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14                     0x016C 0x04B4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD      0x016C 0x04B4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3            0x016C 0x04B4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B                         0x0170 0x04B8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B                       0x0170 0x04B8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3                       0x0170 0x04B8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                     0x0170 0x04B8 0x0658 0x3 0x0
+#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS                           0x0170 0x04B8 0x077C 0x4 0x0
+#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12                          0x0170 0x04B8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_RE_B__WEIM_RW                              0x0170 0x04B8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5                        0x0170 0x04B8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD        0x0170 0x04B8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                      0x0170 0x04B8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B                   0x0174 0x04BC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT                    0x0174 0x04BC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1                    0x0174 0x04BC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO                       0x0174 0x04BC 0x0724 0x3 0x0
+#define MX6SX_PAD_NAND_READY_B__ESAI_TX1                          0x0174 0x04BC 0x0794 0x4 0x0
+#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13                       0x0174 0x04BC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1                       0x0174 0x04BC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2                     0x0174 0x04BC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN         0x0174 0x04BC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                  0x0174 0x04BC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B                         0x0178 0x04C0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT                       0x0178 0x04C0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2                       0x0178 0x04C0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                      0x0178 0x04C0 0x0644 0x3 0x0
+#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0                         0x0178 0x04C0 0x07A4 0x4 0x0
+#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14                          0x0178 0x04C0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT                            0x0178 0x04C0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6                        0x0178 0x04C0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV     0x0178 0x04C0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                      0x0178 0x04C0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B                         0x017C 0x04C4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B                       0x017C 0x04C4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0                       0x017C 0x04C4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI                          0x017C 0x04C4 0x0728 0x3 0x0
+#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1                         0x017C 0x04C4 0x07A0 0x4 0x0
+#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15                          0x017C 0x04C4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0                          0x017C 0x04C4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1                        0x017C 0x04C4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE       0x017C 0x04C4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                     0x017C 0x04C4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                    0x0180 0x04C8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC                       0x0180 0x04C8 0x085C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI                       0x0180 0x04C8 0x0718 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                      0x0180 0x04C8 0x07A0 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14                      0x0180 0x04C8 0x06D4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16                       0x0180 0x04C8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6                       0x0180 0x04C8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                     0x0180 0x04C8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3           0x0180 0x04C8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                    0x0184 0x04CC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                    0x0184 0x04CC 0x0624 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO                       0x0184 0x04CC 0x0714 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1                          0x0184 0x04CC 0x0794 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13                      0x0184 0x04CC 0x06D0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17                       0x0184 0x04CC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5                       0x0184 0x04CC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                     0x0184 0x04CC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                   0x0184 0x04CC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                    0x0188 0x04D0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR                      0x0188 0x04D0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1                        0x0188 0x04D0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK                       0x0188 0x04D0 0x078C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12                      0x0188 0x04D0 0x06CC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18                       0x0188 0x04D0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4                       0x0188 0x04D0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                     0x0188 0x04D0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                   0x0188 0x04D0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                    0x018C 0x04D4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC                       0x018C 0x04D4 0x0860 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2                        0x018C 0x04D4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0                          0x018C 0x04D4 0x0790 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11                      0x018C 0x04D4 0x06C8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19                       0x018C 0x04D4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3                       0x018C 0x04D4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                     0x018C 0x04D4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                   0x018C 0x04D4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS                         0x0190 0x04D8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX                             0x0190 0x04D8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2                           0x0190 0x04D8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI                         0x0190 0x04D8 0x0758 0x3 0x1
+#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15                        0x0190 0x04D8 0x06D8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20                         0x0190 0x04D8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7                         0x0190 0x04D8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13                      0x0190 0x04D8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4             0x0190 0x04D8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                       0x0194 0x04DC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                     0x0194 0x04DC 0x0628 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK                        0x0194 0x04DC 0x0710 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                       0x0194 0x04DC 0x0798 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1                        0x0194 0x04DC 0x06A4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21                        0x0194 0x04DC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0                        0x0194 0x04DC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                      0x0194 0x04DC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                    0x0194 0x04DC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                     0x0198 0x04E0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                      0x0198 0x04E0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0                        0x0198 0x04E0 0x071C 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                      0x0198 0x04E0 0x079C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0                       0x0198 0x04E0 0x06A0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22                       0x0198 0x04E0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1                       0x0198 0x04E0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                     0x0198 0x04E0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                   0x0198 0x04E0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                     0x019C 0x04E4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX                           0x019C 0x04E4 0x068C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1                         0x019C 0x04E4 0x0694 0x2 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO                       0x019C 0x04E4 0x0754 0x3 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10                      0x019C 0x04E4 0x06FC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23                       0x019C 0x04E4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2                       0x019C 0x04E4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS                     0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS                     0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24                       0x01A0 0x04E8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS                     0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS                     0x01A4 0x04EC 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25                       0x01A4 0x04EC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13                      0x01A4 0x04EC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                     0x01A4 0x04EC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                    0x01A8 0x04F0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA                          0x01A8 0x04F0 0x07B4 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY                        0x01A8 0x04F0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                      0x01A8 0x04F0 0x07A4 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20                      0x01A8 0x04F0 0x06EC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26                       0x01A8 0x04F0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12                      0x01A8 0x04F0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                     0x01A8 0x04F0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                    0x01AC 0x04F4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL                          0x01AC 0x04F4 0x07B0 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3                        0x01AC 0x04F4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS                        0x01AC 0x04F4 0x077C 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19                      0x01AC 0x04F4 0x06E8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27                       0x01AC 0x04F4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11                      0x01AC 0x04F4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                     0x01AC 0x04F4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS                         0x01B0 0x04F8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX                             0x01B0 0x04F8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1                           0x01B0 0x04F8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0                          0x01B0 0x04F8 0x075C 0x3 0x1
+#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23                        0x01B0 0x04F8 0x06F8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28                         0x01B0 0x04F8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX                       0x01B4 0x04FC 0x0840 0x1 0x4
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX                       0x01B4 0x04FC 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
+#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29                        0x01B4 0x04FC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX                      0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX                      0x01B8 0x0500 0x0840 0x1 0x5
+#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
+#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30                       0x01B8 0x0500 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9                       0x01B8 0x0500 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                    0x01B8 0x0500 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                     0x01BC 0x0504 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX                           0x01BC 0x0504 0x0690 0x1 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2                         0x01BC 0x0504 0x0698 0x2 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                       0x01BC 0x0504 0x0750 0x3 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18                      0x01BC 0x0504 0x06E4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31                       0x01BC 0x0504 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10                      0x01BC 0x0504 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                    0x01BC 0x0504 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0                     0x01C0 0x0508 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0                          0x01C0 0x0508 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10                        0x01C0 0x0508 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0                      0x01C0 0x0508 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER              0x01C0 0x0508 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                   0x01C0 0x0508 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1                     0x01C4 0x050C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1                          0x01C4 0x050C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11                        0x01C4 0x050C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1                      0x01C4 0x050C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER               0x01C4 0x050C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                   0x01C4 0x050C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2                     0x01C8 0x0510 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2                          0x01C8 0x0510 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12                        0x01C8 0x0510 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2                      0x01C8 0x0510 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER               0x01C8 0x0510 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                   0x01C8 0x0510 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3                     0x01CC 0x0514 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3                          0x01CC 0x0514 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13                        0x01CC 0x0514 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3                      0x01CC 0x0514 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER               0x01CC 0x0514 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                   0x01CC 0x0514 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN                      0x01D0 0x0518 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4                       0x01D0 0x0518 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14                     0x01D0 0x0518 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                   0x01D0 0x0518 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER            0x01D0 0x0518 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4                0x01D0 0x0518 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK                        0x01D4 0x051C 0x0768 0x0 0x1
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER                         0x01D4 0x051C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5                          0x01D4 0x051C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15                        0x01D4 0x051C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1                      0x01D4 0x051C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER               0x01D4 0x051C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                   0x01D4 0x051C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0                     0x01D8 0x0520 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC                        0x01D8 0x0520 0x0810 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6                          0x01D8 0x0520 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16                        0x01D8 0x0520 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2                      0x01D8 0x0520 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER               0x01D8 0x0520 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                   0x01D8 0x0520 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1                     0x01DC 0x0524 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK                        0x01DC 0x0524 0x0808 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7                          0x01DC 0x0524 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17                        0x01DC 0x0524 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3                      0x01DC 0x0524 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER               0x01DC 0x0524 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                   0x01DC 0x0524 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2                     0x01E0 0x0528 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC                        0x01E0 0x0528 0x0818 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8                          0x01E0 0x0528 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18                        0x01E0 0x0528 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4                      0x01E0 0x0528 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER               0x01E0 0x0528 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                   0x01E0 0x0528 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3                     0x01E4 0x052C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK                        0x01E4 0x052C 0x0814 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9                          0x01E4 0x052C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19                        0x01E4 0x052C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5                      0x01E4 0x052C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER               0x01E4 0x052C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                   0x01E4 0x052C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN                      0x01E8 0x0530 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                   0x01E8 0x0530 0x080C 0x2 0x1
+#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10                      0x01E8 0x0530 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0                      0x01E8 0x0530 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                   0x01E8 0x0530 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER             0x01E8 0x0530 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10               0x01E8 0x0530 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC                     0x01EC 0x0534 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER                         0x01EC 0x0534 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0                      0x01EC 0x0534 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11                         0x01EC 0x0534 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1                         0x01EC 0x0534 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7                      0x01EC 0x0534 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER                0x01EC 0x0534 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                  0x01EC 0x0534 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0                     0x01F0 0x0538 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT                            0x01F0 0x0538 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12                         0x01F0 0x0538 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2                         0x01F0 0x0538 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8                      0x01F0 0x0538 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18                       0x01F0 0x0538 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                  0x01F0 0x0538 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1                     0x01F4 0x053C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT                            0x01F4 0x053C 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13                         0x01F4 0x053C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3                         0x01F4 0x053C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9                      0x01F4 0x053C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19                       0x01F4 0x053C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                  0x01F4 0x053C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2                     0x01F8 0x0540 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT                            0x01F8 0x0540 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14                         0x01F8 0x0540 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4                         0x01F8 0x0540 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10                     0x01F8 0x0540 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20                       0x01F8 0x0540 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                  0x01F8 0x0540 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3                     0x01FC 0x0544 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT                            0x01FC 0x0544 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15                         0x01FC 0x0544 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5                         0x01FC 0x0544 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11                     0x01FC 0x0544 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21                       0x01FC 0x0544 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                  0x01FC 0x0544 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN                      0x0200 0x0548 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16                      0x0200 0x0548 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6                      0x0200 0x0548 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                  0x0200 0x0548 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                    0x0200 0x0548 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16               0x0200 0x0548 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK                        0x0204 0x054C 0x0774 0x0 0x1
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER                         0x0204 0x054C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17                         0x0204 0x054C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7                         0x0204 0x054C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13                     0x0204 0x054C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23                       0x0204 0x054C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                  0x0204 0x054C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0                     0x0208 0x0550 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC                        0x0208 0x0550 0x07FC 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT                            0x0208 0x0550 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18                         0x0208 0x0550 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8                         0x0208 0x0550 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14                     0x0208 0x0550 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24                       0x0208 0x0550 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                  0x0208 0x0550 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1                     0x020C 0x0554 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK                        0x020C 0x0554 0x07F4 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT                            0x020C 0x0554 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19                         0x020C 0x0554 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9                         0x020C 0x0554 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15                     0x020C 0x0554 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25                       0x020C 0x0554 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                  0x020C 0x0554 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2                     0x0210 0x0558 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC                        0x0210 0x0558 0x0804 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT                            0x0210 0x0558 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20                         0x0210 0x0558 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC                          0x0210 0x0558 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL                            0x0210 0x0558 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26                       0x0210 0x0558 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                  0x0210 0x0558 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3                     0x0214 0x055C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK                        0x0214 0x055C 0x0800 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT                            0x0214 0x055C 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21                         0x0214 0x055C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC                          0x0214 0x055C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT                        0x0214 0x055C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27                       0x0214 0x055C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                  0x0214 0x055C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN                      0x0218 0x0560 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                   0x0218 0x0560 0x07F8 0x2 0x1
+#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22                      0x0218 0x0560 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD                       0x0218 0x0560 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B                         0x0218 0x0560 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                    0x0218 0x0560 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22               0x0218 0x0560 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC                     0x021C 0x0564 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER                         0x021C 0x0564 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0                      0x021C 0x0564 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23                         0x021C 0x0564 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK                         0x021C 0x0564 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TXC__SJC_DONE                            0x021C 0x0564 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29                       0x021C 0x0564 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                  0x021C 0x0564 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CLK__USDHC1_CLK                             0x0220 0x0568 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                       0x0220 0x0568 0x0668 0x1 0x1
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B                           0x0220 0x0568 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CLK__GPT_CLK                                0x0220 0x0568 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                   0x0220 0x0568 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0                             0x0220 0x0568 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                  0x0220 0x0568 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CLK__CCM_OUT1                               0x0220 0x0568 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK                      0x0220 0x0568 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45                          0x0220 0x0568 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CMD__USDHC1_CMD                             0x0224 0x056C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC                        0x0224 0x056C 0x0664 0x1 0x1
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B                           0x0224 0x056C 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1                           0x0224 0x056C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                   0x0224 0x056C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1                             0x0224 0x056C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                   0x0224 0x056C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CMD__CCM_CLKO1                              0x0224 0x056C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK                        0x0224 0x056C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46                          0x0224 0x056C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0                         0x0228 0x0570 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX                         0x0228 0x0570 0x0838 0x4 0x2
+#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX                         0x0228 0x0570 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP                        0x0228 0x0570 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48                        0x0228 0x0570 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1                         0x022C 0x0574 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX                         0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX                         0x022C 0x0574 0x0838 0x4 0x3
+#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN                      0x022C 0x0574 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47                        0x022C 0x0574 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2                         0x0230 0x0578 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
+#define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS                        0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS                        0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N                        0x0230 0x0578 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3                         0x0234 0x057C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
+#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS                        0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS                        0x0234 0x057C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
+#define MX6SX_PAD_SD1_DATA3__VADC_RST_N                           0x0234 0x057C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__USDHC2_CLK                             0x0238 0x0580 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                       0x0238 0x0580 0x0680 0x1 0x2
+#define MX6SX_PAD_SD2_CLK__KPP_COL_5                              0x0238 0x0580 0x07C8 0x2 0x1
+#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK                            0x0238 0x0580 0x0740 0x3 0x1
+#define MX6SX_PAD_SD2_CLK__MLB_SIG                                0x0238 0x0580 0x07F0 0x4 0x2
+#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6                             0x0238 0x0580 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CLK__MQS_RIGHT                              0x0238 0x0580 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY                         0x0238 0x0580 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                   0x0238 0x0580 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29                          0x0238 0x0580 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_CMD__USDHC2_CMD                             0x023C 0x0584 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC                        0x023C 0x0584 0x067C 0x1 0x2
+#define MX6SX_PAD_SD2_CMD__KPP_ROW_5                              0x023C 0x0584 0x07D4 0x2 0x1
+#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI                            0x023C 0x0584 0x0748 0x3 0x1
+#define MX6SX_PAD_SD2_CMD__MLB_CLK                                0x023C 0x0584 0x07E8 0x4 0x2
+#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7                             0x023C 0x0584 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CMD__MQS_LEFT                               0x023C 0x0584 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B                           0x023C 0x0584 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                   0x023C 0x0584 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30                          0x023C 0x0584 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0                         0x0240 0x0588 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                      0x0240 0x0588 0x0674 0x1 0x2
+#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7                            0x0240 0x0588 0x07DC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA0__PWM1_OUT                             0x0240 0x0588 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
+#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX                         0x0240 0x0588 0x0848 0x7 0x4
+#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX                         0x0240 0x0588 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                      0x0244 0x058C 0x0684 0x1 0x2
+#define MX6SX_PAD_SD2_DATA1__KPP_COL_7                            0x0244 0x058C 0x07D0 0x2 0x1
+#define MX6SX_PAD_SD2_DATA1__PWM2_OUT                             0x0244 0x058C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
+#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX                         0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX                         0x0244 0x058C 0x0848 0x7 0x5
+#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                     0x0248 0x0590 0x0688 0x1 0x2
+#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6                            0x0248 0x0590 0x07D8 0x2 0x1
+#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0                           0x0248 0x0590 0x074C 0x3 0x1
+#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
+#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX                         0x0248 0x0590 0x0858 0x7 0x4
+#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX                         0x0248 0x0590 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                      0x024C 0x0594 0x0678 0x1 0x2
+#define MX6SX_PAD_SD2_DATA3__KPP_COL_6                            0x024C 0x0594 0x07CC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO                          0x024C 0x0594 0x0744 0x3 0x1
+#define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
+#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
+#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX                         0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX                         0x024C 0x0594 0x0858 0x7 0x5
+#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS                          0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS                          0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
+#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0                             0x0250 0x0598 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY                            0x0250 0x0598 0x07E4 0x6 0x0
+#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX                           0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX                           0x0254 0x059C 0x0848 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
+#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
+#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1                             0x0254 0x059C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_RS                              0x0254 0x059C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28                         0x0254 0x059C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4             0x0254 0x059C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0                         0x0258 0x05A0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA0__I2C4_SCL                             0x0258 0x05A0 0x07C0 0x1 0x0
+#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1                           0x0258 0x05A0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                      0x0258 0x05A0 0x0674 0x3 0x0
+#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1                        0x0258 0x05A0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2                           0x0258 0x05A0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT                            0x0258 0x05A0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30                       0x0258 0x05A0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0                          0x0258 0x05A0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0           0x0258 0x05A0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1                         0x025C 0x05A4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA1__I2C4_SDA                             0x025C 0x05A4 0x07C4 0x1 0x0
+#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2                           0x025C 0x05A4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                      0x025C 0x05A4 0x0684 0x3 0x0
+#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0                        0x025C 0x05A4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3                           0x025C 0x05A4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT                            0x025C 0x05A4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31                       0x025C 0x05A4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS                        0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS                        0x0260 0x05A8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
+#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4                           0x0260 0x05A8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN                        0x0260 0x05A8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26                       0x0260 0x05A8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX                         0x0264 0x05AC 0x0848 0x1 0x1
+#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX                         0x0264 0x05AC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
+#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5                           0x0264 0x05AC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E                          0x0264 0x05AC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27                       0x0264 0x05AC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3                          0x0264 0x05AC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3           0x0264 0x05AC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
+#define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
+#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX                         0x0268 0x05B0 0x0840 0x3 0x2
+#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX                         0x0268 0x05B0 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1                       0x0268 0x05B0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4                          0x0268 0x05B0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0              0x0268 0x05B0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX                         0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX                         0x026C 0x05B4 0x0840 0x3 0x3
+#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE                         0x026C 0x05B4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5                          0x026C 0x05B4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1              0x026C 0x05B4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS                        0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS                        0x0270 0x05B8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0                       0x0270 0x05B8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7                          0x0270 0x05B8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7           0x0270 0x05B8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
+#define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS                        0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS                        0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR                      0x0274 0x05BC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6                          0x0274 0x05BC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2           0x0274 0x05BC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CLK__USDHC4_CLK                             0x0278 0x05C0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15                         0x0278 0x05C0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO                            0x0278 0x05C0 0x0724 0x2 0x1
+#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                       0x0278 0x05C0 0x0638 0x3 0x0
+#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13                         0x0278 0x05C0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12                            0x0278 0x05C0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2                             0x0278 0x05C0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20                         0x0278 0x05C0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12                          0x0278 0x05C0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL           0x0278 0x05C0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CMD__USDHC4_CMD                             0x027C 0x05C4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14                         0x027C 0x05C4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI                            0x027C 0x05C4 0x0728 0x2 0x1
+#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC                        0x027C 0x05C4 0x0634 0x3 0x0
+#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14                         0x027C 0x05C4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13                            0x027C 0x05C4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1                             0x027C 0x05C4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19                         0x027C 0x05C4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11                          0x027C 0x05C4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                    0x027C 0x05C4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0                         0x0280 0x05C8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10                       0x0280 0x05C8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0                           0x0280 0x05C8 0x072C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                      0x0280 0x05C8 0x062C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12                       0x0280 0x05C8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14                          0x0280 0x05C8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3                           0x0280 0x05C8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21                       0x0280 0x05C8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13                        0x0280 0x05C8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE                      0x0280 0x05C8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1                         0x0284 0x05CC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11                       0x0284 0x05CC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK                          0x0284 0x05CC 0x0720 0x2 0x1
+#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                      0x0284 0x05CC 0x063C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11                       0x0284 0x05CC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15                          0x0284 0x05CC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY                           0x0284 0x05CC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22                       0x0284 0x05CC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14                        0x0284 0x05CC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                 0x0284 0x05CC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2                         0x0288 0x05D0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12                       0x0288 0x05D0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA2__I2C2_SDA                             0x0288 0x05D0 0x07B4 0x2 0x0
+#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                     0x0288 0x05D0 0x0640 0x3 0x0
+#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10                       0x0288 0x05D0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16                          0x0288 0x05D0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3                           0x0288 0x05D0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23                       0x0288 0x05D0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15                        0x0288 0x05D0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                   0x0288 0x05D0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3                         0x028C 0x05D4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13                       0x028C 0x05D4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA3__I2C2_SCL                             0x028C 0x05D4 0x07B0 0x2 0x0
+#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                      0x028C 0x05D4 0x0630 0x3 0x0
+#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9                        0x028C 0x05D4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17                          0x028C 0x05D4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY                           0x028C 0x05D4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24                       0x028C 0x05D4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16                        0x028C 0x05D4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX                         0x0290 0x05D8 0x0850 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX                         0x0290 0x05D8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
+#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT                            0x0290 0x05D8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16                       0x0290 0x05D8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE                    0x0290 0x05D8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX                         0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX                         0x0294 0x05DC 0x0850 0x2 0x1
+#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
+#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA5__SPDIF_IN                             0x0294 0x05DC 0x0824 0x6 0x0
+#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17                       0x0294 0x05DC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9                         0x0294 0x05DC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS                        0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS                        0x0298 0x05E0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
+#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_WP                            0x0298 0x05E0 0x0878 0x6 0x0
+#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18                       0x0298 0x05E0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10                        0x0298 0x05E0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS                        0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS                        0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B                          0x029C 0x05E4 0x0874 0x6 0x0
+#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15                       0x029C 0x05E4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                     0x029C 0x05E4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                     0x029C 0x05E4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B                     0x02A0 0x05E8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS                        0x02A0 0x05E8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET                       0x02A0 0x05E8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK                        0x02A0 0x05E8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET                       0x02A0 0x05E8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22                        0x02A0 0x05E8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS                          0x02A0 0x05E8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25                     0x02A0 0x05E8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17                      0x02A0 0x05E8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2            0x02A0 0x05E8 0x0000 0x9 0x0
+#define MX6SX_PAD_USB_H_DATA__USB_H_DATA                          0x02A4 0x05EC 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_DATA__PWM2_OUT                            0x02A4 0x05EC 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT                      0x02A4 0x05EC 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_DATA__I2C4_SDA                            0x02A4 0x05EC 0x07C4 0x3 0x1
+#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B                        0x02A4 0x05EC 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10                         0x02A4 0x05EC 0x0000 0x5 0x0
+#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE                      0x02A8 0x05F0 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT                          0x02A8 0x05F0 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT                    0x02A8 0x05F0 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL                          0x02A8 0x05F0 0x07C0 0x3 0x1
+#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
+
+/* these are not supposed to be used any more and remove them after some time */
+#define MX6SX_PAD_GPIO1_IO04__UART1_RX		MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX
+#define MX6SX_PAD_GPIO1_IO04__UART1_TX		MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX
+#define MX6SX_PAD_GPIO1_IO05__UART1_RX		MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX
+#define MX6SX_PAD_GPIO1_IO05__UART1_TX		MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART2_RX		MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX
+#define MX6SX_PAD_GPIO1_IO06__UART2_TX		MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B	MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO07__UART2_RX		MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX
+#define MX6SX_PAD_GPIO1_IO07__UART2_TX		MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B	MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS
+#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B	MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B	MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS
+#define MX6SX_PAD_CSI_DATA04__UART6_RX		MX6SX_PAD_CSI_DATA04__UART6_DCE_RX
+#define MX6SX_PAD_CSI_DATA04__UART6_TX		MX6SX_PAD_CSI_DATA04__UART6_DTE_TX
+#define MX6SX_PAD_CSI_DATA05__UART6_RX		MX6SX_PAD_CSI_DATA05__UART6_DTE_RX
+#define MX6SX_PAD_CSI_DATA05__UART6_TX		MX6SX_PAD_CSI_DATA05__UART6_DCE_TX
+#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B	MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B	MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS
+#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B	MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS
+#define MX6SX_PAD_CSI_MCLK__UART4_RX		MX6SX_PAD_CSI_MCLK__UART4_DCE_RX
+#define MX6SX_PAD_CSI_MCLK__UART4_TX		MX6SX_PAD_CSI_MCLK__UART4_DTE_TX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_RX		MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_TX		MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B	MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS
+#define MX6SX_PAD_ENET2_COL__UART1_RX		MX6SX_PAD_ENET2_COL__UART1_DCE_RX
+#define MX6SX_PAD_ENET2_COL__UART1_TX		MX6SX_PAD_ENET2_COL__UART1_DTE_TX
+#define MX6SX_PAD_ENET2_CRS__UART1_RX		MX6SX_PAD_ENET2_CRS__UART1_DTE_RX
+#define MX6SX_PAD_ENET2_CRS__UART1_TX		MX6SX_PAD_ENET2_CRS__UART1_DCE_TX
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B	MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B	MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS
+#define MX6SX_PAD_KEY_COL0__UART6_RTS_B		MX6SX_PAD_KEY_COL0__UART6_DCE_RTS
+#define MX6SX_PAD_KEY_COL1__UART6_RX		MX6SX_PAD_KEY_COL1__UART6_DTE_RX
+#define MX6SX_PAD_KEY_COL1__UART6_TX		MX6SX_PAD_KEY_COL1__UART6_DCE_TX
+#define MX6SX_PAD_KEY_COL2__UART5_RTS_B		MX6SX_PAD_KEY_COL2__UART5_DCE_RTS
+#define MX6SX_PAD_KEY_COL3__UART5_RX		MX6SX_PAD_KEY_COL3__UART5_DTE_RX
+#define MX6SX_PAD_KEY_COL3__UART5_TX		MX6SX_PAD_KEY_COL3__UART5_DCE_TX
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B		MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS
+#define MX6SX_PAD_KEY_ROW1__UART6_RX		MX6SX_PAD_KEY_ROW1__UART6_DCE_RX
+#define MX6SX_PAD_KEY_ROW1__UART6_TX		MX6SX_PAD_KEY_ROW1__UART6_DTE_TX
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B		MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS
+#define MX6SX_PAD_KEY_ROW3__UART5_RX		MX6SX_PAD_KEY_ROW3__UART5_DCE_RX
+#define MX6SX_PAD_KEY_ROW3__UART5_TX		MX6SX_PAD_KEY_ROW3__UART5_DTE_TX
+#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B	MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B	MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS
+#define MX6SX_PAD_NAND_DATA06__UART3_RX		MX6SX_PAD_NAND_DATA06__UART3_DCE_RX
+#define MX6SX_PAD_NAND_DATA06__UART3_TX		MX6SX_PAD_NAND_DATA06__UART3_DTE_TX
+#define MX6SX_PAD_NAND_DATA07__UART3_RX		MX6SX_PAD_NAND_DATA07__UART3_DTE_RX
+#define MX6SX_PAD_NAND_DATA07__UART3_TX		MX6SX_PAD_NAND_DATA07__UART3_DCE_TX
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B	MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B	MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX		MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX		MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX
+#define MX6SX_PAD_SD1_DATA0__UART2_RX		MX6SX_PAD_SD1_DATA0__UART2_DCE_RX
+#define MX6SX_PAD_SD1_DATA0__UART2_TX		MX6SX_PAD_SD1_DATA0__UART2_DTE_TX
+#define MX6SX_PAD_SD1_DATA1__UART2_RX		MX6SX_PAD_SD1_DATA1__UART2_DTE_RX
+#define MX6SX_PAD_SD1_DATA1__UART2_TX		MX6SX_PAD_SD1_DATA1__UART2_DCE_TX
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B	MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS
+#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B	MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS
+#define MX6SX_PAD_SD2_DATA0__UART4_RX		MX6SX_PAD_SD2_DATA0__UART4_DCE_RX
+#define MX6SX_PAD_SD2_DATA0__UART4_TX		MX6SX_PAD_SD2_DATA0__UART4_DTE_TX
+#define MX6SX_PAD_SD2_DATA1__UART4_RX		MX6SX_PAD_SD2_DATA1__UART4_DTE_RX
+#define MX6SX_PAD_SD2_DATA1__UART4_TX		MX6SX_PAD_SD2_DATA1__UART4_DCE_TX
+#define MX6SX_PAD_SD2_DATA2__UART6_RX		MX6SX_PAD_SD2_DATA2__UART6_DCE_RX
+#define MX6SX_PAD_SD2_DATA2__UART6_TX		MX6SX_PAD_SD2_DATA2__UART6_DTE_TX
+#define MX6SX_PAD_SD2_DATA3__UART6_RX		MX6SX_PAD_SD2_DATA3__UART6_DTE_RX
+#define MX6SX_PAD_SD2_DATA3__UART6_TX		MX6SX_PAD_SD2_DATA3__UART6_DCE_TX
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B		MX6SX_PAD_SD3_CLK__UART4_DCE_CTS
+#define MX6SX_PAD_SD3_CMD__UART4_RX		MX6SX_PAD_SD3_CMD__UART4_DTE_RX
+#define MX6SX_PAD_SD3_CMD__UART4_TX		MX6SX_PAD_SD3_CMD__UART4_DCE_TX
+#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B	MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS
+#define MX6SX_PAD_SD3_DATA3__UART4_RX		MX6SX_PAD_SD3_DATA3__UART4_DCE_RX
+#define MX6SX_PAD_SD3_DATA3__UART4_TX		MX6SX_PAD_SD3_DATA3__UART4_DTE_TX
+#define MX6SX_PAD_SD3_DATA4__UART3_RX		MX6SX_PAD_SD3_DATA4__UART3_DCE_RX
+#define MX6SX_PAD_SD3_DATA4__UART3_TX		MX6SX_PAD_SD3_DATA4__UART3_DTE_TX
+#define MX6SX_PAD_SD3_DATA5__UART3_RX		MX6SX_PAD_SD3_DATA5__UART3_DTE_RX
+#define MX6SX_PAD_SD3_DATA5__UART3_TX		MX6SX_PAD_SD3_DATA5__UART3_DCE_TX
+#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B	MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B	MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS
+#define MX6SX_PAD_SD4_DATA4__UART5_RX		MX6SX_PAD_SD4_DATA4__UART5_DCE_RX
+#define MX6SX_PAD_SD4_DATA4__UART5_TX		MX6SX_PAD_SD4_DATA4__UART5_DTE_TX
+#define MX6SX_PAD_SD4_DATA5__UART5_RX		MX6SX_PAD_SD4_DATA5__UART5_DTE_RX
+#define MX6SX_PAD_SD4_DATA5__UART5_TX		MX6SX_PAD_SD4_DATA5__UART5_DCE_TX
+#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B	MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B	MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS
+
+#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi
new file mode 100644
index 000000000..549461df7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi1 {
+	num-cs = <2>;
+
+	flash0: n25q256a@0 {
+		compatible = "jedec,spi-nor";
+	};
+
+	flash1: n25q256a@1 {
+		compatible = "jedec,spi-nor";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-sabreauto.dts b/roms/u-boot/arch/arm/dts/imx6sx-sabreauto.dts
new file mode 100644
index 000000000..9643d1fe0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-sabreauto.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX Sabre Auto Board";
+	compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc_sd3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_vcc_sd3>;
+			regulator-name = "VCC_SD3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+};
+
+&i2c3 {
+        clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	max7310_a: gpio@30 {
+		compatible = "maxim,max7310";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	max7310_b: gpio@32 {
+		compatible = "maxim,max7310";
+		reg = <0x32>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_1>;
+	status = "okay";
+	ddrsmp=<2>;
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <0>;
+	};
+
+	flash1: n25q256a@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	imx6x-sabreauto {
+		pinctrl_i2c2_1: i2c2grp-1 {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO03__I2C2_SDA          0x4001b8b1
+				MX6SX_PAD_GPIO1_IO02__I2C2_SCL          0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3_2: i2c3grp-2 {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA            0x4001b8b1
+				MX6SX_PAD_KEY_COL4__I2C3_SCL            0x4001b8b1
+			>;
+		};
+
+		pinctrl_qspi1_1: qspi1grp_1 {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0  0x70a1
+				MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1  0x70a1
+				MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2  0x70a1
+				MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3  0x70a1
+				MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK     0x70a1
+				MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B   0x70a1
+				MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0  0x70a1
+				MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1  0x70a1
+				MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2  0x70a1
+				MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3  0x70a1
+				MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK     0x70a1
+				MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B   0x70a1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-sdb.dts b/roms/u-boot/arch/arm/dts/imx6sx-sdb.dts
new file mode 100644
index 000000000..5a63ca615
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-sdb.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB RevB Board";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze200";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi2>;
+	status = "okay";
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+
+	flash1: n25q256a@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <2>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_can_stby {
+	/* Transceiver EN/STBY is active low on RevB board */
+	gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-sdb.dtsi b/roms/u-boot/arch/arm/dts/imx6sx-sdb.dtsi
new file mode 100644
index 000000000..f6972deb5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-sdb.dtsi
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB Board";
+	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_psu_5v: regulator-psu-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "PSU-5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio3 27 0>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet_3v3: regulator-enet-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet_3v3>;
+		regulator-name = "enet_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_pcie_gpio: regulator-pcie-gpio {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_enet_3v3>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_gpio>;
+	status = "okay";
+};
+
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "disabled";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	imx6x-sdb {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
+				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
+				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
+				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+				/* phy reset */
+				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
+			>;
+		};
+
+		pinctrl_enet_3v3: enet3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
+				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
+				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
+				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
+				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
+			>;
+		};
+
+		pinctrl_peri_3v3: peri3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp-1 {
+			fsl,pins = <
+				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_qspi2: qspi2grp {
+			fsl,pins = <
+				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
+				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
+				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
+				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
+				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
+				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
+				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
+				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
+				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
+				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
+				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
+				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+
+		pinctrl_sai1: sai1grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
+				MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
+				MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
+				MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
+				MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
+				MX6SX_PAD_KEY_ROW2__UART5_CTS_B		0x1b0b1
+				MX6SX_PAD_KEY_COL2__UART5_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1: usbotg1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usb_otg2: usbot2ggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+			>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-softing-vining-2000.dts b/roms/u-boot/arch/arm/dts/imx6sx-softing-vining-2000.dts
new file mode 100644
index 000000000..78dd5755a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-softing-vining-2000.dts
@@ -0,0 +1,595 @@
+/*
+ * Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Softing VIN|ING 2000";
+	compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
+
+	aliases {
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		red {
+			label = "red";
+			max-brightness = <255>;
+			pwms = <&pwm6 0 50000>;
+		};
+
+		green {
+			label = "green";
+			max-brightness = <255>;
+			pwms = <&pwm2 0 50000>;
+		};
+
+		blue {
+			label = "blue";
+			max-brightness = <255>;
+			pwms = <&pwm1 0 50000>;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_peri_3v3>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * This board has a shared rail of reg_arm and reg_soc (supplied by
+	 * sw1a_reg) which is modeled below, but still this module behaves
+	 * unstable without higher voltages. Hence, set higher voltages here.
+	 */
+	operating-points = <
+		/* kHz    uV */
+		996000  1250000
+		792000  1175000
+		396000  1175000
+		198000  1175000
+		>;
+	fsl,soc-operating-points = <
+		/* ARM kHz  SOC uV */
+		996000	1250000
+		792000	1175000
+		396000	1175000
+		198000  1175000
+	>;
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_peri_3v3>;
+	phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <5>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet0-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-supply = <&reg_peri_3v3>;
+	phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <5>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet1-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	proximity: sx9500@28 {
+		compatible = "semtech,sx9500";
+		reg = <0x28>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sx9500>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze200";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&reg_pcie {
+	regulator-always-on;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CLK__ECSPI4_SCLK		0x130b1
+			MX6SX_PAD_SD3_DATA3__ECSPI4_MISO	0x130b1
+			MX6SX_PAD_SD3_CMD__ECSPI4_MOSI		0x130b1
+			MX6SX_PAD_SD3_DATA2__GPIO7_IO_4		0x30b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x30c1
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x30c1
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0f9
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0f9
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x30c1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0f9
+			MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4000a038
+			/* LAN8720 PHY Reset */
+			MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9	0x10b0
+			/* MDIO */
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0f9
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0f9
+			/* IRQ from PHY */
+			MX6SX_PAD_KEY_ROW2__GPIO2_IO_17		0x10b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x1b0b0
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x1b0b0
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x1b0b0
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x1b0b0
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x1b0b0
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x1b0b0
+			MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4000a038
+			/* LAN8720 PHY Reset */
+			MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21	0x10b0
+			/* MDIO */
+			MX6SX_PAD_ENET1_COL__ENET2_MDC		0xa0f9
+			MX6SX_PAD_ENET1_CRS__ENET2_MDIO		0xa0f9
+			/* IRQ from PHY */
+			MX6SX_PAD_KEY_ROW4__GPIO2_IO_19		0x10b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			/* reset external uC */
+			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x10b0
+			/* IRQ from external uC */
+			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x10b0
+			/* overcurrent detection */
+			MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8	0x10b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_ALE__I2C3_SDA		0x4001b8b1
+			MX6SX_PAD_NAND_CLE__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_DATA02__GPIO4_IO_6	0x10b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp-1 {
+		fsl,pins = <
+			/* blue LED */
+			MX6SX_PAD_RGMII2_RD3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp-1 {
+		fsl,pins = <
+			/* green LED */
+			MX6SX_PAD_RGMII2_RD2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp-1 {
+		fsl,pins = <
+			/* red LED */
+			MX6SX_PAD_RGMII2_TD2__PWM6_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_sx9500: sx9500grp {
+		fsl,pins = <
+			/* Reset */
+			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x838
+			/* IRQ */
+			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x70e0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28	0x1b000
+			MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26	0x10b0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100b9
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170b9
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x170b9
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x170b9
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x170b9
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100f9
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170f9
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x170f9
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x170f9
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x170f9
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17059
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17059
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17059
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17059
+			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17068
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
+		>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1a_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc4 {
+	/* hs200-mode is currently unsupported because Vccq is on 3.1V, but
+	 * not on necessary 1.8V.
+	 */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-basic.dts b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-basic.dts
new file mode 100644
index 000000000..205ea2648
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-basic.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Basic";
+	compatible = "udoo,neobasic", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-extended.dts b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-extended.dts
new file mode 100644
index 000000000..5817b4985
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-extended.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Extended";
+	compatible = "udoo,neoextended", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	status = "okay";
+};
+
+&uart3 { /* Bluetooth */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-full.dts b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-full.dts
new file mode 100644
index 000000000..96f4d8984
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-full.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Full";
+	compatible = "udoo,neofull", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	status = "okay";
+};
+
+&uart3 { /* Bluetooth */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-u-boot.dtsi
new file mode 100644
index 000000000..daf2489cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+	aliases {
+		mmc0 = &usdhc2;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo.dtsi b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo.dtsi
new file mode 100644
index 000000000..ee6456550
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx-udoo-neo.dtsi
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "imx6sx.dtsi"
+
+/ {
+	compatible = "fsl,imx6sx";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "udoo-neo:red:mmc";
+			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		orange {
+			label = "udoo-neo:orange:user";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	reg_sdio_pwr: regulator-sdio-pwr {
+		compatible = "regulator-fixed";
+		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "SDIO_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg1_reg>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg2_reg>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 { /* Brick snap in sensors connector */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins =
+			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
+			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
+			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
+
+			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
+			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
+			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
+			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
+			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
+			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
+
+			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
+			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1>,
+			<MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX6SX_PAD_USB_H_DATA__I2C4_SDA		0x4001b8b1>,
+			<MX6SX_PAD_USB_H_STROBE__I2C4_SCL	0x4001b8b1>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX6SX_PAD_SD3_DATA4__UART3_DCE_RX	0x13059>,
+			<MX6SX_PAD_SD3_DATA5__UART3_DCE_TX	0x13059>,
+			<MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS	0x13059>,
+			<MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS	0x13059>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins =
+			<MX6SX_PAD_SD4_DATA4__UART5_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_SD4_DATA5__UART5_DCE_TX	0x1b0b1>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins =
+			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA04__UART6_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA05__UART6_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS	0x1b0b1>;
+	};
+
+	pinctrl_otg1_reg: otg1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
+	};
+
+
+	pinctrl_otg2_reg: otg2grp {
+		fsl,pins =
+			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
+			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
+	};
+
+	pinctrl_usb_otg2: usbot2ggrp {
+		fsl,pins =
+			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
+			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
+			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
+			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
+			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
+			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
+			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_COL2__GPIO2_IO_12	0x15059>,
+			<MX6SX_PAD_KEY_ROW1__GPIO2_IO_16	0x13059>,
+			<MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17069>,
+			<MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17069>,
+			<MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17069>,
+			<MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17069>,
+			<MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17069>,
+			<MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10069>,
+			<MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT	0x10059>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Cortex-M4 serial */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&uart3 { /* Bluetooth - only on Extended/Full versions */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		max-speed = <921600>;
+	};
+};
+
+/* Arduino serial */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbotg1 { /* J2 micro USB port */
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	status = "okay";
+};
+
+&usbotg2 { /* J3 host USB port */
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg2>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_sdio_pwr>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 { /* Wi-Fi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	vmmc-supply = <&reg_wlan>;
+	cap-power-off-card;
+	wakeup-source;
+	keep-power-in-suspend;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1831";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6sx.dtsi b/roms/u-boot/arch/arm/dts/imx6sx.dtsi
new file mode 100644
index 000000000..531a52c1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6sx.dtsi
@@ -0,0 +1,1395 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2014 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sx-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		can0 = &flexcan1;
+		can1 = &flexcan2;
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		spi4 = &ecspi5;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1075000
+				198000	975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC uV */
+				996000      1175000
+				792000      1175000
+				396000      1175000
+				198000	    1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6SX_CLK_ARM>,
+				 <&clks IMX6SX_CLK_PLL2_PFD2>,
+				 <&clks IMX6SX_CLK_STEP>,
+				 <&clks IMX6SX_CLK_PLL1_SW>,
+				 <&clks IMX6SX_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	anaclk1: clock-anaclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "anaclk1";
+	};
+
+	anaclk2: clock-anaclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "anaclk2";
+	};
+
+	tempmon: tempmon {
+		compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,tempmon = <&anatop>;
+		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+		nvmem-cell-names = "calib", "temp_grade";
+		clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram_s: sram@8f8000 {
+			compatible = "mmio-sram";
+			reg = <0x008f8000 0x4000>;
+			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
+		};
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks IMX6SX_CLK_OCRAM>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: l2-cache@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		gpu: gpu@1800000 {
+			compatible = "vivante,gc";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>;
+			clock-names = "bus", "core", "shader";
+			power-domains = <&pd_pu>;
+		};
+
+		dma_apbh: dma-apbh@1804000 {
+			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
+		};
+
+		gpmi: gpmi-nand@1806000{
+			compatible = "fsl,imx6sx-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6SX_CLK_GPMI_IO>,
+				 <&clks IMX6SX_CLK_GPMI_APB>,
+				 <&clks IMX6SX_CLK_GPMI_BCH>,
+				 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6SX_CLK_PER1_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: aips-bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SX_CLK_OSC>,
+						 <&clks IMX6SX_CLK_SPDIF>,
+						 <&clks 0>, <&clks 0>, <&clks 0>,
+						 <&clks IMX6SX_CLK_IPG>,
+						 <&clks 0>, <&clks 0>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI1>,
+						 <&clks IMX6SX_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI2>,
+						 <&clks IMX6SX_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI3>,
+						 <&clks IMX6SX_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI4>,
+						 <&clks IMX6SX_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sx-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_UART_IPG>,
+						 <&clks IMX6SX_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				esai: esai@2024000 {
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
+						 <&clks IMX6SX_CLK_ESAI_MEM>,
+						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
+						 <&clks IMX6SX_CLK_ESAI_IPG>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "core", "mem", "extal",
+						      "fsys", "spba";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
+						 <&clks IMX6SX_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
+						 <&clks IMX6SX_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
+						 <&clks IMX6SX_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				asrc: asrc@2034000 {
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
+						 <&clks IMX6SX_CLK_ASRC_IPG>,
+						 <&clks IMX6SX_CLK_SPDIF>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck", "spba";
+					dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
+					       <&sdma 19 20 1>, <&sdma 20 20 1>,
+					       <&sdma 21 20 1>, <&sdma 22 20 1>;
+					dma-names = "rxa", "rxb", "rxc",
+						    "txa", "txb", "txc";
+					status = "okay";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM1>,
+					 <&clks IMX6SX_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM2>,
+					 <&clks IMX6SX_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM3>,
+					 <&clks IMX6SX_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM4>,
+					 <&clks IMX6SX_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			flexcan1: can@2090000 {
+				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
+					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+				status = "disabled";
+			};
+
+			flexcan2: can@2094000 {
+				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
+					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+				status = "disabled";
+			};
+
+			gpt: gpt@2098000 {
+				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
+					 <&clks IMX6SX_CLK_GPT_3M>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 26>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 31 20>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 51 29>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 80 32>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 112 24>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
+			};
+
+			gpio7: gpio@20b4000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
+			};
+
+			kpp: kpp@20b8000 {
+				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@20bc000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+			};
+
+			wdog2: wdog@20c0000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			clks: ccm@20c4000 {
+				compatible = "fsl,imx6sx-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_vdd1p1: regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd2p5: regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pcie: regulator-vddpcie {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpcie";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			epit1: epit@20d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@20d8000 {
+				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_soc>;
+						clocks = <&clks IMX6SX_CLK_GPU>;
+					};
+
+					pd_disp: power-domain@2 {
+						reg = <2>;
+						#power-domain-cells = <0>;
+						clocks = <&clks IMX6SX_CLK_PXP_AXI>,
+							 <&clks IMX6SX_CLK_DISPLAY_AXI>,
+							 <&clks IMX6SX_CLK_LCDIF1_PIX>,
+							 <&clks IMX6SX_CLK_LCDIF_APB>,
+							 <&clks IMX6SX_CLK_LCDIF2_PIX>,
+							 <&clks IMX6SX_CLK_CSI>,
+							 <&clks IMX6SX_CLK_VADC>;
+					};
+
+					pd_pci: power-domain@3 {
+						reg = <3>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pcie>;
+					};
+				};
+			};
+
+			iomuxc: iomuxc@20e0000 {
+				compatible = "fsl,imx6sx-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6sx-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			sdma: sdma@20ec000 {
+				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>,
+					 <&clks IMX6SX_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				/* imx6sx reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		aips2: aips-bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: caam@2100000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2100000 0x10000>;
+				ranges = <0 0x2100000 0x10000>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SX_CLK_CAAM_MEM>,
+					 <&clks IMX6SX_CLK_CAAM_ACLK>,
+					 <&clks IMX6SX_CLK_CAAM_IPG>,
+					 <&clks IMX6SX_CLK_EIM_SLOW>;
+				clock-names = "mem", "aclk", "ipg", "emi_slow";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh: usb@2184400 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc 2>;
+				phy_type = "hsic";
+				fsl,anatop = <&anatop>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+			};
+
+			fec1: ethernet@2188000 {
+				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ENET>,
+					 <&clks IMX6SX_CLK_ENET_AHB>,
+					 <&clks IMX6SX_CLK_ENET_PTP>,
+					 <&clks IMX6SX_CLK_ENET_REF>,
+					 <&clks IMX6SX_CLK_ENET_PTP>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				status = "disabled";
+			};
+
+			mlb: mlb@218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_MLB>;
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@2190000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC1>,
+					 <&clks IMX6SX_CLK_USDHC1>,
+					 <&clks IMX6SX_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@2194000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC2>,
+					 <&clks IMX6SX_CLK_USDHC2>,
+					 <&clks IMX6SX_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@2198000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC3>,
+					 <&clks IMX6SX_CLK_USDHC3>,
+					 <&clks IMX6SX_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: usdhc@219c000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC4>,
+					 <&clks IMX6SX_CLK_USDHC4>,
+					 <&clks IMX6SX_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			memory-controller@21b0000 {
+				compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>;
+			};
+
+			fec2: ethernet@21b4000 {
+				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+				reg = <0x021b4000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ENET>,
+					 <&clks IMX6SX_CLK_ENET_AHB>,
+					 <&clks IMX6SX_CLK_ENET_PTP>,
+					 <&clks IMX6SX_CLK_ENET2_REF_125M>,
+					 <&clks IMX6SX_CLK_ENET_PTP>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				status = "disabled";
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sx-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			sai1: sai@21d4000 {
+				compatible = "fsl,imx6sx-sai";
+				reg = <0x021d4000 0x4000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
+					 <&clks IMX6SX_CLK_SAI1>,
+					 <&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
+				status = "disabled";
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			sai2: sai@21dc000 {
+				compatible = "fsl,imx6sx-sai";
+				reg = <0x021dc000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
+					 <&clks IMX6SX_CLK_SAI2>,
+					 <&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@21e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_QSPI1>,
+					 <&clks IMX6SX_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			qspi2: spi@21e4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-qspi";
+				reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_QSPI2>,
+					 <&clks IMX6SX_CLK_QSPI2>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C4>;
+				status = "disabled";
+			};
+		};
+
+		aips3: aips-bus@2200000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02200000 0x100000>;
+			ranges;
+
+			spba-bus@2240000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02240000 0x40000>;
+				ranges;
+
+				csi1: csi@2214000 {
+					reg = <0x02214000 0x4000>;
+					interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+						 <&clks IMX6SX_CLK_CSI>,
+						 <&clks IMX6SX_CLK_DCIC1>;
+					clock-names = "disp-axi", "csi_mclk", "dcic";
+					status = "disabled";
+				};
+
+				pxp: pxp@2218000 {
+					compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp";
+					reg = <0x02218000 0x4000>;
+					interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_PXP_AXI>;
+					clock-names = "axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+
+				csi2: csi@221c000 {
+					reg = <0x0221c000 0x4000>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+						 <&clks IMX6SX_CLK_CSI>,
+						 <&clks IMX6SX_CLK_DCIC2>;
+					clock-names = "disp-axi", "csi_mclk", "dcic";
+					status = "disabled";
+				};
+
+				lcdif1: lcdif@2220000 {
+					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+					reg = <0x02220000 0x4000>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+						 <&clks IMX6SX_CLK_LCDIF_APB>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pix", "axi", "disp_axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+
+				lcdif2: lcdif@2224000 {
+					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+					reg = <0x02224000 0x4000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
+						 <&clks IMX6SX_CLK_LCDIF_APB>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pix", "axi", "disp_axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+
+				vadc: vadc@2228000 {
+					reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
+					reg-names = "vadc-vafe", "vadc-vdec";
+					clocks = <&clks IMX6SX_CLK_VADC>,
+						 <&clks IMX6SX_CLK_CSI>;
+					clock-names = "vadc", "csi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+			};
+
+			adc1: adc@2280000 {
+				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+				reg = <0x02280000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			adc2: adc@2284000 {
+				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+				reg = <0x02284000 0x4000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@2288000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			ecspi5: spi@228c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+				reg = <0x0228c000 0x4000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ECSPI5>,
+					 <&clks IMX6SX_CLK_ECSPI5>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@22a0000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x022a0000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			pwm5: pwm@22a4000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022a4000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM5>,
+					 <&clks IMX6SX_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm6: pwm@22a8000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022a8000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM6>,
+					 <&clks IMX6SX_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm7: pwm@22ac000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022ac000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM7>,
+					 <&clks IMX6SX_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm8: pwm@22b0000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x0022b0000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM8>,
+					 <&clks IMX6SX_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+		};
+
+		pcie: pcie@8ffc000 {
+			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_PCIE_AXI>,
+				 <&clks IMX6SX_CLK_LVDS1_OUT>,
+				 <&clks IMX6SX_CLK_PCIE_REF_125M>,
+				 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi";
+			power-domains = <&pd_disp>, <&pd_pci>;
+			power-domain-names = "pcie", "pcie_phy";
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
new file mode 100644
index 000000000..d0cbf79e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&{/aliases} {
+	u-boot,dm-pre-reloc;
+	display0 = &lcdif;
+};
+
+&qspi {
+	flash0: n25q256a@0 {
+		compatible = "jedec,spi-nor";
+	};
+};
+
+&{/soc} {
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-pre-reloc;
+};
+
+&iomuxc {
+	u-boot,dm-pre-reloc;
+};
+
+&lcdif {
+	display = <&display0>;
+	u-boot,dm-pre-reloc;
+
+	display0: display@0 {
+		bits-per-pixel = <24>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <9200000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <8>;
+				hback-porch = <4>;
+				hsync-len = <41>;
+				vback-porch = <2>;
+				vfront-porch = <4>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk.dts b/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk.dts
new file mode 100644
index 000000000..2438669f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk.dtsi
new file mode 100644
index 000000000..463d7ca12
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-14x14-evk.dtsi
@@ -0,0 +1,532 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/ {
+	aliases {
+		spi5 = &{/spi4};
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+	};
+
+	spi4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		status = "okay";
+		gpio-sck = <&gpio5 11 0>;
+		gpio-mosi = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight_display>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		wlf,shared-lrclk;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	mag3110@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	broken-cd;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1grp_gpio {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+			/* used for lcd reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sim2: sim2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
+			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
+			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
+			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
+			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
+		>;
+	};
+
+	pinctrl_spi4: spi4grp {
+		fsl,pins = <
+			MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
+			MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
+			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi
new file mode 100644
index 000000000..77cb461a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi {
+	flash0: n25q256a@0 {
+		compatible = "jedec,spi-nor";
+	};
+};
\ No newline at end of file
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-9x9-evk.dts b/roms/u-boot/arch/arm/dts/imx6ul-9x9-evk.dts
new file mode 100644
index 000000000..227045112
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-9x9-evk.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 9x9 EVK Board";
+	compatible = "fsl,imx6ul-9x9-evk", "fsl,imx6ul";
+
+	aliases {
+		spi5 = &soft_spi;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_can_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_gpio_dvfs: regulator-gpio {
+			compatible = "regulator-gpio";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_dvfs>;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-name = "gpio_dvfs";
+			regulator-type = "voltage";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			states = <1300000 0x1 1400000 0x0>;
+		};
+
+		reg_sd1_vmmc: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			off-on-delay = <20000>;
+			enable-active-high;
+		};
+	};
+
+	soft_spi: soft-spi {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+		status = "okay";
+		gpio-sck = <&gpio5 11 0>;
+		gpio-mosi = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			registers-default = /bits/ 8 <0x57>;
+			spi-max-frequency = <100000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+					regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mag3110@0e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		position = <2>;
+	};
+
+	fxls8471@1e {
+		compatible = "fsl,fxls8471";
+		reg = <0x1e>;
+		position = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 8>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+	imx6ul-evk {
+
+		pinctrl_dvfs: dvfsgrp {
+			fsl,pins = <
+				MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x79
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+				MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x80000000
+			>;
+		};
+
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059 /* SD1 CD */
+				MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT	0x17059 /* SD1 VSELECT */
+				MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+				MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1grp_gpio {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+				MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+				MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2grp_gpio {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0
+				MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0
+			>;
+		};
+
+		pinctrl_qspi: qspigrp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a1
+				MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+				MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a1
+				MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a1
+				MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a1
+				MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+			>;
+		};
+
+
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
+				MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
+				MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
+				MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+				MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+			>;
+		};
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+	ddrsmp=<0>;
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		spi-nor,ddr-quad-read-dummy = <6>;
+		reg = <0>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-geam-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-geam-u-boot.dtsi
new file mode 100644
index 000000000..3141a07f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-geam-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6ul-u-boot.dtsi"
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		u-boot,dm-spl;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		u-boot,dm-spl;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		u-boot,dm-spl;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-geam.dts b/roms/u-boot/arch/arm/dts/imx6ul-geam.dts
new file mode 100644
index 000000000..07c21cb0a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-geam.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Engicam GEAM6UL";
+	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+
+	memory {
+		reg = <0x80000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi
new file mode 100644
index 000000000..6256b793d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6ul-isiot-u-boot.dtsi"
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-isiot-emmc.dts b/roms/u-boot/arch/arm/dts/imx6ul-isiot-emmc.dts
new file mode 100644
index 000000000..50ce2d798
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-isiot-emmc.dts
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include "imx6ul-isiot.dtsi"
+
+/ {
+	model = "Engicam Is.IoT MX6UL eMMC Starterkit";
+	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-isiot-nand.dts b/roms/u-boot/arch/arm/dts/imx6ul-isiot-nand.dts
new file mode 100644
index 000000000..ffdaf34ef
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-isiot-nand.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include "imx6ul-isiot.dtsi"
+
+/ {
+	model = "Engicam Is.IoT MX6UL NAND Starterkit";
+	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-isiot-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-isiot-u-boot.dtsi
new file mode 100644
index 000000000..aa8e9804b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-isiot-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "imx6ul-u-boot.dtsi"
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-isiot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-isiot.dtsi
new file mode 100644
index 000000000..4ed731368
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-isiot.dtsi
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO    0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC     0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10       0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		u-boot,dm-spl;
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK      0x17070
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD      0x10070
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3  0x17070
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4  0x17070
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5  0x17070
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6  0x17070
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7  0x17070
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B   0x17070
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-liteboard.dts b/roms/u-boot/arch/arm/dts/imx6ul-liteboard.dts
new file mode 100644
index 000000000..1d863a16b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-liteboard.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-litesom.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteBoard";
+	compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom",
+		     "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
+		>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-litesom.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-litesom.dtsi
new file mode 100644
index 000000000..8f775f697
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-litesom.dtsi
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteSOM";
+	compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK	    0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD	    0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B  0x17059
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi
new file mode 100644
index 000000000..4918de388
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the OPOS6UL SoM
+ *
+ * Copyright (C) 2018 Armadeus Systems <support@armadeus.com>
+ */
+
+/ {
+	soc {
+		u-boot,dm-spl;
+	};
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-opos6ul.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-opos6ul.dtsi
new file mode 100644
index 000000000..8f16a0a81
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-opos6ul.dtsi
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2018 Armadeus Systems <support@armadeus.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+
+/ {
+	memory {
+		reg = <0x80000000 0>; /* will be filled by U-Boot */
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-reset-duration = <1>;
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_3v3>;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			status = "okay";
+		};
+	};
+};
+
+/* Bluetooth */
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+/* WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x130b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x130b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x130b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x130b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			/* INT# */
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16		0x1b0b0
+			/* RST# */
+			MX6UL_PAD_NAND_DATA00__GPIO4_IO02	0x130b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS	0x1b0b0
+			/* BT_REG_ON */
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__USDHC2_CMD	0x1b0b0
+			MX6UL_PAD_LCD_DATA19__USDHC2_CLK	0x100b0
+			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0	0x1b0b0
+			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1	0x1b0b0
+			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2	0x1b0b0
+			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3	0x1b0b0
+			/* WL_REG_ON */
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x130b0
+			/* WL_IRQ */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
new file mode 100644
index 000000000..3f351ef0c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the OPOS6ULDev board
+ *
+ * Copyright (C) 2018 Armadeus Systems <support@armadeus.com>
+ */
+
+#include "imx6ul-opos6ul-u-boot.dtsi"
+
+/ {
+	aliases {
+		display0 = &lcdif;
+	};
+};
+
+&aips1 {
+	u-boot,dm-spl;
+
+	spba-bus@02000000 {
+		u-boot,dm-spl;
+	};
+};
+
+&lcdif {
+	u-boot,dm-pre-proper;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-spl;
+};
+
+&uart1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-opos6uldev.dts b/roms/u-boot/arch/arm/dts/imx6ul-opos6uldev.dts
new file mode 100644
index 000000000..4a541be6b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-opos6uldev.dts
@@ -0,0 +1,412 @@
+/*
+ * Copyright 2017 Armadeus Systems <support@armadeus.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul-opos6ul.dtsi"
+
+/ {
+	model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
+	compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_5v>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led {
+			label = "User";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led>;
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_w1>;
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg1_vbus: regulator-usbotg1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg1vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg2_vbus: regulator-usbotg2vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg2vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg2_vbus>;
+		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <5000000>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock_frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock_frequency = <400000>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	display = <&display0>;
+	lcd-supply = <&reg_3v3>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <18>;
+		bus-width = <18>;
+
+		display-timings {
+			timing0: timing0 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xffff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	vbus-supply = <&reg_usbotg1_vbus>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbotg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK	0x1b0b0
+			MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI	0x1b0b0
+			MX6UL_PAD_NAND_DATA06__ECSPI4_MISO	0x1b0b0
+			MX6UL_PAD_NAND_DATA01__GPIO4_IO03	0x1b0b0
+			MX6UL_PAD_NAND_DATA07__GPIO4_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x0b0b0
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x0b0b0
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x0b0b0
+			MX6UL_PAD_NAND_RE_B__GPIO4_IO00		0x0b0b0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x0b0b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0b0b0
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0b0b0
+			MX6UL_PAD_NAND_WE_B__GPIO4_IO01		0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x100b1
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg1_vbus: usbotg1vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_w1: w1grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
new file mode 100644
index 000000000..c2a7c7877
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 UltraLite";
+	compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio_leds_som: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds_som>;
+		compatible = "gpio-leds";
+
+		phycore-green {
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "disabled";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			status = "disabled";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "catalyst,24c32", "atmel,24c32";
+		reg = <0x52>;
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x10010
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x10010
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x17059
+		>;
+	};
+
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2cgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
new file mode 100644
index 000000000..699dfcbf9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-phytec-phycore-som.dtsi"
+#include "imx6ul-phytec-segin.dtsi"
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
+	compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10",
+		     "phytec,imx6ul-pcl063", "fsl,imx6ul";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 000000000..2f3fd32a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys: gpio-keys {
+		compatible = "gpio-key";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+
+	pinctrl_user_leds: user_ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x79
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin.dtsi
new file mode 100644
index 000000000..8d5f8dc6a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-phytec-segin.dtsi
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
+	compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_sound_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		status = "disabled";
+	};
+
+	reg_sound_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+
+	reg_can1_en: regulator-can1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&princtrl_flexcan1_en>;
+		regulator-name = "Can";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_adc1_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&tlv320>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_adc1_vref_3v3>;
+	/*
+	 * driver can not separate a specific channel so we request 4 channels
+	 * here - we need only the fourth channel
+	 */
+	num-channels = <4>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_en>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "disabled";
+};
+
+&i2c1 {
+	tlv320: codec@18 {
+		compatible = "ti,tlv320aic3007";
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+		status = "disabled";
+	};
+
+	stmpe: touchscreen@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		status = "disabled";
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+			touchscreen-inverted-x = <1>;
+			touchscreen-inverted-y = <1>;
+		};
+	};
+
+	i2c_rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		micrel,led-mode = <1>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		status = "disabled";
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			<&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "disabled";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1 {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-pico-hobbit.dts b/roms/u-boot/arch/arm/dts/imx6ul-pico-hobbit.dts
new file mode 100644
index 000000000..39eeeddac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-pico-hobbit.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and HOBBIT baseboard";
+	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x10b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-pico-pi.dts b/roms/u-boot/arch/arm/dts/imx6ul-pico-pi.dts
new file mode 100644
index 000000000..de07357b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-pico-pi.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and PI baseboard";
+	compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-pico.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-pico.dtsi
new file mode 100644
index 000000000..de9f83189
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-pico.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 6 0>;
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+	phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			/* VDD_ARM_SOC_IN*/
+			sw1b_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* DRAM */
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DRAM */
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <33200000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <210>;
+				hback-porch = <46>;
+				hsync-len = <1>;
+				vback-porch = <22>;
+				vfront-porch = <23>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi SDIO */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA06__GPIO4_IO08	0x10b0	/* WL_REG_ON */
+			MX6UL_PAD_NAND_DATA04__GPIO4_IO06	0x10b0	/* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET2_MDC	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x800
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x79
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_GPIO1_IO03__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__I2C3_SCL	0x4001b8b0
+			MX6UL_PAD_UART1_RX_DATA__I2C3_SDA	0x4001b8b0
+			>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			/* LCD reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b0
+			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b0
+			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
+			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b0
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x10b0
+			>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-pinfunc.h b/roms/u-boot/arch/arm/dts/imx6ul-pinfunc.h
new file mode 100644
index 000000000..380d2db13
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-pinfunc.h
@@ -0,0 +1,959 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2014 - 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6UL_PINFUNC_H
+#define __DTS_IMX6UL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10		0x0014 0x02a0 0x0000 5 0
+#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11		0x0018 0x02a4 0x0000 5 0
+
+#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00		0x001c 0x02a8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01		0x0020 0x02ac 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02		0x0024 0x02b0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03		0x0028 0x02b4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04		0x002c 0x02b8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05		0x0030 0x02bc 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06		0x0034 0x02c0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07		0x0038 0x02c4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08		0x003c 0x02c8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09		0x0040 0x02cc 0x0000 5 0
+
+#define MX6UL_PAD_JTAG_MOD__SJC_MOD			0x0044 0x02d0 0x0000 0 0
+#define MX6UL_PAD_JTAG_MOD__GPT2_CLK			0x0044 0x02d0 0x05a0 1 0
+#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT			0x0044 0x02d0 0x0000 2 0
+#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M		0x0044 0x02d0 0x0000 3 0
+#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY		0x0044 0x02d0 0x04c0 4 0
+#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10			0x0044 0x02d0 0x0000 5 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00		0x0044 0x02d0 0x0610 6 0
+#define MX6UL_PAD_JTAG_TMS__SJC_TMS			0x0048 0x02d4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1		0x0048 0x02d4 0x0598 1 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK			0x0048 0x02d4 0x05f0 2 0
+#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1			0x0048 0x02d4 0x0000 3 0
+#define MX6UL_PAD_JTAG_TMS__CCM_WAIT			0x0048 0x02d4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11			0x0048 0x02d4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01		0x0048 0x02d4 0x0614 6 0
+#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT			0x0048 0x02d4 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDO__SJC_TDO			0x004c 0x02d8 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2		0x004c 0x02d8 0x059c 1 0
+#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC		0x004c 0x02d8 0x05fc 2 0
+#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2			0x004c 0x02d8 0x0000 3 0
+#define MX6UL_PAD_JTAG_TDO__CCM_STOP			0x004c 0x02d8 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12			0x004c 0x02d8 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT			0x004c 0x02d8 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT			0x004c 0x02d8 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDI__SJC_TDI			0x0050 0x02dc 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1		0x0050 0x02dc 0x0000 1 0
+#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK		0x0050 0x02dc 0x05f8 2 0
+#define MX6UL_PAD_JTAG_TDI__PWM6_OUT			0x0050 0x02dc 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13			0x0050 0x02dc 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDI__MQS_LEFT			0x0050 0x02dc 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL		0x0050 0x02dc 0x0000 8 0
+#define MX6UL_PAD_JTAG_TCK__SJC_TCK			0x0054 0x02e0 0x0000 0 0
+#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2		0x0054 0x02e0 0x0000 1 0
+#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA		0x0054 0x02e0 0x05f4 2 0
+#define MX6UL_PAD_JTAG_TCK__PWM7_OUT			0x0054 0x02e0 0x0000 4 0
+#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14			0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT			0x0054 0x02e0 0x0000 6 0
+#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL		0x0054 0x02e0 0x0000 8 0
+#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB		0x0058 0x02e4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3		0x0058 0x02e4 0x0000 1 0
+#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA		0x0058 0x02e4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT			0x0058 0x02e4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15		0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__REF_CLK_24M		0x0058 0x02e4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS		0x0058 0x02e4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL			0x005c 0x02e8 0x05ac 0 1
+#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1		0x005c 0x02e8 0x058c 1 0
+#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID		0x005c 0x02e8 0x04b8 2 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1		0x005c 0x02e8 0x0574 3 0
+#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT			0x005c 0x02e8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00		0x005c 0x02e8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN	0x005c 0x02e8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET		0x005c 0x02e8 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B		0x005c 0x02e8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA			0x0060 0x02ec 0x05b0 0 1
+#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1		0x0060 0x02ec 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC		0x0060 0x02ec 0x0664 2 0
+#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2		0x0060 0x02ec 0x057c 3 0
+#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT			0x0060 0x02ec 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x0060 0x02ec 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT	0x0060 0x02ec 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET		0x0060 0x02ec 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B		0x0060 0x02ec 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL			0x0064 0x02f0 0x05a4 0 0
+#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2		0x0064 0x02f0 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR		0x0064 0x02f0 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M		0x0064 0x02f0 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP			0x0064 0x02f0 0x066c 4 0
+#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x0064 0x02f0 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00		0x0064 0x02f0 0x0610 6 1
+#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET		0x0064 0x02f0 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX		0x0064 0x02f0 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX		0x0064 0x02f0 0x0624 8 0
+#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA			0x0068 0x02f4 0x05a8 0 1
+#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3		0x0068 0x02f4 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC		0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT		0x0068 0x02f4 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B		0x0068 0x02f4 0x0668 4 0
+#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x0068 0x02f4 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK		0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK		0x0068 0x02f4 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX		0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX		0x0068 0x02f4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1		0x006c 0x02f8 0x0574 0 1
+#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT			0x006c 0x02f8 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR		0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__REF_CLK_24M		0x006c 0x02f8 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B		0x006c 0x02f8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0x006c 0x02f8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN	0x006c 0x02f8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX		0x006c 0x02f8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX		0x006c 0x02f8 0x0644 8 2
+#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2		0x0070 0x02fc 0x057c 0 1
+#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT			0x0070 0x02fc 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID		0x0070 0x02fc 0x04bc 2 0
+#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD			0x0070 0x02fc 0x0530 3 0
+#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT		0x0070 0x02fc 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x0070 0x02fc 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT	0x0070 0x02fc 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX		0x0070 0x02fc 0x0644 8 3
+#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX		0x0070 0x02fc 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO		0x0074 0x0300 0x0578 0 0
+#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO		0x0074 0x0300 0x0580 1 0
+#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE		0x0074 0x0300 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK			0x0074 0x0300 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP			0x0074 0x0300 0x069c 4 0
+#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x0074 0x0300 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT			0x0074 0x0300 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B		0x0074 0x0300 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS		0x0074 0x0300 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS		0x0074 0x0300 0x0620 8 0
+#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC			0x0078 0x0304 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC			0x0078 0x0304 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE		0x0078 0x0304 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK		0x0078 0x0304 0x0528 3 0
+#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B		0x0078 0x0304 0x0674 4 1
+#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0x0078 0x0304 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO07__CCM_STOP			0x0078 0x0304 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS		0x0078 0x0304 0x0620 8 1
+#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS		0x0078 0x0304 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x007c 0x0308 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B		0x007c 0x0308 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT			0x007c 0x0308 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC			0x007c 0x0308 0x052c 3 1
+#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT		0x007c 0x0308 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08		0x007c 0x0308 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY		0x007c 0x0308 0x04c0 6 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS		0x007c 0x0308 0x0640 8 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS		0x007c 0x0308 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT			0x0080 0x030c 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY		0x0080 0x030c 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN			0x0080 0x030c 0x0618 2 0
+#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC			0x0080 0x030c 0x0524 3 1
+#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B		0x0080 0x030c 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x0080 0x030c 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B		0x0080 0x030c 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS		0x0080 0x030c 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS		0x0080 0x030c 0x0640 8 2
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x0084 0x0310 0x0000 0 0
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX		0x0084 0x0310 0x0624 0 2
+#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02		0x0084 0x0310 0x0000 1 0
+#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL		0x0084 0x0310 0x05b4 2 0
+#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02		0x0084 0x0310 0x04c4 3 1
+#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1		0x0084 0x0310 0x0000 4 0
+#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16		0x0084 0x0310 0x0000 5 0
+#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT		0x0084 0x0310 0x0000 8 0
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x0088 0x0314 0x0624 0 3
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX		0x0088 0x0314 0x0000 0 0
+#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03		0x0088 0x0314 0x0000 1 0
+#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA		0x0088 0x0314 0x05b8 2 0
+#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03		0x0088 0x0314 0x04c8 3 1
+#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK		0x0088 0x0314 0x0594 4 0
+#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17		0x0088 0x0314 0x0000 5 0
+#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN		0x0088 0x0314 0x0618 8 1
+#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS		0x008c 0x0318 0x0000 0 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS		0x008c 0x0318 0x0620 0 2
+#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK		0x008c 0x0318 0x0000 1 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP		0x008c 0x0318 0x066c 2 1
+#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04		0x008c 0x0318 0x04d8 3 0
+#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN	0x008c 0x0318 0x0000 4 0
+#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18		0x008c 0x0318 0x0000 5 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP		0x008c 0x0318 0x069c 8 1
+#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS		0x0090 0x031c 0x0620 0 3
+#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS		0x0090 0x031c 0x0000 0 0
+#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER		0x0090 0x031c 0x0000 1 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B		0x0090 0x031c 0x0668 2 1
+#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05		0x0090 0x031c 0x04cc 3 1
+#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT	0x0090 0x031c 0x0000 4 0
+#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x0090 0x031c 0x0000 5 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B		0x0090 0x031c 0x0674 8 2
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX		0x0094 0x0320 0x0000 0 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX		0x0094 0x0320 0x062c 0 0
+#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02		0x0094 0x0320 0x0000 1 0
+#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL		0x0094 0x0320 0x05bc 2 0
+#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06		0x0094 0x0320 0x04dc 3 0
+#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1		0x0094 0x0320 0x058c 4 1
+#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x0094 0x0320 0x0000 5 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0		0x0094 0x0320 0x0560 8 0
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX		0x0098 0x0324 0x062c 0 1
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX		0x0098 0x0324 0x0000 0 0
+#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03		0x0098 0x0324 0x0000 1 0
+#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA		0x0098 0x0324 0x05c0 2 0
+#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07		0x0098 0x0324 0x04e0 3 0
+#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2		0x0098 0x0324 0x0590 4 0
+#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21		0x0098 0x0324 0x0000 5 0
+#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE		0x0098 0x0324 0x0000 7 0
+#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x0098 0x0324 0x0554 8 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS		0x009c 0x0328 0x0000 0 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS		0x009c 0x0328 0x0628 0 0
+#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS		0x009c 0x0328 0x0000 1 0
+#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX		0x009c 0x0328 0x0000 2 0
+#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08		0x009c 0x0328 0x04e4 3 0
+#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2		0x009c 0x0328 0x0000 4 0
+#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22		0x009c 0x0328 0x0000 5 0
+#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B			0x009c 0x0328 0x0000 7 0
+#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x009c 0x0328 0x055c 8 0
+#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS		0x00a0 0x032c 0x0628 0 1
+#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS		0x00a0 0x032c 0x0000 0 0
+#define MX6UL_PAD_UART2_RTS_B__ENET1_COL		0x00a0 0x032c 0x0000 1 0
+#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX		0x00a0 0x032c 0x0588 2 0
+#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09		0x00a0 0x032c 0x04e8 3 0
+#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3		0x00a0 0x032c 0x0000 4 0
+#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23		0x00a0 0x032c 0x0000 5 0
+#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL			0x00a0 0x032c 0x0000 7 0
+#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO		0x00a0 0x032c 0x0558 8 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX		0x00a4 0x0330 0x0000 0 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX		0x00a4 0x0330 0x0634 0 0
+#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02		0x00a4 0x0330 0x0000 1 0
+#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD		0x00a4 0x0330 0x0000 2 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01		0x00a4 0x0330 0x04d4 3 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS		0x00a4 0x0330 0x0000 4 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS		0x00a4 0x0330 0x0628 4 2
+#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24		0x00a4 0x0330 0x0000 5 0
+#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT		0x00a4 0x0330 0x0000 7 0
+#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID		0x00a4 0x0330 0x04b8 8 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX		0x00a8 0x0334 0x0634 0 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX		0x00a8 0x0334 0x0000 0 0
+#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03		0x00a8 0x0334 0x0000 1 0
+#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD		0x00a8 0x0334 0x0000 2 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00		0x00a8 0x0334 0x04d0 3 0
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS		0x00a8 0x0334 0x0628 4 3
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS		0x00a8 0x0334 0x0000 4 0
+#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25		0x00a8 0x0334 0x0000 5 0
+#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT		0x00a8 0x0334 0x0000 8 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS		0x00ac 0x0338 0x0000 0 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS		0x00ac 0x0338 0x0630 0 0
+#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK		0x00ac 0x0338 0x0000 1 0
+#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x00ac 0x0338 0x0000 2 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10		0x00ac 0x0338 0x04ec 3 0
+#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN	0x00ac 0x0338 0x0000 4 0
+#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26		0x00ac 0x0338 0x0000 5 0
+#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT		0x00ac 0x0338 0x0000 8 0
+#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS		0x00b0 0x033c 0x0630 0 1
+#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS		0x00b0 0x033c 0x0000 0 0
+#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER		0x00b0 0x033c 0x0000 1 0
+#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x00b0 0x033c 0x0584 2 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11		0x00b0 0x033c 0x04f0 3 0
+#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT	0x00b0 0x033c 0x0000 4 0
+#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27		0x00b0 0x033c 0x0000 5 0
+#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B		0x00b0 0x033c 0x0000 8 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX		0x00b4 0x0340 0x0000 0 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX		0x00b4 0x0340 0x063c 0 0
+#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02		0x00b4 0x0340 0x0000 1 0
+#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x00b4 0x0340 0x05a4 2 1
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12		0x00b4 0x0340 0x04f4 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02	0x00b4 0x0340 0x0000 4 0
+#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28		0x00b4 0x0340 0x0000 5 0
+#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK		0x00b4 0x0340 0x0544 8 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX		0x00b8 0x0344 0x063c 0 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX		0x00b8 0x0344 0x0000 0 0
+#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03		0x00b8 0x0344 0x0000 1 0
+#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x00b8 0x0344 0x05a8 2 2
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13		0x00b8 0x0344 0x04f8 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01	0x00b8 0x0344 0x0000 4 0
+#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29		0x00b8 0x0344 0x0000 5 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0		0x00b8 0x0344 0x0550 8 1
+#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30		0x00bc 0x0348 0x0000 5 0
+#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI		0x00bc 0x0348 0x054c 8 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX		0x00bc 0x0348 0x0000 0 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX		0x00bc 0x0348 0x0644 0 4
+#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS		0x00bc 0x0348 0x0000 1 0
+#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x00bc 0x0348 0x05ac 2 2
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14		0x00bc 0x0348 0x04fc 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00	0x00bc 0x0348 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00c0 0x034c 0x0644 0 5
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX		0x00c0 0x034c 0x0000 0 0
+#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL		0x00c0 0x034c 0x0000 1 0
+#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x00c0 0x034c 0x05b0 2 2
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15		0x00c0 0x034c 0x0500 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB	0x00c0 0x034c 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31		0x00c0 0x034c 0x0000 5 0
+#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO		0x00c0 0x034c 0x0548 8 1
+#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x00c4 0x0350 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS		0x00c4 0x0350 0x0638 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS		0x00c4 0x0350 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT		0x00c4 0x0350 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16		0x00c4 0x0350 0x0504 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX		0x00c4 0x0350 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00		0x00c4 0x0350 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00		0x00c4 0x0350 0x05d0 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL		0x00c4 0x0350 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x00c8 0x0354 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS		0x00c8 0x0354 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS		0x00c8 0x0354 0x0638 1 1
+#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT		0x00c8 0x0354 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17		0x00c8 0x0354 0x0508 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX		0x00c8 0x0354 0x0584 4 1
+#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x00c8 0x0354 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00		0x00c8 0x0354 0x05c4 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL		0x00c8 0x0354 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x00cc 0x0358 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS		0x00cc 0x0358 0x0640 1 3
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS		0x00cc 0x0358 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT		0x00cc 0x0358 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18		0x00cc 0x0358 0x050c 3 0
+#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX		0x00cc 0x0358 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x00cc 0x0358 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01		0x00cc 0x0358 0x05d4 6 0
+#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT		0x00cc 0x0358 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x00d0 0x035c 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS		0x00d0 0x035c 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS		0x00d0 0x035c 0x0640 1 4
+#define MX6UL_PAD_ENET1_TX_DATA0__REF_CLK_24M		0x00d0 0x035c 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19		0x00d0 0x035c 0x0510 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX		0x00d0 0x035c 0x0588 4 1
+#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x00d0 0x035c 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01		0x00d0 0x035c 0x05c8 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT	0x00d0 0x035c 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x00d4 0x0360 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS		0x00d4 0x0360 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS		0x00d4 0x0360 0x0648 1 2
+#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT		0x00d4 0x0360 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20		0x00d4 0x0360 0x0514 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO		0x00d4 0x0360 0x0580 4 1
+#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x00d4 0x0360 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02		0x00d4 0x0360 0x05d8 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB	0x00d4 0x0360 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x00d8 0x0364 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS		0x00d8 0x0364 0x0648 1 3
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS		0x00d8 0x0364 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT			0x00d8 0x0364 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21		0x00d8 0x0364 0x0518 3 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC		0x00d8 0x0364 0x0000 4 0
+#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05		0x00d8 0x0364 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02		0x00d8 0x0364 0x05cc 6 0
+#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB	0x00d8 0x0364 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK		0x00dc 0x0368 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS		0x00dc 0x0368 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS		0x00dc 0x0368 0x0650 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT		0x00dc 0x0368 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22		0x00dc 0x0368 0x051c 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x00dc 0x0368 0x0574 4 2
+#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x00dc 0x0368 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03		0x00dc 0x0368 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK		0x00dc 0x0368 0x0594 8 1
+#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x00e0 0x036c 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS		0x00e0 0x036c 0x0650 1 1
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS		0x00e0 0x036c 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT			0x00e0 0x036c 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23		0x00e0 0x036c 0x0520 3 0
+#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE			0x00e0 0x036c 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07		0x00e0 0x036c 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03		0x00e0 0x036c 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2		0x00e0 0x036c 0x0590 8 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00		0x00e4 0x0370 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX		0x00e4 0x0370 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX		0x00e4 0x0370 0x064c 1 1
+#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD	0x00e4 0x0370 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL		0x00e4 0x0370 0x05b4 3 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO		0x00e4 0x0370 0x0578 4 1
+#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x00e4 0x0370 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04		0x00e4 0x0370 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR		0x00e4 0x0370 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01		0x00e8 0x0374 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX		0x00e8 0x0374 0x064c 1 2
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX		0x00e8 0x0374 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK	0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA		0x00e8 0x0374 0x05b8 3 1
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC		0x00e8 0x0374 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x00e8 0x0374 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04		0x00e8 0x0374 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC		0x00e8 0x0374 0x0664 8 1
+#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN		0x00ec 0x0378 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX		0x00ec 0x0378 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX		0x00ec 0x0378 0x0654 1 0
+#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B		0x00ec 0x0378 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL			0x00ec 0x0378 0x05bc 3 1
+#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26		0x00ec 0x0378 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x00ec 0x0378 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05		0x00ec 0x0378 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M	0x00ec 0x0378 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00		0x00f0 0x037c 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX		0x00f0 0x037c 0x0654 1 1
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX		0x00f0 0x037c 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN	0x00f0 0x037c 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA		0x00f0 0x037c 0x05c0 3 1
+#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02		0x00f0 0x037c 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x00f0 0x037c 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05		0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M		0x00f0 0x037c 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01		0x00f4 0x0380 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX		0x00f4 0x0380 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX		0x00f4 0x0380 0x065c 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD	0x00f4 0x0380 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK		0x00f4 0x0380 0x0564 3 0
+#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03		0x00f4 0x0380 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x00f4 0x0380 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06		0x00f4 0x0380 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR		0x00f4 0x0380 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN		0x00f8 0x0384 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX		0x00f8 0x0384 0x065c 1 1
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX		0x00f8 0x0384 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_CLK		0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI		0x00f8 0x0384 0x056c 3 0
+#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN		0x00f8 0x0384 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x00f8 0x0384 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06		0x00f8 0x0384 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC		0x00f8 0x0384 0x0660 8 1
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK		0x00fc 0x0388 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS		0x00fc 0x0388 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS		0x00fc 0x0388 0x0658 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B	0x00fc 0x0388 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO		0x00fc 0x0388 0x0568 3 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2		0x00fc 0x0388 0x057c 4 2
+#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x00fc 0x0388 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07		0x00fc 0x0388 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID		0x00fc 0x0388 0x04bc 8 1
+#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER		0x0100 0x038c 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS		0x0100 0x038c 0x0658 1 1
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS		0x0100 0x038c 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN		0x0100 0x038c 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0		0x0100 0x038c 0x0570 3 0
+#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25		0x0100 0x038c 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x0100 0x038c 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07		0x0100 0x038c 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY		0x0100 0x038c 0x0000 8 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x0104 0x0390 0x0000 0 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN			0x0104 0x0390 0x0000 1 0
+#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX			0x0104 0x0390 0x0000 2 0
+#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX			0x0104 0x0390 0x063c 2 2
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK			0x0104 0x0390 0x0600 3 0
+#define MX6UL_PAD_LCD_CLK__EIM_CS2_B			0x0104 0x0390 0x0000 4 0
+#define MX6UL_PAD_LCD_CLK__GPIO3_IO00			0x0104 0x0390 0x0000 5 0
+#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB		0x0104 0x0390 0x0000 8 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x0108 0x0394 0x0000 0 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E		0x0108 0x0394 0x0000 1 0
+#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX		0x0108 0x0394 0x063c 2 3
+#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX		0x0108 0x0394 0x0000 2 0
+#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC		0x0108 0x0394 0x060c 3 0
+#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B			0x0108 0x0394 0x0000 4 0
+#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01		0x0108 0x0394 0x0000 5 0
+#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY		0x0108 0x0394 0x0000 8 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x010c 0x0398 0x05dc 0 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS			0x010c 0x0398 0x0000 1 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS		0x010c 0x0398 0x0000 2 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS		0x010c 0x0398 0x0638 2 2
+#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK		0x010c 0x0398 0x0608 3 0
+#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB	0x010c 0x0398 0x0000 4 0
+#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02			0x010c 0x0398 0x0000 5 0
+#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1			0x010c 0x0398 0x0000 8 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x0110 0x039c 0x0000 0 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY			0x0110 0x039c 0x05dc 1 1
+#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS		0x0110 0x039c 0x0638 2 3
+#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS		0x0110 0x039c 0x0000 2 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA		0x0110 0x039c 0x0604 3 0
+#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B		0x0110 0x039c 0x0000 4 0
+#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03			0x0110 0x039c 0x0000 5 0
+#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2			0x0110 0x039c 0x0000 8 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_RESET		0x0114 0x03a0 0x0000 0 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_CS			0x0114 0x03a0 0x0000 1 0
+#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI		0x0114 0x03a0 0x0000 2 0
+#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA		0x0114 0x03a0 0x0000 3 0
+#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x0114 0x03a0 0x0000 4 0
+#define MX6UL_PAD_LCD_RESET__GPIO3_IO04			0x0114 0x03a0 0x0000 5 0
+#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3			0x0114 0x03a0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x0118 0x03a4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA00__PWM1_OUT			0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__CA7_MX6UL_TRACE0		0x0118 0x03a4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN	0x0118 0x03a4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA00__I2C3_SDA			0x0118 0x03a4 0x05b8 4 2
+#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05		0x0118 0x03a4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00		0x0118 0x03a4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK			0x0118 0x03a4 0x05e0 8 1
+#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x011c 0x03a8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA01__PWM2_OUT			0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__CA7_MX6UL_TRACE1		0x011c 0x03a8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT	0x011c 0x03a8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA01__I2C3_SCL			0x011c 0x03a8 0x05b4 4 2
+#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06		0x011c 0x03a8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01		0x011c 0x03a8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC		0x011c 0x03a8 0x05ec 8 0
+#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x0120 0x03ac 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA02__PWM3_OUT			0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__CA7_MX6UL_TRACE2		0x0120 0x03ac 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN	0x0120 0x03ac 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA02__I2C4_SDA			0x0120 0x03ac 0x05c0 4 2
+#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07		0x0120 0x03ac 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02		0x0120 0x03ac 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK		0x0120 0x03ac 0x05e8 8 0
+#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x0124 0x03b0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA03__PWM4_OUT			0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__CA7_MX6UL_TRACE3		0x0124 0x03b0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT	0x0124 0x03b0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA03__I2C4_SCL			0x0124 0x03b0 0x05bc 4 2
+#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08		0x0124 0x03b0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03		0x0124 0x03b0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA		0x0124 0x03b0 0x05e4 8 0
+#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x0128 0x03b4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS		0x0128 0x03b4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS		0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__CA7_MX6UL_TRACE4		0x0128 0x03b4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN	0x0128 0x03b4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK		0x0128 0x03b4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09		0x0128 0x03b4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04		0x0128 0x03b4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA		0x0128 0x03b4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x012c 0x03b8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS		0x012c 0x03b8 0x0658 1 3
+#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS		0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__CA7_MX6UL_TRACE5		0x012c 0x03b8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT	0x012c 0x03b8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT			0x012c 0x03b8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10		0x012c 0x03b8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05		0x012c 0x03b8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1		0x012c 0x03b8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x0130 0x03bc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS		0x0130 0x03bc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS		0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__CA7_MX6UL_TRACE6		0x0130 0x03bc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN	0x0130 0x03bc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK		0x0130 0x03bc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11		0x0130 0x03bc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06		0x0130 0x03bc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2		0x0130 0x03bc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x0134 0x03c0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS		0x0134 0x03c0 0x0650 1 3
+#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS		0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__CA7_MX6UL_TRACE7		0x0134 0x03c0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT	0x0134 0x03c0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK		0x0134 0x03c0 0x061c 4 0
+#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12		0x0134 0x03c0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07		0x0134 0x03c0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3		0x0134 0x03c0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x0138 0x03c4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA08__SPDIF_IN			0x0138 0x03c4 0x0618 1 2
+#define MX6UL_PAD_LCD_DATA08__CA7_MX6UL_TRACE8		0x0138 0x03c4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16		0x0138 0x03c4 0x0504 3 1
+#define MX6UL_PAD_LCD_DATA08__EIM_DATA00		0x0138 0x03c4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13		0x0138 0x03c4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08		0x0138 0x03c4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX		0x0138 0x03c4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x013c 0x03c8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK			0x013c 0x03c8 0x0600 1 1
+#define MX6UL_PAD_LCD_DATA09__CA7_MX6UL_TRACE9		0x013c 0x03c8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17		0x013c 0x03c8 0x0508 3 1
+#define MX6UL_PAD_LCD_DATA09__EIM_DATA01		0x013c 0x03c8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14		0x013c 0x03c8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09		0x013c 0x03c8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX		0x013c 0x03c8 0x0584 8 2
+#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x0140 0x03cc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC		0x0140 0x03cc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA10__CA7_MX6UL_TRACE10		0x0140 0x03cc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18		0x0140 0x03cc 0x050c 3 1
+#define MX6UL_PAD_LCD_DATA10__EIM_DATA02		0x0140 0x03cc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15		0x0140 0x03cc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10		0x0140 0x03cc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX		0x0140 0x03cc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x0144 0x03d0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK		0x0144 0x03d0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA11__CA7_MX6UL_TRACE11		0x0144 0x03d0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19		0x0144 0x03d0 0x0510 3 1
+#define MX6UL_PAD_LCD_DATA11__EIM_DATA03		0x0144 0x03d0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16		0x0144 0x03d0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11		0x0144 0x03d0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX		0x0144 0x03d0 0x0588 8 2
+#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x0148 0x03d4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC		0x0148 0x03d4 0x060c 1 1
+#define MX6UL_PAD_LCD_DATA12__CA7_MX6UL_TRACE12		0x0148 0x03d4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20		0x0148 0x03d4 0x0514 3 1
+#define MX6UL_PAD_LCD_DATA12__EIM_DATA04		0x0148 0x03d4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17		0x0148 0x03d4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12		0x0148 0x03d4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY		0x0148 0x03d4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x014c 0x03d8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK		0x014c 0x03d8 0x0608 1 1
+#define MX6UL_PAD_LCD_DATA13__CA7_MX6UL_TRACE13		0x014c 0x03d8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21		0x014c 0x03d8 0x0518 3 1
+#define MX6UL_PAD_LCD_DATA13__EIM_DATA05		0x014c 0x03d8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18		0x014c 0x03d8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13		0x014c 0x03d8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B		0x014c 0x03d8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x0150 0x03dc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA		0x0150 0x03dc 0x0604 1 1
+#define MX6UL_PAD_LCD_DATA14__CA7_MX6UL_TRACE14		0x0150 0x03dc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22		0x0150 0x03dc 0x051c 3 1
+#define MX6UL_PAD_LCD_DATA14__EIM_DATA06		0x0150 0x03dc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19		0x0150 0x03dc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14		0x0150 0x03dc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4		0x0150 0x03dc 0x068c 8 0
+#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x0154 0x03e0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA		0x0154 0x03e0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA15__CA7_MX6UL_TRACE15		0x0154 0x03e0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23		0x0154 0x03e0 0x0520 3 1
+#define MX6UL_PAD_LCD_DATA15__EIM_DATA07		0x0154 0x03e0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20		0x0154 0x03e0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15		0x0154 0x03e0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5		0x0154 0x03e0 0x0690 8 0
+#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x0158 0x03e4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX		0x0158 0x03e4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX		0x0158 0x03e4 0x0654 1 2
+#define MX6UL_PAD_LCD_DATA16__CA7_MX6UL_TRACE_CLK	0x0158 0x03e4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01		0x0158 0x03e4 0x04d4 3 1
+#define MX6UL_PAD_LCD_DATA16__EIM_DATA08		0x0158 0x03e4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21		0x0158 0x03e4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24		0x0158 0x03e4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6		0x0158 0x03e4 0x0694 8 0
+#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x015c 0x03e8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX		0x015c 0x03e8 0x0654 1 3
+#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX		0x015c 0x03e8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA17__CA7_MX6UL_TRACE_CTL	0x015c 0x03e8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00		0x015c 0x03e8 0x04d0 3 1
+#define MX6UL_PAD_LCD_DATA17__EIM_DATA09		0x015c 0x03e8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22		0x015c 0x03e8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25		0x015c 0x03e8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7		0x015c 0x03e8 0x0698 8 0
+#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18		0x0160 0x03ec 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA18__PWM5_OUT			0x0160 0x03ec 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO		0x0160 0x03ec 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10		0x0160 0x03ec 0x04ec 3 1
+#define MX6UL_PAD_LCD_DATA18__EIM_DATA10		0x0160 0x03ec 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23		0x0160 0x03ec 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26		0x0160 0x03ec 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD		0x0160 0x03ec 0x0678 8 1
+#define MX6UL_PAD_LCD_DATA19__EIM_DATA11		0x0164 0x03f0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24		0x0164 0x03f0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27		0x0164 0x03f0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK		0x0164 0x03f0 0x0670 8 1
+#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19		0x0164 0x03f0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA19__PWM6_OUT			0x0164 0x03f0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY		0x0164 0x03f0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11		0x0164 0x03f0 0x04f0 3 1
+#define MX6UL_PAD_LCD_DATA20__EIM_DATA12		0x0168 0x03f4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25		0x0168 0x03f4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28		0x0168 0x03f4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0		0x0168 0x03f4 0x067c 8 1
+#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20		0x0168 0x03f4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX		0x0168 0x03f4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX		0x0168 0x03f4 0x065c 1 2
+#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK		0x0168 0x03f4 0x0534 2 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12		0x0168 0x03f4 0x04f4 3 1
+#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21		0x016c 0x03f8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX		0x016c 0x03f8 0x065c 1 3
+#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX		0x016c 0x03f8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0		0x016c 0x03f8 0x0540 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13		0x016c 0x03f8 0x04f8 3 1
+#define MX6UL_PAD_LCD_DATA21__EIM_DATA13		0x016c 0x03f8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26		0x016c 0x03f8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29		0x016c 0x03f8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1		0x016c 0x03f8 0x0680 8 1
+#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22		0x0170 0x03fc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT			0x0170 0x03fc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI		0x0170 0x03fc 0x053c 2 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14		0x0170 0x03fc 0x04fc 3 1
+#define MX6UL_PAD_LCD_DATA22__EIM_DATA14		0x0170 0x03fc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27		0x0170 0x03fc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30		0x0170 0x03fc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2		0x0170 0x03fc 0x0684 8 0
+#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23		0x0174 0x0400 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA23__MQS_LEFT			0x0174 0x0400 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO		0x0174 0x0400 0x0538 2 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15		0x0174 0x0400 0x0500 3 1
+#define MX6UL_PAD_LCD_DATA23__EIM_DATA15		0x0174 0x0400 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28		0x0174 0x0400 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31		0x0174 0x0400 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3		0x0174 0x0400 0x0688 8 1
+#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B		0x0178 0x0404 0x0000 0 0
+#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x0178 0x0404 0x0670 1 2
+#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK		0x0178 0x0404 0x0000 2 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00			0x0178 0x0404 0x05d0 3 1
+#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00			0x0178 0x0404 0x0000 4 0
+#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00			0x0178 0x0404 0x0000 5 0
+#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2			0x0178 0x0404 0x0000 8 0
+#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B		0x017c 0x0408 0x0000 0 0
+#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x017c 0x0408 0x0678 1 2
+#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B		0x017c 0x0408 0x0000 2 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00			0x017c 0x0408 0x05c4 3 1
+#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01			0x017c 0x0408 0x0000 4 0
+#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01			0x017c 0x0408 0x0000 5 0
+#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3			0x017c 0x0408 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00		0x0180 0x040c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x0180 0x040c 0x067c 1 2
+#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B		0x0180 0x040c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01		0x0180 0x040c 0x05d4 3 1
+#define MX6UL_PAD_NAND_DATA00__EIM_AD08			0x0180 0x040c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02		0x0180 0x040c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY		0x0180 0x040c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01		0x0184 0x0410 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x0184 0x0410 0x0680 1 2
+#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS		0x0184 0x0410 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01		0x0184 0x0410 0x05c8 3 1
+#define MX6UL_PAD_NAND_DATA01__EIM_AD09			0x0184 0x0410 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03		0x0184 0x0410 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1		0x0184 0x0410 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02		0x0188 0x0414 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x0188 0x0414 0x0684 1 1
+#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00		0x0188 0x0414 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02		0x0188 0x0414 0x05d8 3 1
+#define MX6UL_PAD_NAND_DATA02__EIM_AD10			0x0188 0x0414 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04		0x0188 0x0414 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2		0x0188 0x0414 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03		0x018c 0x0418 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x018c 0x0418 0x0688 1 2
+#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01		0x018c 0x0418 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02		0x018c 0x0418 0x05cc 3 1
+#define MX6UL_PAD_NAND_DATA03__EIM_AD11			0x018c 0x0418 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05		0x018c 0x0418 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3		0x018c 0x0418 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04		0x0190 0x041c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x0190 0x041c 0x068c 1 1
+#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02		0x0190 0x041c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK		0x0190 0x041c 0x0564 3 1
+#define MX6UL_PAD_NAND_DATA04__EIM_AD12			0x0190 0x041c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06		0x0190 0x041c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX		0x0190 0x041c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX		0x0190 0x041c 0x062c 8 2
+#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05		0x0194 0x0420 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x0194 0x0420 0x0690 1 1
+#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03		0x0194 0x0420 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI		0x0194 0x0420 0x056c 3 1
+#define MX6UL_PAD_NAND_DATA05__EIM_AD13			0x0194 0x0420 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07		0x0194 0x0420 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX		0x0194 0x0420 0x062c 8 3
+#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX		0x0194 0x0420 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06		0x0198 0x0424 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x0198 0x0424 0x0694 1 1
+#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK		0x0198 0x0424 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO		0x0198 0x0424 0x0568 3 1
+#define MX6UL_PAD_NAND_DATA06__EIM_AD14			0x0198 0x0424 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08		0x0198 0x0424 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS		0x0198 0x0424 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS		0x0198 0x0424 0x0628 8 4
+#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07		0x019c 0x0428 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x019c 0x0428 0x0698 1 1
+#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B		0x019c 0x0428 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0		0x019c 0x0428 0x0570 3 1
+#define MX6UL_PAD_NAND_DATA07__EIM_AD15			0x019c 0x0428 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09		0x019c 0x0428 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS		0x019c 0x0428 0x0628 8 5
+#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS		0x019c 0x0428 0x0000 8 0
+#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE			0x01a0 0x042c 0x0000 0 0
+#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B		0x01a0 0x042c 0x0000 1 0
+#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS			0x01a0 0x042c 0x0000 2 0
+#define MX6UL_PAD_NAND_ALE__PWM3_OUT			0x01a0 0x042c 0x0000 3 0
+#define MX6UL_PAD_NAND_ALE__EIM_ADDR17			0x01a0 0x042c 0x0000 4 0
+#define MX6UL_PAD_NAND_ALE__GPIO4_IO10			0x01a0 0x042c 0x0000 5 0
+#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1			0x01a0 0x042c 0x0000 8 0
+#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B		0x01a4 0x0430 0x0000 0 0
+#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B		0x01a4 0x0430 0x0000 1 0
+#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK		0x01a4 0x0430 0x0000 2 0
+#define MX6UL_PAD_NAND_WP_B__PWM4_OUT			0x01a4 0x0430 0x0000 3 0
+#define MX6UL_PAD_NAND_WP_B__EIM_BCLK			0x01a4 0x0430 0x0000 4 0
+#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11			0x01a4 0x0430 0x0000 5 0
+#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY			0x01a4 0x0430 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B		0x01a8 0x0434 0x0000 0 0
+#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4		0x01a8 0x0434 0x0000 1 0
+#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00		0x01a8 0x0434 0x0000 2 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0		0x01a8 0x0434 0x0560 3 1
+#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B		0x01a8 0x0434 0x0000 4 0
+#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x01a8 0x0434 0x0000 5 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX		0x01a8 0x0434 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX		0x01a8 0x0434 0x0634 8 2
+#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B		0x01ac 0x0438 0x0000 0 0
+#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5		0x01ac 0x0438 0x0000 1 0
+#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01		0x01ac 0x0438 0x0000 2 0
+#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK		0x01ac 0x0438 0x0554 3 1
+#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B		0x01ac 0x0438 0x0000 4 0
+#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13		0x01ac 0x0438 0x0000 5 0
+#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX		0x01ac 0x0438 0x0634 8 3
+#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX		0x01ac 0x0438 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B		0x01b0 0x043c 0x0000 0 0
+#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6		0x01b0 0x043c 0x0000 1 0
+#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02		0x01b0 0x043c 0x0000 2 0
+#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI		0x01b0 0x043c 0x055c 3 1
+#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18		0x01b0 0x043c 0x0000 4 0
+#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14		0x01b0 0x043c 0x0000 5 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS		0x01b0 0x043c 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS		0x01b0 0x043c 0x0630 8 2
+#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE			0x01b4 0x0440 0x0000 0 0
+#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7		0x01b4 0x0440 0x0000 1 0
+#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03		0x01b4 0x0440 0x0000 2 0
+#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO			0x01b4 0x0440 0x0558 3 1
+#define MX6UL_PAD_NAND_CLE__EIM_ADDR16			0x01b4 0x0440 0x0000 4 0
+#define MX6UL_PAD_NAND_CLE__GPIO4_IO15			0x01b4 0x0440 0x0000 5 0
+#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS		0x01b4 0x0440 0x0630 8 3
+#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS		0x01b4 0x0440 0x0000 8 0
+#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS			0x01b8 0x0444 0x0000 0 0
+#define MX6UL_PAD_NAND_DQS__CSI_FIELD			0x01b8 0x0444 0x0530 1 1
+#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B		0x01b8 0x0444 0x0000 2 0
+#define MX6UL_PAD_NAND_DQS__PWM5_OUT			0x01b8 0x0444 0x0000 3 0
+#define MX6UL_PAD_NAND_DQS__EIM_WAIT			0x01b8 0x0444 0x0000 4 0
+#define MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x01b8 0x0444 0x0000 5 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01		0x01b8 0x0444 0x0614 6 1
+#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK		0x01b8 0x0444 0x061c 8 1
+#define MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x01bc 0x0448 0x0000 0 0
+#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1		0x01bc 0x0448 0x0000 1 0
+#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC			0x01bc 0x0448 0x0000 2 0
+#define MX6UL_PAD_SD1_CMD__SPDIF_OUT			0x01bc 0x0448 0x0000 3 0
+#define MX6UL_PAD_SD1_CMD__EIM_ADDR19			0x01bc 0x0448 0x0000 4 0
+#define MX6UL_PAD_SD1_CMD__GPIO2_IO16			0x01bc 0x0448 0x0000 5 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00		0x01bc 0x0448 0x0610 6 2
+#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR			0x01bc 0x0448 0x0000 8 0
+#define MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x01c0 0x044c 0x0000 0 0
+#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2		0x01c0 0x044c 0x0000 1 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK			0x01c0 0x044c 0x05f0 2 1
+#define MX6UL_PAD_SD1_CLK__SPDIF_IN			0x01c0 0x044c 0x0618 3 3
+#define MX6UL_PAD_SD1_CLK__EIM_ADDR20			0x01c0 0x044c 0x0000 4 0
+#define MX6UL_PAD_SD1_CLK__GPIO2_IO17			0x01c0 0x044c 0x0000 5 0
+#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC			0x01c0 0x044c 0x0664 8 2
+#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x01c4 0x0450 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3		0x01c4 0x0450 0x0000 1 0
+#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC		0x01c4 0x0450 0x05fc 2 1
+#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX		0x01c4 0x0450 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21			0x01c4 0x0450 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18			0x01c4 0x0450 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID		0x01c4 0x0450 0x04b8 8 2
+#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x01c8 0x0454 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA1__GPT2_CLK			0x01c8 0x0454 0x05a0 1 1
+#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK		0x01c8 0x0454 0x05f8 2 1
+#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX		0x01c8 0x0454 0x0584 3 3
+#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22			0x01c8 0x0454 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19			0x01c8 0x0454 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR		0x01c8 0x0454 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x01cc 0x0458 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1		0x01cc 0x0458 0x0598 1 1
+#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA		0x01cc 0x0458 0x05f4 2 1
+#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX		0x01cc 0x0458 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23			0x01cc 0x0458 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20			0x01cc 0x0458 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1			0x01cc 0x0458 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC		0x01cc 0x0458 0x0660 8 2
+#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x01d0 0x045c 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2		0x01d0 0x045c 0x059c 1 1
+#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA		0x01d0 0x045c 0x0000 2 0
+#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX		0x01d0 0x045c 0x0588 3 3
+#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24			0x01d0 0x045c 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21			0x01d0 0x045c 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2			0x01d0 0x045c 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID		0x01d0 0x045c 0x04bc 8 2
+#define MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x01d4 0x0460 0x0000 0 0
+#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B			0x01d4 0x0460 0x0674 1 0
+#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B		0x01d4 0x0460 0x0000 2 0
+#define MX6UL_PAD_CSI_MCLK__I2C1_SDA			0x01d4 0x0460 0x05a8 3 0
+#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B			0x01d4 0x0460 0x0000 4 0
+#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17			0x01d4 0x0460 0x0000 5 0
+#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL		0x01d4 0x0460 0x0000 6 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX		0x01d4 0x0460 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX		0x01d4 0x0460 0x064c 8 0
+#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x01d8 0x0464 0x0528 0 1
+#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP			0x01d8 0x0464 0x069c 1 2
+#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B		0x01d8 0x0464 0x0000 2 0
+#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL			0x01d8 0x0464 0x05a4 3 2
+#define MX6UL_PAD_CSI_PIXCLK__EIM_OE			0x01d8 0x0464 0x0000 4 0
+#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18		0x01d8 0x0464 0x0000 5 0
+#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5		0x01d8 0x0464 0x0000 6 0
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX		0x01d8 0x0464 0x064c 8 3
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX		0x01d8 0x0464 0x0000 8 0
+#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x01dc 0x0468 0x052c 0 0
+#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK			0x01dc 0x0468 0x0670 1 0
+#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK		0x01dc 0x0468 0x0000 2 0
+#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA			0x01dc 0x0468 0x05b0 3 0
+#define MX6UL_PAD_CSI_VSYNC__EIM_RW			0x01dc 0x0468 0x0000 4 0
+#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19			0x01dc 0x0468 0x0000 5 0
+#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT			0x01dc 0x0468 0x0000 6 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS		0x01dc 0x0468 0x0648 8 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS		0x01dc 0x0468 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x01e0 0x046c 0x0524 0 0
+#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD			0x01e0 0x046c 0x0678 1 0
+#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD		0x01e0 0x046c 0x0000 2 0
+#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL			0x01e0 0x046c 0x05ac 3 0
+#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B			0x01e0 0x046c 0x0000 4 0
+#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20			0x01e0 0x046c 0x0000 5 0
+#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT			0x01e0 0x046c 0x0000 6 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS		0x01e0 0x046c 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS		0x01e0 0x046c 0x0648 8 1
+#define MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x01e4 0x0470 0x04c4 0 0
+#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0		0x01e4 0x0470 0x067c 1 0
+#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B		0x01e4 0x0470 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK		0x01e4 0x0470 0x0544 3 0
+#define MX6UL_PAD_CSI_DATA00__EIM_AD00			0x01e4 0x0470 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21		0x01e4 0x0470 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT		0x01e4 0x0470 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX		0x01e4 0x0470 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX		0x01e4 0x0470 0x0644 8 0
+#define MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x01e8 0x0474 0x04c8 0 0
+#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1		0x01e8 0x0474 0x0680 1 0
+#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN		0x01e8 0x0474 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0		0x01e8 0x0474 0x0550 3 0
+#define MX6UL_PAD_CSI_DATA01__EIM_AD01			0x01e8 0x0474 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x01e8 0x0474 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK			0x01e8 0x0474 0x05e0 6 0
+#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX		0x01e8 0x0474 0x0644 8 1
+#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX		0x01e8 0x0474 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x01ec 0x0478 0x04d8 0 1
+#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2		0x01ec 0x0478 0x0684 1 2
+#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD		0x01ec 0x0478 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI		0x01ec 0x0478 0x054c 3 1
+#define MX6UL_PAD_CSI_DATA02__EIM_AD02			0x01ec 0x0478 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x01ec 0x0478 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC		0x01ec 0x0478 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS		0x01ec 0x0478 0x0640 8 5
+#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS		0x01ec 0x0478 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x01f0 0x047c 0x04cc 0 0
+#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3		0x01f0 0x047c 0x0688 1 0
+#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0x01f0 0x047c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO		0x01f0 0x047c 0x0548 3 0
+#define MX6UL_PAD_CSI_DATA03__EIM_AD03			0x01f0 0x047c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24		0x01f0 0x047c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK		0x01f0 0x047c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS		0x01f0 0x047c 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS		0x01f0 0x047c 0x0640 8 0
+#define MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x01f4 0x0480 0x04dc 0 1
+#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4		0x01f4 0x0480 0x068c 1 2
+#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x01f4 0x0480 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK		0x01f4 0x0480 0x0534 3 1
+#define MX6UL_PAD_CSI_DATA04__EIM_AD04			0x01f4 0x0480 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25		0x01f4 0x0480 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC		0x01f4 0x0480 0x05ec 6 1
+#define MX6UL_PAD_CSI_DATA04__USDHC1_WP			0x01f4 0x0480 0x066c 8 2
+#define MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x01f8 0x0484 0x04e0 0 1
+#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5		0x01f8 0x0484 0x0690 1 2
+#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0x01f8 0x0484 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0		0x01f8 0x0484 0x0540 3 1
+#define MX6UL_PAD_CSI_DATA05__EIM_AD05			0x01f8 0x0484 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x01f8 0x0484 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK		0x01f8 0x0484 0x05e8 6 1
+#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B		0x01f8 0x0484 0x0668 8 2
+#define MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x01fc 0x0488 0x04e4 0 1
+#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6		0x01fc 0x0488 0x0694 1 2
+#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0x01fc 0x0488 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x01fc 0x0488 0x053c 3 1
+#define MX6UL_PAD_CSI_DATA06__EIM_AD06			0x01fc 0x0488 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27		0x01fc 0x0488 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA		0x01fc 0x0488 0x05e4 6 1
+#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B		0x01fc 0x0488 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x0200 0x048c 0x04e8 0 1
+#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7		0x0200 0x048c 0x0698 1 2
+#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0x0200 0x048c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO		0x0200 0x048c 0x0538 3 1
+#define MX6UL_PAD_CSI_DATA07__EIM_AD07			0x0200 0x048c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28		0x0200 0x048c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA		0x0200 0x048c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT		0x0200 0x048c 0x0000 8 0
+
+#endif /* __DTS_IMX6UL_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx6ul-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ul-u-boot.dtsi
new file mode 100644
index 000000000..eb190cf8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul-u-boot.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/ {
+	soc {
+		u-boot,dm-spl;
+	};
+};
+
+&aips1 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ul.dtsi b/roms/u-boot/arch/arm/dts/imx6ul.dtsi
new file mode 100644
index 000000000..5644b0f34
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ul.dtsi
@@ -0,0 +1,1055 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		sai1 = &sai1;
+		sai2 = &sai2;
+		sai3 = &sai3;
+		spi0 = &qspi;
+		spi1 = &ecspi1;
+		spi2 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			operating-points = <
+				/* kHz	uV */
+				696000	1275000
+				528000	1175000
+				396000	1025000
+				198000	950000
+			>;
+			fsl,soc-operating-points = <
+				/* KHz	uV */
+				696000	1275000
+				528000	1175000
+				396000	1175000
+				198000	1175000
+			>;
+			clocks = <&clks IMX6UL_CLK_ARM>,
+				 <&clks IMX6UL_CLK_PLL2_BUS>,
+				 <&clks IMX6UL_CLK_PLL2_PFD2>,
+				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
+				 <&clks IMX6UL_CLK_STEP>,
+				 <&clks IMX6UL_CLK_PLL1_SW>,
+				 <&clks IMX6UL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
+				      "secondary_sel", "step", "pll1_sw",
+				      "pll1_sys";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	intc: interrupt-controller@a01000 {
+		compatible = "arm,gic-400", "arm,cortex-a7-gic";
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupt-parent = <&intc>;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a02000 0x2000>,
+		      <0x00a04000 0x2000>,
+		      <0x00a06000 0x2000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+		status = "disabled";
+	};
+
+	ckil: clock-cli {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	tempmon: tempmon {
+		compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,tempmon = <&anatop>;
+		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+		nvmem-cell-names = "calib", "temp_grade";
+		clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+		};
+
+		dma_apbh: dma-apbh@1804000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6UL_CLK_APBHDMA>;
+		};
+
+		gpmi: gpmi-nand@1806000 {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+				 <&clks IMX6UL_CLK_GPMI_APB>,
+				 <&clks IMX6UL_CLK_GPMI_BCH>,
+				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6UL_CLK_PER_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: aips-bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI1>,
+						 <&clks IMX6UL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI2>,
+						 <&clks IMX6UL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI3>,
+						 <&clks IMX6UL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI4>,
+						 <&clks IMX6UL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart7: serial@2018000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+						 <&clks IMX6UL_CLK_UART7_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+						 <&clks IMX6UL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart8: serial@2024000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+						 <&clks IMX6UL_CLK_UART8_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+						 <&clks IMX6UL_CLK_SAI1>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 35 24 0>,
+					       <&sdma 36 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+						 <&clks IMX6UL_CLK_SAI2>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 37 24 0>,
+					       <&sdma 38 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+						 <&clks IMX6UL_CLK_SAI3>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 39 24 0>,
+					       <&sdma 40 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			tsc: tsc@2040000 {
+				compatible = "fsl,imx6ul-tsc";
+				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_ADC2>;
+				clock-names = "tsc", "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM1>,
+					 <&clks IMX6UL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM2>,
+					 <&clks IMX6UL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM3>,
+					 <&clks IMX6UL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM4>,
+					 <&clks IMX6UL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			can1: flexcan@2090000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
+					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+				status = "disabled";
+			};
+
+			can2: flexcan@2094000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
+					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+				status = "disabled";
+			};
+
+			gpt1: gpt@2098000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
+					      <&iomuxc 16 33 16>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 65 29>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
+			};
+
+			fec2: ethernet@20b4000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x020b4000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			kpp: kpp@20b8000 {
+				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@20bc000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG1>;
+			};
+
+			wdog2: wdog@20c0000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: ccm@20c4000 {
+				compatible = "fsl,imx6ul-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx6ul-snvs-lpgpr";
+				};
+			};
+
+			epit1: epit@20d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@20d8000 {
+				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: iomuxc@20e0000 {
+				compatible = "fsl,imx6ul-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6ul-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			gpt2: gpt@20e8000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
+					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			sdma: sdma@20ec000 {
+				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
+					     "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pwm5: pwm@20f0000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM5>,
+					 <&clks IMX6UL_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm6: pwm@20f4000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM6>,
+					 <&clks IMX6UL_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm7: pwm@20f8000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM7>,
+					 <&clks IMX6UL_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm8: pwm@20fc000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM8>,
+					 <&clks IMX6UL_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		aips2: aips-bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: caam@2140000 {
+				compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2140000 0x3c000>;
+				ranges = <0 0x2140000 0x3c000>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>,
+					 <&clks IMX6UL_CLK_CAAM_MEM>;
+				clock-names = "ipg", "aclk", "mem";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr2@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			fec1: ethernet@2188000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET_REF>,
+					 <&clks IMX6UL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@2190000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@2194000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			adc1: adc@2198000 {
+				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ADC1>;
+				num-channels = <2>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			memory-controller@21b0000 {
+				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_EIM>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp-ctrl@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6UL_CLK_OCOTP>;
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			lcdif: lcdif@21c8000 {
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				reg = <0x021c8000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
+					 <&clks IMX6UL_CLK_LCDIF_APB>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			qspi: spi@21e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_QSPI>,
+					 <&clks IMX6UL_CLK_QSPI>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			wdog3: wdog@21e4000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x021e4000 0x4000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG3>;
+				status = "disabled";
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+					 <&clks IMX6UL_CLK_UART2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+					 <&clks IMX6UL_CLK_UART3_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+					 <&clks IMX6UL_CLK_UART4_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+					 <&clks IMX6UL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C4>;
+				status = "disabled";
+			};
+
+			uart6: serial@21fc000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021fc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+					 <&clks IMX6UL_CLK_UART6_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-14x14-evk.dts b/roms/u-boot/arch/arm/dts/imx6ull-14x14-evk.dts
new file mode 100644
index 000000000..74aaa8a56
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-14x14-evk.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6ull.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
+	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	assigned-clock-rates = <320000000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-colibri-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-colibri-u-boot.dtsi
new file mode 100644
index 000000000..afdb0f43c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-colibri-u-boot.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/ {
+	aliases {
+		u-boot,dm-pre-reloc;
+		mmc0 = &usdhc1;
+		usb0 = &usbotg1; /* required for ums */
+		display0 = &lcdif;
+	};
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart1_ctrl1 {
+	u-boot,dm-pre-reloc;
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "okay";
+	display = <&display0>;
+	u-boot,dm-pre-reloc;
+
+	display0: display0 {
+		bits-per-pixel = <18>;
+		bus-width = <24>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing_vga>;
+			timing_vga: 640x480 {
+				u-boot,dm-pre-reloc;
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <24>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+
+				de-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-colibri.dts b/roms/u-boot/arch/arm/dts/imx6ull-colibri.dts
new file mode 100644
index 000000000..15338a1ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-colibri.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018-2019 Toradex AG
+ */
+
+#include "imx6ull-colibri.dtsi"
+#include "imx6ull-colibri-u-boot.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL";
+	compatible = "toradex,colibri-imx6ull", "fsl,imx6ull";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-colibri.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-colibri.dtsi
new file mode 100644
index 000000000..b7bf79f28
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-colibri.dtsi
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6ull.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-gpio";
+		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
+		regulator-always-on;
+		regulator-name = "+V3.3_1.8_SD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x1 3300000 0x0>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; /* USBH_PEN */
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	num-channels = <10>;
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+/* Colibri SPI */
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+};
+
+/* Ethernet */
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+/* NAND */
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+	status = "okay";
+};
+
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	ad7879@2c {
+		compatible = "adi,ad7879-1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
+		reg = <0x2c>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	#pwm-cells = <3>;
+};
+
+/* PWM <B> */
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	#pwm-cells = <3>;
+};
+
+/* PWM <C> */
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	#pwm-cells = <3>;
+};
+
+/* PWM <D> */
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	#pwm-cells = <3>;
+};
+
+&sdma {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+/* Colibri UART_C */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,dte-mode;
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	dr_mode = "host";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can_int: canint-grp {
+		fsl,pins = <
+			/* SODIMM 73 */
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0X14
+		>;
+	};
+
+	pinctrl_enet2: enet2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1-cs-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x000a0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpio-bl-on-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x000a0
+		>;
+	};
+
+	pinctrl_gpio1: gpio1-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x74 /* SODIMM 55 */
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0x74 /* SODIMM 63 */
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0X14 /* SODIMM 77 */
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x14 /* SODIMM 99 */
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x14 /* SODIMM 133 */
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x14 /* SODIMM 135 */
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x14 /* SODIMM 100 */
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x14 /* SODIMM 102 */
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x14 /* SODIMM 104 */
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x14 /* SODIMM 186 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2-grp { /* Camera */
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x74 /* SODIMM 69 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x14 /* SODIMM 75 */
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x14 /* SODIMM 85 */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x14 /* SODIMM 96 */
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x14 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3-grp { /* CAN2 */
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x14 /* SODIMM 178 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x14 /* SODIMM 188 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4-grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x74 /* SODIMM 65 */
+		>;
+	};
+
+	pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x74 /* SODIMM 106 */
+		>;
+	};
+
+	pinctrl_gpio6: gpio6-grp { /* Wifi pins */
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x14 /* SODIMM 89 */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x14 /* SODIMM 79 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x14 /* SODIMM 81 */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x14 /* SODIMM 97 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x14 /* SODIMM 101 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x14 /* SODIMM 103 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x14 /* SODIMM 94 */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdif-dat-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x00079
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x00079
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x00079
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x00079
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x00079
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x00079
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x00079
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x00079
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x00079
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x00079
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x00079
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x00079
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x00079
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x00079
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x00079
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x00079
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x00079
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x00079
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079
+		>;
+	};
+
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079
+		>;
+	};
+
+	pinctrl_pwm5: pwm5-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079
+		>;
+	};
+
+	pinctrl_pwm6: pwm6-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079
+		>;
+	};
+
+	pinctrl_pwm7: pwm7-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1
+			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x1b0b1 /* DCD */
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x1b0b1 /* DSR */
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x1b0b1 /* DTR */
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x1b0b1 /* RI */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1
+		>;
+	};
+	pinctrl_uart5: uart5-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh_reg: gpio-usbh-reg {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x1b0b1 /* SODIMM 129 USBH PEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170b9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170f9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x17059
+
+			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x14
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_snvs_gpio1: snvs-gpio1-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x14 /* SODIMM 93 */
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x14 /* SODIMM 95 */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x74 /* SODIMM 105 */
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x14 /* SODIMM 131 USBH OC */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x74 /* SODIMM 138 */
+		>;
+	};
+
+	pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x74 /* SODIMM 107 */
+		>;
+	};
+
+	pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14 /* SODIMM 127 */
+		>;
+	};
+
+	pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0
+		>;
+	};
+
+	pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x4001b8b0
+		>;
+	};
+
+	pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
+		>;
+	};
+
+	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130b0
+		>;
+	};
+
+	pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* CD */
+		>;
+	};
+
+	pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-dart-6ul.dts b/roms/u-boot/arch/arm/dts/imx6ull-dart-6ul.dts
new file mode 100644
index 000000000..9e217ba09
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-dart-6ul.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ * Copyright (C) 2021 Marc Ferland, Amotus Solutions Inc., <ferlandm@amotus.ca>
+ */
+
+/dts-v1/;
+
+#include "imx6ull.dtsi"
+#include "imx6ull-dart-6ul.dtsi"
+
+/ {
+	model = "Variscite DART-6UL Evaluation Kit";
+	compatible = "variscite,imx6ull-dart-6ul", "fsl,imx6ull";
+};
+
+&mdio1 {
+	/* KSZ8081RNB (carrier-board) */
+	ethphy1: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		micrel,led-mode = <1>;
+		max-speed = <100>;
+		reg = <3>;
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_rst>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2_mdio: mdio_enet2_grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet2_rst: enet2-rst-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-dart-6ul.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-dart-6ul.dtsi
new file mode 100644
index 000000000..fab926f5b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-dart-6ul.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ * Copyright (C) 2021 Marc Ferland, Amotus Solutions Inc., <ferlandm@amotus.ca>
+ */
+
+/ {
+	model = "Variscite DART-6UL i.MX6 Ultra Low Lite SOM";
+	compatible = "variscite,imx6ull-dart-6ul", "fsl,imx6ull";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom_som;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_rst &pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* KSZ8081RNB (SoM) */
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			micrel,led-mode = <1>;
+			max-speed = <100>;
+			reg = <1>;
+		};
+	};
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	fsl,no-blockmark-swap;
+	status = "disabled";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x400000>;
+	};
+
+	partition@400000 {
+		label = "uboot-env";
+		reg = <0x400000 0x100000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x0>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	eeprom_som: eeprom@50 {
+		u-boot,dm-pre-reloc;
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		status = "okay";
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	bus-width = <0x4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1-mdio-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__RAWNAND_DQS		0x0b0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2cgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL       0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA       0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1grp_gpio {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2cgrp {
+		u-boot,dm-pre-reloc;
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL       0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA       0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2grp_gpio {
+		u-boot,dm-pre-reloc;
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x1b8b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_enet1_rst: enet1-rst-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx-eval-u-boot.dts b/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx-eval-u-boot.dts
new file mode 100644
index 000000000..378e4fa58
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx-eval-u-boot.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+/ {
+	smbios {
+		compatible = "u-boot,sysinfo-smbios";
+
+		smbios {
+			system {
+				manufacturer = "MYiR";
+			};
+
+			baseboard {
+				manufacturer = "MYiR";
+			};
+
+			chassis {
+				manufacturer = "MYiR";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts b/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts
new file mode 100644
index 000000000..2fd69da02
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-myir-mys-6ulx.dtsi"
+#include "imx6ull-mys-6ulx-u-boot.dtsi"
+
+/ {
+	model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
+	compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi
new file mode 100644
index 000000000..d03694fea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "MYiR MYS-6ULX Single Board Computer";
+	compatible = "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vdd_5v>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_vdd_3v3>;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_vdd_3v3>;
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi
new file mode 100644
index 000000000..cd15d9ba8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+&pinctrl_uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpmi {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi
new file mode 100644
index 000000000..56cd16e5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 ULL";
+	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ gpioledssomgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
new file mode 100644
index 000000000..9648d4eca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
+	compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 000000000..ff08d95a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+&iomuxc {
+	/delete-node/ gpio_keysgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin.dtsi
new file mode 100644
index 000000000..c1595fc78
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-phytec-segin.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL";
+	compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ flexcan1engrp;
+	/delete-node/ rtcintgrp;
+	/delete-node/ stmpegrp;
+};
+
+&iomuxc_snvs {
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-pinfunc-snvs.h b/roms/u-boot/arch/arm/dts/imx6ull-pinfunc-snvs.h
new file mode 100644
index 000000000..54cfe7229
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-pinfunc-snvs.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2017 NXP
+ */
+
+#ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H
+#define __DTS_IMX6ULL_PINFUNC_SNVS_H
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10                          0x0000 0x0044 0x0000 0x5 0x0
+#define MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11                          0x0004 0x0048 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00                        0x0008 0x004C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01                        0x000C 0x0050 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02                        0x0010 0x0054 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03                        0x0014 0x0058 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04                        0x0018 0x005C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05                        0x001C 0x0060 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06                        0x0020 0x0064 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07                        0x0024 0x0068 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08                        0x0028 0x006C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09                        0x002C 0x0070 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-pinfunc.h b/roms/u-boot/arch/arm/dts/imx6ull-pinfunc.h
new file mode 100644
index 000000000..eb025a9d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-pinfunc.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6ULL_PINFUNC_H
+#define __DTS_IMX6ULL_PINFUNC_H
+
+#include "imx6ul-pinfunc.h"
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX                    0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX                    0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS                      0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX                    0x0084 0x0310 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX                    0x0084 0x0310 0x0644 0x9 0x4
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX                    0x0088 0x0314 0x0644 0x9 0x5
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX                    0x0088 0x0314 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS                     0x008C 0x0318 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS                     0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS                     0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS                     0x0090 0x031C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01                  0x00B8 0x0344 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02                  0x00BC 0x0348 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03                  0x00C0 0x034C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04                    0x00C4 0x0350 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05                    0x00C8 0x0354 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06                       0x00CC 0x0358 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07                    0x00D0 0x035C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08                    0x00D4 0x0360 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09                       0x00D8 0x0364 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED                       0x00DC 0x0368 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ                        0x00E0 0x036C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11                    0x00F0 0x037C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12                    0x00F4 0x0380 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13                       0x00F8 0x0384 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14                      0x00FC 0x0388 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15                       0x0100 0x038C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK                            0x0104 0x0390 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE                          0x0108 0x0394 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE                           0x010C 0x0398 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0                          0x0110 0x039C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE                           0x0114 0x03A0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00                        0x0118 0x03A4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01                        0x011C 0x03A8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02                        0x0120 0x03AC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03                        0x0124 0x03B0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04                        0x0128 0x03B4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05                        0x012C 0x03B8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06                        0x0130 0x03BC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07                        0x0134 0x03C0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR                         0x0150 0x03DC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL                          0x0154 0x03E0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK                         0x0158 0x03E4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP                          0x015C 0x03E8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1                         0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02                        0x0170 0x03FC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03                        0x0174 0x0400 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2                         0x01D4 0x0460 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3                       0x01D8 0x0464 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1                        0x01DC 0x0468 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1                            0x01E0 0x046C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+
+#endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull-dev-board.dts b/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull-dev-board.dts
new file mode 100644
index 000000000..ce03ddfd2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull-dev-board.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 Linumiz
+ * Author: Navin Sankar Velliangiri <navin@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi-imx6ull.dtsi"
+#include "imx6ull-seeed-npi-imx6ull-u-boot.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-imx6ull", "fsl,imx6ull";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull-u-boot.dtsi
new file mode 100644
index 000000000..054e1aa94
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 Linumiz
+ * Author: Navin Sankar Velliangiri <navin@linumiz.com>
+ */
+
+&pinctrl_uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpmi {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull.dtsi
new file mode 100644
index 000000000..b019474db
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-seeed-npi-imx6ull.dtsi
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 Linumiz
+ * Author: Navin Sankar Velliangiri <navin@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Seeed NPi-iMX6ULL Dev Board";
+	compatible = "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led {
+			label = "User";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_gpios>;
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-name = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_uart1: uart1grp {
+		fsl,pin = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pin = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__RAWNAND_DQS		0x0b0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b031
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-somlabs-visionsom.dts b/roms/u-boot/arch/arm/dts/imx6ull-somlabs-visionsom.dts
new file mode 100644
index 000000000..868f3f844
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-somlabs-visionsom.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017-2019 SoMLabs
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ull.dtsi"
+
+/ {
+	model = "SoMLabs VisionSOM-6ULL";
+	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usr0 {
+			label = "usr0";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		usr1 {
+			label = "usr1";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		usr2 {
+			label = "usr2";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+
+		usr3 {
+			label = "usr3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg1>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg2>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+	};
+};
+
+&cpu0 {
+	arm-supply = <&reg_arm>;
+	soc-supply = <&reg_soc>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+
+};
+
+&gpc {
+	fsl,cpu_pupscr_sw2iso = <0x1>;
+	fsl,cpu_pupscr_sw = <0x0>;
+	fsl,cpu_pdnscr_iso2sw = <0x1>;
+	fsl,cpu_pdnscr_iso = <0x1>;
+	fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	pinctrl_hog_1: hoggrp-1 {
+		fsl,pins = <
+			/* 32kHz low power reference clock for WiFi */
+			MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT	0x17099
+			/* LED 0..3 */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x17099
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x17099
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x17099
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x17099
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1F829
+
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x400010a9
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY	0x30b0
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x10b0
+		>;
+	};
+
+	pinctrl_usb_otg2: usbotg2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x10b0
+		>;
+	};
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+	tx-d-cal = <0x5>;
+};
+
+&usdhc2 {
+	non-removable;
+	disable-wp;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,wdog_b;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx6ull-u-boot.dtsi
new file mode 100644
index 000000000..74ca95fa2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ */
+
+/ {
+	soc {
+		u-boot,dm-spl;
+	};
+};
+
+&aips1 {
+	u-boot,dm-spl;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ull.dtsi b/roms/u-boot/arch/arm/dts/imx6ull.dtsi
new file mode 100644
index 000000000..22e4a307f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ull.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+#include "imx6ul.dtsi"
+#include "imx6ull-pinfunc.h"
+#include "imx6ull-pinfunc-snvs.h"
+
+/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
+/delete-node/ &uart8;
+/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
+/delete-node/ &crypto;
+
+&cpu0 {
+	operating-points = <
+		/* kHz	uV */
+		900000	1275000
+		792000	1225000
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		900000	1250000
+		792000	1175000
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
+&ocotp {
+	compatible = "fsl,imx6ull-ocotp", "syscon";
+};
+
+&usdhc1 {
+	compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+
+/ {
+	soc {
+		aips3: aips-bus@2200000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02200000 0x100000>;
+			ranges;
+
+			dcp: crypto@2280000 {
+				compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
+				reg = <0x02280000 0x4000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
+				clock-names = "dcp";
+			};
+
+			iomuxc_snvs: iomuxc-snvs@2290000 {
+				compatible = "fsl,imx6ull-iomuxc-snvs";
+				reg = <0x02290000 0x4000>;
+			};
+
+			uart8: serial@2288000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+					 <&clks IMX6UL_CLK_UART8_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ulz-14x14-evk.dts b/roms/u-boot/arch/arm/dts/imx6ulz-14x14-evk.dts
new file mode 100644
index 000000000..483d9732c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ulz-14x14-evk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+	model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+	compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+	/delete-node/ panel;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx6ulz.dtsi b/roms/u-boot/arch/arm/dts/imx6ulz.dtsi
new file mode 100644
index 000000000..aeb2ddc54
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx6ulz.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+		/delete-property/ i2c2;
+		/delete-property/ i2c3;
+		/delete-property/ serial4;
+		/delete-property/ serial5;
+		/delete-property/ serial6;
+		/delete-property/ serial7;
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+		/delete-property/ spi4;
+	};
+};
+
+/delete-node/ &adc1;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
diff --git a/roms/u-boot/arch/arm/dts/imx7-cm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx7-cm-u-boot.dtsi
new file mode 100644
index 000000000..c6970c51b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7-cm-u-boot.dtsi
@@ -0,0 +1,17 @@
+/{
+    aliases {
+        mmc0 = &usdhc1;
+    };
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7-cm.dts b/roms/u-boot/arch/arm/dts/imx7-cm.dts
new file mode 100644
index 000000000..da20a63ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7-cm.dts
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2021 Ronetix GmbH
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Ronetix iMX7-CM Board";
+	compatible = "ronetix,imx7-cm", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* DRAM size runtime extracted from the DDRC registers */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SD1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg2_pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_1>;
+	status = "okay";
+	ddrsmp=<0>;
+
+	flash0: mx25l25645g@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD card */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	tuning-step = <2>;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	wakeup-source;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	no-1-8-v;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__I2C1_SCL	0x4000007f
+			MX7D_PAD_I2C1_SDA__I2C1_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO				0x3
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC				0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4	0x14	/* ETH_RESET */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x59
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x59
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg_pwr {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14
+		>;
+	};
+
+	pinctrl_usbotg2_pwr: usbotg_pwr {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15 /* CD */
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* Vmmc */
+			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59 /* VSELECT */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD			0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK			0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD			0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK			0x1a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD			0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK			0x1b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+		>;
+	};
+
+	pinctrl_qspi1_1: qspi1grp_1 {
+			fsl,pins = <
+				MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 	0x51
+				MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 	0x51
+				MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 	0x51
+				MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 	0x51
+				MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 	0x51
+				MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 	0x51
+			>;
+		};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7-colibri-emmc.dts b/roms/u-boot/arch/arm/dts/imx7-colibri-emmc.dts
new file mode 100644
index 000000000..854549827
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7-colibri-emmc.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/dts-v1/;
+#include "imx7-colibri.dtsi"
+#include "imx7-colibri-u-boot.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC)";
+	compatible = "toradex,imx7d-colibri-emmc", "fsl,imx7d";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc1;
+		display1 = &lcdif;
+		usb0 = &usbotg1; /* required for ums */
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
+		>;
+	};
+
+	pinctrl_usbh_reg: gpio-usbh-vbus {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14
+		>;
+	};
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	/*
+	 * usbotg1 on Colibri iMX7 can function in both host/otg modes.
+	 * Gadget stack currently does not look at this at all while
+	 * the host stack refuses to bind/load if it is not set to host
+	 * (it obviously won't be enumerated during usb start invocation
+	 * if dr_mode = "otg")
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7-colibri-rawnand.dts b/roms/u-boot/arch/arm/dts/imx7-colibri-rawnand.dts
new file mode 100644
index 000000000..5211fb1f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7-colibri-rawnand.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/dts-v1/;
+#include "imx7-colibri.dtsi"
+#include "imx7-colibri-u-boot.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S/D";
+	compatible = "toradex,imx7-colibri", "fsl,imx7";
+
+	aliases {
+		display1 = &lcdif;
+		usb0 = &usbotg1; /* required for ums */
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	fsl,use-minimum-ecc;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmi-nand-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
+			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
+			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
+			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
+			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
+			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
+			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
+			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
+			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
+			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+		>;
+	};
+
+	pinctrl_usbh_reg: gpio-usbh-vbus {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14
+		>;
+	};
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	/*
+	 * usbotg1 on Colibri iMX7 can function in both host/otg modes.
+	 * Gadget stack currently does not look at this at all while
+	 * the host stack refuses to bind/load if it is not set to host
+	 * (it obviously won't be enumerated during usb start invocation
+	 * if dr_mode = "otg")
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7-colibri-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx7-colibri-u-boot.dtsi
new file mode 100644
index 000000000..91386476d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7-colibri-u-boot.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+&lcdif {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	u-boot,dm-pre-reloc;
+
+	display0: display0 {
+		bits-per-pixel = <18>;
+		bus-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing_vga>;
+			timing_vga: 640x480 {
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <24>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+
+				de-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7-colibri.dtsi b/roms/u-boot/arch/arm/dts/imx7-colibri.dtsi
new file mode 100644
index 000000000..b352036e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7-colibri.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2016-2019 Toradex AG
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx7d.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	scl-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	rn5t567@33 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x33>;
+
+		regulators {
+			reg_DCDC1: DCDC1 {  /* V1.0_SOC */
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC2: DCDC2 { /* V1.1_ARM */
+				regulator-min-microvolt = <975000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC3: DCDC3 { /* V1.8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC4: DCDC4 { /* V1.35_DRAM */
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			reg_LDO2: LDO2 { /* +V1.8_SD */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO4: LDO4 { /* V1.8_LPSR */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	sda-gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+	scl-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet1>;
+	pinctrl-1 = <&pinctrl_enet1_sleep>;
+	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+		<&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_LDO1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	no-1-8-v;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c4: i2c4-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpio-grp {
+			fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8	0x4000007f
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79
+			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79
+			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* DCD */
+			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* DTR */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdif-dat-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14			0x14
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
+
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+		>;
+	};
+
+	pinctrl_enet1_sleep: enet1sleepgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
+			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
+			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
+
+			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
+			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
+			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
+			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
+			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x4000007f
+		>;
+	};
+
+	pinctrl_cd_usdhc1: usdhc1-cd-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7d-meerkat96.dts b/roms/u-boot/arch/arm/dts/imx7d-meerkat96.dts
new file mode 100644
index 000000000..dd8003bd1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-meerkat96.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "96Boards Meerkat96 Board";
+	compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	reg_wlreg_on: regulator-wlreg-on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlreg_on>;
+		regulator-name = "wlreg_on";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "green:user1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user4";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led5 {
+			label = "yellow:wlan";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "blue:bt";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	keep-power-in-suspend;
+	fsl,tuning-step = <2>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	broken-cd;
+	status = "okay";
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wlreg_on>;
+	vqmmc-supply =<&reg_3p3v>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_irq>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&iomuxc {
+	pinctrl_bt_gpios: btgpiosgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x59
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x1f
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x59
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA	0x4000007f
+			MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_DATA4__UART3_DCE_RX	0x79
+			MX7D_PAD_SD3_DATA5__UART3_DCE_TX	0x79
+			MX7D_PAD_SD3_DATA6__UART3_DCE_RTS	0x79
+			MX7D_PAD_SD3_DATA7__UART3_DCE_CTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__UART6_DCE_RX		0x79
+			MX7D_PAD_SD1_WP__UART6_DCE_TX		0x79
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX	0x79
+			MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX	0x79
+			MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS	0x79
+			MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0D
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+		>;
+	};
+
+	pinctrl_wlan_irq: wlanirqgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x19
+		>;
+	};
+
+	pinctrl_wlreg_on: wlregongrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x19
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7d-pico-hobbit.dts b/roms/u-boot/arch/arm/dts/imx7d-pico-hobbit.dts
new file mode 100644
index 000000000..98604f0fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-pico-hobbit.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX7D Board using Hobbit baseboard";
+	compatible = "technexion,imx7d-pico-hobbit", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_vref_1v8>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&ecspi3 {
+	ads7846@0 {
+		reg = <0>;
+		compatible = "ti,ads7846";
+		interrupt-parent = <&gpio2>;
+		interrupts = <7 0>;
+		spi-max-frequency = <1000000>;
+		pendown-gpio = <&gpio2 7 0>;
+		vcc-supply = <&reg_3p3v>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <4095>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4095>;
+		ti,pressure-max = /bits/ 16 <1024>;
+		ti,x-plate-ohms = /bits/ 16 <90>;
+		ti,y-plate-ohms = /bits/ 16 <90>;
+		ti,debounce-max = /bits/ 16 <70>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <2>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
\ No newline at end of file
diff --git a/roms/u-boot/arch/arm/dts/imx7d-pico-pi.dts b/roms/u-boot/arch/arm/dts/imx7d-pico-pi.dts
new file mode 100644
index 000000000..66ca59045
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-pico-pi.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX7D Board and PI baseboard";
+	compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_vref_1v8>;
+	};
+};
+
+&i2c4 {
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+
+};
\ No newline at end of file
diff --git a/roms/u-boot/arch/arm/dts/imx7d-pico-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx7d-pico-u-boot.dtsi
new file mode 100644
index 000000000..7307fbaf6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-pico-u-boot.dtsi
@@ -0,0 +1,87 @@
+/{
+    aliases {
+        mmc0 = &usdhc3;
+        usb0 = &usbotg1;
+        display0 = &lcdif;
+    };
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+ };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+	display = <&display0>;
+	u-boot,dm-pre-reloc;
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <11>;
+				hfront-porch = <11>;
+				vback-porch = <12>;
+				vfront-porch = <11>;
+				hsync-len = <46>;
+				vsync-len = <210>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+				interlaced =  <0>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_backlight: backlight {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x0
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x78
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x78
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x78
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14
+		>;
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7d-pico.dtsi b/roms/u-boot/arch/arm/dts/imx7d-pico.dtsi
new file mode 100644
index 000000000..57391fc05
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-pico.dtsi
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+#include "imx7d-pico-u-boot.dtsi"
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	reg_wlreg_on: regulator-wlreg_on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wlreg_on>;
+		regulator-name = "wlreg_on";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			status = "okay";
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 { /* Backlight */
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart7 { /* Bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	tuning-step = <2>;
+	vmmc-supply = <&reg_3p3v>;
+	wakeup-source;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 { /* Wifi SDIO */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wlreg_on>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	no-1-8-v;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__I2C1_SDA	0x4000007f
+			MX7D_PAD_UART1_RX_DATA__I2C1_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__I2C2_SDA	0x4000007f
+			MX7D_PAD_UART2_RX_DATA__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11                0x1  /* Ethernet reset */
+		>;
+	};
+
+	pinctrl_can1: can1frp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX	0x59
+			MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX	0x59
+		>;
+	};
+
+	pinctrl_can2: can2frp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX	0x59
+			MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_pwm1: pwm1 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
+		>;
+	};
+
+	pinctrl_pwm2: pwm2 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT   0x7f
+		>;
+	};
+
+	pinctrl_pwm3: pwm3 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT   0x7f
+		>;
+	};
+
+	pinctrl_reg_wlreg_on: regregongrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x59
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x79
+			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x79
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x79
+			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x79
+			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x79
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX	0x79
+			MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX	0x79
+			MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS	0x79
+			MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg_pwr {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wifi_clk: wificlkgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
+		>;
+	};
+};
\ No newline at end of file
diff --git a/roms/u-boot/arch/arm/dts/imx7d-pinfunc.h b/roms/u-boot/arch/arm/dts/imx7d-pinfunc.h
new file mode 100644
index 000000000..f2493bc63
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-pinfunc.h
@@ -0,0 +1,1158 @@
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX7D_PINFUNC_H
+#define __DTS_IMX7D_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0                       0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT                        0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY                  0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B                    0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB           0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1                       0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT                        0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3               0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK                       0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT                  0x0004 0x0034 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT                    0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2                       0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT                        0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1               0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK                       0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1                       0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT                    0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID                     0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3                       0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT                        0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2               0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK                       0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2                       0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT                    0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID                     0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4                       0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC                     0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4                  0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS                   0x0010 0x0040 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS                   0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL                        0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT                    0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5                       0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR                    0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5                  0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS                   0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS                   0x0014 0x0044 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA                        0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT                    0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6                       0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC                     0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6                  0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX                    0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX                    0x0018 0x0048 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL                        0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT                        0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4                        0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7                       0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR                    0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7                  0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX                    0x001C 0x004C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX                    0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA                        0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP                        0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4                        0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8                            0x0014 0x026C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT                          0x0014 0x026C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B                         0x0014 0x026C 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX                         0x0014 0x026C 0x0704 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX                         0x0014 0x026C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__I2C3_SCL                             0x0014 0x026C 0x05E4 0x4 0x0
+#define MX7D_PAD_GPIO1_IO08__KPP_COL5                             0x0014 0x026C 0x0608 0x6 0x0
+#define MX7D_PAD_GPIO1_IO08__PWM1_OUT                             0x0014 0x026C 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9                            0x0018 0x0270 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO09__SD1_LCTL                             0x0018 0x0270 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3                    0x0018 0x0270 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX                         0x0018 0x0270 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX                         0x0018 0x0270 0x0704 0x3 0x1
+#define MX7D_PAD_GPIO1_IO09__I2C3_SDA                             0x0018 0x0270 0x05E8 0x4 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY                       0x0018 0x0270 0x04F4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO09__KPP_ROW5                             0x0018 0x0270 0x0628 0x6 0x0
+#define MX7D_PAD_GPIO1_IO09__PWM2_OUT                             0x0018 0x0270 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10                           0x001C 0x0274 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO10__SD2_LCTL                             0x001C 0x0274 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO                           0x001C 0x0274 0x0568 0x2 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS                        0x001C 0x0274 0x0700 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS                        0x001C 0x0274 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__I2C4_SCL                             0x001C 0x0274 0x05EC 0x4 0x0
+#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA                       0x001C 0x0274 0x05A4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO10__KPP_COL6                             0x001C 0x0274 0x060C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO10__PWM3_OUT                             0x001C 0x0274 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11                           0x0020 0x0278 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO11__SD3_LCTL                             0x0020 0x0278 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO11__ENET1_MDC                            0x0020 0x0278 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS                        0x0020 0x0278 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS                        0x0020 0x0278 0x0700 0x3 0x1
+#define MX7D_PAD_GPIO1_IO11__I2C4_SDA                             0x0020 0x0278 0x05F0 0x4 0x0
+#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB                       0x0020 0x0278 0x05A8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO11__KPP_ROW6                             0x0020 0x0278 0x062C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO11__PWM4_OUT                             0x0020 0x0278 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12                           0x0024 0x027C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT                          0x0024 0x027C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1                    0x0024 0x027C 0x0564 0x2 0x0
+#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX                          0x0024 0x027C 0x04DC 0x3 0x0
+#define MX7D_PAD_GPIO1_IO12__CM4_NMI                              0x0024 0x027C 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1                         0x0024 0x027C 0x04E4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5                           0x0024 0x027C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID                          0x0024 0x027C 0x0734 0x7 0x0
+#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13                           0x0028 0x0280 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT                          0x0028 0x0280 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2                    0x0028 0x0280 0x0570 0x2 0x0
+#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX                          0x0028 0x0280 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY                       0x0028 0x0280 0x04F4 0x4 0x1
+#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2                         0x0028 0x0280 0x04E8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL                       0x0028 0x0280 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID                          0x0028 0x0280 0x0730 0x7 0x0
+#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14                           0x002C 0x0284 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO14__SD3_CD_B                             0x002C 0x0284 0x0738 0x1 0x0
+#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO                           0x002C 0x0284 0x0574 0x2 0x0
+#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX                          0x002C 0x0284 0x04E0 0x3 0x0
+#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B                         0x002C 0x0284 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3                         0x002C 0x0284 0x04EC 0x5 0x0
+#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0                      0x002C 0x0284 0x06D8 0x6 0x0
+#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15                           0x0030 0x0288 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO15__SD3_WP                               0x0030 0x0288 0x073C 0x1 0x0
+#define MX7D_PAD_GPIO1_IO15__ENET2_MDC                            0x0030 0x0288 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX                          0x0030 0x0288 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B                         0x0030 0x0288 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4                         0x0030 0x0288 0x04F0 0x5 0x0
+#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1                      0x0030 0x0288 0x06DC 0x6 0x0
+#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0                          0x0034 0x02A4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                     0x0034 0x02A4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                        0x0034 0x02A4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA00__KPP_ROW3                            0x0034 0x02A4 0x0620 0x3 0x0
+#define MX7D_PAD_EPDC_DATA00__EIM_AD0                             0x0034 0x02A4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0                           0x0034 0x02A4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_DATA0                           0x0034 0x02A4 0x0638 0x6 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_CLK                             0x0034 0x02A4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1                          0x0038 0x02A8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK                      0x0038 0x02A8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1                        0x0038 0x02A8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA01__KPP_COL3                            0x0038 0x02A8 0x0600 0x3 0x0
+#define MX7D_PAD_EPDC_DATA01__EIM_AD1                             0x0038 0x02A8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1                           0x0038 0x02A8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_DATA1                           0x0038 0x02A8 0x063C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE                          0x0038 0x02A8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2                          0x003C 0x02AC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B                    0x003C 0x02AC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2                        0x003C 0x02AC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA02__KPP_ROW2                            0x003C 0x02AC 0x061C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA02__EIM_AD2                             0x003C 0x02AC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2                           0x003C 0x02AC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_DATA2                           0x003C 0x02AC 0x0640 0x6 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC                           0x003C 0x02AC 0x0698 0x7 0x0
+#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3                          0x0040 0x02B0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN                     0x0040 0x02B0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3                        0x0040 0x02B0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA03__KPP_COL2                            0x0040 0x02B0 0x05FC 0x3 0x0
+#define MX7D_PAD_EPDC_DATA03__EIM_AD3                             0x0040 0x02B0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3                           0x0040 0x02B0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_DATA3                           0x0040 0x02B0 0x0644 0x6 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC                           0x0040 0x02B0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4                          0x0044 0x02B4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD                       0x0044 0x02B4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS                          0x0044 0x02B4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA04__KPP_ROW1                            0x0044 0x02B4 0x0618 0x3 0x0
+#define MX7D_PAD_EPDC_DATA04__EIM_AD4                             0x0044 0x02B4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4                           0x0044 0x02B4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA04__LCD_DATA4                           0x0044 0x02B4 0x0648 0x6 0x0
+#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL                           0x0044 0x02B4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5                          0x0048 0x02B8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD                     0x0048 0x02B8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK                         0x0048 0x02B8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA05__KPP_COL1                            0x0048 0x02B8 0x05F8 0x3 0x0
+#define MX7D_PAD_EPDC_DATA05__EIM_AD5                             0x0048 0x02B8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5                           0x0048 0x02B8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA05__LCD_DATA5                           0x0048 0x02B8 0x064C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE                         0x0048 0x02B8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6                          0x004C 0x02BC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK                      0x004C 0x02BC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B                        0x004C 0x02BC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA06__KPP_ROW0                            0x004C 0x02BC 0x0614 0x3 0x0
+#define MX7D_PAD_EPDC_DATA06__EIM_AD6                             0x004C 0x02BC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6                           0x004C 0x02BC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA06__LCD_DATA6                           0x004C 0x02BC 0x0650 0x6 0x0
+#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B                           0x004C 0x02BC 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7                          0x0050 0x02C0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B                    0x0050 0x02C0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B                        0x0050 0x02C0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA07__KPP_COL0                            0x0050 0x02C0 0x05F4 0x3 0x0
+#define MX7D_PAD_EPDC_DATA07__EIM_AD7                             0x0050 0x02C0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7                           0x0050 0x02C0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA07__LCD_DATA7                           0x0050 0x02C0 0x0654 0x6 0x0
+#define MX7D_PAD_EPDC_DATA07__JTAG_DONE                           0x0050 0x02C0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8                          0x0054 0x02C4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD                     0x0054 0x02C4 0x06E4 0x1 0x0
+#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0                        0x0054 0x02C4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX                        0x0054 0x02C4 0x071C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX                        0x0054 0x02C4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__EIM_OE                              0x0054 0x02C4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8                           0x0054 0x02C4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_DATA8                           0x0054 0x02C4 0x0658 0x6 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_BUSY                            0x0054 0x02C4 0x0634 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK                          0x0054 0x02C4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9                          0x0058 0x02C8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK                      0x0058 0x02C8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1                        0x0058 0x02C8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX                        0x0058 0x02C8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX                        0x0058 0x02C8 0x071C 0x3 0x1
+#define MX7D_PAD_EPDC_DATA09__EIM_RW                              0x0058 0x02C8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9                           0x0058 0x02C8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA9                           0x0058 0x02C8 0x065C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA0                           0x0058 0x02C8 0x0638 0x7 0x1
+#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE                           0x0058 0x02C8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10                         0x005C 0x02CC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B                    0x005C 0x02CC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2                        0x005C 0x02CC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS                       0x005C 0x02CC 0x0718 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS                       0x005C 0x02CC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B                           0x005C 0x02CC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10                          0x005C 0x02CC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA10                          0x005C 0x02CC 0x0660 0x6 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA9                           0x005C 0x02CC 0x065C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE                           0x005C 0x02CC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11                         0x0060 0x02D0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN                     0x0060 0x02D0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3                        0x0060 0x02D0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS                       0x0060 0x02D0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS                       0x0060 0x02D0 0x0718 0x3 0x1
+#define MX7D_PAD_EPDC_DATA11__EIM_BCLK                            0x0060 0x02D0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11                          0x0060 0x02D0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA11                          0x0060 0x02D0 0x0664 0x6 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA1                           0x0060 0x02D0 0x063C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0                          0x0060 0x02D0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12                         0x0064 0x02D4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD                       0x0064 0x02D4 0x06E0 0x1 0x0
+#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS                          0x0064 0x02D4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX                        0x0064 0x02D4 0x0724 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX                        0x0064 0x02D4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B                           0x0064 0x02D4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12                          0x0064 0x02D4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA12                          0x0064 0x02D4 0x0668 0x6 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA21                          0x0064 0x02D4 0x068C 0x7 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK                          0x0064 0x02D4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13                         0x0068 0x02D8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD                     0x0068 0x02D8 0x06EC 0x1 0x0
+#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK                         0x0068 0x02D8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX                        0x0068 0x02D8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX                        0x0068 0x02D8 0x0724 0x3 0x1
+#define MX7D_PAD_EPDC_DATA13__EIM_WAIT                            0x0068 0x02D8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13                          0x0068 0x02D8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_DATA13                          0x0068 0x02D8 0x066C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_CS                              0x0068 0x02D8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE                           0x0068 0x02D8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14                         0x006C 0x02DC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK                      0x006C 0x02DC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B                        0x006C 0x02DC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS                       0x006C 0x02DC 0x0720 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS                       0x006C 0x02DC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0                           0x006C 0x02DC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14                          0x006C 0x02DC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA14                          0x006C 0x02DC 0x0670 0x6 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA22                          0x006C 0x02DC 0x0690 0x7 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP                           0x006C 0x02DC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15                         0x0070 0x02E0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B                    0x0070 0x02E0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B                        0x0070 0x02E0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS                       0x0070 0x02E0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS                       0x0070 0x02E0 0x0720 0x3 0x1
+#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B                           0x0070 0x02E0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15                          0x0070 0x02E0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_DATA15                          0x0070 0x02E0 0x0674 0x6 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN                          0x0070 0x02E0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM                        0x0070 0x02E0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK                           0x0074 0x02E4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN                      0x0074 0x02E4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0                      0x0074 0x02E4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4                             0x0074 0x02E4 0x0624 0x3 0x0
+#define MX7D_PAD_EPDC_SDCLK__EIM_AD10                             0x0074 0x02E4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16                           0x0074 0x02E4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_CLK                              0x0074 0x02E4 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20                           0x0074 0x02E4 0x0688 0x7 0x0
+#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE                             0x0078 0x02E8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD                         0x0078 0x02E8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1                       0x0078 0x02E8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDLE__KPP_COL4                              0x0078 0x02E8 0x0604 0x3 0x0
+#define MX7D_PAD_EPDC_SDLE__EIM_AD11                              0x0078 0x02E8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17                            0x0078 0x02E8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA16                            0x0078 0x02E8 0x0678 0x6 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA8                             0x0078 0x02E8 0x0658 0x7 0x1
+#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE                             0x007C 0x02EC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0                        0x007C 0x02EC 0x0584 0x1 0x0
+#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2                       0x007C 0x02EC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDOE__KPP_COL5                              0x007C 0x02EC 0x0608 0x3 0x1
+#define MX7D_PAD_EPDC_SDOE__EIM_AD12                              0x007C 0x02EC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18                            0x007C 0x02EC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA17                            0x007C 0x02EC 0x067C 0x6 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA23                            0x007C 0x02EC 0x0694 0x7 0x0
+#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR                           0x0080 0x02F0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1                       0x0080 0x02F0 0x0588 0x1 0x0
+#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3                      0x0080 0x02F0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5                             0x0080 0x02F0 0x0628 0x3 0x1
+#define MX7D_PAD_EPDC_SDSHR__EIM_AD13                             0x0080 0x02F0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19                           0x0080 0x02F0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18                           0x0080 0x02F0 0x0680 0x6 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10                           0x0080 0x02F0 0x0660 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0                           0x0084 0x02F4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2                       0x0084 0x02F4 0x058C 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL                   0x0084 0x02F4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE0__EIM_AD14                             0x0084 0x02F4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20                           0x0084 0x02F4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19                           0x0084 0x02F4 0x0684 0x6 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5                            0x0084 0x02F4 0x064C 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1                           0x0088 0x02F8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3                       0x0088 0x02F8 0x0590 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC                      0x0088 0x02F8 0x0578 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER                          0x0088 0x02F8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_SDCE1__EIM_AD15                             0x0088 0x02F8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21                           0x0088 0x02F8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20                           0x0088 0x02F8 0x0688 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4                            0x0088 0x02F8 0x0648 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2                           0x008C 0x02FC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN                      0x008C 0x02FC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0                      0x008C 0x02FC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE2__KPP_COL6                             0x008C 0x02FC 0x060C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16                           0x008C 0x02FC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22                           0x008C 0x02FC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21                           0x008C 0x02FC 0x068C 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3                            0x008C 0x02FC 0x0644 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3                           0x0090 0x0300 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD                        0x0090 0x0300 0x06E8 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1                      0x0090 0x0300 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6                             0x0090 0x0300 0x062C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17                           0x0090 0x0300 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23                           0x0090 0x0300 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22                           0x0090 0x0300 0x0690 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2                            0x0090 0x0300 0x0640 0x7 0x1
+#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK                           0x0094 0x0304 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0                       0x0094 0x0304 0x05AC 0x1 0x0
+#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2                      0x0094 0x0304 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDCLK__KPP_COL7                             0x0094 0x0304 0x0610 0x3 0x0
+#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18                           0x0094 0x0304 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24                           0x0094 0x0304 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23                           0x0094 0x0304 0x0694 0x6 0x1
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16                           0x0094 0x0304 0x0678 0x7 0x1
+#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE                             0x0098 0x0308 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1                        0x0098 0x0308 0x05B0 0x1 0x0
+#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3                       0x0098 0x0308 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDOE__KPP_ROW7                              0x0098 0x0308 0x0630 0x3 0x0
+#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19                            0x0098 0x0308 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25                            0x0098 0x0308 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN                            0x0098 0x0308 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_DATA18                            0x0098 0x0308 0x0680 0x7 0x1
+#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL                             0x009C 0x030C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2                        0x009C 0x030C 0x05B4 0x1 0x0
+#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL                    0x009C 0x030C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20                            0x009C 0x030C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26                            0x009C 0x030C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_RD_E                              0x009C 0x030C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_DATA19                            0x009C 0x030C 0x0684 0x7 0x1
+#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP                             0x00A0 0x0310 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3                        0x00A0 0x0310 0x05B8 0x1 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC                       0x00A0 0x0310 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER                           0x00A0 0x0310 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21                            0x00A0 0x0310 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27                            0x00A0 0x0310 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDSP__LCD_BUSY                              0x00A0 0x0310 0x0634 0x6 0x1
+#define MX7D_PAD_EPDC_GDSP__LCD_DATA17                            0x00A0 0x0310 0x067C 0x7 0x1
+#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0                             0x00A4 0x0314 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK                          0x00A4 0x0314 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2                     0x00A4 0x0314 0x0570 0x3 0x1
+#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22                            0x00A4 0x0314 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28                            0x00A4 0x0314 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_CS                                0x00A4 0x0314 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_DATA7                             0x00A4 0x0314 0x0654 0x7 0x1
+#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1                             0x00A8 0x0318 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN                           0x00A8 0x0318 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK                          0x00A8 0x0318 0x0578 0x2 0x1
+#define MX7D_PAD_EPDC_BDR1__EIM_AD8                               0x00A8 0x0318 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29                            0x00A8 0x0318 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE                            0x00A8 0x0318 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_DATA6                             0x00A8 0x0318 0x0650 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM                       0x00AC 0x031C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA                     0x00AC 0x031C 0x05CC 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS                          0x00AC 0x031C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9                            0x00AC 0x031C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30                         0x00AC 0x031C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC                          0x00AC 0x031C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11                         0x00AC 0x031C 0x0664 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                     0x00B0 0x0320 0x0580 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB                    0x00B0 0x0320 0x05D0 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL                         0x00B0 0x0320 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1                         0x00B0 0x0320 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31                        0x00B0 0x0320 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC                         0x00B0 0x0320 0x0698 0x6 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12                        0x00B0 0x0320 0x0668 0x7 0x1
+#define MX7D_PAD_LCD_CLK__LCD_CLK                                 0x00B4 0x0324 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_CLK__ECSPI4_MISO                             0x00B4 0x0324 0x0558 0x1 0x0
+#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN                    0x00B4 0x0324 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_CLK__CSI_DATA16                              0x00B4 0x0324 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DCE_RX                            0x00B4 0x0324 0x06FC 0x4 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DTE_TX                            0x00B4 0x0324 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_CLK__GPIO3_IO0                               0x00B4 0x0324 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE                           0x00B8 0x0328 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI                          0x00B8 0x0328 0x055C 0x1 0x0
+#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN                 0x00B8 0x0328 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_ENABLE__CSI_DATA17                           0x00B8 0x0328 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX                         0x00B8 0x0328 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX                         0x00B8 0x0328 0x06FC 0x4 0x1
+#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1                            0x00B8 0x0328 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC                             0x00BC 0x032C 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK                           0x00BC 0x032C 0x0554 0x1 0x0
+#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN                  0x00BC 0x032C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_HSYNC__CSI_DATA18                            0x00BC 0x032C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS                         0x00BC 0x032C 0x06F8 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS                         0x00BC 0x032C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2                             0x00BC 0x032C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC                             0x00C0 0x0330 0x0698 0x0 0x2
+#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0                            0x00C0 0x0330 0x0560 0x1 0x0
+#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN                  0x00C0 0x0330 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_VSYNC__CSI_DATA19                            0x00C0 0x0330 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS                         0x00C0 0x0330 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS                         0x00C0 0x0330 0x06F8 0x4 0x1
+#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3                             0x00C0 0x0330 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_RESET__LCD_RESET                             0x00C4 0x0334 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1                         0x00C4 0x0334 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI                   0x00C4 0x0334 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_RESET__CSI_FIELD                             0x00C4 0x0334 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_RESET__EIM_DTACK_B                           0x00C4 0x0334 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_RESET__GPIO3_IO4                             0x00C4 0x0334 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__LCD_DATA0                            0x00C8 0x0338 0x0638 0x0 0x2
+#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2                        0x00C8 0x0338 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA00__CSI_DATA20                           0x00C8 0x0338 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA00__EIM_DATA0                            0x00C8 0x0338 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA00__GPIO3_IO5                            0x00C8 0x0338 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0                        0x00C8 0x0338 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA01__LCD_DATA1                            0x00CC 0x033C 0x063C 0x0 0x2
+#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3                        0x00CC 0x033C 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA01__CSI_DATA21                           0x00CC 0x033C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA01__EIM_DATA1                            0x00CC 0x033C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA01__GPIO3_IO6                            0x00CC 0x033C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1                        0x00CC 0x033C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA02__LCD_DATA2                            0x00D0 0x0340 0x0640 0x0 0x2
+#define MX7D_PAD_LCD_DATA02__GPT1_CLK                             0x00D0 0x0340 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA02__CSI_DATA22                           0x00D0 0x0340 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA02__EIM_DATA2                            0x00D0 0x0340 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA02__GPIO3_IO7                            0x00D0 0x0340 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2                        0x00D0 0x0340 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA03__LCD_DATA3                            0x00D4 0x0344 0x0644 0x0 0x2
+#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1                        0x00D4 0x0344 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA03__CSI_DATA23                           0x00D4 0x0344 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA03__EIM_DATA3                            0x00D4 0x0344 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA03__GPIO3_IO8                            0x00D4 0x0344 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3                        0x00D4 0x0344 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA04__LCD_DATA4                            0x00D8 0x0348 0x0648 0x0 0x2
+#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2                        0x00D8 0x0348 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA04__CSI_VSYNC                            0x00D8 0x0348 0x0520 0x3 0x0
+#define MX7D_PAD_LCD_DATA04__EIM_DATA4                            0x00D8 0x0348 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA04__GPIO3_IO9                            0x00D8 0x0348 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4                        0x00D8 0x0348 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA05__LCD_DATA5                            0x00DC 0x034C 0x064C 0x0 0x2
+#define MX7D_PAD_LCD_DATA05__CSI_HSYNC                            0x00DC 0x034C 0x0518 0x3 0x0
+#define MX7D_PAD_LCD_DATA05__EIM_DATA5                            0x00DC 0x034C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA05__GPIO3_IO10                           0x00DC 0x034C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5                        0x00DC 0x034C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA06__LCD_DATA6                            0x00E0 0x0350 0x0650 0x0 0x2
+#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK                           0x00E0 0x0350 0x051C 0x3 0x0
+#define MX7D_PAD_LCD_DATA06__EIM_DATA6                            0x00E0 0x0350 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA06__GPIO3_IO11                           0x00E0 0x0350 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6                        0x00E0 0x0350 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA07__LCD_DATA7                            0x00E4 0x0354 0x0654 0x0 0x2
+#define MX7D_PAD_LCD_DATA07__CSI_MCLK                             0x00E4 0x0354 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA07__EIM_DATA7                            0x00E4 0x0354 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA07__GPIO3_IO12                           0x00E4 0x0354 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7                        0x00E4 0x0354 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA08__LCD_DATA8                            0x00E8 0x0358 0x0658 0x0 0x2
+#define MX7D_PAD_LCD_DATA08__CSI_DATA9                            0x00E8 0x0358 0x0514 0x3 0x0
+#define MX7D_PAD_LCD_DATA08__EIM_DATA8                            0x00E8 0x0358 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA08__GPIO3_IO13                           0x00E8 0x0358 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8                        0x00E8 0x0358 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA09__LCD_DATA9                            0x00EC 0x035C 0x065C 0x0 0x2
+#define MX7D_PAD_LCD_DATA09__CSI_DATA8                            0x00EC 0x035C 0x0510 0x3 0x0
+#define MX7D_PAD_LCD_DATA09__EIM_DATA9                            0x00EC 0x035C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA09__GPIO3_IO14                           0x00EC 0x035C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9                        0x00EC 0x035C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA10__LCD_DATA10                           0x00F0 0x0360 0x0660 0x0 0x2
+#define MX7D_PAD_LCD_DATA10__CSI_DATA7                            0x00F0 0x0360 0x050C 0x3 0x0
+#define MX7D_PAD_LCD_DATA10__EIM_DATA10                           0x00F0 0x0360 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA10__GPIO3_IO15                           0x00F0 0x0360 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10                       0x00F0 0x0360 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA11__LCD_DATA11                           0x00F4 0x0364 0x0664 0x0 0x2
+#define MX7D_PAD_LCD_DATA11__CSI_DATA6                            0x00F4 0x0364 0x0508 0x3 0x0
+#define MX7D_PAD_LCD_DATA11__EIM_DATA11                           0x00F4 0x0364 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA11__GPIO3_IO16                           0x00F4 0x0364 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11                       0x00F4 0x0364 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA12__LCD_DATA12                           0x00F8 0x0368 0x0668 0x0 0x2
+#define MX7D_PAD_LCD_DATA12__CSI_DATA5                            0x00F8 0x0368 0x0504 0x3 0x0
+#define MX7D_PAD_LCD_DATA12__EIM_DATA12                           0x00F8 0x0368 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA12__GPIO3_IO17                           0x00F8 0x0368 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12                       0x00F8 0x0368 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA13__LCD_DATA13                           0x00FC 0x036C 0x066C 0x0 0x1
+#define MX7D_PAD_LCD_DATA13__CSI_DATA4                            0x00FC 0x036C 0x0500 0x3 0x0
+#define MX7D_PAD_LCD_DATA13__EIM_DATA13                           0x00FC 0x036C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA13__GPIO3_IO18                           0x00FC 0x036C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13                       0x00FC 0x036C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA14__LCD_DATA14                           0x0100 0x0370 0x0670 0x0 0x1
+#define MX7D_PAD_LCD_DATA14__CSI_DATA3                            0x0100 0x0370 0x04FC 0x3 0x0
+#define MX7D_PAD_LCD_DATA14__EIM_DATA14                           0x0100 0x0370 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA14__GPIO3_IO19                           0x0100 0x0370 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14                       0x0100 0x0370 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA15__LCD_DATA15                           0x0104 0x0374 0x0674 0x0 0x1
+#define MX7D_PAD_LCD_DATA15__CSI_DATA2                            0x0104 0x0374 0x04F8 0x3 0x0
+#define MX7D_PAD_LCD_DATA15__EIM_DATA15                           0x0104 0x0374 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA15__GPIO3_IO20                           0x0104 0x0374 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15                       0x0104 0x0374 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA16__LCD_DATA16                           0x0108 0x0378 0x0678 0x0 0x2
+#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4                       0x0108 0x0378 0x0594 0x1 0x0
+#define MX7D_PAD_LCD_DATA16__CSI_DATA1                            0x0108 0x0378 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA16__EIM_CRE                              0x0108 0x0378 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA16__GPIO3_IO21                           0x0108 0x0378 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16                       0x0108 0x0378 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA17__LCD_DATA17                           0x010C 0x037C 0x067C 0x0 0x2
+#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5                       0x010C 0x037C 0x0598 0x1 0x0
+#define MX7D_PAD_LCD_DATA17__CSI_DATA0                            0x010C 0x037C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN                     0x010C 0x037C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA17__GPIO3_IO22                           0x010C 0x037C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17                       0x010C 0x037C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA18__LCD_DATA18                           0x0110 0x0380 0x0680 0x0 0x2
+#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6                       0x0110 0x0380 0x059C 0x1 0x0
+#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO                  0x0110 0x0380 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA18__CSI_DATA15                           0x0110 0x0380 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA18__EIM_CS2_B                            0x0110 0x0380 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA18__GPIO3_IO23                           0x0110 0x0380 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18                       0x0110 0x0380 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__EIM_CS3_B                            0x0114 0x0384 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA19__GPIO3_IO24                           0x0114 0x0384 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19                       0x0114 0x0384 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__LCD_DATA19                           0x0114 0x0384 0x0684 0x0 0x2
+#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7                       0x0114 0x0384 0x05A0 0x1 0x0
+#define MX7D_PAD_LCD_DATA19__CSI_DATA14                           0x0114 0x0384 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA20__EIM_ADDR23                           0x0118 0x0388 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA20__GPIO3_IO25                           0x0118 0x0388 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA20__I2C3_SCL                             0x0118 0x0388 0x05E4 0x6 0x1
+#define MX7D_PAD_LCD_DATA20__LCD_DATA20                           0x0118 0x0388 0x0688 0x0 0x2
+#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4                       0x0118 0x0388 0x05BC 0x1 0x0
+#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT                0x0118 0x0388 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA20__CSI_DATA13                           0x0118 0x0388 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__LCD_DATA21                           0x011C 0x038C 0x068C 0x0 0x2
+#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5                       0x011C 0x038C 0x05C0 0x1 0x0
+#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT                0x011C 0x038C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA21__CSI_DATA12                           0x011C 0x038C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__EIM_ADDR24                           0x011C 0x038C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA21__GPIO3_IO26                           0x011C 0x038C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA21__I2C3_SDA                             0x011C 0x038C 0x05E8 0x6 0x1
+#define MX7D_PAD_LCD_DATA22__LCD_DATA22                           0x0120 0x0390 0x0690 0x0 0x2
+#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6                       0x0120 0x0390 0x05C4 0x1 0x0
+#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT                0x0120 0x0390 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA22__CSI_DATA11                           0x0120 0x0390 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA22__EIM_ADDR25                           0x0120 0x0390 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA22__GPIO3_IO27                           0x0120 0x0390 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA22__I2C4_SCL                             0x0120 0x0390 0x05EC 0x6 0x1
+#define MX7D_PAD_LCD_DATA23__LCD_DATA23                           0x0124 0x0394 0x0694 0x0 0x2
+#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7                       0x0124 0x0394 0x05C8 0x1 0x0
+#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT                0x0124 0x0394 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA23__CSI_DATA10                           0x0124 0x0394 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA23__EIM_ADDR26                           0x0124 0x0394 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA23__GPIO3_IO28                           0x0124 0x0394 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA23__I2C4_SDA                             0x0124 0x0394 0x05F0 0x6 0x1
+#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x06F4 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                      0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL                          0x0128 0x0398 0x05D4 0x1 0x0
+#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY                    0x0128 0x0398 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1                        0x0128 0x0398 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN              0x0128 0x0398 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0                         0x0128 0x0398 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO                        0x0128 0x0398 0x0000 0x6 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX                      0x012C 0x039C 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX                      0x012C 0x039C 0x06F4 0x0 0x1
+#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA                          0x012C 0x039C 0x05D8 0x1 0x0
+#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK                         0x012C 0x039C 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2                        0x012C 0x039C 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT             0x012C 0x039C 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                         0x012C 0x039C 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC                         0x012C 0x039C 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x06FC 0x0 0x2
+#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                      0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL                          0x0130 0x03A0 0x05DC 0x1 0x0
+#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK                      0x0130 0x03A0 0x0000 0x2 0x0
+#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3                        0x0130 0x03A0 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN              0x0130 0x03A0 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                         0x0130 0x03A0 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                      0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x06FC 0x0 0x3
+#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA                          0x0134 0x03A4 0x05E0 0x1 0x0
+#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                     0x0134 0x03A4 0x06C8 0x2 0x0
+#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                        0x0134 0x03A4 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT             0x0134 0x03A4 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3                         0x0134 0x03A4 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC                         0x0134 0x03A4 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX                      0x0138 0x03A8 0x0704 0x0 0x2
+#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX                      0x0138 0x03A8 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC                       0x0138 0x03A8 0x072C 0x1 0x0
+#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC                      0x0138 0x03A8 0x06CC 0x2 0x0
+#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO                       0x0138 0x03A8 0x0528 0x3 0x0
+#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN              0x0138 0x03A8 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4                         0x0138 0x03A8 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL                          0x0138 0x03A8 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX                      0x013C 0x03AC 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX                      0x013C 0x03AC 0x0704 0x0 0x3
+#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR                      0x013C 0x03AC 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK                      0x013C 0x03AC 0x06D0 0x2 0x0
+#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI                       0x013C 0x03AC 0x052C 0x3 0x0
+#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT             0x013C 0x03AC 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                         0x013C 0x03AC 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL                          0x013C 0x03AC 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0700 0x0 0x2
+#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                       0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                         0x0140 0x03B0 0x0728 0x1 0x0
+#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0                       0x0140 0x03B0 0x0000 0x2 0x0
+#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK                         0x0140 0x03B0 0x0000 0x3 0x0
+#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN                0x0140 0x03B0 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6                           0x0140 0x03B0 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RTS_B__SD3_LCTL                            0x0140 0x03B0 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS                       0x0144 0x03B4 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS                       0x0144 0x03B4 0x0700 0x0 0x3
+#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR                        0x0144 0x03B4 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC                        0x0144 0x03B4 0x06D4 0x2 0x0
+#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0                          0x0144 0x03B4 0x0530 0x3 0x0
+#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT               0x0144 0x03B4 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7                           0x0144 0x03B4 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT                         0x0144 0x03B4 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SCL__I2C1_SCL                               0x0148 0x03B8 0x05D4 0x0 0x1
+#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS                          0x0148 0x03B8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS                          0x0148 0x03B8 0x0708 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX                            0x0148 0x03B8 0x04DC 0x2 0x1
+#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO                            0x0148 0x03B8 0x0548 0x3 0x0
+#define MX7D_PAD_I2C1_SCL__GPIO4_IO8                              0x0148 0x03B8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SCL__SD2_VSELECT                            0x0148 0x03B8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SDA__I2C1_SDA                               0x014C 0x03BC 0x05D8 0x0 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS                          0x014C 0x03BC 0x0708 0x1 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS                          0x014C 0x03BC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX                            0x014C 0x03BC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI                            0x014C 0x03BC 0x054C 0x3 0x0
+#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1                      0x014C 0x03BC 0x0564 0x4 0x1
+#define MX7D_PAD_I2C1_SDA__GPIO4_IO9                              0x014C 0x03BC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SDA__SD3_VSELECT                            0x014C 0x03BC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C2_SCL__I2C2_SCL                               0x0150 0x03C0 0x05DC 0x0 0x1
+#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX                           0x0150 0x03C0 0x070C 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX                           0x0150 0x03C0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B                           0x0150 0x03C0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK                            0x0150 0x03C0 0x0544 0x3 0x0
+#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2                      0x0150 0x03C0 0x0570 0x4 0x2
+#define MX7D_PAD_I2C2_SCL__GPIO4_IO10                             0x0150 0x03C0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SCL__SD3_CD_B                               0x0150 0x03C0 0x0738 0x6 0x1
+#define MX7D_PAD_I2C2_SDA__I2C2_SDA                               0x0154 0x03C4 0x05E0 0x0 0x1
+#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX                           0x0154 0x03C4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX                           0x0154 0x03C4 0x070C 0x1 0x1
+#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB                   0x0154 0x03C4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0                             0x0154 0x03C4 0x0550 0x3 0x0
+#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3                      0x0154 0x03C4 0x0000 0x4 0x0
+#define MX7D_PAD_I2C2_SDA__GPIO4_IO11                             0x0154 0x03C4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SDA__SD3_WP                                 0x0154 0x03C4 0x073C 0x6 0x1
+#define MX7D_PAD_I2C3_SCL__I2C3_SCL                               0x0158 0x03C8 0x05E4 0x0 0x2
+#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS                          0x0158 0x03C8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS                          0x0158 0x03C8 0x0710 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX                            0x0158 0x03C8 0x04E0 0x2 0x1
+#define MX7D_PAD_I2C3_SCL__CSI_VSYNC                              0x0158 0x03C8 0x0520 0x3 0x1
+#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0                        0x0158 0x03C8 0x06D8 0x4 0x1
+#define MX7D_PAD_I2C3_SCL__GPIO4_IO12                             0x0158 0x03C8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SCL__EPDC_BDR0                              0x0158 0x03C8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C3_SDA__I2C3_SDA                               0x015C 0x03CC 0x05E8 0x0 0x2
+#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS                          0x015C 0x03CC 0x0710 0x1 0x1
+#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS                          0x015C 0x03CC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX                            0x015C 0x03CC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C3_SDA__CSI_HSYNC                              0x015C 0x03CC 0x0518 0x3 0x1
+#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1                        0x015C 0x03CC 0x06DC 0x4 0x1
+#define MX7D_PAD_I2C3_SDA__GPIO4_IO13                             0x015C 0x03CC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SDA__EPDC_BDR1                              0x015C 0x03CC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SCL__I2C4_SCL                               0x0160 0x03D0 0x05EC 0x0 0x2
+#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX                           0x0160 0x03D0 0x0714 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX                           0x0160 0x03D0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B                           0x0160 0x03D0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK                             0x0160 0x03D0 0x051C 0x3 0x1
+#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID                            0x0160 0x03D0 0x0734 0x4 0x1
+#define MX7D_PAD_I2C4_SCL__GPIO4_IO14                             0x0160 0x03D0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0                             0x0160 0x03D0 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SDA__I2C4_SDA                               0x0164 0x03D4 0x05F0 0x0 0x2
+#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX                           0x0164 0x03D4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX                           0x0164 0x03D4 0x0714 0x1 0x1
+#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB                   0x0164 0x03D4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SDA__CSI_MCLK                               0x0164 0x03D4 0x0000 0x3 0x0
+#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID                            0x0164 0x03D4 0x0730 0x4 0x1
+#define MX7D_PAD_I2C4_SDA__GPIO4_IO15                             0x0164 0x03D4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1                             0x0164 0x03D4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK                         0x0168 0x03D8 0x0524 0x0 0x1
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX                        0x0168 0x03D8 0x071C 0x1 0x2
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX                        0x0168 0x03D8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4                           0x0168 0x03D8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2                           0x0168 0x03D8 0x04F8 0x3 0x1
+#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16                          0x0168 0x03D8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM                        0x0168 0x03D8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI                         0x016C 0x03DC 0x052C 0x0 0x1
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX                        0x016C 0x03DC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX                        0x016C 0x03DC 0x071C 0x1 0x3
+#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5                           0x016C 0x03DC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3                           0x016C 0x03DC 0x04FC 0x3 0x1
+#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17                          0x016C 0x03DC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT                       0x016C 0x03DC 0x0580 0x6 0x1
+#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO                         0x0170 0x03E0 0x0528 0x0 0x1
+#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS                       0x0170 0x03E0 0x0718 0x1 0x2
+#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS                       0x0170 0x03E0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6                           0x0170 0x03E0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4                           0x0170 0x03E0 0x0500 0x3 0x1
+#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18                          0x0170 0x03E0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ                        0x0170 0x03E0 0x057C 0x6 0x0
+#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0                           0x0174 0x03E4 0x0530 0x0 0x1
+#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS                        0x0174 0x03E4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS                        0x0174 0x03E4 0x0718 0x1 0x3
+#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7                            0x0174 0x03E4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5                            0x0174 0x03E4 0x0504 0x3 0x1
+#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19                           0x0174 0x03E4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3                       0x0174 0x03E4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK                         0x0178 0x03E8 0x0534 0x0 0x0
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX                        0x0178 0x03E8 0x0724 0x1 0x2
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX                        0x0178 0x03E8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4                           0x0178 0x03E8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6                           0x0178 0x03E8 0x0508 0x3 0x1
+#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13                          0x0178 0x03E8 0x066C 0x4 0x2
+#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20                          0x0178 0x03E8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0                      0x0178 0x03E8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI                         0x017C 0x03EC 0x053C 0x0 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX                        0x017C 0x03EC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX                        0x017C 0x03EC 0x0724 0x1 0x3
+#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5                           0x017C 0x03EC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7                           0x017C 0x03EC 0x050C 0x3 0x1
+#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14                          0x017C 0x03EC 0x0670 0x4 0x2
+#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21                          0x017C 0x03EC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1                      0x017C 0x03EC 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22                          0x0180 0x03F0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2                      0x0180 0x03F0 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO                         0x0180 0x03F0 0x0538 0x0 0x0
+#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS                       0x0180 0x03F0 0x0720 0x1 0x2
+#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS                       0x0180 0x03F0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6                           0x0180 0x03F0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8                           0x0180 0x03F0 0x0510 0x3 0x1
+#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15                          0x0180 0x03F0 0x0674 0x4 0x2
+#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0                           0x0184 0x03F4 0x0540 0x0 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS                        0x0184 0x03F4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS                        0x0184 0x03F4 0x0720 0x1 0x3
+#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7                            0x0184 0x03F4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9                            0x0184 0x03F4 0x0514 0x3 0x1
+#define MX7D_PAD_ECSPI2_SS0__LCD_RESET                            0x0184 0x03F4 0x0000 0x4 0x0
+#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23                           0x0184 0x03F4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE                        0x0184 0x03F4 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_CD_B__SD1_CD_B                               0x0188 0x03F8 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX                           0x0188 0x03F8 0x071C 0x2 0x4
+#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX                           0x0188 0x03F8 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO                            0x0188 0x03F8 0x0558 0x3 0x1
+#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0                         0x0188 0x03F8 0x0584 0x4 0x1
+#define MX7D_PAD_SD1_CD_B__GPIO5_IO0                              0x0188 0x03F8 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CD_B__CCM_CLKO1                              0x0188 0x03F8 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_WP__SD1_WP                                   0x018C 0x03FC 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_WP__UART6_DCE_TX                             0x018C 0x03FC 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_WP__UART6_DTE_RX                             0x018C 0x03FC 0x071C 0x2 0x5
+#define MX7D_PAD_SD1_WP__ECSPI4_MOSI                              0x018C 0x03FC 0x055C 0x3 0x1
+#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1                           0x018C 0x03FC 0x0588 0x4 0x1
+#define MX7D_PAD_SD1_WP__GPIO5_IO1                                0x018C 0x03FC 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_WP__CCM_CLKO2                                0x018C 0x03FC 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B                         0x0190 0x0400 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK                           0x0190 0x0400 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS                       0x0190 0x0400 0x0718 0x2 0x4
+#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS                       0x0190 0x0400 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK                         0x0190 0x0400 0x0554 0x3 0x1
+#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2                      0x0190 0x0400 0x058C 0x4 0x1
+#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2                           0x0190 0x0400 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CLK__SD1_CLK                                 0x0194 0x0404 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC                            0x0194 0x0404 0x06CC 0x1 0x1
+#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS                           0x0194 0x0404 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS                           0x0194 0x0404 0x0718 0x2 0x5
+#define MX7D_PAD_SD1_CLK__ECSPI4_SS0                              0x0194 0x0404 0x0560 0x3 0x1
+#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3                          0x0194 0x0404 0x0590 0x4 0x1
+#define MX7D_PAD_SD1_CLK__GPIO5_IO3                               0x0194 0x0404 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CMD__SD1_CMD                                 0x0198 0x0408 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK                            0x0198 0x0408 0x06C4 0x1 0x1
+#define MX7D_PAD_SD1_CMD__ECSPI4_SS1                              0x0198 0x0408 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0                          0x0198 0x0408 0x05AC 0x4 0x1
+#define MX7D_PAD_SD1_CMD__GPIO5_IO4                               0x0198 0x0408 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__SD1_DATA0                             0x019C 0x040C 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0                         0x019C 0x040C 0x06C8 0x1 0x1
+#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX                          0x019C 0x040C 0x0724 0x2 0x4
+#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX                          0x019C 0x040C 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2                            0x019C 0x040C 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1                        0x019C 0x040C 0x05B0 0x4 0x1
+#define MX7D_PAD_SD1_DATA0__GPIO5_IO5                             0x019C 0x040C 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1                          0x019C 0x040C 0x04E4 0x6 0x1
+#define MX7D_PAD_SD1_DATA1__SD1_DATA1                             0x01A0 0x0410 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK                          0x01A0 0x0410 0x06D0 0x1 0x1
+#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX                          0x01A0 0x0410 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX                          0x01A0 0x0410 0x0724 0x2 0x5
+#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3                            0x01A0 0x0410 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2                        0x01A0 0x0410 0x05B4 0x4 0x1
+#define MX7D_PAD_SD1_DATA1__GPIO5_IO6                             0x01A0 0x0410 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2                          0x01A0 0x0410 0x04E8 0x6 0x1
+#define MX7D_PAD_SD1_DATA2__SD1_DATA2                             0x01A4 0x0414 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC                          0x01A4 0x0414 0x06D4 0x1 0x1
+#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS                         0x01A4 0x0414 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS                         0x01A4 0x0414 0x0720 0x2 0x4
+#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY                            0x01A4 0x0414 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3                        0x01A4 0x0414 0x05B8 0x4 0x1
+#define MX7D_PAD_SD1_DATA2__GPIO5_IO7                             0x01A4 0x0414 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3                          0x01A4 0x0414 0x04EC 0x6 0x1
+#define MX7D_PAD_SD1_DATA3__SD1_DATA3                             0x01A8 0x0418 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0                         0x01A8 0x0418 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS                         0x01A8 0x0418 0x0720 0x2 0x5
+#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS                         0x01A8 0x0418 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1                            0x01A8 0x0418 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA                        0x01A8 0x0418 0x05A4 0x4 0x1
+#define MX7D_PAD_SD1_DATA3__GPIO5_IO8                             0x01A8 0x0418 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4                          0x01A8 0x0418 0x04F0 0x6 0x1
+#define MX7D_PAD_SD2_CD_B__SD2_CD_B                               0x01AC 0x041C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CD_B__ENET1_MDIO                             0x01AC 0x041C 0x0568 0x1 0x2
+#define MX7D_PAD_SD2_CD_B__ENET2_MDIO                             0x01AC 0x041C 0x0574 0x2 0x2
+#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2                             0x01AC 0x041C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB                         0x01AC 0x041C 0x05A8 0x4 0x1
+#define MX7D_PAD_SD2_CD_B__GPIO5_IO9                              0x01AC 0x041C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0                        0x01AC 0x041C 0x06D8 0x6 0x2
+#define MX7D_PAD_SD2_WP__SD2_WP                                   0x01B0 0x0420 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_WP__ENET1_MDC                                0x01B0 0x0420 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_WP__ENET2_MDC                                0x01B0 0x0420 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_WP__ECSPI3_SS3                               0x01B0 0x0420 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_WP__USB_OTG1_ID                              0x01B0 0x0420 0x0734 0x4 0x2
+#define MX7D_PAD_SD2_WP__GPIO5_IO10                               0x01B0 0x0420 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1                          0x01B0 0x0420 0x06DC 0x6 0x2
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B                         0x01B4 0x0424 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK                           0x01B4 0x0424 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET                           0x01B4 0x0424 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY                          0x01B4 0x0424 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID                         0x01B4 0x0424 0x0730 0x4 0x2
+#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11                          0x01B4 0x0424 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CLK__SD2_CLK                                 0x01B8 0x0428 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC                            0x01B8 0x0428 0x06B8 0x1 0x0
+#define MX7D_PAD_SD2_CLK__MQS_RIGHT                               0x01B8 0x0428 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CLK__GPT4_CLK                                0x01B8 0x0428 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CLK__GPIO5_IO12                              0x01B8 0x0428 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CMD__SD2_CMD                                 0x01BC 0x042C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK                            0x01BC 0x042C 0x06B0 0x1 0x0
+#define MX7D_PAD_SD2_CMD__MQS_LEFT                                0x01BC 0x042C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1                           0x01BC 0x042C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD                         0x01BC 0x042C 0x06EC 0x4 0x1
+#define MX7D_PAD_SD2_CMD__GPIO5_IO13                              0x01BC 0x042C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA0__SD2_DATA0                             0x01C0 0x0430 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0                         0x01C0 0x0430 0x06B4 0x1 0x0
+#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX                          0x01C0 0x0430 0x070C 0x2 0x2
+#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX                          0x01C0 0x0430 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2                         0x01C0 0x0430 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK                        0x01C0 0x0430 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA0__GPIO5_IO14                            0x01C0 0x0430 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA1__SD2_DATA1                             0x01C4 0x0434 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK                          0x01C4 0x0434 0x06BC 0x1 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX                          0x01C4 0x0434 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX                          0x01C4 0x0434 0x070C 0x2 0x3
+#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1                         0x01C4 0x0434 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B                      0x01C4 0x0434 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA1__GPIO5_IO15                            0x01C4 0x0434 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA2__SD2_DATA2                             0x01C8 0x0438 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC                          0x01C8 0x0438 0x06C0 0x1 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS                         0x01C8 0x0438 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS                         0x01C8 0x0438 0x0708 0x2 0x2
+#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2                         0x01C8 0x0438 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN                       0x01C8 0x0438 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA2__GPIO5_IO16                            0x01C8 0x0438 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA3__SD2_DATA3                             0x01CC 0x043C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0                         0x01CC 0x043C 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS                         0x01CC 0x043C 0x0708 0x2 0x3
+#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS                         0x01CC 0x043C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3                         0x01CC 0x043C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD                         0x01CC 0x043C 0x06E8 0x4 0x1
+#define MX7D_PAD_SD2_DATA3__GPIO5_IO17                            0x01CC 0x043C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CLK__SD3_CLK                                 0x01D0 0x0440 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CLK__NAND_CLE                                0x01D0 0x0440 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CLK__ECSPI4_MISO                             0x01D0 0x0440 0x0558 0x2 0x2
+#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC                            0x01D0 0x0440 0x06CC 0x3 0x2
+#define MX7D_PAD_SD3_CLK__GPT3_CLK                                0x01D0 0x0440 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CLK__GPIO6_IO0                               0x01D0 0x0440 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CMD__SD3_CMD                                 0x01D4 0x0444 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CMD__NAND_ALE                                0x01D4 0x0444 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI                             0x01D4 0x0444 0x055C 0x2 0x2
+#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK                            0x01D4 0x0444 0x06C4 0x3 0x2
+#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1                           0x01D4 0x0444 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CMD__GPIO6_IO1                               0x01D4 0x0444 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA0__SD3_DATA0                             0x01D8 0x0448 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA0__NAND_DATA00                           0x01D8 0x0448 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0                            0x01D8 0x0448 0x0560 0x2 0x2
+#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0                         0x01D8 0x0448 0x06C8 0x3 0x2
+#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2                         0x01D8 0x0448 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA0__GPIO6_IO2                             0x01D8 0x0448 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA1__SD3_DATA1                             0x01DC 0x044C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA1__NAND_DATA01                           0x01DC 0x044C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK                           0x01DC 0x044C 0x0554 0x2 0x2
+#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK                          0x01DC 0x044C 0x06D0 0x3 0x2
+#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1                         0x01DC 0x044C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA1__GPIO6_IO3                             0x01DC 0x044C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA2__SD3_DATA2                             0x01E0 0x0450 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA2__NAND_DATA02                           0x01E0 0x0450 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA2__I2C3_SDA                              0x01E0 0x0450 0x05E8 0x2 0x3
+#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC                          0x01E0 0x0450 0x06D4 0x3 0x2
+#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2                         0x01E0 0x0450 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA2__GPIO6_IO4                             0x01E0 0x0450 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA3__SD3_DATA3                             0x01E4 0x0454 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA3__NAND_DATA03                           0x01E4 0x0454 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA3__I2C3_SCL                              0x01E4 0x0454 0x05E4 0x2 0x3
+#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0                         0x01E4 0x0454 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3                         0x01E4 0x0454 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA3__GPIO6_IO5                             0x01E4 0x0454 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA4__SD3_DATA4                             0x01E8 0x0458 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA4__NAND_DATA04                           0x01E8 0x0458 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX                          0x01E8 0x0458 0x0704 0x3 0x4
+#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX                          0x01E8 0x0458 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX                           0x01E8 0x0458 0x04E0 0x4 0x2
+#define MX7D_PAD_SD3_DATA4__GPIO6_IO6                             0x01E8 0x0458 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA5__SD3_DATA5                             0x01EC 0x045C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA5__NAND_DATA05                           0x01EC 0x045C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX                          0x01EC 0x045C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX                          0x01EC 0x045C 0x0704 0x3 0x5
+#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX                           0x01EC 0x045C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA5__GPIO6_IO7                             0x01EC 0x045C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_DATA6                             0x01F0 0x0460 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA6__NAND_DATA06                           0x01F0 0x0460 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_WP                                0x01F0 0x0460 0x073C 0x2 0x2
+#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS                         0x01F0 0x0460 0x0700 0x3 0x4
+#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS                         0x01F0 0x0460 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX                           0x01F0 0x0460 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA6__GPIO6_IO8                             0x01F0 0x0460 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_DATA7                             0x01F4 0x0464 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA7__NAND_DATA07                           0x01F4 0x0464 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_CD_B                              0x01F4 0x0464 0x0738 0x2 0x2
+#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS                         0x01F4 0x0464 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS                         0x01F4 0x0464 0x0700 0x3 0x5
+#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX                           0x01F4 0x0464 0x04DC 0x4 0x2
+#define MX7D_PAD_SD3_DATA7__GPIO6_IO9                             0x01F4 0x0464 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_STROBE__SD3_STROBE                           0x01F8 0x0468 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_STROBE__NAND_RE_B                            0x01F8 0x0468 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_STROBE__GPIO6_IO10                           0x01F8 0x0468 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B                         0x01FC 0x046C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_RESET_B__NAND_WE_B                           0x01FC 0x046C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET                           0x01FC 0x046C 0x0000 0x2 0x0
+#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK                           0x01FC 0x046C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11                          0x01FC 0x046C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0                      0x0200 0x0470 0x06A0 0x0 0x0
+#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B                         0x0200 0x0470 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX                       0x0200 0x0470 0x0714 0x2 0x2
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX                       0x0200 0x0470 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX                        0x0200 0x0470 0x04DC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD                    0x0200 0x0470 0x06E4 0x4 0x1
+#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12                         0x0200 0x0470 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET                   0x0200 0x0470 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK                       0x0204 0x0474 0x06A8 0x0 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B                         0x0204 0x0474 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX                       0x0204 0x0474 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX                       0x0204 0x0474 0x0714 0x2 0x3
+#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX                        0x0204 0x0474 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK                     0x0204 0x0474 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13                         0x0204 0x0474 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET                    0x0204 0x0474 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC                       0x0208 0x0478 0x06AC 0x0 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS                           0x0208 0x0478 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS                      0x0208 0x0478 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS                      0x0208 0x0478 0x0710 0x2 0x2
+#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX                        0x0208 0x0478 0x04E0 0x3 0x3
+#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B                   0x0208 0x0478 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14                         0x0208 0x0478 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT                       0x0208 0x0478 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0                      0x020C 0x047C 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B                       0x020C 0x047C 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS                      0x020C 0x047C 0x0710 0x2 0x3
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS                      0x020C 0x047C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX                        0x020C 0x047C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN                    0x020C 0x047C 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15                         0x020C 0x047C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET                   0x020C 0x047C 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC                       0x0210 0x0480 0x06A4 0x0 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B                         0x0210 0x0480 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC                       0x0210 0x0480 0x06B8 0x2 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL                           0x0210 0x0480 0x05EC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD                      0x0210 0x0480 0x06E0 0x4 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16                         0x0210 0x0480 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT                          0x0210 0x0480 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0                   0x0210 0x0480 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK                       0x0214 0x0484 0x069C 0x0 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B                         0x0214 0x0484 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK                       0x0214 0x0484 0x06B0 0x2 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA                           0x0214 0x0484 0x05F0 0x3 0x3
+#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA                     0x0214 0x0484 0x05CC 0x4 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17                         0x0214 0x0484 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT                           0x0214 0x0484 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1                   0x0214 0x0484 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK                             0x0218 0x0488 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_MCLK__NAND_WP_B                             0x0218 0x0488 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK                             0x0218 0x0488 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY                        0x0218 0x0488 0x04F4 0x3 0x3
+#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB                        0x0218 0x0488 0x05D0 0x4 0x1
+#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18                            0x0218 0x0488 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK                        0x0218 0x0488 0x0000 0x7 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC                       0x021C 0x048C 0x06C0 0x0 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO                        0x021C 0x048C 0x0548 0x1 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX                       0x021C 0x048C 0x070C 0x2 0x4
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX                       0x021C 0x048C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS                      0x021C 0x048C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS                      0x021C 0x048C 0x06F0 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4                     0x021C 0x048C 0x05BC 0x4 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19                         0x021C 0x048C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK                       0x0220 0x0490 0x06BC 0x0 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI                        0x0220 0x0490 0x054C 0x1 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX                       0x0220 0x0490 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX                       0x0220 0x0490 0x070C 0x2 0x5
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS                      0x0220 0x0490 0x06F0 0x3 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS                      0x0220 0x0490 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5                     0x0220 0x0490 0x05C0 0x4 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20                         0x0220 0x0490 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0                      0x0224 0x0494 0x06B4 0x0 0x1
+#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK                        0x0224 0x0494 0x0544 0x1 0x1
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS                      0x0224 0x0494 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS                      0x0224 0x0494 0x0708 0x2 0x4
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS                      0x0224 0x0494 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS                      0x0224 0x0494 0x06F8 0x3 0x2
+#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6                     0x0224 0x0494 0x05C4 0x4 0x1
+#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21                         0x0224 0x0494 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7                           0x0224 0x0494 0x0610 0x6 0x1
+#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0                      0x0228 0x0498 0x0000 0x0 0x0
+#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0                         0x0228 0x0498 0x0550 0x1 0x1
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS                      0x0228 0x0498 0x0708 0x2 0x5
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS                      0x0228 0x0498 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS                      0x0228 0x0498 0x06F8 0x3 0x3
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS                      0x0228 0x0498 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7                     0x0228 0x0498 0x05C8 0x4 0x1
+#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22                         0x0228 0x0498 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7                           0x0228 0x0498 0x0630 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0                 0x022C 0x049C 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT                        0x022C 0x049C 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL                        0x022C 0x049C 0x05E4 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS                   0x022C 0x049C 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS                   0x022C 0x049C 0x06F0 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0                      0x022C 0x049C 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0                       0x022C 0x049C 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3                        0x022C 0x049C 0x0620 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1                 0x0230 0x04A0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT                        0x0230 0x04A0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA                        0x0230 0x04A0 0x05E8 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS                   0x0230 0x04A0 0x06F0 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS                   0x0230 0x04A0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1                      0x0230 0x04A0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1                       0x0230 0x04A0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3                        0x0230 0x04A0 0x0600 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2                 0x0234 0x04A4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX                     0x0234 0x04A4 0x04DC 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK                     0x0234 0x04A4 0x0534 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX                    0x0234 0x04A4 0x06F4 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX                    0x0234 0x04A4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4                      0x0234 0x04A4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2                       0x0234 0x04A4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2                        0x0234 0x04A4 0x061C 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3                 0x0238 0x04A8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX                     0x0238 0x04A8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI                     0x0238 0x04A8 0x053C 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX                    0x0238 0x04A8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX                    0x0238 0x04A8 0x06F4 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5                      0x0238 0x04A8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3                       0x0238 0x04A8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2                        0x0238 0x04A8 0x05FC 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL           0x023C 0x04AC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1                   0x023C 0x04AC 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6                   0x023C 0x04AC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4                    0x023C 0x04AC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1                     0x023C 0x04AC 0x0618 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC                 0x0240 0x04B0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER                     0x0240 0x04B0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2                      0x0240 0x04B0 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7                      0x0240 0x04B0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5                       0x0240 0x04B0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1                        0x0240 0x04B0 0x0000 0x6 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0                 0x0244 0x04B4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT                        0x0244 0x04B4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3                      0x0244 0x04B4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8                      0x0244 0x04B4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6                       0x0244 0x04B4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0                        0x0244 0x04B4 0x0614 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1                 0x0248 0x04B8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT                        0x0248 0x04B8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY                      0x0248 0x04B8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9                      0x0248 0x04B8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7                       0x0248 0x04B8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0                        0x0248 0x04B8 0x05F4 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2                 0x024C 0x04BC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX                     0x024C 0x04BC 0x04E0 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO                     0x024C 0x04BC 0x0538 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL                        0x024C 0x04BC 0x05EC 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED                      0x024C 0x04BC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8                       0x024C 0x04BC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3                 0x0250 0x04C0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX                     0x0250 0x04C0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0                      0x0250 0x04C0 0x0540 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA                        0x0250 0x04C0 0x05F0 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ                      0x0250 0x04C0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9                       0x0250 0x04C0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS                0x0250 0x04C0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL           0x0254 0x04C4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC                 0x0254 0x04C4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1                0x0254 0x04C4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2               0x0254 0x04C4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10                   0x0254 0x04C4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC                 0x0258 0x04C8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER                     0x0258 0x04C8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK                    0x0258 0x04C8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2                   0x0258 0x04C8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3                  0x0258 0x04C8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11                      0x0258 0x04C8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK                       0x025C 0x04CC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1                  0x025C 0x04CC 0x0564 0x1 0x2
+#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0                      0x025C 0x04CC 0x06A0 0x2 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3                      0x025C 0x04CC 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ                       0x025C 0x04CC 0x057C 0x4 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12                         0x025C 0x04CC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1                       0x025C 0x04CC 0x04E4 0x6 0x2
+#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0                     0x025C 0x04CC 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                       0x0260 0x04D0 0x056C 0x0 0x0
+#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B                       0x0260 0x04D0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK                       0x0260 0x04D0 0x06A8 0x2 0x1
+#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK                           0x0260 0x04D0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE                      0x0260 0x04D0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13                         0x0260 0x04D0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2                       0x0260 0x04D0 0x04E8 0x6 0x2
+#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1                     0x0260 0x04D0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_CRS__ENET1_CRS                             0x0264 0x04D4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB                  0x0264 0x04D4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC                          0x0264 0x04D4 0x06AC 0x2 0x1
+#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1                         0x0264 0x04D4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0                        0x0264 0x04D4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_CRS__GPIO7_IO14                            0x0264 0x04D4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3                          0x0264 0x04D4 0x04EC 0x6 0x2
+#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2                        0x0264 0x04D4 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_COL__ENET1_COL                             0x0268 0x04D8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY                        0x0268 0x04D8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0                         0x0268 0x04D8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2                         0x0268 0x04D8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1                        0x0268 0x04D8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_COL__GPIO7_IO15                            0x0268 0x04D8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4                          0x0268 0x04D8 0x04F0 0x6 0x2
+#define MX7D_PAD_ENET1_COL__CSU_INT_DEB                           0x0268 0x04D8 0x0000 0x7 0x0
+
+#endif /* __DTS_IMX7D_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi
new file mode 100644
index 000000000..585af6d21
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi1 {
+	flash0: mx25l51245g@0 {
+		compatible = "jedec,spi-nor";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7d-sdb-qspi.dts b/roms/u-boot/arch/arm/dts/imx7d-sdb-qspi.dts
new file mode 100644
index 000000000..9bb4c743c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-sdb-qspi.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+#include "imx7d-sdb.dts"
+
+/* disable epdc, conflict with qspi */
+&epdc {
+        status = "disabled";
+};
+
+&iomuxc {
+	qspi1 {
+		pinctrl_qspi1_1: qspi1grp_1 {
+			fsl,pins = <
+				MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x51
+				MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x51
+				MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x51
+				MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x51
+				MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x51
+				MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x51
+			>;
+		};
+	};
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_1>;
+	status = "okay";
+	ddrsmp=<0>;
+
+	flash0: mx25l51245g@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25l51245g";
+		spi-max-frequency = <29000000>;
+		/* take off one dummy cycle */
+		spi-nor,ddr-quad-read-dummy = <5>;
+		reg = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7d-sdb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx7d-sdb-u-boot.dtsi
new file mode 100644
index 000000000..b78358fa1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-sdb-u-boot.dtsi
@@ -0,0 +1,7 @@
+&fec2 {
+	status = "disable";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7d-sdb.dts b/roms/u-boot/arch/arm/dts/imx7d-sdb.dts
new file mode 100644
index 000000000..8191ac7c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-sdb.dts
@@ -0,0 +1,763 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017 NXP
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Freescale i.MX7 SabreSD Board";
+	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	spi4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		gpio-sck = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		extended_io: gpio-expander@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "brcm_reg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_fec2_3v3: regulator-fec2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tsc2046@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names ="default";
+		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 0>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <0>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <0>;
+		ti,pressure-max = /bits/ 16 <0>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_3v3>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	wakeup-source;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	fsl,tuning-step = <2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx7d-sdb {
+		pinctrl_brcm_reg: brcmreggrp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
+				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
+				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
+				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+			>;
+		};
+
+		pinctrl_enet2_reg: enet2reggrp {
+			fsl,pins = <
+				MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+				MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+			>;
+		};
+
+		pinctrl_flexcan2_reg: flexcan2reggrp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
+				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_lcdif: lcdifgrp {
+			fsl,pins = <
+				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+			>;
+		};
+
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
+				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
+				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
+			>;
+		};
+
+		pinctrl_tsc2046_pendown: tsc2046_pendown {
+			fsl,pins = <
+				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
+				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
+				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
+				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
+			>;
+		};
+
+		pinctrl_uart6: uart6grp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+			>;
+		};
+
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7d-smegw01.dts b/roms/u-boot/arch/arm/dts/imx7d-smegw01.dts
new file mode 100644
index 000000000..aefc654ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d-smegw01.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2020 PHYTEC Messtechnik GmbH
+// Author: Jens Lang  <J.Lang@phytec.de>
+// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
+
+/dts-v1/;
+#include "imx7d.dtsi"
+
+/ {
+	model = "Storopack SMEGW01 board";
+	compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	enable-sdio-wakeup;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	max-frequency = <200000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <1>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x5
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x5
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x5
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x5
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x5
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x5
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x5
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x5
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x5
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x5
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO		0x7
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC		0x7
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x74
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x7c
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1 {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3 {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5d
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1d
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5d
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5d
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5d
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5d
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5d
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5d
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5d
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5d
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1d
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5e
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1e
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5e
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5e
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5e
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5e
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5e
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5e
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5e
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5e
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5f
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0f
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5f
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5f
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5f
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5f
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5f
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5f
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5f
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5f
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1f
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7d.dtsi b/roms/u-boot/arch/arm/dts/imx7d.dtsi
new file mode 100644
index 000000000..75566c780
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7d.dtsi
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7s.dtsi"
+
+/ {
+	aliases {
+		ethernet1 = &fec2;
+	};
+	cpus {
+		cpu0: cpu@0 {
+			operating-points = <
+				/* KHz	uV */
+				996000	1075000
+				792000	975000
+			>;
+			clock-frequency = <996000000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <996000000>;
+		};
+	};
+
+	soc {
+		etm@3007d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007d000 0x1000>;
+
+			/*
+			 * System will hang if added nosmp in kernel command line
+			 * without arm,primecell-periphid because amba bus try to
+			 * read id and core1 power off at this time.
+			 */
+			arm,primecell-periphid = <0xbb956>;
+			cpu = <&cpu1>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port1>;
+				};
+			};
+		};
+	};
+};
+
+&aips2 {
+	epdc: epdc@306f0000 {
+		compatible = "fsl,imx7d-epdc";
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x306f0000 0x10000>;
+		clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_EPDC_PIXEL_ROOT_CLK>;
+		clock-names = "epdc_axi", "epdc_pix";
+		epdc-ram = <&gpr 0x4 30>;
+		status = "disabled";
+	};
+};
+
+&aips3 {
+	usbotg2: usb@30b20000 {
+		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+		reg = <0x30b20000 0x200>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_USB_CTRL_CLK>;
+		fsl,usbphy = <&usbphynop2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		phy-clkgate-delay-us = <400>;
+		status = "disabled";
+	};
+
+	usbmisc2: usbmisc@30b20200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x30b20200 0x200>;
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
+	};
+
+	fec2: ethernet@30bf0000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+		reg = <0x30bf0000 0x10000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "ptp",
+			"enet_clk_ref", "enet_out";
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		status = "disabled";
+	};
+};
+
+&ca_funnel_ports {
+	port@1 {
+		reg = <1>;
+		ca_funnel_in_port1: endpoint {
+			slave-mode;
+			remote-endpoint = <&etm1_out_port>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7s-warp-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx7s-warp-u-boot.dtsi
new file mode 100644
index 000000000..6319840b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7s-warp-u-boot.dtsi
@@ -0,0 +1,10 @@
+/ {
+    aliases {
+        mmc0 = &usdhc3;
+        usb0 = &usbotg1;
+    };
+
+    chosen {
+        stdout-path = &uart1;
+    };
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7s-warp.dts b/roms/u-boot/arch/arm/dts/imx7s-warp.dts
new file mode 100644
index 000000000..f7ba2c0a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7s-warp.dts
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 NXP Semiconductors.
+ * Author: Fabio Estevam <fabio.estevam@nxp.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7s.dtsi"
+
+/ {
+	model = "Warp i.MX7 Board";
+	compatible = "warp,imx7s-warp", "fsl,imx7s";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio>;
+		autorepeat;
+
+		back {
+			label = "Back";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_bt: regulator-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		enable-active-high;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		regulator-name = "bt_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&vgen4_reg>;
+		VDDIO-supply = <&vgen4_reg>;
+		VDDD-supply = <&vgen2_reg>;
+	};
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	no-1-8-v;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
+			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7s.dtsi b/roms/u-boot/arch/arm/dts/imx7s.dtsi
new file mode 100644
index 000000000..967023fde
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7s.dtsi
@@ -0,0 +1,1153 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/power/imx7-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; };
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		spi0 = &qspi1;
+		spi1 = &ecspi1;
+		spi2 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		ethernet0 = &fec1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <792000000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX7D_CLK_ARM>;
+		};
+	};
+
+	ckil: clock-cki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY1_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	usbphynop3: usbphynop3 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+				/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		funnel@30041000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30041000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ca_funnel_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					ca_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				/* funnel output port */
+				port@2 {
+					reg = <0>;
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
+			};
+		};
+
+		etm@3007c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007c000 0x1000>;
+			cpu = <&cpu0>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port0>;
+				};
+			};
+		};
+
+		funnel@30083000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30083000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					hugo_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hugo_funnel_in_port1: endpoint {
+						slave-mode; /* M4 input */
+					};
+				};
+
+				port@2 {
+					reg = <0>;
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
+			};
+		};
+
+		etf@30084000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30084000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_in_port: endpoint {
+						slave-mode;
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					etf_out_port: endpoint {
+						remote-endpoint = <&replicator_in_port0>;
+					};
+				};
+			};
+		};
+
+		etr@30086000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30086000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etr_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+
+		tpiu@30087000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x30087000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				tpiu_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
+		};
+
+		aips1: aips-bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30000000 0x400000>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 13 32>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 45 29>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 74 24>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 98 18>;
+			};
+
+			gpio6: gpio@30250000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30250000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 116 23>;
+			};
+
+			gpio7: gpio@30260000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 139 16>;
+			};
+
+			wdog1: wdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: wdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: wdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+				compatible = "fsl,imx7d-iomuxc-lpsr";
+				reg = <0x302c0000 0x10000>;
+				fsl,input-sel = <&iomuxc>;
+			};
+
+			gpt1: gpt@302d0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: gpt@302e0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt3: gpt@302f0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: gpt@30300000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x30300000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			kpp: kpp@30320000 {
+				compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_KPP_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@30330000 {
+				compatible = "fsl,imx7d-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx7d-iomuxc-gpr",
+					"fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx7d-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clks IMX7D_OCOTP_CLK>;
+
+				tempmon_calib: calib@3c {
+					reg = <0x3c 0x4>;
+				};
+
+				tempmon_temp_grade: temp-grade@10 {
+					reg = <0x10 0x4>;
+				};
+			};
+
+			tempmon: tempmon {
+				compatible = "fsl,imx7d-tempmon";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon =<&anatop>;
+				nvmem-cells = <&tempmon_calib>,
+					<&tempmon_temp_grade>;
+				nvmem-cell-names = "calib", "temp_grade";
+				clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+					"syscon", "simple-bus";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg_1p0d: regulator-vdd1p0d@30360210 {
+					reg = <0x30360210>;
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p0d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					anatop-reg-offset = <0x210>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <8>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <0>;
+				};
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			clks: ccm@30380000 {
+				compatible = "fsl,imx7d-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>;
+				clock-names = "ckil", "osc";
+			};
+
+			src: src@30390000 {
+				compatible = "fsl,imx7d-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx7d-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <3>;
+				interrupt-parent = <&intc>;
+				#power-domain-cells = <1>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_pcie_phy: pgc-power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <1>;
+						power-supply = <&reg_1p0d>;
+					};
+				};
+			};
+		};
+
+		aips2: aips-bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30400000 0x400000>;
+			ranges;
+
+			adc1: adc@30610000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30610000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			adc2: adc@30620000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30620000 0x10000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			ecspi4: ecspi@30630000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30630000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
+					<&clks IMX7D_ECSPI4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+					 <&clks IMX7D_PWM1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+					 <&clks IMX7D_PWM2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+					 <&clks IMX7D_PWM3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+					 <&clks IMX7D_PWM4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@30730000 {
+				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30730000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
+				clock-names = "pix", "axi";
+				status = "disabled";
+			};
+		};
+
+		aips3: aips-bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30800000 0x400000>;
+			ranges;
+
+			spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: ecspi@30820000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+						<&clks IMX7D_ECSPI1_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@30830000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+						<&clks IMX7D_ECSPI2_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@30840000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+						<&clks IMX7D_ECSPI3_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+						<&clks IMX7D_UART1_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+						<&clks IMX7D_UART2_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+						<&clks IMX7D_UART3_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@308a0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308a0000 0x10000>;
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+						 <&clks IMX7D_SAI1_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+					status = "disabled";
+				};
+
+				sai2: sai@308b0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308b0000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+						 <&clks IMX7D_SAI2_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+					status = "disabled";
+				};
+
+				sai3: sai@308c0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308c0000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+						 <&clks IMX7D_SAI3_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+					status = "disabled";
+				};
+			};
+
+			crypto: caam@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CAAM_CLK>,
+					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clock-names = "ipg", "aclk";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr1@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			flexcan1: can@30a00000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a00000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan2: can@30a10000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a10000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+					<&clks IMX7D_UART4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@30a70000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a70000 0x10000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+					<&clks IMX7D_UART5_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@30a80000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a80000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+					<&clks IMX7D_UART6_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart7: serial@30a90000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+					<&clks IMX7D_UART7_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			usbotg1: usb@30b10000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b10000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbh: usb@30b30000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b30000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop3>;
+				fsl,usbmisc = <&usbmisc3 0>;
+				phy_type = "hsic";
+				dr_mode = "host";
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@30b10200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b10200 0x200>;
+			};
+
+			usbmisc3: usbmisc@30b30200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b30200 0x200>;
+			};
+
+			usdhc1: usdhc@30b40000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC1_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@30b50000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC2_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@30b60000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC3_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			qspi1: qspi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-qspi";
+				reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
+					<&clks IMX7D_QSPI_ROOT_CLK>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			sdma: sdma@30bd0000 {
+				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SDMA_CORE_CLK>,
+					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupt-names = "int0", "int1", "int2", "pps";
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
+		};
+
+		dma_apbh: dma-apbh@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: gpmi-nand@33002000{
+			compatible = "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
+				<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+			assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7ulp-com.dts b/roms/u-boot/arch/arm/dts/imx7ulp-com.dts
new file mode 100644
index 000000000..c01e03dd0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7ulp-com.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2019 NXP
+// Author: Fabio Estevam <fabio.estevam@nxp.com>
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+
+/ {
+	model = "Embedded Artists i.MX7ULP COM";
+	compatible = "ea,imx7ulp-com", "fsl,imx7ulp";
+
+	chosen {
+		stdout-path = &lpuart4;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x8000000>;
+	};
+};
+
+&lpuart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <88>;
+};
+
+&usdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	pinctrl_hog_1: hoggrp-1 {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC1__PTC1		0x20000
+		>;
+	};
+
+	pinctrl_lpuart4: lpuart4grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
+			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x10042
+			IMX7ULP_PAD_PTD3__SDHC0_D7	0x43
+			IMX7ULP_PAD_PTD4__SDHC0_D6	0x43
+			IMX7ULP_PAD_PTD5__SDHC0_D5	0x43
+			IMX7ULP_PAD_PTD6__SDHC0_D4	0x43
+			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+			IMX7ULP_PAD_PTD11__SDHC0_DQS	0x42
+		>;
+	};
+
+	pinctrl_usbotg1_id: otg1idgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7ulp-evk.dts b/roms/u-boot/arch/arm/dts/imx7ulp-evk.dts
new file mode 100644
index 000000000..8f6a935e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7ulp-evk.dts
@@ -0,0 +1,401 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+
+/ {
+	model = "NXP i.MX7ULP EVK";
+	compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp", "Generic DT based system";
+
+	chosen {
+		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x402D0000,115200";
+		stdout-path = &lpuart4;
+	};
+
+	bcmdhd_wlan_0: bcmdhd_wlan@0 {
+		compatible = "android,bcmdhd_wlan";
+		wlreg_on-supply = <&wlreg_on>;
+		bcmdhd_fw = "/lib/firmware/bcm/1DX_BCM4343W/fw_bcmdhd.bin";
+		bcmdhd_nv = "/lib/firmware/bcm/1DX_BCM4343W/bcmdhd.1DX.SDIO.cal";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	mipi_dsi_reset: mipi-dsi-reset {
+		compatible = "gpio-reset";
+		reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+		#reset-cells = <0>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wlreg_on: fixedregulator@100 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-name = "wlreg_on";
+			gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <100>;
+			enable-active-high;
+		};
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_vsd_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+	};
+
+	pf1550-rpmsg {
+		compatible = "fsl,pf1550-rpmsg";
+		sw1_reg: SW1 {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1387500>;
+				regulator-boot-on;
+				regulator-always-on;
+		};
+
+		sw2_reg: SW2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1387500>;
+				regulator-boot-on;
+				regulator-always-on;
+		};
+
+		sw3_reg: SW3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+		};
+
+		vref_reg: VREFDDR {
+				regulator-name = "VREFDDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+		};
+
+		vldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+		};
+
+		vldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+		};
+
+		vldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+		};
+	};
+};
+
+&iomuxc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	imx7ulp-evk {
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				IMX7ULP_PAD_PTC1__PTC1		0x20000
+			>;
+		};
+
+		pinctrl_backlight: backlight_grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTF2__PTF2		0x20000
+			>;
+		};
+
+		pinctrl_lpi2c5: lpi2c5grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTC4__LPI2C5_SCL	0x27
+				IMX7ULP_PAD_PTC5__LPI2C5_SDA	0x27
+			>;
+		};
+
+		pinctrl_mipi_dsi_reset: mipi_dsi_reset_grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTC19__PTC19	0x20003
+			>;
+		};
+
+		pinctrl_lpuart4: lpuart4grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
+				IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
+			>;
+		};
+
+		pinctrl_lpuart6: lpuart6grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTE10__LPUART6_TX	0x3
+				IMX7ULP_PAD_PTE11__LPUART6_RX	0x3
+				IMX7ULP_PAD_PTE9__LPUART6_RTS_B	0x3
+				IMX7ULP_PAD_PTE8__LPUART6_CTS_B	0x3
+				IMX7ULP_PAD_PTE7__PTE7		0x20000	/* BT_REG_ON */
+			>;
+		};
+
+		pinctrl_lpuart7: lpuart7grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTF14__LPUART7_TX		0x3
+				IMX7ULP_PAD_PTF15__LPUART7_RX		0x3
+				IMX7ULP_PAD_PTF13__LPUART7_RTS_B	0x3
+				IMX7ULP_PAD_PTF12__LPUART7_CTS_B	0x3
+			>;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+				IMX7ULP_PAD_PTD2__SDHC0_CLK	0x10042
+				IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+				IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+				IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+				IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+				IMX7ULP_PAD_PTC10__PTC10	0x10000	/* USDHC0 CD */
+				IMX7ULP_PAD_PTD0__PTD0		0x20000	/* USDHC0 RST */
+			>;
+		};
+
+		pinctrl_usdhc0_8bit: usdhc0grp_8bit {
+			fsl,pins = <
+				IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+				IMX7ULP_PAD_PTD2__SDHC0_CLK	0x10042
+				IMX7ULP_PAD_PTD3__SDHC0_D7	0x43
+				IMX7ULP_PAD_PTD4__SDHC0_D6	0x43
+				IMX7ULP_PAD_PTD5__SDHC0_D5	0x43
+				IMX7ULP_PAD_PTD6__SDHC0_D4	0x43
+				IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+				IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+				IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+				IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+				IMX7ULP_PAD_PTD11__SDHC0_DQS	0x42
+			>;
+		};
+
+		pinctrl_lpi2c7: lpi2c7grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTF12__LPI2C7_SCL	0x27
+				IMX7ULP_PAD_PTF13__LPI2C7_SDA	0x27
+			>;
+		};
+
+		pinctrl_lpspi3: lpspi3grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTF16__LPSPI3_SIN	0x0
+				IMX7ULP_PAD_PTF17__LPSPI3_SOUT	0x0
+				IMX7ULP_PAD_PTF18__LPSPI3_SCK	0x0
+				IMX7ULP_PAD_PTF19__LPSPI3_PCS0	0x0
+			>;
+		};
+
+		pinctrl_usbotg1_vbus: otg1vbusgrp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTC0__PTC0		0x20000
+			>;
+		};
+
+		pinctrl_usbotg1_id: otg1idgrp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTE3__SDHC1_CMD	0x43
+				IMX7ULP_PAD_PTE2__SDHC1_CLK	0x10042
+				IMX7ULP_PAD_PTE1__SDHC1_D0	0x43
+				IMX7ULP_PAD_PTE0__SDHC1_D1	0x43
+				IMX7ULP_PAD_PTE5__SDHC1_D2	0x43
+				IMX7ULP_PAD_PTE4__SDHC1_D3	0x43
+			>;
+		};
+
+		pinctrl_usdhc1_rst: usdhc1grp_rst {
+			fsl,pins = <
+				IMX7ULP_PAD_PTE11__PTE11	0x20000	/* USDHC1 RST */
+				IMX7ULP_PAD_PTE13__PTE13	0x10003	/* USDHC1 CD */
+				IMX7ULP_PAD_PTE12__PTE12	0x10003	/* USDHC1 WP */
+				IMX7ULP_PAD_PTE14__SDHC1_VS	0x43	/* USDHC1 VSEL */
+			>;
+		};
+
+		pinctrl_dsi_hdmi: dsi_hdmi_grp {
+			fsl,pins = <
+				IMX7ULP_PAD_PTC18__PTC18	0x10003	/* DSI_HDMI_INT */
+			>;
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+	disp-dev = "mipi_dsi_northwest";
+	display = <&display0>;
+
+	display0: display@0 {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+			clock-frequency = <9200000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&lpi2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	status = "okay";
+};
+
+&lpspi3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&mipi_dsi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi_dsi_reset>;
+	lcd_panel = "TRULY-WVGA-TFT3P5581E";
+	resets = <&mipi_dsi_reset>;
+	status = "okay";
+};
+
+&lpuart4 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart4>;
+	status = "okay";
+};
+
+&lpuart6 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart6>;
+	status = "okay";
+};
+
+&lpuart7 { /* Uart test */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart7>;
+	status = "disabled";
+};
+
+&rpmsg{
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <88>;
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	cd-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	vqmmc-supply = <&vldo2_reg>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7ulp-pinfunc.h b/roms/u-boot/arch/arm/dts/imx7ulp-pinfunc.h
new file mode 100644
index 000000000..777d7f094
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7ulp-pinfunc.h
@@ -0,0 +1,892 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 - 2018 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX7ULP_PINFUNC_H
+#define __DTS_IMX7ULP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_conf_reg input_reg mux_mode input_val>
+ */
+#define IMX7ULP_PAD_PTA0__CMP0_IN1_3V                                0x0000 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA0__PTA0                                       0x0000 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA0__LPSPI0_PCS1                                0x0000 0x0104 0x3 0x2
+#define IMX7ULP_PAD_PTA0__LPUART0_CTS_B                              0x0000 0x01F8 0x4 0x2
+#define IMX7ULP_PAD_PTA0__LPI2C0_SCL                                 0x0000 0x017C 0x5 0x2
+#define IMX7ULP_PAD_PTA0__TPM0_CLKIN                                 0x0000 0x01A8 0x6 0x2
+#define IMX7ULP_PAD_PTA0__I2S0_RX_BCLK                               0x0000 0x01B8 0x7 0x2
+#define IMX7ULP_PAD_PTA0__LLWU0_P0                                   0x0000 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTA1__CMP0_IN2_3V                                0x0004 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA1__PTA1                                       0x0004 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA1__LPSPI0_PCS2                                0x0004 0x0108 0x3 0x1
+#define IMX7ULP_PAD_PTA1__LPUART0_RTS_B                              0x0004 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTA1__LPI2C0_SDA                                 0x0004 0x0180 0x5 0x1
+#define IMX7ULP_PAD_PTA1__TPM0_CH0                                   0x0004 0x0138 0x6 0x1
+#define IMX7ULP_PAD_PTA1__I2S0_RX_FS                                 0x0004 0x01BC 0x7 0x1
+#define IMX7ULP_PAD_PTA2__CMP1_IN2_3V                                0x0008 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA2__PTA2                                       0x0008 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA2__LPSPI0_PCS3                                0x0008 0x010C 0x3 0x1
+#define IMX7ULP_PAD_PTA2__LPUART0_TX                                 0x0008 0x0200 0x4 0x1
+#define IMX7ULP_PAD_PTA2__LPI2C0_HREQ                                0x0008 0x0178 0x5 0x1
+#define IMX7ULP_PAD_PTA2__TPM0_CH1                                   0x0008 0x013C 0x6 0x1
+#define IMX7ULP_PAD_PTA2__I2S0_RXD0                                  0x0008 0x01DC 0x7 0x1
+#define IMX7ULP_PAD_PTA3__CMP1_IN4_3V                                0x000C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA3__PTA3                                       0x000C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA3__LPSPI0_PCS0                                0x000C 0x0100 0x3 0x1
+#define IMX7ULP_PAD_PTA3__LPUART0_RX                                 0x000C 0x01FC 0x4 0x1
+#define IMX7ULP_PAD_PTA3__TPM0_CH2                                   0x000C 0x0140 0x6 0x1
+#define IMX7ULP_PAD_PTA3__I2S0_RXD1                                  0x000C 0x01E0 0x7 0x1
+#define IMX7ULP_PAD_PTA3__CMP0_OUT                                   0x000C 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTA3__LLWU0_P1                                   0x000C 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTA4__ADC1_CH3A                                  0x0010 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA4__PTA4                                       0x0010 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA4__LPSPI0_SIN                                 0x0010 0x0114 0x3 0x1
+#define IMX7ULP_PAD_PTA4__LPUART1_CTS_B                              0x0010 0x0204 0x4 0x1
+#define IMX7ULP_PAD_PTA4__LPI2C1_SCL                                 0x0010 0x0188 0x5 0x1
+#define IMX7ULP_PAD_PTA4__TPM0_CH3                                   0x0010 0x0144 0x6 0x1
+#define IMX7ULP_PAD_PTA4__I2S0_MCLK                                  0x0010 0x01B4 0x7 0x1
+#define IMX7ULP_PAD_PTA5__ADC1_CH3B                                  0x0014 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA5__PTA5                                       0x0014 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA5__LPSPI0_SOUT                                0x0014 0x0118 0x3 0x1
+#define IMX7ULP_PAD_PTA5__LPUART1_RTS_B                              0x0014 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTA5__LPI2C1_SDA                                 0x0014 0x018C 0x5 0x1
+#define IMX7ULP_PAD_PTA5__TPM0_CH4                                   0x0014 0x0148 0x6 0x1
+#define IMX7ULP_PAD_PTA5__I2S0_TX_BCLK                               0x0014 0x01C0 0x7 0x1
+#define IMX7ULP_PAD_PTA6__ADC1_CH4A                                  0x0018 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA6__PTA6                                       0x0018 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA6__LPSPI0_SCK                                 0x0018 0x0110 0x3 0x1
+#define IMX7ULP_PAD_PTA6__LPUART1_TX                                 0x0018 0x020C 0x4 0x1
+#define IMX7ULP_PAD_PTA6__LPI2C1_HREQ                                0x0018 0x0184 0x5 0x1
+#define IMX7ULP_PAD_PTA6__TPM0_CH5                                   0x0018 0x014C 0x6 0x1
+#define IMX7ULP_PAD_PTA6__I2S0_TX_FS                                 0x0018 0x01C4 0x7 0x1
+#define IMX7ULP_PAD_PTA7__ADC1_CH4B                                  0x001C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA7__PTA7                                       0x001C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA7__LPUART1_RX                                 0x001C 0x0208 0x4 0x1
+#define IMX7ULP_PAD_PTA7__TPM1_CH1                                   0x001C 0x0154 0x6 0x1
+#define IMX7ULP_PAD_PTA7__I2S0_TXD0                                  0x001C 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTA8__ADC1_CH5A                                  0x0020 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA8__PTA8                                       0x0020 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA8__LPSPI1_PCS1                                0x0020 0x0120 0x3 0x1
+#define IMX7ULP_PAD_PTA8__LPUART2_CTS_B                              0x0020 0x0210 0x4 0x1
+#define IMX7ULP_PAD_PTA8__LPI2C2_SCL                                 0x0020 0x0194 0x5 0x1
+#define IMX7ULP_PAD_PTA8__TPM1_CLKIN                                 0x0020 0x01AC 0x6 0x1
+#define IMX7ULP_PAD_PTA8__I2S0_TXD1                                  0x0020 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTA9__ADC1_CH5B                                  0x0024 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA9__PTA9                                       0x0024 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA9__LPSPI1_PCS2                                0x0024 0x0124 0x3 0x1
+#define IMX7ULP_PAD_PTA9__LPUART2_RTS_B                              0x0024 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTA9__LPI2C2_SDA                                 0x0024 0x0198 0x5 0x1
+#define IMX7ULP_PAD_PTA9__TPM1_CH0                                   0x0024 0x0150 0x6 0x1
+#define IMX7ULP_PAD_PTA9__NMI0_B                                     0x0024 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTA10__ADC1_CH6A                                 0x0028 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA10__PTA10                                     0x0028 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA10__LPSPI1_PCS3                               0x0028 0x0128 0x3 0x1
+#define IMX7ULP_PAD_PTA10__LPUART2_TX                                0x0028 0x0218 0x4 0x1
+#define IMX7ULP_PAD_PTA10__LPI2C2_HREQ                               0x0028 0x0190 0x5 0x1
+#define IMX7ULP_PAD_PTA10__TPM2_CLKIN                                0x0028 0x01F4 0x6 0x1
+#define IMX7ULP_PAD_PTA10__I2S0_RX_BCLK                              0x0028 0x01B8 0x7 0x1
+#define IMX7ULP_PAD_PTA11__ADC1_CH6B                                 0x002C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA11__PTA11                                     0x002C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA11__LPUART2_RX                                0x002C 0x0214 0x4 0x1
+#define IMX7ULP_PAD_PTA11__TPM2_CH0                                  0x002C 0x0158 0x6 0x1
+#define IMX7ULP_PAD_PTA11__I2S0_RX_FS                                0x002C 0x01BC 0x7 0x2
+#define IMX7ULP_PAD_PTA12__ADC1_CH7A                                 0x0030 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA12__PTA12                                     0x0030 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA12__LPSPI1_SIN                                0x0030 0x0130 0x3 0x1
+#define IMX7ULP_PAD_PTA12__LPUART3_CTS_B                             0x0030 0x021C 0x4 0x1
+#define IMX7ULP_PAD_PTA12__LPI2C3_SCL                                0x0030 0x01A0 0x5 0x1
+#define IMX7ULP_PAD_PTA12__TPM2_CH1                                  0x0030 0x015C 0x6 0x1
+#define IMX7ULP_PAD_PTA12__I2S0_RXD0                                 0x0030 0x01DC 0x7 0x2
+#define IMX7ULP_PAD_PTA13__ADC1_CH7B                                 0x0034 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA13__PTA13                                     0x0034 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA13__LPSPI1_SOUT                               0x0034 0x0134 0x3 0x2
+#define IMX7ULP_PAD_PTA13__LPUART3_RTS_B                             0x0034 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTA13__LPI2C3_SDA                                0x0034 0x01A4 0x5 0x2
+#define IMX7ULP_PAD_PTA13__TPM3_CLKIN                                0x0034 0x01B0 0x6 0x1
+#define IMX7ULP_PAD_PTA13__I2S0_RXD1                                 0x0034 0x01E0 0x7 0x2
+#define IMX7ULP_PAD_PTA13__CMP0_OUT                                  0x0034 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTA13__LLWU0_P2                                  0x0034 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTA14__ADC1_CH8A                                 0x0038 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA14__PTA14                                     0x0038 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA14__LPSPI1_SCK                                0x0038 0x012C 0x3 0x2
+#define IMX7ULP_PAD_PTA14__LPUART3_TX                                0x0038 0x0224 0x4 0x2
+#define IMX7ULP_PAD_PTA14__LPI2C3_HREQ                               0x0038 0x019C 0x5 0x2
+#define IMX7ULP_PAD_PTA14__TPM3_CH0                                  0x0038 0x0160 0x6 0x1
+#define IMX7ULP_PAD_PTA14__I2S0_MCLK                                 0x0038 0x01B4 0x7 0x2
+#define IMX7ULP_PAD_PTA14__LLWU0_P3                                  0x0038 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTA15__ADC1_CH8B                                 0x003C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA15__PTA15                                     0x003C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA15__LPSPI1_PCS0                               0x003C 0x011C 0x3 0x1
+#define IMX7ULP_PAD_PTA15__LPUART3_RX                                0x003C 0x0220 0x4 0x1
+#define IMX7ULP_PAD_PTA15__TPM3_CH1                                  0x003C 0x0164 0x6 0x1
+#define IMX7ULP_PAD_PTA15__I2S0_TX_BCLK                              0x003C 0x01C0 0x7 0x2
+#define IMX7ULP_PAD_PTA16__CMP1_IN5_3V                               0x0040 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA16__PTA16                                     0x0040 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA16__FXIO0_D0                                  0x0040 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA16__LPSPI0_SOUT                               0x0040 0x0118 0x3 0x2
+#define IMX7ULP_PAD_PTA16__LPUART0_CTS_B                             0x0040 0x01F8 0x4 0x1
+#define IMX7ULP_PAD_PTA16__LPI2C0_SCL                                0x0040 0x017C 0x5 0x1
+#define IMX7ULP_PAD_PTA16__TPM3_CH2                                  0x0040 0x0168 0x6 0x1
+#define IMX7ULP_PAD_PTA16__I2S0_TX_FS                                0x0040 0x01C4 0x7 0x2
+#define IMX7ULP_PAD_PTA17__CMP1_IN6_3V                               0x0044 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA17__PTA17                                     0x0044 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA17__FXIO0_D1                                  0x0044 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA17__LPSPI0_SCK                                0x0044 0x0110 0x3 0x2
+#define IMX7ULP_PAD_PTA17__LPUART0_RTS_B                             0x0044 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTA17__LPI2C0_SDA                                0x0044 0x0180 0x5 0x2
+#define IMX7ULP_PAD_PTA17__TPM3_CH3                                  0x0044 0x016C 0x6 0x1
+#define IMX7ULP_PAD_PTA17__I2S0_TXD0                                 0x0044 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTA18__CMP1_IN1_3V                               0x0048 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA18__PTA18                                     0x0048 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA18__FXIO0_D2                                  0x0048 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA18__LPSPI0_PCS0                               0x0048 0x0100 0x3 0x2
+#define IMX7ULP_PAD_PTA18__LPUART0_TX                                0x0048 0x0200 0x4 0x2
+#define IMX7ULP_PAD_PTA18__LPI2C0_HREQ                               0x0048 0x0178 0x5 0x2
+#define IMX7ULP_PAD_PTA18__TPM3_CH4                                  0x0048 0x0170 0x6 0x1
+#define IMX7ULP_PAD_PTA18__I2S0_TXD1                                 0x0048 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTA18__LLWU0_P4                                  0x0048 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTA19__CMP1_IN3_3V                               0x004C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA19__PTA19                                     0x004C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA19__FXIO0_D3                                  0x004C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA19__LPUART0_RX                                0x004C 0x01FC 0x4 0x2
+#define IMX7ULP_PAD_PTA19__TPM3_CH5                                  0x004C 0x0174 0x6 0x1
+#define IMX7ULP_PAD_PTA19__I2S1_RX_BCLK                              0x004C 0x01CC 0x7 0x1
+#define IMX7ULP_PAD_PTA19__LPTMR0_ALT3                               0x004C 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTA19__LLWU0_P5                                  0x004C 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTA20__ADC0_CH10A                                0x0050 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA20__PTA20                                     0x0050 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA20__FXIO0_D4                                  0x0050 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA20__LPSPI0_SIN                                0x0050 0x0114 0x3 0x2
+#define IMX7ULP_PAD_PTA20__LPUART1_CTS_B                             0x0050 0x0204 0x4 0x2
+#define IMX7ULP_PAD_PTA20__LPI2C1_SCL                                0x0050 0x0188 0x5 0x2
+#define IMX7ULP_PAD_PTA20__TPM0_CLKIN                                0x0050 0x01A8 0x6 0x1
+#define IMX7ULP_PAD_PTA20__I2S1_RX_FS                                0x0050 0x01D0 0x7 0x1
+#define IMX7ULP_PAD_PTA21__ADC0_CH10B                                0x0054 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA21__PTA21                                     0x0054 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA21__FXIO0_D5                                  0x0054 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA21__LPSPI0_PCS1                               0x0054 0x0104 0x3 0x1
+#define IMX7ULP_PAD_PTA21__LPUART1_RTS_B                             0x0054 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTA21__LPI2C1_SDA                                0x0054 0x018C 0x5 0x2
+#define IMX7ULP_PAD_PTA21__TPM0_CH0                                  0x0054 0x0138 0x6 0x2
+#define IMX7ULP_PAD_PTA21__I2S1_RXD0                                 0x0054 0x01E4 0x7 0x1
+#define IMX7ULP_PAD_PTA22__ADC0_CH9A                                 0x0058 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA22__PTA22                                     0x0058 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA22__FXIO0_D6                                  0x0058 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA22__LPSPI0_PCS2                               0x0058 0x0108 0x3 0x2
+#define IMX7ULP_PAD_PTA22__LPUART1_TX                                0x0058 0x020C 0x4 0x2
+#define IMX7ULP_PAD_PTA22__LPI2C1_HREQ                               0x0058 0x0184 0x5 0x2
+#define IMX7ULP_PAD_PTA22__TPM0_CH1                                  0x0058 0x013C 0x6 0x2
+#define IMX7ULP_PAD_PTA22__I2S1_RXD1                                 0x0058 0x01E8 0x7 0x1
+#define IMX7ULP_PAD_PTA22__LPTMR0_ALT2                               0x0058 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTA22__EWM_OUT_B                                 0x0058 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTA23__ADC0_CH9B                                 0x005C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA23__PTA23                                     0x005C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA23__FXIO0_D7                                  0x005C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA23__LPSPI0_PCS3                               0x005C 0x010C 0x3 0x2
+#define IMX7ULP_PAD_PTA23__LPUART1_RX                                0x005C 0x0208 0x4 0x2
+#define IMX7ULP_PAD_PTA23__TPM0_CH2                                  0x005C 0x0140 0x6 0x2
+#define IMX7ULP_PAD_PTA23__I2S1_MCLK                                 0x005C 0x01C8 0x7 0x1
+#define IMX7ULP_PAD_PTA23__LLWU0_P6                                  0x005C 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTA24__ADC0_CH8A                                 0x0060 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA24__PTA24                                     0x0060 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA24__FXIO0_D8                                  0x0060 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA24__LPSPI1_PCS1                               0x0060 0x0120 0x3 0x2
+#define IMX7ULP_PAD_PTA24__LPUART2_CTS_B                             0x0060 0x0210 0x4 0x2
+#define IMX7ULP_PAD_PTA24__LPI2C2_SCL                                0x0060 0x0194 0x5 0x2
+#define IMX7ULP_PAD_PTA24__TPM0_CH3                                  0x0060 0x0144 0x6 0x2
+#define IMX7ULP_PAD_PTA24__I2S1_TX_BCLK                              0x0060 0x01D4 0x7 0x1
+#define IMX7ULP_PAD_PTA25__ADC0_CH8B                                 0x0064 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA25__PTA25                                     0x0064 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA25__FXIO0_D9                                  0x0064 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA25__LPSPI1_PCS2                               0x0064 0x0124 0x3 0x2
+#define IMX7ULP_PAD_PTA25__LPUART2_RTS_B                             0x0064 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTA25__LPI2C2_SDA                                0x0064 0x0198 0x5 0x2
+#define IMX7ULP_PAD_PTA25__TPM0_CH4                                  0x0064 0x0148 0x6 0x2
+#define IMX7ULP_PAD_PTA25__I2S1_TX_FS                                0x0064 0x01D8 0x7 0x1
+#define IMX7ULP_PAD_PTA26__PTA26                                     0x0068 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA26__JTAG_TMS_SWD_DIO                          0x0068 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTA26__FXIO0_D10                                 0x0068 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA26__LPSPI1_PCS3                               0x0068 0x0128 0x3 0x2
+#define IMX7ULP_PAD_PTA26__LPUART2_TX                                0x0068 0x0218 0x4 0x2
+#define IMX7ULP_PAD_PTA26__LPI2C2_HREQ                               0x0068 0x0190 0x5 0x2
+#define IMX7ULP_PAD_PTA26__TPM0_CH5                                  0x0068 0x014C 0x6 0x2
+#define IMX7ULP_PAD_PTA26__I2S1_RXD2                                 0x0068 0x01EC 0x7 0x1
+#define IMX7ULP_PAD_PTA27__PTA27                                     0x006C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA27__JTAG_TDO                                  0x006C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTA27__FXIO0_D11                                 0x006C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA27__LPUART2_RX                                0x006C 0x0214 0x4 0x2
+#define IMX7ULP_PAD_PTA27__TPM1_CH1                                  0x006C 0x0154 0x6 0x2
+#define IMX7ULP_PAD_PTA27__I2S1_RXD3                                 0x006C 0x01F0 0x7 0x1
+#define IMX7ULP_PAD_PTA28__PTA28                                     0x0070 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA28__JTAG_TDI                                  0x0070 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTA28__FXIO0_D12                                 0x0070 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA28__LPSPI1_SIN                                0x0070 0x0130 0x3 0x2
+#define IMX7ULP_PAD_PTA28__LPUART3_CTS_B                             0x0070 0x021C 0x4 0x2
+#define IMX7ULP_PAD_PTA28__LPI2C3_SCL                                0x0070 0x01A0 0x5 0x2
+#define IMX7ULP_PAD_PTA28__TPM1_CLKIN                                0x0070 0x01AC 0x6 0x2
+#define IMX7ULP_PAD_PTA28__I2S1_TXD2                                 0x0070 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTA29__PTA29                                     0x0074 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA29__JTAG_TCLK_SWD_CLK                         0x0074 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTA29__FXIO0_D13                                 0x0074 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA29__LPSPI1_SOUT                               0x0074 0x0134 0x3 0x1
+#define IMX7ULP_PAD_PTA29__LPUART3_RTS_B                             0x0074 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTA29__LPI2C3_SDA                                0x0074 0x01A4 0x5 0x1
+#define IMX7ULP_PAD_PTA29__TPM1_CH0                                  0x0074 0x0150 0x6 0x2
+#define IMX7ULP_PAD_PTA29__I2S1_TXD3                                 0x0074 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTA30__ADC0_CH1A                                 0x0078 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA30__PTA30                                     0x0078 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA30__FXIO0_D14                                 0x0078 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA30__LPSPI1_SCK                                0x0078 0x012C 0x3 0x1
+#define IMX7ULP_PAD_PTA30__LPUART3_TX                                0x0078 0x0224 0x4 0x1
+#define IMX7ULP_PAD_PTA30__LPI2C3_HREQ                               0x0078 0x019C 0x5 0x1
+#define IMX7ULP_PAD_PTA30__TPM2_CLKIN                                0x0078 0x01F4 0x6 0x2
+#define IMX7ULP_PAD_PTA30__I2S1_TXD0                                 0x0078 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTA30__JTAG_TRST_B                               0x0078 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTA31__ADC0_CH1B                                 0x007C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTA31__PTA31                                     0x007C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTA31__FXIO0_D15                                 0x007C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTA31__LPSPI1_PCS0                               0x007C 0x011C 0x3 0x2
+#define IMX7ULP_PAD_PTA31__LPUART3_RX                                0x007C 0x0220 0x4 0x2
+#define IMX7ULP_PAD_PTA31__TPM2_CH0                                  0x007C 0x0158 0x6 0x2
+#define IMX7ULP_PAD_PTA31__I2S1_TXD1                                 0x007C 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTA31__LPTMR0_ALT1                               0x007C 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTA31__EWM_IN                                    0x007C 0x0228 0xc 0x1
+#define IMX7ULP_PAD_PTA31__LLWU0_P7                                  0x007C 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTB0__ADC0_CH0A                                  0x0080 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB0__PTB0                                       0x0080 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB0__FXIO0_D16                                  0x0080 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB0__LPSPI0_SIN                                 0x0080 0x0114 0x3 0x3
+#define IMX7ULP_PAD_PTB0__LPUART0_TX                                 0x0080 0x0200 0x4 0x3
+#define IMX7ULP_PAD_PTB0__TPM2_CH1                                   0x0080 0x015C 0x6 0x2
+#define IMX7ULP_PAD_PTB0__CLKOUT0                                    0x0080 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTB0__CMP1_OUT                                   0x0080 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB0__EWM_OUT_B                                  0x0080 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTB1__ADC0_CH0B                                  0x0084 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB1__PTB1                                       0x0084 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB1__FXIO0_D17                                  0x0084 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB1__LPSPI0_SOUT                                0x0084 0x0118 0x3 0x3
+#define IMX7ULP_PAD_PTB1__LPUART0_RX                                 0x0084 0x01FC 0x4 0x3
+#define IMX7ULP_PAD_PTB1__TPM3_CLKIN                                 0x0084 0x01B0 0x6 0x3
+#define IMX7ULP_PAD_PTB1__I2S1_TX_BCLK                               0x0084 0x01D4 0x7 0x2
+#define IMX7ULP_PAD_PTB1__RTC_CLKOUT                                 0x0084 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB1__EWM_IN                                     0x0084 0x0228 0xc 0x2
+#define IMX7ULP_PAD_PTB1__LLWU0_P8                                   0x0084 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTB2__ADC0_CH6A                                  0x0088 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB2__PTB2                                       0x0088 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB2__FXIO0_D18                                  0x0088 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB2__LPSPI0_SCK                                 0x0088 0x0110 0x3 0x3
+#define IMX7ULP_PAD_PTB2__LPUART1_TX                                 0x0088 0x020C 0x4 0x3
+#define IMX7ULP_PAD_PTB2__TPM3_CH0                                   0x0088 0x0160 0x6 0x2
+#define IMX7ULP_PAD_PTB2__I2S1_TX_FS                                 0x0088 0x01D8 0x7 0x2
+#define IMX7ULP_PAD_PTB2__TRACE_CLKOUT                               0x0088 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB3__ADC0_CH6B                                  0x008C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB3__PTB3                                       0x008C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB3__FXIO0_D19                                  0x008C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB3__LPSPI0_PCS0                                0x008C 0x0100 0x3 0x3
+#define IMX7ULP_PAD_PTB3__LPUART1_RX                                 0x008C 0x0208 0x4 0x3
+#define IMX7ULP_PAD_PTB3__TPM3_CH1                                   0x008C 0x0164 0x6 0x2
+#define IMX7ULP_PAD_PTB3__I2S1_TXD0                                  0x008C 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTB3__TRACE_D0                                   0x008C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB3__LPTMR1_ALT2                                0x008C 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB3__LLWU0_P9                                   0x008C 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTB4__PTB4                                       0x0090 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB4__FXIO0_D20                                  0x0090 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB4__LPSPI0_PCS1                                0x0090 0x0104 0x3 0x3
+#define IMX7ULP_PAD_PTB4__LPUART2_TX                                 0x0090 0x0218 0x4 0x3
+#define IMX7ULP_PAD_PTB4__LPI2C0_HREQ                                0x0090 0x0178 0x5 0x3
+#define IMX7ULP_PAD_PTB4__TPM3_CH2                                   0x0090 0x0168 0x6 0x2
+#define IMX7ULP_PAD_PTB4__I2S1_TXD1                                  0x0090 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTB4__QSPIA_DATA7                                0x0090 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB4__TRACE_D1                                   0x0090 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB4__SEC_VIO_B                                  0x0090 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB5__PTB5                                       0x0094 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB5__FXIO0_D21                                  0x0094 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB5__LPSPI0_PCS2                                0x0094 0x0108 0x3 0x3
+#define IMX7ULP_PAD_PTB5__LPUART2_RX                                 0x0094 0x0214 0x4 0x3
+#define IMX7ULP_PAD_PTB5__LPI2C1_HREQ                                0x0094 0x0184 0x5 0x3
+#define IMX7ULP_PAD_PTB5__TPM3_CH3                                   0x0094 0x016C 0x6 0x2
+#define IMX7ULP_PAD_PTB5__I2S1_TXD2                                  0x0094 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTB5__QSPIA_DATA6                                0x0094 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB5__TRACE_D2                                   0x0094 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB5__RTC_CLKOUT                                 0x0094 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB6__ADC1_CH1A                                  0x0098 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB6__PTB6                                       0x0098 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB6__FXIO0_D22                                  0x0098 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB6__LPSPI0_PCS3                                0x0098 0x010C 0x3 0x3
+#define IMX7ULP_PAD_PTB6__LPUART3_TX                                 0x0098 0x0224 0x4 0x3
+#define IMX7ULP_PAD_PTB6__LPI2C0_SCL                                 0x0098 0x017C 0x5 0x3
+#define IMX7ULP_PAD_PTB6__TPM3_CH4                                   0x0098 0x0170 0x6 0x2
+#define IMX7ULP_PAD_PTB6__I2S1_TXD3                                  0x0098 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTB6__QSPIA_DATA5                                0x0098 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB6__TRACE_D3                                   0x0098 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB6__LPTMR1_ALT3                                0x0098 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB6__LLWU0_P10                                  0x0098 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTB7__ADC1_CH1B                                  0x009C 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB7__PTB7                                       0x009C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB7__FXIO0_D23                                  0x009C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB7__LPSPI1_SIN                                 0x009C 0x0130 0x3 0x3
+#define IMX7ULP_PAD_PTB7__LPUART3_RX                                 0x009C 0x0220 0x4 0x3
+#define IMX7ULP_PAD_PTB7__LPI2C0_SDA                                 0x009C 0x0180 0x5 0x3
+#define IMX7ULP_PAD_PTB7__TPM3_CH5                                   0x009C 0x0174 0x6 0x2
+#define IMX7ULP_PAD_PTB7__I2S1_MCLK                                  0x009C 0x01C8 0x7 0x2
+#define IMX7ULP_PAD_PTB7__QSPIA_SS1_B                                0x009C 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB7__CMP1_OUT                                   0x009C 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB7__LLWU0_P11                                  0x009C 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTB8__ADC0_CH14A_CMP0_IN0                        0x00A0 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB8__PTB8                                       0x00A0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB8__FXIO0_D24                                  0x00A0 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB8__LPSPI1_SOUT                                0x00A0 0x0134 0x3 0x3
+#define IMX7ULP_PAD_PTB8__LPI2C1_SCL                                 0x00A0 0x0188 0x5 0x3
+#define IMX7ULP_PAD_PTB8__TPM0_CLKIN                                 0x00A0 0x01A8 0x6 0x3
+#define IMX7ULP_PAD_PTB8__I2S1_RX_BCLK                               0x00A0 0x01CC 0x7 0x2
+#define IMX7ULP_PAD_PTB8__QSPIA_SS0_B                                0x00A0 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB8__RTC_CLKOUT                                 0x00A0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB9__ADC0_CH14B_CMP0_IN2                        0x00A4 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB9__PTB9                                       0x00A4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB9__FXIO0_D25                                  0x00A4 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB9__LPSPI1_SCK                                 0x00A4 0x012C 0x3 0x3
+#define IMX7ULP_PAD_PTB9__LPI2C1_SDA                                 0x00A4 0x018C 0x5 0x3
+#define IMX7ULP_PAD_PTB9__TPM0_CH0                                   0x00A4 0x0138 0x6 0x3
+#define IMX7ULP_PAD_PTB9__I2S1_RX_FS                                 0x00A4 0x01D0 0x7 0x2
+#define IMX7ULP_PAD_PTB9__QSPIA_DQS                                  0x00A4 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB9__LLWU0_P12                                  0x00A4 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTB10__CMP0_IN1                                  0x00A8 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB10__PTB10                                     0x00A8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB10__FXIO0_D26                                 0x00A8 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB10__LPSPI1_PCS0                               0x00A8 0x011C 0x3 0x3
+#define IMX7ULP_PAD_PTB10__LPI2C2_SCL                                0x00A8 0x0194 0x5 0x3
+#define IMX7ULP_PAD_PTB10__TPM0_CH1                                  0x00A8 0x013C 0x6 0x3
+#define IMX7ULP_PAD_PTB10__I2S1_RXD0                                 0x00A8 0x01E4 0x7 0x2
+#define IMX7ULP_PAD_PTB10__TRACE_D4                                  0x00A8 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB11__CMP0_IN3                                  0x00AC 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB11__PTB11                                     0x00AC 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB11__FXIO0_D27                                 0x00AC 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB11__LPSPI1_PCS1                               0x00AC 0x0120 0x3 0x3
+#define IMX7ULP_PAD_PTB11__LPI2C2_SDA                                0x00AC 0x0198 0x5 0x3
+#define IMX7ULP_PAD_PTB11__TPM1_CLKIN                                0x00AC 0x01AC 0x6 0x3
+#define IMX7ULP_PAD_PTB11__I2S1_RXD1                                 0x00AC 0x01E8 0x7 0x2
+#define IMX7ULP_PAD_PTB11__TRACE_D5                                  0x00AC 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB12__ADC1_CH13A_CMP1_IN0                       0x00B0 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB12__PTB12                                     0x00B0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB12__FXIO0_D28                                 0x00B0 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB12__LPSPI1_PCS2                               0x00B0 0x0124 0x3 0x3
+#define IMX7ULP_PAD_PTB12__LPUART2_TX                                0x00B0 0x0218 0x4 0x4
+#define IMX7ULP_PAD_PTB12__LPI2C3_SCL                                0x00B0 0x01A0 0x5 0x3
+#define IMX7ULP_PAD_PTB12__TPM1_CH0                                  0x00B0 0x0150 0x6 0x3
+#define IMX7ULP_PAD_PTB12__I2S1_RXD2                                 0x00B0 0x01EC 0x7 0x2
+#define IMX7ULP_PAD_PTB12__TRACE_D6                                  0x00B0 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB13__ADC1_CH13B_CMP1_IN1                       0x00B4 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB13__PTB13                                     0x00B4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB13__FXIO0_D29                                 0x00B4 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB13__LPSPI1_PCS3                               0x00B4 0x0128 0x3 0x3
+#define IMX7ULP_PAD_PTB13__LPUART2_RX                                0x00B4 0x0214 0x4 0x4
+#define IMX7ULP_PAD_PTB13__LPI2C3_SDA                                0x00B4 0x01A4 0x5 0x3
+#define IMX7ULP_PAD_PTB13__TPM1_CH1                                  0x00B4 0x0154 0x6 0x3
+#define IMX7ULP_PAD_PTB13__I2S1_RXD3                                 0x00B4 0x01F0 0x7 0x2
+#define IMX7ULP_PAD_PTB13__QSPIA_DATA4                               0x00B4 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB13__TRACE_D7                                  0x00B4 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTB14__ADC1_CH2A                                 0x00B8 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB14__PTB14                                     0x00B8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB14__FXIO0_D30                                 0x00B8 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB14__LPI2C2_HREQ                               0x00B8 0x0190 0x5 0x3
+#define IMX7ULP_PAD_PTB14__TPM2_CLKIN                                0x00B8 0x01F4 0x6 0x3
+#define IMX7ULP_PAD_PTB14__QSPIA_SS1_B                               0x00B8 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB14__QSPIA_SCLK_B                              0x00B8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTB14__RTC_CLKOUT                                0x00B8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTB14__LLWU0_P13                                 0x00B8 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTB15__ADC1_CH2B                                 0x00BC 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB15__PTB15                                     0x00BC 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB15__FXIO0_D31                                 0x00BC 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTB15__LPI2C3_HREQ                               0x00BC 0x019C 0x5 0x3
+#define IMX7ULP_PAD_PTB15__TPM2_CH0                                  0x00BC 0x0158 0x6 0x3
+#define IMX7ULP_PAD_PTB15__QSPIA_SCLK                                0x00BC 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB16__ADC0_CH4A                                 0x00C0 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB16__PTB16                                     0x00C0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB16__TPM2_CH1                                  0x00C0 0x015C 0x6 0x3
+#define IMX7ULP_PAD_PTB16__QSPIA_DATA3                               0x00C0 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB16__LLWU0_P14                                 0x00C0 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTB17__ADC0_CH4B                                 0x00C4 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB17__PTB17                                     0x00C4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB17__TPM3_CLKIN                                0x00C4 0x01B0 0x6 0x2
+#define IMX7ULP_PAD_PTB17__QSPIA_DATA2                               0x00C4 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB18__ADC0_CH5A                                 0x00C8 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB18__PTB18                                     0x00C8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB18__TPM3_CH0                                  0x00C8 0x0160 0x6 0x3
+#define IMX7ULP_PAD_PTB18__QSPIA_DATA1                               0x00C8 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB19__ADC0_CH5B                                 0x00CC 0x0000 0x0 0x0
+#define IMX7ULP_PAD_PTB19__PTB19                                     0x00CC 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTB19__TPM3_CH1                                  0x00CC 0x0164 0x6 0x3
+#define IMX7ULP_PAD_PTB19__QSPIA_DATA0                               0x00CC 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTB19__USB0_ID                                   0x00CC 0x0338 0xa 0x0
+#define IMX7ULP_PAD_PTB19__LLWU0_P15                                 0x00CC 0x0000 0xd 0x0
+#define IMX7ULP_PAD_PTC0__PTC0                                       0x0000 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC0__LPUART4_CTS_B                              0x0000 0x0244 0x4 0x1
+#define IMX7ULP_PAD_PTC0__LPI2C4_SCL                                 0x0000 0x0278 0x5 0x1
+#define IMX7ULP_PAD_PTC0__TPM4_CLKIN                                 0x0000 0x0298 0x6 0x1
+#define IMX7ULP_PAD_PTC0__FB_AD0                                     0x0000 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC0__TRACE_D15                                  0x0000 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC1__PTC1                                       0x0004 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC1__LPUART4_RTS_B                              0x0004 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC1__LPI2C4_SDA                                 0x0004 0x027C 0x5 0x1
+#define IMX7ULP_PAD_PTC1__TPM4_CH0                                   0x0004 0x0280 0x6 0x1
+#define IMX7ULP_PAD_PTC1__FB_AD1                                     0x0004 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC1__TRACE_D14                                  0x0004 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC2__PTC2                                       0x0008 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC2__LPUART4_TX                                 0x0008 0x024C 0x4 0x1
+#define IMX7ULP_PAD_PTC2__LPI2C4_HREQ                                0x0008 0x0274 0x5 0x1
+#define IMX7ULP_PAD_PTC2__TPM4_CH1                                   0x0008 0x0284 0x6 0x1
+#define IMX7ULP_PAD_PTC2__FB_AD2                                     0x0008 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC2__TRACE_D13                                  0x0008 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC3__PTC3                                       0x000C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC3__LPUART4_RX                                 0x000C 0x0248 0x4 0x1
+#define IMX7ULP_PAD_PTC3__TPM4_CH2                                   0x000C 0x0288 0x6 0x1
+#define IMX7ULP_PAD_PTC3__FB_AD3                                     0x000C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC3__TRACE_D12                                  0x000C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC4__PTC4                                       0x0010 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC4__FXIO1_D0                                   0x0010 0x0204 0x2 0x1
+#define IMX7ULP_PAD_PTC4__LPSPI2_PCS1                                0x0010 0x02A0 0x3 0x1
+#define IMX7ULP_PAD_PTC4__LPUART5_CTS_B                              0x0010 0x0250 0x4 0x1
+#define IMX7ULP_PAD_PTC4__LPI2C5_SCL                                 0x0010 0x02BC 0x5 0x1
+#define IMX7ULP_PAD_PTC4__TPM4_CH3                                   0x0010 0x028C 0x6 0x1
+#define IMX7ULP_PAD_PTC4__FB_AD4                                     0x0010 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC4__TRACE_D11                                  0x0010 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC5__PTC5                                       0x0014 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC5__FXIO1_D1                                   0x0014 0x0208 0x2 0x1
+#define IMX7ULP_PAD_PTC5__LPSPI2_PCS2                                0x0014 0x02A4 0x3 0x1
+#define IMX7ULP_PAD_PTC5__LPUART5_RTS_B                              0x0014 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC5__LPI2C5_SDA                                 0x0014 0x02C0 0x5 0x1
+#define IMX7ULP_PAD_PTC5__TPM4_CH4                                   0x0014 0x0290 0x6 0x1
+#define IMX7ULP_PAD_PTC5__FB_AD5                                     0x0014 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC5__TRACE_D10                                  0x0014 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC6__PTC6                                       0x0018 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC6__FXIO1_D2                                   0x0018 0x020C 0x2 0x1
+#define IMX7ULP_PAD_PTC6__LPSPI2_PCS3                                0x0018 0x02A8 0x3 0x1
+#define IMX7ULP_PAD_PTC6__LPUART5_TX                                 0x0018 0x0258 0x4 0x1
+#define IMX7ULP_PAD_PTC6__LPI2C5_HREQ                                0x0018 0x02B8 0x5 0x1
+#define IMX7ULP_PAD_PTC6__TPM4_CH5                                   0x0018 0x0294 0x6 0x1
+#define IMX7ULP_PAD_PTC6__FB_AD6                                     0x0018 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC6__TRACE_D9                                   0x0018 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC7__PTC7                                       0x001C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC7__FXIO1_D3                                   0x001C 0x0210 0x2 0x1
+#define IMX7ULP_PAD_PTC7__LPUART5_RX                                 0x001C 0x0254 0x4 0x1
+#define IMX7ULP_PAD_PTC7__TPM5_CH1                                   0x001C 0x02C8 0x6 0x1
+#define IMX7ULP_PAD_PTC7__FB_AD7                                     0x001C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC7__TRACE_D8                                   0x001C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC8__PTC8                                       0x0020 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC8__FXIO1_D4                                   0x0020 0x0214 0x2 0x1
+#define IMX7ULP_PAD_PTC8__LPSPI2_SIN                                 0x0020 0x02B0 0x3 0x1
+#define IMX7ULP_PAD_PTC8__LPUART6_CTS_B                              0x0020 0x025C 0x4 0x1
+#define IMX7ULP_PAD_PTC8__LPI2C6_SCL                                 0x0020 0x02FC 0x5 0x1
+#define IMX7ULP_PAD_PTC8__TPM5_CLKIN                                 0x0020 0x02CC 0x6 0x1
+#define IMX7ULP_PAD_PTC8__FB_AD8                                     0x0020 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC8__TRACE_D7                                   0x0020 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC9__PTC9                                       0x0024 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC9__FXIO1_D5                                   0x0024 0x0218 0x2 0x1
+#define IMX7ULP_PAD_PTC9__LPSPI2_SOUT                                0x0024 0x02B4 0x3 0x1
+#define IMX7ULP_PAD_PTC9__LPUART6_RTS_B                              0x0024 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC9__LPI2C6_SDA                                 0x0024 0x0300 0x5 0x1
+#define IMX7ULP_PAD_PTC9__TPM5_CH0                                   0x0024 0x02C4 0x6 0x1
+#define IMX7ULP_PAD_PTC9__FB_AD9                                     0x0024 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC9__TRACE_D6                                   0x0024 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC10__PTC10                                     0x0028 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC10__FXIO1_D6                                  0x0028 0x021C 0x2 0x1
+#define IMX7ULP_PAD_PTC10__LPSPI2_SCK                                0x0028 0x02AC 0x3 0x1
+#define IMX7ULP_PAD_PTC10__LPUART6_TX                                0x0028 0x0264 0x4 0x1
+#define IMX7ULP_PAD_PTC10__LPI2C6_HREQ                               0x0028 0x02F8 0x5 0x1
+#define IMX7ULP_PAD_PTC10__TPM7_CH3                                  0x0028 0x02E8 0x6 0x1
+#define IMX7ULP_PAD_PTC10__FB_AD10                                   0x0028 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC10__TRACE_D5                                  0x0028 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC11__PTC11                                     0x002C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC11__FXIO1_D7                                  0x002C 0x0220 0x2 0x1
+#define IMX7ULP_PAD_PTC11__LPSPI2_PCS0                               0x002C 0x029C 0x3 0x1
+#define IMX7ULP_PAD_PTC11__LPUART6_RX                                0x002C 0x0260 0x4 0x1
+#define IMX7ULP_PAD_PTC11__TPM7_CH4                                  0x002C 0x02EC 0x6 0x1
+#define IMX7ULP_PAD_PTC11__FB_AD11                                   0x002C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC11__TRACE_D4                                  0x002C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC12__PTC12                                     0x0030 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC12__FXIO1_D8                                  0x0030 0x0224 0x2 0x1
+#define IMX7ULP_PAD_PTC12__LPSPI3_PCS1                               0x0030 0x0314 0x3 0x1
+#define IMX7ULP_PAD_PTC12__LPUART7_CTS_B                             0x0030 0x0268 0x4 0x1
+#define IMX7ULP_PAD_PTC12__LPI2C7_SCL                                0x0030 0x0308 0x5 0x1
+#define IMX7ULP_PAD_PTC12__TPM7_CH5                                  0x0030 0x02F0 0x6 0x1
+#define IMX7ULP_PAD_PTC12__FB_AD12                                   0x0030 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC12__TRACE_D3                                  0x0030 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC13__PTC13                                     0x0034 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC13__FXIO1_D9                                  0x0034 0x0228 0x2 0x1
+#define IMX7ULP_PAD_PTC13__LPSPI3_PCS2                               0x0034 0x0318 0x3 0x1
+#define IMX7ULP_PAD_PTC13__LPUART7_RTS_B                             0x0034 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC13__LPI2C7_SDA                                0x0034 0x030C 0x5 0x1
+#define IMX7ULP_PAD_PTC13__TPM7_CLKIN                                0x0034 0x02F4 0x6 0x1
+#define IMX7ULP_PAD_PTC13__FB_AD13                                   0x0034 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__TRACE_D2                                  0x0034 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC13__USB0_ID                                   0x0034 0x0338 0xb 0x1
+#define IMX7ULP_PAD_PTC14__PTC14                                     0x0038 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC14__FXIO1_D10                                 0x0038 0x022C 0x2 0x1
+#define IMX7ULP_PAD_PTC14__LPSPI3_PCS3                               0x0038 0x031C 0x3 0x1
+#define IMX7ULP_PAD_PTC14__LPUART7_TX                                0x0038 0x0270 0x4 0x1
+#define IMX7ULP_PAD_PTC14__LPI2C7_HREQ                               0x0038 0x0304 0x5 0x1
+#define IMX7ULP_PAD_PTC14__TPM7_CH0                                  0x0038 0x02DC 0x6 0x1
+#define IMX7ULP_PAD_PTC14__FB_AD14                                   0x0038 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC14__TRACE_D1                                  0x0038 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC15__PTC15                                     0x003C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC15__FXIO1_D11                                 0x003C 0x0230 0x2 0x1
+#define IMX7ULP_PAD_PTC15__LPUART7_RX                                0x003C 0x026C 0x4 0x1
+#define IMX7ULP_PAD_PTC15__TPM7_CH1                                  0x003C 0x02E0 0x6 0x1
+#define IMX7ULP_PAD_PTC15__FB_AD15                                   0x003C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC15__TRACE_D0                                  0x003C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC16__PTC16                                     0x0040 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC16__FXIO1_D12                                 0x0040 0x0234 0x2 0x1
+#define IMX7ULP_PAD_PTC16__LPSPI3_SIN                                0x0040 0x0324 0x3 0x1
+#define IMX7ULP_PAD_PTC16__TPM7_CH2                                  0x0040 0x02E4 0x6 0x1
+#define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B                   0x0040 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__TRACE_CLKOUT                              0x0040 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC16__USB1_OC2                                  0x0040 0x0334 0xb 0x1
+#define IMX7ULP_PAD_PTC17__PTC17                                     0x0044 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC17__FXIO1_D13                                 0x0044 0x0238 0x2 0x1
+#define IMX7ULP_PAD_PTC17__LPSPI3_SOUT                               0x0044 0x0328 0x3 0x1
+#define IMX7ULP_PAD_PTC17__TPM6_CLKIN                                0x0044 0x02D8 0x6 0x1
+#define IMX7ULP_PAD_PTC17__FB_CS0_B                                  0x0044 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__PTC18                                     0x0048 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC18__FXIO1_D14                                 0x0048 0x023C 0x2 0x1
+#define IMX7ULP_PAD_PTC18__LPSPI3_SCK                                0x0048 0x0320 0x3 0x1
+#define IMX7ULP_PAD_PTC18__TPM6_CH0                                  0x0048 0x02D0 0x6 0x1
+#define IMX7ULP_PAD_PTC18__FB_OE_B                                   0x0048 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__USB0_ID                                   0x0048 0x0338 0xb 0x2
+#define IMX7ULP_PAD_PTC18__VIU_DE                                    0x0048 0x033C 0xc 0x1
+#define IMX7ULP_PAD_PTC19__PTC19                                     0x004C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC19__FXIO1_D15                                 0x004C 0x0240 0x2 0x1
+#define IMX7ULP_PAD_PTC19__LPSPI3_PCS0                               0x004C 0x0310 0x3 0x1
+#define IMX7ULP_PAD_PTC19__TPM6_CH1                                  0x004C 0x02D4 0x6 0x1
+#define IMX7ULP_PAD_PTC19__FB_A16                                    0x004C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC19__USB0_ID                                   0x004C 0x0338 0xa 0x3
+#define IMX7ULP_PAD_PTC19__USB1_PWR2                                 0x004C 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTC19__VIU_DE                                    0x004C 0x033C 0xc 0x3
+#define IMX7ULP_PAD_PTD0__PTD0                                       0x0080 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD0__SDHC0_RESET_B                              0x0080 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD1__PTD1                                       0x0084 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD1__SDHC0_CMD                                  0x0084 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD2__PTD2                                       0x0088 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD2__SDHC0_CLK                                  0x0088 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD3__PTD3                                       0x008C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD3__SDHC0_D7                                   0x008C 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD4__PTD4                                       0x0090 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD4__SDHC0_D6                                   0x0090 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD5__PTD5                                       0x0094 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD5__SDHC0_D5                                   0x0094 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD6__PTD6                                       0x0098 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD6__SDHC0_D4                                   0x0098 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD7__PTD7                                       0x009C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD7__SDHC0_D3                                   0x009C 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD8__PTD8                                       0x00A0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD8__TPM4_CLKIN                                 0x00A0 0x0298 0x6 0x2
+#define IMX7ULP_PAD_PTD8__SDHC0_D2                                   0x00A0 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD9__PTD9                                       0x00A4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD9__TPM4_CH0                                   0x00A4 0x0280 0x6 0x2
+#define IMX7ULP_PAD_PTD9__SDHC0_D1                                   0x00A4 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD10__PTD10                                     0x00A8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD10__TPM4_CH1                                  0x00A8 0x0284 0x6 0x2
+#define IMX7ULP_PAD_PTD10__SDHC0_D0                                  0x00A8 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD11__PTD11                                     0x00AC 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD11__TPM4_CH2                                  0x00AC 0x0288 0x6 0x2
+#define IMX7ULP_PAD_PTD11__SDHC0_DQS                                 0x00AC 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE0__PTE0                                       0x0100 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE0__FXIO1_D31                                  0x0100 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE0__LPSPI2_PCS1                                0x0100 0x02A0 0x3 0x2
+#define IMX7ULP_PAD_PTE0__LPUART4_CTS_B                              0x0100 0x0244 0x4 0x2
+#define IMX7ULP_PAD_PTE0__LPI2C4_SCL                                 0x0100 0x0278 0x5 0x2
+#define IMX7ULP_PAD_PTE0__SDHC1_D1                                   0x0100 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE0__FB_A25                                     0x0100 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE1__PTE1                                       0x0104 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE1__FXIO1_D30                                  0x0104 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE1__LPSPI2_PCS2                                0x0104 0x02A4 0x3 0x2
+#define IMX7ULP_PAD_PTE1__LPUART4_RTS_B                              0x0104 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE1__LPI2C4_SDA                                 0x0104 0x027C 0x5 0x2
+#define IMX7ULP_PAD_PTE1__SDHC1_D0                                   0x0104 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE1__FB_A26                                     0x0104 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE2__PTE2                                       0x0108 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE2__FXIO1_D29                                  0x0108 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE2__LPSPI2_PCS3                                0x0108 0x02A8 0x3 0x2
+#define IMX7ULP_PAD_PTE2__LPUART4_TX                                 0x0108 0x024C 0x4 0x2
+#define IMX7ULP_PAD_PTE2__LPI2C4_HREQ                                0x0108 0x0274 0x5 0x2
+#define IMX7ULP_PAD_PTE2__SDHC1_CLK                                  0x0108 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE3__PTE3                                       0x010C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE3__FXIO1_D28                                  0x010C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE3__LPUART4_RX                                 0x010C 0x0248 0x4 0x2
+#define IMX7ULP_PAD_PTE3__TPM5_CH1                                   0x010C 0x02C8 0x6 0x2
+#define IMX7ULP_PAD_PTE3__SDHC1_CMD                                  0x010C 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE4__PTE4                                       0x0110 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE4__FXIO1_D27                                  0x0110 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE4__LPSPI2_SIN                                 0x0110 0x02B0 0x3 0x2
+#define IMX7ULP_PAD_PTE4__LPUART5_CTS_B                              0x0110 0x0250 0x4 0x2
+#define IMX7ULP_PAD_PTE4__LPI2C5_SCL                                 0x0110 0x02BC 0x5 0x2
+#define IMX7ULP_PAD_PTE4__TPM5_CLKIN                                 0x0110 0x02CC 0x6 0x2
+#define IMX7ULP_PAD_PTE4__SDHC1_D3                                   0x0110 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__PTE5                                       0x0114 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE5__FXIO1_D26                                  0x0114 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE5__LPSPI2_SOUT                                0x0114 0x02B4 0x3 0x2
+#define IMX7ULP_PAD_PTE5__LPUART5_RTS_B                              0x0114 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE5__LPI2C5_SDA                                 0x0114 0x02C0 0x5 0x2
+#define IMX7ULP_PAD_PTE5__TPM5_CH0                                   0x0114 0x02C4 0x6 0x2
+#define IMX7ULP_PAD_PTE5__SDHC1_D2                                   0x0114 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__VIU_DE                                     0x0114 0x033C 0xc 0x2
+#define IMX7ULP_PAD_PTE6__PTE6                                       0x0118 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE6__FXIO1_D25                                  0x0118 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE6__LPSPI2_SCK                                 0x0118 0x02AC 0x3 0x2
+#define IMX7ULP_PAD_PTE6__LPUART5_TX                                 0x0118 0x0258 0x4 0x2
+#define IMX7ULP_PAD_PTE6__LPI2C5_HREQ                                0x0118 0x02B8 0x5 0x2
+#define IMX7ULP_PAD_PTE6__TPM7_CH3                                   0x0118 0x02E8 0x6 0x2
+#define IMX7ULP_PAD_PTE6__SDHC1_D4                                   0x0118 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE6__FB_A17                                     0x0118 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE6__USB0_OC                                    0x0118 0x0330 0xb 0x1
+#define IMX7ULP_PAD_PTE7__PTE7                                       0x011C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE7__FXIO1_D24                                  0x011C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE7__LPSPI2_PCS0                                0x011C 0x029C 0x3 0x2
+#define IMX7ULP_PAD_PTE7__LPUART5_RX                                 0x011C 0x0254 0x4 0x2
+#define IMX7ULP_PAD_PTE7__TPM7_CH4                                   0x011C 0x02EC 0x6 0x2
+#define IMX7ULP_PAD_PTE7__SDHC1_D5                                   0x011C 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE7__FB_A18                                     0x011C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE7__TRACE_D7                                   0x011C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE7__USB0_PWR                                   0x011C 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE7__VIU_FID                                    0x011C 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE8__PTE8                                       0x0120 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE8__TRACE_D6                                   0x0120 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE8__VIU_D16                                    0x0120 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE8__FXIO1_D23                                  0x0120 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE8__LPSPI3_PCS1                                0x0120 0x0314 0x3 0x2
+#define IMX7ULP_PAD_PTE8__LPUART6_CTS_B                              0x0120 0x025C 0x4 0x2
+#define IMX7ULP_PAD_PTE8__LPI2C6_SCL                                 0x0120 0x02FC 0x5 0x2
+#define IMX7ULP_PAD_PTE8__TPM7_CH5                                   0x0120 0x02F0 0x6 0x2
+#define IMX7ULP_PAD_PTE8__SDHC1_WP                                   0x0120 0x0200 0x7 0x1
+#define IMX7ULP_PAD_PTE8__SDHC1_D6                                   0x0120 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE8__FB_CS3_B_FB_BE7_0_BLS31_24_B               0x0120 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE9__PTE9                                       0x0124 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE9__TRACE_D5                                   0x0124 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE9__VIU_D17                                    0x0124 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE9__FXIO1_D22                                  0x0124 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE9__LPSPI3_PCS2                                0x0124 0x0318 0x3 0x2
+#define IMX7ULP_PAD_PTE9__LPUART6_RTS_B                              0x0124 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE9__LPI2C6_SDA                                 0x0124 0x0300 0x5 0x2
+#define IMX7ULP_PAD_PTE9__TPM7_CLKIN                                 0x0124 0x02F4 0x6 0x2
+#define IMX7ULP_PAD_PTE9__SDHC1_CD                                   0x0124 0x032C 0x7 0x1
+#define IMX7ULP_PAD_PTE9__SDHC1_D7                                   0x0124 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE9__FB_TBST_B_FB_CS2_B_FB_BE15_8_BLS23_16_B    0x0124 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE10__PTE10                                     0x0128 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE10__TRACE_D4                                  0x0128 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE10__VIU_D18                                   0x0128 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE10__FXIO1_D21                                 0x0128 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE10__LPSPI3_PCS3                               0x0128 0x031C 0x3 0x2
+#define IMX7ULP_PAD_PTE10__LPUART6_TX                                0x0128 0x0264 0x4 0x2
+#define IMX7ULP_PAD_PTE10__LPI2C6_HREQ                               0x0128 0x02F8 0x5 0x2
+#define IMX7ULP_PAD_PTE10__TPM7_CH0                                  0x0128 0x02DC 0x6 0x2
+#define IMX7ULP_PAD_PTE10__SDHC1_VS                                  0x0128 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTE10__SDHC1_DQS                                 0x0128 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE10__FB_A19                                    0x0128 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE11__PTE11                                     0x012C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE11__TRACE_D3                                  0x012C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE11__VIU_D19                                   0x012C 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE11__FXIO1_D20                                 0x012C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE11__LPUART6_RX                                0x012C 0x0260 0x4 0x2
+#define IMX7ULP_PAD_PTE11__TPM7_CH1                                  0x012C 0x02E0 0x6 0x2
+#define IMX7ULP_PAD_PTE11__SDHC1_RESET_B                             0x012C 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE11__FB_A20                                    0x012C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE12__PTE12                                     0x0130 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE12__FXIO1_D19                                 0x0130 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE12__LPSPI3_SIN                                0x0130 0x0324 0x3 0x2
+#define IMX7ULP_PAD_PTE12__LPUART7_CTS_B                             0x0130 0x0268 0x4 0x2
+#define IMX7ULP_PAD_PTE12__LPI2C7_SCL                                0x0130 0x0308 0x5 0x2
+#define IMX7ULP_PAD_PTE12__TPM7_CH2                                  0x0130 0x02E4 0x6 0x2
+#define IMX7ULP_PAD_PTE12__SDHC1_WP                                  0x0130 0x0200 0x8 0x2
+#define IMX7ULP_PAD_PTE12__FB_A21                                    0x0130 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE12__TRACE_D2                                  0x0130 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE12__USB1_OC2                                  0x0130 0x0334 0xb 0x2
+#define IMX7ULP_PAD_PTE12__VIU_D20                                   0x0130 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE13__PTE13                                     0x0134 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE13__FXIO1_D18                                 0x0134 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE13__LPSPI3_SOUT                               0x0134 0x0328 0x3 0x2
+#define IMX7ULP_PAD_PTE13__LPUART7_RTS_B                             0x0134 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE13__LPI2C7_SDA                                0x0134 0x030C 0x5 0x2
+#define IMX7ULP_PAD_PTE13__TPM6_CLKIN                                0x0134 0x02D8 0x6 0x2
+#define IMX7ULP_PAD_PTE13__SDHC1_CD                                  0x0134 0x032C 0x8 0x2
+#define IMX7ULP_PAD_PTE13__FB_A22                                    0x0134 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE13__TRACE_D1                                  0x0134 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE13__USB1_PWR2                                 0x0134 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE13__VIU_D21                                   0x0134 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE14__PTE14                                     0x0138 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE14__FXIO1_D17                                 0x0138 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE14__LPSPI3_SCK                                0x0138 0x0320 0x3 0x2
+#define IMX7ULP_PAD_PTE14__LPUART7_TX                                0x0138 0x0270 0x4 0x2
+#define IMX7ULP_PAD_PTE14__LPI2C7_HREQ                               0x0138 0x0304 0x5 0x2
+#define IMX7ULP_PAD_PTE14__TPM6_CH0                                  0x0138 0x02D0 0x6 0x2
+#define IMX7ULP_PAD_PTE14__SDHC1_VS                                  0x0138 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE14__FB_A23                                    0x0138 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE14__TRACE_D0                                  0x0138 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE14__USB0_OC                                   0x0138 0x0330 0xb 0x2
+#define IMX7ULP_PAD_PTE14__VIU_D22                                   0x0138 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE15__PTE15                                     0x013C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE15__FXIO1_D16                                 0x013C 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE15__LPSPI3_PCS0                               0x013C 0x0310 0x3 0x2
+#define IMX7ULP_PAD_PTE15__LPUART7_RX                                0x013C 0x026C 0x4 0x2
+#define IMX7ULP_PAD_PTE15__TPM6_CH1                                  0x013C 0x02D4 0x6 0x2
+#define IMX7ULP_PAD_PTE15__FB_A24                                    0x013C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE15__TRACE_CLKOUT                              0x013C 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE15__USB0_PWR                                  0x013C 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE15__VIU_D23                                   0x013C 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF0__PTF0                                       0x0180 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF0__LPUART4_CTS_B                              0x0180 0x0244 0x4 0x3
+#define IMX7ULP_PAD_PTF0__LPI2C4_SCL                                 0x0180 0x0278 0x5 0x3
+#define IMX7ULP_PAD_PTF0__TPM4_CLKIN                                 0x0180 0x0298 0x6 0x3
+#define IMX7ULP_PAD_PTF0__FB_RW_B                                    0x0180 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF0__VIU_DE                                     0x0180 0x033C 0xc 0x0
+#define IMX7ULP_PAD_PTF1__PTF1                                       0x0184 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF1__LPUART4_RTS_B                              0x0184 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF1__LPI2C4_SDA                                 0x0184 0x027C 0x5 0x3
+#define IMX7ULP_PAD_PTF1__TPM4_CH0                                   0x0184 0x0280 0x6 0x3
+#define IMX7ULP_PAD_PTF1__CLKOUT                                     0x0184 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF1__VIU_HSYNC                                  0x0184 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF2__PTF2                                       0x0188 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF2__LPUART4_TX                                 0x0188 0x024C 0x4 0x3
+#define IMX7ULP_PAD_PTF2__LPI2C4_HREQ                                0x0188 0x0274 0x5 0x3
+#define IMX7ULP_PAD_PTF2__TPM4_CH1                                   0x0188 0x0284 0x6 0x3
+#define IMX7ULP_PAD_PTF2__FB_TSIZ1_FB_CS5_B_FB_BE23_16_BLS15_8_B     0x0188 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF2__VIU_VSYNC                                  0x0188 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF3__PTF3                                       0x018C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF3__LPUART4_RX                                 0x018C 0x0248 0x4 0x3
+#define IMX7ULP_PAD_PTF3__TPM4_CH2                                   0x018C 0x0288 0x6 0x3
+#define IMX7ULP_PAD_PTF3__FB_AD16                                    0x018C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF3__VIU_PCLK                                   0x018C 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF4__PTF4                                       0x0190 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF4__FXIO1_D0                                   0x0190 0x0204 0x2 0x2
+#define IMX7ULP_PAD_PTF4__LPSPI2_PCS1                                0x0190 0x02A0 0x3 0x3
+#define IMX7ULP_PAD_PTF4__LPUART5_CTS_B                              0x0190 0x0250 0x4 0x3
+#define IMX7ULP_PAD_PTF4__LPI2C5_SCL                                 0x0190 0x02BC 0x5 0x3
+#define IMX7ULP_PAD_PTF4__TPM4_CH3                                   0x0190 0x028C 0x6 0x2
+#define IMX7ULP_PAD_PTF4__FB_AD17                                    0x0190 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF4__VIU_D0                                     0x0190 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF5__PTF5                                       0x0194 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF5__FXIO1_D1                                   0x0194 0x0208 0x2 0x2
+#define IMX7ULP_PAD_PTF5__LPSPI2_PCS2                                0x0194 0x02A4 0x3 0x3
+#define IMX7ULP_PAD_PTF5__LPUART5_RTS_B                              0x0194 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF5__LPI2C5_SDA                                 0x0194 0x02C0 0x5 0x3
+#define IMX7ULP_PAD_PTF5__TPM4_CH4                                   0x0194 0x0290 0x6 0x2
+#define IMX7ULP_PAD_PTF5__FB_AD18                                    0x0194 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF5__VIU_D1                                     0x0194 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF6__PTF6                                       0x0198 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF6__FXIO1_D2                                   0x0198 0x020C 0x2 0x2
+#define IMX7ULP_PAD_PTF6__LPSPI2_PCS3                                0x0198 0x02A8 0x3 0x3
+#define IMX7ULP_PAD_PTF6__LPUART5_TX                                 0x0198 0x0258 0x4 0x3
+#define IMX7ULP_PAD_PTF6__LPI2C5_HREQ                                0x0198 0x02B8 0x5 0x3
+#define IMX7ULP_PAD_PTF6__TPM4_CH5                                   0x0198 0x0294 0x6 0x2
+#define IMX7ULP_PAD_PTF6__FB_AD19                                    0x0198 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF6__VIU_D2                                     0x0198 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF7__PTF7                                       0x019C 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF7__FXIO1_D3                                   0x019C 0x0210 0x2 0x2
+#define IMX7ULP_PAD_PTF7__LPUART5_RX                                 0x019C 0x0254 0x4 0x3
+#define IMX7ULP_PAD_PTF7__TPM5_CH1                                   0x019C 0x02C8 0x6 0x3
+#define IMX7ULP_PAD_PTF7__FB_AD20                                    0x019C 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF7__VIU_D3                                     0x019C 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF8__PTF8                                       0x01A0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF8__FXIO1_D4                                   0x01A0 0x0214 0x2 0x2
+#define IMX7ULP_PAD_PTF8__LPSPI2_SIN                                 0x01A0 0x02B0 0x3 0x3
+#define IMX7ULP_PAD_PTF8__LPUART6_CTS_B                              0x01A0 0x025C 0x4 0x3
+#define IMX7ULP_PAD_PTF8__LPI2C6_SCL                                 0x01A0 0x02FC 0x5 0x3
+#define IMX7ULP_PAD_PTF8__TPM5_CLKIN                                 0x01A0 0x02CC 0x6 0x3
+#define IMX7ULP_PAD_PTF8__FB_AD21                                    0x01A0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF8__USB1_CLK                                   0x01A0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF8__VIU_D4                                     0x01A0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF9__PTF9                                       0x01A4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF9__FXIO1_D5                                   0x01A4 0x0218 0x2 0x2
+#define IMX7ULP_PAD_PTF9__LPSPI2_SOUT                                0x01A4 0x02B4 0x3 0x3
+#define IMX7ULP_PAD_PTF9__LPUART6_RTS_B                              0x01A4 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF9__LPI2C6_SDA                                 0x01A4 0x0300 0x5 0x3
+#define IMX7ULP_PAD_PTF9__TPM5_CH0                                   0x01A4 0x02C4 0x6 0x3
+#define IMX7ULP_PAD_PTF9__FB_AD22                                    0x01A4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF9__USB1_NXT                                   0x01A4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF9__VIU_D5                                     0x01A4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF10__PTF10                                     0x01A8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF10__FXIO1_D6                                  0x01A8 0x021C 0x2 0x2
+#define IMX7ULP_PAD_PTF10__LPSPI2_SCK                                0x01A8 0x02AC 0x3 0x3
+#define IMX7ULP_PAD_PTF10__LPUART6_TX                                0x01A8 0x0264 0x4 0x3
+#define IMX7ULP_PAD_PTF10__LPI2C6_HREQ                               0x01A8 0x02F8 0x5 0x3
+#define IMX7ULP_PAD_PTF10__TPM7_CH3                                  0x01A8 0x02E8 0x6 0x3
+#define IMX7ULP_PAD_PTF10__FB_AD23                                   0x01A8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF10__USB1_STP                                  0x01A8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF10__VIU_D6                                    0x01A8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF11__PTF11                                     0x01AC 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF11__FXIO1_D7                                  0x01AC 0x0220 0x2 0x2
+#define IMX7ULP_PAD_PTF11__LPSPI2_PCS0                               0x01AC 0x029C 0x3 0x3
+#define IMX7ULP_PAD_PTF11__LPUART6_RX                                0x01AC 0x0260 0x4 0x3
+#define IMX7ULP_PAD_PTF11__TPM7_CH4                                  0x01AC 0x02EC 0x6 0x3
+#define IMX7ULP_PAD_PTF11__FB_CS4_B_FB_TSIZ0_FB_BE31_24_BLS7_0_B     0x01AC 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF11__USB1_DIR                                  0x01AC 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF11__VIU_D7                                    0x01AC 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF12__PTF12                                     0x01B0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF12__FXIO1_D8                                  0x01B0 0x0224 0x2 0x2
+#define IMX7ULP_PAD_PTF12__LPSPI3_PCS1                               0x01B0 0x0314 0x3 0x3
+#define IMX7ULP_PAD_PTF12__LPUART7_CTS_B                             0x01B0 0x0268 0x4 0x3
+#define IMX7ULP_PAD_PTF12__LPI2C7_SCL                                0x01B0 0x0308 0x5 0x3
+#define IMX7ULP_PAD_PTF12__TPM7_CH5                                  0x01B0 0x02F0 0x6 0x3
+#define IMX7ULP_PAD_PTF12__FB_AD24                                   0x01B0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF12__USB1_DATA0                                0x01B0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF12__VIU_D8                                    0x01B0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF13__PTF13                                     0x01B4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF13__FXIO1_D9                                  0x01B4 0x0228 0x2 0x2
+#define IMX7ULP_PAD_PTF13__LPSPI3_PCS2                               0x01B4 0x0318 0x3 0x3
+#define IMX7ULP_PAD_PTF13__LPUART7_RTS_B                             0x01B4 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF13__LPI2C7_SDA                                0x01B4 0x030C 0x5 0x3
+#define IMX7ULP_PAD_PTF13__TPM7_CLKIN                                0x01B4 0x02F4 0x6 0x3
+#define IMX7ULP_PAD_PTF13__FB_AD25                                   0x01B4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF13__USB1_DATA1                                0x01B4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF13__VIU_D9                                    0x01B4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF14__PTF14                                     0x01B8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF14__FXIO1_D10                                 0x01B8 0x022C 0x2 0x2
+#define IMX7ULP_PAD_PTF14__LPSPI3_PCS3                               0x01B8 0x031C 0x3 0x3
+#define IMX7ULP_PAD_PTF14__LPUART7_TX                                0x01B8 0x0270 0x4 0x3
+#define IMX7ULP_PAD_PTF14__LPI2C7_HREQ                               0x01B8 0x0304 0x5 0x3
+#define IMX7ULP_PAD_PTF14__TPM7_CH0                                  0x01B8 0x02DC 0x6 0x3
+#define IMX7ULP_PAD_PTF14__FB_AD26                                   0x01B8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF14__USB1_DATA2                                0x01B8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF14__VIU_D10                                   0x01B8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF15__PTF15                                     0x01BC 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF15__FXIO1_D11                                 0x01BC 0x0230 0x2 0x2
+#define IMX7ULP_PAD_PTF15__LPUART7_RX                                0x01BC 0x026C 0x4 0x3
+#define IMX7ULP_PAD_PTF15__TPM7_CH1                                  0x01BC 0x02E0 0x6 0x3
+#define IMX7ULP_PAD_PTF15__FB_AD27                                   0x01BC 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF15__USB1_DATA3                                0x01BC 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF15__VIU_D11                                   0x01BC 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF16__PTF16                                     0x01C0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF16__USB1_DATA4                                0x01C0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF16__VIU_D12                                   0x01C0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF16__FXIO1_D12                                 0x01C0 0x0234 0x2 0x2
+#define IMX7ULP_PAD_PTF16__LPSPI3_SIN                                0x01C0 0x0324 0x3 0x3
+#define IMX7ULP_PAD_PTF16__TPM7_CH2                                  0x01C0 0x02E4 0x6 0x3
+#define IMX7ULP_PAD_PTF16__FB_AD28                                   0x01C0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF17__PTF17                                     0x01C4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF17__USB1_DATA5                                0x01C4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF17__VIU_D13                                   0x01C4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF17__FXIO1_D13                                 0x01C4 0x0238 0x2 0x2
+#define IMX7ULP_PAD_PTF17__LPSPI3_SOUT                               0x01C4 0x0328 0x3 0x3
+#define IMX7ULP_PAD_PTF17__TPM6_CLKIN                                0x01C4 0x02D8 0x6 0x3
+#define IMX7ULP_PAD_PTF17__FB_AD29                                   0x01C4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF18__PTF18                                     0x01C8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF18__USB1_DATA6                                0x01C8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF18__VIU_D14                                   0x01C8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF18__FXIO1_D14                                 0x01C8 0x023C 0x2 0x2
+#define IMX7ULP_PAD_PTF18__LPSPI3_SCK                                0x01C8 0x0320 0x3 0x3
+#define IMX7ULP_PAD_PTF18__TPM6_CH0                                  0x01C8 0x02D0 0x6 0x3
+#define IMX7ULP_PAD_PTF18__FB_AD30                                   0x01C8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF19__PTF19                                     0x01CC 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF19__USB1_DATA7                                0x01CC 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF19__VIU_D15                                   0x01CC 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF19__FXIO1_D15                                 0x01CC 0x0240 0x2 0x2
+#define IMX7ULP_PAD_PTF19__LPSPI3_PCS0                               0x01CC 0x0310 0x3 0x3
+#define IMX7ULP_PAD_PTF19__TPM6_CH1                                  0x01CC 0x02D4 0x6 0x3
+#define IMX7ULP_PAD_PTF19__FB_AD31                                   0x01CC 0x0000 0x9 0x0
+
+#endif /* __DTS_IMX7ULP_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx7ulp-uboot.dtsi b/roms/u-boot/arch/arm/dts/imx7ulp-uboot.dtsi
new file mode 100644
index 000000000..712cec492
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7ulp-uboot.dtsi
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&soc {
+       u-boot,dm-pre-reloc;
+};
+
+&ahbbridge0 {
+       u-boot,dm-pre-reloc;
+};
+
+&ahbbridge1 {
+       u-boot,dm-pre-reloc;
+};
+
+&iomuxc {
+       u-boot,dm-pre-reloc;
+};
+
+&iomuxc1 {
+       u-boot,dm-pre-reloc;
+};
+
+&lpuart4 {
+       u-boot,dm-pre-reloc;
+};
+
+&lpuart5 {
+       u-boot,dm-pre-reloc;
+};
+
+&lpuart6 {
+       u-boot,dm-pre-reloc;
+};
+
+&lpuart7 {
+       u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx7ulp.dtsi b/roms/u-boot/arch/arm/dts/imx7ulp.dtsi
new file mode 100644
index 000000000..7bcd2cc34
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx7ulp.dtsi
@@ -0,0 +1,618 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx7ulp-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+#include "imx7ulp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	aliases {
+		gpio0 = &gpio4;
+		gpio1 = &gpio5;
+		gpio2 = &gpio0;
+		gpio3 = &gpio1;
+		gpio4 = &gpio2;
+		gpio5 = &gpio3;
+		mmc0 = &usdhc0;
+		mmc1 = &usdhc1;
+		serial0 = &lpuart4;
+		serial1 = &lpuart5;
+		serial2 = &lpuart6;
+		serial3 = &lpuart7;
+		usbphy0 = &usbphy1;
+		usb0 = &usbotg1;
+		i2c4 = &lpi2c4;
+		i2c5 = &lpi2c5;
+		i2c6 = &lpi2c6;
+		i2c7 = &lpi2c7;
+		spi0 = &qspi1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0xC000000>;
+			alignment = <0x2000>;
+			linux,cma-default;
+		};
+
+		rpmsg_reserved: rpmsg@9FFF0000 {
+			no-map;
+			reg = <0x9FF00000 0x100000>;
+		};
+
+	};
+
+	intc: interrupt-controller@40021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x40021000 0x1000>,
+		      <0x40022000 0x100>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil: clock@0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "ckil";
+		};
+
+		osc: clock@1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc";
+		};
+
+		sirc: clock@2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "sirc";
+		};
+
+		firc: clock@3 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "firc";
+		};
+
+		upll: clock@4 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <480000000>;
+			clock-output-names = "upll";
+		};
+
+		mpll: clock@5 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <480000000>;
+			clock-output-names = "mpll";
+		};
+	};
+
+	sram: sram@20000000 {
+		compatible = "fsl,lpm-sram";
+		reg = <0x1fffc000 0x4000>;
+	};
+
+	ahbbridge0: ahb-bridge0@40000000 {
+		compatible = "fsl,aips-bus", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x40000000 0x800000>;
+		ranges;
+
+		edma0: dma-controller@40080000 {
+			#dma-cells = <2>;
+			compatible = "nxp,imx7ulp-edma";
+			reg = <0x40080000 0x2000>,
+				<0x40210000 0x1000>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&clks IMX7ULP_CLK_DMA1>, <&clks IMX7ULP_CLK_DMA_MUX1>;
+		};
+
+		mu: mu@40220000 {
+			compatible = "fsl,imx7ulp-mu", "fsl,imx6sx-mu";
+			reg = <0x40220000 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		nmi: nmi@40220000 {
+			compatible = "fsl,imx7ulp-nmi";
+			reg = <0x40220000 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		rpmsg: rpmsg{
+			compatible = "fsl,imx7ulp-rpmsg";
+			memory-region = <&rpmsg_reserved>;
+			status = "disabled";
+		};
+
+		snvs: snvs@40230000 {
+			compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+			reg = <0x40230000 0x10000>;
+
+			snvs_rtc: snvs-rtc-lp{
+				compatible = "fsl,sec-v4.0-mon-rtc-lp";
+				regmap =<&snvs>;
+				offset = <0x34>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "snvs-rtc";
+				clocks = <&clks IMX7ULP_CLK_SNVS>;
+			};
+		};
+
+		tpm5: tpm@40260000 {
+			compatible = "fsl,imx7ulp-tpm";
+			reg = <0x40260000 0x1000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPTPM5>;
+		};
+
+		lpit: 1@40270000 {
+			compatible = "fsl,imx-lpit";
+			reg = <0x40270000 0x1000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			/*    clocks = <&lpclk>;*/
+			clocks = <&clks IMX7ULP_CLK_LPIT1>;
+			assigned-clock-rates = <48000000>;
+			assigned-clocks = <&clks IMX7ULP_CLK_LPIT1>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+		};
+
+		lpi2c4: lpi2c4@402B0000 {
+			compatible = "fsl,imx7ulp-lpi2c";
+			reg = <0x402B0000 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPI2C4>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPI2C4>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpi2c5: lpi2c4@402C0000 {
+			compatible = "fsl,imx7ulp-lpi2c";
+			reg = <0x402C0000 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPI2C5>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPI2C5>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpspi2: lpspi@40290000 {
+			compatible = "fsl,imx7ulp-spi";
+			reg = <0x40290000 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPSPI2>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPSPI2>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpspi3: lpspi@402A0000 {
+			compatible = "fsl,imx7ulp-spi";
+			reg = <0x402A0000 0x10000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPSPI3>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPSPI3>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpuart4: serial@402D0000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x402D0000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPUART4>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPUART4>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_OSC>;
+			assigned-clock-rates = <24000000>;
+			status = "disabled";
+		};
+
+		lpuart5: serial@402E0000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x402E0000 0x1000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPUART5>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPUART5>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			dmas = <&edma0 0 20>, <&edma0 0 19>;
+			dma-names = "tx","rx";
+			status = "disabled";
+		};
+
+		usbotg1: usb@40330000 {
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb",
+				"fsl,imx27-usb";
+			reg = <0x40330000 0x200>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_USB0>;
+			fsl,usbphy = <&usbphy1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			ahb-burst-config = <0x0>;
+			tx-burst-size-dword = <0x8>;
+			rx-burst-size-dword = <0x8>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@40330200 {
+			#index-cells = <1>;
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
+				"fsl,imx6q-usbmisc";
+			reg = <0x40330200 0x200>;
+		};
+
+		usbphy1: usbphy@0x40350000 {
+			compatible = "fsl,imx7ulp-usbphy",
+				"fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+			reg = <0x40350000 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_USB_PHY>;
+			nxp,sim = <&sim>;
+		};
+
+		usdhc0: usdhc@40370000 {
+			compatible = "fsl,imx7ulp-usdhc";
+			reg = <0x40370000 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&clks IMX7ULP_CLK_NIC1_DIV>,
+				 <&clks IMX7ULP_CLK_USDHC0>;
+			clock-names ="ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step= <2>;
+			status = "disabled";
+		};
+
+		usdhc1: usdhc@40380000 {
+			compatible = "fsl,imx7ulp-usdhc";
+			reg = <0x40380000 0x10000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&clks IMX7ULP_CLK_NIC1_DIV>,
+				 <&clks IMX7ULP_CLK_USDHC1>;
+			clock-names ="ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step= <2>;
+			status = "disabled";
+		};
+
+		wdog1: wdog@403D0000 {
+			compatible = "fsl,imx7ulp-wdt";
+			reg = <0x403D0000 0x10000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_WDG1>;
+			assigned-clocks = <&clks IMX7ULP_CLK_WDG1>;
+			assigned-clocks-parents = <&clks IMX7ULP_CLK_FIRC>;
+			/*
+			 * As the 1KHz LPO clock rate is not trimed,the actually clock
+			 * is about 667Hz, so the init timeout 60s should set 40*1000
+			 * in the TOVAL register.
+			 */
+			timeout-sec = <40>;
+		};
+
+		wdog2: wdog@40430000 {
+			compatible = "fsl,imx7ulp-wdt";
+			reg = <0x40430000 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_WDG2>;
+			assigned-clocks = <&clks IMX7ULP_CLK_WDG2>;
+			assigned-clocks-parents = <&clks IMX7ULP_CLK_FIRC>;
+			timeout-sec = <40>;
+		};
+
+		clks: scg1@403E0000 {
+			compatible = "fsl,imx7ulp-scg1";
+			reg = <0x403E0000 0x10000>;
+			clocks = <&ckil>, <&osc>, <&sirc>,
+				<&firc>, <&upll>, <&mpll>;
+			clock-names = "ckil", "osc", "sirc",
+				"firc", "upll", "mpll";
+			#clock-cells = <1>;
+			assigned-clocks = <&clks IMX7ULP_CLK_LPTPM5>,
+					  <&clks IMX7ULP_CLK_USDHC1>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_OSC>,
+						 <&clks IMX7ULP_CLK_NIC1_DIV>;
+		};
+
+		pcc2: pcc2@403F0000 {
+			compatible  = "fsl,imx7ulp-pcc2";
+			reg = <0x403F0000 0x10000>;
+		};
+
+		pmc1: pmc1@40400000 {
+			compatible = "fsl,imx7ulp-pmc1";
+			reg = <0x40400000 0x1000>;
+		};
+
+		smc1: smc1@40410000 {
+			compatible = "fsl,imx7ulp-smc1";
+			reg = <0x40410000 0x1000>;
+		};
+
+	};
+
+	ahbbridge1: ahb-bridge1@40800000 {
+		compatible = "fsl,aips-bus", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x40800000 0x800000>;
+		ranges;
+
+		lpi2c6: lpi2c6@40A40000 {
+			compatible = "fsl,imx7ulp-lpi2c";
+			reg = <0x40A40000 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPI2C6>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPI2C6>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpi2c7: lpi2c7@40A50000 {
+			compatible = "fsl,imx7ulp-lpi2c";
+			reg = <0x40A50000 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPI2C7>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPI2C7>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpuart6: serial@40A60000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x40A60000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPUART6>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPUART6>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			dmas = <&edma0 0 22>, <&edma0 0 21>;
+			dma-names = "tx","rx";
+			status = "disabled";
+		};
+
+		lpuart7: serial@40A70000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x40A70000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_LPUART7>;
+			clock-names = "ipg";
+			assigned-clocks = <&clks IMX7ULP_CLK_LPUART7>;
+			assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&edma0 0 24>, <&edma0 0 23>;
+			dma-names = "tx","rx";
+			status = "disabled";
+		};
+
+		lcdif: lcdif@40AA0000 {
+			compatible = "fsl,imx7ulp-lcdif";
+			reg = <0x40aa0000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_DUMMY>,
+				 <&clks IMX7ULP_CLK_LCDIF>,
+				 <&clks IMX7ULP_CLK_DUMMY>;
+			clock-names = "axi", "pix", "disp_axi";
+			status = "disabled";
+		};
+
+		mipi_dsi: mipi_dsi@40A90000 {
+			compatible = "fsl,imx7ulp-mipi-dsi";
+			reg = <0x40A90000 0x10000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_DSI>;
+			clock-names = "mipi_dsi_clk";
+			sim = <&sim>;
+			status = "disabled";
+		};
+
+		mmdc: mmdc@40ab0000 {
+			compatible = "fsl,imx7ulp-mmdc";
+			reg = <0x40ab0000 0x4000>;
+		};
+
+		pcc3: pcc3@40B30000 {
+			compatible  = "fsl,imx7ulp-pcc3";
+			reg = <0x40B30000 0x10000>;
+		};
+
+		iomuxc: iomuxc@4103D000 {
+			compatible = "fsl,imx7ulp-iomuxc-0";
+			reg = <0x4103D000 0x1000>;
+			fsl,mux_mask = <0xf00>;
+			status = "disabled";
+		};
+
+		iomuxc1: iomuxc1@40ac0000 {
+			compatible = "fsl,imx7ulp-iomuxc-1";
+			reg = <0x40ac0000 0x1000>;
+			fsl,mux_mask = <0xf00>;
+		};
+
+		gpio4: gpio@4103f000 {
+			compatible = "fsl,imx7ulp-gpio";
+			reg = <0x4103f000 0x1000 0x4100F000 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&iomuxc 0 0 32>;
+		};
+
+		gpio5: gpio@41040000 {
+			compatible = "fsl,imx7ulp-gpio";
+			reg = <0x41040000 0x1000 0x4100F040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&iomuxc 0 32 32>;
+		};
+
+		gpio0: gpio@40ae0000 {
+			compatible = "fsl,imx7ulp-gpio";
+			reg = <0x40ae0000 0x1000 0x400F0000 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&iomuxc1 0 0 32>;
+		};
+
+		gpio1: gpio@40af0000 {
+			compatible = "fsl,imx7ulp-gpio";
+			reg = <0x40af0000 0x1000 0x400F0040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&iomuxc1 0 32 32>;
+		};
+
+		gpio2: gpio@40b00000 {
+			compatible = "fsl,imx7ulp-gpio";
+			reg = <0x40b00000 0x1000 0x400F0080 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&iomuxc1 0 64 32>;
+		};
+
+		gpio3: gpio@40b10000 {
+			compatible = "fsl,imx7ulp-gpio";
+			reg = <0x40b10000 0x1000 0x400F00c0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&iomuxc1 0 96 32>;
+		};
+
+		pmc0: pmc0@410a1000 {
+			compatible = "fsl,imx7ulp-pmc0";
+			reg = <0x410a1000 0x1000>;
+		};
+
+		sim: sim@410a3000 {
+			compatible = "fsl,imx7ulp-sim", "syscon";
+			reg = <0x410a3000 0x1000>;
+		};
+
+		qspi1: qspi@410A5000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx7ulp-qspi";
+			reg = <0x410A5000 0x10000>, <0xC0000000 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7ULP_CLK_DUMMY>,
+				 <&clks IMX7ULP_CLK_DUMMY>;
+			clock-names = "qspi_en", "qspi";
+			status = "disabled";
+		};
+
+		gpu: gpu@41800000 {
+			compatible = "fsl,imx6q-gpu";
+			reg = <0x41800000 0x80000>, <0x41880000 0x80000>,
+				<0x60000000 0x40000000>, <0x0 0x4000000>;
+			reg-names = "iobase_3d", "iobase_2d",
+				"phys_baseaddr", "contiguous_mem";
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irq_3d", "irq_2d";
+			clocks = <&clks IMX7ULP_CLK_GPU3D>,
+				<&clks IMX7ULP_CLK_NIC1_DIV>,
+				<&clks IMX7ULP_CLK_GPU_DIV>,
+				<&clks IMX7ULP_CLK_GPU2D>,
+				<&clks IMX7ULP_CLK_NIC1_DIV>,
+				<&clks IMX7ULP_CLK_NIC1_DIV>;
+			clock-names = "gpu3d_clk", "gpu3d_shader_clk",
+				"gpu3d_axi_clk", "gpu2d_clk",
+				"gpu2d_shader_clk", "gpu2d_axi_clk";
+		};
+	};
+
+  imx_ion {
+    compatible = "fsl,mxc-ion";
+    fsl,heap-id = <0>;
+  };
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8-deneb.dts b/roms/u-boot/arch/arm/dts/imx8-deneb.dts
new file mode 100644
index 000000000..04c764aa9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8-deneb.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Siemens AG
+ */
+
+#include "imx8qxp-capricorn.dtsi"
+
+/ {
+	model = "Siemens Deneb";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8-giedi.dts b/roms/u-boot/arch/arm/dts/imx8-giedi.dts
new file mode 100644
index 000000000..0dbfef2ee
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8-giedi.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Siemens AG
+ */
+
+#include "imx8qxp-capricorn.dtsi"
+
+/ {
+	model = "Siemens Giedi";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-beacon-baseboard.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
new file mode 100644
index 000000000..d6b9dedd1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led3>;
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "microchip,at25160bn", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <32>;
+		size = <2048>;
+		address-width = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		clock-names = "xclk";
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	pca6416_0: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
+			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
new file mode 100644
index 000000000..73ddfdade
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&fec1 {
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&pca6416_0 {
+	compatible = "ti,tca6416";
+};
+
+&pca6416_1 {
+	compatible = "ti,tca6416";
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-beacon-kit.dts b/roms/u-boot/arch/arm/dts/imx8mm-beacon-kit.dts
new file mode 100644
index 000000000..74a7b0cc1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-beacon-kit.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-beacon-som.dtsi"
+#include "imx8mm-beacon-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8M Mini Development Kit";
+	compatible = "beacon,imx8mm-beacon-kit", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-beacon-som.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-beacon-som.dtsi
new file mode 100644
index 000000000..d89791353
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-beacon-som.dtsi
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		max-speed = <4000000>;
+		clock-names = "extclk";
+	};
+};
+
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x19
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x166
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9		0x111
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
new file mode 100644
index 000000000..3226a244a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart3 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&i2c2 {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&fec1 {
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
+
+&binman {
+	u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "lpddr4_pmu_train_1d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "lpddr4_pmu_train_1d_dmem.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "lpddr4_pmu_train_2d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "lpddr4_pmu_train_2d_dmem.bin";
+			size = <0x4000>;
+		};
+	};
+
+	flash {
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x920000>;
+					entry = <0x920000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fip {
+					description = "Trusted Firmware FIP";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x40310000>;
+
+					fip_blob: blob-ext{
+						filename = "fip.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf", "fip";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-cl-iot-gate.dts b/roms/u-boot/arch/arm/dts/imx8mm-cl-iot-gate.dts
new file mode 100644
index 000000000..62e8d0394
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-cl-iot-gate.dts
@@ -0,0 +1,553 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "CompuLab IOT-GATE-iMX8";
+	compatible = "sb-iotgimx8", "cpl,ucm-imx8m-mini", "fsl,imx8mm-evk", "fsl,imx8mm";
+
+	chosen {
+		bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200";
+		stdout-path = &uart3;
+	};
+
+	reg_vusb_5v: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VUSB_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "usdhc2_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			at803x,led-act-blind-workaround;
+			at803x,eee-okay;
+			at803x,vddio-1p8v;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom@54 {
+		  compatible = "atmel,24c08";
+		  reg = <0x54>;
+		  pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		gpo {
+			rohm,drv = <0x0C>;      /* 0b0000_1100 all gpos with cmos output mode */
+		};
+
+		regulators {
+			bd71837,pmic-buck2-uses-i2c-dvs;
+			bd71837,pmic-buck2-dvs-voltage = <1000000>,
+				<900000>,
+				<0>; /* VDD_ARM: Run-Idle */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "BUCK7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "BUCK8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 8>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&i2c4 {/* Expansion connector I2C */
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pca9555: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	vbus-supply = <&reg_vusb_5v>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-1-8-v;
+	mmc-ddr-1_8v;
+	non-removable;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* USB VBUS enable GPIO */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x00
+		>;
+	};
+
+	pinctrl_hog_1: hoggrp-1 {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x140
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x140
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x1c4
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x84
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x84
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x84
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x84
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x84
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
+	pinctrl_uart3: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x49
+			MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x49
+			MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x49
+			MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-evk-u-boot.dtsi
new file mode 100644
index 000000000..f200afac9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-evk-u-boot.dtsi
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	fsl,signal-voltage-switch-extra-delay-ms = <8>;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25/regulators} {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&fec1 {
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
+
+&binman {
+	 u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "lpddr4_pmu_train_1d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "lpddr4_pmu_train_1d_dmem.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "lpddr4_pmu_train_2d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "lpddr4_pmu_train_2d_dmem.bin";
+			size = <0x4000>;
+		};
+	};
+
+
+       flash {
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x920000>;
+					entry = <0x920000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-evk.dts b/roms/u-boot/arch/arm/dts/imx8mm-evk.dts
new file mode 100644
index 000000000..4e2820d19
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-evk.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVK board";
+	compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+
+	aliases {
+		spi0 = &flexspi;
+	};
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x196
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-evk.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-evk.dtsi
new file mode 100644
index 000000000..60179e006
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-evk.dtsi
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+
+	wm8524: audio-codec {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_wlf>;
+		wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pca9450@25 {
+		reg = <0x25>;
+		compatible = "nxp,pca9450a";
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9450,pmic-buck2-uses-i2c-dvs;
+			/* Run/Standby voltage */
+			pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>;
+
+			buck1_reg: regulator@0 {
+				reg = <0>;
+				regulator-compatible = "buck1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2_reg: regulator@1 {
+				reg = <1>;
+				regulator-compatible = "buck2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck3_reg: regulator@2 {
+				reg = <2>;
+				regulator-compatible = "buck3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: regulator@3 {
+				reg = <3>;
+				regulator-compatible = "buck4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: regulator@4 {
+				reg = <4>;
+				regulator-compatible = "buck5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: regulator@5 {
+				reg = <5>;
+				regulator-compatible = "buck6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: regulator@6 {
+				reg = <6>;
+				regulator-compatible = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: regulator@7 {
+				reg = <7>;
+				regulator-compatible = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: regulator@8 {
+				reg = <8>;
+				regulator-compatible = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: regulator@9 {
+				reg = <9>;
+				regulator-compatible = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: regulator@10 {
+				reg = <10>;
+				regulator-compatible = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 8>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
+		>;
+	};
+
+	pinctrl_gpio_wlf: gpiowlfgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0xd6
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2-u-boot.dtsi
new file mode 100644
index 000000000..8b67bcff7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2-u-boot.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "imx8mm-icore-mx8mm-u-boot.dtsi"
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts
new file mode 100644
index 000000000..5389d6f2b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+	model = "Engicam i.Core MX8M Mini C.TOUCH 2.0";
+	compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm",
+		     "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	no-1-8-v;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2-u-boot.dtsi
new file mode 100644
index 000000000..8b67bcff7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2-u-boot.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "imx8mm-icore-mx8mm-u-boot.dtsi"
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts
new file mode 100644
index 000000000..a4a2ada14
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+	model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit";
+	compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm",
+		     "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	no-1-8-v;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-u-boot.dtsi
new file mode 100644
index 000000000..e7d179d63
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3_100mhz {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3_200mhz {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm.dtsi
new file mode 100644
index 000000000..b40148d72
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-icore-mx8mm.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+	compatible = "engicam,icore-mx8mm", "fsl,imx8mm";
+};
+
+&A53_0 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "nxp,pf8121a";
+		reg = <0x08>;
+
+		regulators {
+			reg_ldo1: ldo1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo2: ldo2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo3: ldo3 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo4: ldo4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck1: buck1 {
+				regulator-min-microvolt =  <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck2: buck2 {
+				regulator-min-microvolt =  <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck3: buck3 {
+				regulator-min-microvolt =  <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck4: buck4 {
+				regulator-min-microvolt =  <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck5: buck5 {
+				regulator-min-microvolt =  <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck6: buck6 {
+				regulator-min-microvolt =  <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck7: buck7 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x196
+		>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-pinfunc.h b/roms/u-boot/arch/arm/dts/imx8mm-pinfunc.h
new file mode 100644
index 000000000..5ccc4cc91
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-pinfunc.h
@@ -0,0 +1,645 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017-2018 NXP
+ */
+
+#ifndef __DTS_IMX8MM_PINFUNC_H
+#define __DTS_IMX8MM_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0                                   0x028 0x290 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT          0x028 0x290 0x4C0 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                          0x028 0x290 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                       0x028 0x290 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL                                    0x028 0x290 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1                                   0x02C 0x294 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT                                    0x02C 0x294 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                          0x02C 0x294 0x4BC 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                       0x02C 0x294 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE                                  0x02C 0x294 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2                                   0x030 0x298 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                0x030 0x298 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                              0x030 0x298 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_SJC_DE_B                                    0x030 0x298 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3                                   0x034 0x29C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                              0x034 0x29C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                            0x034 0x29C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                              0x034 0x29C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_SJC_DONE                                    0x034 0x29C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4                                   0x038 0x2A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                              0x038 0x2A0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                            0x038 0x2A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                           0x038 0x2A0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG                            0x038 0x2A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5                                   0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_M4_NMI                                      0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                     0x03C 0x2A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                       0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG                            0x03C 0x2A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6                                   0x040 0x2A8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_ENET1_MDC                                   0x040 0x2A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                 0x040 0x2A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                       0x040 0x2A8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG                            0x040 0x2A8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7                                   0x044 0x2AC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_ENET1_MDIO                                  0x044 0x2AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_USDHC1_WP                                   0x044 0x2AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                       0x044 0x2AC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG                            0x044 0x2AC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8                                   0x048 0x2B0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                        0x048 0x2B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                              0x048 0x2B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                           0x048 0x2B0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG                              0x048 0x2B0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9                                   0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                       0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                            0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                           0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG                           0x04C 0x2B4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10                                  0x050 0x2B8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                 0x050 0x2B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED             0x050 0x2B8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11                                  0x054 0x2BC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_USB2_OTG_ID                                 0x054 0x2BC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                     0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                           0x054 0x2BC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS                    0x054 0x2BC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12                                  0x058 0x2C0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                0x058 0x2C0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                            0x058 0x2C0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                           0x058 0x2C0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0                          0x058 0x2C0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13                                  0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                 0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT                                    0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                           0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1                          0x05C 0x2C4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14                                  0x060 0x2C8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR                                0x060 0x2C8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT                                    0x060 0x2C8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                          0x060 0x2C8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2                          0x060 0x2C8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15                                  0x064 0x2CC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC                                 0x064 0x2CC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT                                    0x064 0x2CC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                          0x064 0x2CC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB                             0x064 0x2CC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ENET_MDC_ENET1_MDC                                     0x068 0x2D0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_MDC_GPIO1_IO16                                    0x068 0x2D0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO                                   0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MM_IOMUXC_ENET_MDIO_GPIO1_IO17                                   0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                               0x070 0x2D8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18                                    0x070 0x2D8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                               0x074 0x2DC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK                                  0x074 0x2DC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19                                    0x074 0x2DC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                               0x078 0x2E0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20                                    0x078 0x2E0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                               0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21                                    0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                         0x080 0x2E8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                 0x080 0x2E8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                               0x084 0x2EC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TXC_ENET1_TX_ER                                   0x084 0x2EC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23                                    0x084 0x2EC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                         0x088 0x2F0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                 0x088 0x2F0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                               0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER                                   0x08C 0x2F4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_RXC_GPIO1_IO25                                    0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                               0x090 0x2F8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD0_GPIO1_IO26                                    0x090 0x2F8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                               0x094 0x2FC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD1_GPIO1_IO27                                    0x094 0x2FC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                               0x098 0x300 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD2_GPIO1_IO28                                    0x098 0x300 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                               0x09C 0x304 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD3_GPIO1_IO29                                    0x09C 0x304 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK                                     0x0A0 0x308 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0                                      0x0A0 0x308 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4                                    0x0B0 0x318 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3                                 0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5                                    0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4                                 0x0B8 0x320 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6                                    0x0B8 0x320 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5                                 0x0BC 0x324 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7                                    0x0BC 0x324 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6                                 0x0C0 0x328 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8                                    0x0C0 0x328 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7                                 0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9                                    0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                             0x0C8 0x330 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10                                 0x0C8 0x330 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE                               0x0CC 0x334 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11                                  0x0CC 0x334 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B                                   0x0D0 0x338 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12                                    0x0D0 0x338 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK                                     0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CLK_GPIO2_IO13                                     0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                          0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0                               0x0D4 0x33C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD                                     0x0D8 0x340 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CMD_GPIO2_IO14                                     0x0D8 0x340 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                          0x0D8 0x340 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1                               0x0D8 0x340 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0                                 0x0DC 0x344 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_GPIO2_IO15                                   0x0DC 0x344 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                        0x0DC 0x344 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2                             0x0DC 0x344 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1                                 0x0E0 0x348 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_GPIO2_IO16                                   0x0E0 0x348 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                            0x0E0 0x348 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3                             0x0E0 0x348 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2                                 0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_GPIO2_IO17                                   0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                            0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4                             0x0E4 0x34C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3                                 0x0E8 0x350 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_GPIO2_IO18                                   0x0E8 0x350 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                     0x0E8 0x350 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                             0x0EC 0x354 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19                                 0x0EC 0x354 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                  0x0EC 0x354 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_WP_USDHC2_WP                                       0x0F0 0x358 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_WP_GPIO2_IO20                                      0x0F0 0x358 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_WP_SIM_M_HMASTLOCK                                 0x0F0 0x358 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE                                   0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK                                   0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0                                     0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_ALE_SIM_M_HPROT0                                  0x0F4 0x35C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                               0x0F8 0x360 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                0x0F8 0x360 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1                                   0x0F8 0x360 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_SIM_M_HPROT1                                0x0F8 0x360 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                               0x0FC 0x364 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                0x0FC 0x364 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE                               0x0FC 0x364 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2                                   0x0FC 0x364 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_SIM_M_HPROT2                                0x0FC 0x364 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                               0x100 0x368 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                0x100 0x368 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5                                0x100 0x368 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3                                   0x100 0x368 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_SIM_M_HPROT3                                0x100 0x368 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                               0x104 0x36C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                0x104 0x36C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6                                0x104 0x36C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4                                   0x104 0x36C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_SIM_M_HADDR0                                0x104 0x36C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE                                   0x108 0x370 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK                                   0x108 0x370 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7                                  0x108 0x370 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5                                     0x108 0x370 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CLE_SIM_M_HADDR1                                  0x108 0x370 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00                             0x10C 0x374 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0                               0x10C 0x374 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6                                  0x10C 0x374 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_SIM_M_HADDR2                               0x10C 0x374 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01                             0x110 0x378 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1                               0x110 0x378 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7                                  0x110 0x378 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_SIM_M_HADDR3                               0x110 0x378 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02                             0x114 0x37C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2                               0x114 0x37C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8                                  0x114 0x37C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_SIM_M_HADDR4                               0x114 0x37C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03                             0x118 0x380 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3                               0x118 0x380 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9                                  0x118 0x380 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_SIM_M_HADDR5                               0x118 0x380 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04                             0x11C 0x384 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0                               0x11C 0x384 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0                               0x11C 0x384 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10                                 0x11C 0x384 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_SIM_M_HADDR6                               0x11C 0x384 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05                             0x120 0x388 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1                               0x120 0x388 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1                               0x120 0x388 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11                                 0x120 0x388 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_SIM_M_HADDR7                               0x120 0x388 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06                             0x124 0x38C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2                               0x124 0x38C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	                            0x124 0x38C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12                                 0x124 0x38C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_SIM_M_HADDR8                               0x124 0x38C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07                             0x128 0x390 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3                               0x128 0x390 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3                               0x128 0x390 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_GPIO3_IO13                                 0x128 0x390 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_SIM_M_HADDR9                               0x128 0x390 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DQS_RAWNAND_DQS                                   0x12C 0x394 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS                                    0x12C 0x394 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14                                    0x12C 0x394 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DQS_SIM_M_HADDR10                                 0x12C 0x394 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                 0x130 0x398 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_QSPI_B_DQS                                   0x130 0x398 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4                                 0x130 0x398 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15                                   0x130 0x398 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_SIM_M_HADDR11                                0x130 0x398 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B                           0x134 0x39C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16                                0x134 0x39C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_SIM_M_HADDR12                             0x134 0x39C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                 0x138 0x3A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK                                   0x138 0x3A0 0x000 0x12 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17                                   0x138 0x3A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_SIM_M_HADDR13                                0x138 0x3A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                 0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD                                   0x13C 0x3A4 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18                                   0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_SIM_M_HADDR14                                0x13C 0x3A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                 0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0                                0x140 0x3A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19                                   0x140 0x3A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                  0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_SAI1_TX_DATA1                                 0x144 0x3AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_PDM_CLK                                       0x144 0x3AC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20                                    0x144 0x3AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2                                0x148 0x3B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0                                    0x148 0x3B0 0x534 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21                                   0x148 0x3B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3                                0x14C 0x3B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC                                 0x14C 0x3B4 0x4CC 0x2 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                 0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1                                    0x14C 0x3B4 0x538 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22                                   0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4                                0x150 0x3B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC                                 0x150 0x3B8 0x4CC 0x2 0x1
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                 0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2                                    0x150 0x3B8 0x53c 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23                                   0x150 0x3B8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5                                0x154 0x3BC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC                                 0x154 0x3BC 0x4CC 0x2 0x2
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                0x154 0x3BC 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3                                    0x154 0x3BC 0x540 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24                                   0x154 0x3BC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK                                    0x158 0x3C0 0x52C 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK                                 0x158 0x3C0 0x4C8 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI4_MCLK                                    0x158 0x3C0 0x000 0x2 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25                                   0x158 0x3C0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK                      0x158 0x3C0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC                                 0x15C 0x3C4 0x4C4 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC                                 0x15C 0x3C4 0x4E4 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK                          0x15C 0x3C4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0                                    0x15C 0x3C4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SIM_M_HADDR15                                0x15C 0x3C4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SAI1_RX_BCLK                                  0x160 0x3C8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SAI5_RX_BCLK                                  0x160 0x3C8 0x4D0 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL                           0x160 0x3C8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1                                     0x160 0x3C8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SIM_M_HADDR16                                 0x160 0x3C8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0                                0x164 0x3CC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0                                0x164 0x3CC 0x4D4 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD0_PDM_DATA0                                    0x164 0x3CC 0x534 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0                             0x164 0x3CC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2                                    0x164 0x3CC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0                       0x164 0x3CC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SIM_M_HADDR17                                0x164 0x3CC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1                                0x168 0x3D0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1                                0x168 0x3D0 0x4D8 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD1_PDM_DATA1                                    0x168 0x3D0 0x538 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1                             0x168 0x3D0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3                                    0x168 0x3D0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1                       0x168 0x3D0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SIM_M_HADDR18                                0x168 0x3D0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2                                0x16C 0x3D4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2                                0x16C 0x3D4 0x4DC 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD2_PDM_DATA2                                    0x16C 0x3D4 0x53C 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2                             0x16C 0x3D4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4                                    0x16C 0x3D4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2                       0x16C 0x3D4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SIM_M_HADDR19                                0x16C 0x3D4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3                                0x170 0x3D8 0x4E0 0x0 0x1
+#define MX8MM_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3                                0x170 0x3D8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_PDM_DATA3                                    0x170 0x3D8 0x540 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3                             0x170 0x3D8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5                                    0x170 0x3D8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3                       0x170 0x3D8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_SIM_M_HADDR20                                0x170 0x3D8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4                                0x174 0x3DC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK                                 0x174 0x3DC 0x51C 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK                                 0x174 0x3DC 0x510 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4                             0x174 0x3DC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6                                    0x174 0x3DC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4                       0x174 0x3DC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SIM_M_HADDR21                                0x174 0x3DC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5                                0x178 0x3E0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0                                0x178 0x3E0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0                                0x178 0x3E0 0x514 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC                                 0x178 0x3E0 0x4C4 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5                             0x178 0x3E0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7                                    0x178 0x3E0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5                       0x178 0x3E0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SIM_M_HADDR22                                0x178 0x3E0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6                                0x17C 0x3E4 0x520 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC                                 0x17C 0x3E4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC                                 0x17C 0x3E4 0x518 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6                             0x17C 0x3E4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8                                    0x17C 0x3E4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6                       0x17C 0x3E4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SIM_M_HADDR23                                0x17C 0x3E4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7                                0x180 0x3E8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI6_MCLK                                    0x180 0x3E8 0x530 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC                                 0x180 0x3E8 0x4CC 0x2 0x4
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4                                0x180 0x3E8 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7                             0x180 0x3E8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9                                    0x180 0x3E8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7                       0x180 0x3E8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SIM_M_HADDR24                                0x180 0x3E8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC                                 0x184 0x3EC 0x4CC 0x0 0x3
+#define MX8MM_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC                                 0x184 0x3EC 0x4EC 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO                             0x184 0x3EC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10                                   0x184 0x3EC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_SIM_M_HADDR25                                0x184 0x3EC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK                                  0x188 0x3F0 0x4C8 0x0 0x1
+#define MX8MM_IOMUXC_SAI1_TXC_SAI5_TX_BCLK                                  0x188 0x3F0 0x4E8 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI                              0x188 0x3F0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11                                    0x188 0x3F0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_SIM_M_HADDR26                                 0x188 0x3F0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0                                0x18C 0x3F4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0                                0x18C 0x3F4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8                             0x18C 0x3F4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12                                   0x18C 0x3F4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8                       0x18C 0x3F4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SIM_M_HADDR27                                0x18C 0x3F4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1                                0x190 0x3F8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1                                0x190 0x3F8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9                             0x190 0x3F8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13                                   0x190 0x3F8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9                       0x190 0x3F8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SIM_M_HADDR28                                0x190 0x3F8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2                                0x194 0x3FC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2                                0x194 0x3FC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10                            0x194 0x3FC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14                                   0x194 0x3FC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10                      0x194 0x3FC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SIM_M_HADDR29                                0x194 0x3FC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3                                0x198 0x400 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3                                0x198 0x400 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11                            0x198 0x400 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15                                   0x198 0x400 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11                      0x198 0x400 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SIM_M_HADDR30                                0x198 0x400 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4                                0x19C 0x404 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK                                 0x19C 0x404 0x510 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK                                 0x19C 0x404 0x51C 0x2 0x1
+#define MX8MM_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12                            0x19C 0x404 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16                                   0x19C 0x404 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12                      0x19C 0x404 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SIM_M_HADDR31                                0x19C 0x404 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5                                0x1A0 0x408 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0                                0x1A0 0x408 0x514 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0                                0x1A0 0x408 0x000 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13                            0x1A0 0x408 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17                                   0x1A0 0x408 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13                      0x1A0 0x408 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SIM_M_HBURST0                                0x1A0 0x408 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6                                0x1A4 0x40C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC                                 0x1A4 0x40C 0x518 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC                                 0x1A4 0x40C 0x520 0x2 0x1
+#define MX8MM_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14                            0x1A4 0x40C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18                                   0x1A4 0x40C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14                      0x1A4 0x40C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SIM_M_HBURST1                                0x1A4 0x40C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7                                0x1A8 0x410 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SAI6_MCLK                                    0x1A8 0x410 0x530 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD7_PDM_CLK                                      0x1A8 0x410 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15                            0x1A8 0x410 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19                                   0x1A8 0x410 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15                      0x1A8 0x410 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SIM_M_HBURST2                                0x1A8 0x410 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK                                    0x1AC 0x414 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI5_MCLK                                    0x1AC 0x414 0x52C 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK                                 0x1AC 0x414 0x4C8 0x2 0x2
+#define MX8MM_IOMUXC_SAI1_MCLK_PDM_CLK                                      0x1AC 0x414 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20                                   0x1AC 0x414 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                 0x1B0 0x418 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                 0x1B0 0x418 0x4F4 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX                                  0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX                                  0x1B4 0x41C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                0x1B8 0x420 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B                              0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B                              0x1B8 0x420 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23                                   0x1B8 0x420 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2                                 0x1B8 0x420 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                 0x1BC 0x424 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                0x1BC 0x424 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B                              0x1BC 0x424 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B                              0x1BC 0x424 0x4F0 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24                                   0x1BC 0x424 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE                                 0x1BC 0x424 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                  0x1C0 0x428 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                 0x1C0 0x428 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25                                    0x1C0 0x428 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT                               0x1C0 0x428 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26                                   0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_TPSMP_CLK                                    0x1C4 0x42C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK                                    0x1C8 0x430 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_SAI5_MCLK                                    0x1C8 0x430 0x52C 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27                                   0x1C8 0x430 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR                              0x1C8 0x430 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                 0x1CC 0x434 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                0x1CC 0x434 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                 0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28                                   0x1CC 0x434 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0                                0x1CC 0x434 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK                                      0x1D0 0x438 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                               0x1D0 0x438 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                               0x1D4 0x43C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                0x1D8 0x440 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x4Fc 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                 0x1D8 0x440 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                  0x1DC 0x444 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4Fc 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                 0x1E0 0x448 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                 0x1E0 0x448 0x4E0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1                                     0x1E0 0x448 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_TPSMP_HDATA3                                  0x1E0 0x448 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK                                    0x1E4 0x44C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT                                     0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_SAI5_MCLK                                    0x1E4 0x44C 0x52C 0x2 0x3
+#define MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2                                    0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_TPSMP_HDATA4                                 0x1E4 0x44C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT                                    0x1E8 0x450 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT                                      0x1E8 0x450 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3                                     0x1E8 0x450 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_TPSMP_HDATA5                                  0x1E8 0x450 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN                                     0x1EC 0x454 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT                                      0x1EC 0x454 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4                                     0x1EC 0x454 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_TPSMP_HDATA6                                  0x1EC 0x454 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                           0x1F0 0x458 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                 0x1F0 0x458 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                0x1F0 0x458 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7                             0x1F0 0x458 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                0x1F4 0x45C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                               0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                               0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                  0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8                               0x1F4 0x45C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                0x1F8 0x460 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                               0x1F8 0x460 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                               0x1F8 0x460 0x504 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                  0x1F8 0x460 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9                               0x1F8 0x460 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                0x1FC 0x464 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                            0x1FC 0x464 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                            0x1FC 0x464 0x500 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                  0x1FC 0x464 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10                              0x1FC 0x464 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                  0x200 0x468 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                             0x200 0x468 0x500 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                             0x200 0x468 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                   0x200 0x468 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11                               0x200 0x468 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                0x204 0x46C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                               0x204 0x46C 0x50C 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                               0x204 0x46C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                 0x204 0x46C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12                              0x204 0x46C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                0x208 0x470 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                               0x208 0x470 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                               0x208 0x470 0x50C 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                 0x208 0x470 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13                              0x208 0x470 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                0x20C 0x474 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                            0x20C 0x474 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                            0x20C 0x474 0x508 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                 0x20C 0x474 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14                              0x20C 0x474 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                  0x210 0x478 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                             0x210 0x478 0x508 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                             0x210 0x478 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                  0x210 0x478 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15                               0x210 0x478 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL                                      0x214 0x47C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_ENET1_MDC                                     0x214 0x47C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14                                    0x214 0x47C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_TPSMP_HDATA16                                 0x214 0x47C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA                                      0x218 0x480 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_ENET1_MDIO                                    0x218 0x480 0x4C0 0x1 0x2
+#define MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15                                    0x218 0x480 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_TPSMP_HDATA17                                 0x218 0x480 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL                                      0x21C 0x484 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                          0x21C 0x484 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16                                    0x21C 0x484 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_TPSMP_HDATA18                                 0x21C 0x484 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA                                      0x220 0x488 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                         0x220 0x488 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17                                    0x220 0x488 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_TPSMP_HDATA19                                 0x220 0x488 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL                                      0x224 0x48C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_PWM4_OUT                                      0x224 0x48C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_GPT2_CLK                                      0x224 0x48C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18                                    0x224 0x48C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_TPSMP_HDATA20                                 0x224 0x48C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA                                      0x228 0x490 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_PWM3_OUT                                      0x228 0x490 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_GPT3_CLK                                      0x228 0x490 0x000 0x2 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19                                    0x228 0x490 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_TPSMP_HDATA21                                 0x228 0x490 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL                                      0x22C 0x494 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_PWM2_OUT                                      0x22C 0x494 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B                                0x22C 0x494 0x524 0x12 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20                                    0x22C 0x494 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_TPSMP_HDATA22                                 0x22C 0x494 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA                                      0x230 0x498 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_PWM1_OUT                                      0x230 0x498 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B                                0x230 0x498 0x528 0x2 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21                                    0x230 0x498 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_TPSMP_HDATA23                                 0x230 0x498 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX                                 0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_RXD_UART1_DTE_TX                                 0x234 0x49C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK                                  0x234 0x49C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX                                 0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MM_IOMUXC_UART2_RXD_UART2_DTE_TX                                 0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO                                  0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24                                   0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART2_RXD_TPSMP_HDATA26                                0x23C 0x4A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX                                 0x240 0x4A8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART2_TXD_UART2_DTE_RX                                 0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MM_IOMUXC_UART2_TXD_ECSPI3_SS0                                   0x240 0x4A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25                                   0x240 0x4A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART2_TXD_TPSMP_HDATA27                                0x240 0x4A8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX                                 0x244 0x4AC 0x504 0x0 0x2
+#define MX8MM_IOMUXC_UART3_RXD_UART3_DTE_TX                                 0x244 0x4AC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                              0x244 0x4AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                              0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26                                   0x244 0x4AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART3_RXD_TPSMP_HDATA28                                0x244 0x4AC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX                                 0x248 0x4B0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART3_TXD_UART3_DTE_RX                                 0x248 0x4B0 0x504 0x0 0x3
+#define MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                              0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                              0x248 0x4B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27                                   0x248 0x4B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART3_TXD_TPSMP_HDATA29                                0x248 0x4B0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX                                 0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MM_IOMUXC_UART4_RXD_UART4_DTE_TX                                 0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                              0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                              0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MM_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B                               0x24C 0x4B4 0x524 0x2 0x1
+#define MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28                                   0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART4_RXD_TPSMP_HDATA30                                0x24C 0x4B4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX                                 0x250 0x4B8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART4_TXD_UART4_DTE_RX                                 0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                              0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MM_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                              0x250 0x4B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B                               0x250 0x4B8 0x528 0x2 0x1
+#define MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29                                   0x250 0x4B8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART4_TXD_TPSMP_HDATA31                                0x250 0x4B8 0x000 0x7 0x0
+
+#endif /* __DTS_IMX8MM_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-u-boot.dtsi
new file mode 100644
index 000000000..f833d9df5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi
new file mode 100644
index 000000000..1a15d6a2a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&i2c2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c2 {
+	u-boot,dm-spl;
+};
+
+&fec1 {
+	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <1>;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@69} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@69/regulators} {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw700x.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw700x.dtsi
new file mode 100644
index 000000000..c769fadbd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw700x.dtsi
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_adc1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_adc2";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_dram";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_1p2";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_1p0";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_0p95";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p8";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+
+		fan-controller@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+
+	pmic@69 {
+		compatible = "mps,mp5416";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x69>;
+
+		regulators {
+			buck1 {
+				regulator-name = "vdd_0p95";
+				regulator-min-microvolt = <805000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-max-microamp = <2500000>;
+				regulator-boot-on;
+			};
+
+			buck2 {
+				regulator-name = "vdd_soc";
+				regulator-min-microvolt = <805000>;
+				regulator-max-microvolt = <900000>;
+				regulator-max-microamp = <1000000>;
+				regulator-boot-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <805000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-max-microamp = <2200000>;
+				regulator-boot-on;
+			};
+
+			buck4 {
+				regulator-name = "vdd_1p8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-max-microamp = <500000>;
+				regulator-boot-on;
+			};
+
+			ldo1 {
+				regulator-name = "nvcc_snvs_1p8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-max-microamp = <300000>;
+				regulator-boot-on;
+			};
+
+			ldo2 {
+				regulator-name = "vdd_snvs_0p8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+			};
+
+			ldo3 {
+				regulator-name = "vdd_0p95";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+			};
+
+			ldo4 {
+				regulator-name = "vdd_1p8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x19
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi
new file mode 100644
index 000000000..f5d52c2fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+#include "imx8mm-venice-gw700x-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx-0x.dts b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx-0x.dts
new file mode 100644
index 000000000..3f88c4ad5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw71xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW71xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw71xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx.dtsi
new file mode 100644
index 000000000..905b68a3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw71xx.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x40000041 /* DIO2 */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIO2 */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x41
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx-0x-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx-0x-u-boot.dtsi
new file mode 100644
index 000000000..f5d52c2fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx-0x-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+#include "imx8mm-venice-gw700x-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx-0x.dts b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx-0x.dts
new file mode 100644
index 000000000..641be3af9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw72xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW72xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx.dtsi
new file mode 100644
index 000000000..b7c91bdc2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw72xx.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000104 /* RS485_TERM */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x40000104 /* RS485 */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x40000104 /* RS485_HALF */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x41
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx-0x-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx-0x-u-boot.dtsi
new file mode 100644
index 000000000..f5d52c2fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx-0x-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+#include "imx8mm-venice-gw700x-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx-0x.dts b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx-0x.dts
new file mode 100644
index 000000000..6905437ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw73xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW73xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx.dtsi
new file mode 100644
index 000000000..d2ffd62a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-gw73xx.dtsi
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
+	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000104 /* RS485_TERM */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x40000104 /* RS485 */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x40000104 /* RS485_HALF */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x41
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x140
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-venice-u-boot.dtsi
new file mode 100644
index 000000000..42b2903f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice-u-boot.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&i2c2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c2 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-venice.dts b/roms/u-boot/arch/arm/dts/imx8mm-venice.dts
new file mode 100644
index 000000000..54505a03c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-venice.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice i.MX8MM board";
+	compatible = "gw,imx8mm-venice", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
new file mode 100644
index 000000000..67c31c49b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic/regulators} {
+	u-boot,dm-spl;
+};
+
+&uart1 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm-verdin.dts b/roms/u-boot/arch/arm/dts/imx8mm-verdin.dts
new file mode 100644
index 000000000..fb0756d6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm-verdin.dts
@@ -0,0 +1,1013 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini Quad/DualLite";
+	compatible = "toradex,verdin-imx8mm", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom_module;
+		eeprom1 = &eeprom_carrier_board;
+		eeprom2 = &eeprom_display_adapter;
+	};
+
+	/* fixed clock dedicated to SPI CAN controller */
+	clk20m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+
+	reg_ethphy: regulator-ethphy {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		off-on-delay = <500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "V3.3_ETH";
+		startup-delay-us = <200000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB1_EN */
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB2_EN */
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		regulator-name = "V3.3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <2000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		regulator-name = "V3.3_WI-FI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <2000>;
+	};
+};
+
+&A53_0 {
+	arm-supply = <&buck2_reg>;
+};
+
+&clk {
+	assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>, <&clk IMX8MM_AUDIO_PLL2>;
+	assigned-clock-rates = <786432000>, <722534400>;
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev20: spidev@0 {
+		compatible = "toradex,evalspi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		status = "okay";
+	};
+};
+
+/* On-module CAN controller 1 & 2 */
+&ecspi3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>,
+		   <&gpio1 5 GPIO_ACTIVE_LOW>;
+	/* This property is required, even if marked as obsolete in the doku */
+	fsl,spi-num-chipselects = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	can1: can@0 {
+		compatible = "microchip,mcp2517fd";
+		clocks = <&clk20m>;
+		gpio-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		microchip,clock-allways-on;
+		microchip,clock-out-div = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can1_int>;
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+	};
+
+	can2: can@1 {
+		compatible = "microchip,mcp2517fd";
+		clocks = <&clk20m>;
+		gpio-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2_int>;
+		reg = <1>;
+		spi-max-frequency = <2000000>;
+	};
+};
+
+&fec1 {
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_ethphy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&gpio4 {
+	/*
+	 * The SE050 security element may be driven via I2C from user space.
+	 * The element itself is enabled here as it has no kernel driver.
+	 */
+	se050_ena {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		line-name = "SE050_ENABLE";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_se050_ena>;
+	};
+};
+
+/* On-module I2C */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* Assembled on V1.1 HW and later */
+	pmic {
+		reg = <0x25>;
+		u-boot,dm-spl;
+		compatible = "nxp,pca9450a";
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			u-boot,dm-spl;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9450,pmic-buck2-uses-i2c-dvs;
+			/* Run/Standby voltage */
+			pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>;
+
+			buck1_reg: regulator@0 {
+				reg = <0>;
+				regulator-compatible = "buck1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2_reg: regulator@1 {
+				reg = <1>;
+				regulator-compatible = "buck2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck3_reg: regulator@2 {
+				reg = <2>;
+				regulator-compatible = "buck3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: regulator@3 {
+				reg = <3>;
+				regulator-compatible = "buck4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: regulator@4 {
+				reg = <4>;
+				regulator-compatible = "buck5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: regulator@5 {
+				reg = <5>;
+				regulator-compatible = "buck6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: regulator@6 {
+				reg = <6>;
+				regulator-compatible = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: regulator@7 {
+				reg = <7>;
+				regulator-compatible = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: regulator@8 {
+				reg = <8>;
+				regulator-compatible = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: regulator@9 {
+				reg = <9>;
+				regulator-compatible = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: regulator@10 {
+				reg = <10>;
+				regulator-compatible = "ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+		};
+	};
+
+	/* Epson RX8130 real time clock on carrier board */
+	rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	eeprom_module: eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	clock-frequency = <10000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI N/A */
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	/* Audio Codec */
+	wm8904_1a: codec@1a {
+		compatible = "wlf,wm8904";
+		#sound-dai-cells = <0>;
+		clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		reg = <0x1a>;
+	};
+
+	gpio_expander_21: gpio-expander@21 {
+		compatible = "nxp,pcal6416";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x21>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+		status = "okay";
+	};
+
+	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
+	eeprom_display_adapter: eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	/* EEPROM on carrier board */
+	eeprom_carrier_board: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
+		pagesize = <16>;
+		reg = <0x57>;
+	};
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_1>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_2>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_3>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+/* Verdin UART_3, Console/Debug UART */
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+/*
+ * resource allocated to M4 by default, must not be accessed from A-35 or you
+ * get an OOPS
+ */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	dr_mode = "otg";
+	picophy,dc-vol-level-adjust = <7>;
+	picophy,pre-emp-curr-control = <3>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	dr_mode = "host";
+	picophy,dc-vol-level-adjust = <7>;
+	picophy,pre-emp-curr-control = <3>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pm-ignore-notify;
+	status = "okay";
+	/* TODO Strobe */
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+/* On-module Wi-Fi */
+&usdhc3 {
+	bus-width = <4>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dsi_bkl_en>, <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio5>,
+		    <&pinctrl_gpio6>, <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>,
+		    <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hpd>;
+
+	pinctrl_can1_int: can1intgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x1c4
+		>;
+	};
+
+	pinctrl_can2_int: can2intgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x1c4
+		>;
+	};
+
+	pinctrl_ctrl_force_off_moci: ctrlforceoffgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x1c4		/* SODIMM 250 */
+		>;
+	};
+
+	pinctrl_dsi_bkl_en: dsi_bkl_en {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3	0x1c4		/* SODIMM 21 */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x1c4		/* SODIMM 198 */
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x4		/* SODIMM 200 */
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x4		/* SODIMM 196 */
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x1c4		/* SODIMM 202 */
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x1c4
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK	0x4
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI	0x4
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO	0x1c4
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25	0x1c4
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c4
+		>;
+	};
+
+	pinctrl_fec1_sleep: fec1-sleepgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21		0x1f
+			MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20		0x1f
+			MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19		0x1f
+			MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18		0x1f
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23		0x1f
+			MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x184
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x1c2		/* SODIMM 52 */
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82		/* SODIMM 54 */
+			MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B	0x82		/* SODIMM 64 */
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82		/* SODIMM 56 */
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82		/* SODIMM 58 */
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82		/* SODIMM 60 */
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82		/* SODIMM 62 */
+			MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS	0x82		/* SODIMM 66 */
+		>;
+	};
+
+	/* (MEZ_)GPIO_1 shared with (MEZ_)DSI_1_INT# on Verdin Development Board */
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4	0x184		/* SODIMM 206 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x184		/* SODIMM 208 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26	0x184		/* SODIMM 210 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27	0x184		/* SODIMM 212 */
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x184		/* SODIMM 216 */
+		>;
+	};
+
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x184		/* SODIMM 218 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x184		/* SODIMM 220 */
+		>;
+	};
+
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x184		/* SODIMM 222 */
+		>;
+	};
+
+	pinctrl_gpio_hog1: gpiohog1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20	0x1c4		/* SODIMM 88 */
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1		0x1c4		/* SODIMM 90 */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x1c4		/* SODIMM 92 */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x1c4		/* SODIMM 94 */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x1c4		/* SODIMM 96 */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x1c4		/* SODIMM 100 */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x1c4		/* SODIMM 102 */
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11	0x1c4		/* SODIMM 104 */
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x1c4		/* SODIMM 106 */
+			MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13	0x1c4		/* SODIMM 108 */
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x1c4		/* SODIMM 112 */
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15	0x1c4		/* SODIMM 114 */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16	0x1c4		/* SODIMM 116 */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18	0x1c4		/* SODIMM 118 */
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10	0x1c4		/* SODIMM 120 */
+		>;
+	};
+
+	pinctrl_gpio_hog2: gpiohog2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x1c4		/* SODIMM 91 */
+		>;
+	};
+
+	pinctrl_gpio_hog3: gpiohog3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x1c4		/* SODIMM 157 */
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4		/* SODIMM 187 */
+		>;
+	};
+
+	/* (MEZ_)DSI_1_INT# shared with (MEZ_)GPIO_1 on Verdin Development Board */
+	pinctrl_gpio_hpd: gpiohpdgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15	0x184		/* SODIMM 17 */
+		>;
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c6
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c6
+		>;
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c6	/* SODIMM 55 */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c6	/* SODIMM 53 */
+		>;
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c6	/* SODIMM 95 */
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c6	/* SODIMM 93 */
+		>;
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c6	/* SODIMM 14 */
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c6	/* SODIMM 12 */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19	0x6		/* SODIMM 244 */
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x6		/* PMIC_EN_PCIe_CLK */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_pwm_1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x6		/* SODIMM 19 */
+		>;
+	};
+
+	pinctrl_pwm_2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT		0x6		/* SODIMM 15 */
+		>;
+	};
+
+	pinctrl_pwm_3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT		0x6		/* SODIMM 16 */
+		>;
+	};
+
+	pinctrl_reg_eth: regethgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_WP_GPIO2_IO20		0x184
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1engrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x184		/* SODIMM 155 */
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2engrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x184		/* SODIMM 185 */
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6		/* SODIMM 38 */
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6		/* SODIMM 36 */
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6		/* SODIMM 30 */
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6		/* SODIMM 34 */
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6		/* SODIMM 32 */
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0	0xd6		/* SODIMM 48 */
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6		/* SODIMM 44 */
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6		/* SODIMM 42 */
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6		/* SODIMM 46 */
+		>;
+	};
+
+	pinctrl_se050_ena: se050enagrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19	0x184
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX	0x1c4		/* SODIMM 147 */
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX	0x1c4		/* SODIMM 149 */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x1c4		/* SODIMM 133 */
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x1c4		/* SODIMM 135 */
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX	0x1c4		/* SODIMM 131 */
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX	0x1c4		/* SODIMM 129 */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x1c4	/* SODIMM 141 */
+			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x1c4	/* SODIMM 139 */
+			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x1c4	/* SODIMM 137 */
+			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x1c4	/* SODIMM 143 */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x1c4		/* SODIMM 151 */
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x1c4		/* SODIMM 153 */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4		/* SODIMM 84 */
+		>;
+	};
+
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x184		/* SODIMM 76 */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190		/* SODIMM 78 */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0		/* SODIMM 74 */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0		/* SODIMM 80 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0		/* SODIMM 82 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0		/* SODIMM 70 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0		/* SODIMM 72 */
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+
+	pinctrl_wifi_ctrl: wifictrlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x1c4		/* WIFI_WKUP_BT */
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9	0x1c4		/* WIFI_W_WKUP_HOST */
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x1c4		/* WIFI_WKUP_WLAN */
+		>;
+	};
+
+	pinctrl_wifi_i2s: wifii2sgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC	0xd6
+			MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x184		/* PMIC_EN_WIFI */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mm.dtsi b/roms/u-boot/arch/arm/dts/imx8mm.dtsi
new file mode 100644
index 000000000..b142b8073
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mm.dtsi
@@ -0,0 +1,1100 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mm-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xe>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0xc>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usbphynop1: usbphynop1 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30000000 0x30000000 0x400000>;
+
+			sai1: sai@30010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+					 <&clk IMX8MM_CLK_SAI1_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai2: sai@30020000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30020000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+					<&clk IMX8MM_CLK_SAI2_ROOT>,
+					<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+					 <&clk IMX8MM_CLK_SAI3_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30050000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+					 <&clk IMX8MM_CLK_SAI5_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30060000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30060000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+					 <&clk IMX8MM_CLK_SAI6_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			micfil: audio-controller@30080000 {
+				compatible = "fsl,imx8mm-micfil";
+				reg = <0x30080000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+					 <&clk IMX8MM_CLK_PDM_ROOT>,
+					 <&clk IMX8MM_AUDIO_PLL1_OUT>,
+					 <&clk IMX8MM_AUDIO_PLL2_OUT>,
+					 <&clk IMX8MM_CLK_EXT3>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&sdma2 24 25 0x80000000>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			spdif1: spdif@30090000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x30090000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+					 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+					 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+					 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+					 <&clk IMX8MM_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+				#thermal-sensor-cells = <0>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MM_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma3: dma-controller@302b0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
+				 <&clk IMX8MM_CLK_SDMA3_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mm-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx8mm-anatop", "syscon";
+				reg = <0x30360000 0x10000>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mm-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
+						<&clk IMX8MM_CLK_A53_CORE>,
+						<&clk IMX8MM_CLK_NOC>,
+						<&clk IMX8MM_CLK_AUDIO_AHB>,
+						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MM_SYS_PLL3>,
+						<&clk IMX8MM_VIDEO_PLL1>,
+						<&clk IMX8MM_AUDIO_PLL1>,
+						<&clk IMX8MM_AUDIO_PLL2>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+							 <&clk IMX8MM_ARM_PLL_OUT>,
+							 <&clk IMX8MM_SYS_PLL3_OUT>,
+							 <&clk IMX8MM_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>, <0>, <0>,
+							<400000000>,
+							<400000000>,
+							<750000000>,
+							<594000000>,
+							<393216000>,
+							<361267200>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mm-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MM_CLK_USB_BUS>;
+					};
+
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_gpumix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+						         <&clk IMX8MM_CLK_GPU_AHB>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+						         <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+						         <&clk IMX8MM_CLK_GPU2D_ROOT>,
+						         <&clk IMX8MM_CLK_GPU3D_ROOT>;
+						resets = <&src IMX8MQ_RESET_GPU_RESET>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					dispmix_pd: power-domain@10 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
+							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+							 <&clk IMX8MM_CLK_DISP_APB_ROOT>;
+					};
+
+					mipi_pd: power-domain@11 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
+						power-domains = <&dispmix_pd>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30400000 0x30400000 0x400000>;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
+					<&clk IMX8MM_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
+					 <&clk IMX8MM_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
+					 <&clk IMX8MM_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
+					 <&clk IMX8MM_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x8000000 0x8000000 0x10000000>;
+
+			ecspi1: spi@30820000 {
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+					 <&clk IMX8MM_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+					 <&clk IMX8MM_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+					 <&clk IMX8MM_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AHB>,
+					 <&clk IMX8MM_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
+					 <&clk IMX8MM_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
+					 <&clk IMX8MM_CLK_QSPI_ROOT>;
+				clock-names = "fspi", "fspi_en";
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MM_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
+					 <&clk IMX8MM_CLK_ENET1_ROOT>,
+					 <&clk IMX8MM_CLK_ENET_TIMER>,
+					 <&clk IMX8MM_CLK_ENET_REF>,
+					 <&clk IMX8MM_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
+						  <&clk IMX8MM_CLK_ENET_TIMER>,
+						  <&clk IMX8MM_CLK_ENET_REF>,
+						  <&clk IMX8MM_CLK_ENET_TIMER>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+							 <&clk IMX8MM_SYS_PLL2_100M>,
+							 <&clk IMX8MM_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				status = "disabled";
+			};
+
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x32c00000 0x32c00000 0x400000>;
+
+			usbotg1: usb@32e40000 {
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+				reg = <0x32e40000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+				phys = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_otg1>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@32e40200 {
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e40200 0x200>;
+			};
+
+			usbotg2: usb@32e50000 {
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+				reg = <0x32e50000 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+				phys = <&usbphynop2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				power-domains = <&pgc_otg2>;
+				status = "disabled";
+			};
+
+			usbmisc2: usbmisc@32e50200 {
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e50200 0x200>;
+			};
+
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000{
+			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
+				 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>, /* GIC Dist */
+			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+				 <&clk IMX8MM_DRAM_PLL>,
+				 <&clk IMX8MM_CLK_DRAM_ALT>,
+				 <&clk IMX8MM_CLK_DRAM_APB>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-beacon-baseboard.dtsi b/roms/u-boot/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
new file mode 100644
index 000000000..376ca8ff7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led3>;
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "microchip,at25160bn", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <32>;
+		size = <2048>;
+		address-width = <16>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pca6416_0: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+		clock-names = "xclk";
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+};
+
+&easrc {
+	fsl,asrc-rate  = <48000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	dr_mode="otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
+		>;
+	};
+
+	pinctrl_reg_usb_otg: reg-otggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
+			MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
new file mode 100644
index 000000000..bbc64a281
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} {
+	u-boot,dm-spl;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&pca6416_0 {
+	compatible = "ti,tca6416";
+};
+
+&pca6416_1 {
+	compatible = "ti,tca6416";
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-beacon-kit.dts b/roms/u-boot/arch/arm/dts/imx8mn-beacon-kit.dts
new file mode 100644
index 000000000..1392ce025
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-beacon-kit.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-beacon-som.dtsi"
+#include "imx8mn-beacon-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit";
+	compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-beacon-som.dtsi b/roms/u-boot/arch/arm/dts/imx8mn-beacon-som.dtsi
new file mode 100644
index 000000000..de2cd0e32
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-beacon-som.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+		spi0 = &flexspi;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/* DDR controller is running LPDDR at 800MHz which requires 0.95V */
+&a53_opp_table {
+	opp-1200000000 {
+		opp-microvolt = <950000>;
+	};
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-800M {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&buck6_reg>;
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		max-speed = <4000000>;
+		clock-names = "extclk";
+	};
+};
+
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
+			MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7	0x19
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x19
+			MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9		0x111
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
new file mode 100644
index 000000000..1d3844437
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
+
+&binman {
+	 u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "ddr4_imem_1d_201810.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "ddr4_dmem_1d_201810.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "ddr4_imem_2d_201810.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "ddr4_dmem_2d_201810.bin";
+			size = <0x4000>;
+		};
+	};
+
+
+	flash {
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x912000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x960000>;
+					entry = <0x960000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-ddr4-evk.dts b/roms/u-boot/arch/arm/dts/imx8mn-ddr4-evk.dts
new file mode 100644
index 000000000..7dfee715a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-ddr4-evk.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+
+/ {
+	model = "NXP i.MX8MNano DDR4 EVK board";
+	compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600M {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mn-evk-u-boot.dtsi
new file mode 100644
index 000000000..3db46d4cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-evk-u-boot.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include "imx8mn-ddr4-evk-u-boot.dtsi"
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25/regulators} {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&binman {
+	 u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "lpddr4_pmu_train_1d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "lpddr4_pmu_train_1d_dmem.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "lpddr4_pmu_train_2d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "lpddr4_pmu_train_2d_dmem.bin";
+			size = <0x4000>;
+		};
+	};
+
+
+	flash {
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x912000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x960000>;
+					entry = <0x960000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-evk.dts b/roms/u-boot/arch/arm/dts/imx8mn-evk.dts
new file mode 100644
index 000000000..cd11fb28f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-evk.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NXP i.MX8MNano EVK board";
+	compatible = "fsl,imx8mn-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	pmic: pca9450@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1{
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-evk.dtsi b/roms/u-boot/arch/arm/dts/imx8mn-evk.dtsi
new file mode 100644
index 000000000..76d042a4c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-evk.dtsi
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x166
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mn-pinfunc.h b/roms/u-boot/arch/arm/dts/imx8mn-pinfunc.h
new file mode 100644
index 000000000..faf1e69e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn-pinfunc.h
@@ -0,0 +1,646 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef __DTS_IMX8MN_PINFUNC_H
+#define __DTS_IMX8MN_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2                        0x020 0x25C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL                                       0x020 0x25C 0x55C 0x1 0x3
+#define MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3                        0x024 0x260 0x000 0x0 0x0
+#define MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA                                       0x024 0x260 0x56C 0x1 0x3
+#define MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0                                      0x028 0x290 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT             0x028 0x290 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                             0x028 0x290 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                          0x028 0x290 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1                                      0x02C 0x294 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT                                       0x02C 0x294 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                             0x02C 0x294 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                          0x02C 0x294 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_GPIO1_IO2                                      0x030 0x298 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                   0x030 0x298 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                                 0x030 0x298 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3                                      0x034 0x29C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                                 0x034 0x29C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                               0x034 0x29C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                                 0x034 0x29C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4                                      0x038 0x2A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                                 0x038 0x2A0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                               0x038 0x2A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                              0x038 0x2A0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5                                      0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_M4_NMI                                         0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                        0x03C 0x2A4 0x4BC 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                          0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6                                      0x040 0x2A8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_ENET1_MDC                                      0x040 0x2A8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                    0x040 0x2A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                          0x040 0x2A8 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7                                      0x044 0x2AC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_ENET1_MDIO                                     0x044 0x2AC 0x4C0 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_USDHC1_WP                                      0x044 0x2AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                          0x044 0x2AC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8                                      0x048 0x2B0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                           0x048 0x2B0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_PWM1_OUT                                       0x048 0x2B0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                                 0x048 0x2B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                              0x048 0x2B0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9                                      0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                          0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_PWM2_OUT                                       0x04C 0x2B4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_USDHC3_RESET_B                                 0x04C 0x2B4 0x000 0x4 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                               0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                              0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10                                     0x050 0x2B8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                    0x050 0x2B8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_PWM3_OUT                                       0x050 0x2B8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11                                     0x054 0x2BC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_PWM2_OUT                                       0x054 0x2BC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_USDHC3_VSELECT                                 0x054 0x2BC 0x000 0x4 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                        0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                              0x054 0x2BC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12                                     0x058 0x2C0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                   0x058 0x2C0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                               0x058 0x2C0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                              0x058 0x2C0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13                                     0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                    0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_PWM2_OUT                                       0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                              0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14                                     0x060 0x2C8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_USDHC3_CD_B                                    0x060 0x2C8 0x598 0x4 0x2
+#define MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT                                       0x060 0x2C8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                             0x060 0x2C8 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15                                     0x064 0x2CC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_USDHC3_WP                                      0x064 0x2CC 0x5B8 0x4 0x2
+#define MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT                                       0x064 0x2CC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                             0x064 0x2CC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_ENET_MDC_ENET1_MDC                                        0x068 0x2D0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_MDC_SAI6_TX_DATA0                                    0x068 0x2D0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_MDC_PDM_BIT_STREAM3                                  0x068 0x2D0 0x540 0x3 0x1
+#define MX8MN_IOMUXC_ENET_MDC_SPDIF1_OUT                                       0x068 0x2D0 0x000 0x4 0x0
+#define MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16                                       0x068 0x2D0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_MDC_USDHC3_STROBE                                    0x068 0x2D0 0x59C 0x6 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO                                      0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_SAI6_TX_SYNC                                    0x06C 0x2D4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_MDIO_PDM_BIT_STREAM2                                 0x06C 0x2D4 0x53C 0x3 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_SPDIF1_IN                                       0x06C 0x2D4 0x5CC 0x4 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17                                      0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_MDIO_USDHC3_DATA5                                    0x06C 0x2D4 0x550 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                                  0x070 0x2D8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD3_SAI6_TX_BCLK                                     0x070 0x2D8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD3_PDM_BIT_STREAM1                                  0x070 0x2D8 0x538 0x3 0x1
+#define MX8MN_IOMUXC_ENET_TD3_SPDIF1_EXT_CLK                                   0x070 0x2D8 0x568 0x4 0x1
+#define MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18                                       0x070 0x2D8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD3_USDHC3_DATA6                                     0x070 0x2D8 0x584 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                                  0x074 0x2DC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK                                     0x074 0x2DC 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TD2_CCMSRCGPCMIX_ENET_REF_CLK_ROOT                   0x074 0x2DC 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TD2_SAI6_RX_DATA0                                    0x074 0x2DC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD2_PDM_BIT_STREAM3                                  0x074 0x2DC 0x540 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19                                       0x074 0x2DC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD2_USDHC3_DATA7                                     0x074 0x2DC 0x54C 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                                  0x078 0x2E0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD1_SAI6_RX_SYNC                                     0x078 0x2E0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD1_PDM_BIT_STREAM2                                  0x078 0x2E0 0x53C 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20                                       0x078 0x2E0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD1_USDHC3_CD_B                                      0x078 0x2E0 0x598 0x6 0x3
+#define MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                                  0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD0_SAI6_RX_BCLK                                     0x07C 0x2E4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD0_PDM_BIT_STREAM1                                  0x07C 0x2E4 0x538 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21                                       0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD0_USDHC3_WP                                        0x07C 0x2E4 0x5B8 0x6 0x3
+#define MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                            0x080 0x2E8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_SAI6_MCLK                                     0x080 0x2E8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                    0x080 0x2E8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_USDHC3_DATA0                                  0x080 0x2E8 0x5B4 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                                  0x084 0x2EC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER                                      0x084 0x2EC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TXC_SAI7_TX_DATA0                                    0x084 0x2EC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23                                       0x084 0x2EC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TXC_USDHC3_DATA1                                     0x084 0x2EC 0x5B0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                            0x088 0x2F0 0x574 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_SAI7_TX_SYNC                                  0x088 0x2F0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_PDM_BIT_STREAM3                               0x088 0x2F0 0x540 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                    0x088 0x2F0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_USDHC3_DATA2                                  0x088 0x2F0 0x5E4 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                                  0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER                                      0x08C 0x2F4 0x5C8 0x1 0x0
+#define MX8MN_IOMUXC_ENET_RXC_SAI7_TX_BCLK                                     0x08C 0x2F4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RXC_PDM_BIT_STREAM2                                  0x08C 0x2F4 0x53C 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25                                       0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RXC_USDHC3_DATA3                                     0x08C 0x2F4 0x5E0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                                  0x090 0x2F8 0x57C 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD0_SAI7_RX_DATA0                                    0x090 0x2F8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD0_PDM_BIT_STREAM1                                  0x090 0x2F8 0x538 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26                                       0x090 0x2F8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD0_USDHC3_DATA4                                     0x090 0x2F8 0x558 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                                  0x094 0x2FC 0x554 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD1_SAI7_RX_SYNC                                     0x094 0x2FC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD1_PDM_BIT_STREAM0                                  0x094 0x2FC 0x534 0x3 0x1
+#define MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27                                       0x094 0x2FC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD1_USDHC3_RESET_B                                   0x094 0x2FC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                                  0x098 0x300 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD2_SAI7_RX_BCLK                                     0x098 0x300 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD2_PDM_CLK                                          0x098 0x300 0x000 0x3 0x0
+#define MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28                                       0x098 0x300 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD2_USDHC3_CLK                                       0x098 0x300 0x5A0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                                  0x09C 0x304 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD3_SAI7_MCLK                                        0x09C 0x304 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD3_SPDIF1_IN                                        0x09C 0x304 0x5CC 0x3 0x5
+#define MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29                                       0x09C 0x304 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD3_USDHC3_CMD                                       0x09C 0x304 0x5DC 0x6 0x1
+#define MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK                                        0x0A0 0x308 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_CLK_ENET1_MDC                                         0x0A0 0x308 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_CLK_UART1_DCE_TX                                      0x0A0 0x308 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_CLK_UART1_DTE_RX                                      0x0A0 0x308 0x4F4 0x4 0x4
+#define MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0                                         0x0A0 0x308 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD                                        0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_CMD_ENET1_MDIO                                        0x0A4 0x30C 0x4C0 0x1 0x3
+#define MX8MN_IOMUXC_SD1_CMD_UART1_DCE_RX                                      0x0A4 0x30C 0x4F4 0x4 0x5
+#define MX8MN_IOMUXC_SD1_CMD_UART1_DTE_TX                                      0x0A4 0x30C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1                                         0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0                                    0x0A8 0x310 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_ENET1_RGMII_TD1                                 0x0A8 0x310 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_UART1_DCE_RTS_B                                 0x0A8 0x310 0x4F0 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA0_UART1_DTE_CTS_B                                 0x0A8 0x310 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_GPIO2_IO2                                       0x0A8 0x310 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1                                    0x0AC 0x314 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_ENET1_RGMII_TD0                                 0x0AC 0x314 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_UART1_DCE_CTS_B                                 0x0AC 0x314 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_UART1_DTE_RTS_B                                 0x0AC 0x314 0x4F0 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3                                       0x0AC 0x314 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2                                    0x0B0 0x318 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_ENET1_RGMII_RD0                                 0x0B0 0x318 0x57C 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA2_UART2_DCE_TX                                    0x0B0 0x318 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_UART2_DTE_RX                                    0x0B0 0x318 0x4FC 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA2_GPIO2_IO4                                       0x0B0 0x318 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3                                    0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_ENET1_RGMII_RD1                                 0x0B4 0x31C 0x554 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA3_UART2_DCE_RX                                    0x0B4 0x31C 0x4FC 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA3_UART2_DTE_TX                                    0x0B4 0x31C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_GPIO2_IO5                                       0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4                                    0x0B8 0x320 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_ENET1_RGMII_TX_CTL                              0x0B8 0x320 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_I2C1_SCL                                        0x0B8 0x320 0x55C 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA4_UART2_DCE_RTS_B                                 0x0B8 0x320 0x4F8 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA4_UART2_DTE_CTS_B                                 0x0B8 0x320 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6                                       0x0B8 0x320 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5                                    0x0BC 0x324 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_ENET1_TX_ER                                     0x0BC 0x324 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_I2C1_SDA                                        0x0BC 0x324 0x56C 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA5_UART2_DCE_CTS_B                                 0x0BC 0x324 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_UART2_DTE_RTS_B                                 0x0BC 0x324 0x4F8 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7                                       0x0BC 0x324 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6                                    0x0C0 0x328 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_ENET1_RGMII_RX_CTL                              0x0C0 0x328 0x574 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA6_I2C2_SCL                                        0x0C0 0x328 0x5D0 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA6_UART3_DCE_TX                                    0x0C0 0x328 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_UART3_DTE_RX                                    0x0C0 0x328 0x504 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8                                       0x0C0 0x328 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7                                    0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_ENET1_RX_ER                                     0x0C4 0x32C 0x5C8 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA7_I2C2_SDA                                        0x0C4 0x32C 0x560 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA7_UART3_DCE_RX                                    0x0C4 0x32C 0x504 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA7_UART3_DTE_TX                                    0x0C4 0x32C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9                                       0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                                0x0C8 0x330 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_ENET1_TX_CLK                                  0x0C8 0x330 0x5A4 0x1 0x1
+#define MX8MN_IOMUXC_SD1_RESET_B_CCMSRCGPCMIX_ENET_REF_CLK_ROOT                0x0C8 0x330 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_I2C3_SCL                                      0x0C8 0x330 0x588 0x3 0x1
+#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DCE_RTS_B                               0x0C8 0x330 0x500 0x4 0x2
+#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DTE_CTS_B                               0x0C8 0x330 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10                                    0x0C8 0x330 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE                                  0x0CC 0x334 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_I2C3_SDA                                       0x0CC 0x334 0x5BC 0x3 0x1
+#define MX8MN_IOMUXC_SD1_STROBE_UART3_DCE_CTS_B                                0x0CC 0x334 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_UART3_DTE_RTS_B                                0x0CC 0x334 0x500 0x4 0x3
+#define MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11                                     0x0CC 0x334 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B                                      0x0D0 0x338 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12                                       0x0D0 0x338 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_CCMSRCGPCMIX_TESTER_ACK                          0x0D0 0x338 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK                                        0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CLK_SAI5_RX_SYNC                                      0x0D4 0x33C 0x4E4 0x1 0x1
+#define MX8MN_IOMUXC_SD2_CLK_ECSPI2_SCLK                                       0x0D4 0x33C 0x580 0x2 0x1
+#define MX8MN_IOMUXC_SD2_CLK_UART4_DCE_RX                                      0x0D4 0x33C 0x50C 0x3 0x4
+#define MX8MN_IOMUXC_SD2_CLK_UART4_DTE_TX                                      0x0D4 0x33C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_CLK_SAI5_MCLK                                         0x0D4 0x33C 0x594 0x4 0x1
+#define MX8MN_IOMUXC_SD2_CLK_GPIO2_IO13                                        0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                             0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD                                        0x0D8 0x340 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CMD_SAI5_RX_BCLK                                      0x0D8 0x340 0x4D0 0x1 0x1
+#define MX8MN_IOMUXC_SD2_CMD_ECSPI2_MOSI                                       0x0D8 0x340 0x590 0x2 0x1
+#define MX8MN_IOMUXC_SD2_CMD_UART4_DCE_TX                                      0x0D8 0x340 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_CMD_UART4_DTE_RX                                      0x0D8 0x340 0x50C 0x3 0x5
+#define MX8MN_IOMUXC_SD2_CMD_PDM_CLK                                           0x0D8 0x340 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD2_CMD_GPIO2_IO14                                        0x0D8 0x340 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                             0x0D8 0x340 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0                                    0x0DC 0x344 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_SAI5_RX_DATA0                                   0x0DC 0x344 0x4D4 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA0_I2C4_SDA                                        0x0DC 0x344 0x58C 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA0_UART2_DCE_RX                                    0x0DC 0x344 0x4FC 0x3 0x6
+#define MX8MN_IOMUXC_SD2_DATA0_UART2_DTE_TX                                    0x0DC 0x344 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_PDM_BIT_STREAM0                                 0x0DC 0x344 0x534 0x4 0x2
+#define MX8MN_IOMUXC_SD2_DATA0_GPIO2_IO15                                      0x0DC 0x344 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                           0x0DC 0x344 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1                                    0x0E0 0x348 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_SAI5_TX_SYNC                                    0x0E0 0x348 0x4EC 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA1_I2C4_SCL                                        0x0E0 0x348 0x5D4 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA1_UART2_DCE_TX                                    0x0E0 0x348 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_UART2_DTE_RX                                    0x0E0 0x348 0x4FC 0x3 0x7
+#define MX8MN_IOMUXC_SD2_DATA1_PDM_BIT_STREAM1                                 0x0E0 0x348 0x538 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA1_GPIO2_IO16                                      0x0E0 0x348 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                               0x0E0 0x348 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2                                    0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_SAI5_TX_BCLK                                    0x0E4 0x34C 0x4E8 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA2_ECSPI2_SS0                                      0x0E4 0x34C 0x570 0x2 0x2
+#define MX8MN_IOMUXC_SD2_DATA2_SPDIF1_OUT                                      0x0E4 0x34C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_PDM_BIT_STREAM2                                 0x0E4 0x34C 0x53C 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA2_GPIO2_IO17                                      0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                               0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3                                    0x0E8 0x350 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_SAI5_TX_DATA0                                   0x0E8 0x350 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_ECSPI2_MISO                                     0x0E8 0x350 0x578 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA3_SPDIF1_IN                                       0x0E8 0x350 0x5CC 0x3 0x2
+#define MX8MN_IOMUXC_SD2_DATA3_PDM_BIT_STREAM3                                 0x0E8 0x350 0x540 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA3_GPIO2_IO18                                      0x0E8 0x350 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                        0x0E8 0x350 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                                0x0EC 0x354 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19                                    0x0EC 0x354 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                     0x0EC 0x354 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_WP_USDHC2_WP                                          0x0F0 0x358 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_WP_GPIO2_IO20                                         0x0F0 0x358 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_WP_CORESIGHT_EVENTI                                   0x0F0 0x358 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE                                      0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK                                      0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_ALE_PDM_BIT_STREAM0                                  0x0F4 0x35C 0x534 0x3 0x3
+#define MX8MN_IOMUXC_NAND_ALE_UART3_DCE_RX                                     0x0F4 0x35C 0x504 0x4 0x6
+#define MX8MN_IOMUXC_NAND_ALE_UART3_DTE_TX                                     0x0F4 0x35C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_ALE_GPIO3_IO0                                        0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_ALE_CORESIGHT_TRACE_CLK                              0x0F4 0x35C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                                  0x0F8 0x360 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                   0x0F8 0x360 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_PDM_BIT_STREAM1                                0x0F8 0x360 0x538 0x3 0x5
+#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DCE_TX                                   0x0F8 0x360 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DTE_RX                                   0x0F8 0x360 0x504 0x4 0x7
+#define MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1                                      0x0F8 0x360 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_CORESIGHT_TRACE_CTL                            0x0F8 0x360 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                                  0x0FC 0x364 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                   0x0FC 0x364 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE                                  0x0FC 0x364 0x59C 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_PDM_BIT_STREAM0                                0x0FC 0x364 0x534 0x3 0x4
+#define MX8MN_IOMUXC_NAND_CE1_B_I2C4_SCL                                       0x0FC 0x364 0x5D4 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE1_B_GPIO3_IO2                                      0x0FC 0x364 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_CORESIGHT_TRACE0                               0x0FC 0x364 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                                  0x100 0x368 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                   0x100 0x368 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5                                   0x100 0x368 0x550 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_PDM_BIT_STREAM1                                0x100 0x368 0x538 0x3 0x6
+#define MX8MN_IOMUXC_NAND_CE2_B_I2C4_SDA                                       0x100 0x368 0x58C 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE2_B_GPIO3_IO3                                      0x100 0x368 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_CORESIGHT_TRACE1                               0x100 0x368 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                                  0x104 0x36C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                   0x104 0x36C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6                                   0x104 0x36C 0x584 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_PDM_BIT_STREAM2                                0x104 0x36C 0x53C 0x3 0x5
+#define MX8MN_IOMUXC_NAND_CE3_B_I2C3_SDA                                       0x104 0x36C 0x5BC 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE3_B_GPIO3_IO4                                      0x104 0x36C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_CORESIGHT_TRACE2                               0x104 0x36C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE                                      0x108 0x370 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CLE_QSPI_B_SCLK                                      0x108 0x370 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7                                     0x108 0x370 0x54C 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CLE_GPIO3_IO5                                        0x108 0x370 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CLE_CORESIGHT_TRACE3                                 0x108 0x370 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00                                0x10C 0x374 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0                                  0x10C 0x374 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_PDM_BIT_STREAM2                               0x10C 0x374 0x53C 0x3 0x6
+#define MX8MN_IOMUXC_NAND_DATA00_UART4_DCE_RX                                  0x10C 0x374 0x50C 0x4 0x6
+#define MX8MN_IOMUXC_NAND_DATA00_UART4_DTE_TX                                  0x10C 0x374 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_GPIO3_IO6                                     0x10C 0x374 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_CORESIGHT_TRACE4                              0x10C 0x374 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01                                0x110 0x378 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1                                  0x110 0x378 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_PDM_BIT_STREAM3                               0x110 0x378 0x540 0x3 0x5
+#define MX8MN_IOMUXC_NAND_DATA01_UART4_DCE_TX                                  0x110 0x378 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_UART4_DTE_RX                                  0x110 0x378 0x50C 0x4 0x7
+#define MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7                                     0x110 0x378 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_CORESIGHT_TRACE5                              0x110 0x378 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02                                0x114 0x37C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2                                  0x114 0x37C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_USDHC3_CD_B                                   0x114 0x37C 0x598 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_I2C4_SDA                                      0x114 0x37C 0x58C 0x4 0x3
+#define MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8                                     0x114 0x37C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_CORESIGHT_TRACE6                              0x114 0x37C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03                                0x118 0x380 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3                                  0x118 0x380 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_USDHC3_WP                                     0x118 0x380 0x5B8 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_GPIO3_IO9                                     0x118 0x380 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_CORESIGHT_TRACE7                              0x118 0x380 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04                                0x11C 0x384 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_QSPI_B_DATA0                                  0x11C 0x384 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0                                  0x11C 0x384 0x5B4 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_GPIO3_IO10                                    0x11C 0x384 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_CORESIGHT_TRACE8                              0x11C 0x384 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05                                0x120 0x388 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_QSPI_B_DATA1                                  0x120 0x388 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1                                  0x120 0x388 0x5B0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_GPIO3_IO11                                    0x120 0x388 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_CORESIGHT_TRACE9                              0x120 0x388 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06                                0x124 0x38C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_QSPI_B_DATA2                                  0x124 0x38C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2                                  0x124 0x38C 0x5E4 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_GPIO3_IO12                                    0x124 0x38C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_CORESIGHT_TRACE10                             0x124 0x38C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07                                0x128 0x390 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_QSPI_B_DATA3                                  0x128 0x390 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3                                  0x128 0x390 0x5E0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_GPIO3_IO13                                    0x128 0x390 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_CORESIGHT_TRACE11                             0x128 0x390 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DQS_RAWNAND_DQS                                      0x12C 0x394 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DQS_QSPI_A_DQS                                       0x12C 0x394 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DQS_PDM_CLK                                          0x12C 0x394 0x000 0x3 0x0
+#define MX8MN_IOMUXC_NAND_DQS_I2C3_SCL                                         0x12C 0x394 0x588 0x4 0x2
+#define MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14                                       0x12C 0x394 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DQS_CORESIGHT_TRACE12                                0x12C 0x394 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                    0x130 0x398 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_QSPI_B_DQS                                      0x130 0x398 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4                                    0x130 0x398 0x558 0x2 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_PDM_BIT_STREAM1                                 0x130 0x398 0x538 0x3 0x7
+#define MX8MN_IOMUXC_NAND_RE_B_GPIO3_IO15                                      0x130 0x398 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_CORESIGHT_TRACE13                               0x130 0x398 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B                              0x134 0x39C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B                               0x134 0x39C 0x000 0x2 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_PDM_BIT_STREAM3                              0x134 0x39C 0x540 0x3 0x6
+#define MX8MN_IOMUXC_NAND_READY_B_I2C3_SCL                                     0x134 0x39C 0x588 0x4 0x3
+#define MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16                                   0x134 0x39C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_CORESIGHT_TRACE14                            0x134 0x39C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                    0x138 0x3A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK                                      0x138 0x3A0 0x5A0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_I2C3_SDA                                        0x138 0x3A0 0x5BC 0x4 0x3
+#define MX8MN_IOMUXC_NAND_WE_B_GPIO3_IO17                                      0x138 0x3A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_CORESIGHT_TRACE15                               0x138 0x3A0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                    0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD                                      0x13C 0x3A4 0x5DC 0x2 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_I2C4_SDA                                        0x13C 0x3A4 0x58C 0x4 0x4
+#define MX8MN_IOMUXC_NAND_WP_B_GPIO3_IO18                                      0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_CORESIGHT_EVENTO                                0x13C 0x3A4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                    0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXFS_GPIO3_IO19                                      0x140 0x3A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                     0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_PDM_CLK                                          0x144 0x3AC 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20                                       0x144 0x3AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                   0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0                                 0x148 0x3B0 0x534 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21                                      0x148 0x3B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                   0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                    0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1                                 0x14C 0x3B4 0x538 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22                                      0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                   0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                    0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2                                 0x150 0x3B8 0x53C 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23                                      0x150 0x3B8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                   0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                   0x154 0x3BC 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3                                 0x154 0x3BC 0x540 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24                                      0x154 0x3BC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK                                       0x158 0x3C0 0x594 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25                                      0x158 0x3C0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                    0x1B0 0x418 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                    0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_DATA1                                   0x1B0 0x418 0x000 0x2 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_DATA1                                   0x1B0 0x418 0x5AC 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                    0x1B0 0x418 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                    0x1B0 0x418 0x4F4 0x4 0x2
+#define MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21                                      0x1B0 0x418 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_PDM_BIT_STREAM2                                 0x1B0 0x418 0x53C 0x6 0x7
+#define MX8MN_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                     0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                     0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_RXC_UART1_DCE_RX                                     0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MN_IOMUXC_SAI2_RXC_UART1_DTE_TX                                     0x1B4 0x41C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22                                       0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_PDM_BIT_STREAM1                                  0x1B4 0x41C 0x538 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                   0x1B8 0x420 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                   0x1B8 0x420 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_TX_DATA1                                   0x1B8 0x420 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B                                 0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B                                 0x1B8 0x420 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23                                      0x1B8 0x420 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_PDM_BIT_STREAM3                                 0x1B8 0x420 0x540 0x6 0x7
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                    0x1BC 0x424 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                   0x1BC 0x424 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_DATA1                                   0x1BC 0x424 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B                                 0x1BC 0x424 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B                                 0x1BC 0x424 0x4F0 0x4 0x3
+#define MX8MN_IOMUXC_SAI2_TXFS_GPIO4_IO24                                      0x1BC 0x424 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_PDM_BIT_STREAM2                                 0x1BC 0x424 0x53C 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                     0x1C0 0x428 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                    0x1C0 0x428 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25                                       0x1C0 0x428 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_PDM_BIT_STREAM1                                  0x1C0 0x428 0x538 0x6 0x9
+#define MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                   0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                   0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26                                      0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_CCMSRCGPCMIX_BOOT_MODE4                         0x1C4 0x42C 0x540 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI2_MCLK                                       0x1C8 0x430 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI5_MCLK                                       0x1C8 0x430 0x594 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27                                      0x1C8 0x430 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI3_MCLK                                       0x1C8 0x430 0x5C0 0x6 0x1
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                    0x1CC 0x434 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                   0x1CC 0x434 0x5F0 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                    0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_DATA1                                   0x1CC 0x434 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_SPDIF1_IN                                       0x1CC 0x434 0x5CC 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28                                      0x1CC 0x434 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_PDM_BIT_STREAM0                                 0x1CC 0x434 0x534 0x6 0x5
+#define MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                     0x1D0 0x438 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_GPT1_CLK                                         0x1D0 0x438 0x5E8 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                     0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_SAI2_RX_DATA1                                    0x1D0 0x438 0x5AC 0x3 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                                  0x1D0 0x438 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                                  0x1D0 0x438 0x4F8 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29                                       0x1D0 0x438 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_PDM_CLK                                          0x1D0 0x438 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                    0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                    0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                    0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXD_SAI3_TX_DATA1                                    0x1D4 0x43C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                                  0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                                  0x1D4 0x43C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_GPIO4_IO30                                       0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_PDM_BIT_STREAM1                                  0x1D4 0x43C 0x538 0x6 0x10
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                    0x1D8 0x440 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                   0x1D8 0x440 0x5EC 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                   0x1D8 0x440 0x4D8 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_DATA1                                   0x1D8 0x440 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                    0x1D8 0x440 0x4FC 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                    0x1D8 0x440 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_GPIO4_IO31                                      0x1D8 0x440 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_PDM_BIT_STREAM3                                 0x1D8 0x440 0x540 0x6 0x9
+#define MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                     0x1DC 0x444 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                    0x1DC 0x444 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                    0x1DC 0x444 0x4DC 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXC_SAI2_TX_DATA1                                    0x1DC 0x444 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX                                     0x1DC 0x444 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_UART2_DTE_RX                                     0x1DC 0x444 0x4FC 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_TXC_GPIO5_IO0                                        0x1DC 0x444 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_PDM_BIT_STREAM2                                  0x1DC 0x444 0x53C 0x6 0x9
+#define MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                    0x1E0 0x448 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                    0x1E0 0x448 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                    0x1E0 0x448 0x4E0 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXD_SPDIF1_EXT_CLK                                   0x1E0 0x448 0x568 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1                                        0x1E0 0x448 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_CCMSRCGPCMIX_BOOT_MODE5                          0x1E0 0x448 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK                                       0x1E4 0x44C 0x5C0 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_PWM4_OUT                                        0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SAI5_MCLK                                       0x1E4 0x44C 0x594 0x2 0x3
+#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_OUT                                      0x1E4 0x44C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2                                       0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_IN                                       0x1E4 0x44C 0x5CC 0x6 0x4
+#define MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT                                       0x1E8 0x450 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_TX_PWM3_OUT                                         0x1E8 0x450 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3                                        0x1E8 0x450 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN                                        0x1EC 0x454 0x5CC 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_PWM2_OUT                                         0x1EC 0x454 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4                                        0x1EC 0x454 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                              0x1F0 0x458 0x568 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                    0x1F0 0x458 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                   0x1F0 0x458 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                   0x1F4 0x45C 0x5D8 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                                  0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                                  0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_I2C1_SCL                                      0x1F4 0x45C 0x55C 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_SCLK_SAI5_RX_SYNC                                  0x1F4 0x45C 0x4DC 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                     0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                   0x1F8 0x460 0x5A8 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                                  0x1F8 0x460 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                                  0x1F8 0x460 0x504 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI1_MOSI_I2C1_SDA                                      0x1F8 0x460 0x56C 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_MOSI_SAI5_RX_BCLK                                  0x1F8 0x460 0x4D0 0x3 0x3
+#define MX8MN_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                     0x1F8 0x460 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                   0x1FC 0x464 0x5C4 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                               0x1FC 0x464 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                               0x1FC 0x464 0x500 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_I2C2_SCL                                      0x1FC 0x464 0x5D0 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_MISO_SAI5_RX_DATA0                                 0x1FC 0x464 0x4D4 0x3 0x3
+#define MX8MN_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                     0x1FC 0x464 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                     0x200 0x468 0x564 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                                0x200 0x468 0x500 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                                0x200 0x468 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_I2C2_SDA                                       0x200 0x468 0x560 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_RX_DATA1                                  0x200 0x468 0x4D8 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_TX_SYNC                                   0x200 0x468 0x4EC 0x4 0x3
+#define MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                      0x200 0x468 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                   0x204 0x46C 0x580 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                                  0x204 0x46C 0x50C 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                                  0x204 0x46C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_I2C3_SCL                                      0x204 0x46C 0x588 0x2 0x4
+#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_RX_DATA2                                 0x204 0x46C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_TX_BCLK                                  0x204 0x46C 0x4E8 0x4 0x3
+#define MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                    0x204 0x46C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                   0x208 0x470 0x590 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                                  0x208 0x470 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                                  0x208 0x470 0x50C 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI2_MOSI_I2C3_SDA                                      0x208 0x470 0x5BC 0x2 0x4
+#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_RX_DATA3                                 0x208 0x470 0x4E0 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_TX_DATA0                                 0x208 0x470 0x000 0x4 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                    0x208 0x470 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                   0x20C 0x474 0x578 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                               0x20C 0x474 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                               0x20C 0x474 0x508 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_I2C4_SCL                                      0x20C 0x474 0x5D4 0x2 0x3
+#define MX8MN_IOMUXC_ECSPI2_MISO_SAI5_MCLK                                     0x20C 0x474 0x594 0x3 0x4
+#define MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                    0x20C 0x474 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                     0x210 0x478 0x570 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                                0x210 0x478 0x508 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                                0x210 0x478 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_I2C4_SDA                                       0x210 0x478 0x58C 0x2 0x5
+#define MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                     0x210 0x478 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL                                         0x214 0x47C 0x55C 0x0 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_ENET1_MDC                                        0x214 0x47C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_ECSPI1_SCLK                                      0x214 0x47C 0x5D8 0x3 0x1
+#define MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14                                       0x214 0x47C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA                                         0x218 0x480 0x56C 0x0 0x0
+#define MX8MN_IOMUXC_I2C1_SDA_ENET1_MDIO                                       0x218 0x480 0x4C0 0x1 0x2
+#define MX8MN_IOMUXC_I2C1_SDA_ECSPI1_MOSI                                      0x218 0x480 0x5A8 0x3 0x1
+#define MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15                                       0x218 0x480 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL                                         0x21C 0x484 0x5D0 0x0 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                             0x21C 0x484 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_USDHC3_CD_B                                      0x21C 0x484 0x598 0x2 0x1
+#define MX8MN_IOMUXC_I2C2_SCL_ECSPI1_MISO                                      0x21C 0x484 0x5C4 0x3 0x1
+#define MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16                                       0x21C 0x484 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA                                         0x220 0x488 0x560 0x0 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                            0x220 0x488 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_USDHC3_WP                                        0x220 0x488 0x5B8 0x2 0x1
+#define MX8MN_IOMUXC_I2C2_SDA_ECSPI1_SS0                                       0x220 0x488 0x564 0x3 0x1
+#define MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17                                       0x220 0x488 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL                                         0x224 0x48C 0x588 0x0 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_PWM4_OUT                                         0x224 0x48C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_GPT2_CLK                                         0x224 0x48C 0x000 0x2 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_ECSPI2_SCLK                                      0x224 0x48C 0x580 0x3 0x2
+#define MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18                                       0x224 0x48C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA                                         0x228 0x490 0x5BC 0x0 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_PWM3_OUT                                         0x228 0x490 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_GPT3_CLK                                         0x228 0x490 0x000 0x2 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_ECSPI2_MOSI                                      0x228 0x490 0x590 0x3 0x2
+#define MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19                                       0x228 0x490 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL                                         0x22C 0x494 0x5D4 0x0 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_PWM2_OUT                                         0x22C 0x494 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_ECSPI2_MISO                                      0x22C 0x494 0x578 0x3 0x2
+#define MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20                                       0x22C 0x494 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA                                         0x230 0x498 0x58C 0x0 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_PWM1_OUT                                         0x230 0x498 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_ECSPI2_SS0                                       0x230 0x498 0x570 0x3 0x1
+#define MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21                                       0x230 0x498 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX                                    0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MN_IOMUXC_UART1_RXD_UART1_DTE_TX                                    0x234 0x49C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART1_RXD_ECSPI3_SCLK                                     0x234 0x49C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART1_RXD_GPIO5_IO22                                      0x234 0x49C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX                                    0x238 0x4A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART1_TXD_UART1_DTE_RX                                    0x238 0x4A0 0x4F4 0x0 0x1
+#define MX8MN_IOMUXC_UART1_TXD_ECSPI3_MOSI                                     0x238 0x4A0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23                                      0x238 0x4A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX                                    0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MN_IOMUXC_UART2_RXD_UART2_DTE_TX                                    0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART2_RXD_ECSPI3_MISO                                     0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART2_RXD_GPT1_COMPARE3                                   0x23C 0x4A4 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24                                      0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX                                    0x240 0x4A8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART2_TXD_UART2_DTE_RX                                    0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MN_IOMUXC_UART2_TXD_ECSPI3_SS0                                      0x240 0x4A8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART2_TXD_GPT1_COMPARE2                                   0x240 0x4A8 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25                                      0x240 0x4A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX                                    0x244 0x4AC 0x504 0x0 0x2
+#define MX8MN_IOMUXC_UART3_RXD_UART3_DTE_TX                                    0x244 0x4AC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                                 0x244 0x4AC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                                 0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MN_IOMUXC_UART3_RXD_USDHC3_RESET_B                                  0x244 0x4AC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_UART3_RXD_GPT1_CAPTURE2                                   0x244 0x4AC 0x5EC 0x3 0x1
+#define MX8MN_IOMUXC_UART3_RXD_GPIO5_IO26                                      0x244 0x4AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX                                    0x248 0x4B0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART3_TXD_UART3_DTE_RX                                    0x248 0x4B0 0x504 0x0 0x3
+#define MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                                 0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MN_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                                 0x248 0x4B0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART3_TXD_USDHC3_VSELECT                                  0x248 0x4B0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_UART3_TXD_GPT1_CLK                                        0x248 0x4B0 0x5E8 0x3 0x1
+#define MX8MN_IOMUXC_UART3_TXD_GPIO5_IO27                                      0x248 0x4B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX                                    0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MN_IOMUXC_UART4_RXD_UART4_DTE_TX                                    0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                                 0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                                 0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MN_IOMUXC_UART4_RXD_GPT1_COMPARE1                                   0x24C 0x4B4 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART4_RXD_GPIO5_IO28                                      0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX                                    0x250 0x4B8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART4_TXD_UART4_DTE_RX                                    0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MN_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                                 0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MN_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                                 0x250 0x4B8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART4_TXD_GPT1_CAPTURE1                                   0x250 0x4B8 0x5F0 0x3 0x1
+#define MX8MN_IOMUXC_UART4_TXD_GPIO5_IO29                                      0x250 0x4B8 0x000 0x5 0x0
+
+#endif /* __DTS_IMX8MN_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx8mn.dtsi b/roms/u-boot/arch/arm/dts/imx8mn.dtsi
new file mode 100644
index 000000000..edcb415b5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mn.dtsi
@@ -0,0 +1,1091 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mn-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xb00>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0x300>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x100>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "fsl,imx8mn-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		nvmem-cells = <&imx8mn_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba: spba-bus@30000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30000000 0x100000>;
+				ranges;
+
+				sai2: sai@30020000 {
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30020000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
+						<&clk IMX8MN_CLK_DUMMY>,
+						<&clk IMX8MN_CLK_SAI2_ROOT>,
+						<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@30030000 {
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30030000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI3_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai5: sai@30050000 {
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30050000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI5_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					fsl,shared-interrupt;
+					fsl,dataline = <0 0xf 0xf>;
+					status = "disabled";
+				};
+
+				sai6: sai@30060000 {
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30060000  0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI6_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				micfil: audio-controller@30080000 {
+					compatible = "fsl,imx8mm-micfil";
+					reg = <0x30080000 0x10000>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_PDM_IPG>,
+						 <&clk IMX8MN_CLK_PDM_ROOT>,
+						 <&clk IMX8MN_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MN_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MN_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
+				spdif1: spdif@30090000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x30090000 0x10000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */
+						 <&clk IMX8MN_CLK_24M>, /* rxtx0 */
+						 <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */
+						 <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */
+						 <&clk IMX8MN_CLK_DUMMY>; /* spba */
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai7: sai@300b0000 {
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x300b0000 0x10000>;
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI7_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				easrc: easrc@300c0000 {
+					compatible = "fsl,imx8mn-easrc";
+					reg = <0x300c0000 0x10000>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+					clock-names = "mem";
+					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+					dma-names = "ctx0_rx", "ctx0_tx",
+						    "ctx1_rx", "ctx1_tx",
+						    "ctx2_rx", "ctx2_tx",
+						    "ctx3_rx", "ctx3_tx";
+					firmware-name = "imx/easrc/easrc-imx8mn.bin";
+					fsl,asrc-rate  = <8000>;
+					fsl,asrc-format = <2>;
+					status = "disabled";
+				};
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 21 108 11>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
+				#thermal-sensor-cells = <0>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma3: dma-controller@302b0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
+				 <&clk IMX8MN_CLK_SDMA3_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MN_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mn-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				imx8mn_uid: unique-id@410 {
+					reg = <0x4 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				fec_mac_address: mac-address@90 {
+					reg = <0x90 6>;
+				};
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
+					     "syscon";
+				reg = <0x30360000 0x10000>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mn-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>,
+						<&clk IMX8MN_CLK_A53_CORE>,
+						<&clk IMX8MN_CLK_NOC>,
+						<&clk IMX8MN_CLK_AUDIO_AHB>,
+						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MN_SYS_PLL3>,
+						<&clk IMX8MN_AUDIO_PLL1>,
+						<&clk IMX8MN_AUDIO_PLL2>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
+							 <&clk IMX8MN_ARM_PLL_OUT>,
+							 <&clk IMX8MN_SYS_PLL3_OUT>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>, <0>, <0>,
+							<400000000>,
+							<400000000>,
+							<600000000>,
+							<393216000>,
+							<361267200>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mn-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MN_CLK_USB_BUS>;
+					};
+
+					pgc_otg1: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_gpumix: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
+							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_AHB>;
+						resets = <&src IMX8MQ_RESET_GPU_RESET>;
+					};
+
+					dispmix_pd: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+							 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+							 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+					};
+
+					mipi_pd: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+						power-domains = <&dispmix_pd>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM1_ROOT>,
+					<&clk IMX8MN_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM2_ROOT>,
+					 <&clk IMX8MN_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM3_ROOT>,
+					 <&clk IMX8MN_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM4_ROOT>,
+					 <&clk IMX8MN_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ecspi1: spi@30820000 {
+				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MN_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MN_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MN_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
+					 <&clk IMX8MN_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
+					 <&clk IMX8MN_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
+					 <&clk IMX8MN_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_AHB>,
+					 <&clk IMX8MN_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x1000 0x1000>;
+					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x2000 0x1000>;
+					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x3000 0x1000>;
+					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART4_ROOT>,
+					 <&clk IMX8MN_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
+					 <&clk IMX8MN_CLK_QSPI_ROOT>;
+				clock-names = "fspi", "fspi_en";
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MN_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ENET1_ROOT>,
+					 <&clk IMX8MN_CLK_ENET1_ROOT>,
+					 <&clk IMX8MN_CLK_ENET_TIMER>,
+					 <&clk IMX8MN_CLK_ENET_REF>,
+					 <&clk IMX8MN_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
+						  <&clk IMX8MN_CLK_ENET_TIMER>,
+						  <&clk IMX8MN_CLK_ENET_REF>,
+						  <&clk IMX8MN_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_SYS_PLL2_100M>,
+							 <&clk IMX8MN_SYS_PLL2_125M>,
+							 <&clk IMX8MN_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&fec_mac_address>;
+				nvmem-cell-names = "mac-address";
+				nvmem_macaddr_swap;
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbotg1: usb@32e40000 {
+				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
+				reg = <0x32e40000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
+				phys = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_otg1>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@32e40200 {
+				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e40200 0x200>;
+			};
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000 {
+			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clk IMX8MN_CLK_NAND_ROOT>,
+				 <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
+				 <&clk IMX8MN_DRAM_PLL>,
+				 <&clk IMX8MN_CLK_DRAM_ALT>,
+				 <&clk IMX8MN_CLK_DRAM_APB>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	usbphynop1: usbphynop1 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mp-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mp-evk-u-boot.dtsi
new file mode 100644
index 000000000..4162f41cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mp-evk-u-boot.dtsi
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&osc_32k {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&i2c2 {
+	u-boot,dm-spl;
+};
+
+&i2c3 {
+	u-boot,dm-spl;
+};
+
+&i2c4 {
+	u-boot,dm-spl;
+};
+
+&i2c5 {
+	u-boot,dm-spl;
+};
+
+&i2c6 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
+
+&fec {
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <15>;
+	phy-reset-post-delay = <100>;
+};
+
+&binman {
+	 u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "lpddr4_pmu_train_1d_imem_202006.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "lpddr4_pmu_train_1d_dmem_202006.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "lpddr4_pmu_train_2d_imem_202006.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "lpddr4_pmu_train_2d_dmem_202006.bin";
+			size = <0x4000>;
+		};
+	};
+
+
+       flash {
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x920000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x970000>;
+					entry = <0x970000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mp-evk.dts b/roms/u-boot/arch/arm/dts/imx8mp-evk.dts
new file mode 100644
index 000000000..b10dce876
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mp-evk.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus EVK board";
+	compatible = "fsl,imx8mp-evk", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "disabled";/* can2 pin conflict with pdm */
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX          0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX          0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: flexcan1reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154   /* CAN1_STBY */
+		>;
+	};
+
+	pinctrl_flexcan2_reg: flexcan2reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154   /* CAN2_STBY */
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
new file mode 100644
index 000000000..20e7f63ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&osc_32k {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_pins {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&pmic {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts b/roms/u-boot/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
new file mode 100644
index 000000000..0e1a6d953
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Pollux i.MX8MP";
+	compatible = "phytec,imx8mp-phyboard-pollux-rdk",
+		     "phytec,imx8mp-phycore-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* debug console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e3
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mp-phycore-som.dtsi b/roms/u-boot/arch/arm/dts/imx8mp-phycore-som.dtsi
new file mode 100644
index 000000000..44a8c2337
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mp-phycore-som.dtsi
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX8MP";
+	compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+/* ethernet 1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		reg = <0x25>;
+		compatible = "nxp,pca9450c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-compatible = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-compatible = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-compatible = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-compatible = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-compatible = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-compatible = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-compatible = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-compatible = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-compatible = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-compatible = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		trickle-resistor-ohms = <3000>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x11
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x141
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mp-pinfunc.h b/roms/u-boot/arch/arm/dts/imx8mp-pinfunc.h
new file mode 100644
index 000000000..0fef06647
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mp-pinfunc.h
@@ -0,0 +1,799 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __DTS_IMX8MP_PINFUNC_H
+#define __DTS_IMX8MP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00                          0x014 0x274 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT           0x014 0x274 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0                       0x014 0x274 0x5D4 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1                        0x014 0x274 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01                          0x018 0x278 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT                            0x018 0x278 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0                  0x018 0x278 0x5DC 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2                        0x018 0x278 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02                          0x01C 0x27C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B                        0x01C 0x27C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__ISP_FLASH_TRIG_0                    0x01C 0x27C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_ANY                      0x01C 0x27C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__SJC_DE_B                            0x01C 0x27C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03                          0x020 0x280 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT                      0x020 0x280 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__ISP_PRELIGHT_TRIG_0                 0x020 0x280 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__SDMA1_EXT_EVENT00                   0x020 0x280 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04                          0x024 0x284 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT                      0x024 0x284 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__ISP_SHUTTER_OPEN_0                  0x024 0x284 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__SDMA1_EXT_EVENT01                   0x024 0x284 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05                          0x028 0x288 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__M7_NMI                              0x028 0x288 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__ISP_FL_TRIG_1                       0x028 0x288 0x5D8 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__CCM_PMIC_READY                      0x028 0x288 0x554 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06                          0x02C 0x28C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ENET_QOS_MDC                        0x02C 0x28C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ISP_SHUTTER_TRIG_1                  0x02C 0x28C 0x5E0 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B                         0x02C 0x28C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__CCM_EXT_CLK3                        0x02C 0x28C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07                          0x030 0x290 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ENET_QOS_MDIO                       0x030 0x290 0x590 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ISP_FLASH_TRIG_1                    0x030 0x290 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP                           0x030 0x290 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__CCM_EXT_CLK4                        0x030 0x290 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08                          0x034 0x294 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN             0x034 0x294 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__PWM1_OUT                            0x034 0x294 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ISP_PRELIGHT_TRIG_1                 0x034 0x294 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN         0x034 0x294 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__USDHC2_RESET_B                      0x034 0x294 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09                          0x038 0x298 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT            0x038 0x298 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT                            0x038 0x298 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ISP_SHUTTER_OPEN_1                  0x038 0x298 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B                      0x038 0x298 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__SDMA2_EXT_EVENT00                   0x038 0x298 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10                          0x03C 0x29C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID                         0x03C 0x29C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT                            0x03C 0x29C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11                          0x040 0x2A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID                         0x040 0x2A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT                            0x040 0x2A0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USDHC3_VSELECT                      0x040 0x2A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__CCM_PMIC_READY                      0x040 0x2A0 0x554 0x5 0x1
+#define MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12                          0x044 0x2A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR                        0x044 0x2A4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__SDMA2_EXT_EVENT01                   0x044 0x2A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13                          0x048 0x2A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC                         0x048 0x2A8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__PWM2_OUT                            0x048 0x2A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                          0x04C 0x2AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR                        0x04C 0x2AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USDHC3_CD_B                         0x04C 0x2AC 0x608 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT                            0x04C 0x2AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1                           0x04C 0x2AC 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                          0x050 0x2B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC                         0x050 0x2B0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USDHC3_WP                           0x050 0x2B0 0x634 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT                            0x050 0x2B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2                           0x050 0x2B0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC                          0x054 0x2B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00               0x054 0x2B4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16                            0x054 0x2B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDC__USDHC3_STROBE                         0x054 0x2B4 0x630 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO                        0x058 0x2B8 0x590 0x0 0x1
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC                0x058 0x2B8 0x528 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_PDM_BIT_STREAM03            0x058 0x2B8 0x4CC 0x3 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17                           0x058 0x2B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__USDHC3_DATA5                         0x058 0x2B8 0x624 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3                    0x05C 0x2BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK                 0x05C 0x2BC 0x524 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_PDM_BIT_STREAM02             0x05C 0x2BC 0x4C8 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18                            0x05C 0x2BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD3__USDHC3_DATA6                          0x05C 0x2BC 0x628 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2                    0x060 0x2C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK   0x060 0x2C0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00               0x060 0x2C0 0x51C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_PDM_BIT_STREAM01             0x060 0x2C0 0x4C4 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19                            0x060 0x2C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD2__USDHC3_DATA7                          0x060 0x2C0 0x62C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1                    0x064 0x2C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC                 0x064 0x2C4 0x520 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_PDM_BIT_STREAM00             0x064 0x2C4 0x4C0 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20                            0x064 0x2C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD1__USDHC3_CD_B                           0x064 0x2C4 0x608 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0                    0x068 0x2C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK                 0x068 0x2C8 0x518 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_PDM_CLK                      0x068 0x2C8 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21                            0x068 0x2C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD0__USDHC3_WP                             0x068 0x2C8 0x634 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL              0x06C 0x2CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK                 0x06C 0x2CC 0x514 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF1_OUT                0x06C 0x2CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22                         0x06C 0x2CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__USDHC3_DATA0                       0x06C 0x2CC 0x610 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK    0x070 0x2D0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TXC__ENET_QOS_TX_ER                        0x070 0x2D0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00               0x070 0x2D0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23                            0x070 0x2D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TXC__USDHC3_DATA1                          0x070 0x2D0 0x614 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x074 0x2D4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC              0x074 0x2D4 0x540 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_PDM_BIT_STREAM03          0x074 0x2D4 0x4CC 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24                         0x074 0x2D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2                       0x074 0x2D4 0x618 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x078 0x2D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER                        0x078 0x2D8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                 0x078 0x2D8 0x53C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_PDM_BIT_STREAM02             0x078 0x2D8 0x4C8 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25                            0x078 0x2D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3                          0x078 0x2D8 0x61C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                    0x07C 0x2DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00               0x07C 0x2DC 0x534 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_PDM_BIT_STREAM01             0x07C 0x2DC 0x4C4 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26                            0x07C 0x2DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4                          0x07C 0x2DC 0x620 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                    0x080 0x2E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                 0x080 0x2E0 0x538 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_PDM_BIT_STREAM00             0x080 0x2E0 0x4C0 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27                            0x080 0x2E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B                        0x080 0x2E0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2                    0x084 0x2E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK                 0x084 0x2E4 0x530 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_PDM_CLK                      0x084 0x2E4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28                            0x084 0x2E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD2__USDHC3_CLK                            0x084 0x2E4 0x604 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3                    0x088 0x2E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SAI7_MCLK                    0x088 0x2E8 0x52C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF1_IN                    0x088 0x2E8 0x544 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29                            0x088 0x2E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD3__USDHC3_CMD                            0x088 0x2E8 0x60C 0x6 0x0
+#define MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK                             0x08C 0x2EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CLK__ENET1_MDC                              0x08C 0x2EC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CLK__I2C5_SCL                               0x08C 0x2EC 0x5C4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX                           0x08C 0x2EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DTE_RX                           0x08C 0x2EC 0x5E8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00                             0x08C 0x2EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD                             0x090 0x2F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CMD__ENET1_MDIO                             0x090 0x2F0 0x57C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CMD__I2C5_SDA                               0x090 0x2F0 0x5C8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX                           0x090 0x2F0 0x5E8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DTE_TX                           0x090 0x2F0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01                             0x090 0x2F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0                         0x094 0x2F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__ENET1_RGMII_TD1                      0x094 0x2F4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL                             0x094 0x2F4 0x5CC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DCE_RTS                        0x094 0x2F4 0x5E4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DTE_CTS                        0x094 0x2F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02                           0x094 0x2F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1                         0x098 0x2F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__ENET1_RGMII_TD0                      0x098 0x2F8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA                             0x098 0x2F8 0x5D0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS                        0x098 0x2F8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DTE_RTS                        0x098 0x2F8 0x5E4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03                           0x098 0x2F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2                         0x09C 0x2FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__ENET1_RGMII_RD0                      0x09C 0x2FC 0x580 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__I2C4_SCL                             0x09C 0x2FC 0x5BC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX                         0x09C 0x2FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DTE_RX                         0x09C 0x2FC 0x5F0 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04                           0x09C 0x2FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3                         0x0A0 0x300 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__ENET1_RGMII_RD1                      0x0A0 0x300 0x584 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__I2C4_SDA                             0x0A0 0x300 0x5C0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX                         0x0A0 0x300 0x5F0 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DTE_TX                         0x0A0 0x300 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05                           0x0A0 0x300 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4                         0x0A4 0x304 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__ENET1_RGMII_TX_CTL                   0x0A4 0x304 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL                             0x0A4 0x304 0x5A4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS                        0x0A4 0x304 0x5EC 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS                        0x0A4 0x304 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06                           0x0A4 0x304 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5                         0x0A8 0x308 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__ENET1_TX_ER                          0x0A8 0x308 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA                             0x0A8 0x308 0x5A8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS                        0x0A8 0x308 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS                        0x0A8 0x308 0x5EC 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07                           0x0A8 0x308 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6                         0x0AC 0x30C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__ENET1_RGMII_RX_CTL                   0x0AC 0x30C 0x588 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__I2C2_SCL                             0x0AC 0x30C 0x5AC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX                         0x0AC 0x30C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX                         0x0AC 0x30C 0x5F8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08                           0x0AC 0x30C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7                         0x0B0 0x310 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__ENET1_RX_ER                          0x0B0 0x310 0x58C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__I2C2_SDA                             0x0B0 0x310 0x5B0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX                         0x0B0 0x310 0x5F8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX                         0x0B0 0x310 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09                           0x0B0 0x310 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B                     0x0B4 0x314 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__ENET1_TX_CLK                       0x0B4 0x314 0x578 0x1 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL                           0x0B4 0x314 0x5B4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS                      0x0B4 0x314 0x5F4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS                      0x0B4 0x314 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10                         0x0B4 0x314 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE                       0x0B8 0x318 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA                            0x0B8 0x318 0x5B8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS                       0x0B8 0x318 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS                       0x0B8 0x318 0x5F4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11                          0x0B8 0x318 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B                           0x0BC 0x31C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12                            0x0BC 0x31C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                             0x0C0 0x320 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CLK__ECSPI2_SCLK                            0x0C0 0x320 0x568 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DCE_RX                           0x0C0 0x320 0x600 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DTE_TX                           0x0C0 0x320 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13                             0x0C0 0x320 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                             0x0C4 0x324 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CMD__ECSPI2_MOSI                            0x0C4 0x324 0x570 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DCE_TX                           0x0C4 0x324 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DTE_RX                           0x0C4 0x324 0x600 0x3 0x1
+#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_PDM_CLK                       0x0C4 0x324 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14                             0x0C4 0x324 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                         0x0C8 0x328 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA                             0x0C8 0x328 0x5C0 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX                         0x0C8 0x328 0x5F0 0x3 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX                         0x0C8 0x328 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_PDM_BIT_STREAM00            0x0C8 0x328 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15                           0x0C8 0x328 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                         0x0CC 0x32C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__I2C4_SCL                             0x0CC 0x32C 0x5BC 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DCE_TX                         0x0CC 0x32C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DTE_RX                         0x0CC 0x32C 0x5F0 0x3 0x3
+#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_PDM_BIT_STREAM01            0x0CC 0x32C 0x4C4 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16                           0x0CC 0x32C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                         0x0D0 0x330 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__ECSPI2_SS0                           0x0D0 0x330 0x574 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF1_OUT                  0x0D0 0x330 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_PDM_BIT_STREAM02            0x0D0 0x330 0x4C8 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17                           0x0D0 0x330 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                         0x0D4 0x334 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO                          0x0D4 0x334 0x56C 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF1_IN                   0x0D4 0x334 0x544 0x3 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_PDM_BIT_STREAM03            0x0D4 0x334 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18                           0x0D4 0x334 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__SRC_EARLY_RESET                      0x0D4 0x334 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B                     0x0D8 0x338 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19                         0x0D8 0x338 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__SRC_SYSTEM_RESET                   0x0D8 0x338 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_WP__USDHC2_WP                               0x0DC 0x33C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_WP__GPIO2_IO20                              0x0DC 0x33C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_WP__CORESIGHT_EVENTI                        0x0DC 0x33C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_ALE__NAND_ALE                              0x0E0 0x340 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK                        0x0E0 0x340 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK                 0x0E0 0x340 0x4E8 0x2 0x0
+#define MX8MP_IOMUXC_NAND_ALE__ISP_FL_TRIG_0                         0x0E0 0x340 0x5D4 0x3 0x1
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX                          0x0E0 0x340 0x5F8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DTE_TX                          0x0E0 0x340 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00                            0x0E0 0x340 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_ALE__CORESIGHT_TRACE_CLK                   0x0E0 0x340 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__NAND_CE0_B                          0x0E4 0x344 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B                     0x0E4 0x344 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00             0x0E4 0x344 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__ISP_SHUTTER_TRIG_0                  0x0E4 0x344 0x5DC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX                        0x0E4 0x344 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DTE_RX                        0x0E4 0x344 0x5F8 0x4 0x3
+#define MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01                          0x0E4 0x344 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__CORESIGHT_TRACE_CTL                 0x0E4 0x344 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__NAND_CE1_B                          0x0E8 0x348 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__FLEXSPI_A_SS1_B                     0x0E8 0x348 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE                       0x0E8 0x348 0x630 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE1_B__I2C4_SCL                            0x0E8 0x348 0x5BC 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02                          0x0E8 0x348 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__CORESIGHT_TRACE00                   0x0E8 0x348 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__NAND_CE2_B                          0x0EC 0x34C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__FLEXSPI_B_SS0_B                     0x0EC 0x34C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5                        0x0EC 0x34C 0x624 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE2_B__I2C4_SDA                            0x0EC 0x34C 0x5C0 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE2_B__GPIO3_IO03                          0x0EC 0x34C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__CORESIGHT_TRACE01                   0x0EC 0x34C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__NAND_CE3_B                          0x0F0 0x350 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__FLEXSPI_B_SS1_B                     0x0F0 0x350 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6                        0x0F0 0x350 0x628 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__I2C3_SDA                            0x0F0 0x350 0x5B8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__GPIO3_IO04                          0x0F0 0x350 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__CORESIGHT_TRACE02                   0x0F0 0x350 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CLE__NAND_CLE                              0x0F4 0x354 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CLE__FLEXSPI_B_SCLK                        0x0F4 0x354 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7                          0x0F4 0x354 0x62C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DCE_RX                          0x0F4 0x354 0x600 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DTE_TX                          0x0F4 0x354 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CLE__GPIO3_IO05                            0x0F4 0x354 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CLE__CORESIGHT_TRACE03                     0x0F4 0x354 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__NAND_DATA00                        0x0F8 0x358 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00                   0x0F8 0x358 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00            0x0F8 0x358 0x4E4 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__ISP_FLASH_TRIG_0                   0x0F8 0x358 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX                       0x0F8 0x358 0x600 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DTE_TX                       0x0F8 0x358 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06                         0x0F8 0x358 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__CORESIGHT_TRACE04                  0x0F8 0x358 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__NAND_DATA01                        0x0FC 0x35C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01                   0x0FC 0x35C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC              0x0FC 0x35C 0x4EC 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__ISP_PRELIGHT_TRIG_0                0x0FC 0x35C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DCE_TX                       0x0FC 0x35C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DTE_RX                       0x0FC 0x35C 0x600 0x4 0x4
+#define MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07                         0x0FC 0x35C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__CORESIGHT_TRACE05                  0x0FC 0x35C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__NAND_DATA02                        0x100 0x360 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02                   0x100 0x360 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__USDHC3_CD_B                        0x100 0x360 0x608 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS                      0x100 0x360 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DTE_RTS                      0x100 0x360 0x5FC 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__I2C4_SDA                           0x100 0x360 0x5C0 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08                         0x100 0x360 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__CORESIGHT_TRACE06                  0x100 0x360 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__NAND_DATA03                        0x104 0x364 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03                   0x104 0x364 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__USDHC3_WP                          0x104 0x364 0x634 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS                      0x104 0x364 0x5FC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DTE_CTS                      0x104 0x364 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__ISP_FL_TRIG_1                      0x104 0x364 0x5D8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09                         0x104 0x364 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__CORESIGHT_TRACE07                  0x104 0x364 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__NAND_DATA04                        0x108 0x368 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_B_DATA00                   0x108 0x368 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0                       0x108 0x368 0x610 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_A_DATA04                   0x108 0x368 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__ISP_SHUTTER_TRIG_1                 0x108 0x368 0x5E0 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10                         0x108 0x368 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__CORESIGHT_TRACE08                  0x108 0x368 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__NAND_DATA05                        0x10C 0x36C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_B_DATA01                   0x10C 0x36C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1                       0x10C 0x36C 0x614 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_A_DATA05                   0x10C 0x36C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__ISP_FLASH_TRIG_1                   0x10C 0x36C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11                         0x10C 0x36C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__CORESIGHT_TRACE09                  0x10C 0x36C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__NAND_DATA06                        0x110 0x370 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_B_DATA02                   0x110 0x370 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2                       0x110 0x370 0x618 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_A_DATA06                   0x110 0x370 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__ISP_PRELIGHT_TRIG_1                0x110 0x370 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12                         0x110 0x370 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__CORESIGHT_TRACE10                  0x110 0x370 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__NAND_DATA07                        0x114 0x374 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_B_DATA03                   0x114 0x374 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3                       0x114 0x374 0x61C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_A_DATA07                   0x114 0x374 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__ISP_SHUTTER_OPEN_1                 0x114 0x374 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13                         0x114 0x374 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__CORESIGHT_TRACE11                  0x114 0x374 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DQS__NAND_DQS                              0x118 0x378 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS                         0x118 0x378 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DQS__AUDIOMIX_SAI3_MCLK                    0x118 0x378 0x4E0 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DQS__ISP_SHUTTER_OPEN_0                    0x118 0x378 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DQS__I2C3_SCL                              0x118 0x378 0x5B4 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14                            0x118 0x378 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DQS__CORESIGHT_TRACE12                     0x118 0x378 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__NAND_RE_B                            0x11C 0x37C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__FLEXSPI_B_DQS                        0x11C 0x37C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4                         0x11C 0x37C 0x620 0x2 0x1
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DCE_TX                         0x11C 0x37C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DTE_RX                         0x11C 0x37C 0x600 0x4 0x5
+#define MX8MP_IOMUXC_NAND_RE_B__GPIO3_IO15                           0x11C 0x37C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__CORESIGHT_TRACE13                    0x11C 0x37C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__NAND_READY_B                      0x120 0x380 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B                    0x120 0x380 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__I2C3_SCL                          0x120 0x380 0x5B4 0x4 0x2
+#define MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16                        0x120 0x380 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__CORESIGHT_TRACE14                 0x120 0x380 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__NAND_WE_B                            0x124 0x384 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK                           0x124 0x384 0x604 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WE_B__I2C3_SDA                             0x124 0x384 0x5B8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17                           0x124 0x384 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__CORESIGHT_TRACE15                    0x124 0x384 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__NAND_WP_B                            0x128 0x388 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD                           0x128 0x388 0x60C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WP_B__I2C4_SCL                             0x128 0x388 0x5BC 0x4 0x3
+#define MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18                           0x128 0x388 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__CORESIGHT_EVENTO                     0x128 0x388 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x12C 0x38C 0x508 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00              0x12C 0x38C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT                             0x12C 0x38C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL                             0x12C 0x38C 0x5CC 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19                           0x12C 0x38C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x130 0x390 0x4F4 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01               0x130 0x390 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT                              0x130 0x390 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA                              0x130 0x390 0x5D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK                      0x130 0x390 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20                            0x130 0x390 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x134 0x394 0x4F8 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02              0x134 0x394 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT                             0x134 0x394 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL                             0x134 0x394 0x5C4 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00            0x134 0x394 0x4C0 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21                           0x134 0x394 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x138 0x398 0x4FC 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03              0x138 0x398 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC                0x138 0x398 0x4D8 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC                0x138 0x398 0x510 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01            0x138 0x398 0x4C4 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22                           0x138 0x398 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX                              0x138 0x398 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x13C 0x39C 0x500 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04              0x13C 0x39C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC                0x13C 0x39C 0x4D8 0x2 0x1
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK                0x13C 0x39C 0x50C 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02            0x13C 0x39C 0x4C8 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23                           0x13C 0x39C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX                              0x13C 0x39C 0x54C 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x140 0x3A0 0x504 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05              0x140 0x3A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC                0x140 0x3A0 0x4D8 0x2 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00              0x140 0x3A0 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03            0x140 0x3A0 0x4CC 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24                           0x140 0x3A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX                              0x140 0x3A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                   0x144 0x3A4 0x4F0 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x144 0x3A4 0x4D4 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__PWM1_OUT                             0x144 0x3A4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA                             0x144 0x3A4 0x5C8 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25                           0x144 0x3A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX                              0x144 0x3A4 0x550 0x6 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC                0x148 0x3A8 0x4D0 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN                 0x148 0x3A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00                           0x148 0x3A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK                 0x14C 0x3AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_PDM_CLK                      0x14C 0x3AC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT                 0x14C 0x3AC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01                            0x14C 0x3AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00              0x150 0x3B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01              0x150 0x3B0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_PDM_BIT_STREAM00            0x150 0x3B0 0x4C0 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN                 0x150 0x3B0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                           0x150 0x3B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01              0x154 0x3B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_PDM_BIT_STREAM01            0x154 0x3B4 0x4C4 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT                0x154 0x3B4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                           0x154 0x3B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02              0x158 0x3B8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_PDM_BIT_STREAM02            0x158 0x3B8 0x4C8 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC                            0x158 0x3B8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04                           0x158 0x3B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03              0x15C 0x3BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_PDM_BIT_STREAM03            0x15C 0x3BC 0x4CC 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO                           0x15C 0x3BC 0x57C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05                           0x15C 0x3BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04              0x160 0x3C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK                0x160 0x3C0 0x524 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_RX_BCLK                0x160 0x3C0 0x518 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0                      0x160 0x3C0 0x580 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06                           0x160 0x3C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_DATA05              0x164 0x3C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_TX_DATA00              0x164 0x3C4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00              0x164 0x3C4 0x51C 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_SYNC                0x164 0x3C4 0x4D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1                      0x164 0x3C4 0x584 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07                           0x164 0x3C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI1_RX_DATA06              0x168 0x3C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_TX_SYNC                0x168 0x3C8 0x528 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_RX_SYNC                0x168 0x3C8 0x520 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2                      0x168 0x3C8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08                           0x168 0x3C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_RX_DATA07              0x16C 0x3CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI6_MCLK                   0x16C 0x3CC 0x514 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_SYNC                0x16C 0x3CC 0x4D8 0x2 0x3
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_DATA04              0x16C 0x3CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3                      0x16C 0x3CC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09                           0x16C 0x3CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC                0x170 0x3D0 0x4D8 0x0 0x4
+#define MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL                   0x170 0x3D0 0x588 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXFS__GPIO4_IO10                           0x170 0x3D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK                 0x174 0x3D4 0x4D4 0x0 0x1
+#define MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC                       0x174 0x3D4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11                            0x174 0x3D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00              0x178 0x3D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0                      0x178 0x3D8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12                           0x178 0x3D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01              0x17C 0x3DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1                      0x17C 0x3DC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13                           0x17C 0x3DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02              0x180 0x3E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2                      0x180 0x3E0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14                           0x180 0x3E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03              0x184 0x3E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3                      0x184 0x3E4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15                           0x184 0x3E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04              0x188 0x3E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_RX_BCLK                0x188 0x3E8 0x518 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_TX_BCLK                0x188 0x3E8 0x524 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL                   0x188 0x3E8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16                           0x188 0x3E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI1_TX_DATA05              0x18C 0x3EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_RX_DATA00              0x18C 0x3EC 0x51C 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00              0x18C 0x3EC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC                      0x18C 0x3EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17                           0x18C 0x3EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI1_TX_DATA06              0x190 0x3F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_RX_SYNC                0x190 0x3F0 0x520 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC                0x190 0x3F0 0x528 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER                          0x190 0x3F0 0x58C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18                           0x190 0x3F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07              0x194 0x3F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK                   0x194 0x3F4 0x514 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_PDM_CLK                     0x194 0x3F4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__ENET1_TX_ER                          0x194 0x3F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19                           0x194 0x3F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK                   0x198 0x3F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x198 0x3F8 0x4D4 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK                         0x198 0x3F8 0x578 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20                           0x198 0x3F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC                0x19C 0x3FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_SYNC                0x19C 0x3FC 0x510 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_DATA01              0x19C 0x3FC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x19C 0x3FC 0x4DC 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX                         0x19C 0x3FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX                         0x19C 0x3FC 0x5E8 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21                           0x19C 0x3FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_PDM_BIT_STREAM02            0x19C 0x3FC 0x4C8 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                 0x1A0 0x400 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                 0x1A0 0x400 0x50C 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXC__CAN1_TX                               0x1A0 0x400 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX                          0x1A0 0x400 0x5E8 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX                          0x1A0 0x400 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                            0x1A0 0x400 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_PDM_BIT_STREAM01             0x1A0 0x400 0x4C4 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00              0x1A4 0x404 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00              0x1A4 0x404 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT             0x1A4 0x404 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_TX_DATA01              0x1A4 0x404 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS                        0x1A4 0x404 0x5E4 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS                        0x1A4 0x404 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23                           0x1A4 0x404 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_PDM_BIT_STREAM03            0x1A4 0x404 0x4CC 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC                0x1A8 0x408 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01              0x1A8 0x408 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT             0x1A8 0x408 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1A8 0x408 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS                        0x1A8 0x408 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS                        0x1A8 0x408 0x5E4 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24                           0x1A8 0x408 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_PDM_BIT_STREAM02            0x1A8 0x408 0x4C8 0x6 0x6
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                 0x1AC 0x40C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02               0x1AC 0x40C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX                               0x1AC 0x40C 0x54C 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                            0x1AC 0x40C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_PDM_BIT_STREAM01             0x1AC 0x40C 0x4C4 0x6 0x6
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00              0x1B0 0x410 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03              0x1B0 0x410 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN              0x1B0 0x410 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX                              0x1B0 0x410 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN          0x1B0 0x410 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26                           0x1B0 0x410 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK                   0x1B4 0x414 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI5_MCLK                   0x1B4 0x414 0x4F0 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN              0x1B4 0x414 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX                              0x1B4 0x414 0x550 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN          0x1B4 0x414 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27                           0x1B4 0x414 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI3_MCLK                   0x1B4 0x414 0x4E0 0x6 0x1
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC                0x1B8 0x418 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x1B8 0x418 0x4DC 0x1 0x1
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x1B8 0x418 0x508 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01              0x1B8 0x418 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF1_IN                   0x1B8 0x418 0x544 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28                           0x1B8 0x418 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00            0x1B8 0x418 0x4C0 0x6 0x5
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                 0x1BC 0x41C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02               0x1BC 0x41C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x1BC 0x41C 0x4F4 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPT1_CLK                              0x1BC 0x41C 0x59C 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS                         0x1BC 0x41C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DTE_RTS                         0x1BC 0x41C 0x5EC 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29                            0x1BC 0x41C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK                      0x1BC 0x41C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00               0x1C0 0x420 0x4E4 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03               0x1C0 0x420 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00               0x1C0 0x420 0x4F8 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS                         0x1C0 0x420 0x5EC 0x4 0x3
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS                         0x1C0 0x420 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30                            0x1C0 0x420 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_PDM_BIT_STREAM01             0x1C0 0x420 0x4C4 0x6 0x7
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC                0x1C4 0x424 0x4EC 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1C4 0x424 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01              0x1C4 0x424 0x4FC 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01              0x1C4 0x424 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX                         0x1C4 0x424 0x5F0 0x4 0x4
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX                         0x1C4 0x424 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31                           0x1C4 0x424 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_PDM_BIT_STREAM03            0x1C4 0x424 0x4CC 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                 0x1C8 0x428 0x4E8 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02               0x1C8 0x428 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02               0x1C8 0x428 0x500 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXC__GPT1_CAPTURE1                         0x1C8 0x428 0x594 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX                          0x1C8 0x428 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX                          0x1C8 0x428 0x5F0 0x4 0x5
+#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00                            0x1C8 0x428 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_PDM_BIT_STREAM02             0x1C8 0x428 0x4C8 0x6 0x7
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00               0x1CC 0x42C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03               0x1CC 0x42C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03               0x1CC 0x42C 0x504 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXD__GPT1_CAPTURE2                         0x1CC 0x42C 0x598 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF1_EXT_CLK               0x1CC 0x42C 0x548 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01                            0x1CC 0x42C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK                   0x1D0 0x430 0x4E0 0x0 0x2
+#define MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT                             0x1D0 0x430 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI5_MCLK                   0x1D0 0x430 0x4F0 0x2 0x3
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_OUT                  0x1D0 0x430 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02                           0x1D0 0x430 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_IN                   0x1D0 0x430 0x544 0x6 0x3
+#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF1_OUT                   0x1D4 0x434 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT                              0x1D4 0x434 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL                              0x1D4 0x434 0x5C4 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_TX__GPT1_COMPARE1                         0x1D4 0x434 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__CAN1_TX                               0x1D4 0x434 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03                            0x1D4 0x434 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF1_IN                    0x1D8 0x438 0x544 0x0 0x4
+#define MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT                              0x1D8 0x438 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA                              0x1D8 0x438 0x5C8 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPT1_COMPARE2                         0x1D8 0x438 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__CAN1_RX                               0x1D8 0x438 0x54C 0x4 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04                            0x1D8 0x438 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPT1_COMPARE3                    0x1DC 0x43C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05                       0x1DC 0x43C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF1_EXT_CLK          0x1DC 0x43C 0x548 0x0 0x1
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT                         0x1DC 0x43C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK                        0x1E0 0x440 0x558 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX                       0x1E0 0x440 0x5F8 0x1 0x4
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DTE_TX                       0x1E0 0x440 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL                           0x1E0 0x440 0x5A4 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC              0x1E0 0x440 0x538 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__GPIO5_IO06                         0x1E0 0x440 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI                        0x1E4 0x444 0x560 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX                       0x1E4 0x444 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DTE_RX                       0x1E4 0x444 0x5F8 0x1 0x5
+#define MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA                           0x1E4 0x444 0x5A8 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK              0x1E4 0x444 0x530 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07                         0x1E4 0x444 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO                        0x1E8 0x448 0x55C 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS                      0x1E8 0x448 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DTE_RTS                      0x1E8 0x448 0x5F4 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI1_MISO__I2C2_SCL                           0x1E8 0x448 0x5AC 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00            0x1E8 0x448 0x534 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08                         0x1E8 0x448 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0                          0x1EC 0x44C 0x564 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS                       0x1EC 0x44C 0x5F4 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DTE_CTS                       0x1EC 0x44C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__I2C2_SDA                            0x1EC 0x44C 0x5B0 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC               0x1EC 0x44C 0x540 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09                          0x1EC 0x44C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK                        0x1F0 0x450 0x568 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX                       0x1F0 0x450 0x600 0x1 0x6
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DTE_TX                       0x1F0 0x450 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__I2C3_SCL                           0x1F0 0x450 0x5B4 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK              0x1F0 0x450 0x53C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10                         0x1F0 0x450 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI                        0x1F4 0x454 0x570 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX                       0x1F4 0x454 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DTE_RX                       0x1F4 0x454 0x600 0x1 0x7
+#define MX8MP_IOMUXC_ECSPI2_MOSI__I2C3_SDA                           0x1F4 0x454 0x5B8 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00            0x1F4 0x454 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11                         0x1F4 0x454 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12                         0x1F8 0x458 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO                        0x1F8 0x458 0x56C 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS                      0x1F8 0x458 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DTE_RTS                      0x1F8 0x458 0x5FC 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL                           0x1F8 0x458 0x5BC 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK                 0x1F8 0x458 0x52C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__CCM_CLKO1                          0x1F8 0x458 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0                          0x1FC 0x45C 0x574 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS                       0x1FC 0x45C 0x5FC 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DTE_CTS                       0x1FC 0x45C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA                            0x1FC 0x45C 0x5C0 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_SS0__CCM_CLKO2                           0x1FC 0x45C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13                          0x1FC 0x45C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL                              0x200 0x460 0x5A4 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SCL__ENET_QOS_MDC                          0x200 0x460 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK                           0x200 0x460 0x558 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14                            0x200 0x460 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA                              0x204 0x464 0x5A8 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ENET_QOS_MDIO                         0x204 0x464 0x590 0x1 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI                           0x204 0x464 0x560 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15                            0x204 0x464 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL                              0x208 0x468 0x5AC 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_IN               0x208 0x468 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__USDHC3_CD_B                           0x208 0x468 0x608 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO                           0x208 0x468 0x55C 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN           0x208 0x468 0x000 0x4 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16                            0x208 0x468 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA                              0x20C 0x46C 0x5B0 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT              0x20C 0x46C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__USDHC3_WP                             0x20C 0x46C 0x634 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SDA__ECSPI1_SS0                            0x20C 0x46C 0x564 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17                            0x20C 0x46C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                              0x210 0x470 0x5B4 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SCL__PWM4_OUT                              0x210 0x470 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK                              0x210 0x470 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__ECSPI2_SCLK                           0x210 0x470 0x568 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18                            0x210 0x470 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                              0x214 0x474 0x5B8 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT                              0x214 0x474 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK                              0x214 0x474 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__ECSPI2_MOSI                           0x214 0x474 0x570 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19                            0x214 0x474 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL                              0x218 0x478 0x5BC 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SCL__PWM2_OUT                              0x218 0x478 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B                         0x218 0x478 0x5A0 0x2 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__ECSPI2_MISO                           0x218 0x478 0x56C 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20                            0x218 0x478 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA                              0x21C 0x47C 0x5C0 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT                              0x21C 0x47C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__ECSPI2_SS0                            0x21C 0x47C 0x574 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21                            0x21C 0x47C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX                         0x220 0x480 0x5E8 0x0 0x4
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DTE_TX                         0x220 0x480 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK                          0x220 0x480 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22                           0x220 0x480 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX                         0x224 0x484 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DTE_RX                         0x224 0x484 0x5E8 0x0 0x5
+#define MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI                          0x224 0x484 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23                           0x224 0x484 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                         0x228 0x488 0x5F0 0x0 0x6
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DTE_TX                         0x228 0x488 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO                          0x228 0x488 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPT1_COMPARE3                        0x228 0x488 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24                           0x228 0x488 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                         0x22C 0x48C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DTE_RX                         0x22C 0x48C 0x5F0 0x0 0x7
+#define MX8MP_IOMUXC_UART2_TXD__ECSPI3_SS0                           0x22C 0x48C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPT1_COMPARE2                        0x22C 0x48C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25                           0x22C 0x48C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX                         0x230 0x490 0x5F8 0x0 0x6
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DTE_TX                         0x230 0x490 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS                        0x230 0x490 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS                        0x230 0x490 0x5E4 0x1 0x4
+#define MX8MP_IOMUXC_UART3_RXD__USDHC3_RESET_B                       0x230 0x490 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPT1_CAPTURE2                        0x230 0x490 0x598 0x3 0x1
+#define MX8MP_IOMUXC_UART3_RXD__CAN2_TX                              0x230 0x490 0x000 0x4 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26                           0x230 0x490 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX                         0x234 0x494 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DTE_RX                         0x234 0x494 0x5F8 0x0 0x7
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS                        0x234 0x494 0x5E4 0x1 0x5
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS                        0x234 0x494 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_TXD__USDHC3_VSELECT                       0x234 0x494 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_TXD__GPT1_CLK                             0x234 0x494 0x59C 0x3 0x1
+#define MX8MP_IOMUXC_UART3_TXD__CAN2_RX                              0x234 0x494 0x550 0x4 0x2
+#define MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27                           0x234 0x494 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX                         0x238 0x498 0x600 0x0 0x8
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DTE_TX                         0x238 0x498 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS                        0x238 0x498 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DTE_RTS                        0x238 0x498 0x5EC 0x1 0x4
+#define MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B                        0x238 0x498 0x5A0 0x2 0x1
+#define MX8MP_IOMUXC_UART4_RXD__GPT1_COMPARE1                        0x238 0x498 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART4_RXD__I2C6_SCL                             0x238 0x498 0x5CC 0x4 0x2
+#define MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28                           0x238 0x498 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX                         0x23C 0x49C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DTE_RX                         0x23C 0x49C 0x600 0x0 0x9
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS                        0x23C 0x49C 0x5EC 0x1 0x5
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DTE_CTS                        0x23C 0x49C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_TXD__GPT1_CAPTURE1                        0x23C 0x49C 0x594 0x3 0x1
+#define MX8MP_IOMUXC_UART4_TXD__I2C6_SDA                             0x23C 0x49C 0x5D0 0x4 0x2
+#define MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29                           0x23C 0x49C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL                  0x240 0x4A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL                          0x240 0x4A0 0x5C4 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__CAN1_TX                           0x240 0x4A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26                        0x240 0x4A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA                  0x244 0x4A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA                          0x244 0x4A4 0x5C8 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__CAN1_RX                           0x244 0x4A4 0x54C 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27                        0x244 0x4A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC                      0x248 0x4A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL                              0x248 0x4A8 0x5CC 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_CEC__CAN2_TX                               0x248 0x4A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28                            0x248 0x4A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD                      0x24C 0x4AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_HDMI_HPD_O                   0x24C 0x4AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__I2C6_SDA                              0x24C 0x4AC 0x5D0 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__CAN2_RX                               0x24C 0x4AC 0x550 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__GPIO3_IO29                            0x24C 0x4AC 0x000 0x5 0x0
+
+#endif /* __DTS_IMX8MP_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx8mp.dtsi b/roms/u-boot/arch/arm/dts/imx8mp.dtsi
new file mode 100644
index 000000000..ecccfbb4f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mp.dtsi
@@ -0,0 +1,792 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		i2c5 = &i2c6;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		soc-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+			trips {
+				soc_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 35 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 114 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mp-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
+				#thermal-sensor-cells = <1>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mp-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop",
+					     "syscon";
+				reg = <0x30360000 0x10000>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap =<&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mp-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+						  <&clk IMX8MP_CLK_A53_CORE>,
+						  <&clk IMX8MP_CLK_NOC>,
+						  <&clk IMX8MP_CLK_NOC_IO>,
+						  <&clk IMX8MP_CLK_GIC>,
+						  <&clk IMX8MP_CLK_AUDIO_AHB>,
+						  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
+						  <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>,
+						  <&clk IMX8MP_AUDIO_PLL1>,
+						  <&clk IMX8MP_AUDIO_PLL2>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_ARM_PLL_OUT>,
+							 <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL2_500M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>, <0>,
+						       <1000000000>,
+						       <800000000>,
+						       <500000000>,
+						       <400000000>,
+						       <800000000>,
+						       <400000000>,
+						       <393216000>,
+						       <361267200>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mp-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM1_ROOT>,
+					 <&clk IMX8MP_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM2_ROOT>,
+					 <&clk IMX8MP_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM3_ROOT>,
+					 <&clk IMX8MP_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM4_ROOT>,
+					 <&clk IMX8MP_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ecspi1: spi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
+					 <&clk IMX8MP_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
+					 <&clk IMX8MP_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
+					 <&clk IMX8MP_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan1: can@308c0000 {
+				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+					 <&clk IMX8MP_CLK_CAN1_ROOT>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&gpr 0x10 4>;
+				status = "disabled";
+			};
+
+			flexcan2: can@308d0000 {
+				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x308d0000 0x10000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+					 <&clk IMX8MP_CLK_CAN2_ROOT>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&gpr 0x10 5>;
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_AHB>,
+					 <&clk IMX8MP_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART4_ROOT>,
+					 <&clk IMX8MP_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			i2c5: i2c@30ad0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ad0000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C5_ROOT>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@30ae0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ae0000 0x10000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C6_ROOT>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MP_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec: ethernet@30be0000 {
+				compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
+					 <&clk IMX8MP_CLK_SIM_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_REF>,
+					 <&clk IMX8MP_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_REF>,
+						  <&clk IMX8MP_CLK_ENET_TIMER>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mq-cm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mq-cm-u-boot.dtsi
new file mode 100644
index 000000000..476a8e3db
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq-cm-u-boot.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+};
+
+&binman {
+	 u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "lpddr4_pmu_train_1d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "lpddr4_pmu_train_1d_dmem.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "lpddr4_pmu_train_2d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "lpddr4_pmu_train_2d_dmem.bin";
+			size = <0x4000>;
+		};
+	};
+
+	flash {
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x910000>;
+					entry = <0x910000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mq-cm.dts b/roms/u-boot/arch/arm/dts/imx8mq-cm.dts
new file mode 100644
index 000000000..cacbe4715
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq-cm.dts
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2021 Ronetix, Ilko Iliev <iliev@ronetix.at>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Ronetix iMX8M-CM SoM";
+	compatible = "ronetix,imx8mq-cm", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	reg_usdhc2_vmmc: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		/*
+		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+		 */
+		opp-166M {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800M {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	i2c_eeprom: i2c_eeprom@50 {
+		compatible = "microchip,24lc512";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&buck3_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	mx25l51245g: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&buck7_reg>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_buck2: vddarmgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
+		>;
+
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL	0x40000067
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA	0x40000067
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B		0x76
+			MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28		0x16
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x80  /* PMIC intr */
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdog1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mq-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mq-evk-u-boot.dtsi
new file mode 100644
index 000000000..2cfc12b7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq-evk-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+&usdhc1 {
+	mmc-hs400-1_8v;
+};
+
+&usdhc2 {
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mq-evk.dts b/roms/u-boot/arch/arm/dts/imx8mq-evk.dts
new file mode 100644
index 000000000..85b045253
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq-evk.dts
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "NXP i.MX8MQ EVK";
+	compatible = "fsl,imx8mq-evk", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0xc0000000>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	buck2_reg: regulator-buck2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buck2>;
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1000000>;
+		gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		states = <1000000 0x0
+			  900000 0x1>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+
+	wm8524: audio-codec {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
+
+	sound-hdmi-arc {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-hdmi-arc";
+		spdif-controller = <&spdif2>;
+		spdif-in;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		/*
+		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+		 */
+		opp-166M {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800M {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+
+	wl-reg-on-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		pinctrl-0 = <&pinctrl_mipi_dsi>;
+		pinctrl-names = "default";
+		compatible = "raydium,rm67191";
+		reg = <0>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+		dsi-lanes = <4>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	n25q256a: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&spdif2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&sw4_reg>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_buck2: vddarmgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
+		>;
+
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x4f
+		>;
+	};
+
+	pinctrl_mipi_dsi: mipidsigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6		0x16
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B		0x76
+			MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28		0x16
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0xd6
+		>;
+	};
+
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdog1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wifi_reset: wifiresetgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29		0x16
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi
new file mode 100644
index 000000000..4712cf6a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mq-phanbell.dts b/roms/u-boot/arch/arm/dts/imx8mq-phanbell.dts
new file mode 100644
index 000000000..4892ad5ee
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq-phanbell.dts
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Google i.MX8MQ Phanbell";
+	compatible = "google,imx8mq-phanbell", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
+		clocks = <&pmic_osc>;
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <900000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <50>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mq-pico-pi.dts b/roms/u-boot/arch/arm/dts/imx8mq-pico-pi.dts
new file mode 100644
index 000000000..d2af18ad0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq-pico-pi.dts
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Wandboard, Org.
+ * Copyright 2017 NXP
+ *
+ * Author: Richard Hu <hakahu@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "TechNexion PICO-PI-8M";
+	compatible = "technexion,pico-pi-imx8m", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_eth_phy: eth_phy {
+		compatible = "regulator-fixed";
+		regulator-name = "eth_phy_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_eth_phy>;
+	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	phy-reset-post-delay = <100>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		reg = <0x4b>;
+		compatible = "rohm,bd71837";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+		interrupt-names = "irq";
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x19
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_otg_vbus: otgvbusgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19   /* USB OTG VBUS Enable */
+		>;
+	};
+
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8mq-pinfunc.h b/roms/u-boot/arch/arm/dts/imx8mq-pinfunc.h
new file mode 100644
index 000000000..b94b02080
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq-pinfunc.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef __DTS_IMX8MQ_PINFUNC_H
+#define __DTS_IMX8MQ_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MQ_IOMUXC_PMIC_STBY_REQ_CCMSRCGPCMIX_PMIC_STBY_REQ               0x014 0x27C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_PMIC_ON_REQ_SNVSMIX_PMIC_ON_REQ                        0x018 0x280 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ONOFF_SNVSMIX_ONOFF                                    0x01C 0x284 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_POR_B_SNVSMIX_POR_B                                    0x020 0x288 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_RTC_RESET_B_SNVSMIX_RTC_RESET_B                        0x024 0x28C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0                                   0x028 0x290 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT          0x028 0x290 0x4C0 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                          0x028 0x290 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                       0x028 0x290 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_SJC_FAIL                                    0x028 0x290 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1                                   0x02C 0x294 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT                                    0x02C 0x294 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                          0x02C 0x294 0x4BC 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                       0x02C 0x294 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_SJC_ACTIVE                                  0x02C 0x294 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_GPIO1_IO2                                   0x030 0x298 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                0x030 0x298 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                              0x030 0x298 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_SJC_DE_B                                    0x030 0x298 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3                                   0x034 0x29C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                              0x034 0x29C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                            0x034 0x29C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                              0x034 0x29C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_SJC_DONE                                    0x034 0x29C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4                                   0x038 0x2A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                              0x038 0x2A0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                            0x038 0x2A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                           0x038 0x2A0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG                            0x038 0x2A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5                                   0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_M4_NMI                                      0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                     0x03C 0x2A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                       0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG                            0x03C 0x2A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6                                   0x040 0x2A8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_ENET1_MDC                                   0x040 0x2A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                 0x040 0x2A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                       0x040 0x2A8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG                            0x040 0x2A8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7                                   0x044 0x2AC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_ENET1_MDIO                                  0x044 0x2AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_USDHC1_WP                                   0x044 0x2AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                       0x044 0x2AC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG                            0x044 0x2AC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8                                   0x048 0x2B0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                        0x048 0x2B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                              0x048 0x2B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                           0x048 0x2B0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG                              0x048 0x2B0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9                                   0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                       0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                            0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                           0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG                           0x04C 0x2B4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10                                  0x050 0x2B8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                 0x050 0x2B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED             0x050 0x2B8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11                                  0x054 0x2BC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_USB2_OTG_ID                                 0x054 0x2BC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                     0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MQ_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                           0x054 0x2BC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS                    0x054 0x2BC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12                                  0x058 0x2C0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                0x058 0x2C0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                            0x058 0x2C0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                           0x058 0x2C0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0                          0x058 0x2C0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13                                  0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                 0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT                                    0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                           0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1                          0x05C 0x2C4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14                                  0x060 0x2C8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_USB2_OTG_PWR                                0x060 0x2C8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT                                    0x060 0x2C8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                          0x060 0x2C8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2                          0x060 0x2C8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15                                  0x064 0x2CC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_USB2_OTG_OC                                 0x064 0x2CC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT                                    0x064 0x2CC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                          0x064 0x2CC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB                             0x064 0x2CC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC                                     0x068 0x2D0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16                                    0x068 0x2D0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO                                   0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17                                   0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                               0x070 0x2D8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD3_GPIO1_IO18                                    0x070 0x2D8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                               0x074 0x2DC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK                                  0x074 0x2DC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_GPIO1_IO19                                    0x074 0x2DC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                               0x078 0x2E0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20                                    0x078 0x2E0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                               0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD0_GPIO1_IO21                                    0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                         0x080 0x2E8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                 0x080 0x2E8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                               0x084 0x2EC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_ENET1_TX_ER                                   0x084 0x2EC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_GPIO1_IO23                                    0x084 0x2EC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                         0x088 0x2F0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                 0x088 0x2F0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                               0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER                                   0x08C 0x2F4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25                                    0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                               0x090 0x2F8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD0_GPIO1_IO26                                    0x090 0x2F8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                               0x094 0x2FC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27                                    0x094 0x2FC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                               0x098 0x300 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28                                    0x098 0x300 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                               0x09C 0x304 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29                                    0x09C 0x304 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                                     0x0A0 0x308 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_CLK_GPIO2_IO0                                      0x0A0 0x308 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA2_GPIO2_IO4                                    0x0B0 0x318 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3                                 0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA3_GPIO2_IO5                                    0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4                                 0x0B8 0x320 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA4_GPIO2_IO6                                    0x0B8 0x320 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5                                 0x0BC 0x324 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA5_GPIO2_IO7                                    0x0BC 0x324 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6                                 0x0C0 0x328 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA6_GPIO2_IO8                                    0x0C0 0x328 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7                                 0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA7_GPIO2_IO9                                    0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                             0x0C8 0x330 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10                                 0x0C8 0x330 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE                               0x0CC 0x334 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11                                  0x0CC 0x334 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B                                   0x0D0 0x338 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12                                    0x0D0 0x338 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                                     0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_GPIO2_IO13                                     0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                          0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0                               0x0D4 0x33C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                                     0x0D8 0x340 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_GPIO2_IO14                                     0x0D8 0x340 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                          0x0D8 0x340 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1                               0x0D8 0x340 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0                                 0x0DC 0x344 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_GPIO2_IO15                                   0x0DC 0x344 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                        0x0DC 0x344 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2                             0x0DC 0x344 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1                                 0x0E0 0x348 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_GPIO2_IO16                                   0x0E0 0x348 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                            0x0E0 0x348 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3                             0x0E0 0x348 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2                                 0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_GPIO2_IO17                                   0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                            0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4                             0x0E4 0x34C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3                                 0x0E8 0x350 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_GPIO2_IO18                                   0x0E8 0x350 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                     0x0E8 0x350 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                             0x0EC 0x354 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19                                 0x0EC 0x354 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                  0x0EC 0x354 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_WP_USDHC2_WP                                       0x0F0 0x358 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20                                      0x0F0 0x358 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_WP_SIM_M_HMASTLOCK                                 0x0F0 0x358 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_RAWNAND_ALE                                   0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK                                   0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0                                     0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_SIM_M_HPROT0                                  0x0F4 0x35C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                               0x0F8 0x360 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                0x0F8 0x360 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1                                   0x0F8 0x360 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_SIM_M_HPROT1                                0x0F8 0x360 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                               0x0FC 0x364 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                0x0FC 0x364 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2                                   0x0FC 0x364 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_SIM_M_HPROT2                                0x0FC 0x364 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                               0x100 0x368 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                0x100 0x368 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3                                   0x100 0x368 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_SIM_M_HPROT3                                0x100 0x368 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                               0x104 0x36C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                0x104 0x36C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4                                   0x104 0x36C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_SIM_M_HADDR0                                0x104 0x36C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_RAWNAND_CLE                                   0x108 0x370 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_QSPI_B_SCLK                                   0x108 0x370 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5                                     0x108 0x370 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_SIM_M_HADDR1                                  0x108 0x370 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_RAWNAND_DATA00                             0x10C 0x374 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0                               0x10C 0x374 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6                                  0x10C 0x374 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_SIM_M_HADDR2                               0x10C 0x374 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_RAWNAND_DATA01                             0x110 0x378 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1                               0x110 0x378 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7                                  0x110 0x378 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_SIM_M_HADDR3                               0x110 0x378 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_RAWNAND_DATA02                             0x114 0x37C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2                               0x114 0x37C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8                                  0x114 0x37C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_SIM_M_HADDR4                               0x114 0x37C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_RAWNAND_DATA03                             0x118 0x380 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3                               0x118 0x380 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9                                  0x118 0x380 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_SIM_M_HADDR5                               0x118 0x380 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_RAWNAND_DATA04                             0x11C 0x384 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_QSPI_B_DATA0                               0x11C 0x384 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10                                 0x11C 0x384 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_SIM_M_HADDR6                               0x11C 0x384 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_RAWNAND_DATA05                             0x120 0x388 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_QSPI_B_DATA1                               0x120 0x388 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11                                 0x120 0x388 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_SIM_M_HADDR7                               0x120 0x388 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_RAWNAND_DATA06                             0x124 0x38C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_QSPI_B_DATA2                               0x124 0x38C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12                                 0x124 0x38C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_SIM_M_HADDR8                               0x124 0x38C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_RAWNAND_DATA07                             0x128 0x390 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_QSPI_B_DATA3                               0x128 0x390 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13                                 0x128 0x390 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_SIM_M_HADDR9                               0x128 0x390 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_RAWNAND_DQS                                   0x12C 0x394 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_QSPI_A_DQS                                    0x12C 0x394 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14                                    0x12C 0x394 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_SIM_M_HADDR10                                 0x12C 0x394 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                 0x130 0x398 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_QSPI_B_DQS                                   0x130 0x398 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15                                   0x130 0x398 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_SIM_M_HADDR11                                0x130 0x398 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_RAWNAND_READY_B                           0x134 0x39C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16                                0x134 0x39C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_SIM_M_HADDR12                             0x134 0x39C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                 0x138 0x3A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17                                   0x138 0x3A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_SIM_M_HADDR13                                0x138 0x3A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                 0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18                                   0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_SIM_M_HADDR14                                0x13C 0x3A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                 0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0                                0x140 0x3A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19                                   0x140 0x3A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                  0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_SAI1_TX_DATA1                                 0x144 0x3AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20                                    0x144 0x3AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2                                0x148 0x3B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21                                   0x148 0x3B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3                                0x14C 0x3B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC                                 0x14C 0x3B4 0x4CC 0x2 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                 0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22                                   0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4                                0x150 0x3B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC                                 0x150 0x3B8 0x4CC 0x2 0x1
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                 0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23                                   0x150 0x3B8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5                                0x154 0x3BC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC                                 0x154 0x3BC 0x4CC 0x2 0x2
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                0x154 0x3BC 0x000 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24                                   0x154 0x3BC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI5_MCLK                                    0x158 0x3C0 0x52C 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK                                 0x158 0x3C0 0x4C8 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI4_MCLK                                    0x158 0x3C0 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25                                   0x158 0x3C0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK                      0x158 0x3C0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC                                 0x15C 0x3C4 0x4C4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC                                 0x15C 0x3C4 0x4E4 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK                          0x15C 0x3C4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0                                    0x15C 0x3C4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SIM_M_HADDR15                                0x15C 0x3C4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SAI1_RX_BCLK                                  0x160 0x3C8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SAI5_RX_BCLK                                  0x160 0x3C8 0x4D0 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL                           0x160 0x3C8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1                                     0x160 0x3C8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SIM_M_HADDR16                                 0x160 0x3C8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0                                0x164 0x3CC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0                                0x164 0x3CC 0x4D4 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0                             0x164 0x3CC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_GPIO4_IO2                                    0x164 0x3CC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0                       0x164 0x3CC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SIM_M_HADDR17                                0x164 0x3CC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1                                0x168 0x3D0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1                                0x168 0x3D0 0x4D8 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1                             0x168 0x3D0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3                                    0x168 0x3D0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1                       0x168 0x3D0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SIM_M_HADDR18                                0x168 0x3D0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2                                0x16C 0x3D4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2                                0x16C 0x3D4 0x4DC 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2                             0x16C 0x3D4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4                                    0x16C 0x3D4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2                       0x16C 0x3D4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SIM_M_HADDR19                                0x16C 0x3D4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3                                0x170 0x3D8 0x4E0 0x0 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3                                0x170 0x3D8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3                             0x170 0x3D8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5                                    0x170 0x3D8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3                       0x170 0x3D8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_SIM_M_HADDR20                                0x170 0x3D8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4                                0x174 0x3DC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK                                 0x174 0x3DC 0x51C 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK                                 0x174 0x3DC 0x510 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4                             0x174 0x3DC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6                                    0x174 0x3DC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4                       0x174 0x3DC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SIM_M_HADDR21                                0x174 0x3DC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5                                0x178 0x3E0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0                                0x178 0x3E0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0                                0x178 0x3E0 0x514 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC                                 0x178 0x3E0 0x4C4 0x3 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5                             0x178 0x3E0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7                                    0x178 0x3E0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5                       0x178 0x3E0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SIM_M_HADDR22                                0x178 0x3E0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6                                0x17C 0x3E4 0x520 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC                                 0x17C 0x3E4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC                                 0x17C 0x3E4 0x518 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6                             0x17C 0x3E4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8                                    0x17C 0x3E4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6                       0x17C 0x3E4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SIM_M_HADDR23                                0x17C 0x3E4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7                                0x180 0x3E8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI6_MCLK                                    0x180 0x3E8 0x530 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC                                 0x180 0x3E8 0x4CC 0x2 0x4
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4                                0x180 0x3E8 0x000 0x3 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7                             0x180 0x3E8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9                                    0x180 0x3E8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7                       0x180 0x3E8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SIM_M_HADDR24                                0x180 0x3E8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC                                 0x184 0x3EC 0x4CC 0x0 0x3
+#define MX8MQ_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC                                 0x184 0x3EC 0x4EC 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO                             0x184 0x3EC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10                                   0x184 0x3EC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_SIM_M_HADDR25                                0x184 0x3EC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_SAI1_TX_BCLK                                  0x188 0x3F0 0x4C8 0x0 0x1
+#define MX8MQ_IOMUXC_SAI1_TXC_SAI5_TX_BCLK                                  0x188 0x3F0 0x4E8 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI                              0x188 0x3F0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_GPIO4_IO11                                    0x188 0x3F0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_SIM_M_HADDR26                                 0x188 0x3F0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0                                0x18C 0x3F4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0                                0x18C 0x3F4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8                             0x18C 0x3F4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_GPIO4_IO12                                   0x18C 0x3F4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8                       0x18C 0x3F4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SIM_M_HADDR27                                0x18C 0x3F4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1                                0x190 0x3F8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1                                0x190 0x3F8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9                             0x190 0x3F8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13                                   0x190 0x3F8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9                       0x190 0x3F8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SIM_M_HADDR28                                0x190 0x3F8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2                                0x194 0x3FC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2                                0x194 0x3FC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10                            0x194 0x3FC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14                                   0x194 0x3FC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10                      0x194 0x3FC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SIM_M_HADDR29                                0x194 0x3FC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3                                0x198 0x400 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3                                0x198 0x400 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11                            0x198 0x400 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15                                   0x198 0x400 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11                      0x198 0x400 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SIM_M_HADDR30                                0x198 0x400 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4                                0x19C 0x404 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK                                 0x19C 0x404 0x510 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK                                 0x19C 0x404 0x51C 0x2 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12                            0x19C 0x404 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16                                   0x19C 0x404 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12                      0x19C 0x404 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SIM_M_HADDR31                                0x19C 0x404 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5                                0x1A0 0x408 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0                                0x1A0 0x408 0x514 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0                                0x1A0 0x408 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13                            0x1A0 0x408 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17                                   0x1A0 0x408 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13                      0x1A0 0x408 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SIM_M_HBURST0                                0x1A0 0x408 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6                                0x1A4 0x40C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC                                 0x1A4 0x40C 0x518 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC                                 0x1A4 0x40C 0x520 0x2 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14                            0x1A4 0x40C 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18                                   0x1A4 0x40C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14                      0x1A4 0x40C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SIM_M_HBURST1                                0x1A4 0x40C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7                                0x1A8 0x410 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SAI6_MCLK                                    0x1A8 0x410 0x530 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15                            0x1A8 0x410 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19                                   0x1A8 0x410 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15                      0x1A8 0x410 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SIM_M_HBURST2                                0x1A8 0x410 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI1_MCLK                                    0x1AC 0x414 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI5_MCLK                                    0x1AC 0x414 0x52C 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK                                 0x1AC 0x414 0x4C8 0x2 0x2
+#define MX8MQ_IOMUXC_SAI1_MCLK_GPIO4_IO20                                   0x1AC 0x414 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                0x1B8 0x420 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23                                   0x1B8 0x420 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2                                 0x1B8 0x420 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                 0x1BC 0x424 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                0x1BC 0x424 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_GPIO4_IO24                                   0x1BC 0x424 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SIM_M_HWRITE                                 0x1BC 0x424 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                  0x1C0 0x428 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                 0x1C0 0x428 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_GPIO4_IO25                                    0x1C0 0x428 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT                               0x1C0 0x428 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_GPIO4_IO26                                   0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_TPSMP_CLK                                    0x1C4 0x42C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK                                    0x1C8 0x430 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_SAI5_MCLK                                    0x1C8 0x430 0x52C 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_MCLK_GPIO4_IO27                                   0x1C8 0x430 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR                              0x1C8 0x430 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                 0x1CC 0x434 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                0x1CC 0x434 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                 0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28                                   0x1CC 0x434 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0                                0x1CC 0x434 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_GPT1_CAPTURE2                                 0x1D0 0x438 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_GPT1_CLK                                     0x1D8 0x440 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                 0x1E0 0x448 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                 0x1E0 0x448 0x4E0 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXD_GPIO5_IO1                                     0x1E0 0x448 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_TPSMP_HDATA3                                  0x1E0 0x448 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK                                    0x1E4 0x44C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT                                     0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_SAI5_MCLK                                    0x1E4 0x44C 0x52C 0x2 0x3
+#define MX8MQ_IOMUXC_SAI3_MCLK_GPIO5_IO2                                    0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_TPSMP_HDATA4                                 0x1E4 0x44C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT                                    0x1E8 0x450 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT                                      0x1E8 0x450 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3                                     0x1E8 0x450 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_TPSMP_HDATA5                                  0x1E8 0x450 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN                                     0x1EC 0x454 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT                                      0x1EC 0x454 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4                                     0x1EC 0x454 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_TPSMP_HDATA6                                  0x1EC 0x454 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                           0x1F0 0x458 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                 0x1F0 0x458 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                0x1F0 0x458 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7                             0x1F0 0x458 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                0x1F4 0x45C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                               0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                               0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                  0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8                               0x1F4 0x45C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                0x1F8 0x460 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                               0x1F8 0x460 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                               0x1F8 0x460 0x504 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                  0x1F8 0x460 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9                               0x1F8 0x460 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                0x1FC 0x464 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                            0x1FC 0x464 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                            0x1FC 0x464 0x500 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                  0x1FC 0x464 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10                              0x1FC 0x464 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                  0x200 0x468 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                             0x200 0x468 0x500 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                             0x200 0x468 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                   0x200 0x468 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11                               0x200 0x468 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                0x204 0x46C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                               0x204 0x46C 0x50C 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                               0x204 0x46C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                 0x204 0x46C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12                              0x204 0x46C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                0x208 0x470 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                               0x208 0x470 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                               0x208 0x470 0x50C 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                 0x208 0x470 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13                              0x208 0x470 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                0x20C 0x474 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                            0x20C 0x474 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                            0x20C 0x474 0x508 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                 0x20C 0x474 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14                              0x20C 0x474 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                  0x210 0x478 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                             0x210 0x478 0x508 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                             0x210 0x478 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                  0x210 0x478 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15                               0x210 0x478 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL                                      0x214 0x47C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_ENET1_MDC                                     0x214 0x47C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14                                    0x214 0x47C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_TPSMP_HDATA16                                 0x214 0x47C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA                                      0x218 0x480 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_ENET1_MDIO                                    0x218 0x480 0x4C0 0x1 0x2
+#define MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15                                    0x218 0x480 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_TPSMP_HDATA17                                 0x218 0x480 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL                                      0x21C 0x484 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                          0x21C 0x484 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16                                    0x21C 0x484 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_TPSMP_HDATA18                                 0x21C 0x484 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA                                      0x220 0x488 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                         0x220 0x488 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17                                    0x220 0x488 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_TPSMP_HDATA19                                 0x220 0x488 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL                                      0x224 0x48C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_PWM4_OUT                                      0x224 0x48C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_GPT2_CLK                                      0x224 0x48C 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18                                    0x224 0x48C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_TPSMP_HDATA20                                 0x224 0x48C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA                                      0x228 0x490 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_PWM3_OUT                                      0x228 0x490 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_GPT3_CLK                                      0x228 0x490 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19                                    0x228 0x490 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_TPSMP_HDATA21                                 0x228 0x490 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL                                      0x22C 0x494 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_PWM2_OUT                                      0x22C 0x494 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B                                0x22C 0x494 0x524 0x2 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_GPIO5_IO20                                    0x22C 0x494 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_TPSMP_HDATA22                                 0x22C 0x494 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA                                      0x230 0x498 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_PWM1_OUT                                      0x230 0x498 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B                                0x230 0x498 0x528 0x2 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_GPIO5_IO21                                    0x230 0x498 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_TPSMP_HDATA23                                 0x230 0x498 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX                                 0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_UART1_DTE_TX                                 0x234 0x49C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_ECSPI3_SCLK                                  0x234 0x49C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX                                 0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_UART2_DTE_TX                                 0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_ECSPI3_MISO                                  0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_GPIO5_IO24                                   0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_TPSMP_HDATA26                                0x23C 0x4A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX                                 0x240 0x4A8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_UART2_DTE_RX                                 0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MQ_IOMUXC_UART2_TXD_ECSPI3_SS0                                   0x240 0x4A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_GPIO5_IO25                                   0x240 0x4A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_TPSMP_HDATA27                                0x240 0x4A8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX                                 0x244 0x4AC 0x504 0x0 0x2
+#define MX8MQ_IOMUXC_UART3_RXD_UART3_DTE_TX                                 0x244 0x4AC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                              0x244 0x4AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                              0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_GPIO5_IO26                                   0x244 0x4AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_TPSMP_HDATA28                                0x244 0x4AC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX                                 0x248 0x4B0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_UART3_DTE_RX                                 0x248 0x4B0 0x504 0x0 0x3
+#define MX8MQ_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                              0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MQ_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                              0x248 0x4B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_GPIO5_IO27                                   0x248 0x4B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_TPSMP_HDATA29                                0x248 0x4B0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX                                 0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MQ_IOMUXC_UART4_RXD_UART4_DTE_TX                                 0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                              0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                              0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B                               0x24C 0x4B4 0x524 0x2 0x1
+#define MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28                                   0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_TPSMP_HDATA30                                0x24C 0x4B4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX                                 0x250 0x4B8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_UART4_DTE_RX                                 0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                              0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MQ_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                              0x250 0x4B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B                               0x250 0x4B8 0x528 0x2 0x1
+#define MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29                                   0x250 0x4B8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_TPSMP_HDATA31                                0x250 0x4B8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_TEST_MODE                                              0x000 0x254 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_BOOT_MODE0                                             0x000 0x258 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_BOOT_MODE1                                             0x000 0x25C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_MOD                                               0x000 0x260 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TRST_B                                            0x000 0x264 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TDI                                               0x000 0x268 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TMS                                               0x000 0x26C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TCK                                               0x000 0x270 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TDO                                               0x000 0x274 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_RTC                                                    0x000 0x278 0x000 0x0 0x0
+
+#endif /* __DTS_IMX8MQ_PINFUNC_H */
diff --git a/roms/u-boot/arch/arm/dts/imx8mq.dtsi b/roms/u-boot/arch/arm/dts/imx8mq.dtsi
new file mode 100644
index 000000000..a841a023e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8mq.dtsi
@@ -0,0 +1,1385 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <dt-bindings/clock/imx8mq-clock.h>
+#include <dt-bindings/power/imx8mq-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "imx8mq-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gpc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc_25m: clock-osc-25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc_25m";
+	};
+
+	osc_27m: clock-osc-27m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-output-names = "osc_27m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000>;
+			/* Industrial only */
+			opp-supported-hw = <0xf>, <0x4>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <900000>;
+			/* Consumer only */
+			opp-supported-hw = <0xe>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0xc>, <0x4>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				gpu_alert: gpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				vpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+		             <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+		             <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+		             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+
+		bus@30000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30000000 0x30000000 0x400000>;
+
+			sai1: sai@30010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
+				         <&clk IMX8MQ_CLK_SAI1_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
+				         <&clk IMX8MQ_CLK_SAI6_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30040000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30040000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
+				         <&clk IMX8MQ_CLK_SAI5_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@30050000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
+				         <&clk IMX8MQ_CLK_SAI4_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mq-tmu";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
+				little-endian;
+				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+				fsl,tmu-calibration = <0x00000000 0x00000023
+						       0x00000001 0x00000029
+						       0x00000002 0x0000002f
+						       0x00000003 0x00000035
+						       0x00000004 0x0000003d
+						       0x00000005 0x00000043
+						       0x00000006 0x0000004b
+						       0x00000007 0x00000051
+						       0x00000008 0x00000057
+						       0x00000009 0x0000005f
+						       0x0000000a 0x00000067
+						       0x0000000b 0x0000006f
+
+						       0x00010000 0x0000001b
+						       0x00010001 0x00000023
+						       0x00010002 0x0000002b
+						       0x00010003 0x00000033
+						       0x00010004 0x0000003b
+						       0x00010005 0x00000043
+						       0x00010006 0x0000004b
+						       0x00010007 0x00000055
+						       0x00010008 0x0000005d
+						       0x00010009 0x00000067
+						       0x0001000a 0x00000070
+
+						       0x00020000 0x00000017
+						       0x00020001 0x00000023
+						       0x00020002 0x0000002d
+						       0x00020003 0x00000037
+						       0x00020004 0x00000041
+						       0x00020005 0x0000004b
+						       0x00020006 0x00000057
+						       0x00020007 0x00000063
+						       0x00020008 0x0000006f
+
+						       0x00030000 0x00000015
+						       0x00030001 0x00000021
+						       0x00030002 0x0000002d
+						       0x00030003 0x00000039
+						       0x00030004 0x00000045
+						       0x00030005 0x00000053
+						       0x00030006 0x0000005f
+						       0x00030007 0x00000071>;
+				#thermal-sensor-cells =  <1>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma2: sdma@302c0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			lcdif: lcd-controller@30320000 {
+				compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+				clock-names = "pix";
+				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+						  <&clk IMX8MQ_VIDEO_PLL1>,
+						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+				status = "disabled";
+
+				port@0 {
+					lcdif_mipi_dsi: endpoint {
+						remote-endpoint = <&mipi_dsi_lcdif_in>;
+					};
+				};
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mq-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			iomuxc_gpr: syscon@30340000 {
+				compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr",
+					     "syscon", "simple-mfd";
+				reg = <0x30340000 0x10000>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+					mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
+				};
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mq-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			anatop: syscon@30360000 {
+				compatible = "fsl,imx8mq-anatop", "syscon";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp{
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap =<&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mq-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
+				         <&clk_ext1>, <&clk_ext2>,
+				         <&clk_ext3>, <&clk_ext4>;
+				clock-names = "ckil", "osc_25m", "osc_27m",
+				              "clk_ext1", "clk_ext2",
+				              "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>,
+						  <&clk IMX8MQ_CLK_A53_CORE>,
+						  <&clk IMX8MQ_CLK_NOC>,
+						  <&clk IMX8MQ_CLK_AUDIO_AHB>,
+						  <&clk IMX8MQ_AUDIO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_AUDIO_PLL2_BYPASS>,
+						  <&clk IMX8MQ_AUDIO_PLL1>,
+						  <&clk IMX8MQ_AUDIO_PLL2>;
+				assigned-clock-rates = <0>, <0>,
+						       <800000000>,
+						       <0>,
+						       <0>,
+						       <0>,
+						       <786432000>,
+						       <722534400>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>,
+							 <&clk IMX8MQ_ARM_PLL_OUT>,
+							 <0>,
+							 <&clk IMX8MQ_SYS2_PLL_500M>,
+							 <&clk IMX8MQ_AUDIO_PLL1>,
+							 <&clk IMX8MQ_AUDIO_PLL2>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mq-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_mipi: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI>;
+					};
+
+					/*
+					 * As per comment in ATF source code:
+					 *
+					 * PCIE1 and PCIE2 share the
+					 * same reset signal, if we
+					 * power down PCIE2, PCIE1
+					 * will be held in reset too.
+					 *
+					 * So instead of creating two
+					 * separate power domains for
+					 * PCIE1 and PCIE2 we create a
+					 * link between both and use
+					 * it as a shared PCIE power
+					 * domain.
+					 */
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_PCIE1>;
+						power-domains = <&pgc_pcie2>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
+					};
+
+					pgc_ddr1: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_DDR1>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+						         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+							 <&clk IMX8MQ_CLK_GPU_AXI>,
+						         <&clk IMX8MQ_CLK_GPU_AHB>;
+					};
+
+					pgc_vpu: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_VPU>;
+						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
+					};
+
+					pgc_disp: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_DISP>;
+					};
+
+					pgc_mipi_csi1: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
+					};
+
+					pgc_mipi_csi2: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
+					};
+
+					pgc_pcie2: power-domain@a {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_PCIE2>;
+					};
+				};
+			};
+		};
+
+		bus@30400000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30400000 0x30400000 0x400000>;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_25m>;
+				clock-names = "per";
+			};
+		};
+
+		bus@30800000 { /* AIPS3 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x08000000 0x08000000 0x10000000>;
+
+			spdif1: spdif@30810000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x30810000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
+					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
+					<&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
+					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
+					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi1: spi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
+				         <&clk IMX8MQ_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
+				         <&clk IMX8MQ_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
+				         <&clk IMX8MQ_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spdif2: spdif@308a0000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x308a0000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
+					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
+					<&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
+					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
+					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
+					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
+				         <&clk IMX8MQ_CLK_SAI3_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_AHB>,
+					 <&clk IMX8MQ_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			mipi_dsi: mipi-dsi@30a00000 {
+				compatible = "fsl,imx8mq-nwl-dsi";
+				reg = <0x30a00000 0x300>;
+				clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+					 <&clk IMX8MQ_CLK_DSI_AHB>,
+					 <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+					 <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+					 <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+				clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+				assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
+						  <&clk IMX8MQ_CLK_DSI_CORE>,
+						  <&clk IMX8MQ_CLK_DSI_IPG_DIV>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
+							 <&clk IMX8MQ_SYS1_PLL_266M>;
+				assigned-clock-rates = <80000000>, <266000000>, <20000000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				mux-controls = <&mux 0>;
+				power-domains = <&pgc_mipi>;
+				phys = <&dphy>;
+				phy-names = "dphy";
+				resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+				reset-names = "byte", "dpi", "esc", "pclk";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						mipi_dsi_lcdif_in: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&lcdif_mipi_dsi>;
+						};
+					};
+				};
+			};
+
+			dphy: dphy@30a00300 {
+				compatible = "fsl,imx8mq-mipi-dphy";
+				reg = <0x30a00300 0x100>;
+				clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+				clock-names = "phy_ref";
+				assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <24000000>;
+				#phy-cells = <0>;
+				power-domains = <&pgc_mipi>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
+				         <&clk IMX8MQ_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mq-usdhc",
+				             "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
+				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mq-usdhc",
+				             "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
+				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			qspi0: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
+				reg = <0x30bb0000 0x10000>,
+				      <0x08000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
+					 <&clk IMX8MQ_CLK_QSPI_ROOT>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			sdma1: sdma@30bd0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MQ_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
+				         <&clk IMX8MQ_CLK_ENET1_ROOT>,
+				         <&clk IMX8MQ_CLK_ENET_TIMER>,
+				         <&clk IMX8MQ_CLK_ENET_REF>,
+				         <&clk IMX8MQ_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+				              "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				status = "disabled";
+			};
+		};
+
+		bus@32c00000 { /* AIPS4 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x32c00000 0x32c00000 0x400000>;
+
+			irqsteer: interrupt-controller@32e2d000 {
+				compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x32e2d000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+				clock-names = "ipg";
+				fsl,channel = <0>;
+				fsl,num-irqs = <64>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gpu: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x40000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+			         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+			         <&clk IMX8MQ_CLK_GPU_AXI>,
+			         <&clk IMX8MQ_CLK_GPU_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
+			assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
+			                  <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
+			                  <&clk IMX8MQ_CLK_GPU_AXI>,
+			                  <&clk IMX8MQ_CLK_GPU_AHB>,
+			                  <&clk IMX8MQ_GPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL>;
+			assigned-clock-rates = <800000000>, <800000000>,
+			                       <800000000>, <800000000>, <0>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		usb_dwc3_0: usb@38100000 {
+			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+			reg = <0x38100000 0x10000>;
+			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
+			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
+				 <&clk IMX8MQ_CLK_32K>;
+			clock-names = "bus_early", "ref", "suspend";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+			                         <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <500000000>, <100000000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy0>, <&usb3_phy0>;
+			phy-names = "usb2-phy", "usb3-phy";
+			power-domains = <&pgc_otg1>;
+			usb3-resume-missing-cas;
+			status = "disabled";
+		};
+
+		usb3_phy0: usb-phy@381f0040 {
+			compatible = "fsl,imx8mq-usb-phy";
+			reg = <0x381f0040 0x40>;
+			clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <100000000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb_dwc3_1: usb@38200000 {
+			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+			reg = <0x38200000 0x10000>;
+			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
+			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
+				 <&clk IMX8MQ_CLK_32K>;
+			clock-names = "bus_early", "ref", "suspend";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+			                         <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <500000000>, <100000000>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy1>, <&usb3_phy1>;
+			phy-names = "usb2-phy", "usb3-phy";
+			power-domains = <&pgc_otg2>;
+			usb3-resume-missing-cas;
+			status = "disabled";
+		};
+
+		usb3_phy1: usb-phy@382f0040 {
+			compatible = "fsl,imx8mq-usb-phy";
+			reg = <0x382f0040 0x40>;
+			clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <100000000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		vpu: video-codec@38300000 {
+			compatible = "nxp,imx8mq-vpu";
+			reg = <0x38300000 0x10000>,
+			      <0x38310000 0x10000>,
+			      <0x38320000 0x10000>;
+			reg-names = "g1", "g2", "ctrl";
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g1", "g2";
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
+			clock-names = "g1", "g2", "bus";
+			assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+					  <&clk IMX8MQ_CLK_VPU_G2>,
+					  <&clk IMX8MQ_CLK_VPU_BUS>,
+					  <&clk IMX8MQ_VPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+						 <&clk IMX8MQ_VPU_PLL_OUT>,
+						 <&clk IMX8MQ_SYS1_PLL_800M>,
+						 <&clk IMX8MQ_VPU_PLL>;
+			assigned-clock-rates = <600000000>, <600000000>,
+					       <800000000>, <0>;
+			power-domains = <&pgc_vpu>;
+		};
+
+		pcie0: pcie@33800000 {
+			compatible = "fsl,imx8mq-pcie";
+			reg = <0x33800000 0x400000>,
+			      <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
+			          0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY>,
+			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			status = "disabled";
+		};
+
+		pcie1: pcie@33c00000 {
+			compatible = "fsl,imx8mq-pcie";
+			reg = <0x33c00000 0x400000>,
+			      <0x27f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges =  <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */
+				   0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,	/* GIC Dist */
+			      <0x38880000 0xc0000>,	/* GICR */
+			      <0x31000000 0x2000>,	/* GICC */
+			      <0x31010000 0x2000>,	/* GICV */
+			      <0x31020000 0x2000>;	/* GICH */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
+				 <&clk IMX8MQ_DRAM_PLL_OUT>,
+				 <&clk IMX8MQ_CLK_DRAM_ALT>,
+				 <&clk IMX8MQ_CLK_DRAM_APB>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8qm-cgtqmx8.dts b/roms/u-boot/arch/arm/dts/imx8qm-cgtqmx8.dts
new file mode 100644
index 000000000..555c357f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8qm-cgtqmx8.dts
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ * Copyright 2017 congatec AG
+ * Copyright (C) 2019 Oliver Graute <oliver.graute@kococonnector.com>
+ */
+
+/dts-v1/;
+
+/* First 128KB is for PSCI ATF. */
+/memreserve/ 0x80000000 0x00020000;
+
+#include "fsl-imx8qm.dtsi"
+
+/ {
+	model = "Congatec QMX8 Qseven series";
+	compatible = "fsl,imx8qm-qmx8", "fsl,imx8qm";
+
+	chosen {
+		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
+		stdout-path = &lpuart0;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usdhc2_vmmc: usdhc2_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "sw-3p3-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			off-on-delay-us = <3000>;
+		};
+
+		reg_usdhc3_vmmc: usdhc3_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "sw-3p3-sd2";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			off-on-delay-us = <3000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	fsl,rgmii_txc_dly;
+	fsl,rgmii_rxc_dly;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@6 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <6>;
+			at803x,eee-disabled;
+			at803x,vddio-1p8v;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc_ext: m41t62@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	wm8904: wm8904@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+
+		clocks = <&clk IMX8QM_AUD_MCLKOUT0>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		/* power-domains = <&pd_mclk_out0>; */
+
+		assigned-clocks = <&clk IMX8QM_AUD_PLL0_DIV>,
+				<&clk IMX8QM_AUD_ACM_AUD_PLL_CLK0_DIV>,
+				<&clk IMX8QM_AUD_ACM_AUD_REC_CLK0_DIV>,
+				<&clk IMX8QM_AUD_MCLKOUT0>;
+
+		assigned-clock-rates = <786432000>, <49152000>, <24576000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx8qm-qmx8 {
+
+		pinctrl_hog: hoggrp{
+			fsl,pins = <
+				SC_P_M40_GPIO0_01_LSIO_GPIO0_IO09		0x00000021
+				SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04		0x00000021
+				SC_P_M40_GPIO0_00_LSIO_GPIO0_IO08		0x00000021
+				SC_P_ESAI1_SCKT_LSIO_GPIO2_IO07			0x00000021
+				SC_P_SPDIF0_TX_LSIO_GPIO2_IO15			0x00000021
+				SC_P_FLEXCAN1_RX_LSIO_GPIO3_IO31		0x00000021
+				SC_P_ESAI1_TX0_LSIO_GPIO2_IO08			0x00000021
+				SC_P_FLEXCAN1_TX_LSIO_GPIO4_IO00		0x00000021
+				SC_P_ESAI1_TX1_LSIO_GPIO2_IO09			0x00000021
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x06000020
+				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x06000020
+				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x06000020
+				SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x06000020
+				SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x06000020
+				SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x06000020
+				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x06000020
+				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x06000020
+				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x06000020
+				SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x06000020
+			>;
+		};
+
+		pinctrl_lpi2c0: lpi2c0grp {
+			fsl,pins = <
+				SC_P_HDMI_TX0_TS_SCL_DMA_I2C0_SCL	0xc600004c
+				SC_P_HDMI_TX0_TS_SDA_DMA_I2C0_SDA	0xc600004c
+			>;
+		};
+
+		pinctrl_lpi2c1: lpi2c1grp {
+			fsl,pins = <
+				SC_P_GPT0_CLK_DMA_I2C1_SCL		0xc600004c
+				SC_P_GPT0_CAPTURE_DMA_I2C1_SDA		0xc600004c
+			>;
+		};
+
+		pinctrl_lpuart0: lpuart0grp {
+			fsl,pins = <
+				SC_P_UART0_RX_DMA_UART0_RX		0x06000020
+				SC_P_UART0_TX_DMA_UART0_TX		0x06000020
+			>;
+		};
+
+		pinctrl_lpuart1: lpuart1grp {
+			fsl,pins = <
+				SC_P_UART1_RX_DMA_UART1_RX		0x06000020
+				SC_P_UART1_TX_DMA_UART1_TX		0x06000020
+				SC_P_UART1_CTS_B_DMA_UART1_CTS_B	0x06000020
+				SC_P_UART1_RTS_B_DMA_UART1_RTS_B	0x06000020
+			>;
+		};
+
+		pinctrl_lpuart3: lpuart3grp {
+			fsl,pins = <
+				SC_P_M41_GPIO0_00_DMA_UART3_RX		0x06000020
+				SC_P_M41_GPIO0_01_DMA_UART3_TX		0x06000020
+			>;
+		};
+
+		pinctrl_mlb: mlbgrp {
+			fsl,pins = <
+				SC_P_MLB_SIG_CONN_MLB_SIG		0x21
+				SC_P_MLB_CLK_CONN_MLB_CLK		0x21
+				SC_P_MLB_DATA_CONN_MLB_DATA		0x21
+			>;
+		};
+
+		pinctrl_isl29023: isl29023grp {
+			fsl,pins = <
+				SC_P_ADC_IN2_LSIO_GPIO3_IO20		0x00000021
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc2_gpio: usdhc2grpgpio {
+			fsl,pins = <
+				SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021
+				SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021
+				SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc3_gpio: usdhc3grpgpio {
+			fsl,pins = <
+				SC_P_USDHC2_RESET_B_LSIO_GPIO4_IO09	0x00000021
+				SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				SC_P_USDHC2_CLK_CONN_USDHC2_CLK		0x06000041
+				SC_P_USDHC2_CMD_CONN_USDHC2_CMD		0x00000021
+				SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0	0x00000021
+				SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1	0x00000021
+				SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2	0x00000021
+				SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3	0x00000021
+				SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				SC_P_USDHC2_CLK_CONN_USDHC2_CLK		0x06000040
+				SC_P_USDHC2_CMD_CONN_USDHC2_CMD		0x00000020
+				SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0	0x00000020
+				SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1	0x00000020
+				SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2	0x00000020
+				SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3	0x00000020
+				SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				SC_P_USDHC2_CLK_CONN_USDHC2_CLK		0x06000040
+				SC_P_USDHC2_CMD_CONN_USDHC2_CMD		0x00000020
+				SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0	0x00000020
+				SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1	0x00000020
+				SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2	0x00000020
+				SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3	0x00000020
+				SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT	0x00000020
+			>;
+		};
+	};
+};
+
+&lpuart0 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lpuart1 { /* Q7 connector */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&pd_dma_lpuart0 {
+	debug_console;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	fsl,tuning-start-tap = <20>;
+	fsl,tuning-step= <2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	fsl,tuning-start-tap = <20>;
+	fsl,tuning-step= <2>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8qm-rom7720-a1.dts b/roms/u-boot/arch/arm/dts/imx8qm-rom7720-a1.dts
new file mode 100644
index 000000000..d1f2fff86
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8qm-rom7720-a1.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier:	GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+/dts-v1/;
+
+/* First 128KB is for PSCI ATF. */
+/memreserve/ 0x80000000 0x00020000;
+
+#include "fsl-imx8qm.dtsi"
+
+/ {
+	model = "Advantech iMX8QM Qseven series";
+	compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
+
+	chosen {
+		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
+		stdout-path = &lpuart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		user {
+			label = "heartbeat";
+			gpios = <&gpio2 15 0>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usdhc2_vmmc: usdhc2_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "sw-3p3-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	imx8qm-mek {
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03	0x06000048
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD	0x000014a0
+				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000048
+				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000048
+				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000060
+				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000060
+				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000060
+				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000060
+				SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000060
+				SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000060
+				SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000060
+				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000060
+				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000060
+				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000060
+				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000060
+				SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000060
+			>;
+		};
+
+		pinctrl_fec2: fec2grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD	0x000014a0
+				SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL	0x00000060
+				SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC	0x00000060
+				SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0	0x00000060
+				SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1	0x00000060
+				SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2	0x00000060
+				SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3	0x00000060
+				SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC	0x00000060
+				SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL	0x00000060
+				SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0	0x00000060
+				SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1	0x00000060
+				SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2	0x00000060
+				SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3	0x00000060
+			>;
+		};
+
+		pinctrl_lpuart0: lpuart0grp {
+			fsl,pins = <
+				SC_P_UART0_RX_DMA_UART0_RX		0x06000020
+				SC_P_UART0_TX_DMA_UART0_TX		0x06000020
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x06000041
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x06000040
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x06000040
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc2_gpio: usdhc2grpgpio {
+			fsl,pins = <
+				SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021
+				SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021
+				SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040
+				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020
+				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020
+				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020
+				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020
+				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020
+				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				SC_P_USDHC2_CLK_CONN_USDHC2_CLK		0x06000041
+				SC_P_USDHC2_CMD_CONN_USDHC2_CMD		0x00000021
+				SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0	0x00000021
+				SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1	0x00000021
+				SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2	0x00000021
+				SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3	0x00000021
+				/* WP */
+				SC_P_USDHC2_WP_LSIO_GPIO4_IO11		0x00000021
+				/* CD */
+				SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12	0x00000021
+			>;
+		};
+
+		pinctrl_lpi2c1: lpi2c1grp {
+			fsl,pins = <
+				SC_P_GPT0_CLK_DMA_I2C1_SCL		0x06000020
+				SC_P_GPT0_CAPTURE_DMA_I2C1_SDA		0x06000020
+				/*
+				 * Change the default alt function from SCL/SDA to others,
+				 * to avoid select input conflict with GPT0
+				 */
+				SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03	0x0700004c
+				SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04	0x0700004c
+				SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05	0x0700004c
+				SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06	0x0700004c
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				SC_P_SPDIF0_TX_LSIO_GPIO2_IO15		0x00000021
+			>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,ar8031-phy-fixup;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,ar8031-phy-fixup;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	pca9557_a: gpio@18 {
+		compatible = "nxp,pca9557";
+		reg = <0x18>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9557_b: gpio@19 {
+		compatible = "nxp,pca9557";
+		reg = <0x19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9557_c: gpio@1b {
+		compatible = "nxp,pca9557";
+		reg = <0x1b>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9557_d: gpio@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lpuart1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
new file mode 100644
index 000000000..1cf58fc3f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Siemens AG
+ */
+
+&{/imx8qx-pm} {
+
+	u-boot,dm-spl;
+};
+
+&mu {
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pd_lsio {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio0 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio1 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio2 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio3 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio4 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio5 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio6 {
+	u-boot,dm-spl;
+};
+
+&pd_lsio_gpio7 {
+	u-boot,dm-spl;
+};
+
+&pd_dma {
+	u-boot,dm-spl;
+};
+
+&pd_dma_lpuart0 {
+	u-boot,dm-spl;
+};
+
+&pd_dma_lpuart2 {
+	u-boot,dm-spl;
+};
+
+&pd_conn {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch0 {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch1 {
+	u-boot,dm-spl;
+};
+
+&pd_conn_sdch2 {
+	u-boot,dm-spl;
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&gpio6 {
+	u-boot,dm-spl;
+};
+
+&gpio7 {
+	u-boot,dm-spl;
+};
+
+&lpuart0 {
+	u-boot,dm-spl;
+};
+
+&lpuart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imx8qxp-capricorn.dtsi b/roms/u-boot/arch/arm/dts/imx8qxp-capricorn.dtsi
new file mode 100644
index 000000000..db5653ea1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imx8qxp-capricorn.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017 NXP
+ *
+ * Copyright 2019 Siemens AG
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-imx8qxp.dtsi"
+#include "imx8qxp-capricorn-u-boot.dtsi"
+
+/ {
+	model = "Siemens Giedi";
+	compatible = "siemens,capricorn", "fsl,imx8qxp";
+
+	chosen {
+		bootargs = "console=ttyLP2,115200 earlycon=lpuart32,0x5a080000,115200";
+		stdout-path = &lpuart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		run {
+			label = "run";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		flt {
+			label = "flt";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		svc {
+			label = "svc";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		com1_tx {
+			label = "com1-tx";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		com1_rx {
+			label = "com1-rx";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		com2_tx {
+			label = "com2-tx";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		com2_rx {
+			label = "com2-rx";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		cloud {
+			label = "cloud";
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		dbg1 {
+			label = "dbg1";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		dbg2 {
+			label = "dbg2";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		dbg3 {
+			label = "dbg3";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		dbg4 {
+			label = "dbg4";
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	muxcgrp: imx8qxp-som {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+			SC_P_ESAI0_FST_LSIO_GPIO0_IO01		0x06000021
+			SC_P_ESAI0_TX0_LSIO_GPIO0_IO04		0x06000021
+			SC_P_SAI0_TXC_LSIO_GPIO0_IO26		0x06000021
+			SC_P_SAI1_RXD_LSIO_GPIO0_IO29		0x06000021
+			SC_P_FLEXCAN1_RX_LSIO_GPIO1_IO17	0x06000021
+			SC_P_FLEXCAN1_TX_LSIO_GPIO1_IO18	0x06000021
+			SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17	0x06000021
+			SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18	0x06000021
+			SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19	0x06000021
+			SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03	0x06000021
+			SC_P_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00	0x06000021
+			SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x06000021
+			SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09	0x06000021
+			>;
+		};
+
+		pinctrl_lpi2c0: lpi2c0grp {
+			fsl,pins = <
+			SC_P_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL	0x0C000020
+			SC_P_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA	0x0C000020
+			>;
+		};
+
+		pinctrl_lpi2c1: lpi2c1grp {
+			fsl,pins = <
+			SC_P_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL	0x0C000020
+			SC_P_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA	0x0C000020
+			>;
+		};
+
+		pinctrl_lpuart2: lpuart2grp {
+			fsl,pins = <
+				SC_P_UART2_RX_ADMA_UART2_RX	0x06000020
+				SC_P_UART2_TX_ADMA_UART2_TX	0x06000020
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x06000041
+				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+				SC_P_ENET0_RGMII_TXC_LSIO_GPIO4_IO29	0x06000021
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				SC_P_ENET0_RGMII_RXC_CONN_USDHC1_CLK	0x06000041
+				SC_P_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD	0x00000021
+				SC_P_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0	0x00000021
+				SC_P_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1	0x00000021
+				SC_P_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2	0x00000021
+				SC_P_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3	0x00000021
+				SC_P_ENET0_RGMII_TXD2_CONN_USDHC1_CD_B	0x06000021
+				//SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x06000021
+				SC_P_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30	0x06000021
+			>;
+		};
+
+		pinctrl_fec2: fec2grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD	0x000014a0
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD	0x000014a0
+				SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD		0x000514a0
+
+				SC_P_ENET0_MDC_CONN_ENET1_MDC                   0x00000060
+				SC_P_ENET0_MDIO_CONN_ENET1_MDIO                 0x00000060
+
+				SC_P_ESAI0_FSR_CONN_ENET1_RCLK50M_IN            0x00000060
+				SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0            0x00000060
+				SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1        0x00000060
+				SC_P_ESAI0_TX2_RX3_CONN_ENET1_RMII_RX_ER        0x00000060
+				SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL          0x00000060
+				SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0        0x00000060
+				SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1        0x00000060
+				SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL         0x00000060	/* ERST: Reset pin */
+			>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	clock-frequency=<52000000>;
+	no-1-8-v;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&fec1 {
+	status ="disabled";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rmii";
+
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imxrt1020-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
new file mode 100644
index 000000000..121665a2d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-spl;
+	};
+
+	clocks {
+		u-boot,dm-spl;
+	};
+
+	soc {
+		u-boot,dm-spl;
+	};
+};
+
+&osc {
+	u-boot,dm-spl;
+};
+
+&clks {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&gpt1 {
+	u-boot,dm-spl;
+};
+
+&lpuart1 { /* console */
+	u-boot,dm-spl;
+};
+
+&semc {
+	u-boot,dm-spl;
+
+	bank1: bank@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+
+	imxrt1020-evk {
+		u-boot,dm-spl;
+		pinctrl_lpuart1: lpuart1grp {
+			u-boot,dm-spl;
+		};
+
+		pinctrl_semc: semcgrp {
+			u-boot,dm-spl;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imxrt1020-evk.dts b/roms/u-boot/arch/arm/dts/imxrt1020-evk.dts
new file mode 100644
index 000000000..2da79e5c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imxrt1020-evk.dts
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1020.dtsi"
+#include "imxrt1020-evk-u-boot.dtsi"
+#include <dt-bindings/pinctrl/pins-imxrt1020.h>
+
+/ {
+	model = "NXP IMXRT1020-evk board";
+	compatible = "fsl,imxrt1020-evk", "fsl,imxrt1020";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+		tick-timer = &gpt1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x2000000>;
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&semc {
+	/*
+	 * Memory configuration from sdram datasheet IS42S16160J-6TLI
+	 */
+	fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
+				MUX_CSX0_SDRAM_CS1
+				0
+				0
+				0
+				0>;
+	fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
+					BL_8
+					COL_9BITS
+					CL_3>;
+	fsl,sdram-timing = /bits/ 8 <0x2
+				     0x2
+				     0x9
+				     0x1
+				     0x5
+				     0x6
+
+				     0x20
+				     0x09
+				     0x01
+				     0x00
+
+				     0x04
+				     0x0A
+				     0x21
+				     0x50>;
+
+	bank1: bank@0 {
+		fsl,base-address = <0x80000000>;
+		fsl,memory-size = <MEM_SIZE_32M>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+
+	imxrt1020-evk {
+		pinctrl_lpuart1: lpuart1grp {
+			fsl,pins = <
+				MXRT1020_IOMUXC_GPIO_AD_B0_06_LPUART1_TX
+					0xf1
+				MXRT1020_IOMUXC_GPIO_AD_B0_07_LPUART1_RX
+					0xf1
+			>;
+		};
+
+		pinctrl_semc: semcgrp {
+			fsl,pins = <
+				MXRT1020_IOMUXC_GPIO_EMC_00_SEMC_DA00
+					0xf1	/* SEMC_D0 */
+				MXRT1020_IOMUXC_GPIO_EMC_01_SEMC_DA01
+					0xf1	/* SEMC_D1 */
+				MXRT1020_IOMUXC_GPIO_EMC_02_SEMC_DA02
+					0xf1	/* SEMC_D2 */
+				MXRT1020_IOMUXC_GPIO_EMC_03_SEMC_DA03
+					0xf1	/* SEMC_D3 */
+				MXRT1020_IOMUXC_GPIO_EMC_04_SEMC_DA04
+					0xf1	/* SEMC_D4 */
+				MXRT1020_IOMUXC_GPIO_EMC_05_SEMC_DA05
+					0xf1	/* SEMC_D5 */
+				MXRT1020_IOMUXC_GPIO_EMC_06_SEMC_DA06
+					0xf1	/* SEMC_D6 */
+				MXRT1020_IOMUXC_GPIO_EMC_07_SEMC_DA07
+					0xf1	/* SEMC_D7 */
+				MXRT1020_IOMUXC_GPIO_EMC_08_SEMC_DM00
+					0xf1	/* SEMC_DM0 */
+				MXRT1020_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
+					0xf1	/* SEMC_A0 */
+				MXRT1020_IOMUXC_GPIO_EMC_10_SEMC_CAS
+					0xf1	/* SEMC_CAS */
+				MXRT1020_IOMUXC_GPIO_EMC_11_SEMC_RAS
+					0xf1	/* SEMC_RAS */
+				MXRT1020_IOMUXC_GPIO_EMC_12_SEMC_CS0
+					0xf1	/* SEMC_CS0 */
+				MXRT1020_IOMUXC_GPIO_EMC_13_SEMC_BA0
+					0xf1	/* SEMC_BA0 */
+				MXRT1020_IOMUXC_GPIO_EMC_14_SEMC_BA1
+					0xf1	/* SEMC_BA1 */
+				MXRT1020_IOMUXC_GPIO_EMC_15_SEMC_ADDR10
+					0xf1	/* SEMC_A10 */
+				MXRT1020_IOMUXC_GPIO_EMC_16_SEMC_ADDR00
+					0xf1	/* SEMC_A0 */
+				MXRT1020_IOMUXC_GPIO_EMC_17_SEMC_ADDR01
+					0xf1	/* SEMC_A1 */
+				MXRT1020_IOMUXC_GPIO_EMC_18_SEMC_ADDR02
+					0xf1	/* SEMC_A2 */
+				MXRT1020_IOMUXC_GPIO_EMC_19_SEMC_ADDR03
+					0xf1	/* SEMC_A3 */
+				MXRT1020_IOMUXC_GPIO_EMC_20_SEMC_ADDR04
+					0xf1	/* SEMC_A4 */
+				MXRT1020_IOMUXC_GPIO_EMC_21_SEMC_ADDR05
+					0xf1	/* SEMC_A5 */
+				MXRT1020_IOMUXC_GPIO_EMC_22_SEMC_ADDR06
+					0xf1	/* SEMC_A6 */
+				MXRT1020_IOMUXC_GPIO_EMC_23_SEMC_ADDR07
+					0xf1	/* SEMC_A7 */
+				MXRT1020_IOMUXC_GPIO_EMC_24_SEMC_ADDR08
+					0xf1	/* SEMC_A8 */
+				MXRT1020_IOMUXC_GPIO_EMC_25_SEMC_ADDR09
+					0xf1	/* SEMC_A9 */
+				MXRT1020_IOMUXC_GPIO_EMC_26_SEMC_ADDR11
+					0xf1	/* SEMC_A11 */
+				MXRT1020_IOMUXC_GPIO_EMC_27_SEMC_ADDR12
+					0xf1	/* SEMC_A12 */
+				MXRT1020_IOMUXC_GPIO_EMC_28_SEMC_DQS
+					(IMX_PAD_SION | 0xf1)	/* SEMC_DQS */
+				MXRT1020_IOMUXC_GPIO_EMC_29_SEMC_CKE
+					0xf1	/* SEMC_CKE */
+				MXRT1020_IOMUXC_GPIO_EMC_30_SEMC_CLK
+					0xf1	/* SEMC_CLK */
+				MXRT1020_IOMUXC_GPIO_EMC_31_SEMC_DM01
+					0xf1	/* SEMC_DM01 */
+				MXRT1020_IOMUXC_GPIO_EMC_32_SEMC_DATA08
+					0xf1	/* SEMC_D8 */
+				MXRT1020_IOMUXC_GPIO_EMC_33_SEMC_DATA09
+					0xf1	/* SEMC_D9 */
+				MXRT1020_IOMUXC_GPIO_EMC_34_SEMC_DATA10
+					0xf1	/* SEMC_D10 */
+				MXRT1020_IOMUXC_GPIO_EMC_35_SEMC_DATA11
+					0xf1	/* SEMC_D11 */
+				MXRT1020_IOMUXC_GPIO_EMC_36_SEMC_DATA12
+					0xf1	/* SEMC_D12 */
+				MXRT1020_IOMUXC_GPIO_EMC_37_SEMC_DATA13
+					0xf1	/* SEMC_D13 */
+				MXRT1020_IOMUXC_GPIO_EMC_38_SEMC_DATA14
+					0xf1	/* SEMC_D14 */
+				MXRT1020_IOMUXC_GPIO_EMC_39_SEMC_DATA15
+					0xf1	/* SEMC_D15 */
+			>;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			fsl,pins = <
+				MXRT1020_IOMUXC_GPIO_SD_B0_06_USDHC1_CD_B
+					0x1B000
+				MXRT1020_IOMUXC_GPIO_SD_B0_02_USDHC1_CMD
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_03_USDHC1_CLK
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0
+					0x17061
+			>;
+		};
+	};
+};
+
+&gpt1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	status = "okay";
+
+	cd-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/roms/u-boot/arch/arm/dts/imxrt1020.dtsi b/roms/u-boot/arch/arm/dts/imxrt1020.dtsi
new file mode 100644
index 000000000..5ba314f99
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imxrt1020.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/imxrt1020-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/memory/imxrt-sdram.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		mmc0 = &usdhc1;
+		serial0 = &lpuart1;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc: osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		semc: semc@402f0000 {
+			compatible = "fsl,imxrt-semc";
+			reg = <0x402f0000 0x4000>;
+			clocks = <&clks IMXRT1020_CLK_SEMC>;
+			pinctrl-0 = <&pinctrl_semc>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		lpuart1: serial@40184000 {
+			compatible = "fsl,imxrt-lpuart";
+			reg = <0x40184000 0x4000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1020_CLK_LPUART1>;
+			clock-names = "per";
+			status = "disabled";
+		};
+
+		iomuxc: iomuxc@401f8000 {
+			compatible = "fsl,imxrt-iomuxc";
+			reg = <0x401f8000 0x4000>;
+			fsl,mux_mask = <0x7>;
+		};
+
+		clks: ccm@400fc000 {
+			compatible = "fsl,imxrt1020-ccm";
+			reg = <0x400fc000 0x4000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <1>;
+		};
+
+		usdhc1: usdhc@402c0000 {
+			compatible = "fsl,imxrt-usdhc";
+			reg = <0x402c0000 0x10000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1020_CLK_USDHC1>;
+			clock-names = "per";
+			bus-width = <4>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step= <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@401b8000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x401b8000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@401bc000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x401bc000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@401c0000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x401c0000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@400c0000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x400c0000 0x4000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpt1: gpt1@401ec000 {
+			compatible = "fsl,imxrt-gpt";
+			reg = <0x401ec000 0x4000>;
+			interrupts = <100>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/imxrt1050-evk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
new file mode 100644
index 000000000..3168c2df2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-spl;
+	};
+
+	clocks {
+		u-boot,dm-spl;
+	};
+
+	soc {
+		u-boot,dm-spl;
+	};
+};
+
+&osc {
+	u-boot,dm-spl;
+};
+
+&clks {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&gpt1 {
+	u-boot,dm-spl;
+};
+
+&lpuart1 { /* console */
+	u-boot,dm-spl;
+};
+
+&semc {
+	u-boot,dm-spl;
+
+	bank1: bank@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+
+	imxrt1050-evk {
+		u-boot,dm-spl;
+		pinctrl_lpuart1: lpuart1grp {
+			u-boot,dm-spl;
+		};
+
+		pinctrl_semc: semcgrp {
+			u-boot,dm-spl;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/imxrt1050-evk.dts b/roms/u-boot/arch/arm/dts/imxrt1050-evk.dts
new file mode 100644
index 000000000..324cf7af9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imxrt1050-evk.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1050.dtsi"
+#include "imxrt1050-evk-u-boot.dtsi"
+#include <dt-bindings/pinctrl/pins-imxrt1050.h>
+
+/ {
+	model = "NXP IMXRT1050-evk board";
+	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+		tick-timer = &gpt1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x2000000>;
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&semc {
+	/*
+	 * Memory configuration from sdram datasheet IS42S16160J-6BLI
+	 */
+	fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
+				MUX_CSX0_SDRAM_CS1
+				0
+				0
+				0
+				0>;
+	fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
+					BL_8
+					COL_9BITS
+					CL_3>;
+	fsl,sdram-timing = /bits/ 8 <0x2
+				     0x2
+				     0x9
+				     0x1
+				     0x5
+				     0x6
+
+				     0x20
+				     0x09
+				     0x01
+				     0x00
+
+				     0x04
+				     0x0A
+				     0x21
+				     0x50>;
+
+	bank1: bank@0 {
+		fsl,base-address = <0x80000000>;
+		fsl,memory-size = <MEM_SIZE_32M>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+
+	imxrt1050-evk {
+		pinctrl_lpuart1: lpuart1grp {
+			fsl,pins = <
+				MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
+					0xf1
+				MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
+					0xf1
+			>;
+		};
+
+		pinctrl_semc: semcgrp {
+			fsl,pins = <
+				MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
+					0xf1	/* SEMC_D0 */
+				MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
+					0xf1	/* SEMC_D1 */
+				MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
+					0xf1	/* SEMC_D2 */
+				MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
+					0xf1	/* SEMC_D3 */
+				MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
+					0xf1	/* SEMC_D4 */
+				MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
+					0xf1	/* SEMC_D5 */
+				MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
+					0xf1	/* SEMC_D6 */
+				MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
+					0xf1	/* SEMC_D7 */
+				MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
+					0xf1	/* SEMC_DM0 */
+				MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
+					0xf1	/* SEMC_A0 */
+				MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
+					0xf1	/* SEMC_A1 */
+				MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
+					0xf1	/* SEMC_A2 */
+				MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
+					0xf1	/* SEMC_A3 */
+				MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
+					0xf1	/* SEMC_A4 */
+				MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
+					0xf1	/* SEMC_A5 */
+				MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
+					0xf1	/* SEMC_A6 */
+				MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
+					0xf1	/* SEMC_A7 */
+				MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
+					0xf1	/* SEMC_A8 */
+				MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
+					0xf1	/* SEMC_A9 */
+				MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
+					0xf1	/* SEMC_A11 */
+				MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
+					0xf1	/* SEMC_A12 */
+				MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
+					0xf1	/* SEMC_BA0 */
+				MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
+					0xf1	/* SEMC_BA1 */
+				MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
+					0xf1	/* SEMC_A10 */
+				MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
+					0xf1	/* SEMC_CAS */
+				MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
+					0xf1	/* SEMC_RAS */
+				MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
+					0xf1	/* SEMC_CLK */
+				MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
+					0xf1	/* SEMC_CKE */
+				MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
+					0xf1	/* SEMC_WE */
+				MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
+					0xf1	/* SEMC_CS0 */
+				MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
+					0xf1	/* SEMC_D8 */
+				MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
+					0xf1	/* SEMC_D9 */
+				MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
+					0xf1	/* SEMC_D10 */
+				MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
+					0xf1	/* SEMC_D11 */
+				MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
+					0xf1	/* SEMC_D12 */
+				MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
+					0xf1	/* SEMC_D13 */
+				MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
+					0xf1	/* SEMC_D14 */
+				MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
+					0xf1	/* SEMC_D15 */
+				MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
+					0xf1	/* SEMC_DM1 */
+				MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
+					(IMX_PAD_SION | 0xf1)	/* SEMC_DQS */
+			>;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			fsl,pins = <
+				MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B
+					0x1B000
+				MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT
+					0xB069
+				MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0
+					0x17061
+			>;
+		};
+
+		pinctrl_lcdif: lcdifgrp {
+			fsl,pins = <
+				MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15		0x1b0b1
+				MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31		0x0b069
+				MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02	0x0b069
+			>;
+		};
+	};
+};
+
+&gpt1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	status = "okay";
+
+	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
+
+		display-timings {
+			timing0: timing0 {
+				clock-frequency = <9300000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <4>;
+				hfront-porch = <8>;
+				vback-porch = <4>;
+				vfront-porch = <8>;
+				hsync-len = <41>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/imxrt1050.dtsi b/roms/u-boot/arch/arm/dts/imxrt1050.dtsi
new file mode 100644
index 000000000..6560a3827
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/imxrt1050.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/memory/imxrt-sdram.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		display0 = &lcdif;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		mmc0 = &usdhc1;
+		serial0 = &lpuart1;
+		usbphy0 = &usbphy1;
+	};
+
+	clocks {
+		osc: osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		semc: semc@402f0000 {
+			compatible = "fsl,imxrt-semc";
+			reg = <0x402f0000 0x4000>;
+			clocks = <&clks IMXRT1050_CLK_SEMC>;
+			pinctrl-0 = <&pinctrl_semc>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		lpuart1: serial@40184000 {
+			compatible = "fsl,imxrt-lpuart";
+			reg = <0x40184000 0x4000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1050_CLK_LPUART1>;
+			clock-names = "per";
+			status = "disabled";
+		};
+
+		iomuxc: iomuxc@401f8000 {
+			compatible = "fsl,imxrt-iomuxc";
+			reg = <0x401f8000 0x4000>;
+			fsl,mux_mask = <0x7>;
+		};
+
+		clks: ccm@400fc000 {
+			compatible = "fsl,imxrt1050-ccm";
+			reg = <0x400fc000 0x4000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <1>;
+		};
+
+		usdhc1: usdhc@402c0000 {
+			compatible = "fsl,imxrt-usdhc";
+			reg = <0x402c0000 0x10000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1050_CLK_USDHC1>;
+			clock-names = "per";
+			bus-width = <4>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step= <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@401b8000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x401b8000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@401bc000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x401bc000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@401c0000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x401c0000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@401c4000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x401c4000 0x4000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@400c0000 {
+			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			reg = <0x400c0000 0x4000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lcdif: lcdif@402b8000 {
+			compatible = "fsl,imxrt-lcdif";
+			reg = <0x402b8000 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
+				 <&clks IMXRT1050_CLK_LCDIF_APB>;
+			clock-names = "pix", "axi";
+			assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
+			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
+			status = "disabled";
+		};
+
+		gpt1: gpt1@401ec000 {
+			compatible = "fsl,imxrt-gpt";
+			reg = <0x401ec000 0x4000>;
+			interrupts = <100>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		usbphy1: usbphy@400d9000 {
+			compatible = "fsl,imxrt-usbphy";
+			reg = <0x400d9000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usbmisc: usbmisc@402e0800 {
+			#index-cells = <1>;
+			compatible = "fsl,imxrt-usbmisc";
+			reg = <0x402e0800 0x200>;
+			clocks = <&clks IMXRT1050_CLK_USBOH3>;
+		};
+
+		usbotg1: usb@402e0000 {
+			compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
+			reg = <0x402e0000 0x200>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1050_CLK_USBOH3>;
+			fsl,usbphy = <&usbphy1>;
+			fsl,usbmisc = <&usbmisc 0>;
+			ahb-burst-config = <0x0>;
+			tx-burst-size-dword = <0x10>;
+			rx-burst-size-dword = <0x10>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/include/dt-bindings b/roms/u-boot/arch/arm/dts/include/dt-bindings
new file mode 120000
index 000000000..0cecb3d08
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../include/dt-bindings
\ No newline at end of file
diff --git a/roms/u-boot/arch/arm/dts/k3-am64-ddr.dtsi b/roms/u-boot/arch/arm/dts/k3-am64-ddr.dtsi
new file mode 100644
index 000000000..026a547f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am64-ddr.dtsi
@@ -0,0 +1,2205 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	memorycontroller: memorycontroller@f300000 {
+		compatible = "ti,am64-ddrss";
+		reg = <0x00 0x0f308000 0x00 0x4000>,
+		      <0x00 0x43014000 0x00 0x100>;
+		reg-names = "cfg", "ctrl_mmr_lp4";
+		power-domains = <&k3_pds 138 TI_SCI_PD_SHARED>,
+			<&k3_pds 55 TI_SCI_PD_SHARED>;
+		clocks = <&k3_clks 138 0>, <&k3_clks 16 4>;
+		ti,ddr-freq1 = <DDRSS_PLL_FREQUENCY_1>;
+		ti,ddr-freq2 = <DDRSS_PLL_FREQUENCY_2>;
+		ti,ddr-fhs-cnt = <DDRSS_PLL_FHS_CNT>;
+
+		u-boot,dm-spl;
+
+		ti,ctl-data = <
+			DDRSS_CTL_0_DATA
+			DDRSS_CTL_1_DATA
+			DDRSS_CTL_2_DATA
+			DDRSS_CTL_3_DATA
+			DDRSS_CTL_4_DATA
+			DDRSS_CTL_5_DATA
+			DDRSS_CTL_6_DATA
+			DDRSS_CTL_7_DATA
+			DDRSS_CTL_8_DATA
+			DDRSS_CTL_9_DATA
+			DDRSS_CTL_10_DATA
+			DDRSS_CTL_11_DATA
+			DDRSS_CTL_12_DATA
+			DDRSS_CTL_13_DATA
+			DDRSS_CTL_14_DATA
+			DDRSS_CTL_15_DATA
+			DDRSS_CTL_16_DATA
+			DDRSS_CTL_17_DATA
+			DDRSS_CTL_18_DATA
+			DDRSS_CTL_19_DATA
+			DDRSS_CTL_20_DATA
+			DDRSS_CTL_21_DATA
+			DDRSS_CTL_22_DATA
+			DDRSS_CTL_23_DATA
+			DDRSS_CTL_24_DATA
+			DDRSS_CTL_25_DATA
+			DDRSS_CTL_26_DATA
+			DDRSS_CTL_27_DATA
+			DDRSS_CTL_28_DATA
+			DDRSS_CTL_29_DATA
+			DDRSS_CTL_30_DATA
+			DDRSS_CTL_31_DATA
+			DDRSS_CTL_32_DATA
+			DDRSS_CTL_33_DATA
+			DDRSS_CTL_34_DATA
+			DDRSS_CTL_35_DATA
+			DDRSS_CTL_36_DATA
+			DDRSS_CTL_37_DATA
+			DDRSS_CTL_38_DATA
+			DDRSS_CTL_39_DATA
+			DDRSS_CTL_40_DATA
+			DDRSS_CTL_41_DATA
+			DDRSS_CTL_42_DATA
+			DDRSS_CTL_43_DATA
+			DDRSS_CTL_44_DATA
+			DDRSS_CTL_45_DATA
+			DDRSS_CTL_46_DATA
+			DDRSS_CTL_47_DATA
+			DDRSS_CTL_48_DATA
+			DDRSS_CTL_49_DATA
+			DDRSS_CTL_50_DATA
+			DDRSS_CTL_51_DATA
+			DDRSS_CTL_52_DATA
+			DDRSS_CTL_53_DATA
+			DDRSS_CTL_54_DATA
+			DDRSS_CTL_55_DATA
+			DDRSS_CTL_56_DATA
+			DDRSS_CTL_57_DATA
+			DDRSS_CTL_58_DATA
+			DDRSS_CTL_59_DATA
+			DDRSS_CTL_60_DATA
+			DDRSS_CTL_61_DATA
+			DDRSS_CTL_62_DATA
+			DDRSS_CTL_63_DATA
+			DDRSS_CTL_64_DATA
+			DDRSS_CTL_65_DATA
+			DDRSS_CTL_66_DATA
+			DDRSS_CTL_67_DATA
+			DDRSS_CTL_68_DATA
+			DDRSS_CTL_69_DATA
+			DDRSS_CTL_70_DATA
+			DDRSS_CTL_71_DATA
+			DDRSS_CTL_72_DATA
+			DDRSS_CTL_73_DATA
+			DDRSS_CTL_74_DATA
+			DDRSS_CTL_75_DATA
+			DDRSS_CTL_76_DATA
+			DDRSS_CTL_77_DATA
+			DDRSS_CTL_78_DATA
+			DDRSS_CTL_79_DATA
+			DDRSS_CTL_80_DATA
+			DDRSS_CTL_81_DATA
+			DDRSS_CTL_82_DATA
+			DDRSS_CTL_83_DATA
+			DDRSS_CTL_84_DATA
+			DDRSS_CTL_85_DATA
+			DDRSS_CTL_86_DATA
+			DDRSS_CTL_87_DATA
+			DDRSS_CTL_88_DATA
+			DDRSS_CTL_89_DATA
+			DDRSS_CTL_90_DATA
+			DDRSS_CTL_91_DATA
+			DDRSS_CTL_92_DATA
+			DDRSS_CTL_93_DATA
+			DDRSS_CTL_94_DATA
+			DDRSS_CTL_95_DATA
+			DDRSS_CTL_96_DATA
+			DDRSS_CTL_97_DATA
+			DDRSS_CTL_98_DATA
+			DDRSS_CTL_99_DATA
+			DDRSS_CTL_100_DATA
+			DDRSS_CTL_101_DATA
+			DDRSS_CTL_102_DATA
+			DDRSS_CTL_103_DATA
+			DDRSS_CTL_104_DATA
+			DDRSS_CTL_105_DATA
+			DDRSS_CTL_106_DATA
+			DDRSS_CTL_107_DATA
+			DDRSS_CTL_108_DATA
+			DDRSS_CTL_109_DATA
+			DDRSS_CTL_110_DATA
+			DDRSS_CTL_111_DATA
+			DDRSS_CTL_112_DATA
+			DDRSS_CTL_113_DATA
+			DDRSS_CTL_114_DATA
+			DDRSS_CTL_115_DATA
+			DDRSS_CTL_116_DATA
+			DDRSS_CTL_117_DATA
+			DDRSS_CTL_118_DATA
+			DDRSS_CTL_119_DATA
+			DDRSS_CTL_120_DATA
+			DDRSS_CTL_121_DATA
+			DDRSS_CTL_122_DATA
+			DDRSS_CTL_123_DATA
+			DDRSS_CTL_124_DATA
+			DDRSS_CTL_125_DATA
+			DDRSS_CTL_126_DATA
+			DDRSS_CTL_127_DATA
+			DDRSS_CTL_128_DATA
+			DDRSS_CTL_129_DATA
+			DDRSS_CTL_130_DATA
+			DDRSS_CTL_131_DATA
+			DDRSS_CTL_132_DATA
+			DDRSS_CTL_133_DATA
+			DDRSS_CTL_134_DATA
+			DDRSS_CTL_135_DATA
+			DDRSS_CTL_136_DATA
+			DDRSS_CTL_137_DATA
+			DDRSS_CTL_138_DATA
+			DDRSS_CTL_139_DATA
+			DDRSS_CTL_140_DATA
+			DDRSS_CTL_141_DATA
+			DDRSS_CTL_142_DATA
+			DDRSS_CTL_143_DATA
+			DDRSS_CTL_144_DATA
+			DDRSS_CTL_145_DATA
+			DDRSS_CTL_146_DATA
+			DDRSS_CTL_147_DATA
+			DDRSS_CTL_148_DATA
+			DDRSS_CTL_149_DATA
+			DDRSS_CTL_150_DATA
+			DDRSS_CTL_151_DATA
+			DDRSS_CTL_152_DATA
+			DDRSS_CTL_153_DATA
+			DDRSS_CTL_154_DATA
+			DDRSS_CTL_155_DATA
+			DDRSS_CTL_156_DATA
+			DDRSS_CTL_157_DATA
+			DDRSS_CTL_158_DATA
+			DDRSS_CTL_159_DATA
+			DDRSS_CTL_160_DATA
+			DDRSS_CTL_161_DATA
+			DDRSS_CTL_162_DATA
+			DDRSS_CTL_163_DATA
+			DDRSS_CTL_164_DATA
+			DDRSS_CTL_165_DATA
+			DDRSS_CTL_166_DATA
+			DDRSS_CTL_167_DATA
+			DDRSS_CTL_168_DATA
+			DDRSS_CTL_169_DATA
+			DDRSS_CTL_170_DATA
+			DDRSS_CTL_171_DATA
+			DDRSS_CTL_172_DATA
+			DDRSS_CTL_173_DATA
+			DDRSS_CTL_174_DATA
+			DDRSS_CTL_175_DATA
+			DDRSS_CTL_176_DATA
+			DDRSS_CTL_177_DATA
+			DDRSS_CTL_178_DATA
+			DDRSS_CTL_179_DATA
+			DDRSS_CTL_180_DATA
+			DDRSS_CTL_181_DATA
+			DDRSS_CTL_182_DATA
+			DDRSS_CTL_183_DATA
+			DDRSS_CTL_184_DATA
+			DDRSS_CTL_185_DATA
+			DDRSS_CTL_186_DATA
+			DDRSS_CTL_187_DATA
+			DDRSS_CTL_188_DATA
+			DDRSS_CTL_189_DATA
+			DDRSS_CTL_190_DATA
+			DDRSS_CTL_191_DATA
+			DDRSS_CTL_192_DATA
+			DDRSS_CTL_193_DATA
+			DDRSS_CTL_194_DATA
+			DDRSS_CTL_195_DATA
+			DDRSS_CTL_196_DATA
+			DDRSS_CTL_197_DATA
+			DDRSS_CTL_198_DATA
+			DDRSS_CTL_199_DATA
+			DDRSS_CTL_200_DATA
+			DDRSS_CTL_201_DATA
+			DDRSS_CTL_202_DATA
+			DDRSS_CTL_203_DATA
+			DDRSS_CTL_204_DATA
+			DDRSS_CTL_205_DATA
+			DDRSS_CTL_206_DATA
+			DDRSS_CTL_207_DATA
+			DDRSS_CTL_208_DATA
+			DDRSS_CTL_209_DATA
+			DDRSS_CTL_210_DATA
+			DDRSS_CTL_211_DATA
+			DDRSS_CTL_212_DATA
+			DDRSS_CTL_213_DATA
+			DDRSS_CTL_214_DATA
+			DDRSS_CTL_215_DATA
+			DDRSS_CTL_216_DATA
+			DDRSS_CTL_217_DATA
+			DDRSS_CTL_218_DATA
+			DDRSS_CTL_219_DATA
+			DDRSS_CTL_220_DATA
+			DDRSS_CTL_221_DATA
+			DDRSS_CTL_222_DATA
+			DDRSS_CTL_223_DATA
+			DDRSS_CTL_224_DATA
+			DDRSS_CTL_225_DATA
+			DDRSS_CTL_226_DATA
+			DDRSS_CTL_227_DATA
+			DDRSS_CTL_228_DATA
+			DDRSS_CTL_229_DATA
+			DDRSS_CTL_230_DATA
+			DDRSS_CTL_231_DATA
+			DDRSS_CTL_232_DATA
+			DDRSS_CTL_233_DATA
+			DDRSS_CTL_234_DATA
+			DDRSS_CTL_235_DATA
+			DDRSS_CTL_236_DATA
+			DDRSS_CTL_237_DATA
+			DDRSS_CTL_238_DATA
+			DDRSS_CTL_239_DATA
+			DDRSS_CTL_240_DATA
+			DDRSS_CTL_241_DATA
+			DDRSS_CTL_242_DATA
+			DDRSS_CTL_243_DATA
+			DDRSS_CTL_244_DATA
+			DDRSS_CTL_245_DATA
+			DDRSS_CTL_246_DATA
+			DDRSS_CTL_247_DATA
+			DDRSS_CTL_248_DATA
+			DDRSS_CTL_249_DATA
+			DDRSS_CTL_250_DATA
+			DDRSS_CTL_251_DATA
+			DDRSS_CTL_252_DATA
+			DDRSS_CTL_253_DATA
+			DDRSS_CTL_254_DATA
+			DDRSS_CTL_255_DATA
+			DDRSS_CTL_256_DATA
+			DDRSS_CTL_257_DATA
+			DDRSS_CTL_258_DATA
+			DDRSS_CTL_259_DATA
+			DDRSS_CTL_260_DATA
+			DDRSS_CTL_261_DATA
+			DDRSS_CTL_262_DATA
+			DDRSS_CTL_263_DATA
+			DDRSS_CTL_264_DATA
+			DDRSS_CTL_265_DATA
+			DDRSS_CTL_266_DATA
+			DDRSS_CTL_267_DATA
+			DDRSS_CTL_268_DATA
+			DDRSS_CTL_269_DATA
+			DDRSS_CTL_270_DATA
+			DDRSS_CTL_271_DATA
+			DDRSS_CTL_272_DATA
+			DDRSS_CTL_273_DATA
+			DDRSS_CTL_274_DATA
+			DDRSS_CTL_275_DATA
+			DDRSS_CTL_276_DATA
+			DDRSS_CTL_277_DATA
+			DDRSS_CTL_278_DATA
+			DDRSS_CTL_279_DATA
+			DDRSS_CTL_280_DATA
+			DDRSS_CTL_281_DATA
+			DDRSS_CTL_282_DATA
+			DDRSS_CTL_283_DATA
+			DDRSS_CTL_284_DATA
+			DDRSS_CTL_285_DATA
+			DDRSS_CTL_286_DATA
+			DDRSS_CTL_287_DATA
+			DDRSS_CTL_288_DATA
+			DDRSS_CTL_289_DATA
+			DDRSS_CTL_290_DATA
+			DDRSS_CTL_291_DATA
+			DDRSS_CTL_292_DATA
+			DDRSS_CTL_293_DATA
+			DDRSS_CTL_294_DATA
+			DDRSS_CTL_295_DATA
+			DDRSS_CTL_296_DATA
+			DDRSS_CTL_297_DATA
+			DDRSS_CTL_298_DATA
+			DDRSS_CTL_299_DATA
+			DDRSS_CTL_300_DATA
+			DDRSS_CTL_301_DATA
+			DDRSS_CTL_302_DATA
+			DDRSS_CTL_303_DATA
+			DDRSS_CTL_304_DATA
+			DDRSS_CTL_305_DATA
+			DDRSS_CTL_306_DATA
+			DDRSS_CTL_307_DATA
+			DDRSS_CTL_308_DATA
+			DDRSS_CTL_309_DATA
+			DDRSS_CTL_310_DATA
+			DDRSS_CTL_311_DATA
+			DDRSS_CTL_312_DATA
+			DDRSS_CTL_313_DATA
+			DDRSS_CTL_314_DATA
+			DDRSS_CTL_315_DATA
+			DDRSS_CTL_316_DATA
+			DDRSS_CTL_317_DATA
+			DDRSS_CTL_318_DATA
+			DDRSS_CTL_319_DATA
+			DDRSS_CTL_320_DATA
+			DDRSS_CTL_321_DATA
+			DDRSS_CTL_322_DATA
+			DDRSS_CTL_323_DATA
+			DDRSS_CTL_324_DATA
+			DDRSS_CTL_325_DATA
+			DDRSS_CTL_326_DATA
+			DDRSS_CTL_327_DATA
+			DDRSS_CTL_328_DATA
+			DDRSS_CTL_329_DATA
+			DDRSS_CTL_330_DATA
+			DDRSS_CTL_331_DATA
+			DDRSS_CTL_332_DATA
+			DDRSS_CTL_333_DATA
+			DDRSS_CTL_334_DATA
+			DDRSS_CTL_335_DATA
+			DDRSS_CTL_336_DATA
+			DDRSS_CTL_337_DATA
+			DDRSS_CTL_338_DATA
+			DDRSS_CTL_339_DATA
+			DDRSS_CTL_340_DATA
+			DDRSS_CTL_341_DATA
+			DDRSS_CTL_342_DATA
+			DDRSS_CTL_343_DATA
+			DDRSS_CTL_344_DATA
+			DDRSS_CTL_345_DATA
+			DDRSS_CTL_346_DATA
+			DDRSS_CTL_347_DATA
+			DDRSS_CTL_348_DATA
+			DDRSS_CTL_349_DATA
+			DDRSS_CTL_350_DATA
+			DDRSS_CTL_351_DATA
+			DDRSS_CTL_352_DATA
+			DDRSS_CTL_353_DATA
+			DDRSS_CTL_354_DATA
+			DDRSS_CTL_355_DATA
+			DDRSS_CTL_356_DATA
+			DDRSS_CTL_357_DATA
+			DDRSS_CTL_358_DATA
+			DDRSS_CTL_359_DATA
+			DDRSS_CTL_360_DATA
+			DDRSS_CTL_361_DATA
+			DDRSS_CTL_362_DATA
+			DDRSS_CTL_363_DATA
+			DDRSS_CTL_364_DATA
+			DDRSS_CTL_365_DATA
+			DDRSS_CTL_366_DATA
+			DDRSS_CTL_367_DATA
+			DDRSS_CTL_368_DATA
+			DDRSS_CTL_369_DATA
+			DDRSS_CTL_370_DATA
+			DDRSS_CTL_371_DATA
+			DDRSS_CTL_372_DATA
+			DDRSS_CTL_373_DATA
+			DDRSS_CTL_374_DATA
+			DDRSS_CTL_375_DATA
+			DDRSS_CTL_376_DATA
+			DDRSS_CTL_377_DATA
+			DDRSS_CTL_378_DATA
+			DDRSS_CTL_379_DATA
+			DDRSS_CTL_380_DATA
+			DDRSS_CTL_381_DATA
+			DDRSS_CTL_382_DATA
+			DDRSS_CTL_383_DATA
+			DDRSS_CTL_384_DATA
+			DDRSS_CTL_385_DATA
+			DDRSS_CTL_386_DATA
+			DDRSS_CTL_387_DATA
+			DDRSS_CTL_388_DATA
+			DDRSS_CTL_389_DATA
+			DDRSS_CTL_390_DATA
+			DDRSS_CTL_391_DATA
+			DDRSS_CTL_392_DATA
+			DDRSS_CTL_393_DATA
+			DDRSS_CTL_394_DATA
+			DDRSS_CTL_395_DATA
+			DDRSS_CTL_396_DATA
+			DDRSS_CTL_397_DATA
+			DDRSS_CTL_398_DATA
+			DDRSS_CTL_399_DATA
+			DDRSS_CTL_400_DATA
+			DDRSS_CTL_401_DATA
+			DDRSS_CTL_402_DATA
+			DDRSS_CTL_403_DATA
+			DDRSS_CTL_404_DATA
+			DDRSS_CTL_405_DATA
+			DDRSS_CTL_406_DATA
+			DDRSS_CTL_407_DATA
+			DDRSS_CTL_408_DATA
+			DDRSS_CTL_409_DATA
+			DDRSS_CTL_410_DATA
+			DDRSS_CTL_411_DATA
+			DDRSS_CTL_412_DATA
+			DDRSS_CTL_413_DATA
+			DDRSS_CTL_414_DATA
+			DDRSS_CTL_415_DATA
+			DDRSS_CTL_416_DATA
+			DDRSS_CTL_417_DATA
+			DDRSS_CTL_418_DATA
+			DDRSS_CTL_419_DATA
+			DDRSS_CTL_420_DATA
+			DDRSS_CTL_421_DATA
+			DDRSS_CTL_422_DATA
+		>;
+
+		ti,pi-data = <
+			DDRSS_PI_0_DATA
+			DDRSS_PI_1_DATA
+			DDRSS_PI_2_DATA
+			DDRSS_PI_3_DATA
+			DDRSS_PI_4_DATA
+			DDRSS_PI_5_DATA
+			DDRSS_PI_6_DATA
+			DDRSS_PI_7_DATA
+			DDRSS_PI_8_DATA
+			DDRSS_PI_9_DATA
+			DDRSS_PI_10_DATA
+			DDRSS_PI_11_DATA
+			DDRSS_PI_12_DATA
+			DDRSS_PI_13_DATA
+			DDRSS_PI_14_DATA
+			DDRSS_PI_15_DATA
+			DDRSS_PI_16_DATA
+			DDRSS_PI_17_DATA
+			DDRSS_PI_18_DATA
+			DDRSS_PI_19_DATA
+			DDRSS_PI_20_DATA
+			DDRSS_PI_21_DATA
+			DDRSS_PI_22_DATA
+			DDRSS_PI_23_DATA
+			DDRSS_PI_24_DATA
+			DDRSS_PI_25_DATA
+			DDRSS_PI_26_DATA
+			DDRSS_PI_27_DATA
+			DDRSS_PI_28_DATA
+			DDRSS_PI_29_DATA
+			DDRSS_PI_30_DATA
+			DDRSS_PI_31_DATA
+			DDRSS_PI_32_DATA
+			DDRSS_PI_33_DATA
+			DDRSS_PI_34_DATA
+			DDRSS_PI_35_DATA
+			DDRSS_PI_36_DATA
+			DDRSS_PI_37_DATA
+			DDRSS_PI_38_DATA
+			DDRSS_PI_39_DATA
+			DDRSS_PI_40_DATA
+			DDRSS_PI_41_DATA
+			DDRSS_PI_42_DATA
+			DDRSS_PI_43_DATA
+			DDRSS_PI_44_DATA
+			DDRSS_PI_45_DATA
+			DDRSS_PI_46_DATA
+			DDRSS_PI_47_DATA
+			DDRSS_PI_48_DATA
+			DDRSS_PI_49_DATA
+			DDRSS_PI_50_DATA
+			DDRSS_PI_51_DATA
+			DDRSS_PI_52_DATA
+			DDRSS_PI_53_DATA
+			DDRSS_PI_54_DATA
+			DDRSS_PI_55_DATA
+			DDRSS_PI_56_DATA
+			DDRSS_PI_57_DATA
+			DDRSS_PI_58_DATA
+			DDRSS_PI_59_DATA
+			DDRSS_PI_60_DATA
+			DDRSS_PI_61_DATA
+			DDRSS_PI_62_DATA
+			DDRSS_PI_63_DATA
+			DDRSS_PI_64_DATA
+			DDRSS_PI_65_DATA
+			DDRSS_PI_66_DATA
+			DDRSS_PI_67_DATA
+			DDRSS_PI_68_DATA
+			DDRSS_PI_69_DATA
+			DDRSS_PI_70_DATA
+			DDRSS_PI_71_DATA
+			DDRSS_PI_72_DATA
+			DDRSS_PI_73_DATA
+			DDRSS_PI_74_DATA
+			DDRSS_PI_75_DATA
+			DDRSS_PI_76_DATA
+			DDRSS_PI_77_DATA
+			DDRSS_PI_78_DATA
+			DDRSS_PI_79_DATA
+			DDRSS_PI_80_DATA
+			DDRSS_PI_81_DATA
+			DDRSS_PI_82_DATA
+			DDRSS_PI_83_DATA
+			DDRSS_PI_84_DATA
+			DDRSS_PI_85_DATA
+			DDRSS_PI_86_DATA
+			DDRSS_PI_87_DATA
+			DDRSS_PI_88_DATA
+			DDRSS_PI_89_DATA
+			DDRSS_PI_90_DATA
+			DDRSS_PI_91_DATA
+			DDRSS_PI_92_DATA
+			DDRSS_PI_93_DATA
+			DDRSS_PI_94_DATA
+			DDRSS_PI_95_DATA
+			DDRSS_PI_96_DATA
+			DDRSS_PI_97_DATA
+			DDRSS_PI_98_DATA
+			DDRSS_PI_99_DATA
+			DDRSS_PI_100_DATA
+			DDRSS_PI_101_DATA
+			DDRSS_PI_102_DATA
+			DDRSS_PI_103_DATA
+			DDRSS_PI_104_DATA
+			DDRSS_PI_105_DATA
+			DDRSS_PI_106_DATA
+			DDRSS_PI_107_DATA
+			DDRSS_PI_108_DATA
+			DDRSS_PI_109_DATA
+			DDRSS_PI_110_DATA
+			DDRSS_PI_111_DATA
+			DDRSS_PI_112_DATA
+			DDRSS_PI_113_DATA
+			DDRSS_PI_114_DATA
+			DDRSS_PI_115_DATA
+			DDRSS_PI_116_DATA
+			DDRSS_PI_117_DATA
+			DDRSS_PI_118_DATA
+			DDRSS_PI_119_DATA
+			DDRSS_PI_120_DATA
+			DDRSS_PI_121_DATA
+			DDRSS_PI_122_DATA
+			DDRSS_PI_123_DATA
+			DDRSS_PI_124_DATA
+			DDRSS_PI_125_DATA
+			DDRSS_PI_126_DATA
+			DDRSS_PI_127_DATA
+			DDRSS_PI_128_DATA
+			DDRSS_PI_129_DATA
+			DDRSS_PI_130_DATA
+			DDRSS_PI_131_DATA
+			DDRSS_PI_132_DATA
+			DDRSS_PI_133_DATA
+			DDRSS_PI_134_DATA
+			DDRSS_PI_135_DATA
+			DDRSS_PI_136_DATA
+			DDRSS_PI_137_DATA
+			DDRSS_PI_138_DATA
+			DDRSS_PI_139_DATA
+			DDRSS_PI_140_DATA
+			DDRSS_PI_141_DATA
+			DDRSS_PI_142_DATA
+			DDRSS_PI_143_DATA
+			DDRSS_PI_144_DATA
+			DDRSS_PI_145_DATA
+			DDRSS_PI_146_DATA
+			DDRSS_PI_147_DATA
+			DDRSS_PI_148_DATA
+			DDRSS_PI_149_DATA
+			DDRSS_PI_150_DATA
+			DDRSS_PI_151_DATA
+			DDRSS_PI_152_DATA
+			DDRSS_PI_153_DATA
+			DDRSS_PI_154_DATA
+			DDRSS_PI_155_DATA
+			DDRSS_PI_156_DATA
+			DDRSS_PI_157_DATA
+			DDRSS_PI_158_DATA
+			DDRSS_PI_159_DATA
+			DDRSS_PI_160_DATA
+			DDRSS_PI_161_DATA
+			DDRSS_PI_162_DATA
+			DDRSS_PI_163_DATA
+			DDRSS_PI_164_DATA
+			DDRSS_PI_165_DATA
+			DDRSS_PI_166_DATA
+			DDRSS_PI_167_DATA
+			DDRSS_PI_168_DATA
+			DDRSS_PI_169_DATA
+			DDRSS_PI_170_DATA
+			DDRSS_PI_171_DATA
+			DDRSS_PI_172_DATA
+			DDRSS_PI_173_DATA
+			DDRSS_PI_174_DATA
+			DDRSS_PI_175_DATA
+			DDRSS_PI_176_DATA
+			DDRSS_PI_177_DATA
+			DDRSS_PI_178_DATA
+			DDRSS_PI_179_DATA
+			DDRSS_PI_180_DATA
+			DDRSS_PI_181_DATA
+			DDRSS_PI_182_DATA
+			DDRSS_PI_183_DATA
+			DDRSS_PI_184_DATA
+			DDRSS_PI_185_DATA
+			DDRSS_PI_186_DATA
+			DDRSS_PI_187_DATA
+			DDRSS_PI_188_DATA
+			DDRSS_PI_189_DATA
+			DDRSS_PI_190_DATA
+			DDRSS_PI_191_DATA
+			DDRSS_PI_192_DATA
+			DDRSS_PI_193_DATA
+			DDRSS_PI_194_DATA
+			DDRSS_PI_195_DATA
+			DDRSS_PI_196_DATA
+			DDRSS_PI_197_DATA
+			DDRSS_PI_198_DATA
+			DDRSS_PI_199_DATA
+			DDRSS_PI_200_DATA
+			DDRSS_PI_201_DATA
+			DDRSS_PI_202_DATA
+			DDRSS_PI_203_DATA
+			DDRSS_PI_204_DATA
+			DDRSS_PI_205_DATA
+			DDRSS_PI_206_DATA
+			DDRSS_PI_207_DATA
+			DDRSS_PI_208_DATA
+			DDRSS_PI_209_DATA
+			DDRSS_PI_210_DATA
+			DDRSS_PI_211_DATA
+			DDRSS_PI_212_DATA
+			DDRSS_PI_213_DATA
+			DDRSS_PI_214_DATA
+			DDRSS_PI_215_DATA
+			DDRSS_PI_216_DATA
+			DDRSS_PI_217_DATA
+			DDRSS_PI_218_DATA
+			DDRSS_PI_219_DATA
+			DDRSS_PI_220_DATA
+			DDRSS_PI_221_DATA
+			DDRSS_PI_222_DATA
+			DDRSS_PI_223_DATA
+			DDRSS_PI_224_DATA
+			DDRSS_PI_225_DATA
+			DDRSS_PI_226_DATA
+			DDRSS_PI_227_DATA
+			DDRSS_PI_228_DATA
+			DDRSS_PI_229_DATA
+			DDRSS_PI_230_DATA
+			DDRSS_PI_231_DATA
+			DDRSS_PI_232_DATA
+			DDRSS_PI_233_DATA
+			DDRSS_PI_234_DATA
+			DDRSS_PI_235_DATA
+			DDRSS_PI_236_DATA
+			DDRSS_PI_237_DATA
+			DDRSS_PI_238_DATA
+			DDRSS_PI_239_DATA
+			DDRSS_PI_240_DATA
+			DDRSS_PI_241_DATA
+			DDRSS_PI_242_DATA
+			DDRSS_PI_243_DATA
+			DDRSS_PI_244_DATA
+			DDRSS_PI_245_DATA
+			DDRSS_PI_246_DATA
+			DDRSS_PI_247_DATA
+			DDRSS_PI_248_DATA
+			DDRSS_PI_249_DATA
+			DDRSS_PI_250_DATA
+			DDRSS_PI_251_DATA
+			DDRSS_PI_252_DATA
+			DDRSS_PI_253_DATA
+			DDRSS_PI_254_DATA
+			DDRSS_PI_255_DATA
+			DDRSS_PI_256_DATA
+			DDRSS_PI_257_DATA
+			DDRSS_PI_258_DATA
+			DDRSS_PI_259_DATA
+			DDRSS_PI_260_DATA
+			DDRSS_PI_261_DATA
+			DDRSS_PI_262_DATA
+			DDRSS_PI_263_DATA
+			DDRSS_PI_264_DATA
+			DDRSS_PI_265_DATA
+			DDRSS_PI_266_DATA
+			DDRSS_PI_267_DATA
+			DDRSS_PI_268_DATA
+			DDRSS_PI_269_DATA
+			DDRSS_PI_270_DATA
+			DDRSS_PI_271_DATA
+			DDRSS_PI_272_DATA
+			DDRSS_PI_273_DATA
+			DDRSS_PI_274_DATA
+			DDRSS_PI_275_DATA
+			DDRSS_PI_276_DATA
+			DDRSS_PI_277_DATA
+			DDRSS_PI_278_DATA
+			DDRSS_PI_279_DATA
+			DDRSS_PI_280_DATA
+			DDRSS_PI_281_DATA
+			DDRSS_PI_282_DATA
+			DDRSS_PI_283_DATA
+			DDRSS_PI_284_DATA
+			DDRSS_PI_285_DATA
+			DDRSS_PI_286_DATA
+			DDRSS_PI_287_DATA
+			DDRSS_PI_288_DATA
+			DDRSS_PI_289_DATA
+			DDRSS_PI_290_DATA
+			DDRSS_PI_291_DATA
+			DDRSS_PI_292_DATA
+			DDRSS_PI_293_DATA
+			DDRSS_PI_294_DATA
+			DDRSS_PI_295_DATA
+			DDRSS_PI_296_DATA
+			DDRSS_PI_297_DATA
+			DDRSS_PI_298_DATA
+			DDRSS_PI_299_DATA
+			DDRSS_PI_300_DATA
+			DDRSS_PI_301_DATA
+			DDRSS_PI_302_DATA
+			DDRSS_PI_303_DATA
+			DDRSS_PI_304_DATA
+			DDRSS_PI_305_DATA
+			DDRSS_PI_306_DATA
+			DDRSS_PI_307_DATA
+			DDRSS_PI_308_DATA
+			DDRSS_PI_309_DATA
+			DDRSS_PI_310_DATA
+			DDRSS_PI_311_DATA
+			DDRSS_PI_312_DATA
+			DDRSS_PI_313_DATA
+			DDRSS_PI_314_DATA
+			DDRSS_PI_315_DATA
+			DDRSS_PI_316_DATA
+			DDRSS_PI_317_DATA
+			DDRSS_PI_318_DATA
+			DDRSS_PI_319_DATA
+			DDRSS_PI_320_DATA
+			DDRSS_PI_321_DATA
+			DDRSS_PI_321_DATA
+			DDRSS_PI_322_DATA
+			DDRSS_PI_323_DATA
+			DDRSS_PI_324_DATA
+			DDRSS_PI_325_DATA
+			DDRSS_PI_326_DATA
+			DDRSS_PI_327_DATA
+			DDRSS_PI_328_DATA
+			DDRSS_PI_329_DATA
+			DDRSS_PI_330_DATA
+			DDRSS_PI_331_DATA
+			DDRSS_PI_332_DATA
+			DDRSS_PI_333_DATA
+			DDRSS_PI_334_DATA
+			DDRSS_PI_335_DATA
+			DDRSS_PI_336_DATA
+			DDRSS_PI_337_DATA
+			DDRSS_PI_338_DATA
+			DDRSS_PI_339_DATA
+			DDRSS_PI_340_DATA
+			DDRSS_PI_341_DATA
+			DDRSS_PI_342_DATA
+			DDRSS_PI_343_DATA
+			DDRSS_PI_344_DATA
+		>;
+
+		ti,phy-data = <
+			DDRSS_PHY_0_DATA
+			DDRSS_PHY_1_DATA
+			DDRSS_PHY_2_DATA
+			DDRSS_PHY_3_DATA
+			DDRSS_PHY_4_DATA
+			DDRSS_PHY_5_DATA
+			DDRSS_PHY_6_DATA
+			DDRSS_PHY_7_DATA
+			DDRSS_PHY_8_DATA
+			DDRSS_PHY_9_DATA
+			DDRSS_PHY_10_DATA
+			DDRSS_PHY_11_DATA
+			DDRSS_PHY_12_DATA
+			DDRSS_PHY_13_DATA
+			DDRSS_PHY_14_DATA
+			DDRSS_PHY_15_DATA
+			DDRSS_PHY_16_DATA
+			DDRSS_PHY_17_DATA
+			DDRSS_PHY_18_DATA
+			DDRSS_PHY_19_DATA
+			DDRSS_PHY_20_DATA
+			DDRSS_PHY_21_DATA
+			DDRSS_PHY_22_DATA
+			DDRSS_PHY_23_DATA
+			DDRSS_PHY_24_DATA
+			DDRSS_PHY_25_DATA
+			DDRSS_PHY_26_DATA
+			DDRSS_PHY_27_DATA
+			DDRSS_PHY_28_DATA
+			DDRSS_PHY_29_DATA
+			DDRSS_PHY_30_DATA
+			DDRSS_PHY_31_DATA
+			DDRSS_PHY_32_DATA
+			DDRSS_PHY_33_DATA
+			DDRSS_PHY_34_DATA
+			DDRSS_PHY_35_DATA
+			DDRSS_PHY_36_DATA
+			DDRSS_PHY_37_DATA
+			DDRSS_PHY_38_DATA
+			DDRSS_PHY_39_DATA
+			DDRSS_PHY_40_DATA
+			DDRSS_PHY_41_DATA
+			DDRSS_PHY_42_DATA
+			DDRSS_PHY_43_DATA
+			DDRSS_PHY_44_DATA
+			DDRSS_PHY_45_DATA
+			DDRSS_PHY_46_DATA
+			DDRSS_PHY_47_DATA
+			DDRSS_PHY_48_DATA
+			DDRSS_PHY_49_DATA
+			DDRSS_PHY_50_DATA
+			DDRSS_PHY_51_DATA
+			DDRSS_PHY_52_DATA
+			DDRSS_PHY_53_DATA
+			DDRSS_PHY_54_DATA
+			DDRSS_PHY_55_DATA
+			DDRSS_PHY_56_DATA
+			DDRSS_PHY_57_DATA
+			DDRSS_PHY_58_DATA
+			DDRSS_PHY_59_DATA
+			DDRSS_PHY_60_DATA
+			DDRSS_PHY_61_DATA
+			DDRSS_PHY_62_DATA
+			DDRSS_PHY_63_DATA
+			DDRSS_PHY_64_DATA
+			DDRSS_PHY_65_DATA
+			DDRSS_PHY_66_DATA
+			DDRSS_PHY_67_DATA
+			DDRSS_PHY_68_DATA
+			DDRSS_PHY_69_DATA
+			DDRSS_PHY_70_DATA
+			DDRSS_PHY_71_DATA
+			DDRSS_PHY_72_DATA
+			DDRSS_PHY_73_DATA
+			DDRSS_PHY_74_DATA
+			DDRSS_PHY_75_DATA
+			DDRSS_PHY_76_DATA
+			DDRSS_PHY_77_DATA
+			DDRSS_PHY_78_DATA
+			DDRSS_PHY_79_DATA
+			DDRSS_PHY_80_DATA
+			DDRSS_PHY_81_DATA
+			DDRSS_PHY_82_DATA
+			DDRSS_PHY_83_DATA
+			DDRSS_PHY_84_DATA
+			DDRSS_PHY_85_DATA
+			DDRSS_PHY_86_DATA
+			DDRSS_PHY_87_DATA
+			DDRSS_PHY_88_DATA
+			DDRSS_PHY_89_DATA
+			DDRSS_PHY_90_DATA
+			DDRSS_PHY_91_DATA
+			DDRSS_PHY_92_DATA
+			DDRSS_PHY_93_DATA
+			DDRSS_PHY_94_DATA
+			DDRSS_PHY_95_DATA
+			DDRSS_PHY_96_DATA
+			DDRSS_PHY_97_DATA
+			DDRSS_PHY_98_DATA
+			DDRSS_PHY_99_DATA
+			DDRSS_PHY_100_DATA
+			DDRSS_PHY_101_DATA
+			DDRSS_PHY_102_DATA
+			DDRSS_PHY_103_DATA
+			DDRSS_PHY_104_DATA
+			DDRSS_PHY_105_DATA
+			DDRSS_PHY_106_DATA
+			DDRSS_PHY_107_DATA
+			DDRSS_PHY_108_DATA
+			DDRSS_PHY_109_DATA
+			DDRSS_PHY_110_DATA
+			DDRSS_PHY_111_DATA
+			DDRSS_PHY_112_DATA
+			DDRSS_PHY_113_DATA
+			DDRSS_PHY_114_DATA
+			DDRSS_PHY_115_DATA
+			DDRSS_PHY_116_DATA
+			DDRSS_PHY_117_DATA
+			DDRSS_PHY_118_DATA
+			DDRSS_PHY_119_DATA
+			DDRSS_PHY_120_DATA
+			DDRSS_PHY_121_DATA
+			DDRSS_PHY_122_DATA
+			DDRSS_PHY_123_DATA
+			DDRSS_PHY_124_DATA
+			DDRSS_PHY_125_DATA
+			DDRSS_PHY_126_DATA
+			DDRSS_PHY_127_DATA
+			DDRSS_PHY_128_DATA
+			DDRSS_PHY_129_DATA
+			DDRSS_PHY_130_DATA
+			DDRSS_PHY_131_DATA
+			DDRSS_PHY_132_DATA
+			DDRSS_PHY_133_DATA
+			DDRSS_PHY_134_DATA
+			DDRSS_PHY_135_DATA
+			DDRSS_PHY_136_DATA
+			DDRSS_PHY_137_DATA
+			DDRSS_PHY_138_DATA
+			DDRSS_PHY_139_DATA
+			DDRSS_PHY_140_DATA
+			DDRSS_PHY_141_DATA
+			DDRSS_PHY_142_DATA
+			DDRSS_PHY_143_DATA
+			DDRSS_PHY_144_DATA
+			DDRSS_PHY_145_DATA
+			DDRSS_PHY_146_DATA
+			DDRSS_PHY_147_DATA
+			DDRSS_PHY_148_DATA
+			DDRSS_PHY_149_DATA
+			DDRSS_PHY_150_DATA
+			DDRSS_PHY_151_DATA
+			DDRSS_PHY_152_DATA
+			DDRSS_PHY_153_DATA
+			DDRSS_PHY_154_DATA
+			DDRSS_PHY_155_DATA
+			DDRSS_PHY_156_DATA
+			DDRSS_PHY_157_DATA
+			DDRSS_PHY_158_DATA
+			DDRSS_PHY_159_DATA
+			DDRSS_PHY_160_DATA
+			DDRSS_PHY_161_DATA
+			DDRSS_PHY_162_DATA
+			DDRSS_PHY_163_DATA
+			DDRSS_PHY_164_DATA
+			DDRSS_PHY_165_DATA
+			DDRSS_PHY_166_DATA
+			DDRSS_PHY_167_DATA
+			DDRSS_PHY_168_DATA
+			DDRSS_PHY_169_DATA
+			DDRSS_PHY_170_DATA
+			DDRSS_PHY_171_DATA
+			DDRSS_PHY_172_DATA
+			DDRSS_PHY_173_DATA
+			DDRSS_PHY_174_DATA
+			DDRSS_PHY_175_DATA
+			DDRSS_PHY_176_DATA
+			DDRSS_PHY_177_DATA
+			DDRSS_PHY_178_DATA
+			DDRSS_PHY_179_DATA
+			DDRSS_PHY_180_DATA
+			DDRSS_PHY_181_DATA
+			DDRSS_PHY_182_DATA
+			DDRSS_PHY_183_DATA
+			DDRSS_PHY_184_DATA
+			DDRSS_PHY_185_DATA
+			DDRSS_PHY_186_DATA
+			DDRSS_PHY_187_DATA
+			DDRSS_PHY_188_DATA
+			DDRSS_PHY_189_DATA
+			DDRSS_PHY_190_DATA
+			DDRSS_PHY_191_DATA
+			DDRSS_PHY_192_DATA
+			DDRSS_PHY_193_DATA
+			DDRSS_PHY_194_DATA
+			DDRSS_PHY_195_DATA
+			DDRSS_PHY_196_DATA
+			DDRSS_PHY_197_DATA
+			DDRSS_PHY_198_DATA
+			DDRSS_PHY_199_DATA
+			DDRSS_PHY_200_DATA
+			DDRSS_PHY_201_DATA
+			DDRSS_PHY_202_DATA
+			DDRSS_PHY_203_DATA
+			DDRSS_PHY_204_DATA
+			DDRSS_PHY_205_DATA
+			DDRSS_PHY_206_DATA
+			DDRSS_PHY_207_DATA
+			DDRSS_PHY_208_DATA
+			DDRSS_PHY_209_DATA
+			DDRSS_PHY_210_DATA
+			DDRSS_PHY_211_DATA
+			DDRSS_PHY_212_DATA
+			DDRSS_PHY_213_DATA
+			DDRSS_PHY_214_DATA
+			DDRSS_PHY_215_DATA
+			DDRSS_PHY_216_DATA
+			DDRSS_PHY_217_DATA
+			DDRSS_PHY_218_DATA
+			DDRSS_PHY_219_DATA
+			DDRSS_PHY_220_DATA
+			DDRSS_PHY_221_DATA
+			DDRSS_PHY_222_DATA
+			DDRSS_PHY_223_DATA
+			DDRSS_PHY_224_DATA
+			DDRSS_PHY_225_DATA
+			DDRSS_PHY_226_DATA
+			DDRSS_PHY_227_DATA
+			DDRSS_PHY_228_DATA
+			DDRSS_PHY_229_DATA
+			DDRSS_PHY_230_DATA
+			DDRSS_PHY_231_DATA
+			DDRSS_PHY_232_DATA
+			DDRSS_PHY_233_DATA
+			DDRSS_PHY_234_DATA
+			DDRSS_PHY_235_DATA
+			DDRSS_PHY_236_DATA
+			DDRSS_PHY_237_DATA
+			DDRSS_PHY_238_DATA
+			DDRSS_PHY_239_DATA
+			DDRSS_PHY_240_DATA
+			DDRSS_PHY_241_DATA
+			DDRSS_PHY_242_DATA
+			DDRSS_PHY_243_DATA
+			DDRSS_PHY_244_DATA
+			DDRSS_PHY_245_DATA
+			DDRSS_PHY_246_DATA
+			DDRSS_PHY_247_DATA
+			DDRSS_PHY_248_DATA
+			DDRSS_PHY_249_DATA
+			DDRSS_PHY_250_DATA
+			DDRSS_PHY_251_DATA
+			DDRSS_PHY_252_DATA
+			DDRSS_PHY_253_DATA
+			DDRSS_PHY_254_DATA
+			DDRSS_PHY_255_DATA
+			DDRSS_PHY_256_DATA
+			DDRSS_PHY_257_DATA
+			DDRSS_PHY_258_DATA
+			DDRSS_PHY_259_DATA
+			DDRSS_PHY_260_DATA
+			DDRSS_PHY_261_DATA
+			DDRSS_PHY_262_DATA
+			DDRSS_PHY_263_DATA
+			DDRSS_PHY_264_DATA
+			DDRSS_PHY_265_DATA
+			DDRSS_PHY_266_DATA
+			DDRSS_PHY_267_DATA
+			DDRSS_PHY_268_DATA
+			DDRSS_PHY_269_DATA
+			DDRSS_PHY_270_DATA
+			DDRSS_PHY_271_DATA
+			DDRSS_PHY_272_DATA
+			DDRSS_PHY_273_DATA
+			DDRSS_PHY_274_DATA
+			DDRSS_PHY_275_DATA
+			DDRSS_PHY_276_DATA
+			DDRSS_PHY_277_DATA
+			DDRSS_PHY_278_DATA
+			DDRSS_PHY_279_DATA
+			DDRSS_PHY_280_DATA
+			DDRSS_PHY_281_DATA
+			DDRSS_PHY_282_DATA
+			DDRSS_PHY_283_DATA
+			DDRSS_PHY_284_DATA
+			DDRSS_PHY_285_DATA
+			DDRSS_PHY_286_DATA
+			DDRSS_PHY_287_DATA
+			DDRSS_PHY_288_DATA
+			DDRSS_PHY_289_DATA
+			DDRSS_PHY_290_DATA
+			DDRSS_PHY_291_DATA
+			DDRSS_PHY_292_DATA
+			DDRSS_PHY_293_DATA
+			DDRSS_PHY_294_DATA
+			DDRSS_PHY_295_DATA
+			DDRSS_PHY_296_DATA
+			DDRSS_PHY_297_DATA
+			DDRSS_PHY_298_DATA
+			DDRSS_PHY_299_DATA
+			DDRSS_PHY_300_DATA
+			DDRSS_PHY_301_DATA
+			DDRSS_PHY_302_DATA
+			DDRSS_PHY_303_DATA
+			DDRSS_PHY_304_DATA
+			DDRSS_PHY_305_DATA
+			DDRSS_PHY_306_DATA
+			DDRSS_PHY_307_DATA
+			DDRSS_PHY_308_DATA
+			DDRSS_PHY_309_DATA
+			DDRSS_PHY_310_DATA
+			DDRSS_PHY_311_DATA
+			DDRSS_PHY_312_DATA
+			DDRSS_PHY_313_DATA
+			DDRSS_PHY_314_DATA
+			DDRSS_PHY_315_DATA
+			DDRSS_PHY_316_DATA
+			DDRSS_PHY_317_DATA
+			DDRSS_PHY_318_DATA
+			DDRSS_PHY_319_DATA
+			DDRSS_PHY_320_DATA
+			DDRSS_PHY_321_DATA
+			DDRSS_PHY_322_DATA
+			DDRSS_PHY_323_DATA
+			DDRSS_PHY_324_DATA
+			DDRSS_PHY_325_DATA
+			DDRSS_PHY_326_DATA
+			DDRSS_PHY_327_DATA
+			DDRSS_PHY_328_DATA
+			DDRSS_PHY_329_DATA
+			DDRSS_PHY_330_DATA
+			DDRSS_PHY_331_DATA
+			DDRSS_PHY_332_DATA
+			DDRSS_PHY_333_DATA
+			DDRSS_PHY_334_DATA
+			DDRSS_PHY_335_DATA
+			DDRSS_PHY_336_DATA
+			DDRSS_PHY_337_DATA
+			DDRSS_PHY_338_DATA
+			DDRSS_PHY_339_DATA
+			DDRSS_PHY_340_DATA
+			DDRSS_PHY_341_DATA
+			DDRSS_PHY_342_DATA
+			DDRSS_PHY_343_DATA
+			DDRSS_PHY_344_DATA
+			DDRSS_PHY_345_DATA
+			DDRSS_PHY_346_DATA
+			DDRSS_PHY_347_DATA
+			DDRSS_PHY_348_DATA
+			DDRSS_PHY_349_DATA
+			DDRSS_PHY_350_DATA
+			DDRSS_PHY_351_DATA
+			DDRSS_PHY_352_DATA
+			DDRSS_PHY_353_DATA
+			DDRSS_PHY_354_DATA
+			DDRSS_PHY_355_DATA
+			DDRSS_PHY_356_DATA
+			DDRSS_PHY_357_DATA
+			DDRSS_PHY_358_DATA
+			DDRSS_PHY_359_DATA
+			DDRSS_PHY_360_DATA
+			DDRSS_PHY_361_DATA
+			DDRSS_PHY_362_DATA
+			DDRSS_PHY_363_DATA
+			DDRSS_PHY_364_DATA
+			DDRSS_PHY_365_DATA
+			DDRSS_PHY_366_DATA
+			DDRSS_PHY_367_DATA
+			DDRSS_PHY_368_DATA
+			DDRSS_PHY_369_DATA
+			DDRSS_PHY_370_DATA
+			DDRSS_PHY_371_DATA
+			DDRSS_PHY_372_DATA
+			DDRSS_PHY_373_DATA
+			DDRSS_PHY_374_DATA
+			DDRSS_PHY_375_DATA
+			DDRSS_PHY_376_DATA
+			DDRSS_PHY_377_DATA
+			DDRSS_PHY_378_DATA
+			DDRSS_PHY_379_DATA
+			DDRSS_PHY_380_DATA
+			DDRSS_PHY_381_DATA
+			DDRSS_PHY_382_DATA
+			DDRSS_PHY_383_DATA
+			DDRSS_PHY_384_DATA
+			DDRSS_PHY_385_DATA
+			DDRSS_PHY_386_DATA
+			DDRSS_PHY_387_DATA
+			DDRSS_PHY_388_DATA
+			DDRSS_PHY_389_DATA
+			DDRSS_PHY_390_DATA
+			DDRSS_PHY_391_DATA
+			DDRSS_PHY_392_DATA
+			DDRSS_PHY_393_DATA
+			DDRSS_PHY_394_DATA
+			DDRSS_PHY_395_DATA
+			DDRSS_PHY_396_DATA
+			DDRSS_PHY_397_DATA
+			DDRSS_PHY_398_DATA
+			DDRSS_PHY_399_DATA
+			DDRSS_PHY_400_DATA
+			DDRSS_PHY_401_DATA
+			DDRSS_PHY_402_DATA
+			DDRSS_PHY_403_DATA
+			DDRSS_PHY_404_DATA
+			DDRSS_PHY_405_DATA
+			DDRSS_PHY_406_DATA
+			DDRSS_PHY_407_DATA
+			DDRSS_PHY_408_DATA
+			DDRSS_PHY_409_DATA
+			DDRSS_PHY_410_DATA
+			DDRSS_PHY_411_DATA
+			DDRSS_PHY_412_DATA
+			DDRSS_PHY_413_DATA
+			DDRSS_PHY_414_DATA
+			DDRSS_PHY_415_DATA
+			DDRSS_PHY_416_DATA
+			DDRSS_PHY_417_DATA
+			DDRSS_PHY_418_DATA
+			DDRSS_PHY_419_DATA
+			DDRSS_PHY_420_DATA
+			DDRSS_PHY_421_DATA
+			DDRSS_PHY_422_DATA
+			DDRSS_PHY_423_DATA
+			DDRSS_PHY_424_DATA
+			DDRSS_PHY_425_DATA
+			DDRSS_PHY_426_DATA
+			DDRSS_PHY_427_DATA
+			DDRSS_PHY_428_DATA
+			DDRSS_PHY_429_DATA
+			DDRSS_PHY_430_DATA
+			DDRSS_PHY_431_DATA
+			DDRSS_PHY_432_DATA
+			DDRSS_PHY_433_DATA
+			DDRSS_PHY_434_DATA
+			DDRSS_PHY_435_DATA
+			DDRSS_PHY_436_DATA
+			DDRSS_PHY_437_DATA
+			DDRSS_PHY_438_DATA
+			DDRSS_PHY_439_DATA
+			DDRSS_PHY_440_DATA
+			DDRSS_PHY_441_DATA
+			DDRSS_PHY_442_DATA
+			DDRSS_PHY_443_DATA
+			DDRSS_PHY_444_DATA
+			DDRSS_PHY_445_DATA
+			DDRSS_PHY_446_DATA
+			DDRSS_PHY_447_DATA
+			DDRSS_PHY_448_DATA
+			DDRSS_PHY_449_DATA
+			DDRSS_PHY_450_DATA
+			DDRSS_PHY_451_DATA
+			DDRSS_PHY_452_DATA
+			DDRSS_PHY_453_DATA
+			DDRSS_PHY_454_DATA
+			DDRSS_PHY_455_DATA
+			DDRSS_PHY_456_DATA
+			DDRSS_PHY_457_DATA
+			DDRSS_PHY_458_DATA
+			DDRSS_PHY_459_DATA
+			DDRSS_PHY_460_DATA
+			DDRSS_PHY_461_DATA
+			DDRSS_PHY_462_DATA
+			DDRSS_PHY_463_DATA
+			DDRSS_PHY_464_DATA
+			DDRSS_PHY_465_DATA
+			DDRSS_PHY_466_DATA
+			DDRSS_PHY_467_DATA
+			DDRSS_PHY_468_DATA
+			DDRSS_PHY_469_DATA
+			DDRSS_PHY_470_DATA
+			DDRSS_PHY_471_DATA
+			DDRSS_PHY_472_DATA
+			DDRSS_PHY_473_DATA
+			DDRSS_PHY_474_DATA
+			DDRSS_PHY_475_DATA
+			DDRSS_PHY_476_DATA
+			DDRSS_PHY_477_DATA
+			DDRSS_PHY_478_DATA
+			DDRSS_PHY_479_DATA
+			DDRSS_PHY_480_DATA
+			DDRSS_PHY_481_DATA
+			DDRSS_PHY_482_DATA
+			DDRSS_PHY_483_DATA
+			DDRSS_PHY_484_DATA
+			DDRSS_PHY_485_DATA
+			DDRSS_PHY_486_DATA
+			DDRSS_PHY_487_DATA
+			DDRSS_PHY_488_DATA
+			DDRSS_PHY_489_DATA
+			DDRSS_PHY_490_DATA
+			DDRSS_PHY_491_DATA
+			DDRSS_PHY_492_DATA
+			DDRSS_PHY_493_DATA
+			DDRSS_PHY_494_DATA
+			DDRSS_PHY_495_DATA
+			DDRSS_PHY_496_DATA
+			DDRSS_PHY_497_DATA
+			DDRSS_PHY_498_DATA
+			DDRSS_PHY_499_DATA
+			DDRSS_PHY_500_DATA
+			DDRSS_PHY_501_DATA
+			DDRSS_PHY_502_DATA
+			DDRSS_PHY_503_DATA
+			DDRSS_PHY_504_DATA
+			DDRSS_PHY_505_DATA
+			DDRSS_PHY_506_DATA
+			DDRSS_PHY_507_DATA
+			DDRSS_PHY_508_DATA
+			DDRSS_PHY_509_DATA
+			DDRSS_PHY_510_DATA
+			DDRSS_PHY_511_DATA
+			DDRSS_PHY_512_DATA
+			DDRSS_PHY_513_DATA
+			DDRSS_PHY_514_DATA
+			DDRSS_PHY_515_DATA
+			DDRSS_PHY_516_DATA
+			DDRSS_PHY_517_DATA
+			DDRSS_PHY_518_DATA
+			DDRSS_PHY_519_DATA
+			DDRSS_PHY_520_DATA
+			DDRSS_PHY_521_DATA
+			DDRSS_PHY_522_DATA
+			DDRSS_PHY_523_DATA
+			DDRSS_PHY_524_DATA
+			DDRSS_PHY_525_DATA
+			DDRSS_PHY_526_DATA
+			DDRSS_PHY_527_DATA
+			DDRSS_PHY_528_DATA
+			DDRSS_PHY_529_DATA
+			DDRSS_PHY_530_DATA
+			DDRSS_PHY_531_DATA
+			DDRSS_PHY_532_DATA
+			DDRSS_PHY_533_DATA
+			DDRSS_PHY_534_DATA
+			DDRSS_PHY_535_DATA
+			DDRSS_PHY_536_DATA
+			DDRSS_PHY_537_DATA
+			DDRSS_PHY_538_DATA
+			DDRSS_PHY_539_DATA
+			DDRSS_PHY_540_DATA
+			DDRSS_PHY_541_DATA
+			DDRSS_PHY_542_DATA
+			DDRSS_PHY_543_DATA
+			DDRSS_PHY_544_DATA
+			DDRSS_PHY_545_DATA
+			DDRSS_PHY_546_DATA
+			DDRSS_PHY_547_DATA
+			DDRSS_PHY_548_DATA
+			DDRSS_PHY_549_DATA
+			DDRSS_PHY_550_DATA
+			DDRSS_PHY_551_DATA
+			DDRSS_PHY_552_DATA
+			DDRSS_PHY_553_DATA
+			DDRSS_PHY_554_DATA
+			DDRSS_PHY_555_DATA
+			DDRSS_PHY_556_DATA
+			DDRSS_PHY_557_DATA
+			DDRSS_PHY_558_DATA
+			DDRSS_PHY_559_DATA
+			DDRSS_PHY_560_DATA
+			DDRSS_PHY_561_DATA
+			DDRSS_PHY_562_DATA
+			DDRSS_PHY_563_DATA
+			DDRSS_PHY_564_DATA
+			DDRSS_PHY_565_DATA
+			DDRSS_PHY_566_DATA
+			DDRSS_PHY_567_DATA
+			DDRSS_PHY_568_DATA
+			DDRSS_PHY_569_DATA
+			DDRSS_PHY_570_DATA
+			DDRSS_PHY_571_DATA
+			DDRSS_PHY_572_DATA
+			DDRSS_PHY_573_DATA
+			DDRSS_PHY_574_DATA
+			DDRSS_PHY_575_DATA
+			DDRSS_PHY_576_DATA
+			DDRSS_PHY_577_DATA
+			DDRSS_PHY_578_DATA
+			DDRSS_PHY_579_DATA
+			DDRSS_PHY_580_DATA
+			DDRSS_PHY_581_DATA
+			DDRSS_PHY_582_DATA
+			DDRSS_PHY_583_DATA
+			DDRSS_PHY_584_DATA
+			DDRSS_PHY_585_DATA
+			DDRSS_PHY_586_DATA
+			DDRSS_PHY_587_DATA
+			DDRSS_PHY_588_DATA
+			DDRSS_PHY_589_DATA
+			DDRSS_PHY_590_DATA
+			DDRSS_PHY_591_DATA
+			DDRSS_PHY_592_DATA
+			DDRSS_PHY_593_DATA
+			DDRSS_PHY_594_DATA
+			DDRSS_PHY_595_DATA
+			DDRSS_PHY_596_DATA
+			DDRSS_PHY_597_DATA
+			DDRSS_PHY_598_DATA
+			DDRSS_PHY_599_DATA
+			DDRSS_PHY_600_DATA
+			DDRSS_PHY_601_DATA
+			DDRSS_PHY_602_DATA
+			DDRSS_PHY_603_DATA
+			DDRSS_PHY_604_DATA
+			DDRSS_PHY_605_DATA
+			DDRSS_PHY_606_DATA
+			DDRSS_PHY_607_DATA
+			DDRSS_PHY_608_DATA
+			DDRSS_PHY_609_DATA
+			DDRSS_PHY_610_DATA
+			DDRSS_PHY_611_DATA
+			DDRSS_PHY_612_DATA
+			DDRSS_PHY_613_DATA
+			DDRSS_PHY_614_DATA
+			DDRSS_PHY_615_DATA
+			DDRSS_PHY_616_DATA
+			DDRSS_PHY_617_DATA
+			DDRSS_PHY_618_DATA
+			DDRSS_PHY_619_DATA
+			DDRSS_PHY_620_DATA
+			DDRSS_PHY_621_DATA
+			DDRSS_PHY_622_DATA
+			DDRSS_PHY_623_DATA
+			DDRSS_PHY_624_DATA
+			DDRSS_PHY_625_DATA
+			DDRSS_PHY_626_DATA
+			DDRSS_PHY_627_DATA
+			DDRSS_PHY_628_DATA
+			DDRSS_PHY_629_DATA
+			DDRSS_PHY_630_DATA
+			DDRSS_PHY_631_DATA
+			DDRSS_PHY_632_DATA
+			DDRSS_PHY_633_DATA
+			DDRSS_PHY_634_DATA
+			DDRSS_PHY_635_DATA
+			DDRSS_PHY_636_DATA
+			DDRSS_PHY_637_DATA
+			DDRSS_PHY_638_DATA
+			DDRSS_PHY_639_DATA
+			DDRSS_PHY_640_DATA
+			DDRSS_PHY_641_DATA
+			DDRSS_PHY_642_DATA
+			DDRSS_PHY_643_DATA
+			DDRSS_PHY_644_DATA
+			DDRSS_PHY_645_DATA
+			DDRSS_PHY_646_DATA
+			DDRSS_PHY_647_DATA
+			DDRSS_PHY_648_DATA
+			DDRSS_PHY_649_DATA
+			DDRSS_PHY_650_DATA
+			DDRSS_PHY_651_DATA
+			DDRSS_PHY_652_DATA
+			DDRSS_PHY_653_DATA
+			DDRSS_PHY_654_DATA
+			DDRSS_PHY_655_DATA
+			DDRSS_PHY_656_DATA
+			DDRSS_PHY_657_DATA
+			DDRSS_PHY_658_DATA
+			DDRSS_PHY_659_DATA
+			DDRSS_PHY_660_DATA
+			DDRSS_PHY_661_DATA
+			DDRSS_PHY_662_DATA
+			DDRSS_PHY_663_DATA
+			DDRSS_PHY_664_DATA
+			DDRSS_PHY_665_DATA
+			DDRSS_PHY_666_DATA
+			DDRSS_PHY_667_DATA
+			DDRSS_PHY_668_DATA
+			DDRSS_PHY_669_DATA
+			DDRSS_PHY_670_DATA
+			DDRSS_PHY_671_DATA
+			DDRSS_PHY_672_DATA
+			DDRSS_PHY_673_DATA
+			DDRSS_PHY_674_DATA
+			DDRSS_PHY_675_DATA
+			DDRSS_PHY_676_DATA
+			DDRSS_PHY_677_DATA
+			DDRSS_PHY_678_DATA
+			DDRSS_PHY_679_DATA
+			DDRSS_PHY_680_DATA
+			DDRSS_PHY_681_DATA
+			DDRSS_PHY_682_DATA
+			DDRSS_PHY_683_DATA
+			DDRSS_PHY_684_DATA
+			DDRSS_PHY_685_DATA
+			DDRSS_PHY_686_DATA
+			DDRSS_PHY_687_DATA
+			DDRSS_PHY_688_DATA
+			DDRSS_PHY_689_DATA
+			DDRSS_PHY_690_DATA
+			DDRSS_PHY_691_DATA
+			DDRSS_PHY_692_DATA
+			DDRSS_PHY_693_DATA
+			DDRSS_PHY_694_DATA
+			DDRSS_PHY_695_DATA
+			DDRSS_PHY_696_DATA
+			DDRSS_PHY_697_DATA
+			DDRSS_PHY_698_DATA
+			DDRSS_PHY_699_DATA
+			DDRSS_PHY_700_DATA
+			DDRSS_PHY_701_DATA
+			DDRSS_PHY_702_DATA
+			DDRSS_PHY_703_DATA
+			DDRSS_PHY_704_DATA
+			DDRSS_PHY_705_DATA
+			DDRSS_PHY_706_DATA
+			DDRSS_PHY_707_DATA
+			DDRSS_PHY_708_DATA
+			DDRSS_PHY_709_DATA
+			DDRSS_PHY_710_DATA
+			DDRSS_PHY_711_DATA
+			DDRSS_PHY_712_DATA
+			DDRSS_PHY_713_DATA
+			DDRSS_PHY_714_DATA
+			DDRSS_PHY_715_DATA
+			DDRSS_PHY_716_DATA
+			DDRSS_PHY_717_DATA
+			DDRSS_PHY_718_DATA
+			DDRSS_PHY_719_DATA
+			DDRSS_PHY_720_DATA
+			DDRSS_PHY_721_DATA
+			DDRSS_PHY_722_DATA
+			DDRSS_PHY_723_DATA
+			DDRSS_PHY_724_DATA
+			DDRSS_PHY_725_DATA
+			DDRSS_PHY_726_DATA
+			DDRSS_PHY_727_DATA
+			DDRSS_PHY_728_DATA
+			DDRSS_PHY_729_DATA
+			DDRSS_PHY_730_DATA
+			DDRSS_PHY_731_DATA
+			DDRSS_PHY_732_DATA
+			DDRSS_PHY_733_DATA
+			DDRSS_PHY_734_DATA
+			DDRSS_PHY_735_DATA
+			DDRSS_PHY_736_DATA
+			DDRSS_PHY_737_DATA
+			DDRSS_PHY_738_DATA
+			DDRSS_PHY_739_DATA
+			DDRSS_PHY_740_DATA
+			DDRSS_PHY_741_DATA
+			DDRSS_PHY_742_DATA
+			DDRSS_PHY_743_DATA
+			DDRSS_PHY_744_DATA
+			DDRSS_PHY_745_DATA
+			DDRSS_PHY_746_DATA
+			DDRSS_PHY_747_DATA
+			DDRSS_PHY_748_DATA
+			DDRSS_PHY_749_DATA
+			DDRSS_PHY_750_DATA
+			DDRSS_PHY_751_DATA
+			DDRSS_PHY_752_DATA
+			DDRSS_PHY_753_DATA
+			DDRSS_PHY_754_DATA
+			DDRSS_PHY_755_DATA
+			DDRSS_PHY_756_DATA
+			DDRSS_PHY_757_DATA
+			DDRSS_PHY_758_DATA
+			DDRSS_PHY_759_DATA
+			DDRSS_PHY_760_DATA
+			DDRSS_PHY_761_DATA
+			DDRSS_PHY_762_DATA
+			DDRSS_PHY_763_DATA
+			DDRSS_PHY_764_DATA
+			DDRSS_PHY_765_DATA
+			DDRSS_PHY_766_DATA
+			DDRSS_PHY_767_DATA
+			DDRSS_PHY_768_DATA
+			DDRSS_PHY_769_DATA
+			DDRSS_PHY_770_DATA
+			DDRSS_PHY_771_DATA
+			DDRSS_PHY_772_DATA
+			DDRSS_PHY_773_DATA
+			DDRSS_PHY_774_DATA
+			DDRSS_PHY_775_DATA
+			DDRSS_PHY_776_DATA
+			DDRSS_PHY_777_DATA
+			DDRSS_PHY_778_DATA
+			DDRSS_PHY_779_DATA
+			DDRSS_PHY_780_DATA
+			DDRSS_PHY_781_DATA
+			DDRSS_PHY_782_DATA
+			DDRSS_PHY_783_DATA
+			DDRSS_PHY_784_DATA
+			DDRSS_PHY_785_DATA
+			DDRSS_PHY_786_DATA
+			DDRSS_PHY_787_DATA
+			DDRSS_PHY_788_DATA
+			DDRSS_PHY_789_DATA
+			DDRSS_PHY_790_DATA
+			DDRSS_PHY_791_DATA
+			DDRSS_PHY_792_DATA
+			DDRSS_PHY_793_DATA
+			DDRSS_PHY_794_DATA
+			DDRSS_PHY_795_DATA
+			DDRSS_PHY_796_DATA
+			DDRSS_PHY_797_DATA
+			DDRSS_PHY_798_DATA
+			DDRSS_PHY_799_DATA
+			DDRSS_PHY_800_DATA
+			DDRSS_PHY_801_DATA
+			DDRSS_PHY_802_DATA
+			DDRSS_PHY_803_DATA
+			DDRSS_PHY_804_DATA
+			DDRSS_PHY_805_DATA
+			DDRSS_PHY_806_DATA
+			DDRSS_PHY_807_DATA
+			DDRSS_PHY_808_DATA
+			DDRSS_PHY_809_DATA
+			DDRSS_PHY_810_DATA
+			DDRSS_PHY_811_DATA
+			DDRSS_PHY_812_DATA
+			DDRSS_PHY_813_DATA
+			DDRSS_PHY_814_DATA
+			DDRSS_PHY_815_DATA
+			DDRSS_PHY_816_DATA
+			DDRSS_PHY_817_DATA
+			DDRSS_PHY_818_DATA
+			DDRSS_PHY_819_DATA
+			DDRSS_PHY_820_DATA
+			DDRSS_PHY_821_DATA
+			DDRSS_PHY_822_DATA
+			DDRSS_PHY_823_DATA
+			DDRSS_PHY_824_DATA
+			DDRSS_PHY_825_DATA
+			DDRSS_PHY_826_DATA
+			DDRSS_PHY_827_DATA
+			DDRSS_PHY_828_DATA
+			DDRSS_PHY_829_DATA
+			DDRSS_PHY_830_DATA
+			DDRSS_PHY_831_DATA
+			DDRSS_PHY_832_DATA
+			DDRSS_PHY_833_DATA
+			DDRSS_PHY_834_DATA
+			DDRSS_PHY_835_DATA
+			DDRSS_PHY_836_DATA
+			DDRSS_PHY_837_DATA
+			DDRSS_PHY_838_DATA
+			DDRSS_PHY_839_DATA
+			DDRSS_PHY_840_DATA
+			DDRSS_PHY_841_DATA
+			DDRSS_PHY_842_DATA
+			DDRSS_PHY_843_DATA
+			DDRSS_PHY_844_DATA
+			DDRSS_PHY_845_DATA
+			DDRSS_PHY_846_DATA
+			DDRSS_PHY_847_DATA
+			DDRSS_PHY_848_DATA
+			DDRSS_PHY_849_DATA
+			DDRSS_PHY_850_DATA
+			DDRSS_PHY_851_DATA
+			DDRSS_PHY_852_DATA
+			DDRSS_PHY_853_DATA
+			DDRSS_PHY_854_DATA
+			DDRSS_PHY_855_DATA
+			DDRSS_PHY_856_DATA
+			DDRSS_PHY_857_DATA
+			DDRSS_PHY_858_DATA
+			DDRSS_PHY_859_DATA
+			DDRSS_PHY_860_DATA
+			DDRSS_PHY_861_DATA
+			DDRSS_PHY_862_DATA
+			DDRSS_PHY_863_DATA
+			DDRSS_PHY_864_DATA
+			DDRSS_PHY_865_DATA
+			DDRSS_PHY_866_DATA
+			DDRSS_PHY_867_DATA
+			DDRSS_PHY_868_DATA
+			DDRSS_PHY_869_DATA
+			DDRSS_PHY_870_DATA
+			DDRSS_PHY_871_DATA
+			DDRSS_PHY_872_DATA
+			DDRSS_PHY_873_DATA
+			DDRSS_PHY_874_DATA
+			DDRSS_PHY_875_DATA
+			DDRSS_PHY_876_DATA
+			DDRSS_PHY_877_DATA
+			DDRSS_PHY_878_DATA
+			DDRSS_PHY_879_DATA
+			DDRSS_PHY_880_DATA
+			DDRSS_PHY_881_DATA
+			DDRSS_PHY_882_DATA
+			DDRSS_PHY_883_DATA
+			DDRSS_PHY_884_DATA
+			DDRSS_PHY_885_DATA
+			DDRSS_PHY_886_DATA
+			DDRSS_PHY_887_DATA
+			DDRSS_PHY_888_DATA
+			DDRSS_PHY_889_DATA
+			DDRSS_PHY_890_DATA
+			DDRSS_PHY_891_DATA
+			DDRSS_PHY_892_DATA
+			DDRSS_PHY_893_DATA
+			DDRSS_PHY_894_DATA
+			DDRSS_PHY_895_DATA
+			DDRSS_PHY_896_DATA
+			DDRSS_PHY_897_DATA
+			DDRSS_PHY_898_DATA
+			DDRSS_PHY_899_DATA
+			DDRSS_PHY_900_DATA
+			DDRSS_PHY_901_DATA
+			DDRSS_PHY_902_DATA
+			DDRSS_PHY_903_DATA
+			DDRSS_PHY_904_DATA
+			DDRSS_PHY_905_DATA
+			DDRSS_PHY_906_DATA
+			DDRSS_PHY_907_DATA
+			DDRSS_PHY_908_DATA
+			DDRSS_PHY_909_DATA
+			DDRSS_PHY_910_DATA
+			DDRSS_PHY_911_DATA
+			DDRSS_PHY_912_DATA
+			DDRSS_PHY_913_DATA
+			DDRSS_PHY_914_DATA
+			DDRSS_PHY_915_DATA
+			DDRSS_PHY_916_DATA
+			DDRSS_PHY_917_DATA
+			DDRSS_PHY_918_DATA
+			DDRSS_PHY_919_DATA
+			DDRSS_PHY_920_DATA
+			DDRSS_PHY_921_DATA
+			DDRSS_PHY_922_DATA
+			DDRSS_PHY_923_DATA
+			DDRSS_PHY_924_DATA
+			DDRSS_PHY_925_DATA
+			DDRSS_PHY_926_DATA
+			DDRSS_PHY_927_DATA
+			DDRSS_PHY_928_DATA
+			DDRSS_PHY_929_DATA
+			DDRSS_PHY_930_DATA
+			DDRSS_PHY_931_DATA
+			DDRSS_PHY_932_DATA
+			DDRSS_PHY_933_DATA
+			DDRSS_PHY_934_DATA
+			DDRSS_PHY_935_DATA
+			DDRSS_PHY_936_DATA
+			DDRSS_PHY_937_DATA
+			DDRSS_PHY_938_DATA
+			DDRSS_PHY_939_DATA
+			DDRSS_PHY_940_DATA
+			DDRSS_PHY_941_DATA
+			DDRSS_PHY_942_DATA
+			DDRSS_PHY_943_DATA
+			DDRSS_PHY_944_DATA
+			DDRSS_PHY_945_DATA
+			DDRSS_PHY_946_DATA
+			DDRSS_PHY_947_DATA
+			DDRSS_PHY_948_DATA
+			DDRSS_PHY_949_DATA
+			DDRSS_PHY_950_DATA
+			DDRSS_PHY_951_DATA
+			DDRSS_PHY_952_DATA
+			DDRSS_PHY_953_DATA
+			DDRSS_PHY_954_DATA
+			DDRSS_PHY_955_DATA
+			DDRSS_PHY_956_DATA
+			DDRSS_PHY_957_DATA
+			DDRSS_PHY_958_DATA
+			DDRSS_PHY_959_DATA
+			DDRSS_PHY_960_DATA
+			DDRSS_PHY_961_DATA
+			DDRSS_PHY_962_DATA
+			DDRSS_PHY_963_DATA
+			DDRSS_PHY_964_DATA
+			DDRSS_PHY_965_DATA
+			DDRSS_PHY_966_DATA
+			DDRSS_PHY_967_DATA
+			DDRSS_PHY_968_DATA
+			DDRSS_PHY_969_DATA
+			DDRSS_PHY_970_DATA
+			DDRSS_PHY_971_DATA
+			DDRSS_PHY_972_DATA
+			DDRSS_PHY_973_DATA
+			DDRSS_PHY_974_DATA
+			DDRSS_PHY_975_DATA
+			DDRSS_PHY_976_DATA
+			DDRSS_PHY_977_DATA
+			DDRSS_PHY_978_DATA
+			DDRSS_PHY_979_DATA
+			DDRSS_PHY_980_DATA
+			DDRSS_PHY_981_DATA
+			DDRSS_PHY_982_DATA
+			DDRSS_PHY_983_DATA
+			DDRSS_PHY_984_DATA
+			DDRSS_PHY_985_DATA
+			DDRSS_PHY_986_DATA
+			DDRSS_PHY_987_DATA
+			DDRSS_PHY_988_DATA
+			DDRSS_PHY_989_DATA
+			DDRSS_PHY_990_DATA
+			DDRSS_PHY_991_DATA
+			DDRSS_PHY_992_DATA
+			DDRSS_PHY_993_DATA
+			DDRSS_PHY_994_DATA
+			DDRSS_PHY_995_DATA
+			DDRSS_PHY_996_DATA
+			DDRSS_PHY_997_DATA
+			DDRSS_PHY_998_DATA
+			DDRSS_PHY_999_DATA
+			DDRSS_PHY_1000_DATA
+			DDRSS_PHY_1001_DATA
+			DDRSS_PHY_1002_DATA
+			DDRSS_PHY_1003_DATA
+			DDRSS_PHY_1004_DATA
+			DDRSS_PHY_1005_DATA
+			DDRSS_PHY_1006_DATA
+			DDRSS_PHY_1007_DATA
+			DDRSS_PHY_1008_DATA
+			DDRSS_PHY_1009_DATA
+			DDRSS_PHY_1010_DATA
+			DDRSS_PHY_1011_DATA
+			DDRSS_PHY_1012_DATA
+			DDRSS_PHY_1013_DATA
+			DDRSS_PHY_1014_DATA
+			DDRSS_PHY_1015_DATA
+			DDRSS_PHY_1016_DATA
+			DDRSS_PHY_1017_DATA
+			DDRSS_PHY_1018_DATA
+			DDRSS_PHY_1019_DATA
+			DDRSS_PHY_1020_DATA
+			DDRSS_PHY_1021_DATA
+			DDRSS_PHY_1022_DATA
+			DDRSS_PHY_1023_DATA
+			DDRSS_PHY_1024_DATA
+			DDRSS_PHY_1025_DATA
+			DDRSS_PHY_1026_DATA
+			DDRSS_PHY_1027_DATA
+			DDRSS_PHY_1028_DATA
+			DDRSS_PHY_1029_DATA
+			DDRSS_PHY_1030_DATA
+			DDRSS_PHY_1031_DATA
+			DDRSS_PHY_1032_DATA
+			DDRSS_PHY_1033_DATA
+			DDRSS_PHY_1034_DATA
+			DDRSS_PHY_1035_DATA
+			DDRSS_PHY_1036_DATA
+			DDRSS_PHY_1037_DATA
+			DDRSS_PHY_1038_DATA
+			DDRSS_PHY_1039_DATA
+			DDRSS_PHY_1040_DATA
+			DDRSS_PHY_1041_DATA
+			DDRSS_PHY_1042_DATA
+			DDRSS_PHY_1043_DATA
+			DDRSS_PHY_1044_DATA
+			DDRSS_PHY_1045_DATA
+			DDRSS_PHY_1046_DATA
+			DDRSS_PHY_1047_DATA
+			DDRSS_PHY_1048_DATA
+			DDRSS_PHY_1049_DATA
+			DDRSS_PHY_1050_DATA
+			DDRSS_PHY_1051_DATA
+			DDRSS_PHY_1052_DATA
+			DDRSS_PHY_1053_DATA
+			DDRSS_PHY_1054_DATA
+			DDRSS_PHY_1055_DATA
+			DDRSS_PHY_1056_DATA
+			DDRSS_PHY_1057_DATA
+			DDRSS_PHY_1058_DATA
+			DDRSS_PHY_1059_DATA
+			DDRSS_PHY_1060_DATA
+			DDRSS_PHY_1061_DATA
+			DDRSS_PHY_1062_DATA
+			DDRSS_PHY_1063_DATA
+			DDRSS_PHY_1064_DATA
+			DDRSS_PHY_1065_DATA
+			DDRSS_PHY_1066_DATA
+			DDRSS_PHY_1067_DATA
+			DDRSS_PHY_1068_DATA
+			DDRSS_PHY_1069_DATA
+			DDRSS_PHY_1070_DATA
+			DDRSS_PHY_1071_DATA
+			DDRSS_PHY_1072_DATA
+			DDRSS_PHY_1073_DATA
+			DDRSS_PHY_1074_DATA
+			DDRSS_PHY_1075_DATA
+			DDRSS_PHY_1076_DATA
+			DDRSS_PHY_1077_DATA
+			DDRSS_PHY_1078_DATA
+			DDRSS_PHY_1079_DATA
+			DDRSS_PHY_1080_DATA
+			DDRSS_PHY_1081_DATA
+			DDRSS_PHY_1082_DATA
+			DDRSS_PHY_1083_DATA
+			DDRSS_PHY_1084_DATA
+			DDRSS_PHY_1085_DATA
+			DDRSS_PHY_1086_DATA
+			DDRSS_PHY_1087_DATA
+			DDRSS_PHY_1088_DATA
+			DDRSS_PHY_1089_DATA
+			DDRSS_PHY_1090_DATA
+			DDRSS_PHY_1091_DATA
+			DDRSS_PHY_1092_DATA
+			DDRSS_PHY_1093_DATA
+			DDRSS_PHY_1094_DATA
+			DDRSS_PHY_1095_DATA
+			DDRSS_PHY_1096_DATA
+			DDRSS_PHY_1097_DATA
+			DDRSS_PHY_1098_DATA
+			DDRSS_PHY_1099_DATA
+			DDRSS_PHY_1100_DATA
+			DDRSS_PHY_1101_DATA
+			DDRSS_PHY_1102_DATA
+			DDRSS_PHY_1103_DATA
+			DDRSS_PHY_1104_DATA
+			DDRSS_PHY_1105_DATA
+			DDRSS_PHY_1106_DATA
+			DDRSS_PHY_1107_DATA
+			DDRSS_PHY_1108_DATA
+			DDRSS_PHY_1109_DATA
+			DDRSS_PHY_1110_DATA
+			DDRSS_PHY_1111_DATA
+			DDRSS_PHY_1112_DATA
+			DDRSS_PHY_1113_DATA
+			DDRSS_PHY_1114_DATA
+			DDRSS_PHY_1115_DATA
+			DDRSS_PHY_1116_DATA
+			DDRSS_PHY_1117_DATA
+			DDRSS_PHY_1118_DATA
+			DDRSS_PHY_1119_DATA
+			DDRSS_PHY_1120_DATA
+			DDRSS_PHY_1121_DATA
+			DDRSS_PHY_1122_DATA
+			DDRSS_PHY_1123_DATA
+			DDRSS_PHY_1124_DATA
+			DDRSS_PHY_1125_DATA
+			DDRSS_PHY_1126_DATA
+			DDRSS_PHY_1127_DATA
+			DDRSS_PHY_1128_DATA
+			DDRSS_PHY_1129_DATA
+			DDRSS_PHY_1130_DATA
+			DDRSS_PHY_1131_DATA
+			DDRSS_PHY_1132_DATA
+			DDRSS_PHY_1133_DATA
+			DDRSS_PHY_1134_DATA
+			DDRSS_PHY_1135_DATA
+			DDRSS_PHY_1136_DATA
+			DDRSS_PHY_1137_DATA
+			DDRSS_PHY_1138_DATA
+			DDRSS_PHY_1139_DATA
+			DDRSS_PHY_1140_DATA
+			DDRSS_PHY_1141_DATA
+			DDRSS_PHY_1142_DATA
+			DDRSS_PHY_1143_DATA
+			DDRSS_PHY_1144_DATA
+			DDRSS_PHY_1145_DATA
+			DDRSS_PHY_1146_DATA
+			DDRSS_PHY_1147_DATA
+			DDRSS_PHY_1148_DATA
+			DDRSS_PHY_1149_DATA
+			DDRSS_PHY_1150_DATA
+			DDRSS_PHY_1151_DATA
+			DDRSS_PHY_1152_DATA
+			DDRSS_PHY_1153_DATA
+			DDRSS_PHY_1154_DATA
+			DDRSS_PHY_1155_DATA
+			DDRSS_PHY_1156_DATA
+			DDRSS_PHY_1157_DATA
+			DDRSS_PHY_1158_DATA
+			DDRSS_PHY_1159_DATA
+			DDRSS_PHY_1160_DATA
+			DDRSS_PHY_1161_DATA
+			DDRSS_PHY_1162_DATA
+			DDRSS_PHY_1163_DATA
+			DDRSS_PHY_1164_DATA
+			DDRSS_PHY_1165_DATA
+			DDRSS_PHY_1166_DATA
+			DDRSS_PHY_1167_DATA
+			DDRSS_PHY_1168_DATA
+			DDRSS_PHY_1169_DATA
+			DDRSS_PHY_1170_DATA
+			DDRSS_PHY_1171_DATA
+			DDRSS_PHY_1172_DATA
+			DDRSS_PHY_1173_DATA
+			DDRSS_PHY_1174_DATA
+			DDRSS_PHY_1175_DATA
+			DDRSS_PHY_1176_DATA
+			DDRSS_PHY_1177_DATA
+			DDRSS_PHY_1178_DATA
+			DDRSS_PHY_1179_DATA
+			DDRSS_PHY_1180_DATA
+			DDRSS_PHY_1181_DATA
+			DDRSS_PHY_1182_DATA
+			DDRSS_PHY_1183_DATA
+			DDRSS_PHY_1184_DATA
+			DDRSS_PHY_1185_DATA
+			DDRSS_PHY_1186_DATA
+			DDRSS_PHY_1187_DATA
+			DDRSS_PHY_1188_DATA
+			DDRSS_PHY_1189_DATA
+			DDRSS_PHY_1190_DATA
+			DDRSS_PHY_1191_DATA
+			DDRSS_PHY_1192_DATA
+			DDRSS_PHY_1193_DATA
+			DDRSS_PHY_1194_DATA
+			DDRSS_PHY_1195_DATA
+			DDRSS_PHY_1196_DATA
+			DDRSS_PHY_1197_DATA
+			DDRSS_PHY_1198_DATA
+			DDRSS_PHY_1199_DATA
+			DDRSS_PHY_1200_DATA
+			DDRSS_PHY_1201_DATA
+			DDRSS_PHY_1202_DATA
+			DDRSS_PHY_1203_DATA
+			DDRSS_PHY_1204_DATA
+			DDRSS_PHY_1205_DATA
+			DDRSS_PHY_1206_DATA
+			DDRSS_PHY_1207_DATA
+			DDRSS_PHY_1208_DATA
+			DDRSS_PHY_1209_DATA
+			DDRSS_PHY_1210_DATA
+			DDRSS_PHY_1211_DATA
+			DDRSS_PHY_1212_DATA
+			DDRSS_PHY_1213_DATA
+			DDRSS_PHY_1214_DATA
+			DDRSS_PHY_1215_DATA
+			DDRSS_PHY_1216_DATA
+			DDRSS_PHY_1217_DATA
+			DDRSS_PHY_1218_DATA
+			DDRSS_PHY_1219_DATA
+			DDRSS_PHY_1220_DATA
+			DDRSS_PHY_1221_DATA
+			DDRSS_PHY_1222_DATA
+			DDRSS_PHY_1223_DATA
+			DDRSS_PHY_1224_DATA
+			DDRSS_PHY_1225_DATA
+			DDRSS_PHY_1226_DATA
+			DDRSS_PHY_1227_DATA
+			DDRSS_PHY_1228_DATA
+			DDRSS_PHY_1229_DATA
+			DDRSS_PHY_1230_DATA
+			DDRSS_PHY_1231_DATA
+			DDRSS_PHY_1232_DATA
+			DDRSS_PHY_1233_DATA
+			DDRSS_PHY_1234_DATA
+			DDRSS_PHY_1235_DATA
+			DDRSS_PHY_1236_DATA
+			DDRSS_PHY_1237_DATA
+			DDRSS_PHY_1238_DATA
+			DDRSS_PHY_1239_DATA
+			DDRSS_PHY_1240_DATA
+			DDRSS_PHY_1241_DATA
+			DDRSS_PHY_1242_DATA
+			DDRSS_PHY_1243_DATA
+			DDRSS_PHY_1244_DATA
+			DDRSS_PHY_1245_DATA
+			DDRSS_PHY_1246_DATA
+			DDRSS_PHY_1247_DATA
+			DDRSS_PHY_1248_DATA
+			DDRSS_PHY_1249_DATA
+			DDRSS_PHY_1250_DATA
+			DDRSS_PHY_1251_DATA
+			DDRSS_PHY_1252_DATA
+			DDRSS_PHY_1253_DATA
+			DDRSS_PHY_1254_DATA
+			DDRSS_PHY_1255_DATA
+			DDRSS_PHY_1256_DATA
+			DDRSS_PHY_1257_DATA
+			DDRSS_PHY_1258_DATA
+			DDRSS_PHY_1259_DATA
+			DDRSS_PHY_1260_DATA
+			DDRSS_PHY_1261_DATA
+			DDRSS_PHY_1262_DATA
+			DDRSS_PHY_1263_DATA
+			DDRSS_PHY_1264_DATA
+			DDRSS_PHY_1265_DATA
+			DDRSS_PHY_1266_DATA
+			DDRSS_PHY_1267_DATA
+			DDRSS_PHY_1268_DATA
+			DDRSS_PHY_1269_DATA
+			DDRSS_PHY_1270_DATA
+			DDRSS_PHY_1271_DATA
+			DDRSS_PHY_1272_DATA
+			DDRSS_PHY_1273_DATA
+			DDRSS_PHY_1274_DATA
+			DDRSS_PHY_1275_DATA
+			DDRSS_PHY_1276_DATA
+			DDRSS_PHY_1277_DATA
+			DDRSS_PHY_1278_DATA
+			DDRSS_PHY_1279_DATA
+			DDRSS_PHY_1280_DATA
+			DDRSS_PHY_1281_DATA
+			DDRSS_PHY_1282_DATA
+			DDRSS_PHY_1283_DATA
+			DDRSS_PHY_1284_DATA
+			DDRSS_PHY_1285_DATA
+			DDRSS_PHY_1286_DATA
+			DDRSS_PHY_1287_DATA
+			DDRSS_PHY_1288_DATA
+			DDRSS_PHY_1289_DATA
+			DDRSS_PHY_1290_DATA
+			DDRSS_PHY_1291_DATA
+			DDRSS_PHY_1292_DATA
+			DDRSS_PHY_1293_DATA
+			DDRSS_PHY_1294_DATA
+			DDRSS_PHY_1295_DATA
+			DDRSS_PHY_1296_DATA
+			DDRSS_PHY_1297_DATA
+			DDRSS_PHY_1298_DATA
+			DDRSS_PHY_1299_DATA
+			DDRSS_PHY_1300_DATA
+			DDRSS_PHY_1301_DATA
+			DDRSS_PHY_1302_DATA
+			DDRSS_PHY_1303_DATA
+			DDRSS_PHY_1304_DATA
+			DDRSS_PHY_1305_DATA
+			DDRSS_PHY_1306_DATA
+			DDRSS_PHY_1307_DATA
+			DDRSS_PHY_1308_DATA
+			DDRSS_PHY_1309_DATA
+			DDRSS_PHY_1310_DATA
+			DDRSS_PHY_1311_DATA
+			DDRSS_PHY_1312_DATA
+			DDRSS_PHY_1313_DATA
+			DDRSS_PHY_1314_DATA
+			DDRSS_PHY_1315_DATA
+			DDRSS_PHY_1316_DATA
+			DDRSS_PHY_1317_DATA
+			DDRSS_PHY_1318_DATA
+			DDRSS_PHY_1319_DATA
+			DDRSS_PHY_1320_DATA
+			DDRSS_PHY_1321_DATA
+			DDRSS_PHY_1322_DATA
+			DDRSS_PHY_1323_DATA
+			DDRSS_PHY_1324_DATA
+			DDRSS_PHY_1325_DATA
+			DDRSS_PHY_1326_DATA
+			DDRSS_PHY_1327_DATA
+			DDRSS_PHY_1328_DATA
+			DDRSS_PHY_1329_DATA
+			DDRSS_PHY_1330_DATA
+			DDRSS_PHY_1331_DATA
+			DDRSS_PHY_1332_DATA
+			DDRSS_PHY_1333_DATA
+			DDRSS_PHY_1334_DATA
+			DDRSS_PHY_1335_DATA
+			DDRSS_PHY_1336_DATA
+			DDRSS_PHY_1337_DATA
+			DDRSS_PHY_1338_DATA
+			DDRSS_PHY_1339_DATA
+			DDRSS_PHY_1340_DATA
+			DDRSS_PHY_1341_DATA
+			DDRSS_PHY_1342_DATA
+			DDRSS_PHY_1343_DATA
+			DDRSS_PHY_1344_DATA
+			DDRSS_PHY_1345_DATA
+			DDRSS_PHY_1346_DATA
+			DDRSS_PHY_1347_DATA
+			DDRSS_PHY_1348_DATA
+			DDRSS_PHY_1349_DATA
+			DDRSS_PHY_1350_DATA
+			DDRSS_PHY_1351_DATA
+			DDRSS_PHY_1352_DATA
+			DDRSS_PHY_1353_DATA
+			DDRSS_PHY_1354_DATA
+			DDRSS_PHY_1355_DATA
+			DDRSS_PHY_1356_DATA
+			DDRSS_PHY_1357_DATA
+			DDRSS_PHY_1358_DATA
+			DDRSS_PHY_1359_DATA
+			DDRSS_PHY_1360_DATA
+			DDRSS_PHY_1361_DATA
+			DDRSS_PHY_1362_DATA
+			DDRSS_PHY_1363_DATA
+			DDRSS_PHY_1364_DATA
+			DDRSS_PHY_1365_DATA
+			DDRSS_PHY_1366_DATA
+			DDRSS_PHY_1367_DATA
+			DDRSS_PHY_1368_DATA
+			DDRSS_PHY_1369_DATA
+			DDRSS_PHY_1370_DATA
+			DDRSS_PHY_1371_DATA
+			DDRSS_PHY_1372_DATA
+			DDRSS_PHY_1373_DATA
+			DDRSS_PHY_1374_DATA
+			DDRSS_PHY_1375_DATA
+			DDRSS_PHY_1376_DATA
+			DDRSS_PHY_1377_DATA
+			DDRSS_PHY_1378_DATA
+			DDRSS_PHY_1379_DATA
+			DDRSS_PHY_1380_DATA
+			DDRSS_PHY_1381_DATA
+			DDRSS_PHY_1382_DATA
+			DDRSS_PHY_1383_DATA
+			DDRSS_PHY_1384_DATA
+			DDRSS_PHY_1385_DATA
+			DDRSS_PHY_1386_DATA
+			DDRSS_PHY_1387_DATA
+			DDRSS_PHY_1388_DATA
+			DDRSS_PHY_1389_DATA
+			DDRSS_PHY_1390_DATA
+			DDRSS_PHY_1391_DATA
+			DDRSS_PHY_1392_DATA
+			DDRSS_PHY_1393_DATA
+			DDRSS_PHY_1394_DATA
+			DDRSS_PHY_1395_DATA
+			DDRSS_PHY_1396_DATA
+			DDRSS_PHY_1397_DATA
+			DDRSS_PHY_1398_DATA
+			DDRSS_PHY_1399_DATA
+			DDRSS_PHY_1400_DATA
+			DDRSS_PHY_1401_DATA
+			DDRSS_PHY_1402_DATA
+			DDRSS_PHY_1403_DATA
+			DDRSS_PHY_1404_DATA
+			DDRSS_PHY_1405_DATA
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am64-evm-ddr4-1600MTs.dtsi b/roms/u-boot/arch/arm/dts/k3-am64-evm-ddr4-1600MTs.dtsi
new file mode 100644
index 000000000..9a008df75
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am64-evm-ddr4-1600MTs.dtsi
@@ -0,0 +1,2187 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This file was generated by the AM64x_DDR4_RegConfig_Tool, Revision: 0.6.0
+ * This file was generated on Oct 26 2020
+ * DDR4 Frequency = 800MHz (1600MTs)
+ * Density: 16Gb
+ * Number of Ranks: 1
+ */
+
+#define DDRSS_PLL_FHS_CNT 6
+#define DDRSS_PLL_FREQUENCY_1 400000000
+#define DDRSS_PLL_FREQUENCY_2 400000000
+
+#define DDRSS_CTL_0_DATA 0x00000A00
+#define DDRSS_CTL_1_DATA 0x00000000
+#define DDRSS_CTL_2_DATA 0x00000000
+#define DDRSS_CTL_3_DATA 0x00000000
+#define DDRSS_CTL_4_DATA 0x00000000
+#define DDRSS_CTL_5_DATA 0x00000000
+#define DDRSS_CTL_6_DATA 0x00000000
+#define DDRSS_CTL_7_DATA 0x000890B8
+#define DDRSS_CTL_8_DATA 0x00000000
+#define DDRSS_CTL_9_DATA 0x00000000
+#define DDRSS_CTL_10_DATA 0x00000000
+#define DDRSS_CTL_11_DATA 0x000890B8
+#define DDRSS_CTL_12_DATA 0x00000000
+#define DDRSS_CTL_13_DATA 0x00000000
+#define DDRSS_CTL_14_DATA 0x00000000
+#define DDRSS_CTL_15_DATA 0x000890B8
+#define DDRSS_CTL_16_DATA 0x00000000
+#define DDRSS_CTL_17_DATA 0x00000000
+#define DDRSS_CTL_18_DATA 0x00000000
+#define DDRSS_CTL_19_DATA 0x01010100
+#define DDRSS_CTL_20_DATA 0x01000100
+#define DDRSS_CTL_21_DATA 0x01000110
+#define DDRSS_CTL_22_DATA 0x02010002
+#define DDRSS_CTL_23_DATA 0x00027100
+#define DDRSS_CTL_24_DATA 0x00061A80
+#define DDRSS_CTL_25_DATA 0x02550255
+#define DDRSS_CTL_26_DATA 0x00000255
+#define DDRSS_CTL_27_DATA 0x00000000
+#define DDRSS_CTL_28_DATA 0x00000000
+#define DDRSS_CTL_29_DATA 0x00000000
+#define DDRSS_CTL_30_DATA 0x00000000
+#define DDRSS_CTL_31_DATA 0x00000000
+#define DDRSS_CTL_32_DATA 0x00000000
+#define DDRSS_CTL_33_DATA 0x00000000
+#define DDRSS_CTL_34_DATA 0x00000000
+#define DDRSS_CTL_35_DATA 0x00000000
+#define DDRSS_CTL_36_DATA 0x00000000
+#define DDRSS_CTL_37_DATA 0x00000000
+#define DDRSS_CTL_38_DATA 0x04000918
+#define DDRSS_CTL_39_DATA 0x1C1C1C1C
+#define DDRSS_CTL_40_DATA 0x04000918
+#define DDRSS_CTL_41_DATA 0x1C1C1C1C
+#define DDRSS_CTL_42_DATA 0x04000918
+#define DDRSS_CTL_43_DATA 0x1C1C1C1C
+#define DDRSS_CTL_44_DATA 0x05050404
+#define DDRSS_CTL_45_DATA 0x00002706
+#define DDRSS_CTL_46_DATA 0x0602001D
+#define DDRSS_CTL_47_DATA 0x05001D0B
+#define DDRSS_CTL_48_DATA 0x00270605
+#define DDRSS_CTL_49_DATA 0x0602001D
+#define DDRSS_CTL_50_DATA 0x05001D0B
+#define DDRSS_CTL_51_DATA 0x00270605
+#define DDRSS_CTL_52_DATA 0x0602001D
+#define DDRSS_CTL_53_DATA 0x07001D0B
+#define DDRSS_CTL_54_DATA 0x00180807
+#define DDRSS_CTL_55_DATA 0x0400DB60
+#define DDRSS_CTL_56_DATA 0x07070009
+#define DDRSS_CTL_57_DATA 0x00001808
+#define DDRSS_CTL_58_DATA 0x0400DB60
+#define DDRSS_CTL_59_DATA 0x07070009
+#define DDRSS_CTL_60_DATA 0x00001808
+#define DDRSS_CTL_61_DATA 0x0400DB60
+#define DDRSS_CTL_62_DATA 0x03000009
+#define DDRSS_CTL_63_DATA 0x0D0C0002
+#define DDRSS_CTL_64_DATA 0x0D0C0D0C
+#define DDRSS_CTL_65_DATA 0x01010000
+#define DDRSS_CTL_66_DATA 0x03191919
+#define DDRSS_CTL_67_DATA 0x0B0B0B0B
+#define DDRSS_CTL_68_DATA 0x00000B0B
+#define DDRSS_CTL_69_DATA 0x00000101
+#define DDRSS_CTL_70_DATA 0x00000000
+#define DDRSS_CTL_71_DATA 0x01000000
+#define DDRSS_CTL_72_DATA 0x01180803
+#define DDRSS_CTL_73_DATA 0x00001860
+#define DDRSS_CTL_74_DATA 0x00000118
+#define DDRSS_CTL_75_DATA 0x00001860
+#define DDRSS_CTL_76_DATA 0x00000118
+#define DDRSS_CTL_77_DATA 0x00001860
+#define DDRSS_CTL_78_DATA 0x00000005
+#define DDRSS_CTL_79_DATA 0x00000000
+#define DDRSS_CTL_80_DATA 0x00000000
+#define DDRSS_CTL_81_DATA 0x00000000
+#define DDRSS_CTL_82_DATA 0x00000000
+#define DDRSS_CTL_83_DATA 0x00000000
+#define DDRSS_CTL_84_DATA 0x00000000
+#define DDRSS_CTL_85_DATA 0x00000000
+#define DDRSS_CTL_86_DATA 0x00000000
+#define DDRSS_CTL_87_DATA 0x00090009
+#define DDRSS_CTL_88_DATA 0x00000009
+#define DDRSS_CTL_89_DATA 0x00000000
+#define DDRSS_CTL_90_DATA 0x00000000
+#define DDRSS_CTL_91_DATA 0x00000000
+#define DDRSS_CTL_92_DATA 0x00000000
+#define DDRSS_CTL_93_DATA 0x00000000
+#define DDRSS_CTL_94_DATA 0x00010001
+#define DDRSS_CTL_95_DATA 0x00025501
+#define DDRSS_CTL_96_DATA 0x02550120
+#define DDRSS_CTL_97_DATA 0x02550120
+#define DDRSS_CTL_98_DATA 0x01200120
+#define DDRSS_CTL_99_DATA 0x01200120
+#define DDRSS_CTL_100_DATA 0x00000000
+#define DDRSS_CTL_101_DATA 0x00000000
+#define DDRSS_CTL_102_DATA 0x00000000
+#define DDRSS_CTL_103_DATA 0x00000000
+#define DDRSS_CTL_104_DATA 0x00000000
+#define DDRSS_CTL_105_DATA 0x00000000
+#define DDRSS_CTL_106_DATA 0x03010000
+#define DDRSS_CTL_107_DATA 0x00010000
+#define DDRSS_CTL_108_DATA 0x00000000
+#define DDRSS_CTL_109_DATA 0x01000000
+#define DDRSS_CTL_110_DATA 0x80104002
+#define DDRSS_CTL_111_DATA 0x00040003
+#define DDRSS_CTL_112_DATA 0x00040005
+#define DDRSS_CTL_113_DATA 0x00030000
+#define DDRSS_CTL_114_DATA 0x00050004
+#define DDRSS_CTL_115_DATA 0x00000004
+#define DDRSS_CTL_116_DATA 0x00040003
+#define DDRSS_CTL_117_DATA 0x00040005
+#define DDRSS_CTL_118_DATA 0x00000000
+#define DDRSS_CTL_119_DATA 0x00061800
+#define DDRSS_CTL_120_DATA 0x00061800
+#define DDRSS_CTL_121_DATA 0x00061800
+#define DDRSS_CTL_122_DATA 0x00061800
+#define DDRSS_CTL_123_DATA 0x00061800
+#define DDRSS_CTL_124_DATA 0x00000000
+#define DDRSS_CTL_125_DATA 0x0000AAA0
+#define DDRSS_CTL_126_DATA 0x00061800
+#define DDRSS_CTL_127_DATA 0x00061800
+#define DDRSS_CTL_128_DATA 0x00061800
+#define DDRSS_CTL_129_DATA 0x00061800
+#define DDRSS_CTL_130_DATA 0x00061800
+#define DDRSS_CTL_131_DATA 0x00000000
+#define DDRSS_CTL_132_DATA 0x0000AAA0
+#define DDRSS_CTL_133_DATA 0x00061800
+#define DDRSS_CTL_134_DATA 0x00061800
+#define DDRSS_CTL_135_DATA 0x00061800
+#define DDRSS_CTL_136_DATA 0x00061800
+#define DDRSS_CTL_137_DATA 0x00061800
+#define DDRSS_CTL_138_DATA 0x00000000
+#define DDRSS_CTL_139_DATA 0x0000AAA0
+#define DDRSS_CTL_140_DATA 0x00000000
+#define DDRSS_CTL_141_DATA 0x00000000
+#define DDRSS_CTL_142_DATA 0x00000000
+#define DDRSS_CTL_143_DATA 0x00000000
+#define DDRSS_CTL_144_DATA 0x00000000
+#define DDRSS_CTL_145_DATA 0x00000000
+#define DDRSS_CTL_146_DATA 0x00000000
+#define DDRSS_CTL_147_DATA 0x00000000
+#define DDRSS_CTL_148_DATA 0x00000000
+#define DDRSS_CTL_149_DATA 0x00000000
+#define DDRSS_CTL_150_DATA 0x00000000
+#define DDRSS_CTL_151_DATA 0x00000000
+#define DDRSS_CTL_152_DATA 0x00000000
+#define DDRSS_CTL_153_DATA 0x00000000
+#define DDRSS_CTL_154_DATA 0x00000000
+#define DDRSS_CTL_155_DATA 0x00000000
+#define DDRSS_CTL_156_DATA 0x080C0000
+#define DDRSS_CTL_157_DATA 0x080C080C
+#define DDRSS_CTL_158_DATA 0x00000000
+#define DDRSS_CTL_159_DATA 0x07010A09
+#define DDRSS_CTL_160_DATA 0x000E0A09
+#define DDRSS_CTL_161_DATA 0x010A0900
+#define DDRSS_CTL_162_DATA 0x0E0A0907
+#define DDRSS_CTL_163_DATA 0x0A090000
+#define DDRSS_CTL_164_DATA 0x0A090701
+#define DDRSS_CTL_165_DATA 0x0000000E
+#define DDRSS_CTL_166_DATA 0x00040003
+#define DDRSS_CTL_167_DATA 0x00000007
+#define DDRSS_CTL_168_DATA 0x00000000
+#define DDRSS_CTL_169_DATA 0x00000000
+#define DDRSS_CTL_170_DATA 0x00000000
+#define DDRSS_CTL_171_DATA 0x00000000
+#define DDRSS_CTL_172_DATA 0x00000000
+#define DDRSS_CTL_173_DATA 0x00000000
+#define DDRSS_CTL_174_DATA 0x01000000
+#define DDRSS_CTL_175_DATA 0x00000000
+#define DDRSS_CTL_176_DATA 0x00001500
+#define DDRSS_CTL_177_DATA 0x0000100E
+#define DDRSS_CTL_178_DATA 0x00000000
+#define DDRSS_CTL_179_DATA 0x00000000
+#define DDRSS_CTL_180_DATA 0x00000001
+#define DDRSS_CTL_181_DATA 0x00000002
+#define DDRSS_CTL_182_DATA 0x00000C00
+#define DDRSS_CTL_183_DATA 0x00001000
+#define DDRSS_CTL_184_DATA 0x00000C00
+#define DDRSS_CTL_185_DATA 0x00001000
+#define DDRSS_CTL_186_DATA 0x00000C00
+#define DDRSS_CTL_187_DATA 0x00001000
+#define DDRSS_CTL_188_DATA 0x00000000
+#define DDRSS_CTL_189_DATA 0x00000000
+#define DDRSS_CTL_190_DATA 0x00000000
+#define DDRSS_CTL_191_DATA 0x00000000
+#define DDRSS_CTL_192_DATA 0x00000000
+#define DDRSS_CTL_193_DATA 0x00000000
+#define DDRSS_CTL_194_DATA 0x00000000
+#define DDRSS_CTL_195_DATA 0x00000000
+#define DDRSS_CTL_196_DATA 0x00000000
+#define DDRSS_CTL_197_DATA 0x00000000
+#define DDRSS_CTL_198_DATA 0x00000000
+#define DDRSS_CTL_199_DATA 0x00000000
+#define DDRSS_CTL_200_DATA 0x00000000
+#define DDRSS_CTL_201_DATA 0x00000000
+#define DDRSS_CTL_202_DATA 0x00000000
+#define DDRSS_CTL_203_DATA 0x00000000
+#define DDRSS_CTL_204_DATA 0x00041400
+#define DDRSS_CTL_205_DATA 0x00000301
+#define DDRSS_CTL_206_DATA 0x00000000
+#define DDRSS_CTL_207_DATA 0x00000414
+#define DDRSS_CTL_208_DATA 0x00000301
+#define DDRSS_CTL_209_DATA 0x00000000
+#define DDRSS_CTL_210_DATA 0x00000414
+#define DDRSS_CTL_211_DATA 0x00000301
+#define DDRSS_CTL_212_DATA 0x00000000
+#define DDRSS_CTL_213_DATA 0x00000414
+#define DDRSS_CTL_214_DATA 0x00000301
+#define DDRSS_CTL_215_DATA 0x00000000
+#define DDRSS_CTL_216_DATA 0x00000414
+#define DDRSS_CTL_217_DATA 0x00000301
+#define DDRSS_CTL_218_DATA 0x00000000
+#define DDRSS_CTL_219_DATA 0x00000414
+#define DDRSS_CTL_220_DATA 0x00000301
+#define DDRSS_CTL_221_DATA 0x00000000
+#define DDRSS_CTL_222_DATA 0x00000000
+#define DDRSS_CTL_223_DATA 0x00000000
+#define DDRSS_CTL_224_DATA 0x00000000
+#define DDRSS_CTL_225_DATA 0x00000000
+#define DDRSS_CTL_226_DATA 0x00000000
+#define DDRSS_CTL_227_DATA 0x00000000
+#define DDRSS_CTL_228_DATA 0x00000000
+#define DDRSS_CTL_229_DATA 0x00000000
+#define DDRSS_CTL_230_DATA 0x00000000
+#define DDRSS_CTL_231_DATA 0x00000000
+#define DDRSS_CTL_232_DATA 0x00000000
+#define DDRSS_CTL_233_DATA 0x00000000
+#define DDRSS_CTL_234_DATA 0x00000000
+#define DDRSS_CTL_235_DATA 0x00000000
+#define DDRSS_CTL_236_DATA 0x00000401
+#define DDRSS_CTL_237_DATA 0x00000401
+#define DDRSS_CTL_238_DATA 0x00000401
+#define DDRSS_CTL_239_DATA 0x00000401
+#define DDRSS_CTL_240_DATA 0x00000401
+#define DDRSS_CTL_241_DATA 0x00000401
+#define DDRSS_CTL_242_DATA 0x00000493
+#define DDRSS_CTL_243_DATA 0x00000493
+#define DDRSS_CTL_244_DATA 0x00000493
+#define DDRSS_CTL_245_DATA 0x00000493
+#define DDRSS_CTL_246_DATA 0x00000493
+#define DDRSS_CTL_247_DATA 0x00000493
+#define DDRSS_CTL_248_DATA 0x00000000
+#define DDRSS_CTL_249_DATA 0x00000000
+#define DDRSS_CTL_250_DATA 0x00000000
+#define DDRSS_CTL_251_DATA 0x00000000
+#define DDRSS_CTL_252_DATA 0x00000000
+#define DDRSS_CTL_253_DATA 0x00000000
+#define DDRSS_CTL_254_DATA 0x00000000
+#define DDRSS_CTL_255_DATA 0x00000000
+#define DDRSS_CTL_256_DATA 0x00000000
+#define DDRSS_CTL_257_DATA 0x00000000
+#define DDRSS_CTL_258_DATA 0x00000000
+#define DDRSS_CTL_259_DATA 0x00000000
+#define DDRSS_CTL_260_DATA 0x00000000
+#define DDRSS_CTL_261_DATA 0x00000000
+#define DDRSS_CTL_262_DATA 0x00000000
+#define DDRSS_CTL_263_DATA 0x00000000
+#define DDRSS_CTL_264_DATA 0x00000000
+#define DDRSS_CTL_265_DATA 0x00000000
+#define DDRSS_CTL_266_DATA 0x00000000
+#define DDRSS_CTL_267_DATA 0x00000000
+#define DDRSS_CTL_268_DATA 0x00000000
+#define DDRSS_CTL_269_DATA 0x00000000
+#define DDRSS_CTL_270_DATA 0x00000000
+#define DDRSS_CTL_271_DATA 0x00000000
+#define DDRSS_CTL_272_DATA 0x00000000
+#define DDRSS_CTL_273_DATA 0x00000000
+#define DDRSS_CTL_274_DATA 0x00000000
+#define DDRSS_CTL_275_DATA 0x00000000
+#define DDRSS_CTL_276_DATA 0x00000000
+#define DDRSS_CTL_277_DATA 0x00010000
+#define DDRSS_CTL_278_DATA 0x00000000
+#define DDRSS_CTL_279_DATA 0x00000000
+#define DDRSS_CTL_280_DATA 0x00000000
+#define DDRSS_CTL_281_DATA 0x00000101
+#define DDRSS_CTL_282_DATA 0x00000000
+#define DDRSS_CTL_283_DATA 0x00000000
+#define DDRSS_CTL_284_DATA 0x00000000
+#define DDRSS_CTL_285_DATA 0x00000000
+#define DDRSS_CTL_286_DATA 0x00000000
+#define DDRSS_CTL_287_DATA 0x00000000
+#define DDRSS_CTL_288_DATA 0x00000000
+#define DDRSS_CTL_289_DATA 0x00000000
+#define DDRSS_CTL_290_DATA 0x0C181511
+#define DDRSS_CTL_291_DATA 0x00000304
+#define DDRSS_CTL_292_DATA 0x00000000
+#define DDRSS_CTL_293_DATA 0x00000000
+#define DDRSS_CTL_294_DATA 0x00000000
+#define DDRSS_CTL_295_DATA 0x00000000
+#define DDRSS_CTL_296_DATA 0x00000000
+#define DDRSS_CTL_297_DATA 0x00000000
+#define DDRSS_CTL_298_DATA 0x00000000
+#define DDRSS_CTL_299_DATA 0x00000000
+#define DDRSS_CTL_300_DATA 0x00000000
+#define DDRSS_CTL_301_DATA 0x00000000
+#define DDRSS_CTL_302_DATA 0x00000000
+#define DDRSS_CTL_303_DATA 0x00000000
+#define DDRSS_CTL_304_DATA 0x00000000
+#define DDRSS_CTL_305_DATA 0x00040000
+#define DDRSS_CTL_306_DATA 0x00800200
+#define DDRSS_CTL_307_DATA 0x00000000
+#define DDRSS_CTL_308_DATA 0x02000400
+#define DDRSS_CTL_309_DATA 0x00000080
+#define DDRSS_CTL_310_DATA 0x00040000
+#define DDRSS_CTL_311_DATA 0x00800200
+#define DDRSS_CTL_312_DATA 0x00000000
+#define DDRSS_CTL_313_DATA 0x00000000
+#define DDRSS_CTL_314_DATA 0x00000000
+#define DDRSS_CTL_315_DATA 0x00000100
+#define DDRSS_CTL_316_DATA 0x01010000
+#define DDRSS_CTL_317_DATA 0x00000000
+#define DDRSS_CTL_318_DATA 0x3FFF0000
+#define DDRSS_CTL_319_DATA 0x000FFF00
+#define DDRSS_CTL_320_DATA 0xFFFFFFFF
+#define DDRSS_CTL_321_DATA 0x000FFF00
+#define DDRSS_CTL_322_DATA 0x0A000000
+#define DDRSS_CTL_323_DATA 0x0001FFFF
+#define DDRSS_CTL_324_DATA 0x01010101
+#define DDRSS_CTL_325_DATA 0x01010101
+#define DDRSS_CTL_326_DATA 0x00000118
+#define DDRSS_CTL_327_DATA 0x00000C01
+#define DDRSS_CTL_328_DATA 0x00000000
+#define DDRSS_CTL_329_DATA 0x00000000
+#define DDRSS_CTL_330_DATA 0x01000000
+#define DDRSS_CTL_331_DATA 0x01000000
+#define DDRSS_CTL_332_DATA 0x00000000
+#define DDRSS_CTL_333_DATA 0x00010000
+#define DDRSS_CTL_334_DATA 0x00000000
+#define DDRSS_CTL_335_DATA 0x00000000
+#define DDRSS_CTL_336_DATA 0x00000000
+#define DDRSS_CTL_337_DATA 0x00000000
+#define DDRSS_CTL_338_DATA 0x00000000
+#define DDRSS_CTL_339_DATA 0x00000000
+#define DDRSS_CTL_340_DATA 0x00000000
+#define DDRSS_CTL_341_DATA 0x00000000
+#define DDRSS_CTL_342_DATA 0x00000000
+#define DDRSS_CTL_343_DATA 0x00000000
+#define DDRSS_CTL_344_DATA 0x00000000
+#define DDRSS_CTL_345_DATA 0x00000000
+#define DDRSS_CTL_346_DATA 0x00000000
+#define DDRSS_CTL_347_DATA 0x00000000
+#define DDRSS_CTL_348_DATA 0x00000000
+#define DDRSS_CTL_349_DATA 0x00000000
+#define DDRSS_CTL_350_DATA 0x00000000
+#define DDRSS_CTL_351_DATA 0x00000000
+#define DDRSS_CTL_352_DATA 0x00000000
+#define DDRSS_CTL_353_DATA 0x00000000
+#define DDRSS_CTL_354_DATA 0x00000000
+#define DDRSS_CTL_355_DATA 0x00000000
+#define DDRSS_CTL_356_DATA 0x00000000
+#define DDRSS_CTL_357_DATA 0x00000000
+#define DDRSS_CTL_358_DATA 0x00000000
+#define DDRSS_CTL_359_DATA 0x00000000
+#define DDRSS_CTL_360_DATA 0x00000000
+#define DDRSS_CTL_361_DATA 0x00000000
+#define DDRSS_CTL_362_DATA 0x00000000
+#define DDRSS_CTL_363_DATA 0x00000000
+#define DDRSS_CTL_364_DATA 0x00000000
+#define DDRSS_CTL_365_DATA 0x00000000
+#define DDRSS_CTL_366_DATA 0x00000000
+#define DDRSS_CTL_367_DATA 0x00000000
+#define DDRSS_CTL_368_DATA 0x00000000
+#define DDRSS_CTL_369_DATA 0x00000000
+#define DDRSS_CTL_370_DATA 0x0C000000
+#define DDRSS_CTL_371_DATA 0x060C0606
+#define DDRSS_CTL_372_DATA 0x06060C06
+#define DDRSS_CTL_373_DATA 0x00010101
+#define DDRSS_CTL_374_DATA 0x02000000
+#define DDRSS_CTL_375_DATA 0x03020101
+#define DDRSS_CTL_376_DATA 0x00000303
+#define DDRSS_CTL_377_DATA 0x02020200
+#define DDRSS_CTL_378_DATA 0x02020202
+#define DDRSS_CTL_379_DATA 0x02020202
+#define DDRSS_CTL_380_DATA 0x02020202
+#define DDRSS_CTL_381_DATA 0x00000000
+#define DDRSS_CTL_382_DATA 0x00000000
+#define DDRSS_CTL_383_DATA 0x04000100
+#define DDRSS_CTL_384_DATA 0x1E000004
+#define DDRSS_CTL_385_DATA 0x000030C0
+#define DDRSS_CTL_386_DATA 0x00000200
+#define DDRSS_CTL_387_DATA 0x00000200
+#define DDRSS_CTL_388_DATA 0x00000200
+#define DDRSS_CTL_389_DATA 0x00000200
+#define DDRSS_CTL_390_DATA 0x0000DB60
+#define DDRSS_CTL_391_DATA 0x0001E780
+#define DDRSS_CTL_392_DATA 0x0A0B0302
+#define DDRSS_CTL_393_DATA 0x001E090A
+#define DDRSS_CTL_394_DATA 0x000030C0
+#define DDRSS_CTL_395_DATA 0x00000200
+#define DDRSS_CTL_396_DATA 0x00000200
+#define DDRSS_CTL_397_DATA 0x00000200
+#define DDRSS_CTL_398_DATA 0x00000200
+#define DDRSS_CTL_399_DATA 0x0000DB60
+#define DDRSS_CTL_400_DATA 0x0001E780
+#define DDRSS_CTL_401_DATA 0x0A0B0302
+#define DDRSS_CTL_402_DATA 0x001E090A
+#define DDRSS_CTL_403_DATA 0x000030C0
+#define DDRSS_CTL_404_DATA 0x00000200
+#define DDRSS_CTL_405_DATA 0x00000200
+#define DDRSS_CTL_406_DATA 0x00000200
+#define DDRSS_CTL_407_DATA 0x00000200
+#define DDRSS_CTL_408_DATA 0x0000DB60
+#define DDRSS_CTL_409_DATA 0x0001E780
+#define DDRSS_CTL_410_DATA 0x0A0B0302
+#define DDRSS_CTL_411_DATA 0x0000090A
+#define DDRSS_CTL_412_DATA 0x00000000
+#define DDRSS_CTL_413_DATA 0x0302000A
+#define DDRSS_CTL_414_DATA 0x01000500
+#define DDRSS_CTL_415_DATA 0x01010001
+#define DDRSS_CTL_416_DATA 0x00010001
+#define DDRSS_CTL_417_DATA 0x01010001
+#define DDRSS_CTL_418_DATA 0x02010000
+#define DDRSS_CTL_419_DATA 0x00000200
+#define DDRSS_CTL_420_DATA 0x02000201
+#define DDRSS_CTL_421_DATA 0x00000000
+#define DDRSS_CTL_422_DATA 0x00202020
+#define DDRSS_PI_0_DATA 0x00000A00
+#define DDRSS_PI_1_DATA 0x00000000
+#define DDRSS_PI_2_DATA 0x00000000
+#define DDRSS_PI_3_DATA 0x01000000
+#define DDRSS_PI_4_DATA 0x00000001
+#define DDRSS_PI_5_DATA 0x00010064
+#define DDRSS_PI_6_DATA 0x00000000
+#define DDRSS_PI_7_DATA 0x00000000
+#define DDRSS_PI_8_DATA 0x00000000
+#define DDRSS_PI_9_DATA 0x00000000
+#define DDRSS_PI_10_DATA 0x00000000
+#define DDRSS_PI_11_DATA 0x00000000
+#define DDRSS_PI_12_DATA 0x00000000
+#define DDRSS_PI_13_DATA 0x00010001
+#define DDRSS_PI_14_DATA 0x00000000
+#define DDRSS_PI_15_DATA 0x00010001
+#define DDRSS_PI_16_DATA 0x00000005
+#define DDRSS_PI_17_DATA 0x00000000
+#define DDRSS_PI_18_DATA 0x00000000
+#define DDRSS_PI_19_DATA 0x00000000
+#define DDRSS_PI_20_DATA 0x00000000
+#define DDRSS_PI_21_DATA 0x00000000
+#define DDRSS_PI_22_DATA 0x00000000
+#define DDRSS_PI_23_DATA 0x00000000
+#define DDRSS_PI_24_DATA 0x280D0001
+#define DDRSS_PI_25_DATA 0x00000000
+#define DDRSS_PI_26_DATA 0x00010000
+#define DDRSS_PI_27_DATA 0x00003200
+#define DDRSS_PI_28_DATA 0x00000000
+#define DDRSS_PI_29_DATA 0x00000000
+#define DDRSS_PI_30_DATA 0x00060602
+#define DDRSS_PI_31_DATA 0x00000000
+#define DDRSS_PI_32_DATA 0x00000000
+#define DDRSS_PI_33_DATA 0x00000000
+#define DDRSS_PI_34_DATA 0x00000001
+#define DDRSS_PI_35_DATA 0x00000055
+#define DDRSS_PI_36_DATA 0x000000AA
+#define DDRSS_PI_37_DATA 0x000000AD
+#define DDRSS_PI_38_DATA 0x00000052
+#define DDRSS_PI_39_DATA 0x0000006A
+#define DDRSS_PI_40_DATA 0x00000095
+#define DDRSS_PI_41_DATA 0x00000095
+#define DDRSS_PI_42_DATA 0x000000AD
+#define DDRSS_PI_43_DATA 0x00000000
+#define DDRSS_PI_44_DATA 0x00000000
+#define DDRSS_PI_45_DATA 0x00010100
+#define DDRSS_PI_46_DATA 0x00000014
+#define DDRSS_PI_47_DATA 0x000007D0
+#define DDRSS_PI_48_DATA 0x00000300
+#define DDRSS_PI_49_DATA 0x00000000
+#define DDRSS_PI_50_DATA 0x00000000
+#define DDRSS_PI_51_DATA 0x01000000
+#define DDRSS_PI_52_DATA 0x00010101
+#define DDRSS_PI_53_DATA 0x01000000
+#define DDRSS_PI_54_DATA 0x00000000
+#define DDRSS_PI_55_DATA 0x00010000
+#define DDRSS_PI_56_DATA 0x00000000
+#define DDRSS_PI_57_DATA 0x00000000
+#define DDRSS_PI_58_DATA 0x00000000
+#define DDRSS_PI_59_DATA 0x00000000
+#define DDRSS_PI_60_DATA 0x00001400
+#define DDRSS_PI_61_DATA 0x00000000
+#define DDRSS_PI_62_DATA 0x01000000
+#define DDRSS_PI_63_DATA 0x00000404
+#define DDRSS_PI_64_DATA 0x00000001
+#define DDRSS_PI_65_DATA 0x0001010E
+#define DDRSS_PI_66_DATA 0x02040100
+#define DDRSS_PI_67_DATA 0x00010000
+#define DDRSS_PI_68_DATA 0x00000034
+#define DDRSS_PI_69_DATA 0x00000000
+#define DDRSS_PI_70_DATA 0x00000000
+#define DDRSS_PI_71_DATA 0x00000000
+#define DDRSS_PI_72_DATA 0x00000000
+#define DDRSS_PI_73_DATA 0x00000000
+#define DDRSS_PI_74_DATA 0x00000000
+#define DDRSS_PI_75_DATA 0x00000005
+#define DDRSS_PI_76_DATA 0x01000000
+#define DDRSS_PI_77_DATA 0x04000100
+#define DDRSS_PI_78_DATA 0x00020000
+#define DDRSS_PI_79_DATA 0x00010002
+#define DDRSS_PI_80_DATA 0x00000001
+#define DDRSS_PI_81_DATA 0x00020001
+#define DDRSS_PI_82_DATA 0x00020002
+#define DDRSS_PI_83_DATA 0x00000000
+#define DDRSS_PI_84_DATA 0x00000000
+#define DDRSS_PI_85_DATA 0x00000000
+#define DDRSS_PI_86_DATA 0x00000000
+#define DDRSS_PI_87_DATA 0x00000000
+#define DDRSS_PI_88_DATA 0x00000000
+#define DDRSS_PI_89_DATA 0x00000000
+#define DDRSS_PI_90_DATA 0x00000000
+#define DDRSS_PI_91_DATA 0x00000300
+#define DDRSS_PI_92_DATA 0x0A090B0C
+#define DDRSS_PI_93_DATA 0x04060708
+#define DDRSS_PI_94_DATA 0x01000005
+#define DDRSS_PI_95_DATA 0x00000800
+#define DDRSS_PI_96_DATA 0x00000000
+#define DDRSS_PI_97_DATA 0x00010008
+#define DDRSS_PI_98_DATA 0x00000000
+#define DDRSS_PI_99_DATA 0x0000AA00
+#define DDRSS_PI_100_DATA 0x00000000
+#define DDRSS_PI_101_DATA 0x00010000
+#define DDRSS_PI_102_DATA 0x00000000
+#define DDRSS_PI_103_DATA 0x00000000
+#define DDRSS_PI_104_DATA 0x00000000
+#define DDRSS_PI_105_DATA 0x00000000
+#define DDRSS_PI_106_DATA 0x00000000
+#define DDRSS_PI_107_DATA 0x00000000
+#define DDRSS_PI_108_DATA 0x00000000
+#define DDRSS_PI_109_DATA 0x00000000
+#define DDRSS_PI_110_DATA 0x00000000
+#define DDRSS_PI_111_DATA 0x00000000
+#define DDRSS_PI_112_DATA 0x00000000
+#define DDRSS_PI_113_DATA 0x00000000
+#define DDRSS_PI_114_DATA 0x00000000
+#define DDRSS_PI_115_DATA 0x00000000
+#define DDRSS_PI_116_DATA 0x00000000
+#define DDRSS_PI_117_DATA 0x00000000
+#define DDRSS_PI_118_DATA 0x00000000
+#define DDRSS_PI_119_DATA 0x00000000
+#define DDRSS_PI_120_DATA 0x00000000
+#define DDRSS_PI_121_DATA 0x00000000
+#define DDRSS_PI_122_DATA 0x00000000
+#define DDRSS_PI_123_DATA 0x00000000
+#define DDRSS_PI_124_DATA 0x00000008
+#define DDRSS_PI_125_DATA 0x00000000
+#define DDRSS_PI_126_DATA 0x00000000
+#define DDRSS_PI_127_DATA 0x00000000
+#define DDRSS_PI_128_DATA 0x00000000
+#define DDRSS_PI_129_DATA 0x00000000
+#define DDRSS_PI_130_DATA 0x00000000
+#define DDRSS_PI_131_DATA 0x00000000
+#define DDRSS_PI_132_DATA 0x00000000
+#define DDRSS_PI_133_DATA 0x00010100
+#define DDRSS_PI_134_DATA 0x00000000
+#define DDRSS_PI_135_DATA 0x00000000
+#define DDRSS_PI_136_DATA 0x00027100
+#define DDRSS_PI_137_DATA 0x00061A80
+#define DDRSS_PI_138_DATA 0x00000100
+#define DDRSS_PI_139_DATA 0x00000000
+#define DDRSS_PI_140_DATA 0x00000000
+#define DDRSS_PI_141_DATA 0x00000000
+#define DDRSS_PI_142_DATA 0x00000000
+#define DDRSS_PI_143_DATA 0x00000000
+#define DDRSS_PI_144_DATA 0x01000000
+#define DDRSS_PI_145_DATA 0x00010003
+#define DDRSS_PI_146_DATA 0x02000101
+#define DDRSS_PI_147_DATA 0x01030001
+#define DDRSS_PI_148_DATA 0x00010400
+#define DDRSS_PI_149_DATA 0x06000105
+#define DDRSS_PI_150_DATA 0x01070001
+#define DDRSS_PI_151_DATA 0x00000000
+#define DDRSS_PI_152_DATA 0x00000000
+#define DDRSS_PI_153_DATA 0x00000000
+#define DDRSS_PI_154_DATA 0x00010000
+#define DDRSS_PI_155_DATA 0x00000000
+#define DDRSS_PI_156_DATA 0x00000000
+#define DDRSS_PI_157_DATA 0x00000000
+#define DDRSS_PI_158_DATA 0x00000000
+#define DDRSS_PI_159_DATA 0x00010000
+#define DDRSS_PI_160_DATA 0x00000004
+#define DDRSS_PI_161_DATA 0x00000000
+#define DDRSS_PI_162_DATA 0x00000000
+#define DDRSS_PI_163_DATA 0x00000000
+#define DDRSS_PI_164_DATA 0x00007800
+#define DDRSS_PI_165_DATA 0x00780078
+#define DDRSS_PI_166_DATA 0x00141414
+#define DDRSS_PI_167_DATA 0x00000038
+#define DDRSS_PI_168_DATA 0x00000038
+#define DDRSS_PI_169_DATA 0x00040038
+#define DDRSS_PI_170_DATA 0x04000400
+#define DDRSS_PI_171_DATA 0xC8040009
+#define DDRSS_PI_172_DATA 0x04000918
+#define DDRSS_PI_173_DATA 0x000918C8
+#define DDRSS_PI_174_DATA 0x0018C804
+#define DDRSS_PI_175_DATA 0x00000118
+#define DDRSS_PI_176_DATA 0x00001860
+#define DDRSS_PI_177_DATA 0x00000118
+#define DDRSS_PI_178_DATA 0x00001860
+#define DDRSS_PI_179_DATA 0x00000118
+#define DDRSS_PI_180_DATA 0x04001860
+#define DDRSS_PI_181_DATA 0x01010404
+#define DDRSS_PI_182_DATA 0x00001901
+#define DDRSS_PI_183_DATA 0x00190019
+#define DDRSS_PI_184_DATA 0x010C010C
+#define DDRSS_PI_185_DATA 0x0000010C
+#define DDRSS_PI_186_DATA 0x00000000
+#define DDRSS_PI_187_DATA 0x03000000
+#define DDRSS_PI_188_DATA 0x01010303
+#define DDRSS_PI_189_DATA 0x01010101
+#define DDRSS_PI_190_DATA 0x00181818
+#define DDRSS_PI_191_DATA 0x00000000
+#define DDRSS_PI_192_DATA 0x00000000
+#define DDRSS_PI_193_DATA 0x0B000000
+#define DDRSS_PI_194_DATA 0x0A0A0B0B
+#define DDRSS_PI_195_DATA 0x0303030A
+#define DDRSS_PI_196_DATA 0x00000000
+#define DDRSS_PI_197_DATA 0x00000000
+#define DDRSS_PI_198_DATA 0x00000000
+#define DDRSS_PI_199_DATA 0x00000000
+#define DDRSS_PI_200_DATA 0x00000000
+#define DDRSS_PI_201_DATA 0x00000000
+#define DDRSS_PI_202_DATA 0x00000000
+#define DDRSS_PI_203_DATA 0x00000000
+#define DDRSS_PI_204_DATA 0x00000000
+#define DDRSS_PI_205_DATA 0x00000000
+#define DDRSS_PI_206_DATA 0x00000000
+#define DDRSS_PI_207_DATA 0x00000000
+#define DDRSS_PI_208_DATA 0x00000000
+#define DDRSS_PI_209_DATA 0x0D090000
+#define DDRSS_PI_210_DATA 0x0D09000D
+#define DDRSS_PI_211_DATA 0x0D09000D
+#define DDRSS_PI_212_DATA 0x0000000D
+#define DDRSS_PI_213_DATA 0x00000000
+#define DDRSS_PI_214_DATA 0x00000000
+#define DDRSS_PI_215_DATA 0x00000000
+#define DDRSS_PI_216_DATA 0x00000000
+#define DDRSS_PI_217_DATA 0x16000000
+#define DDRSS_PI_218_DATA 0x001600C8
+#define DDRSS_PI_219_DATA 0x001600C8
+#define DDRSS_PI_220_DATA 0x010100C8
+#define DDRSS_PI_221_DATA 0x00001B01
+#define DDRSS_PI_222_DATA 0x1F0F0051
+#define DDRSS_PI_223_DATA 0x03000001
+#define DDRSS_PI_224_DATA 0x001B0A0B
+#define DDRSS_PI_225_DATA 0x1F0F0051
+#define DDRSS_PI_226_DATA 0x03000001
+#define DDRSS_PI_227_DATA 0x001B0A0B
+#define DDRSS_PI_228_DATA 0x1F0F0051
+#define DDRSS_PI_229_DATA 0x03000001
+#define DDRSS_PI_230_DATA 0x00000A0B
+#define DDRSS_PI_231_DATA 0x0C0B0700
+#define DDRSS_PI_232_DATA 0x000D0605
+#define DDRSS_PI_233_DATA 0x0000C570
+#define DDRSS_PI_234_DATA 0x0000001D
+#define DDRSS_PI_235_DATA 0x180A0800
+#define DDRSS_PI_236_DATA 0x0B071C1C
+#define DDRSS_PI_237_DATA 0x0D06050C
+#define DDRSS_PI_238_DATA 0x0000C570
+#define DDRSS_PI_239_DATA 0x0000001D
+#define DDRSS_PI_240_DATA 0x180A0800
+#define DDRSS_PI_241_DATA 0x0B071C1C
+#define DDRSS_PI_242_DATA 0x0D06050C
+#define DDRSS_PI_243_DATA 0x0000C570
+#define DDRSS_PI_244_DATA 0x0000001D
+#define DDRSS_PI_245_DATA 0x180A0800
+#define DDRSS_PI_246_DATA 0x00001C1C
+#define DDRSS_PI_247_DATA 0x000030C0
+#define DDRSS_PI_248_DATA 0x0001E780
+#define DDRSS_PI_249_DATA 0x000030C0
+#define DDRSS_PI_250_DATA 0x0001E780
+#define DDRSS_PI_251_DATA 0x000030C0
+#define DDRSS_PI_252_DATA 0x0001E780
+#define DDRSS_PI_253_DATA 0x02550255
+#define DDRSS_PI_254_DATA 0x03030255
+#define DDRSS_PI_255_DATA 0x00025503
+#define DDRSS_PI_256_DATA 0x02550255
+#define DDRSS_PI_257_DATA 0x0C080C08
+#define DDRSS_PI_258_DATA 0x00000C08
+#define DDRSS_PI_259_DATA 0x000890B8
+#define DDRSS_PI_260_DATA 0x00000000
+#define DDRSS_PI_261_DATA 0x00000000
+#define DDRSS_PI_262_DATA 0x00000000
+#define DDRSS_PI_263_DATA 0x00000120
+#define DDRSS_PI_264_DATA 0x000890B8
+#define DDRSS_PI_265_DATA 0x00000000
+#define DDRSS_PI_266_DATA 0x00000000
+#define DDRSS_PI_267_DATA 0x00000000
+#define DDRSS_PI_268_DATA 0x00000120
+#define DDRSS_PI_269_DATA 0x000890B8
+#define DDRSS_PI_270_DATA 0x00000000
+#define DDRSS_PI_271_DATA 0x00000000
+#define DDRSS_PI_272_DATA 0x00000000
+#define DDRSS_PI_273_DATA 0x02000120
+#define DDRSS_PI_274_DATA 0x00000080
+#define DDRSS_PI_275_DATA 0x00020000
+#define DDRSS_PI_276_DATA 0x00000080
+#define DDRSS_PI_277_DATA 0x00020000
+#define DDRSS_PI_278_DATA 0x00000080
+#define DDRSS_PI_279_DATA 0x00000000
+#define DDRSS_PI_280_DATA 0x00000000
+#define DDRSS_PI_281_DATA 0x00040404
+#define DDRSS_PI_282_DATA 0x00000000
+#define DDRSS_PI_283_DATA 0x02010102
+#define DDRSS_PI_284_DATA 0x67676767
+#define DDRSS_PI_285_DATA 0x00000202
+#define DDRSS_PI_286_DATA 0x00000000
+#define DDRSS_PI_287_DATA 0x00000000
+#define DDRSS_PI_288_DATA 0x00000000
+#define DDRSS_PI_289_DATA 0x00000000
+#define DDRSS_PI_290_DATA 0x00000000
+#define DDRSS_PI_291_DATA 0x0D100F00
+#define DDRSS_PI_292_DATA 0x0003020E
+#define DDRSS_PI_293_DATA 0x00000001
+#define DDRSS_PI_294_DATA 0x01000000
+#define DDRSS_PI_295_DATA 0x00020201
+#define DDRSS_PI_296_DATA 0x00000000
+#define DDRSS_PI_297_DATA 0x00000414
+#define DDRSS_PI_298_DATA 0x00000301
+#define DDRSS_PI_299_DATA 0x00000000
+#define DDRSS_PI_300_DATA 0x00000000
+#define DDRSS_PI_301_DATA 0x00000000
+#define DDRSS_PI_302_DATA 0x00000401
+#define DDRSS_PI_303_DATA 0x00000493
+#define DDRSS_PI_304_DATA 0x00000000
+#define DDRSS_PI_305_DATA 0x00000414
+#define DDRSS_PI_306_DATA 0x00000301
+#define DDRSS_PI_307_DATA 0x00000000
+#define DDRSS_PI_308_DATA 0x00000000
+#define DDRSS_PI_309_DATA 0x00000000
+#define DDRSS_PI_310_DATA 0x00000401
+#define DDRSS_PI_311_DATA 0x00000493
+#define DDRSS_PI_312_DATA 0x00000000
+#define DDRSS_PI_313_DATA 0x00000414
+#define DDRSS_PI_314_DATA 0x00000301
+#define DDRSS_PI_315_DATA 0x00000000
+#define DDRSS_PI_316_DATA 0x00000000
+#define DDRSS_PI_317_DATA 0x00000000
+#define DDRSS_PI_318_DATA 0x00000401
+#define DDRSS_PI_319_DATA 0x00000493
+#define DDRSS_PI_320_DATA 0x00000000
+#define DDRSS_PI_321_DATA 0x00000414
+#define DDRSS_PI_322_DATA 0x00000301
+#define DDRSS_PI_323_DATA 0x00000000
+#define DDRSS_PI_324_DATA 0x00000000
+#define DDRSS_PI_325_DATA 0x00000000
+#define DDRSS_PI_326_DATA 0x00000401
+#define DDRSS_PI_327_DATA 0x00000493
+#define DDRSS_PI_328_DATA 0x00000000
+#define DDRSS_PI_329_DATA 0x00000414
+#define DDRSS_PI_330_DATA 0x00000301
+#define DDRSS_PI_331_DATA 0x00000000
+#define DDRSS_PI_332_DATA 0x00000000
+#define DDRSS_PI_333_DATA 0x00000000
+#define DDRSS_PI_334_DATA 0x00000401
+#define DDRSS_PI_335_DATA 0x00000493
+#define DDRSS_PI_336_DATA 0x00000000
+#define DDRSS_PI_337_DATA 0x00000414
+#define DDRSS_PI_338_DATA 0x00000301
+#define DDRSS_PI_339_DATA 0x00000000
+#define DDRSS_PI_340_DATA 0x00000000
+#define DDRSS_PI_341_DATA 0x00000000
+#define DDRSS_PI_342_DATA 0x00000401
+#define DDRSS_PI_343_DATA 0x00000493
+#define DDRSS_PI_344_DATA 0x00000000
+#define DDRSS_PHY_0_DATA 0x04C00000
+#define DDRSS_PHY_1_DATA 0x00000000
+#define DDRSS_PHY_2_DATA 0x00000200
+#define DDRSS_PHY_3_DATA 0x00000000
+#define DDRSS_PHY_4_DATA 0x00000000
+#define DDRSS_PHY_5_DATA 0x00000000
+#define DDRSS_PHY_6_DATA 0x00000000
+#define DDRSS_PHY_7_DATA 0x00000000
+#define DDRSS_PHY_8_DATA 0x00000001
+#define DDRSS_PHY_9_DATA 0x00000000
+#define DDRSS_PHY_10_DATA 0x00000000
+#define DDRSS_PHY_11_DATA 0x010101FF
+#define DDRSS_PHY_12_DATA 0x00010000
+#define DDRSS_PHY_13_DATA 0x00C00004
+#define DDRSS_PHY_14_DATA 0x00CC0008
+#define DDRSS_PHY_15_DATA 0x00660201
+#define DDRSS_PHY_16_DATA 0x00000000
+#define DDRSS_PHY_17_DATA 0x00000000
+#define DDRSS_PHY_18_DATA 0x00000000
+#define DDRSS_PHY_19_DATA 0x0000AAAA
+#define DDRSS_PHY_20_DATA 0x00005555
+#define DDRSS_PHY_21_DATA 0x0000B5B5
+#define DDRSS_PHY_22_DATA 0x00004A4A
+#define DDRSS_PHY_23_DATA 0x00005656
+#define DDRSS_PHY_24_DATA 0x0000A9A9
+#define DDRSS_PHY_25_DATA 0x0000B7B7
+#define DDRSS_PHY_26_DATA 0x00004848
+#define DDRSS_PHY_27_DATA 0x00000000
+#define DDRSS_PHY_28_DATA 0x00000000
+#define DDRSS_PHY_29_DATA 0x08000000
+#define DDRSS_PHY_30_DATA 0x0F000008
+#define DDRSS_PHY_31_DATA 0x00000F0F
+#define DDRSS_PHY_32_DATA 0x00E4E400
+#define DDRSS_PHY_33_DATA 0x00070820
+#define DDRSS_PHY_34_DATA 0x000C0020
+#define DDRSS_PHY_35_DATA 0x00062000
+#define DDRSS_PHY_36_DATA 0x00000000
+#define DDRSS_PHY_37_DATA 0x55555555
+#define DDRSS_PHY_38_DATA 0xAAAAAAAA
+#define DDRSS_PHY_39_DATA 0x55555555
+#define DDRSS_PHY_40_DATA 0xAAAAAAAA
+#define DDRSS_PHY_41_DATA 0x00005555
+#define DDRSS_PHY_42_DATA 0x01000100
+#define DDRSS_PHY_43_DATA 0x00800180
+#define DDRSS_PHY_44_DATA 0x00000000
+#define DDRSS_PHY_45_DATA 0x00000000
+#define DDRSS_PHY_46_DATA 0x00000000
+#define DDRSS_PHY_47_DATA 0x00000000
+#define DDRSS_PHY_48_DATA 0x00000000
+#define DDRSS_PHY_49_DATA 0x00000000
+#define DDRSS_PHY_50_DATA 0x00000000
+#define DDRSS_PHY_51_DATA 0x00000000
+#define DDRSS_PHY_52_DATA 0x00000000
+#define DDRSS_PHY_53_DATA 0x00000000
+#define DDRSS_PHY_54_DATA 0x00000000
+#define DDRSS_PHY_55_DATA 0x00000000
+#define DDRSS_PHY_56_DATA 0x00000000
+#define DDRSS_PHY_57_DATA 0x00000000
+#define DDRSS_PHY_58_DATA 0x00000000
+#define DDRSS_PHY_59_DATA 0x00000000
+#define DDRSS_PHY_60_DATA 0x00000000
+#define DDRSS_PHY_61_DATA 0x00000000
+#define DDRSS_PHY_62_DATA 0x00000000
+#define DDRSS_PHY_63_DATA 0x00000000
+#define DDRSS_PHY_64_DATA 0x00000000
+#define DDRSS_PHY_65_DATA 0x00000004
+#define DDRSS_PHY_66_DATA 0x00000000
+#define DDRSS_PHY_67_DATA 0x00000000
+#define DDRSS_PHY_68_DATA 0x00000000
+#define DDRSS_PHY_69_DATA 0x00000000
+#define DDRSS_PHY_70_DATA 0x00000000
+#define DDRSS_PHY_71_DATA 0x00000000
+#define DDRSS_PHY_72_DATA 0x041F07FF
+#define DDRSS_PHY_73_DATA 0x00000000
+#define DDRSS_PHY_74_DATA 0x01CCB001
+#define DDRSS_PHY_75_DATA 0x2000CCB0
+#define DDRSS_PHY_76_DATA 0x20000140
+#define DDRSS_PHY_77_DATA 0x07FF0200
+#define DDRSS_PHY_78_DATA 0x0000DD01
+#define DDRSS_PHY_79_DATA 0x10100303
+#define DDRSS_PHY_80_DATA 0x10101010
+#define DDRSS_PHY_81_DATA 0x10101010
+#define DDRSS_PHY_82_DATA 0x00021010
+#define DDRSS_PHY_83_DATA 0x00100010
+#define DDRSS_PHY_84_DATA 0x00100010
+#define DDRSS_PHY_85_DATA 0x00100010
+#define DDRSS_PHY_86_DATA 0x00100010
+#define DDRSS_PHY_87_DATA 0x02020010
+#define DDRSS_PHY_88_DATA 0x51515041
+#define DDRSS_PHY_89_DATA 0x31804000
+#define DDRSS_PHY_90_DATA 0x04BF0340
+#define DDRSS_PHY_91_DATA 0x01008080
+#define DDRSS_PHY_92_DATA 0x04050000
+#define DDRSS_PHY_93_DATA 0x00000504
+#define DDRSS_PHY_94_DATA 0x42100010
+#define DDRSS_PHY_95_DATA 0x010C053E
+#define DDRSS_PHY_96_DATA 0x000F0C14
+#define DDRSS_PHY_97_DATA 0x01000140
+#define DDRSS_PHY_98_DATA 0x007A0120
+#define DDRSS_PHY_99_DATA 0x00000C00
+#define DDRSS_PHY_100_DATA 0x000001CC
+#define DDRSS_PHY_101_DATA 0x20100200
+#define DDRSS_PHY_102_DATA 0x00000005
+#define DDRSS_PHY_103_DATA 0x76543210
+#define DDRSS_PHY_104_DATA 0x00000008
+#define DDRSS_PHY_105_DATA 0x02800280
+#define DDRSS_PHY_106_DATA 0x02800280
+#define DDRSS_PHY_107_DATA 0x02800280
+#define DDRSS_PHY_108_DATA 0x02800280
+#define DDRSS_PHY_109_DATA 0x00000280
+#define DDRSS_PHY_110_DATA 0x00008000
+#define DDRSS_PHY_111_DATA 0x00800080
+#define DDRSS_PHY_112_DATA 0x00800080
+#define DDRSS_PHY_113_DATA 0x00800080
+#define DDRSS_PHY_114_DATA 0x00800080
+#define DDRSS_PHY_115_DATA 0x00800080
+#define DDRSS_PHY_116_DATA 0x00800080
+#define DDRSS_PHY_117_DATA 0x00800080
+#define DDRSS_PHY_118_DATA 0x00800080
+#define DDRSS_PHY_119_DATA 0x01000080
+#define DDRSS_PHY_120_DATA 0x01A00000
+#define DDRSS_PHY_121_DATA 0x00000000
+#define DDRSS_PHY_122_DATA 0x00000000
+#define DDRSS_PHY_123_DATA 0x00080200
+#define DDRSS_PHY_124_DATA 0x00000000
+#define DDRSS_PHY_125_DATA 0x00000000
+#define DDRSS_PHY_126_DATA 0x00000000
+#define DDRSS_PHY_127_DATA 0x00000000
+#define DDRSS_PHY_128_DATA 0x00000000
+#define DDRSS_PHY_129_DATA 0x00000000
+#define DDRSS_PHY_130_DATA 0x00000000
+#define DDRSS_PHY_131_DATA 0x00000000
+#define DDRSS_PHY_132_DATA 0x00000000
+#define DDRSS_PHY_133_DATA 0x00000000
+#define DDRSS_PHY_134_DATA 0x00000000
+#define DDRSS_PHY_135_DATA 0x00000000
+#define DDRSS_PHY_136_DATA 0x00000000
+#define DDRSS_PHY_137_DATA 0x00000000
+#define DDRSS_PHY_138_DATA 0x00000000
+#define DDRSS_PHY_139_DATA 0x00000000
+#define DDRSS_PHY_140_DATA 0x00000000
+#define DDRSS_PHY_141_DATA 0x00000000
+#define DDRSS_PHY_142_DATA 0x00000000
+#define DDRSS_PHY_143_DATA 0x00000000
+#define DDRSS_PHY_144_DATA 0x00000000
+#define DDRSS_PHY_145_DATA 0x00000000
+#define DDRSS_PHY_146_DATA 0x00000000
+#define DDRSS_PHY_147_DATA 0x00000000
+#define DDRSS_PHY_148_DATA 0x00000000
+#define DDRSS_PHY_149_DATA 0x00000000
+#define DDRSS_PHY_150_DATA 0x00000000
+#define DDRSS_PHY_151_DATA 0x00000000
+#define DDRSS_PHY_152_DATA 0x00000000
+#define DDRSS_PHY_153_DATA 0x00000000
+#define DDRSS_PHY_154_DATA 0x00000000
+#define DDRSS_PHY_155_DATA 0x00000000
+#define DDRSS_PHY_156_DATA 0x00000000
+#define DDRSS_PHY_157_DATA 0x00000000
+#define DDRSS_PHY_158_DATA 0x00000000
+#define DDRSS_PHY_159_DATA 0x00000000
+#define DDRSS_PHY_160_DATA 0x00000000
+#define DDRSS_PHY_161_DATA 0x00000000
+#define DDRSS_PHY_162_DATA 0x00000000
+#define DDRSS_PHY_163_DATA 0x00000000
+#define DDRSS_PHY_164_DATA 0x00000000
+#define DDRSS_PHY_165_DATA 0x00000000
+#define DDRSS_PHY_166_DATA 0x00000000
+#define DDRSS_PHY_167_DATA 0x00000000
+#define DDRSS_PHY_168_DATA 0x00000000
+#define DDRSS_PHY_169_DATA 0x00000000
+#define DDRSS_PHY_170_DATA 0x00000000
+#define DDRSS_PHY_171_DATA 0x00000000
+#define DDRSS_PHY_172_DATA 0x00000000
+#define DDRSS_PHY_173_DATA 0x00000000
+#define DDRSS_PHY_174_DATA 0x00000000
+#define DDRSS_PHY_175_DATA 0x00000000
+#define DDRSS_PHY_176_DATA 0x00000000
+#define DDRSS_PHY_177_DATA 0x00000000
+#define DDRSS_PHY_178_DATA 0x00000000
+#define DDRSS_PHY_179_DATA 0x00000000
+#define DDRSS_PHY_180_DATA 0x00000000
+#define DDRSS_PHY_181_DATA 0x00000000
+#define DDRSS_PHY_182_DATA 0x00000000
+#define DDRSS_PHY_183_DATA 0x00000000
+#define DDRSS_PHY_184_DATA 0x00000000
+#define DDRSS_PHY_185_DATA 0x00000000
+#define DDRSS_PHY_186_DATA 0x00000000
+#define DDRSS_PHY_187_DATA 0x00000000
+#define DDRSS_PHY_188_DATA 0x00000000
+#define DDRSS_PHY_189_DATA 0x00000000
+#define DDRSS_PHY_190_DATA 0x00000000
+#define DDRSS_PHY_191_DATA 0x00000000
+#define DDRSS_PHY_192_DATA 0x00000000
+#define DDRSS_PHY_193_DATA 0x00000000
+#define DDRSS_PHY_194_DATA 0x00000000
+#define DDRSS_PHY_195_DATA 0x00000000
+#define DDRSS_PHY_196_DATA 0x00000000
+#define DDRSS_PHY_197_DATA 0x00000000
+#define DDRSS_PHY_198_DATA 0x00000000
+#define DDRSS_PHY_199_DATA 0x00000000
+#define DDRSS_PHY_200_DATA 0x00000000
+#define DDRSS_PHY_201_DATA 0x00000000
+#define DDRSS_PHY_202_DATA 0x00000000
+#define DDRSS_PHY_203_DATA 0x00000000
+#define DDRSS_PHY_204_DATA 0x00000000
+#define DDRSS_PHY_205_DATA 0x00000000
+#define DDRSS_PHY_206_DATA 0x00000000
+#define DDRSS_PHY_207_DATA 0x00000000
+#define DDRSS_PHY_208_DATA 0x00000000
+#define DDRSS_PHY_209_DATA 0x00000000
+#define DDRSS_PHY_210_DATA 0x00000000
+#define DDRSS_PHY_211_DATA 0x00000000
+#define DDRSS_PHY_212_DATA 0x00000000
+#define DDRSS_PHY_213_DATA 0x00000000
+#define DDRSS_PHY_214_DATA 0x00000000
+#define DDRSS_PHY_215_DATA 0x00000000
+#define DDRSS_PHY_216_DATA 0x00000000
+#define DDRSS_PHY_217_DATA 0x00000000
+#define DDRSS_PHY_218_DATA 0x00000000
+#define DDRSS_PHY_219_DATA 0x00000000
+#define DDRSS_PHY_220_DATA 0x00000000
+#define DDRSS_PHY_221_DATA 0x00000000
+#define DDRSS_PHY_222_DATA 0x00000000
+#define DDRSS_PHY_223_DATA 0x00000000
+#define DDRSS_PHY_224_DATA 0x00000000
+#define DDRSS_PHY_225_DATA 0x00000000
+#define DDRSS_PHY_226_DATA 0x00000000
+#define DDRSS_PHY_227_DATA 0x00000000
+#define DDRSS_PHY_228_DATA 0x00000000
+#define DDRSS_PHY_229_DATA 0x00000000
+#define DDRSS_PHY_230_DATA 0x00000000
+#define DDRSS_PHY_231_DATA 0x00000000
+#define DDRSS_PHY_232_DATA 0x00000000
+#define DDRSS_PHY_233_DATA 0x00000000
+#define DDRSS_PHY_234_DATA 0x00000000
+#define DDRSS_PHY_235_DATA 0x00000000
+#define DDRSS_PHY_236_DATA 0x00000000
+#define DDRSS_PHY_237_DATA 0x00000000
+#define DDRSS_PHY_238_DATA 0x00000000
+#define DDRSS_PHY_239_DATA 0x00000000
+#define DDRSS_PHY_240_DATA 0x00000000
+#define DDRSS_PHY_241_DATA 0x00000000
+#define DDRSS_PHY_242_DATA 0x00000000
+#define DDRSS_PHY_243_DATA 0x00000000
+#define DDRSS_PHY_244_DATA 0x00000000
+#define DDRSS_PHY_245_DATA 0x00000000
+#define DDRSS_PHY_246_DATA 0x00000000
+#define DDRSS_PHY_247_DATA 0x00000000
+#define DDRSS_PHY_248_DATA 0x00000000
+#define DDRSS_PHY_249_DATA 0x00000000
+#define DDRSS_PHY_250_DATA 0x00000000
+#define DDRSS_PHY_251_DATA 0x00000000
+#define DDRSS_PHY_252_DATA 0x00000000
+#define DDRSS_PHY_253_DATA 0x00000000
+#define DDRSS_PHY_254_DATA 0x00000000
+#define DDRSS_PHY_255_DATA 0x00000000
+#define DDRSS_PHY_256_DATA 0x04C00000
+#define DDRSS_PHY_257_DATA 0x00000000
+#define DDRSS_PHY_258_DATA 0x00000200
+#define DDRSS_PHY_259_DATA 0x00000000
+#define DDRSS_PHY_260_DATA 0x00000000
+#define DDRSS_PHY_261_DATA 0x00000000
+#define DDRSS_PHY_262_DATA 0x00000000
+#define DDRSS_PHY_263_DATA 0x00000000
+#define DDRSS_PHY_264_DATA 0x00000001
+#define DDRSS_PHY_265_DATA 0x00000000
+#define DDRSS_PHY_266_DATA 0x00000000
+#define DDRSS_PHY_267_DATA 0x010101FF
+#define DDRSS_PHY_268_DATA 0x00010000
+#define DDRSS_PHY_269_DATA 0x00C00004
+#define DDRSS_PHY_270_DATA 0x00CC0008
+#define DDRSS_PHY_271_DATA 0x00660201
+#define DDRSS_PHY_272_DATA 0x00000000
+#define DDRSS_PHY_273_DATA 0x00000000
+#define DDRSS_PHY_274_DATA 0x00000000
+#define DDRSS_PHY_275_DATA 0x0000AAAA
+#define DDRSS_PHY_276_DATA 0x00005555
+#define DDRSS_PHY_277_DATA 0x0000B5B5
+#define DDRSS_PHY_278_DATA 0x00004A4A
+#define DDRSS_PHY_279_DATA 0x00005656
+#define DDRSS_PHY_280_DATA 0x0000A9A9
+#define DDRSS_PHY_281_DATA 0x0000B7B7
+#define DDRSS_PHY_282_DATA 0x00004848
+#define DDRSS_PHY_283_DATA 0x00000000
+#define DDRSS_PHY_284_DATA 0x00000000
+#define DDRSS_PHY_285_DATA 0x08000000
+#define DDRSS_PHY_286_DATA 0x0F000008
+#define DDRSS_PHY_287_DATA 0x00000F0F
+#define DDRSS_PHY_288_DATA 0x00E4E400
+#define DDRSS_PHY_289_DATA 0x00070820
+#define DDRSS_PHY_290_DATA 0x000C0020
+#define DDRSS_PHY_291_DATA 0x00062000
+#define DDRSS_PHY_292_DATA 0x00000000
+#define DDRSS_PHY_293_DATA 0x55555555
+#define DDRSS_PHY_294_DATA 0xAAAAAAAA
+#define DDRSS_PHY_295_DATA 0x55555555
+#define DDRSS_PHY_296_DATA 0xAAAAAAAA
+#define DDRSS_PHY_297_DATA 0x00005555
+#define DDRSS_PHY_298_DATA 0x01000100
+#define DDRSS_PHY_299_DATA 0x00800180
+#define DDRSS_PHY_300_DATA 0x00000000
+#define DDRSS_PHY_301_DATA 0x00000000
+#define DDRSS_PHY_302_DATA 0x00000000
+#define DDRSS_PHY_303_DATA 0x00000000
+#define DDRSS_PHY_304_DATA 0x00000000
+#define DDRSS_PHY_305_DATA 0x00000000
+#define DDRSS_PHY_306_DATA 0x00000000
+#define DDRSS_PHY_307_DATA 0x00000000
+#define DDRSS_PHY_308_DATA 0x00000000
+#define DDRSS_PHY_309_DATA 0x00000000
+#define DDRSS_PHY_310_DATA 0x00000000
+#define DDRSS_PHY_311_DATA 0x00000000
+#define DDRSS_PHY_312_DATA 0x00000000
+#define DDRSS_PHY_313_DATA 0x00000000
+#define DDRSS_PHY_314_DATA 0x00000000
+#define DDRSS_PHY_315_DATA 0x00000000
+#define DDRSS_PHY_316_DATA 0x00000000
+#define DDRSS_PHY_317_DATA 0x00000000
+#define DDRSS_PHY_318_DATA 0x00000000
+#define DDRSS_PHY_319_DATA 0x00000000
+#define DDRSS_PHY_320_DATA 0x00000000
+#define DDRSS_PHY_321_DATA 0x00000004
+#define DDRSS_PHY_322_DATA 0x00000000
+#define DDRSS_PHY_323_DATA 0x00000000
+#define DDRSS_PHY_324_DATA 0x00000000
+#define DDRSS_PHY_325_DATA 0x00000000
+#define DDRSS_PHY_326_DATA 0x00000000
+#define DDRSS_PHY_327_DATA 0x00000000
+#define DDRSS_PHY_328_DATA 0x041F07FF
+#define DDRSS_PHY_329_DATA 0x00000000
+#define DDRSS_PHY_330_DATA 0x01CCB001
+#define DDRSS_PHY_331_DATA 0x2000CCB0
+#define DDRSS_PHY_332_DATA 0x20000140
+#define DDRSS_PHY_333_DATA 0x07FF0200
+#define DDRSS_PHY_334_DATA 0x0000DD01
+#define DDRSS_PHY_335_DATA 0x10100303
+#define DDRSS_PHY_336_DATA 0x10101010
+#define DDRSS_PHY_337_DATA 0x10101010
+#define DDRSS_PHY_338_DATA 0x00021010
+#define DDRSS_PHY_339_DATA 0x00100010
+#define DDRSS_PHY_340_DATA 0x00100010
+#define DDRSS_PHY_341_DATA 0x00100010
+#define DDRSS_PHY_342_DATA 0x00100010
+#define DDRSS_PHY_343_DATA 0x02020010
+#define DDRSS_PHY_344_DATA 0x51515041
+#define DDRSS_PHY_345_DATA 0x31804000
+#define DDRSS_PHY_346_DATA 0x04BF0340
+#define DDRSS_PHY_347_DATA 0x01008080
+#define DDRSS_PHY_348_DATA 0x04050000
+#define DDRSS_PHY_349_DATA 0x00000504
+#define DDRSS_PHY_350_DATA 0x42100010
+#define DDRSS_PHY_351_DATA 0x010C053E
+#define DDRSS_PHY_352_DATA 0x000F0C14
+#define DDRSS_PHY_353_DATA 0x01000140
+#define DDRSS_PHY_354_DATA 0x007A0120
+#define DDRSS_PHY_355_DATA 0x00000C00
+#define DDRSS_PHY_356_DATA 0x000001CC
+#define DDRSS_PHY_357_DATA 0x20100200
+#define DDRSS_PHY_358_DATA 0x00000005
+#define DDRSS_PHY_359_DATA 0x76543210
+#define DDRSS_PHY_360_DATA 0x00000008
+#define DDRSS_PHY_361_DATA 0x02800280
+#define DDRSS_PHY_362_DATA 0x02800280
+#define DDRSS_PHY_363_DATA 0x02800280
+#define DDRSS_PHY_364_DATA 0x02800280
+#define DDRSS_PHY_365_DATA 0x00000280
+#define DDRSS_PHY_366_DATA 0x00008000
+#define DDRSS_PHY_367_DATA 0x00800080
+#define DDRSS_PHY_368_DATA 0x00800080
+#define DDRSS_PHY_369_DATA 0x00800080
+#define DDRSS_PHY_370_DATA 0x00800080
+#define DDRSS_PHY_371_DATA 0x00800080
+#define DDRSS_PHY_372_DATA 0x00800080
+#define DDRSS_PHY_373_DATA 0x00800080
+#define DDRSS_PHY_374_DATA 0x00800080
+#define DDRSS_PHY_375_DATA 0x01000080
+#define DDRSS_PHY_376_DATA 0x01A00000
+#define DDRSS_PHY_377_DATA 0x00000000
+#define DDRSS_PHY_378_DATA 0x00000000
+#define DDRSS_PHY_379_DATA 0x00080200
+#define DDRSS_PHY_380_DATA 0x00000000
+#define DDRSS_PHY_381_DATA 0x00000000
+#define DDRSS_PHY_382_DATA 0x00000000
+#define DDRSS_PHY_383_DATA 0x00000000
+#define DDRSS_PHY_384_DATA 0x00000000
+#define DDRSS_PHY_385_DATA 0x00000000
+#define DDRSS_PHY_386_DATA 0x00000000
+#define DDRSS_PHY_387_DATA 0x00000000
+#define DDRSS_PHY_388_DATA 0x00000000
+#define DDRSS_PHY_389_DATA 0x00000000
+#define DDRSS_PHY_390_DATA 0x00000000
+#define DDRSS_PHY_391_DATA 0x00000000
+#define DDRSS_PHY_392_DATA 0x00000000
+#define DDRSS_PHY_393_DATA 0x00000000
+#define DDRSS_PHY_394_DATA 0x00000000
+#define DDRSS_PHY_395_DATA 0x00000000
+#define DDRSS_PHY_396_DATA 0x00000000
+#define DDRSS_PHY_397_DATA 0x00000000
+#define DDRSS_PHY_398_DATA 0x00000000
+#define DDRSS_PHY_399_DATA 0x00000000
+#define DDRSS_PHY_400_DATA 0x00000000
+#define DDRSS_PHY_401_DATA 0x00000000
+#define DDRSS_PHY_402_DATA 0x00000000
+#define DDRSS_PHY_403_DATA 0x00000000
+#define DDRSS_PHY_404_DATA 0x00000000
+#define DDRSS_PHY_405_DATA 0x00000000
+#define DDRSS_PHY_406_DATA 0x00000000
+#define DDRSS_PHY_407_DATA 0x00000000
+#define DDRSS_PHY_408_DATA 0x00000000
+#define DDRSS_PHY_409_DATA 0x00000000
+#define DDRSS_PHY_410_DATA 0x00000000
+#define DDRSS_PHY_411_DATA 0x00000000
+#define DDRSS_PHY_412_DATA 0x00000000
+#define DDRSS_PHY_413_DATA 0x00000000
+#define DDRSS_PHY_414_DATA 0x00000000
+#define DDRSS_PHY_415_DATA 0x00000000
+#define DDRSS_PHY_416_DATA 0x00000000
+#define DDRSS_PHY_417_DATA 0x00000000
+#define DDRSS_PHY_418_DATA 0x00000000
+#define DDRSS_PHY_419_DATA 0x00000000
+#define DDRSS_PHY_420_DATA 0x00000000
+#define DDRSS_PHY_421_DATA 0x00000000
+#define DDRSS_PHY_422_DATA 0x00000000
+#define DDRSS_PHY_423_DATA 0x00000000
+#define DDRSS_PHY_424_DATA 0x00000000
+#define DDRSS_PHY_425_DATA 0x00000000
+#define DDRSS_PHY_426_DATA 0x00000000
+#define DDRSS_PHY_427_DATA 0x00000000
+#define DDRSS_PHY_428_DATA 0x00000000
+#define DDRSS_PHY_429_DATA 0x00000000
+#define DDRSS_PHY_430_DATA 0x00000000
+#define DDRSS_PHY_431_DATA 0x00000000
+#define DDRSS_PHY_432_DATA 0x00000000
+#define DDRSS_PHY_433_DATA 0x00000000
+#define DDRSS_PHY_434_DATA 0x00000000
+#define DDRSS_PHY_435_DATA 0x00000000
+#define DDRSS_PHY_436_DATA 0x00000000
+#define DDRSS_PHY_437_DATA 0x00000000
+#define DDRSS_PHY_438_DATA 0x00000000
+#define DDRSS_PHY_439_DATA 0x00000000
+#define DDRSS_PHY_440_DATA 0x00000000
+#define DDRSS_PHY_441_DATA 0x00000000
+#define DDRSS_PHY_442_DATA 0x00000000
+#define DDRSS_PHY_443_DATA 0x00000000
+#define DDRSS_PHY_444_DATA 0x00000000
+#define DDRSS_PHY_445_DATA 0x00000000
+#define DDRSS_PHY_446_DATA 0x00000000
+#define DDRSS_PHY_447_DATA 0x00000000
+#define DDRSS_PHY_448_DATA 0x00000000
+#define DDRSS_PHY_449_DATA 0x00000000
+#define DDRSS_PHY_450_DATA 0x00000000
+#define DDRSS_PHY_451_DATA 0x00000000
+#define DDRSS_PHY_452_DATA 0x00000000
+#define DDRSS_PHY_453_DATA 0x00000000
+#define DDRSS_PHY_454_DATA 0x00000000
+#define DDRSS_PHY_455_DATA 0x00000000
+#define DDRSS_PHY_456_DATA 0x00000000
+#define DDRSS_PHY_457_DATA 0x00000000
+#define DDRSS_PHY_458_DATA 0x00000000
+#define DDRSS_PHY_459_DATA 0x00000000
+#define DDRSS_PHY_460_DATA 0x00000000
+#define DDRSS_PHY_461_DATA 0x00000000
+#define DDRSS_PHY_462_DATA 0x00000000
+#define DDRSS_PHY_463_DATA 0x00000000
+#define DDRSS_PHY_464_DATA 0x00000000
+#define DDRSS_PHY_465_DATA 0x00000000
+#define DDRSS_PHY_466_DATA 0x00000000
+#define DDRSS_PHY_467_DATA 0x00000000
+#define DDRSS_PHY_468_DATA 0x00000000
+#define DDRSS_PHY_469_DATA 0x00000000
+#define DDRSS_PHY_470_DATA 0x00000000
+#define DDRSS_PHY_471_DATA 0x00000000
+#define DDRSS_PHY_472_DATA 0x00000000
+#define DDRSS_PHY_473_DATA 0x00000000
+#define DDRSS_PHY_474_DATA 0x00000000
+#define DDRSS_PHY_475_DATA 0x00000000
+#define DDRSS_PHY_476_DATA 0x00000000
+#define DDRSS_PHY_477_DATA 0x00000000
+#define DDRSS_PHY_478_DATA 0x00000000
+#define DDRSS_PHY_479_DATA 0x00000000
+#define DDRSS_PHY_480_DATA 0x00000000
+#define DDRSS_PHY_481_DATA 0x00000000
+#define DDRSS_PHY_482_DATA 0x00000000
+#define DDRSS_PHY_483_DATA 0x00000000
+#define DDRSS_PHY_484_DATA 0x00000000
+#define DDRSS_PHY_485_DATA 0x00000000
+#define DDRSS_PHY_486_DATA 0x00000000
+#define DDRSS_PHY_487_DATA 0x00000000
+#define DDRSS_PHY_488_DATA 0x00000000
+#define DDRSS_PHY_489_DATA 0x00000000
+#define DDRSS_PHY_490_DATA 0x00000000
+#define DDRSS_PHY_491_DATA 0x00000000
+#define DDRSS_PHY_492_DATA 0x00000000
+#define DDRSS_PHY_493_DATA 0x00000000
+#define DDRSS_PHY_494_DATA 0x00000000
+#define DDRSS_PHY_495_DATA 0x00000000
+#define DDRSS_PHY_496_DATA 0x00000000
+#define DDRSS_PHY_497_DATA 0x00000000
+#define DDRSS_PHY_498_DATA 0x00000000
+#define DDRSS_PHY_499_DATA 0x00000000
+#define DDRSS_PHY_500_DATA 0x00000000
+#define DDRSS_PHY_501_DATA 0x00000000
+#define DDRSS_PHY_502_DATA 0x00000000
+#define DDRSS_PHY_503_DATA 0x00000000
+#define DDRSS_PHY_504_DATA 0x00000000
+#define DDRSS_PHY_505_DATA 0x00000000
+#define DDRSS_PHY_506_DATA 0x00000000
+#define DDRSS_PHY_507_DATA 0x00000000
+#define DDRSS_PHY_508_DATA 0x00000000
+#define DDRSS_PHY_509_DATA 0x00000000
+#define DDRSS_PHY_510_DATA 0x00000000
+#define DDRSS_PHY_511_DATA 0x00000000
+#define DDRSS_PHY_512_DATA 0x00000100
+#define DDRSS_PHY_513_DATA 0x00000000
+#define DDRSS_PHY_514_DATA 0x00000000
+#define DDRSS_PHY_515_DATA 0x00000000
+#define DDRSS_PHY_516_DATA 0x00000000
+#define DDRSS_PHY_517_DATA 0x00000100
+#define DDRSS_PHY_518_DATA 0x00000000
+#define DDRSS_PHY_519_DATA 0x00000000
+#define DDRSS_PHY_520_DATA 0x00000000
+#define DDRSS_PHY_521_DATA 0x00000000
+#define DDRSS_PHY_522_DATA 0x00000000
+#define DDRSS_PHY_523_DATA 0x00000000
+#define DDRSS_PHY_524_DATA 0x00000000
+#define DDRSS_PHY_525_DATA 0x00DCBA98
+#define DDRSS_PHY_526_DATA 0x00000000
+#define DDRSS_PHY_527_DATA 0x00000000
+#define DDRSS_PHY_528_DATA 0x00000000
+#define DDRSS_PHY_529_DATA 0x00000000
+#define DDRSS_PHY_530_DATA 0x00000000
+#define DDRSS_PHY_531_DATA 0x00000000
+#define DDRSS_PHY_532_DATA 0x00000000
+#define DDRSS_PHY_533_DATA 0x00000000
+#define DDRSS_PHY_534_DATA 0x00000000
+#define DDRSS_PHY_535_DATA 0x00000000
+#define DDRSS_PHY_536_DATA 0x00000000
+#define DDRSS_PHY_537_DATA 0x00000000
+#define DDRSS_PHY_538_DATA 0x00000000
+#define DDRSS_PHY_539_DATA 0x00000000
+#define DDRSS_PHY_540_DATA 0x0A418820
+#define DDRSS_PHY_541_DATA 0x103F0000
+#define DDRSS_PHY_542_DATA 0x000F0100
+#define DDRSS_PHY_543_DATA 0x0000000F
+#define DDRSS_PHY_544_DATA 0x020002CC
+#define DDRSS_PHY_545_DATA 0x00030000
+#define DDRSS_PHY_546_DATA 0x00000300
+#define DDRSS_PHY_547_DATA 0x00000300
+#define DDRSS_PHY_548_DATA 0x00000300
+#define DDRSS_PHY_549_DATA 0x00000300
+#define DDRSS_PHY_550_DATA 0x00000300
+#define DDRSS_PHY_551_DATA 0x42080010
+#define DDRSS_PHY_552_DATA 0x0000003E
+#define DDRSS_PHY_553_DATA 0x00000000
+#define DDRSS_PHY_554_DATA 0x00000000
+#define DDRSS_PHY_555_DATA 0x00000000
+#define DDRSS_PHY_556_DATA 0x00000000
+#define DDRSS_PHY_557_DATA 0x00000000
+#define DDRSS_PHY_558_DATA 0x00000000
+#define DDRSS_PHY_559_DATA 0x00000000
+#define DDRSS_PHY_560_DATA 0x00000000
+#define DDRSS_PHY_561_DATA 0x00000000
+#define DDRSS_PHY_562_DATA 0x00000000
+#define DDRSS_PHY_563_DATA 0x00000000
+#define DDRSS_PHY_564_DATA 0x00000000
+#define DDRSS_PHY_565_DATA 0x00000000
+#define DDRSS_PHY_566_DATA 0x00000000
+#define DDRSS_PHY_567_DATA 0x00000000
+#define DDRSS_PHY_568_DATA 0x00000000
+#define DDRSS_PHY_569_DATA 0x00000000
+#define DDRSS_PHY_570_DATA 0x00000000
+#define DDRSS_PHY_571_DATA 0x00000000
+#define DDRSS_PHY_572_DATA 0x00000000
+#define DDRSS_PHY_573_DATA 0x00000000
+#define DDRSS_PHY_574_DATA 0x00000000
+#define DDRSS_PHY_575_DATA 0x00000000
+#define DDRSS_PHY_576_DATA 0x00000000
+#define DDRSS_PHY_577_DATA 0x00000000
+#define DDRSS_PHY_578_DATA 0x00000000
+#define DDRSS_PHY_579_DATA 0x00000000
+#define DDRSS_PHY_580_DATA 0x00000000
+#define DDRSS_PHY_581_DATA 0x00000000
+#define DDRSS_PHY_582_DATA 0x00000000
+#define DDRSS_PHY_583_DATA 0x00000000
+#define DDRSS_PHY_584_DATA 0x00000000
+#define DDRSS_PHY_585_DATA 0x00000000
+#define DDRSS_PHY_586_DATA 0x00000000
+#define DDRSS_PHY_587_DATA 0x00000000
+#define DDRSS_PHY_588_DATA 0x00000000
+#define DDRSS_PHY_589_DATA 0x00000000
+#define DDRSS_PHY_590_DATA 0x00000000
+#define DDRSS_PHY_591_DATA 0x00000000
+#define DDRSS_PHY_592_DATA 0x00000000
+#define DDRSS_PHY_593_DATA 0x00000000
+#define DDRSS_PHY_594_DATA 0x00000000
+#define DDRSS_PHY_595_DATA 0x00000000
+#define DDRSS_PHY_596_DATA 0x00000000
+#define DDRSS_PHY_597_DATA 0x00000000
+#define DDRSS_PHY_598_DATA 0x00000000
+#define DDRSS_PHY_599_DATA 0x00000000
+#define DDRSS_PHY_600_DATA 0x00000000
+#define DDRSS_PHY_601_DATA 0x00000000
+#define DDRSS_PHY_602_DATA 0x00000000
+#define DDRSS_PHY_603_DATA 0x00000000
+#define DDRSS_PHY_604_DATA 0x00000000
+#define DDRSS_PHY_605_DATA 0x00000000
+#define DDRSS_PHY_606_DATA 0x00000000
+#define DDRSS_PHY_607_DATA 0x00000000
+#define DDRSS_PHY_608_DATA 0x00000000
+#define DDRSS_PHY_609_DATA 0x00000000
+#define DDRSS_PHY_610_DATA 0x00000000
+#define DDRSS_PHY_611_DATA 0x00000000
+#define DDRSS_PHY_612_DATA 0x00000000
+#define DDRSS_PHY_613_DATA 0x00000000
+#define DDRSS_PHY_614_DATA 0x00000000
+#define DDRSS_PHY_615_DATA 0x00000000
+#define DDRSS_PHY_616_DATA 0x00000000
+#define DDRSS_PHY_617_DATA 0x00000000
+#define DDRSS_PHY_618_DATA 0x00000000
+#define DDRSS_PHY_619_DATA 0x00000000
+#define DDRSS_PHY_620_DATA 0x00000000
+#define DDRSS_PHY_621_DATA 0x00000000
+#define DDRSS_PHY_622_DATA 0x00000000
+#define DDRSS_PHY_623_DATA 0x00000000
+#define DDRSS_PHY_624_DATA 0x00000000
+#define DDRSS_PHY_625_DATA 0x00000000
+#define DDRSS_PHY_626_DATA 0x00000000
+#define DDRSS_PHY_627_DATA 0x00000000
+#define DDRSS_PHY_628_DATA 0x00000000
+#define DDRSS_PHY_629_DATA 0x00000000
+#define DDRSS_PHY_630_DATA 0x00000000
+#define DDRSS_PHY_631_DATA 0x00000000
+#define DDRSS_PHY_632_DATA 0x00000000
+#define DDRSS_PHY_633_DATA 0x00000000
+#define DDRSS_PHY_634_DATA 0x00000000
+#define DDRSS_PHY_635_DATA 0x00000000
+#define DDRSS_PHY_636_DATA 0x00000000
+#define DDRSS_PHY_637_DATA 0x00000000
+#define DDRSS_PHY_638_DATA 0x00000000
+#define DDRSS_PHY_639_DATA 0x00000000
+#define DDRSS_PHY_640_DATA 0x00000000
+#define DDRSS_PHY_641_DATA 0x00000000
+#define DDRSS_PHY_642_DATA 0x00000000
+#define DDRSS_PHY_643_DATA 0x00000000
+#define DDRSS_PHY_644_DATA 0x00000000
+#define DDRSS_PHY_645_DATA 0x00000000
+#define DDRSS_PHY_646_DATA 0x00000000
+#define DDRSS_PHY_647_DATA 0x00000000
+#define DDRSS_PHY_648_DATA 0x00000000
+#define DDRSS_PHY_649_DATA 0x00000000
+#define DDRSS_PHY_650_DATA 0x00000000
+#define DDRSS_PHY_651_DATA 0x00000000
+#define DDRSS_PHY_652_DATA 0x00000000
+#define DDRSS_PHY_653_DATA 0x00000000
+#define DDRSS_PHY_654_DATA 0x00000000
+#define DDRSS_PHY_655_DATA 0x00000000
+#define DDRSS_PHY_656_DATA 0x00000000
+#define DDRSS_PHY_657_DATA 0x00000000
+#define DDRSS_PHY_658_DATA 0x00000000
+#define DDRSS_PHY_659_DATA 0x00000000
+#define DDRSS_PHY_660_DATA 0x00000000
+#define DDRSS_PHY_661_DATA 0x00000000
+#define DDRSS_PHY_662_DATA 0x00000000
+#define DDRSS_PHY_663_DATA 0x00000000
+#define DDRSS_PHY_664_DATA 0x00000000
+#define DDRSS_PHY_665_DATA 0x00000000
+#define DDRSS_PHY_666_DATA 0x00000000
+#define DDRSS_PHY_667_DATA 0x00000000
+#define DDRSS_PHY_668_DATA 0x00000000
+#define DDRSS_PHY_669_DATA 0x00000000
+#define DDRSS_PHY_670_DATA 0x00000000
+#define DDRSS_PHY_671_DATA 0x00000000
+#define DDRSS_PHY_672_DATA 0x00000000
+#define DDRSS_PHY_673_DATA 0x00000000
+#define DDRSS_PHY_674_DATA 0x00000000
+#define DDRSS_PHY_675_DATA 0x00000000
+#define DDRSS_PHY_676_DATA 0x00000000
+#define DDRSS_PHY_677_DATA 0x00000000
+#define DDRSS_PHY_678_DATA 0x00000000
+#define DDRSS_PHY_679_DATA 0x00000000
+#define DDRSS_PHY_680_DATA 0x00000000
+#define DDRSS_PHY_681_DATA 0x00000000
+#define DDRSS_PHY_682_DATA 0x00000000
+#define DDRSS_PHY_683_DATA 0x00000000
+#define DDRSS_PHY_684_DATA 0x00000000
+#define DDRSS_PHY_685_DATA 0x00000000
+#define DDRSS_PHY_686_DATA 0x00000000
+#define DDRSS_PHY_687_DATA 0x00000000
+#define DDRSS_PHY_688_DATA 0x00000000
+#define DDRSS_PHY_689_DATA 0x00000000
+#define DDRSS_PHY_690_DATA 0x00000000
+#define DDRSS_PHY_691_DATA 0x00000000
+#define DDRSS_PHY_692_DATA 0x00000000
+#define DDRSS_PHY_693_DATA 0x00000000
+#define DDRSS_PHY_694_DATA 0x00000000
+#define DDRSS_PHY_695_DATA 0x00000000
+#define DDRSS_PHY_696_DATA 0x00000000
+#define DDRSS_PHY_697_DATA 0x00000000
+#define DDRSS_PHY_698_DATA 0x00000000
+#define DDRSS_PHY_699_DATA 0x00000000
+#define DDRSS_PHY_700_DATA 0x00000000
+#define DDRSS_PHY_701_DATA 0x00000000
+#define DDRSS_PHY_702_DATA 0x00000000
+#define DDRSS_PHY_703_DATA 0x00000000
+#define DDRSS_PHY_704_DATA 0x00000000
+#define DDRSS_PHY_705_DATA 0x00000000
+#define DDRSS_PHY_706_DATA 0x00000000
+#define DDRSS_PHY_707_DATA 0x00000000
+#define DDRSS_PHY_708_DATA 0x00000000
+#define DDRSS_PHY_709_DATA 0x00000000
+#define DDRSS_PHY_710_DATA 0x00000000
+#define DDRSS_PHY_711_DATA 0x00000000
+#define DDRSS_PHY_712_DATA 0x00000000
+#define DDRSS_PHY_713_DATA 0x00000000
+#define DDRSS_PHY_714_DATA 0x00000000
+#define DDRSS_PHY_715_DATA 0x00000000
+#define DDRSS_PHY_716_DATA 0x00000000
+#define DDRSS_PHY_717_DATA 0x00000000
+#define DDRSS_PHY_718_DATA 0x00000000
+#define DDRSS_PHY_719_DATA 0x00000000
+#define DDRSS_PHY_720_DATA 0x00000000
+#define DDRSS_PHY_721_DATA 0x00000000
+#define DDRSS_PHY_722_DATA 0x00000000
+#define DDRSS_PHY_723_DATA 0x00000000
+#define DDRSS_PHY_724_DATA 0x00000000
+#define DDRSS_PHY_725_DATA 0x00000000
+#define DDRSS_PHY_726_DATA 0x00000000
+#define DDRSS_PHY_727_DATA 0x00000000
+#define DDRSS_PHY_728_DATA 0x00000000
+#define DDRSS_PHY_729_DATA 0x00000000
+#define DDRSS_PHY_730_DATA 0x00000000
+#define DDRSS_PHY_731_DATA 0x00000000
+#define DDRSS_PHY_732_DATA 0x00000000
+#define DDRSS_PHY_733_DATA 0x00000000
+#define DDRSS_PHY_734_DATA 0x00000000
+#define DDRSS_PHY_735_DATA 0x00000000
+#define DDRSS_PHY_736_DATA 0x00000000
+#define DDRSS_PHY_737_DATA 0x00000000
+#define DDRSS_PHY_738_DATA 0x00000000
+#define DDRSS_PHY_739_DATA 0x00000000
+#define DDRSS_PHY_740_DATA 0x00000000
+#define DDRSS_PHY_741_DATA 0x00000000
+#define DDRSS_PHY_742_DATA 0x00000000
+#define DDRSS_PHY_743_DATA 0x00000000
+#define DDRSS_PHY_744_DATA 0x00000000
+#define DDRSS_PHY_745_DATA 0x00000000
+#define DDRSS_PHY_746_DATA 0x00000000
+#define DDRSS_PHY_747_DATA 0x00000000
+#define DDRSS_PHY_748_DATA 0x00000000
+#define DDRSS_PHY_749_DATA 0x00000000
+#define DDRSS_PHY_750_DATA 0x00000000
+#define DDRSS_PHY_751_DATA 0x00000000
+#define DDRSS_PHY_752_DATA 0x00000000
+#define DDRSS_PHY_753_DATA 0x00000000
+#define DDRSS_PHY_754_DATA 0x00000000
+#define DDRSS_PHY_755_DATA 0x00000000
+#define DDRSS_PHY_756_DATA 0x00000000
+#define DDRSS_PHY_757_DATA 0x00000000
+#define DDRSS_PHY_758_DATA 0x00000000
+#define DDRSS_PHY_759_DATA 0x00000000
+#define DDRSS_PHY_760_DATA 0x00000000
+#define DDRSS_PHY_761_DATA 0x00000000
+#define DDRSS_PHY_762_DATA 0x00000000
+#define DDRSS_PHY_763_DATA 0x00000000
+#define DDRSS_PHY_764_DATA 0x00000000
+#define DDRSS_PHY_765_DATA 0x00000000
+#define DDRSS_PHY_766_DATA 0x00000000
+#define DDRSS_PHY_767_DATA 0x00000000
+#define DDRSS_PHY_768_DATA 0x00000100
+#define DDRSS_PHY_769_DATA 0x00000000
+#define DDRSS_PHY_770_DATA 0x00000000
+#define DDRSS_PHY_771_DATA 0x00000000
+#define DDRSS_PHY_772_DATA 0x00000000
+#define DDRSS_PHY_773_DATA 0x00000100
+#define DDRSS_PHY_774_DATA 0x00000000
+#define DDRSS_PHY_775_DATA 0x00000000
+#define DDRSS_PHY_776_DATA 0x00000000
+#define DDRSS_PHY_777_DATA 0x00000000
+#define DDRSS_PHY_778_DATA 0x00000000
+#define DDRSS_PHY_779_DATA 0x00000000
+#define DDRSS_PHY_780_DATA 0x00000000
+#define DDRSS_PHY_781_DATA 0x00DCBA98
+#define DDRSS_PHY_782_DATA 0x00000000
+#define DDRSS_PHY_783_DATA 0x00000000
+#define DDRSS_PHY_784_DATA 0x00000000
+#define DDRSS_PHY_785_DATA 0x00000000
+#define DDRSS_PHY_786_DATA 0x00000000
+#define DDRSS_PHY_787_DATA 0x00000000
+#define DDRSS_PHY_788_DATA 0x00000000
+#define DDRSS_PHY_789_DATA 0x00000000
+#define DDRSS_PHY_790_DATA 0x00000000
+#define DDRSS_PHY_791_DATA 0x00000000
+#define DDRSS_PHY_792_DATA 0x00000000
+#define DDRSS_PHY_793_DATA 0x00000000
+#define DDRSS_PHY_794_DATA 0x00000000
+#define DDRSS_PHY_795_DATA 0x00000000
+#define DDRSS_PHY_796_DATA 0x16A4A0E6
+#define DDRSS_PHY_797_DATA 0x103F0000
+#define DDRSS_PHY_798_DATA 0x000F0000
+#define DDRSS_PHY_799_DATA 0x0000000F
+#define DDRSS_PHY_800_DATA 0x020002CC
+#define DDRSS_PHY_801_DATA 0x00030000
+#define DDRSS_PHY_802_DATA 0x00000300
+#define DDRSS_PHY_803_DATA 0x00000300
+#define DDRSS_PHY_804_DATA 0x00000300
+#define DDRSS_PHY_805_DATA 0x00000300
+#define DDRSS_PHY_806_DATA 0x00000300
+#define DDRSS_PHY_807_DATA 0x42080010
+#define DDRSS_PHY_808_DATA 0x0000003E
+#define DDRSS_PHY_809_DATA 0x00000000
+#define DDRSS_PHY_810_DATA 0x00000000
+#define DDRSS_PHY_811_DATA 0x00000000
+#define DDRSS_PHY_812_DATA 0x00000000
+#define DDRSS_PHY_813_DATA 0x00000000
+#define DDRSS_PHY_814_DATA 0x00000000
+#define DDRSS_PHY_815_DATA 0x00000000
+#define DDRSS_PHY_816_DATA 0x00000000
+#define DDRSS_PHY_817_DATA 0x00000000
+#define DDRSS_PHY_818_DATA 0x00000000
+#define DDRSS_PHY_819_DATA 0x00000000
+#define DDRSS_PHY_820_DATA 0x00000000
+#define DDRSS_PHY_821_DATA 0x00000000
+#define DDRSS_PHY_822_DATA 0x00000000
+#define DDRSS_PHY_823_DATA 0x00000000
+#define DDRSS_PHY_824_DATA 0x00000000
+#define DDRSS_PHY_825_DATA 0x00000000
+#define DDRSS_PHY_826_DATA 0x00000000
+#define DDRSS_PHY_827_DATA 0x00000000
+#define DDRSS_PHY_828_DATA 0x00000000
+#define DDRSS_PHY_829_DATA 0x00000000
+#define DDRSS_PHY_830_DATA 0x00000000
+#define DDRSS_PHY_831_DATA 0x00000000
+#define DDRSS_PHY_832_DATA 0x00000000
+#define DDRSS_PHY_833_DATA 0x00000000
+#define DDRSS_PHY_834_DATA 0x00000000
+#define DDRSS_PHY_835_DATA 0x00000000
+#define DDRSS_PHY_836_DATA 0x00000000
+#define DDRSS_PHY_837_DATA 0x00000000
+#define DDRSS_PHY_838_DATA 0x00000000
+#define DDRSS_PHY_839_DATA 0x00000000
+#define DDRSS_PHY_840_DATA 0x00000000
+#define DDRSS_PHY_841_DATA 0x00000000
+#define DDRSS_PHY_842_DATA 0x00000000
+#define DDRSS_PHY_843_DATA 0x00000000
+#define DDRSS_PHY_844_DATA 0x00000000
+#define DDRSS_PHY_845_DATA 0x00000000
+#define DDRSS_PHY_846_DATA 0x00000000
+#define DDRSS_PHY_847_DATA 0x00000000
+#define DDRSS_PHY_848_DATA 0x00000000
+#define DDRSS_PHY_849_DATA 0x00000000
+#define DDRSS_PHY_850_DATA 0x00000000
+#define DDRSS_PHY_851_DATA 0x00000000
+#define DDRSS_PHY_852_DATA 0x00000000
+#define DDRSS_PHY_853_DATA 0x00000000
+#define DDRSS_PHY_854_DATA 0x00000000
+#define DDRSS_PHY_855_DATA 0x00000000
+#define DDRSS_PHY_856_DATA 0x00000000
+#define DDRSS_PHY_857_DATA 0x00000000
+#define DDRSS_PHY_858_DATA 0x00000000
+#define DDRSS_PHY_859_DATA 0x00000000
+#define DDRSS_PHY_860_DATA 0x00000000
+#define DDRSS_PHY_861_DATA 0x00000000
+#define DDRSS_PHY_862_DATA 0x00000000
+#define DDRSS_PHY_863_DATA 0x00000000
+#define DDRSS_PHY_864_DATA 0x00000000
+#define DDRSS_PHY_865_DATA 0x00000000
+#define DDRSS_PHY_866_DATA 0x00000000
+#define DDRSS_PHY_867_DATA 0x00000000
+#define DDRSS_PHY_868_DATA 0x00000000
+#define DDRSS_PHY_869_DATA 0x00000000
+#define DDRSS_PHY_870_DATA 0x00000000
+#define DDRSS_PHY_871_DATA 0x00000000
+#define DDRSS_PHY_872_DATA 0x00000000
+#define DDRSS_PHY_873_DATA 0x00000000
+#define DDRSS_PHY_874_DATA 0x00000000
+#define DDRSS_PHY_875_DATA 0x00000000
+#define DDRSS_PHY_876_DATA 0x00000000
+#define DDRSS_PHY_877_DATA 0x00000000
+#define DDRSS_PHY_878_DATA 0x00000000
+#define DDRSS_PHY_879_DATA 0x00000000
+#define DDRSS_PHY_880_DATA 0x00000000
+#define DDRSS_PHY_881_DATA 0x00000000
+#define DDRSS_PHY_882_DATA 0x00000000
+#define DDRSS_PHY_883_DATA 0x00000000
+#define DDRSS_PHY_884_DATA 0x00000000
+#define DDRSS_PHY_885_DATA 0x00000000
+#define DDRSS_PHY_886_DATA 0x00000000
+#define DDRSS_PHY_887_DATA 0x00000000
+#define DDRSS_PHY_888_DATA 0x00000000
+#define DDRSS_PHY_889_DATA 0x00000000
+#define DDRSS_PHY_890_DATA 0x00000000
+#define DDRSS_PHY_891_DATA 0x00000000
+#define DDRSS_PHY_892_DATA 0x00000000
+#define DDRSS_PHY_893_DATA 0x00000000
+#define DDRSS_PHY_894_DATA 0x00000000
+#define DDRSS_PHY_895_DATA 0x00000000
+#define DDRSS_PHY_896_DATA 0x00000000
+#define DDRSS_PHY_897_DATA 0x00000000
+#define DDRSS_PHY_898_DATA 0x00000000
+#define DDRSS_PHY_899_DATA 0x00000000
+#define DDRSS_PHY_900_DATA 0x00000000
+#define DDRSS_PHY_901_DATA 0x00000000
+#define DDRSS_PHY_902_DATA 0x00000000
+#define DDRSS_PHY_903_DATA 0x00000000
+#define DDRSS_PHY_904_DATA 0x00000000
+#define DDRSS_PHY_905_DATA 0x00000000
+#define DDRSS_PHY_906_DATA 0x00000000
+#define DDRSS_PHY_907_DATA 0x00000000
+#define DDRSS_PHY_908_DATA 0x00000000
+#define DDRSS_PHY_909_DATA 0x00000000
+#define DDRSS_PHY_910_DATA 0x00000000
+#define DDRSS_PHY_911_DATA 0x00000000
+#define DDRSS_PHY_912_DATA 0x00000000
+#define DDRSS_PHY_913_DATA 0x00000000
+#define DDRSS_PHY_914_DATA 0x00000000
+#define DDRSS_PHY_915_DATA 0x00000000
+#define DDRSS_PHY_916_DATA 0x00000000
+#define DDRSS_PHY_917_DATA 0x00000000
+#define DDRSS_PHY_918_DATA 0x00000000
+#define DDRSS_PHY_919_DATA 0x00000000
+#define DDRSS_PHY_920_DATA 0x00000000
+#define DDRSS_PHY_921_DATA 0x00000000
+#define DDRSS_PHY_922_DATA 0x00000000
+#define DDRSS_PHY_923_DATA 0x00000000
+#define DDRSS_PHY_924_DATA 0x00000000
+#define DDRSS_PHY_925_DATA 0x00000000
+#define DDRSS_PHY_926_DATA 0x00000000
+#define DDRSS_PHY_927_DATA 0x00000000
+#define DDRSS_PHY_928_DATA 0x00000000
+#define DDRSS_PHY_929_DATA 0x00000000
+#define DDRSS_PHY_930_DATA 0x00000000
+#define DDRSS_PHY_931_DATA 0x00000000
+#define DDRSS_PHY_932_DATA 0x00000000
+#define DDRSS_PHY_933_DATA 0x00000000
+#define DDRSS_PHY_934_DATA 0x00000000
+#define DDRSS_PHY_935_DATA 0x00000000
+#define DDRSS_PHY_936_DATA 0x00000000
+#define DDRSS_PHY_937_DATA 0x00000000
+#define DDRSS_PHY_938_DATA 0x00000000
+#define DDRSS_PHY_939_DATA 0x00000000
+#define DDRSS_PHY_940_DATA 0x00000000
+#define DDRSS_PHY_941_DATA 0x00000000
+#define DDRSS_PHY_942_DATA 0x00000000
+#define DDRSS_PHY_943_DATA 0x00000000
+#define DDRSS_PHY_944_DATA 0x00000000
+#define DDRSS_PHY_945_DATA 0x00000000
+#define DDRSS_PHY_946_DATA 0x00000000
+#define DDRSS_PHY_947_DATA 0x00000000
+#define DDRSS_PHY_948_DATA 0x00000000
+#define DDRSS_PHY_949_DATA 0x00000000
+#define DDRSS_PHY_950_DATA 0x00000000
+#define DDRSS_PHY_951_DATA 0x00000000
+#define DDRSS_PHY_952_DATA 0x00000000
+#define DDRSS_PHY_953_DATA 0x00000000
+#define DDRSS_PHY_954_DATA 0x00000000
+#define DDRSS_PHY_955_DATA 0x00000000
+#define DDRSS_PHY_956_DATA 0x00000000
+#define DDRSS_PHY_957_DATA 0x00000000
+#define DDRSS_PHY_958_DATA 0x00000000
+#define DDRSS_PHY_959_DATA 0x00000000
+#define DDRSS_PHY_960_DATA 0x00000000
+#define DDRSS_PHY_961_DATA 0x00000000
+#define DDRSS_PHY_962_DATA 0x00000000
+#define DDRSS_PHY_963_DATA 0x00000000
+#define DDRSS_PHY_964_DATA 0x00000000
+#define DDRSS_PHY_965_DATA 0x00000000
+#define DDRSS_PHY_966_DATA 0x00000000
+#define DDRSS_PHY_967_DATA 0x00000000
+#define DDRSS_PHY_968_DATA 0x00000000
+#define DDRSS_PHY_969_DATA 0x00000000
+#define DDRSS_PHY_970_DATA 0x00000000
+#define DDRSS_PHY_971_DATA 0x00000000
+#define DDRSS_PHY_972_DATA 0x00000000
+#define DDRSS_PHY_973_DATA 0x00000000
+#define DDRSS_PHY_974_DATA 0x00000000
+#define DDRSS_PHY_975_DATA 0x00000000
+#define DDRSS_PHY_976_DATA 0x00000000
+#define DDRSS_PHY_977_DATA 0x00000000
+#define DDRSS_PHY_978_DATA 0x00000000
+#define DDRSS_PHY_979_DATA 0x00000000
+#define DDRSS_PHY_980_DATA 0x00000000
+#define DDRSS_PHY_981_DATA 0x00000000
+#define DDRSS_PHY_982_DATA 0x00000000
+#define DDRSS_PHY_983_DATA 0x00000000
+#define DDRSS_PHY_984_DATA 0x00000000
+#define DDRSS_PHY_985_DATA 0x00000000
+#define DDRSS_PHY_986_DATA 0x00000000
+#define DDRSS_PHY_987_DATA 0x00000000
+#define DDRSS_PHY_988_DATA 0x00000000
+#define DDRSS_PHY_989_DATA 0x00000000
+#define DDRSS_PHY_990_DATA 0x00000000
+#define DDRSS_PHY_991_DATA 0x00000000
+#define DDRSS_PHY_992_DATA 0x00000000
+#define DDRSS_PHY_993_DATA 0x00000000
+#define DDRSS_PHY_994_DATA 0x00000000
+#define DDRSS_PHY_995_DATA 0x00000000
+#define DDRSS_PHY_996_DATA 0x00000000
+#define DDRSS_PHY_997_DATA 0x00000000
+#define DDRSS_PHY_998_DATA 0x00000000
+#define DDRSS_PHY_999_DATA 0x00000000
+#define DDRSS_PHY_1000_DATA 0x00000000
+#define DDRSS_PHY_1001_DATA 0x00000000
+#define DDRSS_PHY_1002_DATA 0x00000000
+#define DDRSS_PHY_1003_DATA 0x00000000
+#define DDRSS_PHY_1004_DATA 0x00000000
+#define DDRSS_PHY_1005_DATA 0x00000000
+#define DDRSS_PHY_1006_DATA 0x00000000
+#define DDRSS_PHY_1007_DATA 0x00000000
+#define DDRSS_PHY_1008_DATA 0x00000000
+#define DDRSS_PHY_1009_DATA 0x00000000
+#define DDRSS_PHY_1010_DATA 0x00000000
+#define DDRSS_PHY_1011_DATA 0x00000000
+#define DDRSS_PHY_1012_DATA 0x00000000
+#define DDRSS_PHY_1013_DATA 0x00000000
+#define DDRSS_PHY_1014_DATA 0x00000000
+#define DDRSS_PHY_1015_DATA 0x00000000
+#define DDRSS_PHY_1016_DATA 0x00000000
+#define DDRSS_PHY_1017_DATA 0x00000000
+#define DDRSS_PHY_1018_DATA 0x00000000
+#define DDRSS_PHY_1019_DATA 0x00000000
+#define DDRSS_PHY_1020_DATA 0x00000000
+#define DDRSS_PHY_1021_DATA 0x00000000
+#define DDRSS_PHY_1022_DATA 0x00000000
+#define DDRSS_PHY_1023_DATA 0x00000000
+#define DDRSS_PHY_1024_DATA 0x00000100
+#define DDRSS_PHY_1025_DATA 0x00000000
+#define DDRSS_PHY_1026_DATA 0x00000000
+#define DDRSS_PHY_1027_DATA 0x00000000
+#define DDRSS_PHY_1028_DATA 0x00000000
+#define DDRSS_PHY_1029_DATA 0x00000100
+#define DDRSS_PHY_1030_DATA 0x00000000
+#define DDRSS_PHY_1031_DATA 0x00000000
+#define DDRSS_PHY_1032_DATA 0x00000000
+#define DDRSS_PHY_1033_DATA 0x00000000
+#define DDRSS_PHY_1034_DATA 0x00000000
+#define DDRSS_PHY_1035_DATA 0x00000000
+#define DDRSS_PHY_1036_DATA 0x00000000
+#define DDRSS_PHY_1037_DATA 0x00DCBA98
+#define DDRSS_PHY_1038_DATA 0x00000000
+#define DDRSS_PHY_1039_DATA 0x00000000
+#define DDRSS_PHY_1040_DATA 0x00000000
+#define DDRSS_PHY_1041_DATA 0x00000000
+#define DDRSS_PHY_1042_DATA 0x00000000
+#define DDRSS_PHY_1043_DATA 0x00000000
+#define DDRSS_PHY_1044_DATA 0x00000000
+#define DDRSS_PHY_1045_DATA 0x00000000
+#define DDRSS_PHY_1046_DATA 0x00000000
+#define DDRSS_PHY_1047_DATA 0x00000000
+#define DDRSS_PHY_1048_DATA 0x00000000
+#define DDRSS_PHY_1049_DATA 0x00000000
+#define DDRSS_PHY_1050_DATA 0x00000000
+#define DDRSS_PHY_1051_DATA 0x00000000
+#define DDRSS_PHY_1052_DATA 0x2307B9AC
+#define DDRSS_PHY_1053_DATA 0x10030000
+#define DDRSS_PHY_1054_DATA 0x000F0000
+#define DDRSS_PHY_1055_DATA 0x0000000F
+#define DDRSS_PHY_1056_DATA 0x020002CC
+#define DDRSS_PHY_1057_DATA 0x00030000
+#define DDRSS_PHY_1058_DATA 0x00000300
+#define DDRSS_PHY_1059_DATA 0x00000300
+#define DDRSS_PHY_1060_DATA 0x00000300
+#define DDRSS_PHY_1061_DATA 0x00000300
+#define DDRSS_PHY_1062_DATA 0x00000300
+#define DDRSS_PHY_1063_DATA 0x42080010
+#define DDRSS_PHY_1064_DATA 0x0000003E
+#define DDRSS_PHY_1065_DATA 0x00000000
+#define DDRSS_PHY_1066_DATA 0x00000000
+#define DDRSS_PHY_1067_DATA 0x00000000
+#define DDRSS_PHY_1068_DATA 0x00000000
+#define DDRSS_PHY_1069_DATA 0x00000000
+#define DDRSS_PHY_1070_DATA 0x00000000
+#define DDRSS_PHY_1071_DATA 0x00000000
+#define DDRSS_PHY_1072_DATA 0x00000000
+#define DDRSS_PHY_1073_DATA 0x00000000
+#define DDRSS_PHY_1074_DATA 0x00000000
+#define DDRSS_PHY_1075_DATA 0x00000000
+#define DDRSS_PHY_1076_DATA 0x00000000
+#define DDRSS_PHY_1077_DATA 0x00000000
+#define DDRSS_PHY_1078_DATA 0x00000000
+#define DDRSS_PHY_1079_DATA 0x00000000
+#define DDRSS_PHY_1080_DATA 0x00000000
+#define DDRSS_PHY_1081_DATA 0x00000000
+#define DDRSS_PHY_1082_DATA 0x00000000
+#define DDRSS_PHY_1083_DATA 0x00000000
+#define DDRSS_PHY_1084_DATA 0x00000000
+#define DDRSS_PHY_1085_DATA 0x00000000
+#define DDRSS_PHY_1086_DATA 0x00000000
+#define DDRSS_PHY_1087_DATA 0x00000000
+#define DDRSS_PHY_1088_DATA 0x00000000
+#define DDRSS_PHY_1089_DATA 0x00000000
+#define DDRSS_PHY_1090_DATA 0x00000000
+#define DDRSS_PHY_1091_DATA 0x00000000
+#define DDRSS_PHY_1092_DATA 0x00000000
+#define DDRSS_PHY_1093_DATA 0x00000000
+#define DDRSS_PHY_1094_DATA 0x00000000
+#define DDRSS_PHY_1095_DATA 0x00000000
+#define DDRSS_PHY_1096_DATA 0x00000000
+#define DDRSS_PHY_1097_DATA 0x00000000
+#define DDRSS_PHY_1098_DATA 0x00000000
+#define DDRSS_PHY_1099_DATA 0x00000000
+#define DDRSS_PHY_1100_DATA 0x00000000
+#define DDRSS_PHY_1101_DATA 0x00000000
+#define DDRSS_PHY_1102_DATA 0x00000000
+#define DDRSS_PHY_1103_DATA 0x00000000
+#define DDRSS_PHY_1104_DATA 0x00000000
+#define DDRSS_PHY_1105_DATA 0x00000000
+#define DDRSS_PHY_1106_DATA 0x00000000
+#define DDRSS_PHY_1107_DATA 0x00000000
+#define DDRSS_PHY_1108_DATA 0x00000000
+#define DDRSS_PHY_1109_DATA 0x00000000
+#define DDRSS_PHY_1110_DATA 0x00000000
+#define DDRSS_PHY_1111_DATA 0x00000000
+#define DDRSS_PHY_1112_DATA 0x00000000
+#define DDRSS_PHY_1113_DATA 0x00000000
+#define DDRSS_PHY_1114_DATA 0x00000000
+#define DDRSS_PHY_1115_DATA 0x00000000
+#define DDRSS_PHY_1116_DATA 0x00000000
+#define DDRSS_PHY_1117_DATA 0x00000000
+#define DDRSS_PHY_1118_DATA 0x00000000
+#define DDRSS_PHY_1119_DATA 0x00000000
+#define DDRSS_PHY_1120_DATA 0x00000000
+#define DDRSS_PHY_1121_DATA 0x00000000
+#define DDRSS_PHY_1122_DATA 0x00000000
+#define DDRSS_PHY_1123_DATA 0x00000000
+#define DDRSS_PHY_1124_DATA 0x00000000
+#define DDRSS_PHY_1125_DATA 0x00000000
+#define DDRSS_PHY_1126_DATA 0x00000000
+#define DDRSS_PHY_1127_DATA 0x00000000
+#define DDRSS_PHY_1128_DATA 0x00000000
+#define DDRSS_PHY_1129_DATA 0x00000000
+#define DDRSS_PHY_1130_DATA 0x00000000
+#define DDRSS_PHY_1131_DATA 0x00000000
+#define DDRSS_PHY_1132_DATA 0x00000000
+#define DDRSS_PHY_1133_DATA 0x00000000
+#define DDRSS_PHY_1134_DATA 0x00000000
+#define DDRSS_PHY_1135_DATA 0x00000000
+#define DDRSS_PHY_1136_DATA 0x00000000
+#define DDRSS_PHY_1137_DATA 0x00000000
+#define DDRSS_PHY_1138_DATA 0x00000000
+#define DDRSS_PHY_1139_DATA 0x00000000
+#define DDRSS_PHY_1140_DATA 0x00000000
+#define DDRSS_PHY_1141_DATA 0x00000000
+#define DDRSS_PHY_1142_DATA 0x00000000
+#define DDRSS_PHY_1143_DATA 0x00000000
+#define DDRSS_PHY_1144_DATA 0x00000000
+#define DDRSS_PHY_1145_DATA 0x00000000
+#define DDRSS_PHY_1146_DATA 0x00000000
+#define DDRSS_PHY_1147_DATA 0x00000000
+#define DDRSS_PHY_1148_DATA 0x00000000
+#define DDRSS_PHY_1149_DATA 0x00000000
+#define DDRSS_PHY_1150_DATA 0x00000000
+#define DDRSS_PHY_1151_DATA 0x00000000
+#define DDRSS_PHY_1152_DATA 0x00000000
+#define DDRSS_PHY_1153_DATA 0x00000000
+#define DDRSS_PHY_1154_DATA 0x00000000
+#define DDRSS_PHY_1155_DATA 0x00000000
+#define DDRSS_PHY_1156_DATA 0x00000000
+#define DDRSS_PHY_1157_DATA 0x00000000
+#define DDRSS_PHY_1158_DATA 0x00000000
+#define DDRSS_PHY_1159_DATA 0x00000000
+#define DDRSS_PHY_1160_DATA 0x00000000
+#define DDRSS_PHY_1161_DATA 0x00000000
+#define DDRSS_PHY_1162_DATA 0x00000000
+#define DDRSS_PHY_1163_DATA 0x00000000
+#define DDRSS_PHY_1164_DATA 0x00000000
+#define DDRSS_PHY_1165_DATA 0x00000000
+#define DDRSS_PHY_1166_DATA 0x00000000
+#define DDRSS_PHY_1167_DATA 0x00000000
+#define DDRSS_PHY_1168_DATA 0x00000000
+#define DDRSS_PHY_1169_DATA 0x00000000
+#define DDRSS_PHY_1170_DATA 0x00000000
+#define DDRSS_PHY_1171_DATA 0x00000000
+#define DDRSS_PHY_1172_DATA 0x00000000
+#define DDRSS_PHY_1173_DATA 0x00000000
+#define DDRSS_PHY_1174_DATA 0x00000000
+#define DDRSS_PHY_1175_DATA 0x00000000
+#define DDRSS_PHY_1176_DATA 0x00000000
+#define DDRSS_PHY_1177_DATA 0x00000000
+#define DDRSS_PHY_1178_DATA 0x00000000
+#define DDRSS_PHY_1179_DATA 0x00000000
+#define DDRSS_PHY_1180_DATA 0x00000000
+#define DDRSS_PHY_1181_DATA 0x00000000
+#define DDRSS_PHY_1182_DATA 0x00000000
+#define DDRSS_PHY_1183_DATA 0x00000000
+#define DDRSS_PHY_1184_DATA 0x00000000
+#define DDRSS_PHY_1185_DATA 0x00000000
+#define DDRSS_PHY_1186_DATA 0x00000000
+#define DDRSS_PHY_1187_DATA 0x00000000
+#define DDRSS_PHY_1188_DATA 0x00000000
+#define DDRSS_PHY_1189_DATA 0x00000000
+#define DDRSS_PHY_1190_DATA 0x00000000
+#define DDRSS_PHY_1191_DATA 0x00000000
+#define DDRSS_PHY_1192_DATA 0x00000000
+#define DDRSS_PHY_1193_DATA 0x00000000
+#define DDRSS_PHY_1194_DATA 0x00000000
+#define DDRSS_PHY_1195_DATA 0x00000000
+#define DDRSS_PHY_1196_DATA 0x00000000
+#define DDRSS_PHY_1197_DATA 0x00000000
+#define DDRSS_PHY_1198_DATA 0x00000000
+#define DDRSS_PHY_1199_DATA 0x00000000
+#define DDRSS_PHY_1200_DATA 0x00000000
+#define DDRSS_PHY_1201_DATA 0x00000000
+#define DDRSS_PHY_1202_DATA 0x00000000
+#define DDRSS_PHY_1203_DATA 0x00000000
+#define DDRSS_PHY_1204_DATA 0x00000000
+#define DDRSS_PHY_1205_DATA 0x00000000
+#define DDRSS_PHY_1206_DATA 0x00000000
+#define DDRSS_PHY_1207_DATA 0x00000000
+#define DDRSS_PHY_1208_DATA 0x00000000
+#define DDRSS_PHY_1209_DATA 0x00000000
+#define DDRSS_PHY_1210_DATA 0x00000000
+#define DDRSS_PHY_1211_DATA 0x00000000
+#define DDRSS_PHY_1212_DATA 0x00000000
+#define DDRSS_PHY_1213_DATA 0x00000000
+#define DDRSS_PHY_1214_DATA 0x00000000
+#define DDRSS_PHY_1215_DATA 0x00000000
+#define DDRSS_PHY_1216_DATA 0x00000000
+#define DDRSS_PHY_1217_DATA 0x00000000
+#define DDRSS_PHY_1218_DATA 0x00000000
+#define DDRSS_PHY_1219_DATA 0x00000000
+#define DDRSS_PHY_1220_DATA 0x00000000
+#define DDRSS_PHY_1221_DATA 0x00000000
+#define DDRSS_PHY_1222_DATA 0x00000000
+#define DDRSS_PHY_1223_DATA 0x00000000
+#define DDRSS_PHY_1224_DATA 0x00000000
+#define DDRSS_PHY_1225_DATA 0x00000000
+#define DDRSS_PHY_1226_DATA 0x00000000
+#define DDRSS_PHY_1227_DATA 0x00000000
+#define DDRSS_PHY_1228_DATA 0x00000000
+#define DDRSS_PHY_1229_DATA 0x00000000
+#define DDRSS_PHY_1230_DATA 0x00000000
+#define DDRSS_PHY_1231_DATA 0x00000000
+#define DDRSS_PHY_1232_DATA 0x00000000
+#define DDRSS_PHY_1233_DATA 0x00000000
+#define DDRSS_PHY_1234_DATA 0x00000000
+#define DDRSS_PHY_1235_DATA 0x00000000
+#define DDRSS_PHY_1236_DATA 0x00000000
+#define DDRSS_PHY_1237_DATA 0x00000000
+#define DDRSS_PHY_1238_DATA 0x00000000
+#define DDRSS_PHY_1239_DATA 0x00000000
+#define DDRSS_PHY_1240_DATA 0x00000000
+#define DDRSS_PHY_1241_DATA 0x00000000
+#define DDRSS_PHY_1242_DATA 0x00000000
+#define DDRSS_PHY_1243_DATA 0x00000000
+#define DDRSS_PHY_1244_DATA 0x00000000
+#define DDRSS_PHY_1245_DATA 0x00000000
+#define DDRSS_PHY_1246_DATA 0x00000000
+#define DDRSS_PHY_1247_DATA 0x00000000
+#define DDRSS_PHY_1248_DATA 0x00000000
+#define DDRSS_PHY_1249_DATA 0x00000000
+#define DDRSS_PHY_1250_DATA 0x00000000
+#define DDRSS_PHY_1251_DATA 0x00000000
+#define DDRSS_PHY_1252_DATA 0x00000000
+#define DDRSS_PHY_1253_DATA 0x00000000
+#define DDRSS_PHY_1254_DATA 0x00000000
+#define DDRSS_PHY_1255_DATA 0x00000000
+#define DDRSS_PHY_1256_DATA 0x00000000
+#define DDRSS_PHY_1257_DATA 0x00000000
+#define DDRSS_PHY_1258_DATA 0x00000000
+#define DDRSS_PHY_1259_DATA 0x00000000
+#define DDRSS_PHY_1260_DATA 0x00000000
+#define DDRSS_PHY_1261_DATA 0x00000000
+#define DDRSS_PHY_1262_DATA 0x00000000
+#define DDRSS_PHY_1263_DATA 0x00000000
+#define DDRSS_PHY_1264_DATA 0x00000000
+#define DDRSS_PHY_1265_DATA 0x00000000
+#define DDRSS_PHY_1266_DATA 0x00000000
+#define DDRSS_PHY_1267_DATA 0x00000000
+#define DDRSS_PHY_1268_DATA 0x00000000
+#define DDRSS_PHY_1269_DATA 0x00000000
+#define DDRSS_PHY_1270_DATA 0x00000000
+#define DDRSS_PHY_1271_DATA 0x00000000
+#define DDRSS_PHY_1272_DATA 0x00000000
+#define DDRSS_PHY_1273_DATA 0x00000000
+#define DDRSS_PHY_1274_DATA 0x00000000
+#define DDRSS_PHY_1275_DATA 0x00000000
+#define DDRSS_PHY_1276_DATA 0x00000000
+#define DDRSS_PHY_1277_DATA 0x00000000
+#define DDRSS_PHY_1278_DATA 0x00000000
+#define DDRSS_PHY_1279_DATA 0x00000000
+#define DDRSS_PHY_1280_DATA 0x00000000
+#define DDRSS_PHY_1281_DATA 0x00000100
+#define DDRSS_PHY_1282_DATA 0x00000000
+#define DDRSS_PHY_1283_DATA 0x00000000
+#define DDRSS_PHY_1284_DATA 0x00000000
+#define DDRSS_PHY_1285_DATA 0x00000000
+#define DDRSS_PHY_1286_DATA 0x00050000
+#define DDRSS_PHY_1287_DATA 0x04000100
+#define DDRSS_PHY_1288_DATA 0x00000055
+#define DDRSS_PHY_1289_DATA 0x00000000
+#define DDRSS_PHY_1290_DATA 0x00000000
+#define DDRSS_PHY_1291_DATA 0x00000000
+#define DDRSS_PHY_1292_DATA 0x00000000
+#define DDRSS_PHY_1293_DATA 0x01002000
+#define DDRSS_PHY_1294_DATA 0x00004001
+#define DDRSS_PHY_1295_DATA 0x00020028
+#define DDRSS_PHY_1296_DATA 0x00010100
+#define DDRSS_PHY_1297_DATA 0x00000001
+#define DDRSS_PHY_1298_DATA 0x00000000
+#define DDRSS_PHY_1299_DATA 0x0F0F0E06
+#define DDRSS_PHY_1300_DATA 0x00010101
+#define DDRSS_PHY_1301_DATA 0x010F0004
+#define DDRSS_PHY_1302_DATA 0x00000000
+#define DDRSS_PHY_1303_DATA 0x00000000
+#define DDRSS_PHY_1304_DATA 0x00000064
+#define DDRSS_PHY_1305_DATA 0x00000000
+#define DDRSS_PHY_1306_DATA 0x00000000
+#define DDRSS_PHY_1307_DATA 0x01020103
+#define DDRSS_PHY_1308_DATA 0x0F020102
+#define DDRSS_PHY_1309_DATA 0x03030303
+#define DDRSS_PHY_1310_DATA 0x03030303
+#define DDRSS_PHY_1311_DATA 0x00040000
+#define DDRSS_PHY_1312_DATA 0x00005201
+#define DDRSS_PHY_1313_DATA 0x00000000
+#define DDRSS_PHY_1314_DATA 0x00000000
+#define DDRSS_PHY_1315_DATA 0x00000000
+#define DDRSS_PHY_1316_DATA 0x00000000
+#define DDRSS_PHY_1317_DATA 0x00000000
+#define DDRSS_PHY_1318_DATA 0x00000000
+#define DDRSS_PHY_1319_DATA 0x07070001
+#define DDRSS_PHY_1320_DATA 0x00005400
+#define DDRSS_PHY_1321_DATA 0x000040A2
+#define DDRSS_PHY_1322_DATA 0x00024410
+#define DDRSS_PHY_1323_DATA 0x00004410
+#define DDRSS_PHY_1324_DATA 0x00004410
+#define DDRSS_PHY_1325_DATA 0x00004410
+#define DDRSS_PHY_1326_DATA 0x00004410
+#define DDRSS_PHY_1327_DATA 0x00004410
+#define DDRSS_PHY_1328_DATA 0x00004410
+#define DDRSS_PHY_1329_DATA 0x00004410
+#define DDRSS_PHY_1330_DATA 0x00004410
+#define DDRSS_PHY_1331_DATA 0x00004410
+#define DDRSS_PHY_1332_DATA 0x00000000
+#define DDRSS_PHY_1333_DATA 0x00000046
+#define DDRSS_PHY_1334_DATA 0x00010000
+#define DDRSS_PHY_1335_DATA 0x00000008
+#define DDRSS_PHY_1336_DATA 0x00000000
+#define DDRSS_PHY_1337_DATA 0x00000000
+#define DDRSS_PHY_1338_DATA 0x00000000
+#define DDRSS_PHY_1339_DATA 0x00000000
+#define DDRSS_PHY_1340_DATA 0x00000000
+#define DDRSS_PHY_1341_DATA 0x03000000
+#define DDRSS_PHY_1342_DATA 0x00000000
+#define DDRSS_PHY_1343_DATA 0x00000000
+#define DDRSS_PHY_1344_DATA 0x00000000
+#define DDRSS_PHY_1345_DATA 0x04102006
+#define DDRSS_PHY_1346_DATA 0x00041020
+#define DDRSS_PHY_1347_DATA 0x01C98C98
+#define DDRSS_PHY_1348_DATA 0x3F400000
+#define DDRSS_PHY_1349_DATA 0x3F3F1F3F
+#define DDRSS_PHY_1350_DATA 0x0000001F
+#define DDRSS_PHY_1351_DATA 0x00000000
+#define DDRSS_PHY_1352_DATA 0x00000000
+#define DDRSS_PHY_1353_DATA 0x00000000
+#define DDRSS_PHY_1354_DATA 0x00000001
+#define DDRSS_PHY_1355_DATA 0x00000000
+#define DDRSS_PHY_1356_DATA 0x00000000
+#define DDRSS_PHY_1357_DATA 0x00000000
+#define DDRSS_PHY_1358_DATA 0x00000000
+#define DDRSS_PHY_1359_DATA 0x76543210
+#define DDRSS_PHY_1360_DATA 0x00000098
+#define DDRSS_PHY_1361_DATA 0x00000000
+#define DDRSS_PHY_1362_DATA 0x00000000
+#define DDRSS_PHY_1363_DATA 0x00000000
+#define DDRSS_PHY_1364_DATA 0x00040700
+#define DDRSS_PHY_1365_DATA 0x00000000
+#define DDRSS_PHY_1366_DATA 0x00000000
+#define DDRSS_PHY_1367_DATA 0x00000000
+#define DDRSS_PHY_1368_DATA 0x00000002
+#define DDRSS_PHY_1369_DATA 0x00000100
+#define DDRSS_PHY_1370_DATA 0x00000000
+#define DDRSS_PHY_1371_DATA 0x0001F7C0
+#define DDRSS_PHY_1372_DATA 0x00020002
+#define DDRSS_PHY_1373_DATA 0x00000000
+#define DDRSS_PHY_1374_DATA 0x00001142
+#define DDRSS_PHY_1375_DATA 0x03020400
+#define DDRSS_PHY_1376_DATA 0x00000080
+#define DDRSS_PHY_1377_DATA 0x03900390
+#define DDRSS_PHY_1378_DATA 0x03900390
+#define DDRSS_PHY_1379_DATA 0x03900390
+#define DDRSS_PHY_1380_DATA 0x03900390
+#define DDRSS_PHY_1381_DATA 0x03900390
+#define DDRSS_PHY_1382_DATA 0x03900390
+#define DDRSS_PHY_1383_DATA 0x00000300
+#define DDRSS_PHY_1384_DATA 0x00000300
+#define DDRSS_PHY_1385_DATA 0x00000300
+#define DDRSS_PHY_1386_DATA 0x00000300
+#define DDRSS_PHY_1387_DATA 0x31823FC7
+#define DDRSS_PHY_1388_DATA 0x00000000
+#define DDRSS_PHY_1389_DATA 0x0C000D3F
+#define DDRSS_PHY_1390_DATA 0x30000D3F
+#define DDRSS_PHY_1391_DATA 0x300D3F11
+#define DDRSS_PHY_1392_DATA 0x01990000
+#define DDRSS_PHY_1393_DATA 0x000D3FCC
+#define DDRSS_PHY_1394_DATA 0x00000C11
+#define DDRSS_PHY_1395_DATA 0x300D3F11
+#define DDRSS_PHY_1396_DATA 0x01990000
+#define DDRSS_PHY_1397_DATA 0x300C3F11
+#define DDRSS_PHY_1398_DATA 0x01990000
+#define DDRSS_PHY_1399_DATA 0x300C3F11
+#define DDRSS_PHY_1400_DATA 0x01990000
+#define DDRSS_PHY_1401_DATA 0x300D3F11
+#define DDRSS_PHY_1402_DATA 0x01990000
+#define DDRSS_PHY_1403_DATA 0x300D3F11
+#define DDRSS_PHY_1404_DATA 0x01990000
+#define DDRSS_PHY_1405_DATA 0x20040001
diff --git a/roms/u-boot/arch/arm/dts/k3-am64-main.dtsi b/roms/u-boot/arch/arm/dts/k3-am64-main.dtsi
new file mode 100644
index 000000000..a65011b39
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am64-main.dtsi
@@ -0,0 +1,567 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x70000000 0x200000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x1a000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01840000 0x00 0xC0000>;	/* GICR */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	dmss: dmss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,interrupt-ranges = <4 68 36>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x40000>,
+			      <0x00 0x4b800000 0x00 0x400000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>, /* SAUL_TX_1_CHAN */
+						<0x27>, /* ICSSG_0_TX_CHAN */
+						<0x28>; /* ICSSG_1_TX_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>, /* RING_SAUL_TX_1_CHAN */
+						<0x14>, /* RING_ICSSG_0_TX_CHAN */
+						<0x15>; /* RING_ICSSG_1_TX_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>, /* SAUL_RX_3_CHAN */
+						<0x35>, /* ICSSG_0_RX_CHAN */
+						<0x37>; /* ICSSG_1_RX_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>, /* FLOW_SAUL_RX_2/3_CHAN */
+						<0x36>, /* FLOW_ICSSG_0_RX_CHAN */
+						<0x38>; /* FLOW_ICSSG_1_RX_CHAN */
+		};
+	};
+
+	dmsc: dmsc@44043000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes= <&secure_proxy_main 12>,
+			<&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2d0>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_conf: syscon@43000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x43000000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x43000000 0x20000>;
+
+		chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x00000014 0x4>;
+		};
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		dmas = <&main_pktdma 0xc300 0>, <&main_pktdma 0x4300 0>;
+		dma-names = "tx0", "rx0";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+	};
+
+	main_spi3: spi@20130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20130000 0x00 0x400>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 144 0>;
+	};
+
+	main_spi4: spi@20140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20140000 0x00 0x400>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 145 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 145 0>;
+	};
+
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am64-sdhci-8bit";
+		reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x7>;
+		ti,otap-del-sel-hs400 = <0x4>;
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am64-sdhci-4bit";
+		reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,clkbuf-sel = <0x7>;
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x8000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 1>;
+		assigned-clock-parents = <&k3_clks 13 9>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_pktdma 0xC500 15>,
+		       <&main_pktdma 0xC501 15>,
+		       <&main_pktdma 0xC502 15>,
+		       <&main_pktdma 0xC503 15>,
+		       <&main_pktdma 0xC504 15>,
+		       <&main_pktdma 0xC505 15>,
+		       <&main_pktdma 0xC506 15>,
+		       <&main_pktdma 0xC507 15>,
+		       <&main_pktdma 0x4500 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 de ad be ef];
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 01 de ad be ef];
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 13 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <77 0 IRQ_TYPE_EDGE_RISING>,
+			     <77 1 IRQ_TYPE_EDGE_RISING>,
+			     <77 2 IRQ_TYPE_EDGE_RISING>,
+			     <77 3 IRQ_TYPE_EDGE_RISING>,
+			     <77 4 IRQ_TYPE_EDGE_RISING>,
+			     <77 5 IRQ_TYPE_EDGE_RISING>,
+			     <77 6 IRQ_TYPE_EDGE_RISING>,
+			     <77 7 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00601000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <78 0 IRQ_TYPE_EDGE_RISING>,
+			     <78 1 IRQ_TYPE_EDGE_RISING>,
+			     <78 2 IRQ_TYPE_EDGE_RISING>,
+			     <78 3 IRQ_TYPE_EDGE_RISING>,
+			     <78 4 IRQ_TYPE_EDGE_RISING>,
+			     <78 5 IRQ_TYPE_EDGE_RISING>,
+			     <78 6 IRQ_TYPE_EDGE_RISING>,
+			     <78 7 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x20000000 0x0 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 102 2>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x20010000 0x0 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 103 2>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x0 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 104 2>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x0 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 105 2>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am64-mcu.dtsi b/roms/u-boot/arch/arm/dts/k3-am64-mcu.dtsi
new file mode 100644
index 000000000..1d2be485a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am64-mcu.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM64 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+	};
+
+	mcu_uart1: serial@4a10000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a10000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 160 0>;
+		clock-names = "fclk";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+	};
+
+	mcu_i2c1: i2c@4910000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04910000 0x00 0x100>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 2>;
+		clock-names = "fck";
+	};
+
+	mcu_spi0: spi@4b00000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x04b00000 0x00 0x400>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 147 0>;
+	};
+
+	mcu_spi1: spi@4b10000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x04b10000 0x00 0x400>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 148 0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am64-sk-lp4-1333MTs.dtsi b/roms/u-boot/arch/arm/dts/k3-am64-sk-lp4-1333MTs.dtsi
new file mode 100644
index 000000000..64a159f6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am64-sk-lp4-1333MTs.dtsi
@@ -0,0 +1,2190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+ * This file was generated with the
+ * AM64x SysConfig DDR Subsystem Register Configuration Tool v0.06.00
+ * Mon Apr 26 2021 20:47:47 GMT-0500 (Central Daylight Time)
+ * DDR Type: LPDDR4
+ * F0 = 50MHz    F1 = 666.7MHz    F2 = 666.7MHz
+ * Density (per channel): 16Gb
+ * Number of Ranks: 1
+*/
+
+#define DDRSS_PLL_FHS_CNT 6
+#define DDRSS_PLL_FREQUENCY_1 333350000
+#define DDRSS_PLL_FREQUENCY_2 333350000
+
+#define DDRSS_CTL_0_DATA 0x00000B00
+#define DDRSS_CTL_1_DATA 0x00000000
+#define DDRSS_CTL_2_DATA 0x00000000
+#define DDRSS_CTL_3_DATA 0x00000000
+#define DDRSS_CTL_4_DATA 0x00000000
+#define DDRSS_CTL_5_DATA 0x00000000
+#define DDRSS_CTL_6_DATA 0x00000000
+#define DDRSS_CTL_7_DATA 0x00002710
+#define DDRSS_CTL_8_DATA 0x000186A0
+#define DDRSS_CTL_9_DATA 0x00000005
+#define DDRSS_CTL_10_DATA 0x00000064
+#define DDRSS_CTL_11_DATA 0x000208D6
+#define DDRSS_CTL_12_DATA 0x00145856
+#define DDRSS_CTL_13_DATA 0x00000005
+#define DDRSS_CTL_14_DATA 0x00000536
+#define DDRSS_CTL_15_DATA 0x000208D6
+#define DDRSS_CTL_16_DATA 0x00145856
+#define DDRSS_CTL_17_DATA 0x00000005
+#define DDRSS_CTL_18_DATA 0x00000536
+#define DDRSS_CTL_19_DATA 0x01010100
+#define DDRSS_CTL_20_DATA 0x01010100
+#define DDRSS_CTL_21_DATA 0x01000110
+#define DDRSS_CTL_22_DATA 0x02010002
+#define DDRSS_CTL_23_DATA 0x0000000A
+#define DDRSS_CTL_24_DATA 0x000186A0
+#define DDRSS_CTL_25_DATA 0x00000000
+#define DDRSS_CTL_26_DATA 0x00000000
+#define DDRSS_CTL_27_DATA 0x00000000
+#define DDRSS_CTL_28_DATA 0x00000000
+#define DDRSS_CTL_29_DATA 0x00020200
+#define DDRSS_CTL_30_DATA 0x00000000
+#define DDRSS_CTL_31_DATA 0x00000000
+#define DDRSS_CTL_32_DATA 0x00000000
+#define DDRSS_CTL_33_DATA 0x00000000
+#define DDRSS_CTL_34_DATA 0x02000010
+#define DDRSS_CTL_35_DATA 0x00001B1B
+#define DDRSS_CTL_36_DATA 0x00000000
+#define DDRSS_CTL_37_DATA 0x00000000
+#define DDRSS_CTL_38_DATA 0x0000040C
+#define DDRSS_CTL_39_DATA 0x00000000
+#define DDRSS_CTL_40_DATA 0x0000081C
+#define DDRSS_CTL_41_DATA 0x00000000
+#define DDRSS_CTL_42_DATA 0x0000081C
+#define DDRSS_CTL_43_DATA 0x00000000
+#define DDRSS_CTL_44_DATA 0x05000804
+#define DDRSS_CTL_45_DATA 0x00000700
+#define DDRSS_CTL_46_DATA 0x09090004
+#define DDRSS_CTL_47_DATA 0x00000203
+#define DDRSS_CTL_48_DATA 0x00290006
+#define DDRSS_CTL_49_DATA 0x0909001D
+#define DDRSS_CTL_50_DATA 0x0000150C
+#define DDRSS_CTL_51_DATA 0x00290006
+#define DDRSS_CTL_52_DATA 0x0909001D
+#define DDRSS_CTL_53_DATA 0x0900150C
+#define DDRSS_CTL_54_DATA 0x000A0A09
+#define DDRSS_CTL_55_DATA 0x040006DB
+#define DDRSS_CTL_56_DATA 0x09092004
+#define DDRSS_CTL_57_DATA 0x00000A0A
+#define DDRSS_CTL_58_DATA 0x05005B68
+#define DDRSS_CTL_59_DATA 0x09092005
+#define DDRSS_CTL_60_DATA 0x00000A0A
+#define DDRSS_CTL_61_DATA 0x05005B68
+#define DDRSS_CTL_62_DATA 0x03042005
+#define DDRSS_CTL_63_DATA 0x04050002
+#define DDRSS_CTL_64_DATA 0x0E0D0E0D
+#define DDRSS_CTL_65_DATA 0x01010008
+#define DDRSS_CTL_66_DATA 0x041A1A07
+#define DDRSS_CTL_67_DATA 0x030E0E03
+#define DDRSS_CTL_68_DATA 0x00000E0E
+#define DDRSS_CTL_69_DATA 0x00000101
+#define DDRSS_CTL_70_DATA 0x00000000
+#define DDRSS_CTL_71_DATA 0x01000000
+#define DDRSS_CTL_72_DATA 0x00130803
+#define DDRSS_CTL_73_DATA 0x000000BB
+#define DDRSS_CTL_74_DATA 0x000000FE
+#define DDRSS_CTL_75_DATA 0x00000A20
+#define DDRSS_CTL_76_DATA 0x000000FE
+#define DDRSS_CTL_77_DATA 0x00000A20
+#define DDRSS_CTL_78_DATA 0x00000005
+#define DDRSS_CTL_79_DATA 0x0000000A
+#define DDRSS_CTL_80_DATA 0x00000010
+#define DDRSS_CTL_81_DATA 0x0000007F
+#define DDRSS_CTL_82_DATA 0x0000013D
+#define DDRSS_CTL_83_DATA 0x0000007F
+#define DDRSS_CTL_84_DATA 0x0000013D
+#define DDRSS_CTL_85_DATA 0x03004000
+#define DDRSS_CTL_86_DATA 0x00001201
+#define DDRSS_CTL_87_DATA 0x00050005
+#define DDRSS_CTL_88_DATA 0x00000005
+#define DDRSS_CTL_89_DATA 0x00000000
+#define DDRSS_CTL_90_DATA 0x05101008
+#define DDRSS_CTL_91_DATA 0x05030A05
+#define DDRSS_CTL_92_DATA 0x05030A05
+#define DDRSS_CTL_93_DATA 0x01030A05
+#define DDRSS_CTL_94_DATA 0x02010201
+#define DDRSS_CTL_95_DATA 0x00001401
+#define DDRSS_CTL_96_DATA 0x01030014
+#define DDRSS_CTL_97_DATA 0x01030103
+#define DDRSS_CTL_98_DATA 0x00000103
+#define DDRSS_CTL_99_DATA 0x00000000
+#define DDRSS_CTL_100_DATA 0x05010303
+#define DDRSS_CTL_101_DATA 0x0A040505
+#define DDRSS_CTL_102_DATA 0x05050203
+#define DDRSS_CTL_103_DATA 0x030A0505
+#define DDRSS_CTL_104_DATA 0x05050502
+#define DDRSS_CTL_105_DATA 0x03030305
+#define DDRSS_CTL_106_DATA 0x03010000
+#define DDRSS_CTL_107_DATA 0x00010000
+#define DDRSS_CTL_108_DATA 0x00000000
+#define DDRSS_CTL_109_DATA 0x01000000
+#define DDRSS_CTL_110_DATA 0x80104002
+#define DDRSS_CTL_111_DATA 0x00040003
+#define DDRSS_CTL_112_DATA 0x00040005
+#define DDRSS_CTL_113_DATA 0x00030000
+#define DDRSS_CTL_114_DATA 0x00050004
+#define DDRSS_CTL_115_DATA 0x00000004
+#define DDRSS_CTL_116_DATA 0x00040003
+#define DDRSS_CTL_117_DATA 0x00040005
+#define DDRSS_CTL_118_DATA 0x00000000
+#define DDRSS_CTL_119_DATA 0x00002EC0
+#define DDRSS_CTL_120_DATA 0x00002EC0
+#define DDRSS_CTL_121_DATA 0x00002EC0
+#define DDRSS_CTL_122_DATA 0x00002EC0
+#define DDRSS_CTL_123_DATA 0x00002EC0
+#define DDRSS_CTL_124_DATA 0x00000000
+#define DDRSS_CTL_125_DATA 0x0000051D
+#define DDRSS_CTL_126_DATA 0x00028800
+#define DDRSS_CTL_127_DATA 0x00028800
+#define DDRSS_CTL_128_DATA 0x00028800
+#define DDRSS_CTL_129_DATA 0x00028800
+#define DDRSS_CTL_130_DATA 0x00028800
+#define DDRSS_CTL_131_DATA 0x00000000
+#define DDRSS_CTL_132_DATA 0x000046E0
+#define DDRSS_CTL_133_DATA 0x00028800
+#define DDRSS_CTL_134_DATA 0x00028800
+#define DDRSS_CTL_135_DATA 0x00028800
+#define DDRSS_CTL_136_DATA 0x00028800
+#define DDRSS_CTL_137_DATA 0x00028800
+#define DDRSS_CTL_138_DATA 0x00000000
+#define DDRSS_CTL_139_DATA 0x000046E0
+#define DDRSS_CTL_140_DATA 0x00000000
+#define DDRSS_CTL_141_DATA 0x00000000
+#define DDRSS_CTL_142_DATA 0x00000000
+#define DDRSS_CTL_143_DATA 0x00000000
+#define DDRSS_CTL_144_DATA 0x00000000
+#define DDRSS_CTL_145_DATA 0x00000000
+#define DDRSS_CTL_146_DATA 0x00000000
+#define DDRSS_CTL_147_DATA 0x00000000
+#define DDRSS_CTL_148_DATA 0x00000000
+#define DDRSS_CTL_149_DATA 0x00000000
+#define DDRSS_CTL_150_DATA 0x00000000
+#define DDRSS_CTL_151_DATA 0x00000000
+#define DDRSS_CTL_152_DATA 0x00000000
+#define DDRSS_CTL_153_DATA 0x00000000
+#define DDRSS_CTL_154_DATA 0x00000000
+#define DDRSS_CTL_155_DATA 0x00000000
+#define DDRSS_CTL_156_DATA 0x03050000
+#define DDRSS_CTL_157_DATA 0x03050305
+#define DDRSS_CTL_158_DATA 0x00000000
+#define DDRSS_CTL_159_DATA 0x07010A09
+#define DDRSS_CTL_160_DATA 0x000E0A09
+#define DDRSS_CTL_161_DATA 0x010A0900
+#define DDRSS_CTL_162_DATA 0x0E0A0907
+#define DDRSS_CTL_163_DATA 0x0A090000
+#define DDRSS_CTL_164_DATA 0x0A090701
+#define DDRSS_CTL_165_DATA 0x0000000E
+#define DDRSS_CTL_166_DATA 0x00040003
+#define DDRSS_CTL_167_DATA 0x00000007
+#define DDRSS_CTL_168_DATA 0x00000000
+#define DDRSS_CTL_169_DATA 0x00000000
+#define DDRSS_CTL_170_DATA 0x00000000
+#define DDRSS_CTL_171_DATA 0x00000000
+#define DDRSS_CTL_172_DATA 0x00000000
+#define DDRSS_CTL_173_DATA 0x00000000
+#define DDRSS_CTL_174_DATA 0x01000000
+#define DDRSS_CTL_175_DATA 0x00000000
+#define DDRSS_CTL_176_DATA 0x00001500
+#define DDRSS_CTL_177_DATA 0x0000100E
+#define DDRSS_CTL_178_DATA 0x00000002
+#define DDRSS_CTL_179_DATA 0x00000000
+#define DDRSS_CTL_180_DATA 0x00000001
+#define DDRSS_CTL_181_DATA 0x00000002
+#define DDRSS_CTL_182_DATA 0x00000C00
+#define DDRSS_CTL_183_DATA 0x00001000
+#define DDRSS_CTL_184_DATA 0x00000C00
+#define DDRSS_CTL_185_DATA 0x00001000
+#define DDRSS_CTL_186_DATA 0x00000C00
+#define DDRSS_CTL_187_DATA 0x00001000
+#define DDRSS_CTL_188_DATA 0x00000000
+#define DDRSS_CTL_189_DATA 0x00000000
+#define DDRSS_CTL_190_DATA 0x00000000
+#define DDRSS_CTL_191_DATA 0x00000000
+#define DDRSS_CTL_192_DATA 0x0005000A
+#define DDRSS_CTL_193_DATA 0x0404000D
+#define DDRSS_CTL_194_DATA 0x0000000D
+#define DDRSS_CTL_195_DATA 0x00430086
+#define DDRSS_CTL_196_DATA 0x050500A7
+#define DDRSS_CTL_197_DATA 0x000000A7
+#define DDRSS_CTL_198_DATA 0x00430086
+#define DDRSS_CTL_199_DATA 0x050500A7
+#define DDRSS_CTL_200_DATA 0x000000A7
+#define DDRSS_CTL_201_DATA 0x00000000
+#define DDRSS_CTL_202_DATA 0x00000000
+#define DDRSS_CTL_203_DATA 0x00000000
+#define DDRSS_CTL_204_DATA 0x00000000
+#define DDRSS_CTL_205_DATA 0x00000004
+#define DDRSS_CTL_206_DATA 0x00000000
+#define DDRSS_CTL_207_DATA 0x00000000
+#define DDRSS_CTL_208_DATA 0x00000024
+#define DDRSS_CTL_209_DATA 0x00000012
+#define DDRSS_CTL_210_DATA 0x00000000
+#define DDRSS_CTL_211_DATA 0x00000024
+#define DDRSS_CTL_212_DATA 0x00000012
+#define DDRSS_CTL_213_DATA 0x00000000
+#define DDRSS_CTL_214_DATA 0x00000004
+#define DDRSS_CTL_215_DATA 0x00000000
+#define DDRSS_CTL_216_DATA 0x00000000
+#define DDRSS_CTL_217_DATA 0x00000024
+#define DDRSS_CTL_218_DATA 0x00000012
+#define DDRSS_CTL_219_DATA 0x00000000
+#define DDRSS_CTL_220_DATA 0x00000024
+#define DDRSS_CTL_221_DATA 0x00000012
+#define DDRSS_CTL_222_DATA 0x00000000
+#define DDRSS_CTL_223_DATA 0x00000000
+#define DDRSS_CTL_224_DATA 0x00000031
+#define DDRSS_CTL_225_DATA 0x00000031
+#define DDRSS_CTL_226_DATA 0x00000031
+#define DDRSS_CTL_227_DATA 0x00000031
+#define DDRSS_CTL_228_DATA 0x00000031
+#define DDRSS_CTL_229_DATA 0x00000031
+#define DDRSS_CTL_230_DATA 0x00000000
+#define DDRSS_CTL_231_DATA 0x00000000
+#define DDRSS_CTL_232_DATA 0x00000000
+#define DDRSS_CTL_233_DATA 0x00000000
+#define DDRSS_CTL_234_DATA 0x00000000
+#define DDRSS_CTL_235_DATA 0x00000000
+#define DDRSS_CTL_236_DATA 0x00000000
+#define DDRSS_CTL_237_DATA 0x00000000
+#define DDRSS_CTL_238_DATA 0x00000000
+#define DDRSS_CTL_239_DATA 0x00000000
+#define DDRSS_CTL_240_DATA 0x00000000
+#define DDRSS_CTL_241_DATA 0x00000000
+#define DDRSS_CTL_242_DATA 0x00000000
+#define DDRSS_CTL_243_DATA 0x00000000
+#define DDRSS_CTL_244_DATA 0x00000000
+#define DDRSS_CTL_245_DATA 0x00000000
+#define DDRSS_CTL_246_DATA 0x00000000
+#define DDRSS_CTL_247_DATA 0x00000000
+#define DDRSS_CTL_248_DATA 0x00000000
+#define DDRSS_CTL_249_DATA 0x00000000
+#define DDRSS_CTL_250_DATA 0x00000000
+#define DDRSS_CTL_251_DATA 0x00000000
+#define DDRSS_CTL_252_DATA 0x00000000
+#define DDRSS_CTL_253_DATA 0x00000000
+#define DDRSS_CTL_254_DATA 0x66006666
+#define DDRSS_CTL_255_DATA 0x00002766
+#define DDRSS_CTL_256_DATA 0x00000027
+#define DDRSS_CTL_257_DATA 0x00000027
+#define DDRSS_CTL_258_DATA 0x00000027
+#define DDRSS_CTL_259_DATA 0x00000027
+#define DDRSS_CTL_260_DATA 0x00000027
+#define DDRSS_CTL_261_DATA 0x00000000
+#define DDRSS_CTL_262_DATA 0x00000000
+#define DDRSS_CTL_263_DATA 0x0000000F
+#define DDRSS_CTL_264_DATA 0x0000000F
+#define DDRSS_CTL_265_DATA 0x0000000F
+#define DDRSS_CTL_266_DATA 0x0000000F
+#define DDRSS_CTL_267_DATA 0x0000000F
+#define DDRSS_CTL_268_DATA 0x0000000F
+#define DDRSS_CTL_269_DATA 0x00000000
+#define DDRSS_CTL_270_DATA 0x00000000
+#define DDRSS_CTL_271_DATA 0x00000015
+#define DDRSS_CTL_272_DATA 0x00000015
+#define DDRSS_CTL_273_DATA 0x00000000
+#define DDRSS_CTL_274_DATA 0x00000015
+#define DDRSS_CTL_275_DATA 0x00000015
+#define DDRSS_CTL_276_DATA 0x00000020
+#define DDRSS_CTL_277_DATA 0x00010000
+#define DDRSS_CTL_278_DATA 0x00000100
+#define DDRSS_CTL_279_DATA 0x00000000
+#define DDRSS_CTL_280_DATA 0x00000000
+#define DDRSS_CTL_281_DATA 0x00000101
+#define DDRSS_CTL_282_DATA 0x00000000
+#define DDRSS_CTL_283_DATA 0x00000000
+#define DDRSS_CTL_284_DATA 0x00000000
+#define DDRSS_CTL_285_DATA 0x00000000
+#define DDRSS_CTL_286_DATA 0x00000000
+#define DDRSS_CTL_287_DATA 0x00000000
+#define DDRSS_CTL_288_DATA 0x00000000
+#define DDRSS_CTL_289_DATA 0x00000000
+#define DDRSS_CTL_290_DATA 0x0C181511
+#define DDRSS_CTL_291_DATA 0x00000304
+#define DDRSS_CTL_292_DATA 0x00000000
+#define DDRSS_CTL_293_DATA 0x00000000
+#define DDRSS_CTL_294_DATA 0x00000000
+#define DDRSS_CTL_295_DATA 0x00000000
+#define DDRSS_CTL_296_DATA 0x00000000
+#define DDRSS_CTL_297_DATA 0x00000000
+#define DDRSS_CTL_298_DATA 0x00000000
+#define DDRSS_CTL_299_DATA 0x00000000
+#define DDRSS_CTL_300_DATA 0x00000000
+#define DDRSS_CTL_301_DATA 0x00000000
+#define DDRSS_CTL_302_DATA 0x00000000
+#define DDRSS_CTL_303_DATA 0x00000000
+#define DDRSS_CTL_304_DATA 0x00000000
+#define DDRSS_CTL_305_DATA 0x00020000
+#define DDRSS_CTL_306_DATA 0x00400100
+#define DDRSS_CTL_307_DATA 0x00080032
+#define DDRSS_CTL_308_DATA 0x01000200
+#define DDRSS_CTL_309_DATA 0x029B0040
+#define DDRSS_CTL_310_DATA 0x00020014
+#define DDRSS_CTL_311_DATA 0x00400100
+#define DDRSS_CTL_312_DATA 0x0014029B
+#define DDRSS_CTL_313_DATA 0x00030000
+#define DDRSS_CTL_314_DATA 0x00220022
+#define DDRSS_CTL_315_DATA 0x00000100
+#define DDRSS_CTL_316_DATA 0x01010000
+#define DDRSS_CTL_317_DATA 0x00000000
+#define DDRSS_CTL_318_DATA 0x3FFF0000
+#define DDRSS_CTL_319_DATA 0x000FFF00
+#define DDRSS_CTL_320_DATA 0xFFFFFFFF
+#define DDRSS_CTL_321_DATA 0x000FFF00
+#define DDRSS_CTL_322_DATA 0x0B000000
+#define DDRSS_CTL_323_DATA 0x0001FFFF
+#define DDRSS_CTL_324_DATA 0x01010101
+#define DDRSS_CTL_325_DATA 0x01010101
+#define DDRSS_CTL_326_DATA 0x00000118
+#define DDRSS_CTL_327_DATA 0x00000C01
+#define DDRSS_CTL_328_DATA 0x01000100
+#define DDRSS_CTL_329_DATA 0x00000000
+#define DDRSS_CTL_330_DATA 0x01000000
+#define DDRSS_CTL_331_DATA 0x01030303
+#define DDRSS_CTL_332_DATA 0x00000000
+#define DDRSS_CTL_333_DATA 0x00000000
+#define DDRSS_CTL_334_DATA 0x00000000
+#define DDRSS_CTL_335_DATA 0x00000000
+#define DDRSS_CTL_336_DATA 0x00000000
+#define DDRSS_CTL_337_DATA 0x00000000
+#define DDRSS_CTL_338_DATA 0x00000000
+#define DDRSS_CTL_339_DATA 0x00000000
+#define DDRSS_CTL_340_DATA 0x00000000
+#define DDRSS_CTL_341_DATA 0x00000000
+#define DDRSS_CTL_342_DATA 0x00000000
+#define DDRSS_CTL_343_DATA 0x00000000
+#define DDRSS_CTL_344_DATA 0x00000000
+#define DDRSS_CTL_345_DATA 0x00000000
+#define DDRSS_CTL_346_DATA 0x00000000
+#define DDRSS_CTL_347_DATA 0x00000000
+#define DDRSS_CTL_348_DATA 0x00000000
+#define DDRSS_CTL_349_DATA 0x00000000
+#define DDRSS_CTL_350_DATA 0x00000000
+#define DDRSS_CTL_351_DATA 0x00000000
+#define DDRSS_CTL_352_DATA 0x00000000
+#define DDRSS_CTL_353_DATA 0x00000000
+#define DDRSS_CTL_354_DATA 0x00000000
+#define DDRSS_CTL_355_DATA 0x00000000
+#define DDRSS_CTL_356_DATA 0x00000000
+#define DDRSS_CTL_357_DATA 0x00000000
+#define DDRSS_CTL_358_DATA 0x00000000
+#define DDRSS_CTL_359_DATA 0x00000000
+#define DDRSS_CTL_360_DATA 0x00000000
+#define DDRSS_CTL_361_DATA 0x00000000
+#define DDRSS_CTL_362_DATA 0x00000000
+#define DDRSS_CTL_363_DATA 0x00000000
+#define DDRSS_CTL_364_DATA 0x00000000
+#define DDRSS_CTL_365_DATA 0x00000000
+#define DDRSS_CTL_366_DATA 0x00000000
+#define DDRSS_CTL_367_DATA 0x00000000
+#define DDRSS_CTL_368_DATA 0x00000000
+#define DDRSS_CTL_369_DATA 0x00000000
+#define DDRSS_CTL_370_DATA 0x00000000
+#define DDRSS_CTL_371_DATA 0x01000101
+#define DDRSS_CTL_372_DATA 0x01010001
+#define DDRSS_CTL_373_DATA 0x00010101
+#define DDRSS_CTL_374_DATA 0x01050503
+#define DDRSS_CTL_375_DATA 0x05020201
+#define DDRSS_CTL_376_DATA 0x08080B0B
+#define DDRSS_CTL_377_DATA 0x00080308
+#define DDRSS_CTL_378_DATA 0x000C030E
+#define DDRSS_CTL_379_DATA 0x000C0310
+#define DDRSS_CTL_380_DATA 0x0C0C0810
+#define DDRSS_CTL_381_DATA 0x01000000
+#define DDRSS_CTL_382_DATA 0x03010301
+#define DDRSS_CTL_383_DATA 0x04000101
+#define DDRSS_CTL_384_DATA 0x1B000004
+#define DDRSS_CTL_385_DATA 0x00000176
+#define DDRSS_CTL_386_DATA 0x00000200
+#define DDRSS_CTL_387_DATA 0x00000200
+#define DDRSS_CTL_388_DATA 0x00000200
+#define DDRSS_CTL_389_DATA 0x00000200
+#define DDRSS_CTL_390_DATA 0x00000693
+#define DDRSS_CTL_391_DATA 0x00000E9C
+#define DDRSS_CTL_392_DATA 0x03050202
+#define DDRSS_CTL_393_DATA 0x00240201
+#define DDRSS_CTL_394_DATA 0x00001440
+#define DDRSS_CTL_395_DATA 0x00000200
+#define DDRSS_CTL_396_DATA 0x00000200
+#define DDRSS_CTL_397_DATA 0x00000200
+#define DDRSS_CTL_398_DATA 0x00000200
+#define DDRSS_CTL_399_DATA 0x00005B20
+#define DDRSS_CTL_400_DATA 0x0000CA80
+#define DDRSS_CTL_401_DATA 0x080D0402
+#define DDRSS_CTL_402_DATA 0x00240405
+#define DDRSS_CTL_403_DATA 0x00001440
+#define DDRSS_CTL_404_DATA 0x00000200
+#define DDRSS_CTL_405_DATA 0x00000200
+#define DDRSS_CTL_406_DATA 0x00000200
+#define DDRSS_CTL_407_DATA 0x00000200
+#define DDRSS_CTL_408_DATA 0x00005B20
+#define DDRSS_CTL_409_DATA 0x0000CA80
+#define DDRSS_CTL_410_DATA 0x080D0402
+#define DDRSS_CTL_411_DATA 0x00000405
+#define DDRSS_CTL_412_DATA 0x00000000
+#define DDRSS_CTL_413_DATA 0x0302000A
+#define DDRSS_CTL_414_DATA 0x01000500
+#define DDRSS_CTL_415_DATA 0x01010001
+#define DDRSS_CTL_416_DATA 0x00010001
+#define DDRSS_CTL_417_DATA 0x01010001
+#define DDRSS_CTL_418_DATA 0x02010000
+#define DDRSS_CTL_419_DATA 0x00000200
+#define DDRSS_CTL_420_DATA 0x02000201
+#define DDRSS_CTL_421_DATA 0x10100600
+#define DDRSS_CTL_422_DATA 0x00202020
+#define DDRSS_PI_0_DATA 0x00000B00
+#define DDRSS_PI_1_DATA 0x00000000
+#define DDRSS_PI_2_DATA 0x00000000
+#define DDRSS_PI_3_DATA 0x01000000
+#define DDRSS_PI_4_DATA 0x00000001
+#define DDRSS_PI_5_DATA 0x00010064
+#define DDRSS_PI_6_DATA 0x00000000
+#define DDRSS_PI_7_DATA 0x00000000
+#define DDRSS_PI_8_DATA 0x00000000
+#define DDRSS_PI_9_DATA 0x00000000
+#define DDRSS_PI_10_DATA 0x00000000
+#define DDRSS_PI_11_DATA 0x00000002
+#define DDRSS_PI_12_DATA 0x00000007
+#define DDRSS_PI_13_DATA 0x00010001
+#define DDRSS_PI_14_DATA 0x08000000
+#define DDRSS_PI_15_DATA 0x00010300
+#define DDRSS_PI_16_DATA 0x00000005
+#define DDRSS_PI_17_DATA 0x00000000
+#define DDRSS_PI_18_DATA 0x00000000
+#define DDRSS_PI_19_DATA 0x00000000
+#define DDRSS_PI_20_DATA 0x00000000
+#define DDRSS_PI_21_DATA 0x00000000
+#define DDRSS_PI_22_DATA 0x00000000
+#define DDRSS_PI_23_DATA 0x00010000
+#define DDRSS_PI_24_DATA 0x280A0001
+#define DDRSS_PI_25_DATA 0x00000000
+#define DDRSS_PI_26_DATA 0x00010000
+#define DDRSS_PI_27_DATA 0x00003200
+#define DDRSS_PI_28_DATA 0x00000000
+#define DDRSS_PI_29_DATA 0x00000000
+#define DDRSS_PI_30_DATA 0x01010102
+#define DDRSS_PI_31_DATA 0x00000000
+#define DDRSS_PI_32_DATA 0x00000000
+#define DDRSS_PI_33_DATA 0x00000000
+#define DDRSS_PI_34_DATA 0x00000001
+#define DDRSS_PI_35_DATA 0x000000AA
+#define DDRSS_PI_36_DATA 0x00000055
+#define DDRSS_PI_37_DATA 0x000000B5
+#define DDRSS_PI_38_DATA 0x0000004A
+#define DDRSS_PI_39_DATA 0x00000056
+#define DDRSS_PI_40_DATA 0x000000A9
+#define DDRSS_PI_41_DATA 0x000000A9
+#define DDRSS_PI_42_DATA 0x000000B5
+#define DDRSS_PI_43_DATA 0x00000000
+#define DDRSS_PI_44_DATA 0x00000000
+#define DDRSS_PI_45_DATA 0x00010100
+#define DDRSS_PI_46_DATA 0x00000014
+#define DDRSS_PI_47_DATA 0x000007D0
+#define DDRSS_PI_48_DATA 0x00000300
+#define DDRSS_PI_49_DATA 0x00000000
+#define DDRSS_PI_50_DATA 0x00000000
+#define DDRSS_PI_51_DATA 0x01000000
+#define DDRSS_PI_52_DATA 0x00010101
+#define DDRSS_PI_53_DATA 0x01000000
+#define DDRSS_PI_54_DATA 0x03000000
+#define DDRSS_PI_55_DATA 0x00000000
+#define DDRSS_PI_56_DATA 0x00001701
+#define DDRSS_PI_57_DATA 0x00000000
+#define DDRSS_PI_58_DATA 0x00000000
+#define DDRSS_PI_59_DATA 0x00000000
+#define DDRSS_PI_60_DATA 0x0A0A140A
+#define DDRSS_PI_61_DATA 0x10020101
+#define DDRSS_PI_62_DATA 0x01000210
+#define DDRSS_PI_63_DATA 0x05000404
+#define DDRSS_PI_64_DATA 0x00010001
+#define DDRSS_PI_65_DATA 0x0001000E
+#define DDRSS_PI_66_DATA 0x01010100
+#define DDRSS_PI_67_DATA 0x00010000
+#define DDRSS_PI_68_DATA 0x00000034
+#define DDRSS_PI_69_DATA 0x00000000
+#define DDRSS_PI_70_DATA 0x00000000
+#define DDRSS_PI_71_DATA 0x0000FFFF
+#define DDRSS_PI_72_DATA 0x00000000
+#define DDRSS_PI_73_DATA 0x00000000
+#define DDRSS_PI_74_DATA 0x00000000
+#define DDRSS_PI_75_DATA 0x00000000
+#define DDRSS_PI_76_DATA 0x01000000
+#define DDRSS_PI_77_DATA 0x08000100
+#define DDRSS_PI_78_DATA 0x00020000
+#define DDRSS_PI_79_DATA 0x00010002
+#define DDRSS_PI_80_DATA 0x00000001
+#define DDRSS_PI_81_DATA 0x00020001
+#define DDRSS_PI_82_DATA 0x00020002
+#define DDRSS_PI_83_DATA 0x00000000
+#define DDRSS_PI_84_DATA 0x00000000
+#define DDRSS_PI_85_DATA 0x00000000
+#define DDRSS_PI_86_DATA 0x00000000
+#define DDRSS_PI_87_DATA 0x00000000
+#define DDRSS_PI_88_DATA 0x00000000
+#define DDRSS_PI_89_DATA 0x00000000
+#define DDRSS_PI_90_DATA 0x00000000
+#define DDRSS_PI_91_DATA 0x00000400
+#define DDRSS_PI_92_DATA 0x0A090B0C
+#define DDRSS_PI_93_DATA 0x04060708
+#define DDRSS_PI_94_DATA 0x01000005
+#define DDRSS_PI_95_DATA 0x00000800
+#define DDRSS_PI_96_DATA 0x00000000
+#define DDRSS_PI_97_DATA 0x00010008
+#define DDRSS_PI_98_DATA 0x00000000
+#define DDRSS_PI_99_DATA 0x0000AA00
+#define DDRSS_PI_100_DATA 0x00000000
+#define DDRSS_PI_101_DATA 0x00010000
+#define DDRSS_PI_102_DATA 0x00000000
+#define DDRSS_PI_103_DATA 0x00000000
+#define DDRSS_PI_104_DATA 0x00000000
+#define DDRSS_PI_105_DATA 0x00000000
+#define DDRSS_PI_106_DATA 0x00000000
+#define DDRSS_PI_107_DATA 0x00000000
+#define DDRSS_PI_108_DATA 0x00000000
+#define DDRSS_PI_109_DATA 0x00000000
+#define DDRSS_PI_110_DATA 0x00000000
+#define DDRSS_PI_111_DATA 0x00000000
+#define DDRSS_PI_112_DATA 0x00000000
+#define DDRSS_PI_113_DATA 0x00000000
+#define DDRSS_PI_114_DATA 0x00000000
+#define DDRSS_PI_115_DATA 0x00000000
+#define DDRSS_PI_116_DATA 0x00000000
+#define DDRSS_PI_117_DATA 0x00000000
+#define DDRSS_PI_118_DATA 0x00000000
+#define DDRSS_PI_119_DATA 0x00000000
+#define DDRSS_PI_120_DATA 0x00000000
+#define DDRSS_PI_121_DATA 0x00000000
+#define DDRSS_PI_122_DATA 0x00000000
+#define DDRSS_PI_123_DATA 0x00000000
+#define DDRSS_PI_124_DATA 0x00000008
+#define DDRSS_PI_125_DATA 0x00000000
+#define DDRSS_PI_126_DATA 0x00000000
+#define DDRSS_PI_127_DATA 0x00000000
+#define DDRSS_PI_128_DATA 0x00000000
+#define DDRSS_PI_129_DATA 0x00000000
+#define DDRSS_PI_130_DATA 0x00000000
+#define DDRSS_PI_131_DATA 0x00000000
+#define DDRSS_PI_132_DATA 0x00000000
+#define DDRSS_PI_133_DATA 0x00010000
+#define DDRSS_PI_134_DATA 0x00000000
+#define DDRSS_PI_135_DATA 0x00000000
+#define DDRSS_PI_136_DATA 0x0000000A
+#define DDRSS_PI_137_DATA 0x000186A0
+#define DDRSS_PI_138_DATA 0x00000100
+#define DDRSS_PI_139_DATA 0x00000000
+#define DDRSS_PI_140_DATA 0x00000000
+#define DDRSS_PI_141_DATA 0x00000000
+#define DDRSS_PI_142_DATA 0x00000000
+#define DDRSS_PI_143_DATA 0x00000000
+#define DDRSS_PI_144_DATA 0x01000000
+#define DDRSS_PI_145_DATA 0x00010003
+#define DDRSS_PI_146_DATA 0x02000101
+#define DDRSS_PI_147_DATA 0x01030001
+#define DDRSS_PI_148_DATA 0x00010400
+#define DDRSS_PI_149_DATA 0x06000105
+#define DDRSS_PI_150_DATA 0x01070001
+#define DDRSS_PI_151_DATA 0x00000000
+#define DDRSS_PI_152_DATA 0x00000000
+#define DDRSS_PI_153_DATA 0x00000000
+#define DDRSS_PI_154_DATA 0x00010001
+#define DDRSS_PI_155_DATA 0x00000000
+#define DDRSS_PI_156_DATA 0x00000000
+#define DDRSS_PI_157_DATA 0x00000000
+#define DDRSS_PI_158_DATA 0x00000000
+#define DDRSS_PI_159_DATA 0x00010000
+#define DDRSS_PI_160_DATA 0x00000004
+#define DDRSS_PI_161_DATA 0x00000000
+#define DDRSS_PI_162_DATA 0x00000000
+#define DDRSS_PI_163_DATA 0x00000000
+#define DDRSS_PI_164_DATA 0x00000800
+#define DDRSS_PI_165_DATA 0x00640064
+#define DDRSS_PI_166_DATA 0x000E0E01
+#define DDRSS_PI_167_DATA 0x00000034
+#define DDRSS_PI_168_DATA 0x00000042
+#define DDRSS_PI_169_DATA 0x00020042
+#define DDRSS_PI_170_DATA 0x02000200
+#define DDRSS_PI_171_DATA 0x00000004
+#define DDRSS_PI_172_DATA 0x0000080C
+#define DDRSS_PI_173_DATA 0x00081C00
+#define DDRSS_PI_174_DATA 0x001C0000
+#define DDRSS_PI_175_DATA 0x00000013
+#define DDRSS_PI_176_DATA 0x000000BB
+#define DDRSS_PI_177_DATA 0x000000FE
+#define DDRSS_PI_178_DATA 0x00000A20
+#define DDRSS_PI_179_DATA 0x000000FE
+#define DDRSS_PI_180_DATA 0x04000A20
+#define DDRSS_PI_181_DATA 0x01010404
+#define DDRSS_PI_182_DATA 0x00001501
+#define DDRSS_PI_183_DATA 0x001B001B
+#define DDRSS_PI_184_DATA 0x01000100
+#define DDRSS_PI_185_DATA 0x00000100
+#define DDRSS_PI_186_DATA 0x00000000
+#define DDRSS_PI_187_DATA 0x05050503
+#define DDRSS_PI_188_DATA 0x01010B0B
+#define DDRSS_PI_189_DATA 0x01010101
+#define DDRSS_PI_190_DATA 0x000C0C0A
+#define DDRSS_PI_191_DATA 0x00000000
+#define DDRSS_PI_192_DATA 0x00000000
+#define DDRSS_PI_193_DATA 0x04000000
+#define DDRSS_PI_194_DATA 0x04020909
+#define DDRSS_PI_195_DATA 0x04040204
+#define DDRSS_PI_196_DATA 0x00090031
+#define DDRSS_PI_197_DATA 0x000F0037
+#define DDRSS_PI_198_DATA 0x000F0037
+#define DDRSS_PI_199_DATA 0x01010101
+#define DDRSS_PI_200_DATA 0x0001000D
+#define DDRSS_PI_201_DATA 0x000100A7
+#define DDRSS_PI_202_DATA 0x010000A7
+#define DDRSS_PI_203_DATA 0x000E000E
+#define DDRSS_PI_204_DATA 0x00A80100
+#define DDRSS_PI_205_DATA 0x010000A8
+#define DDRSS_PI_206_DATA 0x00A800A8
+#define DDRSS_PI_207_DATA 0x32103200
+#define DDRSS_PI_208_DATA 0x01013210
+#define DDRSS_PI_209_DATA 0x0A070601
+#define DDRSS_PI_210_DATA 0x0B08070D
+#define DDRSS_PI_211_DATA 0x0B08070D
+#define DDRSS_PI_212_DATA 0x000C000D
+#define DDRSS_PI_213_DATA 0x00001000
+#define DDRSS_PI_214_DATA 0x00000C00
+#define DDRSS_PI_215_DATA 0x00001000
+#define DDRSS_PI_216_DATA 0x00000C00
+#define DDRSS_PI_217_DATA 0x02001000
+#define DDRSS_PI_218_DATA 0x0015000D
+#define DDRSS_PI_219_DATA 0x001500A7
+#define DDRSS_PI_220_DATA 0x000000A7
+#define DDRSS_PI_221_DATA 0x00001900
+#define DDRSS_PI_222_DATA 0x32000056
+#define DDRSS_PI_223_DATA 0x06000301
+#define DDRSS_PI_224_DATA 0x001D0204
+#define DDRSS_PI_225_DATA 0x32120059
+#define DDRSS_PI_226_DATA 0x05000301
+#define DDRSS_PI_227_DATA 0x001D0409
+#define DDRSS_PI_228_DATA 0x32120059
+#define DDRSS_PI_229_DATA 0x05000301
+#define DDRSS_PI_230_DATA 0x00000409
+#define DDRSS_PI_231_DATA 0x05030900
+#define DDRSS_PI_232_DATA 0x00040900
+#define DDRSS_PI_233_DATA 0x0000062B
+#define DDRSS_PI_234_DATA 0x20010004
+#define DDRSS_PI_235_DATA 0x0A0A0A03
+#define DDRSS_PI_236_DATA 0x0E090000
+#define DDRSS_PI_237_DATA 0x0E09000D
+#define DDRSS_PI_238_DATA 0x00005244
+#define DDRSS_PI_239_DATA 0x2003001D
+#define DDRSS_PI_240_DATA 0x0A0A0A0A
+#define DDRSS_PI_241_DATA 0x0E090000
+#define DDRSS_PI_242_DATA 0x0E09000D
+#define DDRSS_PI_243_DATA 0x00005244
+#define DDRSS_PI_244_DATA 0x2003001D
+#define DDRSS_PI_245_DATA 0x0A0A0A0A
+#define DDRSS_PI_246_DATA 0x00000000
+#define DDRSS_PI_247_DATA 0x00000176
+#define DDRSS_PI_248_DATA 0x00000E9C
+#define DDRSS_PI_249_DATA 0x00001440
+#define DDRSS_PI_250_DATA 0x0000CA80
+#define DDRSS_PI_251_DATA 0x00001440
+#define DDRSS_PI_252_DATA 0x0000CA80
+#define DDRSS_PI_253_DATA 0x01030014
+#define DDRSS_PI_254_DATA 0x03030103
+#define DDRSS_PI_255_DATA 0x00000003
+#define DDRSS_PI_256_DATA 0x00000000
+#define DDRSS_PI_257_DATA 0x05030503
+#define DDRSS_PI_258_DATA 0x00000503
+#define DDRSS_PI_259_DATA 0x00002710
+#define DDRSS_PI_260_DATA 0x000186A0
+#define DDRSS_PI_261_DATA 0x00000005
+#define DDRSS_PI_262_DATA 0x00000064
+#define DDRSS_PI_263_DATA 0x00000014
+#define DDRSS_PI_264_DATA 0x000208D6
+#define DDRSS_PI_265_DATA 0x000186A0
+#define DDRSS_PI_266_DATA 0x00000005
+#define DDRSS_PI_267_DATA 0x00000536
+#define DDRSS_PI_268_DATA 0x00000103
+#define DDRSS_PI_269_DATA 0x000208D6
+#define DDRSS_PI_270_DATA 0x000186A0
+#define DDRSS_PI_271_DATA 0x00000005
+#define DDRSS_PI_272_DATA 0x00000536
+#define DDRSS_PI_273_DATA 0x01000103
+#define DDRSS_PI_274_DATA 0x00320040
+#define DDRSS_PI_275_DATA 0x00010008
+#define DDRSS_PI_276_DATA 0x029B0040
+#define DDRSS_PI_277_DATA 0x00010014
+#define DDRSS_PI_278_DATA 0x029B0040
+#define DDRSS_PI_279_DATA 0x00000314
+#define DDRSS_PI_280_DATA 0x00280021
+#define DDRSS_PI_281_DATA 0x03040404
+#define DDRSS_PI_282_DATA 0x00000303
+#define DDRSS_PI_283_DATA 0x02020101
+#define DDRSS_PI_284_DATA 0x67676767
+#define DDRSS_PI_285_DATA 0x00000000
+#define DDRSS_PI_286_DATA 0x55000000
+#define DDRSS_PI_287_DATA 0x00000000
+#define DDRSS_PI_288_DATA 0x3C00005A
+#define DDRSS_PI_289_DATA 0x00005500
+#define DDRSS_PI_290_DATA 0x00005A00
+#define DDRSS_PI_291_DATA 0x0D100F3C
+#define DDRSS_PI_292_DATA 0x0003020E
+#define DDRSS_PI_293_DATA 0x00000001
+#define DDRSS_PI_294_DATA 0x01000000
+#define DDRSS_PI_295_DATA 0x00020201
+#define DDRSS_PI_296_DATA 0x00000000
+#define DDRSS_PI_297_DATA 0x00000000
+#define DDRSS_PI_298_DATA 0x00000004
+#define DDRSS_PI_299_DATA 0x00000000
+#define DDRSS_PI_300_DATA 0x00000031
+#define DDRSS_PI_301_DATA 0x00000000
+#define DDRSS_PI_302_DATA 0x00000000
+#define DDRSS_PI_303_DATA 0x00000000
+#define DDRSS_PI_304_DATA 0x00000F27
+#define DDRSS_PI_305_DATA 0x00000000
+#define DDRSS_PI_306_DATA 0x00000024
+#define DDRSS_PI_307_DATA 0x00000012
+#define DDRSS_PI_308_DATA 0x00000031
+#define DDRSS_PI_309_DATA 0x00000000
+#define DDRSS_PI_310_DATA 0x00000000
+#define DDRSS_PI_311_DATA 0x66000000
+#define DDRSS_PI_312_DATA 0x00150F27
+#define DDRSS_PI_313_DATA 0x00000000
+#define DDRSS_PI_314_DATA 0x00000024
+#define DDRSS_PI_315_DATA 0x00000012
+#define DDRSS_PI_316_DATA 0x00000031
+#define DDRSS_PI_317_DATA 0x00000000
+#define DDRSS_PI_318_DATA 0x00000000
+#define DDRSS_PI_319_DATA 0x66000000
+#define DDRSS_PI_320_DATA 0x00150F27
+#define DDRSS_PI_321_DATA 0x00000000
+#define DDRSS_PI_322_DATA 0x00000004
+#define DDRSS_PI_323_DATA 0x00000000
+#define DDRSS_PI_324_DATA 0x00000031
+#define DDRSS_PI_325_DATA 0x00000000
+#define DDRSS_PI_326_DATA 0x00000000
+#define DDRSS_PI_327_DATA 0x00000000
+#define DDRSS_PI_328_DATA 0x00000F27
+#define DDRSS_PI_329_DATA 0x00000000
+#define DDRSS_PI_330_DATA 0x00000024
+#define DDRSS_PI_331_DATA 0x00000012
+#define DDRSS_PI_332_DATA 0x00000031
+#define DDRSS_PI_333_DATA 0x00000000
+#define DDRSS_PI_334_DATA 0x00000000
+#define DDRSS_PI_335_DATA 0x66000000
+#define DDRSS_PI_336_DATA 0x00150F27
+#define DDRSS_PI_337_DATA 0x00000000
+#define DDRSS_PI_338_DATA 0x00000024
+#define DDRSS_PI_339_DATA 0x00000012
+#define DDRSS_PI_340_DATA 0x00000031
+#define DDRSS_PI_341_DATA 0x00000000
+#define DDRSS_PI_342_DATA 0x00000000
+#define DDRSS_PI_343_DATA 0x66000000
+#define DDRSS_PI_344_DATA 0x00150F27
+#define DDRSS_PHY_0_DATA 0x04F00000
+#define DDRSS_PHY_1_DATA 0x00000000
+#define DDRSS_PHY_2_DATA 0x00030200
+#define DDRSS_PHY_3_DATA 0x00000000
+#define DDRSS_PHY_4_DATA 0x00000000
+#define DDRSS_PHY_5_DATA 0x01000000
+#define DDRSS_PHY_6_DATA 0x03000400
+#define DDRSS_PHY_7_DATA 0x00000001
+#define DDRSS_PHY_8_DATA 0x00000001
+#define DDRSS_PHY_9_DATA 0x00000000
+#define DDRSS_PHY_10_DATA 0x00000000
+#define DDRSS_PHY_11_DATA 0x01010000
+#define DDRSS_PHY_12_DATA 0x00010000
+#define DDRSS_PHY_13_DATA 0x00C00001
+#define DDRSS_PHY_14_DATA 0x00CC0008
+#define DDRSS_PHY_15_DATA 0x00660601
+#define DDRSS_PHY_16_DATA 0x00000003
+#define DDRSS_PHY_17_DATA 0x00000000
+#define DDRSS_PHY_18_DATA 0x00000000
+#define DDRSS_PHY_19_DATA 0x0000AAAA
+#define DDRSS_PHY_20_DATA 0x00005555
+#define DDRSS_PHY_21_DATA 0x0000B5B5
+#define DDRSS_PHY_22_DATA 0x00004A4A
+#define DDRSS_PHY_23_DATA 0x00005656
+#define DDRSS_PHY_24_DATA 0x0000A9A9
+#define DDRSS_PHY_25_DATA 0x0000B7B7
+#define DDRSS_PHY_26_DATA 0x00004848
+#define DDRSS_PHY_27_DATA 0x00000000
+#define DDRSS_PHY_28_DATA 0x00000000
+#define DDRSS_PHY_29_DATA 0x08000000
+#define DDRSS_PHY_30_DATA 0x0F000008
+#define DDRSS_PHY_31_DATA 0x00000F0F
+#define DDRSS_PHY_32_DATA 0x00E4E400
+#define DDRSS_PHY_33_DATA 0x00071020
+#define DDRSS_PHY_34_DATA 0x000C0020
+#define DDRSS_PHY_35_DATA 0x00062000
+#define DDRSS_PHY_36_DATA 0x00000000
+#define DDRSS_PHY_37_DATA 0x55555555
+#define DDRSS_PHY_38_DATA 0xAAAAAAAA
+#define DDRSS_PHY_39_DATA 0x55555555
+#define DDRSS_PHY_40_DATA 0xAAAAAAAA
+#define DDRSS_PHY_41_DATA 0x00005555
+#define DDRSS_PHY_42_DATA 0x01000100
+#define DDRSS_PHY_43_DATA 0x00800180
+#define DDRSS_PHY_44_DATA 0x00000001
+#define DDRSS_PHY_45_DATA 0x00000000
+#define DDRSS_PHY_46_DATA 0x00000000
+#define DDRSS_PHY_47_DATA 0x00000000
+#define DDRSS_PHY_48_DATA 0x00000000
+#define DDRSS_PHY_49_DATA 0x00000000
+#define DDRSS_PHY_50_DATA 0x00000000
+#define DDRSS_PHY_51_DATA 0x00000000
+#define DDRSS_PHY_52_DATA 0x00000000
+#define DDRSS_PHY_53_DATA 0x00000000
+#define DDRSS_PHY_54_DATA 0x00000000
+#define DDRSS_PHY_55_DATA 0x00000000
+#define DDRSS_PHY_56_DATA 0x00000000
+#define DDRSS_PHY_57_DATA 0x00000000
+#define DDRSS_PHY_58_DATA 0x00000000
+#define DDRSS_PHY_59_DATA 0x00000000
+#define DDRSS_PHY_60_DATA 0x00000000
+#define DDRSS_PHY_61_DATA 0x00000000
+#define DDRSS_PHY_62_DATA 0x00000000
+#define DDRSS_PHY_63_DATA 0x00000000
+#define DDRSS_PHY_64_DATA 0x00000000
+#define DDRSS_PHY_65_DATA 0x00000004
+#define DDRSS_PHY_66_DATA 0x00000000
+#define DDRSS_PHY_67_DATA 0x00000000
+#define DDRSS_PHY_68_DATA 0x00000000
+#define DDRSS_PHY_69_DATA 0x00000000
+#define DDRSS_PHY_70_DATA 0x00000000
+#define DDRSS_PHY_71_DATA 0x00000000
+#define DDRSS_PHY_72_DATA 0x041F07FF
+#define DDRSS_PHY_73_DATA 0x00000000
+#define DDRSS_PHY_74_DATA 0x01CC0B01
+#define DDRSS_PHY_75_DATA 0x1003CC0B
+#define DDRSS_PHY_76_DATA 0x20000140
+#define DDRSS_PHY_77_DATA 0x07FF0200
+#define DDRSS_PHY_78_DATA 0x0000DD01
+#define DDRSS_PHY_79_DATA 0x00100303
+#define DDRSS_PHY_80_DATA 0x00000000
+#define DDRSS_PHY_81_DATA 0x00000000
+#define DDRSS_PHY_82_DATA 0x00021000
+#define DDRSS_PHY_83_DATA 0x00100010
+#define DDRSS_PHY_84_DATA 0x00100010
+#define DDRSS_PHY_85_DATA 0x00100010
+#define DDRSS_PHY_86_DATA 0x00100010
+#define DDRSS_PHY_87_DATA 0x02000010
+#define DDRSS_PHY_88_DATA 0x51516041
+#define DDRSS_PHY_89_DATA 0x31C06000
+#define DDRSS_PHY_90_DATA 0x07AB0340
+#define DDRSS_PHY_91_DATA 0x0100C0C0
+#define DDRSS_PHY_92_DATA 0x03040000
+#define DDRSS_PHY_93_DATA 0x00000403
+#define DDRSS_PHY_94_DATA 0x42100010
+#define DDRSS_PHY_95_DATA 0x010C053E
+#define DDRSS_PHY_96_DATA 0x000F0C1A
+#define DDRSS_PHY_97_DATA 0x01000140
+#define DDRSS_PHY_98_DATA 0x00660120
+#define DDRSS_PHY_99_DATA 0x00000C00
+#define DDRSS_PHY_100_DATA 0x000001AA
+#define DDRSS_PHY_101_DATA 0x20100200
+#define DDRSS_PHY_102_DATA 0x00000004
+#define DDRSS_PHY_103_DATA 0x76543210
+#define DDRSS_PHY_104_DATA 0x00000008
+#define DDRSS_PHY_105_DATA 0x032A032A
+#define DDRSS_PHY_106_DATA 0x032A032A
+#define DDRSS_PHY_107_DATA 0x032A032A
+#define DDRSS_PHY_108_DATA 0x032A032A
+#define DDRSS_PHY_109_DATA 0x0000032A
+#define DDRSS_PHY_110_DATA 0x00008000
+#define DDRSS_PHY_111_DATA 0x00800080
+#define DDRSS_PHY_112_DATA 0x00800080
+#define DDRSS_PHY_113_DATA 0x00800080
+#define DDRSS_PHY_114_DATA 0x00800080
+#define DDRSS_PHY_115_DATA 0x00800080
+#define DDRSS_PHY_116_DATA 0x00800080
+#define DDRSS_PHY_117_DATA 0x00800080
+#define DDRSS_PHY_118_DATA 0x00800080
+#define DDRSS_PHY_119_DATA 0x01190080
+#define DDRSS_PHY_120_DATA 0x01A00001
+#define DDRSS_PHY_121_DATA 0x00000000
+#define DDRSS_PHY_122_DATA 0x00000000
+#define DDRSS_PHY_123_DATA 0x00080200
+#define DDRSS_PHY_124_DATA 0x00000000
+#define DDRSS_PHY_125_DATA 0x0000F0F0
+#define DDRSS_PHY_126_DATA 0x00000000
+#define DDRSS_PHY_127_DATA 0x00000000
+#define DDRSS_PHY_128_DATA 0x00000000
+#define DDRSS_PHY_129_DATA 0x00000000
+#define DDRSS_PHY_130_DATA 0x00000000
+#define DDRSS_PHY_131_DATA 0x00000000
+#define DDRSS_PHY_132_DATA 0x00000000
+#define DDRSS_PHY_133_DATA 0x00000000
+#define DDRSS_PHY_134_DATA 0x00000000
+#define DDRSS_PHY_135_DATA 0x00000000
+#define DDRSS_PHY_136_DATA 0x00000000
+#define DDRSS_PHY_137_DATA 0x00000000
+#define DDRSS_PHY_138_DATA 0x00000000
+#define DDRSS_PHY_139_DATA 0x00000000
+#define DDRSS_PHY_140_DATA 0x00000000
+#define DDRSS_PHY_141_DATA 0x00000000
+#define DDRSS_PHY_142_DATA 0x00000000
+#define DDRSS_PHY_143_DATA 0x00000000
+#define DDRSS_PHY_144_DATA 0x00000000
+#define DDRSS_PHY_145_DATA 0x00000000
+#define DDRSS_PHY_146_DATA 0x00000000
+#define DDRSS_PHY_147_DATA 0x00000000
+#define DDRSS_PHY_148_DATA 0x00000000
+#define DDRSS_PHY_149_DATA 0x00000000
+#define DDRSS_PHY_150_DATA 0x00000000
+#define DDRSS_PHY_151_DATA 0x00000000
+#define DDRSS_PHY_152_DATA 0x00000000
+#define DDRSS_PHY_153_DATA 0x00000000
+#define DDRSS_PHY_154_DATA 0x00000000
+#define DDRSS_PHY_155_DATA 0x00000000
+#define DDRSS_PHY_156_DATA 0x00000000
+#define DDRSS_PHY_157_DATA 0x00000000
+#define DDRSS_PHY_158_DATA 0x00000000
+#define DDRSS_PHY_159_DATA 0x00000000
+#define DDRSS_PHY_160_DATA 0x00000000
+#define DDRSS_PHY_161_DATA 0x00000000
+#define DDRSS_PHY_162_DATA 0x00000000
+#define DDRSS_PHY_163_DATA 0x00000000
+#define DDRSS_PHY_164_DATA 0x00000000
+#define DDRSS_PHY_165_DATA 0x00000000
+#define DDRSS_PHY_166_DATA 0x00000000
+#define DDRSS_PHY_167_DATA 0x00000000
+#define DDRSS_PHY_168_DATA 0x00000000
+#define DDRSS_PHY_169_DATA 0x00000000
+#define DDRSS_PHY_170_DATA 0x00000000
+#define DDRSS_PHY_171_DATA 0x00000000
+#define DDRSS_PHY_172_DATA 0x00000000
+#define DDRSS_PHY_173_DATA 0x00000000
+#define DDRSS_PHY_174_DATA 0x00000000
+#define DDRSS_PHY_175_DATA 0x00000000
+#define DDRSS_PHY_176_DATA 0x00000000
+#define DDRSS_PHY_177_DATA 0x00000000
+#define DDRSS_PHY_178_DATA 0x00000000
+#define DDRSS_PHY_179_DATA 0x00000000
+#define DDRSS_PHY_180_DATA 0x00000000
+#define DDRSS_PHY_181_DATA 0x00000000
+#define DDRSS_PHY_182_DATA 0x00000000
+#define DDRSS_PHY_183_DATA 0x00000000
+#define DDRSS_PHY_184_DATA 0x00000000
+#define DDRSS_PHY_185_DATA 0x00000000
+#define DDRSS_PHY_186_DATA 0x00000000
+#define DDRSS_PHY_187_DATA 0x00000000
+#define DDRSS_PHY_188_DATA 0x00000000
+#define DDRSS_PHY_189_DATA 0x00000000
+#define DDRSS_PHY_190_DATA 0x00000000
+#define DDRSS_PHY_191_DATA 0x00000000
+#define DDRSS_PHY_192_DATA 0x00000000
+#define DDRSS_PHY_193_DATA 0x00000000
+#define DDRSS_PHY_194_DATA 0x00000000
+#define DDRSS_PHY_195_DATA 0x00000000
+#define DDRSS_PHY_196_DATA 0x00000000
+#define DDRSS_PHY_197_DATA 0x00000000
+#define DDRSS_PHY_198_DATA 0x00000000
+#define DDRSS_PHY_199_DATA 0x00000000
+#define DDRSS_PHY_200_DATA 0x00000000
+#define DDRSS_PHY_201_DATA 0x00000000
+#define DDRSS_PHY_202_DATA 0x00000000
+#define DDRSS_PHY_203_DATA 0x00000000
+#define DDRSS_PHY_204_DATA 0x00000000
+#define DDRSS_PHY_205_DATA 0x00000000
+#define DDRSS_PHY_206_DATA 0x00000000
+#define DDRSS_PHY_207_DATA 0x00000000
+#define DDRSS_PHY_208_DATA 0x00000000
+#define DDRSS_PHY_209_DATA 0x00000000
+#define DDRSS_PHY_210_DATA 0x00000000
+#define DDRSS_PHY_211_DATA 0x00000000
+#define DDRSS_PHY_212_DATA 0x00000000
+#define DDRSS_PHY_213_DATA 0x00000000
+#define DDRSS_PHY_214_DATA 0x00000000
+#define DDRSS_PHY_215_DATA 0x00000000
+#define DDRSS_PHY_216_DATA 0x00000000
+#define DDRSS_PHY_217_DATA 0x00000000
+#define DDRSS_PHY_218_DATA 0x00000000
+#define DDRSS_PHY_219_DATA 0x00000000
+#define DDRSS_PHY_220_DATA 0x00000000
+#define DDRSS_PHY_221_DATA 0x00000000
+#define DDRSS_PHY_222_DATA 0x00000000
+#define DDRSS_PHY_223_DATA 0x00000000
+#define DDRSS_PHY_224_DATA 0x00000000
+#define DDRSS_PHY_225_DATA 0x00000000
+#define DDRSS_PHY_226_DATA 0x00000000
+#define DDRSS_PHY_227_DATA 0x00000000
+#define DDRSS_PHY_228_DATA 0x00000000
+#define DDRSS_PHY_229_DATA 0x00000000
+#define DDRSS_PHY_230_DATA 0x00000000
+#define DDRSS_PHY_231_DATA 0x00000000
+#define DDRSS_PHY_232_DATA 0x00000000
+#define DDRSS_PHY_233_DATA 0x00000000
+#define DDRSS_PHY_234_DATA 0x00000000
+#define DDRSS_PHY_235_DATA 0x00000000
+#define DDRSS_PHY_236_DATA 0x00000000
+#define DDRSS_PHY_237_DATA 0x00000000
+#define DDRSS_PHY_238_DATA 0x00000000
+#define DDRSS_PHY_239_DATA 0x00000000
+#define DDRSS_PHY_240_DATA 0x00000000
+#define DDRSS_PHY_241_DATA 0x00000000
+#define DDRSS_PHY_242_DATA 0x00000000
+#define DDRSS_PHY_243_DATA 0x00000000
+#define DDRSS_PHY_244_DATA 0x00000000
+#define DDRSS_PHY_245_DATA 0x00000000
+#define DDRSS_PHY_246_DATA 0x00000000
+#define DDRSS_PHY_247_DATA 0x00000000
+#define DDRSS_PHY_248_DATA 0x00000000
+#define DDRSS_PHY_249_DATA 0x00000000
+#define DDRSS_PHY_250_DATA 0x00000000
+#define DDRSS_PHY_251_DATA 0x00000000
+#define DDRSS_PHY_252_DATA 0x00000000
+#define DDRSS_PHY_253_DATA 0x00000000
+#define DDRSS_PHY_254_DATA 0x00000000
+#define DDRSS_PHY_255_DATA 0x00000000
+#define DDRSS_PHY_256_DATA 0x04F00000
+#define DDRSS_PHY_257_DATA 0x00000000
+#define DDRSS_PHY_258_DATA 0x00030200
+#define DDRSS_PHY_259_DATA 0x00000000
+#define DDRSS_PHY_260_DATA 0x00000000
+#define DDRSS_PHY_261_DATA 0x01000000
+#define DDRSS_PHY_262_DATA 0x03000400
+#define DDRSS_PHY_263_DATA 0x00000001
+#define DDRSS_PHY_264_DATA 0x00000001
+#define DDRSS_PHY_265_DATA 0x00000000
+#define DDRSS_PHY_266_DATA 0x00000000
+#define DDRSS_PHY_267_DATA 0x01010000
+#define DDRSS_PHY_268_DATA 0x00010000
+#define DDRSS_PHY_269_DATA 0x00C00001
+#define DDRSS_PHY_270_DATA 0x00CC0008
+#define DDRSS_PHY_271_DATA 0x00660601
+#define DDRSS_PHY_272_DATA 0x00000003
+#define DDRSS_PHY_273_DATA 0x00000000
+#define DDRSS_PHY_274_DATA 0x00000000
+#define DDRSS_PHY_275_DATA 0x0000AAAA
+#define DDRSS_PHY_276_DATA 0x00005555
+#define DDRSS_PHY_277_DATA 0x0000B5B5
+#define DDRSS_PHY_278_DATA 0x00004A4A
+#define DDRSS_PHY_279_DATA 0x00005656
+#define DDRSS_PHY_280_DATA 0x0000A9A9
+#define DDRSS_PHY_281_DATA 0x0000B7B7
+#define DDRSS_PHY_282_DATA 0x00004848
+#define DDRSS_PHY_283_DATA 0x00000000
+#define DDRSS_PHY_284_DATA 0x00000000
+#define DDRSS_PHY_285_DATA 0x08000000
+#define DDRSS_PHY_286_DATA 0x0F000008
+#define DDRSS_PHY_287_DATA 0x00000F0F
+#define DDRSS_PHY_288_DATA 0x00E4E400
+#define DDRSS_PHY_289_DATA 0x00071020
+#define DDRSS_PHY_290_DATA 0x000C0020
+#define DDRSS_PHY_291_DATA 0x00062000
+#define DDRSS_PHY_292_DATA 0x00000000
+#define DDRSS_PHY_293_DATA 0x55555555
+#define DDRSS_PHY_294_DATA 0xAAAAAAAA
+#define DDRSS_PHY_295_DATA 0x55555555
+#define DDRSS_PHY_296_DATA 0xAAAAAAAA
+#define DDRSS_PHY_297_DATA 0x00005555
+#define DDRSS_PHY_298_DATA 0x01000100
+#define DDRSS_PHY_299_DATA 0x00800180
+#define DDRSS_PHY_300_DATA 0x00000000
+#define DDRSS_PHY_301_DATA 0x00000000
+#define DDRSS_PHY_302_DATA 0x00000000
+#define DDRSS_PHY_303_DATA 0x00000000
+#define DDRSS_PHY_304_DATA 0x00000000
+#define DDRSS_PHY_305_DATA 0x00000000
+#define DDRSS_PHY_306_DATA 0x00000000
+#define DDRSS_PHY_307_DATA 0x00000000
+#define DDRSS_PHY_308_DATA 0x00000000
+#define DDRSS_PHY_309_DATA 0x00000000
+#define DDRSS_PHY_310_DATA 0x00000000
+#define DDRSS_PHY_311_DATA 0x00000000
+#define DDRSS_PHY_312_DATA 0x00000000
+#define DDRSS_PHY_313_DATA 0x00000000
+#define DDRSS_PHY_314_DATA 0x00000000
+#define DDRSS_PHY_315_DATA 0x00000000
+#define DDRSS_PHY_316_DATA 0x00000000
+#define DDRSS_PHY_317_DATA 0x00000000
+#define DDRSS_PHY_318_DATA 0x00000000
+#define DDRSS_PHY_319_DATA 0x00000000
+#define DDRSS_PHY_320_DATA 0x00000000
+#define DDRSS_PHY_321_DATA 0x00000004
+#define DDRSS_PHY_322_DATA 0x00000000
+#define DDRSS_PHY_323_DATA 0x00000000
+#define DDRSS_PHY_324_DATA 0x00000000
+#define DDRSS_PHY_325_DATA 0x00000000
+#define DDRSS_PHY_326_DATA 0x00000000
+#define DDRSS_PHY_327_DATA 0x00000000
+#define DDRSS_PHY_328_DATA 0x041F07FF
+#define DDRSS_PHY_329_DATA 0x00000000
+#define DDRSS_PHY_330_DATA 0x01CC0B01
+#define DDRSS_PHY_331_DATA 0x1003CC0B
+#define DDRSS_PHY_332_DATA 0x20000140
+#define DDRSS_PHY_333_DATA 0x07FF0200
+#define DDRSS_PHY_334_DATA 0x0000DD01
+#define DDRSS_PHY_335_DATA 0x00100303
+#define DDRSS_PHY_336_DATA 0x00000000
+#define DDRSS_PHY_337_DATA 0x00000000
+#define DDRSS_PHY_338_DATA 0x00021000
+#define DDRSS_PHY_339_DATA 0x00100010
+#define DDRSS_PHY_340_DATA 0x00100010
+#define DDRSS_PHY_341_DATA 0x00100010
+#define DDRSS_PHY_342_DATA 0x00100010
+#define DDRSS_PHY_343_DATA 0x02000010
+#define DDRSS_PHY_344_DATA 0x51516041
+#define DDRSS_PHY_345_DATA 0x31C06000
+#define DDRSS_PHY_346_DATA 0x07AB0340
+#define DDRSS_PHY_347_DATA 0x0100C0C0
+#define DDRSS_PHY_348_DATA 0x03040000
+#define DDRSS_PHY_349_DATA 0x00000403
+#define DDRSS_PHY_350_DATA 0x42100010
+#define DDRSS_PHY_351_DATA 0x010C053E
+#define DDRSS_PHY_352_DATA 0x000F0C1A
+#define DDRSS_PHY_353_DATA 0x01000140
+#define DDRSS_PHY_354_DATA 0x00660120
+#define DDRSS_PHY_355_DATA 0x00000C00
+#define DDRSS_PHY_356_DATA 0x000001AA
+#define DDRSS_PHY_357_DATA 0x20100200
+#define DDRSS_PHY_358_DATA 0x00000004
+#define DDRSS_PHY_359_DATA 0x76543210
+#define DDRSS_PHY_360_DATA 0x00000008
+#define DDRSS_PHY_361_DATA 0x032A032A
+#define DDRSS_PHY_362_DATA 0x032A032A
+#define DDRSS_PHY_363_DATA 0x032A032A
+#define DDRSS_PHY_364_DATA 0x032A032A
+#define DDRSS_PHY_365_DATA 0x0000032A
+#define DDRSS_PHY_366_DATA 0x00008000
+#define DDRSS_PHY_367_DATA 0x00800080
+#define DDRSS_PHY_368_DATA 0x00800080
+#define DDRSS_PHY_369_DATA 0x00800080
+#define DDRSS_PHY_370_DATA 0x00800080
+#define DDRSS_PHY_371_DATA 0x00800080
+#define DDRSS_PHY_372_DATA 0x00800080
+#define DDRSS_PHY_373_DATA 0x00800080
+#define DDRSS_PHY_374_DATA 0x00800080
+#define DDRSS_PHY_375_DATA 0x01190080
+#define DDRSS_PHY_376_DATA 0x01A00001
+#define DDRSS_PHY_377_DATA 0x00000000
+#define DDRSS_PHY_378_DATA 0x00000000
+#define DDRSS_PHY_379_DATA 0x00080200
+#define DDRSS_PHY_380_DATA 0x00000000
+#define DDRSS_PHY_381_DATA 0x0000F0F0
+#define DDRSS_PHY_382_DATA 0x00000000
+#define DDRSS_PHY_383_DATA 0x00000000
+#define DDRSS_PHY_384_DATA 0x00000000
+#define DDRSS_PHY_385_DATA 0x00000000
+#define DDRSS_PHY_386_DATA 0x00000000
+#define DDRSS_PHY_387_DATA 0x00000000
+#define DDRSS_PHY_388_DATA 0x00000000
+#define DDRSS_PHY_389_DATA 0x00000000
+#define DDRSS_PHY_390_DATA 0x00000000
+#define DDRSS_PHY_391_DATA 0x00000000
+#define DDRSS_PHY_392_DATA 0x00000000
+#define DDRSS_PHY_393_DATA 0x00000000
+#define DDRSS_PHY_394_DATA 0x00000000
+#define DDRSS_PHY_395_DATA 0x00000000
+#define DDRSS_PHY_396_DATA 0x00000000
+#define DDRSS_PHY_397_DATA 0x00000000
+#define DDRSS_PHY_398_DATA 0x00000000
+#define DDRSS_PHY_399_DATA 0x00000000
+#define DDRSS_PHY_400_DATA 0x00000000
+#define DDRSS_PHY_401_DATA 0x00000000
+#define DDRSS_PHY_402_DATA 0x00000000
+#define DDRSS_PHY_403_DATA 0x00000000
+#define DDRSS_PHY_404_DATA 0x00000000
+#define DDRSS_PHY_405_DATA 0x00000000
+#define DDRSS_PHY_406_DATA 0x00000000
+#define DDRSS_PHY_407_DATA 0x00000000
+#define DDRSS_PHY_408_DATA 0x00000000
+#define DDRSS_PHY_409_DATA 0x00000000
+#define DDRSS_PHY_410_DATA 0x00000000
+#define DDRSS_PHY_411_DATA 0x00000000
+#define DDRSS_PHY_412_DATA 0x00000000
+#define DDRSS_PHY_413_DATA 0x00000000
+#define DDRSS_PHY_414_DATA 0x00000000
+#define DDRSS_PHY_415_DATA 0x00000000
+#define DDRSS_PHY_416_DATA 0x00000000
+#define DDRSS_PHY_417_DATA 0x00000000
+#define DDRSS_PHY_418_DATA 0x00000000
+#define DDRSS_PHY_419_DATA 0x00000000
+#define DDRSS_PHY_420_DATA 0x00000000
+#define DDRSS_PHY_421_DATA 0x00000000
+#define DDRSS_PHY_422_DATA 0x00000000
+#define DDRSS_PHY_423_DATA 0x00000000
+#define DDRSS_PHY_424_DATA 0x00000000
+#define DDRSS_PHY_425_DATA 0x00000000
+#define DDRSS_PHY_426_DATA 0x00000000
+#define DDRSS_PHY_427_DATA 0x00000000
+#define DDRSS_PHY_428_DATA 0x00000000
+#define DDRSS_PHY_429_DATA 0x00000000
+#define DDRSS_PHY_430_DATA 0x00000000
+#define DDRSS_PHY_431_DATA 0x00000000
+#define DDRSS_PHY_432_DATA 0x00000000
+#define DDRSS_PHY_433_DATA 0x00000000
+#define DDRSS_PHY_434_DATA 0x00000000
+#define DDRSS_PHY_435_DATA 0x00000000
+#define DDRSS_PHY_436_DATA 0x00000000
+#define DDRSS_PHY_437_DATA 0x00000000
+#define DDRSS_PHY_438_DATA 0x00000000
+#define DDRSS_PHY_439_DATA 0x00000000
+#define DDRSS_PHY_440_DATA 0x00000000
+#define DDRSS_PHY_441_DATA 0x00000000
+#define DDRSS_PHY_442_DATA 0x00000000
+#define DDRSS_PHY_443_DATA 0x00000000
+#define DDRSS_PHY_444_DATA 0x00000000
+#define DDRSS_PHY_445_DATA 0x00000000
+#define DDRSS_PHY_446_DATA 0x00000000
+#define DDRSS_PHY_447_DATA 0x00000000
+#define DDRSS_PHY_448_DATA 0x00000000
+#define DDRSS_PHY_449_DATA 0x00000000
+#define DDRSS_PHY_450_DATA 0x00000000
+#define DDRSS_PHY_451_DATA 0x00000000
+#define DDRSS_PHY_452_DATA 0x00000000
+#define DDRSS_PHY_453_DATA 0x00000000
+#define DDRSS_PHY_454_DATA 0x00000000
+#define DDRSS_PHY_455_DATA 0x00000000
+#define DDRSS_PHY_456_DATA 0x00000000
+#define DDRSS_PHY_457_DATA 0x00000000
+#define DDRSS_PHY_458_DATA 0x00000000
+#define DDRSS_PHY_459_DATA 0x00000000
+#define DDRSS_PHY_460_DATA 0x00000000
+#define DDRSS_PHY_461_DATA 0x00000000
+#define DDRSS_PHY_462_DATA 0x00000000
+#define DDRSS_PHY_463_DATA 0x00000000
+#define DDRSS_PHY_464_DATA 0x00000000
+#define DDRSS_PHY_465_DATA 0x00000000
+#define DDRSS_PHY_466_DATA 0x00000000
+#define DDRSS_PHY_467_DATA 0x00000000
+#define DDRSS_PHY_468_DATA 0x00000000
+#define DDRSS_PHY_469_DATA 0x00000000
+#define DDRSS_PHY_470_DATA 0x00000000
+#define DDRSS_PHY_471_DATA 0x00000000
+#define DDRSS_PHY_472_DATA 0x00000000
+#define DDRSS_PHY_473_DATA 0x00000000
+#define DDRSS_PHY_474_DATA 0x00000000
+#define DDRSS_PHY_475_DATA 0x00000000
+#define DDRSS_PHY_476_DATA 0x00000000
+#define DDRSS_PHY_477_DATA 0x00000000
+#define DDRSS_PHY_478_DATA 0x00000000
+#define DDRSS_PHY_479_DATA 0x00000000
+#define DDRSS_PHY_480_DATA 0x00000000
+#define DDRSS_PHY_481_DATA 0x00000000
+#define DDRSS_PHY_482_DATA 0x00000000
+#define DDRSS_PHY_483_DATA 0x00000000
+#define DDRSS_PHY_484_DATA 0x00000000
+#define DDRSS_PHY_485_DATA 0x00000000
+#define DDRSS_PHY_486_DATA 0x00000000
+#define DDRSS_PHY_487_DATA 0x00000000
+#define DDRSS_PHY_488_DATA 0x00000000
+#define DDRSS_PHY_489_DATA 0x00000000
+#define DDRSS_PHY_490_DATA 0x00000000
+#define DDRSS_PHY_491_DATA 0x00000000
+#define DDRSS_PHY_492_DATA 0x00000000
+#define DDRSS_PHY_493_DATA 0x00000000
+#define DDRSS_PHY_494_DATA 0x00000000
+#define DDRSS_PHY_495_DATA 0x00000000
+#define DDRSS_PHY_496_DATA 0x00000000
+#define DDRSS_PHY_497_DATA 0x00000000
+#define DDRSS_PHY_498_DATA 0x00000000
+#define DDRSS_PHY_499_DATA 0x00000000
+#define DDRSS_PHY_500_DATA 0x00000000
+#define DDRSS_PHY_501_DATA 0x00000000
+#define DDRSS_PHY_502_DATA 0x00000000
+#define DDRSS_PHY_503_DATA 0x00000000
+#define DDRSS_PHY_504_DATA 0x00000000
+#define DDRSS_PHY_505_DATA 0x00000000
+#define DDRSS_PHY_506_DATA 0x00000000
+#define DDRSS_PHY_507_DATA 0x00000000
+#define DDRSS_PHY_508_DATA 0x00000000
+#define DDRSS_PHY_509_DATA 0x00000000
+#define DDRSS_PHY_510_DATA 0x00000000
+#define DDRSS_PHY_511_DATA 0x00000000
+#define DDRSS_PHY_512_DATA 0x00000000
+#define DDRSS_PHY_513_DATA 0x00000000
+#define DDRSS_PHY_514_DATA 0x00000000
+#define DDRSS_PHY_515_DATA 0x00000000
+#define DDRSS_PHY_516_DATA 0x00000000
+#define DDRSS_PHY_517_DATA 0x00000100
+#define DDRSS_PHY_518_DATA 0x00000200
+#define DDRSS_PHY_519_DATA 0x00000000
+#define DDRSS_PHY_520_DATA 0x00000000
+#define DDRSS_PHY_521_DATA 0x00000000
+#define DDRSS_PHY_522_DATA 0x00000000
+#define DDRSS_PHY_523_DATA 0x00400000
+#define DDRSS_PHY_524_DATA 0x00000080
+#define DDRSS_PHY_525_DATA 0x00DCBA98
+#define DDRSS_PHY_526_DATA 0x03000000
+#define DDRSS_PHY_527_DATA 0x00200000
+#define DDRSS_PHY_528_DATA 0x00000000
+#define DDRSS_PHY_529_DATA 0x00000000
+#define DDRSS_PHY_530_DATA 0x00000000
+#define DDRSS_PHY_531_DATA 0x00000000
+#define DDRSS_PHY_532_DATA 0x0000002A
+#define DDRSS_PHY_533_DATA 0x00000015
+#define DDRSS_PHY_534_DATA 0x00000015
+#define DDRSS_PHY_535_DATA 0x0000002A
+#define DDRSS_PHY_536_DATA 0x00000033
+#define DDRSS_PHY_537_DATA 0x0000000C
+#define DDRSS_PHY_538_DATA 0x0000000C
+#define DDRSS_PHY_539_DATA 0x00000033
+#define DDRSS_PHY_540_DATA 0x0A418820
+#define DDRSS_PHY_541_DATA 0x003F0000
+#define DDRSS_PHY_542_DATA 0x000F013F
+#define DDRSS_PHY_543_DATA 0x0000000F
+#define DDRSS_PHY_544_DATA 0x000002CC
+#define DDRSS_PHY_545_DATA 0x00030000
+#define DDRSS_PHY_546_DATA 0x00000300
+#define DDRSS_PHY_547_DATA 0x00000300
+#define DDRSS_PHY_548_DATA 0x00000300
+#define DDRSS_PHY_549_DATA 0x00000300
+#define DDRSS_PHY_550_DATA 0x00000300
+#define DDRSS_PHY_551_DATA 0x42080010
+#define DDRSS_PHY_552_DATA 0x0000803E
+#define DDRSS_PHY_553_DATA 0x00000003
+#define DDRSS_PHY_554_DATA 0x00000002
+#define DDRSS_PHY_555_DATA 0x00000000
+#define DDRSS_PHY_556_DATA 0x00000000
+#define DDRSS_PHY_557_DATA 0x00000000
+#define DDRSS_PHY_558_DATA 0x00000000
+#define DDRSS_PHY_559_DATA 0x00000000
+#define DDRSS_PHY_560_DATA 0x00000000
+#define DDRSS_PHY_561_DATA 0x00000000
+#define DDRSS_PHY_562_DATA 0x00000000
+#define DDRSS_PHY_563_DATA 0x00000000
+#define DDRSS_PHY_564_DATA 0x00000000
+#define DDRSS_PHY_565_DATA 0x00000000
+#define DDRSS_PHY_566_DATA 0x00000000
+#define DDRSS_PHY_567_DATA 0x00000000
+#define DDRSS_PHY_568_DATA 0x00000000
+#define DDRSS_PHY_569_DATA 0x00000000
+#define DDRSS_PHY_570_DATA 0x00000000
+#define DDRSS_PHY_571_DATA 0x00000000
+#define DDRSS_PHY_572_DATA 0x00000000
+#define DDRSS_PHY_573_DATA 0x00000000
+#define DDRSS_PHY_574_DATA 0x00000000
+#define DDRSS_PHY_575_DATA 0x00000000
+#define DDRSS_PHY_576_DATA 0x00000000
+#define DDRSS_PHY_577_DATA 0x00000000
+#define DDRSS_PHY_578_DATA 0x00000000
+#define DDRSS_PHY_579_DATA 0x00000000
+#define DDRSS_PHY_580_DATA 0x00000000
+#define DDRSS_PHY_581_DATA 0x00000000
+#define DDRSS_PHY_582_DATA 0x00000000
+#define DDRSS_PHY_583_DATA 0x00000000
+#define DDRSS_PHY_584_DATA 0x00000000
+#define DDRSS_PHY_585_DATA 0x00000000
+#define DDRSS_PHY_586_DATA 0x00000000
+#define DDRSS_PHY_587_DATA 0x00000000
+#define DDRSS_PHY_588_DATA 0x00000000
+#define DDRSS_PHY_589_DATA 0x00000000
+#define DDRSS_PHY_590_DATA 0x00000000
+#define DDRSS_PHY_591_DATA 0x00000000
+#define DDRSS_PHY_592_DATA 0x00000000
+#define DDRSS_PHY_593_DATA 0x00000000
+#define DDRSS_PHY_594_DATA 0x00000000
+#define DDRSS_PHY_595_DATA 0x00000000
+#define DDRSS_PHY_596_DATA 0x00000000
+#define DDRSS_PHY_597_DATA 0x00000000
+#define DDRSS_PHY_598_DATA 0x00000000
+#define DDRSS_PHY_599_DATA 0x00000000
+#define DDRSS_PHY_600_DATA 0x00000000
+#define DDRSS_PHY_601_DATA 0x00000000
+#define DDRSS_PHY_602_DATA 0x00000000
+#define DDRSS_PHY_603_DATA 0x00000000
+#define DDRSS_PHY_604_DATA 0x00000000
+#define DDRSS_PHY_605_DATA 0x00000000
+#define DDRSS_PHY_606_DATA 0x00000000
+#define DDRSS_PHY_607_DATA 0x00000000
+#define DDRSS_PHY_608_DATA 0x00000000
+#define DDRSS_PHY_609_DATA 0x00000000
+#define DDRSS_PHY_610_DATA 0x00000000
+#define DDRSS_PHY_611_DATA 0x00000000
+#define DDRSS_PHY_612_DATA 0x00000000
+#define DDRSS_PHY_613_DATA 0x00000000
+#define DDRSS_PHY_614_DATA 0x00000000
+#define DDRSS_PHY_615_DATA 0x00000000
+#define DDRSS_PHY_616_DATA 0x00000000
+#define DDRSS_PHY_617_DATA 0x00000000
+#define DDRSS_PHY_618_DATA 0x00000000
+#define DDRSS_PHY_619_DATA 0x00000000
+#define DDRSS_PHY_620_DATA 0x00000000
+#define DDRSS_PHY_621_DATA 0x00000000
+#define DDRSS_PHY_622_DATA 0x00000000
+#define DDRSS_PHY_623_DATA 0x00000000
+#define DDRSS_PHY_624_DATA 0x00000000
+#define DDRSS_PHY_625_DATA 0x00000000
+#define DDRSS_PHY_626_DATA 0x00000000
+#define DDRSS_PHY_627_DATA 0x00000000
+#define DDRSS_PHY_628_DATA 0x00000000
+#define DDRSS_PHY_629_DATA 0x00000000
+#define DDRSS_PHY_630_DATA 0x00000000
+#define DDRSS_PHY_631_DATA 0x00000000
+#define DDRSS_PHY_632_DATA 0x00000000
+#define DDRSS_PHY_633_DATA 0x00000000
+#define DDRSS_PHY_634_DATA 0x00000000
+#define DDRSS_PHY_635_DATA 0x00000000
+#define DDRSS_PHY_636_DATA 0x00000000
+#define DDRSS_PHY_637_DATA 0x00000000
+#define DDRSS_PHY_638_DATA 0x00000000
+#define DDRSS_PHY_639_DATA 0x00000000
+#define DDRSS_PHY_640_DATA 0x00000000
+#define DDRSS_PHY_641_DATA 0x00000000
+#define DDRSS_PHY_642_DATA 0x00000000
+#define DDRSS_PHY_643_DATA 0x00000000
+#define DDRSS_PHY_644_DATA 0x00000000
+#define DDRSS_PHY_645_DATA 0x00000000
+#define DDRSS_PHY_646_DATA 0x00000000
+#define DDRSS_PHY_647_DATA 0x00000000
+#define DDRSS_PHY_648_DATA 0x00000000
+#define DDRSS_PHY_649_DATA 0x00000000
+#define DDRSS_PHY_650_DATA 0x00000000
+#define DDRSS_PHY_651_DATA 0x00000000
+#define DDRSS_PHY_652_DATA 0x00000000
+#define DDRSS_PHY_653_DATA 0x00000000
+#define DDRSS_PHY_654_DATA 0x00000000
+#define DDRSS_PHY_655_DATA 0x00000000
+#define DDRSS_PHY_656_DATA 0x00000000
+#define DDRSS_PHY_657_DATA 0x00000000
+#define DDRSS_PHY_658_DATA 0x00000000
+#define DDRSS_PHY_659_DATA 0x00000000
+#define DDRSS_PHY_660_DATA 0x00000000
+#define DDRSS_PHY_661_DATA 0x00000000
+#define DDRSS_PHY_662_DATA 0x00000000
+#define DDRSS_PHY_663_DATA 0x00000000
+#define DDRSS_PHY_664_DATA 0x00000000
+#define DDRSS_PHY_665_DATA 0x00000000
+#define DDRSS_PHY_666_DATA 0x00000000
+#define DDRSS_PHY_667_DATA 0x00000000
+#define DDRSS_PHY_668_DATA 0x00000000
+#define DDRSS_PHY_669_DATA 0x00000000
+#define DDRSS_PHY_670_DATA 0x00000000
+#define DDRSS_PHY_671_DATA 0x00000000
+#define DDRSS_PHY_672_DATA 0x00000000
+#define DDRSS_PHY_673_DATA 0x00000000
+#define DDRSS_PHY_674_DATA 0x00000000
+#define DDRSS_PHY_675_DATA 0x00000000
+#define DDRSS_PHY_676_DATA 0x00000000
+#define DDRSS_PHY_677_DATA 0x00000000
+#define DDRSS_PHY_678_DATA 0x00000000
+#define DDRSS_PHY_679_DATA 0x00000000
+#define DDRSS_PHY_680_DATA 0x00000000
+#define DDRSS_PHY_681_DATA 0x00000000
+#define DDRSS_PHY_682_DATA 0x00000000
+#define DDRSS_PHY_683_DATA 0x00000000
+#define DDRSS_PHY_684_DATA 0x00000000
+#define DDRSS_PHY_685_DATA 0x00000000
+#define DDRSS_PHY_686_DATA 0x00000000
+#define DDRSS_PHY_687_DATA 0x00000000
+#define DDRSS_PHY_688_DATA 0x00000000
+#define DDRSS_PHY_689_DATA 0x00000000
+#define DDRSS_PHY_690_DATA 0x00000000
+#define DDRSS_PHY_691_DATA 0x00000000
+#define DDRSS_PHY_692_DATA 0x00000000
+#define DDRSS_PHY_693_DATA 0x00000000
+#define DDRSS_PHY_694_DATA 0x00000000
+#define DDRSS_PHY_695_DATA 0x00000000
+#define DDRSS_PHY_696_DATA 0x00000000
+#define DDRSS_PHY_697_DATA 0x00000000
+#define DDRSS_PHY_698_DATA 0x00000000
+#define DDRSS_PHY_699_DATA 0x00000000
+#define DDRSS_PHY_700_DATA 0x00000000
+#define DDRSS_PHY_701_DATA 0x00000000
+#define DDRSS_PHY_702_DATA 0x00000000
+#define DDRSS_PHY_703_DATA 0x00000000
+#define DDRSS_PHY_704_DATA 0x00000000
+#define DDRSS_PHY_705_DATA 0x00000000
+#define DDRSS_PHY_706_DATA 0x00000000
+#define DDRSS_PHY_707_DATA 0x00000000
+#define DDRSS_PHY_708_DATA 0x00000000
+#define DDRSS_PHY_709_DATA 0x00000000
+#define DDRSS_PHY_710_DATA 0x00000000
+#define DDRSS_PHY_711_DATA 0x00000000
+#define DDRSS_PHY_712_DATA 0x00000000
+#define DDRSS_PHY_713_DATA 0x00000000
+#define DDRSS_PHY_714_DATA 0x00000000
+#define DDRSS_PHY_715_DATA 0x00000000
+#define DDRSS_PHY_716_DATA 0x00000000
+#define DDRSS_PHY_717_DATA 0x00000000
+#define DDRSS_PHY_718_DATA 0x00000000
+#define DDRSS_PHY_719_DATA 0x00000000
+#define DDRSS_PHY_720_DATA 0x00000000
+#define DDRSS_PHY_721_DATA 0x00000000
+#define DDRSS_PHY_722_DATA 0x00000000
+#define DDRSS_PHY_723_DATA 0x00000000
+#define DDRSS_PHY_724_DATA 0x00000000
+#define DDRSS_PHY_725_DATA 0x00000000
+#define DDRSS_PHY_726_DATA 0x00000000
+#define DDRSS_PHY_727_DATA 0x00000000
+#define DDRSS_PHY_728_DATA 0x00000000
+#define DDRSS_PHY_729_DATA 0x00000000
+#define DDRSS_PHY_730_DATA 0x00000000
+#define DDRSS_PHY_731_DATA 0x00000000
+#define DDRSS_PHY_732_DATA 0x00000000
+#define DDRSS_PHY_733_DATA 0x00000000
+#define DDRSS_PHY_734_DATA 0x00000000
+#define DDRSS_PHY_735_DATA 0x00000000
+#define DDRSS_PHY_736_DATA 0x00000000
+#define DDRSS_PHY_737_DATA 0x00000000
+#define DDRSS_PHY_738_DATA 0x00000000
+#define DDRSS_PHY_739_DATA 0x00000000
+#define DDRSS_PHY_740_DATA 0x00000000
+#define DDRSS_PHY_741_DATA 0x00000000
+#define DDRSS_PHY_742_DATA 0x00000000
+#define DDRSS_PHY_743_DATA 0x00000000
+#define DDRSS_PHY_744_DATA 0x00000000
+#define DDRSS_PHY_745_DATA 0x00000000
+#define DDRSS_PHY_746_DATA 0x00000000
+#define DDRSS_PHY_747_DATA 0x00000000
+#define DDRSS_PHY_748_DATA 0x00000000
+#define DDRSS_PHY_749_DATA 0x00000000
+#define DDRSS_PHY_750_DATA 0x00000000
+#define DDRSS_PHY_751_DATA 0x00000000
+#define DDRSS_PHY_752_DATA 0x00000000
+#define DDRSS_PHY_753_DATA 0x00000000
+#define DDRSS_PHY_754_DATA 0x00000000
+#define DDRSS_PHY_755_DATA 0x00000000
+#define DDRSS_PHY_756_DATA 0x00000000
+#define DDRSS_PHY_757_DATA 0x00000000
+#define DDRSS_PHY_758_DATA 0x00000000
+#define DDRSS_PHY_759_DATA 0x00000000
+#define DDRSS_PHY_760_DATA 0x00000000
+#define DDRSS_PHY_761_DATA 0x00000000
+#define DDRSS_PHY_762_DATA 0x00000000
+#define DDRSS_PHY_763_DATA 0x00000000
+#define DDRSS_PHY_764_DATA 0x00000000
+#define DDRSS_PHY_765_DATA 0x00000000
+#define DDRSS_PHY_766_DATA 0x00000000
+#define DDRSS_PHY_767_DATA 0x00000000
+#define DDRSS_PHY_768_DATA 0x00000000
+#define DDRSS_PHY_769_DATA 0x00000000
+#define DDRSS_PHY_770_DATA 0x00000000
+#define DDRSS_PHY_771_DATA 0x00000000
+#define DDRSS_PHY_772_DATA 0x00000000
+#define DDRSS_PHY_773_DATA 0x00000100
+#define DDRSS_PHY_774_DATA 0x00000200
+#define DDRSS_PHY_775_DATA 0x00000000
+#define DDRSS_PHY_776_DATA 0x00000000
+#define DDRSS_PHY_777_DATA 0x00000000
+#define DDRSS_PHY_778_DATA 0x00000000
+#define DDRSS_PHY_779_DATA 0x00400000
+#define DDRSS_PHY_780_DATA 0x00000080
+#define DDRSS_PHY_781_DATA 0x00DCBA98
+#define DDRSS_PHY_782_DATA 0x03000000
+#define DDRSS_PHY_783_DATA 0x00200000
+#define DDRSS_PHY_784_DATA 0x00000000
+#define DDRSS_PHY_785_DATA 0x00000000
+#define DDRSS_PHY_786_DATA 0x00000000
+#define DDRSS_PHY_787_DATA 0x00000000
+#define DDRSS_PHY_788_DATA 0x0000002A
+#define DDRSS_PHY_789_DATA 0x00000015
+#define DDRSS_PHY_790_DATA 0x00000015
+#define DDRSS_PHY_791_DATA 0x0000002A
+#define DDRSS_PHY_792_DATA 0x00000033
+#define DDRSS_PHY_793_DATA 0x0000000C
+#define DDRSS_PHY_794_DATA 0x0000000C
+#define DDRSS_PHY_795_DATA 0x00000033
+#define DDRSS_PHY_796_DATA 0x00000000
+#define DDRSS_PHY_797_DATA 0x00000000
+#define DDRSS_PHY_798_DATA 0x000F0000
+#define DDRSS_PHY_799_DATA 0x0000000F
+#define DDRSS_PHY_800_DATA 0x000002CC
+#define DDRSS_PHY_801_DATA 0x00030000
+#define DDRSS_PHY_802_DATA 0x00000300
+#define DDRSS_PHY_803_DATA 0x00000300
+#define DDRSS_PHY_804_DATA 0x00000300
+#define DDRSS_PHY_805_DATA 0x00000300
+#define DDRSS_PHY_806_DATA 0x00000300
+#define DDRSS_PHY_807_DATA 0x42080010
+#define DDRSS_PHY_808_DATA 0x0000803E
+#define DDRSS_PHY_809_DATA 0x00000003
+#define DDRSS_PHY_810_DATA 0x00000002
+#define DDRSS_PHY_811_DATA 0x00000000
+#define DDRSS_PHY_812_DATA 0x00000000
+#define DDRSS_PHY_813_DATA 0x00000000
+#define DDRSS_PHY_814_DATA 0x00000000
+#define DDRSS_PHY_815_DATA 0x00000000
+#define DDRSS_PHY_816_DATA 0x00000000
+#define DDRSS_PHY_817_DATA 0x00000000
+#define DDRSS_PHY_818_DATA 0x00000000
+#define DDRSS_PHY_819_DATA 0x00000000
+#define DDRSS_PHY_820_DATA 0x00000000
+#define DDRSS_PHY_821_DATA 0x00000000
+#define DDRSS_PHY_822_DATA 0x00000000
+#define DDRSS_PHY_823_DATA 0x00000000
+#define DDRSS_PHY_824_DATA 0x00000000
+#define DDRSS_PHY_825_DATA 0x00000000
+#define DDRSS_PHY_826_DATA 0x00000000
+#define DDRSS_PHY_827_DATA 0x00000000
+#define DDRSS_PHY_828_DATA 0x00000000
+#define DDRSS_PHY_829_DATA 0x00000000
+#define DDRSS_PHY_830_DATA 0x00000000
+#define DDRSS_PHY_831_DATA 0x00000000
+#define DDRSS_PHY_832_DATA 0x00000000
+#define DDRSS_PHY_833_DATA 0x00000000
+#define DDRSS_PHY_834_DATA 0x00000000
+#define DDRSS_PHY_835_DATA 0x00000000
+#define DDRSS_PHY_836_DATA 0x00000000
+#define DDRSS_PHY_837_DATA 0x00000000
+#define DDRSS_PHY_838_DATA 0x00000000
+#define DDRSS_PHY_839_DATA 0x00000000
+#define DDRSS_PHY_840_DATA 0x00000000
+#define DDRSS_PHY_841_DATA 0x00000000
+#define DDRSS_PHY_842_DATA 0x00000000
+#define DDRSS_PHY_843_DATA 0x00000000
+#define DDRSS_PHY_844_DATA 0x00000000
+#define DDRSS_PHY_845_DATA 0x00000000
+#define DDRSS_PHY_846_DATA 0x00000000
+#define DDRSS_PHY_847_DATA 0x00000000
+#define DDRSS_PHY_848_DATA 0x00000000
+#define DDRSS_PHY_849_DATA 0x00000000
+#define DDRSS_PHY_850_DATA 0x00000000
+#define DDRSS_PHY_851_DATA 0x00000000
+#define DDRSS_PHY_852_DATA 0x00000000
+#define DDRSS_PHY_853_DATA 0x00000000
+#define DDRSS_PHY_854_DATA 0x00000000
+#define DDRSS_PHY_855_DATA 0x00000000
+#define DDRSS_PHY_856_DATA 0x00000000
+#define DDRSS_PHY_857_DATA 0x00000000
+#define DDRSS_PHY_858_DATA 0x00000000
+#define DDRSS_PHY_859_DATA 0x00000000
+#define DDRSS_PHY_860_DATA 0x00000000
+#define DDRSS_PHY_861_DATA 0x00000000
+#define DDRSS_PHY_862_DATA 0x00000000
+#define DDRSS_PHY_863_DATA 0x00000000
+#define DDRSS_PHY_864_DATA 0x00000000
+#define DDRSS_PHY_865_DATA 0x00000000
+#define DDRSS_PHY_866_DATA 0x00000000
+#define DDRSS_PHY_867_DATA 0x00000000
+#define DDRSS_PHY_868_DATA 0x00000000
+#define DDRSS_PHY_869_DATA 0x00000000
+#define DDRSS_PHY_870_DATA 0x00000000
+#define DDRSS_PHY_871_DATA 0x00000000
+#define DDRSS_PHY_872_DATA 0x00000000
+#define DDRSS_PHY_873_DATA 0x00000000
+#define DDRSS_PHY_874_DATA 0x00000000
+#define DDRSS_PHY_875_DATA 0x00000000
+#define DDRSS_PHY_876_DATA 0x00000000
+#define DDRSS_PHY_877_DATA 0x00000000
+#define DDRSS_PHY_878_DATA 0x00000000
+#define DDRSS_PHY_879_DATA 0x00000000
+#define DDRSS_PHY_880_DATA 0x00000000
+#define DDRSS_PHY_881_DATA 0x00000000
+#define DDRSS_PHY_882_DATA 0x00000000
+#define DDRSS_PHY_883_DATA 0x00000000
+#define DDRSS_PHY_884_DATA 0x00000000
+#define DDRSS_PHY_885_DATA 0x00000000
+#define DDRSS_PHY_886_DATA 0x00000000
+#define DDRSS_PHY_887_DATA 0x00000000
+#define DDRSS_PHY_888_DATA 0x00000000
+#define DDRSS_PHY_889_DATA 0x00000000
+#define DDRSS_PHY_890_DATA 0x00000000
+#define DDRSS_PHY_891_DATA 0x00000000
+#define DDRSS_PHY_892_DATA 0x00000000
+#define DDRSS_PHY_893_DATA 0x00000000
+#define DDRSS_PHY_894_DATA 0x00000000
+#define DDRSS_PHY_895_DATA 0x00000000
+#define DDRSS_PHY_896_DATA 0x00000000
+#define DDRSS_PHY_897_DATA 0x00000000
+#define DDRSS_PHY_898_DATA 0x00000000
+#define DDRSS_PHY_899_DATA 0x00000000
+#define DDRSS_PHY_900_DATA 0x00000000
+#define DDRSS_PHY_901_DATA 0x00000000
+#define DDRSS_PHY_902_DATA 0x00000000
+#define DDRSS_PHY_903_DATA 0x00000000
+#define DDRSS_PHY_904_DATA 0x00000000
+#define DDRSS_PHY_905_DATA 0x00000000
+#define DDRSS_PHY_906_DATA 0x00000000
+#define DDRSS_PHY_907_DATA 0x00000000
+#define DDRSS_PHY_908_DATA 0x00000000
+#define DDRSS_PHY_909_DATA 0x00000000
+#define DDRSS_PHY_910_DATA 0x00000000
+#define DDRSS_PHY_911_DATA 0x00000000
+#define DDRSS_PHY_912_DATA 0x00000000
+#define DDRSS_PHY_913_DATA 0x00000000
+#define DDRSS_PHY_914_DATA 0x00000000
+#define DDRSS_PHY_915_DATA 0x00000000
+#define DDRSS_PHY_916_DATA 0x00000000
+#define DDRSS_PHY_917_DATA 0x00000000
+#define DDRSS_PHY_918_DATA 0x00000000
+#define DDRSS_PHY_919_DATA 0x00000000
+#define DDRSS_PHY_920_DATA 0x00000000
+#define DDRSS_PHY_921_DATA 0x00000000
+#define DDRSS_PHY_922_DATA 0x00000000
+#define DDRSS_PHY_923_DATA 0x00000000
+#define DDRSS_PHY_924_DATA 0x00000000
+#define DDRSS_PHY_925_DATA 0x00000000
+#define DDRSS_PHY_926_DATA 0x00000000
+#define DDRSS_PHY_927_DATA 0x00000000
+#define DDRSS_PHY_928_DATA 0x00000000
+#define DDRSS_PHY_929_DATA 0x00000000
+#define DDRSS_PHY_930_DATA 0x00000000
+#define DDRSS_PHY_931_DATA 0x00000000
+#define DDRSS_PHY_932_DATA 0x00000000
+#define DDRSS_PHY_933_DATA 0x00000000
+#define DDRSS_PHY_934_DATA 0x00000000
+#define DDRSS_PHY_935_DATA 0x00000000
+#define DDRSS_PHY_936_DATA 0x00000000
+#define DDRSS_PHY_937_DATA 0x00000000
+#define DDRSS_PHY_938_DATA 0x00000000
+#define DDRSS_PHY_939_DATA 0x00000000
+#define DDRSS_PHY_940_DATA 0x00000000
+#define DDRSS_PHY_941_DATA 0x00000000
+#define DDRSS_PHY_942_DATA 0x00000000
+#define DDRSS_PHY_943_DATA 0x00000000
+#define DDRSS_PHY_944_DATA 0x00000000
+#define DDRSS_PHY_945_DATA 0x00000000
+#define DDRSS_PHY_946_DATA 0x00000000
+#define DDRSS_PHY_947_DATA 0x00000000
+#define DDRSS_PHY_948_DATA 0x00000000
+#define DDRSS_PHY_949_DATA 0x00000000
+#define DDRSS_PHY_950_DATA 0x00000000
+#define DDRSS_PHY_951_DATA 0x00000000
+#define DDRSS_PHY_952_DATA 0x00000000
+#define DDRSS_PHY_953_DATA 0x00000000
+#define DDRSS_PHY_954_DATA 0x00000000
+#define DDRSS_PHY_955_DATA 0x00000000
+#define DDRSS_PHY_956_DATA 0x00000000
+#define DDRSS_PHY_957_DATA 0x00000000
+#define DDRSS_PHY_958_DATA 0x00000000
+#define DDRSS_PHY_959_DATA 0x00000000
+#define DDRSS_PHY_960_DATA 0x00000000
+#define DDRSS_PHY_961_DATA 0x00000000
+#define DDRSS_PHY_962_DATA 0x00000000
+#define DDRSS_PHY_963_DATA 0x00000000
+#define DDRSS_PHY_964_DATA 0x00000000
+#define DDRSS_PHY_965_DATA 0x00000000
+#define DDRSS_PHY_966_DATA 0x00000000
+#define DDRSS_PHY_967_DATA 0x00000000
+#define DDRSS_PHY_968_DATA 0x00000000
+#define DDRSS_PHY_969_DATA 0x00000000
+#define DDRSS_PHY_970_DATA 0x00000000
+#define DDRSS_PHY_971_DATA 0x00000000
+#define DDRSS_PHY_972_DATA 0x00000000
+#define DDRSS_PHY_973_DATA 0x00000000
+#define DDRSS_PHY_974_DATA 0x00000000
+#define DDRSS_PHY_975_DATA 0x00000000
+#define DDRSS_PHY_976_DATA 0x00000000
+#define DDRSS_PHY_977_DATA 0x00000000
+#define DDRSS_PHY_978_DATA 0x00000000
+#define DDRSS_PHY_979_DATA 0x00000000
+#define DDRSS_PHY_980_DATA 0x00000000
+#define DDRSS_PHY_981_DATA 0x00000000
+#define DDRSS_PHY_982_DATA 0x00000000
+#define DDRSS_PHY_983_DATA 0x00000000
+#define DDRSS_PHY_984_DATA 0x00000000
+#define DDRSS_PHY_985_DATA 0x00000000
+#define DDRSS_PHY_986_DATA 0x00000000
+#define DDRSS_PHY_987_DATA 0x00000000
+#define DDRSS_PHY_988_DATA 0x00000000
+#define DDRSS_PHY_989_DATA 0x00000000
+#define DDRSS_PHY_990_DATA 0x00000000
+#define DDRSS_PHY_991_DATA 0x00000000
+#define DDRSS_PHY_992_DATA 0x00000000
+#define DDRSS_PHY_993_DATA 0x00000000
+#define DDRSS_PHY_994_DATA 0x00000000
+#define DDRSS_PHY_995_DATA 0x00000000
+#define DDRSS_PHY_996_DATA 0x00000000
+#define DDRSS_PHY_997_DATA 0x00000000
+#define DDRSS_PHY_998_DATA 0x00000000
+#define DDRSS_PHY_999_DATA 0x00000000
+#define DDRSS_PHY_1000_DATA 0x00000000
+#define DDRSS_PHY_1001_DATA 0x00000000
+#define DDRSS_PHY_1002_DATA 0x00000000
+#define DDRSS_PHY_1003_DATA 0x00000000
+#define DDRSS_PHY_1004_DATA 0x00000000
+#define DDRSS_PHY_1005_DATA 0x00000000
+#define DDRSS_PHY_1006_DATA 0x00000000
+#define DDRSS_PHY_1007_DATA 0x00000000
+#define DDRSS_PHY_1008_DATA 0x00000000
+#define DDRSS_PHY_1009_DATA 0x00000000
+#define DDRSS_PHY_1010_DATA 0x00000000
+#define DDRSS_PHY_1011_DATA 0x00000000
+#define DDRSS_PHY_1012_DATA 0x00000000
+#define DDRSS_PHY_1013_DATA 0x00000000
+#define DDRSS_PHY_1014_DATA 0x00000000
+#define DDRSS_PHY_1015_DATA 0x00000000
+#define DDRSS_PHY_1016_DATA 0x00000000
+#define DDRSS_PHY_1017_DATA 0x00000000
+#define DDRSS_PHY_1018_DATA 0x00000000
+#define DDRSS_PHY_1019_DATA 0x00000000
+#define DDRSS_PHY_1020_DATA 0x00000000
+#define DDRSS_PHY_1021_DATA 0x00000000
+#define DDRSS_PHY_1022_DATA 0x00000000
+#define DDRSS_PHY_1023_DATA 0x00000000
+#define DDRSS_PHY_1024_DATA 0x00000000
+#define DDRSS_PHY_1025_DATA 0x00000000
+#define DDRSS_PHY_1026_DATA 0x00000000
+#define DDRSS_PHY_1027_DATA 0x00000000
+#define DDRSS_PHY_1028_DATA 0x00000000
+#define DDRSS_PHY_1029_DATA 0x00000100
+#define DDRSS_PHY_1030_DATA 0x00000200
+#define DDRSS_PHY_1031_DATA 0x00000000
+#define DDRSS_PHY_1032_DATA 0x00000000
+#define DDRSS_PHY_1033_DATA 0x00000000
+#define DDRSS_PHY_1034_DATA 0x00000000
+#define DDRSS_PHY_1035_DATA 0x00400000
+#define DDRSS_PHY_1036_DATA 0x00000080
+#define DDRSS_PHY_1037_DATA 0x00DCBA98
+#define DDRSS_PHY_1038_DATA 0x03000000
+#define DDRSS_PHY_1039_DATA 0x00200000
+#define DDRSS_PHY_1040_DATA 0x00000000
+#define DDRSS_PHY_1041_DATA 0x00000000
+#define DDRSS_PHY_1042_DATA 0x00000000
+#define DDRSS_PHY_1043_DATA 0x00000000
+#define DDRSS_PHY_1044_DATA 0x0000002A
+#define DDRSS_PHY_1045_DATA 0x00000015
+#define DDRSS_PHY_1046_DATA 0x00000015
+#define DDRSS_PHY_1047_DATA 0x0000002A
+#define DDRSS_PHY_1048_DATA 0x00000033
+#define DDRSS_PHY_1049_DATA 0x0000000C
+#define DDRSS_PHY_1050_DATA 0x0000000C
+#define DDRSS_PHY_1051_DATA 0x00000033
+#define DDRSS_PHY_1052_DATA 0x2307B9AC
+#define DDRSS_PHY_1053_DATA 0x10000000
+#define DDRSS_PHY_1054_DATA 0x000F0000
+#define DDRSS_PHY_1055_DATA 0x0000000F
+#define DDRSS_PHY_1056_DATA 0x000002CC
+#define DDRSS_PHY_1057_DATA 0x00030000
+#define DDRSS_PHY_1058_DATA 0x00000300
+#define DDRSS_PHY_1059_DATA 0x00000300
+#define DDRSS_PHY_1060_DATA 0x00000300
+#define DDRSS_PHY_1061_DATA 0x00000300
+#define DDRSS_PHY_1062_DATA 0x00000300
+#define DDRSS_PHY_1063_DATA 0x42080010
+#define DDRSS_PHY_1064_DATA 0x0000803E
+#define DDRSS_PHY_1065_DATA 0x00000003
+#define DDRSS_PHY_1066_DATA 0x00000002
+#define DDRSS_PHY_1067_DATA 0x00000000
+#define DDRSS_PHY_1068_DATA 0x00000000
+#define DDRSS_PHY_1069_DATA 0x00000000
+#define DDRSS_PHY_1070_DATA 0x00000000
+#define DDRSS_PHY_1071_DATA 0x00000000
+#define DDRSS_PHY_1072_DATA 0x00000000
+#define DDRSS_PHY_1073_DATA 0x00000000
+#define DDRSS_PHY_1074_DATA 0x00000000
+#define DDRSS_PHY_1075_DATA 0x00000000
+#define DDRSS_PHY_1076_DATA 0x00000000
+#define DDRSS_PHY_1077_DATA 0x00000000
+#define DDRSS_PHY_1078_DATA 0x00000000
+#define DDRSS_PHY_1079_DATA 0x00000000
+#define DDRSS_PHY_1080_DATA 0x00000000
+#define DDRSS_PHY_1081_DATA 0x00000000
+#define DDRSS_PHY_1082_DATA 0x00000000
+#define DDRSS_PHY_1083_DATA 0x00000000
+#define DDRSS_PHY_1084_DATA 0x00000000
+#define DDRSS_PHY_1085_DATA 0x00000000
+#define DDRSS_PHY_1086_DATA 0x00000000
+#define DDRSS_PHY_1087_DATA 0x00000000
+#define DDRSS_PHY_1088_DATA 0x00000000
+#define DDRSS_PHY_1089_DATA 0x00000000
+#define DDRSS_PHY_1090_DATA 0x00000000
+#define DDRSS_PHY_1091_DATA 0x00000000
+#define DDRSS_PHY_1092_DATA 0x00000000
+#define DDRSS_PHY_1093_DATA 0x00000000
+#define DDRSS_PHY_1094_DATA 0x00000000
+#define DDRSS_PHY_1095_DATA 0x00000000
+#define DDRSS_PHY_1096_DATA 0x00000000
+#define DDRSS_PHY_1097_DATA 0x00000000
+#define DDRSS_PHY_1098_DATA 0x00000000
+#define DDRSS_PHY_1099_DATA 0x00000000
+#define DDRSS_PHY_1100_DATA 0x00000000
+#define DDRSS_PHY_1101_DATA 0x00000000
+#define DDRSS_PHY_1102_DATA 0x00000000
+#define DDRSS_PHY_1103_DATA 0x00000000
+#define DDRSS_PHY_1104_DATA 0x00000000
+#define DDRSS_PHY_1105_DATA 0x00000000
+#define DDRSS_PHY_1106_DATA 0x00000000
+#define DDRSS_PHY_1107_DATA 0x00000000
+#define DDRSS_PHY_1108_DATA 0x00000000
+#define DDRSS_PHY_1109_DATA 0x00000000
+#define DDRSS_PHY_1110_DATA 0x00000000
+#define DDRSS_PHY_1111_DATA 0x00000000
+#define DDRSS_PHY_1112_DATA 0x00000000
+#define DDRSS_PHY_1113_DATA 0x00000000
+#define DDRSS_PHY_1114_DATA 0x00000000
+#define DDRSS_PHY_1115_DATA 0x00000000
+#define DDRSS_PHY_1116_DATA 0x00000000
+#define DDRSS_PHY_1117_DATA 0x00000000
+#define DDRSS_PHY_1118_DATA 0x00000000
+#define DDRSS_PHY_1119_DATA 0x00000000
+#define DDRSS_PHY_1120_DATA 0x00000000
+#define DDRSS_PHY_1121_DATA 0x00000000
+#define DDRSS_PHY_1122_DATA 0x00000000
+#define DDRSS_PHY_1123_DATA 0x00000000
+#define DDRSS_PHY_1124_DATA 0x00000000
+#define DDRSS_PHY_1125_DATA 0x00000000
+#define DDRSS_PHY_1126_DATA 0x00000000
+#define DDRSS_PHY_1127_DATA 0x00000000
+#define DDRSS_PHY_1128_DATA 0x00000000
+#define DDRSS_PHY_1129_DATA 0x00000000
+#define DDRSS_PHY_1130_DATA 0x00000000
+#define DDRSS_PHY_1131_DATA 0x00000000
+#define DDRSS_PHY_1132_DATA 0x00000000
+#define DDRSS_PHY_1133_DATA 0x00000000
+#define DDRSS_PHY_1134_DATA 0x00000000
+#define DDRSS_PHY_1135_DATA 0x00000000
+#define DDRSS_PHY_1136_DATA 0x00000000
+#define DDRSS_PHY_1137_DATA 0x00000000
+#define DDRSS_PHY_1138_DATA 0x00000000
+#define DDRSS_PHY_1139_DATA 0x00000000
+#define DDRSS_PHY_1140_DATA 0x00000000
+#define DDRSS_PHY_1141_DATA 0x00000000
+#define DDRSS_PHY_1142_DATA 0x00000000
+#define DDRSS_PHY_1143_DATA 0x00000000
+#define DDRSS_PHY_1144_DATA 0x00000000
+#define DDRSS_PHY_1145_DATA 0x00000000
+#define DDRSS_PHY_1146_DATA 0x00000000
+#define DDRSS_PHY_1147_DATA 0x00000000
+#define DDRSS_PHY_1148_DATA 0x00000000
+#define DDRSS_PHY_1149_DATA 0x00000000
+#define DDRSS_PHY_1150_DATA 0x00000000
+#define DDRSS_PHY_1151_DATA 0x00000000
+#define DDRSS_PHY_1152_DATA 0x00000000
+#define DDRSS_PHY_1153_DATA 0x00000000
+#define DDRSS_PHY_1154_DATA 0x00000000
+#define DDRSS_PHY_1155_DATA 0x00000000
+#define DDRSS_PHY_1156_DATA 0x00000000
+#define DDRSS_PHY_1157_DATA 0x00000000
+#define DDRSS_PHY_1158_DATA 0x00000000
+#define DDRSS_PHY_1159_DATA 0x00000000
+#define DDRSS_PHY_1160_DATA 0x00000000
+#define DDRSS_PHY_1161_DATA 0x00000000
+#define DDRSS_PHY_1162_DATA 0x00000000
+#define DDRSS_PHY_1163_DATA 0x00000000
+#define DDRSS_PHY_1164_DATA 0x00000000
+#define DDRSS_PHY_1165_DATA 0x00000000
+#define DDRSS_PHY_1166_DATA 0x00000000
+#define DDRSS_PHY_1167_DATA 0x00000000
+#define DDRSS_PHY_1168_DATA 0x00000000
+#define DDRSS_PHY_1169_DATA 0x00000000
+#define DDRSS_PHY_1170_DATA 0x00000000
+#define DDRSS_PHY_1171_DATA 0x00000000
+#define DDRSS_PHY_1172_DATA 0x00000000
+#define DDRSS_PHY_1173_DATA 0x00000000
+#define DDRSS_PHY_1174_DATA 0x00000000
+#define DDRSS_PHY_1175_DATA 0x00000000
+#define DDRSS_PHY_1176_DATA 0x00000000
+#define DDRSS_PHY_1177_DATA 0x00000000
+#define DDRSS_PHY_1178_DATA 0x00000000
+#define DDRSS_PHY_1179_DATA 0x00000000
+#define DDRSS_PHY_1180_DATA 0x00000000
+#define DDRSS_PHY_1181_DATA 0x00000000
+#define DDRSS_PHY_1182_DATA 0x00000000
+#define DDRSS_PHY_1183_DATA 0x00000000
+#define DDRSS_PHY_1184_DATA 0x00000000
+#define DDRSS_PHY_1185_DATA 0x00000000
+#define DDRSS_PHY_1186_DATA 0x00000000
+#define DDRSS_PHY_1187_DATA 0x00000000
+#define DDRSS_PHY_1188_DATA 0x00000000
+#define DDRSS_PHY_1189_DATA 0x00000000
+#define DDRSS_PHY_1190_DATA 0x00000000
+#define DDRSS_PHY_1191_DATA 0x00000000
+#define DDRSS_PHY_1192_DATA 0x00000000
+#define DDRSS_PHY_1193_DATA 0x00000000
+#define DDRSS_PHY_1194_DATA 0x00000000
+#define DDRSS_PHY_1195_DATA 0x00000000
+#define DDRSS_PHY_1196_DATA 0x00000000
+#define DDRSS_PHY_1197_DATA 0x00000000
+#define DDRSS_PHY_1198_DATA 0x00000000
+#define DDRSS_PHY_1199_DATA 0x00000000
+#define DDRSS_PHY_1200_DATA 0x00000000
+#define DDRSS_PHY_1201_DATA 0x00000000
+#define DDRSS_PHY_1202_DATA 0x00000000
+#define DDRSS_PHY_1203_DATA 0x00000000
+#define DDRSS_PHY_1204_DATA 0x00000000
+#define DDRSS_PHY_1205_DATA 0x00000000
+#define DDRSS_PHY_1206_DATA 0x00000000
+#define DDRSS_PHY_1207_DATA 0x00000000
+#define DDRSS_PHY_1208_DATA 0x00000000
+#define DDRSS_PHY_1209_DATA 0x00000000
+#define DDRSS_PHY_1210_DATA 0x00000000
+#define DDRSS_PHY_1211_DATA 0x00000000
+#define DDRSS_PHY_1212_DATA 0x00000000
+#define DDRSS_PHY_1213_DATA 0x00000000
+#define DDRSS_PHY_1214_DATA 0x00000000
+#define DDRSS_PHY_1215_DATA 0x00000000
+#define DDRSS_PHY_1216_DATA 0x00000000
+#define DDRSS_PHY_1217_DATA 0x00000000
+#define DDRSS_PHY_1218_DATA 0x00000000
+#define DDRSS_PHY_1219_DATA 0x00000000
+#define DDRSS_PHY_1220_DATA 0x00000000
+#define DDRSS_PHY_1221_DATA 0x00000000
+#define DDRSS_PHY_1222_DATA 0x00000000
+#define DDRSS_PHY_1223_DATA 0x00000000
+#define DDRSS_PHY_1224_DATA 0x00000000
+#define DDRSS_PHY_1225_DATA 0x00000000
+#define DDRSS_PHY_1226_DATA 0x00000000
+#define DDRSS_PHY_1227_DATA 0x00000000
+#define DDRSS_PHY_1228_DATA 0x00000000
+#define DDRSS_PHY_1229_DATA 0x00000000
+#define DDRSS_PHY_1230_DATA 0x00000000
+#define DDRSS_PHY_1231_DATA 0x00000000
+#define DDRSS_PHY_1232_DATA 0x00000000
+#define DDRSS_PHY_1233_DATA 0x00000000
+#define DDRSS_PHY_1234_DATA 0x00000000
+#define DDRSS_PHY_1235_DATA 0x00000000
+#define DDRSS_PHY_1236_DATA 0x00000000
+#define DDRSS_PHY_1237_DATA 0x00000000
+#define DDRSS_PHY_1238_DATA 0x00000000
+#define DDRSS_PHY_1239_DATA 0x00000000
+#define DDRSS_PHY_1240_DATA 0x00000000
+#define DDRSS_PHY_1241_DATA 0x00000000
+#define DDRSS_PHY_1242_DATA 0x00000000
+#define DDRSS_PHY_1243_DATA 0x00000000
+#define DDRSS_PHY_1244_DATA 0x00000000
+#define DDRSS_PHY_1245_DATA 0x00000000
+#define DDRSS_PHY_1246_DATA 0x00000000
+#define DDRSS_PHY_1247_DATA 0x00000000
+#define DDRSS_PHY_1248_DATA 0x00000000
+#define DDRSS_PHY_1249_DATA 0x00000000
+#define DDRSS_PHY_1250_DATA 0x00000000
+#define DDRSS_PHY_1251_DATA 0x00000000
+#define DDRSS_PHY_1252_DATA 0x00000000
+#define DDRSS_PHY_1253_DATA 0x00000000
+#define DDRSS_PHY_1254_DATA 0x00000000
+#define DDRSS_PHY_1255_DATA 0x00000000
+#define DDRSS_PHY_1256_DATA 0x00000000
+#define DDRSS_PHY_1257_DATA 0x00000000
+#define DDRSS_PHY_1258_DATA 0x00000000
+#define DDRSS_PHY_1259_DATA 0x00000000
+#define DDRSS_PHY_1260_DATA 0x00000000
+#define DDRSS_PHY_1261_DATA 0x00000000
+#define DDRSS_PHY_1262_DATA 0x00000000
+#define DDRSS_PHY_1263_DATA 0x00000000
+#define DDRSS_PHY_1264_DATA 0x00000000
+#define DDRSS_PHY_1265_DATA 0x00000000
+#define DDRSS_PHY_1266_DATA 0x00000000
+#define DDRSS_PHY_1267_DATA 0x00000000
+#define DDRSS_PHY_1268_DATA 0x00000000
+#define DDRSS_PHY_1269_DATA 0x00000000
+#define DDRSS_PHY_1270_DATA 0x00000000
+#define DDRSS_PHY_1271_DATA 0x00000000
+#define DDRSS_PHY_1272_DATA 0x00000000
+#define DDRSS_PHY_1273_DATA 0x00000000
+#define DDRSS_PHY_1274_DATA 0x00000000
+#define DDRSS_PHY_1275_DATA 0x00000000
+#define DDRSS_PHY_1276_DATA 0x00000000
+#define DDRSS_PHY_1277_DATA 0x00000000
+#define DDRSS_PHY_1278_DATA 0x00000000
+#define DDRSS_PHY_1279_DATA 0x00000000
+#define DDRSS_PHY_1280_DATA 0x00000000
+#define DDRSS_PHY_1281_DATA 0x00010100
+#define DDRSS_PHY_1282_DATA 0x00000000
+#define DDRSS_PHY_1283_DATA 0x00000000
+#define DDRSS_PHY_1284_DATA 0x00000000
+#define DDRSS_PHY_1285_DATA 0x00000000
+#define DDRSS_PHY_1286_DATA 0x00050000
+#define DDRSS_PHY_1287_DATA 0x04000000
+#define DDRSS_PHY_1288_DATA 0x00000055
+#define DDRSS_PHY_1289_DATA 0x00000000
+#define DDRSS_PHY_1290_DATA 0x00000000
+#define DDRSS_PHY_1291_DATA 0x00000000
+#define DDRSS_PHY_1292_DATA 0x00000000
+#define DDRSS_PHY_1293_DATA 0x00002001
+#define DDRSS_PHY_1294_DATA 0x00004001
+#define DDRSS_PHY_1295_DATA 0x00020028
+#define DDRSS_PHY_1296_DATA 0x01010100
+#define DDRSS_PHY_1297_DATA 0x00000000
+#define DDRSS_PHY_1298_DATA 0x00000000
+#define DDRSS_PHY_1299_DATA 0x0F0F0E06
+#define DDRSS_PHY_1300_DATA 0x00010101
+#define DDRSS_PHY_1301_DATA 0x010F0004
+#define DDRSS_PHY_1302_DATA 0x00000000
+#define DDRSS_PHY_1303_DATA 0x00000000
+#define DDRSS_PHY_1304_DATA 0x00000064
+#define DDRSS_PHY_1305_DATA 0x00000000
+#define DDRSS_PHY_1306_DATA 0x00000000
+#define DDRSS_PHY_1307_DATA 0x01020103
+#define DDRSS_PHY_1308_DATA 0x0F020102
+#define DDRSS_PHY_1309_DATA 0x03030303
+#define DDRSS_PHY_1310_DATA 0x03030303
+#define DDRSS_PHY_1311_DATA 0x00041B42
+#define DDRSS_PHY_1312_DATA 0x00005201
+#define DDRSS_PHY_1313_DATA 0x00000000
+#define DDRSS_PHY_1314_DATA 0x00000000
+#define DDRSS_PHY_1315_DATA 0x00000000
+#define DDRSS_PHY_1316_DATA 0x00000000
+#define DDRSS_PHY_1317_DATA 0x00000000
+#define DDRSS_PHY_1318_DATA 0x00000000
+#define DDRSS_PHY_1319_DATA 0x07030101
+#define DDRSS_PHY_1320_DATA 0x00005400
+#define DDRSS_PHY_1321_DATA 0x000040A2
+#define DDRSS_PHY_1322_DATA 0x00024410
+#define DDRSS_PHY_1323_DATA 0x00004410
+#define DDRSS_PHY_1324_DATA 0x00004410
+#define DDRSS_PHY_1325_DATA 0x00004410
+#define DDRSS_PHY_1326_DATA 0x00004410
+#define DDRSS_PHY_1327_DATA 0x00004410
+#define DDRSS_PHY_1328_DATA 0x00004410
+#define DDRSS_PHY_1329_DATA 0x00004410
+#define DDRSS_PHY_1330_DATA 0x00004410
+#define DDRSS_PHY_1331_DATA 0x00004410
+#define DDRSS_PHY_1332_DATA 0x00000000
+#define DDRSS_PHY_1333_DATA 0x00000076
+#define DDRSS_PHY_1334_DATA 0x00010000
+#define DDRSS_PHY_1335_DATA 0x00000008
+#define DDRSS_PHY_1336_DATA 0x00000000
+#define DDRSS_PHY_1337_DATA 0x00000000
+#define DDRSS_PHY_1338_DATA 0x00000000
+#define DDRSS_PHY_1339_DATA 0x00000000
+#define DDRSS_PHY_1340_DATA 0x00000000
+#define DDRSS_PHY_1341_DATA 0x03000000
+#define DDRSS_PHY_1342_DATA 0x00000000
+#define DDRSS_PHY_1343_DATA 0x00000000
+#define DDRSS_PHY_1344_DATA 0x00000000
+#define DDRSS_PHY_1345_DATA 0x04102006
+#define DDRSS_PHY_1346_DATA 0x00041020
+#define DDRSS_PHY_1347_DATA 0x01C98C98
+#define DDRSS_PHY_1348_DATA 0x3F400000
+#define DDRSS_PHY_1349_DATA 0x3F3F1F3F
+#define DDRSS_PHY_1350_DATA 0x0000001F
+#define DDRSS_PHY_1351_DATA 0x00000000
+#define DDRSS_PHY_1352_DATA 0x00000000
+#define DDRSS_PHY_1353_DATA 0x00000000
+#define DDRSS_PHY_1354_DATA 0x00000001
+#define DDRSS_PHY_1355_DATA 0x00000000
+#define DDRSS_PHY_1356_DATA 0x00000000
+#define DDRSS_PHY_1357_DATA 0x00000000
+#define DDRSS_PHY_1358_DATA 0x00000000
+#define DDRSS_PHY_1359_DATA 0x76543210
+#define DDRSS_PHY_1360_DATA 0x00040198
+#define DDRSS_PHY_1361_DATA 0x00000000
+#define DDRSS_PHY_1362_DATA 0x00000000
+#define DDRSS_PHY_1363_DATA 0x00000000
+#define DDRSS_PHY_1364_DATA 0x00040700
+#define DDRSS_PHY_1365_DATA 0x00000000
+#define DDRSS_PHY_1366_DATA 0x00000000
+#define DDRSS_PHY_1367_DATA 0x00000000
+#define DDRSS_PHY_1368_DATA 0x00000002
+#define DDRSS_PHY_1369_DATA 0x00000000
+#define DDRSS_PHY_1370_DATA 0x00000000
+#define DDRSS_PHY_1371_DATA 0x0001F7C0
+#define DDRSS_PHY_1372_DATA 0x00000002
+#define DDRSS_PHY_1373_DATA 0x00000000
+#define DDRSS_PHY_1374_DATA 0x00001142
+#define DDRSS_PHY_1375_DATA 0x030207AB
+#define DDRSS_PHY_1376_DATA 0x00000080
+#define DDRSS_PHY_1377_DATA 0x03900390
+#define DDRSS_PHY_1378_DATA 0x03900390
+#define DDRSS_PHY_1379_DATA 0x03900390
+#define DDRSS_PHY_1380_DATA 0x03900390
+#define DDRSS_PHY_1381_DATA 0x03000300
+#define DDRSS_PHY_1382_DATA 0x03000300
+#define DDRSS_PHY_1383_DATA 0x00000300
+#define DDRSS_PHY_1384_DATA 0x00000300
+#define DDRSS_PHY_1385_DATA 0x00000300
+#define DDRSS_PHY_1386_DATA 0x00000300
+#define DDRSS_PHY_1387_DATA 0x3183BF77
+#define DDRSS_PHY_1388_DATA 0x00000000
+#define DDRSS_PHY_1389_DATA 0x0C000DFF
+#define DDRSS_PHY_1390_DATA 0x30000DFF
+#define DDRSS_PHY_1391_DATA 0x3F0DFF11
+#define DDRSS_PHY_1392_DATA 0x01990000
+#define DDRSS_PHY_1393_DATA 0x780DFFCC
+#define DDRSS_PHY_1394_DATA 0x00000C11
+#define DDRSS_PHY_1395_DATA 0x00018011
+#define DDRSS_PHY_1396_DATA 0x0089FF00
+#define DDRSS_PHY_1397_DATA 0x000C3F11
+#define DDRSS_PHY_1398_DATA 0x01990000
+#define DDRSS_PHY_1399_DATA 0x000C3F11
+#define DDRSS_PHY_1400_DATA 0x01990000
+#define DDRSS_PHY_1401_DATA 0x3F0DFF11
+#define DDRSS_PHY_1402_DATA 0x019900E0
+#define DDRSS_PHY_1403_DATA 0x00018011
+#define DDRSS_PHY_1404_DATA 0x0089FF00
+#define DDRSS_PHY_1405_DATA 0x20040001
diff --git a/roms/u-boot/arch/arm/dts/k3-am64.dtsi b/roms/u-boot/arch/arm/dts/k3-am64.dtsi
new file mode 100644
index 000000000..6b2d0803b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am64.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC Family
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+	model = "Texas Instruments K3 AM642 SoC";
+	compatible = "ti,am642";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &mcu_uart0;
+		serial1 = &mcu_uart1;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart3;
+		serial6 = &main_uart4;
+		serial7 = &main_uart5;
+		serial8 = &main_uart6;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+	};
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f4000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */
+			 <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */
+			 <0x00 0x37000000 0x00 0x37000000 0x00 0x00040000>, /* TIMERMGR0 TIMERS */
+			 <0x00 0x39000000 0x00 0x39000000 0x00 0x00000400>, /* CPTS0 */
+			 <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
+			 <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */
+			 <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
+			 <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am64-main.dtsi"
+#include "k3-am64-mcu.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/k3-am642-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/k3-am642-evm-u-boot.dtsi
new file mode 100644
index 000000000..10dea7a1c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am642-evm-u-boot.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+};
+
+&cbass_main{
+	u-boot,dm-spl;
+	timer1: timer@2400000 {
+		compatible = "ti,omap5430-timer";
+		reg = <0x0 0x2400000 0x0 0x80>;
+		ti,timer-alwon;
+		clock-frequency = <250000000>;
+		u-boot,dm-spl;
+	};
+};
+
+&main_conf {
+	u-boot,dm-spl;
+	chipid@14 {
+		u-boot,dm-spl;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
+		>;
+	};
+};
+
+&main_i2c0 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_uart0 {
+	u-boot,dm-spl;
+};
+
+&dmss {
+	u-boot,dm-spl;
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&dmsc {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&sdhci0 {
+	u-boot,dm-spl;
+};
+
+&sdhci1 {
+	u-boot,dm-spl;
+};
+
+&cpsw3g {
+	reg = <0x0 0x8000000 0x0 0x200000>,
+	      <0x0 0x43000200 0x0 0x8>;
+	reg-names = "cpsw_nuss", "mac_efuse";
+	/delete-property/ ranges;
+
+	cpsw-phy-sel@04044 {
+		compatible = "ti,am64-phy-gmii-sel";
+		reg = <0x0 0x43004044 0x0 0x8>;
+	};
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am642-evm.dts b/roms/u-boot/arch/arm/dts/k3-am642-evm.dts
new file mode 100644
index 000000000..dc3482bea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am642-evm.dts
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am642.dtsi"
+
+/ {
+	compatible =  "ti,am642-evm", "ti,am642";
+	model = "Texas Instruments AM642 EVM";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixed-regulator-sd {
+		/* TPS2051BD */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	vddb: fixedregulator-vddb {
+		compatible = "regulator-fixed";
+		regulator-name = "vddb_3v3_display";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "am64-evm:red:heartbeat";
+			gpios = <&exp1 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+
+	mdio_mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	mdio-mux-1 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mdio_mux>;
+		mdio-parent-bus = <&cpsw3g_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw3g_phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
+			AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
+			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
+		>;
+	};
+
+	mdio1_pins_default: mdio1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
+			AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
+			AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
+			AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
+			AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
+			AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+		>;
+	};
+
+       rgmii2_pins_default: rgmii2-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+/* main_uart1 is reserved for firmware usage */
+&main_uart1 {
+	status = "reserved";
+};
+
+&main_uart2 {
+	status = "disabled";
+};
+
+&main_uart3 {
+	status = "disabled";
+};
+
+&main_uart4 {
+	status = "disabled";
+};
+
+&main_uart5 {
+	status = "disabled";
+};
+
+&main_uart6 {
+	status = "disabled";
+};
+
+&mcu_uart0 {
+	status = "disabled";
+};
+
+&mcu_uart1 {
+	status = "disabled";
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL",
+				  "GPIO_CPSW1_RST", "GPIO_RGMII1_RST",
+				  "GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT",
+				  "MMC1_SD_EN", "FSI_FET_SEL",
+				  "MCAN0_STB_3V3", "MCAN1_STB_3V3",
+				  "CPSW_FET_SEL", "CPSW_FET2_SEL",
+				  "PRG1_RGMII2_FET_SEL", "TEST_GPIO2",
+				  "GPIO_OLED_RESETn", "VPP_LDO_EN",
+				  "TEST_LED1", "TP92", "TP90", "TP88",
+				  "TP87", "TP86", "TP89", "TP91";
+	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&vddb>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
+};
+
+&mcu_i2c0 {
+	status = "disabled";
+};
+
+&mcu_i2c1 {
+	status = "disabled";
+};
+
+&mcu_spi0 {
+	status = "disabled";
+};
+
+&mcu_spi1 {
+	status = "disabled";
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default
+		     &rgmii1_pins_default
+		     &rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy3>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&sdhci0 {
+	/* emmc */
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am642-r5-evm.dts b/roms/u-boot/arch/arm/dts/k3-am642-r5-evm.dts
new file mode 100644
index 000000000..1fbf6d2c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am642-r5-evm.dts
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am642.dtsi"
+#include "k3-am64-evm-ddr4-1600MTs.dtsi"
+#include "k3-am64-ddr.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a53_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+
+	};
+
+	a53_0: a53@0 {
+		compatible = "ti,am654-rproc";
+		reg = <0x00 0x00a90000 0x00 0x10>;
+		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 135 TI_SCI_PD_EXCLUSIVE>;
+		resets = <&k3_reset 135 0>;
+		clocks = <&k3_clks 61 0>;
+		assigned-clocks = <&k3_clks 61 0>, <&k3_clks 135 0>;
+		assigned-clock-parents = <&k3_clks 61 2>;
+		assigned-clock-rates = <200000000>, <1000000000>;
+		ti,sci = <&dmsc>;
+		ti,sci-proc-id = <32>;
+		ti,sci-host-id = <10>;
+		u-boot,dm-spl;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	clk_200mhz: dummy-clock-200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		u-boot,dm-spl;
+	};
+
+	vtt_supply: vtt-supply {
+		compatible = "regulator-gpio";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
+		states = <0 0x0 3300000 0x1>;
+		u-boot,dm-spl;
+	};
+};
+
+&cbass_main {
+	sysctrler: sysctrler {
+		compatible = "ti,am654-system-controller";
+		mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>;
+		mbox-names = "tx", "rx";
+		u-boot,dm-spl;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+	main_uart0_pins_default: main-uart0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0238, PIN_INPUT, 0)		/* (B16) UART0_CTSn */
+			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0)		/* (A16) UART0_RTSn */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0)		/* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)		/* (C16) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0248, PIN_INPUT, 0)		/* (D16) UART1_CTSn */
+			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0)		/* (E16) UART1_RTSn */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0)		/* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)		/* (E14) UART1_TXD */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)	/* (B25) MMC0_CLK */
+			AM64X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0)	/* (B27) MMC0_CMD */
+			AM64X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0)	/* (A26) MMC0_DAT0 */
+			AM64X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0)	/* (E25) MMC0_DAT1 */
+			AM64X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0)	/* (C26) MMC0_DAT2 */
+			AM64X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0)	/* (A25) MMC0_DAT3 */
+			AM64X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0)	/* (E24) MMC0_DAT4 */
+			AM64X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0)	/* (A24) MMC0_DAT5 */
+			AM64X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0)	/* (B26) MMC0_DAT6 */
+			AM64X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0)	/* (D25) MMC0_DAT7 */
+			AM64X_IOPAD(0x01b0, PIN_INPUT, 0)		/* (C25) MMC0_DS */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0)	/* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0)	/* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0)	/* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0)	/* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0)	/* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0)	/* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0)	/* (D19) MMC1_SDCD */
+			AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0)	/* (C20) MMC1_SDWP */
+		>;
+	};
+
+	ddr_vtt_pins_default: ddr-vtt-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7)	/* (L18) OSPI0_CSN1.GPIO0_12 */
+		>;
+	};
+};
+
+&dmsc {
+	mboxes= <&secure_proxy_main 0>,
+		<&secure_proxy_main 1>,
+		<&secure_proxy_main 0>;
+	mbox-names = "rx", "tx", "notify";
+	ti,host-id = <35>;
+	ti,secure-host;
+};
+
+&main_uart0 {
+	/delete-property/ power-domains;
+	/delete-property/ clocks;
+	/delete-property/ clock-names;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&memorycontroller {
+	vtt-supply = <&vtt_supply>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ddr_vtt_pins_default>;
+};
+
+&sdhci0 {
+	/delete-property/ power-domains;
+	clocks = <&clk_200mhz>;
+	clock-names = "clk_xin";
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	pinctrl-0 = <&main_mmc0_pins_default>;
+};
+
+&sdhci1 {
+	/delete-property/ power-domains;
+	clocks = <&clk_200mhz>;
+	clock-names = "clk_xin";
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+};
+
+&main_gpio0 {
+	u-boot,dm-spl;
+	/delete-property/ power-domains;
+};
+
+/* EEPROM might be read before SYSFW is available */
+&main_i2c0 {
+	/delete-property/ power-domains;
+};
+
+#include "k3-am642-evm-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/k3-am642-r5-sk.dts b/roms/u-boot/arch/arm/dts/k3-am642-r5-sk.dts
new file mode 100644
index 000000000..79eff8259
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am642-r5-sk.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am642.dtsi"
+#include "k3-am64-sk-lp4-1333MTs.dtsi"
+#include "k3-am64-ddr.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a53_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+
+	};
+
+	a53_0: a53@0 {
+		compatible = "ti,am654-rproc";
+		reg = <0x00 0x00a90000 0x00 0x10>;
+		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 135 TI_SCI_PD_EXCLUSIVE>;
+		resets = <&k3_reset 135 0>;
+		clocks = <&k3_clks 61 0>;
+		assigned-clocks = <&k3_clks 61 0>, <&k3_clks 135 0>;
+		assigned-clock-parents = <&k3_clks 61 2>;
+		assigned-clock-rates = <200000000>, <1000000000>;
+		ti,sci = <&dmsc>;
+		ti,sci-proc-id = <32>;
+		ti,sci-host-id = <10>;
+		u-boot,dm-spl;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	clk_200mhz: dummy-clock-200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		u-boot,dm-spl;
+	};
+};
+
+&cbass_main {
+	sysctrler: sysctrler {
+		compatible = "ti,am654-system-controller";
+		mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>;
+		mbox-names = "tx", "rx";
+		u-boot,dm-spl;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+	main_uart0_pins_default: main-uart0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0238, PIN_INPUT, 0)		/* (B16) UART0_CTSn */
+			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0)		/* (A16) UART0_RTSn */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0)		/* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)		/* (C16) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0248, PIN_INPUT, 0)		/* (D16) UART1_CTSn */
+			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0)		/* (E16) UART1_RTSn */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0)		/* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)		/* (E14) UART1_TXD */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0)	/* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0)	/* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0)	/* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0)	/* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0)	/* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0)	/* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0)	/* (D19) MMC1_SDCD */
+			AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0)	/* (C20) MMC1_SDWP */
+		>;
+	};
+};
+
+&dmsc {
+	mboxes= <&secure_proxy_main 0>,
+		<&secure_proxy_main 1>,
+		<&secure_proxy_main 0>;
+	mbox-names = "rx", "tx", "notify";
+	ti,host-id = <35>;
+	ti,secure-host;
+};
+
+&main_uart0 {
+	/delete-property/ power-domains;
+	/delete-property/ clocks;
+	/delete-property/ clock-names;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&sdhci1 {
+	/delete-property/ power-domains;
+	clocks = <&clk_200mhz>;
+	clock-names = "clk_xin";
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+};
+
+#include "k3-am642-sk-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/k3-am642-sk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/k3-am642-sk-u-boot.dtsi
new file mode 100644
index 000000000..35b49df85
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am642-sk-u-boot.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+};
+
+&cbass_main{
+	u-boot,dm-spl;
+	timer1: timer@2400000 {
+		compatible = "ti,omap5430-timer";
+		reg = <0x0 0x2400000 0x0 0x80>;
+		ti,timer-alwon;
+		clock-frequency = <250000000>;
+		u-boot,dm-spl;
+	};
+};
+
+&main_conf {
+	u-boot,dm-spl;
+	chipid@14 {
+		u-boot,dm-spl;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
+		>;
+	};
+};
+
+&main_i2c0 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_uart0 {
+	u-boot,dm-spl;
+};
+
+&dmss {
+	u-boot,dm-spl;
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&dmsc {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&sdhci0 {
+	u-boot,dm-spl;
+};
+
+&sdhci1 {
+	u-boot,dm-spl;
+};
+
+&main_mmc1_pins_default {
+	u-boot,dm-spl;
+};
+
+&cpsw3g {
+	reg = <0x0 0x8000000 0x0 0x200000>,
+	      <0x0 0x43000200 0x0 0x8>;
+	reg-names = "cpsw_nuss", "mac_efuse";
+	/delete-property/ ranges;
+
+	cpsw-phy-sel@04044 {
+		compatible = "ti,am64-phy-gmii-sel";
+		reg = <0x0 0x43004044 0x0 0x8>;
+	};
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am642-sk.dts b/roms/u-boot/arch/arm/dts/k3-am642-sk.dts
new file mode 100644
index 000000000..df76c6e0b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am642-sk.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am642.dtsi"
+
+/ {
+	compatible =  "ti,am642-sk", "ti,am642";
+	model = "Texas Instruments AM642 SK";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&main_pmx0 {
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0294, PIN_INPUT, 0) /* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */
+			AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT, 0) /* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT, 0) /* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT, 0) /* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT, 0) /* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x0298, PIN_INPUT, 0) /* (D19) MMC1_SDCD */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
+		>;
+	};
+
+	mdio1_pins_default: mdio1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */
+			AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */
+			AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */
+			AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */
+			AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */
+			AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+		>;
+	};
+
+       rgmii2_pins_default: rgmii2-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+};
+
+&main_uart1 {
+	/* main_uart1 is reserved for firmware usage */
+	status = "reserved";
+};
+
+&main_uart2 {
+	status = "disabled";
+};
+
+&main_uart3 {
+	status = "disabled";
+};
+
+&main_uart4 {
+	status = "disabled";
+};
+
+&main_uart5 {
+	status = "disabled";
+};
+
+&main_uart6 {
+	status = "disabled";
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	pinctrl-names = "default";
+	bus-width = <4>;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default
+		     &rgmii1_pins_default
+		     &rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am642.dtsi b/roms/u-boot/arch/arm/dts/k3-am642.dtsi
new file mode 100644
index 000000000..e2b397c88
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am642.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC family in Dual core configuration
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am64.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x40000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am65-main.dtsi b/roms/u-boot/arch/arm/dts/k3-am65-main.dtsi
new file mode 100644
index 000000000..cabdba85e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am65-main.dtsi
@@ -0,0 +1,929 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include <dt-bindings/phy/phy-am654-serdes.h>
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x200000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+
+		sysfw-sram@f0000 {
+			reg = <0xf0000 0x10000>;
+		};
+
+		l3cache-sram@100000 {
+			reg = <0x100000 0x100000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0x90000>;	/* GICR */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	serdes0: serdes@900000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x900000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
+		clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+		assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+		ti,serdes-clk = <&serdes0_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 0>;
+	};
+
+	serdes1: serdes@910000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x910000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
+		clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
+		assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
+		ti,serdes-clk = <&serdes1_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 1>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	crypto: crypto@4e00000 {
+		compatible = "ti,am654-sa2ul";
+		reg = <0x0 0x4e00000 0x0 0x1200>;
+		power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+
+		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+				<&main_udmap 0x4001>;
+		dma-names = "tx", "rx1", "rx2";
+		dma-coherent;
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x0 0x4e10000 0x0 0x7d>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&k3_clks 136 1>;
+		};
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x11c000 0x0 0x2e4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx1: pinctrl@11c2e8 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x11c2e8 0x0 0x24>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 110 1>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 111 1>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 112 1>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 113 1>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	ecap0: pwm@3100000 {
+		compatible = "ti,am654-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x03100000 0x0 0x60>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 39 0>;
+		clock-names = "fck";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2100000 0x0 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 137 1>;
+		power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx0", "rx0";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2110000 0x0 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 138 1>;
+		power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		assigned-clocks = <&k3_clks 137 1>;
+		assigned-clock-rates = <48000000>;
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2120000 0x0 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 139 1>;
+		power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2130000 0x0 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 140 1>;
+		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2140000 0x0 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 141 1>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	sdhci0: sdhci@4f80000 {
+		compatible = "ti,am654-sdhci-5.1";
+		reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+		power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0x5>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	sdhci1: sdhci@4fa0000 {
+		compatible = "ti,am654-sdhci-5.1";
+		reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>;
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,otap-del-sel-ddr52 = <0x4>;
+		ti,otap-del-sel-hs200 = <0x7>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0 0x00100000 0 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		pcie0_mode: pcie-mode@4060 {
+			compatible = "syscon";
+			reg = <0x00004060 0x4>;
+		};
+
+		pcie1_mode: pcie-mode@4070 {
+			compatible = "syscon";
+			reg = <0x00004070 0x4>;
+		};
+
+		pcie_devid: pcie-devid@210 {
+			compatible = "syscon";
+			reg = <0x00000210 0x4>;
+		};
+
+		serdes0_clk: clock@4080 {
+			compatible = "syscon";
+			reg = <0x00004080 0x4>;
+		};
+
+		serdes1_clk: clock@4090 {
+			compatible = "syscon";
+			reg = <0x00004090 0x4>;
+		};
+
+		serdes_mux: mux-controller {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
+					<0x4090 0x3>; /* SERDES1 lane select */
+		};
+
+		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
+			compatible = "syscon";
+			reg = <0x0000041e0 0x14>;
+		};
+
+		ehrpwm_tbclk: clock@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	dwc3_0: dwc3@4000000 {
+		compatible = "ti,am654-dwc3";
+		reg = <0x0 0x4000000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x4000000 0x20000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		dma-coherent;
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
+		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
+		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
+
+		usb0: usb@10000 {
+			compatible = "snps,dwc3";
+			reg = <0x10000 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "peripheral",
+					  "host",
+					  "otg";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			snps,dis_u3_susphy_quirk;
+		};
+	};
+
+	usb0_phy: phy@4100000 {
+		compatible = "ti,am654-usb2", "ti,omap-usb2";
+		reg = <0x0 0x4100000 0x0 0x54>;
+		syscon-phy-power = <&scm_conf 0x4000>;
+		clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+		clock-names = "wkupclk", "refclk";
+		#phy-cells = <0>;
+	};
+
+	dwc3_1: dwc3@4020000 {
+		compatible = "ti,am654-dwc3";
+		reg = <0x0 0x4020000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x4020000 0x20000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		dma-coherent;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
+		assigned-clocks = <&k3_clks 152 2>;
+		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+
+		usb1: usb@10000 {
+			compatible = "snps,dwc3";
+			reg = <0x10000 0x10000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "peripheral",
+					  "host",
+					  "otg";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	usb1_phy: phy@4110000 {
+		compatible = "ti,am654-usb2", "ti,omap-usb2";
+		reg = <0x0 0x4110000 0x0 0x54>;
+		syscon-phy-power = <&scm_conf 0x4020>;
+		clocks = <&k3_clks 152 0>, <&k3_clks 152 1>;
+		clock-names = "wkupclk", "refclk";
+		#phy-cells = <0>;
+	};
+
+	intr_main_gpio: interrupt-controller0 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <100>;
+		ti,interrupt-ranges = <0 392 32>;
+	};
+
+	main-navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <118>;
+
+		intr_main_navss: interrupt-controller1 {
+			compatible = "ti,sci-intr";
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <182>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>;
+		};
+
+		inta_main_udmass: interrupt-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x0 0x33d00000 0x0 0x100000>;
+			interrupt-controller;
+			interrupt-parent = <&intr_main_navss>;
+			msi-controller;
+			#interrupt-cells = <0>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <179>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+		};
+
+		ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x3c000000 0x0 0x400000>,
+				<0x0 0x38000000 0x0 0x400000>,
+				<0x0 0x31120000 0x0 0x100>,
+				<0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <818>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <187>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,am654-navss-main-udmap";
+			reg =	<0x0 0x31150000 0x0 0x100>,
+				<0x0 0x34000000 0x0 0x100000>,
+				<0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <188>;
+			ti,ringacc = <&ringacc>;
+
+			ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+						<0xd>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+						<0xa>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&main_cpts_mux>;
+			clock-names = "cpts";
+			interrupts-extended = <&intr_main_navss 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+
+			main_cpts_mux: refclk-mux {
+				#clock-cells = <0>;
+				clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+					<&k3_clks 118 6>, <&k3_clks 118 3>,
+					<&k3_clks 118 8>, <&k3_clks 118 14>,
+					<&k3_clks 120 3>, <&k3_clks 121 3>;
+				assigned-clocks = <&main_cpts_mux>;
+				assigned-clock-parents = <&k3_clks 118 5>;
+			};
+		};
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_main_gpio>;
+		interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <96>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 57 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_main_gpio>;
+		interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <90>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 58 0>;
+		clock-names = "gpio";
+	};
+
+	pcie0_rc: pcie@5500000 {
+		compatible = "ti,am654-pcie-rc";
+		reg =  <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu";
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0x0 0x10020000 0 0x00010000
+			  0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
+		ti,syscon-pcie-id = <&pcie_devid>;
+		ti,syscon-pcie-mode = <&pcie0_mode>;
+		bus-range = <0x0 0xff>;
+		num-viewport = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+	};
+
+	pcie0_ep: pcie-ep@5500000 {
+		compatible = "ti,am654-pcie-ep";
+		reg =  <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
+		reg-names = "app", "dbics", "addr_space", "atu";
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		ti,syscon-pcie-mode = <&pcie0_mode>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	pcie1_rc: pcie@5600000 {
+		compatible = "ti,am654-pcie-rc";
+		reg =  <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu";
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0x0   0x18020000 0 0x00010000
+			  0x82000000 0 0x18030000 0x0   0x18030000 0 0x07FD0000>;
+		ti,syscon-pcie-id = <&pcie_devid>;
+		ti,syscon-pcie-mode = <&pcie1_mode>;
+		bus-range = <0x0 0xff>;
+		num-viewport = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+	};
+
+	pcie1_ep: pcie-ep@5600000 {
+		compatible = "ti,am654-pcie-ep";
+		reg =  <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
+		reg-names = "app", "dbics", "addr_space", "atu";
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+		ti,syscon-pcie-mode = <&pcie1_mode>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 104 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 105 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 106 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	cal: cal@6f03000 {
+		compatible = "ti,am654-cal";
+		reg = <0x0 0x06f03000 0x0 0x400>,
+		      <0x0 0x06f03800 0x0 0x40>;
+		reg-names = "cal_top",
+			    "cal_rx_core0";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		ti,camerrx-control = <&scm_conf 0x40c0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 2 0>;
+		power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi2_0: port@0 {
+				reg = <0>;
+			};
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,am65x-dss";
+		reg =	<0x0 0x04a00000 0x0 0x1000>, /* common */
+			<0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
+			<0x0 0x04a06000 0x0 0x1000>, /* vid */
+			<0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
+			<0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
+			<0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
+			<0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+		reg-names = "common", "vidl1", "vid",
+			"ovr1", "ovr2", "vp1", "vp2";
+
+		ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+
+		clocks =	<&k3_clks 67 1>,
+				<&k3_clks 216 1>,
+				<&k3_clks 67 2>;
+		clock-names = "fck", "vp1", "vp2";
+
+		/*
+		 * Set vp2 clk (DPI_1_IN_CLK) mux to PLL4 via
+		 * DIV1. See "Figure 12-3365. DSS Integration"
+		 * in AM65x TRM for details.
+		 */
+		assigned-clocks = <&k3_clks 67 2>;
+		assigned-clock-parents = <&k3_clks 67 5>;
+
+		interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+
+		dma-coherent;
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3000000 0x0 0x100>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
+		clock-names = "tbclk", "fck";
+	};
+
+	ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3010000 0x0 0x100>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
+		clock-names = "tbclk", "fck";
+	};
+
+	ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3020000 0x0 0x100>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
+		clock-names = "tbclk", "fck";
+	};
+
+	ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3030000 0x0 0x100>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
+		clock-names = "tbclk", "fck";
+	};
+
+	ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3040000 0x0 0x100>;
+		power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
+		clock-names = "tbclk", "fck";
+	};
+
+	ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3050000 0x0 0x100>;
+		power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
+		clock-names = "tbclk", "fck";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am65-mcu.dtsi b/roms/u-boot/arch/arm/dts/k3-am65-mcu.dtsi
new file mode 100644
index 000000000..7454c8cec
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am65-mcu.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_conf: scm-conf@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,am654-uart";
+			reg = <0x00 0x40a00000 0x00 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <96000000>;
+			current-speed = <115200>;
+			power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x80000>;
+		ranges = <0x0 0x00 0x41c00000 0x80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 114 1>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40300000 0x0 0x400>;
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 142 1>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40310000 0x0 0x400>;
+		interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 143 1>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40320000 0x0 0x400>;
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 144 1>;
+		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 0 2>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&mcu_udmap 0x7100>,
+			<&mcu_udmap 0x7101 >;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 1 2>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&mcu_udmap 0x7102>,
+			<&mcu_udmap 0x7103>;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	mcu-navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <119>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <195>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,am654-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <194>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+						<0xd>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+						<0xa>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
+		};
+	};
+
+	fss: fss@47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 248 0>;
+			assigned-clocks = <&k3_clks 248 0>;
+			assigned-clock-parents = <&k3_clks 248 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 249 6>;
+			power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,am654-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 5 10>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 5 10>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&mcu_cpsw_cpts_mux>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+
+			mcu_cpsw_cpts_mux: refclk-mux {
+				#clock-cells = <0>;
+				clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+					<&k3_clks 118 6>, <&k3_clks 118 3>,
+					<&k3_clks 118 8>, <&k3_clks 118 14>,
+					<&k3_clks 120 3>, <&k3_clks 121 3>;
+				assigned-clocks = <&mcu_cpsw_cpts_mux>;
+				assigned-clock-parents = <&k3_clks 118 5>;
+			};
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,am654-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,am654-r5f";
+			reg = <0x41000000 0x00008000>,
+			      <0x41010000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <159>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 159 1>;
+			firmware-name = "am65x-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,am654-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "am65x-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am65-wakeup.dtsi b/roms/u-boot/arch/arm/dts/k3-am65-wakeup.dtsi
new file mode 100644
index 000000000..ed42f13e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	dmsc: dmsc {
+		compatible = "ti,am654-sci";
+		ti,host-id = <12>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x43000014 0x4>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		reg = <0x4301c000 0x118>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,am654-uart";
+		reg = <0x42300000 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x42120000 0x100>;
+		interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 115 1>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	intr_wkup_gpio: interrupt-controller2 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <156>;
+		ti,interrupt-ranges = <0 712 16>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x42110000 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_wkup_gpio>;
+		interrupts = <60>, <61>, <62>, <63>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <56>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 59 0>;
+		clock-names = "gpio";
+	};
+
+	wkup_vtm0: temperature-sensor@42050000 {
+		compatible = "ti,am654-vtm";
+		reg = <0x42050000 0x25c>;
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-am654-industrial-thermal.dtsi"
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am65.dtsi b/roms/u-boot/arch/arm/dts/k3-am65.dtsi
new file mode 100644
index 000000000..d84c0bc05
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am65.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+	model = "Texas Instruments K3 AM654 SoC";
+	compatible = "ti,am654";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		i2c5 = &main_i2c3;
+		ethernet0 = &cpsw_port1;
+	};
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
+			 /* MCUSS Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
+
+		cbass_mcu: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /*  FSS OSPI0 data region 1 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
+
+			cbass_wakeup: bus@42040000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				/* WKUP  Basic peripherals */
+				ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
+			};
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am65-main.dtsi"
+#include "k3-am65-mcu.dtsi"
+#include "k3-am65-wakeup.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/k3-am654-base-board-ddr4-1600MTs.dtsi b/roms/u-boot/arch/arm/dts/k3-am654-base-board-ddr4-1600MTs.dtsi
new file mode 100644
index 000000000..563832190
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am654-base-board-ddr4-1600MTs.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ * This file was generated by AM65x_DRA80xM_EMIF_Tool_2.02.xlsm
+ * http://www.ti.com/lit/pdf/spracj0
+ * Configuration Parameters
+ * Memory Type: DDR4
+ * Data Rate: 1600 MT/s
+ * ECC Enabled: No
+ * Data Width: 32 bits
+ */
+#define DDR_PLL_FREQUENCY 400000000
+#define DDRSS_V2H_CTL_REG 0x000073FF
+#define DDRCTL_MSTR 0x41040010
+#define DDRCTL_RFSHCTL0 0x00210070
+#define DDRCTL_ECCCFG0 0x00000000
+#define DDRCTL_RFSHTMG 0x0061008C
+#define DDRCTL_CRCPARCTL0 0x00008000
+#define DDRCTL_CRCPARCTL1 0x1A000000
+#define DDRCTL_CRCPARCTL2 0x0048051E
+#define DDRCTL_INIT0 0x400100C4
+#define DDRCTL_INIT1 0x004F0000
+#define DDRCTL_INIT3 0x02140501
+#define DDRCTL_INIT4 0x00000020
+#define DDRCTL_INIT5 0x00100000
+#define DDRCTL_INIT6 0x00000480
+#define DDRCTL_INIT7 0x00000497
+#define DDRCTL_DRAMTMG0 0x0C0A1B0D
+#define DDRCTL_DRAMTMG1 0x00030313
+#define DDRCTL_DRAMTMG2 0x0506050A
+#define DDRCTL_DRAMTMG3 0x0000400C
+#define DDRCTL_DRAMTMG4 0x06020206
+#define DDRCTL_DRAMTMG5 0x04040302
+#define DDRCTL_DRAMTMG6 0x00000004
+#define DDRCTL_DRAMTMG7 0x00000404
+#define DDRCTL_DRAMTMG8 0x03030C05
+#define DDRCTL_DRAMTMG9 0x00020208
+#define DDRCTL_DRAMTMG10 0x001C180A
+#define DDRCTL_DRAMTMG11 0x1106010E
+#define DDRCTL_DRAMTMG12 0x00020008
+#define DDRCTL_DRAMTMG13 0x0B100002
+#define DDRCTL_DRAMTMG14 0x00000000
+#define DDRCTL_DRAMTMG15 0x0000003F
+#define DDRCTL_DRAMTMG17 0x00500028
+#define DDRCTL_ZQCTL0 0x21000040
+#define DDRCTL_ZQCTL1 0x0202FAF0
+#define DDRCTL_DFITMG0 0x04888206
+#define DDRCTL_DFITMG1 0x000A0606
+#define DDRCTL_DFITMG2 0x00000604
+#define DDRCTL_DFIMISC 0x00000001
+#define DDRCTL_ADDRMAP0 0x0000001F
+#define DDRCTL_ADDRMAP1 0x003F0808
+#define DDRCTL_ADDRMAP2 0x00000000
+#define DDRCTL_ADDRMAP3 0x00000000
+#define DDRCTL_ADDRMAP4 0x00001F1F
+#define DDRCTL_ADDRMAP5 0x08080808
+#define DDRCTL_ADDRMAP6 0x08080808
+#define DDRCTL_ADDRMAP7 0x00000F0F
+#define DDRCTL_ADDRMAP8 0x00000A0A
+#define DDRCTL_ADDRMAP9 0x00000000
+#define DDRCTL_ADDRMAP10 0x00000000
+#define DDRCTL_ADDRMAP11 0x001F1F00
+#define DDRCTL_DQMAP0 0x00000000
+#define DDRCTL_DQMAP1 0x00000000
+#define DDRCTL_DQMAP4 0x00000000
+#define DDRCTL_DQMAP5 0x00000000
+#define DDRCTL_PWRCTL 0x00000000
+#define DDRCTL_RANKCTL 0x00000000
+#define DDRCTL_ODTCFG 0x0600060C
+#define DDRCTL_ODTMAP 0x00000001
+#define DDRPHY_PGCR0 0x07001E00
+#define DDRPHY_PGCR1 0x020046C0
+#define DDRPHY_PGCR2 0x00F0BFE0
+#define DDRPHY_PGCR3 0x55AA0080
+#define DDRPHY_PGCR6 0x00013001
+#define DDRPHY_PTR2 0x00083DEF
+#define DDRPHY_PTR3 0x00061A80
+#define DDRPHY_PTR4 0x00000120
+#define DDRPHY_PTR5 0x00027100
+#define DDRPHY_PTR6 0x04000320
+#define DDRPHY_PLLCR0 0x021c4000
+#define DDRPHY_DXCCR 0x00000038
+#define DDRPHY_DSGCR 0x02A0C129
+#define DDRPHY_DCR 0x0000040C
+#define DDRPHY_DTPR0 0x041A0B06
+#define DDRPHY_DTPR1 0x28140000
+#define DDRPHY_DTPR2 0x0034E300
+#define DDRPHY_DTPR3 0x02800800
+#define DDRPHY_DTPR4 0x31180805
+#define DDRPHY_DTPR5 0x00250B06
+#define DDRPHY_DTPR6 0x00000505
+#define DDRPHY_ZQCR 0x008A2A58
+#define DDRPHY_ZQ0PR0 0x000077DD
+#define DDRPHY_ZQ1PR0 0x00007799
+#define DDRPHY_MR0 0x00000214
+#define DDRPHY_MR1 0x00000501
+#define DDRPHY_MR2 0x00000000
+#define DDRPHY_MR3 0x00000020
+#define DDRPHY_MR4 0x00000000
+#define DDRPHY_MR5 0x00000480
+#define DDRPHY_MR6 0x00000497
+#define DDRPHY_MR11 0x00000000
+#define DDRPHY_MR12 0x00000000
+#define DDRPHY_MR13 0x00000000
+#define DDRPHY_MR14 0x00000000
+#define DDRPHY_MR22 0x00000000
+#define DDRPHY_VTCR0 0xF3C32017
+#define DDRPHY_DX8SL0PLLCR0 0x021c4000
+#define DDRPHY_DX8SL1PLLCR0 0x021c4000
+#define DDRPHY_DX8SL2PLLCR0 0x021c4000
+#define DDRPHY_DTCR0 0x8000B1C7
+#define DDRPHY_DTCR1 0x00010236
+#define DDRPHY_ACIOCR0 0xF0070000
+#define DDRPHY_ACIOCR3 0x00000001
+#define DDRPHY_ACIOCR5 0x04800000
+#define DDRPHY_IOVCR0 0x0F0C0C0C
+#define DDRPHY_DX0GCR0 0x00000000
+#define DDRPHY_DX0GCR1 0x00000000
+#define DDRPHY_DX0GCR2 0x00000000
+#define DDRPHY_DX0GCR3  0x00000000
+#define DDRPHY_DX1GCR0 0x00000000
+#define DDRPHY_DX1GCR1 0x00000000
+#define DDRPHY_DX1GCR2 0x00000000
+#define DDRPHY_DX1GCR3 0x00000000
+#define DDRPHY_DX2GCR0 0x40700204
+#define DDRPHY_DX2GCR1 0x00007FFF
+#define DDRPHY_DX2GCR2 0x00000000
+#define DDRPHY_DX2GCR3  0xFFC0010B
+#define DDRPHY_DX3GCR0 0x40700204
+#define DDRPHY_DX3GCR1 0x00007FFF
+#define DDRPHY_DX3GCR2 0x00000000
+#define DDRPHY_DX3GCR3  0xFFC0010B
+#define DDRPHY_DX4GCR0 0x40703220
+#define DDRPHY_DX4GCR1 0x55556000
+#define DDRPHY_DX4GCR2 0xAAAA0000
+#define DDRPHY_DX4GCR3  0xFFE18587
+#define DDRPHY_DX0GCR4 0x0E00B03C
+#define DDRPHY_DX1GCR4 0x0E00B03C
+#define DDRPHY_DX2GCR4 0x0E00B03C
+#define DDRPHY_DX3GCR4 0x0E00B03C
+#define DDRPHY_DX4GCR4 0x0E00B03C
+#define DDRPHY_PGCR5 0x01010004
+#define DDRPHY_DX0GCR5 0x00000049
+#define DDRPHY_DX1GCR5 0x00000049
+#define DDRPHY_DX2GCR5 0x00000049
+#define DDRPHY_DX3GCR5 0x00000049
+#define DDRPHY_DX4GCR5 0x00000049
+#define DDRPHY_DX0GTR0 0x00020002
+#define DDRPHY_DX1GTR0 0x00020002
+#define DDRPHY_DX2GTR0 0x00020002
+#define DDRPHY_DX3GTR0 0x00020002
+#define DDRPHY_DX4GTR0 0x00020002
+#define DDRPHY_ODTCR 0x00010000
+#define DDRPHY_DX8SL0IOCR 0x74800000
+#define DDRPHY_DX8SL1IOCR 0x74800000
+#define DDRPHY_DX8SL2IOCR 0x74800000
+#define DDRPHY_DX8SL0DXCTL2 0x00141830
+#define DDRPHY_DX8SL1DXCTL2 0x00141830
+#define DDRPHY_DX8SL2DXCTL2 0x00141830
+#define DDRPHY_DX8SL0DQSCTL 0x01264300
+#define DDRPHY_DX8SL1DQSCTL 0x01264300
+#define DDRPHY_DX8SL2DQSCTL 0x01264300
diff --git a/roms/u-boot/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/roms/u-boot/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
new file mode 100644
index 000000000..b0602d1da
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial2 = &main_uart0;
+		ethernet0 = &cpsw_port1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		spi0 = &ospi0;
+		spi1 = &ospi1;
+	};
+};
+
+&cbass_main{
+	u-boot,dm-spl;
+	main-navss {
+		u-boot,dm-spl;
+	};
+};
+
+&cbass_mcu {
+	u-boot,dm-spl;
+
+	mcu-navss {
+		u-boot,dm-spl;
+
+		ringacc@2b800000 {
+			u-boot,dm-spl;
+			ti,dma-ring-reset-quirk;
+		};
+
+		dma-controller@285c0000 {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&cbass_wakeup {
+	u-boot,dm-spl;
+
+	chipid@43000014 {
+		u-boot,dm-spl;
+	};
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&dmsc {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+
+	wkup_i2c0_pins_default {
+		u-boot,dm-spl;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+	usb0_pins_default: usb0_pins_default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
+		>;
+		u-boot,dm-spl;
+	};
+};
+
+&main_uart0_pins_default {
+	u-boot,dm-spl;
+};
+
+&main_pmx1 {
+	u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+	mcu-fss0-ospi0-pins-default {
+		u-boot,dm-spl;
+	};
+};
+
+&main_uart0 {
+	u-boot,dm-spl;
+};
+
+&main_mmc0_pins_default {
+	u-boot,dm-spl;
+};
+
+&main_mmc1_pins_default {
+	u-boot,dm-spl;
+};
+
+&sdhci0 {
+	u-boot,dm-spl;
+};
+
+&sdhci1 {
+	u-boot,dm-spl;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		/* TODO: phy reset: TCA9555RTWR(i2c:0x21)[p04].GPIO_MCU_RGMII_RSTN */
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&mcu_cpsw {
+	reg = <0x0 0x46000000 0x0 0x200000>,
+	      <0x0 0x40f00200 0x0 0x2>;
+	reg-names = "cpsw_nuss", "mac_efuse";
+	/delete-property/ ranges;
+
+	cpsw-phy-sel@40f04040 {
+		compatible = "ti,am654-cpsw-phy-sel";
+		reg= <0x0 0x40f04040 0x0 0x4>;
+		reg-names = "gmii-sel";
+	};
+};
+
+&wkup_i2c0 {
+	u-boot,dm-spl;
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+};
+
+&fss {
+	u-boot,dm-spl;
+};
+
+&ospi0 {
+	u-boot,dm-spl;
+
+	 flash@0{
+		u-boot,dm-spl;
+	};
+};
+
+&dwc3_0 {
+	status = "okay";
+	u-boot,dm-spl;
+};
+
+&usb0_phy {
+	status = "okay";
+	u-boot,dm-spl;
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_default>;
+	dr_mode = "host";
+	u-boot,dm-spl;
+};
+
+&scm_conf {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am654-base-board.dts b/roms/u-boot/arch/arm/dts/k3-am654-base-board.dts
new file mode 100644
index 000000000..7b2cdaf7d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am654-base-board.dts
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible =  "ti,am654-evm", "ti,am654";
+	model = "Texas Instruments AM654 Base Board";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: secure-ddr@9e800000 {
+			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0100000 0 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1100000 0 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a2000000 {
+			reg = <0x00 0xa2000000 0x00 0x00100000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&push_button_pins_default>;
+
+		sw5 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		sw6 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
+		>;
+	};
+
+	push_button_pins_default: push-button-pins-default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
+			AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* (T2) MCU_OSPI0_D2 */
+			AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* (T3) MCU_OSPI0_D3 */
+			AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* (T4) MCU_OSPI0_D4 */
+			AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* (T5) MCU_OSPI0_D5 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* (R2) MCU_OSPI0_D6 */
+			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+		>;
+	};
+
+	wkup_pca554_default: wkup-pca554-default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
+			AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
+			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
+			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
+			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
+			AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
+			AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
+			AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
+			AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+			AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01e4, PIN_INPUT, 0)	/* (AF11) UART0_RXD */
+			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)	/* (AE11) UART0_TXD */
+			AM65X_IOPAD(0x01ec, PIN_INPUT, 0)	/* (AG11) UART0_CTSn */
+			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)	/* (AD11) UART0_RTSn */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */
+			AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */
+		>;
+	};
+
+	main_spi0_pins_default: main-spi0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
+			AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
+			AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */
+			AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+			AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+			AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
+		>;
+	};
+
+	usb1_pins_default: usb1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
+			AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
+			AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
+		>;
+	};
+
+	ecap0_pins_default: ecap0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	pca9554: gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wkup_pca554_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	pca9555: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&ecap0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins_default>;
+	#address-cells = <1>;
+	#size-cells= <0>;
+	ti,pindir-d0-out-d1-in = <1>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <48000000>;
+		#address-cells = <1>;
+		#size-cells= <1>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+/*
+ * Because of erratas i2025 and i2026 for silicon revision 1.0, the
+ * SD card interface might fail. Boards with sr1.0 are recommended to
+ * disable sdhci1
+ */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	sdhci-caps-mask = <0x7 0x0>;
+	disable-wp;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+	dr_mode = "otg";
+};
+
+&dwc3_0 {
+	status = "disabled";
+};
+
+&usb0_phy {
+	status = "disabled";
+};
+
+&tscadc0 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&serdes0 {
+	status = "disabled";
+};
+
+&serdes1 {
+	status = "disabled";
+};
+
+&pcie0_rc {
+	status = "disabled";
+};
+
+&pcie0_ep {
+	status = "disabled";
+};
+
+&pcie1_rc {
+	status = "disabled";
+};
+
+&pcie1_ep {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "disabled";
+};
+
+&mailbox0_cluster3 {
+	status = "disabled";
+};
+
+&mailbox0_cluster4 {
+	status = "disabled";
+};
+
+&mailbox0_cluster5 {
+	status = "disabled";
+};
+
+&mailbox0_cluster6 {
+	status = "disabled";
+};
+
+&mailbox0_cluster7 {
+	status = "disabled";
+};
+
+&mailbox0_cluster8 {
+	status = "disabled";
+};
+
+&mailbox0_cluster9 {
+	status = "disabled";
+};
+
+&mailbox0_cluster10 {
+	status = "disabled";
+};
+
+&mailbox0_cluster11 {
+	status = "disabled";
+};
+
+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&mcasp0 {
+	status = "disabled";
+};
+
+&mcasp1 {
+	status = "disabled";
+};
+
+&mcasp2 {
+	status = "disabled";
+};
+
+&dss {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am654-ddr.dtsi b/roms/u-boot/arch/arm/dts/k3-am654-ddr.dtsi
new file mode 100644
index 000000000..b22879695
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am654-ddr.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/ {
+	memorycontroller: memorycontroller@0298e000 {
+		compatible = "ti,am654-ddrss";
+		reg = <0x0 0x0298e000 0x0 0x200>,
+		      <0x0 0x02980000 0x0 0x4000>,
+		      <0x0 0x02988000 0x0 0x2000>;
+		reg-names = "ss", "ctl", "phy";
+		clocks = <&k3_clks 20 0>;
+		power-domains = <&k3_pds 20 TI_SCI_PD_SHARED>,
+				<&k3_pds 244 TI_SCI_PD_SHARED>;
+		assigned-clocks = <&k3_clks 20 1>;
+		assigned-clock-rates = <DDR_PLL_FREQUENCY>;
+		u-boot,dm-spl;
+
+		ti,ss-reg = <
+			DDRSS_V2H_CTL_REG
+		>;
+
+		ti,ctl-reg = <
+			DDRCTL_DFIMISC
+			DDRCTL_DFITMG0
+			DDRCTL_DFITMG1
+			DDRCTL_DFITMG2
+			DDRCTL_INIT0
+			DDRCTL_INIT1
+			DDRCTL_INIT3
+			DDRCTL_INIT4
+			DDRCTL_INIT5
+			DDRCTL_INIT6
+			DDRCTL_INIT7
+			DDRCTL_MSTR
+			DDRCTL_ODTCFG
+			DDRCTL_ODTMAP
+			DDRCTL_RANKCTL
+			DDRCTL_RFSHCTL0
+			DDRCTL_RFSHTMG
+			DDRCTL_ZQCTL0
+			DDRCTL_ZQCTL1
+		>;
+
+		ti,ctl-crc = <
+			DDRCTL_CRCPARCTL0
+			DDRCTL_CRCPARCTL1
+			DDRCTL_CRCPARCTL2
+		>;
+
+		ti,ctl-ecc = <
+			DDRCTL_ECCCFG0
+		>;
+
+		ti,ctl-map = <
+			DDRCTL_ADDRMAP0
+			DDRCTL_ADDRMAP1
+			DDRCTL_ADDRMAP2
+			DDRCTL_ADDRMAP3
+			DDRCTL_ADDRMAP4
+			DDRCTL_ADDRMAP5
+			DDRCTL_ADDRMAP6
+			DDRCTL_ADDRMAP7
+			DDRCTL_ADDRMAP8
+			DDRCTL_ADDRMAP9
+			DDRCTL_ADDRMAP10
+			DDRCTL_ADDRMAP11
+			DDRCTL_DQMAP0
+			DDRCTL_DQMAP1
+			DDRCTL_DQMAP4
+			DDRCTL_DQMAP5
+		>;
+
+		ti,ctl-pwr = <
+			DDRCTL_PWRCTL
+		>;
+
+		ti,ctl-timing = <
+			DDRCTL_DRAMTMG0
+			DDRCTL_DRAMTMG1
+			DDRCTL_DRAMTMG2
+			DDRCTL_DRAMTMG3
+			DDRCTL_DRAMTMG4
+			DDRCTL_DRAMTMG5
+			DDRCTL_DRAMTMG6
+			DDRCTL_DRAMTMG7
+			DDRCTL_DRAMTMG8
+			DDRCTL_DRAMTMG9
+			DDRCTL_DRAMTMG11
+			DDRCTL_DRAMTMG12
+			DDRCTL_DRAMTMG13
+			DDRCTL_DRAMTMG14
+			DDRCTL_DRAMTMG15
+			DDRCTL_DRAMTMG17
+		>;
+
+		ti,phy-cfg = <
+			DDRPHY_DCR
+			DDRPHY_DSGCR
+			DDRPHY_DX0GCR0
+			DDRPHY_DX0GCR1
+			DDRPHY_DX0GCR2
+			DDRPHY_DX0GCR3
+			DDRPHY_DX0GCR4
+			DDRPHY_DX0GCR5
+			DDRPHY_DX0GTR0
+			DDRPHY_DX1GCR0
+			DDRPHY_DX1GCR1
+			DDRPHY_DX1GCR2
+			DDRPHY_DX1GCR3
+			DDRPHY_DX1GCR4
+			DDRPHY_DX1GCR5
+			DDRPHY_DX1GTR0
+			DDRPHY_DX2GCR0
+			DDRPHY_DX2GCR1
+			DDRPHY_DX2GCR2
+			DDRPHY_DX2GCR3
+			DDRPHY_DX2GCR4
+			DDRPHY_DX2GCR5
+			DDRPHY_DX2GTR0
+			DDRPHY_DX3GCR0
+			DDRPHY_DX3GCR1
+			DDRPHY_DX3GCR2
+			DDRPHY_DX3GCR3
+			DDRPHY_DX3GCR4
+			DDRPHY_DX3GCR5
+			DDRPHY_DX3GTR0
+			DDRPHY_DX4GCR0
+			DDRPHY_DX4GCR1
+			DDRPHY_DX4GCR2
+			DDRPHY_DX4GCR3
+			DDRPHY_DX4GCR4
+			DDRPHY_DX4GCR5
+			DDRPHY_DX4GTR0
+			DDRPHY_DX8SL0DXCTL2
+			DDRPHY_DX8SL0IOCR
+			DDRPHY_DX8SL0PLLCR0
+			DDRPHY_DX8SL0DQSCTL
+			DDRPHY_DX8SL1DXCTL2
+			DDRPHY_DX8SL1IOCR
+			DDRPHY_DX8SL1PLLCR0
+			DDRPHY_DX8SL1DQSCTL
+			DDRPHY_DX8SL2DXCTL2
+			DDRPHY_DX8SL2IOCR
+			DDRPHY_DX8SL2PLLCR0
+			DDRPHY_DX8SL2DQSCTL
+			DDRPHY_DXCCR
+			DDRPHY_ODTCR
+			DDRPHY_PGCR0
+			DDRPHY_PGCR1
+			DDRPHY_PGCR2
+			DDRPHY_PGCR3
+			DDRPHY_PGCR5
+			DDRPHY_PGCR6
+		>;
+
+		ti,phy-ctl = <
+			DDRPHY_DTCR0
+			DDRPHY_DTCR1
+			DDRPHY_MR0
+			DDRPHY_MR1
+			DDRPHY_MR2
+			DDRPHY_MR3
+			DDRPHY_MR4
+			DDRPHY_MR5
+			DDRPHY_MR6
+			DDRPHY_MR11
+			DDRPHY_MR12
+			DDRPHY_MR13
+			DDRPHY_MR14
+			DDRPHY_MR22
+			DDRPHY_PLLCR0
+			DDRPHY_VTCR0
+		>;
+
+		ti,phy-ioctl = <
+			DDRPHY_ACIOCR0
+			DDRPHY_ACIOCR3
+			DDRPHY_ACIOCR5
+			DDRPHY_IOVCR0
+		>;
+
+		ti,phy-timing = <
+			DDRPHY_DTPR0
+			DDRPHY_DTPR1
+			DDRPHY_DTPR2
+			DDRPHY_DTPR3
+			DDRPHY_DTPR4
+			DDRPHY_DTPR5
+			DDRPHY_DTPR6
+			DDRPHY_PTR2
+			DDRPHY_PTR3
+			DDRPHY_PTR4
+			DDRPHY_PTR5
+			DDRPHY_PTR6
+		>;
+
+		ti,phy-zq = <
+			DDRPHY_ZQ0PR0
+			DDRPHY_ZQ1PR0
+			DDRPHY_ZQCR
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am654-industrial-thermal.dtsi b/roms/u-boot/arch/arm/dts/k3-am654-industrial-thermal.dtsi
new file mode 100644
index 000000000..9021c7380
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am654-industrial-thermal.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+mpu0_thermal: mpu0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		mpu0_crit: mpu0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mpu1_thermal: mpu1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		mpu1_crit: mpu1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mcu_thermal: mcu-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		mcu_crit: mcu-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-am654-r5-base-board.dts b/roms/u-boot/arch/arm/dts/k3-am654-r5-base-board.dts
new file mode 100644
index 000000000..087a3bb3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+#include "k3-am654-base-board-ddr4-1600MTs.dtsi"
+#include "k3-am654-ddr.dtsi"
+
+/ {
+	compatible =  "ti,am654-evm", "ti,am654";
+	model = "Texas Instruments AM654 R5 Base Board";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a53_0;
+	};
+
+	a53_0: a53@0 {
+		compatible = "ti,am654-rproc";
+		reg = <0x0 0x00a90000 0x0 0x10>;
+		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 202 TI_SCI_PD_EXCLUSIVE>;
+		resets = <&k3_reset 202 0>;
+		clocks = <&k3_clks 61 0>;
+		assigned-clocks = <&k3_clks 202 0>;
+		assigned-clock-rates = <800000000>;
+		ti,sci = <&dmsc>;
+		ti,sci-proc-id = <32>;
+		ti,sci-host-id = <10>;
+		u-boot,dm-spl;
+	};
+
+	vtt_supply: vtt_supply {
+		compatible = "regulator-gpio";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
+		states = <0 0x0 3300000 0x1>;
+		u-boot,dm-spl;
+	};
+};
+
+&cbass_main {
+	timer1: timer@40400000 {
+		compatible = "ti,omap5430-timer";
+		reg = <0x0 0x40400000 0x0 0x80>;
+		ti,timer-alwon;
+		clock-frequency = <25000000>;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&cbass_mcu {
+	mcu_secproxy: secproxy@28380000 {
+		compatible = "ti,am654-secure-proxy";
+		reg = <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>,
+		      <0x0 0x2a480000 0x0 0x80000>;
+		reg-names = "rt", "scfg", "target_data";
+		#mbox-cells = <1>;
+		u-boot,dm-spl;
+	};
+};
+
+&wkup_gpio0 {
+	u-boot,dm-spl;
+};
+
+&cbass_wakeup {
+	sysctrler: sysctrler {
+		compatible = "ti,am654-system-controller";
+		mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
+		mbox-names = "tx", "rx";
+		u-boot,dm-spl;
+	};
+
+	clk_200mhz: dummy_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		u-boot,dm-spl;
+	};
+};
+
+&dmsc {
+	mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
+	mbox-names = "tx", "rx", "notify";
+	ti,host-id = <4>;
+	ti,secure-host;
+};
+
+&wkup_uart0 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "okay";
+};
+
+&mcu_uart0 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	clock-frequency = <48000000>;
+	/delete-property/ power-domains;
+	status = "okay";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+	status = "okay";
+};
+
+&wkup_vtm0 {
+	compatible = "ti,am654-vtm", "ti,am654-avs";
+	vdd-supply-3 = <&vdd_mpu>;
+	vdd-supply-4 = <&vdd_mpu>;
+	u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+	wkup_uart0_pins_default: wkup_uart0_pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0)	/* (AB1) WKUP_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0)	/* (AB5) WKUP_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1)	/* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1)	/* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+		>;
+		u-boot,dm-spl;
+	};
+
+	wkup_vtt_pins_default: wkup_vtt_pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7)	/* WKUP_GPIO0_28 */
+		>;
+		u-boot,dm-spl;
+	};
+
+	mcu_uart0_pins_default: mcu_uart0_pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)	/* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)	/* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)	/* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)	/* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
+		>;
+		u-boot,dm-spl;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* (T2) MCU_OSPI0_D2 */
+			AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* (T3) MCU_OSPI0_D3 */
+			AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* (T4) MCU_OSPI0_D4 */
+			AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* (T5) MCU_OSPI0_D5 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* (R2) MCU_OSPI0_D6 */
+			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+		>;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01e4, PIN_INPUT, 0)	/* (AF11) UART0_RXD */
+			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)	/* (AE11) UART0_TXD */
+			AM65X_IOPAD(0x01ec, PIN_INPUT, 0)	/* (AG11) UART0_CTSn */
+			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)	/* (AD11) UART0_RTSn */
+		>;
+		u-boot,dm-spl;
+	};
+
+	main_mmc0_pins_default: main_mmc0_pins_default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)	/* (B25) MMC0_CLK */
+			AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0)	/* (B27) MMC0_CMD */
+			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0)	/* (A26) MMC0_DAT0 */
+			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0)	/* (E25) MMC0_DAT1 */
+			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0)	/* (C26) MMC0_DAT2 */
+			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0)	/* (A25) MMC0_DAT3 */
+			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0)	/* (E24) MMC0_DAT4 */
+			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0)	/* (A24) MMC0_DAT5 */
+			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0)	/* (B26) MMC0_DAT6 */
+			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0)	/* (D25) MMC0_DAT7 */
+			AM65X_IOPAD(0x01b0, PIN_INPUT, 0)		/* (C25) MMC0_DS */
+		>;
+		u-boot,dm-spl;
+	};
+
+	main_mmc1_pins_default: main_mmc1_pins_default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0)	/* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0)	/* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0)	/* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0)	/* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0)	/* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0)	/* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0)	/* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT, 0)		/* (C24) MMC1_SDWP */
+		>;
+		u-boot,dm-spl;
+	};
+};
+
+&memorycontroller {
+	vtt-supply = <&vtt_supply>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_vtt_pins_default>;
+};
+
+&sdhci0 {
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	/delete-property/ power-domains;
+	ti,driver-strength-ohm = <50>;
+};
+
+&sdhci1 {
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	/delete-property/ power-domains;
+	ti,driver-strength-ohm = <50>;
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	u-boot,dm-spl;
+
+	vdd_mpu: tps62363@60 {
+		compatible = "ti,tps62363";
+		reg = <0x60>;
+		regulator-name = "VDD_MPU";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1770000>;
+		regulator-always-on;
+		regulator-boot-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		u-boot,dm-spl;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	reg = <0x0 0x47040000 0x0 0x100>,
+	      <0x0 0x50000000 0x0 0x8000000>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <50000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+	usb0_pins_default: usb0_pins_default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
+		>;
+		u-boot,dm-spl;
+	};
+};
+
+&dwc3_0 {
+	status = "okay";
+	u-boot,dm-spl;
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+};
+
+&usb0_phy {
+	status = "okay";
+	u-boot,dm-spl;
+	/delete-property/ clocks;
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_default>;
+	dr_mode = "peripheral";
+	u-boot,dm-spl;
+};
+
+&scm_conf {
+	u-boot,dm-spl;
+};
+
+#include "k3-am654-base-board-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/k3-am654.dtsi b/roms/u-boot/arch/arm/dts/k3-am654.dtsi
new file mode 100644
index 000000000..f0a6541b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-am654.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC family in Quad core configuration
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1: cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu3: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	L2_1: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/roms/u-boot/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
new file mode 100644
index 000000000..bd037be35
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &mcu_i2c1;
+		i2c3 = &main_i2c0;
+	};
+};
+
+&cbass_main {
+	u-boot,dm-spl;
+};
+
+&main_navss {
+	u-boot,dm-spl;
+};
+
+&cbass_mcu_wakeup {
+	u-boot,dm-spl;
+
+	timer1: timer@40400000 {
+		compatible = "ti,omap5430-timer";
+		reg = <0x0 0x40400000 0x0 0x80>;
+		ti,timer-alwon;
+		clock-frequency = <25000000>;
+		u-boot,dm-spl;
+	};
+
+	chipid@43000014 {
+		u-boot,dm-spl;
+	};
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&dmsc {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_uart0 {
+	u-boot,dm-spl;
+};
+
+&mcu_uart0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci1 {
+	u-boot,dm-spl;
+};
+
+&wkup_i2c0_pins_default {
+	u-boot,dm-spl;
+};
+
+&wkup_i2c0 {
+	u-boot,dm-spl;
+};
+
+&main_i2c0 {
+	u-boot,dm-spl;
+};
+
+&main_i2c0_pins_default {
+	u-boot,dm-spl;
+};
+
+&exp2 {
+	u-boot,dm-spl;
+};
+
+&mcu_cpsw {
+	reg = <0x0 0x46000000 0x0 0x200000>,
+	      <0x0 0x40f00200 0x0 0x8>;
+	reg-names = "cpsw_nuss", "mac_efuse";
+	/delete-property/ ranges;
+
+	cpsw-phy-sel@40f04040 {
+		compatible = "ti,am654-cpsw-phy-sel";
+		reg= <0x0 0x40f04040 0x0 0x4>;
+		reg-names = "gmii-sel";
+	};
+};
+
+&main_usbss0_pins_default {
+	u-boot,dm-spl;
+};
+
+&usbss0 {
+	u-boot,dm-spl;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	u-boot,dm-spl;
+};
+
+&wkup_gpio_pins_default {
+	u-boot,dm-spl;
+};
+
+&mcu_fss0_hpb0_pins_default {
+	u-boot,dm-spl;
+};
+
+&fss {
+	u-boot,dm-spl;
+};
+
+&hbmc {
+	u-boot,dm-spl;
+
+	flash@0,0 {
+		u-boot,dm-spl;
+	};
+};
+
+&hbmc_mux {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j7200-common-proc-board.dts b/roms/u-boot/arch/arm/dts/k3-j7200-common-proc-board.dts
new file mode 100644
index 000000000..5120711d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j7200-common-proc-board.dts
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/mux/ti-serdes.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	aliases {
+		remoteproc0 = &mcu_r5fss0_core0;
+		remoteproc1 = &mcu_r5fss0_core1;
+		remoteproc2 = &main_r5fss0_core0;
+		remoteproc3 = &main_r5fss0_core1;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: gpio-regulator-vdd-sd-dv {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_sd_dv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpios = <&main_gpio0 55 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0
+			  3300000 0x1>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+		>;
+	};
+
+	wkup_gpio_pins_default: wkup-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xd8, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+			J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */
+			J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
+			J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
+			J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */
+			J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */
+			J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */
+			J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */
+			J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd_sd_dv_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+};
+
+&main_uart0 {
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart2 {
+	/* MAIN UART 2 is used by R5F firmware */
+	status = "reserved";
+};
+
+&main_uart3 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart4 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart5 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart6 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart7 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart8 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart9 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+/*
+ * The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be
+ * swapped on the CPB.
+ *
+ * main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3.
+ * The i2c1 of the CPB (as it is labeled) is not connected to j7200.
+ */
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn",
+				  "UB926_LOCK", "UB926_PWR_SW_CNTRL",
+				  "UB926_TUNER_RESET", "UB926_GPIO_SPARE", "";
+	};
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD card */
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
+};
+
+&usb_serdes_mux {
+	idle-states = <1>; /* USB0 to SERDES lane 3 */
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&tscadc0 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi b/roms/u-boot/arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
new file mode 100644
index 000000000..12ffd913d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
@@ -0,0 +1,2195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This file was generated by the AM752x_DRA82x_TDA4x_DDRSS_RegConfigTool, Revision: 0.3.0
+ * This file was generated on 06/08/2020
+ * Includes hand edits
+ */
+
+#define DDRSS_PLL_FHS_CNT 10
+#define DDRSS_PLL_FREQUENCY_1 400000000
+#define DDRSS_PLL_FREQUENCY_2 400000000
+
+#define DDRSS_CTL_00_DATA 0x00000B00
+#define DDRSS_CTL_01_DATA 0x00000000
+#define DDRSS_CTL_02_DATA 0x00000000
+#define DDRSS_CTL_03_DATA 0x00000000
+#define DDRSS_CTL_04_DATA 0x00000000
+#define DDRSS_CTL_05_DATA 0x00000000
+#define DDRSS_CTL_06_DATA 0x00000000
+#define DDRSS_CTL_07_DATA 0x00002710
+#define DDRSS_CTL_08_DATA 0x000186A0
+#define DDRSS_CTL_09_DATA 0x00000005
+#define DDRSS_CTL_10_DATA 0x00000064
+#define DDRSS_CTL_11_DATA 0x00027100
+#define DDRSS_CTL_12_DATA 0x00186A00
+#define DDRSS_CTL_13_DATA 0x00000005
+#define DDRSS_CTL_14_DATA 0x00000640
+#define DDRSS_CTL_15_DATA 0x00027100
+#define DDRSS_CTL_16_DATA 0x00186A00
+#define DDRSS_CTL_17_DATA 0x00000005
+#define DDRSS_CTL_18_DATA 0x00000640
+#define DDRSS_CTL_19_DATA 0x01010000
+#define DDRSS_CTL_20_DATA 0x02011001
+#define DDRSS_CTL_21_DATA 0x02010000
+#define DDRSS_CTL_22_DATA 0x00020100
+#define DDRSS_CTL_23_DATA 0x0000000A
+#define DDRSS_CTL_24_DATA 0x00000019
+#define DDRSS_CTL_25_DATA 0x00000000
+#define DDRSS_CTL_26_DATA 0x00000000
+#define DDRSS_CTL_27_DATA 0x02020200
+#define DDRSS_CTL_28_DATA 0x00002020
+#define DDRSS_CTL_29_DATA 0x00100000
+#define DDRSS_CTL_30_DATA 0x00000000
+#define DDRSS_CTL_31_DATA 0x00000000
+#define DDRSS_CTL_32_DATA 0x00000000
+#define DDRSS_CTL_33_DATA 0x00000000
+#define DDRSS_CTL_34_DATA 0x040C0000
+#define DDRSS_CTL_35_DATA 0x081C081C
+#define DDRSS_CTL_36_DATA 0x00050804
+#define DDRSS_CTL_37_DATA 0x09040008
+#define DDRSS_CTL_38_DATA 0x08000204
+#define DDRSS_CTL_39_DATA 0x0B240034
+#define DDRSS_CTL_40_DATA 0x08001910
+#define DDRSS_CTL_41_DATA 0x0B240034
+#define DDRSS_CTL_42_DATA 0x20001910
+#define DDRSS_CTL_43_DATA 0x000A0A09
+#define DDRSS_CTL_44_DATA 0x040006DB
+#define DDRSS_CTL_45_DATA 0x0C0A0904
+#define DDRSS_CTL_46_DATA 0x06006DB0
+#define DDRSS_CTL_47_DATA 0x0C0A0906
+#define DDRSS_CTL_48_DATA 0x06006DB0
+#define DDRSS_CTL_49_DATA 0x02030406
+#define DDRSS_CTL_50_DATA 0x11040500
+#define DDRSS_CTL_51_DATA 0x08121112
+#define DDRSS_CTL_52_DATA 0x14000D0A
+#define DDRSS_CTL_53_DATA 0x02010A0A
+#define DDRSS_CTL_54_DATA 0x01010002
+#define DDRSS_CTL_55_DATA 0x04222208
+#define DDRSS_CTL_56_DATA 0x04131304
+#define DDRSS_CTL_57_DATA 0x00001313
+#define DDRSS_CTL_58_DATA 0x00010100
+#define DDRSS_CTL_59_DATA 0x03010000
+#define DDRSS_CTL_60_DATA 0x00000E08
+#define DDRSS_CTL_61_DATA 0x000000BB
+#define DDRSS_CTL_62_DATA 0x000000E0
+#define DDRSS_CTL_63_DATA 0x00000C28
+#define DDRSS_CTL_64_DATA 0x000000E0
+#define DDRSS_CTL_65_DATA 0x00000C28
+#define DDRSS_CTL_66_DATA 0x00000005
+#define DDRSS_CTL_67_DATA 0x00030000
+#define DDRSS_CTL_68_DATA 0x00380010
+#define DDRSS_CTL_69_DATA 0x0038017E
+#define DDRSS_CTL_70_DATA 0x0040017E
+#define DDRSS_CTL_71_DATA 0x00120103
+#define DDRSS_CTL_72_DATA 0x00060005
+#define DDRSS_CTL_73_DATA 0x14080006
+#define DDRSS_CTL_74_DATA 0x05050114
+#define DDRSS_CTL_75_DATA 0x0201030A
+#define DDRSS_CTL_76_DATA 0x030C0605
+#define DDRSS_CTL_77_DATA 0x06050201
+#define DDRSS_CTL_78_DATA 0x0001030C
+#define DDRSS_CTL_79_DATA 0x000F000F
+#define DDRSS_CTL_80_DATA 0x00E600E6
+#define DDRSS_CTL_81_DATA 0x00E600E6
+#define DDRSS_CTL_82_DATA 0x03050505
+#define DDRSS_CTL_83_DATA 0x03010303
+#define DDRSS_CTL_84_DATA 0x0C050605
+#define DDRSS_CTL_85_DATA 0x03020603
+#define DDRSS_CTL_86_DATA 0x0C050605
+#define DDRSS_CTL_87_DATA 0x03020603
+#define DDRSS_CTL_88_DATA 0x03010000
+#define DDRSS_CTL_89_DATA 0x00010000
+#define DDRSS_CTL_90_DATA 0x00000000
+#define DDRSS_CTL_91_DATA 0x00000000
+#define DDRSS_CTL_92_DATA 0x01000000
+#define DDRSS_CTL_93_DATA 0x80104002
+#define DDRSS_CTL_94_DATA 0x00000000
+#define DDRSS_CTL_95_DATA 0x00040005
+#define DDRSS_CTL_96_DATA 0x00000000
+#define DDRSS_CTL_97_DATA 0x00050000
+#define DDRSS_CTL_98_DATA 0x00000004
+#define DDRSS_CTL_99_DATA 0x00000000
+#define DDRSS_CTL_100_DATA 0x00040005
+#define DDRSS_CTL_101_DATA 0x00000000
+#define DDRSS_CTL_102_DATA 0x00002EC0
+#define DDRSS_CTL_103_DATA 0x00002EC0
+#define DDRSS_CTL_104_DATA 0x00002EC0
+#define DDRSS_CTL_105_DATA 0x00002EC0
+#define DDRSS_CTL_106_DATA 0x00002EC0
+#define DDRSS_CTL_107_DATA 0x00000000
+#define DDRSS_CTL_108_DATA 0x0000051D
+#define DDRSS_CTL_109_DATA 0x00030A00
+#define DDRSS_CTL_110_DATA 0x00030A00
+#define DDRSS_CTL_111_DATA 0x00030A00
+#define DDRSS_CTL_112_DATA 0x00030A00
+#define DDRSS_CTL_113_DATA 0x00030A00
+#define DDRSS_CTL_114_DATA 0x00000000
+#define DDRSS_CTL_115_DATA 0x00005518
+#define DDRSS_CTL_116_DATA 0x00030A00
+#define DDRSS_CTL_117_DATA 0x00030A00
+#define DDRSS_CTL_118_DATA 0x00030A00
+#define DDRSS_CTL_119_DATA 0x00030A00
+#define DDRSS_CTL_120_DATA 0x00030A00
+#define DDRSS_CTL_121_DATA 0x00000000
+#define DDRSS_CTL_122_DATA 0x00005518
+#define DDRSS_CTL_123_DATA 0x00000000
+#define DDRSS_CTL_124_DATA 0x00000000
+#define DDRSS_CTL_125_DATA 0x00000000
+#define DDRSS_CTL_126_DATA 0x00000000
+#define DDRSS_CTL_127_DATA 0x00000000
+#define DDRSS_CTL_128_DATA 0x00000000
+#define DDRSS_CTL_129_DATA 0x00000000
+#define DDRSS_CTL_130_DATA 0x00000000
+#define DDRSS_CTL_131_DATA 0x05030500
+#define DDRSS_CTL_132_DATA 0x00030503
+#define DDRSS_CTL_133_DATA 0x0A090000
+#define DDRSS_CTL_134_DATA 0x0A090701
+#define DDRSS_CTL_135_DATA 0x0900000E
+#define DDRSS_CTL_136_DATA 0x0907010A
+#define DDRSS_CTL_137_DATA 0x00000E0A
+#define DDRSS_CTL_138_DATA 0x07010A09
+#define DDRSS_CTL_139_DATA 0x000E0A09
+#define DDRSS_CTL_140_DATA 0x07000401
+#define DDRSS_CTL_141_DATA 0x00000000
+#define DDRSS_CTL_142_DATA 0x00000000
+#define DDRSS_CTL_143_DATA 0x00000000
+#define DDRSS_CTL_144_DATA 0x00000000
+#define DDRSS_CTL_145_DATA 0x00000000
+#define DDRSS_CTL_146_DATA 0x00000000
+#define DDRSS_CTL_147_DATA 0x00000000
+#define DDRSS_CTL_148_DATA 0x08080000
+#define DDRSS_CTL_149_DATA 0x01000000
+#define DDRSS_CTL_150_DATA 0x800000C0
+#define DDRSS_CTL_151_DATA 0x800000C0
+#define DDRSS_CTL_152_DATA 0x800000C0
+#define DDRSS_CTL_153_DATA 0x00000000
+#define DDRSS_CTL_154_DATA 0x00001500
+#define DDRSS_CTL_155_DATA 0x00000000
+#define DDRSS_CTL_156_DATA 0x00000001
+#define DDRSS_CTL_157_DATA 0x00000002
+#define DDRSS_CTL_158_DATA 0x0000100E
+#define DDRSS_CTL_159_DATA 0x00000000
+#define DDRSS_CTL_160_DATA 0x00000000
+#define DDRSS_CTL_161_DATA 0x00000000
+#define DDRSS_CTL_162_DATA 0x00000000
+#define DDRSS_CTL_163_DATA 0x00000000
+#define DDRSS_CTL_164_DATA 0x000A0000
+#define DDRSS_CTL_165_DATA 0x000D0005
+#define DDRSS_CTL_166_DATA 0x000D0404
+#define DDRSS_CTL_167_DATA 0x005000A0
+#define DDRSS_CTL_168_DATA 0x060600C8
+#define DDRSS_CTL_169_DATA 0x00A000C8
+#define DDRSS_CTL_170_DATA 0x00C80050
+#define DDRSS_CTL_171_DATA 0x00C80606
+#define DDRSS_CTL_172_DATA 0x00000000
+#define DDRSS_CTL_173_DATA 0x00000000
+#define DDRSS_CTL_174_DATA 0x00000000
+#define DDRSS_CTL_175_DATA 0x12A40084
+#define DDRSS_CTL_176_DATA 0x2B0012A4
+#define DDRSS_CTL_177_DATA 0x00002B2B
+#define DDRSS_CTL_178_DATA 0x36000000
+#define DDRSS_CTL_179_DATA 0x27270036
+#define DDRSS_CTL_180_DATA 0x0F0F0000
+#define DDRSS_CTL_181_DATA 0x00000000
+#define DDRSS_CTL_182_DATA 0x00841515
+#define DDRSS_CTL_183_DATA 0x12A412A4
+#define DDRSS_CTL_184_DATA 0x2B2B2B00
+#define DDRSS_CTL_185_DATA 0x00000000
+#define DDRSS_CTL_186_DATA 0x00363600
+#define DDRSS_CTL_187_DATA 0x00002727
+#define DDRSS_CTL_188_DATA 0x00000F0F
+#define DDRSS_CTL_189_DATA 0x15150000
+#define DDRSS_CTL_190_DATA 0x00000020
+#define DDRSS_CTL_191_DATA 0x00000000
+#define DDRSS_CTL_192_DATA 0x00000001
+#define DDRSS_CTL_193_DATA 0x00000000
+#define DDRSS_CTL_194_DATA 0x01000000
+#define DDRSS_CTL_195_DATA 0x00000001
+#define DDRSS_CTL_196_DATA 0x00000000
+#define DDRSS_CTL_197_DATA 0x00000000
+#define DDRSS_CTL_198_DATA 0x00000000
+#define DDRSS_CTL_199_DATA 0x00000000
+#define DDRSS_CTL_200_DATA 0x00000000
+#define DDRSS_CTL_201_DATA 0x00000000
+#define DDRSS_CTL_202_DATA 0x00000000
+#define DDRSS_CTL_203_DATA 0x00000000
+#define DDRSS_CTL_204_DATA 0x00000000
+#define DDRSS_CTL_205_DATA 0x00000000
+#define DDRSS_CTL_206_DATA 0x02000000
+#define DDRSS_CTL_207_DATA 0x01080101
+#define DDRSS_CTL_208_DATA 0x00000000
+#define DDRSS_CTL_209_DATA 0x00000000
+#define DDRSS_CTL_210_DATA 0x00000000
+#define DDRSS_CTL_211_DATA 0x00000000
+#define DDRSS_CTL_212_DATA 0x00000000
+#define DDRSS_CTL_213_DATA 0x00000000
+#define DDRSS_CTL_214_DATA 0x00000000
+#define DDRSS_CTL_215_DATA 0x00000000
+#define DDRSS_CTL_216_DATA 0x00000000
+#define DDRSS_CTL_217_DATA 0x00000000
+#define DDRSS_CTL_218_DATA 0x00000000
+#define DDRSS_CTL_219_DATA 0x00000000
+#define DDRSS_CTL_220_DATA 0x00000000
+#define DDRSS_CTL_221_DATA 0x00000000
+#define DDRSS_CTL_222_DATA 0x00001000
+#define DDRSS_CTL_223_DATA 0x006403E8
+#define DDRSS_CTL_224_DATA 0x00000000
+#define DDRSS_CTL_225_DATA 0x00000000
+#define DDRSS_CTL_226_DATA 0x00000000
+#define DDRSS_CTL_227_DATA 0x15110000
+#define DDRSS_CTL_228_DATA 0x00040C18
+#define DDRSS_CTL_229_DATA 0x00000000
+#define DDRSS_CTL_230_DATA 0x00000000
+#define DDRSS_CTL_231_DATA 0x00000000
+#define DDRSS_CTL_232_DATA 0x00000000
+#define DDRSS_CTL_233_DATA 0x00000000
+#define DDRSS_CTL_234_DATA 0x00000000
+#define DDRSS_CTL_235_DATA 0x00000000
+#define DDRSS_CTL_236_DATA 0x00000000
+#define DDRSS_CTL_237_DATA 0x00000000
+#define DDRSS_CTL_238_DATA 0x00000000
+#define DDRSS_CTL_239_DATA 0x00000000
+#define DDRSS_CTL_240_DATA 0x00000000
+#define DDRSS_CTL_241_DATA 0x00000000
+#define DDRSS_CTL_242_DATA 0x00030000
+#define DDRSS_CTL_243_DATA 0x00000000
+#define DDRSS_CTL_244_DATA 0x00000000
+#define DDRSS_CTL_245_DATA 0x00000000
+#define DDRSS_CTL_246_DATA 0x00000000
+#define DDRSS_CTL_247_DATA 0x00000000
+#define DDRSS_CTL_248_DATA 0x00000000
+#define DDRSS_CTL_249_DATA 0x00000000
+#define DDRSS_CTL_250_DATA 0x00000000
+#define DDRSS_CTL_251_DATA 0x00000000
+#define DDRSS_CTL_252_DATA 0x00000000
+#define DDRSS_CTL_253_DATA 0x00000000
+#define DDRSS_CTL_254_DATA 0x00000000
+#define DDRSS_CTL_255_DATA 0x00000000
+#define DDRSS_CTL_256_DATA 0x00000000
+#define DDRSS_CTL_257_DATA 0x01000200
+#define DDRSS_CTL_258_DATA 0x00320040
+#define DDRSS_CTL_259_DATA 0x00020008
+#define DDRSS_CTL_260_DATA 0x00400100
+#define DDRSS_CTL_261_DATA 0x00180320
+#define DDRSS_CTL_262_DATA 0x01000200
+#define DDRSS_CTL_263_DATA 0x03200040
+#define DDRSS_CTL_264_DATA 0x00000018
+#define DDRSS_CTL_265_DATA 0x00280003
+#define DDRSS_CTL_266_DATA 0x01000028
+#define DDRSS_CTL_267_DATA 0x00000000
+#define DDRSS_CTL_268_DATA 0x01010000
+#define DDRSS_CTL_269_DATA 0x00000202
+#define DDRSS_CTL_270_DATA 0x00000FFF
+#define DDRSS_CTL_271_DATA 0x1FFF1000
+#define DDRSS_CTL_272_DATA 0x01FF0000
+#define DDRSS_CTL_273_DATA 0x000101FF
+#define DDRSS_CTL_274_DATA 0x0FFF0B00
+#define DDRSS_CTL_275_DATA 0x01010001
+#define DDRSS_CTL_276_DATA 0x01010101
+#define DDRSS_CTL_277_DATA 0x01180101
+#define DDRSS_CTL_278_DATA 0x00030000
+#define DDRSS_CTL_279_DATA 0x00000000
+#define DDRSS_CTL_280_DATA 0x00000000
+#define DDRSS_CTL_281_DATA 0x00000000
+#define DDRSS_CTL_282_DATA 0x00000000
+#define DDRSS_CTL_283_DATA 0x00000000
+#define DDRSS_CTL_284_DATA 0x00000000
+#define DDRSS_CTL_285_DATA 0x00000000
+#define DDRSS_CTL_286_DATA 0x00040101
+#define DDRSS_CTL_287_DATA 0x04010100
+#define DDRSS_CTL_288_DATA 0x00000000
+#define DDRSS_CTL_289_DATA 0x00000000
+#define DDRSS_CTL_290_DATA 0x03030300
+#define DDRSS_CTL_291_DATA 0x00000001
+#define DDRSS_CTL_292_DATA 0x00000000
+#define DDRSS_CTL_293_DATA 0x00000000
+#define DDRSS_CTL_294_DATA 0x00000000
+#define DDRSS_CTL_295_DATA 0x00000000
+#define DDRSS_CTL_296_DATA 0x00000000
+#define DDRSS_CTL_297_DATA 0x00000000
+#define DDRSS_CTL_298_DATA 0x00000000
+#define DDRSS_CTL_299_DATA 0x00000000
+#define DDRSS_CTL_300_DATA 0x00000000
+#define DDRSS_CTL_301_DATA 0x00000000
+#define DDRSS_CTL_302_DATA 0x00000000
+#define DDRSS_CTL_303_DATA 0x00000000
+#define DDRSS_CTL_304_DATA 0x00000000
+#define DDRSS_CTL_305_DATA 0x00000000
+#define DDRSS_CTL_306_DATA 0x00000000
+#define DDRSS_CTL_307_DATA 0x00000000
+#define DDRSS_CTL_308_DATA 0x00000000
+#define DDRSS_CTL_309_DATA 0x00000000
+#define DDRSS_CTL_310_DATA 0x00000000
+#define DDRSS_CTL_311_DATA 0x00000000
+#define DDRSS_CTL_312_DATA 0x00000000
+#define DDRSS_CTL_313_DATA 0x01000000
+#define DDRSS_CTL_314_DATA 0x00020201
+#define DDRSS_CTL_315_DATA 0x01000101
+#define DDRSS_CTL_316_DATA 0x01010001
+#define DDRSS_CTL_317_DATA 0x00010101
+#define DDRSS_CTL_318_DATA 0x05050503
+#define DDRSS_CTL_319_DATA 0x08080C0C
+#define DDRSS_CTL_320_DATA 0x00090308
+#define DDRSS_CTL_321_DATA 0x000C030F
+#define DDRSS_CTL_322_DATA 0x000C0311
+#define DDRSS_CTL_323_DATA 0x0C090011
+#define DDRSS_CTL_324_DATA 0x0100000C
+#define DDRSS_CTL_325_DATA 0x03020301
+#define DDRSS_CTL_326_DATA 0x00000002
+#define DDRSS_CTL_327_DATA 0x00000000
+#define DDRSS_CTL_328_DATA 0x00010000
+#define DDRSS_CTL_329_DATA 0x00280D00
+#define DDRSS_CTL_330_DATA 0x00000001
+#define DDRSS_CTL_331_DATA 0x00030001
+#define DDRSS_CTL_332_DATA 0x00000000
+#define DDRSS_CTL_333_DATA 0x00000000
+#define DDRSS_CTL_334_DATA 0x00000000
+#define DDRSS_CTL_335_DATA 0x00000000
+#define DDRSS_CTL_336_DATA 0x00000000
+#define DDRSS_CTL_337_DATA 0x00000000
+#define DDRSS_CTL_338_DATA 0x00000000
+#define DDRSS_CTL_339_DATA 0x00000000
+#define DDRSS_CTL_340_DATA 0x01000000
+#define DDRSS_CTL_341_DATA 0x00000001
+#define DDRSS_CTL_342_DATA 0x00010100
+#define DDRSS_CTL_343_DATA 0x03030000
+#define DDRSS_CTL_344_DATA 0x00000000
+#define DDRSS_CTL_345_DATA 0x00000000
+#define DDRSS_CTL_346_DATA 0x00000000
+#define DDRSS_CTL_347_DATA 0x00000000
+#define DDRSS_CTL_348_DATA 0x00000000
+#define DDRSS_CTL_349_DATA 0x00000000
+#define DDRSS_CTL_350_DATA 0x00000000
+#define DDRSS_CTL_351_DATA 0x00000000
+#define DDRSS_CTL_352_DATA 0x00000000
+#define DDRSS_CTL_353_DATA 0x00000000
+#define DDRSS_CTL_354_DATA 0x00000000
+#define DDRSS_CTL_355_DATA 0x00000000
+#define DDRSS_CTL_356_DATA 0x00000000
+#define DDRSS_CTL_357_DATA 0x00000000
+#define DDRSS_CTL_358_DATA 0x00000000
+#define DDRSS_CTL_359_DATA 0x00000000
+#define DDRSS_CTL_360_DATA 0x000556AA
+#define DDRSS_CTL_361_DATA 0x000AAAAA
+#define DDRSS_CTL_362_DATA 0x000AA955
+#define DDRSS_CTL_363_DATA 0x00055555
+#define DDRSS_CTL_364_DATA 0x000B3133
+#define DDRSS_CTL_365_DATA 0x0004CD33
+#define DDRSS_CTL_366_DATA 0x0004CECC
+#define DDRSS_CTL_367_DATA 0x000B32CC
+#define DDRSS_CTL_368_DATA 0x00010300
+#define DDRSS_CTL_369_DATA 0x03000100
+#define DDRSS_CTL_370_DATA 0x00000000
+#define DDRSS_CTL_371_DATA 0x00000000
+#define DDRSS_CTL_372_DATA 0x00000000
+#define DDRSS_CTL_373_DATA 0x00000000
+#define DDRSS_CTL_374_DATA 0x00000000
+#define DDRSS_CTL_375_DATA 0x00000000
+#define DDRSS_CTL_376_DATA 0x00000000
+#define DDRSS_CTL_377_DATA 0x00010000
+#define DDRSS_CTL_378_DATA 0x00000404
+#define DDRSS_CTL_379_DATA 0x00000000
+#define DDRSS_CTL_380_DATA 0x00000000
+#define DDRSS_CTL_381_DATA 0x00000000
+#define DDRSS_CTL_382_DATA 0x00000000
+#define DDRSS_CTL_383_DATA 0x00000000
+#define DDRSS_CTL_384_DATA 0x00000000
+#define DDRSS_CTL_385_DATA 0x00000000
+#define DDRSS_CTL_386_DATA 0x00000000
+#define DDRSS_CTL_387_DATA 0x26261B00
+#define DDRSS_CTL_388_DATA 0x000A0000
+#define DDRSS_CTL_389_DATA 0x00000176
+#define DDRSS_CTL_390_DATA 0x00000200
+#define DDRSS_CTL_391_DATA 0x00000200
+#define DDRSS_CTL_392_DATA 0x00000200
+#define DDRSS_CTL_393_DATA 0x00000200
+#define DDRSS_CTL_394_DATA 0x00000462
+#define DDRSS_CTL_395_DATA 0x00000E9C
+#define DDRSS_CTL_396_DATA 0x00000204
+#define DDRSS_CTL_397_DATA 0x00001850
+#define DDRSS_CTL_398_DATA 0x00000200
+#define DDRSS_CTL_399_DATA 0x00000200
+#define DDRSS_CTL_400_DATA 0x00000200
+#define DDRSS_CTL_401_DATA 0x00000200
+#define DDRSS_CTL_402_DATA 0x000048F0
+#define DDRSS_CTL_403_DATA 0x0000F320
+#define DDRSS_CTL_404_DATA 0x00000408
+#define DDRSS_CTL_405_DATA 0x00001850
+#define DDRSS_CTL_406_DATA 0x00000200
+#define DDRSS_CTL_407_DATA 0x00000200
+#define DDRSS_CTL_408_DATA 0x00000200
+#define DDRSS_CTL_409_DATA 0x00000200
+#define DDRSS_CTL_410_DATA 0x000048F0
+#define DDRSS_CTL_411_DATA 0x0000F320
+#define DDRSS_CTL_412_DATA 0x02020408
+#define DDRSS_CTL_413_DATA 0x03030202
+#define DDRSS_CTL_414_DATA 0x00000022
+#define DDRSS_CTL_415_DATA 0x00000000
+#define DDRSS_CTL_416_DATA 0x00000000
+#define DDRSS_CTL_417_DATA 0x00001403
+#define DDRSS_CTL_418_DATA 0x000007D0
+#define DDRSS_CTL_419_DATA 0x00000000
+#define DDRSS_CTL_420_DATA 0x00000000
+#define DDRSS_CTL_421_DATA 0x00030000
+#define DDRSS_CTL_422_DATA 0x0006001E
+#define DDRSS_CTL_423_DATA 0x000E0026
+#define DDRSS_CTL_424_DATA 0x000E0026
+#define DDRSS_CTL_425_DATA 0x00000000
+#define DDRSS_CTL_426_DATA 0x00000000
+#define DDRSS_CTL_427_DATA 0x02000000
+#define DDRSS_CTL_428_DATA 0x01000404
+#define DDRSS_CTL_429_DATA 0x01080108
+#define DDRSS_CTL_430_DATA 0x00000105
+#define DDRSS_CTL_431_DATA 0x00010101
+#define DDRSS_CTL_432_DATA 0x00010101
+#define DDRSS_CTL_433_DATA 0x00010001
+#define DDRSS_CTL_434_DATA 0x00000101
+#define DDRSS_CTL_435_DATA 0x02000201
+#define DDRSS_CTL_436_DATA 0x02010000
+#define DDRSS_CTL_437_DATA 0x00000200
+#define DDRSS_CTL_438_DATA 0x10060000
+#define DDRSS_CTL_439_DATA 0x00000110
+#define DDRSS_CTL_440_DATA 0xFFFFFFFF
+#define DDRSS_CTL_441_DATA 0xFFFFFFFF
+#define DDRSS_CTL_442_DATA 0x00000000
+#define DDRSS_CTL_443_DATA 0x00000000
+#define DDRSS_CTL_444_DATA 0x00000000
+#define DDRSS_CTL_445_DATA 0x00000000
+#define DDRSS_CTL_446_DATA 0x00000000
+#define DDRSS_CTL_447_DATA 0x00000000
+#define DDRSS_CTL_448_DATA 0x00000000
+#define DDRSS_CTL_449_DATA 0x00000000
+#define DDRSS_CTL_450_DATA 0x00000000
+#define DDRSS_CTL_451_DATA 0x00000000
+#define DDRSS_CTL_452_DATA 0x00000000
+#define DDRSS_CTL_453_DATA 0x00000000
+#define DDRSS_CTL_454_DATA 0x00000000
+#define DDRSS_CTL_455_DATA 0x00000000
+#define DDRSS_CTL_456_DATA 0x00000000
+#define DDRSS_CTL_457_DATA 0x00000000
+#define DDRSS_CTL_458_DATA 0x00000000
+
+#define DDRSS_PI_00_DATA 0x00000B00
+#define DDRSS_PI_01_DATA 0x00000000
+#define DDRSS_PI_02_DATA 0x00000000
+#define DDRSS_PI_03_DATA 0x00000000
+#define DDRSS_PI_04_DATA 0x00000000
+#define DDRSS_PI_05_DATA 0x00000101
+#define DDRSS_PI_06_DATA 0x00640000
+#define DDRSS_PI_07_DATA 0x00000001
+#define DDRSS_PI_08_DATA 0x00000000
+#define DDRSS_PI_09_DATA 0x00000000
+#define DDRSS_PI_10_DATA 0x00000000
+#define DDRSS_PI_11_DATA 0x00000000
+#define DDRSS_PI_12_DATA 0x00000007
+#define DDRSS_PI_13_DATA 0x00010002
+#define DDRSS_PI_14_DATA 0x0800000F
+#define DDRSS_PI_15_DATA 0x00000103
+#define DDRSS_PI_16_DATA 0x00000005
+#define DDRSS_PI_17_DATA 0x00000000
+#define DDRSS_PI_18_DATA 0x00000000
+#define DDRSS_PI_19_DATA 0x00000000
+#define DDRSS_PI_20_DATA 0x00000000
+#define DDRSS_PI_21_DATA 0x00000000
+#define DDRSS_PI_22_DATA 0x00000000
+#define DDRSS_PI_23_DATA 0x00000000
+#define DDRSS_PI_24_DATA 0x00000000
+#define DDRSS_PI_25_DATA 0x00000000
+#define DDRSS_PI_26_DATA 0x00010100
+#define DDRSS_PI_27_DATA 0x00280A00
+#define DDRSS_PI_28_DATA 0x00000000
+#define DDRSS_PI_29_DATA 0x0F000000
+#define DDRSS_PI_30_DATA 0x00003200
+#define DDRSS_PI_31_DATA 0x00000000
+#define DDRSS_PI_32_DATA 0x00000000
+#define DDRSS_PI_33_DATA 0x01010102
+#define DDRSS_PI_34_DATA 0x00000000
+#define DDRSS_PI_35_DATA 0x000000AA
+#define DDRSS_PI_36_DATA 0x00000055
+#define DDRSS_PI_37_DATA 0x000000B5
+#define DDRSS_PI_38_DATA 0x0000004A
+#define DDRSS_PI_39_DATA 0x00000056
+#define DDRSS_PI_40_DATA 0x000000A9
+#define DDRSS_PI_41_DATA 0x000000A9
+#define DDRSS_PI_42_DATA 0x000000B5
+#define DDRSS_PI_43_DATA 0x00000000
+#define DDRSS_PI_44_DATA 0x00000000
+#define DDRSS_PI_45_DATA 0x000F0F00
+#define DDRSS_PI_46_DATA 0x00000015
+#define DDRSS_PI_47_DATA 0x000007D0
+#define DDRSS_PI_48_DATA 0x00000300
+#define DDRSS_PI_49_DATA 0x00000000
+#define DDRSS_PI_50_DATA 0x00000000
+#define DDRSS_PI_51_DATA 0x01000000
+#define DDRSS_PI_52_DATA 0x00010101
+#define DDRSS_PI_53_DATA 0x00000000
+#define DDRSS_PI_54_DATA 0x00030000
+#define DDRSS_PI_55_DATA 0x0F000000
+#define DDRSS_PI_56_DATA 0x00000017
+#define DDRSS_PI_57_DATA 0x00000000
+#define DDRSS_PI_58_DATA 0x00000000
+#define DDRSS_PI_59_DATA 0x00000000
+#define DDRSS_PI_60_DATA 0x0A0A140A
+#define DDRSS_PI_61_DATA 0x10020101
+#define DDRSS_PI_62_DATA 0x00020805
+#define DDRSS_PI_63_DATA 0x01000404
+#define DDRSS_PI_64_DATA 0x00000000
+#define DDRSS_PI_65_DATA 0x00000000
+#define DDRSS_PI_66_DATA 0x00000100
+#define DDRSS_PI_67_DATA 0x0001010F
+#define DDRSS_PI_68_DATA 0x00340000
+#define DDRSS_PI_69_DATA 0x00000000
+#define DDRSS_PI_70_DATA 0x00000000
+#define DDRSS_PI_71_DATA 0x0000FFFF
+#define DDRSS_PI_72_DATA 0x00000000
+#define DDRSS_PI_73_DATA 0x00080100
+#define DDRSS_PI_74_DATA 0x02000200
+#define DDRSS_PI_75_DATA 0x01000100
+#define DDRSS_PI_76_DATA 0x01000000
+#define DDRSS_PI_77_DATA 0x02000200
+#define DDRSS_PI_78_DATA 0x00000200
+#define DDRSS_PI_79_DATA 0x00000000
+#define DDRSS_PI_80_DATA 0x00000000
+#define DDRSS_PI_81_DATA 0x00000000
+#define DDRSS_PI_82_DATA 0x00000000
+#define DDRSS_PI_83_DATA 0x00000000
+#define DDRSS_PI_84_DATA 0x00000000
+#define DDRSS_PI_85_DATA 0x00000000
+#define DDRSS_PI_86_DATA 0x00000000
+#define DDRSS_PI_87_DATA 0x00000000
+#define DDRSS_PI_88_DATA 0x00000000
+#define DDRSS_PI_89_DATA 0x00000000
+#define DDRSS_PI_90_DATA 0x00000000
+#define DDRSS_PI_91_DATA 0x00000400
+#define DDRSS_PI_92_DATA 0x02010000
+#define DDRSS_PI_93_DATA 0x00080003
+#define DDRSS_PI_94_DATA 0x00080000
+#define DDRSS_PI_95_DATA 0x00000001
+#define DDRSS_PI_96_DATA 0x00000000
+#define DDRSS_PI_97_DATA 0x0000AA00
+#define DDRSS_PI_98_DATA 0x00000000
+#define DDRSS_PI_99_DATA 0x00000000
+#define DDRSS_PI_100_DATA 0x00010000
+#define DDRSS_PI_101_DATA 0x00000000
+#define DDRSS_PI_102_DATA 0x00000000
+#define DDRSS_PI_103_DATA 0x00000000
+#define DDRSS_PI_104_DATA 0x00000000
+#define DDRSS_PI_105_DATA 0x00000000
+#define DDRSS_PI_106_DATA 0x00000000
+#define DDRSS_PI_107_DATA 0x00000000
+#define DDRSS_PI_108_DATA 0x00000000
+#define DDRSS_PI_109_DATA 0x00000000
+#define DDRSS_PI_110_DATA 0x00000000
+#define DDRSS_PI_111_DATA 0x00000000
+#define DDRSS_PI_112_DATA 0x00000000
+#define DDRSS_PI_113_DATA 0x00000000
+#define DDRSS_PI_114_DATA 0x00000000
+#define DDRSS_PI_115_DATA 0x00000000
+#define DDRSS_PI_116_DATA 0x00000000
+#define DDRSS_PI_117_DATA 0x00000000
+#define DDRSS_PI_118_DATA 0x00000000
+#define DDRSS_PI_119_DATA 0x00000000
+#define DDRSS_PI_120_DATA 0x00000000
+#define DDRSS_PI_121_DATA 0x00000000
+#define DDRSS_PI_122_DATA 0x00000000
+#define DDRSS_PI_123_DATA 0x00000000
+#define DDRSS_PI_124_DATA 0x00000000
+#define DDRSS_PI_125_DATA 0x00000008
+#define DDRSS_PI_126_DATA 0x00000000
+#define DDRSS_PI_127_DATA 0x00000000
+#define DDRSS_PI_128_DATA 0x00000000
+#define DDRSS_PI_129_DATA 0x00000000
+#define DDRSS_PI_130_DATA 0x00000000
+#define DDRSS_PI_131_DATA 0x00000000
+#define DDRSS_PI_132_DATA 0x00000000
+#define DDRSS_PI_133_DATA 0x00000000
+#define DDRSS_PI_134_DATA 0x00000002
+#define DDRSS_PI_135_DATA 0x00000000
+#define DDRSS_PI_136_DATA 0x00000000
+#define DDRSS_PI_137_DATA 0x0000000A
+#define DDRSS_PI_138_DATA 0x00000019
+#define DDRSS_PI_139_DATA 0x00000100
+#define DDRSS_PI_140_DATA 0x00000000
+#define DDRSS_PI_141_DATA 0x00000000
+#define DDRSS_PI_142_DATA 0x00000000
+#define DDRSS_PI_143_DATA 0x00000000
+#define DDRSS_PI_144_DATA 0x01000000
+#define DDRSS_PI_145_DATA 0x00010003
+#define DDRSS_PI_146_DATA 0x02000101
+#define DDRSS_PI_147_DATA 0x01030001
+#define DDRSS_PI_148_DATA 0x00010400
+#define DDRSS_PI_149_DATA 0x06000105
+#define DDRSS_PI_150_DATA 0x01070001
+#define DDRSS_PI_151_DATA 0x00000000
+#define DDRSS_PI_152_DATA 0x00000000
+#define DDRSS_PI_153_DATA 0x00000000
+#define DDRSS_PI_154_DATA 0x00010001
+#define DDRSS_PI_155_DATA 0x00000000
+#define DDRSS_PI_156_DATA 0x00000000
+#define DDRSS_PI_157_DATA 0x00000000
+#define DDRSS_PI_158_DATA 0x00000000
+#define DDRSS_PI_159_DATA 0x00000401
+#define DDRSS_PI_160_DATA 0x00000000
+#define DDRSS_PI_161_DATA 0x00010000
+#define DDRSS_PI_162_DATA 0x00000000
+#define DDRSS_PI_163_DATA 0x10100100
+#define DDRSS_PI_164_DATA 0x00000034
+#define DDRSS_PI_165_DATA 0x00000043
+#define DDRSS_PI_166_DATA 0x00020043
+#define DDRSS_PI_167_DATA 0x02000200
+#define DDRSS_PI_168_DATA 0x1C080C04
+#define DDRSS_PI_169_DATA 0x000E1C08
+#define DDRSS_PI_170_DATA 0x000000BB
+#define DDRSS_PI_171_DATA 0x000000E0
+#define DDRSS_PI_172_DATA 0x00000C28
+#define DDRSS_PI_173_DATA 0x000000E0
+#define DDRSS_PI_174_DATA 0x04000C28
+#define DDRSS_PI_175_DATA 0x01010404
+#define DDRSS_PI_176_DATA 0x00001501
+#define DDRSS_PI_177_DATA 0x00150015
+#define DDRSS_PI_178_DATA 0x01000100
+#define DDRSS_PI_179_DATA 0x00000100
+#define DDRSS_PI_180_DATA 0x00000000
+#define DDRSS_PI_181_DATA 0x01010101
+#define DDRSS_PI_182_DATA 0x00000101
+#define DDRSS_PI_183_DATA 0x00000000
+#define DDRSS_PI_184_DATA 0x00000000
+#define DDRSS_PI_185_DATA 0x08040000
+#define DDRSS_PI_186_DATA 0x04040208
+#define DDRSS_PI_187_DATA 0x00040402
+#define DDRSS_PI_188_DATA 0x000C8034
+#define DDRSS_PI_189_DATA 0x0014003C
+#define DDRSS_PI_190_DATA 0x0014003C
+#define DDRSS_PI_191_DATA 0x01010101
+#define DDRSS_PI_192_DATA 0x0002000D
+#define DDRSS_PI_193_DATA 0x000200C8
+#define DDRSS_PI_194_DATA 0x010000C8
+#define DDRSS_PI_195_DATA 0x000E000E
+#define DDRSS_PI_196_DATA 0x00C90100
+#define DDRSS_PI_197_DATA 0x010000C9
+#define DDRSS_PI_198_DATA 0x00C900C9
+#define DDRSS_PI_199_DATA 0x32103200
+#define DDRSS_PI_200_DATA 0x01013210
+#define DDRSS_PI_201_DATA 0x0A070601
+#define DDRSS_PI_202_DATA 0x0D09070D
+#define DDRSS_PI_203_DATA 0x0D09070D
+#define DDRSS_PI_204_DATA 0x0000C00D
+#define DDRSS_PI_205_DATA 0x00C01000
+#define DDRSS_PI_206_DATA 0x00C01000
+#define DDRSS_PI_207_DATA 0x00021000
+#define DDRSS_PI_208_DATA 0x0016000D
+#define DDRSS_PI_209_DATA 0x001600C8
+#define DDRSS_PI_210_DATA 0x001100C8
+#define DDRSS_PI_211_DATA 0x32000056
+#define DDRSS_PI_212_DATA 0x00000301
+#define DDRSS_PI_213_DATA 0x00580020
+#define DDRSS_PI_214_DATA 0x03013212
+#define DDRSS_PI_215_DATA 0x00002000
+#define DDRSS_PI_216_DATA 0x32120058
+#define DDRSS_PI_217_DATA 0x09000301
+#define DDRSS_PI_218_DATA 0x04010504
+#define DDRSS_PI_219_DATA 0x0400062B
+#define DDRSS_PI_220_DATA 0x0A032001
+#define DDRSS_PI_221_DATA 0x1113090A
+#define DDRSS_PI_222_DATA 0x0000120C
+#define DDRSS_PI_223_DATA 0x240062B8
+#define DDRSS_PI_224_DATA 0x0C0C2003
+#define DDRSS_PI_225_DATA 0x1113090A
+#define DDRSS_PI_226_DATA 0x0000120C
+#define DDRSS_PI_227_DATA 0x240062B8
+#define DDRSS_PI_228_DATA 0x0C0C2003
+#define DDRSS_PI_229_DATA 0x0001760A
+#define DDRSS_PI_230_DATA 0x00000E9C
+#define DDRSS_PI_231_DATA 0x00001850
+#define DDRSS_PI_232_DATA 0x0000F320
+#define DDRSS_PI_233_DATA 0x00001850
+#define DDRSS_PI_234_DATA 0x0000F320
+#define DDRSS_PI_235_DATA 0x00E6000F
+#define DDRSS_PI_236_DATA 0x030300E6
+#define DDRSS_PI_237_DATA 0x00271003
+#define DDRSS_PI_238_DATA 0x000186A0
+#define DDRSS_PI_239_DATA 0x00000005
+#define DDRSS_PI_240_DATA 0x00000064
+#define DDRSS_PI_241_DATA 0x0000000F
+#define DDRSS_PI_242_DATA 0x00027100
+#define DDRSS_PI_243_DATA 0x000186A0
+#define DDRSS_PI_244_DATA 0x00000005
+#define DDRSS_PI_245_DATA 0x00000640
+#define DDRSS_PI_246_DATA 0x000000E6
+#define DDRSS_PI_247_DATA 0x00027100
+#define DDRSS_PI_248_DATA 0x000186A0
+#define DDRSS_PI_249_DATA 0x00000005
+#define DDRSS_PI_250_DATA 0x00000640
+#define DDRSS_PI_251_DATA 0x010000E6
+#define DDRSS_PI_252_DATA 0x00320040
+#define DDRSS_PI_253_DATA 0x00010008
+#define DDRSS_PI_254_DATA 0x03200040
+#define DDRSS_PI_255_DATA 0x00010018
+#define DDRSS_PI_256_DATA 0x03200040
+#define DDRSS_PI_257_DATA 0x00000318
+#define DDRSS_PI_258_DATA 0x00280028
+#define DDRSS_PI_259_DATA 0x00040404
+#define DDRSS_PI_260_DATA 0x00000055
+#define DDRSS_PI_261_DATA 0x55003C5A
+#define DDRSS_PI_262_DATA 0x5A000000
+#define DDRSS_PI_263_DATA 0x0055003C
+#define DDRSS_PI_264_DATA 0x3C5A0000
+#define DDRSS_PI_265_DATA 0x00005500
+#define DDRSS_PI_266_DATA 0x0C3C5A00
+#define DDRSS_PI_267_DATA 0x080F0E0D
+#define DDRSS_PI_268_DATA 0x000B0A09
+#define DDRSS_PI_269_DATA 0x00030201
+#define DDRSS_PI_270_DATA 0x01000000
+#define DDRSS_PI_271_DATA 0x04020201
+#define DDRSS_PI_272_DATA 0x00080804
+#define DDRSS_PI_273_DATA 0x00000000
+#define DDRSS_PI_274_DATA 0x00000000
+#define DDRSS_PI_275_DATA 0x002B0084
+#define DDRSS_PI_276_DATA 0x00150000
+#define DDRSS_PI_277_DATA 0x362B12A4
+#define DDRSS_PI_278_DATA 0x00150F27
+#define DDRSS_PI_279_DATA 0x362B12A4
+#define DDRSS_PI_280_DATA 0x00150F27
+#define DDRSS_PI_281_DATA 0x002B0084
+#define DDRSS_PI_282_DATA 0x00150000
+#define DDRSS_PI_283_DATA 0x362B12A4
+#define DDRSS_PI_284_DATA 0x00150F27
+#define DDRSS_PI_285_DATA 0x362B12A4
+#define DDRSS_PI_286_DATA 0x00150F27
+#define DDRSS_PI_287_DATA 0x002B0084
+#define DDRSS_PI_288_DATA 0x00150000
+#define DDRSS_PI_289_DATA 0x362B12A4
+#define DDRSS_PI_290_DATA 0x00150F27
+#define DDRSS_PI_291_DATA 0x362B12A4
+#define DDRSS_PI_292_DATA 0x00150F27
+#define DDRSS_PI_293_DATA 0x002B0084
+#define DDRSS_PI_294_DATA 0x00150000
+#define DDRSS_PI_295_DATA 0x362B12A4
+#define DDRSS_PI_296_DATA 0x00150F27
+#define DDRSS_PI_297_DATA 0x362B12A4
+#define DDRSS_PI_298_DATA 0x00150F27
+#define DDRSS_PI_299_DATA 0x00000000
+
+#define DDRSS_PHY_00_DATA 0x000004F0
+#define DDRSS_PHY_01_DATA 0x00000000
+#define DDRSS_PHY_02_DATA 0x00030200
+#define DDRSS_PHY_03_DATA 0x00000000
+#define DDRSS_PHY_04_DATA 0x00000000
+#define DDRSS_PHY_05_DATA 0x01030000
+#define DDRSS_PHY_06_DATA 0x00010000
+#define DDRSS_PHY_07_DATA 0x01030004
+#define DDRSS_PHY_08_DATA 0x01000000
+#define DDRSS_PHY_09_DATA 0x00000000
+#define DDRSS_PHY_10_DATA 0x00000000
+#define DDRSS_PHY_11_DATA 0x01000001
+#define DDRSS_PHY_12_DATA 0x00000100
+#define DDRSS_PHY_13_DATA 0x000800C0
+#define DDRSS_PHY_14_DATA 0x060100CC
+#define DDRSS_PHY_15_DATA 0x00030066
+#define DDRSS_PHY_16_DATA 0x00000000
+#define DDRSS_PHY_17_DATA 0x00000301
+#define DDRSS_PHY_18_DATA 0x0000AAAA
+#define DDRSS_PHY_19_DATA 0x00005555
+#define DDRSS_PHY_20_DATA 0x0000B5B5
+#define DDRSS_PHY_21_DATA 0x00004A4A
+#define DDRSS_PHY_22_DATA 0x00005656
+#define DDRSS_PHY_23_DATA 0x0000A9A9
+#define DDRSS_PHY_24_DATA 0x0000A9A9
+#define DDRSS_PHY_25_DATA 0x0000B5B5
+#define DDRSS_PHY_26_DATA 0x00000000
+#define DDRSS_PHY_27_DATA 0x00000000
+#define DDRSS_PHY_28_DATA 0x2A000000
+#define DDRSS_PHY_29_DATA 0x00000808
+#define DDRSS_PHY_30_DATA 0x0F000000
+#define DDRSS_PHY_31_DATA 0x00000F0F
+#define DDRSS_PHY_32_DATA 0x10200000
+#define DDRSS_PHY_33_DATA 0x0C002007
+#define DDRSS_PHY_34_DATA 0x00000000
+#define DDRSS_PHY_35_DATA 0x00000000
+#define DDRSS_PHY_36_DATA 0x55555555
+#define DDRSS_PHY_37_DATA 0xAAAAAAAA
+#define DDRSS_PHY_38_DATA 0x55555555
+#define DDRSS_PHY_39_DATA 0xAAAAAAAA
+#define DDRSS_PHY_40_DATA 0x00005555
+#define DDRSS_PHY_41_DATA 0x01000100
+#define DDRSS_PHY_42_DATA 0x00800180
+#define DDRSS_PHY_43_DATA 0x00000001
+#define DDRSS_PHY_44_DATA 0x00000000
+#define DDRSS_PHY_45_DATA 0x00000000
+#define DDRSS_PHY_46_DATA 0x00000000
+#define DDRSS_PHY_47_DATA 0x00000000
+#define DDRSS_PHY_48_DATA 0x00000000
+#define DDRSS_PHY_49_DATA 0x00000000
+#define DDRSS_PHY_50_DATA 0x00000000
+#define DDRSS_PHY_51_DATA 0x00000000
+#define DDRSS_PHY_52_DATA 0x00000000
+#define DDRSS_PHY_53_DATA 0x00000000
+#define DDRSS_PHY_54_DATA 0x00000000
+#define DDRSS_PHY_55_DATA 0x00000000
+#define DDRSS_PHY_56_DATA 0x00000000
+#define DDRSS_PHY_57_DATA 0x00000000
+#define DDRSS_PHY_58_DATA 0x00000000
+#define DDRSS_PHY_59_DATA 0x00000000
+#define DDRSS_PHY_60_DATA 0x00000000
+#define DDRSS_PHY_61_DATA 0x00000000
+#define DDRSS_PHY_62_DATA 0x00000000
+#define DDRSS_PHY_63_DATA 0x00000000
+#define DDRSS_PHY_64_DATA 0x00000000
+#define DDRSS_PHY_65_DATA 0x00000000
+#define DDRSS_PHY_66_DATA 0x00000104
+#define DDRSS_PHY_67_DATA 0x00000120
+#define DDRSS_PHY_68_DATA 0x00000000
+#define DDRSS_PHY_69_DATA 0x00000000
+#define DDRSS_PHY_70_DATA 0x00000000
+#define DDRSS_PHY_71_DATA 0x00000000
+#define DDRSS_PHY_72_DATA 0x00000000
+#define DDRSS_PHY_73_DATA 0x00000000
+#define DDRSS_PHY_74_DATA 0x00000000
+#define DDRSS_PHY_75_DATA 0x00000001
+#define DDRSS_PHY_76_DATA 0x07FF0000
+#define DDRSS_PHY_77_DATA 0x0080081F
+#define DDRSS_PHY_78_DATA 0x00081020
+#define DDRSS_PHY_79_DATA 0x04010000
+#define DDRSS_PHY_80_DATA 0x00000000
+#define DDRSS_PHY_81_DATA 0x00000000
+#define DDRSS_PHY_82_DATA 0x00000000
+#define DDRSS_PHY_83_DATA 0x00000100
+#define DDRSS_PHY_84_DATA 0x01CC0B01
+#define DDRSS_PHY_85_DATA 0x1003CC0B
+#define DDRSS_PHY_86_DATA 0x20000140
+#define DDRSS_PHY_87_DATA 0x07FF0200
+#define DDRSS_PHY_88_DATA 0x0000DD01
+#define DDRSS_PHY_89_DATA 0x10100303
+#define DDRSS_PHY_90_DATA 0x10101010
+#define DDRSS_PHY_91_DATA 0x10101010
+#define DDRSS_PHY_92_DATA 0x00011010
+#define DDRSS_PHY_93_DATA 0x00100010
+#define DDRSS_PHY_94_DATA 0x00100010
+#define DDRSS_PHY_95_DATA 0x00100010
+#define DDRSS_PHY_96_DATA 0x00100010
+#define DDRSS_PHY_97_DATA 0x00050010
+#define DDRSS_PHY_98_DATA 0x51517041
+#define DDRSS_PHY_99_DATA 0x31C06000
+#define DDRSS_PHY_100_DATA 0x07AB0340
+#define DDRSS_PHY_101_DATA 0x00C0C001
+#define DDRSS_PHY_102_DATA 0x05040001
+#define DDRSS_PHY_103_DATA 0x10001000
+#define DDRSS_PHY_104_DATA 0x0C053E42
+#define DDRSS_PHY_105_DATA 0x0F0C1D01
+#define DDRSS_PHY_106_DATA 0x01000140
+#define DDRSS_PHY_107_DATA 0x0C000420
+#define DDRSS_PHY_108_DATA 0x000001CC
+#define DDRSS_PHY_109_DATA 0x0A0000D0
+#define DDRSS_PHY_110_DATA 0x00030200
+#define DDRSS_PHY_111_DATA 0x02800000
+#define DDRSS_PHY_112_DATA 0x80800000
+#define DDRSS_PHY_113_DATA 0x00052010
+#define DDRSS_PHY_114_DATA 0x76543210
+#define DDRSS_PHY_115_DATA 0x00000008
+#define DDRSS_PHY_116_DATA 0x02800280
+#define DDRSS_PHY_117_DATA 0x02800280
+#define DDRSS_PHY_118_DATA 0x02800280
+#define DDRSS_PHY_119_DATA 0x02800280
+#define DDRSS_PHY_120_DATA 0x00000280
+#define DDRSS_PHY_121_DATA 0x0000A000
+#define DDRSS_PHY_122_DATA 0x00A000A0
+#define DDRSS_PHY_123_DATA 0x00A000A0
+#define DDRSS_PHY_124_DATA 0x00A000A0
+#define DDRSS_PHY_125_DATA 0x00A000A0
+#define DDRSS_PHY_126_DATA 0x00A000A0
+#define DDRSS_PHY_127_DATA 0x00A000A0
+#define DDRSS_PHY_128_DATA 0x00A000A0
+#define DDRSS_PHY_129_DATA 0x00A000A0
+#define DDRSS_PHY_130_DATA 0x011900A0
+#define DDRSS_PHY_131_DATA 0x01A00002
+#define DDRSS_PHY_132_DATA 0x00000000
+#define DDRSS_PHY_133_DATA 0x00000000
+#define DDRSS_PHY_134_DATA 0x00080200
+#define DDRSS_PHY_135_DATA 0x00000000
+#define DDRSS_PHY_136_DATA 0x20202000
+#define DDRSS_PHY_137_DATA 0x20202020
+#define DDRSS_PHY_138_DATA 0xF0F02020
+#define DDRSS_PHY_139_DATA 0x00000000
+#define DDRSS_PHY_140_DATA 0x00000000
+#define DDRSS_PHY_141_DATA 0x00000000
+#define DDRSS_PHY_142_DATA 0x00000000
+#define DDRSS_PHY_143_DATA 0x00000000
+#define DDRSS_PHY_144_DATA 0x00000000
+#define DDRSS_PHY_145_DATA 0x00000000
+#define DDRSS_PHY_146_DATA 0x00000000
+#define DDRSS_PHY_147_DATA 0x00000000
+#define DDRSS_PHY_148_DATA 0x00000000
+#define DDRSS_PHY_149_DATA 0x00000000
+#define DDRSS_PHY_150_DATA 0x00000000
+#define DDRSS_PHY_151_DATA 0x00000000
+#define DDRSS_PHY_152_DATA 0x00000000
+#define DDRSS_PHY_153_DATA 0x00000000
+#define DDRSS_PHY_154_DATA 0x00000000
+#define DDRSS_PHY_155_DATA 0x00000000
+#define DDRSS_PHY_156_DATA 0x00000000
+#define DDRSS_PHY_157_DATA 0x00000000
+#define DDRSS_PHY_158_DATA 0x00000000
+#define DDRSS_PHY_159_DATA 0x00000000
+#define DDRSS_PHY_160_DATA 0x00000000
+#define DDRSS_PHY_161_DATA 0x00000000
+#define DDRSS_PHY_162_DATA 0x00000000
+#define DDRSS_PHY_163_DATA 0x00000000
+#define DDRSS_PHY_164_DATA 0x00000000
+#define DDRSS_PHY_165_DATA 0x00000000
+#define DDRSS_PHY_166_DATA 0x00000000
+#define DDRSS_PHY_167_DATA 0x00000000
+#define DDRSS_PHY_168_DATA 0x00000000
+#define DDRSS_PHY_169_DATA 0x00000000
+#define DDRSS_PHY_170_DATA 0x00000000
+#define DDRSS_PHY_171_DATA 0x00000000
+#define DDRSS_PHY_172_DATA 0x00000000
+#define DDRSS_PHY_173_DATA 0x00000000
+#define DDRSS_PHY_174_DATA 0x00000000
+#define DDRSS_PHY_175_DATA 0x00000000
+#define DDRSS_PHY_176_DATA 0x00000000
+#define DDRSS_PHY_177_DATA 0x00000000
+#define DDRSS_PHY_178_DATA 0x00000000
+#define DDRSS_PHY_179_DATA 0x00000000
+#define DDRSS_PHY_180_DATA 0x00000000
+#define DDRSS_PHY_181_DATA 0x00000000
+#define DDRSS_PHY_182_DATA 0x00000000
+#define DDRSS_PHY_183_DATA 0x00000000
+#define DDRSS_PHY_184_DATA 0x00000000
+#define DDRSS_PHY_185_DATA 0x00000000
+#define DDRSS_PHY_186_DATA 0x00000000
+#define DDRSS_PHY_187_DATA 0x00000000
+#define DDRSS_PHY_188_DATA 0x00000000
+#define DDRSS_PHY_189_DATA 0x00000000
+#define DDRSS_PHY_190_DATA 0x00000000
+#define DDRSS_PHY_191_DATA 0x00000000
+#define DDRSS_PHY_192_DATA 0x00000000
+#define DDRSS_PHY_193_DATA 0x00000000
+#define DDRSS_PHY_194_DATA 0x00000000
+#define DDRSS_PHY_195_DATA 0x00000000
+#define DDRSS_PHY_196_DATA 0x00000000
+#define DDRSS_PHY_197_DATA 0x00000000
+#define DDRSS_PHY_198_DATA 0x00000000
+#define DDRSS_PHY_199_DATA 0x00000000
+#define DDRSS_PHY_200_DATA 0x00000000
+#define DDRSS_PHY_201_DATA 0x00000000
+#define DDRSS_PHY_202_DATA 0x00000000
+#define DDRSS_PHY_203_DATA 0x00000000
+#define DDRSS_PHY_204_DATA 0x00000000
+#define DDRSS_PHY_205_DATA 0x00000000
+#define DDRSS_PHY_206_DATA 0x00000000
+#define DDRSS_PHY_207_DATA 0x00000000
+#define DDRSS_PHY_208_DATA 0x00000000
+#define DDRSS_PHY_209_DATA 0x00000000
+#define DDRSS_PHY_210_DATA 0x00000000
+#define DDRSS_PHY_211_DATA 0x00000000
+#define DDRSS_PHY_212_DATA 0x00000000
+#define DDRSS_PHY_213_DATA 0x00000000
+#define DDRSS_PHY_214_DATA 0x00000000
+#define DDRSS_PHY_215_DATA 0x00000000
+#define DDRSS_PHY_216_DATA 0x00000000
+#define DDRSS_PHY_217_DATA 0x00000000
+#define DDRSS_PHY_218_DATA 0x00000000
+#define DDRSS_PHY_219_DATA 0x00000000
+#define DDRSS_PHY_220_DATA 0x00000000
+#define DDRSS_PHY_221_DATA 0x00000000
+#define DDRSS_PHY_222_DATA 0x00000000
+#define DDRSS_PHY_223_DATA 0x00000000
+#define DDRSS_PHY_224_DATA 0x00000000
+#define DDRSS_PHY_225_DATA 0x00000000
+#define DDRSS_PHY_226_DATA 0x00000000
+#define DDRSS_PHY_227_DATA 0x00000000
+#define DDRSS_PHY_228_DATA 0x00000000
+#define DDRSS_PHY_229_DATA 0x00000000
+#define DDRSS_PHY_230_DATA 0x00000000
+#define DDRSS_PHY_231_DATA 0x00000000
+#define DDRSS_PHY_232_DATA 0x00000000
+#define DDRSS_PHY_233_DATA 0x00000000
+#define DDRSS_PHY_234_DATA 0x00000000
+#define DDRSS_PHY_235_DATA 0x00000000
+#define DDRSS_PHY_236_DATA 0x00000000
+#define DDRSS_PHY_237_DATA 0x00000000
+#define DDRSS_PHY_238_DATA 0x00000000
+#define DDRSS_PHY_239_DATA 0x00000000
+#define DDRSS_PHY_240_DATA 0x00000000
+#define DDRSS_PHY_241_DATA 0x00000000
+#define DDRSS_PHY_242_DATA 0x00000000
+#define DDRSS_PHY_243_DATA 0x00000000
+#define DDRSS_PHY_244_DATA 0x00000000
+#define DDRSS_PHY_245_DATA 0x00000000
+#define DDRSS_PHY_246_DATA 0x00000000
+#define DDRSS_PHY_247_DATA 0x00000000
+#define DDRSS_PHY_248_DATA 0x00000000
+#define DDRSS_PHY_249_DATA 0x00000000
+#define DDRSS_PHY_250_DATA 0x00000000
+#define DDRSS_PHY_251_DATA 0x00000000
+#define DDRSS_PHY_252_DATA 0x00000000
+#define DDRSS_PHY_253_DATA 0x00000000
+#define DDRSS_PHY_254_DATA 0x00000000
+#define DDRSS_PHY_255_DATA 0x00000000
+#define DDRSS_PHY_256_DATA 0x000004F0
+#define DDRSS_PHY_257_DATA 0x00000000
+#define DDRSS_PHY_258_DATA 0x00030200
+#define DDRSS_PHY_259_DATA 0x00000000
+#define DDRSS_PHY_260_DATA 0x00000000
+#define DDRSS_PHY_261_DATA 0x01030000
+#define DDRSS_PHY_262_DATA 0x00010000
+#define DDRSS_PHY_263_DATA 0x01030004
+#define DDRSS_PHY_264_DATA 0x01000000
+#define DDRSS_PHY_265_DATA 0x00000000
+#define DDRSS_PHY_266_DATA 0x00000000
+#define DDRSS_PHY_267_DATA 0x01000001
+#define DDRSS_PHY_268_DATA 0x00000100
+#define DDRSS_PHY_269_DATA 0x000800C0
+#define DDRSS_PHY_270_DATA 0x060100CC
+#define DDRSS_PHY_271_DATA 0x00030066
+#define DDRSS_PHY_272_DATA 0x00000000
+#define DDRSS_PHY_273_DATA 0x00000301
+#define DDRSS_PHY_274_DATA 0x0000AAAA
+#define DDRSS_PHY_275_DATA 0x00005555
+#define DDRSS_PHY_276_DATA 0x0000B5B5
+#define DDRSS_PHY_277_DATA 0x00004A4A
+#define DDRSS_PHY_278_DATA 0x00005656
+#define DDRSS_PHY_279_DATA 0x0000A9A9
+#define DDRSS_PHY_280_DATA 0x0000A9A9
+#define DDRSS_PHY_281_DATA 0x0000B5B5
+#define DDRSS_PHY_282_DATA 0x00000000
+#define DDRSS_PHY_283_DATA 0x00000000
+#define DDRSS_PHY_284_DATA 0x2A000000
+#define DDRSS_PHY_285_DATA 0x00000808
+#define DDRSS_PHY_286_DATA 0x0F000000
+#define DDRSS_PHY_287_DATA 0x00000F0F
+#define DDRSS_PHY_288_DATA 0x10200000
+#define DDRSS_PHY_289_DATA 0x0C002007
+#define DDRSS_PHY_290_DATA 0x00000000
+#define DDRSS_PHY_291_DATA 0x00000000
+#define DDRSS_PHY_292_DATA 0x55555555
+#define DDRSS_PHY_293_DATA 0xAAAAAAAA
+#define DDRSS_PHY_294_DATA 0x55555555
+#define DDRSS_PHY_295_DATA 0xAAAAAAAA
+#define DDRSS_PHY_296_DATA 0x00005555
+#define DDRSS_PHY_297_DATA 0x01000100
+#define DDRSS_PHY_298_DATA 0x00800180
+#define DDRSS_PHY_299_DATA 0x00000000
+#define DDRSS_PHY_300_DATA 0x00000000
+#define DDRSS_PHY_301_DATA 0x00000000
+#define DDRSS_PHY_302_DATA 0x00000000
+#define DDRSS_PHY_303_DATA 0x00000000
+#define DDRSS_PHY_304_DATA 0x00000000
+#define DDRSS_PHY_305_DATA 0x00000000
+#define DDRSS_PHY_306_DATA 0x00000000
+#define DDRSS_PHY_307_DATA 0x00000000
+#define DDRSS_PHY_308_DATA 0x00000000
+#define DDRSS_PHY_309_DATA 0x00000000
+#define DDRSS_PHY_310_DATA 0x00000000
+#define DDRSS_PHY_311_DATA 0x00000000
+#define DDRSS_PHY_312_DATA 0x00000000
+#define DDRSS_PHY_313_DATA 0x00000000
+#define DDRSS_PHY_314_DATA 0x00000000
+#define DDRSS_PHY_315_DATA 0x00000000
+#define DDRSS_PHY_316_DATA 0x00000000
+#define DDRSS_PHY_317_DATA 0x00000000
+#define DDRSS_PHY_318_DATA 0x00000000
+#define DDRSS_PHY_319_DATA 0x00000000
+#define DDRSS_PHY_320_DATA 0x00000000
+#define DDRSS_PHY_321_DATA 0x00000000
+#define DDRSS_PHY_322_DATA 0x00000104
+#define DDRSS_PHY_323_DATA 0x00000120
+#define DDRSS_PHY_324_DATA 0x00000000
+#define DDRSS_PHY_325_DATA 0x00000000
+#define DDRSS_PHY_326_DATA 0x00000000
+#define DDRSS_PHY_327_DATA 0x00000000
+#define DDRSS_PHY_328_DATA 0x00000000
+#define DDRSS_PHY_329_DATA 0x00000000
+#define DDRSS_PHY_330_DATA 0x00000000
+#define DDRSS_PHY_331_DATA 0x00000001
+#define DDRSS_PHY_332_DATA 0x07FF0000
+#define DDRSS_PHY_333_DATA 0x0080081F
+#define DDRSS_PHY_334_DATA 0x00081020
+#define DDRSS_PHY_335_DATA 0x04010000
+#define DDRSS_PHY_336_DATA 0x00000000
+#define DDRSS_PHY_337_DATA 0x00000000
+#define DDRSS_PHY_338_DATA 0x00000000
+#define DDRSS_PHY_339_DATA 0x00000100
+#define DDRSS_PHY_340_DATA 0x01CC0B01
+#define DDRSS_PHY_341_DATA 0x1003CC0B
+#define DDRSS_PHY_342_DATA 0x20000140
+#define DDRSS_PHY_343_DATA 0x07FF0200
+#define DDRSS_PHY_344_DATA 0x0000DD01
+#define DDRSS_PHY_345_DATA 0x10100303
+#define DDRSS_PHY_346_DATA 0x10101010
+#define DDRSS_PHY_347_DATA 0x10101010
+#define DDRSS_PHY_348_DATA 0x00011010
+#define DDRSS_PHY_349_DATA 0x00100010
+#define DDRSS_PHY_350_DATA 0x00100010
+#define DDRSS_PHY_351_DATA 0x00100010
+#define DDRSS_PHY_352_DATA 0x00100010
+#define DDRSS_PHY_353_DATA 0x00050010
+#define DDRSS_PHY_354_DATA 0x51517041
+#define DDRSS_PHY_355_DATA 0x31C06000
+#define DDRSS_PHY_356_DATA 0x07AB0340
+#define DDRSS_PHY_357_DATA 0x00C0C001
+#define DDRSS_PHY_358_DATA 0x05040001
+#define DDRSS_PHY_359_DATA 0x10001000
+#define DDRSS_PHY_360_DATA 0x0C053E42
+#define DDRSS_PHY_361_DATA 0x0F0C1D01
+#define DDRSS_PHY_362_DATA 0x01000140
+#define DDRSS_PHY_363_DATA 0x0C000420
+#define DDRSS_PHY_364_DATA 0x000001CC
+#define DDRSS_PHY_365_DATA 0x0A0000D0
+#define DDRSS_PHY_366_DATA 0x00030200
+#define DDRSS_PHY_367_DATA 0x02800000
+#define DDRSS_PHY_368_DATA 0x80800000
+#define DDRSS_PHY_369_DATA 0x00052010
+#define DDRSS_PHY_370_DATA 0x76543210
+#define DDRSS_PHY_371_DATA 0x00000008
+#define DDRSS_PHY_372_DATA 0x02800280
+#define DDRSS_PHY_373_DATA 0x02800280
+#define DDRSS_PHY_374_DATA 0x02800280
+#define DDRSS_PHY_375_DATA 0x02800280
+#define DDRSS_PHY_376_DATA 0x00000280
+#define DDRSS_PHY_377_DATA 0x0000A000
+#define DDRSS_PHY_378_DATA 0x00A000A0
+#define DDRSS_PHY_379_DATA 0x00A000A0
+#define DDRSS_PHY_380_DATA 0x00A000A0
+#define DDRSS_PHY_381_DATA 0x00A000A0
+#define DDRSS_PHY_382_DATA 0x00A000A0
+#define DDRSS_PHY_383_DATA 0x00A000A0
+#define DDRSS_PHY_384_DATA 0x00A000A0
+#define DDRSS_PHY_385_DATA 0x00A000A0
+#define DDRSS_PHY_386_DATA 0x011900A0
+#define DDRSS_PHY_387_DATA 0x01A00002
+#define DDRSS_PHY_388_DATA 0x00000000
+#define DDRSS_PHY_389_DATA 0x00000000
+#define DDRSS_PHY_390_DATA 0x00080200
+#define DDRSS_PHY_391_DATA 0x00000000
+#define DDRSS_PHY_392_DATA 0x20202000
+#define DDRSS_PHY_393_DATA 0x20202020
+#define DDRSS_PHY_394_DATA 0xF0F02020
+#define DDRSS_PHY_395_DATA 0x00000000
+#define DDRSS_PHY_396_DATA 0x00000000
+#define DDRSS_PHY_397_DATA 0x00000000
+#define DDRSS_PHY_398_DATA 0x00000000
+#define DDRSS_PHY_399_DATA 0x00000000
+#define DDRSS_PHY_400_DATA 0x00000000
+#define DDRSS_PHY_401_DATA 0x00000000
+#define DDRSS_PHY_402_DATA 0x00000000
+#define DDRSS_PHY_403_DATA 0x00000000
+#define DDRSS_PHY_404_DATA 0x00000000
+#define DDRSS_PHY_405_DATA 0x00000000
+#define DDRSS_PHY_406_DATA 0x00000000
+#define DDRSS_PHY_407_DATA 0x00000000
+#define DDRSS_PHY_408_DATA 0x00000000
+#define DDRSS_PHY_409_DATA 0x00000000
+#define DDRSS_PHY_410_DATA 0x00000000
+#define DDRSS_PHY_411_DATA 0x00000000
+#define DDRSS_PHY_412_DATA 0x00000000
+#define DDRSS_PHY_413_DATA 0x00000000
+#define DDRSS_PHY_414_DATA 0x00000000
+#define DDRSS_PHY_415_DATA 0x00000000
+#define DDRSS_PHY_416_DATA 0x00000000
+#define DDRSS_PHY_417_DATA 0x00000000
+#define DDRSS_PHY_418_DATA 0x00000000
+#define DDRSS_PHY_419_DATA 0x00000000
+#define DDRSS_PHY_420_DATA 0x00000000
+#define DDRSS_PHY_421_DATA 0x00000000
+#define DDRSS_PHY_422_DATA 0x00000000
+#define DDRSS_PHY_423_DATA 0x00000000
+#define DDRSS_PHY_424_DATA 0x00000000
+#define DDRSS_PHY_425_DATA 0x00000000
+#define DDRSS_PHY_426_DATA 0x00000000
+#define DDRSS_PHY_427_DATA 0x00000000
+#define DDRSS_PHY_428_DATA 0x00000000
+#define DDRSS_PHY_429_DATA 0x00000000
+#define DDRSS_PHY_430_DATA 0x00000000
+#define DDRSS_PHY_431_DATA 0x00000000
+#define DDRSS_PHY_432_DATA 0x00000000
+#define DDRSS_PHY_433_DATA 0x00000000
+#define DDRSS_PHY_434_DATA 0x00000000
+#define DDRSS_PHY_435_DATA 0x00000000
+#define DDRSS_PHY_436_DATA 0x00000000
+#define DDRSS_PHY_437_DATA 0x00000000
+#define DDRSS_PHY_438_DATA 0x00000000
+#define DDRSS_PHY_439_DATA 0x00000000
+#define DDRSS_PHY_440_DATA 0x00000000
+#define DDRSS_PHY_441_DATA 0x00000000
+#define DDRSS_PHY_442_DATA 0x00000000
+#define DDRSS_PHY_443_DATA 0x00000000
+#define DDRSS_PHY_444_DATA 0x00000000
+#define DDRSS_PHY_445_DATA 0x00000000
+#define DDRSS_PHY_446_DATA 0x00000000
+#define DDRSS_PHY_447_DATA 0x00000000
+#define DDRSS_PHY_448_DATA 0x00000000
+#define DDRSS_PHY_449_DATA 0x00000000
+#define DDRSS_PHY_450_DATA 0x00000000
+#define DDRSS_PHY_451_DATA 0x00000000
+#define DDRSS_PHY_452_DATA 0x00000000
+#define DDRSS_PHY_453_DATA 0x00000000
+#define DDRSS_PHY_454_DATA 0x00000000
+#define DDRSS_PHY_455_DATA 0x00000000
+#define DDRSS_PHY_456_DATA 0x00000000
+#define DDRSS_PHY_457_DATA 0x00000000
+#define DDRSS_PHY_458_DATA 0x00000000
+#define DDRSS_PHY_459_DATA 0x00000000
+#define DDRSS_PHY_460_DATA 0x00000000
+#define DDRSS_PHY_461_DATA 0x00000000
+#define DDRSS_PHY_462_DATA 0x00000000
+#define DDRSS_PHY_463_DATA 0x00000000
+#define DDRSS_PHY_464_DATA 0x00000000
+#define DDRSS_PHY_465_DATA 0x00000000
+#define DDRSS_PHY_466_DATA 0x00000000
+#define DDRSS_PHY_467_DATA 0x00000000
+#define DDRSS_PHY_468_DATA 0x00000000
+#define DDRSS_PHY_469_DATA 0x00000000
+#define DDRSS_PHY_470_DATA 0x00000000
+#define DDRSS_PHY_471_DATA 0x00000000
+#define DDRSS_PHY_472_DATA 0x00000000
+#define DDRSS_PHY_473_DATA 0x00000000
+#define DDRSS_PHY_474_DATA 0x00000000
+#define DDRSS_PHY_475_DATA 0x00000000
+#define DDRSS_PHY_476_DATA 0x00000000
+#define DDRSS_PHY_477_DATA 0x00000000
+#define DDRSS_PHY_478_DATA 0x00000000
+#define DDRSS_PHY_479_DATA 0x00000000
+#define DDRSS_PHY_480_DATA 0x00000000
+#define DDRSS_PHY_481_DATA 0x00000000
+#define DDRSS_PHY_482_DATA 0x00000000
+#define DDRSS_PHY_483_DATA 0x00000000
+#define DDRSS_PHY_484_DATA 0x00000000
+#define DDRSS_PHY_485_DATA 0x00000000
+#define DDRSS_PHY_486_DATA 0x00000000
+#define DDRSS_PHY_487_DATA 0x00000000
+#define DDRSS_PHY_488_DATA 0x00000000
+#define DDRSS_PHY_489_DATA 0x00000000
+#define DDRSS_PHY_490_DATA 0x00000000
+#define DDRSS_PHY_491_DATA 0x00000000
+#define DDRSS_PHY_492_DATA 0x00000000
+#define DDRSS_PHY_493_DATA 0x00000000
+#define DDRSS_PHY_494_DATA 0x00000000
+#define DDRSS_PHY_495_DATA 0x00000000
+#define DDRSS_PHY_496_DATA 0x00000000
+#define DDRSS_PHY_497_DATA 0x00000000
+#define DDRSS_PHY_498_DATA 0x00000000
+#define DDRSS_PHY_499_DATA 0x00000000
+#define DDRSS_PHY_500_DATA 0x00000000
+#define DDRSS_PHY_501_DATA 0x00000000
+#define DDRSS_PHY_502_DATA 0x00000000
+#define DDRSS_PHY_503_DATA 0x00000000
+#define DDRSS_PHY_504_DATA 0x00000000
+#define DDRSS_PHY_505_DATA 0x00000000
+#define DDRSS_PHY_506_DATA 0x00000000
+#define DDRSS_PHY_507_DATA 0x00000000
+#define DDRSS_PHY_508_DATA 0x00000000
+#define DDRSS_PHY_509_DATA 0x00000000
+#define DDRSS_PHY_510_DATA 0x00000000
+#define DDRSS_PHY_511_DATA 0x00000000
+#define DDRSS_PHY_512_DATA 0x000004F0
+#define DDRSS_PHY_513_DATA 0x00000000
+#define DDRSS_PHY_514_DATA 0x00030200
+#define DDRSS_PHY_515_DATA 0x00000000
+#define DDRSS_PHY_516_DATA 0x00000000
+#define DDRSS_PHY_517_DATA 0x01030000
+#define DDRSS_PHY_518_DATA 0x00010000
+#define DDRSS_PHY_519_DATA 0x01030004
+#define DDRSS_PHY_520_DATA 0x01000000
+#define DDRSS_PHY_521_DATA 0x00000000
+#define DDRSS_PHY_522_DATA 0x00000000
+#define DDRSS_PHY_523_DATA 0x01000001
+#define DDRSS_PHY_524_DATA 0x00000100
+#define DDRSS_PHY_525_DATA 0x000800C0
+#define DDRSS_PHY_526_DATA 0x060100CC
+#define DDRSS_PHY_527_DATA 0x00030066
+#define DDRSS_PHY_528_DATA 0x00000000
+#define DDRSS_PHY_529_DATA 0x00000301
+#define DDRSS_PHY_530_DATA 0x0000AAAA
+#define DDRSS_PHY_531_DATA 0x00005555
+#define DDRSS_PHY_532_DATA 0x0000B5B5
+#define DDRSS_PHY_533_DATA 0x00004A4A
+#define DDRSS_PHY_534_DATA 0x00005656
+#define DDRSS_PHY_535_DATA 0x0000A9A9
+#define DDRSS_PHY_536_DATA 0x0000A9A9
+#define DDRSS_PHY_537_DATA 0x0000B5B5
+#define DDRSS_PHY_538_DATA 0x00000000
+#define DDRSS_PHY_539_DATA 0x00000000
+#define DDRSS_PHY_540_DATA 0x2A000000
+#define DDRSS_PHY_541_DATA 0x00000808
+#define DDRSS_PHY_542_DATA 0x0F000000
+#define DDRSS_PHY_543_DATA 0x00000F0F
+#define DDRSS_PHY_544_DATA 0x10200000
+#define DDRSS_PHY_545_DATA 0x0C002007
+#define DDRSS_PHY_546_DATA 0x00000000
+#define DDRSS_PHY_547_DATA 0x00000000
+#define DDRSS_PHY_548_DATA 0x55555555
+#define DDRSS_PHY_549_DATA 0xAAAAAAAA
+#define DDRSS_PHY_550_DATA 0x55555555
+#define DDRSS_PHY_551_DATA 0xAAAAAAAA
+#define DDRSS_PHY_552_DATA 0x00005555
+#define DDRSS_PHY_553_DATA 0x01000100
+#define DDRSS_PHY_554_DATA 0x00800180
+#define DDRSS_PHY_555_DATA 0x00000001
+#define DDRSS_PHY_556_DATA 0x00000000
+#define DDRSS_PHY_557_DATA 0x00000000
+#define DDRSS_PHY_558_DATA 0x00000000
+#define DDRSS_PHY_559_DATA 0x00000000
+#define DDRSS_PHY_560_DATA 0x00000000
+#define DDRSS_PHY_561_DATA 0x00000000
+#define DDRSS_PHY_562_DATA 0x00000000
+#define DDRSS_PHY_563_DATA 0x00000000
+#define DDRSS_PHY_564_DATA 0x00000000
+#define DDRSS_PHY_565_DATA 0x00000000
+#define DDRSS_PHY_566_DATA 0x00000000
+#define DDRSS_PHY_567_DATA 0x00000000
+#define DDRSS_PHY_568_DATA 0x00000000
+#define DDRSS_PHY_569_DATA 0x00000000
+#define DDRSS_PHY_570_DATA 0x00000000
+#define DDRSS_PHY_571_DATA 0x00000000
+#define DDRSS_PHY_572_DATA 0x00000000
+#define DDRSS_PHY_573_DATA 0x00000000
+#define DDRSS_PHY_574_DATA 0x00000000
+#define DDRSS_PHY_575_DATA 0x00000000
+#define DDRSS_PHY_576_DATA 0x00000000
+#define DDRSS_PHY_577_DATA 0x00000000
+#define DDRSS_PHY_578_DATA 0x00000104
+#define DDRSS_PHY_579_DATA 0x00000120
+#define DDRSS_PHY_580_DATA 0x00000000
+#define DDRSS_PHY_581_DATA 0x00000000
+#define DDRSS_PHY_582_DATA 0x00000000
+#define DDRSS_PHY_583_DATA 0x00000000
+#define DDRSS_PHY_584_DATA 0x00000000
+#define DDRSS_PHY_585_DATA 0x00000000
+#define DDRSS_PHY_586_DATA 0x00000000
+#define DDRSS_PHY_587_DATA 0x00000001
+#define DDRSS_PHY_588_DATA 0x07FF0000
+#define DDRSS_PHY_589_DATA 0x0080081F
+#define DDRSS_PHY_590_DATA 0x00081020
+#define DDRSS_PHY_591_DATA 0x04010000
+#define DDRSS_PHY_592_DATA 0x00000000
+#define DDRSS_PHY_593_DATA 0x00000000
+#define DDRSS_PHY_594_DATA 0x00000000
+#define DDRSS_PHY_595_DATA 0x00000100
+#define DDRSS_PHY_596_DATA 0x01CC0B01
+#define DDRSS_PHY_597_DATA 0x1003CC0B
+#define DDRSS_PHY_598_DATA 0x20000140
+#define DDRSS_PHY_599_DATA 0x07FF0200
+#define DDRSS_PHY_600_DATA 0x0000DD01
+#define DDRSS_PHY_601_DATA 0x10100303
+#define DDRSS_PHY_602_DATA 0x10101010
+#define DDRSS_PHY_603_DATA 0x10101010
+#define DDRSS_PHY_604_DATA 0x00011010
+#define DDRSS_PHY_605_DATA 0x00100010
+#define DDRSS_PHY_606_DATA 0x00100010
+#define DDRSS_PHY_607_DATA 0x00100010
+#define DDRSS_PHY_608_DATA 0x00100010
+#define DDRSS_PHY_609_DATA 0x00050010
+#define DDRSS_PHY_610_DATA 0x51517041
+#define DDRSS_PHY_611_DATA 0x31C06000
+#define DDRSS_PHY_612_DATA 0x07AB0340
+#define DDRSS_PHY_613_DATA 0x00C0C001
+#define DDRSS_PHY_614_DATA 0x05040001
+#define DDRSS_PHY_615_DATA 0x10001000
+#define DDRSS_PHY_616_DATA 0x0C053E42
+#define DDRSS_PHY_617_DATA 0x0F0C1D01
+#define DDRSS_PHY_618_DATA 0x01000140
+#define DDRSS_PHY_619_DATA 0x0C000420
+#define DDRSS_PHY_620_DATA 0x000001CC
+#define DDRSS_PHY_621_DATA 0x0A0000D0
+#define DDRSS_PHY_622_DATA 0x00030200
+#define DDRSS_PHY_623_DATA 0x02800000
+#define DDRSS_PHY_624_DATA 0x80800000
+#define DDRSS_PHY_625_DATA 0x00052010
+#define DDRSS_PHY_626_DATA 0x76543210
+#define DDRSS_PHY_627_DATA 0x00000008
+#define DDRSS_PHY_628_DATA 0x02800280
+#define DDRSS_PHY_629_DATA 0x02800280
+#define DDRSS_PHY_630_DATA 0x02800280
+#define DDRSS_PHY_631_DATA 0x02800280
+#define DDRSS_PHY_632_DATA 0x00000280
+#define DDRSS_PHY_633_DATA 0x0000A000
+#define DDRSS_PHY_634_DATA 0x00A000A0
+#define DDRSS_PHY_635_DATA 0x00A000A0
+#define DDRSS_PHY_636_DATA 0x00A000A0
+#define DDRSS_PHY_637_DATA 0x00A000A0
+#define DDRSS_PHY_638_DATA 0x00A000A0
+#define DDRSS_PHY_639_DATA 0x00A000A0
+#define DDRSS_PHY_640_DATA 0x00A000A0
+#define DDRSS_PHY_641_DATA 0x00A000A0
+#define DDRSS_PHY_642_DATA 0x011900A0
+#define DDRSS_PHY_643_DATA 0x01A00002
+#define DDRSS_PHY_644_DATA 0x00000000
+#define DDRSS_PHY_645_DATA 0x00000000
+#define DDRSS_PHY_646_DATA 0x00080200
+#define DDRSS_PHY_647_DATA 0x00000000
+#define DDRSS_PHY_648_DATA 0x20202000
+#define DDRSS_PHY_649_DATA 0x20202020
+#define DDRSS_PHY_650_DATA 0xF0F02020
+#define DDRSS_PHY_651_DATA 0x00000000
+#define DDRSS_PHY_652_DATA 0x00000000
+#define DDRSS_PHY_653_DATA 0x00000000
+#define DDRSS_PHY_654_DATA 0x00000000
+#define DDRSS_PHY_655_DATA 0x00000000
+#define DDRSS_PHY_656_DATA 0x00000000
+#define DDRSS_PHY_657_DATA 0x00000000
+#define DDRSS_PHY_658_DATA 0x00000000
+#define DDRSS_PHY_659_DATA 0x00000000
+#define DDRSS_PHY_660_DATA 0x00000000
+#define DDRSS_PHY_661_DATA 0x00000000
+#define DDRSS_PHY_662_DATA 0x00000000
+#define DDRSS_PHY_663_DATA 0x00000000
+#define DDRSS_PHY_664_DATA 0x00000000
+#define DDRSS_PHY_665_DATA 0x00000000
+#define DDRSS_PHY_666_DATA 0x00000000
+#define DDRSS_PHY_667_DATA 0x00000000
+#define DDRSS_PHY_668_DATA 0x00000000
+#define DDRSS_PHY_669_DATA 0x00000000
+#define DDRSS_PHY_670_DATA 0x00000000
+#define DDRSS_PHY_671_DATA 0x00000000
+#define DDRSS_PHY_672_DATA 0x00000000
+#define DDRSS_PHY_673_DATA 0x00000000
+#define DDRSS_PHY_674_DATA 0x00000000
+#define DDRSS_PHY_675_DATA 0x00000000
+#define DDRSS_PHY_676_DATA 0x00000000
+#define DDRSS_PHY_677_DATA 0x00000000
+#define DDRSS_PHY_678_DATA 0x00000000
+#define DDRSS_PHY_679_DATA 0x00000000
+#define DDRSS_PHY_680_DATA 0x00000000
+#define DDRSS_PHY_681_DATA 0x00000000
+#define DDRSS_PHY_682_DATA 0x00000000
+#define DDRSS_PHY_683_DATA 0x00000000
+#define DDRSS_PHY_684_DATA 0x00000000
+#define DDRSS_PHY_685_DATA 0x00000000
+#define DDRSS_PHY_686_DATA 0x00000000
+#define DDRSS_PHY_687_DATA 0x00000000
+#define DDRSS_PHY_688_DATA 0x00000000
+#define DDRSS_PHY_689_DATA 0x00000000
+#define DDRSS_PHY_690_DATA 0x00000000
+#define DDRSS_PHY_691_DATA 0x00000000
+#define DDRSS_PHY_692_DATA 0x00000000
+#define DDRSS_PHY_693_DATA 0x00000000
+#define DDRSS_PHY_694_DATA 0x00000000
+#define DDRSS_PHY_695_DATA 0x00000000
+#define DDRSS_PHY_696_DATA 0x00000000
+#define DDRSS_PHY_697_DATA 0x00000000
+#define DDRSS_PHY_698_DATA 0x00000000
+#define DDRSS_PHY_699_DATA 0x00000000
+#define DDRSS_PHY_700_DATA 0x00000000
+#define DDRSS_PHY_701_DATA 0x00000000
+#define DDRSS_PHY_702_DATA 0x00000000
+#define DDRSS_PHY_703_DATA 0x00000000
+#define DDRSS_PHY_704_DATA 0x00000000
+#define DDRSS_PHY_705_DATA 0x00000000
+#define DDRSS_PHY_706_DATA 0x00000000
+#define DDRSS_PHY_707_DATA 0x00000000
+#define DDRSS_PHY_708_DATA 0x00000000
+#define DDRSS_PHY_709_DATA 0x00000000
+#define DDRSS_PHY_710_DATA 0x00000000
+#define DDRSS_PHY_711_DATA 0x00000000
+#define DDRSS_PHY_712_DATA 0x00000000
+#define DDRSS_PHY_713_DATA 0x00000000
+#define DDRSS_PHY_714_DATA 0x00000000
+#define DDRSS_PHY_715_DATA 0x00000000
+#define DDRSS_PHY_716_DATA 0x00000000
+#define DDRSS_PHY_717_DATA 0x00000000
+#define DDRSS_PHY_718_DATA 0x00000000
+#define DDRSS_PHY_719_DATA 0x00000000
+#define DDRSS_PHY_720_DATA 0x00000000
+#define DDRSS_PHY_721_DATA 0x00000000
+#define DDRSS_PHY_722_DATA 0x00000000
+#define DDRSS_PHY_723_DATA 0x00000000
+#define DDRSS_PHY_724_DATA 0x00000000
+#define DDRSS_PHY_725_DATA 0x00000000
+#define DDRSS_PHY_726_DATA 0x00000000
+#define DDRSS_PHY_727_DATA 0x00000000
+#define DDRSS_PHY_728_DATA 0x00000000
+#define DDRSS_PHY_729_DATA 0x00000000
+#define DDRSS_PHY_730_DATA 0x00000000
+#define DDRSS_PHY_731_DATA 0x00000000
+#define DDRSS_PHY_732_DATA 0x00000000
+#define DDRSS_PHY_733_DATA 0x00000000
+#define DDRSS_PHY_734_DATA 0x00000000
+#define DDRSS_PHY_735_DATA 0x00000000
+#define DDRSS_PHY_736_DATA 0x00000000
+#define DDRSS_PHY_737_DATA 0x00000000
+#define DDRSS_PHY_738_DATA 0x00000000
+#define DDRSS_PHY_739_DATA 0x00000000
+#define DDRSS_PHY_740_DATA 0x00000000
+#define DDRSS_PHY_741_DATA 0x00000000
+#define DDRSS_PHY_742_DATA 0x00000000
+#define DDRSS_PHY_743_DATA 0x00000000
+#define DDRSS_PHY_744_DATA 0x00000000
+#define DDRSS_PHY_745_DATA 0x00000000
+#define DDRSS_PHY_746_DATA 0x00000000
+#define DDRSS_PHY_747_DATA 0x00000000
+#define DDRSS_PHY_748_DATA 0x00000000
+#define DDRSS_PHY_749_DATA 0x00000000
+#define DDRSS_PHY_750_DATA 0x00000000
+#define DDRSS_PHY_751_DATA 0x00000000
+#define DDRSS_PHY_752_DATA 0x00000000
+#define DDRSS_PHY_753_DATA 0x00000000
+#define DDRSS_PHY_754_DATA 0x00000000
+#define DDRSS_PHY_755_DATA 0x00000000
+#define DDRSS_PHY_756_DATA 0x00000000
+#define DDRSS_PHY_757_DATA 0x00000000
+#define DDRSS_PHY_758_DATA 0x00000000
+#define DDRSS_PHY_759_DATA 0x00000000
+#define DDRSS_PHY_760_DATA 0x00000000
+#define DDRSS_PHY_761_DATA 0x00000000
+#define DDRSS_PHY_762_DATA 0x00000000
+#define DDRSS_PHY_763_DATA 0x00000000
+#define DDRSS_PHY_764_DATA 0x00000000
+#define DDRSS_PHY_765_DATA 0x00000000
+#define DDRSS_PHY_766_DATA 0x00000000
+#define DDRSS_PHY_767_DATA 0x00000000
+#define DDRSS_PHY_768_DATA 0x000004F0
+#define DDRSS_PHY_769_DATA 0x00000000
+#define DDRSS_PHY_770_DATA 0x00030200
+#define DDRSS_PHY_771_DATA 0x00000000
+#define DDRSS_PHY_772_DATA 0x00000000
+#define DDRSS_PHY_773_DATA 0x01030000
+#define DDRSS_PHY_774_DATA 0x00010000
+#define DDRSS_PHY_775_DATA 0x01030004
+#define DDRSS_PHY_776_DATA 0x01000000
+#define DDRSS_PHY_777_DATA 0x00000000
+#define DDRSS_PHY_778_DATA 0x00000000
+#define DDRSS_PHY_779_DATA 0x01000001
+#define DDRSS_PHY_780_DATA 0x00000100
+#define DDRSS_PHY_781_DATA 0x000800C0
+#define DDRSS_PHY_782_DATA 0x060100CC
+#define DDRSS_PHY_783_DATA 0x00030066
+#define DDRSS_PHY_784_DATA 0x00000000
+#define DDRSS_PHY_785_DATA 0x00000301
+#define DDRSS_PHY_786_DATA 0x0000AAAA
+#define DDRSS_PHY_787_DATA 0x00005555
+#define DDRSS_PHY_788_DATA 0x0000B5B5
+#define DDRSS_PHY_789_DATA 0x00004A4A
+#define DDRSS_PHY_790_DATA 0x00005656
+#define DDRSS_PHY_791_DATA 0x0000A9A9
+#define DDRSS_PHY_792_DATA 0x0000A9A9
+#define DDRSS_PHY_793_DATA 0x0000B5B5
+#define DDRSS_PHY_794_DATA 0x00000000
+#define DDRSS_PHY_795_DATA 0x00000000
+#define DDRSS_PHY_796_DATA 0x2A000000
+#define DDRSS_PHY_797_DATA 0x00000808
+#define DDRSS_PHY_798_DATA 0x0F000000
+#define DDRSS_PHY_799_DATA 0x00000F0F
+#define DDRSS_PHY_800_DATA 0x10200000
+#define DDRSS_PHY_801_DATA 0x0C002007
+#define DDRSS_PHY_802_DATA 0x00000000
+#define DDRSS_PHY_803_DATA 0x00000000
+#define DDRSS_PHY_804_DATA 0x55555555
+#define DDRSS_PHY_805_DATA 0xAAAAAAAA
+#define DDRSS_PHY_806_DATA 0x55555555
+#define DDRSS_PHY_807_DATA 0xAAAAAAAA
+#define DDRSS_PHY_808_DATA 0x00005555
+#define DDRSS_PHY_809_DATA 0x01000100
+#define DDRSS_PHY_810_DATA 0x00800180
+#define DDRSS_PHY_811_DATA 0x00000000
+#define DDRSS_PHY_812_DATA 0x00000000
+#define DDRSS_PHY_813_DATA 0x00000000
+#define DDRSS_PHY_814_DATA 0x00000000
+#define DDRSS_PHY_815_DATA 0x00000000
+#define DDRSS_PHY_816_DATA 0x00000000
+#define DDRSS_PHY_817_DATA 0x00000000
+#define DDRSS_PHY_818_DATA 0x00000000
+#define DDRSS_PHY_819_DATA 0x00000000
+#define DDRSS_PHY_820_DATA 0x00000000
+#define DDRSS_PHY_821_DATA 0x00000000
+#define DDRSS_PHY_822_DATA 0x00000000
+#define DDRSS_PHY_823_DATA 0x00000000
+#define DDRSS_PHY_824_DATA 0x00000000
+#define DDRSS_PHY_825_DATA 0x00000000
+#define DDRSS_PHY_826_DATA 0x00000000
+#define DDRSS_PHY_827_DATA 0x00000000
+#define DDRSS_PHY_828_DATA 0x00000000
+#define DDRSS_PHY_829_DATA 0x00000000
+#define DDRSS_PHY_830_DATA 0x00000000
+#define DDRSS_PHY_831_DATA 0x00000000
+#define DDRSS_PHY_832_DATA 0x00000000
+#define DDRSS_PHY_833_DATA 0x00000000
+#define DDRSS_PHY_834_DATA 0x00000104
+#define DDRSS_PHY_835_DATA 0x00000120
+#define DDRSS_PHY_836_DATA 0x00000000
+#define DDRSS_PHY_837_DATA 0x00000000
+#define DDRSS_PHY_838_DATA 0x00000000
+#define DDRSS_PHY_839_DATA 0x00000000
+#define DDRSS_PHY_840_DATA 0x00000000
+#define DDRSS_PHY_841_DATA 0x00000000
+#define DDRSS_PHY_842_DATA 0x00000000
+#define DDRSS_PHY_843_DATA 0x00000001
+#define DDRSS_PHY_844_DATA 0x07FF0000
+#define DDRSS_PHY_845_DATA 0x0080081F
+#define DDRSS_PHY_846_DATA 0x00081020
+#define DDRSS_PHY_847_DATA 0x04010000
+#define DDRSS_PHY_848_DATA 0x00000000
+#define DDRSS_PHY_849_DATA 0x00000000
+#define DDRSS_PHY_850_DATA 0x00000000
+#define DDRSS_PHY_851_DATA 0x00000100
+#define DDRSS_PHY_852_DATA 0x01CC0B01
+#define DDRSS_PHY_853_DATA 0x1003CC0B
+#define DDRSS_PHY_854_DATA 0x20000140
+#define DDRSS_PHY_855_DATA 0x07FF0200
+#define DDRSS_PHY_856_DATA 0x0000DD01
+#define DDRSS_PHY_857_DATA 0x10100303
+#define DDRSS_PHY_858_DATA 0x10101010
+#define DDRSS_PHY_859_DATA 0x10101010
+#define DDRSS_PHY_860_DATA 0x00011010
+#define DDRSS_PHY_861_DATA 0x00100010
+#define DDRSS_PHY_862_DATA 0x00100010
+#define DDRSS_PHY_863_DATA 0x00100010
+#define DDRSS_PHY_864_DATA 0x00100010
+#define DDRSS_PHY_865_DATA 0x00050010
+#define DDRSS_PHY_866_DATA 0x51517041
+#define DDRSS_PHY_867_DATA 0x31C06000
+#define DDRSS_PHY_868_DATA 0x07AB0340
+#define DDRSS_PHY_869_DATA 0x00C0C001
+#define DDRSS_PHY_870_DATA 0x05040001
+#define DDRSS_PHY_871_DATA 0x10001000
+#define DDRSS_PHY_872_DATA 0x0C053E42
+#define DDRSS_PHY_873_DATA 0x0F0C1D01
+#define DDRSS_PHY_874_DATA 0x01000140
+#define DDRSS_PHY_875_DATA 0x0C000420
+#define DDRSS_PHY_876_DATA 0x000001CC
+#define DDRSS_PHY_877_DATA 0x0A0000D0
+#define DDRSS_PHY_878_DATA 0x00030200
+#define DDRSS_PHY_879_DATA 0x02800000
+#define DDRSS_PHY_880_DATA 0x80800000
+#define DDRSS_PHY_881_DATA 0x00052010
+#define DDRSS_PHY_882_DATA 0x76543210
+#define DDRSS_PHY_883_DATA 0x00000008
+#define DDRSS_PHY_884_DATA 0x02800280
+#define DDRSS_PHY_885_DATA 0x02800280
+#define DDRSS_PHY_886_DATA 0x02800280
+#define DDRSS_PHY_887_DATA 0x02800280
+#define DDRSS_PHY_888_DATA 0x00000280
+#define DDRSS_PHY_889_DATA 0x0000A000
+#define DDRSS_PHY_890_DATA 0x00A000A0
+#define DDRSS_PHY_891_DATA 0x00A000A0
+#define DDRSS_PHY_892_DATA 0x00A000A0
+#define DDRSS_PHY_893_DATA 0x00A000A0
+#define DDRSS_PHY_894_DATA 0x00A000A0
+#define DDRSS_PHY_895_DATA 0x00A000A0
+#define DDRSS_PHY_896_DATA 0x00A000A0
+#define DDRSS_PHY_897_DATA 0x00A000A0
+#define DDRSS_PHY_898_DATA 0x011900A0
+#define DDRSS_PHY_899_DATA 0x01A00002
+#define DDRSS_PHY_900_DATA 0x00000000
+#define DDRSS_PHY_901_DATA 0x00000000
+#define DDRSS_PHY_902_DATA 0x00080200
+#define DDRSS_PHY_903_DATA 0x00000000
+#define DDRSS_PHY_904_DATA 0x20202010
+#define DDRSS_PHY_905_DATA 0x20202020
+#define DDRSS_PHY_906_DATA 0xF0F02020
+#define DDRSS_PHY_907_DATA 0x00000000
+#define DDRSS_PHY_908_DATA 0x00000000
+#define DDRSS_PHY_909_DATA 0x00000000
+#define DDRSS_PHY_910_DATA 0x00000000
+#define DDRSS_PHY_911_DATA 0x00000000
+#define DDRSS_PHY_912_DATA 0x00000000
+#define DDRSS_PHY_913_DATA 0x00000000
+#define DDRSS_PHY_914_DATA 0x00000000
+#define DDRSS_PHY_915_DATA 0x00000000
+#define DDRSS_PHY_916_DATA 0x00000000
+#define DDRSS_PHY_917_DATA 0x00000000
+#define DDRSS_PHY_918_DATA 0x00000000
+#define DDRSS_PHY_919_DATA 0x00000000
+#define DDRSS_PHY_920_DATA 0x00000000
+#define DDRSS_PHY_921_DATA 0x00000000
+#define DDRSS_PHY_922_DATA 0x00000000
+#define DDRSS_PHY_923_DATA 0x00000000
+#define DDRSS_PHY_924_DATA 0x00000000
+#define DDRSS_PHY_925_DATA 0x00000000
+#define DDRSS_PHY_926_DATA 0x00000000
+#define DDRSS_PHY_927_DATA 0x00000000
+#define DDRSS_PHY_928_DATA 0x00000000
+#define DDRSS_PHY_929_DATA 0x00000000
+#define DDRSS_PHY_930_DATA 0x00000000
+#define DDRSS_PHY_931_DATA 0x00000000
+#define DDRSS_PHY_932_DATA 0x00000000
+#define DDRSS_PHY_933_DATA 0x00000000
+#define DDRSS_PHY_934_DATA 0x00000000
+#define DDRSS_PHY_935_DATA 0x00000000
+#define DDRSS_PHY_936_DATA 0x00000000
+#define DDRSS_PHY_937_DATA 0x00000000
+#define DDRSS_PHY_938_DATA 0x00000000
+#define DDRSS_PHY_939_DATA 0x00000000
+#define DDRSS_PHY_940_DATA 0x00000000
+#define DDRSS_PHY_941_DATA 0x00000000
+#define DDRSS_PHY_942_DATA 0x00000000
+#define DDRSS_PHY_943_DATA 0x00000000
+#define DDRSS_PHY_944_DATA 0x00000000
+#define DDRSS_PHY_945_DATA 0x00000000
+#define DDRSS_PHY_946_DATA 0x00000000
+#define DDRSS_PHY_947_DATA 0x00000000
+#define DDRSS_PHY_948_DATA 0x00000000
+#define DDRSS_PHY_949_DATA 0x00000000
+#define DDRSS_PHY_950_DATA 0x00000000
+#define DDRSS_PHY_951_DATA 0x00000000
+#define DDRSS_PHY_952_DATA 0x00000000
+#define DDRSS_PHY_953_DATA 0x00000000
+#define DDRSS_PHY_954_DATA 0x00000000
+#define DDRSS_PHY_955_DATA 0x00000000
+#define DDRSS_PHY_956_DATA 0x00000000
+#define DDRSS_PHY_957_DATA 0x00000000
+#define DDRSS_PHY_958_DATA 0x00000000
+#define DDRSS_PHY_959_DATA 0x00000000
+#define DDRSS_PHY_960_DATA 0x00000000
+#define DDRSS_PHY_961_DATA 0x00000000
+#define DDRSS_PHY_962_DATA 0x00000000
+#define DDRSS_PHY_963_DATA 0x00000000
+#define DDRSS_PHY_964_DATA 0x00000000
+#define DDRSS_PHY_965_DATA 0x00000000
+#define DDRSS_PHY_966_DATA 0x00000000
+#define DDRSS_PHY_967_DATA 0x00000000
+#define DDRSS_PHY_968_DATA 0x00000000
+#define DDRSS_PHY_969_DATA 0x00000000
+#define DDRSS_PHY_970_DATA 0x00000000
+#define DDRSS_PHY_971_DATA 0x00000000
+#define DDRSS_PHY_972_DATA 0x00000000
+#define DDRSS_PHY_973_DATA 0x00000000
+#define DDRSS_PHY_974_DATA 0x00000000
+#define DDRSS_PHY_975_DATA 0x00000000
+#define DDRSS_PHY_976_DATA 0x00000000
+#define DDRSS_PHY_977_DATA 0x00000000
+#define DDRSS_PHY_978_DATA 0x00000000
+#define DDRSS_PHY_979_DATA 0x00000000
+#define DDRSS_PHY_980_DATA 0x00000000
+#define DDRSS_PHY_981_DATA 0x00000000
+#define DDRSS_PHY_982_DATA 0x00000000
+#define DDRSS_PHY_983_DATA 0x00000000
+#define DDRSS_PHY_984_DATA 0x00000000
+#define DDRSS_PHY_985_DATA 0x00000000
+#define DDRSS_PHY_986_DATA 0x00000000
+#define DDRSS_PHY_987_DATA 0x00000000
+#define DDRSS_PHY_988_DATA 0x00000000
+#define DDRSS_PHY_989_DATA 0x00000000
+#define DDRSS_PHY_990_DATA 0x00000000
+#define DDRSS_PHY_991_DATA 0x00000000
+#define DDRSS_PHY_992_DATA 0x00000000
+#define DDRSS_PHY_993_DATA 0x00000000
+#define DDRSS_PHY_994_DATA 0x00000000
+#define DDRSS_PHY_995_DATA 0x00000000
+#define DDRSS_PHY_996_DATA 0x00000000
+#define DDRSS_PHY_997_DATA 0x00000000
+#define DDRSS_PHY_998_DATA 0x00000000
+#define DDRSS_PHY_999_DATA 0x00000000
+#define DDRSS_PHY_1000_DATA 0x00000000
+#define DDRSS_PHY_1001_DATA 0x00000000
+#define DDRSS_PHY_1002_DATA 0x00000000
+#define DDRSS_PHY_1003_DATA 0x00000000
+#define DDRSS_PHY_1004_DATA 0x00000000
+#define DDRSS_PHY_1005_DATA 0x00000000
+#define DDRSS_PHY_1006_DATA 0x00000000
+#define DDRSS_PHY_1007_DATA 0x00000000
+#define DDRSS_PHY_1008_DATA 0x00000000
+#define DDRSS_PHY_1009_DATA 0x00000000
+#define DDRSS_PHY_1010_DATA 0x00000000
+#define DDRSS_PHY_1011_DATA 0x00000000
+#define DDRSS_PHY_1012_DATA 0x00000000
+#define DDRSS_PHY_1013_DATA 0x00000000
+#define DDRSS_PHY_1014_DATA 0x00000000
+#define DDRSS_PHY_1015_DATA 0x00000000
+#define DDRSS_PHY_1016_DATA 0x00000000
+#define DDRSS_PHY_1017_DATA 0x00000000
+#define DDRSS_PHY_1018_DATA 0x00000000
+#define DDRSS_PHY_1019_DATA 0x00000000
+#define DDRSS_PHY_1020_DATA 0x00000000
+#define DDRSS_PHY_1021_DATA 0x00000000
+#define DDRSS_PHY_1022_DATA 0x00000000
+#define DDRSS_PHY_1023_DATA 0x00000000
+#define DDRSS_PHY_1024_DATA 0x00000000
+#define DDRSS_PHY_1025_DATA 0x00000000
+#define DDRSS_PHY_1026_DATA 0x00000000
+#define DDRSS_PHY_1027_DATA 0x00000000
+#define DDRSS_PHY_1028_DATA 0x00000000
+#define DDRSS_PHY_1029_DATA 0x00000100
+#define DDRSS_PHY_1030_DATA 0x00000200
+#define DDRSS_PHY_1031_DATA 0x00000000
+#define DDRSS_PHY_1032_DATA 0x00000000
+#define DDRSS_PHY_1033_DATA 0x00000000
+#define DDRSS_PHY_1034_DATA 0x00000000
+#define DDRSS_PHY_1035_DATA 0x00400000
+#define DDRSS_PHY_1036_DATA 0x00000080
+#define DDRSS_PHY_1037_DATA 0x00DCBA98
+#define DDRSS_PHY_1038_DATA 0x03000000
+#define DDRSS_PHY_1039_DATA 0x00200000
+#define DDRSS_PHY_1040_DATA 0x00000000
+#define DDRSS_PHY_1041_DATA 0x00000000
+#define DDRSS_PHY_1042_DATA 0x00000000
+#define DDRSS_PHY_1043_DATA 0x00000000
+#define DDRSS_PHY_1044_DATA 0x00000000
+#define DDRSS_PHY_1045_DATA 0x0000002A
+#define DDRSS_PHY_1046_DATA 0x00000015
+#define DDRSS_PHY_1047_DATA 0x00000015
+#define DDRSS_PHY_1048_DATA 0x0000002A
+#define DDRSS_PHY_1049_DATA 0x00000033
+#define DDRSS_PHY_1050_DATA 0x0000000C
+#define DDRSS_PHY_1051_DATA 0x0000000C
+#define DDRSS_PHY_1052_DATA 0x00000033
+#define DDRSS_PHY_1053_DATA 0x00543210
+#define DDRSS_PHY_1054_DATA 0x003F0000
+#define DDRSS_PHY_1055_DATA 0x000F013F
+#define DDRSS_PHY_1056_DATA 0x20202003
+#define DDRSS_PHY_1057_DATA 0x00202020
+#define DDRSS_PHY_1058_DATA 0x20008008
+#define DDRSS_PHY_1059_DATA 0x00000810
+#define DDRSS_PHY_1060_DATA 0x00000F00
+#define DDRSS_PHY_1061_DATA 0x00000000
+#define DDRSS_PHY_1062_DATA 0x00000000
+#define DDRSS_PHY_1063_DATA 0x00000000
+#define DDRSS_PHY_1064_DATA 0x000205BB
+#define DDRSS_PHY_1065_DATA 0x00030000
+#define DDRSS_PHY_1066_DATA 0x00000300
+#define DDRSS_PHY_1067_DATA 0x00000300
+#define DDRSS_PHY_1068_DATA 0x00000300
+#define DDRSS_PHY_1069_DATA 0x00000300
+#define DDRSS_PHY_1070_DATA 0x00000300
+#define DDRSS_PHY_1071_DATA 0x42080010
+#define DDRSS_PHY_1072_DATA 0x0000803E
+#define DDRSS_PHY_1073_DATA 0x00000001
+#define DDRSS_PHY_1074_DATA 0x01000102
+#define DDRSS_PHY_1075_DATA 0x00008000
+#define DDRSS_PHY_1076_DATA 0x00000000
+#define DDRSS_PHY_1077_DATA 0x00000000
+#define DDRSS_PHY_1078_DATA 0x00000000
+#define DDRSS_PHY_1079_DATA 0x00000000
+#define DDRSS_PHY_1080_DATA 0x00000000
+#define DDRSS_PHY_1081_DATA 0x00000000
+#define DDRSS_PHY_1082_DATA 0x00000000
+#define DDRSS_PHY_1083_DATA 0x00000000
+#define DDRSS_PHY_1084_DATA 0x00000000
+#define DDRSS_PHY_1085_DATA 0x00000000
+#define DDRSS_PHY_1086_DATA 0x00000000
+#define DDRSS_PHY_1087_DATA 0x00000000
+#define DDRSS_PHY_1088_DATA 0x00000000
+#define DDRSS_PHY_1089_DATA 0x00000000
+#define DDRSS_PHY_1090_DATA 0x00000000
+#define DDRSS_PHY_1091_DATA 0x00000000
+#define DDRSS_PHY_1092_DATA 0x00000000
+#define DDRSS_PHY_1093_DATA 0x00000000
+#define DDRSS_PHY_1094_DATA 0x00000000
+#define DDRSS_PHY_1095_DATA 0x00000000
+#define DDRSS_PHY_1096_DATA 0x00000000
+#define DDRSS_PHY_1097_DATA 0x00000000
+#define DDRSS_PHY_1098_DATA 0x00000000
+#define DDRSS_PHY_1099_DATA 0x00000000
+#define DDRSS_PHY_1100_DATA 0x00000000
+#define DDRSS_PHY_1101_DATA 0x00000000
+#define DDRSS_PHY_1102_DATA 0x00000000
+#define DDRSS_PHY_1103_DATA 0x00000000
+#define DDRSS_PHY_1104_DATA 0x00000000
+#define DDRSS_PHY_1105_DATA 0x00000000
+#define DDRSS_PHY_1106_DATA 0x00000000
+#define DDRSS_PHY_1107_DATA 0x00000000
+#define DDRSS_PHY_1108_DATA 0x00000000
+#define DDRSS_PHY_1109_DATA 0x00000000
+#define DDRSS_PHY_1110_DATA 0x00000000
+#define DDRSS_PHY_1111_DATA 0x00000000
+#define DDRSS_PHY_1112_DATA 0x00000000
+#define DDRSS_PHY_1113_DATA 0x00000000
+#define DDRSS_PHY_1114_DATA 0x00000000
+#define DDRSS_PHY_1115_DATA 0x00000000
+#define DDRSS_PHY_1116_DATA 0x00000000
+#define DDRSS_PHY_1117_DATA 0x00000000
+#define DDRSS_PHY_1118_DATA 0x00000000
+#define DDRSS_PHY_1119_DATA 0x00000000
+#define DDRSS_PHY_1120_DATA 0x00000000
+#define DDRSS_PHY_1121_DATA 0x00000000
+#define DDRSS_PHY_1122_DATA 0x00000000
+#define DDRSS_PHY_1123_DATA 0x00000000
+#define DDRSS_PHY_1124_DATA 0x00000000
+#define DDRSS_PHY_1125_DATA 0x00000000
+#define DDRSS_PHY_1126_DATA 0x00000000
+#define DDRSS_PHY_1127_DATA 0x00000000
+#define DDRSS_PHY_1128_DATA 0x00000000
+#define DDRSS_PHY_1129_DATA 0x00000000
+#define DDRSS_PHY_1130_DATA 0x00000000
+#define DDRSS_PHY_1131_DATA 0x00000000
+#define DDRSS_PHY_1132_DATA 0x00000000
+#define DDRSS_PHY_1133_DATA 0x00000000
+#define DDRSS_PHY_1134_DATA 0x00000000
+#define DDRSS_PHY_1135_DATA 0x00000000
+#define DDRSS_PHY_1136_DATA 0x00000000
+#define DDRSS_PHY_1137_DATA 0x00000000
+#define DDRSS_PHY_1138_DATA 0x00000000
+#define DDRSS_PHY_1139_DATA 0x00000000
+#define DDRSS_PHY_1140_DATA 0x00000000
+#define DDRSS_PHY_1141_DATA 0x00000000
+#define DDRSS_PHY_1142_DATA 0x00000000
+#define DDRSS_PHY_1143_DATA 0x00000000
+#define DDRSS_PHY_1144_DATA 0x00000000
+#define DDRSS_PHY_1145_DATA 0x00000000
+#define DDRSS_PHY_1146_DATA 0x00000000
+#define DDRSS_PHY_1147_DATA 0x00000000
+#define DDRSS_PHY_1148_DATA 0x00000000
+#define DDRSS_PHY_1149_DATA 0x00000000
+#define DDRSS_PHY_1150_DATA 0x00000000
+#define DDRSS_PHY_1151_DATA 0x00000000
+#define DDRSS_PHY_1152_DATA 0x00000000
+#define DDRSS_PHY_1153_DATA 0x00000000
+#define DDRSS_PHY_1154_DATA 0x00000000
+#define DDRSS_PHY_1155_DATA 0x00000000
+#define DDRSS_PHY_1156_DATA 0x00000000
+#define DDRSS_PHY_1157_DATA 0x00000000
+#define DDRSS_PHY_1158_DATA 0x00000000
+#define DDRSS_PHY_1159_DATA 0x00000000
+#define DDRSS_PHY_1160_DATA 0x00000000
+#define DDRSS_PHY_1161_DATA 0x00000000
+#define DDRSS_PHY_1162_DATA 0x00000000
+#define DDRSS_PHY_1163_DATA 0x00000000
+#define DDRSS_PHY_1164_DATA 0x00000000
+#define DDRSS_PHY_1165_DATA 0x00000000
+#define DDRSS_PHY_1166_DATA 0x00000000
+#define DDRSS_PHY_1167_DATA 0x00000000
+#define DDRSS_PHY_1168_DATA 0x00000000
+#define DDRSS_PHY_1169_DATA 0x00000000
+#define DDRSS_PHY_1170_DATA 0x00000000
+#define DDRSS_PHY_1171_DATA 0x00000000
+#define DDRSS_PHY_1172_DATA 0x00000000
+#define DDRSS_PHY_1173_DATA 0x00000000
+#define DDRSS_PHY_1174_DATA 0x00000000
+#define DDRSS_PHY_1175_DATA 0x00000000
+#define DDRSS_PHY_1176_DATA 0x00000000
+#define DDRSS_PHY_1177_DATA 0x00000000
+#define DDRSS_PHY_1178_DATA 0x00000000
+#define DDRSS_PHY_1179_DATA 0x00000000
+#define DDRSS_PHY_1180_DATA 0x00000000
+#define DDRSS_PHY_1181_DATA 0x00000000
+#define DDRSS_PHY_1182_DATA 0x00000000
+#define DDRSS_PHY_1183_DATA 0x00000000
+#define DDRSS_PHY_1184_DATA 0x00000000
+#define DDRSS_PHY_1185_DATA 0x00000000
+#define DDRSS_PHY_1186_DATA 0x00000000
+#define DDRSS_PHY_1187_DATA 0x00000000
+#define DDRSS_PHY_1188_DATA 0x00000000
+#define DDRSS_PHY_1189_DATA 0x00000000
+#define DDRSS_PHY_1190_DATA 0x00000000
+#define DDRSS_PHY_1191_DATA 0x00000000
+#define DDRSS_PHY_1192_DATA 0x00000000
+#define DDRSS_PHY_1193_DATA 0x00000000
+#define DDRSS_PHY_1194_DATA 0x00000000
+#define DDRSS_PHY_1195_DATA 0x00000000
+#define DDRSS_PHY_1196_DATA 0x00000000
+#define DDRSS_PHY_1197_DATA 0x00000000
+#define DDRSS_PHY_1198_DATA 0x00000000
+#define DDRSS_PHY_1199_DATA 0x00000000
+#define DDRSS_PHY_1200_DATA 0x00000000
+#define DDRSS_PHY_1201_DATA 0x00000000
+#define DDRSS_PHY_1202_DATA 0x00000000
+#define DDRSS_PHY_1203_DATA 0x00000000
+#define DDRSS_PHY_1204_DATA 0x00000000
+#define DDRSS_PHY_1205_DATA 0x00000000
+#define DDRSS_PHY_1206_DATA 0x00000000
+#define DDRSS_PHY_1207_DATA 0x00000000
+#define DDRSS_PHY_1208_DATA 0x00000000
+#define DDRSS_PHY_1209_DATA 0x00000000
+#define DDRSS_PHY_1210_DATA 0x00000000
+#define DDRSS_PHY_1211_DATA 0x00000000
+#define DDRSS_PHY_1212_DATA 0x00000000
+#define DDRSS_PHY_1213_DATA 0x00000000
+#define DDRSS_PHY_1214_DATA 0x00000000
+#define DDRSS_PHY_1215_DATA 0x00000000
+#define DDRSS_PHY_1216_DATA 0x00000000
+#define DDRSS_PHY_1217_DATA 0x00000000
+#define DDRSS_PHY_1218_DATA 0x00000000
+#define DDRSS_PHY_1219_DATA 0x00000000
+#define DDRSS_PHY_1220_DATA 0x00000000
+#define DDRSS_PHY_1221_DATA 0x00000000
+#define DDRSS_PHY_1222_DATA 0x00000000
+#define DDRSS_PHY_1223_DATA 0x00000000
+#define DDRSS_PHY_1224_DATA 0x00000000
+#define DDRSS_PHY_1225_DATA 0x00000000
+#define DDRSS_PHY_1226_DATA 0x00000000
+#define DDRSS_PHY_1227_DATA 0x00000000
+#define DDRSS_PHY_1228_DATA 0x00000000
+#define DDRSS_PHY_1229_DATA 0x00000000
+#define DDRSS_PHY_1230_DATA 0x00000000
+#define DDRSS_PHY_1231_DATA 0x00000000
+#define DDRSS_PHY_1232_DATA 0x00000000
+#define DDRSS_PHY_1233_DATA 0x00000000
+#define DDRSS_PHY_1234_DATA 0x00000000
+#define DDRSS_PHY_1235_DATA 0x00000000
+#define DDRSS_PHY_1236_DATA 0x00000000
+#define DDRSS_PHY_1237_DATA 0x00000000
+#define DDRSS_PHY_1238_DATA 0x00000000
+#define DDRSS_PHY_1239_DATA 0x00000000
+#define DDRSS_PHY_1240_DATA 0x00000000
+#define DDRSS_PHY_1241_DATA 0x00000000
+#define DDRSS_PHY_1242_DATA 0x00000000
+#define DDRSS_PHY_1243_DATA 0x00000000
+#define DDRSS_PHY_1244_DATA 0x00000000
+#define DDRSS_PHY_1245_DATA 0x00000000
+#define DDRSS_PHY_1246_DATA 0x00000000
+#define DDRSS_PHY_1247_DATA 0x00000000
+#define DDRSS_PHY_1248_DATA 0x00000000
+#define DDRSS_PHY_1249_DATA 0x00000000
+#define DDRSS_PHY_1250_DATA 0x00000000
+#define DDRSS_PHY_1251_DATA 0x00000000
+#define DDRSS_PHY_1252_DATA 0x00000000
+#define DDRSS_PHY_1253_DATA 0x00000000
+#define DDRSS_PHY_1254_DATA 0x00000000
+#define DDRSS_PHY_1255_DATA 0x00000000
+#define DDRSS_PHY_1256_DATA 0x00000000
+#define DDRSS_PHY_1257_DATA 0x00000000
+#define DDRSS_PHY_1258_DATA 0x00000000
+#define DDRSS_PHY_1259_DATA 0x00000000
+#define DDRSS_PHY_1260_DATA 0x00000000
+#define DDRSS_PHY_1261_DATA 0x00000000
+#define DDRSS_PHY_1262_DATA 0x00000000
+#define DDRSS_PHY_1263_DATA 0x00000000
+#define DDRSS_PHY_1264_DATA 0x00000000
+#define DDRSS_PHY_1265_DATA 0x00000000
+#define DDRSS_PHY_1266_DATA 0x00000000
+#define DDRSS_PHY_1267_DATA 0x00000000
+#define DDRSS_PHY_1268_DATA 0x00000000
+#define DDRSS_PHY_1269_DATA 0x00000000
+#define DDRSS_PHY_1270_DATA 0x00000000
+#define DDRSS_PHY_1271_DATA 0x00000000
+#define DDRSS_PHY_1272_DATA 0x00000000
+#define DDRSS_PHY_1273_DATA 0x00000000
+#define DDRSS_PHY_1274_DATA 0x00000000
+#define DDRSS_PHY_1275_DATA 0x00000000
+#define DDRSS_PHY_1276_DATA 0x00000000
+#define DDRSS_PHY_1277_DATA 0x00000000
+#define DDRSS_PHY_1278_DATA 0x00000000
+#define DDRSS_PHY_1279_DATA 0x00000000
+#define DDRSS_PHY_1280_DATA 0x00000000
+#define DDRSS_PHY_1281_DATA 0x00010100
+#define DDRSS_PHY_1282_DATA 0x00000000
+#define DDRSS_PHY_1283_DATA 0x00000000
+#define DDRSS_PHY_1284_DATA 0x00050000
+#define DDRSS_PHY_1285_DATA 0x04000000
+#define DDRSS_PHY_1286_DATA 0x00000055
+#define DDRSS_PHY_1287_DATA 0x00000000
+#define DDRSS_PHY_1288_DATA 0x00000000
+#define DDRSS_PHY_1289_DATA 0x00000000
+#define DDRSS_PHY_1290_DATA 0x00000000
+#define DDRSS_PHY_1291_DATA 0x00002001
+#define DDRSS_PHY_1292_DATA 0x0000400F
+#define DDRSS_PHY_1293_DATA 0x50020028
+#define DDRSS_PHY_1294_DATA 0x01010000
+#define DDRSS_PHY_1295_DATA 0x80080001
+#define DDRSS_PHY_1296_DATA 0x10200000
+#define DDRSS_PHY_1297_DATA 0x00000008
+#define DDRSS_PHY_1298_DATA 0x00000000
+#define DDRSS_PHY_1299_DATA 0x01090E00
+#define DDRSS_PHY_1300_DATA 0x00040101
+#define DDRSS_PHY_1301_DATA 0x0000010F
+#define DDRSS_PHY_1302_DATA 0x00000000
+#define DDRSS_PHY_1303_DATA 0x0000FFFF
+#define DDRSS_PHY_1304_DATA 0x00000000
+#define DDRSS_PHY_1305_DATA 0x01010000
+#define DDRSS_PHY_1306_DATA 0x01080402
+#define DDRSS_PHY_1307_DATA 0x01200F02
+#define DDRSS_PHY_1308_DATA 0x00194280
+#define DDRSS_PHY_1309_DATA 0x00000004
+#define DDRSS_PHY_1310_DATA 0x00050000
+#define DDRSS_PHY_1311_DATA 0x00000000
+#define DDRSS_PHY_1312_DATA 0x00000000
+#define DDRSS_PHY_1313_DATA 0x00000000
+#define DDRSS_PHY_1314_DATA 0x00000000
+#define DDRSS_PHY_1315_DATA 0x00000000
+#define DDRSS_PHY_1316_DATA 0x00000000
+#define DDRSS_PHY_1317_DATA 0x01000000
+#define DDRSS_PHY_1318_DATA 0x00000705
+#define DDRSS_PHY_1319_DATA 0x00000054
+#define DDRSS_PHY_1320_DATA 0x00030820
+#define DDRSS_PHY_1321_DATA 0x00010820
+#define DDRSS_PHY_1322_DATA 0x00010820
+#define DDRSS_PHY_1323_DATA 0x00010820
+#define DDRSS_PHY_1324_DATA 0x00010820
+#define DDRSS_PHY_1325_DATA 0x00010820
+#define DDRSS_PHY_1326_DATA 0x00010820
+#define DDRSS_PHY_1327_DATA 0x00010820
+#define DDRSS_PHY_1328_DATA 0x00010820
+#define DDRSS_PHY_1329_DATA 0x00000000
+#define DDRSS_PHY_1330_DATA 0x00000074
+#define DDRSS_PHY_1331_DATA 0x00000400
+#define DDRSS_PHY_1332_DATA 0x00000108
+#define DDRSS_PHY_1333_DATA 0x00000000
+#define DDRSS_PHY_1334_DATA 0x00000000
+#define DDRSS_PHY_1335_DATA 0x00000000
+#define DDRSS_PHY_1336_DATA 0x00000000
+#define DDRSS_PHY_1337_DATA 0x00000000
+#define DDRSS_PHY_1338_DATA 0x03000000
+#define DDRSS_PHY_1339_DATA 0x00000000
+#define DDRSS_PHY_1340_DATA 0x00000000
+#define DDRSS_PHY_1341_DATA 0x00000000
+#define DDRSS_PHY_1342_DATA 0x04102006
+#define DDRSS_PHY_1343_DATA 0x00041020
+#define DDRSS_PHY_1344_DATA 0x01C98C98
+#define DDRSS_PHY_1345_DATA 0x3F400000
+#define DDRSS_PHY_1346_DATA 0x3F3F1F3F
+#define DDRSS_PHY_1347_DATA 0x0000001F
+#define DDRSS_PHY_1348_DATA 0x00000000
+#define DDRSS_PHY_1349_DATA 0x00000000
+#define DDRSS_PHY_1350_DATA 0x00000000
+#define DDRSS_PHY_1351_DATA 0x00010000
+#define DDRSS_PHY_1352_DATA 0x00000000
+#define DDRSS_PHY_1353_DATA 0x00000000
+#define DDRSS_PHY_1354_DATA 0x00000000
+#define DDRSS_PHY_1355_DATA 0x00000000
+#define DDRSS_PHY_1356_DATA 0x76543210
+#define DDRSS_PHY_1357_DATA 0x00010198
+#define DDRSS_PHY_1358_DATA 0x00000000
+#define DDRSS_PHY_1359_DATA 0x00000000
+#define DDRSS_PHY_1360_DATA 0x00000000
+#define DDRSS_PHY_1361_DATA 0x00040700
+#define DDRSS_PHY_1362_DATA 0x00000000
+#define DDRSS_PHY_1363_DATA 0x00000000
+#define DDRSS_PHY_1364_DATA 0x00000000
+#define DDRSS_PHY_1365_DATA 0x00000000
+#define DDRSS_PHY_1366_DATA 0x00000000
+#define DDRSS_PHY_1367_DATA 0x00000002
+#define DDRSS_PHY_1368_DATA 0x00000000
+#define DDRSS_PHY_1369_DATA 0x00000000
+#define DDRSS_PHY_1370_DATA 0x00000000
+#define DDRSS_PHY_1371_DATA 0x00000000
+#define DDRSS_PHY_1372_DATA 0x00000000
+#define DDRSS_PHY_1373_DATA 0x00000000
+#define DDRSS_PHY_1374_DATA 0x00080000
+#define DDRSS_PHY_1375_DATA 0x000007FF
+#define DDRSS_PHY_1376_DATA 0x00000000
+#define DDRSS_PHY_1377_DATA 0x00000000
+#define DDRSS_PHY_1378_DATA 0x00000000
+#define DDRSS_PHY_1379_DATA 0x00000000
+#define DDRSS_PHY_1380_DATA 0x00000000
+#define DDRSS_PHY_1381_DATA 0x00000000
+#define DDRSS_PHY_1382_DATA 0x000FFFFF
+#define DDRSS_PHY_1383_DATA 0x000FFFFF
+#define DDRSS_PHY_1384_DATA 0x0000FFFF
+#define DDRSS_PHY_1385_DATA 0xFFFFFFF0
+#define DDRSS_PHY_1386_DATA 0x030FFFFF
+#define DDRSS_PHY_1387_DATA 0x01FFFFFF
+#define DDRSS_PHY_1388_DATA 0x0000FFFF
+#define DDRSS_PHY_1389_DATA 0x00000000
+#define DDRSS_PHY_1390_DATA 0x00000000
+#define DDRSS_PHY_1391_DATA 0x00000000
+#define DDRSS_PHY_1392_DATA 0x00000000
+#define DDRSS_PHY_1393_DATA 0x0001F7C0
+#define DDRSS_PHY_1394_DATA 0x00000002
+#define DDRSS_PHY_1395_DATA 0x00000000
+#define DDRSS_PHY_1396_DATA 0x00001142
+#define DDRSS_PHY_1397_DATA 0x010207AB
+#define DDRSS_PHY_1398_DATA 0x01000080
+#define DDRSS_PHY_1399_DATA 0x03900390
+#define DDRSS_PHY_1400_DATA 0x03900390
+#define DDRSS_PHY_1401_DATA 0x00000390
+#define DDRSS_PHY_1402_DATA 0x00000390
+#define DDRSS_PHY_1403_DATA 0x00000390
+#define DDRSS_PHY_1404_DATA 0x00000390
+#define DDRSS_PHY_1405_DATA 0x00000005
+#define DDRSS_PHY_1406_DATA 0x01813FBB
+#define DDRSS_PHY_1407_DATA 0x000000BB
+#define DDRSS_PHY_1408_DATA 0x0C000DFF
+#define DDRSS_PHY_1409_DATA 0x30000DFF
+#define DDRSS_PHY_1410_DATA 0x3F0DFF11
+#define DDRSS_PHY_1411_DATA 0x000100F0
+#define DDRSS_PHY_1412_DATA 0x780DFFBB
+#define DDRSS_PHY_1413_DATA 0x00007E31
+#define DDRSS_PHY_1414_DATA 0x000CBF11
+#define DDRSS_PHY_1415_DATA 0x01770010
+#define DDRSS_PHY_1416_DATA 0x000CBF11
+#define DDRSS_PHY_1417_DATA 0x01770010
+#define DDRSS_PHY_1418_DATA 0x3F0DFF11
+#define DDRSS_PHY_1419_DATA 0x017700F0
+#define DDRSS_PHY_1420_DATA 0x3F0DFF11
+#define DDRSS_PHY_1421_DATA 0x01FF00F0
+#define DDRSS_PHY_1422_DATA 0x20040006
diff --git a/roms/u-boot/arch/arm/dts/k3-j7200-main.dtsi b/roms/u-boot/arch/arm/dts/k3-j7200-main.dtsi
new file mode 100644
index 000000000..113146407
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j7200-main.dtsi
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x70000000 0x100000>;
+
+		atf-sram@0 {
+			reg = <0x00 0x20000>;
+		};
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller0 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <131>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_navss: bus@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <199>;
+
+		main_navss_intr: interrupt-controller1 {
+			compatible = "ti,sci-intr";
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <213>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <209>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x00 0x3c000000 0x00 0x400000>,
+				<0x00 0x38000000 0x00 0x400000>,
+				<0x00 0x31120000 0x00 0x100>,
+				<0x00 0x33000000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg =	<0x00 0x31150000 0x00 0x100>,
+				<0x00 0x34000000 0x00 0x100000>,
+				<0x00 0x35000000 0x00 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x310d0000 0x00 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 201 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c000 0x00 0x2b4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 2>;
+		clock-names = "fclk";
+	};
+
+	main_sdhci0: sdhci@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x0 0x04f80000 0x0 0x260>, <0x0 0x4f88000 0x0 0x134>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 91 3>, <&k3_clks 91 0>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,strobe-sel = <0x77>;
+		ti,trm-icp = <0x8>;
+		bus-width = <8>;
+		mmc-hs200-1_8v;
+		mmc-ddr-1_8v;
+		dma-coherent;
+	};
+
+	main_sdhci1: sdhci@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x0 0x04fb0000 0x0 0x260>, <0x0 0x4fb8000 0x0 0x134>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 92 2>, <&k3_clks 92 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,clkbuf-sel = <0x7>;
+		dma-coherent;
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 1>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 1>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 1>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 1>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 1>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 1>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 1>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <105 0 IRQ_TYPE_EDGE_RISING>,
+			     <105 1 IRQ_TYPE_EDGE_RISING>,
+			     <105 2 IRQ_TYPE_EDGE_RISING>,
+			     <105 3 IRQ_TYPE_EDGE_RISING>,
+			     <105 4 IRQ_TYPE_EDGE_RISING>,
+			     <105 5 IRQ_TYPE_EDGE_RISING>,
+			     <105 6 IRQ_TYPE_EDGE_RISING>,
+			     <105 7 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+	};
+
+	usbss0: cdns-usb@4104000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4104000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 288 12>, <&k3_clks 288 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 288 12>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb0: usb@6000000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6000000 0x00 0x10000>,
+			      <0x00 0x6010000 0x00 0x10000>,
+			      <0x00 0x6020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j7200-r5fss";
+		ti,cluster-mode = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x06 0xFF>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "j7200-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x5d00000 0x00008000>,
+			      <0x5d10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <246>;
+			ti,sci-proc-ids = <0x07 0xFF>;
+			resets = <&k3_reset 246 1>;
+			firmware-name = "j7200-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/roms/u-boot/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
new file mode 100644
index 000000000..ac78d4cb6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: dmsc@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x00 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x40f00000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x00 0x43000014 0x00 0x4>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 2>;
+		clock-names = "fclk";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 2>;
+		clock-names = "fclk";
+	};
+
+	wkup_gpio_intr: interrupt-controller2 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <137>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x00 0x2b800000 0x00 0x400000>,
+				<0x00 0x2b000000 0x00 0x400000>,
+				<0x00 0x28590000 0x00 0x100>,
+				<0x00 0x2a500000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg =	<0x00 0x285c0000 0x00 0x100>,
+				<0x00 0x2a800000 0x00 0x40000>,
+				<0x00 0x2aa00000 0x00 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x46000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 18 21>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 18 21>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 18 2>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 1>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 1>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 1>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+	};
+
+	fss: syscon@47000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x47000000 0x00 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: hbmc-mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,am654-hbmc";
+			reg = <0x00 0x47034000 0x00 0x100>,
+				<0x05 0x00000000 0x01 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			clocks = <&k3_clks 102 0>;
+			assigned-clocks = <&k3_clks 102 5>;
+			assigned-clock-rates = <333333333>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j7200-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x41000000 0x00010000>,
+			      <0x41010000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <250>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 250 1>;
+			firmware-name = "j7200-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <251>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 251 1>;
+			firmware-name = "j7200-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/roms/u-boot/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
new file mode 100644
index 000000000..049143206
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+#include "k3-j7200-ddr-evm-lp4-1600.dtsi"
+#include "k3-j721e-ddr.dtsi"
+
+/ {
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a72_0;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+		tick-timer = &timer1;
+		firmware-loader = &fs_loader0;
+	};
+
+	fs_loader0: fs_loader@0 {
+		u-boot,dm-pre-reloc;
+		compatible = "u-boot,fs-loader";
+	};
+
+	a72_0: a72@0 {
+		compatible = "ti,am654-rproc";
+		reg = <0x0 0x00a90000 0x0 0x10>;
+		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 202 TI_SCI_PD_EXCLUSIVE>;
+		resets = <&k3_reset 202 0>;
+		clocks = <&k3_clks 61 1>;
+		assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>;
+		assigned-clock-rates = <2000000000>, <200000000>;
+		ti,sci = <&dmsc>;
+		ti,sci-proc-id = <32>;
+		ti,sci-host-id = <10>;
+		u-boot,dm-spl;
+	};
+
+	clk_200mhz: dummy_clock_200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		u-boot,dm-spl;
+	};
+
+	clk_19_2mhz: dummy_clock_19_2mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+		u-boot,dm-spl;
+	};
+};
+
+&memorycontroller {
+	power-domains = <&k3_pds 8 TI_SCI_PD_SHARED>,
+			<&k3_pds 90 TI_SCI_PD_SHARED>;
+	clocks = <&k3_clks 8 5>, <&k3_clks 30 9>;
+};
+
+&cbass_mcu_wakeup {
+	mcu_secproxy: secproxy@2a380000 {
+		u-boot,dm-spl;
+		compatible = "ti,am654-secure-proxy";
+		reg = <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>,
+		      <0x0 0x2a480000 0x0 0x80000>;
+		reg-names = "rt", "scfg", "target_data";
+		#mbox-cells = <1>;
+	};
+
+	sysctrler: sysctrler {
+		u-boot,dm-spl;
+		compatible = "ti,am654-system-controller";
+		mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
+		mbox-names = "tx", "rx";
+	};
+};
+
+&dmsc {
+	mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
+	mbox-names = "tx", "rx", "notify";
+	ti,host-id = <4>;
+	ti,secure-host;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+	wkup_uart0_pins_default: wkup_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) WKUP_GPIO0_12.MCU_UART0_TXD */
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) WKUP_GPIO0_15.MCU_UART0_RTSn */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (E20) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
+			J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C21) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (F19) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
+			J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* (E22) MCU_OSPI1_CSn1.MCU_HYPERBUS0_CSn1 */
+			J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (E19) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (D21) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D20) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (G19) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (G20) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (F20) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (F21) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (E21) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (B22) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (G21) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
+		>;
+	};
+
+	wkup_gpio_pins_default: wkup-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xd8, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */
+		>;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+
+	main_uart0_pins_default: main_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
+			J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */
+			J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */
+			J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main_mmc1_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
+			J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
+			J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */
+			J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */
+			J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */
+			J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */
+			J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	main_usbss0_pins_default: main_usbss0_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "okay";
+};
+
+&mcu_uart0 {
+	/delete-property/ power-domains;
+	/delete-property/ clocks;
+	/delete-property/ clock-names;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	status = "okay";
+	clock-frequency = <96000000>;
+};
+
+&main_uart0 {
+	status = "okay";
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_sdhci0 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+	non-removable;
+	bus-width = <8>;
+};
+
+&main_sdhci1 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&hbmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
+	reg = <0x0 0x47040000 0x0 0x100>,
+	      <0x0 0x50000000 0x0 0x8000000>;
+	ranges = <0x0 0x0 0x0 0x50000000 0x4000000>, /* 64MB Flash on CS0 */
+		 <0x1 0x0 0x0 0x54000000 0x800000>; /* 8MB flash on CS1 */
+
+	flash@0,0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+	};
+};
+
+#include "k3-j7200-common-proc-board-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/k3-j7200-som-p0.dtsi b/roms/u-boot/arch/arm/dts/k3-j7200-som-p0.dtsi
new file mode 100644
index 000000000..7b5e9aa03
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j7200-som-p0.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x00 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx0 {
+	mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
+			J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
+			J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+};
+
+&hbmc {
+	/* OSPI and HBMC are muxed inside FSS, Bootloader will enable
+	 * appropriate node based on board detection
+	 */
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
+	ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
+		 <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
+
+	flash@0,0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0x00 0x00 0x4000000>;
+	};
+};
+
+&mailbox0_cluster0 {
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "disabled";
+};
+
+&mailbox0_cluster3 {
+	status = "disabled";
+};
+
+&mailbox0_cluster4 {
+	status = "disabled";
+};
+
+&mailbox0_cluster5 {
+	status = "disabled";
+};
+
+&mailbox0_cluster6 {
+	status = "disabled";
+};
+
+&mailbox0_cluster7 {
+	status = "disabled";
+};
+
+&mailbox0_cluster8 {
+	status = "disabled";
+};
+
+&mailbox0_cluster9 {
+	status = "disabled";
+};
+
+&mailbox0_cluster10 {
+	status = "disabled";
+};
+
+&mailbox0_cluster11 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp_som: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
+				  "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
+				  "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL",
+				  "GPIO_LIN_EN", "CAN_STB";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j7200.dtsi b/roms/u-boot/arch/arm/dts/k3-j7200.dtsi
new file mode 100644
index 000000000..66169bcf7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j7200.dtsi
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+	model = "Texas Instruments K3 J7200 SoC";
+	compatible = "ti,j7200";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart3;
+		serial6 = &main_uart4;
+		serial7 = &main_uart5;
+		serial8 = &main_uart6;
+		serial9 = &main_uart7;
+		serial10 = &main_uart8;
+		serial11 = &main_uart9;
+	};
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <2048>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j7200-main.dtsi"
+#include "k3-j7200-mcu-wakeup.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/roms/u-boot/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
new file mode 100644
index 000000000..fe095a615
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		spi0 = &ospi0;
+		spi1 = &ospi1;
+		remoteproc0 = &mcu_r5fss0_core0;
+		remoteproc1 = &mcu_r5fss0_core1;
+		remoteproc2 = &main_r5fss0_core0;
+		remoteproc3 = &main_r5fss0_core1;
+		remoteproc4 = &main_r5fss1_core0;
+		remoteproc5 = &main_r5fss1_core1;
+		remoteproc6 = &c66_0;
+		remoteproc7 = &c66_1;
+		remoteproc8 = &c71_0;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &mcu_i2c1;
+		i2c3 = &main_i2c0;
+	};
+};
+
+&cbass_main{
+	u-boot,dm-spl;
+
+	main-navss {
+		u-boot,dm-spl;
+	};
+};
+
+&cbass_mcu_wakeup {
+	u-boot,dm-spl;
+
+	timer1: timer@40400000 {
+		compatible = "ti,omap5430-timer";
+		reg = <0x0 0x40400000 0x0 0x80>;
+		ti,timer-alwon;
+		clock-frequency = <25000000>;
+		u-boot,dm-spl;
+	};
+
+	mcu-navss {
+		u-boot,dm-spl;
+
+		ringacc@2b800000 {
+			u-boot,dm-spl;
+		};
+
+		dma-controller@285c0000 {
+			u-boot,dm-spl;
+		};
+	};
+
+	chipid@43000014 {
+		u-boot,dm-spl;
+	};
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&dmsc {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_uart0 {
+	u-boot,dm-spl;
+};
+
+&mcu_uart0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci1 {
+	u-boot,dm-spl;
+};
+
+&main_usbss0_pins_default {
+	u-boot,dm-spl;
+};
+
+&usbss0 {
+	u-boot,dm-spl;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	u-boot,dm-spl;
+};
+
+&mcu_cpsw {
+	reg = <0x0 0x46000000 0x0 0x200000>,
+	      <0x0 0x40f00200 0x0 0x2>;
+	reg-names = "cpsw_nuss", "mac_efuse";
+	/delete-property/ ranges;
+
+	cpsw-phy-sel@40f04040 {
+		compatible = "ti,am654-cpsw-phy-sel";
+		reg= <0x0 0x40f04040 0x0 0x4>;
+		reg-names = "gmii-sel";
+	};
+};
+
+&main_mmc1_pins_default {
+	u-boot,dm-spl;
+};
+
+&wkup_i2c0_pins_default {
+	u-boot,dm-spl;
+};
+
+&wkup_i2c0 {
+	u-boot,dm-spl;
+};
+
+&main_i2c0 {
+	u-boot,dm-spl;
+};
+
+&main_i2c0_pins_default {
+	u-boot,dm-spl;
+};
+
+&exp2 {
+	u-boot,dm-spl;
+};
+
+&mcu_fss0_ospi0_pins_default {
+	u-boot,dm-spl;
+};
+
+&fss {
+	u-boot,dm-spl;
+};
+
+&ospi0 {
+	u-boot,dm-spl;
+
+	flash@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&ospi1 {
+	u-boot,dm-spl;
+
+	flash@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&mcu_fss0_ospi1_pins_default {
+	u-boot,dm-spl;
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+	ti,cluster-mode = <0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-common-proc-board.dts b/roms/u-boot/arch/arm/dts/k3-j721e-common-proc-board.dts
new file mode 100644
index 000000000..60764366e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-common-proc-board.dts
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721e-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
+
+		sw10: sw10 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		sw11: sw11 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: gpio-regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	sound0: sound@0 {
+		compatible = "ti,j721e-cpb-audio";
+		model = "j721e-cpb";
+
+		ti,cpb-mcasp = <&mcasp10>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 184 1>,
+			 <&k3_clks 184 2>, <&k3_clks 184 4>,
+			 <&k3_clks 157 371>,
+			 <&k3_clks 157 400>, <&k3_clks 157 401>;
+		clock-names = "cpb-mcasp-auxclk",
+			      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+			      "cpb-codec-scki",
+			      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
+	};
+};
+
+&main_pmx0 {
+	sw10_button_pins_default: sw10-button-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+			J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
+		>;
+	};
+
+	main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+		>;
+	};
+
+	mcasp10_pins_default: mcasp10-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
+			J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
+			J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
+			J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
+			J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
+			J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
+		>;
+	};
+
+	audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	sw11_button_pins_default: sw11-button-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+			J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+			J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+			J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+			J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+			J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+};
+
+&main_uart0 {
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart3 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart5 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart6 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart7 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart8 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart9 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_gpio2 {
+	status = "disabled";
+};
+
+&main_gpio3 {
+	status = "disabled";
+};
+
+&main_gpio4 {
+	status = "disabled";
+};
+
+&main_gpio5 {
+	status = "disabled";
+};
+
+&main_gpio6 {
+	status = "disabled";
+};
+
+&main_gpio7 {
+	status = "disabled";
+};
+
+&wkup_gpio1 {
+	status = "disabled";
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci2 {
+	/* Unused */
+	status = "disabled";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default>;
+	ti,usb2-only;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&tscadc0 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		p09-hog {
+			/* P11 - MCASP/TRACE_MUX_S0 */
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "MCASP/TRACE_MUX_S0";
+		};
+
+		p10-hog {
+			/* P12 - MCASP/TRACE_MUX_S1 */
+			gpio-hog;
+			gpios = <10 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "MCASP/TRACE_MUX_S1";
+		};
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c1_exp4_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&k3_clks {
+	/* Confiure AUDIO_EXT_REFCLK2 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audi_ext_refclk2_pins_default>;
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+
+		#sound-dai-cells = <1>;
+
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+
+		/* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
+		clocks = <&k3_clks 157 371>;
+		clock-names = "scki";
+
+		/* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
+		assigned-clocks = <&k3_clks 157 371>;
+		assigned-clock-parents = <&k3_clks 157 400>;
+		assigned-clock-rates = <24576000>; /* for 48KHz */
+
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
+};
+
+&main_i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <400000>;
+
+	exp5: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+
+	assigned-clocks = <&k3_clks 152 1>,
+			  <&k3_clks 152 4>,
+			  <&k3_clks 152 9>,
+			  <&k3_clks 152 13>;
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* PLL19_HSDIV0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
+};
+
+&mcasp0 {
+	status = "disabled";
+};
+
+&mcasp1 {
+	status = "disabled";
+};
+
+&mcasp2 {
+	status = "disabled";
+};
+
+&mcasp3 {
+	status = "disabled";
+};
+
+&mcasp4 {
+	status = "disabled";
+};
+
+&mcasp5 {
+	status = "disabled";
+};
+
+&mcasp6 {
+	status = "disabled";
+};
+
+&mcasp7 {
+	status = "disabled";
+};
+
+&mcasp8 {
+	status = "disabled";
+};
+
+&mcasp9 {
+	status = "disabled";
+};
+
+&mcasp10 {
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp10_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 1 1 1
+		2 2 2 0
+	>;
+	tx-num-evt = <0>;
+	rx-num-evt = <0>;
+};
+
+&mcasp11 {
+	status = "disabled";
+};
+
+&serdes0 {
+	serdes0_pcie_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&serdes2 {
+	serdes2_pcie_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>;
+	};
+};
+
+&pcie0_rc {
+	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie2_rc {
+	reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes2_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie0_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+	status = "disabled";
+};
+
+&pcie1_ep {
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
+
+&pcie2_ep {
+	phys = <&serdes2_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
+
+&pcie3_rc {
+	status = "disabled";
+};
+
+&pcie3_ep {
+	status = "disabled";
+};
+
+&dss {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-ddr-evm-lp4-4266.dtsi b/roms/u-boot/arch/arm/dts/k3-j721e-ddr-evm-lp4-4266.dtsi
new file mode 100644
index 000000000..ca05e06e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-ddr-evm-lp4-4266.dtsi
@@ -0,0 +1,2195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * This file was generated by the Jacinto7_DDRSS_RegConfigTool, Revision: 0.5.0
+ * This file was generated on 09/25/2020
+*/
+
+#define DDRSS_PLL_FHS_CNT 10
+#define DDRSS_PLL_FREQUENCY_1 1066500000
+#define DDRSS_PLL_FREQUENCY_2 1066500000
+
+#define DDRSS_CTL_00_DATA 0x00000B00
+#define DDRSS_CTL_01_DATA 0x00000000
+#define DDRSS_CTL_02_DATA 0x00000000
+#define DDRSS_CTL_03_DATA 0x00000000
+#define DDRSS_CTL_04_DATA 0x00000000
+#define DDRSS_CTL_05_DATA 0x00000000
+#define DDRSS_CTL_06_DATA 0x00000000
+#define DDRSS_CTL_07_DATA 0x00002710
+#define DDRSS_CTL_08_DATA 0x000186A0
+#define DDRSS_CTL_09_DATA 0x00000005
+#define DDRSS_CTL_10_DATA 0x00000064
+#define DDRSS_CTL_11_DATA 0x000681C8
+#define DDRSS_CTL_12_DATA 0x004111C9
+#define DDRSS_CTL_13_DATA 0x00000005
+#define DDRSS_CTL_14_DATA 0x000010A9
+#define DDRSS_CTL_15_DATA 0x000681C8
+#define DDRSS_CTL_16_DATA 0x004111C9
+#define DDRSS_CTL_17_DATA 0x00000005
+#define DDRSS_CTL_18_DATA 0x000010A9
+#define DDRSS_CTL_19_DATA 0x01010000
+#define DDRSS_CTL_20_DATA 0x02011001
+#define DDRSS_CTL_21_DATA 0x02010000
+#define DDRSS_CTL_22_DATA 0x00020100
+#define DDRSS_CTL_23_DATA 0x0000000A
+#define DDRSS_CTL_24_DATA 0x00000019
+#define DDRSS_CTL_25_DATA 0x00000000
+#define DDRSS_CTL_26_DATA 0x00000000
+#define DDRSS_CTL_27_DATA 0x02020200
+#define DDRSS_CTL_28_DATA 0x00005656
+#define DDRSS_CTL_29_DATA 0x00100000
+#define DDRSS_CTL_30_DATA 0x00000000
+#define DDRSS_CTL_31_DATA 0x00000000
+#define DDRSS_CTL_32_DATA 0x00000000
+#define DDRSS_CTL_33_DATA 0x00000000
+#define DDRSS_CTL_34_DATA 0x040C0000
+#define DDRSS_CTL_35_DATA 0x12481248
+#define DDRSS_CTL_36_DATA 0x00050804
+#define DDRSS_CTL_37_DATA 0x09040008
+#define DDRSS_CTL_38_DATA 0x15000204
+#define DDRSS_CTL_39_DATA 0x1B60008B
+#define DDRSS_CTL_40_DATA 0x1500422B
+#define DDRSS_CTL_41_DATA 0x1B60008B
+#define DDRSS_CTL_42_DATA 0x2000422B
+#define DDRSS_CTL_43_DATA 0x000A0A09
+#define DDRSS_CTL_44_DATA 0x040006DB
+#define DDRSS_CTL_45_DATA 0x1E161104
+#define DDRSS_CTL_46_DATA 0x10012458
+#define DDRSS_CTL_47_DATA 0x1E161110
+#define DDRSS_CTL_48_DATA 0x10012458
+#define DDRSS_CTL_49_DATA 0x02030410
+#define DDRSS_CTL_50_DATA 0x2C040500
+#define DDRSS_CTL_51_DATA 0x082D2C2D
+#define DDRSS_CTL_52_DATA 0x14000D0A
+#define DDRSS_CTL_53_DATA 0x04010A0A
+#define DDRSS_CTL_54_DATA 0x01010004
+#define DDRSS_CTL_55_DATA 0x04585808
+#define DDRSS_CTL_56_DATA 0x04313104
+#define DDRSS_CTL_57_DATA 0x00003131
+#define DDRSS_CTL_58_DATA 0x00010100
+#define DDRSS_CTL_59_DATA 0x03010000
+#define DDRSS_CTL_60_DATA 0x00000E08
+#define DDRSS_CTL_61_DATA 0x000000BB
+#define DDRSS_CTL_62_DATA 0x00000256
+#define DDRSS_CTL_63_DATA 0x00002073
+#define DDRSS_CTL_64_DATA 0x00000256
+#define DDRSS_CTL_65_DATA 0x00002073
+#define DDRSS_CTL_66_DATA 0x00000005
+#define DDRSS_CTL_67_DATA 0x00030000
+#define DDRSS_CTL_68_DATA 0x00950010
+#define DDRSS_CTL_69_DATA 0x00950408
+#define DDRSS_CTL_70_DATA 0x00400408
+#define DDRSS_CTL_71_DATA 0x00120103
+#define DDRSS_CTL_72_DATA 0x00100005
+#define DDRSS_CTL_73_DATA 0x2F080010
+#define DDRSS_CTL_74_DATA 0x0505012F
+#define DDRSS_CTL_75_DATA 0x0401030A
+#define DDRSS_CTL_76_DATA 0x041E100B
+#define DDRSS_CTL_77_DATA 0x100B0401
+#define DDRSS_CTL_78_DATA 0x0001041E
+#define DDRSS_CTL_79_DATA 0x000F000F
+#define DDRSS_CTL_80_DATA 0x02660266
+#define DDRSS_CTL_81_DATA 0x02660266
+#define DDRSS_CTL_82_DATA 0x03050505
+#define DDRSS_CTL_83_DATA 0x03010303
+#define DDRSS_CTL_84_DATA 0x200B100B
+#define DDRSS_CTL_85_DATA 0x04041004
+#define DDRSS_CTL_86_DATA 0x200B100B
+#define DDRSS_CTL_87_DATA 0x04041004
+#define DDRSS_CTL_88_DATA 0x03010000
+#define DDRSS_CTL_89_DATA 0x00010000
+#define DDRSS_CTL_90_DATA 0x00000000
+#define DDRSS_CTL_91_DATA 0x00000000
+#define DDRSS_CTL_92_DATA 0x01000000
+#define DDRSS_CTL_93_DATA 0x80104002
+#define DDRSS_CTL_94_DATA 0x00000000
+#define DDRSS_CTL_95_DATA 0x00040005
+#define DDRSS_CTL_96_DATA 0x00000000
+#define DDRSS_CTL_97_DATA 0x00050000
+#define DDRSS_CTL_98_DATA 0x00000004
+#define DDRSS_CTL_99_DATA 0x00000000
+#define DDRSS_CTL_100_DATA 0x00040005
+#define DDRSS_CTL_101_DATA 0x00000000
+#define DDRSS_CTL_102_DATA 0x00002EC0
+#define DDRSS_CTL_103_DATA 0x00002EC0
+#define DDRSS_CTL_104_DATA 0x00002EC0
+#define DDRSS_CTL_105_DATA 0x00002EC0
+#define DDRSS_CTL_106_DATA 0x00002EC0
+#define DDRSS_CTL_107_DATA 0x00000000
+#define DDRSS_CTL_108_DATA 0x0000051D
+#define DDRSS_CTL_109_DATA 0x00081CC0
+#define DDRSS_CTL_110_DATA 0x00081CC0
+#define DDRSS_CTL_111_DATA 0x00081CC0
+#define DDRSS_CTL_112_DATA 0x00081CC0
+#define DDRSS_CTL_113_DATA 0x00081CC0
+#define DDRSS_CTL_114_DATA 0x00000000
+#define DDRSS_CTL_115_DATA 0x0000E325
+#define DDRSS_CTL_116_DATA 0x00081CC0
+#define DDRSS_CTL_117_DATA 0x00081CC0
+#define DDRSS_CTL_118_DATA 0x00081CC0
+#define DDRSS_CTL_119_DATA 0x00081CC0
+#define DDRSS_CTL_120_DATA 0x00081CC0
+#define DDRSS_CTL_121_DATA 0x00000000
+#define DDRSS_CTL_122_DATA 0x0000E325
+#define DDRSS_CTL_123_DATA 0x00000000
+#define DDRSS_CTL_124_DATA 0x00000000
+#define DDRSS_CTL_125_DATA 0x00000000
+#define DDRSS_CTL_126_DATA 0x00000000
+#define DDRSS_CTL_127_DATA 0x00000000
+#define DDRSS_CTL_128_DATA 0x00000000
+#define DDRSS_CTL_129_DATA 0x00000000
+#define DDRSS_CTL_130_DATA 0x00000000
+#define DDRSS_CTL_131_DATA 0x0B030500
+#define DDRSS_CTL_132_DATA 0x00040B04
+#define DDRSS_CTL_133_DATA 0x0A090000
+#define DDRSS_CTL_134_DATA 0x0A090701
+#define DDRSS_CTL_135_DATA 0x0900000E
+#define DDRSS_CTL_136_DATA 0x0907010A
+#define DDRSS_CTL_137_DATA 0x00000E0A
+#define DDRSS_CTL_138_DATA 0x07010A09
+#define DDRSS_CTL_139_DATA 0x000E0A09
+#define DDRSS_CTL_140_DATA 0x07000401
+#define DDRSS_CTL_141_DATA 0x00000000
+#define DDRSS_CTL_142_DATA 0x00000000
+#define DDRSS_CTL_143_DATA 0x00000000
+#define DDRSS_CTL_144_DATA 0x00000000
+#define DDRSS_CTL_145_DATA 0x00000000
+#define DDRSS_CTL_146_DATA 0x00000000
+#define DDRSS_CTL_147_DATA 0x00000000
+#define DDRSS_CTL_148_DATA 0x08080000
+#define DDRSS_CTL_149_DATA 0x01000000
+#define DDRSS_CTL_150_DATA 0x800000C0
+#define DDRSS_CTL_151_DATA 0x800000C0
+#define DDRSS_CTL_152_DATA 0x800000C0
+#define DDRSS_CTL_153_DATA 0x00000000
+#define DDRSS_CTL_154_DATA 0x00001500
+#define DDRSS_CTL_155_DATA 0x00000000
+#define DDRSS_CTL_156_DATA 0x00000001
+#define DDRSS_CTL_157_DATA 0x00000002
+#define DDRSS_CTL_158_DATA 0x0000100E
+#define DDRSS_CTL_159_DATA 0x00000000
+#define DDRSS_CTL_160_DATA 0x00000000
+#define DDRSS_CTL_161_DATA 0x00000000
+#define DDRSS_CTL_162_DATA 0x00000000
+#define DDRSS_CTL_163_DATA 0x00000000
+#define DDRSS_CTL_164_DATA 0x000A0000
+#define DDRSS_CTL_165_DATA 0x000D0005
+#define DDRSS_CTL_166_DATA 0x000D0404
+#define DDRSS_CTL_167_DATA 0x00D601AB
+#define DDRSS_CTL_168_DATA 0x10100216
+#define DDRSS_CTL_169_DATA 0x01AB0216
+#define DDRSS_CTL_170_DATA 0x021600D6
+#define DDRSS_CTL_171_DATA 0x02161010
+#define DDRSS_CTL_172_DATA 0x00000000
+#define DDRSS_CTL_173_DATA 0x00000000
+#define DDRSS_CTL_174_DATA 0x00000000
+#define DDRSS_CTL_175_DATA 0x3FF40084
+#define DDRSS_CTL_176_DATA 0x33003FF4
+#define DDRSS_CTL_177_DATA 0x00003333
+#define DDRSS_CTL_178_DATA 0x56000000
+#define DDRSS_CTL_179_DATA 0x27270056
+#define DDRSS_CTL_180_DATA 0x0F0F0000
+#define DDRSS_CTL_181_DATA 0x00000000
+#define DDRSS_CTL_182_DATA 0x00840606
+#define DDRSS_CTL_183_DATA 0x3FF43FF4
+#define DDRSS_CTL_184_DATA 0x33333300
+#define DDRSS_CTL_185_DATA 0x00000000
+#define DDRSS_CTL_186_DATA 0x00565600
+#define DDRSS_CTL_187_DATA 0x00002727
+#define DDRSS_CTL_188_DATA 0x00000F0F
+#define DDRSS_CTL_189_DATA 0x06060000
+#define DDRSS_CTL_190_DATA 0x00000020
+#define DDRSS_CTL_191_DATA 0x00000000
+#define DDRSS_CTL_192_DATA 0x00000001
+#define DDRSS_CTL_193_DATA 0x00000000
+#define DDRSS_CTL_194_DATA 0x01000000
+#define DDRSS_CTL_195_DATA 0x00000001
+#define DDRSS_CTL_196_DATA 0x00000000
+#define DDRSS_CTL_197_DATA 0x00000000
+#define DDRSS_CTL_198_DATA 0x00000000
+#define DDRSS_CTL_199_DATA 0x00000000
+#define DDRSS_CTL_200_DATA 0x00000000
+#define DDRSS_CTL_201_DATA 0x00000000
+#define DDRSS_CTL_202_DATA 0x00000000
+#define DDRSS_CTL_203_DATA 0x00000000
+#define DDRSS_CTL_204_DATA 0x00000000
+#define DDRSS_CTL_205_DATA 0x00000000
+#define DDRSS_CTL_206_DATA 0x02000000
+#define DDRSS_CTL_207_DATA 0x01080101
+#define DDRSS_CTL_208_DATA 0x00000000
+#define DDRSS_CTL_209_DATA 0x00000000
+#define DDRSS_CTL_210_DATA 0x00000000
+#define DDRSS_CTL_211_DATA 0x00000000
+#define DDRSS_CTL_212_DATA 0x00000000
+#define DDRSS_CTL_213_DATA 0x00000000
+#define DDRSS_CTL_214_DATA 0x00000000
+#define DDRSS_CTL_215_DATA 0x00000000
+#define DDRSS_CTL_216_DATA 0x00000000
+#define DDRSS_CTL_217_DATA 0x00000000
+#define DDRSS_CTL_218_DATA 0x00000000
+#define DDRSS_CTL_219_DATA 0x00000000
+#define DDRSS_CTL_220_DATA 0x00000000
+#define DDRSS_CTL_221_DATA 0x00000000
+#define DDRSS_CTL_222_DATA 0x00001000
+#define DDRSS_CTL_223_DATA 0x006403E8
+#define DDRSS_CTL_224_DATA 0x00000000
+#define DDRSS_CTL_225_DATA 0x00000000
+#define DDRSS_CTL_226_DATA 0x00000000
+#define DDRSS_CTL_227_DATA 0x15110000
+#define DDRSS_CTL_228_DATA 0x00040C18
+#define DDRSS_CTL_229_DATA 0x00000000
+#define DDRSS_CTL_230_DATA 0x00000000
+#define DDRSS_CTL_231_DATA 0x00000000
+#define DDRSS_CTL_232_DATA 0x00000000
+#define DDRSS_CTL_233_DATA 0x00000000
+#define DDRSS_CTL_234_DATA 0x00000000
+#define DDRSS_CTL_235_DATA 0x00000000
+#define DDRSS_CTL_236_DATA 0x00000000
+#define DDRSS_CTL_237_DATA 0x00000000
+#define DDRSS_CTL_238_DATA 0x00000000
+#define DDRSS_CTL_239_DATA 0x00000000
+#define DDRSS_CTL_240_DATA 0x00000000
+#define DDRSS_CTL_241_DATA 0x00000000
+#define DDRSS_CTL_242_DATA 0x00030000
+#define DDRSS_CTL_243_DATA 0x00000000
+#define DDRSS_CTL_244_DATA 0x00000000
+#define DDRSS_CTL_245_DATA 0x00000000
+#define DDRSS_CTL_246_DATA 0x00000000
+#define DDRSS_CTL_247_DATA 0x00000000
+#define DDRSS_CTL_248_DATA 0x00000000
+#define DDRSS_CTL_249_DATA 0x00000000
+#define DDRSS_CTL_250_DATA 0x00000000
+#define DDRSS_CTL_251_DATA 0x00000000
+#define DDRSS_CTL_252_DATA 0x00000000
+#define DDRSS_CTL_253_DATA 0x00000000
+#define DDRSS_CTL_254_DATA 0x00000000
+#define DDRSS_CTL_255_DATA 0x00000000
+#define DDRSS_CTL_256_DATA 0x00000000
+#define DDRSS_CTL_257_DATA 0x01000200
+#define DDRSS_CTL_258_DATA 0x00320040
+#define DDRSS_CTL_259_DATA 0x00020008
+#define DDRSS_CTL_260_DATA 0x00400100
+#define DDRSS_CTL_261_DATA 0x00400855
+#define DDRSS_CTL_262_DATA 0x01000200
+#define DDRSS_CTL_263_DATA 0x08550040
+#define DDRSS_CTL_264_DATA 0x00000040
+#define DDRSS_CTL_265_DATA 0x006B0003
+#define DDRSS_CTL_266_DATA 0x0100006B
+#define DDRSS_CTL_267_DATA 0x00000000
+#define DDRSS_CTL_268_DATA 0x01010000
+#define DDRSS_CTL_269_DATA 0x00000202
+#define DDRSS_CTL_270_DATA 0x00000FFF
+#define DDRSS_CTL_271_DATA 0x1FFF1000
+#define DDRSS_CTL_272_DATA 0x01FF0000
+#define DDRSS_CTL_273_DATA 0x000101FF
+#define DDRSS_CTL_274_DATA 0x0FFF0B00
+#define DDRSS_CTL_275_DATA 0x01010001
+#define DDRSS_CTL_276_DATA 0x01010101
+#define DDRSS_CTL_277_DATA 0x01180101
+#define DDRSS_CTL_278_DATA 0x00030000
+#define DDRSS_CTL_279_DATA 0x00000000
+#define DDRSS_CTL_280_DATA 0x00000000
+#define DDRSS_CTL_281_DATA 0x00000000
+#define DDRSS_CTL_282_DATA 0x00000000
+#define DDRSS_CTL_283_DATA 0x00000000
+#define DDRSS_CTL_284_DATA 0x00000000
+#define DDRSS_CTL_285_DATA 0x00000000
+#define DDRSS_CTL_286_DATA 0x00040101
+#define DDRSS_CTL_287_DATA 0x04010100
+#define DDRSS_CTL_288_DATA 0x00000000
+#define DDRSS_CTL_289_DATA 0x00000000
+#define DDRSS_CTL_290_DATA 0x03030300
+#define DDRSS_CTL_291_DATA 0x00000001
+#define DDRSS_CTL_292_DATA 0x00000000
+#define DDRSS_CTL_293_DATA 0x00000000
+#define DDRSS_CTL_294_DATA 0x00000000
+#define DDRSS_CTL_295_DATA 0x00000000
+#define DDRSS_CTL_296_DATA 0x00000000
+#define DDRSS_CTL_297_DATA 0x00000000
+#define DDRSS_CTL_298_DATA 0x00000000
+#define DDRSS_CTL_299_DATA 0x00000000
+#define DDRSS_CTL_300_DATA 0x00000000
+#define DDRSS_CTL_301_DATA 0x00000000
+#define DDRSS_CTL_302_DATA 0x00000000
+#define DDRSS_CTL_303_DATA 0x00000000
+#define DDRSS_CTL_304_DATA 0x00000000
+#define DDRSS_CTL_305_DATA 0x00000000
+#define DDRSS_CTL_306_DATA 0x00000000
+#define DDRSS_CTL_307_DATA 0x00000000
+#define DDRSS_CTL_308_DATA 0x00000000
+#define DDRSS_CTL_309_DATA 0x00000000
+#define DDRSS_CTL_310_DATA 0x00000000
+#define DDRSS_CTL_311_DATA 0x00000000
+#define DDRSS_CTL_312_DATA 0x00000000
+#define DDRSS_CTL_313_DATA 0x01000000
+#define DDRSS_CTL_314_DATA 0x00020201
+#define DDRSS_CTL_315_DATA 0x01000101
+#define DDRSS_CTL_316_DATA 0x01010001
+#define DDRSS_CTL_317_DATA 0x00010101
+#define DDRSS_CTL_318_DATA 0x050A0A03
+#define DDRSS_CTL_319_DATA 0x10081F1F
+#define DDRSS_CTL_320_DATA 0x00090310
+#define DDRSS_CTL_321_DATA 0x0B0C030F
+#define DDRSS_CTL_322_DATA 0x0B0C0306
+#define DDRSS_CTL_323_DATA 0x0C090006
+#define DDRSS_CTL_324_DATA 0x0100000C
+#define DDRSS_CTL_325_DATA 0x08040801
+#define DDRSS_CTL_326_DATA 0x00000004
+#define DDRSS_CTL_327_DATA 0x00000000
+#define DDRSS_CTL_328_DATA 0x00010000
+#define DDRSS_CTL_329_DATA 0x00280D00
+#define DDRSS_CTL_330_DATA 0x00000001
+#define DDRSS_CTL_331_DATA 0x00030001
+#define DDRSS_CTL_332_DATA 0x00000000
+#define DDRSS_CTL_333_DATA 0x00000000
+#define DDRSS_CTL_334_DATA 0x00000000
+#define DDRSS_CTL_335_DATA 0x00000000
+#define DDRSS_CTL_336_DATA 0x00000000
+#define DDRSS_CTL_337_DATA 0x00000000
+#define DDRSS_CTL_338_DATA 0x00000000
+#define DDRSS_CTL_339_DATA 0x00000000
+#define DDRSS_CTL_340_DATA 0x01000000
+#define DDRSS_CTL_341_DATA 0x00000001
+#define DDRSS_CTL_342_DATA 0x00010100
+#define DDRSS_CTL_343_DATA 0x03030000
+#define DDRSS_CTL_344_DATA 0x00000000
+#define DDRSS_CTL_345_DATA 0x00000000
+#define DDRSS_CTL_346_DATA 0x00000000
+#define DDRSS_CTL_347_DATA 0x00000000
+#define DDRSS_CTL_348_DATA 0x00000000
+#define DDRSS_CTL_349_DATA 0x00000000
+#define DDRSS_CTL_350_DATA 0x00000000
+#define DDRSS_CTL_351_DATA 0x00000000
+#define DDRSS_CTL_352_DATA 0x00000000
+#define DDRSS_CTL_353_DATA 0x00000000
+#define DDRSS_CTL_354_DATA 0x00000000
+#define DDRSS_CTL_355_DATA 0x00000000
+#define DDRSS_CTL_356_DATA 0x00000000
+#define DDRSS_CTL_357_DATA 0x00000000
+#define DDRSS_CTL_358_DATA 0x00000000
+#define DDRSS_CTL_359_DATA 0x00000000
+#define DDRSS_CTL_360_DATA 0x000556AA
+#define DDRSS_CTL_361_DATA 0x000AAAAA
+#define DDRSS_CTL_362_DATA 0x000AA955
+#define DDRSS_CTL_363_DATA 0x00055555
+#define DDRSS_CTL_364_DATA 0x000B3133
+#define DDRSS_CTL_365_DATA 0x0004CD33
+#define DDRSS_CTL_366_DATA 0x0004CECC
+#define DDRSS_CTL_367_DATA 0x000B32CC
+#define DDRSS_CTL_368_DATA 0x00010300
+#define DDRSS_CTL_369_DATA 0x03000100
+#define DDRSS_CTL_370_DATA 0x00000000
+#define DDRSS_CTL_371_DATA 0x00000000
+#define DDRSS_CTL_372_DATA 0x00000000
+#define DDRSS_CTL_373_DATA 0x00000000
+#define DDRSS_CTL_374_DATA 0x00000000
+#define DDRSS_CTL_375_DATA 0x00000000
+#define DDRSS_CTL_376_DATA 0x00000000
+#define DDRSS_CTL_377_DATA 0x00010000
+#define DDRSS_CTL_378_DATA 0x00000404
+#define DDRSS_CTL_379_DATA 0x00000000
+#define DDRSS_CTL_380_DATA 0x00000000
+#define DDRSS_CTL_381_DATA 0x00000000
+#define DDRSS_CTL_382_DATA 0x00000000
+#define DDRSS_CTL_383_DATA 0x00000000
+#define DDRSS_CTL_384_DATA 0x00000000
+#define DDRSS_CTL_385_DATA 0x00000000
+#define DDRSS_CTL_386_DATA 0x00000000
+#define DDRSS_CTL_387_DATA 0x3A3A1B00
+#define DDRSS_CTL_388_DATA 0x000A0000
+#define DDRSS_CTL_389_DATA 0x00000176
+#define DDRSS_CTL_390_DATA 0x00000200
+#define DDRSS_CTL_391_DATA 0x00000200
+#define DDRSS_CTL_392_DATA 0x00000200
+#define DDRSS_CTL_393_DATA 0x00000200
+#define DDRSS_CTL_394_DATA 0x00000462
+#define DDRSS_CTL_395_DATA 0x00000E9C
+#define DDRSS_CTL_396_DATA 0x00000204
+#define DDRSS_CTL_397_DATA 0x000040E6
+#define DDRSS_CTL_398_DATA 0x00000200
+#define DDRSS_CTL_399_DATA 0x00000200
+#define DDRSS_CTL_400_DATA 0x00000200
+#define DDRSS_CTL_401_DATA 0x00000200
+#define DDRSS_CTL_402_DATA 0x0000C2B2
+#define DDRSS_CTL_403_DATA 0x000288FC
+#define DDRSS_CTL_404_DATA 0x00000E15
+#define DDRSS_CTL_405_DATA 0x000040E6
+#define DDRSS_CTL_406_DATA 0x00000200
+#define DDRSS_CTL_407_DATA 0x00000200
+#define DDRSS_CTL_408_DATA 0x00000200
+#define DDRSS_CTL_409_DATA 0x00000200
+#define DDRSS_CTL_410_DATA 0x0000C2B2
+#define DDRSS_CTL_411_DATA 0x000288FC
+#define DDRSS_CTL_412_DATA 0x02020E15
+#define DDRSS_CTL_413_DATA 0x03030202
+#define DDRSS_CTL_414_DATA 0x00000022
+#define DDRSS_CTL_415_DATA 0x00000000
+#define DDRSS_CTL_416_DATA 0x00000000
+#define DDRSS_CTL_417_DATA 0x00001403
+#define DDRSS_CTL_418_DATA 0x000007D0
+#define DDRSS_CTL_419_DATA 0x00000000
+#define DDRSS_CTL_420_DATA 0x00000000
+#define DDRSS_CTL_421_DATA 0x00030000
+#define DDRSS_CTL_422_DATA 0x0006001E
+#define DDRSS_CTL_423_DATA 0x001B0033
+#define DDRSS_CTL_424_DATA 0x001B0033
+#define DDRSS_CTL_425_DATA 0x00000000
+#define DDRSS_CTL_426_DATA 0x00000000
+#define DDRSS_CTL_427_DATA 0x02000000
+#define DDRSS_CTL_428_DATA 0x01000404
+#define DDRSS_CTL_429_DATA 0x0B1E0B1E
+#define DDRSS_CTL_430_DATA 0x00000105
+#define DDRSS_CTL_431_DATA 0x00010101
+#define DDRSS_CTL_432_DATA 0x00010101
+#define DDRSS_CTL_433_DATA 0x00010001
+#define DDRSS_CTL_434_DATA 0x00000101
+#define DDRSS_CTL_435_DATA 0x02000201
+#define DDRSS_CTL_436_DATA 0x02010000
+#define DDRSS_CTL_437_DATA 0x00000200
+#define DDRSS_CTL_438_DATA 0x28060000
+#define DDRSS_CTL_439_DATA 0x00000128
+#define DDRSS_CTL_440_DATA 0xFFFFFFFF
+#define DDRSS_CTL_441_DATA 0xFFFFFFFF
+#define DDRSS_CTL_442_DATA 0x00000000
+#define DDRSS_CTL_443_DATA 0x00000000
+#define DDRSS_CTL_444_DATA 0x00000000
+#define DDRSS_CTL_445_DATA 0x00000000
+#define DDRSS_CTL_446_DATA 0x00000000
+#define DDRSS_CTL_447_DATA 0x00000000
+#define DDRSS_CTL_448_DATA 0x00000000
+#define DDRSS_CTL_449_DATA 0x00000000
+#define DDRSS_CTL_450_DATA 0x00000000
+#define DDRSS_CTL_451_DATA 0x00000000
+#define DDRSS_CTL_452_DATA 0x00000000
+#define DDRSS_CTL_453_DATA 0x00000000
+#define DDRSS_CTL_454_DATA 0x00000000
+#define DDRSS_CTL_455_DATA 0x00000000
+#define DDRSS_CTL_456_DATA 0x00000000
+#define DDRSS_CTL_457_DATA 0x00000000
+#define DDRSS_CTL_458_DATA 0x00000000
+
+#define DDRSS_PI_00_DATA 0x00000B00
+#define DDRSS_PI_01_DATA 0x00000000
+#define DDRSS_PI_02_DATA 0x00000000
+#define DDRSS_PI_03_DATA 0x00000000
+#define DDRSS_PI_04_DATA 0x00000000
+#define DDRSS_PI_05_DATA 0x00000101
+#define DDRSS_PI_06_DATA 0x00640000
+#define DDRSS_PI_07_DATA 0x00000001
+#define DDRSS_PI_08_DATA 0x00000000
+#define DDRSS_PI_09_DATA 0x00000000
+#define DDRSS_PI_10_DATA 0x00000000
+#define DDRSS_PI_11_DATA 0x00000000
+#define DDRSS_PI_12_DATA 0x00000007
+#define DDRSS_PI_13_DATA 0x00010002
+#define DDRSS_PI_14_DATA 0x0800000F
+#define DDRSS_PI_15_DATA 0x00000103
+#define DDRSS_PI_16_DATA 0x00000005
+#define DDRSS_PI_17_DATA 0x00000000
+#define DDRSS_PI_18_DATA 0x00000000
+#define DDRSS_PI_19_DATA 0x00000000
+#define DDRSS_PI_20_DATA 0x00000000
+#define DDRSS_PI_21_DATA 0x00000000
+#define DDRSS_PI_22_DATA 0x00000000
+#define DDRSS_PI_23_DATA 0x00000000
+#define DDRSS_PI_24_DATA 0x00000000
+#define DDRSS_PI_25_DATA 0x00000000
+#define DDRSS_PI_26_DATA 0x00010100
+#define DDRSS_PI_27_DATA 0x00280A00
+#define DDRSS_PI_28_DATA 0x00000000
+#define DDRSS_PI_29_DATA 0x0F000000
+#define DDRSS_PI_30_DATA 0x00003200
+#define DDRSS_PI_31_DATA 0x00000000
+#define DDRSS_PI_32_DATA 0x00000000
+#define DDRSS_PI_33_DATA 0x01010102
+#define DDRSS_PI_34_DATA 0x00000000
+#define DDRSS_PI_35_DATA 0x000000AA
+#define DDRSS_PI_36_DATA 0x00000055
+#define DDRSS_PI_37_DATA 0x000000B5
+#define DDRSS_PI_38_DATA 0x0000004A
+#define DDRSS_PI_39_DATA 0x00000056
+#define DDRSS_PI_40_DATA 0x000000A9
+#define DDRSS_PI_41_DATA 0x000000A9
+#define DDRSS_PI_42_DATA 0x000000B5
+#define DDRSS_PI_43_DATA 0x00000000
+#define DDRSS_PI_44_DATA 0x00000000
+#define DDRSS_PI_45_DATA 0x000F0F00
+#define DDRSS_PI_46_DATA 0x0000001B
+#define DDRSS_PI_47_DATA 0x000007D0
+#define DDRSS_PI_48_DATA 0x00000300
+#define DDRSS_PI_49_DATA 0x00000000
+#define DDRSS_PI_50_DATA 0x00000000
+#define DDRSS_PI_51_DATA 0x01000000
+#define DDRSS_PI_52_DATA 0x00010101
+#define DDRSS_PI_53_DATA 0x00000000
+#define DDRSS_PI_54_DATA 0x00030000
+#define DDRSS_PI_55_DATA 0x0F000000
+#define DDRSS_PI_56_DATA 0x00000017
+#define DDRSS_PI_57_DATA 0x00000000
+#define DDRSS_PI_58_DATA 0x00000000
+#define DDRSS_PI_59_DATA 0x00000000
+#define DDRSS_PI_60_DATA 0x0A0A140A
+#define DDRSS_PI_61_DATA 0x10020101
+#define DDRSS_PI_62_DATA 0x00020805
+#define DDRSS_PI_63_DATA 0x01000404
+#define DDRSS_PI_64_DATA 0x00000000
+#define DDRSS_PI_65_DATA 0x00000000
+#define DDRSS_PI_66_DATA 0x00000100
+#define DDRSS_PI_67_DATA 0x0001010F
+#define DDRSS_PI_68_DATA 0x00340000
+#define DDRSS_PI_69_DATA 0x00000000
+#define DDRSS_PI_70_DATA 0x00000000
+#define DDRSS_PI_71_DATA 0x0000FFFF
+#define DDRSS_PI_72_DATA 0x00000000
+#define DDRSS_PI_73_DATA 0x00080100
+#define DDRSS_PI_74_DATA 0x02000200
+#define DDRSS_PI_75_DATA 0x01000100
+#define DDRSS_PI_76_DATA 0x01000000
+#define DDRSS_PI_77_DATA 0x02000200
+#define DDRSS_PI_78_DATA 0x00000200
+#define DDRSS_PI_79_DATA 0x00000000
+#define DDRSS_PI_80_DATA 0x00000000
+#define DDRSS_PI_81_DATA 0x00000000
+#define DDRSS_PI_82_DATA 0x00000000
+#define DDRSS_PI_83_DATA 0x00000000
+#define DDRSS_PI_84_DATA 0x00000000
+#define DDRSS_PI_85_DATA 0x00000000
+#define DDRSS_PI_86_DATA 0x00000000
+#define DDRSS_PI_87_DATA 0x00000000
+#define DDRSS_PI_88_DATA 0x00000000
+#define DDRSS_PI_89_DATA 0x00000000
+#define DDRSS_PI_90_DATA 0x00000000
+#define DDRSS_PI_91_DATA 0x00000400
+#define DDRSS_PI_92_DATA 0x02010000
+#define DDRSS_PI_93_DATA 0x00080003
+#define DDRSS_PI_94_DATA 0x00080000
+#define DDRSS_PI_95_DATA 0x00000001
+#define DDRSS_PI_96_DATA 0x00000000
+#define DDRSS_PI_97_DATA 0x0000AA00
+#define DDRSS_PI_98_DATA 0x00000000
+#define DDRSS_PI_99_DATA 0x00000000
+#define DDRSS_PI_100_DATA 0x00010000
+#define DDRSS_PI_101_DATA 0x00000000
+#define DDRSS_PI_102_DATA 0x00000000
+#define DDRSS_PI_103_DATA 0x00000000
+#define DDRSS_PI_104_DATA 0x00000000
+#define DDRSS_PI_105_DATA 0x00000000
+#define DDRSS_PI_106_DATA 0x00000000
+#define DDRSS_PI_107_DATA 0x00000000
+#define DDRSS_PI_108_DATA 0x00000000
+#define DDRSS_PI_109_DATA 0x00000000
+#define DDRSS_PI_110_DATA 0x00000000
+#define DDRSS_PI_111_DATA 0x00000000
+#define DDRSS_PI_112_DATA 0x00000000
+#define DDRSS_PI_113_DATA 0x00000000
+#define DDRSS_PI_114_DATA 0x00000000
+#define DDRSS_PI_115_DATA 0x00000000
+#define DDRSS_PI_116_DATA 0x00000000
+#define DDRSS_PI_117_DATA 0x00000000
+#define DDRSS_PI_118_DATA 0x00000000
+#define DDRSS_PI_119_DATA 0x00000000
+#define DDRSS_PI_120_DATA 0x00000000
+#define DDRSS_PI_121_DATA 0x00000000
+#define DDRSS_PI_122_DATA 0x00000000
+#define DDRSS_PI_123_DATA 0x00000000
+#define DDRSS_PI_124_DATA 0x00000000
+#define DDRSS_PI_125_DATA 0x00000008
+#define DDRSS_PI_126_DATA 0x00000000
+#define DDRSS_PI_127_DATA 0x00000000
+#define DDRSS_PI_128_DATA 0x00000000
+#define DDRSS_PI_129_DATA 0x00000000
+#define DDRSS_PI_130_DATA 0x00000000
+#define DDRSS_PI_131_DATA 0x00000000
+#define DDRSS_PI_132_DATA 0x00000000
+#define DDRSS_PI_133_DATA 0x00000000
+#define DDRSS_PI_134_DATA 0x00000002
+#define DDRSS_PI_135_DATA 0x00000000
+#define DDRSS_PI_136_DATA 0x00000000
+#define DDRSS_PI_137_DATA 0x0000000A
+#define DDRSS_PI_138_DATA 0x00000019
+#define DDRSS_PI_139_DATA 0x00000100
+#define DDRSS_PI_140_DATA 0x00000000
+#define DDRSS_PI_141_DATA 0x00000000
+#define DDRSS_PI_142_DATA 0x00000000
+#define DDRSS_PI_143_DATA 0x00000000
+#define DDRSS_PI_144_DATA 0x01000000
+#define DDRSS_PI_145_DATA 0x00010003
+#define DDRSS_PI_146_DATA 0x02000101
+#define DDRSS_PI_147_DATA 0x01030001
+#define DDRSS_PI_148_DATA 0x00010400
+#define DDRSS_PI_149_DATA 0x06000105
+#define DDRSS_PI_150_DATA 0x01070001
+#define DDRSS_PI_151_DATA 0x00000000
+#define DDRSS_PI_152_DATA 0x00000000
+#define DDRSS_PI_153_DATA 0x00000000
+#define DDRSS_PI_154_DATA 0x00010001
+#define DDRSS_PI_155_DATA 0x00000000
+#define DDRSS_PI_156_DATA 0x00000000
+#define DDRSS_PI_157_DATA 0x00000000
+#define DDRSS_PI_158_DATA 0x00000000
+#define DDRSS_PI_159_DATA 0x00000401
+#define DDRSS_PI_160_DATA 0x00000000
+#define DDRSS_PI_161_DATA 0x00010000
+#define DDRSS_PI_162_DATA 0x00000000
+#define DDRSS_PI_163_DATA 0x2B2B0100
+#define DDRSS_PI_164_DATA 0x00000034
+#define DDRSS_PI_165_DATA 0x00000064
+#define DDRSS_PI_166_DATA 0x00020064
+#define DDRSS_PI_167_DATA 0x02000200
+#define DDRSS_PI_168_DATA 0x48120C04
+#define DDRSS_PI_169_DATA 0x000E4812
+#define DDRSS_PI_170_DATA 0x000000BB
+#define DDRSS_PI_171_DATA 0x00000256
+#define DDRSS_PI_172_DATA 0x00002073
+#define DDRSS_PI_173_DATA 0x00000256
+#define DDRSS_PI_174_DATA 0x04002073
+#define DDRSS_PI_175_DATA 0x01010404
+#define DDRSS_PI_176_DATA 0x00001501
+#define DDRSS_PI_177_DATA 0x00150015
+#define DDRSS_PI_178_DATA 0x01000100
+#define DDRSS_PI_179_DATA 0x00000100
+#define DDRSS_PI_180_DATA 0x00000000
+#define DDRSS_PI_181_DATA 0x01010101
+#define DDRSS_PI_182_DATA 0x00000101
+#define DDRSS_PI_183_DATA 0x00000000
+#define DDRSS_PI_184_DATA 0x00000000
+#define DDRSS_PI_185_DATA 0x15040000
+#define DDRSS_PI_186_DATA 0x0E0E0215
+#define DDRSS_PI_187_DATA 0x00040402
+#define DDRSS_PI_188_DATA 0x000C8034
+#define DDRSS_PI_189_DATA 0x00218049
+#define DDRSS_PI_190_DATA 0x00218049
+#define DDRSS_PI_191_DATA 0x01010101
+#define DDRSS_PI_192_DATA 0x0004000D
+#define DDRSS_PI_193_DATA 0x00040216
+#define DDRSS_PI_194_DATA 0x01000216
+#define DDRSS_PI_195_DATA 0x000E000E
+#define DDRSS_PI_196_DATA 0x02170100
+#define DDRSS_PI_197_DATA 0x01000217
+#define DDRSS_PI_198_DATA 0x02170217
+#define DDRSS_PI_199_DATA 0x32103200
+#define DDRSS_PI_200_DATA 0x01013210
+#define DDRSS_PI_201_DATA 0x0A070601
+#define DDRSS_PI_202_DATA 0x1F130A0D
+#define DDRSS_PI_203_DATA 0x1F130A14
+#define DDRSS_PI_204_DATA 0x0000C014
+#define DDRSS_PI_205_DATA 0x00C01000
+#define DDRSS_PI_206_DATA 0x00C01000
+#define DDRSS_PI_207_DATA 0x00021000
+#define DDRSS_PI_208_DATA 0x0024000D
+#define DDRSS_PI_209_DATA 0x00240216
+#define DDRSS_PI_210_DATA 0x00110216
+#define DDRSS_PI_211_DATA 0x32000056
+#define DDRSS_PI_212_DATA 0x00000301
+#define DDRSS_PI_213_DATA 0x005B003A
+#define DDRSS_PI_214_DATA 0x03013212
+#define DDRSS_PI_215_DATA 0x00003A00
+#define DDRSS_PI_216_DATA 0x3212005B
+#define DDRSS_PI_217_DATA 0x09000301
+#define DDRSS_PI_218_DATA 0x04010504
+#define DDRSS_PI_219_DATA 0x0400062B
+#define DDRSS_PI_220_DATA 0x0A032001
+#define DDRSS_PI_221_DATA 0x2C31110A
+#define DDRSS_PI_222_DATA 0x00002D1C
+#define DDRSS_PI_223_DATA 0x6001071C
+#define DDRSS_PI_224_DATA 0x1E202008
+#define DDRSS_PI_225_DATA 0x2C311116
+#define DDRSS_PI_226_DATA 0x00002D1C
+#define DDRSS_PI_227_DATA 0x6001071C
+#define DDRSS_PI_228_DATA 0x1E202008
+#define DDRSS_PI_229_DATA 0x00017616
+#define DDRSS_PI_230_DATA 0x00000E9C
+#define DDRSS_PI_231_DATA 0x000040E6
+#define DDRSS_PI_232_DATA 0x000288FC
+#define DDRSS_PI_233_DATA 0x000040E6
+#define DDRSS_PI_234_DATA 0x000288FC
+#define DDRSS_PI_235_DATA 0x0266000F
+#define DDRSS_PI_236_DATA 0x03030266
+#define DDRSS_PI_237_DATA 0x00271003
+#define DDRSS_PI_238_DATA 0x000186A0
+#define DDRSS_PI_239_DATA 0x00000005
+#define DDRSS_PI_240_DATA 0x00000064
+#define DDRSS_PI_241_DATA 0x0000000F
+#define DDRSS_PI_242_DATA 0x000681C8
+#define DDRSS_PI_243_DATA 0x000186A0
+#define DDRSS_PI_244_DATA 0x00000005
+#define DDRSS_PI_245_DATA 0x000010A9
+#define DDRSS_PI_246_DATA 0x00000266
+#define DDRSS_PI_247_DATA 0x000681C8
+#define DDRSS_PI_248_DATA 0x000186A0
+#define DDRSS_PI_249_DATA 0x00000005
+#define DDRSS_PI_250_DATA 0x000010A9
+#define DDRSS_PI_251_DATA 0x01000266
+#define DDRSS_PI_252_DATA 0x00320040
+#define DDRSS_PI_253_DATA 0x00010008
+#define DDRSS_PI_254_DATA 0x08550040
+#define DDRSS_PI_255_DATA 0x00010040
+#define DDRSS_PI_256_DATA 0x08550040
+#define DDRSS_PI_257_DATA 0x00000340
+#define DDRSS_PI_258_DATA 0x006B006B
+#define DDRSS_PI_259_DATA 0x00040404
+#define DDRSS_PI_260_DATA 0x00000055
+#define DDRSS_PI_261_DATA 0x55003C5A
+#define DDRSS_PI_262_DATA 0x5A000000
+#define DDRSS_PI_263_DATA 0x0055003C
+#define DDRSS_PI_264_DATA 0x3C5A0000
+#define DDRSS_PI_265_DATA 0x00005500
+#define DDRSS_PI_266_DATA 0x0C3C5A00
+#define DDRSS_PI_267_DATA 0x080F0E0D
+#define DDRSS_PI_268_DATA 0x000B0A09
+#define DDRSS_PI_269_DATA 0x00030201
+#define DDRSS_PI_270_DATA 0x01000000
+#define DDRSS_PI_271_DATA 0x04020201
+#define DDRSS_PI_272_DATA 0x00080804
+#define DDRSS_PI_273_DATA 0x00000000
+#define DDRSS_PI_274_DATA 0x00000000
+#define DDRSS_PI_275_DATA 0x00330084
+#define DDRSS_PI_276_DATA 0x00160000
+#define DDRSS_PI_277_DATA 0x56333FF4
+#define DDRSS_PI_278_DATA 0x00160F27
+#define DDRSS_PI_279_DATA 0x56333FF4
+#define DDRSS_PI_280_DATA 0x00160F27
+#define DDRSS_PI_281_DATA 0x00330084
+#define DDRSS_PI_282_DATA 0x00160000
+#define DDRSS_PI_283_DATA 0x56333FF4
+#define DDRSS_PI_284_DATA 0x00160F27
+#define DDRSS_PI_285_DATA 0x56333FF4
+#define DDRSS_PI_286_DATA 0x00160F27
+#define DDRSS_PI_287_DATA 0x00330084
+#define DDRSS_PI_288_DATA 0x00160000
+#define DDRSS_PI_289_DATA 0x56333FF4
+#define DDRSS_PI_290_DATA 0x00160F27
+#define DDRSS_PI_291_DATA 0x56333FF4
+#define DDRSS_PI_292_DATA 0x00160F27
+#define DDRSS_PI_293_DATA 0x00330084
+#define DDRSS_PI_294_DATA 0x00160000
+#define DDRSS_PI_295_DATA 0x56333FF4
+#define DDRSS_PI_296_DATA 0x00160F27
+#define DDRSS_PI_297_DATA 0x56333FF4
+#define DDRSS_PI_298_DATA 0x00160F27
+#define DDRSS_PI_299_DATA 0x00000000
+
+#define DDRSS_PHY_00_DATA 0x000004F0
+#define DDRSS_PHY_01_DATA 0x00000000
+#define DDRSS_PHY_02_DATA 0x00030200
+#define DDRSS_PHY_03_DATA 0x00000000
+#define DDRSS_PHY_04_DATA 0x00000000
+#define DDRSS_PHY_05_DATA 0x01030000
+#define DDRSS_PHY_06_DATA 0x00010000
+#define DDRSS_PHY_07_DATA 0x01030004
+#define DDRSS_PHY_08_DATA 0x01000000
+#define DDRSS_PHY_09_DATA 0x00000000
+#define DDRSS_PHY_10_DATA 0x00000000
+#define DDRSS_PHY_11_DATA 0x01000001
+#define DDRSS_PHY_12_DATA 0x00000100
+#define DDRSS_PHY_13_DATA 0x000800C0
+#define DDRSS_PHY_14_DATA 0x060100CC
+#define DDRSS_PHY_15_DATA 0x00030066
+#define DDRSS_PHY_16_DATA 0x00000000
+#define DDRSS_PHY_17_DATA 0x00000301
+#define DDRSS_PHY_18_DATA 0x0000AAAA
+#define DDRSS_PHY_19_DATA 0x00005555
+#define DDRSS_PHY_20_DATA 0x0000B5B5
+#define DDRSS_PHY_21_DATA 0x00004A4A
+#define DDRSS_PHY_22_DATA 0x00005656
+#define DDRSS_PHY_23_DATA 0x0000A9A9
+#define DDRSS_PHY_24_DATA 0x0000A9A9
+#define DDRSS_PHY_25_DATA 0x0000B5B5
+#define DDRSS_PHY_26_DATA 0x00000000
+#define DDRSS_PHY_27_DATA 0x00000000
+#define DDRSS_PHY_28_DATA 0x2A000000
+#define DDRSS_PHY_29_DATA 0x00000808
+#define DDRSS_PHY_30_DATA 0x0F000000
+#define DDRSS_PHY_31_DATA 0x00000F0F
+#define DDRSS_PHY_32_DATA 0x10200000
+#define DDRSS_PHY_33_DATA 0x0C002007
+#define DDRSS_PHY_34_DATA 0x00000000
+#define DDRSS_PHY_35_DATA 0x00000000
+#define DDRSS_PHY_36_DATA 0x55555555
+#define DDRSS_PHY_37_DATA 0xAAAAAAAA
+#define DDRSS_PHY_38_DATA 0x55555555
+#define DDRSS_PHY_39_DATA 0xAAAAAAAA
+#define DDRSS_PHY_40_DATA 0x00005555
+#define DDRSS_PHY_41_DATA 0x01000100
+#define DDRSS_PHY_42_DATA 0x00800180
+#define DDRSS_PHY_43_DATA 0x00000001
+#define DDRSS_PHY_44_DATA 0x00000000
+#define DDRSS_PHY_45_DATA 0x00000000
+#define DDRSS_PHY_46_DATA 0x00000000
+#define DDRSS_PHY_47_DATA 0x00000000
+#define DDRSS_PHY_48_DATA 0x00000000
+#define DDRSS_PHY_49_DATA 0x00000000
+#define DDRSS_PHY_50_DATA 0x00000000
+#define DDRSS_PHY_51_DATA 0x00000000
+#define DDRSS_PHY_52_DATA 0x00000000
+#define DDRSS_PHY_53_DATA 0x00000000
+#define DDRSS_PHY_54_DATA 0x00000000
+#define DDRSS_PHY_55_DATA 0x00000000
+#define DDRSS_PHY_56_DATA 0x00000000
+#define DDRSS_PHY_57_DATA 0x00000000
+#define DDRSS_PHY_58_DATA 0x00000000
+#define DDRSS_PHY_59_DATA 0x00000000
+#define DDRSS_PHY_60_DATA 0x00000000
+#define DDRSS_PHY_61_DATA 0x00000000
+#define DDRSS_PHY_62_DATA 0x00000000
+#define DDRSS_PHY_63_DATA 0x00000000
+#define DDRSS_PHY_64_DATA 0x00000000
+#define DDRSS_PHY_65_DATA 0x00000000
+#define DDRSS_PHY_66_DATA 0x00000104
+#define DDRSS_PHY_67_DATA 0x00000120
+#define DDRSS_PHY_68_DATA 0x00000000
+#define DDRSS_PHY_69_DATA 0x00000000
+#define DDRSS_PHY_70_DATA 0x00000000
+#define DDRSS_PHY_71_DATA 0x00000000
+#define DDRSS_PHY_72_DATA 0x00000000
+#define DDRSS_PHY_73_DATA 0x00000000
+#define DDRSS_PHY_74_DATA 0x00000000
+#define DDRSS_PHY_75_DATA 0x00000001
+#define DDRSS_PHY_76_DATA 0x07FF0000
+#define DDRSS_PHY_77_DATA 0x0080081F
+#define DDRSS_PHY_78_DATA 0x00081020
+#define DDRSS_PHY_79_DATA 0x04010000
+#define DDRSS_PHY_80_DATA 0x00000000
+#define DDRSS_PHY_81_DATA 0x00000000
+#define DDRSS_PHY_82_DATA 0x00000000
+#define DDRSS_PHY_83_DATA 0x00000100
+#define DDRSS_PHY_84_DATA 0x01CC0C01
+#define DDRSS_PHY_85_DATA 0x1003CC0C
+#define DDRSS_PHY_86_DATA 0x20000140
+#define DDRSS_PHY_87_DATA 0x07FF0200
+#define DDRSS_PHY_88_DATA 0x0000DD01
+#define DDRSS_PHY_89_DATA 0x10100303
+#define DDRSS_PHY_90_DATA 0x10101010
+#define DDRSS_PHY_91_DATA 0x10101010
+#define DDRSS_PHY_92_DATA 0x00021010
+#define DDRSS_PHY_93_DATA 0x00100010
+#define DDRSS_PHY_94_DATA 0x00100010
+#define DDRSS_PHY_95_DATA 0x00100010
+#define DDRSS_PHY_96_DATA 0x00100010
+#define DDRSS_PHY_97_DATA 0x00050010
+#define DDRSS_PHY_98_DATA 0x51517041
+#define DDRSS_PHY_99_DATA 0x31C06001
+#define DDRSS_PHY_100_DATA 0x07AB0340
+#define DDRSS_PHY_101_DATA 0x00C0C001
+#define DDRSS_PHY_102_DATA 0x0E0D0001
+#define DDRSS_PHY_103_DATA 0x10001000
+#define DDRSS_PHY_104_DATA 0x0C083E42
+#define DDRSS_PHY_105_DATA 0x0F0C3701
+#define DDRSS_PHY_106_DATA 0x01000140
+#define DDRSS_PHY_107_DATA 0x0C000420
+#define DDRSS_PHY_108_DATA 0x00000322
+#define DDRSS_PHY_109_DATA 0x0A0000D0
+#define DDRSS_PHY_110_DATA 0x00030200
+#define DDRSS_PHY_111_DATA 0x02800000
+#define DDRSS_PHY_112_DATA 0x80800000
+#define DDRSS_PHY_113_DATA 0x000E2010
+#define DDRSS_PHY_114_DATA 0x76543210
+#define DDRSS_PHY_115_DATA 0x00000008
+#define DDRSS_PHY_116_DATA 0x02800280
+#define DDRSS_PHY_117_DATA 0x02800280
+#define DDRSS_PHY_118_DATA 0x02800280
+#define DDRSS_PHY_119_DATA 0x02800280
+#define DDRSS_PHY_120_DATA 0x00000280
+#define DDRSS_PHY_121_DATA 0x0000A000
+#define DDRSS_PHY_122_DATA 0x00A000A0
+#define DDRSS_PHY_123_DATA 0x00A000A0
+#define DDRSS_PHY_124_DATA 0x00A000A0
+#define DDRSS_PHY_125_DATA 0x00A000A0
+#define DDRSS_PHY_126_DATA 0x00A000A0
+#define DDRSS_PHY_127_DATA 0x00A000A0
+#define DDRSS_PHY_128_DATA 0x00A000A0
+#define DDRSS_PHY_129_DATA 0x00A000A0
+#define DDRSS_PHY_130_DATA 0x01C200A0
+#define DDRSS_PHY_131_DATA 0x01A00005
+#define DDRSS_PHY_132_DATA 0x00000000
+#define DDRSS_PHY_133_DATA 0x00000000
+#define DDRSS_PHY_134_DATA 0x00080200
+#define DDRSS_PHY_135_DATA 0x00000000
+#define DDRSS_PHY_136_DATA 0x20202000
+#define DDRSS_PHY_137_DATA 0x20202020
+#define DDRSS_PHY_138_DATA 0xF0F02020
+#define DDRSS_PHY_139_DATA 0x00000000
+#define DDRSS_PHY_140_DATA 0x00000000
+#define DDRSS_PHY_141_DATA 0x00000000
+#define DDRSS_PHY_142_DATA 0x00000000
+#define DDRSS_PHY_143_DATA 0x00000000
+#define DDRSS_PHY_144_DATA 0x00000000
+#define DDRSS_PHY_145_DATA 0x00000000
+#define DDRSS_PHY_146_DATA 0x00000000
+#define DDRSS_PHY_147_DATA 0x00000000
+#define DDRSS_PHY_148_DATA 0x00000000
+#define DDRSS_PHY_149_DATA 0x00000000
+#define DDRSS_PHY_150_DATA 0x00000000
+#define DDRSS_PHY_151_DATA 0x00000000
+#define DDRSS_PHY_152_DATA 0x00000000
+#define DDRSS_PHY_153_DATA 0x00000000
+#define DDRSS_PHY_154_DATA 0x00000000
+#define DDRSS_PHY_155_DATA 0x00000000
+#define DDRSS_PHY_156_DATA 0x00000000
+#define DDRSS_PHY_157_DATA 0x00000000
+#define DDRSS_PHY_158_DATA 0x00000000
+#define DDRSS_PHY_159_DATA 0x00000000
+#define DDRSS_PHY_160_DATA 0x00000000
+#define DDRSS_PHY_161_DATA 0x00000000
+#define DDRSS_PHY_162_DATA 0x00000000
+#define DDRSS_PHY_163_DATA 0x00000000
+#define DDRSS_PHY_164_DATA 0x00000000
+#define DDRSS_PHY_165_DATA 0x00000000
+#define DDRSS_PHY_166_DATA 0x00000000
+#define DDRSS_PHY_167_DATA 0x00000000
+#define DDRSS_PHY_168_DATA 0x00000000
+#define DDRSS_PHY_169_DATA 0x00000000
+#define DDRSS_PHY_170_DATA 0x00000000
+#define DDRSS_PHY_171_DATA 0x00000000
+#define DDRSS_PHY_172_DATA 0x00000000
+#define DDRSS_PHY_173_DATA 0x00000000
+#define DDRSS_PHY_174_DATA 0x00000000
+#define DDRSS_PHY_175_DATA 0x00000000
+#define DDRSS_PHY_176_DATA 0x00000000
+#define DDRSS_PHY_177_DATA 0x00000000
+#define DDRSS_PHY_178_DATA 0x00000000
+#define DDRSS_PHY_179_DATA 0x00000000
+#define DDRSS_PHY_180_DATA 0x00000000
+#define DDRSS_PHY_181_DATA 0x00000000
+#define DDRSS_PHY_182_DATA 0x00000000
+#define DDRSS_PHY_183_DATA 0x00000000
+#define DDRSS_PHY_184_DATA 0x00000000
+#define DDRSS_PHY_185_DATA 0x00000000
+#define DDRSS_PHY_186_DATA 0x00000000
+#define DDRSS_PHY_187_DATA 0x00000000
+#define DDRSS_PHY_188_DATA 0x00000000
+#define DDRSS_PHY_189_DATA 0x00000000
+#define DDRSS_PHY_190_DATA 0x00000000
+#define DDRSS_PHY_191_DATA 0x00000000
+#define DDRSS_PHY_192_DATA 0x00000000
+#define DDRSS_PHY_193_DATA 0x00000000
+#define DDRSS_PHY_194_DATA 0x00000000
+#define DDRSS_PHY_195_DATA 0x00000000
+#define DDRSS_PHY_196_DATA 0x00000000
+#define DDRSS_PHY_197_DATA 0x00000000
+#define DDRSS_PHY_198_DATA 0x00000000
+#define DDRSS_PHY_199_DATA 0x00000000
+#define DDRSS_PHY_200_DATA 0x00000000
+#define DDRSS_PHY_201_DATA 0x00000000
+#define DDRSS_PHY_202_DATA 0x00000000
+#define DDRSS_PHY_203_DATA 0x00000000
+#define DDRSS_PHY_204_DATA 0x00000000
+#define DDRSS_PHY_205_DATA 0x00000000
+#define DDRSS_PHY_206_DATA 0x00000000
+#define DDRSS_PHY_207_DATA 0x00000000
+#define DDRSS_PHY_208_DATA 0x00000000
+#define DDRSS_PHY_209_DATA 0x00000000
+#define DDRSS_PHY_210_DATA 0x00000000
+#define DDRSS_PHY_211_DATA 0x00000000
+#define DDRSS_PHY_212_DATA 0x00000000
+#define DDRSS_PHY_213_DATA 0x00000000
+#define DDRSS_PHY_214_DATA 0x00000000
+#define DDRSS_PHY_215_DATA 0x00000000
+#define DDRSS_PHY_216_DATA 0x00000000
+#define DDRSS_PHY_217_DATA 0x00000000
+#define DDRSS_PHY_218_DATA 0x00000000
+#define DDRSS_PHY_219_DATA 0x00000000
+#define DDRSS_PHY_220_DATA 0x00000000
+#define DDRSS_PHY_221_DATA 0x00000000
+#define DDRSS_PHY_222_DATA 0x00000000
+#define DDRSS_PHY_223_DATA 0x00000000
+#define DDRSS_PHY_224_DATA 0x00000000
+#define DDRSS_PHY_225_DATA 0x00000000
+#define DDRSS_PHY_226_DATA 0x00000000
+#define DDRSS_PHY_227_DATA 0x00000000
+#define DDRSS_PHY_228_DATA 0x00000000
+#define DDRSS_PHY_229_DATA 0x00000000
+#define DDRSS_PHY_230_DATA 0x00000000
+#define DDRSS_PHY_231_DATA 0x00000000
+#define DDRSS_PHY_232_DATA 0x00000000
+#define DDRSS_PHY_233_DATA 0x00000000
+#define DDRSS_PHY_234_DATA 0x00000000
+#define DDRSS_PHY_235_DATA 0x00000000
+#define DDRSS_PHY_236_DATA 0x00000000
+#define DDRSS_PHY_237_DATA 0x00000000
+#define DDRSS_PHY_238_DATA 0x00000000
+#define DDRSS_PHY_239_DATA 0x00000000
+#define DDRSS_PHY_240_DATA 0x00000000
+#define DDRSS_PHY_241_DATA 0x00000000
+#define DDRSS_PHY_242_DATA 0x00000000
+#define DDRSS_PHY_243_DATA 0x00000000
+#define DDRSS_PHY_244_DATA 0x00000000
+#define DDRSS_PHY_245_DATA 0x00000000
+#define DDRSS_PHY_246_DATA 0x00000000
+#define DDRSS_PHY_247_DATA 0x00000000
+#define DDRSS_PHY_248_DATA 0x00000000
+#define DDRSS_PHY_249_DATA 0x00000000
+#define DDRSS_PHY_250_DATA 0x00000000
+#define DDRSS_PHY_251_DATA 0x00000000
+#define DDRSS_PHY_252_DATA 0x00000000
+#define DDRSS_PHY_253_DATA 0x00000000
+#define DDRSS_PHY_254_DATA 0x00000000
+#define DDRSS_PHY_255_DATA 0x00000000
+#define DDRSS_PHY_256_DATA 0x000004F0
+#define DDRSS_PHY_257_DATA 0x00000000
+#define DDRSS_PHY_258_DATA 0x00030200
+#define DDRSS_PHY_259_DATA 0x00000000
+#define DDRSS_PHY_260_DATA 0x00000000
+#define DDRSS_PHY_261_DATA 0x01030000
+#define DDRSS_PHY_262_DATA 0x00010000
+#define DDRSS_PHY_263_DATA 0x01030004
+#define DDRSS_PHY_264_DATA 0x01000000
+#define DDRSS_PHY_265_DATA 0x00000000
+#define DDRSS_PHY_266_DATA 0x00000000
+#define DDRSS_PHY_267_DATA 0x01000001
+#define DDRSS_PHY_268_DATA 0x00000100
+#define DDRSS_PHY_269_DATA 0x000800C0
+#define DDRSS_PHY_270_DATA 0x060100CC
+#define DDRSS_PHY_271_DATA 0x00030066
+#define DDRSS_PHY_272_DATA 0x00000000
+#define DDRSS_PHY_273_DATA 0x00000301
+#define DDRSS_PHY_274_DATA 0x0000AAAA
+#define DDRSS_PHY_275_DATA 0x00005555
+#define DDRSS_PHY_276_DATA 0x0000B5B5
+#define DDRSS_PHY_277_DATA 0x00004A4A
+#define DDRSS_PHY_278_DATA 0x00005656
+#define DDRSS_PHY_279_DATA 0x0000A9A9
+#define DDRSS_PHY_280_DATA 0x0000A9A9
+#define DDRSS_PHY_281_DATA 0x0000B5B5
+#define DDRSS_PHY_282_DATA 0x00000000
+#define DDRSS_PHY_283_DATA 0x00000000
+#define DDRSS_PHY_284_DATA 0x2A000000
+#define DDRSS_PHY_285_DATA 0x00000808
+#define DDRSS_PHY_286_DATA 0x0F000000
+#define DDRSS_PHY_287_DATA 0x00000F0F
+#define DDRSS_PHY_288_DATA 0x10200000
+#define DDRSS_PHY_289_DATA 0x0C002007
+#define DDRSS_PHY_290_DATA 0x00000000
+#define DDRSS_PHY_291_DATA 0x00000000
+#define DDRSS_PHY_292_DATA 0x55555555
+#define DDRSS_PHY_293_DATA 0xAAAAAAAA
+#define DDRSS_PHY_294_DATA 0x55555555
+#define DDRSS_PHY_295_DATA 0xAAAAAAAA
+#define DDRSS_PHY_296_DATA 0x00005555
+#define DDRSS_PHY_297_DATA 0x01000100
+#define DDRSS_PHY_298_DATA 0x00800180
+#define DDRSS_PHY_299_DATA 0x00000000
+#define DDRSS_PHY_300_DATA 0x00000000
+#define DDRSS_PHY_301_DATA 0x00000000
+#define DDRSS_PHY_302_DATA 0x00000000
+#define DDRSS_PHY_303_DATA 0x00000000
+#define DDRSS_PHY_304_DATA 0x00000000
+#define DDRSS_PHY_305_DATA 0x00000000
+#define DDRSS_PHY_306_DATA 0x00000000
+#define DDRSS_PHY_307_DATA 0x00000000
+#define DDRSS_PHY_308_DATA 0x00000000
+#define DDRSS_PHY_309_DATA 0x00000000
+#define DDRSS_PHY_310_DATA 0x00000000
+#define DDRSS_PHY_311_DATA 0x00000000
+#define DDRSS_PHY_312_DATA 0x00000000
+#define DDRSS_PHY_313_DATA 0x00000000
+#define DDRSS_PHY_314_DATA 0x00000000
+#define DDRSS_PHY_315_DATA 0x00000000
+#define DDRSS_PHY_316_DATA 0x00000000
+#define DDRSS_PHY_317_DATA 0x00000000
+#define DDRSS_PHY_318_DATA 0x00000000
+#define DDRSS_PHY_319_DATA 0x00000000
+#define DDRSS_PHY_320_DATA 0x00000000
+#define DDRSS_PHY_321_DATA 0x00000000
+#define DDRSS_PHY_322_DATA 0x00000104
+#define DDRSS_PHY_323_DATA 0x00000120
+#define DDRSS_PHY_324_DATA 0x00000000
+#define DDRSS_PHY_325_DATA 0x00000000
+#define DDRSS_PHY_326_DATA 0x00000000
+#define DDRSS_PHY_327_DATA 0x00000000
+#define DDRSS_PHY_328_DATA 0x00000000
+#define DDRSS_PHY_329_DATA 0x00000000
+#define DDRSS_PHY_330_DATA 0x00000000
+#define DDRSS_PHY_331_DATA 0x00000001
+#define DDRSS_PHY_332_DATA 0x07FF0000
+#define DDRSS_PHY_333_DATA 0x0080081F
+#define DDRSS_PHY_334_DATA 0x00081020
+#define DDRSS_PHY_335_DATA 0x04010000
+#define DDRSS_PHY_336_DATA 0x00000000
+#define DDRSS_PHY_337_DATA 0x00000000
+#define DDRSS_PHY_338_DATA 0x00000000
+#define DDRSS_PHY_339_DATA 0x00000100
+#define DDRSS_PHY_340_DATA 0x01CC0C01
+#define DDRSS_PHY_341_DATA 0x1003CC0C
+#define DDRSS_PHY_342_DATA 0x20000140
+#define DDRSS_PHY_343_DATA 0x07FF0200
+#define DDRSS_PHY_344_DATA 0x0000DD01
+#define DDRSS_PHY_345_DATA 0x10100303
+#define DDRSS_PHY_346_DATA 0x10101010
+#define DDRSS_PHY_347_DATA 0x10101010
+#define DDRSS_PHY_348_DATA 0x00021010
+#define DDRSS_PHY_349_DATA 0x00100010
+#define DDRSS_PHY_350_DATA 0x00100010
+#define DDRSS_PHY_351_DATA 0x00100010
+#define DDRSS_PHY_352_DATA 0x00100010
+#define DDRSS_PHY_353_DATA 0x00050010
+#define DDRSS_PHY_354_DATA 0x51517041
+#define DDRSS_PHY_355_DATA 0x31C06001
+#define DDRSS_PHY_356_DATA 0x07AB0340
+#define DDRSS_PHY_357_DATA 0x00C0C001
+#define DDRSS_PHY_358_DATA 0x0E0D0001
+#define DDRSS_PHY_359_DATA 0x10001000
+#define DDRSS_PHY_360_DATA 0x0C083E42
+#define DDRSS_PHY_361_DATA 0x0F0C3701
+#define DDRSS_PHY_362_DATA 0x01000140
+#define DDRSS_PHY_363_DATA 0x0C000420
+#define DDRSS_PHY_364_DATA 0x00000322
+#define DDRSS_PHY_365_DATA 0x0A0000D0
+#define DDRSS_PHY_366_DATA 0x00030200
+#define DDRSS_PHY_367_DATA 0x02800000
+#define DDRSS_PHY_368_DATA 0x80800000
+#define DDRSS_PHY_369_DATA 0x000E2010
+#define DDRSS_PHY_370_DATA 0x76543210
+#define DDRSS_PHY_371_DATA 0x00000008
+#define DDRSS_PHY_372_DATA 0x02800280
+#define DDRSS_PHY_373_DATA 0x02800280
+#define DDRSS_PHY_374_DATA 0x02800280
+#define DDRSS_PHY_375_DATA 0x02800280
+#define DDRSS_PHY_376_DATA 0x00000280
+#define DDRSS_PHY_377_DATA 0x0000A000
+#define DDRSS_PHY_378_DATA 0x00A000A0
+#define DDRSS_PHY_379_DATA 0x00A000A0
+#define DDRSS_PHY_380_DATA 0x00A000A0
+#define DDRSS_PHY_381_DATA 0x00A000A0
+#define DDRSS_PHY_382_DATA 0x00A000A0
+#define DDRSS_PHY_383_DATA 0x00A000A0
+#define DDRSS_PHY_384_DATA 0x00A000A0
+#define DDRSS_PHY_385_DATA 0x00A000A0
+#define DDRSS_PHY_386_DATA 0x01C200A0
+#define DDRSS_PHY_387_DATA 0x01A00005
+#define DDRSS_PHY_388_DATA 0x00000000
+#define DDRSS_PHY_389_DATA 0x00000000
+#define DDRSS_PHY_390_DATA 0x00080200
+#define DDRSS_PHY_391_DATA 0x00000000
+#define DDRSS_PHY_392_DATA 0x20202000
+#define DDRSS_PHY_393_DATA 0x20202020
+#define DDRSS_PHY_394_DATA 0xF0F02020
+#define DDRSS_PHY_395_DATA 0x00000000
+#define DDRSS_PHY_396_DATA 0x00000000
+#define DDRSS_PHY_397_DATA 0x00000000
+#define DDRSS_PHY_398_DATA 0x00000000
+#define DDRSS_PHY_399_DATA 0x00000000
+#define DDRSS_PHY_400_DATA 0x00000000
+#define DDRSS_PHY_401_DATA 0x00000000
+#define DDRSS_PHY_402_DATA 0x00000000
+#define DDRSS_PHY_403_DATA 0x00000000
+#define DDRSS_PHY_404_DATA 0x00000000
+#define DDRSS_PHY_405_DATA 0x00000000
+#define DDRSS_PHY_406_DATA 0x00000000
+#define DDRSS_PHY_407_DATA 0x00000000
+#define DDRSS_PHY_408_DATA 0x00000000
+#define DDRSS_PHY_409_DATA 0x00000000
+#define DDRSS_PHY_410_DATA 0x00000000
+#define DDRSS_PHY_411_DATA 0x00000000
+#define DDRSS_PHY_412_DATA 0x00000000
+#define DDRSS_PHY_413_DATA 0x00000000
+#define DDRSS_PHY_414_DATA 0x00000000
+#define DDRSS_PHY_415_DATA 0x00000000
+#define DDRSS_PHY_416_DATA 0x00000000
+#define DDRSS_PHY_417_DATA 0x00000000
+#define DDRSS_PHY_418_DATA 0x00000000
+#define DDRSS_PHY_419_DATA 0x00000000
+#define DDRSS_PHY_420_DATA 0x00000000
+#define DDRSS_PHY_421_DATA 0x00000000
+#define DDRSS_PHY_422_DATA 0x00000000
+#define DDRSS_PHY_423_DATA 0x00000000
+#define DDRSS_PHY_424_DATA 0x00000000
+#define DDRSS_PHY_425_DATA 0x00000000
+#define DDRSS_PHY_426_DATA 0x00000000
+#define DDRSS_PHY_427_DATA 0x00000000
+#define DDRSS_PHY_428_DATA 0x00000000
+#define DDRSS_PHY_429_DATA 0x00000000
+#define DDRSS_PHY_430_DATA 0x00000000
+#define DDRSS_PHY_431_DATA 0x00000000
+#define DDRSS_PHY_432_DATA 0x00000000
+#define DDRSS_PHY_433_DATA 0x00000000
+#define DDRSS_PHY_434_DATA 0x00000000
+#define DDRSS_PHY_435_DATA 0x00000000
+#define DDRSS_PHY_436_DATA 0x00000000
+#define DDRSS_PHY_437_DATA 0x00000000
+#define DDRSS_PHY_438_DATA 0x00000000
+#define DDRSS_PHY_439_DATA 0x00000000
+#define DDRSS_PHY_440_DATA 0x00000000
+#define DDRSS_PHY_441_DATA 0x00000000
+#define DDRSS_PHY_442_DATA 0x00000000
+#define DDRSS_PHY_443_DATA 0x00000000
+#define DDRSS_PHY_444_DATA 0x00000000
+#define DDRSS_PHY_445_DATA 0x00000000
+#define DDRSS_PHY_446_DATA 0x00000000
+#define DDRSS_PHY_447_DATA 0x00000000
+#define DDRSS_PHY_448_DATA 0x00000000
+#define DDRSS_PHY_449_DATA 0x00000000
+#define DDRSS_PHY_450_DATA 0x00000000
+#define DDRSS_PHY_451_DATA 0x00000000
+#define DDRSS_PHY_452_DATA 0x00000000
+#define DDRSS_PHY_453_DATA 0x00000000
+#define DDRSS_PHY_454_DATA 0x00000000
+#define DDRSS_PHY_455_DATA 0x00000000
+#define DDRSS_PHY_456_DATA 0x00000000
+#define DDRSS_PHY_457_DATA 0x00000000
+#define DDRSS_PHY_458_DATA 0x00000000
+#define DDRSS_PHY_459_DATA 0x00000000
+#define DDRSS_PHY_460_DATA 0x00000000
+#define DDRSS_PHY_461_DATA 0x00000000
+#define DDRSS_PHY_462_DATA 0x00000000
+#define DDRSS_PHY_463_DATA 0x00000000
+#define DDRSS_PHY_464_DATA 0x00000000
+#define DDRSS_PHY_465_DATA 0x00000000
+#define DDRSS_PHY_466_DATA 0x00000000
+#define DDRSS_PHY_467_DATA 0x00000000
+#define DDRSS_PHY_468_DATA 0x00000000
+#define DDRSS_PHY_469_DATA 0x00000000
+#define DDRSS_PHY_470_DATA 0x00000000
+#define DDRSS_PHY_471_DATA 0x00000000
+#define DDRSS_PHY_472_DATA 0x00000000
+#define DDRSS_PHY_473_DATA 0x00000000
+#define DDRSS_PHY_474_DATA 0x00000000
+#define DDRSS_PHY_475_DATA 0x00000000
+#define DDRSS_PHY_476_DATA 0x00000000
+#define DDRSS_PHY_477_DATA 0x00000000
+#define DDRSS_PHY_478_DATA 0x00000000
+#define DDRSS_PHY_479_DATA 0x00000000
+#define DDRSS_PHY_480_DATA 0x00000000
+#define DDRSS_PHY_481_DATA 0x00000000
+#define DDRSS_PHY_482_DATA 0x00000000
+#define DDRSS_PHY_483_DATA 0x00000000
+#define DDRSS_PHY_484_DATA 0x00000000
+#define DDRSS_PHY_485_DATA 0x00000000
+#define DDRSS_PHY_486_DATA 0x00000000
+#define DDRSS_PHY_487_DATA 0x00000000
+#define DDRSS_PHY_488_DATA 0x00000000
+#define DDRSS_PHY_489_DATA 0x00000000
+#define DDRSS_PHY_490_DATA 0x00000000
+#define DDRSS_PHY_491_DATA 0x00000000
+#define DDRSS_PHY_492_DATA 0x00000000
+#define DDRSS_PHY_493_DATA 0x00000000
+#define DDRSS_PHY_494_DATA 0x00000000
+#define DDRSS_PHY_495_DATA 0x00000000
+#define DDRSS_PHY_496_DATA 0x00000000
+#define DDRSS_PHY_497_DATA 0x00000000
+#define DDRSS_PHY_498_DATA 0x00000000
+#define DDRSS_PHY_499_DATA 0x00000000
+#define DDRSS_PHY_500_DATA 0x00000000
+#define DDRSS_PHY_501_DATA 0x00000000
+#define DDRSS_PHY_502_DATA 0x00000000
+#define DDRSS_PHY_503_DATA 0x00000000
+#define DDRSS_PHY_504_DATA 0x00000000
+#define DDRSS_PHY_505_DATA 0x00000000
+#define DDRSS_PHY_506_DATA 0x00000000
+#define DDRSS_PHY_507_DATA 0x00000000
+#define DDRSS_PHY_508_DATA 0x00000000
+#define DDRSS_PHY_509_DATA 0x00000000
+#define DDRSS_PHY_510_DATA 0x00000000
+#define DDRSS_PHY_511_DATA 0x00000000
+#define DDRSS_PHY_512_DATA 0x000004F0
+#define DDRSS_PHY_513_DATA 0x00000000
+#define DDRSS_PHY_514_DATA 0x00030200
+#define DDRSS_PHY_515_DATA 0x00000000
+#define DDRSS_PHY_516_DATA 0x00000000
+#define DDRSS_PHY_517_DATA 0x01030000
+#define DDRSS_PHY_518_DATA 0x00010000
+#define DDRSS_PHY_519_DATA 0x01030004
+#define DDRSS_PHY_520_DATA 0x01000000
+#define DDRSS_PHY_521_DATA 0x00000000
+#define DDRSS_PHY_522_DATA 0x00000000
+#define DDRSS_PHY_523_DATA 0x01000001
+#define DDRSS_PHY_524_DATA 0x00000100
+#define DDRSS_PHY_525_DATA 0x000800C0
+#define DDRSS_PHY_526_DATA 0x060100CC
+#define DDRSS_PHY_527_DATA 0x00030066
+#define DDRSS_PHY_528_DATA 0x00000000
+#define DDRSS_PHY_529_DATA 0x00000301
+#define DDRSS_PHY_530_DATA 0x0000AAAA
+#define DDRSS_PHY_531_DATA 0x00005555
+#define DDRSS_PHY_532_DATA 0x0000B5B5
+#define DDRSS_PHY_533_DATA 0x00004A4A
+#define DDRSS_PHY_534_DATA 0x00005656
+#define DDRSS_PHY_535_DATA 0x0000A9A9
+#define DDRSS_PHY_536_DATA 0x0000A9A9
+#define DDRSS_PHY_537_DATA 0x0000B5B5
+#define DDRSS_PHY_538_DATA 0x00000000
+#define DDRSS_PHY_539_DATA 0x00000000
+#define DDRSS_PHY_540_DATA 0x2A000000
+#define DDRSS_PHY_541_DATA 0x00000808
+#define DDRSS_PHY_542_DATA 0x0F000000
+#define DDRSS_PHY_543_DATA 0x00000F0F
+#define DDRSS_PHY_544_DATA 0x10200000
+#define DDRSS_PHY_545_DATA 0x0C002007
+#define DDRSS_PHY_546_DATA 0x00000000
+#define DDRSS_PHY_547_DATA 0x00000000
+#define DDRSS_PHY_548_DATA 0x55555555
+#define DDRSS_PHY_549_DATA 0xAAAAAAAA
+#define DDRSS_PHY_550_DATA 0x55555555
+#define DDRSS_PHY_551_DATA 0xAAAAAAAA
+#define DDRSS_PHY_552_DATA 0x00005555
+#define DDRSS_PHY_553_DATA 0x01000100
+#define DDRSS_PHY_554_DATA 0x00800180
+#define DDRSS_PHY_555_DATA 0x00000001
+#define DDRSS_PHY_556_DATA 0x00000000
+#define DDRSS_PHY_557_DATA 0x00000000
+#define DDRSS_PHY_558_DATA 0x00000000
+#define DDRSS_PHY_559_DATA 0x00000000
+#define DDRSS_PHY_560_DATA 0x00000000
+#define DDRSS_PHY_561_DATA 0x00000000
+#define DDRSS_PHY_562_DATA 0x00000000
+#define DDRSS_PHY_563_DATA 0x00000000
+#define DDRSS_PHY_564_DATA 0x00000000
+#define DDRSS_PHY_565_DATA 0x00000000
+#define DDRSS_PHY_566_DATA 0x00000000
+#define DDRSS_PHY_567_DATA 0x00000000
+#define DDRSS_PHY_568_DATA 0x00000000
+#define DDRSS_PHY_569_DATA 0x00000000
+#define DDRSS_PHY_570_DATA 0x00000000
+#define DDRSS_PHY_571_DATA 0x00000000
+#define DDRSS_PHY_572_DATA 0x00000000
+#define DDRSS_PHY_573_DATA 0x00000000
+#define DDRSS_PHY_574_DATA 0x00000000
+#define DDRSS_PHY_575_DATA 0x00000000
+#define DDRSS_PHY_576_DATA 0x00000000
+#define DDRSS_PHY_577_DATA 0x00000000
+#define DDRSS_PHY_578_DATA 0x00000104
+#define DDRSS_PHY_579_DATA 0x00000120
+#define DDRSS_PHY_580_DATA 0x00000000
+#define DDRSS_PHY_581_DATA 0x00000000
+#define DDRSS_PHY_582_DATA 0x00000000
+#define DDRSS_PHY_583_DATA 0x00000000
+#define DDRSS_PHY_584_DATA 0x00000000
+#define DDRSS_PHY_585_DATA 0x00000000
+#define DDRSS_PHY_586_DATA 0x00000000
+#define DDRSS_PHY_587_DATA 0x00000001
+#define DDRSS_PHY_588_DATA 0x07FF0000
+#define DDRSS_PHY_589_DATA 0x0080081F
+#define DDRSS_PHY_590_DATA 0x00081020
+#define DDRSS_PHY_591_DATA 0x04010000
+#define DDRSS_PHY_592_DATA 0x00000000
+#define DDRSS_PHY_593_DATA 0x00000000
+#define DDRSS_PHY_594_DATA 0x00000000
+#define DDRSS_PHY_595_DATA 0x00000100
+#define DDRSS_PHY_596_DATA 0x01CC0C01
+#define DDRSS_PHY_597_DATA 0x1003CC0C
+#define DDRSS_PHY_598_DATA 0x20000140
+#define DDRSS_PHY_599_DATA 0x07FF0200
+#define DDRSS_PHY_600_DATA 0x0000DD01
+#define DDRSS_PHY_601_DATA 0x10100303
+#define DDRSS_PHY_602_DATA 0x10101010
+#define DDRSS_PHY_603_DATA 0x10101010
+#define DDRSS_PHY_604_DATA 0x00021010
+#define DDRSS_PHY_605_DATA 0x00100010
+#define DDRSS_PHY_606_DATA 0x00100010
+#define DDRSS_PHY_607_DATA 0x00100010
+#define DDRSS_PHY_608_DATA 0x00100010
+#define DDRSS_PHY_609_DATA 0x00050010
+#define DDRSS_PHY_610_DATA 0x51517041
+#define DDRSS_PHY_611_DATA 0x31C06001
+#define DDRSS_PHY_612_DATA 0x07AB0340
+#define DDRSS_PHY_613_DATA 0x00C0C001
+#define DDRSS_PHY_614_DATA 0x0E0D0001
+#define DDRSS_PHY_615_DATA 0x10001000
+#define DDRSS_PHY_616_DATA 0x0C083E42
+#define DDRSS_PHY_617_DATA 0x0F0C3701
+#define DDRSS_PHY_618_DATA 0x01000140
+#define DDRSS_PHY_619_DATA 0x0C000420
+#define DDRSS_PHY_620_DATA 0x00000322
+#define DDRSS_PHY_621_DATA 0x0A0000D0
+#define DDRSS_PHY_622_DATA 0x00030200
+#define DDRSS_PHY_623_DATA 0x02800000
+#define DDRSS_PHY_624_DATA 0x80800000
+#define DDRSS_PHY_625_DATA 0x000E2010
+#define DDRSS_PHY_626_DATA 0x76543210
+#define DDRSS_PHY_627_DATA 0x00000008
+#define DDRSS_PHY_628_DATA 0x02800280
+#define DDRSS_PHY_629_DATA 0x02800280
+#define DDRSS_PHY_630_DATA 0x02800280
+#define DDRSS_PHY_631_DATA 0x02800280
+#define DDRSS_PHY_632_DATA 0x00000280
+#define DDRSS_PHY_633_DATA 0x0000A000
+#define DDRSS_PHY_634_DATA 0x00A000A0
+#define DDRSS_PHY_635_DATA 0x00A000A0
+#define DDRSS_PHY_636_DATA 0x00A000A0
+#define DDRSS_PHY_637_DATA 0x00A000A0
+#define DDRSS_PHY_638_DATA 0x00A000A0
+#define DDRSS_PHY_639_DATA 0x00A000A0
+#define DDRSS_PHY_640_DATA 0x00A000A0
+#define DDRSS_PHY_641_DATA 0x00A000A0
+#define DDRSS_PHY_642_DATA 0x01C200A0
+#define DDRSS_PHY_643_DATA 0x01A00005
+#define DDRSS_PHY_644_DATA 0x00000000
+#define DDRSS_PHY_645_DATA 0x00000000
+#define DDRSS_PHY_646_DATA 0x00080200
+#define DDRSS_PHY_647_DATA 0x00000000
+#define DDRSS_PHY_648_DATA 0x20202000
+#define DDRSS_PHY_649_DATA 0x20202020
+#define DDRSS_PHY_650_DATA 0xF0F02020
+#define DDRSS_PHY_651_DATA 0x00000000
+#define DDRSS_PHY_652_DATA 0x00000000
+#define DDRSS_PHY_653_DATA 0x00000000
+#define DDRSS_PHY_654_DATA 0x00000000
+#define DDRSS_PHY_655_DATA 0x00000000
+#define DDRSS_PHY_656_DATA 0x00000000
+#define DDRSS_PHY_657_DATA 0x00000000
+#define DDRSS_PHY_658_DATA 0x00000000
+#define DDRSS_PHY_659_DATA 0x00000000
+#define DDRSS_PHY_660_DATA 0x00000000
+#define DDRSS_PHY_661_DATA 0x00000000
+#define DDRSS_PHY_662_DATA 0x00000000
+#define DDRSS_PHY_663_DATA 0x00000000
+#define DDRSS_PHY_664_DATA 0x00000000
+#define DDRSS_PHY_665_DATA 0x00000000
+#define DDRSS_PHY_666_DATA 0x00000000
+#define DDRSS_PHY_667_DATA 0x00000000
+#define DDRSS_PHY_668_DATA 0x00000000
+#define DDRSS_PHY_669_DATA 0x00000000
+#define DDRSS_PHY_670_DATA 0x00000000
+#define DDRSS_PHY_671_DATA 0x00000000
+#define DDRSS_PHY_672_DATA 0x00000000
+#define DDRSS_PHY_673_DATA 0x00000000
+#define DDRSS_PHY_674_DATA 0x00000000
+#define DDRSS_PHY_675_DATA 0x00000000
+#define DDRSS_PHY_676_DATA 0x00000000
+#define DDRSS_PHY_677_DATA 0x00000000
+#define DDRSS_PHY_678_DATA 0x00000000
+#define DDRSS_PHY_679_DATA 0x00000000
+#define DDRSS_PHY_680_DATA 0x00000000
+#define DDRSS_PHY_681_DATA 0x00000000
+#define DDRSS_PHY_682_DATA 0x00000000
+#define DDRSS_PHY_683_DATA 0x00000000
+#define DDRSS_PHY_684_DATA 0x00000000
+#define DDRSS_PHY_685_DATA 0x00000000
+#define DDRSS_PHY_686_DATA 0x00000000
+#define DDRSS_PHY_687_DATA 0x00000000
+#define DDRSS_PHY_688_DATA 0x00000000
+#define DDRSS_PHY_689_DATA 0x00000000
+#define DDRSS_PHY_690_DATA 0x00000000
+#define DDRSS_PHY_691_DATA 0x00000000
+#define DDRSS_PHY_692_DATA 0x00000000
+#define DDRSS_PHY_693_DATA 0x00000000
+#define DDRSS_PHY_694_DATA 0x00000000
+#define DDRSS_PHY_695_DATA 0x00000000
+#define DDRSS_PHY_696_DATA 0x00000000
+#define DDRSS_PHY_697_DATA 0x00000000
+#define DDRSS_PHY_698_DATA 0x00000000
+#define DDRSS_PHY_699_DATA 0x00000000
+#define DDRSS_PHY_700_DATA 0x00000000
+#define DDRSS_PHY_701_DATA 0x00000000
+#define DDRSS_PHY_702_DATA 0x00000000
+#define DDRSS_PHY_703_DATA 0x00000000
+#define DDRSS_PHY_704_DATA 0x00000000
+#define DDRSS_PHY_705_DATA 0x00000000
+#define DDRSS_PHY_706_DATA 0x00000000
+#define DDRSS_PHY_707_DATA 0x00000000
+#define DDRSS_PHY_708_DATA 0x00000000
+#define DDRSS_PHY_709_DATA 0x00000000
+#define DDRSS_PHY_710_DATA 0x00000000
+#define DDRSS_PHY_711_DATA 0x00000000
+#define DDRSS_PHY_712_DATA 0x00000000
+#define DDRSS_PHY_713_DATA 0x00000000
+#define DDRSS_PHY_714_DATA 0x00000000
+#define DDRSS_PHY_715_DATA 0x00000000
+#define DDRSS_PHY_716_DATA 0x00000000
+#define DDRSS_PHY_717_DATA 0x00000000
+#define DDRSS_PHY_718_DATA 0x00000000
+#define DDRSS_PHY_719_DATA 0x00000000
+#define DDRSS_PHY_720_DATA 0x00000000
+#define DDRSS_PHY_721_DATA 0x00000000
+#define DDRSS_PHY_722_DATA 0x00000000
+#define DDRSS_PHY_723_DATA 0x00000000
+#define DDRSS_PHY_724_DATA 0x00000000
+#define DDRSS_PHY_725_DATA 0x00000000
+#define DDRSS_PHY_726_DATA 0x00000000
+#define DDRSS_PHY_727_DATA 0x00000000
+#define DDRSS_PHY_728_DATA 0x00000000
+#define DDRSS_PHY_729_DATA 0x00000000
+#define DDRSS_PHY_730_DATA 0x00000000
+#define DDRSS_PHY_731_DATA 0x00000000
+#define DDRSS_PHY_732_DATA 0x00000000
+#define DDRSS_PHY_733_DATA 0x00000000
+#define DDRSS_PHY_734_DATA 0x00000000
+#define DDRSS_PHY_735_DATA 0x00000000
+#define DDRSS_PHY_736_DATA 0x00000000
+#define DDRSS_PHY_737_DATA 0x00000000
+#define DDRSS_PHY_738_DATA 0x00000000
+#define DDRSS_PHY_739_DATA 0x00000000
+#define DDRSS_PHY_740_DATA 0x00000000
+#define DDRSS_PHY_741_DATA 0x00000000
+#define DDRSS_PHY_742_DATA 0x00000000
+#define DDRSS_PHY_743_DATA 0x00000000
+#define DDRSS_PHY_744_DATA 0x00000000
+#define DDRSS_PHY_745_DATA 0x00000000
+#define DDRSS_PHY_746_DATA 0x00000000
+#define DDRSS_PHY_747_DATA 0x00000000
+#define DDRSS_PHY_748_DATA 0x00000000
+#define DDRSS_PHY_749_DATA 0x00000000
+#define DDRSS_PHY_750_DATA 0x00000000
+#define DDRSS_PHY_751_DATA 0x00000000
+#define DDRSS_PHY_752_DATA 0x00000000
+#define DDRSS_PHY_753_DATA 0x00000000
+#define DDRSS_PHY_754_DATA 0x00000000
+#define DDRSS_PHY_755_DATA 0x00000000
+#define DDRSS_PHY_756_DATA 0x00000000
+#define DDRSS_PHY_757_DATA 0x00000000
+#define DDRSS_PHY_758_DATA 0x00000000
+#define DDRSS_PHY_759_DATA 0x00000000
+#define DDRSS_PHY_760_DATA 0x00000000
+#define DDRSS_PHY_761_DATA 0x00000000
+#define DDRSS_PHY_762_DATA 0x00000000
+#define DDRSS_PHY_763_DATA 0x00000000
+#define DDRSS_PHY_764_DATA 0x00000000
+#define DDRSS_PHY_765_DATA 0x00000000
+#define DDRSS_PHY_766_DATA 0x00000000
+#define DDRSS_PHY_767_DATA 0x00000000
+#define DDRSS_PHY_768_DATA 0x000004F0
+#define DDRSS_PHY_769_DATA 0x00000000
+#define DDRSS_PHY_770_DATA 0x00030200
+#define DDRSS_PHY_771_DATA 0x00000000
+#define DDRSS_PHY_772_DATA 0x00000000
+#define DDRSS_PHY_773_DATA 0x01030000
+#define DDRSS_PHY_774_DATA 0x00010000
+#define DDRSS_PHY_775_DATA 0x01030004
+#define DDRSS_PHY_776_DATA 0x01000000
+#define DDRSS_PHY_777_DATA 0x00000000
+#define DDRSS_PHY_778_DATA 0x00000000
+#define DDRSS_PHY_779_DATA 0x01000001
+#define DDRSS_PHY_780_DATA 0x00000100
+#define DDRSS_PHY_781_DATA 0x000800C0
+#define DDRSS_PHY_782_DATA 0x060100CC
+#define DDRSS_PHY_783_DATA 0x00030066
+#define DDRSS_PHY_784_DATA 0x00000000
+#define DDRSS_PHY_785_DATA 0x00000301
+#define DDRSS_PHY_786_DATA 0x0000AAAA
+#define DDRSS_PHY_787_DATA 0x00005555
+#define DDRSS_PHY_788_DATA 0x0000B5B5
+#define DDRSS_PHY_789_DATA 0x00004A4A
+#define DDRSS_PHY_790_DATA 0x00005656
+#define DDRSS_PHY_791_DATA 0x0000A9A9
+#define DDRSS_PHY_792_DATA 0x0000A9A9
+#define DDRSS_PHY_793_DATA 0x0000B5B5
+#define DDRSS_PHY_794_DATA 0x00000000
+#define DDRSS_PHY_795_DATA 0x00000000
+#define DDRSS_PHY_796_DATA 0x2A000000
+#define DDRSS_PHY_797_DATA 0x00000808
+#define DDRSS_PHY_798_DATA 0x0F000000
+#define DDRSS_PHY_799_DATA 0x00000F0F
+#define DDRSS_PHY_800_DATA 0x10200000
+#define DDRSS_PHY_801_DATA 0x0C002007
+#define DDRSS_PHY_802_DATA 0x00000000
+#define DDRSS_PHY_803_DATA 0x00000000
+#define DDRSS_PHY_804_DATA 0x55555555
+#define DDRSS_PHY_805_DATA 0xAAAAAAAA
+#define DDRSS_PHY_806_DATA 0x55555555
+#define DDRSS_PHY_807_DATA 0xAAAAAAAA
+#define DDRSS_PHY_808_DATA 0x00005555
+#define DDRSS_PHY_809_DATA 0x01000100
+#define DDRSS_PHY_810_DATA 0x00800180
+#define DDRSS_PHY_811_DATA 0x00000000
+#define DDRSS_PHY_812_DATA 0x00000000
+#define DDRSS_PHY_813_DATA 0x00000000
+#define DDRSS_PHY_814_DATA 0x00000000
+#define DDRSS_PHY_815_DATA 0x00000000
+#define DDRSS_PHY_816_DATA 0x00000000
+#define DDRSS_PHY_817_DATA 0x00000000
+#define DDRSS_PHY_818_DATA 0x00000000
+#define DDRSS_PHY_819_DATA 0x00000000
+#define DDRSS_PHY_820_DATA 0x00000000
+#define DDRSS_PHY_821_DATA 0x00000000
+#define DDRSS_PHY_822_DATA 0x00000000
+#define DDRSS_PHY_823_DATA 0x00000000
+#define DDRSS_PHY_824_DATA 0x00000000
+#define DDRSS_PHY_825_DATA 0x00000000
+#define DDRSS_PHY_826_DATA 0x00000000
+#define DDRSS_PHY_827_DATA 0x00000000
+#define DDRSS_PHY_828_DATA 0x00000000
+#define DDRSS_PHY_829_DATA 0x00000000
+#define DDRSS_PHY_830_DATA 0x00000000
+#define DDRSS_PHY_831_DATA 0x00000000
+#define DDRSS_PHY_832_DATA 0x00000000
+#define DDRSS_PHY_833_DATA 0x00000000
+#define DDRSS_PHY_834_DATA 0x00000104
+#define DDRSS_PHY_835_DATA 0x00000120
+#define DDRSS_PHY_836_DATA 0x00000000
+#define DDRSS_PHY_837_DATA 0x00000000
+#define DDRSS_PHY_838_DATA 0x00000000
+#define DDRSS_PHY_839_DATA 0x00000000
+#define DDRSS_PHY_840_DATA 0x00000000
+#define DDRSS_PHY_841_DATA 0x00000000
+#define DDRSS_PHY_842_DATA 0x00000000
+#define DDRSS_PHY_843_DATA 0x00000001
+#define DDRSS_PHY_844_DATA 0x07FF0000
+#define DDRSS_PHY_845_DATA 0x0080081F
+#define DDRSS_PHY_846_DATA 0x00081020
+#define DDRSS_PHY_847_DATA 0x04010000
+#define DDRSS_PHY_848_DATA 0x00000000
+#define DDRSS_PHY_849_DATA 0x00000000
+#define DDRSS_PHY_850_DATA 0x00000000
+#define DDRSS_PHY_851_DATA 0x00000100
+#define DDRSS_PHY_852_DATA 0x01CC0C01
+#define DDRSS_PHY_853_DATA 0x1003CC0C
+#define DDRSS_PHY_854_DATA 0x20000140
+#define DDRSS_PHY_855_DATA 0x07FF0200
+#define DDRSS_PHY_856_DATA 0x0000DD01
+#define DDRSS_PHY_857_DATA 0x10100303
+#define DDRSS_PHY_858_DATA 0x10101010
+#define DDRSS_PHY_859_DATA 0x10101010
+#define DDRSS_PHY_860_DATA 0x00021010
+#define DDRSS_PHY_861_DATA 0x00100010
+#define DDRSS_PHY_862_DATA 0x00100010
+#define DDRSS_PHY_863_DATA 0x00100010
+#define DDRSS_PHY_864_DATA 0x00100010
+#define DDRSS_PHY_865_DATA 0x00050010
+#define DDRSS_PHY_866_DATA 0x51517041
+#define DDRSS_PHY_867_DATA 0x31C06001
+#define DDRSS_PHY_868_DATA 0x07AB0340
+#define DDRSS_PHY_869_DATA 0x00C0C001
+#define DDRSS_PHY_870_DATA 0x0E0D0001
+#define DDRSS_PHY_871_DATA 0x10001000
+#define DDRSS_PHY_872_DATA 0x0C083E42
+#define DDRSS_PHY_873_DATA 0x0F0C3701
+#define DDRSS_PHY_874_DATA 0x01000140
+#define DDRSS_PHY_875_DATA 0x0C000420
+#define DDRSS_PHY_876_DATA 0x00000322
+#define DDRSS_PHY_877_DATA 0x0A0000D0
+#define DDRSS_PHY_878_DATA 0x00030200
+#define DDRSS_PHY_879_DATA 0x02800000
+#define DDRSS_PHY_880_DATA 0x80800000
+#define DDRSS_PHY_881_DATA 0x000E2010
+#define DDRSS_PHY_882_DATA 0x76543210
+#define DDRSS_PHY_883_DATA 0x00000008
+#define DDRSS_PHY_884_DATA 0x02800280
+#define DDRSS_PHY_885_DATA 0x02800280
+#define DDRSS_PHY_886_DATA 0x02800280
+#define DDRSS_PHY_887_DATA 0x02800280
+#define DDRSS_PHY_888_DATA 0x00000280
+#define DDRSS_PHY_889_DATA 0x0000A000
+#define DDRSS_PHY_890_DATA 0x00A000A0
+#define DDRSS_PHY_891_DATA 0x00A000A0
+#define DDRSS_PHY_892_DATA 0x00A000A0
+#define DDRSS_PHY_893_DATA 0x00A000A0
+#define DDRSS_PHY_894_DATA 0x00A000A0
+#define DDRSS_PHY_895_DATA 0x00A000A0
+#define DDRSS_PHY_896_DATA 0x00A000A0
+#define DDRSS_PHY_897_DATA 0x00A000A0
+#define DDRSS_PHY_898_DATA 0x01C200A0
+#define DDRSS_PHY_899_DATA 0x01A00005
+#define DDRSS_PHY_900_DATA 0x00000000
+#define DDRSS_PHY_901_DATA 0x00000000
+#define DDRSS_PHY_902_DATA 0x00080200
+#define DDRSS_PHY_903_DATA 0x00000000
+#define DDRSS_PHY_904_DATA 0x20202000
+#define DDRSS_PHY_905_DATA 0x20202020
+#define DDRSS_PHY_906_DATA 0xF0F02020
+#define DDRSS_PHY_907_DATA 0x00000000
+#define DDRSS_PHY_908_DATA 0x00000000
+#define DDRSS_PHY_909_DATA 0x00000000
+#define DDRSS_PHY_910_DATA 0x00000000
+#define DDRSS_PHY_911_DATA 0x00000000
+#define DDRSS_PHY_912_DATA 0x00000000
+#define DDRSS_PHY_913_DATA 0x00000000
+#define DDRSS_PHY_914_DATA 0x00000000
+#define DDRSS_PHY_915_DATA 0x00000000
+#define DDRSS_PHY_916_DATA 0x00000000
+#define DDRSS_PHY_917_DATA 0x00000000
+#define DDRSS_PHY_918_DATA 0x00000000
+#define DDRSS_PHY_919_DATA 0x00000000
+#define DDRSS_PHY_920_DATA 0x00000000
+#define DDRSS_PHY_921_DATA 0x00000000
+#define DDRSS_PHY_922_DATA 0x00000000
+#define DDRSS_PHY_923_DATA 0x00000000
+#define DDRSS_PHY_924_DATA 0x00000000
+#define DDRSS_PHY_925_DATA 0x00000000
+#define DDRSS_PHY_926_DATA 0x00000000
+#define DDRSS_PHY_927_DATA 0x00000000
+#define DDRSS_PHY_928_DATA 0x00000000
+#define DDRSS_PHY_929_DATA 0x00000000
+#define DDRSS_PHY_930_DATA 0x00000000
+#define DDRSS_PHY_931_DATA 0x00000000
+#define DDRSS_PHY_932_DATA 0x00000000
+#define DDRSS_PHY_933_DATA 0x00000000
+#define DDRSS_PHY_934_DATA 0x00000000
+#define DDRSS_PHY_935_DATA 0x00000000
+#define DDRSS_PHY_936_DATA 0x00000000
+#define DDRSS_PHY_937_DATA 0x00000000
+#define DDRSS_PHY_938_DATA 0x00000000
+#define DDRSS_PHY_939_DATA 0x00000000
+#define DDRSS_PHY_940_DATA 0x00000000
+#define DDRSS_PHY_941_DATA 0x00000000
+#define DDRSS_PHY_942_DATA 0x00000000
+#define DDRSS_PHY_943_DATA 0x00000000
+#define DDRSS_PHY_944_DATA 0x00000000
+#define DDRSS_PHY_945_DATA 0x00000000
+#define DDRSS_PHY_946_DATA 0x00000000
+#define DDRSS_PHY_947_DATA 0x00000000
+#define DDRSS_PHY_948_DATA 0x00000000
+#define DDRSS_PHY_949_DATA 0x00000000
+#define DDRSS_PHY_950_DATA 0x00000000
+#define DDRSS_PHY_951_DATA 0x00000000
+#define DDRSS_PHY_952_DATA 0x00000000
+#define DDRSS_PHY_953_DATA 0x00000000
+#define DDRSS_PHY_954_DATA 0x00000000
+#define DDRSS_PHY_955_DATA 0x00000000
+#define DDRSS_PHY_956_DATA 0x00000000
+#define DDRSS_PHY_957_DATA 0x00000000
+#define DDRSS_PHY_958_DATA 0x00000000
+#define DDRSS_PHY_959_DATA 0x00000000
+#define DDRSS_PHY_960_DATA 0x00000000
+#define DDRSS_PHY_961_DATA 0x00000000
+#define DDRSS_PHY_962_DATA 0x00000000
+#define DDRSS_PHY_963_DATA 0x00000000
+#define DDRSS_PHY_964_DATA 0x00000000
+#define DDRSS_PHY_965_DATA 0x00000000
+#define DDRSS_PHY_966_DATA 0x00000000
+#define DDRSS_PHY_967_DATA 0x00000000
+#define DDRSS_PHY_968_DATA 0x00000000
+#define DDRSS_PHY_969_DATA 0x00000000
+#define DDRSS_PHY_970_DATA 0x00000000
+#define DDRSS_PHY_971_DATA 0x00000000
+#define DDRSS_PHY_972_DATA 0x00000000
+#define DDRSS_PHY_973_DATA 0x00000000
+#define DDRSS_PHY_974_DATA 0x00000000
+#define DDRSS_PHY_975_DATA 0x00000000
+#define DDRSS_PHY_976_DATA 0x00000000
+#define DDRSS_PHY_977_DATA 0x00000000
+#define DDRSS_PHY_978_DATA 0x00000000
+#define DDRSS_PHY_979_DATA 0x00000000
+#define DDRSS_PHY_980_DATA 0x00000000
+#define DDRSS_PHY_981_DATA 0x00000000
+#define DDRSS_PHY_982_DATA 0x00000000
+#define DDRSS_PHY_983_DATA 0x00000000
+#define DDRSS_PHY_984_DATA 0x00000000
+#define DDRSS_PHY_985_DATA 0x00000000
+#define DDRSS_PHY_986_DATA 0x00000000
+#define DDRSS_PHY_987_DATA 0x00000000
+#define DDRSS_PHY_988_DATA 0x00000000
+#define DDRSS_PHY_989_DATA 0x00000000
+#define DDRSS_PHY_990_DATA 0x00000000
+#define DDRSS_PHY_991_DATA 0x00000000
+#define DDRSS_PHY_992_DATA 0x00000000
+#define DDRSS_PHY_993_DATA 0x00000000
+#define DDRSS_PHY_994_DATA 0x00000000
+#define DDRSS_PHY_995_DATA 0x00000000
+#define DDRSS_PHY_996_DATA 0x00000000
+#define DDRSS_PHY_997_DATA 0x00000000
+#define DDRSS_PHY_998_DATA 0x00000000
+#define DDRSS_PHY_999_DATA 0x00000000
+#define DDRSS_PHY_1000_DATA 0x00000000
+#define DDRSS_PHY_1001_DATA 0x00000000
+#define DDRSS_PHY_1002_DATA 0x00000000
+#define DDRSS_PHY_1003_DATA 0x00000000
+#define DDRSS_PHY_1004_DATA 0x00000000
+#define DDRSS_PHY_1005_DATA 0x00000000
+#define DDRSS_PHY_1006_DATA 0x00000000
+#define DDRSS_PHY_1007_DATA 0x00000000
+#define DDRSS_PHY_1008_DATA 0x00000000
+#define DDRSS_PHY_1009_DATA 0x00000000
+#define DDRSS_PHY_1010_DATA 0x00000000
+#define DDRSS_PHY_1011_DATA 0x00000000
+#define DDRSS_PHY_1012_DATA 0x00000000
+#define DDRSS_PHY_1013_DATA 0x00000000
+#define DDRSS_PHY_1014_DATA 0x00000000
+#define DDRSS_PHY_1015_DATA 0x00000000
+#define DDRSS_PHY_1016_DATA 0x00000000
+#define DDRSS_PHY_1017_DATA 0x00000000
+#define DDRSS_PHY_1018_DATA 0x00000000
+#define DDRSS_PHY_1019_DATA 0x00000000
+#define DDRSS_PHY_1020_DATA 0x00000000
+#define DDRSS_PHY_1021_DATA 0x00000000
+#define DDRSS_PHY_1022_DATA 0x00000000
+#define DDRSS_PHY_1023_DATA 0x00000000
+#define DDRSS_PHY_1024_DATA 0x00000000
+#define DDRSS_PHY_1025_DATA 0x00000000
+#define DDRSS_PHY_1026_DATA 0x00000000
+#define DDRSS_PHY_1027_DATA 0x00000000
+#define DDRSS_PHY_1028_DATA 0x00000000
+#define DDRSS_PHY_1029_DATA 0x00000100
+#define DDRSS_PHY_1030_DATA 0x00000200
+#define DDRSS_PHY_1031_DATA 0x00000000
+#define DDRSS_PHY_1032_DATA 0x00000000
+#define DDRSS_PHY_1033_DATA 0x00000000
+#define DDRSS_PHY_1034_DATA 0x00000000
+#define DDRSS_PHY_1035_DATA 0x00400000
+#define DDRSS_PHY_1036_DATA 0x00000080
+#define DDRSS_PHY_1037_DATA 0x00DCBA98
+#define DDRSS_PHY_1038_DATA 0x03000000
+#define DDRSS_PHY_1039_DATA 0x00200000
+#define DDRSS_PHY_1040_DATA 0x00000000
+#define DDRSS_PHY_1041_DATA 0x00000000
+#define DDRSS_PHY_1042_DATA 0x00000000
+#define DDRSS_PHY_1043_DATA 0x00000000
+#define DDRSS_PHY_1044_DATA 0x00000000
+#define DDRSS_PHY_1045_DATA 0x0000002A
+#define DDRSS_PHY_1046_DATA 0x00000015
+#define DDRSS_PHY_1047_DATA 0x00000015
+#define DDRSS_PHY_1048_DATA 0x0000002A
+#define DDRSS_PHY_1049_DATA 0x00000033
+#define DDRSS_PHY_1050_DATA 0x0000000C
+#define DDRSS_PHY_1051_DATA 0x0000000C
+#define DDRSS_PHY_1052_DATA 0x00000033
+#define DDRSS_PHY_1053_DATA 0x00543210
+#define DDRSS_PHY_1054_DATA 0x003F0000
+#define DDRSS_PHY_1055_DATA 0x000F013F
+#define DDRSS_PHY_1056_DATA 0x20202003
+#define DDRSS_PHY_1057_DATA 0x00202020
+#define DDRSS_PHY_1058_DATA 0x20008008
+#define DDRSS_PHY_1059_DATA 0x00000810
+#define DDRSS_PHY_1060_DATA 0x00000F00
+#define DDRSS_PHY_1061_DATA 0x00000000
+#define DDRSS_PHY_1062_DATA 0x00000000
+#define DDRSS_PHY_1063_DATA 0x00000000
+#define DDRSS_PHY_1064_DATA 0x000305FF
+#define DDRSS_PHY_1065_DATA 0x00030000
+#define DDRSS_PHY_1066_DATA 0x00000300
+#define DDRSS_PHY_1067_DATA 0x00000300
+#define DDRSS_PHY_1068_DATA 0x00000300
+#define DDRSS_PHY_1069_DATA 0x00000300
+#define DDRSS_PHY_1070_DATA 0x00000300
+#define DDRSS_PHY_1071_DATA 0x42080010
+#define DDRSS_PHY_1072_DATA 0x0000803E
+#define DDRSS_PHY_1073_DATA 0x00000001
+#define DDRSS_PHY_1074_DATA 0x01000102
+#define DDRSS_PHY_1075_DATA 0x00008000
+#define DDRSS_PHY_1076_DATA 0x00000000
+#define DDRSS_PHY_1077_DATA 0x00000000
+#define DDRSS_PHY_1078_DATA 0x00000000
+#define DDRSS_PHY_1079_DATA 0x00000000
+#define DDRSS_PHY_1080_DATA 0x00000000
+#define DDRSS_PHY_1081_DATA 0x00000000
+#define DDRSS_PHY_1082_DATA 0x00000000
+#define DDRSS_PHY_1083_DATA 0x00000000
+#define DDRSS_PHY_1084_DATA 0x00000000
+#define DDRSS_PHY_1085_DATA 0x00000000
+#define DDRSS_PHY_1086_DATA 0x00000000
+#define DDRSS_PHY_1087_DATA 0x00000000
+#define DDRSS_PHY_1088_DATA 0x00000000
+#define DDRSS_PHY_1089_DATA 0x00000000
+#define DDRSS_PHY_1090_DATA 0x00000000
+#define DDRSS_PHY_1091_DATA 0x00000000
+#define DDRSS_PHY_1092_DATA 0x00000000
+#define DDRSS_PHY_1093_DATA 0x00000000
+#define DDRSS_PHY_1094_DATA 0x00000000
+#define DDRSS_PHY_1095_DATA 0x00000000
+#define DDRSS_PHY_1096_DATA 0x00000000
+#define DDRSS_PHY_1097_DATA 0x00000000
+#define DDRSS_PHY_1098_DATA 0x00000000
+#define DDRSS_PHY_1099_DATA 0x00000000
+#define DDRSS_PHY_1100_DATA 0x00000000
+#define DDRSS_PHY_1101_DATA 0x00000000
+#define DDRSS_PHY_1102_DATA 0x00000000
+#define DDRSS_PHY_1103_DATA 0x00000000
+#define DDRSS_PHY_1104_DATA 0x00000000
+#define DDRSS_PHY_1105_DATA 0x00000000
+#define DDRSS_PHY_1106_DATA 0x00000000
+#define DDRSS_PHY_1107_DATA 0x00000000
+#define DDRSS_PHY_1108_DATA 0x00000000
+#define DDRSS_PHY_1109_DATA 0x00000000
+#define DDRSS_PHY_1110_DATA 0x00000000
+#define DDRSS_PHY_1111_DATA 0x00000000
+#define DDRSS_PHY_1112_DATA 0x00000000
+#define DDRSS_PHY_1113_DATA 0x00000000
+#define DDRSS_PHY_1114_DATA 0x00000000
+#define DDRSS_PHY_1115_DATA 0x00000000
+#define DDRSS_PHY_1116_DATA 0x00000000
+#define DDRSS_PHY_1117_DATA 0x00000000
+#define DDRSS_PHY_1118_DATA 0x00000000
+#define DDRSS_PHY_1119_DATA 0x00000000
+#define DDRSS_PHY_1120_DATA 0x00000000
+#define DDRSS_PHY_1121_DATA 0x00000000
+#define DDRSS_PHY_1122_DATA 0x00000000
+#define DDRSS_PHY_1123_DATA 0x00000000
+#define DDRSS_PHY_1124_DATA 0x00000000
+#define DDRSS_PHY_1125_DATA 0x00000000
+#define DDRSS_PHY_1126_DATA 0x00000000
+#define DDRSS_PHY_1127_DATA 0x00000000
+#define DDRSS_PHY_1128_DATA 0x00000000
+#define DDRSS_PHY_1129_DATA 0x00000000
+#define DDRSS_PHY_1130_DATA 0x00000000
+#define DDRSS_PHY_1131_DATA 0x00000000
+#define DDRSS_PHY_1132_DATA 0x00000000
+#define DDRSS_PHY_1133_DATA 0x00000000
+#define DDRSS_PHY_1134_DATA 0x00000000
+#define DDRSS_PHY_1135_DATA 0x00000000
+#define DDRSS_PHY_1136_DATA 0x00000000
+#define DDRSS_PHY_1137_DATA 0x00000000
+#define DDRSS_PHY_1138_DATA 0x00000000
+#define DDRSS_PHY_1139_DATA 0x00000000
+#define DDRSS_PHY_1140_DATA 0x00000000
+#define DDRSS_PHY_1141_DATA 0x00000000
+#define DDRSS_PHY_1142_DATA 0x00000000
+#define DDRSS_PHY_1143_DATA 0x00000000
+#define DDRSS_PHY_1144_DATA 0x00000000
+#define DDRSS_PHY_1145_DATA 0x00000000
+#define DDRSS_PHY_1146_DATA 0x00000000
+#define DDRSS_PHY_1147_DATA 0x00000000
+#define DDRSS_PHY_1148_DATA 0x00000000
+#define DDRSS_PHY_1149_DATA 0x00000000
+#define DDRSS_PHY_1150_DATA 0x00000000
+#define DDRSS_PHY_1151_DATA 0x00000000
+#define DDRSS_PHY_1152_DATA 0x00000000
+#define DDRSS_PHY_1153_DATA 0x00000000
+#define DDRSS_PHY_1154_DATA 0x00000000
+#define DDRSS_PHY_1155_DATA 0x00000000
+#define DDRSS_PHY_1156_DATA 0x00000000
+#define DDRSS_PHY_1157_DATA 0x00000000
+#define DDRSS_PHY_1158_DATA 0x00000000
+#define DDRSS_PHY_1159_DATA 0x00000000
+#define DDRSS_PHY_1160_DATA 0x00000000
+#define DDRSS_PHY_1161_DATA 0x00000000
+#define DDRSS_PHY_1162_DATA 0x00000000
+#define DDRSS_PHY_1163_DATA 0x00000000
+#define DDRSS_PHY_1164_DATA 0x00000000
+#define DDRSS_PHY_1165_DATA 0x00000000
+#define DDRSS_PHY_1166_DATA 0x00000000
+#define DDRSS_PHY_1167_DATA 0x00000000
+#define DDRSS_PHY_1168_DATA 0x00000000
+#define DDRSS_PHY_1169_DATA 0x00000000
+#define DDRSS_PHY_1170_DATA 0x00000000
+#define DDRSS_PHY_1171_DATA 0x00000000
+#define DDRSS_PHY_1172_DATA 0x00000000
+#define DDRSS_PHY_1173_DATA 0x00000000
+#define DDRSS_PHY_1174_DATA 0x00000000
+#define DDRSS_PHY_1175_DATA 0x00000000
+#define DDRSS_PHY_1176_DATA 0x00000000
+#define DDRSS_PHY_1177_DATA 0x00000000
+#define DDRSS_PHY_1178_DATA 0x00000000
+#define DDRSS_PHY_1179_DATA 0x00000000
+#define DDRSS_PHY_1180_DATA 0x00000000
+#define DDRSS_PHY_1181_DATA 0x00000000
+#define DDRSS_PHY_1182_DATA 0x00000000
+#define DDRSS_PHY_1183_DATA 0x00000000
+#define DDRSS_PHY_1184_DATA 0x00000000
+#define DDRSS_PHY_1185_DATA 0x00000000
+#define DDRSS_PHY_1186_DATA 0x00000000
+#define DDRSS_PHY_1187_DATA 0x00000000
+#define DDRSS_PHY_1188_DATA 0x00000000
+#define DDRSS_PHY_1189_DATA 0x00000000
+#define DDRSS_PHY_1190_DATA 0x00000000
+#define DDRSS_PHY_1191_DATA 0x00000000
+#define DDRSS_PHY_1192_DATA 0x00000000
+#define DDRSS_PHY_1193_DATA 0x00000000
+#define DDRSS_PHY_1194_DATA 0x00000000
+#define DDRSS_PHY_1195_DATA 0x00000000
+#define DDRSS_PHY_1196_DATA 0x00000000
+#define DDRSS_PHY_1197_DATA 0x00000000
+#define DDRSS_PHY_1198_DATA 0x00000000
+#define DDRSS_PHY_1199_DATA 0x00000000
+#define DDRSS_PHY_1200_DATA 0x00000000
+#define DDRSS_PHY_1201_DATA 0x00000000
+#define DDRSS_PHY_1202_DATA 0x00000000
+#define DDRSS_PHY_1203_DATA 0x00000000
+#define DDRSS_PHY_1204_DATA 0x00000000
+#define DDRSS_PHY_1205_DATA 0x00000000
+#define DDRSS_PHY_1206_DATA 0x00000000
+#define DDRSS_PHY_1207_DATA 0x00000000
+#define DDRSS_PHY_1208_DATA 0x00000000
+#define DDRSS_PHY_1209_DATA 0x00000000
+#define DDRSS_PHY_1210_DATA 0x00000000
+#define DDRSS_PHY_1211_DATA 0x00000000
+#define DDRSS_PHY_1212_DATA 0x00000000
+#define DDRSS_PHY_1213_DATA 0x00000000
+#define DDRSS_PHY_1214_DATA 0x00000000
+#define DDRSS_PHY_1215_DATA 0x00000000
+#define DDRSS_PHY_1216_DATA 0x00000000
+#define DDRSS_PHY_1217_DATA 0x00000000
+#define DDRSS_PHY_1218_DATA 0x00000000
+#define DDRSS_PHY_1219_DATA 0x00000000
+#define DDRSS_PHY_1220_DATA 0x00000000
+#define DDRSS_PHY_1221_DATA 0x00000000
+#define DDRSS_PHY_1222_DATA 0x00000000
+#define DDRSS_PHY_1223_DATA 0x00000000
+#define DDRSS_PHY_1224_DATA 0x00000000
+#define DDRSS_PHY_1225_DATA 0x00000000
+#define DDRSS_PHY_1226_DATA 0x00000000
+#define DDRSS_PHY_1227_DATA 0x00000000
+#define DDRSS_PHY_1228_DATA 0x00000000
+#define DDRSS_PHY_1229_DATA 0x00000000
+#define DDRSS_PHY_1230_DATA 0x00000000
+#define DDRSS_PHY_1231_DATA 0x00000000
+#define DDRSS_PHY_1232_DATA 0x00000000
+#define DDRSS_PHY_1233_DATA 0x00000000
+#define DDRSS_PHY_1234_DATA 0x00000000
+#define DDRSS_PHY_1235_DATA 0x00000000
+#define DDRSS_PHY_1236_DATA 0x00000000
+#define DDRSS_PHY_1237_DATA 0x00000000
+#define DDRSS_PHY_1238_DATA 0x00000000
+#define DDRSS_PHY_1239_DATA 0x00000000
+#define DDRSS_PHY_1240_DATA 0x00000000
+#define DDRSS_PHY_1241_DATA 0x00000000
+#define DDRSS_PHY_1242_DATA 0x00000000
+#define DDRSS_PHY_1243_DATA 0x00000000
+#define DDRSS_PHY_1244_DATA 0x00000000
+#define DDRSS_PHY_1245_DATA 0x00000000
+#define DDRSS_PHY_1246_DATA 0x00000000
+#define DDRSS_PHY_1247_DATA 0x00000000
+#define DDRSS_PHY_1248_DATA 0x00000000
+#define DDRSS_PHY_1249_DATA 0x00000000
+#define DDRSS_PHY_1250_DATA 0x00000000
+#define DDRSS_PHY_1251_DATA 0x00000000
+#define DDRSS_PHY_1252_DATA 0x00000000
+#define DDRSS_PHY_1253_DATA 0x00000000
+#define DDRSS_PHY_1254_DATA 0x00000000
+#define DDRSS_PHY_1255_DATA 0x00000000
+#define DDRSS_PHY_1256_DATA 0x00000000
+#define DDRSS_PHY_1257_DATA 0x00000000
+#define DDRSS_PHY_1258_DATA 0x00000000
+#define DDRSS_PHY_1259_DATA 0x00000000
+#define DDRSS_PHY_1260_DATA 0x00000000
+#define DDRSS_PHY_1261_DATA 0x00000000
+#define DDRSS_PHY_1262_DATA 0x00000000
+#define DDRSS_PHY_1263_DATA 0x00000000
+#define DDRSS_PHY_1264_DATA 0x00000000
+#define DDRSS_PHY_1265_DATA 0x00000000
+#define DDRSS_PHY_1266_DATA 0x00000000
+#define DDRSS_PHY_1267_DATA 0x00000000
+#define DDRSS_PHY_1268_DATA 0x00000000
+#define DDRSS_PHY_1269_DATA 0x00000000
+#define DDRSS_PHY_1270_DATA 0x00000000
+#define DDRSS_PHY_1271_DATA 0x00000000
+#define DDRSS_PHY_1272_DATA 0x00000000
+#define DDRSS_PHY_1273_DATA 0x00000000
+#define DDRSS_PHY_1274_DATA 0x00000000
+#define DDRSS_PHY_1275_DATA 0x00000000
+#define DDRSS_PHY_1276_DATA 0x00000000
+#define DDRSS_PHY_1277_DATA 0x00000000
+#define DDRSS_PHY_1278_DATA 0x00000000
+#define DDRSS_PHY_1279_DATA 0x00000000
+#define DDRSS_PHY_1280_DATA 0x00000000
+#define DDRSS_PHY_1281_DATA 0x00010100
+#define DDRSS_PHY_1282_DATA 0x00000000
+#define DDRSS_PHY_1283_DATA 0x00000000
+#define DDRSS_PHY_1284_DATA 0x00050000
+#define DDRSS_PHY_1285_DATA 0x04000000
+#define DDRSS_PHY_1286_DATA 0x00000055
+#define DDRSS_PHY_1287_DATA 0x00000000
+#define DDRSS_PHY_1288_DATA 0x00000000
+#define DDRSS_PHY_1289_DATA 0x00000000
+#define DDRSS_PHY_1290_DATA 0x00000000
+#define DDRSS_PHY_1291_DATA 0x00002001
+#define DDRSS_PHY_1292_DATA 0x0000400F
+#define DDRSS_PHY_1293_DATA 0x50020028
+#define DDRSS_PHY_1294_DATA 0x01010000
+#define DDRSS_PHY_1295_DATA 0x80080001
+#define DDRSS_PHY_1296_DATA 0x10200000
+#define DDRSS_PHY_1297_DATA 0x00000008
+#define DDRSS_PHY_1298_DATA 0x00000000
+#define DDRSS_PHY_1299_DATA 0x01090E00
+#define DDRSS_PHY_1300_DATA 0x00040101
+#define DDRSS_PHY_1301_DATA 0x0000010F
+#define DDRSS_PHY_1302_DATA 0x00000000
+#define DDRSS_PHY_1303_DATA 0x0000FFFF
+#define DDRSS_PHY_1304_DATA 0x00000000
+#define DDRSS_PHY_1305_DATA 0x01010000
+#define DDRSS_PHY_1306_DATA 0x01080402
+#define DDRSS_PHY_1307_DATA 0x01200F02
+#define DDRSS_PHY_1308_DATA 0x00194280
+#define DDRSS_PHY_1309_DATA 0x00000004
+#define DDRSS_PHY_1310_DATA 0x00050000
+#define DDRSS_PHY_1311_DATA 0x00000000
+#define DDRSS_PHY_1312_DATA 0x00000000
+#define DDRSS_PHY_1313_DATA 0x00000000
+#define DDRSS_PHY_1314_DATA 0x00000000
+#define DDRSS_PHY_1315_DATA 0x00000000
+#define DDRSS_PHY_1316_DATA 0x00000000
+#define DDRSS_PHY_1317_DATA 0x01000000
+#define DDRSS_PHY_1318_DATA 0x00000705
+#define DDRSS_PHY_1319_DATA 0x00000054
+#define DDRSS_PHY_1320_DATA 0x00030820
+#define DDRSS_PHY_1321_DATA 0x00010820
+#define DDRSS_PHY_1322_DATA 0x00010820
+#define DDRSS_PHY_1323_DATA 0x00010820
+#define DDRSS_PHY_1324_DATA 0x00010820
+#define DDRSS_PHY_1325_DATA 0x00010820
+#define DDRSS_PHY_1326_DATA 0x00010820
+#define DDRSS_PHY_1327_DATA 0x00010820
+#define DDRSS_PHY_1328_DATA 0x00010820
+#define DDRSS_PHY_1329_DATA 0x00000000
+#define DDRSS_PHY_1330_DATA 0x00000074
+#define DDRSS_PHY_1331_DATA 0x00000400
+#define DDRSS_PHY_1332_DATA 0x00000108
+#define DDRSS_PHY_1333_DATA 0x00000000
+#define DDRSS_PHY_1334_DATA 0x00000000
+#define DDRSS_PHY_1335_DATA 0x00000000
+#define DDRSS_PHY_1336_DATA 0x00000000
+#define DDRSS_PHY_1337_DATA 0x00000000
+#define DDRSS_PHY_1338_DATA 0x03000000
+#define DDRSS_PHY_1339_DATA 0x00000000
+#define DDRSS_PHY_1340_DATA 0x00000000
+#define DDRSS_PHY_1341_DATA 0x00000000
+#define DDRSS_PHY_1342_DATA 0x04102006
+#define DDRSS_PHY_1343_DATA 0x00041020
+#define DDRSS_PHY_1344_DATA 0x01C98C98
+#define DDRSS_PHY_1345_DATA 0x3F400000
+#define DDRSS_PHY_1346_DATA 0x3F3F1F3F
+#define DDRSS_PHY_1347_DATA 0x0000001F
+#define DDRSS_PHY_1348_DATA 0x00000000
+#define DDRSS_PHY_1349_DATA 0x00000000
+#define DDRSS_PHY_1350_DATA 0x00000000
+#define DDRSS_PHY_1351_DATA 0x00010000
+#define DDRSS_PHY_1352_DATA 0x00000000
+#define DDRSS_PHY_1353_DATA 0x00000000
+#define DDRSS_PHY_1354_DATA 0x00000000
+#define DDRSS_PHY_1355_DATA 0x00000000
+#define DDRSS_PHY_1356_DATA 0x76543210
+#define DDRSS_PHY_1357_DATA 0x00010198
+#define DDRSS_PHY_1358_DATA 0x00000000
+#define DDRSS_PHY_1359_DATA 0x00000000
+#define DDRSS_PHY_1360_DATA 0x00000000
+#define DDRSS_PHY_1361_DATA 0x00040700
+#define DDRSS_PHY_1362_DATA 0x00000000
+#define DDRSS_PHY_1363_DATA 0x00000000
+#define DDRSS_PHY_1364_DATA 0x00000000
+#define DDRSS_PHY_1365_DATA 0x00000000
+#define DDRSS_PHY_1366_DATA 0x00000000
+#define DDRSS_PHY_1367_DATA 0x00000002
+#define DDRSS_PHY_1368_DATA 0x00000000
+#define DDRSS_PHY_1369_DATA 0x00000000
+#define DDRSS_PHY_1370_DATA 0x00000000
+#define DDRSS_PHY_1371_DATA 0x00000000
+#define DDRSS_PHY_1372_DATA 0x00000000
+#define DDRSS_PHY_1373_DATA 0x00000000
+#define DDRSS_PHY_1374_DATA 0x00080000
+#define DDRSS_PHY_1375_DATA 0x000007FF
+#define DDRSS_PHY_1376_DATA 0x00000000
+#define DDRSS_PHY_1377_DATA 0x00000000
+#define DDRSS_PHY_1378_DATA 0x00000000
+#define DDRSS_PHY_1379_DATA 0x00000000
+#define DDRSS_PHY_1380_DATA 0x00000000
+#define DDRSS_PHY_1381_DATA 0x00000000
+#define DDRSS_PHY_1382_DATA 0x000FFFFF
+#define DDRSS_PHY_1383_DATA 0x000FFFFF
+#define DDRSS_PHY_1384_DATA 0x0000FFFF
+#define DDRSS_PHY_1385_DATA 0xFFFFFFF0
+#define DDRSS_PHY_1386_DATA 0x030FFFFF
+#define DDRSS_PHY_1387_DATA 0x01FFFFFF
+#define DDRSS_PHY_1388_DATA 0x0000FFFF
+#define DDRSS_PHY_1389_DATA 0x00000000
+#define DDRSS_PHY_1390_DATA 0x00000000
+#define DDRSS_PHY_1391_DATA 0x00000000
+#define DDRSS_PHY_1392_DATA 0x00000000
+#define DDRSS_PHY_1393_DATA 0x0001F7C0
+#define DDRSS_PHY_1394_DATA 0x00000003
+#define DDRSS_PHY_1395_DATA 0x00000000
+#define DDRSS_PHY_1396_DATA 0x00001142
+#define DDRSS_PHY_1397_DATA 0x010207AB
+#define DDRSS_PHY_1398_DATA 0x01000080
+#define DDRSS_PHY_1399_DATA 0x03900390
+#define DDRSS_PHY_1400_DATA 0x03900390
+#define DDRSS_PHY_1401_DATA 0x00000390
+#define DDRSS_PHY_1402_DATA 0x00000390
+#define DDRSS_PHY_1403_DATA 0x00000390
+#define DDRSS_PHY_1404_DATA 0x00000390
+#define DDRSS_PHY_1405_DATA 0x00000005
+#define DDRSS_PHY_1406_DATA 0x01813FFF
+#define DDRSS_PHY_1407_DATA 0x000000FF
+#define DDRSS_PHY_1408_DATA 0x0C000DFF
+#define DDRSS_PHY_1409_DATA 0x30000DFF
+#define DDRSS_PHY_1410_DATA 0x3F0DFF11
+#define DDRSS_PHY_1411_DATA 0x000100F0
+#define DDRSS_PHY_1412_DATA 0x780DFFFF
+#define DDRSS_PHY_1413_DATA 0x00007E31
+#define DDRSS_PHY_1414_DATA 0x000CBF11
+#define DDRSS_PHY_1415_DATA 0x01FF0010
+#define DDRSS_PHY_1416_DATA 0x000CBF11
+#define DDRSS_PHY_1417_DATA 0x01FF0010
+#define DDRSS_PHY_1418_DATA 0x3F0DFF11
+#define DDRSS_PHY_1419_DATA 0x01FF00F0
+#define DDRSS_PHY_1420_DATA 0x3F0DFF11
+#define DDRSS_PHY_1421_DATA 0x01FF00F0
+#define DDRSS_PHY_1422_DATA 0x20040006
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-ddr.dtsi b/roms/u-boot/arch/arm/dts/k3-j721e-ddr.dtsi
new file mode 100644
index 000000000..21d63802a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-ddr.dtsi
@@ -0,0 +1,2212 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+*/
+
+/ {
+	memorycontroller: memorycontroller@0298e000 {
+		compatible = "ti,j721e-ddrss";
+		reg = <0x0 0x02990000 0x0 0x4000>,
+		      <0x0 0x0114000 0x0 0x100>;
+		reg-names = "cfg", "ctrl_mmr_lp4";
+		power-domains = <&k3_pds 47 TI_SCI_PD_SHARED>,
+			<&k3_pds 90 TI_SCI_PD_SHARED>;
+		clocks = <&k3_clks 47 2>, <&k3_clks 30 9>;
+		ti,ddr-freq1 = <DDRSS_PLL_FREQUENCY_1>;
+		ti,ddr-freq2 = <DDRSS_PLL_FREQUENCY_2>;
+		ti,ddr-fhs-cnt = <DDRSS_PLL_FHS_CNT>;
+
+		u-boot,dm-spl;
+
+		ti,ctl-data = <
+			DDRSS_CTL_00_DATA
+			DDRSS_CTL_01_DATA
+			DDRSS_CTL_02_DATA
+			DDRSS_CTL_03_DATA
+			DDRSS_CTL_04_DATA
+			DDRSS_CTL_05_DATA
+			DDRSS_CTL_06_DATA
+			DDRSS_CTL_07_DATA
+			DDRSS_CTL_08_DATA
+			DDRSS_CTL_09_DATA
+			DDRSS_CTL_10_DATA
+			DDRSS_CTL_11_DATA
+			DDRSS_CTL_12_DATA
+			DDRSS_CTL_13_DATA
+			DDRSS_CTL_14_DATA
+			DDRSS_CTL_15_DATA
+			DDRSS_CTL_16_DATA
+			DDRSS_CTL_17_DATA
+			DDRSS_CTL_18_DATA
+			DDRSS_CTL_19_DATA
+			DDRSS_CTL_20_DATA
+			DDRSS_CTL_21_DATA
+			DDRSS_CTL_22_DATA
+			DDRSS_CTL_23_DATA
+			DDRSS_CTL_24_DATA
+			DDRSS_CTL_25_DATA
+			DDRSS_CTL_26_DATA
+			DDRSS_CTL_27_DATA
+			DDRSS_CTL_28_DATA
+			DDRSS_CTL_29_DATA
+			DDRSS_CTL_30_DATA
+			DDRSS_CTL_31_DATA
+			DDRSS_CTL_32_DATA
+			DDRSS_CTL_33_DATA
+			DDRSS_CTL_34_DATA
+			DDRSS_CTL_35_DATA
+			DDRSS_CTL_36_DATA
+			DDRSS_CTL_37_DATA
+			DDRSS_CTL_38_DATA
+			DDRSS_CTL_39_DATA
+			DDRSS_CTL_40_DATA
+			DDRSS_CTL_41_DATA
+			DDRSS_CTL_42_DATA
+			DDRSS_CTL_43_DATA
+			DDRSS_CTL_44_DATA
+			DDRSS_CTL_45_DATA
+			DDRSS_CTL_46_DATA
+			DDRSS_CTL_47_DATA
+			DDRSS_CTL_48_DATA
+			DDRSS_CTL_49_DATA
+			DDRSS_CTL_50_DATA
+			DDRSS_CTL_51_DATA
+			DDRSS_CTL_52_DATA
+			DDRSS_CTL_53_DATA
+			DDRSS_CTL_54_DATA
+			DDRSS_CTL_55_DATA
+			DDRSS_CTL_56_DATA
+			DDRSS_CTL_57_DATA
+			DDRSS_CTL_58_DATA
+			DDRSS_CTL_59_DATA
+			DDRSS_CTL_60_DATA
+			DDRSS_CTL_61_DATA
+			DDRSS_CTL_62_DATA
+			DDRSS_CTL_63_DATA
+			DDRSS_CTL_64_DATA
+			DDRSS_CTL_65_DATA
+			DDRSS_CTL_66_DATA
+			DDRSS_CTL_67_DATA
+			DDRSS_CTL_68_DATA
+			DDRSS_CTL_69_DATA
+			DDRSS_CTL_70_DATA
+			DDRSS_CTL_71_DATA
+			DDRSS_CTL_72_DATA
+			DDRSS_CTL_73_DATA
+			DDRSS_CTL_74_DATA
+			DDRSS_CTL_75_DATA
+			DDRSS_CTL_76_DATA
+			DDRSS_CTL_77_DATA
+			DDRSS_CTL_78_DATA
+			DDRSS_CTL_79_DATA
+			DDRSS_CTL_80_DATA
+			DDRSS_CTL_81_DATA
+			DDRSS_CTL_82_DATA
+			DDRSS_CTL_83_DATA
+			DDRSS_CTL_84_DATA
+			DDRSS_CTL_85_DATA
+			DDRSS_CTL_86_DATA
+			DDRSS_CTL_87_DATA
+			DDRSS_CTL_88_DATA
+			DDRSS_CTL_89_DATA
+			DDRSS_CTL_90_DATA
+			DDRSS_CTL_91_DATA
+			DDRSS_CTL_92_DATA
+			DDRSS_CTL_93_DATA
+			DDRSS_CTL_94_DATA
+			DDRSS_CTL_95_DATA
+			DDRSS_CTL_96_DATA
+			DDRSS_CTL_97_DATA
+			DDRSS_CTL_98_DATA
+			DDRSS_CTL_99_DATA
+			DDRSS_CTL_100_DATA
+			DDRSS_CTL_101_DATA
+			DDRSS_CTL_102_DATA
+			DDRSS_CTL_103_DATA
+			DDRSS_CTL_104_DATA
+			DDRSS_CTL_105_DATA
+			DDRSS_CTL_106_DATA
+			DDRSS_CTL_107_DATA
+			DDRSS_CTL_108_DATA
+			DDRSS_CTL_109_DATA
+			DDRSS_CTL_110_DATA
+			DDRSS_CTL_111_DATA
+			DDRSS_CTL_112_DATA
+			DDRSS_CTL_113_DATA
+			DDRSS_CTL_114_DATA
+			DDRSS_CTL_115_DATA
+			DDRSS_CTL_116_DATA
+			DDRSS_CTL_117_DATA
+			DDRSS_CTL_118_DATA
+			DDRSS_CTL_119_DATA
+			DDRSS_CTL_120_DATA
+			DDRSS_CTL_121_DATA
+			DDRSS_CTL_122_DATA
+			DDRSS_CTL_123_DATA
+			DDRSS_CTL_124_DATA
+			DDRSS_CTL_125_DATA
+			DDRSS_CTL_126_DATA
+			DDRSS_CTL_127_DATA
+			DDRSS_CTL_128_DATA
+			DDRSS_CTL_129_DATA
+			DDRSS_CTL_130_DATA
+			DDRSS_CTL_131_DATA
+			DDRSS_CTL_132_DATA
+			DDRSS_CTL_133_DATA
+			DDRSS_CTL_134_DATA
+			DDRSS_CTL_135_DATA
+			DDRSS_CTL_136_DATA
+			DDRSS_CTL_137_DATA
+			DDRSS_CTL_138_DATA
+			DDRSS_CTL_139_DATA
+			DDRSS_CTL_140_DATA
+			DDRSS_CTL_141_DATA
+			DDRSS_CTL_142_DATA
+			DDRSS_CTL_143_DATA
+			DDRSS_CTL_144_DATA
+			DDRSS_CTL_145_DATA
+			DDRSS_CTL_146_DATA
+			DDRSS_CTL_147_DATA
+			DDRSS_CTL_148_DATA
+			DDRSS_CTL_149_DATA
+			DDRSS_CTL_150_DATA
+			DDRSS_CTL_151_DATA
+			DDRSS_CTL_152_DATA
+			DDRSS_CTL_153_DATA
+			DDRSS_CTL_154_DATA
+			DDRSS_CTL_155_DATA
+			DDRSS_CTL_156_DATA
+			DDRSS_CTL_157_DATA
+			DDRSS_CTL_158_DATA
+			DDRSS_CTL_159_DATA
+			DDRSS_CTL_160_DATA
+			DDRSS_CTL_161_DATA
+			DDRSS_CTL_162_DATA
+			DDRSS_CTL_163_DATA
+			DDRSS_CTL_164_DATA
+			DDRSS_CTL_165_DATA
+			DDRSS_CTL_166_DATA
+			DDRSS_CTL_167_DATA
+			DDRSS_CTL_168_DATA
+			DDRSS_CTL_169_DATA
+			DDRSS_CTL_170_DATA
+			DDRSS_CTL_171_DATA
+			DDRSS_CTL_172_DATA
+			DDRSS_CTL_173_DATA
+			DDRSS_CTL_174_DATA
+			DDRSS_CTL_175_DATA
+			DDRSS_CTL_176_DATA
+			DDRSS_CTL_177_DATA
+			DDRSS_CTL_178_DATA
+			DDRSS_CTL_179_DATA
+			DDRSS_CTL_180_DATA
+			DDRSS_CTL_181_DATA
+			DDRSS_CTL_182_DATA
+			DDRSS_CTL_183_DATA
+			DDRSS_CTL_184_DATA
+			DDRSS_CTL_185_DATA
+			DDRSS_CTL_186_DATA
+			DDRSS_CTL_187_DATA
+			DDRSS_CTL_188_DATA
+			DDRSS_CTL_189_DATA
+			DDRSS_CTL_190_DATA
+			DDRSS_CTL_191_DATA
+			DDRSS_CTL_192_DATA
+			DDRSS_CTL_193_DATA
+			DDRSS_CTL_194_DATA
+			DDRSS_CTL_195_DATA
+			DDRSS_CTL_196_DATA
+			DDRSS_CTL_197_DATA
+			DDRSS_CTL_198_DATA
+			DDRSS_CTL_199_DATA
+			DDRSS_CTL_200_DATA
+			DDRSS_CTL_201_DATA
+			DDRSS_CTL_202_DATA
+			DDRSS_CTL_203_DATA
+			DDRSS_CTL_204_DATA
+			DDRSS_CTL_205_DATA
+			DDRSS_CTL_206_DATA
+			DDRSS_CTL_207_DATA
+			DDRSS_CTL_208_DATA
+			DDRSS_CTL_209_DATA
+			DDRSS_CTL_210_DATA
+			DDRSS_CTL_211_DATA
+			DDRSS_CTL_212_DATA
+			DDRSS_CTL_213_DATA
+			DDRSS_CTL_214_DATA
+			DDRSS_CTL_215_DATA
+			DDRSS_CTL_216_DATA
+			DDRSS_CTL_217_DATA
+			DDRSS_CTL_218_DATA
+			DDRSS_CTL_219_DATA
+			DDRSS_CTL_220_DATA
+			DDRSS_CTL_221_DATA
+			DDRSS_CTL_222_DATA
+			DDRSS_CTL_223_DATA
+			DDRSS_CTL_224_DATA
+			DDRSS_CTL_225_DATA
+			DDRSS_CTL_226_DATA
+			DDRSS_CTL_227_DATA
+			DDRSS_CTL_228_DATA
+			DDRSS_CTL_229_DATA
+			DDRSS_CTL_230_DATA
+			DDRSS_CTL_231_DATA
+			DDRSS_CTL_232_DATA
+			DDRSS_CTL_233_DATA
+			DDRSS_CTL_234_DATA
+			DDRSS_CTL_235_DATA
+			DDRSS_CTL_236_DATA
+			DDRSS_CTL_237_DATA
+			DDRSS_CTL_238_DATA
+			DDRSS_CTL_239_DATA
+			DDRSS_CTL_240_DATA
+			DDRSS_CTL_241_DATA
+			DDRSS_CTL_242_DATA
+			DDRSS_CTL_243_DATA
+			DDRSS_CTL_244_DATA
+			DDRSS_CTL_245_DATA
+			DDRSS_CTL_246_DATA
+			DDRSS_CTL_247_DATA
+			DDRSS_CTL_248_DATA
+			DDRSS_CTL_249_DATA
+			DDRSS_CTL_250_DATA
+			DDRSS_CTL_251_DATA
+			DDRSS_CTL_252_DATA
+			DDRSS_CTL_253_DATA
+			DDRSS_CTL_254_DATA
+			DDRSS_CTL_255_DATA
+			DDRSS_CTL_256_DATA
+			DDRSS_CTL_257_DATA
+			DDRSS_CTL_258_DATA
+			DDRSS_CTL_259_DATA
+			DDRSS_CTL_260_DATA
+			DDRSS_CTL_261_DATA
+			DDRSS_CTL_262_DATA
+			DDRSS_CTL_263_DATA
+			DDRSS_CTL_264_DATA
+			DDRSS_CTL_265_DATA
+			DDRSS_CTL_266_DATA
+			DDRSS_CTL_267_DATA
+			DDRSS_CTL_268_DATA
+			DDRSS_CTL_269_DATA
+			DDRSS_CTL_270_DATA
+			DDRSS_CTL_271_DATA
+			DDRSS_CTL_272_DATA
+			DDRSS_CTL_273_DATA
+			DDRSS_CTL_274_DATA
+			DDRSS_CTL_275_DATA
+			DDRSS_CTL_276_DATA
+			DDRSS_CTL_277_DATA
+			DDRSS_CTL_278_DATA
+			DDRSS_CTL_279_DATA
+			DDRSS_CTL_280_DATA
+			DDRSS_CTL_281_DATA
+			DDRSS_CTL_282_DATA
+			DDRSS_CTL_283_DATA
+			DDRSS_CTL_284_DATA
+			DDRSS_CTL_285_DATA
+			DDRSS_CTL_286_DATA
+			DDRSS_CTL_287_DATA
+			DDRSS_CTL_288_DATA
+			DDRSS_CTL_289_DATA
+			DDRSS_CTL_290_DATA
+			DDRSS_CTL_291_DATA
+			DDRSS_CTL_292_DATA
+			DDRSS_CTL_293_DATA
+			DDRSS_CTL_294_DATA
+			DDRSS_CTL_295_DATA
+			DDRSS_CTL_296_DATA
+			DDRSS_CTL_297_DATA
+			DDRSS_CTL_298_DATA
+			DDRSS_CTL_299_DATA
+			DDRSS_CTL_300_DATA
+			DDRSS_CTL_301_DATA
+			DDRSS_CTL_302_DATA
+			DDRSS_CTL_303_DATA
+			DDRSS_CTL_304_DATA
+			DDRSS_CTL_305_DATA
+			DDRSS_CTL_306_DATA
+			DDRSS_CTL_307_DATA
+			DDRSS_CTL_308_DATA
+			DDRSS_CTL_309_DATA
+			DDRSS_CTL_310_DATA
+			DDRSS_CTL_311_DATA
+			DDRSS_CTL_312_DATA
+			DDRSS_CTL_313_DATA
+			DDRSS_CTL_314_DATA
+			DDRSS_CTL_315_DATA
+			DDRSS_CTL_316_DATA
+			DDRSS_CTL_317_DATA
+			DDRSS_CTL_318_DATA
+			DDRSS_CTL_319_DATA
+			DDRSS_CTL_320_DATA
+			DDRSS_CTL_321_DATA
+			DDRSS_CTL_322_DATA
+			DDRSS_CTL_323_DATA
+			DDRSS_CTL_324_DATA
+			DDRSS_CTL_325_DATA
+			DDRSS_CTL_326_DATA
+			DDRSS_CTL_327_DATA
+			DDRSS_CTL_328_DATA
+			DDRSS_CTL_329_DATA
+			DDRSS_CTL_330_DATA
+			DDRSS_CTL_331_DATA
+			DDRSS_CTL_332_DATA
+			DDRSS_CTL_333_DATA
+			DDRSS_CTL_334_DATA
+			DDRSS_CTL_335_DATA
+			DDRSS_CTL_336_DATA
+			DDRSS_CTL_337_DATA
+			DDRSS_CTL_338_DATA
+			DDRSS_CTL_339_DATA
+			DDRSS_CTL_340_DATA
+			DDRSS_CTL_341_DATA
+			DDRSS_CTL_342_DATA
+			DDRSS_CTL_343_DATA
+			DDRSS_CTL_344_DATA
+			DDRSS_CTL_345_DATA
+			DDRSS_CTL_346_DATA
+			DDRSS_CTL_347_DATA
+			DDRSS_CTL_348_DATA
+			DDRSS_CTL_349_DATA
+			DDRSS_CTL_350_DATA
+			DDRSS_CTL_351_DATA
+			DDRSS_CTL_352_DATA
+			DDRSS_CTL_353_DATA
+			DDRSS_CTL_354_DATA
+			DDRSS_CTL_355_DATA
+			DDRSS_CTL_356_DATA
+			DDRSS_CTL_357_DATA
+			DDRSS_CTL_358_DATA
+			DDRSS_CTL_359_DATA
+			DDRSS_CTL_360_DATA
+			DDRSS_CTL_361_DATA
+			DDRSS_CTL_362_DATA
+			DDRSS_CTL_363_DATA
+			DDRSS_CTL_364_DATA
+			DDRSS_CTL_365_DATA
+			DDRSS_CTL_366_DATA
+			DDRSS_CTL_367_DATA
+			DDRSS_CTL_368_DATA
+			DDRSS_CTL_369_DATA
+			DDRSS_CTL_370_DATA
+			DDRSS_CTL_371_DATA
+			DDRSS_CTL_372_DATA
+			DDRSS_CTL_373_DATA
+			DDRSS_CTL_374_DATA
+			DDRSS_CTL_375_DATA
+			DDRSS_CTL_376_DATA
+			DDRSS_CTL_377_DATA
+			DDRSS_CTL_378_DATA
+			DDRSS_CTL_379_DATA
+			DDRSS_CTL_380_DATA
+			DDRSS_CTL_381_DATA
+			DDRSS_CTL_382_DATA
+			DDRSS_CTL_383_DATA
+			DDRSS_CTL_384_DATA
+			DDRSS_CTL_385_DATA
+			DDRSS_CTL_386_DATA
+			DDRSS_CTL_387_DATA
+			DDRSS_CTL_388_DATA
+			DDRSS_CTL_389_DATA
+			DDRSS_CTL_390_DATA
+			DDRSS_CTL_391_DATA
+			DDRSS_CTL_392_DATA
+			DDRSS_CTL_393_DATA
+			DDRSS_CTL_394_DATA
+			DDRSS_CTL_395_DATA
+			DDRSS_CTL_396_DATA
+			DDRSS_CTL_397_DATA
+			DDRSS_CTL_398_DATA
+			DDRSS_CTL_399_DATA
+			DDRSS_CTL_400_DATA
+			DDRSS_CTL_401_DATA
+			DDRSS_CTL_402_DATA
+			DDRSS_CTL_403_DATA
+			DDRSS_CTL_404_DATA
+			DDRSS_CTL_405_DATA
+			DDRSS_CTL_406_DATA
+			DDRSS_CTL_407_DATA
+			DDRSS_CTL_408_DATA
+			DDRSS_CTL_409_DATA
+			DDRSS_CTL_410_DATA
+			DDRSS_CTL_411_DATA
+			DDRSS_CTL_412_DATA
+			DDRSS_CTL_413_DATA
+			DDRSS_CTL_414_DATA
+			DDRSS_CTL_415_DATA
+			DDRSS_CTL_416_DATA
+			DDRSS_CTL_417_DATA
+			DDRSS_CTL_418_DATA
+			DDRSS_CTL_419_DATA
+			DDRSS_CTL_420_DATA
+			DDRSS_CTL_421_DATA
+			DDRSS_CTL_422_DATA
+			DDRSS_CTL_423_DATA
+			DDRSS_CTL_424_DATA
+			DDRSS_CTL_425_DATA
+			DDRSS_CTL_426_DATA
+			DDRSS_CTL_427_DATA
+			DDRSS_CTL_428_DATA
+			DDRSS_CTL_429_DATA
+			DDRSS_CTL_430_DATA
+			DDRSS_CTL_431_DATA
+			DDRSS_CTL_432_DATA
+			DDRSS_CTL_433_DATA
+			DDRSS_CTL_434_DATA
+			DDRSS_CTL_435_DATA
+			DDRSS_CTL_436_DATA
+			DDRSS_CTL_437_DATA
+			DDRSS_CTL_438_DATA
+			DDRSS_CTL_439_DATA
+			DDRSS_CTL_440_DATA
+			DDRSS_CTL_441_DATA
+			DDRSS_CTL_442_DATA
+			DDRSS_CTL_443_DATA
+			DDRSS_CTL_444_DATA
+			DDRSS_CTL_445_DATA
+			DDRSS_CTL_446_DATA
+			DDRSS_CTL_447_DATA
+			DDRSS_CTL_448_DATA
+			DDRSS_CTL_449_DATA
+			DDRSS_CTL_450_DATA
+			DDRSS_CTL_451_DATA
+			DDRSS_CTL_452_DATA
+			DDRSS_CTL_453_DATA
+			DDRSS_CTL_454_DATA
+			DDRSS_CTL_455_DATA
+			DDRSS_CTL_456_DATA
+			DDRSS_CTL_457_DATA
+			DDRSS_CTL_458_DATA
+		>;
+
+		ti,pi-data = <
+			DDRSS_PI_00_DATA
+			DDRSS_PI_01_DATA
+			DDRSS_PI_02_DATA
+			DDRSS_PI_03_DATA
+			DDRSS_PI_04_DATA
+			DDRSS_PI_05_DATA
+			DDRSS_PI_06_DATA
+			DDRSS_PI_07_DATA
+			DDRSS_PI_08_DATA
+			DDRSS_PI_09_DATA
+			DDRSS_PI_10_DATA
+			DDRSS_PI_11_DATA
+			DDRSS_PI_12_DATA
+			DDRSS_PI_13_DATA
+			DDRSS_PI_14_DATA
+			DDRSS_PI_15_DATA
+			DDRSS_PI_16_DATA
+			DDRSS_PI_17_DATA
+			DDRSS_PI_18_DATA
+			DDRSS_PI_19_DATA
+			DDRSS_PI_20_DATA
+			DDRSS_PI_21_DATA
+			DDRSS_PI_22_DATA
+			DDRSS_PI_23_DATA
+			DDRSS_PI_24_DATA
+			DDRSS_PI_25_DATA
+			DDRSS_PI_26_DATA
+			DDRSS_PI_27_DATA
+			DDRSS_PI_28_DATA
+			DDRSS_PI_29_DATA
+			DDRSS_PI_30_DATA
+			DDRSS_PI_31_DATA
+			DDRSS_PI_32_DATA
+			DDRSS_PI_33_DATA
+			DDRSS_PI_34_DATA
+			DDRSS_PI_35_DATA
+			DDRSS_PI_36_DATA
+			DDRSS_PI_37_DATA
+			DDRSS_PI_38_DATA
+			DDRSS_PI_39_DATA
+			DDRSS_PI_40_DATA
+			DDRSS_PI_41_DATA
+			DDRSS_PI_42_DATA
+			DDRSS_PI_43_DATA
+			DDRSS_PI_44_DATA
+			DDRSS_PI_45_DATA
+			DDRSS_PI_46_DATA
+			DDRSS_PI_47_DATA
+			DDRSS_PI_48_DATA
+			DDRSS_PI_49_DATA
+			DDRSS_PI_50_DATA
+			DDRSS_PI_51_DATA
+			DDRSS_PI_52_DATA
+			DDRSS_PI_53_DATA
+			DDRSS_PI_54_DATA
+			DDRSS_PI_55_DATA
+			DDRSS_PI_56_DATA
+			DDRSS_PI_57_DATA
+			DDRSS_PI_58_DATA
+			DDRSS_PI_59_DATA
+			DDRSS_PI_60_DATA
+			DDRSS_PI_61_DATA
+			DDRSS_PI_62_DATA
+			DDRSS_PI_63_DATA
+			DDRSS_PI_64_DATA
+			DDRSS_PI_65_DATA
+			DDRSS_PI_66_DATA
+			DDRSS_PI_67_DATA
+			DDRSS_PI_68_DATA
+			DDRSS_PI_69_DATA
+			DDRSS_PI_70_DATA
+			DDRSS_PI_71_DATA
+			DDRSS_PI_72_DATA
+			DDRSS_PI_73_DATA
+			DDRSS_PI_74_DATA
+			DDRSS_PI_75_DATA
+			DDRSS_PI_76_DATA
+			DDRSS_PI_77_DATA
+			DDRSS_PI_78_DATA
+			DDRSS_PI_79_DATA
+			DDRSS_PI_80_DATA
+			DDRSS_PI_81_DATA
+			DDRSS_PI_82_DATA
+			DDRSS_PI_83_DATA
+			DDRSS_PI_84_DATA
+			DDRSS_PI_85_DATA
+			DDRSS_PI_86_DATA
+			DDRSS_PI_87_DATA
+			DDRSS_PI_88_DATA
+			DDRSS_PI_89_DATA
+			DDRSS_PI_90_DATA
+			DDRSS_PI_91_DATA
+			DDRSS_PI_92_DATA
+			DDRSS_PI_93_DATA
+			DDRSS_PI_94_DATA
+			DDRSS_PI_95_DATA
+			DDRSS_PI_96_DATA
+			DDRSS_PI_97_DATA
+			DDRSS_PI_98_DATA
+			DDRSS_PI_99_DATA
+			DDRSS_PI_100_DATA
+			DDRSS_PI_101_DATA
+			DDRSS_PI_102_DATA
+			DDRSS_PI_103_DATA
+			DDRSS_PI_104_DATA
+			DDRSS_PI_105_DATA
+			DDRSS_PI_106_DATA
+			DDRSS_PI_107_DATA
+			DDRSS_PI_108_DATA
+			DDRSS_PI_109_DATA
+			DDRSS_PI_110_DATA
+			DDRSS_PI_111_DATA
+			DDRSS_PI_112_DATA
+			DDRSS_PI_113_DATA
+			DDRSS_PI_114_DATA
+			DDRSS_PI_115_DATA
+			DDRSS_PI_116_DATA
+			DDRSS_PI_117_DATA
+			DDRSS_PI_118_DATA
+			DDRSS_PI_119_DATA
+			DDRSS_PI_120_DATA
+			DDRSS_PI_121_DATA
+			DDRSS_PI_122_DATA
+			DDRSS_PI_123_DATA
+			DDRSS_PI_124_DATA
+			DDRSS_PI_125_DATA
+			DDRSS_PI_126_DATA
+			DDRSS_PI_127_DATA
+			DDRSS_PI_128_DATA
+			DDRSS_PI_129_DATA
+			DDRSS_PI_130_DATA
+			DDRSS_PI_131_DATA
+			DDRSS_PI_132_DATA
+			DDRSS_PI_133_DATA
+			DDRSS_PI_134_DATA
+			DDRSS_PI_135_DATA
+			DDRSS_PI_136_DATA
+			DDRSS_PI_137_DATA
+			DDRSS_PI_138_DATA
+			DDRSS_PI_139_DATA
+			DDRSS_PI_140_DATA
+			DDRSS_PI_141_DATA
+			DDRSS_PI_142_DATA
+			DDRSS_PI_143_DATA
+			DDRSS_PI_144_DATA
+			DDRSS_PI_145_DATA
+			DDRSS_PI_146_DATA
+			DDRSS_PI_147_DATA
+			DDRSS_PI_148_DATA
+			DDRSS_PI_149_DATA
+			DDRSS_PI_150_DATA
+			DDRSS_PI_151_DATA
+			DDRSS_PI_152_DATA
+			DDRSS_PI_153_DATA
+			DDRSS_PI_154_DATA
+			DDRSS_PI_155_DATA
+			DDRSS_PI_156_DATA
+			DDRSS_PI_157_DATA
+			DDRSS_PI_158_DATA
+			DDRSS_PI_159_DATA
+			DDRSS_PI_160_DATA
+			DDRSS_PI_161_DATA
+			DDRSS_PI_162_DATA
+			DDRSS_PI_163_DATA
+			DDRSS_PI_164_DATA
+			DDRSS_PI_165_DATA
+			DDRSS_PI_166_DATA
+			DDRSS_PI_167_DATA
+			DDRSS_PI_168_DATA
+			DDRSS_PI_169_DATA
+			DDRSS_PI_170_DATA
+			DDRSS_PI_171_DATA
+			DDRSS_PI_172_DATA
+			DDRSS_PI_173_DATA
+			DDRSS_PI_174_DATA
+			DDRSS_PI_175_DATA
+			DDRSS_PI_176_DATA
+			DDRSS_PI_177_DATA
+			DDRSS_PI_178_DATA
+			DDRSS_PI_179_DATA
+			DDRSS_PI_180_DATA
+			DDRSS_PI_181_DATA
+			DDRSS_PI_182_DATA
+			DDRSS_PI_183_DATA
+			DDRSS_PI_184_DATA
+			DDRSS_PI_185_DATA
+			DDRSS_PI_186_DATA
+			DDRSS_PI_187_DATA
+			DDRSS_PI_188_DATA
+			DDRSS_PI_189_DATA
+			DDRSS_PI_190_DATA
+			DDRSS_PI_191_DATA
+			DDRSS_PI_192_DATA
+			DDRSS_PI_193_DATA
+			DDRSS_PI_194_DATA
+			DDRSS_PI_195_DATA
+			DDRSS_PI_196_DATA
+			DDRSS_PI_197_DATA
+			DDRSS_PI_198_DATA
+			DDRSS_PI_199_DATA
+			DDRSS_PI_200_DATA
+			DDRSS_PI_201_DATA
+			DDRSS_PI_202_DATA
+			DDRSS_PI_203_DATA
+			DDRSS_PI_204_DATA
+			DDRSS_PI_205_DATA
+			DDRSS_PI_206_DATA
+			DDRSS_PI_207_DATA
+			DDRSS_PI_208_DATA
+			DDRSS_PI_209_DATA
+			DDRSS_PI_210_DATA
+			DDRSS_PI_211_DATA
+			DDRSS_PI_212_DATA
+			DDRSS_PI_213_DATA
+			DDRSS_PI_214_DATA
+			DDRSS_PI_215_DATA
+			DDRSS_PI_216_DATA
+			DDRSS_PI_217_DATA
+			DDRSS_PI_218_DATA
+			DDRSS_PI_219_DATA
+			DDRSS_PI_220_DATA
+			DDRSS_PI_221_DATA
+			DDRSS_PI_222_DATA
+			DDRSS_PI_223_DATA
+			DDRSS_PI_224_DATA
+			DDRSS_PI_225_DATA
+			DDRSS_PI_226_DATA
+			DDRSS_PI_227_DATA
+			DDRSS_PI_228_DATA
+			DDRSS_PI_229_DATA
+			DDRSS_PI_230_DATA
+			DDRSS_PI_231_DATA
+			DDRSS_PI_232_DATA
+			DDRSS_PI_233_DATA
+			DDRSS_PI_234_DATA
+			DDRSS_PI_235_DATA
+			DDRSS_PI_236_DATA
+			DDRSS_PI_237_DATA
+			DDRSS_PI_238_DATA
+			DDRSS_PI_239_DATA
+			DDRSS_PI_240_DATA
+			DDRSS_PI_241_DATA
+			DDRSS_PI_242_DATA
+			DDRSS_PI_243_DATA
+			DDRSS_PI_244_DATA
+			DDRSS_PI_245_DATA
+			DDRSS_PI_246_DATA
+			DDRSS_PI_247_DATA
+			DDRSS_PI_248_DATA
+			DDRSS_PI_249_DATA
+			DDRSS_PI_250_DATA
+			DDRSS_PI_251_DATA
+			DDRSS_PI_252_DATA
+			DDRSS_PI_253_DATA
+			DDRSS_PI_254_DATA
+			DDRSS_PI_255_DATA
+			DDRSS_PI_256_DATA
+			DDRSS_PI_257_DATA
+			DDRSS_PI_258_DATA
+			DDRSS_PI_259_DATA
+			DDRSS_PI_260_DATA
+			DDRSS_PI_261_DATA
+			DDRSS_PI_262_DATA
+			DDRSS_PI_263_DATA
+			DDRSS_PI_264_DATA
+			DDRSS_PI_265_DATA
+			DDRSS_PI_266_DATA
+			DDRSS_PI_267_DATA
+			DDRSS_PI_268_DATA
+			DDRSS_PI_269_DATA
+			DDRSS_PI_270_DATA
+			DDRSS_PI_271_DATA
+			DDRSS_PI_272_DATA
+			DDRSS_PI_273_DATA
+			DDRSS_PI_274_DATA
+			DDRSS_PI_275_DATA
+			DDRSS_PI_276_DATA
+			DDRSS_PI_277_DATA
+			DDRSS_PI_278_DATA
+			DDRSS_PI_279_DATA
+			DDRSS_PI_280_DATA
+			DDRSS_PI_281_DATA
+			DDRSS_PI_282_DATA
+			DDRSS_PI_283_DATA
+			DDRSS_PI_284_DATA
+			DDRSS_PI_285_DATA
+			DDRSS_PI_286_DATA
+			DDRSS_PI_287_DATA
+			DDRSS_PI_288_DATA
+			DDRSS_PI_289_DATA
+			DDRSS_PI_290_DATA
+			DDRSS_PI_291_DATA
+			DDRSS_PI_292_DATA
+			DDRSS_PI_293_DATA
+			DDRSS_PI_294_DATA
+			DDRSS_PI_295_DATA
+			DDRSS_PI_296_DATA
+			DDRSS_PI_297_DATA
+			DDRSS_PI_298_DATA
+			DDRSS_PI_299_DATA
+		>;
+
+		ti,phy-data = <
+			DDRSS_PHY_00_DATA
+			DDRSS_PHY_01_DATA
+			DDRSS_PHY_02_DATA
+			DDRSS_PHY_03_DATA
+			DDRSS_PHY_04_DATA
+			DDRSS_PHY_05_DATA
+			DDRSS_PHY_06_DATA
+			DDRSS_PHY_07_DATA
+			DDRSS_PHY_08_DATA
+			DDRSS_PHY_09_DATA
+			DDRSS_PHY_10_DATA
+			DDRSS_PHY_11_DATA
+			DDRSS_PHY_12_DATA
+			DDRSS_PHY_13_DATA
+			DDRSS_PHY_14_DATA
+			DDRSS_PHY_15_DATA
+			DDRSS_PHY_16_DATA
+			DDRSS_PHY_17_DATA
+			DDRSS_PHY_18_DATA
+			DDRSS_PHY_19_DATA
+			DDRSS_PHY_20_DATA
+			DDRSS_PHY_21_DATA
+			DDRSS_PHY_22_DATA
+			DDRSS_PHY_23_DATA
+			DDRSS_PHY_24_DATA
+			DDRSS_PHY_25_DATA
+			DDRSS_PHY_26_DATA
+			DDRSS_PHY_27_DATA
+			DDRSS_PHY_28_DATA
+			DDRSS_PHY_29_DATA
+			DDRSS_PHY_30_DATA
+			DDRSS_PHY_31_DATA
+			DDRSS_PHY_32_DATA
+			DDRSS_PHY_33_DATA
+			DDRSS_PHY_34_DATA
+			DDRSS_PHY_35_DATA
+			DDRSS_PHY_36_DATA
+			DDRSS_PHY_37_DATA
+			DDRSS_PHY_38_DATA
+			DDRSS_PHY_39_DATA
+			DDRSS_PHY_40_DATA
+			DDRSS_PHY_41_DATA
+			DDRSS_PHY_42_DATA
+			DDRSS_PHY_43_DATA
+			DDRSS_PHY_44_DATA
+			DDRSS_PHY_45_DATA
+			DDRSS_PHY_46_DATA
+			DDRSS_PHY_47_DATA
+			DDRSS_PHY_48_DATA
+			DDRSS_PHY_49_DATA
+			DDRSS_PHY_50_DATA
+			DDRSS_PHY_51_DATA
+			DDRSS_PHY_52_DATA
+			DDRSS_PHY_53_DATA
+			DDRSS_PHY_54_DATA
+			DDRSS_PHY_55_DATA
+			DDRSS_PHY_56_DATA
+			DDRSS_PHY_57_DATA
+			DDRSS_PHY_58_DATA
+			DDRSS_PHY_59_DATA
+			DDRSS_PHY_60_DATA
+			DDRSS_PHY_61_DATA
+			DDRSS_PHY_62_DATA
+			DDRSS_PHY_63_DATA
+			DDRSS_PHY_64_DATA
+			DDRSS_PHY_65_DATA
+			DDRSS_PHY_66_DATA
+			DDRSS_PHY_67_DATA
+			DDRSS_PHY_68_DATA
+			DDRSS_PHY_69_DATA
+			DDRSS_PHY_70_DATA
+			DDRSS_PHY_71_DATA
+			DDRSS_PHY_72_DATA
+			DDRSS_PHY_73_DATA
+			DDRSS_PHY_74_DATA
+			DDRSS_PHY_75_DATA
+			DDRSS_PHY_76_DATA
+			DDRSS_PHY_77_DATA
+			DDRSS_PHY_78_DATA
+			DDRSS_PHY_79_DATA
+			DDRSS_PHY_80_DATA
+			DDRSS_PHY_81_DATA
+			DDRSS_PHY_82_DATA
+			DDRSS_PHY_83_DATA
+			DDRSS_PHY_84_DATA
+			DDRSS_PHY_85_DATA
+			DDRSS_PHY_86_DATA
+			DDRSS_PHY_87_DATA
+			DDRSS_PHY_88_DATA
+			DDRSS_PHY_89_DATA
+			DDRSS_PHY_90_DATA
+			DDRSS_PHY_91_DATA
+			DDRSS_PHY_92_DATA
+			DDRSS_PHY_93_DATA
+			DDRSS_PHY_94_DATA
+			DDRSS_PHY_95_DATA
+			DDRSS_PHY_96_DATA
+			DDRSS_PHY_97_DATA
+			DDRSS_PHY_98_DATA
+			DDRSS_PHY_99_DATA
+			DDRSS_PHY_100_DATA
+			DDRSS_PHY_101_DATA
+			DDRSS_PHY_102_DATA
+			DDRSS_PHY_103_DATA
+			DDRSS_PHY_104_DATA
+			DDRSS_PHY_105_DATA
+			DDRSS_PHY_106_DATA
+			DDRSS_PHY_107_DATA
+			DDRSS_PHY_108_DATA
+			DDRSS_PHY_109_DATA
+			DDRSS_PHY_110_DATA
+			DDRSS_PHY_111_DATA
+			DDRSS_PHY_112_DATA
+			DDRSS_PHY_113_DATA
+			DDRSS_PHY_114_DATA
+			DDRSS_PHY_115_DATA
+			DDRSS_PHY_116_DATA
+			DDRSS_PHY_117_DATA
+			DDRSS_PHY_118_DATA
+			DDRSS_PHY_119_DATA
+			DDRSS_PHY_120_DATA
+			DDRSS_PHY_121_DATA
+			DDRSS_PHY_122_DATA
+			DDRSS_PHY_123_DATA
+			DDRSS_PHY_124_DATA
+			DDRSS_PHY_125_DATA
+			DDRSS_PHY_126_DATA
+			DDRSS_PHY_127_DATA
+			DDRSS_PHY_128_DATA
+			DDRSS_PHY_129_DATA
+			DDRSS_PHY_130_DATA
+			DDRSS_PHY_131_DATA
+			DDRSS_PHY_132_DATA
+			DDRSS_PHY_133_DATA
+			DDRSS_PHY_134_DATA
+			DDRSS_PHY_135_DATA
+			DDRSS_PHY_136_DATA
+			DDRSS_PHY_137_DATA
+			DDRSS_PHY_138_DATA
+			DDRSS_PHY_139_DATA
+			DDRSS_PHY_140_DATA
+			DDRSS_PHY_141_DATA
+			DDRSS_PHY_142_DATA
+			DDRSS_PHY_143_DATA
+			DDRSS_PHY_144_DATA
+			DDRSS_PHY_145_DATA
+			DDRSS_PHY_146_DATA
+			DDRSS_PHY_147_DATA
+			DDRSS_PHY_148_DATA
+			DDRSS_PHY_149_DATA
+			DDRSS_PHY_150_DATA
+			DDRSS_PHY_151_DATA
+			DDRSS_PHY_152_DATA
+			DDRSS_PHY_153_DATA
+			DDRSS_PHY_154_DATA
+			DDRSS_PHY_155_DATA
+			DDRSS_PHY_156_DATA
+			DDRSS_PHY_157_DATA
+			DDRSS_PHY_158_DATA
+			DDRSS_PHY_159_DATA
+			DDRSS_PHY_160_DATA
+			DDRSS_PHY_161_DATA
+			DDRSS_PHY_162_DATA
+			DDRSS_PHY_163_DATA
+			DDRSS_PHY_164_DATA
+			DDRSS_PHY_165_DATA
+			DDRSS_PHY_166_DATA
+			DDRSS_PHY_167_DATA
+			DDRSS_PHY_168_DATA
+			DDRSS_PHY_169_DATA
+			DDRSS_PHY_170_DATA
+			DDRSS_PHY_171_DATA
+			DDRSS_PHY_172_DATA
+			DDRSS_PHY_173_DATA
+			DDRSS_PHY_174_DATA
+			DDRSS_PHY_175_DATA
+			DDRSS_PHY_176_DATA
+			DDRSS_PHY_177_DATA
+			DDRSS_PHY_178_DATA
+			DDRSS_PHY_179_DATA
+			DDRSS_PHY_180_DATA
+			DDRSS_PHY_181_DATA
+			DDRSS_PHY_182_DATA
+			DDRSS_PHY_183_DATA
+			DDRSS_PHY_184_DATA
+			DDRSS_PHY_185_DATA
+			DDRSS_PHY_186_DATA
+			DDRSS_PHY_187_DATA
+			DDRSS_PHY_188_DATA
+			DDRSS_PHY_189_DATA
+			DDRSS_PHY_190_DATA
+			DDRSS_PHY_191_DATA
+			DDRSS_PHY_192_DATA
+			DDRSS_PHY_193_DATA
+			DDRSS_PHY_194_DATA
+			DDRSS_PHY_195_DATA
+			DDRSS_PHY_196_DATA
+			DDRSS_PHY_197_DATA
+			DDRSS_PHY_198_DATA
+			DDRSS_PHY_199_DATA
+			DDRSS_PHY_200_DATA
+			DDRSS_PHY_201_DATA
+			DDRSS_PHY_202_DATA
+			DDRSS_PHY_203_DATA
+			DDRSS_PHY_204_DATA
+			DDRSS_PHY_205_DATA
+			DDRSS_PHY_206_DATA
+			DDRSS_PHY_207_DATA
+			DDRSS_PHY_208_DATA
+			DDRSS_PHY_209_DATA
+			DDRSS_PHY_210_DATA
+			DDRSS_PHY_211_DATA
+			DDRSS_PHY_212_DATA
+			DDRSS_PHY_213_DATA
+			DDRSS_PHY_214_DATA
+			DDRSS_PHY_215_DATA
+			DDRSS_PHY_216_DATA
+			DDRSS_PHY_217_DATA
+			DDRSS_PHY_218_DATA
+			DDRSS_PHY_219_DATA
+			DDRSS_PHY_220_DATA
+			DDRSS_PHY_221_DATA
+			DDRSS_PHY_222_DATA
+			DDRSS_PHY_223_DATA
+			DDRSS_PHY_224_DATA
+			DDRSS_PHY_225_DATA
+			DDRSS_PHY_226_DATA
+			DDRSS_PHY_227_DATA
+			DDRSS_PHY_228_DATA
+			DDRSS_PHY_229_DATA
+			DDRSS_PHY_230_DATA
+			DDRSS_PHY_231_DATA
+			DDRSS_PHY_232_DATA
+			DDRSS_PHY_233_DATA
+			DDRSS_PHY_234_DATA
+			DDRSS_PHY_235_DATA
+			DDRSS_PHY_236_DATA
+			DDRSS_PHY_237_DATA
+			DDRSS_PHY_238_DATA
+			DDRSS_PHY_239_DATA
+			DDRSS_PHY_240_DATA
+			DDRSS_PHY_241_DATA
+			DDRSS_PHY_242_DATA
+			DDRSS_PHY_243_DATA
+			DDRSS_PHY_244_DATA
+			DDRSS_PHY_245_DATA
+			DDRSS_PHY_246_DATA
+			DDRSS_PHY_247_DATA
+			DDRSS_PHY_248_DATA
+			DDRSS_PHY_249_DATA
+			DDRSS_PHY_250_DATA
+			DDRSS_PHY_251_DATA
+			DDRSS_PHY_252_DATA
+			DDRSS_PHY_253_DATA
+			DDRSS_PHY_254_DATA
+			DDRSS_PHY_255_DATA
+			DDRSS_PHY_256_DATA
+			DDRSS_PHY_257_DATA
+			DDRSS_PHY_258_DATA
+			DDRSS_PHY_259_DATA
+			DDRSS_PHY_260_DATA
+			DDRSS_PHY_261_DATA
+			DDRSS_PHY_262_DATA
+			DDRSS_PHY_263_DATA
+			DDRSS_PHY_264_DATA
+			DDRSS_PHY_265_DATA
+			DDRSS_PHY_266_DATA
+			DDRSS_PHY_267_DATA
+			DDRSS_PHY_268_DATA
+			DDRSS_PHY_269_DATA
+			DDRSS_PHY_270_DATA
+			DDRSS_PHY_271_DATA
+			DDRSS_PHY_272_DATA
+			DDRSS_PHY_273_DATA
+			DDRSS_PHY_274_DATA
+			DDRSS_PHY_275_DATA
+			DDRSS_PHY_276_DATA
+			DDRSS_PHY_277_DATA
+			DDRSS_PHY_278_DATA
+			DDRSS_PHY_279_DATA
+			DDRSS_PHY_280_DATA
+			DDRSS_PHY_281_DATA
+			DDRSS_PHY_282_DATA
+			DDRSS_PHY_283_DATA
+			DDRSS_PHY_284_DATA
+			DDRSS_PHY_285_DATA
+			DDRSS_PHY_286_DATA
+			DDRSS_PHY_287_DATA
+			DDRSS_PHY_288_DATA
+			DDRSS_PHY_289_DATA
+			DDRSS_PHY_290_DATA
+			DDRSS_PHY_291_DATA
+			DDRSS_PHY_292_DATA
+			DDRSS_PHY_293_DATA
+			DDRSS_PHY_294_DATA
+			DDRSS_PHY_295_DATA
+			DDRSS_PHY_296_DATA
+			DDRSS_PHY_297_DATA
+			DDRSS_PHY_298_DATA
+			DDRSS_PHY_299_DATA
+			DDRSS_PHY_300_DATA
+			DDRSS_PHY_301_DATA
+			DDRSS_PHY_302_DATA
+			DDRSS_PHY_303_DATA
+			DDRSS_PHY_304_DATA
+			DDRSS_PHY_305_DATA
+			DDRSS_PHY_306_DATA
+			DDRSS_PHY_307_DATA
+			DDRSS_PHY_308_DATA
+			DDRSS_PHY_309_DATA
+			DDRSS_PHY_310_DATA
+			DDRSS_PHY_311_DATA
+			DDRSS_PHY_312_DATA
+			DDRSS_PHY_313_DATA
+			DDRSS_PHY_314_DATA
+			DDRSS_PHY_315_DATA
+			DDRSS_PHY_316_DATA
+			DDRSS_PHY_317_DATA
+			DDRSS_PHY_318_DATA
+			DDRSS_PHY_319_DATA
+			DDRSS_PHY_320_DATA
+			DDRSS_PHY_321_DATA
+			DDRSS_PHY_322_DATA
+			DDRSS_PHY_323_DATA
+			DDRSS_PHY_324_DATA
+			DDRSS_PHY_325_DATA
+			DDRSS_PHY_326_DATA
+			DDRSS_PHY_327_DATA
+			DDRSS_PHY_328_DATA
+			DDRSS_PHY_329_DATA
+			DDRSS_PHY_330_DATA
+			DDRSS_PHY_331_DATA
+			DDRSS_PHY_332_DATA
+			DDRSS_PHY_333_DATA
+			DDRSS_PHY_334_DATA
+			DDRSS_PHY_335_DATA
+			DDRSS_PHY_336_DATA
+			DDRSS_PHY_337_DATA
+			DDRSS_PHY_338_DATA
+			DDRSS_PHY_339_DATA
+			DDRSS_PHY_340_DATA
+			DDRSS_PHY_341_DATA
+			DDRSS_PHY_342_DATA
+			DDRSS_PHY_343_DATA
+			DDRSS_PHY_344_DATA
+			DDRSS_PHY_345_DATA
+			DDRSS_PHY_346_DATA
+			DDRSS_PHY_347_DATA
+			DDRSS_PHY_348_DATA
+			DDRSS_PHY_349_DATA
+			DDRSS_PHY_350_DATA
+			DDRSS_PHY_351_DATA
+			DDRSS_PHY_352_DATA
+			DDRSS_PHY_353_DATA
+			DDRSS_PHY_354_DATA
+			DDRSS_PHY_355_DATA
+			DDRSS_PHY_356_DATA
+			DDRSS_PHY_357_DATA
+			DDRSS_PHY_358_DATA
+			DDRSS_PHY_359_DATA
+			DDRSS_PHY_360_DATA
+			DDRSS_PHY_361_DATA
+			DDRSS_PHY_362_DATA
+			DDRSS_PHY_363_DATA
+			DDRSS_PHY_364_DATA
+			DDRSS_PHY_365_DATA
+			DDRSS_PHY_366_DATA
+			DDRSS_PHY_367_DATA
+			DDRSS_PHY_368_DATA
+			DDRSS_PHY_369_DATA
+			DDRSS_PHY_370_DATA
+			DDRSS_PHY_371_DATA
+			DDRSS_PHY_372_DATA
+			DDRSS_PHY_373_DATA
+			DDRSS_PHY_374_DATA
+			DDRSS_PHY_375_DATA
+			DDRSS_PHY_376_DATA
+			DDRSS_PHY_377_DATA
+			DDRSS_PHY_378_DATA
+			DDRSS_PHY_379_DATA
+			DDRSS_PHY_380_DATA
+			DDRSS_PHY_381_DATA
+			DDRSS_PHY_382_DATA
+			DDRSS_PHY_383_DATA
+			DDRSS_PHY_384_DATA
+			DDRSS_PHY_385_DATA
+			DDRSS_PHY_386_DATA
+			DDRSS_PHY_387_DATA
+			DDRSS_PHY_388_DATA
+			DDRSS_PHY_389_DATA
+			DDRSS_PHY_390_DATA
+			DDRSS_PHY_391_DATA
+			DDRSS_PHY_392_DATA
+			DDRSS_PHY_393_DATA
+			DDRSS_PHY_394_DATA
+			DDRSS_PHY_395_DATA
+			DDRSS_PHY_396_DATA
+			DDRSS_PHY_397_DATA
+			DDRSS_PHY_398_DATA
+			DDRSS_PHY_399_DATA
+			DDRSS_PHY_400_DATA
+			DDRSS_PHY_401_DATA
+			DDRSS_PHY_402_DATA
+			DDRSS_PHY_403_DATA
+			DDRSS_PHY_404_DATA
+			DDRSS_PHY_405_DATA
+			DDRSS_PHY_406_DATA
+			DDRSS_PHY_407_DATA
+			DDRSS_PHY_408_DATA
+			DDRSS_PHY_409_DATA
+			DDRSS_PHY_410_DATA
+			DDRSS_PHY_411_DATA
+			DDRSS_PHY_412_DATA
+			DDRSS_PHY_413_DATA
+			DDRSS_PHY_414_DATA
+			DDRSS_PHY_415_DATA
+			DDRSS_PHY_416_DATA
+			DDRSS_PHY_417_DATA
+			DDRSS_PHY_418_DATA
+			DDRSS_PHY_419_DATA
+			DDRSS_PHY_420_DATA
+			DDRSS_PHY_421_DATA
+			DDRSS_PHY_422_DATA
+			DDRSS_PHY_423_DATA
+			DDRSS_PHY_424_DATA
+			DDRSS_PHY_425_DATA
+			DDRSS_PHY_426_DATA
+			DDRSS_PHY_427_DATA
+			DDRSS_PHY_428_DATA
+			DDRSS_PHY_429_DATA
+			DDRSS_PHY_430_DATA
+			DDRSS_PHY_431_DATA
+			DDRSS_PHY_432_DATA
+			DDRSS_PHY_433_DATA
+			DDRSS_PHY_434_DATA
+			DDRSS_PHY_435_DATA
+			DDRSS_PHY_436_DATA
+			DDRSS_PHY_437_DATA
+			DDRSS_PHY_438_DATA
+			DDRSS_PHY_439_DATA
+			DDRSS_PHY_440_DATA
+			DDRSS_PHY_441_DATA
+			DDRSS_PHY_442_DATA
+			DDRSS_PHY_443_DATA
+			DDRSS_PHY_444_DATA
+			DDRSS_PHY_445_DATA
+			DDRSS_PHY_446_DATA
+			DDRSS_PHY_447_DATA
+			DDRSS_PHY_448_DATA
+			DDRSS_PHY_449_DATA
+			DDRSS_PHY_450_DATA
+			DDRSS_PHY_451_DATA
+			DDRSS_PHY_452_DATA
+			DDRSS_PHY_453_DATA
+			DDRSS_PHY_454_DATA
+			DDRSS_PHY_455_DATA
+			DDRSS_PHY_456_DATA
+			DDRSS_PHY_457_DATA
+			DDRSS_PHY_458_DATA
+			DDRSS_PHY_459_DATA
+			DDRSS_PHY_460_DATA
+			DDRSS_PHY_461_DATA
+			DDRSS_PHY_462_DATA
+			DDRSS_PHY_463_DATA
+			DDRSS_PHY_464_DATA
+			DDRSS_PHY_465_DATA
+			DDRSS_PHY_466_DATA
+			DDRSS_PHY_467_DATA
+			DDRSS_PHY_468_DATA
+			DDRSS_PHY_469_DATA
+			DDRSS_PHY_470_DATA
+			DDRSS_PHY_471_DATA
+			DDRSS_PHY_472_DATA
+			DDRSS_PHY_473_DATA
+			DDRSS_PHY_474_DATA
+			DDRSS_PHY_475_DATA
+			DDRSS_PHY_476_DATA
+			DDRSS_PHY_477_DATA
+			DDRSS_PHY_478_DATA
+			DDRSS_PHY_479_DATA
+			DDRSS_PHY_480_DATA
+			DDRSS_PHY_481_DATA
+			DDRSS_PHY_482_DATA
+			DDRSS_PHY_483_DATA
+			DDRSS_PHY_484_DATA
+			DDRSS_PHY_485_DATA
+			DDRSS_PHY_486_DATA
+			DDRSS_PHY_487_DATA
+			DDRSS_PHY_488_DATA
+			DDRSS_PHY_489_DATA
+			DDRSS_PHY_490_DATA
+			DDRSS_PHY_491_DATA
+			DDRSS_PHY_492_DATA
+			DDRSS_PHY_493_DATA
+			DDRSS_PHY_494_DATA
+			DDRSS_PHY_495_DATA
+			DDRSS_PHY_496_DATA
+			DDRSS_PHY_497_DATA
+			DDRSS_PHY_498_DATA
+			DDRSS_PHY_499_DATA
+			DDRSS_PHY_500_DATA
+			DDRSS_PHY_501_DATA
+			DDRSS_PHY_502_DATA
+			DDRSS_PHY_503_DATA
+			DDRSS_PHY_504_DATA
+			DDRSS_PHY_505_DATA
+			DDRSS_PHY_506_DATA
+			DDRSS_PHY_507_DATA
+			DDRSS_PHY_508_DATA
+			DDRSS_PHY_509_DATA
+			DDRSS_PHY_510_DATA
+			DDRSS_PHY_511_DATA
+			DDRSS_PHY_512_DATA
+			DDRSS_PHY_513_DATA
+			DDRSS_PHY_514_DATA
+			DDRSS_PHY_515_DATA
+			DDRSS_PHY_516_DATA
+			DDRSS_PHY_517_DATA
+			DDRSS_PHY_518_DATA
+			DDRSS_PHY_519_DATA
+			DDRSS_PHY_520_DATA
+			DDRSS_PHY_521_DATA
+			DDRSS_PHY_522_DATA
+			DDRSS_PHY_523_DATA
+			DDRSS_PHY_524_DATA
+			DDRSS_PHY_525_DATA
+			DDRSS_PHY_526_DATA
+			DDRSS_PHY_527_DATA
+			DDRSS_PHY_528_DATA
+			DDRSS_PHY_529_DATA
+			DDRSS_PHY_530_DATA
+			DDRSS_PHY_531_DATA
+			DDRSS_PHY_532_DATA
+			DDRSS_PHY_533_DATA
+			DDRSS_PHY_534_DATA
+			DDRSS_PHY_535_DATA
+			DDRSS_PHY_536_DATA
+			DDRSS_PHY_537_DATA
+			DDRSS_PHY_538_DATA
+			DDRSS_PHY_539_DATA
+			DDRSS_PHY_540_DATA
+			DDRSS_PHY_541_DATA
+			DDRSS_PHY_542_DATA
+			DDRSS_PHY_543_DATA
+			DDRSS_PHY_544_DATA
+			DDRSS_PHY_545_DATA
+			DDRSS_PHY_546_DATA
+			DDRSS_PHY_547_DATA
+			DDRSS_PHY_548_DATA
+			DDRSS_PHY_549_DATA
+			DDRSS_PHY_550_DATA
+			DDRSS_PHY_551_DATA
+			DDRSS_PHY_552_DATA
+			DDRSS_PHY_553_DATA
+			DDRSS_PHY_554_DATA
+			DDRSS_PHY_555_DATA
+			DDRSS_PHY_556_DATA
+			DDRSS_PHY_557_DATA
+			DDRSS_PHY_558_DATA
+			DDRSS_PHY_559_DATA
+			DDRSS_PHY_560_DATA
+			DDRSS_PHY_561_DATA
+			DDRSS_PHY_562_DATA
+			DDRSS_PHY_563_DATA
+			DDRSS_PHY_564_DATA
+			DDRSS_PHY_565_DATA
+			DDRSS_PHY_566_DATA
+			DDRSS_PHY_567_DATA
+			DDRSS_PHY_568_DATA
+			DDRSS_PHY_569_DATA
+			DDRSS_PHY_570_DATA
+			DDRSS_PHY_571_DATA
+			DDRSS_PHY_572_DATA
+			DDRSS_PHY_573_DATA
+			DDRSS_PHY_574_DATA
+			DDRSS_PHY_575_DATA
+			DDRSS_PHY_576_DATA
+			DDRSS_PHY_577_DATA
+			DDRSS_PHY_578_DATA
+			DDRSS_PHY_579_DATA
+			DDRSS_PHY_580_DATA
+			DDRSS_PHY_581_DATA
+			DDRSS_PHY_582_DATA
+			DDRSS_PHY_583_DATA
+			DDRSS_PHY_584_DATA
+			DDRSS_PHY_585_DATA
+			DDRSS_PHY_586_DATA
+			DDRSS_PHY_587_DATA
+			DDRSS_PHY_588_DATA
+			DDRSS_PHY_589_DATA
+			DDRSS_PHY_590_DATA
+			DDRSS_PHY_591_DATA
+			DDRSS_PHY_592_DATA
+			DDRSS_PHY_593_DATA
+			DDRSS_PHY_594_DATA
+			DDRSS_PHY_595_DATA
+			DDRSS_PHY_596_DATA
+			DDRSS_PHY_597_DATA
+			DDRSS_PHY_598_DATA
+			DDRSS_PHY_599_DATA
+			DDRSS_PHY_600_DATA
+			DDRSS_PHY_601_DATA
+			DDRSS_PHY_602_DATA
+			DDRSS_PHY_603_DATA
+			DDRSS_PHY_604_DATA
+			DDRSS_PHY_605_DATA
+			DDRSS_PHY_606_DATA
+			DDRSS_PHY_607_DATA
+			DDRSS_PHY_608_DATA
+			DDRSS_PHY_609_DATA
+			DDRSS_PHY_610_DATA
+			DDRSS_PHY_611_DATA
+			DDRSS_PHY_612_DATA
+			DDRSS_PHY_613_DATA
+			DDRSS_PHY_614_DATA
+			DDRSS_PHY_615_DATA
+			DDRSS_PHY_616_DATA
+			DDRSS_PHY_617_DATA
+			DDRSS_PHY_618_DATA
+			DDRSS_PHY_619_DATA
+			DDRSS_PHY_620_DATA
+			DDRSS_PHY_621_DATA
+			DDRSS_PHY_622_DATA
+			DDRSS_PHY_623_DATA
+			DDRSS_PHY_624_DATA
+			DDRSS_PHY_625_DATA
+			DDRSS_PHY_626_DATA
+			DDRSS_PHY_627_DATA
+			DDRSS_PHY_628_DATA
+			DDRSS_PHY_629_DATA
+			DDRSS_PHY_630_DATA
+			DDRSS_PHY_631_DATA
+			DDRSS_PHY_632_DATA
+			DDRSS_PHY_633_DATA
+			DDRSS_PHY_634_DATA
+			DDRSS_PHY_635_DATA
+			DDRSS_PHY_636_DATA
+			DDRSS_PHY_637_DATA
+			DDRSS_PHY_638_DATA
+			DDRSS_PHY_639_DATA
+			DDRSS_PHY_640_DATA
+			DDRSS_PHY_641_DATA
+			DDRSS_PHY_642_DATA
+			DDRSS_PHY_643_DATA
+			DDRSS_PHY_644_DATA
+			DDRSS_PHY_645_DATA
+			DDRSS_PHY_646_DATA
+			DDRSS_PHY_647_DATA
+			DDRSS_PHY_648_DATA
+			DDRSS_PHY_649_DATA
+			DDRSS_PHY_650_DATA
+			DDRSS_PHY_651_DATA
+			DDRSS_PHY_652_DATA
+			DDRSS_PHY_653_DATA
+			DDRSS_PHY_654_DATA
+			DDRSS_PHY_655_DATA
+			DDRSS_PHY_656_DATA
+			DDRSS_PHY_657_DATA
+			DDRSS_PHY_658_DATA
+			DDRSS_PHY_659_DATA
+			DDRSS_PHY_660_DATA
+			DDRSS_PHY_661_DATA
+			DDRSS_PHY_662_DATA
+			DDRSS_PHY_663_DATA
+			DDRSS_PHY_664_DATA
+			DDRSS_PHY_665_DATA
+			DDRSS_PHY_666_DATA
+			DDRSS_PHY_667_DATA
+			DDRSS_PHY_668_DATA
+			DDRSS_PHY_669_DATA
+			DDRSS_PHY_670_DATA
+			DDRSS_PHY_671_DATA
+			DDRSS_PHY_672_DATA
+			DDRSS_PHY_673_DATA
+			DDRSS_PHY_674_DATA
+			DDRSS_PHY_675_DATA
+			DDRSS_PHY_676_DATA
+			DDRSS_PHY_677_DATA
+			DDRSS_PHY_678_DATA
+			DDRSS_PHY_679_DATA
+			DDRSS_PHY_680_DATA
+			DDRSS_PHY_681_DATA
+			DDRSS_PHY_682_DATA
+			DDRSS_PHY_683_DATA
+			DDRSS_PHY_684_DATA
+			DDRSS_PHY_685_DATA
+			DDRSS_PHY_686_DATA
+			DDRSS_PHY_687_DATA
+			DDRSS_PHY_688_DATA
+			DDRSS_PHY_689_DATA
+			DDRSS_PHY_690_DATA
+			DDRSS_PHY_691_DATA
+			DDRSS_PHY_692_DATA
+			DDRSS_PHY_693_DATA
+			DDRSS_PHY_694_DATA
+			DDRSS_PHY_695_DATA
+			DDRSS_PHY_696_DATA
+			DDRSS_PHY_697_DATA
+			DDRSS_PHY_698_DATA
+			DDRSS_PHY_699_DATA
+			DDRSS_PHY_700_DATA
+			DDRSS_PHY_701_DATA
+			DDRSS_PHY_702_DATA
+			DDRSS_PHY_703_DATA
+			DDRSS_PHY_704_DATA
+			DDRSS_PHY_705_DATA
+			DDRSS_PHY_706_DATA
+			DDRSS_PHY_707_DATA
+			DDRSS_PHY_708_DATA
+			DDRSS_PHY_709_DATA
+			DDRSS_PHY_710_DATA
+			DDRSS_PHY_711_DATA
+			DDRSS_PHY_712_DATA
+			DDRSS_PHY_713_DATA
+			DDRSS_PHY_714_DATA
+			DDRSS_PHY_715_DATA
+			DDRSS_PHY_716_DATA
+			DDRSS_PHY_717_DATA
+			DDRSS_PHY_718_DATA
+			DDRSS_PHY_719_DATA
+			DDRSS_PHY_720_DATA
+			DDRSS_PHY_721_DATA
+			DDRSS_PHY_722_DATA
+			DDRSS_PHY_723_DATA
+			DDRSS_PHY_724_DATA
+			DDRSS_PHY_725_DATA
+			DDRSS_PHY_726_DATA
+			DDRSS_PHY_727_DATA
+			DDRSS_PHY_728_DATA
+			DDRSS_PHY_729_DATA
+			DDRSS_PHY_730_DATA
+			DDRSS_PHY_731_DATA
+			DDRSS_PHY_732_DATA
+			DDRSS_PHY_733_DATA
+			DDRSS_PHY_734_DATA
+			DDRSS_PHY_735_DATA
+			DDRSS_PHY_736_DATA
+			DDRSS_PHY_737_DATA
+			DDRSS_PHY_738_DATA
+			DDRSS_PHY_739_DATA
+			DDRSS_PHY_740_DATA
+			DDRSS_PHY_741_DATA
+			DDRSS_PHY_742_DATA
+			DDRSS_PHY_743_DATA
+			DDRSS_PHY_744_DATA
+			DDRSS_PHY_745_DATA
+			DDRSS_PHY_746_DATA
+			DDRSS_PHY_747_DATA
+			DDRSS_PHY_748_DATA
+			DDRSS_PHY_749_DATA
+			DDRSS_PHY_750_DATA
+			DDRSS_PHY_751_DATA
+			DDRSS_PHY_752_DATA
+			DDRSS_PHY_753_DATA
+			DDRSS_PHY_754_DATA
+			DDRSS_PHY_755_DATA
+			DDRSS_PHY_756_DATA
+			DDRSS_PHY_757_DATA
+			DDRSS_PHY_758_DATA
+			DDRSS_PHY_759_DATA
+			DDRSS_PHY_760_DATA
+			DDRSS_PHY_761_DATA
+			DDRSS_PHY_762_DATA
+			DDRSS_PHY_763_DATA
+			DDRSS_PHY_764_DATA
+			DDRSS_PHY_765_DATA
+			DDRSS_PHY_766_DATA
+			DDRSS_PHY_767_DATA
+			DDRSS_PHY_768_DATA
+			DDRSS_PHY_769_DATA
+			DDRSS_PHY_770_DATA
+			DDRSS_PHY_771_DATA
+			DDRSS_PHY_772_DATA
+			DDRSS_PHY_773_DATA
+			DDRSS_PHY_774_DATA
+			DDRSS_PHY_775_DATA
+			DDRSS_PHY_776_DATA
+			DDRSS_PHY_777_DATA
+			DDRSS_PHY_778_DATA
+			DDRSS_PHY_779_DATA
+			DDRSS_PHY_780_DATA
+			DDRSS_PHY_781_DATA
+			DDRSS_PHY_782_DATA
+			DDRSS_PHY_783_DATA
+			DDRSS_PHY_784_DATA
+			DDRSS_PHY_785_DATA
+			DDRSS_PHY_786_DATA
+			DDRSS_PHY_787_DATA
+			DDRSS_PHY_788_DATA
+			DDRSS_PHY_789_DATA
+			DDRSS_PHY_790_DATA
+			DDRSS_PHY_791_DATA
+			DDRSS_PHY_792_DATA
+			DDRSS_PHY_793_DATA
+			DDRSS_PHY_794_DATA
+			DDRSS_PHY_795_DATA
+			DDRSS_PHY_796_DATA
+			DDRSS_PHY_797_DATA
+			DDRSS_PHY_798_DATA
+			DDRSS_PHY_799_DATA
+			DDRSS_PHY_800_DATA
+			DDRSS_PHY_801_DATA
+			DDRSS_PHY_802_DATA
+			DDRSS_PHY_803_DATA
+			DDRSS_PHY_804_DATA
+			DDRSS_PHY_805_DATA
+			DDRSS_PHY_806_DATA
+			DDRSS_PHY_807_DATA
+			DDRSS_PHY_808_DATA
+			DDRSS_PHY_809_DATA
+			DDRSS_PHY_810_DATA
+			DDRSS_PHY_811_DATA
+			DDRSS_PHY_812_DATA
+			DDRSS_PHY_813_DATA
+			DDRSS_PHY_814_DATA
+			DDRSS_PHY_815_DATA
+			DDRSS_PHY_816_DATA
+			DDRSS_PHY_817_DATA
+			DDRSS_PHY_818_DATA
+			DDRSS_PHY_819_DATA
+			DDRSS_PHY_820_DATA
+			DDRSS_PHY_821_DATA
+			DDRSS_PHY_822_DATA
+			DDRSS_PHY_823_DATA
+			DDRSS_PHY_824_DATA
+			DDRSS_PHY_825_DATA
+			DDRSS_PHY_826_DATA
+			DDRSS_PHY_827_DATA
+			DDRSS_PHY_828_DATA
+			DDRSS_PHY_829_DATA
+			DDRSS_PHY_830_DATA
+			DDRSS_PHY_831_DATA
+			DDRSS_PHY_832_DATA
+			DDRSS_PHY_833_DATA
+			DDRSS_PHY_834_DATA
+			DDRSS_PHY_835_DATA
+			DDRSS_PHY_836_DATA
+			DDRSS_PHY_837_DATA
+			DDRSS_PHY_838_DATA
+			DDRSS_PHY_839_DATA
+			DDRSS_PHY_840_DATA
+			DDRSS_PHY_841_DATA
+			DDRSS_PHY_842_DATA
+			DDRSS_PHY_843_DATA
+			DDRSS_PHY_844_DATA
+			DDRSS_PHY_845_DATA
+			DDRSS_PHY_846_DATA
+			DDRSS_PHY_847_DATA
+			DDRSS_PHY_848_DATA
+			DDRSS_PHY_849_DATA
+			DDRSS_PHY_850_DATA
+			DDRSS_PHY_851_DATA
+			DDRSS_PHY_852_DATA
+			DDRSS_PHY_853_DATA
+			DDRSS_PHY_854_DATA
+			DDRSS_PHY_855_DATA
+			DDRSS_PHY_856_DATA
+			DDRSS_PHY_857_DATA
+			DDRSS_PHY_858_DATA
+			DDRSS_PHY_859_DATA
+			DDRSS_PHY_860_DATA
+			DDRSS_PHY_861_DATA
+			DDRSS_PHY_862_DATA
+			DDRSS_PHY_863_DATA
+			DDRSS_PHY_864_DATA
+			DDRSS_PHY_865_DATA
+			DDRSS_PHY_866_DATA
+			DDRSS_PHY_867_DATA
+			DDRSS_PHY_868_DATA
+			DDRSS_PHY_869_DATA
+			DDRSS_PHY_870_DATA
+			DDRSS_PHY_871_DATA
+			DDRSS_PHY_872_DATA
+			DDRSS_PHY_873_DATA
+			DDRSS_PHY_874_DATA
+			DDRSS_PHY_875_DATA
+			DDRSS_PHY_876_DATA
+			DDRSS_PHY_877_DATA
+			DDRSS_PHY_878_DATA
+			DDRSS_PHY_879_DATA
+			DDRSS_PHY_880_DATA
+			DDRSS_PHY_881_DATA
+			DDRSS_PHY_882_DATA
+			DDRSS_PHY_883_DATA
+			DDRSS_PHY_884_DATA
+			DDRSS_PHY_885_DATA
+			DDRSS_PHY_886_DATA
+			DDRSS_PHY_887_DATA
+			DDRSS_PHY_888_DATA
+			DDRSS_PHY_889_DATA
+			DDRSS_PHY_890_DATA
+			DDRSS_PHY_891_DATA
+			DDRSS_PHY_892_DATA
+			DDRSS_PHY_893_DATA
+			DDRSS_PHY_894_DATA
+			DDRSS_PHY_895_DATA
+			DDRSS_PHY_896_DATA
+			DDRSS_PHY_897_DATA
+			DDRSS_PHY_898_DATA
+			DDRSS_PHY_899_DATA
+			DDRSS_PHY_900_DATA
+			DDRSS_PHY_901_DATA
+			DDRSS_PHY_902_DATA
+			DDRSS_PHY_903_DATA
+			DDRSS_PHY_904_DATA
+			DDRSS_PHY_905_DATA
+			DDRSS_PHY_906_DATA
+			DDRSS_PHY_907_DATA
+			DDRSS_PHY_908_DATA
+			DDRSS_PHY_909_DATA
+			DDRSS_PHY_910_DATA
+			DDRSS_PHY_911_DATA
+			DDRSS_PHY_912_DATA
+			DDRSS_PHY_913_DATA
+			DDRSS_PHY_914_DATA
+			DDRSS_PHY_915_DATA
+			DDRSS_PHY_916_DATA
+			DDRSS_PHY_917_DATA
+			DDRSS_PHY_918_DATA
+			DDRSS_PHY_919_DATA
+			DDRSS_PHY_920_DATA
+			DDRSS_PHY_921_DATA
+			DDRSS_PHY_922_DATA
+			DDRSS_PHY_923_DATA
+			DDRSS_PHY_924_DATA
+			DDRSS_PHY_925_DATA
+			DDRSS_PHY_926_DATA
+			DDRSS_PHY_927_DATA
+			DDRSS_PHY_928_DATA
+			DDRSS_PHY_929_DATA
+			DDRSS_PHY_930_DATA
+			DDRSS_PHY_931_DATA
+			DDRSS_PHY_932_DATA
+			DDRSS_PHY_933_DATA
+			DDRSS_PHY_934_DATA
+			DDRSS_PHY_935_DATA
+			DDRSS_PHY_936_DATA
+			DDRSS_PHY_937_DATA
+			DDRSS_PHY_938_DATA
+			DDRSS_PHY_939_DATA
+			DDRSS_PHY_940_DATA
+			DDRSS_PHY_941_DATA
+			DDRSS_PHY_942_DATA
+			DDRSS_PHY_943_DATA
+			DDRSS_PHY_944_DATA
+			DDRSS_PHY_945_DATA
+			DDRSS_PHY_946_DATA
+			DDRSS_PHY_947_DATA
+			DDRSS_PHY_948_DATA
+			DDRSS_PHY_949_DATA
+			DDRSS_PHY_950_DATA
+			DDRSS_PHY_951_DATA
+			DDRSS_PHY_952_DATA
+			DDRSS_PHY_953_DATA
+			DDRSS_PHY_954_DATA
+			DDRSS_PHY_955_DATA
+			DDRSS_PHY_956_DATA
+			DDRSS_PHY_957_DATA
+			DDRSS_PHY_958_DATA
+			DDRSS_PHY_959_DATA
+			DDRSS_PHY_960_DATA
+			DDRSS_PHY_961_DATA
+			DDRSS_PHY_962_DATA
+			DDRSS_PHY_963_DATA
+			DDRSS_PHY_964_DATA
+			DDRSS_PHY_965_DATA
+			DDRSS_PHY_966_DATA
+			DDRSS_PHY_967_DATA
+			DDRSS_PHY_968_DATA
+			DDRSS_PHY_969_DATA
+			DDRSS_PHY_970_DATA
+			DDRSS_PHY_971_DATA
+			DDRSS_PHY_972_DATA
+			DDRSS_PHY_973_DATA
+			DDRSS_PHY_974_DATA
+			DDRSS_PHY_975_DATA
+			DDRSS_PHY_976_DATA
+			DDRSS_PHY_977_DATA
+			DDRSS_PHY_978_DATA
+			DDRSS_PHY_979_DATA
+			DDRSS_PHY_980_DATA
+			DDRSS_PHY_981_DATA
+			DDRSS_PHY_982_DATA
+			DDRSS_PHY_983_DATA
+			DDRSS_PHY_984_DATA
+			DDRSS_PHY_985_DATA
+			DDRSS_PHY_986_DATA
+			DDRSS_PHY_987_DATA
+			DDRSS_PHY_988_DATA
+			DDRSS_PHY_989_DATA
+			DDRSS_PHY_990_DATA
+			DDRSS_PHY_991_DATA
+			DDRSS_PHY_992_DATA
+			DDRSS_PHY_993_DATA
+			DDRSS_PHY_994_DATA
+			DDRSS_PHY_995_DATA
+			DDRSS_PHY_996_DATA
+			DDRSS_PHY_997_DATA
+			DDRSS_PHY_998_DATA
+			DDRSS_PHY_999_DATA
+			DDRSS_PHY_1000_DATA
+			DDRSS_PHY_1001_DATA
+			DDRSS_PHY_1002_DATA
+			DDRSS_PHY_1003_DATA
+			DDRSS_PHY_1004_DATA
+			DDRSS_PHY_1005_DATA
+			DDRSS_PHY_1006_DATA
+			DDRSS_PHY_1007_DATA
+			DDRSS_PHY_1008_DATA
+			DDRSS_PHY_1009_DATA
+			DDRSS_PHY_1010_DATA
+			DDRSS_PHY_1011_DATA
+			DDRSS_PHY_1012_DATA
+			DDRSS_PHY_1013_DATA
+			DDRSS_PHY_1014_DATA
+			DDRSS_PHY_1015_DATA
+			DDRSS_PHY_1016_DATA
+			DDRSS_PHY_1017_DATA
+			DDRSS_PHY_1018_DATA
+			DDRSS_PHY_1019_DATA
+			DDRSS_PHY_1020_DATA
+			DDRSS_PHY_1021_DATA
+			DDRSS_PHY_1022_DATA
+			DDRSS_PHY_1023_DATA
+			DDRSS_PHY_1024_DATA
+			DDRSS_PHY_1025_DATA
+			DDRSS_PHY_1026_DATA
+			DDRSS_PHY_1027_DATA
+			DDRSS_PHY_1028_DATA
+			DDRSS_PHY_1029_DATA
+			DDRSS_PHY_1030_DATA
+			DDRSS_PHY_1031_DATA
+			DDRSS_PHY_1032_DATA
+			DDRSS_PHY_1033_DATA
+			DDRSS_PHY_1034_DATA
+			DDRSS_PHY_1035_DATA
+			DDRSS_PHY_1036_DATA
+			DDRSS_PHY_1037_DATA
+			DDRSS_PHY_1038_DATA
+			DDRSS_PHY_1039_DATA
+			DDRSS_PHY_1040_DATA
+			DDRSS_PHY_1041_DATA
+			DDRSS_PHY_1042_DATA
+			DDRSS_PHY_1043_DATA
+			DDRSS_PHY_1044_DATA
+			DDRSS_PHY_1045_DATA
+			DDRSS_PHY_1046_DATA
+			DDRSS_PHY_1047_DATA
+			DDRSS_PHY_1048_DATA
+			DDRSS_PHY_1049_DATA
+			DDRSS_PHY_1050_DATA
+			DDRSS_PHY_1051_DATA
+			DDRSS_PHY_1052_DATA
+			DDRSS_PHY_1053_DATA
+			DDRSS_PHY_1054_DATA
+			DDRSS_PHY_1055_DATA
+			DDRSS_PHY_1056_DATA
+			DDRSS_PHY_1057_DATA
+			DDRSS_PHY_1058_DATA
+			DDRSS_PHY_1059_DATA
+			DDRSS_PHY_1060_DATA
+			DDRSS_PHY_1061_DATA
+			DDRSS_PHY_1062_DATA
+			DDRSS_PHY_1063_DATA
+			DDRSS_PHY_1064_DATA
+			DDRSS_PHY_1065_DATA
+			DDRSS_PHY_1066_DATA
+			DDRSS_PHY_1067_DATA
+			DDRSS_PHY_1068_DATA
+			DDRSS_PHY_1069_DATA
+			DDRSS_PHY_1070_DATA
+			DDRSS_PHY_1071_DATA
+			DDRSS_PHY_1072_DATA
+			DDRSS_PHY_1073_DATA
+			DDRSS_PHY_1074_DATA
+			DDRSS_PHY_1075_DATA
+			DDRSS_PHY_1076_DATA
+			DDRSS_PHY_1077_DATA
+			DDRSS_PHY_1078_DATA
+			DDRSS_PHY_1079_DATA
+			DDRSS_PHY_1080_DATA
+			DDRSS_PHY_1081_DATA
+			DDRSS_PHY_1082_DATA
+			DDRSS_PHY_1083_DATA
+			DDRSS_PHY_1084_DATA
+			DDRSS_PHY_1085_DATA
+			DDRSS_PHY_1086_DATA
+			DDRSS_PHY_1087_DATA
+			DDRSS_PHY_1088_DATA
+			DDRSS_PHY_1089_DATA
+			DDRSS_PHY_1090_DATA
+			DDRSS_PHY_1091_DATA
+			DDRSS_PHY_1092_DATA
+			DDRSS_PHY_1093_DATA
+			DDRSS_PHY_1094_DATA
+			DDRSS_PHY_1095_DATA
+			DDRSS_PHY_1096_DATA
+			DDRSS_PHY_1097_DATA
+			DDRSS_PHY_1098_DATA
+			DDRSS_PHY_1099_DATA
+			DDRSS_PHY_1100_DATA
+			DDRSS_PHY_1101_DATA
+			DDRSS_PHY_1102_DATA
+			DDRSS_PHY_1103_DATA
+			DDRSS_PHY_1104_DATA
+			DDRSS_PHY_1105_DATA
+			DDRSS_PHY_1106_DATA
+			DDRSS_PHY_1107_DATA
+			DDRSS_PHY_1108_DATA
+			DDRSS_PHY_1109_DATA
+			DDRSS_PHY_1110_DATA
+			DDRSS_PHY_1111_DATA
+			DDRSS_PHY_1112_DATA
+			DDRSS_PHY_1113_DATA
+			DDRSS_PHY_1114_DATA
+			DDRSS_PHY_1115_DATA
+			DDRSS_PHY_1116_DATA
+			DDRSS_PHY_1117_DATA
+			DDRSS_PHY_1118_DATA
+			DDRSS_PHY_1119_DATA
+			DDRSS_PHY_1120_DATA
+			DDRSS_PHY_1121_DATA
+			DDRSS_PHY_1122_DATA
+			DDRSS_PHY_1123_DATA
+			DDRSS_PHY_1124_DATA
+			DDRSS_PHY_1125_DATA
+			DDRSS_PHY_1126_DATA
+			DDRSS_PHY_1127_DATA
+			DDRSS_PHY_1128_DATA
+			DDRSS_PHY_1129_DATA
+			DDRSS_PHY_1130_DATA
+			DDRSS_PHY_1131_DATA
+			DDRSS_PHY_1132_DATA
+			DDRSS_PHY_1133_DATA
+			DDRSS_PHY_1134_DATA
+			DDRSS_PHY_1135_DATA
+			DDRSS_PHY_1136_DATA
+			DDRSS_PHY_1137_DATA
+			DDRSS_PHY_1138_DATA
+			DDRSS_PHY_1139_DATA
+			DDRSS_PHY_1140_DATA
+			DDRSS_PHY_1141_DATA
+			DDRSS_PHY_1142_DATA
+			DDRSS_PHY_1143_DATA
+			DDRSS_PHY_1144_DATA
+			DDRSS_PHY_1145_DATA
+			DDRSS_PHY_1146_DATA
+			DDRSS_PHY_1147_DATA
+			DDRSS_PHY_1148_DATA
+			DDRSS_PHY_1149_DATA
+			DDRSS_PHY_1150_DATA
+			DDRSS_PHY_1151_DATA
+			DDRSS_PHY_1152_DATA
+			DDRSS_PHY_1153_DATA
+			DDRSS_PHY_1154_DATA
+			DDRSS_PHY_1155_DATA
+			DDRSS_PHY_1156_DATA
+			DDRSS_PHY_1157_DATA
+			DDRSS_PHY_1158_DATA
+			DDRSS_PHY_1159_DATA
+			DDRSS_PHY_1160_DATA
+			DDRSS_PHY_1161_DATA
+			DDRSS_PHY_1162_DATA
+			DDRSS_PHY_1163_DATA
+			DDRSS_PHY_1164_DATA
+			DDRSS_PHY_1165_DATA
+			DDRSS_PHY_1166_DATA
+			DDRSS_PHY_1167_DATA
+			DDRSS_PHY_1168_DATA
+			DDRSS_PHY_1169_DATA
+			DDRSS_PHY_1170_DATA
+			DDRSS_PHY_1171_DATA
+			DDRSS_PHY_1172_DATA
+			DDRSS_PHY_1173_DATA
+			DDRSS_PHY_1174_DATA
+			DDRSS_PHY_1175_DATA
+			DDRSS_PHY_1176_DATA
+			DDRSS_PHY_1177_DATA
+			DDRSS_PHY_1178_DATA
+			DDRSS_PHY_1179_DATA
+			DDRSS_PHY_1180_DATA
+			DDRSS_PHY_1181_DATA
+			DDRSS_PHY_1182_DATA
+			DDRSS_PHY_1183_DATA
+			DDRSS_PHY_1184_DATA
+			DDRSS_PHY_1185_DATA
+			DDRSS_PHY_1186_DATA
+			DDRSS_PHY_1187_DATA
+			DDRSS_PHY_1188_DATA
+			DDRSS_PHY_1189_DATA
+			DDRSS_PHY_1190_DATA
+			DDRSS_PHY_1191_DATA
+			DDRSS_PHY_1192_DATA
+			DDRSS_PHY_1193_DATA
+			DDRSS_PHY_1194_DATA
+			DDRSS_PHY_1195_DATA
+			DDRSS_PHY_1196_DATA
+			DDRSS_PHY_1197_DATA
+			DDRSS_PHY_1198_DATA
+			DDRSS_PHY_1199_DATA
+			DDRSS_PHY_1200_DATA
+			DDRSS_PHY_1201_DATA
+			DDRSS_PHY_1202_DATA
+			DDRSS_PHY_1203_DATA
+			DDRSS_PHY_1204_DATA
+			DDRSS_PHY_1205_DATA
+			DDRSS_PHY_1206_DATA
+			DDRSS_PHY_1207_DATA
+			DDRSS_PHY_1208_DATA
+			DDRSS_PHY_1209_DATA
+			DDRSS_PHY_1210_DATA
+			DDRSS_PHY_1211_DATA
+			DDRSS_PHY_1212_DATA
+			DDRSS_PHY_1213_DATA
+			DDRSS_PHY_1214_DATA
+			DDRSS_PHY_1215_DATA
+			DDRSS_PHY_1216_DATA
+			DDRSS_PHY_1217_DATA
+			DDRSS_PHY_1218_DATA
+			DDRSS_PHY_1219_DATA
+			DDRSS_PHY_1220_DATA
+			DDRSS_PHY_1221_DATA
+			DDRSS_PHY_1222_DATA
+			DDRSS_PHY_1223_DATA
+			DDRSS_PHY_1224_DATA
+			DDRSS_PHY_1225_DATA
+			DDRSS_PHY_1226_DATA
+			DDRSS_PHY_1227_DATA
+			DDRSS_PHY_1228_DATA
+			DDRSS_PHY_1229_DATA
+			DDRSS_PHY_1230_DATA
+			DDRSS_PHY_1231_DATA
+			DDRSS_PHY_1232_DATA
+			DDRSS_PHY_1233_DATA
+			DDRSS_PHY_1234_DATA
+			DDRSS_PHY_1235_DATA
+			DDRSS_PHY_1236_DATA
+			DDRSS_PHY_1237_DATA
+			DDRSS_PHY_1238_DATA
+			DDRSS_PHY_1239_DATA
+			DDRSS_PHY_1240_DATA
+			DDRSS_PHY_1241_DATA
+			DDRSS_PHY_1242_DATA
+			DDRSS_PHY_1243_DATA
+			DDRSS_PHY_1244_DATA
+			DDRSS_PHY_1245_DATA
+			DDRSS_PHY_1246_DATA
+			DDRSS_PHY_1247_DATA
+			DDRSS_PHY_1248_DATA
+			DDRSS_PHY_1249_DATA
+			DDRSS_PHY_1250_DATA
+			DDRSS_PHY_1251_DATA
+			DDRSS_PHY_1252_DATA
+			DDRSS_PHY_1253_DATA
+			DDRSS_PHY_1254_DATA
+			DDRSS_PHY_1255_DATA
+			DDRSS_PHY_1256_DATA
+			DDRSS_PHY_1257_DATA
+			DDRSS_PHY_1258_DATA
+			DDRSS_PHY_1259_DATA
+			DDRSS_PHY_1260_DATA
+			DDRSS_PHY_1261_DATA
+			DDRSS_PHY_1262_DATA
+			DDRSS_PHY_1263_DATA
+			DDRSS_PHY_1264_DATA
+			DDRSS_PHY_1265_DATA
+			DDRSS_PHY_1266_DATA
+			DDRSS_PHY_1267_DATA
+			DDRSS_PHY_1268_DATA
+			DDRSS_PHY_1269_DATA
+			DDRSS_PHY_1270_DATA
+			DDRSS_PHY_1271_DATA
+			DDRSS_PHY_1272_DATA
+			DDRSS_PHY_1273_DATA
+			DDRSS_PHY_1274_DATA
+			DDRSS_PHY_1275_DATA
+			DDRSS_PHY_1276_DATA
+			DDRSS_PHY_1277_DATA
+			DDRSS_PHY_1278_DATA
+			DDRSS_PHY_1279_DATA
+			DDRSS_PHY_1280_DATA
+			DDRSS_PHY_1281_DATA
+			DDRSS_PHY_1282_DATA
+			DDRSS_PHY_1283_DATA
+			DDRSS_PHY_1284_DATA
+			DDRSS_PHY_1285_DATA
+			DDRSS_PHY_1286_DATA
+			DDRSS_PHY_1287_DATA
+			DDRSS_PHY_1288_DATA
+			DDRSS_PHY_1289_DATA
+			DDRSS_PHY_1290_DATA
+			DDRSS_PHY_1291_DATA
+			DDRSS_PHY_1292_DATA
+			DDRSS_PHY_1293_DATA
+			DDRSS_PHY_1294_DATA
+			DDRSS_PHY_1295_DATA
+			DDRSS_PHY_1296_DATA
+			DDRSS_PHY_1297_DATA
+			DDRSS_PHY_1298_DATA
+			DDRSS_PHY_1299_DATA
+			DDRSS_PHY_1300_DATA
+			DDRSS_PHY_1301_DATA
+			DDRSS_PHY_1302_DATA
+			DDRSS_PHY_1303_DATA
+			DDRSS_PHY_1304_DATA
+			DDRSS_PHY_1305_DATA
+			DDRSS_PHY_1306_DATA
+			DDRSS_PHY_1307_DATA
+			DDRSS_PHY_1308_DATA
+			DDRSS_PHY_1309_DATA
+			DDRSS_PHY_1310_DATA
+			DDRSS_PHY_1311_DATA
+			DDRSS_PHY_1312_DATA
+			DDRSS_PHY_1313_DATA
+			DDRSS_PHY_1314_DATA
+			DDRSS_PHY_1315_DATA
+			DDRSS_PHY_1316_DATA
+			DDRSS_PHY_1317_DATA
+			DDRSS_PHY_1318_DATA
+			DDRSS_PHY_1319_DATA
+			DDRSS_PHY_1320_DATA
+			DDRSS_PHY_1321_DATA
+			DDRSS_PHY_1322_DATA
+			DDRSS_PHY_1323_DATA
+			DDRSS_PHY_1324_DATA
+			DDRSS_PHY_1325_DATA
+			DDRSS_PHY_1326_DATA
+			DDRSS_PHY_1327_DATA
+			DDRSS_PHY_1328_DATA
+			DDRSS_PHY_1329_DATA
+			DDRSS_PHY_1330_DATA
+			DDRSS_PHY_1331_DATA
+			DDRSS_PHY_1332_DATA
+			DDRSS_PHY_1333_DATA
+			DDRSS_PHY_1334_DATA
+			DDRSS_PHY_1335_DATA
+			DDRSS_PHY_1336_DATA
+			DDRSS_PHY_1337_DATA
+			DDRSS_PHY_1338_DATA
+			DDRSS_PHY_1339_DATA
+			DDRSS_PHY_1340_DATA
+			DDRSS_PHY_1341_DATA
+			DDRSS_PHY_1342_DATA
+			DDRSS_PHY_1343_DATA
+			DDRSS_PHY_1344_DATA
+			DDRSS_PHY_1345_DATA
+			DDRSS_PHY_1346_DATA
+			DDRSS_PHY_1347_DATA
+			DDRSS_PHY_1348_DATA
+			DDRSS_PHY_1349_DATA
+			DDRSS_PHY_1350_DATA
+			DDRSS_PHY_1351_DATA
+			DDRSS_PHY_1352_DATA
+			DDRSS_PHY_1353_DATA
+			DDRSS_PHY_1354_DATA
+			DDRSS_PHY_1355_DATA
+			DDRSS_PHY_1356_DATA
+			DDRSS_PHY_1357_DATA
+			DDRSS_PHY_1358_DATA
+			DDRSS_PHY_1359_DATA
+			DDRSS_PHY_1360_DATA
+			DDRSS_PHY_1361_DATA
+			DDRSS_PHY_1362_DATA
+			DDRSS_PHY_1363_DATA
+			DDRSS_PHY_1364_DATA
+			DDRSS_PHY_1365_DATA
+			DDRSS_PHY_1366_DATA
+			DDRSS_PHY_1367_DATA
+			DDRSS_PHY_1368_DATA
+			DDRSS_PHY_1369_DATA
+			DDRSS_PHY_1370_DATA
+			DDRSS_PHY_1371_DATA
+			DDRSS_PHY_1372_DATA
+			DDRSS_PHY_1373_DATA
+			DDRSS_PHY_1374_DATA
+			DDRSS_PHY_1375_DATA
+			DDRSS_PHY_1376_DATA
+			DDRSS_PHY_1377_DATA
+			DDRSS_PHY_1378_DATA
+			DDRSS_PHY_1379_DATA
+			DDRSS_PHY_1380_DATA
+			DDRSS_PHY_1381_DATA
+			DDRSS_PHY_1382_DATA
+			DDRSS_PHY_1383_DATA
+			DDRSS_PHY_1384_DATA
+			DDRSS_PHY_1385_DATA
+			DDRSS_PHY_1386_DATA
+			DDRSS_PHY_1387_DATA
+			DDRSS_PHY_1388_DATA
+			DDRSS_PHY_1389_DATA
+			DDRSS_PHY_1390_DATA
+			DDRSS_PHY_1391_DATA
+			DDRSS_PHY_1392_DATA
+			DDRSS_PHY_1393_DATA
+			DDRSS_PHY_1394_DATA
+			DDRSS_PHY_1395_DATA
+			DDRSS_PHY_1396_DATA
+			DDRSS_PHY_1397_DATA
+			DDRSS_PHY_1398_DATA
+			DDRSS_PHY_1399_DATA
+			DDRSS_PHY_1400_DATA
+			DDRSS_PHY_1401_DATA
+			DDRSS_PHY_1402_DATA
+			DDRSS_PHY_1403_DATA
+			DDRSS_PHY_1404_DATA
+			DDRSS_PHY_1405_DATA
+			DDRSS_PHY_1406_DATA
+			DDRSS_PHY_1407_DATA
+			DDRSS_PHY_1408_DATA
+			DDRSS_PHY_1409_DATA
+			DDRSS_PHY_1410_DATA
+			DDRSS_PHY_1411_DATA
+			DDRSS_PHY_1412_DATA
+			DDRSS_PHY_1413_DATA
+			DDRSS_PHY_1414_DATA
+			DDRSS_PHY_1415_DATA
+			DDRSS_PHY_1416_DATA
+			DDRSS_PHY_1417_DATA
+			DDRSS_PHY_1418_DATA
+			DDRSS_PHY_1419_DATA
+			DDRSS_PHY_1420_DATA
+			DDRSS_PHY_1421_DATA
+			DDRSS_PHY_1422_DATA
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-main.dtsi b/roms/u-boot/arch/arm/dts/k3-j721e-main.dtsi
new file mode 100644
index 000000000..07b489679
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-main.dtsi
@@ -0,0 +1,1699 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/mux/ti-serdes.h>
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x800000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		pcie0_ctrl: syscon@4070 {
+			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+			reg = <0x00004070 0x4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x4070 0x4070 0x4>;
+		};
+
+		pcie1_ctrl: syscon@4074 {
+			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+			reg = <0x00004074 0x4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x4074 0x4074 0x4>;
+		};
+
+		pcie2_ctrl: syscon@4078 {
+			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+			reg = <0x00004078 0x4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x4078 0x4078 0x4>;
+		};
+
+		pcie3_ctrl: syscon@407c {
+			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+			reg = <0x0000407c 0x4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x407c 0x407c 0x4>;
+		};
+
+		serdes_ln_ctrl: mux@4080 {
+			compatible = "mmio-mux";
+			reg = <0x00004080 0x50>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+					/* SERDES4 lane0/1/2/3 select */
+			idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+				      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+				      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+				      <MUX_IDLE_AS_IS>, <J721E_SERDES3_LANE1_USB3_0>,
+				      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+				      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
+					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
+	    };
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller0 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <131>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main-navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <199>;
+
+		main_navss_intr: interrupt-controller1 {
+			compatible = "ti,sci-intr";
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <213>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: interrupt-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x0 0x33d00000 0x0 0x100000>;
+			interrupt-controller;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			#interrupt-cells = <0>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <209>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu0: iommu@36600000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x36600000 0x0 0x100000>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			#iommu-cells = <1>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x3c000000 0x0 0x400000>,
+				<0x0 0x38000000 0x0 0x400000>,
+				<0x0 0x31120000 0x0 0x100>,
+				<0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg =	<0x0 0x31150000 0x0 0x100>,
+				<0x0 0x34000000 0x0 0x100000>,
+				<0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 201 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x0 0x4e00000 0x0 0x1200>;
+		power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+
+		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+				<&main_udmap 0x4001>;
+		dma-names = "tx", "rx1", "rx2";
+		dma-coherent;
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x0 0x4e10000 0x0 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&k3_clks 264 1>;
+		};
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x2b4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	dummy_cmn_refclk: dummy-cmn-refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	dummy_cmn_refclk1: dummy-cmn-refclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	serdes_wiz0: wiz@5000000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+		assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5000000 0x0 0x5000000 0x10000>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 0>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz0_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5000000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz0 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz1: wiz@5010000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
+		assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5010000 0x0 0x5010000 0x10000>;
+
+		wiz1_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 293 0>;
+		};
+
+		wiz1_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div{
+			clocks = <&wiz1_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz1_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes1: serdes@5010000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5010000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz1 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz2: wiz@5020000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
+		assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5020000 0x0 0x5020000 0x10000>;
+
+		wiz2_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 294 0>;
+		};
+
+		wiz2_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz2_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz2_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes2: serdes@5020000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5020000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz2 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz3: wiz@5030000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
+		assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5030000 0x0 0x5030000 0x10000>;
+
+		wiz3_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 295 0>;
+		};
+
+		wiz3_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz3_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz3_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes3: serdes@5030000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5030000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz3 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	pcie0_rc: pcie@2900000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+	};
+
+	pcie0_ep: pcie-ep@2900000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		cdns,max-outbound-regions = <16>;
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+		dma-coherent;
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 1>;
+		clock-names = "fck";
+		cdns,max-outbound-regions = <16>;
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+		dma-coherent;
+	};
+
+	pcie2_rc: pcie@2920000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02920000 0x00 0x1000>,
+		      <0x00 0x02927000 0x00 0x400>,
+		      <0x00 0x0e000000 0x00 0x00800000>,
+		      <0x44 0x00000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie2_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 241 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x20000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+	};
+
+	pcie2_ep: pcie-ep@2920000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02920000 0x00 0x1000>,
+		      <0x00 0x02927000 0x00 0x400>,
+		      <0x00 0x0e000000 0x00 0x00800000>,
+		      <0x44 0x00000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&pcie2_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 241 1>;
+		clock-names = "fck";
+		cdns,max-outbound-regions = <16>;
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+		dma-coherent;
+	};
+
+	pcie3_rc: pcie@2930000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02930000 0x00 0x1000>,
+		      <0x00 0x02937000 0x00 0x400>,
+		      <0x00 0x0e800000 0x00 0x00800000>,
+		      <0x44 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie3_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 242 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x30000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+	};
+
+	pcie3_ep: pcie-ep@2930000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02930000 0x00 0x1000>,
+		      <0x00 0x02937000 0x00 0x400>,
+		      <0x00 0x0e800000 0x00 0x00800000>,
+		      <0x44 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&pcie3_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 242 1>;
+		clock-names = "fck";
+		cdns,max-outbound-regions = <16>;
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+		dma-coherent;
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 0>;
+		clock-names = "fclk";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <256>, <257>, <258>, <259>,
+			     <260>, <261>, <262>, <263>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <288>, <289>, <290>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00610000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <264>, <265>, <266>, <267>,
+			     <268>, <269>, <270>, <271>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio3: gpio@611000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00611000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <292>, <293>, <294>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 108 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00620000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <272>, <273>, <274>, <275>,
+			     <276>, <277>, <278>, <279>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 109 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio5: gpio@621000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00621000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <296>, <297>, <298>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 110 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00630000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <280>, <281>, <282>, <283>,
+			     <284>, <285>, <286>, <287>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio7: gpio@631000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00631000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <300>, <301>, <302>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 112 0>;
+		clock-names = "gpio";
+	};
+
+	main_sdhci0: sdhci@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 91 1>, <&k3_clks 91 0>;
+		assigned-clocks = <&k3_clks 91 1>;
+		assigned-clock-parents = <&k3_clks 91 2>;
+		bus-width = <8>;
+		mmc-hs200-1_8v;
+		mmc-ddr-1_8v;
+		ti,otap-del-sel-legacy = <0xf>;
+		ti,otap-del-sel-mmc-hs = <0xf>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x6>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	main_sdhci1: sdhci@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 92 0>, <&k3_clks 92 5>;
+		assigned-clocks = <&k3_clks 92 0>;
+		assigned-clock-parents = <&k3_clks 92 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
+		ti,trm-icp = <0x8>;
+		ti,clkbuf-sel = <0x7>;
+		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
+	};
+
+	main_sdhci2: sdhci@4f98000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 93 0>, <&k3_clks 93 5>;
+		assigned-clocks = <&k3_clks 93 0>;
+		assigned-clock-parents = <&k3_clks 93 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
+		ti,trm-icp = <0x8>;
+		ti,clkbuf-sel = <0x7>;
+		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
+	};
+
+	usbss0: cdns-usb@4104000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4104000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 288 15>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb0: usb@6000000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6000000 0x00 0x10000>,
+			      <0x00 0x6010000 0x00 0x10000>,
+			      <0x00 0x6020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: cdns-usb@4114000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4114000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 289 15>, <&k3_clks 289 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 289 15>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 289 16>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb1: usb@6400000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6400000 0x00 0x10000>,
+			      <0x00 0x6410000 0x00 0x10000>,
+			      <0x00 0x6420000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 0>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 0>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 0>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 0>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2040000 0x0 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 0>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2050000 0x0 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 0>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2060000 0x0 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 0>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	ufs_wrapper: ufs-wrapper@4e80000 {
+		compatible = "ti,j721e-ufs";
+		reg = <0x0 0x4e80000 0x0 0x100>;
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 277 1>;
+		assigned-clocks = <&k3_clks 277 1>;
+		assigned-clock-parents = <&k3_clks 277 4>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ufs@4e84000 {
+			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+			reg = <0x0 0x4e84000 0x0 0x10000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+			clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
+			clock-names = "core_clk", "phy_clk", "ref_clk";
+			dma-coherent;
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg =
+			<0x00 0x04a00000 0x00 0x10000>, /* common_m */
+			<0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+			<0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+			<0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+
+			<0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+			<0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+			<0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+			<0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+
+			<0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+			<0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+			<0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+			<0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+
+			<0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+			<0x00 0x04aa0000 0x00 0x10000>, /* vp2 */
+			<0x00 0x04ac0000 0x00 0x10000>, /* vp3 */
+			<0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+			<0x00 0x04af0000 0x00 0x10000>; /* wb */
+
+		reg-names = "common_m", "common_s0",
+			"common_s1", "common_s2",
+			"vidl1", "vidl2","vid1","vid2",
+			"ovr1", "ovr2", "ovr3", "ovr4",
+			"vp1", "vp2", "vp3", "vp4",
+			"wb";
+
+		clocks =	<&k3_clks 152 0>,
+				<&k3_clks 152 1>,
+				<&k3_clks 152 4>,
+				<&k3_clks 152 9>,
+				<&k3_clks 152 13>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 174 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 175 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 176 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b30000 0x0 0x2000>,
+			<0x0 0x02b38000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 177 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b40000 0x0 0x2000>,
+			<0x0 0x02b48000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 178 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp5: mcasp@2b50000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b50000 0x0 0x2000>,
+			<0x0 0x02b58000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 179 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp6: mcasp@2b60000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b60000 0x0 0x2000>,
+			<0x0 0x02b68000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 180 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp7: mcasp@2b70000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b70000 0x0 0x2000>,
+			<0x0 0x02b78000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 181 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp8: mcasp@2b80000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b80000 0x0 0x2000>,
+			<0x0 0x02b88000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 182 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp9: mcasp@2b90000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b90000 0x0 0x2000>,
+			<0x0 0x02b98000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 183 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp10: mcasp@2ba0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02ba0000 0x0 0x2000>,
+			<0x0 0x02ba8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 184 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcasp11: mcasp@2bb0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02bb0000 0x0 0x2000>,
+			<0x0 0x02bb8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 185 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	watchdog0: watchdog@2200000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2200000 0x0 0x100>;
+		clocks = <&k3_clks 252 1>;
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 252 1>;
+		assigned-clock-parents = <&k3_clks 252 5>;
+	};
+
+	watchdog1: watchdog@2210000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		clocks = <&k3_clks 253 1>;
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 253 1>;
+		assigned-clock-parents = <&k3_clks 253 5>;
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5c00000 0x00008000>,
+			      <0x5c10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "j7-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5d00000 0x00008000>,
+			      <0x5d10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <246>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 246 1>;
+			firmware-name = "j7-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@5e00000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+			 <0x5f00000 0x00 0x5f00000 0x20000>;
+		power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@5e00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5e00000 0x00008000>,
+			      <0x5e10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <247>;
+			ti,sci-proc-ids = <0x08 0xff>;
+			resets = <&k3_reset 247 1>;
+			firmware-name = "j7-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@5f00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5f00000 0x00008000>,
+			      <0x5f10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <248>;
+			ti,sci-proc-ids = <0x09 0xff>;
+			resets = <&k3_reset 248 1>;
+			firmware-name = "j7-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	c66_0: dsp@4d80800000 {
+		compatible = "ti,j721e-c66-dsp";
+		reg = <0x4d 0x80800000 0x00 0x00048000>,
+		      <0x4d 0x80e00000 0x00 0x00008000>,
+		      <0x4d 0x80f00000 0x00 0x00008000>;
+		reg-names = "l2sram", "l1pram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <142>;
+		ti,sci-proc-ids = <0x03 0xff>;
+		resets = <&k3_reset 142 1>;
+		firmware-name = "j7-c66_0-fw";
+	};
+
+	c66_1: dsp@4d81800000 {
+		compatible = "ti,j721e-c66-dsp";
+		reg = <0x4d 0x81800000 0x00 0x00048000>,
+		      <0x4d 0x81e00000 0x00 0x00008000>,
+		      <0x4d 0x81f00000 0x00 0x00008000>;
+		reg-names = "l2sram", "l1pram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <143>;
+		ti,sci-proc-ids = <0x04 0xff>;
+		resets = <&k3_reset 143 1>;
+		firmware-name = "j7-c66_1-fw";
+	};
+
+	c71_0: dsp@64800000 {
+		compatible = "ti,j721e-c71-dsp";
+		reg = <0x00 0x64800000 0x00 0x00080000>,
+		      <0x00 0x64e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <15>;
+		ti,sci-proc-ids = <0x30 0xff>;
+		resets = <&k3_reset 15 1>;
+		firmware-name = "j7-c71_0-fw";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/roms/u-boot/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
new file mode 100644
index 000000000..8750de7aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: dmsc@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x0 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x0 0x43000014 0x0 0x4>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x0 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 0>;
+		clock-names = "fclk";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+	};
+
+	wkup_gpio_intr: interrupt-controller2 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <137>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x42110000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <84>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x42100000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <84>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 0>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b10000 0x0 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 0>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x42120000 0x0 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 0>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+	};
+
+	fss: fss@47000000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x47000000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: hbmc-mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,j721e-hbmc", "ti,am654-hbmc";
+			reg = <0x0 0x47034000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+			assigned-clocks = <&k3_clks 102 0>;
+			assigned-clock-rates = <250000000>;
+		};
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 103 0>;
+			assigned-clocks = <&k3_clks 103 0>;
+			assigned-clock-parents = <&k3_clks 103 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 104 0>;
+			power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 1>;
+		assigned-clocks = <&k3_clks 1 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	mcu-navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 18 22>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 18 22>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 18 2>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x41000000 0x00008000>,
+			      <0x41010000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <250>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 250 1>;
+			firmware-name = "j7-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <251>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 251 1>;
+			firmware-name = "j7-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi b/roms/u-boot/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
new file mode 100644
index 000000000..f346bb316
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "k3-j721e-common-proc-board-u-boot.dtsi"
+
+/ {
+	chosen {
+		firmware-loader = &fs_loader0;
+	};
+
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a72_0;
+		remoteproc2 = &main_r5fss0_core0;
+		remoteproc3 = &main_r5fss0_core1;
+	};
+
+	fs_loader0: fs_loader@0 {
+		u-boot,dm-pre-reloc;
+		compatible = "u-boot,fs-loader";
+	};
+};
+
+&main_r5fss0 {
+	u-boot,dm-spl;
+};
+
+&main_r5fss0_core0 {
+	u-boot,dm-spl;
+};
+
+&main_r5fss0_core1 {
+	u-boot,dm-spl;
+};
+
+&tps659413a {
+	esm: esm {
+		compatible = "ti,tps659413-esm";
+		u-boot,dm-spl;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/roms/u-boot/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
new file mode 100644
index 000000000..4e8422e66
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721e-som-p0.dtsi"
+#include "k3-j721e-ddr-evm-lp4-4266.dtsi"
+#include "k3-j721e-ddr.dtsi"
+
+/ {
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a72_0;
+		remoteproc2 = &main_r5fss0_core0;
+		remoteproc3 = &main_r5fss0_core1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+	a72_0: a72@0 {
+		compatible = "ti,am654-rproc";
+		reg = <0x0 0x00a90000 0x0 0x10>;
+		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 202 TI_SCI_PD_EXCLUSIVE>;
+		resets = <&k3_reset 202 0>;
+		clocks = <&k3_clks 61 1>;
+		assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>;
+		assigned-clock-rates = <2000000000>, <200000000>;
+		ti,sci = <&dmsc>;
+		ti,sci-proc-id = <32>;
+		ti,sci-host-id = <10>;
+		u-boot,dm-spl;
+	};
+
+	clk_200mhz: dummy_clock_200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		u-boot,dm-spl;
+	};
+
+	clk_19_2mhz: dummy_clock_19_2mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+		u-boot,dm-spl;
+	};
+};
+
+&cbass_mcu_wakeup {
+	mcu_secproxy: secproxy@28380000 {
+		u-boot,dm-spl;
+		compatible = "ti,am654-secure-proxy";
+		reg = <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>,
+		      <0x0 0x2a480000 0x0 0x80000>;
+		reg-names = "rt", "scfg", "target_data";
+		#mbox-cells = <1>;
+	};
+
+	sysctrler: sysctrler {
+		u-boot,dm-spl;
+		compatible = "ti,am654-system-controller";
+		mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
+		mbox-names = "tx", "rx";
+	};
+
+	wkup_vtm0: wkup_vtm@42040000 {
+		compatible = "ti,am654-vtm", "ti,j721e-avs";
+		reg = <0x0 0x42040000 0x0 0x330>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
+
+&cbass_main {
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x0 0x700000 0x0 0x1000>;
+		ti,esm-pins = <344>, <345>;
+		u-boot,dm-spl;
+	};
+};
+
+&dmsc {
+	mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
+	mbox-names = "tx", "rx", "notify";
+	ti,host-id = <4>;
+	ti,secure-host;
+};
+
+&wkup_pmx0 {
+	wkup_uart0_pins_default: wkup_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xe8, PIN_INPUT, 0) /* (H29) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+		>;
+	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+			J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+			J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+			J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+			J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d4, PIN_INPUT, 1) /* (Y3) SPI1_CS0.UART0_CTSn */
+			J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	main_usbss0_pins_default: main_usbss0_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
+		>;
+	};
+
+	main_mmc1_pins_default: main_mmc1_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+			J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "okay";
+};
+
+&mcu_uart0 {
+	/delete-property/ power-domains;
+	/delete-property/ clocks;
+	/delete-property/ clock-names;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	status = "okay";
+	clock-frequency = <48000000>;
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_sdhci0 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+	non-removable;
+	bus-width = <8>;
+};
+
+&main_sdhci1 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+};
+
+&wkup_i2c0 {
+	u-boot,dm-spl;
+	tps659413a: tps659413a@48 {
+		reg = <0x48>;
+		compatible = "ti,tps659413";
+		u-boot,dm-spl;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wkup_i2c0_pins_default>;
+		clock-frequency = <400000>;
+
+		regulators: regulators {
+			u-boot,dm-spl;
+			buck12_reg: buck12 {
+				/*VDD_MPU*/
+				regulator-name = "buck12";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+				u-boot,dm-spl;
+			};
+		};
+	};
+};
+
+&wkup_vtm0 {
+	vdd-supply-2 = <&buck12_reg>;
+	u-boot,dm-spl;
+};
+
+&usbss0 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	clocks = <&clk_19_2mhz>;
+	clock-names = "usb2_refclk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	reg = <0x0 0x47040000 0x0 0x100>,
+	      <0x0 0x50000000 0x0 0x8000000>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <50000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+	u-boot,dm-spl;
+
+	reg = <0x0 0x47050000 0x0 0x100>,
+	      <0x0 0x58000000 0x0 0x8000000>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-spl;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e-som-p0.dtsi b/roms/u-boot/arch/arm/dts/k3-j721e-som-p0.dtsi
new file mode 100644
index 000000000..ebc0f5bbc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e-som-p0.dtsi
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (E20) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
+			J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C21) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (F19) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
+			J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* (E22) MCU_OSPI1_CSn1.MCU_HYPERBUS0_CSn1 */
+			J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (E19) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (D21) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D20) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (G19) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (G20) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (F20) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (F21) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (E21) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (B22) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (G21) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+		>;
+	};
+};
+
+&hbmc {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
+	ranges = <0x0 0x0 0x5 0x0 0x4000000>, /* 64MB Flash on CS0 */
+		 <0x1 0x0 0x5 0x4000000 0x800000>; /* 8MB RAM on CS1 */
+
+	flash@0,0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mailbox0_cluster0 {
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster5 {
+	status = "disabled";
+};
+
+&mailbox0_cluster6 {
+	status = "disabled";
+};
+
+&mailbox0_cluster7 {
+	status = "disabled";
+};
+
+&mailbox0_cluster8 {
+	status = "disabled";
+};
+
+&mailbox0_cluster9 {
+	status = "disabled";
+};
+
+&mailbox0_cluster10 {
+	status = "disabled";
+};
+
+&mailbox0_cluster11 {
+	status = "disabled";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/roms/u-boot/arch/arm/dts/k3-j721e.dtsi b/roms/u-boot/arch/arm/dts/k3-j721e.dtsi
new file mode 100644
index 000000000..84693fce6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/k3-j721e.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+	model = "Texas Instruments K3 J721E SoC";
+	compatible = "ti,j721e";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart3;
+		serial6 = &main_uart4;
+		serial7 = &main_uart5;
+		serial8 = &main_uart6;
+		serial9 = &main_uart7;
+		serial10 = &main_uart8;
+		serial11 = &main_uart9;
+		ethernet0 = &cpsw_port1;
+	};
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <2048>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
+			 <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
+			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
+			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+			 <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j721e-main.dtsi"
+#include "k3-j721e-mcu-wakeup.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/keystone-clocks.dtsi b/roms/u-boot/arch/arm/dts/keystone-clocks.dtsi
new file mode 100644
index 000000000..0c334b257
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-clocks.dtsi
@@ -0,0 +1,414 @@
+/*
+ * Device Tree Source for Keystone 2 clock tree
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclksys>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+	chipclk1: chipclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1";
+	};
+
+	chipclk1rstiso: chipclk1rstiso {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso";
+	};
+
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
+
+	chipstmxptclk: chipstmxptclk {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310164 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "chipstmxptclk";
+	};
+
+	chipclk12: chipclk12 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk12";
+	};
+
+	chipclk13: chipclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk13";
+	};
+
+	paclk13: paclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&papllclk>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "paclk13";
+	};
+
+	chipclk14: chipclk14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk14";
+	};
+
+	chipclk16: chipclk16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk16";
+	};
+
+	chipclk112: chipclk112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk112";
+	};
+
+	chipclk124: chipclk124 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <24>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk114";
+	};
+
+	chipclk1rstiso13: chipclk1rstiso13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso13";
+	};
+
+	chipclk1rstiso14: chipclk1rstiso14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso14";
+	};
+
+	chipclk1rstiso16: chipclk1rstiso16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso16";
+	};
+
+	chipclk1rstiso112: chipclk1rstiso112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso112";
+	};
+
+	clkmodrst0: clkmodrst0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "modrst0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemifspi: clkaemifspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "aemif-spi";
+		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkdebugsstrc: clkdebugsstrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "debugss-trc";
+		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clktetbtrc: clktetbtrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tetb-trc";
+		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clkpa: clkpa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&paclk13>;
+		clock-output-names = "pa";
+		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkcpgmac: clkcpgmac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "cpgmac";
+		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clksa: clksa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "sa";
+		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkpcie: clkpcie {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <3>;
+	};
+
+	clksr: clksr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso112>;
+		clock-output-names = "sr";
+		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <6>;
+	};
+
+	clkgem0: clkgem0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem0";
+		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <8>;
+	};
+
+	clkddr30: clkddr30 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "ddr3-0";
+		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clkwdtimer0: clkwdtimer0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer1: clkwdtimer1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer2: clkwdtimer2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer3: clkwdtimer3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clktimer15: clktimer15 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer15";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart0: clkuart0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart1: clkuart1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemif: clkaemif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "aemif";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkusim: clkusim {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "usim";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clki2c: clki2c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "i2c";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkspi: clkspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "spi";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkgpio: clkgpio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "gpio";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkkeymgr: clkkeymgr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "keymgr";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2e-clocks.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2e-clocks.dtsi
new file mode 100644
index 000000000..d56d68fe7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2e-clocks.dtsi
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkusb1: clkusb1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb1";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkpcie1: clkpcie1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie1";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi
new file mode 100644
index 000000000..c94165ffe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+	aliases {
+		usb0 = &usb;
+		usb1 = &usb1;
+	};
+};
+
+&i2c1 {
+	u-boot,dm-pre-reloc;
+};
+
+&usb_phy {
+	#phy-cells = <0>;
+	psc-domain = <2>;
+};
+
+&usb {
+	dwc3@2690000 {
+		phys = <&usb_phy>;
+		dr_mode = "host";
+		snps,u2ss_inp3_quirk;
+		status = "okay";
+	};
+};
+
+&usb1_phy {
+	#phy-cells = <0>;
+	psc-domain = <1>;
+};
+
+&usb1 {
+	dwc3@25010000 {
+		phys = <&usb1_phy>;
+		dr_mode = "peripheral";
+		snps,u2ss_inp3_quirk;
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2e-evm.dts b/roms/u-boot/arch/arm/dts/keystone-k2e-evm.dts
new file mode 100644
index 000000000..9288df21c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2e-evm.dts
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2e.dtsi"
+
+/ {
+	compatible =  "ti,k2e-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison EVM";
+
+	soc {
+
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	status = "ok";
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2e-netcp.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2e-netcp.dtsi
new file mode 100644
index 000000000..b13b3c94e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2e-netcp.dtsi
@@ -0,0 +1,206 @@
+/*
+ * Device Tree Source for Keystone 2 Edison Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x2000>;
+	linkram0	= <0x100000 0x4000>;
+	linkram1	= <0 0x10000>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <528 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <544 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <896 128>;
+				qalloc-by-id;
+			};
+		};
+	};
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000
+				 0x23a80000 0x23a90000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x24186000 0x100>,
+			  <0x24187000 0x2a0>,
+			  <0x24188000 0xb60>,
+			  <0x24186100 0x80>,
+			  <0x24189000 0x1000>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@24000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges = <0 0x24000000 0x1000000>;
+
+	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>,
+			<&dma_gbe 8>,
+			<&dma_gbe 0>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@200000 { /* ETHSS */
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-9";
+			reg = <0x200000 0x900>, <0x220000 0x20000>;
+			/* enable-ale; */
+			tx-queue = <896>;
+			tx-channel = "nettx";
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+				port-4 {
+					slave-port = <4>;
+					link-interface	= <2>;
+				};
+				port-5 {
+					slave-port = <5>;
+					link-interface	= <2>;
+				};
+				port-6 {
+					slave-port = <6>;
+					link-interface	= <2>;
+				};
+				port-7 {
+					slave-port = <7>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <528>;
+			tx-completion-queue = <530>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <529>;
+			tx-completion-queue = <531>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 00];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2e.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2e.dtsi
new file mode 100644
index 000000000..b5d906184
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2e.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison soc device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		/include/ "keystone-k2e-clocks.dtsi"
+
+		usb: usb@2680000 {
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			dwc3@2690000 {
+				interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		usb1_phy: usb_phy@2620750 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620750 24>;
+			status = "disabled";
+		};
+
+		usb1: usb@25000000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x25000000 0x10000>;
+			clocks = <&clkusb1>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+
+			dwc3@25010000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x25010000 0x70000>;
+				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb1_phy>, <&usb1_phy>;
+			};
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		pcie1: pcie@21020000 {
+			compatible = "ti,keystone-pcie","snps,dw-pcie";
+			clocks = <&clkpcie1>;
+			clock-names = "pcie";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg =  <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+			ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
+				0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+
+			status = "disabled";
+			device_type = "pci";
+			num-lanes = <2>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
+					<0 0 0 2 &pcie_intc1 1>, /* INT B */
+					<0 0 0 3 &pcie_intc1 2>, /* INT C */
+					<0 0 0 4 &pcie_intc1 3>; /* INT D */
+
+			pcie_msi_intc1: msi-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 379 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 380 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 381 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 382 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 383 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 384 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			pcie_intc1: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		mdio: mdio@24200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x24200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
+		/include/ "keystone-k2e-netcp.dtsi"
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2g-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2g-evm-u-boot.dtsi
new file mode 100644
index 000000000..e8e70096e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2g-evm-u-boot.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+	aliases {
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c1 {
+	u-boot,dm-pre-reloc;
+};
+
+&usb0_phy {
+	compatible = "ti,keystone-usbphy";
+	#phy-cells = <0>;
+	reg = <0x2620738 24>;
+	psc-domain = <25>;
+};
+
+&usb0 {
+	phys = <&usb0_phy>;
+	snps,u2ss_inp3_quirk;
+};
+
+&usb1_phy {
+	compatible = "ti,keystone-usbphy";
+	#phy-cells = <0>;
+	reg = <0x2620750 24>;
+	psc-domain = <26>;
+};
+
+&usb1 {
+	phys = <&usb1_phy>;
+	snps,u2ss_inp3_quirk;
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2g-evm.dts b/roms/u-boot/arch/arm/dts/keystone-k2g-evm.dts
new file mode 100644
index 000000000..b5b511cbd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2g-evm.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Device Tree Source for K2G EVM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+
+/ {
+	compatible =  "ti,k2g-evm","ti,keystone";
+	model = "Texas Instruments K2G General Purpose EVM";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&keystone_usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&keystone_usb1 {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&gbe0 {
+	phy-handle = <&ethphy0>;
+};
+
+&netcp {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: m25p80@0 {
+		compatible = "s25fl512s","jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <96000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cdns,tshsl-ns = <392>;
+		cdns,tsd2d-ns = <392>;
+		cdns,tchsh-ns = <100>;
+		cdns,tslch-ns = <100>;
+		block-size = <18>;
+
+		partition@0 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot-env";
+			reg = <0x00100000 0x00040000>;
+		};
+		partition@2 {
+			label = "QSPI.skern";
+			reg = <0x00140000 0x0040000>;
+		};
+		partition@3 {
+			label = "QSPI.pmmc-firmware";
+			reg = <0x00180000 0x0040000>;
+		};
+		partition@4 {
+			label = "QSPI.kernel";
+			reg = <0x001C0000 0x0800000>;
+		};
+		partition@5 {
+			label = "QSPI.file-system";
+			reg = <0x009C0000 0x3640000>;
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2g-generic-u-boot.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2g-generic-u-boot.dtsi
new file mode 100644
index 000000000..80f1f6004
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2g-generic-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2g-generic.dts b/roms/u-boot/arch/arm/dts/keystone-k2g-generic.dts
new file mode 100644
index 000000000..fc938a4ba
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2g-generic.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree Source for Generic 66AK2G0X EVM
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+
+/ {
+	compatible = "ti,k2g-generic", "ti,k2g", "ti,keystone";
+	model = "Texas Instruments 66AK2G02 Generic";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&i2c0 {
+        status = "okay";
+};
+
+&i2c1 {
+        status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2g-ice-u-boot.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2g-ice-u-boot.dtsi
new file mode 100644
index 000000000..80f1f6004
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2g-ice-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2g-ice.dts b/roms/u-boot/arch/arm/dts/keystone-k2g-ice.dts
new file mode 100644
index 000000000..ecca2dfac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2g-ice.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree Source for K2G Industrial Communication Engine EVM
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
+	model = "Texas Instruments K2G Industrial Communication EVM";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: m25p80@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <96000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cdns,read-delay = <5>;
+		cdns,tshsl-ns = <500>;
+		cdns,tsd2d-ns = <500>;
+		cdns,tchsh-ns = <119>;
+		cdns,tslch-ns = <119>;
+
+		partition@0 {
+			label = "QSPI.u-boot";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot-env";
+			reg = <0x00100000 0x00040000>;
+		};
+		partition@2 {
+			label = "QSPI.skern";
+			reg = <0x00140000 0x0040000>;
+		};
+		partition@3 {
+			label = "QSPI.pmmc-firmware";
+			reg = <0x00180000 0x0040000>;
+		};
+		partition@4 {
+			label = "QSPI.kernel";
+			reg = <0x001c0000 0x0800000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x009c0000 0x0040000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x00a00000 0x1600000>;
+		};
+	};
+};
+
+&qmss {
+	status = "okay";
+};
+
+&knav_dmas {
+	status = "okay";
+};
+
+&netcp {
+	pinctrl-names = "default";
+	//pinctrl-0 = <&emac_pins>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	//pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gbe0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2g-netcp.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2g-netcp.dtsi
new file mode 100644
index 000000000..d76f2a1ba
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2g-netcp.dtsi
@@ -0,0 +1,152 @@
+/*
+ * Device Tree Source for K2G Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@4020000 {
+	compatible = "ti,keystone-navigator-qmss-l";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/* power-domains = <&k2g_pds K2G_DEV_NSS0>; */
+	/* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_VCLK>; */
+	clock-names = "nss_vclk";
+	ranges;
+	queue-range	= <0 0x80>;
+	linkram0	= <0x4020000 0x7ff>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x80>;
+			reg = <0x4100000 0x800>,
+			      <0x4040000 0x100>,
+			      <0x4080000 0x800>,
+			      <0x40c0000 0x800>;
+			reg-names = "peek", "config",
+				    "region", "push";
+		};
+
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <77 8>;
+				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
+					     0 311 0xf04 0 312 0xf04 0 313 0xf04
+					     0 314 0xf04 0 315 0xf04>;
+				qalloc-by-id;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <112 8>;
+			};
+			netcp-tx {
+				qrange = <5 8>;
+				qalloc-by-id;
+			};
+		};
+	};
+
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <1023 128>; /* num_desc desc_size */
+			link-index = <0x400>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/* power-domains = <&k2g_pds K2G_DEV_NSS0>; */
+	/* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_VCLK>; */
+	clock-names = "nss_vclk";
+	ranges;
+	ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x4010000 0x100>,
+			  <0x4011000 0x2a0>, /* 21 Tx channels */
+			  <0x4012000 0x400>, /* 32 Rx channels */
+			  <0x4010100 0x80>,
+			  <0x4013000 0x400>; /* 32 Rx flows */
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+
+};
+
+gbe_subsys: subsys@4200000 {
+	compatible = "syscon";
+	reg = <0x4200000 0x100>;
+};
+
+netcp: netcp@4000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	status = "disabled";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/* power-domains = <&k2g_pds K2G_DEV_NSS0>; */
+	/* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_ESW_CLK>; */
+	clock-names = "ethss_clk";
+
+	/* NetCP address range */
+	ranges = <0 0x4000000 0x1000000>;
+
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>;
+	ti,navigator-dma-names = "netrx0", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@200000 {
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-2";
+			syscon-subsys = <&gbe_subsys>;
+			reg = <0x200100 0xe00>, <0x220000 0x20000>;
+			/* enable-ale; */
+			tx-queue = <5>;
+			tx-channel = "nettx";
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <5>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <512 12>;
+			tx-pool = <511 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <77>;
+			tx-completion-queue = <78>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2g.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2g.dtsi
new file mode 100644
index 000000000..ede711812
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2g.dtsi
@@ -0,0 +1,261 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Device Tree Source for K2G SOC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Texas Instruments K2G SoC";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	chosen { };
+
+	aliases {
+		serial0	= &uart0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &qspi;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x02561000 0x0 0x1000>,
+		      <0x0 0x02562000 0x0 0x2000>,
+		      <0x0 0x02564000 0x0 0x1000>,
+		      <0x0 0x02566000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,keystone","simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@02530c00 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02530c00 0x100>;
+			clock-names = "uart";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		mdio: mdio@4200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* power-domains = <&k2g_pds K2G_DEV_NSS0>; */
+			/* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_ESW_CLK>; */
+			clock-names = "fck";
+			reg = <0x04200f00 0x100>;
+			status = "disabled";
+			bus_freq = <2500000>;
+		};
+
+		qspi: qspi@2940000 {
+			compatible =  "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02940000 0x1000>,
+			      <0x24000000 0x4000000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+			num-cs = <4>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x24000000>;
+			status = "disabled";
+		};
+
+		#include "keystone-k2g-netcp.dtsi"
+
+		pmmc: pmmc@2900000 {
+			compatible = "ti,power-processor";
+			reg = <0x02900000 0x40000>;
+			ti,lpsc_module = <1>;
+		};
+
+		spi0: spi@21805400 {
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
+			reg = <0x21805400 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@21805800 {
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
+			reg = <0x21805800 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@21805c00 {
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
+			reg = <0x21805C00 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@21806000 {
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
+			reg = <0x21806000 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		i2c0: i2c@2530000 {
+			compatible = "ti,keystone-i2c";
+			reg = <0x02530000 0x400>;
+			clock-frequency = <100000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2530400 {
+			compatible = "ti,keystone-i2c";
+			reg = <0x02530400 0x400>;
+			clock-frequency = <100000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2530800 {
+			compatible = "ti,keystone-i2c";
+			reg = <0x02530800 0x400>;
+			clock-frequency = <100000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@23000000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x23000000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
+			bus-width = <4>;
+			ti,needs-special-reset;
+			no-1-8-v;
+			max-frequency = <96000000>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@23100000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x23100000 0x400>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+			bus-width = <8>;
+			ti,needs-special-reset;
+			ti,non-removable;
+			max-frequency = <96000000>;
+			status = "disabled";
+			clock-names = "fck";
+		};
+
+		usb0_phy: usb-phy@0 {
+			compatible = "usb-nop-xceiv";
+			status = "disabled";
+		};
+
+		keystone_usb0: keystone-dwc3@2680000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2680000 0x10000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+			/*power-domains = <&k2g_pds 0x0016>;*/
+
+			usb0: usb@2690000 {
+				compatible = "snps,dwc3";
+				reg = <0x2690000 0x10000>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				/*usb-phy = <&usb0_phy>;*/
+				status = "disabled";
+			};
+		};
+
+		usb1_phy: usb-phy@1 {
+			compatible = "usb-nop-xceiv";
+			status = "disabled";
+		};
+
+		keystone_usb1: keystone-dwc3@2580000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2580000 0x10000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+			/*power-domains = <&k2g_pds 0x0017>;*/
+
+			usb1: usb@2590000 {
+				compatible = "snps,dwc3";
+				reg = <0x2590000 0x10000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				/*usb-phy = <&usb1_phy>;*/
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2hk-clocks.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2hk-clocks.dtsi
new file mode 100644
index 000000000..af9b71905
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2hk-clocks.dtsi
@@ -0,0 +1,425 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkarm>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	ddr3bpllclk: ddr3bpllclk@2620368 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3b>;
+		clock-output-names = "ddr-3b-pll-clk";
+		reg = <0x02620368 4>;
+		reg-names = "control";
+	};
+
+	clktsip: clktsip {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "tsip";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clksrio: clksrio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso13>;
+		clock-output-names = "srio";
+		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clkgem4: clkgem4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem4";
+		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <12>;
+	};
+
+	clkgem5: clkgem5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem5";
+		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <13>;
+	};
+
+	clkgem6: clkgem6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem6";
+		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <14>;
+	};
+
+	clkgem7: clkgem7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem7";
+		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <15>;
+	};
+
+	clkddr31: clkddr31 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "ddr3-1";
+		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac01: clkrac01 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-01";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac23: clkrac23 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-23";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc2: clkfftc2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-2";
+		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc3: clkfftc3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-3";
+		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc4: clkfftc4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-4";
+		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc5: clkfftc5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-5";
+		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkaif: clkaif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "aif";
+		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d2: clktcp3d2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-2";
+		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clktcp3d3: clktcp3d3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-3";
+		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp4: clkvcp4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-4";
+		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp5: clkvcp5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-5";
+		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp6: clkvcp6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-6";
+		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp7: clkvcp7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-7";
+		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdxb: clkdxb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dxb";
+		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkhyperlink1: clkhyperlink1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-1";
+		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2hk-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2hk-evm-u-boot.dtsi
new file mode 100644
index 000000000..1c2f349f5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2hk-evm-u-boot.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&i2c1 {
+	u-boot,dm-pre-reloc;
+};
+
+&usb_phy {
+	#phy-cells = <0>;
+	psc-domain = <2>;
+};
+
+&usb {
+	dwc3@2690000 {
+		phys = <&usb_phy>;
+		dr_mode = "host";
+		snps,u2ss_inp3_quirk;
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2hk-evm.dts b/roms/u-boot/arch/arm/dts/keystone-k2hk-evm.dts
new file mode 100644
index 000000000..84c58d75a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2hk-evm.dts
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2hk.dtsi"
+
+/ {
+	compatible =  "ti,k2hk-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
+
+	soc {
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkarm: refclkarm {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <125000000>;
+				clock-output-names = "refclk-arm";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+
+			refclkddr3b: refclkddr3b {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3b";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug1_1 {
+			label = "keystone:green:debug1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+		};
+
+		debug1_2 {
+			label = "keystone:red:debug1";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+		};
+
+		debug2 {
+			label = "keystone:blue:debug2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+		};
+
+		debug3 {
+			label = "keystone:blue:debug3";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1fe80000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	status = "ok";
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2hk-netcp.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2hk-netcp.dtsi
new file mode 100644
index 000000000..77a32c3c1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2hk-netcp.dtsi
@@ -0,0 +1,208 @@
+/*
+ * Device Tree Source for Keystone 2 Hawking Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x4000>;
+	linkram0	= <0x100000 0x8000>;
+	linkram1	= <0x0 0x10000>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+
+		qmgr1 {
+			managed-queues = <0x2000 0x2000>;
+			reg = <0x2a60000 0x20000>,
+			      <0x2a06400 0x400>,
+			      <0x2a04000 0x1000>,
+			      <0x2a05000 0x1000>,
+			      <0x23aa0000 0x20000>,
+			      <0x2aa0000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <8704 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <8720 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <640 9>;
+				qalloc-by-id;
+			};
+			netcpx-tx {
+				qrange = <8752 8>;
+				qalloc-by-id;
+			};
+		};
+	};
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000
+				   0x23aa0000 0x23ab0000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x2004000 0x100>,
+			  <0x2004400 0x120>,
+			  <0x2004800 0x300>,
+			  <0x2004c00 0x120>,
+			  <0x2005000 0x400>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@2000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges  = <0 0x2000000 0x100000>;
+
+	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 22>,
+			<&dma_gbe 23>,
+			<&dma_gbe 8>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gbe@90000 { /* ETHSS */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe";
+			reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
+			/* enable-ale; */
+			tx-queue = <648>;
+			tx-channel = "nettx";
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface = <1>;
+					phy-handle = <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface = <1>;
+					phy-handle = <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8704>;
+			tx-completion-queue = <8706>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8705>;
+			tx-completion-queue = <8707>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 6f];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2hk.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2hk.dtsi
new file mode 100644
index 000000000..fc7869683
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2hk.dtsi
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking soc specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		/include/ "keystone-k2hk-clocks.dtsi"
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		dspgpio1: keystone_dsp_gpio@2620244 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x244>;
+		};
+
+		dspgpio2: keystone_dsp_gpio@2620248 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x248>;
+		};
+
+		dspgpio3: keystone_dsp_gpio@262024c {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x24c>;
+		};
+
+		dspgpio4: keystone_dsp_gpio@2620250 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x250>;
+		};
+
+		dspgpio5: keystone_dsp_gpio@2620254 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x254>;
+		};
+
+		dspgpio6: keystone_dsp_gpio@2620258 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x258>;
+		};
+
+		dspgpio7: keystone_dsp_gpio@262025c {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x25c>;
+		};
+
+		mdio: mdio@02090300 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02090300 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
+		/include/ "keystone-k2hk-netcp.dtsi"
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2l-clocks.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2l-clocks.dtsi
new file mode 100644
index 000000000..ef8464bb1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2l-clocks.dtsi
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 lamarr SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkdfeiqnsys: clkdfeiqnsys {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "dfe";
+		reg-names = "control", "domain";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		domain-id = <0>;
+	};
+
+	clkpcie1: clkpcie1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac: clkrac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkdfepd0: clkdfepd0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd0";
+		reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkosr: clkosr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "osr";
+		reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350094 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdfepd1: clkdfepd1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd1";
+		reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkiqnail: clkiqnail {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "iqn-ail";
+		reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	clkuart2: clkuart2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart3: clkuart3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2l-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2l-evm-u-boot.dtsi
new file mode 100644
index 000000000..0a507d021
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2l-evm-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&usb_phy {
+	#phy-cells = <0>;
+	psc-domain = <2>;
+};
+
+&usb {
+	dwc3@2690000 {
+		phys = <&usb_phy>;
+		dr_mode = "host";
+		snps,u2ss_inp3_quirk;
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2l-evm.dts b/roms/u-boot/arch/arm/dts/keystone-k2l-evm.dts
new file mode 100644
index 000000000..91cefdf2a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2l-evm.dts
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2l.dtsi"
+
+/ {
+	compatible =  "ti,k2l-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Lamarr EVM";
+
+	soc {
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x7FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	status ="okay";
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	status = "ok";
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2l-netcp.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2l-netcp.dtsi
new file mode 100644
index 000000000..6b95284d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2l-netcp.dtsi
@@ -0,0 +1,189 @@
+/*
+ * Device Tree Source for Keystone 2 Lamarr Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x2000>;
+	linkram0	= <0x100000 0x4000>;
+	linkram1	= <0x70000000 0x10000>; /* 1MB OSR mem */
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <528 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <544 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <896 128>;
+				qalloc-by-id;
+			};
+		};
+	};
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x26186000 0x100>,
+			  <0x26187000 0x2a0>,
+			  <0x26188000 0xb60>,
+			  <0x26186100 0x80>,
+			  <0x26189000 0x1000>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@26000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges = <0 0x26000000 0x1000000>;
+
+	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>,
+			<&dma_gbe 8>,
+			<&dma_gbe 0>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@200000 { /* ETHSS */
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-5";
+			reg = <0x200000 0x900>, <0x220000 0x20000>;
+			/* enable-ale; */
+			tx-queue = <896>;
+			tx-channel = "nettx";
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <528>;
+			tx-completion-queue = <530>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <529>;
+			tx-completion-queue = <531>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 7f];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone-k2l.dtsi b/roms/u-boot/arch/arm/dts/keystone-k2l.dtsi
new file mode 100644
index 000000000..d681cab25
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone-k2l.dtsi
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		/include/ "keystone-k2l-clocks.dtsi"
+
+		uart2: serial@02348400 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348400 0x100>;
+			clocks	= <&clkuart2>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart3:	serial@02348800 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348800 0x100>;
+			clocks	= <&clkuart3>;
+			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		dspgpio1: keystone_dsp_gpio@2620244 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x244>;
+		};
+
+		dspgpio2: keystone_dsp_gpio@2620248 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x248>;
+		};
+
+		dspgpio3: keystone_dsp_gpio@262024c {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x24c>;
+		};
+
+		mdio: mdio@26200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x26200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
+		/include/ "keystone-k2l-netcp.dtsi"
+	};
+};
+
+&spi0 {
+       ti,davinci-spi-num-cs = <5>;
+};
+
+&spi1 {
+       ti,davinci-spi-num-cs = <3>;
+};
+
+&spi2 {
+       ti,davinci-spi-num-cs = <5>;
+       /* Pin muxed. Enabled and configured by Bootloader */
+       status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/keystone.dtsi b/roms/u-boot/arch/arm/dts/keystone.dtsi
new file mode 100644
index 000000000..9a2e1f69b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/keystone.dtsi
@@ -0,0 +1,333 @@
+/*
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Texas Instruments Keystone 2 SoC";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	= &uart0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	gic: interrupt-controller {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x02561000 0x1000>,
+		      <0x02562000 0x2000>,
+		      <0x02564000 0x1000>,
+		      <0x02566000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,keystone","simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pllctrl: pll-controller@02310000 {
+			compatible = "ti,keystone-pllctrl", "syscon";
+			reg = <0x02310000 0x200>;
+		};
+
+		devctrl: device-state-control@02620000 {
+			compatible = "ti,keystone-devctrl", "syscon";
+			reg = <0x02620000 0x1000>;
+		};
+
+		rstctrl: reset-controller {
+			compatible = "ti,keystone-reset";
+			ti,syscon-pll = <&pllctrl 0xe4>;
+			ti,syscon-dev = <&devctrl 0x328>;
+			ti,wdt-list = <0>;
+		};
+
+		/include/ "keystone-clocks.dtsi"
+
+		uart0: serial@02530c00 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02530c00 0x100>;
+			clocks	= <&clkuart0>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart1:	serial@02531000 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02531000 0x100>;
+			clocks	= <&clkuart1>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		i2c0: i2c@2530000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530000 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2530400 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530400 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2530800 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530800 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@21000400 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000400 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@21000600 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000600 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi2: spi@21000800 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000800 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_phy: usb_phy@2620738 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620738 24>;
+			status = "disabled";
+		};
+
+		usb: usb@2680000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2680000 0x10000>;
+			clocks = <&clkusb>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+
+			dwc3@2690000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x2690000 0x70000>;
+				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb_phy>, <&usb_phy>;
+			};
+		};
+
+		wdt: wdt@022f0080 {
+			compatible = "ti,keystone-wdt","ti,davinci-wdt";
+			reg = <0x022f0080 0x80>;
+			clocks = <&clkwdtimer0>;
+		};
+
+		clock_event: timer@22f0000 {
+			compatible = "ti,keystone-timer";
+			reg = <0x022f0000 0x80>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clktimer15>;
+		};
+
+		gpio0: gpio@260bf00 {
+			compatible = "ti,keystone-gpio";
+			reg = <0x0260bf00 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* HW Interrupts mapped to GPIO pins */
+			interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkgpio>;
+			clock-names = "gpio";
+			ti,ngpio = <32>;
+			ti,davinci-gpio-unbanked = <32>;
+		};
+
+		aemif: aemif@21000A00 {
+			compatible = "ti,keystone-aemif", "ti,davinci-aemif";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clocks = <&clkaemif>;
+			clock-names = "aemif";
+			clock-ranges;
+
+			reg = <0x21000A00 0x00000100>;
+			ranges = <0 0 0x30000000 0x10000000
+				  1 0 0x21000A00 0x00000100>;
+		};
+
+		kirq0: keystone_irq@26202a0 {
+			compatible = "ti,keystone-irq";
+			interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,syscon-dev = <&devctrl 0x2a0>;
+		};
+
+		pcie0: pcie@21800000 {
+			compatible = "ti,keystone-pcie", "snps,dw-pcie";
+			clocks = <&clkpcie>;
+			clock-names = "pcie";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg =  <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+			ranges = <0x81000000 0 0 0x23250000 0 0x4000
+				0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+
+			status = "disabled";
+			device_type = "pci";
+			num-lanes = <2>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
+					<0 0 0 2 &pcie_intc0 1>, /* INT B */
+					<0 0 0 3 &pcie_intc0 2>, /* INT C */
+					<0 0 0 4 &pcie_intc0 3>; /* INT D */
+
+			pcie_msi_intc0: msi-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			pcie_intc0: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-6192.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-6192.dtsi
new file mode 100644
index 000000000..396bcba08
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-6192.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6192-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-6281.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-6281.dtsi
new file mode 100644
index 000000000..faa05849a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-6281.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6281-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-98dx4122.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-98dx4122.dtsi
new file mode 100644
index 000000000..299c14729
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-98dx4122.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,98dx4122-pinctrl";
+
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-atl-sbx81lifkw.dts b/roms/u-boot/arch/arm/dts/kirkwood-atl-sbx81lifkw.dts
new file mode 100644
index 000000000..4ae74f431
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-atl-sbx81lifkw.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Allied Telesis SBx81LIFKW Board";
+	compatible = "atl,SBx81LIFKW", "marvell,kirkwood-88f6281",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		i2c0 = &i2c0;
+		spi0 = &spi0;
+	};
+
+	dsa {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		dsa,ethernet = <&eth0>;
+		dsa,mii-bus = <&mdio>;
+		status = "okay";
+
+		switch@0 {
+			#address-cells =  <1>;
+			#size-cells = <0>;
+			reg = <1 0>;
+
+			port@0 {
+				reg = <0>;
+				label = "internal0";
+			};
+			port@1 {
+				reg = <1>;
+				label = "internal1";
+			};
+			port@8 {
+				reg = <8>;
+				label = "internal8";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			port@9 {
+				reg = <9>;
+				label = "internal9";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			port@10 {
+				reg = <10>;
+				label = "cpu";
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		mode = <0>;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00c00000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00c00000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00100000 0x00f00000>;
+			label = "unused";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts b/roms/u-boot/arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts
new file mode 100644
index 000000000..6e3418f24
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+
+/ {
+	model = "Allied Telesis SBx81LIFXCAT Board";
+	compatible = "atl,SBx8LIFXCAT", "marvell,kirkwood-98DX4122",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		i2c0 = &i2c0;
+		spi0 = &spi0;
+	};
+
+	dsa {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		dsa,ethernet = <&eth0>;
+		dsa,mii-bus = <&mdio>;
+		status = "okay";
+
+		switch@0 {
+			#address-cells =  <1>;
+			#size-cells = <0>;
+			reg = <1 0>;
+
+			port@0 {
+				reg = <0>;
+				label = "internal0";
+			};
+			port@1 {
+				reg = <1>;
+				label = "internal1";
+			};
+			port@8 {
+				reg = <8>;
+				label = "internal8";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			port@9 {
+				reg = <9>;
+				label = "internal9";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			port@10 {
+				reg = <10>;
+				label = "cpu";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		ledn {
+			label = "status:ledn";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		ledp {
+			label = "status:ledp";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		mode = <0>;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00c00000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00c00000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00100000 0x00f00000>;
+			label = "unused";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+
+	gpio3: gpio@76 {
+		#gpio-cells = <2>;
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-blackarmor-nas220.dts b/roms/u-boot/arch/arm/dts/kirkwood-blackarmor-nas220.dts
new file mode 100644
index 000000000..07fbfca44
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-blackarmor-nas220.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Seagate Blackarmor NAS220
+ *
+ * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Seagate Blackarmor NAS220";
+	compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
+		     "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		button {
+			label = "Power";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-power {
+			label = "nas220:blue:power";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/*
+ * Serial port routed to connector CN5
+ *
+ * pin 1 - TX (CPU's TX)
+ * pin 4 - RX (CPU's RX)
+ * pin 6 - GND
+ */
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
+	pinctrl-names = "default";
+
+	pmx_act_sata0: pmx-act-sata0 {
+		marvell,pins = "mpp15";
+		marvell,function = "sata0";
+	};
+
+	pmx_act_sata1: pmx-act-sata1 {
+		marvell,pins = "mpp16";
+		marvell,function = "sata1";
+	};
+
+	pmx_power_sata0: pmx-power-sata0 {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_sata1: pmx-power-sata1 {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_reset: pmx-button-reset {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_power: pmx-button-power {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	adt7476: thermal@2e {
+		compatible = "adi,adt7476";
+		reg = <0x2e>;
+	};
+};
+
+&nand {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		 reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-d2net-u-boot.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-d2net-u-boot.dtsi
new file mode 100644
index 000000000..1f3b18547
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-d2net-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-d2net.dts b/roms/u-boot/arch/arm/dts/kirkwood-d2net.dts
new file mode 100644
index 000000000..bd3b266dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-d2net.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for d2 Network v2
+ *
+ * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
+ *
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie d2 Network v2";
+	compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "d2net_v2:blue:sata";
+			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "d2net_v2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-dns325.dts b/roms/u-boot/arch/arm/dts/kirkwood-dns325.dts
new file mode 100644
index 000000000..94d9c06cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-dns325.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-dnskw.dtsi"
+
+/ {
+	model = "D-Link DNS-325 NAS (Rev A1)";
+	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
+			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+			     &pmx_led_white_usb>;
+		pinctrl-names = "default";
+
+		white-power {
+			label = "dns325:white:power";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		white-usb {
+			label = "dns325:white:usb";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
+		};
+		red-l_hdd {
+			label = "dns325:red:l_hdd";
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		red-r_hdd {
+			label = "dns325:red:r_hdd";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+		red-usb {
+			label = "dns325:red:usb";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm75: lm75@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-dnskw.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-dnskw.dtsi
new file mode 100644
index 000000000..cbaf06f2f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-dnskw.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DNS NASes (kirkwood-based)";
+	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+		eject {
+			label = "USB unmount button";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
+			 &gpio1 13 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
+				     &pmx_present_sata1 &pmx_fan_tacho
+				     &pmx_temp_alarm>;
+			pinctrl-names = "default";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_325: pmx-led-red-usb-325 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_320: pmx-led-red-usb-320 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_power_back_on: pmx-power-back-on {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata0: pmx-power-sata0 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata1: pmx-power-sata1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata0: pmx-present-sata0 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata1: pmx-present-sata1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_white_usb: pmx-led-white-usb {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_fan_tacho: pmx-fan-tacho {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high_speed: pmx-fan-high-speed {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low_speed: pmx-fan-low-speed {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_button_unmount: pmx-button-unmount {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_temp_alarm: pmx-temp-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 7 0>;
+		};
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 8 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x500000>;
+	};
+
+	partition@600000 {
+		label = "ramdisk";
+		reg = <0x0600000 0x500000>;
+	};
+
+	partition@b00000 {
+		label = "image";
+		reg = <0x0b00000 0x6600000>;
+	};
+
+	partition@7100000 {
+		label = "mini firmware";
+		reg = <0x7100000 0xa00000>;
+	};
+
+	partition@7b00000 {
+		label = "config";
+		reg = <0x7b00000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-dockstar.dts b/roms/u-boot/arch/arm/dts/kirkwood-dockstar.dts
new file mode 100644
index 000000000..6a3f1bf6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-dockstar.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led-orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x0500000 0xfb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88e1116";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-dreamplug.dts b/roms/u-boot/arch/arm/dts/kirkwood-dreamplug.dts
new file mode 100644
index 000000000..e9eea22fc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-dreamplug.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Dreamplug";
+	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_bluetooth: pmx-led-bluetooth {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi: pmx-led-wifi {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi_ap: pmx-led-wifi-ap {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@100000 {
+					reg = <0x100000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@180000 {
+					reg = <0x180000 0x10000>;
+					label = "dtb";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
+			     &pmx_led_wifi_ap >;
+		pinctrl-names = "default";
+
+		bluetooth {
+			label = "dreamplug:blue:bluetooth";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wifi {
+			label = "dreamplug:green:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wifi-ap {
+			label = "dreamplug:green:wifi_ap";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ds109.dts b/roms/u-boot/arch/arm/dts/kirkwood-ds109.dts
new file mode 100644
index 000000000..29982e7ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ds109.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS109, DS110, DS110jv20";
+	compatible = "synology,ds109", "synology,ds110jv20",
+		     "synology,ds110", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-goflexnet.dts b/roms/u-boot/arch/arm/dts/kirkwood-goflexnet.dts
new file mode 100644
index 000000000..02d87e0a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-goflexnet.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Seagate GoFlex Net";
+	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_0: pmx-led_right_cap_0 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_1: pmx-led_right_cap_1 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_2: pmx-led_right_cap_2 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_3: pmx-led_right_cap_3 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_0: pmx-led_left_cap_0 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_1: pmx-led_left_cap_1 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_2: pmx-led_left_cap_2 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_3: pmx-led_left_cap_3 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led_green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led_orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_orange
+			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
+			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
+			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
+			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
+			    >;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		left0 {
+			label = "status:white:left0";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		left1 {
+			label = "status:white:left1";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		left2 {
+			label = "status:white:left2";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+		left3 {
+			label = "status:white:left3";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		right0 {
+			label = "status:white:right0";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+		right1 {
+			label = "status:white:right1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		right2 {
+			label = "status:white:right2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+		right3 {
+			label = "status:white:right3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0xd800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-guruplug-server-plus.dts b/roms/u-boot/arch/arm/dts/kirkwood-guruplug-server-plus.dts
new file mode 100644
index 000000000..ff1260ee3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-guruplug-server-plus.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Guruplug Server Plus";
+	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_health_r: pmx-led-health-r {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_g: pmx-led-health-g {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_r: pmx-led-wmode-r {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_g: pmx-led-wmode-g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		/* AzureWave AW-GH381 WiFi/BT */
+		mvsdio@90000 {
+			status = "okay";
+			non-removable;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
+			      &pmx_led_wmode_r &pmx_led_wmode_g >;
+		pinctrl-names = "default";
+
+		health-r {
+			label = "guruplug:red:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		health-g {
+			label = "guruplug:green:health";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wmode-r {
+			label = "guruplug:red:wmode";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wmode-g {
+			label = "guruplug:green:wmode";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ib62x0.dts b/roms/u-boot/arch/arm/dts/kirkwood-ib62x0.dts
new file mode 100644
index 000000000..962a910a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ib62x0.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_os_red: pmx-led-os-red {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_os_green: pmx-led-os-green {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb_transfer: pmx-led-usb-transfer {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_button_usb_copy: pmx-button-usb-copy {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
+			     &pmx_led_usb_transfer>;
+		pinctrl-names = "default";
+
+		green-os {
+			label = "ib62x0:green:os";
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		red-os {
+			label = "ib62x0:red:os";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+		usb-copy {
+			label = "ib62x0:red:usb_copy";
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-iconnect.dts b/roms/u-boot/arch/arm/dts/kirkwood-iconnect.dts
new file mode 100644
index 000000000..4a512d809
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-iconnect.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Iomega Iconnect";
+	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+		linux,initrd-start = <0x4500040>;
+		linux,initrd-end   = <0x4800000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_level: pmx-led-level {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_blue: pmx-led-power-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_red: pmx-power-red {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb1: pmx-led-usb1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb2: pmx-led-usb2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb3: pmx-led-usb3 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb4: pmx-led-usb4 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_otb: pmx-led-otb {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
+			      &pmx_led_power_red &pmx_led_usb1
+			      &pmx_led_usb2 &pmx_led_usb3
+			      &pmx_led_usb4 &pmx_led_otb >;
+		pinctrl-names = "default";
+
+		led-level {
+			label = "led_level";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		power-blue {
+			label = "power:blue";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		usb1 {
+			label = "usb1:blue";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+		usb2 {
+			label = "usb2:blue";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		usb3 {
+			label = "usb3:blue";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		usb4 {
+			label = "usb4:blue";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+		otb {
+			label = "otb:blue";
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
+		pinctrl-names = "default";
+
+		otb {
+			label = "OTB Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@11 {
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-is2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-is2-u-boot.dtsi
new file mode 100644
index 000000000..1f3b18547
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-is2-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-is2.dts b/roms/u-boot/arch/arm/dts/kirkwood-is2.dts
new file mode 100644
index 000000000..1bc16a5cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-is2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Internet Space v2";
+	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-km_common.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-km_common.dtsi
new file mode 100644
index 000000000..9d0fc51c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-km_common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
+			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <25>;
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-km_kirkwood.dts b/roms/u-boot/arch/arm/dts/kirkwood-km_kirkwood.dts
new file mode 100644
index 000000000..b2c0209f5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-km_kirkwood.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80", "jedec,spi-nor", "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <33000000>;
+		mode = <3>;
+
+		partition@uboot {
+			reg = <0x000000 0x0c0000>;
+			label = "uboot";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-lschlv2.dts b/roms/u-boot/arch/arm/dts/kirkwood-lschlv2.dts
new file mode 100644
index 000000000..1d737d903
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-lschlv2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-CHLv2";
+	compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-lsxhl.dts b/roms/u-boot/arch/arm/dts/kirkwood-lsxhl.dts
new file mode 100644
index 000000000..a56e0d797
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-lsxhl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-XHL";
+	compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-lsxl.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-lsxl.dtsi
new file mode 100644
index 000000000..c99c0da09
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-lsxl.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd: pmx-power-hdd {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp11";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp19";
+				marvell,function = "gpo";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function_red {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		option {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+		reserved {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+		power {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+
+		func_blue {
+			label = "lsxl:blue:func";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		alarm {
+			label = "lsxl:red:alarm";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		info {
+			label = "lsxl:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "lsxl:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		func_red {
+			label = "lsxl:red:func";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
+		         &gpio0 18 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map = <0    3
+		                      1500 2
+		                      3250 1
+		                      5000 0>;
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 11 0>;
+		};
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 0>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-net2big-u-boot.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-net2big-u-boot.dtsi
new file mode 100644
index 000000000..1f3b18547
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-net2big-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-net2big.dts b/roms/u-boot/arch/arm/dts/kirkwood-net2big.dts
new file mode 100644
index 000000000..3e3ac289e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-net2big.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for LaCie 2Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 2Big Network v2";
+	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+};
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-netxbig.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-netxbig.dtsi
new file mode 100644
index 000000000..b5737026e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-netxbig.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for LaCie 2Big and 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+*/
+
+#include <dt-bindings/leds/leds-netxbig.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * esc and power represent a three position rocker
+		 * switch. Thus the conventional KEY_POWER does not fit
+		 */
+		exc {
+			label = "Back power switch (on|auto)";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+		power {
+			label = "Back power switch (auto|off)";
+			linux,code = <KEY_1>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+		option {
+			label = "Function button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators: regulators {
+		status = "okay";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd0power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	netxbig_gpio_ext: netxbig-gpio-ext {
+		compatible = "lacie,netxbig-gpio-ext";
+
+		addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+			      &gpio1 16 GPIO_ACTIVE_HIGH
+			      &gpio1 17 GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+			      &gpio1 13 GPIO_ACTIVE_HIGH
+			      &gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+	};
+
+	netxbig-leds {
+		compatible = "lacie,netxbig-leds";
+
+		gpio-ext = <&netxbig_gpio_ext>;
+
+		timers = <NETXBIG_LED_TIMER1 500 500
+			  NETXBIG_LED_TIMER2 500 1000>;
+
+		blue-power {
+			label = "netxbig:blue:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 1
+				    NETXBIG_LED_TIMER1 3
+				    NETXBIG_LED_TIMER2 7>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		red-power {
+			label = "netxbig:red:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		blue-sata0 {
+			label = "netxbig:blue:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata0 {
+			label = "netxbig:red:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata1 {
+			label = "netxbig:blue:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata1 {
+			label = "netxbig:red:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_button_function: pmx-button-function {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_off: pmx-button-power-off {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_on: pmx-button-power-on {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2-common.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-ns2-common.dtsi
new file mode 100644
index 000000000..51530ea86
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2-common.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_ns2_sata0: pmx-ns2-sata0 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_ns2_sata1: pmx-ns2-sata1 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "ns2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@X {
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-ns2-u-boot.dtsi
new file mode 100644
index 000000000..1f3b18547
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2.dts b/roms/u-boot/arch/arm/dts/kirkwood-ns2.dts
new file mode 100644
index 000000000..7b67083e1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space v2";
+	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2lite-u-boot.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-ns2lite-u-boot.dtsi
new file mode 100644
index 000000000..1f3b18547
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2lite-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2lite.dts b/roms/u-boot/arch/arm/dts/kirkwood-ns2lite.dts
new file mode 100644
index 000000000..b0cb5907e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2lite.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Lite v2";
+	compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2max-u-boot.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-ns2max-u-boot.dtsi
new file mode 100644
index 000000000..1f3b18547
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2max-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2max.dts b/roms/u-boot/arch/arm/dts/kirkwood-ns2max.dts
new file mode 100644
index 000000000..c0a087e77
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2max.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Max v2";
+	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+			 &gpio0  7 GPIO_ACTIVE_LOW
+			 &gpio1  1 GPIO_ACTIVE_LOW
+			 &gpio0 23 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map =
+			<   0  0
+			 1500 15
+			 1700 14
+			 1800 13
+			 2100 12
+			 3100 11
+			 3300 10
+			 4300  9
+			 5500  8>;
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2mini-u-boot.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-ns2mini-u-boot.dtsi
new file mode 100644
index 000000000..1f3b18547
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2mini-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-ns2mini.dts b/roms/u-boot/arch/arm/dts/kirkwood-ns2mini.dts
new file mode 100644
index 000000000..5b9fa14b6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-ns2mini.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	/* This machine is embedded in the first LaCie CloudBox product. */
+	model = "LaCie Network Space Mini v2";
+	compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+			 &gpio0  7 GPIO_ACTIVE_LOW
+			 &gpio1  1 GPIO_ACTIVE_LOW
+			 &gpio0 23 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map =
+			<   0  0
+			 3000 15
+			 3180 14
+			 4140 13
+			 4570 12
+			 6760 11
+			 7140 10
+			 7980  9
+			 9200  8>;
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-openrd-base.dts b/roms/u-boot/arch/arm/dts/kirkwood-openrd-base.dts
new file mode 100644
index 000000000..094191ece
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-openrd-base.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Base Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * base variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Base";
+	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-openrd-client.dts b/roms/u-boot/arch/arm/dts/kirkwood-openrd-client.dts
new file mode 100644
index 000000000..74dc23daf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-openrd-client.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Client Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * client variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Client";
+	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		audio-controller@a0000 {
+			status = "okay";
+		};
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+				#sound-dai-cells = <0>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio0 0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&cs42l51>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+	ethphy1: ethernet-phy@24 {
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-openrd-ultimate.dts b/roms/u-boot/arch/arm/dts/kirkwood-openrd-ultimate.dts
new file mode 100644
index 000000000..888e13320
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-openrd-ultimate.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Ultimate Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * ultimate variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Ultimate";
+	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-openrd.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-openrd.dtsi
new file mode 100644
index 000000000..47f03c69c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-openrd.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD (Base|Client|Ultimate) Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
+			pinctrl-names = "default";
+
+			pmx_select28: pmx-select-rs232-rs485 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_select34: pmx-select-uart-sd {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio0 29 9>;
+		};
+		gpio@10100 {
+			p28 {
+				gpio-hog;
+				gpios = <28 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelRS232or485 selects between RS-232 or RS-485
+				 * mode for the second UART.
+				 *
+				 * Low: RS-232
+				 * High: RS-485
+				 *
+				 * To use the second UART, you need to change also
+				 * the SelUARTorSD.
+				 */
+				output-low;
+				line-name = "SelRS232or485";
+			};
+		};
+		gpio@10140 {
+			p2 {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelUARTorSD selects between the second UART
+				 * (serial@12100) and SD (mvsdio@90000).
+				 *
+				 * Low: UART
+				 * High: SD
+				 *
+				 * When changing this line make sure the newly
+				 * selected device node is enabled and the
+				 * previously selected device node is disabled.
+				 */
+				output-high; /* Select SD by default */
+				line-name = "SelUARTorSD";
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "root";
+		reg = <0x0600000 0x1FA00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-pogo_e02.dts b/roms/u-boot/arch/arm/dts/kirkwood-pogo_e02.dts
new file mode 100644
index 000000000..f9e95e55f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-pogo_e02.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
+ *
+ * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
+ *
+ * based on information of dts files from
+ *  Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
+ *  OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Cloud Engines Pogoplug E02";
+	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "pogo_e02:green:health";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "pogo_e02:orange:fault";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+		      &pmx_led_green >;
+	pinctrl-names = "default";
+
+	pmx_usb_power_enable: pmx-usb-power-enable {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_orange: pmx-led-orange {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0x5b00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-sheevaplug-common.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-sheevaplug-common.dtsi
new file mode 100644
index 000000000..0a698d3b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-sheevaplug-common.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_wp: pmx-sdio-wp {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x0500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-sheevaplug.dts b/roms/u-boot/arch/arm/dts/kirkwood-sheevaplug.dts
new file mode 100644
index 000000000..c73cc904e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-sheevaplug.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies SheevaPlug";
+	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		misc {
+			label = "sheevaplug:red:misc";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood-synology.dtsi b/roms/u-boot/arch/arm/dts/kirkwood-synology.dtsi
new file mode 100644
index 000000000..c97ed29a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood-synology.dtsi
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_alarmled_12: pmx-alarmled-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_15: pmx-fanctrl-15 {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_16: pmx-fanctrl-16 {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_17: pmx-fanctrl-17 {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_18: pmx-fanalarm-18 {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+
+			pmx_hddled_20: pmx-hddled-20 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_21: pmx-hddled-21 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_22: pmx-hddled-22 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_23: pmx-hddled-23 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_24: pmx-hddled-24 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_25: pmx-hddled-25 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_26: pmx-hddled-26 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_27: pmx-hddled-27 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_28: pmx-hddled-28 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_32: pmx-fanctrl-32 {
+				marvell,pins = "mpp32";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_33: pmx-fanctrl-33 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpo";
+			};
+
+			pmx_fanctrl_34: pmx-fanctrl-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_35: pmx-fanalarm-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_36: pmx-hddled-36 {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_37: pmx-hddled-37 {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_38: pmx-hddled-38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_39: pmx-hddled-39 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_40: pmx-hddled-40 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_41: pmx-hddled-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_42: pmx-hddled-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_43: pmx-hddled-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_44: pmx-hddled-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_45: pmx-hddled-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_44: pmx-fanalarm-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_45: pmx-fanalarm-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x00000000 0x00080000>;
+					label = "RedBoot";
+				};
+
+				partition@80000 {
+					reg = <0x00080000 0x00200000>;
+					label = "zImage";
+				};
+
+				partition@280000 {
+					reg = <0x00280000 0x00140000>;
+					label = "rd.gz";
+				};
+
+				partition@3c0000 {
+					reg = <0x003c0000 0x00010000>;
+					label = "vendor";
+				};
+
+				partition@3d0000 {
+					reg = <0x003d0000 0x00020000>;
+					label = "RedBoot config";
+				};
+
+				partition@3f0000 {
+					reg = <0x003f0000 0x00010000>;
+					label = "FIS directory";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			rs5c372: rs5c372@32 {
+				status = "disabled";
+				compatible = "ricoh,rs5c372";
+				reg = <0x32>;
+			};
+
+			s35390a: s35390a@30 {
+				status = "disabled";
+				compatible = "sii,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		poweroff@12100 {
+			compatible = "synology,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-fan-150-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+			       &gpio1 12 GPIO_ACTIVE_HIGH
+			       &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-leds-alarm-12 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_alarmled_12>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:alarm";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-20 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+			     &pmx_hddled_26 &pmx_hddled_27>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-36 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+			     &pmx_hddled_45>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-green {
+			label = "synology:green:hdd5";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-amber {
+			label = "synology:amber:hdd5";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-38 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators-hdd-29 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-1 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-2 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-4 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-31 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-34 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+			     &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <9>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "disabled";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/kirkwood.dtsi b/roms/u-boot/arch/arm/dts/kirkwood.dtsi
new file mode 100644
index 000000000..81c7eda2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/kirkwood.dtsi
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/include/ "skeleton.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	compatible = "marvell,kirkwood";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,feroceon";
+			reg = <0>;
+			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+			clock-names = "cpu_clk", "ddrclk", "powersave";
+		};
+	};
+
+	aliases {
+	       gpio0 = &gpio0;
+	       gpio1 = &gpio1;
+	       i2c0 = &i2c0;
+	};
+
+	mbus@f1000000 {
+		compatible = "marvell,kirkwood-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/* If a board file needs to change this ranges it must replace it completely */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
+			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
+			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
+			  >;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
+		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+		nand: nand@12f {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "marvell,orion-nand";
+			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		crypto_sram: sa-sram@301 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
+			clocks = <&gate_clk 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	ocp@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf1000000 0x0100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pinctrl: pin-controller@10000 {
+			/* set compatible property in SoC file */
+			reg = <0x10000 0x20>;
+
+			pmx_ge1: pmx-ge1 {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+					       "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp30", "mpp31", "mpp32", "mpp33";
+				marvell,function = "ge1";
+			};
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18", "mpp19";
+				marvell,function = "nand";
+			};
+
+			/*
+			 * Default SPI0 pinctrl setting with CSn on mpp0,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+
+			/*
+			 * Default UART pinctrl setting without RTS/CTS,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+
+		core_clk: core-clocks@10030 {
+			compatible = "marvell,kirkwood-core-clock";
+			reg = <0x10030 0x4>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <23>;
+			reg = <0x10600 0x28>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <35>, <36>, <37>, <38>;
+			clocks = <&gate_clk 7>;
+		};
+
+		gpio1: gpio@10140 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10140 0x40>;
+			ngpios = <18>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <39>, <40>, <41>;
+			clocks = <&gate_clk 7>;
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <29>;
+			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi0>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <33>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <34>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		mbusc: mbus-controller@20000 {
+			compatible = "marvell,mbus-controller";
+			reg = <0x20000 0x80>, <0x1500 0x20>;
+		};
+
+		sysc: system-controller@20000 {
+			compatible = "marvell,orion-system-controller";
+			reg = <0x20000 0x120>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <1>;
+			marvell,#interrupts = <6>;
+		};
+
+		gate_clk: clock-gating-control@2011c {
+			compatible = "marvell,kirkwood-gating-clock";
+			reg = <0x2011c 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
+
+		intc: main-interrupt-ctrl@20200 {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
+		wdt: watchdog-timer@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>, <0x20108 0x4>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <3>;
+			clocks = <&gate_clk 7>;
+			status = "okay";
+		};
+
+		cesa: crypto@30000 {
+			compatible = "marvell,kirkwood-crypto";
+			reg = <0x30000 0x10000>;
+			reg-names = "regs";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			marvell,crypto-srams = <&crypto_sram>;
+			marvell,crypto-sram-size = <0x800>;
+			status = "okay";
+		};
+
+		usb0: ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <19>;
+			clocks = <&gate_clk 3>;
+			status = "okay";
+		};
+
+		dma0: xor@60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60A00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 8>;
+
+			xor00 {
+			      interrupts = <5>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <6>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		dma1: xor@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0x60B00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 16>;
+
+			xor00 {
+			      interrupts = <7>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <8>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		eth0: ethernet-controller@72000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			clocks = <&gate_clk 0>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			eth0port: ethernet0-port@0 {
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <11>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <46>;
+			clocks = <&gate_clk 0>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth1: ethernet-controller@76000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x76000 0x4000>;
+			clocks = <&gate_clk 19>;
+			marvell,tx-checksum-limit = <1600>;
+			pinctrl-0 = <&pmx_ge1>;
+			pinctrl-names = "default";
+			status = "disabled";
+
+			eth1port: ethernet1-port@0 {
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <15>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		sata_phy0: sata-phy@82000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x82000 0x0334>;
+			clocks = <&gate_clk 14>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
+
+		sata_phy1: sata-phy@84000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x84000 0x0334>;
+			clocks = <&gate_clk 15>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
+
+		audio0: audio-controller@a0000 {
+			compatible = "marvell,kirkwood-audio";
+			#sound-dai-cells = <0>;
+			reg = <0xa0000 0x2210>;
+			interrupts = <24>;
+			clocks = <&gate_clk 9>;
+			clock-names = "internal";
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
new file mode 100644
index 000000000..7832c9ab5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		/delete-property/ serial1;
+		/delete-property/ serial2;
+	};
+
+	ethernet@08000000 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		reg = <0x08000000 0xff>;
+		bank-width = <2>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
+
+&gpio1 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio2 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio3 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio4 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio5 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio6 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	/delete-property/ u-boot,dm-spl;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/delete-property/ u-boot,dm-spl;
+};
+
+/delete-node/ &bandgap;
+/delete-node/ &uart2;
+/delete-node/ &uart3;
+/delete-node/ &mmc2;
+/delete-node/ &mmc3;
+/delete-node/ &thermal_zones;
+
diff --git a/roms/u-boot/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts b/roms/u-boot/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts
new file mode 100644
index 000000000..f7a841a28
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "logicpd-som-lv-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
+	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3";
+};
diff --git a/roms/u-boot/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi
new file mode 100644
index 000000000..7832c9ab5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		/delete-property/ serial1;
+		/delete-property/ serial2;
+	};
+
+	ethernet@08000000 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		reg = <0x08000000 0xff>;
+		bank-width = <2>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
+
+&gpio1 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio2 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio3 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio4 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio5 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio6 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	/delete-property/ u-boot,dm-spl;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/delete-property/ u-boot,dm-spl;
+};
+
+/delete-node/ &bandgap;
+/delete-node/ &uart2;
+/delete-node/ &uart3;
+/delete-node/ &mmc2;
+/delete-node/ &mmc3;
+/delete-node/ &thermal_zones;
+
diff --git a/roms/u-boot/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts b/roms/u-boot/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts
new file mode 100644
index 000000000..a604d9222
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "logicpd-som-lv-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
+	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
+};
diff --git a/roms/u-boot/arch/arm/dts/logicpd-som-lv-baseboard.dtsi b/roms/u-boot/arch/arm/dts/logicpd-som-lv-baseboard.dtsi
new file mode 100644
index 000000000..100396f6c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-som-lv-baseboard.dtsi
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+
+		sysboot2 {
+			label = "gpio3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* gpio_111 / uP_GPIO_3 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3logic";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins &led_pins_wkup>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;	/* gpio133 */
+			linux,default-trigger = "cpu0";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;	/* gpio11 */
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000	/* CS1: 16MB for LAN9221 */
+		  2 0 0x10000000 0x2000000>;    /* CS2: 32MB for NOR */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;		/* gpio_152 */
+		reg = <1 0 0xff>;
+	};
+};
+
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&video_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins1>;
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	video_reg: video_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcd0: display@0 {
+		compatible = "panel-dpi";
+		label = "28";
+		status = "okay";
+		/* default-on; */
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_pin>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <3>;
+			vfront-porch = <2>;
+			vsync-len = <11>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&twl_pwm 0 5000000>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;			/* gpio_110 */
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_xclkb.gpio_111 / uP_GPIO_3*/
+		>;
+	};
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
+		>;
+	};
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
+		>;
+	};
+
+	lcd_enable_pin: pinmux_lcd_enable_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	led_pins_wkup: pinmux_led_pins_wkup {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 / uP_GPIO_1 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
+		>;
+	};
+};
+
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/roms/u-boot/arch/arm/dts/logicpd-som-lv.dtsi b/roms/u-boot/arch/arm/dts/logicpd-som-lv.dtsi
new file mode 100644
index 000000000..b56524cc7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-som-lv.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 3 0>;   /* gpio_3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vaux3>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
+		#phy-cells = <0>;
+	};
+
+	/* fixed 26MHz oscillator */
+	hfclk_26m: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+		clocks = <&hfclk_26m>;
+		clock-names = "fck";
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+				ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		vio-supply = <&vaux1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mmc3 {
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
+	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
+	pinctrl-names = "default";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1273";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 2 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
+
+	mmc3_pins: pinmux_mm3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
+		>;
+	};
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+		>;
+	};
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
+		>;
+	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)        /* gpmc_ncs6.gpio_57 */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_reset_pin>;
+	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
+		>;
+	};
+	wl127x_gpio: pinmux_wl127x_gpio_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
diff --git a/roms/u-boot/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
new file mode 100644
index 000000000..89b20be38
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		/delete-property/ serial1;
+		/delete-property/ serial2;
+	};
+
+	ethernet@08000000 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		reg = <0x08000000 0xff>;
+		bank-width = <2>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
+
+&gpio1 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio2 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio3 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio4 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio5 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio6 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	/delete-property/ u-boot,dm-spl;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/delete-property/ u-boot,dm-spl;
+};
+
+/delete-node/ &bandgap;
+/delete-node/ &uart2;
+/delete-node/ &uart3;
+/delete-node/ &mmc2;
+/delete-node/ &mmc3;
+/delete-node/ &thermal_zones;
diff --git a/roms/u-boot/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts b/roms/u-boot/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts
new file mode 100644
index 000000000..7675bc3fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "logicpd-torpedo-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3";
+};
diff --git a/roms/u-boot/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
new file mode 100644
index 000000000..e56666e4b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ serial1;
+		/delete-property/ serial2;
+	};
+
+	ethernet@08000000 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x08000000 0xff>;
+		bank-width = <2>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	/delete-property/ u-boot,dm-spl;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&gpio1 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio2 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio3 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio4 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio5 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+&gpio6 {
+	/delete-property/ u-boot,dm-spl;
+};
+
+/delete-node/ &bandgap;
+/delete-node/ &uart2;
+/delete-node/ &uart3;
+/delete-node/ &mmc2;
+/delete-node/ &mmc3;
+/delete-node/ &thermal_zones;
diff --git a/roms/u-boot/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts b/roms/u-boot/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
new file mode 100644
index 000000000..18c27e850
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+#include "logicpd-torpedo-baseboard.dtsi"
+
+/ {
+	model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 29 0>;   /* gpio157 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+/*
+ * Only found on the wireless SOM. For the SOM without wireless, the pins for
+ * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
+ * gpio157 is not connected. So this should be OK to keep common for now,
+ * probably device tree overlays is the way to go with the various SOM and
+ * jumpering combinations for the long run.
+ */
+&mmc3 {
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
+	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1283";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&omap3_pmx_core {
+	mmc3_pins: pinmux_mm3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_core2_pins: pinmux_mmc3_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_ctl.sdmmc3_cmd */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/logicpd-torpedo-baseboard.dtsi b/roms/u-boot/arch/arm/dts/logicpd-torpedo-baseboard.dtsi
new file mode 100644
index 000000000..642e809e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-torpedo-baseboard.dtsi
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
+
+		sysboot2 {
+			label = "sysboot2";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;	/* gpio2 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+
+		sysboot5 {
+			label = "sysboot5";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;	/* gpio7 */
+			linux,code = <BTN_1>;
+			wakeup-source;
+		};
+
+		gpio1 {
+			label = "gpio1";
+			gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;	/* gpio181 */
+			linux,code = <BTN_2>;
+			wakeup-source;
+		};
+
+		gpio2 {
+			label = "gpio2";
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;	/* gpio178 */
+			linux,code = <BTN_3>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3logic";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;	/* gpio180 */
+			linux,default-trigger = "cpu0";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;	/* gpio179 */
+			linux,default-trigger = "none";
+		};
+	};
+
+	pwm10: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_pins>;
+		ti,timers = <&timer10>;
+		#pwm-cells = <3>;
+	};
+
+};
+
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;		/* gpio129 */
+		reg = <1 0 0xff>;
+	};
+};
+
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&video_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins1>;
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	video_reg: video_reg {
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pwr_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+	};
+
+	lcd0: display {
+		compatible = "panel-dpi";
+		label = "15";
+		status = "okay";
+		/* default-on; */
+		pinctrl-names = "default";
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <3>;
+			vfront-porch = <4>;
+			vsync-len = <11>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 5000000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;		/* gpio127 */
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_clk.gpio_178 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_cs0.gpio_181 */
+		>;
+	};
+
+	pwm_pins: pinmux_pwm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
+		>;
+	};
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)	/* gpio_179 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)	/* gpio_180 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
+		>;
+	};
+
+	isp_pins: pinmux_isp_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
+
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)   /* cam_d6.cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)   /* cam_d7.cam_d7 */
+		>;
+	};
+
+	panel_pwr_pins: pinmux_panel_pwr_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot5.gpio_7 */
+		>;
+	};
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)		/* reserved.gpio_129 */
+		>;
+	};
+
+	mmc1_cd: pinmux_mmc1_cd {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_127 */
+		>;
+	};
+};
+
+&i2c2 {
+	mt9p031@48 {
+		compatible = "aptina,mt9p031";
+		reg = <0x48>;
+		clocks = <&isp 0>;
+		vaa-supply = <&vaux4>;
+		vdd-supply = <&vaux4>;
+		vdd_io-supply = <&vaux4>;
+		port {
+			mt9p031_out: endpoint {
+				input-clock-frequency = <24000000>;
+				pixel-clock-frequency = <72000000>;
+				remote-endpoint = <&ccdc_ep>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		vio-supply = <&vaux1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mcspi1 {
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+
+		pagesize = <64>;
+		size = <32768>;
+		address-width = <16>;
+	};
+};
+
+&isp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&isp_pins>;
+	ports {
+		port@0 {
+			reg = <0>;
+			ccdc_ep: endpoint {
+				remote-endpoint = <&mt9p031_out>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/roms/u-boot/arch/arm/dts/logicpd-torpedo-som.dtsi b/roms/u-boot/arch/arm/dts/logicpd-torpedo-som.dtsi
new file mode 100644
index 000000000..3fdd0a72f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/logicpd-torpedo-som.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user0 {
+			label = "user0";
+			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
+			linux,default-trigger = "none";
+		};
+	};
+
+	/* fixed 26MHz oscillator */
+	hfclk_26m: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+		clocks = <&hfclk_26m>;
+		clock-names = "fck";
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	at24@50 {
+		compatible = "atmel,24c64";
+		readonly;
+		reg = <0x50>;
+	};
+};
+
+&omap3_pmx_core {
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+		>;
+	};
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
+		>;
+	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-iot-duart.dts b/roms/u-boot/arch/arm/dts/ls1021a-iot-duart.dts
new file mode 100644
index 000000000..d144c05af
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-iot-duart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a IOT board device tree source
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "ls1021a-iot.dtsi"
+
+/ {
+	chosen {
+	stdout-path = &uart0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-iot.dtsi b/roms/u-boot/arch/arm/dts/ls1021a-iot.dtsi
new file mode 100644
index 000000000..44dd9b61d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-iot.dtsi
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a IOT board device tree source
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A IOT Board";
+
+	aliases {
+		enet2-rgmii-phy = &rgmii_phy1;
+		enet0-sgmii-phy = &sgmii_phy2;
+		enet1-sgmii-phy = &sgmii_phy0;
+		spi0 = &qspi;
+		spi1 = &dspi1;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: n25q128a13@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x60000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-pg-wcom-expu1.dts b/roms/u-boot/arch/arm/dts/ls1021a-pg-wcom-expu1.dts
new file mode 100644
index 000000000..33456b7c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-pg-wcom-expu1.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hitachi ABB Power Grids EXPU1 board device tree source
+ *
+ * Copyright 2020 Hitachi ABB Power Grids
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "EXPU1 Service Unit for XMC and FOX";
+
+	aliases {
+		enet2-rgmii-debug-phy = &debug_phy;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&enet0 {
+	status = "okay";
+	tbi-handle = <&tbi0>;
+	phy-connection-type = "sgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&enet1 {
+	status = "okay";
+	tbi-handle = <&tbi1>;
+	phy-connection-type = "sgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&enet2 {
+	phy-handle = <&debug_phy>;
+	phy-connection-type = "rgmii-id";
+	max-speed = <100>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+	zl30343@0 {
+		compatible = "gen,spidev", "zarlink,zl30343";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x60000000 0x04000000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			label = "rcw";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+		partition@20000 {
+			label = "qe";
+			reg = <0x20000 0x20000>;
+		};
+		/* ZL30343 init data to be added here */
+		partition@40000 {
+			label = "envred";
+			reg = <0x40000 0x20000>;
+		};
+		partition@60000 {
+			label = "env";
+			reg = <0x60000 0x20000>;
+		};
+		partition@100000 {
+			label = "u-boot";
+			reg = <0x100000 0x100000>;
+		};
+		partition@200000 {
+			label = "ubi0";
+			reg = <0x200000 0x3E00000>;
+		};
+	};
+};
+
+&mdio0 {
+	debug_phy: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	tbi0: tbi-phy@0xb {
+		reg = <0xb>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	tbi1: tbi-phy@0xd {
+		reg = <0xd>;
+		device_type = "tbi-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-pg-wcom-seli8.dts b/roms/u-boot/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
new file mode 100644
index 000000000..e335188bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ * Copyright 2020 Hitachi Power Grids. All rights reserved.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "Hitachi-Powergrids SELI8 Service Unit for XMC and FOX";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&enet0 {
+	status = "okay";
+	tbi-handle = <&tbi0>;
+	phy-connection-type = "sgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&enet1 {
+	status = "okay";
+	tbi-handle = <&tbi1>;
+	phy-connection-type = "sgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&enet2 {
+	phy-handle = <&debug_phy>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x60000000 0x04000000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			label = "rcw";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+		partition@20000 {
+			label = "qe";
+			reg = <0x20000 0x20000>;
+		};
+		partition@40000 {
+			label = "envred";
+			reg = <0x40000 0x20000>;
+		};
+		partition@60000 {
+			label = "env";
+			reg = <0x60000 0x20000>;
+		};
+		partition@100000 {
+			label = "u-boot";
+			reg = <0x100000 0x100000>;
+		};
+		partition@200000 {
+			label = "ubi0";
+			reg = <0x200000 0x3E00000>;
+		};
+	};
+};
+
+&mdio0 {
+	debug_phy: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	tbi0: tbi-phy@0xb {
+		reg = <0xb>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	tbi1: tbi-phy@0xd {
+		reg = <0xd>;
+		device_type = "tbi-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-qds-duart.dts b/roms/u-boot/arch/arm/dts/ls1021a-qds-duart.dts
new file mode 100644
index 000000000..9fabf27f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-qds-duart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a QDS board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "ls1021a-qds.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-qds-lpuart.dts b/roms/u-boot/arch/arm/dts/ls1021a-qds-lpuart.dts
new file mode 100644
index 000000000..405e915d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-qds-lpuart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a QDS board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "ls1021a-qds.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &lpuart0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-qds.dtsi b/roms/u-boot/arch/arm/dts/ls1021a-qds.dtsi
new file mode 100644
index 000000000..b12102abf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-qds.dtsi
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a QDS board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A QDS Board";
+
+	aliases {
+		enet0-rgmii-phy = &rgmii_phy1;
+		enet1-rgmii-phy = &rgmii_phy2;
+		enet2-rgmii-phy = &rgmii_phy3;
+		enet0-sgmii-phy = &sgmii_phy1c;
+		enet1-sgmii-phy = &sgmii_phy1d;
+		spi0 = &qspi;
+		spi1 = &dspi0;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at45db021d@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,dataflash";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@77 {
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ds3232: rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x60000000 0x08000000
+		  0x2 0x0 0x7e800000 0x00010000
+		  0x3 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0x3 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 3 0 0x100>;
+
+		mdio-mux-emi1 {
+			compatible = "mdio-mux-mmioreg";
+			mdio-parent-bus = <&mdio0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x54 1>; /* BRDCFG4 */
+			mux-mask = <0xe0>; /* EMI1[2:0] */
+
+			/* Onboard PHYs */
+			ls1021amdio0: mdio@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			ls1021amdio1: mdio@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+			};
+
+			ls1021amdio2: mdio@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
+			ls1021amdio3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1c: ethernet-phy@1c {
+					reg = <0x1c>;
+				};
+			};
+
+			ls1021amdio4: mdio@80 {
+				reg = <0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1d: ethernet-phy@1d {
+					reg = <0x1d>;
+				};
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	tbi0: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-tsn.dts b/roms/u-boot/arch/arm/dts/ls1021a-tsn.dts
new file mode 100644
index 000000000..f63307409
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-tsn.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright 2016-2018 NXP Semiconductors
+ * Copyright 2019 Vladimir Oltean <olteanv@gmail.com>
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "NXP LS1021A-TSN Board";
+
+	aliases {
+		enet0-sgmii-phy = &sgmii_phy2;
+		enet1-sgmii-phy = &sgmii_phy1;
+		spi0 = &qspi;
+		spi1 = &dspi1;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy2>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&mdio0 {
+	/* AR8031 */
+	sgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+
+	/* AR8031 */
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	/* SGMII PCS for enet0 */
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	/* SGMII PCS for enet1 */
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-flash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-twr-duart.dts b/roms/u-boot/arch/arm/dts/ls1021a-twr-duart.dts
new file mode 100644
index 000000000..e58fbfbc2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-twr-duart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a TWR board device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "ls1021a-twr.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-twr-lpuart.dts b/roms/u-boot/arch/arm/dts/ls1021a-twr-lpuart.dts
new file mode 100644
index 000000000..eb97611e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-twr-lpuart.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a TWR board device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "ls1021a-twr.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &lpuart0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a-twr.dtsi b/roms/u-boot/arch/arm/dts/ls1021a-twr.dtsi
new file mode 100644
index 000000000..bf96af7e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a-twr.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a TWR board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A TWR Board";
+
+	aliases {
+		enet2-rgmii-phy = &rgmii_phy1;
+		enet0-sgmii-phy = &sgmii_phy2;
+		enet1-sgmii-phy = &sgmii_phy0;
+		spi0 = &qspi;
+		spi1 = &dspi1;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	n25q128a130: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x60000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	/* SGMII PCS for enet0 */
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	/* SGMII PCS for enet1 */
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/ls1021a.dtsi b/roms/u-boot/arch/arm/dts/ls1021a.dtsi
new file mode 100644
index 000000000..7ba2dd226
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ls1021a.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale ls1021a SOC common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,ls1021a";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		serial4 = &lpuart4;
+		serial5 = &lpuart5;
+		sysclk = &sysclk;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+			clocks = <&cluster1_clk>;
+		};
+
+		cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+			clocks = <&cluster1_clk>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		gic: interrupt-controller@1400000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1401000 0x1000>,
+			      <0x1402000 0x1000>,
+			      <0x1404000 0x2000>,
+			      <0x1406000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x1530000 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1021a-dcfg", "syscon";
+			reg = <0x1ee0000 0x10000>;
+			big-endian;
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,esdhc";
+			reg = <0x1560000 0x10000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x2300000 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x2310000 0x10000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x2320000 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x2330000 0x10000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1021a-scfg", "syscon";
+			reg = <0x1570000 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1ee1000 0x10000>;
+
+			sysclk: sysclk {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-output-names = "sysclk";
+			};
+
+			cga_pll1: pll@800 {
+				compatible = "fsl,qoriq-core-pll-2.0";
+				#clock-cells = <1>;
+				reg = <0x800 0x10>;
+				clocks = <&sysclk>;
+				clock-output-names = "cga-pll1", "cga-pll1-div2",
+						     "cga-pll1-div4";
+			};
+
+			platform_clk: pll@c00 {
+				compatible = "fsl,qoriq-core-pll-2.0";
+				#clock-cells = <1>;
+				reg = <0xc00 0x10>;
+				clocks = <&sysclk>;
+				clock-output-names = "platform-clk", "platform-clk-div2";
+			};
+
+			cluster1_clk: clk0c0@0 {
+				compatible = "fsl,qoriq-core-mux-2.0";
+				#clock-cells = <0>;
+				reg = <0x0 0x10>;
+				clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
+				clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
+				clock-output-names = "cluster1-clk";
+			};
+		};
+
+		dspi0: dspi@2100000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2100000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&platform_clk 1>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: dspi@2110000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2110000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&platform_clk 1>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		qspi: quadspi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1550000 0x10000>,
+				<0x40000000 0x1000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2180000 0x10000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&platform_clk 1>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2190000 0x10000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&platform_clk 1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x21a0000 0x10000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&platform_clk 1>;
+			status = "disabled";
+		};
+
+		uart0: serial@21c0500 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x21c0500 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart1: serial@21c0600 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x21c0600 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart2: serial@21d0500 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x21d0500 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart3: serial@21d0600 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x21d0600 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x2950000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x2960000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x2970000 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x2980000 0x1000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x2990000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x29a0000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,imx21-wdt";
+			reg = <0x2ad0000 0x10000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "wdog-en";
+			big-endian;
+		};
+
+		sai1: sai@2b50000 {
+			compatible = "fsl,vf610-sai";
+			reg = <0x2b50000 0x10000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "sai";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 47>,
+			       <&edma0 1 46>;
+			big-endian;
+			status = "disabled";
+		};
+
+		sai2: sai@2b60000 {
+			compatible = "fsl,vf610-sai";
+			reg = <0x2b60000 0x10000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "sai";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 45>,
+			       <&edma0 1 44>;
+			big-endian;
+			status = "disabled";
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x2c00000 0x10000>,
+			      <0x2c10000 0x10000>,
+			      <0x2c20000 0x10000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&platform_clk 1>,
+				 <&platform_clk 1>;
+		};
+
+		enet0: ethernet@2d10000 {
+			compatible = "fsl,etsec2";
+			reg = <0x2d10000 0x1000>;
+			status = "disabled";
+		};
+
+		enet1: ethernet@2d50000 {
+			compatible = "fsl,etsec2";
+			reg = <0x2d50000 0x1000>;
+			status = "disabled";
+		};
+
+		enet2: ethernet@2d90000 {
+			compatible = "fsl,etsec2";
+			reg = <0x2d90000 0x1000>;
+			status = "disabled";
+		};
+
+		mdio0: mdio@2d24000 {
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x2d24000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio1: mdio@2d64000 {
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x2d64000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x8600000 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		usb3@3100000 {
+			compatible = "fsl,layerscape-dwc3";
+			reg = <0x3100000 0x10000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x03400000 0x20000   /* dbi registers */
+			       0x01570000 0x10000   /* pf controls registers */
+			       0x24000000 0x20000>; /* configuration space */
+			reg-names = "dbi", "ctrl", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x24020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x28000000 0x28000000 0x0 0x08000000>; /* non-prefetchable memory */
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls-pcie", "snps,dw-pcie";
+			reg = <0x03500000 0x10000    /* dbi registers */
+			       0x01570000 0x10000    /* pf controls registers */
+			       0x34000000 0x20000>;  /* configuration space */
+			reg-names = "dbi", "ctrl", "config";
+			big-endian;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x34020000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x38000000 0x38000000 0x0 0x08000000>; /* non-prefetchable memory */
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1021a-ahci";
+			reg = <0x3200000 0x10000 0x20220520 0x4>;
+			reg-names = "sata-base", "ecc-addr";
+			interrupts = <0 101 4>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-axg-s400-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-axg-s400-u-boot.dtsi
new file mode 100644
index 000000000..2c4b06f14
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-axg-s400-u-boot.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#include "meson-axg-u-boot.dtsi"
+
+/* wifi module */
+&sd_emmc_b {
+	status = "disabled";
+};
+
+/* emmc storage */
+&sd_emmc_c {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+	vbus-supply = <&usb_pwr>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-axg-s400.dts b/roms/u-boot/arch/arm/dts/meson-axg-s400.dts
new file mode 100644
index 000000000..cb1360ae1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-axg-s400.dts
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
+	model = "Amlogic Meson AXG S400 Development Board";
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-next {
+			label = "Next";
+			linux,code = <KEY_NEXT>;
+			press-threshold-microvolt = <1116000>; /* 62% */
+		};
+
+		button-prev {
+			label = "Previous";
+			linux,code = <KEY_PREVIOUS>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-wifi {
+			label = "Wifi";
+			linux,code = <KEY_WLAN>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-voice {
+			label = "Voice";
+			linux,code = <KEY_VOICECOMMAND>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	linein: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7241";
+		VDDA-supply = <&vcc_3v3>;
+		VDDP-supply = <&vcc_3v3>;
+		VDDD-supply = <&vcc_3v3>;
+		status = "okay";
+		sound-name-prefix = "Linein";
+	};
+
+	lineout: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7154";
+		VDD-supply = <&vcc_3v3>;
+		PVDD-supply = <&vcc_5v>;
+		status = "okay";
+		sound-name-prefix = "Lineout";
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	dmics: audio-codec-3 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <7>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	spdif_dir: audio-codec-4 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+		status = "okay";
+		sound-name-prefix = "DIR";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	speaker-leds {
+		compatible = "gpio-leds";
+
+		aled1 {
+			label = "speaker:aled1";
+			gpios = <&gpio_speaker 7 0>;
+		};
+
+		aled2 {
+			label = "speaker:aled2";
+			gpios = <&gpio_speaker 6 0>;
+		};
+
+		aled3 {
+			label = "speaker:aled3";
+			gpios = <&gpio_speaker 5 0>;
+		};
+
+		aled4 {
+			label = "speaker:aled4";
+			gpios = <&gpio_speaker 4 0>;
+		};
+
+		aled5 {
+			label = "speaker:aled5";
+			gpios = <&gpio_speaker 3 0>;
+		};
+
+		aled6 {
+			label = "speaker:aled6";
+			gpios = <&gpio_speaker 2 0>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "AXG-S400";
+		audio-aux-devs = <&tdmin_a>, <&tdmin_b>,  <&tdmin_c>,
+				 <&tdmin_lb>, <&tdmout_c>;
+		audio-widgets = "Line", "Lineout",
+				"Line", "Linein",
+				"Speaker", "Speaker1 Left",
+				"Speaker", "Speaker1 Right";
+		audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TDMIN_LB IN 5", "TDM_C Capture",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 3", "SPDIFIN Capture",
+				"TODDR_B IN 3", "SPDIFIN Capture",
+				"TODDR_C IN 3", "SPDIFIN Capture",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"Lineout", "Lineout AOUTL",
+				"Lineout", "Lineout AOUTR",
+				"Speaker1 Left", "SPK1 OUT_A",
+				"Speaker1 Left", "SPK1 OUT_B",
+				"Speaker1 Right", "SPK1 OUT_C",
+				"Speaker1 Right", "SPK1 OUT_D",
+				"Linein AINL", "Linein",
+				"Linein AINR", "Linein";
+		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <589824000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		dai-link-6 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-rx-mask-1 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&lineout>;
+			};
+
+			codec-1 {
+				sound-dai = <&speaker_amp1>;
+			};
+
+			codec-2 {
+				sound-dai = <&linein>;
+			};
+
+		};
+
+		dai-link-7 {
+			sound-dai = <&spdifout>;
+
+			codec {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-8 {
+			sound-dai = <&spdifin>;
+
+			codec {
+				sound-dai = <&spdif_dir>;
+			};
+		};
+
+		dai-link-9 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_y_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_z_pins>;
+	pinctrl-names = "default";
+
+	speaker_amp1: audio-codec@1b {
+		compatible = "ti,tas5707";
+		reg = <0x1b>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&vcc_3v3>;
+		DVDD-supply = <&vcc_3v3>;
+		PVDD_A-supply = <&main_12v>;
+		PVDD_B-supply = <&main_12v>;
+		PVDD_C-supply = <&main_12v>;
+		PVDD_D-supply = <&main_12v>;
+		sound-name-prefix = "SPK1";
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+	pinctrl-names = "default";
+
+	gpio_speaker: gpio-controller@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
+		    <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_x20_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* wifi module */
+&sd_emmc_b {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* emmc storage */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&spdifin {
+	pinctrl-0 = <&spdif_in_a19_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_a20_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
+		    <&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
+		    <&tdmb_din3_pins>, <&mclk_b_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_c {
+	pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
+		    <&tdmc_din1_pins>, <&tdmc_dout2_pins>,
+		    <&mclk_c_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-axg-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-axg-u-boot.dtsi
new file mode 100644
index 000000000..cb1c71e78
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-axg-u-boot.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+	soc {
+		usb: usb@ffe09080 {
+			compatible = "amlogic,meson-gxl-usb-ctrl";
+			reg = <0x0 0xffe09080 0x0 0x20>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "usb_ctrl", "ddr";
+			resets = <&reset RESET_USB_OTG>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy1>;
+			phy-names = "usb2-phy1";
+
+			dwc2: usb@ff400000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xff400000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@ff500000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff500000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+	};
+};
+
+&apb {
+	usb2_phy1: phy@9020 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x9020 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-axg.dtsi b/roms/u-boot/arch/arm/dts/meson-axg.dtsi
new file mode 100644
index 000000000..b9efc8469
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-axg.dtsi
@@ -0,0 +1,1776 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/clock/axg-clkc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-axg-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+
+/ {
+	compatible = "amlogic,meson-axg";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc CLKID_EFUSE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+	};
+
+	scpi {
+		compatible = "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: clock-controller {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "amlogic,meson-gxbb-scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ethmac: ethernet@ff3f0000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
+			      <0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+		};
+
+		pdm: audio-controller@ff632000 {
+			compatible = "amlogic,axg-pdm";
+			reg = <0x0 0xff632000 0x0 0x34>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "PDM";
+			clocks = <&clkc_audio AUD_CLKID_PDM>,
+				 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+				 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+			clock-names = "pclk", "dclk", "sysclk";
+			status = "disabled";
+		};
+
+		periphs: bus@ff634000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff634000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+
+			hwrng: rng@18 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x18 0x0 0x4>;
+				clocks = <&clkc CLKID_RNG0>;
+				clock-names = "core";
+			};
+
+			pinctrl_periphs: pinctrl@480 {
+				compatible = "amlogic,meson-axg-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@480 {
+					reg = <0x0 0x00480 0x0 0x40>,
+					      <0x0 0x004e8 0x0 0x14>,
+					      <0x0 0x00520 0x0 0x14>,
+					      <0x0 0x00430 0x0 0x3c>;
+					reg-names = "mux", "pull", "pull-enable", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_periphs 0 0 86>;
+				};
+
+				i2c0_pins: i2c0 {
+					mux {
+						groups = "i2c0_sck",
+							 "i2c0_sda";
+						function = "i2c0";
+						bias-disable;
+					};
+				};
+
+				i2c1_x_pins: i2c1_x {
+					mux {
+						groups = "i2c1_sck_x",
+							 "i2c1_sda_x";
+						function = "i2c1";
+						bias-disable;
+					};
+				};
+
+				i2c1_z_pins: i2c1_z {
+					mux {
+						groups = "i2c1_sck_z",
+							 "i2c1_sda_z";
+						function = "i2c1";
+						bias-disable;
+					};
+				};
+
+				i2c2_a_pins: i2c2_a {
+					mux {
+						groups = "i2c2_sck_a",
+							 "i2c2_sda_a";
+						function = "i2c2";
+						bias-disable;
+					};
+				};
+
+				i2c2_x_pins: i2c2_x {
+					mux {
+						groups = "i2c2_sck_x",
+							 "i2c2_sda_x";
+						function = "i2c2";
+						bias-disable;
+					};
+				};
+
+				i2c3_a6_pins: i2c3_a6 {
+					mux {
+						groups = "i2c3_sda_a6",
+							 "i2c3_sck_a7";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				i2c3_a12_pins: i2c3_a12 {
+					mux {
+						groups = "i2c3_sda_a12",
+							 "i2c3_sck_a13";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				i2c3_a19_pins: i2c3_a19 {
+					mux {
+						groups = "i2c3_sda_a19",
+							 "i2c3_sck_a20";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				emmc_pins: emmc {
+					mux-0 {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+					};
+
+					mux-1 {
+						groups = "emmc_clk";
+						function = "emmc";
+						bias-disable;
+					};
+				};
+
+				emmc_ds_pins: emmc_ds {
+					mux {
+						groups = "emmc_ds";
+						function = "emmc";
+						bias-pull-down;
+					};
+				};
+
+				emmc_clk_gate_pins: emmc_clk_gate {
+					mux {
+						groups = "BOOT_8";
+						function = "gpio_periphs";
+						bias-pull-down;
+					};
+				};
+
+				eth_rgmii_x_pins: eth-x-rgmii {
+					mux {
+						groups = "eth_mdio_x",
+							 "eth_mdc_x",
+							 "eth_rgmii_rx_clk_x",
+							 "eth_rx_dv_x",
+							 "eth_rxd0_x",
+							 "eth_rxd1_x",
+							 "eth_rxd2_rgmii",
+							 "eth_rxd3_rgmii",
+							 "eth_rgmii_tx_clk",
+							 "eth_txen_x",
+							 "eth_txd0_x",
+							 "eth_txd1_x",
+							 "eth_txd2_rgmii",
+							 "eth_txd3_rgmii";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rgmii_y_pins: eth-y-rgmii {
+					mux {
+						groups = "eth_mdio_y",
+							 "eth_mdc_y",
+							 "eth_rgmii_rx_clk_y",
+							 "eth_rx_dv_y",
+							 "eth_rxd0_y",
+							 "eth_rxd1_y",
+							 "eth_rxd2_rgmii",
+							 "eth_rxd3_rgmii",
+							 "eth_rgmii_tx_clk",
+							 "eth_txen_y",
+							 "eth_txd0_y",
+							 "eth_txd1_y",
+							 "eth_txd2_rgmii",
+							 "eth_txd3_rgmii";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rmii_x_pins: eth-x-rmii {
+					mux {
+						groups = "eth_mdio_x",
+							 "eth_mdc_x",
+							 "eth_rgmii_rx_clk_x",
+							 "eth_rx_dv_x",
+							 "eth_rxd0_x",
+							 "eth_rxd1_x",
+							 "eth_txen_x",
+							 "eth_txd0_x",
+							 "eth_txd1_x";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rmii_y_pins: eth-y-rmii {
+					mux {
+						groups = "eth_mdio_y",
+							 "eth_mdc_y",
+							 "eth_rgmii_rx_clk_y",
+							 "eth_rx_dv_y",
+							 "eth_rxd0_y",
+							 "eth_rxd1_y",
+							 "eth_txen_y",
+							 "eth_txd0_y",
+							 "eth_txd1_y";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				mclk_b_pins: mclk_b {
+					mux {
+						groups = "mclk_b";
+						function = "mclk_b";
+						bias-disable;
+					};
+				};
+
+				mclk_c_pins: mclk_c {
+					mux {
+						groups = "mclk_c";
+						function = "mclk_c";
+						bias-disable;
+					};
+				};
+
+				pdm_dclk_a14_pins: pdm_dclk_a14 {
+					mux {
+						groups = "pdm_dclk_a14";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_dclk_a19_pins: pdm_dclk_a19 {
+					mux {
+						groups = "pdm_dclk_a19";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din0_pins: pdm_din0 {
+					mux {
+						groups = "pdm_din0";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din1_pins: pdm_din1 {
+					mux {
+						groups = "pdm_din1";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din2_pins: pdm_din2 {
+					mux {
+						groups = "pdm_din2";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din3_pins: pdm_din3 {
+					mux {
+						groups = "pdm_din3";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pwm_a_a_pins: pwm_a_a {
+					mux {
+						groups = "pwm_a_a";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_x18_pins: pwm_a_x18 {
+					mux {
+						groups = "pwm_a_x18";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_x20_pins: pwm_a_x20 {
+					mux {
+						groups = "pwm_a_x20";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_z_pins: pwm_a_z {
+					mux {
+						groups = "pwm_a_z";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_b_a_pins: pwm_b_a {
+					mux {
+						groups = "pwm_b_a";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_b_x_pins: pwm_b_x {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_b_z_pins: pwm_b_z {
+					mux {
+						groups = "pwm_b_z";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_c_a_pins: pwm_c_a {
+					mux {
+						groups = "pwm_c_a";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_c_x10_pins: pwm_c_x10 {
+					mux {
+						groups = "pwm_c_x10";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_c_x17_pins: pwm_c_x17 {
+					mux {
+						groups = "pwm_c_x17";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_d_x11_pins: pwm_d_x11 {
+					mux {
+						groups = "pwm_d_x11";
+						function = "pwm_d";
+						bias-disable;
+					};
+				};
+
+				pwm_d_x16_pins: pwm_d_x16 {
+					mux {
+						groups = "pwm_d_x16";
+						function = "pwm_d";
+						bias-disable;
+					};
+				};
+
+				sdio_pins: sdio {
+					mux-0 {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+					};
+
+					mux-1 {
+						groups = "sdio_clk";
+						function = "sdio";
+						bias-disable;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio_clk_gate {
+					mux {
+						groups = "GPIOX_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+					};
+				};
+
+				spdif_in_z_pins: spdif_in_z {
+					mux {
+						groups = "spdif_in_z";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a1_pins: spdif_in_a1 {
+					mux {
+						groups = "spdif_in_a1";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a7_pins: spdif_in_a7 {
+					mux {
+						groups = "spdif_in_a7";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a19_pins: spdif_in_a19 {
+					mux {
+						groups = "spdif_in_a19";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a20_pins: spdif_in_a20 {
+					mux {
+						groups = "spdif_in_a20";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a1_pins: spdif_out_a1 {
+					mux {
+						groups = "spdif_out_a1";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a11_pins: spdif_out_a11 {
+					mux {
+						groups = "spdif_out_a11";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a19_pins: spdif_out_a19 {
+					mux {
+						groups = "spdif_out_a19";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a20_pins: spdif_out_a20 {
+					mux {
+						groups = "spdif_out_a20";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_z_pins: spdif_out_z {
+					mux {
+						groups = "spdif_out_z";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spi0_pins: spi0 {
+					mux {
+						groups = "spi0_miso",
+							 "spi0_mosi",
+							 "spi0_clk";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss0_pins: spi0_ss0 {
+					mux {
+						groups = "spi0_ss0";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss1_pins: spi0_ss1 {
+					mux {
+						groups = "spi0_ss1";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss2_pins: spi0_ss2 {
+					mux {
+						groups = "spi0_ss2";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi1_a_pins: spi1_a {
+					mux {
+						groups = "spi1_miso_a",
+							 "spi1_mosi_a",
+							 "spi1_clk_a";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss0_a_pins: spi1_ss0_a {
+					mux {
+						groups = "spi1_ss0_a";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss1_pins: spi1_ss1 {
+					mux {
+						groups = "spi1_ss1";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_x_pins: spi1_x {
+					mux {
+						groups = "spi1_miso_x",
+							 "spi1_mosi_x",
+							 "spi1_clk_x";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss0_x_pins: spi1_ss0_x {
+					mux {
+						groups = "spi1_ss0_x";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				tdma_din0_pins: tdma_din0 {
+					mux {
+						groups = "tdma_din0";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout0_x14_pins: tdma_dout0_x14 {
+					mux {
+						groups = "tdma_dout0_x14";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout0_x15_pins: tdma_dout0_x15 {
+					mux {
+						groups = "tdma_dout0_x15";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout1_pins: tdma_dout1 {
+					mux {
+						groups = "tdma_dout1";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_din1_pins: tdma_din1 {
+					mux {
+						groups = "tdma_din1";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_fs_pins: tdma_fs {
+					mux {
+						groups = "tdma_fs";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_fs_slv_pins: tdma_fs_slv {
+					mux {
+						groups = "tdma_fs_slv";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_sclk_pins: tdma_sclk {
+					mux {
+						groups = "tdma_sclk";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_sclk_slv_pins: tdma_sclk_slv {
+					mux {
+						groups = "tdma_sclk_slv";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdmb_din0_pins: tdmb_din0 {
+					mux {
+						groups = "tdmb_din0";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din1_pins: tdmb_din1 {
+					mux {
+						groups = "tdmb_din1";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din2_pins: tdmb_din2 {
+					mux {
+						groups = "tdmb_din2";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din3_pins: tdmb_din3 {
+					mux {
+						groups = "tdmb_din3";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout0_pins: tdmb_dout0 {
+					mux {
+						groups = "tdmb_dout0";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout1_pins: tdmb_dout1 {
+					mux {
+						groups = "tdmb_dout1";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout2_pins: tdmb_dout2 {
+					mux {
+						groups = "tdmb_dout2";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout3_pins: tdmb_dout3 {
+					mux {
+						groups = "tdmb_dout3";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_fs_pins: tdmb_fs {
+					mux {
+						groups = "tdmb_fs";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_fs_slv_pins: tdmb_fs_slv {
+					mux {
+						groups = "tdmb_fs_slv";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_sclk_pins: tdmb_sclk {
+					mux {
+						groups = "tdmb_sclk";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_sclk_slv_pins: tdmb_sclk_slv {
+					mux {
+						groups = "tdmb_sclk_slv";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmc_fs_pins: tdmc_fs {
+					mux {
+						groups = "tdmc_fs";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_fs_slv_pins: tdmc_fs_slv {
+					mux {
+						groups = "tdmc_fs_slv";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_sclk_pins: tdmc_sclk {
+					mux {
+						groups = "tdmc_sclk";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_sclk_slv_pins: tdmc_sclk_slv {
+					mux {
+						groups = "tdmc_sclk_slv";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din0_pins: tdmc_din0 {
+					mux {
+						groups = "tdmc_din0";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din1_pins: tdmc_din1 {
+					mux {
+						groups = "tdmc_din1";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din2_pins: tdmc_din2 {
+					mux {
+						groups = "tdmc_din2";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din3_pins: tdmc_din3 {
+					mux {
+						groups = "tdmc_din3";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout0_pins: tdmc_dout0 {
+					mux {
+						groups = "tdmc_dout0";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout1_pins: tdmc_dout1 {
+					mux {
+						groups = "tdmc_dout1";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout2_pins: tdmc_dout2 {
+					mux {
+						groups = "tdmc_dout2";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout3_pins: tdmc_dout3 {
+					mux {
+						groups = "tdmc_dout3";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				uart_a_pins: uart_a {
+					mux {
+						groups = "uart_tx_a",
+							 "uart_rx_a";
+						function = "uart_a";
+						bias-disable;
+					};
+				};
+
+				uart_a_cts_rts_pins: uart_a_cts_rts {
+					mux {
+						groups = "uart_cts_a",
+							 "uart_rts_a";
+						function = "uart_a";
+						bias-disable;
+					};
+				};
+
+				uart_b_x_pins: uart_b_x {
+					mux {
+						groups = "uart_tx_b_x",
+							 "uart_rx_b_x";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
+					mux {
+						groups = "uart_cts_b_x",
+							 "uart_rts_b_x";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_z_pins: uart_b_z {
+					mux {
+						groups = "uart_tx_b_z",
+							 "uart_rx_b_z";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
+					mux {
+						groups = "uart_cts_b_z",
+							 "uart_rts_b_z";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_z_pins: uart_ao_b_z {
+					mux {
+						groups = "uart_ao_tx_b_z",
+							 "uart_ao_rx_b_z";
+						function = "uart_ao_b_z";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
+					mux {
+						groups = "uart_ao_cts_b_z",
+							 "uart_ao_rts_b_z";
+						function = "uart_ao_b_z";
+						bias-disable;
+					};
+				};
+			};
+		};
+
+		hiubus: bus@ff63c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff63c000 0x0 0x1c00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+			sysctrl: system-controller@0 {
+				compatible = "amlogic,meson-axg-hhi-sysctrl",
+					     "simple-mfd", "syscon";
+				reg = <0 0 0 0x400>;
+
+				clkc: clock-controller {
+					compatible = "amlogic,axg-clkc";
+					#clock-cells = <1>;
+					clocks = <&xtal>;
+					clock-names = "xtal";
+				};
+			};
+		};
+
+		mailbox: mailbox@ff63c404 {
+			compatible = "amlogic,meson-gxbb-mhu";
+			reg = <0 0xff63c404 0 0x4c>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+			#mbox-cells = <1>;
+		};
+
+		audio: bus@ff642000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff642000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
+
+			clkc_audio: clock-controller@0 {
+				compatible = "amlogic,axg-audio-clkc";
+				reg = <0x0 0x0 0x0 0xb4>;
+				#clock-cells = <1>;
+
+				clocks = <&clkc CLKID_AUDIO>,
+					 <&clkc CLKID_MPLL0>,
+					 <&clkc CLKID_MPLL1>,
+					 <&clkc CLKID_MPLL2>,
+					 <&clkc CLKID_MPLL3>,
+					 <&clkc CLKID_HIFI_PLL>,
+					 <&clkc CLKID_FCLK_DIV3>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_GP0_PLL>;
+				clock-names = "pclk",
+					      "mst_in0",
+					      "mst_in1",
+					      "mst_in2",
+					      "mst_in3",
+					      "mst_in4",
+					      "mst_in5",
+					      "mst_in6",
+					      "mst_in7";
+
+				resets = <&reset RESET_AUDIO>;
+			};
+
+			toddr_a: audio-controller@100 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x100 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_A";
+				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+				resets = <&arb AXG_ARB_TODDR_A>;
+				amlogic,fifo-depth = <512>;
+				status = "disabled";
+			};
+
+			toddr_b: audio-controller@140 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x140 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_B";
+				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+				resets = <&arb AXG_ARB_TODDR_B>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			toddr_c: audio-controller@180 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x180 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_C";
+				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+				resets = <&arb AXG_ARB_TODDR_C>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			frddr_a: audio-controller@1c0 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x1c0 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_A";
+				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+				resets = <&arb AXG_ARB_FRDDR_A>;
+				amlogic,fifo-depth = <512>;
+				status = "disabled";
+			};
+
+			frddr_b: audio-controller@200 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x200 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_B";
+				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+				resets = <&arb AXG_ARB_FRDDR_B>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			frddr_c: audio-controller@240 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x240 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_C";
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+				resets = <&arb AXG_ARB_FRDDR_C>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			arb: reset-controller@280 {
+				compatible = "amlogic,meson-axg-audio-arb";
+				reg = <0x0 0x280 0x0 0x4>;
+				#reset-cells = <1>;
+				clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+			};
+
+			tdmin_a: audio-controller@300 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x300 0x0 0x40>;
+				sound-name-prefix = "TDMIN_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_b: audio-controller@340 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x340 0x0 0x40>;
+				sound-name-prefix = "TDMIN_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_c: audio-controller@380 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x380 0x0 0x40>;
+				sound-name-prefix = "TDMIN_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_lb: audio-controller@3c0 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x3c0 0x0 0x40>;
+				sound-name-prefix = "TDMIN_LB";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			spdifin: audio-controller@400 {
+				compatible = "amlogic,axg-spdifin";
+				reg = <0x0 0x400 0x0 0x30>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFIN";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+					 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+				clock-names = "pclk", "refclk";
+				status = "disabled";
+			};
+
+			spdifout: audio-controller@480 {
+				compatible = "amlogic,axg-spdifout";
+				reg = <0x0 0x480 0x0 0x50>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFOUT";
+				clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+					 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+				clock-names = "pclk", "mclk";
+				status = "disabled";
+			};
+
+			tdmout_a: audio-controller@500 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x500 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_b: audio-controller@540 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x540 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_c: audio-controller@580 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x580 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+		};
+
+		aobus: bus@ff800000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff800000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
+				reg =  <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-axg-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+					clocks = <&xtal>, <&clkc CLKID_CLK81>;
+					clock-names = "xtal", "mpeg-clk";
+				};
+			};
+
+			pinctrl_aobus: pinctrl@14 {
+				compatible = "amlogic,meson-axg-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x00014 0x0 0x8>,
+					      <0x0 0x0002c 0x0 0x4>,
+					      <0x0 0x00024 0x0 0x8>;
+					reg-names = "mux", "pull", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_aobus 0 0 15>;
+				};
+
+				i2c_ao_sck_4_pins: i2c_ao_sck_4 {
+					mux {
+						groups = "i2c_ao_sck_4";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sck_8_pins: i2c_ao_sck_8 {
+					mux {
+						groups = "i2c_ao_sck_8";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sck_10_pins: i2c_ao_sck_10 {
+					mux {
+						groups = "i2c_ao_sck_10";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_5_pins: i2c_ao_sda_5 {
+					mux {
+						groups = "i2c_ao_sda_5";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_9_pins: i2c_ao_sda_9 {
+					mux {
+						groups = "i2c_ao_sda_9";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_11_pins: i2c_ao_sda_11 {
+					mux {
+						groups = "i2c_ao_sda_11";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				remote_input_ao_pins: remote_input_ao {
+					mux {
+						groups = "remote_input_ao";
+						function = "remote_input_ao";
+						bias-disable;
+					};
+				};
+
+				uart_ao_a_pins: uart_ao_a {
+					mux {
+						groups = "uart_ao_tx_a",
+							 "uart_ao_rx_a";
+						function = "uart_ao_a";
+						bias-disable;
+					};
+				};
+
+				uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+					mux {
+						groups = "uart_ao_cts_a",
+							 "uart_ao_rts_a";
+						function = "uart_ao_a";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_pins: uart_ao_b {
+					mux {
+						groups = "uart_ao_tx_b",
+							 "uart_ao_rx_b";
+						function = "uart_ao_b";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+					mux {
+						groups = "uart_ao_cts_b",
+							 "uart_ao_rts_b";
+						function = "uart_ao_b";
+						bias-disable;
+					};
+				};
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			pwm_AO_cd: pwm@2000 {
+				compatible = "amlogic,meson-axg-ao-pwm";
+				reg = <0x0 0x02000  0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@3000 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x3000 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4000 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x4000 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@5000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x05000 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_AO_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@7000 {
+				compatible = "amlogic,meson-axg-ao-pwm";
+				reg = <0x0 0x07000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@8000 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x8000 0x0 0x20>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-axg-saradc",
+					"amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x38>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_SAR_ADC>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@ffc01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xffc01000 0 0x1000>,
+			      <0x0 0xffc02000 0 0x2000>,
+			      <0x0 0xffc04000 0 0x2000>,
+			      <0x0 0xffc06000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		cbus: bus@ffd00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffd00000 0x0 0x25000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+
+			reset: reset-controller@1004 {
+				compatible = "amlogic,meson-axg-reset";
+				reg = <0x0 0x01004 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-axg-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
+			watchdog@f0d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0xf0d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			pwm_ab: pwm@1b000 {
+				compatible = "amlogic,meson-axg-ee-pwm";
+				reg = <0x0 0x1b000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@1a000 {
+				compatible = "amlogic,meson-axg-ee-pwm";
+				reg = <0x0 0x1a000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			spicc0: spi@13000 {
+				compatible = "amlogic,meson-axg-spicc";
+				reg = <0x0 0x13000 0x0 0x3c>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC0>;
+				clock-names = "core";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@15000 {
+				compatible = "amlogic,meson-axg-spicc";
+				reg = <0x0 0x15000 0x0 0x3c>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC1>;
+				clock-names = "core";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-axg-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
+
+			i2c3: i2c@1c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1c000 0x0 0x20>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@1d000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1d000 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@1e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@1f000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1f000 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart_B: serial@23000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x23000 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+			uart_A: serial@24000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x24000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+		};
+
+		apb: bus@ffe00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+
+			sd_emmc_b: sd@5000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x5000 0x0 0x800>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&clkc CLKID_SD_EMMC_B>,
+					<&clkc CLKID_SD_EMMC_B_CLK0>,
+					<&clkc CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				resets = <&reset RESET_SD_EMMC_B>;
+			};
+
+			sd_emmc_c: mmc@7000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x7000 0x0 0x800>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&clkc CLKID_SD_EMMC_C>,
+					<&clkc CLKID_SD_EMMC_C_CLK0>,
+					<&clkc CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				resets = <&reset RESET_SD_EMMC_C>;
+			};
+		};
+
+		sram: sram@fffc0000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0xfffc0000 0x0 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xfffc0000 0x20000>;
+
+			cpu_scp_lpri: scp-sram@13000 {
+				compatible = "amlogic,meson-axg-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-sram@13400 {
+				compatible = "amlogic,meson-axg-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12-common-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-g12-common-u-boot.dtsi
new file mode 100644
index 000000000..38fd3d3fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12-common-u-boot.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Maxime Jourdan <mjourdan@baylibre.com>
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&canvas {
+	status = "disabled";
+};
+
+&vpu {
+	reg = <0x0 0xff900000 0x0 0x100000>,
+	      <0x0 0xff63c000 0x0 0x1000>,
+	      <0x0 0xff638000 0x0 0x400>;
+	reg-names = "vpu", "hhi", "dmc";
+	u-boot,dm-pre-reloc;
+};
+
+&hdmi_tx {
+	reg = <0x0 0x0 0x0 0x10000>,
+	      <0x0 0x3c000 0x0 0x1000>;
+	reg-names = "hdmitx", "hhi";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12-common.dtsi b/roms/u-boot/arch/arm/dts/meson-g12-common.dtsi
new file mode 100644
index 000000000..1e83ec5b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12-common.dtsi
@@ -0,0 +1,2423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/clock/g12a-aoclkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			clocks = <&clkc CLKID_HDMI>,
+				 <&clkc CLKID_HTX_PCLK>,
+				 <&clkc CLKID_VPU_INTR>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				    "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			clocks = <&clkc CLKID_HDMI>,
+				 <&clkc CLKID_HTX_PCLK>,
+				 <&clkc CLKID_VPU_INTR>;
+			status = "disabled";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc CLKID_EFUSE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+	};
+
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-124999998 {
+			opp-hz = /bits/ 64 <124999998>;
+			opp-microvolt = <800000>;
+		};
+		opp-249999996 {
+			opp-hz = /bits/ 64 <249999996>;
+			opp-microvolt = <800000>;
+		};
+		opp-285714281 {
+			opp-hz = /bits/ 64 <285714281>;
+			opp-microvolt = <800000>;
+		};
+		opp-399999994 {
+			opp-hz = /bits/ 64 <399999994>;
+			opp-microvolt = <800000>;
+		};
+		opp-499999992 {
+			opp-hz = /bits/ 64 <499999992>;
+			opp-microvolt = <800000>;
+		};
+		opp-666666656 {
+			opp-hz = /bits/ 64 <666666656>;
+			opp-microvolt = <800000>;
+		};
+		opp-799999987 {
+			opp-hz = /bits/ 64 <799999987>;
+			opp-microvolt = <800000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x10000000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie: pcie@fc000000 {
+			compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
+			reg = <0x0 0xfc000000 0x0 0x400000
+			       0x0 0xff648000 0x0 0x2000
+			       0x0 0xfc400000 0x0 0x200000>;
+			reg-names = "elbi", "cfg", "config";
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000
+				  0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
+
+			clocks = <&clkc CLKID_PCIE_PHY
+				  &clkc CLKID_PCIE_COMB
+				  &clkc CLKID_PCIE_PLL>;
+			clock-names = "general",
+				      "pclk",
+				      "port";
+			resets = <&reset RESET_PCIE_CTRL_A>,
+				 <&reset RESET_PCIE_APB>;
+			reset-names = "port",
+				      "apb";
+			num-lanes = <1>;
+			phys = <&usb3_pcie_phy PHY_TYPE_PCIE>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				thermal-sensors = <&cpu_temp>;
+
+				trips {
+					cpu_passive: cpu-passive {
+						temperature = <85000>; /* millicelsius */
+						hysteresis = <2000>; /* millicelsius */
+						type = "passive";
+					};
+
+					cpu_hot: cpu-hot {
+						temperature = <95000>; /* millicelsius */
+						hysteresis = <2000>; /* millicelsius */
+						type = "hot";
+					};
+
+					cpu_critical: cpu-critical {
+						temperature = <110000>; /* millicelsius */
+						hysteresis = <2000>; /* millicelsius */
+						type = "critical";
+					};
+				};
+			};
+
+			ddr_thermal: ddr-thermal {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				thermal-sensors = <&ddr_temp>;
+
+				trips {
+					ddr_passive: ddr-passive {
+						temperature = <85000>; /* millicelsius */
+						hysteresis = <2000>; /* millicelsius */
+						type = "passive";
+					};
+
+					ddr_critical: ddr-critical {
+						temperature = <110000>; /* millicelsius */
+						hysteresis = <2000>; /* millicelsius */
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map {
+						trip = <&ddr_passive>;
+						cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
+		ethmac: ethernet@ff3f0000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
+			      <0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
+
+		apb: bus@ff600000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff600000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+			hdmi_tx: hdmi-tx@0 {
+				compatible = "amlogic,meson-g12a-dw-hdmi";
+				reg = <0x0 0x0 0x0 0x10000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+				resets = <&reset RESET_HDMITX_CAPB3>,
+					 <&reset RESET_HDMITX_PHY>,
+					 <&reset RESET_HDMITX>;
+				reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+				clocks = <&clkc CLKID_HDMI>,
+					 <&clkc CLKID_HTX_PCLK>,
+					 <&clkc CLKID_VPU_INTR>;
+				clock-names = "isfr", "iahb", "venci";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+
+				/* VPU VENC Input */
+				hdmi_tx_venc_port: port@0 {
+					reg = <0>;
+
+					hdmi_tx_in: endpoint {
+						remote-endpoint = <&hdmi_tx_out>;
+					};
+				};
+
+				/* TMDS Output */
+				hdmi_tx_tmds_port: port@1 {
+					reg = <1>;
+				};
+			};
+
+			apb_efuse: bus@30000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x30000 0x0 0x2000>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>;
+
+				hwrng: rng@218 {
+					compatible = "amlogic,meson-rng";
+					reg = <0x0 0x218 0x0 0x4>;
+				};
+			};
+
+			acodec: audio-controller@32000 {
+				compatible = "amlogic,t9015";
+				reg = <0x0 0x32000 0x0 0x14>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "ACODEC";
+				clocks = <&clkc CLKID_AUDIO_CODEC>;
+				clock-names = "pclk";
+				resets = <&reset RESET_AUDIO_CODEC>;
+				status = "disabled";
+			};
+
+			periphs: bus@34400 {
+				compatible = "simple-bus";
+				reg = <0x0 0x34400 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+
+				periphs_pinctrl: pinctrl@40 {
+					compatible = "amlogic,meson-g12a-periphs-pinctrl";
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					gpio: bank@40 {
+						reg = <0x0 0x40  0x0 0x4c>,
+						      <0x0 0xe8  0x0 0x18>,
+						      <0x0 0x120 0x0 0x18>,
+						      <0x0 0x2c0 0x0 0x40>,
+						      <0x0 0x340 0x0 0x1c>;
+						reg-names = "gpio",
+							    "pull",
+							    "pull-enable",
+							    "mux",
+							    "ds";
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-ranges = <&periphs_pinctrl 0 0 86>;
+					};
+
+					cec_ao_a_h_pins: cec_ao_a_h {
+						mux {
+							groups = "cec_ao_a_h";
+							function = "cec_ao_a_h";
+							bias-disable;
+						};
+					};
+
+					cec_ao_b_h_pins: cec_ao_b_h {
+						mux {
+							groups = "cec_ao_b_h";
+							function = "cec_ao_b_h";
+							bias-disable;
+						};
+					};
+
+					emmc_ctrl_pins: emmc-ctrl {
+						mux-0 {
+							groups = "emmc_cmd";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "emmc_clk";
+							function = "emmc";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_data_4b_pins: emmc-data-4b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_data_8b_pins: emmc-data-8b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3",
+								 "emmc_nand_d4",
+								 "emmc_nand_d5",
+								 "emmc_nand_d6",
+								 "emmc_nand_d7";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_ds_pins: emmc-ds {
+						mux {
+							groups = "emmc_nand_ds";
+							function = "emmc";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_clk_gate_pins: emmc_clk_gate {
+						mux {
+							groups = "BOOT_8";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					hdmitx_ddc_pins: hdmitx_ddc {
+						mux {
+							groups = "hdmitx_sda",
+								 "hdmitx_sck";
+							function = "hdmitx";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					hdmitx_hpd_pins: hdmitx_hpd {
+						mux {
+							groups = "hdmitx_hpd_in";
+							function = "hdmitx";
+							bias-disable;
+						};
+					};
+
+
+					i2c0_sda_c_pins: i2c0-sda-c {
+						mux {
+							groups = "i2c0_sda_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+
+						};
+					};
+
+					i2c0_sck_c_pins: i2c0-sck-c {
+						mux {
+							groups = "i2c0_sck_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z0_pins: i2c0-sda-z0 {
+						mux {
+							groups = "i2c0_sda_z0";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sck_z1_pins: i2c0-sck-z1 {
+						mux {
+							groups = "i2c0_sck_z1";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z7_pins: i2c0-sda-z7 {
+						mux {
+							groups = "i2c0_sda_z7";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z8_pins: i2c0-sda-z8 {
+						mux {
+							groups = "i2c0_sda_z8";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_x_pins: i2c1-sda-x {
+						mux {
+							groups = "i2c1_sda_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_x_pins: i2c1-sck-x {
+						mux {
+							groups = "i2c1_sck_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h2_pins: i2c1-sda-h2 {
+						mux {
+							groups = "i2c1_sda_h2";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h3_pins: i2c1-sck-h3 {
+						mux {
+							groups = "i2c1_sck_h3";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h6_pins: i2c1-sda-h6 {
+						mux {
+							groups = "i2c1_sda_h6";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h7_pins: i2c1-sck-h7 {
+						mux {
+							groups = "i2c1_sck_h7";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_x_pins: i2c2-sda-x {
+						mux {
+							groups = "i2c2_sda_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_x_pins: i2c2-sck-x {
+						mux {
+							groups = "i2c2_sck_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_z_pins: i2c2-sda-z {
+						mux {
+							groups = "i2c2_sda_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_z_pins: i2c2-sck-z {
+						mux {
+							groups = "i2c2_sck_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_h_pins: i2c3-sda-h {
+						mux {
+							groups = "i2c3_sda_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_h_pins: i2c3-sck-h {
+						mux {
+							groups = "i2c3_sck_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_a_pins: i2c3-sda-a {
+						mux {
+							groups = "i2c3_sda_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_a_pins: i2c3-sck-a {
+						mux {
+							groups = "i2c3_sck_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk0_a_pins: mclk0-a {
+						mux {
+							groups = "mclk0_a";
+							function = "mclk0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_a_pins: mclk1-a {
+						mux {
+							groups = "mclk1_a";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_x_pins: mclk1-x {
+						mux {
+							groups = "mclk1_x";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_z_pins: mclk1-z {
+						mux {
+							groups = "mclk1_z";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					nor_pins: nor {
+						mux {
+							groups = "nor_d",
+							       "nor_q",
+							       "nor_c",
+							       "nor_cs";
+							function = "nor";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_a_pins: pdm-din0-a {
+						mux {
+							groups = "pdm_din0_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_c_pins: pdm-din0-c {
+						mux {
+							groups = "pdm_din0_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_x_pins: pdm-din0-x {
+						mux {
+							groups = "pdm_din0_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_z_pins: pdm-din0-z {
+						mux {
+							groups = "pdm_din0_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_a_pins: pdm-din1-a {
+						mux {
+							groups = "pdm_din1_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_c_pins: pdm-din1-c {
+						mux {
+							groups = "pdm_din1_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_x_pins: pdm-din1-x {
+						mux {
+							groups = "pdm_din1_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_z_pins: pdm-din1-z {
+						mux {
+							groups = "pdm_din1_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_a_pins: pdm-din2-a {
+						mux {
+							groups = "pdm_din2_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_c_pins: pdm-din2-c {
+						mux {
+							groups = "pdm_din2_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_x_pins: pdm-din2-x {
+						mux {
+							groups = "pdm_din2_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_z_pins: pdm-din2-z {
+						mux {
+							groups = "pdm_din2_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_a_pins: pdm-din3-a {
+						mux {
+							groups = "pdm_din3_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_c_pins: pdm-din3-c {
+						mux {
+							groups = "pdm_din3_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_x_pins: pdm-din3-x {
+						mux {
+							groups = "pdm_din3_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_z_pins: pdm-din3-z {
+						mux {
+							groups = "pdm_din3_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_dclk_a_pins: pdm-dclk-a {
+						mux {
+							groups = "pdm_dclk_a";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_c_pins: pdm-dclk-c {
+						mux {
+							groups = "pdm_dclk_c";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_x_pins: pdm-dclk-x {
+						mux {
+							groups = "pdm_dclk_x";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_z_pins: pdm-dclk-z {
+						mux {
+							groups = "pdm_dclk_z";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pwm_a_pins: pwm-a {
+						mux {
+							groups = "pwm_a";
+							function = "pwm_a";
+							bias-disable;
+						};
+					};
+
+					pwm_b_x7_pins: pwm-b-x7 {
+						mux {
+							groups = "pwm_b_x7";
+							function = "pwm_b";
+							bias-disable;
+						};
+					};
+
+					pwm_b_x19_pins: pwm-b-x19 {
+						mux {
+							groups = "pwm_b_x19";
+							function = "pwm_b";
+							bias-disable;
+						};
+					};
+
+					pwm_c_c_pins: pwm-c-c {
+						mux {
+							groups = "pwm_c_c";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_c_x5_pins: pwm-c-x5 {
+						mux {
+							groups = "pwm_c_x5";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_c_x8_pins: pwm-c-x8 {
+						mux {
+							groups = "pwm_c_x8";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_d_x3_pins: pwm-d-x3 {
+						mux {
+							groups = "pwm_d_x3";
+							function = "pwm_d";
+							bias-disable;
+						};
+					};
+
+					pwm_d_x6_pins: pwm-d-x6 {
+						mux {
+							groups = "pwm_d_x6";
+							function = "pwm_d";
+							bias-disable;
+						};
+					};
+
+					pwm_e_pins: pwm-e {
+						mux {
+							groups = "pwm_e";
+							function = "pwm_e";
+							bias-disable;
+						};
+					};
+
+					pwm_f_x_pins: pwm-f-x {
+						mux {
+							groups = "pwm_f_x";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_h_pins: pwm-f-h {
+						mux {
+							groups = "pwm_f_h";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					sdcard_c_pins: sdcard_c {
+						mux-0 {
+							groups = "sdcard_d0_c",
+								 "sdcard_d1_c",
+								 "sdcard_d2_c",
+								 "sdcard_d3_c",
+								 "sdcard_cmd_c";
+							function = "sdcard";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "sdcard_clk_c";
+							function = "sdcard";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_clk_gate_c_pins: sdcard_clk_gate_c {
+						mux {
+							groups = "GPIOC_4";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_z_pins: sdcard_z {
+						mux-0 {
+							groups = "sdcard_d0_z",
+								 "sdcard_d1_z",
+								 "sdcard_d2_z",
+								 "sdcard_d3_z",
+								 "sdcard_cmd_z";
+							function = "sdcard";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "sdcard_clk_z";
+							function = "sdcard";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_clk_gate_z_pins: sdcard_clk_gate_z {
+						mux {
+							groups = "GPIOZ_6";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdio_pins: sdio {
+						mux {
+							groups = "sdio_d0",
+								 "sdio_d1",
+								 "sdio_d2",
+								 "sdio_d3",
+								 "sdio_clk",
+								 "sdio_cmd";
+							function = "sdio";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdio_clk_gate_pins: sdio_clk_gate {
+						mux {
+							groups = "GPIOX_4";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spdif_in_a10_pins: spdif-in-a10 {
+						mux {
+							groups = "spdif_in_a10";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_a12_pins: spdif-in-a12 {
+						mux {
+							groups = "spdif_in_a12";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_h_pins: spdif-in-h {
+						mux {
+							groups = "spdif_in_h";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_out_h_pins: spdif-out-h {
+						mux {
+							groups = "spdif_out_h";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a11_pins: spdif-out-a11 {
+						mux {
+							groups = "spdif_out_a11";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a13_pins: spdif-out-a13 {
+						mux {
+							groups = "spdif_out_a13";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spicc0_x_pins: spicc0-x {
+						mux {
+							groups = "spi0_mosi_x",
+							       "spi0_miso_x",
+							       "spi0_clk_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_ss0_x_pins: spicc0-ss0-x {
+						mux {
+							groups = "spi0_ss0_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_c_pins: spicc0-c {
+						mux {
+							groups = "spi0_mosi_c",
+							       "spi0_miso_c",
+							       "spi0_ss0_c",
+							       "spi0_clk_c";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc1_pins: spicc1 {
+						mux {
+							groups = "spi1_mosi",
+							       "spi1_miso",
+							       "spi1_clk";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spicc1_ss0_pins: spicc1-ss0 {
+						mux {
+							groups = "spi1_ss0";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					tdm_a_din0_pins: tdm-a-din0 {
+						mux {
+							groups = "tdm_a_din0";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_din1_pins: tdm-a-din1 {
+						mux {
+							groups = "tdm_a_din1";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_a_dout0_pins: tdm-a-dout0 {
+						mux {
+							groups = "tdm_a_dout0";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_dout1_pins: tdm-a-dout1 {
+						mux {
+							groups = "tdm_a_dout1";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_fs_pins: tdm-a-fs {
+						mux {
+							groups = "tdm_a_fs";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_sclk_pins: tdm-a-sclk {
+						mux {
+							groups = "tdm_a_sclk";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_slv_fs_pins: tdm-a-slv-fs {
+						mux {
+							groups = "tdm_a_slv_fs";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_slv_sclk_pins: tdm-a-slv-sclk {
+						mux {
+							groups = "tdm_a_slv_sclk";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din0_pins: tdm-b-din0 {
+						mux {
+							groups = "tdm_b_din0";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din1_pins: tdm-b-din1 {
+						mux {
+							groups = "tdm_b_din1";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din2_pins: tdm-b-din2 {
+						mux {
+							groups = "tdm_b_din2";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_a_pins: tdm-b-din3-a {
+						mux {
+							groups = "tdm_b_din3_a";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_h_pins: tdm-b-din3-h {
+						mux {
+							groups = "tdm_b_din3_h";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_dout0_pins: tdm-b-dout0 {
+						mux {
+							groups = "tdm_b_dout0";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout1_pins: tdm-b-dout1 {
+						mux {
+							groups = "tdm_b_dout1";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout2_pins: tdm-b-dout2 {
+						mux {
+							groups = "tdm_b_dout2";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_a_pins: tdm-b-dout3-a {
+						mux {
+							groups = "tdm_b_dout3_a";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_h_pins: tdm-b-dout3-h {
+						mux {
+							groups = "tdm_b_dout3_h";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_fs_pins: tdm-b-fs {
+						mux {
+							groups = "tdm_b_fs";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_sclk_pins: tdm-b-sclk {
+						mux {
+							groups = "tdm_b_sclk";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_slv_fs_pins: tdm-b-slv-fs {
+						mux {
+							groups = "tdm_b_slv_fs";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_slv_sclk_pins: tdm-b-slv-sclk {
+						mux {
+							groups = "tdm_b_slv_sclk";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_a_pins: tdm-c-din0-a {
+						mux {
+							groups = "tdm_c_din0_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_z_pins: tdm-c-din0-z {
+						mux {
+							groups = "tdm_c_din0_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_a_pins: tdm-c-din1-a {
+						mux {
+							groups = "tdm_c_din1_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_z_pins: tdm-c-din1-z {
+						mux {
+							groups = "tdm_c_din1_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_a_pins: tdm-c-din2-a {
+						mux {
+							groups = "tdm_c_din2_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					eth_leds_pins: eth-leds {
+						mux {
+							groups = "eth_link_led",
+								 "eth_act_led";
+							function = "eth";
+							bias-disable;
+						};
+					};
+
+					eth_pins: eth {
+						mux {
+							groups = "eth_mdio",
+								 "eth_mdc",
+								 "eth_rgmii_rx_clk",
+								 "eth_rx_dv",
+								 "eth_rxd0",
+								 "eth_rxd1",
+								 "eth_txen",
+								 "eth_txd0",
+								 "eth_txd1";
+							function = "eth";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					eth_rgmii_pins: eth-rgmii {
+						mux {
+							groups = "eth_rxd2_rgmii",
+								 "eth_rxd3_rgmii",
+								 "eth_rgmii_tx_clk",
+								 "eth_txd2_rgmii",
+								 "eth_txd3_rgmii";
+							function = "eth";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_z_pins: tdm-c-din2-z {
+						mux {
+							groups = "tdm_c_din2_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_a_pins: tdm-c-din3-a {
+						mux {
+							groups = "tdm_c_din3_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_z_pins: tdm-c-din3-z {
+						mux {
+							groups = "tdm_c_din3_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_dout0_a_pins: tdm-c-dout0-a {
+						mux {
+							groups = "tdm_c_dout0_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout0_z_pins: tdm-c-dout0-z {
+						mux {
+							groups = "tdm_c_dout0_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_a_pins: tdm-c-dout1-a {
+						mux {
+							groups = "tdm_c_dout1_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_z_pins: tdm-c-dout1-z {
+						mux {
+							groups = "tdm_c_dout1_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_a_pins: tdm-c-dout2-a {
+						mux {
+							groups = "tdm_c_dout2_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_z_pins: tdm-c-dout2-z {
+						mux {
+							groups = "tdm_c_dout2_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_a_pins: tdm-c-dout3-a {
+						mux {
+							groups = "tdm_c_dout3_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_z_pins: tdm-c-dout3-z {
+						mux {
+							groups = "tdm_c_dout3_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_a_pins: tdm-c-fs-a {
+						mux {
+							groups = "tdm_c_fs_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_z_pins: tdm-c-fs-z {
+						mux {
+							groups = "tdm_c_fs_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_a_pins: tdm-c-sclk-a {
+						mux {
+							groups = "tdm_c_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_z_pins: tdm-c-sclk-z {
+						mux {
+							groups = "tdm_c_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a {
+						mux {
+							groups = "tdm_c_slv_fs_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z {
+						mux {
+							groups = "tdm_c_slv_fs_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a {
+						mux {
+							groups = "tdm_c_slv_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z {
+						mux {
+							groups = "tdm_c_slv_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					uart_a_pins: uart-a {
+						mux {
+							groups = "uart_a_tx",
+								 "uart_a_rx";
+							function = "uart_a";
+							bias-disable;
+						};
+					};
+
+					uart_a_cts_rts_pins: uart-a-cts-rts {
+						mux {
+							groups = "uart_a_cts",
+								 "uart_a_rts";
+							function = "uart_a";
+							bias-disable;
+						};
+					};
+
+					uart_b_pins: uart-b {
+						mux {
+							groups = "uart_b_tx",
+								 "uart_b_rx";
+							function = "uart_b";
+							bias-disable;
+						};
+					};
+
+					uart_c_pins: uart-c {
+						mux {
+							groups = "uart_c_tx",
+								 "uart_c_rx";
+							function = "uart_c";
+							bias-disable;
+						};
+					};
+
+					uart_c_cts_rts_pins: uart-c-cts-rts {
+						mux {
+							groups = "uart_c_cts",
+								 "uart_c_rts";
+							function = "uart_c";
+							bias-disable;
+						};
+					};
+				};
+			};
+
+			cpu_temp: temperature-sensor@34800 {
+				compatible = "amlogic,g12a-cpu-thermal",
+					     "amlogic,g12a-thermal";
+				reg = <0x0 0x34800 0x0 0x50>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			ddr_temp: temperature-sensor@34c00 {
+				compatible = "amlogic,g12a-ddr-thermal",
+					     "amlogic,g12a-thermal";
+				reg = <0x0 0x34c00 0x0 0x50>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			usb2_phy0: phy@36000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x36000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY20>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			dmc: bus@38000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x38000 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+
+				canvas: video-lut@48 {
+					compatible = "amlogic,canvas";
+					reg = <0x0 0x48 0x0 0x14>;
+				};
+			};
+
+			usb2_phy1: phy@3a000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x3a000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY21>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			hiu: bus@3c000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x3c000 0x0 0x1400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+
+				hhi: system-controller@0 {
+					compatible = "amlogic,meson-gx-hhi-sysctrl",
+						     "simple-mfd", "syscon";
+					reg = <0 0 0 0x400>;
+
+					clkc: clock-controller {
+						compatible = "amlogic,g12a-clkc";
+						#clock-cells = <1>;
+						clocks = <&xtal>;
+						clock-names = "xtal";
+					};
+
+					pwrc: power-controller {
+						compatible = "amlogic,meson-g12a-pwrc";
+						#power-domain-cells = <1>;
+						amlogic,ao-sysctrl = <&rti>;
+						resets = <&reset RESET_VIU>,
+							 <&reset RESET_VENC>,
+							 <&reset RESET_VCBUS>,
+							 <&reset RESET_BT656>,
+							 <&reset RESET_RDMA>,
+							 <&reset RESET_VENCI>,
+							 <&reset RESET_VENCP>,
+							 <&reset RESET_VDAC>,
+							 <&reset RESET_VDI6>,
+							 <&reset RESET_VENCL>,
+							 <&reset RESET_VID_LOCK>;
+						reset-names = "viu", "venc", "vcbus", "bt656",
+							      "rdma", "venci", "vencp", "vdac",
+							      "vdi6", "vencl", "vid_lock";
+						clocks = <&clkc CLKID_VPU>,
+							 <&clkc CLKID_VAPB>;
+						clock-names = "vpu", "vapb";
+						/*
+						 * VPU clocking is provided by two identical clock paths
+						 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+						 * free mux to safely change frequency while running.
+						 * Same for VAPB but with a final gate after the glitch free mux.
+						 */
+						assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+								  <&clkc CLKID_VPU_0>,
+								  <&clkc CLKID_VPU>, /* Glitch free mux */
+								  <&clkc CLKID_VAPB_0_SEL>,
+								  <&clkc CLKID_VAPB_0>,
+								  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+						assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VPU_0>,
+									 <&clkc CLKID_FCLK_DIV4>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VAPB_0>;
+						assigned-clock-rates = <0>, /* Do Nothing */
+								       <666666666>,
+								       <0>, /* Do Nothing */
+								       <0>, /* Do Nothing */
+								       <250000000>,
+								       <0>; /* Do Nothing */
+					};
+				};
+			};
+
+			usb3_pcie_phy: phy@46000 {
+				compatible = "amlogic,g12a-usb3-pcie-phy";
+				reg = <0x0 0x46000 0x0 0x2000>;
+				clocks = <&clkc CLKID_PCIE_PLL>;
+				clock-names = "ref_clk";
+				resets = <&reset RESET_PCIE_PHY>;
+				reset-names = "phy";
+				assigned-clocks = <&clkc CLKID_PCIE_PLL>;
+				assigned-clock-rates = <100000000>;
+				#phy-cells = <1>;
+			};
+
+			eth_phy: mdio-multiplexer@4c000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x4c000 0x0 0xa4>;
+				clocks = <&clkc CLKID_ETH_PHY>,
+					 <&xtal>,
+					 <&clkc CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet_phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+		};
+
+		aobus: bus@ff800000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff800000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+			rti: sys-ctrl@0 {
+				compatible = "amlogic,meson-gx-ao-sysctrl",
+					     "simple-mfd", "syscon";
+				reg = <0x0 0x0 0x0 0x100>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-g12a-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+					clocks = <&xtal>, <&clkc CLKID_CLK81>;
+					clock-names = "xtal", "mpeg-clk";
+				};
+
+				ao_pinctrl: pinctrl@14 {
+					compatible = "amlogic,meson-g12a-aobus-pinctrl";
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					gpio_ao: bank@14 {
+						reg = <0x0 0x14 0x0 0x8>,
+						      <0x0 0x1c 0x0 0x8>,
+						      <0x0 0x24 0x0 0x14>;
+						reg-names = "mux",
+							    "ds",
+							    "gpio";
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-ranges = <&ao_pinctrl 0 0 15>;
+					};
+
+					i2c_ao_sck_pins: i2c_ao_sck_pins {
+						mux {
+							groups = "i2c_ao_sck";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_pins: i2c_ao_sda {
+						mux {
+							groups = "i2c_ao_sda";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sck_e_pins: i2c_ao_sck_e {
+						mux {
+							groups = "i2c_ao_sck_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_e_pins: i2c_ao_sda_e {
+						mux {
+							groups = "i2c_ao_sda_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk0_ao_pins: mclk0-ao {
+						mux {
+							groups = "mclk0_ao";
+							function = "mclk0_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+						mux {
+							groups = "tdm_ao_b_din0";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					spdif_ao_out_pins: spdif-ao-out {
+						mux {
+							groups = "spdif_ao_out";
+							function = "spdif_ao_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+						mux {
+							groups = "tdm_ao_b_din1";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+						mux {
+							groups = "tdm_ao_b_din2";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+						mux {
+							groups = "tdm_ao_b_dout0";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+						mux {
+							groups = "tdm_ao_b_dout1";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+						mux {
+							groups = "tdm_ao_b_dout2";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_fs_pins: tdm-ao-b-fs {
+						mux {
+							groups = "tdm_ao_b_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+						mux {
+							groups = "tdm_ao_b_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+						mux {
+							groups = "tdm_ao_b_slv_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+						mux {
+							groups = "tdm_ao_b_slv_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_a_pins: uart-a-ao {
+						mux {
+							groups = "uart_ao_a_tx",
+								 "uart_ao_a_rx";
+							function = "uart_ao_a";
+							bias-disable;
+						};
+					};
+
+					uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
+						mux {
+							groups = "uart_ao_a_cts",
+								 "uart_ao_a_rts";
+							function = "uart_ao_a";
+							bias-disable;
+						};
+					};
+
+					pwm_a_e_pins: pwm-a-e {
+						mux {
+							groups = "pwm_a_e";
+							function = "pwm_a_e";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_a_pins: pwm-ao-a {
+						mux {
+							groups = "pwm_ao_a";
+							function = "pwm_ao_a";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_b_pins: pwm-ao-b {
+						mux {
+							groups = "pwm_ao_b";
+							function = "pwm_ao_b";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_c_4_pins: pwm-ao-c-4 {
+						mux {
+							groups = "pwm_ao_c_4";
+							function = "pwm_ao_c";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_c_6_pins: pwm-ao-c-6 {
+						mux {
+							groups = "pwm_ao_c_6";
+							function = "pwm_ao_c";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_5_pins: pwm-ao-d-5 {
+						mux {
+							groups = "pwm_ao_d_5";
+							function = "pwm_ao_d";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_10_pins: pwm-ao-d-10 {
+						mux {
+							groups = "pwm_ao_d_10";
+							function = "pwm_ao_d";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_e_pins: pwm-ao-d-e {
+						mux {
+							groups = "pwm_ao_d_e";
+							function = "pwm_ao_d";
+						};
+					};
+
+					remote_input_ao_pins: remote-input-ao {
+						mux {
+							groups = "remote_ao_input";
+							function = "remote_ao_input";
+							bias-disable;
+						};
+					};
+				};
+			};
+
+			vrtc: rtc@0a8 {
+				compatible = "amlogic,meson-vrtc";
+				reg = <0x0 0x000a8 0x0 0x4>;
+			};
+
+			cec_AO: cec@100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CEC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			cecb_AO: cec@280 {
+				compatible = "amlogic,meson-g12a-ao-cec";
+				reg = <0x0 0x00280 0x0 0x1c>;
+				interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>;
+				clock-names = "oscin";
+				status = "disabled";
+			};
+
+			pwm_AO_cd: pwm@2000 {
+				compatible = "amlogic,meson-g12a-ao-pwm-cd";
+				reg = <0x0 0x2000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@3000 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x3000 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4000 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x4000 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@5000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x05000 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			pwm_AO_ab: pwm@7000 {
+				compatible = "amlogic,meson-g12a-ao-pwm-ab";
+				reg = <0x0 0x7000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@8000 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x8000 0x0 0x20>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-g12a-saradc",
+					     "amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x48>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_SAR_ADC>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
+		};
+
+		vdec: video-decoder@ff620000 {
+			compatible = "amlogic,g12a-vdec";
+			reg = <0x0 0xff620000 0x0 0x10000>,
+			      <0x0 0xffd0e180 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&rti>;
+			amlogic,canvas = <&canvas>;
+
+			clocks = <&clkc CLKID_PARSER>,
+				 <&clkc CLKID_DOS>,
+				 <&clkc CLKID_VDEC_1>,
+				 <&clkc CLKID_VDEC_HEVC>,
+				 <&clkc CLKID_VDEC_HEVCF>;
+			clock-names = "dos_parser", "dos", "vdec_1",
+				      "vdec_hevc", "vdec_hevcf";
+			resets = <&reset RESET_PARSER>;
+			reset-names = "esparser";
+		};
+
+		vpu: vpu@ff900000 {
+			compatible = "amlogic,meson-g12a-vpu";
+			reg = <0x0 0xff900000 0x0 0x100000>,
+			      <0x0 0xff63c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port@1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
+		};
+
+		gic: interrupt-controller@ffc01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xffc01000 0 0x1000>,
+			      <0x0 0xffc02000 0 0x2000>,
+			      <0x0 0xffc04000 0 0x2000>,
+			      <0x0 0xffc06000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		cbus: bus@ffd00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffd00000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
+
+			reset: reset-controller@1004 {
+				compatible = "amlogic,meson-axg-reset";
+				reg = <0x0 0x1004 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-g12a-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
+			spicc0: spi@13000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x13000 0x0 0x44>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC0>,
+					 <&clkc CLKID_SPICC0_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@15000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x15000 0x0 0x44>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC1>,
+					 <&clkc CLKID_SPICC1_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@14000 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				status = "disabled";
+				reg = <0x0 0x14000 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_CLK81>;
+			};
+
+			pwm_ef: pwm@19000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x19000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@1a000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x1a000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@1b000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x1b000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@1c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1c000 0x0 0x20>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c2: i2c@1d000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1d000 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c1: i2c@1e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c0: i2c@1f000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1f000 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-g12a-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
+
+			uart_C: serial@22000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x22000 0x0 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_B: serial@23000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x23000 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_A: serial@24000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x24000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+
+		sd_emmc_a: sd@ffe03000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe03000 0x0 0x800>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_A>,
+				 <&clkc CLKID_SD_EMMC_A_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+		};
+
+		sd_emmc_b: sd@ffe05000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe05000 0x0 0x800>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_B>,
+				 <&clkc CLKID_SD_EMMC_B_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+		};
+
+		sd_emmc_c: mmc@ffe07000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe07000 0x0 0x800>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_C>,
+				 <&clkc CLKID_SD_EMMC_C_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_C>;
+		};
+
+		usb: usb@ffe09000 {
+			status = "disabled";
+			compatible = "amlogic,meson-g12a-usb-ctrl";
+			reg = <0x0 0xffe09000 0x0 0xa0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>;
+			resets = <&reset RESET_USB>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>,
+			       <&usb3_pcie_phy PHY_TYPE_USB3>;
+			phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
+
+			dwc2: usb@ff400000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xff400000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@ff500000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff500000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment;
+				snps,parkmode-disable-ss-quirk;
+			};
+		};
+
+		mali: gpu@ffe40000 {
+			compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+			reg = <0x0 0xffe40000 0x0 0x40000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&clkc CLKID_MALI>;
+			resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12.dtsi b/roms/u-boot/arch/arm/dts/meson-g12.dtsi
new file mode 100644
index 000000000..6a1f4dcf6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12.dtsi
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include "meson-g12-common.dtsi"
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/power/meson-g12a-power.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+/ {
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+};
+
+&apb {
+	pdm: audio-controller@40000 {
+		compatible = "amlogic,g12a-pdm",
+			     "amlogic,axg-pdm";
+		reg = <0x0 0x40000 0x0 0x34>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "PDM";
+		clocks = <&clkc_audio AUD_CLKID_PDM>,
+			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
+		status = "disabled";
+	};
+
+	audio: bus@42000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x42000 0x0 0x2000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
+
+		clkc_audio: clock-controller@0 {
+			status = "disabled";
+			compatible = "amlogic,g12a-audio-clkc";
+			reg = <0x0 0x0 0x0 0xb4>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clocks = <&clkc CLKID_AUDIO>,
+				 <&clkc CLKID_MPLL0>,
+				 <&clkc CLKID_MPLL1>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_MPLL3>,
+				 <&clkc CLKID_HIFI_PLL>,
+				 <&clkc CLKID_FCLK_DIV3>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <&clkc CLKID_GP0_PLL>;
+			clock-names = "pclk",
+				      "mst_in0",
+				      "mst_in1",
+				      "mst_in2",
+				      "mst_in3",
+				      "mst_in4",
+				      "mst_in5",
+				      "mst_in6",
+				      "mst_in7";
+
+			resets = <&reset RESET_AUDIO>;
+		};
+
+		toddr_a: audio-controller@100 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x100 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_A";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+			resets = <&arb AXG_ARB_TODDR_A>,
+				 <&clkc_audio AUD_RESET_TODDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		toddr_b: audio-controller@140 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x140 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_B";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+			resets = <&arb AXG_ARB_TODDR_B>,
+				 <&clkc_audio AUD_RESET_TODDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		toddr_c: audio-controller@180 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x180 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_C";
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+			resets = <&arb AXG_ARB_TODDR_C>,
+				 <&clkc_audio AUD_RESET_TODDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_a: audio-controller@1c0 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x1c0 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_A";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+			resets = <&arb AXG_ARB_FRDDR_A>,
+				 <&clkc_audio AUD_RESET_FRDDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		frddr_b: audio-controller@200 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x200 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_B";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+			resets = <&arb AXG_ARB_FRDDR_B>,
+				 <&clkc_audio AUD_RESET_FRDDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_c: audio-controller@240 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x240 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_C";
+			interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+			resets = <&arb AXG_ARB_FRDDR_C>,
+				 <&clkc_audio AUD_RESET_FRDDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		arb: reset-controller@280 {
+			status = "disabled";
+			compatible = "amlogic,meson-axg-audio-arb";
+			reg = <0x0 0x280 0x0 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+		};
+
+		tdmin_a: audio-controller@300 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x300 0x0 0x40>;
+			sound-name-prefix = "TDMIN_A";
+			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_b: audio-controller@340 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x340 0x0 0x40>;
+			sound-name-prefix = "TDMIN_B";
+			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_c: audio-controller@380 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x380 0x0 0x40>;
+			sound-name-prefix = "TDMIN_C";
+			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_lb: audio-controller@3c0 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x3c0 0x0 0x40>;
+			sound-name-prefix = "TDMIN_LB";
+			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		spdifin: audio-controller@400 {
+			compatible = "amlogic,g12a-spdifin",
+				     "amlogic,axg-spdifin";
+			reg = <0x0 0x400 0x0 0x30>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFIN";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+				 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+			clock-names = "pclk", "refclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFIN>;
+			status = "disabled";
+		};
+
+		spdifout: audio-controller@480 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x480 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+				 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
+			status = "disabled";
+		};
+
+		tdmout_a: audio-controller@500 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x500 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_A";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_b: audio-controller@540 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x540 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_B";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_c: audio-controller@580 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x580 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_C";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		spdifout_b: audio-controller@680 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x680 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT_B";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
+				 <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
+			status = "disabled";
+		};
+
+		toacodec: audio-controller@740 {
+			compatible = "amlogic,g12a-toacodec";
+			reg = <0x0 0x740 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOACODEC";
+			resets = <&clkc_audio AUD_RESET_TOACODEC>;
+			status = "disabled";
+		};
+
+		tohdmitx: audio-controller@744 {
+			compatible = "amlogic,g12a-tohdmitx";
+			reg = <0x0 0x744 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOHDMITX";
+			resets = <&clkc_audio AUD_RESET_TOHDMITX>;
+			status = "disabled";
+		};
+	};
+};
+
+&ethmac {
+	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
+&sd_emmc_a {
+	amlogic,dram-access-quirk;
+};
+
+&simplefb_cvbs {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
+&simplefb_hdmi {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/meson-g12a-sei510-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-g12a-sei510-u-boot.dtsi
new file mode 100644
index 000000000..236f2468d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12a-sei510-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-g12a-sei510.dts b/roms/u-boot/arch/arm/dts/meson-g12a-sei510.dts
new file mode 100644
index 000000000..b00d0468c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12a-sei510.dts
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "seirobotics,sei510", "amlogic,g12a";
+	model = "SEI Robotics SEI510";
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-onoff {
+			label = "On/Off";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <1700000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	mono_dac: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "U16";
+		sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+	};
+
+	dmics: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regultor-vddao_3v3_t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		/* TEE Reserved Memory */
+		bl32_reserved: bl32@5000000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12A-SEI510";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+				 <&tdmin_a>, <&tdmin_b>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* internal speaker interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&mono_dac>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* internal digital mics */
+		dai-link-8 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12a-u200-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-g12a-u200-u-boot.dtsi
new file mode 100644
index 000000000..236f2468d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12a-u200-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-g12a-u200.dts b/roms/u-boot/arch/arm/dts/meson-g12a-u200.dts
new file mode 100644
index 000000000..a26bfe725
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12a-u200.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	compatible = "amlogic,u200", "amlogic,g12a";
+	model = "Amlogic Meson G12A U200 Development Board";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c Touch */
+&i2c0 {
+	status = "okay";
+	pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c CM */
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c Audio */
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12a.dtsi b/roms/u-boot/arch/arm/dts/meson-g12a.dtsi
new file mode 100644
index 000000000..fb0ab27d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12a.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include "meson-g12.dtsi"
+
+/ {
+	compatible = "amlogic,g12a";
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <831000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <981000>;
+		};
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-a311d-khadas-vim3-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-a311d-khadas-vim3-u-boot.dtsi
new file mode 100644
index 000000000..489efa150
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-a311d-khadas-vim3-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common-u-boot.dtsi"
+#include "meson-khadas-vim3-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts b/roms/u-boot/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
new file mode 100644
index 000000000..124a80901
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-khadas-vim3.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-a311d.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-a311d.dtsi
new file mode 100644
index 000000000..d61f43052
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-a311d.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <811000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <901000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <951000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1001000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <831000>;
+		};
+
+                opp-1908000000 {
+                        opp-hz = /bits/ 64 <1908000000>;
+                        opp-microvolt = <861000>;
+                };
+
+                opp-2016000000 {
+                        opp-hz = /bits/ 64 <2016000000>;
+                        opp-microvolt = <911000>;
+                };
+
+                opp-2108000000 {
+                        opp-hz = /bits/ 64 <2108000000>;
+                        opp-microvolt = <951000>;
+                };
+
+                opp-2208000000 {
+                        opp-hz = /bits/ 64 <2208000000>;
+                        opp-microvolt = <1011000>;
+                };
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-gtking-pro-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-gtking-pro-u-boot.dtsi
new file mode 100644
index 000000000..236f2468d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-gtking-pro-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-gtking-pro.dts b/roms/u-boot/arch/arm/dts/meson-g12b-gtking-pro.dts
new file mode 100644
index 000000000..f0c56a16a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-gtking-pro.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "azw,gtking", "amlogic,g12b";
+	model = "Beelink GT-King Pro";
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		white {
+			label = "power:white";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12B-GTKING-PRO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-gtking-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-gtking-u-boot.dtsi
new file mode 100644
index 000000000..236f2468d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-gtking-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-gtking.dts b/roms/u-boot/arch/arm/dts/meson-g12b-gtking.dts
new file mode 100644
index 000000000..eeb7bc553
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-gtking.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "azw,gtking", "amlogic,g12b";
+	model = "Beelink GT-King";
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12B-GTKING";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-khadas-vim3.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
new file mode 100644
index 000000000..f42cf4b8a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/ {
+	model = "Khadas VIM3";
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2-plus.dts b/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
new file mode 100644
index 000000000..5de2815ba
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2Plus";
+};
+
+&vddcpu_a {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
+&vddcpu_b {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2-u-boot.dtsi
new file mode 100644
index 000000000..a92f9e9ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common-u-boot.dtsi"
+
+/* SARADC is needed for proper board variant detection */
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2.dts b/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2.dts
new file mode 100644
index 000000000..a198a9125
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2.dtsi
new file mode 100644
index 000000000..6982632ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-odroid-n2.dtsi
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	dioo2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "U19";
+		status = "okay";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "n2:blue";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&main_12v>;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8120B1ABC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hub_5v: regulator-hub_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HUB_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the Hub CHIPENABLE, LOW sets low power state */
+		gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the microUSB port power enable */
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12B-ODROID-N2";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
+				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
+				 <&dioo2133>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"U19 INL", "ACODEC LOLP",
+				"U19 INR", "ACODEC LORP",
+				"Lineout", "U19 OUTL",
+				"Lineout", "U19 OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		/* i2s jack output interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		/* acodec glue */
+		dai-link-9 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */	
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	mx25u64: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+	/* Enable the hub which is connected to this port */
+	phy-supply = <&hub_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-s922x.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-s922x.dtsi
new file mode 100644
index 000000000..1e5d0ee5d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-s922x.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <831000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1896000000 {
+			opp-hz = /bits/ 64 <1896000000>;
+			opp-microvolt = <981000>;
+		};
+
+		opp-1992000000 {
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1001000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <821000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <891000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <981000>;
+		};
+
+		opp-1908000000 {
+			opp-hz = /bits/ 64 <1908000000>;
+			opp-microvolt = <1022000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b-w400.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b-w400.dtsi
new file mode 100644
index 000000000..2802ddbb8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b-w400.dtsi
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b.dtsi"
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP1653 Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * MP1652 Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb1_pow: regulator-usb1-pow {
+		compatible = "regulator-fixed";
+		regulator-name = "USB1_POW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* connected to SY6280A Power Switch */
+		gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_pwr_en: regulator-usb-pwr-en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to USB3 Type-A Port power enable */
+		gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&usb1_pow>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb1_pow>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-g12b.dtsi b/roms/u-boot/arch/arm/dts/meson-g12b.dtsi
new file mode 100644
index 000000000..9b8548e5f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-g12b.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12.dtsi"
+
+/ {
+	compatible = "amlogic,g12b";
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu100>;
+				};
+
+				core1 {
+					cpu = <&cpu101>;
+				};
+
+				core2 {
+					cpu = <&cpu102>;
+				};
+
+				core3 {
+					cpu = <&cpu103>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <592>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <592>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu102: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu103: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+};
+
+&clkc {
+	compatible = "amlogic,g12b-clkc";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gx-libretech-pc.dtsi b/roms/u-boot/arch/arm/dts/meson-gx-libretech-pc.dtsi
new file mode 100644
index 000000000..c2480bab8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gx-libretech-pc.dtsi
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		update-button {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1300000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&vcc5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXL-LIBRETECH-S9XX-PC";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Speaker", "7J4-14 LEFT",
+				"Speaker", "7J4-11 RIGHT";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"7J4-14 LEFT", "AU2 OUTL",
+				"7J4-11 RIGHT", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_phy_irq_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		reg = <0>;
+		max-speed = <1000>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the reset pin of the usb HUB is driven high to take
+	 * it out of reset.
+	 */
+	usb1_rst_pins: usb1_rst_irq {
+		mux {
+			groups = "GPIODV_3";
+			function = "gpio_periphs";
+			bias-disable;
+			output-high;
+		};
+	};
+
+	/* Make sure the phy irq pin is properly configured as input */
+	eth_phy_irq_pins: eth_phy_irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc5v>;
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_C {
+	pinctrl-0 = <&i2c_c_dv18_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc: rtc@51 {
+		reg = <0x51>;
+		compatible = "nxp,pcf8563";
+		#clock-cells = <0>;
+		clock-output-names = "rtc_clkout";
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_3_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	status = "okay";
+};
+
+&spifc {
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	gd25lq128: spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb1_rst_pins>;
+	pinctrl-names = "default";
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gx-mali450.dtsi b/roms/u-boot/arch/arm/dts/meson-gx-mali450.dtsi
new file mode 100644
index 000000000..f9771b51c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gx-mali450.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+		opp-744000000 {
+			opp-hz = /bits/ 64 <744000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gx-p23x-q20x.dtsi b/roms/u-boot/arch/arm/dts/meson-gx-p23x-q20x.dtsi
new file mode 100644
index 000000000..6b57e15aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gx-p23x-q20x.dtsi
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
+ * the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
+ */
+
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GX-P230-Q200";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLP",
+				"AU2 INR", "ACODEC LORP",
+				"AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-5 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gx-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gx-u-boot.dtsi
new file mode 100644
index 000000000..17d2cb95c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gx-u-boot.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Maxime Jourdan <mjourdan@baylibre.com>
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&vpu {
+	reg = <0x0 0xd0100000 0x0 0x100000>,
+	      <0x0 0xc883c000 0x0 0x1000>,
+	      <0x0 0xc8838000 0x0 0x1000>;
+	reg-names = "vpu", "hhi", "dmc";
+	u-boot,dm-pre-reloc;
+};
+
+&hdmi_tx {
+	reg = <0x0 0xc883a000 0x0 0x1c>,
+	      <0x0 0xc883c000 0x0 0x1000>;
+	reg-names = "hdmitx", "hhi";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gx.dtsi b/roms/u-boot/arch/arm/dts/meson-gx.dtsi
new file mode 100644
index 000000000..0edd13715
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gx.dtsi
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-gxbb-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@10000000 {
+			reg = <0x0 0x10000000 0x0 0x200000>;
+			no-map;
+		};
+
+		/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved_alt: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x10000000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&scpi_sensors 0>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks@0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: bus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			gpio_intc: interrupt-controller@9880 {
+				compatible = "amlogic,meson-gpio-intc";
+				reg = <0x0 0x9880 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+				status = "disabled";
+			};
+
+			reset: reset-controller@4404 {
+				compatible = "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x0 0x5400 0x0 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x84c0 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x84dc 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x0 0x8680 0x0 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x8700 0x0 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			clock-measure@8758 {
+				compatible = "amlogic,meson-gx-clk-measure";
+				reg = <0x0 0x8758 0x0 0x10>;
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc: spi@8d80 {
+				compatible = "amlogic,meson-gx-spicc";
+				reg = <0x0 0x08d80 0x0 0x80>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				reg = <0x0 0x08c80 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		sram: sram@c8000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-sram@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-sram@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
+		aobus: bus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
+				reg =  <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-gx-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+				};
+			};
+
+			cec_AO: cec@100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x004c0 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4e0 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x004e0 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x500 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@550 {
+				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
+				reg = <0x0 0x00550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		vdec: video-codec@c8820000 {
+			compatible = "amlogic,gx-vdec";
+			reg = <0x0 0xc8820000 0x0 0x10000>,
+			      <0x0 0xc110a580 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&sysctrl_AO>;
+			amlogic,canvas = <&canvas>;
+		};
+
+		periphs: bus@c8834000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8834000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+			hwrng: rng {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x0 0x0 0x4>;
+			};
+		};
+
+		dmcbus: bus@c8838000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8838000 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,canvas";
+				reg = <0x0 0x48 0x0 0x14>;
+			};
+		};
+
+		hiubus: bus@c883c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc883c000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+			sysctrl: system-controller@0 {
+				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
+				reg = <0 0 0 0x400>;
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-gxbb-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+				};
+			};
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson-gxbb-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000>,
+			      <0x0 0xc8834540 0x0 0x4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
+			status = "disabled";
+		};
+
+		apb: apb@d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+
+			sd_emmc_a: mmc@70000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x70000 0x0 0x800>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sd_emmc_b: mmc@72000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x72000 0x0 0x800>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sd_emmc_c: mmc@74000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x74000 0x0 0x800>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		vpu: vpu@d0100000 {
+			compatible = "amlogic,meson-gx-vpu";
+			reg = <0x0 0xd0100000 0x0 0x100000>,
+			      <0x0 0xc883c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port@1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
+		};
+
+		hdmi_tx: hdmi-tx@c883a000 {
+			compatible = "amlogic,meson-gx-dw-hdmi";
+			reg = <0x0 0xc883a000 0x0 0x1c>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "HDMITX";
+			status = "disabled";
+
+			/* VPU VENC Input */
+			hdmi_tx_venc_port: port@0 {
+				reg = <0>;
+
+				hdmi_tx_in: endpoint {
+					remote-endpoint = <&hdmi_tx_out>;
+				};
+			};
+
+			/* TMDS Output */
+			hdmi_tx_tmds_port: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-nanopi-k2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxbb-nanopi-k2-u-boot.dtsi
new file mode 100644
index 000000000..c35158d7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-nanopi-k2-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-nanopi-k2.dts b/roms/u-boot/arch/arm/dts/meson-gxbb-nanopi-k2.dts
new file mode 100644
index 000000000..7be3e3540
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-nanopi-k2.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+	model = "FriendlyARM NanoPi K2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-stat {
+			label = "nanopi-k2:blue:stat";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_tf: regulator-vddio-tf {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_TF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+		         <1800000 1>;
+
+		regulator-settling-time-up-us = <100>;
+		regulator-settling-time-down-us = <5000>;
+	};
+
+	wifi_32k: wifi-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi_32k>;
+		clock-names = "ext_clock";
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	/* CVBS is available on CON1 pin 36, disabled by default */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
+			  "VCCK En", "CON1 Header Pin31",
+			  "I2S Header Pin6", "IR In", "I2S Header Pin7",
+			  "I2S Header Pin3", "I2S Header Pin4",
+			  "I2S Header Pin5", "HDMI CEC", "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+			  "Eth PHY nRESET", "Eth PHY Intc",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
+			  "CON1 Header Pin33",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+			  "eMMC Reset", "eMMC CMD",
+			  "", "", "", "", "eMMC DS",
+			  "", "",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "VDDEE Regulator", "VCCK Regulator",
+			  /* Bank GPIOY */
+			  "CON1 Header Pin7", "CON1 Header Pin11",
+			  "CON1 Header Pin13", "CON1 Header Pin15",
+			  "CON1 Header Pin18", "CON1 Header Pin19",
+			  "CON1 Header Pin22", "CON1 Header Pin21",
+			  "CON1 Header Pin24", "CON1 Header Pin23",
+			  "CON1 Header Pin26", "CON1 Header Pin29",
+			  "CON1 Header Pin32", "CON1 Header Pin8",
+			  "CON1 Header Pin10", "CON1 Header Pin16",
+			  "CON1 Header Pin12",
+			  /* Bank GPIOX */
+			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+			  "WIFI Power Enable", "WIFI WAKE HOST",
+			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+			  "Bluetooth UART TX", "Bluetooth UART RX",
+			  "Bluetooth UART CTS", "Bluetooth UART RTS",
+			  "", "", "", "WIFI 32K", "Bluetooth Enable",
+			  "Bluetooth WAKE HOST", "",
+			  /* Bank GPIOCLK */
+			  "", "CON1 Header Pin35", "", "";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_ao18>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_tf>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "disabled";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+/* DBG_UART */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* Bluetooth on AP6212 */
+&uart_A {
+	status = "disabled";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+};
+
+/* 40-pin CON1 */
+&uart_C {
+	status = "disabled";
+	pinctrl-0 = <&uart_c_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vdd_5v>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi
new file mode 100644
index 000000000..5a2be8171
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-u-boot.dtsi"
+
+/ {
+	smbios {
+		compatible = "u-boot,sysinfo-smbios";
+
+		smbios {
+			system {
+				manufacturer = "Hardkernel Co., Ltd.";
+				product = "ODROID-C2";
+			};
+
+			baseboard {
+				manufacturer = "Hardkernel Co., Ltd.";
+				product = "ODROID-C2";
+			};
+
+			chassis {
+				manufacturer = "Hardkernel Co., Ltd.";
+				product = "ODROID-C2";
+			};
+		};
+	};
+};
+
+&ethmac {
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+};
+
+&usb0 {
+	status = "disabled";
+};
+
+&usb1 {
+	hnp-srp-disable;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-odroidc2.dts b/roms/u-boot/arch/arm/dts/meson-gxbb-odroidc2.dts
new file mode 100644
index 000000000..70fcfb7b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-odroidc2.dts
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
+	model = "Hardkernel ODROID-C2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	usb_otg_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_OTG_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/*
+		 * signal name from schematics: PWREN
+		 */
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * signal name from schematics: USB_POWER
+		 */
+		vin-supply = <&p5v0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "c2:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	hdmi_p5v0: regulator-hdmi_p5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		/* AP2331SA-7 */
+		vin-supply = <&p5v0>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* U16 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+		/* U12/U13 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U18 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U17 RT9179GB */
+		vin-supply = <&p5v0>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		/* U11 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	ddr3_1v5: regulator-ddr3_1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		/* U15 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&gpio_ao {
+	/*
+	 * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_p5v0>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
+			  "USB HUB nRESET", "USB OTG Power En",
+			  "J7 Header Pin2", "IR In", "J7 Header Pin4",
+			  "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
+			  "HDMI CEC", "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+			  "Eth PHY nRESET", "Eth PHY Intc",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+			  "eMMC Reset", "eMMC CMD",
+			  "", "", "", "", "", "", "",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "PWM D", "PWM B",
+			  /* Bank GPIOY */
+			  "Revision Bit0", "Revision Bit1", "",
+			  "J2 Header Pin35", "", "", "", "J2 Header Pin36",
+			  "J2 Header Pin31", "", "", "", "TF VDD En",
+			  "J2 Header Pin32", "J2 Header Pin26", "", "",
+			  /* Bank GPIOX */
+			  "J2 Header Pin29", "J2 Header Pin24",
+			  "J2 Header Pin23", "J2 Header Pin22",
+			  "J2 Header Pin21", "J2 Header Pin18",
+			  "J2 Header Pin33", "J2 Header Pin19",
+			  "J2 Header Pin16", "J2 Header Pin15",
+			  "J2 Header Pin12", "J2 Header Pin13",
+			  "J2 Header Pin8", "J2 Header Pin10",
+			  "", "", "", "", "",
+			  "J2 Header Pin11", "", "J2 Header Pin7", "",
+			  /* Bank GPIOCLK */
+			  "", "", "", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc1v8>;
+};
+
+&scpi_clocks {
+	status = "disabled";
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "disabled";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb0 {
+	status = "disabled";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-p200-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxbb-p200-u-boot.dtsi
new file mode 100644
index 000000000..c35158d7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-p200-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-p200.dts b/roms/u-boot/arch/arm/dts/meson-gxbb-p200.dts
new file mode 100644
index 000000000..3c93d1898
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-p200.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "amlogic,p200", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P200 Development Board";
+
+	avdd18_usb_adc: regulator-avdd18_usb_adc {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD18_USB_ADC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@3 {
+			/* Micrel KSZ9031 (0x00221620) */
+			reg = <3>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&avdd18_usb_adc>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-p201-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxbb-p201-u-boot.dtsi
new file mode 100644
index 000000000..c35158d7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-p201-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-p201.dts b/roms/u-boot/arch/arm/dts/meson-gxbb-p201.dts
new file mode 100644
index 000000000..150a82f3b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-p201.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "amlogic,p201", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P201 Development Board";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0>, <10000>, <1000000>;
+	snps,reset-active-low;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb-p20x.dtsi b/roms/u-boot/arch/arm/dts/meson-gxbb-p20x.dtsi
new file mode 100644
index 000000000..e803a466f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb-p20x.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/* signal name in schematic: USB_PWR_EN */
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+
+		regulator-settling-time-up-us = <10000>;
+		regulator-settling-time-down-us = <150000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs_connector: cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxbb.dtsi b/roms/u-boot/arch/arm/dts/meson-gxbb.dtsi
new file mode 100644
index 000000000..7c029f552
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxbb.dtsi
@@ -0,0 +1,856 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
+#include <dt-bindings/gpio/meson-gxbb-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
+/ {
+	compatible = "amlogic,meson-gxbb";
+
+	soc {
+		usb0_phy: phy@c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb1_phy: phy@c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+	};
+};
+
+&aiu {
+	compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 14>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+				bias-disable;
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a_3";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_6_pins: pwm_ao_a_6 {
+			mux {
+				groups = "pwm_ao_a_6";
+				function = "pwm_ao_a_6";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_12_pins: pwm_ao_a_12 {
+			mux {
+				groups = "pwm_ao_a_12";
+				function = "pwm_ao_a_12";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		i2s_am_clk_pins: i2s_am_clk {
+			mux {
+				groups = "i2s_am_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s_out_ao_clk {
+			mux {
+				groups = "i2s_out_ao_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s_out_lr_clk {
+			mux {
+				groups = "i2s_out_lr_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+			mux {
+				groups = "i2s_out_ch23_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+			mux {
+				groups = "i2s_out_ch45_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_6_pins: spdif_out_ao_6 {
+			mux {
+				groups = "spdif_out_ao_6";
+				function = "spdif_out_ao";
+			};
+		};
+
+		spdif_out_ao_13_pins: spdif_out_ao_13 {
+			mux {
+				groups = "spdif_out_ao_13";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&cbus {
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
+	};
+};
+
+&cec_AO {
+	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+	clock-names = "core";
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "mpeg-clk";
+};
+
+&efuse {
+	clocks = <&clkc CLKID_EFUSE>;
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-gpio-intc",
+		     "amlogic,meson-gxbb-gpio-intc";
+	status = "okay";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&sysctrl {
+	clkc: clock-controller {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		clocks = <&xtal>;
+		clock-names = "xtal";
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&mali {
+	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_periphs 0 0 119>;
+		};
+
+		emmc_pins: emmc {
+			mux-0 {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd";
+				function = "emmc";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "emmc_clk";
+				function = "emmc";
+				bias-disable;
+			};
+		};
+
+		emmc_ds_pins: emmc-ds {
+			mux {
+				groups = "emmc_ds";
+				function = "emmc";
+				bias-pull-down;
+			};
+		};
+
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		spi_pins: spi-pins {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux-0 {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd";
+				function = "sdcard";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdcard_clk";
+				function = "sdcard";
+				bias-disable;
+			};
+		};
+
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_pins: sdio {
+			mux-0 {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd";
+				function = "sdio";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdio_clk";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				       "i2c_sda_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				       "i2c_sda_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				       "i2c_sda_c";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		pwm_a_x_pins: pwm_a_x {
+			mux {
+				groups = "pwm_a_x";
+				function = "pwm_a_x";
+				bias-disable;
+			};
+		};
+
+		pwm_a_y_pins: pwm_a_y {
+			mux {
+				groups = "pwm_a_y";
+				function = "pwm_a_y";
+				bias-disable;
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f_x";
+				bias-disable;
+			};
+		};
+
+		pwm_f_y_pins: pwm_f_y {
+			mux {
+				groups = "pwm_f_y";
+				function = "pwm_f_y";
+				bias-disable;
+			};
+		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+				bias-disable;
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch23_y_pins: i2sout_ch23_y {
+			mux {
+				groups = "i2sout_ch23_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch45_y_pins: i2sout_ch45_y {
+			mux {
+				groups = "i2sout_ch45_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch67_y_pins: i2sout_ch67_y {
+			mux {
+				groups = "i2sout_ch67_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		spdif_out_y_pins: spdif_out_y {
+			mux {
+				groups = "spdif_out_y";
+				function = "spdif_out";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&pwrc {
+	resets = <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_VCBUS>,
+		 <&reset RESET_BT656>,
+		 <&reset RESET_DVIN_RESET>,
+		 <&reset RESET_RDMA>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC>,
+		 <&reset RESET_VDI6>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
+	clocks = <&clkc CLKID_VPU>,
+	         <&clkc CLKID_VAPB>;
+	clock-names = "vpu", "vapb";
+	/*
+	 * VPU clocking is provided by two identical clock paths
+	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+	 * free mux to safely change frequency while running.
+	 * Same for VAPB but with a final gate after the glitch free mux.
+	 */
+	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+			  <&clkc CLKID_VPU_0>,
+			  <&clkc CLKID_VPU>, /* Glitch free mux */
+			  <&clkc CLKID_VAPB_0_SEL>,
+			  <&clkc CLKID_VAPB_0>,
+			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VPU_0>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VAPB_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>, /* Do Nothing */
+			       <0>, /* Do Nothing */
+			       <250000000>,
+			       <0>; /* Do Nothing */
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "adc_clk", "adc_sel";
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_A>;
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_B>;
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_C>;
+};
+
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
+&spicc {
+	clocks = <&clkc CLKID_SPICC>;
+	clock-names = "core";
+	resets = <&reset RESET_PERIPHS_SPICC>;
+	num-cs = <1>;
+};
+
+&spifc {
+	clocks = <&clkc CLKID_SPI>;
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
+	clocks = <&clkc CLKID_DOS_PARSER>,
+		 <&clkc CLKID_DOS>,
+		 <&clkc CLKID_VDEC_1>,
+		 <&clkc CLKID_VDEC_HEVC>;
+	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+	resets = <&reset RESET_PARSER>;
+	reset-names = "esparser";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-mali.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-mali.dtsi
new file mode 100644
index 000000000..478e755cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-mali.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-mali450.dtsi"
+
+&mali {
+	compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s805x-libretech-ac-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s805x-libretech-ac-u-boot.dtsi
new file mode 100644
index 000000000..39270ea71
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s805x-libretech-ac-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts b/roms/u-boot/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
new file mode 100644
index 000000000..9e43f4dca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S805X-AC";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		/*
+		 * The pads are present but no connector is soldered on
+		 * 2J2, so keep this off by default.
+		 */
+		status = "disabled";
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	dc_5v: regulator-dc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_5v>;
+
+		/*
+		 * This is controlled by GPIOAO_9 we reserve this but
+		 * claiming it as done below reset the board anyway
+		 * Need to investigate this
+		 *
+		 * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXL-LIBRETECH-S805X-AC";
+		audio-widgets = "Speaker", "9J5-3 LEFT",
+				"Speaker", "9J5-2 RIGHT";
+		audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
+				"9J5-2 RIGHT", "ACODEC LORN";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "7J1 Header Pin31",
+			  "", "", "", "",
+			  "IR In",
+			  "HDMI CEC",
+			  "5V VCCK Regulator",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Eth Link LED", "Eth Activity LED",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "", "7J1 Header Pin13",
+			  "7J1 Header Pin15",
+			  "7J1 Header Pin7",
+			  "7J1 Header Pin12",
+			  "7J1 Header Pin16",
+			  "7J1 Header Pin18",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
+			  "", "SPI NOR Chip Select",
+			  /* Bank CARD */
+			  "", "", "", "", "", "", "",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "7J1 Header Pin27", "7J1 Header Pin28", "",
+			  "7J1 Header Pin29",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "7J1 Header Pin22", "7J1 Header Pin26",
+			  "7J1 Header Pin36", "7J1 Header Pin38",
+			  "7J1 Header Pin40", "7J1 Header Pin37",
+			  "7J1 Header Pin33", "7J1 Header Pin35",
+			  "7J1 Header Pin19", "7J1 Header Pin21",
+			  "7J1 Header Pin24", "7J1 Header Pin23",
+			  "7J1 Header Pin8", "7J1 Header Pin10",
+			  "", "", "7J1 Header Pin32", "", "",
+			  /* Bank GPIOCLK */
+			  "", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s805x.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s805x.dtsi
new file mode 100644
index 000000000..299758498
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s805x.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,s805x", "amlogic,meson-gxl";
+};
+
+/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&gpu_opp_table {
+	opp-744000000 {
+		status = "disabled";
+	};
+};
+
+&mali {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
new file mode 100644
index 000000000..39270ea71
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905d-libretech-pc-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts b/roms/u-boot/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts
new file mode 100644
index 000000000..100a1cfee
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905D-PC";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905d.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s905d.dtsi
new file mode 100644
index 000000000..433219195
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905d.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
+
+/ {
+	compatible = "amlogic,s905d", "amlogic,meson-gxl";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-khadas-vim-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-khadas-vim-u-boot.dtsi
new file mode 100644
index 000000000..39270ea71
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-khadas-vim-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
new file mode 100644
index 000000000..8bcdffdf5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+	compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Khadas VIM";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	aliases {
+		serial2 = &uart_AO_B;
+		ethernet0 = &ethmac;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		power {
+			label = "vim:red:power";
+			pwms = <&pwm_AO_ab 1 7812500 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		/* has to be enabled manually when a battery is connected: */
+		status = "disabled";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-khadas";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "Power Key In",
+			  "J9 Header Pin35",
+			  "J9 Header Pin16",
+			  "J9 Header Pin15",
+			  "J9 Header Pin33",
+			  "IR In",
+			  "HDMI CEC",
+			  "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Power OFF",
+			  "VCCK Enable",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "HDMI_5V_EN", "SPDIF",
+			  "J9 Header Pin37",
+			  "J9 Header Pin30",
+			  "J9 Header Pin29",
+			  "J9 Header Pin32",
+			  "J9 Header Pin31",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "", "BOOT_MODE", "", "", "eMMC Data Strobe",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+			  "WIFI Power Enable", "WIFI WAKE HOST",
+			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+			  "Bluetooth UART TX", "Bluetooth UART RX",
+			  "Bluetooth UART CTS", "Bluetooth UART RTS",
+			  "WIFI 32K", "Bluetooth Enable",
+			  "Bluetooth WAKE HOST",
+			  /* Bank GPIOCLK */
+			  "", "J9 Header Pin39";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal> , <&xtal>;
+	clock-names = "clkin0", "clkin1" ;
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
+&uart_AO {
+	status = "okay";
+};
+
+/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	dr_mode = "peripheral";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-u-boot.dtsi
new file mode 100644
index 000000000..39270ea71
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi
new file mode 100644
index 000000000..8ff5a0ef2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
new file mode 100644
index 000000000..675eaa879
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905X-CC V2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+
+	vcck: regulator-vcck {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXL-LIBRETECH-S905X-CC-V2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	hdmi-supply = <&vcc5v>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+
+	status = "okay";
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	nor_4u1: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	pinctrl-names = "default";
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
new file mode 100644
index 000000000..5ae7bb620
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905x-cc", "amlogic,s905x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905X-CC";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-system {
+			label = "librecomputer:system-status";
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		led-blue {
+			label = "librecomputer:blue";
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_card: regulator-vcc-card {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* This is provided by LDOs on the eMMC daugther card */
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXL-LIBRETECH-S905X-CC";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "Blue LED",
+			  "SDCard Voltage Switch",
+			  "7J1 Header Pin5",
+			  "7J1 Header Pin3",
+			  "7J1 Header Pin12",
+			  "IR In",
+			  "9J3 Switch HDMI CEC/7J1 Header Pin11",
+			  "7J1 Header Pin13",
+			  /* GPIO_TEST_N */
+			  "7J1 Header Pin15";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Eth Link LED", "Eth Activity LED",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "HDMI_5V_EN", "9J1 Header Pin2",
+			  "Analog Audio Mute",
+			  "2J3 Header Pin6",
+			  "2J3 Header Pin5",
+			  "2J3 Header Pin4",
+			  "2J3 Header Pin3",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "ALT BOOT MODE", "", "", "", "eMMC Data Strobe",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "Green LED", "VCCK Enable",
+			  "7J1 Header Pin27", "7J1 Header Pin28",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "7J1 Header Pin22", "7J1 Header Pin26",
+			  "7J1 Header Pin36", "7J1 Header Pin38",
+			  "7J1 Header Pin40", "7J1 Header Pin37",
+			  "7J1 Header Pin33", "7J1 Header Pin35",
+			  "7J1 Header Pin19", "7J1 Header Pin21",
+			  "7J1 Header Pin24", "7J1 Header Pin23",
+			  "7J1 Header Pin8", "7J1 Header Pin10",
+			  "7J1 Header Pin16", "7J1 Header Pin18",
+			  "7J1 Header Pin32", "7J1 Header Pin29",
+			  "7J1 Header Pin31",
+			  /* Bank GPIOCLK */
+			  "7J1 Header Pin7", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/*
+	 * even though the schematics don't show it:
+	 * HDMI_5V is also used as supply for the USB VBUS.
+	 */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212-u-boot.dtsi
new file mode 100644
index 000000000..39270ea71
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212.dts b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212.dts
new file mode 100644
index 000000000..2602940c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+	compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905X) P212 Development Board";
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 000000000..05cb2f5e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ *   Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/*
+	 * HDMI_5V is also used as supply for the USB VBUS.
+	 */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-s905x.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-s905x.dtsi
new file mode 100644
index 000000000..40c19f69e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-s905x.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
+
+/ {
+	compatible = "amlogic,s905x", "amlogic,meson-gxl";
+};
+
+/* S905X only has access to its internal PHY */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl-u-boot.dtsi
new file mode 100644
index 000000000..c35158d7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxl.dtsi b/roms/u-boot/arch/arm/dts/meson-gxl.dtsi
new file mode 100644
index 000000000..c3ac531c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxl.dtsi
@@ -0,0 +1,925 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+/ {
+	compatible = "amlogic,meson-gxl";
+
+	soc {
+		usb: usb@d0078080 {
+			compatible = "amlogic,meson-gxl-usb-ctrl";
+			reg = <0x0 0xd0078080 0x0 0x20>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "usb_ctrl", "ddr";
+			resets = <&reset RESET_USB_OTG>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>;
+			phy-names = "usb2-phy0", "usb2-phy1";
+
+			dwc2: usb@c9100000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xc9100000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@c9000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xc9000000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		acodec: audio-controller@c8832000 {
+			compatible = "amlogic,t9015";
+			reg = <0x0 0xc8832000 0x0 0x14>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "ACODEC";
+			clocks = <&clkc CLKID_ACODEC>;
+			clock-names = "pclk";
+			resets = <&reset RESET_ACODEC>;
+			status = "disabled";
+		};
+
+		crypto: crypto@c883e000 {
+			compatible = "amlogic,gxl-crypto";
+			reg = <0x0 0xc883e000 0x0 0x36>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc CLKID_BLKMV>;
+			clock-names = "blkmv";
+			status = "okay";
+		};
+	};
+};
+
+&aiu {
+	compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&apb {
+	usb2_phy0: phy@78000 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78000 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+
+	usb2_phy1: phy@78020 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78020 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+};
+
+&efuse {
+	clocks = <&clkc CLKID_EFUSE>;
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+	};
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxl-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 14>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_0_1_pins: uart_ao_b_0_1 {
+			mux {
+				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+				bias-disable;
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_8_pins: pwm_ao_a_8 {
+			mux {
+				groups = "pwm_ao_a_8";
+				function = "pwm_ao_a";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_6_pins: pwm_ao_b_6 {
+			mux {
+				groups = "pwm_ao_b_6";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+			mux {
+				groups = "i2s_out_ch23_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+			mux {
+				groups = "i2s_out_ch45_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_6_pins: spdif_out_ao_6 {
+			mux {
+				groups = "spdif_out_ao_6";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_9_pins: spdif_out_ao_9 {
+			mux {
+				groups = "spdif_out_ao_9";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+	clock-names = "core";
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "mpeg-clk";
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-gpio-intc",
+		     "amlogic,meson-gxl-gpio-intc";
+	status = "okay";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&sysctrl {
+	clkc: clock-controller {
+		compatible = "amlogic,gxl-clkc";
+		#clock-cells = <1>;
+		clocks = <&xtal>;
+		clock-names = "xtal";
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxl-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_periphs 0 0 100>;
+		};
+
+		emmc_pins: emmc {
+			mux-0 {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd";
+				function = "emmc";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "emmc_clk";
+				function = "emmc";
+				bias-disable;
+			};
+		};
+
+		emmc_ds_pins: emmc-ds {
+			mux {
+				groups = "emmc_ds";
+				function = "emmc";
+				bias-pull-down;
+			};
+		};
+
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		spi_pins: spi-pins {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux-0 {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd";
+				function = "sdcard";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdcard_clk";
+				function = "sdcard";
+				bias-disable;
+			};
+		};
+
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_pins: sdio {
+			mux-0 {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd";
+				function = "sdio";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdio_clk";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				     "i2c_sda_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				      "i2c_sda_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				      "i2c_sda_c";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		i2c_c_dv18_pins: i2c_c_dv18 {
+			mux {
+				groups = "i2c_sck_c_dv19",
+				      "i2c_sda_c_dv18";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		eth_pins: eth_c {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		eth_link_led_pins: eth_link_led {
+			mux {
+				groups = "eth_link_led";
+				function = "eth_led";
+				bias-disable;
+			};
+		};
+
+		eth_act_led_pins: eth_act_led {
+			mux {
+				groups = "eth_act_led";
+				function = "eth_led";
+			};
+		};
+		
+		pwm_a_pins: pwm_a {
+			mux {
+				groups = "pwm_a";
+				function = "pwm_a";
+				bias-disable;
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+				bias-disable;
+			};
+		};
+
+		pwm_c_pins: pwm_c {
+			mux {
+				groups = "pwm_c";
+				function = "pwm_c";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		pwm_f_clk_pins: pwm_f_clk {
+			mux {
+				groups = "pwm_f_clk";
+				function = "pwm_f";
+				bias-disable;
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f";
+				bias-disable;
+			};
+		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+				bias-disable;
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+				bias-disable;
+			};
+		};
+
+		i2s_am_clk_pins: i2s_am_clk {
+			mux {
+				groups = "i2s_am_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s_out_ao_clk {
+			mux {
+				groups = "i2s_out_ao_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s_out_lr_clk {
+			mux {
+				groups = "i2s_out_lr_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_pins: i2s_out_ch01 {
+			mux {
+				groups = "i2s_out_ch01";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+		i2sout_ch23_z_pins: i2sout_ch23_z {
+			mux {
+				groups = "i2sout_ch23_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch45_z_pins: i2sout_ch45_z {
+			mux {
+				groups = "i2sout_ch45_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch67_z_pins: i2sout_ch67_z {
+			mux {
+				groups = "i2sout_ch67_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		spdif_out_h_pins: spdif_out_ao_h {
+			mux {
+				groups = "spdif_out_h";
+				function = "spdif_out";
+				bias-disable;
+			};
+		};
+	};
+
+	eth-phy-mux {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x55c 0x0 0x4>;
+		mux-mask = <0xffffffff>;
+		mdio-parent-bus = <&mdio0>;
+
+		internal_mdio: mdio@e40908ff {
+			reg = <0xe40908ff>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			internal_phy: ethernet-phy@8 {
+				compatible = "ethernet-phy-id0181.4400";
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <8>;
+				max-speed = <100>;
+			};
+		};
+
+		external_mdio: mdio@2009087f {
+			reg = <0x2009087f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pwrc {
+	resets = <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_VCBUS>,
+		 <&reset RESET_BT656>,
+		 <&reset RESET_DVIN_RESET>,
+		 <&reset RESET_RDMA>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC>,
+		 <&reset RESET_VDI6>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
+	clocks = <&clkc CLKID_VPU>,
+	         <&clkc CLKID_VAPB>;
+	clock-names = "vpu", "vapb";
+	/*
+	 * VPU clocking is provided by two identical clock paths
+	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+	 * free mux to safely change frequency while running.
+	 * Same for VAPB but with a final gate after the glitch free mux.
+	 */
+	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+			  <&clkc CLKID_VPU_0>,
+			  <&clkc CLKID_VPU>, /* Glitch free mux */
+			  <&clkc CLKID_VAPB_0_SEL>,
+			  <&clkc CLKID_VAPB_0>,
+			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VPU_0>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VAPB_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>, /* Do Nothing */
+			       <0>, /* Do Nothing */
+			       <250000000>,
+			       <0>; /* Do Nothing */
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "adc_clk", "adc_sel";
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_A>;
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_B>;
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_C>;
+};
+
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
+&spicc {
+	clocks = <&clkc CLKID_SPICC>;
+	clock-names = "core";
+	resets = <&reset RESET_PERIPHS_SPICC>;
+	num-cs = <1>;
+};
+
+&spifc {
+	clocks = <&clkc CLKID_SPI>;
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
+	clocks = <&clkc CLKID_DOS_PARSER>,
+		 <&clkc CLKID_DOS>,
+		 <&clkc CLKID_VDEC_1>,
+		 <&clkc CLKID_VDEC_HEVC>;
+	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+	resets = <&reset RESET_PARSER>;
+	reset-names = "esparser";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxm-khadas-vim2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxm-khadas-vim2-u-boot.dtsi
new file mode 100644
index 000000000..c1763336c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxm-khadas-vim2-u-boot.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
+
+/ {
+	aliases {
+		spi0 = &spifc;
+	};
+};
+
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+};
+
+&spifc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxm-khadas-vim2.dts b/roms/u-boot/arch/arm/dts/meson-gxm-khadas-vim2.dts
new file mode 100644
index 000000000..bff8ec2c1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxm-khadas-vim2.dts
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxm.dtsi"
+
+/ {
+	compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Khadas VIM2";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial2 = &uart_AO_B;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
+			 &gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
+		/* Dummy RPM values since fan is optional */
+		gpio-fan,speed-map = <0 0
+				      1 1
+				      2 2
+				      3 3>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		power {
+			label = "vim:red:power";
+			pwms = <&pwm_AO_ab 1 7812500 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+	};
+
+	map1 {
+		cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+				 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		/* has to be enabled manually when a battery is connected: */
+		status = "disabled";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-khadas";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	max-frequency = <60000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/*
+ * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe
+ * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q16", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+/* This one is connected to the Bluetooth module */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
new file mode 100644
index 000000000..39270ea71
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxm-s912-libretech-pc-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxm-s912-libretech-pc.dts b/roms/u-boot/arch/arm/dts/meson-gxm-s912-libretech-pc.dts
new file mode 100644
index 000000000..444c24986
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxm-s912-libretech-pc.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s912-pc", "amlogic,s912",
+		     "amlogic,meson-gxm";
+	model = "Libre Computer AML-S912-PC";
+
+	typec2_vbus: regulator-typec2_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "TYPEC2_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v>;
+
+		gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the irq pin of the TYPE C controller is not driven
+	 * by the SoC.
+	 */
+	fusb302_irq_pins: fusb302_irq {
+		mux {
+			groups = "GPIODV_0";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&i2c_C {
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		pinctrl-0 = <&fusb302_irq_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+		vbus-supply = <&typec2_vbus>;
+
+		status = "okay";
+	};
+};
+
+&usb2_phy2 {
+	phy-supply = <&typec2_vbus>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi
new file mode 100644
index 000000000..39270ea71
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-gxm-wetek-core2.dts b/roms/u-boot/arch/arm/dts/meson-gxm-wetek-core2.dts
new file mode 100644
index 000000000..ec794c134
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxm-wetek-core2.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "WeTek Core 2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-update {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Disabled as Realtek RTL8152 USB provides Ethernet */
+&ethmac {
+	status = "disabled";
+};
+
+&internal_phy {
+	status = "disabled";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-gxm.dtsi b/roms/u-boot/arch/arm/dts/meson-gxm.dtsi
new file mode 100644
index 000000000..fe4145112
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-gxm.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+
+/ {
+	compatible = "amlogic,meson-gxm";
+
+	cpus {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	usb2_phy2: phy@78040 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78040 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxm-mali", "arm,mali-t820";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&clkc CLKID_MALI>;
+		resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+
+	map1 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
+};
+
+&scpi_dvfs {
+	clock-indices = <0 1>;
+	clock-output-names = "vbig", "vlittle";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+};
+
+&usb {
+	compatible = "amlogic,meson-gxm-usb-ctrl";
+
+	phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2";
+	phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
+};
+
+&vdec {
+	compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-khadas-vim3-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-khadas-vim3-u-boot.dtsi
new file mode 100644
index 000000000..24dbf8ca2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-khadas-vim3-u-boot.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+	aliases {
+		spi0 = &spifc;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_4b_pins>, <&emmc_ds_pins>;
+	bus-width = <4>;
+};
+
+&spifc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-khadas-vim3.dtsi b/roms/u-boot/arch/arm/dts/meson-khadas-vim3.dtsi
new file mode 100644
index 000000000..7b46555ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-khadas-vim3.dtsi
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			label = "vim3:white:sys";
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-red {
+			label = "vim3:red";
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12B-KHADAS-VIM3";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+        pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+        pinctrl-names = "default";
+        status = "okay";
+        phy-mode = "rgmii";
+        phy-handle = <&external_phy>;
+        amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	khadas_mcu: system-controller@18 {
+		compatible = "khadas,mcu";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	gpio_expander: gpio-controller@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		vcc-supply = <&vcc_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-khadas";
+};
+
+&pcie {
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ef {
+        status = "okay";
+        pinctrl-0 = <&pwm_e_pins>;
+        pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q128: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-sm1-khadas-vim3l-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-sm1-khadas-vim3l-u-boot.dtsi
new file mode 100644
index 000000000..a591c0c9f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-sm1-khadas-vim3l-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-sm1-u-boot.dtsi"
+#include "meson-khadas-vim3-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-sm1-khadas-vim3l.dts b/roms/u-boot/arch/arm/dts/meson-sm1-khadas-vim3l.dts
new file mode 100644
index 000000000..4b517ca72
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-sm1-khadas-vim3l.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include "meson-khadas-vim3.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "khadas,vim3l", "amlogic,sm1";
+	model = "Khadas VIM3L";
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_a {
+	sd-uhs-sdr50;
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
+
diff --git a/roms/u-boot/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi
new file mode 100644
index 000000000..963bf96b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-sm1-u-boot.dtsi"
+
+&ethmac {
+	snps,reset-gpio = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+};
+
+/* SARADC is needed for proper board variant detection */
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+&tflash_vdd {
+	gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-sm1-odroid-c4.dts b/roms/u-boot/arch/arm/dts/meson-sm1-odroid-c4.dts
new file mode 100644
index 000000000..cf5a98f0e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-sm1-odroid-c4.dts
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "hardkernel,odroid-c4", "amlogic,sm1";
+	model = "Hardkernel ODROID-C4";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&main_12v>;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hub_5v: regulator-hub_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HUB_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the Hub CHIPENABLE, LOW sets low power state */
+		gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the microUSB port power enable */
+		gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-ODROID-C4";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOH */
+		"", "", "", "", "",
+		"PIN_36", /* GPIOH_5 */
+		"PIN_26", /* GPIOH_6 */
+		"PIN_32", /* GPIOH_7 */
+		"",
+		/* BOOT */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOC */
+		"", "", "", "", "", "", "", "",
+		/* GPIOA */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"PIN_27", /* GPIOA_14 */
+		"PIN_28", /* GPIOA_15 */
+		/* GPIOX */
+		"PIN_16", /* GPIOX_0 */
+		"PIN_18", /* GPIOX_1 */
+		"PIN_22", /* GPIOX_2 */
+		"PIN_11", /* GPIOX_3 */
+		"PIN_13", /* GPIOX_4 */
+		"PIN_7",  /* GPIOX_5 */
+		"PIN_33", /* GPIOX_6 */
+		"PIN_15", /* GPIOX_7 */
+		"PIN_19", /* GPIOX_8 */
+		"PIN_21", /* GPIOX_9 */
+		"PIN_24", /* GPIOX_10 */
+		"PIN_23", /* GPIOX_11 */
+		"PIN_8",  /* GPIOX_12 */
+		"PIN_10", /* GPIOX_13 */
+		"PIN_29", /* GPIOX_14 */
+		"PIN_31", /* GPIOX_15 */
+		"PIN_12", /* GPIOX_16 */
+		"PIN_3",  /* GPIOX_17 */
+		"PIN_5",  /* GPIOX_18 */
+		"PIN_35"; /* GPIOX_19 */
+
+	/*
+	 * WARNING: The USB Hub on the Odroid-C4 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"", "", "", "",
+		"PIN_47", /* GPIOAO_4 */
+		"", "",
+		"PIN_45", /* GPIOAO_7 */
+		"PIN_46", /* GPIOAO_8 */
+		"PIN_44", /* GPIOAO_9 */
+		"PIN_42", /* GPIOAO_10 */
+		"",
+		/* GPIOE */
+		"", "", "";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+	/* Enable the hub which is connected to this port */
+	phy-supply = <&hub_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-sm1-sei610-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-sm1-sei610-u-boot.dtsi
new file mode 100644
index 000000000..8ebc1caa4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-sm1-sei610-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-sm1-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/meson-sm1-sei610.dts b/roms/u-boot/arch/arm/dts/meson-sm1-sei610.dts
new file mode 100644
index 000000000..5ab139a34
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-sm1-sei610.dts
@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "seirobotics,sei610", "amlogic,sm1";
+	model = "SEI Robotics SEI610";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	mono_dac: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "U16";
+		sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+	};
+
+	dmics: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key1 {
+			label = "A";
+			linux,code = <BTN_0>;
+			gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key2 {
+			label = "B";
+			linux,code = <BTN_1>;
+			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key3 {
+			label = "C";
+			linux,code = <BTN_2>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		mic_mute {
+			label = "MicMute";
+			linux,code = <SW_MUTE_DEVICE>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		power_key {
+			label = "PowerKey";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bluetooth {
+			label = "sei610:blue:bt";
+			gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		power {
+			label = "sei610:red:power";
+			pwms = <&pwm_AO_ab 0 30518 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			active-low;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	/* Used by Tuner, RGB Led & IR Emitter LED array */
+	vddao_3v3_t: regulator-vddao_3v3_t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-low;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		/* TEE Reserved Memory */
+		bl32_reserved: bl32@5000000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-SEI610";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+				 <&tdmin_a>, <&tdmin_b>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* internal speaker interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&mono_dac>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* internal digital mics */
+		dai-link-8 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+/* Exposed via the on-board USB to Serial FT232RL IC */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/roms/u-boot/arch/arm/dts/meson-sm1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/meson-sm1-u-boot.dtsi
new file mode 100644
index 000000000..e05d4c369
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-sm1-u-boot.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common-u-boot.dtsi"
+
+&sd_emmc_a {
+	compatible = "amlogic,meson-sm1-mmc";
+};
+
+&sd_emmc_b {
+	compatible = "amlogic,meson-sm1-mmc";
+};
+
+&sd_emmc_c {
+	compatible = "amlogic,meson-sm1-mmc";
+};
+
diff --git a/roms/u-boot/arch/arm/dts/meson-sm1.dtsi b/roms/u-boot/arch/arm/dts/meson-sm1.dtsi
new file mode 100644
index 000000000..71317f5aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/meson-sm1.dtsi
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common.dtsi"
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/power/meson-sm1-power.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+/ {
+	compatible = "amlogic,sm1";
+
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <730000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <730000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <730000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <770000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <780000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <790000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <810000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <850000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <900000>;
+		};
+
+		opp-1908000000 {
+			opp-hz = /bits/ 64 <1908000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	audio: bus@60000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x60000 0x0 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>;
+
+		clkc_audio: clock-controller@0 {
+			status = "disabled";
+			compatible = "amlogic,sm1-audio-clkc";
+			reg = <0x0 0x0 0x0 0xb4>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clocks = <&clkc CLKID_AUDIO>,
+				 <&clkc CLKID_MPLL0>,
+				 <&clkc CLKID_MPLL1>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_MPLL3>,
+				 <&clkc CLKID_HIFI_PLL>,
+				 <&clkc CLKID_FCLK_DIV3>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <&clkc CLKID_FCLK_DIV5>;
+			clock-names = "pclk",
+				      "mst_in0",
+				      "mst_in1",
+				      "mst_in2",
+				      "mst_in3",
+				      "mst_in4",
+				      "mst_in5",
+				      "mst_in6",
+				      "mst_in7";
+
+			resets = <&reset RESET_AUDIO>;
+		};
+
+		toddr_a: audio-controller@100 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x100 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_A";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+			resets = <&arb AXG_ARB_TODDR_A>,
+				 <&clkc_audio AUD_RESET_TODDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <8192>;
+			status = "disabled";
+		};
+
+		toddr_b: audio-controller@140 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x140 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_B";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+			resets = <&arb AXG_ARB_TODDR_B>,
+				 <&clkc_audio AUD_RESET_TODDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		toddr_c: audio-controller@180 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x180 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_C";
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+			resets = <&arb AXG_ARB_TODDR_C>,
+				 <&clkc_audio AUD_RESET_TODDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_a: audio-controller@1c0 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x1c0 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_A";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+			resets = <&arb AXG_ARB_FRDDR_A>,
+				 <&clkc_audio AUD_RESET_FRDDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		frddr_b: audio-controller@200 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x200 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_B";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+			resets = <&arb AXG_ARB_FRDDR_B>,
+				 <&clkc_audio AUD_RESET_FRDDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_c: audio-controller@240 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x240 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_C";
+			interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+			resets = <&arb AXG_ARB_FRDDR_C>,
+				 <&clkc_audio AUD_RESET_FRDDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		arb: reset-controller@280 {
+			status = "disabled";
+			compatible = "amlogic,meson-sm1-audio-arb";
+			reg = <0x0 0x280 0x0 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+		};
+
+		tdmin_a: audio-controller@300 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x300 0x0 0x40>;
+			sound-name-prefix = "TDMIN_A";
+			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_b: audio-controller@340 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x340 0x0 0x40>;
+			sound-name-prefix = "TDMIN_B";
+			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_c: audio-controller@380 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x380 0x0 0x40>;
+			sound-name-prefix = "TDMIN_C";
+			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_lb: audio-controller@3c0 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x3c0 0x0 0x40>;
+			sound-name-prefix = "TDMIN_LB";
+			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_a: audio-controller@500 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x500 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_A";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_b: audio-controller@540 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x540 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_B";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_c: audio-controller@580 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x580 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_C";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tohdmitx: audio-controller@744 {
+			compatible = "amlogic,sm1-tohdmitx",
+				     "amlogic,g12a-tohdmitx";
+			reg = <0x0 0x744 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOHDMITX";
+			resets = <&clkc_audio AUD_RESET_TOHDMITX>;
+			status = "disabled";
+		};
+
+		toddr_d: audio-controller@840 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x840 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_D";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_D>;
+			resets = <&arb AXG_ARB_TODDR_D>,
+				 <&clkc_audio AUD_RESET_TODDR_D>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_d: audio-controller@880 {
+			 compatible = "amlogic,sm1-frddr",
+				      "amlogic,axg-frddr";
+			reg = <0x0 0x880 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_D";
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_D>;
+			resets = <&arb AXG_ARB_FRDDR_D>,
+				 <&clkc_audio AUD_RESET_FRDDR_D>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+	};
+
+	pdm: audio-controller@61000 {
+		compatible = "amlogic,sm1-pdm",
+			     "amlogic,axg-pdm";
+		reg = <0x0 0x61000 0x0 0x34>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "PDM";
+		clocks = <&clkc_audio AUD_CLKID_PDM>,
+			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
+		status = "disabled";
+	};
+};
+
+&cecb_AO {
+	compatible = "amlogic,meson-sm1-ao-cec";
+};
+
+&clk_msr {
+	compatible = "amlogic,meson-sm1-clk-measure";
+};
+
+
+&clkc {
+	compatible = "amlogic,sm1-clkc";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ethmac {
+	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-sm1-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+};
+
+&pcie {
+	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
+};
+
+&pwrc {
+	compatible = "amlogic,meson-sm1-pwrc";
+};
+
+&simplefb_cvbs {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&simplefb_hdmi {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,sm1-vdec";
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&usb {
+	power-domains = <&pwrc PWRC_SM1_USB_ID>;
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7622-bananapi-bpi-r64.dts b/roms/u-boot/arch/arm/dts/mt7622-bananapi-bpi-r64.dts
new file mode 100644
index 000000000..4f2f04851
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7622-bananapi-bpi-r64.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7622.dtsi"
+#include "mt7622-u-boot.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "mt7622-bpi-r64";
+	compatible = "mediatek,mt7622", "mediatek,mt7622-rfb";
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer0;
+	};
+
+	aliases {
+		spi0 = &snfi;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pcie1_pins: pcie1-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie1_pad_perst",
+				 "pcie1_0_waken",
+				 "pcie1_0_clkreq";
+		};
+	};
+
+	snfi_pins: snfi-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	snor_pins: snor-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	uart0_pins: uart0 {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	pwm_pins: pwm1 {
+		mux {
+			function = "pwm";
+			groups = "pwm_ch1_0" ;
+		};
+	};
+
+	watchdog_pins: watchdog-default {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "emmc";
+			groups =  "emmc";
+		};
+
+		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+		 */
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			bias-pull-down;
+		};
+
+	};
+
+	mmc1_pins_default: mmc1default {
+		mux {
+			function = "sd";
+			groups =  "sd_0";
+		};
+		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+		 *  DAT2, DAT3, CMD, CLK for SD respectively.
+		 */
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		conf-clk {
+			pins = "I2S3_OUT";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+		conf-cd {
+			pins = "TXD3";
+			bias-pull-up;
+		};
+
+	};
+};
+
+&snfi {
+	pinctrl-names = "default", "snfi";
+	pinctrl-0 = <&snor_pins>;
+	pinctrl-1 = <&snfi_pins>;
+	status = "okay";
+
+	spi-flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	r_smpl = <1>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	mediatek,gmac-id = <0>;
+	phy-mode = "sgmii";
+	mediatek,switch = "mt7531";
+	reset-gpios = <&gpio 54 GPIO_ACTIVE_HIGH>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gpio {
+	/*gpio 90 for setting mode to sata*/
+	asm_sel {
+		gpio-hog;
+		gpios = <90 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7622-rfb.dts b/roms/u-boot/arch/arm/dts/mt7622-rfb.dts
new file mode 100644
index 000000000..c2f1ad201
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7622-rfb.dts
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7622.dtsi"
+#include "mt7622-u-boot.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "mt7622-rfb";
+	compatible = "mediatek,mt7622", "mediatek,mt7622-rfb";
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer0;
+	};
+
+	aliases {
+		spi0 = &snor;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pcie1_pins: pcie1-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie1_pad_perst",
+				 "pcie1_0_waken",
+				 "pcie1_0_clkreq";
+		};
+	};
+
+	snfi_pins: snfi-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	snor_pins: snor-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	uart0_pins: uart0 {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	watchdog_pins: watchdog-default {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "emmc";
+			groups =  "emmc";
+		};
+
+		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+		 */
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			bias-pull-down;
+		};
+
+	};
+
+	mmc1_pins_default: mmc1default {
+		mux {
+			function = "sd";
+			groups =  "sd_0";
+		};
+		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+		 *  DAT2, DAT3, CMD, CLK for SD respectively.
+		 */
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		conf-clk {
+			pins = "I2S3_OUT";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+		conf-cd {
+			pins = "TXD3";
+			bias-pull-up;
+		};
+
+	};
+};
+
+&snfi {
+	pinctrl-names = "default", "snfi";
+	pinctrl-0 = <&snor_pins>;
+	pinctrl-1 = <&snfi_pins>;
+	status = "disabled";
+
+	spi-flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&snor {
+	pinctrl-names = "default";
+	pinctrl-0 = <&snor_pins>;
+	status = "okay";
+
+	spi-flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	r_smpl = <1>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	mediatek,gmac-id = <0>;
+	phy-mode = "sgmii";
+	mediatek,switch = "mt7531";
+	reset-gpios = <&gpio 54 GPIO_ACTIVE_HIGH>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&u3phy {
+       status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7622-u-boot.dtsi b/roms/u-boot/arch/arm/dts/mt7622-u-boot.dtsi
new file mode 100644
index 000000000..b14b1d434
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7622-u-boot.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+&topckgen {
+	u-boot,dm-pre-reloc;
+};
+
+&pericfg {
+	u-boot,dm-pre-reloc;
+};
+
+&apmixedsys {
+	u-boot,dm-pre-reloc;
+};
+
+&timer0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&snfi {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7622.dtsi b/roms/u-boot/arch/arm/dts/mt7622.dtsi
new file mode 100644
index 000000000..0127474c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7622.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/power/mt7629-power.h>
+#include <dt-bindings/reset/mt7629-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt7622";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	snfi: snfi@1100d000 {
+		compatible = "mediatek,mtk-snfi-spi";
+		reg = <0x1100d000 0x2000>;
+		clocks = <&pericfg CLK_PERI_NFI_PD>,
+			 <&pericfg CLK_PERI_SNFI_PD>;
+		clock-names = "nfi_clk", "pad_clk";
+		assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
+				  <&topckgen CLK_TOP_NFI_INFRA_SEL>;
+
+		assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
+					 <&topckgen CLK_TOP_UNIVPLL2_D8>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	snor: snor@11014000 {
+		compatible = "mediatek,mtk-snor";
+		reg = <0x11014000 0x1000>;
+		clocks = <&pericfg CLK_PERI_FLASH_PD>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	timer0: timer@10004000 {
+		compatible = "mediatek,timer";
+		reg = <0x10004000 0x80>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_APXGPT_PD>;
+		clock-names = "system-clk";
+	};
+
+	infracfg: infracfg@10000000 {
+		compatible = "mediatek,mt7622-infracfg",
+			     "syscon";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: pericfg@10002000 {
+		compatible = "mediatek,mt7622-pericfg", "syscon";
+		reg = <0x10002000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	scpsys: scpsys@10006000 {
+		compatible = "mediatek,mt7622-scpsys",
+			     "syscon";
+		#power-domain-cells = <1>;
+		reg = <0x10006000 0x1000>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_HIF_SEL>;
+		clock-names = "hif_sel";
+	};
+
+	sysirq: interrupt-controller@10200620 {
+		compatible = "mediatek,sysirq";
+		reg = <0x10200620 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	apmixedsys: apmixedsys@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys";
+		reg = <0x10209000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	topckgen: topckgen@10210000 {
+		compatible = "mediatek,mt7622-topckgen";
+		reg = <0x10210000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pinctrl: pinctrl@10211000 {
+		compatible = "mediatek,mt7622-pinctrl";
+		reg = <0x10211000 0x1000>;
+		gpio: gpio-controller {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	watchdog: watchdog@10212000 {
+		compatible = "mediatek,wdt";
+		reg = <0x10212000 0x800>;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&watchdog>;
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10310000 0x1000>,
+		      <0x10320000 0x1000>,
+		      <0x10340000 0x2000>,
+		      <0x10360000 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11002000 0x400>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART0_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+		assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt7622-mmc";
+		reg = <0x11230000 0x1000>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
+			 <&topckgen CLK_TOP_MSDC50_0_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt7622-mmc";
+		reg = <0x11240000 0x1000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
+			 <&topckgen CLK_TOP_AXI_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	ssusbsys: ssusbsys@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys",
+			     "syscon";
+		reg = <0x1a000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pciesys: pciesys@1a100800 {
+		compatible = "mediatek,mt7622-pciesys", "syscon";
+		reg = <0x1a100800 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie@1a140000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1a140000 0x1000>,
+		      <0x1a143000 0x1000>,
+		      <0x1a145000 0x1000>;
+		reg-names = "subsys", "port0", "port1";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+			 <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P0_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P0_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
+			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
+			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
+		power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		pcie0: pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	sata: sata@1a200000 {
+		compatible = "mediatek,mtk-ahci";
+		reg = <0x1a200000 0x1100>;
+		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+			<&pciesys MT7622_SATA_PHY_SW_RST>,
+			<&pciesys MT7622_SATA_PHY_REG_RST>;
+		reset-names = "axi", "sw", "reg";
+		mediatek,phy-mode = <&pciesys>;
+		ports-implemented = <0x1>;
+		phys = <&sata_port PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		status = "okay";
+	};
+
+	sata_phy: sata-phy@1a243000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0x1a243000 0x0100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "okay";
+
+		sata_port: sata-phy@1a243000 {
+			reg = <0x1a243000 0x0100>;
+			clocks = <&topckgen CLK_TOP_ETH_500M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ssusb: usb@1a0c0000 {
+		compatible = "mediatek,mt7622-xhci",
+			     "mediatek,mtk-xhci";
+		reg = <0x1a0c0000 0x01000>,
+		      <0x1a0c4700 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF1>;
+		clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+			 <&ssusbsys CLK_SSUSB_REF_EN>,
+			 <&ssusbsys CLK_SSUSB_MCU_EN>,
+			 <&ssusbsys CLK_SSUSB_DMA_EN>;
+		clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+		phys = <&u2port0 PHY_TYPE_USB2>,
+		       <&u3port0 PHY_TYPE_USB3>,
+		       <&u2port1 PHY_TYPE_USB2>;
+		status = "disabled";
+	};
+
+	u3phy: usb-phy@1a0c4000 {
+		compatible = "mediatek,mt7622-u3phy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0x1a0c4000 0x700>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a0c4800 {
+			reg = <0x1a0c4800 0x0100>;
+			#phy-cells = <1>;
+			clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+			clock-names = "ref";
+		};
+
+		u3port0: usb-phy@1a0c4900 {
+			reg = <0x1a0c4900 0x0700>;
+			#phy-cells = <1>;
+		};
+
+		u2port1: usb-phy@1a0c5000 {
+			reg = <0x1a0c5000 0x0100>;
+			#phy-cells = <1>;
+			clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
+			clock-names = "ref";
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7622-ethsys", "syscon";
+		reg = <0x1b000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7622-eth", "syscon";
+		reg = <0x1b100000 0x20000>;
+		clocks = <&topckgen CLK_TOP_ETH_SEL>,
+			 <&ethsys CLK_ETH_ESW_EN>,
+			 <&ethsys CLK_ETH_GP0_EN>,
+			 <&ethsys CLK_ETH_GP1_EN>,
+			 <&ethsys CLK_ETH_GP2_EN>,
+			 <&sgmiisys CLK_SGMII_TX250M_EN>,
+			 <&sgmiisys CLK_SGMII_RX250M_EN>,
+			 <&sgmiisys CLK_SGMII_CDR_REF>,
+			 <&sgmiisys CLK_SGMII_CDR_FB>,
+			 <&topckgen CLK_TOP_SGMIIPLL>,
+			 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+		clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+			      "sgmii_tx250m", "sgmii_rx250m",
+			      "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+			      "eth2pll";
+		power-domains = <&scpsys MT7629_POWER_DOMAIN_ETHSYS>;
+		resets = <&ethsys ETHSYS_FE_RST>;
+		reset-names = "fe";
+		mediatek,ethsys = <&ethsys>;
+		mediatek,sgmiisys = <&sgmiisys>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sgmiisys: sgmiisys@1b128000 {
+		compatible = "mediatek,mt7622-sgmiisys", "syscon";
+		reg = <0x1b128000 0x3000>;
+		#clock-cells = <1>;
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt7622-pwm";
+		reg = <0x11006000 0x1000>;
+		#clock-cells = <1>;
+		#pwm-cells = <2>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM_PD>,
+			 <&pericfg CLK_PERI_PWM1_PD>,
+			 <&pericfg CLK_PERI_PWM2_PD>,
+			 <&pericfg CLK_PERI_PWM3_PD>,
+			 <&pericfg CLK_PERI_PWM4_PD>,
+			 <&pericfg CLK_PERI_PWM5_PD>,
+			 <&pericfg CLK_PERI_PWM6_PD>;
+		clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
+			      "pwm5", "pwm6";
+		status = "disabled";
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7623-u-boot.dtsi b/roms/u-boot/arch/arm/dts/mt7623-u-boot.dtsi
new file mode 100644
index 000000000..832c16dca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7623-u-boot.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+&topckgen {
+	u-boot,dm-pre-reloc;
+};
+
+&topckgen {
+	u-boot,dm-pre-reloc;
+};
+
+&pericfg {
+	u-boot,dm-pre-reloc;
+};
+
+&timer0 {
+	u-boot,dm-pre-reloc;
+};
+
+&apmixedsys {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7623.dtsi b/roms/u-boot/arch/arm/dts/mt7623.dtsi
new file mode 100644
index 000000000..b5a802552
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7623.dtsi
@@ -0,0 +1,466 @@
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/clock/mt7623-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt7623-power.h>
+#include <dt-bindings/reset/mt7623-reset.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "mediatek,mt7623";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			clock-frequency = <1300000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			clock-frequency = <1300000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc32k: oscillator-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
+	};
+
+	clk26m: oscillator-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	topckgen: clock-controller@10000000 {
+		compatible = "mediatek,mt7623-topckgen";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt7623-infracfg", "syscon";
+		reg = <0x10001000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt7623-pericfg", "syscon";
+		reg = <0x10003000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pinctrl: pinctrl@10005000 {
+		compatible = "mediatek,mt7623-pinctrl";
+		reg = <0x10005000 0x1000>;
+
+		gpio: gpio-controller {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	scpsys: scpsys@10006000 {
+		compatible = "mediatek,mt7623-scpsys";
+		#power-domain-cells = <1>;
+		reg = <0x10006000 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,wdt";
+		reg = <0x10007000 0x100>;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&watchdog>;
+	};
+
+	timer0: timer@10008000 {
+		compatible = "mediatek,timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>;
+		clock-names = "system-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	apmixedsys: clock-controller@10209000 {
+		compatible = "mediatek,mt7623-apmixedsys";
+		reg = <0x10209000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x1000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11002000 0x400>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11003000 0x400>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11004000 0x400>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11005000 0x400>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt7623-mmc";
+		reg = <0x11230000 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0>,
+			 <&topckgen CLK_TOP_MSDC30_0_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt7623-mmc";
+		reg = <0x11240000 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1>,
+			 <&topckgen CLK_TOP_MSDC30_1_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys", "syscon";
+		reg = <0x1a000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0x1a140000 0x1000>, /* PCIe shared registers */
+		      <0x1a142000 0x1000>, /* Port0 registers */
+		      <0x1a143000 0x1000>, /* Port1 registers */
+		      <0x1a144000 0x1000>; /* Port2 registers */
+		reg-names = "subsys", "port0", "port1", "port2";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys HIFSYS_PCIE0_RST>,
+			 <&hifsys HIFSYS_PCIE1_RST>,
+			 <&hifsys HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_port PHY_TYPE_PCIE>,
+		       <&pcie1_port PHY_TYPE_PCIE>,
+		       <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT7623_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		status = "disabled";
+		ranges = <0x81000000 0 0x1a160000 0x1a160000 0 0x00010000
+			  0x83000000 0 0x60000000 0x60000000 0 0x10000000>;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+
+		pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+
+		pcie@2,0 {
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+	};
+
+	pcie0_phy: pcie-phy@1a149000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0x1a149000 0x0700>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		pcie0_port: pcie-phy@1a149900 {
+			reg = <0x1a149900 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	pcie1_phy: pcie-phy@1a14a000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0x1a14a000 0x0700>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		pcie1_port: pcie-phy@1a14a900 {
+			reg = <0x1a14a900 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb1: usb@1a1c0000 {
+		compatible = "mediatek,mt7623-xhci", "mediatek,mtk-xhci";
+		reg = <0x1a1c0000 0x1000>, <0x1a1c4700 0x0100>;
+		reg-names = "mac", "ippc";
+		power-domains = <&scpsys MT7623_POWER_DOMAIN_HIF>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>, <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: usb-phy@1a1c4000 {
+		compatible = "mediatek,mt7623-tphy", "mediatek,generic-tphy-v1";
+
+		reg = <0x1a1c4000 0x0700>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a1c4800 {
+			reg = <0x1a1c4800 0x0100>;
+			#phy-cells = <1>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+		};
+
+		u3port0: usb-phy@1a1c4900 {
+			reg = <0x1a1c4900 0x0700>;
+			#phy-cells = <1>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+		};
+	};
+
+	usb2: usb@1a240000 {
+		compatible = "mediatek,mt7623-xhci", "mediatek,mtk-xhci";
+		reg = <0x1a240000 0x1000>, <0x1a244700 0x0100>;
+		reg-names = "mac", "ippc";
+		power-domains = <&scpsys MT7623_POWER_DOMAIN_HIF>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>, <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy2: usb-phy@1a244000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0x1a244000 0x0700>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		u2port1: usb-phy@1a244800 {
+			reg = <0x1a244800 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@1a244900 {
+			reg = <0x1a244900 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7623-ethsys", "syscon";
+		reg = <0x1b000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7623-eth", "syscon";
+		reg = <0x1b100000 0x20000>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&ethsys CLK_ETHSYS_ESW>,
+			 <&ethsys CLK_ETHSYS_GP1>,
+			 <&ethsys CLK_ETHSYS_GP2>,
+			 <&apmixedsys CLK_APMIXED_TRGPLL>;
+		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+		power-domains = <&scpsys MT7623_POWER_DOMAIN_ETH>;
+		resets = <&ethsys ETHSYS_FE_RST>,
+			 <&ethsys ETHSYS_MCM_RST>;
+		reset-names = "fe", "mcm";
+		mediatek,ethsys = <&ethsys>;
+		status = "disabled";
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt7623-pwm";
+		reg = <0x11006000 0x1000>;
+		#clock-cells = <1>;
+		#pwm-cells = <2>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM>,
+			 <&pericfg CLK_PERI_PWM1>,
+			 <&pericfg CLK_PERI_PWM2>,
+			 <&pericfg CLK_PERI_PWM3>,
+			 <&pericfg CLK_PERI_PWM4>,
+			 <&pericfg CLK_PERI_PWM5>;
+		clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
+			      "pwm5";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts b/roms/u-boot/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
new file mode 100644
index 000000000..fdeec75b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt7623.dtsi"
+#include "mt7623-u-boot.dtsi"
+
+/ {
+	model = "UniElec U7623-02 eMMC";
+	compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+		tick-timer = &timer0;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led3 {
+			label = "u7623-01:green:led3";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "u7623-01:green:led4";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+	mediatek,gmac-id = <0>;
+	phy-mode = "rgmii";
+	mediatek,switch = "mt7530";
+	mediatek,mcm;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&pinctrl {
+	ephy_default: ephy_default {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "ephy";
+		};
+
+		conf {
+			pins = "G2_TXEN", "G2_TXD0", "G2_TXD1", "G2_TXD2",
+			       "G2_TXD3", "G2_TXC", "G2_RXC", "G2_RXD0",
+			       "G2_RXD1", "G2_RXD2", "G2_RXD3", "G2_RXDV",
+			       "MDC", "MDIO";
+			drive-strength = <12>;
+			mediatek,tdsel = <5>;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "msdc";
+			groups =  "msdc0";
+		};
+
+		conf-cmd-data {
+			pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+			       "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+			       "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "MSDC0_CLK";
+			bias-pull-down;
+		};
+
+		conf-rst {
+			pins = "MSDC0_RSTB";
+			bias-pull-up;
+		};
+	};
+
+	pcie_default: pcie-default {
+		mux {
+			function = "pcie";
+			groups =  "pcie0_0_perst", "pcie1_0_perst";
+		};
+	};
+
+	uart0_pins_a: uart0-default {
+		mux {
+			function = "uart";
+			groups =  "uart0_0_txd_rxd";
+		};
+	};
+
+	uart1_pins_a: uart1-default {
+		mux {
+			function = "uart";
+			groups =  "uart1_0_txd_rxd";
+		};
+	};
+
+	uart2_pins_a: uart2-default {
+		mux {
+			function = "uart";
+			groups =  "uart2_0_txd_rxd";
+		};
+	};
+
+	uart2_pins_b: uart2-alt {
+		mux {
+			function = "uart";
+			groups =  "uart2_1_txd_rxd";
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts b/roms/u-boot/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 000000000..ef0736962
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt7623.dtsi"
+#include "mt7623-u-boot.dtsi"
+
+/ {
+	model = "Bananapi BPI-R2";
+	compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+	chosen {
+		stdout-path = &uart2;
+		tick-timer = &timer0;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bpi-r2:pio:blue";
+			gpios = <&gpio 241 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green {
+			label = "bpi-r2:pio:green";
+			gpios = <&gpio 240 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red {
+			label = "bpi-r2:pio:red";
+			gpios = <&gpio 239 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+	mediatek,gmac-id = <0>;
+	phy-mode = "rgmii";
+	mediatek,switch = "mt7530";
+	reset-gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&pinctrl {
+	ephy_default: ephy_default {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "ephy";
+		};
+
+		conf {
+			pins = "G2_TXEN", "G2_TXD0", "G2_TXD1", "G2_TXD2",
+			       "G2_TXD3", "G2_TXC", "G2_RXC", "G2_RXD0",
+			       "G2_RXD1", "G2_RXD2", "G2_RXD3", "G2_RXDV",
+			       "MDC", "MDIO";
+			drive-strength = <12>;
+			mediatek,tdsel = <5>;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "msdc";
+			groups =  "msdc0";
+		};
+
+		conf-cmd-data {
+			pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+			       "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+			       "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "MSDC0_CLK";
+			bias-pull-down;
+		};
+
+		conf-rst {
+			pins = "MSDC0_RSTB";
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		mux {
+			function = "msdc";
+			groups =  "msdc1", "msdc1_wp_0";
+		};
+
+		conf-cmd-data {
+			pins = "MSDC1_DAT0", "MSDC1_DAT1", "MSDC1_DAT2",
+			       "MSDC1_DAT3", "MSDC1_DAT3", "MSDC1_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "MSDC1_CLK";
+			drive-strength = <4>;
+		};
+
+		conf-wp {
+			pins = "EINT7";
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	pcie_default: pcie-default {
+		mux {
+			function = "pcie";
+			groups =  "pcie0_0_perst", "pcie1_0_perst";
+		};
+	};
+
+	uart0_pins_a: uart0-default {
+		mux {
+			function = "uart";
+			groups =  "uart0_0_txd_rxd";
+		};
+	};
+
+	uart1_pins_a: uart1-default {
+		mux {
+			function = "uart";
+			groups =  "uart1_0_txd_rxd";
+		};
+	};
+
+	uart2_pins_a: uart2-default {
+		mux {
+			function = "uart";
+			groups =  "uart2_0_txd_rxd";
+		};
+	};
+
+	uart2_pins_b: uart2-alt {
+		mux {
+			function = "uart";
+			groups =  "uart2_1_txd_rxd";
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7629-rfb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/mt7629-rfb-u-boot.dtsi
new file mode 100644
index 000000000..c17e82ace
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7629-rfb-u-boot.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+&infracfg {
+	u-boot,dm-pre-reloc;
+};
+
+&pericfg {
+	u-boot,dm-pre-reloc;
+};
+
+&timer0 {
+	u-boot,dm-pre-reloc;
+};
+
+&mcucfg {
+	u-boot,dm-pre-reloc;
+};
+
+&dramc {
+	u-boot,dm-pre-reloc;
+};
+
+&apmixedsys {
+	u-boot,dm-pre-reloc;
+};
+
+&topckgen {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&snfi {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7629-rfb.dts b/roms/u-boot/arch/arm/dts/mt7629-rfb.dts
new file mode 100644
index 000000000..f2e4e9548
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7629-rfb.dts
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt7629.dtsi"
+#include "mt7629-rfb-u-boot.dtsi"
+
+/ {
+	model = "MediaTek MT7629 RFB";
+	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+
+	aliases {
+		spi0 = &snor;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&eth {
+	status = "okay";
+	mediatek,gmac-id = <0>;
+	phy-mode = "sgmii";
+	mediatek,switch = "mt7531";
+	reset-gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&pinctrl {
+	state_default: pinmux_conf {
+		u-boot,dm-pre-reloc;
+
+		mux {
+			function = "jtag";
+			groups = "ephy_leds_jtag";
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	snfi_pins: snfi-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	snor_pins: snor-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	uart0_pins: uart0-default {
+		mux {
+			function = "uart";
+			groups = "uart0_txd_rxd";
+		};
+	};
+
+	watchdog_pins: watchdog-default {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&snfi {
+	pinctrl-names = "default", "snfi";
+	pinctrl-0 = <&snor_pins>;
+	pinctrl-1 = <&snfi_pins>;
+	status = "disabled";
+
+	spi-flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&snor {
+	pinctrl-names = "default";
+	pinctrl-0 = <&snor_pins>;
+	status = "okay";
+
+	spi-flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/mt7629.dtsi b/roms/u-boot/arch/arm/dts/mt7629.dtsi
new file mode 100644
index 000000000..7dea7809c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt7629.dtsi
@@ -0,0 +1,358 @@
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/clock/mt7629-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/mt7629-power.h>
+#include <dt-bindings/reset/mt7629-reset.h>
+#include <dt-bindings/phy/phy.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "mediatek,mt7629";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1250000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1250000000>;
+		};
+	};
+
+	clk20m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "clk20m";
+	};
+
+	clk40m: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <20000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	infracfg: syscon@10000000 {
+		compatible = "mediatek,mt7629-infracfg", "syscon";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pericfg: syscon@10002000 {
+		compatible = "mediatek,mt7629-pericfg", "syscon";
+		reg = <0x10002000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	timer0: timer@10004000 {
+		compatible = "mediatek,timer";
+		reg = <0x10004000 0x80>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_CLKXTAL_D4>,
+			 <&topckgen CLK_TOP_10M_SEL>;
+		clock-names = "mux", "src";
+	};
+
+	scpsys: scpsys@10006000 {
+		compatible = "mediatek,mt7629-scpsys";
+		reg = <0x10006000 0x1000>;
+		clocks = <&topckgen CLK_TOP_HIF_SEL>;
+		clock-names = "hif_sel";
+		assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+		#power-domain-cells = <1>;
+		infracfg = <&infracfg>;
+	};
+
+	mcucfg: syscon@10200000 {
+		compatible = "mediatek,mt7629-mcucfg", "syscon";
+		reg = <0x10200000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	sysirq: interrupt-controller@10200a80 {
+		compatible = "mediatek,sysirq";
+		reg = <0x10200a80 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	dramc: dramc@10203000 {
+		compatible = "mediatek,mt7629-dramc";
+		reg = <0x10203000 0x600>,	/* EMI */
+		      <0x10213000 0x1000>,	/* DDRPHY */
+		      <0x10214000 0xd00>;	/* DRAMC_AO */
+		clocks = <&topckgen CLK_TOP_DDRPHYCFG_SEL>,
+			 <&topckgen CLK_TOP_SYSPLL1_D8>,
+			 <&topckgen CLK_TOP_MEM_SEL>,
+			 <&topckgen CLK_TOP_DMPLL>;
+		clock-names = "phy", "phy_mux", "mem", "mem_mux";
+	};
+
+	apmixedsys: clock-controller@10209000 {
+		compatible = "mediatek,mt7629-apmixedsys";
+		reg = <0x10209000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	topckgen: clock-controller@10210000 {
+		compatible = "mediatek,mt7629-topckgen";
+		reg = <0x10210000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	watchdog: watchdog@10212000 {
+		compatible = "mediatek,wdt";
+		reg = <0x10212000 0x600>;
+		interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_FALLING>;
+		#reset-cells = <1>;
+		status = "disabled";
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&watchdog>;
+	};
+
+	pinctrl: pinctrl@10217000 {
+		compatible = "mediatek,mt7629-pinctrl";
+		reg = <0x10217000 0x8000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux_conf {
+		};
+
+		gpio: gpio-controller {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10310000 0x1000>,
+		      <0x10320000 0x1000>,
+		      <0x10340000 0x2000>,
+		      <0x10360000 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11002000 0x400>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART0_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+		assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11003000 0x400>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART1_PD>;
+		clock-names = "baud", "bus";
+		assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11004000 0x400>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART2_PD>;
+		clock-names = "baud", "bus";
+		assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+		status = "disabled";
+	};
+
+	snfi: snfi@1100d000 {
+		compatible = "mediatek,mtk-snfi-spi";
+		reg = <0x1100d000 0x2000>;
+		clocks = <&pericfg CLK_PERI_NFI_PD>,
+			 <&pericfg CLK_PERI_SNFI_PD>;
+		clock-names = "nfi_clk", "pad_clk";
+		assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
+				  <&topckgen CLK_TOP_NFI_INFRA_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
+					 <&topckgen CLK_TOP_UNIVPLL2_D8>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	snor: snor@11014000 {
+		compatible = "mediatek,mtk-snor";
+		reg = <0x11014000 0x1000>;
+		clocks = <&pericfg CLK_PERI_FLASH_PD>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	ssusbsys: ssusbsys@1a000000 {
+		compatible = "mediatek,mt7629-ssusbsys", "syscon";
+		reg = <0x1a000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	xhci: usb@1a0c0000 {
+		compatible = "mediatek,mt7629-xhci", "mediatek,mtk-xhci";
+		reg = <0x1a0c0000 0x1000>, <0x1a0c3e00 0x0100>;
+		reg-names = "mac", "ippc";
+		power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF1>;
+		clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+			 <&ssusbsys CLK_SSUSB_REF_EN>,
+			 <&ssusbsys CLK_SSUSB_MCU_EN>,
+			 <&ssusbsys CLK_SSUSB_DMA_EN>;
+		clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy: usb-phy@1a0c4000 {
+		compatible = "mediatek,mt7629-tphy", "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1a0c4000 0x1000>;
+		status = "disabled";
+
+		u2port0: usb-phy@0 {
+			reg = <0x0 0x0700>;
+			#phy-cells = <1>;
+			clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+			clock-names = "ref";
+		};
+
+		u3port0: usb-phy@700 {
+			reg = <0x0700 0x0700>;
+			#phy-cells = <1>;
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7629-ethsys", "syscon";
+		reg = <0x1b000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7629-eth", "syscon";
+		reg = <0x1b100000 0x20000>;
+		clocks = <&topckgen CLK_TOP_ETH_SEL>,
+			<&topckgen CLK_TOP_F10M_REF_SEL>,
+			<&ethsys CLK_ETH_ESW_EN>,
+			<&ethsys CLK_ETH_GP0_EN>,
+			<&ethsys CLK_ETH_GP1_EN>,
+			<&ethsys CLK_ETH_GP2_EN>,
+			<&ethsys CLK_ETH_FE_EN>,
+			<&sgmiisys0 CLK_SGMII_TX_EN>,
+			<&sgmiisys0 CLK_SGMII_RX_EN>,
+			<&sgmiisys0 CLK_SGMII_CDR_REF>,
+			<&sgmiisys0 CLK_SGMII_CDR_FB>,
+			<&sgmiisys1 CLK_SGMII_TX_EN>,
+			<&sgmiisys1 CLK_SGMII_RX_EN>,
+			<&sgmiisys1 CLK_SGMII_CDR_REF>,
+			<&sgmiisys1 CLK_SGMII_CDR_FB>,
+			<&apmixedsys CLK_APMIXED_SGMIPLL>,
+			<&apmixedsys CLK_APMIXED_ETH2PLL>;
+		clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2",
+				"fe", "sgmii_tx250m", "sgmii_rx250m",
+				"sgmii_cdr_ref", "sgmii_cdr_fb",
+				"sgmii2_tx250m", "sgmii2_rx250m",
+				"sgmii2_cdr_ref", "sgmii2_cdr_fb",
+				"sgmii_ck", "eth2pll";
+		assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				  <&topckgen CLK_TOP_F10M_REF_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>,
+					 <&topckgen CLK_TOP_SGMIIPLL_D2>;
+		power-domains = <&scpsys MT7629_POWER_DOMAIN_ETHSYS>;
+		resets = <&ethsys ETHSYS_FE_RST>;
+		reset-names = "fe";
+		mediatek,ethsys = <&ethsys>;
+		mediatek,sgmiisys = <&sgmiisys0>;
+		mediatek,infracfg = <&infracfg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sgmiisys0: syscon@1b128000 {
+		compatible = "mediatek,mt7629-sgmiisys", "syscon";
+		reg = <0x1b128000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	sgmiisys1: syscon@1b130000 {
+		compatible = "mediatek,mt7629-sgmiisys", "syscon";
+		reg = <0x1b130000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt7629-pwm";
+		reg = <0x11006000 0x1000>;
+		#clock-cells = <1>;
+		#pwm-cells = <2>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM_PD>,
+			 <&pericfg CLK_PERI_PWM1_PD>;
+		clock-names = "top", "main", "pwm1";
+		assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>;
+		status = "disabled";
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8183-pumpkin.dts b/roms/u-boot/arch/arm/dts/mt8183-pumpkin.dts
new file mode 100644
index 000000000..470a76939
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8183-pumpkin.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 BayLibre SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <config.h>
+#include "mt8183.dtsi"
+
+/ {
+	model = "MediaTek MT8183 pumpkin board";
+	compatible = "mediatek,mt8183-pumpkin", "mediatek,mt8183";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x30000>;
+		};
+
+		/* 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	cap-mmc-hw-reset;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&ssusb {
+	mediatek,force-vbus;
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8183.dtsi b/roms/u-boot/arch/arm/dts/mt8183.dtsi
new file mode 100644
index 000000000..294aa2b89
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8183.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Copyright (C) 2021 BayLibre, SAS
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *         Erin Lo <erin.lo@mediatek.com>
+ *         Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/mt8183-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt8183";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+		};
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8183-wdt",
+				      "mediatek,wdt";
+			reg = <0 0x10007000 0 0x100>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c100000 0 0x200000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
+		};
+
+		sysirq: interrupt-controller@c530a80 {
+			compatible = "mediatek,mt8183-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x0c530a80 0 0x50>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8183-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8183-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8183-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8183-uart",
+				     "mediatek,hsuart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clock-frequency = <26000000>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>,
+				 <&infracfg CLK_INFRA_MSDC0>,
+				 <&infracfg CLK_INFRA_MSDC0_SCK>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		u3phy: usb-phy@11f40000 {
+			compatible = "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "okay";
+
+			u2port0: usb-phy2@11f40000 {
+				reg = <0 0x11f40000 0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy3@11f40700 {
+				reg = <0 0x11f40700 0 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		usb: usb@11200000 {
+			compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+			reg = <0 0x11200000 0 0x3e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+				 <&infracfg CLK_INFRA_USB>;
+			clock-names = "sys_ck", "ref_ck";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			ssusb: ssusb@11200000 {
+				compatible = "mediatek,ssusb";
+				reg = <0 0x11200000 0 0x3e00>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+				status = "disabled";
+			};
+
+			usb_host: xhci@11200000 {
+				compatible = "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+					 <&infracfg CLK_INFRA_USB>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8512-bm1-emmc.dts b/roms/u-boot/arch/arm/dts/mt8512-bm1-emmc.dts
new file mode 100644
index 000000000..12511b5fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8512-bm1-emmc.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+
+#include <config.h>
+#include "mt8512.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "MT8512 BM1 EMMC";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_p0_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "p0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p1_vbus: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "p1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	cap-mmc-hw-reset;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	status = "okay";
+};
+
+&pinctrl {
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "msdc";
+			groups =  "msdc0";
+		};
+
+		conf-cmd-data {
+			pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+			       "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+			       "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "MSDC0_CLK";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		conf-rst {
+			pins = "MSDC0_RSTB";
+			bias-pull-up;
+		};
+	};
+
+		uart0_pins: uart0 {
+			mux {
+				function = "uart";
+				groups = "uart0_0_rxd_txd";
+			};
+		};
+};
+
+&ssusb {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb3 {
+	vbus-supply = <&usb_p0_vbus>;
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8512.dtsi b/roms/u-boot/arch/arm/dts/mt8512.dtsi
new file mode 100644
index 000000000..bdb84f8ef
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8512.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt8512-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt8512";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	gic: interrupt-controller@c000000 {
+		 compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0xc000000 0x40000>,	/* GICD */
+			  <0xc080000 0x200000>; /* GICR */
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	topckgen: clock-controller@10000000 {
+		compatible = "mediatek,mt8512-topckgen";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	topckgen_cg: clock-controller-cg@10000000 {
+		compatible = "mediatek,mt8512-topckgen-cg";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: clock-controller@10001000 {
+		compatible = "mediatek,mt8512-infracfg";
+		reg = <0x10001000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pinctrl: pinctrl@10005000 {
+		compatible = "mediatek,mt8512-pinctrl";
+		reg = <0x10005000 0x1000>;
+		gpio: gpio-controller {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	watchdog0: watchdog@10007000 {
+		compatible = "mediatek,wdt";
+		reg = <0x10007000 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_FALLING>;
+		#reset-cells = <1>;
+		status = "disabled";
+		timeout-sec = <60>;
+		reset-on-timeout;
+	};
+
+	timer0: apxgpt@10008000 {
+		compatible = "mediatek,timer";
+		reg = <0x10008000 0x1000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYS_26M_D2>,
+			 <&topckgen CLK_TOP_CLK32K>,
+			 <&infracfg CLK_INFRA_APXGPT>;
+		clock-names = "clk13m",
+			 "clk32k",
+			 "bus";
+	};
+
+	apmixedsys: clock-controller@1000c000 {
+		compatible = "mediatek,mt8512-apmixedsys";
+		reg = <0x1000c000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	sysirq: interrupt-controller@10200a80 {
+		compatible = "mediatek,sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200a80 0x50>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11002000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_CLK26M>,
+			<&infracfg CLK_INFRA_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	usb3: usb@11213e00 {
+		compatible = "mediatek,mt8512-mtu3", "mediatek,mtu3";
+		reg = <0x11213e00 0x0100>;
+		reg-names = "ippc";
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u2port1 PHY_TYPE_USB2>;
+		clocks = <&infracfg CLK_INFRA_USB_SYS>,
+			 <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+			 <&infracfg CLK_INFRA_ICUSB>;
+		clock-names = "sys_ck", "ref_ck", "mcu_ck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		ssusb: usb@11210000 {
+			compatible = "mediatek,ssusb";
+			reg = <0x11210000 0x3e00>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+			reg-names = "mac";
+			status = "disabled";
+		};
+	};
+
+	u3phy: usb-phy@11cc0000 {
+		compatible = "mediatek,mt8512-tphy",
+			     "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@11cc0000 {
+			reg = <0x11cc0000 0x400>;
+			clocks = <&topckgen CLK_TOP_USB20_48M_EN>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u2port1: usb-phy@11c40000 {
+			reg = <0x11c40000 0x400>;
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt8512-mmc";
+		reg = <0x11230000 0x1000>,
+		      <0x11cd0000 0x1000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+			 <&infracfg CLK_INFRA_MSDC0>,
+			 <&infracfg CLK_INFRA_MSDC0_SRC>;
+		clock-names = "source", "hclk", "source_cg";
+		status = "disabled";
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8516-pumpkin.dts b/roms/u-boot/arch/arm/dts/mt8516-pumpkin.dts
new file mode 100644
index 000000000..292b00f0f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8516-pumpkin.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2019 BayLibre SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <config.h>
+#include "mt8516.dtsi"
+
+/ {
+	model = "Pumpkin MT8516";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x20000>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	cap-mmc-hw-reset;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	status = "okay";
+};
+
+&pinctrl {
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "msdc";
+			groups =  "msdc0";
+		};
+
+		conf-cmd-data {
+			pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+			       "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+			       "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "MSDC0_CLK";
+			bias-pull-down;
+		};
+
+		conf-rst {
+			pins = "MSDC0_RSTB";
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0 {
+		mux {
+			function = "uart";
+			groups = "uart0_0_rxd_txd";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+
+	usb_con_c: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8516-u-boot.dtsi b/roms/u-boot/arch/arm/dts/mt8516-u-boot.dtsi
new file mode 100644
index 000000000..3c0d843f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8516-u-boot.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+&infracfg {
+	u-boot,dm-pre-reloc;
+};
+
+&topckgen_ {
+	u-boot,dm-pre-reloc;
+};
+
+&topckgen_cg {
+	u-boot,dm-pre-reloc;
+};
+
+&apmixedsys {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8516.dtsi b/roms/u-boot/arch/arm/dts/mt8516.dtsi
new file mode 100644
index 000000000..c4577ceea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8516.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mt8516-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt8516";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt8516-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x1>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x3>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	topckgen: clock-controller@10000000 {
+		compatible = "mediatek,mt8516-topckgen";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	topckgen_cg: clock-controller-cg@10000000 {
+		compatible = "mediatek,mt8516-topckgen-cg";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: clock-controller@10001000 {
+		compatible = "mediatek,mt8516-infracfg";
+		reg = <0x10001000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	apmixedsys: clock-controller@10018000 {
+		compatible = "mediatek,mt8516-apmixedsys";
+		reg = <0x10018000 0x710>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@10310000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10310000 0x1000>,
+		      <0x10320000 0x1000>,
+		      <0x10340000 0x2000>,
+		      <0x10360000 0x2000>;
+		interrupts = <GIC_PPI 9
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	sysirq: interrupt-controller@10200620 {
+		compatible = "mediatek,sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200620 0x20>;
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,wdt";
+		reg = <0x10007000 0x1000>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+		#reset-cells = <1>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl@10005000 {
+		compatible = "mediatek,mt8516-pinctrl";
+		reg = <0x10005000 0x1000>;
+
+		gpio: gpio-controller {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	mmc0: mmc@11120000 {
+		compatible = "mediatek,mt8516-mmc";
+		reg = <0x11120000 0x1000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen_cg CLK_TOP_MSDC0>,
+			 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+			 <&topckgen_cg CLK_TOP_MSDC0_INFRA>;
+		clock-names = "source", "hclk", "source_cg";
+		status = "disabled";
+	};
+
+	usb0: usb@11100000 {
+		compatible = "mediatek,mt8516-musb",
+			     "mediatek,mt8518-musb";
+		reg = <0x11100000 0x1000>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		clocks = <&topckgen CLK_TOP_USB_PHY48M>,
+			 <&topckgen_cg CLK_TOP_USBIF>,
+			 <&topckgen_cg CLK_TOP_USB>,
+			 <&topckgen_cg CLK_TOP_USB_1P>;
+		clock-names = "usbpll", "usbmcu", "usb", "icusb";
+		status = "disabled";
+	};
+
+	uart0: serial@11005000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11005000 0x1000>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART0_SEL>,
+			 <&topckgen_cg CLK_TOP_UART0>;
+		clock-names = "baud","bus";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8518-ap1-emmc.dts b/roms/u-boot/arch/arm/dts/mt8518-ap1-emmc.dts
new file mode 100644
index 000000000..f017ee443
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8518-ap1-emmc.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+
+#include <config.h>
+#include "mt8518.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "MT8518 AP1 EMMC";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	cap-mmc-hw-reset;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	status = "okay";
+};
+
+&pinctrl {
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "msdc";
+			groups =  "msdc0";
+		};
+
+		conf-cmd-data {
+			pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+			       "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+			       "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "MSDC0_CLK";
+			bias-pull-down;
+		};
+
+		conf-rst {
+			pins = "MSDC0_RSTB";
+			bias-pull-up;
+		};
+	};
+
+		uart0_pins: uart0 {
+			mux {
+				function = "uart";
+				groups = "uart0_0_rxd_txd";
+			};
+		};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/mt8518.dtsi b/roms/u-boot/arch/arm/dts/mt8518.dtsi
new file mode 100644
index 000000000..56da91a9f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mt8518.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt8518-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt8518";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+
+
+	topckgen: clock-controller@10000000 {
+		compatible = "mediatek,mt8518-topckgen";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@0c000000 {
+		 compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0xc000000 0x40000>,	/* GICD */
+			  <0xc100000 0x200000>; /* GICR */
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	sysirq: interrupt-controller@10200a80 {
+		compatible = "mediatek,sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200a80 0x50>;
+	};
+
+	timer0: apxgpt@10008000 {
+		compatible = "mediatek,timer";
+		reg = <0x10008000 0x1000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_CLK26M_D2>,
+			 <&topckgen CLK_TOP_CLK32K>,
+			 <&topckgen CLK_TOP_APXGPT>;
+		clock-names = "clk13m",
+			 "clk32k",
+			 "bus";
+	};
+
+	watchdog0: watchdog@10007000 {
+		compatible = "mediatek,wdt";
+		reg = <0x10007000 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_FALLING>;
+		#reset-cells = <1>;
+		status = "disabled";
+		timeout-sec = <60>;
+		reset-on-timeout;
+	};
+
+	pinctrl: pinctrl@10005000 {
+		compatible = "mediatek,mt8518-pinctrl";
+		reg = <0x10005000 0x1000>;
+		gpio: gpio-controller {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	usb0: usb@11100000 {
+		compatible = "mediatek,mt8518-musb";
+		reg = <0x11100000 0x1000>;
+		reg-names = "control";
+		clocks = <&topckgen CLK_TOP_USB20_48M>,
+			 <&topckgen CLK_TOP_USBIF>,
+			 <&topckgen CLK_TOP_USB>;
+		clock-names = "usbpll", "usbmcu", "usb";
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		status = "okay";
+	};
+
+	mmc0: mmc@11120000 {
+		compatible = "mediatek,mt8516-mmc";
+		reg = <0x11120000 0x1000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_MSDC0>,
+			<&topckgen CLK_TOP_MSDC0>,
+			<&topckgen CLK_TOP_MSDC0_B>;
+		clock-names = "source", "hclk", "source_cg";
+		status = "disabled";
+	};
+
+	uart0: serial@11005000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11005000 0x1000>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART0_SEL>,
+			<&topckgen CLK_TOP_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/mxs-pinfunc.h b/roms/u-boot/arch/arm/dts/mxs-pinfunc.h
new file mode 100644
index 000000000..c6da987b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/mxs-pinfunc.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/roms/u-boot/arch/arm/dts/ns3-board.dts b/roms/u-boot/arch/arm/dts/ns3-board.dts
new file mode 100644
index 000000000..4e0966a13
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ns3-board.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier:      GPL-2.0+
+/*
+ * Copyright (C) 2020 Broadcom
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/memory/bcm-ns3-mc.h>
+
+/*
+ * Single mem reserve region which includes the following:
+ * Components name	Start Addr	Size
+ * ------------------------------------------------
+ * GIC LPI tables	0x8ad7_0000	0x0009_0000
+ * Nitro FW		0x8ae0_0000	0x0020_0000
+ * Nitro Crash dump	0x8b00_0000	0x0200_0000
+ * OPTEE OS		0x8d00_0000	0x0200_0000
+ * BL31 services	0x8f00_0000	0x0010_0000
+ * Tmon			0x8f10_0000	0x0000_1000
+ * LPM/reserved		0x8f10_1000	0x0000_1000
+ * ATF to Bl33 info	0x8f10_2000	0x0000_1000
+ * ATF error logs	0x8f10_3000	0x0001_0000
+ * Error log parser	0x8f11_3000	0x0010_0000
+ */
+
+/memreserve/ BCM_NS3_MEM_RSVE_START BCM_NS3_MEM_RSVE_END;
+
+/* CRMU page tables */
+/memreserve/ BCM_NS3_CRMU_PGT_START BCM_NS3_CRMU_PGT_SIZE;
+
+#include "ns3.dtsi"
+
+/ {
+	model = "NS3 model";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/ns3.dtsi b/roms/u-boot/arch/arm/dts/ns3.dtsi
new file mode 100644
index 000000000..09098aac3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ns3.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier:      GPL-2.0+
+/*
+ * Copyright (C) 2020 Broadcom
+ */
+
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "brcm,ns3";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>,
+			<0x8 0x80000000 0x1 0x80000000>;
+	};
+
+	hsls {
+		compatible = "simple-bus";
+		dma-ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x68900000 0x17700000>;
+
+		uart1: uart@110000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00110000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/o4-imx-nano.dts b/roms/u-boot/arch/arm/dts/o4-imx-nano.dts
new file mode 100644
index 000000000..54d32f9dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/o4-imx-nano.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua>
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "o4-imx6ull-nano.dtsi"
+
+/ {
+	model = "O4-iMX-NANO";
+	compatible = "out4,o4-imx-nano",
+		     "out4,o4-imx6ull-nano",
+		     "fsl,imx6ull";
+
+	aliases {
+		mmc1 = &usdhc1;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pcf8574a 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led1{
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pcf8574a 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&pcf8574a 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led3 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pcf8574a 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led4{
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pcf8574a 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led5 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pcf8574a 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usbotg1_vbus: reg_usbotg1_vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pcf8574a 6 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb0";
+	};
+
+	usbotg2_vbus: reg_usbotg2_vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pcf8574a 7 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb1";
+	};
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
+		>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0xb0b0 /* RST */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_CSI_VSYNC__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20	0x1b8b0
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19	0x1b8b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usdhc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default";
+	status = "okay";
+	wakeup-source;
+};
+
+&fec1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&fec2 {
+	phy-handle = <&phy1>;
+	phy-mode = "rmii";
+	phy-reset-duration = <250>;
+	phy-reset-post-delay = <100>;
+	phy-reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_fec2 &pinctrl_mdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			interrupt-parent = <&gpio5>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-0 = <&pinctrl_phy0_irq>;
+			pinctrl-names = "default";
+			reg = <0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+			interrupt-parent = <&gpio5>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-0 = <&pinctrl_phy1_irq>;
+			pinctrl-names = "default";
+			reg = <1>;
+		};
+	};
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	status = "okay";
+	vbus-supply = <&usbotg1_vbus>;
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+	vbus-supply = <&usbotg2_vbus>;
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio4 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pcf8574a: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x38>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+	uart-has-rtscts;
+};
diff --git a/roms/u-boot/arch/arm/dts/o4-imx6ull-nano.dtsi b/roms/u-boot/arch/arm/dts/o4-imx6ull-nano.dtsi
new file mode 100644
index 000000000..3fefa80ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/o4-imx6ull-nano.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua>
+
+/dts-v1/;
+
+#include "imx6ull.dtsi"
+
+/ {
+	model = "O4-iMX6ULL-NANO";
+	compatible = "out4,o4-imx6ull-nano", "fsl,imx6ull";
+
+	aliases {
+		mmc0 = &usdhc2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_phy0_irq: phy0grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x79
+		>;
+	};
+
+	pinctrl_phy1_irq: phy1grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x79
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/omap-gpmc-smsc911x.dtsi b/roms/u-boot/arch/arm/dts/omap-gpmc-smsc911x.dtsi
new file mode 100644
index 000000000..ded7e8fec
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap-gpmc-smsc911x.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for GPMC connected smsc911x on omaps
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,device-width = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <5>;
+		gpmc,cs-rd-off-ns = <150>;
+		gpmc,cs-wr-off-ns = <150>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <40>;
+		gpmc,oe-on-ns = <45>;
+		gpmc,oe-off-ns = <140>;
+		gpmc,we-on-ns = <45>;
+		gpmc,we-off-ns = <140>;
+		gpmc,rd-cycle-ns = <155>;
+		gpmc,wr-cycle-ns = <155>;
+		gpmc,access-ns = <120>;
+		gpmc,page-burst-access-ns = <20>;
+		gpmc,bus-turnaround-ns = <75>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap-gpmc-smsc9221.dtsi b/roms/u-boot/arch/arm/dts/omap-gpmc-smsc9221.dtsi
new file mode 100644
index 000000000..73e272fad
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap-gpmc-smsc9221.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Common file for GPMC connected smsc9221 on omaps
+ *
+ * Compared to smsc911x, smsc9221 (and others like smsc9217
+ * or smsc 9218) has faster timings, leading to higher
+ * bandwidth.
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-beagle-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap3-beagle-u-boot.dtsi
new file mode 100644
index 000000000..2c03701c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-beagle-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
new file mode 100644
index 000000000..2c03701c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-beagle-xm-ab.dts b/roms/u-boot/arch/arm/dts/omap3-beagle-xm-ab.dts
new file mode 100644
index 000000000..7ac3bcf59
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-beagle-xm-ab.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-beagle-xm.dts"
+
+/ {
+	/* HS USB Port 2 Power enable was inverted with the xM C */
+	hsusb2_power: hsusb2_power_reg {
+		enable-active-high;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
new file mode 100644
index 000000000..2c03701c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-beagle-xm.dts b/roms/u-boot/arch/arm/dts/omap3-beagle-xm.dts
new file mode 100644
index 000000000..0349fcc9d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-beagle-xm.dts
@@ -0,0 +1,409 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard xM";
+	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+		ethernet = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			pwms = <&twl_pwmled 1 7812500>;
+			max-brightness = <127>;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x114>;
+			wakeup-source;
+		};
+
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+		/* XXX pinctrl from twl */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	etb@5401b000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x5401b000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm@54010000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x54010000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+		>;
+	};
+
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+			ti,use_poweroff;
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@2 {
+		compatible = "usb424,9514";
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-beagle.dts b/roms/u-boot/arch/arm/dts/omap3-beagle.dts
new file mode 100644
index 000000000..3ca8991a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-beagle.dts
@@ -0,0 +1,436 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x114>;
+			wakeup-source;
+		};
+
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	etb@540000000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x5401b000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm@54010000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x54010000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux2 {
+	regulator-name = "vdd_ehci";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
+
+&gpmc {
+	status = "ok";
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0 space, 16MB */
+
+	/* Chip select 0 */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* NAND I/O window, 4 bytes */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "ham1";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpmc,device-width = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <36>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <24>;
+		gpmc,adv-wr-off-ns = <36>;
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <30>;
+		gpmc,rd-cycle-ns = <72>;
+		gpmc,wr-cycle-ns = <72>;
+		gpmc,access-ns = <54>;
+		gpmc,wr-access-ns = <30>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+		partition@1c0000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-cpu-thermal.dtsi b/roms/u-boot/arch/arm/dts/omap3-cpu-thermal.dtsi
new file mode 100644
index 000000000..235ecfd61
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-cpu-thermal.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Device Tree Source for OMAP3 SoC CPU thermal
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+	coefficients = <0 20000>;
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
new file mode 100644
index 000000000..97a8141c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ethernet@2c000000 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		reg = <0x2c000000 0xff>;
+		bank-width = <2>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-evm-37xx.dts b/roms/u-boot/arch/arm/dts/omap3-evm-37xx.dts
new file mode 100644
index 000000000..a14303b09
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-evm-37xx.dts
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
+
+/ {
+	model = "TI OMAP37XX EVM (TMDSEVM3730)";
+	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+
+	ehci_phy_pins: pinmux_ehci_phy_pins {
+		pinctrl-single,pins = <
+
+		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
+		OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+		/* EHCI VBUS etk_d8.gpio_22 */
+		OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+
+		/* etk_d10.hsusb2_clk */
+		OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d11.hsusb2_stp */
+		OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d12.hsusb2_dir */
+		OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d13.hsusb2_nxt */
+		OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d14.hsusb2_data0 */
+		OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d15.hsusb2_data1 */
+		OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+&gpmc {
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x780000 0x1f880000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-evm-common.dtsi b/roms/u-boot/arch/arm/dts/omap3-evm-common.dtsi
new file mode 100644
index 000000000..17c89df6c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-evm-common.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for omap3 EVM boards
+ */
+
+#include <dt-bindings/input/input.h>
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
+};
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&lcd_3v3 {
+	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
+};
+
+&lcd0 {
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;		/* gpio175 */
+		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		/* gpio_149 with uart1_rts pad as wakeirq */
+		interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
+				      <&omap3_pmx_core 0x14e>;
+		interrupt-names = "irq", "wakeup";
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&twl_keypad {
+	linux,keymap = <
+			MATRIX_KEY(2, 2, KEY_1)
+			MATRIX_KEY(1, 1, KEY_2)
+			MATRIX_KEY(0, 0, KEY_3)
+			MATRIX_KEY(3, 2, KEY_4)
+			MATRIX_KEY(2, 1, KEY_5)
+			MATRIX_KEY(1, 0, KEY_6)
+			MATRIX_KEY(1, 3, KEY_7)
+			MATRIX_KEY(3, 1, KEY_8)
+			MATRIX_KEY(2, 0, KEY_9)
+			MATRIX_KEY(2, 3, KEY_KPASTERISK)
+			MATRIX_KEY(0, 2, KEY_0)
+			MATRIX_KEY(3, 0, KEY_KPDOT)
+			/* s4 not wired */
+			MATRIX_KEY(1, 2, KEY_BACKSPACE)
+			MATRIX_KEY(0, 1, KEY_ENTER)
+			>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ethernet@gpmc {
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		reg = <5 0 0xff>;
+	};
+};
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-evm-processor-common.dtsi b/roms/u-boot/arch/arm/dts/omap3-evm-processor-common.dtsi
new file mode 100644
index 000000000..b4109f48e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-evm-processor-common.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Common support for omap3 EVM 35xx/37xx processor modules
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+	};
+};
+
+&dss {
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&lcd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+};
+
+&hsusb2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehci_phy_pins>;
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)	/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
+	on_board_gpio_61: pinmux_ehci_port_select_pins {
+		pinctrl-single,pins = <
+		OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+
+		/* mcspi1_cs3.hsusb2_data2 */
+		OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_clk.hsusb2_data7 */
+		OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_simo.hsusb2_data4 */
+		OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_somi.hsusb2_data5 */
+		OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_cs0.hsusb2_data6 */
+		OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_cs1.hsusb2_data3 */
+		OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+
+	/*
+	 * Note that gpio_150 pulled high with internal pull to prevent wlcore
+	 * reset on return from off mode in idle.
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7)		/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+		>;
+	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+/*
+ * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
+ * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
+ */
+&gpio2 {
+	en_usb2_port {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
+		output-low;
+		line-name = "enable usb2 port";
+	};
+};
+
+/* T2_GPIO_2 low to route GPIO_61 to on-board devices */
+&twl_gpio {
+	en_on_board_gpio_61 {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "en_hsusb2_clk";
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0: 16MB for NAND */
+		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for LAN9220 */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-evm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap3-evm-u-boot.dtsi
new file mode 100644
index 000000000..97a8141c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-evm-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ethernet@2c000000 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		reg = <0x2c000000 0xff>;
+		bank-width = <2>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-evm.dts b/roms/u-boot/arch/arm/dts/omap3-evm.dts
new file mode 100644
index 000000000..21a3b88ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-evm.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
+
+/ {
+	model = "TI OMAP35XX EVM (TMDSEVM3530)";
+	compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+
+	ehci_phy_pins: pinmux_ehci_phy_pins {
+		pinctrl-single,pins = <
+
+		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
+		OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+		/* EHCI VBUS etk_d8.gpio_22 */
+		OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+
+		/* etk_d10.hsusb2_clk */
+		OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d11.hsusb2_stp */
+		OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d12.hsusb2_dir */
+		OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d13.hsusb2_nxt */
+		OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d14.hsusb2_data0 */
+		OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d15.hsusb2_data1 */
+		OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+&gpmc {
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "micron,mt29f2g16abdhc";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-igep.dtsi b/roms/u-boot/arch/arm/dts/omap3-igep.dtsi
new file mode 100644
index 000000000..f33cc80c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-igep.dtsi
@@ -0,0 +1,250 @@
+/*
+ * Common device tree for IGEP boards based on AM/DM37x
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "igep2";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	vdd33: regulator-vdd33 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33";
+		regulator-always-on;
+	};
+
+};
+
+&omap3_pmx_core {
+	gpmc_pins: pinmux_gpmc_pins {
+		pinctrl-single,pins = <
+			/* OneNAND seems to require PIN_INPUT on clock. */
+                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)	/* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)	/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx.uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx.uart3_tx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
+		>;
+	};
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "micron,mt29c4g96maz";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		status = "okay";
+	};
+
+	onenand@0,0 {
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-wrap;
+		gpmc,burst-read;
+		gpmc,burst-write;
+		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <96>;
+		gpmc,cs-wr-off-ns = <96>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <18>;
+		gpmc,oe-off-ns = <96>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <96>;
+		gpmc,rd-cycle-ns = <114>;
+		gpmc,wr-cycle-ns = <114>;
+		gpmc,access-ns = <90>;
+		gpmc,page-burst-access-ns = <12>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <6>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <90>;
+		gpmc,sync-clk-ps = <12000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		status = "disabled";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-igep0020-common.dtsi b/roms/u-boot/arch/arm/dts/omap3-igep0020-common.dtsi
new file mode 100644
index 000000000..ecbec23af
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-igep0020-common.dtsi
@@ -0,0 +1,264 @@
+/*
+ * Common Device Tree Source for IGEPv2
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+		compatible = "gpio-leds";
+
+		boot {
+			 label = "omap3:green:boot";
+			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			 default-state = "on";
+		};
+
+		user0 {
+			 label = "omap3:red:user0";
+			 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+			 default-state = "off";
+		};
+
+		user1 {
+			 label = "omap3:red:user1";
+			 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			 default-state = "off";
+		};
+
+		user2 {
+			label = "omap3:green:user1";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+		vcc-supply = <&hsusb1_power>;
+		#phy-cells = <0>;
+	};
+
+	tfp410: encoder {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&tfp410_pins
+		&dss_dpi_pins
+	>;
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+		>;
+	};
+
+	smsc9221_pins: pinmux_smsc9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_pins
+	>;
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+		>;
+	};
+
+	mmc1_wp_pins: pinmux_mmc1_cd_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4)   /* etk_d15.gpio_29 */
+		>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in the EEPROM
+	 * as EDID data.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x01000000>,	/* CS0: 16MB for NAND */
+		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for ethernet */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc9221_pins>;
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&vpll2 {
+	/* Needed for DSS */
+	regulator-name = "vdds_dsi";
+};
+
+&dss {
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;	/* gpio_29 */
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-igep0020-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap3-igep0020-u-boot.dtsi
new file mode 100644
index 000000000..41beaf090
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-igep0020-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
+ */
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&uart1 {
+	reg-shift = <2>;
+};
+
+&uart2 {
+	reg-shift = <2>;
+};
+
+&uart3 {
+	reg-shift = <2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-igep0020.dts b/roms/u-boot/arch/arm/dts/omap3-igep0020.dts
new file mode 100644
index 000000000..33d6b4ead
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-igep0020.dts
@@ -0,0 +1,50 @@
+/*
+ * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
+
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsdio_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
+			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
+	};
+};
+
+&omap3_pmx_core {
+	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
+		>;
+	};
+};
+
+/* On board Wifi module */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/roms/u-boot/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
new file mode 100644
index 000000000..b8b9fcc41
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for omap dpi panels with QVGA and reset pins
+ *
+ * Note that the board specifc DTS file needs to specify
+ * at minimum the GPIO enable-gpios for display, and
+ * gpios for gpio-backlight.
+ */
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight0: backlight {
+		compatible = "gpio-backlight";
+		default-on;
+	};
+
+	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	lcd0: display {
+		compatible = "sharp,ls037v7dw01";
+		label = "lcd";
+		power-supply = <&lcd_3v3>;
+		envdd-supply = <&lcd_3v3>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <18>;
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		reg = <0>;			/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&lcd_3v3>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,swap-xy;
+		wakeup-source;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap3-u-boot.dtsi
new file mode 100644
index 000000000..32bea6b6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3-u-boot.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap5-u-boot.dtsi"
+ */
+
+/{
+	ocp@68000000 {
+		u-boot,dm-spl;
+
+		bandgap@48002524 {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&uart1 {
+	u-boot,dm-spl;
+	reg-shift = <2>;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+	reg-shift = <2>;
+};
+
+&uart3 {
+	u-boot,dm-spl;
+	reg-shift = <2>;
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+};
+
+&mmc2 {
+	u-boot,dm-spl;
+};
+
+&l4_core {
+	u-boot,dm-spl;
+};
+
+&scm {
+	u-boot,dm-spl;
+};
+
+&scm_conf {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&gpio6 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/omap3.dtsi b/roms/u-boot/arch/arm/dts/omap3.dtsi
new file mode 100644
index 000000000..4043ecb38
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3.dtsi
@@ -0,0 +1,840 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+	compatible = "ti,omap3430", "ti,omap3";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0x0>;
+
+			clocks = <&dpll1_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	pmu@54000000 {
+		compatible = "arm,cortex-a8-pmu";
+		reg = <0x54000000 0x800000>;
+		interrupts = <3>;
+		ti,hwmods = "debugss";
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		iva: iva {
+			compatible = "ti,iva2.2";
+			ti,hwmods = "iva";
+
+			dsp {
+				compatible = "ti,omap3-c64";
+			};
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp@68000000 {
+		compatible = "ti,omap3-l3-smx", "simple-bus";
+		reg = <0x68000000 0x10000>;
+		interrupts = <9 10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		l4_core: l4@48000000 {
+			compatible = "ti,omap3-l4-core", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x1000000>;
+
+			scm: scm@2000 {
+				compatible = "ti,omap3-scm", "simple-bus";
+				reg = <0x2000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				omap3_pmx_core: pinmux@30 {
+					compatible = "ti,omap3-padconf",
+						     "pinctrl-single";
+					reg = <0x30 0x238>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0xff1f>;
+				};
+
+				scm_conf: scm_conf@270 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x270 0x330>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x270 0x330>;
+
+					pbias_regulator: pbias_regulator@2b0 {
+						compatible = "ti,pbias-omap3", "ti,pbias-omap";
+						reg = <0x2b0 0x4>;
+						syscon = <&scm_conf>;
+						pbias_mmc_reg: pbias_mmc_omap2430 {
+							regulator-name = "pbias_mmc_omap2430";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3000000>;
+						};
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+
+				omap3_pmx_wkup: pinmux@a00 {
+					compatible = "ti,omap3-padconf",
+						     "pinctrl-single";
+					reg = <0xa00 0x5c>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0xff1f>;
+				};
+			};
+		};
+
+		aes: aes@480c5000 {
+			compatible = "ti,omap3-aes";
+			ti,hwmods = "aes";
+			reg = <0x480c5000 0x50>;
+			interrupts = <0>;
+			dmas = <&sdma 65 &sdma 66>;
+			dma-names = "tx", "rx";
+		};
+
+		prm: prm@48306000 {
+			compatible = "ti,omap3-prm";
+			reg = <0x48306000 0x4000>;
+			interrupts = <11>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm: cm@48004000 {
+			compatible = "ti,omap3-cm";
+			reg = <0x48004000 0x4000>;
+
+			cm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_clockdomains: clockdomains {
+			};
+		};
+
+		counter32k: counter@48320000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48320000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,omap3-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		sdma: dma-controller@48056000 {
+			compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
+			reg = <0x48056000 0x1000>;
+			interrupts = <12>,
+				     <13>,
+				     <14>,
+				     <15>;
+			#dma-cells = <1>;
+			dma-channels = <32>;
+			dma-requests = <96>;
+			ti,hwmods = "dma";
+		};
+
+		gpio1: gpio@48310000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x48310000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@49050000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49050000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@49052000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49052000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@49054000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49054000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@49056000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49056000 0x200>;
+			interrupts = <33>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@49058000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49058000 0x200>;
+			interrupts = <34>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x4806a000 0x2000>;
+			interrupts-extended = <&intc 72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x4806c000 0x400>;
+			interrupts-extended = <&intc 73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@49020000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x49020000 0x400>;
+			interrupts-extended = <&intc 74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48070000 0x80>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48072000 0x80>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48060000 0x80>;
+			interrupts = <61>;
+			dmas = <&sdma 25 &sdma 26>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap3-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <2>;
+			ti,mbox-num-fifos = <2>;
+			mbox_dsp: dsp {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>,
+			       <&sdma 16>,
+			       <&sdma 23>,
+			       <&sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x480ba000 0x100>;
+			interrupts = <48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+		};
+
+		hdqw1w: 1w@480b2000 {
+			compatible = "ti,omap3-1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+			ti,hwmods = "hdq1w";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x480ad000 0x200>;
+			interrupts = <94>;
+			ti,hwmods = "mmc3";
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+		};
+
+		mmu_isp: mmu@480bd400 {
+			#iommu-cells = <0>;
+			compatible = "ti,omap2-iommu";
+			reg = <0x480bd400 0x80>;
+			interrupts = <24>;
+			ti,hwmods = "mmu_isp";
+			ti,#tlb-entries = <8>;
+		};
+
+		mmu_iva: mmu@5d000000 {
+			#iommu-cells = <0>;
+			compatible = "ti,omap2-iommu";
+			reg = <0x5d000000 0x80>;
+			interrupts = <28>;
+			ti,hwmods = "mmu_iva";
+			status = "disabled";
+		};
+
+		wdt2: wdt@48314000 {
+			compatible = "ti,omap3-wdt";
+			reg = <0x48314000 0x80>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 31>,
+			       <&sdma 32>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp1_fck>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		mcbsp2: mcbsp@49022000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49022000 0xff>,
+			      <0x49028000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>, /* RX interrupt */
+				     <4>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			ti,buffer-size = <1280>;
+			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+			clock-names = "fck", "ick";
+			status = "disabled";
+		};
+
+		mcbsp3: mcbsp@49024000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49024000 0xff>,
+			      <0x4902a000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <22>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>, /* RX interrupt */
+				     <5>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
+			dmas = <&sdma 17>,
+			       <&sdma 18>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+			clock-names = "fck", "ick";
+			status = "disabled";
+		};
+
+		mcbsp4: mcbsp@49026000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49026000 0xff>;
+			reg-names = "mpu";
+			interrupts = <23>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+			dmas = <&sdma 19>,
+			       <&sdma 20>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp4_fck>;
+			clock-names = "fck";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <27>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+			dmas = <&sdma 21>,
+			       <&sdma 22>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp5_fck>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		sham: sham@480c3000 {
+			compatible = "ti,omap3-sham";
+			ti,hwmods = "sham";
+			reg = <0x480c3000 0x64>;
+			interrupts = <49>;
+			dmas = <&sdma 69>;
+			dma-names = "rx";
+		};
+
+		timer1: timer@48318000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48318000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@49032000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49032000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@49034000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49034000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@49036000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49036000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@49038000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49038000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4903a000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903a000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4903c000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903c000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4903e000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903e000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@49040000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49040000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@48304000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48304000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
+
+		usbhstll: usbhstll@48062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x48062000 0x1000>;
+			interrupts = <78>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@48064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x48064000 0x400>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbhsohci: ohci@48064400 {
+				compatible = "ti,ohci-omap3";
+				reg = <0x48064400 0x400>;
+				interrupts = <76>;
+				remote-wakeup-connected;
+			};
+
+			usbhsehci: ehci@48064800 {
+				compatible = "ti,ehci-omap";
+				reg = <0x48064800 0x400>;
+				interrupts = <77>;
+			};
+		};
+
+		gpmc: gpmc@6e000000 {
+			compatible = "ti,omap3430-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x6e000000 0x02d0>;
+			interrupts = <20>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb_otg_hs: usb_otg_hs@480ab000 {
+			compatible = "ti,omap3-musb";
+			reg = <0x480ab000 0x1000>;
+			interrupts = <92>, <93>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x48050000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss1_alwon_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss1_alwon_fck>;
+				clock-names = "fck";
+			};
+
+			dsi: encoder@4804fc00 {
+				compatible = "ti,omap3-dsi";
+				reg = <0x4804fc00 0x200>,
+				      <0x4804fe00 0x40>,
+				      <0x4804ff00 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <25>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x48050800 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss1_alwon_fck>, <&dss_ick>;
+				clock-names = "fck", "ick";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap3-venc";
+				reg = <0x48050c00 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+				clocks = <&dss_tv_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		ssi: ssi-controller@48058000 {
+			compatible = "ti,omap3-ssi";
+			ti,hwmods = "ssi";
+
+			status = "disabled";
+
+			reg = <0x48058000 0x1000>,
+			      <0x48059000 0x1000>;
+			reg-names = "sys",
+				    "gdd";
+
+			interrupts = <71>;
+			interrupt-names = "gdd_mpu";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ssi_port1: ssi-port@4805a000 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805a000 0x800>,
+				      <0x4805a800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupts = <67>,
+					     <68>;
+			};
+
+			ssi_port2: ssi-port@4805b000 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805b000 0x800>,
+				      <0x4805b800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupts = <69>,
+					     <70>;
+			};
+		};
+	};
+};
+
+/include/ "omap3xxx-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/omap34xx-omap36xx-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap34xx-omap36xx-clocks.dtsi
new file mode 100644
index 000000000..858aa0796
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap34xx-omap36xx-clocks.dtsi
@@ -0,0 +1,268 @@
+/*
+ * Device Tree Source for OMAP34XX/OMAP36XX clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	security_l4_ick2: security_l4_ick2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes1_ick: aes1_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		ti,bit-shift = <3>;
+		reg = <0x0a14>;
+	};
+
+	rng_ick: rng_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <2>;
+	};
+
+	sha11_ick: sha11_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <1>;
+	};
+
+	des1_ick: des1_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <0>;
+	};
+
+	cam_mclk: cam_mclk@f00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0f00>;
+		ti,set-rate-parent;
+	};
+
+	cam_ick: cam_ick@f10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0f10>;
+		ti,bit-shift = <0>;
+	};
+
+	csi2_96m_fck: csi2_96m_fck@f00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0f00>;
+		ti,bit-shift = <1>;
+	};
+
+	security_l3_ick: security_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pka_ick: pka_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l3_ick>;
+		reg = <0x0a14>;
+		ti,bit-shift = <4>;
+	};
+
+	icr_ick: icr_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <29>;
+	};
+
+	des2_ick: des2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <26>;
+	};
+
+	mspro_ick: mspro_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	mailboxes_ick: mailboxes_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <7>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sr1_fck: sr1_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <6>;
+	};
+
+	sr2_fck: sr2_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <7>;
+	};
+
+	sr_l4_ick: sr_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll2_fck: dpll2_fck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0040>;
+		ti,index-starts-at-one;
+	};
+
+	dpll2_ck: dpll2_ck@4 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
+		ti,low-power-stop;
+		ti,lock;
+		ti,low-power-bypass;
+	};
+
+	dpll2_m2_ck: dpll2_m2_ck@44 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0044>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_ck: iva2_ck@0 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll2_m2_ck>;
+		reg = <0x0000>;
+		ti,bit-shift = <0>;
+	};
+
+	modem_fck: modem_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <31>;
+	};
+
+	sad2d_ick: sad2d_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <3>;
+	};
+
+	mad2d_ick: mad2d_ick@a18 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <3>;
+	};
+
+	mspro_fck: mspro_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+};
+
+&cm_clockdomains {
+	cam_clkdm: cam_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_ick>, <&csi2_96m_fck>;
+	};
+
+	iva2_clkdm: iva2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva2_ck>;
+	};
+
+	dpll2_clkdm: dpll2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll2_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
+			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
+			 <&mspro_fck>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap34xx.dtsi b/roms/u-boot/arch/arm/dts/omap34xx.dtsi
new file mode 100644
index 000000000..ac4f8795b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap34xx.dtsi
@@ -0,0 +1,84 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP35xx SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/media/omap3-isp.h>
+
+#include "omap3.dtsi"
+
+/ {
+	cpus {
+		cpu: cpu@0 {
+			/* OMAP343x/OMAP35xx variants OPP1-5 */
+			operating-points = <
+				/* kHz    uV */
+				125000   975000
+				250000  1075000
+				500000  1200000
+				550000  1270000
+				600000  1350000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	ocp@68000000 {
+		omap3_pmx_core2: pinmux@480025d8 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025d8 0x24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		isp: isp@480bc000 {
+			compatible = "ti,omap3-isp";
+			reg = <0x480bc000 0x12fc
+			       0x480bd800 0x017c>;
+			interrupts = <24>;
+			iommus = <&mmu_isp>;
+			syscon = <&scm_conf 0x6c>;
+			ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
+			#clock-cells = <1>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		bandgap: bandgap@48002524 {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap34xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "omap3-cpu-thermal.dtsi"
+	};
+};
+
+&ssi {
+	status = "ok";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 000000000..15d186690
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,242 @@
+/*
+ * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	corex2_d3_fck: corex2_d3_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	corex2_d5_fck: corex2_d5_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+};
+&cm_clocks {
+	dpll5_ck: dpll5_ck@d04 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
+		ti,low-power-stop;
+		ti,lock;
+	};
+
+	dpll5_m2_ck: dpll5_m2_ck@d50 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll5_ck>;
+		ti,max-div = <31>;
+		reg = <0x0d50>;
+		ti,index-starts-at-one;
+	};
+
+	sgx_gate_fck: sgx_gate_fck@b00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0b00>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	omap_192m_alwon_fck: omap_192m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	sgx_mux_fck: sgx_mux_fck@b40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
+		reg = <0x0b40>;
+	};
+
+	sgx_fck: sgx_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
+	};
+
+	sgx_ick: sgx_ick@b10 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	cpefuse_fck: cpefuse_fck@a08 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <0>;
+	};
+
+	ts_fck: ts_fck@a08 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_32k_fck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <1>;
+	};
+
+	usbtll_fck: usbtll_fck@a08 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <2>;
+	};
+
+	usbtll_ick: usbtll_ick@a18 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <2>;
+	};
+
+	mmchs3_ick: mmchs3_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <30>;
+	};
+
+	mmchs3_fck: mmchs3_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <30>;
+	};
+
+	dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick: dss_ick_3430es2@e10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_120m_fck: usbhost_120m_fck@1400 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x1400>;
+		ti,bit-shift = <1>;
+	};
+
+	usbhost_48m_fck: usbhost_48m_fck@1400 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&omap_48m_fck>;
+		reg = <0x1400>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_ick: usbhost_ick@1410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x1410>;
+		ti,bit-shift = <0>;
+	};
+};
+
+&cm_clockdomains {
+	dpll5_clkdm: dpll5_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll5_ck>;
+	};
+
+	sgx_clkdm: sgx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sgx_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck>, <&dss_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
+	};
+
+	usbhost_clkdm: usbhost_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
+			 <&usbhost_ick>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap36xx-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap36xx-clocks.dtsi
new file mode 100644
index 000000000..a21d1f021
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap36xx-clocks.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	dpll4_ck: dpll4_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-j-type-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-rate-parent;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	uart4_fck: uart4_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <18>;
+	};
+};
+
+&dpll4_m2x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m3x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m4x2_mul_ck {
+	ti,clock-mult = <1>;
+};
+
+&dpll4_m5x2_mul_ck {
+	ti,clock-mult = <1>;
+};
+
+&dpll4_m6x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&cm_clockdomains {
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&uart4_fck>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap36xx-omap3430es2plus-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap36xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 000000000..1a4fbdf0d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,198 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
+	};
+
+	ssi_sst_fck: ssi_sst_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-hsotgusb-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick: ssi_ick_3430es2@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usim_gate_fck: usim_gate_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&omap_96m_fck>;
+		ti,bit-shift = <9>;
+		reg = <0x0c00>;
+	};
+
+	sys_d2_ck: sys_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d2_fck: omap_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d4_fck: omap_96m_d4_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	omap_96m_d8_fck: omap_96m_d8_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	omap_96m_d10_fck: omap_96m_d10_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <20>;
+	};
+
+	usim_mux_fck: usim_mux_fck@c40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	usim_fck: usim_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
+	};
+
+	usim_ick: usim_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <9>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&usim_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&ssi_ick>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap36xx.dtsi b/roms/u-boot/arch/arm/dts/omap36xx.dtsi
new file mode 100644
index 000000000..6fb23ada1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap36xx.dtsi
@@ -0,0 +1,169 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/media/omap3-isp.h>
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	cpus {
+		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+		cpu: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				300000  1012500
+				600000  1200000
+				800000  1325000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	ocp@68000000 {
+		uart4: serial@49042000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x49042000 0x400>;
+			interrupts = <80>;
+			dmas = <&sdma 81 &sdma 82>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		abb_mpu_iva: regulator-abb-mpu {
+			compatible = "ti,abb-v1";
+			regulator-name = "abb_mpu_iva";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+			reg-names = "base-address", "int-address";
+			ti,tranxdone-status-mask = <0x4000000>;
+			clocks = <&sys_ck>;
+			ti,settling-time = <30>;
+			ti,clock-cycles = <8>;
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1012500		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1325000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			>;
+		};
+
+		omap3_pmx_core2: pinmux@480025a0 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025a0 0x5c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		isp: isp@480bc000 {
+			compatible = "ti,omap3-isp";
+			reg = <0x480bc000 0x12fc
+			       0x480bd800 0x0600>;
+			interrupts = <24>;
+			iommus = <&mmu_isp>;
+			syscon = <&scm_conf 0x2f0>;
+			ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+			#clock-cells = <1>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		bandgap: bandgap@48002524 {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap36xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
+
+		target-module@480cb000 {
+			compatible = "ti,sysc-omap3630-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x480cb038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&sr2_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480cb000 0x001000>;
+
+			smartreflex_core: smartreflex@0 {
+				compatible = "ti,omap3-smartreflex-core";
+				reg = <0 0x400>;
+				interrupts = <19>;
+			};
+		};
+
+		target-module@480c9000 {
+			compatible = "ti,sysc-omap3630-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_mpu_iva";
+			reg = <0x480c9038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&sr1_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480c9000 0x001000>;
+
+
+			smartreflex_mpu_iva: smartreflex@480c9000 {
+				compatible = "ti,omap3-smartreflex-mpu-iva";
+				reg = <0 0x400>;
+				interrupts = <18>;
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "omap3-cpu-thermal.dtsi"
+	};
+};
+
+/* OMAP3630 needs dss_96m_fck for VENC */
+&venc {
+	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
+	clock-names = "fck", "tv_dac_clk";
+};
+
+&ssi {
+	status = "ok";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/omap3xxx-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap3xxx-clocks.dtsi
new file mode 100644
index 000000000..9bd91641a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap3xxx-clocks.dtsi
@@ -0,0 +1,1665 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	virt_16_8m_ck: virt_16_8m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	osc_sys_ck: osc_sys_ck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
+		reg = <0x0d40>;
+	};
+
+	sys_ck: sys_ck@1270 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_sys_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1270>;
+		ti,index-starts-at-one;
+	};
+
+	sys_clkout1: sys_clkout1@d70 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&osc_sys_ck>;
+		reg = <0x0d70>;
+		ti,bit-shift = <7>;
+	};
+
+	dpll3_x2_ck: dpll3_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m2x2_ck: dpll3_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_x2_ck: dpll4_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	corex2_fck: corex2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkup_l4_ick: wkup_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+
+&scm_clocks {
+	mcbsp5_mux_fck: mcbsp5_mux_fck@68 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x68>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+
+	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x04>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x04>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+
+	mcbsp3_mux_fck: mcbsp3_mux_fck@68 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		reg = <0x68>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck@68 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x68>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+};
+&cm_clocks {
+	dummy_apb_pclk: dummy_apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	omap_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_38_4m_ck: virt_38_4m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	dpll4_ck: dpll4_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m2_ck: dpll4_m2_ck@d48 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0d48>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_96m_alwon_fck: omap_96m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll3_ck: dpll3_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
+	};
+
+	dpll3_m3_ck: dpll3_m3_ck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <31>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_core_alwon_ck: emu_core_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sys_altclk: sys_altclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll3_m2_ck: dpll3_m2_ck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <31>;
+		reg = <0x0d40>;
+		ti,index-starts-at-one;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll1_fck: dpll1_fck@940 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0940>;
+		ti,index-starts-at-one;
+	};
+
+	dpll1_ck: dpll1_ck@904 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll1_fck>;
+		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
+	};
+
+	dpll1_x2_ck: dpll1_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll1_x2m2_ck: dpll1_x2m2_ck@944 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll1_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0944>;
+		ti,index-starts-at-one;
+	};
+
+	cm_96m_fck: cm_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	omap_96m_fck: omap_96m_fck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0d40>;
+	};
+
+	dpll4_m3_ck: dpll4_m3_ck@e40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_54m_fck: omap_54m_fck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0d40>;
+	};
+
+	cm_96m_d2_fck: cm_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cm_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_48m_fck: omap_48m_fck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+		ti,bit-shift = <3>;
+		reg = <0x0d40>;
+	};
+
+	omap_12m_fck: omap_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll4_m4_ck: dpll4_m4_ck@e40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll4_m4_ck>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m4x2_ck: dpll4_m4x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_mul_ck>;
+		ti,bit-shift = <0x1d>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m5_ck: dpll4_m5_ck@f40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0f40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll4_m5_ck>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m6_ck: dpll4_m6_ck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <63>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_per_alwon_ck: emu_per_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	clkout2_src_gate_ck: clkout2_src_gate_ck@d70 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_mux_ck: clkout2_src_mux_ck@d70 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_ck: clkout2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
+	};
+
+	sys_clkout2: sys_clkout2@d70 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout2_src_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0d70>;
+		ti,index-power-of-two;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_x2m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	arm_fck: arm_fck@924 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mpu_ck>;
+		reg = <0x0924>;
+		ti,max-div = <2>;
+	};
+
+	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_ick: l3_ick@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	l4_ick: l4_ick@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,bit-shift = <2>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	rm_ick: rm_ick@c40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <1>;
+		ti,max-div = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0a00>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0a40>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0a00>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0a40>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	core_96m_fck: core_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_fck: mmchs2_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_fck: mmchs1_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <24>;
+	};
+
+	i2c3_fck: i2c3_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_fck: i2c2_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_fck: i2c1_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <15>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <10>;
+		reg = <0x0a00>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <9>;
+		reg = <0x0a00>;
+	};
+
+	core_48m_fck: core_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcspi4_fck: mcspi4_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_fck: mcspi3_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_fck: mcspi2_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_fck: mcspi1_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <18>;
+	};
+
+	uart2_fck: uart2_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_fck: uart1_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <13>;
+	};
+
+	core_12m_fck: core_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_12m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdq_fck: hdq_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_12m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <22>;
+	};
+
+	core_l3_ick: core_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdrc_ick: sdrc_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_l4_ick: core_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_ick: mmchs2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_ick: mmchs1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <24>;
+	};
+
+	hdq_ick: hdq_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <22>;
+	};
+
+	mcspi4_ick: mcspi4_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_ick: mcspi3_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_ick: mcspi2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_ick: mcspi1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <18>;
+	};
+
+	i2c3_ick: i2c3_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_ick: i2c2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_ick: i2c1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <15>;
+	};
+
+	uart2_ick: uart2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_ick: uart1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <13>;
+	};
+
+	gpt11_ick: gpt11_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <12>;
+	};
+
+	gpt10_ick: gpt10_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <11>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <10>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <9>;
+	};
+
+	omapctrl_ick: omapctrl_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <6>;
+	};
+
+	dss_tv_fck: dss_tv_fck@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_54m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss_96m_fck: dss_96m_fck@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_96m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss2_alwon_fck: dss2_alwon_fck@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <1>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c00>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck@c40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x0c40>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	aes2_ick: aes2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		ti,bit-shift = <28>;
+		reg = <0x0a10>;
+	};
+
+	wkup_32k_fck: wkup_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbck: gpio1_dbck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <3>;
+	};
+
+	sha12_ick: sha12_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <27>;
+	};
+
+	wdt2_fck: wdt2_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt2_ick: wdt2_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt1_ick: wdt1_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <4>;
+	};
+
+	gpio1_ick: gpio1_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <3>;
+	};
+
+	omap_32ksync_ick: omap_32ksync_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <2>;
+	};
+
+	gpt12_ick: gpt12_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpt1_ick: gpt1_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <0>;
+	};
+
+	per_96m_fck: per_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_48m_fck: per_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	uart3_fck: uart3_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <11>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1000>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x1040>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1000>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1040>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1000>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1040>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1000>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1040>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1000>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1040>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1000>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1040>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x1000>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1040>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1000>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1040>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	per_32k_alwon_fck: per_32k_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_dbck: gpio6_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_dbck: gpio5_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_dbck: gpio4_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_dbck: gpio3_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_dbck: gpio2_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_fck: wdt3_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <12>;
+	};
+
+	per_l4_ick: per_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_ick: gpio6_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_ick: gpio5_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_ick: gpio4_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_ick: gpio3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_ick: gpio2_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_ick: wdt3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <12>;
+	};
+
+	uart3_ick: uart3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <11>;
+	};
+
+	uart4_ick: uart4_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <18>;
+	};
+
+	gpt9_ick: gpt9_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <10>;
+	};
+
+	gpt8_ick: gpt8_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <9>;
+	};
+
+	gpt7_ick: gpt7_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <8>;
+	};
+
+	gpt6_ick: gpt6_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <7>;
+	};
+
+	gpt5_ick: gpt5_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <6>;
+	};
+
+	gpt4_ick: gpt4_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <5>;
+	};
+
+	gpt3_ick: gpt3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <4>;
+	};
+
+	gpt2_ick: gpt2_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <3>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <0>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <1>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <2>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <0>;
+		reg = <0x1000>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <1>;
+		reg = <0x1000>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x1000>;
+	};
+
+	emu_src_mux_ck: emu_src_mux_ck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		reg = <0x1140>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	pclk_fck: pclk_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	pclkx2_fck: pclkx2_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	atclk_fck: atclk_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	traceclk_src_fck: traceclk_src_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1140>;
+	};
+
+	traceclk_fck: traceclk_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&traceclk_src_fck>;
+		ti,bit-shift = <11>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	secure_32k_fck: secure_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+
+	dpll3_clkdm: dpll3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll3_ck>;
+	};
+
+	dpll1_clkdm: dpll1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll1_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>;
+	};
+
+	emu_clkdm: emu_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&emu_src_ck>;
+	};
+
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-cpu-thermal.dtsi b/roms/u-boot/arch/arm/dts/omap4-cpu-thermal.dtsi
new file mode 100644
index 000000000..ab7f87ae9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-cpu-thermal.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Device Tree Source for OMAP4/5 SoC CPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+        thermal-sensors = <&bandgap     0>;
+
+	cpu_trips: trips {
+                cpu_alert0: cpu_alert {
+                        temperature = <100000>; /* millicelsius */
+                        hysteresis = <2000>; /* millicelsius */
+                        type = "passive";
+                };
+                cpu_crit: cpu_crit {
+                        temperature = <125000>; /* millicelsius */
+                        hysteresis = <2000>; /* millicelsius */
+                        type = "critical";
+                };
+        };
+
+	cpu_cooling_maps: cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-l4-abe.dtsi b/roms/u-boot/arch/arm/dts/omap4-l4-abe.dtsi
new file mode 100644
index 000000000..67b71ff54
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-l4-abe.dtsi
@@ -0,0 +1,488 @@
+&l4_abe {						/* 0x40100000 */
+	compatible = "ti,omap4-l4-abe", "simple-bus";
+	reg = <0x40100000 0x400>,
+	      <0x40100400 0x400>;
+	reg-names = "la", "ap";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x40100000 0x100000>,	/* segment 0 */
+		 <0x49000000 0x49000000 0x100000>;
+	segment@0 {					/* 0x40100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges =
+			 /* CPU to L4 ABE mapping */
+			 <0x00000000 0x00000000 0x000400>,	/* ap 0 */
+			 <0x00000400 0x00000400 0x000400>,	/* ap 1 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 2 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 3 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 4 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 5 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 6 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 7 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 8 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 9 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 10 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 11 */
+			 <0x0002e000 0x0002e000 0x001000>,	/* ap 12 */
+			 <0x0002f000 0x0002f000 0x001000>,	/* ap 13 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 14 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 15 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 16 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 17 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 18 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 19 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 20 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 21 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 22 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 23 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 24 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 25 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 26 */
+			 <0x00080000 0x00080000 0x001000>,	/* ap 27 */
+			 <0x000a0000 0x000a0000 0x010000>,	/* ap 28 */
+			 <0x000a0000 0x000a0000 0x001000>,	/* ap 29 */
+			 <0x000c0000 0x000c0000 0x010000>,	/* ap 30 */
+			 <0x000c0000 0x000c0000 0x001000>,	/* ap 31 */
+			 <0x000f1000 0x000f1000 0x001000>,	/* ap 32 */
+			 <0x000f2000 0x000f2000 0x001000>,	/* ap 33 */
+
+			 /* L3 to L4 ABE mapping */
+			 <0x49000000 0x49000000 0x000400>,	/* ap 0 */
+			 <0x49000400 0x49000400 0x000400>,	/* ap 1 */
+			 <0x49022000 0x49022000 0x001000>,	/* ap 2 */
+			 <0x49023000 0x49023000 0x001000>,	/* ap 3 */
+			 <0x49024000 0x49024000 0x001000>,	/* ap 4 */
+			 <0x49025000 0x49025000 0x001000>,	/* ap 5 */
+			 <0x49026000 0x49026000 0x001000>,	/* ap 6 */
+			 <0x49027000 0x49027000 0x001000>,	/* ap 7 */
+			 <0x49028000 0x49028000 0x001000>,	/* ap 8 */
+			 <0x49029000 0x49029000 0x001000>,	/* ap 9 */
+			 <0x4902a000 0x4902a000 0x001000>,	/* ap 10 */
+			 <0x4902b000 0x4902b000 0x001000>,	/* ap 11 */
+			 <0x4902e000 0x4902e000 0x001000>,	/* ap 12 */
+			 <0x4902f000 0x4902f000 0x001000>,	/* ap 13 */
+			 <0x49030000 0x49030000 0x001000>,	/* ap 14 */
+			 <0x49031000 0x49031000 0x001000>,	/* ap 15 */
+			 <0x49032000 0x49032000 0x001000>,	/* ap 16 */
+			 <0x49033000 0x49033000 0x001000>,	/* ap 17 */
+			 <0x49038000 0x49038000 0x001000>,	/* ap 18 */
+			 <0x49039000 0x49039000 0x001000>,	/* ap 19 */
+			 <0x4903a000 0x4903a000 0x001000>,	/* ap 20 */
+			 <0x4903b000 0x4903b000 0x001000>,	/* ap 21 */
+			 <0x4903c000 0x4903c000 0x001000>,	/* ap 22 */
+			 <0x4903d000 0x4903d000 0x001000>,	/* ap 23 */
+			 <0x4903e000 0x4903e000 0x001000>,	/* ap 24 */
+			 <0x4903f000 0x4903f000 0x001000>,	/* ap 25 */
+			 <0x49080000 0x49080000 0x010000>,	/* ap 26 */
+			 <0x49080000 0x49080000 0x001000>,	/* ap 27 */
+			 <0x490a0000 0x490a0000 0x010000>,	/* ap 28 */
+			 <0x490a0000 0x490a0000 0x001000>,	/* ap 29 */
+			 <0x490c0000 0x490c0000 0x010000>,	/* ap 30 */
+			 <0x490c0000 0x490c0000 0x001000>,	/* ap 31 */
+			 <0x490f1000 0x490f1000 0x001000>,	/* ap 32 */
+			 <0x490f2000 0x490f2000 0x001000>;	/* ap 33 */
+
+		target-module@22000 {			/* 0x40122000, ap 2 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2208c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>,
+				 <0x49022000 0x49022000 0x1000>;
+
+			mcbsp1: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49022000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 33>,
+				       <&sdma 34>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@24000 {			/* 0x40124000, ap 4 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2408c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>,
+				 <0x49024000 0x49024000 0x1000>;
+
+			mcbsp2: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49024000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 17>,
+				       <&sdma 18>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@26000 {			/* 0x40126000, ap 6 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2608c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>,
+				 <0x49026000 0x49026000 0x1000>;
+
+			mcbsp3: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49026000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 19>,
+				       <&sdma 20>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@28000 {			/* 0x40128000, ap 8 08.0 */
+			compatible = "ti,sysc-mcasp", "ti,sysc";
+			reg = <0x28000 0x4>,
+			      <0x28004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>,
+				 <0x49028000 0x49028000 0x1000>;
+
+			/*
+			 * Child device unsupported by davinci-mcasp. At least
+			 * RX path is disabled for omap4, and only DIT mode
+			 * works with no I2S. See also old Android kernel
+			 * omap-mcasp driver for more information.
+			 */
+		};
+
+		target-module@2a000 {			/* 0x4012a000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>,
+				 <0x4902a000 0x4902a000 0x1000>;
+		};
+
+		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2e000 0x4>,
+			      <0x2e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_DMIC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2e000 0x1000>,
+				 <0x4902e000 0x4902e000 0x1000>;
+
+			dmic: dmic@0 {
+				compatible = "ti,omap4-dmic";
+				reg = <0x0 0x7f>, /* MPU private access */
+				      <0x4902e000 0x7f>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 67>;
+				dma-names = "up_link";
+				status = "disabled";
+			};
+		};
+
+		target-module@30000 {			/* 0x40130000, ap 14 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x30000 0x4>,
+			      <0x30010 0x4>,
+			      <0x30014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>,
+				 <0x49030000 0x49030000 0x1000>;
+
+			wdt3: wdt@0 {
+				compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCPDM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>,
+				 <0x49032000 0x49032000 0x1000>;
+
+			/* Must be only enabled for boards with pdmclk wired */
+			status = "disabled";
+
+			mcpdm: mcpdm@0 {
+				compatible = "ti,omap4-mcpdm";
+				reg = <0x0 0x7f>, /* MPU private access */
+				      <0x49032000 0x7f>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 65>,
+				       <&sdma 66>;
+				dma-names = "up_link", "dn_link";
+			};
+		};
+
+		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>,
+				 <0x49038000 0x49038000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x00000000 0x80>,
+				      <0x49038000 0x80>;
+				clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3a000 0x4>,
+			      <0x3a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>,
+				 <0x4903a000 0x4903a000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x00000000 0x80>,
+				      <0x4903a000 0x80>;
+				clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>,
+				 <0x4903c000 0x4903c000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x00000000 0x80>,
+				      <0x4903c000 0x80>;
+				clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>,
+				 <0x4903e000 0x4903e000 0x1000>;
+
+			timer8: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x00000000 0x80>,
+				      <0x4903e000 0x80>;
+				clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@80000 {			/* 0x40180000, ap 26 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>,
+				 <0x49080000 0x49080000 0x10000>;
+		};
+
+		target-module@a0000 {			/* 0x401a0000, ap 28 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x10000>,
+				 <0x490a0000 0x490a0000 0x10000>;
+		};
+
+		target-module@c0000 {			/* 0x401c0000, ap 30 1e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000 0x10000>,
+				 <0x490c0000 0x490c0000 0x10000>;
+		};
+
+		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf1000 0x4>,
+			      <0xf1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf1000 0x1000>,
+				 <0x490f1000 0x490f1000 0x1000>;
+
+			/*
+			 * No child device binding or driver in mainline.
+			 * See Android tree and related upstreaming efforts
+			 * for the old driver.
+			 */
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-l4.dtsi b/roms/u-boot/arch/arm/dts/omap4-l4.dtsi
new file mode 100644
index 000000000..424a69466
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-l4.dtsi
@@ -0,0 +1,2473 @@
+// SPDX-License-Identifier: GPL-2.0
+&l4_cfg {						/* 0x4a000000 */
+	compatible = "ti,omap4-l4-cfg", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x080000>,	/* segment 0 */
+		 <0x00080000 0x4a080000 0x080000>,	/* segment 1 */
+		 <0x00100000 0x4a100000 0x080000>,	/* segment 2 */
+		 <0x00180000 0x4a180000 0x080000>,	/* segment 3 */
+		 <0x00200000 0x4a200000 0x080000>,	/* segment 4 */
+		 <0x00280000 0x4a280000 0x080000>,	/* segment 5 */
+		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 3 */
+			 <0x00003000 0x00003000 0x001000>,	/* ap 4 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 5 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 6 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 7 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 8 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 9 */
+			 <0x00058000 0x00058000 0x004000>,	/* ap 10 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 11 */
+			 <0x00063000 0x00063000 0x001000>,	/* ap 12 */
+			 <0x00008000 0x00008000 0x002000>,	/* ap 23 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 24 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 25 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 26 */
+			 <0x0005e000 0x0005e000 0x002000>,	/* ap 80 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 81 */
+			 <0x00064000 0x00064000 0x001000>,	/* ap 86 */
+			 <0x00065000 0x00065000 0x001000>;	/* ap 87 */
+
+		target-module@2000 {			/* 0x4a002000, ap 3 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_core";
+			reg = <0x2000 0x4>,
+			      <0x2010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			omap4_scm_core: scm@0 {
+				compatible = "ti,omap4-scm-core", "simple-bus";
+				reg = <0x0 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+				};
+
+				omap_control_usb2phy: control-phy@300 {
+					compatible = "ti,control-phy-usb2";
+					reg = <0x300 0x4>;
+					reg-names = "power";
+				};
+
+				omap_control_usbotg: control-phy@33c {
+					compatible = "ti,control-phy-otghs";
+					reg = <0x33c 0x4>;
+					reg-names = "otghs_control";
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x4a004000, ap 5 02.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			cm1: cm1@0 {
+				compatible = "ti,omap4-cm1", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				cm1_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm1_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x4a008000, ap 23 32.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x2000>;
+
+			cm2: cm2@0 {
+				compatible = "ti,omap4-cm2", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				cm2_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm2_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@56000 {			/* 0x4a056000, ap 7 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x56000 0x4>,
+			      <0x5602c 0x4>,
+			      <0x56028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */
+			clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <127>;
+			};
+		};
+
+		target-module@58000 {			/* 0x4a058000, ap 10 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000 0x4>,
+			      <0x58010 0x4>,
+			      <0x58014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58000 0x5000>;
+
+			hsi: hsi@0 {
+				compatible = "ti,omap4-hsi";
+				reg = <0x0 0x4000>,
+				      <0x5000 0x1000>;
+				reg-names = "sys", "gdd";
+
+				clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+				clock-names = "hsi_fck";
+
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gdd_mpu";
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x4000>;
+
+				hsi_port1: hsi-port@2000 {
+					compatible = "ti,omap4-hsi-port";
+					reg = <0x2000 0x800>,
+					      <0x2800 0x800>;
+					reg-names = "tx", "rx";
+					interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				hsi_port2: hsi-port@3000 {
+					compatible = "ti,omap4-hsi-port";
+					reg = <0x3000 0x800>,
+					      <0x3800 0x800>;
+					reg-names = "tx", "rx";
+					interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		target-module@5e000 {			/* 0x4a05e000, ap 80 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x2000>;
+		};
+
+		target-module@62000 {			/* 0x4a062000, ap 11 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "usb_tll_hs";
+			reg = <0x62000 0x4>,
+			      <0x62010 0x4>,
+			      <0x62014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x62000 0x1000>;
+
+			usbhstll: usbhstll@0 {
+				compatible = "ti,usbhs-tll";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@64000 {			/* 0x4a064000, ap 86 1e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "usb_host_hs";
+			reg = <0x64000 0x4>,
+			      <0x64010 0x4>,
+			      <0x64014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x1000>;
+
+			usbhshost: usbhshost@0 {
+				compatible = "ti,usbhs-host";
+				reg = <0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				clocks = <&init_60m_fclk>,
+					 <&xclk60mhsp1_ck>,
+					 <&xclk60mhsp2_ck>;
+				clock-names = "refclk_60m_int",
+					      "refclk_60m_ext_p1",
+					      "refclk_60m_ext_p2";
+
+				usbhsohci: ohci@800 {
+					compatible = "ti,ohci-omap3";
+					reg = <0x800 0x400>;
+					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+					remote-wakeup-connected;
+				};
+
+				usbhsehci: ehci@c00 {
+					compatible = "ti,ehci-omap";
+					reg = <0xc00 0x400>;
+					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		target-module@66000 {			/* 0x4a066000, ap 25 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x66000 0x4>,
+			      <0x66010 0x4>,
+			      <0x66014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
+			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_tesla 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
+		};
+	};
+
+	segment@80000 {					/* 0x4a080000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
+			 <0x0005a000 0x000da000 0x001000>,	/* ap 14 */
+			 <0x0005b000 0x000db000 0x001000>,	/* ap 15 */
+			 <0x0005c000 0x000dc000 0x001000>,	/* ap 16 */
+			 <0x0005d000 0x000dd000 0x001000>,	/* ap 17 */
+			 <0x0005e000 0x000de000 0x001000>,	/* ap 18 */
+			 <0x00060000 0x000e0000 0x001000>,	/* ap 19 */
+			 <0x00061000 0x000e1000 0x001000>,	/* ap 20 */
+			 <0x00074000 0x000f4000 0x001000>,	/* ap 27 */
+			 <0x00075000 0x000f5000 0x001000>,	/* ap 28 */
+			 <0x00076000 0x000f6000 0x001000>,	/* ap 29 */
+			 <0x00077000 0x000f7000 0x001000>,	/* ap 30 */
+			 <0x00036000 0x000b6000 0x001000>,	/* ap 69 */
+			 <0x00037000 0x000b7000 0x001000>,	/* ap 70 */
+			 <0x0004d000 0x000cd000 0x001000>,	/* ap 78 */
+			 <0x0004e000 0x000ce000 0x001000>,	/* ap 79 */
+			 <0x00029000 0x000a9000 0x001000>,	/* ap 82 */
+			 <0x0002a000 0x000aa000 0x001000>,	/* ap 83 */
+			 <0x0002b000 0x000ab000 0x001000>,	/* ap 84 */
+			 <0x0002c000 0x000ac000 0x001000>,	/* ap 85 */
+			 <0x0002d000 0x000ad000 0x001000>,	/* ap 88 */
+			 <0x0002e000 0x000ae000 0x001000>;	/* ap 89 */
+
+		target-module@29000 {			/* 0x4a0a9000, ap 82 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x29000 0x1000>;
+		};
+
+		target-module@2b000 {			/* 0x4a0ab000, ap 84 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2b400 0x4>,
+			      <0x2b404 0x4>,
+			      <0x2b408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2b000 0x1000>;
+
+			usb_otg_hs: usb_otg_hs@0 {
+				compatible = "ti,omap4-musb";
+				reg = <0x0 0x7ff>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mc", "dma";
+				usb-phy = <&usb2_phy>;
+				phys = <&usb2_phy>;
+				phy-names = "usb2-phy";
+				multipoint = <1>;
+				num-eps = <16>;
+				ram-bits = <12>;
+				ctrl-module = <&omap_control_usbotg>;
+			};
+		};
+
+		target-module@2d000 {			/* 0x4a0ad000, ap 88 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2d000 0x4>,
+			      <0x2d010 0x4>,
+			      <0x2d014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2d000 0x1000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				reg = <0x0 0x1f>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				usb2_phy: usb2phy@80 {
+					compatible = "ti,omap-usb2";
+					reg = <0x80 0x58>;
+					ctrl-module = <&omap_control_usb2phy>;
+					clocks = <&usb_phy_cm_clk32k>;
+					clock-names = "wkupclk";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		/* d2d mdm */
+		target-module@36000 {			/* 0x4a0b6000, ap 69 60.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>,
+			      <0x36014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
+			clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		/* d2d mpu */
+		target-module@4d000 {			/* 0x4a0cd000, ap 78 58.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4d000 0x4>,
+			      <0x4d010 0x4>,
+			      <0x4d014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
+			clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000 0x1000>;
+		};
+
+		target-module@59000 {			/* 0x4a0d9000, ap 13 1a.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0x59038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			smartreflex_mpu: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-mpu";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4a0db000, ap 15 08.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0x5b038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			smartreflex_iva: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-iva";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4a0dd000, ap 17 22.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0x5d038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			smartreflex_core: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-core";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@60000 {			/* 0x4a0e0000, ap 19 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+		};
+
+		target-module@74000 {			/* 0x4a0f4000, ap 27 24.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x74000 0x4>,
+			      <0x74010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x74000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <3>;
+				ti,mbox-num-fifos = <8>;
+				mbox_ipu: mbox_ipu {
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <1 0 0>;
+				};
+				mbox_dsp: mbox_dsp {
+					ti,mbox-tx = <3 0 0>;
+					ti,mbox-rx = <2 0 0>;
+				};
+			};
+		};
+
+		target-module@76000 {			/* 0x4a0f6000, ap 29 3a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x76000 0x4>,
+			      <0x76010 0x4>,
+			      <0x76014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x76000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x4a100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00100000 0x001000>,	/* ap 21 */
+			 <0x00001000 0x00101000 0x001000>,	/* ap 22 */
+			 <0x00002000 0x00102000 0x001000>,	/* ap 61 */
+			 <0x00003000 0x00103000 0x001000>,	/* ap 62 */
+			 <0x00008000 0x00108000 0x001000>,	/* ap 63 */
+			 <0x00009000 0x00109000 0x001000>,	/* ap 64 */
+			 <0x0000a000 0x0010a000 0x001000>,	/* ap 65 */
+			 <0x0000b000 0x0010b000 0x001000>;	/* ap 66 */
+
+		target-module@0 {			/* 0x4a100000, ap 21 2a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_pad_core";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			omap4_pmx_core: pinmux@40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <0x40 0x0196>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap4_padconf_global: omap4_padconf_global@5a0 {
+				compatible = "syscon",
+					     "simple-bus";
+				reg = <0x5a0 0x170>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x5a0 0x170>;
+
+				pbias_regulator: pbias_regulator@60 {
+					compatible = "ti,pbias-omap4", "ti,pbias-omap";
+					reg = <0x60 0x4>;
+					syscon = <&omap4_padconf_global>;
+					pbias_mmc_reg: pbias_mmc_omap4 {
+						regulator-name = "pbias_mmc_omap4";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3000000>;
+					};
+				};
+			};
+		};
+
+		target-module@2000 {			/* 0x4a102000, ap 61 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a108000, ap 63 62.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a10a000, ap 65 50.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>,
+			      <0xa010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-delay-us = <2>;
+			/* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */
+			clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			/* No child device binding or driver in mainline */
+		};
+	};
+
+	segment@180000 {					/* 0x4a180000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@200000 {					/* 0x4a200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 31 */
+			 <0x0001f000 0x0021f000 0x001000>,	/* ap 32 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 33 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 34 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 35 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 36 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 37 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 38 */
+			 <0x00012000 0x00212000 0x001000>,	/* ap 39 */
+			 <0x00013000 0x00213000 0x001000>,	/* ap 40 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 41 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 42 */
+			 <0x00010000 0x00210000 0x001000>,	/* ap 43 */
+			 <0x00011000 0x00211000 0x001000>,	/* ap 44 */
+			 <0x00016000 0x00216000 0x001000>,	/* ap 45 */
+			 <0x00017000 0x00217000 0x001000>,	/* ap 46 */
+			 <0x00014000 0x00214000 0x001000>,	/* ap 47 */
+			 <0x00015000 0x00215000 0x001000>,	/* ap 48 */
+			 <0x00018000 0x00218000 0x001000>,	/* ap 49 */
+			 <0x00019000 0x00219000 0x001000>,	/* ap 50 */
+			 <0x00020000 0x00220000 0x001000>,	/* ap 51 */
+			 <0x00021000 0x00221000 0x001000>,	/* ap 52 */
+			 <0x00026000 0x00226000 0x001000>,	/* ap 53 */
+			 <0x00027000 0x00227000 0x001000>,	/* ap 54 */
+			 <0x00028000 0x00228000 0x001000>,	/* ap 55 */
+			 <0x00029000 0x00229000 0x001000>,	/* ap 56 */
+			 <0x0002a000 0x0022a000 0x001000>,	/* ap 57 */
+			 <0x0002b000 0x0022b000 0x001000>,	/* ap 58 */
+			 <0x0001c000 0x0021c000 0x001000>,	/* ap 59 */
+			 <0x0001d000 0x0021d000 0x001000>;	/* ap 60 */
+
+		target-module@4000 {			/* 0x4a204000, ap 35 42.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4a206000, ap 37 4a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a20a000, ap 33 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4a20c000, ap 41 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x4a210000, ap 43 52.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@12000 {			/* 0x4a212000, ap 39 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x4a214000, ap 47 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x4a216000, ap 45 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x4a218000, ap 49 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4a21c000, ap 59 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4a21e000, ap 31 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x4a220000, ap 51 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x4a226000, ap 53 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@28000 {			/* 0x4a228000, ap 55 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4a22a000, ap 57 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+		};
+	};
+
+	segment@280000 {					/* 0x4a280000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	l4_cfg_segment_300000: segment@300000 {			/* 0x4a300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
+			 <0x00040000 0x00340000 0x001000>,	/* ap 68 */
+			 <0x00020000 0x00320000 0x004000>,	/* ap 71 */
+			 <0x00024000 0x00324000 0x002000>,	/* ap 72 */
+			 <0x00026000 0x00326000 0x001000>,	/* ap 73 */
+			 <0x00027000 0x00327000 0x001000>,	/* ap 74 */
+			 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
+			 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
+			 <0x00030000 0x00330000 0x010000>,	/* ap 77 */
+			 <0x0002a000 0x0032a000 0x002000>,	/* ap 90 */
+			 <0x0002c000 0x0032c000 0x004000>;	/* ap 91 */
+
+		l4_cfg_target_0: target-module@0 {	/* 0x4a300000, ap 67 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x00020000>,
+				 <0x00020000 0x00020000 0x00004000>,
+				 <0x00024000 0x00024000 0x00002000>,
+				 <0x00026000 0x00026000 0x00001000>,
+				 <0x00027000 0x00027000 0x00001000>,
+				 <0x00028000 0x00028000 0x00001000>,
+				 <0x00029000 0x00029000 0x00001000>,
+				 <0x0002a000 0x0002a000 0x00002000>,
+				 <0x0002c000 0x0002c000 0x00004000>,
+				 <0x00030000 0x00030000 0x00010000>;
+		};
+	};
+};
+
+&l4_wkup {						/* 0x4a300000 */
+	compatible = "ti,omap4-l4-wkup", "simple-bus";
+	reg = <0x4a300000 0x800>,
+	      <0x4a300800 0x800>,
+	      <0x4a301000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a300000 0x010000>,	/* segment 0 */
+		 <0x00010000 0x4a310000 0x010000>,	/* segment 1 */
+		 <0x00020000 0x4a320000 0x010000>;	/* segment 2 */
+
+	segment@0 {					/* 0x4a300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 15 */
+			 <0x0000b000 0x0000b000 0x001000>,	/* ap 16 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 17 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0000d000 0x001000>;	/* ap 20 */
+
+		target-module@4000 {			/* 0x4a304000, ap 17 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "counter_32k";
+			reg = <0x4000 0x4>,
+			      <0x4004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x0 0x20>;
+			};
+		};
+
+		target-module@6000 {			/* 0x4a306000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x2000>;
+
+			prm: prm@0 {
+				compatible = "ti,omap4-prm", "simple-bus";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				prm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@a000 {			/* 0x4a30a000, ap 15 34.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			scrm: scrm@0 {
+				compatible = "ti,omap4-scrm";
+				reg = <0x0 0x2000>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				scrm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@c000 {			/* 0x4a30c000, ap 19 2c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_wkup";
+			reg = <0xc000 0x4>,
+			      <0xc010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			omap4_scm_wkup: scm@c000 {
+				compatible = "ti,omap4-scm-wkup";
+				reg = <0xc000 0x1000>;
+			};
+		};
+	};
+
+	segment@10000 {					/* 0x4a310000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
+			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
+			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
+			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
+			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
+			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
+			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
+			 <0x0000d000 0x0001d000 0x001000>,	/* ap 12 */
+			 <0x0000e000 0x0001e000 0x001000>,	/* ap 21 */
+			 <0x0000f000 0x0001f000 0x001000>;	/* ap 22 */
+
+		gpio1_target: target-module@0 {			/* 0x4a310000, ap 5 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>,
+				 <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				ti,gpio-always-on;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@4000 {			/* 0x4a314000, ap 7 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>,
+			      <0x4014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@8000 {			/* 0x4a318000, ap 9 1c.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			ti,hwmods = "timer1";
+			reg = <0x8000 0x4>,
+			      <0x8010 0x4>,
+			      <0x8014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+			};
+		};
+
+		target-module@c000 {			/* 0x4a31c000, ap 11 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xc000 0x4>,
+			      <0xc010 0x4>,
+			      <0xc014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			keypad: keypad@0 {
+				compatible = "ti,omap4-keypad";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				reg-names = "mpu";
+			};
+		};
+
+		target-module@e000 {			/* 0x4a31e000, ap 21 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_pad_wkup";
+			reg = <0xe000 0x4>,
+			      <0xe010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+
+			omap4_pmx_wkup: pinmux@40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <0x40 0x0038>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+		};
+	};
+
+	segment@20000 {					/* 0x4a320000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x00000000 0x00020000 0x001000>,	/* ap 23 */
+			 <0x00001000 0x00021000 0x001000>,	/* ap 24 */
+			 <0x00002000 0x00022000 0x001000>,	/* ap 25 */
+			 <0x00003000 0x00023000 0x001000>,	/* ap 26 */
+			 <0x00004000 0x00024000 0x001000>,	/* ap 27 */
+			 <0x00005000 0x00025000 0x001000>,	/* ap 28 */
+			 <0x00007000 0x00027000 0x000400>,	/* ap 29 */
+			 <0x00008000 0x00028000 0x000800>,	/* ap 30 */
+			 <0x00009000 0x00029000 0x000400>;	/* ap 31 */
+
+		target-module@0 {			/* 0x4a320000, ap 23 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+		};
+
+		target-module@2000 {			/* 0x4a322000, ap 25 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@4000 {			/* 0x4a324000, ap 27 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4a326000, ap 13 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00006000 0x00001000>,
+				 <0x00001000 0x00007000 0x00000400>,
+				 <0x00002000 0x00008000 0x00000800>,
+				 <0x00003000 0x00009000 0x00000400>;
+		};
+	};
+};
+
+&l4_per {						/* 0x48000000 */
+	compatible = "ti,omap4-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
+		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
+			 <0x00040000 0x00040000 0x010000>,	/* ap 13 */
+			 <0x00050000 0x00050000 0x001000>,	/* ap 14 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 15 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 16 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 17 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 18 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 19 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 20 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 21 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 22 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 23 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 24 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 25 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 26 */
+			 <0x0006b000 0x0006b000 0x001000>,	/* ap 27 */
+			 <0x0006c000 0x0006c000 0x001000>,	/* ap 28 */
+			 <0x0006d000 0x0006d000 0x001000>,	/* ap 29 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 30 */
+			 <0x0006f000 0x0006f000 0x001000>,	/* ap 31 */
+			 <0x00070000 0x00070000 0x001000>,	/* ap 32 */
+			 <0x00071000 0x00071000 0x001000>,	/* ap 33 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 34 */
+			 <0x00073000 0x00073000 0x001000>,	/* ap 35 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 36 */
+			 <0x00096000 0x00096000 0x001000>,	/* ap 37 */
+			 <0x00097000 0x00097000 0x001000>,	/* ap 38 */
+			 <0x00076000 0x00076000 0x001000>,	/* ap 39 */
+			 <0x00077000 0x00077000 0x001000>,	/* ap 40 */
+			 <0x00078000 0x00078000 0x001000>,	/* ap 41 */
+			 <0x00079000 0x00079000 0x001000>,	/* ap 42 */
+			 <0x00086000 0x00086000 0x001000>,	/* ap 43 */
+			 <0x00087000 0x00087000 0x001000>,	/* ap 44 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 45 */
+			 <0x00089000 0x00089000 0x001000>,	/* ap 46 */
+			 <0x000b0000 0x000b0000 0x001000>,	/* ap 47 */
+			 <0x000b1000 0x000b1000 0x001000>,	/* ap 48 */
+			 <0x00098000 0x00098000 0x001000>,	/* ap 49 */
+			 <0x00099000 0x00099000 0x001000>,	/* ap 50 */
+			 <0x0009a000 0x0009a000 0x001000>,	/* ap 51 */
+			 <0x0009b000 0x0009b000 0x001000>,	/* ap 52 */
+			 <0x0009c000 0x0009c000 0x001000>,	/* ap 53 */
+			 <0x0009d000 0x0009d000 0x001000>,	/* ap 54 */
+			 <0x0009e000 0x0009e000 0x001000>,	/* ap 55 */
+			 <0x0009f000 0x0009f000 0x001000>,	/* ap 56 */
+			 <0x00090000 0x00090000 0x002000>,	/* ap 57 */
+			 <0x00092000 0x00092000 0x001000>,	/* ap 58 */
+			 <0x000a4000 0x000a4000 0x001000>,	/* ap 59 */
+			 <0x000a6000 0x000a6000 0x001000>,	/* ap 60 */
+			 <0x000a8000 0x000a8000 0x004000>,	/* ap 61 */
+			 <0x000ac000 0x000ac000 0x001000>,	/* ap 62 */
+			 <0x000ad000 0x000ad000 0x001000>,	/* ap 63 */
+			 <0x000ae000 0x000ae000 0x001000>,	/* ap 64 */
+			 <0x000b2000 0x000b2000 0x001000>,	/* ap 65 */
+			 <0x000b3000 0x000b3000 0x001000>,	/* ap 66 */
+			 <0x000b4000 0x000b4000 0x001000>,	/* ap 67 */
+			 <0x000b5000 0x000b5000 0x001000>,	/* ap 68 */
+			 <0x000b8000 0x000b8000 0x001000>,	/* ap 69 */
+			 <0x000b9000 0x000b9000 0x001000>,	/* ap 70 */
+			 <0x000ba000 0x000ba000 0x001000>,	/* ap 71 */
+			 <0x000bb000 0x000bb000 0x001000>,	/* ap 72 */
+			 <0x000d1000 0x000d1000 0x001000>,	/* ap 73 */
+			 <0x000d2000 0x000d2000 0x001000>,	/* ap 74 */
+			 <0x000d5000 0x000d5000 0x001000>,	/* ap 75 */
+			 <0x000d6000 0x000d6000 0x001000>,	/* ap 76 */
+			 <0x000a2000 0x000a2000 0x001000>,	/* ap 79 */
+			 <0x000a3000 0x000a3000 0x001000>,	/* ap 80 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 81 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 82 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 83 */
+			 <0x000a5000 0x000a5000 0x001000>;	/* ap 84 */
+
+		target-module@20000 {			/* 0x48020000, ap 3 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@32000 {			/* 0x48032000, ap 5 02.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>,
+			      <0x32014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@34000 {			/* 0x48034000, ap 7 04.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x34000 0x4>,
+			      <0x34010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@36000 {			/* 0x48036000, ap 9 0e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4803e000, ap 11 08.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		/* Unused DSS L4 access, see L3 instead */
+		target-module@40000 {			/* 0x48040000, ap 13 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x10000>;
+		};
+
+		target-module@55000 {			/* 0x48055000, ap 15 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55000 0x4>,
+			      <0x55010 0x4>,
+			      <0x55114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@57000 {			/* 0x48057000, ap 17 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x57000 0x4>,
+			      <0x57010 0x4>,
+			      <0x57114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@59000 {			/* 0x48059000, ap 19 10.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x59000 0x4>,
+			      <0x59010 0x4>,
+			      <0x59114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4805b000, ap 21 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5b000 0x4>,
+			      <0x5b010 0x4>,
+			      <0x5b114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4805d000, ap 23 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5d000 0x4>,
+			      <0x5d010 0x4>,
+			      <0x5d114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			gpio6: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 25 1e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x60000 0x8>,
+			      <0x60010 0x8>,
+			      <0x60090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			i2c3: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@6a000 {			/* 0x4806a000, ap 26 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6a050 0x4>,
+			      <0x6a054 0x4>,
+			      <0x6a058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6a000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6c000 {			/* 0x4806c000, ap 28 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6c050 0x4>,
+			      <0x6c054 0x4>,
+			      <0x6c058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6e000 {			/* 0x4806e000, ap 30 1c.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6e050 0x4>,
+			      <0x6e054 0x4>,
+			      <0x6e058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6e000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@70000 {			/* 0x48070000, ap 32 28.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x70000 0x8>,
+			      <0x70010 0x8>,
+			      <0x70090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@72000 {			/* 0x48072000, ap 34 30.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x72000 0x8>,
+			      <0x72010 0x8>,
+			      <0x72090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x72000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@76000 {			/* 0x48076000, ap 39 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x76000 0x4>,
+			      <0x76010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x76000 0x1000>;
+
+			/* No child device binding or driver in mainline */
+		};
+
+		target-module@78000 {			/* 0x48078000, ap 41 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x78000 0x4>,
+			      <0x78010 0x4>,
+			      <0x78014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x1000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@86000 {			/* 0x48086000, ap 43 24.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x86000 0x4>,
+			      <0x86010 0x4>,
+			      <0x86014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@88000 {			/* 0x48088000, ap 45 2e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x88000 0x4>,
+			      <0x88010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x88000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		rng_target: target-module@90000 {	/* 0x48090000, ap 57 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@96000 {			/* 0x48096000, ap 37 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9608c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x96000 0x1000>;
+
+			mcbsp4: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>; /* L4 Interconnect */
+				reg-names = "mpu";
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 31>,
+				       <&sdma 32>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@98000 {			/* 0x48098000, ap 49 22.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x98000 0x4>,
+			      <0x98010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000 0x1000>;
+
+			mcspi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <4>;
+				dmas = <&sdma 35>,
+				       <&sdma 36>,
+				       <&sdma 37>,
+				       <&sdma 38>,
+				       <&sdma 39>,
+				       <&sdma 40>,
+				       <&sdma 41>,
+				       <&sdma 42>;
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					    "tx2", "rx2", "tx3", "rx3";
+			};
+		};
+
+		target-module@9a000 {			/* 0x4809a000, ap 51 2c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9a000 0x4>,
+			      <0x9a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9a000 0x1000>;
+
+			mcspi2: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 43>,
+				       <&sdma 44>,
+				       <&sdma 45>,
+				       <&sdma 46>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+		};
+
+		target-module@9c000 {			/* 0x4809c000, ap 53 36.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9c000 0x4>,
+			      <0x9c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				ti,dual-volt;
+				ti,needs-special-reset;
+				dmas = <&sdma 61>, <&sdma 62>;
+				dma-names = "tx", "rx";
+				pbias-supply = <&pbias_mmc_reg>;
+			};
+		};
+
+		target-module@9e000 {			/* 0x4809e000, ap 55 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9e000 0x1000>;
+		};
+
+		target-module@a2000 {			/* 0x480a2000, ap 79 3a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x480a4000, ap 59 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x000a4000 0x00001000>,
+				 <0x00001000 0x000a5000 0x00001000>;
+		};
+
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 117>, <&sdma 116>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@a8000 {			/* 0x480a8000, ap 61 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x4000>;
+		};
+
+		target-module@ad000 {			/* 0x480ad000, ap 63 50.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xad000 0x4>,
+			      <0xad010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xad000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 77>, <&sdma 78>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b0000 {			/* 0x480b0000, ap 47 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb0000 0x1000>;
+		};
+
+		target-module@b2000 {			/* 0x480b2000, ap 65 3c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb2000 0x4>,
+			      <0xb2014 0x4>,
+			      <0xb2018 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,syss-mask = <1>;
+			ti,no-reset-on-init;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb2000 0x1000>;
+
+			hdqw1w: 1w@0 {
+				compatible = "ti,omap3-1w";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@b4000 {			/* 0x480b4000, ap 67 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb4000 0x4>,
+			      <0xb4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb4000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 47>, <&sdma 48>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b8000 {			/* 0x480b8000, ap 69 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb8000 0x4>,
+			      <0xb8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb8000 0x1000>;
+
+			mcspi3: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 15>, <&sdma 16>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@ba000 {			/* 0x480ba000, ap 71 32.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xba000 0x4>,
+			      <0xba010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xba000 0x1000>;
+
+			mcspi4: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <1>;
+				dmas = <&sdma 70>, <&sdma 71>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@d1000 {			/* 0x480d1000, ap 73 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd1000 0x4>,
+			      <0xd1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd1000 0x1000>;
+
+			mmc4: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 57>, <&sdma 58>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@d5000 {			/* 0x480d5000, ap 75 4e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd5000 0x4>,
+			      <0xd5010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd5000 0x1000>;
+
+			mmc5: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 59>, <&sdma 60>;
+				dma-names = "tx", "rx";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00150000 0x00350000 0x001000>,	/* ap 77 */
+			 <0x00151000 0x00351000 0x001000>;	/* ap 78 */
+
+		target-module@150000 {			/* 0x48350000, ap 77 4c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x150000 0x8>,
+			      <0x150010 0x8>,
+			      <0x150090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x150000 0x1000>;
+
+			i2c4: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-mcpdm.dtsi b/roms/u-boot/arch/arm/dts/omap4-mcpdm.dtsi
new file mode 100644
index 000000000..915a9b31a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-mcpdm.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common omap4 mcpdm configuration
+ *
+ * Only include this file if your board has pdmclk wired from the
+ * pmic to ABE as mcpdm uses an external clock for the module.
+ */
+
+&omap4_pmx_core {
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+		/* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
+		OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+		/* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */
+		OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+		/* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */
+		OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)
+
+		/* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */
+		OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+		/* 0x4a10010e abe_clks.abe_clks ah26 */
+		OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+};
+
+&mcpdm_module {
+	/*
+	 * McPDM pads must be muxed at the interconnect target module
+	 * level as the module on the SoC needs external clock from
+	 * the PMIC
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-panda-common.dtsi b/roms/u-boot/arch/arm/dts/omap4-panda-common.dtsi
new file mode 100644
index 000000000..55ea8b618
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-panda-common.dtsi
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#include <dt-bindings/input/input.h>
+#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+		ethernet = &ethernet;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&led_wkgpio_pins
+		>;
+
+		heartbeat {
+			label = "pandaboard::status1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "pandaboard::status2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio_keys: gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&button_pins
+		>;
+
+		buttonS2 {
+			label = "button S2";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "PandaBoard";
+
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Ext Spk", "HFL",
+			"Ext Spk", "HFR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		/*
+		 * boot-on is required along with always-on as the
+		 * regulator framework doesn't enable the regulator
+		 * if boot-on is not there.
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
+		#phy-cells = <0>;
+		vcc-supply = <&hsusb1_power>;
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder1 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&dss_dpi_pins
+			&tfp410_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	/*
+	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	led_wkgpio_pins: pinmux_leds_wkpins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* IRQ# = 7 */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* IRQ# = 119 */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in their EEPROM as EDID data.
+	 * The EEPROM is connected as I2C slave device.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x10e>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		/* gpio_53 with gpmc_ncs3 pad as wakeup */
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
+				      <&omap4_pmx_core 0x3a>;
+		interrupt-names = "irq", "wakeup";
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&uart2 {
+	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&uart4 {
+	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART4_RX>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-panda-es.dts b/roms/u-boot/arch/arm/dts/omap4-panda-es.dts
new file mode 100644
index 000000000..9dd307b52
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-panda-es.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap4460.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard-ES";
+	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
+};
+
+/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
+&sound {
+	ti,model = "PandaBoardES";
+
+	/* Audio routing */
+	ti,audio-routing =
+		"Headset Stereophone", "HSOL",
+		"Headset Stereophone", "HSOR",
+		"Ext Spk", "HFL",
+		"Ext Spk", "HFR",
+		"Line Out", "AUXL",
+		"Line Out", "AUXR",
+		"AFML", "Line In",
+		"AFMR", "Line In";
+};
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
+
+&omap4_pmx_core {
+	led_gpio_pins: gpio_led_pmx {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+		>;
+	};
+};
+
+&led_wkgpio_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+	>;
+};
+
+&leds {
+	pinctrl-0 = <
+		&led_gpio_pins
+		&led_wkgpio_pins
+	>;
+
+	heartbeat {
+		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+	};
+	mmc {
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio_keys {
+	buttonS2 {
+		gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */
+	};
+};
+
+&gpio1_target {
+	 ti,no-reset-on-init;
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-panda.dts b/roms/u-boot/arch/arm/dts/omap4-panda.dts
new file mode 100644
index 000000000..fb2f47717
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-panda.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard";
+	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-sdp-es23plus.dts b/roms/u-boot/arch/arm/dts/omap4-sdp-es23plus.dts
new file mode 100644
index 000000000..42154520d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-sdp-es23plus.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#include "omap4-sdp.dts"
+
+/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-sdp.dts b/roms/u-boot/arch/arm/dts/omap4-sdp.dts
new file mode 100644
index 000000000..91480ac1f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-sdp.dts
@@ -0,0 +1,713 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+	model = "TI OMAP4 SDP board";
+	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &lcd1;
+		display2 = &hdmi0;
+	};
+
+	vdd_eth: fixedregulator-vdd-eth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&enet_enable_gpio>;
+
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
+		enable-active-high;
+		regulator-boot-on;
+		startup-delay-us = <25000>;
+	};
+
+	vbat: fixedregulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		regulator-min-microvolt = <3750000>;
+		regulator-max-microvolt = <3750000>;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug0 {
+			label = "omap4:green:debug0";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
+		};
+
+		debug1 {
+			label = "omap4:green:debug1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
+		};
+
+		debug2 {
+			label = "omap4:green:debug2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
+		};
+
+		debug3 {
+			label = "omap4:green:debug3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
+		};
+
+		debug4 {
+			label = "omap4:green:debug4";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
+		};
+
+		user1 {
+			label = "omap4:blue:user";
+			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
+		};
+
+		user2 {
+			label = "omap4:red:user";
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
+		};
+
+		user3 {
+			label = "omap4:green:user";
+			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		kpad {
+			label = "omap4::keypad";
+			pwms = <&twl_pwm 0 7812500>;
+			max-brightness = <127>;
+		};
+
+		charging {
+			label = "omap4:green:chrg";
+			pwms = <&twl_pwmled 0 7812500>;
+			max-brightness = <255>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&twl_pwm 1 7812500>;
+		brightness-levels = <
+				0 10 20 30 40
+				50 60 70 80 90
+				100 110 120 127
+				>;
+		default-brightness-level = <13>;
+	};
+
+	sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "SDP4430";
+
+		ti,jack-detection = <1>;
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+		ti,dmic = <&dmic>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Earphone Spk", "EP",
+			"Ext Spk", "HFL",
+			"Ext Spk", "HFR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"Vibrator", "VIBRAL",
+			"Vibrator", "VIBRAR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"MAINMIC", "Main Handset Mic",
+			"Main Handset Mic", "Main Mic Bias",
+			"SUBMIC", "Sub Handset Mic",
+			"Sub Handset Mic", "Main Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In",
+			"DMic", "Digital Mic",
+			"Digital Mic", "Digital Mic1 Bias";
+	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&dss_hdmi_pins
+			&tpd12s015_pins
+	>;
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
+			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
+		>;
+	};
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	dmic_pins: pinmux_dmic_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
+			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
+			OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
+			OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
+			OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	/* gpio_48 for ENET_ENABLE */
+	enet_enable_gpio: pinmux_enet_enable_gpio {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+		>;
+	};
+
+	ks8851_pins: pinmux_ks8851_pins {
+		pinctrl-single,pins = <
+			/* ENET_INT */
+			OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad10.gpio_34 */
+			/*
+			 * Misterious pin which makes the ethernet working
+			 * The legacy board file requested this pin on boot
+			 * (ETH_KS8851_QUART) and set it to high, similarly to
+			 * the ENET_ENABLE pin.
+			 * We could use gpio-hog to keep it high, but let's use
+			 * it as a reset GPIO for ks8851.
+			 */
+			OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.gpio_138 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+
+		/* regulators for vibra motor */
+		vddvibl-supply = <&vbat>;
+		vddvibr-supply = <&vbat>;
+
+		vibra {
+			/* Vibra driver, motor resistance parameters */
+			ti,vibldrv-res = <8>;
+			ti,vibrdrv-res = <3>;
+			ti,viblmotor-res = <10>;
+			ti,vibrmotor-res = <10>;
+		};
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	/*
+	 * Temperature Sensor
+	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+	 */
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+	};
+
+	/*
+	 * Ambient Light Sensor
+	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 */
+	bh1780@29 {
+		compatible = "rohm,bh1780";
+		reg = <0x29>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+
+	/*
+	 * 3-Axis Digital Compass
+	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+	 */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5843";
+		reg = <0x1e>;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	eth@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ks8851_pins>;
+
+		compatible = "ks8851";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
+		vdd-supply = <&vdd_eth>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux1>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1281";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <0x00000012	/* KEY_E */
+			0x00010013	/* KEY_R */
+			0x00020014	/* KEY_T */
+			0x00030066	/* KEY_HOME */
+			0x0004003f	/* KEY_F5 */
+			0x000500f0	/* KEY_UNKNOWN */
+			0x00060017	/* KEY_I */
+			0x0007002a	/* KEY_LEFTSHIFT */
+			0x01000020	/* KEY_D*/
+			0x01010021	/* KEY_F */
+			0x01020022	/* KEY_G */
+			0x010300e7	/* KEY_SEND */
+			0x01040040	/* KEY_F6 */
+			0x010500f0	/* KEY_UNKNOWN */
+			0x01060025	/* KEY_K */
+			0x0107001c	/* KEY_ENTER */
+			0x0200002d	/* KEY_X */
+			0x0201002e	/* KEY_C */
+			0x0202002f	/* KEY_V */
+			0x0203006b	/* KEY_END */
+			0x02040041	/* KEY_F7 */
+			0x020500f0	/* KEY_UNKNOWN */
+			0x02060034	/* KEY_DOT */
+			0x0207003a	/* KEY_CAPSLOCK */
+			0x0300002c	/* KEY_Z */
+			0x0301004e	/* KEY_KPLUS */
+			0x03020030	/* KEY_B */
+			0x0303003b	/* KEY_F1 */
+			0x03040042	/* KEY_F8 */
+			0x030500f0	/* KEY_UNKNOWN */
+			0x03060018	/* KEY_O */
+			0x03070039	/* KEY_SPACE */
+			0x04000011	/* KEY_W */
+			0x04010015	/* KEY_Y */
+			0x04020016	/* KEY_U */
+			0x0403003c	/* KEY_F2 */
+			0x04040073	/* KEY_VOLUMEUP */
+			0x040500f0	/* KEY_UNKNOWN */
+			0x04060026	/* KEY_L */
+			0x04070069	/* KEY_LEFT */
+			0x0500001f	/* KEY_S */
+			0x05010023	/* KEY_H */
+			0x05020024	/* KEY_J */
+			0x0503003d	/* KEY_F3 */
+			0x05040043	/* KEY_F9 */
+			0x05050072	/* KEY_VOLUMEDOWN */
+			0x05060032	/* KEY_M */
+			0x0507006a	/* KEY_RIGHT */
+			0x06000010	/* KEY_Q */
+			0x0601001e	/* KEY_A */
+			0x06020031	/* KEY_N */
+			0x0603009e	/* KEY_BACK */
+			0x0604000e	/* KEY_BACKSPACE */
+			0x060500f0	/* KEY_UNKNOWN */
+			0x06060019	/* KEY_P */
+			0x06070067	/* KEY_UP */
+			0x07000094	/* KEY_PROG1 */
+			0x07010095	/* KEY_PROG2 */
+			0x070200ca	/* KEY_PROG3 */
+			0x070300cb	/* KEY_PROG4 */
+			0x0704003e	/* KEY_F4 */
+			0x070500f0	/* KEY_UNKNOWN */
+			0x07060160	/* KEY_OK */
+			0x0707006c>;	/* KEY_DOWN */
+	linux,input-no-autorepeat;
+};
+
+&uart2 {
+	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART4_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&dmic {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dmic_pins>;
+	status = "okay";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&dss {
+	status = "ok";
+};
+
+&dsi1 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd0";
+
+		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi2_out_ep: endpoint {
+			remote-endpoint = <&lcd1_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd1: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd1";
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
+
+		port {
+			lcd1_in: endpoint {
+				remote-endpoint = <&dsi2_out_ep>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap4-u-boot.dtsi
new file mode 100644
index 000000000..4a6bafd6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4-u-boot.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2020 Tero Kristo <t-kristo@ti.com>
+ */
+
+&l4_cfg {
+	segment@0 {
+		/* SCM Core */
+		target-module@2000 {
+			compatible = "simple-bus";
+		};
+
+		/* USB HS */
+		target-module@64000 {
+			compatible = "simple-bus";
+		};
+	};
+};
+
+&l4_per {
+	segment@0 {
+		/* UART3 */
+		target-module@20000 {
+			compatible = "simple-bus";
+		};
+
+		/* I2C1 */
+		target-module@70000 {
+			compatible = "simple-bus";
+		};
+
+		/* MMC1 */
+		target-module@9c000 {
+			compatible = "simple-bus";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap4.dtsi b/roms/u-boot/arch/arm/dts/omap4.dtsi
new file mode 100644
index 000000000..763bdea8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4.dtsi
@@ -0,0 +1,657 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/omap4.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/clock/omap4.h>
+
+/ {
+	compatible = "ti,omap4430", "ti,omap4";
+	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+	/*
+	 * Note that 4430 needs cross trigger interface (CTI) supported
+	 * before we can configure the interrupts. This means sampling
+	 * events are not supported for pmu. Note that 4460 does not use
+	 * CTI, see also 4460.dtsi.
+	 */
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		ti,hwmods = "debugss";
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+		interrupt-parent = <&gic>;
+	};
+
+	L2: l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	local-timer@48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		clocks = <&mpu_periphclk>;
+		reg = <0x48240600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48281000 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
+		};
+
+		dsp {
+			compatible = "ti,omap3-c64";
+		};
+
+		iva {
+			compatible = "ti,ivahd";
+			ti,hwmods = "iva";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP4 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+		reg = <0x44000000 0x1000>,
+		      <0x44800000 0x2000>,
+		      <0x45000000 0x1000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_wkup: interconnect@4a300000 {
+		};
+
+		l4_cfg: interconnect@4a000000 {
+		};
+
+		l4_per: interconnect@48000000 {
+		};
+
+		l4_abe: interconnect@40100000 {
+		};
+
+		ocmcram: sram@40304000 {
+			compatible = "mmio-sram";
+			reg = <0x40304000 0xa000>; /* 40k */
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,omap4430-gpmc";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			clocks = <&l3_div_ck>;
+			clock-names = "fck";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		target-module@52000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "iss";
+			reg = <0x52000000 0x4>,
+			      <0x52000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-delay-us = <2>;
+			clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x52000000 0x1000000>;
+
+			/* No child device binding, driver in staging */
+		};
+
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
+		};
+
+		target-module@4012c000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4012c000 0x4>,
+			      <0x4012c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
+				 <0x4902c000 0x4902c000 0x1000>; /* L3 */
+
+			/* No child device binding or driver in mainline */
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap4-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
+		emif1: emif@4c000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4c000000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "emif1";
+			ti,no-idle-on-init;
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@4d000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4d000000 0x100>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "emif2";
+			ti,no-idle-on-init;
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		aes1_target: target-module@4b501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b501080 0x4>,
+			      <0x4b501084 0x4>,
+			      <0x4b501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b501000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 111>, <&sdma 110>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		aes2_target: target-module@4b701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b701080 0x4>,
+			      <0x4b701084 0x4>,
+			      <0x4b701088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b701000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 114>, <&sdma 113>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		sham_target: target-module@4b100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b100100 0x4>,
+			      <0x4b100110 0x4>,
+			      <0x4b100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 119>;
+				dma-names = "rx";
+			};
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			ti,tranxdone-status-mask = <0x80>;
+			clocks = <&sys_clkin_ck>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			status = "disabled";
+		};
+
+		abb_iva: regulator-abb-iva {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_iva";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			ti,tranxdone-status-mask = <0x80000000>;
+			clocks = <&sys_clkin_ck>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			status = "disabled";
+		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+
+		/*
+		 * DSS is only using l3 mapping without l4 as noted in the TRM
+		 * "10.1.3 DSS Register Manual" for omap4460.
+		 */
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x58000000 0x1000000>;
+
+			dss: dss@0 {
+				compatible = "ti,omap4-dss";
+				reg = <0 0x80>;
+				status = "disabled";
+				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000000>;
+
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "fck", "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
+						compatible = "ti,omap4-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@2000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x2000 0x4>,
+					      <0x2010 0x4>,
+					      <0x2014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "fck", "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x2000 0x1000>;
+
+					rfbi: encoder@0  {
+						reg = <0 0x1000>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
+						clock-names = "fck", "ick";
+					};
+				};
+
+				target-module@3000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x3000 0x4>;
+					reg-names = "rev";
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x3000 0x1000>;
+
+					venc: encoder@0 {
+						compatible = "ti,omap4-venc";
+						reg = <0 0x1000>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@4000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x4000 0x4>,
+					      <0x4010 0x4>,
+					      <0x4014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x4000 0x1000>;
+
+					dsi1: encoder@0 {
+						compatible = "ti,omap4-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x20>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+							 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+					};
+				};
+
+				target-module@5000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x5000 0x4>,
+					      <0x5010 0x4>,
+					      <0x5014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x5000 0x1000>;
+
+					dsi2: encoder@0 {
+						compatible = "ti,omap4-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x20>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						         <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+					};
+				};
+
+				target-module@6000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x6000 0x4>,
+					      <0x6010 0x4>;
+					reg-names = "rev", "sysc";
+					/*
+					 * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP
+					 * but HDMI audio will fail with them.
+					 */
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x6000 0x2000>;
+
+					hdmi: encoder@0 {
+					compatible = "ti,omap4-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x100>,
+						      <0x300 0x100>,
+						      <0x400 0x1000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+						         <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma 76>;
+						dma-names = "audio_tx";
+					};
+				};
+			};
+		};
+	};
+};
+
+#include "omap4-l4.dtsi"
+#include "omap4-l4-abe.dtsi"
+#include "omap44xx-clocks.dtsi"
+
+&prm {
+	prm_tesla: prm@400 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x400 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_core: prm@700 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x700 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_ivahd: prm@f00 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0xf00 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_device: prm@1b00 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1b00 0x40>;
+		#reset-cells = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap443x-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap443x-clocks.dtsi
new file mode 100644
index 000000000..39297868e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap443x-clocks.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+	bandgap_fclk: bandgap_fclk@1888 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap443x.dtsi b/roms/u-boot/arch/arm/dts/omap443x.dtsi
new file mode 100644
index 000000000..cbcdcb4e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap443x.dtsi
@@ -0,0 +1,76 @@
+/*
+ * Device Tree Source for OMAP443x SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap4.dtsi"
+
+/ {
+	cpus {
+		cpu0: cpu@0 {
+			/* OMAP443x variants OPP50-OPPNT */
+			operating-points = <
+				/* kHz    uV */
+				300000  1025000
+				600000  1200000
+				800000  1313000
+				1008000 1375000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	ocp {
+		bandgap: bandgap@4a002260 {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4>;
+			compatible = "ti,omap4430-bandgap";
+
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	ocp {
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
+			reg-names = "base-address", "int-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		/* Default unused, just provide register info for record */
+		abb_iva: regulator-abb-iva {
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
+			reg-names = "base-address", "int-address";
+		};
+
+	};
+
+};
+
+&cpu_thermal {
+	coefficients = <0 20000>;
+};
+
+/include/ "omap443x-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/omap4460.dtsi b/roms/u-boot/arch/arm/dts/omap4460.dtsi
new file mode 100644
index 000000000..2223dc0d6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap4460.dtsi
@@ -0,0 +1,131 @@
+/*
+ * Device Tree Source for OMAP4460 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#include "omap4.dtsi"
+
+/ {
+	cpus {
+		/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
+		cpu0: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				350000  1025000
+				700000  1200000
+				920000  1313000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "debugss";
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	ocp {
+		bandgap: bandgap@4a002260 {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4
+			       0x4a002378 0x18>;
+			compatible = "ti,omap4460-bandgap";
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
+
+			#thermal-sensor-cells = <0>;
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0x100000 0x40000 0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		abb_iva: regulator-abb-iva {
+			status = "okay";
+
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			950000		0	0	0	0	0
+			1140000		0	0	0	0	0
+			1291000		0	0	0x200000 0	0
+			1375000		1	0	0	0	0
+			1376000		1	0	0	0	0
+			>;
+		};
+	};
+
+};
+
+&cpu_thermal {
+	coefficients = <348 (-9301)>;
+};
+
+/* Only some L4 CFG interconnect ranges are different on 4460 */
+&l4_cfg_segment_300000 {
+	ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
+		 <0x00040000 0x00340000 0x001000>,	/* ap 68 */
+		 <0x00020000 0x00320000 0x004000>,	/* ap 71 */
+		 <0x00024000 0x00324000 0x002000>,	/* ap 72 */
+		 <0x00026000 0x00326000 0x001000>,	/* ap 73 */
+		 <0x00027000 0x00327000 0x001000>,	/* ap 74 */
+		 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
+		 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
+		 <0x00030000 0x00330000 0x010000>,	/* ap 77 */
+		 <0x0002a000 0x0032a000 0x002000>,	/* ap 90 */
+		 <0x0002c000 0x0032c000 0x004000>,	/* ap 91 */
+		 <0x00010000 0x00310000 0x008000>,	/* ap 92 */
+		 <0x00018000 0x00318000 0x004000>,	/* ap 93 */
+		 <0x0001c000 0x0031c000 0x002000>,	/* ap 94 */
+		 <0x0001e000 0x0031e000 0x002000>;	/* ap 95 */
+};
+
+&l4_cfg_target_0 {
+	ranges = <0x00000000 0x00000000 0x00010000>,
+		 <0x00010000 0x00010000 0x00008000>,
+		 <0x00018000 0x00018000 0x00004000>,
+		 <0x0001c000 0x0001c000 0x00002000>,
+		 <0x0001e000 0x0001e000 0x00002000>,
+		 <0x00020000 0x00020000 0x00004000>,
+		 <0x00024000 0x00024000 0x00002000>,
+		 <0x00026000 0x00026000 0x00001000>,
+		 <0x00027000 0x00027000 0x00001000>,
+		 <0x00028000 0x00028000 0x00001000>,
+		 <0x00029000 0x00029000 0x00001000>,
+		 <0x0002a000 0x0002a000 0x00002000>,
+		 <0x0002c000 0x0002c000 0x00004000>,
+		 <0x00030000 0x00030000 0x00010000>;
+};
+
+/include/ "omap446x-clocks.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/omap446x-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap446x-clocks.dtsi
new file mode 100644
index 000000000..0f41714cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap446x-clocks.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+	div_ts_ck: div_ts_ck@1888 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	bandgap_ts_fclk: bandgap_ts_fclk@1888 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&div_ts_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap44xx-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap44xx-clocks.dtsi
new file mode 100644
index 000000000..532868591
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap44xx-clocks.dtsi
@@ -0,0 +1,1324 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm1_clocks {
+	extalt_clkin_ck: extalt_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <59000000>;
+	};
+
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck@108 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	tie_low_clock_ck: tie_low_clock_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60motg_ck: xclk60motg_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck@1e0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+		reg = <0x01f0>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck@120 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ddrphy_ck: ddrphy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	div_core_ck: div_core_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	div_iva_hs_clk: div_iva_hs_clk@1dc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x01dc>;
+		ti,index-power-of-two;
+	};
+
+	div_mpu_hs_clk: div_mpu_hs_clk@19c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_clk_div_ck: dll_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0134>;
+	};
+
+	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
+	};
+
+	dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck@1a0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+		assigned-clocks = <&dpll_iva_ck>;
+		assigned-clock-rates = <931200000>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_iva_m4x2_ck>;
+		assigned-clock-rates = <465600000>;
+	};
+
+	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_iva_m5x2_ck>;
+		assigned-clock-rates = <266100000>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_hs_clk_div_ck: per_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_div_ck: l3_div_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&div_core_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	l4_div_ck: l4_div_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	lp_clk_div_ck: lp_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ocp_abe_iclk: ocp_abe_iclk@528 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	per_abe_24m_fclk: per_abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
+&prm_clocks {
+	sys_clkin_ck: sys_clkin_ck@110 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	dbgclk_mux_ck: dbgclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
+		reg = <0x0108>;
+	};
+
+	syc_clk_div_ck: syc_clk_div_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	usim_ck: usim_ck@1858 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+		ti,dividers = <14>, <18>;
+	};
+
+	usim_fclk: usim_fclk@1858 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usim_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1858>;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>;
+	};
+};
+
+&prm_clockdomains {
+	emu_sys_clkdm: emu_sys_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&trace_clk_div_ck>;
+	};
+};
+
+&cm2_clocks {
+	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+		reg = <0x0150>;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0154>;
+	};
+
+	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
+	};
+
+	dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck@180 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
+		reg = <0x0100>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_24mc_fclk: func_24mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_48m_fclk: func_48m_fclk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <4>, <8>;
+	};
+
+	func_48mc_fclk: func_48mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_64m_fclk: func_64m_fclk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	init_60m_fclk: init_60m_fclk@104 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	per_abe_nc_fclk: per_abe_nc_fclk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		reg = <0x0108>;
+		ti,max-div = <2>;
+	};
+
+	sha2md5_fck: sha2md5_fck@15c8 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15c8>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+};
+
+&cm2_clockdomains {
+	l3_init_clkdm: l3_init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+
+&scrm_clocks {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_ck: auxclk5_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
+	};
+
+	auxclk5_ck: auxclk5_ck@324 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk5_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0324>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck@214 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck@218 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck@21c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	auxclkreq4_ck: auxclkreq4_ck@220 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0220>;
+	};
+
+	auxclkreq5_ck: auxclkreq5_ck@224 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0224>;
+	};
+};
+
+&cm1 {
+	mpuss_cm: mpuss_cm@300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x300 0x100>;
+
+		mpuss_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	tesla_cm: tesla_cm@400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		tesla_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	abe_cm: abe_cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		abe_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x6c>;
+			#clock-cells = <2>;
+		};
+	};
+
+};
+
+&cm2 {
+	l4_ao_cm: l4_ao_cm@600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		l4_ao_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x1c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_1_cm: l3_1_cm@700 {
+		compatible = "ti,omap4-cm";
+		reg = <0x700 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x700 0x100>;
+
+		l3_1_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_2_cm: l3_2_cm@800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x800 0x100>;
+
+		l3_2_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x14>;
+			#clock-cells = <2>;
+		};
+	};
+
+	ducati_cm: ducati_cm@900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		ducati_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_dma_cm: l3_dma_cm@a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		l3_dma_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_emif_cm: l3_emif_cm@b00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xb00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xb00 0x100>;
+
+		l3_emif_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x1c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	d2d_cm: d2d_cm@c00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xc00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xc00 0x100>;
+
+		d2d_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_cfg_cm: l4_cfg_cm@d00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xd00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xd00 0x100>;
+
+		l4_cfg_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x14>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_instr_cm: l3_instr_cm@e00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xe00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe00 0x100>;
+
+		l3_instr_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x24>;
+			#clock-cells = <2>;
+		};
+	};
+
+	ivahd_cm: ivahd_cm@f00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xf00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xf00 0x100>;
+
+		ivahd_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	iss_cm: iss_cm@1000 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x100>;
+
+		iss_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_dss_cm: l3_dss_cm@1100 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1100 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1100 0x100>;
+
+		l3_dss_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_gfx_cm: l3_gfx_cm@1200 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1200 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1200 0x100>;
+
+		l3_gfx_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_init_cm: l3_init_cm@1300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1300 0x100>;
+
+		l3_init_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_per_cm: l4_per_cm@1400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1400 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1400 0x200>;
+
+		l4_per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+			reg = <0x20 0x144>;
+			#clock-cells = <2>;
+		};
+
+		l4_secure_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4-secure", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
+	};
+};
+
+&prm {
+	l4_wkup_cm: l4_wkup_cm@1800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1800 0x100>;
+
+		l4_wkup_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x5c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	emu_sys_cm: emu_sys_cm@1a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1a00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1a00 0x100>;
+
+		emu_sys_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap5-board-common.dtsi b/roms/u-boot/arch/arm/dts/omap5-board-common.dtsi
new file mode 100644
index 000000000..68ac04641
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap5-board-common.dtsi
@@ -0,0 +1,762 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vsys_cobra: fixedregulator-vsys_cobra {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_cobra";
+		vin-supply = <&vmain>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdds_1v8_main: fixedregulator-vdds_1v8_main {
+		compatible = "regulator-fixed";
+		regulator-name = "vdds_1v8_main";
+		vin-supply = <&smps7_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	mmc3_pwrseq: sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clk32kgaudio>;
+		clock-names = "ext_clock";
+	};
+
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsdio_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;	/* gpio140 WLAN_EN */
+		enable-active-high;
+		startup-delay-us = <70000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+		clocks = <&auxclk1_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+		#phy-cells = <0>;
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		/* gpios defined in the board specific dts */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "b";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "omap5-uevm";
+
+		ti,jack-detection;
+		ti,mclk-freq = <19200000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+};
+
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_pins
+			&led_gpio_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
+			OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
+			OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
+			OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
+			OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
+			OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
+			OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
+			OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
+			OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
+			OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
+			OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
+			OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
+			OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
+		>;
+	};
+
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+			OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+		>;
+	};
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+			OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+			OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+		>;
+	};
+
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+			OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+			OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+			OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+		>;
+	};
+};
+
+&omap5_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_wkup_pins
+	>;
+
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+		>;
+	};
+
+	wlcore_irq_pin: pinmux_wlcore_irq_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap5_pmx_core 0x16a>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlcore_irq_pin>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+		ti,mux-pad1 = <0xa1>;
+		ti,mux-pad2 = <0x1b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
+
+		palmas_gpio: gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+			id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		clk32kgaudio: palmas_clk32k@1 {
+			compatible = "ti,palmas-clk32kgaudio";
+			#clock-cells = <0>;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
+		gpadc: gpadc {
+			compatible = "ti,palmas-gpadc";
+			interrupts = <18 0
+				      16 0
+				      17 0>;
+			#io-channel-cells = <1>;
+			ti,channel0-current-microamp = <5>;
+			ti,channel3-current-microamp = <10>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-names = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			smps123-in-supply = <&vsys_cobra>;
+			smps45-in-supply = <&vsys_cobra>;
+			smps6-in-supply = <&vsys_cobra>;
+			smps7-in-supply = <&vsys_cobra>;
+			smps8-in-supply = <&vsys_cobra>;
+			smps9-in-supply = <&vsys_cobra>;
+			smps10_out2-in-supply = <&vsys_cobra>;
+			smps10_out1-in-supply = <&vsys_cobra>;
+			ldo1-in-supply = <&vsys_cobra>;
+			ldo2-in-supply = <&vsys_cobra>;
+			ldo3-in-supply = <&vdds_1v8_main>;
+			ldo4-in-supply = <&vdds_1v8_main>;
+			ldo5-in-supply = <&vsys_cobra>;
+			ldo6-in-supply = <&vdds_1v8_main>;
+			ldo7-in-supply = <&vsys_cobra>;
+			ldo8-in-supply = <&vsys_cobra>;
+			ldo9-in-supply = <&vmmcsd_fixed>;
+			ldoln-in-supply = <&vsys_cobra>;
+			ldousb-in-supply = <&vsys_cobra>;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2100000>;
+					ti,smps-range = <0x80>;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		palmas_power_button: palmas_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&palmas>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>;
+
+		/* audpwron gpio defined in the board specific dts */
+
+		vio-supply = <&smps7_reg>;
+		v2v1-supply = <&smps9_reg>;
+		enable-active-high;
+
+		clocks = <&clk32kgaudio>, <&fref_xtal_ck>;
+		clock-names = "clk32k", "mclk";
+	};
+};
+
+&mcpdm_module {
+	/* Module on the SoC needs external clock from the PMIC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
+&dwc3 {
+	extcon = <&extcon_usb3>;
+	dr_mode = "otg";
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			      <&omap5_pmx_core 0x19c>;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+
+	/* vdda-supply populated in board specific dts file */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap5-core-thermal.dtsi b/roms/u-boot/arch/arm/dts/omap5-core-thermal.dtsi
new file mode 100644
index 000000000..de8a3d456
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap5-core-thermal.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Device Tree Source for OMAP543x SoC CORE thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+core_thermal: core_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     2>;
+
+	trips {
+		core_crit: core_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap5-gpu-thermal.dtsi b/roms/u-boot/arch/arm/dts/omap5-gpu-thermal.dtsi
new file mode 100644
index 000000000..bc3090f2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap5-gpu-thermal.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Device Tree Source for OMAP543x SoC GPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     1>;
+
+	trips {
+		gpu_crit: gpu_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap5-l4-abe.dtsi b/roms/u-boot/arch/arm/dts/omap5-l4-abe.dtsi
new file mode 100644
index 000000000..f73eea0b4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap5-l4-abe.dtsi
@@ -0,0 +1,449 @@
+&l4_abe {						/* 0x40100000 */
+	compatible = "ti,omap5-l4-abe", "simple-bus";
+	reg = <0x40100000 0x400>,
+	      <0x40100400 0x400>;
+	reg-names = "la", "ap";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x40100000 0x100000>,	/* segment 0 */
+		 <0x49000000 0x49000000 0x100000>;
+	segment@0 {					/* 0x40100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges =
+			 /* CPU to L4 ABE mapping */
+			 <0x00000000 0x00000000 0x000400>,	/* ap 0 */
+			 <0x00000400 0x00000400 0x000400>,	/* ap 1 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 2 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 3 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 4 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 5 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 6 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 7 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 8 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 9 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 10 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 11 */
+			 <0x0002e000 0x0002e000 0x001000>,	/* ap 12 */
+			 <0x0002f000 0x0002f000 0x001000>,	/* ap 13 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 14 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 15 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 16 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 17 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 18 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 19 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 20 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 21 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 22 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 23 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 24 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 25 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 26 */
+			 <0x00080000 0x00080000 0x001000>,	/* ap 27 */
+			 <0x000a0000 0x000a0000 0x010000>,	/* ap 28 */
+			 <0x000a0000 0x000a0000 0x001000>,	/* ap 29 */
+			 <0x000c0000 0x000c0000 0x010000>,	/* ap 30 */
+			 <0x000c0000 0x000c0000 0x001000>,	/* ap 31 */
+			 <0x000f1000 0x000f1000 0x001000>,	/* ap 32 */
+			 <0x000f2000 0x000f2000 0x001000>,	/* ap 33 */
+
+			 /* L3 to L4 ABE mapping */
+			 <0x49000000 0x49000000 0x000400>,	/* ap 0 */
+			 <0x49000400 0x49000400 0x000400>,	/* ap 1 */
+			 <0x49022000 0x49022000 0x001000>,	/* ap 2 */
+			 <0x49023000 0x49023000 0x001000>,	/* ap 3 */
+			 <0x49024000 0x49024000 0x001000>,	/* ap 4 */
+			 <0x49025000 0x49025000 0x001000>,	/* ap 5 */
+			 <0x49026000 0x49026000 0x001000>,	/* ap 6 */
+			 <0x49027000 0x49027000 0x001000>,	/* ap 7 */
+			 <0x49028000 0x49028000 0x001000>,	/* ap 8 */
+			 <0x49029000 0x49029000 0x001000>,	/* ap 9 */
+			 <0x4902a000 0x4902a000 0x001000>,	/* ap 10 */
+			 <0x4902b000 0x4902b000 0x001000>,	/* ap 11 */
+			 <0x4902e000 0x4902e000 0x001000>,	/* ap 12 */
+			 <0x4902f000 0x4902f000 0x001000>,	/* ap 13 */
+			 <0x49030000 0x49030000 0x001000>,	/* ap 14 */
+			 <0x49031000 0x49031000 0x001000>,	/* ap 15 */
+			 <0x49032000 0x49032000 0x001000>,	/* ap 16 */
+			 <0x49033000 0x49033000 0x001000>,	/* ap 17 */
+			 <0x49038000 0x49038000 0x001000>,	/* ap 18 */
+			 <0x49039000 0x49039000 0x001000>,	/* ap 19 */
+			 <0x4903a000 0x4903a000 0x001000>,	/* ap 20 */
+			 <0x4903b000 0x4903b000 0x001000>,	/* ap 21 */
+			 <0x4903c000 0x4903c000 0x001000>,	/* ap 22 */
+			 <0x4903d000 0x4903d000 0x001000>,	/* ap 23 */
+			 <0x4903e000 0x4903e000 0x001000>,	/* ap 24 */
+			 <0x4903f000 0x4903f000 0x001000>,	/* ap 25 */
+			 <0x49080000 0x49080000 0x010000>,	/* ap 26 */
+			 <0x49080000 0x49080000 0x001000>,	/* ap 27 */
+			 <0x490a0000 0x490a0000 0x010000>,	/* ap 28 */
+			 <0x490a0000 0x490a0000 0x001000>,	/* ap 29 */
+			 <0x490c0000 0x490c0000 0x010000>,	/* ap 30 */
+			 <0x490c0000 0x490c0000 0x001000>,	/* ap 31 */
+			 <0x490f1000 0x490f1000 0x001000>,	/* ap 32 */
+			 <0x490f2000 0x490f2000 0x001000>;	/* ap 33 */
+
+		target-module@22000 {			/* 0x40122000, ap 2 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2208c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>,
+				 <0x49022000 0x49022000 0x1000>;
+
+			mcbsp1: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49022000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 33>,
+				       <&sdma 34>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@24000 {			/* 0x40124000, ap 4 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2408c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>,
+				 <0x49024000 0x49024000 0x1000>;
+
+			mcbsp2: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49024000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 17>,
+				       <&sdma 18>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@26000 {			/* 0x40126000, ap 6 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2608c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>,
+				 <0x49026000 0x49026000 0x1000>;
+
+			mcbsp3: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49026000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 19>,
+				       <&sdma 20>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@28000 {			/* 0x40128000, ap 8 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>,
+				 <0x49028000 0x49028000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4012a000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>,
+				 <0x4902a000 0x4902a000 0x1000>;
+		};
+
+		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2e000 0x4>,
+			      <0x2e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_DMIC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2e000 0x1000>,
+				 <0x4902e000 0x4902e000 0x1000>;
+
+			dmic: dmic@0 {
+				compatible = "ti,omap4-dmic";
+				reg = <0x0 0x7f>, /* MPU private access */
+				      <0x4902e000 0x7f>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 67>;
+				dma-names = "up_link";
+				status = "disabled";
+			};
+		};
+
+		target-module@30000 {			/* 0x40130000, ap 14 0e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>,
+				 <0x49030000 0x49030000 0x1000>;
+		};
+
+		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_MCPDM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>,
+				 <0x49032000 0x49032000 0x1000>;
+
+			/* Must be only enabled for boards with pdmclk wired */
+			status = "disabled";
+
+			mcpdm: mcpdm@0 {
+				compatible = "ti,omap4-mcpdm";
+				reg = <0x0 0x7f>, /* MPU private access */
+				      <0x49032000 0x7f>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 65>,
+				       <&sdma 66>;
+				dma-names = "up_link", "dn_link";
+			};
+		};
+
+		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>,
+				 <0x49038000 0x49038000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>,
+				      <0x49038000 0x80>;
+				clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3a000 0x4>,
+			      <0x3a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>,
+				 <0x4903a000 0x4903a000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>,
+				      <0x4903a000 0x80>;
+				clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>,
+				 <0x4903c000 0x4903c000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>,
+				      <0x4903c000 0x80>;
+				clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>,
+				 <0x4903e000 0x4903e000 0x1000>;
+
+			timer8: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>,
+				      <0x4903e000 0x80>;
+				clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@80000 {			/* 0x40180000, ap 26 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>,
+				 <0x49080000 0x49080000 0x10000>;
+		};
+
+		target-module@a0000 {			/* 0x401a0000, ap 28 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x10000>,
+				 <0x490a0000 0x490a0000 0x10000>;
+		};
+
+		target-module@c0000 {			/* 0x401c0000, ap 30 1e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000 0x10000>,
+				 <0x490c0000 0x490c0000 0x10000>;
+		};
+
+		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf1000 0x4>,
+			      <0xf1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf1000 0x1000>,
+				 <0x490f1000 0x490f1000 0x1000>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap5-l4.dtsi b/roms/u-boot/arch/arm/dts/omap5-l4.dtsi
new file mode 100644
index 000000000..8582016d6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap5-l4.dtsi
@@ -0,0 +1,2437 @@
+&l4_cfg {						/* 0x4a000000 */
+	compatible = "ti,omap5-l4-cfg", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x080000>,	/* segment 0 */
+		 <0x00080000 0x4a080000 0x080000>,	/* segment 1 */
+		 <0x00100000 0x4a100000 0x080000>,	/* segment 2 */
+		 <0x00180000 0x4a180000 0x080000>,	/* segment 3 */
+		 <0x00200000 0x4a200000 0x080000>,	/* segment 4 */
+		 <0x00280000 0x4a280000 0x080000>,	/* segment 5 */
+		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 3 */
+			 <0x00003000 0x00003000 0x001000>,	/* ap 4 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 5 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 6 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 7 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 8 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 9 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 10 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 11 */
+			 <0x00063000 0x00063000 0x001000>,	/* ap 12 */
+			 <0x00008000 0x00008000 0x002000>,	/* ap 21 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 22 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 23 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 24 */
+			 <0x0005e000 0x0005e000 0x002000>,	/* ap 69 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 70 */
+			 <0x00064000 0x00064000 0x001000>,	/* ap 71 */
+			 <0x00065000 0x00065000 0x001000>,	/* ap 72 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 77 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 78 */
+			 <0x00070000 0x00070000 0x004000>,	/* ap 79 */
+			 <0x00074000 0x00074000 0x001000>,	/* ap 80 */
+			 <0x00075000 0x00075000 0x001000>,	/* ap 81 */
+			 <0x00076000 0x00076000 0x001000>,	/* ap 82 */
+			 <0x00020000 0x00020000 0x020000>,	/* ap 109 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 110 */
+			 <0x00059000 0x00059000 0x001000>;	/* ap 111 */
+
+		target-module@2000 {			/* 0x4a002000, ap 3 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			scm_core: scm@0 {
+				compatible = "ti,omap5-scm-core", "simple-bus";
+				reg = <0x0 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x800>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+				};
+			};
+
+			scm_padconf_core: scm@800 {
+				compatible = "ti,omap5-scm-padconf-core",
+					     "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x800 0x800>;
+
+				omap5_pmx_core: pinmux@40 {
+					compatible = "ti,omap5-padconf",
+						     "pinctrl-single";
+					reg = <0x40 0x01b6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0x7fff>;
+				};
+
+				omap5_padconf_global: omap5_padconf_global@5a0 {
+					compatible = "syscon",
+						     "simple-bus";
+					reg = <0x5a0 0xec>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x5a0 0xec>;
+
+					pbias_regulator: pbias_regulator@60 {
+						compatible = "ti,pbias-omap5", "ti,pbias-omap";
+						reg = <0x60 0x4>;
+						syscon = <&omap5_padconf_global>;
+						pbias_mmc_reg: pbias_mmc_omap5 {
+							regulator-name = "pbias_mmc_omap5";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+						};
+					};
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x4a004000, ap 5 5c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			cm_core_aon: cm_core_aon@0 {
+				compatible = "ti,omap5-cm-core-aon",
+					     "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+
+				cm_core_aon_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_aon_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x4a008000, ap 21 4c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x2000>;
+
+			cm_core: cm_core@0 {
+				compatible = "ti,omap5-cm-core", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				cm_core_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@20000 {			/* 0x4a020000, ap 109 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "usb_otg_ss";
+			reg = <0x20000 0x4>,
+			      <0x20010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x20000>;
+
+			usb3: omap_dwc3@0 {
+				compatible = "ti,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges = <0 0 0x20000>;
+				dwc3: dwc3@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x10000>;
+					interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy>, <&usb3_phy>;
+					phy-names = "usb2-phy", "usb3-phy";
+					dr_mode = "peripheral";
+				};
+			};
+		};
+
+		target-module@56000 {			/* 0x4a056000, ap 7 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x56000 0x4>,
+			      <0x5602c 0x4>,
+			      <0x56028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, dma_clkdm */
+			clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <127>;
+			};
+		};
+
+		target-module@58000 {			/* 0x4a058000, ap 10 06.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00058000 0x00001000>,
+				 <0x00001000 0x00059000 0x00001000>,
+				 <0x00002000 0x0005a000 0x00001000>,
+				 <0x00003000 0x0005b000 0x00001000>;
+		};
+
+		target-module@5e000 {			/* 0x4a05e000, ap 69 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x2000>;
+		};
+
+		target-module@62000 {			/* 0x4a062000, ap 11 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "usb_tll_hs";
+			reg = <0x62000 0x4>,
+			      <0x62010 0x4>,
+			      <0x62014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x62000 0x1000>;
+
+			usbhstll: usbhstll@0 {
+				compatible = "ti,usbhs-tll";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@64000 {			/* 0x4a064000, ap 71 1e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "usb_host_hs";
+			reg = <0x64000 0x4>,
+			      <0x64010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x1000>;
+
+			usbhshost: usbhshost@0 {
+				compatible = "ti,usbhs-host";
+				reg = <0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				clocks = <&l3init_60m_fclk>,
+					 <&xclk60mhsp1_ck>,
+					 <&xclk60mhsp2_ck>;
+				clock-names = "refclk_60m_int",
+					      "refclk_60m_ext_p1",
+					      "refclk_60m_ext_p2";
+
+				usbhsohci: ohci@800 {
+					compatible = "ti,ohci-omap3";
+					reg = <0x800 0x400>;
+					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+					remote-wakeup-connected;
+				};
+
+				usbhsehci: ehci@c00 {
+					compatible = "ti,ehci-omap";
+					reg = <0xc00 0x400>;
+					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		target-module@66000 {			/* 0x4a066000, ap 23 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x66000 0x4>,
+			      <0x66010 0x4>,
+			      <0x66014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
+			clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
+		};
+
+		target-module@70000 {			/* 0x4a070000, ap 79 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x4000>;
+		};
+
+		target-module@75000 {			/* 0x4a075000, ap 81 32.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x75000 0x1000>;
+		};
+	};
+
+	segment@80000 {					/* 0x4a080000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
+			 <0x0005a000 0x000da000 0x001000>,	/* ap 14 */
+			 <0x0005b000 0x000db000 0x001000>,	/* ap 15 */
+			 <0x0005c000 0x000dc000 0x001000>,	/* ap 16 */
+			 <0x0005d000 0x000dd000 0x001000>,	/* ap 17 */
+			 <0x0005e000 0x000de000 0x001000>,	/* ap 18 */
+			 <0x00060000 0x000e0000 0x001000>,	/* ap 19 */
+			 <0x00061000 0x000e1000 0x001000>,	/* ap 20 */
+			 <0x00074000 0x000f4000 0x001000>,	/* ap 25 */
+			 <0x00075000 0x000f5000 0x001000>,	/* ap 26 */
+			 <0x00076000 0x000f6000 0x001000>,	/* ap 27 */
+			 <0x00077000 0x000f7000 0x001000>,	/* ap 28 */
+			 <0x00036000 0x000b6000 0x001000>,	/* ap 65 */
+			 <0x00037000 0x000b7000 0x001000>,	/* ap 66 */
+			 <0x0004d000 0x000cd000 0x001000>,	/* ap 67 */
+			 <0x0004e000 0x000ce000 0x001000>,	/* ap 68 */
+			 <0x00000000 0x00080000 0x004000>,	/* ap 83 */
+			 <0x00004000 0x00084000 0x001000>,	/* ap 84 */
+			 <0x00005000 0x00085000 0x001000>,	/* ap 85 */
+			 <0x00006000 0x00086000 0x001000>,	/* ap 86 */
+			 <0x00007000 0x00087000 0x001000>,	/* ap 87 */
+			 <0x00008000 0x00088000 0x001000>,	/* ap 88 */
+			 <0x00010000 0x00090000 0x004000>,	/* ap 89 */
+			 <0x00014000 0x00094000 0x001000>,	/* ap 90 */
+			 <0x00015000 0x00095000 0x001000>,	/* ap 91 */
+			 <0x00016000 0x00096000 0x001000>,	/* ap 92 */
+			 <0x00017000 0x00097000 0x001000>,	/* ap 93 */
+			 <0x00018000 0x00098000 0x001000>,	/* ap 94 */
+			 <0x00020000 0x000a0000 0x004000>,	/* ap 95 */
+			 <0x00024000 0x000a4000 0x001000>,	/* ap 96 */
+			 <0x00025000 0x000a5000 0x001000>,	/* ap 97 */
+			 <0x00026000 0x000a6000 0x001000>,	/* ap 98 */
+			 <0x00027000 0x000a7000 0x001000>,	/* ap 99 */
+			 <0x00028000 0x000a8000 0x001000>;	/* ap 100 */
+
+		target-module@0 {			/* 0x4a080000, ap 83 28.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x14 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x00004000>,
+				 <0x00004000 0x00004000 0x00001000>,
+				 <0x00005000 0x00005000 0x00001000>,
+				 <0x00006000 0x00006000 0x00001000>,
+				 <0x00007000 0x00007000 0x00001000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0 0x20>;
+			};
+
+			usb2_phy: usb2phy@4000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4000 0x7c>;
+				syscon-phy-power = <&scm_conf 0x300>;
+				clocks = <&usb_phy_cm_clk32k>,
+				<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+			};
+
+			usb3_phy: usb3phy@4400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4400 0x80>,
+				<0x4800 0x64>,
+				<0x4c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				syscon-phy-power = <&scm_conf 0x370>;
+				clocks = <&usb_phy_cm_clk32k>,
+				<&sys_clkin>,
+				<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
+				clock-names =	"wkupclk",
+				"sysclk",
+				"refclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		target-module@10000 {			/* 0x4a090000, ap 89 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x10000 0x4>,
+			      <0x10010 0x4>,
+			      <0x10014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00010000 0x00004000>,
+				 <0x00004000 0x00014000 0x00001000>,
+				 <0x00005000 0x00015000 0x00001000>,
+				 <0x00006000 0x00016000 0x00001000>,
+				 <0x00007000 0x00017000 0x00001000>;
+
+				ocp2scp@0 {
+					compatible = "ti,omap-ocp2scp";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					reg = <0x0 0x20>;
+				};
+
+				sata_phy: phy@6000 {
+					compatible = "ti,phy-pipe3-sata";
+					reg = <0x6000 0x80>, /* phy_rx */
+					      <0x6400 0x64>, /* phy_tx */
+					      <0x6800 0x40>; /* pll_ctrl */
+					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+					syscon-phy-power = <&scm_conf 0x374>;
+					clocks = <&sys_clkin>,
+						 <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+					clock-names = "sysclk", "refclk";
+					#phy-cells = <0>;
+				};
+		};
+
+		target-module@20000 {			/* 0x4a0a0000, ap 95 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00020000 0x00004000>,
+				 <0x00004000 0x00024000 0x00001000>,
+				 <0x00005000 0x00025000 0x00001000>,
+				 <0x00006000 0x00026000 0x00001000>,
+				 <0x00007000 0x00027000 0x00001000>;
+		};
+
+		target-module@36000 {			/* 0x4a0b6000, ap 65 6c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		target-module@4d000 {			/* 0x4a0cd000, ap 67 64.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000 0x1000>;
+		};
+
+		target-module@59000 {			/* 0x4a0d9000, ap 13 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+		};
+
+		target-module@5b000 {			/* 0x4a0db000, ap 15 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+		};
+
+		target-module@5d000 {			/* 0x4a0dd000, ap 17 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+		};
+
+		target-module@60000 {			/* 0x4a0e0000, ap 19 54.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+		};
+
+		target-module@74000 {			/* 0x4a0f4000, ap 25 04.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x74000 0x4>,
+			      <0x74010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x74000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <3>;
+				ti,mbox-num-fifos = <8>;
+				mbox_ipu: mbox_ipu {
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <1 0 0>;
+				};
+				mbox_dsp: mbox_dsp {
+					ti,mbox-tx = <3 0 0>;
+					ti,mbox-rx = <2 0 0>;
+				};
+			};
+		};
+
+		target-module@76000 {			/* 0x4a0f6000, ap 27 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x76000 0x4>,
+			      <0x76010 0x4>,
+			      <0x76014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x76000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x4a100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 59 */
+			 <0x00003000 0x00103000 0x001000>,	/* ap 60 */
+			 <0x00008000 0x00108000 0x001000>,	/* ap 61 */
+			 <0x00009000 0x00109000 0x001000>,	/* ap 62 */
+			 <0x0000a000 0x0010a000 0x001000>,	/* ap 63 */
+			 <0x0000b000 0x0010b000 0x001000>,	/* ap 64 */
+			 <0x00040000 0x00140000 0x010000>,	/* ap 101 */
+			 <0x00050000 0x00150000 0x001000>;	/* ap 102 */
+
+		target-module@2000 {			/* 0x4a102000, ap 59 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a108000, ap 61 26.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a10a000, ap 63 22.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@40000 {			/* 0x4a140000, ap 101 16.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x10000>;
+		};
+	};
+
+	segment@180000 {					/* 0x4a180000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@200000 {					/* 0x4a200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 29 */
+			 <0x0001f000 0x0021f000 0x001000>,	/* ap 30 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 31 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 32 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 33 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 34 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 35 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 36 */
+			 <0x00012000 0x00212000 0x001000>,	/* ap 37 */
+			 <0x00013000 0x00213000 0x001000>,	/* ap 38 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 39 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 40 */
+			 <0x00010000 0x00210000 0x001000>,	/* ap 41 */
+			 <0x00011000 0x00211000 0x001000>,	/* ap 42 */
+			 <0x00016000 0x00216000 0x001000>,	/* ap 43 */
+			 <0x00017000 0x00217000 0x001000>,	/* ap 44 */
+			 <0x00014000 0x00214000 0x001000>,	/* ap 45 */
+			 <0x00015000 0x00215000 0x001000>,	/* ap 46 */
+			 <0x00018000 0x00218000 0x001000>,	/* ap 47 */
+			 <0x00019000 0x00219000 0x001000>,	/* ap 48 */
+			 <0x00020000 0x00220000 0x001000>,	/* ap 49 */
+			 <0x00021000 0x00221000 0x001000>,	/* ap 50 */
+			 <0x00026000 0x00226000 0x001000>,	/* ap 51 */
+			 <0x00027000 0x00227000 0x001000>,	/* ap 52 */
+			 <0x00028000 0x00228000 0x001000>,	/* ap 53 */
+			 <0x00029000 0x00229000 0x001000>,	/* ap 54 */
+			 <0x0002a000 0x0022a000 0x001000>,	/* ap 55 */
+			 <0x0002b000 0x0022b000 0x001000>,	/* ap 56 */
+			 <0x0001c000 0x0021c000 0x001000>,	/* ap 57 */
+			 <0x0001d000 0x0021d000 0x001000>,	/* ap 58 */
+			 <0x0001a000 0x0021a000 0x001000>,	/* ap 73 */
+			 <0x0001b000 0x0021b000 0x001000>,	/* ap 74 */
+			 <0x00024000 0x00224000 0x001000>,	/* ap 75 */
+			 <0x00025000 0x00225000 0x001000>,	/* ap 76 */
+			 <0x00002000 0x00202000 0x001000>,	/* ap 103 */
+			 <0x00003000 0x00203000 0x001000>,	/* ap 104 */
+			 <0x00008000 0x00208000 0x001000>,	/* ap 105 */
+			 <0x00009000 0x00209000 0x001000>,	/* ap 106 */
+			 <0x00022000 0x00222000 0x001000>,	/* ap 107 */
+			 <0x00023000 0x00223000 0x001000>;	/* ap 108 */
+
+		target-module@2000 {			/* 0x4a202000, ap 103 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@4000 {			/* 0x4a204000, ap 35 46.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4a206000, ap 33 4e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a208000, ap 105 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a20a000, ap 31 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4a20c000, ap 39 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x4a210000, ap 41 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@12000 {			/* 0x4a212000, ap 37 52.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x4a214000, ap 45 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x4a216000, ap 43 42.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x4a218000, ap 47 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x1000>;
+		};
+
+		target-module@1a000 {			/* 0x4a21a000, ap 73 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1a000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4a21c000, ap 57 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4a21e000, ap 29 12.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x4a220000, ap 49 4a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x4a222000, ap 107 3a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x4a224000, ap 75 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x4a226000, ap 51 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@28000 {			/* 0x4a228000, ap 53 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4a22a000, ap 55 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+		};
+	};
+
+	segment@280000 {					/* 0x4a280000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@300000 {					/* 0x4a300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&l4_per {						/* 0x48000000 */
+	compatible = "ti,omap5-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
+		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 13 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 14 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 15 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 16 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 17 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 18 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 19 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 20 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 21 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 22 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 23 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 24 */
+			 <0x0006b000 0x0006b000 0x001000>,	/* ap 25 */
+			 <0x0006c000 0x0006c000 0x001000>,	/* ap 26 */
+			 <0x0006d000 0x0006d000 0x001000>,	/* ap 27 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 28 */
+			 <0x0006f000 0x0006f000 0x001000>,	/* ap 29 */
+			 <0x00070000 0x00070000 0x001000>,	/* ap 30 */
+			 <0x00071000 0x00071000 0x001000>,	/* ap 31 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 32 */
+			 <0x00073000 0x00073000 0x001000>,	/* ap 33 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 34 */
+			 <0x00053000 0x00053000 0x001000>,	/* ap 35 */
+			 <0x00054000 0x00054000 0x001000>,	/* ap 36 */
+			 <0x000b2000 0x000b2000 0x001000>,	/* ap 37 */
+			 <0x000b3000 0x000b3000 0x001000>,	/* ap 38 */
+			 <0x00078000 0x00078000 0x001000>,	/* ap 39 */
+			 <0x00079000 0x00079000 0x001000>,	/* ap 40 */
+			 <0x00086000 0x00086000 0x001000>,	/* ap 41 */
+			 <0x00087000 0x00087000 0x001000>,	/* ap 42 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 43 */
+			 <0x00089000 0x00089000 0x001000>,	/* ap 44 */
+			 <0x00051000 0x00051000 0x001000>,	/* ap 45 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 46 */
+			 <0x00098000 0x00098000 0x001000>,	/* ap 47 */
+			 <0x00099000 0x00099000 0x001000>,	/* ap 48 */
+			 <0x0009a000 0x0009a000 0x001000>,	/* ap 49 */
+			 <0x0009b000 0x0009b000 0x001000>,	/* ap 50 */
+			 <0x0009c000 0x0009c000 0x001000>,	/* ap 51 */
+			 <0x0009d000 0x0009d000 0x001000>,	/* ap 52 */
+			 <0x00068000 0x00068000 0x001000>,	/* ap 53 */
+			 <0x00069000 0x00069000 0x001000>,	/* ap 54 */
+			 <0x00090000 0x00090000 0x002000>,	/* ap 55 */
+			 <0x00092000 0x00092000 0x001000>,	/* ap 56 */
+			 <0x000a4000 0x000a4000 0x001000>,	/* ap 57 */
+			 <0x000a6000 0x000a6000 0x001000>,	/* ap 58 */
+			 <0x000a8000 0x000a8000 0x004000>,	/* ap 59 */
+			 <0x000ac000 0x000ac000 0x001000>,	/* ap 60 */
+			 <0x000ad000 0x000ad000 0x001000>,	/* ap 61 */
+			 <0x000ae000 0x000ae000 0x001000>,	/* ap 62 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 63 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 64 */
+			 <0x000b4000 0x000b4000 0x001000>,	/* ap 65 */
+			 <0x000b5000 0x000b5000 0x001000>,	/* ap 66 */
+			 <0x000b8000 0x000b8000 0x001000>,	/* ap 67 */
+			 <0x000b9000 0x000b9000 0x001000>,	/* ap 68 */
+			 <0x000ba000 0x000ba000 0x001000>,	/* ap 69 */
+			 <0x000bb000 0x000bb000 0x001000>,	/* ap 70 */
+			 <0x000d1000 0x000d1000 0x001000>,	/* ap 71 */
+			 <0x000d2000 0x000d2000 0x001000>,	/* ap 72 */
+			 <0x000d5000 0x000d5000 0x001000>,	/* ap 73 */
+			 <0x000d6000 0x000d6000 0x001000>,	/* ap 74 */
+			 <0x000a2000 0x000a2000 0x001000>,	/* ap 75 */
+			 <0x000a3000 0x000a3000 0x001000>,	/* ap 76 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 77 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 78 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 79 */
+			 <0x000a5000 0x000a5000 0x001000>,	/* ap 80 */
+			 <0x0007a000 0x0007a000 0x001000>,	/* ap 81 */
+			 <0x0007b000 0x0007b000 0x001000>,	/* ap 82 */
+			 <0x0007c000 0x0007c000 0x001000>,	/* ap 83 */
+			 <0x0007d000 0x0007d000 0x001000>;	/* ap 84 */
+
+		target-module@20000 {			/* 0x48020000, ap 3 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@32000 {			/* 0x48032000, ap 5 3e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x34000 0x4>,
+			      <0x34010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@51000 {			/* 0x48051000, ap 45 2e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x51000 0x4>,
+			      <0x51010 0x4>,
+			      <0x51114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x51000 0x1000>;
+
+			gpio7: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@53000 {			/* 0x48053000, ap 35 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53000 0x4>,
+			      <0x53010 0x4>,
+			      <0x53114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53000 0x1000>;
+
+			gpio8: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55000 0x4>,
+			      <0x55010 0x4>,
+			      <0x55114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x57000 0x4>,
+			      <0x57010 0x4>,
+			      <0x57114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@59000 {			/* 0x48059000, ap 17 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x59000 0x4>,
+			      <0x59010 0x4>,
+			      <0x59114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4805b000, ap 19 1e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5b000 0x4>,
+			      <0x5b010 0x4>,
+			      <0x5b114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4805d000, ap 21 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5d000 0x4>,
+			      <0x5d010 0x4>,
+			      <0x5d114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			gpio6: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 23 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x60000 0x8>,
+			      <0x60010 0x8>,
+			      <0x60090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			i2c3: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@66000 {			/* 0x48066000, ap 63 4c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x66050 0x4>,
+			      <0x66054 0x4>,
+			      <0x66058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@68000 {			/* 0x48068000, ap 53 54.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x68050 0x4>,
+			      <0x68054 0x4>,
+			      <0x68058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x68000 0x1000>;
+
+			uart6: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6a000 {			/* 0x4806a000, ap 24 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6a050 0x4>,
+			      <0x6a054 0x4>,
+			      <0x6a058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6a000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6c000 {			/* 0x4806c000, ap 26 22.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6c050 0x4>,
+			      <0x6c054 0x4>,
+			      <0x6c058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6e000 {			/* 0x4806e000, ap 28 44.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6e050 0x4>,
+			      <0x6e054 0x4>,
+			      <0x6e058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6e000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@70000 {			/* 0x48070000, ap 30 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x70000 0x8>,
+			      <0x70010 0x8>,
+			      <0x70090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@72000 {			/* 0x48072000, ap 32 1c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x72000 0x8>,
+			      <0x72010 0x8>,
+			      <0x72090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x72000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@78000 {			/* 0x48078000, ap 39 12.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x1000>;
+		};
+
+		target-module@7a000 {			/* 0x4807a000, ap 81 2c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7a000 0x8>,
+			      <0x7a010 0x8>,
+			      <0x7a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7a000 0x1000>;
+
+			i2c4: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@7c000 {			/* 0x4807c000, ap 83 34.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7c000 0x8>,
+			      <0x7c010 0x8>,
+			      <0x7c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7c000 0x1000>;
+
+			i2c5: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x86000 0x4>,
+			      <0x86010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x88000 0x4>,
+			      <0x88010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x88000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		rng_target: target-module@90000 {	/* 0x48090000, ap 55 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x98000 0x4>,
+			      <0x98010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000 0x1000>;
+
+			mcspi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <4>;
+				dmas = <&sdma 35>,
+				       <&sdma 36>,
+				       <&sdma 37>,
+				       <&sdma 38>,
+				       <&sdma 39>,
+				       <&sdma 40>,
+				       <&sdma 41>,
+				       <&sdma 42>;
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					    "tx2", "rx2", "tx3", "rx3";
+			};
+		};
+
+		target-module@9a000 {			/* 0x4809a000, ap 49 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9a000 0x4>,
+			      <0x9a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9a000 0x1000>;
+
+			mcspi2: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 43>,
+				       <&sdma 44>,
+				       <&sdma 45>,
+				       <&sdma 46>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+		};
+
+		target-module@9c000 {			/* 0x4809c000, ap 51 3a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9c000 0x4>,
+			      <0x9c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				ti,dual-volt;
+				ti,needs-special-reset;
+				dmas = <&sdma 61>, <&sdma 62>;
+				dma-names = "tx", "rx";
+				pbias-supply = <&pbias_mmc_reg>;
+			};
+		};
+
+		target-module@a2000 {			/* 0x480a2000, ap 75 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x480a4000, ap 57 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x000a4000 0x00001000>,
+				 <0x00001000 0x000a5000 0x00001000>;
+		};
+
+		target-module@a8000 {			/* 0x480a8000, ap 59 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x4000>;
+		};
+
+		target-module@ad000 {			/* 0x480ad000, ap 61 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xad000 0x4>,
+			      <0xad010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xad000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 77>, <&sdma 78>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b2000 {			/* 0x480b2000, ap 37 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb2000 0x1000>;
+		};
+
+		target-module@b4000 {			/* 0x480b4000, ap 65 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb4000 0x4>,
+			      <0xb4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb4000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 47>, <&sdma 48>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b8000 {			/* 0x480b8000, ap 67 32.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb8000 0x4>,
+			      <0xb8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb8000 0x1000>;
+
+			mcspi3: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 15>, <&sdma 16>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@ba000 {			/* 0x480ba000, ap 69 18.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xba000 0x4>,
+			      <0xba010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xba000 0x1000>;
+
+			mcspi4: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <1>;
+				dmas = <&sdma 70>, <&sdma 71>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@d1000 {			/* 0x480d1000, ap 71 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd1000 0x4>,
+			      <0xd1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd1000 0x1000>;
+
+			mmc4: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 57>, <&sdma 58>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@d5000 {			/* 0x480d5000, ap 73 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd5000 0x4>,
+			      <0xd5010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd5000 0x1000>;
+
+			mmc5: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 59>, <&sdma 60>;
+				dma-names = "tx", "rx";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&l4_wkup {						/* 0x4ae00000 */
+	compatible = "ti,omap5-l4-wkup", "simple-bus";
+	reg = <0x4ae00000 0x800>,
+	      <0x4ae00800 0x800>,
+	      <0x4ae01000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4ae00000 0x010000>,	/* segment 0 */
+		 <0x00010000 0x4ae10000 0x010000>,	/* segment 1 */
+		 <0x00020000 0x4ae20000 0x010000>;	/* segment 2 */
+
+	segment@0 {					/* 0x4ae00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 15 */
+			 <0x0000b000 0x0000b000 0x001000>,	/* ap 16 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 17 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0000d000 0x001000>;	/* ap 20 */
+
+		target-module@4000 {			/* 0x4ae04000, ap 17 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "counter_32k";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x0 0x40>;
+			};
+		};
+
+		target-module@6000 {			/* 0x4ae06000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x2000>;
+
+			prm: prm@0 {
+				compatible = "ti,omap5-prm", "simple-bus";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				prm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@a000 {			/* 0x4ae0a000, ap 15 2c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			scrm: scrm@0 {
+				compatible = "ti,omap5-scrm";
+				reg = <0x0 0x1000>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				scrm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@c000 {			/* 0x4ae0c000, ap 19 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			omap5_pmx_wkup: pinmux@840 {
+				compatible = "ti,omap5-padconf",
+					     "pinctrl-single";
+				reg = <0x840 0x003c>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 {
+				compatible = "ti,omap5-scm-wkup-pad-conf",
+					     "simple-bus";
+				reg = <0xda0 0x60>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x60>;
+
+				scm_wkup_pad_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x60>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x0 0x60>;
+
+					scm_wkup_pad_conf_clocks: clocks@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
+		};
+	};
+
+	segment@10000 {					/* 0x4ae10000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
+			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
+			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
+			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
+			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
+			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
+			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
+			 <0x0000d000 0x0001d000 0x001000>;	/* ap 12 */
+
+		target-module@0 {			/* 0x4ae10000, ap 5 10.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>,
+				 <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				ti,gpio-always-on;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@4000 {			/* 0x4ae14000, ap 7 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>,
+			      <0x4014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap5-wdt", "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@8000 {			/* 0x4ae18000, ap 9 18.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			ti,hwmods = "timer1";
+			reg = <0x8000 0x4>,
+			      <0x8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+			};
+		};
+
+		target-module@c000 {			/* 0x4ae1c000, ap 11 1c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xc000 0x4>,
+			      <0xc010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			keypad: keypad@0 {
+				compatible = "ti,omap4-keypad";
+				reg = <0x0 0x400>;
+			};
+		};
+	};
+
+	segment@20000 {					/* 0x4ae20000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x00000000 0x00020000 0x001000>,	/* ap 21 */
+			 <0x00001000 0x00021000 0x001000>,	/* ap 22 */
+			 <0x00002000 0x00022000 0x001000>,	/* ap 23 */
+			 <0x00003000 0x00023000 0x001000>,	/* ap 24 */
+			 <0x00007000 0x00027000 0x000400>,	/* ap 25 */
+			 <0x00008000 0x00028000 0x000800>,	/* ap 26 */
+			 <0x00009000 0x00029000 0x000100>,	/* ap 27 */
+			 <0x00008800 0x00028800 0x000200>,	/* ap 28 */
+			 <0x00008a00 0x00028a00 0x000100>;	/* ap 29 */
+
+		target-module@0 {			/* 0x4ae20000, ap 21 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+		};
+
+		target-module@2000 {			/* 0x4ae22000, ap 23 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4ae26000, ap 13 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00006000 0x00001000>,
+				 <0x00001000 0x00007000 0x00000400>,
+				 <0x00002000 0x00008000 0x00000800>,
+				 <0x00002800 0x00008800 0x00000200>,
+				 <0x00002a00 0x00008a00 0x00000100>,
+				 <0x00003000 0x00009000 0x00000100>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap5-u-boot.dtsi b/roms/u-boot/arch/arm/dts/omap5-u-boot.dtsi
new file mode 100644
index 000000000..5a1c7bc9f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap5-u-boot.dtsi
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "dra7.dtsi"
+ */
+
+#ifdef CONFIG_DRA7XX
+/{
+	chosen {
+		tick-timer = &timer2;
+	};
+
+	aliases {
+		usb0 = &usb1;
+		usb1 = &usb2;
+	};
+
+	ocp {
+		u-boot,dm-spl;
+
+		ocp2scp@4a080000 {
+			compatible = "ti,omap-ocp2scp", "simple-bus";
+			u-boot,dm-spl;
+		};
+
+		ocp2scp@4a090000 {
+			compatible = "ti,omap-ocp2scp", "simple-bus";
+		};
+
+		bandgap@4a0021e0 {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&uart1 {
+	u-boot,dm-spl;
+	reg-shift = <2>;
+};
+
+&uart3 {
+	u-boot,dm-spl;
+	reg-shift = <2>;
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+};
+
+&mmc2 {
+	u-boot,dm-spl;
+};
+
+&l4_cfg {
+	u-boot,dm-spl;
+};
+
+&scm {
+	u-boot,dm-spl;
+};
+
+&scm_conf {
+	u-boot,dm-spl;
+};
+
+&qspi {
+	u-boot,dm-spl;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		u-boot,dm-spl;
+	};
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&gpio6 {
+	u-boot,dm-spl;
+};
+
+&gpio7 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+#else /* OMAP54XX */
+&l4_cfg {
+	segment@0 {
+		/* SCM Core */
+		target-module@2000 {
+			compatible = "simple-bus";
+		};
+
+		/* USB HS */
+		target-module@64000 {
+			compatible = "simple-bus";
+		};
+	};
+};
+
+&l4_per {
+	segment@0 {
+		/* UART3 */
+		target-module@20000 {
+			compatible = "simple-bus";
+		};
+
+		/* I2C1 */
+		target-module@70000 {
+			compatible = "simple-bus";
+		};
+
+		/* MMC1 */
+		target-module@9c000 {
+			compatible = "simple-bus";
+		};
+
+		/* MMC2 */
+		target-module@b4000 {
+			compatible = "simple-bus";
+		};
+	};
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/dts/omap5-uevm.dts b/roms/u-boot/arch/arm/dts/omap5-uevm.dts
new file mode 100644
index 000000000..9441e9a57
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap5-uevm.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap5-board-common.dtsi"
+
+/ {
+	model = "TI OMAP5 uEVM board";
+	compatible = "ti,omap5-uevm", "ti,omap5";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
+	};
+
+	aliases {
+		ethernet = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	evm_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&evm_keys_pins>;
+
+		#address-cells = <7>;
+		#size-cells = <0>;
+
+		btn1 {
+			label = "BTN1";
+			linux,code = <169>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
+			wakeup-source;
+			autorepeat;
+			debounce-interval = <50>;
+		};
+	};
+
+	evm_leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "omap5:red:led";
+			gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "omap5:green:led";
+			gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "omap5:blue:led";
+			gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "omap5:green:led1";
+			gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "omap5:green:led2";
+			gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "omap5:green:led3";
+			gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led7 {
+			label = "omap5:green:led4";
+			gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led8 {
+			label = "omap5:green:led5";
+			gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+};
+
+&hdmi {
+	vdda-supply = <&ldo4_reg>;
+};
+
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+
+	clock-frequency = <400000>;
+
+	gpio9: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>;	/* gpio5_152 */
+};
+
+&omap5_pmx_core {
+	evm_keys_pins: pinmux_evm_keys_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)	/* gpio3_83 */
+		>;
+	};
+
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
+			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpio5_152 */
+		>;
+	};
+};
+
+&tpd12s015 {
+	gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
+		<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
+		<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
+};
+
+&twl6040 {
+	ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
+};
+
+&twl6040_pins {
+	pinctrl-single,pins = <
+		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+	>;
+};
+
+&usbhsehci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@2 {
+		compatible = "usb424,3503";
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	ethernet: usbether@3 {
+		compatible = "usb424,9730";
+		reg = <3>;
+	};
+};
+
+&wlcore {
+	compatible = "ti,wl1837";
+};
diff --git a/roms/u-boot/arch/arm/dts/omap5.dtsi b/roms/u-boot/arch/arm/dts/omap5.dtsi
new file mode 100644
index 000000000..2ac7f021c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap5.dtsi
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/clock/omap5.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "ti,omap5";
+	interrupt-parent = <&wakeupgen>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000 1060000
+				1500000 1250000
+			>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000 1060000
+				1500000 1250000
+			>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+		#include "omap5-gpu-thermal.dtsi"
+		#include "omap5-core-thermal.dtsi"
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		/* PPI secure/nonsecure IRQ */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0 0x48211000 0 0x1000>,
+		      <0 0x48212000 0 0x2000>,
+		      <0 0x48214000 0 0x2000>,
+		      <0 0x48216000 0 0x2000>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0 0x48281000 0 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap5-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xc0000000>;
+		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+		reg = <0 0x44000000 0 0x2000>,
+		      <0 0x44800000 0 0x3000>,
+		      <0 0x45000000 0 0x4000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_wkup: interconnect@4ae00000 {
+		};
+
+		l4_cfg: interconnect@4a000000 {
+		};
+
+		l4_per: interconnect@48000000 {
+		};
+
+		l4_abe: interconnect@40100000 {
+		};
+
+		ocmcram: sram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x20000>; /* 128k */
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,omap4430-gpmc";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
+		emif1: emif@4c000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif1";
+			ti,no-idle-on-init;
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4c000000 0x400>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@4d000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif2";
+			ti,no-idle-on-init;
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4d000000 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		bandgap: bandgap@4a0021e0 {
+			reg = <0x4a0021e0 0xc
+			       0x4a00232c 0xc
+			       0x4a002380 0x2c
+			       0x4a0023C0 0x3c>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			compatible = "ti,omap5430-bandgap";
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		/* OCP2SCP3 */
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
+		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x58000000 0x1000000>;
+
+			dss: dss@0 {
+				compatible = "ti,omap5-dss";
+				reg = <0 0x80>;
+				status = "disabled";
+				clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000000>;
+
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
+						compatible = "ti,omap5-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@2000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x2000 0x4>,
+					      <0x2010 0x4>,
+					      <0x2014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x2000 0x1000>;
+
+					rfbi: encoder@0  {
+						compatible = "ti,omap5-rfbi";
+						reg = <0 0x100>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
+						clock-names = "fck", "ick";
+					};
+				};
+
+				target-module@5000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x5000 0x4>,
+					      <0x5010 0x4>,
+					      <0x5014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x5000 0x1000>;
+
+					dsi1: encoder@0 {
+						compatible = "ti,omap5-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x40>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@9000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x9000 0x4>,
+					      <0x9010 0x4>,
+					      <0x9014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x9000 0x1000>;
+
+					dsi2: encoder@0 {
+						compatible = "ti,omap5-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x40>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@40000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x40000 0x4>,
+					      <0x40010 0x4>;
+					reg-names = "rev", "sysc";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>,
+							<SYSC_IDLE_SMART_WKUP>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x40000 0x40000>;
+
+					hdmi: encoder@0 {
+						compatible = "ti,omap5-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x80>,
+						      <0x300 0x80>,
+						      <0x20000 0x19000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma 76>;
+						dma-names = "audio_tx";
+					};
+				};
+			};
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+			      <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1250000		0	0x4	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_mm: regulator-abb-mm {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mm";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+			      <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80000000>;
+			/* LDOVBBMM_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMM_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1025000		0	0x0	0 0x02000000 0x01F00000
+			1120000		0	0x4	0 0x02000000 0x01F00000
+			>;
+		};
+	};
+};
+
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
+	coefficients = <65 (-1791)>;
+};
+
+#include "omap5-l4.dtsi"
+#include "omap54xx-clocks.dtsi"
+
+&gpu_thermal {
+	coefficients = <117 (-2992)>;
+};
+
+&core_thermal {
+	coefficients = <0 2000>;
+};
+
+#include "omap5-l4-abe.dtsi"
+#include "omap54xx-clocks.dtsi"
+
+&prm {
+	prm_dsp: prm@400 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x400 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_core: prm@700 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x700 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_iva: prm@1200 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1200 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_device: prm@1c00 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1c00 0x100>;
+		#reset-cells = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/omap54xx-clocks.dtsi b/roms/u-boot/arch/arm/dts/omap54xx-clocks.dtsi
new file mode 100644
index 000000000..42f2c4477
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/omap54xx-clocks.dtsi
@@ -0,0 +1,1208 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP5 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_core_aon_clocks {
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck@108 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck@1e0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	abe_iclk: abe_iclk@528 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_byp_mux: dpll_core_byp_mux@12c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck@120 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	c2c_fclk: c2c_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h21x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	c2c_iclk: c2c_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&c2c_fclk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck@1a0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+		assigned-clocks = <&dpll_iva_ck>;
+		assigned-clock-rates = <1165000000>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		assigned-clocks = <&dpll_iva_h11x2_ck>;
+		assigned-clock-rates = <465920000>;
+	};
+
+	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		assigned-clocks = <&dpll_iva_h12x2_ck>;
+		assigned-clock-rates = <388300000>;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,omap5-mpu-dpll-clock";
+		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_iclk_div: l3_iclk_div@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x100>;
+		clocks = <&dpll_core_h12x2_ck>;
+		ti,index-power-of-two;
+	};
+
+	gpu_l3_iclk: gpu_l3_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <8>;
+		reg = <0x100>;
+		clocks = <&l3_iclk_div>;
+		ti,index-power-of-two;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	aess_fclk: aess_fclk@528 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0540>;
+	};
+
+	mcasp_gfclk: mcasp_gfclk@540 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin: sys_clkin@110 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dss_syc_gfclk_div: dss_syc_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+
+&cm_core_clocks {
+
+	dpll_per_byp_mux: dpll_per_byp_mux@14c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_unipro1_ck: dpll_unipro1_ck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro1_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro1_ck>;
+		ti,max-div = <127>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_unipro2_ck: dpll_unipro2_ck@1c0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
+	};
+
+	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro2_ck>;
+		ti,max-div = <127>;
+		reg = <0x01d0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
+	dpll_usb_ck: dpll_usb_ck@180 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk@104 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	iss_ctrlclk: iss_ctrlclk@1320 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1320>;
+	};
+
+	lli_txphy_clk: lli_txphy_clk@f20 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x0f20>;
+	};
+
+	lli_txphy_ls_clk: lli_txphy_ls_clk@f20 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_m2_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0f20>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	fdif_fclk: fdif_fclk@1328 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1328>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux@1520 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1520>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1520>;
+	};
+
+	hsi_fclk: hsi_fclk@1638 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1638>;
+	};
+};
+
+&cm_core_clockdomains {
+	l3init_clkdm: l3init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+
+&scrm_clocks {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck@214 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck@218 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck@21c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+};
+
+&cm_core_aon {
+	mpu_cm: mpu_cm@300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x300 0x100>;
+
+		mpu_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	dsp_cm: dsp_cm@400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		dsp_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	abe_cm: abe_cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		abe_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x64>;
+			#clock-cells = <2>;
+		};
+	};
+
+};
+
+&cm_core {
+	l3main1_cm: l3main1_cm@700 {
+		compatible = "ti,omap4-cm";
+		reg = <0x700 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x700 0x100>;
+
+		l3main1_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3main2_cm: l3main2_cm@800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x800 0x100>;
+
+		l3main2_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	ipu_cm: ipu_cm@900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		ipu_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	dma_cm: dma_cm@a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		dma_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	emif_cm: emif_cm@b00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xb00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xb00 0x100>;
+
+		emif_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x1c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4cfg_cm: l4cfg_cm@d00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xd00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xd00 0x100>;
+
+		l4cfg_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x14>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3instr_cm: l3instr_cm@e00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xe00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe00 0x100>;
+
+		l3instr_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4per_cm: l4per_cm@1000 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x200>;
+
+		l4per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4per", "ti,clkctrl";
+			reg = <0x20 0x15c>;
+			#clock-cells = <2>;
+		};
+
+		l4sec_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4sec", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	dss_cm: dss_cm@1400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1400 0x100>;
+
+		dss_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gpu_cm: gpu_cm@1500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1500 0x100>;
+
+		gpu_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3init_cm: l3init_cm@1600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1600 0x100>;
+
+		l3init_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xd4>;
+			#clock-cells = <2>;
+		};
+	};
+};
+
+&prm {
+	wkupaon_cm: wkupaon_cm@1900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1900 0x100>;
+
+		wkupaon_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x5c>;
+			#clock-cells = <2>;
+		};
+	};
+};
+
+&scm_wkup_pad_conf_clocks {
+	fref_xtal_ck: fref_xtal_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin>;
+		ti,bit-shift = <28>;
+		reg = <0x14>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/phycore-imx8mm-u-boot.dtsi b/roms/u-boot/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
new file mode 100644
index 000000000..91515b8df
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
+&pinctrl_uart3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart3 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/phycore-imx8mm.dts b/roms/u-boot/arch/arm/dts/phycore-imx8mm.dts
new file mode 100644
index 000000000..c46d3c72c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/phycore-imx8mm.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX8MM";
+	compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-patch = &uart3;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+/* ethernet */
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+		};
+	};
+};
+
+/* i2c eeprom */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* M24C32-D */
+	i2c_eeprom: eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		u-boot,i2c-offset-len = <2>;
+	};
+
+	/* M24C32-D Identification page */
+	i2c_eeprom_id: eeprom@59 {
+		compatible = "atmel,24c32";
+		reg = <0x59>;
+		u-boot,i2c-offset-len = <2>;
+	};
+};
+
+/* debug console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* sd-card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* watchdog */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1grp-gpio {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x1c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x49
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12        0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/phytium-durian.dts b/roms/u-boot/arch/arm/dts/phytium-durian.dts
new file mode 100644
index 000000000..3b76949a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/phytium-durian.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019, Phytium Ltd.
+ * shuyiqi  <shuyiqi@phytium.com.cn>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Phytium Durian";
+	compatible = "phytium,durian";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	pcie-controller@40000000 {
+		compatible = "phytium,pcie-host-1.0";
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		reg = <0x0 0x40000000 0x0 0x10000000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x1000000 0x0 0x0 0x0 0x50000000 0x0 0xF00000>,
+		<0x2000000 0x0 0x58000000 0x0 0x58000000 0x0 0x28000000>,
+		<0x43000000 0x10 0x00000000 0x10 0x00000000 0x10  0x00000000>;
+	};
+
+	uart@28001000 {
+		compatible = "arm,pl011";
+		reg = <0x0 0x28001000 0x0 0x1000>;
+		clock = <48000000>;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/poplar-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/poplar-pinctrl.dtsi
new file mode 100644
index 000000000..7bb19e4b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/poplar-pinctrl.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl dts file for HiSilicon Poplar board
+ *
+ * Copyright (c) 2016-2018 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/* value, enable bits, disable bits, mask */
+#define PINCTRL_PULLDOWN(value, enable, disable, mask) \
+	(value << 13) (enable << 13) (disable << 13) (mask << 13)
+#define PINCTRL_PULLUP(value, enable, disable, mask) \
+	(value << 12) (enable << 12) (disable << 12) (mask << 12)
+#define PINCTRL_SLEW_RATE(value, mask)	  (value << 8) (mask << 8)
+#define PINCTRL_DRV_STRENGTH(value, mask) (value << 4) (mask << 4)
+
+&pmx0 {
+	emmc_pins_1: emmc-pins-1 {
+		pinctrl-single,pins = <
+			0x000 MUX_M2
+			0x004 MUX_M2
+			0x008 MUX_M2
+			0x00c MUX_M2
+			0x010 MUX_M2
+			0x014 MUX_M2
+			0x018 MUX_M2
+			0x01c MUX_M2
+			0x024 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(0xb, 0xf)
+		>;
+	};
+
+	emmc_pins_2: emmc-pins-2 {
+		pinctrl-single,pins = <
+			0x028 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(0x9, 0xf)
+		>;
+	};
+
+	emmc_pins_3: emmc-pins-3 {
+		pinctrl-single,pins = <
+			0x02c MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(3, 3)
+		>;
+	};
+
+	emmc_pins_4: emmc-pins-4 {
+		pinctrl-single,pins = <
+			0x030 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(1, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(3, 3)
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/px30-engicam-common.dtsi b/roms/u-boot/arch/arm/dts/px30-engicam-common.dtsi
new file mode 100644
index 000000000..bd5bde989
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-engicam-common.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";	/* +5V */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_3v3>;	/* +3V3_SOM */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	vmmc-supply = <&vcc_3v3>;	/* +3V3_SOM */
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/px30-engicam-ctouch2.dtsi b/roms/u-boot/arch/arm/dts/px30-engicam-ctouch2.dtsi
new file mode 100644
index 000000000..58425b1e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-engicam-ctouch2.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/px30-engicam-edimm2.2.dtsi b/roms/u-boot/arch/arm/dts/px30-engicam-edimm2.2.dtsi
new file mode 100644
index 000000000..cb0098895
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-engicam-edimm2.2.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/px30-evb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/px30-evb-u-boot.dtsi
new file mode 100644
index 000000000..61b1433af
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-evb-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2020 Rockchip Electronics Co., Ltd
+ */
+
+#include "px30-u-boot.dtsi"
+
+&rng {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/px30-evb.dts b/roms/u-boot/arch/arm/dts/px30-evb.dts
new file mode 100644
index 000000000..4134e2ee1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-evb.dts
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	model = "Rockchip PX30 EVB";
+	compatible = "rockchip,px30-evb", "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		esc-key {
+			label = "esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1310000>;
+		};
+
+		home-key {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <624000>;
+		};
+
+		menu-key {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <987000>;
+		};
+
+		vol-down-key {
+			label = "volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		vol-up-key {
+			label = "volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 25000 0>;
+		power-supply = <&vcc3v3_lcd>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+	};
+
+	vcc5v0_sys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "sitronix,st7703";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v0>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_rmii>;
+	snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0: vcc_rmii: DCDC_REG4 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG5 {
+				regulator-name = "vcc3v3_sys";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG1 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v0_pmu: LDO_REG4 {
+				regulator-name = "vcc3v0_pmu";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG7 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v5_dvp: LDO_REG9 {
+				regulator-name = "vcc1v5_dvp";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc3v3_lcd: SWITCH_REG1 {
+				regulator-name = "vcc3v3_lcd";
+				regulator-boot-on;
+			};
+
+			vcc5v0_host: SWITCH_REG2 {
+				regulator-name = "vcc5v0_host";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vccio_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v0>;
+	vccio4-supply = <&vcc3v0_pmu>;
+	vccio5-supply = <&vcc_3v0>;
+	vccio6-supply = <&vccio_flash>;
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins =
+				<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins =
+				<0 RK_PA4 1 &pcfg_pull_none>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins =
+				<0 RK_PA4 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmuio1-supply = <&vcc3v0_pmu>;
+	pmuio2-supply = <&vcc3v0_pmu>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/px30-firefly-u-boot.dtsi b/roms/u-boot/arch/arm/dts/px30-firefly-u-boot.dtsi
new file mode 100644
index 000000000..aea9f4d6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-firefly-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2020 Rockchip Electronics Co., Ltd
+ */
+
+#include "px30-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/px30-firefly.dts b/roms/u-boot/arch/arm/dts/px30-firefly.dts
new file mode 100644
index 000000000..c0a8e3009
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-firefly.dts
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	model = "Firefly Core-PX30-JD4";
+	compatible = "rockchip,px30-firefly", "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		esc-key {
+			label = "esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1310000>;
+		};
+
+		home-key {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <624000>;
+		};
+
+		menu-key {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <987000>;
+		};
+
+		vol-down-key {
+			label = "volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		vol-up-key {
+			label = "volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 25000 0>;
+		power-supply = <&vcc3v3_lcd>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+	};
+
+	vcc5v0_sys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "sitronix,st7703";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v0>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_rmii>;
+	snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0: vcc_rmii: DCDC_REG4 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG5 {
+				regulator-name = "vcc3v3_sys";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG1 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v0_pmu: LDO_REG4 {
+				regulator-name = "vcc3v0_pmu";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG7 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v5_dvp: LDO_REG9 {
+				regulator-name = "vcc1v5_dvp";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc3v3_lcd: SWITCH_REG1 {
+				regulator-name = "vcc3v3_lcd";
+				regulator-boot-on;
+			};
+
+			vcc5v0_host: SWITCH_REG2 {
+				regulator-name = "vcc5v0_host";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vccio_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v0>;
+	vccio4-supply = <&vcc3v0_pmu>;
+	vccio5-supply = <&vcc_3v0>;
+	vccio6-supply = <&vccio_flash>;
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins =
+				<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins =
+				<0 RK_PA4 1 &pcfg_pull_none>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins =
+				<0 RK_PA4 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmuio1-supply = <&vcc3v0_pmu>;
+	pmuio2-supply = <&vcc3v0_pmu>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/px30-px30-core-ctouch2.dts b/roms/u-boot/arch/arm/dts/px30-px30-core-ctouch2.dts
new file mode 100644
index 000000000..2da012818
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-px30-core-ctouch2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core C.TOUCH 2.0";
+	compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
+		     "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/px30-px30-core-edimm2.2.dts b/roms/u-boot/arch/arm/dts/px30-px30-core-edimm2.2.dts
new file mode 100644
index 000000000..c36280ce7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-px30-core-edimm2.2.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-edimm2.2.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
+	compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core",
+		     "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/px30-px30-core.dtsi b/roms/u-boot/arch/arm/dts/px30-px30-core.dtsi
new file mode 100644
index 000000000..16e6cf28a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-px30-core.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+	compatible = "engicam,px30-px30-core", "rockchip,px30";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG5 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG1 {
+				regulator-name = "vcc_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v0_pmu: LDO_REG4 {
+				regulator-name = "vcc3v0_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc5v0_host: SWITCH_REG2 {
+				regulator-name = "vcc5v0_host";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_3v3>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/px30-u-boot.dtsi b/roms/u-boot/arch/arm/dts/px30-u-boot.dtsi
new file mode 100644
index 000000000..029c8fbd8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30-u-boot.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		u-boot,spl-boot-order = &emmc, &sdmmc;
+	};
+
+	rng: rng@ff0b0000 {
+		compatible = "rockchip,cryptov2-rng";
+		reg = <0x0 0xff0b0000 0x0 0x4000>;
+		status = "disabled";
+	};
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	clock-frequency = <24000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart5 {
+	clock-frequency = <24000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+
+	/* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
+	u-boot,spl-fifo-mode;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+
+	/* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
+	u-boot,spl-fifo-mode;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&pmugrf {
+	u-boot,dm-pre-reloc;
+};
+
+&xin24m {
+	u-boot,dm-pre-reloc;
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&pmucru {
+	u-boot,dm-pre-reloc;
+};
+
+&saradc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/px30.dtsi b/roms/u-boot/arch/arm/dts/px30.dtsi
new file mode 100644
index 000000000..b6c79e7ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/px30.dtsi
@@ -0,0 +1,2228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/px30-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/px30-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,px30";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	cpu0_opp_table: cpu0-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000 950000 1350000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1050000 1050000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1175000 1175000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	dmc: dmc {
+		compatible = "rockchip,px30-dmc", "syscon";
+		reg = <0x0 0xff2a0000 0x0 0x1000>;
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopb_out>, <&vopl_out>;
+		status = "disabled";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal_zones: thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <750>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point-0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point-1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: soc-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&tsadc 1>;
+		};
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	pmu: power-management@ff000000 {
+		compatible = "rockchip,px30-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff000000 0x0 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,px30-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_LOGIC */
+			pd_usb@PX30_PD_USB {
+				reg = <PX30_PD_USB>;
+				clocks = <&cru HCLK_HOST>,
+					 <&cru HCLK_OTG>,
+					 <&cru SCLK_OTG_ADP>;
+				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+			};
+			pd_sdcard@PX30_PD_SDCARD {
+				reg = <PX30_PD_SDCARD>;
+				clocks = <&cru HCLK_SDMMC>,
+					 <&cru SCLK_SDMMC>;
+				pm_qos = <&qos_sdmmc>;
+			};
+			pd_gmac@PX30_PD_GMAC {
+				reg = <PX30_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>,
+					 <&cru PCLK_GMAC>,
+					 <&cru SCLK_MAC_REF>,
+					 <&cru SCLK_GMAC_RX_TX>;
+				pm_qos = <&qos_gmac>;
+			};
+			pd_mmc_nand@PX30_PD_MMC_NAND {
+				reg = <PX30_PD_MMC_NAND>;
+				clocks =  <&cru HCLK_NANDC>,
+					  <&cru HCLK_EMMC>,
+					  <&cru HCLK_SDIO>,
+					  <&cru HCLK_SFC>,
+					  <&cru SCLK_EMMC>,
+					  <&cru SCLK_NANDC>,
+					  <&cru SCLK_SDIO>,
+					  <&cru SCLK_SFC>;
+				pm_qos = <&qos_emmc>, <&qos_nand>,
+					 <&qos_sdio>, <&qos_sfc>;
+			};
+			pd_vpu@PX30_PD_VPU {
+				reg = <PX30_PD_VPU>;
+				clocks = <&cru ACLK_VPU>,
+					 <&cru HCLK_VPU>,
+					 <&cru SCLK_CORE_VPU>;
+				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+			};
+			pd_vo@PX30_PD_VO {
+				reg = <PX30_PD_VO>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru ACLK_VOPB>,
+					 <&cru ACLK_VOPL>,
+					 <&cru DCLK_VOPB>,
+					 <&cru DCLK_VOPL>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VOPB>,
+					 <&cru HCLK_VOPL>,
+					 <&cru PCLK_MIPI_DSI>,
+					 <&cru SCLK_RGA_CORE>,
+					 <&cru SCLK_VOPB_PWM>;
+				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
+					 <&qos_vop_m0>, <&qos_vop_m1>;
+			};
+			pd_vi@PX30_PD_VI {
+				reg = <PX30_PD_VI>;
+				clocks = <&cru ACLK_CIF>,
+					 <&cru ACLK_ISP>,
+					 <&cru HCLK_CIF>,
+					 <&cru HCLK_ISP>,
+					 <&cru SCLK_ISP>;
+				pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
+					 <&qos_isp_wr>, <&qos_isp_m1>,
+					 <&qos_vip>;
+			};
+			pd_gpu@PX30_PD_GPU {
+				reg = <PX30_PD_GPU>;
+				clocks = <&cru SCLK_GPU>;
+				pm_qos = <&qos_gpu>;
+			};
+		};
+	};
+
+	pmugrf: syscon@ff010000 {
+		compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff010000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,px30-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-bootloader = <BOOT_BL_DOWNLOAD>;
+			mode-fastboot = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+		};
+	};
+
+	uart0: serial@ff030000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff030000 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 0>, <&dmac 1>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	i2s1_2ch: i2s@ff070000 {
+		compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff070000 0x0 0x1000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 18>, <&dmac 19>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck
+			     &i2s1_2ch_sdi &i2s1_2ch_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2_2ch: i2s@ff080000 {
+		compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff080000 0x0 0x1000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 20>, <&dmac 21>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck
+			     &i2s2_2ch_sdi &i2s2_2ch_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@ff131000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0xff131000 0 0x1000>,
+		      <0x0 0xff132000 0 0x2000>,
+		      <0x0 0xff134000 0 0x2000>,
+		      <0x0 0xff136000 0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	grf: syscon@ff140000 {
+		compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,px30-io-voltage-domain";
+			status = "disabled";
+		};
+
+		lvds: lvds {
+			compatible = "rockchip,px30-lvds";
+			phys = <&dsi_dphy>;
+			phy-names = "dphy";
+			rockchip,grf = <&grf>;
+			rockchip,output = "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					lvds_vopb_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vopb_out_lvds>;
+					};
+
+					lvds_vopl_in: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vopl_out_lvds>;
+					};
+				};
+			};
+		};
+	};
+
+	uart1: serial@ff158000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff158000 0x0 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 2>, <&dmac 3>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff160000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff160000 0x0 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 4>, <&dmac 5>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff168000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff168000 0x0 0x100>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 6>, <&dmac 7>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff170000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff170000 0x0 0x100>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 8>, <&dmac 9>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+		status = "disabled";
+	};
+
+	uart5: serial@ff178000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff178000 0x0 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 10>, <&dmac 11>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff180000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff180000 0x0 0x1000>;
+		clocks =  <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff190000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff190000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff1a0000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff1a0000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff1b0000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff1b0000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff1d0000 {
+		compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 12>, <&dmac 13>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff1d8000 {
+		compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 14>, <&dmac 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff1e0000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x0 0xff1e0000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT_NS>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff200000 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff200010 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff200020 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff200030 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ff208000 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ff208010 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ff208020 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@ff208030 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	rktimer: timer@ff210000 {
+		compatible = "rockchip,px30-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xff210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dmac: dmac@ff240000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff240000 0x0 0x4000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,px30-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <120000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_otp_gpio>;
+		pinctrl-1 = <&tsadc_otp_out>;
+		pinctrl-2 = <&tsadc_otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	saradc: saradc@ff288000 {
+		compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff288000 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	otp: nvmem@ff290000 {
+		compatible = "rockchip,px30-otp";
+		reg = <0x0 0xff290000 0x0 0x4000>;
+		clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
+			 <&cru PCLK_OTP_PHY>;
+		clock-names = "otp", "apb_pclk", "phy";
+		resets = <&cru SRST_OTP_PHY>;
+		reset-names = "phy";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Data cells */
+		cpu_id: id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		performance: performance@1e {
+			reg = <0x1e 0x1>;
+			bits = <4 3>;
+		};
+	};
+
+	cru: clock-controller@ff2b0000 {
+		compatible = "rockchip,px30-cru";
+		reg = <0x0 0xff2b0000 0x0 0x1000>;
+		clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+		clock-names = "xin24m", "gpll";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pmucru: clock-controller@ff2bc000 {
+		compatible = "rockchip,px30-pmucru";
+		reg = <0x0 0xff2bc000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	usb2phy_grf: syscon@ff2c0000 {
+		compatible = "rockchip,px30-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xff2c0000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2-phy@100 {
+			compatible = "rockchip,px30-usb2phy";
+			reg = <0x100 0x20>;
+			clocks = <&pmucru SCLK_USBPHY_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			clock-output-names = "usb480m_phy";
+			status = "disabled";
+
+			u2phy_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+	};
+
+	dsi_dphy: phy@ff2e0000 {
+		compatible = "rockchip,px30-dsi-dphy";
+		reg = <0x0 0xff2e0000 0x0 0x10000>;
+		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
+		clock-names = "ref", "pclk";
+		resets = <&cru SRST_MIPIDSIPHY_P>;
+		reset-names = "apb";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+	};
+
+	usb20_otg: usb@ff300000 {
+		compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff300000 0x0 0x40000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		g-use-dma;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff340000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff340000 0x0 0x10000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>;
+		clock-names = "usbhost";
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@ff350000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff350000 0x0 0x10000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>;
+		clock-names = "usbhost";
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff360000 {
+		compatible = "rockchip,px30-gmac";
+		reg = <0x0 0xff360000 0x0 0x10000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>,
+			 <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>,
+			 <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac", "clk_mac_speed";
+		rockchip,grf = <&grf>;
+		phy-mode = "rmii";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+		power-domains = <&power PX30_PD_GMAC>;
+		resets = <&cru SRST_GMAC_A>;
+		reset-names = "stmmaceth";
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@ff370000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff370000 0x0 0x4000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		power-domains = <&power PX30_PD_SDCARD>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@ff380000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff380000 0x0 0x4000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@ff390000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff390000 0x0 0x4000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	gpu: gpu@ff400000 {
+		compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+		reg = <0x0 0xff400000 0x0 0x4000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru SCLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power PX30_PD_GPU>;
+		status = "disabled";
+	};
+
+	dsi: dsi@ff450000 {
+		compatible = "rockchip,px30-mipi-dsi";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
+		phys = <&dsi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VO>;
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dsi>;
+				};
+
+				dsi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dsi>;
+				};
+			};
+		};
+	};
+
+	vopb: vop@ff460000 {
+		compatible = "rockchip,px30-vop-big";
+		reg = <0x0 0xff460000 0x0 0xefc>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>,
+			 <&cru HCLK_VOPB>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopb_mmu>;
+		power-domains = <&power PX30_PD_VO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopb>;
+			};
+
+			vopb_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopb_in>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff460f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff460f00 0x0 0x100>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopb_mmu";
+		clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff470000 {
+		compatible = "rockchip,px30-vop-lit";
+		reg = <0x0 0xff470000 0x0 0xefc>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>,
+			 <&cru HCLK_VOPL>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopl_mmu>;
+		power-domains = <&power PX30_PD_VO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopl>;
+			};
+
+			vopl_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopl_in>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff470f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff470f00 0x0 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopl_mmu";
+		clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	qos_gmac: qos@ff518000 {
+		compatible = "syscon";
+		reg = <0x0 0xff518000 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ff520000 {
+		compatible = "syscon";
+		reg = <0x0 0xff520000 0x0 0x20>;
+	};
+
+	qos_sdmmc: qos@ff52c000 {
+		compatible = "syscon";
+		reg = <0x0 0xff52c000 0x0 0x20>;
+	};
+
+	qos_emmc: qos@ff538000 {
+		compatible = "syscon";
+		reg = <0x0 0xff538000 0x0 0x20>;
+	};
+
+	qos_nand: qos@ff538080 {
+		compatible = "syscon";
+		reg = <0x0 0xff538080 0x0 0x20>;
+	};
+
+	qos_sdio: qos@ff538100 {
+		compatible = "syscon";
+		reg = <0x0 0xff538100 0x0 0x20>;
+	};
+
+	qos_sfc: qos@ff538180 {
+		compatible = "syscon";
+		reg = <0x0 0xff538180 0x0 0x20>;
+	};
+
+	qos_usb_host: qos@ff540000 {
+		compatible = "syscon";
+		reg = <0x0 0xff540000 0x0 0x20>;
+	};
+
+	qos_usb_otg: qos@ff540080 {
+		compatible = "syscon";
+		reg = <0x0 0xff540080 0x0 0x20>;
+	};
+
+	qos_isp_128: qos@ff548000 {
+		compatible = "syscon";
+		reg = <0x0 0xff548000 0x0 0x20>;
+	};
+
+	qos_isp_rd: qos@ff548080 {
+		compatible = "syscon";
+		reg = <0x0 0xff548080 0x0 0x20>;
+	};
+
+	qos_isp_wr: qos@ff548100 {
+		compatible = "syscon";
+		reg = <0x0 0xff548100 0x0 0x20>;
+	};
+
+	qos_isp_m1: qos@ff548180 {
+		compatible = "syscon";
+		reg = <0x0 0xff548180 0x0 0x20>;
+	};
+
+	qos_vip: qos@ff548200 {
+		compatible = "syscon";
+		reg = <0x0 0xff548200 0x0 0x20>;
+	};
+
+	qos_rga_rd: qos@ff550000 {
+		compatible = "syscon";
+		reg = <0x0 0xff550000 0x0 0x20>;
+	};
+
+	qos_rga_wr: qos@ff550080 {
+		compatible = "syscon";
+		reg = <0x0 0xff550080 0x0 0x20>;
+	};
+
+	qos_vop_m0: qos@ff550100 {
+		compatible = "syscon";
+		reg = <0x0 0xff550100 0x0 0x20>;
+	};
+
+	qos_vop_m1: qos@ff550180 {
+		compatible = "syscon";
+		reg = <0x0 0xff550180 0x0 0x20>;
+	};
+
+	qos_vpu: qos@ff558000 {
+		compatible = "syscon";
+		reg = <0x0 0xff558000 0x0 0x20>;
+	};
+
+	qos_vpu_r128: qos@ff558080 {
+		compatible = "syscon";
+		reg = <0x0 0xff558080 0x0 0x20>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,px30-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio0@ff040000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff040000 0x0 0x100>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0_PMU>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@ff250000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff250000 0x0 0x100>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@ff260000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff260000 0x0 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@ff270000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff270000 0x0 0x100>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_smt: pcfg-pull-none-smt {
+			bias-disable;
+			input-schmitt-enable;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<0 RK_PB0 1 &pcfg_pull_none_smt>,
+					<0 RK_PB1 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<0 RK_PC2 1 &pcfg_pull_none_smt>,
+					<0 RK_PC3 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none_smt>,
+					<2 RK_PC0 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins =
+					<1 RK_PB4 4 &pcfg_pull_none_smt>,
+					<1 RK_PB5 4 &pcfg_pull_none_smt>;
+			};
+		};
+
+		tsadc {
+			tsadc_otp_gpio: tsadc-otp-gpio {
+				rockchip,pins =
+					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			tsadc_otp_out: tsadc-otp-out {
+				rockchip,pins =
+					<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<0 RK_PB2 1 &pcfg_pull_up>,
+					<0 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<0 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<1 RK_PC1 1 &pcfg_pull_up>,
+					<1 RK_PC0 1 &pcfg_pull_up>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins =
+					<1 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2-m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins =
+					<1 RK_PD2 2 &pcfg_pull_up>,
+					<1 RK_PD3 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart2-m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_up>,
+					<2 RK_PB6 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart3-m0 {
+			uart3m0_xfer: uart3m0-xfer {
+				rockchip,pins =
+					<0 RK_PC0 2 &pcfg_pull_up>,
+					<0 RK_PC1 2 &pcfg_pull_up>;
+			};
+
+			uart3m0_cts: uart3m0-cts {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			uart3m0_rts: uart3m0-rts {
+				rockchip,pins =
+					<0 RK_PC3 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart3-m1 {
+			uart3m1_xfer: uart3m1-xfer {
+				rockchip,pins =
+					<1 RK_PB6 2 &pcfg_pull_up>,
+					<1 RK_PB7 2 &pcfg_pull_up>;
+			};
+
+			uart3m1_cts: uart3m1-cts {
+				rockchip,pins =
+					<1 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			uart3m1_rts: uart3m1-rts {
+				rockchip,pins =
+					<1 RK_PB5 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<1 RK_PD4 2 &pcfg_pull_up>,
+					<1 RK_PD5 2 &pcfg_pull_up>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins =
+					<1 RK_PD6 2 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins =
+					<1 RK_PD7 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart5 {
+			uart5_xfer: uart5-xfer {
+				rockchip,pins =
+					<3 RK_PA2 4 &pcfg_pull_up>,
+					<3 RK_PA1 4 &pcfg_pull_up>;
+			};
+
+			uart5_cts: uart5-cts {
+				rockchip,pins =
+					<3 RK_PA3 4 &pcfg_pull_none>;
+			};
+
+			uart5_rts: uart5-rts {
+				rockchip,pins =
+					<3 RK_PA5 4 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<1 RK_PB7 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_csn: spi0-csn {
+				rockchip,pins =
+					<1 RK_PB6 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_miso: spi0-miso {
+				rockchip,pins =
+					<1 RK_PB5 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_mosi: spi0-mosi {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_clk_hs: spi0-clk-hs {
+				rockchip,pins =
+					<1 RK_PB7 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi0_miso_hs: spi0-miso-hs {
+				rockchip,pins =
+					<1 RK_PB5 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi0_mosi_hs: spi0-mosi-hs {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<3 RK_PB7 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn0: spi1-csn0 {
+				rockchip,pins =
+					<3 RK_PB1 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn1: spi1-csn1 {
+				rockchip,pins =
+					<3 RK_PB2 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_miso: spi1-miso {
+				rockchip,pins =
+					<3 RK_PB6 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_mosi: spi1-mosi {
+				rockchip,pins =
+					<3 RK_PB4 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_clk_hs: spi1-clk-hs {
+				rockchip,pins =
+					<3 RK_PB7 4 &pcfg_pull_up_8ma>;
+			};
+
+			spi1_miso_hs: spi1-miso-hs {
+				rockchip,pins =
+					<3 RK_PB6 4 &pcfg_pull_up_8ma>;
+			};
+
+			spi1_mosi_hs: spi1-mosi-hs {
+				rockchip,pins =
+					<3 RK_PB4 4 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		pdm {
+			pdm_clk0m0: pdm-clk0m0 {
+				rockchip,pins =
+					<3 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			pdm_clk0m1: pdm-clk0m1 {
+				rockchip,pins =
+					<2 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			pdm_clk1: pdm-clk1 {
+				rockchip,pins =
+					<3 RK_PC7 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi0m0: pdm-sdi0m0 {
+				rockchip,pins =
+					<3 RK_PD3 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi0m1: pdm-sdi0m1 {
+				rockchip,pins =
+					<2 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi1: pdm-sdi1 {
+				rockchip,pins =
+					<3 RK_PD0 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi2: pdm-sdi2 {
+				rockchip,pins =
+					<3 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi3: pdm-sdi3 {
+				rockchip,pins =
+					<3 RK_PD2 2 &pcfg_pull_none>;
+			};
+
+			pdm_clk0m0_sleep: pdm-clk0m0-sleep {
+				rockchip,pins =
+					<3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_clk0m_sleep1: pdm-clk0m1-sleep {
+				rockchip,pins =
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_clk1_sleep: pdm-clk1-sleep {
+				rockchip,pins =
+					<3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi0m0_sleep: pdm-sdi0m0-sleep {
+				rockchip,pins =
+					<3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi0m1_sleep: pdm-sdi0m1-sleep {
+				rockchip,pins =
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi1_sleep: pdm-sdi1-sleep {
+				rockchip,pins =
+					<3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi2_sleep: pdm-sdi2-sleep {
+				rockchip,pins =
+					<3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi3_sleep: pdm-sdi3-sleep {
+				rockchip,pins =
+					<3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s0 {
+			i2s0_8ch_mclk: i2s0-8ch-mclk {
+				rockchip,pins =
+					<3 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sclktx: i2s0-8ch-sclktx {
+				rockchip,pins =
+					<3 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sclkrx: i2s0-8ch-sclkrx {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_lrcktx: i2s0-8ch-lrcktx {
+				rockchip,pins =
+					<3 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_lrckrx: i2s0-8ch-lrckrx {
+				rockchip,pins =
+					<3 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo0: i2s0-8ch-sdo0 {
+				rockchip,pins =
+					<3 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo1: i2s0-8ch-sdo1 {
+				rockchip,pins =
+					<3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo2: i2s0-8ch-sdo2 {
+				rockchip,pins =
+					<3 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo3: i2s0-8ch-sdo3 {
+				rockchip,pins =
+					<3 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi0: i2s0-8ch-sdi0 {
+				rockchip,pins =
+					<3 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi1: i2s0-8ch-sdi1 {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi2: i2s0-8ch-sdi2 {
+				rockchip,pins =
+					<3 RK_PB1 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi3: i2s0-8ch-sdi3 {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_2ch_mclk: i2s1-2ch-mclk {
+				rockchip,pins =
+					<2 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sclk: i2s1-2ch-sclk {
+				rockchip,pins =
+					<2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_lrck: i2s1-2ch-lrck {
+				rockchip,pins =
+					<2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sdi: i2s1-2ch-sdi {
+				rockchip,pins =
+					<2 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sdo: i2s1-2ch-sdo {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s2 {
+			i2s2_2ch_mclk: i2s2-2ch-mclk {
+				rockchip,pins =
+					<3 RK_PA1 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sclk: i2s2-2ch-sclk {
+				rockchip,pins =
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_lrck: i2s2-2ch-lrck {
+				rockchip,pins =
+					<3 RK_PA3 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sdi: i2s2-2ch-sdi {
+				rockchip,pins =
+					<3 RK_PA5 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sdo: i2s2-2ch-sdo {
+				rockchip,pins =
+					<3 RK_PA7 2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<1 RK_PD6 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<1 RK_PD7 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_det: sdmmc-det {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<1 RK_PD2 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<1 RK_PD2 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD3 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD4 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD5 1 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins =
+					<1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins =
+					<1 RK_PC4 1 &pcfg_pull_up>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins =
+					<1 RK_PC6 1 &pcfg_pull_up>,
+					<1 RK_PC7 1 &pcfg_pull_up>,
+					<1 RK_PD0 1 &pcfg_pull_up>,
+					<1 RK_PD1 1 &pcfg_pull_up>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_none_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_rstnout: emmc-rstnout {
+				rockchip,pins =
+					<1 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA3 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA3 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA4 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA5 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA6 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA7 2 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		flash {
+			flash_cs0: flash-cs0 {
+				rockchip,pins =
+					<1 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy: flash-rdy {
+				rockchip,pins =
+					<1 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			flash_dqs: flash-dqs {
+				rockchip,pins =
+					<1 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			flash_ale: flash-ale {
+				rockchip,pins =
+					<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			flash_cle: flash-cle {
+				rockchip,pins =
+					<1 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn: flash-wrn {
+				rockchip,pins =
+					<1 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			flash_csl: flash-csl {
+				rockchip,pins =
+					<1 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn: flash-rdn {
+				rockchip,pins =
+					<1 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins =
+					<1 RK_PA0 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA1 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA2 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA3 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA4 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA5 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA6 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA7 1 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		lcdc {
+			lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
+				rockchip,pins =
+					<3 RK_PA0 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin {
+				rockchip,pins =
+					<3 RK_PA1 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin {
+				rockchip,pins =
+					<3 RK_PA2 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin {
+				rockchip,pins =
+					<3 RK_PA3 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+					<3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+					<3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+					<3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+					<3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+					<3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+			};
+
+			lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+			};
+
+			lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+			};
+
+			lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+					<3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+					<3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+					<3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+					<3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+					<3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+			};
+
+			lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+			};
+
+			lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<2 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins =
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm4 {
+			pwm4_pin: pwm4-pin {
+				rockchip,pins =
+					<3 RK_PC2 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm5 {
+			pwm5_pin: pwm5-pin {
+				rockchip,pins =
+					<3 RK_PC3 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm6 {
+			pwm6_pin: pwm6-pin {
+				rockchip,pins =
+					<3 RK_PC4 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm7 {
+			pwm7_pin: pwm7-pin {
+				rockchip,pins =
+					<3 RK_PC5 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					<2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */
+					<2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */
+					<2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */
+					<2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */
+					<2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */
+					<2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */
+					<2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */
+					<2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */
+					<2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */
+			};
+
+			mac_refclk_12ma: mac-refclk-12ma {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none_12ma>;
+			};
+
+			mac_refclk: mac-refclk {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>;
+			};
+		};
+
+		cif-m0 {
+			cif_clkout_m0: cif-clkout-m0 {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			dvp_d2d9_m0: dvp-d2d9-m0 {
+				rockchip,pins =
+					<2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */
+					<2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */
+					<2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */
+					<2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */
+					<2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */
+					<2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */
+					<2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */
+					<2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */
+					<2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */
+					<2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */
+					<2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */
+					<2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */
+			};
+
+			dvp_d0d1_m0: dvp-d0d1-m0 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */
+					<2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */
+			};
+
+			dvp_d10d11_m0:d10-d11-m0 {
+				rockchip,pins =
+					<2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */
+					<2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */
+			};
+		};
+
+		cif-m1 {
+			cif_clkout_m1: cif-clkout-m1 {
+				rockchip,pins =
+					<3 RK_PD0 3 &pcfg_pull_none>;
+			};
+
+			dvp_d2d9_m1: dvp-d2d9-m1 {
+				rockchip,pins =
+					<3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */
+					<3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */
+					<3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */
+					<3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */
+					<3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */
+					<3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */
+					<3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */
+					<3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */
+					<3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */
+					<3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */
+					<3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */
+					<3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */
+			};
+
+			dvp_d0d1_m1: dvp-d0d1-m1 {
+				rockchip,pins =
+					<3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */
+					<3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */
+			};
+
+			dvp_d10d11_m1:d10-d11-m1 {
+				rockchip,pins =
+					<3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */
+					<3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */
+			};
+		};
+
+		isp {
+			isp_prelight: isp-prelight {
+				rockchip,pins =
+					<3 RK_PD1 4 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qcom-ipq4019.dtsi b/roms/u-boot/arch/arm/dts/qcom-ipq4019.dtsi
new file mode 100644
index 000000000..7a52ea2c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qcom-ipq4019.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ */
+
+ /dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-snapdragon.h>
+#include <dt-bindings/clock/qcom,ipq4019-gcc.h>
+#include <dt-bindings/reset/qcom,ipq4019-reset.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Qualcomm Technologies, Inc. IPQ4019";
+	compatible = "qcom,ipq4019";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		spi0 = &blsp1_spi1;
+	};
+
+	reserved-memory {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+
+		smem_mem: smem_region: smem@87e00000 {
+			reg = <0x87e00000 0x080000>;
+			no-map;
+		};
+
+		tz@87e80000 {
+			reg = <0x87e80000 0x180000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-ipq4019";
+			reg = <0x1800000 0x60000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			u-boot,dm-pre-reloc;
+		};
+
+		rng: rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x22000 0x140>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			status = "disabled";
+		};
+
+		reset: gcc-reset@1800000 {
+			compatible = "qcom,gcc-reset-ipq4019";
+			reg = <0x1800000 0x60000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			u-boot,dm-pre-reloc;
+		};
+
+		pinctrl: qcom,tlmm@1000000 {
+			compatible = "qcom,tlmm-ipq4019";
+			reg = <0x1000000 0x300000>;
+			u-boot,dm-pre-reloc;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			clock = <&gcc GCC_BLSP1_UART1_APPS_CLK>;
+			bit-rate = <0xFF>;
+			status = "disabled";
+			u-boot,dm-pre-reloc;
+		};
+
+		soc_gpios: pinctrl@1000000 {
+			compatible = "qcom,ipq4019-pinctrl";
+			reg = <0x1000000 0x300000>;
+			gpio-controller;
+			gpio-count = <100>;
+			gpio-bank-name="soc";
+			#gpio-cells = <2>;
+			u-boot,dm-pre-reloc;
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x78b5000 0x600>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			u-boot,dm-pre-reloc;
+		};
+
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq4019-mdio";
+			reg = <0x90000 0x64>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethphy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		usb3_ss_phy: ssphy@9a000 {
+			compatible = "qcom,usb-ss-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0x9a000 0x800>;
+			reg-names = "phy_base";
+			resets = <&reset USB3_UNIPHY_PHY_ARES>;
+			reset-names = "por_rst";
+			status = "disabled";
+		};
+
+		usb3_hs_phy: hsphy@a6000 {
+			compatible = "qcom,usb-hs-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0xa6000 0x40>;
+			reg-names = "phy_base";
+			resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>;
+			reset-names = "por_rst", "srif_rst";
+			status = "disabled";
+		};
+
+		usb3: usb3@8af8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x8af8800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc GCC_USB3_MASTER_CLK>,
+				 <&gcc GCC_USB3_SLEEP_CLK>,
+				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+			clock-names = "master", "sleep", "mock_utmi";
+			ranges;
+			status = "disabled";
+
+			dwc3@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xf8000>;
+				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				maximum-speed = "super-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		usb2_hs_phy: hsphy@a8000 {
+			compatible = "qcom,usb-hs-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0xa8000 0x40>;
+			reg-names = "phy_base";
+			resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>;
+			reset-names = "por_rst", "srif_rst";
+			status = "disabled";
+		};
+
+		usb2: usb2@60f8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x60f8800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc GCC_USB2_MASTER_CLK>,
+				 <&gcc GCC_USB2_SLEEP_CLK>,
+				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+			clock-names = "master", "sleep", "mock_utmi";
+			ranges;
+			status = "disabled";
+
+			dwc3@6000000 {
+				compatible = "snps,dwc3";
+				reg = <0x6000000 0xf8000>;
+				phys = <&usb2_hs_phy>;
+				phy-names = "usb2-phy";
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0-10g-0.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 000000000..8f4776e88
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 10g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+		pcsphy-handle = <&pcsphy6>;
+		status = "disabled";
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+
+		pcsphy6: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0-10g-1.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 000000000..b5eb22f6a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 10g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+		pcsphy-handle = <&pcsphy7>;
+		status = "disabled";
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+
+		pcsphy7: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-0.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 000000000..4264d4770
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
+		status = "disabled";
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-1.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 000000000..d60f8c77a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
+		status = "disabled";
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-2.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 000000000..7c5edc01d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #2 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy2>;
+		status = "disabled";
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+
+		pcsphy2: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-3.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 000000000..2d2de58c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy3>;
+		status = "disabled";
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+
+		pcsphy3: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-4.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 000000000..f5a73dc73
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #4 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy4>;
+		status = "disabled";
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+
+		pcsphy4: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-5.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 000000000..baa575119
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #5 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy5>;
+		status = "disabled";
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+
+		pcsphy5: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/qoriq-fman3-0.dtsi b/roms/u-boot/arch/arm/dts/qoriq-fman3-0.dtsi
new file mode 100644
index 000000000..82fe796f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/qoriq-fman3-0.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ *
+ */
+
+fman0: fman@1a00000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0x0 0x0 0x1a00000 0xfe000>;
+	reg = <0x0 0x1a00000 0x0 0xfe000>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+	ptimer-handle = <&ptp_timer0>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+};
+
+ptp_timer0: ptp-timer@1afe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x0 0x1afe000 0x0 0x1000>;
+	clocks = <&clockgen 3 0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r7s72100-gr-peach-u-boot.dts b/roms/u-boot/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
new file mode 100644
index 000000000..f48121a9a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the GR Peach board
+ *
+ * Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r7s72100-gr-peach.dts"
+
+/ {
+	aliases {
+		spi0 = &rpc;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+
+	leds {
+		led1 {
+			label = "peach:bottom:red";
+		};
+
+		led-red {
+			label = "peach:tri:red";
+			gpios = <&port6 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "peach:tri:green";
+			gpios = <&port6 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "peach:tri:blue";
+			gpios = <&port6 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usbhs0_vbus: regulator-usbhs0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhs0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&port4 1 GPIO_ACTIVE_LOW>;
+	};
+
+
+	rpc: rpc@ee200000 {
+		compatible = "renesas,rpc-r7s72100", "renesas,rpc";
+		reg = <0x3fefa000 0x100>, <0x18000000 0x08000000>;
+		bank-width = <2>;
+		num-cs = <1>;
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		flash0: spi-flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <50000000>;
+			spi-tx-bus-width = <1>;
+			spi-rx-bus-width = <1>;
+			reg = <0>;
+			status = "okay";
+		};
+	};
+};
+
+&ostm0 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&scif2 {
+	u-boot,dm-pre-reloc;
+	clock = <66666666>;	/* ToDo: Replace by DM clock driver */
+};
+
+&scif2_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&usbhs0 {
+	vbus-supply = <&reg_usbhs0_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r7s72100-gr-peach.dts b/roms/u-boot/arch/arm/dts/r7s72100-gr-peach.dts
new file mode 100644
index 000000000..fe1a4aa4d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r7s72100-gr-peach.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the GR-Peach board
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Renesas Electronics
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "GR-Peach";
+	compatible = "renesas,gr-peach", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/mtdblock0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x00a00000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	flash@18000000 {
+		compatible = "mtd-rom";
+		probe-type = "map_rom";
+		reg = <0x18000000 0x00800000>;
+		bank-width = <4>;
+		device-width = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		rootfs@600000 {
+			label = "rootfs";
+			reg = <0x00600000 0x00200000>;
+		};
+	};
+
+	leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&port6 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	scif2_pins: serial2 {
+		/* P6_2 as RxD2; P6_3 as TxD2 */
+		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
+	};
+
+	ether_pins: ether {
+		/* Ethernet on Ports 1,3,5,10 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL   */
+			 <RZA1_PINMUX(3, 0, 2)>,  /* P3_0 = ET_TXCLK  */
+			 <RZA1_PINMUX(3, 3, 2)>,  /* P3_3 = ET_MDIO   */
+			 <RZA1_PINMUX(3, 4, 2)>,  /* P3_4 = ET_RXCLK  */
+			 <RZA1_PINMUX(3, 5, 2)>,  /* P3_5 = ET_RXER   */
+			 <RZA1_PINMUX(3, 6, 2)>,  /* P3_6 = ET_RXDV   */
+			 <RZA1_PINMUX(5, 9, 2)>,  /* P5_9 = ET_MDC    */
+			 <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER  */
+			 <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN  */
+			 <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS   */
+			 <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0  */
+			 <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1  */
+			 <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2  */
+			 <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3  */
+			 <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0  */
+			 <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1  */
+			 <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
+			 <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13333000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+
+	status = "okay";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+
+		reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <5>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r7s72100.dtsi b/roms/u-boot/arch/arm/dts/r7s72100.dtsi
new file mode 100644
index 000000000..2211f88ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r7s72100.dtsi
@@ -0,0 +1,705 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ */
+
+#include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r7s72100";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
+	/* Fixed factor clocks */
+	b_clk: b {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <400000000>;
+			clocks = <&cpg_clocks R7S72100_CLK_I>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* External clocks */
+	extal_clk: extal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board */
+		clock-frequency = <0>;
+	};
+
+	p0_clk: p0 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <12>;
+	};
+
+	p1_clk: p1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&gic GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rtc_x1_clk: rtc_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board to 32678 */
+		clock-frequency = <0>;
+	};
+
+	rtc_x3_clk: rtc_x3 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board to 4000000 */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		L2: cache-controller@3ffff000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x3ffff000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			arm,early-bresp-disable;
+			arm,full-line-zero-disable;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		scif0: serial@e8007000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8007000 64>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif1: serial@e8007800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8007800 64>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif2: serial@e8008000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8008000 64>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif3: serial@e8008800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8008800 64>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif4: serial@e8009000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8009000 64>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif5: serial@e8009800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8009800 64>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif6: serial@e800a000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe800a000 64>;
+			interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif7: serial@e800a800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe800a800 64>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		spi0: spi@e800c800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800c800 0x24>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@e800d000 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800d000 0x24>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@e800d800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800d800 0x24>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@e800e000 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800e000 0x24>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@e800e800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800e800 0x24>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usbhs0: usb@e8010000 {
+			compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
+			reg = <0xe8010000 0x1a0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_USB0>;
+			renesas,buswait = <4>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		usbhs1: usb@e8207000 {
+			compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
+			reg = <0xe8207000 0x1a0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_USB1>;
+			renesas,buswait = <4>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		mmcif: mmc@e804c800 {
+			compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
+			reg = <0xe804c800 0x80>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
+			power-domains = <&cpg_clocks>;
+			reg-io-width = <4>;
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhi0: sd@e804e000 {
+			compatible = "renesas,sdhi-r7s72100";
+			reg = <0xe804e000 0x100>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
+				 <&mstp12_clks R7S72100_CLK_SDHI01>;
+			clock-names = "core", "cd";
+			power-domains = <&cpg_clocks>;
+			cap-sd-highspeed;
+			cap-sdio-irq;
+			status = "disabled";
+		};
+
+		sdhi1: sd@e804e800 {
+			compatible = "renesas,sdhi-r7s72100";
+			reg = <0xe804e800 0x100>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
+				 <&mstp12_clks R7S72100_CLK_SDHI11>;
+			clock-names = "core", "cd";
+			power-domains = <&cpg_clocks>;
+			cap-sd-highspeed;
+			cap-sdio-irq;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8201000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8201000 0x1000>,
+				<0xe8202000 0x1000>;
+		};
+
+		ether: ethernet@e8203000 {
+			compatible = "renesas,ether-r7s72100";
+			reg = <0xe8203000 0x800>,
+			      <0xe8204800 0x200>;
+			interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_ETHER>;
+			power-domains = <&cpg_clocks>;
+			phy-mode = "mii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ceu: camera@e8210000 {
+			reg = <0xe8210000 0x3000>;
+			compatible = "renesas,r7s72100-ceu";
+			interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		wdt: watchdog@fcfe0000 {
+			compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
+			reg = <0xfcfe0000 0x6>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&p0_clk>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@fcfe0000 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-cpg-clocks",
+				     "renesas,rz-cpg-clocks";
+			reg = <0xfcfe0000 0x18>;
+			clocks = <&extal_clk>, <&usb_x1_clk>;
+			clock-output-names = "pll", "i", "g";
+			#power-domain-cells = <0>;
+		};
+
+		/* MSTP clocks */
+		mstp3_clks: mstp3_clks@fcfe0420 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0420 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_MTU2>;
+			clock-output-names = "mtu2";
+		};
+
+		mstp4_clks: mstp4_clks@fcfe0424 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0424 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
+				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
+			>;
+			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
+		};
+
+		mstp5_clks: mstp5_clks@fcfe0428 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0428 4>;
+			clocks = <&p0_clk>, <&p0_clk>;
+			clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>;
+			clock-output-names = "ostm0", "ostm1";
+		};
+
+		mstp6_clks: mstp6_clks@fcfe042c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe042c 4>;
+			clocks = <&b_clk>, <&p0_clk>;
+			clock-indices = <R7S72100_CLK_CEU R7S72100_CLK_RTC>;
+			clock-output-names = "ceu", "rtc";
+		};
+
+		mstp7_clks: mstp7_clks@fcfe0430 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0430 4>;
+			clocks = <&b_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <R7S72100_CLK_ETHER R7S72100_CLK_USB0 R7S72100_CLK_USB1>;
+			clock-output-names = "ether", "usb0", "usb1";
+		};
+
+		mstp8_clks: mstp8_clks@fcfe0434 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0434 4>;
+			clocks = <&p1_clk>;
+			clock-indices = <R7S72100_CLK_MMCIF>;
+			clock-output-names = "mmcif";
+		};
+
+		mstp9_clks: mstp9_clks@fcfe0438 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0438 4>;
+			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
+			clock-indices = <
+				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+			>;
+			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
+		};
+
+		mstp10_clks: mstp10_clks@fcfe043c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe043c 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
+				R7S72100_CLK_SPI4
+			>;
+			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
+		};
+		mstp12_clks: mstp12_clks@fcfe0444 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0444 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SDHI00 R7S72100_CLK_SDHI01
+				R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
+			>;
+			clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11";
+		};
+
+		pinctrl: pin-controller@fcfe3000 {
+			compatible = "renesas,r7s72100-ports";
+
+			reg = <0xfcfe3000 0x4230>;
+
+			port0: gpio-0 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 0 6>;
+			};
+
+			port1: gpio-1 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			port2: gpio-2 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			port3: gpio-3 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			port4: gpio-4 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			port5: gpio-5 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 80 11>;
+			};
+
+			port6: gpio-6 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			port7: gpio-7 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			port8: gpio-8 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			port9: gpio-9 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 144 8>;
+			};
+
+			port10: gpio-10 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 160 16>;
+			};
+
+			port11: gpio-11 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 176 16>;
+			};
+		};
+
+		ostm0: timer@fcfec000 {
+			compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+			reg = <0xfcfec000 0x30>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		ostm1: timer@fcfec400 {
+			compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+			reg = <0xfcfec400 0x30>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mstp5_clks R7S72100_CLK_OSTM1>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@fcfee000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee000 0x44>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@fcfee400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee400 0x44>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@fcfee800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee800 0x44>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fcfeec00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfeec00 0x44>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		mtu2: timer@fcff0000 {
+			compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+			reg = <0xfcff0000 0x400>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tgi0a";
+			clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		rtc: rtc@fcff1000 {
+			compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
+			reg = <0xfcff1000 0x2e>;
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "alarm", "period", "carry";
+			clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
+				 <&rtc_x3_clk>, <&extal_clk>;
+			clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+	};
+
+	usb_x1_clk: usb_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board */
+		clock-frequency = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi
new file mode 100644
index 000000000..a0c0a7f35
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&cpg {
+	u-boot,dm-pre-reloc;
+};
+
+&extal_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&prr {
+	u-boot,dm-pre-reloc;
+};
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&sdhi0 {
+	/delete-property/ cd-gpios;
+};
+
+&sdhi2 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts b/roms/u-boot/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
new file mode 100644
index 000000000..501cb05da
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774a1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks RZ/G2M Development Kit";
+	compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+/* Reference versaclock instead of audio_clk_a */
+&rcar_sound {
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&versaclock6_bb 4>, <&audio_clk_b>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts b/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
new file mode 100644
index 000000000..f0e4a1f25
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
new file mode 100644
index 000000000..b735e9722
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Hihope RZ/G2M board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "r8a774a1-u-boot.dtsi"
+
+&gpio3 {
+	bt_reg_on{
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "bt-reg-on";
+	};
+};
+
+&gpio4 {
+	wlan_reg_on{
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "wlan-reg-on";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m.dts b/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
new file mode 100644
index 000000000..a574c85a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774a1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a774a1-u-boot.dtsi
new file mode 100644
index 000000000..f826c41c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774a1-u-boot.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RZ/G2 R8A774A1 SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi40;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvd2;
+/delete-node/ &fcpvi0;
+/delete-node/ &hdmi0;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sdhi2;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspb;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspd2;
+/delete-node/ &vspi0;
+
+/ {
+	/delete-node/ hdmi0-out;
+};
+
+/ {
+	soc {
+		/delete-node/ fdp1@fe940000;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774a1.dtsi b/roms/u-boot/arch/arm/dts/r8a774a1.dtsi
new file mode 100644
index 000000000..d64fb8b1b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774a1.dtsi
@@ -0,0 +1,2861 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774a1 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774a1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774a1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774A1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774a1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c_dvfs;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774A1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774A1_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774a1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774a1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774a1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774a1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x0bb0>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774a1-rst";
+			reg = <0 0xe6160000 0 0x018c>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774a1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774a1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774a1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774a1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774a1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774a1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774a1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774a1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774a1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774a1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible =  "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+			reg =	<0 0xec500000 0 0x1000>, /* SCU */
+				<0 0xec5a0000 0 0x100>,  /* ADG */
+				<0 0xec540000 0 0x1000>, /* SSIU */
+				<0 0xec541000 0 0x280>,  /* SSI */
+				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774a1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774a1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774a1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774a1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774a1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			clock-names = "rpc";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774a1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774a1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774a1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774a1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774a1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774a1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774a1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774A1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774a1";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774a1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi
new file mode 100644
index 000000000..a0c0a7f35
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&cpg {
+	u-boot,dm-pre-reloc;
+};
+
+&extal_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&prr {
+	u-boot,dm-pre-reloc;
+};
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&sdhi0 {
+	/delete-property/ cd-gpios;
+};
+
+&sdhi2 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774b1-beacon-rzg2n-kit.dts b/roms/u-boot/arch/arm/dts/r8a774b1-beacon-rzg2n-kit.dts
new file mode 100644
index 000000000..71763f440
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774b1-beacon-rzg2n-kit.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774b1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon Embedded Works RZ/G2N Development Kit";
+	compatible =	"beacon,beacon-rzg2n", "renesas,r8a774b1";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		serial6 = &scif4;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		<&cpg CPG_MOD 723>,
+		<&cpg CPG_MOD 721>,
+		<&versaclock5 1>,
+		<&x302_clk>,
+		<&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		"dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+/* Reference versaclock instead of audio_clk_a */
+&rcar_sound {
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&versaclock6_bb 4>, <&audio_clk_b>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A774B1_CLK_S0D4>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n-ex.dts b/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n-ex.dts
new file mode 100644
index 000000000..60d7c8ade
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
+		     "renesas,r8a774b1";
+};
+
+/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n-u-boot.dts
new file mode 100644
index 000000000..0bdc6909b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n-u-boot.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Hihope RZ/G2N board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-ex.dts"
+#include "r8a774b1-u-boot.dtsi"
+
+&gpio3 {
+	bt_reg_on{
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "bt-reg-on";
+	};
+};
+
+&gpio4 {
+	wlan_reg_on{
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "wlan-reg-on";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n.dts b/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n.dts
new file mode 100644
index 000000000..f1883cbd1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774b1-hihope-rzg2n.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N main board Rev.3.0/4.0
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N main board based on r8a774b1";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774b1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a774b1-u-boot.dtsi
new file mode 100644
index 000000000..6fab78e77
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774b1-u-boot.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RZ/G2 R8A774B1 SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi40;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvi0;
+/delete-node/ &hdmi0;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sdhi2;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspb;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspi0;
+
+/ {
+	/delete-node/ hdmi0-out;
+};
+
+/ {
+	soc {
+		/delete-node/ fdp1@fe940000;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774b1.dtsi b/roms/u-boot/arch/arm/dts/r8a774b1.dtsi
new file mode 100644
index 000000000..5b05474dc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774b1.dtsi
@@ -0,0 +1,2702 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774b1 SoC
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774b1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774b1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774B1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774b1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774B1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774B1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774B1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774b1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774b1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774b1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774b1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774b1-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774b1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774b1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774b1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774b1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774b1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774b1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774b1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774b1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774b1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774B1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774b1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774b1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774b1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774b1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible =  "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774b1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774b1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774b1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774b1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774b1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			clock-names = "rpc";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a774b1",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774b1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774b1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774b1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774b1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774b1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774b1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774b1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774B1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774b1";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774b1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <2439>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774c0-cat874.dts b/roms/u-boot/arch/arm/dts/r8a774c0-cat874.dts
new file mode 100644
index 000000000..676fdef9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774c0-cat874.dts
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774c0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/display/tda998x.h>
+
+/ {
+	model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
+	compatible = "si-linux,cat874", "renesas,r8a774c0";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&tda19988_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+		};
+
+		led1 {
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+
+		led2 {
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+
+		led3 {
+			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "CAT874 HDMI sound";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	wlan_en_reg: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x13_clk: x13 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x13_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&tda19988_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hscif2 {
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		video-ports = <0x234501>;
+
+		#sound-dai-cells = <0>;
+		audio-ports = <TDA998x_I2S 0x03>;
+		clocks = <&rcar_sound 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				tda19988_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				tda19988_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@32 {
+		compatible = "epson,rx8571";
+		reg = <0x32>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	/* Map all possible DDR as inbound ranges */
+	dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+};
+
+&pfc {
+	du_pins: du {
+		groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp",
+			 "du_clk_in_0";
+		function = "du";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a", "hscif2_ctrl_a";
+		function = "hscif2";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1_b";
+		function = "i2c1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clkout1_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data";
+		function = "ssi";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30", "usb30_id";
+		function = "usb30";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi3 {
+	status = "okay";
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&usb2_phy0 {
+	renesas,no-otg-pins;
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774c0-ek874-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a774c0-ek874-u-boot.dts
new file mode 100644
index 000000000..8fa6d8074
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774c0-ek874-u-boot.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Hihope board
+ *
+ * Copyright (C) 2021 Renesas Electronisc Corporation
+ */
+
+#include "r8a774c0-ek874.dts"
+#include "r8a774c0-u-boot.dtsi"
+
+/ {
+	aliases {
+		spi0 = &rpc;
+	};
+};
+
+&rpc {
+	num-cs = <1>;
+	status = "okay";
+	spi-max-frequency = <50000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash0: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25m512jv", "spi-flash", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774c0-ek874.dts b/roms/u-boot/arch/arm/dts/r8a774c0-ek874.dts
new file mode 100644
index 000000000..d3ab28ba3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774c0-ek874.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874)
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-cat874.dts"
+#include "cat875.dtsi"
+
+/ {
+	model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875)";
+	compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774c0-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a774c0-u-boot.dtsi
new file mode 100644
index 000000000..af1c86171
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774c0-u-boot.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on R8A774C0 SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ *
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+/ {
+	soc {
+		rpc: rpc@ee200000 {
+			compatible = "renesas,rcar-gen3-rpc", "renesas,rpc-r8a774c0";
+			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+			clocks = <&cpg CPG_MOD 917>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+	};
+};
+
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &pwm0;
+/delete-node/ &pwm1;
+/delete-node/ &pwm2;
+/delete-node/ &pwm3;
+/delete-node/ &pwm4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &rcar_sound;
+/delete-node/ &audma0;
+/delete-node/ &sdhi1;
+/delete-node/ &sdhi3;
+/delete-node/ &vspb0;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspi0;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvi0;
+/delete-node/ &csi40;
+/delete-node/ &du;
+/delete-node/ &lvds0;
+/delete-node/ &lvds1;
+/delete-node/ &hdmi_con_out;
+/delete-node/ &sound;
+/delete-node/ &tda19988;
diff --git a/roms/u-boot/arch/arm/dts/r8a774c0.dtsi b/roms/u-boot/arch/arm/dts/r8a774c0.dtsi
new file mode 100644
index 000000000..2bdd571bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774c0.dtsi
@@ -0,0 +1,1979 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2E (R8A774C0) SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a774c0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a774c0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster1_opp: opp_table10 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774C0_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774C0_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774c0-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 11>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 20>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774c0";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774c0-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774c0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774c0-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774c0-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a774c0";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774c0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6690000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6690000 0 0x40>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1003>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 1003>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774c0";
+			reg = <0 0xe60b0000 0 0x15>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774c0",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774C0_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774c0",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774c0",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774c0",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774c0-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x5b>, <&dmac0 0x5a>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774c0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint= <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774c0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint= <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774c0",
+				     "renesas,rcar_sound-gen3";
+			reg =	<0 0xec500000 0 0x1000>, /* SCU */
+				<0 0xec5a0000 0 0x100>,  /* ADG */
+				<0 0xec540000 0 0x1000>, /* SSIU */
+				<0 0xec541000 0 0x280>,  /* SSI */
+				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774C0_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma0 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma0 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma0 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma0 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774c0",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774c0-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774c0",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774c0",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774c0-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vspb0: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 626>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 631>;
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774c0-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774c0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a774c0-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a774c0-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds1_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi
new file mode 100644
index 000000000..eef200af2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&cpg {
+	u-boot,dm-pre-reloc;
+};
+
+&extal_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&prr {
+	u-boot,dm-pre-reloc;
+};
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&sdhi0 {
+	/delete-property/ cd-gpios;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&sdhi2 {
+	status = "disabled";
+};
+
+&sdhi3 {
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774e1-beacon-rzg2h-kit.dts b/roms/u-boot/arch/arm/dts/r8a774e1-beacon-rzg2h-kit.dts
new file mode 100644
index 000000000..273f062f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774e1-beacon-rzg2h-kit.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774e1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon Embedded Works RZ/G2H Development Kit";
+	compatible =	"beacon,beacon-rzg2h", "renesas,r8a774e1";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		serial6 = &scif4;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		<&cpg CPG_MOD 723>,
+		<&cpg CPG_MOD 721>,
+		<&versaclock5 1>,
+		<&x302_clk>,
+		<&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		"dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+/* Reference versaclock instead of audio_clk_a */
+&rcar_sound {
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&versaclock6_bb 4>, <&audio_clk_b>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A774E1_CLK_S0D4>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h-ex.dts b/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h-ex.dts
new file mode 100644
index 000000000..812995939
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h-ex.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h",
+		     "renesas,r8a774e1";
+};
+
+/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
+&sata {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h-u-boot.dts
new file mode 100644
index 000000000..03a17bac7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h-u-boot.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Hihope RZ/G2H board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h-ex.dts"
+#include "r8a774e1-u-boot.dtsi"
+
+&gpio3 {
+	bt_reg_on{
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "bt-reg-on";
+	};
+};
+
+&gpio4 {
+	wlan_reg_on{
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "wlan-reg-on";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h.dts b/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h.dts
new file mode 100644
index 000000000..9525d5ed6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774e1-hihope-rzg2h.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774e1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H main board based on r8a774e1";
+	compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774e1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a774e1-u-boot.dtsi
new file mode 100644
index 000000000..74758dfed
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774e1-u-boot.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RZ/G2 R8A774E1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi40;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpf1;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvb1;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvi0;
+/delete-node/ &fcpvi1;
+/delete-node/ &hdmi0;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sdhi2;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspbc;
+/delete-node/ &vspbd;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspi0;
+/delete-node/ &vspi1;
+
+/ {
+	/delete-node/ hdmi0-out;
+};
+
+/ {
+	soc {
+		/delete-node/ fdp1@fe940000;
+		/delete-node/ fdp1@fe944000;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a774e1.dtsi b/roms/u-boot/arch/arm/dts/r8a774e1.dtsi
new file mode 100644
index 000000000..8eb006cbd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a774e1.dtsi
@@ -0,0 +1,2984 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774e1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774e1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774e1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774E1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774e1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+				core2 {
+					cpu = <&a57_2>;
+				};
+				core3 {
+					cpu = <&a57_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU2>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU3>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774e1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774e1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774e1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774e1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774e1-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774e1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774e1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774e1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774e1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774e1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774e1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774e1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774e1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774e1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+				 <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+				 <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+				 <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+				 <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+				 <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+				 <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+				 <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+				 <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+				 <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+				 <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+				 <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+				 <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+				 <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+				 <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp0: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv2: iommu@fd960000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv3: iommu@fd970000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd970000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc1: iommu@fe6f0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6f0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 13>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@febe0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebe0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp1: iommu@fe980000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe980000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 17>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774e1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774e1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible =  "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>,
+				 <&ipmmu_mp0 2>, <&ipmmu_mp0 3>,
+				 <&ipmmu_mp0 4>, <&ipmmu_mp0 5>,
+				 <&ipmmu_mp0 6>, <&ipmmu_mp0 7>,
+				 <&ipmmu_mp0 8>, <&ipmmu_mp0 9>,
+				 <&ipmmu_mp0 10>, <&ipmmu_mp0 11>,
+				 <&ipmmu_mp0 12>, <&ipmmu_mp0 13>,
+				 <&ipmmu_mp0 14>, <&ipmmu_mp0 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>,
+				 <&ipmmu_mp0 18>, <&ipmmu_mp0 19>,
+				 <&ipmmu_mp0 20>, <&ipmmu_mp0 21>,
+				 <&ipmmu_mp0 22>, <&ipmmu_mp0 23>,
+				 <&ipmmu_mp0 24>, <&ipmmu_mp0 25>,
+				 <&ipmmu_mp0 26>, <&ipmmu_mp0 27>,
+				 <&ipmmu_mp0 28>, <&ipmmu_mp0 29>,
+				 <&ipmmu_mp0 30>, <&ipmmu_mp0 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774e1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774e1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774e1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774e1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774e1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			clock-names = "rpc";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a774e1",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			iommus = <&ipmmu_hc 2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774e1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774e1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774e1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774e1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 624>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 630>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 118>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 614>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 606>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 610>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774e1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774e1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774e1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774E1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774e1";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774e1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <6313>;
+
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7790-lager-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a7790-lager-u-boot.dts
new file mode 100644
index 000000000..fecf7e77a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7790-lager-u-boot.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Lager board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a7790-lager.dts"
+#include "r8a7790-u-boot.dtsi"
+
+&scif0 {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	flash@0 {
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7790-lager.dts b/roms/u-boot/arch/arm/dts/r8a7790-lager.dts
new file mode 100644
index 000000000..097fd9317
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7790-lager.dts
@@ -0,0 +1,936 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Lager board
+ *
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2015-2016 Renesas Electronics Corporation
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lager";
+	compatible = "renesas,lager", "renesas,r8a7790";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scifa1;
+		i2c8 = &gpioi2c1;
+		i2c9 = &gpioi2c2;
+		i2c10 = &i2cexio0;
+		i2c11 = &i2cexio1;
+		i2c12 = &i2chdmi;
+		i2c13 = &i2cpwr;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@140000000 {
+		device_type = "memory";
+		reg = <1 0x40000000 0 0xc0000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		one {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		two {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+		three {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+		four {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+		led7 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+		led8 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fixedregulator3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	gpioi2c1: i2c-8 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	gpioi2c2: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
+	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
+	 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
+	 * Note: For testing the I2C slave feature, it is convenient to connect this
+	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
+	 * instantiate the slave device at runtime according to the documentation.
+	 * You can then communicate with the slave via IIC3.
+	 *
+	 * IIC0/I2C0 does not appear to support fallback to GPIO.
+	 */
+	i2cexio0: i2c-10 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic0>, <&i2c0>;
+		i2c-bus-name = "i2c-exio0";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/*
+	 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
+	 * This is similar to the arangement described for i2cexio0 (above)
+	 * with a fallback to GPIO also provided.
+	 */
+	i2cexio1: i2c-11 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-exio1";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/*
+	 * IIC2 and I2C2 may be switched using pinmux.
+	 * A fallback to GPIO is also provided.
+	 */
+	i2chdmi: i2c-12 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: codec@12 {
+			compatible = "asahi-kasei,ak4643";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+			remote = <&vin1>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin1ep0>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cec_clock>;
+			clock-names = "cec";
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+			adi,input-style = <1>;
+			adi,input-justification = "evenly";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&lvds0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con_out>;
+					};
+				};
+			};
+		};
+
+		hdmi-in@4c {
+			compatible = "adi,adv7612";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			default-input = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7612_in: endpoint {
+						remote-endpoint = <&hdmi_con_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					adv7612_out: endpoint {
+						remote-endpoint = <&vin0ep2>;
+					};
+				};
+			};
+		};
+	};
+
+	/*
+	 * IIC3 and I2C3 may be switched using pinmux.
+	 * IIC3/I2C3 does not appear to support fallback to GPIO.
+	 */
+	i2cpwr: i2c-13 {
+		compatible = "i2c-demux-pinctrl";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
+		i2c-parent = <&iic3>, <&i2c3>;
+		i2c-bus-name = "i2c-pwr";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@58 {
+			compatible = "dlg,da9063";
+			reg = <0x58>;
+			interrupt-parent = <&irqc0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+
+			rtc {
+				compatible = "dlg,da9063-rtc";
+			};
+
+			wdt {
+				compatible = "dlg,da9063-watchdog";
+			};
+		};
+
+		vdd_dvfs: regulator@68 {
+			compatible = "dlg,da9210";
+			reg = <0x68>;
+			interrupt-parent = <&irqc0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
+		function = "du";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	scifa1_pins: scifa1 {
+		groups = "scifa1_data";
+		function = "scifa1";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	mmc1_pins: mmc1 {
+		groups = "mmc1_data8", "mmc1_ctrl";
+		function = "mmc1";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	msiof1_pins: msiof1 {
+		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
+				 "msiof1_tx";
+		function = "msiof1";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	iic0_pins: iic0 {
+		groups = "iic0";
+		function = "iic0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	iic1_pins: iic1 {
+		groups = "iic1";
+		function = "iic1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	iic2_pins: iic2 {
+		groups = "iic2";
+		function = "iic2";
+	};
+
+	i2c3_pins: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	iic3_pins: iic3 {
+		groups = "iic3";
+		function = "iic3";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	hsusb_pins: hsusb {
+		groups = "usb0_ovc_vbus";
+		function = "usb0";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	usb2_pins: usb2 {
+		groups = "usb2";
+		function = "usb2";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin1 {
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&mmcif1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scifa1 {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+&i2c0	{
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "i2c-exio0";
+};
+
+&iic0	{
+	pinctrl-0 = <&iic0_pins>;
+	pinctrl-names = "i2c-exio0";
+};
+
+&i2c1	{
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-exio1";
+};
+
+&iic1	{
+	pinctrl-0 = <&iic1_pins>;
+	pinctrl-names = "i2c-exio1";
+};
+
+&i2c2	{
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <100000>;
+};
+
+&iic2	{
+	pinctrl-0 = <&iic2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <100000>;
+};
+
+&i2c3	{
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "i2c-pwr";
+};
+
+&iic3	{
+	pinctrl-0 = <&iic3_pins>;
+	pinctrl-names = "i2c-pwr";
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&xhci {
+	status = "okay";
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+};
+
+&pci2 {
+	status = "okay";
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&hsusb_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+/* HDMI video input */
+&vin0 {
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
+/* composite video input */
+&vin1 {
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		vin1ep0: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7790-stout-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a7790-stout-u-boot.dts
new file mode 100644
index 000000000..1396764d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7790-stout-u-boot.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Stout board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a7790-stout.dts"
+#include "r8a7790-u-boot.dtsi"
+
+&scifa0 {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	flash@0 {
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7790-stout.dts b/roms/u-boot/arch/arm/dts/r8a7790-stout.dts
new file mode 100644
index 000000000..a315ba749
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7790-stout.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Stout board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+/dts-v1/;
+#include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Stout";
+	compatible = "renesas,stout", "renesas,r8a7790";
+
+	aliases {
+		serial0 = &scifa0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+		led2 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+		};
+		led3 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		};
+		led5 {
+			gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fixedregulator3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	osc1_clk: osc1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	osc4_clk: osc4-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
+		 <&osc1_clk>;
+	clock-names = "du.0", "du.1", "du.2", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector0: endpoint {
+			};
+		};
+	};
+};
+
+&lvds1 {
+	ports {
+		port@1 {
+			lvds_connector1: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
+		function = "du";
+	};
+
+	scifa0_pins: scifa0 {
+		groups = "scifa0_data_b";
+		function = "scifa0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq1";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	iic2_pins: iic2 {
+		groups = "iic2_b";
+		function = "iic2";
+	};
+
+	iic3_pins: iic3 {
+		groups = "iic3";
+		function = "iic3";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "uboot";
+				reg = <0x00080000 0x00040000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "uboot-env";
+				reg = <0x000c0000 0x00040000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "flash";
+				reg = <0x00100000 0x03f00000>;
+			};
+		};
+	};
+};
+
+&scifa0 {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+&iic2	{
+	status = "okay";
+	pinctrl-0 = <&iic2_pins>;
+	pinctrl-names = "default";
+
+	clock-frequency = <100000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&osc4_clk>;
+		clock-names = "cec";
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&iic3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd: regulator@70 {
+		compatible = "dlg,da9210";
+		reg = <0x70>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7790-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a7790-u-boot.dtsi
new file mode 100644
index 000000000..87dbcafe3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7790-u-boot.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A7790 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&usb_extal_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&pfc {
+	u-boot,dm-pre-reloc;
+};
+
+&rst {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7790.dtsi b/roms/u-boot/arch/arm/dts/r8a7790.dtsi
new file mode 100644
index 000000000..334ba1976
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7790.dtsi
@@ -0,0 +1,1873 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H2 (R8A77900) SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
+ */
+
+#include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7790-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7790";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &iic0;
+		i2c5 = &iic1;
+		i2c6 = &iic2;
+		i2c7 = &iic3;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		spi4 = &msiof3;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+		vin3 = &vin3;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
+			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
+			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7790_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7790_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7790-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7790";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7790-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6151000 {
+			compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7790-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7790-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc0: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7790", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7790",
+				     "renesas,rcar-gen2-thermal",
+				     "renesas,rcar-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: mmu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: mmu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: mmu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: mmu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xffc80000 0 0x1000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7790",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7790",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7790",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7790",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		iic0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7790",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		iic1: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7790",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		iic2: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7790",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6520000 0 0x425>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+			       <&dmac1 0x69>, <&dmac1 0x6a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7790",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7790",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7790",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7790-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7790-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7790",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7790",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7790",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7790", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7790",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7790",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7790",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 64>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7790",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7790",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7790",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7790",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7790",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e56000 {
+			compatible = "renesas,scif-r8a7790",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e56000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7790",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7790",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7790",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7790",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7790",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 205>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c90000 {
+			compatible = "renesas,msiof-r8a7790",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6c90000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 215>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+			       <&dmac1 0x45>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 215>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7790",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7790_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7790",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7790_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7790",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7790",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7790",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7790",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7790",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7790_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>,
+					       <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>,
+					       <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>,
+					       <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>,
+					       <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>,
+					       <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+					       <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+					       <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>,
+					       <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>,
+					       <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>,
+					       <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7790",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7790",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7790",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7790",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0b0000 {
+			compatible = "renesas,pci-r8a7790",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0b0000 0 0xc00>,
+			      <0 0xee0a0000 0 0x1100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pci2: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7790",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			bus-range = <2 2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x20800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x21000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7790",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a7790",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee120000 0 0x328>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+			       <&dmac1 0xc9>, <&dmac1 0xca>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7790",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7790",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7790",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		mmcif1: mmc@ee220000 {
+			compatible = "renesas,mmcif-r8a7790",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee220000 0 0x80>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 305>;
+			dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+			       <&dmac1 0xe1>, <&dmac1 0xe2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 305>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		sata0: sata@ee300000 {
+			compatible = "renesas,sata-r8a7790",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		sata1: sata@ee500000 {
+			compatible = "renesas,sata-r8a7790",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee500000 0 0x200000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 814>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 814>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7790",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7790",
+				     "renesas,pcie-rcar-gen2";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		vsp@fe920000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 130>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 130>;
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 119>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 118>;
+		};
+
+		fdp1@fe948000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe948000 0 0x2400>;
+			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 117>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 117>;
+		};
+
+		jpu: jpeg-codec@fe980000 {
+			compatible = "renesas,jpu-r8a7790",
+				     "renesas,rcar-gen2-jpu";
+			reg = <0 0xfe980000 0 0x10300>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 106>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 106>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7790";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7790-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		lvds1: lvds@feb94000 {
+			compatible = "renesas,r8a7790-lvds";
+			reg = <0 0xfeb94000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 725>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 725>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds1_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7790-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7790-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7791-koelsch-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a7791-koelsch-u-boot.dts
new file mode 100644
index 000000000..4a9852809
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7791-koelsch-u-boot.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Koelsch board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a7791-koelsch.dts"
+#include "r8a7791-u-boot.dtsi"
+
+&scif0 {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	flash@0 {
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7791-koelsch.dts b/roms/u-boot/arch/arm/dts/r8a7791-koelsch.dts
new file mode 100644
index 000000000..2b096d5e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7791-koelsch.dts
@@ -0,0 +1,901 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Koelsch board
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Koelsch";
+	compatible = "renesas,koelsch", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+		i2c9 = &gpioi2c1;
+		i2c10 = &gpioi2c2;
+		i2c11 = &gpioi2c4;
+		i2c12 = &i2cexio1;
+		i2c13 = &i2chdmi;
+		i2c14 = &i2cexio4;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW30";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW31";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW32";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW33";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_E>;
+			label = "SW34";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F>;
+			label = "SW35";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_G>;
+			label = "SW36";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	gpioi2c1: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	gpioi2c2: i2c-10 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	gpioi2c4: i2c-11 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio1: i2c-12 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-exio1";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C2.
+	 */
+	i2chdmi: i2c-13 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c2>, <&gpioi2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: codec@12 {
+			compatible = "asahi-kasei,ak4643";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+			remote = <&vin1>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin1ep>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cec_clock>;
+			clock-names = "cec";
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+			adi,input-style = <1>;
+			adi,input-justification = "evenly";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_rgb>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con_out>;
+					};
+				};
+			};
+		};
+
+		hdmi-in@4c {
+			compatible = "adi,adv7612";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			default-input = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7612_in: endpoint {
+						remote-endpoint = <&hdmi_con_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					adv7612_out: endpoint {
+						remote-endpoint = <&vin0ep2>;
+					};
+				};
+			};
+		};
+
+		eeprom@50 {
+			compatible = "renesas,r1ex24002", "atmel,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+
+	/*
+	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio4: i2c-14 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c4>, <&gpioi2c4>;
+		i2c-bus-name = "i2c-exio4";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4_c";
+		function = "i2c4";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	msiof0_pins: msiof0 {
+		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		function = "msiof0";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin1 {
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x00580000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "flash";
+				reg = <0x00600000 0x03a00000>;
+			};
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-exio1";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <100000>;
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "i2c-exio4";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+/* HDMI video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
+/* composite video input */
+&vin1 {
+	status = "okay";
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin1ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7791-porter-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a7791-porter-u-boot.dts
new file mode 100644
index 000000000..82051be82
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7791-porter-u-boot.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Porter board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a7791-porter.dts"
+#include "r8a7791-u-boot.dtsi"
+
+&scif0 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&qspi {
+	flash@0 {
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7791-porter.dts b/roms/u-boot/arch/arm/dts/r8a7791-porter.dts
new file mode 100644
index 000000000..f9ece7ab2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7791-porter.dts
@@ -0,0 +1,521 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Porter board
+ *
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ */
+
+/*
+ * SSI-AK4642
+ *
+ * JP3: 2-1: AK4642
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Porter";
+	compatible = "renesas,porter", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+		i2c9 = &gpioi2c2;
+		i2c10 = &i2chdmi;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x14_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4642>;
+			clocks = <&x14_clk>;
+		};
+	};
+
+	gpioi2c2: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C2.
+	 */
+	i2chdmi: i2c-10 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c2>, <&gpioi2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4642: codec@12 {
+			compatible = "asahi-kasei,ak4642";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+			remote = <&vin0>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin0ep>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+			adi,input-style = <1>;
+			adi,input-justification = "evenly";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_rgb>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader_prg";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user_prg";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash_fs";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <400000>;
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@5a {
+		compatible = "dlg,da9063l";
+		reg = <0x5a>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&pci0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pci1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec {
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7791-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a7791-u-boot.dtsi
new file mode 100644
index 000000000..7a9938054
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7791-u-boot.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A7791 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&usb_extal_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&pfc {
+	u-boot,dm-pre-reloc;
+};
+
+&rst {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7791.dtsi b/roms/u-boot/arch/arm/dts/r8a7791.dtsi
new file mode 100644
index 000000000..59a55e87f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7791.dtsi
@@ -0,0 +1,1806 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M2-W (R8A77910) SoC
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
+ */
+
+#include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7791-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7791";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
+			power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
+			power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7791_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7791-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 904>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 904>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7791";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7791-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7791-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7791-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc0: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7791", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7791",
+				     "renesas,rcar-gen2-thermal",
+				     "renesas,rcar-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: mmu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: mmu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: mmu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: mmu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xffc80000 0 0x1000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: mmu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e60b0000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7791",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7791",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7791",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7791",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7791",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7791-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7791-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7791",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7791",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7791",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 64>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 64>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 64>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 64>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7791",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7791",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7791",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7791",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7791",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7791",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 96>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7791",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 000>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7791",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7791",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 205>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		adc: adc@e6e54000 {
+			compatible = "renesas,r8a7791-gyroadc",
+				     "renesas,rcar-gyroadc";
+			reg = <0 0xe6e54000 0 64>;
+			clocks = <&cpg CPG_MOD 901>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 901>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7791",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7791",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7791",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7791",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7791",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7791",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7791_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0", "src.9", "src.8",
+				      "src.7", "src.6", "src.5", "src.4",
+				      "src.3", "src.2", "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>,
+					       <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>,
+					       <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>,
+					       <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>,
+					       <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>,
+					       <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+					       <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+					       <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>,
+					       <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>,
+					       <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>,
+					       <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7791",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7791",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7791",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7791",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7791",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7791",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7791",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7791",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7791",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		sata0: sata@ee300000 {
+			compatible = "renesas,sata-r8a7791",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		sata1: sata@ee500000 {
+			compatible = "renesas,sata-r8a7791",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee500000 0 0x200000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 814>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 814>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7791",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7791",
+				     "renesas,pcie-rcar-gen2";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 119>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 118>;
+		};
+
+		jpu: jpeg-codec@fe980000 {
+			compatible = "renesas,jpu-r8a7791",
+				     "renesas,rcar-gen2-jpu";
+			reg = <0 0xfe980000 0 0x10300>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 106>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 106>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7791";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7791-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7791-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7791-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7792-blanche-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a7792-blanche-u-boot.dts
new file mode 100644
index 000000000..30b27040f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7792-blanche-u-boot.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Blanche board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a7792-blanche.dts"
+#include "r8a7792-u-boot.dtsi"
+
+&iic3 {
+	status = "okay";
+};
+
+&scif0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7792-blanche.dts b/roms/u-boot/arch/arm/dts/r8a7792-blanche.dts
new file mode 100644
index 000000000..248eb717e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7792-blanche.dts
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Blanche";
+	compatible = "renesas,blanche", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x1_clk: x1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x2_clk: x2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <65000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+		};
+		key-2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		};
+		key-3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+		};
+		key-4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+		};
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW24";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW25";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led17 {
+			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
+		};
+		led18 {
+			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
+		};
+		led19 {
+			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
+		};
+		led20 {
+			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&can_clk {
+	clock-frequency = <48000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif3_pins: scif3 {
+		groups = "scif3_data";
+		function = "scif3";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data", "can_clk";
+		function = "can0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif3 {
+	pinctrl-0 = <&scif3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&irqc>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&iic3 {
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
+		interrupt-parent = <&irqc>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7792-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a7792-u-boot.dtsi
new file mode 100644
index 000000000..bb72d5edb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7792-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A7792 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&pfc {
+	u-boot,dm-pre-reloc;
+};
+
+&rst {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7792.dtsi b/roms/u-boot/arch/arm/dts/r8a7792.dtsi
new file mode 100644
index 000000000..39af16caa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7792.dtsi
@@ -0,0 +1,924 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V2H (R8A77920) SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ */
+
+#include <dt-bindings/clock/r8a7792-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7792";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &iic3;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+		vin3 = &vin3;
+		vin4 = &vin4;
+		vin5 = &vin5;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7792_PD_CA15_SCU>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7792-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055100 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055100 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		gpio7: gpio@e6055200 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055200 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 904>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 904>;
+		};
+
+		gpio8: gpio@e6055300 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055300 0 0x50>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 256 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 921>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 921>;
+		};
+
+		gpio9: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 288 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+		};
+
+		gpio10: gpio@e6055500 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055500 0 0x50>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 320 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 914>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+		};
+
+		gpio11: gpio@e6055600 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055600 0 0x50>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 352 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 913>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7792";
+			reg = <0 0xe6060000 0 0x144>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7792-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7792-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7792-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7792-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7792", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		/* I2C doesn't need pinmux */
+		i2c0: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7792",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7792",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7792", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7792",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 000>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7792",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			status = "disabled";
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			status = "disabled";
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7792",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			clocks = <&cpg CPG_MOD 314>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		jpu: jpeg-codec@fe980000 {
+			compatible = "renesas,jpu-r8a7792",
+				     "renesas,rcar-gen2-jpu";
+			reg = <0 0xfe980000 0 0x10300>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 106>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 106>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7792";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7792-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7792-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7793-gose-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a7793-gose-u-boot.dts
new file mode 100644
index 000000000..a35d35c33
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7793-gose-u-boot.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Gose board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a7793-gose.dts"
+#include "r8a7793-u-boot.dtsi"
+
+&scif0 {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	flash@0 {
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7793-gose.dts b/roms/u-boot/arch/arm/dts/r8a7793-gose.dts
new file mode 100644
index 000000000..22ca7cd1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7793-gose.dts
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Gose board
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7793.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gose";
+	compatible = "renesas,gose", "renesas,r8a7793";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+		i2c9 = &gpioi2c2;
+		i2c10 = &gpioi2c4;
+		i2c11 = &i2chdmi;
+		i2c12 = &i2cexio4;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW30";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW31";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW32";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW33";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_E>;
+			label = "SW34";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F>;
+			label = "SW35";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_G>;
+			label = "SW36";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	gpioi2c2: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	gpioi2c4: i2c-10 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C2.
+	 */
+	i2chdmi: i2c-11 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c2>, <&gpioi2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: codec@12 {
+			compatible = "asahi-kasei,ak4643";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180cp";
+			reg = <0x20>;
+			remote = <&vin1>;
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7180_in: endpoint {
+						remote-endpoint = <&composite_con_in>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					adv7180_out: endpoint {
+						bus-width = <8>;
+						remote-endpoint = <&vin1ep>;
+					};
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+			adi,input-style = <1>;
+			adi,input-justification = "evenly";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_rgb>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con_out>;
+					};
+				};
+			};
+		};
+
+		hdmi-in@4c {
+			compatible = "adi,adv7612";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			default-input = <0>;
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7612_in: endpoint {
+						remote-endpoint = <&hdmi_con_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					adv7612_out: endpoint {
+						remote-endpoint = <&vin0ep2>;
+					};
+				};
+			};
+		};
+
+		eeprom@50 {
+			compatible = "renesas,r1ex24002", "atmel,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+
+	/*
+	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio4: i2c-12 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c4>, <&gpioi2c4>;
+		i2c-bus-name = "i2c-exio4";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4_c";
+		function = "i2c4";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin1 {
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "i2c-exio4";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+/* HDMI video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
+/* composite video input */
+&vin1 {
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		vin1ep: endpoint {
+			remote-endpoint = <&adv7180_out>;
+			bus-width = <8>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7793-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a7793-u-boot.dtsi
new file mode 100644
index 000000000..4858b171b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7793-u-boot.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A7793 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&usb_extal_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&pfc {
+	u-boot,dm-pre-reloc;
+};
+
+&rst {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7793.dtsi b/roms/u-boot/arch/arm/dts/r8a7793.dtsi
new file mode 100644
index 000000000..eef035c4d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7793.dtsi
@@ -0,0 +1,1467 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M2-N (R8A77930) SoC
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ */
+
+#include <dt-bindings/clock/r8a7793-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7793-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7793";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
+			power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
+			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7793_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7793-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 904>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 904>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7793";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		/* Special CPG clocks */
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7793-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7793-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7793-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7793-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc0: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7793", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7793",
+				     "renesas,rcar-gen2-thermal",
+				     "renesas,rcar-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: mmu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: mmu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: mmu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: mmu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xffc80000 0 0x1000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: mmu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e60b0000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7793",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7793",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7793",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7793",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7793",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7793", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 64>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 64>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 64>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 64>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7793",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7793",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7793",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7793",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7793",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7793",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 96>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7793",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7793_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7793",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7793_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7793",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7793",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7793",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7793",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7793_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>,
+					       <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>,
+					       <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>,
+					       <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>,
+					       <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>,
+					       <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+					       <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+					       <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>,
+					       <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>,
+					       <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>,
+					       <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7793",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7793",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7793",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7793",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7793",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7793",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7793",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+				<0 0xf1002000 0 0x2000>,
+				<0 0xf1004000 0 0x2000>,
+				<0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 119>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 118>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7793";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7793-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7793-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7793-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7794-alt-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a7794-alt-u-boot.dts
new file mode 100644
index 000000000..29b0e32d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7794-alt-u-boot.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Alt board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a7794-alt.dts"
+#include "r8a7794-u-boot.dtsi"
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&pfc {
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&scif2 {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	flash@0 {
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7794-alt.dts b/roms/u-boot/arch/arm/dts/r8a7794-alt.dts
new file mode 100644
index 000000000..f79fce74c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7794-alt.dts
@@ -0,0 +1,486 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Alt board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Alt";
+	compatible = "renesas,alt", "renesas,r8a7794";
+
+	aliases {
+		serial0 = &scif2;
+		i2c9 = &gpioi2c1;
+		i2c10 = &gpioi2c4;
+		i2c11 = &i2chdmi;
+		i2c12 = &i2cexio4;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-d3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	gpioi2c1: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	};
+
+	gpioi2c4: i2c-10 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C1.
+	 */
+	i2chdmi: i2c-11 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+			remote = <&vin0>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin0ep>;
+				};
+			};
+		};
+
+		eeprom@50 {
+			compatible = "renesas,r1ex24002", "atmel,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+
+	/*
+	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio4: i2c-14 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c4>, <&gpioi2c4>;
+		i2c-bus-name = "i2c-exio4";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq8";
+		function = "intc";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	mmcif0_pins: mmcif0 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&pfc {
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "i2c-exio4";
+};
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+};
+
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "system";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7794-silk-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a7794-silk-u-boot.dts
new file mode 100644
index 000000000..179753d7c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7794-silk-u-boot.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Silk board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a7794-silk.dts"
+#include "r8a7794-u-boot.dtsi"
+
+&scif2 {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	flash@0 {
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7794-silk.dts b/roms/u-boot/arch/arm/dts/r8a7794-silk.dts
new file mode 100644
index 000000000..2c16ad854
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7794-silk.dts
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the SILK board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014-2015 Renesas Solutions Corp.
+ * Copyright (C) 2014-2015 Cogent Embedded, Inc.
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SILK";
+	compatible = "renesas,silk", "renesas,r8a7794";
+
+	aliases {
+		serial0 = &scif2;
+		i2c9 = &gpioi2c1;
+		i2c10 = &i2chdmi;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-3 {
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-6 {
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_6>;
+			label = "SW6";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW12-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW12-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW12-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW12-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	d3_3v: regulator-d3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x9_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
+
+	gpioi2c1: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C1.
+	 */
+	i2chdmi: i2c-10 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: codec@12 {
+			compatible = "asahi-kasei,ak4643";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+			remote = <&vin0>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin0ep>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+			adi,input-style = <1>;
+			adi,input-justification = "evenly";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_rgb0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+
+		eeprom@50 {
+			compatible = "renesas,r1ex24002", "atmel,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq8";
+		function = "intc";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	mmcif0_pins: mmcif0 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clkc";
+		function = "audio_clk";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <400000>;
+};
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x2_clk>, <&x3_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7794-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a7794-u-boot.dtsi
new file mode 100644
index 000000000..84c7b3198
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7794-u-boot.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A7794 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&usb_extal_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&pfc {
+	u-boot,dm-pre-reloc;
+};
+
+&rst {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a7794.dtsi b/roms/u-boot/arch/arm/dts/r8a7794.dtsi
new file mode 100644
index 000000000..05ef79c6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a7794.dtsi
@@ -0,0 +1,1432 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car E2 (R8A77940) SoC
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Ulrich Hecht
+ */
+
+#include <dt-bindings/clock/r8a7794-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7794-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7794";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		spi0 = &qspi;
+		vin0 = &vin0;
+		vin1 = &vin1;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clka: audio_clka {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clkb: audio_clkb {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clkc: audio_clkc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
+			power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
+			power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA7: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7794_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7794-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7794";
+			reg = <0 0xe6060000 0 0x11c>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7794-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6151000 {
+			compatible = "renesas,r8a7794-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7794-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7794-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc0: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7794", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		ipmmu_sy0: mmu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: mmu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: mmu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: mmu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: mmu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e6500000 {
+			compatible = "renesas,iic-r8a7794",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6510000 {
+			compatible = "renesas,iic-r8a7794",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7794",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7794",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7794",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7794",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7794",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7794", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 64>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 64>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 64>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 64>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7794",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7794",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7794",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7794",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7794",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7794",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 96>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7794",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7794_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7794",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7794_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7794",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7794",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7794",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+				 <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
+				 <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+				 <&cpg CPG_CORE R8A7794_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.6", "src.5", "src.4", "src.3",
+				      "src.2", "src.1",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src-0 {
+					status = "disabled";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7794",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7794",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7794",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7794",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7794",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7794",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7794",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7794",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 119>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7794";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7794-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7794-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77950-salvator-x-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77950-salvator-x-u-boot.dts
new file mode 100644
index 000000000..36c8a44a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77950-salvator-x-u-boot.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Salvator-X board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77950-salvator-x.dts"
+#include "r8a77950-u-boot.dtsi"
+
+&rpc {
+	reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+	status = "okay";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&sdhi2 {
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+};
+
+&sdhi3 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&vcc_sdhi0 {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&vcc_sdhi3 {
+	u-boot,off-on-delay-us = <20000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77950-salvator-x.dts b/roms/u-boot/arch/arm/dts/r8a77950-salvator-x.dts
new file mode 100644
index 000000000..2438825c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77950-salvator-x.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77950.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77950";
+	compatible = "renesas,salvator-x", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+&hdmi0_con {
+	remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&hdmi1 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi1_out: endpoint {
+				remote-endpoint = <&hdmi1_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi1_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint2>;
+			};
+		};
+	};
+};
+
+&hdmi1_con {
+	remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pfc {
+	usb2_pins: usb2 {
+		groups = "usb2";
+		function = "usb2";
+	};
+};
+
+&rcar_sound {
+	ports {
+		/* rsnd_port0 is on salvator-common */
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_endpoint2: endpoint {
+				remote-endpoint = <&dw_hdmi1_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint2>;
+				frame-master = <&rsnd_endpoint2>;
+
+				playback = <&ssi3>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_card {
+	dais = <&rsnd_port0	/* ak4613 */
+		&rsnd_port1	/* HDMI0  */
+		&rsnd_port2>;	/* HDMI1  */
+};
+
+&usb2_phy2 {
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77950-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a77950-u-boot.dtsi
new file mode 100644
index 000000000..5a1165146
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77950-u-boot.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A7795 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/ {
+	soc {
+		rpc: rpc@ee200000 {
+			compatible = "renesas,rpc-r8a7795", "renesas,rpc";
+			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
+			clocks = <&cpg CPG_MOD 917>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+	};
+};
+
+/delete-node/ &ak4613;
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi21;
+/delete-node/ &csi40;
+/delete-node/ &csi41;
+/delete-node/ &drif00;
+/delete-node/ &drif01;
+/delete-node/ &drif10;
+/delete-node/ &drif11;
+/delete-node/ &drif20;
+/delete-node/ &drif21;
+/delete-node/ &drif30;
+/delete-node/ &drif31;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpf1;
+/delete-node/ &fcpf2;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvb1;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvd2;
+/delete-node/ &fcpvd3;
+/delete-node/ &fcpvi0;
+/delete-node/ &fcpvi1;
+/delete-node/ &fcpvi2;
+/delete-node/ &hdmi0;
+/delete-node/ &hdmi1;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspbc;
+/delete-node/ &vspbd;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspd2;
+/delete-node/ &vspd3;
+/delete-node/ &vspi0;
+/delete-node/ &vspi1;
+/delete-node/ &vspi2;
+
+/ {
+	/delete-node/ cvbs-in;
+	/delete-node/ hdmi-in;
+	/delete-node/ hdmi0-out;
+	/delete-node/ hdmi1-out;
+	/delete-node/ vga-encoder;
+	/delete-node/ vga;
+};
+
+&i2c4 {
+	/delete-node/ video-receiver@70;
+};
+
+&soc {
+	/delete-node/ fdp1@fe940000;
+	/delete-node/ fdp1@fe944000;
+	/delete-node/ fdp1@fe948000;
+	/delete-node/ imr-lx4@fe860000;
+	/delete-node/ imr-lx4@fe870000;
+	/delete-node/ imr-lx4@fe880000;
+	/delete-node/ imr-lx4@fe890000;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77950-ulcb-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77950-ulcb-u-boot.dts
new file mode 100644
index 000000000..d3191c55d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77950-ulcb-u-boot.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the ULCB board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77950-ulcb.dts"
+#include "r8a77950-u-boot.dtsi"
+
+/ {
+	cpld {
+		compatible = "renesas,ulcb-cpld";
+		status = "okay";
+		gpio-sck = <&gpio6 8 0>;
+		gpio-mosi = <&gpio6 7 0>;
+		gpio-miso = <&gpio6 10 0>;
+		gpio-sstbz = <&gpio2 3 0>;
+	};
+};
+
+&rpc {
+	reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+	status = "okay";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&sdhi2 {
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+};
+
+&vcc_sdhi0 {
+	u-boot,off-on-delay-us = <20000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77950-ulcb.dts b/roms/u-boot/arch/arm/dts/r8a77950-ulcb.dts
new file mode 100644
index 000000000..38a6d6a10
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77950-ulcb.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77950.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas H3ULCB board based on r8a77950";
+	compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77950.dtsi b/roms/u-boot/arch/arm/dts/r8a77950.dtsi
new file mode 100644
index 000000000..15216495e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77950.dtsi
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H3 (R8A77950) SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+#include "r8a77951.dtsi"
+
+&audma0 {
+	iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
+	       <&ipmmu_mp1 2>, <&ipmmu_mp1 3>,
+	       <&ipmmu_mp1 4>, <&ipmmu_mp1 5>,
+	       <&ipmmu_mp1 6>, <&ipmmu_mp1 7>,
+	       <&ipmmu_mp1 8>, <&ipmmu_mp1 9>,
+	       <&ipmmu_mp1 10>, <&ipmmu_mp1 11>,
+	       <&ipmmu_mp1 12>, <&ipmmu_mp1 13>,
+	       <&ipmmu_mp1 14>, <&ipmmu_mp1 15>;
+};
+
+&audma1 {
+	iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>,
+	       <&ipmmu_mp1 18>, <&ipmmu_mp1 19>,
+	       <&ipmmu_mp1 20>, <&ipmmu_mp1 21>,
+	       <&ipmmu_mp1 22>, <&ipmmu_mp1 23>,
+	       <&ipmmu_mp1 24>, <&ipmmu_mp1 25>,
+	       <&ipmmu_mp1 26>, <&ipmmu_mp1 27>,
+	       <&ipmmu_mp1 28>, <&ipmmu_mp1 29>,
+	       <&ipmmu_mp1 30>, <&ipmmu_mp1 31>;
+};
+
+&du {
+	vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
+};
+
+&fcpvb1 {
+	iommus = <&ipmmu_vp0 7>;
+};
+
+&fcpf1 {
+	iommus = <&ipmmu_vp0 1>;
+};
+
+&fcpvi1 {
+	iommus = <&ipmmu_vp0 9>;
+};
+
+&fcpvd2 {
+	iommus = <&ipmmu_vi0 10>;
+};
+
+&gpio1 {
+	gpio-ranges = <&pfc 0 32 28>;
+};
+
+&ipmmu_vi0 {
+	renesas,ipmmu-main = <&ipmmu_mm 11>;
+};
+
+&ipmmu_vp0 {
+	renesas,ipmmu-main = <&ipmmu_mm 12>;
+};
+
+&ipmmu_vc0 {
+	renesas,ipmmu-main = <&ipmmu_mm 9>;
+};
+
+&ipmmu_vc1 {
+	renesas,ipmmu-main = <&ipmmu_mm 10>;
+};
+
+&ipmmu_rt {
+	renesas,ipmmu-main = <&ipmmu_mm 7>;
+};
+
+&soc {
+	/delete-node/ dma-controller@e6460000;
+	/delete-node/ dma-controller@e6470000;
+
+	ipmmu_mp1: mmu@ec680000 {
+		compatible = "renesas,ipmmu-r8a7795";
+		reg = <0 0xec680000 0 0x1000>;
+		renesas,ipmmu-main = <&ipmmu_mm 5>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		#iommu-cells = <1>;
+	};
+
+	ipmmu_sy: mmu@e7730000 {
+		compatible = "renesas,ipmmu-r8a7795";
+		reg = <0 0xe7730000 0 0x1000>;
+		renesas,ipmmu-main = <&ipmmu_mm 8>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		#iommu-cells = <1>;
+	};
+
+	/delete-node/ mmu@fd950000;
+	/delete-node/ mmu@fd960000;
+	/delete-node/ mmu@fd970000;
+	/delete-node/ mmu@febe0000;
+	/delete-node/ mmu@fe980000;
+
+	xhci1: usb@ee040000 {
+		compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+		reg = <0 0xee040000 0 0xc00>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 327>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		resets = <&cpg 327>;
+		status = "disabled";
+	};
+
+	/delete-node/ usb@e659c000;
+	/delete-node/ usb@ee0e0000;
+	/delete-node/ usb@ee0e0100;
+
+	/delete-node/ usb-phy@ee0e0200;
+
+	fdp1@fe948000 {
+		compatible = "renesas,fdp1";
+		reg = <0 0xfe948000 0 0x2400>;
+		interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 117>;
+		power-domains = <&sysc R8A7795_PD_A3VP>;
+		resets = <&cpg 117>;
+		renesas,fcp = <&fcpf2>;
+	};
+
+	fcpf2: fcp@fe952000 {
+		compatible = "renesas,fcpf";
+		reg = <0 0xfe952000 0 0x200>;
+		clocks = <&cpg CPG_MOD 613>;
+		power-domains = <&sysc R8A7795_PD_A3VP>;
+		resets = <&cpg 613>;
+		iommus = <&ipmmu_vp0 2>;
+	};
+
+	fcpvd3: fcp@fea3f000 {
+		compatible = "renesas,fcpv";
+		reg = <0 0xfea3f000 0 0x200>;
+		clocks = <&cpg CPG_MOD 600>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		resets = <&cpg 600>;
+		iommus = <&ipmmu_vi0 11>;
+	};
+
+	fcpvi2: fcp@fe9cf000 {
+		compatible = "renesas,fcpv";
+		reg = <0 0xfe9cf000 0 0x200>;
+		clocks = <&cpg CPG_MOD 609>;
+		power-domains = <&sysc R8A7795_PD_A3VP>;
+		resets = <&cpg 609>;
+		iommus = <&ipmmu_vp0 10>;
+	};
+
+	vspd3: vsp@fea38000 {
+		compatible = "renesas,vsp2";
+		reg = <0 0xfea38000 0 0x5000>;
+		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 620>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		resets = <&cpg 620>;
+
+		renesas,fcp = <&fcpvd3>;
+	};
+
+	vspi2: vsp@fe9c0000 {
+		compatible = "renesas,vsp2";
+		reg = <0 0xfe9c0000 0 0x8000>;
+		interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 629>;
+		power-domains = <&sysc R8A7795_PD_A3VP>;
+		resets = <&cpg 629>;
+
+		renesas,fcp = <&fcpvi2>;
+	};
+
+	csi21: csi2@fea90000 {
+		compatible = "renesas,r8a7795-csi2";
+		reg = <0 0xfea90000 0 0x10000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 713>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		resets = <&cpg 713>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg = <1>;
+
+				csi21vin0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vin0csi21>;
+				};
+				csi21vin1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vin1csi21>;
+				};
+				csi21vin2: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&vin2csi21>;
+				};
+				csi21vin3: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&vin3csi21>;
+				};
+				csi21vin4: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&vin4csi21>;
+				};
+				csi21vin5: endpoint@5 {
+					reg = <5>;
+					remote-endpoint = <&vin5csi21>;
+				};
+				csi21vin6: endpoint@6 {
+					reg = <6>;
+					remote-endpoint = <&vin6csi21>;
+				};
+				csi21vin7: endpoint@7 {
+					reg = <7>;
+					remote-endpoint = <&vin7csi21>;
+				};
+			};
+		};
+	};
+};
+
+&vin0 {
+	ports {
+		port@1 {
+			vin0csi21: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csi21vin0>;
+			};
+		};
+	};
+};
+
+&vin1 {
+	ports {
+		port@1 {
+			vin1csi21: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csi21vin1>;
+			};
+		};
+	};
+};
+
+&vin2 {
+	ports {
+		port@1 {
+			vin2csi21: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csi21vin2>;
+			};
+		};
+	};
+};
+
+&vin3 {
+	ports {
+		port@1 {
+			vin3csi21: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csi21vin3>;
+			};
+		};
+	};
+};
+
+&vin4 {
+	ports {
+		port@1 {
+			vin4csi21: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csi21vin4>;
+			};
+		};
+	};
+};
+
+&vin5 {
+	ports {
+		port@1 {
+			vin5csi21: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csi21vin5>;
+			};
+		};
+	};
+};
+
+&vin6 {
+	ports {
+		port@1 {
+			vin6csi21: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csi21vin6>;
+			};
+		};
+	};
+};
+
+&vin7 {
+	ports {
+		port@1 {
+			vin7csi21: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csi21vin7>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77951.dtsi b/roms/u-boot/arch/arm/dts/r8a77951.dtsi
new file mode 100644
index 000000000..a8729eb74
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77951.dtsi
@@ -0,0 +1,3339 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H3 (R8A77951) SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7795-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a7795";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c_dvfs;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+				core2 {
+					cpu = <&a57_2>;
+				};
+				core3 {
+					cpu = <&a57_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7795_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7795_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>,
+				     <&a53_1>,
+				     <&a53_2>,
+				     <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>,
+				     <&a57_1>,
+				     <&a57_2>,
+				     <&a57_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7795";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a7795-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7795-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7795-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7795-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a7795-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a7795", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7795",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 96>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 96>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 96>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		hsusb3: usb@e659c000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe659c000 0 0x200>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>;
+			dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
+			       <&usb_dmac3 0>, <&usb_dmac3 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy3 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 705>, <&cpg 700>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac2: dma-controller@e6460000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe6460000 0 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 326>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 326>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac3: dma-controller@e6470000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe6470000 0 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 329>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a7795-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A7795_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp0: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: mmu@fd950000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv2: mmu@fd960000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv3: mmu@fd970000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd970000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc1: mmu@fe6f0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe6f0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 13>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: mmu@febe0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfebe0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp1: mmu@fe980000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe980000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 17>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7795",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a7795",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a7795",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7795-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7795", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin7>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x64>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x64>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x64>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x64>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x64>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x64>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible =  "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
+			reg =	<0 0xec500000 0 0x1000>, /* SCU */
+				<0 0xec5a0000 0 0x100>,  /* ADG */
+				<0 0xec540000 0 0x1000>, /* SSIU */
+				<0 0xec541000 0 0x280>,  /* SSI */
+				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>,
+			       <&ipmmu_mp0 2>, <&ipmmu_mp0 3>,
+			       <&ipmmu_mp0 4>, <&ipmmu_mp0 5>,
+			       <&ipmmu_mp0 6>, <&ipmmu_mp0 7>,
+			       <&ipmmu_mp0 8>, <&ipmmu_mp0 9>,
+			       <&ipmmu_mp0 10>, <&ipmmu_mp0 11>,
+			       <&ipmmu_mp0 12>, <&ipmmu_mp0 13>,
+			       <&ipmmu_mp0 14>, <&ipmmu_mp0 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>,
+			       <&ipmmu_mp0 18>, <&ipmmu_mp0 19>,
+			       <&ipmmu_mp0 20>, <&ipmmu_mp0 21>,
+			       <&ipmmu_mp0 22>, <&ipmmu_mp0 23>,
+			       <&ipmmu_mp0 24>, <&ipmmu_mp0 25>,
+			       <&ipmmu_mp0 26>, <&ipmmu_mp0 27>,
+			       <&ipmmu_mp0 28>, <&ipmmu_mp0 29>,
+			       <&ipmmu_mp0 30>, <&ipmmu_mp0 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a7795-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ohci2: usb@ee0c0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0c0000 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			status = "disabled";
+		};
+
+		ohci3: usb@ee0e0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0e0000 0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			phys = <&usb2_phy3 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci2: usb@ee0c0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0c0100 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2 2>;
+			phy-names = "usb";
+			companion = <&ohci2>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			status = "disabled";
+		};
+
+		ehci3: usb@ee0e0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0e0100 0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			phys = <&usb2_phy3 2>;
+			phy-names = "usb";
+			companion = <&ohci3>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy2: usb-phy@ee0c0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0c0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 701>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy3: usb-phy@ee0e0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0e0200 0 0x700>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a7795",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+			iommus = <&ipmmu_hc 2>;
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7795",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7795",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		imr-lx4@fe860000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe860000 0 0x2000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 823>;
+		};
+
+		imr-lx4@fe870000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe870000 0 0x2000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 822>;
+		};
+
+		imr-lx4@fe880000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe880000 0 0x2000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 821>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 821>;
+		};
+
+		imr-lx4@fe890000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe890000 0 0x2000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 820>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 820>;
+		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 624>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 630>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 118>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 615>;
+			iommus = <&ipmmu_vp0 0>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 614>;
+			iommus = <&ipmmu_vp1 1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 606>;
+			iommus = <&ipmmu_vp1 7>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 610>;
+			iommus = <&ipmmu_vp1 9>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi1 10>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm2: cmm@fea60000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea60000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 709>;
+			resets = <&cpg 709>;
+		};
+
+		cmm3: cmm@fea70000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea70000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 708>;
+			resets = <&cpg 708>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@feab0000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfeab0000 0 0x10000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi41vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi41>;
+					};
+					csi41vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi41>;
+					};
+					csi41vin6: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin6csi41>;
+					};
+					csi41vin7: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin7csi41>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		hdmi1: hdmi@feae0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfeae0000 0 0x10000>;
+			interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 728>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 728>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi1_in: endpoint {
+						remote-endpoint = <&du_out_hdmi1>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7795";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.2", "du.3";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
+			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_hdmi1: endpoint {
+						remote-endpoint = <&dw_hdmi1_in>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7795-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77960-salvator-x-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77960-salvator-x-u-boot.dts
new file mode 100644
index 000000000..439fd6c3a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77960-salvator-x-u-boot.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Salvator-X board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77960-salvator-x.dts"
+#include "r8a77960-u-boot.dtsi"
+
+&rpc {
+	reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+	status = "okay";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&sdhi2 {
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+};
+
+&sdhi3 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&vcc_sdhi0 {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&vcc_sdhi3 {
+	u-boot,off-on-delay-us = <20000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77960-salvator-x.dts b/roms/u-boot/arch/arm/dts/r8a77960-salvator-x.dts
new file mode 100644
index 000000000..ecfbeafea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77960-salvator-x.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-W
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77960.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77960";
+	compatible = "renesas,salvator-x", "renesas,r8a7796";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+&hdmi0_con {
+	remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&rcar_sound {
+	ports {
+		/* rsnd_port0 is on salvator-common */
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
+
+&sound_card {
+	dais = <&rsnd_port0	/* ak4613 */
+		&rsnd_port1>;	/* HDMI0  */
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77960-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a77960-u-boot.dtsi
new file mode 100644
index 000000000..f1cae1c35
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77960-u-boot.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A7796 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/ {
+	soc {
+		rpc: rpc@ee200000 {
+			compatible = "renesas,rpc-r8a7796", "renesas,rpc";
+			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
+			clocks = <&cpg CPG_MOD 917>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+	};
+};
+
+/delete-node/ &ak4613;
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi40;
+/delete-node/ &drif00;
+/delete-node/ &drif01;
+/delete-node/ &drif10;
+/delete-node/ &drif11;
+/delete-node/ &drif20;
+/delete-node/ &drif21;
+/delete-node/ &drif30;
+/delete-node/ &drif31;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvd2;
+/delete-node/ &fcpvi0;
+/delete-node/ &hdmi0;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspb;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspd2;
+/delete-node/ &vspi0;
+
+/ {
+	/delete-node/ cvbs-in;
+	/delete-node/ hdmi-in;
+	/delete-node/ hdmi0-out;
+	/delete-node/ hdmi1-out;
+	/delete-node/ vga-encoder;
+	/delete-node/ vga;
+};
+
+&i2c4 {
+	/delete-node/ video-receiver@70;
+};
+
+/ {
+	soc {
+		/delete-node/ fdp1@fe940000;
+		/delete-node/ fdp1@fe944000;
+		/delete-node/ fdp1@fe948000;
+		/delete-node/ imr-lx4@fe860000;
+		/delete-node/ imr-lx4@fe870000;
+		/delete-node/ imr-lx4@fe880000;
+		/delete-node/ imr-lx4@fe890000;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77960-ulcb-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77960-ulcb-u-boot.dts
new file mode 100644
index 000000000..aab9c9593
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77960-ulcb-u-boot.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the ULCB board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77960-ulcb.dts"
+#include "r8a77960-u-boot.dtsi"
+
+/ {
+	cpld {
+		compatible = "renesas,ulcb-cpld";
+		status = "okay";
+		gpio-sck = <&gpio6 8 0>;
+		gpio-mosi = <&gpio6 7 0>;
+		gpio-miso = <&gpio6 10 0>;
+		gpio-sstbz = <&gpio2 3 0>;
+	};
+};
+
+&rpc {
+	reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+	status = "okay";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+};
+
+&sdhi2 {
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+};
+
+&vcc_sdhi0 {
+	u-boot,off-on-delay-us = <20000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77960-ulcb.dts b/roms/u-boot/arch/arm/dts/r8a77960-ulcb.dts
new file mode 100644
index 000000000..d041042a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77960-ulcb.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77960.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a77960";
+	compatible = "renesas,m3ulcb", "renesas,r8a7796";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77960.dtsi b/roms/u-boot/arch/arm/dts/r8a77960.dtsi
new file mode 100644
index 000000000..60f156cfd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77960.dtsi
@@ -0,0 +1,2972 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M3-W (R8A77960) SoC
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A7796_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a7796";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c_dvfs;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7796_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7796_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7796-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7796";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a7796-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7796-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7796-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7796-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a7796-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a7796", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7796",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7796",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7796-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7796-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a7796-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A7796_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: mmu@fd950000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7796",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a7796",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a7796",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7796-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7796", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x64>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x64>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x64>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x64>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x64>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x64>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible =  "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
+			reg =	<0 0xec500000 0 0x1000>, /* SCU */
+				<0 0xec5a0000 0 0x100>,  /* ADG */
+				<0 0xec540000 0 0x1000>, /* SSIU */
+				<0 0xec541000 0 0x280>,  /* SSI */
+				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7796_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7796",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a7796-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		imr-lx4@fe860000 {
+			compatible = "renesas,r8a7796-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe860000 0 0x2000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 823>;
+		};
+
+		imr-lx4@fe870000 {
+			compatible = "renesas,r8a7796-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe870000 0 0x2000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 822>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm2: cmm@fea60000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea60000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 709>;
+			resets = <&cpg 709>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a7796-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a7796-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a7796-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7796_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7796";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>;
+			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7796-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77965-salvator-x-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77965-salvator-x-u-boot.dts
new file mode 100644
index 000000000..8cbef83b9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77965-salvator-x-u-boot.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the M3N Salvator-XS board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77965-salvator-x.dts"
+#include "r8a77965-u-boot.dtsi"
+
+&rpc {
+	reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+	status = "okay";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+	status = "okay";
+};
+
+&sdhi2 {
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+	status = "okay";
+};
+
+&sdhi3 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+	status = "okay";
+};
+
+&vcc_sdhi0 {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&vcc_sdhi3 {
+	u-boot,off-on-delay-us = <20000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77965-salvator-x.dts b/roms/u-boot/arch/arm/dts/r8a77965-salvator-x.dts
new file mode 100644
index 000000000..660a0240e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77965-salvator-x.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77965";
+	compatible = "renesas,salvator-x", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+&hdmi0_con {
+	remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&rcar_sound {
+	ports {
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
+
+&sound_card {
+	dais = <&rsnd_port0	/* ak4613 */
+		&rsnd_port1>;	/* HDMI0  */
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77965-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a77965-u-boot.dtsi
new file mode 100644
index 000000000..9cc6f2053
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77965-u-boot.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A77965 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/ {
+	soc {
+		rpc: rpc@ee200000 {
+			compatible = "renesas,rpc-r8a77965", "renesas,rpc";
+			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
+			clocks = <&cpg CPG_MOD 917>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+	};
+};
+
+/delete-node/ &ak4613;
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi40;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvi0;
+/delete-node/ &hdmi0;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspb;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspi0;
+
+/ {
+	/delete-node/ cvbs-in;
+	/delete-node/ hdmi-in;
+	/delete-node/ hdmi0-out;
+	/delete-node/ hdmi1-out;
+	/delete-node/ vga-encoder;
+	/delete-node/ vga;
+};
+
+&i2c4 {
+	/delete-node/ video-receiver@70;
+};
+
+/ {
+	soc {
+		/delete-node/ fdp1@fe940000;
+		/delete-node/ fdp1@fe944000;
+		/delete-node/ fdp1@fe948000;
+		/delete-node/ imr-lx4@fe860000;
+		/delete-node/ imr-lx4@fe870000;
+		/delete-node/ imr-lx4@fe880000;
+		/delete-node/ imr-lx4@fe890000;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77965-ulcb-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77965-ulcb-u-boot.dts
new file mode 100644
index 000000000..38966bf64
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77965-ulcb-u-boot.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the ULCB board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77965-ulcb.dts"
+#include "r8a77965-u-boot.dtsi"
+
+/ {
+	cpld {
+		compatible = "renesas,ulcb-cpld";
+		status = "okay";
+		gpio-sck = <&gpio6 8 0>;
+		gpio-mosi = <&gpio6 7 0>;
+		gpio-miso = <&gpio6 10 0>;
+		gpio-sstbz = <&gpio2 3 0>;
+	};
+};
+
+&rpc {
+	reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+	status = "okay";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	max-frequency = <208000000>;
+	status = "okay";
+};
+
+&sdhi2 {
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+	status = "okay";
+};
+
+&vcc_sdhi0 {
+	u-boot,off-on-delay-us = <20000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77965-ulcb.dts b/roms/u-boot/arch/arm/dts/r8a77965-ulcb.dts
new file mode 100644
index 000000000..964078b6c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77965-ulcb.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3NULCB board based on r8a77965";
+	compatible = "renesas,m3nulcb", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77965.dtsi b/roms/u-boot/arch/arm/dts/r8a77965.dtsi
new file mode 100644
index 000000000..c17d90bd1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77965.dtsi
@@ -0,0 +1,2645 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M3-N (R8A77965) SoC
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Based on r8a7796.dtsi
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a77965-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77965-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A77965_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a77965";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c_dvfs;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77965_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>,
+				     <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77965-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a77965";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77965-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77965-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77965-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77965-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77965-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77965", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77965",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77965",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77965-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77965-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a77965-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77965_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77965",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77965",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77965",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77965-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77965", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible =  "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
+			reg =	<0 0xec500000 0 0x1000>, /* SCU */
+				<0 0xec5a0000 0 0x100>,  /* ADG */
+				<0 0xec540000 0 0x1000>, /* SSIU */
+				<0 0xec541000 0 0x280>,  /* SSI */
+				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A77965_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77965",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77965-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77965",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a77965",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a77965",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm3: cmm@fea70000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea70000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 708>;
+			resets = <&cpg 708>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a77965-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77965-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a77965-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A77965_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77965";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>;
+			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a77965-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <2439>;
+
+			trips {
+				target: trip-point1 {
+					/* miliCelsius  */
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77970-eagle-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77970-eagle-u-boot.dts
new file mode 100644
index 000000000..eb868eda4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77970-eagle-u-boot.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Eagle board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77970-eagle.dts"
+#include "r8a77970-u-boot.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		spi0 = &rpc;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+
+};
+
+&phy0 {
+	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+};
+
+&pfc {
+	avb0_pins: avb {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+			function = "avb0";
+		};
+	};
+};
+
+&rpc {
+	num-cs = <1>;
+	status = "okay";
+	spi-max-frequency = <50000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash0: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "s25fs512s", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77970-eagle.dts b/roms/u-boot/arch/arm/dts/r8a77970-eagle.dts
new file mode 100644
index 000000000..2afb91ec9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77970-eagle.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Eagle board
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77970.dtsi"
+
+/ {
+	model = "Renesas Eagle board based on r8a77970";
+	compatible = "renesas,eagle", "renesas,r8a77970";
+
+	aliases {
+		serial0 = &scif0;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	d3p3: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+
+		vcc-supply = <&d3p3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&pfc {
+	avb_pins: avb0 {
+		groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+		function = "avb0";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data_a";
+		function = "canfd0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77970-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a77970-u-boot.dtsi
new file mode 100644
index 000000000..ac3c6be4a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77970-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A77970 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/ {
+	soc {
+		rpc: rpc@ee200000 {
+			compatible = "renesas,rpc-r8a77970", "renesas,rpc";
+			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
+			clocks = <&cpg CPG_MOD 917>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77970.dtsi b/roms/u-boot/arch/arm/dts/r8a77970.dtsi
new file mode 100644
index 000000000..664a73a2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77970.dtsi
@@ -0,0 +1,1205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3M (R8A77970) SoC
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include <dt-bindings/clock/r8a77970-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a77970-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77970";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>;
+			power-domains = <&sysc R8A77970_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>;
+			power-domains = <&sysc R8A77970_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller {
+			compatible = "cache";
+			power-domains = <&sysc R8A77970_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77970-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 22>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 6>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a77970";
+			reg = <0 0xe6060000 0 0x504>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77970-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77970-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77970-rst";
+			reg = <0 0xe6160000 0 0x200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77970-sysc";
+			reg = <0 0xe6180000 0 0x440>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77970";
+			reg = <0 0xe6190000 0 0x10>,
+			      <0 0xe6190100 0 0x120>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77970", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac1 0x97>, <&dmac1 0x96>,
+			       <&dmac2 0x97>, <&dmac2 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac1 0x99>, <&dmac1 0x98>,
+			       <&dmac2 0x99>, <&dmac2 0x98>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 96>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 96>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+			       <&dmac2 0x37>, <&dmac2 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77970-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A77970_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77970_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77970",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_rt 3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+			       <&dmac2 0x57>, <&dmac2 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+			       <&dmac2 0x59>, <&dmac2 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77970", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			dmas = <&dmac1 0x45>, <&dmac1 0x44>,
+			       <&dmac2 0x45>, <&dmac2 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			dmas = <&dmac1 0x47>, <&dmac1 0x46>,
+			       <&dmac2 0x47>, <&dmac2 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77970",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77970",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77970_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77970",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1010000 0 0x1000>,
+			      <0 0xf1020000 0 0x20000>,
+			      <0 0xf1040000 0 0x20000>,
+			      <0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77970-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			vsps = <&vspd0 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77970-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			cooling-maps {
+			};
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77980-condor-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77980-condor-u-boot.dts
new file mode 100644
index 000000000..1b22c7f0b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77980-condor-u-boot.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Condor board
+ *
+ * Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77980-condor.dts"
+#include "r8a77980-u-boot.dtsi"
+
+/ {
+	aliases {
+		spi0 = &rpc;
+	};
+};
+
+&rpc {
+	num-cs = <1>;
+	status = "okay";
+	spi-max-frequency = <50000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash0: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "s25fs512s", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77980-condor.dts b/roms/u-boot/arch/arm/dts/r8a77980-condor.dts
new file mode 100644
index 000000000..3dde028e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77980-condor.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77980.dtsi"
+
+/ {
+	model = "Renesas Condor board based on r8a77980";
+	compatible = "renesas,condor", "renesas,r8a77980";
+
+	aliases {
+		serial0 = &scif0;
+		ethernet0 = &gether;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	d1_8v: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	d3_3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&d3_3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+
+	vddq_vin01: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ_VIN01";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	x1_clk: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&x1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander0: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander1: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		bgvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&vddq_vin01>;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pfc {
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data_a";
+		function = "canfd0";
+	};
+
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	mmc_pins_uhs: mmc_uhs {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77980-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a77980-u-boot.dtsi
new file mode 100644
index 000000000..365d40ac4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77980-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A77980 SoC
+ *
+ * Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/ {
+	soc {
+		rpc: rpc@ee200000 {
+			compatible = "renesas,rpc-r8a77980", "renesas,rpc";
+			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
+			clocks = <&cpg CPG_MOD 917>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77980.dtsi b/roms/u-boot/arch/arm/dts/r8a77980.dtsi
new file mode 100644
index 000000000..b340fb469
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77980.dtsi
@@ -0,0 +1,1602 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3H (R8A77980) SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <dt-bindings/clock/r8a77980-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77980-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77980";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller {
+			compatible = "cache";
+			power-domains = <&sysc R8A77980_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77980-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 22>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 25>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a77980";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77980-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77980-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77980-rst";
+			reg = <0 0xe6160000 0 0x200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77980-sysc";
+			reg = <0 0xe6180000 0 0x440>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77980-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac1 0x9b>, <&dmac1 0x9a>,
+			       <&dmac2 0x9b>, <&dmac2 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+			       <&dmac2 0x37>, <&dmac2 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie-phy@e65d0000 {
+			compatible = "renesas,r8a77980-pcie-phy";
+			reg = <0 0xe65d0000 0 0x8000>;
+			#phy-cells = <0>;
+			clocks = <&cpg CPG_MOD 319>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77980-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A77980_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77980_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77980",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds1 33>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+			       <&dmac2 0x57>, <&dmac2 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+			       <&dmac2 0x59>, <&dmac2 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77980", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			status = "disabled";
+			renesas,id = <1>;
+			resets = <&cpg 810>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi41: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi41vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi41: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi41vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi41: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi41vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi41: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi41vin7>;
+					};
+				};
+			};
+		};
+
+		vin8: video@e6ef8000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			renesas,id = <8>;
+			status = "disabled";
+		};
+
+		vin9: video@e6ef9000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 627>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 627>;
+			renesas,id = <9>;
+			status = "disabled";
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 625>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 625>;
+			renesas,id = <10>;
+			status = "disabled";
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			renesas,id = <11>;
+			status = "disabled";
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 612>;
+			renesas,id = <12>;
+			status = "disabled";
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 608>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 608>;
+			renesas,id = <13>;
+			status = "disabled";
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 605>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 605>;
+			renesas,id = <14>;
+			status = "disabled";
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 604>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 604>;
+			renesas,id = <15>;
+			status = "disabled";
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77980",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77980",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		gether: ethernet@e7400000 {
+			compatible = "renesas,gether-r8a77980";
+			reg = <0 0xe7400000 0 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77980_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: mmu@e7b00000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7b00000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: mmu@e7960000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7960000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77980",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(4) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77980",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77980-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@feab0000 {
+			compatible = "renesas,r8a77980-csi2";
+			reg = <0 0xfeab0000 0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi41vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi41>;
+					};
+					csi41vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi41>;
+					};
+					csi41vin6: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin6csi41>;
+					};
+					csi41vin7: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin7csi41>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77980",
+				     "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			vsps = <&vspd0 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77980-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		thermal-sensor-1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1-passive {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+				sensor1-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		thermal-sensor-2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2-passive {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+				sensor2-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77990-ebisu-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77990-ebisu-u-boot.dts
new file mode 100644
index 000000000..6afc0be66
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77990-ebisu-u-boot.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Ebisu board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77990-ebisu.dts"
+#include "r8a77990-u-boot.dtsi"
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+	status = "okay";
+};
+
+&sdhi0 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	max-frequency = <208000000>;
+};
+
+&sdhi1 {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	max-frequency = <208000000>;
+};
+
+&vcc_sdhi0 {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&vcc_sdhi1 {
+	u-boot,off-on-delay-us = <20000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77990-ebisu.dts b/roms/u-boot/arch/arm/dts/r8a77990-ebisu.dts
new file mode 100644
index 000000000..07a4c9bba
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77990-ebisu.dts
@@ -0,0 +1,754 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the ebisu board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas Ebisu board based on r8a77990";
+	compatible = "renesas,ebisu", "renesas,r8a77990";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 50000>;
+
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
+
+		power-supply = <&reg_12p0v>;
+	};
+
+	cvbs-in {
+		compatible = "composite-video-connector";
+		label = "CVBS IN";
+
+		port {
+			cvbs_con: endpoint {
+				remote-endpoint = <&adv7482_ain7>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		label = "HDMI IN";
+		type = "a";
+
+		port {
+			hdmi_in_con: endpoint {
+				remote-endpoint = <&adv7482_hdmi>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&reg_3p3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "rsnd-ak4613";
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS_CN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	x13_clk: x13 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+		/*
+		 * TX clock internal delay mode is required for reliable
+		 * 1Gbps communication using the KSZ9031RNX phy present on
+		 * the Ebisu board, however, TX clock internal delay mode
+		 * isn't supported on r8a77990.  Thus, limit speed to
+		 * 100Mbps for reliable communication.
+		 */
+		max-speed = <100>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&adv7482_txa>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x13_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	io_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	hdmi-encoder@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
+			     <17 IRQ_TYPE_LEVEL_LOW>;
+
+		port@7 {
+			reg = <7>;
+
+			adv7482_ain7: endpoint {
+				remote-endpoint = <&cvbs_con>;
+			};
+		};
+
+		port@8 {
+			reg = <8>;
+
+			adv7482_hdmi: endpoint {
+				remote-endpoint = <&hdmi_in_con>;
+			};
+		};
+
+		port@a {
+			reg = <10>;
+
+			adv7482_txa: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0x1>;
+		rohm,rstbmode-level;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x13_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	/*
+	 * Even though the LVDS1 output is not connected, the encoder must be
+	 * enabled to supply a pixel clock to the DU for the DPAD output when
+	 * LVDS0 is in use.
+	 */
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x13_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mii";
+			function = "avb";
+		};
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	pwm3_pins: pwm3 {
+		groups = "pwm3_b";
+		function = "pwm3";
+	};
+
+	pwm5_pins: pwm5 {
+		groups = "pwm5_a";
+		function = "pwm5";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout1_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb {
+		groups = "usb0_b", "usb0_id";
+		function = "usb0";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&pwm3 {
+	pinctrl-0 = <&pwm3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
+
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi3 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77990-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a77990-u-boot.dtsi
new file mode 100644
index 000000000..6655abe87
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77990-u-boot.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A77990 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+/ {
+	soc {
+		rpc: rpc@ee200000 {
+			compatible = "renesas,rpc-r8a77990", "renesas,rpc";
+			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
+			clocks = <&cpg CPG_MOD 917>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77990.dtsi b/roms/u-boot/arch/arm/dts/r8a77990.dtsi
new file mode 100644
index 000000000..32d91f210
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77990.dtsi
@@ -0,0 +1,1924 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car E3 (R8A77990) SoC
+ *
+ * Copyright (C) 2018-2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a77990-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77990-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77990";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster1_opp: opp_table10 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <277>;
+			clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77990_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77990-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 11>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 20>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a77990";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77990";
+			reg = <0 0xe60b0000 0 0x15>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77990-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77990-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77990-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77990-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77990";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77990", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6690000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6690000 0 0x40>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1003>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 1003>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77990",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77990-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77990-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77990_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77990",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77990",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77990",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77990-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x5b>, <&dmac0 0x5a>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77990";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint= <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77990";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint= <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible =  "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3";
+			reg =	<0 0xec500000 0 0x1000>, /* SCU */
+				<0 0xec5a0000 0 0x100>,  /* ADG */
+				<0 0xec540000 0 0x1000>, /* SSIU */
+				<0 0xec541000 0 0x280>,  /* SSI */
+				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma0 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma0 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma0 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma0 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77990",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77990-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77990",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77990",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		vspb0: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 626>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 631>;
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77990-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77990-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77990-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77990";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+
+			renesas,cmms = <&cmm0>, <&cmm1>;
+			vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77990-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a77990-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds1_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77995-draak-u-boot.dts b/roms/u-boot/arch/arm/dts/r8a77995-draak-u-boot.dts
new file mode 100644
index 000000000..10fb9cb3b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77995-draak-u-boot.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Draak board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77995-draak.dts"
+#include "r8a77995-u-boot.dtsi"
+
+&rpc {
+	reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0x04000000>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77995-draak.dts b/roms/u-boot/arch/arm/dts/r8a77995-draak.dts
new file mode 100644
index 000000000..67634cb01
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77995-draak.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Draak board
+ *
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+/dts-v1/;
+#include "r8a77995.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas Draak board based on r8a77995";
+	compatible = "renesas,draak", "renesas,r8a77995";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&reg_3p3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x18000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		/*
+		 * TX clock internal delay mode is required for reliable
+		 * 1Gbps communication using the KSZ9031RNX phy present on
+		 * the Draak board, however, TX clock internal delay mode
+		 * isn't supported on r8a77995.  Thus, limit speed to
+		 * 100Mbps for reliable communication.
+		 */
+		max-speed = <100>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x12_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hsusb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	composite-in@20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+
+	};
+
+	hdmi-encoder@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
+		reg-names = "main", "edid", "packet", "cec";
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+		/* Depends on LVDS */
+		max-clock = <135000000>;
+		min-vrefresh = <50>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x12_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	/*
+	 * Even though the LVDS1 output is not connected, the encoder must be
+	 * enabled to supply a pixel clock to the DU for the DPAD output when
+	 * LVDS0 is in use.
+	 */
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x12_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&pfc {
+	avb0_pins: avb {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_mii";
+			function = "avb0";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data_a";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0_c";
+		function = "pwm0";
+	};
+
+	pwm1_pins: pwm1 {
+		groups = "pwm1_c";
+		function = "pwm1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	renesas,no-otg-pins;
+	status = "okay";
+};
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port {
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77995-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a77995-u-boot.dtsi
new file mode 100644
index 000000000..0917a80f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77995-u-boot.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar R8A77995 SoC
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+/ {
+	soc {
+		rpc: rpc@ee200000 {
+			compatible = "renesas,rpc-r8a77995", "renesas,rpc";
+			reg = <0 0xee200000 0 0x100>, <0 0x08000000 0 0>;
+			clocks = <&cpg CPG_MOD 917>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a77995.dtsi b/roms/u-boot/arch/arm/dts/r8a77995.dtsi
new file mode 100644
index 000000000..9503007c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a77995.dtsi
@@ -0,0 +1,1145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car D3 (R8A77995) SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+#include <dt-bindings/clock/r8a77995-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77995-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77995";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77995_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77995_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77995-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 9>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 10>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 21>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 14>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a77995";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77995-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77995-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77995-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77995";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77995", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77995",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77995-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77995-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77995-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
+		};
+
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77995",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77995",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77995",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x64>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x64>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x64>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77995";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77995",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a77995",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vspbs: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 627>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 627>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77995-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77995-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77995";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+
+			renesas,cmms = <&cmm0>, <&cmm1>;
+			vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77995-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a77995-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds1_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			cooling-maps {
+			};
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/r8a779x-u-boot.dtsi b/roms/u-boot/arch/arm/dts/r8a779x-u-boot.dtsi
new file mode 100644
index 000000000..a6bf75182
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/r8a779x-u-boot.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RCar Gen3
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&cpg {
+	u-boot,dm-pre-reloc;
+};
+
+&extal_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&prr {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3036-sdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3036-sdk-u-boot.dtsi
new file mode 100644
index 000000000..754800c6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3036-sdk-u-boot.dtsi
@@ -0,0 +1,13 @@
+#include "rk3036-u-boot.dtsi"
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3036-sdk.dts b/roms/u-boot/arch/arm/dts/rk3036-sdk.dts
new file mode 100644
index 000000000..3493150df
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3036-sdk.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "SDK-RK3036";
+	compatible = "sdk,sdk-rk3036", "rockchip,rk3036";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+        hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&usb_host {
+	vbus-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_otg {
+	vbus-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_otg {
+		otg_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3036-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3036-u-boot.dtsi
new file mode 100644
index 000000000..41ac054b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3036-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rockchip-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3036.dtsi b/roms/u-boot/arch/arm/dts/rk3036.dtsi
new file mode 100644
index 000000000..75588de48
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3036.dtsi
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3036";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		i2c1 = &i2c1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+        arm-pmu {
+                compatible = "arm,cortex-a7-pmu";
+                interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-affinity = <&cpu0>, <&cpu1>;
+        };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3036-smp";
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			resets = <&cru SRST_CORE0>;
+		};
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+                pdma: pdma@20078000 {
+                        compatible = "arm,pl330", "arm,primecell";
+                        reg = <0x20078000 0x4000>;
+                        arm,pl330-broken-no-flushp;
+                        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                        #dma-cells = <1>;
+                        clocks = <&cru ACLK_DMAC2>;
+                        clock-names = "apb_pclk";
+                };
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	uart0: serial@20060000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	};
+
+	uart1: serial@20064000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+	};
+
+	uart2: serial@20068000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+	};
+
+	pwm0: pwm@20050000 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm@20050010 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	sram: sram@10080000 {
+		compatible = "rockchip,rk3036-smp-sram", "mmio-sram";
+		reg = <0x10080000 0x2000>;
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	grf: syscon@20008000 {
+		compatible = "rockchip,rk3036-grf", "syscon";
+		reg = <0x20008000 0x1000>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
+		status = "disabled";
+	};
+
+	usb_host: usb@101c0000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		status = "disabled";
+	};
+
+	emmc: dwmmc@1021c000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		clock-frequency = <37500000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+		<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x1021c000 0x4000>;
+		broken-cd;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		mmc-ddr-1_8v;
+		disable-wp;
+		fifo-mode;
+		non-removable;
+		num-slots = <1>;
+		default-sample-phase = <158>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	};
+
+	sdmmc: dwmmc@10214000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		clock-frequency = <37500000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3036-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		emmc {
+			/*
+			 * We run eMMC at max speed; bump up drive strength.
+			 * We also have external pulls, so disable the internal ones.
+			 */
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+						<1 25 RK_FUNC_2 &pcfg_pull_none>,
+						<1 26 RK_FUNC_2 &pcfg_pull_none>,
+						<1 27 RK_FUNC_2 &pcfg_pull_none>;
+				/*
+						<1 28 RK_FUNC_2 &pcfg_pull_up>,
+						<1 29 RK_FUNC_2 &pcfg_pull_up>,
+						<1 30 RK_FUNC_2 &pcfg_pull_up>,
+						<1 31 RK_FUNC_2 &pcfg_pull_up>;
+						*/
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
+						<0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart1 */
+		};
+
+                uart2 {
+                        uart2_xfer: uart2-xfer {
+                                rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+                                                <1 19 RK_FUNC_2 &pcfg_pull_none>;
+                        };
+                        /* no rts / cts for uart2 */
+                };
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 27 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+
+	i2c1: i2c@20056000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3128-evb.dts b/roms/u-boot/arch/arm/dts/rk3128-evb.dts
new file mode 100644
index 000000000..2fb2b0da6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3128-evb.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+
+#include "rk3128.dtsi"
+
+/ {
+	model = "Rockchip RK3128 Evaluation board";
+	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	vbus-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&emmc {
+	fifo-mode;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_otg {
+		otg_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3128.dtsi b/roms/u-boot/arch/arm/dts/rk3128.dtsi
new file mode 100644
index 000000000..5d2499c13
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3128.dtsi
@@ -0,0 +1,803 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3128-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3128";
+	rockchip,sram = <&sram>;
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		spi0 = &spi0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3128-smp";
+
+		cpu0:cpu@0x000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x000>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1:cpu@0x001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x001>;
+		};
+
+		cpu2:cpu@0x002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x002>;
+		};
+
+		cpu3:cpu@0x003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x003>;
+		};
+	};
+
+	cpu_axi_bus: cpu_axi_bus {
+		compatible = "rockchip,cpu_axi_bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		qos {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			crypto {
+				reg = <0x10128080 0x20>;
+			};
+
+			core {
+				reg = <0x1012a000 0x20>;
+			};
+
+			peri {
+				reg = <0x1012c000 0x20>;
+			};
+
+			gpu {
+				reg = <0x1012d000 0x20>;
+			};
+
+			vpu {
+				reg = <0x1012e000 0x20>;
+			};
+
+			rga {
+				reg = <0x1012f000 0x20>;
+			};
+			ebc {
+				reg = <0x1012f080 0x20>;
+			};
+
+			iep {
+				reg = <0x1012f100 0x20>;
+			};
+
+			lcdc {
+				reg = <0x1012f180 0x20>;
+				rockchip,priority = <3 3>;
+			};
+
+			vip {
+				reg = <0x1012f200 0x20>;
+				rockchip,priority = <3 3>;
+			};
+		};
+
+		msch {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			msch@10128000 {
+				reg = <0x10128000 0x20>;
+				rockchip,read-latency = <0x3f>;
+			};
+		};
+	};
+
+	psci {
+		compatible      = "arm,psci";
+		method          = "smc";
+		cpu_suspend     = <0x84000001>;
+		cpu_off         = <0x84000002>;
+		cpu_on          = <0x84000003>;
+		migrate         = <0x84000005>;
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma: pdma@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			arm,pl330-broken-no-flushp;//2
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	xin12m: xin12m {
+		compatible = "fixed-clock";
+		clocks = <&xin24m>;
+		clock-frequency = <12000000>;
+		clock-output-names = "xin12m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	timer@20044000 {
+		compatible = "arm,armv7-timer";
+		reg = <0x20044000 0xb8>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,broadcast = <1>;
+	};
+
+	watchdog: wdt@2004c000 {
+		compatible = "rockchip,watch dog";
+		reg = <0x2004c000 0x100>;
+		clock-names = "pclk_wdt";
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,irq = <1>;
+		rockchip,timeout = <60>;
+		rockchip,atboot = <1>;
+		rockchip,debug = <0>;
+	};
+
+	reset: reset@20000110 {
+		compatible = "rockchip,reset";
+		reg = <0x20000110 0x24>;
+		#reset-cells = <1>;
+	};
+
+	nandc: nandc@10500000 {
+		compatible = "rockchip,rk-nandc";
+		reg = <0x10500000 0x4000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nandc_ale &nandc_cle &nandc_wrn &nandc_rdn &nandc_rdy &nandc_cs0 &nandc_data>;
+		nandc_id = <0>;
+		clocks = <&cru SCLK_NANDC>,
+			 <&cru HCLK_NANDC>,
+			 <&cru SRST_NANDC>;
+		clock-names = "clk_nandc", "g_clk_nandc", "hclk_nandc";
+	};
+
+	dmc: dmc@20004000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3128-dmc", "syscon";
+		reg = <0x0 0x20004000 0x0 0x1000>;
+	};
+
+	cru: clock-controller@20000000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3128-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	uart0: serial0@20060000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		dmas = <&pdma 2>, <&pdma 3>;
+		#dma-cells = <2>;
+	};
+
+	uart1: serial1@20064000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		dmas = <&pdma 4>, <&pdma 5>;
+		#dma-cells = <2>;
+	};
+
+	uart2: serial2@20068000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		dmas = <&pdma 6>, <&pdma 7>;
+		#dma-cells = <2>;
+	};
+
+	saradc: saradc@2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	pwm0: pwm0@20050000 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+	};
+
+	pwm1: pwm1@20050010 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+	};
+
+	pwm2: pwm2@20050020 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+	};
+
+	pwm3: pwm3@20050030 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+	};
+
+	sram: sram@10080400 {
+		compatible = "rockchip,rk3128-smp-sram", "mmio-sram";
+		reg = <0x10080400 0x1C00>;
+		map-exec;
+		map-cacheable;
+	};
+
+	pmu: syscon@100a0000 {
+		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
+		reg = <0x100a0000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	u2phy: usb2-phy {
+		compatible = "rockchip,rk3128-usb2phy";
+		reg = <0x017c 0x0c>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_OTGPHY0>;
+		clock-names = "phyclk";
+		#clock-cells = <0>;
+		clock-output-names = "usb480m_phy";
+		#phy-cells = <1>;
+		status = "disabled";
+
+		u2phy_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "otg-bvalid", "otg-id",
+					  "linestate";
+			status = "disabled";
+		};
+
+		u2phy_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "linestate";
+			status = "disabled";
+		};
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3128-usb", "rockchip,rk3288-usb",
+			     "snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "otg";
+		g-use-dma;
+		hnp-srp-disable;
+		phys = <&u2phy 0>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@101c0000 {
+		compatible = "generic-ehci";
+		reg = <0x101c0000 0x20000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&u2phy 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@101e0000 {
+		compatible = "generic-ohci";
+		reg = <0x101e0000 0x20000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&u2phy 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@10214000 {
+		compatible = "rockchip,rk312x-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		max-frequency = <150000000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@1021c000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		max-frequency = <150000000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		bus-width = <8>;
+		default-sample-phase = <158>;
+		num-slots = <1>;
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	i2c0: i2c0@20072000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+	};
+
+	i2c1: i2c1@20056000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+	};
+
+	i2c2: i2c2@2005a000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+	};
+
+	i2c3: i2c3@2005e000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005e000 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+	};
+
+	spi0: spi@20074000 {
+		compatible = "rockchip,rk3128-spi", "rockchip,rk3288-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_txd_mux0 &spi0_rxd_mux0 &spi0_clk_mux0 &spi0_cs0_mux0 &spi0_cs1_mux0>;
+		rockchip,spi-src-clk = <0>;
+		num-cs = <2>;
+		clocks =<&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spi","pclk_spi0";
+		dmas = <&pdma 8>, <&pdma 9>;
+		#dma-cells = <2>;
+		dma-names = "tx", "rx";
+	};
+
+	grf: syscon@20008000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3128-grf", "syscon";
+		reg = <0x20008000 0x1000>;
+	};
+
+	pinctrl: pinctrl@20008000 {
+		compatible = "rockchip,rk3128-pinctrl";
+		reg = <0x20008000 0xA8>,
+		      <0x200080A8 0x4C>,
+		      <0x20008118 0x20>,
+		      <0x20008100 0x04>;
+		reg-names = "base", "mux", "pull", "drv";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio2@20088000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20088000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		emmc {
+			/*
+			 * We run eMMC at max speed; bump up drive strength.
+			 * We also have external pulls, so disable the internal ones.
+			 */
+
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins = <2 5 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+						<1 25 RK_FUNC_2 &pcfg_pull_none>,
+						<1 26 RK_FUNC_2 &pcfg_pull_none>,
+						<1 27 RK_FUNC_2 &pcfg_pull_none>,
+						<1 28 RK_FUNC_2 &pcfg_pull_none>,
+						<1 29 RK_FUNC_2 &pcfg_pull_none>,
+						<1 30 RK_FUNC_2 &pcfg_pull_none>,
+						<1 31 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		nandc{
+			nandc_ale:nandc-ale {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_cle:nandc-cle {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_wrn:nandc-wrn {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_rdn:nandc-rdn {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_rdy:nandc-rdy {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_cs0:nandc-cs0 {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_data: nandc-data {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
+						<0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+				<1 19 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_wp: sdmmc-wp {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_pwren: sdmmc-pwren {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up>,
+						<1 RK_PC3 1 &pcfg_pull_up>,
+						<1 RK_PC4 1 &pcfg_pull_up>,
+						<1 RK_PC5 1 &pcfg_pull_up>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 27 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+						<0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 20 3 &pcfg_pull_none>,
+						<2 21 3 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_txd_mux0:spi0-txd-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			spi0_rxd_mux0:spi0-rxd-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			spi0_clk_mux0:spi0-clk-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			spi0_cs0_mux0:spi0-cs0-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			spi0_cs1_mux0:spi0-cs1-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3188-radxarock-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3188-radxarock-u-boot.dtsi
new file mode 100644
index 000000000..204bb3a90
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3188-radxarock-u-boot.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3188-u-boot.dtsi"
+
+&cru {
+	u-boot,dm-spl;
+};
+
+&pinctrl {
+	u-boot,dm-spl;
+};
+
+&mmc0 {
+	fifo-mode;
+	max-frequency = <16000000>;
+};
+
+&mmc1 {
+	fifo-mode;
+	max-frequency = <16000000>;
+};
+
+&emmc {
+	fifo-mode;
+	max-frequency = <16000000>;
+};
+
+&uart2 {
+	status = "okay";
+	u-boot,dm-spl;
+};
+
+&timer3 {
+	compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
+	u-boot,dm-spl;
+	clock-frequency = <24000000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3188-radxarock.dts b/roms/u-boot/arch/arm/dts/rk3188-radxarock.dts
new file mode 100644
index 000000000..61367126b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3188-radxarock.dts
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+#include "rk3188-radxarock-u-boot.dtsi"
+
+/ {
+	model = "Radxa Rock";
+	compatible = "radxa,rock", "rockchip,rk3188";
+
+	chosen {
+/*		stdout-path = &uart2; */
+		stdout-path = "serial2:115200n8";
+	};
+
+	config {
+		u-boot,dm-pre-reloc;
+		u-boot,boot-led = "rock:red:power";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "rock:green:user1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue {
+			label = "rock:blue:user2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		sleep {
+			label = "rock:red:power";
+			gpios = <&gpio0 15 0>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	ir_recv: gpio-ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 10 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_recv_pin>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd0: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
+		0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
+		0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
+		0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
+		0x4 0x0>;
+	rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
+		0x220 0x40 0x0 0x0>;
+	rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
+};
+
+&emac {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+		system-power-controller;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&act8846_dvs0_ctl>;
+
+		vp1-supply = <&vsys>;
+		vp2-supply = <&vsys>;
+		vp3-supply = <&vsys>;
+		vp4-supply = <&vsys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vsys>;
+		inl3-supply = <&vsys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG2 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: REG3 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG4 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG5 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_hdmi: REG6 {
+				regulator-name = "VDD_HDMI";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vcc18: REG7 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_rmii: REG9 {
+				regulator-name = "VCC_RMII";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccio_wl: REG10 {
+				regulator-name = "VCCIO_WL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC18_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc28: REG12 {
+				regulator-name = "VCC_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	num-slots = <1>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		act8846_dvs0_ctl: act8846-dvs0-ctl {
+			rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lan8720a  {
+		phy_int: phy-int {
+			rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir-receiver {
+		ir_recv_pin: ir-recv-pin {
+			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sd0 {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3188-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3188-u-boot.dtsi
new file mode 100644
index 000000000..41ac054b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3188-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rockchip-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3188.dtsi b/roms/u-boot/arch/arm/dts/rk3188.dtsi
new file mode 100644
index 000000000..7bcca6a02
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3188.dtsi
@@ -0,0 +1,604 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3188-cru.h>
+#include "rk3xxx.dtsi"
+
+/ {
+	compatible = "rockchip,rk3188";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+			operating-points = <
+				/* kHz    uV */
+				1608000 1350000
+				1416000 1250000
+				1200000 1150000
+				1008000 1075000
+				 816000  975000
+				 600000  950000
+				 504000  925000
+				 312000  875000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x3>;
+		};
+	};
+
+	sram: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x8000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x0 0x50>;
+		};
+	};
+
+	i2s0: i2s@1011a000 {
+		compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
+		status = "disabled";
+	};
+
+	spdif: sound@1011e000 {
+		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+		reg = <0x1011e000 0x2000>;
+		#sound-dai-cells = <0>;
+		clock-names = "hclk", "mclk";
+		clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+		dmas = <&dmac1_s 8>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	efuse: efuse@20010000 {
+		compatible = "rockchip,rockchip-efuse";
+		reg = <0x20010000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
+	timer3: timer@2000e000 {
+		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
+		reg = <0x2000e000 0x20>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	usbphy: phy {
+		compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy@10c {
+			#phy-cells = <0>;
+			reg = <0x10c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+
+		usbphy1: usb-phy@11c {
+			#phy-cells = <0>;
+			reg = <0x11c>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3188-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2000a000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2000a000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@2003c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003c000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@2003e000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003e000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg_pull_up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg_pull_down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg_pull_none {
+			bias-disable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_rst: emmc-rst {
+				rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			/*
+			 * The data pins are shared between nandc and emmc and
+			 * not accessible through pinctrl. Also they should've
+			 * been already set correctly by firmware, as
+			 * flash/emmc is the boot-device.
+			 */
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
+						<RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
+						<RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
+						<RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, /* rxd0 */
+						<RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
+						<RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
+						<RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
+						<RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; /* crs_dvalid */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>,
+						<RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>,
+						<RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_out: pwm0-out {
+				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_out: pwm1-out {
+				rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_out: pwm2-out {
+				rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_out: pwm3-out {
+				rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
+						<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
+						<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
+						<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
+						<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		sd0 {
+			sd0_clk: sd0-clk {
+				rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_cmd: sd0-cmd {
+				rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_cd: sd0-cd {
+				rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_wp: sd0-wp {
+				rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_pwr: sd0-pwr {
+				rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_bus1: sd0-bus-width1 {
+				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_bus4: sd0-bus-width4 {
+				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		sd1 {
+			sd1_clk: sd1-clk {
+				rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_cmd: sd1-cmd {
+				rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_cd: sd1-cd {
+				rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_wp: sd1-wp {
+				rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_bus1: sd1-bus-width1 {
+				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_bus4: sd1-bus-width4 {
+				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
+
+&emac {
+	compatible = "rockchip,rk3188-emac";
+};
+
+&global_timer {
+	interrupts = <GIC_PPI 11 0xf04>;
+};
+
+&grf {
+	compatible = "rockchip,rk3188-grf", "syscon";
+};
+
+&local_timer {
+	interrupts = <GIC_PPI 13 0xf04>;
+};
+
+&i2c0 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_xfer>;
+};
+
+&i2c1 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_xfer>;
+};
+
+&i2c2 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_xfer>;
+};
+
+&i2c3 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_xfer>;
+};
+
+&i2c4 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer>;
+};
+
+&pmu {
+	compatible = "rockchip,rk3188-pmu", "syscon";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_out>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_out>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_out>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_out>;
+};
+
+&spi0 {
+	compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+};
+
+&spi1 {
+	compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+};
+
+&uart0 {
+	compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+};
+
+&uart1 {
+	compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+};
+
+&uart2 {
+	compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_xfer>;
+};
+
+&uart3 {
+	compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_xfer>;
+};
+
+&wdt {
+	compatible = "rockchip,rk3188-wdt", "snps,dw-wdt";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3229-evb.dts b/roms/u-boot/arch/arm/dts/rk3229-evb.dts
new file mode 100644
index 000000000..632cdc9bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3229-evb.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk322x.dtsi"
+
+/ {
+	model = "Rockchip RK3229 Evaluation board";
+	compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	ext_gmac: ext_gmac {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x96 0xC8 0x1F3 0xF 0x8000004D 0x4 0x4E 0x6 0x3
+		0x0 0x6 0x5 0xC 0x10 0x6 0x4 0x4
+		0x5 0x4 0x200 0x3 0xA 0x40 0x0 0x1
+		0x5 0x5 0x3 0xC 0x1E 0x100 0x0 0x4
+		0x0 0x924>;
+	rockchip,phy-timing = <0x220 0x1 0x0 0x0 0x0 0x4 0x60>;
+	rockchip,sdram-params = <0x428B188 0x0 0x21 0x472 0x15
+		0 300 3 0 120>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	supports-sd;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb20_otg {
+       status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk322x.dtsi b/roms/u-boot/arch/arm/dts/rk322x.dtsi
new file mode 100644
index 000000000..4a8be5dab
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk322x.dtsi
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			resets = <&cru SRST_CORE2>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			resets = <&cru SRST_CORE3>;
+		};
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@110f0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x110f0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	bus_intmem@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x9000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x9000>;
+		smp-sram@0 {
+			compatible = "rockchip,rk322x-smp-sram";
+			reg = <0x00 0x10>;
+		};
+		ddr_sram: ddr-sram@1000 {
+			compatible = "rockchip,rk322x-ddr-sram";
+			reg = <0x1000 0x8000>;
+		};
+	};
+
+	i2s1: i2s1@100b0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100b0000 0x4000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+		dmas = <&pdma 14>, <&pdma 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		status = "disabled";
+	};
+
+	i2s0: i2s0@100c0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100c0000 0x4000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+		dmas = <&pdma 11>, <&pdma 12>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s2: i2s2@100e0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100e0000 0x4000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	grf: syscon@11000000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3228-grf", "syscon";
+		reg = <0x11000000 0x1000>;
+	};
+
+	uart0: serial@11010000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11010000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart1: serial@11020000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11020000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@11030000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11030000 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart21_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@11050000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11050000 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11060000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11060000 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11070000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11070000 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@11080000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11080000 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@110b0000 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@110b0010 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@110b0020 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@110b0030 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	timer: timer@110c0000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0x110c0000 0x20>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	cru: clock-controller@110e0000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3228-cru";
+		reg = <0x110e0000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT 6>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@11150000 {
+		compatible = "rockchip,rk3228-tsadc";
+		reg = <0x11150000 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <0>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@30000000 {
+		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30000000 0x4000>;
+		max-frequency = <150000000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@30010000 {
+		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30010000 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@30020000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		reg = <0x30020000 0x4000>;
+		max-frequency = <150000000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		bus-width = <8>;
+		default-sample-phase = <158>;
+		num-slots = <1>;
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	usb20_otg: usb@30040000 {
+		compatible = "rockchip,rk3229-usb", "rockchip,rk3288-usb",
+			     "snps,dwc2";
+		reg = <0x30040000 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		hnp-srp-disable;
+		dr_mode = "otg";
+		status = "disabled";
+	};
+
+	gmac: ethernet@30200000 {
+		compatible = "rockchip,rk3228-gmac";
+		reg = <0x30200000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			<&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>,
+			<&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+			<&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			"mac_clk_tx", "clk_mac_ref",
+			"clk_mac_refout", "aclk_mac",
+			"pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x2000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3228-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@11110000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11110000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@11120000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11120000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@11130000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11130000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@11140000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11140000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<1 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<1 20 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<1 21 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<3 3 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<3 4 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<3 5 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA7 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 RK_PC6 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PD0 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD1 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD2 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD3 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD6 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD7 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC3 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC2 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC6 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC7 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PB1 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PB5 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC5 RK_FUNC_2 &pcfg_pull_none>,
+						<2 RK_PC4 RK_FUNC_2 &pcfg_pull_none>,
+						<2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC3 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC2 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PB5 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			phy_pins: phy-pins {
+				rockchip,pins = <2 RK_PB6 RK_FUNC_2 &pcfg_pull_none>,
+						<2 RK_PB0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA0 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PA1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PA7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <0 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<1 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+						<1 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
+						<1 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PD6 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <1 RK_PB4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <1 RK_PB3 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PD0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 RK_PC1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+						<1 RK_PB2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PB0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PB3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PC2 RK_FUNC_2 &pcfg_pull_up>,
+						<1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			uart2_cts: uart2-cts {
+				rockchip,pins = <0 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart2_rts: uart2-rts {
+				rockchip,pins = <0 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2-1 {
+			uart21_xfer: uart21-xfer {
+				rockchip,pins = <1 10 RK_FUNC_2 &pcfg_pull_up>,
+						<1 9 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+	};
+
+	dmc: dmc@11200000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3228-dmc", "syscon";
+		rockchip,cru = <&cru>;
+		rockchip,grf = <&grf>;
+		rockchip,msch = <&service_msch>;
+		reg = <0x11200000 0x3fc
+		       0x12000000 0x400>;
+		rockchip,sram = <&ddr_sram>;
+	};
+
+	service_msch: syscon@31090000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3228-msch", "syscon";
+		reg = <0x31090000 0x2000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-evb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-evb-u-boot.dtsi
new file mode 100644
index 000000000..8ac7840f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-evb-u-boot.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3288-u-boot.dtsi"
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio8 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc_bus4 {
+	u-boot,dm-spl;
+};
+
+&sdmmc_clk {
+	u-boot,dm-spl;
+};
+
+&sdmmc_cmd {
+	u-boot,dm-spl;
+};
+
+&sdmmc_pwr {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-evb.dts b/roms/u-boot/arch/arm/dts/rk3288-evb.dts
new file mode 100644
index 000000000..eac91a873
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-evb.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	model = "Evb-RK3288";
+	compatible = "evb-rk3288,evb-rk3288", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x2>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-evb.dtsi b/roms/u-boot/arch/arm/dts/rk3288-evb.dtsi
new file mode 100644
index 000000000..04902c0bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-evb.dtsi
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button@0 {
+			gpio-key,wakeup = <1>;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <116>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_5v: usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host_5v: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <50>;
+		pwms = <&pwm0 0 25000 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		pwm-delay-us = <10000>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		compatible = "simple-panel";
+		power-supply = <&vcc_io>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio7>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_hold>;
+		system-power-controller;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "vcca_codec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_tp: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "vccio_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdio0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
+	vmmc-supply = <&vcc_18>;
+	status = "disabled";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&mipi_dsi0 {
+	status = "disabled";
+	rockchip,panel = <&panel>;
+	display-timings {
+		timing0 {
+		bits-per-pixel = <24>;
+		clock-frequency = <160000000>;
+		hfront-porch = <120>;
+		hsync-len = <20>;
+		hback-porch = <21>;
+		hactive = <1200>;
+		vfront-porch = <21>;
+		vsync-len = <3>;
+		vback-porch = <18>;
+		vactive = <1920>;
+		hsync-active = <0>;
+		vsync-active = <0>;
+		de-active = <1>;
+		pixelclk-active = <0>;
+		};
+	};
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-firefly-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-firefly-u-boot.dtsi
new file mode 100644
index 000000000..8b9c38310
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-firefly-u-boot.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3288-u-boot.dtsi"
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio8 {
+	u-boot,dm-pre-reloc;
+};
+
+&pcfg_pull_up_drv_12ma {
+	u-boot,dm-spl;
+};
+
+&sdmmc_bus4 {
+	u-boot,dm-spl;
+};
+
+&sdmmc_clk {
+	u-boot,dm-spl;
+};
+
+&sdmmc_cmd {
+	u-boot,dm-spl;
+};
+
+&sdmmc_pwr {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-firefly.dts b/roms/u-boot/arch/arm/dts/rk3288-firefly.dts
new file mode 100644
index 000000000..1cff04e7c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-firefly.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3288-firefly.dtsi"
+
+/ {
+	model = "Firefly-RK3288";
+	compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	config {
+		u-boot,dm-pre-reloc;
+		u-boot,boot-led = "firefly:green:power";
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	/* Add a dummy value to cause of-platdata think this is bytes */
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+&ir {
+	gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl {
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-firefly.dtsi b/roms/u-boot/arch/arm/dts/rk3288-firefly.dtsi
new file mode 100644
index 000000000..b7f279f70
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-firefly.dtsi
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button@0 {
+			gpio-key,wakeup = <1>;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <116>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	leds {
+		u-boot,dm-pre-reloc;
+		compatible = "gpio-leds";
+
+		work {
+			u-boot,dm-pre-reloc;
+			gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:user";
+			linux,default-trigger = "rc-feedback";
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led>;
+		};
+
+		power {
+			u-boot,dm-pre-reloc;
+			gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+			label = "firefly:green:power";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_5v: usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host_5v: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio7>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_18: REG7 {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led: work-led {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbhub_rst: usbhub-rst {
+			rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdio0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
+	vmmc-supply = <&vcc_18>;
+	status = "disabled";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhub_rst>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-miqi-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-miqi-u-boot.dtsi
new file mode 100644
index 000000000..4f63fc9f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-miqi-u-boot.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3288-u-boot.dtsi"
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc_bus4 {
+	u-boot,dm-spl;
+};
+
+&sdmmc_clk {
+	u-boot,dm-spl;
+};
+
+&sdmmc_cmd {
+	u-boot,dm-spl;
+};
+
+&sdmmc_pwr {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-miqi.dts b/roms/u-boot/arch/arm/dts/rk3288-miqi.dts
new file mode 100644
index 000000000..e47170c65
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-miqi.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3288-miqi.dtsi"
+
+/ {
+	model = "mqmaker MiQi";
+	compatible = "mqmaker,miqi", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-miqi.dtsi b/roms/u-boot/arch/arm/dts/rk3288-miqi.dtsi
new file mode 100644
index 000000000..432f744be
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-miqi.dtsi
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcca_33>;
+		flash0-supply = <&vcc_flash>;
+		flash1-supply = <&vcc_lan>;
+		gpio30-supply = <&vcc_io>;
+		gpio1830-supply = <&vcc_io>;
+		lcdc-supply = <&vcc_io>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vcc_18>;
+	};
+
+
+	leds {
+		u-boot,dm-pre-reloc;
+		compatible = "gpio-leds";
+
+		work {
+			u-boot,dm-pre-reloc;
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			label = "miqi:green:user";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_18: REG7 {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	leds {
+		led_ctl: led-ctl {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	vbus-supply = <&vcc_host>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-phycore-rdk.dts b/roms/u-boot/arch/arm/dts/rk3288-phycore-rdk.dts
new file mode 100644
index 000000000..cc3921095
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-phycore-rdk.dts
@@ -0,0 +1,289 @@
+/*
+ * Device tree file for Phytec PCM-947 carrier board
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "rk3288-phycore-som.dtsi"
+
+/ {
+	model = "Phytec RK3288 PCM-947";
+	compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	user_buttons: user-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_button_pins>;
+
+		button@0 {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+
+		button@1 {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+	};
+
+	vcc_host0_5v: usb-host0-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host0_vbus_drv>;
+		regulator-name = "vcc_host0_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_in_otg_out>;
+	};
+
+	vcc_host1_5v: usb-host1-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host1_vbus_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_in_otg_out>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_in_otg_out>;
+	};
+};
+
+&dmc {
+	rockchip,num-channels = <2>;
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xe 0xe>;
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 5 1>;
+};
+
+&gmac {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		reg = <0x64>;
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_rtc_int>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <10 0>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c_eeprom_cb: eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	buttons {
+		user_button_pins: user-button-pins {
+			/* button 1 */
+			rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>,
+			/* button 2 */
+					<8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rv4162 {
+		i2c_rtc_int: i2c-rtc-int {
+			rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on pcm-947 board so bump up to 12 mA.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touchscreen {
+		ts_irq_pin: ts-irq-pin {
+			rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host0_vbus_drv: host0-vbus-drv {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		host1_vbus_drv: host1-vbus-drv {
+			rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vdd_io_sd>;
+	vqmmc-supply = <&vdd_io_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-phycore-som.dtsi b/roms/u-boot/arch/arm/dts/rk3288-phycore-som.dtsi
new file mode 100644
index 000000000..02d11968c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-phycore-som.dtsi
@@ -0,0 +1,514 @@
+/*
+ * Device tree file for Phytec phyCORE-RK3288 SoM
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "rk3288.dtsi"
+
+/ {
+	model = "Phytec RK3288 phyCORE";
+	compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
+	/*
+	 * Set the minimum memory size here and
+	 * let the bootloader set the real size.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0 0x8000000>;
+	};
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &rk818;
+		eeprom0 = &i2c_eeprom_id;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	io_domains: io_domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+
+		status = "okay";
+		sdcard-supply = <&vdd_io_sd>;
+		flash0-supply = <&vdd_emmc_io>;
+		flash1-supply = <&vdd_misc_1v8>;
+		gpio1830-supply = <&vdd_3v3_io>;
+		gpio30-supply = <&vdd_3v3_io>;
+		bb-supply = <&vdd_3v3_io>;
+		dvp-supply = <&vdd_3v3_io>;
+		lcdc-supply = <&vdd_3v3_io>;
+		wifi-supply = <&vdd_3v3_io>;
+		audio-supply = <&vdd_3v3_io>;
+	};
+
+	leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led>;
+
+		user {
+			label = "green_led";
+			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "keep";
+		};
+	};
+
+	vdd_emmc_io: vdd-emmc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_emmc_io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_3v3_io>;
+	};
+
+	vdd_in_otg_out: vdd-in-otg-out {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_in_otg_out";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_misc_1v8: vdd-misc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_misc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+	operating-points = <
+		/* KHz    uV */
+		1800000	1400000
+		1608000	1350000
+		1512000 1300000
+		1416000 1200000
+		1200000 1100000
+		1008000 1050000
+		 816000 1000000
+		 696000  950000
+		 600000  900000
+		 408000  900000
+		 312000  900000
+		 216000  900000
+		 126000  900000
+	>;
+};
+
+&emmc {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vdd_3v3_io>;
+	vqmmc-supply = <&vdd_emmc_io>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins &phy_rst &phy_int>;
+	phy-handle = <&phy0>;
+	phy-supply = <&vdd_eth_2v5>;
+	phy-mode = "rgmii-id";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	tx_delay = <0x0>;
+	rx_delay = <0x0>;
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			enet-phy-lane-no-swap;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	clock-frequency = <400000>;
+
+	rk818: pmic@1c {
+		status = "okay";
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		boost-supply = <&vdd_in_otg_out>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vdd_misc_1v8>;
+		vcc8-supply = <&vdd_misc_1v8>;
+		vcc9-supply = <&vdd_3v3_io>;
+		vddio-supply = <&vdd_3v3_io>;
+
+		regulators {
+			u-boot,dm-pre-reloc;
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_3v3_io: DCDC_REG4 {
+				regulator-name = "vdd_3v3_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_sys: DCDC_BOOST {
+				regulator-name = "vdd_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			/* vcc9 */
+			vdd_sd: SWITCH_REG {
+				regulator-name = "vdd_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* vcc6 */
+			vdd_eth_2v5: LDO_REG2 {
+				regulator-name = "vdd_eth_2v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2500000>;
+				};
+			};
+
+			/* vcc7 */
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			/* vcc8 */
+			vdd_1v8_lcd_ldo: LDO_REG4 {
+				regulator-name = "vdd_1v8_lcd_ldo";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* vcc8 */
+			vdd_1v0_lcd: LDO_REG6 {
+				regulator-name = "vdd_1v0_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			/* vcc7 */
+			vdd_1v8_ldo: LDO_REG7 {
+				regulator-name = "vdd_1v8_ldo";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* vcc9 */
+			vdd_io_sd: LDO_REG9 {
+				regulator-name = "vdd_io_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+		};
+	};
+
+	/* M24C32-D */
+	i2c_eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	/* M24C32-D Identification page */
+	i2c_eeprom_id: eeprom@58 {
+		compatible = "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+	};
+
+	vdd_cpu: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1430000>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vdd_sys>;
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emmc {
+		/*
+		 * We run eMMC at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		emmc_clk: emmc-clk {
+			rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>;
+		};
+
+		emmc_cmd: emmc-cmd {
+			rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>;
+		};
+
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>,
+					<3 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
+					<3 2 RK_FUNC_2 &pcfg_pull_none_12ma>,
+					<3 3 RK_FUNC_2 &pcfg_pull_none_12ma>,
+					<3 4 RK_FUNC_2 &pcfg_pull_none_12ma>,
+					<3 5 RK_FUNC_2 &pcfg_pull_none_12ma>,
+					<3 6 RK_FUNC_2 &pcfg_pull_none_12ma>,
+					<3 7 RK_FUNC_2 &pcfg_pull_none_12ma>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	leds {
+		user_led: user-led {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		/* Pin for switching state between sleep and non-sleep state */
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vdd_1v8_ldo>;
+};
+
+&spi2 {
+	status = "okay";
+
+	serial_flash: flash@0 {
+		compatible = "micron,n25q128a13", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		status = "okay";
+	};
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-popmetal-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-popmetal-u-boot.dtsi
new file mode 100644
index 000000000..8ac7840f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-popmetal-u-boot.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3288-u-boot.dtsi"
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio8 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc_bus4 {
+	u-boot,dm-spl;
+};
+
+&sdmmc_clk {
+	u-boot,dm-spl;
+};
+
+&sdmmc_cmd {
+	u-boot,dm-spl;
+};
+
+&sdmmc_pwr {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-popmetal.dts b/roms/u-boot/arch/arm/dts/rk3288-popmetal.dts
new file mode 100644
index 000000000..5c6d06f2f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-popmetal.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3288-popmetal.dtsi"
+
+/ {
+	model = "PopMetal-RK3288";
+	compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-popmetal.dtsi b/roms/u-boot/arch/arm/dts/rk3288-popmetal.dtsi
new file mode 100644
index 000000000..63785eb55
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-popmetal.dtsi
@@ -0,0 +1,547 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	memory{
+		device_type = "memory";
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcca_33>;
+		bb-supply = <&vcc_io>;
+		dvp-supply = <&vcc18_dvp>;
+		flash0-supply = <&vcc_flash>;
+		flash1-supply = <&vcc_lan>;
+		gpio30-supply = <&vcc_io>;
+		gpio1830-supply = <&vcc_io>;
+		lcdc-supply = <&vcc_io>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vccio_wl>;
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
+	 * by the dvp_pwr pin.
+	 */
+	vcc18_dvp: vcc18-dvp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc18-dvp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc28_dvp>;
+	};
+
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc5v0_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lan: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			ldo5: LDO_REG5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "ldo5";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_33: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_33";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vccio_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ak8963: ak8963@0d {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0d>;
+		interrupt-parent = <&gpio8>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&comp_int>;
+	};
+
+	l3g4200d: l3g4200d@68 {
+		compatible = "st,l3g4200d-gyro";
+		st,drdy-int-pin = <2>;
+		reg = <0x6b>;
+	};
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio8>;
+		interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	ak8963 {
+		comp_int: comp-int {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	mma8452 {
+		gsensor_int: gsensor-int {
+			rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host1 {
+	vbus-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-rock-pi-n8-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-rock-pi-n8-u-boot.dtsi
new file mode 100644
index 000000000..538607dd7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-rock-pi-n8-u-boot.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3288-u-boot.dtsi"
+
+/{
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x2>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-rock-pi-n8.dts b/roms/u-boot/arch/arm/dts/rk3288-rock-pi-n8.dts
new file mode 100644
index 000000000..c9894a60e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-rock-pi-n8.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3288.dtsi"
+#include <rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3288-vmarc-som.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi N8";
+	compatible = "radxa,rockpi-n8", "vamrs,rk3288-vmarc-som",
+		     "rockchip,rk3288";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-rock2-som.dtsi b/roms/u-boot/arch/arm/dts/rk3288-rock2-som.dtsi
new file mode 100644
index 000000000..1ece66f3e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-rock2-som.dtsi
@@ -0,0 +1,278 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vccio_pmu>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins &phy_rst>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	rx_delay = <0x10>;
+	tx_delay = <0x30>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		system-power-controller;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-name = "vdd_gpu";
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emmc {
+			emmc_reset: emmc-reset {
+				rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	gmac {
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO  &pcfg_output_high>;
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-rock2-square.dts b/roms/u-boot/arch/arm/dts/rk3288-rock2-square.dts
new file mode 100644
index 000000000..11c580a0b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-rock2-square.dts
@@ -0,0 +1,199 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-rock2-som.dtsi"
+
+/ {
+	model = "Radxa Rock 2 Square";
+	compatible = "radxa,rock2-square", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	vcc_usb_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		/* Always on as the rockchip usb phy doesn't have a vbus-supply
+		 * property
+		 */
+		regulator-always-on;
+		regulator-name = "vcc_host";
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;	/* wp not hooked up */
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+	reg-shift = <2>;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+&gpio7 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-thermal.dtsi b/roms/u-boot/arch/arm/dts/rk3288-thermal.dtsi
new file mode 100644
index 000000000..87dd8142d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-thermal.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for RK3288 SoC thermal
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+reserve_thermal: reserve_thermal {
+	polling-delay-passive = <1000>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+			/* sensor	ID */
+	thermal-sensors = <&tsadc	0>;
+
+};
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <100>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+			/* sensor	ID */
+	thermal-sensors = <&tsadc	1>;
+	linux,hwmon;
+
+	trips {
+		cpu_alert0: cpu_alert0 {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert1: cpu_alert1 {
+			temperature = <75000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <100000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT 6>;
+		};
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <100>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+			/* sensor	ID */
+	thermal-sensors = <&tsadc	2>;
+	linux,hwmon;
+
+	trips {
+		gpu_alert0: gpu_alert0 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_crit: gpu_crit {
+			temperature = <100000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&gpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
new file mode 100644
index 000000000..a177fca73
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Amarula Solutions SRO
+ */
+
+#include "rk3288-u-boot.dtsi"
+#include "rk3288-tinker-u-boot.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = \
+			"same-as-spl", &sdmmc, &emmc;
+	};
+};
+
+&emmc {
+	u-boot,dm-spl;
+};
+
+&emmc_clk {
+	u-boot,dm-spl;
+};
+
+&emmc_cmd {
+	u-boot,dm-spl;
+};
+
+&emmc_pwr {
+	u-boot,dm-spl;
+};
+
+&emmc_bus8 {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-tinker-s.dts b/roms/u-boot/arch/arm/dts/rk3288-tinker-s.dts
new file mode 100644
index 000000000..cc7ac5f88
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-tinker-s.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+	model = "Rockchip RK3288 Asus Tinker Board S";
+	compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	max-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-tinker-u-boot.dtsi
new file mode 100644
index 000000000..56d10c82e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-tinker-u-boot.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3288-u-boot.dtsi"
+
+&dmc {
+	u-boot,dm-pre-reloc;
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x2>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
+};
+
+&i2c2 {
+	m24c08@50 {
+		compatible = "at,24c08", "i2c-eeprom";
+		reg = <0x50>;
+	};
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2_xfer {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	u-boot,dm-spl;
+};
+
+&gpio7 {
+	u-boot,dm-spl;
+};
+
+&vcc_sd {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_none_drv_8ma {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up_drv_8ma {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_none {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up {
+	u-boot,dm-spl;
+};
+
+&sdmmc_bus4 {
+	u-boot,dm-spl;
+};
+
+&sdmmc_cd {
+	u-boot,dm-spl;
+};
+
+&sdmmc_clk {
+	u-boot,dm-spl;
+};
+
+&sdmmc_cmd {
+	u-boot,dm-spl;
+};
+
+&sdmmc_pwr {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-tinker.dts b/roms/u-boot/arch/arm/dts/rk3288-tinker.dts
new file mode 100644
index 000000000..8b1848c31
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-tinker.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3288-tinker.dtsi"
+
+/ {
+	model = "Tinker-RK3288";
+	compatible = "rockchip,rk3288-tinker", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&pinctrl {
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&usb_host1 {
+	vbus-supply = <&vcc5v0_host>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-tinker.dtsi b/roms/u-boot/arch/arm/dts/rk3288-tinker.dtsi
new file mode 100644
index 000000000..2f816af47
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-tinker.dtsi
@@ -0,0 +1,531 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		act-led {
+			gpios=<&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger="mmc0";
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
+	 * vcc_io directly.  Those boards won't be able to power cycle SD cards
+	 * but it shouldn't hurt to toggle this pin there anyway.
+	 */
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc5v0_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;			/* wp not hooked up */
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+	supports-sd;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc33_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc18_ldo1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc18_ldo1: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_ldo1";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_mipi: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_mipi";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_codec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc33_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	headset: nau8825@1a {
+		compatible = "nuvoton,nau8825";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		nuvoton,jkdet-enable = <1>;
+		nuvoton,jkdet-pull-enable = <1>;
+		nuvoton,jkdet-pull-up = <0>;
+		nuvoton,jkdet-polarity = <1>;
+		nuvoton,vref-impedance = <2>;
+		nuvoton,micbias-voltage = <6>;
+		nuvoton,sar-threshold-num = <4>;
+		nuvoton,sar-threshold = <0xa 0x14 0x26 0x73>;
+		nuvoton,sar-hysteresis = <0>;
+		nuvoton,sar-voltage = <6>;
+		nuvoton,sar-compare-time = <0>;
+		nuvoton,sar-sampling-time = <0>;
+		nuvoton,short-key-debounce = <3>;
+		nuvoton,jack-insert-debounce = <7>;
+		nuvoton,jack-eject-debounce = <7>;
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S0_OUT>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc18_ldo1>;
+	status ="okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status= "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on EVB board so bump up to 8ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pwr_3g: pwr-3g {
+			rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-u-boot.dtsi
new file mode 100644
index 000000000..e3c6c10f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-u-boot.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rockchip-u-boot.dtsi"
+#include "rockchip-optee.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = \
+			"same-as-spl", &emmc, &sdmmc;
+	};
+};
+
+#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
+&binman {
+	rom {
+		filename = "u-boot.rom";
+		size = <0x400000>;
+		pad-byte = <0xff>;
+
+		mkimage {
+			args = "-n rk3288 -T rkspi";
+			u-boot-spl {
+			};
+		};
+		u-boot-img {
+			offset = <0x20000>;
+		};
+		u-boot {
+			offset = <0x300000>;
+		};
+		fdtmap {
+		};
+	};
+};
+#endif
+
+&dmc {
+	u-boot,dm-pre-reloc;
+};
+
+&pmu {
+	u-boot,dm-pre-reloc;
+};
+
+&sgrf {
+	u-boot,dm-pre-reloc;
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&vopb {
+	u-boot,dm-pre-reloc;
+};
+
+&vopl {
+	u-boot,dm-pre-reloc;
+};
+
+&noc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio7 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-veyron-chromebook.dtsi b/roms/u-boot/arch/arm/dts/rk3288-veyron-chromebook.dtsi
new file mode 100644
index 000000000..143eaae26
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-veyron-chromebook.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Veyron (and derivatives) board device tree source
+ *
+ * Copyright 2014 Google, Inc
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288-veyron.dtsi"
+
+/ {
+	aliases {
+		i2c20 = &i2c_tunnel;
+		video0 = &vopl;
+		video1 = &vopb;
+	};
+
+	gpio_keys: gpio-keys {
+		pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
+		lid {
+			label = "Lid";
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <0>; /* SW_LID */
+			linux,input-type = <5>; /* EV_SW */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+                };
+	};
+
+	gpio-charger {
+		compatible = "gpio-charger";
+		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ac_present_ap>;
+		charger-type = "mains";
+	};
+
+	/* A non-regulated voltage from power supply or battery */
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vccsys";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc33_sys: vcc33-sys {
+		vin-supply = <&vccsys>;
+	};
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vccsys>;
+	};
+
+	/* This turns on vbus for host1 (dwc2) */
+	vcc5_host1: vcc5-host1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host1_pwr_en>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This turns on vbus for otg for host mode (dwc2) */
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbotg_pwren_h>;
+		regulator-name = "vcc5_host2";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rk808 {
+	regulators {
+		vcc33_ccd: LDO_REG8 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "vcc33_ccd";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	spi-activate-delay = <100>;
+	spi-max-frequency = <3000000>;
+	spi-deactivate-delay = <200>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		spi-max-frequency = <3000000>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		ec-interrupt = <&gpio7 7 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_int>;
+		reg = <0>;
+		google,cros-ec-spi-pre-delay = <30>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	trackpad@15 {
+		compatible = "elan,i2c_touchpad";
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int>;
+		reg = <0x15>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
+	buttons {
+		ap_lid_int_l: ap-lid-int-l {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	charger {
+		ac_present_ap: ac-present-ap {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	cros-ec {
+		ec_int: ec-int {
+			rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_wp_gpio: sdmmc-wp-gpio {
+			rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	suspend {
+		suspend_l_wake: suspend-l-wake {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		suspend_l_sleep: suspend-l-sleep {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	trackpad {
+		trackpad_int: trackpad-int {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb-host {
+		host1_pwr_en: host1-pwr-en {
+			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbotg_pwren_h: usbotg-pwren-h {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3288-veyron-jerry.dts b/roms/u-boot/arch/arm/dts/rk3288-veyron-jerry.dts
new file mode 100644
index 000000000..c251d9d59
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-veyron-jerry.dts
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Veyron Jerry Rev 3+ board device tree source
+ *
+ * Copyright 2014 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Jerry";
+	compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+		     "google,veyron-jerry-rev3", "google,veyron-jerry",
+		     "google,veyron", "rockchip,rk3288";
+
+        chosen {
+                stdout-path = &uart2;
+        };
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+
+	sound {
+		compatible = "rockchip,audio-max98090-jerry";
+
+		cpu {
+			sound-dai = <&i2s 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>;
+		};
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+&gpio_keys {
+	power {
+		gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&backlight {
+	power-supply = <&backlight_regulator>;
+};
+
+&panel {
+	power-supply= <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	regulators {
+		mic_vcc: LDO_REG2 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-name = "mic_vcc";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&sdmmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+	disable-wp;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&edp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	edp {
+		edp_hpd: edp_hpd {
+			rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
+		};
+	};
+
+	emmc {
+		/* Make sure eMMC is not in reset */
+		emmc_deassert_reset: emmc-deassert-reset {
+			rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/*
+	 * Trackpad pin control is shared between Elan and Synaptics devices
+	 * so we have to pull it up to the bus level.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer &trackpad_int>;
+
+	trackpad@15 {
+		compatible = "elan,i2c_touchpad";
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		/*
+		 * Remove the inherited pinctrl settings to avoid clashing
+		 * with bus-wide ones.
+		 */
+		/delete-property/pinctrl-names;
+		/delete-property/pinctrl-0;
+		reg = <0x15>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-veyron-mickey.dts b/roms/u-boot/arch/arm/dts/rk3288-veyron-mickey.dts
new file mode 100644
index 000000000..e0dc36206
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-veyron-mickey.dts
@@ -0,0 +1,277 @@
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+	model = "Google Mickey";
+	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+		     "google,veyron-mickey-rev0", "google,veyron-mickey",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+	};
+};
+
+&cpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		cpu_alert_almost_warm: cpu_alert_almost_warm {
+			temperature = <63000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_warm: cpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_almost_hot: cpu_alert_almost_hot {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hot: cpu_alert_hot {
+			temperature = <82000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hotter: cpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_very_hot: cpu_alert_very_hot {
+			temperature = <85000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
+		 * and don't let the GPU go faster than 400 MHz.  Note that we
+		 * won't throttle the GPU lower than 400 MHz due to CPU
+		 * heat--we'll let the GPU do the rest itself.
+		 */
+		cpu_warm_limit_cpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT 4>;
+		};
+
+		/*
+		 * Add some discrete steps to help throttling system deal
+		 * with the fact that there are two passive cooling devices:
+		 * the CPU and the GPU.
+		 *
+		 * - 1.2 GHz - 1.0 GHz (almost hot)
+		 * - 800 MHz           (hot)
+		 * - 800 MHz - 696 MHz (hotter)
+		 * - 696 MHz - min     (very hot)
+		 *
+		 * Note:
+		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
+		 *   some pretty serious workload here and be happy.
+		 * - After 696 MHz we stop lowering voltage, so throttling
+		 *   past there is less effective.
+		 */
+		cpu_almost_hot_limit_cpu {
+			trip = <&cpu_alert_almost_hot>;
+			cooling-device =
+				<&cpu0 5 6>;
+		};
+		cpu_hot_limit_cpu {
+			trip = <&cpu_alert_hot>;
+			cooling-device =
+				<&cpu0 7 7>;
+		};
+		cpu_hotter_limit_cpu {
+			trip = <&cpu_alert_hotter>;
+			cooling-device =
+				<&cpu0 7 8>;
+		};
+		cpu_very_hot_limit_cpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device =
+				<&cpu0 8 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x2>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 1>;
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2s {
+	status = "okay";
+	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+	/delete-property/ vcc12-supply;
+
+	vcc11-supply = <&vcc33_sys>;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+		/delete-node/ LDO_REG7;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_lcd: LDO_REG8 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-name = "vcc18_lcd";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&pinctrl {
+	hdmi {
+		power_hdmi_on: power-hdmi-on {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&sdmmc {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&sdmmc {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&usb_host0_ehci {
+	status = "disabled";
+};
+
+&usb_host1 {
+	status = "disabled";
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&power_hdmi_on>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-veyron-minnie.dts b/roms/u-boot/arch/arm/dts/rk3288-veyron-minnie.dts
new file mode 100644
index 000000000..646f6ae74
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-veyron-minnie.dts
@@ -0,0 +1,313 @@
+/*
+ * Google Veyron Minnie Rev 0+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+	model = "Google Minnie";
+	compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	sound {
+		compatible = "rockchip,audio-max98090-jerry";
+
+		cpu {
+			sound-dai = <&i2s 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>;
+		};
+	};
+};
+
+&backlight {
+	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
+	brightness-levels = <
+			  0   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+	power-supply = <&backlight_regulator>;
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x1>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 6 533000000 6 13 0>;
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_h &ap_lid_int_l &volum_down_l &volum_up_l>;
+
+	volum_down {
+		label = "Volum_down";
+		gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEDOWN>;
+		debounce-interval = <100>;
+	};
+
+	volum_up {
+		label = "Volum_up";
+		gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEUP>;
+		debounce-interval = <100>;
+	};
+};
+
+&i2c_tunnel {
+	battery: bq27500@55 {
+		compatible = "ti,bq27500";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&vcc33_touch>;
+		vccio-supply = <&vcc33_touch>;
+	};
+};
+
+&panel {
+	compatible = "auo,b101ean01", "simple-panel";
+	power-supply= <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+
+	regulators {
+		vcc33_touch: LDO_REG2 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "vcc33_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc5v_touch: SWITCH_REG2 {
+			regulator-name = "vcc5v_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		volum_down_l: volum-down-l {
+			rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		volum_up_l: volum-up-l {
+			rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	prochot {
+		gpio_prochot: gpio-prochot {
+			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touchscreen {
+		touch_int: touch-int {
+			rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		touch_rst: touch-rst {
+			rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-veyron-speedy-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-veyron-speedy-u-boot.dtsi
new file mode 100644
index 000000000..251fbdee7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-veyron-speedy-u-boot.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2015 Google, Inc
+ */
+
+#include "rk3288-veyron-u-boot.dtsi"
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x1>;
+	rockchip,sdram-params = <0x20D266A4 0x5B6 6 533000000 6 13 0>;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-veyron-speedy.dts b/roms/u-boot/arch/arm/dts/rk3288-veyron-speedy.dts
new file mode 100644
index 000000000..58c1fe96e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-veyron-speedy.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Speedy Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+#include "rk3288-veyron-speedy-u-boot.dtsi"
+
+/ {
+	model = "Google Speedy";
+	compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+};
+
+&backlight {
+	power-supply = <&backlight_regulator>;
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
+&edp {
+	/delete-property/pinctrl-names;
+	/delete-property/pinctrl-0;
+
+	force-hpd;
+};
+
+&panel {
+	power-supply = <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-veyron-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-veyron-u-boot.dtsi
new file mode 100644
index 000000000..899fe6e7a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-veyron-u-boot.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2015 Google, Inc
+ */
+
+#include "rk3288-u-boot.dtsi"
+
+&gpio7 {
+	u-boot,dm-pre-reloc;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/rk3288-veyron.dtsi b/roms/u-boot/arch/arm/dts/rk3288-veyron.dtsi
new file mode 100644
index 000000000..8754043b9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-veyron.dtsi
@@ -0,0 +1,840 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Veyron (and derivatives) board device tree source
+ *
+ * Copyright 2014 Google, Inc
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+		u-boot,spl-boot-order = &spi_flash;
+	};
+
+	firmware {
+		chromeos {
+			pinctrl-names = "default";
+			pinctrl-0 = <&fw_wp_ap>;
+			write-protect-gpio = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+		backlight-boot-off;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 0>;
+	};
+
+	panel: panel {
+		compatible ="cnm,n116bgeea2","simple-panel";
+		status = "okay";
+		power-supply = <&vcc33_lcd>;
+		backlight = <&backlight>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_h>;
+		power {
+			label = "Power";
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			gpio-key,wakeup;
+		};
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_warm_reset_h>;
+		priority = /bits/ 8 <200>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "rockchip,rockchip-audio-max98090";
+		rockchip,model = "ROCKCHIP-I2S";
+		rockchip,i2s-controller = <&i2s>;
+		rockchip,audio-codec = <&max98090>;
+		rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+		rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		rockchip,headset-codec = <&headsetcodec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_det>, <&hp_det>;
+	};
+
+	vdd_logic: pwm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 2000 0>;
+
+		voltage-table = <1350000 0>,
+				<1300000 10>,
+				<1250000 20>,
+				<1200000 31>,
+				<1150000 41>,
+				<1100000 52>,
+				<1050000 62>,
+				<1000000 72>,
+				< 950000 83>;
+
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-name = "vdd_logic";
+		regulator-ramp-delay = <4000>;
+	};
+
+	vcc33_sys: vcc33-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vccsys>;
+	};
+
+	vcc_5v: vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	bt_regulator: bt-regulator {
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card pouplated):
+		 * - BT_I2S_WS_BT_RFDISABLE_L
+		 * - No connect
+		 */
+
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable_l>;
+		regulator-name = "bt_regulator";
+	};
+
+	wifi_regulator: wifi-regulator {
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		regulator-name = "wifi_regulator";
+
+		/* Faux input supply.  See bt_regulator description. */
+		vin-supply = <&bt_regulator>;
+	};
+
+	io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcc18_codec>;
+		bb-supply = <&vcc33_io>;
+		dvp-supply = <&vcc_18>;
+		flash0-supply = <&vcc18_flashio>;
+		gpio1830-supply = <&vcc33_io>;
+		gpio30-supply = <&vcc33_io>;
+		lcdc-supply = <&vcc33_lcd>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vcc18_wl>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&dmc {
+	logic-supply = <&vdd_logic>;
+	rockchip,odt-disable-freq = <333000000>;
+	rockchip,dll-disable-freq = <333000000>;
+	rockchip,sr-enable-freq = <333000000>;
+	rockchip,pd-enable-freq = <666000000>;
+	rockchip,auto-self-refresh-cnt = <0>;
+	rockchip,auto-power-down-cnt = <64>;
+	rockchip,ddr-speed-bin = <21>;
+	rockchip,trcd = <10>;
+	rockchip,trp = <10>;
+	operating-points = <
+		/* KHz    uV */
+		200000 1050000
+		333000 1100000
+		533000 1150000
+		666000 1200000
+	>;
+};
+
+&efuse {
+	status = "okay";
+};
+
+&emmc {
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>;
+	status = "okay";
+};
+
+&sdio0 {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cap-sdio-irq;
+	card-external-vcc-supply = <&wifi_regulator>;
+	clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>,
+		 <&cru SCLK_SDIO0_SAMPLE>, <&rk808 RK808_CLKOUT1>;
+	clock-names = "biu", "ciu", "ciu_drv", "ciu_sample", "card_ext_clock";
+	keep-power-in-suspend;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+	status = "okay";
+	vmmc-supply = <&vcc33_sys>;
+	vqmmc-supply = <&vcc18_wl>;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+	num-slots = <1>;
+	status = "okay";
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&spi2 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	spi_flash: spiflash@0 {
+		u-boot,dm-pre-reloc;
+		compatible = "spidev", "jedec,spi-nor";
+		spi-max-frequency = <20000000>; /* Reduce for Dediprog em100 pro */
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
+	i2c-scl-rising-time-ns = <100>;		/* 45ns measured */
+	u-boot,dm-pre-reloc;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		clock-output-names = "xin32k", "wifibt_32kin";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		reg = <0x1b>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		vcc1-supply = <&vcc33_sys>;
+		vcc2-supply = <&vcc33_sys>;
+		vcc3-supply = <&vcc33_sys>;
+		vcc4-supply = <&vcc33_sys>;
+		vcc6-supply = <&vcc_5v>;
+		vcc7-supply = <&vcc33_sys>;
+		vcc8-supply = <&vcc33_sys>;
+		vcc9-supply = <&vcc_5v>;
+		vcc10-supply = <&vcc33_sys>;
+		vcc11-supply = <&vcc_5v>;
+		vcc12-supply = <&vcc_18>;
+
+		vddio-supply = <&vcc33_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6001>;
+				regulator-suspend-mem-disabled;
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-ramp-delay = <6001>;
+				regulator-suspend-mem-disabled;
+			};
+
+			vcc135_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc135_ddr";
+				regulator-suspend-mem-enabled;
+			};
+
+			/*
+			 * vcc_18 has several aliases.  (vcc18_flashio and
+			 * vcc18_wl).  We'll add those aliases here just to
+			 * make it easier to follow the schematic.  The signals
+			 * are actually hooked together and only separated for
+			 * power measurement purposes).
+			 */
+			vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-suspend-mem-microvolt = <1800000>;
+			};
+
+			/*
+			 * Note that both vcc33_io and vcc33_pmuio are always
+			 * powered together. To simplify the logic in the dts
+			 * we just refer to vcc33_io every time something is
+			 * powered from vcc33_pmuio. In fact, on later boards
+			 * (such as danger) they're the same net.
+			 */
+			vcc33_io: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_io";
+				regulator-suspend-mem-microvolt = <3300000>;
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-suspend-mem-microvolt = <1000000>;
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-suspend-mem-disabled;
+			};
+
+			vcc33_sd: LDO_REG5 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_sd";
+				regulator-suspend-mem-disabled;
+			};
+
+			vcc18_codec: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_codec";
+				regulator-suspend-mem-disabled;
+			};
+
+			vdd10_lcd_pwren_h: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vdd10_lcd_pwren_h";
+				regulator-suspend-mem-disabled;
+			};
+
+			vcc33_lcd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lcd";
+				regulator-suspend-mem-disabled;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
+	i2c-scl-rising-time-ns = <100>;		/* 40ns measured */
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 100kHz since 4.7k resistors don't rise fast enough */
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <50>;		/* 10ns measured */
+	i2c-scl-rising-time-ns = <800>;		/* 600ns measured */
+
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		#sound-dai-cells = <0>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&int_codec>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 11ns measured */
+	i2c-scl-rising-time-ns = <300>;		/* 225ns measured */
+
+	headsetcodec: ts3a227e@3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts3a227e_int_l>;
+		ti,micbias = <7>;		/* MICBIAS = 2.8V */
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <300>;
+	i2c-scl-rising-time-ns = <1000>;
+};
+
+&i2s {
+	status = "okay";
+	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+
+	/* Pins don't include flow control by default; add that in */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	/* We need to go faster than 24MHz, so adjust clock parents / rates */
+	assigned-clocks = <&cru SCLK_UART0>;
+	assigned-clock-rates = <48000000>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+	reg-shift = <2>;
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&edp {
+	status = "okay";
+	rockchip,panel = <&panel>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_audio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&tsadc {
+	tsadc-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	tsadc-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&bt_dev_wake_sleep
+	>;
+
+	/* Add this for sdmmc pins to SD card */
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwr_key_h: pwr-key-h {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	codec {
+		hp_det: hp-det {
+			rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		int_codec: int-codec {
+			rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		mic_det: mic-det {
+			rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/*
+		 * We run eMMC at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		emmc_clk: emmc-clk {
+			rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc_cmd: emmc-cmd {
+			rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+	};
+
+	headset {
+		ts3a227e_int_l: ts3a227e-int-l {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			/*
+			 * Causes jerry to hang when probing bus 0
+			 * rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+			 */
+		};
+	};
+
+	reboot {
+		ap_warm_reset_h: ap-warm-reset-h {
+			rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio0 {
+		wifi_enable_h: wifienable-h {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* NOTE: mislabelled on schematic; should be bt_enable_h */
+		bt_enable_l: bt-enable-l {
+			rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/*
+		 * We run sdio0 at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		/*
+		 * These pins are only present on very new veyron boards; on
+		 * older boards bt_dev_wake is simply always high.  Note that
+		 * gpio4_26 is a NC on old veyron boards, so it doesn't hurt
+		 * to map this pin everywhere
+		 */
+		bt_dev_wake_sleep: bt-dev-wake-sleep {
+			rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		bt_dev_wake_awake: bt-dev-wake-awake {
+			rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * We run sdmmc at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		/*
+		 * Builtin CD line is hooked to ground to prevent JTAG at boot
+		 * (and also to get the voltage rail correct).  Make we
+		 * configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
+		 * think there's a card inserted
+		 */
+		sdmmc_cd_disabled: sdmmc-cd-disabled {
+			rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* This is where we actually hook up CD */
+		sdmmc_cd_gpio: sdmmc-cd-gpio {
+			rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tpm {
+		tpm_int_h: tpm-int-h {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	write-protect {
+		fw_wp_ap: fw-wp-ap {
+			rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+	needs-reset-on-resume;
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
+	assigned-clock-parents = <&cru SCLK_OTGPHY0>;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio8 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-vmarc-som.dtsi b/roms/u-boot/arch/arm/dts/rk3288-vmarc-som.dtsi
new file mode 100644
index 000000000..717cb3dc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-vmarc-som.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+	compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
+
+	vccio_flash: vccio-flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	phy-supply = <&vcc_io>;
+	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG1 {
+				regulator-name = "vcc_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_codec: LDO_REG2 {
+				regulator-name = "vcca_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_wl: LDO_REG4 {
+				regulator-name = "vcc_wl";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-name = "vcc18_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-name = "vcc_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-vyasa-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
new file mode 100644
index 000000000..7730d1722
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3288-u-boot.dtsi"
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	/* Add a dummy value to cause of-platdata think this is bytes */
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288-vyasa.dts b/roms/u-boot/arch/arm/dts/rk3288-vyasa.dts
new file mode 100644
index 000000000..4193f7208
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288-vyasa.dts
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+#include "rk3288.dtsi"
+
+/ {
+	model = "Amarula Vyasa-RK3288";
+	compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x0 0x0 0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	dc12_vbat: dc12-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "dc12_vbat";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vboot_3v3: vboot-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vboot_5v: vboot-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_sv";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	v3g_3v3: v3g-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3g_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vsus_5v: vsus-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vsus_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc50_hdmi_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+	vusb1_5v: vusb1-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb1_5v";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
+	vusb2_5v: vusb2-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb2_5v";
+		enable-active-high;
+		gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_tp: LDO_REG1 {
+				regulator-name = "vcc_tp";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_codec: LDO_REG2 {
+				regulator-name = "vcc_codec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_gps: LDO_REG4 {
+				regulator-name = "vcc_gps";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy_pwr_en>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb_host {
+		phy_pwr_en: phy-pwr-en {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		usb2_pwr_en: usb2-pwr-en {
+			rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3288.dtsi b/roms/u-boot/arch/arm/dts/rk3288.dtsi
new file mode 100644
index 000000000..22bb06cec
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3288.dtsi
@@ -0,0 +1,1588 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include <dt-bindings/power-domain/rk3288.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/video/rk3288.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288";
+
+	interrupt-parent = <&gic>;
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		gpio8 = &gpio8;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio0;
+		mmc3 = &sdio1;
+		mshc0 = &emmc;
+		mshc1 = &sdmmc;
+		mshc2 = &sdio0;
+		mshc3 = &sdio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
+		rockchip,pmu = <&pmu>;
+
+		cpu0: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x500>;
+			operating-points = <
+				/* KHz    uV */
+				1800000 1400000
+				1704000 1350000
+				1608000 1300000
+				1512000 1250000
+				1416000 1200000
+				1200000 1100000
+				1008000 1050000
+				 816000 1000000
+				 696000  950000
+				 600000  900000
+				 408000  900000
+				 216000  900000
+				 126000  900000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			resets = <&cru SRST_CORE0>;
+		};
+		cpu@501 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x501>;
+			resets = <&cru SRST_CORE1>;
+		};
+		cpu@502 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x502>;
+			resets = <&cru SRST_CORE2>;
+		};
+		cpu@503 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x503>;
+			resets = <&cru SRST_CORE3>;
+		};
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dmac_peri: dma-controller@ff250000 {
+			compatible = "arm,pl330", "arm,primecell";
+			broken-no-flushp;
+			reg = <0xff250000 0x4000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+
+		dmac_bus_ns: dma-controller@ff600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			broken-no-flushp;
+			reg = <0xff600000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dmac_bus_s: dma-controller@ffb20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			broken-no-flushp;
+			reg = <0xffb20000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC1>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+	        arm,use-physical-timer;
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+		always-on;
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopl_out>, <&vopb_out>;
+	};
+
+	sdmmc: dwmmc@ff0c0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xff0c0000 0x4000>;
+		status = "disabled";
+	};
+
+	sdio0: dwmmc@ff0d0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xff0d0000 0x4000>;
+		status = "disabled";
+	};
+
+	sdio1: dwmmc@ff0e0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
+			 <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xff0e0000 0x4000>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@ff0f0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xff0f0000 0x4000>;
+		status = "disabled";
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,saradc";
+		reg = <0xff100000 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		status = "disabled";
+	};
+
+	spi0: spi@ff110000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 11>, <&dmac_peri 12>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		reg = <0xff110000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff120000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 13>, <&dmac_peri 14>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		reg = <0xff120000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff130000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 15>, <&dmac_peri 16>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		reg = <0xff130000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff140000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff140000 0x1000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff150000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff150000 0x1000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff160000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff160000 0x1000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff170000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff170000 0x1000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		status = "disabled";
+	};
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff180000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff190000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff690000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff690000 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff1b0000 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff1c0000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff1c0000 0x100>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer>;
+		status = "disabled";
+	};
+	thermal: thermal-zones {
+		#include "rk3288-thermal.dtsi"
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3288-tsadc";
+		reg = <0xff280000 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "otp_out";
+		pinctrl-0 = <&otp_out>;
+		#thermal-sensor-cells = <1>;
+		hw-shut-temp = <125000>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff290000 {
+		compatible = "rockchip,rk3288-gmac";
+		reg = <0xff290000 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			"mac_clk_rx", "mac_clk_tx",
+			"clk_mac_ref", "clk_mac_refout",
+			"aclk_mac", "pclk_mac";
+	};
+
+	usb_host0_ehci: usb@ff500000 {
+		compatible = "generic-ehci";
+		reg = <0xff500000 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		clock-names = "usbhost";
+		phys = <&usbphy1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	/* NOTE: doesn't work on RK3288, but fixed on RK3288W */
+	usb_host0_ohci: usb@ff520000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff520000 0x0 0x100>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		phys = <&usbphy1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1: usb@ff540000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0xff540000 0x40000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST1>;
+		clock-names = "otg";
+		phys = <&usbphy2>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_otg: usb@ff580000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0xff580000 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		phys = <&usbphy0>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_hsic: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0xff5c0000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HSIC>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	dmc: dmc@ff610000 {
+		compatible = "rockchip,rk3288-dmc", "syscon";
+		rockchip,cru = <&cru>;
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+		rockchip,sgrf = <&sgrf>;
+		rockchip,noc = <&noc>;
+		reg = <0xff610000 0x3fc
+		       0xff620000 0x294
+		       0xff630000 0x3fc
+		       0xff640000 0x294>;
+		rockchip,sram = <&ddr_sram>;
+		clocks = <&cru PCLK_DDRUPCTL0>, <&cru PCLK_PUBL0>,
+			 <&cru PCLK_DDRUPCTL1>, <&cru PCLK_PUBL1>,
+			 <&cru ARMCLK>;
+		clock-names = "pclk_ddrupctl0", "pclk_publ0",
+			      "pclk_ddrupctl1", "pclk_publ1",
+			      "arm_clk";
+	};
+
+	i2c0: i2c@ff650000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff650000 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff660000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff660000 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff680000 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0xff680000 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff680010 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0xff680010 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff680020 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0xff680020 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff680030 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0xff680030 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	bus_intmem@ff700000 {
+		compatible = "mmio-sram";
+		reg = <0xff700000 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff700000 0x18000>;
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+		ddr_sram: ddr-sram@1000 {
+			compatible = "rockchip,rk3288-ddr-sram";
+			reg = <0x1000 0x4000>;
+		};
+	};
+
+	sram@ff720000 {
+		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+		reg = <0xff720000 0x1000>;
+	};
+
+	pmu: power-management@ff730000 {
+		compatible = "rockchip,rk3288-pmu", "syscon";
+		reg = <0xff730000 0x100>;
+	};
+
+	sgrf: syscon@ff740000 {
+		compatible = "rockchip,rk3288-sgrf", "syscon";
+		reg = <0xff740000 0x1000>;
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3288-cru";
+		reg = <0xff760000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+				  <&cru PLL_NPLL>, <&cru ACLK_CPU>,
+				  <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+				  <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+				  <&cru PCLK_PERI>;
+		assigned-clock-rates = <594000000>, <400000000>,
+				       <500000000>, <300000000>,
+				       <150000000>, <75000000>,
+				       <300000000>, <150000000>,
+				       <75000000>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3288-grf", "syscon";
+		reg = <0xff770000 0x1000>;
+	};
+
+	wdt: watchdog@ff800000 {
+		compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
+		reg = <0xff800000 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	spdif: sound@ff88b0000 {
+		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
+		reg = <0xff8b0000 0x10000>;
+		#sound-dai-cells = <0>;
+		clock-names = "hclk", "mclk";
+		clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+		dmas = <&dmac_bus_s 3>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	i2s: i2s@ff890000 {
+		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+		reg = <0xff890000 0x10000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <1>;
+		dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		status = "disabled";
+	};
+
+	vopb: vop@ff930000 {
+		compatible = "rockchip,rk3288-vop";
+		reg = <0xff930000 0x19c>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopb_mmu>;
+		power-domains = <&power RK3288_PD_VIO>;
+		status = "disabled";
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			vopb_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+			vopb_out_hdmi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&hdmi_in_vopb>;
+			};
+			vopb_out_lvds: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&lvds_in_vopb>;
+			};
+			vopb_out_mipi: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
+
+		};
+	};
+
+	vopb_mmu: iommu@ff930300 {
+		compatible = "rockchip,iommu";
+		reg = <0xff930300 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopb_mmu";
+		power-domains = <&power RK3288_PD_VIO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff940000 {
+		compatible = "rockchip,rk3288-vop";
+		reg = <0xff940000 0x19c>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopl_mmu>;
+		power-domains = <&power RK3288_PD_VIO>;
+		status = "disabled";
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			vopl_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+			vopl_out_hdmi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&hdmi_in_vopl>;
+			};
+			vopl_out_lvds: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&lvds_in_vopl>;
+			};
+			vopl_out_mipi: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
+
+		};
+	};
+
+	vopl_mmu: iommu@ff940300 {
+		compatible = "rockchip,iommu";
+		reg = <0xff940300 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopl_mmu";
+		power-domains = <&power RK3288_PD_VIO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	edp: edp@ff970000 {
+		compatible = "rockchip,rk3288-edp";
+		reg = <0xff970000 0x4000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru PCLK_EDP_CTRL>;
+		rockchip,grf = <&grf>;
+		clock-names = "clk_edp", "clk_edp_24m", "pclk_edp";
+		resets = <&cru 111>;
+		reset-names = "edp";
+		power-domains = <&power RK3288_PD_VIO>;
+		status = "disabled";
+		ports {
+			edp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+		};
+	};
+
+	hdmi: hdmi@ff980000 {
+		compatible = "rockchip,rk3288-dw-hdmi";
+		reg = <0xff980000 0x20000>;
+		reg-io-width = <4>;
+		ddc-i2c-bus = <&i2c5>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+		clock-names = "iahb", "isfr";
+		status = "disabled";
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				hdmi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_hdmi>;
+				};
+				hdmi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	lvds: lvds@ff96c000 {
+		compatible = "rockchip,rk3288-lvds";
+		reg = <0xff96c000 0x4000>;
+		clocks = <&cru PCLK_LVDS_PHY>;
+		clock-names = "pclk_lvds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdc0_ctl>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			lvds_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				lvds_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+				lvds_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+		};
+	};
+
+	mipi_dsi0: mipi@ff960000 {
+		compatible = "rockchip,rk3288_mipi_dsi";
+		reg = <0xff960000 0x4000>;
+		clocks = <&cru PCLK_MIPI_DSI0>;
+		clock-names = "pclk_mipi";
+		/*pinctrl-names = "default";
+		pinctrl-0 = <&lcdc0_ctl>;*/
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		ports {
+			reg = <1>;
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
+	hdmi_audio: hdmi_audio {
+		compatible = "rockchip,rk3288-hdmi-audio";
+		i2s-controller = <&i2s>;
+		status = "disable";
+	};
+
+	vpu: video-codec@ff9a0000 {
+		compatible = "rockchip,rk3288-vpu";
+		reg = <0xff9a0000 0x800>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk_vcodec", "hclk_vcodec";
+		power-domains = <&power RK3288_PD_VIDEO>;
+		iommus = <&vpu_mmu>;
+	};
+
+	vpu_mmu: iommu@ff9a0800 {
+		compatible = "rockchip,iommu";
+		reg = <0xff9a0800 0x100>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vpu_mmu";
+		power-domains = <&power RK3288_PD_VIDEO>;
+		#iommu-cells = <0>;
+	};
+
+	gpu: gpu@ffa30000 {
+		compatible = "arm,malit764",
+			     "arm,malit76x",
+			     "arm,malit7xx",
+			     "arm,mali-midgard";
+		reg = <0xffa30000 0x10000>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "JOB", "MMU", "GPU";
+		clocks = <&cru ACLK_GPU>;
+		clock-names = "aclk_gpu";
+		operating-points = <
+			/* KHz uV */
+			100000 950000
+			200000 950000
+			300000 1000000
+			400000 1100000
+			/* 500000 1200000 - See crosbug.com/p/33857 */
+			600000 1250000
+		>;
+		power-domains = <&power RK3288_PD_GPU>;
+		status = "disabled";
+	};
+
+	noc: syscon@ffac0000 {
+		compatible = "rockchip,rk3288-noc", "syscon";
+		reg = <0xffac0000 0x2000>;
+	};
+
+	efuse: efuse@ffb40000 {
+		compatible = "rockchip,rk3288-efuse";
+		reg = <0xffb40000 0x10000>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@ffc01000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0xffc01000 0x1000>,
+		      <0xffc02000 0x1000>,
+		      <0xffc04000 0x2000>,
+		      <0xffc06000 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	cpuidle: cpuidle {
+		compatible = "rockchip,rk3288-cpuidle";
+	};
+
+	usbphy: phy {
+		compatible = "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy0 {
+			#phy-cells = <0>;
+			reg = <0x320>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+		};
+
+		usbphy1: usb-phy1 {
+			#phy-cells = <0>;
+			reg = <0x334>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+		};
+
+		usbphy2: usb-phy2 {
+			#phy-cells = <0>;
+			reg = <0x348>;
+			clocks = <&cru SCLK_OTGPHY2>;
+			clock-names = "phyclk";
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3288-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@ff750000 {
+			compatible = "rockchip,gpio-bank";
+			reg =	<0xff750000 0x100>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff780000 0x100>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff790000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@ff7a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7a0000 0x100>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio4@ff7b0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7b0000 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio5@ff7c0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7c0000 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO5>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio6@ff7d0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7d0000 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio7@ff7e0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7e0000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO7>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio8@ff7f0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7f0000 0x100>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO8>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		hdmi {
+			hdmi_cec_c0: hdmi-cec-c0 {
+				rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		sleep {
+			global_pwroff: global-pwroff {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			ddrio_pwroff: ddrio-pwroff {
+				rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			ddr0_retention: ddr0-retention {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			ddr1_retention: ddr1-retention {
+				rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
+						<0 16 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
+						<8 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
+						<6 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
+						<2 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
+						<7 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
+						<7 20 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>,
+						<6 1 RK_FUNC_1 &pcfg_pull_none>,
+						<6 2 RK_FUNC_1 &pcfg_pull_none>,
+						<6 3 RK_FUNC_1 &pcfg_pull_none>,
+						<6 4 RK_FUNC_1 &pcfg_pull_none>,
+						<6 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		lcdc0 {
+			lcdc0_ctl: lcdc0-ctl {
+				rockchip,pins = <1 24 RK_FUNC_1 &pcfg_pull_none>,
+						<1 25 RK_FUNC_1 &pcfg_pull_none>,
+						<1 26 RK_FUNC_1 &pcfg_pull_none>,
+						<1 27 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmcc-cd {
+				rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>,
+						<6 17 RK_FUNC_1 &pcfg_pull_up>,
+						<6 18 RK_FUNC_1 &pcfg_pull_up>,
+						<6 19 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>,
+						<4 21 RK_FUNC_1 &pcfg_pull_up>,
+						<4 22 RK_FUNC_1 &pcfg_pull_up>,
+						<4 23 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		sdio1 {
+			sdio1_bus1: sdio1-bus1 {
+				rockchip,pins = <3 24 RK_FUNC_4 &pcfg_pull_up>;
+			};
+
+			sdio1_bus4: sdio1-bus4 {
+				rockchip,pins = <3 24 RK_FUNC_4 &pcfg_pull_up>,
+						<3 25 RK_FUNC_4 &pcfg_pull_up>,
+						<3 26 RK_FUNC_4 &pcfg_pull_up>,
+						<3 27 RK_FUNC_4 &pcfg_pull_up>;
+			};
+
+			sdio1_cd: sdio1-cd {
+				rockchip,pins = <3 28 RK_FUNC_4 &pcfg_pull_up>;
+			};
+
+			sdio1_wp: sdio1-wp {
+				rockchip,pins = <3 29 RK_FUNC_4 &pcfg_pull_up>;
+			};
+
+			sdio1_bkpwr: sdio1-bkpwr {
+				rockchip,pins = <3 30 RK_FUNC_4 &pcfg_pull_up>;
+			};
+
+			sdio1_int: sdio1-int {
+				rockchip,pins = <3 31 RK_FUNC_4 &pcfg_pull_up>;
+			};
+
+			sdio1_cmd: sdio1-cmd {
+				rockchip,pins = <4 6 RK_FUNC_4 &pcfg_pull_up>;
+			};
+
+			sdio1_clk: sdio1-clk {
+				rockchip,pins = <4 7 RK_FUNC_4 &pcfg_pull_none>;
+			};
+
+			sdio1_pwr: sdio1-pwr {
+				rockchip,pins = <4 9 RK_FUNC_4 &pcfg_pull_up>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+						<3 1 RK_FUNC_2 &pcfg_pull_up>,
+						<3 2 RK_FUNC_2 &pcfg_pull_up>,
+						<3 3 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+						<3 1 RK_FUNC_2 &pcfg_pull_up>,
+						<3 2 RK_FUNC_2 &pcfg_pull_up>,
+						<3 3 RK_FUNC_2 &pcfg_pull_up>,
+						<3 4 RK_FUNC_2 &pcfg_pull_up>,
+						<3 5 RK_FUNC_2 &pcfg_pull_up>,
+						<3 6 RK_FUNC_2 &pcfg_pull_up>,
+						<3 7 RK_FUNC_2 &pcfg_pull_up>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_cs1: spi2-cs1 {
+				rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi2_clk: spi2-clk {
+				rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
+						<4 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>,
+						<5 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>,
+						<7 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>,
+						<7 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins = <5 12 3 &pcfg_pull_up>,
+						<5 13 3 &pcfg_pull_none>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins = <5 14 3 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins = <5 15 3 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_out: otp-out {
+				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <7 22 RK_FUNC_3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <7 23 RK_FUNC_3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <3 30 3 &pcfg_pull_none>,
+						<3 31 3 &pcfg_pull_none>,
+						<3 26 3 &pcfg_pull_none>,
+						<3 27 3 &pcfg_pull_none>,
+						<3 28 3 &pcfg_pull_none_12ma>,
+						<3 29 3 &pcfg_pull_none_12ma>,
+						<3 24 3 &pcfg_pull_none_12ma>,
+						<3 25 3 &pcfg_pull_none_12ma>,
+						<4 0 3 &pcfg_pull_none>,
+						<4 5 3 &pcfg_pull_none>,
+						<4 6 3 &pcfg_pull_none>,
+						<4 9 3 &pcfg_pull_none_12ma>,
+						<4 4 3 &pcfg_pull_none_12ma>,
+						<4 1 3 &pcfg_pull_none>,
+						<4 3 3 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <3 30 3 &pcfg_pull_none>,
+						<3 31 3 &pcfg_pull_none>,
+						<3 28 3 &pcfg_pull_none>,
+						<3 29 3 &pcfg_pull_none>,
+						<4 0 3 &pcfg_pull_none>,
+						<4 5 3 &pcfg_pull_none>,
+						<4 4 3 &pcfg_pull_none>,
+						<4 1 3 &pcfg_pull_none>,
+						<4 2 3 &pcfg_pull_none>,
+						<4 3 3 &pcfg_pull_none>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+
+	power: power-controller {
+		compatible = "rockchip,rk3288-power-controller";
+		#power-domain-cells = <1>;
+		rockchip,pmu = <&pmu>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pd_gpu {
+			reg = <RK3288_PD_GPU>;
+			clocks = <&cru ACLK_GPU>;
+		};
+
+		pd_hevc {
+			reg = <RK3288_PD_HEVC>;
+			clocks = <&cru ACLK_HEVC>,
+				 <&cru SCLK_HEVC_CABAC>,
+				 <&cru SCLK_HEVC_CORE>,
+				 <&cru HCLK_HEVC>;
+		};
+
+		pd_vio {
+			reg = <RK3288_PD_VIO>;
+			clocks = <&cru ACLK_IEP>,
+				 <&cru ACLK_ISP>,
+				 <&cru ACLK_RGA>,
+				 <&cru ACLK_VIP>,
+				 <&cru ACLK_VOP0>,
+				 <&cru ACLK_VOP1>,
+				 <&cru DCLK_VOP0>,
+				 <&cru DCLK_VOP1>,
+				 <&cru HCLK_IEP>,
+				 <&cru HCLK_ISP>,
+				 <&cru HCLK_RGA>,
+				 <&cru HCLK_VIP>,
+				 <&cru HCLK_VOP0>,
+				 <&cru HCLK_VOP1>,
+				 <&cru PCLK_EDP_CTRL>,
+				 <&cru PCLK_HDMI_CTRL>,
+				 <&cru PCLK_LVDS_PHY>,
+				 <&cru PCLK_MIPI_CSI>,
+				 <&cru PCLK_MIPI_DSI0>,
+				 <&cru PCLK_MIPI_DSI1>,
+				 <&cru SCLK_EDP_24M>,
+				 <&cru SCLK_EDP>,
+				 <&cru SCLK_HDMI_CEC>,
+				 <&cru SCLK_HDMI_HDCP>,
+				 <&cru SCLK_ISP_JPE>,
+				 <&cru SCLK_ISP>,
+				 <&cru SCLK_RGA>;
+		};
+
+		pd_video {
+			reg = <RK3288_PD_VIDEO>;
+			clocks = <&cru ACLK_VCODEC>,
+				 <&cru HCLK_VCODEC>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3308-evb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3308-evb-u-boot.dtsi
new file mode 100644
index 000000000..c6ea746de
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3308-evb-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
+ */
+#include "rk3308-u-boot.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &emmc;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+	clock-frequency = <24000000>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3308-evb.dts b/roms/u-boot/arch/arm/dts/rk3308-evb.dts
new file mode 100644
index 000000000..124a24086
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3308-evb.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3308.dtsi"
+
+/ {
+	model = "Rockchip RK3308 EVB";
+	compatible = "rockchip,rk3308-evb", "rockchip,rk3308";
+
+	chosen {
+		stdout-path = "serial4:1500000n8";
+	};
+
+	adc-keys0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		func-key {
+			linux,code = <KEY_FN>;
+			label = "function";
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	adc-keys1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		esc-key {
+			linux,code = <KEY_MICMUTE>;
+			label = "micmute";
+			press-threshold-microvolt = <1130000>;
+		};
+
+		home-key {
+			linux,code = <KEY_MODE>;
+			label = "mode";
+			press-threshold-microvolt = <901000>;
+		};
+
+		menu-key {
+			linux,code = <KEY_PLAY>;
+			label = "play";
+			press-threshold-microvolt = <624000>;
+		};
+
+		vol-down-key {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			press-threshold-microvolt = <300000>;
+		};
+
+		vol-up-key {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power {
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vdd_core: vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_1v0: vdd-1v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccio_sdio: vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_ddr: vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccio_flash: vccio-flash {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_flash";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc5v0_host: vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_drv>;
+		regulator-name = "vbus_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	buttons {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_drv: usb-drv {
+			rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3308-roc-cc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3308-roc-cc-u-boot.dtsi
new file mode 100644
index 000000000..ffbe74205
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3308-roc-cc-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
+ */
+#include "rk3308-u-boot.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &emmc;
+	};
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+	clock-frequency = <24000000>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3308-roc-cc.dts b/roms/u-boot/arch/arm/dts/rk3308-roc-cc.dts
new file mode 100644
index 000000000..b4a54a852
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3308-roc-cc.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3308.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3308-CC board";
+	compatible = "firefly,roc-rk3308-cc", "rockchip,rk3308";
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	ir_rx {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_recv_pin>;
+	};
+
+	ir_tx {
+		compatible = "pwm-ir-tx";
+		pwms = <&pwm5 0 25000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "firefly:red:power";
+			linux,default-trigger = "ir-power-click";
+			default-state = "on";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		user {
+			label = "firefly:blue:user";
+			linux,default-trigger = "ir-user-click";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	typec_vcc5v: typec-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "typec_vcc5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&typec_vcc5v>;
+	};
+
+	vdd_core: vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-init-microvolt = <1015000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_sdmmc: vcc-sdmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sdmmc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0
+			  3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_sd: vcc-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vim-supply = <&vcc_io>;
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	supports-emmc;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&mac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&mac_clkin>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmiim1_pins &macm1_refclk>;
+	status = "okay";
+};
+
+&pwm5 {
+	status = "okay";
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm5_pin_pull_down>;
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	ir-receiver {
+		ir_recv_pin: ir-recv-pin  {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	supports-sd;
+	card-detect-delay = <300>;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sdmmc>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3308-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3308-u-boot.dtsi
new file mode 100644
index 000000000..4bfad31fb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3308-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *(C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	/* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
+	u-boot,spl-fifo-mode;
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&saradc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3308.dtsi b/roms/u-boot/arch/arm/dts/rk3308.dtsi
new file mode 100644
index 000000000..a5c0b72ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3308.dtsi
@@ -0,0 +1,1851 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ */
+
+#include <dt-bindings/clock/rk3308-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3308";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	cpu0_opp_table: cpu0-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000 950000 1340000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000 950000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1025000 1025000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1125000 1125000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	mac_clkin: external-mac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "mac_clkin";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	grf: grf@ff000000 {
+		compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff000000 0x0 0x10000>;
+	};
+
+	dmc: dmc@0xff010000 {
+		compatible = "rockchip,rk3308-dmc";
+		reg = <0x0 0xff010000 0x0 0x10000>;
+	};
+
+	detect_grf: syscon@ff00b000 {
+		compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff00b000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	core_grf: syscon@ff00c000 {
+		compatible = "rockchip,rk3308-core-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff00c000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+	};
+
+	i2c0: i2c@ff040000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff040000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff050000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff050000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff060000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff060000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff070000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff070000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3m0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff080000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x0 0xff080000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff0a0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0a0000 0x0 0x100>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff0b0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0b0000 0x0 0x100>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff0c0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0c0000 0x0 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff0d0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0d0000 0x0 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff0e0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0e0000 0x0 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff120000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 0>, <&dmac0 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default", "high_speed";
+		pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>;
+		pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff130000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 2>, <&dmac0 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default", "high_speed";
+		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>;
+		pinctrl-1 = <&spi1_clk_hs &spi1_csn0 &spi1_miso_hs &spi1_mosi_hs>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff140000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac1 16>, <&dmac1 17>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default", "high_speed";
+		pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>;
+		pinctrl-1 = <&spi2_clk_hs &spi2_csn0 &spi2_miso_hs &spi2_mosi_hs>;
+		status = "disabled";
+	};
+
+	pwm8: pwm@ff160000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm8_pin>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm9: pwm@ff160010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm9_pin>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm10: pwm@ff160020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160020 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm10_pin>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm11: pwm@ff160030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm11_pin>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm4: pwm@ff170000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4_pin>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm5: pwm@ff170010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5_pin>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm6: pwm@ff170020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170020 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6_pin>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm7: pwm@ff170030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7_pin>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff180000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff180010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff180020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180020 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff180030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		status = "disabled";
+	};
+
+	rktimer: rktimer@ff1a0000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0x0 0xff1a0000 0x0 0x20>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	saradc: saradc@ff1e0000 {
+		compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff1e0000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dmac0: dma-controller@ff2c0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff2c0000 0x0 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC0>;
+			clock-names = "apb_pclk";
+			peripherals-req-type-burst;
+		};
+
+		dmac1: dma-controller@ff2d0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff2d0000 0x0 0x4000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC1>;
+			clock-names = "apb_pclk";
+			peripherals-req-type-burst;
+		};
+	};
+
+	i2s_2ch_0: i2s@ff350000 {
+		compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff350000 0x0 0x1000>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1 8>, <&dmac1 9>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>;
+		reset-names = "reset-m", "reset-h";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_2ch_0_sclk
+			     &i2s_2ch_0_lrck
+			     &i2s_2ch_0_sdi
+			     &i2s_2ch_0_sdo>;
+		status = "disabled";
+	};
+
+	i2s_2ch_1: i2s@ff360000 {
+		compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff360000 0x0 0x1000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1 11>;
+		dma-names = "rx";
+		resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>;
+		reset-names = "reset-m", "reset-h";
+		status = "disabled";
+	};
+
+	spdif_tx: spdif-tx@ff3a0000 {
+		compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif";
+		reg = <0x0 0xff3a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac1 13>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_out>;
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@ff480000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff480000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		bus-width = <4>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@ff490000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff490000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		bus-width = <8>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@ff4a0000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff4a0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		bus-width = <4>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+		status = "disabled";
+	};
+
+	mac: ethernet@ff4e0000 {
+		compatible = "rockchip,rk3308-mac";
+		reg = <0x0 0xff4e0000 0x0 0x10000>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>,
+			 <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>,
+			 <&cru SCLK_MAC>, <&cru ACLK_MAC>,
+			 <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac", "clk_mac_speed";
+		phy-mode = "rmii";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+		resets = <&cru SRST_MAC_A>;
+		reset-names = "stmmaceth";
+		status = "disabled";
+	};
+
+	cru: clock-controller@ff500000 {
+		compatible = "rockchip,rk3308-cru";
+		reg = <0x0 0xff500000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	gic: interrupt-controller@ff580000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+
+		reg = <0x0 0xff581000 0x0 0x1000>,
+		      <0x0 0xff582000 0x0 0x2000>,
+		      <0x0 0xff584000 0x0 0x2000>,
+		      <0x0 0xff586000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sram: sram@fff80000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xfff80000 0x0 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0xfff80000 0x40000>;
+		/* reserved for ddr dvfs and system suspend/resume */
+		ddr-sram@0 {
+			reg = <0x0 0x8000>;
+		};
+		/* reserved for vad audio buffer */
+		vad_sram: vad-sram@8000 {
+			reg = <0x8000 0x38000>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3308-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		gpio0: gpio0@ff220000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff220000 0x0 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@ff230000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff230000 0x0 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@ff240000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff240000 0x0 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@ff250000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff250000 0x0 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio4@ff260000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff260000 0x0 0x100>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_smt: pcfg-pull-none-smt {
+			bias-disable;
+			input-schmitt-enable;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<1 RK_PD0 2 &pcfg_pull_none_smt>,
+					<1 RK_PD1 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<0 RK_PB3 1 &pcfg_pull_none_smt>,
+					<0 RK_PB4 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PA2 3 &pcfg_pull_none_smt>,
+					<2 RK_PA3 3 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m0 {
+			i2c3m0_xfer: i2c3m0-xfer {
+				rockchip,pins =
+					<0 RK_PB7 2 &pcfg_pull_none_smt>,
+					<0 RK_PC0 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m1 {
+			i2c3m1_xfer: i2c3m1-xfer {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_none_smt>,
+					<3 RK_PB5 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m2 {
+			i2c3m2_xfer: i2c3m2-xfer {
+				rockchip,pins =
+					<2 RK_PA1 3 &pcfg_pull_none_smt>,
+					<2 RK_PA0 3 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2s_2ch_0 {
+			i2s_2ch_0_mclk: i2s-2ch-0-mclk {
+				rockchip,pins =
+					<4 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sclk: i2s-2ch-0-sclk {
+				rockchip,pins =
+					<4 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_lrck: i2s-2ch-0-lrck {
+				rockchip,pins =
+					<4 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sdo: i2s-2ch-0-sdo {
+				rockchip,pins =
+					<4 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sdi: i2s-2ch-0-sdi {
+				rockchip,pins =
+					<4 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_0 {
+			i2s_8ch_0_mclk: i2s-8ch-0-mclk {
+				rockchip,pins =
+					<2 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sclktx: i2s-8ch-0-sclktx {
+				rockchip,pins =
+					<2 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx {
+				rockchip,pins =
+					<2 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx {
+				rockchip,pins =
+					<2 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx {
+				rockchip,pins =
+					<2 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 {
+				rockchip,pins =
+					<2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 {
+				rockchip,pins =
+					<2 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 {
+				rockchip,pins =
+					<2 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 {
+				rockchip,pins =
+					<2 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 {
+				rockchip,pins =
+					<2 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 {
+				rockchip,pins =
+					<2 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_1_m0 {
+			i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk {
+				rockchip,pins =
+					<1 RK_PA2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx {
+				rockchip,pins =
+					<1 RK_PA3 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx {
+				rockchip,pins =
+					<1 RK_PA4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx {
+				rockchip,pins =
+					<1 RK_PA5 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx {
+				rockchip,pins =
+					<1 RK_PA6 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 {
+				rockchip,pins =
+					<1 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 {
+				rockchip,pins =
+					<1 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 {
+				rockchip,pins =
+					<1 RK_PB3 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_1_m1 {
+			i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk {
+				rockchip,pins =
+					<1 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx {
+				rockchip,pins =
+					<1 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx {
+				rockchip,pins =
+					<1 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx {
+				rockchip,pins =
+					<1 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx {
+				rockchip,pins =
+					<1 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 {
+				rockchip,pins =
+					<1 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 {
+				rockchip,pins =
+					<1 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 {
+				rockchip,pins =
+					<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 {
+				rockchip,pins =
+					<1 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 {
+				rockchip,pins =
+					<1 RK_PC5 2 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m0 {
+			pdm_m0_clk: pdm-m0-clk {
+				rockchip,pins =
+					<1 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi0: pdm-m0-sdi0 {
+				rockchip,pins =
+					<1 RK_PB3 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi1: pdm-m0-sdi1 {
+				rockchip,pins =
+					<1 RK_PB2 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi2: pdm-m0-sdi2 {
+				rockchip,pins =
+					<1 RK_PB1 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi3: pdm-m0-sdi3 {
+				rockchip,pins =
+					<1 RK_PB0 3 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m1 {
+			pdm_m1_clk: pdm-m1-clk {
+				rockchip,pins =
+					<1 RK_PB6 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi0: pdm-m1-sdi0 {
+				rockchip,pins =
+					<1 RK_PC5 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi1: pdm-m1-sdi1 {
+				rockchip,pins =
+					<1 RK_PC4 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi2: pdm-m1-sdi2 {
+				rockchip,pins =
+					<1 RK_PC3 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi3: pdm-m1-sdi3 {
+				rockchip,pins =
+					<1 RK_PC2 4 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m2 {
+			pdm_m2_clkm: pdm-m2-clkm {
+				rockchip,pins =
+					<2 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			pdm_m2_clk: pdm-m2-clk {
+				rockchip,pins =
+					<2 RK_PA6 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi0: pdm-m2-sdi0 {
+				rockchip,pins =
+					<2 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi1: pdm-m2-sdi1 {
+				rockchip,pins =
+					<2 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi2: pdm-m2-sdi2 {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi3: pdm-m2-sdi3 {
+				rockchip,pins =
+					<2 RK_PC0 2 &pcfg_pull_none>;
+			};
+		};
+
+		spdif_in {
+			spdif_in: spdif-in {
+				rockchip,pins =
+					<0 RK_PC2 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif_out {
+			spdif_out: spdif-out {
+				rockchip,pins =
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			tsadc_otp_gpio: tsadc-otp-gpio {
+				rockchip,pins =
+					<0 RK_PB2 0 &pcfg_pull_none>;
+			};
+
+			tsadc_otp_out: tsadc-otp-out {
+				rockchip,pins =
+					<0 RK_PB2 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<2 RK_PA1 1 &pcfg_pull_up>,
+					<2 RK_PA0 1 &pcfg_pull_up>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<2 RK_PA2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<2 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_gpio: uart0-rts-gpio {
+				rockchip,pins =
+					<2 RK_PA3 0 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<1 RK_PD1 1 &pcfg_pull_up>,
+					<1 RK_PD0 1 &pcfg_pull_up>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins =
+					<1 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins =
+					<1 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2-m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins =
+					<1 RK_PC7 2 &pcfg_pull_up>,
+					<1 RK_PC6 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart2-m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins =
+					<4 RK_PD3 2 &pcfg_pull_up>,
+					<4 RK_PD2 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins =
+					<3 RK_PB5 4 &pcfg_pull_up>,
+					<3 RK_PB4 4 &pcfg_pull_up>;
+			};
+		};
+
+		uart3-m1 {
+			uart3m1_xfer: uart3m1-xfer {
+				rockchip,pins =
+					<0 RK_PC2 3 &pcfg_pull_up>,
+					<0 RK_PC1 3 &pcfg_pull_up>;
+			};
+		};
+
+		uart4 {
+
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<4 RK_PB1 1 &pcfg_pull_up>,
+					<4 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins =
+					<4 RK_PA6 1 &pcfg_pull_none>;
+
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins =
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			uart4_rts_gpio: uart4-rts-gpio {
+				rockchip,pins =
+					<4 RK_PA7 0 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<2 RK_PA2 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_csn0: spi0-csn0 {
+				rockchip,pins =
+					<2 RK_PA3 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_miso: spi0-miso {
+				rockchip,pins =
+					<2 RK_PA0 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_mosi: spi0-mosi {
+				rockchip,pins =
+					<2 RK_PA1 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_clk_hs: spi0-clk-hs {
+				rockchip,pins =
+					<2 RK_PA2 2 &pcfg_pull_up_8ma>;
+			};
+
+			spi0_miso_hs: spi0-miso-hs {
+				rockchip,pins =
+					<2 RK_PA0 2 &pcfg_pull_up_8ma>;
+			};
+
+			spi0_mosi_hs: spi0-mosi-hs {
+				rockchip,pins =
+					<2 RK_PA1 2 &pcfg_pull_up_8ma>;
+			};
+
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<3 RK_PB3 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn0: spi1-csn0 {
+				rockchip,pins =
+					<3 RK_PB5 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_miso: spi1-miso {
+				rockchip,pins =
+					<3 RK_PB2 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_mosi: spi1-mosi {
+				rockchip,pins =
+					<3 RK_PB4 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_clk_hs: spi1-clk-hs {
+				rockchip,pins =
+					<3 RK_PB3 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi1_miso_hs: spi1-miso-hs {
+				rockchip,pins =
+					<3 RK_PB2 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi1_mosi_hs: spi1-mosi-hs {
+				rockchip,pins =
+					<3 RK_PB4 3 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		spi1-m1 {
+			spi1m1_miso: spi1m1-miso {
+				rockchip,pins =
+					<2 RK_PA4 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_mosi: spi1m1-mosi {
+				rockchip,pins =
+					<2 RK_PA5 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_clk: spi1m1-clk {
+				rockchip,pins =
+					<2 RK_PA7 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_csn0: spi1m1-csn0 {
+				rockchip,pins =
+					<2 RK_PB1 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_miso_hs: spi1m1-miso-hs {
+				rockchip,pins =
+					<2 RK_PA4 2 &pcfg_pull_up_8ma>;
+			};
+
+			spi1m1_mosi_hs: spi1m1-mosi-hs {
+				rockchip,pins =
+					<2 RK_PA5 2 &pcfg_pull_up_8ma>;
+			};
+
+			spi1m1_clk_hs: spi1m1-clk-hs {
+				rockchip,pins =
+					<2 RK_PA7 2 &pcfg_pull_up_8ma>;
+			};
+
+			spi1m1_csn0_hs: spi1m1-csn0-hs {
+				rockchip,pins =
+					<2 RK_PB1 2 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins =
+					<1 RK_PD0 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_csn0: spi2-csn0 {
+				rockchip,pins =
+					<1 RK_PD1 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_miso: spi2-miso {
+				rockchip,pins =
+					<1 RK_PC6 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_mosi: spi2-mosi {
+				rockchip,pins =
+					<1 RK_PC7 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_clk_hs: spi2-clk-hs {
+				rockchip,pins =
+					<1 RK_PD0 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi2_miso_hs: spi2-miso-hs {
+				rockchip,pins =
+					<1 RK_PC6 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi2_mosi_hs: spi2-mosi-hs {
+				rockchip,pins =
+					<1 RK_PC7 3 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<4 RK_PD5 1 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<4 RK_PD4 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_det: sdmmc-det {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_pwren: sdmmc-pwren {
+				rockchip,pins =
+					<4 RK_PD6 1 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<4 RK_PD0 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<4 RK_PD0 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD1 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD2 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD3 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_gpio: sdmmc-gpio {
+				rockchip,pins =
+					<4 RK_PD0 0 &pcfg_pull_up_4ma>,
+					<4 RK_PD1 0 &pcfg_pull_up_4ma>,
+					<4 RK_PD2 0 &pcfg_pull_up_4ma>,
+					<4 RK_PD3 0 &pcfg_pull_up_4ma>,
+					<4 RK_PD4 0 &pcfg_pull_up_4ma>,
+					<4 RK_PD5 0 &pcfg_pull_up_4ma>,
+					<4 RK_PD6 0 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins =
+					<4 RK_PA5 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins =
+					<4 RK_PA4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdio_pwren: sdio-pwren {
+				rockchip,pins =
+					<0 RK_PA2 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_wrpt: sdio-wrpt {
+				rockchip,pins =
+					<0 RK_PA1 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_intn: sdio-intn {
+				rockchip,pins =
+					<0 RK_PA0 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_bus1: sdio-bus1 {
+				rockchip,pins =
+					<4 RK_PA0 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins =
+					<4 RK_PA0 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA1 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA2 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdio_gpio: sdio-gpio {
+				rockchip,pins =
+					<4 RK_PA0 0 &pcfg_pull_up_4ma>,
+					<4 RK_PA1 0 &pcfg_pull_up_4ma>,
+					<4 RK_PA2 0 &pcfg_pull_up_4ma>,
+					<4 RK_PA3 0 &pcfg_pull_up_4ma>,
+					<4 RK_PA4 0 &pcfg_pull_up_4ma>,
+					<4 RK_PA5 0 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins =
+					<3 RK_PB1 2 &pcfg_pull_none_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			emmc_rstn: emmc-rstn {
+				rockchip,pins =
+					<3 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA4 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA5 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA6 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA7 2 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		flash {
+			flash_csn0: flash-csn0 {
+				rockchip,pins =
+					<3 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy: flash-rdy {
+				rockchip,pins =
+					<3 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			flash_ale: flash-ale {
+				rockchip,pins =
+					<3 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			flash_cle: flash-cle {
+				rockchip,pins =
+					<3 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn: flash-wrn {
+				rockchip,pins =
+					<3 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn: flash-rdn {
+				rockchip,pins =
+					<3 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins =
+					<3 RK_PA0 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA1 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA2 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA3 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA4 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA5 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA6 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA7 1 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			pwm0_pin_pull_down: pwm0-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<0 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			pwm1_pin_pull_down: pwm1-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB6 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			pwm2_pin_pull_down: pwm2-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			pwm3_pin_pull_down: pwm3-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm4 {
+			pwm4_pin: pwm4-pin {
+				rockchip,pins =
+					<0 RK_PA1 2 &pcfg_pull_none>;
+			};
+
+			pwm4_pin_pull_down: pwm4-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PA1 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm5 {
+			pwm5_pin: pwm5-pin {
+				rockchip,pins =
+					<0 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			pwm5_pin_pull_down: pwm5-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC1 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm6 {
+			pwm6_pin: pwm6-pin {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			pwm6_pin_pull_down: pwm6-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm7 {
+			pwm7_pin: pwm7-pin {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			pwm7_pin_pull_down: pwm7-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm8 {
+			pwm8_pin: pwm8-pin {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			pwm8_pin_pull_down: pwm8-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm9 {
+			pwm9_pin: pwm9-pin {
+				rockchip,pins =
+					<2 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			pwm9_pin_pull_down: pwm9-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB3 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm10 {
+			pwm10_pin: pwm10-pin {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			pwm10_pin_pull_down: pwm10-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm11 {
+			pwm11_pin: pwm11-pin {
+				rockchip,pins =
+					<2 RK_PC0 4 &pcfg_pull_none>;
+			};
+
+			pwm11_pin_pull_down: pwm11-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PC0 4 &pcfg_pull_down>;
+			};
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_txen */
+					<1 RK_PC1 3 &pcfg_pull_none_12ma>,
+					/* mac_txd1 */
+					<1 RK_PC3 3 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<1 RK_PC2 3 &pcfg_pull_none_12ma>,
+					/* mac_rxd0 */
+					<1 RK_PC4 3 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<1 RK_PC5 3 &pcfg_pull_none>,
+					/* mac_rxer */
+					<1 RK_PB7 3 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<1 RK_PC0 3 &pcfg_pull_none>,
+					/* mac_mdio */
+					<1 RK_PB6 3 &pcfg_pull_none>,
+					/* mac_mdc */
+					<1 RK_PB5 3 &pcfg_pull_none>;
+			};
+
+			mac_refclk_12ma: mac-refclk-12ma {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_none_12ma>;
+			};
+
+			mac_refclk: mac-refclk {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac-m1 {
+			rmiim1_pins: rmiim1-pins {
+				rockchip,pins =
+					/* mac_txen */
+					<4 RK_PB7 2 &pcfg_pull_none_12ma>,
+					/* mac_txd1 */
+					<4 RK_PA5 2 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<4 RK_PA4 2 &pcfg_pull_none_12ma>,
+					/* mac_rxd0 */
+					<4 RK_PA2 2 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<4 RK_PA3 2 &pcfg_pull_none>,
+					/* mac_rxer */
+					<4 RK_PA0 2 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<4 RK_PA1 2 &pcfg_pull_none>,
+					/* mac_mdio */
+					<4 RK_PB6 2 &pcfg_pull_none>,
+					/* mac_mdc */
+					<4 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			macm1_refclk_12ma: macm1-refclk-12ma {
+				rockchip,pins =
+					<4 RK_PB4 2 &pcfg_pull_none_12ma>;
+			};
+
+			macm1_refclk: macm1-refclk {
+				rockchip,pins =
+					<4 RK_PB4 2 &pcfg_pull_none>;
+			};
+		};
+
+		rtc {
+			rtc_32k: rtc-32k {
+				rockchip,pins =
+					<0 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
new file mode 100644
index 000000000..00767d2ab
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = &sdmmc;
+	};
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio0 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&pmucru {
+	u-boot,dm-pre-reloc;
+};
+
+&pmugrf {
+	u-boot,dm-pre-reloc;
+};
+
+&saradc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+
+	/* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
+	u-boot,spl-fifo-mode;
+};
+
+&uart1 {
+	clock-frequency = <24000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	clock-frequency = <24000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&xin24m {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3326-odroid-go2.dts b/roms/u-boot/arch/arm/dts/rk3326-odroid-go2.dts
new file mode 100644
index 000000000..8cd4688c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3326-odroid-go2.dts
@@ -0,0 +1,716 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	model = "ODROID-GO Advance";
+	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-range = <172 772>;
+			abs-fuzz = <10>;
+			abs-flat = <10>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-range = <278 815>;
+			abs-fuzz = <10>;
+			abs-flat = <10>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		/*
+		 *      *** ODROIDGO2-Advance Switch layout ***
+		 * |------------------------------------------------|
+		 * | sw15                                      sw16 |
+		 * |------------------------------------------------|
+		 * |     sw1      |-------------------|      sw8    |
+		 * |  sw3   sw4   |                   |   sw7   sw5 |
+		 * |     sw2      |    LCD Display    |      sw6    |
+		 * |              |                   |             |
+		 * |              |-------------------|             |
+		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
+		 * |------------------------------------------------|
+		 */
+
+		sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,rk817-codec";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
+		simple-audio-card,codec-hp-det = <1>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817_codec>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vccsys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "elida,kd35t133";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default", "pmic-sleep",
+				"pmic-power-off", "pmic-reset";
+		pinctrl-0 = <&pmic_int>;
+		pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
+		pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
+		pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+
+		pinctrl_rk8xx: pinctrl_rk8xx {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			rk817_ts_gpio1: rk817_ts_gpio1 {
+				pins = "gpio_ts";
+				function = "pin_fun1";
+				/* output-low; */
+				/* input-enable; */
+			};
+
+			rk817_gt_gpio2: rk817_gt_gpio2 {
+				pins = "gpio_gt";
+				function = "pin_fun1";
+			};
+
+			rk817_pin_ts: rk817_pin_ts {
+				pins = "gpio_ts";
+				function = "pin_fun0";
+			};
+
+			rk817_pin_gt: rk817_pin_gt {
+				pins = "gpio_gt";
+				function = "pin_fun0";
+			};
+
+			rk817_slppin_null: rk817_slppin_null {
+				pins = "gpio_slp";
+				function = "pin_fun0";
+			};
+
+			rk817_slppin_slp: rk817_slppin_slp {
+				pins = "gpio_slp";
+				function = "pin_fun1";
+			};
+
+			rk817_slppin_pwrdn: rk817_slppin_pwrdn {
+				pins = "gpio_slp";
+				function = "pin_fun2";
+			};
+
+			rk817_slppin_rst: rk817_slppin_rst {
+				pins = "gpio_slp";
+				function = "pin_fun3";
+			};
+		};
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-name = "vcc_cam";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+
+		battery {
+			compatible = "rk817,battery";
+			ocv_table = <3500 3625 3685 3697 3718 3735 3748
+			3760 3774 3788 3802 3816 3834 3853
+			3877 3908 3946 3975 4018 4071 4106>;
+
+			/* KPL605475 Battery Spec */
+			/*
+				Capacity : 3.7V 3000mA
+				Normal Voltage = 3.7V
+				Cut-Off Voltage : 3.1V
+				Internal Impedance : 180 mOhm
+				Charging Voltage : 4.2V
+				Charging Voltage Max : 4.25V
+				Sample resister : 10 mohm
+			*/
+			design_capacity = <3000>;
+			design_qmax = <3000>;
+			bat_res = <180>;
+			sleep_enter_current = <300>;
+			sleep_exit_current = <300>;
+			sleep_filter_current = <100>;
+			power_off_thresd = <3500>;
+			zero_algorithm_vol = <3700>;
+			max_soc_offset = <60>;
+			monitor_sec = <5>;
+			virtual_power = <0>;
+			sample_res = <10>;
+		};
+
+		charger {
+			compatible = "rk817,charger";
+			min_input_voltage = <4500>;
+			max_input_current = <1500>;
+			max_chrg_current = <2000>;
+			max_chrg_voltage = <4200>;
+			chrg_term_mode = <0>;
+			chrg_finish_cur = <300>;
+			virtual_power = <0>;
+			sample_res = <10>;
+
+			/* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
+			dc_det_gpio  = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+			chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+
+			extcon = <&u2phy>;
+		};
+
+		rk817_codec: codec {
+			#sound-dai-cells = <0>;
+			compatible = "rockchip,rk817-codec";
+			clocks = <&cru SCLK_I2S1_OUT>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_2ch_mclk>;
+			hp-volume = <20>;
+			spk-volume = <3>;
+			status = "okay";
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3326.dtsi b/roms/u-boot/arch/arm/dts/rk3326.dtsi
new file mode 100644
index 000000000..2ba6da125
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3326.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "px30.dtsi"
+
+&display_subsystem {
+	ports = <&vopb_out>;
+};
+
+/delete-node/ &dsi_in_vopl;
+/delete-node/ &lvds_vopl_in;
+/delete-node/ &vopl;
+/delete-node/ &vopl_mmu;
diff --git a/roms/u-boot/arch/arm/dts/rk3328-evb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3328-evb-u-boot.dtsi
new file mode 100644
index 000000000..4bfa0c233
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-evb-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016-2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr3-666.dtsi"
+
+/{
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_host_xhci";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&gmac2io {
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gmac2phy {
+	/* Integrated PHY unsupported by U-boot */
+	status = "broken";
+};
+
+&usb_host0_xhci {
+	vbus-supply = <&vcc5v0_host_xhci>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-evb.dts b/roms/u-boot/arch/arm/dts/rk3328-evb.dts
new file mode 100644
index 000000000..6abc6f4a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-evb.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Rockchip RK3328 EVB";
+	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_gpio>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac2phy {
+	phy-supply = <&vcc_phy>;
+	clock_in_out = "output";
+	assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
+	assigned-clock-rate = <50000000>;
+	assigned-clocks = <&cru SCLK_MAC2PHY>;
+	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+		rockchip,pins =
+			<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
new file mode 100644
index 000000000..9e2ced154
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2020 David Bauer
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr4-666.dtsi"
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
+	};
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&pinctrl {
+	u-boot,dm-spl;
+};
+
+&sdmmc0m1_gpio {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+	u-boot,dm-spl;
+};
+
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
+&vcc_sd {
+	u-boot,dm-spl;
+};
+
+&gmac2io {
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-nanopi-r2s.dts b/roms/u-boot/arch/arm/dts/rk3328-nanopi-r2s.dts
new file mode 100644
index 000000000..5445c5cb3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-nanopi-r2s.dts
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R2S";
+	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clk: gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&reset_button_pin>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
+		pinctrl-names = "default";
+
+		lan_led: led-0 {
+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:green:lan";
+		};
+
+		sys_led: led-1 {
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:red:sys";
+		};
+
+		wan_led: led-2 {
+			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:green:wan";
+		};
+	};
+
+	vcc_io_sdio: sdmmcio-regulator {
+		compatible = "regulator-gpio";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sdio_vcc_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_io_sdio";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-settling-time-us = <5000>;
+		regulator-type = "voltage";
+		startup-delay-us = <2000>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		vin-supply = <&vcc_io_33>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_gpio>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io_33>;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io_33>;
+	pinctrl-0 = <&rgmiim1_pins>;
+	pinctrl-names = "default";
+	rx_delay = <0x18>;
+	snps,aal;
+	tx_delay = <0x24>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c915",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vdd_5v>;
+		vcc2-supply = <&vdd_5v>;
+		vcc3-supply = <&vdd_5v>;
+		vcc4-supply = <&vdd_5v>;
+		vcc5-supply = <&vcc_io_33>;
+		vcc6-supply = <&vdd_5v>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io_33: DCDC_REG4 {
+				regulator-name = "vcc_io_33";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	pmuio-supply = <&vcc_io_33>;
+	vccio1-supply = <&vcc_io_33>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io_sdio>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io_33>;
+	vccio6-supply = <&vcc_io_33>;
+	status = "okay";
+};
+
+&pinctrl {
+	button {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet-phy {
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sd {
+		sdio_vcc_pin: sdio-vcc-pin {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	pinctrl-names = "default";
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_io_sdio>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
new file mode 100644
index 000000000..08806dfc0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr4-666.dtsi"
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
+	};
+
+	smbios {
+		compatible = "u-boot,sysinfo-smbios";
+
+		smbios {
+			system {
+				manufacturer = "firefly";
+				product = "roc-rk3328-cc";
+			};
+
+			baseboard {
+				manufacturer = "firefly";
+				product = "roc-rk3328-cc";
+			};
+
+			chassis {
+				manufacturer = "firefly";
+				product = "roc-rk3328-cc";
+			};
+		};
+	};
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&pinctrl {
+	u-boot,dm-spl;
+};
+
+&sdmmc0m1_gpio {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+	u-boot,dm-spl;
+};
+
+&usb_host0_xhci {
+	vbus-supply = <&vcc_host1_5v>;
+	status = "okay";
+};
+
+/*
+ * This makes XHCI responsible for toggling VBUS. This is needed to work
+ * around an issue where either XHCI only works with USB 2.0 or OTG doesn't
+ * work, depending on how VBUS is configured. Having USB 3.0 seems better.
+ */
+&vcc_host1_5v {
+	/delete-property/ regulator-always-on;
+};
+
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
+&vcc_sd {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-roc-cc.dts b/roms/u-boot/arch/arm/dts/rk3328-roc-cc.dts
new file mode 100644
index 000000000..8d553c921
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-roc-cc.dts
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Firefly roc-rk3328-cc";
+	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_gpio>;
+		regulator-boot-on;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sdio: sdmmcio-regulator {
+		compatible = "regulator-gpio";
+		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		regulator-name = "vcc_sdio";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "firefly:blue:power";
+			linux,default-trigger = "heartbeat";
+			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			mode = <0x23>;
+		};
+
+		user {
+			label = "firefly:yellow:user";
+			linux,default-trigger = "mmc1";
+			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			mode = <0x05>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <150000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,aal;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,rxpbl = <0x4>;
+	snps,txpbl = <0x4>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_sdio>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
new file mode 100644
index 000000000..4fc055eac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Radxa
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr3-666.dtsi"
+
+/ {
+	smbios {
+		compatible = "u-boot,sysinfo-smbios";
+
+		smbios {
+			system {
+				manufacturer = "radxa";
+				product = "rock-pi-e_rk3328";
+			};
+
+			baseboard {
+				manufacturer = "radxa";
+				product = "rock-pi-e_rk3328";
+			};
+
+			chassis {
+				manufacturer = "radxa";
+				product = "rock-pi-e_rk3328";
+			};
+		};
+	};
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&pinctrl {
+	u-boot,dm-spl;
+};
+
+&sdmmc0m1_gpio {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+	u-boot,dm-spl;
+};
+
+&usb_host0_xhci {
+	vbus-supply = <&vcc5v0_host_xhci>;
+	status = "okay";
+};
+
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
+&vcc_sd {
+	u-boot,dm-spl;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-rock-pi-e.dts b/roms/u-boot/arch/arm/dts/rk3328-rock-pi-e.dts
new file mode 100644
index 000000000..4b9f9a824
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-rock-pi-e.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Radxa
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Radxa Rockpi E";
+	compatible = "radxa,rock-pi-e", "rockchip,rk3328";
+
+	chosen {
+	stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+	compatible = "fixed-clock";
+	clock-frequency = <125000000>;
+	clock-output-names = "gmac_clkin";
+	#clock-cells = <0>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+	compatible = "regulator-fixed";
+	gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0m1_gpio>;
+	regulator-name = "vcc_sd";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	vin-supply = <&vcc_io>;
+	};
+
+	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
+	compatible = "regulator-fixed";
+	enable-active-high;
+	regulator-name = "vcc5v0_host_xhci";
+	gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_sys: vcc-sys {
+	compatible = "regulator-fixed";
+	regulator-name = "vcc_sys";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	supports-emmc;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: rk805@18 {
+	compatible = "rockchip,rk805";
+	status = "okay";
+	reg = <0x18>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+	#clock-cells = <1>;
+	clock-output-names = "xin32k", "rk805-clkout2";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+	rockchip,system-power-controller;
+	wakeup-source;
+
+	vcc1-supply = <&vcc_sys>;
+	vcc2-supply = <&vcc_sys>;
+	vcc3-supply = <&vcc_sys>;
+	vcc4-supply = <&vcc_sys>;
+	vcc5-supply = <&vcc_io>;
+	vcc6-supply = <&vcc_sys>;
+
+	regulators {
+	vdd_logic: DCDC_REG1 {
+	regulator-name = "vdd_logic";
+	regulator-min-microvolt = <712500>;
+	regulator-max-microvolt = <1450000>;
+	regulator-ramp-delay = <12500>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1000000>;
+	};
+	};
+
+	vdd_arm: DCDC_REG2 {
+	regulator-name = "vdd_arm";
+	regulator-min-microvolt = <712500>;
+	regulator-max-microvolt = <1450000>;
+	regulator-ramp-delay = <12500>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <950000>;
+	};
+	};
+
+	vcc_ddr: DCDC_REG3 {
+	regulator-name = "vcc_ddr";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	};
+	};
+
+	vcc_io: DCDC_REG4 {
+	regulator-name = "vcc_io";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <3300000>;
+	};
+	};
+
+	vcc_18: LDO_REG1 {
+	regulator-name = "vcc_18";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1800000>;
+	};
+	};
+
+	vcc18_emmc: LDO_REG2 {
+	regulator-name = "vcc18_emmc";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1800000>;
+	};
+	};
+
+	vdd_10: LDO_REG3 {
+	regulator-name = "vdd_10";
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1000000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1000000>;
+	};
+	};
+	};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_io>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	pmic {
+	pmic_int_l: pmic-int-l {
+	rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+	};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	max-frequency = <150000000>;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	supports-sd;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3328-rock64-u-boot.dtsi
new file mode 100644
index 000000000..2af32aea0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-lpddr3-1600.dtsi"
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
+	};
+
+	smbios {
+		compatible = "u-boot,sysinfo-smbios";
+
+		smbios {
+			system {
+				manufacturer = "pine64";
+				product = "rock64_rk3328";
+			};
+
+			baseboard {
+				manufacturer = "pine64";
+				product = "rock64_rk3328";
+			};
+
+			chassis {
+				manufacturer = "pine64";
+				product = "rock64_rk3328";
+			};
+		};
+	};
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&pinctrl {
+	u-boot,dm-spl;
+};
+
+&sdmmc0m1_gpio {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+	u-boot,dm-spl;
+};
+
+&usb_host0_xhci {
+	vbus-supply = <&vcc_host_5v>;
+	status = "okay";
+};
+
+/*
+ * This makes XHCI responsible for toggling VBUS. This is needed to work
+ * around an issue where either XHCI only works with USB 2.0 or OTG doesn't
+ * work, depending on how VBUS is configured. Having USB 3.0 seems better.
+ */
+&vcc_host_5v {
+	/delete-property/ regulator-always-on;
+	/delete-property/ regulator-boot-on;
+};
+
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
+&vcc_sd {
+	u-boot,dm-spl;
+};
+
+&spi0 {
+	spi_flash: spiflash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-rock64.dts b/roms/u-boot/arch/arm/dts/rk3328-rock64.dts
new file mode 100644
index 000000000..ebf3eb222
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-rock64.dts
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Pine64 Rock64";
+	compatible = "pine64,rock64", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_gpio>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host_5v: vcc-host-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		standby {
+			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "rockchip,rk3328";
+		dais = <&i2s1_p0
+			&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+};
+
+&codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	port@0 {
+		codec_p0_0: endpoint {
+			remote-endpoint = <&i2s1_p0_0>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s1 {
+	status = "okay";
+
+	i2s1_p0: port {
+		i2s1_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&codec_p0_0>;
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdifm0_tx>;
+	status = "okay";
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/* maximum speed for Rockchip SPI */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-sdram-ddr3-666.dtsi b/roms/u-boot/arch/arm/dts/rk3328-sdram-ddr3-666.dtsi
new file mode 100644
index 000000000..3e88ed443
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-sdram-ddr3-666.dtsi
@@ -0,0 +1,219 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+&dmc {
+	rockchip,sdram-params = <
+		0x1
+		0xC
+		0x3
+		0x1
+		0x0
+		0x0
+		0x10
+		0x10
+		0x10
+		0x10
+		0
+
+		0x9028b189
+		0x00000000
+		0x00000021
+		0x00000482
+		0x00000015
+		0x00000222
+		0x000000ff
+
+		333
+		3
+		1
+		0
+		0
+
+		0x00000000
+		0x43041001
+		0x00000064
+		0x0028003b
+		0x000000d0
+		0x00020053
+		0x000000d4
+		0x00020000
+		0x000000d8
+		0x00000100
+		0x000000dc
+		0x03200000
+		0x000000e0
+		0x00000000
+		0x000000e4
+		0x00090000
+		0x000000f4
+		0x000f011f
+		0x00000100
+		0x07090b06
+		0x00000104
+		0x00050209
+		0x00000108
+		0x03030407
+		0x0000010c
+		0x00202006
+		0x00000110
+		0x03020204
+		0x00000114
+		0x03030202
+		0x00000120
+		0x00000903
+		0x00000180
+		0x00800020
+		0x00000184
+		0x00000000
+		0x00000190
+		0x07010001
+		0x00000198
+		0x05001100
+		0x000001a0
+		0xc0400003
+		0x00000240
+		0x06000604
+		0x00000244
+		0x00000201
+		0x00000250
+		0x00000f00
+		0x00000490
+		0x00000001
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+
+		0x00000004
+		0x0000000a
+		0x00000028
+		0x00000006
+		0x0000002c
+		0x00000000
+		0x00000030
+		0x00000005
+		0xffffffff
+		0xffffffff
+
+		0x77
+		0x88
+		0x79
+		0x79
+		0x87
+		0x97
+		0x87
+		0x78
+		0x77
+		0x78
+		0x87
+		0x88
+		0x87
+		0x87
+		0x77
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x79
+		0x9
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-sdram-ddr4-666.dtsi b/roms/u-boot/arch/arm/dts/rk3328-sdram-ddr4-666.dtsi
new file mode 100644
index 000000000..0859649a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-sdram-ddr4-666.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+
+&dmc {
+	rockchip,sdram-params = <
+		0x1
+		0xA
+		0x2
+		0x1
+		0x0
+		0x0
+		0x11
+		0x0
+		0x11
+		0x0
+		0
+
+		0x94291288
+		0x00000000
+		0x00000027
+		0x00000462
+		0x00000015
+		0x00000242
+		0x000000ff
+
+		333
+		0
+		1
+		0
+		0
+
+		0x00000000
+		0x43049010
+		0x00000064
+		0x0028003b
+		0x000000d0
+		0x00020053
+		0x000000d4
+		0x00220000
+		0x000000d8
+		0x00000100
+		0x000000dc
+		0x00040000
+		0x000000e0
+		0x00000000
+		0x000000e4
+		0x00110000
+		0x000000e8
+		0x00000420
+		0x000000ec
+		0x00000400
+		0x000000f4
+		0x000f011f
+		0x00000100
+		0x09060b06
+		0x00000104
+		0x00020209
+		0x00000108
+		0x0505040a
+		0x0000010c
+		0x0040400c
+		0x00000110
+		0x05030206
+		0x00000114
+		0x03030202
+		0x00000120
+		0x03030b03
+		0x00000124
+		0x00020208
+		0x00000180
+		0x01000040
+		0x00000184
+		0x00000000
+		0x00000190
+		0x07030003
+		0x00000198
+		0x05001100
+		0x000001a0
+		0xc0400003
+		0x00000240
+		0x06000604
+		0x00000244
+		0x00000201
+		0x00000250
+		0x00000f00
+		0x00000490
+		0x00000001
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+
+		0x00000004
+		0x0000000c
+		0x00000028
+		0x0000000a
+		0x0000002c
+		0x00000000
+		0x00000030
+		0x00000009
+		0xffffffff
+		0xffffffff
+
+		0x77
+		0x88
+		0x79
+		0x79
+		0x87
+		0x97
+		0x87
+		0x78
+		0x77
+		0x78
+		0x87
+		0x88
+		0x87
+		0x87
+		0x77
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x79
+		0x9
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-sdram-lpddr3-1600.dtsi b/roms/u-boot/arch/arm/dts/rk3328-sdram-lpddr3-1600.dtsi
new file mode 100644
index 000000000..d63c761a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-sdram-lpddr3-1600.dtsi
@@ -0,0 +1,219 @@
+/*
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+&dmc {
+	rockchip,sdram-params = <
+		0x1
+		0xC
+		0x3
+		0x1
+		0x0
+		0x0
+		0x10
+		0x10
+		0x10
+		0x10
+		0
+
+		0x98899459
+		0x00000000
+		0x0000002e
+		0x00000544
+		0x00000015
+		0x00000432
+		0x000000ff
+
+		800
+		6
+		1
+		0
+		1
+
+		0x00000000
+		0x43041008
+		0x00000064
+		0x00300054
+		0x000000d0
+		0x00500002
+		0x000000d4
+		0x00010000
+		0x000000d8
+		0x00000e03
+		0x000000dc
+		0x0043001a
+		0x000000e0
+		0x00010000
+		0x000000e4
+		0x000e0005
+		0x000000f4
+		0x000f011f
+		0x00000100
+		0x0b141b11
+		0x00000104
+		0x0003031a
+		0x00000108
+		0x03060809
+		0x0000010c
+		0x00606000
+		0x00000110
+		0x08020409
+		0x00000114
+		0x01010606
+		0x00000118
+		0x02020004
+		0x00000120
+		0x00000404
+		0x00000138
+		0x00000058
+		0x00000180
+		0x00900024
+		0x00000184
+		0x01400000
+		0x00000190
+		0x07050002
+		0x00000198
+		0x05001100
+		0x000001a0
+		0xc0400003
+		0x00000240
+		0x0a020b28
+		0x00000244
+		0x00000101
+		0x00000250
+		0x00000f00
+		0x00000490
+		0x00000001
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+
+		0x00000004
+		0x0000000b
+		0x00000028
+		0x0000000c
+		0x0000002c
+		0x00000000
+		0x00000030
+		0x00000006
+		0xffffffff
+		0xffffffff
+
+		0x77
+		0x88
+		0x79
+		0x79
+		0x87
+		0x97
+		0x87
+		0x78
+		0x77
+		0x78
+		0x87
+		0x88
+		0x87
+		0x87
+		0x77
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x79
+		0x9
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-sdram-lpddr3-666.dtsi b/roms/u-boot/arch/arm/dts/rk3328-sdram-lpddr3-666.dtsi
new file mode 100644
index 000000000..df42bb29c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-sdram-lpddr3-666.dtsi
@@ -0,0 +1,219 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+&dmc {
+	rockchip,sdram-params = <
+		0x1
+		0xC
+		0x3
+		0x1
+		0x0
+		0x0
+		0x10
+		0x10
+		0x10
+		0x10
+		0
+
+		0x8c48a18a
+		0x00000000
+		0x00000021
+		0x00000482
+		0x00000015
+		0x0000021a
+		0x000000ff
+
+		333
+		6
+		1
+		0
+		0
+
+		0x00000000
+		0x43041008
+		0x00000064
+		0x00140023
+		0x000000d0
+		0x00220002
+		0x000000d4
+		0x00010000
+		0x000000d8
+		0x00000703
+		0x000000dc
+		0x00830004
+		0x000000e0
+		0x00010000
+		0x000000e4
+		0x00070003
+		0x000000f4
+		0x000f011f
+		0x00000100
+		0x06090b07
+		0x00000104
+		0x0002020b
+		0x00000108
+		0x02030506
+		0x0000010c
+		0x00505000
+		0x00000110
+		0x03020204
+		0x00000114
+		0x01010303
+		0x00000118
+		0x02020003
+		0x00000120
+		0x00000303
+		0x00000138
+		0x00000025
+		0x00000180
+		0x003c000f
+		0x00000184
+		0x00900000
+		0x00000190
+		0x07020000
+		0x00000198
+		0x05001100
+		0x000001a0
+		0xc0400003
+		0x00000240
+		0x0900090c
+		0x00000244
+		0x00000101
+		0x00000250
+		0x00000f00
+		0x00000490
+		0x00000001
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
+
+		0x00000004
+		0x0000000b
+		0x00000028
+		0x00000006
+		0x0000002c
+		0x00000000
+		0x00000030
+		0x00000003
+		0xffffffff
+		0xffffffff
+
+		0x77
+		0x88
+		0x79
+		0x79
+		0x87
+		0x97
+		0x87
+		0x78
+		0x77
+		0x78
+		0x87
+		0x88
+		0x87
+		0x87
+		0x77
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x78
+		0x77
+		0x79
+		0x9
+
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x78
+		0x69
+		0x9
+
+		0x77
+		0x78
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x77
+		0x79
+		0x9
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3328-u-boot.dtsi
new file mode 100644
index 000000000..163355826
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328-u-boot.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		u-boot,spl-boot-order = &emmc, &sdmmc;
+	};
+
+	dmc: dmc {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3328-dmc";
+		reg = <0x0 0xff400000 0x0 0x1000
+		       0x0 0xff780000 0x0 0x3000
+		       0x0 0xff100000 0x0 0x1000
+		       0x0 0xff440000 0x0 0x1000
+		       0x0 0xff720000 0x0 0x1000
+		       0x0 0xff798000 0x0 0x1000>;
+	};
+
+	usb_host0_xhci: usb@ff600000 {
+		compatible = "rockchip,rk3328-xhci";
+		reg = <0x0 0xff600000 0x0 0x100000>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		snps,dis-enblslpm-quirk;
+		snps,phyif-utmi-bits = <16>;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis-u2-susphy-quirk;
+		status = "disabled";
+	};
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+	clock-frequency = <24000000>;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+
+	/* mmc to sram can't do dma, prevent aborts transfering TF-A parts */
+	u-boot,spl-fifo-mode;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+
+	/* mmc to sram can't do dma, prevent aborts transfering TF-A parts */
+	u-boot,spl-fifo-mode;
+};
+
+&usb20_otg {
+	hnp-srp-disable;
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3328.dtsi b/roms/u-boot/arch/arm/dts/rk3328.dtsi
new file mode 100644
index 000000000..945387e57
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3328.dtsi
@@ -0,0 +1,1904 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3328-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3328-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3328";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		ethernet0 = &gmac2io;
+		ethernet1 = &gmac2phy;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dmac: dmac@ff1f0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff1f0000 0x0 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+	};
+
+	analog_sound: analog-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "Analog";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,name = "HDMI";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	i2s0: i2s@ff000000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff000000 0x0 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 11>, <&dmac 12>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@ff010000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff010000 0x0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 14>, <&dmac 15>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@ff020000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff020000 0x0 0x1000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 0>, <&dmac 1>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif: spdif@ff030000 {
+		compatible = "rockchip,rk3328-spdif";
+		reg = <0x0 0xff030000 0x0 0x1000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac 10>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdifm2_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	pdm: pdm@ff040000 {
+		compatible = "rockchip,pdm";
+		reg = <0x0 0xff040000 0x0 0x1000>;
+		clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
+		clock-names = "pdm_clk", "pdm_hclk";
+		dmas = <&dmac 16>;
+		dma-names = "rx";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pdmm0_clk
+			     &pdmm0_sdi0
+			     &pdmm0_sdi1
+			     &pdmm0_sdi2
+			     &pdmm0_sdi3>;
+		pinctrl-1 = <&pdmm0_clk_sleep
+			     &pdmm0_sdi0_sleep
+			     &pdmm0_sdi1_sleep
+			     &pdmm0_sdi2_sleep
+			     &pdmm0_sdi3_sleep>;
+		status = "disabled";
+	};
+
+	grf: syscon@ff100000 {
+		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff100000 0x0 0x1000>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3328-io-voltage-domain";
+			status = "disabled";
+		};
+
+		grf_gpio: grf-gpio {
+			compatible = "rockchip,rk3328-grf-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		power: power-controller {
+			compatible = "rockchip,rk3328-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_hevc@RK3328_PD_HEVC {
+				reg = <RK3328_PD_HEVC>;
+			};
+			pd_video@RK3328_PD_VIDEO {
+				reg = <RK3328_PD_VIDEO>;
+			};
+			pd_vpu@RK3328_PD_VPU {
+				reg = <RK3328_PD_VPU>;
+				clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+			};
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x5c8>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	uart0: serial@ff110000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff110000 0x0 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 2>, <&dmac 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff120000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff120000 0x0 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 4>, <&dmac 5>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff130000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff130000 0x0 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 6>, <&dmac 7>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m1_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff150000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff160000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff170000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff170000 0x0 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff180000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff180000 0x0 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff190000 {
+		compatible = "rockchip,rk3328-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff190000 0x0 0x1000>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 8>, <&dmac 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0m2_clk &spi0m2_tx &spi0m2_rx &spi0m2_cs0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff1a0000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x0 0xff1a0000 0x0 0x100>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+	};
+
+	pwm0: pwm@ff1b0000 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff1b0010 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff1b0020 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff1b0030 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0030 0x0 0x10>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwmir_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				soc_crit: soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+	};
+
+	tsadc: tsadc@ff250000 {
+		compatible = "rockchip,rk3328-tsadc";
+		reg = <0x0 0xff250000 0x0 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <100000>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	efuse: efuse@ff260000 {
+		compatible = "rockchip,rk3328-efuse";
+		reg = <0x0 0xff260000 0x0 0x50>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru SCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+		rockchip,efuse-size = <0x20>;
+
+		/* Data cells */
+		efuse_id: id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		logic_leakage: logic-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		efuse_cpu_version: cpu-version@1a {
+			reg = <0x1a 0x1>;
+			bits = <3 3>;
+		};
+	};
+
+	saradc: adc@ff280000 {
+		compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	gpu: gpu@ff300000 {
+		compatible = "rockchip,rk3328-mali", "arm,mali-450";
+		reg = <0x0 0xff300000 0x0 0x40000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		resets = <&cru SRST_GPU_A>;
+	};
+
+	h265e_mmu: iommu@ff330200 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff330200 0 0x100>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "h265e_mmu";
+		clocks = <&cru ACLK_H265>, <&cru PCLK_H265>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vepu_mmu: iommu@ff340800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff340800 0x0 0x40>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu_mmu";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@ff350000 {
+		compatible = "rockchip,rk3328-vpu";
+		reg = <0x0 0xff350000 0x0 0x800>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vdpu";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3328_PD_VPU>;
+	};
+
+	vpu_mmu: iommu@ff350800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff350800 0x0 0x40>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vpu_mmu";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3328_PD_VPU>;
+	};
+
+	rkvdec_mmu: iommu@ff360480 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "rkvdec_mmu";
+		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vop: vop@ff370000 {
+		compatible = "rockchip,rk3328-vop";
+		reg = <0x0 0xff370000 0x0 0x3efc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@ff373f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff373f00 0x0 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vop_mmu";
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@ff3c0000 {
+		compatible = "rockchip,rk3328-dw-hdmi";
+		reg = <0x0 0xff3c0000 0x0 0x20000>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI>,
+			 <&cru SCLK_HDMI_SFC>,
+			 <&cru SCLK_RTC32K>;
+		clock-names = "iahb",
+			      "isfr",
+			      "cec";
+		phys = <&hdmiphy>;
+		phy-names = "hdmi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	codec: codec@ff410000 {
+		compatible = "rockchip,rk3328-codec";
+		reg = <0x0 0xff410000 0x0 0x1000>;
+		clocks = <&cru PCLK_ACODECPHY>, <&cru SCLK_I2S1>;
+		clock-names = "pclk", "mclk";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmiphy: phy@ff430000 {
+		compatible = "rockchip,rk3328-hdmi-phy";
+		reg = <0x0 0xff430000 0x0 0x10000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+		clock-names = "sysclk", "refoclk", "refpclk";
+		clock-output-names = "hdmi_phy";
+		#clock-cells = <0>;
+		nvmem-cells = <&efuse_cpu_version>;
+		nvmem-cell-names = "cpu-version";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@ff440000 {
+		compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
+		reg = <0x0 0xff440000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks =
+			/*
+			 * CPLL should run at 1200, but that is to high for
+			 * the initial dividers of most of its children.
+			 * We need set cpll child clk div first,
+			 * and then set the cpll frequency.
+			 */
+			<&cru DCLK_LCDC>, <&cru SCLK_PDM>,
+			<&cru SCLK_RTC32K>, <&cru SCLK_UART0>,
+			<&cru SCLK_UART1>, <&cru SCLK_UART2>,
+			<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+			<&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>,
+			<&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
+			<&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
+			<&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
+			<&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
+			<&cru SCLK_SDIO>, <&cru SCLK_TSP>,
+			<&cru SCLK_WIFI>, <&cru ARMCLK>,
+			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			<&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>,
+			<&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+			<&cru HCLK_PERI>, <&cru PCLK_PERI>,
+			<&cru SCLK_RTC32K>;
+		assigned-clock-parents =
+			<&cru HDMIPHY>, <&cru PLL_APLL>,
+			<&cru PLL_GPLL>, <&xin24m>,
+			<&xin24m>, <&xin24m>;
+		assigned-clock-rates =
+			<0>, <61440000>,
+			<0>, <24000000>,
+			<24000000>, <24000000>,
+			<15000000>, <15000000>,
+			<100000000>, <100000000>,
+			<100000000>, <100000000>,
+			<50000000>, <100000000>,
+			<100000000>, <100000000>,
+			<50000000>, <50000000>,
+			<50000000>, <50000000>,
+			<24000000>, <600000000>,
+			<491520000>, <1200000000>,
+			<150000000>, <75000000>,
+			<75000000>, <150000000>,
+			<75000000>, <75000000>,
+			<32768>;
+	};
+
+	usb2phy_grf: syscon@ff450000 {
+		compatible = "rockchip,rk3328-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2-phy@100 {
+			compatible = "rockchip,rk3328-usb2phy";
+			reg = <0x100 0x10>;
+			clocks = <&xin24m>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			#clock-cells = <0>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+	};
+
+	sdmmc: mmc@ff500000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff500000 0x0 0x4000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ff510000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff510000 0x0 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	emmc: mmc@ff520000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff520000 0x0 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	gmac2io: ethernet@ff540000 {
+		compatible = "rockchip,rk3328-gmac";
+		reg = <0x0 0xff540000 0x0 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_RX>,
+			 <&cru SCLK_MAC2IO_TX>, <&cru SCLK_MAC2IO_REF>,
+			 <&cru SCLK_MAC2IO_REFOUT>, <&cru ACLK_MAC2IO>,
+			 <&cru PCLK_MAC2IO>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		resets = <&cru SRST_GMAC2IO_A>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
+		status = "disabled";
+	};
+
+	gmac2phy: ethernet@ff550000 {
+		compatible = "rockchip,rk3328-gmac";
+		reg = <0x0 0xff550000 0x0 0x10000>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC2PHY_SRC>, <&cru SCLK_MAC2PHY_RXTX>,
+			 <&cru SCLK_MAC2PHY_RXTX>, <&cru SCLK_MAC2PHY_REF>,
+			 <&cru ACLK_MAC2PHY>, <&cru PCLK_MAC2PHY>,
+			 <&cru SCLK_MAC2PHY_OUT>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "aclk_mac", "pclk_mac",
+			      "clk_macphy";
+		resets = <&cru SRST_GMAC2PHY_A>, <&cru SRST_MACPHY>;
+		reset-names = "stmmaceth", "mac-phy";
+		phy-mode = "rmii";
+		phy-handle = <&phy>;
+		snps,txpbl = <0x4>;
+		status = "disabled";
+
+		mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy: phy@0 {
+				compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				clocks = <&cru SCLK_MAC2PHY_OUT>;
+				resets = <&cru SRST_MACPHY>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&fephyled_rxm1 &fephyled_linkm1>;
+				phy-is-integrated;
+			};
+		};
+	};
+
+	usb_host0_ehci: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff5c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@ff5d0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff5d0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	/*
+	 * U-boot Specific Change
+	 *
+	 * The OTG controller must come after the USB host pair for it
+	 * to work. This is likely due to lack of support for the USB
+	 * PHYs. This must be manually changed after each device tree
+	 * sync. There is no clean way to handle this in -u-boot.dtsi
+	 * files.
+	 */
+	usb20_otg: usb@ff580000 {
+		compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@ff811000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0xff811000 0 0x1000>,
+		      <0x0 0xff812000 0 0x2000>,
+		      <0x0 0xff814000 0 0x2000>,
+		      <0x0 0xff816000 0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3328-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio0@ff210000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff210000 0x0 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@ff220000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff220000 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@ff230000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff230000 0x0 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@ff240000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff240000 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>,
+						<2 RK_PA5 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
+						<0 RK_PA6 2 &pcfg_pull_none>;
+			};
+			i2c3_gpio: i2c3-gpio {
+				rockchip,pins =
+					<0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		hdmi_i2c {
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA5 1 &pcfg_pull_none>,
+						<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pdm-0 {
+			pdmm0_clk: pdmm0-clk {
+				rockchip,pins = <2 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_fsync: pdmm0-fsync {
+				rockchip,pins = <2 RK_PC7 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi0: pdmm0-sdi0 {
+				rockchip,pins = <2 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi1: pdmm0-sdi1 {
+				rockchip,pins = <2 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi2: pdmm0-sdi2 {
+				rockchip,pins = <2 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi3: pdmm0-sdi3 {
+				rockchip,pins = <2 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_clk_sleep: pdmm0-clk-sleep {
+				rockchip,pins =
+					<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi0_sleep: pdmm0-sdi0-sleep {
+				rockchip,pins =
+					<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi1_sleep: pdmm0-sdi1-sleep {
+				rockchip,pins =
+					<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi2_sleep: pdmm0-sdi2-sleep {
+				rockchip,pins =
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi3_sleep: pdmm0-sdi3-sleep {
+				rockchip,pins =
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_fsync_sleep: pdmm0-fsync-sleep {
+				rockchip,pins =
+					<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>,
+						<1 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_gpio: uart0-rts-gpio {
+				rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>,
+						<3 RK_PA6 4 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <3 RK_PA7 4 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
+			};
+
+			uart1_rts_gpio: uart1-rts-gpio {
+				rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart2-0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>,
+						<1 RK_PA1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2-1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>,
+						<2 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0-0 {
+			spi0m0_clk: spi0m0-clk {
+				rockchip,pins = <2 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_cs0: spi0m0-cs0 {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_tx: spi0m0-tx {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_rx: spi0m0-rx {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_cs1: spi0m0-cs1 {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi0-1 {
+			spi0m1_clk: spi0m1-clk {
+				rockchip,pins = <3 RK_PC7 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_cs0: spi0m1-cs0 {
+				rockchip,pins = <3 RK_PD2 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_tx: spi0m1-tx {
+				rockchip,pins = <3 RK_PD1 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_rx: spi0m1-rx {
+				rockchip,pins = <3 RK_PD0 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_cs1: spi0m1-cs1 {
+				rockchip,pins = <3 RK_PD3 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi0-2 {
+			spi0m2_clk: spi0m2-clk {
+				rockchip,pins = <3 RK_PA0 4 &pcfg_pull_up>;
+			};
+
+			spi0m2_cs0: spi0m2-cs0 {
+				rockchip,pins = <3 RK_PB0 3 &pcfg_pull_up>;
+			};
+
+			spi0m2_tx: spi0m2-tx {
+				rockchip,pins = <3 RK_PA1 4 &pcfg_pull_up>;
+			};
+
+			spi0m2_rx: spi0m2-rx {
+				rockchip,pins = <3 RK_PA2 4 &pcfg_pull_up>;
+			};
+		};
+
+		i2s1 {
+			i2s1_mclk: i2s1-mclk {
+				rockchip,pins = <2 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sclk: i2s1-sclk {
+				rockchip,pins = <2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			i2s1_lrckrx: i2s1-lrckrx {
+				rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			i2s1_lrcktx: i2s1-lrcktx {
+				rockchip,pins = <2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdi: i2s1-sdi {
+				rockchip,pins = <2 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdo: i2s1-sdo {
+				rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio1: i2s1-sdio1 {
+				rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio2: i2s1-sdio2 {
+				rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio3: i2s1-sdio3 {
+				rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sleep: i2s1-sleep {
+				rockchip,pins =
+					<2 RK_PB7 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC0 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC1 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s2-0 {
+			i2s2m0_mclk: i2s2m0-mclk {
+				rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sclk: i2s2m0-sclk {
+				rockchip,pins = <1 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_lrckrx: i2s2m0-lrckrx {
+				rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_lrcktx: i2s2m0-lrcktx {
+				rockchip,pins = <1 RK_PC7 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sdi: i2s2m0-sdi {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sdo: i2s2m0-sdo {
+				rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sleep: i2s2m0-sleep {
+				rockchip,pins =
+					<1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s2-1 {
+			i2s2m1_mclk: i2s2m1-mclk {
+				rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sclk: i2s2m1-sclk {
+				rockchip,pins = <3 RK_PA0 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_lrckrx: i2sm1-lrckrx {
+				rockchip,pins = <3 RK_PB0 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_lrcktx: i2s2m1-lrcktx {
+				rockchip,pins = <3 RK_PB0 4 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sdi: i2s2m1-sdi {
+				rockchip,pins = <3 RK_PA2 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sdo: i2s2m1-sdo {
+				rockchip,pins = <3 RK_PA1 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sleep: i2s2m1-sleep {
+				rockchip,pins =
+					<1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA0 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PB0 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA2 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		spdif-0 {
+			spdifm0_tx: spdifm0-tx {
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif-1 {
+			spdifm1_tx: spdifm1-tx {
+				rockchip,pins = <2 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		spdif-2 {
+			spdifm2_tx: spdifm2-tx {
+				rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc0-0 {
+			sdmmc0m0_pwren: sdmmc0m0-pwren {
+				rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0m0_gpio: sdmmc0m0-gpio {
+				rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0-1 {
+			sdmmc0m1_pwren: sdmmc0m1-pwren {
+				rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0m1_gpio: sdmmc0m1-gpio {
+				rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0 {
+			sdmmc0_clk: sdmmc0-clk {
+				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc0_cmd: sdmmc0-cmd {
+				rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_dectn: sdmmc0-dectn {
+				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0_wrprt: sdmmc0-wrprt {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0_bus1: sdmmc0-bus1 {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_bus4: sdmmc0-bus4 {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA1 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA2 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_gpio: sdmmc0-gpio {
+				rockchip,pins =
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0ext {
+			sdmmc0ext_clk: sdmmc0ext-clk {
+				rockchip,pins = <3 RK_PA2 3 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc0ext_cmd: sdmmc0ext-cmd {
+				rockchip,pins = <3 RK_PA0 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_wrprt: sdmmc0ext-wrprt {
+				rockchip,pins = <3 RK_PA3 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_dectn: sdmmc0ext-dectn {
+				rockchip,pins = <3 RK_PA1 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_bus1: sdmmc0ext-bus1 {
+				rockchip,pins = <3 RK_PA4 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_bus4: sdmmc0ext-bus4 {
+				rockchip,pins =
+					<3 RK_PA4 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA5 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA6 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA7 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_gpio: sdmmc0ext-gpio {
+				rockchip,pins =
+					<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc1 {
+			sdmmc1_clk: sdmmc1-clk {
+				rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc1_cmd: sdmmc1-cmd {
+				rockchip,pins = <1 RK_PB5 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_pwren: sdmmc1-pwren {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_wrprt: sdmmc1-wrprt {
+				rockchip,pins = <1 RK_PC4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_dectn: sdmmc1-dectn {
+				rockchip,pins = <1 RK_PC3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_bus1: sdmmc1-bus1 {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_bus4: sdmmc1-bus4 {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>,
+						<1 RK_PB7 1 &pcfg_pull_up_8ma>,
+						<1 RK_PC0 1 &pcfg_pull_up_8ma>,
+						<1 RK_PC1 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_gpio: sdmmc1-gpio {
+				rockchip,pins =
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <3 RK_PC5 2 &pcfg_pull_none_12ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins = <3 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			emmc_rstnout: emmc-rstnout {
+				rockchip,pins = <3 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <0 RK_PA7 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<0 RK_PA7 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD4 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD5 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD6 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<0 RK_PA7 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD4 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD5 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD6 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD7 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC0 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC1 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC2 2 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwmir {
+			pwmir_pin: pwmir-pin {
+				rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>;
+			};
+		};
+
+		gmac-1 {
+			rgmiim1_pins: rgmiim1-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<1 RK_PB4 2 &pcfg_pull_none_8ma>,
+					/* mac_rxclk */
+					<1 RK_PB5 2 &pcfg_pull_none_4ma>,
+					/* mac_mdio */
+					<1 RK_PC3 2 &pcfg_pull_none_4ma>,
+					/* mac_txen */
+					<1 RK_PD1 2 &pcfg_pull_none_8ma>,
+					/* mac_clk */
+					<1 RK_PC5 2 &pcfg_pull_none_4ma>,
+					/* mac_rxdv */
+					<1 RK_PC6 2 &pcfg_pull_none_4ma>,
+					/* mac_mdc */
+					<1 RK_PC7 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd1 */
+					<1 RK_PB2 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd0 */
+					<1 RK_PB3 2 &pcfg_pull_none_4ma>,
+					/* mac_txd1 */
+					<1 RK_PB0 2 &pcfg_pull_none_8ma>,
+					/* mac_txd0 */
+					<1 RK_PB1 2 &pcfg_pull_none_8ma>,
+					/* mac_rxd3 */
+					<1 RK_PB6 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd2 */
+					<1 RK_PB7 2 &pcfg_pull_none_4ma>,
+					/* mac_txd3 */
+					<1 RK_PC0 2 &pcfg_pull_none_8ma>,
+					/* mac_txd2 */
+					<1 RK_PC1 2 &pcfg_pull_none_8ma>,
+
+					/* mac_txclk */
+					<0 RK_PB0 1 &pcfg_pull_none_8ma>,
+					/* mac_txen */
+					<0 RK_PB4 1 &pcfg_pull_none_8ma>,
+					/* mac_clk */
+					<0 RK_PD0 1 &pcfg_pull_none_4ma>,
+					/* mac_txd1 */
+					<0 RK_PC0 1 &pcfg_pull_none_8ma>,
+					/* mac_txd0 */
+					<0 RK_PC1 1 &pcfg_pull_none_8ma>,
+					/* mac_txd3 */
+					<0 RK_PC7 1 &pcfg_pull_none_8ma>,
+					/* mac_txd2 */
+					<0 RK_PC6 1 &pcfg_pull_none_8ma>;
+			};
+
+			rmiim1_pins: rmiim1-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<1 RK_PC3 2 &pcfg_pull_none_2ma>,
+					/* mac_txen */
+					<1 RK_PD1 2 &pcfg_pull_none_12ma>,
+					/* mac_clk */
+					<1 RK_PC5 2 &pcfg_pull_none_2ma>,
+					/* mac_rxer */
+					<1 RK_PD0 2 &pcfg_pull_none_2ma>,
+					/* mac_rxdv */
+					<1 RK_PC6 2 &pcfg_pull_none_2ma>,
+					/* mac_mdc */
+					<1 RK_PC7 2 &pcfg_pull_none_2ma>,
+					/* mac_rxd1 */
+					<1 RK_PB2 2 &pcfg_pull_none_2ma>,
+					/* mac_rxd0 */
+					<1 RK_PB3 2 &pcfg_pull_none_2ma>,
+					/* mac_txd1 */
+					<1 RK_PB0 2 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<1 RK_PB1 2 &pcfg_pull_none_12ma>,
+
+					/* mac_mdio */
+					<0 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<0 RK_PB4 1 &pcfg_pull_none>,
+					/* mac_clk */
+					<0 RK_PD0 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<0 RK_PC3 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<0 RK_PC0 1 &pcfg_pull_none>,
+					/* mac_txd0 */
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		gmac2phy {
+			fephyled_speed10: fephyled-speed10 {
+				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
+			};
+
+			fephyled_duplex: fephyled-duplex {
+				rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
+			};
+
+			fephyled_rxm1: fephyled-rxm1 {
+				rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			fephyled_txm1: fephyled-txm1 {
+				rockchip,pins = <2 RK_PD1 3 &pcfg_pull_none>;
+			};
+
+			fephyled_linkm1: fephyled-linkm1 {
+				rockchip,pins = <2 RK_PD0 2 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc_pin {
+			tsadc_int: tsadc-int {
+				rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
+			};
+			tsadc_gpio: tsadc-gpio {
+				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		hdmi_pin {
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PA4 1 &pcfg_pull_down>;
+			};
+		};
+
+		cif-0 {
+			dvp_d2d9_m0:dvp-d2d9-m0 {
+				rockchip,pins =
+					/* cif_d0 */
+					<3 RK_PA4 2 &pcfg_pull_none>,
+					/* cif_d1 */
+					<3 RK_PA5 2 &pcfg_pull_none>,
+					/* cif_d2 */
+					<3 RK_PA6 2 &pcfg_pull_none>,
+					/* cif_d3 */
+					<3 RK_PA7 2 &pcfg_pull_none>,
+					/* cif_d4 */
+					<3 RK_PB0 2 &pcfg_pull_none>,
+					/* cif_d5m0 */
+					<3 RK_PB1 2 &pcfg_pull_none>,
+					/* cif_d6m0 */
+					<3 RK_PB2 2 &pcfg_pull_none>,
+					/* cif_d7m0 */
+					<3 RK_PB3 2 &pcfg_pull_none>,
+					/* cif_href */
+					<3 RK_PA1 2 &pcfg_pull_none>,
+					/* cif_vsync */
+					<3 RK_PA0 2 &pcfg_pull_none>,
+					/* cif_clkoutm0 */
+					<3 RK_PA3 2 &pcfg_pull_none>,
+					/* cif_clkin */
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+
+		cif-1 {
+			dvp_d2d9_m1:dvp-d2d9-m1 {
+				rockchip,pins =
+					/* cif_d0 */
+					<3 RK_PA4 2 &pcfg_pull_none>,
+					/* cif_d1 */
+					<3 RK_PA5 2 &pcfg_pull_none>,
+					/* cif_d2 */
+					<3 RK_PA6 2 &pcfg_pull_none>,
+					/* cif_d3 */
+					<3 RK_PA7 2 &pcfg_pull_none>,
+					/* cif_d4 */
+					<3 RK_PB0 2 &pcfg_pull_none>,
+					/* cif_d5m1 */
+					<2 RK_PC0 4 &pcfg_pull_none>,
+					/* cif_d6m1 */
+					<2 RK_PC1 4 &pcfg_pull_none>,
+					/* cif_d7m1 */
+					<2 RK_PC2 4 &pcfg_pull_none>,
+					/* cif_href */
+					<3 RK_PA1 2 &pcfg_pull_none>,
+					/* cif_vsync */
+					<3 RK_PA0 2 &pcfg_pull_none>,
+					/* cif_clkoutm1 */
+					<2 RK_PB7 4 &pcfg_pull_none>,
+					/* cif_clkin */
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-geekbox-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3368-geekbox-u-boot.dtsi
new file mode 100644
index 000000000..0b724fa45
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-geekbox-u-boot.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include "rk3368-u-boot.dtsi"
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&service_msch {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&pmugrf {
+	u-boot,dm-pre-reloc;
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-geekbox.dts b/roms/u-boot/arch/arm/dts/rk3368-geekbox.dts
new file mode 100644
index 000000000..46cdddfce
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-geekbox.dts
@@ -0,0 +1,319 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "GeekBox";
+	compatible = "geekbuying,geekbox", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		blue {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:blue:led";
+			default-state = "on";
+		};
+
+		red {
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:red:led";
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	clock-frequency = <150000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	non-removable;
+	num-slots = <1>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&gmac {
+	status = "okay";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_log";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vcc18_flash: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_flash";
+			};
+
+			vcc33_lcd: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_lcd";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			vcca_18: LDO_REG4 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_18";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_sd";
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lan";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>; /* CRU */
+	rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi
new file mode 100644
index 000000000..7826d1e70
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include "rk3368-u-boot.dtsi"
+
+/ {
+	config {
+		u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+		u-boot,mmc-env-offset = <0x4000>;      /* @  16KB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		u-boot,spl-boot-order = &emmc, &sdmmc;
+	};
+
+	smbios {
+		compatible = "u-boot,sysinfo-smbios";
+
+		smbios {
+			system {
+				manufacturer = "rockchip";
+				product = "sheep_rk3368";
+			};
+
+			baseboard {
+				manufacturer = "rockchip";
+				product = "sheep_rk3368";
+			};
+
+			chassis {
+				manufacturer = "rockchip";
+				product = "sheep_rk3368";
+			};
+		};
+	};
+};
+
+&gpio2 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&service_msch {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+
+	/*
+	 * Validation of throughput using SPEC2000 shows the following
+	 * relative performance for the different memory schedules:
+	 *  - CBDR: 30.1
+	 *  - CBRD: 29.8
+	 *  - CRBD: 29.9
+	 * Note that the best performance for any given application workload
+	 * may vary from the default configured here (e.g. 164.gzip is fastest
+	 * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD).
+	 *
+	 * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for
+	 * details on the 'rockchip,memory-schedule' property and how it
+	 * affects the physical-address to device-address mapping.
+	 */
+	rockchip,memory-schedule = <DMC_MSCH_CBDR>;
+	rockchip,ddr-frequency = <800000000>;
+	rockchip,ddr-speed-bin = <DDR3_1600K>;
+
+	status = "okay";
+};
+
+&pmugrf {
+	u-boot,dm-pre-reloc;
+};
+
+&sgrf {
+        u-boot,dm-pre-reloc;
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-spl;
+};
+
+&sdmmc {
+	u-boot,dm-spl;
+};
+
+&spi1 {
+	u-boot,dm-spl;
+
+	spiflash: w25q32dw@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&timer0 {
+	u-boot,dm-pre-reloc;
+	clock-frequency = <24000000>;
+	status = "okay";
+};
+
+
diff --git a/roms/u-boot/arch/arm/dts/rk3368-lion-haikou.dts b/roms/u-boot/arch/arm/dts/rk3368-lion-haikou.dts
new file mode 100644
index 000000000..7fcb1eace
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-lion-haikou.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368-lion.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3368-uQ7 Baseboard";
+	compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2cmux2 {
+		i2c@0 {
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
+
+		sd_card_led: led-3 {
+			label = "sd_card_led";
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <25000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi2 {
+	cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	/* alternate function of GPIO5/6 */
+	status = "disabled";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+				/* LID_BTN */
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* BATLOW# */
+				<0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* SLP_BTN# */
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* BIOS_DISABLE# */
+				<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+				<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_cd_pin: sdmmc-cd-pin {
+			rockchip,pins =
+				<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+				<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-lion.dtsi b/roms/u-boot/arch/arm/dts/rk3368-lion.dtsi
new file mode 100644
index 000000000..532e6a682
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-lion.dtsi
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	i2cmux1 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c1>;
+		mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+
+		/* Q7_GPO_I2C */
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* Q7_SMB */
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2cmux2 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+
+		/* Q7_LVDS_BLC_I2C */
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fan: fan@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				#cooling-cells = <2>;
+			};
+
+			rtc_twi: rtc@6f {
+				compatible = "isil,isl1208";
+				reg = <0x6f>;
+			};
+		};
+
+		/* Q7_GP2_I2C */
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pins>;
+
+		module_led1: led-1 {
+			label = "module_led1";
+			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		module_led2: led-2 {
+			label = "module_led2";
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	clock-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc33_io>;
+	vqmmc-supply = <&vcc18_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-handle = <&phy0>;
+	phy-supply = <&vcc33_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microsemi VSC8531-02 */
+		phy0: phy@0 {
+		compatible = "ethernet-phy-id0007.0570";
+			reg = <0>;
+			vsc8531,clk-out-frequency = <125000000>;
+			vsc8531,edge-slowdown = <7>;
+			vsc8531,led-0-mode = <1>;
+			vsc8531,led-1-mode = <2>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc33_io: DCDC_REG4 {
+				regulator-name = "vcc33_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc33_video: LDO_REG2 {
+				regulator-name = "vcc33_video";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd10_pll: LDO_REG3 {
+				regulator-name = "vdd10_pll";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc18_io: LDO_REG4 {
+				regulator-name = "vcc18_io";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			vdd10_video: LDO_REG6 {
+				regulator-name = "vdd10_video";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc18_video: LDO_REG8 {
+				regulator-name = "vcc18_video";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		module_led_pins: module-led-pins {
+			rockchip,pins =
+				<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	norflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi
new file mode 100644
index 000000000..264fb7adf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include "rk3368-u-boot.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = &emmc;
+	};
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+
+	/*
+	 * PX5-evb(2GB) need to use CBRD mode, or else the dram is not correct
+	 * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for
+	 * details on the 'rockchip,memory-schedule' property and how it
+	 * affects the physical-address to device-address mapping.
+	 */
+	rockchip,memory-schedule = <DMC_MSCH_CBRD>;
+	rockchip,ddr-frequency = <800000000>;
+	rockchip,ddr-speed-bin = <DDR3_1600K>;
+
+	status = "okay";
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&service_msch {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&pmugrf {
+	u-boot,dm-pre-reloc;
+};
+
+&sgrf {
+	u-boot,dm-pre-reloc;
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	/* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
+	u-boot,spl-fifo-mode;
+	u-boot,dm-pre-reloc;
+};
+
+&timer0 {
+	u-boot,dm-pre-reloc;
+	clock-frequency = <24000000>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-px5-evb.dts b/roms/u-boot/arch/arm/dts/rk3368-px5-evb.dts
new file mode 100644
index 000000000..e9c5ebad4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-px5-evb.dts
@@ -0,0 +1,323 @@
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "PX5 EVB";
+	compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		blue {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:blue:led";
+			default-state = "on";
+		};
+
+		red {
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:red:led";
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	clock-frequency = <150000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	non-removable;
+	num-slots = <1>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&gmac {
+	status = "okay";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_log";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vcc18_flash: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_flash";
+			};
+
+			vcc33_lcd: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_lcd";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			vcca_18: LDO_REG4 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_18";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_sd";
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lan";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>; /* CRU */
+	rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-sheep-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3368-sheep-u-boot.dtsi
new file mode 100644
index 000000000..0b724fa45
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-sheep-u-boot.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include "rk3368-u-boot.dtsi"
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&service_msch {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&pmugrf {
+	u-boot,dm-pre-reloc;
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-sheep.dts b/roms/u-boot/arch/arm/dts/rk3368-sheep.dts
new file mode 100644
index 000000000..120dec1a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-sheep.dts
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip sheep board";
+	compatible = "rockchip,sheep", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		blue {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:blue:led";
+			default-state = "on";
+		};
+
+		red {
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:red:led";
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	clock-frequency = <150000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	non-removable;
+	num-slots = <1>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&gmac {
+	status = "okay";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_log";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vcc18_flash: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_flash";
+			};
+
+			vcc33_lcd: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_lcd";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			vcca_18: LDO_REG4 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_18";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_sd";
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lan";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>; /* CRU */
+	rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3368-u-boot.dtsi
new file mode 100644
index 000000000..2767c2678
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <dt-bindings/memory/rk3368-dmc.h>
+
+/ {
+	dmc: dmc@ff610000 {
+		compatible = "rockchip,rk3368-dmc", "syscon";
+		rockchip,cru = <&cru>;
+		rockchip,grf = <&grf>;
+		rockchip,msch = <&service_msch>;
+		reg = <0 0xff610000 0 0x400
+		       0 0xff620000 0 0x400>;
+	};
+
+	service_msch: syscon@ffac0000 {
+		compatible = "rockchip,rk3368-msch", "syscon";
+		reg = <0x0 0xffac0000 0x0 0x2000>;
+	};
+
+	sgrf: syscon@ff740000 {
+		compatible = "rockchip,rk3368-sgrf", "syscon";
+		reg = <0x0 0xff740000 0x0 0x1000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3368.dtsi b/roms/u-boot/arch/arm/dts/rk3368.dtsi
new file mode 100644
index 000000000..cd2c32207
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3368.dtsi
@@ -0,0 +1,1227 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/clock/rk3368-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3368";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_b0>;
+				};
+				core1 {
+					cpu = <&cpu_b1>;
+				};
+				core2 {
+					cpu = <&cpu_b2>;
+				};
+				core3 {
+					cpu = <&cpu_b3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+				core1 {
+					cpu = <&cpu_l1>;
+				};
+				core2 {
+					cpu = <&cpu_l2>;
+				};
+				core3 {
+					cpu = <&cpu_l3>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dmac_peri: dma-controller@ff250000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff250000 0x0 0x4000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC_PERI>;
+			clock-names = "apb_pclk";
+		};
+
+		dmac_bus: dma-controller@ff600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff600000 0x0 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC_BUS>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu_l0>, <&cpu_l1>, <&cpu_l2>,
+				     <&cpu_l3>, <&cpu_b0>, <&cpu_b1>,
+				     <&cpu_b2>, <&cpu_b3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	sdmmc: mmc@ff0c0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0c0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_MMC0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio0: mmc@ff0d0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0d0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_SDIO0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@ff0f0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0f0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	spi0: spi@ff110000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff120000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff130000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff140000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff150000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff160000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff170000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff170000 0x0 0x1000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff180000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff190000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1b0000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff1c0000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1c0000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+					<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <115000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3368-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		#thermal-sensor-cells = <1>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff290000 {
+		compatible = "rockchip,rk3368-gmac";
+		reg = <0x0 0xff290000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			"mac_clk_rx", "mac_clk_tx",
+			"clk_mac_ref", "clk_mac_refout",
+			"aclk_mac", "pclk_mac";
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff500000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff500000 0x0 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>;
+		status = "disabled";
+	};
+
+	usb_otg: usb@ff580000 {
+		compatible = "rockchip,rk3368-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff650000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff650000 0x0 0x1000>;
+		clocks = <&cru PCLK_I2C0>;
+		clock-names = "i2c";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff660000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff660000 0x0 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff680000 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff680010 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff680020 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680020 0x0 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff680030 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	uart2: serial@ff690000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff690000 0x0 0x100>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mbox: mbox@ff6b0000 {
+		compatible = "rockchip,rk3368-mailbox";
+		reg = <0x0 0xff6b0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MAILBOX>;
+		clock-names = "pclk_mailbox";
+		#mbox-cells = <1>;
+		status = "disabled";
+	};
+
+	pmugrf: syscon@ff738000 {
+		compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff738000 0x0 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3368-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3368-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3368-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff770000 0x0 0x1000>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3368-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	wdt: watchdog@ff800000 {
+		compatible = "rockchip,rk3368-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff800000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	timer0: timer@ff810000 {
+		compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xff810000 0x0 0x20>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spdif: spdif@ff880000 {
+		compatible = "rockchip,rk3368-spdif";
+		reg = <0x0 0xff880000 0x0 0x1000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac_bus 3>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";
+	};
+
+	i2s_2ch: i2s-2ch@ff890000 {
+		compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff890000 0x0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
+		dmas = <&dmac_bus 6>, <&dmac_bus 7>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s_8ch: i2s-8ch@ff898000 {
+		compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff898000 0x0 0x1000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S_8CH>, <&cru HCLK_I2S_8CH>;
+		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_8ch_bus>;
+		status = "disabled";
+	};
+
+	iep_mmu: iommu@ff900800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff900800 0x0 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "iep_mmu";
+		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>,
+		      <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "isp_mmu";
+		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		rockchip,disable-mmu-reset;
+		status = "disabled";
+	};
+
+	vop_mmu: iommu@ff930300 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff930300 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vop_mmu";
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hevc_mmu: iommu@ff9a0440 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0440 0x0 0x40>,
+		      <0x0 0xff9a0480 0x0 0x40>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hevc_mmu";
+		clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vpu_mmu: iommu@ff9a0800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0800 0x0 0x100>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu_mmu", "vdpu_mmu";
+		clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	efuse256: efuse@ffb00000 {
+		compatible = "rockchip,rk3368-efuse";
+		reg = <0x0 0xffb00000 0x0 0x20>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE256>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		temp_adjust: temp-adjust@1f {
+			reg = <0x1f 0x1>;
+		};
+	};
+
+	gic: interrupt-controller@ffb71000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x0 0xffb71000 0x0 0x1000>,
+		      <0x0 0xffb72000 0x0 0x2000>,
+		      <0x0 0xffb74000 0x0 0x2000>,
+		      <0x0 0xffb76000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3368-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		ranges;
+
+		gpio0: gpio0@ff750000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff750000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO0>;
+			interrupts = <GIC_SPI 0x51 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio1: gpio1@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff780000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO1>;
+			interrupts = <GIC_SPI 0x52 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio2: gpio2@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff790000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO2>;
+			interrupts = <GIC_SPI 0x53 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio3: gpio3@ff7a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7a0000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO3>;
+			interrupts = <GIC_SPI 0x54 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+						<1 RK_PC3 2 &pcfg_pull_up>,
+						<1 RK_PC4 2 &pcfg_pull_up>,
+						<1 RK_PC5 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+						<1 RK_PC3 2 &pcfg_pull_up>,
+						<1 RK_PC4 2 &pcfg_pull_up>,
+						<1 RK_PC5 2 &pcfg_pull_up>,
+						<1 RK_PC6 2 &pcfg_pull_up>,
+						<1 RK_PC7 2 &pcfg_pull_up>,
+						<1 RK_PD0 2 &pcfg_pull_up>,
+						<1 RK_PD1 2 &pcfg_pull_up>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins =	<3 RK_PC6 1 &pcfg_pull_none>,
+						<3 RK_PD0 1 &pcfg_pull_none>,
+						<3 RK_PC3 1 &pcfg_pull_none>,
+						<3 RK_PB0 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB1 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB2 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB6 1 &pcfg_pull_none_12ma>,
+						<3 RK_PD4 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB5 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB7 1 &pcfg_pull_none>,
+						<3 RK_PC0 1 &pcfg_pull_none>,
+						<3 RK_PC1 1 &pcfg_pull_none>,
+						<3 RK_PC2 1 &pcfg_pull_none>,
+						<3 RK_PD1 1 &pcfg_pull_none>,
+						<3 RK_PC4 1 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins =	<3 RK_PC6 1 &pcfg_pull_none>,
+						<3 RK_PD0 1 &pcfg_pull_none>,
+						<3 RK_PC3 1 &pcfg_pull_none>,
+						<3 RK_PB0 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB1 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB5 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB7 1 &pcfg_pull_none>,
+						<3 RK_PC0 1 &pcfg_pull_none>,
+						<3 RK_PC4 1 &pcfg_pull_none>,
+						<3 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+						<0 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>,
+						<2 RK_PC6 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_none>,
+						<3 RK_PD7 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>,
+						<1 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>,
+						<3 RK_PD1 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins = <3 RK_PD2 2 &pcfg_pull_none>,
+						<3 RK_PD3 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_8ch_bus: i2s-8ch-bus {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB7 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC2 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none>,
+						<2 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <3 RK_PD5 3 &pcfg_pull_none>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>,
+						<2 RK_PD5 1 &pcfg_pull_up>,
+						<2 RK_PD6 1 &pcfg_pull_up>,
+						<2 RK_PD7 1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins = <3 RK_PA0 1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins = <3 RK_PA2 1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins = <3 RK_PA3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins = <3 RK_PA4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins = <3 RK_PA5 1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>,
+						<2 RK_PA6 1 &pcfg_pull_up>,
+						<2 RK_PA7 1 &pcfg_pull_up>,
+						<2 RK_PB0 1 &pcfg_pull_up>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins =	<2 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <1 RK_PD5 2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <1 RK_PD0 3 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <1 RK_PD1 3 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <1 RK_PC7 3 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <1 RK_PC6 3 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <1 RK_PB7 2 &pcfg_pull_up>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <3 RK_PD4 2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <1 RK_PC0 2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <1 RK_PC1 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins = <0 RK_PB4 2 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins = <0 RK_PB2 2 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <0 RK_PC4 3 &pcfg_pull_up>,
+						<0 RK_PC5 3 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <0 RK_PC6 3 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <0 RK_PC7 3 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <2 RK_PA6 2 &pcfg_pull_up>,
+						<2 RK_PA5 2 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <3 RK_PD5 2 &pcfg_pull_up>,
+						<3 RK_PD6 3 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <3 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins = <0 RK_PD3 3 &pcfg_pull_up>,
+						<0 RK_PD2 3 &pcfg_pull_none>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins = <0 RK_PD0 3 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins = <0 RK_PD1 3 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-evb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-evb-u-boot.dtsi
new file mode 100644
index 000000000..5e39b1493
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-evb-u-boot.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1600.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&rk808 {
+	u-boot,dm-pre-reloc;
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vdd_center {
+	regulator-init-microvolt = <900000>;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-evb.dts b/roms/u-boot/arch/arm/dts/rk3399-evb.dts
new file mode 100644
index 000000000..694b0d08d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-evb.dts
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+	model = "Rockchip RK3399 Evaluation Board";
+	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	edp_panel: edp-panel {
+		compatible ="lg,lp079qx1-sp0v";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc3v3_s0>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vdd_center: vdd-center {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 25000 0>;
+		regulator-name = "vdd_center";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&edp {
+	status = "okay";
+	force-hpd;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "disabled";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-ficus-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-ficus-u-boot.dtsi
new file mode 100644
index 000000000..38e0897db
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-ficus-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-ddr3-1600.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-ficus.dts b/roms/u-boot/arch/arm/dts/rk3399-ficus.dts
new file mode 100644
index 000000000..ebe2ee77b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-ficus.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+	model = "96boards RK3399 Ficus";
+	compatible = "vamrs,ficus", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+			    <&user_led4>, <&wlan_led>, <&bt_led>;
+
+		user_led1 {
+			label = "red:user1";
+			gpios = <&gpio4 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "red:user2";
+			gpios = <&gpio4 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "red:user3";
+			gpios = <&gpio4 30 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4 {
+			label = "red:user4";
+			gpios = <&gpio1 0 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led {
+			label = "red:wlan";
+			gpios = <&gpio1 1 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "red:bt";
+			gpios = <&gpio1 4 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_sys>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	gmac {
+		rgmii_sleep_pins: rgmii-sleep-pins {
+			rockchip,pins =
+				<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins =
+				<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led1: user_led1 {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2: user_led2 {
+			rockchip,pins =
+				<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3: user_led3 {
+			rockchip,pins =
+				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4: user_led4 {
+			rockchip,pins =
+				<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led: wlan_led {
+			rockchip,pins =
+				<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led: bt_led {
+			rockchip,pins =
+				<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spi1 {
+	/* On both Low speed and High speed expansion */
+	cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+	gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+	gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-firefly-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-firefly-u-boot.dtsi
new file mode 100644
index 000000000..c58ad95d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-firefly-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-ddr3-1600.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
+
+&vdd_log {
+	regulator-init-microvolt = <950000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-firefly.dts b/roms/u-boot/arch/arm/dts/rk3399-firefly.dts
new file mode 100644
index 000000000..d63faf38c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-firefly.dts
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Firefly-RK3399 Board";
+	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm0 0 25000 0>;
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+		work-led {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy-led {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	rt5640-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rockchip,rt5640-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Mic Jack", "MICBIAS1",
+			"IN1P", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rt5640>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <430000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG2 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <0>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	rt5640: rt5640@1c {
+		compatible = "realtek,rt5640";
+		reg = <0x1c>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		realtek,in1-differential;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt5640_hpcon>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	accelerometer@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_3g_drv: pcie-3g-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rt5640 {
+		rt5640_hpcon: rt5640-hpcon {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	/* WiFi & BT combo module Ampak AP6356S */
+	bus-width = <4>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+
+	/* Power supply */
+	vqmmc-supply = &vcc1v8_s3;	/* IO line */
+	vmmc-supply = &vcc_sdio;	/* card's power */
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-gru-bob-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-gru-bob-u-boot.dtsi
new file mode 100644
index 000000000..726f396f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-gru-bob-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-gru-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-gru-bob.dts b/roms/u-boot/arch/arm/dts/rk3399-gru-bob.dts
new file mode 100644
index 000000000..e6c1c94c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-gru-bob.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Bob Rev 4+ board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3399-gru-chromebook.dtsi"
+
+/ {
+	model = "Google Bob";
+	compatible = "google,bob-rev13", "google,bob-rev12",
+		     "google,bob-rev11", "google,bob-rev10",
+		     "google,bob-rev9", "google,bob-rev8",
+		     "google,bob-rev7", "google,bob-rev6",
+		     "google,bob-rev5", "google,bob-rev4",
+		     "google,bob", "google,gru", "rockchip,rk3399";
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv101wxmn51";
+		backlight = <&backlight>;
+		power-supply = <&pp3300_disp>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l &touch_reset_l>;
+		reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ap_i2c_tp {
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_l>;
+		wakeup-source;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		spi-max-frequency = <800000>;
+	};
+};
+
+&pinctrl {
+	tpm {
+		h1_int_od_l: h1-int-od-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-gru-chromebook.dtsi b/roms/u-boot/arch/arm/dts/rk3399-gru-chromebook.dtsi
new file mode 100644
index 000000000..1384dabbd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-gru-chromebook.dtsi
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Chromebook shared properties
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include "rk3399-gru.dtsi"
+
+/ {
+	pp900_ap: pp900-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_ap";
+
+		/* EC turns on w/ pp900_ap_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* EC turns on w/ pp900_usb_en */
+	pp900_usb: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pcie_en */
+	pp900_pcie: pp900-ap {
+	};
+
+	pp3000: pp3000 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3000_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_centerlogic_pwm";
+
+		pwms = <&pwm3 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+	};
+
+	ppvar_centerlogic: ppvar-centerlogic {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_centerlogic";
+
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+
+		ctrl-supply = <&ppvar_centerlogic_pwm>;
+		ctrl-voltage-range = <799434 1049925>;
+
+		regulator-settling-time-up-us = <378>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
+
+	/* Schematics call this PPVAR even though it's fixed */
+	ppvar_logic: ppvar-logic {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_logic";
+
+		/* EC turns on w/ ppvar_logic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800_audio: pp1800-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_audio_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* gpio is shared with pp3300_wifi_bt */
+	pp1800_pcie: pp1800-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_pcie";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_pd_l>;
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		/*
+		 * Need to wait 1ms + ramp-up time before we can power on WiFi.
+		 * This has been approximated as 8ms total.
+		 */
+		regulator-enable-ramp-delay = <8000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* Always on; plain and simple */
+	pp3000_ap: pp3000_emmc: pp3000 {
+	};
+
+	pp1500_ap_io: pp1500-ap-io {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1500_ap_io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1500_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	pp3300_disp: pp3300-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_disp";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_disp_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+
+		startup-delay-us = <2000>;
+		vin-supply = <&pp3300>;
+	};
+
+	/* EC turns on w/ pp3300_usb_en_l */
+	pp3300_usb: pp3300 {
+	};
+
+	/* gpio is shared with pp1800_pcie and pinctrl is set there */
+	pp3300_wifi_bt: pp3300-wifi-bt {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wifi_bt";
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp3300>;
+	};
+
+	/*
+	 * This is a bit of a hack. The WiFi module should be reset at least
+	 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
+	 * With some stretching of the imagination, we can call the 1.8V
+	 * regulator a supply.
+	 */
+	wlan_pd_n: wlan-pd-n {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_pd_n";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_reset_l>;
+
+		enable-active-high;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp1800_pcie>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		power-supply = <&pp3300_disp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwm-delay-us = <10000>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+
+		wake_on_bt: wake-on-bt {
+			label = "Wake-on-Bluetooth";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&ppvar_bigcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_litcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_gpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&cdn_dp {
+	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
+};
+
+&edp {
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+ap_i2c_mic: &i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	headsetcodec: rt5514@57 {
+		compatible = "realtek,rt5514";
+		reg = <0x57>;
+		realtek,dmic-init-delay-ms = <20>;
+	};
+};
+
+ap_i2c_tp: &i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	/*
+	 * Note strange pullup enable.  Apparently this avoids leakage but
+	 * still allows us to get nice 4.7K pullups for high speed i2c
+	 * transfers.  Basically we want the pullup on whenever the ap is
+	 * alive, so the "en" pin just gets set to output high.
+	 */
+	pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
+};
+
+&cros_ec {
+	cros_ec_pwm: ec-pwm {
+		compatible = "google,cros-ec-pwm";
+		#pwm-cells = <1>;
+	};
+
+	usbc_extcon1: extcon1 {
+		compatible = "google,extcon-usbc-cros-ec";
+		google,usb-port-id = <1>;
+	};
+};
+
+&sound {
+	rockchip,codec = <&max98357a &headsetcodec
+			  &codec &wacky_spi_audio &cdn_dp>;
+};
+
+&spi2 {
+	wacky_spi_audio: spi2@0 {
+		compatible = "realtek,rt5514";
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_int>;
+		/* May run faster once verified. */
+		spi-max-frequency = <10000000>;
+		wakeup-source;
+	};
+};
+
+&pci_rootport {
+	mvl_wifi: wifi@0,0 {
+		compatible = "pci1b4b,2b42";
+		reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
+		       0x83010000 0x0 0x00100000 0x0 0x00100000>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_host_wake_l>;
+		wakeup-source;
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&pinctrl {
+	discrete-regulators {
+		pp1500_en: pp1500-en {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp1800_audio_en: pp1800-audio-en {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+
+		pp3000_en: pp3000-en {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp3300_disp_en: pp3300-disp-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		wlan_module_pd_l: wlan-module-pd-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+	};
+};
+
+&wifi {
+	wifi_perst_l: wifi-perst-l {
+		rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_host_wake_l: wlan-host-wake-l {
+		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-gru-kevin.dts b/roms/u-boot/arch/arm/dts/rk3399-gru-kevin.dts
new file mode 100644
index 000000000..2bbef9fcb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-gru-kevin.dts
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Kevin Rev 6+ board device tree source
+ *
+ * Copyright 2016-2017 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3399-gru-chromebook.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/*
+ * Kevin-specific things
+ *
+ * Things in this section should use names from Kevin schematic since no
+ * equivalent exists in Gru schematic.  If referring to signals that exist
+ * in Gru we use the Gru names, though.  Confusing enough for you?
+ */
+/ {
+	model = "Google Kevin";
+	compatible = "google,kevin-rev15", "google,kevin-rev14",
+		     "google,kevin-rev13", "google,kevin-rev12",
+		     "google,kevin-rev11", "google,kevin-rev10",
+		     "google,kevin-rev9", "google,kevin-rev8",
+		     "google,kevin-rev7", "google,kevin-rev6",
+		     "google,kevin", "google,gru", "rockchip,rk3399";
+
+	/* Power tree */
+
+	p3_3v_dig: p3-3v-dig {
+		compatible = "regulator-fixed";
+		regulator-name = "p3.3v_dig";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu3_pen_pwr_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "sharp,lq123p1jx31";
+		backlight = <&backlight>;
+		power-supply = <&pp3300_disp>;
+
+		panel-timing {
+			clock-frequency = <266666667>;
+			hactive = <2400>;
+			hfront-porch = <48>;
+			hback-porch = <84>;
+			hsync-len = <32>;
+			hsync-active = <0>;
+			vactive = <1600>;
+			vfront-porch = <3>;
+			vback-porch = <120>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+		};
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <25500>;
+		pulldown-ohm = <0>;
+		io-channels = <&saradc 2>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor_ppvar_litcpu: thermistor-ppvar-litcpu {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <25500>;
+		pulldown-ohm = <0>;
+		io-channels = <&saradc 3>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 1>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
+
+	pen-insert {
+		label = "Pen Insert";
+		/* Insert = low, eject = high */
+		gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		linux,code = <SW_PEN_INSERTED>;
+		linux,input-type = <EV_SW>;
+		wakeup-source;
+	};
+};
+
+&thermal_zones {
+	bigcpu_reg_thermal: bigcpu-reg-thermal {
+		polling-delay-passive = <100>; /* milliseconds */
+		polling-delay = <1000>; /* milliseconds */
+		thermal-sensors = <&thermistor_ppvar_bigcpu 0>;
+		sustainable-power = <4000>;
+
+		ppvar_bigcpu_trips: trips {
+			ppvar_bigcpu_on: ppvar-bigcpu-on {
+				temperature = <40000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_bigcpu_alert: ppvar-bigcpu-alert {
+				temperature = <50000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_bigcpu_crit: ppvar-bigcpu-crit {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <0>;	/* millicelsius */
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&ppvar_bigcpu_alert>;
+				cooling-device =
+					<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <4096>;
+			};
+			map1 {
+				trip = <&ppvar_bigcpu_alert>;
+				cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <1024>;
+			};
+		};
+	};
+
+	litcpu_reg_thermal: litcpu-reg-thermal {
+		polling-delay-passive = <100>; /* milliseconds */
+		polling-delay = <1000>; /* milliseconds */
+		thermal-sensors = <&thermistor_ppvar_litcpu 0>;
+		sustainable-power = <4000>;
+
+		ppvar_litcpu_trips: trips {
+			ppvar_litcpu_on: ppvar-litcpu-on {
+				temperature = <40000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_litcpu_alert: ppvar-litcpu-alert {
+				temperature = <50000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_litcpu_crit: ppvar-litcpu-crit {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <0>;	/* millicelsius */
+				type = "critical";
+			};
+		};
+	};
+};
+
+ap_i2c_tpm: &i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times. */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+ap_i2c_dig: &i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times. */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	digitizer: digitizer@9 {
+		/* wacom,w9013 */
+		compatible = "hid-over-i2c";
+		reg = <0x9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>;
+
+		vdd-supply = <&p3_3v_dig>;
+		post-power-on-delay-ms = <100>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x1>;
+	};
+};
+
+/* Adjustments to things in the gru baseboard */
+
+&ap_i2c_tp {
+	trackpad@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_l>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     BTN_LEFT>;
+		wakeup-source;
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ppvar_bigcpu_pwm {
+	regulator-min-microvolt = <798674>;
+	regulator-max-microvolt = <1302172>;
+};
+
+&ppvar_bigcpu {
+	regulator-min-microvolt = <798674>;
+	regulator-max-microvolt = <1302172>;
+	ctrl-voltage-range = <798674 1302172>;
+};
+
+&ppvar_litcpu_pwm {
+	regulator-min-microvolt = <799065>;
+	regulator-max-microvolt = <1303738>;
+};
+
+&ppvar_litcpu {
+	regulator-min-microvolt = <799065>;
+	regulator-max-microvolt = <1303738>;
+	ctrl-voltage-range = <799065 1303738>;
+};
+
+&ppvar_gpu_pwm {
+	regulator-min-microvolt = <785782>;
+	regulator-max-microvolt = <1217729>;
+};
+
+&ppvar_gpu {
+	regulator-min-microvolt = <785782>;
+	regulator-max-microvolt = <1217729>;
+	ctrl-voltage-range = <785782 1217729>;
+};
+
+&ppvar_centerlogic_pwm {
+	regulator-min-microvolt = <800069>;
+	regulator-max-microvolt = <1049692>;
+};
+
+&ppvar_centerlogic {
+	regulator-min-microvolt = <800069>;
+	regulator-max-microvolt = <1049692>;
+	ctrl-voltage-range = <800069 1049692>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&pp1800_ap_io>;
+};
+
+&mvl_wifi {
+	marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */
+};
+
+&pinctrl {
+	digitizer {
+		/* Has external pullup */
+		cpu1_dig_irq_l: cpu1-dig-irq-l {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* Has external pullup */
+		cpu1_dig_pdct_l: cpu1-dig-pdct-l {
+			rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	discrete-regulators {
+		cpu3_pen_pwr_en: cpu3-pen-pwr-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pen {
+		cpu1_pen_eject: cpu1-pen-eject {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-gru-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-gru-u-boot.dtsi
new file mode 100644
index 000000000..390ac2bb5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-gru-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+
+&spi_flash {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-gru.dtsi b/roms/u-boot/arch/arm/dts/rk3399-gru.dtsi
new file mode 100644
index 000000000..f9c5bb607
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-gru.dtsi
@@ -0,0 +1,823 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru (and derivatives) board device tree source
+ *
+ * Copyright 2016-2017 Google, Inc
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3399.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	/*
+	 * Power Tree
+	 *
+	 * In general an attempt is made to include all rails called out by
+	 * the schematic as long as those rails interact in some way with
+	 * the AP.  AKA:
+	 * - Rails that only connect to the EC (or devices that the EC talks to)
+	 *   are not included.
+	 * - Rails _are_ included if the rails go to the AP even if the AP
+	 *   doesn't currently care about them / they are always on.  The idea
+	 *   here is that it makes it easier to map to the schematic or extend
+	 *   later.
+	 *
+	 * If two rails are substantially the same from the AP's point of
+	 * view, though, we won't create a full fixed regulator.  We'll just
+	 * put the child rail as an alias of the parent rail.  Sometimes rails
+	 * look the same to the AP because one of these is true:
+	 * - The EC controls the enable and the EC always enables a rail as
+	 *   long as the AP is running.
+	 * - The rails are actually connected to each other by a jumper and
+	 *   the distinction is just there to add clarity/flexibility to the
+	 *   schematic.
+	 */
+
+	ppvar_sys: ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pp1200_lpddr: pp1200-lpddr {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_lpddr";
+
+		/* EC turns on w/ lpddr_pwr_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800: pp1800 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800";
+
+		/* Always on when ppvar_sys shows power good */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300: pp3300 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300";
+
+		/* Always on; plain and simple */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000: pp5000 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000";
+
+		/* EC turns on w/ pp5000_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_bigcpu_pwm";
+
+		pwms = <&pwm1 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800107>;
+		regulator-max-microvolt = <1302232>;
+	};
+
+	ppvar_bigcpu: ppvar-bigcpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_bigcpu";
+
+		regulator-min-microvolt = <800107>;
+		regulator-max-microvolt = <1302232>;
+
+		ctrl-supply = <&ppvar_bigcpu_pwm>;
+		ctrl-voltage-range = <800107 1302232>;
+
+		regulator-settling-time-up-us = <322>;
+	};
+
+	ppvar_litcpu_pwm: ppvar-litcpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_litcpu_pwm";
+
+		pwms = <&pwm2 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <797743>;
+		regulator-max-microvolt = <1307837>;
+	};
+
+	ppvar_litcpu: ppvar-litcpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_litcpu";
+
+		regulator-min-microvolt = <797743>;
+		regulator-max-microvolt = <1307837>;
+
+		ctrl-supply = <&ppvar_litcpu_pwm>;
+		ctrl-voltage-range = <797743 1307837>;
+
+		regulator-settling-time-up-us = <384>;
+	};
+
+	ppvar_gpu_pwm: ppvar-gpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_gpu_pwm";
+
+		pwms = <&pwm0 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <786384>;
+		regulator-max-microvolt = <1217747>;
+	};
+
+	ppvar_gpu: ppvar-gpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_gpu";
+
+		regulator-min-microvolt = <786384>;
+		regulator-max-microvolt = <1217747>;
+
+		ctrl-supply = <&ppvar_gpu_pwm>;
+		ctrl-voltage-range = <786384 1217747>;
+
+		regulator-settling-time-up-us = <390>;
+	};
+
+	/* EC turns on w/ pp900_ddrpll_en */
+	pp900_ddrpll: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pll_en */
+	pp900_pll: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pmu_en */
+	pp900_pmu: pp900-ap {
+	};
+
+	/* EC turns on w/ pp1800_s0_en_l */
+	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_avdd_en_l */
+	pp1800_avdd: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_lid_en_l */
+	pp1800_lid: pp1800_mic: pp1800 {
+	};
+
+	/* EC turns on w/ lpddr_pwr_en */
+	pp1800_lpddr: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_pmu_en_l */
+	pp1800_pmu: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_usb_en_l */
+	pp1800_usb: pp1800 {
+	};
+
+	pp3000_sd_slot: pp3000-sd-slot {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3000_sd_slot";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_slot_pwr_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp3000>;
+	};
+
+	/*
+	 * Technically, this is a small abuse of 'regulator-gpio'; this
+	 * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are
+	 * always on though, so it is sufficient to simply control the mux
+	 * here.
+	 */
+	ppvar_sd_card_io: ppvar-sd-card-io {
+		compatible = "regulator-gpio";
+		regulator-name = "ppvar_sd_card_io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
+
+		enable-active-high;
+		enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3000000 0x0>;
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	/* EC turns on w/ pp3300_trackpad_en_l */
+	pp3300_trackpad: pp3300-trackpad {
+	};
+
+	/* EC turns on w/ usb_a_en */
+	pp5000_usb_a_vbus: pp5000 {
+	};
+
+	ap_rtc_clk: ap-rtc-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
+	};
+
+	max98357a: max98357a {
+		compatible = "maxim,max98357a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmode_en>;
+		sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		sdmode-delay = <2>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+	};
+
+	sound: sound {
+		compatible = "rockchip,rk3399-gru-sound";
+		rockchip,cpu = <&i2s0 &i2s2>;
+	};
+};
+
+&cdn_dp {
+	status = "okay";
+};
+
+/*
+ * Set some suspend operating points to avoid OVP in suspend
+ *
+ * When we go into S3 ARM Trusted Firmware will transition our PWM regulators
+ * from wherever they're at back to the "default" operating point (whatever
+ * voltage we get when we set the PWM pins to "input").
+ *
+ * This quick transition under light load has the possibility to trigger the
+ * regulator "over voltage protection" (OVP).
+ *
+ * To make extra certain that we don't hit this OVP at suspend time, we'll
+ * transition to a voltage that's much closer to the default (~1.0 V) so that
+ * there will not be a big jump.  Technically we only need to get within 200 mV
+ * of the default voltage, but the speed here should be fast enough and we need
+ * suspend/resume to be rock solid.
+ */
+
+&cluster0_opp {
+	opp05 {
+		opp-suspend;
+	};
+};
+
+&cluster1_opp {
+	opp06 {
+		opp-suspend;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&ppvar_bigcpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&ppvar_bigcpu>;
+};
+
+&cru {
+	assigned-clocks =
+		<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+		<&cru PLL_NPLL>,
+		<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+		<&cru PCLK_PERIHP>,
+		<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+		<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+		<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+		<&cru ACLK_GIC_PRE>,
+		<&cru PCLK_DDR>;
+	assigned-clock-rates =
+		<600000000>, <800000000>,
+		<1000000000>,
+		<150000000>, <75000000>,
+		<37500000>,
+		<100000000>, <100000000>,
+		<50000000>, <800000000>,
+		<100000000>, <50000000>,
+		<400000000>, <400000000>,
+		<200000000>,
+		<200000000>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&ppvar_gpu>;
+	status = "okay";
+};
+
+ap_i2c_ts: &i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+};
+
+ap_i2c_audio: &i2c8 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	codec: da7219@1a {
+		compatible = "dlg,da7219";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		dlg,micbias-lvl = <2600>;
+		dlg,mic-amp-in-sel = "diff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&headset_int_l>;
+		VDD-supply = <&pp1800>;
+		VDDMIC-supply = <&pp3300>;
+		VDDIO-supply = <&pp1800>;
+
+		da7219_aad {
+			dlg,adc-1bit-rpt = <1>;
+			dlg,btn-avg = <4>;
+			dlg,btn-cfg = <50>;
+			dlg,mic-det-thr = <500>;
+			dlg,jack-ins-deb = <20>;
+			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-rem-deb = <1>;
+
+			dlg,a-d-btn-thr = <0xa>;
+			dlg,d-b-btn-thr = <0x16>;
+			dlg,b-c-btn-thr = <0x21>;
+			dlg,c-mic-btn-thr = <0x3E>;
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&pp1800_audio>;		/* APIO5_VDD;  3d 4a */
+	bt656-supply = <&pp1800_ap_io>;		/* APIO2_VDD;  2a 2b */
+	gpio1830-supply = <&pp3000_ap>;		/* APIO4_VDD;  4c 4d */
+	sdmmc-supply = <&ppvar_sd_card_io>;	/* SDMMC0_VDD; 4b    */
+};
+
+&pcie0 {
+	status = "okay";
+
+	ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>;
+	vpcie3v3-supply = <&pp3300_wifi_bt>;
+	vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */
+	vpcie0v9-supply = <&pp900_pcie>;
+
+	pci_rootport: pcie@0,0 {
+		reg = <0x83000000 0x0 0x00000000 0x0 0x00000000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmu1830-supply = <&pp1800_pmu>;		/* PMUIO2_VDD */
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdhci {
+	/*
+	 * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
+	 * same (or nearly the same) performance for all eMMC that are intended
+	 * to be used.
+	 */
+	assigned-clock-rates = <150000000>;
+
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+
+	/*
+	 * Note: configure "sdmmc_cd" as card detect even though it's actually
+	 * hooked to ground.  Because we specified "cd-gpios" below dw_mmc
+	 * should be ignoring card detect anyway.  Specifying the pin as
+	 * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag)
+	 * turned on that the system will still make sure the port is
+	 * configured as SDMMC and not JTAG.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio
+		     &sdmmc_bus4>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&pp3000_sd_slot>;
+	vqmmc-supply = <&ppvar_sd_card_io>;
+};
+
+&spi1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&spi1_sleep>;
+
+	spi_flash: spiflash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/* May run faster once verified. */
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_l>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbc_extcon0: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&tcphy0 {
+	status = "okay";
+	extcon = <&usbc_extcon0>;
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+	extcon = <&usbc_extcon0>;
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+#include <cros-ec-keyboard.dtsi>
+#include <cros-ec-sbs.dtsi>
+
+&pinctrl {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 *
+	 * At the moment settings are identical for S0 and S3, but if we later
+	 * need to configure things differently for S3 we'll adjust here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&ap_pwroff	/* AP will auto-assert this when in S3 */
+		&clk_32k	/* This pin is always 32k on gru boards */
+	>;
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	backlight-enable {
+		bl_en: bl-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cros-ec {
+		ec_ap_int_l: ec-ap-int-l {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	discrete-regulators {
+		sd_io_pwr_en: sd-io-pwr-en {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		sd_pwr_1800_sel: sd-pwr-1800-sel {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		sd_slot_pwr_en: sd-slot-pwr-en {
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+	};
+
+	codec {
+		/* Has external pullup */
+		headset_int_l: headset-int-l {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		mic_int: mic-int {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	max98357a {
+		sdmode_en: sdmode-en {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pcie {
+		pcie_clkreqn_cpm: pci-clkreqn-cpm {
+			/*
+			 * Since our pcie doesn't support ClockPM(CPM), we want
+			 * to hack this as gpio, so the EP could be able to
+			 * de-assert it along and make ClockPM(CPM) work.
+			 */
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * We run sdmmc at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB1 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB2 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB3 1 &pcfg_pull_none_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				<4 RK_PB4 1 &pcfg_pull_none_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				<4 RK_PB5 1 &pcfg_pull_none_8ma>;
+		};
+
+		/*
+		 * In our case the official card detect is hooked to ground
+		 * to avoid getting access to JTAG just by sticking something
+		 * in the SD card slot (see the force_jtag bit in the TRM).
+		 *
+		 * We still configure it as card detect because it doesn't
+		 * hurt and dw_mmc will ignore it.  We make sure to disable
+		 * the pull though so we don't burn needless power.
+		 */
+		sdmmc_cd: sdmmc-cd {
+			rockchip,pins =
+				<0 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/* This is where we actually hook up CD; has external pull */
+		sdmmc_cd_gpio: sdmmc-cd-gpio {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	spi1 {
+		spi1_sleep: spi1-sleep {
+			/*
+			 * Pull down SPI1 CLK/CS/RX/TX during suspend, to
+			 * prevent leakage.
+			 */
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	touchscreen {
+		touch_int_l: touch-int-l {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		touch_reset_l: touch-reset-l {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	trackpad {
+		ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		trackpad_int_l: trackpad-int-l {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi: wifi {
+		wlan_module_reset_l: wlan-module-reset-l {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			/* Kevin has an external pull up, but Gru does not */
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	write-protect {
+		ap_fw_wp: ap-fw-wp {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-captain-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-captain-u-boot.dtsi
new file mode 100644
index 000000000..ca1bbffb5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-captain-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Nick Xie <nick@khadas.com>
+ */
+
+#include "rk3399-khadas-edge-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-captain.dts b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-captain.dts
new file mode 100644
index 000000000..8302e51de
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-captain.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge-Captain";
+	compatible = "khadas,edge-captain", "rockchip,rk3399";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
new file mode 100644
index 000000000..a7039d74a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Nick Xie <nick@khadas.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
+
+&vdd_log {
+	regulator-init-microvolt = <950000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi
new file mode 100644
index 000000000..ca1bbffb5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Nick Xie <nick@khadas.com>
+ */
+
+#include "rk3399-khadas-edge-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-v.dts b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-v.dts
new file mode 100644
index 000000000..f5dcb99dc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge-v.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge-V";
+	compatible = "khadas,edge-v", "rockchip,rk3399";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-khadas-edge.dts b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge.dts
new file mode 100644
index 000000000..31616e7ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge";
+	compatible = "khadas,edge", "rockchip,rk3399";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-khadas-edge.dtsi b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge.dtsi
new file mode 100644
index 000000000..e87a04477
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-khadas-edge.dtsi
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vsys_5v0>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vsys_3v3>;
+	};
+
+	vsys: vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: vsys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys>;
+	};
+
+	vsys_5v0: vsys-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vsys>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
+
+		sys-led {
+			label = "sys_led";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led {
+			label = "user_led";
+			default-state = "off";
+			gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 150 200 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vsys_5v0>;
+		pwms = <&pwm0 0 40000 0>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&gpu_thermal {
+	trips {
+		gpu_warm: gpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		gpu_hot: gpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&gpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map2 {
+			trip = <&gpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vsys_3v3>;
+		vcc2-supply = <&vsys_3v3>;
+		vcc3-supply = <&vsys_3v3>;
+		vcc4-supply = <&vsys_3v3>;
+		vcc6-supply = <&vsys_3v3>;
+		vcc7-supply = <&vsys_3v3>;
+		vcc8-supply = <&vsys_3v3>;
+		vcc9-supply = <&vsys_3v3>;
+		vcc10-supply = <&vsys_3v3>;
+		vcc11-supply = <&vsys_3v3>;
+		vcc12-supply = <&vsys_3v3>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_apio2: LDO_REG1 {
+				regulator-name = "vcc1v8_apio2";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_vldo2: LDO_REG2 {
+				regulator-name = "vcc_vldo2";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_vldo5: LDO_REG5 {
+				regulator-name = "vcc_vldo5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc1v8_codec: LDO_REG7 {
+				regulator-name = "vcc1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_apio2>;
+	audio-supply = <&vcc1v8_codec>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sys_led_gpio: sys_led-gpio {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led_gpio: user_led-gpio {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	/* WiFi & BT combo module Ampak AP6356S */
+	bus-width = <4>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc1v8_s3>;
+	vmmc-supply = <&vccio_sd>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+		vbat-supply = <&vsys_3v3>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
new file mode 100644
index 000000000..c638ce259
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
+
+&vdd_log {
+	regulator-init-microvolt = <950000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-leez-p710.dts b/roms/u-boot/arch/arm/dts/rk3399-leez-p710.dts
new file mode 100644
index 000000000..73be38a53
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-leez-p710.dts
@@ -0,0 +1,645 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Leez RK3399 P710";
+	compatible = "leez,p710", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	dc5v_adp: dc5v-adp {
+		compatible = "regulator-fixed";
+		regulator-name = "dc5v_adapter";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_lan: vcc3v3-lan {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vim-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host3: vcc5v0-host3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host3";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host3_en>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc5v_adp>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	bt {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host3_en: vcc5v0-host3-en {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host0>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host1>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
new file mode 100644
index 000000000..17201bcf4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopc-t4.dts b/roms/u-boot/arch/arm/dts/rk3399-nanopc-t4.dts
new file mode 100644
index 000000000..e0d75617b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPC-T4";
+	compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
+	vcc12v0_sys: vcc12v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "vcc12v0_sys";
+	};
+
+	vcc5v0_host0: vcc5v0-host0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc5v0_host0";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		/*
+		 * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
+		 * work out to 0, ~1200, ~3000, and 5000RPM respectively.
+		 */
+		cooling-levels = <0 12 18 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&pcie0 {
+	num-lanes = <4>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+};
+
+&pinctrl {
+	ir {
+		ir_rx: ir-rx {
+			/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
+			rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host0>;
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host0>;
+};
+
+&vcc5v0_sys {
+	vin-supply = <&vcc12v0_sys>;
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc12v0_sys>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-2gb-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-2gb-u-boot.dtsi
new file mode 100644
index 000000000..a2f978647
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-2gb-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ * Copyright (C) 2020 Deepak Das <deepakdas.linux@gmail.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-ddr3-1866.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-2gb.dts b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
new file mode 100644
index 000000000..60358ab8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi M4";
+	compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_core: vcc5v0-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_core";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+
+	vcc5v0_usb1: vcc5v0-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2: vcc5v0-usb2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb2";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_usb2>;
+};
+
+&vbus_typec {
+	regulator-always-on;
+	vin-supply = <&vdd_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
new file mode 100644
index 000000000..17201bcf4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4.dts b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4.dts
new file mode 100644
index 000000000..60358ab8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi M4";
+	compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_core: vcc5v0-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_core";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+
+	vcc5v0_usb1: vcc5v0-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2: vcc5v0-usb2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb2";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_usb2>;
+};
+
+&vbus_typec {
+	regulator-always-on;
+	vin-supply = <&vdd_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4b-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4b-u-boot.dtsi
new file mode 100644
index 000000000..9c3c1ef81
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4b-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Alexandre Vicenzi <linux@alxd.me>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-ddr3-1866.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4b.dts b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4b.dts
new file mode 100644
index 000000000..72182c58c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-m4b.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4B board device tree source
+ *
+ * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi-m4.dts"
+
+/ {
+	model = "FriendlyElec NanoPi M4B";
+	compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+};
+
+/* No USB type-C PD power manager */
+/delete-node/ &fusb0;
+
+&i2c4 {
+	status = "disabled";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb2>;
+};
+
+&u2phy0_otg {
+	phy-supply = <&vbus_typec>;
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
new file mode 100644
index 000000000..eb0aca475
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-ddr3-1866.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-neo4.dts b/roms/u-boot/arch/arm/dts/rk3399-nanopi-neo4.dts
new file mode 100644
index 000000000..195410b08
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-neo4.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi NEO4";
+	compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_core: vcc5v0-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_core";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+
+	vcc5v0_usb1: vcc5v0-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+	regulator-always-on;
+	vin-supply = <&vdd_5v>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
new file mode 100644
index 000000000..cd1642527
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi-r4s.dts b/roms/u-boot/arch/arm/dts/rk3399-nanopi-r4s.dts
new file mode 100644
index 000000000..6f2cf17bf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R4S";
+	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+	aliases {
+		ethernet1 = &r8169;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 12 18 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vdd_5v>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "disabled";
+};
+
+&fusb0 {
+	status = "disabled";
+};
+
+&leds {
+	lan_led: led-1 {
+		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:lan";
+	};
+
+	wan_led: led-2 {
+		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:wan";
+	};
+};
+
+&leds_gpio {
+	rockchip,pins =
+		<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&pcie0 {
+	max-link-speed = <1>;
+	num-lanes = <1>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+
+	pcie@0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		r8169: pcie@0,0 {
+			reg = <0x000000 0 0 0 0>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&sdhci {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&sdmmc {
+	host-index-min = <1>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+	status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
new file mode 100644
index 000000000..a9d10592d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+
+/{
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
+
+&sdmmc {
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-nanopi4.dtsi b/roms/u-boot/arch/arm/dts/rk3399-nanopi4.dtsi
new file mode 100644
index 000000000..c88018a0e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_sys";
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys";
+		vin-supply = <&vdd_5v>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc1v8_s3";
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/*
+	 * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+	 * drives the enable pin, but we can't quite model that.
+	 */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		regulator-name = "vcca0v9_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	/* As above, actually supplied by vcc3v3_sys */
+	vcca1v8_s3: vcca1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcca1v8_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	vbus_typec: vbus-typec {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vbus_typec";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_gpio>;
+
+		status {
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			label = "status_led";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc3v3_s3>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-name = "vdd_cpu_b";
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-name = "vdd_gpu";
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		clock-output-names = "xin32k", "rtc_clko_wifi";
+		#clock-cells = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_center";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_cpu_l";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_cam: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_cam";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc3v0_touch";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_pmupll";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-init-microvolt = <3000000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sdio";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcca3v0_codec";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc_1v5";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_codec";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc_3v0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_s3";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <200000>;
+	i2c-scl-rising-time-ns = <150>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vbus_typec>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc_1v8>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pcie_phy {
+	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
+	assigned-clock-rates = <100000000>;
+	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <2>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&pinctrl {
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		leds_gpio: leds-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	phy {
+		phy_intb: phy-intb {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rstb: phy-rstb {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		power_key: power-key {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio {
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			/* external pullup to VCC1V8_PMUPLL */
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_reg_on_h: wifi-reg_on-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc0_det_l: sdmmc0-det-l {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm2_pin_pull_down>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-op1-opp.dtsi b/roms/u-boot/arch/arm/dts/rk3399-op1-opp.dtsi
new file mode 100644
index 000000000..69cc9b05b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-op1-opp.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	cluster0_opp: opp-table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <900000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	cluster1_opp: opp-table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <850000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <900000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <975000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <1250000>;
+		};
+	};
+
+	gpu_opp_table: opp-table2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <800000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <850000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1075000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-opp.dtsi b/roms/u-boot/arch/arm/dts/rk3399-opp.dtsi
new file mode 100644
index 000000000..d6f1095ab
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-opp.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	cluster0_opp: opp-table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cluster1_opp: opp-table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <875000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <950000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1200000>;
+		};
+	};
+
+	gpu_opp_table: opp-table2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <800000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <875000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-orangepi-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
new file mode 100644
index 000000000..d4327ea60
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-ddr3-1333.dtsi"
+
+&vdd_log {
+	regulator-init-microvolt = <950000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-orangepi.dts b/roms/u-boot/arch/arm/dts/rk3399-orangepi.dts
new file mode 100644
index 000000000..f9f7246d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-orangepi.dts
@@ -0,0 +1,828 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Orange Pi RK3399 Board";
+	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			press-threshold-microvolt = <985000>;
+		};
+
+		menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <1314000>;
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_btn>;
+			wakeup-source;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vbus_typec: vbus-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vbus_typec";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_s3>;
+	phy-mode = "rgmii";
+	phy-handle = <&rtl8211e>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	ak09911@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+		vdd-supply = <&vcc3v3_s3>;
+		vid-supply = <&vcc3v3_s3>;
+	};
+
+	mpu6500@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int_l>;
+		vddio-supply = <&vcc3v3_s3>;
+	};
+
+	lsm6ds3@6a {
+		compatible = "st,lsm6ds3";
+		reg = <0x6a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gyr_int_l>;
+		vdd-supply = <&vcc3v3_s3>;
+		vddio-supply = <&vcc3v3_s3>;
+	};
+
+	cm32181@10 {
+		compatible = "capella,cm32181";
+		reg = <0x10>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&light_int_l>;
+		vdd-supply = <&vcc3v3_s3>;
+	};
+
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&chg_cc_int_l>;
+		vbus-supply = <&vbus_typec>;
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcc_3v0>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	buttons {
+		pwr_btn: pwr-btn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	phy {
+		phy_intb: phy-intb {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rstb: phy-rstb {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_typec_en: vcc5v0-typec-en {
+			rockchip,pins =
+				<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	bluetooth {
+		bt_reg_on_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mpu6500 {
+		gsensor_int_l: gsensor-int-l {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lsm6ds3 {
+		gyr_int_l: gyr-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cm32181 {
+		light_int_l: light-int-l {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb302 {
+		chg_cc_int_l: chg-cc-int-l {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	clock-frequency = <50000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	clock-frequency = <150000000>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
new file mode 100644
index 000000000..2d87bea93
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &spiflash, &sdmmc;
+	};
+
+	config {
+		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
+	};
+};
+
+&edp {
+	rockchip,panel = <&edp_panel>;
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&rk808 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci {
+	max-frequency = <25000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	max-frequency = <20000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&spiflash {
+	u-boot,dm-pre-reloc;
+};
+
+&vdd_log {
+	regulator-init-microvolt = <950000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-pinebook-pro.dts b/roms/u-boot/arch/arm/dts/rk3399-pinebook-pro.dts
new file mode 100644
index 000000000..294d21bf4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-pinebook-pro.dts
@@ -0,0 +1,1096 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Pine64 Pinebook Pro";
+	compatible = "pine64,pinebook-pro", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: edp-backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_12v>;
+		pwms = <&pwm0 0 740740 0>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv140fhmn49";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_gpio>;
+		power-supply = <&vcc3v3_panel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				panel_in_edp: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * Use separate nodes for gpio-keys to allow for selective deactivation
+	 * of wakeup sources via sysfs without disabling the whole key
+	 */
+	gpio-key-lid {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lidbtn_gpio>;
+
+		lid {
+			debounce-interval = <20>;
+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "Lid";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-key-power {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn_gpio>;
+
+		power {
+			debounce-interval = <20>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
+
+		green-led {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+			label = "green:power";
+		};
+
+		red-led {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STANDBY;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "red:standby";
+			panic-indicator;
+			retain-state-suspended;
+		};
+	};
+
+	/* Power sequence for SDIO WiFi module */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_gpio>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <500000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Audio components */
+	es8316-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_gpio>;
+		simple-audio-card,name = "rockchip,es8316-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker Amplifier INL", "HPOL",
+			"Speaker Amplifier INR", "HPOR",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR";
+
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,aux-devs = <&speaker_amp>;
+		simple-audio-card,pin-switches = "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8316>;
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&pa_5v>;
+	};
+
+	/* Power tree */
+	/* Root power source */
+	vcc_sysin: vcc-sysin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sysin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Regulators supplied by vcc_sysin */
+	/* LCD backlight supply */
+	vcc_12v: vcc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Main 3.3 V supply */
+	vcc3v3_sys: wifi_bat: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* 5 V USB power supply */
+	vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_5v_gpio>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* RK3399 logic supply */
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc3v3_sys */
+	/* 0.9 V supply, always on */
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* S3 1.8 V supply, switched by vcc1v8_s3 */
+	vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* LCD panel power, called VCC3V3_S0 in schematic */
+	vcc3v3_panel: vcc3v3-panel {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdvcc_en_gpio>;
+		regulator-name = "vcc3v3_panel";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <100000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* M.2 adapter power, switched by vcc1v8_s3 */
+	vcc3v3_ssd: vcc3v3-ssd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ssd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* USB 3 port power supply regulator  */
+	vcc5v0_otg: vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en_gpio>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* Type C port power supply regulator */
+	vbus_5vout: vbus_typec: vbus-5vout {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+		regulator-name = "vbus_5vout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc_1v8 */
+	/* Primary 0.9 V LDO */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v9_s3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	mains_charger: dc-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+
+		/* Also triggered by USB charger */
+		pinctrl-names = "default";
+		pinctrl-0 = <&dc_det_gpio>;
+	};
+};
+
+&cdn_dp {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&edp {
+	force-hpd;
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l_gpio>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sysin>;
+		vcc2-supply = <&vcc_sysin>;
+		vcc3-supply = <&vcc_sysin>;
+		vcc4-supply = <&vcc_sysin>;
+		vcc6-supply = <&vcc_sysin>;
+		vcc7-supply = <&vcc_sysin>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sysin>;
+		vcc10-supply = <&vcc_sysin>;
+		vcc11-supply = <&vcc_sysin>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vcc13-supply = <&vcc_sysin>;
+		vcc14-supply = <&vcc_sysin>;
+
+		regulators {
+			/* rk3399 center logic supply */
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: vcc_wl: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* not used */
+			LDO_REG1 {
+			};
+
+			/* not used */
+			LDO_REG2 {
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	es8316: es8316@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-falling-time-ns = <15>;
+	i2c-scl-rising-time-ns = <450>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <600>;
+	status = "okay";
+
+	fusb0: fusb30x@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int_gpio>;
+		vbus-supply = <&vbus_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint =
+							<&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usbc_dp: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_dp>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2s1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+	rockchip,capture-channels = <8>;
+	rockchip,playback-channels = <8>;
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	bus-scan-delay-ms = <1000>;
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
+	vpcie3v3-supply = <&vcc3v3_ssd>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn_gpio: pwrbtn-gpio {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		lidbtn_gpio: lidbtn-gpio {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dc-charger {
+		dc_det_gpio: dc-det-gpio {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	es8316 {
+		hp_det_gpio: hp-det-gpio {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int_gpio: fusb0-int-gpio {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	i2s1 {
+		i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcdvcc_en_gpio: lcdvcc-en-gpio {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		panel_en_gpio: panel-en-gpio {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		pwrled_gpio: pwrled_gpio {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		slpled_gpio: slpled_gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l_gpio: pmic-int-l-gpio {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdcard {
+		sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h_gpio: wifi-enable-h-gpio {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		pwr_5v_gpio: pwr-5v-gpio {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_wake_gpio: bt-wake-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_gpio: bt-host-wake-gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_gpio: bt-reset-gpio {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	max-freq = <10000000>;
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_dp {
+	port {
+		tcphy0_typec_dp: endpoint {
+			remote-endpoint = <&usbc_dp>;
+		};
+	};
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&wifi_bat>;
+		vddio-supply = <&vcc_wl>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
new file mode 100644
index 000000000..e0476ab25
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk3399-u-boot.dtsi"
+
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1333
+#include "rk3399-sdram-ddr3-1333.dtsi"
+#endif
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1600
+#include "rk3399-sdram-ddr3-1600.dtsi"
+#endif
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1866
+#include "rk3399-sdram-ddr3-1866.dtsi"
+#endif
+
+/ {
+	config {
+		u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+		u-boot,mmc-env-offset = <0x4000>;      /* @  16KB */
+		u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
+		u-boot,boot-led = "module_led";
+		sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		u-boot,spl-boot-order = \
+			"same-as-spl", &norflash, &sdhci, &sdmmc;
+	};
+
+	aliases {
+		spi5 = &spi5;
+	};
+
+	/*
+	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+	 * eMMC and SPI flash powered-down initially (in fact it keeps the
+	 * reset signal asserted).  Even though it is an enable signal, we
+	 * model this as a regulator.
+	 */
+	bios_enable: bios_enable {
+		compatible = "regulator-fixed";
+		u-boot,dm-pre-reloc;
+		regulator-name = "bios_enable";
+		enable-active-high;
+		gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-init-microvolt = <950000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&norflash {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-puma-haikou.dts b/roms/u-boot/arch/arm/dts/rk3399-puma-haikou.dts
new file mode 100644
index 000000000..d80d6b726
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-puma-haikou.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3399-puma.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3399-Q7 SoM";
+	compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+
+		sd-card-led {
+			label = "sd_card_led";
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			clocks = <&sgtl5000_clk>;
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&i2s0>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator  {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <24576000>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+
+	vdda_codec: vdda-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vdda_codec>;
+		VDDD-supply = <&vddd_codec>;
+		status = "okay";
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+			  /* LID_BTN */
+			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_sd_haikou: led-sd-gpio {
+			rockchip,pins =
+			  <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+			  <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-puma.dtsi b/roms/u-boot/arch/arm/dts/rk3399-puma.dtsi
new file mode 100644
index 000000000..72c06abd2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-puma.dtsi
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_module>;
+
+		module-led {
+			label = "module_led";
+			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	/*
+	 * Overwrite the opp-table for CPUB as this board uses a different
+	 * regulator (FAN53555) that only allows 10mV steps and therefore
+	 * can't reach the operation point target voltages from rk3399-opp.dtsi
+	 */
+	/delete-node/ opp-table1;
+	cluster1_opp: opp-table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <830000>;
+			opp-suspend;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <880000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <950000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1030000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1230000>;
+			turbo-mode;
+		};
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc1v2_phy: vcc1v2-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2_phy";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+		enable-active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+	drive-impedance-ohm = <33>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc1v2_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_ldo1: LDO_REG1 {
+				regulator-name = "vcc_ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_ldo5: LDO_REG5 {
+				regulator-name = "vcc_ldo5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ldo6: LDO_REG6 {
+				regulator-name = "vcc_ldo6";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_efuse: LDO_REG8 {
+				regulator-name = "vcc_efuse";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_gpu: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1230000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	fan: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	vdd_cpu_b: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1230000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_2ch_bus>;
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+/*
+ * As Q7 does not specify neither a global nor a RX clock for I2S these
+ * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
+ * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
+ * conflicts.
+ */
+&i2s0_2ch_bus {
+	rockchip,pins =
+		<3 RK_PD0 1 &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcc_1v8>;
+	audio-supply = <&vcc_1v8>;
+	sdmmc-supply = <&vcc_sd>;
+	gpio1830-supply = <&vcc_1v8>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	i2c8 {
+		i2c8_xfer_a: i2c8-xfer {
+			rockchip,pins =
+			  <1 RK_PC4 1 &pcfg_pull_up>,
+			  <1 RK_PC5 1 &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_pin_module: led-module-gpio {
+			rockchip,pins =
+			  <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+			  <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	vqmmc-supply = <&vcc_sd>;
+};
+
+&spi1 {
+	status = "okay";
+
+	norflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-roc-pc-mezzanine-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-roc-pc-mezzanine-u-boot.dtsi
new file mode 100644
index 000000000..f50c18dd3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-roc-pc-mezzanine-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "rk3399-roc-pc-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-roc-pc-mezzanine.dts b/roms/u-boot/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
new file mode 100644
index 000000000..2acb3d500
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Mezzanine Board";
+	compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
+
+	vcc3v3_ngff: vcc3v3-ngff {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_ngff_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	vpcie1v8-supply = <&vcc1v8_pmu>;
+	vpcie0v9-supply = <&vcca_0v9>;
+	status = "okay";
+};
+
+&pinctrl {
+	ngff {
+		vcc3v3_ngff_en: vcc3v3-ngff-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		vcc3v3_pcie_en: vcc3v3-pcie-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_perst: pcie-perst {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_ngff>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
new file mode 100644
index 000000000..e3c9364e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Levin Du <djw@t-chip.com.cn>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdhci, &sdmmc;
+	};
+
+	config {
+		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
+	};
+
+	vcc_hub_en: vcc_hub_en-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hub_rst>;
+		regulator-name = "vcc_hub_en";
+		regulator-always-on;
+	};
+};
+
+/*
+ * should be placed inside mp8859, but not until mp8859 has
+ * its own dt-binding.
+ */
+&dc_12v {
+	compatible = "regulator-fixed";
+	regulator-name = "dc_12v";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <12000000>;
+	regulator-max-microvolt = <12000000>;
+	vin-supply = <&vcc_vbus_typec0>;
+};
+
+&spi1 {
+	spi_flash: flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&vdd_log {
+	regulator-min-microvolt = <430000>;
+	regulator-init-microvolt = <950000>;
+};
+
+&vcc5v0_host {
+	regulator-always-on;
+};
+
+&vcc_sys {
+	regulator-always-on;
+};
+
+&vcc_sdio {
+	regulator-always-on;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-roc-pc.dts b/roms/u-boot/arch/arm/dts/rk3399-roc-pc.dts
new file mode 100644
index 000000000..cd4195425
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-roc-pc.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-roc-pc.dtsi b/roms/u-boot/arch/arm/dts/rk3399-roc-pc.dtsi
new file mode 100644
index 000000000..9f225e9c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-roc-pc.dtsi
@@ -0,0 +1,814 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_l>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+
+		work-led {
+			label = "green:work";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		diy-led {
+			label = "red:diy";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+
+		yellow-led {
+			label = "yellow:yellow-led";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_vbus_typec0: vcc-vbus-typec0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_vbus_typec0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v0_sd_en>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcca_0v9: vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_vbus_typec1: vcc-vbus-typec1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_vbus_typec1_en>;
+		regulator-name = "vcc_vbus_typec1";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_sys_en>;
+		regulator-name = "vcc_sys";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <450000>;
+		regulator-max-microvolt = <1400000>;
+		pwm-supply = <&vcc3v3_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vcc13-supply = <&vcc3v3_sys>;
+		vcc14-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb1: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb1_int>;
+		vbus-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vcc_vbus_typec0>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <12000000>;
+			};
+		};
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		yellow_led_gpio: yellow_led-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		vcc3v0_sd_en: vcc3v0-sd-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc_sys_en: vcc-sys-en {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hub_rst: hub-rst {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb-typec {
+		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		fusb1_int: fusb1-int {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi
new file mode 100644
index 000000000..c17e769f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
+
+&vdd_log {
+	regulator-init-microvolt = <950000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4.dtsi b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4.dtsi
new file mode 100644
index 000000000..1c55a4645
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4.dtsi
@@ -0,0 +1,709 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_lan: vcc3v3-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_codec: LDO_REG1 {
+				regulator-name = "vcc1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_cam: SWITCH_REG1 {
+				regulator-name = "vcc_cam";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_mipi: SWITCH_REG2 {
+				regulator-name = "vcc_mipi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc_3v0>;
+	audio-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcc_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio0 {
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC5 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC6 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC7 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0-typec-en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4a.dts b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4a.dts
new file mode 100644
index 000000000..d96dd3ebd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4a.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4A";
+	compatible = "radxa,rockpi4", "rockchip,rk3399";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi
new file mode 100644
index 000000000..85ee5770a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-rock-pi-4-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4b.dts b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4b.dts
new file mode 100644
index 000000000..4ca970aca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4b.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4B";
+	compatible = "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi
new file mode 100644
index 000000000..85ee5770a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-rock-pi-4-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4c.dts b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4c.dts
new file mode 100644
index 000000000..9d07ebd1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock-pi-4c.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4C";
+	compatible = "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
+
+&vcc5v0_host {
+	gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host_en {
+	rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock960-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-rock960-u-boot.dtsi
new file mode 100644
index 000000000..c190089e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock960-u-boot.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-2GB-1600.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-init-microvolt = <950000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock960.dts b/roms/u-boot/arch/arm/dts/rk3399-rock960.dts
new file mode 100644
index 000000000..437a75f31
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock960.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+	model = "96boards Rock960";
+	compatible = "vamrs,rock960", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+			    <&user_led4>, <&wlan_led>, <&bt_led>;
+
+		user_led1 {
+			label = "green:user1";
+			gpios = <&gpio4 RK_PC2 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "green:user2";
+			gpios = <&gpio4 RK_PC6 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "green:user3";
+			gpios = <&gpio4 RK_PD0 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4 {
+			label = "green:user4";
+			gpios = <&gpio4 RK_PD4 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			gpios = <&gpio4 RK_PD5 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&gpio4 RK_PD6 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	leds {
+		user_led1: user_led1 {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2: user_led2 {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3: user_led3 {
+			rockchip,pins =
+				<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4: user_led4 {
+			rockchip,pins =
+				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led: wlan_led {
+			rockchip,pins =
+				<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led: bt_led {
+			rockchip,pins =
+				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins =
+				<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spi0 {
+	/* On Low speed expansion (LS-SPI0) */
+	status = "okay";
+};
+
+&spi4 {
+	/* On High speed expansion (HS-SPI1) */
+	status = "okay";
+};
+
+&thermal_zones {
+	cpu_thermal: cpu {
+		polling-delay-passive = <100>;
+		polling-delay = <1000>;
+		thermal-sensors = <&tsadc 0>;
+		sustainable-power = <1550>;
+
+		trips {
+			cpu_alert0: cpu_alert0 {
+				    temperature = <65000>;
+				    hysteresis = <2000>;
+				    type = "passive";
+			};
+
+			cpu_alert1: cpu_alert1 {
+				    temperature = <75000>;
+				    hysteresis = <2000>;
+				    type = "passive";
+			};
+
+			cpu_crit: cpu_crit {
+				  temperature = <95000>;
+				  hysteresis = <2000>;
+				  type = "critical";
+			};
+		};
+
+		cooling-maps {
+			     map0 {
+
+			     trip = <&cpu_alert1>;
+			     cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+	gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+	gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rock960.dtsi b/roms/u-boot/arch/arm/dts/rk3399-rock960.dtsi
new file mode 100644
index 000000000..ba7c75c9f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rock960.dtsi
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc1v8_s0: vcc1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_drv>;
+		regulator-boot-on;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		status = "okay";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v0_sd: LDO_REG5 {
+				regulator-name = "vcc3v0_sd";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2s2 {
+        status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+	audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+	sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+	gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB1 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB2 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB3 1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				<4 RK_PB4 1 &pcfg_pull_none_18ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				<4 RK_PB5 1 &pcfg_pull_up_8ma>;
+		};
+	};
+
+	sdio0 {
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins =
+				<2 RK_PC4 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC5 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC6 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC7 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins =
+				<2 RK_PD0 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins =
+				<2 RK_PD1 1 &pcfg_pull_none_20ma>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins =
+				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins =
+				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc_sd>;
+	card-detect-delay = <800>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	rockchip,hw-tshut-temp = <110000>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
new file mode 100644
index 000000000..37dff04ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdmmc, &sdhci;
+	};
+
+	config {
+		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
+	};
+};
+
+&spi1 {
+	spi_flash: flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&vdd_center {
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <950000>;
+};
+
+&vdd_log {
+	regulator-init-microvolt = <950000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rockpro64.dts b/roms/u-boot/arch/arm/dts/rk3399-rockpro64.dts
new file mode 100644
index 000000000..4b4271780
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rockpro64.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+	model = "Pine64 RockPro64 v2.1";
+	compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+	es8316: codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s1_p0_0>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-rockpro64.dtsi b/roms/u-boot/arch/arm/dts/rk3399-rockpro64.dtsi
new file mode 100644
index 000000000..9bca25801
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-rockpro64.dtsi
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+		work-led {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy-led {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "rockchip,rk3399";
+		dais = <&i2s1_p0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1700000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+
+	i2s1_p0: port {
+		i2s1_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie12v-supply = <&vcc12v_dcin>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_perst: pcie-perst {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1333.dtsi b/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1333.dtsi
new file mode 100644
index 000000000..7fae24953
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1333.dtsi
@@ -0,0 +1,1540 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+&dmc {
+        rockchip,sdram-params = <
+		0x1
+		0xa
+		0x3
+		0x2
+		0x1
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x80120e12
+		0x11030802
+		0x00000002
+		0x00006246
+		0x0000004c
+		0x00000000
+		0x1
+		0xa
+		0x3
+		0x2
+		0x1
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x80120e12
+		0x11030802
+		0x00000002
+		0x00006246
+		0x0000004c
+		0x00000000
+		666
+		3
+		2
+		9
+		1
+		0x00000600
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000007
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000007
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000007
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000000
+		0x00000101
+		0x00020100
+		0x000208d6
+		0x00051616
+		0x02000200
+		0x07140200
+		0x00071400
+		0x04000714
+		0x20040004
+		0x18090517
+		0x17200400
+		0x00180905
+		0x05172004
+		0x05001809
+		0x00000c04
+		0x0400b6d0
+		0x0c040505
+		0x0400b6d0
+		0x0c040505
+		0x0400b6d0
+		0x02030005
+		0x090a0900
+		0x000a090a
+		0x14000a0a
+		0x00000a0a
+		0x00010000
+		0x03131313
+		0x00090909
+		0x00000000
+		0x03010000
+		0x144800ea
+		0x144800ea
+		0x144800ea
+		0x00000000
+		0x00040004
+		0x00100004
+		0x00100010
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02000000
+		0x020000f0
+		0x020000f0
+		0x000000f0
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000301
+		0x00000001
+		0x00000000
+		0x00000000
+		0x01000000
+		0x80104002
+		0x00040003
+		0x00040005
+		0x00030000
+		0x00050004
+		0x00000004
+		0x00040003
+		0x00040005
+		0x51200000
+		0x00002890
+		0x28905120
+		0x51200000
+		0x00002890
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x07070700
+		0x00070707
+		0x00030200
+		0x00040700
+		0x00000302
+		0x02000407
+		0x00000003
+		0x00030f04
+		0x00070004
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x00010000
+		0x20040020
+		0x00200400
+		0x01000400
+		0x00000b80
+		0x00000000
+		0x00000001
+		0x00000002
+		0x0000000e
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00860000
+		0x00a70043
+		0x00a70000
+		0x00430086
+		0x000000a7
+		0x008600a7
+		0x00a70043
+		0x00a70000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00420a60
+		0x0a600010
+		0x00100042
+		0x00420a60
+		0x00000010
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00420a60
+		0x0a600010
+		0x00100042
+		0x00420a60
+		0x00000010
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000000
+		0x00000000
+		0x18151100
+		0x0000000c
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00020003
+		0x00400100
+		0x00000000
+		0x01000200
+		0x00000040
+		0x00020000
+		0x00400100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01010100
+		0x00000202
+		0x0a000001
+		0x01000f0f
+		0x00000000
+		0x00000000
+		0x00010003
+		0x00000c03
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00010000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x06060602
+		0x01000606
+		0x00000001
+		0x03030300
+		0x03080808
+		0x03050303
+		0x03050303
+		0x00050303
+		0x00020202
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0d000001
+		0x00010028
+		0x00010000
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x01000000
+		0x00000001
+		0x00000303
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x00010300
+		0x03000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00ffff00
+		0x13130000
+		0x08000013
+		0x00002890
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00002890
+		0x000195a0
+		0x28900609
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00002890
+		0x000195a0
+		0x28900609
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00002890
+		0x000195a0
+		0x02020609
+		0x03030202
+		0x00000014
+		0x00000000
+		0x00000000
+		0x00001403
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030000
+		0x00060018
+		0x00060018
+		0x00060018
+		0x00000000
+		0x00000000
+		0x01000000
+		0x01050105
+		0x00050105
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000100
+		0x01010101
+		0x01000101
+		0x01000100
+		0x00010001
+		0x00010002
+		0x00020100
+		0x00000002
+		0x00000600
+		0x00000000
+		0x00005120
+		0x00002890
+		0x00005120
+		0x00002890
+		0x00005120
+		0x28902890
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00002890
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00002890
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00010000
+		0x00000007
+		0x110f0001
+		0x3c020000
+		0x3fffffff
+		0x3c030000
+		0x1dc0ffff
+		0x3c010000
+		0x1dc0ffff
+		0x3c000000
+		0x1dc0ffff
+		0x3c300400
+		0x1dc7ffff
+		0x3c000000
+		0x00000000
+		0x3c000000
+		0x00000000
+		0x3c000000
+		0x00000000
+		0x03000101
+		0x00222222
+		0x07140007
+		0x00071400
+		0x00000014
+		0x144800ea
+		0x144800ea
+		0x144800ea
+		0x00000500
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04040000
+		0x0d000004
+		0x00000128
+		0x00000000
+		0x00030003
+		0x00000014
+		0x00000000
+		0x00000000
+		0x06060002
+		0x06010601
+		0x08060601
+		0x02020401
+		0x00080104
+		0x00000000
+		0x00000000
+		0x03030300
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030300
+		0x00000014
+		0x00000000
+		0x01010300
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000101
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x09090001
+		0x06060009
+		0x01010006
+		0x00000101
+		0x00030000
+		0x17030000
+		0x00060018
+		0x00060018
+		0x00060018
+		0x00000000
+		0x00000000
+		0x00000000
+		0x140a0000
+		0x000a000a
+		0x00000a00
+		0x010a000a
+		0x00000100
+		0x01000000
+		0x00000000
+		0x00000100
+		0x1e1a0000
+		0x10010204
+		0x07070705
+		0x20000202
+		0x00201000
+		0x00201000
+		0x04041000
+		0x0f0f0100
+		0x0001010f
+		0x004b004a
+		0x1a030000
+		0x0102041e
+		0x34000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00004200
+		0x00000010
+		0x004d4d00
+		0x00100042
+		0x4d000000
+		0x0000424d
+		0x00000010
+		0x004d4d00
+		0x00100042
+		0x4d000000
+		0x0000424d
+		0x00000010
+		0x004d4d00
+		0x00100042
+		0x4d000000
+		0x0042004d
+		0x00000010
+		0x004d4d00
+		0x00100042
+		0x4d000000
+		0x0000424d
+		0x00000010
+		0x004d4d00
+		0x00100042
+		0x4d000000
+		0x0000424d
+		0x00000010
+		0x004d4d00
+		0x00100042
+		0x4d000000
+		0x0000004d
+		0x00a700a7
+		0x050400a7
+		0x0a050909
+		0x1700b4fc
+		0x07042000
+		0x0909050c
+		0x00000a05
+		0x1700b4fc
+		0x07042000
+		0x0909050c
+		0x00000a05
+		0x1700b4fc
+		0x07042000
+		0x0200020c
+		0x02000200
+		0x02000200
+		0x02000200
+		0x02000200
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000300
+		0x00289000
+		0x000195a0
+		0x00002890
+		0x000195a0
+		0x00002890
+		0x000195a0
+		0x08000000
+		0x00000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x76543210
+		0x0004c008
+		0x00000055
+		0x00000000
+		0x00000000
+		0x00010000
+		0x0111ff11
+		0x0011ff11
+		0x00010300
+		0x05000100
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00550080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x01000080
+		0x00100000
+		0x07054208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x00000055
+		0x00000000
+		0x00000000
+		0x00010000
+		0x0111ff11
+		0x0011ff11
+		0x00010300
+		0x05000100
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00550080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x01000080
+		0x00100000
+		0x07054208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x00000055
+		0x00000000
+		0x00000000
+		0x00010000
+		0x0111ff11
+		0x0011ff11
+		0x00010300
+		0x05000100
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00550080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x01000080
+		0x00100000
+		0x07054208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x00000055
+		0x00000000
+		0x00000000
+		0x00010000
+		0x0111ff11
+		0x0011ff11
+		0x00010300
+		0x05000100
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00550080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x01000080
+		0x00100000
+		0x07054208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00dcba98
+		0x00000000
+		0x00dcba98
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x0a418820
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x16a4a0e6
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x1ee6b16a
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x01000005
+		0x04000f00
+		0x00020040
+		0x00020055
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x00000601
+		0x00000000
+		0x00006400
+		0x01221102
+		0x00000000
+		0x00031f00
+		0x031f031f
+		0x031f031f
+		0x00030003
+		0x03000300
+		0x00000300
+		0x01221102
+		0x00000000
+		0x00000000
+		0x03020000
+		0x00000001
+		0x00008011
+		0x00000011
+		0x00000440
+		0x00000040
+		0x00004011
+		0x00004011
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04000000
+		0x00000000
+		0x00000000
+		0x00000508
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0xe4000000
+		0x00000000
+		0x00000000
+		0x01010000
+		0x00000000
+	>;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1600.dtsi b/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1600.dtsi
new file mode 100644
index 000000000..23c7c34a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1600.dtsi
@@ -0,0 +1,1539 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+&dmc {
+        rockchip,sdram-params = <
+		0x1
+		0xa
+		0x3
+		0x2
+		0x1
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x80151015
+		0x14040902
+		0x00000002
+		0x00006346
+		0x0000004c
+		0x00000000
+		0x1
+		0xa
+		0x3
+		0x2
+		0x1
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x80151015
+		0x14040902
+		0x00000002
+		0x00006346
+		0x0000004c
+		0x00000000
+		800
+		3
+		2
+		9
+		1
+		0x00000600
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000008
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000008
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000008
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000000
+		0x00000101
+		0x00020100
+		0x00027100
+		0x00061a80
+		0x02000200
+		0x08160200
+		0x00081600
+		0x04000816
+		0x26050004
+		0x1c0b061c
+		0x1c260500
+		0x001c0b06
+		0x061c2605
+		0x06001c0b
+		0x00000c04
+		0x0400db60
+		0x0c040605
+		0x0400db60
+		0x0c040605
+		0x0400db60
+		0x02030005
+		0x0b0c0b00
+		0x000c0b0c
+		0x14000a0a
+		0x00000a0a
+		0x00010000
+		0x03171717
+		0x000b0b0b
+		0x00000000
+		0x03010000
+		0x18580118
+		0x18580118
+		0x18580118
+		0x00000000
+		0x00050005
+		0x00140005
+		0x00140014
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02000000
+		0x02000120
+		0x02000120
+		0x00000120
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000301
+		0x00000001
+		0x00000000
+		0x00000000
+		0x01000000
+		0x80104002
+		0x00040003
+		0x00040005
+		0x00030000
+		0x00050004
+		0x00000004
+		0x00040003
+		0x00040005
+		0x61600000
+		0x000030b0
+		0x30b06160
+		0x61600000
+		0x000030b0
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x08080800
+		0x00080808
+		0x00030200
+		0x00040700
+		0x00000302
+		0x02000407
+		0x00000003
+		0x00030f04
+		0x00070004
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x00010000
+		0x20040020
+		0x00200400
+		0x01000400
+		0x00000b80
+		0x00000000
+		0x00000001
+		0x00000002
+		0x0000000e
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00a00000
+		0x00c80050
+		0x00c80000
+		0x005000a0
+		0x000000c8
+		0x00a000c8
+		0x00c80050
+		0x00c80000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00420c70
+		0x0c700018
+		0x00180042
+		0x00420c70
+		0x00000018
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00420c70
+		0x0c700018
+		0x00180042
+		0x00420c70
+		0x00000018
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000000
+		0x00000000
+		0x18151100
+		0x0000000c
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00020003
+		0x00400100
+		0x00000000
+		0x01000200
+		0x00000040
+		0x00020000
+		0x00400100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01010100
+		0x00000202
+		0x0a000001
+		0x01000f0f
+		0x00000000
+		0x00000000
+		0x00010003
+		0x00000c03
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00010000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x07070702
+		0x01010606
+		0x00000001
+		0x03030300
+		0x03080808
+		0x03050303
+		0x03050303
+		0x00050303
+		0x00020202
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0d000001
+		0x00010028
+		0x00010000
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x01000000
+		0x00000001
+		0x00000303
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x00010300
+		0x03000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00ffff00
+		0x15150000
+		0x08000015
+		0x000030b0
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000030b0
+		0x0001e6e0
+		0x30b00709
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000030b0
+		0x0001e6e0
+		0x30b00709
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000030b0
+		0x0001e6e0
+		0x02020709
+		0x03030202
+		0x00000014
+		0x00000000
+		0x00000000
+		0x00001403
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030000
+		0x00060018
+		0x00060018
+		0x00060018
+		0x00000000
+		0x00000000
+		0x01000000
+		0x02060206
+		0x00050206
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000100
+		0x01010101
+		0x01000101
+		0x01000100
+		0x00010001
+		0x00010002
+		0x00020100
+		0x00000002
+		0x00000600
+		0x00000000
+		0x00006160
+		0x000030b0
+		0x00006160
+		0x000030b0
+		0x00006160
+		0x30b030b0
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000030b0
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000030b0
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00010000
+		0x00000007
+		0x110f0001
+		0x3c020000
+		0x3fffffff
+		0x3c030000
+		0x1dc0ffff
+		0x3c010000
+		0x1dc0ffff
+		0x3c000000
+		0x1dc0ffff
+		0x3c300400
+		0x1dc7ffff
+		0x3c000000
+		0x00000000
+		0x3c000000
+		0x00000000
+		0x3c000000
+		0x00000000
+		0x03000101
+		0x00242424
+		0x08160008
+		0x00081600
+		0x00000016
+		0x18580118
+		0x18580118
+		0x18580118
+		0x00000500
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04040000
+		0x0d000004
+		0x00000128
+		0x00000000
+		0x00030003
+		0x00000014
+		0x00000000
+		0x00000000
+		0x07060002
+		0x07010701
+		0x00060601
+		0x00020001
+		0x00080004
+		0x00000000
+		0x00000000
+		0x03030300
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030300
+		0x00000014
+		0x00000000
+		0x01010300
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000101
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x09090001
+		0x07070009
+		0x02020007
+		0x00000102
+		0x00030000
+		0x17030000
+		0x00060018
+		0x00060018
+		0x00060018
+		0x00000000
+		0x00000000
+		0x00000000
+		0x140a0000
+		0x000a000a
+		0x00000a00
+		0x010a000a
+		0x00000100
+		0x01000000
+		0x00000000
+		0x00000100
+		0x1e1a0000
+		0x10010204
+		0x07070705
+		0x20000202
+		0x00201000
+		0x00201000
+		0x04041000
+		0x10100100
+		0x00010110
+		0x004b004a
+		0x1a030000
+		0x0102041e
+		0x34000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00004200
+		0x00000018
+		0x004d4d00
+		0x00180042
+		0x4d000000
+		0x0000424d
+		0x00000018
+		0x004d4d00
+		0x00180042
+		0x4d000000
+		0x0000424d
+		0x00000018
+		0x004d4d00
+		0x00180042
+		0x4d000000
+		0x0042004d
+		0x00000018
+		0x004d4d00
+		0x00180042
+		0x4d000000
+		0x0000424d
+		0x00000018
+		0x004d4d00
+		0x00180042
+		0x4d000000
+		0x0000424d
+		0x00000018
+		0x004d4d00
+		0x00180042
+		0x4d000000
+		0x0000004d
+		0x00c800c8
+		0x060400c8
+		0x0c060b0b
+		0x1c00d92e
+		0x08042000
+		0x0b0b060c
+		0x00000c06
+		0x1c00d92e
+		0x08042000
+		0x0b0b060c
+		0x00000c06
+		0x1c00d92e
+		0x08042000
+		0x0200020c
+		0x02000200
+		0x02000200
+		0x02000200
+		0x02000200
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000300
+		0x0030b000
+		0x0001e6e0
+		0x000030b0
+		0x0001e6e0
+		0x000030b0
+		0x0001e6e0
+		0x08000000
+		0x00000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x76543210
+		0x0004c008
+		0x00000099
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00990080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x02000080
+		0x00100001
+		0x07054208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x00000099
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00990080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x02000080
+		0x00100001
+		0x07054208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x00000099
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00990080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x02000080
+		0x00100001
+		0x07054208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x00000099
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00990080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x02000080
+		0x00100001
+		0x07054208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00dcba98
+		0x00000000
+		0x00dcba98
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x0a418820
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x16a4a0e6
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x1ee6b16a
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x01000005
+		0x04000f00
+		0x00020040
+		0x00020055
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x00000601
+		0x00000000
+		0x00006400
+		0x01221102
+		0x00000000
+		0x00031f00
+		0x031f031f
+		0x031f031f
+		0x00030003
+		0x03000300
+		0x00000300
+		0x01221102
+		0x00000000
+		0x00000000
+		0x03020000
+		0x00000001
+		0x00008011
+		0x00000011
+		0x00000440
+		0x00000040
+		0x00004011
+		0x00004011
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04000000
+		0x00000000
+		0x00000000
+		0x00000508
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0xe4000000
+		0x00000000
+		0x00000000
+		0x01010000
+		0x00000000
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1866.dtsi b/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1866.dtsi
new file mode 100644
index 000000000..ea029ca90
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-sdram-ddr3-1866.dtsi
@@ -0,0 +1,1540 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+&dmc {
+        rockchip,sdram-params = <
+		0x1
+		0xa
+		0x3
+		0x2
+		0x1
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x80181219
+		0x17050a03
+		0x00000002
+		0x00006456
+		0x0000004c
+		0x00000000
+		0x1
+		0xa
+		0x3
+		0x2
+		0x1
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x80181219
+		0x17050a03
+		0x00000002
+		0x00006456
+		0x0000004c
+		0x00000000
+		933
+		3
+		2
+		9
+		1
+		0x00000600
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000000a
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000000a
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000000a
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000000
+		0x00000101
+		0x00020100
+		0x0002d976
+		0x00071fa6
+		0x02000200
+		0x091a0200
+		0x00091a00
+		0x0400091a
+		0x2c060004
+		0x210c0820
+		0x202c0600
+		0x00210c08
+		0x08202c06
+		0x0800210c
+		0x00000f04
+		0x0501000a
+		0x0f040805
+		0x0501000a
+		0x0f040805
+		0x0501000a
+		0x02030005
+		0x0c0f0c00
+		0x000f0c0f
+		0x14000a0a
+		0x00000a0a
+		0x00010000
+		0x031c1c1c
+		0x000c0c0c
+		0x00000000
+		0x03010000
+		0x1c6a0147
+		0x1c6a0147
+		0x1c6a0147
+		0x00000000
+		0x00060006
+		0x00170006
+		0x00170017
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02000000
+		0x02000151
+		0x02000151
+		0x00000151
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000301
+		0x00000001
+		0x00000000
+		0x00000000
+		0x01000000
+		0x80104002
+		0x00040003
+		0x00040005
+		0x00030000
+		0x00050004
+		0x00000004
+		0x00040003
+		0x00040005
+		0x71a80000
+		0x000038d4
+		0x38d471a8
+		0x71a80000
+		0x000038d4
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0a0a0a00
+		0x000a0a0a
+		0x00030200
+		0x00040700
+		0x00000302
+		0x02000407
+		0x00000003
+		0x00030f04
+		0x00070004
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x00010000
+		0x20040020
+		0x00200400
+		0x01000400
+		0x00000b80
+		0x00000000
+		0x00000001
+		0x00000002
+		0x0000000e
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00bb0000
+		0x00ea005e
+		0x00ea0000
+		0x005e00bb
+		0x000000ea
+		0x00bb00ea
+		0x00ea005e
+		0x00ea0000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00420014
+		0x00140020
+		0x00200042
+		0x00420014
+		0x00000020
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00420014
+		0x00140020
+		0x00200042
+		0x00420014
+		0x00000020
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000000
+		0x00000000
+		0x18151100
+		0x0000000c
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00025603
+		0x004b012b
+		0x00000000
+		0x012b0256
+		0x0000004b
+		0x00025600
+		0x004b012b
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01010100
+		0x00000202
+		0x0a000001
+		0x01000f0f
+		0x00000000
+		0x00000000
+		0x00010003
+		0x00000c03
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00010000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x08080802
+		0x01010606
+		0x00000001
+		0x04040400
+		0x03080808
+		0x03050303
+		0x03050303
+		0x00050303
+		0x00020202
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0d000001
+		0x00010028
+		0x00010000
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x01000000
+		0x00000001
+		0x00000303
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x00010300
+		0x03000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00ffff00
+		0x15150000
+		0x08000015
+		0x000038d4
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000038d4
+		0x00023848
+		0x38d4080b
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000038d4
+		0x00023848
+		0x38d4080b
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000038d4
+		0x00023848
+		0x0202080b
+		0x03030202
+		0x00000014
+		0x00000000
+		0x00000000
+		0x00001403
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030000
+		0x00060018
+		0x00060018
+		0x00060018
+		0x00000000
+		0x00000000
+		0x01000000
+		0x03080308
+		0x00050308
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000100
+		0x01010101
+		0x01000101
+		0x01000100
+		0x00010001
+		0x00010002
+		0x00020100
+		0x00000002
+		0x00000600
+		0x00000000
+		0x000071a8
+		0x000038d4
+		0x000071a8
+		0x000038d4
+		0x000071a8
+		0x38d438d4
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000038d4
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x000038d4
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00010000
+		0x00000007
+		0x110f0001
+		0x3c020000
+		0x3fffffff
+		0x3c030000
+		0x1dc0ffff
+		0x3c010000
+		0x1dc0ffff
+		0x3c000000
+		0x1dc0ffff
+		0x3c300400
+		0x1dc7ffff
+		0x3c000000
+		0x00000000
+		0x3c000000
+		0x00000000
+		0x3c000000
+		0x00000000
+		0x03000101
+		0x00262626
+		0x091a0009
+		0x00091a00
+		0x0000001a
+		0x1c6a0147
+		0x1c6a0147
+		0x1c6a0147
+		0x00000500
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04040000
+		0x0d000004
+		0x00000128
+		0x00000000
+		0x00030003
+		0x00000014
+		0x00000000
+		0x00000000
+		0x08060002
+		0x08010801
+		0x00060601
+		0x00020001
+		0x00080004
+		0x00000000
+		0x00000000
+		0x04040400
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030300
+		0x00000014
+		0x00000000
+		0x01010300
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000101
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x0b0b0001
+		0x0808000b
+		0x03030008
+		0x00000103
+		0x00030000
+		0x17030000
+		0x00060018
+		0x00060018
+		0x00060018
+		0x00000000
+		0x00000000
+		0x00000000
+		0x140a0000
+		0x000a000a
+		0x00000a00
+		0x010a000a
+		0x00000100
+		0x01000000
+		0x00000000
+		0x00000100
+		0x1e1a0000
+		0x10010204
+		0x07070705
+		0x20000202
+		0x00201000
+		0x00201000
+		0x04041000
+		0x12120100
+		0x00010112
+		0x004b004a
+		0x1a030000
+		0x0102041e
+		0x34000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00004200
+		0x00000020
+		0x004d4d00
+		0x00200042
+		0x4d000000
+		0x0000424d
+		0x00000020
+		0x004d4d00
+		0x00200042
+		0x4d000000
+		0x0000424d
+		0x00000020
+		0x004d4d00
+		0x00200042
+		0x4d000000
+		0x0042004d
+		0x00000020
+		0x004d4d00
+		0x00200042
+		0x4d000000
+		0x0000424d
+		0x00000020
+		0x004d4d00
+		0x00200042
+		0x4d000000
+		0x0000424d
+		0x00000020
+		0x004d4d00
+		0x00200042
+		0x4d000000
+		0x0000004d
+		0x00ea00ea
+		0x080400ea
+		0x0f080c0c
+		0x2000fd7a
+		0x0a042000
+		0x0c0c080f
+		0x00000f08
+		0x2000fd7a
+		0x0a042000
+		0x0c0c080f
+		0x00000f08
+		0x2000fd7a
+		0x0a042000
+		0x0200020f
+		0x02000200
+		0x02000200
+		0x02000200
+		0x02000200
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000300
+		0x0038d400
+		0x00023848
+		0x000038d4
+		0x00023848
+		0x000038d4
+		0x00023848
+		0x08000000
+		0x00000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x76543210
+		0x0004c008
+		0x000000de
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x06010200
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00de0080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x02000080
+		0x00100001
+		0x07064208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000de
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x06010200
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00de0080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x02000080
+		0x00100001
+		0x07064208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000de
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x06010200
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00de0080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x02000080
+		0x00100001
+		0x07064208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000de
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x06010200
+		0x00000001
+		0x001700c0
+		0x00cc0001
+		0x00000066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00de0080
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51313152
+		0x80013130
+		0x02000080
+		0x00100001
+		0x07064208
+		0x000f0c0f
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00dcba98
+		0x00000000
+		0x00dcba98
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x0a418820
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x16a4a0e6
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x1ee6b16a
+		0x103f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x00000300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x01000005
+		0x04000f00
+		0x00020040
+		0x00020055
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x00000601
+		0x00000000
+		0x00006400
+		0x01221102
+		0x00000000
+		0x00031f00
+		0x031f031f
+		0x031f031f
+		0x00030003
+		0x03000300
+		0x00000300
+		0x01221102
+		0x00000000
+		0x00000000
+		0x04020000
+		0x00000001
+		0x00008011
+		0x00000011
+		0x00000440
+		0x00000040
+		0x00004011
+		0x00004011
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00004011
+		0x00004410
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04000000
+		0x00000000
+		0x00000000
+		0x00000508
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0xe4000000
+		0x00000000
+		0x00000000
+		0x01010000
+		0x00000000
+	>;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-2GB-1600.dtsi b/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-2GB-1600.dtsi
new file mode 100644
index 000000000..7296dbb80
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-2GB-1600.dtsi
@@ -0,0 +1,1540 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+&dmc {
+	rockchip,sdram-params = <
+		0x1
+		0xa
+		0x3
+		0x2
+		0x2
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x1d191519
+		0x14040808
+		0x00000002
+		0x00006226
+		0x00000054
+		0x00000000
+		0x1
+		0xa
+		0x3
+		0x2
+		0x2
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x1d191519
+		0x14040808
+		0x00000002
+		0x00006226
+		0x00000054
+		0x00000000
+		800
+		6
+		2
+		9
+		1
+		0x00000700
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000050
+		0x00027100
+		0x00000320
+		0x00001f40
+		0x00000050
+		0x00027100
+		0x00000320
+		0x00001f40
+		0x00000050
+		0x00027100
+		0x00000320
+		0x01001f40
+		0x00000000
+		0x00000101
+		0x00020100
+		0x000000a0
+		0x00000190
+		0x00000000
+		0x06180000
+		0x00061800
+		0x04000618
+		0x33080004
+		0x280f0622
+		0x22330800
+		0x00280f06
+		0x06223308
+		0x0600280f
+		0x00000a0a
+		0x0600dac0
+		0x0a0a060c
+		0x0600dac0
+		0x0a0a060c
+		0x0600dac0
+		0x0203000c
+		0x0f0c0f00
+		0x040c0f0c
+		0x14000a0a
+		0x03030a0a
+		0x00010003
+		0x031b1b1b
+		0x00111111
+		0x00000000
+		0x03010000
+		0x0c2800a8
+		0x0c2800a8
+		0x0c2800a8
+		0x00000000
+		0x00060006
+		0x00140006
+		0x00140014
+		0x000f0f0f
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00b00000
+		0x00b000b0
+		0x00b000b0
+		0x000000b0
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000301
+		0x00000001
+		0x00000000
+		0x00000000
+		0x01000000
+		0x80104002
+		0x00040003
+		0x00040005
+		0x00030000
+		0x00050004
+		0x00000004
+		0x00040003
+		0x00040005
+		0x30a00000
+		0x00001850
+		0x185030a0
+		0x30a00000
+		0x00001850
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02020200
+		0x00020202
+		0x00030200
+		0x00040700
+		0x00000302
+		0x02000407
+		0x00000003
+		0x00030f04
+		0x00070004
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x20040020
+		0x00200400
+		0x01000400
+		0x00000b80
+		0x00000000
+		0x00000001
+		0x00000002
+		0x0000000e
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00a00000
+		0x00c80050
+		0x00c80000
+		0x005000a0
+		0x000000c8
+		0x00a000c8
+		0x00c80050
+		0x00c80000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00430000
+		0x0000001a
+		0x001a0043
+		0x00430000
+		0x0000001a
+		0x00010001
+		0x07000001
+		0x00000707
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00430000
+		0x0000001a
+		0x001a0043
+		0x00430000
+		0x0000001a
+		0x00010001
+		0x07000001
+		0x00000707
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000000
+		0x00000000
+		0x18151100
+		0x0000000c
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00032003
+		0x00480120
+		0x00000000
+		0x01200320
+		0x00000048
+		0x00032000
+		0x00480120
+		0x00000000
+		0x00280000
+		0x00280028
+		0x01010100
+		0x01000202
+		0x0a000002
+		0x01000f0f
+		0x00000000
+		0x00000000
+		0x00010003
+		0x00000c03
+		0x00000100
+		0x00010000
+		0x01000000
+		0x00010000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x03030301
+		0x01010808
+		0x03030001
+		0x0a0a0a03
+		0x02080808
+		0x02050103
+		0x02050103
+		0x00050103
+		0x00020202
+		0x05020500
+		0x00020502
+		0x00000000
+		0x00000000
+		0x0d000001
+		0x00010028
+		0x00010000
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x01000000
+		0x00000001
+		0x00000303
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x00010300
+		0x03000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00ffff00
+		0x1e1e0000
+		0x0800001e
+		0x00001850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x0000f320
+		0x1850050a
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x0000f320
+		0x1850050a
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x0000f320
+		0x0202050a
+		0x03030202
+		0x00000018
+		0x00000000
+		0x00000000
+		0x00001403
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030000
+		0x000e0020
+		0x000e0020
+		0x000e0020
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00070007
+		0x00050007
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000101
+		0x01010101
+		0x01000101
+		0x01000100
+		0x00010001
+		0x00010002
+		0x00020100
+		0x00000002
+		0x00000700
+		0x00000000
+		0x000030a0
+		0x00001850
+		0x000030a0
+		0x00001850
+		0x000030a0
+		0x18501850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00010000
+		0x00000007
+		0x81000001
+		0x0f0003f0
+		0x3fffffff
+		0x0f0000a0
+		0x377ff000
+		0x0f000020
+		0x377ff000
+		0x0f000030
+		0x377ff000
+		0x0f0000b0
+		0x377ff000
+		0x0f000100
+		0x377ff000
+		0x0f000110
+		0x377ff000
+		0x0f000010
+		0x377ff000
+		0x03000101
+		0x042e2e2e
+		0x06180006
+		0x00061800
+		0x00000018
+		0x0c2800a8
+		0x0c2800a8
+		0x0c2800a8
+		0x00000500
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04040000
+		0x0d000004
+		0x00000128
+		0x00000000
+		0x00030003
+		0x00000018
+		0x00000000
+		0x00000000
+		0x03060002
+		0x03010301
+		0x01080801
+		0x04020201
+		0x01080804
+		0x00000000
+		0x03030000
+		0x0a0a0a03
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030300
+		0x00000014
+		0x00000000
+		0x01010300
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000101
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x0a0a0001
+		0x0505000a
+		0x00000005
+		0x00000100
+		0x00030000
+		0x17030000
+		0x000e0020
+		0x000e0020
+		0x000e0020
+		0x00000000
+		0x00000000
+		0x00000100
+		0x140a0000
+		0x000a030a
+		0x03000a03
+		0x010a000a
+		0x00000100
+		0x01000000
+		0x00000000
+		0x00000100
+		0x1e1a0000
+		0x10010204
+		0x07070705
+		0x20000202
+		0x00201000
+		0x00201000
+		0x04041000
+		0x10100100
+		0x00010110
+		0x004b004a
+		0x1a030000
+		0x0102041e
+		0x34000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00004300
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0000434d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0000434d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0043004d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0000434d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0000434d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0100004d
+		0x00c800c8
+		0x060400c8
+		0x0c060f11
+		0x2200d890
+		0x0a0c2005
+		0x0f11060a
+		0x00000c06
+		0x2200d890
+		0x0a0c2005
+		0x0f11060a
+		0x00000c06
+		0x2200d890
+		0x0a0c2005
+		0x0200020a
+		0x02000200
+		0x02000200
+		0x02000200
+		0x02000200
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000300
+		0x00185000
+		0x0000f320
+		0x00001850
+		0x0000f320
+		0x00001850
+		0x0000f320
+		0x08000000
+		0x00000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000002
+		0x76543210
+		0x0004c008
+		0x000000b3
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000003
+		0x001700c0
+		0x00cc0101
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02700270
+		0x02700270
+		0x02700270
+		0x02700270
+		0x00000270
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00b30080
+		0x00000003
+		0x00000000
+		0x00020000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0013150
+		0x020000c0
+		0x00100001
+		0x07054208
+		0x000f0c18
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000b3
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000003
+		0x001700c0
+		0x00cc0101
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02700270
+		0x02700270
+		0x02700270
+		0x02700270
+		0x00000270
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00b30080
+		0x00000003
+		0x00000000
+		0x00020000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0013150
+		0x020000c0
+		0x00100001
+		0x07054208
+		0x000f0c18
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000b3
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000003
+		0x001700c0
+		0x00cc0101
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02700270
+		0x02700270
+		0x02700270
+		0x02700270
+		0x00000270
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00b30080
+		0x00000003
+		0x00000000
+		0x00020000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0013150
+		0x020000c0
+		0x00100001
+		0x07054208
+		0x000f0c18
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000b3
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000003
+		0x001700c0
+		0x00cc0101
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02700270
+		0x02700270
+		0x02700270
+		0x02700270
+		0x00000270
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00b30080
+		0x00000003
+		0x00000000
+		0x00020000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0013150
+		0x020000c0
+		0x00100001
+		0x07054208
+		0x000f0c18
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00806420
+		0x00917531
+		0x00806420
+		0x01917531
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x0a418820
+		0x103f0000
+		0x0000003f
+		0x00038055
+		0x03800380
+		0x03800380
+		0x00000380
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00008eca
+		0x00009fdb
+		0x00008eca
+		0x01009fdb
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x0004a0e6
+		0x080f0000
+		0x0000000f
+		0x00038055
+		0x03800380
+		0x03800380
+		0x00000380
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00008eca
+		0x00009fdb
+		0x00008eca
+		0x01009fdb
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x1ee6b16a
+		0x10000000
+		0x00000000
+		0x00038055
+		0x03800380
+		0x03800380
+		0x00000380
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x01000005
+		0x04000f00
+		0x00020040
+		0x00020055
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000050
+		0x00000000
+		0x00010100
+		0x00000601
+		0x00000000
+		0x00006400
+		0x01221102
+		0x00000000
+		0x00051f00
+		0x051f051f
+		0x051f051f
+		0x00030003
+		0x03000300
+		0x00000300
+		0x01221102
+		0x00000000
+		0x00000000
+		0x03020000
+		0x00000001
+		0x00000011
+		0x00000011
+		0x00000400
+		0x00000000
+		0x00000011
+		0x00000011
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00000011
+		0x00004410
+		0x00000011
+		0x00004410
+		0x00000011
+		0x00004410
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04000000
+		0x00000000
+		0x00000000
+		0x00000508
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0xe4000000
+		0x00000000
+		0x00000000
+		0x01010000
+		0x00000000
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1600.dtsi b/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1600.dtsi
new file mode 100644
index 000000000..bf429c21e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1600.dtsi
@@ -0,0 +1,1539 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+&dmc {
+	rockchip,sdram-params = <
+		0x2
+		0xa
+		0x3
+		0x2
+		0x2
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x1d191519
+		0x14040808
+		0x00000002
+		0x00006226
+		0x00000054
+		0x00000000
+		0x2
+		0xa
+		0x3
+		0x2
+		0x2
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x1d191519
+		0x14040808
+		0x00000002
+		0x00006226
+		0x00000054
+		0x00000000
+		800
+		6
+		2
+		13
+		1
+		0x00000700
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000050
+		0x00027100
+		0x00000320
+		0x00001f40
+		0x00000050
+		0x00027100
+		0x00000320
+		0x00001f40
+		0x00000050
+		0x00027100
+		0x00000320
+		0x01001f40
+		0x00000000
+		0x00000101
+		0x00020100
+		0x000000a0
+		0x00000190
+		0x00000000
+		0x06180000
+		0x00061800
+		0x04000618
+		0x33080004
+		0x280f0622
+		0x22330800
+		0x00280f06
+		0x06223308
+		0x0600280f
+		0x00000a0a
+		0x0600dac0
+		0x0a0a060c
+		0x0600dac0
+		0x0a0a060c
+		0x0600dac0
+		0x0203000c
+		0x0f0c0f00
+		0x040c0f0c
+		0x14000a0a
+		0x03030a0a
+		0x00010003
+		0x031b1b1b
+		0x00111111
+		0x00000000
+		0x03010000
+		0x0c2800a8
+		0x0c2800a8
+		0x0c2800a8
+		0x00000000
+		0x00060006
+		0x00140006
+		0x00140014
+		0x000f0f0f
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00b00000
+		0x00b000b0
+		0x00b000b0
+		0x000000b0
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000301
+		0x00000001
+		0x00000000
+		0x00000000
+		0x01000000
+		0x80104002
+		0x00040003
+		0x00040005
+		0x00030000
+		0x00050004
+		0x00000004
+		0x00040003
+		0x00040005
+		0x30a00000
+		0x00001850
+		0x185030a0
+		0x30a00000
+		0x00001850
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02020200
+		0x00020202
+		0x00030200
+		0x00040700
+		0x00000302
+		0x02000407
+		0x00000003
+		0x00030f04
+		0x00070004
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x20040020
+		0x00200400
+		0x01000400
+		0x00000b80
+		0x00000000
+		0x00000001
+		0x00000002
+		0x0000000e
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00a00000
+		0x00c80050
+		0x00c80000
+		0x005000a0
+		0x000000c8
+		0x00a000c8
+		0x00c80050
+		0x00c80000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00430000
+		0x0000001a
+		0x001a0043
+		0x00430000
+		0x0000001a
+		0x00010001
+		0x07000001
+		0x00000707
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00430000
+		0x0000001a
+		0x001a0043
+		0x00430000
+		0x0000001a
+		0x00010001
+		0x07000001
+		0x00000707
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000000
+		0x00000000
+		0x18151100
+		0x0000000c
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00032003
+		0x00480120
+		0x00000000
+		0x01200320
+		0x00000048
+		0x00032000
+		0x00480120
+		0x00000000
+		0x00280000
+		0x00280028
+		0x01010100
+		0x01000202
+		0x0a000002
+		0x01000f0f
+		0x00000000
+		0x00000000
+		0x00010003
+		0x00000c03
+		0x00000100
+		0x00010000
+		0x01000000
+		0x00010000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x03030301
+		0x01010808
+		0x03030001
+		0x0a0a0a03
+		0x02080808
+		0x02050103
+		0x02050103
+		0x00050103
+		0x00020202
+		0x05020500
+		0x00020502
+		0x00000000
+		0x00000000
+		0x0d000001
+		0x00010028
+		0x00010000
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x01000000
+		0x00000001
+		0x00000303
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x00010300
+		0x03000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00ffff00
+		0x1e1e0000
+		0x0800001e
+		0x00001850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x0000f320
+		0x1850050a
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x0000f320
+		0x1850050a
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x0000f320
+		0x0202050a
+		0x03030202
+		0x00000018
+		0x00000000
+		0x00000000
+		0x00001403
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030000
+		0x000e0020
+		0x000e0020
+		0x000e0020
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00070007
+		0x00050007
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000101
+		0x01010101
+		0x01000101
+		0x01000100
+		0x00010001
+		0x00010002
+		0x00020100
+		0x00000002
+		0x00000700
+		0x00000000
+		0x000030a0
+		0x00001850
+		0x000030a0
+		0x00001850
+		0x000030a0
+		0x18501850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00010000
+		0x00000007
+		0x81000001
+		0x0f0003f0
+		0x3fffffff
+		0x0f0000a0
+		0x377ff000
+		0x0f000020
+		0x377ff000
+		0x0f000030
+		0x377ff000
+		0x0f0000b0
+		0x377ff000
+		0x0f000100
+		0x377ff000
+		0x0f000110
+		0x377ff000
+		0x0f000010
+		0x377ff000
+		0x03000101
+		0x042e2e2e
+		0x06180006
+		0x00061800
+		0x00000018
+		0x0c2800a8
+		0x0c2800a8
+		0x0c2800a8
+		0x00000500
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04040000
+		0x0d000004
+		0x00000128
+		0x00000000
+		0x00030003
+		0x00000018
+		0x00000000
+		0x00000000
+		0x03060002
+		0x03010301
+		0x01080801
+		0x04020201
+		0x01080804
+		0x00000000
+		0x03030000
+		0x0a0a0a03
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030300
+		0x00000014
+		0x00000000
+		0x01010300
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000101
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x0a0a0001
+		0x0505000a
+		0x00000005
+		0x00000100
+		0x00030000
+		0x17030000
+		0x000e0020
+		0x000e0020
+		0x000e0020
+		0x00000000
+		0x00000000
+		0x00000100
+		0x140a0000
+		0x000a030a
+		0x03000a03
+		0x010a000a
+		0x00000100
+		0x01000000
+		0x00000000
+		0x00000100
+		0x1e1a0000
+		0x10010204
+		0x07070705
+		0x20000202
+		0x00201000
+		0x00201000
+		0x04041000
+		0x10100100
+		0x00010110
+		0x004b004a
+		0x1a030000
+		0x0102041e
+		0x34000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00004300
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0000434d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0000434d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0043004d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0000434d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0000434d
+		0x0001001a
+		0x004d4d07
+		0x001a0043
+		0x4d070001
+		0x0100004d
+		0x00c800c8
+		0x060400c8
+		0x0c060f11
+		0x2200d890
+		0x0a0c2005
+		0x0f11060a
+		0x00000c06
+		0x2200d890
+		0x0a0c2005
+		0x0f11060a
+		0x00000c06
+		0x2200d890
+		0x0a0c2005
+		0x0200020a
+		0x02000200
+		0x02000200
+		0x02000200
+		0x02000200
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000300
+		0x00185000
+		0x0000f320
+		0x00001850
+		0x0000f320
+		0x00001850
+		0x0000f320
+		0x08000000
+		0x00000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000002
+		0x76543210
+		0x0004c008
+		0x000000b3
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000003
+		0x001700c0
+		0x00cc0101
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02700270
+		0x02700270
+		0x02700270
+		0x02700270
+		0x00000270
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00b30080
+		0x00000003
+		0x00000000
+		0x00020000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0013150
+		0x020000c0
+		0x00100001
+		0x07054208
+		0x000f0c18
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000b3
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000003
+		0x001700c0
+		0x00cc0101
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02700270
+		0x02700270
+		0x02700270
+		0x02700270
+		0x00000270
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00b30080
+		0x00000003
+		0x00000000
+		0x00020000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0013150
+		0x020000c0
+		0x00100001
+		0x07054208
+		0x000f0c18
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000b3
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000003
+		0x001700c0
+		0x00cc0101
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02700270
+		0x02700270
+		0x02700270
+		0x02700270
+		0x00000270
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00b30080
+		0x00000003
+		0x00000000
+		0x00020000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0013150
+		0x020000c0
+		0x00100001
+		0x07054208
+		0x000f0c18
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004c008
+		0x000000b3
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x00665555
+		0x00010f00
+		0x05010200
+		0x00000003
+		0x001700c0
+		0x00cc0101
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x08000000
+		0x0c00c007
+		0x00000100
+		0x00000100
+		0x55555555
+		0xaaaaaaaa
+		0x55555555
+		0xaaaaaaaa
+		0x00005555
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02700270
+		0x02700270
+		0x02700270
+		0x02700270
+		0x00000270
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00b30080
+		0x00000003
+		0x00000000
+		0x00020000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0013150
+		0x020000c0
+		0x00100001
+		0x07054208
+		0x000f0c18
+		0x01000140
+		0x00000c20
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00806420
+		0x00917531
+		0x00806420
+		0x01917531
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x0a418820
+		0x103f0000
+		0x0000003f
+		0x00038055
+		0x03800380
+		0x03800380
+		0x00000380
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00008eca
+		0x00009fdb
+		0x00008eca
+		0x01009fdb
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x0004a0e6
+		0x080f0000
+		0x0000000f
+		0x00038055
+		0x03800380
+		0x03800380
+		0x00000380
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00008eca
+		0x00009fdb
+		0x00008eca
+		0x01009fdb
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x1ee6b16a
+		0x10000000
+		0x00000000
+		0x00038055
+		0x03800380
+		0x03800380
+		0x00000380
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x01000005
+		0x04000f00
+		0x00020040
+		0x00020055
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000050
+		0x00000000
+		0x00010100
+		0x00000601
+		0x00000000
+		0x00006400
+		0x01221102
+		0x00000000
+		0x00051f00
+		0x051f051f
+		0x051f051f
+		0x00030003
+		0x03000300
+		0x00000300
+		0x01221102
+		0x00000000
+		0x00000000
+		0x03020000
+		0x00000001
+		0x00000011
+		0x00000011
+		0x00000400
+		0x00000000
+		0x00000011
+		0x00000011
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00000011
+		0x00004410
+		0x00000011
+		0x00004410
+		0x00000011
+		0x00004410
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04000000
+		0x00000000
+		0x00000000
+		0x00000508
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0xe4000000
+		0x00000000
+		0x00000000
+		0x01010000
+		0x00000000
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi b/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi
new file mode 100644
index 000000000..96f459fd0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi
@@ -0,0 +1,1546 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+&dmc {
+	rockchip,sdram-params = <
+		0x2
+		0xa
+		0x3
+		0x2
+		0x2
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+
+		0x801d181e
+		0x17050a08
+		0x00000002
+		0x00006426
+		0x0000004c
+		0x00000000
+
+		0x2
+		0xa
+		0x3
+		0x2
+		0x2
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+
+		0x801d181e
+		0x17050a08
+		0x00000002
+		0x00006426
+		0x0000004c
+		0x00000000
+
+		933
+		6	/* LPDDR3 */
+		2
+		13
+		1
+
+		0x00000700	/* DENALI_CTL_00_DATA */
+		0x00000000	/* DENALI_CTL_01_DATA */
+		0x00000000	/* DENALI_CTL_02_DATA */
+		0x00000000	/* DENALI_CTL_03_DATA */
+		0x00000000	/* DENALI_CTL_04_DATA */
+		0x0000005e	/* DENALI_CTL_05_DATA */
+		0x0002d976	/* DENALI_CTL_06_DATA */
+		0x000003a6	/* DENALI_CTL_07_DATA */
+		0x0000247a	/* DENALI_CTL_08_DATA */
+		0x0000005e	/* DENALI_CTL_09_DATA */
+		0x0002d976	/* DENALI_CTL_10_DATA */
+		0x000003a6	/* DENALI_CTL_11_DATA */
+		0x0000247a	/* DENALI_CTL_12_DATA */
+		0x0000005e	/* DENALI_CTL_13_DATA */
+		0x0002d976	/* DENALI_CTL_14_DATA */
+		0x000003a6	/* DENALI_CTL_15_DATA */
+		0x0100247a	/* DENALI_CTL_16_DATA */
+		0x00000000	/* DENALI_CTL_17_DATA */
+		0x00000101	/* DENALI_CTL_18_DATA */
+		0x00020100	/* DENALI_CTL_19_DATA */
+		0x000000bb	/* DENALI_CTL_20_DATA */
+		0x000001d3	/* DENALI_CTL_21_DATA */
+		0x00000000	/* DENALI_CTL_22_DATA */
+		0x081c0000	/* DENALI_CTL_23_DATA */
+		0x00081c00	/* DENALI_CTL_24_DATA */
+		0x0400081c	/* DENALI_CTL_25_DATA */
+		0x3b0a0004	/* DENALI_CTL_26_DATA */
+		0x2f110828	/* DENALI_CTL_27_DATA */
+		0x283b0a00	/* DENALI_CTL_28_DATA */
+		0x002f1108	/* DENALI_CTL_29_DATA */
+		0x08283b0a	/* DENALI_CTL_30_DATA */
+		0x08002f11	/* DENALI_CTL_31_DATA */
+		0x00000a0a	/* DENALI_CTL_32_DATA */
+		0x0800ff4f	/* DENALI_CTL_33_DATA */
+		0x0a0a080f	/* DENALI_CTL_34_DATA */
+		0x0800ff4f	/* DENALI_CTL_35_DATA */
+		0x0a0a080f	/* DENALI_CTL_36_DATA */
+		0x0800ff4f	/* DENALI_CTL_37_DATA */
+		0x0203000f	/* DENALI_CTL_38_DATA */
+		0x110f1100	/* DENALI_CTL_39_DATA */
+		0x040f110f	/* DENALI_CTL_40_DATA */
+		0x14000a0a	/* DENALI_CTL_41_DATA */
+		0x03030a0a	/* DENALI_CTL_42_DATA */
+		0x00010003	/* DENALI_CTL_43_DATA */
+		0x03212121	/* DENALI_CTL_44_DATA */
+		0x00141414	/* DENALI_CTL_45_DATA */
+		0x00000000	/* DENALI_CTL_46_DATA */
+		0x03010000	/* DENALI_CTL_47_DATA */
+		0x0e3100c5	/* DENALI_CTL_48_DATA */
+		0x0e3100c5	/* DENALI_CTL_49_DATA */
+		0x0e3100c5	/* DENALI_CTL_50_DATA */
+		0x00000000	/* DENALI_CTL_51_DATA */
+		0x00080008	/* DENALI_CTL_52_DATA */
+		0x00170008	/* DENALI_CTL_53_DATA */
+		0x00170017	/* DENALI_CTL_54_DATA */
+		0x00111111	/* DENALI_CTL_55_DATA */
+		0x00000000	/* DENALI_CTL_56_DATA */
+		0x00000000	/* DENALI_CTL_57_DATA */
+		0x00000000	/* DENALI_CTL_58_DATA */
+		0x00ce0000	/* DENALI_CTL_59_DATA */
+		0x00ce00ce	/* DENALI_CTL_60_DATA */
+		0x00ce00ce	/* DENALI_CTL_61_DATA */
+		0x000000ce	/* DENALI_CTL_62_DATA */
+		0x00000000	/* DENALI_CTL_63_DATA */
+		0x00000000	/* DENALI_CTL_64_DATA */
+		0x00000000	/* DENALI_CTL_65_DATA */
+		0x00000000	/* DENALI_CTL_66_DATA */
+		0x00000000	/* DENALI_CTL_67_DATA */
+		0x00000000	/* DENALI_CTL_68_DATA */
+		0x00000301	/* DENALI_CTL_69_DATA */
+		0x00000001	/* DENALI_CTL_70_DATA */
+		0x00000000	/* DENALI_CTL_71_DATA */
+		0x00000000	/* DENALI_CTL_72_DATA */
+		0x01000000	/* DENALI_CTL_73_DATA */
+		0x80104002	/* DENALI_CTL_74_DATA */
+		0x00040003	/* DENALI_CTL_75_DATA */
+		0x00040005	/* DENALI_CTL_76_DATA */
+		0x00030000	/* DENALI_CTL_77_DATA */
+		0x00050004	/* DENALI_CTL_78_DATA */
+		0x00000004	/* DENALI_CTL_79_DATA */
+		0x00040003	/* DENALI_CTL_80_DATA */
+		0x00040005	/* DENALI_CTL_81_DATA */
+		0x38c40000	/* DENALI_CTL_82_DATA */
+		0x00001c62	/* DENALI_CTL_83_DATA */
+		0x1c6238c4	/* DENALI_CTL_84_DATA */
+		0x38c40000	/* DENALI_CTL_85_DATA */
+		0x00001c62	/* DENALI_CTL_86_DATA */
+		0x00000000	/* DENALI_CTL_87_DATA */
+		0x00000000	/* DENALI_CTL_88_DATA */
+		0x00000000	/* DENALI_CTL_89_DATA */
+		0x00000000	/* DENALI_CTL_90_DATA */
+		0x00000000	/* DENALI_CTL_91_DATA */
+		0x02020200	/* DENALI_CTL_92_DATA */
+		0x00020202	/* DENALI_CTL_93_DATA */
+		0x00030200	/* DENALI_CTL_94_DATA */
+		0x00040700	/* DENALI_CTL_95_DATA */
+		0x00000302	/* DENALI_CTL_96_DATA */
+		0x02000407	/* DENALI_CTL_97_DATA */
+		0x00000003	/* DENALI_CTL_98_DATA */
+		0x00030f04	/* DENALI_CTL_99_DATA */
+		0x00070004	/* DENALI_CTL_100_DATA */
+		0x00000000	/* DENALI_CTL_101_DATA */
+		0x00000000	/* DENALI_CTL_102_DATA */
+		0x00000000	/* DENALI_CTL_103_DATA */
+		0x00000000	/* DENALI_CTL_104_DATA */
+		0x00000000	/* DENALI_CTL_105_DATA */
+		0x00000000	/* DENALI_CTL_106_DATA */
+		0x00000000	/* DENALI_CTL_107_DATA */
+		0x00010000	/* DENALI_CTL_108_DATA */
+		0x20040020	/* DENALI_CTL_109_DATA */
+		0x00200400	/* DENALI_CTL_110_DATA */
+		0x01000400	/* DENALI_CTL_111_DATA */
+		0x00000b80	/* DENALI_CTL_112_DATA */
+		0x00000000	/* DENALI_CTL_113_DATA */
+		0x00000001	/* DENALI_CTL_114_DATA */
+		0x00000002	/* DENALI_CTL_115_DATA */
+		0x0000000e	/* DENALI_CTL_116_DATA */
+		0x00000000	/* DENALI_CTL_117_DATA */
+		0x00000000	/* DENALI_CTL_118_DATA */
+		0x00000000	/* DENALI_CTL_119_DATA */
+		0x00000000	/* DENALI_CTL_120_DATA */
+		0x00000000	/* DENALI_CTL_121_DATA */
+		0x00bb0000	/* DENALI_CTL_122_DATA */
+		0x00ea005e	/* DENALI_CTL_123_DATA */
+		0x00ea0000	/* DENALI_CTL_124_DATA */
+		0x005e00bb	/* DENALI_CTL_125_DATA */
+		0x000000ea	/* DENALI_CTL_126_DATA */
+		0x00bb00ea	/* DENALI_CTL_127_DATA */
+		0x00ea005e	/* DENALI_CTL_128_DATA */
+		0x00ea0000	/* DENALI_CTL_129_DATA */
+		0x00000000	/* DENALI_CTL_130_DATA */
+		0x00000000	/* DENALI_CTL_131_DATA */
+		0x00000000	/* DENALI_CTL_132_DATA */
+		0x00c30000	/* DENALI_CTL_133_DATA */
+		0x0000001c	/* DENALI_CTL_134_DATA */
+		0x001c00c3	/* DENALI_CTL_135_DATA */
+		0x00c30000	/* DENALI_CTL_136_DATA */
+		0x0000001c	/* DENALI_CTL_137_DATA */
+		0x00010001	/* DENALI_CTL_138_DATA */
+		0x06000001	/* DENALI_CTL_139_DATA */
+		0x00000606	/* DENALI_CTL_140_DATA */
+		0x00000000	/* DENALI_CTL_141_DATA */
+		0x00000000	/* DENALI_CTL_142_DATA */
+		0x00000000	/* DENALI_CTL_143_DATA */
+		0x00000000	/* DENALI_CTL_144_DATA */
+		0x00000000	/* DENALI_CTL_145_DATA */
+		0x00000000	/* DENALI_CTL_146_DATA */
+		0x00c30000	/* DENALI_CTL_147_DATA */
+		0x0000001c	/* DENALI_CTL_148_DATA */
+		0x001c00c3	/* DENALI_CTL_149_DATA */
+		0x00c30000	/* DENALI_CTL_150_DATA */
+		0x0000001c	/* DENALI_CTL_151_DATA */
+		0x00010001	/* DENALI_CTL_152_DATA */
+		0x06000001	/* DENALI_CTL_153_DATA */
+		0x00000606	/* DENALI_CTL_154_DATA */
+		0x00000000	/* DENALI_CTL_155_DATA */
+		0x00000000	/* DENALI_CTL_156_DATA */
+		0x00000000	/* DENALI_CTL_157_DATA */
+		0x00000000	/* DENALI_CTL_158_DATA */
+		0x00000000	/* DENALI_CTL_159_DATA */
+		0x00000000	/* DENALI_CTL_160_DATA */
+		0x01000000	/* DENALI_CTL_161_DATA */
+		0x00000000	/* DENALI_CTL_162_DATA */
+		0x00000000	/* DENALI_CTL_163_DATA */
+		0x18151100	/* DENALI_CTL_164_DATA */
+		0x0000000c	/* DENALI_CTL_165_DATA */
+		0x00000000	/* DENALI_CTL_166_DATA */
+		0x00000000	/* DENALI_CTL_167_DATA */
+		0x00000000	/* DENALI_CTL_168_DATA */
+		0x00000000	/* DENALI_CTL_169_DATA */
+		0x00000000	/* DENALI_CTL_170_DATA */
+		0x00000000	/* DENALI_CTL_171_DATA */
+		0x00000000	/* DENALI_CTL_172_DATA */
+		0x00000000	/* DENALI_CTL_173_DATA */
+		0x00000000	/* DENALI_CTL_174_DATA */
+		0x00000000	/* DENALI_CTL_175_DATA */
+		0x00000000	/* DENALI_CTL_176_DATA */
+		0x00000000	/* DENALI_CTL_177_DATA */
+		0x00000000	/* DENALI_CTL_178_DATA */
+		0x0003a603	/* DENALI_CTL_179_DATA */
+		0x00550151	/* DENALI_CTL_180_DATA */
+		0x00000000	/* DENALI_CTL_181_DATA */
+		0x015103a6	/* DENALI_CTL_182_DATA */
+		0x00000055	/* DENALI_CTL_183_DATA */
+		0x0003a600	/* DENALI_CTL_184_DATA */
+		0x00550151	/* DENALI_CTL_185_DATA */
+		0x00000000	/* DENALI_CTL_186_DATA */
+		0x002f0000	/* DENALI_CTL_187_DATA */
+		0x002f002f	/* DENALI_CTL_188_DATA */
+		0x01010100	/* DENALI_CTL_189_DATA */
+		0x01000202	/* DENALI_CTL_190_DATA */
+		0x0a000002	/* DENALI_CTL_191_DATA */
+		0x01000f0f	/* DENALI_CTL_192_DATA */
+		0x00000000	/* DENALI_CTL_193_DATA */
+		0x00000000	/* DENALI_CTL_194_DATA */
+		0x00010003	/* DENALI_CTL_195_DATA */
+		0x00000c03	/* DENALI_CTL_196_DATA */
+		0x00000100	/* DENALI_CTL_197_DATA */
+		0x00010000	/* DENALI_CTL_198_DATA */
+		0x01000000	/* DENALI_CTL_199_DATA */
+		0x00010000	/* DENALI_CTL_200_DATA */
+		0x00000001	/* DENALI_CTL_201_DATA */
+		0x00000000	/* DENALI_CTL_202_DATA */
+		0x00000000	/* DENALI_CTL_203_DATA */
+		0x00000000	/* DENALI_CTL_204_DATA */
+		0x00000000	/* DENALI_CTL_205_DATA */
+		0x00000000	/* DENALI_CTL_206_DATA */
+		0x00000000	/* DENALI_CTL_207_DATA */
+		0x00000000	/* DENALI_CTL_208_DATA */
+		0x00000000	/* DENALI_CTL_209_DATA */
+		0x00000000	/* DENALI_CTL_210_DATA */
+		0x00010000	/* DENALI_CTL_211_DATA */
+		0x04040401	/* DENALI_CTL_212_DATA */
+		0x01010808	/* DENALI_CTL_213_DATA */
+		0x04040001	/* DENALI_CTL_214_DATA */
+		0x0c0c0c04	/* DENALI_CTL_215_DATA */
+		0x08080808	/* DENALI_CTL_216_DATA */
+		0x08050103	/* DENALI_CTL_217_DATA */
+		0x02050103	/* DENALI_CTL_218_DATA */
+		0x00050103	/* DENALI_CTL_219_DATA */
+		0x00020202	/* DENALI_CTL_220_DATA */
+		0x06030600	/* DENALI_CTL_221_DATA */
+		0x00030603	/* DENALI_CTL_222_DATA */
+		0x00000000	/* DENALI_CTL_223_DATA */
+		0x00000000	/* DENALI_CTL_224_DATA */
+		0x0d000001	/* DENALI_CTL_225_DATA */
+		0x00010028	/* DENALI_CTL_226_DATA */
+		0x00010000	/* DENALI_CTL_227_DATA */
+		0x00000003	/* DENALI_CTL_228_DATA */
+		0x00000000	/* DENALI_CTL_229_DATA */
+		0x00000000	/* DENALI_CTL_230_DATA */
+		0x00000000	/* DENALI_CTL_231_DATA */
+		0x00000000	/* DENALI_CTL_232_DATA */
+		0x00000000	/* DENALI_CTL_233_DATA */
+		0x00000000	/* DENALI_CTL_234_DATA */
+		0x00000000	/* DENALI_CTL_235_DATA */
+		0x00000000	/* DENALI_CTL_236_DATA */
+		0x00010100	/* DENALI_CTL_237_DATA */
+		0x01000000	/* DENALI_CTL_238_DATA */
+		0x00000001	/* DENALI_CTL_239_DATA */
+		0x00000303	/* DENALI_CTL_240_DATA */
+		0x00000000	/* DENALI_CTL_241_DATA */
+		0x00000000	/* DENALI_CTL_242_DATA */
+		0x00000000	/* DENALI_CTL_243_DATA */
+		0x00000000	/* DENALI_CTL_244_DATA */
+		0x00000000	/* DENALI_CTL_245_DATA */
+		0x00000000	/* DENALI_CTL_246_DATA */
+		0x00000000	/* DENALI_CTL_247_DATA */
+		0x00000000	/* DENALI_CTL_248_DATA */
+		0x00000000	/* DENALI_CTL_249_DATA */
+		0x00000000	/* DENALI_CTL_250_DATA */
+		0x00000000	/* DENALI_CTL_251_DATA */
+		0x00000000	/* DENALI_CTL_252_DATA */
+		0x00000000	/* DENALI_CTL_253_DATA */
+		0x00000000	/* DENALI_CTL_254_DATA */
+		0x00000000	/* DENALI_CTL_255_DATA */
+		0x000fffff	/* DENALI_CTL_256_DATA */
+		0x00000000	/* DENALI_CTL_257_DATA */
+		0x000556aa	/* DENALI_CTL_258_DATA */
+		0x000aaaaa	/* DENALI_CTL_259_DATA */
+		0x000b3133	/* DENALI_CTL_260_DATA */
+		0x0004cd33	/* DENALI_CTL_261_DATA */
+		0x0004cecc	/* DENALI_CTL_262_DATA */
+		0x000b32cc	/* DENALI_CTL_263_DATA */
+		0x00010300	/* DENALI_CTL_264_DATA */
+		0x03000100	/* DENALI_CTL_265_DATA */
+		0x00000000	/* DENALI_CTL_266_DATA */
+		0x00000000	/* DENALI_CTL_267_DATA */
+		0x00000000	/* DENALI_CTL_268_DATA */
+		0x00000000	/* DENALI_CTL_269_DATA */
+		0x00000000	/* DENALI_CTL_270_DATA */
+		0x00000000	/* DENALI_CTL_271_DATA */
+		0x00000000	/* DENALI_CTL_272_DATA */
+		0x00000000	/* DENALI_CTL_273_DATA */
+		0x00ffff00	/* DENALI_CTL_274_DATA */
+		0x20200000	/* DENALI_CTL_275_DATA */
+		0x08000020	/* DENALI_CTL_276_DATA */
+		0x00001c62	/* DENALI_CTL_277_DATA */
+		0x00000200	/* DENALI_CTL_278_DATA */
+		0x00000200	/* DENALI_CTL_279_DATA */
+		0x00000200	/* DENALI_CTL_280_DATA */
+		0x00000200	/* DENALI_CTL_281_DATA */
+		0x00001c62	/* DENALI_CTL_282_DATA */
+		0x00011bd4	/* DENALI_CTL_283_DATA */
+		0x1c62070c	/* DENALI_CTL_284_DATA */
+		0x00000200	/* DENALI_CTL_285_DATA */
+		0x00000200	/* DENALI_CTL_286_DATA */
+		0x00000200	/* DENALI_CTL_287_DATA */
+		0x00000200	/* DENALI_CTL_288_DATA */
+		0x00001c62	/* DENALI_CTL_289_DATA */
+		0x00011bd4	/* DENALI_CTL_290_DATA */
+		0x1c62070c	/* DENALI_CTL_291_DATA */
+		0x00000200	/* DENALI_CTL_292_DATA */
+		0x00000200	/* DENALI_CTL_293_DATA */
+		0x00000200	/* DENALI_CTL_294_DATA */
+		0x00000200	/* DENALI_CTL_295_DATA */
+		0x00001c62	/* DENALI_CTL_296_DATA */
+		0x00011bd4	/* DENALI_CTL_297_DATA */
+		0x0202070c	/* DENALI_CTL_298_DATA */
+		0x03030202	/* DENALI_CTL_299_DATA */
+		0x00000018	/* DENALI_CTL_300_DATA */
+		0x00000000	/* DENALI_CTL_301_DATA */
+		0x00000000	/* DENALI_CTL_302_DATA */
+		0x00001403	/* DENALI_CTL_303_DATA */
+		0x00000000	/* DENALI_CTL_304_DATA */
+		0x00000000	/* DENALI_CTL_305_DATA */
+		0x00000000	/* DENALI_CTL_306_DATA */
+		0x00030000	/* DENALI_CTL_307_DATA */
+		0x000f0021	/* DENALI_CTL_308_DATA */
+		0x000f0021	/* DENALI_CTL_309_DATA */
+		0x000f0021	/* DENALI_CTL_310_DATA */
+		0x00000000	/* DENALI_CTL_311_DATA */
+		0x00000000	/* DENALI_CTL_312_DATA */
+		0x01000000	/* DENALI_CTL_313_DATA */
+		0x02090209	/* DENALI_CTL_314_DATA */
+		0x00050209	/* DENALI_CTL_315_DATA */
+		0x00000000	/* DENALI_CTL_316_DATA */
+		0x00000000	/* DENALI_CTL_317_DATA */
+		0x00000000	/* DENALI_CTL_318_DATA */
+		0x00000000	/* DENALI_CTL_319_DATA */
+		0x00000000	/* DENALI_CTL_320_DATA */
+		0x00000000	/* DENALI_CTL_321_DATA */
+		0x00000000	/* DENALI_CTL_322_DATA */
+		0x00000000	/* DENALI_CTL_323_DATA */
+		0x01000101	/* DENALI_CTL_324_DATA */
+		0x01010101	/* DENALI_CTL_325_DATA */
+		0x01000101	/* DENALI_CTL_326_DATA */
+		0x01000100	/* DENALI_CTL_327_DATA */
+		0x00010001	/* DENALI_CTL_328_DATA */
+		0x00010002	/* DENALI_CTL_329_DATA */
+		0x00020100	/* DENALI_CTL_330_DATA */
+		0x00000002	/* DENALI_CTL_331_DATA */
+
+		0x00000700	/* DENALI_PI_00_DATA */
+		0x00000000	/* DENALI_PI_01_DATA */
+		0x000038c4	/* DENALI_PI_02_DATA */
+		0x00001c62	/* DENALI_PI_03_DATA */
+		0x000038c4	/* DENALI_PI_04_DATA */
+		0x00001c62	/* DENALI_PI_05_DATA */
+		0x000038c4	/* DENALI_PI_06_DATA */
+		0x1c621c62	/* DENALI_PI_07_DATA */
+		0x00000200	/* DENALI_PI_08_DATA */
+		0x00000200	/* DENALI_PI_09_DATA */
+		0x00000200	/* DENALI_PI_10_DATA */
+		0x00000200	/* DENALI_PI_11_DATA */
+		0x00001c62	/* DENALI_PI_12_DATA */
+		0x00000200	/* DENALI_PI_13_DATA */
+		0x00000200	/* DENALI_PI_14_DATA */
+		0x00000200	/* DENALI_PI_15_DATA */
+		0x00000200	/* DENALI_PI_16_DATA */
+		0x00001c62	/* DENALI_PI_17_DATA */
+		0x00000200	/* DENALI_PI_18_DATA */
+		0x00000200	/* DENALI_PI_19_DATA */
+		0x00000200	/* DENALI_PI_20_DATA */
+		0x00000200	/* DENALI_PI_21_DATA */
+		0x00010000	/* DENALI_PI_22_DATA */
+		0x00000007	/* DENALI_PI_23_DATA */
+		0x81000001	/* DENALI_PI_24_DATA */
+		0x0f0003f0	/* DENALI_PI_25_DATA */
+		0x3fffffff	/* DENALI_PI_26_DATA */
+		0x0f0000a0	/* DENALI_PI_27_DATA */
+		0x377ff000	/* DENALI_PI_28_DATA */
+		0x0f000020	/* DENALI_PI_29_DATA */
+		0x377ff000	/* DENALI_PI_30_DATA */
+		0x0f000030	/* DENALI_PI_31_DATA */
+		0x377ff000	/* DENALI_PI_32_DATA */
+		0x0f0000b0	/* DENALI_PI_33_DATA */
+		0x377ff000	/* DENALI_PI_34_DATA */
+		0x0f000100	/* DENALI_PI_35_DATA */
+		0x377ff000	/* DENALI_PI_36_DATA */
+		0x0f000110	/* DENALI_PI_37_DATA */
+		0x377ff000	/* DENALI_PI_38_DATA */
+		0x0f000010	/* DENALI_PI_39_DATA */
+		0x377ff000	/* DENALI_PI_40_DATA */
+		0x03000101	/* DENALI_PI_41_DATA */
+		0x04323232	/* DENALI_PI_42_DATA */
+		0x081c0008	/* DENALI_PI_43_DATA */
+		0x00081c00	/* DENALI_PI_44_DATA */
+		0x0000001c	/* DENALI_PI_45_DATA */
+		0x0e3100c5	/* DENALI_PI_46_DATA */
+		0x0e3100c5	/* DENALI_PI_47_DATA */
+		0x0e3100c5	/* DENALI_PI_48_DATA */
+		0x00000500	/* DENALI_PI_49_DATA */
+		0x00000000	/* DENALI_PI_50_DATA */
+		0x00000000	/* DENALI_PI_51_DATA */
+		0x00000000	/* DENALI_PI_52_DATA */
+		0x00000000	/* DENALI_PI_53_DATA */
+		0x00000000	/* DENALI_PI_54_DATA */
+		0x00000000	/* DENALI_PI_55_DATA */
+		0x00000000	/* DENALI_PI_56_DATA */
+		0x00000000	/* DENALI_PI_57_DATA */
+		0x04040000	/* DENALI_PI_58_DATA */
+		0x0d000004	/* DENALI_PI_59_DATA */
+		0x00000128	/* DENALI_PI_60_DATA */
+		0x00000000	/* DENALI_PI_61_DATA */
+		0x00030003	/* DENALI_PI_62_DATA */
+		0x00000018	/* DENALI_PI_63_DATA */
+		0x00000000	/* DENALI_PI_64_DATA */
+		0x00000000	/* DENALI_PI_65_DATA */
+		0x04060002	/* DENALI_PI_66_DATA */
+		0x04010401	/* DENALI_PI_67_DATA */
+		0x00080801	/* DENALI_PI_68_DATA */
+		0x00020001	/* DENALI_PI_69_DATA */
+		0x00080004	/* DENALI_PI_70_DATA */
+		0x00000000	/* DENALI_PI_71_DATA */
+		0x04040000	/* DENALI_PI_72_DATA */
+		0x0c0c0c04	/* DENALI_PI_73_DATA */
+		0x00000000	/* DENALI_PI_74_DATA */
+		0x00000000	/* DENALI_PI_75_DATA */
+		0x00000000	/* DENALI_PI_76_DATA */
+		0x00030300	/* DENALI_PI_77_DATA */
+		0x00000014	/* DENALI_PI_78_DATA */
+		0x00000000	/* DENALI_PI_79_DATA */
+		0x01010300	/* DENALI_PI_80_DATA */
+		0x00000000	/* DENALI_PI_81_DATA */
+		0x00000000	/* DENALI_PI_82_DATA */
+		0x01000000	/* DENALI_PI_83_DATA */
+		0x00000101	/* DENALI_PI_84_DATA */
+		0x55555a5a	/* DENALI_PI_85_DATA */
+		0x55555a5a	/* DENALI_PI_86_DATA */
+		0x55555a5a	/* DENALI_PI_87_DATA */
+		0x55555a5a	/* DENALI_PI_88_DATA */
+		0x0c0c0001	/* DENALI_PI_89_DATA */
+		0x0707000c	/* DENALI_PI_90_DATA */
+		0x02020007	/* DENALI_PI_91_DATA */
+		0x00000102	/* DENALI_PI_92_DATA */
+		0x00030000	/* DENALI_PI_93_DATA */
+		0x17030000	/* DENALI_PI_94_DATA */
+		0x000f0021	/* DENALI_PI_95_DATA */
+		0x000f0021	/* DENALI_PI_96_DATA */
+		0x000f0021	/* DENALI_PI_97_DATA */
+		0x00000000	/* DENALI_PI_98_DATA */
+		0x00000000	/* DENALI_PI_99_DATA */
+		0x00000100	/* DENALI_PI_100_DATA */
+		0x140a0000	/* DENALI_PI_101_DATA */
+		0x000a030a	/* DENALI_PI_102_DATA */
+		0x03000a03	/* DENALI_PI_103_DATA */
+		0x010a000a	/* DENALI_PI_104_DATA */
+		0x00000100	/* DENALI_PI_105_DATA */
+		0x01000000	/* DENALI_PI_106_DATA */
+		0x00000000	/* DENALI_PI_107_DATA */
+		0x00000100	/* DENALI_PI_108_DATA */
+		0x1e1a0000	/* DENALI_PI_109_DATA */
+		0x10010204	/* DENALI_PI_110_DATA */
+		0x07070705	/* DENALI_PI_111_DATA */
+		0x20000202	/* DENALI_PI_112_DATA */
+		0x00201000	/* DENALI_PI_113_DATA */
+		0x00201000	/* DENALI_PI_114_DATA */
+		0x04041000	/* DENALI_PI_115_DATA */
+		0x12120100	/* DENALI_PI_116_DATA */
+		0x00010112	/* DENALI_PI_117_DATA */
+		0x004b004a	/* DENALI_PI_118_DATA */
+		0x1a030000	/* DENALI_PI_119_DATA */
+		0x0102041e	/* DENALI_PI_120_DATA */
+		0x34000000	/* DENALI_PI_121_DATA */
+		0x00000000	/* DENALI_PI_122_DATA */
+		0x00000000	/* DENALI_PI_123_DATA */
+		0x00000000	/* DENALI_PI_124_DATA */
+		0x0000c300	/* DENALI_PI_125_DATA */
+		0x0001001c	/* DENALI_PI_126_DATA */
+		0x004d4d07	/* DENALI_PI_127_DATA */
+		0x001c00c3	/* DENALI_PI_128_DATA */
+		0x4d070001	/* DENALI_PI_129_DATA */
+		0x0000c34d	/* DENALI_PI_130_DATA */
+		0x0001001c	/* DENALI_PI_131_DATA */
+		0x004d4d07	/* DENALI_PI_132_DATA */
+		0x001c00c3	/* DENALI_PI_133_DATA */
+		0x4d070001	/* DENALI_PI_134_DATA */
+		0x0000c34d	/* DENALI_PI_135_DATA */
+		0x0001001c	/* DENALI_PI_136_DATA */
+		0x004d4d07	/* DENALI_PI_137_DATA */
+		0x001c00c3	/* DENALI_PI_138_DATA */
+		0x4d070001	/* DENALI_PI_139_DATA */
+		0x00c3004d	/* DENALI_PI_140_DATA */
+		0x0001001c	/* DENALI_PI_141_DATA */
+		0x004d4d07	/* DENALI_PI_142_DATA */
+		0x001c00c3	/* DENALI_PI_143_DATA */
+		0x4d070001	/* DENALI_PI_144_DATA */
+		0x0000c34d	/* DENALI_PI_145_DATA */
+		0x0001001c	/* DENALI_PI_146_DATA */
+		0x004d4d07	/* DENALI_PI_147_DATA */
+		0x001c00c3	/* DENALI_PI_148_DATA */
+		0x4d070001	/* DENALI_PI_149_DATA */
+		0x0000c34d	/* DENALI_PI_150_DATA */
+		0x0001001c	/* DENALI_PI_151_DATA */
+		0x004d4d07	/* DENALI_PI_152_DATA */
+		0x001c00c3	/* DENALI_PI_153_DATA */
+		0x4d070001	/* DENALI_PI_154_DATA */
+		0x0100004d	/* DENALI_PI_155_DATA */
+		0x00ea00ea	/* DENALI_PI_156_DATA */
+		0x080400ea	/* DENALI_PI_157_DATA */
+		0x0f081114	/* DENALI_PI_158_DATA */
+		0x2800fcc1	/* DENALI_PI_159_DATA */
+		0x0a0e2006	/* DENALI_PI_160_DATA */
+		0x1114080a	/* DENALI_PI_161_DATA */
+		0x00000f08	/* DENALI_PI_162_DATA */
+		0x2800fcc1	/* DENALI_PI_163_DATA */
+		0x0a0e2006	/* DENALI_PI_164_DATA */
+		0x1114080a	/* DENALI_PI_165_DATA */
+		0x00000f08	/* DENALI_PI_166_DATA */
+		0x2800fcc1	/* DENALI_PI_167_DATA */
+		0x0a0e2006	/* DENALI_PI_168_DATA */
+		0x0200020a	/* DENALI_PI_169_DATA */
+		0x02000200	/* DENALI_PI_170_DATA */
+		0x02000200	/* DENALI_PI_171_DATA */
+		0x02000200	/* DENALI_PI_172_DATA */
+		0x02000200	/* DENALI_PI_173_DATA */
+		0x00000000	/* DENALI_PI_174_DATA */
+		0x00000000	/* DENALI_PI_175_DATA */
+		0x00000000	/* DENALI_PI_176_DATA */
+		0x00000000	/* DENALI_PI_177_DATA */
+		0x00000000	/* DENALI_PI_178_DATA */
+		0x00000000	/* DENALI_PI_179_DATA */
+		0x00000000	/* DENALI_PI_180_DATA */
+		0x00000000	/* DENALI_PI_181_DATA */
+		0x00000000	/* DENALI_PI_182_DATA */
+		0x00000000	/* DENALI_PI_183_DATA */
+		0x00000000	/* DENALI_PI_184_DATA */
+		0x00000000	/* DENALI_PI_185_DATA */
+		0x01000300	/* DENALI_PI_186_DATA */
+		0x001c6200	/* DENALI_PI_187_DATA */
+		0x00011bd4	/* DENALI_PI_188_DATA */
+		0x00001c62	/* DENALI_PI_189_DATA */
+		0x00011bd4	/* DENALI_PI_190_DATA */
+		0x00001c62	/* DENALI_PI_191_DATA */
+		0x00011bd4	/* DENALI_PI_192_DATA */
+		0x08000000	/* DENALI_PI_193_DATA */
+		0x00000100	/* DENALI_PI_194_DATA */
+		0x00000000	/* DENALI_PI_195_DATA */
+		0x00000000	/* DENALI_PI_196_DATA */
+		0x00000000	/* DENALI_PI_197_DATA */
+		0x00000000	/* DENALI_PI_198_DATA */
+		0x00000002	/* DENALI_PI_199_DATA */
+
+		0x76543210	/* DENALI_PHY_00_DATA */
+		0x0004c008	/* DENALI_PHY_01_DATA */
+		0x000001a2	/* DENALI_PHY_02_DATA */
+		0x00000000	/* DENALI_PHY_03_DATA */
+		0x00000000	/* DENALI_PHY_04_DATA */
+		0x00010000	/* DENALI_PHY_05_DATA */
+		0x01665555	/* DENALI_PHY_06_DATA */
+		0x00665555	/* DENALI_PHY_07_DATA */
+		0x00010f00	/* DENALI_PHY_08_DATA */
+		0x06010200	/* DENALI_PHY_09_DATA */
+		0x00000003	/* DENALI_PHY_10_DATA */
+		0x001700c0	/* DENALI_PHY_11_DATA */
+		0x00cc0101	/* DENALI_PHY_12_DATA */
+		0x00030066	/* DENALI_PHY_13_DATA */
+		0x00000000	/* DENALI_PHY_14_DATA */
+		0x00000000	/* DENALI_PHY_15_DATA */
+		0x00000000	/* DENALI_PHY_16_DATA */
+		0x00000000	/* DENALI_PHY_17_DATA */
+		0x00000000	/* DENALI_PHY_18_DATA */
+		0x00000000	/* DENALI_PHY_19_DATA */
+		0x00000000	/* DENALI_PHY_20_DATA */
+		0x00000000	/* DENALI_PHY_21_DATA */
+		0x04080000	/* DENALI_PHY_22_DATA */
+		0x04080400	/* DENALI_PHY_23_DATA */
+		0x08000000	/* DENALI_PHY_24_DATA */
+		0x0c00c007	/* DENALI_PHY_25_DATA */
+		0x00000100	/* DENALI_PHY_26_DATA */
+		0x00000100	/* DENALI_PHY_27_DATA */
+		0x55555555	/* DENALI_PHY_28_DATA */
+		0xaaaaaaaa	/* DENALI_PHY_29_DATA */
+		0x55555555	/* DENALI_PHY_30_DATA */
+		0xaaaaaaaa	/* DENALI_PHY_31_DATA */
+		0x00005555	/* DENALI_PHY_32_DATA */
+		0x00000000	/* DENALI_PHY_33_DATA */
+		0x00000000	/* DENALI_PHY_34_DATA */
+		0x00000000	/* DENALI_PHY_35_DATA */
+		0x00000000	/* DENALI_PHY_36_DATA */
+		0x00000000	/* DENALI_PHY_37_DATA */
+		0x00000000	/* DENALI_PHY_38_DATA */
+		0x00000000	/* DENALI_PHY_39_DATA */
+		0x00000000	/* DENALI_PHY_40_DATA */
+		0x00000000	/* DENALI_PHY_41_DATA */
+		0x00000000	/* DENALI_PHY_42_DATA */
+		0x00000000	/* DENALI_PHY_43_DATA */
+		0x00000000	/* DENALI_PHY_44_DATA */
+		0x00000000	/* DENALI_PHY_45_DATA */
+		0x00000000	/* DENALI_PHY_46_DATA */
+		0x00000000	/* DENALI_PHY_47_DATA */
+		0x00000000	/* DENALI_PHY_48_DATA */
+		0x00000000	/* DENALI_PHY_49_DATA */
+		0x00000000	/* DENALI_PHY_50_DATA */
+		0x00000000	/* DENALI_PHY_51_DATA */
+		0x00200000	/* DENALI_PHY_52_DATA */
+		0x00000000	/* DENALI_PHY_53_DATA */
+		0x00000000	/* DENALI_PHY_54_DATA */
+		0x00000000	/* DENALI_PHY_55_DATA */
+		0x00000000	/* DENALI_PHY_56_DATA */
+		0x00000000	/* DENALI_PHY_57_DATA */
+		0x00000000	/* DENALI_PHY_58_DATA */
+		0x02700270	/* DENALI_PHY_59_DATA */
+		0x02700270	/* DENALI_PHY_60_DATA */
+		0x02700270	/* DENALI_PHY_61_DATA */
+		0x02700270	/* DENALI_PHY_62_DATA */
+		0x00000270	/* DENALI_PHY_63_DATA */
+		0x00000000	/* DENALI_PHY_64_DATA */
+		0x00000000	/* DENALI_PHY_65_DATA */
+		0x00000000	/* DENALI_PHY_66_DATA */
+		0x00000000	/* DENALI_PHY_67_DATA */
+		0x00800000	/* DENALI_PHY_68_DATA */
+		0x00800080	/* DENALI_PHY_69_DATA */
+		0x00800080	/* DENALI_PHY_70_DATA */
+		0x00800080	/* DENALI_PHY_71_DATA */
+		0x00800080	/* DENALI_PHY_72_DATA */
+		0x00800080	/* DENALI_PHY_73_DATA */
+		0x00800080	/* DENALI_PHY_74_DATA */
+		0x00800080	/* DENALI_PHY_75_DATA */
+		0x00800080	/* DENALI_PHY_76_DATA */
+		0x01a20080	/* DENALI_PHY_77_DATA */
+		0x00000003	/* DENALI_PHY_78_DATA */
+		0x00000000	/* DENALI_PHY_79_DATA */
+		0x00030000	/* DENALI_PHY_80_DATA */
+		0x00000200	/* DENALI_PHY_81_DATA */
+		0x00000000	/* DENALI_PHY_82_DATA */
+		0x51315152	/* DENALI_PHY_83_DATA */
+		0xc0013150	/* DENALI_PHY_84_DATA */
+		0x020000c0	/* DENALI_PHY_85_DATA */
+		0x00100001	/* DENALI_PHY_86_DATA */
+		0x07064208	/* DENALI_PHY_87_DATA */
+		0x000f0c18	/* DENALI_PHY_88_DATA */
+		0x01000140	/* DENALI_PHY_89_DATA */
+		0x00000c20	/* DENALI_PHY_90_DATA */
+		0x00000000	/* DENALI_PHY_91_DATA */
+		0x00000000	/* DENALI_PHY_92_DATA */
+		0x00000000	/* DENALI_PHY_93_DATA */
+		0x00000000	/* DENALI_PHY_94_DATA */
+		0x00000000	/* DENALI_PHY_95_DATA */
+		0x00000000	/* DENALI_PHY_96_DATA */
+		0x00000000	/* DENALI_PHY_97_DATA */
+		0x00000000	/* DENALI_PHY_98_DATA */
+		0x00000000	/* DENALI_PHY_99_DATA */
+		0x00000000	/* DENALI_PHY_100_DATA */
+		0x00000000	/* DENALI_PHY_101_DATA */
+		0x00000000	/* DENALI_PHY_102_DATA */
+		0x00000000	/* DENALI_PHY_103_DATA */
+		0x00000000	/* DENALI_PHY_104_DATA */
+		0x00000000	/* DENALI_PHY_105_DATA */
+		0x00000000	/* DENALI_PHY_106_DATA */
+		0x00000000	/* DENALI_PHY_107_DATA */
+		0x00000000	/* DENALI_PHY_108_DATA */
+		0x00000000	/* DENALI_PHY_109_DATA */
+		0x00000000	/* DENALI_PHY_110_DATA */
+		0x00000000	/* DENALI_PHY_111_DATA */
+		0x00000000	/* DENALI_PHY_112_DATA */
+		0x00000000	/* DENALI_PHY_113_DATA */
+		0x00000000	/* DENALI_PHY_114_DATA */
+		0x00000000	/* DENALI_PHY_115_DATA */
+		0x00000000	/* DENALI_PHY_116_DATA */
+		0x00000000	/* DENALI_PHY_117_DATA */
+		0x00000000	/* DENALI_PHY_118_DATA */
+		0x00000000	/* DENALI_PHY_119_DATA */
+		0x00000000	/* DENALI_PHY_120_DATA */
+		0x00000000	/* DENALI_PHY_121_DATA */
+		0x00000000	/* DENALI_PHY_122_DATA */
+		0x00000000	/* DENALI_PHY_123_DATA */
+		0x00000000	/* DENALI_PHY_124_DATA */
+		0x00000000	/* DENALI_PHY_125_DATA */
+		0x00000000	/* DENALI_PHY_126_DATA */
+		0x00000000	/* DENALI_PHY_127_DATA */
+		0x76543210	/* DENALI_PHY_128_DATA */
+		0x0004c008	/* DENALI_PHY_129_DATA */
+		0x000001a2	/* DENALI_PHY_130_DATA */
+		0x00000000	/* DENALI_PHY_131_DATA */
+		0x00000000	/* DENALI_PHY_132_DATA */
+		0x00010000	/* DENALI_PHY_133_DATA */
+		0x01665555	/* DENALI_PHY_134_DATA */
+		0x00665555	/* DENALI_PHY_135_DATA */
+		0x00010f00	/* DENALI_PHY_136_DATA */
+		0x06010200	/* DENALI_PHY_137_DATA */
+		0x00000003	/* DENALI_PHY_138_DATA */
+		0x001700c0	/* DENALI_PHY_139_DATA */
+		0x00cc0101	/* DENALI_PHY_140_DATA */
+		0x00030066	/* DENALI_PHY_141_DATA */
+		0x00000000	/* DENALI_PHY_142_DATA */
+		0x00000000	/* DENALI_PHY_143_DATA */
+		0x00000000	/* DENALI_PHY_144_DATA */
+		0x00000000	/* DENALI_PHY_145_DATA */
+		0x00000000	/* DENALI_PHY_146_DATA */
+		0x00000000	/* DENALI_PHY_147_DATA */
+		0x00000000	/* DENALI_PHY_148_DATA */
+		0x00000000	/* DENALI_PHY_149_DATA */
+		0x04080000	/* DENALI_PHY_150_DATA */
+		0x04080400	/* DENALI_PHY_151_DATA */
+		0x08000000	/* DENALI_PHY_152_DATA */
+		0x0c00c007	/* DENALI_PHY_153_DATA */
+		0x00000100	/* DENALI_PHY_154_DATA */
+		0x00000100	/* DENALI_PHY_155_DATA */
+		0x55555555	/* DENALI_PHY_156_DATA */
+		0xaaaaaaaa	/* DENALI_PHY_157_DATA */
+		0x55555555	/* DENALI_PHY_158_DATA */
+		0xaaaaaaaa	/* DENALI_PHY_159_DATA */
+		0x00005555	/* DENALI_PHY_160_DATA */
+		0x00000000	/* DENALI_PHY_161_DATA */
+		0x00000000	/* DENALI_PHY_162_DATA */
+		0x00000000	/* DENALI_PHY_163_DATA */
+		0x00000000	/* DENALI_PHY_164_DATA */
+		0x00000000	/* DENALI_PHY_165_DATA */
+		0x00000000	/* DENALI_PHY_166_DATA */
+		0x00000000	/* DENALI_PHY_167_DATA */
+		0x00000000	/* DENALI_PHY_168_DATA */
+		0x00000000	/* DENALI_PHY_169_DATA */
+		0x00000000	/* DENALI_PHY_170_DATA */
+		0x00000000	/* DENALI_PHY_171_DATA */
+		0x00000000	/* DENALI_PHY_172_DATA */
+		0x00000000	/* DENALI_PHY_173_DATA */
+		0x00000000	/* DENALI_PHY_174_DATA */
+		0x00000000	/* DENALI_PHY_175_DATA */
+		0x00000000	/* DENALI_PHY_176_DATA */
+		0x00000000	/* DENALI_PHY_177_DATA */
+		0x00000000	/* DENALI_PHY_178_DATA */
+		0x00000000	/* DENALI_PHY_179_DATA */
+		0x00200000	/* DENALI_PHY_180_DATA */
+		0x00000000	/* DENALI_PHY_181_DATA */
+		0x00000000	/* DENALI_PHY_182_DATA */
+		0x00000000	/* DENALI_PHY_183_DATA */
+		0x00000000	/* DENALI_PHY_184_DATA */
+		0x00000000	/* DENALI_PHY_185_DATA */
+		0x00000000	/* DENALI_PHY_186_DATA */
+		0x02700270	/* DENALI_PHY_187_DATA */
+		0x02700270	/* DENALI_PHY_188_DATA */
+		0x02700270	/* DENALI_PHY_189_DATA */
+		0x02700270	/* DENALI_PHY_190_DATA */
+		0x00000270	/* DENALI_PHY_191_DATA */
+		0x00000000	/* DENALI_PHY_192_DATA */
+		0x00000000	/* DENALI_PHY_193_DATA */
+		0x00000000	/* DENALI_PHY_194_DATA */
+		0x00000000	/* DENALI_PHY_195_DATA */
+		0x00800000	/* DENALI_PHY_196_DATA */
+		0x00800080	/* DENALI_PHY_197_DATA */
+		0x00800080	/* DENALI_PHY_198_DATA */
+		0x00800080	/* DENALI_PHY_199_DATA */
+		0x00800080	/* DENALI_PHY_200_DATA */
+		0x00800080	/* DENALI_PHY_201_DATA */
+		0x00800080	/* DENALI_PHY_202_DATA */
+		0x00800080	/* DENALI_PHY_203_DATA */
+		0x00800080	/* DENALI_PHY_204_DATA */
+		0x01a20080	/* DENALI_PHY_205_DATA */
+		0x00000003	/* DENALI_PHY_206_DATA */
+		0x00000000	/* DENALI_PHY_207_DATA */
+		0x00030000	/* DENALI_PHY_208_DATA */
+		0x00000200	/* DENALI_PHY_209_DATA */
+		0x00000000	/* DENALI_PHY_210_DATA */
+		0x51315152	/* DENALI_PHY_211_DATA */
+		0xc0013150	/* DENALI_PHY_212_DATA */
+		0x020000c0	/* DENALI_PHY_213_DATA */
+		0x00100001	/* DENALI_PHY_214_DATA */
+		0x07064208	/* DENALI_PHY_215_DATA */
+		0x000f0c18	/* DENALI_PHY_216_DATA */
+		0x01000140	/* DENALI_PHY_217_DATA */
+		0x00000c20	/* DENALI_PHY_218_DATA */
+		0x00000000	/* DENALI_PHY_219_DATA */
+		0x00000000	/* DENALI_PHY_220_DATA */
+		0x00000000	/* DENALI_PHY_221_DATA */
+		0x00000000	/* DENALI_PHY_222_DATA */
+		0x00000000	/* DENALI_PHY_223_DATA */
+		0x00000000	/* DENALI_PHY_224_DATA */
+		0x00000000	/* DENALI_PHY_225_DATA */
+		0x00000000	/* DENALI_PHY_226_DATA */
+		0x00000000	/* DENALI_PHY_227_DATA */
+		0x00000000	/* DENALI_PHY_228_DATA */
+		0x00000000	/* DENALI_PHY_229_DATA */
+		0x00000000	/* DENALI_PHY_230_DATA */
+		0x00000000	/* DENALI_PHY_231_DATA */
+		0x00000000	/* DENALI_PHY_232_DATA */
+		0x00000000	/* DENALI_PHY_233_DATA */
+		0x00000000	/* DENALI_PHY_234_DATA */
+		0x00000000	/* DENALI_PHY_235_DATA */
+		0x00000000	/* DENALI_PHY_236_DATA */
+		0x00000000	/* DENALI_PHY_237_DATA */
+		0x00000000	/* DENALI_PHY_238_DATA */
+		0x00000000	/* DENALI_PHY_239_DATA */
+		0x00000000	/* DENALI_PHY_240_DATA */
+		0x00000000	/* DENALI_PHY_241_DATA */
+		0x00000000	/* DENALI_PHY_242_DATA */
+		0x00000000	/* DENALI_PHY_243_DATA */
+		0x00000000	/* DENALI_PHY_244_DATA */
+		0x00000000	/* DENALI_PHY_245_DATA */
+		0x00000000	/* DENALI_PHY_246_DATA */
+		0x00000000	/* DENALI_PHY_247_DATA */
+		0x00000000	/* DENALI_PHY_248_DATA */
+		0x00000000	/* DENALI_PHY_249_DATA */
+		0x00000000	/* DENALI_PHY_250_DATA */
+		0x00000000	/* DENALI_PHY_251_DATA */
+		0x00000000	/* DENALI_PHY_252_DATA */
+		0x00000000	/* DENALI_PHY_253_DATA */
+		0x00000000	/* DENALI_PHY_254_DATA */
+		0x00000000	/* DENALI_PHY_255_DATA */
+		0x76543210	/* DENALI_PHY_256_DATA */
+		0x0004c008	/* DENALI_PHY_257_DATA */
+		0x000001a2	/* DENALI_PHY_258_DATA */
+		0x00000000	/* DENALI_PHY_259_DATA */
+		0x00000000	/* DENALI_PHY_260_DATA */
+		0x00010000	/* DENALI_PHY_261_DATA */
+		0x01665555	/* DENALI_PHY_262_DATA */
+		0x00665555	/* DENALI_PHY_263_DATA */
+		0x00010f00	/* DENALI_PHY_264_DATA */
+		0x06010200	/* DENALI_PHY_265_DATA */
+		0x00000003	/* DENALI_PHY_266_DATA */
+		0x001700c0	/* DENALI_PHY_267_DATA */
+		0x00cc0101	/* DENALI_PHY_268_DATA */
+		0x00030066	/* DENALI_PHY_269_DATA */
+		0x00000000	/* DENALI_PHY_270_DATA */
+		0x00000000	/* DENALI_PHY_271_DATA */
+		0x00000000	/* DENALI_PHY_272_DATA */
+		0x00000000	/* DENALI_PHY_273_DATA */
+		0x00000000	/* DENALI_PHY_274_DATA */
+		0x00000000	/* DENALI_PHY_275_DATA */
+		0x00000000	/* DENALI_PHY_276_DATA */
+		0x00000000	/* DENALI_PHY_277_DATA */
+		0x04080000	/* DENALI_PHY_278_DATA */
+		0x04080400	/* DENALI_PHY_279_DATA */
+		0x08000000	/* DENALI_PHY_280_DATA */
+		0x0c00c007	/* DENALI_PHY_281_DATA */
+		0x00000100	/* DENALI_PHY_282_DATA */
+		0x00000100	/* DENALI_PHY_283_DATA */
+		0x55555555	/* DENALI_PHY_284_DATA */
+		0xaaaaaaaa	/* DENALI_PHY_285_DATA */
+		0x55555555	/* DENALI_PHY_286_DATA */
+		0xaaaaaaaa	/* DENALI_PHY_287_DATA */
+		0x00005555	/* DENALI_PHY_288_DATA */
+		0x00000000	/* DENALI_PHY_289_DATA */
+		0x00000000	/* DENALI_PHY_290_DATA */
+		0x00000000	/* DENALI_PHY_291_DATA */
+		0x00000000	/* DENALI_PHY_292_DATA */
+		0x00000000	/* DENALI_PHY_293_DATA */
+		0x00000000	/* DENALI_PHY_294_DATA */
+		0x00000000	/* DENALI_PHY_295_DATA */
+		0x00000000	/* DENALI_PHY_296_DATA */
+		0x00000000	/* DENALI_PHY_297_DATA */
+		0x00000000	/* DENALI_PHY_298_DATA */
+		0x00000000	/* DENALI_PHY_299_DATA */
+		0x00000000	/* DENALI_PHY_300_DATA */
+		0x00000000	/* DENALI_PHY_301_DATA */
+		0x00000000	/* DENALI_PHY_302_DATA */
+		0x00000000	/* DENALI_PHY_303_DATA */
+		0x00000000	/* DENALI_PHY_304_DATA */
+		0x00000000	/* DENALI_PHY_305_DATA */
+		0x00000000	/* DENALI_PHY_306_DATA */
+		0x00000000	/* DENALI_PHY_307_DATA */
+		0x00200000	/* DENALI_PHY_308_DATA */
+		0x00000000	/* DENALI_PHY_309_DATA */
+		0x00000000	/* DENALI_PHY_310_DATA */
+		0x00000000	/* DENALI_PHY_311_DATA */
+		0x00000000	/* DENALI_PHY_312_DATA */
+		0x00000000	/* DENALI_PHY_313_DATA */
+		0x00000000	/* DENALI_PHY_314_DATA */
+		0x02700270	/* DENALI_PHY_315_DATA */
+		0x02700270	/* DENALI_PHY_316_DATA */
+		0x02700270	/* DENALI_PHY_317_DATA */
+		0x02700270	/* DENALI_PHY_318_DATA */
+		0x00000270	/* DENALI_PHY_319_DATA */
+		0x00000000	/* DENALI_PHY_320_DATA */
+		0x00000000	/* DENALI_PHY_321_DATA */
+		0x00000000	/* DENALI_PHY_322_DATA */
+		0x00000000	/* DENALI_PHY_323_DATA */
+		0x00800000	/* DENALI_PHY_324_DATA */
+		0x00800080	/* DENALI_PHY_325_DATA */
+		0x00800080	/* DENALI_PHY_326_DATA */
+		0x00800080	/* DENALI_PHY_327_DATA */
+		0x00800080	/* DENALI_PHY_328_DATA */
+		0x00800080	/* DENALI_PHY_329_DATA */
+		0x00800080	/* DENALI_PHY_330_DATA */
+		0x00800080	/* DENALI_PHY_331_DATA */
+		0x00800080	/* DENALI_PHY_332_DATA */
+		0x01a20080	/* DENALI_PHY_333_DATA */
+		0x00000003	/* DENALI_PHY_334_DATA */
+		0x00000000	/* DENALI_PHY_335_DATA */
+		0x00030000	/* DENALI_PHY_336_DATA */
+		0x00000200	/* DENALI_PHY_337_DATA */
+		0x00000000	/* DENALI_PHY_338_DATA */
+		0x51315152	/* DENALI_PHY_339_DATA */
+		0xc0013150	/* DENALI_PHY_340_DATA */
+		0x020000c0	/* DENALI_PHY_341_DATA */
+		0x00100001	/* DENALI_PHY_342_DATA */
+		0x07064208	/* DENALI_PHY_343_DATA */
+		0x000f0c18	/* DENALI_PHY_344_DATA */
+		0x01000140	/* DENALI_PHY_345_DATA */
+		0x00000c20	/* DENALI_PHY_346_DATA */
+		0x00000000	/* DENALI_PHY_347_DATA */
+		0x00000000	/* DENALI_PHY_348_DATA */
+		0x00000000	/* DENALI_PHY_349_DATA */
+		0x00000000	/* DENALI_PHY_350_DATA */
+		0x00000000	/* DENALI_PHY_351_DATA */
+		0x00000000	/* DENALI_PHY_352_DATA */
+		0x00000000	/* DENALI_PHY_353_DATA */
+		0x00000000	/* DENALI_PHY_354_DATA */
+		0x00000000	/* DENALI_PHY_355_DATA */
+		0x00000000	/* DENALI_PHY_356_DATA */
+		0x00000000	/* DENALI_PHY_357_DATA */
+		0x00000000	/* DENALI_PHY_358_DATA */
+		0x00000000	/* DENALI_PHY_359_DATA */
+		0x00000000	/* DENALI_PHY_360_DATA */
+		0x00000000	/* DENALI_PHY_361_DATA */
+		0x00000000	/* DENALI_PHY_362_DATA */
+		0x00000000	/* DENALI_PHY_363_DATA */
+		0x00000000	/* DENALI_PHY_364_DATA */
+		0x00000000	/* DENALI_PHY_365_DATA */
+		0x00000000	/* DENALI_PHY_366_DATA */
+		0x00000000	/* DENALI_PHY_367_DATA */
+		0x00000000	/* DENALI_PHY_368_DATA */
+		0x00000000	/* DENALI_PHY_369_DATA */
+		0x00000000	/* DENALI_PHY_370_DATA */
+		0x00000000	/* DENALI_PHY_371_DATA */
+		0x00000000	/* DENALI_PHY_372_DATA */
+		0x00000000	/* DENALI_PHY_373_DATA */
+		0x00000000	/* DENALI_PHY_374_DATA */
+		0x00000000	/* DENALI_PHY_375_DATA */
+		0x00000000	/* DENALI_PHY_376_DATA */
+		0x00000000	/* DENALI_PHY_377_DATA */
+		0x00000000	/* DENALI_PHY_378_DATA */
+		0x00000000	/* DENALI_PHY_379_DATA */
+		0x00000000	/* DENALI_PHY_380_DATA */
+		0x00000000	/* DENALI_PHY_381_DATA */
+		0x00000000	/* DENALI_PHY_382_DATA */
+		0x00000000	/* DENALI_PHY_383_DATA */
+		0x76543210	/* DENALI_PHY_384_DATA */
+		0x0004c008	/* DENALI_PHY_385_DATA */
+		0x000001a2	/* DENALI_PHY_386_DATA */
+		0x00000000	/* DENALI_PHY_387_DATA */
+		0x00000000	/* DENALI_PHY_388_DATA */
+		0x00010000	/* DENALI_PHY_389_DATA */
+		0x01665555	/* DENALI_PHY_390_DATA */
+		0x00665555	/* DENALI_PHY_391_DATA */
+		0x00010f00	/* DENALI_PHY_392_DATA */
+		0x06010200	/* DENALI_PHY_393_DATA */
+		0x00000003	/* DENALI_PHY_394_DATA */
+		0x001700c0	/* DENALI_PHY_395_DATA */
+		0x00cc0101	/* DENALI_PHY_396_DATA */
+		0x00030066	/* DENALI_PHY_397_DATA */
+		0x00000000	/* DENALI_PHY_398_DATA */
+		0x00000000	/* DENALI_PHY_399_DATA */
+		0x00000000	/* DENALI_PHY_400_DATA */
+		0x00000000	/* DENALI_PHY_401_DATA */
+		0x00000000	/* DENALI_PHY_402_DATA */
+		0x00000000	/* DENALI_PHY_403_DATA */
+		0x00000000	/* DENALI_PHY_404_DATA */
+		0x00000000	/* DENALI_PHY_405_DATA */
+		0x04080000	/* DENALI_PHY_406_DATA */
+		0x04080400	/* DENALI_PHY_407_DATA */
+		0x08000000	/* DENALI_PHY_408_DATA */
+		0x0c00c007	/* DENALI_PHY_409_DATA */
+		0x00000100	/* DENALI_PHY_410_DATA */
+		0x00000100	/* DENALI_PHY_411_DATA */
+		0x55555555	/* DENALI_PHY_412_DATA */
+		0xaaaaaaaa	/* DENALI_PHY_413_DATA */
+		0x55555555	/* DENALI_PHY_414_DATA */
+		0xaaaaaaaa	/* DENALI_PHY_415_DATA */
+		0x00005555	/* DENALI_PHY_416_DATA */
+		0x00000000	/* DENALI_PHY_417_DATA */
+		0x00000000	/* DENALI_PHY_418_DATA */
+		0x00000000	/* DENALI_PHY_419_DATA */
+		0x00000000	/* DENALI_PHY_420_DATA */
+		0x00000000	/* DENALI_PHY_421_DATA */
+		0x00000000	/* DENALI_PHY_422_DATA */
+		0x00000000	/* DENALI_PHY_423_DATA */
+		0x00000000	/* DENALI_PHY_424_DATA */
+		0x00000000	/* DENALI_PHY_425_DATA */
+		0x00000000	/* DENALI_PHY_426_DATA */
+		0x00000000	/* DENALI_PHY_427_DATA */
+		0x00000000	/* DENALI_PHY_428_DATA */
+		0x00000000	/* DENALI_PHY_429_DATA */
+		0x00000000	/* DENALI_PHY_430_DATA */
+		0x00000000	/* DENALI_PHY_431_DATA */
+		0x00000000	/* DENALI_PHY_432_DATA */
+		0x00000000	/* DENALI_PHY_433_DATA */
+		0x00000000	/* DENALI_PHY_434_DATA */
+		0x00000000	/* DENALI_PHY_435_DATA */
+		0x00200000	/* DENALI_PHY_436_DATA */
+		0x00000000	/* DENALI_PHY_437_DATA */
+		0x00000000	/* DENALI_PHY_438_DATA */
+		0x00000000	/* DENALI_PHY_439_DATA */
+		0x00000000	/* DENALI_PHY_440_DATA */
+		0x00000000	/* DENALI_PHY_441_DATA */
+		0x00000000	/* DENALI_PHY_442_DATA */
+		0x02700270	/* DENALI_PHY_443_DATA */
+		0x02700270	/* DENALI_PHY_444_DATA */
+		0x02700270	/* DENALI_PHY_445_DATA */
+		0x02700270	/* DENALI_PHY_446_DATA */
+		0x00000270	/* DENALI_PHY_447_DATA */
+		0x00000000	/* DENALI_PHY_448_DATA */
+		0x00000000	/* DENALI_PHY_449_DATA */
+		0x00000000	/* DENALI_PHY_450_DATA */
+		0x00000000	/* DENALI_PHY_451_DATA */
+		0x00800000	/* DENALI_PHY_452_DATA */
+		0x00800080	/* DENALI_PHY_453_DATA */
+		0x00800080	/* DENALI_PHY_454_DATA */
+		0x00800080	/* DENALI_PHY_455_DATA */
+		0x00800080	/* DENALI_PHY_456_DATA */
+		0x00800080	/* DENALI_PHY_457_DATA */
+		0x00800080	/* DENALI_PHY_458_DATA */
+		0x00800080	/* DENALI_PHY_459_DATA */
+		0x00800080	/* DENALI_PHY_460_DATA */
+		0x01a20080	/* DENALI_PHY_461_DATA */
+		0x00000003	/* DENALI_PHY_462_DATA */
+		0x00000000	/* DENALI_PHY_463_DATA */
+		0x00030000	/* DENALI_PHY_464_DATA */
+		0x00000200	/* DENALI_PHY_465_DATA */
+		0x00000000	/* DENALI_PHY_466_DATA */
+		0x51315152	/* DENALI_PHY_467_DATA */
+		0xc0013150	/* DENALI_PHY_468_DATA */
+		0x020000c0	/* DENALI_PHY_469_DATA */
+		0x00100001	/* DENALI_PHY_470_DATA */
+		0x07064208	/* DENALI_PHY_471_DATA */
+		0x000f0c18	/* DENALI_PHY_472_DATA */
+		0x01000140	/* DENALI_PHY_473_DATA */
+		0x00000c20	/* DENALI_PHY_474_DATA */
+		0x00000000	/* DENALI_PHY_475_DATA */
+		0x00000000	/* DENALI_PHY_476_DATA */
+		0x00000000	/* DENALI_PHY_477_DATA */
+		0x00000000	/* DENALI_PHY_478_DATA */
+		0x00000000	/* DENALI_PHY_479_DATA */
+		0x00000000	/* DENALI_PHY_480_DATA */
+		0x00000000	/* DENALI_PHY_481_DATA */
+		0x00000000	/* DENALI_PHY_482_DATA */
+		0x00000000	/* DENALI_PHY_483_DATA */
+		0x00000000	/* DENALI_PHY_484_DATA */
+		0x00000000	/* DENALI_PHY_485_DATA */
+		0x00000000	/* DENALI_PHY_486_DATA */
+		0x00000000	/* DENALI_PHY_487_DATA */
+		0x00000000	/* DENALI_PHY_488_DATA */
+		0x00000000	/* DENALI_PHY_489_DATA */
+		0x00000000	/* DENALI_PHY_490_DATA */
+		0x00000000	/* DENALI_PHY_491_DATA */
+		0x00000000	/* DENALI_PHY_492_DATA */
+		0x00000000	/* DENALI_PHY_493_DATA */
+		0x00000000	/* DENALI_PHY_494_DATA */
+		0x00000000	/* DENALI_PHY_495_DATA */
+		0x00000000	/* DENALI_PHY_496_DATA */
+		0x00000000	/* DENALI_PHY_497_DATA */
+		0x00000000	/* DENALI_PHY_498_DATA */
+		0x00000000	/* DENALI_PHY_499_DATA */
+		0x00000000	/* DENALI_PHY_500_DATA */
+		0x00000000	/* DENALI_PHY_501_DATA */
+		0x00000000	/* DENALI_PHY_502_DATA */
+		0x00000000	/* DENALI_PHY_503_DATA */
+		0x00000000	/* DENALI_PHY_504_DATA */
+		0x00000000	/* DENALI_PHY_505_DATA */
+		0x00000000	/* DENALI_PHY_506_DATA */
+		0x00000000	/* DENALI_PHY_507_DATA */
+		0x00000000	/* DENALI_PHY_508_DATA */
+		0x00000000	/* DENALI_PHY_509_DATA */
+		0x00000000	/* DENALI_PHY_510_DATA */
+		0x00000000	/* DENALI_PHY_511_DATA */
+		0x00000000	/* DENALI_PHY_512_DATA */
+		0x00800000	/* DENALI_PHY_513_DATA */
+		0x00000000	/* DENALI_PHY_514_DATA */
+		0x00000000	/* DENALI_PHY_515_DATA */
+		0x00000000	/* DENALI_PHY_516_DATA */
+		0x00000000	/* DENALI_PHY_517_DATA */
+		0x00000000	/* DENALI_PHY_518_DATA */
+		0x00000001	/* DENALI_PHY_519_DATA */
+		0x00000000	/* DENALI_PHY_520_DATA */
+		0x00000000	/* DENALI_PHY_521_DATA */
+		0x00000000	/* DENALI_PHY_522_DATA */
+		0x00400320	/* DENALI_PHY_523_DATA */
+		0x00000040	/* DENALI_PHY_524_DATA */
+		0x00806420	/* DENALI_PHY_525_DATA */
+		0x00917531	/* DENALI_PHY_526_DATA */
+		0x00806420	/* DENALI_PHY_527_DATA */
+		0x01917531	/* DENALI_PHY_528_DATA */
+		0x02020003	/* DENALI_PHY_529_DATA */
+		0x00000000	/* DENALI_PHY_530_DATA */
+		0x00000000	/* DENALI_PHY_531_DATA */
+		0x00000000	/* DENALI_PHY_532_DATA */
+		0x000fffff	/* DENALI_PHY_533_DATA */
+		0x00000000	/* DENALI_PHY_534_DATA */
+		0x000556aa	/* DENALI_PHY_535_DATA */
+		0x000aaaaa	/* DENALI_PHY_536_DATA */
+		0x000b3133	/* DENALI_PHY_537_DATA */
+		0x0004cd33	/* DENALI_PHY_538_DATA */
+		0x0004cecc	/* DENALI_PHY_539_DATA */
+		0x000b32cc	/* DENALI_PHY_540_DATA */
+		0x0a418820	/* DENALI_PHY_541_DATA */
+		0x103f0000	/* DENALI_PHY_542_DATA */
+		0x0000003f	/* DENALI_PHY_543_DATA */
+		0x00038055	/* DENALI_PHY_544_DATA */
+		0x03800380	/* DENALI_PHY_545_DATA */
+		0x03800380	/* DENALI_PHY_546_DATA */
+		0x00000380	/* DENALI_PHY_547_DATA */
+		0x42080010	/* DENALI_PHY_548_DATA */
+		0x00000003	/* DENALI_PHY_549_DATA */
+		0x00000000	/* DENALI_PHY_550_DATA */
+		0x00000000	/* DENALI_PHY_551_DATA */
+		0x00000000	/* DENALI_PHY_552_DATA */
+		0x00000000	/* DENALI_PHY_553_DATA */
+		0x00000000	/* DENALI_PHY_554_DATA */
+		0x00000000	/* DENALI_PHY_555_DATA */
+		0x00000000	/* DENALI_PHY_556_DATA */
+		0x00000000	/* DENALI_PHY_557_DATA */
+		0x00000000	/* DENALI_PHY_558_DATA */
+		0x00000000	/* DENALI_PHY_559_DATA */
+		0x00000000	/* DENALI_PHY_560_DATA */
+		0x00000000	/* DENALI_PHY_561_DATA */
+		0x00000000	/* DENALI_PHY_562_DATA */
+		0x00000000	/* DENALI_PHY_563_DATA */
+		0x00000000	/* DENALI_PHY_564_DATA */
+		0x00000000	/* DENALI_PHY_565_DATA */
+		0x00000000	/* DENALI_PHY_566_DATA */
+		0x00000000	/* DENALI_PHY_567_DATA */
+		0x00000000	/* DENALI_PHY_568_DATA */
+		0x00000000	/* DENALI_PHY_569_DATA */
+		0x00000000	/* DENALI_PHY_570_DATA */
+		0x00000000	/* DENALI_PHY_571_DATA */
+		0x00000000	/* DENALI_PHY_572_DATA */
+		0x00000000	/* DENALI_PHY_573_DATA */
+		0x00000000	/* DENALI_PHY_574_DATA */
+		0x00000000	/* DENALI_PHY_575_DATA */
+		0x00000000	/* DENALI_PHY_576_DATA */
+		0x00000000	/* DENALI_PHY_577_DATA */
+		0x00000000	/* DENALI_PHY_578_DATA */
+		0x00000000	/* DENALI_PHY_579_DATA */
+		0x00000000	/* DENALI_PHY_580_DATA */
+		0x00000000	/* DENALI_PHY_581_DATA */
+		0x00000000	/* DENALI_PHY_582_DATA */
+		0x00000000	/* DENALI_PHY_583_DATA */
+		0x00000000	/* DENALI_PHY_584_DATA */
+		0x00000000	/* DENALI_PHY_585_DATA */
+		0x00000000	/* DENALI_PHY_586_DATA */
+		0x00000000	/* DENALI_PHY_587_DATA */
+		0x00000000	/* DENALI_PHY_588_DATA */
+		0x00000000	/* DENALI_PHY_589_DATA */
+		0x00000000	/* DENALI_PHY_590_DATA */
+		0x00000000	/* DENALI_PHY_591_DATA */
+		0x00000000	/* DENALI_PHY_592_DATA */
+		0x00000000	/* DENALI_PHY_593_DATA */
+		0x00000000	/* DENALI_PHY_594_DATA */
+		0x00000000	/* DENALI_PHY_595_DATA */
+		0x00000000	/* DENALI_PHY_596_DATA */
+		0x00000000	/* DENALI_PHY_597_DATA */
+		0x00000000	/* DENALI_PHY_598_DATA */
+		0x00000000	/* DENALI_PHY_599_DATA */
+		0x00000000	/* DENALI_PHY_600_DATA */
+		0x00000000	/* DENALI_PHY_601_DATA */
+		0x00000000	/* DENALI_PHY_602_DATA */
+		0x00000000	/* DENALI_PHY_603_DATA */
+		0x00000000	/* DENALI_PHY_604_DATA */
+		0x00000000	/* DENALI_PHY_605_DATA */
+		0x00000000	/* DENALI_PHY_606_DATA */
+		0x00000000	/* DENALI_PHY_607_DATA */
+		0x00000000	/* DENALI_PHY_608_DATA */
+		0x00000000	/* DENALI_PHY_609_DATA */
+		0x00000000	/* DENALI_PHY_610_DATA */
+		0x00000000	/* DENALI_PHY_611_DATA */
+		0x00000000	/* DENALI_PHY_612_DATA */
+		0x00000000	/* DENALI_PHY_613_DATA */
+		0x00000000	/* DENALI_PHY_614_DATA */
+		0x00000000	/* DENALI_PHY_615_DATA */
+		0x00000000	/* DENALI_PHY_616_DATA */
+		0x00000000	/* DENALI_PHY_617_DATA */
+		0x00000000	/* DENALI_PHY_618_DATA */
+		0x00000000	/* DENALI_PHY_619_DATA */
+		0x00000000	/* DENALI_PHY_620_DATA */
+		0x00000000	/* DENALI_PHY_621_DATA */
+		0x00000000	/* DENALI_PHY_622_DATA */
+		0x00000000	/* DENALI_PHY_623_DATA */
+		0x00000000	/* DENALI_PHY_624_DATA */
+		0x00000000	/* DENALI_PHY_625_DATA */
+		0x00000000	/* DENALI_PHY_626_DATA */
+		0x00000000	/* DENALI_PHY_627_DATA */
+		0x00000000	/* DENALI_PHY_628_DATA */
+		0x00000000	/* DENALI_PHY_629_DATA */
+		0x00000000	/* DENALI_PHY_630_DATA */
+		0x00000000	/* DENALI_PHY_631_DATA */
+		0x00000000	/* DENALI_PHY_632_DATA */
+		0x00000000	/* DENALI_PHY_633_DATA */
+		0x00000000	/* DENALI_PHY_634_DATA */
+		0x00000000	/* DENALI_PHY_635_DATA */
+		0x00000000	/* DENALI_PHY_636_DATA */
+		0x00000000	/* DENALI_PHY_637_DATA */
+		0x00000000	/* DENALI_PHY_638_DATA */
+		0x00000000	/* DENALI_PHY_639_DATA */
+		0x00000000	/* DENALI_PHY_640_DATA */
+		0x00800000	/* DENALI_PHY_641_DATA */
+		0x00000000	/* DENALI_PHY_642_DATA */
+		0x00000000	/* DENALI_PHY_643_DATA */
+		0x00000000	/* DENALI_PHY_644_DATA */
+		0x00000000	/* DENALI_PHY_645_DATA */
+		0x00000000	/* DENALI_PHY_646_DATA */
+		0x00000001	/* DENALI_PHY_647_DATA */
+		0x00000000	/* DENALI_PHY_648_DATA */
+		0x00000000	/* DENALI_PHY_649_DATA */
+		0x00000000	/* DENALI_PHY_650_DATA */
+		0x00400320	/* DENALI_PHY_651_DATA */
+		0x00000040	/* DENALI_PHY_652_DATA */
+		0x00008eca	/* DENALI_PHY_653_DATA */
+		0x00009fdb	/* DENALI_PHY_654_DATA */
+		0x00008eca	/* DENALI_PHY_655_DATA */
+		0x01009fdb	/* DENALI_PHY_656_DATA */
+		0x02020003	/* DENALI_PHY_657_DATA */
+		0x00000000	/* DENALI_PHY_658_DATA */
+		0x00000000	/* DENALI_PHY_659_DATA */
+		0x00000000	/* DENALI_PHY_660_DATA */
+		0x000fffff	/* DENALI_PHY_661_DATA */
+		0x00000000	/* DENALI_PHY_662_DATA */
+		0x000556aa	/* DENALI_PHY_663_DATA */
+		0x000aaaaa	/* DENALI_PHY_664_DATA */
+		0x000b3133	/* DENALI_PHY_665_DATA */
+		0x0004cd33	/* DENALI_PHY_666_DATA */
+		0x0004cecc	/* DENALI_PHY_667_DATA */
+		0x000b32cc	/* DENALI_PHY_668_DATA */
+		0x0004a0e6	/* DENALI_PHY_669_DATA */
+		0x080f0000	/* DENALI_PHY_670_DATA */
+		0x0000000f	/* DENALI_PHY_671_DATA */
+		0x00038055	/* DENALI_PHY_672_DATA */
+		0x03800380	/* DENALI_PHY_673_DATA */
+		0x03800380	/* DENALI_PHY_674_DATA */
+		0x00000380	/* DENALI_PHY_675_DATA */
+		0x42080010	/* DENALI_PHY_676_DATA */
+		0x00000003	/* DENALI_PHY_677_DATA */
+		0x00000000	/* DENALI_PHY_678_DATA */
+		0x00000000	/* DENALI_PHY_679_DATA */
+		0x00000000	/* DENALI_PHY_680_DATA */
+		0x00000000	/* DENALI_PHY_681_DATA */
+		0x00000000	/* DENALI_PHY_682_DATA */
+		0x00000000	/* DENALI_PHY_683_DATA */
+		0x00000000	/* DENALI_PHY_684_DATA */
+		0x00000000	/* DENALI_PHY_685_DATA */
+		0x00000000	/* DENALI_PHY_686_DATA */
+		0x00000000	/* DENALI_PHY_687_DATA */
+		0x00000000	/* DENALI_PHY_688_DATA */
+		0x00000000	/* DENALI_PHY_689_DATA */
+		0x00000000	/* DENALI_PHY_690_DATA */
+		0x00000000	/* DENALI_PHY_691_DATA */
+		0x00000000	/* DENALI_PHY_692_DATA */
+		0x00000000	/* DENALI_PHY_693_DATA */
+		0x00000000	/* DENALI_PHY_694_DATA */
+		0x00000000	/* DENALI_PHY_695_DATA */
+		0x00000000	/* DENALI_PHY_696_DATA */
+		0x00000000	/* DENALI_PHY_697_DATA */
+		0x00000000	/* DENALI_PHY_698_DATA */
+		0x00000000	/* DENALI_PHY_699_DATA */
+		0x00000000	/* DENALI_PHY_700_DATA */
+		0x00000000	/* DENALI_PHY_701_DATA */
+		0x00000000	/* DENALI_PHY_702_DATA */
+		0x00000000	/* DENALI_PHY_703_DATA */
+		0x00000000	/* DENALI_PHY_704_DATA */
+		0x00000000	/* DENALI_PHY_705_DATA */
+		0x00000000	/* DENALI_PHY_706_DATA */
+		0x00000000	/* DENALI_PHY_707_DATA */
+		0x00000000	/* DENALI_PHY_708_DATA */
+		0x00000000	/* DENALI_PHY_709_DATA */
+		0x00000000	/* DENALI_PHY_710_DATA */
+		0x00000000	/* DENALI_PHY_711_DATA */
+		0x00000000	/* DENALI_PHY_712_DATA */
+		0x00000000	/* DENALI_PHY_713_DATA */
+		0x00000000	/* DENALI_PHY_714_DATA */
+		0x00000000	/* DENALI_PHY_715_DATA */
+		0x00000000	/* DENALI_PHY_716_DATA */
+		0x00000000	/* DENALI_PHY_717_DATA */
+		0x00000000	/* DENALI_PHY_718_DATA */
+		0x00000000	/* DENALI_PHY_719_DATA */
+		0x00000000	/* DENALI_PHY_720_DATA */
+		0x00000000	/* DENALI_PHY_721_DATA */
+		0x00000000	/* DENALI_PHY_722_DATA */
+		0x00000000	/* DENALI_PHY_723_DATA */
+		0x00000000	/* DENALI_PHY_724_DATA */
+		0x00000000	/* DENALI_PHY_725_DATA */
+		0x00000000	/* DENALI_PHY_726_DATA */
+		0x00000000	/* DENALI_PHY_727_DATA */
+		0x00000000	/* DENALI_PHY_728_DATA */
+		0x00000000	/* DENALI_PHY_729_DATA */
+		0x00000000	/* DENALI_PHY_730_DATA */
+		0x00000000	/* DENALI_PHY_731_DATA */
+		0x00000000	/* DENALI_PHY_732_DATA */
+		0x00000000	/* DENALI_PHY_733_DATA */
+		0x00000000	/* DENALI_PHY_734_DATA */
+		0x00000000	/* DENALI_PHY_735_DATA */
+		0x00000000	/* DENALI_PHY_736_DATA */
+		0x00000000	/* DENALI_PHY_737_DATA */
+		0x00000000	/* DENALI_PHY_738_DATA */
+		0x00000000	/* DENALI_PHY_739_DATA */
+		0x00000000	/* DENALI_PHY_740_DATA */
+		0x00000000	/* DENALI_PHY_741_DATA */
+		0x00000000	/* DENALI_PHY_742_DATA */
+		0x00000000	/* DENALI_PHY_743_DATA */
+		0x00000000	/* DENALI_PHY_744_DATA */
+		0x00000000	/* DENALI_PHY_745_DATA */
+		0x00000000	/* DENALI_PHY_746_DATA */
+		0x00000000	/* DENALI_PHY_747_DATA */
+		0x00000000	/* DENALI_PHY_748_DATA */
+		0x00000000	/* DENALI_PHY_749_DATA */
+		0x00000000	/* DENALI_PHY_750_DATA */
+		0x00000000	/* DENALI_PHY_751_DATA */
+		0x00000000	/* DENALI_PHY_752_DATA */
+		0x00000000	/* DENALI_PHY_753_DATA */
+		0x00000000	/* DENALI_PHY_754_DATA */
+		0x00000000	/* DENALI_PHY_755_DATA */
+		0x00000000	/* DENALI_PHY_756_DATA */
+		0x00000000	/* DENALI_PHY_757_DATA */
+		0x00000000	/* DENALI_PHY_758_DATA */
+		0x00000000	/* DENALI_PHY_759_DATA */
+		0x00000000	/* DENALI_PHY_760_DATA */
+		0x00000000	/* DENALI_PHY_761_DATA */
+		0x00000000	/* DENALI_PHY_762_DATA */
+		0x00000000	/* DENALI_PHY_763_DATA */
+		0x00000000	/* DENALI_PHY_764_DATA */
+		0x00000000	/* DENALI_PHY_765_DATA */
+		0x00000000	/* DENALI_PHY_766_DATA */
+		0x00000000	/* DENALI_PHY_767_DATA */
+		0x00000000	/* DENALI_PHY_768_DATA */
+		0x00800000	/* DENALI_PHY_769_DATA */
+		0x00000000	/* DENALI_PHY_770_DATA */
+		0x00000000	/* DENALI_PHY_771_DATA */
+		0x00000000	/* DENALI_PHY_772_DATA */
+		0x00000000	/* DENALI_PHY_773_DATA */
+		0x00000000	/* DENALI_PHY_774_DATA */
+		0x00000001	/* DENALI_PHY_775_DATA */
+		0x00000000	/* DENALI_PHY_776_DATA */
+		0x00000000	/* DENALI_PHY_777_DATA */
+		0x00000000	/* DENALI_PHY_778_DATA */
+		0x00400320	/* DENALI_PHY_779_DATA */
+		0x00000040	/* DENALI_PHY_780_DATA */
+		0x00008eca	/* DENALI_PHY_781_DATA */
+		0x00009fdb	/* DENALI_PHY_782_DATA */
+		0x00008eca	/* DENALI_PHY_783_DATA */
+		0x01009fdb	/* DENALI_PHY_784_DATA */
+		0x02020003	/* DENALI_PHY_785_DATA */
+		0x00000000	/* DENALI_PHY_786_DATA */
+		0x00000000	/* DENALI_PHY_787_DATA */
+		0x00000000	/* DENALI_PHY_788_DATA */
+		0x000fffff	/* DENALI_PHY_789_DATA */
+		0x00000000	/* DENALI_PHY_790_DATA */
+		0x000556aa	/* DENALI_PHY_791_DATA */
+		0x000aaaaa	/* DENALI_PHY_792_DATA */
+		0x000b3133	/* DENALI_PHY_793_DATA */
+		0x0004cd33	/* DENALI_PHY_794_DATA */
+		0x0004cecc	/* DENALI_PHY_795_DATA */
+		0x000b32cc	/* DENALI_PHY_796_DATA */
+		0x1ee6b16a	/* DENALI_PHY_797_DATA */
+		0x10000000	/* DENALI_PHY_798_DATA */
+		0x00000000	/* DENALI_PHY_799_DATA */
+		0x00038055	/* DENALI_PHY_800_DATA */
+		0x03800380	/* DENALI_PHY_801_DATA */
+		0x03800380	/* DENALI_PHY_802_DATA */
+		0x00000380	/* DENALI_PHY_803_DATA */
+		0x42080010	/* DENALI_PHY_804_DATA */
+		0x00000003	/* DENALI_PHY_805_DATA */
+		0x00000000	/* DENALI_PHY_806_DATA */
+		0x00000000	/* DENALI_PHY_807_DATA */
+		0x00000000	/* DENALI_PHY_808_DATA */
+		0x00000000	/* DENALI_PHY_809_DATA */
+		0x00000000	/* DENALI_PHY_810_DATA */
+		0x00000000	/* DENALI_PHY_811_DATA */
+		0x00000000	/* DENALI_PHY_812_DATA */
+		0x00000000	/* DENALI_PHY_813_DATA */
+		0x00000000	/* DENALI_PHY_814_DATA */
+		0x00000000	/* DENALI_PHY_815_DATA */
+		0x00000000	/* DENALI_PHY_816_DATA */
+		0x00000000	/* DENALI_PHY_817_DATA */
+		0x00000000	/* DENALI_PHY_818_DATA */
+		0x00000000	/* DENALI_PHY_819_DATA */
+		0x00000000	/* DENALI_PHY_820_DATA */
+		0x00000000	/* DENALI_PHY_821_DATA */
+		0x00000000	/* DENALI_PHY_822_DATA */
+		0x00000000	/* DENALI_PHY_823_DATA */
+		0x00000000	/* DENALI_PHY_824_DATA */
+		0x00000000	/* DENALI_PHY_825_DATA */
+		0x00000000	/* DENALI_PHY_826_DATA */
+		0x00000000	/* DENALI_PHY_827_DATA */
+		0x00000000	/* DENALI_PHY_828_DATA */
+		0x00000000	/* DENALI_PHY_829_DATA */
+		0x00000000	/* DENALI_PHY_830_DATA */
+		0x00000000	/* DENALI_PHY_831_DATA */
+		0x00000000	/* DENALI_PHY_832_DATA */
+		0x00000000	/* DENALI_PHY_833_DATA */
+		0x00000000	/* DENALI_PHY_834_DATA */
+		0x00000000	/* DENALI_PHY_835_DATA */
+		0x00000000	/* DENALI_PHY_836_DATA */
+		0x00000000	/* DENALI_PHY_837_DATA */
+		0x00000000	/* DENALI_PHY_838_DATA */
+		0x00000000	/* DENALI_PHY_839_DATA */
+		0x00000000	/* DENALI_PHY_840_DATA */
+		0x00000000	/* DENALI_PHY_841_DATA */
+		0x00000000	/* DENALI_PHY_842_DATA */
+		0x00000000	/* DENALI_PHY_843_DATA */
+		0x00000000	/* DENALI_PHY_844_DATA */
+		0x00000000	/* DENALI_PHY_845_DATA */
+		0x00000000	/* DENALI_PHY_846_DATA */
+		0x00000000	/* DENALI_PHY_847_DATA */
+		0x00000000	/* DENALI_PHY_848_DATA */
+		0x00000000	/* DENALI_PHY_849_DATA */
+		0x00000000	/* DENALI_PHY_850_DATA */
+		0x00000000	/* DENALI_PHY_851_DATA */
+		0x00000000	/* DENALI_PHY_852_DATA */
+		0x00000000	/* DENALI_PHY_853_DATA */
+		0x00000000	/* DENALI_PHY_854_DATA */
+		0x00000000	/* DENALI_PHY_855_DATA */
+		0x00000000	/* DENALI_PHY_856_DATA */
+		0x00000000	/* DENALI_PHY_857_DATA */
+		0x00000000	/* DENALI_PHY_858_DATA */
+		0x00000000	/* DENALI_PHY_859_DATA */
+		0x00000000	/* DENALI_PHY_860_DATA */
+		0x00000000	/* DENALI_PHY_861_DATA */
+		0x00000000	/* DENALI_PHY_862_DATA */
+		0x00000000	/* DENALI_PHY_863_DATA */
+		0x00000000	/* DENALI_PHY_864_DATA */
+		0x00000000	/* DENALI_PHY_865_DATA */
+		0x00000000	/* DENALI_PHY_866_DATA */
+		0x00000000	/* DENALI_PHY_867_DATA */
+		0x00000000	/* DENALI_PHY_868_DATA */
+		0x00000000	/* DENALI_PHY_869_DATA */
+		0x00000000	/* DENALI_PHY_870_DATA */
+		0x00000000	/* DENALI_PHY_871_DATA */
+		0x00000000	/* DENALI_PHY_872_DATA */
+		0x00000000	/* DENALI_PHY_873_DATA */
+		0x00000000	/* DENALI_PHY_874_DATA */
+		0x00000000	/* DENALI_PHY_875_DATA */
+		0x00000000	/* DENALI_PHY_876_DATA */
+		0x00000000	/* DENALI_PHY_877_DATA */
+		0x00000000	/* DENALI_PHY_878_DATA */
+		0x00000000	/* DENALI_PHY_879_DATA */
+		0x00000000	/* DENALI_PHY_880_DATA */
+		0x00000000	/* DENALI_PHY_881_DATA */
+		0x00000000	/* DENALI_PHY_882_DATA */
+		0x00000000	/* DENALI_PHY_883_DATA */
+		0x00000000	/* DENALI_PHY_884_DATA */
+		0x00000000	/* DENALI_PHY_885_DATA */
+		0x00000000	/* DENALI_PHY_886_DATA */
+		0x00000000	/* DENALI_PHY_887_DATA */
+		0x00000000	/* DENALI_PHY_888_DATA */
+		0x00000000	/* DENALI_PHY_889_DATA */
+		0x00000000	/* DENALI_PHY_890_DATA */
+		0x00000000	/* DENALI_PHY_891_DATA */
+		0x00000000	/* DENALI_PHY_892_DATA */
+		0x00000000	/* DENALI_PHY_893_DATA */
+		0x00000000	/* DENALI_PHY_894_DATA */
+		0x00000000	/* DENALI_PHY_895_DATA */
+		0x00000001	/* DENALI_PHY_896_DATA */
+		0x00000000	/* DENALI_PHY_897_DATA */
+		0x01000005	/* DENALI_PHY_898_DATA */
+		0x04000f00	/* DENALI_PHY_899_DATA */
+		0x00020040	/* DENALI_PHY_900_DATA */
+		0x00020055	/* DENALI_PHY_901_DATA */
+		0x00000000	/* DENALI_PHY_902_DATA */
+		0x00000000	/* DENALI_PHY_903_DATA */
+		0x00000000	/* DENALI_PHY_904_DATA */
+		0x00000050	/* DENALI_PHY_905_DATA */
+		0x00000000	/* DENALI_PHY_906_DATA */
+		0x00010100	/* DENALI_PHY_907_DATA */
+		0x00000601	/* DENALI_PHY_908_DATA */
+		0x00000000	/* DENALI_PHY_909_DATA */
+		0x00006400	/* DENALI_PHY_910_DATA */
+		0x01221102	/* DENALI_PHY_911_DATA */
+		0x00000000	/* DENALI_PHY_912_DATA */
+		0x00051f00	/* DENALI_PHY_913_DATA */
+		0x051f051f	/* DENALI_PHY_914_DATA */
+		0x051f051f	/* DENALI_PHY_915_DATA */
+		0x00030003	/* DENALI_PHY_916_DATA */
+		0x03000300	/* DENALI_PHY_917_DATA */
+		0x00000300	/* DENALI_PHY_918_DATA */
+		0x01221102	/* DENALI_PHY_919_DATA */
+		0x00000000	/* DENALI_PHY_920_DATA */
+		0x00000000	/* DENALI_PHY_921_DATA */
+		0x04020000	/* DENALI_PHY_922_DATA */
+		0x00000001	/* DENALI_PHY_923_DATA */
+		0x00000011	/* DENALI_PHY_924_DATA */
+		0x00000011	/* DENALI_PHY_925_DATA */
+		0x00000400	/* DENALI_PHY_926_DATA */
+		0x00000000	/* DENALI_PHY_927_DATA */
+		0x00000011	/* DENALI_PHY_928_DATA */
+		0x00000011	/* DENALI_PHY_929_DATA */
+		0x00004410	/* DENALI_PHY_930_DATA */
+		0x00004410	/* DENALI_PHY_931_DATA */
+		0x00004410	/* DENALI_PHY_932_DATA */
+		0x00004410	/* DENALI_PHY_933_DATA */
+		0x00004410	/* DENALI_PHY_934_DATA */
+		0x00000011	/* DENALI_PHY_935_DATA */
+		0x00004410	/* DENALI_PHY_936_DATA */
+		0x00000011	/* DENALI_PHY_937_DATA */
+		0x00004410	/* DENALI_PHY_938_DATA */
+		0x00000011	/* DENALI_PHY_939_DATA */
+		0x00004410	/* DENALI_PHY_940_DATA */
+		0x00000000	/* DENALI_PHY_941_DATA */
+		0x00000000	/* DENALI_PHY_942_DATA */
+		0x00000000	/* DENALI_PHY_943_DATA */
+		0x04000000	/* DENALI_PHY_944_DATA */
+		0x00000000	/* DENALI_PHY_945_DATA */
+		0x00000000	/* DENALI_PHY_946_DATA */
+		0x00000508	/* DENALI_PHY_947_DATA */
+		0x00000000	/* DENALI_PHY_948_DATA */
+		0x00000000	/* DENALI_PHY_949_DATA */
+		0x00000000	/* DENALI_PHY_950_DATA */
+		0x00000000	/* DENALI_PHY_951_DATA */
+		0x00000000	/* DENALI_PHY_952_DATA */
+		0x00000000	/* DENALI_PHY_953_DATA */
+		0xe4000000	/* DENALI_PHY_954_DATA */
+		0x00000000	/* DENALI_PHY_955_DATA */
+		0x00000000	/* DENALI_PHY_956_DATA */
+		0x01010000	/* DENALI_PHY_957_DATA */
+		0x00000000	/* DENALI_PHY_958_DATA */
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi b/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi
new file mode 100644
index 000000000..f0c478d18
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi
@@ -0,0 +1,1541 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2019 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+&dmc {
+	rockchip,sdram-params = <
+		0x2
+		0xa
+		0x3
+		0x2
+		0x1
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x80241d22
+		0x15050f08
+		0x00000602
+		0x00002122
+		0x0000004c
+		0x00000000
+		0x2
+		0xa
+		0x3
+		0x2
+		0x1
+		0x0
+		0xf
+		0xf
+		0xf
+		0xf
+		1
+		0x80241d22
+		0x15050f08
+		0x00000602
+		0x00002122
+		0x0000004c
+		0x00000000
+		50
+		7
+		2
+		13
+		1
+		0x00000b00
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00013880
+		0x000c3500
+		0x00000005
+		0x00000320
+		0x00027100
+		0x00186a00
+		0x00000005
+		0x00000640
+		0x00002710
+		0x000186a0
+		0x00000005
+		0x01000064
+		0x00000000
+		0x02020101
+		0x00000102
+		0x00000050
+		0x000000c8
+		0x00000000
+		0x06140000
+		0x00081c00
+		0x0400040c
+		0x19042008
+		0x10080a11
+		0x22310800
+		0x00200f0a
+		0x0a030704
+		0x08000204
+		0x00000a0a
+		0x04006db0
+		0x0a0a0804
+		0x0600db60
+		0x0a0a0806
+		0x04000db6
+		0x02030404
+		0x0f0a0800
+		0x08040411
+		0x1400640a
+		0x02010a0a
+		0x00010001
+		0x04082012
+		0x00041109
+		0x00000000
+		0x03010000
+		0x06100048
+		0x0c280090
+		0x00bb0009
+		0x00000000
+		0x00060005
+		0x000a0005
+		0x000a0014
+		0x01000000
+		0x030a0000
+		0x0c000002
+		0x00000103
+		0x0005030a
+		0x00060037
+		0x0005006e
+		0x05050007
+		0x03030605
+		0x06050301
+		0x06030c05
+		0x05050302
+		0x03030305
+		0x00000301
+		0x00000301
+		0x00000001
+		0x00000000
+		0x00000000
+		0x01000000
+		0x80104002
+		0x00040003
+		0x00040005
+		0x00030000
+		0x00050004
+		0x00000004
+		0x00040003
+		0x00040005
+		0x18400000
+		0x00000c20
+		0x185030a0
+		0x02ec0000
+		0x00000176
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x06030300
+		0x00030303
+		0x02030200
+		0x00040703
+		0x03020302
+		0x02000407
+		0x07030203
+		0x00030f04
+		0x00070004
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x20040020
+		0x00200400
+		0x01000400
+		0x00000b80
+		0x00000000
+		0x00000001
+		0x00000002
+		0x0000000e
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00500000
+		0x00640028
+		0x00640404
+		0x005000a0
+		0x060600c8
+		0x000a00c8
+		0x000d0005
+		0x000d0404
+		0x00000000
+		0x00000000
+		0x00000000
+		0x001400a3
+		0x00e30009
+		0x00120024
+		0x00040063
+		0x00000000
+		0x00310031
+		0x00000031
+		0x004d0000
+		0x004d004d
+		0x004d0000
+		0x004d004d
+		0x00010101
+		0x00000000
+		0x00000000
+		0x001400a3
+		0x00e30009
+		0x00120024
+		0x00040063
+		0x00000000
+		0x00310031
+		0x00000031
+		0x004d0000
+		0x004d004d
+		0x004d0000
+		0x004d004d
+		0x00010101
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000001
+		0x00000000
+		0x18151100
+		0x0000000c
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00020003
+		0x00400100
+		0x000c0190
+		0x01000200
+		0x03200040
+		0x00020018
+		0x00400100
+		0x00080032
+		0x00140000
+		0x00030028
+		0x01010100
+		0x02000202
+		0x0b000002
+		0x01000f0f
+		0x00000000
+		0x00000000
+		0x00010003
+		0x00000c03
+		0x00040101
+		0x04010100
+		0x01000000
+		0x02010000
+		0x00000001
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x00000001
+		0x01010001
+		0x05040001
+		0x040a0703
+		0x02080808
+		0x020e000a
+		0x020f010b
+		0x000d0008
+		0x00080b0a
+		0x03000200
+		0x00000100
+		0x00000000
+		0x00000000
+		0x0d000001
+		0x00000028
+		0x00010000
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00010100
+		0x01000000
+		0x00000001
+		0x00000303
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000556aa
+		0x000aaaaa
+		0x000aa955
+		0x00055555
+		0x000b3133
+		0x0004cd33
+		0x0004cecc
+		0x000b32cc
+		0x00010300
+		0x03000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00ffff00
+		0x1a160000
+		0x08000012
+		0x00000c20
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000c20
+		0x00007940
+		0x18500409
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x0000f320
+		0x0176060c
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000176
+		0x00000e9c
+		0x02020205
+		0x03030202
+		0x00000018
+		0x00000000
+		0x00000000
+		0x00001403
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030000
+		0x000a001c
+		0x000e0020
+		0x00060018
+		0x00000000
+		0x00000000
+		0x02000000
+		0x00090305
+		0x00050101
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000001
+		0x01010101
+		0x01000101
+		0x01000100
+		0x00010001
+		0x00010002
+		0x00020100
+		0x00000002
+		0x00000b00
+		0x00000000
+		0x000002ec
+		0x00000176
+		0x000030a0
+		0x00001850
+		0x00001840
+		0x01760c20
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00001850
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000c20
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00000200
+		0x00010000
+		0x00000007
+		0x01000001
+		0x00000000
+		0x3fffffff
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0f000101
+		0x082b3223
+		0x080c0004
+		0x00061c00
+		0x00000214
+		0x00bb0009
+		0x0c280090
+		0x06100048
+		0x00000500
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04040100
+		0x0a000004
+		0x00000128
+		0x00000000
+		0x0003000f
+		0x00000018
+		0x00000000
+		0x00000000
+		0x00060002
+		0x00010001
+		0x00000101
+		0x00020001
+		0x00080004
+		0x00000000
+		0x05030000
+		0x070a0404
+		0x00000000
+		0x00000000
+		0x00000000
+		0x000f0f00
+		0x0000001e
+		0x00000000
+		0x01010300
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00000101
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x55555a5a
+		0x0c050001
+		0x06020009
+		0x00010004
+		0x00000203
+		0x00030000
+		0x170f0000
+		0x00060018
+		0x000e0020
+		0x000a001c
+		0x00000000
+		0x00000000
+		0x00000100
+		0x140a0000
+		0x000d010a
+		0x0100c802
+		0x010a0064
+		0x000e0100
+		0x0100000e
+		0x00c900c9
+		0x00650100
+		0x1e1a0065
+		0x10010204
+		0x06070605
+		0x20000202
+		0x00201000
+		0x00201000
+		0x04041000
+		0x10020100
+		0x0003010c
+		0x004b004a
+		0x1a0f0000
+		0x0102041e
+		0x34000000
+		0x00000000
+		0x00000000
+		0x00010000
+		0x00000400
+		0x00310000
+		0x004d4d00
+		0x00120024
+		0x4d000031
+		0x0000144d
+		0x00310009
+		0x004d4d00
+		0x00000004
+		0x4d000031
+		0x0000244d
+		0x00310012
+		0x004d4d00
+		0x00090014
+		0x4d000031
+		0x0004004d
+		0x00310000
+		0x004d4d00
+		0x00120024
+		0x4d000031
+		0x0000144d
+		0x00310009
+		0x004d4d00
+		0x00000004
+		0x4d000031
+		0x0000244d
+		0x00310012
+		0x004d4d00
+		0x00090014
+		0x4d000031
+		0x0200004d
+		0x00c8000d
+		0x08080064
+		0x040a0404
+		0x03000d92
+		0x010a2001
+		0x0f11080a
+		0x0000110a
+		0x2200d92e
+		0x080c2003
+		0x0809080a
+		0x00000a0a
+		0x11006c97
+		0x040a2002
+		0x0200020a
+		0x02000200
+		0x02000200
+		0x02000200
+		0x02000200
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000400
+		0x00017600
+		0x00000e9c
+		0x00001850
+		0x0000f320
+		0x00000c20
+		0x00007940
+		0x08000000
+		0x00000100
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000002
+		0x76543210
+		0x0004f008
+		0x00020159
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x03665555
+		0x00010f00
+		0x04000100
+		0x00000000
+		0x00170180
+		0x00cc0201
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x30000000
+		0x0c00c007
+		0x00000100
+		0x00000000
+		0xfd02fe01
+		0xf708fb04
+		0xdf20ef10
+		0x7f80bf40
+		0x0001aaaa
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x01590080
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0003150
+		0x010000c0
+		0x00100c00
+		0x07044204
+		0x000f0c18
+		0x01000140
+		0x00000c10
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004f008
+		0x00020159
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x03665555
+		0x00010f00
+		0x04000100
+		0x00000000
+		0x00170180
+		0x00cc0201
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x30000000
+		0x0c00c007
+		0x00000100
+		0x00000000
+		0xfd02fe01
+		0xf708fb04
+		0xdf20ef10
+		0x7f80bf40
+		0x0000aaaa
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x01590080
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0003150
+		0x010000c0
+		0x00100c00
+		0x07044204
+		0x000f0c18
+		0x01000140
+		0x00000c10
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004f008
+		0x00020159
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x03665555
+		0x00010f00
+		0x04000100
+		0x00000000
+		0x00170180
+		0x00cc0201
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x30000000
+		0x0c00c007
+		0x00000100
+		0x00000000
+		0xfd02fe01
+		0xf708fb04
+		0xdf20ef10
+		0x7f80bf40
+		0x0001aaaa
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x01590080
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0003150
+		0x010000c0
+		0x00100c00
+		0x07044204
+		0x000f0c18
+		0x01000140
+		0x00000c10
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x76543210
+		0x0004f008
+		0x00020159
+		0x00000000
+		0x00000000
+		0x00010000
+		0x01665555
+		0x03665555
+		0x00010f00
+		0x04000100
+		0x00000000
+		0x00170180
+		0x00cc0201
+		0x00030066
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x04080000
+		0x04080400
+		0x30000000
+		0x0c00c007
+		0x00000100
+		0x00000000
+		0xfd02fe01
+		0xf708fb04
+		0xdf20ef10
+		0x7f80bf40
+		0x0000aaaa
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00200000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x02800280
+		0x02800280
+		0x02800280
+		0x02800280
+		0x00000280
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00800000
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x00800080
+		0x01590080
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000200
+		0x00000000
+		0x51315152
+		0xc0003150
+		0x010000c0
+		0x00100c00
+		0x07044204
+		0x000f0c18
+		0x01000140
+		0x00000c10
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000002
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00dcba98
+		0x00000000
+		0x00dcba98
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x0a418820
+		0x003f0000
+		0x0000003f
+		0x00030055
+		0x03000300
+		0x03000300
+		0x000c0300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000002
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00030055
+		0x03000300
+		0x03000300
+		0x000c0300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000002
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00400320
+		0x00000040
+		0x00000000
+		0x00000000
+		0x00000000
+		0x01000000
+		0x00020003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x0000002a
+		0x00000015
+		0x00000015
+		0x0000002a
+		0x00000033
+		0x0000000c
+		0x0000000c
+		0x00000033
+		0x1ee6b16a
+		0x10000000
+		0x00000000
+		0x00030055
+		0x03000300
+		0x03000300
+		0x000c0300
+		0x42080010
+		0x00000003
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000005
+		0x04000f01
+		0x00020040
+		0x00020055
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000050
+		0x00000000
+		0x01010100
+		0x00000600
+		0x00000000
+		0x00006400
+		0x09221902
+		0x00000000
+		0x000d1f01
+		0x0d1f0d1f
+		0x0d1f0d1f
+		0x00030003
+		0x03000300
+		0x00000300
+		0x09221902
+		0x00000000
+		0x00000000
+		0x01020000
+		0x00000001
+		0x00000411
+		0x00000411
+		0x00000040
+		0x00000040
+		0x00000411
+		0x00000411
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00004410
+		0x00000411
+		0x00004410
+		0x00000411
+		0x00004410
+		0x00000411
+		0x00004410
+		0x00000000
+		0x00000000
+		0x00000000
+		0x64000000
+		0x00000000
+		0x00000000
+		0x00000108
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0x00000000
+		0xe4000000
+		0x00000000
+		0x00000000
+		0x01010000
+		0x00000000
+	>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399-u-boot.dtsi
new file mode 100644
index 000000000..73922c328
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399-u-boot.dtsi
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+#define USB_CLASS_HUB			9
+
+#include "rockchip-u-boot.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		pci0 = &pcie0;
+		spi1 = &spi1;
+	};
+
+	cic: syscon@ff620000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3399-cic", "syscon";
+		reg = <0x0 0xff620000 0x0 0x100>;
+	};
+
+	dfi: dfi@ff630000 {
+		u-boot,dm-pre-reloc;
+		reg = <0x00 0xff630000 0x00 0x4000>;
+		compatible = "rockchip,rk3399-dfi";
+		rockchip,pmu = <&pmugrf>;
+		clocks = <&cru PCLK_DDR_MON>;
+		clock-names = "pclk_ddr_mon";
+	};
+
+	rng: rng@ff8b8000 {
+		compatible = "rockchip,cryptov1-rng";
+		reg = <0x0 0xff8b8000 0x0 0x1000>;
+		status = "okay";
+	};
+
+	dmc: dmc {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3399-dmc";
+		devfreq-events = <&dfi>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_DDRCLK>;
+		clock-names = "dmc_clk";
+		reg = <0x0 0xffa80000 0x0 0x0800
+		       0x0 0xffa80800 0x0 0x1800
+		       0x0 0xffa82000 0x0 0x2000
+		       0x0 0xffa84000 0x0 0x1000
+		       0x0 0xffa88000 0x0 0x0800
+		       0x0 0xffa88800 0x0 0x1800
+		       0x0 0xffa8a000 0x0 0x2000
+		       0x0 0xffa8c000 0x0 0x1000>;
+	};
+
+	pmusgrf: syscon@ff330000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3399-pmusgrf", "syscon";
+		reg = <0x0 0xff330000 0x0 0xe3d4>;
+	};
+
+};
+
+#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
+&binman {
+	rom {
+		filename = "u-boot.rom";
+		size = <0x400000>;
+		pad-byte = <0xff>;
+
+		mkimage {
+			args = "-n rk3399 -T rkspi";
+			u-boot-spl {
+			};
+		};
+		u-boot-img {
+			offset = <0x40000>;
+		};
+		u-boot {
+			offset = <0x300000>;
+		};
+		fdtmap {
+		};
+	};
+};
+#endif
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&pmu {
+	u-boot,dm-pre-reloc;
+};
+
+&pmugrf {
+	u-boot,dm-pre-reloc;
+};
+
+&pmu {
+	u-boot,dm-pre-reloc;
+};
+
+&pmucru {
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci {
+	max-frequency = <200000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+
+	/* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
+	u-boot,spl-fifo-mode;
+};
+
+&spi1 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&vopb {
+	u-boot,dm-pre-reloc;
+};
+
+&vopl {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399.dtsi b/roms/u-boot/arch/arm/dts/rk3399.dtsi
new file mode 100644
index 000000000..74f2c3d49
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399.dtsi
@@ -0,0 +1,2657 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3399-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3399";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+				core1 {
+					cpu = <&cpu_l1>;
+				};
+				core2 {
+					cpu = <&cpu_l2>;
+				};
+				core3 {
+					cpu = <&cpu_l3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_b0>;
+				};
+				core1 {
+					cpu = <&cpu_b1>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_b0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <436>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_b1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <436>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopl_out>, <&vopb_out>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+		arm,no-tick-in-suspend;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dmac_bus: dma-controller@ff6d0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff6d0000 0x0 0x4000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC0_PERILP>;
+			clock-names = "apb_pclk";
+		};
+
+		dmac_peri: dma-controller@ff6e0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff6e0000 0x0 0x4000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC1_PERILP>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	pcie0: pcie@f8000000 {
+		compatible = "rockchip,rk3399-pcie";
+		reg = <0x0 0xf8000000 0x0 0x2000000>,
+		      <0x0 0xfd000000 0x0 0x1000000>;
+		reg-names = "axi-base", "apb-base";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		aspm-no-l0s;
+		bus-range = <0x0 0x1f>;
+		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+		clock-names = "aclk", "aclk-perf",
+			      "hclk", "pm";
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "legacy", "client";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+				<0 0 0 2 &pcie0_intc 1>,
+				<0 0 0 3 &pcie0_intc 2>,
+				<0 0 0 4 &pcie0_intc 3>;
+		linux,pci-domain = <0>;
+		max-link-speed = <1>;
+		msi-map = <0x0 &its 0x0 0x1000>;
+		phys = <&pcie_phy 0>, <&pcie_phy 1>,
+		       <&pcie_phy 2>, <&pcie_phy 3>;
+		phy-names = "pcie-phy-0", "pcie-phy-1",
+			    "pcie-phy-2", "pcie-phy-3";
+		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000
+			  0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
+		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+			 <&cru SRST_A_PCIE>;
+		reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+			      "pm", "pclk", "aclk";
+		status = "disabled";
+
+		pcie0_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	gmac: ethernet@fe300000 {
+		compatible = "rockchip,rk3399-gmac";
+		reg = <0x0 0xfe300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			 <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+			 <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		power-domains = <&power RK3399_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
+		status = "disabled";
+	};
+
+	sdio0: mmc@fe310000 {
+		compatible = "rockchip,rk3399-dw-mshc",
+			     "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe310000 0x0 0x4000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		resets = <&cru SRST_SDIO0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@fe320000 {
+		compatible = "rockchip,rk3399-dw-mshc",
+			     "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe320000 0x0 0x4000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
+		max-frequency = <150000000>;
+		assigned-clocks = <&cru HCLK_SD>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		power-domains = <&power RK3399_PD_SD>;
+		resets = <&cru SRST_SDMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdhci: sdhci@fe330000 {
+		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+		reg = <0x0 0xfe330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
+		arasan,soc-ctl-syscon = <&grf>;
+		assigned-clocks = <&cru SCLK_EMMC>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+		clock-names = "clk_xin", "clk_ahb";
+		clock-output-names = "emmc_cardclock";
+		#clock-cells = <0>;
+		phys = <&emmc_phy>;
+		phy-names = "phy_arasan";
+		power-domains = <&power RK3399_PD_EMMC>;
+		disable-cqe-dcmd;
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@fe380000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfe380000 0x0 0x20000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+			 <&u2phy0>;
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fe3a0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfe3a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+			 <&u2phy0>;
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fe3c0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfe3c0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+			 <&u2phy1>;
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fe3e0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfe3e0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+			 <&u2phy1>;
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usbdrd3_0: usb@fe800000 {
+		compatible = "rockchip,rk3399-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
+			      "aclk_usb3", "grf_clk";
+		resets = <&cru SRST_A_USB3_OTG0>;
+		reset-names = "usb3-otg";
+		status = "disabled";
+
+		usbdrd_dwc3_0: dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe800000 0x0 0x100000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+				 <&cru SCLK_USB3OTG0_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
+			dr_mode = "otg";
+			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			power-domains = <&power RK3399_PD_USB3>;
+			status = "disabled";
+		};
+	};
+
+	usbdrd3_1: usb@fe900000 {
+		compatible = "rockchip,rk3399-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
+			      "aclk_usb3", "grf_clk";
+		resets = <&cru SRST_A_USB3_OTG1>;
+		reset-names = "usb3-otg";
+		status = "disabled";
+
+		usbdrd_dwc3_1: dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe900000 0x0 0x100000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
+				 <&cru SCLK_USB3OTG1_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
+			dr_mode = "otg";
+			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			power-domains = <&power RK3399_PD_USB3>;
+			status = "disabled";
+		};
+	};
+
+	cdn_dp: dp@fec00000 {
+		compatible = "rockchip,rk3399-cdn-dp";
+		reg = <0x0 0xfec00000 0x0 0x100000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>;
+		assigned-clock-rates = <100000000>, <200000000>;
+		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+		clock-names = "core-clk", "pclk", "spdif", "grf";
+		phys = <&tcphy0_dp>, <&tcphy1_dp>;
+		power-domains = <&power RK3399_PD_HDCP>;
+		resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
+			 <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
+		reset-names = "spdif", "dptx", "apb", "core";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <1>;
+		status = "disabled";
+
+		ports {
+			dp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dp>;
+				};
+
+				dp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dp>;
+				};
+			};
+		};
+	};
+
+	gic: interrupt-controller@fee00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <4>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+
+		reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
+		      <0x0 0xfef00000 0 0xc0000>, /* GICR */
+		      <0x0 0xfff00000 0 0x10000>, /* GICC */
+		      <0x0 0xfff10000 0 0x10000>, /* GICH */
+		      <0x0 0xfff20000 0 0x10000>; /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		its: interrupt-controller@fee20000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xfee20000 0x0 0x20000>;
+		};
+
+		ppi-partitions {
+			ppi_cluster0: interrupt-partition-0 {
+				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+			};
+
+			ppi_cluster1: interrupt-partition-1 {
+				affinity = <&cpu_b0 &cpu_b1>;
+			};
+		};
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,rk3399-saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff110000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C1>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff120000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C2>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff130000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C3>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff140000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C5>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@ff150000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C6>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@ff160000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C7>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff180000 0x0 0x100>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff190000 0x0 0x100>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff1a0000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1a0000 0x0 0x100>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2c_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1b0000 0x0 0x100>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff1c0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1c0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 10>, <&dmac_peri 11>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff1d0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 12>, <&dmac_peri 13>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff1e0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1e0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 14>, <&dmac_peri 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@ff1f0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1f0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 18>, <&dmac_peri 19>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi5: spi@ff200000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff200000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 8>, <&dmac_bus 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff260000 {
+		compatible = "rockchip,rk3399-tsadc";
+		reg = <0x0 0xff260000 0x0 0x100>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <750000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <95000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	qos_emmc: qos@ffa58000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa58000 0x0 0x20>;
+	};
+
+	qos_gmac: qos@ffa5c000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa5c000 0x0 0x20>;
+	};
+
+	qos_pcie: qos@ffa60080 {
+		compatible = "syscon";
+		reg = <0x0 0xffa60080 0x0 0x20>;
+	};
+
+	qos_usb_host0: qos@ffa60100 {
+		compatible = "syscon";
+		reg = <0x0 0xffa60100 0x0 0x20>;
+	};
+
+	qos_usb_host1: qos@ffa60180 {
+		compatible = "syscon";
+		reg = <0x0 0xffa60180 0x0 0x20>;
+	};
+
+	qos_usb_otg0: qos@ffa70000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa70000 0x0 0x20>;
+	};
+
+	qos_usb_otg1: qos@ffa70080 {
+		compatible = "syscon";
+		reg = <0x0 0xffa70080 0x0 0x20>;
+	};
+
+	qos_sd: qos@ffa74000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa74000 0x0 0x20>;
+	};
+
+	qos_sdioaudio: qos@ffa76000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa76000 0x0 0x20>;
+	};
+
+	qos_hdcp: qos@ffa90000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa90000 0x0 0x20>;
+	};
+
+	qos_iep: qos@ffa98000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa98000 0x0 0x20>;
+	};
+
+	qos_isp0_m0: qos@ffaa0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0000 0x0 0x20>;
+	};
+
+	qos_isp0_m1: qos@ffaa0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0080 0x0 0x20>;
+	};
+
+	qos_isp1_m0: qos@ffaa8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8000 0x0 0x20>;
+	};
+
+	qos_isp1_m1: qos@ffaa8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8080 0x0 0x20>;
+	};
+
+	qos_rga_r: qos@ffab0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0000 0x0 0x20>;
+	};
+
+	qos_rga_w: qos@ffab0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0080 0x0 0x20>;
+	};
+
+	qos_video_m0: qos@ffab8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab8000 0x0 0x20>;
+	};
+
+	qos_video_m1_r: qos@ffac0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0000 0x0 0x20>;
+	};
+
+	qos_video_m1_w: qos@ffac0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0080 0x0 0x20>;
+	};
+
+	qos_vop_big_r: qos@ffac8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8000 0x0 0x20>;
+	};
+
+	qos_vop_big_w: qos@ffac8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8080 0x0 0x20>;
+	};
+
+	qos_vop_little: qos@ffad0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_perihp: qos@ffad8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffad8080 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ffae0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	pmu: power-management@ff310000 {
+		compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff310000 0x0 0x1000>;
+
+		/*
+		 * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
+		 * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
+		 * Some of the power domains are grouped together for every
+		 * voltage domain.
+		 * The detail contents as below.
+		 */
+		power: power-controller {
+			compatible = "rockchip,rk3399-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_CENTER */
+			pd_iep@RK3399_PD_IEP {
+				reg = <RK3399_PD_IEP>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>;
+				pm_qos = <&qos_iep>;
+			};
+			pd_rga@RK3399_PD_RGA {
+				reg = <RK3399_PD_RGA>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>;
+				pm_qos = <&qos_rga_r>,
+					 <&qos_rga_w>;
+			};
+			pd_vcodec@RK3399_PD_VCODEC {
+				reg = <RK3399_PD_VCODEC>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_video_m0>;
+			};
+			pd_vdu@RK3399_PD_VDU {
+				reg = <RK3399_PD_VDU>;
+				clocks = <&cru ACLK_VDU>,
+					 <&cru HCLK_VDU>;
+				pm_qos = <&qos_video_m1_r>,
+					 <&qos_video_m1_w>;
+			};
+
+			/* These power domains are grouped by VD_GPU */
+			pd_gpu@RK3399_PD_GPU {
+				reg = <RK3399_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+			};
+
+			/* These power domains are grouped by VD_LOGIC */
+			pd_edp@RK3399_PD_EDP {
+				reg = <RK3399_PD_EDP>;
+				clocks = <&cru PCLK_EDP_CTRL>;
+			};
+			pd_emmc@RK3399_PD_EMMC {
+				reg = <RK3399_PD_EMMC>;
+				clocks = <&cru ACLK_EMMC>;
+				pm_qos = <&qos_emmc>;
+			};
+			pd_gmac@RK3399_PD_GMAC {
+				reg = <RK3399_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>,
+					 <&cru PCLK_GMAC>;
+				pm_qos = <&qos_gmac>;
+			};
+			pd_sd@RK3399_PD_SD {
+				reg = <RK3399_PD_SD>;
+				clocks = <&cru HCLK_SDMMC>,
+					 <&cru SCLK_SDMMC>;
+				pm_qos = <&qos_sd>;
+			};
+			pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+				reg = <RK3399_PD_SDIOAUDIO>;
+				clocks = <&cru HCLK_SDIO>;
+				pm_qos = <&qos_sdioaudio>;
+			};
+			pd_usb3@RK3399_PD_USB3 {
+				reg = <RK3399_PD_USB3>;
+				clocks = <&cru ACLK_USB3>;
+				pm_qos = <&qos_usb_otg0>,
+					 <&qos_usb_otg1>;
+			};
+			pd_vio@RK3399_PD_VIO {
+				reg = <RK3399_PD_VIO>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pd_hdcp@RK3399_PD_HDCP {
+					reg = <RK3399_PD_HDCP>;
+					clocks = <&cru ACLK_HDCP>,
+						 <&cru HCLK_HDCP>,
+						 <&cru PCLK_HDCP>;
+					pm_qos = <&qos_hdcp>;
+				};
+				pd_isp0@RK3399_PD_ISP0 {
+					reg = <RK3399_PD_ISP0>;
+					clocks = <&cru ACLK_ISP0>,
+						 <&cru HCLK_ISP0>;
+					pm_qos = <&qos_isp0_m0>,
+						 <&qos_isp0_m1>;
+				};
+				pd_isp1@RK3399_PD_ISP1 {
+					reg = <RK3399_PD_ISP1>;
+					clocks = <&cru ACLK_ISP1>,
+						 <&cru HCLK_ISP1>;
+					pm_qos = <&qos_isp1_m0>,
+						 <&qos_isp1_m1>;
+				};
+				pd_tcpc0@RK3399_PD_TCPC0 {
+					reg = <RK3399_PD_TCPD0>;
+					clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+						 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+				};
+				pd_tcpc1@RK3399_PD_TCPC1 {
+					reg = <RK3399_PD_TCPD1>;
+					clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+						 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+				};
+				pd_vo@RK3399_PD_VO {
+					reg = <RK3399_PD_VO>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pd_vopb@RK3399_PD_VOPB {
+						reg = <RK3399_PD_VOPB>;
+						clocks = <&cru ACLK_VOP0>,
+							 <&cru HCLK_VOP0>;
+						pm_qos = <&qos_vop_big_r>,
+							 <&qos_vop_big_w>;
+					};
+					pd_vopl@RK3399_PD_VOPL {
+						reg = <RK3399_PD_VOPL>;
+						clocks = <&cru ACLK_VOP1>,
+							 <&cru HCLK_VOP1>;
+						pm_qos = <&qos_vop_little>;
+					};
+				};
+			};
+		};
+	};
+
+	pmugrf: syscon@ff320000 {
+		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff320000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	spi3: spi@ff350000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff350000 0x0 0x1000>;
+		clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff370000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff370000 0x0 0x100>;
+		clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff3c0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3c0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff3d0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3d0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@ff3e0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3e0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c8_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff420000 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff420010 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff420020 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420020 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff420030 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3a_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	vpu: video-codec@ff650000 {
+		compatible = "rockchip,rk3399-vpu";
+		reg = <0x0 0xff650000 0x0 0x800>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3399_PD_VCODEC>;
+	};
+
+	vpu_mmu: iommu@ff650800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff650800 0x0 0x40>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vpu_mmu";
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_VCODEC>;
+	};
+
+	vdec_mmu: iommu@ff660480 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vdec_mmu";
+		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	iep_mmu: iommu@ff670800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff670800 0x0 0x40>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "iep_mmu";
+		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	rga: rga@ff680000 {
+		compatible = "rockchip,rk3399-rga";
+		reg = <0x0 0xff680000 0x0 0x10000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+		reset-names = "core", "axi", "ahb";
+		power-domains = <&power RK3399_PD_RGA>;
+	};
+
+	efuse0: efuse@ff690000 {
+		compatible = "rockchip,rk3399-efuse";
+		reg = <0x0 0xff690000 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE1024NS>;
+		clock-names = "pclk_efuse";
+
+		/* Data cells */
+		cpu_id: cpu-id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpub_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		gpu_leakage: gpu-leakage@18 {
+			reg = <0x18 0x1>;
+		};
+		center_leakage: center-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		cpul_leakage: cpu-leakage@1a {
+			reg = <0x1a 0x1>;
+		};
+		logic_leakage: logic-leakage@1b {
+			reg = <0x1b 0x1>;
+		};
+		wafer_info: wafer-info@1c {
+			reg = <0x1c 0x1>;
+		};
+	};
+
+	pmucru: pmu-clock-controller@ff750000 {
+		compatible = "rockchip,rk3399-pmucru";
+		reg = <0x0 0xff750000 0x0 0x1000>;
+		rockchip,grf = <&pmugrf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&pmucru PLL_PPLL>;
+		assigned-clock-rates = <676000000>;
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3399-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks =
+			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			<&cru PLL_NPLL>,
+			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+			<&cru PCLK_PERIHP>,
+			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+			<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+			<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+			<&cru ACLK_GIC_PRE>,
+			<&cru PCLK_DDR>;
+		assigned-clock-rates =
+			 <594000000>,  <800000000>,
+			<1000000000>,
+			 <150000000>,   <75000000>,
+			  <37500000>,
+			 <100000000>,  <100000000>,
+			  <50000000>, <600000000>,
+			 <100000000>,   <50000000>,
+			 <400000000>, <400000000>,
+			 <200000000>,
+			 <200000000>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff770000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3399-io-voltage-domain";
+			status = "disabled";
+		};
+
+		u2phy0: usb2-phy@e450 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe450 0x10>;
+			clocks = <&cru SCLK_USB2PHY0_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy0_480m";
+			status = "disabled";
+
+			u2phy0_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy0_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+
+		u2phy1: usb2-phy@e460 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe460 0x10>;
+			clocks = <&cru SCLK_USB2PHY1_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy1_480m";
+			status = "disabled";
+
+			u2phy1_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy1_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+
+		emmc_phy: phy@f780 {
+			compatible = "rockchip,rk3399-emmc-phy";
+			reg = <0xf780 0x24>;
+			clocks = <&sdhci>;
+			clock-names = "emmcclk";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie-phy {
+			compatible = "rockchip,rk3399-pcie-phy";
+			clocks = <&cru SCLK_PCIEPHY_REF>;
+			clock-names = "refclk";
+			#phy-cells = <1>;
+			resets = <&cru SRST_PCIEPHY>;
+			drive-impedance-ohm = <50>;
+			reset-names = "phy";
+			status = "disabled";
+		};
+	};
+
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		power-domains = <&power RK3399_PD_TCPD0>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		power-domains = <&power RK3399_PD_TCPD1>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	watchdog@ff848000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x0 0xff848000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	rktimer: rktimer@ff850000 {
+		compatible = "rockchip,rk3399-timer";
+		reg = <0x0 0xff850000 0x0 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
+	};
+
+	spdif: spdif@ff870000 {
+		compatible = "rockchip,rk3399-spdif";
+		reg = <0x0 0xff870000 0x0 0x1000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 7>;
+		dma-names = "tx";
+		clock-names = "mclk", "hclk";
+		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s0: i2s@ff880000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff880000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_8ch_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@ff890000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff890000 0x0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 2>, <&dmac_bus 3>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_2ch_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@ff8a0000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff8a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 4>, <&dmac_bus 5>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff8f0000 {
+		compatible = "rockchip,rk3399-vop-lit";
+		reg = <0x0 0xff8f0000 0x0 0x3efc>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		assigned-clock-rates = <400000000>, <100000000>;
+		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vopl_mmu>;
+		power-domains = <&power RK3399_PD_VOPL>;
+		resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_mipi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
+
+			vopl_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+
+			vopl_out_hdmi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&hdmi_in_vopl>;
+			};
+
+			vopl_out_mipi1: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi1_in_vopl>;
+			};
+
+			vopl_out_dp: endpoint@4 {
+				reg = <4>;
+				remote-endpoint = <&dp_in_vopl>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff8f3f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff8f3f00 0x0 0x100>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vopl_mmu";
+		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VOPL>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopb: vop@ff900000 {
+		compatible = "rockchip,rk3399-vop-big";
+		reg = <0x0 0xff900000 0x0 0x3efc>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		assigned-clock-rates = <400000000>, <100000000>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vopb_mmu>;
+		power-domains = <&power RK3399_PD_VOPB>;
+		resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+
+			vopb_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
+
+			vopb_out_hdmi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&hdmi_in_vopb>;
+			};
+
+			vopb_out_mipi1: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi1_in_vopb>;
+			};
+
+			vopb_out_dp: endpoint@4 {
+				reg = <4>;
+				remote-endpoint = <&dp_in_vopb>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff903f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff903f00 0x0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vopb_mmu";
+		clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VOPB>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp0_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "isp0_mmu";
+		clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_ISP0>;
+		rockchip,disable-mmu-reset;
+	};
+
+	isp1_mmu: iommu@ff924000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "isp1_mmu";
+		clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_ISP1>;
+		rockchip,disable-mmu-reset;
+	};
+
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "hdmi-sound";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
+	hdmi: hdmi@ff940000 {
+		compatible = "rockchip,rk3399-dw-hdmi";
+		reg = <0x0 0xff940000 0x0 0x20000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_HDMI_CTRL>,
+			 <&cru SCLK_HDMI_SFR>,
+			 <&cru PLL_VPLL>,
+			 <&cru PCLK_VIO_GRF>,
+			 <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+		power-domains = <&power RK3399_PD_HDCP>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_hdmi>;
+				};
+				hdmi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	mipi_dsi: mipi@ff960000 {
+		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff960000 0x0 0x8000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
+			 <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
+		power-domains = <&power RK3399_PD_VIO>;
+		resets = <&cru SRST_P_MIPI_DSI0>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
+	mipi_dsi1: mipi@ff968000 {
+		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff968000 0x0 0x8000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>,
+			 <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
+		power-domains = <&power RK3399_PD_VIO>;
+		resets = <&cru SRST_P_MIPI_DSI1>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi1_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mipi1_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi1>;
+				};
+
+				mipi1_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi1>;
+				};
+			};
+		};
+	};
+
+	edp: edp@ff970000 {
+		compatible = "rockchip,rk3399-edp";
+		reg = <0x0 0xff970000 0x0 0x8000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+		clock-names = "dp", "pclk", "grf";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_hpd>;
+		power-domains = <&power RK3399_PD_EDP>;
+		resets = <&cru SRST_P_EDP_CTRL>;
+		reset-names = "dp";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+		};
+	};
+
+	gpu: gpu@ff9a0000 {
+		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
+		reg = <0x0 0xff9a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "gpu", "job", "mmu";
+		clocks = <&cru ACLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power RK3399_PD_GPU>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3399-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio0@ff720000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff720000 0x0 0x100>;
+			clocks = <&pmucru PCLK_GPIO0_PMU>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio1: gpio1@ff730000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff730000 0x0 0x100>;
+			clocks = <&pmucru PCLK_GPIO1_PMU>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio2: gpio2@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff780000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio3: gpio3@ff788000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff788000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO3>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio4: gpio4@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff790000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO4>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
+			bias-disable;
+			drive-strength = <13>;
+		};
+
+		pcfg_pull_none_18ma: pcfg-pull-none-18ma {
+			bias-disable;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_none_20ma: pcfg-pull-none-20ma {
+			bias-disable;
+			drive-strength = <20>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_18ma: pcfg-pull-up-18ma {
+			bias-pull-up;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_up_20ma: pcfg-pull-up-20ma {
+			bias-pull-up;
+			drive-strength = <20>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_8ma: pcfg-pull-down-8ma {
+			bias-pull-down;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_down_12ma: pcfg-pull-down-12ma {
+			bias-pull-down;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_down_18ma: pcfg-pull-down-18ma {
+			bias-pull-down;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_down_20ma: pcfg-pull-down-20ma {
+			bias-pull-down;
+			drive-strength = <20>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		clock {
+			clk_32k: clk-32k {
+				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+			};
+		};
+
+		edp {
+			edp_hpd: edp-hpd {
+				rockchip,pins =
+					<4 RK_PC7 2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<3 RK_PC1 1 &pcfg_pull_none_13ma>,
+					/* mac_rxclk */
+					<3 RK_PB6 1 &pcfg_pull_none>,
+					/* mac_mdio */
+					<3 RK_PB5 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 RK_PB4 1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 RK_PB1 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 RK_PB0 1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 RK_PA7 1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 RK_PA6 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 RK_PA5 1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 RK_PA4 1 &pcfg_pull_none_13ma>,
+					/* mac_rxd3 */
+					<3 RK_PA3 1 &pcfg_pull_none>,
+					/* mac_rxd2 */
+					<3 RK_PA2 1 &pcfg_pull_none>,
+					/* mac_txd3 */
+					<3 RK_PA1 1 &pcfg_pull_none_13ma>,
+					/* mac_txd2 */
+					<3 RK_PA0 1 &pcfg_pull_none_13ma>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<3 RK_PB5 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 RK_PB4 1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_rxer */
+					<3 RK_PB2 1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 RK_PB1 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 RK_PB0 1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 RK_PA7 1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 RK_PA6 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 RK_PA5 1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 RK_PA4 1 &pcfg_pull_none_13ma>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<1 RK_PB7 2 &pcfg_pull_none>,
+					<1 RK_PC0 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<4 RK_PA2 1 &pcfg_pull_none>,
+					<4 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PA1 2 &pcfg_pull_none_12ma>,
+					<2 RK_PA0 2 &pcfg_pull_none_12ma>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins =
+					<4 RK_PC1 1 &pcfg_pull_none>,
+					<4 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins =
+					<1 RK_PB4 1 &pcfg_pull_none>,
+					<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>,
+					<3 RK_PB2 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c6 {
+			i2c6_xfer: i2c6-xfer {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>,
+					<2 RK_PB1 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c7 {
+			i2c7_xfer: i2c7-xfer {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_none>,
+					<2 RK_PA7 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c8 {
+			i2c8_xfer: i2c8-xfer {
+				rockchip,pins =
+					<1 RK_PC5 1 &pcfg_pull_none>,
+					<1 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_2ch_bus: i2s0-2ch-bus {
+				rockchip,pins =
+					<3 RK_PD0 1 &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_bus: i2s0-8ch-bus {
+				rockchip,pins =
+					<3 RK_PD0 1 &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD4 1 &pcfg_pull_none>,
+					<3 RK_PD5 1 &pcfg_pull_none>,
+					<3 RK_PD6 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_2ch_bus: i2s1-2ch-bus {
+				rockchip,pins =
+					<4 RK_PA3 1 &pcfg_pull_none>,
+					<4 RK_PA4 1 &pcfg_pull_none>,
+					<4 RK_PA5 1 &pcfg_pull_none>,
+					<4 RK_PA6 1 &pcfg_pull_none>,
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_up>,
+					<2 RK_PC5 1 &pcfg_pull_up>,
+					<2 RK_PC6 1 &pcfg_pull_up>,
+					<2 RK_PC7 1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins =
+					<2 RK_PD0 1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins =
+					<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins =
+					<2 RK_PD2 1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins =
+					<2 RK_PD3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins =
+					<2 RK_PD4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins =
+					<0 RK_PA4 1 &pcfg_pull_up>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<4 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<4 RK_PB0 1 &pcfg_pull_up>,
+					<4 RK_PB1 1 &pcfg_pull_up>,
+					<4 RK_PB2 1 &pcfg_pull_up>,
+					<4 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<4 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<4 RK_PB5 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins =
+					<0 RK_PA7 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_wp: sdmmc-wp {
+				rockchip,pins =
+					<0 RK_PB0 1 &pcfg_pull_up>;
+			};
+		};
+
+		sleep {
+			ap_pwroff: ap-pwroff {
+				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			ddrio_pwroff: ddrio-pwroff {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif {
+			spdif_bus: spdif-bus {
+				rockchip,pins =
+					<4 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			spdif_bus_1: spdif-bus-1 {
+				rockchip,pins =
+					<3 RK_PC0 3 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<3 RK_PA6 2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins =
+					<3 RK_PA7 2 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins =
+					<3 RK_PA5 2 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins =
+					<3 RK_PA4 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins =
+					<1 RK_PA7 2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins =
+					<1 RK_PB0 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins =
+					<2 RK_PB1 1 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins =
+					<2 RK_PB2 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi3 {
+			spi3_clk: spi3-clk {
+				rockchip,pins =
+					<1 RK_PC1 1 &pcfg_pull_up>;
+			};
+			spi3_cs0: spi3-cs0 {
+				rockchip,pins =
+					<1 RK_PC2 1 &pcfg_pull_up>;
+			};
+			spi3_rx: spi3-rx {
+				rockchip,pins =
+					<1 RK_PB7 1 &pcfg_pull_up>;
+			};
+			spi3_tx: spi3-tx {
+				rockchip,pins =
+					<1 RK_PC0 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi4 {
+			spi4_clk: spi4-clk {
+				rockchip,pins =
+					<3 RK_PA2 2 &pcfg_pull_up>;
+			};
+			spi4_cs0: spi4-cs0 {
+				rockchip,pins =
+					<3 RK_PA3 2 &pcfg_pull_up>;
+			};
+			spi4_rx: spi4-rx {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up>;
+			};
+			spi4_tx: spi4-tx {
+				rockchip,pins =
+					<3 RK_PA1 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi5 {
+			spi5_clk: spi5-clk {
+				rockchip,pins =
+					<2 RK_PC6 2 &pcfg_pull_up>;
+			};
+			spi5_cs0: spi5-cs0 {
+				rockchip,pins =
+					<2 RK_PC7 2 &pcfg_pull_up>;
+			};
+			spi5_rx: spi5-rx {
+				rockchip,pins =
+					<2 RK_PC4 2 &pcfg_pull_up>;
+			};
+			spi5_tx: spi5-tx {
+				rockchip,pins =
+					<2 RK_PC5 2 &pcfg_pull_up>;
+			};
+		};
+
+		testclk {
+			test_clkout0: test-clkout0 {
+				rockchip,pins =
+					<0 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			test_clkout1: test-clkout1 {
+				rockchip,pins =
+					<2 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			test_clkout2: test-clkout2 {
+				rockchip,pins =
+					<0 RK_PB0 3 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<2 RK_PC0 1 &pcfg_pull_up>,
+					<2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<2 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_up>,
+					<3 RK_PB5 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2a {
+			uart2a_xfer: uart2a-xfer {
+				rockchip,pins =
+					<4 RK_PB0 2 &pcfg_pull_up>,
+					<4 RK_PB1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2b {
+			uart2b_xfer: uart2b-xfer {
+				rockchip,pins =
+					<4 RK_PC0 2 &pcfg_pull_up>,
+					<4 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2c {
+			uart2c_xfer: uart2c-xfer {
+				rockchip,pins =
+					<4 RK_PC3 1 &pcfg_pull_up>,
+					<4 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins =
+					<3 RK_PB6 2 &pcfg_pull_up>,
+					<3 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins =
+					<3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins =
+					<3 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<1 RK_PA7 1 &pcfg_pull_up>,
+					<1 RK_PB0 1 &pcfg_pull_none>;
+			};
+		};
+
+		uarthdcp {
+			uarthdcp_xfer: uarthdcp-xfer {
+				rockchip,pins =
+					<4 RK_PC5 2 &pcfg_pull_up>,
+					<4 RK_PC6 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<4 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			pwm0_pin_pull_down: pwm0-pin-pull-down {
+				rockchip,pins =
+					<4 RK_PC2 1 &pcfg_pull_down>;
+			};
+
+			vop0_pwm_pin: vop0-pwm-pin {
+				rockchip,pins =
+					<4 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			vop1_pwm_pin: vop1-pwm-pin {
+				rockchip,pins =
+					<4 RK_PC2 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<4 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			pwm1_pin_pull_down: pwm1-pin-pull-down {
+				rockchip,pins =
+					<4 RK_PC6 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			pwm2_pin_pull_down: pwm2-pin-pull-down {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm3a {
+			pwm3a_pin: pwm3a-pin {
+				rockchip,pins =
+					<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3b {
+			pwm3b_pin: pwm3b-pin {
+				rockchip,pins =
+					<1 RK_PB6 1 &pcfg_pull_none>;
+			};
+		};
+
+		hdmi {
+			hdmi_i2c_xfer: hdmi-i2c-xfer {
+				rockchip,pins =
+					<4 RK_PC1 3 &pcfg_pull_none>,
+					<4 RK_PC0 3 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins =
+					<4 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pcie {
+			pcie_clkreqn_cpm: pci-clkreqn-cpm {
+				rockchip,pins =
+					<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
+				rockchip,pins =
+					<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
new file mode 100644
index 000000000..7c66e1145
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399pro-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1600.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399pro-rock-pi-n10.dts b/roms/u-boot/arch/arm/dts/rk3399pro-rock-pi-n10.dts
new file mode 100644
index 000000000..bf026786f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399pro-rock-pi-n10.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include <rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3399pro-vmarc-som.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
+		     "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399pro-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rk3399pro-u-boot.dtsi
new file mode 100644
index 000000000..7bddc3acd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399pro-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/roms/u-boot/arch/arm/dts/rk3399pro-vmarc-som.dtsi
new file mode 100644
index 000000000..5d087be04
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399pro-vmarc-som.dtsi
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	vcc3v3_pcie: vcc-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	phy-supply = <&vcc_lan>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1850000>;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <140>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	gpio1830-supply = <&vccio_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcca_0v9>;	/* VCC_0V9_S0 */
+	vpcie1v8-supply = <&vcca_1v8>;	/* VCC_1V8_S0 */
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins =	<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	max-frequency = <150000000>;
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_oc>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_oc>;
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3399pro.dtsi b/roms/u-boot/arch/arm/dts/rk3399pro.dtsi
new file mode 100644
index 000000000..bb5ebf660
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3399pro.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+
+#include "rk3399.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399pro";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie_phy {
+	status = "okay";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rk3xxx.dtsi b/roms/u-boot/arch/arm/dts/rk3xxx.dtsi
new file mode 100644
index 000000000..612ed44bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rk3xxx.dtsi
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &emac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		mshc0 = &emmc;
+		mshc1 = &mmc0;
+		mshc2 = &mmc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dmac1_s: dma-controller@20018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20018000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMA1>;
+			clock-names = "apb_pclk";
+		};
+
+		dmac1_ns: dma-controller@2001c000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x2001c000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMA1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dmac2: dma-controller@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMA2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+		clock-output-names = "xin24m";
+	};
+
+	L2: l2-cache-controller@10138000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x10138000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	scu@1013c000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1013c000 0x100>;
+	};
+
+	global_timer: global-timer@1013c200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x1013c200 0x20>;
+		interrupts = <GIC_PPI 11 0x304>;
+		clocks = <&cru CORE_PERI>;
+	};
+
+	local_timer: local-timer@1013c600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1013c600 0x20>;
+		interrupts = <GIC_PPI 13 0x304>;
+		clocks = <&cru CORE_PERI>;
+	};
+
+	gic: interrupt-controller@1013d000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x1013d000 0x1000>,
+		      <0x1013c100 0x0100>;
+	};
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		status = "disabled";
+	};
+
+	uart1: serial@10126000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10126000 0x400>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		status = "disabled";
+	};
+
+	noc: syscon@10128000 {
+		u-boot,dm-spl;
+		compatible = "rockchip,rk3188-noc", "syscon";
+		reg = <0x10128000 0x2000>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3066-usb", "snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
+		phys = <&usbphy0>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host: usb@101c0000 {
+		compatible = "snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		phys = <&usbphy1>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	emac: ethernet@10204000 {
+		compatible = "snps,arc-emac";
+		reg = <0x10204000 0x3c>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref";
+		max-speed = <100>;
+		phy-mode = "rmii";
+
+		status = "disabled";
+	};
+
+	mmc0: dwmmc@10214000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x10214000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <256>;
+		status = "disabled";
+	};
+
+	mmc1: dwmmc@10218000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x10218000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <256>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@1021c000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x1021c000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <256>;
+		status = "disabled";
+	};
+
+	pmu: pmu@20004000 {
+		compatible = "rockchip,rk3066-pmu", "syscon";
+		reg = <0x20004000 0x100>;
+		u-boot,dm-spl;
+	};
+
+	grf: grf@20008000 {
+		compatible = "syscon";
+		reg = <0x20008000 0x200>;
+		u-boot,dm-spl;
+	};
+
+	dmc: dmc@20020000 {
+		/* unreviewed u-boot-specific binding */
+		compatible = "rockchip,rk3188-dmc", "syscon";
+		rockchip,cru = <&cru>;
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+		rockchip,noc = <&noc>;
+		reg = <0x20020000 0x3fc
+		       0x20040000 0x294>;
+		clocks = <&cru PCLK_DDRUPCTL>, <&cru PCLK_PUBL>;
+		clock-names = "pclk_ddrupctl", "pclk_publ";
+		u-boot,dm-spl;
+	};
+
+	i2c0: i2c@2002d000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2002d000 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c@2002f000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2002f000 0x1000>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C1>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	pwm0: pwm@20030000 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20030000 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM01>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20030010 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20030010 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM01>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@2004c000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x2004c000 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM23>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM23>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@20056000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C2>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	i2c3: i2c@2005a000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C3>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	i2c4: i2c@2005e000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2005e000 0x1000>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C4>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	uart2: serial@20064000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x20064000 0x400>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-frequency = <24000000>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		status = "disabled";
+	};
+
+	uart3: serial@20068000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x20068000 0x400>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		status = "disabled";
+	};
+
+	saradc: saradc@2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		status = "disabled";
+	};
+
+	spi0: spi@20070000 {
+		compatible = "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x20070000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac2 10>, <&dmac2 11>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	spi1: spi@20074000 {
+		compatible = "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x20074000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac2 12>, <&dmac2 13>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rockchip-optee.dtsi b/roms/u-boot/arch/arm/dts/rockchip-optee.dtsi
new file mode 100644
index 000000000..cde9b81b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rockchip-optee.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Google LLC
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_HAS_ROM) && defined(CONFIG_FIT)
+&binman {
+	itb {
+		filename = "u-boot.itb";
+		fit {
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+			description = "FIT image with OP-TEE support";
+			#address-cells = <1>;
+
+			images {
+				uboot {
+					description = "U-Boot";
+					type = "standalone";
+					os = "U-Boot";
+					arch = "arm";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					u-boot-nodtb {
+					};
+				};
+				optee {
+					description = "OP-TEE";
+					type = "firmware";
+					arch = "arm";
+					os = "tee";
+					compression = "none";
+					load = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
+					entry = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
+
+					blob-ext {
+						filename = "tee.bin";
+					};
+				};
+				fdt {
+					description = CONFIG_SYS_BOARD;
+					type = "flat_dt";
+					compression = "none";
+
+					u-boot-dtb {
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+				conf {
+					description = CONFIG_SYS_BOARD;
+					firmware = "optee";
+					loadables = "uboot";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+};
+#endif
diff --git a/roms/u-boot/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi b/roms/u-boot/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
new file mode 100644
index 000000000..26b53eac4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vbus_host: vbus-host {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_en_oc>;
+		regulator-name = "vbus_host"; /* HOST-5V */
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vbus_typec: vbus-typec {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_en_oc>;
+		regulator-name = "vbus_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rockchip-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rockchip-u-boot.dtsi
new file mode 100644
index 000000000..eae3ee715
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rockchip-u-boot.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <config.h>
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+};
+
+#ifdef CONFIG_SPL
+&binman {
+	simple-bin {
+		filename = "u-boot-rockchip.bin";
+		pad-byte = <0xff>;
+
+		blob {
+			filename = "idbloader.img";
+		};
+
+		u-boot-img {
+			offset = <CONFIG_SPL_PAD_TO>;
+		};
+	};
+};
+#endif
diff --git a/roms/u-boot/arch/arm/dts/rv1108-elgin-r1.dts b/roms/u-boot/arch/arm/dts/rv1108-elgin-r1.dts
new file mode 100644
index 000000000..83e8b3183
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rv1108-elgin-r1.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+
+#include "rv1108.dtsi"
+
+/ {
+	model = "Elgin RV1108 R1 board";
+	compatible = "elgin,rv1108-elgin", "rockchip,rv1108";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&emmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m0_xfer_pullup>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&pinctrl {
+	uart2m0 {
+		uart2m0_xfer_pullup: uart2m0-xfer-pullup {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 RK_PD1 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/rv1108-evb.dts b/roms/u-boot/arch/arm/dts/rv1108-evb.dts
new file mode 100644
index 000000000..c91776bc1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rv1108-evb.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+
+#include "rv1108.dtsi"
+
+/ {
+	model = "Rockchip RV1108 Evaluation board";
+	compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_otg: vcc5v0-otg-drv {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc5v0_otg";
+		gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&gmac {
+	status = "okay";
+	clock_in_out = <0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
+};
+
+&saradc {
+	status = "okay";
+};
+
+&sfc {
+	status = "okay";
+	flash@0 {
+		compatible = "gd25q256","jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <96000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	vbus-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/rv1108-u-boot.dtsi b/roms/u-boot/arch/arm/dts/rv1108-u-boot.dtsi
new file mode 100644
index 000000000..6a2098b8d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rv1108-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rockchip-u-boot.dtsi"
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/rv1108.dtsi b/roms/u-boot/arch/arm/dts/rv1108.dtsi
new file mode 100644
index 000000000..215d88522
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/rv1108.dtsi
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/rv1108-cru.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rv1108";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		spi0	= &sfc;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@102a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x102a0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	bus_intmem@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+	};
+
+	uart2: serial@10210000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10210000 0x100>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@10220000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10220000 0x100>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@10230000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10230000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	grf: syscon@10300000 {
+		compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
+		reg = <0x10300000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2-phy@100 {
+			compatible = "rockchip,rv1108-usb2phy";
+			reg = <0x100 0x0c>;
+			clocks = <&cru SCLK_USBPHY>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "usbphy";
+			rockchip,usbgrf = <&usbgrf>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-mux";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	saradc: saradc@1038c000 {
+		compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
+		reg = <0x1038c000 0x100>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clock-frequency = <1000000>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		status = "disabled";
+	};
+
+	pmugrf: syscon@20060000 {
+		compatible = "rockchip,rv1108-pmugrf", "syscon";
+		reg = <0x20060000 0x1000>;
+	};
+
+	usbgrf: syscon@202a0000 {
+		compatible = "rockchip,rv1108-usbgrf", "syscon";
+		reg = <0x202a0000 0x1000>;
+	};
+
+	cru: clock-controller@20200000 {
+		compatible = "rockchip,rv1108-cru";
+		reg = <0x20200000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	emmc: dwmmc@30110000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30110000 0x4000>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@30120000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30120000 0x4000>;
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@30130000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 100000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30130000 0x4000>;
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@30140000 {
+		compatible = "generic-ehci";
+		reg = <0x30140000 0x20000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@30160000 {
+		compatible = "generic-ohci";
+		reg = <0x30160000 0x20000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	usb20_otg: usb@30180000 {
+		compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x30180000 0x40000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		g-use-dma;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	sfc: sfc@301c0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x301c0000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_pins>;
+		pinctrl-names = "default";
+		status = "disabled";
+        };
+
+	gmac: ethernet@30200000 {
+		compatible = "rockchip,rv1108-gmac";
+		reg = <0x30200000 0x10000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+                clock-names = "stmmaceth",
+                        "mac_clk_rx", "mac_clk_tx",
+                        "clk_mac_ref", "clk_mac_refout",
+                        "aclk_mac", "pclk_mac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins>;
+		phy-mode = "rmii";
+		max-speed = <100>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x1000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rv1108-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@20030000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20030000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@10310000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10310000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@10320000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10320000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@10330000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10330000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>,
+						<1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>,
+						<1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>,
+						<1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+						<2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		i2c2m1 {
+			i2c2m1_xfer: i2c2m1-xfer {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
+			};
+
+			i2c2m1_gpio: i2c2m1-gpio {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c2m05v {
+			i2c2m05v_xfer: i2c2m05v-xfer {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			i2c2m05v_gpio: i2c2m05v-gpio {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		sfc {
+			sfc_pins: sfc-pins {
+				rockchip,pins = <2 RK_PA3 RK_FUNC_3 &pcfg_pull_none>,
+						<2 RK_PA2 RK_FUNC_3 &pcfg_pull_none>,
+						<2 RK_PA1 RK_FUNC_3 &pcfg_pull_none>,
+						<2 RK_PA0 RK_FUNC_3 &pcfg_pull_none>,
+						<2 RK_PB7 RK_FUNC_2 &pcfg_pull_none>,
+						<2 RK_PB4 RK_FUNC_3 &pcfg_pull_none>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 RK_PB4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins = <2 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA1 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA2 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA3 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA5 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA6 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA7 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
+						<3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_gpio: uart0-rts-gpio {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+						<1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart01rts: uart1-rts {
+				rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
+						<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
+						<3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2_5v {
+			uart2_5v_cts: uart2_5v-cts {
+				rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart2_5v_rts: uart2_5v-rts {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/s5p4418-nanopi2.dts b/roms/u-boot/arch/arm/dts/s5p4418-nanopi2.dts
new file mode 100644
index 000000000..4deaf10a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s5p4418-nanopi2.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Stefan Bosch <stefan_b@posteo.net>
+ *
+ * (C) Copyright 2017 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park@nexell.co.kr>
+ */
+
+/dts-v1/;
+#include "s5p4418.dtsi"
+
+/ {
+	model = "FriendlyElec boards based on Nexell s5p4418";
+	cpu-model = "S5p4418";
+
+	compatible = "friendlyelec,nanopi2",
+		     "nexell,s5p4418";
+
+	aliases {
+		mmc0 = "/mmc@c0069000";
+		mmc1 = "/mmc@c0062000";
+		i2c0 = "/i2c@c00a4000";
+		i2c1 = "/i2c@c00a5000";
+		i2c2 = "/i2c@c00a6000";
+	};
+
+	mmc0:mmc@c0062000 {
+		frequency = <50000000>;
+		drive_dly = <0x0>;
+		drive_shift = <0x03>;
+		sample_dly = <0x00>;
+		sample_shift = <0x02>;
+		mmcboost = <0>;
+		status = "okay";
+	};
+
+	mmc2:mmc@c0069000 {
+		frequency = <50000000>;
+		drive_dly = <0x0>;
+		drive_shift = <0x03>;
+		sample_dly = <0x00>;
+		sample_shift = <0x02>;
+		mmcboost = <0>;
+		status = "okay";
+	};
+
+	/* NanoPi2: Header "CON2", NanoPC-T2: EEPROM (MAC-Addr.) and Audio */
+	i2c0:i2c@c00a4000 {
+		status ="okay";
+	};
+
+	/* NanoPi2: Header "CON2" and HDMI, NanoPC-T2: HDMI */
+	i2c1:i2c@c00a5000 {
+		status ="okay";
+	};
+
+	/* NanoPi2: LCD interface, NanoPC-T2: LCD, LVDS and MIPI interfaces */
+	i2c2:i2c@c00a6000 {
+		status ="okay";
+	};
+
+	dp0:dp@c0102800 {
+		status = "okay";
+		module = <0>;
+		lcd-type = "lvds";
+
+		dp-device {
+			format = <0>;	/* 0:VESA, 1:JEIDA */
+		};
+
+		dp-sync {
+			h_active_len = <1024>;
+			h_front_porch = <84>;
+			h_back_porch = <84>;
+			h_sync_width = <88>;
+			h_sync_invert = <0>;
+			v_active_len = <600>;
+			v_front_porch = <10>;
+			v_back_porch = <10>;
+			v_sync_width = <20>;
+			v_sync_invert = <0>;
+		};
+
+		dp-ctrl {
+			clk_src_lv0 = <3>;
+			clk_div_lv0 = <16>;
+			clk_src_lv1 = <7>;
+			clk_div_lv1 = <1>;
+			out_format = <2>;
+		};
+
+		dp-planes {
+			layer_top {
+				screen_width = <1024>;
+				screen_height = <600>;
+				back_color = <0x0>;
+			};
+
+			layer_1 {	/* RGB 1 */
+				width = <1024>;
+				height = <600>;
+				format = <0x06530000>;
+				pixel_byte = <4>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/s5p4418-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/s5p4418-pinctrl.dtsi
new file mode 100644
index 000000000..a7e1c2c38
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s5p4418-pinctrl.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Nexell's s5p6818 SoC pin-mux and pin-config device tree source
+ *
+ * (C) Copyright 2020 Stefan Bosch <stefan_b@posteo.net>
+ *
+ * Copyright (C) 2016  Nexell Co., Ltd.
+ *		http://www.nexell.co.kr
+ *
+ * Nexell's s5p6818 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+pinctrl@C0010000 {
+	/*
+	 * values for "pin-pull":
+	 *	pulldown resistor = 0
+	 *	pullup = 1
+	 *	no pullup/down = 2
+	 */
+
+	/* MMC */
+	mmc0_clk: mmc0-clk {
+		pins = "gpioa-29";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <2>;
+	};
+
+	mmc0_cmd: mmc0-cmd {
+		pins = "gpioa-31";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <1>;
+	};
+
+	mmc0_bus4: mmc0-bus-width4 {
+		pins = "gpiob-1, gpiob-3, gpiob-5, gpiob-7";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <1>;
+	};
+
+	mmc1_clk: mmc1-clk {
+		pins = "gpiod-22";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <2>;
+	};
+
+	mmc1_cmd: mmc1-cmd {
+		pins = "gpiod-23";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <1>;
+	};
+
+	mmc1_bus4: mmc1-bus-width4 {
+		pins = "gpiod-24, gpiod-25, gpiod-26, gpiod-27";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <1>;
+	};
+
+	mmc2_clk: mmc2-clk {
+		pins = "gpioc-18";
+		pin-function = <2>;
+		pin-pull = <2>;
+		pin-strength = <2>;
+	};
+
+	mmc2_cmd: mmc2-cmd {
+		pins = "gpioc-19";
+		pin-function = <2>;
+		pin-pull = <2>;
+		pin-strength = <1>;
+	};
+
+	mmc2_bus4: mmc2-bus-width4 {
+		pins = "gpioc-20, gpioc-21, gpioc-22, gpioc-23";
+		pin-function = <2>;
+		pin-pull = <2>;
+		pin-strength = <1>;
+	};
+
+	mmc2_bus8: mmc2-bus-width8 {
+		nexell,pins = "gpioe-21", "gpioe-22", "gpioe-23", "gpioe-24";
+		pin-function = <2>;
+		pin-pull = <2>;
+		pin-strength = <1>;
+	};
+
+	/* I2C */
+	i2c0_sda:i2c0-sda {
+		pins = "gpiod-3";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <0>;
+	};
+
+	i2c0_scl:i2c0-scl {
+		pins = "gpiod-2";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <0>;
+	};
+
+	i2c1_sda:i2c1-sda {
+		pins = "gpiod-5";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <0>;
+	};
+
+	i2c1_scl:i2c1-scl {
+		pins = "gpiod-4";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <0>;
+	};
+
+	i2c2_sda:i2c2-sda {
+		pins = "gpiod-7";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <0>;
+	};
+
+	i2c2_scl:i2c2-scl {
+		pins = "gpiod-6";
+		pin-function = <1>;
+		pin-pull = <2>;
+		pin-strength = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/s5p4418.dtsi b/roms/u-boot/arch/arm/dts/s5p4418.dtsi
new file mode 100644
index 000000000..a4d1a1bd0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s5p4418.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Stefan Bosch <stefan_b@posteo.net>
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park@nexell.co.kr>
+ *
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	#include "s5p4418-pinctrl.dtsi"
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		gmac = "/ethernet@c0060000";
+	};
+
+	mmc2:mmc@c0069000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nexell,nexell-dwmmc";
+		reg = <0xc0069000 0x1000>;
+		bus-width = <4>;
+		index = <2>;
+		max-frequency = <50000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc2_clk>, <&mmc2_cmd>, <&mmc2_bus4>;
+		status = "disabled";
+	};
+
+	mmc1:mmc@c0068000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nexell,nexell-dwmmc";
+		reg = <0xc0068000 0x1000>;
+		bus-width = <4>;
+		index = <1>;
+		max-frequency = <50000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc1_clk>, <&mmc1_cmd>, <&mmc1_bus4>;
+		status = "disabled";
+	};
+
+	mmc0:mmc@c0062000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nexell,nexell-dwmmc";
+		reg = <0xc0062000 0x1000>;
+		bus-width = <4>;
+		index = <0>;
+		max-frequency = <50000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc0_clk>, <&mmc0_cmd>, <&mmc0_bus4>;
+		status = "disabled";
+	};
+
+	i2c0:i2c@c00a4000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nexell,s5pxx18-i2c";
+		reg = <0xc00a4000 0x100>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_sda>, <&i2c0_scl>;
+		status ="disabled";
+	};
+
+	i2c1:i2c@c00a5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nexell,s5pxx18-i2c";
+		reg = <0xc00a5000 0x100>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_sda>, <&i2c1_scl>;
+		status ="disabled";
+	};
+
+	i2c2:i2c@c00a6000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nexell,s5pxx18-i2c";
+		reg = <0xc00a6000 0x100>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_sda>, <&i2c2_scl>;
+		status ="disabled";
+	};
+
+	dp0:dp@c0102800 {
+		compatible = "nexell,nexell-display";
+		reg = <0xc0102800 0x100>;
+		index = <0>;
+		u-boot,dm-pre-reloc;
+		status = "disabled";
+	};
+
+	dp1:dp@c0102c00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nexell,nexell-display";
+		reg = <0xc0102c00 0x100>;
+		index = <1>;
+		status = "disabled";
+	};
+
+	gpio_a:gpio@c001a000 {
+		compatible = "nexell,nexell-gpio";
+		reg = <0xc001a000 0x00000010>;
+		altr,gpio-bank-width = <32>;
+		gpio-bank-name = "gpio_a";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_b:gpio@c001b000 {
+		compatible = "nexell,nexell-gpio";
+		reg = <0xc001b000 0x00000010>;
+		altr,gpio-bank-width = <32>;
+		gpio-bank-name = "gpio_b";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_c:gpio@c001c000 {
+		compatible = "nexell,nexell-gpio";
+		reg = <0xc001c000 0x00000010>;
+		nexell,gpio-bank-width = <32>;
+		gpio-bank-name = "gpio_c";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_d:gpio@c001d000 {
+		compatible = "nexell,nexell-gpio";
+		reg = <0xc001d000 0x00000010>;
+		nexell,gpio-bank-width = <32>;
+		gpio-bank-name = "gpio_d";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_e:gpio@c001e000 {
+		compatible = "nexell,nexell-gpio";
+		reg = <0xc001e000 0x00000010>;
+		nexell,gpio-bank-width = <32>;
+		gpio-bank-name = "gpio_e";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_alv:gpio@c0010800 {
+		compatible = "nexell,nexell-gpio";
+		reg = <0xc0010800 0x00000010>;
+		nexell,gpio-bank-width = <32>;
+		gpio-bank-name = "gpio_alv";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pinctrl@C0010000 {
+		compatible = "nexell,s5pxx18-pinctrl";
+		reg = <0xc0010000 0xf000>;
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/s5pc100-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/s5pc100-pinctrl.dtsi
new file mode 100644
index 000000000..290f4cfd0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s5pc100-pinctrl.dtsi
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions to enable a generic Exynos GPIO driver
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/ {
+	pinctrl@e0300000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpc: gpc {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpd: gpd {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpg3: gpg3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpi: gpi {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj2: gpj2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj3: gpj3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj4: gpj4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpl3: gpl3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpl4: gpl4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gph0: gph0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gph1: gph1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gph2: gph2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gph3: gph3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/s5pc110-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/s5pc110-pinctrl.dtsi
new file mode 100644
index 000000000..ea97ca6a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s5pc110-pinctrl.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions to enable a generic Exynos GPIO driver
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/ {
+	pinctrl@e0200000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpg3: gpg3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpi: gpi {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj2: gpj2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj3: gpj3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpj4: gpj4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp01: gpmp01 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp02: gpmp02 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp03: gpmp03 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp04: gpmp04 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp05: gpmp05 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp06: gpmp06 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp07: gpmp07 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp10: gpmp10 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp11: gpmp11 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp12: gpmp12 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp13: gpmp13 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp14: gpmp14 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp15: gpmp15 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp16: gpmp16 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp17: gpmp17 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp18: gpmp18 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp20: gpmp20 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp21: gpmp21 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp22: gpmp22 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp23: gpmp23 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp24: gpmp24 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp25: gpmp25 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp26: gpmp26 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp27: gpmp27 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpmp28: gpmp28 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gph0: gph0 {
+			reg = <0xc00 0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gph1: gph1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gph2: gph2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gph3: gph3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/s5pc1xx-goni.dts b/roms/u-boot/arch/arm/dts/s5pc1xx-goni.dts
new file mode 100644
index 000000000..90e340504
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s5pc1xx-goni.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung's S5PC110-based Goni board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include "s5pc110-pinctrl.dtsi"
+
+/ {
+	model = "Samsung Goni based on S5PC110";
+	compatible = "samsung,goni", "samsung,s5pc110";
+
+	aliases {
+		serial2 = "/serial@e2900800";
+		console = "/serial@e2900800";
+		pinctrl0 = &pinctrl0;
+		i2c3 = &i2c_pmic;
+	};
+
+	pinctrl0: pinctrl@e0200000 {
+		compatible = "samsung,s5pc110-pinctrl";
+		reg = <0xe0200000 0x1000>;
+	};
+
+	serial@e2900800 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0xe2900800 0x400>;
+		id = <2>;
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		gpios = <&gpj4 0 0>, /* sda */
+			<&gpj4 3 0>; /* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max8998-pmic@66 {
+			compatible = "maxim,max8998";
+			reg = <0x66 0 0>;
+
+			voltage-regulators {
+				ldo2_reg: LDO2 {
+					regulator-compatible = "LDO2";
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-compatible = "LDO3";
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-compatible = "LDO4";
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-compatible = "LDO5";
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-compatible = "LDO6";
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-compatible = "LDO7";
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-compatible = "LDO9";
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-compatible = "LDO11";
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-compatible = "LDO12";
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-compatible = "LDO13";
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-compatible = "LDO14";
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-compatible = "LDO15";
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-compatible = "LDO16";
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-compatible = "LDO17";
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-compatible = "BUCK1";
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-compatible = "BUCK2";
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-compatible = "BUCK3";
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-compatible = "BUCK4";
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/s5pc1xx-smdkc100.dts b/roms/u-boot/arch/arm/dts/s5pc1xx-smdkc100.dts
new file mode 100644
index 000000000..d36d662cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s5pc1xx-smdkc100.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung's Exynos4210-based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include "s5pc100-pinctrl.dtsi"
+
+/ {
+	model = "Samsung SMDKC100 based on S5PC100";
+	compatible = "samsung,smdkc100", "samsung,s5pc100";
+
+	aliases {
+		serial0 = "/serial@ec000000";
+		console = "/serial@ec000000";
+		pinctrl0 = &pinctrl0;
+	};
+
+	pinctrl0: pinctrl@e0300000 {
+		compatible = "samsung,s5pc100-pinctrl";
+		reg = <0xe0200000 0x1000>;
+	};
+
+	serial@ec000000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0xec000000 0x100>;
+		interrupts = <0 51 0>;
+		id = <0>;
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/s700-cubieboard7.dts b/roms/u-boot/arch/arm/dts/s700-cubieboard7.dts
new file mode 100644
index 000000000..63e375cd9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s700-cubieboard7.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "s700.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard7", "actions,s700";
+	model = "CubieBoard7";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	memory@1,e0000000 {
+		device_type = "memory";
+		reg = <0x1 0xe0000000 0x0 0x0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_default>;
+};
+
+&pinctrl {
+	i2c0_default: i2c0_default {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_default: i2c1_default {
+		pinmux {
+			groups = "i2c1_dummy";
+			function = "i2c1";
+		};
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_default: i2c2_default {
+		pinmux {
+			groups = "i2c2_dummy";
+			function = "i2c2";
+		};
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/s700-u-boot.dtsi b/roms/u-boot/arch/arm/dts/s700-u-boot.dtsi
new file mode 100644
index 000000000..1b2768272
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s700-u-boot.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Amit Singh Tomar <amittomer25@gmail.com>
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+
+		gmac:  ethernet@e0220000 {
+			compatible = "actions,s700-ethernet";
+			reg = <0 0xe0220000 0 0x2000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			local-mac-address = [ 00 18 fe 66 66 66 ];
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "ethernet", "rmii_ref";
+			phy-mode = "rmii";
+			status = "okay";
+                };
+
+	};
+};
+
+&uart3 {
+	u-boot,dm-pre-reloc;
+};
+
+&cmu {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/s700.dtsi b/roms/u-boot/arch/arm/dts/s700.dtsi
new file mode 100644
index 000000000..2006ad542
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s700.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s700-reset.h>
+
+/ {
+	compatible = "actions,s700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		cmu: clock-controller@e0168000 {
+			compatible = "actions,s700-cmu";
+			reg = <0x0 0xe0168000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0174000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0178000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e017c000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe017c000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e01b0100 {
+			compatible = "actions,s700-sps";
+			reg = <0x0 0xe01b0100 0x0 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		timer: timer@e024c000 {
+			compatible = "actions,s700-timer";
+			reg = <0x0 0xe024c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s700-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 136>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/s900-u-boot.dtsi b/roms/u-boot/arch/arm/dts/s900-u-boot.dtsi
new file mode 100644
index 000000000..a95f2cc62
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s900-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart5 {
+	u-boot,dm-pre-reloc;
+};
+
+&cmu {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/s900.dtsi b/roms/u-boot/arch/arm/dts/s900.dtsi
new file mode 100644
index 000000000..eb35cf78a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/s900.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s900-reset.h>
+
+/ {
+	compatible = "actions,s900";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	diff24M: diff24M {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e012e000 {
+			compatible = "actions,s900-sps";
+			reg = <0x0 0xe012e000 0x0 0x2000>;
+			#power-domain-cells = <1>;
+		};
+
+		cmu: clock-controller@e0160000 {
+			compatible = "actions,s900-cmu";
+			reg = <0x0 0xe0160000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0172000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0172000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0174000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e0176000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0176000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e0178000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e017a000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe017a000 0 0x1000>;
+			clocks = <&cmu CLK_I2C5>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s900-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer: timer@e0228000 {
+			compatible = "actions,s900-timer";
+			reg = <0x0 0xe0228000 0x0 0x8000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		dma: dma-controller@e0260000 {
+			compatible = "actions,s900-dma";
+			reg = <0x0 0xe0260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+		};
+
+		mmc0: mmc@e0330000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0330000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@e0334000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0334000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@e0338000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0338000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc3: mmc@e033c000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe033c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD3>;
+			resets = <&cmu RESET_SD3>;
+			dmas = <&dma 46>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/salvator-common.dtsi b/roms/u-boot/arch/arm/dts/salvator-common.dtsi
new file mode 100644
index 000000000..98bbcafc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/salvator-common.dtsi
@@ -0,0 +1,931 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for common parts of Salvator-X board variants
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-AK4613
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif1;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+
+		brightness-levels = <256 128 64 16 8 4 0>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12v>;
+		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	cvbs-in {
+		compatible = "composite-video-connector";
+		label = "CVBS IN";
+
+		port {
+			cvbs_con: endpoint {
+				remote-endpoint = <&adv7482_ain7>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		label = "HDMI IN";
+		type = "a";
+
+		port {
+			hdmi_in_con: endpoint {
+				remote-endpoint = <&adv7482_hdmi>;
+			};
+		};
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		label = "HDMI0 OUT";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+			};
+		};
+	};
+
+	hdmi1-out {
+		compatible = "hdmi-connector";
+		label = "HDMI1 OUT";
+		type = "a";
+
+		port {
+			hdmi1_con: endpoint {
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW4-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW4-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW4-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW4-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "TSW0";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "TSW1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "TSW2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12v: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		label = "rcar-sound";
+
+		dais = <&rsnd_port0>;
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi3: regulator-vcc-sdhi3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI3 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi3: regulator-vccq-sdhi3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI3 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	/* External DU dot clocks */
+	x21_clk: x21-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x22_clk: x22-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x23_clk: x23-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&csi20 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			csi20_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1>;
+				remote-endpoint = <&adv7482_txb>;
+			};
+		};
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7482_txa>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+
+		port {
+			ak4613_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70 0x71 0x72 0x73 0x74 0x75
+		       0x60 0x61 0x62 0x63 0x64 0x65>;
+		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gpio6>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
+			     <31 IRQ_TYPE_LEVEL_LOW>;
+
+		port@7 {
+			reg = <7>;
+
+			adv7482_ain7: endpoint {
+				remote-endpoint = <&cvbs_con>;
+			};
+		};
+
+		port@8 {
+			reg = <8>;
+
+			adv7482_hdmi: endpoint {
+				remote-endpoint = <&hdmi_in_con>;
+			};
+		};
+
+		port@a {
+			reg = <10>;
+
+			adv7482_txa: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+
+		port@b {
+			reg = <11>;
+
+			adv7482_txb: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1>;
+				remote-endpoint = <&csi20_in>;
+			};
+		};
+	};
+
+	csa_vdd: adc@7c {
+		compatible = "maxim,max9611";
+		reg = <0x7c>;
+
+		shunt-resistor-micro-ohms = <5000>;
+	};
+
+	csa_dvfs: adc@7f {
+		compatible = "maxim,max9611";
+		reg = <0x7f>;
+
+		shunt-resistor-micro-ohms = <5000>;
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0xf>;
+		rohm,rstbmode-level;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_17", "GP_5_20", "GP_5_22";
+		bias-pull-up;
+	};
+
+	pwm1_pins: pwm1 {
+		groups = "pwm1_a";
+		function = "pwm1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_a", "scif1_ctrl";
+		function = "scif1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <3300>;
+	};
+
+	sdhi3_pins_uhs: sd3_uhs {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+
+		pwen {
+			pins = "GP_6_26";
+			bias-pull-down;
+		};
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_endpoint0: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+
+				dai-format = "left_j";
+				bitclock-master = <&rsnd_endpoint0>;
+				frame-master = <&rsnd_endpoint0>;
+
+				playback = <&ssi0 &src0 &dvc0>;
+				capture  = <&ssi1 &src1 &dvc1>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	/* status = "okay"; */
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi3>;
+	vqmmc-supply = <&vccq_sdhi3>;
+	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&vin0 {
+	status = "okay";
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&vin6 {
+	status = "okay";
+};
+
+&vin7 {
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/salvator-x.dtsi b/roms/u-boot/arch/arm/dts/salvator-x.dtsi
new file mode 100644
index 000000000..ddee50e64
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/salvator-x.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board";
+	compatible = "renesas,salvator-x";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/salvator-xs.dtsi b/roms/u-boot/arch/arm/dts/salvator-xs.dtsi
new file mode 100644
index 000000000..717d42758
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/salvator-xs.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board";
+	compatible = "renesas,salvator-xs";
+};
+
+&extal_clk {
+	clock-frequency = <16640000>;
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	versaclock6: clock-generator@6a {
+		compatible = "idt,5p49v6901";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sam9x60.dtsi b/roms/u-boot/arch/arm/dts/sam9x60.dtsi
new file mode 100644
index 000000000..007646fcb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sam9x60.dtsi
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for SAM9X60 SoC.
+ *
+ * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/at91.h>
+
+/{
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio3 = &pioD;
+		spi0 = &qspi;
+	};
+
+	clocks {
+		slow_rc_osc: slow_rc_osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <18500>;
+		};
+
+		main_rc: main_rc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sdhci0: sdhci-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdhci0>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				clocks =  <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 18>; /* ID_QSPI */
+				clock-names = "pclk", "qspick";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			flx0: flexcom@f801c600 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clock-names = "hclk", "pclk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				status = "disabled";
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+			};
+
+			pinctrl {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+				reg = <0xfffff400 0x200		/* pioA */
+				       0xfffff600 0x200		/* pioB */
+				       0xfffff800 0x200		/* pioC */
+				       0xfffffa00 0x200>;	/* pioD */
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+					};
+				};
+
+				sdhci0 {
+					pinctrl_sdhci0: sdhci0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A
+							 (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)	/* PA17 CK  periph A with pullup */
+							 AT91_PIOA 16 AT91_PERIPH_A
+							 (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)	/* PA16 CMD periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A
+							 (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)	/* PA15 DAT0 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A
+							 (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)	/* PA18 DAT1 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A
+							 (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)	/* PA19 DAT2 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A
+							 (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>;	/* PA20 DAT3 periph A with pullup */
+					};
+				};
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "microchip,sam9x60-pmc";
+				reg = <0xfffffc00 0x200>;
+				#clock-cells = <2>;
+				clocks = <&clk32 1>, <&clk32 0>, <&main_xtal>, <&main_rc>;
+				clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
+				status = "okay";
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE 11>; /* ID_MCK. */
+			};
+
+			clk32: sckc@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_rc_osc>, <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	onewire_tm: onewire {
+		compatible = "w1-gpio";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sam9x60ek-u-boot.dtsi b/roms/u-boot/arch/arm/dts/sam9x60ek-u-boot.dtsi
new file mode 100644
index 000000000..8c63ed869
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sam9x60ek-u-boot.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60-u-boot.dts - Device Tree file for SAM9X60 SoC.
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ */
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+	};
+
+	ahb {
+		u-boot,dm-pre-reloc;
+
+		apb {
+			u-boot,dm-pre-reloc;
+
+			pinctrl {
+				u-boot,dm-pre-reloc;
+			};
+		};
+	};
+};
+
+&clk32 {
+	u-boot,dm-pre-reloc;
+};
+
+&dbgu {
+	u-boot,dm-pre-reloc;
+};
+
+&main_rc {
+	u-boot,dm-pre-reloc;
+};
+
+&main_xtal {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_dbgu {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_sdhci0 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&pioA {
+	u-boot,dm-pre-reloc;
+};
+
+&pioB {
+	u-boot,dm-pre-reloc;
+};
+
+&pmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+};
+
+&slow_xtal {
+	u-boot,dm-pre-reloc;
+};
+
+&slow_rc_osc {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/sam9x60ek.dts b/roms/u-boot/arch/arm/dts/sam9x60ek.dts
new file mode 100644
index 000000000..96914b3ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sam9x60ek.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60ek.dts - Device Tree file for SAM9X60 EK board
+ *
+ * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <Sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+
+/ {
+	model = "Microchip SAM9X60-Ek";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+		i2c0 = &flx0;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal: main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	onewire_tm: onewire {
+		gpios = <&pioD 14 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_onewire_tm_default>;
+		status = "okay";
+
+		w1_eeprom: w1_eeprom@0 {
+			compatible = "maxim,ds24b33";
+			status = "okay";
+		};
+	};
+
+	ahb {
+		apb {
+			qspi: spi@f0014000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi>;
+				status = "okay";
+
+				nor_flash: sst26vf064@0 {
+					compatible = "spi-flash";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-rx-bus-width = <4>;
+					spi-tx-bus-width = <4>;
+				};
+			};
+
+			flx0: flexcom@f801c600 {
+				atmel,flexcom-mode = <3>;
+				status = "okay";
+
+				i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					status = "okay";
+
+					eeprom@53 {
+						compatible = "atmel,24c32";
+						reg = <0x53>;
+						pagesize = <16>;
+					};
+				};
+			};
+
+			pinctrl {
+					pinctrl_qspi: qspi {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_flx0: flx0_default {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_onewire_tm_default: onewire_tm_default {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d2-pinfunc.h b/roms/u-boot/arch/arm/dts/sama5d2-pinfunc.h
new file mode 100644
index 000000000..b0c912fea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d2-pinfunc.h
@@ -0,0 +1,880 @@
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__QSPI0_SCK		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__D0			PINMUX_PIN(PIN_PA0, 6, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__QSPI0_CS		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__D1			PINMUX_PIN(PIN_PA1, 6, 2)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_DAT0		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__QSPI0_IO0		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__D2			PINMUX_PIN(PIN_PA2, 6, 2)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT1		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__QSPI0_IO1		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D3			PINMUX_PIN(PIN_PA3, 6, 2)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT2		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__QSPI0_IO2		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D4			PINMUX_PIN(PIN_PA4, 6, 2)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT3		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__QSPI0_IO3		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__D5			PINMUX_PIN(PIN_PA5, 6, 2)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT4		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__QSPI1_SCK		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__TIOA5			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA6, 5, 1)
+#define PIN_PA6__D6			PINMUX_PIN(PIN_PA6, 6, 2)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT5		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__QSPI1_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__TIOB5			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA7, 5, 1)
+#define PIN_PA7__D7			PINMUX_PIN(PIN_PA7, 6, 2)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT6		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__QSPI1_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__TCLK5			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA8, 5, 1)
+#define PIN_PA8__NWE_NANDWE		PINMUX_PIN(PIN_PA8, 6, 2)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT7		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__QSPI1_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__TIOA4			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__NCS3			PINMUX_PIN(PIN_PA9, 6, 2)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_RSTN		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__QSPI1_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__TIOB4			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__A21_NANDALE		PINMUX_PIN(PIN_PA10, 6, 2)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_VDDSEL		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__QSPI1_CS		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__TCLK4			PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__A22_NANDCLE		PINMUX_PIN(PIN_PA11, 6, 2)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__IRQ			PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD_NANDOE		PINMUX_PIN(PIN_PA12, 6, 2)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_CD		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA13, 5, 1)
+#define PIN_PA13__D8			PINMUX_PIN(PIN_PA13, 6, 2)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SPI0_SPCK		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__TK1			PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__QSPI0_SCK		PINMUX_PIN(PIN_PA14, 3, 2)
+#define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
+#define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
+#define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__QSPI0_CS		PINMUX_PIN(PIN_PA15, 3, 2)
+#define PIN_PA15__I2SC1_CK		PINMUX_PIN(PIN_PA15, 4, 2)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA15__D10			PINMUX_PIN(PIN_PA15, 6, 2)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__SPI0_MISO		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__TD1			PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__QSPI0_IO0		PINMUX_PIN(PIN_PA16, 3, 2)
+#define PIN_PA16__I2SC1_WS		PINMUX_PIN(PIN_PA16, 4, 2)
+#define PIN_PA16__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA16__D11			PINMUX_PIN(PIN_PA16, 6, 2)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__SPI0_NPCS0		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__RD1			PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__QSPI0_IO1		PINMUX_PIN(PIN_PA17, 3, 2)
+#define PIN_PA17__I2SC1_DI0		PINMUX_PIN(PIN_PA17, 4, 2)
+#define PIN_PA17__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA17__D12			PINMUX_PIN(PIN_PA17, 6, 2)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__SPI0_NPCS1		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__RK1			PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__QSPI0_IO2		PINMUX_PIN(PIN_PA18, 3, 2)
+#define PIN_PA18__I2SC1_DO0		PINMUX_PIN(PIN_PA18, 4, 2)
+#define PIN_PA18__SDMMC1_DAT0		PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA18__D13			PINMUX_PIN(PIN_PA18, 6, 2)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__SPI0_NPCS2		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__RF1			PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__QSPI0_IO3		PINMUX_PIN(PIN_PA19, 3, 2)
+#define PIN_PA19__TIOA0			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__SDMMC1_DAT1		PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA19__D14			PINMUX_PIN(PIN_PA19, 6, 2)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__SPI0_NPCS3		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__TIOB0			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__SDMMC1_DAT2		PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA20__D15			PINMUX_PIN(PIN_PA20, 6, 2)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__IRQ			PINMUX_PIN(PIN_PA21, 1, 2)
+#define PIN_PA21__PCK2			PINMUX_PIN(PIN_PA21, 2, 3)
+#define PIN_PA21__TCLK0			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__SDMMC1_DAT3		PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA21__NANDRDY		PINMUX_PIN(PIN_PA21, 6, 2)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__D0			PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__TCK			PINMUX_PIN(PIN_PA22, 3, 4)
+#define PIN_PA22__SPI1_SPCK		PINMUX_PIN(PIN_PA22, 4, 2)
+#define PIN_PA22__SDMMC1_CK		PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA22__QSPI0_SCK		PINMUX_PIN(PIN_PA22, 6, 3)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__D1			PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__TDI			PINMUX_PIN(PIN_PA23, 3, 4)
+#define PIN_PA23__SPI1_MOSI		PINMUX_PIN(PIN_PA23, 4, 2)
+#define PIN_PA23__QSPI0_CS		PINMUX_PIN(PIN_PA23, 6, 3)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__D2			PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__TDO			PINMUX_PIN(PIN_PA24, 3, 4)
+#define PIN_PA24__SPI1_MISO		PINMUX_PIN(PIN_PA24, 4, 2)
+#define PIN_PA24__QSPI0_IO0		PINMUX_PIN(PIN_PA24, 6, 3)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__D3			PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__TMS			PINMUX_PIN(PIN_PA25, 3, 4)
+#define PIN_PA25__SPI1_NPCS0		PINMUX_PIN(PIN_PA25, 4, 2)
+#define PIN_PA25__QSPI0_IO1		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__D4			PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__NTRST			PINMUX_PIN(PIN_PA26, 3, 4)
+#define PIN_PA26__SPI1_NPCS1		PINMUX_PIN(PIN_PA26, 4, 2)
+#define PIN_PA26__QSPI0_IO2		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__TIOA1			PINMUX_PIN(PIN_PA27, 1, 2)
+#define PIN_PA27__D5			PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__SPI0_NPCS2		PINMUX_PIN(PIN_PA27, 3, 2)
+#define PIN_PA27__SPI1_NPCS2		PINMUX_PIN(PIN_PA27, 4, 2)
+#define PIN_PA27__SDMMC1_RSTN		PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__QSPI0_IO3		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__TIOB1			PINMUX_PIN(PIN_PA28, 1, 2)
+#define PIN_PA28__D6			PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__SPI0_NPCS3		PINMUX_PIN(PIN_PA28, 3, 2)
+#define PIN_PA28__SPI1_NPCS3		PINMUX_PIN(PIN_PA28, 4, 2)
+#define PIN_PA28__SDMMC1_CMD		PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__CLASSD_L0		PINMUX_PIN(PIN_PA28, 6, 1)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__TCLK1			PINMUX_PIN(PIN_PA29, 1, 2)
+#define PIN_PA29__D7			PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__SPI0_NPCS1		PINMUX_PIN(PIN_PA29, 3, 2)
+#define PIN_PA29__SDMMC1_WP		PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__CLASSD_L1		PINMUX_PIN(PIN_PA29, 6, 1)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__NWE_NANDWE		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__SPI0_NPCS0		PINMUX_PIN(PIN_PA30, 3, 2)
+#define PIN_PA30__PWMH0			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__SDMMC1_CD		PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__CLASSD_L2		PINMUX_PIN(PIN_PA30, 6, 1)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__NCS3			PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__SPI0_MISO		PINMUX_PIN(PIN_PA31, 3, 2)
+#define PIN_PA31__PWML0			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__CLASSD_L3		PINMUX_PIN(PIN_PA31, 6, 1)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__A21_NANDALE		PINMUX_PIN(PIN_PB0, 2, 1)
+#define PIN_PB0__SPI0_MOSI		PINMUX_PIN(PIN_PB0, 3, 2)
+#define PIN_PB0__PWMH1			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__A22_NANDCLE		PINMUX_PIN(PIN_PB1, 2, 1)
+#define PIN_PB1__SPI0_SPCK		PINMUX_PIN(PIN_PB1, 3, 2)
+#define PIN_PB1__PWML1			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__CLASSD_R0		PINMUX_PIN(PIN_PB1, 6, 1)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__NRD_NANDOE		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__PWMFI0			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__CLASSD_R1		PINMUX_PIN(PIN_PB2, 6, 1)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__URXD4			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__IRQ			PINMUX_PIN(PIN_PB3, 3, 3)
+#define PIN_PB3__PWMEXTRG0		PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB3__CLASSD_R2		PINMUX_PIN(PIN_PB3, 6, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__UTXD4			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__FIQ			PINMUX_PIN(PIN_PB4, 3, 4)
+#define PIN_PB4__CLASSD_R3		PINMUX_PIN(PIN_PB4, 6, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TCLK2			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PWMH2			PINMUX_PIN(PIN_PB5, 3, 1)
+#define PIN_PB5__QSPI1_SCK		PINMUX_PIN(PIN_PB5, 4, 2)
+#define PIN_PB5__GTSUCOMP		PINMUX_PIN(PIN_PB5, 6, 3)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__TIOA2			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PWML2			PINMUX_PIN(PIN_PB6, 3, 1)
+#define PIN_PB6__QSPI1_CS		PINMUX_PIN(PIN_PB6, 4, 2)
+#define PIN_PB6__GTXER			PINMUX_PIN(PIN_PB6, 6, 3)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TIOB2			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__PWMH3			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__QSPI1_IO0		PINMUX_PIN(PIN_PB7, 4, 2)
+#define PIN_PB7__GRXCK			PINMUX_PIN(PIN_PB7, 6, 3)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__TCLK3			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__PWML3			PINMUX_PIN(PIN_PB8, 3, 1)
+#define PIN_PB8__QSPI1_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+#define PIN_PB8__GCRS			PINMUX_PIN(PIN_PB8, 6, 3)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__TIOA3			PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__D14			PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PWMFI1			PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__QSPI1_IO2		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__GCOL			PINMUX_PIN(PIN_PB9, 6, 3)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__TIOB3			PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__D15			PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__QSPI1_IO3		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__GRX2			PINMUX_PIN(PIN_PB10, 6, 3)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__LCDDAT0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__A0_NBS0		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__URXD3			PINMUX_PIN(PIN_PB11, 3, 3)
+#define PIN_PB11__PDMIC_DAT		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__GRX3			PINMUX_PIN(PIN_PB11, 6, 3)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__LCDDAT1		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__A1			PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__UTXD3			PINMUX_PIN(PIN_PB12, 3, 3)
+#define PIN_PB12__PDMIC_CLK		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__GTX2			PINMUX_PIN(PIN_PB12, 6, 3)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__LCDDAT2		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__A2			PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__PCK1			PINMUX_PIN(PIN_PB13, 3, 3)
+#define PIN_PB13__GTX3			PINMUX_PIN(PIN_PB13, 6, 3)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__LCDDAT3		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__A3			PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__TK1			PINMUX_PIN(PIN_PB14, 3, 2)
+#define PIN_PB14__I2SC1_MCK		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 5, 3)
+#define PIN_PB14__GTXCK			PINMUX_PIN(PIN_PB14, 6, 3)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__LCDDAT4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__A4			PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__TF1			PINMUX_PIN(PIN_PB15, 3, 2)
+#define PIN_PB15__I2SC1_CK		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__QSPI1_CS		PINMUX_PIN(PIN_PB15, 5, 3)
+#define PIN_PB15__GTXEN			PINMUX_PIN(PIN_PB15, 6, 3)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__LCDDAT5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__A5			PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__TD1			PINMUX_PIN(PIN_PB16, 3, 2)
+#define PIN_PB16__I2SC1_WS		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__QSPI1_IO0		PINMUX_PIN(PIN_PB16, 5, 3)
+#define PIN_PB16__GRXDV			PINMUX_PIN(PIN_PB16, 6, 3)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__LCDDAT6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__A6			PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__RD1			PINMUX_PIN(PIN_PB17, 3, 2)
+#define PIN_PB17__I2SC1_DI0		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__QSPI1_IO1		PINMUX_PIN(PIN_PB17, 5, 3)
+#define PIN_PB17__GRXER			PINMUX_PIN(PIN_PB17, 6, 3)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__LCDDAT7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__A7			PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__RK1			PINMUX_PIN(PIN_PB18, 3, 2)
+#define PIN_PB18__I2SC1_DO0		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__QSPI1_IO2		PINMUX_PIN(PIN_PB18, 5, 3)
+#define PIN_PB18__GRX0			PINMUX_PIN(PIN_PB18, 6, 3)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__LCDDAT8		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__A8			PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__RF1			PINMUX_PIN(PIN_PB19, 3, 2)
+#define PIN_PB19__TIOA3			PINMUX_PIN(PIN_PB19, 4, 2)
+#define PIN_PB19__QSPI1_IO3		PINMUX_PIN(PIN_PB19, 5, 3)
+#define PIN_PB19__GRX1			PINMUX_PIN(PIN_PB19, 6, 3)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__LCDDAT9		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__A9			PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__TK0			PINMUX_PIN(PIN_PB20, 3, 1)
+#define PIN_PB20__TIOB3			PINMUX_PIN(PIN_PB20, 4, 2)
+#define PIN_PB20__PCK1			PINMUX_PIN(PIN_PB20, 5, 4)
+#define PIN_PB20__GTX0			PINMUX_PIN(PIN_PB20, 6, 3)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__LCDDAT10		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__A10			PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__TF0			PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__TCLK3			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB21, 5, 3)
+#define PIN_PB21__GTX1			PINMUX_PIN(PIN_PB21, 6, 3)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__LCDDAT11		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__A11			PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__TDO			PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TIOA2			PINMUX_PIN(PIN_PB22, 4, 2)
+#define PIN_PB22__FLEXCOM3_IO1		PINMUX_PIN(PIN_PB22, 5, 3)
+#define PIN_PB22__GMDC			PINMUX_PIN(PIN_PB22, 6, 3)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__LCDDAT12		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__A12			PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__RD0			PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__TIOB2			PINMUX_PIN(PIN_PB23, 4, 2)
+#define PIN_PB23__FLEXCOM3_IO0		PINMUX_PIN(PIN_PB23, 5, 3)
+#define PIN_PB23__GMDIO			PINMUX_PIN(PIN_PB23, 6, 3)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__LCDDAT13		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__A13			PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__RK0			PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__TCLK2			PINMUX_PIN(PIN_PB24, 4, 2)
+#define PIN_PB24__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB24, 5, 3)
+#define PIN_PB24__ISC_D10		PINMUX_PIN(PIN_PB24, 6, 3)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__LCDDAT14		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__A14			PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__RF0			PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB25, 5, 3)
+#define PIN_PB25__ISC_D11		PINMUX_PIN(PIN_PB25, 6, 3)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__LCDDAT15		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__A15			PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__URXD0			PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PDMIC_DAT		PINMUX_PIN(PIN_PB26, 4, 1)
+#define PIN_PB26__ISC_D0		PINMUX_PIN(PIN_PB26, 6, 3)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__LCDDAT16		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__A16			PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__UTXD0			PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PDMIC_CLK		PINMUX_PIN(PIN_PB27, 4, 1)
+#define PIN_PB27__ISC_D1		PINMUX_PIN(PIN_PB27, 6, 3)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__LCDDAT17		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__A17			PINMUX_PIN(PIN_PB28, 2, 1)
+#define PIN_PB28__FLEXCOM0_IO0		PINMUX_PIN(PIN_PB28, 3, 1)
+#define PIN_PB28__TIOA5			PINMUX_PIN(PIN_PB28, 4, 2)
+#define PIN_PB28__ISC_D2		PINMUX_PIN(PIN_PB28, 6, 3)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__LCDDAT18		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__A18			PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM0_IO1		PINMUX_PIN(PIN_PB29, 3, 1)
+#define PIN_PB29__TIOB5			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__ISC_D3		PINMUX_PIN(PIN_PB29, 7, 3)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__LCDDAT19		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__A19			PINMUX_PIN(PIN_PB30, 2, 1)
+#define PIN_PB30__FLEXCOM0_IO2		PINMUX_PIN(PIN_PB30, 3, 1)
+#define PIN_PB30__TCLK5			PINMUX_PIN(PIN_PB30, 4, 2)
+#define PIN_PB30__ISC_D4		PINMUX_PIN(PIN_PB30, 6, 3)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__LCDDAT20		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__A20			PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM0_IO3		PINMUX_PIN(PIN_PB31, 3, 1)
+#define PIN_PB31__TWD0			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__ISC_D5		PINMUX_PIN(PIN_PB31, 6, 3)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__LCDDAT21		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__A23			PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC0, 3, 1)
+#define PIN_PC0__TWCK0			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__ISC_D6			PINMUX_PIN(PIN_PC0, 6, 3)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__LCDDAT22		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__A24			PINMUX_PIN(PIN_PC1, 2, 1)
+#define PIN_PC1__CANTX0			PINMUX_PIN(PIN_PC1, 3, 1)
+#define PIN_PC1__SPI1_SPCK		PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__I2SC0_CK		PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__ISC_D7			PINMUX_PIN(PIN_PC1, 6, 3)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__LCDDAT23		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__A25			PINMUX_PIN(PIN_PC2, 2, 1)
+#define PIN_PC2__CANRX0			PINMUX_PIN(PIN_PC2, 3, 1)
+#define PIN_PC2__SPI1_MOSI		PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__I2SC0_MCK		PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__ISC_D8			PINMUX_PIN(PIN_PC2, 6, 3)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__LCDPWM			PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__NWAIT			PINMUX_PIN(PIN_PC3, 2, 1)
+#define PIN_PC3__TIOA1			PINMUX_PIN(PIN_PC3, 3, 1)
+#define PIN_PC3__SPI1_MISO		PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__I2SC0_WS		PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__ISC_D9			PINMUX_PIN(PIN_PC3, 6, 3)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__LCDDISP		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__NWR1_NBS1		PINMUX_PIN(PIN_PC4, 2, 1)
+#define PIN_PC4__TIOB1			PINMUX_PIN(PIN_PC4, 3, 1)
+#define PIN_PC4__SPI1_NPCS0		PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__I2SC0_DI0		PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__ISC_PCK		PINMUX_PIN(PIN_PC4, 6, 3)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__LCDVSYNC		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__NCS0			PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__TCLK1			PINMUX_PIN(PIN_PC5, 3, 1)
+#define PIN_PC5__SPI1_NPCS1		PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__I2SC0_DO0		PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__ISC_VSYNC		PINMUX_PIN(PIN_PC5, 6, 3)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__LCDHSYNC		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__NCS1			PINMUX_PIN(PIN_PC6, 2, 1)
+#define PIN_PC6__TWD1			PINMUX_PIN(PIN_PC6, 3, 1)
+#define PIN_PC6__SPI1_NPCS2		PINMUX_PIN(PIN_PC6, 4, 1)
+#define PIN_PC6__ISC_HSYNC		PINMUX_PIN(PIN_PC6, 6, 3)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__LCDPCK			PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__NCS2			PINMUX_PIN(PIN_PC7, 2, 1)
+#define PIN_PC7__TWCK1			PINMUX_PIN(PIN_PC7, 3, 1)
+#define PIN_PC7__SPI1_NPCS3		PINMUX_PIN(PIN_PC7, 4, 1)
+#define PIN_PC7__URXD1			PINMUX_PIN(PIN_PC7, 5, 2)
+#define PIN_PC7__ISC_MCK		PINMUX_PIN(PIN_PC7, 6, 3)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__LCDDEN			PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__NANDRDY		PINMUX_PIN(PIN_PC8, 2, 1)
+#define PIN_PC8__FIQ			PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__PCK0			PINMUX_PIN(PIN_PC8, 4, 3)
+#define PIN_PC8__UTXD1			PINMUX_PIN(PIN_PC8, 5, 2)
+#define PIN_PC8__ISC_FIELD		PINMUX_PIN(PIN_PC8, 6, 3)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__FIQ			PINMUX_PIN(PIN_PC9, 1, 3)
+#define PIN_PC9__GTSUCOMP		PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__TIOA4			PINMUX_PIN(PIN_PC9, 4, 2)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__LCDDAT2		PINMUX_PIN(PIN_PC10, 1, 2)
+#define PIN_PC10__GTXCK			PINMUX_PIN(PIN_PC10, 2, 1)
+#define PIN_PC10__ISC_D1		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__TIOB4			PINMUX_PIN(PIN_PC10, 4, 2)
+#define PIN_PC10__CANTX0		PINMUX_PIN(PIN_PC10, 5, 2)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__LCDDAT3		PINMUX_PIN(PIN_PC11, 1, 2)
+#define PIN_PC11__GTXEN			PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__ISC_D2		PINMUX_PIN(PIN_PC11, 3, 1)
+#define PIN_PC11__TCLK4			PINMUX_PIN(PIN_PC11, 4, 2)
+#define PIN_PC11__CANRX0		PINMUX_PIN(PIN_PC11, 5, 2)
+#define PIN_PC11__A0_NBS0		PINMUX_PIN(PIN_PC11, 6, 2)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__LCDDAT4		PINMUX_PIN(PIN_PC12, 1, 2)
+#define PIN_PC12__GRXDV			PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__ISC_D3		PINMUX_PIN(PIN_PC12, 3, 1)
+#define PIN_PC12__URXD3			PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__TK0			PINMUX_PIN(PIN_PC12, 5, 2)
+#define PIN_PC12__A1			PINMUX_PIN(PIN_PC12, 6, 2)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__LCDDAT5		PINMUX_PIN(PIN_PC13, 1, 2)
+#define PIN_PC13__GRXER			PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__ISC_D4		PINMUX_PIN(PIN_PC13, 3, 1)
+#define PIN_PC13__UTXD3			PINMUX_PIN(PIN_PC13, 4, 1)
+#define PIN_PC13__TF0			PINMUX_PIN(PIN_PC13, 5, 2)
+#define PIN_PC13__A2			PINMUX_PIN(PIN_PC13, 6, 2)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__LCDDAT6		PINMUX_PIN(PIN_PC14, 1, 2)
+#define PIN_PC14__GRX0			PINMUX_PIN(PIN_PC14, 2, 1)
+#define PIN_PC14__ISC_D5		PINMUX_PIN(PIN_PC14, 3, 1)
+#define PIN_PC14__TDO			PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__A3			PINMUX_PIN(PIN_PC14, 6, 2)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__LCDDAT7		PINMUX_PIN(PIN_PC15, 1, 2)
+#define PIN_PC15__GRX1			PINMUX_PIN(PIN_PC15, 2, 1)
+#define PIN_PC15__ISC_D6		PINMUX_PIN(PIN_PC15, 3, 1)
+#define PIN_PC15__RD0			PINMUX_PIN(PIN_PC15, 5, 2)
+#define PIN_PC15__A4			PINMUX_PIN(PIN_PC15, 6, 2)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__LCDDAT10		PINMUX_PIN(PIN_PC16, 1, 2)
+#define PIN_PC16__GTX0			PINMUX_PIN(PIN_PC16, 2, 1)
+#define PIN_PC16__ISC_D7		PINMUX_PIN(PIN_PC16, 3, 1)
+#define PIN_PC16__RK0			PINMUX_PIN(PIN_PC16, 5, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 6, 2)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__LCDDAT11		PINMUX_PIN(PIN_PC17, 1, 2)
+#define PIN_PC17__GTX1			PINMUX_PIN(PIN_PC17, 2, 1)
+#define PIN_PC17__ISC_D8		PINMUX_PIN(PIN_PC17, 3, 1)
+#define PIN_PC17__RF0			PINMUX_PIN(PIN_PC17, 5, 2)
+#define PIN_PC17__A6			PINMUX_PIN(PIN_PC17, 6, 2)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__LCDDAT12		PINMUX_PIN(PIN_PC18, 1, 2)
+#define PIN_PC18__GMDC			PINMUX_PIN(PIN_PC18, 2, 1)
+#define PIN_PC18__ISC_D9		PINMUX_PIN(PIN_PC18, 3, 1)
+#define PIN_PC18__FLEXCOM3_IO2		PINMUX_PIN(PIN_PC18, 5, 2)
+#define PIN_PC18__A7			PINMUX_PIN(PIN_PC18, 6, 2)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__LCDDAT13		PINMUX_PIN(PIN_PC19, 1, 2)
+#define PIN_PC19__GMDIO			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__ISC_D10		PINMUX_PIN(PIN_PC19, 3, 1)
+#define PIN_PC19__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC19, 5, 2)
+#define PIN_PC19__A8			PINMUX_PIN(PIN_PC19, 6, 2)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__LCDDAT14		PINMUX_PIN(PIN_PC20, 1, 2)
+#define PIN_PC20__GRXCK			PINMUX_PIN(PIN_PC20, 2, 1)
+#define PIN_PC20__ISC_D11		PINMUX_PIN(PIN_PC20, 3, 1)
+#define PIN_PC20__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC20, 5, 2)
+#define PIN_PC20__A9			PINMUX_PIN(PIN_PC20, 6, 2)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__LCDDAT15		PINMUX_PIN(PIN_PC21, 1, 2)
+#define PIN_PC21__GTXER			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__ISC_PCK		PINMUX_PIN(PIN_PC21, 3, 1)
+#define PIN_PC21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PC21, 5, 2)
+#define PIN_PC21__A10			PINMUX_PIN(PIN_PC21, 6, 2)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__LCDDAT18		PINMUX_PIN(PIN_PC22, 1, 2)
+#define PIN_PC22__GCRS			PINMUX_PIN(PIN_PC22, 2, 1)
+#define PIN_PC22__ISC_VSYNC		PINMUX_PIN(PIN_PC22, 3, 1)
+#define PIN_PC22__FLEXCOM3_IO4		PINMUX_PIN(PIN_PC22, 5, 2)
+#define PIN_PC22__A11			PINMUX_PIN(PIN_PC22, 6, 2)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__LCDDAT19		PINMUX_PIN(PIN_PC23, 1, 2)
+#define PIN_PC23__GCOL			PINMUX_PIN(PIN_PC23, 2, 1)
+#define PIN_PC23__ISC_HSYNC		PINMUX_PIN(PIN_PC23, 3, 1)
+#define PIN_PC23__A12			PINMUX_PIN(PIN_PC23, 6, 2)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__LCDDAT20		PINMUX_PIN(PIN_PC24, 1, 2)
+#define PIN_PC24__GRX2			PINMUX_PIN(PIN_PC24, 2, 1)
+#define PIN_PC24__ISC_MCK		PINMUX_PIN(PIN_PC24, 3, 1)
+#define PIN_PC24__A13			PINMUX_PIN(PIN_PC24, 6, 2)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__LCDDAT21		PINMUX_PIN(PIN_PC25, 1, 2)
+#define PIN_PC25__GRX3			PINMUX_PIN(PIN_PC25, 2, 1)
+#define PIN_PC25__ISC_FIELD		PINMUX_PIN(PIN_PC25, 3, 1)
+#define PIN_PC25__A14			PINMUX_PIN(PIN_PC25, 6, 2)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__LCDDAT22		PINMUX_PIN(PIN_PC26, 1, 2)
+#define PIN_PC26__GTX2			PINMUX_PIN(PIN_PC26, 2, 1)
+#define PIN_PC26__CANTX1		PINMUX_PIN(PIN_PC26, 4, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 6, 2)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__LCDDAT23		PINMUX_PIN(PIN_PC27, 1, 2)
+#define PIN_PC27__GTX3			PINMUX_PIN(PIN_PC27, 2, 1)
+#define PIN_PC27__PCK1			PINMUX_PIN(PIN_PC27, 3, 2)
+#define PIN_PC27__CANRX1		PINMUX_PIN(PIN_PC27, 4, 1)
+#define PIN_PC27__TWD0			PINMUX_PIN(PIN_PC27, 5, 2)
+#define PIN_PC27__A16			PINMUX_PIN(PIN_PC27, 6, 2)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__LCDPWM		PINMUX_PIN(PIN_PC28, 1, 2)
+#define PIN_PC28__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC28, 2, 1)
+#define PIN_PC28__PCK2			PINMUX_PIN(PIN_PC28, 3, 2)
+#define PIN_PC28__TWCK0			PINMUX_PIN(PIN_PC28, 5, 2)
+#define PIN_PC28__A17			PINMUX_PIN(PIN_PC28, 6, 2)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__LCDDISP		PINMUX_PIN(PIN_PC29, 1, 2)
+#define PIN_PC29__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC29, 2, 1)
+#define PIN_PC29__A18			PINMUX_PIN(PIN_PC29, 6, 2)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__LCDVSYNC		PINMUX_PIN(PIN_PC30, 1, 2)
+#define PIN_PC30__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC30, 2, 1)
+#define PIN_PC30__A19			PINMUX_PIN(PIN_PC30, 6, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__LCDHSYNC		PINMUX_PIN(PIN_PC31, 1, 2)
+#define PIN_PC31__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC31, 2, 1)
+#define PIN_PC31__URXD3			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__A20			PINMUX_PIN(PIN_PC31, 6, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__LCDPCK			PINMUX_PIN(PIN_PD0, 1, 2)
+#define PIN_PD0__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD0, 2, 1)
+#define PIN_PD0__UTXD3			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__GTSUCOMP		PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__A23			PINMUX_PIN(PIN_PD0, 6, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__LCDDEN			PINMUX_PIN(PIN_PD1, 1, 2)
+#define PIN_PD1__GRXCK			PINMUX_PIN(PIN_PD1, 4, 2)
+#define PIN_PD1__A24			PINMUX_PIN(PIN_PD1, 6, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__URXD1			PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__GTXER			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__ISC_MCK		PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__A25			PINMUX_PIN(PIN_PD2, 6, 2)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__UTXD1			PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FIQ			PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__GCRS			PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__ISC_D11		PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__NWAIT			PINMUX_PIN(PIN_PD3, 6, 2)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__TWD1			PINMUX_PIN(PIN_PD4, 1, 2)
+#define PIN_PD4__URXD2			PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__GCOL			PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__ISC_D10		PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__NCS0			PINMUX_PIN(PIN_PD4, 6, 2)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__TWCK1			PINMUX_PIN(PIN_PD5, 1, 2)
+#define PIN_PD5__UTXD2			PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__GRX2			PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__ISC_D9			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__NCS1			PINMUX_PIN(PIN_PD5, 6, 2)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__TCK			PINMUX_PIN(PIN_PD6, 1, 2)
+#define PIN_PD6__PCK1			PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__GRX3			PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__ISC_D8			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__NCS2			PINMUX_PIN(PIN_PD6, 6, 2)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__TDI			PINMUX_PIN(PIN_PD7, 1, 2)
+#define PIN_PD7__UTMI_RXVAL		PINMUX_PIN(PIN_PD7, 3, 1)
+#define PIN_PD7__GTX2			PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__ISC_D0			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__NWR1_NBS1		PINMUX_PIN(PIN_PD7, 6, 2)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__TDO			PINMUX_PIN(PIN_PD8, 1, 2)
+#define PIN_PD8__UTMI_RXERR		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__GTX3			PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__ISC_D1			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__NANDRDY		PINMUX_PIN(PIN_PD8, 6, 2)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__TMS			PINMUX_PIN(PIN_PD9, 1, 2)
+#define PIN_PD9__UTMI_RXACT		PINMUX_PIN(PIN_PD9, 3, 1)
+#define PIN_PD9__GTXCK			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__ISC_D2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__NTRST			PINMUX_PIN(PIN_PD10, 1, 2)
+#define PIN_PD10__UTMI_HDIS		PINMUX_PIN(PIN_PD10, 3, 1)
+#define PIN_PD10__GTXEN			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__ISC_D3		PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__TIOA1			PINMUX_PIN(PIN_PD11, 1, 3)
+#define PIN_PD11__PCK2			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__UTMI_LS0		PINMUX_PIN(PIN_PD11, 3, 1)
+#define PIN_PD11__GRXDV			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__ISC_D4		PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__ISC_MCK		PINMUX_PIN(PIN_PD11, 7, 4)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 1, 3)
+#define PIN_PD12__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__UTMI_LS1		PINMUX_PIN(PIN_PD12, 3, 1)
+#define PIN_PD12__GRXER			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__ISC_D5		PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD12__ISC_D4		PINMUX_PIN(PIN_PD12, 6, 4)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__TCLK1			PINMUX_PIN(PIN_PD13, 1, 3)
+#define PIN_PD13__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__UTMI_CDRPCSEL0	PINMUX_PIN(PIN_PD13, 3, 1)
+#define PIN_PD13__GRX0			PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__ISC_D6		PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD13__ISC_D5		PINMUX_PIN(PIN_PD13, 6, 4)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__TCK			PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__UTMI_CDRPCSEL1	PINMUX_PIN(PIN_PD14, 3, 1)
+#define PIN_PD14__GRX1			PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__ISC_D7		PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__ISC_D6		PINMUX_PIN(PIN_PD14, 6, 4)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__TDI			PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__UTMI_CDRCPDIVEN	PINMUX_PIN(PIN_PD15, 3, 1)
+#define PIN_PD15__GTX0			PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__ISC_PCK		PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__ISC_D7		PINMUX_PIN(PIN_PD15, 6, 4)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__TDO			PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__UTMI_CDRBISTEN	PINMUX_PIN(PIN_PD16, 3, 1)
+#define PIN_PD16__GTX1			PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__ISC_VSYNC		PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__ISC_D8		PINMUX_PIN(PIN_PD16, 6, 4)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__TMS			PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__UTMI_CDRCPSELDIV	PINMUX_PIN(PIN_PD17, 3, 1)
+#define PIN_PD17__GMDC			PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__ISC_HSYNC		PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__ISC_D9		PINMUX_PIN(PIN_PD17, 6, 4)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__NTRST			PINMUX_PIN(PIN_PD18, 1, 1)
+#define PIN_PD18__GMDIO			PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__ISC_FIELD		PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__ISC_D10		PINMUX_PIN(PIN_PD18, 6, 4)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__PCK0			PINMUX_PIN(PIN_PD19, 1, 1)
+#define PIN_PD19__TWD1			PINMUX_PIN(PIN_PD19, 2, 3)
+#define PIN_PD19__URXD2			PINMUX_PIN(PIN_PD19, 3, 3)
+#define PIN_PD19__I2SC0_CK		PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__ISC_D11		PINMUX_PIN(PIN_PD19, 6, 4)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__TIOA2			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__TWCK1			PINMUX_PIN(PIN_PD20, 2, 3)
+#define PIN_PD20__UTXD2			PINMUX_PIN(PIN_PD20, 3, 3)
+#define PIN_PD20__I2SC0_MCK		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__ISC_PCK		PINMUX_PIN(PIN_PD20, 6, 4)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__TIOB2			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__TWD0			PINMUX_PIN(PIN_PD21, 2, 4)
+#define PIN_PD21__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD21, 3, 3)
+#define PIN_PD21__I2SC0_WS		PINMUX_PIN(PIN_PD21, 5, 2)
+#define PIN_PD21__ISC_VSYNC		PINMUX_PIN(PIN_PD21, 6, 4)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__TCLK2			PINMUX_PIN(PIN_PD22, 1, 3)
+#define PIN_PD22__TWCK0			PINMUX_PIN(PIN_PD22, 2, 4)
+#define PIN_PD22__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD22, 3, 3)
+#define PIN_PD22__I2SC0_DI0		PINMUX_PIN(PIN_PD22, 5, 2)
+#define PIN_PD22__ISC_HSYNC		PINMUX_PIN(PIN_PD22, 6, 4)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__URXD2			PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD23__I2SC0_DO0		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__ISC_FIELD		PINMUX_PIN(PIN_PD23, 6, 4)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__UTXD2			PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__SPI1_SPCK		PINMUX_PIN(PIN_PD25, 1, 3)
+#define PIN_PD25__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD25, 3, 3)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__SPI1_MOSI		PINMUX_PIN(PIN_PD26, 1, 3)
+#define PIN_PD26__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD26, 3, 2)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__SPI1_MISO		PINMUX_PIN(PIN_PD27, 1, 3)
+#define PIN_PD27__TCK			PINMUX_PIN(PIN_PD27, 2, 3)
+#define PIN_PD27__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD27, 3, 2)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__SPI1_NPCS0		PINMUX_PIN(PIN_PD28, 1, 3)
+#define PIN_PD28__TCI			PINMUX_PIN(PIN_PD28, 2, 3)
+#define PIN_PD28__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD28, 3, 2)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__SPI1_NPCS1		PINMUX_PIN(PIN_PD29, 1, 3)
+#define PIN_PD29__TDO			PINMUX_PIN(PIN_PD29, 2, 3)
+#define PIN_PD29__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD29, 3, 2)
+#define PIN_PD29__TIOA3			PINMUX_PIN(PIN_PD29, 4, 3)
+#define PIN_PD29__TWD0			PINMUX_PIN(PIN_PD29, 5, 3)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__SPI1_NPCS2		PINMUX_PIN(PIN_PD30, 1, 3)
+#define PIN_PD30__TMS			PINMUX_PIN(PIN_PD30, 2, 3)
+#define PIN_PD30__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__TIOB3			PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__TWCK0			PINMUX_PIN(PIN_PD30, 5, 3)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__ADTRG			PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__NTRST			PINMUX_PIN(PIN_PD31, 2, 3)
+#define PIN_PD31__IRQ			PINMUX_PIN(PIN_PD31, 3, 4)
+#define PIN_PD31__TCLK3			PINMUX_PIN(PIN_PD31, 4, 3)
+#define PIN_PD31__PCK0			PINMUX_PIN(PIN_PD31, 5, 2)
diff --git a/roms/u-boot/arch/arm/dts/sama5d2.dtsi b/roms/u-boot/arch/arm/dts/sama5d2.dtsi
new file mode 100644
index 000000000..6fb2cb25f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d2.dtsi
@@ -0,0 +1,786 @@
+#include "skeleton.dtsi"
+
+/ {
+	model = "Atmel SAMA5D2 family SoC";
+	compatible = "atmel,sama5d2";
+
+	aliases {
+		spi0 = &spi0;
+		spi1 = &qspi0;
+		spi2 = &qspi1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		usb1: ohci@00400000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@00500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xa0000000 0x300>;
+			clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+			clock-names = "hclock", "multclk", "baseclk";
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xb0000000 0x300>;
+			clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+			clock-names = "hclock", "multclk", "baseclk";
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u-boot,dm-pre-reloc;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				clocks = <&lcdc_clk>;
+				status = "disabled";
+			};
+
+			pmc: pmc@f0014000 {
+				compatible = "atmel,sama5d2-pmc", "syscon";
+				reg = <0xf0014000 0x160>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					u-boot,dm-pre-reloc;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <12000000 12000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
+					u-boot,dm-pre-reloc;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				audio_pll_frac: audiopll_fracck {
+					compatible = "atmel,sama5d2-clk-audio-pll-frac";
+					#clock-cells = <0>;
+					clocks = <&main>;
+				};
+
+				audio_pll_pad: audiopll_padck {
+					compatible = "atmel,sama5d2-clk-audio-pll-pad";
+					#clock-cells = <0>;
+					clocks = <&audio_pll_frac>;
+				};
+
+				audio_pll_pmc: audiopll_pmcck {
+					compatible = "atmel,sama5d2-clk-audio-pll-pmc";
+					#clock-cells = <0>;
+					clocks = <&audio_pll_frac>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					clocks = <&main>;
+					regmap-sfr = <&sfr>;
+					u-boot,dm-pre-reloc;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					clocks = <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <124000000 166000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+					u-boot,dm-pre-reloc;
+				};
+
+				h32ck: h32mxck {
+					#clock-cells = <0>;
+					compatible = "atmel,sama5d4-clk-h32mx";
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+					};
+
+					prog2: prog@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+
+					iscck: iscck@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+						clocks = <&mck>;
+					};
+				};
+
+				periph32ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&h32ck>;
+					u-boot,dm-pre-reloc;
+
+					macb0_clk: macb0_clk@5 {
+						#clock-cells = <0>;
+						reg = <5>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tdes_clk: tdes_clk@11 {
+						#clock-cells = <0>;
+						reg = <11>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					matrix1_clk: matrix1_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					hsmc_clk: hsmc_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pioA_clk: pioA_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+						atmel,clk-output-range = <0 83000000>;
+						u-boot,dm-pre-reloc;
+					};
+
+					flx0_clk: flx0_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx1_clk: flx1_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx2_clk: flx2_clk@21 {
+						#clock-cells = <0>;
+						reg = <21>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx3_clk: flx3_clk@22 {
+						#clock-cells = <0>;
+						reg = <22>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx4_clk: flx4_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart0_clk: uart0_clk@24 {
+						#clock-cells = <0>;
+						reg = <24>;
+						atmel,clk-output-range = <0 83000000>;
+						u-boot,dm-pre-reloc;
+					};
+
+					uart1_clk: uart1_clk@25 {
+						#clock-cells = <0>;
+						reg = <25>;
+						atmel,clk-output-range = <0 83000000>;
+						u-boot,dm-pre-reloc;
+					};
+
+					uart2_clk: uart2_clk@26 {
+						#clock-cells = <0>;
+						reg = <26>;
+						atmel,clk-output-range = <0 83000000>;
+						u-boot,dm-pre-reloc;
+					};
+
+					uart3_clk: uart3_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart4_clk: uart4_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					twi0_clk: twi0_clk@29 {
+						reg = <29>;
+						#clock-cells = <0>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					twi1_clk: twi1_clk@30 {
+						#clock-cells = <0>;
+						reg = <30>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					spi0_clk: spi0_clk@33 {
+						#clock-cells = <0>;
+						reg = <33>;
+						atmel,clk-output-range = <0 83000000>;
+						u-boot,dm-pre-reloc;
+					};
+
+					spi1_clk: spi1_clk@34 {
+						#clock-cells = <0>;
+						reg = <34>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb0_clk: tcb0_clk@35 {
+						#clock-cells = <0>;
+						reg = <35>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb1_clk: tcb1_clk@36 {
+						#clock-cells = <0>;
+						reg = <36>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pwm_clk: pwm_clk@38 {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					adc_clk: adc_clk@40 {
+						#clock-cells = <0>;
+						reg = <40>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uhphs_clk: uhphs_clk@41 {
+						#clock-cells = <0>;
+						reg = <41>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					udphs_clk: udphs_clk@42 {
+						#clock-cells = <0>;
+						reg = <42>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					ssc0_clk: ssc0_clk@43 {
+						#clock-cells = <0>;
+						reg = <43>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					ssc1_clk: ssc1_clk@44 {
+						#clock-cells = <0>;
+						reg = <44>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					trng_clk: trng_clk@47 {
+						#clock-cells = <0>;
+						reg = <47>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pdmic_clk: pdmic_clk@48 {
+						#clock-cells = <0>;
+						reg = <48>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					i2s0_clk: i2s0_clk@54 {
+						#clock-cells = <0>;
+						reg = <54>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					i2s1_clk: i2s1_clk@55 {
+						#clock-cells = <0>;
+						reg = <55>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					can0_clk: can0_clk@56 {
+						#clock-cells = <0>;
+						reg = <56>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					can1_clk: can1_clk@57 {
+						#clock-cells = <0>;
+						reg = <57>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					classd_clk: classd_clk@59 {
+						#clock-cells = <0>;
+						reg = <59>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+				};
+
+				periph64ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+					dma0_clk: dma0_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					dma1_clk: dma1_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					aes_clk: aes_clk@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					aesb_clk: aesb_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					sha_clk: sha_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					mpddr_clk: mpddr_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					matrix0_clk: matrix0_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					sdmmc0_hclk: sdmmc0_hclk@31 {
+						#clock-cells = <0>;
+						reg = <31>;
+						u-boot,dm-pre-reloc;
+					};
+
+					sdmmc1_hclk: sdmmc1_hclk@32 {
+						#clock-cells = <0>;
+						reg = <32>;
+						u-boot,dm-pre-reloc;
+					};
+
+					lcdc_clk: lcdc_clk@45 {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					isc_clk: isc_clk@46 {
+						#clock-cells = <0>;
+						reg = <46>;
+					};
+
+					qspi0_clk: qspi0_clk@52 {
+						#clock-cells = <0>;
+						reg = <52>;
+						u-boot,dm-pre-reloc;
+					};
+
+					qspi1_clk: qspi1_clk@53 {
+						#clock-cells = <0>;
+						reg = <53>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+
+				gck {
+					compatible = "atmel,sama5d2-clk-generated";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&main>, <&plla>, <&utmi>, <&mck>;
+					u-boot,dm-pre-reloc;
+
+					sdmmc0_gclk: sdmmc0_gclk@31 {
+						#clock-cells = <0>;
+						reg = <31>;
+						u-boot,dm-pre-reloc;
+					};
+
+					sdmmc1_gclk: sdmmc1_gclk@32 {
+						#clock-cells = <0>;
+						reg = <32>;
+						u-boot,dm-pre-reloc;
+					};
+
+					tcb0_gclk: tcb0_gclk@35 {
+						#clock-cells = <0>;
+						reg = <35>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb1_gclk: tcb1_gclk@36 {
+						#clock-cells = <0>;
+						reg = <36>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pwm_gclk: pwm_gclk@38 {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pdmic_gclk: pdmic_gclk@48 {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+
+					i2s0_gclk: i2s0_gclk@54 {
+						#clock-cells = <0>;
+						reg = <54>;
+					};
+
+					i2s1_gclk: i2s1_gclk@55 {
+						#clock-cells = <0>;
+						reg = <55>;
+					};
+
+					can0_gclk: can0_gclk@56 {
+						#clock-cells = <0>;
+						reg = <56>;
+						atmel,clk-output-range = <0 80000000>;
+					};
+
+					can1_gclk: can1_gclk@57 {
+						#clock-cells = <0>;
+						reg = <57>;
+						atmel,clk-output-range = <0 80000000>;
+					};
+
+					classd_gclk: classd_gclk@59 {
+						#clock-cells = <0>;
+						reg = <59>;
+						atmel,clk-output-range = <0 100000000>;
+					};
+				};
+			};
+
+			qspi0: spi@f0020000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&qspi0_clk>;
+				status = "disabled";
+			};
+
+			qspi1: spi@f0024000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&qspi1_clk>;
+				status = "disabled";
+			};
+
+			spi0: spi@f8000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f8008000 {
+				compatible = "cdns,macb";
+				reg = <0xf8008000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			uart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x100>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				clocks = <&uart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xf8028000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			rstc@f8048000 {
+				compatible = "atmel,sama5d3-rstc";
+				reg = <0xf8048000 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shdwc@f8048010 {
+				compatible = "atmel,sama5d2-shdwc";
+				reg = <0xf8048010 0x10>;
+				clocks = <&clk32k>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+			};
+
+			pit: timer@f8048030 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xf8048030 0x10>;
+				clocks = <&h32ck>;
+			};
+
+			watchdog@f8048040 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xf8048040 0x10>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8030000 {
+				compatible = "atmel,sama5d2-sfr", "syscon";
+				reg = <0xf8030000 0x98>;
+			};
+
+			sckc@f8048050 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xf8048050 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <250000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			spi1: spi@fc000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc000000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				clocks = <&uart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart4: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				clocks = <&uart4_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c1: i2c@fc028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xfc028000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			pioA: gpio@fc038000 {
+				compatible = "atmel,sama5d2-gpio";
+				reg = <0xfc038000 0x600>;
+				clocks = <&pioA_clk>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				u-boot,dm-pre-reloc;
+
+				pinctrl {
+					compatible = "atmel,sama5d2-pinctrl";
+					u-boot,dm-pre-reloc;
+				};
+			};
+		};
+	};
+
+	onewire_tm: onewire {
+		compatible = "w1-gpio";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d27_som1.dtsi b/roms/u-boot/arch/arm/dts/sama5d27_som1.dtsi
new file mode 100644
index 000000000..ea7540bcf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d27_som1.dtsi
@@ -0,0 +1,158 @@
+/*
+ * sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SOM1
+ *
+ *  Copyright (C) 2017 Microchip Corporation
+ *                     Wenyou Yang <wenyou.yang@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+/ {
+	model = "Atmel SAMA5D27 SOM1 EK";
+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d2", "atmel,sama5";
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	aliases {
+		spi0 = &qspi1;
+	};
+
+	ahb {
+		apb {
+			qspi1: spi@f0024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi1_sck_cs_default &pinctrl_qspi1_dat_default>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				spi_flash@0 {
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+					spi-rx-bus-width = <4>;
+					spi-tx-bus-width = <4>;
+					u-boot,dm-pre-reloc;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			i2c0: i2c@f8028000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				status = "okay";
+
+				i2c_eeprom: i2c_eeprom@50 {
+					compatible = "microchip,24aa02e48";
+					reg = <0x50>;
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				status = "okay";
+			};
+
+			pioA: gpio@fc038000 {
+				pinctrl {
+					pinctrl_i2c0_default: i2c0_default {
+						pinmux = <PIN_PD21__TWD0>,
+							 <PIN_PD22__TWCK0>;
+						bias-disable;
+					};
+
+					pinctrl_i2c1_default: i2c1_default {
+						pinmux = <PIN_PD4__TWD1>,
+							 <PIN_PD5__TWCK1>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						pinmux = <PIN_PD31__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_rmii: macb0_rmii {
+						pinmux = <PIN_PD9__GTXCK>,
+							 <PIN_PD10__GTXEN>,
+							 <PIN_PD11__GRXDV>,
+							 <PIN_PD12__GRXER>,
+							 <PIN_PD13__GRX0>,
+							 <PIN_PD14__GRX1>,
+							 <PIN_PD15__GTX0>,
+							 <PIN_PD16__GTX1>,
+							 <PIN_PD17__GMDC>,
+							 <PIN_PD18__GMDIO>;
+						bias-disable;
+					};
+
+					pinctrl_qspi1_sck_cs_default: qspi1_sck_cs_default {
+						pinmux = <PIN_PB5__QSPI1_SCK>,
+							 <PIN_PB6__QSPI1_CS>;
+						bias-disable;
+						u-boot,dm-pre-reloc;
+					};
+
+					pinctrl_qspi1_dat_default: qspi1_dat_default {
+						pinmux = <PIN_PB7__QSPI1_IO0>,
+							 <PIN_PB8__QSPI1_IO1>,
+							 <PIN_PB9__QSPI1_IO2>,
+							 <PIN_PB10__QSPI1_IO3>;
+						bias-pull-up;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d27_wlsom1.dtsi b/roms/u-boot/arch/arm/dts/sama5d27_wlsom1.dtsi
new file mode 100644
index 000000000..889a0034d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d27_wlsom1.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d2", "atmel,sama5";
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	ahb {
+		apb {
+			qspi1: spi@f0024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi1_default>;
+
+				qspi1_flash: spi_flash@0 {
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+					spi-rx-bus-width = <4>;
+					spi-tx-bus-width = <4>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+
+				ethernet-phy@0 {
+					reg = <0x0>;
+				};
+			};
+
+			pioA: gpio@fc038000 {
+				pinctrl {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						pinmux = <PIN_PB24__GPIO>;
+						bias-disable;
+					};
+
+					pinctrl_macb0_rmii: macb0_rmii {
+						pinmux = <PIN_PB14__GTXCK>,
+							 <PIN_PB15__GTXEN>,
+							 <PIN_PB16__GRXDV>,
+							 <PIN_PB17__GRXER>,
+							 <PIN_PB18__GRX0>,
+							 <PIN_PB19__GRX1>,
+							 <PIN_PB20__GTX0>,
+							 <PIN_PB21__GTX1>,
+							 <PIN_PB22__GMDC>,
+							 <PIN_PB23__GMDIO>;
+						bias-disable;
+					};
+
+					pinctrl_qspi1_default: qspi1_default {
+						pinmux = <PIN_PB5__QSPI1_SCK>,
+							 <PIN_PB6__QSPI1_CS>,
+							 <PIN_PB7__QSPI1_IO0>,
+							 <PIN_PB8__QSPI1_IO1>,
+							 <PIN_PB9__QSPI1_IO2>,
+							 <PIN_PB10__QSPI1_IO3>;
+						bias-pull-up;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3.dtsi b/roms/u-boot/arch/arm/dts/sama5d3.dtsi
new file mode 100644
index 000000000..42c30e9f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3.dtsi
@@ -0,0 +1,1543 @@
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel SAMA5D3 family SoC";
+	compatible = "atmel,sama5d3", "atmel,sama5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			mmc0: mmc@f0000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0000000 0x600>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+			};
+
+			spi0: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f0010000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf0010000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			i2c0: i2c@f0014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0014000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f0018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0018000 0x4000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			usart0: serial@f001c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf001c000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f0020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0020000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f002c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf002c000 0x300>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				status = "disabled";
+			};
+
+			isi: isi@f0034000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0034000 0x4000>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
+				status = "disabled";
+			};
+
+			sfr: sfr@f0038000 {
+				compatible = "atmel,sama5d3-sfr", "syscon";
+				reg = <0xf0038000 0x60>;
+			};
+
+			mmc1: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
+			};
+
+			spi1: spi@f8008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8008000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@f800c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf800c000 0x4000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			adc0: adc@f8018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xf8018000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					&pinctrl_adc0_ad10
+					&pinctrl_adc0_ad11
+					>;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xfff>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-res = <10 12>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res-names = "lowres", "highres";
+				status = "disabled";
+
+				trigger@0 {
+					reg = <0>;
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger@1 {
+					reg = <1>;
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+				trigger@2 {
+					reg = <2>;
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+				trigger@3 {
+					reg = <3>;
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			i2c2: i2c@f801c000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi2_clk>;
+				status = "disabled";
+			};
+
+			usart2: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			sha@f8034000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf8034000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+				dma-names = "tx";
+				clocks = <&sha_clk>;
+				clock-names = "sha_clk";
+			};
+
+			aes@f8038000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf8038000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+				dma-names = "tx", "rx";
+				clocks = <&aes_clk>;
+				clock-names = "aes_clk";
+			};
+
+			tdes@f803c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf803c000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+				dma-names = "tx", "rx";
+				clocks = <&tdes_clk>;
+				clock-names = "tdes_clk";
+			};
+
+			trng@f8040000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xf8040000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffe800 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe800 0x200>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xffffea00 0x200>;
+				clocks = <&ddrck>, <&mpddr_clk>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&dbgu_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d3-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <47>;
+			};
+
+			pinctrl@fffff200 {
+				u-boot,dm-pre-reloc;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
+					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
+					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
+					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
+					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
+					>;
+				reg = <0xfffff200 0x100		/* pioA */
+				       0xfffff400 0x100		/* pioB */
+				       0xfffff600 0x100		/* pioC */
+				       0xfffff800 0x100		/* pioD */
+				       0xfffffa00 0x100		/* pioE */
+				       >;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD19 periph A ADTRG */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD20 periph A AD0 */
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A AD1 */
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD22 periph A AD2 */
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD23 periph A AD3 */
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD24 periph A AD4 */
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins =
+							<AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD25 periph A AD5 */
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins =
+							<AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD26 periph A AD6 */
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins =
+							<AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD27 periph A AD7 */
+					};
+					pinctrl_adc0_ad8: adc0_ad8 {
+						atmel,pins =
+							<AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD28 periph A AD8 */
+					};
+					pinctrl_adc0_ad9: adc0_ad9 {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD29 periph A AD9 */
+					};
+					pinctrl_adc0_ad10: adc0_ad10 {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD30 periph A AD10, conflicts with PCK0 */
+					};
+					pinctrl_adc0_ad11: adc0_ad11 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD31 periph A AD11, conflicts with PCK1 */
+					};
+				};
+
+				dbgu {
+					u-boot,dm-pre-reloc;
+					pinctrl_dbgu: dbgu-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB30 periph A */
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB31 periph A with pullup */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+							 AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+							 AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+							 AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+							 AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+							 AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
+					};
+				};
+
+				mmc0 {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A MCI0_CK */
+							 AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A MCI0_CDA with pullup */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD1 periph A MCI0_DA0 with pullup */
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A MCI0_DA1 with pullup */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD3 periph A MCI0_DA2 with pullup */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD4 periph A MCI0_DA3 with pullup */
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+					};
+				};
+
+				mmc1 {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+					};
+				};
+
+				nand0 {
+					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PE21 periph A with pullup */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PE22 periph A with pullup */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
+					};
+					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
+					};
+					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
+					};
+					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
+					};
+
+					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
+					};
+					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
+					};
+					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
+					};
+					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
+					};
+					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+						atmel,pins =
+							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
+					};
+					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
+					};
+
+					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
+					};
+					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
+					};
+					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
+					};
+					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
+					};
+
+					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
+					};
+					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
+					};
+					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
+					};
+					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
+					};
+				};
+
+				spi0 {
+					u-boot,dm-pre-reloc;
+					pinctrl_spi0: spi0-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A SPI0_MISO pin */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A SPI0_MOSI pin */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					u-boot,dm-pre-reloc;
+					pinctrl_spi1: spi1-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A SPI1_MISO pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A SPI1_MOSI pin */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC24 periph A SPI1_SPCK pin */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A TK0 */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC17 periph A TF0 */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC18 periph A TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A RK0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC20 periph A RF0 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC21 periph A RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB2 periph B TK1, conflicts with GTX2 */
+							 AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B TF1, conflicts with GTX3 */
+							 AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB6 periph B TD1, conflicts with TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB7 periph B RK1, conflicts with EREFCK */
+							 AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB10 periph B RF1, conflicts with GTXER */
+							 AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph B RD1, conflicts with GRXCK */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD17 periph A */
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD18 periph A with pullup */
+					};
+
+					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB28 periph A */
+							 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB29 periph A with pullup */
+					};
+
+					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB26 periph A, conflicts with GRX7 */
+							 AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A, conflicts with G125CKO */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE25 periph B, conflicts with A25 */
+							 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PE26 periph B with pullup, conflicts NCS0 */
+					};
+
+					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE23 periph B, conflicts with A23 */
+							 AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE24 periph B, conflicts with A24 */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE18 periph B, conflicts with A18 */
+							 AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PE19 periph B with pullup, conflicts with A19 */
+					};
+
+					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE16 periph B, conflicts with A16 */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
+					};
+				};
+			};
+
+			pioA: gpio@fffff200 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff200 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioB: gpio@fffff400 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioC: gpio@fffff600 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioC_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioD: gpio@fffff800 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioD_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioE: gpio@fffffa00 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioE_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,sama5d3-pmc", "syscon";
+				reg = <0xfffffc00 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc &main_osc>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <8000000 50000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+					regmap-sfr = <&sfr>;
+					u-boot,dm-pre-reloc;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <0 166000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: progck@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: progck@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: progck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+					dbgu_clk: dbgu_clk@2 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					hsmc_clk: hsmc_clk@5 {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					pioA_clk: pioA_clk@6 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					pioB_clk: pioB_clk@7 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					pioC_clk: pioC_clk@8 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					pioD_clk: pioD_clk@9 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					pioE_clk: pioE_clk@10 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					usart0_clk: usart0_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart1_clk: usart1_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart2_clk: usart2_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart3_clk: usart3_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					uart0_clk: uart0_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					twi0_clk: twi0_clk@18 {
+						reg = <18>;
+						#clock-cells = <0>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					twi1_clk: twi1_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					twi2_clk: twi2_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					mci0_clk: mci0_clk@21 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					mci1_clk: mci1_clk@22 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					spi0_clk: spi0_clk@24 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <24>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					spi1_clk: spi1_clk@25 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <25>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					tcb0_clk: tcb0_clk@26 {
+						#clock-cells = <0>;
+						reg = <26>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					pwm_clk: pwm_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					adc_clk: adc_clk@29 {
+						#clock-cells = <0>;
+						reg = <29>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					dma0_clk: dma0_clk@30 {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+
+					dma1_clk: dma1_clk@31 {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					uhphs_clk: uhphs_clk@32 {
+						#clock-cells = <0>;
+						reg = <32>;
+					};
+
+					udphs_clk: udphs_clk@33 {
+						#clock-cells = <0>;
+						reg = <33>;
+					};
+
+					isi_clk: isi_clk@37 {
+						#clock-cells = <0>;
+						reg = <37>;
+					};
+
+					ssc0_clk: ssc0_clk@38 {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					ssc1_clk: ssc1_clk@39 {
+						#clock-cells = <0>;
+						reg = <39>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					sha_clk: sha_clk@42 {
+						#clock-cells = <0>;
+						reg = <42>;
+					};
+
+					aes_clk: aes_clk@43 {
+						#clock-cells = <0>;
+						reg = <43>;
+					};
+
+					tdes_clk: tdes_clk@44 {
+						#clock-cells = <0>;
+						reg = <44>;
+					};
+
+					trng_clk: trng_clk@45 {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					fuse_clk: fuse_clk@48 {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+
+					mpddr_clk: mpddr_clk@49 {
+						#clock-cells = <0>;
+						reg = <49>;
+					};
+				};
+			};
+
+			rstc@fffffe00 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown-controller@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&mck>;
+				u-boot,dm-pre-reloc;
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00500000 0x100000
+			       0xf8030000 0x4000>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&udphs_clk>, <&utmi>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+
+			ep0: endpoint@0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep1: endpoint@1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep2: endpoint@2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep3: endpoint@3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep4: endpoint@4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep5: endpoint@5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep6: endpoint@6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep7i: endpoint@7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep8: endpoint@8 {
+				reg = <8>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep9: endpoint@9 {
+				reg = <9>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep10: endpoint@a {
+				reg = <10>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep11: endpoint@b {
+				reg = <11>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep12: endpoint@c {
+				reg = <12>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep13: endpoint@d {
+				reg = <13>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep14: endpoint@e {
+				reg = <14>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep15: endpoint@f {
+				reg = <15>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+		};
+
+		usb1: ohci@00600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@00700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		nand0: nand@60000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <	0x60000000 0x01000000	/* EBI CS3 */
+				0xffffc070 0x00000490	/* SMC PMECC regs */
+				0xffffc500 0x00000100	/* SMC PMECC Error Location regs */
+				0x00110000 0x00018000	/* ROM code */
+				>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
+			status = "disabled";
+
+			nfc@70000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <
+					0x70000000 0x08000000	/* NFC Command Registers */
+					0xffffc000 0x00000070	/* NFC HSMC regs */
+					0x00200000 0x00100000	/* NFC SRAM banks */
+					>;
+				clocks = <&hsmc_clk>;
+			};
+		};
+	};
+
+	onewire_tm: onewire {
+		compatible = "w1-gpio";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d31.dtsi b/roms/u-boot/arch/arm/dts/sama5d31.dtsi
new file mode 100644
index 000000000..883878b32
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d31.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d31ek.dts b/roms/u-boot/arch/arm/dts/sama5d31ek.dts
new file mode 100644
index 000000000..988f86591
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d31ek.dts
@@ -0,0 +1,56 @@
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D31-EK";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d33.dtsi b/roms/u-boot/arch/arm/dts/sama5d33.dtsi
new file mode 100644
index 000000000..4b4434aca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d33.dtsi
@@ -0,0 +1,14 @@
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d33ek.dts b/roms/u-boot/arch/arm/dts/sama5d33ek.dts
new file mode 100644
index 000000000..a2aff7ab7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d33ek.dts
@@ -0,0 +1,49 @@
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d33.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D33-EK";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d34.dtsi b/roms/u-boot/arch/arm/dts/sama5d34.dtsi
new file mode 100644
index 000000000..aa01573fd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d34.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d34ek.dts b/roms/u-boot/arch/arm/dts/sama5d34ek.dts
new file mode 100644
index 000000000..556ba65cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d34ek.dts
@@ -0,0 +1,66 @@
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d34.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D34-EK";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				24c256@50 {
+					compatible = "24c256";
+					reg = <0x50>;
+					pagesize = <64>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d35.dtsi b/roms/u-boot/arch/arm/dts/sama5d35.dtsi
new file mode 100644
index 000000000..16c39f4c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d35.dtsi
@@ -0,0 +1,18 @@
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d35ek.dts b/roms/u-boot/arch/arm/dts/sama5d35ek.dts
new file mode 100644
index 000000000..4e37cfdc6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d35ek.dts
@@ -0,0 +1,59 @@
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d35.dtsi"
+#include "sama5d3xmb.dtsi"
+
+/ {
+	model = "Atmel SAMA5D35-EK";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d36.dtsi b/roms/u-boot/arch/arm/dts/sama5d36.dtsi
new file mode 100644
index 000000000..e85139ef4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d36.dtsi
@@ -0,0 +1,20 @@
+/*
+ * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_tcb1.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d36ek.dts b/roms/u-boot/arch/arm/dts/sama5d36ek.dts
new file mode 100644
index 000000000..1fa798901
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d36ek.dts
@@ -0,0 +1,57 @@
+/*
+ * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d36ek_cmp.dts b/roms/u-boot/arch/arm/dts/sama5d36ek_cmp.dts
new file mode 100644
index 000000000..c17bc9f0d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d36ek_cmp.dts
@@ -0,0 +1,56 @@
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3_can.dtsi b/roms/u-boot/arch/arm/dts/sama5d3_can.dtsi
new file mode 100644
index 000000000..177f0889d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3_can.dtsi
@@ -0,0 +1,74 @@
+/*
+ * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					can0_clk: can0_clk@40 {
+						#clock-cells = <0>;
+						reg = <40>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					can1_clk: can1_clk@41 {
+						#clock-cells = <0>;
+						reg = <41>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+				};
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&can0_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&can1_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3_emac.dtsi b/roms/u-boot/arch/arm/dts/sama5d3_emac.dtsi
new file mode 100644
index 000000000..b654e5014
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3_emac.dtsi
@@ -0,0 +1,55 @@
+/*
+ * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb1_clk: macb1_clk@35 {
+						#clock-cells = <0>;
+						reg = <35>;
+					};
+				};
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3_gmac.dtsi b/roms/u-boot/arch/arm/dts/sama5d3_gmac.dtsi
new file mode 100644
index 000000000..81f636763
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3_gmac.dtsi
@@ -0,0 +1,88 @@
+/*
+ * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb0_clk: macb0_clk@34 {
+						#clock-cells = <0>;
+						reg = <34>;
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "atmel,sama5d3-gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3_lcd.dtsi b/roms/u-boot/arch/arm/dts/sama5d3_lcd.dtsi
new file mode 100644
index 000000000..10fb3a97e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3_lcd.dtsi
@@ -0,0 +1,196 @@
+/*
+ * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0030000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf0030000 0x2000>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+
+					pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk@36 {
+						#clock-cells = <0>;
+						reg = <36>;
+					};
+				};
+
+				systemck {
+					lcdck: lcdck@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3_mci2.dtsi b/roms/u-boot/arch/arm/dts/sama5d3_mci2.dtsi
new file mode 100644
index 000000000..2d289ed7b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3_mci2.dtsi
@@ -0,0 +1,59 @@
+/*
+ * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					mci2_clk: mci2_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				clocks = <&mci2_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3_tcb1.dtsi b/roms/u-boot/arch/arm/dts/sama5d3_tcb1.dtsi
new file mode 100644
index 000000000..5be60b4f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3_tcb1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					tcb1_clk: tcb1_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+				};
+			};
+
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3_uart.dtsi b/roms/u-boot/arch/arm/dts/sama5d3_uart.dtsi
new file mode 100644
index 000000000..6a547fdad
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3_uart.dtsi
@@ -0,0 +1,79 @@
+/*
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					uart0_clk: uart0_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					uart1_clk: uart1_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3xcm.dtsi b/roms/u-boot/arch/arm/dts/sama5d3xcm.dtsi
new file mode 100644
index 000000000..d123057f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3xcm.dtsi
@@ -0,0 +1,123 @@
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <480>;
+					txc-skew-ps = <1800>;
+					rxdv-skew-ps = <240>;
+					rxc-skew-ps = <1800>;
+					rxd0-skew-ps = <240>;
+					rxd1-skew-ps = <240>;
+					rxd2-skew-ps = <240>;
+					rxd3-skew-ps = <240>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <480>;
+					txc-skew-ps = <1800>;
+					rxdv-skew-ps = <240>;
+					rxc-skew-ps = <1800>;
+					rxd0-skew-ps = <240>;
+					rxd1-skew-ps = <240>;
+					rxd2-skew-ps = <240>;
+					rxd3-skew-ps = <240>;
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3xcm_cmp.dtsi b/roms/u-boot/arch/arm/dts/sama5d3xcm_cmp.dtsi
new file mode 100644
index 000000000..332b057e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3xcm_cmp.dtsi
@@ -0,0 +1,166 @@
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <480>;
+					txc-skew-ps = <1800>;
+					rxdv-skew-ps = <240>;
+					rxc-skew-ps = <1800>;
+					rxd0-skew-ps = <240>;
+					rxd1-skew-ps = <240>;
+					rxd2-skew-ps = <240>;
+					rxd3-skew-ps = <240>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <480>;
+					txc-skew-ps = <1800>;
+					rxdv-skew-ps = <240>;
+					rxc-skew-ps = <1800>;
+					rxd0-skew-ps = <240>;
+					rxd1-skew-ps = <240>;
+					rxd2-skew-ps = <240>;
+					rxd3-skew-ps = <240>;
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddana_reg: LDO_REG1 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG2 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+					};
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3xdm.dtsi b/roms/u-boot/arch/arm/dts/sama5d3xdm.dtsi
new file mode 100644
index 000000000..b3df9af2b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3xdm.dtsi
@@ -0,0 +1,67 @@
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0030000 {
+				atmel,vl-bpix = <4>;
+				atmel,output-mode = <24>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888_alt>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					800x480 {
+						clock-frequency = <24000000>;
+						hactive = <800>;
+						vactive = <480>;
+						hsync-len = <5>;
+						hfront-porch = <64>;
+						hback-porch = <64>;
+						vfront-porch = <22>;
+						vback-porch = <21>;
+						vsync-len = <5>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <31 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3xmb.dtsi b/roms/u-boot/arch/arm/dts/sama5d3xmb.dtsi
new file mode 100644
index 000000000..906f3ce8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3xmb.dtsi
@@ -0,0 +1,234 @@
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3xcm.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+				u-boot,dm-pre-reloc;
+
+				spi_flash@0 {
+					compatible = "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+					u-boot,dm-pre-reloc;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck0>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc0_cd: mmc0_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+					   &pioD 26 GPIO_ACTIVE_LOW
+					   &pioD 27 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d3xmb_cmp.dtsi b/roms/u-boot/arch/arm/dts/sama5d3xmb_cmp.dtsi
new file mode 100644
index 000000000..c6bf0f50f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d3xmb_cmp.dtsi
@@ -0,0 +1,234 @@
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				spi_flash@0 {
+					compatible = "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck0>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_gpio_keys: gpio_keys {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+
+	/* Conflict with LCD pins */
+	gpio_keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama5d4.dtsi b/roms/u-boot/arch/arm/dts/sama5d4.dtsi
new file mode 100644
index 000000000..e1df24cdb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama5d4.dtsi
@@ -0,0 +1,1921 @@
+/*
+ * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Atmel SAMA5D4 family SoC";
+	compatible = "atmel,sama5d4";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &usart3;
+		serial1 = &usart4;
+		serial2 = &usart2;
+		serial3 = &usart0;
+		serial4 = &usart1;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		pwm0 = &pwm0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ns_sram: sram@00210000 {
+		compatible = "mmio-sram";
+		reg = <0x00210000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		usb0: gadget@00400000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00400000 0x100000
+			       0xfc02c000 0x4000>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&udphs_clk>, <&utmi>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+
+			ep0: endpoint@0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep1: endpoint@1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep2: endpoint@2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep3: endpoint@3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep4: endpoint@4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep5: endpoint@5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep6: endpoint@6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep7: endpoint@7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep8: endpoint@8 {
+				reg = <8>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep9: endpoint@9 {
+				reg = <9>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep10: endpoint@a {
+				reg = <10>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep11: endpoint@b {
+				reg = <11>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep12: endpoint@c {
+				reg = <12>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep13: endpoint@d {
+				reg = <13>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep14: endpoint@e {
+				reg = <14>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep15: endpoint@f {
+				reg = <15>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+		};
+
+		usb1: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@00600000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@00a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		nand0: nand@80000000 {
+			compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <	0x80000000 0x08000000	/* EBI CS3 */
+				0xfc05c070 0x00000490	/* SMC PMECC regs */
+				0xfc05c500 0x00000100	/* SMC PMECC Error Location regs */
+				>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			status = "disabled";
+
+			nfc@90000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <
+					0x90000000 0x08000000	/* NFC Command Registers */
+					0xfc05c000 0x00000070	/* NFC HSMC regs */
+					0x00100000 0x00100000	/* NFC SRAM banks */
+                                         >;
+				clocks = <&hsmc_clk>;
+				atmel,write-by-sram;
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf0000000 0x4000>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x200>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
+			};
+
+			isi: isi@f0008000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			ramc0: ramc@f0010000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf0010000 0x200>;
+				clocks = <&ddrck>, <&mpddr_clk>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0014000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0014000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: pmc@f0018000 {
+				compatible = "atmel,sama5d3-pmc", "syscon";
+				reg = <0xf0018000 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <100000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc &main_osc>;
+					u-boot,dm-pre-reloc;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <12000000 12000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+					u-boot,dm-pre-reloc;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <125000000 200000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+				};
+
+				h32ck: h32mxck {
+					#clock-cells = <0>;
+					compatible = "atmel,sama5d4-clk-h32mx";
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					u-boot,dm-pre-reloc;
+
+					ddrck: ddrck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpcki@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+				};
+
+				periph32ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&h32ck>;
+					u-boot,dm-pre-reloc;
+
+					pioD_clk: pioD_clk@5 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart0_clk: usart0_clk@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					icm_clk: icm_clk@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					aes_clk: aes_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					tdes_clk: tdes_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					sha_clk: sha_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					matrix1_clk: matrix1_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					hsmc_clk: hsmc_clk@22 {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					pioA_clk: pioA_clk@23 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					pioB_clk: pioB_clk@24 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+
+					pioC_clk: pioC_clk@25 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					pioE_clk: pioE_clk@26 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					uart0_clk: uart0_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					uart1_clk: uart1_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					usart2_clk: usart2_clk@29 {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+					usart3_clk: usart3_clk@30 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+
+					usart4_clk: usart4_clk@31 {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					twi0_clk: twi0_clk@32 {
+						reg = <32>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk@33 {
+						#clock-cells = <0>;
+						reg = <33>;
+					};
+
+					twi2_clk: twi2_clk@34 {
+						#clock-cells = <0>;
+						reg = <34>;
+					};
+
+					mci0_clk: mci0_clk@35 {
+						#clock-cells = <0>;
+						reg = <35>;
+					};
+
+					mci1_clk: mci1_clk@36 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <36>;
+					};
+
+					spi0_clk: spi0_clk@37 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <37>;
+					};
+
+					spi1_clk: spi1_clk@38 {
+						#clock-cells = <0>;
+						reg = <38>;
+					};
+
+					spi2_clk: spi2_clk@39 {
+						#clock-cells = <0>;
+						reg = <39>;
+					};
+
+					tcb0_clk: tcb0_clk@40 {
+						#clock-cells = <0>;
+						reg = <40>;
+					};
+
+					tcb1_clk: tcb1_clk@41 {
+						#clock-cells = <0>;
+						reg = <41>;
+					};
+
+					tcb2_clk: tcb2_clk@42 {
+						#clock-cells = <0>;
+						reg = <42>;
+					};
+
+					pwm_clk: pwm_clk@43 {
+						#clock-cells = <0>;
+						reg = <43>;
+					};
+
+					adc_clk: adc_clk@44 {
+						#clock-cells = <0>;
+						reg = <44>;
+					};
+
+					dbgu_clk: dbgu_clk@45 {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					uhphs_clk: uhphs_clk@46 {
+						#clock-cells = <0>;
+						reg = <46>;
+					};
+
+					udphs_clk: udphs_clk@47 {
+						#clock-cells = <0>;
+						reg = <47>;
+					};
+
+					ssc0_clk: ssc0_clki@48 {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+
+					ssc1_clk: ssc1_clk@49 {
+						#clock-cells = <0>;
+						reg = <49>;
+					};
+
+					trng_clk: trng_clk@53 {
+						#clock-cells = <0>;
+						reg = <53>;
+					};
+
+					macb0_clk: macb0_clk@54 {
+						#clock-cells = <0>;
+						reg = <54>;
+					};
+
+					macb1_clk: macb1_clk@55 {
+						#clock-cells = <0>;
+						reg = <55>;
+					};
+
+					fuse_clk: fuse_clk@57 {
+						#clock-cells = <0>;
+						reg = <57>;
+					};
+
+					securam_clk: securam_clk@59 {
+						#clock-cells = <0>;
+						reg = <59>;
+					};
+
+					smd_clk: smd_clk@61 {
+						#clock-cells = <0>;
+						reg = <61>;
+					};
+
+					twi3_clk: twi3_clk@62 {
+						#clock-cells = <0>;
+						reg = <62>;
+					};
+
+					catb_clk: catb_clk@63 {
+						#clock-cells = <0>;
+						reg = <63>;
+					};
+				};
+
+				periph64ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					dma0_clk: dma0_clk@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					cpkcc_clk: cpkcc_clk@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					aesb_clk: aesb_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					mpddr_clk: mpddr_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					matrix0_clk: matrix0_clk@18 {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					vdec_clk: vdec_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma1_clk: dma1_clk@50 {
+						#clock-cells = <0>;
+						reg = <50>;
+					};
+
+					lcdc_clk: lcdc_clk@51 {
+						#clock-cells = <0>;
+						reg = <51>;
+					};
+
+					isi_clk: isi_clk@52 {
+						#clock-cells = <0>;
+						reg = <52>;
+					};
+				};
+			};
+
+			mmc0: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(0))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+			};
+
+			uart0: serial@f8004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8004000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(22))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8008000 0x4000>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(26))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f800c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf800c000 0x300>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				status = "disabled";
+			};
+
+			spi0: spi@f8010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8010000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(10))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8014000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8014000 0x4000>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(2))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8018000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8018000 0x4000>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(4))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f801c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf801c000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb0: ethernet@f8020000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xf8020000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8024000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(6))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi2_clk>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8028000 {
+				compatible = "atmel,sama5d4-sfr", "syscon";
+				reg = <0xf8028000 0x60>;
+			};
+
+			usart0: serial@f802c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf802c000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8030000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8030000 0x100>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fc000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfc000000 0x600>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
+			};
+
+			uart1: serial@fc004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc004000 0x100>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(24))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(16))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(18))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart4: serial@fc010000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc010000 0x100>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(20))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart4>;
+				clocks = <&usart4_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fc014000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfc014000 0x4000>;
+				interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(28))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi1: spi@fc018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc018000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(12))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi2: spi@fc01c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(14))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi2>;
+				clocks = <&spi2_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			tcb1: timer@fc020000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xfc020000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb1: ethernet@fc028000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xfc028000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fc030000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc030000 0x100>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
+			};
+
+			adc0: adc@fc034000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xfc034000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0x01f>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-ts-pressure-threshold = <10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+					reg = <0>;
+				};
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+					reg = <1>;
+				};
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+					reg = <2>;
+				};
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+					reg = <3>;
+				};
+			};
+
+			aes@fc044000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&aes_clk>;
+				clock-names = "aes_clk";
+				status = "okay";
+			};
+
+			tdes@fc04c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
+				dma-names = "tx", "rx";
+				clocks = <&tdes_clk>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
+
+			sha@fc050000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xfc050000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx";
+				clocks = <&sha_clk>;
+				clock-names = "sha_clk";
+				status = "okay";
+			};
+
+			rstc@fc068600 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shdwc@fc068610 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fc068630 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfc068630 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&h32ck>;
+			};
+
+			watchdog@fc068640 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xfc068640 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			sckc@fc068650 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfc068650 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <250000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@fc0686b0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfc0686b0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			dbgu: serial@fc069000 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfc069000 0x200>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&dbgu_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pioA: gpio@fc06a000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc06a000 0x100>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+			};
+
+			pioB: gpio@fc06b000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc06b000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+			};
+
+			pioC: gpio@fc06c000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc06c000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioC_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioD: gpio@fc068000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc068000 0x100>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioD_clk>;
+			};
+
+			pioE: gpio@fc06d000 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfc06d000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioE_clk>;
+			};
+
+			pinctrl@fc06a000 {
+				u-boot,dm-pre-reloc;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfc068000 0xfc068000 0x100
+					  0xfc06a000 0xfc06a000 0x4000>;
+				/* WARNING: revisit as pin spec has changed */
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
+					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
+					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
+					0x0003ff00 0x8002a800 0x00000000	/* pioD */
+					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
+					>;
+				reg = < 0xfc06a000 0x100
+					0xfc06b000 0x100
+					0xfc06c000 0x100
+					0xfc068000 0x100
+					0xfc06d000 0x100
+					>;
+
+				/* pinctrl pin settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with USBA_VBUS */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,     /* conflicts with D14 and TDI */
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;  /* conflicts with D15 and TDO */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* TWD1, conflicts with UART0 RX and DIBP */
+							 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* TWCK1, conflicts with UART0 TX and DIBN */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
+							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D1 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D2 */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D3 */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D4 */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D5 */
+							 AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D6 */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D7 */
+							 AT91_PIOB  1 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_PCK, conflict with G0_RXCK */
+							 AT91_PIOB  3 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_VSYNC */
+							 AT91_PIOB  4 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_HSYNC */
+					};
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
+					};
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
+							 AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb777: lcd-rgb-3 {
+						atmel,pins =
+							 /* LCDDAT0 conflicts with TMS */
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 /* LCDDAT8 conflicts with TCK */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 /* LCDDAT16 conflicts with NTRST */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb888: lcd-rgb-4 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX0 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX1 */
+							 AT91_PIOB  8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX0 */
+							 AT91_PIOB  9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX1 */
+							 AT91_PIOB  6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXDV */
+							 AT91_PIOB  7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXER */
+							 AT91_PIOB  2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXEN */
+							 AT91_PIOB  0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXCK */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDIO */
+							>;
+					};
+				};
+
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX0 */
+							 AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX1 */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX0 */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX1 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXDV */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXER */
+							 AT91_PIOA  4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXEN */
+							 AT91_PIOA  2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXCK */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDC */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDIO */
+							>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDA, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA0, conflict with NAND_D1 */
+							>;
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA3, conflict with NAND_D4 */
+							>;
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA4, conflict with NAND_D5 */
+							 AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA5, conflict with NAND_D6 */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA6, conflict with NAND_D7 */
+							 AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA7, conflict with NAND_OE */
+							>;
+					};
+				};
+
+				mmc1 {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE		/* MCI1_CK */
+							 AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_CDA */
+							 AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA0 */
+							>;
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA1 */
+							 AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA2 */
+							 AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA3 */
+							>;
+					};
+				};
+
+				nand0 {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A Read Enable */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A Write Enable */
+
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC17 ALE */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC18 CLE */
+
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC15 NCS3/Chip Enable */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC16 NANDRDY */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 Data bit 0 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 Data bit 1 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 Data bit 2 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 Data bit 3 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 Data bit 4 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 Data bit 5 */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A Data bit 6 */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC12 periph A Data bit 7 */
+					};
+				};
+
+				spi0 {
+					u-boot,dm-pre-reloc;
+					pinctrl_spi0: spi0-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MISO */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MOSI */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_SPCK */
+							>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK0 */
+							 AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF0 */
+							 AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK0 */
+							 AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF0 */
+							 AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK1 */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF1 */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK1 */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF1 */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD1 */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MISO */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MOSI */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_SPCK */
+							>;
+					};
+				};
+
+				spi2 {
+					pinctrl_spi2: spi2-0 {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MISO conflicts with RTS0 */
+							 AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MOSI conflicts with TXD0 */
+							 AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_SPCK conflicts with RTS1 */
+							>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD - conflicts with G0_CRS, ISI_HSYNC */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP		/* TXD - conflicts with G0_COL, PCK2 */
+							>;
+					};
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_RX3, PWMH1 */
+					};
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_TXER, ISI_VSYNC */
+					};
+				};
+
+				usart3 {
+					u-boot,dm-pre-reloc;
+					pinctrl_usart3: usart3-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				usart4 {
+					pinctrl_usart4: usart4-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart4_rts: usart4_rts-0 {
+						atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with NWAIT, A19 */
+					};
+					pinctrl_usart4_cts: usart4_cts-0 {
+						atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with A0/NBS0, MCI0_CDB */
+					};
+				};
+			};
+
+			aic: interrupt-controller@fc06e000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d4-aic";
+				interrupt-controller;
+				reg = <0xfc06e000 0x200>;
+				atmel,external-irqs = <56>;
+			};
+		};
+	};
+
+	onewire_tm: onewire {
+		compatible = "w1-gpio";
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama7g5-pinfunc.h b/roms/u-boot/arch/arm/dts/sama7g5-pinfunc.h
new file mode 100644
index 000000000..89293e547
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama7g5-pinfunc.h
@@ -0,0 +1,924 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__CANTX3			PINMUX_PIN(PIN_PA0, 3, 1)
+#define PIN_PA0__PWML0			PINMUX_PIN(PIN_PA0, 5, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__CANRX3			PINMUX_PIN(PIN_PA1, 3, 1)
+#define PIN_PA1__D14			PINMUX_PIN(PIN_PA1, 4, 1)
+#define PIN_PA1__PWMH0			PINMUX_PIN(PIN_PA1, 5, 3)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__PDMC1_CLK		PINMUX_PIN(PIN_PA2, 3, 1)
+#define PIN_PA2__D15			PINMUX_PIN(PIN_PA2, 4, 1)
+#define PIN_PA2__PWMH1			PINMUX_PIN(PIN_PA2, 5, 3)
+#define PIN_PA2__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA2, 6, 3)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__PDMC1_DS0		PINMUX_PIN(PIN_PA3, 3, 1)
+#define PIN_PA3__NWR1_NBS1		PINMUX_PIN(PIN_PA3, 4, 1)
+#define PIN_PA3__PWML3			PINMUX_PIN(PIN_PA3, 5, 3)
+#define PIN_PA3__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA3, 6, 3)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__PDMC1_DS1		PINMUX_PIN(PIN_PA4, 3, 1)
+#define PIN_PA4__NCS2			PINMUX_PIN(PIN_PA4, 4, 1)
+#define PIN_PA4__PWMH3			PINMUX_PIN(PIN_PA4, 5, 3)
+#define PIN_PA4__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA4, 6, 3)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT2		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__CANTX2			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__A23			PINMUX_PIN(PIN_PA5, 4, 1)
+#define PIN_PA5__PWMEXTRG0		PINMUX_PIN(PIN_PA5, 5, 3)
+#define PIN_PA5__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA5, 6, 3)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT3		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__CANRX2			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__A24			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__PWMEXTRG1		PINMUX_PIN(PIN_PA6, 5, 3)
+#define PIN_PA6__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA6, 6, 3)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT4		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__CANTX1			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__NWAIT			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__PWMFI0			PINMUX_PIN(PIN_PA7, 5, 3)
+#define PIN_PA7__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA7, 6, 3)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT5		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__CANRX1			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__NCS0			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__PWMIF1			PINMUX_PIN(PIN_PA8, 5, 3)
+#define PIN_PA8__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA8, 6, 3)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT6		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__CANTX0			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__SMCK			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__SPDIF_RX		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA9, 6, 3)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT7		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__CANRX0		PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__NCS1			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__SPDIF_TX		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA10, 6, 3)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__A0_NBS0		PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__TIOA0			PINMUX_PIN(PIN_PA11, 5, 1)
+#define PIN_PA11__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA11, 6, 3)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__FLEXCOM3_IO5		PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__PWML2			PINMUX_PIN(PIN_PA12, 5, 3)
+#define PIN_PA12__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA12, 6, 3)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__FLEXCOM3_IO6		PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__PWMH2			PINMUX_PIN(PIN_PA13, 5, 3)
+#define PIN_PA13__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA13, 6, 3)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SDMMC0_CD		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__A25			PINMUX_PIN(PIN_PA14, 4, 1)
+#define PIN_PA14__PWML1			PINMUX_PIN(PIN_PA14, 5, 3)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__G0_TXEN		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__ISC_MCK		PINMUX_PIN(PIN_PA15, 3, 1)
+#define PIN_PA15__A1			PINMUX_PIN(PIN_PA15, 4, 1)
+#define PIN_PA15__TIOB0			PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__G0_TX0		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__ISC_D0		PINMUX_PIN(PIN_PA16, 3, 1)
+#define PIN_PA16__A2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__TCLK0			PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__G0_TX1		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__ISC_D1		PINMUX_PIN(PIN_PA17, 3, 1)
+#define PIN_PA17__A3			PINMUX_PIN(PIN_PA17, 4, 1)
+#define PIN_PA17__TIOA1			PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__G0_RXDV		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__ISC_D2		PINMUX_PIN(PIN_PA18, 3, 1)
+#define PIN_PA18__A4			PINMUX_PIN(PIN_PA18, 4, 1)
+#define PIN_PA18__TIOB1			PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__G0_RX0		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__ISC_D3		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__A5			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__TCLK1			PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__G0_RX1		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA20, 2, 1)
+#define PIN_PA20__ISC_D4		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__A6			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__TIOA2			PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__G0_RXER		PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA21, 2, 1)
+#define PIN_PA21__ISC_D5		PINMUX_PIN(PIN_PA21, 3, 1)
+#define PIN_PA21__A7			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__TIOB2			PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__G0_MDC		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__ISC_D6		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__A8			PINMUX_PIN(PIN_PA22, 4, 1)
+#define PIN_PA22__TCLK2			PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__G0_MDIO		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__ISC_D7		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__A9			PINMUX_PIN(PIN_PA23, 4, 1)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__G0_TXCK		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__ISC_HSYNC		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__A10			PINMUX_PIN(PIN_PA24, 4, 1)
+#define PIN_PA24__FLEXCOM0_IO5		PINMUX_PIN(PIN_PA24, 5, 1)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_125CK		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM5_IO4		PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__ISC_VSYNC		PINMUX_PIN(PIN_PA25, 3, 1)
+#define PIN_PA25__A11			PINMUX_PIN(PIN_PA25, 4, 1)
+#define PIN_PA25__FLEXCOM0_IO6		PINMUX_PIN(PIN_PA25, 5, 1)
+#define PIN_PA25__FLEXCOM7_IO0		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX2		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM5_IO2		PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__ISC_FIELD		PINMUX_PIN(PIN_PA26, 3, 1)
+#define PIN_PA26__A12			PINMUX_PIN(PIN_PA26, 4, 1)
+#define PIN_PA26__TF0			PINMUX_PIN(PIN_PA26, 5, 1)
+#define PIN_PA26__FLEXCOM7_IO1		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX3		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM5_IO3		PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__ISC_PCK		PINMUX_PIN(PIN_PA27, 3, 1)
+#define PIN_PA27__A13			PINMUX_PIN(PIN_PA27, 4, 1)
+#define PIN_PA27__TK0			PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RX2		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__ISC_D8		PINMUX_PIN(PIN_PA28, 3, 1)
+#define PIN_PA28__A14			PINMUX_PIN(PIN_PA28, 4, 1)
+#define PIN_PA28__RD0			PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA28, 6, 3)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX3		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__ISC_D9		PINMUX_PIN(PIN_PA29, 3, 1)
+#define PIN_PA29__A15			PINMUX_PIN(PIN_PA29, 4, 1)
+#define PIN_PA29__RF0			PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__FLEXCOM9_IO0		PINMUX_PIN(PIN_PA29, 6, 3)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RXCK		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__ISC_D10		PINMUX_PIN(PIN_PA30, 3, 1)
+#define PIN_PA30__A16			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__RK0			PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__FLEXCOM9_IO1		PINMUX_PIN(PIN_PA30, 6, 3)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_TXER		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__ISC_D11		PINMUX_PIN(PIN_PA31, 3, 1)
+#define PIN_PA31__A17			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__TD0			PINMUX_PIN(PIN_PA31, 5, 1)
+#define PIN_PA31__FLEXCOM10_IO0		PINMUX_PIN(PIN_PA31, 6, 3)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_COL			PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+#define PIN_PB0__EXT_IRQ0		PINMUX_PIN(PIN_PB0, 3, 1)
+#define PIN_PB0__A18			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB0__SPDIF_RX		PINMUX_PIN(PIN_PB0, 5, 2)
+#define PIN_PB0__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB0, 6, 3)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_CRS			PINMUX_PIN(PIN_PB1, 1, 1)
+#define PIN_PB1__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB1, 2, 2)
+#define PIN_PB1__EXT_IRQ1		PINMUX_PIN(PIN_PB1, 3, 1)
+#define PIN_PB1__A19			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__SPDIF_TX		PINMUX_PIN(PIN_PB1, 5, 2)
+#define PIN_PB1__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB1, 6, 3)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_TSUCOMP		PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
+#define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__PCK2			PINMUX_PIN(PIN_PB3, 3, 2)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__TF1			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__PCK3			PINMUX_PIN(PIN_PB4, 3, 2)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 4, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TK1			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM11_IO2		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PCK4			PINMUX_PIN(PIN_PB5, 3, 2)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 4, 1)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__RK1			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM11_IO3		PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PCK5			PINMUX_PIN(PIN_PB6, 3, 2)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 4, 1)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TD1			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM11_IO4		PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__FLEXCOM3_IO5		PINMUX_PIN(PIN_PB7, 3, 2)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 4, 1)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__RD1			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM3_IO6		PINMUX_PIN(PIN_PB8, 3, 2)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 4, 1)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO3		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PDMC0_CLK		PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__NCS3_NANDCS		PINMUX_PIN(PIN_PB9, 4, 1)
+#define PIN_PB9__PWML0			PINMUX_PIN(PIN_PB9, 5, 2)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO2		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PDMC0_DS0		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PB10, 4, 1)
+#define PIN_PB10__PWMH0			PINMUX_PIN(PIN_PB10, 5, 2)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO1		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__PDMC0_DS1		PINMUX_PIN(PIN_PB11, 3, 1)
+#define PIN_PB11__NRD_NANDOE		PINMUX_PIN(PIN_PB11, 4, 1)
+#define PIN_PB11__PWML1			PINMUX_PIN(PIN_PB11, 5, 2)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_IO0		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__FLEXCOM6_IO5		PINMUX_PIN(PIN_PB12, 3, 1)
+#define PIN_PB12__A21_NANDALE		PINMUX_PIN(PIN_PB12, 4, 1)
+#define PIN_PB12__PWMH1			PINMUX_PIN(PIN_PB12, 5, 2)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_CS		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM9_IO0		PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__FLEXCOM6_IO6		PINMUX_PIN(PIN_PB13, 3, 1)
+#define PIN_PB13__A22_NANDCLE		PINMUX_PIN(PIN_PB13, 4, 1)
+#define PIN_PB13__PWML2			PINMUX_PIN(PIN_PB13, 5, 2)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCK		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__FLEXCOM9_IO1		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__D0			PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH2			PINMUX_PIN(PIN_PB14, 5, 2)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_SCKN		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__FLEXCOM9_IO2		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__D1			PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML3			PINMUX_PIN(PIN_PB15, 5, 2)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO4		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__FLEXCOM9_IO3		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__PCK0			PINMUX_PIN(PIN_PB16, 3, 1)
+#define PIN_PB16__D2			PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH3			PINMUX_PIN(PIN_PB16, 5, 2)
+#define PIN_PB16__EXT_IRQ0		PINMUX_PIN(PIN_PB16, 6, 2)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO5		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__FLEXCOM9_IO4		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__PCK1			PINMUX_PIN(PIN_PB17, 3, 1)
+#define PIN_PB17__D3			PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWMEXTRG0		PINMUX_PIN(PIN_PB17, 5, 2)
+#define PIN_PB17__EXT_IRQ1		PINMUX_PIN(PIN_PB17, 6, 2)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO6		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__PCK2			PINMUX_PIN(PIN_PB18, 3, 1)
+#define PIN_PB18__D4			PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMEXTRG1		PINMUX_PIN(PIN_PB18, 5, 2)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_IO7		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__PCK3			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__D5			PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWMFI0		PINMUX_PIN(PIN_PB19, 5, 2)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_DQS		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__D6			PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMFI1		PINMUX_PIN(PIN_PB20, 5, 2)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__QSPI0_INT		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__D7			PINMUX_PIN(PIN_PB21, 4, 1)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__QSPI1_IO3		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__FLEXCOM9_IO6		PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__NANDRDY		PINMUX_PIN(PIN_PB22, 4, 1)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__QSPI1_IO2		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__I2SMCC0_CK		PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__PCK4			PINMUX_PIN(PIN_PB23, 6, 1)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__QSPI1_IO1		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__I2SMCC0_WS		PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__PCK5			PINMUX_PIN(PIN_PB24, 6, 1)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__QSPI1_IO0		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM7_IO2		PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__PCK6			PINMUX_PIN(PIN_PB25, 6, 1)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__QSPI1_CS		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM7_IO3		PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PWMEXTRG0		PINMUX_PIN(PIN_PB26, 5, 1)
+#define PIN_PB26__PCK7			PINMUX_PIN(PIN_PB26, 6, 1)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__QSPI1_SCK		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM7_IO4		PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__I2SMCC0_MCK		PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PWMEXTRG1		PINMUX_PIN(PIN_PB27, 5, 1)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_RSTN		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__ADTRG			PINMUX_PIN(PIN_PB28, 2, 2)
+#define PIN_PB28__PWMFI0		PINMUX_PIN(PIN_PB28, 5, 1)
+#define PIN_PB28__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB28, 6, 4)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CMD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB29, 2, 2)
+#define PIN_PB29__FLEXCOM0_IO5		PINMUX_PIN(PIN_PB29, 3, 2)
+#define PIN_PB29__TIOA3			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__PWMFI1		PINMUX_PIN(PIN_PB29, 5, 1)
+#define PIN_PB29__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB29, 6, 4)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_CK		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM0_IO6		PINMUX_PIN(PIN_PB30, 3, 2)
+#define PIN_PB30__TIOB3			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__PWMH0			PINMUX_PIN(PIN_PB30, 5, 1)
+#define PIN_PB30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB30, 6, 4)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__SDMMC1_DAT0		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB31, 2, 2)
+#define PIN_PB31__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB31, 3, 2)
+#define PIN_PB31__TCLK3			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__PWML0			PINMUX_PIN(PIN_PB31, 5, 1)
+#define PIN_PB31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB31, 6, 4)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__SDMMC1_DAT1		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC0, 2, 2)
+#define PIN_PC0__TIOA4			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__PWML1			PINMUX_PIN(PIN_PC0, 5, 1)
+#define PIN_PC0__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC0, 6, 4)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__SDMMC1_DAT2		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC1, 2, 2)
+#define PIN_PC1__TIOB4			PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__PWMH1			PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC1, 6, 4)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__SDMMC1_DAT3		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC2, 2, 2)
+#define PIN_PC2__TCLK4			PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__PWML2			PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC2, 6, 4)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SDMMC1_WP		PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC3, 2, 2)
+#define PIN_PC3__TIOA5			PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__PWMH2			PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC3, 6, 4)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SDMMC1_CD		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC4, 2, 2)
+#define PIN_PC4__FLEXCOM9_IO6		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__TIOB5			PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__PWML3			PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__FLEXCOM11_IO0		PINMUX_PIN(PIN_PC4, 6, 4)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC5, 2, 2)
+#define PIN_PC5__FLEXCOM6_IO5		PINMUX_PIN(PIN_PC5, 3, 2)
+#define PIN_PC5__TCLK5			PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__PWMH3			PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__FLEXCOM11_IO1		PINMUX_PIN(PIN_PC5, 6, 4)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__FLEXCOM4_IO4		PINMUX_PIN(PIN_PC6, 2, 2)
+#define PIN_PC6__FLEXCOM6_IO6		PINMUX_PIN(PIN_PC6, 3, 2)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC7, 2, 2)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__FLEXCOM7_IO2		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC9, 6, 4)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__FLEXCOM7_IO3		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC10, 6, 4)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC1_CK		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__FLEXCOM7_IO4		PINMUX_PIN(PIN_PC11, 2, 2)
+#define PIN_PC11__FLEXCOM2_IO0		PINMUX_PIN(PIN_PC11, 6, 4)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC1_WS		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC12, 2, 2)
+#define PIN_PC12__FLEXCOM2_IO1		PINMUX_PIN(PIN_PC12, 6, 4)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC1_MCK		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC13, 2, 2)
+#define PIN_PC13__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC13, 6, 4)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC14, 2, 2)
+#define PIN_PC14__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC14, 6, 4)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC15, 6, 4)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC_DOUT2		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC16, 6, 4)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__EXT_IRQ0		PINMUX_PIN(PIN_PC17, 2, 3)
+#define PIN_PC17__FLEXCOM5_IO0		PINMUX_PIN(PIN_PC17, 6, 4)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC18, 2, 2)
+#define PIN_PC18__FLEXCOM5_IO1		PINMUX_PIN(PIN_PC18, 6, 4)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC1_DIN1		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC19, 2, 2)
+#define PIN_PC19__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC19, 6, 4)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC20, 2, 2)
+#define PIN_PC20__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC20, 6, 4)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC21, 2, 2)
+#define PIN_PC21__D3			PINMUX_PIN(PIN_PC21, 4, 2)
+#define PIN_PC21__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC21, 6, 5)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC22, 2, 2)
+#define PIN_PC22__D4			PINMUX_PIN(PIN_PC22, 4, 2)
+#define PIN_PC22__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC22, 6, 5)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC23, 1, 1)
+#define PIN_PC23__FLEXCOM0_IO5		PINMUX_PIN(PIN_PC23, 2, 3)
+#define PIN_PC23__D5			PINMUX_PIN(PIN_PC23, 4, 2)
+#define PIN_PC23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC23, 6, 5)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__FLEXCOM0_IO6		PINMUX_PIN(PIN_PC24, 2, 3)
+#define PIN_PC24__EXT_IRQ1		PINMUX_PIN(PIN_PC24, 3, 3)
+#define PIN_PC24__D6			PINMUX_PIN(PIN_PC24, 4, 2)
+#define PIN_PC24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC24, 6, 5)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__NTRST			PINMUX_PIN(PIN_PC25, 1, 1)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TCK_SWCLK		PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__TMS_SWDIO		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__TDI			PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__TDO			PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD0, 2, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD1, 2, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_RSTN		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__PCK0			PINMUX_PIN(PIN_PD2, 2, 2)
+#define PIN_PD2__CANTX4			PINMUX_PIN(PIN_PD2, 3, 1)
+#define PIN_PD2__D7			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__TIOA0			PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__FLEXCOM8_IO0		PINMUX_PIN(PIN_PD2, 6, 5)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_CMD		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__CANRX4			PINMUX_PIN(PIN_PD3, 3, 1)
+#define PIN_PD3__NANDRDY		PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__TIOB0			PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__FLEXCOM8_IO1		PINMUX_PIN(PIN_PD3, 6, 5)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__SDMMC2_CK		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD4, 2, 2)
+#define PIN_PD4__CANTX5			PINMUX_PIN(PIN_PD4, 3, 1)
+#define PIN_PD4__NCS3_NANDCS		PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__TCLK0			PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__FLEXCOM9_IO0		PINMUX_PIN(PIN_PD4, 6, 5)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__SDMMC2_DAT0		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PD5, 2, 2)
+#define PIN_PD5__CANRX5			PINMUX_PIN(PIN_PD5, 3, 1)
+#define PIN_PD5__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__TIOA1			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__FLEXCOM9_IO1		PINMUX_PIN(PIN_PD5, 6, 5)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__SDMMC2_DAT1		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PD6, 2, 2)
+#define PIN_PD6__SPDIF_RX		PINMUX_PIN(PIN_PD6, 3, 3)
+#define PIN_PD6__NRD_NANDOE		PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__TIOB1			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PD6, 6, 5)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__SDMMC2_DAT2		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__SPDIF_TX		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__A21_NANDALE		PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__TCLK1			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PD7, 6, 5)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__A11_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__SDMMC2_WP		PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__I2SMCC0_DIN1		PINMUX_PIN(PIN_PD9, 3, 2)
+#define PIN_PD9__D0			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__TIOB2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD9__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD9, 6, 5)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__SDMMC2_CD		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__PCK6			PINMUX_PIN(PIN_PD10, 2, 2)
+#define PIN_PD10__I2SMCC0_DIN2		PINMUX_PIN(PIN_PD10, 3, 2)
+#define PIN_PD10__D1			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__TCLK2			PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD10__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD10, 6, 3)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__PCK7			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__I2SMCC0_DIN3		PINMUX_PIN(PIN_PD11, 3, 2)
+#define PIN_PD11__D2			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__TIOA3			PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD11, 6, 3)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__PCK1			PINMUX_PIN(PIN_PD12, 1, 2)
+#define PIN_PD12__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__CANTX0		PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__TIOB3			PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__I2SMCC0_CK		PINMUX_PIN(PIN_PD13, 1, 2)
+#define PIN_PD13__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__PWML0			PINMUX_PIN(PIN_PD13, 3, 4)
+#define PIN_PD13__CANRX0		PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__TCLK3			PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__I2SMCC0_MCK		PINMUX_PIN(PIN_PD14, 1, 2)
+#define PIN_PD14__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__PWMH0			PINMUX_PIN(PIN_PD14, 3, 4)
+#define PIN_PD14__CANTX1		PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__TIOA4			PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD14, 6, 5)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__I2SMCC0_WS		PINMUX_PIN(PIN_PD15, 1, 2)
+#define PIN_PD15__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__PWML1			PINMUX_PIN(PIN_PD15, 3, 4)
+#define PIN_PD15__CANRX1		PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__TIOB4			PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD15, 6, 5)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PD16, 1, 2)
+#define PIN_PD16__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__PWMH1			PINMUX_PIN(PIN_PD16, 3, 4)
+#define PIN_PD16__CANTX2		PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__TCLK4			PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD16, 6, 5)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PD17, 1, 2)
+#define PIN_PD17__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD17, 2, 2)
+#define PIN_PD17__PWML2			PINMUX_PIN(PIN_PD17, 3, 4)
+#define PIN_PD17__CANRX2		PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__TIOA5			PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD17, 6, 5)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PD18, 1, 2)
+#define PIN_PD18__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD18, 2, 2)
+#define PIN_PD18__PWMH2			PINMUX_PIN(PIN_PD18, 3, 4)
+#define PIN_PD18__CANTX3		PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__TIOB5			PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD18, 6, 5)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PD19, 1, 2)
+#define PIN_PD19__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD19, 2, 2)
+#define PIN_PD19__PWML3			PINMUX_PIN(PIN_PD19, 3, 4)
+#define PIN_PD19__CANRX3		PINMUX_PIN(PIN_PD19, 4, 2)
+#define PIN_PD19__TCLK5			PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD19, 6, 5)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
+#define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__PCK1			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD21, 2, 2)
+#define PIN_PD21__CANRX4		PINMUX_PIN(PIN_PD21, 4, 2)
+#define PIN_PD21__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD21, 6, 5)
+#define PIN_PD21__G1_TXEN		PINMUX_PIN(PIN_PD21, 7, 1)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__PDMC0_CLK		PINMUX_PIN(PIN_PD22, 1, 2)
+#define PIN_PD22__PWMEXTRG0		PINMUX_PIN(PIN_PD22, 3, 4)
+#define PIN_PD22__RD1			PINMUX_PIN(PIN_PD22, 4, 2)
+#define PIN_PD22__CANTX5		PINMUX_PIN(PIN_PD22, 6, 2)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 7, 1)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__PDMC0_DS0		PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__PWMEXTRG1		PINMUX_PIN(PIN_PD23, 3, 4)
+#define PIN_PD23__RF1			PINMUX_PIN(PIN_PD23, 4, 2)
+#define PIN_PD23__ISC_MCK		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__CANRX5		PINMUX_PIN(PIN_PD23, 6, 2)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 7, 1)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__PWMFI0		PINMUX_PIN(PIN_PD24, 3, 4)
+#define PIN_PD24__RK1			PINMUX_PIN(PIN_PD24, 4, 2)
+#define PIN_PD24__ISC_D0		PINMUX_PIN(PIN_PD24, 5, 2)
+#define PIN_PD24__G1_RXDV		PINMUX_PIN(PIN_PD24, 7, 1)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__PDMC1_CLK		PINMUX_PIN(PIN_PD25, 1, 2)
+#define PIN_PD25__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD25, 2, 2)
+#define PIN_PD25__PWMFI1		PINMUX_PIN(PIN_PD25, 3, 4)
+#define PIN_PD25__TD1			PINMUX_PIN(PIN_PD25, 4, 2)
+#define PIN_PD25__ISC_D1		PINMUX_PIN(PIN_PD25, 5, 2)
+#define PIN_PD25__G1_RX0		PINMUX_PIN(PIN_PD25, 7, 1)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__PDMC1_DS0		PINMUX_PIN(PIN_PD26, 1, 2)
+#define PIN_PD26__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__ADTRG			PINMUX_PIN(PIN_PD26, 3, 3)
+#define PIN_PD26__TF1			PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__ISC_D2		PINMUX_PIN(PIN_PD26, 5, 2)
+#define PIN_PD26__G1_RX1		PINMUX_PIN(PIN_PD26, 7, 1)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__PDMC1_DS1		PINMUX_PIN(PIN_PD27, 1, 2)
+#define PIN_PD27__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__TIOA0			PINMUX_PIN(PIN_PD27, 3, 3)
+#define PIN_PD27__TK1			PINMUX_PIN(PIN_PD27, 4, 2)
+#define PIN_PD27__ISC_D3		PINMUX_PIN(PIN_PD27, 5, 2)
+#define PIN_PD27__G1_RXER		PINMUX_PIN(PIN_PD27, 7, 1)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__RD0			PINMUX_PIN(PIN_PD28, 1, 2)
+#define PIN_PD28__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__TIOB0			PINMUX_PIN(PIN_PD28, 3, 3)
+#define PIN_PD28__I2SMCC1_CK		PINMUX_PIN(PIN_PD28, 4, 2)
+#define PIN_PD28__ISC_D4		PINMUX_PIN(PIN_PD28, 5, 2)
+#define PIN_PD28__PWML3			PINMUX_PIN(PIN_PD28, 6, 5)
+#define PIN_PD28__G1_MDC		PINMUX_PIN(PIN_PD28, 7, 1)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__RF0			PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__TCLK0			PINMUX_PIN(PIN_PD29, 3, 3)
+#define PIN_PD29__I2SMCC1_WS		PINMUX_PIN(PIN_PD29, 4, 2)
+#define PIN_PD29__ISC_D5		PINMUX_PIN(PIN_PD29, 5, 2)
+#define PIN_PD29__PWMH3			PINMUX_PIN(PIN_PD29, 6, 5)
+#define PIN_PD29__G1_MDIO		PINMUX_PIN(PIN_PD29, 7, 1)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__RK0			PINMUX_PIN(PIN_PD30, 1, 2)
+#define PIN_PD30__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__TIOA1			PINMUX_PIN(PIN_PD30, 3, 3)
+#define PIN_PD30__I2SMCC1_MCK		PINMUX_PIN(PIN_PD30, 4, 2)
+#define PIN_PD30__ISC_D6		PINMUX_PIN(PIN_PD30, 5, 2)
+#define PIN_PD30__PWMEXTRG0		PINMUX_PIN(PIN_PD30, 6, 5)
+#define PIN_PD30__G1_TXCK		PINMUX_PIN(PIN_PD30, 7, 1)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__TD0			PINMUX_PIN(PIN_PD31, 1, 2)
+#define PIN_PD31__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__TIOB1			PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PD31, 4, 2)
+#define PIN_PD31__ISC_D7		PINMUX_PIN(PIN_PD31, 5, 2)
+#define PIN_PD31__PWM_EXTRG1		PINMUX_PIN(PIN_PD31, 6, 5)
+#define PIN_PD31__G1_TX2		PINMUX_PIN(PIN_PD31, 7, 1)
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__TF0			PINMUX_PIN(PIN_PE0, 1, 2)
+#define PIN_PE0__FLEXCOM6_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__TCLK1			PINMUX_PIN(PIN_PE0, 3, 3)
+#define PIN_PE0__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PE0, 4, 2)
+#define PIN_PE0__ISC_HSYNC		PINMUX_PIN(PIN_PE0, 5, 2)
+#define PIN_PE0__PWMFI0			PINMUX_PIN(PIN_PE0, 6, 5)
+#define PIN_PE0__G1_TX3			PINMUX_PIN(PIN_PE0, 7, 1)
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__TK0			PINMUX_PIN(PIN_PE1, 1, 2)
+#define PIN_PE1__FLEXCOM6_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__TIOA2			PINMUX_PIN(PIN_PE1, 3, 3)
+#define PIN_PE1__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PE1, 4, 2)
+#define PIN_PE1__ISC_VSYNC		PINMUX_PIN(PIN_PE1, 5, 2)
+#define PIN_PE1__PWMFI1			PINMUX_PIN(PIN_PE1, 6, 5)
+#define PIN_PE1__G1_RX2			PINMUX_PIN(PIN_PE1, 7, 1)
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__PWML0			PINMUX_PIN(PIN_PE2, 1, 5)
+#define PIN_PE2__FLEXCOM6_IO4		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__TIOB2			PINMUX_PIN(PIN_PE2, 3, 3)
+#define PIN_PE2__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PE2, 4, 2)
+#define PIN_PE2__ISC_FIELD		PINMUX_PIN(PIN_PE2, 5, 2)
+#define PIN_PE2__G1_RX3			PINMUX_PIN(PIN_PE2, 7, 1)
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__PWMH0			PINMUX_PIN(PIN_PE3, 1, 5)
+#define PIN_PE3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PE3, 2, 4)
+#define PIN_PE3__TCLK2			PINMUX_PIN(PIN_PE3, 3, 3)
+#define PIN_PE3__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE3, 4, 2)
+#define PIN_PE3__ISC_PCK		PINMUX_PIN(PIN_PE3, 5, 2)
+#define PIN_PE3__G1_RXCK		PINMUX_PIN(PIN_PE3, 7, 1)
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__PWML1			PINMUX_PIN(PIN_PE4, 1, 5)
+#define PIN_PE4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PE4, 2, 4)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 3, 3)
+#define PIN_PE4__I2SMCC1_DIN1		PINMUX_PIN(PIN_PE4, 4, 2)
+#define PIN_PE4__ISC_D8			PINMUX_PIN(PIN_PE4, 5, 2)
+#define PIN_PE4__G1_TXER		PINMUX_PIN(PIN_PE4, 7, 1)
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__PWMH1			PINMUX_PIN(PIN_PE5, 1, 5)
+#define PIN_PE5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PE5, 2, 4)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 3, 3)
+#define PIN_PE5__I2SMCC1_DIN2		PINMUX_PIN(PIN_PE5, 4, 2)
+#define PIN_PE5__ISC_D9			PINMUX_PIN(PIN_PE5, 5, 2)
+#define PIN_PE5__G1_COL			PINMUX_PIN(PIN_PE5, 7, 1)
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__PWML2			PINMUX_PIN(PIN_PE6, 1, 5)
+#define PIN_PE6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PE6, 2, 4)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 3, 3)
+#define PIN_PE6__I2SMCC1_DIN3		PINMUX_PIN(PIN_PE6, 4, 2)
+#define PIN_PE6__ISC_D10		PINMUX_PIN(PIN_PE6, 5, 2)
+#define PIN_PE6__G1_CRS			PINMUX_PIN(PIN_PE6, 7, 1)
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__PWMH2			PINMUX_PIN(PIN_PE7, 1, 5)
+#define PIN_PE7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PE7, 2, 4)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 3, 3)
+#define PIN_PE7__ISC_D11		PINMUX_PIN(PIN_PE7, 5, 2)
+#define PIN_PE7__G1_TSUCOMP		PINMUX_PIN(PIN_PE7, 7, 1)
+
diff --git a/roms/u-boot/arch/arm/dts/sama7g5.dtsi b/roms/u-boot/arch/arm/dts/sama7g5.dtsi
new file mode 100644
index 000000000..b951aff43
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama7g5.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama7g5.dtsi - Device Tree Include file for SAMA7G5 SoC.
+ *
+ * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clk/at91.h>
+
+/ {
+	model = "Microchip SAMA7G5 family SoC";
+	compatible = "microchip,sama7g5";
+
+	clocks {
+		slow_rc_osc: slow_rc_osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+
+		main_rc: main_rc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_CORE 22>, <&main_xtal>;
+			clock-names = "cpu", "master", "xtal";
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pioA: pinctrl@e0014000 {
+				compatible = "microchip,sama7g5-gpio";
+				reg = <0xe0014000 0x800>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "okay";
+
+				pinctrl: pinctrl_default {
+					compatible = "microchip,sama7g5-pinctrl";
+				};
+			};
+
+			pmc: pmc@e0018000 {
+				compatible = "microchip,sama7g5-pmc";
+				reg = <0xe0018000 0x200>;
+				#clock-cells = <2>;
+				clocks = <&clk32 1>, <&clk32 0>, <&main_xtal>, <&main_rc>;
+				clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
+				status = "okay";
+			};
+
+			clk32: sckc@e001d050 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xe001d050 0x4>;
+				clocks = <&slow_rc_osc>, <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			sdmmc0: sdio-host@e1204000 {
+				compatible = "microchip,sama7g5-sdhci";
+				reg = <0xe1204000 0x300>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+				clock-names = "hclock", "multclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+				assigned-clock-rates = <200000000>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
+				status = "disabled";
+			};
+
+			sdmmc1: sdio-host@e1208000 {
+				compatible = "microchip,sama7g5-sdhci";
+				reg = <0xe1208000 0x300>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+				clock-names = "hclock", "multclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+				assigned-clock-rates = <200000000>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
+				status = "disabled";
+			};
+
+			pit64b0: timer@e1800000 {
+				compatible = "microchip,sama7g5-pit64b";
+				reg = <0xe1800000 0x4000>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+				clock-names = "pclk", "gclk";
+				status = "okay";
+			};
+
+			flx1: flexcom@e181c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xe181c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xe181c000 0x800>;
+				status = "disabled";
+
+				i2c1: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				};
+			};
+
+			uart0: serial@e1824200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xe1824200 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			gmac0: ethernet@e2800000 {
+				compatible = "cdns,sama7g5-gem";
+				reg = <0xe2800000 0x4000>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>;
+				clock-names = "hclk", "pclk", "tx_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE 21>; /* eth pll div. */
+				assigned-clock-rates = <125000000>;
+				status = "disabled";
+			};
+
+			gmac1: ethernet@e2804000 {
+				compatible = "cdns,sama7g5-emac";
+				reg = <0xe2804000 0x1000>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sama7g5ek-u-boot.dtsi b/roms/u-boot/arch/arm/dts/sama7g5ek-u-boot.dtsi
new file mode 100644
index 000000000..5e1a0d53a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama7g5ek-u-boot.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama7g5ek-u-boot.dts - Device Tree file for SAMA7G5 SoC u-boot properties.
+ *
+ * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+	};
+
+	ahb {
+		u-boot,dm-pre-reloc;
+
+		apb {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&main_rc {
+	u-boot,dm-pre-reloc;
+};
+
+&main_xtal {
+	u-boot,dm-pre-reloc;
+};
+
+&pioA {
+	u-boot,dm-pre-reloc;
+
+	pinctrl {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&pinctrl_flx3_default {
+	u-boot,dm-pre-reloc;
+};
+
+&pit64b0 {
+	u-boot,dm-pre-reloc;
+};
+
+&pmc {
+	u-boot,dm-pre-reloc;
+};
+
+&slow_rc_osc {
+	u-boot,dm-pre-reloc;
+};
+
+&slow_xtal {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/sama7g5ek.dts b/roms/u-boot/arch/arm/dts/sama7g5ek.dts
new file mode 100644
index 000000000..3a4fdd38a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sama7g5ek.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * sama7g5ek.dts - Device Tree file for SAMA7G5 EK
+ *		   SAMA7G5 Evaluation Kit
+ *
+ *  Copyright (c) 2020, Microchip Technology Inc.
+ *                2020, Eugen Hristev <eugen.hristev@microchip.com>
+ *		  2020, Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+/dts-v1/;
+#include "sama7g5.dtsi"
+#include "sama7g5-pinfunc.h"
+
+/ {
+	model = "Microchip SAMA7G5 Evaluation Kit";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g54", "microchip,sama7g5", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal: main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+
+		apb {
+			sdmmc0: sdio-host@e1204000 {
+				bus-width = <8>;
+				non-removable;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sdmmc0_cmd_data_default
+					     &pinctrl_sdmmc0_ck_rstn_ds_cd_default>;
+				status = "okay";
+			};
+
+			sdmmc1: sdio-host@e1208000 {
+				bus-width = <4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sdmmc1_cmd_data_default
+					     &pinctrl_sdmmc1_ck_cd_rstn_vddsel_default>;
+				status = "okay";
+			};
+
+			uart0: serial@e1824200 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_flx3_default>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx1_default>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "microchip,24aa02e48";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "microchip,24aa02e48";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txc_default>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac1_default>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	pinctrl_flx1_default: flx1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx3_default: flx3_default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc0_cmd_data_default: sdmmc0_cmd_data_default {
+		pinmux = <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA3__SDMMC0_DAT0>,
+			 <PIN_PA4__SDMMC0_DAT1>,
+			 <PIN_PA5__SDMMC0_DAT2>,
+			 <PIN_PA6__SDMMC0_DAT3>,
+			 <PIN_PA7__SDMMC0_DAT4>,
+			 <PIN_PA8__SDMMC0_DAT5>,
+			 <PIN_PA9__SDMMC0_DAT6>,
+			 <PIN_PA10__SDMMC0_DAT7>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc0_ck_rstn_ds_cd_default: sdmmc0_ck_rstn_ds_cd_default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA2__SDMMC0_RSTN>,
+			 <PIN_PA11__SDMMC0_DS>,
+			 <PIN_PA14__SDMMC0_CD>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_cmd_data_default: sdmmc1_cmd_data_default {
+		pinmux = <PIN_PB29__SDMMC1_CMD>,
+			 <PIN_PB31__SDMMC1_DAT0>,
+			 <PIN_PC0__SDMMC1_DAT1>,
+			 <PIN_PC1__SDMMC1_DAT2>,
+			 <PIN_PC2__SDMMC1_DAT3>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_ck_cd_rstn_vddsel_default: sdmmc1_ck_cd_rstn_vddsel_default {
+		pinmux = <PIN_PB30__SDMMC1_CK>,
+			 <PIN_PB28__SDMMC1_RSTN>,
+			 <PIN_PC5__SDMMC1_1V8SEL>,
+			 <PIN_PC4__SDMMC1_CD>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac0_default: gmac0_default {
+		pinmux = <PIN_PA16__G0_TX0>,
+			 <PIN_PA17__G0_TX1>,
+			 <PIN_PA26__G0_TX2>,
+			 <PIN_PA27__G0_TX3>,
+			 <PIN_PA19__G0_RX0>,
+			 <PIN_PA20__G0_RX1>,
+			 <PIN_PA28__G0_RX2>,
+			 <PIN_PA29__G0_RX3>,
+			 <PIN_PA15__G0_TXEN>,
+			 <PIN_PA30__G0_RXCK>,
+			 <PIN_PA18__G0_RXDV>,
+			 <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>,
+			 <PIN_PA25__G0_125CK>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txc_default: gmac0_txc_default {
+		pinmux = <PIN_PA24__G0_TXCK>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac1_default: gmac1_default {
+		pinmux = <PIN_PD30__G1_TXCK>,
+			 <PIN_PD22__G1_TX0>,
+			 <PIN_PD23__G1_TX1>,
+			 <PIN_PD21__G1_TXEN>,
+			 <PIN_PD25__G1_RX0>,
+			 <PIN_PD26__G1_RX1>,
+			 <PIN_PD27__G1_RXER>,
+			 <PIN_PD24__G1_RXDV>,
+			 <PIN_PD28__G1_MDC>,
+			 <PIN_PD29__G1_MDIO>;
+		bias-disable;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/skeleton.dtsi b/roms/u-boot/arch/arm/dts/skeleton.dtsi
new file mode 100644
index 000000000..b41d241de
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/skeleton.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.  The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+	memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/roms/u-boot/arch/arm/dts/skeleton64.dtsi b/roms/u-boot/arch/arm/dts/skeleton64.dtsi
new file mode 100644
index 000000000..b5d7f36f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/skeleton64.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree in the 64 bits version; the bare minimum
+ * needed to boot; just include and add a compatible value.  The
+ * bootloader will typically populate the memory node.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	chosen { };
+	aliases { };
+	memory { device_type = "memory"; reg = <0 0 0 0>; };
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga-common-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga-common-u-boot.dtsi
new file mode 100644
index 000000000..d55460755
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga-common-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (c) 2019 Simon Goldschmidt
+ */
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&clkmgr {
+	u-boot,dm-pre-reloc;
+};
+
+&rst {
+	u-boot,dm-pre-reloc;
+};
+
+&sdr {
+	u-boot,dm-pre-reloc;
+};
+
+&sysmgr {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga.dtsi b/roms/u-boot/arch/arm/dts/socfpga.dtsi
new file mode 100644
index 000000000..ff79d335a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga.dtsi
@@ -0,0 +1,961 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera <www.altera.com>
+ */
+
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		timer0 = &timer0;
+		timer1 = &timer1;
+		timer2 = &timer2;
+		timer3 = &timer3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "altr,socfpga-smp";
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu: pmu@ff111000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 176 4>, <0 177 4>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		reg = <0xff111000 0x1000>,
+		      <0xff113000 0x1000>;
+	};
+
+	intc: intc@fffed000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfffed000 0x1000>,
+		      <0xfffec100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffe01000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffe01000 0x1000>;
+				interrupts = <0 104 4>,
+					     <0 105 4>,
+					     <0 106 4>,
+					     <0 107 4>,
+					     <0 108 4>,
+					     <0 109 4>,
+					     <0 110 4>,
+					     <0 111 4>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>;
+			};
+		};
+
+		base_fpga_region {
+			compatible = "fpga-region";
+			fpga-mgr = <&fpgamgr0>;
+
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+		};
+
+		can0: can@ffc00000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc00000 0x1000>;
+			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+			clocks = <&can0_clk>;
+			resets = <&rst CAN0_RESET>;
+			status = "disabled";
+		};
+
+		can1: can@ffc01000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc01000 0x1000>;
+			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+			clocks = <&can1_clk>;
+			resets = <&rst CAN1_RESET>;
+			status = "disabled";
+		};
+
+		clkmgr: clkmgr@ffd04000 {
+				compatible = "altr,clk-mgr";
+				reg = <0xffd04000 0x1000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					osc2: osc2 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_periph_ref_clk: f2s_periph_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					main_pll: main_pll@40 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>;
+						reg = <0x40>;
+
+						mpuclk: mpuclk@48 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe0 0 9>;
+							reg = <0x48>;
+						};
+
+						mainclk: mainclk@4c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe4 0 9>;
+							reg = <0x4C>;
+						};
+
+						dbg_base_clk: dbg_base_clk@50 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>, <&osc1>;
+							div-reg = <0xe8 0 9>;
+							reg = <0x50>;
+						};
+
+						main_qspi_clk: main_qspi_clk@54 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x54>;
+						};
+
+						main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x58>;
+						};
+
+						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x5C>;
+						};
+					};
+
+					periph_pll: periph_pll@80 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
+						reg = <0x80>;
+
+						emac0_clk: emac0_clk@88 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x88>;
+						};
+
+						emac1_clk: emac1_clk@8c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x8C>;
+						};
+
+						per_qspi_clk: per_qsi_clk@90 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x90>;
+						};
+
+						per_nand_mmc_clk: per_nand_mmc_clk@94 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x94>;
+						};
+
+						per_base_clk: per_base_clk@98 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x98>;
+						};
+
+						h2f_usr1_clk: h2f_usr1_clk@9c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x9C>;
+						};
+					};
+
+					sdram_pll: sdram_pll@c0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
+						reg = <0xC0>;
+
+						ddr_dqs_clk: ddr_dqs_clk@c8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xC8>;
+						};
+
+						ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xCC>;
+						};
+
+						ddr_dq_clk: ddr_dq_clk@d0 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xD0>;
+						};
+
+						h2f_usr2_clk: h2f_usr2_clk@d4 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xD4>;
+						};
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <4>;
+					};
+
+					mpu_l2_ram_clk: mpu_l2_ram_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <2>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						clk-gate = <0x60 0>;
+					};
+
+					l3_main_clk: l3_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mainclk>;
+						fixed-divider = <1>;
+					};
+
+					l3_mp_clk: l3_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 0 2>;
+						clk-gate = <0x60 1>;
+					};
+
+					l3_sp_clk: l3_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&l3_mp_clk>;
+						div-reg = <0x64 2 2>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 4 3>;
+						clk-gate = <0x60 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 7 3>;
+						clk-gate = <0x60 3>;
+					};
+
+					dbg_at_clk: dbg_at_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 0 2>;
+						clk-gate = <0x60 4>;
+					};
+
+					dbg_clk: dbg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_at_clk>;
+						div-reg = <0x68 2 2>;
+						clk-gate = <0x60 5>;
+					};
+
+					dbg_trace_clk: dbg_trace_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x6C 0 3>;
+						clk-gate = <0x60 6>;
+					};
+
+					dbg_timer_clk: dbg_timer_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						clk-gate = <0x60 7>;
+					};
+
+					cfg_clk: cfg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 8>;
+					};
+
+					h2f_user0_clk: h2f_user0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 9>;
+					};
+
+					emac_0_clk: emac_0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac0_clk>;
+						clk-gate = <0xa0 0>;
+					};
+
+					emac_1_clk: emac_1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac1_clk>;
+						clk-gate = <0xa0 1>;
+					};
+
+					usb_mp_clk: usb_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 2>;
+						div-reg = <0xa4 0 3>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 3>;
+						div-reg = <0xa4 3 3>;
+					};
+
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 4>;
+						div-reg = <0xa4 6 3>;
+					};
+
+					can1_clk: can1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 5>;
+						div-reg = <0xa4 9 3>;
+					};
+
+					gpio_db_clk: gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 6>;
+						div-reg = <0xa8 0 24>;
+					};
+
+					h2f_user1_clk: h2f_user1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr1_clk>;
+						clk-gate = <0xa0 7>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 8>;
+						clk-phase = <0 135>;
+					};
+
+					sdmmc_clk_divided: sdmmc_clk_divided {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&sdmmc_clk>;
+						clk-gate = <0xa0 8>;
+						fixed-divider = <4>;
+					};
+
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 10>;
+						fixed-divider = <4>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+						clk-gate = <0xa0 11>;
+					};
+
+					ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dqs_clk>;
+						clk-gate = <0xd8 0>;
+					};
+
+					ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_2x_dqs_clk>;
+						clk-gate = <0xd8 1>;
+					};
+
+					ddr_dq_clk_gate: ddr_dq_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dq_clk>;
+						clk-gate = <0xd8 2>;
+					};
+
+					h2f_user2_clk: h2f_user2_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr2_clk>;
+						clk-gate = <0xd8 3>;
+					};
+
+				};
+		};
+
+		fpga_bridge0: fpga_bridge@ff400000 {
+			compatible = "altr,socfpga-lwhps2fpga-bridge";
+			reg = <0xff400000 0x100000>;
+			resets = <&rst LWHPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+		};
+
+		fpga_bridge1: fpga_bridge@ff500000 {
+			compatible = "altr,socfpga-hps2fpga-bridge";
+			reg = <0xff500000 0x10000>;
+			resets = <&rst HPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+		};
+
+		fpgamgr0: fpgamgr@ff706000 {
+			compatible = "altr,socfpga-fpga-mgr";
+			reg = <0xff706000 0x1000
+			       0xffb90000 0x4>;
+			interrupts = <0 175 4>;
+		};
+
+		gmac0: ethernet@ff700000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+			reg = <0xff700000 0x2000>;
+			interrupts = <0 115 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac_0_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff702000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 2>;
+			reg = <0xff702000 0x2000>;
+			interrupts = <0 120 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac_1_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ff708000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff708000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 164 4>;
+			};
+		};
+
+		gpio1: gpio@ff709000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff709000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 165 4>;
+			};
+		};
+
+		gpio2: gpio@ff70a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff70a000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO2_RESET>;
+			status = "disabled";
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 166 4>;
+			};
+		};
+
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
+		};
+
+		eccmgr: eccmgr {
+			compatible = "altr,socfpga-ecc-manager";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			l2-ecc@ffd08140 {
+				compatible = "altr,socfpga-l2-ecc";
+				reg = <0xffd08140 0x4>;
+				interrupts = <0 36 1>, <0 37 1>;
+			};
+
+			ocram-ecc@ffd08144 {
+				compatible = "altr,socfpga-ocram-ecc";
+				reg = <0xffd08144 0x4>;
+				iram = <&ocram>;
+				interrupts = <0 178 1>, <0 179 1>;
+			};
+		};
+
+		L2: l2-cache@fffef000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffef000 0x1000>;
+			interrupts = <0 38 0x04>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <2 1 1>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <0>;
+			arm,prefetch-offset = <7>;
+		};
+
+		l3regs@0xff800000 {
+			compatible = "altr,l3regs", "syscon";
+			reg = <0xff800000 0x1000>;
+		};
+
+		mmc: dwmmc0@ff704000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff704000 0x1000>;
+			interrupts = <0 139 4>;
+			fifo-depth = <0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
+			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
+			status = "disabled";
+		};
+
+		nand0: nand@ff900000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xff900000 0x100000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0x0 0x90 0x4>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffff0000 {
+			compatible = "mmio-sram";
+			reg = <0xffff0000 0x10000>;
+		};
+
+		qspi: spi@ff705000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff705000 0x1000>,
+			      <0xffa00000 0x1000>;
+			interrupts = <0 151 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>;
+			status = "disabled";
+		};
+
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+			altr,modrst-offset = <0x10>;
+		};
+
+		scu: snoop-control-unit@fffec000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xfffec000 0x100>;
+		};
+
+		sdr: sdr@ffc20000 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffc20000 0x6000>;
+			resets = <&rst SDR_RESET>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 39 4>;
+		};
+
+		spi0: spi@fff00000 {
+			compatible = "altr,socfpga-spi", "snps,dw-apb-ssi-3.20",
+				     "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 154 4>;
+			num-cs = <4>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			status = "disabled";
+		};
+
+		spi1: spi@fff01000 {
+			compatible = "altr,socfpga-spi", "snps,dw-apb-ssi-3.20",
+				     "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfff01000 0x1000>;
+			interrupts = <0 155 4>;
+			num-cs = <4>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd08000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd08000 0x4000>;
+		};
+
+		/* Local timer */
+		timer@fffec600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfffec600 0x100>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&mpu_periph_clk>;
+		};
+
+		timer0: timer0@ffc08000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 167 4>;
+			reg = <0xffc08000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer1: timer1@ffc09000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 168 4>;
+			reg = <0xffc09000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 169 4>;
+			reg = <0xffd00000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
+			resets = <&rst OSC1TIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer3: timer3@ffd01000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 170 4>;
+			reg = <0xffd01000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
+			resets = <&rst OSC1TIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x1000>;
+			interrupts = <0 162 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 28>,
+			       <&pdma 29>;
+			dma-names = "tx", "rx";
+			resets = <&rst UART0_RESET>;
+		};
+
+		uart1: serial1@ffc03000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc03000 0x1000>;
+			interrupts = <0 163 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 30>,
+			       <&pdma 31>;
+			dma-names = "tx", "rx";
+			resets = <&rst UART1_RESET>;
+		};
+
+		usbphy0: usbphy {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 125 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 128 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd02000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd02000 0x1000>;
+			interrupts = <0 171 4>;
+			clocks = <&osc1>;
+			resets = <&rst L4WD0_RESET>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd03000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd03000 0x1000>;
+			interrupts = <0 172 4>;
+			clocks = <&osc1>;
+			resets = <&rst L4WD1_RESET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_agilex-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_agilex-u-boot.dtsi
new file mode 100644
index 000000000..08f7cf7f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_agilex-u-boot.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2019-2020 Intel Corporation <www.intel.com>
+ */
+
+#include "socfpga_soc64_fit-u-boot.dtsi"
+
+/{
+	memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		u-boot,dm-pre-reloc;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+
+		ccu: cache-controller@f7000000 {
+			compatible = "arteris,ncore-ccu";
+			reg = <0xf7000000 0x100900>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&clkmgr {
+	u-boot,dm-pre-reloc;
+};
+
+&gmac1 {
+	altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+};
+
+&gmac2 {
+	altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+};
+
+&i2c0 {
+	reset-names = "i2c";
+};
+
+&i2c1 {
+	reset-names = "i2c";
+};
+
+&i2c2 {
+	reset-names = "i2c";
+};
+
+&i2c3 {
+	reset-names = "i2c";
+};
+
+&mmc {
+	resets = <&rst SDMMC_RESET>, <&rst SDMMC_OCP_RESET>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&rst {
+	compatible = "altr,rst-mgr";
+	altr,modrst-offset = <0x20>;
+	u-boot,dm-pre-reloc;
+};
+
+&sdr {
+	compatible = "intel,sdr-ctl-agilex";
+	reg = <0xf8000400 0x80>,
+	      <0xf8010000 0x190>,
+	      <0xf8011000 0x500>;
+	resets = <&rst DDRSCH_RESET>;
+	u-boot,dm-pre-reloc;
+};
+
+&sysmgr {
+	compatible = "altr,sys-mgr", "syscon";
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&watchdog0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_agilex.dtsi b/roms/u-boot/arch/arm/dts/socfpga_agilex.dtsi
new file mode 100644
index 000000000..c3ead2d72
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_agilex.dtsi
@@ -0,0 +1,624 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/agilex-clock.h>
+
+/ {
+	compatible = "intel,socfpga-agilex";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		service_reserved: svcbuffer@0 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x0 0x0 0x1000000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	intc: intc@fffc1000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0xfffc1000 0x0 0x1000>,
+		      <0x0 0xfffc2000 0x0 0x2000>,
+		      <0x0 0xfffc4000 0x0 0x2000>,
+		      <0x0 0xfffc6000 0x0 0x2000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges = <0 0 0 0xffffffff>;
+
+		base_fpga_region {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
+		clkmgr: clock-controller@ffd10000 {
+			compatible = "intel,agilex-clkmgr";
+			reg = <0xffd10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clocks {
+			cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			cb_intosc_ls_clk: cb-intosc-ls-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			f2s_free_clk: f2s-free-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			osc1: osc1 {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			qspi_clk: qspi-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <200000000>;
+			};
+		};
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 90 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 1>;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			clocks = <&clkmgr AGILEX_EMAC0_CLK>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff802000 0x2000>;
+			interrupts = <0 91 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 2>;
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+			clocks = <&clkmgr AGILEX_EMAC1_CLK>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 92 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 3>;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
+			clocks = <&clkmgr AGILEX_EMAC2_CLK>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc03200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03200 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 110 4>;
+			};
+		};
+
+		gpio1: gpio@ffc03300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03300 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 111 4>;
+			};
+		};
+
+		i2c0: i2c@ffc02800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02800 0x100>;
+			interrupts = <0 103 4>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02900 0x100>;
+			interrupts = <0 104 4>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02a00 0x100>;
+			interrupts = <0 105 4>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02b00 0x100>;
+			interrupts = <0 106 4>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02c00 0x100>;
+			interrupts = <0 107 4>;
+			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		mmc: dwmmc0@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 96 4>;
+			fifo-depth = <0x400>;
+			resets = <&rst SDMMC_RESET>;
+			reset-names = "reset";
+			clocks = <&clkmgr AGILEX_L4_MP_CLK>,
+				 <&clkmgr AGILEX_SDMMC_CLK>;
+			clock-names = "biu", "ciu";
+			iommus = <&smmu 5>;
+			status = "disabled";
+		};
+
+		nand: nand@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x10000>,
+			      <0xffb80000 0x1000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 97 4>;
+			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x40000>;
+		};
+
+		pdma: pdma@ffda0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xffda0000 0x1000>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>,
+				     <0 85 4>,
+				     <0 86 4>,
+				     <0 87 4>,
+				     <0 88 4>,
+				     <0 89 4>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+			reset-names = "dma", "dma-ocp";
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			clock-names = "apb_pclk";
+		};
+
+		rst: rstmgr@ffd11000 {
+			#reset-cells = <1>;
+			compatible = "altr,stratix10-rst-mgr";
+			reg = <0xffd11000 0x100>;
+		};
+
+		smmu: iommu@fa000000 {
+			compatible = "arm,mmu-500", "arm,smmu-v2";
+			reg = <0xfa000000 0x40000>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 128 4>,	/* Global Secure Fault */
+				<0 129 4>, /* Global Non-secure Fault */
+				/* Non-secure Context Interrupts (32) */
+				<0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+				<0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+				<0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+				<0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+				<0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+				<0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+				<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+				<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+			stream-match-mask = <0x7ff0>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "intel,agilex-spi",
+				     "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x1000>;
+			interrupts = <0 99 4>;
+			resets = <&rst SPIM0_RESET>;
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "intel,agilex-spi",
+				     "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x1000>;
+			interrupts = <0 100 4>;
+			resets = <&rst SPIM1_RESET>;
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd12000 {
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
+			reg = <0xffd12000 0x500>;
+		};
+
+		/* Local timer */
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
+		};
+
+		timer0: timer0@ffc03000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 113 4>;
+			reg = <0xffc03000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@ffc03100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 114 4>;
+			reg = <0xffc03100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 4>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 4>;
+			reg = <0xffd00100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 108 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-frequency = <100000000>;
+		};
+
+		uart1: serial1@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 109 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		usbphy0: usbphy@0 {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0x40000>;
+			interrupts = <0 93 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr AGILEX_USB_CLK>;
+			iommus = <&smmu 6>;
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0x40000>;
+			interrupts = <0 94 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			iommus = <&smmu 7>;
+			clocks = <&clkmgr AGILEX_USB_CLK>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 117 4>;
+			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 118 4>;
+			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@ffd00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00400 0x100>;
+			interrupts = <0 125 4>;
+			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@ffd00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00500 0x100>;
+			interrupts = <0 126 4>;
+			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		sdr: sdr@f8011100 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xf8011100 0xc0>;
+		};
+
+		eccmgr {
+			compatible = "altr,socfpga-s10-ecc-manager",
+				     "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 15 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-s10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <16 4>;
+			};
+
+			ocram-ecc@ff8cc000 {
+				compatible = "altr,socfpga-s10-ocram-ecc",
+					     "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8cc000 0x100>;
+				altr,ecc-parent = <&ocram>;
+				interrupts = <1 4>;
+			};
+
+			usb0-ecc@ff8c4000 {
+				compatible = "altr,socfpga-s10-usb-ecc",
+					     "altr,socfpga-usb-ecc";
+				reg = <0xff8c4000 0x100>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 4>;
+			};
+
+			emac0-rx-ecc@ff8c0000 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0000 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 4>;
+			};
+
+			emac0-tx-ecc@ff8c0400 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0400 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 4>;
+			};
+
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+
+		qspi: spi@ff8d2000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <0 3 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+
+			status = "disabled";
+		};
+
+		firmware {
+			svc {
+				compatible = "intel,stratix10-svc";
+				method = "smc";
+				memory-region = <&service_reserved>;
+
+				fpga_mgr: fpga-mgr {
+					compatible = "intel,stratix10-soc-fpga-mgr";
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
new file mode 100644
index 000000000..6cac36a1f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2019 Intel Corporation <www.intel.com>
+ */
+
+#include "socfpga_agilex-u-boot.dtsi"
+
+/{
+	aliases {
+		spi0 = &qspi;
+		i2c0 = &i2c1;
+	};
+
+	memory {
+		/* 8GB */
+		reg = <0 0x00000000 0 0x80000000>,
+		      <2 0x80000000 1 0x80000000>;
+	};
+};
+
+&flash0 {
+	compatible = "jedec,spi-nor";
+	spi-tx-bus-width = <4>;
+	spi-rx-bus-width = <4>;
+	u-boot,dm-pre-reloc;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mmc {
+	drvsel = <3>;
+	smplsel = <0>;
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	status = "okay";
+};
+
+&watchdog0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_agilex_socdk.dts b/roms/u-boot/arch/arm/dts/socfpga_agilex_socdk.dts
new file mode 100644
index 000000000..bcdeecc0e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_agilex_socdk.dts
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex SoCDK";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&qspi {
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mt25qu02g";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x034B0000>;
+			};
+
+			qspi_rootfs: partition@34B0000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x034B0000 0x0EB50000>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10-handoff.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria10-handoff.dtsi
new file mode 100644
index 000000000..c08371625
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10-handoff.dtsi
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		altera_arria10_hps_eosc1: altera_arria10_hps_eosc1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <EOSC1_CLK_HZ>;
+			clock-output-names = "altera_arria10_hps_eosc1-clk";
+			u-boot,dm-pre-reloc;
+		};
+
+		altera_arria10_hps_cb_intosc_ls: altera_arria10_hps_cb_intosc_ls {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <CB_INTOSC_LS_CLK_HZ>;
+			clock-output-names = "altera_arria10_hps_cb_intosc_ls-clk";
+			u-boot,dm-pre-reloc;
+		};
+
+		/* Clock source: altera_arria10_hps_f2h_free */
+		altera_arria10_hps_f2h_free: altera_arria10_hps_f2h_free {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <F2H_FREE_CLK_HZ>;
+			clock-output-names = "altera_arria10_hps_f2h_free-clk";
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clkmgr@0xffd04000 {
+		compatible = "altr,socfpga-a10-clk-init";
+		reg = <0xffd04000 0x00000200>;
+		reg-names = "soc_clock_manager_OCP_SLV";
+		u-boot,dm-pre-reloc;
+
+		mainpll {
+			vco0-psrc = <MAINPLLGRP_VCO0_PSRC>;
+			vco1-denom = <MAINPLLGRP_VCO1_DENOM>;
+			vco1-numer = <MAINPLLGRP_VCO1_NUMER>;
+			mpuclk-cnt = <MAINPLLGRP_MPUCLK_CNT>;
+			mpuclk-src = <MAINPLLGRP_MPUCLK_SRC>;
+			nocclk-cnt = <MAINPLLGRP_NOCCLK_CNT>;
+			nocclk-src = <MAINPLLGRP_NOCCLK_SRC>;
+			cntr2clk-cnt = <MAINPLLGRP_CNTR2CLK_CNT>;
+			cntr3clk-cnt = <MAINPLLGRP_CNTR3CLK_CNT>;
+			cntr4clk-cnt = <MAINPLLGRP_CNTR4CLK_CNT>;
+			cntr5clk-cnt = <MAINPLLGRP_CNTR5CLK_CNT>;
+			cntr6clk-cnt = <MAINPLLGRP_CNTR6CLK_CNT>;
+			cntr7clk-cnt = <MAINPLLGRP_CNTR7CLK_CNT>;
+			cntr7clk-src = <MAINPLLGRP_CNTR7CLK_SRC>;
+			cntr8clk-cnt = <MAINPLLGRP_CNTR8CLK_CNT>;
+			cntr9clk-cnt = <MAINPLLGRP_CNTR9CLK_CNT>;
+			cntr9clk-src = <MAINPLLGRP_CNTR9CLK_SRC>;
+			cntr15clk-cnt = <MAINPLLGRP_CNTR15CLK_CNT>;
+			nocdiv-l4mainclk = <MAINPLLGRP_NOCDIV_L4MAINCLK>;
+			nocdiv-l4mpclk = <MAINPLLGRP_NOCDIV_L4MPCLK>;
+			nocdiv-l4spclk = <MAINPLLGRP_NOCDIV_L4SPCLK>;
+			nocdiv-csatclk = <MAINPLLGRP_NOCDIV_CSATCLK>;
+			nocdiv-cstraceclk = <MAINPLLGRP_NOCDIV_CSTRACECLK>;
+			nocdiv-cspdbgclk = <MAINPLLGRP_NOCDIV_CSPDBGCLK>;
+			u-boot,dm-pre-reloc;
+		};
+
+		perpll {
+			vco0-psrc = <PERPLLGRP_VCO0_PSRC>;
+			vco1-denom = <PERPLLGRP_VCO1_DENOM>;
+			vco1-numer = <PERPLLGRP_VCO1_NUMER>;
+			cntr2clk-cnt = <PERPLLGRP_CNTR2CLK_CNT>;
+			cntr2clk-src = <PERPLLGRP_CNTR2CLK_SRC>;
+			cntr3clk-cnt = <PERPLLGRP_CNTR3CLK_CNT>;
+			cntr3clk-src = <PERPLLGRP_CNTR3CLK_SRC>;
+			cntr4clk-cnt = <PERPLLGRP_CNTR4CLK_CNT>;
+			cntr4clk-src = <PERPLLGRP_CNTR4CLK_SRC>;
+			cntr5clk-cnt = <PERPLLGRP_CNTR5CLK_CNT>;
+			cntr5clk-src = <PERPLLGRP_CNTR5CLK_SRC>;
+			cntr6clk-cnt = <PERPLLGRP_CNTR6CLK_CNT>;
+			cntr6clk-src = <PERPLLGRP_CNTR6CLK_SRC>;
+			cntr7clk-cnt = <PERPLLGRP_CNTR7CLK_CNT>;
+			cntr8clk-cnt = <PERPLLGRP_CNTR8CLK_CNT>;
+			cntr8clk-src = <PERPLLGRP_CNTR8CLK_SRC>;
+			cntr9clk-cnt = <PERPLLGRP_CNTR9CLK_CNT>;
+			emacctl-emac0sel = <PERPLLGRP_EMACCTL_EMAC0SEL>;
+			emacctl-emac1sel = <PERPLLGRP_EMACCTL_EMAC1SEL>;
+			emacctl-emac2sel = <PERPLLGRP_EMACCTL_EMAC2SEL>;
+			gpiodiv-gpiodbclk = <PERPLLGRP_GPIODIV_GPIODBCLK>;
+			u-boot,dm-pre-reloc;
+		};
+
+		alteragrp {
+			nocclk = <ALTERAGRP_NOCCLK>;
+			mpuclk = <ALTERAGRP_MPUCLK>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	i_io48_pin_mux: pinmux@0xffd07000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "pinctrl-single";
+		reg = <0xffd07000 0x00000800>;
+		reg-names = "soc_3v_io48_pin_mux_OCP_SLV";
+		u-boot,dm-pre-reloc;
+
+		shared {
+			reg = <0xffd07000 0x00000200>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+			pinctrl-single,pins =
+				<0x00000000 PINMUX_SHARED_IO_Q1_1_SEL>,
+				<0x00000004 PINMUX_SHARED_IO_Q1_2_SEL>,
+				<0x00000008 PINMUX_SHARED_IO_Q1_3_SEL>,
+				<0x0000000c PINMUX_SHARED_IO_Q1_4_SEL>,
+				<0x00000010 PINMUX_SHARED_IO_Q1_5_SEL>,
+				<0x00000014 PINMUX_SHARED_IO_Q1_6_SEL>,
+				<0x00000018 PINMUX_SHARED_IO_Q1_7_SEL>,
+				<0x0000001c PINMUX_SHARED_IO_Q1_8_SEL>,
+				<0x00000020 PINMUX_SHARED_IO_Q1_9_SEL>,
+				<0x00000024 PINMUX_SHARED_IO_Q1_10_SEL>,
+				<0x00000028 PINMUX_SHARED_IO_Q1_11_SEL>,
+				<0x0000002c PINMUX_SHARED_IO_Q1_12_SEL>,
+				<0x00000030 PINMUX_SHARED_IO_Q2_1_SEL>,
+				<0x00000034 PINMUX_SHARED_IO_Q2_2_SEL>,
+				<0x00000038 PINMUX_SHARED_IO_Q2_3_SEL>,
+				<0x0000003c PINMUX_SHARED_IO_Q2_4_SEL>,
+				<0x00000040 PINMUX_SHARED_IO_Q2_5_SEL>,
+				<0x00000044 PINMUX_SHARED_IO_Q2_6_SEL>,
+				<0x00000048 PINMUX_SHARED_IO_Q2_7_SEL>,
+				<0x0000004c PINMUX_SHARED_IO_Q2_8_SEL>,
+				<0x00000050 PINMUX_SHARED_IO_Q2_9_SEL>,
+				<0x00000054 PINMUX_SHARED_IO_Q2_10_SEL>,
+				<0x00000058 PINMUX_SHARED_IO_Q2_11_SEL>,
+				<0x0000005c PINMUX_SHARED_IO_Q2_12_SEL>,
+				<0x00000060 PINMUX_SHARED_IO_Q3_1_SEL>,
+				<0x00000064 PINMUX_SHARED_IO_Q3_2_SEL>,
+				<0x00000068 PINMUX_SHARED_IO_Q3_3_SEL>,
+				<0x0000006c PINMUX_SHARED_IO_Q3_4_SEL>,
+				<0x00000070 PINMUX_SHARED_IO_Q3_5_SEL>,
+				<0x00000074 PINMUX_SHARED_IO_Q3_6_SEL>,
+				<0x00000078 PINMUX_SHARED_IO_Q3_7_SEL>,
+				<0x0000007c PINMUX_SHARED_IO_Q3_8_SEL>,
+				<0x00000080 PINMUX_SHARED_IO_Q3_9_SEL>,
+				<0x00000084 PINMUX_SHARED_IO_Q3_10_SEL>,
+				<0x00000088 PINMUX_SHARED_IO_Q3_11_SEL>,
+				<0x0000008c PINMUX_SHARED_IO_Q3_12_SEL>,
+				<0x00000090 PINMUX_SHARED_IO_Q4_1_SEL>,
+				<0x00000094 PINMUX_SHARED_IO_Q4_2_SEL>,
+				<0x00000098 PINMUX_SHARED_IO_Q4_3_SEL>,
+				<0x0000009c PINMUX_SHARED_IO_Q4_4_SEL>,
+				<0x000000a0 PINMUX_SHARED_IO_Q4_5_SEL>,
+				<0x000000a4 PINMUX_SHARED_IO_Q4_6_SEL>,
+				<0x000000a8 PINMUX_SHARED_IO_Q4_7_SEL>,
+				<0x000000ac PINMUX_SHARED_IO_Q4_8_SEL>,
+				<0x000000b0 PINMUX_SHARED_IO_Q4_9_SEL>,
+				<0x000000b4 PINMUX_SHARED_IO_Q4_10_SEL>,
+				<0x000000b8 PINMUX_SHARED_IO_Q4_11_SEL>,
+				<0x000000bc PINMUX_SHARED_IO_Q4_12_SEL>;
+			u-boot,dm-pre-reloc;
+		};
+
+		dedicated {
+			reg = <0xffd07200 0x00000200>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+			pinctrl-single,pins =
+				<0x0000000c PINMUX_DEDICATED_IO_4_SEL>,
+				<0x00000010 PINMUX_DEDICATED_IO_5_SEL>,
+				<0x00000014 PINMUX_DEDICATED_IO_6_SEL>,
+				<0x00000018 PINMUX_DEDICATED_IO_7_SEL>,
+				<0x0000001c PINMUX_DEDICATED_IO_8_SEL>,
+				<0x00000020 PINMUX_DEDICATED_IO_9_SEL>,
+				<0x00000024 PINMUX_DEDICATED_IO_10_SEL>,
+				<0x00000028 PINMUX_DEDICATED_IO_11_SEL>,
+				<0x0000002c PINMUX_DEDICATED_IO_12_SEL>,
+				<0x00000030 PINMUX_DEDICATED_IO_13_SEL>,
+				<0x00000034 PINMUX_DEDICATED_IO_14_SEL>,
+				<0x00000038 PINMUX_DEDICATED_IO_15_SEL>,
+				<0x0000003c PINMUX_DEDICATED_IO_16_SEL>,
+				<0x00000040 PINMUX_DEDICATED_IO_17_SEL>;
+			u-boot,dm-pre-reloc;
+		};
+
+		dedicated_cfg {
+			reg = <0xffd07200 0x00000200>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x003f3f3f>;
+			pinctrl-single,pins =
+				<0x00000100 CONFIG_IO_BANK_VSEL>,
+				<0x00000104 CONFIG_IO_MACRO (CONFIG_IO_1)>,
+				<0x00000108 CONFIG_IO_MACRO (CONFIG_IO_2)>,
+				<0x0000010c CONFIG_IO_MACRO (CONFIG_IO_3)>,
+				<0x00000110 CONFIG_IO_MACRO (CONFIG_IO_4)>,
+				<0x00000114 CONFIG_IO_MACRO (CONFIG_IO_5)>,
+				<0x00000118 CONFIG_IO_MACRO (CONFIG_IO_6)>,
+				<0x0000011c CONFIG_IO_MACRO (CONFIG_IO_7)>,
+				<0x00000120 CONFIG_IO_MACRO (CONFIG_IO_8)>,
+				<0x00000124 CONFIG_IO_MACRO (CONFIG_IO_9)>,
+				<0x00000128 CONFIG_IO_MACRO (CONFIG_IO_10)>,
+				<0x0000012c CONFIG_IO_MACRO (CONFIG_IO_11)>,
+				<0x00000130 CONFIG_IO_MACRO (CONFIG_IO_12)>,
+				<0x00000134 CONFIG_IO_MACRO (CONFIG_IO_13)>,
+				<0x00000138 CONFIG_IO_MACRO (CONFIG_IO_14)>,
+				<0x0000013c CONFIG_IO_MACRO (CONFIG_IO_15)>,
+				<0x00000140 CONFIG_IO_MACRO (CONFIG_IO_16)>,
+				<0x00000144 CONFIG_IO_MACRO (CONFIG_IO_17)>;
+			u-boot,dm-pre-reloc;
+		};
+
+		fpga {
+			reg = <0xffd07400 0x00000100>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x00000001>;
+			pinctrl-single,pins =
+				<0x00000000 PINMUX_RGMII0_USEFPGA_SEL>,
+				<0x00000004 PINMUX_RGMII1_USEFPGA_SEL>,
+				<0x00000008 PINMUX_RGMII2_USEFPGA_SEL>,
+				<0x0000000c PINMUX_I2C0_USEFPGA_SEL>,
+				<0x00000010 PINMUX_I2C1_USEFPGA_SEL>,
+				<0x00000014 PINMUX_I2CEMAC0_USEFPGA_SEL>,
+				<0x00000018 PINMUX_I2CEMAC1_USEFPGA_SEL>,
+				<0x0000001c PINMUX_I2CEMAC2_USEFPGA_SEL>,
+				<0x00000020 PINMUX_NAND_USEFPGA_SEL>,
+				<0x00000024 PINMUX_QSPI_USEFPGA_SEL>,
+				<0x00000028 PINMUX_SDMMC_USEFPGA_SEL>,
+				<0x0000002c PINMUX_SPIM0_USEFPGA_SEL>,
+				<0x00000030 PINMUX_SPIM1_USEFPGA_SEL>,
+				<0x00000034 PINMUX_SPIS0_USEFPGA_SEL>,
+				<0x00000038 PINMUX_SPIS1_USEFPGA_SEL>,
+				<0x0000003c PINMUX_UART0_USEFPGA_SEL>,
+				<0x00000040 PINMUX_UART1_USEFPGA_SEL>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	i_noc: noc@0xffd10000 {
+		compatible = "altr,socfpga-a10-noc";
+		reg = <0xffd10000 0x00008000>;
+		reg-names = "mpu_m0";
+		u-boot,dm-pre-reloc;
+
+		firewall {
+			mpu0 = <0x00000000 0x0000ffff>;
+			l3-0 = <0x00000000 0x0000ffff>;
+			fpga2sdram0-0 = <0x00000000 0x0000ffff>;
+			fpga2sdram1-0 = <0x00000000 0x0000ffff>;
+			fpga2sdram2-0 = <0x00000000 0x0000ffff>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	hps_fpgabridge0: fpgabridge@0 {
+		compatible = "altr,socfpga-hps2fpga-bridge";
+		init-val = <H2F_AXI_MASTER>;
+		u-boot,dm-pre-reloc;
+	};
+
+	hps_fpgabridge1: fpgabridge@1 {
+		compatible = "altr,socfpga-lwhps2fpga-bridge";
+		init-val = <LWH2F_AXI_MASTER>;
+		u-boot,dm-pre-reloc;
+	};
+
+	hps_fpgabridge2: fpgabridge@2 {
+		compatible = "altr,socfpga-fpga2hps-bridge";
+		init-val = <F2H_AXI_SLAVE>;
+		u-boot,dm-pre-reloc;
+	};
+
+	hps_fpgabridge3: fpgabridge@3 {
+		compatible = "altr,socfpga-fpga2sdram0-bridge";
+		init-val = <F2SDRAM0_AXI_SLAVE>;
+		u-boot,dm-pre-reloc;
+	};
+
+	hps_fpgabridge4: fpgabridge@4 {
+		compatible = "altr,socfpga-fpga2sdram1-bridge";
+		init-val = <F2SDRAM1_AXI_SLAVE>;
+		u-boot,dm-pre-reloc;
+	};
+
+	hps_fpgabridge5: fpgabridge@5 {
+		compatible = "altr,socfpga-fpga2sdram2-bridge";
+		init-val = <F2SDRAM2_AXI_SLAVE>;
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria10-u-boot.dtsi
new file mode 100644
index 000000000..6ff1ea6e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10-u-boot.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2014, 2020, Intel Corporation
+ */
+
+/ {
+	chosen {
+		tick-timer = &timer2;
+		u-boot,dm-pre-reloc;
+	};
+
+	memory@0 {
+		u-boot,dm-pre-reloc;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&clkmgr {
+	u-boot,dm-pre-reloc;
+
+	clocks {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&cb_intosc_hs_div2_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&cb_intosc_ls_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&f2s_free_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&gmac0 {
+	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+	altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+};
+
+&gmac1 {
+	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+	altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+};
+
+&gmac2 {
+	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+	altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
+};
+
+&i2c0 {
+	reset-names = "i2c";
+};
+
+&i2c1 {
+	reset-names = "i2c";
+};
+
+&i2c2 {
+	reset-names = "i2c";
+};
+
+&i2c3 {
+	reset-names = "i2c";
+};
+
+&i2c4 {
+	reset-names = "i2c";
+};
+
+&L2 {
+	u-boot,dm-pre-reloc;
+};
+
+&l4_mp_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&l4_sp_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&l4_sys_free_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&main_periph_ref_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&main_pll {
+	u-boot,dm-pre-reloc;
+};
+
+&main_noc_base_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&noc_free_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&osc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&peri_noc_base_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&periph_pll {
+	u-boot,dm-pre-reloc;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&rst {
+	u-boot,dm-pre-reloc;
+};
+
+&sysmgr {
+	u-boot,dm-pre-reloc;
+};
+
+&timer2 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria10.dtsi
new file mode 100644
index 000000000..bab34ab56
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10.dtsi
@@ -0,0 +1,903 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "altr,socfpga-a10-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	intc: intc@ffffd000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xffffd000 0x1000>,
+		      <0xffffc100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffda1000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffda1000 0x1000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 84 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 86 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+				reset-names = "dma", "dma-ocp";
+			};
+		};
+
+		base_fpga_region {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
+		clkmgr: clkmgr@ffd04000 {
+				compatible = "altr,clk-mgr";
+				reg = <0xffd04000 0x1000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					cb_intosc_ls_clk: cb_intosc_ls_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_free_clk: f2s_free_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					main_pll: main_pll@40 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x40>;
+
+						main_mpu_base_clk: main_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x140 0 11>;
+						};
+
+						main_noc_base_clk: main_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x144 0 11>;
+						};
+
+						main_emaca_clk: main_emaca_clk@68 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x68>;
+						};
+
+						main_emacb_clk: main_emacb_clk@6c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x6C>;
+						};
+
+						main_emac_ptp_clk: main_emac_ptp_clk@70 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x70>;
+						};
+
+						main_gpio_db_clk: main_gpio_db_clk@74 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x74>;
+						};
+
+						main_sdmmc_clk: main_sdmmc_clk@78 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk"
+;
+							clocks = <&main_pll>;
+							reg = <0x78>;
+						};
+
+						main_s2f_usr0_clk: main_s2f_usr0_clk@7c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x7C>;
+						};
+
+						main_s2f_usr1_clk: main_s2f_usr1_clk@80 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x80>;
+						};
+
+						main_hmc_pll_ref_clk: main_hmc_pll_ref_clk@84 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x84>;
+						};
+
+						main_periph_ref_clk: main_periph_ref_clk@9c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x9C>;
+						};
+					};
+
+					periph_pll: periph_pll@c0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>, <&main_periph_ref_clk>;
+						reg = <0xC0>;
+
+						peri_mpu_base_clk: peri_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x140 16 11>;
+						};
+
+						peri_noc_base_clk: peri_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x144 16 11>;
+						};
+
+						peri_emaca_clk: peri_emaca_clk@e8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xE8>;
+						};
+
+						peri_emacb_clk: peri_emacb_clk@ec {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xEC>;
+						};
+
+						peri_emac_ptp_clk: peri_emac_ptp_clk@f0 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF0>;
+						};
+
+						peri_gpio_db_clk: peri_gpio_db_clk@f4 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF4>;
+						};
+
+						peri_sdmmc_clk: peri_sdmmc_clk@f8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF8>;
+						};
+
+						peri_s2f_usr0_clk: peri_s2f_usr0_clk@fc {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xFC>;
+						};
+
+						peri_s2f_usr1_clk: peri_s2f_usr1_clk@100 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x100>;
+						};
+
+						peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk@104 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x104>;
+						};
+					};
+
+					mpu_free_clk: mpu_free_clk@60 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x60>;
+					};
+
+					noc_free_clk: noc_free_clk@64 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x64>;
+					};
+
+					s2f_user1_free_clk: s2f_user1_free_clk@104 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x104>;
+					};
+
+					sdmmc_free_clk: sdmmc_free_clk@f8 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						fixed-divider = <4>;
+						reg = <0xF8>;
+					};
+
+					l4_sys_free_clk: l4_sys_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&noc_free_clk>;
+						fixed-divider = <4>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 0 2>;
+						clk-gate = <0x48 1>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 8 2>;
+						clk-gate = <0x48 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 16 2>;
+						clk-gate = <0x48 3>;
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&mpu_free_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0x48 0>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&sdmmc_free_clk>;
+						clk-gate = <0xC8 5>;
+						clk-phase = <0 135>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 11>;
+					};
+
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0xC8 10>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 9>;
+					};
+
+					usb_clk: usb_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 8>;
+					};
+
+					s2f_usr1_clk: s2f_usr1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&peri_s2f_usr1_clk>;
+						clk-gate = <0xC8 6>;
+					};
+				};
+		};
+
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+		        reg = <0xff802000 0x2000>;
+			interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02900 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02a00 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02b00 0x100>;
+			resets = <&rst GPIO2_RESET>;
+			status = "disabled";
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		fpga_mgr: fpga-mgr@ffd03000 {
+			compatible = "altr,socfpga-a10-fpga-mgr";
+			reg = <0xffd03000 0x100
+			       0xffcfe400 0x20>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst FPGAMGR_RESET>;
+			reset-names = "fpgamgr";
+		};
+
+		i2c0: i2c@ffc02200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02200 0x100>;
+			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C0_RESET>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02300 0x100>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C1_RESET>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02400 0x100>;
+			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C2_RESET>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02500 0x100>;
+			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C3_RESET>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02600 0x100>;
+			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C4_RESET>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "altr,socfpga-arria10-spi",
+				     "snps,dw-apb-ssi-3.22a", "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x100>;
+			interrupts = <0 101 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "altr,socfpga-arria10-spi",
+				     "snps,dw-apb-ssi-3.22a", "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x100>;
+			interrupts = <0 102 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			tx-dma-channel = <&pdma 16>;
+			rx-dma-channel = <&pdma 17>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
+			status = "disabled";
+		};
+
+		sdr: sdr@ffcfb100 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffcfb100 0x80>;
+		};
+
+		L2: l2-cache@fffff000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffff000 0x1000>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
+		};
+
+		mmc: dwmmc0@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <0x400>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
+			status = "disabled";
+		};
+
+		nand: nand@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x72000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 99 4>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x40000>;
+		};
+
+		eccmgr: eccmgr {
+			compatible = "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-a10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+					     <49 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			l2-ecc@ffd06010 {
+				compatible = "altr,socfpga-a10-l2-ecc";
+				reg = <0xffd06010 0x4>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+					     <32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ocram-ecc@ff8c3000 {
+				compatible = "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8c3000 0x400>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+					     <33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-rx-ecc@ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			dma-ecc@ff8c8000 {
+				compatible = "altr,socfpga-dma-ecc";
+				reg = <0xff8c8000 0x400>;
+				altr,ecc-parent = <&pdma>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+					     <42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c8800 {
+				compatible = "altr,socfpga-usb-ecc";
+				reg = <0xff8c8800 0x400>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <34 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qspi: spi@ff809000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff809000 0x100>,
+			      <0xffa00000 0x100000>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+			reset-names = "qspi", "qspi-ocp";
+			status = "disabled";
+		};
+
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x100>;
+			altr,modrst-offset = <0x20>;
+		};
+
+		scu: snoop-control-unit@ffffc000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xffffc000 0x100>;
+		};
+
+		sysmgr: sysmgr@ffd06000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd06000 0x300>;
+			cpu1-start-addr = <0xffd06230>;
+		};
+
+		/* Local timer */
+		timer@ffffc600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xffffc600 0x100>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&mpu_periph_clk>;
+		};
+
+		timer0: timer0@ffc02700 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02700 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer1: timer1@ffc02800 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02800 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
+			resets = <&rst L4SYSTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd01000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
+			resets = <&rst L4SYSTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+		};
+
+		uart1: serial1@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst UART1_RESET>;
+			status = "disabled";
+		};
+
+		usbphy0: usbphy {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD0_RESET>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD1_RESET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10_handoff_u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria10_handoff_u-boot.dtsi
new file mode 100644
index 000000000..ef215230c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10_handoff_u-boot.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+	};
+
+	clocks {
+		u-boot,dm-pre-reloc;
+
+		altera_arria10_hps_eosc1 {
+			u-boot,dm-pre-reloc;
+		};
+
+		altera_arria10_hps_cb_intosc_ls {
+			u-boot,dm-pre-reloc;
+		};
+
+		altera_arria10_hps_f2h_free {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clock_manager@0xffd04000 {
+		u-boot,dm-pre-reloc;
+
+		mainpll {
+			u-boot,dm-pre-reloc;
+		};
+
+		perpll {
+			u-boot,dm-pre-reloc;
+		};
+
+		alteragrp {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	pinmux@0xffd07000 {
+		u-boot,dm-pre-reloc;
+
+		shared {
+			u-boot,dm-pre-reloc;
+		};
+
+		dedicated {
+			u-boot,dm-pre-reloc;
+		};
+
+		dedicated_cfg {
+			u-boot,dm-pre-reloc;
+		};
+
+		fpga {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	noc@0xffd10000 {
+		u-boot,dm-pre-reloc;
+
+		firewall {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	fpgabridge@0 {
+		u-boot,dm-pre-reloc;
+	};
+
+	fpgabridge@1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	fpgabridge@2 {
+		u-boot,dm-pre-reloc;
+	};
+
+	fpgabridge@3 {
+		u-boot,dm-pre-reloc;
+	};
+
+	fpgabridge@4 {
+		u-boot,dm-pre-reloc;
+	};
+
+	fpgabridge@5 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk-u-boot.dtsi
new file mode 100644
index 000000000..22e614d04
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk-u-boot.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015, 2020 Intel. All rights reserved.
+ */
+
+#include "socfpga_arria10-u-boot.dtsi"
+
+/ {
+	aliases {
+		bootargs = "console=ttyS0,115200";
+		i2c0 = &i2c1;
+	};
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&watchdog1 {
+        u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk.dtsi
new file mode 100644
index 000000000..0efbeccc5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ */
+#include "socfpga_arria10.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria 10";
+	compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	a10leds {
+		compatible = "gpio-leds";
+
+		a10sr_led0 {
+			label = "a10sr-led0";
+			gpios = <&a10sr_gpio 0 1>;
+		};
+
+		a10sr_led1 {
+			label = "a10sr-led1";
+			gpios = <&a10sr_gpio 1 1>;
+		};
+
+		a10sr_led2 {
+			label = "a10sr-led2";
+			gpios = <&a10sr_gpio 2 1>;
+		};
+
+		a10sr_led3 {
+			label = "a10sr-led3";
+			gpios = <&a10sr_gpio 3 1>;
+		};
+	};
+
+	ref_033v: 033-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+
+	/*
+	 * These skews assume the user's FPGA design is adding 600ps of delay
+	 * for TX_CLK on Arria 10.
+	 *
+	 * All skews are offset since hardware skew values for the ksz9031
+	 * range from a negative skew to a positive skew.
+	 * See the micrel-ksz90x1.txt Documentation file for details.
+	 */
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+	max-frame-size = <3800>;
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	resource-manager@0 {
+		compatible = "altr,a10sr";
+		reg = <0>;
+		spi-max-frequency = <100000>;
+		/* low-level active IRQ at GPIO1_5 */
+		interrupt-parent = <&portb>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		a10sr_gpio: gpio-controller {
+			compatible = "altr,a10sr-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		a10sr_rst: reset-controller {
+			compatible = "altr,a10sr-reset";
+			#reset-cells = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <6000>;
+	i2c-scl-falling-time-ns = <6000>;
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&ref_033v>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+
+	ltc@5c {
+		compatible = "ltc2977";
+		reg = <0x5c>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc-u-boot.dtsi
new file mode 100644
index 000000000..298c337ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc-u-boot.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2015, 2020 Intel. All rights reserved.
+ */
+
+#include "socfpga_arria10_socdk_sdmmc_handoff.h"
+#include "socfpga_arria10-handoff.dtsi"
+#include "socfpga_arria10_handoff_u-boot.dtsi"
+#include "socfpga_arria10_socdk-u-boot.dtsi"
+
+/ {
+	chosen {
+		firmware-loader = <&fs_loader0>;
+	};
+
+	fs_loader0: fs-loader {
+		u-boot,dm-pre-reloc;
+		compatible = "u-boot,fs-loader";
+		phandlepart = <&mmc 1>;
+	};
+};
+
+&fpga_mgr {
+	u-boot,dm-pre-reloc;
+	altr,bitstream = "fit_spl_fpga.itb";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+/* Clock available early */
+&main_sdmmc_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&peri_sdmmc_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc_free_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc_clk {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 000000000..64dc0799f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+};
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.h b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.h
new file mode 100644
index 000000000..4e3fe3057
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.h
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Intel Arria 10 SoCFPGA configuration
+ */
+
+#ifndef __SOCFPGA_ARRIA10_CONFIG_H__
+#define __SOCFPGA_ARRIA10_CONFIG_H__
+
+/* Clocks */
+#define CB_INTOSC_LS_CLK_HZ 60000000
+#define EMAC0_CLK_HZ 250000000
+#define EMAC1_CLK_HZ 250000000
+#define EMAC2_CLK_HZ 250000000
+#define EOSC1_CLK_HZ 25000000
+#define F2H_FREE_CLK_HZ 200000000
+#define H2F_USER0_CLK_HZ 400000000
+#define H2F_USER1_CLK_HZ 400000000
+#define L3_MAIN_FREE_CLK_HZ 200000000
+#define SDMMC_CLK_HZ 200000000
+#define TPIU_CLK_HZ 100000000
+#define MAINPLLGRP_CNTR15CLK_CNT 900
+#define MAINPLLGRP_CNTR2CLK_CNT 900
+#define MAINPLLGRP_CNTR3CLK_CNT 900
+#define MAINPLLGRP_CNTR4CLK_CNT 900
+#define MAINPLLGRP_CNTR5CLK_CNT 900
+#define MAINPLLGRP_CNTR6CLK_CNT 900
+#define MAINPLLGRP_CNTR7CLK_CNT 900
+#define MAINPLLGRP_CNTR7CLK_SRC 0
+#define MAINPLLGRP_CNTR8CLK_CNT 900
+#define MAINPLLGRP_CNTR9CLK_CNT 900
+#define MAINPLLGRP_CNTR9CLK_SRC 0
+#define MAINPLLGRP_MPUCLK_CNT 0
+#define MAINPLLGRP_MPUCLK_SRC 0
+#define MAINPLLGRP_NOCCLK_CNT 0
+#define MAINPLLGRP_NOCCLK_SRC 0
+#define MAINPLLGRP_NOCDIV_CSATCLK 0
+#define MAINPLLGRP_NOCDIV_CSPDBGCLK 1
+#define MAINPLLGRP_NOCDIV_CSTRACECLK 1
+#define MAINPLLGRP_NOCDIV_L4MAINCLK 0
+#define MAINPLLGRP_NOCDIV_L4MPCLK 0
+#define MAINPLLGRP_NOCDIV_L4SPCLK 2
+#define MAINPLLGRP_VCO0_PSRC 0
+#define MAINPLLGRP_VCO1_DENOM 1
+#define MAINPLLGRP_VCO1_NUMER 191
+#define PERPLLGRP_CNTR2CLK_CNT 7
+#define PERPLLGRP_CNTR2CLK_SRC 1
+#define PERPLLGRP_CNTR3CLK_CNT 900
+#define PERPLLGRP_CNTR3CLK_SRC 1
+#define PERPLLGRP_CNTR4CLK_CNT 19
+#define PERPLLGRP_CNTR4CLK_SRC 1
+#define PERPLLGRP_CNTR5CLK_CNT 499
+#define PERPLLGRP_CNTR5CLK_SRC 1
+#define PERPLLGRP_CNTR6CLK_CNT 9
+#define PERPLLGRP_CNTR6CLK_SRC 1
+#define PERPLLGRP_CNTR7CLK_CNT 900
+#define PERPLLGRP_CNTR8CLK_CNT 900
+#define PERPLLGRP_CNTR8CLK_SRC 0
+#define PERPLLGRP_CNTR9CLK_CNT 900
+#define PERPLLGRP_EMACCTL_EMAC0SEL 0
+#define PERPLLGRP_EMACCTL_EMAC1SEL 0
+#define PERPLLGRP_EMACCTL_EMAC2SEL 0
+#define PERPLLGRP_GPIODIV_GPIODBCLK 32000
+#define PERPLLGRP_VCO0_PSRC 0
+#define PERPLLGRP_VCO1_DENOM 1
+#define PERPLLGRP_VCO1_NUMER 159
+#define CLKMGR_TESTIOCTRL_DEBUGCLKSEL 16
+#define CLKMGR_TESTIOCTRL_MAINCLKSEL 8
+#define CLKMGR_TESTIOCTRL_PERICLKSEL 8
+#define ALTERAGRP_MPUCLK_MAINCNT 1
+#define ALTERAGRP_MPUCLK_PERICNT 900
+#define ALTERAGRP_NOCCLK_MAINCNT 11
+#define ALTERAGRP_NOCCLK_PERICNT 900
+#define ALTERAGRP_MPUCLK ((ALTERAGRP_MPUCLK_PERICNT << 16) | \
+	(ALTERAGRP_MPUCLK_MAINCNT))
+#define ALTERAGRP_NOCCLK ((ALTERAGRP_NOCCLK_PERICNT << 16) | \
+	(ALTERAGRP_NOCCLK_MAINCNT))
+
+/* Pin Mux Configuration */
+#define CONFIG_IO_10_INPUT_BUF_EN 0
+#define CONFIG_IO_10_PD_DRV_STRG 0
+#define CONFIG_IO_10_PD_SLW_RT 0
+#define CONFIG_IO_10_PU_DRV_STRG 0
+#define CONFIG_IO_10_PU_SLW_RT 0
+#define CONFIG_IO_10_RTRIM 1
+#define CONFIG_IO_10_WK_PU_EN 1
+#define CONFIG_IO_11_INPUT_BUF_EN 0
+#define CONFIG_IO_11_PD_DRV_STRG 0
+#define CONFIG_IO_11_PD_SLW_RT 0
+#define CONFIG_IO_11_PU_DRV_STRG 0
+#define CONFIG_IO_11_PU_SLW_RT 0
+#define CONFIG_IO_11_RTRIM 1
+#define CONFIG_IO_11_WK_PU_EN 1
+#define CONFIG_IO_12_INPUT_BUF_EN 1
+#define CONFIG_IO_12_PD_DRV_STRG 10
+#define CONFIG_IO_12_PD_SLW_RT 1
+#define CONFIG_IO_12_PU_DRV_STRG 8
+#define CONFIG_IO_12_PU_SLW_RT 1
+#define CONFIG_IO_12_RTRIM 1
+#define CONFIG_IO_12_WK_PU_EN 1
+#define CONFIG_IO_13_INPUT_BUF_EN 1
+#define CONFIG_IO_13_PD_DRV_STRG 10
+#define CONFIG_IO_13_PD_SLW_RT 1
+#define CONFIG_IO_13_PU_DRV_STRG 8
+#define CONFIG_IO_13_PU_SLW_RT 1
+#define CONFIG_IO_13_RTRIM 1
+#define CONFIG_IO_13_WK_PU_EN 1
+#define CONFIG_IO_14_INPUT_BUF_EN 1
+#define CONFIG_IO_14_PD_DRV_STRG 10
+#define CONFIG_IO_14_PD_SLW_RT 1
+#define CONFIG_IO_14_PU_DRV_STRG 8
+#define CONFIG_IO_14_PU_SLW_RT 1
+#define CONFIG_IO_14_RTRIM 1
+#define CONFIG_IO_14_WK_PU_EN 1
+#define CONFIG_IO_15_INPUT_BUF_EN 1
+#define CONFIG_IO_15_PD_DRV_STRG 10
+#define CONFIG_IO_15_PD_SLW_RT 1
+#define CONFIG_IO_15_PU_DRV_STRG 8
+#define CONFIG_IO_15_PU_SLW_RT 1
+#define CONFIG_IO_15_RTRIM 1
+#define CONFIG_IO_15_WK_PU_EN 1
+#define CONFIG_IO_16_INPUT_BUF_EN 0
+#define CONFIG_IO_16_PD_DRV_STRG 10
+#define CONFIG_IO_16_PD_SLW_RT 1
+#define CONFIG_IO_16_PU_DRV_STRG 8
+#define CONFIG_IO_16_PU_SLW_RT 1
+#define CONFIG_IO_16_RTRIM 1
+#define CONFIG_IO_16_WK_PU_EN 0
+#define CONFIG_IO_17_INPUT_BUF_EN 1
+#define CONFIG_IO_17_PD_DRV_STRG 10
+#define CONFIG_IO_17_PD_SLW_RT 1
+#define CONFIG_IO_17_PU_DRV_STRG 8
+#define CONFIG_IO_17_PU_SLW_RT 1
+#define CONFIG_IO_17_RTRIM 1
+#define CONFIG_IO_17_WK_PU_EN 0
+#define CONFIG_IO_1_INPUT_BUF_EN 1
+#define CONFIG_IO_1_PD_DRV_STRG 10
+#define CONFIG_IO_1_PD_SLW_RT 0
+#define CONFIG_IO_1_PU_DRV_STRG 8
+#define CONFIG_IO_1_PU_SLW_RT 0
+#define CONFIG_IO_1_RTRIM 1
+#define CONFIG_IO_1_WK_PU_EN 1
+#define CONFIG_IO_2_INPUT_BUF_EN 1
+#define CONFIG_IO_2_PD_DRV_STRG 10
+#define CONFIG_IO_2_PD_SLW_RT 0
+#define CONFIG_IO_2_PU_DRV_STRG 8
+#define CONFIG_IO_2_PU_SLW_RT 0
+#define CONFIG_IO_2_RTRIM 1
+#define CONFIG_IO_2_WK_PU_EN 1
+#define CONFIG_IO_3_INPUT_BUF_EN 1
+#define CONFIG_IO_3_PD_DRV_STRG 10
+#define CONFIG_IO_3_PD_SLW_RT 0
+#define CONFIG_IO_3_PU_DRV_STRG 8
+#define CONFIG_IO_3_PU_SLW_RT 0
+#define CONFIG_IO_3_RTRIM 1
+#define CONFIG_IO_3_WK_PU_EN 1
+#define CONFIG_IO_4_INPUT_BUF_EN 1
+#define CONFIG_IO_4_PD_DRV_STRG 10
+#define CONFIG_IO_4_PD_SLW_RT 1
+#define CONFIG_IO_4_PU_DRV_STRG 8
+#define CONFIG_IO_4_PU_SLW_RT 1
+#define CONFIG_IO_4_RTRIM 1
+#define CONFIG_IO_4_WK_PU_EN 0
+#define CONFIG_IO_5_INPUT_BUF_EN 1
+#define CONFIG_IO_5_PD_DRV_STRG 10
+#define CONFIG_IO_5_PD_SLW_RT 1
+#define CONFIG_IO_5_PU_DRV_STRG 8
+#define CONFIG_IO_5_PU_SLW_RT 1
+#define CONFIG_IO_5_RTRIM 1
+#define CONFIG_IO_5_WK_PU_EN 0
+#define CONFIG_IO_6_INPUT_BUF_EN 0
+#define CONFIG_IO_6_PD_DRV_STRG 10
+#define CONFIG_IO_6_PD_SLW_RT 1
+#define CONFIG_IO_6_PU_DRV_STRG 8
+#define CONFIG_IO_6_PU_SLW_RT 1
+#define CONFIG_IO_6_RTRIM 1
+#define CONFIG_IO_6_WK_PU_EN 0
+#define CONFIG_IO_7_INPUT_BUF_EN 1
+#define CONFIG_IO_7_PD_DRV_STRG 10
+#define CONFIG_IO_7_PD_SLW_RT 1
+#define CONFIG_IO_7_PU_DRV_STRG 8
+#define CONFIG_IO_7_PU_SLW_RT 1
+#define CONFIG_IO_7_RTRIM 1
+#define CONFIG_IO_7_WK_PU_EN 0
+#define CONFIG_IO_8_INPUT_BUF_EN 1
+#define CONFIG_IO_8_PD_DRV_STRG 10
+#define CONFIG_IO_8_PD_SLW_RT 1
+#define CONFIG_IO_8_PU_DRV_STRG 8
+#define CONFIG_IO_8_PU_SLW_RT 1
+#define CONFIG_IO_8_RTRIM 1
+#define CONFIG_IO_8_WK_PU_EN 0
+#define CONFIG_IO_9_INPUT_BUF_EN 1
+#define CONFIG_IO_9_PD_DRV_STRG 10
+#define CONFIG_IO_9_PD_SLW_RT 1
+#define CONFIG_IO_9_PU_DRV_STRG 8
+#define CONFIG_IO_9_PU_SLW_RT 1
+#define CONFIG_IO_9_RTRIM 1
+#define CONFIG_IO_9_WK_PU_EN 0
+#define CONFIG_IO_BANK_VOLTAGE_SEL_CLKRST_IO 1
+#define CONFIG_IO_BANK_VOLTAGE_SEL_PERI_IO 1
+#define PINMUX_DEDICATED_IO_10_SEL 10
+#define PINMUX_DEDICATED_IO_11_SEL 10
+#define PINMUX_DEDICATED_IO_12_SEL 8
+#define PINMUX_DEDICATED_IO_13_SEL 8
+#define PINMUX_DEDICATED_IO_14_SEL 8
+#define PINMUX_DEDICATED_IO_15_SEL 8
+#define PINMUX_DEDICATED_IO_16_SEL 13
+#define PINMUX_DEDICATED_IO_17_SEL 13
+#define PINMUX_DEDICATED_IO_4_SEL 8
+#define PINMUX_DEDICATED_IO_5_SEL 8
+#define PINMUX_DEDICATED_IO_6_SEL 8
+#define PINMUX_DEDICATED_IO_7_SEL 8
+#define PINMUX_DEDICATED_IO_8_SEL 8
+#define PINMUX_DEDICATED_IO_9_SEL 8
+#define PINMUX_I2C0_USEFPGA_SEL 0
+#define PINMUX_I2C1_USEFPGA_SEL 0
+#define PINMUX_I2CEMAC0_USEFPGA_SEL 0
+#define PINMUX_I2CEMAC1_USEFPGA_SEL 0
+#define PINMUX_I2CEMAC2_USEFPGA_SEL 0
+#define PINMUX_NAND_USEFPGA_SEL 0
+#define PINMUX_PLL_CLOCK_OUT_USEFPGA_SEL 0
+#define PINMUX_QSPI_USEFPGA_SEL 0
+#define PINMUX_RGMII0_USEFPGA_SEL 0
+#define PINMUX_RGMII1_USEFPGA_SEL 0
+#define PINMUX_RGMII2_USEFPGA_SEL 0
+#define PINMUX_SDMMC_USEFPGA_SEL 0
+#define PINMUX_SHARED_IO_Q1_10_SEL 8
+#define PINMUX_SHARED_IO_Q1_11_SEL 8
+#define PINMUX_SHARED_IO_Q1_12_SEL 8
+#define PINMUX_SHARED_IO_Q1_1_SEL 8
+#define PINMUX_SHARED_IO_Q1_2_SEL 8
+#define PINMUX_SHARED_IO_Q1_3_SEL 8
+#define PINMUX_SHARED_IO_Q1_4_SEL 8
+#define PINMUX_SHARED_IO_Q1_5_SEL 8
+#define PINMUX_SHARED_IO_Q1_6_SEL 8
+#define PINMUX_SHARED_IO_Q1_7_SEL 8
+#define PINMUX_SHARED_IO_Q1_8_SEL 8
+#define PINMUX_SHARED_IO_Q1_9_SEL 8
+#define PINMUX_SHARED_IO_Q2_10_SEL 4
+#define PINMUX_SHARED_IO_Q2_11_SEL 4
+#define PINMUX_SHARED_IO_Q2_12_SEL 4
+#define PINMUX_SHARED_IO_Q2_1_SEL 4
+#define PINMUX_SHARED_IO_Q2_2_SEL 4
+#define PINMUX_SHARED_IO_Q2_3_SEL 4
+#define PINMUX_SHARED_IO_Q2_4_SEL 4
+#define PINMUX_SHARED_IO_Q2_5_SEL 4
+#define PINMUX_SHARED_IO_Q2_6_SEL 4
+#define PINMUX_SHARED_IO_Q2_7_SEL 4
+#define PINMUX_SHARED_IO_Q2_8_SEL 4
+#define PINMUX_SHARED_IO_Q2_9_SEL 4
+#define PINMUX_SHARED_IO_Q3_10_SEL 10
+#define PINMUX_SHARED_IO_Q3_11_SEL 1
+#define PINMUX_SHARED_IO_Q3_12_SEL 1
+#define PINMUX_SHARED_IO_Q3_1_SEL 3
+#define PINMUX_SHARED_IO_Q3_2_SEL 3
+#define PINMUX_SHARED_IO_Q3_3_SEL 3
+#define PINMUX_SHARED_IO_Q3_4_SEL 3
+#define PINMUX_SHARED_IO_Q3_5_SEL 3
+#define PINMUX_SHARED_IO_Q3_6_SEL 15
+#define PINMUX_SHARED_IO_Q3_7_SEL 10
+#define PINMUX_SHARED_IO_Q3_8_SEL 10
+#define PINMUX_SHARED_IO_Q3_9_SEL 10
+#define PINMUX_SHARED_IO_Q4_10_SEL 12
+#define PINMUX_SHARED_IO_Q4_11_SEL 12
+#define PINMUX_SHARED_IO_Q4_12_SEL 12
+#define PINMUX_SHARED_IO_Q4_1_SEL 0
+#define PINMUX_SHARED_IO_Q4_2_SEL 0
+#define PINMUX_SHARED_IO_Q4_3_SEL 15
+#define PINMUX_SHARED_IO_Q4_4_SEL 12
+#define PINMUX_SHARED_IO_Q4_5_SEL 15
+#define PINMUX_SHARED_IO_Q4_6_SEL 15
+#define PINMUX_SHARED_IO_Q4_7_SEL 10
+#define PINMUX_SHARED_IO_Q4_8_SEL 15
+#define PINMUX_SHARED_IO_Q4_9_SEL 12
+#define PINMUX_SPIM0_USEFPGA_SEL 0
+#define PINMUX_SPIM1_USEFPGA_SEL 0
+#define PINMUX_SPIS0_USEFPGA_SEL 0
+#define PINMUX_SPIS1_USEFPGA_SEL 0
+#define PINMUX_UART0_USEFPGA_SEL 0
+#define PINMUX_UART1_USEFPGA_SEL 0
+#define PINMUX_USB0_USEFPGA_SEL 0
+#define PINMUX_USB1_USEFPGA_SEL 0
+
+/* Bridge Configuration */
+#define F2H_AXI_SLAVE 1
+#define F2SDRAM0_AXI_SLAVE 1
+#define F2SDRAM1_AXI_SLAVE 0
+#define F2SDRAM2_AXI_SLAVE 1
+#define H2F_AXI_MASTER 1
+#define LWH2F_AXI_MASTER 1
+
+/* Voltage Select for Config IO */
+#define CONFIG_IO_BANK_VSEL \
+	(((CONFIG_IO_BANK_VOLTAGE_SEL_CLKRST_IO & 0x3) << 8) | \
+	(CONFIG_IO_BANK_VOLTAGE_SEL_PERI_IO & 0x3))
+
+/* Macro for Config IO bit mapping */
+#define CONFIG_IO_MACRO(NAME) (((NAME ## _RTRIM & 0xff) << 19) | \
+	((NAME ## _INPUT_BUF_EN & 0x3) << 17) | \
+	((NAME ## _WK_PU_EN & 0x1) << 16) | \
+	((NAME ## _PU_SLW_RT & 0x1) << 13) | \
+	((NAME ## _PU_DRV_STRG & 0xf) << 8) | \
+	((NAME ## _PD_SLW_RT & 0x1) << 5) | \
+	(NAME ## _PD_DRV_STRG & 0x1f))
+
+#endif /* __SOCFPGA_ARRIA10_CONFIG_H__ */
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria5.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria5.dtsi
new file mode 100644
index 000000000..22dbf07af
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria5.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: dwmmc0@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria5_secu1.dts b/roms/u-boot/arch/arm/dts/socfpga_arria5_secu1.dts
new file mode 100644
index 000000000..cfe3e67df
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria5_secu1.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016-2020 Hitachi Power Grids
+ */
+
+#include "socfpga_arria5.dtsi"
+#include "socfpga-common-u-boot.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hitachi PG SoC SECU1 Board";
+	compatible = "altr,socfpga-secu1", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x20000000>; /* 512MB */
+	};
+
+	aliases {
+		/*
+		 * this allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac0 device tree blob.
+		 */
+		ethernet0 = &gmac0;
+		spi0 = &spi1;
+	};
+
+	bootcount@0 {
+		compatible = "u-boot,bootcount-rtc";
+		rtc = <&rtc>;
+		offset = <0x9e>;
+	};
+
+	i2c_gpio: i2c@0 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&portc 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)	/* SDA */
+			 &portc 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;	/* SCL */
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		i2c-gpio,deblock;
+
+		temp_sensor@48 {
+			compatible = "national,lm75";
+			reg = <0x48>;
+		};
+
+		eeprom@50 {
+			compatible = "at,24c08";
+			reg = <0x50>;
+		};
+
+		rtc: rtc@68 {
+			compatible = "st,m41st87";
+			reg = <0x68>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 42 0x4>;
+		};
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	bus-width = <4>;
+	u-boot,dm-pre-reloc;
+};
+
+&nand0 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&watchdog0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi
new file mode 100644
index 000000000..dfaff4c0f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+#include "socfpga-common-u-boot.dtsi"
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb1;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	compatible = "n25q00", "jedec,spi-nor";
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_arria5_socdk.dts b/roms/u-boot/arch/arm/dts/socfpga_arria5_socdk.dts
new file mode 100644
index 000000000..fa972e287
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_arria5_socdk.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_arria5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria V SoC Development Kit";
+	compatible = "altr,socfpga-arria5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&porta 0 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 11 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&porta 17 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&porta 18 1>;
+		};
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <1560>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <1200>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5.dtsi b/roms/u-boot/arch/arm/dts/socfpga_cyclone5.dtsi
new file mode 100644
index 000000000..319a71e41
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: dwmmc0@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts
new file mode 100644
index 000000000..6439daa52
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include "socfpga-common-u-boot.dtsi"
+
+/ {
+	model = "Devboards.de DBM-SoC1";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+		udc0 = &usb1;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&mmc0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&usb1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&watchdog0 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi
new file mode 100644
index 000000000..0219c6948
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright Altera Corporation (C) 2015
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+#include "socfpga-common-u-boot.dtsi"
+
+/{
+	aliases {
+		udc0 = &usb1;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de0_nano_soc.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de0_nano_soc.dts
new file mode 100644
index 000000000..67076e1b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic DE-0(Atlas)";
+	compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 24 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+
+	max-frame-size = <3800>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	adxl345: adxl345@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de10_nano.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de10_nano.dts
new file mode 100644
index 000000000..4be408394
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de10_nano.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, Intel Corporation
+ *
+ * based on socfpga_cyclone5_de0_nano_soc.dts
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include "socfpga-common-u-boot.dtsi"
+
+/ {
+	model = "Terasic DE10-Nano";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+		udc0 = &usb1;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <420>;
+	rxd1-skew-ps = <420>;
+	rxd2-skew-ps = <420>;
+	rxd3-skew-ps = <420>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <1860>;
+	rxdv-skew-ps = <420>;
+	rxc-skew-ps = <1680>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&mmc0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&watchdog0 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de1_soc.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de1_soc.dts
new file mode 100644
index 000000000..ff1e61e0c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_de1_soc.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright Altera Corporation (C) 2015
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include "socfpga-common-u-boot.dtsi"
+
+/ {
+	model = "Terasic DE1-SoC";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+		udc0 = &usb1;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <420>;
+	rxd1-skew-ps = <420>;
+	rxd2-skew-ps = <420>;
+	rxd3-skew-ps = <420>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <1860>;
+	rxdv-skew-ps = <420>;
+	rxc-skew-ps = <1680>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&mmc0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&watchdog0 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_is1.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_is1.dts
new file mode 100644
index 000000000..a76949879
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_is1.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include "socfpga-common-u-boot.dtsi"
+
+/ {
+	model = "SoCFPGA Cyclone V IS1";
+	compatible = "anonymous,socfpga-is1", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+		udc0 = &usb1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <1560>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <1200>;
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
+&qspi {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	flash0: n25q00@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00", "jedec,spi-nor";
+		reg = <0>;      /* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		page-size = <256>;
+		block-size = <16>; /* 2^16, 64KB */
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&watchdog0 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcv.dtsi b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 000000000..bd92806ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Aries/DENX MCV";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GiB */
+	};
+};
+
+&mmc0 {	/* On-SoM eMMC */
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcvevk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcvevk-u-boot.dtsi
new file mode 100644
index 000000000..eea453b8a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcvevk-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2019 Wolfgang Grandegger <wg@aries-embedded.de>
+ */
+
+#include "socfpga-common-u-boot.dtsi"
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcvevk.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 000000000..ceaec2977
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+	model = "Aries/DENX MCV EVK";
+	compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		stmpe-i2c0 = &stmpe1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {	/* GPIO  0 ... 28 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 29 ... 57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	stmpe1: stmpe811@41 {
+		compatible = "st,stmpe811";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-gpio = <&portb 28 0x4>;     /* GPIO 57, trig. level HI */
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			ts,sample-time = <4>;
+			ts,mod-12b = <1>;
+			ts,ref-sel = <0>;
+			ts,adc-freq = <1>;
+			ts,ave-ctrl = <1>;
+			ts,touch-det-delay = <3>;
+			ts,settling = <4>;
+			ts,fraction-z = <7>;
+			ts,i-drive = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi
new file mode 100644
index 000000000..d24f621cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+#include "socfpga-common-u-boot.dtsi"
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb1;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&flash0 {
+	compatible = "n25q00", "jedec,spi-nor";
+	u-boot,dm-pre-reloc;
+
+	partition@qspi-boot {
+		/* 8MB for raw data. */
+		label = "Flash 0 Raw Data";
+		reg = <0x0 0x800000>;
+	};
+
+	partition@qspi-rootfs {
+		/* 120MB for jffs2 data. */
+		label = "Flash 0 jffs2 Filesystem";
+		reg = <0x800000 0x7800000>;
+	};
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&i2c0 {
+	i2c-scl-falling-time-ns = <300>;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socdk.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socdk.dts
new file mode 100644
index 000000000..95c7619b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 15 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 14 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 13 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&portb 12 1>;
+		};
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <1560>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <1200>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: n25q00@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00";
+		reg = <0>;	/* chip select */
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi
new file mode 100644
index 000000000..85cc396a7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+#include "socfpga-common-u-boot.dtsi"
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb1;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	compatible = "n25q00", "jedec,spi-nor";
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sockit.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sockit.dts
new file mode 100644
index 000000000..90669cde4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sockit.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic SoCkit";
+	compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:blue:led0";
+			gpios = <&portb 24 0>;	/* HPS_GPIO53 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led1 {
+			label = "hps:blue:led1";
+			gpios = <&portb 25 0>;	/* HPS_GPIO54 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led2 {
+			label = "hps:blue:led2";
+			gpios = <&portb 26 0>;	/* HPS_GPIO55 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led3 {
+			label = "hps:blue:led3";
+			gpios = <&portb 27 0>;	/* HPS_GPIO56 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_sw0 {
+			label = "hps_sw0";
+			gpios = <&portc 20 0>;	/* HPS_GPI7 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x0>;	/* SW_LID */
+		};
+
+		hps_sw1 {
+			label = "hps_sw1";
+			gpios = <&portc 19 0>;	/* HPS_GPI6 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x5>;	/* SW_DOCK */
+		};
+
+		hps_sw2 {
+			label = "hps_sw2";
+			gpios = <&portc 18 0>;	/* HPS_GPI5 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xa>;	/* SW_KEYPAD_SLIDE */
+		};
+
+		hps_sw3 {
+			label = "hps_sw3";
+			gpios = <&portc 17 0>;	/* HPS_GPI4 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xc>;	/* SW_ROTATE_LOCK */
+		};
+
+		hps_hkey0 {
+			label = "hps_hkey0";
+			gpios = <&portc 21 1>;	/* HPS_GPI8 */
+			linux,code = <187>;	/* KEY_F17 */
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";
+			gpios = <&portc 22 1>;	/* HPS_GPI9 */
+			linux,code = <188>;	/* KEY_F18 */
+		};
+
+		hps_hkey2 {
+			label = "hps_hkey2";
+			gpios = <&portc 23 1>;	/* HPS_GPI10 */
+			linux,code = <189>;	/* KEY_F19 */
+		};
+
+		hps_hkey3 {
+			label = "hps_hkey3";
+			gpios = <&portc 24 1>;	/* HPS_GPI11 */
+			linux,code = <190>;	/* KEY_F20 */
+		};
+	};
+
+	regulator_3_3v: vcc3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <1560>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <1200>;
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi
new file mode 100644
index 000000000..0a4d54e30
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+#include "socfpga-common-u-boot.dtsi"
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb1;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	compatible = "n25q256a", "jedec,spi-nor";
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts
new file mode 100644
index 000000000..8d5d3996f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "EBV SOCrates";
+	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	leds: gpio-leds {
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t82";
+		reg = <0x68>;
+	};
+};
+
+&leds {
+	compatible = "gpio-leds";
+
+	led0 {
+		label = "led:green:heartbeat";
+		gpios = <&porta 28 1>;
+		linux,default-trigger = "heartbeat";
+	};
+
+	led1 {
+		label = "led:green:D7";
+		gpios = <&portb 19 1>;
+	};
+
+	led2 {
+		label = "led:green:D8";
+		gpios = <&portb 25 1>;
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sr1500.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sr1500.dts
new file mode 100644
index 000000000..bb29da6d6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_sr1500.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include "socfpga-common-u-boot.dtsi"
+
+/ {
+	model = "SoCFPGA Cyclone V SR1500";
+	compatible = "anonymous,socfpga-sr1500", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		/*
+		 * This allows the ethaddr uboot environment variable
+		 * contents to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&i2c0 {
+	status = "okay";
+	speed-mode = <0>;
+};
+
+&i2c1 {
+	status = "okay";
+	speed-mode = <0>;
+};
+
+&mmc0 {
+	status = "okay";
+	bus-width = <8>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	flash0: n25q00@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00", "jedec,spi-nor";
+		reg = <0>;      /* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		page-size = <256>;
+		block-size = <16>; /* 2^16, 64KB */
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi
new file mode 100644
index 000000000..2e4468e8d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+#include "socfpga-common-u-boot.dtsi"
+
+/{
+	aliases {
+		spi0 = "/soc/spi@ff705000";
+		udc0 = &usb0;
+	};
+};
+
+&watchdog0 {
+	status = "disabled";
+};
+
+&mmc {
+	status = "disabled";
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+
+	n25q128@0 {
+		compatible = "n25q128", "jedec,spi-nor";
+		u-boot,dm-pre-reloc;
+	};
+	n25q00@1 {
+		compatible = "n25q00", "jedec,spi-nor";
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	clock-frequency = <100000000>;
+};
+
+&porta {
+	bank-name = "porta";
+};
+
+&portb {
+	bank-name = "portb";
+};
+
+&portc {
+	bank-name = "portc";
+};
+
+&watchdog0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts
new file mode 100644
index 000000000..3fb6e1437
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2015-2019 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Softing VIN|ING FPGA";
+	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/*
+		 * This allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+		ethernet1 = &gmac0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_temp0 {
+			label = "BTN_0";			/* TEMP_OS */
+			gpios = <&portc 18 GPIO_ACTIVE_LOW>;	/* HPS_GPIO60 */
+			linux,code = <BTN_0>;
+		};
+
+		hps_hkey0 {
+			label = "BTN_1";			/* DIS_PWR */
+			gpios = <&portc 19 GPIO_ACTIVE_LOW>;	/* HPS_GPIO61 */
+			linux,code = <BTN_1>;
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";			/* POWER_DOWN */
+			gpios = <&portc 20 GPIO_ACTIVE_LOW>;	/* HPS_GPIO62 */
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	regulator-usb-nrst {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_nrst";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+	phy-mode = "gmii";
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+
+	snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <10000 10000 10000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <1860>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio: pca9557@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+
+	i2cswitch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@6 {	/* Backplane EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {	/* Power board EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	n25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128";
+		reg = <0>;		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+
+	n25q00@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00";
+		reg = <1>;		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_soc64_fit-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_soc64_fit-u-boot.dtsi
new file mode 100644
index 000000000..84b91e8df
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_soc64_fit-u-boot.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ */
+
+#if defined(CONFIG_FIT)
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+};
+
+&binman {
+	u-boot {
+		filename = "u-boot.itb";
+		fit {
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+			description = "FIT with firmware and bootloader";
+			#address-cells = <1>;
+
+			images {
+				uboot {
+					description = "U-Boot SoC64";
+					type = "standalone";
+					os = "U-Boot";
+					arch = "arm64";
+					compression = "none";
+					load = <0x00200000>;
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+					hash {
+						algo = "crc32";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					os = "arm-trusted-firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x00001000>;
+					entry = <0x00001000>;
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+					hash {
+						algo = "crc32";
+					};
+				};
+
+				fdt {
+					description = "U-Boot SoC64 flat device-tree";
+					type = "flat_dt";
+					compression = "none";
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+					hash {
+						algo = "crc32";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+				conf {
+					description = "Intel SoC64 FPGA";
+					firmware = "atf";
+					loadables = "uboot";
+					fdt = "fdt";
+					signature {
+						algo = "crc32";
+						key-name-hint = "dev";
+						sign-images = "atf", "fdt", "uboot";
+					};
+				};
+			};
+		};
+	};
+
+	kernel {
+		filename = "kernel.itb";
+		fit {
+			description = "FIT with Linux kernel image and FDT blob";
+			#address-cells = <1>;
+
+			images {
+				kernel {
+					description = "Linux Kernel";
+					type = "kernel";
+					arch = "arm64";
+					os = "linux";
+					compression = "none";
+					load = <0x4080000>;
+					entry = <0x4080000>;
+					kernel_blob: blob-ext {
+						filename = "Image";
+					};
+					hash {
+						algo = "crc32";
+					};
+				};
+
+				fdt {
+					description = "Linux DTB";
+					type = "flat_dt";
+					arch = "arm64";
+					compression = "none";
+					kernel_fdt_blob: blob-ext {
+						filename = "linux.dtb";
+					};
+					hash {
+						algo = "crc32";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+				conf {
+					description = "Intel SoC64 FPGA";
+					kernel = "kernel";
+					fdt = "fdt";
+					signature {
+						algo = "crc32";
+						key-name-hint = "dev";
+						sign-images = "fdt", "kernel";
+					};
+				};
+			};
+		};
+	};
+};
+
+#if defined(CONFIG_SOCFPGA_SECURE_VAB_AUTH)
+&uboot_blob {
+	filename = "signed-u-boot-nodtb.bin";
+};
+
+&atf_blob {
+	filename = "signed-bl31.bin";
+};
+
+&uboot_fdt_blob {
+	filename = "signed-u-boot.dtb";
+};
+
+&kernel_blob {
+	filename = "signed-Image";
+};
+
+&kernel_fdt_blob {
+	filename = "signed-linux.dtb";
+};
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/dts/socfpga_stratix10-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_stratix10-u-boot.dtsi
new file mode 100644
index 000000000..3e3a37804
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_stratix10-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ */
+
+#include "socfpga_soc64_fit-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/socfpga_stratix10.dtsi b/roms/u-boot/arch/arm/dts/socfpga_stratix10.dtsi
new file mode 100755
index 000000000..7a7777202
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_stratix10.dtsi
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Intel Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "altr,socfpga-stratix10";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 120 8>,
+			     <0 121 8>,
+			     <0 122 8>,
+			     <0 123 8>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	intc: intc@fffc1000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0xfffc1000 0x0 0x1000>,
+		      <0x0 0xfffc2000 0x0 0x2000>,
+		      <0x0 0xfffc4000 0x0 0x2000>,
+		      <0x0 0xfffc6000 0x0 0x2000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges = <0 0 0 0xffffffff>;
+		u-boot,dm-pre-reloc;
+
+		clkmgr: clkmgr@ffd10000 {
+			compatible = "altr,clk-mgr";
+			reg = <0xffd10000 0x1000>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 90 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth";
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff802000 0x2000>;
+			interrupts = <0 91 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth";
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 92 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth";
+			altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc03200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03200 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 110 4>;
+				bank-name = "porta";
+			};
+		};
+
+		gpio1: gpio@ffc03300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03300 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 111 4>;
+				bank-name = "portb";
+			};
+		};
+
+		i2c0: i2c@ffc02800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02800 0x100>;
+			interrupts = <0 103 4>;
+			resets = <&rst I2C0_RESET>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02900 0x100>;
+			interrupts = <0 104 4>;
+			resets = <&rst I2C1_RESET>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02a00 0x100>;
+			interrupts = <0 105 4>;
+			resets = <&rst I2C2_RESET>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02b00 0x100>;
+			interrupts = <0 106 4>;
+			resets = <&rst I2C3_RESET>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02c00 0x100>;
+			interrupts = <0 107 4>;
+			resets = <&rst I2C4_RESET>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		mmc: dwmmc0@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 96 4>;
+			fifo-depth = <0x400>;
+			resets = <&rst SDMMC_RESET>, <&rst SDMMC_OCP_RESET>;
+			u-boot,dm-pre-reloc;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x100000>;
+		};
+
+		qspi: spi@ff8d2000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <0 3 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			status = "disabled";
+		};
+
+		rst: rstmgr@ffd11000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd11000 0x1000>;
+			altr,modrst-offset = <0x20>;
+			u-boot,dm-pre-reloc;
+		};
+
+		sdr: sdr@f8000400 {
+			 compatible = "altr,sdr-ctl-s10";
+			 reg = <0xf8000400 0x80>,
+			       <0xf8010000 0x190>,
+			       <0xf8011000 0x500>;
+			 resets = <&rst DDRSCH_RESET>;
+			 u-boot,dm-pre-reloc;
+		 };
+
+		spi0: spi@ffda4000 {
+			compatible = "intel,stratix10-spi",
+				     "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x1000>;
+			interrupts = <0 99 4>;
+			resets = <&rst SPIM0_RESET>;
+			reg-io-width = <4>;
+			num-chipselect = <4>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "intel,stratix10-spi",
+				     "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x1000>;
+			interrupts = <0 100 4>;
+			resets = <&rst SPIM1_RESET>;
+			reg-io-width = <4>;
+			num-chipselect = <4>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd12000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd12000 0x1000>;
+		};
+
+		/* Local timer */
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
+		};
+
+		timer0: timer0@ffc03000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 113 4>;
+			reg = <0xffc03000 0x100>;
+		};
+
+		timer1: timer1@ffc03100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 114 4>;
+			reg = <0xffc03100 0x100>;
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 4>;
+			reg = <0xffd00000 0x100>;
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 4>;
+			reg = <0xffd00100 0x100>;
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 108 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			clock-frequency = <100000000>;
+			u-boot,dm-pre-reloc;
+			status = "disabled";
+		};
+
+		uart1: serial1@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 109 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			status = "disabled";
+		};
+
+		usbphy0: usbphy@0 {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0x40000>;
+			interrupts = <0 93 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0x40000>;
+			interrupts = <0 94 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 117 4>;
+			resets = <&rst WATCHDOG0_RESET>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 118 4>;
+			resets = <&rst WATCHDOG1_RESET>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@ffd00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00400 0x100>;
+			interrupts = <0 125 4>;
+			resets = <&rst WATCHDOG2_RESET>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@ffd00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00500 0x100>;
+			interrupts = <0 126 4>;
+			resets = <&rst WATCHDOG3_RESET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi b/roms/u-boot/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi
new file mode 100755
index 000000000..61df425f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2019-2020 Intel Corporation <www.intel.com>
+ */
+
+#include "socfpga_stratix10-u-boot.dtsi"
+
+/{
+	aliases {
+		spi0 = &qspi;
+	};
+};
+
+&clkmgr {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&flash0 {
+	compatible = "jedec,spi-nor";
+	spi-max-frequency = <100000000>;
+	spi-tx-bus-width = <4>;
+	spi-rx-bus-width = <4>;
+	u-boot,dm-pre-reloc;
+};
+
+&sysmgr {
+	u-boot,dm-pre-reloc;
+};
+
+&watchdog0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/socfpga_stratix10_socdk.dts b/roms/u-boot/arch/arm/dts/socfpga_stratix10_socdk.dts
new file mode 100755
index 000000000..b7b48a5d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/socfpga_stratix10_socdk.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Intel Corporation
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+
+	aliases {
+		ethernet0 = &gmac0;
+		i2c0 = &i2c1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		device_type = "memory";
+		/* 4GB */
+		reg = <0 0x00000000 0 0x80000000>,
+		      <1 0x80000000 0 0x80000000>;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <3800>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	drvsel = <3>;
+	smplsel = <0>;
+};
+
+&qspi {
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00a";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x4000000>;
+			};
+
+			qspi_rootfs: partition@4000000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x4000000 0x4000000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/st-pincfg.h b/roms/u-boot/arch/arm/dts/st-pincfg.h
new file mode 100644
index 000000000..d80551202
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/st-pincfg.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ST_PINCFG_H_
+#define _ST_PINCFG_H_
+
+/* Alternate functions */
+#define ALT1	1
+#define ALT2	2
+#define ALT3	3
+#define ALT4	4
+#define ALT5	5
+#define ALT6	6
+#define ALT7	7
+
+/* Output enable */
+#define OE			(1 << 27)
+/* Pull Up */
+#define PU			(1 << 26)
+/* Open Drain */
+#define OD			(1 << 25)
+#define RT			(1 << 23)
+#define INVERTCLK		(1 << 22)
+#define CLKNOTDATA		(1 << 21)
+#define DOUBLE_EDGE		(1 << 20)
+#define CLK_A			(0 << 18)
+#define CLK_B			(1 << 18)
+#define CLK_C			(2 << 18)
+#define CLK_D			(3 << 18)
+
+/* User-frendly defines for Pin Direction */
+		/* oe = 0, pu = 0, od = 0 */
+#define IN			(0)
+		/* oe = 0, pu = 1, od = 0 */
+#define IN_PU			(PU)
+		/* oe = 1, pu = 0, od = 0 */
+#define OUT			(OE)
+		/* oe = 1, pu = 0, od = 1 */
+#define BIDIR			(OE | OD)
+		/* oe = 1, pu = 1, od = 1 */
+#define BIDIR_PU		(OE | PU | OD)
+
+/* RETIME_TYPE */
+/*
+ * B Mode
+ * Bypass retime with optional delay parameter
+ */
+#define BYPASS		(0)
+/*
+ * R0, R1, R0D, R1D modes
+ * single-edge data non inverted clock, retime data with clk
+ */
+#define SE_NICLK_IO	(RT)
+/*
+ * RIV0, RIV1, RIV0D, RIV1D modes
+ * single-edge data inverted clock, retime data with clk
+ */
+#define SE_ICLK_IO	(RT | INVERTCLK)
+/*
+ * R0E, R1E, R0ED, R1ED modes
+ * double-edge data, retime data with clk
+ */
+#define DE_IO		(RT | DOUBLE_EDGE)
+/*
+ * CIV0, CIV1 modes with inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define ICLK		(RT | CLKNOTDATA | INVERTCLK)
+/*
+ * CLK0, CLK1 modes with non-inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define NICLK		(RT | CLKNOTDATA)
+#endif /* _ST_PINCFG_H_ */
diff --git a/roms/u-boot/arch/arm/dts/ste-ab8500.dtsi b/roms/u-boot/arch/arm/dts/ste-ab8500.dtsi
new file mode 100644
index 000000000..14d4d8617
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ste-ab8500.dtsi
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/clock/ste-ab8500.h>
+
+/ {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			    <&gpadc 0x03>, /* Main charger voltage */
+			    <&gpadc 0x08>, /* Main battery voltage */
+			    <&gpadc 0x09>, /* VBUS */
+			    <&gpadc 0x0a>, /* Main charger current */
+			    <&gpadc 0x0b>, /* USB charger current */
+			    <&gpadc 0x0c>, /* Backup battery voltage */
+			    <&gpadc 0x0d>, /* Die temperature */
+			    <&gpadc 0x12>; /* Crystal temperature */
+	};
+
+	soc {
+		prcmu@80157000 {
+			ab8500 {
+				compatible = "stericsson,ab8500";
+				interrupt-parent = <&intc>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
+				ab8500_gpio: ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				gpadc: ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_tvout_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					main_charger_v: channel@03 {
+						reg = <0x03>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					main_charger_c: channel@0a {
+						reg = <0x0a>;
+					};
+					usb_charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					die_temp: channel@0d {
+						reg = <0x0d>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+					xtal_temp: channel@12 {
+						reg = <0x12>;
+					};
+					vbat_true_meas: channel@13 {
+						reg = <0x13>;
+					};
+					bat_ctrl_and_ibat: channel@1c {
+						reg = <0x1c>;
+					};
+					vbat_meas_and_ibat: channel@1d {
+						reg = <0x1d>;
+					};
+					vbat_true_meas_and_ibat: channel@1e {
+						reg = <0x1e>;
+					};
+					bat_temp_and_ibat: channel@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				ab8500_temp {
+					compatible = "stericsson,abx500-temp";
+					io-channels = <&gpadc 0x06>,
+						      <&gpadc 0x07>;
+					io-channel-name = "aux1", "aux2";
+				};
+
+				ab8500_battery: ab8500_battery {
+					stericsson,battery-type = "LIPO";
+					thermistor-on-batctrl;
+				};
+
+				ab8500_fg {
+					compatible = "stericsson,ab8500-fg";
+					battery	   = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
+				};
+
+				ab8500_btemp {
+					compatible = "stericsson,ab8500-btemp";
+					battery	   = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							"bat_ctrl";
+				};
+
+				ab8500_charger {
+					compatible	= "stericsson,ab8500-charger";
+					battery		= <&ab8500_battery>;
+					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+					io-channels = <&gpadc 0x03>,
+						      <&gpadc 0x0a>,
+						      <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "main_charger_v",
+							"main_charger_c",
+							"vbus_v",
+							"usb_charger_c";
+				};
+
+				ab8500_chargalg {
+					compatible	= "stericsson,ab8500-chargalg";
+					battery		= <&ab8500_battery>;
+				};
+
+				ab8500_usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+						       96 IRQ_TYPE_LEVEL_HIGH
+						       14 IRQ_TYPE_LEVEL_HIGH
+						       15 IRQ_TYPE_LEVEL_HIGH
+						       79 IRQ_TYPE_LEVEL_HIGH
+						       74 IRQ_TYPE_LEVEL_HIGH
+						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+					clocks = <&prcmu_clk PRCMU_SYSCLK>;
+					clock-names = "sysclk";
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ext_regulators: ab8500-ext-regulators {
+					compatible = "stericsson,ab8500-ext-regulator";
+
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext2_reg: ab8500_ext2 {
+						regulator-min-microvolt = <1360000>;
+						regulator-max-microvolt = <1360000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext3_reg: ab8500_ext3 {
+						regulator-min-microvolt = <3400000>;
+						regulator-max-microvolt = <3400000>;
+						regulator-boot-on;
+					};
+				};
+
+				ab8500-regulators {
+					compatible = "stericsson,ab8500-regulator";
+					vin-supply = <&ab8500_ext3_reg>;
+
+					// supplies to the display/camera
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+						/* BUG: If turned off MMC will be affected. */
+						regulator-always-on;
+					};
+
+					// supplies to the on-board eMMC
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for VAUX3; SDcard slots
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+					};
+
+					// supply for tvout; gpadc; TVOUT LDO
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+					};
+
+					// supply for v-anamic1 VAMIC1 LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+					};
+
+					// supply for v-dmic; VDMIC LDO
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+					};
+				};
+			};
+		};
+
+		sound {
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
+		mcde@a0350000 {
+			vana-supply = <&ab8500_ldo_ana_reg>;
+
+			dsi@a0351000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0352000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0353000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ste-ab8505.dtsi b/roms/u-boot/arch/arm/dts/ste-ab8505.dtsi
new file mode 100644
index 000000000..c72aa250b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ste-ab8505.dtsi
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/clock/ste-ab8500.h>
+
+/ {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			      <&gpadc 0x08>, /* Main battery voltage */
+			      <&gpadc 0x09>, /* VBUS */
+			      <&gpadc 0x0b>, /* Charger current */
+			      <&gpadc 0x0c>; /* Backup battery voltage */
+	};
+
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				compatible = "stericsson,ab8505";
+				interrupt-parent = <&intc>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
+				ab8505_gpio: ab8505-gpio {
+					compatible = "stericsson,ab8505-gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				gpadc: ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+				};
+
+				ab8500_battery: ab8500_battery {
+					status = "disabled";
+					thermistor-on-batctrl;
+				};
+
+				ab8500_fg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-fg";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
+				};
+
+				ab8500_btemp {
+					status = "disabled";
+					compatible = "stericsson,ab8500-btemp";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							  "bat_ctrl";
+				};
+
+				ab8500_charger {
+					status = "disabled";
+					compatible = "stericsson,ab8500-charger";
+					battery = <&ab8500_battery>;
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					io-channels = <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "vbus_v",
+							  "usb_charger_c";
+				};
+
+				ab8500_chargalg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-chargalg";
+					battery = <&ab8500_battery>;
+				};
+
+				ab8500_usb: ab8500_usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+						       96 IRQ_TYPE_LEVEL_HIGH
+						       14 IRQ_TYPE_LEVEL_HIGH
+						       15 IRQ_TYPE_LEVEL_HIGH
+						       79 IRQ_TYPE_LEVEL_HIGH
+						       74 IRQ_TYPE_LEVEL_HIGH
+						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+					clocks = <&prcmu_clk PRCMU_SYSCLK>;
+					clock-names = "sysclk";
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ab8505-regulators {
+					compatible = "stericsson,ab8505-regulator";
+
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4_reg: ab8500_ldo_aux4 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5_reg: ab8500_ldo_aux5 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					ab8500_ldo_aux6_reg: ab8500_ldo_aux6 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-min-microvolt = <1250000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					// supply for gpadc; ADC LDO
+					ab8500_ldo_adc_reg: ab8500_ldo_adc {
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+					};
+
+					// supply for v-anamic1 VAMIC1 LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+					};
+
+					// supply for v-aux8; VAUX8 LDO
+					ab8500_ldo_aux8_reg: ab8500_ldo_aux8 {
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+					};
+				};
+			};
+		};
+
+		sound {
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
+		mcde@a0350000 {
+			vana-supply = <&ab8500_ldo_ana_reg>;
+
+			dsi@a0351000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0352000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0353000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ste-dbx5x0-u-boot.dtsi b/roms/u-boot/arch/arm/dts/ste-dbx5x0-u-boot.dtsi
new file mode 100644
index 000000000..4a99ee5a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ste-dbx5x0-u-boot.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "skeleton.dtsi"
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	soc {
+		/* FIXME: Remove this when clk driver is implemented */
+		mtu@a03c6000 {
+			clock-frequency = <133000000>;
+		};
+		uart@80120000 {
+			clock = <38400000>;
+		};
+		uart@80121000 {
+			clock = <38400000>;
+		};
+		uart@80007000 {
+			clock = <38400000>;
+		};
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&prcmu>;
+		offset = <0x228>; /* PRCM_APE_SOFTRST */
+		mask = <0x1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ste-dbx5x0.dtsi b/roms/u-boot/arch/arm/dts/ste-dbx5x0.dtsi
new file mode 100644
index 000000000..6671f74c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ste-dbx5x0.dtsi
@@ -0,0 +1,1144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/dbx500-prcmu.h>
+#include <dt-bindings/arm/ux500_pm_domains.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* This stablilizes the device enumeration */
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "ste,dbx500-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x300>;
+			clocks = <&prcmu_clk PRCMU_ARMSS>;
+			clock-names = "cpu";
+			clock-latency = <20000>;
+			#cooling-cells = <2>;
+		};
+		CPU1: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x301>;
+		};
+	};
+
+	thermal-zones {
+		/*
+		 * Thermal zone for the SoC, using the thermal sensor in the
+		 * PRCMU for temperature and the cpufreq driver for passive
+		 * cooling.
+		 */
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			/*
+			 * This sensor fires interrupts to update the thermal
+			 * zone, so no polling is needed.
+			 */
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu-crit {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				trip = <&cpu_alert>;
+				cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <100>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "stericsson,db8500", "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		ptm@801ae000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801ae000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		ptm@801af000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801af000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		funnel@801a6000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x801a6000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			out-ports {
+				port {
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_in_port0: endpoint {
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_in_port1: endpoint {
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-static-replicator";
+			clocks = <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "atclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etb_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in_port0: endpoint {
+						remote-endpoint = <&funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		tpiu@80190000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x80190000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		etb@801a4000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0x801a4000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@a0411000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xa0411000 0x1000>,
+			      <0xa0410100 0x100>;
+		};
+
+		scu@a0410000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xa0410000 0x100>;
+		};
+
+		/*
+		 * The backup RAM is used for retention during sleep
+		 * and various things like spin tables
+		 */
+		backupram@80150000 {
+			compatible = "ste,dbx500-backupram";
+			reg = <0x80150000 0x2000>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0xa0412000 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pm_domains: pm_domains0 {
+			compatible = "stericsson,ux500-pm-domains";
+			#power-domain-cells = <1>;
+		};
+
+		clocks {
+			compatible = "stericsson,u8500-clks";
+			/*
+			 * Registers for the CLKRST block on peripheral
+			 * groups 1, 2, 3, 5, 6,
+			 */
+			reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+			    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+			    <0xa03cf000 0x1000>;
+
+			prcmu_clk: prcmu-clock {
+				#clock-cells = <1>;
+			};
+
+			prcc_pclk: prcc-periph-clock {
+				#clock-cells = <2>;
+			};
+
+			prcc_kclk: prcc-kernel-clock {
+				#clock-cells = <2>;
+			};
+
+			rtc_clk: rtc32k-clock {
+				#clock-cells = <0>;
+			};
+
+			smp_twd_clk: smp-twd-clock {
+				#clock-cells = <0>;
+			};
+		};
+
+		mtu@a03c6000 {
+			/* Nomadik System Timer */
+			compatible = "st,nomadik-mtu";
+			reg = <0xa03c6000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+			clock-names = "timclk", "apb_pclk";
+		};
+
+		timer@a0410600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xa0410600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+
+			clocks = <&smp_twd_clk>;
+		};
+
+		watchdog@a0410620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xa0410620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&smp_twd_clk>;
+		};
+
+		rtc@80154000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x80154000 0x1000>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&rtc_clk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio0: gpio@8012e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e000 0x80>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			clocks = <&prcc_pclk 1 9>;
+		};
+
+		gpio1: gpio@8012e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e080 0x80>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
+			gpio-ranges = <&pinctrl 0 32 5>;
+			clocks = <&prcc_pclk 1 9>;
+		};
+
+		gpio2: gpio@8000e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e000 0x80>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio3: gpio@8000e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e080 0x80>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
+			gpio-ranges = <&pinctrl 0 96 2>;
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio4: gpio@8000e100 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e100 0x80>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio5: gpio@8000e180 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e180 0x80>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
+			gpio-ranges = <&pinctrl 0 160 12>;
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio6: gpio@8011e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e000 0x80>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
+			gpio-ranges = <&pinctrl 0 192 32>;
+			clocks = <&prcc_pclk 2 11>;
+		};
+
+		gpio7: gpio@8011e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e080 0x80>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
+			gpio-ranges = <&pinctrl 0 224 7>;
+			clocks = <&prcc_pclk 2 11>;
+		};
+
+		gpio8: gpio@a03fe000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0xa03fe000 0x80>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
+			gpio-ranges = <&pinctrl 0 256 12>;
+			clocks = <&prcc_pclk 5 1>;
+		};
+
+		pinctrl: pinctrl {
+			compatible = "stericsson,db8500-pinctrl";
+			nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>,
+						<&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>,
+						<&gpio8>;
+			prcm = <&prcmu>;
+		};
+
+		usb_per5@a03e0000 {
+			compatible = "stericsson,db8500-musb";
+			reg = <0xa03e0000 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+
+			dr_mode = "otg";
+
+			dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+			       <&dma 38 0 0x0>, /* Logical - MemToDev */
+			       <&dma 37 0 0x2>, /* Logical - DevToMem */
+			       <&dma 37 0 0x0>, /* Logical - MemToDev */
+			       <&dma 36 0 0x2>, /* Logical - DevToMem */
+			       <&dma 36 0 0x0>, /* Logical - MemToDev */
+			       <&dma 19 0 0x2>, /* Logical - DevToMem */
+			       <&dma 19 0 0x0>, /* Logical - MemToDev */
+			       <&dma 18 0 0x2>, /* Logical - DevToMem */
+			       <&dma 18 0 0x0>, /* Logical - MemToDev */
+			       <&dma 17 0 0x2>, /* Logical - DevToMem */
+			       <&dma 17 0 0x0>, /* Logical - MemToDev */
+			       <&dma 16 0 0x2>, /* Logical - DevToMem */
+			       <&dma 16 0 0x0>, /* Logical - MemToDev */
+			       <&dma 39 0 0x2>, /* Logical - DevToMem */
+			       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+			dma-names = "iep_1_9",  "oep_1_9",
+				    "iep_2_10", "oep_2_10",
+				    "iep_3_11", "oep_3_11",
+				    "iep_4_12", "oep_4_12",
+				    "iep_5_13", "oep_5_13",
+				    "iep_6_14", "oep_6_14",
+				    "iep_7_15", "oep_7_15",
+				    "iep_8",    "oep_8";
+
+			clocks = <&prcc_pclk 5 0>;
+		};
+
+		dma: dma-controller@801C0000 {
+			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+			reg = <0x801C0000 0x1000 0x40010000 0x800>;
+			reg-names = "base", "lcpa";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <3>;
+			memcpy-channels = <56 57 58 59 60>;
+
+			clocks = <&prcmu_clk PRCMU_DMACLK>;
+		};
+
+		prcmu: prcmu@80157000 {
+			compatible = "stericsson,db8500-prcmu", "syscon";
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			prcmu-timer-4@80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
+
+			thermal: thermal@801573c0 {
+				compatible = "stericsson,db8500-thermal";
+				reg = <0x801573c0 0x40>;
+				interrupt-parent = <&prcmu>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+					     <22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
+				#thermal-sensor-cells = <0>;
+			};
+
+			db8500-prcmu-regulators {
+				compatible = "stericsson,db8500-prcmu-regulator";
+
+				// DB8500_REGULATOR_VAPE
+				db8500_vape_reg: db8500_vape {
+					regulator-always-on;
+				};
+
+				// DB8500_REGULATOR_VARM
+				db8500_varm_reg: db8500_varm {
+				};
+
+				// DB8500_REGULATOR_VMODEM
+				db8500_vmodem_reg: db8500_vmodem {
+				};
+
+				// DB8500_REGULATOR_VPLL
+				db8500_vpll_reg: db8500_vpll {
+				};
+
+				// DB8500_REGULATOR_VSMPS1
+				db8500_vsmps1_reg: db8500_vsmps1 {
+				};
+
+				// DB8500_REGULATOR_VSMPS2
+				db8500_vsmps2_reg: db8500_vsmps2 {
+				};
+
+				// DB8500_REGULATOR_VSMPS3
+				db8500_vsmps3_reg: db8500_vsmps3 {
+				};
+
+				// DB8500_REGULATOR_VRF1
+				db8500_vrf1_reg: db8500_vrf1 {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSP
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAPIPE
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSP
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAPIPE
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SGA
+				db8500_sga_reg: db8500_sga {
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12
+				db8500_esram12_reg: db8500_esram12 {
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12RET
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34
+				db8500_esram34_reg: db8500_esram34 {
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34RET
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+				};
+			};
+		};
+
+		i2c0: i2c@80004000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80004000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@80122000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80122000 0x1000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		i2c2: i2c@80128000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80128000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		i2c3: i2c@80110000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80110000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		i2c4: i2c@8012a000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x8012a000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		ssp0: spi@80002000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80002000 0x1000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+			       <&dma 8 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		ssp1: spi@80003000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80003000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+			       <&dma 9 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		spi0: spi@8011a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8011a000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+			       <&dma 0 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		spi1: spi@80112000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80112000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+			       <&dma 35 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		spi2: spi@80111000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80111000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+			       <&dma 33 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		spi3: spi@80129000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80129000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+			       <&dma 40 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		serial0: uart@80120000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80120000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+			       <&dma 13 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		serial1: uart@80121000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80121000 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
+			       <&dma 12 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		serial2: uart@80007000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80007000 0x1000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
+			       <&dma 11 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		sdi0_per1@80126000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80126000 0x1000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+			       <&dma 29 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi1_per2@80118000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80118000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
+			       <&dma 32 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi2_per3@80005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80005000 0x1000>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
+			       <&dma 28 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi3_per2@80119000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80119000 0x1000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
+			       <&dma 41 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi4_per2@80114000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80114000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
+			       <&dma 42 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi5_per3@80008000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80008000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
+			       <&dma 43 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+			stericsson,cpu-dai = <&msp1 &msp3>;
+		};
+
+		msp0: msp@80123000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80123000 0x1000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
+			       <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		msp1: msp@80124000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80124000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			/* This DMA channel only exist on DB8500 v1 */
+			dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
+			dma-names = "tx";
+
+			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		// HDMI sound
+		msp2: msp@80117000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80117000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			dmas = <&dma 14 0 0x12>, /* Logical  - DevToMem - HighPrio */
+			       <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
+                                                    HighPrio - Fixed */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		msp3: msp@80125000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80125000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			/* This DMA channel only exist on DB8500 v2 */
+			dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
+			dma-names = "rx";
+
+			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		external-bus@50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000000>;
+			status = "disabled";
+		};
+
+		gpu@a0300000 {
+			/*
+			 * This block is referred to as "Smart Graphics Adapter SGA500"
+			 * in documentation but is in practice a pretty straight-forward
+			 * MALI-400 GPU block.
+			 */
+			compatible = "stericsson,db8500-mali", "arm,mali-400";
+			reg = <0xa0300000 0x10000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "combined";
+			clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>;
+			clock-names = "bus", "core";
+			mali-supply = <&db8500_sga_reg>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		mcde@a0350000 {
+			compatible = "ste,mcde";
+			reg = <0xa0350000 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			epod-supply = <&db8500_b2r2_mcde_reg>;
+			clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
+				 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
+				 <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
+			clock-names = "mcde", "lcd", "hdmi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			dsi0: dsi@a0351000 {
+				compatible = "ste,mcde-dsi";
+				reg = <0xa0351000 0x1000>;
+				clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+				clock-names = "hs", "lp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+			dsi1: dsi@a0352000 {
+				compatible = "ste,mcde-dsi";
+				reg = <0xa0352000 0x1000>;
+				clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+				clock-names = "hs", "lp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+			dsi2: dsi@a0353000 {
+				compatible = "ste,mcde-dsi";
+				reg = <0xa0353000 0x1000>;
+				/* This DSI port only has the Low Power / Energy Save clock */
+				clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+				clock-names = "lp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cryp@a03cb000 {
+			compatible = "stericsson,ux500-cryp";
+			reg = <0xa03cb000 0x1000>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 1>;
+		};
+
+		hash@a03c2000 {
+			compatible = "stericsson,ux500-hash";
+			reg = <0xa03c2000 0x1000>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 2>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ste-ux500-samsung-stemmy.dts b/roms/u-boot/arch/arm/dts/ste-ux500-samsung-stemmy.dts
new file mode 100644
index 000000000..7e7f4c823
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ste-ux500-samsung-stemmy.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/dts-v1/;
+
+#include "ste-dbx5x0-u-boot.dtsi"
+#include "ste-ab8500.dtsi"
+
+/ {
+	compatible = "samsung,stemmy", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	soc {
+		/* Debugging console UART */
+		uart@80007000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stih407-clock.dtsi b/roms/u-boot/arch/arm/dts/stih407-clock.dtsi
new file mode 100644
index 000000000..1ab40db7c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stih407-clock.dtsi
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ */
+#include <dt-bindings/clock/stih407-clks.h>
+/ {
+	/*
+	 * Fixed 30MHz oscillator inputs to SoC
+	 */
+	clk_sysin: clk-sysin {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <30000000>;
+	};
+
+	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-clkgen-plla9";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+
+
+			/*
+			 * ARM Peripheral clock for timers
+			 */
+			arm_periph_clk: clk-m-a9-periphs {
+				#clock-cells = <0>;
+				compatible = "fixed-factor-clock";
+
+				clocks = <&clk_m_a9>;
+				clock-div = <2>;
+				clock-mult = <1>;
+			};
+		};
+
+		clockgen-a@90ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0";
+				clock-critical = <CLK_IC_LMI0>;
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs-pll";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
+		};
+
+		clk_s_c0: clockgen-c@9103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll1";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp";
+				clock-critical = <CLK_PROC_STFE>,
+						 <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+
+					clocks = <&clk_s_c0_flexgen 13>;
+
+					clock-output-names = "clk-m-a9-ext2f-div2";
+
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@9104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-audio", "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clockgen-d2@9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-video", "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stih407-family.dtsi b/roms/u-boot/arch/arm/dts/stih407-family.dtsi
new file mode 100644
index 000000000..7c36c3726
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stih407-family.dtsi
@@ -0,0 +1,1000 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ */
+#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/stih407-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gp0_reserved: rproc@45000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x45000000 0x00400000>;
+			no-map;
+		};
+
+		delta_reserved: rproc@44000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x44000000 0x01000000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+
+					 /* kHz     uV   */
+			operating-points = <1500000 0
+					    1200000 0
+					    800000  0
+					    500000  0>;
+
+			clocks = <&clk_m_a9>;
+			clock-names = "cpu";
+			clock-latency = <100000>;
+			cpu0-supply = <&pwm_regulator>;
+			st,syscfg = <&syscfg_core 0x8e0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+
+					 /* kHz     uV   */
+			operating-points = <1500000 0
+					    1200000 0
+					    800000  0
+					    500000  0>;
+		};
+	};
+
+	intc: interrupt-controller@8761000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+	};
+
+	scu@8760000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x08760000 0x1000>;
+	};
+
+	timer@8760200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x08760200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&arm_periph_clk>;
+	};
+
+	l2: cache-controller@8762000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x08762000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	arm-pmu {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pwm_regulator: pwm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 3 8448>;
+		regulator-name = "CPU_1V0_AVS";
+		regulator-min-microvolt = <784000>;
+		regulator-max-microvolt = <1299000>;
+		regulator-always-on;
+		max-duty-cycle = <255>;
+		status = "okay";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
+
+		restart: restart-controller@0 {
+			compatible = "st,stih407-restart";
+			reg = <0 0>;
+			st,syscfg = <&syscfg_sbc_reg>;
+			status = "okay";
+		};
+
+		powerdown: powerdown-controller@0 {
+			compatible = "st,stih407-powerdown";
+			reg = <0 0>;
+			#reset-cells = <1>;
+		};
+
+		softreset: softreset-controller@0 {
+			compatible = "st,stih407-softreset";
+			reg = <0 0>;
+			#reset-cells = <1>;
+		};
+
+		picophyreset: picophyreset-controller@0 {
+			compatible = "st,stih407-picophyreset";
+			reg = <0 0>;
+			#reset-cells = <1>;
+		};
+
+		syscfg_sbc: sbc-syscfg@9620000 {
+			compatible = "st,stih407-sbc-syscfg", "syscon";
+			reg = <0x9620000 0x1000>;
+		};
+
+		syscfg_front: front-syscfg@9280000 {
+			compatible = "st,stih407-front-syscfg", "syscon";
+			reg = <0x9280000 0x1000>;
+		};
+
+		syscfg_rear: rear-syscfg@9290000 {
+			compatible = "st,stih407-rear-syscfg", "syscon";
+			reg = <0x9290000 0x1000>;
+		};
+
+		syscfg_flash: flash-syscfg@92a0000 {
+			compatible = "st,stih407-flash-syscfg", "syscon";
+			reg = <0x92a0000 0x1000>;
+		};
+
+		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+			reg = <0x9600000 0x1000>;
+		};
+
+		syscfg_core: core-syscfg@92b0000 {
+			compatible = "st,stih407-core-syscfg", "syscon";
+			reg = <0x92b0000 0x1000>;
+
+			sti_sasg_codec: sti-sasg-codec {
+				compatible = "st,stih407-sas-codec";
+				#sound-dai-cells = <1>;
+				status = "disabled";
+				st,syscfg = <&syscfg_core>;
+			};
+		};
+
+		syscfg_lpm: lpm-syscfg@94b5100 {
+			compatible = "st,stih407-lpm-syscfg", "syscon";
+			reg = <0x94b5100 0x1000>;
+		};
+
+		irq-syscfg@0 {
+			compatible    = "st,stih407-irq-syscfg";
+			reg = <0 0>;
+			st,syscfg     = <&syscfg_core>;
+			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+					<ST_IRQ_SYSCFG_PMU_1>;
+			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+					<ST_IRQ_SYSCFG_DISABLED>;
+		};
+
+		/* Display */
+		vtg_main: sti-vtg-main@8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		vtg_aux: sti-vtg-aux@8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial@9830000 {
+			compatible = "st,asc";
+			reg = <0x9830000 0x2c>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			/* Pinctrl moved out to a per-board configuration */
+
+			status = "disabled";
+		};
+
+		serial@9831000 {
+			compatible = "st,asc";
+			reg = <0x9831000 0x2c>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial1>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		serial@9832000 {
+			compatible = "st,asc";
+			reg = <0x9832000 0x2c>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial2>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		/* SBC_ASC0 - UART10 */
+		sbc_serial0: serial@9530000 {
+			compatible = "st,asc";
+			reg = <0x9530000 0x2c>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial0>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		serial@9531000 {
+			compatible = "st,asc";
+			reg = <0x9531000 0x2c>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial1>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		i2c@9840000 {
+			compatible = "st,comms-ssc4-i2c";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x9840000 0x110>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9841000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9842000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9843000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9844000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9845000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9845000 0x110>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c5_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+
+		/* SSCs on SBC */
+		i2c@9540000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9541000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb2_picophy0: phy1@0 {
+			compatible = "st,stih407-usb2-phy";
+			reg = <0 0>;
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0x100 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY2_RESET>;
+			reset-names = "global", "port";
+		};
+
+		miphy28lp_phy: miphy28lp@0 {
+			compatible = "st,miphy28lp-phy";
+			st,syscfg = <&syscfg_core>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			reg = <0 0>;
+
+			phy_port0: port@9b22000 {
+				reg = <0x9b22000 0xff>,
+				      <0x9b09000 0xff>,
+				      <0x9b04000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x114 0x818 0xe0 0xec>;
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+			};
+
+			phy_port1: port@9b2a000 {
+				reg = <0x9b2a000 0xff>,
+				      <0x9b19000 0xff>,
+				      <0x9b14000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+			};
+
+			phy_port2: port@8f95000 {
+				reg = <0x8f95000 0xff>,
+				      <0x8f90000 0xff>;
+				reg-names = "pipew",
+					    "usb3-up";
+
+				st,syscfg = <0x11c 0x820>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+			};
+		};
+
+		spi@9840000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9840000 0x110>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-0 = <&pinctrl_spi0_default>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9841000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9842000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9843000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9844000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		/* SBC SSC */
+		spi@9540000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9541000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9542000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9542000 0x110>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi12_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mmc0: sdhci@9060000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+			reg-names = "mmc", "top-mmc-delay";
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mmc0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+			bus-width = <8>;
+		};
+
+		mmc1: sdhci@9080000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09080000 0x7ff>;
+			reg-names = "mmc";
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+			resets = <&softreset STIH407_MMC1_SOFTRESET>;
+			bus-width = <4>;
+		};
+
+		/* Watchdog and Real-Time Clock */
+		lpc@8787000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8787000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+			timeout-sec = <120>;
+			st,syscfg = <&syscfg_core>;
+			st,lpc-mode = <ST_LPC_MODE_WDT>;
+		};
+
+		lpc@8788000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8788000 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+			st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
+		};
+
+		sata0: sata@9b20000 {
+			compatible = "st,ahci";
+			reg = <0x9b20000 0x1000>;
+
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port0 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+				 <&softreset STIH407_SATA0_SOFTRESET>,
+				 <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			ports-implemented = <0x1>;
+
+			status = "disabled";
+		};
+
+		sata1: sata@9b28000 {
+			compatible = "st,ahci";
+			reg = <0x9b28000 0x1000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port1 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+				 <&softreset STIH407_SATA1_SOFTRESET>,
+				 <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn",
+				      "sw-rst",
+				      "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			ports-implemented = <0x1>;
+
+			status = "disabled";
+		};
+
+
+		st_dwc3: dwc3@8f94000 {
+			compatible	= "st,stih407-dwc3";
+			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names	= "reg-glue", "syscfg-reg";
+			st,syscfg	= <&syscfg_core>;
+			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
+					  <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names	= "powerdown", "softreset";
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_usb3>;
+			ranges;
+
+			status = "disabled";
+
+			dwc3: dwc3@9900000 {
+				compatible	= "snps,dwc3";
+				reg		= <0x09900000 0x100000>;
+				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode		= "host";
+				phy-names	= "usb2-phy", "usb3-phy";
+				phys		= <&usb2_picophy0>,
+						  <&phy_port2 PHY_TYPE_USB3>;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		/* COMMS PWM Module */
+		pwm0: pwm@9810000 {
+			compatible	= "st,sti-pwm";
+			#pwm-cells	= <2>;
+			reg		= <0x9810000 0x68>;
+			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <1>;
+
+			status		= "disabled";
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@9510000 {
+			compatible	= "st,sti-pwm";
+			#pwm-cells	= <2>;
+			reg		= <0x9510000 0x68>;
+			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm1_chan0_default
+					&pinctrl_pwm1_chan1_default
+					&pinctrl_pwm1_chan2_default
+					&pinctrl_pwm1_chan3_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <4>;
+
+			status		= "disabled";
+		};
+
+		rng10: rng@8a89000 {
+			compatible      = "st,rng";
+			reg		= <0x08a89000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		rng11: rng@8a8a000 {
+			compatible      = "st,rng";
+			reg		= <0x08a8a000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			device_type = "network";
+			status = "disabled";
+			compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			reg = <0x9630000 0x8000>, <0x80 0x4>;
+			reg-names = "stmmaceth", "sti-ethconf";
+
+			st,syscon = <&syscfg_sbc_reg 0x80>;
+			st,gmac_en;
+			resets = <&softreset STIH407_ETH1_SOFTRESET>;
+			reset-names = "stmmaceth";
+
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+
+			/* DMA Bus Mode */
+			snps,pbl = <8>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_rgmii1>;
+
+			clock-names = "stmmaceth", "sti-ethclk";
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
+		};
+
+		rng10: rng@8a89000 {
+			compatible      = "st,rng";
+			reg		= <0x08a89000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		rng11: rng@8a8a000 {
+			compatible      = "st,rng";
+			reg		= <0x08a8a000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		mailbox0: mailbox@8f00000  {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f00000 0x1000>;
+			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells	= <2>;
+			mbox-name	= "a9";
+			status		= "okay";
+		};
+
+		mailbox1: mailbox@8f01000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f01000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_gp_1";
+			status		= "okay";
+		};
+
+		mailbox2: mailbox@8f02000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f02000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_gp_0";
+			status		= "okay";
+		};
+
+		mailbox3: mailbox@8f03000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f03000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_audio_video";
+			status		= "okay";
+		};
+
+		st231_gp0: st231-gp0@0 {
+			compatible	= "st,st231-rproc";
+			reg		= <0 0>;
+			memory-region	= <&gp0_reserved>;
+			resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+			clock-frequency	= <600000000>;
+			st,syscfg	= <&syscfg_core 0x22c>;
+			#mbox-cells = <1>;
+			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+			mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
+		};
+
+		st231_delta: st231-delta@0 {
+			compatible	= "st,st231-rproc";
+			reg		= <0 0>;
+			memory-region	= <&delta_reserved>;
+			resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
+			clock-frequency	= <600000000>;
+			st,syscfg	= <&syscfg_core 0x224>;
+			#mbox-cells = <1>;
+			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+			mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+		};
+
+		/* fdma audio */
+		fdma0: dma-controller@8e20000 {
+			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+			reg = <0x8e20000 0x8000>,
+			      <0x8e30000 0x3000>,
+			      <0x8e37000 0x1000>,
+			      <0x8e38000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma app */
+		fdma1: dma-controller@8e40000 {
+			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
+			reg = <0x8e40000 0x8000>,
+			      <0x8e50000 0x3000>,
+			      <0x8e57000 0x1000>,
+			      <0x8e58000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+
+			status = "disabled";
+		};
+
+		/* fdma free running */
+		fdma2: dma-controller@8e60000 {
+			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
+			reg = <0x8e60000 0x8000>,
+			      <0x8e70000 0x3000>,
+			      <0x8e77000 0x1000>,
+			      <0x8e78000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			compatible = "st,stih407-uni-player-hdmi";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d80000 0x158>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 2 0 1>;
+			dma-names = "tx";
+
+			status		= "disabled";
+		};
+
+		sti_uni_player1: sti-uni-player@8d81000 {
+			compatible = "st,stih407-uni-player-pcm-out";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d81000 0x158>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 3 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			compatible = "st,stih407-uni-player-dac";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d82000 0x158>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 4 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			compatible = "st,stih407-uni-player-spdif";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d85000 0x158>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 7 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader0: sti-uni-reader@8d83000 {
+			compatible = "st,stih407-uni-reader-pcm_in";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d83000 0x158>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 5 0 1>;
+			dma-names = "rx";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader1: sti-uni-reader@8d84000 {
+			compatible = "st,stih407-uni-reader-hdmi";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d84000 0x158>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 6 0 1>;
+			dma-names = "rx";
+
+			status = "disabled";
+		};
+
+		delta0@0 {
+			compatible = "st,st-delta";
+			reg = <0 0>;
+			clock-names = "delta",
+				      "delta-st231",
+				      "delta-flash-promip";
+			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stih407-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stih407-pinctrl.dtsi
new file mode 100644
index 000000000..2cf335714
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stih407-pinctrl.dtsi
@@ -0,0 +1,1262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		/* 0-5: PIO_SBC */
+		gpio0 = &pio0;
+		gpio1 = &pio1;
+		gpio2 = &pio2;
+		gpio3 = &pio3;
+		gpio4 = &pio4;
+		gpio5 = &pio5;
+		/* 10-19: PIO_FRONT0 */
+		gpio6 = &pio10;
+		gpio7 = &pio11;
+		gpio8 = &pio12;
+		gpio9 = &pio13;
+		gpio10 = &pio14;
+		gpio11 = &pio15;
+		gpio12 = &pio16;
+		gpio13 = &pio17;
+		gpio14 = &pio18;
+		gpio15 = &pio19;
+		/* 20: PIO_FRONT1 */
+		gpio16 = &pio20;
+		/* 30-35: PIO_REAR */
+		gpio17 = &pio30;
+		gpio18 = &pio31;
+		gpio19 = &pio32;
+		gpio20 = &pio33;
+		gpio21 = &pio34;
+		gpio22 = &pio35;
+		/* 40-42: PIO_FLASH */
+		gpio23 = &pio40;
+		gpio24 = &pio41;
+		gpio25 = &pio42;
+	};
+
+	soc {
+		pin-controller-sbc@961f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-sbc-pinctrl";
+			st,syscfg = <&syscfg_sbc>;
+			reg = <0x0961f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09610000 0x6000>;
+
+			pio0: gpio@9610000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO0";
+			};
+			pio1: gpio@9611000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO1";
+			};
+			pio2: gpio@9612000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO2";
+			};
+			pio3: gpio@9613000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO3";
+			};
+			pio4: gpio@9614000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO4";
+			};
+
+			pio5: gpio@9615000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO5";
+				st,retime-pin-mask = <0x3f>;
+			};
+
+			cec0 {
+				pinctrl_cec0_default: cec0-default {
+					st,pins {
+						hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			rc {
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+
+				pinctrl_uhf: uhf0 {
+					st,pins {
+						ir = <&pio4 1 ALT2 IN>;
+					};
+				};
+
+				pinctrl_tx: tx0 {
+					st,pins {
+						tx = <&pio4 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_tx_od: tx_od0 {
+					st,pins {
+						tx_od = <&pio4 3 ALT2 OUT>;
+					};
+				};
+			};
+
+			/* SBC_ASC0 - UART10 */
+			sbc_serial0 {
+				pinctrl_sbc_serial0: sbc_serial0-0 {
+					st,pins {
+						tx = <&pio3 4 ALT1 OUT>;
+						rx = <&pio3 5 ALT1 IN>;
+					};
+				};
+			};
+			/* SBC_ASC1 - UART11 */
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1-0 {
+					st,pins {
+						tx = <&pio2 6 ALT3 OUT>;
+						rx = <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			i2c10 {
+				pinctrl_i2c10_default: i2c10-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c11 {
+				pinctrl_i2c11_default: i2c11-default {
+					st,pins {
+						sda = <&pio5 1 ALT1 BIDIR>;
+						scl = <&pio5 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio4 0 ALT6 IN>;
+						keyin1 = <&pio4 5 ALT4 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio4 6 ALT4 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			gmac1 {
+				/*
+				 * Almost all the boards based on STiH407 SoC have an embedded
+				 * switch where the mdio/mdc have been used for managing the SMI
+				 * iface via I2C. For this reason these lines can be allocated
+				 * by using dedicated configuration (in case of there will be a
+				 * standard PHY transceiver on-board).
+				 */
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+
+						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio: rgmii1-mdio {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1: rmii1-0 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk: rmii1_phyclk {
+					st,pins {
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+					st,pins {
+						phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+					};
+				};
+			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out = <&pio3 0 ALT1 OUT>;
+						pwm-capturein = <&pio3 2 ALT1 IN>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-capturein = <&pio4 3 ALT1 IN>;
+						pwm-out = <&pio4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out = <&pio4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out = <&pio4 7 ALT3 OUT>;
+					};
+				};
+			};
+
+			spi10 {
+				pinctrl_spi10_default: spi10-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 OUT>;
+						mrst = <&pio4 7 ALT1 IN>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi11 {
+				pinctrl_spi11_default: spi11-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 OUT>;
+						mrst = <&pio3 0 ALT2 IN>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi12 {
+				pinctrl_spi12_default: spi12-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 OUT>;
+						mrst = <&pio3 4 ALT2 IN>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front0@920f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0920f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09200000 0x10000>;
+
+			pio10: pio@9200000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO10";
+			};
+			pio11: pio@9201000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO11";
+			};
+			pio12: pio@9202000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO12";
+			};
+			pio13: pio@9203000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO13";
+			};
+			pio14: pio@9204000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO14";
+			};
+			pio15: pio@9205000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO15";
+			};
+			pio16: pio@9206000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x100>;
+				st,bank-name = "PIO16";
+			};
+			pio17: pio@9207000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x100>;
+				st,bank-name = "PIO17";
+			};
+			pio18: pio@9208000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x100>;
+				st,bank-name = "PIO18";
+			};
+			pio19: pio@9209000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x100>;
+				st,bank-name = "PIO19";
+			};
+
+			/* Comms */
+			serial0 {
+				pinctrl_serial0: serial0-0 {
+					st,pins {
+						tx =  <&pio17 0 ALT1 OUT>;
+						rx =  <&pio17 1 ALT1 IN>;
+					};
+				};
+				pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl {
+					st,pins {
+						tx =  <&pio17 0 ALT1 OUT>;
+						rx =  <&pio17 1 ALT1 IN>;
+						cts = <&pio17 2 ALT1 IN>;
+						rts = <&pio17 3 ALT1 OUT>;
+					};
+				};
+			};
+
+			serial1 {
+				pinctrl_serial1: serial1-0 {
+					st,pins {
+						tx = <&pio16 0 ALT1 OUT>;
+						rx = <&pio16 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx = <&pio15 0 ALT1 OUT>;
+						rx = <&pio15 1 ALT1 IN>;
+					};
+				};
+			};
+
+			mmc1 {
+				pinctrl_sd1: sd1-0 {
+					st,pins {
+						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+						sd_led = <&pio16 6 ALT6 OUT>;
+						sd_pwren = <&pio16 7 ALT6 OUT>;
+						sd_cd = <&pio19 0 ALT6 IN>;
+						sd_wp = <&pio19 1 ALT6 IN>;
+					};
+				};
+			};
+
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio10 6 ALT2 BIDIR>;
+						scl = <&pio10 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio11 1 ALT2 BIDIR>;
+						scl = <&pio11 0 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c2 {
+				pinctrl_i2c2_default: i2c2-default {
+					st,pins {
+						sda = <&pio15 6 ALT2 BIDIR>;
+						scl = <&pio15 5 ALT2 BIDIR>;
+					};
+				};
+
+				pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
+					st,pins {
+						sda = <&pio12 6 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c3 {
+				pinctrl_i2c3_default: i2c3-alt1-0 {
+					st,pins {
+						sda = <&pio18 6 ALT1 BIDIR>;
+						scl = <&pio18 5 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+					st,pins {
+						sda = <&pio17 7 ALT1 BIDIR>;
+						scl = <&pio17 6 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+					st,pins {
+						sda = <&pio13 6 ALT3 BIDIR>;
+						scl = <&pio13 5 ALT3 BIDIR>;
+					};
+				};
+			};
+
+			spi0 {
+				pinctrl_spi0_default: spi0-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 OUT>;
+						mrst = <&pio10 7 ALT2 IN>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 OUT>;
+						mrst = <&pio19 5 ALT1 IN>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi1 {
+				pinctrl_spi1_default: spi1-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 OUT>;
+						mrst = <&pio11 2 ALT2 IN>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 OUT>;
+						mrst = <&pio14 4 ALT1 IN>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi2 {
+				pinctrl_spi2_default: spi2-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 OUT>;
+						mrst = <&pio12 7 ALT2 IN>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 OUT>;
+						mrst = <&pio14 7 ALT1 IN>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 OUT>;
+						mrst = <&pio15 7 ALT2 IN>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi3 {
+				pinctrl_spi3_default: spi3-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 OUT>;
+						mrst = <&pio13 7 ALT3 IN>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 OUT>;
+						mrst = <&pio17 5 ALT1 IN>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 OUT>;
+						mrst = <&pio18 7 ALT1 IN>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			tsin0 {
+				pinctrl_tsin0_parallel: tsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin0_serial: tsin0_serial {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin1 {
+				pinctrl_tsin1_parallel: tsin1_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin1_serial: tsin1_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin2 {
+				pinctrl_tsin2_parallel: tsin2_parallel {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin2_serial: tsin2_serial {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin3 {
+				pinctrl_tsin3_serial: tsin3_serial {
+					st,pins {
+						DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin4 {
+				pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
+					st,pins {
+						DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin5 {
+				pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
+					st,pins {
+						DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout0 {
+				pinctrl_tsout0_parallel: tsout0_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsout0_serial: tsout0_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout1 {
+				pinctrl_tsout1_serial: tsout1_serial {
+					st,pins {
+						DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
+						VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			mtsin0 {
+				pinctrl_mtsin0_parallel: mtsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			systrace {
+				pinctrl_systrace_default: systrace-default {
+					st,pins {
+						trc_data0 = <&pio11 3 ALT5 OUT>;
+						trc_data1 = <&pio11 4 ALT5 OUT>;
+						trc_data2 = <&pio11 5 ALT5 OUT>;
+						trc_data3 = <&pio11 6 ALT5 OUT>;
+						trc_clk   = <&pio11 7 ALT5 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front1@921f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0921f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09210000 0x10000>;
+
+			pio20: pio@9210000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+
+			tsin4 {
+				pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+		};
+
+		pin-controller-rear@922f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-rear-pinctrl";
+			st,syscfg = <&syscfg_rear>;
+			reg = <0x0922f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09220000 0x6000>;
+
+			pio30: gpio@9220000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO30";
+			};
+			pio31: gpio@9221000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO31";
+			};
+			pio32: gpio@9222000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO32";
+			};
+			pio33: gpio@9223000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO33";
+			};
+			pio34: gpio@9224000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO34";
+			};
+			pio35: gpio@9225000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO35";
+				st,retime-pin-mask = <0x7f>;
+			};
+
+			i2c4 {
+				pinctrl_i2c4_default: i2c4-default {
+					st,pins {
+						sda = <&pio30 1 ALT1 BIDIR>;
+						scl = <&pio30 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c5 {
+				pinctrl_i2c5_default: i2c5-default {
+					st,pins {
+						sda = <&pio34 4 ALT1 BIDIR>;
+						scl = <&pio34 3 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb3 {
+				pinctrl_usb3: usb3-2 {
+					st,pins {
+						usb-oc-detect = <&pio35 4 ALT1 IN>;
+						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+						usb-vbus-valid = <&pio35 6 ALT1 IN>;
+					};
+				};
+			};
+
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-capturein = <&pio31 0 ALT1 IN>;
+						pwm-out = <&pio31 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi4 {
+				pinctrl_spi4_default: spi4-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 OUT>;
+						mrst = <&pio30 2 ALT1 IN>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 OUT>;
+						mrst = <&pio34 2 ALT3 IN>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+			};
+
+			i2s_out {
+				pinctrl_i2s_8ch_out: i2s_8ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+						data1 = <&pio34 0 ALT1 OUT>;
+						data2 = <&pio34 1 ALT1 OUT>;
+						data3 = <&pio34 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_i2s_2ch_out: i2s_2ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			i2s_in {
+				pinctrl_i2s_8ch_in: i2s_8ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+						data1 = <&pio33 0 ALT1 IN>;
+						data2 = <&pio33 1 ALT1 IN>;
+						data3 = <&pio33 2 ALT1 IN>;
+						data4 = <&pio33 3 ALT1 IN>;
+					};
+				};
+
+				pinctrl_i2s_2ch_in: i2s_2ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+					};
+				};
+			};
+
+			spdif_out {
+				pinctrl_spdif_out: spdif_out{
+					st,pins {
+						spdif_out = <&pio34 7 ALT1 OUT>;
+					};
+				};
+			};
+
+			serial3 {
+				pinctrl_serial3: serial3-0 {
+					st,pins {
+						tx = <&pio31 3 ALT1 OUT>;
+						rx = <&pio31 4 ALT1 IN>;
+					};
+				};
+			};
+		};
+
+		pin-controller-flash@923f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-flash-pinctrl";
+			st,syscfg = <&syscfg_flash>;
+			reg = <0x0923f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09230000 0x3000>;
+
+			pio40: gpio@9230000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x100>;
+				st,bank-name = "PIO40";
+			};
+			pio41: gpio@9231000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO41";
+			};
+			pio42: gpio@9232000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO42";
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0-0 {
+					st,pins {
+						emmc_clk = <&pio40 6 ALT1 BIDIR>;
+						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+					};
+				};
+				pinctrl_sd0: sd0-0 {
+					st,pins {
+						sd_clk = <&pio40 6 ALT1 BIDIR>;
+						sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+						sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+						sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+						sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+						sd_led = <&pio42 0 ALT2 OUT>;
+						sd_pwren = <&pio42 2 ALT2 OUT>;
+						sd_vsel = <&pio42 3 ALT2 OUT>;
+						sd_cd = <&pio42 4 ALT2 IN>;
+						sd_wp = <&pio42 5 ALT2 IN>;
+					};
+				};
+			};
+
+			fsm {
+				pinctrl_fsm: fsm {
+					st,pins {
+						spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+						spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+						spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+						spi-fsm-miso = <&pio40 3 ALT1 IN>;
+						spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+						spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			nand {
+				pinctrl_nand: nand {
+					st,pins {
+						nand_cs1 = <&pio40 6 ALT3 OUT>;
+						nand_cs0 = <&pio40 7 ALT3 OUT>;
+						nand_d0 = <&pio41 0 ALT3 BIDIR>;
+						nand_d1 = <&pio41 1 ALT3 BIDIR>;
+						nand_d2 = <&pio41 2 ALT3 BIDIR>;
+						nand_d3 = <&pio41 3 ALT3 BIDIR>;
+						nand_d4 = <&pio41 4 ALT3 BIDIR>;
+						nand_d5 = <&pio41 5 ALT3 BIDIR>;
+						nand_d6 = <&pio41 6 ALT3 BIDIR>;
+						nand_d7 = <&pio41 7 ALT3 BIDIR>;
+						nand_we = <&pio42 0 ALT3 OUT>;
+						nand_dqs = <&pio42 1 ALT3 OUT>;
+						nand_ale = <&pio42 2 ALT3 OUT>;
+						nand_cle = <&pio42 3 ALT3 OUT>;
+						nand_rnb = <&pio42 4 ALT3 IN>;
+						nand_oe = <&pio42 5 ALT3 OUT>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stih410-b2260-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stih410-b2260-u-boot.dtsi
new file mode 100644
index 000000000..3b080ac7a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stih410-b2260-u-boot.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ *
+ */
+
+/{
+	soc {
+		st_dwc3: dwc3@8f94000 {
+			dwc3: dwc3@9900000 {
+				dr_mode	= "peripheral";
+				phys = <&usb2_picophy0>;
+			};
+		};
+
+		ohci0: usb@9a03c00 {
+			compatible = "generic-ohci";
+		};
+
+		ehci0: usb@9a03e00 {
+			compatible = "generic-ehci";
+		};
+
+		ohci1: usb@9a83c00 {
+			compatible = "generic-ohci";
+		};
+
+		ehci1: usb@9a83e00 {
+			compatible = "generic-ehci";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stih410-b2260.dts b/roms/u-boot/arch/arm/dts/stih410-b2260.dts
new file mode 100644
index 000000000..8c4155b62
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stih410-b2260.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
+ * Author: Patrice Chotard <patrice.chotard@foss.st.com>
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STiH410 B2260";
+	compatible = "st,stih410-b2260", "st,stih410";
+
+	chosen {
+		bootargs = "clk_ignore_unused";
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		serial1 = &uart1;
+		ethernet0 = &ethernet0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user_green_1 {
+			label = "User_green_1";
+			gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		user_green_2 {
+			label = "User_green_2";
+			gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		user_green_3 {
+			label = "User_green_3";
+			gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		user_green_4 {
+			label = "User_green_4";
+			gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "STI-B2260";
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			/* DAC */
+			format = "i2s";
+			mclk-fs = <128>;
+			cpu {
+				sound-dai = <&sti_uni_player0>;
+			};
+
+			codec {
+				sound-dai = <&sti_hdmi>;
+			};
+		};
+	};
+
+	soc {
+		/* Low speed expansion connector */
+		uart0: serial@9830000 {
+			label = "LS-UART0";
+			pinctrl-names = "default", "no-hw-flowctrl";
+			pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
+			pinctrl-1 = <&pinctrl_serial0>;
+			rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
+			uart-has-rtscts;
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		uart1: serial@9831000 {
+			label = "LS-UART1";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		spi0: spi@9844000 {
+			label = "LS-SPI0";
+			cs-gpios = <&pio30 3 0>;
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c0: i2c@9840000 {
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c1: i2c@9841000 {
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c2: i2c@9842000 {
+			label = "HS-I2C2";
+			pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c3: i2c@9843000 {
+			label = "HS-I2C3";
+			pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
+			status = "okay";
+		};
+
+		mmc0: sdhci@9060000 {
+			pinctrl-0 = <&pinctrl_sd0>;
+			bus-width = <4>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		mmc1: sdhci@9080000 {
+			status = "okay";
+		};
+
+		pwm0: pwm@9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm@9510000 {
+			status = "okay";
+		};
+
+		usb2_picophy1: phy2@0 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3@0 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			phy-mode = "rgmii";
+			pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+
+			snps,phy-bus-name = "stmmac";
+			snps,phy-bus-id = <0>;
+			snps,phy-addr = <0>;
+			snps,reset-gpio = <&pio0 7 0>;
+			snps,reset-active-low;
+			snps,reset-delays-us = <0 10000 1000000>;
+
+			status = "okay";
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			status = "okay";
+		};
+		/* SSC11 to HDMI */
+		hdmiddc: i2c@9541000 {
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+			status = "okay";
+		};
+
+		miphy28lp_phy: miphy28lp@0 {
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		sata1: sata@9b28000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stih410-clock.dtsi b/roms/u-boot/arch/arm/dts/stih410-clock.dtsi
new file mode 100644
index 000000000..81a8c25d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stih410-clock.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ */
+#include <dt-bindings/clock/stih410-clks.h>
+/ {
+	/*
+	 * Fixed 30MHz oscillator inputs to SoC
+	 */
+	clk_sysin: clk-sysin {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <30000000>;
+		clock-output-names = "CLK_SYSIN";
+	};
+
+	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		compatible = "st,stih410-clk", "simple-bus";
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-clkgen-plla9";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+			/*
+			 * ARM Peripheral clock for timers
+			 */
+			arm_periph_clk: clk-m-a9-periphs {
+				#clock-cells = <0>;
+				compatible = "fixed-factor-clock";
+				clocks = <&clk_m_a9>;
+				clock-div = <2>;
+				clock-mult = <1>;
+			};
+		};
+
+		clockgen-a@90ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0",
+						     "clk-ic-lmi1";
+				clock-critical = <CLK_IC_LMI0>;
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs-pll";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
+		};
+
+		clk_s_c0: clockgen-c@9103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll1";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp",
+						     "clk-tx-icn-hades",
+						     "clk-rx-icn-hades",
+						     "clk-icn-reg-16",
+						     "clk-pp-hades",
+						     "clk-clust-hades",
+						     "clk-hwpe-hades",
+						     "clk-fc-hades";
+				clock-critical = <CLK_PROC_STFE>,
+						 <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+
+					clocks = <&clk_s_c0_flexgen 13>;
+
+					clock-output-names = "clk-m-a9-ext2f-div2";
+
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@9104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-audio", "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff",
+						     "clk-pcmr10-master",
+						     "clk-usb2-phy";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clockgen-d2@9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-video", "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stih410-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stih410-pinctrl.dtsi
new file mode 100644
index 000000000..e6eadd124
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stih410-pinctrl.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ */
+#include "st-pincfg.h"
+/ {
+
+	soc {
+		pin-controller-rear@922f080 {
+
+			usb0 {
+				pinctrl_usb0: usb2-0 {
+					st,pins {
+						usb-oc-detect = <&pio35 0 ALT1 IN>;
+						usb-pwr-enable = <&pio35 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			usb1 {
+				pinctrl_usb1: usb2-1 {
+					st,pins {
+						usb-oc-detect = <&pio35 2 ALT1 IN>;
+						usb-pwr-enable = <&pio35 3 ALT1 OUT>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stih410.dtsi b/roms/u-boot/arch/arm/dts/stih410.dtsi
new file mode 100644
index 000000000..6d847019c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stih410.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ */
+#include "stih410-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	aliases {
+		bdisp0 = &bdisp0;
+	};
+
+	soc {
+		usb2_picophy1: phy2@0 {
+			compatible = "st,stih407-usb2-phy";
+			reg = <0 0>;
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xf8 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY0_RESET>;
+			reset-names = "global", "port";
+
+			status = "disabled";
+		};
+
+		usb2_picophy2: phy3@0 {
+			compatible = "st,stih407-usb2-phy";
+			reg = <0 0>;
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xfc 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY1_RESET>;
+			reset-names = "global", "port";
+
+			status = "disabled";
+		};
+
+		ohci0: usb@9a03c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a03c00 0x100>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ehci0: usb@9a03e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a03e00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci1: usb@9a83c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a83c00 0x100>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ehci1: usb@9a83e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a83e00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		sti-display-subsystem@0 {
+			compatible = "st,sti-display-subsystem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0 0>;
+			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+			assigned-clock-parents = <0>,
+						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>;
+
+			assigned-clock-rates = <297000000>,
+					       <297000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
+
+			ranges;
+
+			sti-compositor@9d11000 {
+				compatible = "st,stih407-compositor";
+				reg = <0x9d11000 0x1000>;
+
+				clock-names = "compo_main",
+					      "compo_aux",
+					      "pix_main",
+					      "pix_aux",
+					      "pix_gdp1",
+					      "pix_gdp2",
+					      "pix_gdp3",
+					      "pix_gdp4",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				reset-names = "compo-main", "compo-aux";
+				resets = <&softreset STIH407_COMPO_SOFTRESET>,
+					 <&softreset STIH407_COMPO_SOFTRESET>;
+				st,vtg = <&vtg_main>, <&vtg_aux>;
+			};
+
+			sti-tvout@8d08000 {
+				compatible = "st,stih407-tvout";
+				reg = <0x8d08000 0x1000>;
+				reg-names = "tvout-reg";
+				reset-names = "tvout";
+				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+						  <&clk_s_d0_flexgen CLK_PCM_0>,
+						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+						  <&clk_s_d2_flexgen CLK_HDDAC>;
+
+				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+							 <&clk_tmdsout_hdmi>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d0_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>;
+			};
+
+			sti_hdmi: sti-hdmi@8d04000 {
+				compatible = "st,stih407-hdmi";
+				reg = <0x8d04000 0x1000>;
+				reg-names = "hdmi-reg";
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "irq";
+				clock-names = "pix",
+					      "tmds",
+					      "phy",
+					      "audio",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+					 <&clk_s_d0_flexgen CLK_PCM_0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
+				reset-names = "hdmi";
+				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+				ddc = <&hdmiddc>;
+			};
+
+			sti-hda@8d02000 {
+				compatible = "st,stih407-hda";
+				status = "disabled";
+				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+				reg-names = "hda-reg", "video-dacs-ctrl";
+				clock-names = "pix",
+					      "hddac",
+					      "main_parent",
+					      "aux_parent";
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+					 <&clk_s_d2_flexgen CLK_HDDAC>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+			};
+
+			sti-hqvdp@9c00000 {
+				compatible = "st,stih407-hqvdp";
+				reg = <0x9C00000 0x100000>;
+				clock-names = "hqvdp", "pix_main";
+				clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+				reset-names = "hqvdp";
+				resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
+				st,vtg = <&vtg_main>;
+			};
+		};
+
+		bdisp0:bdisp@9f10000 {
+			compatible = "st,stih407-bdisp";
+			reg = <0x9f10000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "bdisp";
+			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+		};
+
+		hva@8c85000 {
+			compatible = "st,st-hva";
+			reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+			reg-names = "hva_registers", "hva_esram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_hva";
+			clocks = <&clk_s_c0_flexgen CLK_HVA>;
+		};
+
+		thermal@91a0000 {
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		delta0@0 {
+			compatible = "st,st-delta";
+			clock-names = "delta",
+				      "delta-st231",
+				      "delta-flash-promip";
+			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+		};
+
+		sti-cec@94a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+			hdmi-phandle = <&sti_hdmi>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32429i-eval-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32429i-eval-u-boot.dtsi
new file mode 100644
index 000000000..09d9d9ab9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32429i-eval-u-boot.dtsi
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/memory/stm32-sdram.h>
+/{
+	clocks {
+		u-boot,dm-pre-reloc;
+	};
+
+	aliases {
+		/* Aliases for gpios so as to use sequence */
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+		pin-controller {
+			u-boot,dm-pre-reloc;
+		};
+
+		fmc: fmc@A0000000 {
+			compatible = "st,stm32-fmc";
+			reg = <0xA0000000 0x1000>;
+			clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>;
+			st,syscfg = <&syscfg>;
+			pinctrl-0 = <&fmc_pins_d32>;
+			pinctrl-names = "default";
+			st,mem_remap = <4>;
+			u-boot,dm-pre-reloc;
+
+			/*
+			 * Memory configuration from sdram
+			 * MICRON MT48LC4M32B2B5-7
+			 */
+			bank0: bank@0 {
+			       st,sdram-control = /bits/ 8 <NO_COL_9
+							    NO_ROW_12
+							    MWIDTH_32
+							    BANKS_4
+							    CAS_3
+							    SDCLK_2
+							    RD_BURST_EN
+							    RD_PIPE_DL_0>;
+			       st,sdram-timing = /bits/ 8 <TMRD_2
+							   TXSR_6
+							   TRAS_4
+							   TRC_6
+							   TWR_2
+							   TRP_2
+							   TRCD_2>;
+			       st,sdram-refcount = < 2812 >;
+		       };
+		};
+	};
+};
+
+&clk_hse {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_lse {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_i2s_ckin {
+	u-boot,dm-pre-reloc;
+};
+
+&pwrcfg {
+	u-boot,dm-pre-reloc;
+};
+
+&syscfg {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioa {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiob {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiod {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioe {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiof {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiog {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioh {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioi {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioj {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiok {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	usart1_pins_a: usart1-0	{
+		u-boot,dm-pre-reloc;
+		pins1 {
+			u-boot,dm-pre-reloc;
+		};
+		pins2 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	fmc_pins_d32: fmc_d32@0 {
+		u-boot,dm-pre-reloc;
+		pins
+		{
+			pinmux = <STM32_PINMUX('I',10, AF12)>, /* D31 */
+				 <STM32_PINMUX('I', 9, AF12)>, /* D30 */
+				 <STM32_PINMUX('I', 7, AF12)>, /* D29 */
+				 <STM32_PINMUX('I', 6, AF12)>, /* D28 */
+				 <STM32_PINMUX('I', 3, AF12)>, /* D27 */
+				 <STM32_PINMUX('I', 2, AF12)>, /* D26 */
+				 <STM32_PINMUX('I', 1, AF12)>, /* D25 */
+				 <STM32_PINMUX('I', 0, AF12)>, /* D24 */
+				 <STM32_PINMUX('H',15, AF12)>, /* D23 */
+				 <STM32_PINMUX('H',14, AF12)>, /* D22 */
+				 <STM32_PINMUX('H',13, AF12)>, /* D21 */
+				 <STM32_PINMUX('H',12, AF12)>, /* D20 */
+				 <STM32_PINMUX('H',11, AF12)>, /* D19 */
+				 <STM32_PINMUX('H',10, AF12)>, /* D18 */
+				 <STM32_PINMUX('H', 9, AF12)>, /* D17 */
+				 <STM32_PINMUX('H', 8, AF12)>, /* D16 */
+
+				 <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D09 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D08 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D07 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D06 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D05 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D04 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D03 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D02 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D01 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D00 */
+
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+				 <STM32_PINMUX('I', 4, AF12)>, /* NBL2 */
+				 <STM32_PINMUX('I', 5, AF12)>, /* NBL3 */
+
+				 <STM32_PINMUX('G', 5, AF12)>, /* A15-BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* A14-BA0 */
+				 <STM32_PINMUX('G', 3, AF12)>, /* A13 */
+				 <STM32_PINMUX('G', 2, AF12)>, /* A12 */
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A09 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A08 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A07 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A06 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A05 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A04 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A03 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A02 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A01 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A00 */
+
+				 <STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
+				 <STM32_PINMUX('H', 5, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('H', 2, AF12)>, /* SDCKE0 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
+			slew-rate = <2>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&timer5 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32429i-eval.dts b/roms/u-boot/arch/arm/dts/stm32429i-eval.dts
new file mode 100644
index 000000000..592b182c1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32429i-eval.dts
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015, STMicroelectronics - All Rights Reserved
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32429i-EVAL board";
+	compatible = "st,stm32429i-eval", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vref: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_panel: vdd-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpiog 6 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&gpiog 7 1>;
+		};
+		led-red {
+			gpios = <&gpiog 10 1>;
+		};
+		led-blue {
+			gpios = <&gpiog 12 1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 0>;
+		};
+		button@1 {
+			label = "Tamper";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
+	usbotg_hs_phy: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "ampire,am-480272h3tmqw-t01h";
+		power-supply = <&vdd_panel>;
+		status = "okay";
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc3_in8_pin>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vref>;
+	status = "okay";
+	adc3: adc@200 {
+		st,adc-channels = <8>;
+		status = "okay";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&dcmi {
+	status = "okay";
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov2640: camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xvclk";
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+			};
+		};
+	};
+
+	stmpe1600: stmpe1600@42 {
+		compatible = "st,stmpe1600";
+		reg = <0x42>;
+		interrupts = <8 3>;
+		interrupt-parent = <&gpioi>;
+		interrupt-controller;
+		wakeup-source;
+
+		stmpegpio: stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&iwdg {
+	status = "okay";
+	timeout-sec = <32>;
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-0	= <&ethernet_mii>;
+	pinctrl-names	= "default";
+	phy-mode	= "mii";
+	phy-handle	= <&phy1>;
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_pins_od>;
+	bus-width = <4>;
+	max-frequency = <12500000>;
+};
+
+&timers1 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32746g-eval-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32746g-eval-u-boot.dtsi
new file mode 100644
index 000000000..f2195a6c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32746g-eval-u-boot.dtsi
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <stm32f7-u-boot.dtsi>
+/{
+	chosen {
+		bootargs = "root=/dev/mmcblk0p1 rw rootwait";
+	};
+
+	aliases {
+		/* Aliases for gpios so as to use sequence */
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+		mmc0 = &sdio1;
+		spi0 = &qspi;
+	};
+
+	button1 {
+		compatible = "st,button1";
+		button-gpio = <&gpioc 13 0>;
+	};
+
+	led1 {
+		compatible = "st,led1";
+		led-gpio = <&gpiof 10 0>;
+	};
+};
+
+&fmc {
+	/*
+	 * Memory configuration from sdram datasheet IS42S32800G-6BLI
+	 */
+	bank1: bank@0 {
+		u-boot,dm-pre-reloc;
+		st,sdram-control = /bits/ 8 <NO_COL_9
+					     NO_ROW_12
+					     MWIDTH_32
+					     BANKS_4
+					     CAS_2
+					     SDCLK_3
+					     RD_BURST_EN
+					     RD_PIPE_DL_0>;
+		st,sdram-timing = /bits/ 8 <TMRD_1
+					    TXSR_1
+					    TRAS_1
+					    TRC_6
+					    TRP_2
+					    TWR_1
+					    TRCD_1>;
+		st,sdram-refcount = <1539>;
+	};
+};
+
+&mac {
+	phy-mode = "mii";
+};
+
+&pinctrl {
+	ethernet_mii: mii@0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, AF11)>, /*ETH_MII_CRS */
+				 <STM32_PINMUX('A', 1, AF11)>, /*ETH_MII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>, /*ETH_MII_RX_DV */
+				 <STM32_PINMUX('A', 8, AF0)>, /*ETH_MII_MCO1 */
+				 <STM32_PINMUX('G',13, AF11)>, /*ETH_MII_TXD0 */
+				 <STM32_PINMUX('G',14, AF11)>, /*ETH_MII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /*ETH_MII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /*ETH_MII_TXD3 */
+				 <STM32_PINMUX('C', 3, AF11)>, /*ETH_MII_TX_CLK */
+				 <STM32_PINMUX('C', 4, AF11)>, /*ETH_MII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /*ETH_MII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /*ETH_MII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /*ETH_MII_RXD3 */
+				 <STM32_PINMUX('G',11, AF11)>, /*ETH_MII_TX_EN */
+				 <STM32_PINMUX('C', 1, AF11)>, /*ETH_MII_MDC */
+				 <STM32_PINMUX('A', 2, AF11)>; /*ETH_MII_MDIO */
+			slew-rate = <2>;
+		};
+	};
+
+	fmc_pins: fmc@0 {
+		pins {
+			pinmux = <STM32_PINMUX('I',10, AF12)>, /* D31 */
+				 <STM32_PINMUX('I', 9, AF12)>, /* D30 */
+				 <STM32_PINMUX('I', 7, AF12)>, /* D29 */
+				 <STM32_PINMUX('I', 6, AF12)>, /* D28 */
+				 <STM32_PINMUX('I', 3, AF12)>, /* D27 */
+				 <STM32_PINMUX('I', 2, AF12)>, /* D26 */
+				 <STM32_PINMUX('I', 1, AF12)>, /* D25 */
+				 <STM32_PINMUX('I', 0, AF12)>, /* D24 */
+				 <STM32_PINMUX('H',15, AF12)>, /* D23 */
+				 <STM32_PINMUX('H',14, AF12)>, /* D22 */
+				 <STM32_PINMUX('H',13, AF12)>, /* D21 */
+				 <STM32_PINMUX('H',12, AF12)>, /* D20 */
+				 <STM32_PINMUX('H',11, AF12)>, /* D19 */
+				 <STM32_PINMUX('H',10, AF12)>, /* D18 */
+				 <STM32_PINMUX('H', 9, AF12)>, /* D17 */
+				 <STM32_PINMUX('H', 8, AF12)>, /* D16 */
+
+				 <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D9 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D8 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D7 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D6 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D5 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D4 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D3 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D2 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D1 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D0 */
+
+				 <STM32_PINMUX('I', 5, AF12)>, /* NBL3 */
+				 <STM32_PINMUX('I', 4, AF12)>, /* NBL2 */
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
+
+				 <STM32_PINMUX('G', 5, AF12)>, /* BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* BA0 */
+
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A9 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A8 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A7 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A6 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A5 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A4 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A3 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A2 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A1 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A0 */
+
+				 <STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
+				 <STM32_PINMUX('H', 5, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('C', 3, AF12)>, /* SDCKE0 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
+			slew-rate = <2>;
+		};
+	};
+
+	qspi_pins: qspi@0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 2, AF9)>, /* _FUNC_QUADSPI_CLK */
+				 <STM32_PINMUX('B', 6, AF10)>, /*_FUNC_QUADSPI_BK1_NCS */
+				 <STM32_PINMUX('F', 8, AF10)>, /* _FUNC_QUADSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* _FUNC_QUADSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 6, AF9)>, /* AF_FUNC_QUADSPI_BK1_IO3 */
+				 <STM32_PINMUX('F', 7, AF9)>; /* _FUNC_QUADSPI_BK1_IO2 */
+			slew-rate = <2>;
+		};
+	};
+
+	usart1_pins_a: usart1-0	{
+		u-boot,dm-pre-reloc;
+		pins1 {
+			u-boot,dm-pre-reloc;
+		};
+		pins2 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&qspi {
+	reg = <0xA0001000 0x1000>, <0x90000000 0x4000000>;
+	qflash0: n25q512a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <108000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32746g-eval.dts b/roms/u-boot/arch/arm/dts/stm32746g-eval.dts
new file mode 100644
index 000000000..9940cf187
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32746g-eval.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include "stm32f746-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "STMicroelectronics STM32746g-EVAL board";
+	compatible = "st,stm32746g-eval", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpiof 10 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&stmfx_pinctrl 17 1>;
+		};
+		led-red {
+			gpios = <&gpiob 7 1>;
+		};
+		led-blue {
+			gpios = <&stmfx_pinctrl 19 1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
+	joystick {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&joystick_pins>;
+		pinctrl-names = "default";
+		button-0 {
+			label = "JoySel";
+			linux,code = <KEY_ENTER>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+		button-1 {
+			label = "JoyDown";
+			linux,code = <KEY_DOWN>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+		button-2 {
+			label = "JoyLeft";
+			linux,code = <KEY_LEFT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		};
+		button-3 {
+			label = "JoyRight";
+			linux,code = <KEY_RIGHT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		};
+		button-4 {
+			label = "JoyUp";
+			linux,code = <KEY_UP>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	stmfx: stmfx@42 {
+		compatible = "st,stmfx-0300";
+		reg = <0x42>;
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gpioi>;
+
+		stmfx_pinctrl: pinctrl {
+			compatible = "st,stmfx-0300-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+			joystick_pins: joystick {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+				drive-push-pull;
+				bias-pull-up;
+			};
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio1 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	broken-cd;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_a>;
+	pinctrl-1 = <&sdio_pins_od_a>;
+	bus-width = <4>;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "otg";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f4-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32f4-pinctrl.dtsi
new file mode 100644
index 000000000..adf502694
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f4-pinctrl.dtsi
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			usart3_pins_a: usart3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
+					bias-disable;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg-fs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_b: usbotg-fs-1 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
+						 <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
+						 <STM32_PINMUX('B', 15, AF12)>; /* OTG_HS_DP */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg-hs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
+						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			ethernet_mii: mii-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
+						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
+						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_MII_TXD2 */
+						 <STM32_PINMUX('B', 8, AF11)>, /* ETH_MII_TXD3 */
+						 <STM32_PINMUX('C', 3, AF11)>, /* ETH_MII_TX_CLK */
+						 <STM32_PINMUX('G', 11,AF11)>, /* ETH_MII_TX_EN_ETH_RMII_TX_EN */
+						 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+						 <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
+						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */
+						 <STM32_PINMUX('A', 7, AF11)>, /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */
+						 <STM32_PINMUX('C', 4, AF11)>, /* ETH_MII_RXD0_ETH_RMII_RXD0 */
+						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_MII_RXD1_ETH_RMII_RXD1 */
+						 <STM32_PINMUX('H', 6, AF11)>, /* ETH_MII_RXD2 */
+						 <STM32_PINMUX('H', 7, AF11)>; /* ETH_MII_RXD3 */
+					slew-rate = <2>;
+				};
+			};
+
+			adc3_in8_pin: adc-200 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
+				};
+			};
+
+			pwm1_pins: pwm1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
+						 <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
+						 <STM32_PINMUX('B', 12, AF1)>; /* TIM1_BKIN */
+				};
+			};
+
+			pwm3_pins: pwm3-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
+						 <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
+				};
+			};
+
+			i2c1_pins: i2c1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
+						 <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
+			ltdc_pins_a: ltdc-0 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+						 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+						 <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+						 <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+						 <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+						 <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+						 <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+						 <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6*/
+						 <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+						 <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+						 <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+						 <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+						 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+						 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+						 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+						 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+						 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+						 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3*/
+						 <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+						 <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+						 <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+						 <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
+						 <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+						 <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+						 <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+						 <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+
+			ltdc_pins_b: ltdc-1 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 6,  AF14)>,
+						/* LCD_HSYNC */
+						 <STM32_PINMUX('A', 4,  AF14)>,
+						 /* LCD_VSYNC */
+						 <STM32_PINMUX('G', 7,  AF14)>,
+						 /* LCD_CLK */
+						 <STM32_PINMUX('C', 10, AF14)>,
+						 /* LCD_R2 */
+						 <STM32_PINMUX('B', 0,  AF9)>,
+						 /* LCD_R3 */
+						 <STM32_PINMUX('A', 11, AF14)>,
+						 /* LCD_R4 */
+						 <STM32_PINMUX('A', 12, AF14)>,
+						 /* LCD_R5 */
+						 <STM32_PINMUX('B', 1,  AF9)>,
+						 /* LCD_R6*/
+						 <STM32_PINMUX('G', 6,  AF14)>,
+						 /* LCD_R7 */
+						 <STM32_PINMUX('A', 6,  AF14)>,
+						 /* LCD_G2 */
+						 <STM32_PINMUX('G', 10, AF9)>,
+						 /* LCD_G3 */
+						 <STM32_PINMUX('B', 10, AF14)>,
+						 /* LCD_G4 */
+						 <STM32_PINMUX('D', 6,  AF14)>,
+						 /* LCD_B2 */
+						 <STM32_PINMUX('G', 11, AF14)>,
+						 /* LCD_B3*/
+						 <STM32_PINMUX('B', 11, AF14)>,
+						 /* LCD_G5 */
+						 <STM32_PINMUX('C', 7,  AF14)>,
+						 /* LCD_G6 */
+						 <STM32_PINMUX('D', 3,  AF14)>,
+						 /* LCD_G7 */
+						 <STM32_PINMUX('G', 12, AF9)>,
+						 /* LCD_B4 */
+						 <STM32_PINMUX('A', 3,  AF14)>,
+						 /* LCD_B5 */
+						 <STM32_PINMUX('B', 8,  AF14)>,
+						 /* LCD_B6 */
+						 <STM32_PINMUX('B', 9,  AF14)>,
+						 /* LCD_B7 */
+						 <STM32_PINMUX('F', 10, AF14)>;
+						 /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+
+			spi5_pins: spi5-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 7, AF5)>,
+						/* SPI5_CLK */
+						 <STM32_PINMUX('F', 9, AF5)>;
+						/* SPI5_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('F', 8, AF5)>;
+						/* SPI5_MISO */
+					bias-disable;
+				};
+			};
+
+			i2c3_pins: i2c3-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 9, AF4)>,
+						/* I2C3_SDA */
+						 <STM32_PINMUX('A', 8, AF4)>;
+						/* I2C3_SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
+			dcmi_pins: dcmi-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
+						 <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
+						 <STM32_PINMUX('A', 6, AF13)>, /* DCMI_PIXCLK */
+						 <STM32_PINMUX('C', 6, AF13)>, /* DCMI_D0 */
+						 <STM32_PINMUX('C', 7, AF13)>, /* DCMI_D1 */
+						 <STM32_PINMUX('C', 8, AF13)>, /* DCMI_D2 */
+						 <STM32_PINMUX('C', 9, AF13)>, /* DCMI_D3 */
+						 <STM32_PINMUX('C', 11, AF13)>, /*DCMI_D4 */
+						 <STM32_PINMUX('D', 3, AF13)>, /* DCMI_D5 */
+						 <STM32_PINMUX('B', 8, AF13)>, /* DCMI_D6 */
+						 <STM32_PINMUX('E', 6, AF13)>, /* DCMI_D7 */
+						 <STM32_PINMUX('C', 10, AF13)>, /* DCMI_D8 */
+						 <STM32_PINMUX('C', 12, AF13)>, /* DCMI_D9 */
+						 <STM32_PINMUX('D', 6, AF13)>, /* DCMI_D10 */
+						 <STM32_PINMUX('D', 2, AF13)>; /* DCMI_D11 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
+
+			sdio_pins: sdio-pins-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od: sdio-pins-od-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f429-disco-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32f429-disco-u-boot.dtsi
new file mode 100644
index 000000000..297cc5614
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f429-disco-u-boot.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/memory/stm32-sdram.h>
+/{
+	clocks {
+		u-boot,dm-pre-reloc;
+	};
+
+	aliases {
+		/* Aliases for gpios so as to use sequence */
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+		pin-controller {
+			u-boot,dm-pre-reloc;
+		};
+
+		fmc: fmc@A0000000 {
+			compatible = "st,stm32-fmc";
+			reg = <0xA0000000 0x1000>;
+			clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>;
+			pinctrl-0 = <&fmc_pins>;
+			pinctrl-names = "default";
+			st,syscfg = <&syscfg>;
+			st,swp_fmc = <1>;
+			u-boot,dm-pre-reloc;
+
+			/*
+			 * Memory configuration from sdram datasheet
+			 * IS42S16400J
+			 */
+			bank1: bank@1 {
+			       st,sdram-control = /bits/ 8 <NO_COL_8
+							    NO_ROW_12
+							    MWIDTH_16
+							    BANKS_4
+							    CAS_3
+							    SDCLK_2
+							    RD_BURST_EN
+							    RD_PIPE_DL_0>;
+			       st,sdram-timing = /bits/ 8 <TMRD_3
+							   TXSR_7
+							   TRAS_4
+							   TRC_6
+							   TWR_2
+							   TRP_2 TRCD_2>;
+			       st,sdram-refcount = < 1386 >;
+		       };
+		};
+	};
+};
+
+&clk_hse {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_i2s_ckin {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_lse {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioa {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiob {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiod {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioe {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiof {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiog {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioh {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioi {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioj {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiok {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	usart1_pins_a: usart1-0	{
+		u-boot,dm-pre-reloc;
+		pins1 {
+			u-boot,dm-pre-reloc;
+		};
+		pins2 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	fmc_pins: fmc@0 {
+		u-boot,dm-pre-reloc;
+		pins
+		{
+			pinmux = <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D09 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D08 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D07 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D06 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D05 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D04 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D03 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D02 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D01 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D00 */
+
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+
+				 <STM32_PINMUX('G', 5, AF12)>, /* BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* BA0 */
+
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A09 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A08 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A07 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A06 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A05 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A04 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A03 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A02 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A01 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A00 */
+
+				 <STM32_PINMUX('B', 6, AF12)>, /* SDNE1 */
+				 <STM32_PINMUX('C', 0, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('B', 5, AF12)>, /* SDCKE1 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK */
+			slew-rate = <2>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&pwrcfg {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	u-boot,dm-pre-reloc;
+};
+
+&timer5 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f429-disco.dts b/roms/u-boot/arch/arm/dts/stm32f429-disco.dts
new file mode 100644
index 000000000..42477c8d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f429-disco.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32F429i-DISCO board";
+	compatible = "st,stm32f429i-disco", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-red {
+			gpios = <&gpiog 14 0>;
+		};
+		led-green {
+			gpios = <&gpiog 13 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioa 0 0>;
+		};
+	};
+
+	/* This turns on vbus for otg for host mode (dwc2) */
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpioc 4 0>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <8000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioa>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins_b>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&rtc {
+	assigned-clocks = <&rcc 1 CLK_RTC>;
+	assigned-clock-parents = <&rcc 1 CLK_LSI>;
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+	pinctrl-0 = <&spi5_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>, <&gpioc 2 GPIO_ACTIVE_LOW>;
+
+	l3gd20: l3gd20@0 {
+		compatible = "st,l3gd20-gyro";
+		spi-max-frequency = <10000000>;
+		st,drdy-int-pin = <2>;
+		interrupt-parent = <&gpioa>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>,
+				<2 IRQ_TYPE_EDGE_RISING>;
+		reg = <0>;
+		status = "okay";
+	};
+
+	display: display@1{
+		/* Connect panel-ilitek-9341 to ltdc */
+		compatible = "st,sf-tc240t-9370-t";
+		reg = <1>;
+		spi-3wire;
+		spi-max-frequency = <10000000>;
+		dc-gpios = <&gpiod 13 0>;
+		port {
+			panel_in_rgb: endpoint {
+			remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	compatible = "st,stm32f4x9-fsotg";
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_fs_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f429-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32f429-pinctrl.dtsi
new file mode 100644
index 000000000..575c7eeca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f429-pinctrl.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f429-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f429.dtsi b/roms/u-boot/arch/arm/dts/stm32f429.dtsi
new file mode 100644
index 000000000..a81e91606
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f429.dtsi
@@ -0,0 +1,773 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_lsi: clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_i2s_ckin: i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+	};
+
+	soc {
+		romem: efuse@1fff7800 {
+			compatible = "st,stm32f4-otp";
+			reg = <0x1fff7800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_cal1: calib@22c {
+				reg = <0x22c 0x2>;
+			};
+			ts_cal2: calib@22e {
+				reg = <0x22e 0x2>;
+			};
+		};
+
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
+			status = "disabled";
+		};
+
+		timers2: timers@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+		};
+
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
+			status = "disabled";
+		};
+
+		timers3: timers@40000400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000400 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
+			status = "disabled";
+		};
+
+		timers4: timers@40000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000800 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+		};
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
+		};
+
+		timers5: timers@40000c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000C00 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
+			status = "disabled";
+		};
+
+		timers6: timers@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
+			status = "disabled";
+		};
+
+		timers7: timers@40001400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001400 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		timers12: timers@40001800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001800 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timers@40001c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001C00 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers14: timers@40002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		rtc: rtc@40002800 {
+			compatible = "st,stm32-rtc";
+			reg = <0x40002800 0x400>;
+			clocks = <&rcc 1 CLK_RTC>;
+			assigned-clocks = <&rcc 1 CLK_RTC>;
+			assigned-clock-parents = <&rcc 1 CLK_LSE>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 1>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
+			status = "disabled";
+		};
+
+		iwdg: watchdog@40003000 {
+			compatible = "st,stm32-iwdg";
+			reg = <0x40003000 0x400>;
+			clocks = <&clk_lsi>;
+			clock-names = "lsi";
+			status = "disabled";
+		};
+
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI2)>;
+			status = "disabled";
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI3)>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
+			status = "disabled";
+			dmas = <&dma1 1 4 0x400 0x0>,
+			       <&dma1 3 4 0x400 0x0>;
+			dma-names = "rx", "tx";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40005400 {
+			compatible = "st,stm32f4-i2c";
+			reg = <0x40005400 0x400>;
+			interrupts = <31>,
+				     <32>;
+			resets = <&rcc STM32F4_APB1_RESET(I2C1)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40005c00 {
+			compatible = "st,stm32f4-i2c";
+			reg = <0x40005c00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32F4_APB1_RESET(I2C3)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dac: dac@40007400 {
+			compatible = "st,stm32f4-dac-core";
+			reg = <0x40007400 0x400>;
+			resets = <&rcc STM32F4_APB1_RESET(DAC)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(DAC)>;
+			clock-names = "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dac1: dac@1 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				status = "disabled";
+			};
+
+			dac2: dac@2 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
+			status = "disabled";
+		};
+
+		timers1: timers@40010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+		};
+
+		timers8: timers@40010400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010400 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
+			status = "disabled";
+			dmas = <&dma2 2 4 0x400 0x0>,
+			       <&dma2 7 4 0x400 0x0>;
+			dma-names = "rx", "tx";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
+			status = "disabled";
+		};
+
+		adc: adc@40012000 {
+			compatible = "st,stm32f4-adc-core";
+			reg = <0x40012000 0x400>;
+			interrupts = <18>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
+			clock-names = "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				dmas = <&dma2 0 0 0x400 0x0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				dmas = <&dma2 3 1 0x400 0x0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc3: adc@200 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x200>;
+				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>;
+				interrupt-parent = <&adc>;
+				interrupts = <2>;
+				dmas = <&dma2 1 2 0x400 0x0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		sdio: sdio@40012c00 {
+			compatible = "arm,pl180", "arm,primecell";
+			arm,primecell-periphid = <0x00880180>;
+			reg = <0x40012c00 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>;
+			clock-names = "apb_pclk";
+			interrupts = <49>;
+			max-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI1)>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI4)>;
+			status = "disabled";
+		};
+
+		syscfg: syscon@40013800 {
+			compatible = "st,stm32-syscfg", "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
+		timers9: timers@40014000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@8 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <8>;
+				status = "disabled";
+			};
+		};
+
+		timers10: timers@40014400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014400 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers11: timers@40014800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014800 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+			dmas = <&dma2 3 2 0x400 0x0>,
+				<&dma2 4 2 0x400 0x0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi6: spi@40015400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40015400 0x400>;
+			interrupts = <86>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI6)>;
+			status = "disabled";
+		};
+
+		pwrcfg: power-config@40007000 {
+			compatible = "st,stm32-power-config", "syscon";
+			reg = <0x40007000 0x400>;
+		};
+
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+			status = "disabled";
+		};
+
+		crc: crc@40023000 {
+			compatible = "st,stm32f4-crc";
+			reg = <0x40023000 0x400>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>;
+			status = "disabled";
+		};
+
+		rcc: rcc@40023810 {
+			#reset-cells = <1>;
+			#clock-cells = <2>;
+			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
+			st,syscfg = <&pwrcfg>;
+			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+			assigned-clock-rates = <1000000>;
+		};
+
+		dma1: dma-controller@40026000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>;
+			#dma-cells = <4>;
+		};
+
+		dma2: dma-controller@40026400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>;
+			#dma-cells = <4>;
+			st,mem2mem;
+		};
+
+		mac: ethernet@40028000 {
+			compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+			reg = <0x40028000 0x8000>;
+			reg-names = "stmmaceth";
+			interrupts = <61>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>,
+					<&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>,
+					<&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>;
+			st,syscon = <&syscfg 0x4>;
+			snps,pbl = <8>;
+			snps,mixed-burst;
+			status = "disabled";
+		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "snps,dwc2";
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		usbotg_fs: usb@50000000 {
+			compatible = "st,stm32f4x9-fsotg";
+			reg = <0x50000000 0x40000>;
+			interrupts = <67>;
+			clocks = <&rcc 0 39>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		dcmi: dcmi@50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F4_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		rng: rng@50060800 {
+			compatible = "st,stm32-rng";
+			reg = <0x50060800 0x400>;
+			clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
+
+		};
+	};
+};
+
+&systick {
+	clocks = <&rcc 1 SYSTICK>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f469-disco-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32f469-disco-u-boot.dtsi
new file mode 100644
index 000000000..9eda8f535
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f469-disco-u-boot.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/memory/stm32-sdram.h>
+/{
+	clocks {
+		u-boot,dm-pre-reloc;
+	};
+
+	aliases {
+		/* Aliases for gpios so as to use sequence */
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+		spi0 = &qspi;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+		pin-controller {
+			u-boot,dm-pre-reloc;
+		};
+
+		fmc: fmc@A0000000 {
+			compatible = "st,stm32-fmc";
+			reg = <0xA0000000 0x1000>;
+			clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>;
+			st,syscfg = <&syscfg>;
+			pinctrl-0 = <&fmc_pins_d32>;
+			pinctrl-names = "default";
+			st,mem_remap = <4>;
+			u-boot,dm-pre-reloc;
+
+			/*
+			 * Memory configuration from sdram
+			 * MICRON MT48LC4M32B2B5-6A
+			 */
+			bank0: bank@0 {
+			       st,sdram-control = /bits/ 8 <NO_COL_8
+							    NO_ROW_12
+							    MWIDTH_32
+							    BANKS_4
+							    CAS_3
+							    SDCLK_2
+							    RD_BURST_EN
+							    RD_PIPE_DL_0>;
+			       st,sdram-timing = /bits/ 8 <TMRD_2
+							   TXSR_6
+							   TRAS_4
+							   TRC_6
+							   TWR_2
+							   TRP_2
+							   TRCD_2>;
+			       st,sdram-refcount = < 1292 >;
+		       };
+		};
+
+		qspi: spi@A0001000 {
+			compatible = "st,stm32f469-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
+			reg-names = "qspi", "qspi_mm";
+			interrupts = <91>;
+			spi-max-frequency = <108000000>;
+			clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
+			resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
+			pinctrl-0 = <&qspi_pins>;
+		};
+	};
+};
+
+&clk_hse {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_i2s_ckin {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_lse {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioa {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiob {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiod {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioe {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiof {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiog {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioh {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioi {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioj {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiok {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	fmc_pins_d32: fmc_d32@0 {
+		u-boot,dm-pre-reloc;
+		pins
+		{
+			pinmux = <STM32_PINMUX('I',10, AF12)>, /* D31 */
+				 <STM32_PINMUX('I', 9, AF12)>, /* D30 */
+				 <STM32_PINMUX('I', 7, AF12)>, /* D29 */
+				 <STM32_PINMUX('I', 6, AF12)>, /* D28 */
+				 <STM32_PINMUX('I', 3, AF12)>, /* D27 */
+				 <STM32_PINMUX('I', 2, AF12)>, /* D26 */
+				 <STM32_PINMUX('I', 1, AF12)>, /* D25 */
+				 <STM32_PINMUX('I', 0, AF12)>, /* D24 */
+				 <STM32_PINMUX('H',15, AF12)>, /* D23 */
+				 <STM32_PINMUX('H',14, AF12)>, /* D22 */
+				 <STM32_PINMUX('H',13, AF12)>, /* D21 */
+				 <STM32_PINMUX('H',12, AF12)>, /* D20 */
+				 <STM32_PINMUX('H',11, AF12)>, /* D19 */
+				 <STM32_PINMUX('H',10, AF12)>, /* D18 */
+				 <STM32_PINMUX('H', 9, AF12)>, /* D17 */
+				 <STM32_PINMUX('H', 8, AF12)>, /* D16 */
+
+				 <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D09 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D08 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D07 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D06 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D05 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D04 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D03 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D02 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D01 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D00 */
+
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+				 <STM32_PINMUX('I', 4, AF12)>, /* NBL2 */
+				 <STM32_PINMUX('I', 5, AF12)>, /* NBL3 */
+
+				 <STM32_PINMUX('G', 5, AF12)>, /* BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* BA0 */
+
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A09 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A08 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A07 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A06 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A05 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A04 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A03 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A02 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A01 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A00 */
+
+				 <STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
+				 <STM32_PINMUX('C', 0, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('H', 2, AF12)>, /* SDCKE0 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
+			slew-rate = <2>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	qspi_pins: qspi@0 {
+		pins {
+			pinmux = <STM32_PINMUX('F',10, AF9)>, /* CLK */
+				 <STM32_PINMUX('B', 6, AF10)>, /* BK1_NCS */
+				 <STM32_PINMUX('F', 8, AF10)>, /* BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* BK1_IO3 */
+			slew-rate = <2>;
+		};
+	};
+
+	usart3_pins_a: usart3-0	{
+		u-boot,dm-pre-reloc;
+		pins1 {
+			u-boot,dm-pre-reloc;
+		};
+		pins2 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&pwrcfg {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>;
+	flash0: n25q128a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <108000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&rcc {
+	u-boot,dm-pre-reloc;
+};
+
+&syscfg {
+	u-boot,dm-pre-reloc;
+};
+
+&timer5 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f469-disco.dts b/roms/u-boot/arch/arm/dts/stm32f469-disco.dts
new file mode 100644
index 000000000..23d87ee27
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f469-disco.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
+ *
+ */
+
+/dts-v1/;
+#include "stm32f469.dtsi"
+#include "stm32f469-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32F469i-DISCO board";
+	compatible = "st,stm32f469i-disco", "st,stm32f469";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x1000000>;
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_dsi: vdd-dsi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_dsi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
+		};
+		led-red {
+			gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
+		};
+		led-blue {
+			gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "User";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* This turns on vbus for otg for host mode (dwc2) */
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+	};
+};
+
+&rcc {
+	compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc";
+};
+
+&clk_hse {
+	clock-frequency = <8000000>;
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>; /* dsi virtual channel (0..3) */
+		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_dsi>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint@0 {
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&timers1 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&sdio {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
+	broken-cd;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_pins_od>;
+	bus-width = <4>;
+};
+
+&usart3 {
+	pinctrl-0 = <&usart3_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_fs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_fs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f469-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32f469-pinctrl.dtsi
new file mode 100644
index 000000000..1e2bb0191
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f469-pinctrl.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f469-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 6>,
+					      <&pinctrl 12 156 4>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 3 163 5>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f469.dtsi b/roms/u-boot/arch/arm/dts/stm32f469.dtsi
new file mode 100644
index 000000000..5f6a7976b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f469.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright (C) STMicroelectronics 2017 - All Rights Reserved */
+
+#include "stm32f429.dtsi"
+
+/ {
+	soc {
+		dsi: dsi@40016c00 {
+			compatible = "st,stm32-dsi";
+			reg = <0x40016c00 0x800>;
+			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
+			reset-names = "apb";
+			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
+			clock-names = "pclk", "ref";
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f7-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32f7-pinctrl.dtsi
new file mode 100644
index 000000000..fe4cfda72
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f7-pinctrl.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			cec_pins_a: cec-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
+					slew-rate = <0>;
+					drive-open-drain;
+					bias-disable;
+				};
+			};
+
+			usart1_pins_a: usart1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			usart1_pins_b: usart1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			i2c1_pins_b: i2c1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
+						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg-hs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_b: usbotg-hs-1 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg-fs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_a: sdio-pins-a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1 CLK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od_a: sdio-pins-od-a-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1 CLK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_b: sdio-pins-b-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, AF11)>, /* SDMMC2 CLK */
+						 <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od_b: sdio-pins-od-b-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, AF11)>; /* SDMMC2 CLK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f7-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32f7-u-boot.dtsi
new file mode 100644
index 000000000..46bd1102d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f7-u-boot.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <dt-bindings/memory/stm32-sdram.h>
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+
+		fmc: fmc@A0000000 {
+			compatible = "st,stm32-fmc";
+			reg = <0xA0000000 0x1000>;
+			clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>;
+			pinctrl-0 = <&fmc_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+			u-boot,dm-pre-reloc;
+		};
+
+		mac: ethernet@40028000 {
+			compatible = "st,stm32-dwmac";
+			reg = <0x40028000 0x8000>;
+			reg-names = "stmmaceth";
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(ETHMAC)>,
+				 <&rcc 0 STM32F7_AHB1_CLOCK(ETHMACTX)>,
+				 <&rcc 0 STM32F7_AHB1_CLOCK(ETHMACRX)>;
+			interrupts = <61>, <62>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			snps,pbl = <8>;
+			snps,mixed-burst;
+			pinctrl-0 = <&ethernet_mii>;
+			phy-mode = "rmii";
+			phy-handle = <&phy0>;
+
+			status = "okay";
+
+			mdio0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+		};
+
+		qspi: spi@A0001000 {
+			compatible = "st,stm32f469-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
+			reg-names = "qspi", "qspi_mm";
+			interrupts = <92>;
+			spi-max-frequency = <108000000>;
+			clocks = <&rcc 0 STM32F7_AHB3_CLOCK(QSPI)>;
+			resets = <&rcc STM32F7_AHB3_RESET(QSPI)>;
+			pinctrl-0 = <&qspi_pins>;
+
+			status = "okay";
+		};
+	};
+};
+
+&clk_hse {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioa {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiob {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiod {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioe {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiof {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiog {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioh {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioi {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+
+	fmc_pins: fmc@0 {
+		u-boot,dm-pre-reloc;
+		pins
+		{
+		 u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&pwrcfg {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	u-boot,dm-pre-reloc;
+};
+
+&timer5 {
+	u-boot,dm-pre-reloc;
+};
+
+&usart1 {
+	u-boot,dm-pre-reloc;
+	clocks = <&rcc 0 STM32F7_APB2_CLOCK(USART1)>;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32f746-disco-u-boot.dtsi
new file mode 100644
index 000000000..4f34fc9a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f746-disco-u-boot.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <stm32f7-u-boot.dtsi>
+/{
+	chosen {
+		bootargs = "root=/dev/ram rdinit=/linuxrc";
+	};
+
+	aliases {
+		/* Aliases for gpios so as to use sequence */
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+		mmc0 = &sdio1;
+		spi0 = &qspi;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiok 3 0>;
+		status = "okay";
+	};
+
+	button1 {
+		compatible = "st,button1";
+		button-gpio = <&gpioi 11 0>;
+	};
+
+	led1 {
+		compatible = "st,led1";
+		led-gpio = <&gpioi 1 0>;
+	};
+
+	panel-rgb@0 {
+		compatible = "simple-panel";
+		backlight = <&backlight>;
+		enable-gpios = <&gpioi 12 0>;
+		status = "okay";
+
+		display-timings {
+			timing@0 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <2>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				vfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <0>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	soc {
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
+			pinctrl-0 = <&ltdc_pins>;
+
+			status = "okay";
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&fmc {
+	/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
+	bank1: bank@0 {
+		u-boot,dm-pre-reloc;
+		st,sdram-control = /bits/ 8 <NO_COL_8
+					     NO_ROW_12
+					     MWIDTH_16
+					     BANKS_4
+					     CAS_3
+					     SDCLK_2
+					     RD_BURST_EN
+					     RD_PIPE_DL_0>;
+		st,sdram-timing = /bits/ 8 <TMRD_2
+					    TXSR_6
+					    TRAS_4
+					    TRC_6
+					    TWR_2
+					    TRP_2
+					    TRCD_2>;
+		/* refcount = (64msec/total_row_sdram)*freq - 20 */
+		st,sdram-refcount = < 1542 >;
+	};
+};
+
+&pinctrl {
+	ethernet_mii: mii@0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',13, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G',14, AF11)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G',11, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>, /* ETH_RMII_CRS_DV */
+				 <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>; /* ETH_RMII_RXD1 */
+			slew-rate = <2>;
+		};
+	};
+
+	fmc_pins: fmc@0 {
+		pins {
+			pinmux = <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D9 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D8 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D7 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D6 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D5 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D4 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D3 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D2 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D1 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D0 */
+
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
+
+				 <STM32_PINMUX('G', 5, AF12)>, /* BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* BA0 */
+
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A9 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A8 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A7 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A6 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A5 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A4 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A3 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A2 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A1 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A0 */
+
+				 <STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
+				 <STM32_PINMUX('H', 5, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('C', 3, AF12)>, /* SDCKE0 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
+			slew-rate = <2>;
+		};
+	};
+
+	ltdc_pins: ltdc@0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 4, AF14)>, /* B0 */
+				 <STM32_PINMUX('G',12, AF14)>, /* B4 */
+				 <STM32_PINMUX('I', 9, AF14)>, /* VSYNC */
+				 <STM32_PINMUX('I',10, AF14)>, /* HSYNC */
+				 <STM32_PINMUX('I',14, AF14)>, /* CLK */
+				 <STM32_PINMUX('I',15, AF14)>, /* R0 */
+				 <STM32_PINMUX('J', 0, AF14)>, /* R1 */
+				 <STM32_PINMUX('J', 1, AF14)>, /* R2 */
+				 <STM32_PINMUX('J', 2, AF14)>, /* R3 */
+				 <STM32_PINMUX('J', 3, AF14)>, /* R4 */
+				 <STM32_PINMUX('J', 4, AF14)>, /* R5 */
+				 <STM32_PINMUX('J', 5, AF14)>, /* R6 */
+				 <STM32_PINMUX('J', 6, AF14)>, /* R7 */
+				 <STM32_PINMUX('J', 7, AF14)>, /* G0 */
+				 <STM32_PINMUX('J', 8, AF14)>, /* G1 */
+				 <STM32_PINMUX('J', 9, AF14)>, /* G2 */
+				 <STM32_PINMUX('J',10, AF14)>, /* G3 */
+				 <STM32_PINMUX('J',11, AF14)>, /* G4 */
+				 <STM32_PINMUX('J',13, AF14)>, /* B1 */
+				 <STM32_PINMUX('J',14, AF14)>, /* B2 */
+				 <STM32_PINMUX('J',15, AF14)>, /* B3 */
+				 <STM32_PINMUX('K', 0, AF14)>, /* G5 */
+				 <STM32_PINMUX('K', 1, AF14)>, /* G6 */
+				 <STM32_PINMUX('K', 2, AF14)>, /* G7 */
+				 <STM32_PINMUX('K', 4, AF14)>, /* B5 */
+				 <STM32_PINMUX('K', 5, AF14)>, /* B6 */
+				 <STM32_PINMUX('K', 6, AF14)>, /* B7 */
+				 <STM32_PINMUX('K', 7, AF14)>; /* DE */
+			slew-rate = <2>;
+		};
+	};
+
+	qspi_pins: qspi@0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 2, AF9)>, /* CLK */
+				 <STM32_PINMUX('B', 6, AF10)>, /* BK1_NCS */
+				 <STM32_PINMUX('D',11, AF9)>, /* BK1_IO0 */
+				 <STM32_PINMUX('D',12, AF9)>, /* BK1_IO1 */
+				 <STM32_PINMUX('D',13, AF9)>, /* BK1_IO3 */
+				 <STM32_PINMUX('E', 2, AF9)>; /* BK1_IO2 */
+			slew-rate = <2>;
+		};
+	};
+
+	usart1_pins_b: usart1-1	{
+		u-boot,dm-pre-reloc;
+		pins1 {
+			u-boot,dm-pre-reloc;
+		};
+		pins2 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&pwrcfg {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>;
+	qflash0: n25q128a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <108000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f746-disco.dts b/roms/u-boot/arch/arm/dts/stm32f746-disco.dts
new file mode 100644
index 000000000..9430dc08e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f746-disco.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include "stm32f746-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32F746-DISCO board";
+	compatible = "st,stm32f746-disco", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	/* This turns on vbus for otg fs for host mode (dwc2) */
+	vcc5v_otg_fs: vcc5v-otg-fs-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpiod 5 0>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&sdio1 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_a>;
+	pinctrl-1 = <&sdio_pins_od_a>;
+	bus-width = <4>;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_fs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_fs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f746-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32f746-pinctrl.dtsi
new file mode 100644
index 000000000..fcfd2ac72
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f746-pinctrl.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32f7-pinctrl.dtsi"
+
+&pinctrl{
+	compatible = "st,stm32f746-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f746.dtsi b/roms/u-boot/arch/arm/dts/stm32f746.dtsi
new file mode 100644
index 000000000..ba9b3cd03
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f746.dtsi
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_i2s_ckin: clk-i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+		};
+	};
+
+	soc {
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+			status = "disabled";
+		};
+
+		timers2: timers@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+		};
+
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+			status = "disabled";
+		};
+
+		timers3: timers@40000400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+			status = "disabled";
+		};
+
+		timers4: timers@40000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+		};
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+		};
+
+		timers5: timers@40000c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000C00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+			status = "disabled";
+		};
+
+		timers6: timers@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+			status = "disabled";
+		};
+
+		timers7: timers@40001400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		timers12: timers@40001800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timers@40001c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001C00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers14: timers@40002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		rtc: rtc@40002800 {
+			compatible = "st,stm32-rtc";
+			reg = <0x40002800 0x400>;
+			clocks = <&rcc 1 CLK_RTC>;
+			assigned-clocks = <&rcc 1 CLK_RTC>;
+			assigned-clock-parents = <&rcc 1 CLK_LSE>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 1>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks = <&rcc 1 CLK_USART2>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&rcc 1 CLK_USART3>;
+			status = "disabled";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&rcc 1 CLK_UART4>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&rcc 1 CLK_UART5>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40005400 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005400 0x400>;
+			interrupts = <31>,
+				     <32>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+			clocks = <&rcc 1 CLK_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40005800 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005800 0x400>;
+			interrupts = <33>,
+				     <34>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C2)>;
+			clocks = <&rcc 1 CLK_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40005C00 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005C00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
+			clocks = <&rcc 1 CLK_I2C3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@40006000 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40006000 0x400>;
+			interrupts = <95>,
+				     <96>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C4)>;
+			clocks = <&rcc 1 CLK_I2C4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cec: cec@40006c00 {
+			compatible = "st,stm32-cec";
+			reg = <0x40006C00 0x400>;
+			interrupts = <94>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>;
+			clock-names = "cec", "hdmi-cec";
+			status = "disabled";
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&rcc 1 CLK_UART7>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&rcc 1 CLK_UART8>;
+			status = "disabled";
+		};
+
+		timers1: timers@40010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+		};
+
+		timers8: timers@40010400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&rcc 1 CLK_USART1>;
+			status = "disabled";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&rcc 1 CLK_USART6>;
+			status = "disabled";
+		};
+
+		sdio2: sdio2@40011c00 {
+			compatible = "arm,pl180", "arm,primecell";
+			arm,primecell-periphid = <0x00880180>;
+			reg = <0x40011c00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC2)>;
+			clock-names = "apb_pclk";
+			interrupts = <103>;
+			max-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		sdio1: sdio1@40012c00 {
+			compatible = "arm,pl180", "arm,primecell";
+			arm,primecell-periphid = <0x00880180>;
+			reg = <0x40012c00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC1)>;
+			clock-names = "apb_pclk";
+			interrupts = <49>;
+			max-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		syscfg: syscon@40013800 {
+			compatible = "st,stm32-syscfg", "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
+		timers9: timers@40014000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@8 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <8>;
+				status = "disabled";
+			};
+		};
+
+		timers10: timers@40014400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers11: timers@40014800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		pwrcfg: power-config@40007000 {
+			compatible = "st,stm32-power-config", "syscon";
+			reg = <0x40007000 0x400>;
+		};
+
+		crc: crc@40023000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x40023000 0x400>;
+			clocks = <&rcc 0 12>;
+			status = "disabled";
+		};
+
+		rcc: rcc@40023800 {
+			#reset-cells = <1>;
+			#clock-cells = <2>;
+			compatible = "st,stm32f746-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
+			st,syscfg = <&pwrcfg>;
+			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+			assigned-clock-rates = <1000000>;
+		};
+
+		dma1: dma-controller@40026000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA1)>;
+			#dma-cells = <4>;
+			status = "disabled";
+		};
+
+		dma2: dma-controller@40026400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA2)>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			status = "disabled";
+		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "st,stm32f7-hsotg";
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>;
+			clock-names = "otg";
+			g-rx-fifo-size = <256>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		usbotg_fs: usb@50000000 {
+			compatible = "st,stm32f4x9-fsotg";
+			reg = <0x50000000 0x40000>;
+			interrupts = <67>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+	};
+};
+
+&systick {
+	clocks = <&rcc 1 0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32f769-disco-u-boot.dtsi
new file mode 100644
index 000000000..7dfe430a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f769-disco-u-boot.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <stm32f7-u-boot.dtsi>
+/{
+	chosen {
+		bootargs = "root=/dev/ram rdinit=/linuxrc";
+	};
+
+	aliases {
+		/* Aliases for gpios so as to use sequence */
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+		mmc0 = &sdio2;
+		spi0 = &qspi;
+	};
+
+	button1 {
+		compatible = "st,button1";
+		button-gpio = <&gpioa 0 0>;
+	};
+
+	dsi_host: dsi_host {
+		compatible = "synopsys,dw-mipi-dsi";
+		status = "okay";
+	};
+
+	led1 {
+		compatible = "st,led1";
+		led-gpio = <&gpioj 5 0>;
+	};
+
+	panel: panel {
+		compatible = "orisetech,otm8009a";
+		reset-gpios = <&gpioj 15 1>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+
+	soc {
+		dsi: dsi@40016c00 {
+			compatible = "st,stm32-dsi";
+			reg = <0x40016C00 0x800>;
+			resets = <&rcc STM32F7_APB2_RESET(DSI)>;
+			clocks =  <&rcc 0 STM32F7_APB2_CLOCK(DSI)>,
+				  <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>,
+				  <&clk_hse>;
+			clock-names = "pclk", "px_clk", "ref";
+			u-boot,dm-pre-reloc;
+			status = "okay";
+
+			ports {
+				port@0 {
+					dsi_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+				port@1 {
+					dsi_in: endpoint {
+						remote-endpoint = <&dp_out>;
+					};
+				};
+			};
+		};
+
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
+
+			status = "okay";
+			u-boot,dm-pre-reloc;
+
+			ports {
+				port@0 {
+					dp_out: endpoint {
+						remote-endpoint = <&dsi_in>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&fmc {
+	/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
+	bank1: bank@0 {
+		u-boot,dm-pre-reloc;
+		st,sdram-control = /bits/ 8 <NO_COL_8
+					     NO_ROW_12
+					     MWIDTH_32
+					     BANKS_4
+					     CAS_3
+					     SDCLK_2
+					     RD_BURST_EN
+					     RD_PIPE_DL_0>;
+		st,sdram-timing = /bits/ 8 <TMRD_2
+					    TXSR_6
+					    TRAS_4
+					    TRC_6
+					    TWR_2
+					    TRP_2
+					    TRCD_2>;
+		/* refcount = (64msec/total_row_sdram)*freq - 20 */
+		st,sdram-refcount = < 1542 >;
+	};
+};
+
+&pinctrl {
+	ethernet_mii: mii@0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',13, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G',14, AF11)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G',11, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>, /* ETH_RMII_CRS_DV */
+				 <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>; /* ETH_RMII_RXD1 */
+			slew-rate = <2>;
+		};
+	};
+
+	fmc_pins: fmc@0 {
+		pins {
+			pinmux = <STM32_PINMUX('I',10, AF12)>, /* D31 */
+				 <STM32_PINMUX('I', 9, AF12)>, /* D30 */
+				 <STM32_PINMUX('I', 7, AF12)>, /* D29 */
+				 <STM32_PINMUX('I', 6, AF12)>, /* D28 */
+				 <STM32_PINMUX('I', 3, AF12)>, /* D27 */
+				 <STM32_PINMUX('I', 2, AF12)>, /* D26 */
+				 <STM32_PINMUX('I', 1, AF12)>, /* D25 */
+				 <STM32_PINMUX('I', 0, AF12)>, /* D24 */
+				 <STM32_PINMUX('H',15, AF12)>, /* D23 */
+				 <STM32_PINMUX('H',14, AF12)>, /* D22 */
+				 <STM32_PINMUX('H',13, AF12)>, /* D21 */
+				 <STM32_PINMUX('H',12, AF12)>, /* D20 */
+				 <STM32_PINMUX('H',11, AF12)>, /* D19 */
+				 <STM32_PINMUX('H',10, AF12)>, /* D18 */
+				 <STM32_PINMUX('H', 9, AF12)>, /* D17 */
+				 <STM32_PINMUX('H', 8, AF12)>, /* D16 */
+
+				 <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D9 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D8 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D7 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D6 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D5 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D4 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D3 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D2 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D1 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D0 */
+
+				 <STM32_PINMUX('I', 5, AF12)>, /* NBL3 */
+				 <STM32_PINMUX('I', 4, AF12)>, /* NBL2 */
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
+
+				 <STM32_PINMUX('G', 5, AF12)>, /* BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* BA0 */
+
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A9 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A8 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A7 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A6 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A5 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A4 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A3 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A2 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A1 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A0 */
+
+				 <STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
+				 <STM32_PINMUX('H', 5, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('H', 2, AF12)>, /* SDCKE0 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
+			slew-rate = <2>;
+		};
+	};
+
+	qspi_pins: qspi@0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 2, AF9)>, /* CLK */
+				 <STM32_PINMUX('B', 6, AF10)>, /* BK1_NCS */
+				 <STM32_PINMUX('C', 9, AF9)>, /* BK1_IO0 */
+				 <STM32_PINMUX('C',10, AF9)>, /* BK1_IO1 */
+				 <STM32_PINMUX('D',13, AF9)>, /* BK1_IO3 */
+				 <STM32_PINMUX('E', 2, AF9)>; /* BK1_IO2 */
+			slew-rate = <2>;
+		};
+	};
+
+	usart1_pins_a: usart1-0	{
+		u-boot,dm-pre-reloc;
+		pins1 {
+			u-boot,dm-pre-reloc;
+		};
+		pins2 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&qspi {
+	reg = <0xA0001000 0x1000>, <0x90000000 0x4000000>;
+	flash0: mx66l51235l@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <108000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f769-disco.dts b/roms/u-boot/arch/arm/dts/stm32f769-disco.dts
new file mode 100644
index 000000000..03cfbd7cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f769-disco.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include "stm32f769-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32F769-DISCO board";
+	compatible = "st,stm32f769-disco", "st,stm32f769";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x1000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-red {
+			gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&rcc {
+	compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc";
+};
+
+&cec {
+	pinctrl-0 = <&cec_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio2 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
+	broken-cd;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_b>;
+	pinctrl-1 = <&sdio_pins_od_b>;
+	bus-width = <4>;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "otg";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32f769-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32f769-pinctrl.dtsi
new file mode 100644
index 000000000..31005dd99
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32f769-pinctrl.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32f7-pinctrl.dtsi"
+
+&pinctrl{
+	compatible = "st,stm32f769-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h7-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32h7-pinctrl.dtsi
new file mode 100644
index 000000000..aefa32468
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h7-pinctrl.dtsi
@@ -0,0 +1,274 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
+				 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	ethernet_rmii: rmii-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, AF11)>,
+				 <STM32_PINMUX('G', 13, AF11)>,
+				 <STM32_PINMUX('G', 12, AF11)>,
+				 <STM32_PINMUX('C', 4, AF11)>,
+				 <STM32_PINMUX('C', 5, AF11)>,
+				 <STM32_PINMUX('A', 7, AF11)>,
+				 <STM32_PINMUX('C', 1, AF11)>,
+				 <STM32_PINMUX('A', 2, AF11)>,
+				 <STM32_PINMUX('A', 1, AF11)>;
+			slew-rate = <2>;
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	spi1_pins: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>,
+				/* SPI1_CLK */
+				 <STM32_PINMUX('B', 5, AF5)>;
+				/* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 9, AF5)>;
+				/* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	uart4_pins: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	usart1_pins: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_pins: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_pins: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usbotg_hs_pins_a: usbotg-hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
+					 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
+					 <STM32_PINMUX('C', 0, AF10)>,	/* ULPI_STP> */
+					 <STM32_PINMUX('A', 5, AF10)>,	/* ULPI_CK> */
+					 <STM32_PINMUX('A', 3, AF10)>,	/* ULPI_D0> */
+					 <STM32_PINMUX('B', 0, AF10)>,	/* ULPI_D1> */
+					 <STM32_PINMUX('B', 1, AF10)>,	/* ULPI_D2> */
+					 <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
+					 <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
+					 <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
+					 <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
+					 <STM32_PINMUX('B', 5, AF10)>;	/* ULPI_D7> */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h7-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32h7-u-boot.dtsi
new file mode 100644
index 000000000..84dc7656d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h7-u-boot.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <dt-bindings/memory/stm32-sdram.h>
+
+/{
+	clocks {
+		u-boot,dm-pre-reloc;
+	};
+
+	aliases {
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+		mmc0 = &sdmmc1;
+		pinctrl0 = &pinctrl;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+		pin-controller {
+			u-boot,dm-pre-reloc;
+		};
+
+		fmc: fmc@52004000 {
+			compatible = "st,stm32h7-fmc";
+			reg = <0x52004000 0x1000>;
+			clocks = <&rcc FMC_CK>;
+
+			pinctrl-0 = <&fmc_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+};
+
+&clk_hse {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_i2s {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_lse {
+	u-boot,dm-pre-reloc;
+};
+
+
+&fmc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioa {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpiob {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpioc {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpiod {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpioe {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpiof {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpiog {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpioh {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpioi {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpioj {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&gpiok {
+	u-boot,dm-pre-reloc;
+	compatible = "st,stm32-gpio";
+};
+
+&pwrcfg {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc1 {
+	compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+};
+
+&timer5 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h743.dtsi b/roms/u-boot/arch/arm/dts/stm32h743.dtsi
new file mode 100644
index 000000000..ed6857512
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h743.dtsi
@@ -0,0 +1,700 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32h7-clks.h>
+#include <dt-bindings/mfd/stm32h7-rcc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_i2s: i2s_ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+	};
+
+	soc {
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc TIM5_CK>;
+		};
+
+		lptimer1: timer@40002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40002400 0x400>;
+			clocks = <&rcc LPTIM1_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			resets = <&rcc STM32H7_APB1L_RESET(SPI2)>;
+			clocks = <&rcc SPI2_CK>;
+			status = "disabled";
+
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			resets = <&rcc STM32H7_APB1L_RESET(SPI3)>;
+			clocks = <&rcc SPI3_CK>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			status = "disabled";
+			clocks = <&rcc USART2_CK>;
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			status = "disabled";
+			clocks = <&rcc USART3_CK>;
+		};
+
+		uart4: serial@40004c00 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			status = "disabled";
+			clocks = <&rcc UART4_CK>;
+		};
+
+		i2c1: i2c@40005400 {
+			compatible = "st,stm32f7-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40005400 0x400>;
+			interrupts = <31>,
+				     <32>;
+			resets = <&rcc STM32H7_APB1L_RESET(I2C1)>;
+			clocks = <&rcc I2C1_CK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40005800 {
+			compatible = "st,stm32f7-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40005800 0x400>;
+			interrupts = <33>,
+				     <34>;
+			resets = <&rcc STM32H7_APB1L_RESET(I2C2)>;
+			clocks = <&rcc I2C2_CK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40005c00 {
+			compatible = "st,stm32f7-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40005C00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32H7_APB1L_RESET(I2C3)>;
+			clocks = <&rcc I2C3_CK>;
+			status = "disabled";
+		};
+
+		dac: dac@40007400 {
+			compatible = "st,stm32h7-dac-core";
+			reg = <0x40007400 0x400>;
+			clocks = <&rcc DAC12_CK>;
+			clock-names = "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dac1: dac@1 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				status = "disabled";
+			};
+
+			dac2: dac@2 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			status = "disabled";
+			clocks = <&rcc USART1_CK>;
+		};
+
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			resets = <&rcc STM32H7_APB2_RESET(SPI1)>;
+			clocks = <&rcc SPI1_CK>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			resets = <&rcc STM32H7_APB2_RESET(SPI4)>;
+			clocks = <&rcc SPI4_CK>;
+			status = "disabled";
+		};
+
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			resets = <&rcc STM32H7_APB2_RESET(SPI5)>;
+			clocks = <&rcc SPI5_CK>;
+			status = "disabled";
+		};
+
+		dma1: dma-controller@40020000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40020000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc DMA1_CK>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+			status = "disabled";
+		};
+
+		dma2: dma-controller@40020400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40020400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc DMA2_CK>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+			status = "disabled";
+		};
+
+		dmamux1: dma-router@40020800 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x40020800 0x40>;
+			#dma-cells = <3>;
+			dma-channels = <16>;
+			dma-requests = <128>;
+			dma-masters = <&dma1 &dma2>;
+			clocks = <&rcc DMA1_CK>;
+		};
+
+		adc_12: adc@40022000 {
+			compatible = "st,stm32h7-adc-core";
+			reg = <0x40022000 0x400>;
+			interrupts = <18>;
+			clocks = <&rcc ADC12_CK>;
+			clock-names = "bus";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32h7-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_12>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32h7-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc_12>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "st,stm32f7-hsotg";
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc USB1OTG_CK>;
+			clock-names = "otg";
+			g-rx-fifo-size = <256>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		usbotg_fs: usb@40080000 {
+			compatible = "st,stm32f4x9-fsotg";
+			reg = <0x40080000 0x40000>;
+			interrupts = <101>;
+			clocks = <&rcc USB2OTG_CK>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		ltdc: display-controller@50001000 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x50001000 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32H7_APB3_RESET(LTDC)>;
+			clocks = <&rcc LTDC_CK>;
+			clock-names = "lcd";
+			status = "disabled";
+		};
+
+		mdma1: dma-controller@52000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x52000000 0x1000>;
+			interrupts = <122>;
+			clocks = <&rcc MDMA_CK>;
+			#dma-cells = <5>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+		};
+
+		sdmmc1: sdmmc@52007000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x52007000 0x1000>;
+			interrupts = <49>;
+			interrupt-names	= "cmd_irq";
+			clocks = <&rcc SDMMC1_CK>;
+			clock-names = "apb_pclk";
+			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+		};
+
+		sdmmc2: sdmmc@48022400 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x48022400 0x400>;
+			interrupts = <124>;
+			interrupt-names	= "cmd_irq";
+			clocks = <&rcc SDMMC2_CK>;
+			clock-names = "apb_pclk";
+			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+		};
+
+		exti: interrupt-controller@58000000 {
+			compatible = "st,stm32h7-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x58000000 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>;
+		};
+
+		syscfg: syscon@58000400 {
+			compatible = "st,stm32-syscfg", "syscon";
+			reg = <0x58000400 0x400>;
+		};
+
+		spi6: spi@58001400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x58001400 0x400>;
+			interrupts = <86>;
+			resets = <&rcc STM32H7_APB4_RESET(SPI6)>;
+			clocks = <&rcc SPI6_CK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@58001c00 {
+			compatible = "st,stm32f7-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x58001C00 0x400>;
+			interrupts = <95>,
+				     <96>;
+			resets = <&rcc STM32H7_APB4_RESET(I2C4)>;
+			clocks = <&rcc I2C4_CK>;
+			status = "disabled";
+		};
+
+		lptimer2: timer@58002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002400 0x400>;
+			clocks = <&rcc LPTIM2_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@1 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		lptimer3: timer@58002800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002800 0x400>;
+			clocks = <&rcc LPTIM3_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@2 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		lptimer4: timer@58002c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002c00 0x400>;
+			clocks = <&rcc LPTIM4_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		lptimer5: timer@58003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58003000 0x400>;
+			clocks = <&rcc LPTIM5_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		vrefbuf: regulator@58003c00 {
+			compatible = "st,stm32-vrefbuf";
+			reg = <0x58003C00 0x8>;
+			clocks = <&rcc VREF_CK>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <2500000>;
+			status = "disabled";
+		};
+
+		rtc: rtc@58004000 {
+			compatible = "st,stm32h7-rtc";
+			reg = <0x58004000 0x400>;
+			clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
+			clock-names = "pclk", "rtc_ck";
+			assigned-clocks = <&rcc RTC_CK>;
+			assigned-clock-parents = <&rcc LSE_CK>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
+			status = "disabled";
+		};
+
+		rcc: reset-clock-controller@58024400 {
+			compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+			reg = <0x58024400 0x400>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
+			st,syscfg = <&pwrcfg>;
+		};
+
+		pwrcfg: power-config@58024800 {
+			compatible = "st,stm32-power-config", "syscon";
+			reg = <0x58024800 0x400>;
+		};
+
+		adc_3: adc@58026000 {
+			compatible = "st,stm32h7-adc-core";
+			reg = <0x58026000 0x400>;
+			interrupts = <127>;
+			clocks = <&rcc ADC3_CK>;
+			clock-names = "bus";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc3: adc@0 {
+				compatible = "st,stm32h7-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_3>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+		};
+
+		mac: ethernet@40028000 {
+			compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+			reg = <0x40028000 0x8000>;
+			reg-names = "stmmaceth";
+			interrupts = <61>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+			clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>;
+			st,syscon = <&syscfg 0x4>;
+			snps,pbl = <8>;
+			status = "disabled";
+		};
+
+		pinctrl: pin-controller@58020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32h743-pinctrl";
+			ranges = <0 0x58020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@58020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA_CK>;
+				st,bank-name = "GPIOA";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@58020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc GPIOB_CK>;
+				st,bank-name = "GPIOB";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@58020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc GPIOC_CK>;
+				st,bank-name = "GPIOC";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@58020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc GPIOD_CK>;
+				st,bank-name = "GPIOD";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@58021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOE_CK>;
+				st,bank-name = "GPIOE";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@58021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc GPIOF_CK>;
+				st,bank-name = "GPIOF";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@58021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc GPIOG_CK>;
+				st,bank-name = "GPIOG";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@58021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc GPIOH_CK>;
+				st,bank-name = "GPIOH";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@58022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOI_CK>;
+				st,bank-name = "GPIOI";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@58022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc GPIOJ_CK>;
+				st,bank-name = "GPIOJ";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@58022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc GPIOK_CK>;
+				st,bank-name = "GPIOK";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
+	};
+};
+
+&systick {
+	clock-frequency = <250000000>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h743i-disco-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32h743i-disco-u-boot.dtsi
new file mode 100644
index 000000000..02e28c63f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h743i-disco-u-boot.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <stm32h7-u-boot.dtsi>
+
+&fmc {
+
+	/*
+	 * Memory configuration from sdram datasheet IS42S32800G-6BLI
+	 * first bank is bank@0
+	 * second bank is bank@1
+	 */
+	bank1: bank@1 {
+		st,sdram-control = /bits/ 8 <NO_COL_9
+					     NO_ROW_12
+					     MWIDTH_32
+					     BANKS_4
+					     CAS_2
+					     SDCLK_3
+					     RD_BURST_EN
+					     RD_PIPE_DL_0>;
+		st,sdram-timing = /bits/ 8 <TMRD_1
+					    TXSR_1
+					    TRAS_1
+					    TRC_6
+					    TRP_2
+					    TWR_1
+					    TRCD_1>;
+		st,sdram-refcount = <1539>;
+	};
+};
+
+&pinctrl {
+	fmc_pins: fmc@0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF12)>,
+				 <STM32_PINMUX('D', 1, AF12)>,
+				 <STM32_PINMUX('D', 8, AF12)>,
+				 <STM32_PINMUX('D', 9, AF12)>,
+				 <STM32_PINMUX('D',10, AF12)>,
+				 <STM32_PINMUX('D',14, AF12)>,
+				 <STM32_PINMUX('D',15, AF12)>,
+
+				 <STM32_PINMUX('E', 0, AF12)>,
+				 <STM32_PINMUX('E', 1, AF12)>,
+				 <STM32_PINMUX('E', 7, AF12)>,
+				 <STM32_PINMUX('E', 8, AF12)>,
+				 <STM32_PINMUX('E', 9, AF12)>,
+				 <STM32_PINMUX('E',10, AF12)>,
+				 <STM32_PINMUX('E',11, AF12)>,
+				 <STM32_PINMUX('E',12, AF12)>,
+				 <STM32_PINMUX('E',13, AF12)>,
+				 <STM32_PINMUX('E',14, AF12)>,
+				 <STM32_PINMUX('E',15, AF12)>,
+
+				 <STM32_PINMUX('F', 0, AF12)>,
+				 <STM32_PINMUX('F', 1, AF12)>,
+				 <STM32_PINMUX('F', 2, AF12)>,
+				 <STM32_PINMUX('F', 3, AF12)>,
+				 <STM32_PINMUX('F', 4, AF12)>,
+				 <STM32_PINMUX('F', 5, AF12)>,
+				 <STM32_PINMUX('F',11, AF12)>,
+				 <STM32_PINMUX('F',12, AF12)>,
+				 <STM32_PINMUX('F',13, AF12)>,
+				 <STM32_PINMUX('F',14, AF12)>,
+				 <STM32_PINMUX('F',15, AF12)>,
+
+				 <STM32_PINMUX('G', 0, AF12)>,
+				 <STM32_PINMUX('G', 1, AF12)>,
+				 <STM32_PINMUX('G', 2, AF12)>,
+				 <STM32_PINMUX('G', 4, AF12)>,
+				 <STM32_PINMUX('G', 5, AF12)>,
+				 <STM32_PINMUX('G', 8, AF12)>,
+				 <STM32_PINMUX('G',15, AF12)>,
+
+				 <STM32_PINMUX('H', 5, AF12)>,
+				 <STM32_PINMUX('H', 6, AF12)>,
+				 <STM32_PINMUX('H', 7, AF12)>,
+				 <STM32_PINMUX('H', 8, AF12)>,
+				 <STM32_PINMUX('H', 9, AF12)>,
+				 <STM32_PINMUX('H',10, AF12)>,
+				 <STM32_PINMUX('H',11, AF12)>,
+				 <STM32_PINMUX('H',12, AF12)>,
+				 <STM32_PINMUX('H',13, AF12)>,
+				 <STM32_PINMUX('H',14, AF12)>,
+				 <STM32_PINMUX('H',15, AF12)>,
+
+				 <STM32_PINMUX('I', 0, AF12)>,
+				 <STM32_PINMUX('I', 1, AF12)>,
+				 <STM32_PINMUX('I', 2, AF12)>,
+				 <STM32_PINMUX('I', 3, AF12)>,
+				 <STM32_PINMUX('I', 4, AF12)>,
+				 <STM32_PINMUX('I', 5, AF12)>,
+				 <STM32_PINMUX('I', 6, AF12)>,
+				 <STM32_PINMUX('I', 7, AF12)>,
+				 <STM32_PINMUX('I', 9, AF12)>,
+				 <STM32_PINMUX('I',10, AF12)>;
+
+			slew-rate = <3>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h743i-disco.dts b/roms/u-boot/arch/arm/dts/stm32h743i-disco.dts
new file mode 100644
index 000000000..3a01ebd56
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h743i-disco.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2017 - Patrice Chotard <patrice.chotard@foss.st.com>
+ *
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32H743i-Discovery board";
+	compatible = "st,stm32h743i-disco", "st,stm32h743";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@d0000000 {
+		device_type = "memory";
+		reg = <0xd0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart2;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0	= <&ethernet_rmii>;
+	pinctrl-names	= "default";
+	phy-mode	= "rmii";
+	phy-handle	= <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&usart2 {
+	pinctrl-0 = <&usart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h743i-eval-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32h743i-eval-u-boot.dtsi
new file mode 100644
index 000000000..02e28c63f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h743i-eval-u-boot.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <stm32h7-u-boot.dtsi>
+
+&fmc {
+
+	/*
+	 * Memory configuration from sdram datasheet IS42S32800G-6BLI
+	 * first bank is bank@0
+	 * second bank is bank@1
+	 */
+	bank1: bank@1 {
+		st,sdram-control = /bits/ 8 <NO_COL_9
+					     NO_ROW_12
+					     MWIDTH_32
+					     BANKS_4
+					     CAS_2
+					     SDCLK_3
+					     RD_BURST_EN
+					     RD_PIPE_DL_0>;
+		st,sdram-timing = /bits/ 8 <TMRD_1
+					    TXSR_1
+					    TRAS_1
+					    TRC_6
+					    TRP_2
+					    TWR_1
+					    TRCD_1>;
+		st,sdram-refcount = <1539>;
+	};
+};
+
+&pinctrl {
+	fmc_pins: fmc@0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF12)>,
+				 <STM32_PINMUX('D', 1, AF12)>,
+				 <STM32_PINMUX('D', 8, AF12)>,
+				 <STM32_PINMUX('D', 9, AF12)>,
+				 <STM32_PINMUX('D',10, AF12)>,
+				 <STM32_PINMUX('D',14, AF12)>,
+				 <STM32_PINMUX('D',15, AF12)>,
+
+				 <STM32_PINMUX('E', 0, AF12)>,
+				 <STM32_PINMUX('E', 1, AF12)>,
+				 <STM32_PINMUX('E', 7, AF12)>,
+				 <STM32_PINMUX('E', 8, AF12)>,
+				 <STM32_PINMUX('E', 9, AF12)>,
+				 <STM32_PINMUX('E',10, AF12)>,
+				 <STM32_PINMUX('E',11, AF12)>,
+				 <STM32_PINMUX('E',12, AF12)>,
+				 <STM32_PINMUX('E',13, AF12)>,
+				 <STM32_PINMUX('E',14, AF12)>,
+				 <STM32_PINMUX('E',15, AF12)>,
+
+				 <STM32_PINMUX('F', 0, AF12)>,
+				 <STM32_PINMUX('F', 1, AF12)>,
+				 <STM32_PINMUX('F', 2, AF12)>,
+				 <STM32_PINMUX('F', 3, AF12)>,
+				 <STM32_PINMUX('F', 4, AF12)>,
+				 <STM32_PINMUX('F', 5, AF12)>,
+				 <STM32_PINMUX('F',11, AF12)>,
+				 <STM32_PINMUX('F',12, AF12)>,
+				 <STM32_PINMUX('F',13, AF12)>,
+				 <STM32_PINMUX('F',14, AF12)>,
+				 <STM32_PINMUX('F',15, AF12)>,
+
+				 <STM32_PINMUX('G', 0, AF12)>,
+				 <STM32_PINMUX('G', 1, AF12)>,
+				 <STM32_PINMUX('G', 2, AF12)>,
+				 <STM32_PINMUX('G', 4, AF12)>,
+				 <STM32_PINMUX('G', 5, AF12)>,
+				 <STM32_PINMUX('G', 8, AF12)>,
+				 <STM32_PINMUX('G',15, AF12)>,
+
+				 <STM32_PINMUX('H', 5, AF12)>,
+				 <STM32_PINMUX('H', 6, AF12)>,
+				 <STM32_PINMUX('H', 7, AF12)>,
+				 <STM32_PINMUX('H', 8, AF12)>,
+				 <STM32_PINMUX('H', 9, AF12)>,
+				 <STM32_PINMUX('H',10, AF12)>,
+				 <STM32_PINMUX('H',11, AF12)>,
+				 <STM32_PINMUX('H',12, AF12)>,
+				 <STM32_PINMUX('H',13, AF12)>,
+				 <STM32_PINMUX('H',14, AF12)>,
+				 <STM32_PINMUX('H',15, AF12)>,
+
+				 <STM32_PINMUX('I', 0, AF12)>,
+				 <STM32_PINMUX('I', 1, AF12)>,
+				 <STM32_PINMUX('I', 2, AF12)>,
+				 <STM32_PINMUX('I', 3, AF12)>,
+				 <STM32_PINMUX('I', 4, AF12)>,
+				 <STM32_PINMUX('I', 5, AF12)>,
+				 <STM32_PINMUX('I', 6, AF12)>,
+				 <STM32_PINMUX('I', 7, AF12)>,
+				 <STM32_PINMUX('I', 9, AF12)>,
+				 <STM32_PINMUX('I',10, AF12)>;
+
+			slew-rate = <3>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h743i-eval.dts b/roms/u-boot/arch/arm/dts/stm32h743i-eval.dts
new file mode 100644
index 000000000..38cc7faf6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h743i-eval.dts
@@ -0,0 +1,160 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32H743i-EVAL board";
+	compatible = "st,stm32h743i-eval", "st,stm32h743";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@d0000000 {
+		device_type = "memory";
+		reg = <0xd0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2v9_sd: regulator-v2v9_sd {
+		compatible = "regulator-fixed";
+		regulator-name = "v2v9_sd";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-always-on;
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc USB1ULPI_CK>;
+		clock-names = "main_clk";
+	};
+};
+
+&adc_12 {
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+	adc1: adc@0 {
+		/* potentiometer */
+		st,adc-channels = <0>;
+		status = "okay";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0	= <&ethernet_rmii>;
+	pinctrl-names	= "default";
+	phy-mode	= "rmii";
+	phy-handle	= <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	broken-cd;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&v2v9_sd>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h750.dtsi b/roms/u-boot/arch/arm/dts/stm32h750.dtsi
new file mode 100644
index 000000000..99533f356
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h750.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright (C) STMicroelectronics 2021 - All Rights Reserved */
+
+#include "stm32h743.dtsi"
+
diff --git a/roms/u-boot/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
new file mode 100644
index 000000000..326a5533b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <stm32h7-u-boot.dtsi>
+
+&fmc {
+	/*
+	 * Memory configuration from sdram datasheet W9825G6KH
+	 * first bank is bank@0
+	 * second bank is bank@1
+	 */
+	bank1: bank@0 {
+		st,sdram-control = /bits/ 8 <NO_COL_9
+					     NO_ROW_13
+					     MWIDTH_16
+					     BANKS_4
+					     CAS_2
+					     SDCLK_3
+					     RD_BURST_EN
+					     RD_PIPE_DL_0>;
+		st,sdram-timing = /bits/ 8 <TMRD_2
+					    TXSR_6
+					    TRAS_6
+					    TRC_6
+					    TRP_2
+					    TWR_2
+					    TRCD_2>;
+		st,sdram-refcount = <677>;
+	};
+};
+
+&pinctrl {
+	fmc_pins: fmc@0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF12)>,
+				 <STM32_PINMUX('D', 1, AF12)>,
+				 <STM32_PINMUX('D', 8, AF12)>,
+				 <STM32_PINMUX('D', 9, AF12)>,
+				 <STM32_PINMUX('D',10, AF12)>,
+				 <STM32_PINMUX('D',14, AF12)>,
+				 <STM32_PINMUX('D',15, AF12)>,
+
+				 <STM32_PINMUX('E', 0, AF12)>,
+				 <STM32_PINMUX('E', 1, AF12)>,
+				 <STM32_PINMUX('E', 7, AF12)>,
+				 <STM32_PINMUX('E', 8, AF12)>,
+				 <STM32_PINMUX('E', 9, AF12)>,
+				 <STM32_PINMUX('E',10, AF12)>,
+				 <STM32_PINMUX('E',11, AF12)>,
+				 <STM32_PINMUX('E',12, AF12)>,
+				 <STM32_PINMUX('E',13, AF12)>,
+				 <STM32_PINMUX('E',14, AF12)>,
+				 <STM32_PINMUX('E',15, AF12)>,
+
+				 <STM32_PINMUX('F', 0, AF12)>,
+				 <STM32_PINMUX('F', 1, AF12)>,
+				 <STM32_PINMUX('F', 2, AF12)>,
+				 <STM32_PINMUX('F', 3, AF12)>,
+				 <STM32_PINMUX('F', 4, AF12)>,
+				 <STM32_PINMUX('F', 5, AF12)>,
+				 <STM32_PINMUX('F',11, AF12)>,
+				 <STM32_PINMUX('F',12, AF12)>,
+				 <STM32_PINMUX('F',13, AF12)>,
+				 <STM32_PINMUX('F',14, AF12)>,
+				 <STM32_PINMUX('F',15, AF12)>,
+
+				 <STM32_PINMUX('G', 0, AF12)>,
+				 <STM32_PINMUX('G', 1, AF12)>,
+				 <STM32_PINMUX('G', 2, AF12)>,
+				 <STM32_PINMUX('G', 4, AF12)>,
+				 <STM32_PINMUX('G', 5, AF12)>,
+				 <STM32_PINMUX('G', 8, AF12)>,
+				 <STM32_PINMUX('G',15, AF12)>,
+
+				 <STM32_PINMUX('H', 5, AF12)>,
+				 <STM32_PINMUX('C', 2, AF12)>,
+				 <STM32_PINMUX('C', 3, AF12)>;
+
+			slew-rate = <3>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32h750i-art-pi.dts b/roms/u-boot/arch/arm/dts/stm32h750i-art-pi.dts
new file mode 100644
index 000000000..2a4d1cb49
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32h750i-art-pi.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2021 - Dillon Min <dillon.minfei@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "stm32h750.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RT-Thread STM32H750i-ART-PI board";
+	compatible = "st,stm32h750i-art-pi", "st,stm32h750";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:2000000n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x2000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x100000>;
+			linux,dma-default;
+		};
+	};
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-red {
+			gpios = <&gpioi 8 0>;
+		};
+		led-green {
+			gpios = <&gpioc 15 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	wlan_pwr: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0	= <&ethernet_rmii>;
+	pinctrl-names	= "default";
+	phy-mode	= "rmii";
+	phy-handle	= <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	broken-cd;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&wlan_pwr>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;
+	dmas = <&dmamux1 37 0x400 0x05>,
+	       <&dmamux1 38 0x400 0x05>;
+	dma-names = "rx", "tx";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+
+		partition@0 {
+			label = "root filesystem";
+			reg = <0 0x1000000>;
+		};
+	};
+};
+
+&usart2 {
+	pinctrl-0 = <&usart2_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins>;
+	dmas = <&dmamux1 45 0x400 0x05>,
+	       <&dmamux1 46 0x400 0x05>;
+	dma-names = "rx", "tx";
+	st,hw-flow-ctrl;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		host-wakeup-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>;
+		max-speed = <115200>;
+	};
+};
+
+&uart4 {
+	pinctrl-0 = <&uart4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-ddr.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-ddr.dtsi
new file mode 100644
index 000000000..2a139c54e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-ddr.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright : STMicroelectronics 2018
+ */
+#include <linux/stringify.h>
+
+&ddr {
+	config-DDR_MEM_COMPATIBLE {
+		u-boot,dm-pre-reloc;
+
+		compatible = __stringify(st,DDR_MEM_COMPATIBLE);
+
+		st,mem-name = DDR_MEM_NAME;
+		st,mem-speed = <DDR_MEM_SPEED>;
+		st,mem-size = <DDR_MEM_SIZE>;
+
+		st,ctl-reg = <
+			DDR_MSTR
+			DDR_MRCTRL0
+			DDR_MRCTRL1
+			DDR_DERATEEN
+			DDR_DERATEINT
+			DDR_PWRCTL
+			DDR_PWRTMG
+			DDR_HWLPCTL
+			DDR_RFSHCTL0
+			DDR_RFSHCTL3
+			DDR_CRCPARCTL0
+			DDR_ZQCTL0
+			DDR_DFITMG0
+			DDR_DFITMG1
+			DDR_DFILPCFG0
+			DDR_DFIUPD0
+			DDR_DFIUPD1
+			DDR_DFIUPD2
+			DDR_DFIPHYMSTR
+			DDR_ODTMAP
+			DDR_DBG0
+			DDR_DBG1
+			DDR_DBGCMD
+			DDR_POISONCFG
+			DDR_PCCFG
+		>;
+
+		st,ctl-timing = <
+			DDR_RFSHTMG
+			DDR_DRAMTMG0
+			DDR_DRAMTMG1
+			DDR_DRAMTMG2
+			DDR_DRAMTMG3
+			DDR_DRAMTMG4
+			DDR_DRAMTMG5
+			DDR_DRAMTMG6
+			DDR_DRAMTMG7
+			DDR_DRAMTMG8
+			DDR_DRAMTMG14
+			DDR_ODTCFG
+		>;
+
+		st,ctl-map = <
+			DDR_ADDRMAP1
+			DDR_ADDRMAP2
+			DDR_ADDRMAP3
+			DDR_ADDRMAP4
+			DDR_ADDRMAP5
+			DDR_ADDRMAP6
+			DDR_ADDRMAP9
+			DDR_ADDRMAP10
+			DDR_ADDRMAP11
+		>;
+
+		st,ctl-perf = <
+			DDR_SCHED
+			DDR_SCHED1
+			DDR_PERFHPR1
+			DDR_PERFLPR1
+			DDR_PERFWR1
+			DDR_PCFGR_0
+			DDR_PCFGW_0
+			DDR_PCFGQOS0_0
+			DDR_PCFGQOS1_0
+			DDR_PCFGWQOS0_0
+			DDR_PCFGWQOS1_0
+			DDR_PCFGR_1
+			DDR_PCFGW_1
+			DDR_PCFGQOS0_1
+			DDR_PCFGQOS1_1
+			DDR_PCFGWQOS0_1
+			DDR_PCFGWQOS1_1
+		>;
+
+		st,phy-reg = <
+			DDR_PGCR
+			DDR_ACIOCR
+			DDR_DXCCR
+			DDR_DSGCR
+			DDR_DCR
+			DDR_ODTCR
+			DDR_ZQ0CR1
+			DDR_DX0GCR
+			DDR_DX1GCR
+			DDR_DX2GCR
+			DDR_DX3GCR
+		>;
+
+		st,phy-timing = <
+			DDR_PTR0
+			DDR_PTR1
+			DDR_PTR2
+			DDR_DTPR0
+			DDR_DTPR1
+			DDR_DTPR2
+			DDR_MR0
+			DDR_MR1
+			DDR_MR2
+			DDR_MR3
+		>;
+
+#ifdef DDR_PHY_CAL_SKIP
+		st,phy-cal = <
+			DDR_DX0DLLCR
+			DDR_DX0DQTR
+			DDR_DX0DQSTR
+			DDR_DX1DLLCR
+			DDR_DX1DQTR
+			DDR_DX1DQSTR
+			DDR_DX2DLLCR
+			DDR_DX2DQTR
+			DDR_DX2DQSTR
+			DDR_DX3DLLCR
+			DDR_DX3DQTR
+			DDR_DX3DQSTR
+		>;
+
+#endif
+
+		status = "okay";
+	};
+};
+
+#undef DDR_MEM_COMPATIBLE
+#undef DDR_MEM_NAME
+#undef DDR_MEM_SPEED
+#undef DDR_MEM_SIZE
+
+#undef DDR_MSTR
+#undef DDR_MRCTRL0
+#undef DDR_MRCTRL1
+#undef DDR_DERATEEN
+#undef DDR_DERATEINT
+#undef DDR_PWRCTL
+#undef DDR_PWRTMG
+#undef DDR_HWLPCTL
+#undef DDR_RFSHCTL0
+#undef DDR_RFSHCTL3
+#undef DDR_RFSHTMG
+#undef DDR_CRCPARCTL0
+#undef DDR_DRAMTMG0
+#undef DDR_DRAMTMG1
+#undef DDR_DRAMTMG2
+#undef DDR_DRAMTMG3
+#undef DDR_DRAMTMG4
+#undef DDR_DRAMTMG5
+#undef DDR_DRAMTMG6
+#undef DDR_DRAMTMG7
+#undef DDR_DRAMTMG8
+#undef DDR_DRAMTMG14
+#undef DDR_ZQCTL0
+#undef DDR_DFITMG0
+#undef DDR_DFITMG1
+#undef DDR_DFILPCFG0
+#undef DDR_DFIUPD0
+#undef DDR_DFIUPD1
+#undef DDR_DFIUPD2
+#undef DDR_DFIPHYMSTR
+#undef DDR_ADDRMAP1
+#undef DDR_ADDRMAP2
+#undef DDR_ADDRMAP3
+#undef DDR_ADDRMAP4
+#undef DDR_ADDRMAP5
+#undef DDR_ADDRMAP6
+#undef DDR_ADDRMAP9
+#undef DDR_ADDRMAP10
+#undef DDR_ADDRMAP11
+#undef DDR_ODTCFG
+#undef DDR_ODTMAP
+#undef DDR_SCHED
+#undef DDR_SCHED1
+#undef DDR_PERFHPR1
+#undef DDR_PERFLPR1
+#undef DDR_PERFWR1
+#undef DDR_DBG0
+#undef DDR_DBG1
+#undef DDR_DBGCMD
+#undef DDR_POISONCFG
+#undef DDR_PCCFG
+#undef DDR_PCFGR_0
+#undef DDR_PCFGW_0
+#undef DDR_PCFGQOS0_0
+#undef DDR_PCFGQOS1_0
+#undef DDR_PCFGWQOS0_0
+#undef DDR_PCFGWQOS1_0
+#undef DDR_PCFGR_1
+#undef DDR_PCFGW_1
+#undef DDR_PCFGQOS0_1
+#undef DDR_PCFGQOS1_1
+#undef DDR_PCFGWQOS0_1
+#undef DDR_PCFGWQOS1_1
+#undef DDR_PGCR
+#undef DDR_PTR0
+#undef DDR_PTR1
+#undef DDR_PTR2
+#undef DDR_ACIOCR
+#undef DDR_DXCCR
+#undef DDR_DSGCR
+#undef DDR_DCR
+#undef DDR_DTPR0
+#undef DDR_DTPR1
+#undef DDR_DTPR2
+#undef DDR_MR0
+#undef DDR_MR1
+#undef DDR_MR2
+#undef DDR_MR3
+#undef DDR_ODTCR
+#undef DDR_ZQ0CR1
+#undef DDR_DX0GCR
+#undef DDR_DX0DLLCR
+#undef DDR_DX0DQTR
+#undef DDR_DX0DQSTR
+#undef DDR_DX1GCR
+#undef DDR_DX1DLLCR
+#undef DDR_DX1DQTR
+#undef DDR_DX1DQSTR
+#undef DDR_DX2GCR
+#undef DDR_DX2DLLCR
+#undef DDR_DX2DQTR
+#undef DDR_DX2DQSTR
+#undef DDR_DX3GCR
+#undef DDR_DX3DLLCR
+#undef DDR_DX3DQTR
+#undef DDR_DX3DQSTR
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
new file mode 100644
index 000000000..978331b27
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 16bits
+ * DDR density: 4Gb
+ * System frequency: 533000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
+ *
+ * Save Date: 2020.02.20, save Time: 18:45:20
+ */
+#define DDR_MEM_COMPATIBLE ddr3-1066-888-bin-g-1x4gb-533mhz
+#define DDR_MEM_NAME	"DDR3-DDR3L 16bits 533000kHz"
+#define DDR_MEM_SPEED	533000
+#define DDR_MEM_SIZE	0x20000000
+
+#define DDR_MSTR 0x00041401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00070707
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x1F000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x06060606
+#define DDR_ADDRMAP6 0x0F060606
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE80
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE80
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
new file mode 100644
index 000000000..426be21f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 32bits
+ * DDR density: 8Gb
+ * System frequency: 533000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
+ *
+ * Save Date: 2020.02.20, save Time: 18:49:33
+ */
+#define DDR_MEM_COMPATIBLE ddr3-1066-888-bin-g-2x4gb-533mhz
+#define DDR_MEM_NAME	"DDR3-DDR3L 32bits 533000kHz"
+#define DDR_MEM_SPEED	533000
+#define DDR_MEM_SIZE	0x40000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi
new file mode 100644
index 000000000..b3eb280f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, DH electronics - All Rights Reserved
+ *
+ * STM32MP15xx DHSOM configuration
+ * 2x DDR3L 1Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
+ * Reference used W631GU6MB15I from Winbond
+ *
+ * DDR type / Platform	DDR3/3L
+ * freq		533MHz
+ * width	32
+ * datasheet	0  = W631GU6MB15I / DDR3-1333
+ * DDR density	2
+ * timing mode	optimized
+ * address mapping : RBC
+ * Tc > + 85C : J
+ */
+#define DDR_MEM_COMPATIBLE ddr3l-dhsom-1066-888-bin-g-2x1gb-533mhz
+#define DDR_MEM_NAME "DDR3L 32bits 2x1Gb 533MHz"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x10000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0040008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B1214
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F0F0F07
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000248
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi
new file mode 100644
index 000000000..ed3a5248f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, DH electronics - All Rights Reserved
+ *
+ * STM32MP15xx DHSOM configuration
+ * 2x DDR3L 2Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
+ * Reference used W632GU6NB15I from Winbond
+ *
+ * DDR type / Platform	DDR3/3L
+ * freq		533MHz
+ * width	32
+ * datasheet	0  = W632GU6NB15I / DDR3-1333
+ * DDR density	4
+ * timing mode	optimized
+ * address mapping : RBC
+ * Tc > + 85C : J
+ */
+#define DDR_MEM_COMPATIBLE ddr3l-dhsom-1066-888-bin-g-2x2gb-533mhz
+#define DDR_MEM_NAME "DDR3L 32bits 2x2Gb 533MHz"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x20000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0040008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B1214
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F0F0707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000248
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi
new file mode 100644
index 000000000..d5813d64b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, DH electronics - All Rights Reserved
+ *
+ * STM32MP15xx DHSOM configuration
+ * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
+ * Reference used W634GU6NB15I from Winbond
+ *
+ * DDR type / Platform	DDR3/3L
+ * freq		533MHz
+ * width	32
+ * datasheet	0  = W634GU6NB15I / DDR3-1333
+ * DDR density	8
+ * timing mode	optimized
+ * address mapping : RBC
+ * Tc > + 85C : J
+ */
+#define DDR_MEM_COMPATIBLE ddr3l-dhsom-1066-888-bin-g-2x4gb-533mhz
+#define DDR_MEM_NAME "DDR3L 32bits 2x4Gb 533MHz"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x40000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0040008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B1214
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000248
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
new file mode 100644
index 000000000..24c81269b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2015-2018, STMicroelectronics - All Rights Reserved
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 32bits
+ * DDR density: 4Gb
+ * System frequency: 528000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
+ *
+ * Save Date: 2019.05.14, save Time: 11:25:16
+ */
+#define DDR_MEM_COMPATIBLE ddr3-icore-1066-888-bin-g-1x4gb-528mhz
+#define DDR_MEM_NAME	"DDR3-DDR3L 32bits 528000kHz"
+#define DDR_MEM_SPEED	528000
+#define DDR_MEM_SIZE	0x20000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0080008A
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041B
+#define DDR_DRAMTMG2 0x0607080F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x07040607
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02050105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F0F0707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022A41B
+#define DDR_PTR1 0x047C0740
+#define DDR_PTR2 0x042D9C80
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200001F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x36D477D0
+#define DDR_DTPR1 0x098A00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000830
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-pinctrl.dtsi
new file mode 100644
index 000000000..20a59e8f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,2035 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	adc1_in6_pins_a: adc1-in6-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
+		};
+	};
+
+	adc12_ain_pins_a: adc12-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+				 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+				 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+		};
+	};
+
+	adc12_ain_pins_b: adc12-ain-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC2 in2 */
+		};
+	};
+
+	adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+				 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+		};
+	};
+
+	cec_pins_a: cec-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, AF4)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	cec_sleep_pins_a: cec-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	cec_pins_b: cec-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF5)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	cec_sleep_pins_b: cec-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	dac_ch1_pins_a: dac-ch1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+		};
+	};
+
+	dac_ch2_pins_a: dac-ch2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+		};
+	};
+
+	dcmi_pins_a: dcmi-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+			bias-disable;
+		};
+	};
+
+	dcmi_sleep_pins_a: dcmi-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+		};
+	};
+
+	ethernet0_rgmii_pins_a: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	ethernet0_rgmii_pins_b: rgmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_b: rgmii-sleep-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		 };
+	};
+
+	ethernet0_rgmii_pins_c: rgmii-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_c: rgmii-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	ethernet0_rmii_pins_a: rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF0)>,   /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rmii_sleep_pins_a: rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
+	fmc_pins_a: fmc-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+			bias-pull-up;
+		};
+	};
+
+	fmc_sleep_pins_a: fmc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+				 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+		};
+	};
+
+	fmc_pins_b: fmc-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */
+				 <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */
+				 <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */
+				 <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */
+				 <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */
+				 <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */
+				 <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */
+				 <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	fmc_sleep_pins_b: fmc-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+				 <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */
+				 <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */
+				 <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */
+				 <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */
+				 <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */
+				 <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */
+		};
+	};
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c1_pins_b: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_sleep_pins_b: i2c1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c2_pins_a: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_sleep_pins_a: i2c2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c2_pins_b1: i2c2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_sleep_pins_b1: i2c2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c2_pins_c: i2c2-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 1, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_c: i2c2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 1, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+		};
+	};
+
+	i2c5_pins_b: i2c5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_b: i2c5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
+	i2s2_pins_a: i2s2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	i2s2_sleep_pins_a: i2s2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
+	ltdc_pins_a: ltdc-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_sleep_pins_a: ltdc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	ltdc_pins_b: ltdc-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_sleep_pins_b: ltdc-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	ltdc_pins_c: ltdc-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B',  1, AF9)>,  /* LTDC_R6 */
+				 <STM32_PINMUX('B',  9, AF14)>, /* LTDC_B7 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LTDC_R5 */
+				 <STM32_PINMUX('D',  3, AF14)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D',  6, AF14)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+				 <STM32_PINMUX('H',  4, AF9)>,  /* LTDC_G5 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I',  5, AF14)>, /* LTDC_B5 */
+				 <STM32_PINMUX('I',  6, AF14)>, /* LTDC_B6 */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_sleep_pins_c: ltdc-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 1, ANALOG)>,  /* LTDC_R6 */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* LTDC_B7 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* LTDC_R5 */
+				 <STM32_PINMUX('D', 3, ANALOG)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* LTDC_G3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LTDC_B4 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LTDC_DE */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LTDC_R7 */
+				 <STM32_PINMUX('H', 4, ANALOG)>,  /* LTDC_G5 */
+				 <STM32_PINMUX('H', 8, ANALOG)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H', 9, ANALOG)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I', 1, ANALOG)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I', 5, ANALOG)>, /* LTDC_B5 */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* LTDC_B6 */
+				 <STM32_PINMUX('I', 9, ANALOG)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LTDC_HSYNC */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* LTDC_CLK */
+		};
+	};
+
+	ltdc_pins_d: ltdc-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>; /* LCD_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('A',  5, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('B',  0, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('H',  4,  AF9)>, /* LCD_G5 */
+				 <STM32_PINMUX('I', 11,  AF9)>, /* LCD_G6 */
+				 <STM32_PINMUX('G',  8, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('I',  7, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	ltdc_sleep_pins_d: ltdc-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('A',  5, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('B',  0, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('H',  4, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('G',  8, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('I',  7, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	m_can1_pins_a: m-can1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_a: m_can1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	m_can1_pins_b: m-can1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_b: m_can1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('A', 11, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	m_can2_pins_a: m-can2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+			bias-disable;
+		};
+	};
+
+	m_can2_sleep_pins_a: m_can2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* CAN2_TX */
+				 <STM32_PINMUX('B', 5, ANALOG)>; /* CAN2_RX */
+		};
+	};
+
+	pwm1_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
+		};
+	};
+
+	pwm2_pins_a: pwm2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm2_sleep_pins_a: pwm2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
+		};
+	};
+
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm3_pins_b: pwm3-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_b: pwm3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+		};
+	};
+
+	pwm4_pins_b: pwm4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_b: pwm4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+		};
+	};
+
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
+		};
+	};
+
+	pwm5_pins_b: pwm5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
+				 <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
+				 <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_sleep_pins_b: pwm5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>, /* TIM5_CH2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* TIM5_CH3 */
+				 <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+		};
+	};
+
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	pwm12_pins_a: pwm12-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm12_sleep_pins_a: pwm12-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
+		};
+	};
+
+	qspi_clk_pins_a: qspi-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	qspi_bk1_pins_a: qspi-bk1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_bk2_pins_a: qspi-bk2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+		};
+	};
+
+	sai2a_pins_a: sai2a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_a: sai2a-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+		};
+	};
+
+	sai2a_pins_b: sai2a-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>,	/* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, AF10)>;	/* SAI2_SCK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_b: sai2a-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 6, ANALOG)>,  /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>,  /* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */
+		};
+	};
+
+	sai2a_pins_c: sai2a-4 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('D', 12, AF10)>; /* SAI2_FS_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_c: sai2a-5 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('D', 12, ANALOG)>; /* SAI2_FS_A */
+		};
+	};
+
+	sai2b_pins_a: sai2b-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_a: sai2b-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+		};
+	};
+
+	sai2b_pins_b: sai2b-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_b: sai2b-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	sai2b_pins_c: sai2a-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_c: sai2a-sleep-5 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	sai4a_pins_a: sai4a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai4a_sleep_pins_a: sai4a-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_pins_b: sdmmc2-d47-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>,  /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_pins_c: sdmmc2-d47-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_c: sdmmc2-d47-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_pins_d: sdmmc2-d47-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc3_b4_pins_a: sdmmc3-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	sdmmc3_b4_pins_b: sdmmc3-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_od_pins_b: sdmmc3-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_sleep_pins_b: sdmmc3-b4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	spdifrx_pins_a: spdifrx-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+			bias-disable;
+		};
+	};
+
+	spdifrx_sleep_pins_a: spdifrx-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+		};
+	};
+
+	spi2_pins_a: spi2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	spi4_pins_a: spi4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+			bias-disable;
+		};
+	};
+
+	stusb1600_pins_a: stusb1600-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+			bias-pull-up;
+		};
+	};
+
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_idle_pins_a: uart4-idle-0 {
+		   pins1 {
+			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		   };
+		   pins2 {
+			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			 bias-disable;
+		   };
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		   pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		    };
+	};
+
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_pins_c: uart4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_b: uart7-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_c: uart7-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_idle_pins_c: uart7-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_sleep_pins_c: uart7-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('E', 7, ANALOG)>; /* UART7_RX */
+		};
+	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	uart8_rtscts_pins_a: uart8rtscts-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, AF8)>, /* UART8_RTS */
+				 <STM32_PINMUX('G', 10, AF8)>; /* UART8_CTS */
+			bias-disable;
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart2_pins_b: usart2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_b: usart2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart2_pins_c: usart2-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_c: usart2-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_c: usart2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart3_pins_a: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_pins_b: usart3-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_idle_pins_b: usart3-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_b: usart3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	usart3_pins_c: usart3-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_idle_pins_c: usart3-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_c: usart3-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	usbotg_hs_pins_a: usbotg-hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
+		};
+	};
+
+	usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
+		};
+	};
+};
+
+&pinctrl_z {
+	i2c2_pins_b2: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_sleep_pins_b2: i2c2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+		};
+	};
+
+	i2c4_pins_a: i2c4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c4_sleep_pins_a: i2c4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+		};
+	};
+
+	spi1_pins_a: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15-u-boot.dtsi
new file mode 100644
index 000000000..43a790997
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright : STMicroelectronics 2018
+ */
+
+/ {
+	aliases {
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+		gpio25 = &gpioz;
+		pinctrl0 = &pinctrl;
+		pinctrl1 = &pinctrl_z;
+	};
+
+	clocks {
+		u-boot,dm-pre-reloc;
+	};
+
+	/* need PSCI for sysreset during board_f */
+	psci {
+		u-boot,dm-pre-proper;
+	};
+
+	reboot {
+		u-boot,dm-pre-reloc;
+		compatible = "syscon-reboot";
+		regmap = <&rcc>;
+		offset = <0x404>;
+		mask = <0x1>;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+
+		ddr: ddr@5a003000 {
+			u-boot,dm-pre-reloc;
+
+			compatible = "st,stm32mp1-ddr";
+
+			reg = <0x5A003000 0x550
+			       0x5A004000 0x234>;
+
+			clocks = <&rcc AXIDCG>,
+				 <&rcc DDRC1>,
+				 <&rcc DDRC2>,
+				 <&rcc DDRPHYC>,
+				 <&rcc DDRCAPB>,
+				 <&rcc DDRPHYCAPB>;
+
+			clock-names = "axidcg",
+				      "ddrc1",
+				      "ddrc2",
+				      "ddrphyc",
+				      "ddrcapb",
+				      "ddrphycapb";
+
+			status = "okay";
+		};
+	};
+};
+
+&bsec {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_csi {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_hsi {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_hse {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_lsi {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_lse {
+	u-boot,dm-pre-reloc;
+};
+
+&cpu0_opp_table {
+	u-boot,dm-spl;
+	opp-650000000 {
+		u-boot,dm-spl;
+	};
+	opp-800000000 {
+		u-boot,dm-spl;
+	};
+};
+
+&gpioa {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiob {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiod {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioe {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiof {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiog {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioh {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioi {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioj {
+	u-boot,dm-pre-reloc;
+};
+
+&gpiok {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioz {
+	u-boot,dm-pre-reloc;
+};
+
+&iwdg2 {
+	u-boot,dm-pre-reloc;
+};
+
+/* pre-reloc probe = reserve video frame buffer in video_reserve() */
+&ltdc {
+	u-boot,dm-pre-proper;
+};
+
+/* temp = waiting kernel update */
+&m4_rproc {
+	resets = <&rcc MCU_R>,
+		 <&rcc MCU_HOLD_BOOT_R>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_z {
+	u-boot,dm-pre-reloc;
+};
+
+&pwr_regulators {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	u-boot,dm-pre-reloc;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&sdmmc1 {
+	compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+};
+
+&sdmmc2 {
+	compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+};
+
+&sdmmc3 {
+	compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+};
+
+&usart1 {
+	resets = <&rcc USART1_R>;
+};
+
+&usart2 {
+	resets = <&rcc USART2_R>;
+};
+
+&usart3 {
+	resets = <&rcc USART3_R>;
+};
+
+&uart4 {
+	resets = <&rcc UART4_R>;
+};
+
+&uart5 {
+	resets = <&rcc UART5_R>;
+};
+
+&usart6 {
+	resets = <&rcc USART6_R>;
+};
+
+&uart7 {
+	resets = <&rcc UART7_R>;
+};
+
+&uart8{
+	resets = <&rcc UART8_R>;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/stm32mp151.dtsi b/roms/u-boot/arch/arm/dts/stm32mp151.dtsi
new file mode 100644
index 000000000..b564fc626
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp151.dtsi
@@ -0,0 +1,1799 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
+			device_type = "cpu";
+			reg = <0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			nvmem-cells = <&part_number_otp>;
+			nvmem-cell-names = "part_number";
+		};
+	};
+
+	cpu0_opp_table: cpu0-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-650000000 {
+			opp-hz = /bits/ 64 <650000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0x1>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1350000>;
+			opp-supported-hw = <0x2>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		clk_hsi: clk-hsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <64000000>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_lsi: clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_csi: clk-csi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <4000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&dts>;
+
+			trips {
+				cpu_alert1: cpu-alert1 {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	booster: regulator-booster {
+		compatible = "st,stm32mp1-booster";
+		st,syscfg = <&syscfg>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		timers2: timer@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			clocks = <&rcc TIM2_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 18 0x400 0x1>,
+			       <&dmamux1 19 0x400 0x1>,
+			       <&dmamux1 20 0x400 0x1>,
+			       <&dmamux1 21 0x400 0x1>,
+			       <&dmamux1 22 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers3: timer@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			clocks = <&rcc TIM3_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 23 0x400 0x1>,
+			       <&dmamux1 24 0x400 0x1>,
+			       <&dmamux1 25 0x400 0x1>,
+			       <&dmamux1 26 0x400 0x1>,
+			       <&dmamux1 27 0x400 0x1>,
+			       <&dmamux1 28 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers4: timer@40002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			clocks = <&rcc TIM4_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 29 0x400 0x1>,
+			       <&dmamux1 30 0x400 0x1>,
+			       <&dmamux1 31 0x400 0x1>,
+			       <&dmamux1 32 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers5: timer@40003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40003000 0x400>;
+			clocks = <&rcc TIM5_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 55 0x400 0x1>,
+			       <&dmamux1 56 0x400 0x1>,
+			       <&dmamux1 57 0x400 0x1>,
+			       <&dmamux1 58 0x400 0x1>,
+			       <&dmamux1 59 0x400 0x1>,
+			       <&dmamux1 60 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers6: timer@40004000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40004000 0x400>;
+			clocks = <&rcc TIM6_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 69 0x400 0x1>;
+			dma-names = "up";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timers7: timer@40005000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40005000 0x400>;
+			clocks = <&rcc TIM7_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 70 0x400 0x1>;
+			dma-names = "up";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		timers12: timer@40006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40006000 0x400>;
+			clocks = <&rcc TIM12_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timer@40007000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40007000 0x400>;
+			clocks = <&rcc TIM13_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@12 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <12>;
+				status = "disabled";
+			};
+		};
+
+		timers14: timer@40008000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40008000 0x400>;
+			clocks = <&rcc TIM14_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@13 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <13>;
+				status = "disabled";
+			};
+		};
+
+		lptimer1: timer@40009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40009000 0x400>;
+			interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM1_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@4000b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			dmas = <&dmamux1 39 0x400 0x05>,
+			       <&dmamux1 40 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s2: audio-controller@4000b000 {
+			compatible = "st,stm32h7-i2s";
+			#sound-dai-cells = <0>;
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi@4000c000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			dmas = <&dmamux1 61 0x400 0x05>,
+			       <&dmamux1 62 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s3: audio-controller@4000c000 {
+			compatible = "st,stm32h7-i2s";
+			#sound-dai-cells = <0>;
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spdifrx: audio-controller@4000d000 {
+			compatible = "st,stm32h7-spdifrx";
+			#sound-dai-cells = <0>;
+			reg = <0x4000d000 0x400>;
+			clocks = <&rcc SPDIF_K>;
+			clock-names = "kclk";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 93 0x400 0x01>,
+			       <&dmamux1 94 0x400 0x01>;
+			dma-names = "rx", "rx-ctrl";
+			status = "disabled";
+		};
+
+		usart2: serial@4000e000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000e000 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART2_K>;
+			status = "disabled";
+		};
+
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			status = "disabled";
+		};
+
+		uart4: serial@40010000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40010000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART4_K>;
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40012000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x40012000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C1_K>;
+			resets = <&rcc I2C1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x1>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40013000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x40013000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C2_K>;
+			resets = <&rcc I2C2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40014000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x40014000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C3_K>;
+			resets = <&rcc I2C3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x4>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		i2c5: i2c@40015000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x40015000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C5_K>;
+			resets = <&rcc I2C5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x10>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		cec: cec@40016000 {
+			compatible = "st,stm32-cec";
+			reg = <0x40016000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clock-names = "cec", "hdmi-cec";
+			status = "disabled";
+		};
+
+		dac: dac@40017000 {
+			compatible = "st,stm32h7-dac-core";
+			reg = <0x40017000 0x400>;
+			clocks = <&rcc DAC12>;
+			clock-names = "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dac1: dac@1 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				status = "disabled";
+			};
+
+			dac2: dac@2 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			status = "disabled";
+		};
+
+		timers1: timer@44000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44000000 0x400>;
+			clocks = <&rcc TIM1_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 11 0x400 0x1>,
+			       <&dmamux1 12 0x400 0x1>,
+			       <&dmamux1 13 0x400 0x1>,
+			       <&dmamux1 14 0x400 0x1>,
+			       <&dmamux1 15 0x400 0x1>,
+			       <&dmamux1 16 0x400 0x1>,
+			       <&dmamux1 17 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4",
+				    "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers8: timer@44001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44001000 0x400>;
+			clocks = <&rcc TIM8_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 47 0x400 0x1>,
+			       <&dmamux1 48 0x400 0x1>,
+			       <&dmamux1 49 0x400 0x1>,
+			       <&dmamux1 50 0x400 0x1>,
+			       <&dmamux1 51 0x400 0x1>,
+			       <&dmamux1 52 0x400 0x1>,
+			       <&dmamux1 53 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4",
+				    "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			status = "disabled";
+		};
+
+		spi1: spi@44004000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			dmas = <&dmamux1 37 0x400 0x05>,
+			       <&dmamux1 38 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: audio-controller@44004000 {
+			compatible = "st,stm32h7-i2s";
+			#sound-dai-cells = <0>;
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi4: spi@44005000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44005000 0x400>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI4_K>;
+			resets = <&rcc SPI4_R>;
+			dmas = <&dmamux1 83 0x400 0x05>,
+			       <&dmamux1 84 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		timers15: timer@44006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44006000 0x400>;
+			clocks = <&rcc TIM15_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 105 0x400 0x1>,
+			       <&dmamux1 106 0x400 0x1>,
+			       <&dmamux1 107 0x400 0x1>,
+			       <&dmamux1 108 0x400 0x1>;
+			dma-names = "ch1", "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@14 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <14>;
+				status = "disabled";
+			};
+		};
+
+		timers16: timer@44007000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44007000 0x400>;
+			clocks = <&rcc TIM16_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 109 0x400 0x1>,
+			       <&dmamux1 110 0x400 0x1>;
+			dma-names = "ch1", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+			timer@15 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <15>;
+				status = "disabled";
+			};
+		};
+
+		timers17: timer@44008000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44008000 0x400>;
+			clocks = <&rcc TIM17_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 111 0x400 0x1>,
+			       <&dmamux1 112 0x400 0x1>;
+			dma-names = "ch1", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@16 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <16>;
+				status = "disabled";
+			};
+		};
+
+		spi5: spi@44009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44009000 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI5_K>;
+			resets = <&rcc SPI5_R>;
+			dmas = <&dmamux1 85 0x400 0x05>,
+			       <&dmamux1 86 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sai1: sai@4400a000 {
+			compatible = "st,stm32h7-sai";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4400a000 0x400>;
+			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI1_R>;
+			status = "disabled";
+
+			sai1a: audio-controller@4400a004 {
+				#sound-dai-cells = <0>;
+
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x4 0x1c>;
+				clocks = <&rcc SAI1_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 87 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai1b: audio-controller@4400a024 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x1c>;
+				clocks = <&rcc SAI1_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 88 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		sai2: sai@4400b000 {
+			compatible = "st,stm32h7-sai";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4400b000 0x400>;
+			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI2_R>;
+			status = "disabled";
+
+			sai2a: audio-controller@4400b004 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x4 0x1c>;
+				clocks = <&rcc SAI2_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 89 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai2b: audio-controller@4400b024 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x1c>;
+				clocks = <&rcc SAI2_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 90 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		sai3: sai@4400c000 {
+			compatible = "st,stm32h7-sai";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4400c000 0x400>;
+			reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI3_R>;
+			status = "disabled";
+
+			sai3a: audio-controller@4400c004 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x04 0x1c>;
+				clocks = <&rcc SAI3_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 113 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai3b: audio-controller@4400c024 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x1c>;
+				clocks = <&rcc SAI3_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 114 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		dfsdm: dfsdm@4400d000 {
+			compatible = "st,stm32mp1-dfsdm";
+			reg = <0x4400d000 0x800>;
+			clocks = <&rcc DFSDM_K>;
+			clock-names = "dfsdm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dfsdm0: filter@0 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <0>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 101 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm1: filter@1 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 102 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm2: filter@2 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 103 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm3: filter@3 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <3>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 104 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm4: filter@4 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <4>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 91 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm5: filter@5 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <5>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 92 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		dma1: dma-controller@48000000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48000000 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dma2: dma-controller@48001000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48001000 0x400>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dmamux1: dma-router@48002000 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x48002000 0x40>;
+			#dma-cells = <3>;
+			dma-requests = <128>;
+			dma-masters = <&dma1 &dma2>;
+			dma-channels = <16>;
+			clocks = <&rcc DMAMUX>;
+			resets = <&rcc DMAMUX_R>;
+		};
+
+		adc: adc@48003000 {
+			compatible = "st,stm32mp1-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			st,syscfg = <&syscfg>;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				dmas = <&dmamux1 9 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				dmas = <&dmamux1 10 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		sdmmc3: sdmmc@48004000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x48004000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC3_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC3_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		usbotg_hs: usb-otg@49000000 {
+			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+			reg = <0x49000000 0x10000>;
+			clocks = <&rcc USBO_K>;
+			clock-names = "otg";
+			resets = <&rcc USBO_R>;
+			reset-names = "dwc2";
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+			dr_mode = "otg";
+			usb33d-supply = <&usb33>;
+			status = "disabled";
+		};
+
+		hwspinlock: hwspinlock@4c000000 {
+			compatible = "st,stm32-hwspinlock";
+			#hwlock-cells = <1>;
+			reg = <0x4c000000 0x400>;
+			clocks = <&rcc HSEM>;
+			clock-names = "hwspinlock";
+		};
+
+		ipcc: mailbox@4c001000 {
+			compatible = "st,stm32mp1-ipcc";
+			#mbox-cells = <1>;
+			reg = <0x4c001000 0x400>;
+			st,proc-id = <0>;
+			interrupts-extended =
+				<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				<&exti 61 1>;
+			interrupt-names = "rx", "tx", "wakeup";
+			clocks = <&rcc IPCC>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		dcmi: dcmi@4c006000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x4c006000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc CAMITF_R>;
+			clocks = <&rcc DCMI>;
+			clock-names = "mclk";
+			dmas = <&dmamux1 75 0x400 0x01>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp1-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clock-names = "hse", "hsi", "csi", "lse", "lsi";
+			clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
+				 <&clk_lse>, <&clk_lsi>;
+		};
+
+		pwr_regulators: pwr@50001000 {
+			compatible = "st,stm32mp1,pwr-reg";
+			reg = <0x50001000 0x10>;
+
+			reg11: reg11 {
+				regulator-name = "reg11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			reg18: reg18 {
+				regulator-name = "reg18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			usb33: usb33 {
+				regulator-name = "usb33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+
+		pwr_mcu: pwr_mcu@50001014 {
+			compatible = "st,stm32mp151-pwr-mcu", "syscon";
+			reg = <0x50001014 0x4>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+		};
+
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
+		};
+
+		lptimer2: timer@50021000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x50021000 0x400>;
+			interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM2_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@1 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		lptimer3: timer@50022000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x50022000 0x400>;
+			interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM3_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@2 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		lptimer4: timer@50023000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x50023000 0x400>;
+			interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM4_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		lptimer5: timer@50024000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x50024000 0x400>;
+			interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM5_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		vrefbuf: vrefbuf@50025000 {
+			compatible = "st,stm32-vrefbuf";
+			reg = <0x50025000 0x8>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <2500000>;
+			clocks = <&rcc VREF>;
+			status = "disabled";
+		};
+
+		sai4: sai@50027000 {
+			compatible = "st,stm32h7-sai";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50027000 0x400>;
+			reg = <0x50027000 0x4>, <0x500273f0 0x10>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI4_R>;
+			status = "disabled";
+
+			sai4a: audio-controller@50027004 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x04 0x1c>;
+				clocks = <&rcc SAI4_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 99 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai4b: audio-controller@50027024 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x1c>;
+				clocks = <&rcc SAI4_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 100 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		dts: thermal@50028000 {
+			compatible = "st,stm32-thermal";
+			reg = <0x50028000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc TMPSENS>;
+			clock-names = "pclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		hash1: hash@54002000 {
+			compatible = "st,stm32f756-hash";
+			reg = <0x54002000 0x400>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc HASH1>;
+			resets = <&rcc HASH1_R>;
+			dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
+			dma-names = "in";
+			dma-maxburst = <2>;
+			status = "disabled";
+		};
+
+		rng1: rng@54003000 {
+			compatible = "st,stm32-rng";
+			reg = <0x54003000 0x400>;
+			clocks = <&rcc RNG1_K>;
+			resets = <&rcc RNG1_R>;
+			status = "disabled";
+		};
+
+		mdma1: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc MDMA>;
+			resets = <&rcc MDMA_R>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
+		};
+
+		fmc: memory-controller@58002000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp1-fmc2-ebi";
+			reg = <0x58002000 0x1000>;
+			clocks = <&rcc FMC_K>;
+			resets = <&rcc FMC_R>;
+			status = "disabled";
+
+			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+				 <4 0 0x80000000 0x10000000>; /* NAND */
+
+			nand-controller@4,0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp1-fmc2-nfc";
+				reg = <4 0x00000000 0x1000>,
+				      <4 0x08010000 0x1000>,
+				      <4 0x08020000 0x1000>,
+				      <4 0x01000000 0x1000>,
+				      <4 0x09010000 0x1000>,
+				      <4 0x09020000 0x1000>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+				       <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+				       <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+				dma-names = "tx", "rx", "ecc";
+				status = "disabled";
+			};
+		};
+
+		qspi: spi@58003000 {
+			compatible = "st,stm32f469-qspi";
+			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+			reg-names = "qspi", "qspi_mm";
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
+			       <&mdma1 22 0x2 0x100008 0x0 0x0>;
+			dma-names = "tx", "rx";
+			clocks = <&rcc QSPI_K>;
+			resets = <&rcc QSPI_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdmmc@58005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x58005000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: sdmmc@58007000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x58007000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		crc1: crc@58009000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x58009000 0x400>;
+			clocks = <&rcc CRC1>;
+			status = "disabled";
+		};
+
+		stmmac_axi_config_0: stmmac-axi-config {
+			snps,wr_osr_lmt = <0x7>;
+			snps,rd_osr_lmt = <0x7>;
+			snps,blen = <0 0 0 0 16 8 4>;
+		};
+
+		ethernet0: ethernet@5800a000 {
+			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+			reg = <0x5800a000 0x2000>;
+			reg-names = "stmmaceth";
+			interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth",
+				      "mac-clk-tx",
+				      "mac-clk-rx",
+				      "eth-ck",
+				      "ethstp";
+			clocks = <&rcc ETHMAC>,
+				 <&rcc ETHTX>,
+				 <&rcc ETHRX>,
+				 <&rcc ETHCK_K>,
+				 <&rcc ETHSTP>;
+			st,syscon = <&syscfg 0x4>;
+			snps,mixed-burst;
+			snps,pbl = <2>;
+			snps,en-tx-lpi-clockgating;
+			snps,axi-config = <&stmmac_axi_config_0>;
+			snps,tso;
+			status = "disabled";
+		};
+
+		usbh_ohci: usb@5800c000 {
+			compatible = "generic-ohci";
+			reg = <0x5800c000 0x1000>;
+			clocks = <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usbh_ehci: usb@5800d000 {
+			compatible = "generic-ehci";
+			reg = <0x5800d000 0x1000>;
+			clocks = <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			companion = <&usbh_ohci>;
+			status = "disabled";
+		};
+
+		ltdc: display-controller@5a001000 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x5a001000 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LTDC_PX>;
+			clock-names = "lcd";
+			resets = <&rcc LTDC_R>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
+		usbphyc: usbphyc@5a006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
+			status = "disabled";
+
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
+			};
+
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
+			};
+		};
+
+		usart1: serial@5c000000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x5c000000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART1_K>;
+			status = "disabled";
+		};
+
+		spi6: spi@5c001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x5c001000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI6_K>;
+			resets = <&rcc SPI6_R>;
+			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+			       <&mdma1 35 0x0 0x40002 0x0 0x0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c4: i2c@5c002000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x5c002000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C4_K>;
+			resets = <&rcc I2C4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x8>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			clocks = <&rcc RTCAPB>, <&rcc RTC>;
+			clock-names = "pclk", "rtc_ck";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		bsec: efuse@5c005000 {
+			compatible = "st,stm32mp15-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			part_number_otp: part_number_otp@4 {
+				reg = <0x4 0x1>;
+			};
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+		};
+
+		i2c6: i2c@5c009000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x5c009000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C6_K>;
+			resets = <&rcc I2C6_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x20>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		tamp: tamp@5c00a000 {
+			compatible = "st,stm32-tamp", "syscon", "simple-mfd";
+			reg = <0x5c00a000 0x400>;
+		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pin-controller@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-pinctrl";
+			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			hwlocks = <&hwspinlock 0>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc GPIOJ>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc GPIOK>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pin-controller-z@54004000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-z-pinctrl";
+			ranges = <0 0x54004000 0x400>;
+			pins-are-numbered;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			hwlocks = <&hwspinlock 0>;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+		};
+	};
+
+	mlahb: ahb {
+		compatible = "st,mlahb", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges = <0x00000000 0x38000000 0x10000>,
+			     <0x10000000 0x10000000 0x60000>,
+			     <0x30000000 0x30000000 0x60000>;
+
+		m4_rproc: m4@10000000 {
+			compatible = "st,stm32mp1-m4";
+			reg = <0x10000000 0x40000>,
+			      <0x30000000 0x40000>,
+			      <0x38000000 0x10000>;
+			resets = <&rcc MCU_R>;
+			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
+			st,syscfg-tz = <&rcc 0x000 0x1>;
+			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
+			st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+			st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp153.dtsi b/roms/u-boot/arch/arm/dts/stm32mp153.dtsi
new file mode 100644
index 000000000..1c1889b19
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp153.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	soc {
+		m_can1: can@4400e000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
+		m_can2: can@4400f000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157.dtsi
new file mode 100644
index 000000000..54e73ccea
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
+
+/ {
+	soc {
+		gpu: gpu@59000000 {
+			compatible = "vivante,gc";
+			reg = <0x59000000 0x800>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc GPU>, <&rcc GPU_K>;
+			clock-names = "bus" ,"core";
+			resets = <&rcc GPU_R>;
+		};
+
+		dsi: dsi@5a000000 {
+			compatible = "st,stm32-dsi";
+			reg = <0x5a000000 0x800>;
+			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+			clock-names = "pclk", "ref", "px_clk";
+			resets = <&rcc DSI_R>;
+			reset-names = "apb";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-avenger96.dts b/roms/u-boot/arch/arm/dts/stm32mp157a-avenger96.dts
new file mode 100644
index 000000000..9c165104f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+/* This is kept for backward compatibility and will be removed */
+#include "stm32mp15xx-dhcor-avenger96.dts"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
new file mode 100644
index 000000000..678761929
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright : STMicroelectronics 2018
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+
+/ {
+	aliases {
+		i2c3 = &i2c4;
+		mmc0 = &sdmmc1;
+		usb0 = &usbotg_hs;
+	};
+	config {
+		u-boot,boot-led = "heartbeat";
+		u-boot,error-led = "error";
+		u-boot,mmc-env-partition = "ssbl";
+		st,adc_usb_pd = <&adc1 18>, <&adc1 19>;
+		st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	reserved-memory {
+		optee@de000000 {
+			reg = <0xde000000 0x02000000>;
+			no-map;
+		};
+	};
+
+	led {
+		red {
+			label = "error";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			status = "okay";
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&clk_hse {
+	st,digbypass;
+};
+
+&i2c4 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&pmic {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-spl;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+	pins2 {
+		u-boot,dm-pre-reloc;
+		/* pull-up on rx to avoid floating level */
+		bias-pull-up;
+	};
+};
+
+&usbotg_hs {
+	u-boot,force-b-session-valid;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-dk1.dts b/roms/u-boot/arch/arm/dts/stm32mp157a-dk1.dts
new file mode 100644
index 000000000..4c8be9c8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-dk1.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
+	compatible = "st,stm32mp157a-dk1", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi
new file mode 100644
index 000000000..96fe46123
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-icore-stm32mp1-u-boot.dtsi"
+
+/{
+	aliases {
+		mmc0 = &sdmmc1;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-pre-reloc;
+
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	pins2 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	pins2 {
+		u-boot,dm-pre-reloc;
+		bias-pull-up;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
new file mode 100644
index 000000000..d3058a036
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam i.Core STM32MP1 C.TOUCH 2.0";
+	compatible = "engicam,icore-stm32mp1-ctouch2",
+		     "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
new file mode 100644
index 000000000..96fe46123
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-icore-stm32mp1-u-boot.dtsi"
+
+/{
+	aliases {
+		mmc0 = &sdmmc1;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-pre-reloc;
+
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	pins2 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	pins2 {
+		u-boot,dm-pre-reloc;
+		bias-pull-up;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
new file mode 100644
index 000000000..ec9f1d1cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit";
+	compatible = "engicam,icore-stm32mp1-edimm2.2",
+		     "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
new file mode 100644
index 000000000..d62c24d4c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi"
+
+&vddcore {
+	u-boot,dm-pre-reloc;
+};
+
+&vdd {
+	u-boot,dm-pre-reloc;
+};
+
+&vdd_usb {
+	u-boot,dm-pre-reloc;
+};
+
+&vdda {
+	u-boot,dm-pre-reloc;
+};
+
+&vdd_ddr {
+	u-boot,dm-pre-reloc;
+};
+
+&vtt_ddr {
+	u-boot,dm-pre-reloc;
+};
+
+&vref_ddr {
+	u-boot,dm-pre-reloc;
+};
+
+&vdd_sd {
+	u-boot,dm-pre-reloc;
+};
+
+&v3v3 {
+	u-boot,dm-pre-reloc;
+};
+
+&v2v8 {
+	u-boot,dm-pre-reloc;
+};
+
+&v1v8 {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi
new file mode 100644
index 000000000..01166ccac
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+	compatible = "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	vddcore: regulator-vddcore {
+		compatible = "regulator-fixed";
+		regulator-name = "vddcore";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vdd: regulator-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_usb: regulator-vdd-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_ddr: regulator-vdd-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+	};
+
+	vtt_ddr: regulator-vtt-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_ddr";
+		regulator-min-microvolt = <675000>;
+		regulator-max-microvolt = <675000>;
+		regulator-always-on;
+		vin-supply = <&vdd>;
+	};
+
+	vref_ddr: regulator-vref-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_ddr";
+		regulator-min-microvolt = <675000>;
+		regulator-max-microvolt = <675000>;
+		regulator-always-on;
+		vin-supply = <&vdd>;
+	};
+
+	vdd_sd: regulator-vdd-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2v8: regulator-v2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "v2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&v3v3>;
+	};
+
+	v1v8: regulator-v1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "v1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&v3v3>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&i2c2 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	status = "okay";
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2{
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc{
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc{
+	status = "okay";
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
new file mode 100644
index 000000000..e4bd21581
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-microgea-stm32mp1-u-boot.dtsi"
+
+/{
+	aliases {
+		mmc0 = &sdmmc1;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-pre-reloc;
+
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	pins2 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	pins2 {
+		u-boot,dm-pre-reloc;
+		bias-pull-up;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
new file mode 100644
index 000000000..674b2d330
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7\" Open Frame";
+	compatible = "engicam,microgea-stm32mp1-microdev2.0-of7",
+		     "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		power-supply = <&panel_pwr>;
+	};
+
+	panel_pwr: regulator-panel-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	panel {
+		compatible = "auo,b101aw03";
+		backlight = <&backlight>;
+		enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
+		power-supply = <&lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	status = "okay";
+};
+
+&ltdc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ltdc_pins>;
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pinctrl {
+	ltdc_pins: ltdc {
+		pins {
+			pinmux = <STM32_PINMUX('G', 10, AF14)>,	/* LTDC_B2 */
+				 <STM32_PINMUX('H', 12, AF14)>,	/* LTDC_R6 */
+				 <STM32_PINMUX('H', 11, AF14)>,	/* LTDC_R5 */
+				 <STM32_PINMUX('D', 10, AF14)>,	/* LTDC_B3 */
+				 <STM32_PINMUX('D', 9, AF14)>,	/* LTDC_B0 */
+				 <STM32_PINMUX('E', 5, AF14)>,	/* LTDC_G0 */
+				 <STM32_PINMUX('E', 6, AF14)>,	/* LTDC_G1 */
+				 <STM32_PINMUX('E', 13, AF14)>,	/* LTDC_DE */
+				 <STM32_PINMUX('E', 15, AF14)>,	/* LTDC_R7 */
+				 <STM32_PINMUX('G', 7, AF14)>,	/* LTDC_CLK */
+				 <STM32_PINMUX('G', 12, AF14)>,	/* LTDC_B1 */
+				 <STM32_PINMUX('H', 2, AF14)>,	/* LTDC_R0 */
+				 <STM32_PINMUX('H', 3, AF14)>,	/* LTDC_R1 */
+				 <STM32_PINMUX('H', 8, AF14)>,	/* LTDC_R2 */
+				 <STM32_PINMUX('H', 9, AF14)>,	/* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>,	/* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, AF14)>,	/* LTDC_G2 */
+				 <STM32_PINMUX('H', 14, AF14)>,	/* LTDC_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>,	/* LTDC_G4 */
+				 <STM32_PINMUX('I', 0, AF14)>,	/* LTDC_G5 */
+				 <STM32_PINMUX('I', 1, AF14)>,	/* LTDC_G6 */
+				 <STM32_PINMUX('I', 2, AF14)>,	/* LTDC_G7 */
+				 <STM32_PINMUX('I', 4, AF14)>,	/* LTDC_B4 */
+				 <STM32_PINMUX('I', 5, AF14)>,	/* LTDC_B5 */
+				 <STM32_PINMUX('B', 8, AF14)>,	/* LTDC_B6 */
+				 <STM32_PINMUX('I', 7, AF14)>,	/* LTDC_B7 */
+				 <STM32_PINMUX('I', 9, AF14)>,	/* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, AF14)>;	/* LTDC_HSYNC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&vdd>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi
new file mode 100644
index 000000000..e4bd21581
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-microgea-stm32mp1-u-boot.dtsi"
+
+/{
+	aliases {
+		mmc0 = &sdmmc1;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-pre-reloc;
+
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	pins2 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+
+	pins2 {
+		u-boot,dm-pre-reloc;
+		bias-pull-up;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
new file mode 100644
index 000000000..7a7586816
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 Carrier Board";
+	compatible = "engicam,microgea-stm32mp1-microdev2.0",
+		     "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&vdd>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi
new file mode 100644
index 000000000..836df6f74
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+
+&vin {
+	u-boot,dm-pre-reloc;
+};
+
+&vddcore {
+	u-boot,dm-pre-reloc;
+};
+
+&vdd {
+	u-boot,dm-pre-reloc;
+};
+
+&vddq_ddr {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1.dtsi
new file mode 100644
index 000000000..0b85175f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+	compatible = "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddcore: regulator-vddcore {
+		compatible = "regulator-fixed";
+		regulator-name = "vddcore";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+
+	vdd: regulator-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+
+	vddq_ddr: regulator-vddq-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vddq_ddr";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_a>;
+	status = "okay";
+
+	nand-controller@4,0 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2{
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc{
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc{
+	status = "okay";
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi
new file mode 100644
index 000000000..06ef3a409
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright : STMicroelectronics 2018
+ */
+
+#include "stm32mp157a-dk1-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-dk2.dts b/roms/u-boot/arch/arm/dts/stm32mp157c-dk2.dts
new file mode 100644
index 000000000..2bc92ef3a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-dk2.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
+	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&v3v3>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	touchscreen@38 {
+		compatible = "focaltech,ft6236";
+		reg = <0x38>;
+		interrupts = <2 2>;
+		interrupt-parent = <&gpiof>;
+		interrupt-controller;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		status = "okay";
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep1_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
new file mode 100644
index 000000000..f3002e995
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright : STMicroelectronics 2018
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
+
+/ {
+	aliases {
+		i2c3 = &i2c4;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+	};
+
+	config {
+		u-boot,boot-led = "heartbeat";
+		u-boot,error-led = "error";
+		u-boot,mmc-env-partition = "ssbl";
+		st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	reserved-memory {
+		optee@fe000000 {
+			reg = <0xfe000000 0x02000000>;
+			no-map;
+		};
+	};
+
+	led {
+		red {
+			label = "error";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			status = "okay";
+		};
+	};
+};
+
+&clk_hse {
+	st,digbypass;
+};
+
+&i2c4 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&pmic {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-spl;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc1_dir_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc2 {
+	u-boot,dm-spl;
+};
+
+&sdmmc2_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc2_d47_pins_a {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+	pins2 {
+		u-boot,dm-pre-reloc;
+		/* pull-up on rx to avoid floating level */
+		bias-pull-up;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-ed1.dts b/roms/u-boot/arch/arm/dts/stm32mp157c-ed1.dts
new file mode 100644
index 000000000..6e89f88a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-ed1.dts
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	model = "STMicroelectronics STM32MP157C eval daughter";
+	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@e8000000 {
+			reg = <0xe8000000 0x8000000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	/* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+	pinctrl-0 = <&adc1_in6_pins_a>;
+	pinctrl-names = "default";
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		/* 16.5 ck_cycles sampling time */
+		st,min-sample-time-nsecs = <400>;
+		status = "okay";
+	};
+};
+
+&cpu0{
+	cpu-supply = <&vddcore>;
+};
+
+&cpu1{
+	cpu-supply = <&vddcore>;
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&vin>;
+			buck2-supply = <&vin>;
+			buck3-supply = <&vin>;
+			buck4-supply = <&vin>;
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			vref_ddr-supply = <&vin>;
+			boost-supply = <&vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&timers6 {
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
new file mode 100644
index 000000000..ec60486f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright : STMicroelectronics 2018
+ */
+
+#include "stm32mp157c-ed1-u-boot.dtsi"
+
+/ {
+	aliases {
+		gpio26 = &stmfx_pinctrl;
+		i2c1 = &i2c2;
+		i2c4 = &i2c5;
+		pinctrl2 = &stmfx_pinctrl;
+		spi0 = &qspi;
+		usb0 = &usbotg_hs;
+	};
+};
+
+&flash0 {
+	u-boot,dm-spl;
+};
+
+&qspi {
+	u-boot,dm-spl;
+};
+
+&qspi_clk_pins_a {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&qspi_bk1_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&qspi_bk2_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-ev1.dts b/roms/u-boot/arch/arm/dts/stm32mp157c-ev1.dts
new file mode 100644
index 000000000..5c5b1ddf7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-ev1.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
+	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		ethernet0 = &ethernet0;
+	};
+
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	joystick {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&joystick_pins>;
+		pinctrl-names = "default";
+		button-0 {
+			label = "JoySel";
+			linux,code = <KEY_ENTER>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-1 {
+			label = "JoyDown";
+			linux,code = <KEY_DOWN>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-2 {
+			label = "JoyLeft";
+			linux,code = <KEY_LEFT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-3 {
+			label = "JoyRight";
+			linux,code = <KEY_RIGHT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-4 {
+			label = "JoyUp";
+			linux,code = <KEY_UP>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+		default-on;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&dcmi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmi_pins_a>;
+	pinctrl-1 = <&dcmi_sleep_pins_a>;
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&ov5640_0>;
+			bus-type = <5>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+		};
+	};
+};
+
+&dsi {
+	phy-dsi-supply = <&reg18>;
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "raydium,rm68200";
+		reg = <0>;
+		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+		backlight = <&panel_backlight>;
+		power-supply = <&v3v3>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_a>;
+	status = "okay";
+
+	nand-controller@4,0 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xclk";
+		DOVDD-supply = <&v2v8>;
+		powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
+		reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+		rotation = <180>;
+		status = "okay";
+
+		port {
+			ov5640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+				bus-width = <8>;
+				data-shift = <2>; /* lines 9:2 are used */
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+
+	stmfx: stmfx@42 {
+		compatible = "st,stmfx-0300";
+		reg = <0x42>;
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gpioi>;
+		vdd-supply = <&v3v3>;
+
+		stmfx_pinctrl: pinctrl {
+			compatible = "st,stmfx-0300-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+			joystick_pins: joystick-pins {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+				bias-pull-down;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_a>;
+	pinctrl-1 = <&m_can1_sleep_pins_a>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: mx66l51235l@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	flash1: mx66l51235l@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "disabled";
+};
+
+&timers2 {
+	/* spare dmas for other usage (un-delete to enable pwm capture) */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm2_pins_a>;
+		pinctrl-1 = <&pwm2_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&timers8 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm8_pins_a>;
+		pinctrl-1 = <&pwm8_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@7 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_b>;
+	pinctrl-1 = <&usart3_sleep_pins_b>;
+	pinctrl-2 = <&usart3_idle_pins_b>;
+	/*
+	 * HW flow control USART3_RTS is optional, and isn't default wired to
+	 * the connector. SB23 needs to be soldered in order to use it, and R77
+	 * (ETH_CLK) should be removed.
+	 */
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
new file mode 100644
index 000000000..6be728846
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+
+/ {
+	config {
+		u-boot,boot-led = "heartbeat";
+	};
+};
+
+&clk_hse {
+	st,digbypass;
+};
+
+&i2c2 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c2_pins_a {
+	u-boot,dm-pre-reloc;
+	pins {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&pmic {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-som.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
new file mode 100644
index 000000000..e367a311c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+
+	model = "Seeed Studio Odyssey-STM32MP157C SOM";
+	compatible = "seeed,odyssey-stm32mp157c-som", "st,stm32mp157";
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@d4000000 {
+			reg = <0xd4000000 0x4000000>;
+			no-map;
+		};
+
+		optee@de000000 {
+			reg = <0xde000000 0x02000000>;
+			no-map;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		blue {
+			label = "heartbeat";
+			gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	broken-cd;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm1_pins_a>;
+		pinctrl-1 = <&pwm1_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers6 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
new file mode 100644
index 000000000..abceba5cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>
+ */
+
+ #include "stm32mp157c-odyssey-som-u-boot.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc1;
+		usb0 = &usbotg_hs;
+	};
+	config {
+		u-boot,boot-led = "heartbeat";
+		u-boot,error-led = "error";
+	};
+	led {
+		red {
+			label = "error";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			status = "okay";
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	u-boot,dm-spl;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+	pins2 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
diff --git a/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey.dts b/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey.dts
new file mode 100644
index 000000000..0e725498d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp157c-odyssey.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-odyssey-som.dtsi"
+
+/ {
+
+	model = "Seeed Studio Odyssey-STM32MP157C Board";
+	compatible = "seeed,odyssey-stm32mp157c", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led {
+		compatible = "gpio-leds";
+		blue {
+			label = "heartbeat";
+			gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "disabled";
+	adc1: adc@0 {
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		st,min-sample-time-nsecs = <5000>;
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 6 13 18 19>;
+		status = "okay";
+	};
+	adc2: adc@100 {
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 2 6 18 19>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cec_pins_b>;
+	pinctrl-1 = <&cec_sleep_pins_b>;
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2s2 {
+	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s2_pins_a>;
+	pinctrl-1 = <&i2s2_sleep_pins_a>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xc.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xc.dtsi
new file mode 100644
index 000000000..b06a55a2f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/ {
+	soc {
+		cryp1: cryp@54001000 {
+			compatible = "st,stm32mp1-cryp";
+			reg = <0x54001000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-drc02-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-drc02-u-boot.dtsi
new file mode 100644
index 000000000..f83cfe90b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-drc02-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcom-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
new file mode 100644
index 000000000..4948ccd40
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcom.dtsi"
+
+/ {
+	model = "DH Electronics STM32MP15xx DHCOM DRC02";
+	compatible = "dh,stm32mp15xx-dhcom-drc02", "st,stm32mp1xx";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&adc {
+	status = "disabled";
+};
+
+&dac {
+	status = "disabled";
+};
+
+&gpiob {
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the STM32 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <8 0>;
+		output-high;
+		line-name = "rs485-rx-en";
+	};
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "Out1",
+			  "Out2", "", "", "";
+};
+
+&gpioi {
+	gpio-line-names = "In1", "", "", "",
+			  "", "", "", "",
+			  "In2", "", "", "",
+			  "", "", "", "";
+
+	/*
+	 * NOTE: The USB Hub on the DRC02 needs a reset signal to be
+	 * pulled high in order to be detected by the USB Controller.
+	 * This signal should be handled by USB power sequencing in
+	 * order to reset the Hub when USB bus is powered down, but
+	 * so far there is no such functionality.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <2 0>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c5 {	/* TP7/TP8 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&sdmmc3 {
+	/*
+	 * On DRC02, the SoM does not have SDIO WiFi. The pins
+	 * are used for on-board microSD slot instead.
+	 */
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	cs-gpios = <&gpioz 3 0>;
+	/* Use PIO for the display */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";	/* Enable once there is display driver */
+	/*
+	 * Note: PF3/GPIO_A , PD6/GPIO_B , PG0/GPIO_C , PC6/GPIO_E are
+	 * also connected to the display board connector.
+	 */
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+	status = "okay";
+};
+
+/*
+ * Note: PI3 is UART1_RTS and PI5 is UART1_CTS on DRC02 (uart4 of STM32MP1),
+ *       however the STM32MP1 pinmux cannot map them to UART4 .
+ */
+
+&uart8 {	/* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-pdk2-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-pdk2-u-boot.dtsi
new file mode 100644
index 000000000..12f89b339
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-pdk2-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcom-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dts b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dts
new file mode 100644
index 000000000..52a77c412
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcom.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP15xx DHCOM Premium Developer Kit (2)";
+	compatible = "dh,stm32mp15xx-dhcom-pdk2", "st,stm32mp15x";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi
new file mode 100644
index 000000000..3cac663d9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcom-u-boot.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ ethernet1;
+	};
+};
+
+/delete-node/ &ksz8851;
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
new file mode 100644
index 000000000..59d13713d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcom.dtsi"
+
+/ {
+	model = "DH Electronics STM32MP15xx DHCOM PicoITX";
+	compatible = "dh,stm32mp15xx-dhcom-picoitx", "st,stm32mp1xx";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&adc {
+	status = "disabled";
+};
+
+&dac {
+	status = "disabled";
+};
+
+&gpioa {
+	/*
+	 * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable
+	 * port power. This signal should be handled by USB power sequencing
+	 * in order to turn on port power when USB bus is powered up, but so
+	 * far there is no such functionality.
+	 */
+	usb-port-power {
+		gpio-hog;
+		gpios = <13 0>;
+		output-low;
+		line-name = "usb-port-power";
+	};
+};
+
+&i2c2 {	/* On board-to-board connector (optional) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c5 {	/* On board-to-board connector */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
new file mode 100644
index 000000000..11bc24706
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi"
+#include "stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi"
+#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi"
+
+/ {
+	aliases {
+		i2c1 = &i2c2;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		spi0 = &qspi;
+		usb0 = &usbotg_hs;
+		ethernet1 = &ksz8851;
+	};
+
+	config {
+		u-boot,boot-led = "heartbeat";
+		u-boot,error-led = "error";
+		st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+		dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
+		dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>;
+	};
+
+	led {
+		red {
+			label = "error";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			status = "okay";
+		};
+
+		blue {
+			default-state = "on";
+		};
+	};
+
+	/* This is actually on FMC2, but we do not have bus driver for that */
+	ksz8851: ks8851mll@64000000 {
+		compatible = "micrel,ks8851-mll";
+		reg = <0x64000000 0x20000>;
+	};
+};
+
+&gpiof {
+	snor-nwp {
+		gpio-hog;
+		gpios = <7 0>;
+		output-high;
+		line-name = "spi-nor-nwp";
+	};
+};
+
+&i2c4 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&pinctrl {
+	/* These should bound to FMC2 bus driver, but we do not have one */
+	pinctrl-0 = <&fmc_pins_b &mco2_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_b &mco2_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+
+	mco2_pins_a: mco2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	mco2_sleep_pins_a: mco2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
+		};
+	};
+};
+
+&pmic {
+	u-boot,dm-pre-reloc;
+};
+
+&flash0 {
+	u-boot,dm-spl;
+};
+
+&qspi {
+	u-boot,dm-spl;
+};
+
+&qspi_clk_pins_a {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&qspi_bk1_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&qspi_bk2_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&rcc {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_PLL4P
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		1 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_PLL4P
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 600.0 MHz => P = 50, Q = 50, R = 50 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = < 1 49 5 11 11 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-spl;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc1_dir_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc2 {
+	u-boot,dm-spl;
+};
+
+&sdmmc2_b4_pins_a {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc2_d47_pins_a {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+	pins2 {
+		u-boot,dm-pre-reloc;
+		/* pull-up on rx to avoid floating level */
+		bias-pull-up;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom.dtsi
new file mode 100644
index 000000000..a1d1b8dec
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcom.dtsi
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &ethernet0;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	ethernet_vio: vioregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&dcmi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmi_pins_a>;
+	pinctrl-1 = <&dcmi_sleep_pins_a>;
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0>;
+	phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&pinctrl {
+	ethernet0_rmii_pins_a: rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rmii_pins_sleep_a: rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: mx66l51235l@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&sdmmc1_b4_pins_a {
+	/*
+	 * SD bus pull-up resistors:
+	 * - optional on SoMs with SD voltage translator
+	 * - mandatory on SoMs without SD voltage translator
+	 */
+	pins1 {
+		bias-pull-up;
+	};
+	pins2 {
+		bias-pull-up;
+	};
+};
+
+&sdmmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,sig-dir;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "disabled";
+};
+
+&timers2 {
+	/* spare dmas for other usage (un-delete to enable pwm capture) */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm2_pins_a>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&timers6 {
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&timers8 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm8_pins_a>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+	timer@7 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
new file mode 100644
index 000000000..1ae57e185
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcor-u-boot.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		usb0 = &usbotg_hs;
+	};
+
+	config {
+		u-boot,boot-led = "led1";
+		u-boot,error-led = "led4";
+		dh,board-coding-gpios = <&gpiog 13 0>, <&gpiod 9 0>;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-spl;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc1_dir_pins_b {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc2 {
+	u-boot,dm-spl;
+};
+
+&sdmmc2_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc2_d47_pins_b {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_b {
+	u-boot,dm-pre-reloc;
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+	pins2 {
+		u-boot,dm-pre-reloc;
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
+};
+
+&usbotg_hs {
+	u-boot,force-b-session-valid;
+	hnp-srp-disable;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts
new file mode 100644
index 000000000..9b5dda318
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "stm32mp15xx-dhcor-io1v8.dtsi"
+#include "stm32mp15xx-dhcor-avenger96-u-boot.dtsi"
+
+/ {
+	model = "Arrow Electronics STM32MP15xx Avenger96 board";
+	compatible = "arrow,stm32mp15xx-avenger96", "st,stm32mp15x";
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		serial0 = &uart4;
+		serial1 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led {
+		compatible = "gpio-leds";
+		led1 {
+			label = "green:user0";
+			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user1";
+			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user2";
+			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user3";
+			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led5 {
+			label = "yellow:wifi";
+			gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "blue:bt";
+			gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+	phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+		};
+	};
+};
+
+&i2c1 {	/* X6 I2C1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c2 {	/* X6 I2C2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_c>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	eeprom0: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&uart4 {
+	/* On Low speed expansion header */
+	label = "LS-UART1";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	/* On Low speed expansion header */
+	label = "LS-UART0";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi
new file mode 100644
index 000000000..75435424d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcor-io3v3.dtsi"
+
+/ {
+	/* Enpirion EP3A8LQI U2 on the 1V8 IO DHCOR */
+	vdd_io: regulator-buck-io {
+		compatible = "regulator-fixed";
+		regulator-name = "buck-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd>;
+	};
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd_io>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi
new file mode 100644
index 000000000..64299df81
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		spi0 = &qspi;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x40000000>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+				interrupt-parent = <&pmic>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+				interrupt-parent = <&pmic>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+				interrupt-parent = <&pmic>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				interrupt-parent = <&pmic>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+				interrupt-parent = <&pmic>;
+				regulator-enable-ramp-delay = <300000>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+				interrupt-parent = <&pmic>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				interrupt-parent = <&pmic>;
+				regulator-active-discharge = <1>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				interrupt-parent = <&pmic>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
new file mode 100644
index 000000000..9d3db2087
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright : STMicroelectronics 2018
+ *
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi"
+#include "stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi"
+#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi"
+
+/ {
+	u-boot,dm-pre-reloc;
+	config {
+		dh,ddr3-coding-gpios = <&gpiog 0 0>, <&gpiog 1 0>;
+		dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>;
+	};
+};
+
+&flash0 {
+	u-boot,dm-spl;
+};
+
+&gpiof {
+	snor-nwp {
+		gpio-hog;
+		gpios = <7 0>;
+		output-high;
+		line-name = "spi-nor-nwp";
+	};
+};
+
+&i2c4 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&pmic {
+	u-boot,dm-pre-reloc;
+};
+
+&qspi {
+	u-boot,dm-spl;
+};
+
+&qspi_clk_pins_a {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&qspi_bk1_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&rcc {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 600.0 MHz => P = 99, Q = 74, R = 99 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = < 3 98 5 7 5 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dkx.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dkx.dtsi
new file mode 100644
index 000000000..68987f64c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,716 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@d4000000 {
+			reg = <0xd4000000 0x4000000>;
+			no-map;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "heartbeat";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-DK";
+		routing =
+			"Playback" , "MCLK",
+			"Capture" , "MCLK",
+			"MICL" , "Mic Bias";
+		dais = <&sai2a_port &sai2b_port &i2s2_port>;
+		status = "okay";
+	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "disabled";
+	adc1: adc@0 {
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		st,min-sample-time-nsecs = <5000>;
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 6 13 18 19>;
+		status = "okay";
+	};
+	adc2: adc@100 {
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 2 6 18 19>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cec_pins_b>;
+	pinctrl-1 = <&cec_sleep_pins_b>;
+	status = "okay";
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&cpu0{
+	cpu-supply = <&vddcore>;
+};
+
+&cpu1{
+	cpu-supply = <&vddcore>;
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
+		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				sii9022_tx_endpoint: endpoint {
+					remote-endpoint = <&i2s2_endpoint>;
+				};
+			};
+		};
+	};
+
+	cs42l51: cs42l51@4a {
+		compatible = "cirrus,cs42l51";
+		reg = <0x4a>;
+		#sound-dai-cells = <0>;
+		VL-supply = <&v3v3>;
+		VD-supply = <&v1v8_audio>;
+		VA-supply = <&v1v8_audio>;
+		VAHP-supply = <&v1v8_audio>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		clocks = <&sai2a>;
+		clock-names = "MCLK";
+		status = "okay";
+
+		cs42l51_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cs42l51_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			cs42l51_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	stusb1600@28 {
+		compatible = "st,stusb1600";
+		reg = <0x28>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioi>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&stusb1600_pins_a>;
+		status = "okay";
+		vdd-supply = <&vin>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			typec-power-opmode = "default";
+
+			port {
+				con_usbotg_hs_ep: endpoint {
+					remote-endpoint = <&usbotg_hs_ep>;
+				};
+			};
+		};
+	};
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&vin>;
+			buck2-supply = <&vin>;
+			buck3-supply = <&vin>;
+			buck4-supply = <&vin>;
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&vin>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&vin>;
+			ldo6-supply = <&v3v3>;
+			vref_ddr-supply = <&vin>;
+			boost-supply = <&vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
+&i2s2 {
+	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s2_pins_a>;
+	pinctrl-1 = <&i2s2_sleep_pins_a>;
+	status = "okay";
+
+	i2s2_port: port {
+		i2s2_endpoint: endpoint {
+			remote-endpoint = <&sii9022_tx_endpoint>;
+			format = "i2s";
+			mclk-fs = <256>;
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm1_pins_a>;
+		pinctrl-1 = <&pwm1_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers6 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_pins_c>;
+	pinctrl-1 = <&uart7_sleep_pins_c>;
+	pinctrl-2 = <&uart7_idle_pins_c>;
+	status = "disabled";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_c>;
+	pinctrl-1 = <&usart3_sleep_pins_c>;
+	pinctrl-2 = <&usart3_idle_pins_c>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usbotg_hs_ep: endpoint {
+			remote-endpoint = <&con_usbotg_hs_ep>;
+		};
+	};
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi
new file mode 100644
index 000000000..04f7a43ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@5000b000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@5000c000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi
new file mode 100644
index 000000000..328dad140
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AB>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi
new file mode 100644
index 000000000..7eaa245f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi
new file mode 100644
index 000000000..b63e207de
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AD>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/stv0991.dts b/roms/u-boot/arch/arm/dts/stv0991.dts
new file mode 100644
index 000000000..b04e89971
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/stv0991.dts
@@ -0,0 +1,55 @@
+/dts-v1/;
+
+/ {
+	model = "ST STV0991 application board";
+	compatible = "st,stv0991";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type="memory";
+		reg = <0x0 0x198000>;
+	};
+
+	uart0: serial@0x80406000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x80406000 0x1000>;
+		clock = <2700000>;
+	};
+
+	aliases {
+		spi0 = "/spi@80203000";		/* QSPI */
+	};
+
+	qspi: spi@80203000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x80203000 0x100>,
+				<0x40000000 0x1000000>;
+			clocks = <3750000>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x40000000>;
+			status = "okay";
+
+			flash0: n25q32@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "jedec,spi-nor";
+				reg = <0>;		/* chip select */
+				spi-max-frequency = <50000000>;
+				m25p,fast-read;
+				page-size = <256>;
+				block-size = <16>; 	/* 2^16, 64KB */
+				cdns,tshsl-ns = <50>;
+				cdns,tsd2d-ns = <50>;
+				cdns,tchsh-ns = <4>;
+				cdns,tslch-ns = <4>;
+			};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-a1000.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-a1000.dts
new file mode 100644
index 000000000..6c254ec4c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-a1000.dts
@@ -0,0 +1,230 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "a1000:blue:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 000000000..38a2c4134
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BA10 tvbox";
+	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
new file mode 100644
index 000000000..cf7b392df
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Chuwi V7 CW0825";
+	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5306de4: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-cubieboard.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-cubieboard.dts
new file mode 100644
index 000000000..197a1f2b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-cubieboard.dts
@@ -0,0 +1,263 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubieboard";
+	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard>;
+
+		blue {
+			label = "cubieboard:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
+		};
+
+		green {
+			label = "cubieboard:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard: led-pins {
+		pins = "PH20", "PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
new file mode 100644
index 000000000..896e27a08
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Dserve DSRV9703C";
+	compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor>;
+		min-microvolt = <3000000>;
+		max-microvolt = <3000000>;
+	};
+
+	reg_motor: reg-motor {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-motor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-gemei-g9.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-gemei-g9.dts
new file mode 100644
index 000000000..ea7a59dcf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-gemei-g9.dts
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Gemei G9 Tablet";
+	compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * TODO:
+ *   2x cameras via CSI
+ *   AXP battery management
+ *   NAND
+ *   OTG
+ *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+&codec {
+	/* PH15 controls power to external amplifier (ft2012q) */
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+
+	status = "okay";
+
+	button-158 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+
+	button-1142 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1142856>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+
+&uart0  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-hackberry.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-hackberry.dts
new file mode 100644
index 000000000..cc988ccd5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-hackberry.dts
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Miniand Hackberry";
+	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy = <&phy0>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
new file mode 100644
index 000000000..f63767cdd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hyundai A7HD";
+	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-inet-3f.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-inet-3f.dts
new file mode 100644
index 000000000..9aa8469a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-inet-3f.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the iNet 3F for u-boot only
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+
+/ {
+	model = "iNet 3F";
+	compatible = "inet,3f", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-inet-3w.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-inet-3w.dts
new file mode 100644
index 000000000..33232e94e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-inet-3w.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the iNet 3W for u-boot only
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+
+/ {
+	model = "iNet 3W";
+	compatible = "inet,3w", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-inet1.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-inet1.dts
new file mode 100644
index 000000000..26d0c1d6a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-inet1.dts
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "iNet-1";
+	compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0  {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5x: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+		touchscreen-size-x = <600>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0  {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-inet97fv2.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-inet97fv2.dts
new file mode 100644
index 000000000..5d096528e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-inet97fv2.dts
@@ -0,0 +1,219 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "INet-97F Rev 02";
+	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
new file mode 100644
index 000000000..221acd10f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
@@ -0,0 +1,387 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "iNet-9F Rev 03";
+	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_inet9f>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		left-joystick-left {
+			label = "Left Joystick Left";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+		};
+
+		left-joystick-right {
+			label = "Left Joystick Right";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+		};
+
+		left-joystick-up {
+			label = "Left Joystick Up";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+		};
+
+		left-joystick-down {
+			label = "Left Joystick Down";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		};
+
+		right-joystick-left {
+			label = "Right Joystick Left";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+		};
+
+		right-joystick-right {
+			label = "Right Joystick Right";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+		};
+
+		right-joystick-up {
+			label = "Right Joystick Up";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+		};
+
+		right-joystick-down {
+			label = "Right Joystick Down";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+		};
+
+		dpad-left {
+			label = "DPad Left";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
+		};
+
+		dpad-right {
+			label = "DPad Right";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+		};
+
+		dpad-up {
+			label = "DPad Up";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+		};
+
+		dpad-down {
+			label = "DPad Down";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+		};
+
+		x {
+			label = "Button X";
+			linux,code = <BTN_X>;
+			gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
+		};
+
+		y {
+			label = "Button Y";
+			linux,code = <BTN_Y>;
+			gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
+		};
+
+		a {
+			label = "Button A";
+			linux,code = <BTN_A>;
+			gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		};
+
+		b {
+			label = "Button B";
+			linux,code = <BTN_B>;
+			gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
+		};
+
+		select {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+		};
+
+		start {
+			label = "Start Button";
+			linux,code = <BTN_START>;
+			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+		};
+
+		top-left {
+			label = "Top Left Button";
+			linux,code = <BTN_TL>;
+			gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+		};
+
+		top-right {
+			label = "Top Right Button";
+			linux,code = <BTN_TR>;
+			gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	key_pins_inet9f: key-pins {
+		pins = "PA0", "PA1", "PA3", "PA4",
+		       "PA5", "PA6", "PA8", "PA9",
+		       "PA11", "PA12", "PA13",
+		       "PA14", "PA15", "PA16", "PA17",
+		       "PH22", "PH23", "PH24", "PH25", "PH26";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
new file mode 100644
index 000000000..80ecd7824
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Iteaduino Plus A10";
+	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	axp209: pmic@34 {
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-jesurun-q5.dts
new file mode 100644
index 000000000..247fa27ef
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-jesurun-q5.dts
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Jesurun Q5";
+	compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "q5:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
+		};
+
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-marsboard.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-marsboard.dts
new file mode 100644
index 000000000..0dbf69576
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-marsboard.dts
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A10";
+	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red1 {
+			label = "marsboard:red1:usr";
+			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		red2 {
+			label = "marsboard:red2:usr";
+			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		red3 {
+			label = "marsboard:red3:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		red4 {
+			label = "marsboard:red4:usr";
+			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&emac {
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-mini-xplus.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-mini-xplus.dts
new file mode 100644
index 000000000..f9d74e210
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-mini-xplus.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "PineRiver Mini X-Plus";
+	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&ir0_rx_pins {
+	/* The ir receiver is not always populated */
+	bias-pull-up;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-mk802.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-mk802.dts
new file mode 100644
index 000000000..059fe9c5d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-mk802.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802";
+	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-mk802ii.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-mk802ii.dts
new file mode 100644
index 000000000..17dcdf031
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-mk802ii.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802ii";
+	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
new file mode 100644
index 000000000..b74a61496
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A10-OLinuXino-LIME";
+	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * The A10-Lime is known to be unstable when running at 1008 MHz
+	 */
+	operating-points = <
+		/* kHz    uV */
+		912000  1350000
+		864000  1300000
+		624000  1250000
+		>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pin {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio   = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-pcduino.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-pcduino.dts
new file mode 100644
index 000000000..b97a0f2f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-pcduino.dts
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		tx {
+			label = "pcduino:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		back {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		home {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		menu {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-pcduino2.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-pcduino2.dts
new file mode 100644
index 000000000..bc4f12896
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-pcduino2.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The LinkSprite pcDuino2 board is almost identical to the older
+ * LinkSprite pcDuino1 board. The only software visible difference
+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
+ * is controlled by the PD2 pin (pulled-up by default). Also one of
+ * the USB host ports has been replaced with a USB WIFI chip.
+ */
+
+#include "sun4i-a10-pcduino.dts"
+
+/ {
+	model = "LinkSprite pcDuino2";
+	compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/roms/u-boot/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
new file mode 100644
index 000000000..84b25be1a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -0,0 +1,221 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Point of View Protab2-IPS9";
+	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-400 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun4i-a10.dtsi b/roms/u-boot/arch/arm/dts/sun4i-a10.dtsi
new file mode 100644
index 000000000..3a1c6b45c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun4i-a10.dtsi
@@ -0,0 +1,1164 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000 1400000
+				912000	1350000
+				864000	1300000
+				624000	1250000
+				>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <850000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun4i-a10-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&ccu RST_TCON0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <45>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			interrupts = <35>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <86>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun4i-a10-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun4i-a10-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can0_ph_pins: can0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			emac_pins: emac0-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			ir0_rx_pins: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir0_tx_pins: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			ir1_rx_pins: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			ir1_tx_pins: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			ps2_ch0_pins: ps2-ch0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			ps2_ch1_ph_pins: ps2-ch1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			spi2_cs0_pc_pins: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun4i-a10-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <24>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <17>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <18>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <19>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-amarula-relic.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-amarula-relic.dts
new file mode 100644
index 000000000..c7bd73f35
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-amarula-relic.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Amarula A64-Relic";
+	compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_aldo1>;
+			DOVDD-supply = <&reg_dldo3>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt5663";
+		reg = <0x5d>;
+		AVDD28-supply = <&reg_ldo_io0>;			/* VCC-CTP: GPIO0-LDO */
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH8 */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	/*
+	 * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
+	 * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
+	 * 0Ohm register to vcc-io-wifi so eldo1 is used.
+	 */
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;	/* WL-WAKE-AP: PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-bananapi-m64.dts
new file mode 100644
index 000000000..f7fe9fa50
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-bananapi-m64.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi-M64";
+	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapi-m64:red:pwr";
+			gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "bananapi-m64:green:user";
+			gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */
+		};
+
+		led-2 {
+			label = "bananapi-m64:blue:user";
+			gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	/*
+	 * This regulator also drives the PE pingroup GPIOs,
+	 * which also controls two LEDs.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "afvcc-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	/*
+	 * This regulator also indirectly drives the PD pingroup GPIOs,
+	 * which also controls the power LED.
+	 */
+	regulator-always-on;
+	regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Microphone Jack",
+				    "Microphone", "Onboard Microphone";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"MIC2", "Microphone Jack",
+			"Onboard Microphone", "MBIAS",
+			"MIC1", "Onboard Microphone";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo4>;
+		device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-cpu-opp.dtsi b/roms/u-boot/arch/arm/dts/sun50i-a64-cpu-opp.dtsi
new file mode 100644
index 000000000..578c37490
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-cpu-opp.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com>
+ */
+
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-nanopi-a64.dts
new file mode 100644
index 000000000..09b3c7fb8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-nanopi-a64.dts
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi A64";
+	compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "nanopi-a64:blue:status";
+			gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+/* i2c1 connected with gpio headers like pine64, bananapi */
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8189etv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pg-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
new file mode 100644
index 000000000..577f9e1d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Oceanic Systems (UK) Ltd.
+// Copyright (C) 2019 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+	model = "Oceanic 5205 5inMFD";
+	compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	allwinner,tx-delay-ps = <600>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&reg_ldo_io0>;			/* VDD_CTP: GPIO0-LDO */
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH11 */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vdd-ctp";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
new file mode 100644
index 000000000..efb20846d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
+// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
+
+#include "sun50i-a64-olinuxino.dts"
+
+/ {
+	model = "Olimex A64-Olinuxino-eMMC";
+	compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-olinuxino.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-olinuxino.dts
new file mode 100644
index 000000000..f3f8e177a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-olinuxino.dts
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A64-Olinuxino";
+	compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a64-olinuxino:red:user";
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc1>;
+	allwinner,tx-delay-ps = <600>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo4>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&pio {
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;	/* set N_VBUSEN as output pin */
+	};
+};
+
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/*	vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
+ * 1.35V that the PMIC can drive.
+ */
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
+	regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-orangepi-win.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-orangepi-win.dts
new file mode 100644
index 000000000..70e31743f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-orangepi-win.dts
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Win/Win Plus";
+	compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "orangepi:green:status";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "afvcc-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Microphone Jack",
+				    "Microphone", "Onboard Microphone";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"MIC2", "Microphone Jack",
+			"Onboard Microphone", "MBIAS",
+			"MIC1", "Onboard Microphone";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+		status = "okay";
+	};
+};
+
+/* On debug connector */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo4>;
+		device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pine64-lts.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pine64-lts.dts
new file mode 100644
index 000000000..596a25907
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pine64-lts.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2018 ARM Ltd.
+
+#include <dt-bindings/leds/common.h>
+#include "sun50i-a64-sopine-baseboard.dts"
+
+/ {
+	model = "Pine64 LTS";
+	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
+		     "allwinner,sun50i-a64";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		};
+	};
+};
+
+&mmc0 {
+	broken-cd;		/* card detect is broken on *some* boards */
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pine64-plus.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pine64-plus.dts
new file mode 100644
index 000000000..b54099b65
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pine64-plus.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+#include "sun50i-a64-pine64.dts"
+
+/ {
+	model = "Pine64+";
+	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
+
+	/* TODO: Camera, touchscreen, etc. */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pine64.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pine64.dts
new file mode 100644
index 000000000..329cf2765
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pine64.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Pine64";
+	compatible = "pine64,pine64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&ext_rmii_phy1>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
+ * work at 1.35V with less power consumption.
+ * As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead.
+ */
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+/* On Euler connector */
+&spdif {
+	status = "disabled";
+};
+
+/* On Exp and Euler connectors */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pinebook.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pinebook.dts
new file mode 100644
index 000000000..7ae16541d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pinebook.dts
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Pinebook";
+	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
+		default-brightness-level = <2>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&reg_vbklt>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		lid_switch {
+			label = "Lid Switch";
+			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	panel_edp: panel-edp {
+		compatible = "neweast,wjfh116008a";
+		backlight = <&backlight>;
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_edp_in: endpoint {
+				remote-endpoint = <&anx6345_out_edp>;
+			};
+		};
+	};
+
+	reg_vbklt: vbklt {
+		compatible = "regulator-fixed";
+		regulator-name = "vbklt";
+		regulator-min-microvolt = <18000000>;
+		regulator-max-microvolt = <18000000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		VCC-supply = <&reg_vcc5v0>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mixer0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	max-frequency = <200000000>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_eldo1>;
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_i2c {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pl89_pins>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_fldo1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			anx6345_in: port@0 {
+				reg = <0>;
+				anx6345_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+
+			anx6345_out: port@1 {
+				reg = <1>;
+				anx6345_out_edp: endpoint {
+					remote-endpoint = <&panel_edp_in>;
+				};
+			};
+		};
+	};
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-edp";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	panel-supply = <&reg_dc1sw>;
+	dvdd25-supply = <&reg_dldo2>;
+	dvdd12-supply = <&reg_fldo1>;
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint {
+		remote-endpoint = <&anx6345_in_tcon0>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.0.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 000000000..fb65319a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Developer Batch (1.0)";
+	compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64";
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+	flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.1.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 000000000..5e59d3752
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Braveheart (1.1)";
+	compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64";
+};
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since
+	 * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+	 * being off is around 20%. Duty cycle for the lowest brightness level
+	 * also varries quite a bit between individual boards, so the lowest
+	 * value here was chosen as a safe default.
+	 */
+	brightness-levels = <
+		774  793  814  842
+		882  935  1003 1088
+		1192 1316 1462 1633
+		1830 2054 2309 2596
+		2916 3271 3664 4096>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <400>;
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.2.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.2.dts
new file mode 100644
index 000000000..4e7e237cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone-1.2.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone (1.2)";
+	compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64";
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since 1.0,
+	 * and the lowest PWM duty cycle that doesn't lead to backlight being off
+	 * is around 10%. Duty cycle for the lowest brightness level also varries
+	 * quite a bit between individual boards, so the lowest value here was
+	 * chosen as a safe default.
+	 */
+	brightness-levels = <
+		5000 5248 5506 5858 6345
+		6987 7805 8823 10062 11543
+		13287 15317 17654 20319 23336
+		26724 30505 34702 39335 44427
+		50000
+	>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <500>;
+};
+
+&lis3mdl {
+	/*
+	 * Board revision 1.2 fixed routing of the interrupt to DRDY pin,
+	 * enable interrupts.
+	 */
+	interrupt-parent = <&pio>;
+	interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
+};
+
+&mmc1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone.dtsi b/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone.dtsi
new file mode 100644
index 000000000..9f69d489a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		ethernet0 = &rtl8723cs;
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+		power-supply = <&reg_ps>;
+		/* Backlight configuration differs per PinePhone revision. */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+		};
+
+		led-2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		};
+	};
+
+	reg_ps: ps-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ps";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	reg_vbat_wifi: vbat-wifi {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vbat-wifi";
+	};
+
+	sgm3140: led-controller {
+		compatible = "sgmicro,sgm3140";
+		vin-supply = <&reg_dcdc1>;
+
+		sgm3140_flash: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		vcc-supply = <&reg_dcdc1>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "xingbangda,xbd599";
+		reg = <0>;
+		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
+		iovcc-supply = <&reg_dldo2>;
+		vcc-supply = <&reg_ldo_io0>;
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt917s";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		AVDD28-supply = <&reg_ldo_io0>;
+		VDDIO-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* Magnetometer */
+	lis3mdl: magnetometer@1e {
+		compatible = "st,lis3mdl-magn";
+		reg = <0x1e>;
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+
+	/* Light/proximity sensor */
+	light-sensor@48 {
+		compatible = "sensortek,stk3311";
+		reg = <0x48>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
+	};
+
+	/* Accelerometer/gyroscope */
+	accelerometer@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	wakeup-source;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_vbat_wifi>;
+	vqmmc-supply = <&reg_dldo4>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd-ctp-stk";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8-typec";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Earpiece",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Headphone Jack", "HP",
+			"Internal Earpiece", "EARPIECE",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+	};
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts
new file mode 100644
index 000000000..6265360ce
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Icenowy Zheng <icenowy@aosc.io>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-pinetab.dts"
+
+/ {
+	model = "PineTab, Early Adopter's version";
+	compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
+};
+
+&dsi {
+	/delete-node/ panel@0;
+
+	panel@0 {
+		compatible = "feixin,k101-im2byl02", "ilitek,ili9881c";
+		reg = <0>;
+		power-supply = <&reg_dc1sw>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-pinetab.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-pinetab.dts
new file mode 100644
index 000000000..422a8507f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-pinetab.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PineTab, Development Sample";
+	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+		default-brightness-level = <15>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&vdd_bl>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c-csi {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Rear camera */
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_dldo3>;
+			DOVDD-supply = <&reg_aldo1>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vdd_bl: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "feixin,k101-im2ba02";
+		reg = <0>;
+		avdd-supply = <&reg_dc1sw>;
+		dvdd-supply = <&reg_dc1sw>;
+		cvdd-supply = <&reg_ldo_io1>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		AVDD28-supply = <&reg_ldo_io1>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* TODO: add Bochs BMA223 accelerometer here */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mixer1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-enable-ramp-delay = <3500000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_ldo_io0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi b/roms/u-boot/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
new file mode 100644
index 000000000..02b1ae046
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "sunxi-u-boot.dtsi"
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
new file mode 100644
index 000000000..e22b94c83
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+	model = "SoPine with baseboard";
+	compatible = "pine64,sopine-baseboard", "pine64,sopine",
+		     "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc1v8: vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-name = "vcc-phy";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-sopine.dtsi b/roms/u-boot/arch/arm/dts/sun50i-a64-sopine.dtsi
new file mode 100644
index 000000000..df62044ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-sopine.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	disable-wp;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-1v8-lpddr";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64-teres-i.dts b/roms/u-boot/arch/arm/dts/sun50i-a64-teres-i.dts
new file mode 100644
index 000000000..f0a16f355
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64-teres-i.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) Harald Geyer <harald@ccbib.org>
+// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A64 Teres-I";
+	compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		power-supply = <&reg_dcdc1>;
+		brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>;
+		default-brightness-level = <5>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		framebuffer-lcd {
+			eDP25-supply = <&reg_dldo2>;
+			eDP12-supply = <&reg_dldo3>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid Switch";
+			gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "teres-i:green:capslock";
+			gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		};
+
+		led-1 {
+			label = "teres-i:green:numlock";
+			gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_dldo3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				anx6345_in: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+		};
+	};
+};
+
+&mixer0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_aldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pd";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-edp";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work with this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&anx6345_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-a64.dtsi b/roms/u-boot/arch/arm/dts/sun50i-a64.dtsi
new file mode 100644
index 000000000..57786fc12
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-a64.dtsi
@@ -0,0 +1,1333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// based on the Allwinner H3 dtsi:
+//    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_lcd: framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&ccu CLK_TCON0>,
+				 <&display_clocks CLK_MIXER0>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-hdmi";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun50i-a64-display-engine";
+		allwinner,pipelines = <&mixer0>,
+				      <&mixer1>;
+		status = "disabled";
+	};
+
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	osc32k: osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext-osc32k";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-a64-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+				"Left DAC", "DACL",
+				"Right DAC", "DACR",
+				"ADCL", "Left ADC",
+				"ADCR", "Right ADC";
+		status = "disabled";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		allwinner,erratum-unknown1;
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0_thermal: gpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		gpu1_thermal: gpu1-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		bus@1000000 {
+			compatible = "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-a64-de2-clk";
+				reg = <0x0 0x10000>;
+				clocks = <&ccu CLK_BUS_DE>,
+					 <&ccu CLK_DE>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			rotate: rotate@20000 {
+				compatible = "allwinner,sun50i-a64-de2-rotate",
+					     "allwinner,sun8i-a83t-de2-rotate";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&display_clocks CLK_BUS_ROT>,
+					 <&display_clocks CLK_ROT>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_ROT>;
+			};
+
+			mixer0: mixer@100000 {
+				compatible = "allwinner,sun50i-a64-de2-mixer-0";
+				reg = <0x100000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER0>,
+					 <&display_clocks CLK_MIXER0>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer0_out: port@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+
+						mixer0_out_tcon0: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&tcon0_in_mixer0>;
+						};
+
+						mixer0_out_tcon1: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&tcon1_in_mixer0>;
+						};
+					};
+				};
+			};
+
+			mixer1: mixer@200000 {
+				compatible = "allwinner,sun50i-a64-de2-mixer-1";
+				reg = <0x200000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER1>,
+					 <&display_clocks CLK_MIXER1>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER1>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer1_out: port@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+
+						mixer1_out_tcon0: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&tcon0_in_mixer1>;
+						};
+
+						mixer1_out_tcon1: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&tcon1_in_mixer1>;
+						};
+					};
+				};
+			};
+		};
+
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun50i-a64-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@18000 {
+				compatible = "mmio-sram";
+				reg = <0x00018000 0x28000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00018000 0x28000>;
+
+				de2_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-a64-sram-c";
+					reg = <0x0000 0x28000>;
+				};
+			};
+
+			sram_c1: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x40000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-a64-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x40000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <8>;
+			dma-requests = <27>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun50i-a64-tcon-lcd",
+				     "allwinner,sun8i-a83t-tcon-lcd";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+
+					tcon0_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun50i-a64-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON1>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon1>;
+					};
+
+					tcon1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-a64-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun50i-a64-sid";
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 0x8>;
+			};
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun50i-a64-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun50i-a64-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun50i-a64-usb-phy";
+			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun50i-a64-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun50i-a64-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
+				       "PE7", "PE8", "PE9", "PE10", "PE11";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH0", "PH1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
+			/omit-if-no-ref/
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9",
+				       "PD10", "PD11", "PD12", "PD13",
+				       "PD14", "PD15", "PD16", "PD17",
+				       "PD18", "PD19", "PD20", "PD21";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC8", "PC9",
+				       "PC10","PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_ds_pin: mmc2-ds-pin {
+				pins = "PC1";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			pwm_pin: pwm-pin {
+				pins = "PD22";
+				function = "pwm";
+			};
+
+			rmii_pins: rmii-pins {
+				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+				       "PD18", "PD19", "PD20", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			rgmii_pins: rgmii-pins {
+				pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+				       "PD13", "PD15", "PD16", "PD17", "PD18",
+				       "PD19", "PD20", "PD21", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH8";
+				function = "spdif";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PD0", "PD1", "PD2", "PD3";
+				function = "spi1";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PD0", "PD1";
+				function = "uart3";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PD2", "PD3";
+				function = "uart4";
+			};
+
+			uart4_rts_cts_pins: uart4-rts-cts-pins {
+				pins = "PD4", "PD5";
+				function = "uart4";
+			};
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-spdif",
+				     "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c21800 {
+			compatible = "allwinner,sun50i-a64-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c21800 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 3>, <&dma 3>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 4>, <&dma 4>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 27>, <&dma 27>;
+			status = "disabled";
+		};
+
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-codec-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-codec",
+				     "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x600>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-a64-ths";
+			reg = <0x01c25000 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun50i-a64-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun50i-a64-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 112>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
+		csi: csi@1cb0000 {
+			compatible = "allwinner,sun50i-a64-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun50i-a64-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>;
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun50i-a64-mipi-dphy",
+				     "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		deinterlace: deinterlace@1e00000 {
+			compatible = "allwinner,sun50i-a64-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01e00000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun50i-a64-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon1: endpoint {
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun50i-a64-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO0>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun50i-a64-rtc",
+				     "allwinner,sun8i-h3-rtc";
+			reg = <0x01f00000 0x400>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun50i-a64-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun50i-a64-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun50i-a64-codec-analog";
+			reg = <0x01f015c0 0x4>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun50i-a64-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_ir: ir@1f02000 {
+			compatible = "allwinner,sun50i-a64-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01f02000 0x400>;
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_rx_pin>;
+			status = "disabled";
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01f03800 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun50i-a64-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pl89_pins: r-i2c-pl89-pins {
+				pins = "PL8", "PL9";
+				function = "s_i2c";
+			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 6>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu 2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun50i-a64-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000..2e2b14c0a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H5";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts
new file mode 100644
index 000000000..350376748
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <sunxi-bananapi-m2-plus.dtsi>
+
+/ {
+	model = "Banana Pi BPI-M2-Plus H5";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
new file mode 100644
index 000000000..076a0b983
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5-emlid-neutis-n5.dtsi"
+
+/ {
+	model = "Emlid Neutis N5 Developer board";
+	compatible = "emlid,neutis-n5-devboard",
+		     "emlid,neutis-n5",
+		     "allwinner,sun50i-h5";
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi b/roms/u-boot/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
new file mode 100644
index 000000000..6db485584
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+#include <sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
new file mode 100644
index 000000000..a91806618
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 BayLibre, SAS
+// Author: Neil Armstrong <narmstrong@baylibre.com>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <sunxi-libretech-all-h3-cc.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H5";
+	compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
+};
+
+&mmc2 {
+	mmc-ddr-3_3v;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h3-it.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h3-it.dts
new file mode 100644
index 000000000..f6756d1bb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h3-it.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <sunxi-libretech-all-h3-it.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-IT H5";
+	compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
new file mode 100644
index 000000000..df1b9263a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+#include "sun50i-h5-libretech-all-h3-cc.dts"
+
+/ {
+	model = "Libre Computer Board ALL-H5-CC H5";
+	compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+};
+
+&codec {
+	/* No line out; only onboard microphone */
+	allwinner,audio-routing =
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+};
+
+/* This board has external PHY */
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	/delete-property/ allwinner,leds-active-low;
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
new file mode 100644
index 000000000..4f9ba53ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Antony Antony <antony@phenome.org>
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Plus2";
+	compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-nanopi-neo2.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
new file mode 100644
index 000000000..b059e2081
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO 2";
+	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
new file mode 100644
index 000000000..70b5f0998
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi PC 2";
+	compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r-gpio-keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-prime.dts
new file mode 100644
index 000000000..cb44bfa59
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-prime.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-h5-orangepi-pc2.dts, which is:
+//   Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Prime";
+	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r-gpio-keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
new file mode 100644
index 000000000..ef5ca6444
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Zero Plus";
+	compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5";
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts b/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
new file mode 100644
index 000000000..c95a68541
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2";
+	compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h5.dtsi b/roms/u-boot/arch/arm/dts/sun50i-h5.dtsi
new file mode 100644
index 000000000..3a1c8b2ef
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h5.dtsi
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+#include <sunxi-h3-h5.dtsi>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu",
+			     "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun50i-h5-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c1: sram@18000 {
+				compatible = "mmio-sram";
+				reg = <0x00018000 0x1c000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00018000 0x1c000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h5-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x1c000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-h5-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun50i-h5-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		mali: gpu@1e80000 {
+			compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+			reg = <0x01e80000 0x30000>;
+			/*
+			 * While the datasheet lists an interrupt for the
+			 * PMU, the actual silicon does not have the PMU
+			 * block. Reads all return zero, and writes are
+			 * ignored.
+			 */
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-h5-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu_thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun50i-h5-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun50i-h5-de2-clk";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+	clock-names = "ahb", "mmc";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+	clock-names = "ahb", "mmc";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun50i-h5-emmc",
+		     "allwinner,sun50i-a64-emmc";
+	clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+	clock-names = "ahb", "mmc";
+};
+
+&pio {
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	compatible = "allwinner,sun50i-h5-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun50i-h5-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun50i-h5-sid";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/roms/u-boot/arch/arm/dts/sun50i-h6-beelink-gs1.dts
new file mode 100644
index 000000000..7c9dbde64
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Beelink GS1";
+	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "beelink:white:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_aldo2>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+				regulator-enable-ramp-delay = <100000>;
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc25-dram";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6-cpu-opp.dtsi b/roms/u-boot/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
new file mode 100644
index 000000000..1a5eddc5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+// Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
+
+/ {
+	cpu_opp_table: cpu-opp-table {
+		compatible = "allwinner,sun50i-h6-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp@480000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <480000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp@720000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <720000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp@816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp@888000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <888000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp@1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <940000 940000 1200000>;
+			opp-microvolt-speed1 = <880000 880000 1200000>;
+			opp-microvolt-speed2 = <880000 880000 1200000>;
+		};
+
+		opp@1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1000000 1000000 1200000>;
+			opp-microvolt-speed1 = <940000 940000 1200000>;
+			opp-microvolt-speed2 = <940000 940000 1200000>;
+		};
+
+		opp@1488000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1488000000>;
+
+			opp-microvolt-speed0 = <1060000 1060000 1200000>;
+			opp-microvolt-speed1 = <1000000 1000000 1200000>;
+			opp-microvolt-speed2 = <1000000 1000000 1200000>;
+		};
+
+		opp@1608000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1608000000>;
+
+			opp-microvolt-speed0 = <1090000 1090000 1200000>;
+			opp-microvolt-speed1 = <1030000 1030000 1200000>;
+			opp-microvolt-speed2 = <1030000 1030000 1200000>;
+		};
+
+		opp@1704000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1704000000>;
+
+			opp-microvolt-speed0 = <1120000 1120000 1200000>;
+			opp-microvolt-speed1 = <1060000 1060000 1200000>;
+			opp-microvolt-speed2 = <1060000 1060000 1200000>;
+		};
+
+		opp@1800000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1800000000>;
+
+			opp-microvolt-speed0 = <1160000 1160000 1200000>;
+			opp-microvolt-speed1 = <1100000 1100000 1200000>;
+			opp-microvolt-speed2 = <1100000 1100000 1200000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-3.dts b/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-3.dts
new file mode 100644
index 000000000..15c9dd8c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-3.dts
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi 3";
+	compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		/* Always on 3.3V regulator for WiFi and BT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcm: sdio-wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_vcc_wifi_io>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led-ir";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-audio-tv-ephy-mac";
+			};
+
+			/* ALDO3 is shorted to CLDO1 */
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18-dram-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-pc";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* There's the BT part of the AP6256 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb2otg {
+	/*
+	 * This board doesn't have a controllable VBUS even though it
+	 * does have an ID pin. Using it as anything but a USB host is
+	 * unsafe.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-lite2.dts b/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
new file mode 100644
index 000000000..e8770858b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
+
+#include "sun50i-h6-orangepi.dtsi"
+
+/ {
+	model = "OrangePi Lite2";
+	compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
+
+	aliases {
+		serial1 = &uart1; /* BT-UART */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_cldo2>;
+	vqmmc-supply = <&reg_bldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcm: sdio-wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>;	/* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&reg_cldo2 {
+	/*
+	 * This regulator is connected with CLDO3.
+	 * Before the kernel can support synchronized
+	 * enable of coupled regulators, keep them
+	 * both always on as a ugly hack.
+	 */
+	regulator-always-on;
+};
+
+&reg_cldo3 {
+	/*
+	 * This regulator is connected with CLDO2.
+	 * See the comments for CLDO2.
+	 */
+	regulator-always-on;
+};
+
+/* There's the BT part of the AP6255 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts b/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
new file mode 100644
index 000000000..29a081e72
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+#include "sun50i-h6-orangepi.dtsi"
+
+/ {
+	model = "OrangePi One Plus";
+	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+		vin-supply = <&reg_aldo2>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi.dtsi b/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi.dtsi
new file mode 100644
index 000000000..ebc120a92
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi One Plus";
+	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc25-dram";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	/*
+	 * OrangePi Lite 2 and One Plus, where this DT is used, don't
+	 * have a controllable VBUS even though they do have an ID pin.
+	 * Using it as anything but a USB host is unsafe.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6-pine-h64.dts b/roms/u-boot/arch/arm/dts/sun50i-h6-pine-h64.dts
new file mode 100644
index 000000000..961732c52
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Pine H64 model A";
+	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	hdmi_connector: connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "pine-h64:green:heartbeat";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		};
+
+		link {
+			label = "pine-h64:white:link";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
+		};
+
+		status {
+			label = "pine-h64:blue:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+				regulator-enable-ramp-delay = <100000>;
+			};
+
+			reg_aldo3: aldo3 {
+				/* This regulator is connected with CLDO1 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				/* This regulator is connected with ALDO3 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-2";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+	};
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+/*
+ * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
+ * flash and eMMC at the same time, as one of them would fail probing.
+ * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
+ * fix this up in no eMMC is connected.
+ */
+&spi0 {
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb3_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6-tanix-tx6.dts b/roms/u-boot/arch/arm/dts/sun50i-h6-tanix-tx6.dts
new file mode 100644
index 000000000..be81330db
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6-tanix-tx6.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Tanix TX6";
+	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_cpu_gpu: vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-tanix-tx5max";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h6.dtsi b/roms/u-boot/arch/arm/dts/sun50i-h6.dtsi
new file mode 100644
index 000000000..8a62a9fbe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h6.dtsi
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun50i-h6-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		bus@1000000 {
+			compatible = "allwinner,sun50i-h6-de3",
+				     "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-h6-de3-clk";
+				reg = <0x0 0x10000>;
+				clocks = <&ccu CLK_DE>,
+					 <&ccu CLK_BUS_DE>;
+				clock-names = "mod",
+					      "bus";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			mixer0: mixer@100000 {
+				compatible = "allwinner,sun50i-h6-de3-mixer-0";
+				reg = <0x100000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER0>,
+					 <&display_clocks CLK_MIXER0>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER0>;
+				iommus = <&iommu 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer0_out: port@1 {
+						reg = <1>;
+
+						mixer0_out_tcon_top_mixer0: endpoint {
+							remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+						};
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-h6-video-engine";
+			reg = <0x01c0e000 0x2000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_MBUS_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+			iommus = <&iommu 3>;
+		};
+
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h6-mali",
+				     "arm,mali-t720";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+		crypto: crypto@1904000 {
+			compatible = "allwinner,sun50i-h6-crypto";
+			reg = <0x01904000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-h6-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@28000 {
+				compatible = "mmio-sram";
+				reg = <0x00028000 0x1e000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00028000 0x1e000>;
+
+				de2_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h6-sram-c",
+						     "allwinner,sun50i-a64-sram-c";
+					reg = <0x0000 0x1e000>;
+				};
+			};
+
+			sram_c1: sram@1a00000 {
+				compatible = "mmio-sram";
+				reg = <0x01a00000 0x200000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01a00000 0x200000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h6-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x200000>;
+				};
+			};
+		};
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-h6-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-h6-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <46>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		msgbox: mailbox@3003000 {
+			compatible = "allwinner,sun50i-h6-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x03003000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun50i-h6-sid";
+			reg = <0x03006000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x4>;
+			};
+		};
+
+		watchdog: watchdog@30090a0 {
+			compatible = "allwinner,sun50i-h6-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+			/* Broken on some H6 boards */
+			status = "disabled";
+		};
+
+		pwm: pwm@300a000 {
+			compatible = "allwinner,sun50i-h6-pwm";
+			reg = <0x0300a000 0x400>;
+			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+			clock-names = "mod", "bus";
+			resets = <&ccu RST_BUS_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-h6-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ext_rgmii_pins: rgmii-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD11", "PD12", "PD13", "PD19", "PD20";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			hdmi_pins: hdmi-pins {
+				pins = "PH8", "PH9", "PH10";
+				function = "hdmi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PD25", "PD26";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH5", "PH6";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PD23", "PD24";
+				function = "i2c2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC1", "PC4", "PC5", "PC6",
+				       "PC7", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			/* pin shared with MMC2-CMD (eMMC) */
+			/omit-if-no-ref/
+			spi0_cs_pin: spi0-cs-pin {
+				pins = "PC5";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH4", "PH5", "PH6";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs_pin: spi1-cs-pin {
+				pins = "PH3";
+				function = "spi1";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH7";
+				function = "spdif";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>,
+			      <0x03022000 0x2000>,
+			      <0x03024000 0x2000>,
+			      <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		iommu: iommu@30f0000 {
+			compatible = "allwinner,sun50i-h6-iommu";
+			reg = <0x030f0000 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IOMMU>;
+			resets = <&ccu RST_BUS_IOMMU>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h6-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@5020000 {
+			compatible = "allwinner,sun50i-h6-emac",
+				     "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x05020000 0x10000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		i2s1: i2s@5091000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-i2s";
+			reg = <0x05091000 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spdif: spdif@5093000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		usb2otg: usb@5100000 {
+			compatible = "allwinner,sun50i-h6-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
+			extcon = <&usb2phy 0>;
+			status = "disabled";
+		};
+
+		usb2phy: phy@5100400 {
+			compatible = "allwinner,sun50i-h6-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x4>,
+			      <0x05311800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
+		dwc3: usb@5200000 {
+			compatible = "snps,dwc3";
+			reg = <0x05200000 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_XHCI>,
+				 <&ccu CLK_BUS_XHCI>,
+				 <&rtc 0>;
+			clock-names = "ref", "bus_early", "suspend";
+			resets = <&ccu RST_BUS_XHCI>;
+			/*
+			 * The datasheet of the chip doesn't declare the
+			 * peripheral function, and there's no boards known
+			 * to have a USB Type-B port routed to the port.
+			 * In addition, no one has tested the peripheral
+			 * function yet.
+			 * So set the dr_mode to "host" in the DTSI file.
+			 */
+			dr_mode = "host";
+			phys = <&usb3phy>;
+			phy-names = "usb3-phy";
+			status = "disabled";
+		};
+
+		usb3phy: phy@5210000 {
+			compatible = "allwinner,sun50i-h6-usb3-phy";
+			reg = <0x5210000 0x10000>;
+			clocks = <&ccu CLK_USB_PHY1>;
+			resets = <&ccu RST_USB_PHY1>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usb2phy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usb2phy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		hdmi: hdmi@6000000 {
+			compatible = "allwinner,sun50i-h6-dw-hdmi";
+			reg = <0x06000000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+				 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+			clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+				      "hdcp-bus";
+			resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+			reset-names = "ctrl", "hdcp";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pins>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@6010000 {
+			compatible = "allwinner,sun50i-h6-hdmi-phy";
+			reg = <0x06010000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_HDMI>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		tcon_top: tcon-top@6510000 {
+			compatible = "allwinner,sun50i-h6-tcon-top";
+			reg = <0x06510000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>;
+			clock-names = "bus",
+				      "tcon-tv0";
+			clock-output-names = "tcon-top-tv0";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_tv: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv: lcd-controller@6515000 {
+			compatible = "allwinner,sun50i-h6-tcon-tv",
+				     "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x06515000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>,
+				 <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb",
+				      "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv_in: port@0 {
+					reg = <0>;
+
+					tcon_tv_in_tcon_top_mixer0: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
+					};
+				};
+
+				tcon_tv_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@7000000 {
+			compatible = "allwinner,sun50i-h6-rtc";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-h6-r-ccu";
+			reg = <0x07010000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_watchdog: watchdog@7020400 {
+			compatible = "allwinner,sun50i-h6-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x07020400 0x20>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		r_intc: interrupt-controller@7021000 {
+			compatible = "allwinner,sun50i-h6-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x07021000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-h6-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL9";
+				function = "s_cir_rx";
+			};
+		};
+
+		r_ir: ir@7040000 {
+				compatible = "allwinner,sun50i-h6-ir",
+					     "allwinner,sun6i-a31-ir";
+				reg = <0x07040000 0x400>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&r_ccu CLK_R_APB1_IR>,
+					 <&r_ccu CLK_IR>;
+				clock-names = "apb", "ir";
+				resets = <&r_ccu RST_R_APB1_IR>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&r_ir_rx_pin>;
+				status = "disabled";
+		};
+
+		r_i2c: i2c@7081400 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h6-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h616-orangepi-zero2.dts b/roms/u-boot/arch/arm/dts/sun50i-h616-orangepi-zero2.dts
new file mode 100644
index 000000000..e6de49f89
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h616-orangepi-zero2.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero2";
+	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
+
+	aliases {
+		ethernet0 = &emac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on headers only. */
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdce>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdce>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp305: pmic@745 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x745>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-sys";
+			};
+
+			reg_aldo2: aldo2 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext";
+			};
+
+			reg_aldo3: aldo3 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext2";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* reserved */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-mmc";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun50i-h616.dtsi b/roms/u-boot/arch/arm/dts/sun50i-h616.dtsi
new file mode 100644
index 000000000..dd4d2f311
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun50i-h616.dtsi
@@ -0,0 +1,738 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Arm Ltd.
+// based on the H6 dtsi, which is:
+//   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h616-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun50i-h616-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+	};
+
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-h616-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@28000 {
+				compatible = "mmio-sram";
+				reg = <0x00028000 0x30000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00028000 0x30000>;
+			};
+		};
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-h616-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		watchdog: watchdog@30090a0 {
+			compatible = "allwinner,sun50i-h616-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-h616-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ext_rgmii_pins: rgmii-pins {
+				pins = "PI0", "PI1", "PI2", "PI3", "PI4",
+				       "PI5", "PI7", "PI8", "PI9", "PI10",
+				       "PI11", "PI12", "PI13", "PI14", "PI15",
+				       "PI16";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PI6", "PI7";
+				function = "i2c0";
+			};
+
+			i2c3_ph_pins: i2c3-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c3";
+			};
+
+			ir_rx_pin: ir_rx_pin {
+				pins = "PH10";
+				function = "ir_rx";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1", "PC5", "PC6",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC13", "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC3", "PC4";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "spi1";
+			};
+
+			spi1_cs_pin: spi1-cs-pin {
+				pins = "PH5";
+				function = "spi1";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>,
+			      <0x03022000 0x2000>,
+			      <0x03024000 0x2000>,
+			      <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h616-mmc",
+				     "allwinner,sun50i-a100-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			mmc-ddr-1_8v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h616-mmc",
+				     "allwinner,sun50i-a100-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			mmc-ddr-1_8v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h616-emmc",
+				     "allwinner,sun50i-a100-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			mmc-ddr-1_8v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@5001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@5001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@5002c00 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@5003000 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05003000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h616-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h616-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac0: ethernet@5020000 {
+			compatible = "allwinner,sun50i-h616-emac",
+				     "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x05020000 0x10000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		emac1: ethernet@5030000 {
+			compatible = "allwinner,sun50i-h616-emac";
+			syscon = <&syscon 1>;
+			reg = <0x05030000 0x10000>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC1>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC1>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usbotg: usb@5100000 {
+			compatible = "allwinner,sun50i-h616-musb",
+				     "allwinner,sun8i-h3-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-h616-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x14>,
+			      <0x05200800 0x14>,
+			      <0x05310800 0x14>,
+			      <0x05311800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@5310000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05310000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_BUS_EHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>,
+				 <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@5310400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05310400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		rtc: rtc@7000000 {
+			compatible = "allwinner,sun50i-h616-rtc",
+				     "allwinner,sun50i-h6-rtc";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-h616-r-ccu";
+			reg = <0x07010000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-h616-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		ir: ir@7040000 {
+				compatible = "allwinner,sun50i-h616-ir",
+					     "allwinner,sun6i-a31-ir";
+				reg = <0x07040000 0x400>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&r_ccu CLK_R_APB1_IR>,
+					 <&r_ccu CLK_IR>;
+				clock-names = "apb", "ir";
+				resets = <&r_ccu RST_R_APB1_IR>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ir_rx_pin>;
+				status = "disabled";
+		};
+
+		r_i2c: i2c@7081400 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_rsb: rsb@7083000 {
+			compatible = "allwinner,sun50i-h616-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x07083000 0x400>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_R_APB2_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a10s-auxtek-t003.dts b/roms/u-boot/arch/arm/dts/sun5i-a10s-auxtek-t003.dts
new file mode 100644
index 000000000..39504d720
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a10s-auxtek-t003.dts
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Auxtek t003 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t003>;
+
+		red {
+			label = "t003-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_t003: mmc0_cd_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	led_pins_t003: led_pins@0 {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a10s-auxtek-t004.dts b/roms/u-boot/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
new file mode 100644
index 000000000..8d4fb9331
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Auxtek t004 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t004>;
+
+		red {
+			label = "t004-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+
+	reg_vmmc1: vmmc1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
+		regulator-name = "vmmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vmmc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-sdio-irq;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PG12";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
+		pins = "PB18";
+		function = "gpio_out";
+	};
+
+	led_pins_t004: led_pins@0 {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a10s-mk802.dts b/roms/u-boot/arch/arm/dts/sun5i-a10s-mk802.dts
new file mode 100644
index 000000000..dd7fd5c3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a10s-mk802.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802-A10s";
+	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_mk802>;
+
+		red {
+			label = "mk802:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_mk802: led_pins@0 {
+		pins = "PB2";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
+		pins = "PB10";
+		function = "gpio_out";
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_mk802>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/roms/u-boot/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
new file mode 100644
index 000000000..2c902ed2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
@@ -0,0 +1,308 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A10s-Olinuxino Micro";
+	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a10s-olinuxino-micro:green:usr";
+			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_b>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		reg = <0x30>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp152.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	at24@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+		read-only;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button@795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+		pins = "PG13";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		pins = "PE3";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+		pins = "PB10";
+		function = "gpio_out";
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PG12";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_b>,
+		    <&spi2_cs0_pins_b>;
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts b/roms/u-boot/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 000000000..034853d1c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "R7 A10s hdmi tv-stick";
+	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_r7>;
+
+		green {
+			label = "r7-tv-dongle:green:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	led_pins_r7: led_pins@0 {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+		pins = "PG13";
+		function = "gpio_out";
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_r7>;
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a10s-wobo-i5.dts b/roms/u-boot/arch/arm/dts/sun5i-a10s-wobo-i5.dts
new file mode 100644
index 000000000..3f68ef5d9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a10s-wobo-i5.dts
@@ -0,0 +1,221 @@
+/*
+ * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "A10s-Wobo i5";
+	compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_wobo_i5>;
+
+		blue {
+			label = "a10s-wobo-i5:blue:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_wobo>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_wobo_i5: led_pins@0 {
+		pins = "PB2";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
+		pins = "PB3";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	emac_power_pin_wobo: emac_power_pin@0 {
+		pins = "PA02";
+		function = "gpio_out";
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_ldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi2";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a10s.dtsi b/roms/u-boot/arch/arm/dts/sun5i-a10s.dtsi
new file mode 100644
index 000000000..316cb8b29
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a10s.dtsi
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>,
+				 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>,
+				 <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a10s-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc@1c00000 {
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun5i-a10s-ccu";
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a10s-pinctrl";
+
+	uart0_pins_a: uart0@0 {
+		pins = "PB19", "PB20";
+		function = "uart0";
+	};
+
+	uart2_pins_b: uart2@1 {
+		pins = "PC18", "PC19";
+		function = "uart2";
+	};
+
+	emac_pins_b: emac0@1 {
+		pins = "PA0", "PA1", "PA2",
+				"PA3", "PA4", "PA5", "PA6",
+				"PA7", "PA8", "PA9", "PA10",
+				"PA11", "PA12", "PA13", "PA14",
+				"PA15", "PA16";
+		function = "emac";
+	};
+
+	mmc1_pins_a: mmc1@0 {
+		pins = "PG3", "PG4", "PG5",
+				 "PG6", "PG7", "PG8";
+		function = "mmc1";
+		drive-strength = <30>;
+	};
+
+	spi2_pins_b: spi2@1 {
+		pins = "PB12", "PB13", "PB14";
+		function = "spi2";
+	};
+
+	spi2_cs0_pins_b: spi2_cs0@1 {
+		pins = "PB11";
+		function = "spi2";
+	};
+};
+
+&sram_a {
+};
+
+&tcon0_out {
+	tcon0_out_hdmi: endpoint@2 {
+		reg = <2>;
+		remote-endpoint = <&hdmi_in_tcon0>;
+		allwinner,tcon-channel = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-ampe-a76.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-ampe-a76.dts
new file mode 100644
index 000000000..1bf88816c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-ampe-a76.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Ampe A76 for u-boot only
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+
+/ {
+	model = "Ampe A76";
+	compatible = "ampe,a76", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts
new file mode 100644
index 000000000..894c4c4f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Difrnce DIT4350";
+	compatible = "difrnce,dit4350", "allwinner,sun5i-a13";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
new file mode 100644
index 000000000..378214d83
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Empire Electronix D709 tablet";
+	compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_d709: mmc0_cd_pin@0 {
+		pins = "PG0";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PG2";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-empire-electronix-m712.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-empire-electronix-m712.dts
new file mode 100644
index 000000000..b1e2afd9d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-empire-electronix-m712.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Empire Electronix M712 tablet";
+	compatible = "empire-electronix,m712", "allwinner,sun5i-a13";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-hsg-h702.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-hsg-h702.dts
new file mode 100644
index 000000000..7ee0c3f6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-hsg-h702.dts
@@ -0,0 +1,211 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "HSG H702";
+	compatible = "hsg,h702", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
+		pins = "PG0";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PG2";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-inet-86vs.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-inet-86vs.dts
new file mode 100644
index 000000000..aef733b3f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-inet-86vs.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the iNet 86VS for u-boot only
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+
+/ {
+	model = "iNet 86VS";
+	compatible = "inet,86vs", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
new file mode 100644
index 000000000..439ae3b53
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-98V Rev 02";
+	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-olinuxino-micro.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 000000000..aa4b34fd9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		power {
+			label = "a13-olinuxino-micro:green:power";
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+		pins = "PG0";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	led_pins_olinuxinom: led_pins@0 {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PG2";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+
+	usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 {
+		pins = "PG12";
+		function = "gpio_out";
+	};
+
+	usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
+		pins = "PG11";
+		function = "gpio_out";
+	};
+};
+
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_olinuxinom>;
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-olinuxino.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-olinuxino.dts
new file mode 100644
index 000000000..437ad913a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-olinuxino.dts
@@ -0,0 +1,283 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A13-Olinuxino";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		power {
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	bridge {
+		compatible = "dumb-vga-dac";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button@795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+		pins = "PG0";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PG2";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+
+	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
+		pins = "PG11";
+		function = "gpio_out";
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-q8-tablet.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-q8-tablet.dts
new file mode 100644
index 000000000..a89f29fa3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-q8-tablet.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Q8 A13 Tablet";
+	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+
+	panel: panel {
+		compatible = "urt,umsh-8596md-t", "simple-panel";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			/* TODO: lcd panel uses axp gpio0 as enable pin */
+			backlight = <&backlight>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13-utoo-p66.dts b/roms/u-boot/arch/arm/dts/sun5i-a13-utoo-p66.dts
new file mode 100644
index 000000000..bfdd38d6b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13-utoo-p66.dts
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Utoo P66";
+	compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+	/* The P66 uses the uart pins as gpios */
+	aliases {
+		/delete-property/serial0;
+	};
+
+	chosen {
+		/delete-property/stdout-path;
+	};
+
+	i2c_lcd: i2c@0 {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_lcd_pins>;
+		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
+			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&backlight {
+	/* Note levels of 10 / 20% result in backlight off */
+	brightness-levels = <0 30 40 50 60 70 80 90 100>;
+	default-brightness-level = <6>;
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
+};
+
+&codec_pa_pin {
+	pins = "PG3";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&pio {
+	i2c_lcd_pins: i2c_lcd_pin@0 {
+		pins = "PG10", "PG12";
+		function = "gpio_out";
+		bias-pull-up;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+};
+
+&touchscreen {
+	compatible = "chipone,icn8318";
+	reg = <0x40>;
+	/* The P66 uses a different EINT then the reference design */
+	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	touchscreen-size-x = <800>;
+	touchscreen-size-y = <480>;
+	touchscreen-inverted-x;
+	touchscreen-swapped-x-y;
+	status = "okay";
+};
+
+&uart1 {
+	/* The P66 uses the uart pins as gpios */
+	status = "disabled";
+};
+
+&usb0_vbus_pin_a {
+	pins = "PB4";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-a13.dtsi b/roms/u-boot/arch/arm/dts/sun5i-a13.dtsi
new file mode 100644
index 000000000..b1d827765
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-a13.dtsi
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc@1c00000 {
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a13-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun5i-a13-ccu";
+};
+
+&cpu0 {
+	clock-latency = <244144>; /* 8 32k periods */
+	operating-points = <
+		/* kHz	  uV */
+		1008000 1400000
+		912000	1350000
+		864000	1300000
+		624000	1200000
+		576000	1200000
+		432000	1200000
+		>;
+	#cooling-cells = <2>;
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a13-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-gr8-chip-pro.dts b/roms/u-boot/arch/arm/dts/sun5i-gr8-chip-pro.dts
new file mode 100644
index 000000000..c55b11a4d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-gr8-chip-pro.dts
@@ -0,0 +1,262 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P. Pro";
+	compatible = "nextthing,chip-pro", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip-pro:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "disabled";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	status = "disabled";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_pin_chip_pro: usb0-id-pin@0 {
+		pins = "PG2";
+		function = "gpio_in";
+	};
+
+	wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
+		pins = "PB10";
+		function = "gpio_out";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>;
+	status = "disabled";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the
+ * WiFi/BT chip.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The CHIP Pro doesn't have a controllable VBUS, nor does it
+	 * have any 5v rail on the board itself.
+	 *
+	 * If one wants to use it as a true OTG port, it should be
+	 * done in the baseboard, and its DT / overlay will add it.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pin_chip_pro>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-gr8.dtsi b/roms/u-boot/arch/arm/dts/sun5i-gr8.dtsi
new file mode 100644
index 000000000..ef0b7446a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-gr8.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2016 Mylène Josserand
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+/ {
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc@1c00000 {
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "nextthing,gr8-ccu";
+};
+
+&pio {
+	compatible = "nextthing,gr8-pinctrl";
+
+	i2s0_data_pins_a: i2s0-data@0 {
+		pins = "PB6", "PB7", "PB8", "PB9";
+		function = "i2s0";
+	};
+
+	i2s0_mclk_pins_a: i2s0-mclk@0 {
+		pins = "PB5";
+		function = "i2s0";
+	};
+
+	pwm1_pins: pwm1 {
+		pins = "PG13";
+		function = "pwm1";
+	};
+
+	spdif_tx_pins_a: spdif@0 {
+		pins = "PB10";
+		function = "spdif";
+		bias-pull-up;
+	};
+
+	uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+		pins = "PG5", "PG6";
+		function = "uart1";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-q8-common.dtsi b/roms/u-boot/arch/arm/dts/sun5i-q8-common.dtsi
new file mode 100644
index 000000000..a78e189f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-q8-common.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-q8-common.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-r8-chip.dts b/roms/u-boot/arch/arm/dts/sun5i-r8-chip.dts
new file mode 100644
index 000000000..879a4b0f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-r8-chip.dts
@@ -0,0 +1,314 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-r8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P.";
+	compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart3;
+		spi0 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&chip_wifi_reg_on_pin>;
+		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&chip_w1_pin>;
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		 * The interrupt is routed through the "External Fast
+		 * Interrupt Request" pin (ball G13 of the module)
+		 * directly to the main interrupt controller, without
+		 * any other controller interfering.
+		 */
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	xio: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		reg = <0x38>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmc0_pins_a {
+	bias-pull-up;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	chip_vbus_pin: chip_vbus_pin@0 {
+		pins = "PB10";
+		function = "gpio_out";
+	};
+
+	chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
+	        pins = "PC19";
+	        function = "gpio_out";
+	};
+
+	chip_id_det_pin: chip_id_det_pin@0 {
+		pins = "PG2";
+		function = "gpio_in";
+	};
+
+	chip_w1_pin: chip_w1_pin@0 {
+		pins = "PD2";
+		function = "gpio_in";
+	        bias-pull-up;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "cpuvdd";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "corevdd";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "rtcvdd";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT
+ * Chip.
+ *
+ * If those are not enabled, the SDIO part will not enumerate, and
+ * since there's no way currently to pass DT infos to an SDIO device,
+ * we cannot really do better than this ugly hack for now.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&reg_ldo5 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_usb0_vbus {
+	pinctrl-0 = <&chip_vbus_pin>;
+	vin-supply = <&reg_vcc5v0>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "disabled";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>,
+		    <&uart3_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&chip_id_det_pin>;
+	status = "okay";
+
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i-r8.dtsi b/roms/u-boot/arch/arm/dts/sun5i-r8.dtsi
new file mode 100644
index 000000000..de35dbcd1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-r8.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i-a13.dtsi"
+
diff --git a/roms/u-boot/arch/arm/dts/sun5i-reference-design-tablet.dtsi b/roms/u-boot/arch/arm/dts/sun5i-reference-design-tablet.dtsi
new file mode 100644
index 000000000..8acbaab14
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i-reference-design-tablet.dtsi
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * All other devices on this bus are also rated for 400KHz.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen {
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_power_pin>;
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	codec_pa_pin: codec_pa_pin@0 {
+		pins = "PG10";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin: mmc0_cd_pin@0 {
+		pins = "PG0";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	ts_power_pin: ts_power_pin {
+		pins = "PB3";
+		function = "gpio_out";
+		drive-strength = <10>;
+		bias-disable;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PG2";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		pins = "PG12";
+		function = "gpio_out";
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun5i.dtsi b/roms/u-boot/arch/arm/dts/sun5i.dtsi
new file mode 100644
index 000000000..07f2248ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun5i.dtsi
@@ -0,0 +1,741 @@
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
+				 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk@1c20050 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	soc@1c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+			};
+
+			emac_sram: sram-section@8000 {
+				compatible = "allwinner,sun4i-a10-sram-a3-a4";
+				reg = <0x8000 0x4000>;
+				status = "disabled";
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tve0: tv-encoder@1c0a000 {
+			compatible = "allwinner,sun4i-a10-tv-encoder";
+			reg = <0x01c0a000 0x1000>;
+			clocks = <&ccu CLK_AHB_TVE>;
+			resets = <&ccu RST_TVE>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tve0_in_tcon0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_tve0>;
+				};
+			};
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&ccu RST_LCD>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD>,
+				 <&ccu CLK_TCON_CH0>,
+				 <&ccu CLK_TCON_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_tve0: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tve0_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun5i-a13-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <54>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			emac_pins_a: emac0@0 {
+				pins = "PD6", "PD7", "PD10",
+				       "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD18", "PD19", "PD20",
+				       "PD21", "PD22", "PD23", "PD24",
+				       "PD25", "PD26", "PD27";
+				function = "emac";
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				pins = "PB15", "PB16";
+				function = "i2c1";
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				pins = "PB17", "PB18";
+				function = "i2c2";
+			};
+
+			ir0_rx_pins_a: ir0@0 {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			lcd_rgb565_pins: lcd_rgb565@0 {
+				pins = "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			lcd_rgb666_pins: lcd_rgb666@0 {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_4bit_pins_a: mmc2-4bit@0 {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins_a: nand-base0@0 {
+				pins = "PC0", "PC1", "PC2",
+				       "PC5", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14",
+				       "PC15";
+				function = "nand0";
+			};
+
+			nand_cs0_pins_a: nand-cs@0 {
+				pins = "PC4";
+				function = "nand0";
+			};
+
+			nand_rb0_pins_a: nand-rb@0 {
+				pins = "PC6";
+				function = "nand0";
+			};
+
+			spi2_pins_a: spi2@0 {
+				pins = "PE1", "PE2", "PE3";
+				function = "spi2";
+			};
+
+			spi2_cs0_pins_a: spi2-cs0@0 {
+				pins = "PE0";
+				function = "spi2";
+			};
+
+			uart1_pins_a: uart1@0 {
+				pins = "PE10", "PE11";
+				function = "uart1";
+			};
+
+			uart1_pins_b: uart1@1 {
+				pins = "PG3", "PG4";
+				function = "uart1";
+			};
+
+			uart2_pins_a: uart2@0 {
+				pins = "PD2", "PD3";
+				function = "uart2";
+			};
+
+			uart2_cts_rts_pins_a: uart2-cts-rts@0 {
+				pins = "PD4", "PD5";
+				function = "uart2";
+			};
+
+			uart3_pins_a: uart3@0 {
+				pins = "PG9", "PG10";
+				function = "uart3";
+			};
+
+			uart3_cts_rts_pins_a: uart3-cts-rts@0 {
+				pins = "PG11", "PG12";
+				function = "uart3";
+			};
+
+			pwm0_pins: pwm0 {
+				pins = "PB2";
+				function = "pwm";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&ccu CLK_HOSC>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@1c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE>;
+			status = "disabled";
+
+			assigned-clocks = <&ccu CLK_DE_BE>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31-app4-evb1.dts b/roms/u-boot/arch/arm/dts/sun6i-a31-app4-evb1.dts
new file mode 100644
index 000000000..7f34323a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&pio {
+	usb1_vbus_pin_a: usb1_vbus_pin@0 {
+		pins = "PH27";
+		function = "gpio_out";
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_a>;
+	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31-colombus.dts b/roms/u-boot/arch/arm/dts/sun6i-a31-colombus.dts
new file mode 100644
index 000000000..939c497a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31-colombus.dts
@@ -0,0 +1,163 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "WITS A31 Colombus Evaluation Board";
+	compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c_lcd: i2c@0 {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_lcd_pins>;
+		gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
+			<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "fail";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	bias-pull-up;
+};
+
+&pio {
+	mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+		pins = "PA8";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+		pins = "PH24";
+		function = "gpio_out";
+	};
+
+	i2c_lcd_pins: i2c_lcd_pin@0 {
+		pins = "PA23", "PA24";
+		function = "gpio_out";
+		bias-pull-up;
+	};
+};
+
+&reg_usb2_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_vbus_pin_colombus>;
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31-hummingbird.dts b/roms/u-boot/arch/arm/dts/sun6i-a31-hummingbird.dts
new file mode 100644
index 000000000..ce4f9e983
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31-hummingbird.dts
@@ -0,0 +1,377 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Merrii A31 Hummingbird";
+	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "dumb-vga-dac";
+		vdd-supply = <&reg_vga_3v3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_dac_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_dac_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	reg_vga_3v3: vga_3v3_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vga-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",	"MBIAS",
+		"Headset Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	/* pull-ups and devices require AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	/* external pull-ups missing for some pins */
+	bias-pull-up;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
+		pins = "PA21";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+		pins = "PA8";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
+		pins = "PG10";
+		function = "gpio_out";
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31-i7.dts b/roms/u-boot/arch/arm/dts/sun6i-a31-i7.dts
new file mode 100644
index 000000000..d659be9db
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31-i7.dts
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele I7 Quad top set box";
+	compatible = "mele,i7", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_i7>;
+
+		blue {
+			label = "i7:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&pio {
+	led_pins_i7: led_pins@0 {
+		pins = "PH13";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin_i7: mmc0_cd_pin@0 {
+		pins = "PH22";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb1_vbus_pin_i7: usb1_vbus_pin@0 {
+		pins = "PC27";
+		function = "gpio_out";
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_i7>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_pins_a>;
+	spdif-out = "okay";
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31-m9.dts b/roms/u-boot/arch/arm/dts/sun6i-a31-m9.dts
new file mode 100644
index 000000000..9698f6d38
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31-m9.dts
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele M9 top set box";
+	compatible = "mele,m9", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m9>;
+
+		blue {
+			label = "m9:blue:pwr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&pio {
+	led_pins_m9: led_pins@0 {
+		pins = "PH13";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+		pins = "PH22";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+		pins = "PC27";
+		function = "gpio_out";
+	};
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_m9>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts b/roms/u-boot/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
new file mode 100644
index 000000000..bb14b171b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -0,0 +1,239 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele A1000G Quad top set box";
+	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m9>;
+
+		blue {
+			label = "a1000g:blue:pwr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&pio {
+	led_pins_m9: led_pins@0 {
+		pins = "PH13";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+		pins = "PH22";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+		pins = "PC27";
+		function = "gpio_out";
+	};
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_m9>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31-mixtile-loftq.dts b/roms/u-boot/arch/arm/dts/sun6i-a31-mixtile-loftq.dts
new file mode 100644
index 000000000..32ab9751c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31-mixtile-loftq.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Mixtile LOFT-Q for u-boot only
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+
+/ {
+	model = "Mixtile LOFT-Q";
+	compatible = "mixtile,loft-q", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31.dtsi b/roms/u-boot/arch/arm/dts/sun6i-a31.dtsi
new file mode 100644
index 000000000..c72992556
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31.dtsi
@@ -0,0 +1,1371 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_hdmi: framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
+				 <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		simplefb_lcd: framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun6i-a31";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk@1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk@2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c200d0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c200d0 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun6i-a31-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc@1c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun6i-a31-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DMA>;
+			resets = <&ccu RST_AHB1_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_AHB1_LCD0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_LCD0_CH0>,
+				 <&ccu CLK_LCD0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+
+					tcon0_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_AHB1_LCD1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB1_LCD1>,
+				 <&ccu CLK_LCD1_CH0>,
+				 <&ccu CLK_LCD1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon1>;
+					};
+
+					tcon1_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun6i-a31-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+			resets = <&ccu RST_AHB1_HDMI>;
+			reset-names = "ahb";
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_AHB1_OTG>;
+			resets = <&ccu RST_AHB1_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun6i-a31-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_EHCI0>;
+			resets = <&ccu RST_AHB1_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_AHB1_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_EHCI1>;
+			resets = <&ccu RST_AHB1_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_AHB1_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_AHB1_OHCI2>;
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun6i-a31-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_pins_gmii_a: gmac_gmii@0 {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				drive-strength = <30>;
+			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				function = "gmac";
+			};
+
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				pins = "PH14", "PH15";
+				function = "i2c0";
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				pins = "PH16", "PH17";
+				function = "i2c1";
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				pins = "PH18", "PH19";
+				function = "i2c2";
+			};
+
+			lcd0_rgb888_pins: lcd0_rgb888 {
+				pins = "PD0", "PD1", "PD2", "PD3",
+						 "PD4", "PD5", "PD6", "PD7",
+						 "PD8", "PD9", "PD10", "PD11",
+						 "PD12", "PD13", "PD14", "PD15",
+						 "PD16", "PD17", "PD18", "PD19",
+						 "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2@1 {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc3_8bit_emmc_pins: mmc3@1 {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				function = "mmc3";
+				drive-strength = <40>;
+				bias-pull-up;
+			};
+
+			spdif_pins_a: spdif@0 {
+				pins = "PH28";
+				function = "spdif";
+			};
+
+			uart0_pins_a: uart0@0 {
+				pins = "PH20", "PH21";
+				function = "uart0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt1: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_APB1_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>;
+			resets = <&ccu RST_APB1_DAUDIO0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>;
+			resets = <&ccu RST_APB1_DAUDIO1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun6i-a31-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART0>;
+			resets = <&ccu RST_APB2_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART1>;
+			resets = <&ccu RST_APB2_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART2>;
+			resets = <&ccu RST_APB2_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART3>;
+			resets = <&ccu RST_APB2_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART4>;
+			resets = <&ccu RST_APB2_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART5>;
+			resets = <&ccu RST_APB2_UART5>;
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C0>;
+			resets = <&ccu RST_APB2_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C1>;
+			resets = <&ccu RST_APB2_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C2>;
+			resets = <&ccu RST_APB2_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C3>;
+			resets = <&ccu RST_APB2_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@1c30000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c30000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_AHB1_EMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun6i-a31-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_AHB1_SS>;
+			reset-names = "ahb";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_APB1_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		timer@1c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer",
+				     "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HSTIMER>;
+			resets = <&ccu RST_AHB1_HSTIMER>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI1>;
+			status = "disabled";
+		};
+
+		spi2: spi@1c6a000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6a000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 25>, <&dma 25>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI2>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c6b000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6b000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 26>, <&dma 26>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI3>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>,
+				 <&ccu CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>,
+				 <&ccu CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>,
+				 <&ccu CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE1>;
+
+			assigned-clocks = <&ccu CLK_BE1>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@1e50000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e50000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>,
+				 <&ccu CLK_DRAM_DRC1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC1>;
+
+			assigned-clocks = <&ccu CLK_IEP_DRC1>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc1>;
+					};
+
+					drc1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE0>;
+
+			assigned-clocks = <&ccu CLK_BE0>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_DRAM_DRC0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC0>;
+
+			assigned-clocks = <&ccu CLK_IEP_DRC0>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+
+					drc0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc0>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nmi_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun6i-a31-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "allwinner,sun6i-a31-ar100-clk";
+				#clock-cells = <0>;
+				clocks = <&osc32k>, <&osc24M>,
+					 <&ccu CLK_PLL_PERIPH>,
+					 <&ccu CLK_PLL_PERIPH>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun6i-a31-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_ir",
+						"apb0_timer", "apb0_p2wi",
+						"apb0_uart", "apb0_1wire",
+						"apb0_i2c";
+			};
+
+			ir_clk: ir_clk {
+				#clock-cells = <0>;
+				compatible = "allwinner,sun4i-a10-mod0-clk";
+				clocks = <&osc32k>, <&osc24M>;
+				clock-output-names = "ir";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun6i-a31-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_rst 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun6i-a31-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			ir_pins_a: ir@0 {
+				pins = "PL4";
+				function = "s_ir";
+			};
+
+			p2wi_pins: p2wi {
+				pins = "PL0", "PL1";
+				function = "s_p2wi";
+			};
+		};
+
+		p2wi: i2c@1f03400 {
+			compatible = "allwinner,sun6i-a31-p2wi";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <100000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&p2wi_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts b/roms/u-boot/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts
new file mode 100644
index 000000000..882a4d89f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Colorfly E708 Q1 tablet";
+	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pg";
+};
+
+&simplefb_lcd {
+	vcc-pg-supply = <&reg_dldo2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s-cs908.dts b/roms/u-boot/arch/arm/dts/sun6i-a31s-cs908.dts
new file mode 100644
index 000000000..75e578159
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s-cs908.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+/ {
+	model = "CSQ CS908 top set box";
+	compatible = "csq,cs908", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s-inet-q972.dts b/roms/u-boot/arch/arm/dts/sun6i-a31s-inet-q972.dts
new file mode 100644
index 000000000..e584e6b18
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s-inet-q972.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "iNet Q972 tablet";
+	compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@900 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <900000>;
+	};
+
+	button@1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s-primo81.dts b/roms/u-boot/arch/arm/dts/sun6i-a31s-primo81.dts
new file mode 100644
index 000000000..4cb9664cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s-primo81.dts
@@ -0,0 +1,289 @@
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ * Copyright 2015 Karsten Merker <merker@debian.org>
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MSI Primo81 tablet";
+	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* rtl8188etv wifi is connected here */
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	/* pull-ups and device VDDIO use AXP221 DLDO3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "failed";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	ctp@5d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&gt911_int_primo81>;
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	accelerometer@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mma8452_int_primo81>;
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
+		#io-channel-cells = <1>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&pio {
+	gt911_int_primo81: gt911_int_pin@0 {
+		pins = "PA3";
+		function = "gpio_in";
+	};
+
+	mma8452_int_primo81: mma8452_int_pin@0 {
+		pins = "PA9";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
+		pins = "PA8";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-mipi-bridge";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+	vdd-mipi-bridge-supply = <&reg_eldo3>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi b/roms/u-boot/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
new file mode 100644
index 000000000..d7325bc4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinlinx SinA31s Core Board";
+	compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+/* eMMC on core board */
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+/* AXP221s PMIC on core board */
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* UART0 pads available on core board */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s-sina31s.dts b/roms/u-boot/arch/arm/dts/sun6i-a31s-sina31s.dts
new file mode 100644
index 000000000..da0ccf5a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s-sina31s.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The SinA31s development board has the SinA31s core board soldered on */
+#include "sun6i-a31s-sina31s-core.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA31s Development Board";
+	compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_sina31s>;
+
+		status {
+			label = "sina31s:status:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",	"MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* USB 2.0 4 port hub IC */
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pin_sina31s: led_pin@0 {
+		pins = "PH13";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
+		pins = "PA4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/roms/u-boot/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644
index 000000000..b8b79c0e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinovoip BPI-M2";
+	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bpi_m2>;
+
+		blue {
+			label = "bpi-m2:blue:usr";
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		green {
+			label = "bpi-m2:green:usr";
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+		};
+
+		red {
+			label = "bpi-m2:red:usr";
+			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+		};
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
+	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2_pins_a {
+	bias-pull-up;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+&pio {
+	gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
+		pins = "PA21";
+		function = "gpio_out";
+	};
+
+	led_pins_bpi_m2: led_pins@0 {
+		pins = "PG5", "PG10", "PG11";
+		function = "gpio_out";
+	};
+
+	mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
+		pins = "PA4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&r_pio {
+	mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
+		pins = "PL8";
+		function = "gpio_out";
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/roms/u-boot/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
new file mode 100644
index 000000000..aab6c1720
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Yones TopTech BS1078 v2 Tablet";
+	compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
+		pins = "PA8";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	bias-pull-up;
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd-usb2";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	usb2_vbus-supply = <&reg_dc1sw>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-a31s.dtsi b/roms/u-boot/arch/arm/dts/sun6i-a31s.dtsi
new file mode 100644
index 000000000..97e2c51d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-a31s.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The A31s is the same die as the A31 in a different package, this is
+ * reflected by it having different pinctrl compatible everything else is
+ * identical.
+ */
+
+#include "sun6i-a31.dtsi"
+
+&de {
+	compatible = "allwinner,sun6i-a31s-display-engine";
+};
+
+&pio {
+	compatible = "allwinner,sun6i-a31s-pinctrl";
+};
+
+&tcon0 {
+	compatible = "allwinner,sun6i-a31s-tcon";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun6i-reference-design-tablet.dtsi b/roms/u-boot/arch/arm/dts/sun6i-reference-design-tablet.dtsi
new file mode 100644
index 000000000..4e72e4f3e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun6i-reference-design-tablet.dtsi
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* Wifi is connected here */
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
+		pins = "PA8";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PA15";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-ainol-aw1.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-ainol-aw1.dts
new file mode 100644
index 000000000..5914c919d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-ainol-aw1.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Ainol AW1 for u-boot only
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+
+/ {
+	model = "Ainol AW1";
+	compatible = "ainol,aw1", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
new file mode 100644
index 000000000..e2bfe0058
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -0,0 +1,262 @@
+/*
+ * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
+ *
+ * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Banana Pi BPI-M1-Plus";
+	compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "bananapi-m1-plus:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "bananapi-m1-plus:pwr:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-bananapi.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-bananapi.dts
new file mode 100644
index 000000000..81bc85d39
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-bananapi.dts
@@ -0,0 +1,340 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LeMaker Banana Pi";
+	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "bananapi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	operating-points = <
+		/* kHz	  uV */
+		960000	1400000
+		912000	1400000
+		864000	1350000
+		720000	1250000
+		528000	1150000
+		312000	1100000
+		144000	1050000
+		>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+	gpio-line-names =
+		/* PA */
+		"ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
+			"ETXD2", "ETXD1", "ETXD0",
+		"ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
+			"ETXEN", "ETXCK", "ECRS",
+		"ECOL", "ETXERR", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PB */
+		"PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
+		"", "USB0-DRV", "", "", "", "", "", "",
+		"", "", "", "", "SCL", "SDA", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PC */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PE */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PF */
+		"SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
+			"SD0-D2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PG */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PH */
+		"TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
+		"", "", "SD0-DET", "", "", "", "", "",
+		"", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
+		"LED1", "", "", "", "", "", "", "",
+		/* PI */
+		"", "", "", "IO-GCLK", "", "", "", "",
+		"", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
+			"SPI-MISO", "SPI-CE1", "",
+		"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-bananapro.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-bananapro.dts
new file mode 100644
index 000000000..0176e9de0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-bananapro.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LeMaker Banana Pro";
+	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bananapro:blue:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "bananapro:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-cubieboard2.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-cubieboard2.dts
new file mode 100644
index 000000000..200685b0b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,245 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-cubietruck.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-cubietruck.dts
new file mode 100644
index 000000000..99f531b8d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		white {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	/* Pin outputs low power clock for WiFi and BT */
+	pinctrl-0 = <&clk_out_a_pin>;
+	pinctrl-names = "default";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+		host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+		shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-hummingbird.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-hummingbird.dts
new file mode 100644
index 000000000..fd0153f65
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-hummingbird.dts
@@ -0,0 +1,232 @@
+/*
+ * Copyright 2013 Wills Wang
+ *
+ * Wills Wang <wills.wang.open@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Merrii A20 Hummingbird";
+	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_mmc3_vdd: mmc3_vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc3_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	};
+
+	reg_gmac_vdd: gmac_vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_vdd>;
+	/* phy reset config */
+	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+	snps,reset-active-low;
+	/* wait 1s after reset, otherwise fail to read phy id */
+	snps,reset-delays-us = <0 10000 1000000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_mmc3_vdd>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-i12-tvbox.dts
new file mode 100644
index 000000000..5f1c4f573
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-i12-tvbox.dts
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "I12 / Q5 / QT840A A20 tvbox";
+	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "i12_tvbox:red:usr";
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			label = "i12_tvbox:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3_io: vmmc3-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc3-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* This controls VCC-PI, must be always on! */
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-icnova-swac.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-icnova-swac.dts
new file mode 100644
index 000000000..949494730
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-icnova-swac.dts
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2015 Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "ICnova-A20 SWAC";
+	compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-itead-ibox.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-itead-ibox.dts
new file mode 100644
index 000000000..b90a7607d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-itead-ibox.dts
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Itead Ibox A20";
+	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_itead_core>;
+
+		green {
+			label = "itead_core:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		blue {
+			label = "itead_core:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&pio {
+	led_pins_itead_core: led-pins {
+		pins = "PH20","PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-lamobo-r1.dts
new file mode 100644
index 000000000..f91e1bee4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-lamobo-r1.dts
@@ -0,0 +1,332 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Lamobo R1";
+	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "lamobo_r1:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: ethernet-switch@1e {
+			compatible = "brcm,bcm53125";
+			reg = <30>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					label = "lan2";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					label = "lan4";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					label = "wan";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					label = "lan1";
+				};
+
+				port8: port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&gmac>;
+					phy-mode = "rgmii-txid";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-m3.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-m3.dts
new file mode 100644
index 000000000..b8a1aaaf3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-m3.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Mele M3";
+	compatible = "mele,m3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "m3:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-m5.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-m5.dts
new file mode 100644
index 000000000..6de52c7c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-m5.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Mele M5 for u-boot only
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+
+/ {
+	model = "Mele M5";
+	compatible = "mele,m5", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-mk808c.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-mk808c.dts
new file mode 100644
index 000000000..1491c603f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-mk808c.dts
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2015 Marcus Cooper
+ *
+ * Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "mk808c";
+	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+	remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 000000000..20bf09b22
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
new file mode 100644
index 000000000..f0e6a96e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
@@ -0,0 +1,327 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ * Copyright 2015 - Karsten Merker <merker@debian.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-Olimex-SOM-EVB";
+	compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "a20-olimex-som-evb:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button-1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button-1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olimex_som_evb: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pi_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts
new file mode 100644
index 000000000..a59755a2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som204-evb.dts"
+
+/ {
+	model = "Olimex A20-SOM204-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
new file mode 100644
index 000000000..823aabce0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A20-SOM204-EVB";
+	compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		ethernet1 = &rtl8723bs;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		stat {
+			label = "a20-som204-evb:green:stat";
+			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led1 {
+			label = "a20-som204-evb:green:led1";
+			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led2 {
+			label = "a20-som204-evb:yellow:led2";
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtl_pwrseq: rtl_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy3>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_vcc3v3>;
+
+	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Exposed to UEXT1 */
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* Exposed to UEXT2 */
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&rtl_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	uart3_rts_pin: uart3-rts-pin {
+		pins = "PG8";
+		function = "uart3";
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Used for RTL8723BS bluetooth */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
new file mode 100644
index 000000000..5e411194b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,228 @@
+/*
+ * This is based on sun4i-a10-olinuxino-lime.dts
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME";
+	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts
new file mode 100644
index 000000000..decb014a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -0,0 +1,69 @@
+ /*
+ * Copyright 2015 - Ultimaker B.V.
+ * Author Olliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-lime2.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2-eMMC";
+	compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
new file mode 100644
index 000000000..4e1c590eb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
@@ -0,0 +1,278 @@
+/*
+ * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2";
+	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime2:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_axp_ipsout: axp_ipsout {
+		compatible = "regulator-fixed";
+		regulator-name = "axp-ipsout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi0";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi1";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts
new file mode 100644
index 000000000..2337b44a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts
@@ -0,0 +1,68 @@
+ /*
+ * Copyright 2017 Olimex Ltd.
+ * Stefan Mavrodiev <stefan@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-micro.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-MICRO-eMMC";
+	compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 000000000..840ae1194
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,366 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-Olinuxino Micro";
+	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart6;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+
+	button-1184 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1184678>;
+	};
+
+	button-1398 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1398804>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+
+	led_pins_olinuxino: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pi_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-orangepi-mini.dts
new file mode 100644
index 000000000..15881081c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-orangepi-mini.dts
@@ -0,0 +1,250 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Orange Pi Mini";
+	compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+
+		blue {
+			label = "orangepi:blue:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-orangepi.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-orangepi.dts
new file mode 100644
index 000000000..d64de2e73
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-orangepi.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Orange Pi";
+	compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
new file mode 100644
index 000000000..538ea15fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2015 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LinkSprite pcDuino3 Nano";
+	compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* Marked "LED3" on the PCB. */
+		usr1 {
+			label = "pcduino3-nano:green:usr1";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+
+		/* Marked "LED4" on the PCB. */
+		usr2 {
+			label = "pcduino3-nano:green:usr2";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+/* A single regulator (U24) powers both USB host ports. */
+&reg_usb1_vbus {
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-pcduino3.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-pcduino3.dts
new file mode 100644
index 000000000..a72ed4318
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LinkSprite pcDuino3";
+	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		tx {
+			label = "pcduino3:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino3:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		back {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		home {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		menu {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-primo73.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-primo73.dts
new file mode 100644
index 000000000..ac0175f79
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-primo73.dts
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@xxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "MSI Primo73 tablet";
+	compatible = "msi,primo73", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 0>; /* PH12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
new file mode 100644
index 000000000..ffade253d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Wexler TAB7200";
+	compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	gt911: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi b/roms/u-boot/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi
new file mode 100644
index 000000000..8a1c4681d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "sunxi-u-boot.dtsi"
+
+&ahci {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
new file mode 100644
index 000000000..c27e56091
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wits Pro A20 DKT";
+	compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts b/roms/u-boot/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts
new file mode 100644
index 000000000..11142ae6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Yones Toptech BD1078 for u-boot only
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+
+/ {
+	model = "Yones Toptech BD1078";
+	compatible = "yones,toptech-bd1078", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun7i-a20.dtsi b/roms/u-boot/arch/arm/dts/sun7i-a20.dtsi
new file mode 100644
index 000000000..641a8fa6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun7i-a20.dtsi
@@ -0,0 +1,1514 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+				 <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+				 <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				960000	1400000
+				912000	1400000
+				864000	1300000
+				720000	1200000
+				528000	1100000
+				312000	1000000
+				144000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				960000	1400000
+				912000	1400000
+				864000	1300000
+				720000	1200000
+				528000	1100000
+				312000	1000000
+				144000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x4a000000 0x6000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk-mii-phy-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk-gmac-int-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c20164 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c20164 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+
+	de: display-engine {
+		compatible = "allwinner,sun7i-a20-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun7i-a20-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun7i-a20-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <4>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun7i-a20-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun7i-a20-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun7i-a20-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun7i-a20-hdmi",
+				     "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun7i-a20-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			clk_out_b_pin: clk-out-b-pin {
+				pins = "PI13";
+				function = "clk_out_b";
+			};
+
+			emac_pa_pins: emac-pa-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			gmac_mii_pins: gmac-mii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "gmac";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				        "PA7", "PA8", "PA10",
+				       "PA11", "PA12", "PA13",
+				       "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			ir0_rx_pin: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir0_tx_pin: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			ir1_rx_pin: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			ir1_tx_pin: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC6", "PC7", "PC8",
+				       "PC9", "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			ps2_0_pins: ps2-0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			ps2_1_ph_pins: ps2-1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			spi0_cs1_pi_pin: spi0-cs1-pi-pin {
+				pins = "PI14";
+				function = "spi0";
+			};
+
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			spi2_cs0_pc_pin: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			uart3_ph_pins: uart3-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart3";
+			};
+
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			uart4_ph_pins: uart4-ph-pins {
+				pins = "PH4", "PH5";
+				function = "uart4";
+			};
+
+			uart5_pi_pins: uart5-pi-pins {
+				pins = "PI10", "PI11";
+				function = "uart5";
+			};
+
+			uart6_pi_pins: uart6-pi-pins {
+				pins = "PI12", "PI13";
+				function = "uart6";
+			};
+
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun7i-a20-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 4>,
+			       <&dma SUN4I_DMA_NORMAL 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun7i-a20-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		i2s2: i2s@1c24400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c24400 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 6>,
+			       <&dma SUN4I_DMA_NORMAL 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun7i-a20-can",
+				     "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hstimer@1c60000 {
+			compatible = "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a23-a33.dtsi b/roms/u-boot/arch/arm/dts/sun8i-a23-a33.dtsi
new file mode 100644
index 000000000..44f3cad3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a23-a33.dtsi
@@ -0,0 +1,668 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_lcd: framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun8i-a23";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		ext_osc32k: ext_osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc@1c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		nfc: nand@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c20800 0x400>;
+			/* interrupts get set in SoC specific dtsi file */
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins_a: uart1@0 {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2", "PC5",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14", "PC15";
+				function = "nand0";
+			};
+
+			nand_pins_cs0: nand-pins-cs0 {
+				pins = "PC4";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_pins_cs1: nand-pins-cs1 {
+				pins = "PC3";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_pins_rb0: nand-pins-rb0 {
+				pins = "PC6";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_pins_rb1: nand-pins-rb1 {
+				pins = "PC7";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			pwm0_pins: pwm0 {
+				pins = "PH0";
+				function = "pwm0";
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				pins = "PH2", "PH3";
+				function = "i2c0";
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				pins = "PH4", "PH5";
+				function = "i2c1";
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			lcd_rgb666_pins: lcd-rgb666@0 {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-a23-mali",
+				     "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k";
+			clocks = <&ext_osc32k>;
+			#clock-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+
+			codec_analog: codec-analog {
+				compatible = "allwinner,sun8i-a23-codec-analog";
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a23-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a23-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			r_rsb_pins: r_rsb {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+
+			r_uart_pins_a: r_uart@0 {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a23-evb.dts b/roms/u-boot/arch/arm/dts/sun8i-a23-evb.dts
new file mode 100644
index 000000000..8a93697df
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a23-evb.dts
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner A23 Evaluation Board";
+	compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button@600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_evb: mmc0_cd_pin@0 {
+		pins = "PB4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+/*
+ * The RX line has a non-populated resistance. In order to use it, you
+ * need to solder R207 on the back of the board in order to close the
+ * line and get a working UART.
+ */
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a23-gt90h-v4.dts b/roms/u-boot/arch/arm/dts/sun8i-a23-gt90h-v4.dts
new file mode 100644
index 000000000..e3c7a25ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a23-gt90h-v4.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Allwinner GT90H Dual Core Tablet (v4)";
+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-gt90h.fw";
+	touchscreen-size-x = <1792>;
+	touchscreen-size-y = <1024>;
+	status = "okay";
+};
+
+&lradc {
+	button@600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a23-inet86dz.dts b/roms/u-boot/arch/arm/dts/sun8i-a23-inet86dz.dts
new file mode 100644
index 000000000..d4405752a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a23-inet86dz.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-86DZ Rev 01";
+	compatible = "primux,inet86dz", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-inet86dz.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/roms/u-boot/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
new file mode 100644
index 000000000..649e31339
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2407PXE03 tablet";
+	compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&i2c1 {
+	mma7660: accelerometer@4c {
+		reg = <0x4c>;
+		compatible = "fsl,mma7660";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&mmc1_pins_a {
+	bias-pull-up;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
+		pins = "PL6";
+		function = "gpio_out";
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	vddio-supply = <&reg_ldo_io1>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/roms/u-boot/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
new file mode 100644
index 000000000..6b3bcae08
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2809PXE04 tablet";
+	compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&mmc1_pins_a {
+	bias-pull-up;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
+		pins = "PL6";
+		function = "gpio_out";
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3670";
+	firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
+	touchscreen-size-x = <1660>;
+	touchscreen-size-y = <890>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a23-q8-tablet.dts b/roms/u-boot/arch/arm/dts/sun8i-a23-q8-tablet.dts
new file mode 100644
index 000000000..b6958e8f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a23-q8-tablet.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A23 Tablet";
+	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"Speaker", "HP",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",  "MBIAS",
+		"Headset Mic", "HBIAS";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a23.dtsi b/roms/u-boot/arch/arm/dts/sun8i-a23.dtsi
new file mode 100644
index 000000000..58e6585b5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a23.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+
+/ {
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	soc@1c00000 {
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a23-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a23-ccu";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a23-pinctrl";
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb_otg {
+	compatible = "allwinner,sun6i-a31-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a23-usb-phy";
+	reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/roms/u-boot/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
new file mode 100644
index 000000000..f71159987
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
+	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
+
+	aliases {
+		/* Make u-boot set mac-address for rtl8703as (no eeprom) */
+		ethernet0 = &rtl8703as;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-ga10h.fw";
+	touchscreen-size-x = <1630>;
+	touchscreen-size-y = <990>;
+	touchscreen-inverted-y;
+	status = "okay";
+};
+
+&lradc {
+	button@600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8703as: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts b/roms/u-boot/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
new file mode 100644
index 000000000..3e0595910
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-D978 Rev 02";
+	compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		/* Delete debug UART as serial0 is the UART for bluetooth */
+		/delete-property/stdout-path;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_d978>;
+
+		home {
+			label = "d978:blue:home";
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		};
+	};
+};
+
+&mmc1_pins_a {
+	bias-pull-up;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	led_pin_d978: led_pin_d978@0 {
+		pins = "PL5";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&r_uart {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>,
+		    <&uart1_pins_cts_rts_a>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a33-olinuxino.dts b/roms/u-boot/arch/arm/dts/sun8i-a33-olinuxino.dts
new file mode 100644
index 000000000..a1a1eb64c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a33-olinuxino.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
+ *                  Olimex LTD. <support@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A33-OLinuXino";
+	compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "a33-olinuxino:green:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&sound {
+	/* Board level jack widgets */
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	/* Board level routing. First 2 routes copied from SoC level */
+	simple-audio-card,routing =
+		"Left DAC", "AIF1 Slot 0 Left",
+		"Right DAC", "AIF1 Slot 0 Right",
+		"HP", "HPCOM",
+		"Headphone Jack", "HP",
+		"MIC1", "Microphone Jack",
+		"Microphone Jack", "MBIAS";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a33-q8-tablet.dts b/roms/u-boot/arch/arm/dts/sun8i-a33-q8-tablet.dts
new file mode 100644
index 000000000..b0bc2360f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a33-q8-tablet.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A33 Tablet";
+	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts b/roms/u-boot/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
new file mode 100644
index 000000000..541acb4d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
@@ -0,0 +1,293 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA33";
+	compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "netron-dy,e231732";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp-1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp-1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_dcdc1>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button@600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
+		pins = "PB4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a33.dtsi b/roms/u-boot/arch/arm/dts/sun8i-a33.dtsi
new file mode 100644
index 000000000..8d278ee00
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a33.dtsi
@@ -0,0 +1,533 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-a33-display-engine";
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&ths>;
+	};
+
+	mali_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-144000000 {
+			opp-hz = /bits/ 64 <144000000>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun8i-a33-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&link_codec>;
+		simple-audio-card,bitclock-master = <&link_codec>;
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	soc@1c00000 {
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-a33-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_LCD>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SS>;
+			reset-names = "ahb";
+		};
+
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
+		ths: ths@1c25000 {
+			compatible = "allwinner,sun8i-a33-ths";
+			reg = <0x01c25000 0x100>;
+			#thermal-sensor-cells = <0>;
+			#io-channel-cells = <0>;
+		};
+
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun6i-a31-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_SCLK>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					dsi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_dsi>;
+					};
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun8i-a33-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun8i-a33-display-backend";
+			reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+			reg-names = "be", "sat";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+			clock-names = "ahb", "mod",
+				      "ram", "sat";
+			resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+			reset-names = "be", "sat";
+			assigned-clocks = <&ccu CLK_DE_BE>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			compatible = "allwinner,sun8i-a33-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			assigned-clocks = <&ccu CLK_DRC>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
+				};
+
+				map3 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert0: gpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_alert1: gpu_alert1 {
+					/* milliCelsius */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
+&mali {
+	operating-points-v2 = <&mali_opp_table>;
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a33-pinctrl";
+	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+	uart0_pins_b: uart0@1 {
+		pins = "PB0", "PB1";
+		function = "uart0";
+	};
+
+};
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/roms/u-boot/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 000000000..36ecebaff
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,269 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb0_vbus: reg-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ephy";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/roms/u-boot/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
new file mode 100644
index 000000000..eaff6fa40
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
@@ -0,0 +1,360 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M3";
+	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bananapi-m3:blue:usr";
+			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "bananapi-m3:green:usr";
+			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+
+	/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_sw>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	allwinner,rx-delay-ps = <700>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		fldoin-supply = <&reg_dcdc5>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/* schematics says 3.1V but FEX file says 3.3V */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	/*
+	 * This powers both the WiFi/BT module's main power, I/O supply,
+	 * and external pull-ups on all the data lines. It should be set
+	 * to the same voltage as the I/O supply (DCDC1 in this case) to
+	 * avoid any leakage or mismatch.
+	 */
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pd";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	/*
+	 * The PHY requires 20ms after all voltages
+	 * are applied until core logic is ready and
+	 * 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC
+	 * ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-name = "vcc-ephy";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/roms/u-boot/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
new file mode 100644
index 000000000..5dba4fc31
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
@@ -0,0 +1,397 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubietruck Plus";
+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "cubietruck-plus:blue:usr";
+			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+		};
+
+		orange {
+			label = "cubietruck-plus:orange:usr";
+			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
+		};
+
+		white {
+			label = "cubietruck-plus:white:usr";
+			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
+		};
+
+		green {
+			label = "cubietruck-plus:green:usr";
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+		};
+	};
+
+	usb-hub {
+		/* I2C is not connected */
+		compatible = "smsc,usb3503";
+		initial-mode = <1>; /* initialize in HUB mode */
+		disabled-ports = <1>;
+		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		refclk-frequency = <19200000>;
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+	};
+
+	reg_usb2_vbus: reg-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&ehci0 {
+	/* GL830 USB-to-SATA bridge here */
+	status = "okay";
+};
+
+&ehci1 {
+	/* USB3503 HSIC USB 2.0 hub here */
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_dldo4>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_sw>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/*
+	 * The schematics say this should be 3.3V, but the FEX file says
+	 * it should be 3V. The latter makes sense, as the WiFi module's
+	 * I/O is indirectly powered from DCDC1, through SW. It is rated
+	 * at 2.98V maximum.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "dp-pwr";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "ephy-io";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "ephy";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-1";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-2";
+};
+
+&reg_fldo1 {
+	/* TODO should be handled by USB PHY */
+	regulator-always-on;
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi-io";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a83t-tbs-a711.dts b/roms/u-boot/arch/arm/dts/sun8i-a83t-tbs-a711.dts
new file mode 100644
index 000000000..1537ce148
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a83t-tbs-a711.dts
@@ -0,0 +1,423 @@
+/*
+ * Copyright (C) 2017 Touchless Biometric Systems AG
+ * Tomas Novotny <tomas@novotny.cz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "TBS A711 Tablet";
+	compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+	};
+
+	panel {
+		compatible = "tbs,a711-panel", "panel-lvds";
+		backlight = <&backlight>;
+		power-supply = <&reg_sw>;
+
+		width-mm = <153>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <52000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <20>;
+			hfront-porch = <180>;
+			hback-porch = <160>;
+			vfront-porch = <12>;
+			vback-porch = <23>;
+			vsync-len = <5>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	reg_vmain: reg-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vbat>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+
+		/*
+		 * This is actually Bluetooth's clock, but we have to
+		 * hook it up somewheere
+		 */
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+/*
+ * An USB-2 hub is connected here, which also means we don't need to
+ * enable the OHCI controller.
+ */
+&ehci0 {
+	status = "okay";
+};
+
+/*
+ * There's a modem connected here that needs to be initialised before
+ * being able to be enumerated.
+ */
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pin>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+
+};
+
+#include "axp81x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1.8";
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-name = "vdd-drampll";
+};
+
+&reg_aldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-always-on;
+	regulator-name = "vcc-io";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-A";
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-B";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-always-on;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-always-on;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <4200000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-r";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dsi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-f";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-hsic";
+};
+
+&reg_fldo2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-vb";
+	status = "okay";
+};
+
+&reg_sw {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-lcd";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_lvds_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* There's the BT part of the AP6210 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus_supply = <&reg_vmain>;
+	usb2_vbus_supply = <&reg_vmain>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-a83t.dtsi b/roms/u-boot/arch/arm/dts/sun8i-a83t.dtsi
new file mode 100644
index 000000000..2be23d600
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-a83t.dtsi
@@ -0,0 +1,1030 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			clocks = <&ccu CLK_C0CPUX>;
+			clock-names = "cpu";
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <3>;
+		};
+
+		cpu100: cpu@100 {
+			clocks = <&ccu CLK_C1CPUX>;
+			clock-names = "cpu";
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x100>;
+		};
+
+		cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x101>;
+		};
+
+		cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x102>;
+		};
+
+		cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* TODO: PRCM block has a mux for this. */
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * This is called "internal OSC" in some places.
+		 * It is an internal RC-based oscillator.
+		 * TODO: Its controls are in the PRCM block.
+		 */
+		osc16M: osc16M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <16000000>;
+			clock-output-names = "osc16M";
+		};
+
+		osc16Md512: osc16Md512_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <512>;
+			clock-mult = <1>;
+			clocks = <&osc16M>;
+			clock-output-names = "osc16M-d512";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-a83t-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpu1_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-a83t-de2-clk";
+			reg = <0x01000000 0x100000>;
+			clocks = <&ccu CLK_PLL_DE>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+
+					mixer1_out_tcon1: endpoint {
+						remote-endpoint = <&tcon1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun8i-a83t-cpucfg";
+			reg = <0x01700000 0x400>;
+		};
+
+		cci@1790000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01790000 0x10000>;
+			ranges = <0x0 0x01790000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun8i-a83t-system-controller",
+				"syscon";
+			reg = <0x01c00000 0x1000>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a83t-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-a83t-tcon-lcd";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON1>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					reg = <0>;
+
+					tcon1_in_mixer1: endpoint {
+						remote-endpoint = <&mixer1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-a83t-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun8i-a83t-sid";
+			reg = <0x1c14000 0x400>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-a83t-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-a83t-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x14>,
+			      <0x01c1b800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_HSIC>,
+				 <&ccu CLK_USB_HSIC_12M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb2_hsic_12M";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_HSIC>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a83t-ohci",
+				     "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-a83t-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD11", "PD12", "PD13", "PD14", "PD18",
+				       "PD19", "PD21", "PD22", "PD23";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			hdmi_pins: hdmi-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "hdmi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH0", "PH1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			i2c2_ph_pins: i2c2-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c2";
+			};
+
+			i2s1_pins: i2s1-pins {
+				/* I2S1 does not have external MCLK pin */
+				pins = "PG10", "PG11", "PG12", "PG13";
+				function = "i2s1";
+			};
+
+			lcd_lvds_pins: lcd-lvds-pins {
+				pins = "PD18", "PD19", "PD20", "PD21", "PD22",
+				       "PD23", "PD24", "PD25", "PD26", "PD27";
+				function = "lvds0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+				pins = "PC5", "PC6", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			pwm_pin: pwm-pin {
+				pins = "PD28";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PE18";
+				function = "spdif";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-spdif",
+				     "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_pins>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-a83t-pwm",
+				     "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-a83t-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x104>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu 13>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu 27>;
+			clock-names = "stmmaceth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pins>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon1: endpoint {
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-a83t-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-a83t-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-a83t-r-ccu";
+			reg = <0x01f01400 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
+				 <&ccu 6>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a83t-r-cpucfg";
+			reg = <0x1f01c00 0x400>;
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a83t-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a83t-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_APB0_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/roms/u-boot/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
new file mode 100644
index 000000000..d277d0430
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
+ *   Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Zero";
+	compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-zero:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "power";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	/*
+	 * On the production batch of this board the card detect GPIO is
+	 * high active (card inserted), although on the early samples it's
+	 * low active.
+	 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	/*
+	 * There're two micro-USB connectors, one is power-only and another is
+	 * OTG. The Vbus of these two connectors are connected together, so
+	 * the external USB device will be powered just by the power input
+	 * from the power-only USB port.
+	 */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/roms/u-boot/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 000000000..4db0d4bb6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H2+";
+	compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts b/roms/u-boot/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
new file mode 100644
index 000000000..3356f4210
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Orange Pi R1 is based on Orange Pi Zero design */
+#include "sun8i-h2-plus-orangepi-zero.dts"
+
+/ {
+	model = "Xunlong Orange Pi R1";
+	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
+
+	/delete-node/ reg_vcc_wifi;
+
+	/*
+	 * Ths pin of this regulator is the same with the Wi-Fi extra
+	 * regulator on the original Zero. However it's used for USB
+	 * Ethernet rather than the Wi-Fi now.
+	 */
+	reg_vcc_usb_eth: reg-vcc-usb-ethernet {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-usb-ethernet";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	aliases {
+		ethernet1 = &rtl8189etv;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+	};
+};
+
+&ohci1 {
+	/*
+	 * RTL8152B USB-Ethernet adapter is connected to USB1,
+	 * and it's a USB 2.0 device. So the OHCI1 controller
+	 * can be left disabled.
+	 */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+
+	rtl8189etv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usb_eth>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/roms/u-boot/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
new file mode 100644
index 000000000..f19ed981d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-orangepi-one.dts, which is:
+ *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Zero";
+	compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
+		ethernet1 = &xr819;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc_wifi: reg_vcc_wifi {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-wifi";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	xr819: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi0 {
+	/* Disable SPI NOR by default: it optional on Orange Pi Zero boards */
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/*
+	 * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
+	 * power up the board; when it's used as OTG port, this VBUS is
+	 * always off even if the board is powered via GPIO pins.
+	 */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000..fc4a8c3d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H3";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
new file mode 100644
index 000000000..195a75da1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus H3";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-beelink-x2.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-beelink-x2.dts
new file mode 100644
index 000000000..45a24441f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-beelink-x2.dts
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Beelink X2";
+	compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		ethernet1 = &sdiowifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "beelink-x2:blue:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		red {
+			label = "beelink-x2:red:standby";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+
+	sound_spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	sdiowifi: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on except for the OTG port */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 000000000..02fbe00cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+	model = "Emlid Neutis N5H3 Developer board";
+	compatible = "emlid,neutis-n5h3-devboard",
+		     "emlid,neutis-n5h3",
+		     "allwinner,sun8i-h3";
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/roms/u-boot/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 000000000..3f5c63e58
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include <sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
new file mode 100644
index 000000000..a8b2f0f1c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H3";
+	compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts
new file mode 100644
index 000000000..ff0a7a952
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw>
+ * Copyright (C) 2018 Jonathan McDowell <noodles@earth.li>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MapleBoard MP130";
+	compatible = "mapleboard,mp130", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "mp130:orange:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "mp130:orange:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+
+		user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-duo2.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
new file mode 100644
index 000000000..6b149271e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "FriendlyARM NanoPi Duo2";
+	compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:green:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		k1 {
+			label = "k1";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		enable-active-high;
+		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	reg_vdd_sys: vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
new file mode 100644
index 000000000..4ba533b03
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1 Plus";
+	compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart3;
+		ethernet0 = &emac;
+		ethernet1 = &sdio_wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-m1.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-m1.dts
new file mode 100644
index 000000000..69243dcb3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-m1.dts
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1";
+	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
new file mode 100644
index 000000000..07867a0d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Air";
+	compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-neo.dts
new file mode 100644
index 000000000..9f33f6fae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi-neo.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi NEO";
+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi.dtsi b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi.dtsi
new file mode 100644
index 000000000..4df29a653
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-nanopi.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "k1";
+
+		k1 {
+			label = "k1";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-2.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-2.dts
new file mode 100644
index 000000000..597c425d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-2.dts
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi 2";
+	compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		sw2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	allwinner,audio-routing =
+		"Speaker", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-lite.dts
new file mode 100644
index 000000000..6f9c97add
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-lite.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Lite";
+	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+	aliases {
+		/* The H3 emac is not used so the wifi is ethernet0 */
+		ethernet0 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-one.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-one.dts
new file mode 100644
index 000000000..4759ba3f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-one.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi One";
+	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
new file mode 100644
index 000000000..71fb73208
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi PC Plus is an extended version of the regular PC */
+#include "sun8i-h3-orangepi-pc.dts"
+
+/ {
+	model = "Xunlong Orange Pi PC Plus";
+	compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189ftv;
+	};
+};
+
+&emac {
+	/* LEDs changed to active high on the plus */
+	/delete-property/ allwinner,leds-active-low;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-pc.dts
new file mode 100644
index 000000000..5aff8ecc6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-pc.dts
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi PC";
+	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		/*
+		 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+		 * however both the Armbian DVFS table and the official one
+		 * have operating points with voltage under 1.1V, and both
+		 * DVFS table are known to work properly at the lowest
+		 * operating point.
+		 *
+		 * Use 1.0V as the minimum voltage instead.
+		 */
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on USB host ports are always on */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 000000000..97f497854
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi Plus is an extended version of the Orange Pi 2 */
+#include "sun8i-h3-orangepi-2.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus / Plus 2";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&usbphy {
+	usb3_vbus-supply = <&reg_usb3_vbus>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
new file mode 100644
index 000000000..6dbf7b2e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Orange Pi Plus 2E is an extended version of the Orange Pi PC Plus,
+ * with 2G RAM and an external gbit ethernet phy.
+ */
+
+#include "sun8i-h3-orangepi-pc-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus 2E";
+	compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3";
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
new file mode 100644
index 000000000..b8f46e280
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2 H3";
+	compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3-rervision-dvk.dts b/roms/u-boot/arch/arm/dts/sun8i-h3-rervision-dvk.dts
new file mode 100644
index 000000000..4738f3a9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3-rervision-dvk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Bootlin
+ * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "RerVision H3-DVK";
+	compatible = "rervision,h3-dvk", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-h3.dtsi b/roms/u-boot/arch/arm/dts/sun8i-h3.dtsi
new file mode 100644
index 000000000..20217e2ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-h3.dtsi
@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-h3-h5.dtsi"
+
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-h3-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-h3-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-h3-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-h3-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun8i-h3-de2-clk";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>,
+		 <&ccu CLK_MMC0>,
+		 <&ccu CLK_MMC0_OUTPUT>,
+		 <&ccu CLK_MMC0_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>,
+		 <&ccu CLK_MMC1>,
+		 <&ccu CLK_MMC1_OUTPUT>,
+		 <&ccu CLK_MMC1_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC2>,
+		 <&ccu CLK_MMC2>,
+		 <&ccu CLK_MMC2_OUTPUT>,
+		 <&ccu CLK_MMC2_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-h3-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun8i-h3-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun8i-h3-sid";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-q8-common.dtsi b/roms/u-boot/arch/arm/dts/sun8i-q8-common.dtsi
new file mode 100644
index 000000000..c676940a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-q8-common.dtsi
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+		/* Make u-boot set mac-address for wifi without an eeprom */
+		ethernet0 = &sdio_wifi;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/*
+		 * Q8 boards use various PL# pins as wifi-en. On other boards
+		 * these may be connected to a wifi module output pin. To avoid
+		 * short-circuits we configure these as inputs with pull-ups via
+		 * pinctrl, instead of listing them as active-low reset-gpios.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_q8>;
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&ehci0 {
+	status  = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc1_pins_a {
+	bias-pull-up;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
+		pins = "PL6", "PL7", "PL11";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-r16-bananapi-m2m.dts b/roms/u-boot/arch/arm/dts/sun8i-r16-bananapi-m2m.dts
new file mode 100644
index 000000000..0dbdb29a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-r16-bananapi-m2m.dts
@@ -0,0 +1,320 @@
+/*
+ * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi M2 Magic";
+	compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bpi-m2m:blue:usr";
+			gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "bpi-m2m:green:usr";
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			label = "bpi-m2m:red:power";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp@1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp@1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+/* This is the i2c bus exposed on the DSI connector for the touch panel */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "disabled";
+};
+
+/* This is the i2c bus exposed on the GPIO header */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "disabled";
+};
+
+/* This is the i2c bus exposed on the CSI connector to control the sensor */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "disabled";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/roms/u-boot/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
new file mode 100644
index 000000000..e5590208e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+/ {
+	model = "Nintendo NES Classic Edition";
+	compatible = "nintendo,nes-classic-edition", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-r16-parrot.dts b/roms/u-boot/arch/arm/dts/sun8i-r16-parrot.dts
new file mode 100644
index 000000000..472c03b7a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-r16-parrot.dts
@@ -0,0 +1,355 @@
+/*
+ * Copyright 2016 Quentin Schulz
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner R16 EVB (Parrot)";
+	compatible = "allwinner,parrot", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_parrot>;
+
+		led1 {
+			label = "parrot:led1:usr";
+			gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+
+		led2 {
+			label = "parrot:led2:usr";
+			gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/*
+	 * FIXME: An as-yet-unknown accelerometer is connected to this
+	 * i2c bus.
+	 */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@0 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@1 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	drive-strength = <40>;
+	bias-pull-up;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
+		pins = "PD14";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	led_pins_parrot: led_pins@0 {
+		pins = "PE16", "PE17";
+		function = "gpio_out";
+	};
+
+	usb0_id_det: usb0_id_detect_pin@0 {
+		pins = "PD10";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
+		pins = "PD12";
+		function = "gpio_out";
+	};
+};
+
+&r_pio {
+	wifi_reset_pin_parrot: wifi_reset_pin@0 {
+		pins = "PL6";
+		function = "gpio_out";
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-dsp";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "eldo3";
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_parrot>;
+	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_det>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/roms/u-boot/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 000000000..a6a1087a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Ultra";
+	compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led-green {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led-blue {
+			label = "bananapi:blue:user";
+			gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ir0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-r40.dtsi b/roms/u-boot/arch/arm/dts/sun8i-r40.dtsi
new file mode 100644
index 000000000..d5ad3b9ef
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-r40.dtsi
@@ -0,0 +1,1174 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <20000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-r40-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu_thermal: gpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-r40-de2-clk",
+				     "allwinner,sun8i-h3-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+					mixer0_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+					mixer1_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-r40-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 /*
+				  * NOTE: Contrary to what datasheet claims,
+				  * DRAM deinterlace gate doesn't exist and
+				  * it's shared with CSI1.
+				  */
+				 <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-r40-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-r40-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-r40-dma",
+				     "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <16>;
+			dma-requests = <31>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun8i-r40-csi0",
+				     "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_BUS_CSI0>;
+			interconnects = <&mbus 5>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-r40-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+			<&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc0_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-r40-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc2_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,sun8i-r40-usb-phy";
+			reg = <0x01c13400 0x14>,
+			      <0x01c14800 0x4>,
+			      <0x01c19800 0x4>,
+			      <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-r40-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			reset-names = "ahci";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c19000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c19000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c19400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c19400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-r40-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			compatible = "allwinner,sun8i-r40-rtc";
+			reg = <0x01c20400 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-r40-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi0-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+				       "PA4", "PA5", "PA6", "PA7",
+				       "PA8", "PA10", "PA11", "PA12",
+				       "PA13", "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
+			ir0_pins: ir0-pins {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir1_pins: ir1-pins {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13", "PC14",
+				       "PC15", "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+				pins = "PC23";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+				pins = "PI15";
+				function = "spi1";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21800 0x400>;
+			pinctrl-0 = <&ir0_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR0>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21c00 0x400>;
+			pinctrl-0 = <&ir1_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR1>;
+			status = "disabled";
+		};
+
+		ths: thermal-sensor@1c24c00 {
+			compatible = "allwinner,sun8i-r40-ths";
+			reg = <0x01c24c00 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			/* TODO: add nvmem-cells for calibration */
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun8i-r40-gmac";
+			syscon = <&ccu>;
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_GMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-r40-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 155>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
+		tcon_top: tcon-top@1c70000 {
+			compatible = "allwinner,sun8i-r40-tcon-top";
+			reg = <0x01c70000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>,
+				 <&ccu CLK_TVE0>,
+				 <&ccu CLK_TCON_TV1>,
+				 <&ccu CLK_TVE1>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus",
+				      "tcon-tv0",
+				      "tve0",
+				      "tcon-tv1",
+				      "tve1",
+				      "dsi";
+			clock-output-names = "tcon-top-tv0",
+					     "tcon-top-tv1",
+					     "tcon-top-dsi";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer1_in: port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					tcon_top_mixer1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer1_out: port@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv0_out_tcon_top>;
+					};
+
+					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_tv1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv0: lcd-controller@1c73000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c73000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+					};
+
+					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+					};
+				};
+
+				tcon_tv0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv0_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+					};
+				};
+			};
+		};
+
+		tcon_tv1: lcd-controller@1c74000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c74000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV1>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
+					};
+
+					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
+					};
+				};
+
+				tcon_tv1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv1_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
+					};
+				};
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-r40-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-r40-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
+			clock-names = "bus", "mod", "pll-0", "pll-1";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-reference-design-tablet.dtsi b/roms/u-boot/arch/arm/dts/sun8i-reference-design-tablet.dtsi
new file mode 100644
index 000000000..880096c7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-reference-design-tablet.dtsi
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * The gsl1680 is the only device on this bus.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@0 {
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_power_pin>;
+		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin: mmc0_cd_pin@0 {
+		pins = "PB4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	ts_power_pin: ts_power_pin@0 {
+		pins = "PH1";
+		function = "gpio_out";
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		pins = "PH8";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-s3-lichee-zero-plus.dts b/roms/u-boot/arch/arm/dts/sun8i-s3-lichee-zero-plus.dts
new file mode 100644
index 000000000..d18192d51
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-s3-lichee-zero-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sipeed Lichee Zero Plus";
+	compatible = "sipeed,lichee-zero-plus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-s3-pinecube.dts b/roms/u-boot/arch/arm/dts/sun8i-s3-pinecube.dts
new file mode 100644
index 000000000..9bab6b7f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-s3-pinecube.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "PineCube IP Camera";
+	compatible = "pine64,pinecube", "allwinner,sun8i-s3";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "pine64:ir:led1";
+			gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+		};
+
+		led2 {
+			label = "pine64:ir:led2";
+			gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_wifi: vcc-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
+		vin-supply = <&reg_dcdc3>;
+		startup-delay-us = <200000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi1_8bit_pins>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi1_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp203",
+			     "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pe_pins>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&csi1_mclk_pin>;
+		clocks = <&ccu CLK_CSI1_MCLK>;
+		clock-names = "xclk";
+
+		AVDD-supply = <&reg_ldo3>;
+		DOVDD-supply = <&reg_ldo3>;
+		DVDD-supply = <&reg_ldo4>;
+		reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */
+		powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */
+
+		port {
+			ov5640_ep: endpoint {
+				remote-endpoint = <&csi1_ep>;
+				bus-width = <8>;
+				hsync-active = <1>; /* Active high */
+				vsync-active = <0>; /* Active low */
+				data-active = <1>;  /* Active high */
+				pclk-sample = <1>;  /* Rising */
+			};
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Setup";
+		linux,code = <KEY_SETUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	vqmmc-supply = <&reg_dcdc3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_ldo3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu-ephy";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-dovdd-2v8-csi";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-v3.dtsi b/roms/u-boot/arch/arm/dts/sun8i-v3.dtsi
new file mode 100644
index 000000000..ca4672ed2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-v3.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include "sun8i-v3s.dtsi"
+
+&ccu {
+	compatible = "allwinner,sun8i-v3-ccu";
+};
+
+&emac {
+	/delete-property/ phy-handle;
+	/delete-property/ phy-mode;
+};
+
+&mdio_mux {
+	external_mdio: mdio@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pio {
+	compatible = "allwinner,sun8i-v3-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts b/roms/u-boot/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
new file mode 100644
index 000000000..db5cd0b85
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-v3s-licheepi-zero.dts"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lichee Pi Zero with Dock";
+	compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
+		     "allwinner,sun8i-v3s";
+
+	leds {
+		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
+		status = "disabled";
+	};
+};
+
+&mmc1 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-600 {
+		label = "Select";
+		linux,code = <KEY_SELECT>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Start";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-v3s-licheepi-zero.dts b/roms/u-boot/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
new file mode 100644
index 000000000..2e4587d26
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Lichee Pi Zero";
+	compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue_led {
+			label = "licheepi:blue:usr";
+			gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+		};
+
+		green_led {
+			label = "licheepi:green:usr";
+			gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+			default-state = "on";
+		};
+
+		red_led {
+			label = "licheepi:red:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
+		};
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-v3s.dtsi b/roms/u-boot/arch/arm/dts/sun8i-v3s.dtsi
new file mode 100644
index 000000000..0c7341676
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-v3s.dtsi
@@ -0,0 +1,550 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-v3s-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks 0>,
+				 <&display_clocks 6>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-v3s-system-control",
+				     "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		crypto@1c15000 {
+			compatible = "allwinner,sun8i-v3s-crypto",
+				     "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_CE>;
+			reset-names = "ahb";
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-v3s-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-v3s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-v3-rtc";
+			reg = <0x01c20400 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k", "osc32k-out";
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-v3s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			csi1_8bit_pins: csi1-8bit-pins {
+				pins = "PE0", "PE2", "PE3", "PE8", "PE9",
+				       "PE10", "PE11", "PE12", "PE13", "PE14",
+				       "PE15";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi1_mclk_pin: csi1-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB6", "PB7";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pe_pins: i2c1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "i2c1";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-v3s-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-v3s-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			phy-handle = <&int_mii_phy>;
+			phy-mode = "mii";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio_mux: mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+			};
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI1_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/roms/u-boot/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
new file mode 100644
index 000000000..47954551f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -0,0 +1,305 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi M2 Berry";
+	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun9i-a80-cubieboard4.dts b/roms/u-boot/arch/arm/dts/sun9i-a80-cubieboard4.dts
new file mode 100644
index 000000000..85da85faf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun9i-a80-cubieboard4.dts
@@ -0,0 +1,477 @@
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubieboard4";
+	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "cubieboard4:green:usr";
+			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
+		};
+
+		red {
+			label = "cubieboard4:red:usr";
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+		label = "vga";
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
+		vdd-supply = <&reg_dcdc1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_dac_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_dac_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp809.dtsi"
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun9i-a80-cx-a99.dts b/roms/u-boot/arch/arm/dts/sun9i-a80-cx-a99.dts
new file mode 100644
index 000000000..cf126bbd2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun9i-a80-cx-a99.dts
@@ -0,0 +1,380 @@
+/*
+ * sun9i-a80-cx-a99.dts - Device Tree file for the Sunchip CX-A99 board.
+ *
+ * Copyright (C) 2017 Rask Ingemann Lambertsen <rask@formelder.dk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Sunchip CX-A99 board is found in several similar Android media
+ * players, such as:
+ *
+ * Instabox Fantasy A8 (no external antenna)
+ * Jesurun CS-Q8 (ships with larger remote control)
+ * Jesurun Maxone
+ * Rikomagic (RKM) MK80/MK80LE
+ * Tronsmart Draco AW80 Meta/Telos
+ *
+ * See the Sunchip CX-A99 page on the Linux-sunxi wiki for more information.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sunchip CX-A99";
+	compatible = "sunchip,cx-a99", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>;	/* PG10 */
+			label = "cx-a99:blue:status";
+		};
+
+		red {
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;	/* PG11 */
+			label = "cx-a99:red:status";
+		};
+	};
+
+	powerseq_wifi: powerseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 0 GPIO_ACTIVE_LOW>;	/* PM0 */
+		post-power-on-delay-ms = <1>;	/* Minimum 2 cycles. */
+	};
+
+	/* USB 2.0 connector closest to the 12 V power connector. */
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 7 /* no flag support */ 0>;	/* PL7 */
+		enable-active-high;
+	};
+
+	/* USB 2.0 connector next to the SD card slot. */
+	reg_usb3_vbus: regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 8 /* no flag support */ 0>;	/* PL8 */
+		enable-active-high;
+	};
+
+	/*
+	 * OZ80120 voltage regulator for the four Cortex-A15 CPU cores.
+	 * Although the regulator can output 750 - 1200 mV, the permissible
+	 * range for the CPU cores is only 800 - 1100 mV.
+	 */
+	reg_vdd_cpub: regulator-vdd-cpub {
+		compatible = "regulator-gpio";
+
+		regulator-always-on;
+		regulator-min-microvolt = < 800000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vdd-cpub";
+
+		/* Note: GPIO flags are not supported here . */
+		enable-gpio = <&r_pio 0 2 /* flags n/a */ 0>;	/* PL2 */
+		enable-active-high;
+		gpios = <&r_pio 0 3 /* no flag support */ 0>,	/* PL3 */
+			<&r_pio 0 4 /* no flag support */ 0>,	/* PL4 */
+			<&r_pio 0 5 /* no flag support */ 0>;	/* PL5 */
+
+		gpios-states = <1 0 0>;
+		states = <	 750000 0x7
+				 800000 0x3
+				 850000 0x5
+				 900000 0x1
+				 950000 0x6
+				1000000 0x2
+				1100000 0x4
+				1200000 0x0>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+/*
+ * SD card slot. Although the GPIO pin for card detection is listed as capable
+ * of generating interrupts in the "A80 User Manual", this doesn't work for
+ * some unknown reason, so poll the GPIO for card detection. This is also what
+ * the vendor sys_config.fex file specifies.
+ */
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;	/* PH17 */
+	broken-cd;				/* Poll. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdce>;
+	status = "okay";
+};
+
+/* Ampak AP6335 IEEE 802.11 a/b/g/n/ac Wifi. */
+&mmc1 {
+	bus-width = <4>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_cldo3>;	/* See cldo2,cldo3 note. */
+	vqmmc-supply = <&reg_aldo2>;
+	mmc-pwrseq = <&powerseq_wifi>;
+	status = "okay";
+};
+
+/* On-board eMMC card. */
+&mmc2 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdce>;
+	status = "okay";
+};
+
+&osc32k {
+	clocks = <&ac100_rtc 0>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>;	/* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+
+	pmic@745 {
+		compatible = "x-powers,axp808", "x-powers,axp806";
+		x-powers,master-mode;
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		swin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v0";
+			};
+
+			/* Supplies pin groups G and M. */
+			reg_aldo2: aldo2 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-name = "vddio-wifi-codec";
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-boot-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vddio-gmac";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;	/* Hang if disabled */
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vdd18-dll-vcc18-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;	/* Hang if disabled */
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-boot-on;
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd09-hdmi";
+			};
+
+			/* Supplies PLx pins which control some regulators. */
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led";
+			};
+
+			/*
+			 * cldo2 and cldo3 are connected in parallel.
+			 * There is currently no way to express that.
+			 * For now, use regulator-always-on on cldo2 and lock
+			 * the voltage on both to 3.3 V.
+			 */
+			reg_cldo2: cldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vbat2-wifi+bt";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vbat1-wifi+bt";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdcb: dcdcb {
+				regulator-always-on;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;	/* Hang if disabled. */
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys";
+			};
+
+			/* Supplies pin groups B-F and H. */
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spdif";
+			};
+
+			reg_sw: sw {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-codec";
+			};
+		};
+	};
+};
+
+/*
+ * 5-pin connector opposite of the SD card slot:
+ * 1 = GND (pointed to by small triangle), 2 = GND, 3 = 3.3 V, 4 = RX, 5 = TX.
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun9i-a80-optimus.dts b/roms/u-boot/arch/arm/dts/sun9i-a80-optimus.dts
new file mode 100644
index 000000000..58a199b0e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun9i-a80-optimus.dts
@@ -0,0 +1,470 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Merrii A80 Optimus Board";
+	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* The LED names match those found on the board */
+		led2 {
+			label = "optimus:led2:usr";
+			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			label = "optimus:led3:usr";
+			gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
+		};
+
+		led4 {
+			label = "optimus:led4:usr";
+			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp809.dtsi"
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	phy-supply = <&reg_bldo4>;
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sun9i-a80.dtsi b/roms/u-boot/arch/arm/dts/sun9i-a80.dtsi
new file mode 100644
index 000000000..25591d688
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sun9i-a80.dtsi
@@ -0,0 +1,1213 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x3>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		/*
+		 * This clock is actually configurable from the PRCM address
+		 * space. The external 24M oscillator can be turned off, and
+		 * the clock switched to an internal 16M RC oscillator. Under
+		 * normal operation there's no reason to do this, and the
+		 * default is to use the external good one, so just model this
+		 * as a fixed clock. Also it is not entirely clear if the
+		 * osc24M mux in the PRCM affects the entire clock tree, which
+		 * would also throw all the PLL clock rates off, or just the
+		 * downstream clocks in the PRCM.
+		 */
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * The 32k clock is from an external source, normally the
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
+		 */
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clock-output-names = "osc32k";
+		};
+
+		cpus_clk: clk@8001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>,
+				 <&ccu CLK_PLL_PERIPH0>,
+				 <&ccu CLK_PLL_AUDIO>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: clk-ahbs {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@8001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@8001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@8001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun9i-a80-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		sram_b: sram@20000 {
+			/* 256 KiB secure SRAM at 0x20000 */
+			compatible = "mmio-sram";
+			reg = <0x00020000 0x40000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00020000 0x40000>;
+
+			smp-sram@1000 {
+				/*
+				 * This is checked by BROM to determine if
+				 * cpu0 should jump to SMP entry vector
+				 */
+				compatible = "allwinner,sun9i-a80-smp-sram";
+				reg = <0x1000 0x8>;
+			};
+		};
+
+		ehci0: usb@a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>,
+				 <&usb_clocks CLK_USB_OHCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_clocks CLK_USB0_PHY>;
+			clock-names = "phy";
+			resets = <&usb_clocks RST_USB0_PHY>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI1>;
+			resets = <&usb_clocks RST_USB1_HCI>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_clocks CLK_USB1_HSIC>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB1_PHY>;
+			clock-names = "hsic_480M",
+				      "hsic_12M",
+				      "phy";
+			resets = <&usb_clocks RST_USB1_HSIC>,
+				 <&usb_clocks RST_USB1_PHY>;
+			reset-names = "hsic",
+				      "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>,
+				 <&usb_clocks CLK_USB_OHCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_clocks CLK_USB2_HSIC>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB2_PHY>;
+			clock-names = "hsic_480M",
+				      "hsic_12M",
+				      "phy";
+			resets = <&usb_clocks RST_USB2_HSIC>,
+				 <&usb_clocks RST_USB2_PHY>;
+			reset-names = "hsic",
+				      "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usb_clocks: clock@a08000 {
+			compatible = "allwinner,sun9i-a80-usb-clks";
+			reg = <0x00a08000 0x8>;
+			clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+			clock-names = "bus", "hosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun9i-a80-cpucfg";
+			reg = <0x01700000 0x100>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc_config_clk: clk@1c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ccu CLK_BUS_MMC>;
+			clock-names = "ahb";
+			resets = <&ccu RST_BUS_MMC>;
+			reset-names = "ahb";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
+		gic: interrupt-controller@1c41000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c41000 0x1000>,
+			      <0x01c42000 0x2000>,
+			      <0x01c44000 0x2000>,
+			      <0x01c46000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cci: cci@1c90000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01c90000 0x1000>;
+			ranges = <0x0 0x01c90000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				 compatible = "arm,cci-400-pmu,r1";
+				 reg = <0x9000 0x5000>;
+				 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		de_clocks: clock@3000000 {
+			compatible = "allwinner,sun9i-a80-de-clks";
+			reg = <0x03000000 0x30>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_SDRAM>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "dram",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		fe0: display-frontend@3100000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03100000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>,
+				 <&de_clocks CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@3140000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03140000 0x40000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>,
+				 <&de_clocks CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_deu1: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@3200000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03200000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>,
+				 <&de_clocks CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be0>;
+					};
+
+					be0_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@3240000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03240000 0x40000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>,
+				 <&de_clocks CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be1>;
+					};
+
+					be1_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_drc1: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		deu0: deu@3300000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03300000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU0>,
+				 <&de_clocks CLK_IEP_DEU0>,
+				 <&de_clocks CLK_DRAM_DEU0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					deu0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_deu0>;
+					};
+				};
+
+				deu0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu0>;
+					};
+
+					deu0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu0>;
+					};
+				};
+			};
+		};
+
+		deu1: deu@3340000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03340000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU1>,
+				 <&de_clocks CLK_IEP_DEU1>,
+				 <&de_clocks CLK_DRAM_DEU1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					deu1_in_fe1: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe1_out_deu1>;
+					};
+				};
+
+				deu1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu1>;
+					};
+
+					deu1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu1>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@3400000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03400000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC0>,
+				 <&de_clocks CLK_IEP_DRC0>,
+				 <&de_clocks CLK_DRAM_DRC0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@3440000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03440000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC1>,
+				 <&de_clocks CLK_IEP_DRC1>,
+				 <&de_clocks CLK_DRAM_DRC1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc1_in_be1: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc1_out_tcon1: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@3c00000 {
+			compatible = "allwinner,sun9i-a80-tcon-lcd";
+			reg = <0x03c00000 0x10000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
+			reset-names = "lcd", "edp";
+			clock-output-names = "tcon0-pixel-clock";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@3c10000 {
+			compatible = "allwinner,sun9i-a80-tcon-tv";
+			reg = <0x03c10000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>;
+			reset-names = "lcd", "edp";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_drc1: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+		ccu: clock@6000000 {
+			compatible = "allwinner,sun9i-a80-ccu";
+			reg = <0x06000000 0x800>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		timer@6000c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x06000c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@6000ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x06000ca0 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pio: pinctrl@6000800 {
+			compatible = "allwinner,sun9i-a80-pinctrl";
+			reg = <0x06000800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			i2c3_pins: i2c3-pins {
+				pins = "PG10", "PG11";
+				function = "i2c3";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+				       "PD4", "PD5", "PD6", "PD7",
+				       "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15",
+				       "PD16", "PD17", "PD18", "PD19",
+				       "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1" ,"PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12",
+				       "PC13", "PC14", "PC15",
+				       "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH12", "PH13";
+				function = "uart0";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PG12", "PG13", "PG14", "PG15";
+				function = "uart4";
+			};
+		};
+
+		uart0: serial@7000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@7000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@7000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@7000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@7001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@7001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@7002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002c00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@7003000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@7003400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@7003800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003800 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_wdt: watchdog@8001000 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x08001000 0x20>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@8001400 {
+			compatible = "allwinner,sun9i-a80-prcm";
+			reg = <0x08001400 0x200>;
+		};
+
+		apbs_rst: reset@80014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@80015a0 {
+			compatible = "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x080015a0 0xc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ir: ir@8002000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_pins>;
+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apbs_rst 1>;
+			reg = <0x08002000 0x40>;
+			status = "disabled";
+		};
+
+		r_uart: serial@8002800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x08002800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@8002c00 {
+			compatible = "allwinner,sun9i-a80-r-pinctrl";
+			reg = <0x08002c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			resets = <&apbs_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_ir_pins: r-ir-pins {
+				pins = "PL6";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PN0", "PN1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: i2c@8003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/roms/u-boot/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
new file mode 100644
index 000000000..22466afd3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	/*
+	 * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+	 * resistance on the CPU regulator's feedback pin.
+	 */
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/roms/u-boot/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
new file mode 100644
index 000000000..39263e74f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
@@ -0,0 +1,242 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-plus:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "power";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		      compatible = "regulator-fixed";
+		      regulator-name = "gmac-3v3";
+		      regulator-min-microvolt = <3300000>;
+		      regulator-max-microvolt = <3300000>;
+		      startup-delay-us = <100000>;
+		      enable-active-high;
+		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* USB host VBUS is on as long as VCC-IO is on */
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-common-regulators.dtsi b/roms/u-boot/arch/arm/dts/sunxi-common-regulators.dtsi
new file mode 100644
index 000000000..f1953b0c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-common-regulators.dtsi
@@ -0,0 +1,150 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+&pio {
+	ahci_pwr_pin_a: ahci_pwr_pin@0 {
+		allwinner,pins = "PB8";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PB9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_a: usb1_vbus_pin@0 {
+		allwinner,pins = "PH6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb2_vbus_pin_a: usb2_vbus_pin@0 {
+		allwinner,pins = "PH3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+/ {
+	reg_ahci_5v: ahci-5v {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ahci_pwr_pin_a>;
+		regulator-name = "ahci-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_vbus_pin_a>;
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_pin_a>;
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_vcc3v0: vcc3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi b/roms/u-boot/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 000000000..fc67e30fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+		post-power-on-delay-ms = <200>;
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+	status = "okay";
+};
+
+
+&de {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Mic",
+		"Mic",  "MBIAS";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-h3-h5.dtsi b/roms/u-boot/arch/arm/dts/sunxi-h3-h5.dtsi
new file mode 100644
index 000000000..5e9c3060a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-h3-h5.dtsi
@@ -0,0 +1,897 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0-hdmi";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-tve {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-tve";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TVE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01000000 0x100000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-h3-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c0f000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c10000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c11000 0x1000>;
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-h3-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>,
+			      <0x01c1c800 0x4>,
+			      <0x01c1d800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@1c1d000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1d000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@1c1d400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1d400 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD12", "PD13", "PD15", "PD16", "PD17";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PA11", "PA12";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PA18", "PA19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PA17";
+				function = "spdif";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PA15", "PA16", "PA14", "PA13";
+				function = "spi1";
+			};
+
+			uart0_pa_pins: uart0-pa-pins {
+				pins = "PA4", "PA5";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			uart2_rts_cts_pins: uart2-rts-cts-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PA13", "PA14";
+				function = "uart3";
+			};
+
+			uart3_rts_cts_pins: uart3-rts-cts-pins {
+				pins = "PA15", "PA16";
+				function = "uart3";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-h3-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+
+				external_mdio: mdio@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-h3-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu CLK_MBUS>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x8>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-h3-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		rtc: rtc@1f00000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01f00000 0x400>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-h3-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun8i-h3-codec-analog";
+			reg = <0x01f015c0 0x4>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-h3-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-itead-core-common.dtsi b/roms/u-boot/arch/arm/dts/sunxi-itead-core-common.dtsi
new file mode 100644
index 000000000..0d002f83a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-itead-core-common.dtsi
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi b/roms/u-boot/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 000000000..19b3b23cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "librecomputer:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		};
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* VBUS on USB ports are always on */
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	usb3_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi b/roms/u-boot/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 000000000..204fba361
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		/* This is simply a MOSFET switch */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vcc_usbwifi: vcc-usbwifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-usbwifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+		enable-active-high;
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc_io>;
+	vcc-pc-supply = <&reg_vcc_io>;
+	vcc-pd-supply = <&reg_vcc_io>;
+	vcc-pe-supply = <&reg_vcc_io>;
+	vcc-pf-supply = <&reg_vcc_io>;
+	vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usbwifi>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-q8-common.dtsi b/roms/u-boot/arch/arm/dts/sunxi-q8-common.dtsi
new file mode 100644
index 000000000..b8241462f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-q8-common.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-reference-design-tablet.dtsi b/roms/u-boot/arch/arm/dts/sunxi-reference-design-tablet.dtsi
new file mode 100644
index 000000000..b8241462f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-reference-design-tablet.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/sunxi-u-boot.dtsi b/roms/u-boot/arch/arm/dts/sunxi-u-boot.dtsi
new file mode 100644
index 000000000..06da009fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/sunxi-u-boot.dtsi
@@ -0,0 +1,110 @@
+#include <config.h>
+
+#ifdef CONFIG_MACH_SUN50I_H6
+#define BL31_ADDR 0x104000
+#define  SCP_ADDR 0x114000
+#elif defined(CONFIG_MACH_SUN50I_H616)
+#define BL31_ADDR 0x40000000
+#else
+#define BL31_ADDR  0x44000
+#define  SCP_ADDR  0x50000
+#endif
+
+/ {
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc2;
+	};
+
+	binman: binman {
+		multiple-images;
+	};
+};
+
+&binman {
+	u-boot-sunxi-with-spl {
+		filename = "u-boot-sunxi-with-spl.bin";
+		pad-byte = <0xff>;
+
+		blob {
+			filename = "spl/sunxi-spl.bin";
+		};
+
+#ifdef CONFIG_ARM64
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,fdt-list = "of-list";
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					os = "u-boot";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					u-boot-nodtb {
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					os = "arm-trusted-firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <BL31_ADDR>;
+					entry = <BL31_ADDR>;
+
+					atf-bl31 {
+						filename = "bl31.bin";
+						missing-msg = "atf-bl31-sunxi";
+					};
+				};
+
+#ifndef CONFIG_MACH_SUN50I_H616
+				scp {
+					description = "SCP firmware";
+					type = "firmware";
+					arch = "or1k";
+					compression = "none";
+					load = <SCP_ADDR>;
+
+					scp {
+						filename = "scp.bin";
+						missing-msg = "scp-sunxi";
+					};
+				};
+#endif
+
+				@fdt-SEQ {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+				};
+			};
+
+			configurations {
+				default = "@config-DEFAULT-SEQ";
+
+				@config-SEQ {
+					description = "NAME";
+					firmware = "atf";
+#ifdef CONFIG_MACH_SUN50I_H616
+					loadables = "uboot";
+#else
+					loadables = "scp", "uboot";
+#endif
+					fdt = "fdt-SEQ";
+				};
+			};
+		};
+#else
+		u-boot-img {
+			offset = <CONFIG_SPL_PAD_TO>;
+		};
+#endif
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra-u-boot.dtsi b/roms/u-boot/arch/arm/dts/tegra-u-boot.dtsi
new file mode 100644
index 000000000..fe1961991
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra-u-boot.dtsi
@@ -0,0 +1,43 @@
+#include <config.h>
+
+#ifdef CONFIG_SPL_TEXT_BASE
+#define U_BOOT_OFFSET (CONFIG_SYS_TEXT_BASE - CONFIG_SPL_TEXT_BASE)
+#else
+#define U_BOOT_OFFSET 0
+#endif
+
+/ {
+	binman {
+		multiple-images;
+		image1 {
+			filename = "u-boot-tegra.bin";
+			pad-byte = <0xff>;
+			u-boot-spl {
+			};
+			u-boot {
+				offset = <(U_BOOT_OFFSET)>;
+			};
+		};
+
+		/* Same as image1 - some tools still expect the -dtb suffix */
+		image2 {
+			filename = "u-boot-dtb-tegra.bin";
+			pad-byte = <0xff>;
+			u-boot-spl {
+			};
+			u-boot {
+				offset = <(U_BOOT_OFFSET)>;
+			};
+		};
+
+		image3 {
+			filename = "u-boot-nodtb-tegra.bin";
+			pad-byte = <0xff>;
+			u-boot-spl {
+			};
+			u-boot-nodtb {
+				offset = <(U_BOOT_OFFSET)>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra114-dalmore.dts b/roms/u-boot/arch/arm/dts/tegra114-dalmore.dts
new file mode 100644
index 000000000..18bcb75fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra114-dalmore.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA Dalmore";
+	compatible = "nvidia,dalmore", "nvidia,tegra114";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		mmc0 = "/sdhci@78000600";
+		mmc1 = "/sdhci@78000400";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@78000400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	sdhci@78000600 {
+		bus-width = <8>;
+		status = "okay";
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb@7d008000 {
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&uartd {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra114-u-boot.dtsi b/roms/u-boot/arch/arm/dts/tegra114-u-boot.dtsi
new file mode 100644
index 000000000..7c1197255
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra114-u-boot.dtsi
@@ -0,0 +1,3 @@
+#include <config.h>
+
+#include "tegra-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/tegra114.dtsi b/roms/u-boot/arch/arm/dts/tegra114.dtsi
new file mode 100644
index 000000000..8932ea3af
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra114.dtsi
@@ -0,0 +1,787 @@
+#include <dt-bindings/clock/tegra114-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra114-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra114";
+	interrupt-parent = <&lic>;
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra114-host1x", "simple-bus";
+		reg = <0x50000000 0x00028000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x01000000>;
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_DISP1>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_DISP2>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra114-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_HDMI>,
+				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra114-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+				 <&tegra_car TEGRA114_CLK_DSIALP>,
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		dsi@54400000 {
+			compatible = "nvidia,tegra114-dsi";
+			reg = <0x54400000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
+				 <&tegra_car TEGRA114_CLK_DSIBLP>,
+				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x50041000 0x1000>,
+		      <0x50042000 0x1000>,
+		      <0x50044000 0x2000>,
+		      <0x50046000 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra114-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>,
+		      <0x60004400 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra114-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra114-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra114-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb: ahb@6000c000 {
+		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
+		reg = <0x6000c000 0x150>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 246>;
+		*/
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra114-pinmux";
+		reg = <0x70000868 0x148		/* Pad control registers */
+		       0x70003000 0x40c>;	/* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA114_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_RTC>;
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra114-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra114-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra114-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra114-mc";
+		reg = <0x70019000 0x1000>;
+		clocks = <&tegra_car TEGRA114_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	ahub@70080000 {
+		compatible = "nvidia,tegra114-ahub";
+		reg = <0x70080000 0x200>,
+		      <0x70080200 0x100>,
+		      <0x70081000 0x200>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA114_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 154>; /* adx */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "adx";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra114-mipi";
+		reg = <0x700e3000 0x100>;
+		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	sdhci@78000000 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000200 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000400 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000600 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra124-apalis.dts b/roms/u-boot/arch/arm/dts/tegra124-apalis.dts
new file mode 100644
index 000000000..08184ab3a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124-apalis.dts
@@ -0,0 +1,2206 @@
+/*
+ * Copyright 2016-2019 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1",
+		     "nvidia,tegra124";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0000";
+		mmc2 = "/sdhci@700b0400";
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@40";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d004000";
+		usb2 = "/usb@7d008000";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+		avddio-pex-supply = <&vdd_1v05>;
+		avdd-pex-pll-supply = <&vdd_1v05>;
+		avdd-pll-erefe-supply = <&avdd_1v05>;
+		dvddio-pex-supply = <&vdd_1v05>;
+		hvdd-pex-pll-e-supply = <&reg_3v3>;
+		hvdd-pex-supply = <&reg_3v3>;
+		vddio-pex-ctl-supply = <&reg_3v3>;
+
+		/* Apalis PCIe (additional lane Apalis type specific) */
+		pci@1,0 {
+			/* PCIE1_RX/TX and TS_DIFF1/2 left disabled */
+		};
+
+		/* I210 Gigabit Ethernet Controller (On-module) */
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
+
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAM1_MCLK */
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 { /* DAP1_RESET */
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_CEC */
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_HPD */
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C4 (DDC) */
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc1_cd_n_pv3 { /* CD# GPIO */
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 { /* D5 GPIO */
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 { /* D4 GPIO */
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 { /* D7 GPIO */
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM */
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* PWM3 active on pu6 being Apalis BKL1_PWM as well */
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cd_n_pv2 { /* CD# GPIO */
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF */
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			pb1 { /* DCD GPIO */
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk7 { /* RI GPIO */
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_txd_pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rxd_pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_cts_n_pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_rts_n_pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 { /* DSR GPIO */
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 { /* DTR GPIO */
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart4_rxd_pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart4_txd_pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* CORE_PWR_REQ */
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* CPU_PWR_REQ */
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DVFS */
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_DEV_OFF# */
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_RESET# */
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_WAKE# */
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT1# */
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT2# */
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT3# */
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT4# */
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_RESET */
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MCU SPI */
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 { /* MCU_CS */
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 { /* MCU_CSEZP */
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PMIC_CLK_32K */
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PMIC_CPU_OC_INT */
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_I2C */
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_INT_N */
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* RESET_MOCI_CTRL */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT_N */
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_IN */
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Configure level-shifter as output for HDA */
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_OUT */
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_OE */
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO_PI6 aka TMP451 ALERT#/THERM2# */
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_INT */
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pc7 { /* NC */
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 { /* NC */
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 { /* NC */
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 { /* NC */
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg3 { /* NC */
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 { /* NC */
+				nvidia,pins = "pg4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 { /* NC */
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph5 { /* NC */
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 { /* NC */
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 { /* NC */
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 { /* NC */
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 { /* NC */
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 { /* NC */
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 { /* NC */
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi7 { /* NC */
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 { /* NC */
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 { /* NC */
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 { /* NC */
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 { /* NC */
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 { /* NC */
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 { /* NC */
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 { /* NC */
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 { /* NC */
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 { /* NC */
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 { /* NC */
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 { /* NC */
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 { /* NC */
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 { /* NC */
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 { /* NC */
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 { /* NC */
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 { /* NC */
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 { /* NC */
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 { /* NC */
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 { /* NC */
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 { /* NC */
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row5_pr5 { /* NC */
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 { /* NC */
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 { /* NC */
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row8_ps0 { /* NC */
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 { /* NC */
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 { /* NC */
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 { /* NC */
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 { /* NC */
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 { /* NC */
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row16_pt0 { /* NC */
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 { /* NC */
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 { /* NC */
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * PCB Version Indication: V1.2 and later have GPIO_PV0
+			 * wired to GND, was NC before
+			 */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 { /* NC */
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 { /* NC */
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 { /* NC */
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 { /* NC */
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 { /* NC */
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 { /* NC */
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 { /* NC */
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 { /* NC */
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+			 * driver enabled aka not tristated and input driver
+			 * enabled as well as it features some magic properties
+			 * even though the external loopback is disabled and the
+			 * internal loopback used as per
+			 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+			 * bits being set to 0xfffd according to the TRM!
+			 */
+			sdmmc3_clk_lb_out_pee4 { /* NC */
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart";
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart";
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		compatible = "nvidia,tegra124-hsuart";
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
+	 * on carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/*
+	 * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
+	 * (e.g. display EDID)
+	 */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <10000>;
+	};
+
+	/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			VDDA-supply = <&reg_3v3>;
+			VDDIO-supply = <&vddio_1v8>;
+			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			ams,system-power-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio2_7 {
+					pins = "gpio2", /* PWR_EN_+V3.3 */
+					       "gpio7"; /* +V1.6_LPO */
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio0_1_3_4_5_6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&reg_3v3>;
+				vsup-sd3-supply = <&reg_3v3>;
+				vsup-sd4-supply = <&reg_3v3>;
+				vsup-sd5-supply = <&reg_3v3>;
+				vin-ldo0-supply = <&vddio_ddr_1v35>;
+				vin-ldo1-6-supply = <&reg_3v3>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&reg_3v3>;
+				vin-ldo9-10-supply = <&reg_3v3>;
+				vin-ldo11-supply = <&reg_3v3>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_ddr_1v35: sd2 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05: sd4 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05: ldo0 {
+					regulator-name = "+V1.05_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_sdmmc1: ldo1 {
+					regulator-name = "VDDIO_SDMMC1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2 {
+					regulator-name = "+V1.2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+V1.05_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				/* 1.8V for LVDS, 3.3V for eDP */
+				ldo4 {
+					regulator-name = "AVDD_LVDS0_PLL";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				/* LDO5 not used */
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				/* LDO7 not used */
+
+				ldo9 {
+					regulator-name = "+V3.3_ETH(ldo9)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo10 {
+					regulator-name = "+V3.3_ETH(ldo10)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo11 {
+					regulator-name = "+V1.8_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+
+		/*
+		 * TMP451 temperature sensor
+		 * Note: THERM_N directly connected to AS3722 PMIC THERM
+		 */
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		spidev0: spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	/* SPI2: MCU SPI */
+	spi@7000d600 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI4: Apalis SPI2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		spidev1: spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set power_off bit in ResetControl register of AS3722 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	/* Apalis Serial ATA */
+	sata@70020000 {
+		avdd-supply = <&vdd_1v05>;
+		hvdd-supply = <&reg_3v3>;
+		vddio-supply = <&vdd_1v05>;
+		status = "okay";
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		/* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */
+		avddio-pex-supply = <&vdd_1v05>;
+		avdd-pll-erefe-supply = <&avdd_1v05>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05>;
+		avdd-usb-supply = <&reg_3v3>;
+		dvddio-pex-supply = <&vdd_1v05>;
+		hvdd-usb-ss-pll-e-supply = <&reg_3v3>;
+		hvdd-usb-ss-supply = <&reg_3v3>;
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			usb3 {
+				nvidia,lanes = "pcie-0", "pcie-1";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie {
+				nvidia,lanes = "pcie-2", "pcie-3",
+					       "pcie-4";
+				nvidia,function = "pcie";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
+
+	/* Apalis MMC1 */
+	sdhci@700b0000 {
+		status = "okay";
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* Apalis SD1 */
+	sdhci@700b0400 {
+		status = "okay";
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* eMMC */
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301200 {
+			status = "okay";
+		};
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		/* BKL1_PWM */
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.05_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05>;
+	};
+
+	reg_3v3_mxm: regulator-3v3-mxm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_MXM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		/* PWR_EN_+V3.3 */
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3_mxm>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_1v05>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis TK1";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+
+		mem {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+
+		gpu {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra124-cei-tk1-som.dts b/roms/u-boot/arch/arm/dts/tegra124-cei-tk1-som.dts
new file mode 100644
index 000000000..e5b41f318
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124-cei-tk1-som.dts
@@ -0,0 +1,481 @@
+/dts-v1/;
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "Colorado Engineering TK1-SOM";
+	compatible = "nvidia,cei-tk1-som", "nvidia,tegra124";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0400";
+		spi0 = "/spi@7000d400";
+		spi1 = "/spi@7000da00";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-supply = <&vdd_3v3_lp0>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion PWR_I2C_*, on-board components */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_5_6 {
+					pins = "gpio3", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.05V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+3.3V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	padctl@7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			usb3 {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie {
+				nvidia,lanes = "pcie-0", "pcie-1", "pcie-2", "pcie-3",
+					      "pcie-4";
+				nvidia,function = "pcie";
+				nvidia,iddq = <0>;
+			};
+
+		};
+	};
+
+	sdhci@700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_usb1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+USB0_VBUS_SW";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		/* Molex power connector */
+		vdd_5v0_sata: regulator@13 {
+			compatible = "regulator-fixed";
+			reg = <13>;
+			regulator-name = "+5V_SATA";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_12v0_sata: regulator@14 {
+			compatible = "regulator-fixed";
+			reg = <14>;
+			regulator-name = "+12V_SATA";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_mux>;
+		};
+	};
+};
+
+&uartd {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra124-jetson-tk1.dts b/roms/u-boot/arch/arm/dts/tegra124-jetson-tk1.dts
new file mode 100644
index 000000000..59e080a8a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124-jetson-tk1.dts
@@ -0,0 +1,486 @@
+/dts-v1/;
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TK1";
+	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0400";
+		spi0 = "/spi@7000d400";
+		spi1 = "/spi@7000da00";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-supply = <&vdd_3v3_lp0>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion PWR_I2C_*, on-board components */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_5_6 {
+					pins = "gpio3", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.05V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+3.3V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	padctl@7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			usb3 {
+				nvidia,lanes = "pcie-0", "pcie-1";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie {
+				nvidia,lanes = "pcie-2", "pcie-3",
+					       "pcie-4";
+				nvidia,function = "pcie";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
+
+	sdhci@700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_usb1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+USB0_VBUS_SW";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		/* Molex power connector */
+		vdd_5v0_sata: regulator@13 {
+			compatible = "regulator-fixed";
+			reg = <13>;
+			regulator-name = "+5V_SATA";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_12v0_sata: regulator@14 {
+			compatible = "regulator-fixed";
+			reg = <14>;
+			regulator-name = "+12V_SATA";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_mux>;
+		};
+	};
+};
+
+&uartd {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra124-nyan-big-u-boot.dtsi b/roms/u-boot/arch/arm/dts/tegra124-nyan-big-u-boot.dtsi
new file mode 100644
index 000000000..ddfeba806
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124-nyan-big-u-boot.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include "tegra-u-boot.dtsi"
+
+/ {
+	host1x@50000000 {
+		u-boot,dm-pre-reloc;
+		dc@54200000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	spi@7000d400 {
+		spi-deactivate-delay = <500>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec: cros-ec@0 {
+			ec-interrupt = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra124-nyan-big.dts b/roms/u-boot/arch/arm/dts/tegra124-nyan-big.dts
new file mode 100644
index 000000000..f1c97052a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124-nyan-big.dts
@@ -0,0 +1,1382 @@
+/dts-v1/;
+
+#include "tegra124-nyan.dtsi"
+
+/ {
+	model = "Acer Chromebook 13 CB5-311";
+	compatible = "google,nyan-big", "nvidia,tegra124";
+
+	aliases {
+		console = &uarta;
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		i2c5 = "/i2c@7000d100";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0400";
+		spi0 = "/spi@7000d400";
+		spi1 = "/spi@7000da00";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
+		usb2 = "/usb@7d004000";
+	};
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			display-timings {
+				timing@0 {
+					clock-frequency = <69500000>;
+					hactive = <1366>;
+					vactive = <768>;
+					hsync-len = <32>;
+					hfront-porch = <48>;
+					hback-porch = <20>;
+					vfront-porch = <3>;
+					vback-porch = <13>;
+					vsync-len = <6>;
+				};
+			};
+		};
+
+		dc@54240000 {
+			status = "disabled";
+		};
+
+	};
+
+	panel: panel {
+		compatible = "auo,b133xtn01";
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&dpaux>;
+	};
+
+	sdhci@700b0400 { /* SD Card on this bus */
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-big",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBig";
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: common {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra124-nyan.dtsi b/roms/u-boot/arch/arm/dts/tegra124-nyan.dtsi
new file mode 100644
index 000000000..2b28fe149
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124-nyan.dtsi
@@ -0,0 +1,721 @@
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux@545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	serial@70006000 {
+		/* Debug connector on the bottom of the board near SD card. */
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		acodec: audio-codec@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		trackpad@15 {
+			compatible = "elan,ekth3000";
+			reg = <0x15>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		tpm@20 {
+			compatible = "infineon,slb9645tt";
+			reg = <0x20>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio2_4_7 {
+					pins = "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_6 {
+					pins = "gpio3", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@7000d400 {
+		status = "okay";
+
+		cros_ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <3000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+				};
+
+				battery: sbs-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <10>;
+					power-supplies = <&charger>;
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@0 {
+			compatible = "winbond,w25q32dw";
+			spi-max-frequency = <25000000>;
+			reg = <0>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	sdhci0_pwrseq: sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	sdhci@700b0000 { /* WiFi/BT on this bus */
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		no-1-8-v;
+		non-removable;
+		mmc-pwrseq = <&sdhci0_pwrseq>;
+		vmmc-supply = <&vdd_3v3_lp0>;
+		vqmmc-supply = <&vddio_1v8>;
+		keep-power-in-suspend;
+	};
+
+	sdhci@700b0400 { /* SD Card on this bus */
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		no-1-8-v;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	sdhci@700b0600 { /* eMMC on this bus */
+		status = "okay";
+		bus-width = <8>;
+		no-1-8-v;
+		non-removable;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "disabled";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301100 {
+			status = "okay";
+		};
+	};
+
+	usb@7d000000 { /* Rear external USB port. */
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb1_vbus>;
+	};
+
+	usb@7d004000 { /* Internal webcam. */
+		status = "okay";
+		phy_type = "hsic";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		phy_type = "hsic";
+		vbus-supply = <&vdd_run_cam>;
+	};
+
+	usb@7d008000 { /* Left external USB port. */
+		status = "okay";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		default-brightness-level = <224>;
+		brightness-levels =
+			<  0   1   2   3   4   5   6   7
+			   8   9  10  11  12  13  14  15
+			  16  17  18  19  20  21  22  23
+			  24  25  26  27  28  29  30  31
+			  32  33  34  35  36  37  38  39
+			  40  41  42  43  44  45  46  47
+			  48  49  50  51  52  53  54  55
+			  56  57  58  59  60  61  62  63
+			  64  65  66  67  68  69  70  71
+			  72  73  74  75  76  77  78  79
+			  80  81  82  83  84  85  86  87
+			  88  89  90  91  92  93  94  95
+			  96  97  98  99 100 101 102 103
+			 104 105 106 107 108 109 110 111
+			 112 113 114 115 116 117 118 119
+			 120 121 122 123 124 125 126 127
+			 128 129 130 131 132 133 134 135
+			 136 137 138 139 140 141 142 143
+			 144 145 146 147 148 149 150 151
+			 152 153 154 155 156 157 158 159
+			 160 161 162 163 164 165 166 167
+			 168 169 170 171 172 173 174 175
+			 176 177 178 179 180 181 182 183
+			 184 185 186 187 188 189 190 191
+			 192 193 194 195 196 197 198 199
+			 200 201 202 203 204 205 206 207
+			 208 209 210 211 212 213 214 215
+			 216 217 218 219 220 221 222 223
+			 224 225 226 227 228 229 230 231
+			 232 233 234 235 236 237 238 239
+			 240 241 242 243 244 245 246 247
+			 248 249 250 251 252 253 254 255
+			 256>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;
+			linux,code = <KEY_RESERVED>;
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_led: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "+VDD_LED";
+			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_5v0_ts: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "+5V_VDD_TS_SW";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+5V_USB_SS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_panel: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "+3.3V_PANEL";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			/*
+			 * TODO: find a way to wire this up with the USB EHCI
+			 * controllers so that it can be enabled on demand.
+			 */
+			regulator-always-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+	};
+
+	sound {
+		nvidia,audio-routing =
+			"Headphones", "HPR",
+			"Headphones", "HPL",
+			"Speakers", "SPKR",
+			"Speakers", "SPKL",
+			"Mic Jack", "MICBIAS",
+			"DMICL", "Int Mic",
+			"DMICR", "Int Mic",
+			"IN34", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&acodec>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+		nvidia,mic-det-gpios =
+				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/tegra124-u-boot.dtsi b/roms/u-boot/arch/arm/dts/tegra124-u-boot.dtsi
new file mode 100644
index 000000000..7c1197255
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124-u-boot.dtsi
@@ -0,0 +1,3 @@
+#include <config.h>
+
+#include "tegra-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/tegra124-venice2.dts b/roms/u-boot/arch/arm/dts/tegra124-venice2.dts
new file mode 100644
index 000000000..7e9c6aa18
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124-venice2.dts
@@ -0,0 +1,115 @@
+/dts-v1/;
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Venice2";
+	compatible = "nvidia,venice2", "nvidia,tegra124";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		i2c5 = "/i2c@7000d100";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0400";
+		spi0 = "/spi@7000d400";
+		spi1 = "/spi@7000da00";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra124.dtsi b/roms/u-boot/arch/arm/dts/tegra124.dtsi
new file mode 100644
index 000000000..f473ba28e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra124.dtsi
@@ -0,0 +1,1072 @@
+#include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra124-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/tegra124-car.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra124";
+	interrupt-parent = <&lic>;
+
+
+	pcie@1003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x01003000 0x00000800   /* PADS registers */
+		       0x01003800 0x00000800   /* AFI registers */
+		       0x02000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>;
+		phy-names = "pcie";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra124-host1x", "simple-bus";
+		reg = <0x50000000 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x01000000>;
+
+		dc@54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra124-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		sor@54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x54540000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x545c0000 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x50041000 0x1000>,
+		      <0x50042000 0x2000>,
+		      <0x50044000 0x2000>,
+		      <0x50046000 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x57000000 0x01000000>,
+		      <0x58000000 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x0 0x60004000 0x0 0x100>,
+		      <0x0 0x60004100 0x0 0x100>,
+		      <0x0 0x60004200 0x0 0x100>,
+		      <0x0 0x60004300 0x0 0x100>,
+		      <0x0 0x60004400 0x0 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra124-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		nvidia,external-memory-controller = <&emc>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra124-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x6000c800 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 251>;
+		*/
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x60020000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>,   /* Chip revision */
+		      <0x7000e864 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra124-pinmux";
+		reg = <0x70000868 0x164>, /* Pad control registers */
+		      <0x70003000 0x434>, /* Mux registers */
+		      <0x70000820 0x008>; /* MIPI pad control */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA124_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x7000d100 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_RTC>;
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra124-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra124-mc";
+		reg = <0x70019000 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	emc: emc@7001b000 {
+		compatible = "nvidia,tegra124-emc";
+		reg = <0x7001b000 0x1000>;
+
+		nvidia,memory-controller = <&mc>;
+	};
+
+	sata@70020000 {
+		compatible = "nvidia,tegra124-ahci";
+		reg = <0x70027000 0x2000>, /* AHCI */
+		      <0x70020000 0x7000>; /* SATA */
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SATA>,
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
+			 <&tegra_car TEGRA124_CLK_CML1>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "sata", "sata-oob", "cml1", "pll_e";
+		resets = <&tegra_car 124>,
+			 <&tegra_car 123>,
+			 <&tegra_car 129>;
+		reset-names = "sata", "sata-oob", "sata-cold";
+		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
+		phy-names = "sata-phy";
+		status = "disabled";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+		reg = <0x70030000 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_HDA>,
+			 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	usb@70090000 {
+		compatible = "nvidia,tegra124-xusb";
+		reg = <0x70090000 0x8000>,
+		      <0x70098000 0x1000>,
+		      <0x70099000 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA124_CLK_CLK_M>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra124-xusb-padctl";
+		reg = <0x7009f000 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		#phy-cells = <1>;
+	};
+
+	sdhci@700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x700b0000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@700b0200 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x700b0200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@700b0400 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x700b0400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@700b0600 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x700b0600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x700e2000 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+	};
+
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra124-dfll";
+		reg = <0x70110000 0x100>, /* DFLL control */
+		      <0x70110000 0x100>, /* I2C output control */
+		      <0x70110100 0x100>, /* Integrated I2C controller */
+		      <0x70110200 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,sample-rate = <12500>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
+	ahub@70300000 {
+		compatible = "nvidia,tegra124-ahub";
+		reg = <0x70300000 0x200>,
+		      <0x70300800 0x800>,
+		      <0x70300200 0x600>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA124_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 185>, /* amx1 */
+			 <&tegra_car 154>, /* adx */
+			 <&tegra_car 180>, /* adx1 */
+			 <&tegra_car 186>, /* afc0 */
+			 <&tegra_car 187>, /* afc1 */
+			 <&tegra_car 188>, /* afc2 */
+			 <&tegra_car 189>, /* afc3 */
+			 <&tegra_car 190>, /* afc4 */
+			 <&tegra_car 191>; /* afc5 */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "amx1", "adx", "adx1",
+			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70301000 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x70301000 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70301100 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x70301100 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70301200 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x70301200 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70301300 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x70301300 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70301400 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x70301400 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000>,
+		      <0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d004000 0x4000>,
+		      <0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000>,
+		      <0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+				 <&tegra_car TEGRA124_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA124_CLK_PLL_X>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>,
+				     <&{/cpus/cpu@2}>,
+				     <&{/cpus/cpu@3}>;
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+		};
+
+		mem {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+		};
+
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+		};
+
+		pllx {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra186-p2771-0000-000.dts b/roms/u-boot/arch/arm/dts/tegra186-p2771-0000-000.dts
new file mode 100644
index 000000000..84e850d6f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra186-p2771-0000-000.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+#include "tegra186-p2771-0000.dtsi"
+
+/ {
+	model = "NVIDIA P2771-0000-000";
+	compatible = "nvidia,p2771-0000-000", "nvidia,p2771-0000", "nvidia,tegra186";
+
+	sdhci@3400000 {
+		cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	pcie@10003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			status = "disabled";
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra186-p2771-0000-500.dts b/roms/u-boot/arch/arm/dts/tegra186-p2771-0000-500.dts
new file mode 100644
index 000000000..1ac8ab431
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra186-p2771-0000-500.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+#include "tegra186-p2771-0000.dtsi"
+
+/ {
+	model = "NVIDIA P2771-0000-500";
+	compatible = "nvidia,p2771-0000-500", "nvidia,p2771-0000", "nvidia,tegra186";
+
+	sdhci@3400000 {
+		cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	pcie@10003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			status = "disabled";
+			nvidia,num-lanes = <0>;
+		};
+
+		pci@3,0 {
+			status = "disabled";
+			nvidia,num-lanes = <1>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra186-p2771-0000.dtsi b/roms/u-boot/arch/arm/dts/tegra186-p2771-0000.dtsi
new file mode 100644
index 000000000..7cda0b41f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra186-p2771-0000.dtsi
@@ -0,0 +1,84 @@
+#include "tegra186.dtsi"
+
+/ {
+	model = "NVIDIA P2771-0000";
+	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		ethernet = "/ethernet@2490000";
+		mmc0 = "/sdhci@3460000";
+		mmc1 = "/sdhci@3400000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/i2c@3160000";
+		i2c2 = "/i2c@c240000";
+		i2c3 = "/i2c@3180000";
+		i2c4 = "/i2c@3190000";
+		i2c5 = "/i2c@31c0000";
+		i2c6 = "/i2c@c250000";
+		i2c7 = "/i2c@31e0000";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x60000000>;
+	};
+
+	ethernet@2490000 {
+		status = "okay";
+		phy-reset-gpios = <&gpio_main TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+	};
+
+	i2c@3160000 {
+		status = "okay";
+	};
+
+	i2c@3180000 {
+		status = "okay";
+	};
+
+	i2c@3190000 {
+		status = "okay";
+	};
+
+	i2c@31c0000 {
+		status = "okay";
+	};
+
+	sdhci@3400000 {
+		status = "okay";
+		wp-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@3460000 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	i2c@c240000 {
+		status = "okay";
+	};
+
+	i2c@c250000 {
+		status = "okay";
+	};
+
+	i2c@31e0000 {
+		status = "okay";
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra186-u-boot.dtsi b/roms/u-boot/arch/arm/dts/tegra186-u-boot.dtsi
new file mode 100644
index 000000000..7c1197255
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra186-u-boot.dtsi
@@ -0,0 +1,3 @@
+#include <config.h>
+
+#include "tegra-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/tegra186.dtsi b/roms/u-boot/arch/arm/dts/tegra186.dtsi
new file mode 100644
index 000000000..edcb7aacb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra186.dtsi
@@ -0,0 +1,343 @@
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/tegra186-clock.h>
+#include <dt-bindings/gpio/tegra186-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/power/tegra186-powergate.h>
+#include <dt-bindings/reset/tegra186-reset.h>
+
+/ {
+	compatible = "nvidia,tegra186";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	gpio_main: gpio@2200000 {
+		compatible = "nvidia,tegra186-gpio";
+		reg-names = "security", "gpio";
+		reg =
+			<0x0 0x2200000 0x0 0x10000>,
+			<0x0 0x2210000 0x0 0x10000>;
+		interrupts =
+			<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ethernet@2490000 {
+		compatible = "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10";
+		reg = <0x0 0x02490000 0x0 0x10000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_AXI_CBB>,
+			<&bpmp TEGRA186_CLK_EQOS_AXI>,
+			<&bpmp TEGRA186_CLK_EQOS_RX>,
+			<&bpmp TEGRA186_CLK_EQOS_PTP_REF>,
+			<&bpmp TEGRA186_CLK_EQOS_TX>;
+		clock-names = "slave_bus",
+			"master_bus",
+			"rx",
+			"ptp_ref",
+			"tx";
+		resets = <&bpmp TEGRA186_RESET_EQOS>;
+		reset-names = "eqos";
+		phy-mode = "rgmii";
+		status = "disabled";
+	};
+
+	uarta: serial@3100000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03100000 0x0 0x10000>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	gen1_i2c: i2c@3160000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x3160000 0x0 0x100>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C1>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	cam_i2c: i2c@3180000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x3180000 0x0 0x100>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C3>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	dp_aux_ch1_i2c: i2c@3190000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x3190000 0x0 0x100>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C4>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	dp_aux_ch0_i2c: i2c@31b0000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x31b0000 0x0 0x100>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C6>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	gen7_i2c: i2c@31c0000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x31c0000 0x0 0x100>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C7>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C7>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	gen9_i2c: i2c@31e0000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x31e0000 0x0 0x100>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C9>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C9>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	sdhci@3400000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03400000 0x0 0x200>;
+		resets = <&bpmp TEGRA186_RESET_SDMMC1>;
+		reset-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
+		interrupts = <GIC_SPI 62 0x04>;
+		status = "disabled";
+	};
+
+	sdhci@3460000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03460000 0x0 0x200>;
+		resets = <&bpmp TEGRA186_RESET_SDMMC4>;
+		reset-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
+		interrupts = <GIC_SPI 31 0x04>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@3881000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x3881000 0x0 0x1000>,
+		      <0x0 0x3882000 0x0 0x2000>,
+		      <0x0 0x3884000 0x0 0x2000>,
+		      <0x0 0x3886000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	hsp: hsp@3c00000 {
+		compatible = "nvidia,tegra186-hsp";
+		reg = <0x0 0x03c00000 0x0 0xa0000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "doorbell";
+		#mbox-cells = <2>;
+	};
+
+	gen2_i2c: i2c@c240000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0xc240000 0x0 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C2>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	gen8_i2c: i2c@c250000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0xc250000 0x0 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C8>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C8>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	gpio_aon: gpio@c2f0000 {
+		compatible = "nvidia,tegra186-gpio-aon";
+		reg-names = "security", "gpio";
+		reg =
+			<0x0 0xc2f0000 0x0 0x1000>,
+			<0x0 0xc2f1000 0x0 0x1000>;
+		interrupts =
+			<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie@10003000 {
+		compatible = "nvidia,tegra186-pcie";
+		device_type = "pci";
+		reg = <0x0 0x10003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x10003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* MSI interrupt */
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; /* Wake interrupt */
+		interrupt-names = "intr", "msi", "wake";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0x0        0x0 0x50000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x50100000 0x0 0x50100000 0 0x07f00000   /* non-prefetchable memory (127 MiB) */
+			  0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+
+		clocks = <&bpmp TEGRA186_CLK_PCIE>,
+			 <&bpmp TEGRA186_CLK_AFI>;
+		clock-names = "pex", "afi";
+		resets = <&bpmp TEGRA186_RESET_PCIE>,
+			 <&bpmp TEGRA186_RESET_AFI>,
+			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
+		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	sysram@30000000 {
+		compatible = "nvidia,tegra186-sysram", "mmio-sram";
+		reg = <0x0 0x30000000 0x0 0x50000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
+
+		sysram_cpu_bpmp_tx: shmem@4e000 {
+			compatible = "nvidia,tegra186-bpmp-shmem";
+			reg = <0x0 0x4e000 0x0 0x1000>;
+		};
+
+		sysram_cpu_bpmp_rx: shmem@4f000 {
+			compatible = "nvidia,tegra186-bpmp-shmem";
+			reg = <0x0 0x4f000 0x0 0x1000>;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra186-bpmp";
+		mboxes = <&hsp HSP_MBOX_TYPE_DB HSP_DB_MASTER_BPMP>;
+		/*
+		 * In theory, these references, and the configuration in the
+		 * node these reference point at, are board-specific, since
+		 * they depend on the BCT's memory carve-out setup, the
+		 * firmware that's actually loaded onto the BPMP, etc. However,
+		 * in practice, all boards are likely to use identical values.
+		 */
+		shmem = <&sysram_cpu_bpmp_tx &sysram_cpu_bpmp_rx>;
+		#clock-cells = <1>;
+		#power-domain-cells = <1>;
+		#reset-cells = <1>;
+
+		bpmp_i2c: i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-colibri.dts b/roms/u-boot/arch/arm/dts/tegra20-colibri.dts
new file mode 100644
index 000000000..11023968f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-colibri.dts
@@ -0,0 +1,168 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "Toradex Colibri T20";
+	compatible = "toradex,colibri_t20", "nvidia,tegra20";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		mmc0 = "/sdhci@c8000600";
+		usb0 = "/usb@c5000000";
+		usb1 = "/usb@c5004000"; /* On-module only, for ASIX */
+		usb2 = "/usb@c5008000";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+				display-timings {
+					timing@0 {
+						/* VESA VGA */
+						clock-frequency = <25175000>;
+						hactive = <640>;
+						vactive = <480>;
+						hback-porch = <48>;
+						hfront-porch = <16>;
+						hsync-len = <96>;
+						vback-porch = <31>;
+						vfront-porch = <11>;
+						vsync-len = <2>;
+					};
+				};
+			};
+		};
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+		nvidia,width = <8>;
+		nvidia,timing = <15 100 25 80 25 10 15 10 100>;
+
+		nand@0 {
+			reg = <0>;
+			compatible = "nand-flash";
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to PMIC and temperature sensor
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	/* EHCI instance 1: ULPI -> USB3340 -> AX88772B */
+	usb@c5004000 {
+		status = "okay";
+		/* ULPI_RESET */
+		nvidia,phy-reset-gpio =
+				<&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+		/* VBUS_LAN */
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@c5008000 {
+		status = "okay";
+		/* USBH_PEN */
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		/* PWM<A> */
+		pwms = <&pwm 0 5000000>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	lcd_panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+
+		backlight = <&backlight>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+V3.3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-harmony.dts b/roms/u-boot/arch/arm/dts/tegra20-harmony.dts
new file mode 100644
index 000000000..7fe7d5209
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-harmony.dts
@@ -0,0 +1,818 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Harmony evaluation board";
+	compatible = "nvidia,harmony", "nvidia,tegra20";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+		usb0 = "/usb@c5000000";
+		usb1 = "/usb@c5004000";
+		usb2 = "/usb@c5008000";
+		mmc0 = "/sdhci@c8000600";
+		mmc1 = "/sdhci@c8000200";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+
+				display-timings {
+					timing@0 {
+						/* Seaboard has 1366x768 */
+						clock-frequency = <42430000>;
+						hactive = <1024>;
+						vactive = <600>;
+						hback-porch = <138>;
+						hfront-porch = <34>;
+						hsync-len = <136>;
+						vback-porch = <21>;
+						vfront-porch = <4>;
+						vsync-len = <4>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+		clock-frequency = < 216000000 >;
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				pci_clk_reg: ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <2>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+				MATRIX_KEY(0x00, 0x03, KEY_S)
+				MATRIX_KEY(0x00, 0x04, KEY_A)
+				MATRIX_KEY(0x00, 0x05, KEY_Z)
+				MATRIX_KEY(0x00, 0x07, KEY_FN)
+				MATRIX_KEY(0x01, 0x07, KEY_MENU)
+				MATRIX_KEY(0x02, 0x06, KEY_LEFTALT)
+				MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT)
+				MATRIX_KEY(0x03, 0x00, KEY_5)
+				MATRIX_KEY(0x03, 0x01, KEY_4)
+				MATRIX_KEY(0x03, 0x02, KEY_R)
+				MATRIX_KEY(0x03, 0x03, KEY_E)
+				MATRIX_KEY(0x03, 0x04, KEY_F)
+				MATRIX_KEY(0x03, 0x05, KEY_D)
+				MATRIX_KEY(0x03, 0x06, KEY_X)
+				MATRIX_KEY(0x04, 0x00, KEY_7)
+				MATRIX_KEY(0x04, 0x01, KEY_6)
+				MATRIX_KEY(0x04, 0x02, KEY_T)
+				MATRIX_KEY(0x04, 0x03, KEY_H)
+				MATRIX_KEY(0x04, 0x04, KEY_G)
+				MATRIX_KEY(0x04, 0x05, KEY_V)
+				MATRIX_KEY(0x04, 0x06, KEY_C)
+				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+				MATRIX_KEY(0x05, 0x00, KEY_9)
+				MATRIX_KEY(0x05, 0x01, KEY_8)
+				MATRIX_KEY(0x05, 0x02, KEY_U)
+				MATRIX_KEY(0x05, 0x03, KEY_Y)
+				MATRIX_KEY(0x05, 0x04, KEY_J)
+				MATRIX_KEY(0x05, 0x05, KEY_N)
+				MATRIX_KEY(0x05, 0x06, KEY_B)
+				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+				MATRIX_KEY(0x06, 0x01, KEY_0)
+				MATRIX_KEY(0x06, 0x02, KEY_O)
+				MATRIX_KEY(0x06, 0x03, KEY_I)
+				MATRIX_KEY(0x06, 0x04, KEY_L)
+				MATRIX_KEY(0x06, 0x05, KEY_K)
+				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+				MATRIX_KEY(0x06, 0x07, KEY_M)
+				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+				MATRIX_KEY(0x07, 0x07, KEY_MENU)
+				MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT)
+				MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT)
+				MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL)
+				MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL)
+				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+				MATRIX_KEY(0x0B, 0x01, KEY_P)
+				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+				MATRIX_KEY(0x0C, 0x00, KEY_F10)
+				MATRIX_KEY(0x0C, 0x01, KEY_F9)
+				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+				MATRIX_KEY(0x0C, 0x03, KEY_3)
+				MATRIX_KEY(0x0C, 0x04, KEY_2)
+				MATRIX_KEY(0x0C, 0x05, KEY_UP)
+				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+				MATRIX_KEY(0x0E, 0x00, KEY_F11)
+				MATRIX_KEY(0x0E, 0x01, KEY_F12)
+				MATRIX_KEY(0x0E, 0x02, KEY_F8)
+				MATRIX_KEY(0x0E, 0x03, KEY_Q)
+				MATRIX_KEY(0x0E, 0x04, KEY_F4)
+				MATRIX_KEY(0x0E, 0x05, KEY_F3)
+				MATRIX_KEY(0x0E, 0x06, KEY_1)
+				MATRIX_KEY(0x0E, 0x07, KEY_F7)
+				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+				MATRIX_KEY(0x0F, 0x02, KEY_F5)
+				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+				MATRIX_KEY(0x0F, 0x04, KEY_F1)
+				MATRIX_KEY(0x0F, 0x05, KEY_F2)
+				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+				MATRIX_KEY(0x0F, 0x07, KEY_F6)
+				MATRIX_KEY(0x14, 0x00, KEY_KP7)
+				MATRIX_KEY(0x15, 0x00, KEY_KP9)
+				MATRIX_KEY(0x15, 0x01, KEY_KP8)
+				MATRIX_KEY(0x15, 0x02, KEY_KP4)
+				MATRIX_KEY(0x15, 0x04, KEY_KP1)
+				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+				MATRIX_KEY(0x16, 0x02, KEY_KP6)
+				MATRIX_KEY(0x16, 0x03, KEY_KP5)
+				MATRIX_KEY(0x16, 0x04, KEY_KP3)
+				MATRIX_KEY(0x16, 0x05, KEY_KP2)
+				MATRIX_KEY(0x16, 0x07, KEY_KP0)
+				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+				MATRIX_KEY(0x1D, 0x04, KEY_END)
+				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP)
+				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN)
+				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+				MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	pcie@80003000 {
+		status = "okay";
+
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000200 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <8>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "auo,b101aw03", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		pci_vdd_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_1v05";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_pnl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_5v0_hdmi: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "VDDIO_HDMI";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-harmony",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Harmony";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
+
+&uartd {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-medcom-wide.dts b/roms/u-boot/arch/arm/dts/tegra20-medcom-wide.dts
new file mode 100644
index 000000000..1c79d7574
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide";
+	compatible = "ad,medcom-wide", "nvidia,tegra20";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		mmc0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		status = "okay";
+
+		dc@54200000 {
+			status = "okay";
+
+			rgb {
+				nvidia,panel = <&lcd_panel>;
+				status = "okay";
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_panel: panel {
+		clock = <61715000>;
+		xres = <1366>;
+		yres = <768>;
+		left-margin = <2>;
+		right-margin = <47>;
+		hsync-len = <136>;
+		lower-margin = <21>;
+		upper-margin = <11>;
+		vsync-len = <4>;
+
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 500000>;
+		nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(B, 5)
+							GPIO_ACTIVE_HIGH>;
+		nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
+							GPIO_ACTIVE_HIGH>;
+		nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+							GPIO_ACTIVE_HIGH>;
+		nvidia,panel-timings = <0 0 0 0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-paz00.dts b/roms/u-boot/arch/arm/dts/tegra20-paz00.dts
new file mode 100644
index 000000000..ecf9fbd2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-paz00.dts
@@ -0,0 +1,636 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
+		usb0 = "/usb@c5000000";
+		usb1 = "/usb@c5004000";
+		usb2 = "/usb@c5008000";
+		mmc0 = "/sdhci@c8000600";
+		mmc1 = "/sdhci@c8000000";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+
+				display-timings {
+					timing@0 {
+						/* PAZ00 has 1024x600 */
+						clock-frequency = <54030000>;
+						hactive = <1024>;
+						vactive = <600>;
+						hback-porch = <160>;
+						hfront-porch = <24>;
+						hsync-len = <136>;
+						vback-porch = <3>;
+						vfront-porch = <61>;
+						vsync-len = <6>;
+						hsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"dap2", "gmb", "gmc", "gmd", "spia",
+					"spib", "spic", "spid", "spie";
+				nvidia,function = "gmi";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "pllc_out1";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gpu {
+				nvidia,pins = "gpu", "sdb", "sdd";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			kbcb {
+				nvidia,pins = "kbcb", "kbcd";
+				nvidia,function = "sdio2";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdc {
+				nvidia,pins = "sdc";
+				nvidia,function = "twc";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spi4";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "rsvd2";
+			};
+			spif {
+				nvidia,pins = "spif", "uac";
+				nvidia,function = "rsvd4";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "spdif";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dap2", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme",
+					"gpu", "gpu7", "gpv", "i2cp", "pta",
+					"rm", "sdio1", "slxk", "spdo", "uac",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap3", "dap4", "dtb",
+					"dtc", "dte", "slxa", "slxc", "slxd",
+					"spdi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib", "spid",
+					"spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "irrx", "irtx", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"spic", "spig", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
+					"spie", "spih", "uad", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhs", "lsc0", "lspi",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_lcsn {
+				nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
+					"lm0", "lm1", "lpp", "lpw0", "lpw1",
+					"lpw2", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "lvp1", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006200 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lvds_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		alc5632: alc5632@1e {
+			compatible = "realtek,alc5632";
+			reg = <0x1e>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	nvec@7000c500 {
+		compatible = "nvidia,nvec";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <80000>;
+		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		slave-addr = <138>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+		         <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&p5valw_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "+1.2vs_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "+1.0vs_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "+3.7vs_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "+1.1vs_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2vs_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "+3.3vs_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "+2.85vs_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					/*
+					 * Research indicates this should be
+					 * 1.8v; other boards that use this
+					 * rail for the same purpose need it
+					 * set to 1.8v. The schematic signal
+					 * name is incorrect; perhaps copied
+					 * from an incorrect NVIDIA reference.
+					 */
+					regulator-name = "+2.85vs_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "+3.3vs_rtc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <10>;
+
+		backlight-boot-off;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wifi {
+			label = "wifi-led";
+			gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "rfkill0";
+		};
+	};
+
+	panel: panel {
+		compatible = "samsung,ltn101nt05", "simple-panel";
+
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		p5valw_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+5valw";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdd_pnl_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+3VS,vdd_pnl";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-alc5632-paz00",
+			"nvidia,tegra-audio-alc5632";
+
+		nvidia,model = "Compal PAZ00";
+
+		nvidia,audio-routing =
+			"Int Spk", "SPKOUT",
+			"Int Spk", "SPKOUTN",
+			"Headset Mic", "MICBIAS1",
+			"MIC1", "Headset Mic",
+			"Headset Stereophone", "HPR",
+			"Headset Stereophone", "HPL",
+			"DMICDAT", "Digital Mic";
+
+		nvidia,audio-codec = <&alc5632>;
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+		         <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+		         <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-plutux.dts b/roms/u-boot/arch/arm/dts/tegra20-plutux.dts
new file mode 100644
index 000000000..1b642be99
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-plutux.dts
@@ -0,0 +1,41 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Plutux";
+	compatible = "ad,plutux", "nvidia,tegra20";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		mmc0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-seaboard.dts b/roms/u-boot/arch/arm/dts/tegra20-seaboard.dts
new file mode 100644
index 000000000..341c7f358
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-seaboard.dts
@@ -0,0 +1,984 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Seaboard";
+	compatible = "nvidia,seaboard", "nvidia,tegra20";
+
+	aliases {
+		/* This defines the order of our ports */
+		usb0 = "/usb@c5000000";
+		usb1 = "/usb@c5004000";
+		usb2 = "/usb@c5008000";
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+		mmc0 = "/sdhci@c8000600";
+		mmc1 = "/sdhci@c8000400";
+	};
+
+	chosen {
+		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
+	};
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+
+				display-timings {
+					timing@0 {
+						/* Seaboard has 1366x768 */
+						clock-frequency = <70600000>;
+						hactive = <1366>;
+						vactive = <768>;
+						hback-porch = <58>;
+						hfront-porch = <58>;
+						hsync-len = <58>;
+						vback-porch = <4>;
+						vfront-porch = <4>;
+						vsync-len = <4>;
+						hsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
+					"lsck", "lsda";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc", "gmd",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxd", "slxk", "spdi", "spdo", "uac",
+					"uad", "uca", "ucb", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3",
+					"gpv", "owc", "slxc", "spib", "spid",
+					"spie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spia",
+					"spig", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "spic", "uaa",
+					"uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+		clock-frequency = < 216000000 >;
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gyrometer@68 {
+			compatible = "invn,mpu3050";
+			reg = <0x68>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "smart-battery-1.1";
+				reg = <0xb>;
+				ti,i2c-retry-count = <2>;
+				ti,poll-retry-count = <10>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0xc>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <32>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,ghost-filter;
+		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+				MATRIX_KEY(0x00, 0x03, KEY_S)
+				MATRIX_KEY(0x00, 0x04, KEY_A)
+				MATRIX_KEY(0x00, 0x05, KEY_Z)
+				MATRIX_KEY(0x00, 0x07, KEY_FN)
+
+				MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA)
+				MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT)
+				MATRIX_KEY(0x02, 0x07, KEY_LEFTALT)
+
+				MATRIX_KEY(0x03, 0x00, KEY_5)
+				MATRIX_KEY(0x03, 0x01, KEY_4)
+				MATRIX_KEY(0x03, 0x02, KEY_R)
+				MATRIX_KEY(0x03, 0x03, KEY_E)
+				MATRIX_KEY(0x03, 0x04, KEY_F)
+				MATRIX_KEY(0x03, 0x05, KEY_D)
+				MATRIX_KEY(0x03, 0x06, KEY_X)
+
+				MATRIX_KEY(0x04, 0x00, KEY_7)
+				MATRIX_KEY(0x04, 0x01, KEY_6)
+				MATRIX_KEY(0x04, 0x02, KEY_T)
+				MATRIX_KEY(0x04, 0x03, KEY_H)
+				MATRIX_KEY(0x04, 0x04, KEY_G)
+				MATRIX_KEY(0x04, 0x05, KEY_V)
+				MATRIX_KEY(0x04, 0x06, KEY_C)
+				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+
+				MATRIX_KEY(0x05, 0x00, KEY_9)
+				MATRIX_KEY(0x05, 0x01, KEY_8)
+				MATRIX_KEY(0x05, 0x02, KEY_U)
+				MATRIX_KEY(0x05, 0x03, KEY_Y)
+				MATRIX_KEY(0x05, 0x04, KEY_J)
+				MATRIX_KEY(0x05, 0x05, KEY_N)
+				MATRIX_KEY(0x05, 0x06, KEY_B)
+				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+
+				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+				MATRIX_KEY(0x06, 0x01, KEY_0)
+				MATRIX_KEY(0x06, 0x02, KEY_O)
+				MATRIX_KEY(0x06, 0x03, KEY_I)
+				MATRIX_KEY(0x06, 0x04, KEY_L)
+				MATRIX_KEY(0x06, 0x05, KEY_K)
+				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+				MATRIX_KEY(0x06, 0x07, KEY_M)
+
+				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+				MATRIX_KEY(0x07, 0x07, KEY_MENU)
+
+				MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT)
+				MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT)
+
+				MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL)
+				MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL)
+
+				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+				MATRIX_KEY(0x0B, 0x01, KEY_P)
+				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+
+				MATRIX_KEY(0x0C, 0x00, KEY_F10)
+				MATRIX_KEY(0x0C, 0x01, KEY_F9)
+				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+				MATRIX_KEY(0x0C, 0x03, KEY_3)
+				MATRIX_KEY(0x0C, 0x04, KEY_2)
+				MATRIX_KEY(0x0C, 0x05, KEY_UP)
+				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+
+				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+
+				MATRIX_KEY(0x0E, 0x00, KEY_F11)
+				MATRIX_KEY(0x0E, 0x01, KEY_F12)
+				MATRIX_KEY(0x0E, 0x02, KEY_F8)
+				MATRIX_KEY(0x0E, 0x03, KEY_Q)
+				MATRIX_KEY(0x0E, 0x04, KEY_F4)
+				MATRIX_KEY(0x0E, 0x05, KEY_F3)
+				MATRIX_KEY(0x0E, 0x06, KEY_1)
+				MATRIX_KEY(0x0E, 0x07, KEY_F7)
+
+				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+				MATRIX_KEY(0x0F, 0x02, KEY_F5)
+				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+				MATRIX_KEY(0x0F, 0x04, KEY_F1)
+				MATRIX_KEY(0x0F, 0x05, KEY_F2)
+				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+				MATRIX_KEY(0x0F, 0x07, KEY_F6)
+
+				/* Software Handled Function Keys */
+				MATRIX_KEY(0x14, 0x00, KEY_KP7)
+
+				MATRIX_KEY(0x15, 0x00, KEY_KP9)
+				MATRIX_KEY(0x15, 0x01, KEY_KP8)
+				MATRIX_KEY(0x15, 0x02, KEY_KP4)
+				MATRIX_KEY(0x15, 0x04, KEY_KP1)
+
+				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+				MATRIX_KEY(0x16, 0x02, KEY_KP6)
+				MATRIX_KEY(0x16, 0x03, KEY_KP5)
+				MATRIX_KEY(0x16, 0x04, KEY_KP3)
+				MATRIX_KEY(0x16, 0x05, KEY_KP2)
+				MATRIX_KEY(0x16, 0x07, KEY_KP0)
+
+				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+
+				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+
+				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+				MATRIX_KEY(0x1D, 0x04, KEY_END)
+				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN)
+				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP)
+
+				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+
+				MATRIX_KEY(0x1F, 0x04, KEY_HELP)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	memory-controller@7000f400 {
+		emc-table@190000 {
+			reg = <190000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <190000>;
+			nvidia,emc-registers = <0x0000000c 0x00000026
+				0x00000009 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000c 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x0000059f
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x0000000b 0x000000c8
+				0x00000003 0x00000007 0x00000004 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xa06204ae
+				0x007dc010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+
+		emc-table@380000 {
+			reg = <380000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <380000>;
+			nvidia,emc-registers = <0x00000017 0x0000004b
+				0x00000012 0x00000006 0x00000004 0x00000005
+				0x00000003 0x0000000c 0x00000006 0x00000006
+				0x00000003 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x00000b5f
+				0x00000000 0x00000003 0x00000003 0x00000006
+				0x00000006 0x00000001 0x00000011 0x000000c8
+				0x00000003 0x0000000e 0x00000007 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xe044048b
+				0x007d8010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_vbus_wup1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_pnl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_hdmi: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "VDDIO_HDMI";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-seaboard",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Seaboard";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1R", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-tamonten.dtsi b/roms/u-boot/arch/arm/dts/tegra20-tamonten.dtsi
new file mode 100644
index 000000000..f13ef4d05
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,514 @@
+#include "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		hdmi {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <1>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-tec.dts b/roms/u-boot/arch/arm/dts/tegra20-tec.dts
new file mode 100644
index 000000000..4733c8134
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-tec.dts
@@ -0,0 +1,80 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "ad,tec", "nvidia,tegra20";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		mmc0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		status = "okay";
+
+		dc@54200000 {
+			status = "okay";
+
+			rgb {
+				nvidia,panel = <&lcd_panel>;
+				status = "okay";
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_panel: panel {
+		clock = <33260000>;
+		xres = <800>;
+		yres = <480>;
+		left-margin = <120>;
+		right-margin = <120>;
+		hsync-len = <16>;
+		lower-margin = <15>;
+		upper-margin = <15>;
+		vsync-len = <15>;
+
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 500000>;
+		nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(B, 5)
+							GPIO_ACTIVE_HIGH>;
+		nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
+							GPIO_ACTIVE_HIGH>;
+		nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+							GPIO_ACTIVE_HIGH>;
+		nvidia,panel-timings = <0 0 0 0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-trimslice.dts b/roms/u-boot/arch/arm/dts/tegra20-trimslice.dts
new file mode 100644
index 000000000..e19001ee2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-trimslice.dts
@@ -0,0 +1,135 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		usb0 = "/usb@c5000000";
+		mmc0 = "/sdhci@c8000600";
+		mmc1 = "/sdhci@c8000000";
+		spi0 = "/spi@7000c380";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	serial@70006000 {
+		clock-frequency = <216000000>;
+	};
+
+	spi@7000c380 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	pcie@80003000 {
+		status = "okay";
+
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hdmi_vdd_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "avdd_hdmi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		hdmi_pll_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "avdd_hdmi_pll";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vbus_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pci_clk_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "pci_clk";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		pci_vdd_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "pci_vdd";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+	};
+
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-u-boot.dtsi b/roms/u-boot/arch/arm/dts/tegra20-u-boot.dtsi
new file mode 100644
index 000000000..f64667e54
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-u-boot.dtsi
@@ -0,0 +1,13 @@
+#include <config.h>
+
+#include "tegra-u-boot.dtsi"
+
+
+/ {
+	host1x@50000000 {
+		u-boot,dm-pre-reloc;
+		dc@54200000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20-ventana.dts b/roms/u-boot/arch/arm/dts/tegra20-ventana.dts
new file mode 100644
index 000000000..85cd1e39b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20-ventana.dts
@@ -0,0 +1,729 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Ventana evaluation board";
+	compatible = "nvidia,ventana", "nvidia,tegra20";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+		usb0 = "/usb@c5000000";
+		usb1 = "/usb@c5004000";
+		usb2 = "/usb@c5008000";
+		mmc0 = "/sdhci@c8000600";
+		mmc1 = "/sdhci@c8000400";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+
+				display-timings {
+					timing@0 {
+						/* Seaboard has 1366x768 */
+						clock-frequency = <70600000>;
+						hactive = <1366>;
+						vactive = <768>;
+						hback-porch = <58>;
+						hfront-porch = <58>;
+						hsync-len = <58>;
+						vback-porch = <4>;
+						vfront-porch = <4>;
+						vsync-len = <4>;
+						hsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxc", "slxd", "slxk", "spdi", "spdo",
+					"uac", "uad", "uca", "ucb", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3", "gmd",
+					"gpv", "owc", "spia", "spib", "spic",
+					"spid", "spie", "spig";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+		clock-frequency = < 216000000 >;	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_pnl_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-ventana",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Ventana";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra20.dtsi b/roms/u-boot/arch/arm/dts/tegra20.dtsi
new file mode 100644
index 000000000..275b3432b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra20.dtsi
@@ -0,0 +1,802 @@
+#include <dt-bindings/clock/tegra20-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra20";
+	interrupt-parent = <&lic>;
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra20-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe@54040000 {
+			compatible = "nvidia,tegra20-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra20-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra20-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+		};
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra20-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		tvo@542c0000 {
+			compatible = "nvidia,tegra20-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_TVO>;
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra20-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_DSI>;
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+	};
+
+	timer@50040600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		interrupt-parent = <&intc>;
+		reg = <0x50040600 0x20>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&tegra_car TEGRA20_CLK_TWD>;
+	};
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000
+		       0x50040100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <5 5 2>;
+		arm,tag-latency = <4 4 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra20-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra20-timer";
+		reg = <0x60005000 0x60>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra20-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra20-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1200>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb@6000c000 {
+		compatible = "nvidia,tegra20-ahb";
+		reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra20-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 224>;
+		*/
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000014 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = <0x70000014 0x10   /* Tri-state registers */
+		       0x70000080 0x20   /* Mux registers */
+		       0x700000a0 0x14   /* Pull-up/down registers */
+		       0x70000868 0xa8>; /* Pad control registers */
+	};
+
+	das@70000c00 {
+		compatible = "nvidia,tegra20-das";
+		reg = <0x70000c00 0x80>;
+	};
+
+	tegra_ac97: ac97@70002000 {
+		compatible = "nvidia,tegra20-ac97";
+		reg = <0x70002000 0x200>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_AC97>;
+		resets = <&tegra_car 3>;
+		reset-names = "ac97";
+		dmas = <&apbdma 12>, <&apbdma 12>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	tegra_i2s1: i2s@70002800 {
+		compatible = "nvidia,tegra20-i2s";
+		reg = <0x70002800 0x200>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_I2S1>;
+		resets = <&tegra_car 11>;
+		reset-names = "i2s";
+		dmas = <&apbdma 2>, <&apbdma 2>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	tegra_i2s2: i2s@70002a00 {
+		compatible = "nvidia,tegra20-i2s";
+		reg = <0x70002a00 0x200>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_I2S2>;
+		resets = <&tegra_car 18>;
+		reset-names = "i2s";
+		dmas = <&apbdma 1>, <&apbdma 1>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
+	 * driver, the compatible is "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uarte: serial@70006400 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
+		resets = <&tegra_car 66>;
+		reset-names = "serial";
+		dmas = <&apbdma 20>, <&apbdma 20>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	nand: nand-controller@70008000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra20-nand";
+		reg = <0x70008000 0x100>;
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA20_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_RTC>;
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C1>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000c380 {
+		compatible = "nvidia,tegra20-sflash";
+		reg = <0x7000c380 0x80>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SPI>;
+		resets = <&tegra_car 43>;
+		reset-names = "spi";
+		dmas = <&apbdma 11>, <&apbdma 11>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C2>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra20-i2c-dvc";
+		reg = <0x7000d000 0x200>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_DVC>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC1>;
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC3>;
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC4>;
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra20-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	memory-controller@7000f000 {
+		compatible = "nvidia,tegra20-mc";
+		reg = <0x7000f000 0x024
+		       0x7000f03c 0x3c4>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	iommu@7000f024 {
+		compatible = "nvidia,tegra20-gart";
+		reg = <0x7000f024 0x00000018	/* controller registers */
+		       0x58000000 0x02000000>;	/* GART aperture */
+	};
+
+	memory-controller@7000f400 {
+		compatible = "nvidia,tegra20-emc";
+		reg = <0x7000f400 0x200>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra20-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	pcie@80003000 {
+		compatible = "nvidia,tegra20-pcie";
+		device_type = "pci";
+		reg = <0x80003000 0x00000800   /* PADS registers */
+		       0x80003800 0x00000200   /* AFI registers */
+		       0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
+			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
+			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0xa0000000 0xa0000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA20_CLK_PEX>,
+			 <&tegra_car TEGRA20_CLK_AFI>,
+			 <&tegra_car TEGRA20_CLK_PLL_E>;
+		clock-names = "pex", "afi", "pll_e";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		nvidia,has-legacy-mode;
+		clocks = <&tegra_car TEGRA20_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@c5000000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USBD>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CLK_M>,
+			 <&tegra_car TEGRA20_CLK_USBD>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,has-legacy-mode;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA20_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@c5004000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5004000 0x4000>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA20_CLK_USB2>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CDEV2>;
+		clock-names = "reg", "pll_u", "ulpi-link";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		status = "disabled";
+	};
+
+	usb@c5008000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@c5008000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USB3>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CLK_M>,
+			 <&tegra_car TEGRA20_CLK_USBD>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		status = "disabled";
+	};
+
+	sdhci@c8000000 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@c8000200 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@c8000400 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@c8000600 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra210-p2371-0000.dts b/roms/u-boot/arch/arm/dts/tegra210-p2371-0000.dts
new file mode 100644
index 000000000..539e7cef9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra210-p2371-0000.dts
@@ -0,0 +1,64 @@
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA P2371-0000";
+	compatible = "nvidia,p2371-0000", "nvidia,tegra210";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0000";
+		usb0 = "/usb@7d000000";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	sdhci@700b0000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra210-p2371-2180.dts b/roms/u-boot/arch/arm/dts/tegra210-p2371-2180.dts
new file mode 100644
index 000000000..649c16315
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra210-p2371-2180.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA P2371-2180";
+	compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0000";
+		usb0 = "/usb@7d000000";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	padctl@7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			xusb {
+				nvidia,lanes = "otg-1", "otg-2";
+				nvidia,function = "xusb";
+				nvidia,iddq = <0>;
+			};
+
+			usb3 {
+				nvidia,lanes = "pcie-5", "pcie-6";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie-x1 {
+				nvidia,lanes = "pcie-0";
+				nvidia,function = "pcie-x1";
+				nvidia,iddq = <0>;
+			};
+
+			pcie-x4 {
+				nvidia,lanes = "pcie-1", "pcie-2",
+					       "pcie-3", "pcie-4";
+				nvidia,function = "pcie-x4";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
+
+	sdhci@700b0000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra210-p2571.dts b/roms/u-boot/arch/arm/dts/tegra210-p2571.dts
new file mode 100644
index 000000000..16370c596
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra210-p2571.dts
@@ -0,0 +1,111 @@
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA P2571";
+	compatible = "nvidia,p2571", "nvidia,tegra210";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		i2c5 = "/i2c@7000d100";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0000";
+		spi0 = "/spi@7000d400";
+		spi1 = "/spi@7000da00";
+		spi2 = "/spi@70410000";
+		usb0 = "/usb@7d000000";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	spi@70410000 {
+		status = "okay";
+		spi-max-frequency = <24000000>;
+	};
+
+	sdhci@700b0000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra210-p3450-0000.dts b/roms/u-boot/arch/arm/dts/tegra210-p3450-0000.dts
new file mode 100644
index 000000000..9ef744ac8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra210-p3450-0000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  (C) Copyright 2019-2020 NVIDIA Corporation <www.nvidia.com>
+ */
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Nano Developer Kit";
+	compatible = "nvidia,p3450-0000", "nvidia,tegra210";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0";
+		i2c0 = "/i2c@7000d000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0000";
+		spi0 = "/spi@70410000";
+		usb0 = "/usb@7d000000";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+
+			ethernet@0,0 {
+				reg = <0x000000 0 0 0 0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			xusb {
+				nvidia,lanes = "otg-1", "otg-2";
+				nvidia,function = "xusb";
+				nvidia,iddq = <0>;
+			};
+
+			usb3 {
+				nvidia,lanes = "pcie-5", "pcie-6";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie-x1 {
+				nvidia,lanes = "pcie-0";
+				nvidia,function = "pcie-x1";
+				nvidia,iddq = <0>;
+			};
+
+			pcie-x4 {
+				nvidia,lanes = "pcie-1", "pcie-2",
+					       "pcie-3", "pcie-4";
+				nvidia,function = "pcie-x4";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
+
+	sdhci@700b0000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@70410000 {
+		status = "okay";
+		spi-max-frequency = <80000000>;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra210-u-boot.dtsi b/roms/u-boot/arch/arm/dts/tegra210-u-boot.dtsi
new file mode 100644
index 000000000..7c1197255
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra210-u-boot.dtsi
@@ -0,0 +1,3 @@
+#include <config.h>
+
+#include "tegra-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/tegra210.dtsi b/roms/u-boot/arch/arm/dts/tegra210.dtsi
new file mode 100644
index 000000000..a521a43d6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra210.dtsi
@@ -0,0 +1,887 @@
+#include <dt-bindings/clock/tegra210-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra210-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+
+/ {
+	compatible = "nvidia,tegra210";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	pcie@1003000 {
+		compatible = "nvidia,tegra210-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+			 <&tegra_car TEGRA210_CLK_AFI>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>,
+			 <&tegra_car TEGRA210_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>;
+		phy-names = "pcie";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra210-host1x", "simple-bus";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>;
+
+		dpaux1: dpaux@54040000 {
+			compatible = "nvidia,tegra210-dpaux";
+			reg = <0x0 0x54040000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DPAUX1>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 207>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra210-vi";
+			reg = <0x0 0x54080000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		tsec@54100000 {
+			compatible = "nvidia,tegra210-tsec";
+			reg = <0x0 0x54100000 0x0 0x00040000>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra210-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DISP1>,
+				 <&tegra_car TEGRA210_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra210-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DISP2>,
+				 <&tegra_car TEGRA210_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra210-dsi";
+			reg = <0x0 0x54300000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA210_CLK_DSIA>,
+				 <&tegra_car TEGRA210_CLK_DSIALP>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		vic@54340000 {
+			compatible = "nvidia,tegra210-vic";
+			reg = <0x0 0x54340000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		nvjpg@54380000 {
+			compatible = "nvidia,tegra210-nvjpg";
+			reg = <0x0 0x54380000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		dsi@54400000 {
+			compatible = "nvidia,tegra210-dsi";
+			reg = <0x0 0x54400000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA210_CLK_DSIB>,
+				 <&tegra_car TEGRA210_CLK_DSIBLP>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		nvdec@54480000 {
+			compatible = "nvidia,tegra210-nvdec";
+			reg = <0x0 0x54480000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		nvenc@544c0000 {
+			compatible = "nvidia,tegra210-nvenc";
+			reg = <0x0 0x544c0000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		tsec@54500000 {
+			compatible = "nvidia,tegra210-tsec";
+			reg = <0x0 0x54500000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		sor@54540000 {
+			compatible = "nvidia,tegra210-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>,
+				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		sor@54580000 {
+			compatible = "nvidia,tegra210-sor1";
+			reg = <0x0 0x54580000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_SOR1>,
+				 <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>,
+				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 183>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+
+		isp@54600000 {
+			compatible = "nvidia,tegra210-isp";
+			reg = <0x0 0x54600000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		isp@54680000 {
+			compatible = "nvidia,tegra210-isp";
+			reg = <0x0 0x54680000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@546c0000 {
+			compatible = "nvidia,tegra210-i2c-vi";
+			reg = <0x0 0x546c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x2000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@57000000 {
+		compatible = "nvidia,gm20b";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA210_CLK_GPU>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
+			 <&tegra_car TEGRA210_CLK_PLL_G_REF>;
+		clock-names = "gpu", "pwr", "ref";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra210-ictlr";
+		reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */
+		      <0x0 0x60004100 0x0 0x40>, /* secondary controller */
+		      <0x0 0x60004200 0x0 0x40>, /* tertiary controller */
+		      <0x0 0x60004300 0x0 0x40>, /* quaternary controller */
+		      <0x0 0x60004400 0x0 0x40>, /* quinary controller */
+		      <0x0 0x60004500 0x0 0x40>; /* senary controller */
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+		clock-names = "timer";
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra210-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra210-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_APBDMA>;
+		clock-names = "dma";
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@700008d4 {
+		compatible = "nvidia,tegra210-pinmux";
+		reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x294>; /* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performance. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTA>;
+		clock-names = "serial";
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTB>;
+		clock-names = "serial";
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTC>;
+		clock-names = "serial";
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTD>;
+		clock-names = "serial";
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA210_CLK_PWM>;
+		clock-names = "pwm";
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra210-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra210-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra210-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA210_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_HDA>,
+		         <&tegra_car TEGRA210_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA210_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra210-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+		#phy-cells = <1>;
+	};
+
+	sdhci@700b0000 {
+		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@700b0200 {
+		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@700b0400 {
+		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@700b0600 {
+		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra210-mipi";
+		reg = <0x0 0x700e3000 0x0 0x100>;
+		clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+		clock-names = "mipi-cal";
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	spi@70410000 {
+		compatible = "nvidia,tegra210-qspi";
+		reg = <0x0 0x70410000 0x0 0x1000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_QSPI>;
+		clock-names = "qspi";
+		resets = <&tegra_car 211>;
+		reset-names = "qspi";
+		dmas = <&apbdma 5>, <&apbdma 5>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "usb";
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USBD>,
+			 <&tegra_car TEGRA210_CLK_PLL_U>,
+			 <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USB2>;
+		clock-names = "usb";
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USB2>,
+			 <&tegra_car TEGRA210_CLK_PLL_U>,
+			 <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra30-apalis.dts b/roms/u-boot/arch/arm/dts/tegra30-apalis.dts
new file mode 100644
index 000000000..77502dfdb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra30-apalis.dts
@@ -0,0 +1,338 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "Toradex Apalis T30";
+	compatible = "toradex,apalis_t30", "nvidia,tegra30";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c500";
+		i2c3 = "/i2c@7000c700";
+		mmc0 = "/sdhci@78000600";
+		mmc1 = "/sdhci@78000400";
+		mmc2 = "/sdhci@78000000";
+		spi0 = "/spi@7000d400";
+		spi1 = "/spi@7000dc00";
+		spi2 = "/spi@7000de00";
+		spi3 = "/spi@7000da00";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d004000";
+		usb2 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+		avdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		avdd-pexb-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
+		avdd-pex-pll-supply = <&vdd2_reg>;
+		avdd-plle-supply = <&ldo6_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_reg>;
+
+		/* Apalis Type Specific 4 Lane PCIe */
+		pci@1,0 {
+			/* TS_DIFF1/2/3/4 left disabled */
+			nvidia,num-lanes = <4>;
+		};
+
+		/* Apalis PCIe */
+		pci@2,0 {
+			/* PCIE1_RX/TX left disabled */
+			nvidia,num-lanes = <1>;
+		};
+
+		/* I210 Gigabit Ethernet Controller (On-module) */
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&sys_3v3_reg>;
+			vcc2-supply = <&sys_3v3_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&sys_3v3_reg>;
+			vcc5-supply = <&sys_3v3_reg>;
+			vcc6-supply = <&vio_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
+			vccio-supply = <&sys_3v3_reg>;
+
+			regulators {
+				/* SW1: +V1.35_VDDIO_DDR */
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				/* SW2: +V1.05 */
+				vdd2_reg: vdd2 {
+					regulator-name =
+						"vdd_pexa,vdd_pexb,vdd_sata";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* SW CTRL: +V1.0_VDD_CPU */
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				/* SWIO: +V1.8 */
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+				 * see also v3_3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "en_3v3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* +V1.2_CSI */
+				ldo3_reg: ldo3 {
+					regulator-name =
+						"avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* +V1.2_VDD_RTC */
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_plle";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				/* +V1.2_AVDD_PLL */
+				ldo7_reg: ldo7 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* +V1.0_VDD_DDR_HS */
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI4: CAN2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI6: CAN1 */
+	spi@7000de00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+	};
+
+	sdhci@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		/* USBO1_EN */
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+		/* USBH_EN */
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+		/* USBH_EN */
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clk@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+		clk16m: clk@1 {
+			compatible = "fixed-clock";
+			reg=<1>;
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "clk16m";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sys_3v3_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra30-beaver.dts b/roms/u-boot/arch/arm/dts/tegra30-beaver.dts
new file mode 100644
index 000000000..9bb097b08
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra30-beaver.dts
@@ -0,0 +1,349 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "NVIDIA Beaver";
+	compatible = "nvidia,beaver", "nvidia,tegra30";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		mmc0 = "/sdhci@78000600";
+		mmc1 = "/sdhci@78000000";
+		spi0 = "/spi@7000da00";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7ff00000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+
+		avdd-pexa-supply = <&ldo1_reg>;
+		vdd-pexa-supply = <&ldo1_reg>;
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		avdd-plle-supply = <&ldo1_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_pexs_reg>;
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v_in_reg>;
+			vcc2-supply = <&vdd_5v_in_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v_in_reg>;
+			vcc5-supply = <&vdd_5v_in_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v_in_reg>;
+			vccio-supply = <&vdd_5v_in_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb@7d008000 {
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v_in_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v_in";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		chargepump_5v_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "chargepump_5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			enable-active-high;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		ddr_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		vdd_5v_sata_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_5v_sata";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		usb1_vbus_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		usb3_vbus_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		sys_3v3_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "sys_3v3,vdd_3v3_alw";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		sys_3v3_pexs_reg: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "sys_3v3_pexs";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_5v0_hdmi: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+VDD_5V_HDMI";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&sys_3v3_reg>;
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra30-cardhu.dts b/roms/u-boot/arch/arm/dts/tegra30-cardhu.dts
new file mode 100644
index 000000000..7534861e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra30-cardhu.dts
@@ -0,0 +1,457 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "NVIDIA Cardhu";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		mmc0 = "/sdhci@78000600";
+		mmc1 = "/sdhci@78000000";
+		spi0 = "/spi@7000da00";
+		usb0 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+
+		/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		avdd-plle-supply = <&ldo2_reg>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_ac_bat_reg>;
+			vcc2-supply = <&vdd_ac_bat_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v0_reg>;
+			vcc5-supply = <&vdd_ac_bat_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_ac_bat_reg>;
+			vccio-supply = <&vdd_ac_bat_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d008000 {
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_ac_bat_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_ac_bat";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		cam_1v8_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "cam_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vio_reg>;
+		};
+
+		cp_5v_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "cp_5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			enable-active-high;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		emmc_3v3_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "emmc_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		modem_3v3_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "modem_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		pex_hvdd_3v3_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "pex_hvdd_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam1_ldo_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "vdd_cam1_ldo";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam2_ldo_reg: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "vdd_cam2_ldo";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam3_ldo_reg: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "vdd_cam3_ldo";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_com_reg: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "vdd_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_fuse_3v3_reg: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "vdd_fuse_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_pnl1_reg: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "vdd_pnl1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_vid_reg: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "vddio_vid";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		ddr_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			regulator-name = "ddr";
+			reg = <100>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "sys_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb1_vbus_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		usb3_vbus_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		vdd_5v0_reg: regulator@104 {
+			compatible = "regulator-fixed";
+			reg = <104>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		vdd_bl_reg: regulator@105 {
+			compatible = "regulator-fixed";
+			reg = <105>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		vdd_bl2_reg: regulator@106 {
+			compatible = "regulator-fixed";
+			reg = <106>;
+			regulator-name = "vdd_bl2";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra30-colibri.dts b/roms/u-boot/arch/arm/dts/tegra30-colibri.dts
new file mode 100644
index 000000000..38afe7819
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra30-colibri.dts
@@ -0,0 +1,112 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "Toradex Colibri T30";
+	compatible = "toradex,colibri_t30", "nvidia,tegra30";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c700";
+		mmc0 = "/sdhci@78000600";
+		mmc1 = "/sdhci@78000200";
+		spi0 = "/spi@7000d400";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d004000"; /* on module only, for ASIX */
+		usb2 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C: unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* SPI1: Colibri SSP */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@78000200 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> AX88772B */
+	usb@7d004000 {
+		status = "okay";
+		/* VBUS_LAN */
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@7d008000 {
+		status = "okay";
+		/* USBH_PEN */
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clk@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&uarta {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra30-tamonten.dtsi b/roms/u-boot/arch/arm/dts/tegra30-tamonten.dtsi
new file mode 100644
index 000000000..33da1754d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra30-tamonten.dtsi
@@ -0,0 +1,86 @@
+#include "tegra30.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten NG";
+	compatible = "ad,tamonten-ng", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000c000";
+		i2c1 = "/i2c@7000c700";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000d000";
+		mmc0 = "/sdhci@78000600";
+		mmc1 = "/sdhci@78000400";
+		mmc2 = "/sdhci@78000000";
+		usb0 = "/usb@7d008000";
+	};
+
+	/* GEN1 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* GEN2 */
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+	};
+
+	/* CAM */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* DDC */
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* PWR */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* SD slot on the base board */
+	sdhci@78000400 {
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	/* EMMC on the COM module */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clk@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra30-tec-ng.dts b/roms/u-boot/arch/arm/dts/tegra30-tec-ng.dts
new file mode 100644
index 000000000..f2a49b8cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra30-tec-ng.dts
@@ -0,0 +1,26 @@
+/dts-v1/;
+
+#include "tegra30-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamontenâ„¢ NG Evaluation Carrier";
+	compatible = "ad,tec-ng", "nvidia,tegra30";
+
+	aliases {
+		i2c0 = "/i2c@7000c400";
+	};
+
+	/* GEN2 */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/* SD card slot */
+	sdhci@78000400 {
+		status = "okay";
+	};
+};
+
+&uartd {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/tegra30-u-boot.dtsi b/roms/u-boot/arch/arm/dts/tegra30-u-boot.dtsi
new file mode 100644
index 000000000..7c1197255
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra30-u-boot.dtsi
@@ -0,0 +1,3 @@
+#include <config.h>
+
+#include "tegra-u-boot.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/tegra30.dtsi b/roms/u-boot/arch/arm/dts/tegra30.dtsi
new file mode 100644
index 000000000..f198bc0ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tegra30.dtsi
@@ -0,0 +1,944 @@
+#include <dt-bindings/clock/tegra30-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra30-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra30";
+	interrupt-parent = <&lic>;
+
+	pcie@3000 {
+		compatible = "nvidia,tegra30-pcie";
+		device_type = "pci";
+		reg = <0x00003000 0x00000800   /* PADS registers */
+		       0x00003800 0x00000200   /* AFI registers */
+		       0x10000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+			 <&tegra_car TEGRA30_CLK_AFI>,
+			 <&tegra_car TEGRA30_CLK_PLL_E>,
+			 <&tegra_car TEGRA30_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra30-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe@54040000 {
+			compatible = "nvidia,tegra30-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra30-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra30-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra30-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+		};
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra30-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra30-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D
+				  &tegra_car TEGRA30_CLK_GR3D2>;
+			clock-names = "3d", "3d2";
+			resets = <&tegra_car 24>,
+				 <&tegra_car 98>;
+			reset-names = "3d", "3d2";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+				 <&tegra_car TEGRA30_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_DISP2>,
+				 <&tegra_car TEGRA30_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra30-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_HDMI>,
+				 <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		tvo@542c0000 {
+			compatible = "nvidia,tegra30-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_TVO>;
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIA>;
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+	};
+
+	timer@50040600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x50040600 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&tegra_car TEGRA30_CLK_TWD>;
+	};
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000
+		       0x50040100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <6 6 2>;
+		arm,tag-latency = <5 5 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra30-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>,
+		      <0x60004400 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra30-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra30-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb: ahb@6000c000 {
+		compatible = "nvidia,tegra30-ahb";
+		reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 248>;
+		*/
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uarte: serial@70006400 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
+		resets = <&tegra_car 66>;
+		reset-names = "serial";
+		dmas = <&apbdma 20>, <&apbdma 20>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA30_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_RTC>;
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C1>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C2>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C3>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C4>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		clock-names = "div-clk", "fast-clk";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C5>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC1>;
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC2>;
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC3>;
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC4>;
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC5>;
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC6>;
+		resets = <&tegra_car 106>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra30-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	mc: memory-controller@7000f000 {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra30-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra30-hda";
+		reg = <0x70030000 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_HDA>,
+			 <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	ahub@70080000 {
+		compatible = "nvidia,tegra30-ahub";
+		reg = <0x70080000 0x200
+		       0x70080200 0x100>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA30_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>;  /* spdif */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	sdhci@78000000 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000200 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000400 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000600 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d004000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/thunderx-88xx.dts b/roms/u-boot/arch/arm/dts/thunderx-88xx.dts
new file mode 100644
index 000000000..22d8f7efb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/thunderx-88xx.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Cavium Thunder DTS file - Thunder board description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "thunderx-88xx.dtsi"
+
+/ {
+	model = "Cavium ThunderX CN88XX board";
+	compatible = "cavium,thunder-88xx";
+
+	aliases {
+		serial0 = &uaa0;
+		serial1 = &uaa1;
+	};
+
+	chosen {
+                stdout-path = &uaa0;
+        };
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x80000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/thunderx-88xx.dtsi b/roms/u-boot/arch/arm/dts/thunderx-88xx.dtsi
new file mode 100644
index 000000000..b8d6f7b31
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/thunderx-88xx.dtsi
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Cavium Thunder DTS file - Thunder SoC description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ */
+
+/ {
+	compatible = "cavium,thunder-88xx";
+	interrupt-parent = <&gic0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x001>;
+			enable-method = "psci";
+		};
+		cpu@002 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x002>;
+			enable-method = "psci";
+		};
+		cpu@003 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x003>;
+			enable-method = "psci";
+		};
+		cpu@004 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x004>;
+			enable-method = "psci";
+		};
+		cpu@005 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x005>;
+			enable-method = "psci";
+		};
+		cpu@006 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x006>;
+			enable-method = "psci";
+		};
+		cpu@007 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x007>;
+			enable-method = "psci";
+		};
+		cpu@008 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x008>;
+			enable-method = "psci";
+		};
+		cpu@009 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x009>;
+			enable-method = "psci";
+		};
+		cpu@00a {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00a>;
+			enable-method = "psci";
+		};
+		cpu@00b {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00b>;
+			enable-method = "psci";
+		};
+		cpu@00c {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00c>;
+			enable-method = "psci";
+		};
+		cpu@00d {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00d>;
+			enable-method = "psci";
+		};
+		cpu@00e {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00e>;
+			enable-method = "psci";
+		};
+		cpu@00f {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00f>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+		cpu@104 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x104>;
+			enable-method = "psci";
+		};
+		cpu@105 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x105>;
+			enable-method = "psci";
+		};
+		cpu@106 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x106>;
+			enable-method = "psci";
+		};
+		cpu@107 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x107>;
+			enable-method = "psci";
+		};
+		cpu@108 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x108>;
+			enable-method = "psci";
+		};
+		cpu@109 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x109>;
+			enable-method = "psci";
+		};
+		cpu@10a {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10a>;
+			enable-method = "psci";
+		};
+		cpu@10b {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10b>;
+			enable-method = "psci";
+		};
+		cpu@10c {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10c>;
+			enable-method = "psci";
+		};
+		cpu@10d {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10d>;
+			enable-method = "psci";
+		};
+		cpu@10e {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10e>;
+			enable-method = "psci";
+		};
+		cpu@10f {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10f>;
+			enable-method = "psci";
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x201>;
+			enable-method = "psci";
+		};
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x202>;
+			enable-method = "psci";
+		};
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x203>;
+			enable-method = "psci";
+		};
+		cpu@204 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x204>;
+			enable-method = "psci";
+		};
+		cpu@205 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x205>;
+			enable-method = "psci";
+		};
+		cpu@206 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x206>;
+			enable-method = "psci";
+		};
+		cpu@207 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x207>;
+			enable-method = "psci";
+		};
+		cpu@208 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x208>;
+			enable-method = "psci";
+		};
+		cpu@209 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x209>;
+			enable-method = "psci";
+		};
+		cpu@20a {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20a>;
+			enable-method = "psci";
+		};
+		cpu@20b {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20b>;
+			enable-method = "psci";
+		};
+		cpu@20c {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20c>;
+			enable-method = "psci";
+		};
+		cpu@20d {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20d>;
+			enable-method = "psci";
+		};
+		cpu@20e {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20e>;
+			enable-method = "psci";
+		};
+		cpu@20f {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20f>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff01>,
+		             <1 14 0xff01>,
+		             <1 11 0xff01>,
+		             <1 10 0xff01>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		refclk50mhz: refclk50mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "refclk50mhz";
+		};
+
+		gic0: interrupt-controller@8010,00000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
+			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
+			interrupts = <1 9 0xf04>;
+		};
+
+		uaa0: serial@87e0,24000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x87e0 0x24000000 0x0 0x1000>;
+			interrupts = <1 21 4>;
+			clocks = <&refclk50mhz>;
+			clock-names = "apb_pclk";
+			uboot,skip-init;
+		};
+
+		uaa1: serial@87e0,25000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x87e0 0x25000000 0x0 0x1000>;
+			interrupts = <1 22 4>;
+			clocks = <&refclk50mhz>;
+			clock-names = "apb_pclk";
+			uboot,skip-init;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/total_compute.dts b/roms/u-boot/arch/arm/dts/total_compute.dts
new file mode 100644
index 000000000..4399269a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/total_compute.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Arm Limited
+ */
+
+/dts-v1/;
+
+/ {
+	model = "total_compute";
+	compatible = "arm,total_compute";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	sysreg: sysreg@1c010000 {
+		compatible = "arm,vexpress-sysreg";
+		reg = <0x0 0x001c010000 0x0 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	fixed_3v3: v2m-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	mmci@1c050000 {
+		compatible = "arm,pl180", "arm,primecell";
+		reg = <0x0 0x001c050000 0x0 0x1000>;
+		cd-gpios = <&sysreg 0 0>;
+		arm,primecell-periphid = <0x00880180>;
+		wp-gpios = <&sysreg 1 0>;
+		bus-width = <8>;
+		max-frequency = <12000000>;
+		vmmc-supply = <&fixed_3v3>;
+		clocks = <&clock24mhz>, <&clock24mhz>;
+		clock-names = "mclk", "apb_pclk";
+	};
+
+	clock24mhz: clock24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "bp:clock24mhz";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tps6507x.dtsi b/roms/u-boot/arch/arm/dts/tps6507x.dtsi
new file mode 100644
index 000000000..4c326e591
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tps6507x.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65070.pdf
+ */
+
+&tps {
+	compatible = "ti,tps6507x";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "VDCDC1";
+		};
+
+		vdcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "VDCDC2";
+		};
+
+		vdcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "VDCDC3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "LDO1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "LDO2";
+		};
+
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tps65217.dtsi b/roms/u-boot/arch/arm/dts/tps65217.dtsi
new file mode 100644
index 000000000..a63272422
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tps65217.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/tps65910.dtsi b/roms/u-boot/arch/arm/dts/tps65910.dtsi
new file mode 100644
index 000000000..b0ac6657a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/tps65910.dtsi
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65910";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vrtc_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "vrtc";
+		};
+
+		vio_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "vio";
+		};
+
+		vdd1_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "vdd1";
+		};
+
+		vdd2_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "vdd2";
+		};
+
+		vdd3_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "vdd3";
+		};
+
+		vdig1_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "vdig1";
+		};
+
+		vdig2_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "vdig2";
+		};
+
+		vpll_reg: regulator@7 {
+			reg = <7>;
+			regulator-compatible = "vpll";
+		};
+
+		vdac_reg: regulator@8 {
+			reg = <8>;
+			regulator-compatible = "vdac";
+		};
+
+		vaux1_reg: regulator@9 {
+			reg = <9>;
+			regulator-compatible = "vaux1";
+		};
+
+		vaux2_reg: regulator@10 {
+			reg = <10>;
+			regulator-compatible = "vaux2";
+		};
+
+		vaux33_reg: regulator@11 {
+			reg = <11>;
+			regulator-compatible = "vaux33";
+		};
+
+		vmmc_reg: regulator@12 {
+			reg = <12>;
+			regulator-compatible = "vmmc";
+		};
+
+		vbb_reg: regulator@13 {
+			reg = <13>;
+			regulator-compatible = "vbb";
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/twl4030.dtsi b/roms/u-boot/arch/arm/dts/twl4030.dtsi
new file mode 100644
index 000000000..6cb0a01e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/twl4030.dtsi
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+       compatible = "ti,twl4030";
+       interrupt-controller;
+       #interrupt-cells = <1>;
+
+       rtc {
+               compatible = "ti,twl4030-rtc";
+               interrupts = <11>;
+       };
+
+       charger: bci {
+               compatible = "ti,twl4030-bci";
+               interrupts = <9>, <2>;
+               bci3v1-supply = <&vusb3v1>;
+       };
+
+       watchdog {
+               compatible = "ti,twl4030-wdt";
+       };
+
+       vaux1: regulator-vaux1 {
+               compatible = "ti,twl4030-vaux1";
+       };
+
+       vaux2: regulator-vaux2 {
+               compatible = "ti,twl4030-vaux2";
+       };
+
+       vaux3: regulator-vaux3 {
+               compatible = "ti,twl4030-vaux3";
+       };
+
+       vaux4: regulator-vaux4 {
+               compatible = "ti,twl4030-vaux4";
+       };
+
+       vcc: regulator-vdd1 {
+               compatible = "ti,twl4030-vdd1";
+               regulator-min-microvolt = <600000>;
+               regulator-max-microvolt = <1450000>;
+       };
+
+       vdac: regulator-vdac {
+               compatible = "ti,twl4030-vdac";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
+
+       vio: regulator-vio {
+               compatible = "ti,twl4030-vio";
+       };
+
+       vintana1: regulator-vintana1 {
+               compatible = "ti,twl4030-vintana1";
+       };
+
+       vintana2: regulator-vintana2 {
+               compatible = "ti,twl4030-vintana2";
+       };
+
+       vintdig: regulator-vintdig {
+               compatible = "ti,twl4030-vintdig";
+       };
+
+       vmmc1: regulator-vmmc1 {
+               compatible = "ti,twl4030-vmmc1";
+               regulator-min-microvolt = <1850000>;
+               regulator-max-microvolt = <3150000>;
+       };
+
+       vmmc2: regulator-vmmc2 {
+               compatible = "ti,twl4030-vmmc2";
+               regulator-min-microvolt = <1850000>;
+               regulator-max-microvolt = <3150000>;
+       };
+
+       vusb1v5: regulator-vusb1v5 {
+               compatible = "ti,twl4030-vusb1v5";
+       };
+
+       vusb1v8: regulator-vusb1v8 {
+               compatible = "ti,twl4030-vusb1v8";
+       };
+
+       vusb3v1: regulator-vusb3v1 {
+               compatible = "ti,twl4030-vusb3v1";
+       };
+
+       vpll1: regulator-vpll1 {
+               compatible = "ti,twl4030-vpll1";
+       };
+
+       vpll2: regulator-vpll2 {
+               compatible = "ti,twl4030-vpll2";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
+
+       vsim: regulator-vsim {
+               compatible = "ti,twl4030-vsim";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3000000>;
+       };
+
+       twl_gpio: gpio {
+               compatible = "ti,twl4030-gpio";
+               gpio-controller;
+               #gpio-cells = <2>;
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       usb2_phy: twl4030-usb {
+               compatible = "ti,twl4030-usb";
+               interrupts = <10>, <4>;
+               usb1v5-supply = <&vusb1v5>;
+               usb1v8-supply = <&vusb1v8>;
+               usb3v1-supply = <&vusb3v1>;
+               usb_mode = <1>;
+               #phy-cells = <0>;
+       };
+
+       twl_pwm: pwm {
+               compatible = "ti,twl4030-pwm";
+               #pwm-cells = <2>;
+       };
+
+       twl_pwmled: pwmled {
+               compatible = "ti,twl4030-pwmled";
+               #pwm-cells = <2>;
+       };
+
+       twl_pwrbutton: pwrbutton {
+               compatible = "ti,twl4030-pwrbutton";
+               interrupts = <8>;
+       };
+
+       twl_keypad: keypad {
+               compatible = "ti,twl4030-keypad";
+               interrupts = <1>;
+               keypad,num-rows = <8>;
+               keypad,num-columns = <8>;
+       };
+
+       twl_madc: madc {
+               compatible = "ti,twl4030-madc";
+               interrupts = <3>;
+               #io-channel-cells = <1>;
+       };
+};
diff --git a/roms/u-boot/arch/arm/dts/twl4030_omap3.dtsi b/roms/u-boot/arch/arm/dts/twl4030_omap3.dtsi
new file mode 100644
index 000000000..f9aaa53e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/twl4030_omap3.dtsi
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2013 Linaro, Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
+};
+
+&omap3_pmx_core {
+       /*
+        * On most OMAP3 platforms, the twl4030 IRQ line is connected
+        * to the SYS_NIRQ line on OMAP.  Therefore, configure the
+        * defaults for the SYS_NIRQ pin here.
+        */
+       twl4030_pins: pinmux_twl4030_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+               >;
+       };
+};
+
+/*
+ * If your board is not using the I2C4 pins with twl4030, then don't include
+ * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
+ * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
+ * sys_nvmode2 signaling.
+ */
+&omap3_pmx_wkup {
+       twl4030_vpins: pinmux_twl4030_vpins {
+               pinctrl-single,pins = <
+                       OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0)         /* i2c4_scl.i2c4_scl */
+                       OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0)         /* i2c4_sda.i2c4_sda */
+                       OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0)        /* sys_clkreq.sys_clkreq */
+                       OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0)        /* sys_off_mode.sys_off_mode */
+               >;
+       };
+};
diff --git a/roms/u-boot/arch/arm/dts/twl6030.dtsi b/roms/u-boot/arch/arm/dts/twl6030.dtsi
new file mode 100644
index 000000000..9d588cfaa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/twl6030.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+	compatible = "ti,twl6030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vaux1: regulator-vaux1 {
+		compatible = "ti,twl6030-vaux1";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl6030-vaux2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	vaux3: regulator-vaux3 {
+		compatible = "ti,twl6030-vaux3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vmmc: regulator-vmmc {
+		compatible = "ti,twl6030-vmmc";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vpp: regulator-vpp {
+		compatible = "ti,twl6030-vpp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	vusim: regulator-vusim {
+		compatible = "ti,twl6030-vusim";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	vdac: regulator-vdac {
+		compatible = "ti,twl6030-vdac";
+	};
+
+	vana: regulator-vana {
+		compatible = "ti,twl6030-vana";
+	};
+
+	vcxio: regulator-vcxio {
+		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
+	};
+
+	vusb: regulator-vusb {
+		compatible = "ti,twl6030-vusb";
+	};
+
+	v1v8: regulator-v1v8 {
+		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
+	};
+
+	v2v1: regulator-v2v1 {
+		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
+	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
+
+	twl_pwm: pwm {
+		/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+		compatible = "ti,twl6030-pwm";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwmled: pwmled {
+		/* provides one PWM (id 0 for Charging indicator LED) */
+		compatible = "ti,twl6030-pwmled";
+		#pwm-cells = <2>;
+	};
+
+	gpadc {
+		compatible = "ti,twl6030-gpadc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/twl6030_omap4.dtsi b/roms/u-boot/arch/arm/dts/twl6030_omap4.dtsi
new file mode 100644
index 000000000..fc498d0bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/twl6030_omap4.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&twl {
+	/*
+	 * On most OMAP4 platforms, the twl6030 IRQ line is connected
+	 * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
+	 * connected to the fref_clk0_out.sys_drm_msecure line.
+	 * Therefore, configure the defaults for the SYS_NIRQ1 and
+	 * fref_clk0_out.sys_drm_msecure pins here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&twl6030_pins
+		&twl6030_wkup_pins
+	>;
+};
+
+&omap4_pmx_wkup {
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+		>;
+	};
+};
+
+&omap4_pmx_core {
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/ulcb.dtsi b/roms/u-boot/arch/arm/dts/ulcb.dtsi
new file mode 100644
index 000000000..ff88af8e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/ulcb.dtsi
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car Gen3 ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/*
+ * SSI-AK4613
+ *	aplay   -D plughw:0,0 xxx.wav
+ *	arecord -D plughw:0,0 xxx.wav
+ * SSI-HDMI
+ *	aplay   -D plughw:0,1 xxx.wav
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas R-Car Gen3 ULCB board";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+			};
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+
+		dais = <&rsnd_port0	/* ak4613 */
+			&rsnd_port1	/* HDMI0  */
+			>;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	x23_clk: x23-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_for_hdmi>;
+			};
+		};
+	};
+};
+
+&hdmi0_con {
+	remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+
+		port {
+			ak4613_endpoint: endpoint {
+				remote-endpoint = <&rsnd_for_ak4613>;
+			};
+		};
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5925";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0xf>;
+		rohm,rstbmode-pulse;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_for_ak4613: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+
+				dai-format = "left_j";
+				bitclock-master = <&rsnd_for_ak4613>;
+				frame-master = <&rsnd_for_ak4613>;
+
+				playback = <&ssi0 &src0 &dvc0>;
+				capture  = <&ssi1 &src1 &dvc1>;
+			};
+		};
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_for_hdmi: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_for_hdmi>;
+				frame-master = <&rsnd_for_hdmi>;
+
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld11-global.dts b/roms/u-boot/arch/arm/dts/uniphier-ld11-global.dts
new file mode 100644
index 000000000..644ffb970
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld11-global.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 Global Board
+//
+// Copyright (C) 2016-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+//           Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include "uniphier-ld11.dtsi"
+
+/ {
+	model = "UniPhier LD11 Global Board (REF_LD11_GP)";
+	compatible = "socionext,uniphier-ld11-global",
+		     "socionext,uniphier-ld11";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	dvdd_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "DVDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp_vcc_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "AMP_VCC";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier LD11";
+		widgets = "Headphone", "Headphones";
+		dais = <&i2s_port2
+			&i2s_port3
+			&i2s_port4
+			&spdif_port0
+			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2s_hpcmout1 {
+	dai-format = "i2s";
+	remote-endpoint = <&tas_speaker>;
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tas5707a@1d {
+		compatible = "ti,tas5711";
+		reg = <0x1d>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>;
+		pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&dvdd_reg>;
+		DVDD-supply = <&dvdd_reg>;
+		PVDD_A-supply = <&amp_vcc_reg>;
+		PVDD_B-supply = <&amp_vcc_reg>;
+		PVDD_C-supply = <&amp_vcc_reg>;
+		PVDD_D-supply = <&amp_vcc_reg>;
+
+		port@0 {
+			tas_speaker: endpoint {
+				dai-format = "i2s";
+				remote-endpoint = <&i2s_hpcmout1>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld11-ref.dts b/roms/u-boot/arch/arm/dts/uniphier-ld11-ref.dts
new file mode 100644
index 000000000..617d2b1e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld11-ref.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 Reference Board
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld11.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD11 Reference Board";
+	compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 8>;
+};
+
+&serialsc {
+	interrupts = <0 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&gpio {
+	xirq0 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld11.dtsi b/roms/u-boot/arch/arm/dts/uniphier-ld11.dtsi
new file mode 100644
index 000000000..104d56d62
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld11.dtsi
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 SoC
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
+/ {
+	compatible = "socionext,uniphier-ld11";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+	};
+
+	cluster0_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-245000000 {
+			opp-hz = /bits/ 64 <245000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-490000000 {
+			opp-hz = /bits/ 64 <490000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-653334000 {
+			opp-hz = /bits/ 64 <653334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-980000000 {
+			opp-hz = /bits/ 64 <980000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 43 0 0>,
+				      <&pinctrl 51 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>,
+				      <&pinctrl 184 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2",
+						  "gpio_range3",
+						  "gpio_range4",
+						  "gpio_range5";
+			ngpios = <200>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-ld11-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <0 144 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aout1>,
+				    <&pinctrl_aoutiec1>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_pcmin2: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_line: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_line>;
+				};
+			};
+
+			i2s_port3: port@3 {
+				i2s_hpcmout1: endpoint {
+				};
+			};
+
+			i2s_port4: port@4 {
+				i2s_hp: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_hp>;
+				};
+			};
+
+			spdif_port0: port@5 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			src_port0: port@6 {
+				i2s_epcmout2: endpoint {
+				};
+			};
+
+			src_port1: port@7 {
+				i2s_epcmout3: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@8 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+		};
+
+		codec@57900000 {
+			compatible = "socionext,uniphier-evea";
+			reg = <0x57900000 0x1000>;
+			clock-names = "evea", "exiv";
+			clocks = <&sys_clk 41>, <&sys_clk 42>;
+			reset-names = "evea", "exiv", "adamv";
+			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
+			#sound-dai-cells = <1>;
+
+			port@0 {
+				evea_line: endpoint {
+					remote-endpoint = <&i2s_line>;
+				};
+			};
+
+			port@1 {
+				evea_hp: endpoint {
+					remote-endpoint = <&i2s_hp>;
+				};
+			};
+		};
+
+		adamv@57920000 {
+			compatible = "socionext,uniphier-ld11-adamv",
+				     "simple-mfd", "syscon";
+			reg = <0x57920000 0x1000>;
+
+			adamv_rst: reset {
+				compatible = "socionext,uniphier-ld11-adamv-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-ld11-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-ld11-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld11-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld11-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld11-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 243 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
+			has-transaction-translator;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 244 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
+			has-transaction-translator;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 245 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+				 <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+			phy-names = "usb";
+			phys = <&usb_phy2>;
+			has-transaction-translator;
+		};
+
+		mioctrl@5b3e0000 {
+			compatible = "socionext,uniphier-ld11-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x5b3e0000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld11-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld11-mio-reset";
+				#reset-cells = <1>;
+				resets = <&sys_rst 7>;
+			};
+		};
+
+		soc_glue: soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld11-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld11-pinctrl";
+			};
+
+			usb-phy {
+				compatible = "socionext,uniphier-ld11-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-ld11-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-ld11-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe40000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld11-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld11-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld11-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-ld11-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <0 66 4>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "internal";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
+
+&pinctrl_aoutiec1 {
+	drive-strength = <4>;	/* default: 4mA */
+
+	ao1arc {
+		pins = "AO1ARC";
+		drive-strength = <8>;	/* 8mA */
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld20-global.dts b/roms/u-boot/arch/arm/dts/uniphier-ld20-global.dts
new file mode 100644
index 000000000..a01579cb3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld20-global.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 Global Board
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+//           Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include "uniphier-ld20.dtsi"
+
+/ {
+	model = "UniPhier LD20 Global Board (REF_LD20_GP)";
+	compatible = "socionext,uniphier-ld20-global",
+		     "socionext,uniphier-ld20";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	dvdd_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "DVDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp_vcc_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "AMP_VCC";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier LD20";
+		widgets = "Headphone", "Headphones";
+		dais = <&i2s_port2
+			&i2s_port3
+			&i2s_port4
+			&spdif_port0
+			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2s_hpcmout1 {
+	dai-format = "i2s";
+	remote-endpoint = <&tas_speaker>;
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tas5707@1b {
+		compatible = "ti,tas5711";
+		reg = <0x1b>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>;
+		pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&dvdd_reg>;
+		DVDD-supply = <&dvdd_reg>;
+		PVDD_A-supply = <&amp_vcc_reg>;
+		PVDD_B-supply = <&amp_vcc_reg>;
+		PVDD_C-supply = <&amp_vcc_reg>;
+		PVDD_D-supply = <&amp_vcc_reg>;
+
+		port@0 {
+			tas_speaker: endpoint {
+				dai-format = "i2s";
+				remote-endpoint = <&i2s_hpcmout1>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_ether_rmii>;
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld20-ref.dts b/roms/u-boot/arch/arm/dts/uniphier-ld20-ref.dts
new file mode 100644
index 000000000..39ee279a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld20-ref.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld20.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD20 Reference Board";
+	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 8>;
+};
+
+&serialsc {
+	interrupts = <0 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&gpio {
+	xirq0 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl_ether_rgmii {
+	tx {
+		pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+		       "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+		drive-strength = <9>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld20.dtsi b/roms/u-boot/arch/arm/dts/uniphier-ld20.dtsi
new file mode 100644
index 000000000..5e7143ed0
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld20.dtsi
@@ -0,0 +1,999 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-ld20";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x100>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x101>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	cluster0_opp: opp-table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	cluster1_opp: opp-table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		spi2: spi@54006200 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 229 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2>;
+			clocks = <&peri_clk 13>;
+			resets = <&peri_rst 13>;
+		};
+
+		spi3: spi@54006300 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006300 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 230 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3>;
+			clocks = <&peri_clk 14>;
+			resets = <&peri_rst 14>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <205>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-ld20-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <0 144 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aout1>,
+				    <&pinctrl_aoutiec1>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_pcmin2: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_line: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_line>;
+				};
+			};
+
+			i2s_port3: port@3 {
+				i2s_hpcmout1: endpoint {
+				};
+			};
+
+			i2s_port4: port@4 {
+				i2s_hp: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_hp>;
+				};
+			};
+
+			spdif_port0: port@5 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			src_port0: port@6 {
+				i2s_epcmout2: endpoint {
+				};
+			};
+
+			src_port1: port@7 {
+				i2s_epcmout3: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@8 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+		};
+
+		codec@57900000 {
+			compatible = "socionext,uniphier-evea";
+			reg = <0x57900000 0x1000>;
+			clock-names = "evea", "exiv";
+			clocks = <&sys_clk 41>, <&sys_clk 42>;
+			reset-names = "evea", "exiv", "adamv";
+			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
+			#sound-dai-cells = <1>;
+
+			port@0 {
+				evea_line: endpoint {
+					remote-endpoint = <&i2s_line>;
+				};
+			};
+
+			port@1 {
+				evea_hp: endpoint {
+					remote-endpoint = <&i2s_hp>;
+				};
+			};
+		};
+
+		adamv@57920000 {
+			compatible = "socionext,uniphier-ld20-adamv",
+				     "simple-mfd", "syscon";
+			reg = <0x57920000 0x1000>;
+
+			adamv_rst: reset {
+				compatible = "socionext,uniphier-ld20-adamv-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-ld20-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-ld20-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-ld20-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld20-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld20-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld20-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+		};
+
+		soc_glue: soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld20-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld20-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-ld20-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* USB cells */
+				usb_rterm0: trim@54,4 {
+					reg = <0x54 1>;
+					bits = <4 2>;
+				};
+				usb_rterm1: trim@55,4 {
+					reg = <0x55 1>;
+					bits = <4 2>;
+				};
+				usb_rterm2: trim@58,4 {
+					reg = <0x58 1>;
+					bits = <4 2>;
+				};
+				usb_rterm3: trim@59,4 {
+					reg = <0x59 1>;
+					bits = <4 2>;
+				};
+				usb_sel_t0: trim@54,0 {
+					reg = <0x54 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t1: trim@55,0 {
+					reg = <0x55 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t2: trim@58,0 {
+					reg = <0x58 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t3: trim@59,0 {
+					reg = <0x59 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i0: trim@56,0 {
+					reg = <0x56 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i2: trim@5a,0 {
+					reg = <0x5a 1>;
+					bits = <0 4>;
+				};
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-ld20-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld20-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld20-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld20-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+
+			pvtctl: pvtctl {
+				compatible = "socionext,uniphier-ld20-thermal";
+				interrupts = <0 3 4>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-ld20-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <0 66 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		_usb: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 134 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+				    <&pinctrl_usb2>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb_rst 15>;
+			phys = <&usb_hsphy0>, <&usb_hsphy1>,
+			       <&usb_hsphy2>, <&usb_hsphy3>,
+			       <&usb_ssphy0>, <&usb_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-ld20-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb_rst: reset@0 {
+				compatible = "socionext,uniphier-ld20-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus2: regulator@120 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x120 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus3: regulator@130 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x130 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+					      <&usb_hs_i0>;
+			};
+
+			usb_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+					      <&usb_hs_i0>;
+			};
+
+			usb_hsphy2: hs-phy@220 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x220 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb_vbus2>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+					      <&usb_hs_i2>;
+			};
+
+			usb_hsphy3: hs-phy@230 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x230 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb_vbus3>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+					      <&usb_hs_i2>;
+			};
+
+			usb_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-ld20-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb_vbus0>;
+			};
+
+			usb_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-ld20-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 19>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 19>;
+				vbus-supply = <&usb_vbus1>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
+		usb: usb@65b00000 {
+			compatible = "socionext,uniphier-ld20-dwc3";
+			reg = <0x65b00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+				    <&pinctrl_usb2>, <&pinctrl_usb3>;
+			dwc3@65a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x65a00000 0x10000>;
+				interrupts = <0 134 4>;
+				dr_mode = "host";
+				tx-fifo-resize;
+			};
+		};
+
+		pcie: pcie@66000000 {
+			compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
+			status = "disabled";
+			reg-names = "dbi", "link", "config";
+			reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
+			      <0x2fff0000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			clocks = <&sys_clk 24>;
+			resets = <&sys_rst 24>;
+			num-lanes = <1>;
+			num-viewport = <1>;
+			bus-range = <0x0 0xff>;
+			device_type = "pci";
+			ranges =
+			/* downstream I/O */
+				<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
+			/* non-prefetchable memory */
+				<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
+			#interrupt-cells = <1>;
+			interrupt-names = "dma", "msi";
+			interrupts = <0 224 4>, <0 225 4>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,	/* INTA */
+					<0 0 0 2 &pcie_intc 1>,	/* INTB */
+					<0 0 0 3 &pcie_intc 2>,	/* INTC */
+					<0 0 0 4 &pcie_intc 3>;	/* INTD */
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 226 4>;
+			};
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-ld20-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "link";
+			clocks = <&sys_clk 24>;
+			reset-names = "link";
+			resets = <&sys_rst 24>;
+			socionext,syscon = <&soc_glue>;
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
+
+&pinctrl_aout1 {
+	drive-strength = <4>;	/* default: 3.5mA */
+
+	ao1dacck {
+		pins = "AO1DACCK";
+		drive-strength = <5>;	/* 5mA */
+	};
+};
+
+&pinctrl_aoutiec1 {
+	drive-strength = <4>;	/* default: 3.5mA */
+
+	ao1arc {
+		pins = "AO1ARC";
+		drive-strength = <11>;	/* 11mA */
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld4-ref.dts b/roms/u-boot/arch/arm/dts/uniphier-ld4-ref.dts
new file mode 100644
index 000000000..03fe69666
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld4-ref.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD4 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld4.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD4 Reference Board";
+	compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <1 8>;
+};
+
+&serialsc {
+	interrupts = <1 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio {
+	xirq1 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(1) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld4.dtsi b/roms/u-boot/arch/arm/dts/uniphier-ld4.dtsi
new file mode 100644
index 000000000..897162d5f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld4.dtsi
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD4 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
+/ {
+	compatible = "socionext,uniphier-ld4";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>;
+			gpio-ranges-group-names = "gpio_range";
+			ngpios = <136>;
+			socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-ld4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		dmac: dma-controller@5a000000 {
+			compatible = "socionext,uniphier-mio-dmac";
+			reg = <0x5a000000 0x1000>;
+			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+				     <0 71 4>, <0 72 4>, <0 73 4>;
+			clocks = <&mio_clk 7>;
+			resets = <&mio_rst 7>;
+			#dma-cells = <1>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 4>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: mmc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			has-transaction-translator;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			has-transaction-translator;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+				 <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+			has-transaction-translator;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld4-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-ld4-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@130 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x130 0x8>;
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		aidet: interrupt-controller@61830000 {
+			compatible = "socionext,uniphier-ld4-aidet";
+			reg = <0x61830000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld4-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand2cs>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld6b-ref.dts b/roms/u-boot/arch/arm/dts/uniphier-ld6b-ref.dts
new file mode 100644
index 000000000..08943aa37
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld6b-ref.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD6b Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld6b.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD6b Reference Board";
+	compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serialsc;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <4 8>;
+};
+
+&serialsc {
+	interrupts = <4 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&gpio {
+	xirq4 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ld6b.dtsi b/roms/u-boot/arch/arm/dts/uniphier-ld6b.dtsi
new file mode 100644
index 000000000..4d07a94c6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ld6b.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD6b SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/*
+ * LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the PXs2 die.
+ * Reuse the PXs2 device tree with some properties overridden.
+ */
+#include "uniphier-pxs2.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-ld6b";
+};
+
+/* UART3 unavailable: the pads are not wired to the package balls */
+&serial3 {
+	status = "disabled";
+};
+
+/*
+ * LD6b and PXs2 have completely different packages,
+ * which makes the pinctrl driver unshareable.
+ */
+&pinctrl {
+	compatible = "socionext,uniphier-ld6b-pinctrl";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pinctrl.dtsi b/roms/u-boot/arch/arm/dts/uniphier-pinctrl.dtsi
new file mode 100644
index 000000000..c0fd029b3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pinctrl.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier SoCs default pinctrl settings
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+&pinctrl {
+	pinctrl_aout: aout {
+		groups = "aout";
+		function = "aout";
+	};
+
+	pinctrl_ain1: ain1 {
+		groups = "ain1";
+		function = "ain1";
+	};
+
+	pinctrl_ain2: ain2 {
+		groups = "ain2";
+		function = "ain2";
+	};
+
+	pinctrl_ainiec1: ainiec1 {
+		groups = "ainiec1";
+		function = "ainiec1";
+	};
+
+	pinctrl_aout1: aout1 {
+		groups = "aout1";
+		function = "aout1";
+	};
+
+	pinctrl_aout2: aout2 {
+		groups = "aout2";
+		function = "aout2";
+	};
+
+	pinctrl_aout3: aout3 {
+		groups = "aout3";
+		function = "aout3";
+	};
+
+	pinctrl_aoutiec1: aoutiec1 {
+		groups = "aoutiec1";
+		function = "aoutiec1";
+	};
+
+	pinctrl_aoutiec2: aoutiec2 {
+		groups = "aoutiec2";
+		function = "aoutiec2";
+	};
+
+	pinctrl_emmc: emmc {
+		groups = "emmc", "emmc_dat8";
+		function = "emmc";
+	};
+
+	pinctrl_ether_mii: ether-mii {
+		groups = "ether_mii";
+		function = "ether_mii";
+	};
+
+	pinctrl_ether_rgmii: ether-rgmii {
+		groups = "ether_rgmii";
+		function = "ether_rgmii";
+	};
+
+	pinctrl_ether_rmii: ether-rmii {
+		groups = "ether_rmii";
+		function = "ether_rmii";
+	};
+
+	pinctrl_ether1_rgmii: ether1-rgmii {
+		groups = "ether1_rgmii";
+		function = "ether1_rgmii";
+	};
+
+	pinctrl_ether1_rmii: ether1-rmii {
+		groups = "ether1_rmii";
+		function = "ether1_rmii";
+	};
+
+	pinctrl_i2c0: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	pinctrl_i2c1: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	pinctrl_i2c2: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	pinctrl_i2c3: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	pinctrl_i2c4: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	pinctrl_i2c5: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	pinctrl_i2c6: i2c6 {
+		groups = "i2c6";
+		function = "i2c6";
+	};
+
+	pinctrl_nand: nand {
+		groups = "nand";
+		function = "nand";
+	};
+
+	pinctrl_nand2cs: nand2cs {
+		groups = "nand", "nand_cs1";
+		function = "nand";
+	};
+
+	pinctrl_pcie: pcie {
+		groups = "pcie";
+		function = "pcie";
+	};
+
+	pinctrl_sd: sd {
+		groups = "sd";
+		function = "sd";
+	};
+
+	pinctrl_sd_uhs: sd-uhs {
+		groups = "sd";
+		function = "sd";
+	};
+
+	pinctrl_sd1: sd1 {
+		groups = "sd1";
+		function = "sd1";
+	};
+
+	pinctrl_spi0: spi0 {
+		groups = "spi0";
+		function = "spi0";
+	};
+
+	pinctrl_spi1: spi1 {
+		groups = "spi1";
+		function = "spi1";
+	};
+
+	pinctrl_spi2: spi2 {
+		groups = "spi2";
+		function = "spi2";
+	};
+
+	pinctrl_spi3: spi3 {
+		groups = "spi3";
+		function = "spi3";
+	};
+
+	pinctrl_system_bus: system-bus {
+		groups = "system_bus", "system_bus_cs1";
+		function = "system_bus";
+	};
+
+	pinctrl_uart0: uart0 {
+		groups = "uart0";
+		function = "uart0";
+	};
+
+	pinctrl_uart1: uart1 {
+		groups = "uart1";
+		function = "uart1";
+	};
+
+	pinctrl_uart2: uart2 {
+		groups = "uart2";
+		function = "uart2";
+	};
+
+	pinctrl_uart3: uart3 {
+		groups = "uart3";
+		function = "uart3";
+	};
+
+	pinctrl_usb0: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	pinctrl_usb1: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	pinctrl_usb2: usb2 {
+		groups = "usb2";
+		function = "usb2";
+	};
+
+	pinctrl_usb3: usb3 {
+		groups = "usb3";
+		function = "usb3";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pro4-ace.dts b/roms/u-boot/arch/arm/dts/uniphier-pro4-ace.dts
new file mode 100644
index 000000000..27ff2b7b9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pro4-ace.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 Ace Board
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pro4.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Ace Board";
+	compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pro4-ref.dts b/roms/u-boot/arch/arm/dts/uniphier-pro4-ref.dts
new file mode 100644
index 000000000..3e1bc1275
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pro4-ref.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pro4.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Reference Board";
+	compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serialsc;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		usb0 = &usb0;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <2 8>;
+};
+
+&serialsc {
+	interrupts = <2 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&gpio {
+	xirq2 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(2) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pro4-sanji.dts b/roms/u-boot/arch/arm/dts/uniphier-pro4-sanji.dts
new file mode 100644
index 000000000..e7c122de2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pro4-sanji.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 Sanji Board
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pro4.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Sanji Board";
+	compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pro4.dtsi b/roms/u-boot/arch/arm/dts/uniphier-pro4.dtsi
new file mode 100644
index 000000000..9dae4e9b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pro4.dtsi
@@ -0,0 +1,655 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
+/ {
+	compatible = "socionext,uniphier-pro4";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(768 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>;
+			gpio-ranges-group-names = "gpio_range";
+			ngpios = <248>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-pro4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-pro4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-pro4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pro4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pro4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pro4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		dmac: dma-controller@5a000000 {
+			compatible = "socionext,uniphier-mio-dmac";
+			reg = <0x5a000000 0x1000>;
+			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+				     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+			clocks = <&mio_clk 7>;
+			resets = <&mio_rst 7>;
+			#dma-cells = <1>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 4>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: mmc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 5>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd1: mmc@5a600000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a600000 0x200>;
+			interrupts = <0 85 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clocks = <&mio_clk 2>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 2>, <&mio_rst 5>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 6>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+		};
+
+		usb2: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
+			has-transaction-translator;
+		};
+
+		usb3: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
+			has-transaction-translator;
+		};
+
+		soc_glue: soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pro4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro4-pinctrl";
+			};
+
+			usb-phy {
+				compatible = "socionext,uniphier-pro4-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb0_vbus>;
+				};
+
+				usb_phy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb1_vbus>;
+				};
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-pro4-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@130 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x130 0x8>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x14>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pro4-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pro4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pro4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pro4-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-pro4-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <0 66 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "gio", "ether", "ether-gb", "ether-phy";
+			clocks = <&sys_clk 12>, <&sys_clk 6>, <&sys_clk 7>,
+				 <&sys_clk 10>;
+			reset-names = "gio", "ether";
+			resets = <&sys_rst 12>, <&sys_rst 6>;
+			phy-mode = "rgmii";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		_usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 4>;
+			phys = <&usb_phy2>, <&usb0_ssphy>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x100>;
+
+			usb0_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_ssphy: ss-phy@10 {
+				compatible = "socionext,uniphier-pro4-usb3-ssphy";
+				reg = <0x10 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus>;
+			};
+
+			usb0_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
+		usb0: usb@65b00000 {
+			compatible = "socionext,uniphier-pro4-dwc3";
+			status = "disabled";
+			reg = <0x65b00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			dwc3@65a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x65a00000 0x10000>;
+				interrupts = <0 134 4>;
+				dr_mode = "host";
+				tx-fifo-resize;
+			};
+		};
+
+		_usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 4>;
+			phys = <&usb_phy3>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x100>;
+
+			usb1_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
+		usb1: usb@65d00000 {
+			compatible = "socionext,uniphier-pro4-dwc3";
+			status = "disabled";
+			reg = <0x65d00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			dwc3@65c00000 {
+				compatible = "snps,dwc3";
+				reg = <0x65c00000 0x10000>;
+				interrupts = <0 137 4>;
+				dr_mode = "host";
+				tx-fifo-resize;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pro5-4kbox.dts b/roms/u-boot/arch/arm/dts/uniphier-pro5-4kbox.dts
new file mode 100644
index 000000000..b57acc90c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pro5-4kbox.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for UniPhier Pro5 4KBOX Board (EVB-Pro5-4KBOX-M-V0)
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+
+/ {
+	model = "UniPhier Pro5 4KBOX Board";
+	compatible = "socionext,uniphier-pro5-4kbox", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	aliases {
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pro5.dtsi b/roms/u-boot/arch/arm/dts/uniphier-pro5.dtsi
new file mode 100644
index 000000000..19848e36f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pro5.dtsi
@@ -0,0 +1,696 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro5 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/ {
+	compatible = "socionext,uniphier-pro5";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+	};
+
+	cpu_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-116667000 {
+			opp-hz = /bits/ 64 <116667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-175000000 {
+			opp-hz = /bits/ 64 <175000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-233334000 {
+			opp-hz = /bits/ 64 <233334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-350000000 {
+			opp-hz = /bits/ 64 <350000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-466667000 {
+			opp-hz = /bits/ 64 <466667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-933334000 {
+			opp-hz = /bits/ 64 <933334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 190 4>, <0 191 4>;
+			cache-unified;
+			cache-size = <(2 * 1024 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+			next-level-cache = <&l3>;
+		};
+
+		l3: cache-controller@500c8000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
+			      <0x506c8000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(2 * 1024 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <256>;
+			cache-level = <3>;
+		};
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;	/* common with spi0 */
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>;
+			gpio-ranges-group-names = "gpio_range";
+			ngpios = <248>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pro5-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pro5-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pro5-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pro5-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pro5-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pro5-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pro5-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro5-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-pro5-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@130 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x130 0x8>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x28>;
+			};
+
+			efuse@300 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x300 0x14>;
+			};
+
+			efuse@400 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x400 0x8>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pro5-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pro5-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pro5-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pro5-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 134 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro5-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pro5-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@280 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x280 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy0: ss-phy@380 {
+				compatible = "socionext,uniphier-pro5-usb3-ssphy";
+				reg = <0x380 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 137 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro5-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pro5-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@280 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x280 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@290 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x290 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@380 {
+				compatible = "socionext,uniphier-pro5-usb3-ssphy";
+				reg = <0x380 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		pcie_ep: pcie-ep@66000000 {
+			compatible = "socionext,uniphier-pro5-pcie-ep",
+				     "snps,dw-pcie-ep";
+			status = "disabled";
+			reg-names = "dbi", "dbi2", "link", "addr_space";
+			reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+			      <0x66010000 0x10000>, <0x67000000 0x400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pcie>;
+			clock-names = "gio", "link";
+			clocks = <&sys_clk 12>, <&sys_clk 24>;
+			reset-names = "gio", "link";
+			resets = <&sys_rst 12>, <&sys_rst 24>;
+			num-ib-windows = <16>;
+			num-ob-windows = <16>;
+			num-lanes = <4>;
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-pro5-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "gio", "link";
+			clocks = <&sys_clk 12>, <&sys_clk 24>;
+			reset-names = "gio", "link";
+			resets = <&sys_rst 12>, <&sys_rst 24>;
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand2cs>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+
+		emmc: mmc@68400000 {
+			compatible = "socionext,uniphier-sd-v3.1";
+			status = "disabled";
+			reg = <0x68400000 0x800>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sd_clk 1>;
+			reset-names = "host", "hw";
+			resets = <&sd_rst 1>, <&sd_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd: mmc@68800000 {
+			compatible = "socionext,uniphier-sd-v3.1";
+			status = "disabled";
+			reg = <0x68800000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pxs2-gentil.dts b/roms/u-boot/arch/arm/dts/uniphier-pxs2-gentil.dts
new file mode 100644
index 000000000..759384b60
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pxs2-gentil.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs2 Gentil Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs2.dtsi"
+
+/ {
+	model = "UniPhier PXs2 Gentil Board";
+	compatible = "socionext,uniphier-pxs2-gentil",
+		     "socionext,uniphier-pxs2";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial2;
+		serial1 = &serial0;
+		serial2 = &serial1;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier PXs2";
+		dais = <&i2s_port2>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2s_aux {
+	dai-format = "i2s";
+	remote-endpoint = <&wm_speaker>;
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			wm_speaker: endpoint {
+				dai-format = "i2s";
+				remote-endpoint = <&i2s_aux>;
+			};
+		};
+	};
+};
+
+&emmc {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pxs2-vodka.dts b/roms/u-boot/arch/arm/dts/uniphier-pxs2-vodka.dts
new file mode 100644
index 000000000..7e08a459f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pxs2-vodka.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs2 Vodka Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs2.dtsi"
+
+/ {
+	model = "UniPhier PXs2 Vodka Board";
+	compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial2;
+		serial1 = &serial0;
+		serial2 = &serial1;
+		i2c0 = &i2c0;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier PXs2";
+		dais = <&spdif_port0
+			&comp_spdif_port0>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pxs2.dtsi b/roms/u-boot/arch/arm/dts/uniphier-pxs2.dtsi
new file mode 100644
index 000000000..899ff379c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pxs2.dtsi
@@ -0,0 +1,830 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs2 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-pxs2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	cpu_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <95000>;	/* 95C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <85000>;	/* 85C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+			cache-unified;
+			cache-size = <(1280 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 96 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1";
+			ngpios = <232>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-pxs2-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <0 144 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ain1>,
+				    <&pinctrl_ain2>,
+				    <&pinctrl_ainiec1>,
+				    <&pinctrl_aout2>,
+				    <&pinctrl_aout3>,
+				    <&pinctrl_aoutiec1>,
+				    <&pinctrl_aoutiec2>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_line: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_aux: endpoint {
+				};
+			};
+
+			spdif_port0: port@3 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			spdif_port1: port@4 {
+				spdif_iecout1: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@5 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+
+			comp_spdif_port1: port@6 {
+				comp_spdif_iecout1: endpoint {
+				};
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for STM */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pxs2-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pxs2-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pxs2-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pxs2-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pxs2-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pxs2-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a000000 0x800>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sd_clk 1>;
+			reset-names = "host", "hw";
+			resets = <&sd_rst 1>, <&sd_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		soc_glue: soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pxs2-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs2-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-pxs2-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x58>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pxs2-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pxs2-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pxs2-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pxs2-reset";
+				#reset-cells = <1>;
+			};
+
+			pvtctl: pvtctl {
+				compatible = "socionext,uniphier-pxs2-thermal";
+				interrupts = <0 3 4>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f86 0x6844>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-pxs2-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <0 66 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		_usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+
+			usb0_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
+		usb0: usb@65b00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3";
+			status = "disabled";
+			reg = <0x65b00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			dwc3@65a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x65a00000 0x10000>;
+				interrupts = <0 134 4>;
+				dr_mode = "host";
+				tx-fifo-resize;
+			};
+		};
+
+		_usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 21>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
+		usb1: usb@65d00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3";
+			status = "disabled";
+			reg = <0x65d00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			dwc3@65c00000 {
+				compatible = "snps,dwc3";
+				reg = <0x65c00000 0x10000>;
+				interrupts = <0 137 4>;
+				dr_mode = "host";
+				tx-fifo-resize;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand2cs>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pxs3-ref.dts b/roms/u-boot/arch/arm/dts/uniphier-pxs3-ref.dts
new file mode 100644
index 000000000..1a80cd91d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pxs3-ref.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board
+//
+// Copyright (C) 2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PXs3 Reference Board";
+	compatible = "socionext,uniphier-pxs3-ref", "socionext,uniphier-pxs3";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c6 = &i2c6;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xa0000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <4 8>;
+};
+
+&serialsc {
+	interrupts = <4 8>;
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio {
+	xirq4 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-handle = <&ethphy0>;
+};
+
+&mdio0 {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	phy-handle = <&ethphy1>;
+};
+
+&mdio1 {
+	ethphy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
+
+&pinctrl_ether_rgmii {
+	tx {
+		pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1",
+		       "RGMII0_TXD2", "RGMII0_TXD3", "RGMII0_TXCTL";
+		drive-strength = <9>;
+	};
+};
+
+&pinctrl_ether1_rgmii {
+	tx {
+		pins = "RGMII1_TXCLK", "RGMII1_TXD0", "RGMII1_TXD1",
+		       "RGMII1_TXD2", "RGMII1_TXD3", "RGMII1_TXCTL";
+		drive-strength = <9>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-pxs3.dtsi b/roms/u-boot/arch/arm/dts/uniphier-pxs3.dtsi
new file mode 100644
index 000000000..c4344926d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-pxs3.dtsi
@@ -0,0 +1,897 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs3 SoC
+//
+// Copyright (C) 2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-pxs3";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x002>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x003>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	cluster0_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-325000000 {
+			opp-hz = /bits/ 64 <325000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-650000000 {
+			opp-hz = /bits/ 64 <650000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-866667000 {
+			opp-hz = /bits/ 64 <866667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 104 0 0>,
+				      <&pinctrl 168 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <286>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pxs3-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pxs3-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pxs3-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pxs3-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pxs3-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pxs3-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		soc_glue: soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pxs3-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs3-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-pxs3-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* USB cells */
+				usb_rterm0: trim@54,4 {
+					reg = <0x54 1>;
+					bits = <4 2>;
+				};
+				usb_rterm1: trim@55,4 {
+					reg = <0x55 1>;
+					bits = <4 2>;
+				};
+				usb_rterm2: trim@58,4 {
+					reg = <0x58 1>;
+					bits = <4 2>;
+				};
+				usb_rterm3: trim@59,4 {
+					reg = <0x59 1>;
+					bits = <4 2>;
+				};
+				usb_sel_t0: trim@54,0 {
+					reg = <0x54 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t1: trim@55,0 {
+					reg = <0x55 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t2: trim@58,0 {
+					reg = <0x58 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t3: trim@59,0 {
+					reg = <0x59 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i0: trim@56,0 {
+					reg = <0x56 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i2: trim@5a,0 {
+					reg = <0x5a 1>;
+					bits = <0 4>;
+				};
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pxs3-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pxs3-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pxs3-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pxs3-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+
+			pvtctl: pvtctl {
+				compatible = "socionext,uniphier-pxs3-thermal";
+				interrupts = <0 3 4>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
+		};
+
+		eth0: ethernet@65000000 {
+			compatible = "socionext,uniphier-pxs3-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <0 66 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		eth1: ethernet@65200000 {
+			compatible = "socionext,uniphier-pxs3-ave4";
+			status = "disabled";
+			reg = <0x65200000 0x8500>;
+			interrupts = <0 67 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether1_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 7>;
+			reset-names = "ether";
+			resets = <&sys_rst 7>;
+			phy-mode = "rgmii";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 1>;
+
+			mdio1: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		_usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs3-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+					      <&usb_hs_i0>;
+			};
+
+			usb0_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+					      <&usb_hs_i0>;
+			};
+
+			usb0_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
+		usb0: usb@65b00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3";
+			status = "disabled";
+			reg = <0x65b00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			dwc3@65a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x65a00000 0x10000>;
+				interrupts = <0 134 4>;
+				dr_mode = "host";
+				tx-fifo-resize;
+			};
+		};
+
+		_usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+			       <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs3-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 20>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+					      <&usb_hs_i2>;
+			};
+
+			usb1_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 20>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+					      <&usb_hs_i2>;
+			};
+
+			usb1_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 21>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
+		usb1: usb@65d00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3";
+			status = "disabled";
+			reg = <0x65d00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			dwc3@65c00000 {
+				compatible = "snps,dwc3";
+				reg = <0x65c00000 0x10000>;
+				interrupts = <0 137 4>;
+				dr_mode = "host";
+				tx-fifo-resize;
+			};
+		};
+
+		pcie: pcie@66000000 {
+			compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
+			status = "disabled";
+			reg-names = "dbi", "link", "config";
+			reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
+			      <0x2fff0000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			clocks = <&sys_clk 24>;
+			resets = <&sys_rst 24>;
+			num-lanes = <1>;
+			num-viewport = <1>;
+			bus-range = <0x0 0xff>;
+			device_type = "pci";
+			ranges =
+			/* downstream I/O */
+				<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
+			/* non-prefetchable memory */
+				<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
+			#interrupt-cells = <1>;
+			interrupt-names = "dma", "msi";
+			interrupts = <0 224 4>, <0 225 4>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,	/* INTA */
+					<0 0 0 2 &pcie_intc 1>,	/* INTB */
+					<0 0 0 3 &pcie_intc 2>,	/* INTC */
+					<0 0 0 4 &pcie_intc 3>;	/* INTD */
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 226 4>;
+			};
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-pxs3-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "link";
+			clocks = <&sys_clk 24>;
+			reset-names = "link";
+			resets = <&sys_rst 24>;
+			socionext,syscon = <&soc_glue>;
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/uniphier-ref-daughter.dtsi b/roms/u-boot/arch/arm/dts/uniphier-ref-daughter.dtsi
new file mode 100644
index 000000000..a11897669
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-ref-daughter.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Reference Daughter Board
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "microchip,24lc128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-sld8-ref.dts b/roms/u-boot/arch/arm/dts/uniphier-sld8-ref.dts
new file mode 100644
index 000000000..22898df39
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-sld8-ref.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier sLD8 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-sld8.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier sLD8 Reference Board";
+	compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 8>;
+};
+
+&serialsc {
+	interrupts = <0 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio {
+	xirq0 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-sld8.dtsi b/roms/u-boot/arch/arm/dts/uniphier-sld8.dtsi
new file mode 100644
index 000000000..93ddebbae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-sld8.dtsi
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier sLD8 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
+/ {
+	compatible = "socionext,uniphier-sld8";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(256 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 104 0 0>,
+				      <&pinctrl 112 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <136>;
+			socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-sld8-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-sld8-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-sld8-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-sld8-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-sld8-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-sld8-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		dmac: dma-controller@5a000000 {
+			compatible = "socionext,uniphier-mio-dmac";
+			reg = <0x5a000000 0x1000>;
+			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+				     <0 71 4>, <0 72 4>, <0 73 4>;
+			clocks = <&mio_clk 7>;
+			resets = <&mio_rst 7>;
+			#dma-cells = <1>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 4>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: mmc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			has-transaction-translator;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			has-transaction-translator;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+				 <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+			has-transaction-translator;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-sld8-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-sld8-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-sld8-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x14>;
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		aidet: interrupt-controller@61830000 {
+			compatible = "socionext,uniphier-sld8-aidet";
+			reg = <0x61830000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sld8-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-sld8-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-sld8-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand2cs>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/roms/u-boot/arch/arm/dts/uniphier-support-card.dtsi b/roms/u-boot/arch/arm/dts/uniphier-support-card.dtsi
new file mode 100644
index 000000000..444802fee
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-support-card.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Support Card (Expansion Board)
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+&system_bus {
+	status = "okay";
+	ranges = <1 0x00000000 0x42000000 0x02000000>;
+	interrupt-parent = <&gpio>;
+
+	ethsc: ethernet@1,1f00000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <1 0x01f00000 0x1000>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+	};
+
+	serialsc: serial@1,1fb0000 {
+		compatible = "ns16550a";
+		reg = <1 0x01fb0000 0x20>;
+		clock-frequency = <12288000>;
+		reg-shift = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/uniphier-v7-u-boot.dtsi b/roms/u-boot/arch/arm/dts/uniphier-v7-u-boot.dtsi
new file mode 100644
index 000000000..9459bf037
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/uniphier-v7-u-boot.dtsi
@@ -0,0 +1,45 @@
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+
+		serial@54006800 {
+			u-boot,dm-pre-reloc;
+		};
+
+		serial@54006900 {
+			u-boot,dm-pre-reloc;
+		};
+
+		serial@54006a00 {
+			u-boot,dm-pre-reloc;
+		};
+
+		soc-glue@5f800000 {
+			u-boot,dm-pre-reloc;
+
+			pinctrl {
+				u-boot,dm-pre-reloc;
+
+				emmc {
+					u-boot,dm-pre-reloc;
+				};
+
+				uart0 {
+					u-boot,dm-pre-reloc;
+				};
+
+				uart1 {
+					u-boot,dm-pre-reloc;
+				};
+
+				uart2 {
+					u-boot,dm-pre-reloc;
+				};
+			};
+		};
+	};
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/usb_a9263.dts b/roms/u-boot/arch/arm/dts/usb_a9263.dts
new file mode 100644
index 000000000..9adc12af3
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/usb_a9263.dts
@@ -0,0 +1,142 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Calao USB A9263";
+	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffa4000 {
+				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00a00000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/versal-mini-emmc0.dts b/roms/u-boot/arch/arm/dts/versal-mini-emmc0.dts
new file mode 100644
index 000000000..6a6e7467a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/versal-mini-emmc0.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal Mini eMMC0 Configuration
+ *
+ * (C) Copyright 2018-2019, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "xlnx,versal";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Xilinx Versal MINI eMMC0";
+
+	clk200: clk200 {
+		compatible = "fixed-clock";
+		#clock-cells = <0x0>;
+		clock-frequency = <200000000>;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "okay";
+		u-boot,dm-pre-reloc;
+	};
+
+	amba: amba {
+		u-boot,dm-pre-reloc;
+		compatible = "simple-bus";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		ranges;
+
+		sdhci0: sdhci@f1040000 {
+			compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+			status = "okay";
+			non-removable;
+			disable-wp;
+			bus-width = <8>;
+			reg = <0x0 0xf1040000 0x0 0x10000>;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clk200 &clk200>;
+			xlnx,device_id = <0>;
+			no-1-8-v;
+			xlnx,mio-bank = <0>;
+			#stream-id-cells = <1>;
+		};
+	};
+
+	aliases {
+		serial0 = &dcc;
+		mmc0 = &sdhci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/versal-mini-emmc1.dts b/roms/u-boot/arch/arm/dts/versal-mini-emmc1.dts
new file mode 100644
index 000000000..c342e6bdf
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/versal-mini-emmc1.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal Mini eMMC1 Configuration
+ *
+ * (C) Copyright 2018-2019, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "xlnx,versal";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Xilinx Versal MINI eMMC1";
+
+	clk200: clk200 {
+		compatible = "fixed-clock";
+		#clock-cells = <0x0>;
+		clock-frequency = <200000000>;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "okay";
+		u-boot,dm-pre-reloc;
+	};
+
+	amba: amba {
+		u-boot,dm-pre-reloc;
+		compatible = "simple-bus";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		ranges;
+
+		sdhci1: sdhci@f1050000 {
+			compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+			status = "okay";
+			non-removable;
+			disable-wp;
+			bus-width = <8>;
+			reg = <0x0 0xf1050000 0x0 0x10000>;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clk200 &clk200>;
+			xlnx,device_id = <1>;
+			no-1-8-v;
+			xlnx,mio-bank = <0>;
+			#stream-id-cells = <1>;
+		};
+	};
+
+	aliases {
+		serial0 = &dcc;
+		mmc0 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/versal-mini.dts b/roms/u-boot/arch/arm/dts/versal-mini.dts
new file mode 100644
index 000000000..6a83981cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/versal-mini.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal Mini Configuration
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Versal MINI";
+	compatible = "xlnx,versal";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &dcc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0xfffc0000 0x0 0x40000>, <0x0 0x0 0x0 0x80000000>;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "okay";
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/vf-colibri-u-boot.dtsi b/roms/u-boot/arch/arm/dts/vf-colibri-u-boot.dtsi
new file mode 100644
index 000000000..2294ee955
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf-colibri-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&aips0 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ddr {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&dcu0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/vf-colibri.dtsi b/roms/u-boot/arch/arm/dts/vf-colibri.dtsi
new file mode 100644
index 000000000..9de4b28e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf-colibri.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2014-2019 Toradex AG
+ */
+
+/dts-v1/;
+#include "vf.dtsi"
+#include "vf610-pinfunc.h"
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		usb0 = &ehci0; /* required for ums */
+		display1 = &dcu0;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN */
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
+
+	spi_cmd: sspi@0 {
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	fsl,cdet-gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&ehci1 {
+	dr_mode = "host";
+	status = "okay";
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+&esdhc1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+/* Ethernet */
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ddr>;
+
+	pinctrl_ddr: ddrgrp {
+		fsl,pins = <
+			VF610_PAD_DDR_A15__DDR_A_15             0x180
+			VF610_PAD_DDR_A14__DDR_A_14             0x180
+			VF610_PAD_DDR_A13__DDR_A_13             0x180
+			VF610_PAD_DDR_A12__DDR_A_12             0x180
+			VF610_PAD_DDR_A11__DDR_A_11             0x180
+			VF610_PAD_DDR_A10__DDR_A_10             0x180
+			VF610_PAD_DDR_A9__DDR_A_9               0x180
+			VF610_PAD_DDR_A8__DDR_A_8               0x180
+			VF610_PAD_DDR_A7__DDR_A_7               0x180
+			VF610_PAD_DDR_A6__DDR_A_6               0x180
+			VF610_PAD_DDR_A5__DDR_A_5               0x180
+			VF610_PAD_DDR_A4__DDR_A_4               0x180
+			VF610_PAD_DDR_A3__DDR_A_3               0x180
+			VF610_PAD_DDR_A2__DDR_A_2               0x180
+			VF610_PAD_DDR_A1__DDR_A_1               0x180
+			VF610_PAD_DDR_A0__DDR_A_0               0x180
+			VF610_PAD_DDR_BA2__DDR_BA_2             0x180
+			VF610_PAD_DDR_BA1__DDR_BA_1             0x180
+			VF610_PAD_DDR_BA0__DDR_BA_0             0x180
+			VF610_PAD_DDR_CAS__DDR_CAS_B            0x180
+			VF610_PAD_DDR_CKE__DDR_CKE_0            0x180
+			VF610_PAD_DDR_CLK__DDR_CLK_0            0x180
+			VF610_PAD_DDR_CS__DDR_CS_B_0            0x180
+			VF610_PAD_DDR_D15__DDR_D_15             0x10180
+			VF610_PAD_DDR_D14__DDR_D_14             0x10180
+			VF610_PAD_DDR_D13__DDR_D_13             0x10180
+			VF610_PAD_DDR_D12__DDR_D_12             0x10180
+			VF610_PAD_DDR_D11__DDR_D_11             0x10180
+			VF610_PAD_DDR_D10__DDR_D_10             0x10180
+			VF610_PAD_DDR_D9__DDR_D_9               0x10180
+			VF610_PAD_DDR_D8__DDR_D_8               0x10180
+			VF610_PAD_DDR_D7__DDR_D_7               0x10180
+			VF610_PAD_DDR_D6__DDR_D_6               0x10180
+			VF610_PAD_DDR_D5__DDR_D_5               0x10180
+			VF610_PAD_DDR_D4__DDR_D_4               0x10180
+			VF610_PAD_DDR_D3__DDR_D_3               0x10180
+			VF610_PAD_DDR_D2__DDR_D_2               0x10180
+			VF610_PAD_DDR_D1__DDR_D_1               0x10180
+			VF610_PAD_DDR_D0__DDR_D_0               0x10180
+			VF610_PAD_DDR_DQM1__DDR_DQM_1           0x10180
+			VF610_PAD_DDR_DQM0__DDR_DQM_0           0x10180
+			VF610_PAD_DDR_DQS1__DDR_DQS_1           0x10180
+			VF610_PAD_DDR_DQS0__DDR_DQS_0           0x10180
+			VF610_PAD_DDR_RAS__DDR_RAS_B            0x180
+			VF610_PAD_DDR_WE__DDR_WE_B              0x180
+			VF610_PAD_DDR_ODT1__DDR_ODT_0           0x180
+			VF610_PAD_DDR_ODT0__DDR_ODT_1           0x180
+			VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1    0x180
+			VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2    0x180
+			VF610_PAD_DDR_RESETB                    0x180
+		>;
+	};
+
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x33e2
+			VF610_PAD_PTD6__DSPI1_SIN		0x33e1
+			VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
+			VF610_PAD_PTD8__DSPI1_SCK		0x33e2
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+			VF610_PAD_PTB20__GPIO_42		0x219d
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKOUT		0x30df
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30df
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30df
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30df
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30df
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30df
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30df
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30df
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30df
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30df
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD23__NF_IO7			0x28df
+			VF610_PAD_PTD22__NF_IO6			0x28df
+			VF610_PAD_PTD21__NF_IO5			0x28df
+			VF610_PAD_PTD20__NF_IO4			0x28df
+			VF610_PAD_PTD19__NF_IO3			0x28df
+			VF610_PAD_PTD18__NF_IO2			0x28df
+			VF610_PAD_PTD17__NF_IO1			0x28df
+			VF610_PAD_PTD16__NF_IO0			0x28df
+			VF610_PAD_PTB24__NF_WE_B		0x28c2
+			VF610_PAD_PTB25__NF_CE0_B		0x28c2
+			VF610_PAD_PTB27__NF_RE_B		0x28c2
+			VF610_PAD_PTC26__NF_RB_B		0x283d
+			VF610_PAD_PTC27__NF_ALE			0x28c2
+			VF610_PAD_PTC28__NF_CLE			0x28c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x11af
+			VF610_PAD_PTB11__UART0_RX		0x11af
+			VF610_PAD_PTB12__UART0_RTS		0x11af
+			VF610_PAD_PTB13__UART0_CTS		0x11af
+		>;
+	};
+
+	pinctrl_usbh1_reg: gpio_usb_vbus {
+		fsl,pins = <
+			VF610_PAD_PTD4__GPIO_83			0x22ed
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&dcu0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/vf.dtsi b/roms/u-boot/arch/arm/dts/vf.dtsi
new file mode 100644
index 000000000..5f69d0fd6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		spi0 = &dspi0;
+		spi1 = &dspi1;
+		ehci0 = &ehci0;
+		ehci1 = &ehci1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aips0: aips-bus@40000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x00070000>;
+			ranges;
+
+			uart0: serial@40027000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40027000 0x1000>;
+				status = "disabled";
+			};
+
+			uart1: serial@40028000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40028000 0x1000>;
+				status = "disabled";
+			};
+
+			uart2: serial@40029000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40029000 0x1000>;
+				status = "disabled";
+			};
+
+			uart3: serial@4002a000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x4002a000 0x1000>;
+				status = "disabled";
+			};
+
+			dspi0: dspi0@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				num-cs = <5>;
+				status = "disabled";
+			};
+
+			dspi1: dspi1@4002d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002d000 0x1000>;
+				num-cs = <5>;
+				status = "disabled";
+			};
+
+			qspi0: quadspi@40044000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x40044000 0x1000>,
+					  <0x20000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				status = "disabled";
+			};
+
+			i2c0: i2c@40066000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40066000 0x1000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@40067000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40067000 0x1000>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@40048000 {
+				compatible = "fsl,vf610-iomuxc";
+				reg = <0x40048000 0x1000>;
+				fsl,mux_mask = <0x700000>;
+			};
+
+			gpio0: gpio@40049000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x400ff000 0x40>;
+				#gpio-cells = <2>;
+			};
+
+			gpio1: gpio@4004a000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x400ff040 0x40>;
+				#gpio-cells = <2>;
+			};
+
+			gpio2: gpio@4004b000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x400ff080 0x40>;
+				#gpio-cells = <2>;
+			};
+
+			gpio3: gpio@4004c000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x400ff0c0 0x40>;
+				#gpio-cells = <2>;
+			};
+
+			gpio4: gpio@4004d000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x400ff100 0x40>;
+				#gpio-cells = <2>;
+			};
+
+			dcu0: dcu@40058000 {
+				compatible = "fsl,vf610-dcu";
+				reg = <0x40058000 0x1200>;
+				status = "disabled";
+			};
+
+			ehci0: ehci@40034000 {
+				compatible = "fsl,vf610-usb";
+				reg = <0x40034000 0x800>;
+				status = "disabled";
+			};
+		};
+
+		aips1: aips-bus@40080000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40080000 0x0007f000>;
+			ranges;
+
+			uart4: serial@400a9000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400a9000 0x1000>;
+				status = "disabled";
+			};
+
+			uart5: serial@400aa000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400aa000 0x1000>;
+				status = "disabled";
+			};
+
+			ehci1: ehci@400b4000 {
+				compatible = "fsl,vf610-usb";
+				reg = <0x400b4000 0x800>;
+				status = "disabled";
+			};
+
+			esdhc1: esdhc@400b2000 {
+				compatible = "fsl,esdhc";
+				reg = <0x400b2000 0x1000>;
+				status = "disabled";
+			};
+
+			fec0: fec@400d0000 {
+			      compatible = "fsl,mvf600-fec";
+			      reg = <0x400d0000 0x1000>;
+			      status = "disabled";
+			};
+
+			fec1: fec@400d1000 {
+			      compatible = "fsl,mvf600-fec";
+			      reg = <0x400d1000 0x1000>;
+			      status = "disabled";
+			};
+
+			nfc: nand@400e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-nfc";
+				reg = <0x400e0000 0x4000>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@400e6000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e6000 0x1000>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@400e7000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e7000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/vf500-colibri.dts b/roms/u-boot/arch/arm/dts/vf500-colibri.dts
new file mode 100644
index 000000000..c83a16fdc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf500-colibri.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2014 Toradex AG
+ */
+
+/dts-v1/;
+#include "vf-colibri.dtsi"
+#include "vf-colibri-u-boot.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50";
+	compatible = "toradex,vf500-colibri_vf50", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
diff --git a/roms/u-boot/arch/arm/dts/vf610-bk4r1-u-boot.dtsi b/roms/u-boot/arch/arm/dts/vf610-bk4r1-u-boot.dtsi
new file mode 100644
index 000000000..088926bde
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf610-bk4r1-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&aips0 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ddr {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/roms/u-boot/arch/arm/dts/vf610-bk4r1.dts b/roms/u-boot/arch/arm/dts/vf610-bk4r1.dts
new file mode 100644
index 000000000..55cd53384
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf610-bk4r1.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de.
+ *
+ * Copyright 2016 Toradex AG
+ */
+
+/dts-v1/;
+#include "vf610-pcm052.dtsi"
+#include "vf610-pinfunc.h"
+
+/ {
+	model = "Liebherr (LVF) BK4 Vybrid Board";
+	compatible = "lvf,bk4", "fsl,vf610";
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		compatible = "gpio-leds";
+
+		/* PTE15 PORT3[24] H6 green */
+		led@0 {
+			label = "0";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		/* PTA12 PORT0[5] H5 green */
+		led@1 {
+			label = "1";
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		/* PTE20 PORT3[39] H4 green */
+		led@2 {
+			label = "2";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		/* PTE12 PORT3[21] H3 green */
+		led@3 {
+			label = "3";
+			gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		/* LED6 is now PRESET ETH -> PTA16 PORT0[6]  H6 red */
+		/* PTE9  PORT3[18] H5 red */
+		led@4 {
+			label = "5";
+			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		/* PTE23 PORT4[0]  H4 red */
+		led@5 {
+			label = "6";
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		/* PTE16 PORT3[25] H3 red */
+		led@6 {
+			label = "7";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_ddr &pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* ETH control pins */
+			VF610_PAD_PTE17__GPIO_122		0x1183
+			VF610_PAD_PTA16__GPIO_6	0x1183
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			/* LEDS */
+			VF610_PAD_PTE15__GPIO_120	0x1183
+			VF610_PAD_PTA12__GPIO_5	0x1183
+			VF610_PAD_PTE9__GPIO_114	0x1183
+			VF610_PAD_PTE20__GPIO_125	0x1183
+			VF610_PAD_PTE23__GPIO_128	0x1183
+			VF610_PAD_PTE16__GPIO_121	0x1183
+		>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/vf610-colibri.dts b/roms/u-boot/arch/arm/dts/vf610-colibri.dts
new file mode 100644
index 000000000..7275fec27
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf610-colibri.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2014 Toradex AG
+ */
+
+/dts-v1/;
+#include "vf-colibri.dtsi"
+#include "vf-colibri-u-boot.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61";
+	compatible = "toradex,vf610-colibri_vf61", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
diff --git a/roms/u-boot/arch/arm/dts/vf610-pcm052.dts b/roms/u-boot/arch/arm/dts/vf610-pcm052.dts
new file mode 100644
index 000000000..22026024e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf610-pcm052.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2016 Toradex AG
+ */
+
+/dts-v1/;
+#include "vf610-pcm052.dtsi"
+
+/ {
+	model = "Phytec phyCORE-Vybrid";
+	compatible = "phytec,pcm052", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+};
diff --git a/roms/u-boot/arch/arm/dts/vf610-pcm052.dtsi b/roms/u-boot/arch/arm/dts/vf610-pcm052.dtsi
new file mode 100644
index 000000000..1383d03c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf610-pcm052.dtsi
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de.
+ *
+ */
+
+/dts-v1/;
+#include "vf.dtsi"
+#include "vf610-pinfunc.h"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		spi0 = &qspi0;
+		mmc0 = &esdhc1;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eth>;
+
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eth1>;
+
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+		u-boot,i2c-offset-len = <2>;
+	};
+
+	m41t62: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ddr>;
+
+	pinctrl_ddr: ddrgrp {
+		fsl,pins = <
+			VF610_PAD_DDR_A15__DDR_A_15             0x1c0
+			VF610_PAD_DDR_A14__DDR_A_14             0x1c0
+			VF610_PAD_DDR_A13__DDR_A_13             0x1c0
+			VF610_PAD_DDR_A12__DDR_A_12             0x1c0
+			VF610_PAD_DDR_A11__DDR_A_11             0x1c0
+			VF610_PAD_DDR_A10__DDR_A_10             0x1c0
+			VF610_PAD_DDR_A9__DDR_A_9               0x1c0
+			VF610_PAD_DDR_A8__DDR_A_8               0x1c0
+			VF610_PAD_DDR_A7__DDR_A_7               0x1c0
+			VF610_PAD_DDR_A6__DDR_A_6               0x1c0
+			VF610_PAD_DDR_A5__DDR_A_5               0x1c0
+			VF610_PAD_DDR_A4__DDR_A_4               0x1c0
+			VF610_PAD_DDR_A3__DDR_A_3               0x1c0
+			VF610_PAD_DDR_A2__DDR_A_2               0x1c0
+			VF610_PAD_DDR_A1__DDR_A_1               0x1c0
+			VF610_PAD_DDR_A0__DDR_A_0               0x1c0
+			VF610_PAD_DDR_BA2__DDR_BA_2             0x1c0
+			VF610_PAD_DDR_BA1__DDR_BA_1             0x1c0
+			VF610_PAD_DDR_BA0__DDR_BA_0             0x1c0
+			VF610_PAD_DDR_CAS__DDR_CAS_B            0x1c0
+			VF610_PAD_DDR_CKE__DDR_CKE_0            0x1c0
+			VF610_PAD_DDR_CLK__DDR_CLK_0            0x101c0
+			VF610_PAD_DDR_CS__DDR_CS_B_0            0x1c0
+			VF610_PAD_DDR_D15__DDR_D_15             0x1c0
+			VF610_PAD_DDR_D14__DDR_D_14             0x1c0
+			VF610_PAD_DDR_D13__DDR_D_13             0x1c0
+			VF610_PAD_DDR_D12__DDR_D_12             0x1c0
+			VF610_PAD_DDR_D11__DDR_D_11             0x1c0
+			VF610_PAD_DDR_D10__DDR_D_10             0x1c0
+			VF610_PAD_DDR_D9__DDR_D_9               0x1c0
+			VF610_PAD_DDR_D8__DDR_D_8               0x1c0
+			VF610_PAD_DDR_D7__DDR_D_7               0x1c0
+			VF610_PAD_DDR_D6__DDR_D_6               0x1c0
+			VF610_PAD_DDR_D5__DDR_D_5               0x1c0
+			VF610_PAD_DDR_D4__DDR_D_4               0x1c0
+			VF610_PAD_DDR_D3__DDR_D_3               0x1c0
+			VF610_PAD_DDR_D2__DDR_D_2               0x1c0
+			VF610_PAD_DDR_D1__DDR_D_1               0x1c0
+			VF610_PAD_DDR_D0__DDR_D_0               0x1c0
+			VF610_PAD_DDR_DQM1__DDR_DQM_1           0x1c0
+			VF610_PAD_DDR_DQM0__DDR_DQM_0           0x1c0
+			VF610_PAD_DDR_DQS1__DDR_DQS_1           0x101c0
+			VF610_PAD_DDR_DQS0__DDR_DQS_0           0x101c0
+			VF610_PAD_DDR_RAS__DDR_RAS_B            0x1c0
+			VF610_PAD_DDR_WE__DDR_WE_B              0x1c0
+			VF610_PAD_DDR_ODT1__DDR_ODT_0           0x1c0
+			VF610_PAD_DDR_ODT0__DDR_ODT_1           0x1c0
+			VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1    0x1c0
+			VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2    0x1c0
+			VF610_PAD_DDR_RESETB                    0x1006c
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_eth: ethgrp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN              0x30dd
+			VF610_PAD_PTC0__ENET_RMII0_MDC          0x30de
+			VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df
+			VF610_PAD_PTC2__ENET_RMII0_CRS          0x30dd
+			VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd
+			VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd
+			VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd
+			VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de
+			VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de
+			VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de
+		>;
+	};
+
+	pinctrl_eth1: eth1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30de
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30df
+			VF610_PAD_PTC11__ENET_RMII1_CRS	0x30dd
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30dd
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30dd
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30dd
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30de
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30de
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30de
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL		0x34df
+			VF610_PAD_PTA23__I2C2_SDA		0x34df
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD31__NF_IO15		0x28df
+			VF610_PAD_PTD30__NF_IO14		0x28df
+			VF610_PAD_PTD29__NF_IO13		0x28df
+			VF610_PAD_PTD28__NF_IO12		0x28df
+			VF610_PAD_PTD27__NF_IO11		0x28df
+			VF610_PAD_PTD26__NF_IO10		0x28df
+			VF610_PAD_PTD25__NF_IO9		0x28df
+			VF610_PAD_PTD24__NF_IO8		0x28df
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B		0x28c2
+			VF610_PAD_PTB25__NF_CE0_B		0x28c2
+			VF610_PAD_PTB27__NF_RE_B		0x28c2
+			VF610_PAD_PTC26__NF_RB_B		0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__QSPI0_A_QSCK	0x397f
+			VF610_PAD_PTD1__QSPI0_A_CS0	0x397f
+			VF610_PAD_PTD2__QSPI0_A_DATA3	0x397f
+			VF610_PAD_PTD3__QSPI0_A_DATA2	0x397f
+			VF610_PAD_PTD4__QSPI0_A_DATA1	0x397f
+			VF610_PAD_PTD5__QSPI0_A_DATA0	0x397f
+			VF610_PAD_PTD7__QSPI0_B_QSCK	0x397f
+			VF610_PAD_PTD8__QSPI0_B_CS0	0x397f
+			VF610_PAD_PTD11__QSPI0_B_DATA1	0x397f
+			VF610_PAD_PTD12__QSPI0_B_DATA0	0x397f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX                0x21a2
+			VF610_PAD_PTB5__UART1_RX                0x21a1
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+
+	status = "okay";
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+
+	bus-num = <0>;
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: spi_flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <108000000>;
+		reg = <0>;
+	};
+
+	qflash1: spi_flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <66000000>;
+		reg = <1>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/vf610-pinfunc.h b/roms/u-boot/arch/arm/dts/vf610-pinfunc.h
new file mode 100644
index 000000000..945671907
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf610-pinfunc.h
@@ -0,0 +1,860 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_VF610_PINFUNC_H
+#define __DTS_VF610_PINFUNC_H
+
+/*
+ * The pin function ID for VF610 is a tuple of:
+ * <mux_reg input_reg mux_mode input_val>
+ */
+
+#define ALT0	0x0
+#define ALT1	0x1
+#define ALT2	0x2
+#define ALT3	0x3
+#define ALT4	0x4
+#define ALT5	0x5
+#define ALT6	0x6
+#define ALT7	0x7
+
+
+#define VF610_PAD_PTA6__GPIO_0			0x000 0x000 ALT0 0x0
+#define VF610_PAD_PTA6__RMII_CLKOUT		0x000 0x000 ALT1 0x0
+#define VF610_PAD_PTA6__RMII_CLKIN		0x000 0x2F0 ALT2 0x0
+#define VF610_PAD_PTA6__DCU1_TCON11		0x000 0x000 ALT4 0x0
+#define VF610_PAD_PTA6__DCU1_R2			0x000 0x000 ALT7 0x0
+#define VF610_PAD_PTA8__GPIO_1			0x004 0x000 ALT0 0x0
+#define VF610_PAD_PTA8__TCLK			0x004 0x000 ALT1 0x0
+#define VF610_PAD_PTA8__DCU0_R0			0x004 0x000 ALT4 0x0
+#define VF610_PAD_PTA8__MLB_CLK			0x004 0x354 ALT7 0x0
+#define VF610_PAD_PTA9__GPIO_2			0x008 0x000 ALT0 0x0
+#define VF610_PAD_PTA9__TDI			0x008 0x000 ALT1 0x0
+#define VF610_PAD_PTA9__RMII_CLKOUT		0x008 0x000 ALT2 0x0
+#define VF610_PAD_PTA9__RMII_CLKIN		0x008 0x2F0 ALT3 0x1
+#define VF610_PAD_PTA9__DCU0_R1			0x008 0x000 ALT4 0x0
+#define VF610_PAD_PTA9__WDOG_B			0x008 0x000 ALT6 0x0
+#define VF610_PAD_PTA10__GPIO_3			0x00C 0x000 ALT0 0x0
+#define VF610_PAD_PTA10__TDO			0x00C 0x000 ALT1 0x0
+#define VF610_PAD_PTA10__EXT_AUDIO_MCLK		0x00C 0x2EC ALT2 0x0
+#define VF610_PAD_PTA10__DCU0_G0		0x00C 0x000 ALT4 0x0
+#define VF610_PAD_PTA10__ENET_TS_CLKIN		0x00C 0x2F4 ALT6 0x0
+#define VF610_PAD_PTA10__MLB_SIGNAL		0x00C 0x35C ALT7 0x0
+#define VF610_PAD_PTA11__GPIO_4			0x010 0x000 ALT0 0x0
+#define VF610_PAD_PTA11__TMS			0x010 0x000 ALT1 0x0
+#define VF610_PAD_PTA11__DCU0_G1		0x010 0x000 ALT4 0x0
+#define VF610_PAD_PTA11__MLB_DATA		0x010 0x358 ALT7 0x0
+#define VF610_PAD_PTA12__GPIO_5			0x014 0x000 ALT0 0x0
+#define VF610_PAD_PTA12__TRACECK		0x014 0x000 ALT1 0x0
+#define VF610_PAD_PTA12__EXT_AUDIO_MCLK		0x014 0x2EC ALT2 0x1
+#define VF610_PAD_PTA12__VIU_DATA13		0x014 0x000 ALT6 0x0
+#define VF610_PAD_PTA12__I2C0_SCL		0x014 0x33C ALT7 0x0
+#define VF610_PAD_PTA16__GPIO_6			0x018 0x000 ALT0 0x0
+#define VF610_PAD_PTA16__TRACED0		0x018 0x000 ALT1 0x0
+#define VF610_PAD_PTA16__USB0_VBUS_EN		0x018 0x000 ALT2 0x0
+#define VF610_PAD_PTA16__ADC1_SE0		0x018 0x000 ALT3 0x0
+#define VF610_PAD_PTA16__LCD29			0x018 0x000 ALT4 0x0
+#define VF610_PAD_PTA16__SAI2_TX_BCLK		0x018 0x370 ALT5 0x0
+#define VF610_PAD_PTA16__VIU_DATA14		0x018 0x000 ALT6 0x0
+#define VF610_PAD_PTA16__I2C0_SDA		0x018 0x340 ALT7 0x0
+#define VF610_PAD_PTA17__GPIO_7			0x01C 0x000 ALT0 0x0
+#define VF610_PAD_PTA17__TRACED1		0x01C 0x000 ALT1 0x0
+#define VF610_PAD_PTA17__USB0_VBUS_OC		0x01C 0x000 ALT2 0x0
+#define VF610_PAD_PTA17__ADC1_SE1		0x01C 0x000 ALT3 0x0
+#define VF610_PAD_PTA17__LCD30			0x01C 0x000 ALT4 0x0
+#define VF610_PAD_PTA17__USB0_SOF_PULSE		0x01C 0x000 ALT5 0x0
+#define VF610_PAD_PTA17__VIU_DATA15		0x01C 0x000 ALT6 0x0
+#define VF610_PAD_PTA17__I2C1_SCL		0x01C 0x344 ALT7 0x0
+#define VF610_PAD_PTA18__GPIO_8			0x020 0x000 ALT0 0x0
+#define VF610_PAD_PTA18__TRACED2		0x020 0x000 ALT1 0x0
+#define VF610_PAD_PTA18__ADC0_SE0		0x020 0x000 ALT2 0x0
+#define VF610_PAD_PTA18__FTM1_QD_PHA		0x020 0x334 ALT3 0x0
+#define VF610_PAD_PTA18__LCD31			0x020 0x000 ALT4 0x0
+#define VF610_PAD_PTA18__SAI2_TX_DATA		0x020 0x000 ALT5 0x0
+#define VF610_PAD_PTA18__VIU_DATA16		0x020 0x000 ALT6 0x0
+#define VF610_PAD_PTA18__I2C1_SDA		0x020 0x348 ALT7 0x0
+#define VF610_PAD_PTA19__GPIO_9			0x024 0x000 ALT0 0x0
+#define VF610_PAD_PTA19__TRACED3		0x024 0x000 ALT1 0x0
+#define VF610_PAD_PTA19__ADC0_SE1		0x024 0x000 ALT2 0x0
+#define VF610_PAD_PTA19__FTM1_QD_PHB		0x024 0x338 ALT3 0x0
+#define VF610_PAD_PTA19__LCD32			0x024 0x000 ALT4 0x0
+#define VF610_PAD_PTA19__SAI2_TX_SYNC		0x024 0x000 ALT5 0x0
+#define VF610_PAD_PTA19__VIU_DATA17		0x024 0x000 ALT6 0x0
+#define VF610_PAD_PTA19__QSPI1_A_QSCK		0x024 0x374 ALT7 0x0
+#define VF610_PAD_PTA20__GPIO_10		0x028 0x000 ALT0 0x0
+#define VF610_PAD_PTA20__TRACED4		0x028 0x000 ALT1 0x0
+#define VF610_PAD_PTA20__LCD33			0x028 0x000 ALT4 0x0
+#define VF610_PAD_PTA20__UART3_TX		0x028 0x394 ALT6 0x0
+#define VF610_PAD_PTA20__DCU1_HSYNC		0x028 0x000 ALT7 0x0
+#define VF610_PAD_PTA21__GPIO_11		0x02C 0x000 ALT0 0x0
+#define VF610_PAD_PTA21__TRACED5		0x02C 0x000 ALT1 0x0
+#define VF610_PAD_PTA21__SAI2_RX_BCLK		0x02C 0x364 ALT5 0x0
+#define VF610_PAD_PTA21__UART3_RX		0x02C 0x390 ALT6 0x0
+#define VF610_PAD_PTA21__DCU1_VSYNC		0x02C 0x000 ALT7 0x0
+#define VF610_PAD_PTA22__GPIO_12		0x030 0x000 ALT0 0x0
+#define VF610_PAD_PTA22__TRACED6		0x030 0x000 ALT1 0x0
+#define VF610_PAD_PTA22__SAI2_RX_DATA		0x030 0x368 ALT5 0x0
+#define VF610_PAD_PTA22__I2C2_SCL		0x030 0x34C ALT6 0x0
+#define VF610_PAD_PTA22__DCU1_TAG		0x030 0x000 ALT7 0x0
+#define VF610_PAD_PTA23__GPIO_13		0x034 0x000 ALT0 0x0
+#define VF610_PAD_PTA23__TRACED7		0x034 0x000 ALT1 0x0
+#define VF610_PAD_PTA23__SAI2_RX_SYNC		0x034 0x36C ALT5 0x0
+#define VF610_PAD_PTA23__I2C2_SDA		0x034 0x350 ALT6 0x0
+#define VF610_PAD_PTA23__DCU1_DE		0x034 0x000 ALT7 0x0
+#define VF610_PAD_PTA24__GPIO_14		0x038 0x000 ALT0 0x0
+#define VF610_PAD_PTA24__TRACED8		0x038 0x000 ALT1 0x0
+#define VF610_PAD_PTA24__USB1_VBUS_EN		0x038 0x000 ALT2 0x0
+#define VF610_PAD_PTA24__ESDHC1_CLK		0x038 0x000 ALT5 0x0
+#define VF610_PAD_PTA24__DCU1_TCON4		0x038 0x000 ALT6 0x0
+#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL	0x038 0x000 ALT7 0x0
+#define VF610_PAD_PTA25__GPIO_15		0x03C 0x000 ALT0 0x0
+#define VF610_PAD_PTA25__TRACED9		0x03C 0x000 ALT1 0x0
+#define VF610_PAD_PTA25__USB1_VBUS_OC		0x03C 0x000 ALT2 0x0
+#define VF610_PAD_PTA25__ESDHC1_CMD		0x03C 0x000 ALT5 0x0
+#define VF610_PAD_PTA25__DCU1_TCON5		0x03C 0x000 ALT6 0x0
+#define VF610_PAD_PTA26__GPIO_16		0x040 0x000 ALT0 0x0
+#define VF610_PAD_PTA26__TRACED10		0x040 0x000 ALT1 0x0
+#define VF610_PAD_PTA26__SAI3_TX_BCLK		0x040 0x000 ALT2 0x0
+#define VF610_PAD_PTA26__ESDHC1_DAT0		0x040 0x000 ALT5 0x0
+#define VF610_PAD_PTA26__DCU1_TCON6		0x040 0x000 ALT6 0x0
+#define VF610_PAD_PTA27__GPIO_17		0x044 0x000 ALT0 0x0
+#define VF610_PAD_PTA27__TRACED11		0x044 0x000 ALT1 0x0
+#define VF610_PAD_PTA27__SAI3_RX_BCLK		0x044 0x000 ALT2 0x0
+#define VF610_PAD_PTA27__ESDHC1_DAT1		0x044 0x000 ALT5 0x0
+#define VF610_PAD_PTA27__DCU1_TCON7		0x044 0x000 ALT6 0x0
+#define VF610_PAD_PTA28__GPIO_18		0x048 0x000 ALT0 0x0
+#define VF610_PAD_PTA28__TRACED12		0x048 0x000 ALT1 0x0
+#define VF610_PAD_PTA28__SAI3_RX_DATA		0x048 0x000 ALT2 0x0
+#define VF610_PAD_PTA28__ENET1_1588_TMR0	0x048 0x000 ALT3 0x0
+#define VF610_PAD_PTA28__UART4_TX		0x048 0x000 ALT4 0x0
+#define VF610_PAD_PTA28__ESDHC1_DATA2		0x048 0x000 ALT5 0x0
+#define VF610_PAD_PTA28__DCU1_TCON8		0x048 0x000 ALT6 0x0
+#define VF610_PAD_PTA29__GPIO_19		0x04C 0x000 ALT0 0x0
+#define VF610_PAD_PTA29__TRACED13		0x04C 0x000 ALT1 0x0
+#define VF610_PAD_PTA29__SAI3_TX_DATA		0x04C 0x000 ALT2 0x0
+#define VF610_PAD_PTA29__ENET1_1588_TMR1	0x04C 0x000 ALT3 0x0
+#define VF610_PAD_PTA29__UART4_RX		0x04C 0x000 ALT4 0x0
+#define VF610_PAD_PTA29__ESDHC1_DAT3		0x04C 0x000 ALT5 0x0
+#define VF610_PAD_PTA29__DCU1_TCON9		0x04C 0x000 ALT6 0x0
+#define VF610_PAD_PTA30__GPIO_20		0x050 0x000 ALT0 0x0
+#define VF610_PAD_PTA30__TRACED14		0x050 0x000 ALT1 0x0
+#define VF610_PAD_PTA30__SAI3_RX_SYNC		0x050 0x000 ALT2 0x0
+#define VF610_PAD_PTA30__ENET1_1588_TMR2	0x050 0x000 ALT3 0x0
+#define VF610_PAD_PTA30__UART4_RTS		0x050 0x000 ALT4 0x0
+#define VF610_PAD_PTA30__I2C3_SCL		0x050 0x000 ALT5 0x0
+#define VF610_PAD_PTA30__UART3_TX		0x050 0x394 ALT7 0x1
+#define VF610_PAD_PTA31__GPIO_21		0x054 0x000 ALT0 0x0
+#define VF610_PAD_PTA31__TRACED15		0x054 0x000 ALT1 0x0
+#define VF610_PAD_PTA31__SAI3_TX_SYNC		0x054 0x000 ALT2 0x0
+#define VF610_PAD_PTA31__ENET1_1588_TMR3	0x054 0x000 ALT3 0x0
+#define VF610_PAD_PTA31__UART4_CTS		0x054 0x000 ALT4 0x0
+#define VF610_PAD_PTA31__I2C3_SDA		0x054 0x000 ALT5 0x0
+#define VF610_PAD_PTA31__UART3_RX		0x054 0x390 ALT7 0x1
+#define VF610_PAD_PTB0__GPIO_22			0x058 0x000 ALT0 0x0
+#define VF610_PAD_PTB0__FTM0_CH0		0x058 0x000 ALT1 0x0
+#define VF610_PAD_PTB0__ADC0_SE2		0x058 0x000 ALT2 0x0
+#define VF610_PAD_PTB0__TRACE_CTL		0x058 0x000 ALT3 0x0
+#define VF610_PAD_PTB0__LCD34			0x058 0x000 ALT4 0x0
+#define VF610_PAD_PTB0__SAI2_RX_BCLK		0x058 0x364 ALT5 0x1
+#define VF610_PAD_PTB0__VIU_DATA18		0x058 0x000 ALT6 0x0
+#define VF610_PAD_PTB0__QSPI1_A_QPCS0		0x058 0x000 ALT7 0x0
+#define VF610_PAD_PTB1__GPIO_23			0x05C 0x000 ALT0 0x0
+#define VF610_PAD_PTB1__FTM0_CH1		0x05C 0x000 ALT1 0x0
+#define VF610_PAD_PTB1__ADC0_SE3		0x05C 0x000 ALT2 0x0
+#define VF610_PAD_PTB1__SRC_RCON30		0x05C 0x000 ALT3 0x0
+#define VF610_PAD_PTB1__LCD35			0x05C 0x000 ALT4 0x0
+#define VF610_PAD_PTB1__SAI2_RX_DATA		0x05C 0x368 ALT5 0x1
+#define VF610_PAD_PTB1__VIU_DATA19		0x05C 0x000 ALT6 0x0
+#define VF610_PAD_PTB1__QSPI1_A_DATA3		0x05C 0x000 ALT7 0x0
+#define VF610_PAD_PTB2__GPIO_24			0x060 0x000 ALT0 0x0
+#define VF610_PAD_PTB2__FTM0_CH2		0x060 0x000 ALT1 0x0
+#define VF610_PAD_PTB2__ADC1_SE2		0x060 0x000 ALT2 0x0
+#define VF610_PAD_PTB2__SRC_RCON31		0x060 0x000 ALT3 0x0
+#define VF610_PAD_PTB2__LCD36			0x060 0x000 ALT4 0x0
+#define VF610_PAD_PTB2__SAI2_RX_SYNC		0x060 0x36C ALT5 0x1
+#define VF610_PAD_PTB2__VIDEO_IN0_DATA20	0x060 0x000 ALT6 0x0
+#define VF610_PAD_PTB2__QSPI1_A_DATA2		0x060 0x000 ALT7 0x0
+#define VF610_PAD_PTB3__GPIO_25			0x064 0x000 ALT0 0x0
+#define VF610_PAD_PTB3__FTM0_CH3		0x064 0x000 ALT1 0x0
+#define VF610_PAD_PTB3__ADC1_SE3		0x064 0x000 ALT2 0x0
+#define VF610_PAD_PTB3__PDB_EXTRIG		0x064 0x000 ALT3 0x0
+#define VF610_PAD_PTB3__LCD37			0x064 0x000 ALT4 0x0
+#define VF610_PAD_PTB3__VIU_DATA21		0x064 0x000 ALT6 0x0
+#define VF610_PAD_PTB3__QSPI1_A_DATA1		0x064 0x000 ALT7 0x0
+#define VF610_PAD_PTB4__GPIO_26			0x068 0x000 ALT0 0x0
+#define VF610_PAD_PTB4__FTM0_CH4		0x068 0x000 ALT1 0x0
+#define VF610_PAD_PTB4__UART1_TX		0x068 0x380 ALT2 0x0
+#define VF610_PAD_PTB4__ADC0_SE4		0x068 0x000 ALT3 0x0
+#define VF610_PAD_PTB4__LCD38			0x068 0x000 ALT4 0x0
+#define VF610_PAD_PTB4__VIU_FID			0x068 0x3A8 ALT5 0x0
+#define VF610_PAD_PTB4__VIU_DATA22		0x068 0x000 ALT6 0x0
+#define VF610_PAD_PTB4__QSPI1_A_DATA0		0x068 0x000 ALT7 0x0
+#define VF610_PAD_PTB5__GPIO_27			0x06C 0x000 ALT0 0x0
+#define VF610_PAD_PTB5__FTM0_CH5		0x06C 0x000 ALT1 0x0
+#define VF610_PAD_PTB5__UART1_RX		0x06C 0x37C ALT2 0x0
+#define VF610_PAD_PTB5__ADC1_SE4		0x06C 0x000 ALT3 0x0
+#define VF610_PAD_PTB5__LCD39			0x06C 0x000 ALT4 0x0
+#define VF610_PAD_PTB5__VIU_DE			0x06C 0x3A4 ALT5 0x0
+#define VF610_PAD_PTB5__QSPI1_A_DQS		0x06C 0x000 ALT7 0x0
+#define VF610_PAD_PTB6__GPIO_28			0x070 0x000 ALT0 0x0
+#define VF610_PAD_PTB6__FTM0_CH6		0x070 0x000 ALT1 0x0
+#define VF610_PAD_PTB6__UART1_RTS		0x070 0x000 ALT2 0x0
+#define VF610_PAD_PTB6__QSPI0_QPCS1_A		0x070 0x000 ALT3 0x0
+#define VF610_PAD_PTB6__LCD_LCD40		0x070 0x000 ALT4 0x0
+#define VF610_PAD_PTB6__FB_CLKOUT		0x070 0x000 ALT5 0x0
+#define VF610_PAD_PTB6__VIU_HSYNC		0x070 0x000 ALT6 0x0
+#define VF610_PAD_PTB6__UART2_TX		0x070 0x38C ALT7 0x0
+#define VF610_PAD_PTB7__GPIO_29			0x074 0x000 ALT0 0x0
+#define VF610_PAD_PTB7__FTM0_CH7		0x074 0x000 ALT1 0x0
+#define VF610_PAD_PTB7__UART1_CTS		0x074 0x378 ALT2 0x0
+#define VF610_PAD_PTB7__QSPI0_B_QPCS1		0x074 0x000 ALT3 0x0
+#define VF610_PAD_PTB7__LCD41			0x074 0x000 ALT4 0x0
+#define VF610_PAD_PTB7__VIU_VSYNC		0x074 0x000 ALT6 0x0
+#define VF610_PAD_PTB7__UART2_RX		0x074 0x388 ALT7 0x0
+#define VF610_PAD_PTB8__GPIO_30			0x078 0x000 ALT0 0x0
+#define VF610_PAD_PTB8__FTM1_CH0		0x078 0x32C ALT1 0x0
+#define VF610_PAD_PTB8__FTM1_QD_PHA		0x078 0x334 ALT3 0x1
+#define VF610_PAD_PTB8__VIU_DE			0x078 0x3A4 ALT5 0x1
+#define VF610_PAD_PTB8__DCU1_R6			0x078 0x000 ALT7 0x0
+#define VF610_PAD_PTB9__GPIO_31			0x07C 0x000 ALT0 0x0
+#define VF610_PAD_PTB9__FTM1_CH1		0x07C 0x330 ALT1 0x0
+#define VF610_PAD_PTB9__FTM1_QD_PHB		0x07C 0x338 ALT3 0x1
+#define VF610_PAD_PTB9__DCU1_R7			0x07C 0x000 ALT7 0x0
+#define VF610_PAD_PTB10__GPIO_32		0x080 0x000 ALT0 0x0
+#define VF610_PAD_PTB10__UART0_TX		0x080 0x000 ALT1 0x0
+#define VF610_PAD_PTB10__DCU0_TCON4		0x080 0x000 ALT4 0x0
+#define VF610_PAD_PTB10__VIU_DE			0x080 0x3A4 ALT5 0x2
+#define VF610_PAD_PTB10__CKO1			0x080 0x000 ALT6 0x0
+#define VF610_PAD_PTB10__ENET_TS_CLKIN		0x080 0x2F4 ALT7 0x1
+#define VF610_PAD_PTB11__GPIO_33		0x084 0x000 ALT0 0x0
+#define VF610_PAD_PTB11__UART0_RX		0x084 0x000 ALT1 0x0
+#define VF610_PAD_PTB11__DCU0_TCON5		0x084 0x000 ALT4 0x0
+#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B	0x084 0x000 ALT5 0x0
+#define VF610_PAD_PTB11__CKO2			0x084 0x000 ALT6 0x0
+#define VF610_PAD_PTB11_ENET0_1588_TMR0		0x084 0x304 ALT7 0x0
+#define VF610_PAD_PTB12__GPIO_34		0x088 0x000 ALT0 0x0
+#define VF610_PAD_PTB12__UART0_RTS		0x088 0x000 ALT1 0x0
+#define VF610_PAD_PTB12__DSPI0_CS5		0x088 0x000 ALT3 0x0
+#define VF610_PAD_PTB12__DCU0_TCON6		0x088 0x000 ALT4 0x0
+#define VF610_PAD_PTB12__FB_AD1			0x088 0x000 ALT5 0x0
+#define VF610_PAD_PTB12__NMI			0x088 0x000 ALT6 0x0
+#define VF610_PAD_PTB12__ENET0_1588_TMR1	0x088 0x308 ALT7 0x0
+#define VF610_PAD_PTB13__GPIO_35		0x08C 0x000 ALT0 0x0
+#define VF610_PAD_PTB13__UART0_CTS		0x08C 0x000 ALT1 0x0
+#define VF610_PAD_PTB13__DSPI0_CS4		0x08C 0x000 ALT3 0x0
+#define VF610_PAD_PTB13__DCU0_TCON7		0x08C 0x000 ALT4 0x0
+#define VF610_PAD_PTB13__FB_AD0			0x08C 0x000 ALT5 0x0
+#define VF610_PAD_PTB13__TRACE_CTL		0x08C 0x000 ALT6 0x0
+#define VF610_PAD_PTB14__GPIO_36		0x090 0x000 ALT0 0x0
+#define VF610_PAD_PTB14__CAN0_RX		0x090 0x000 ALT1 0x0
+#define VF610_PAD_PTB14__I2C0_SCL		0x090 0x33C ALT2 0x1
+#define VF610_PAD_PTB14__DCU0_TCON8		0x090 0x000 ALT4 0x0
+#define VF610_PAD_PTB14__DCU1_PCLK		0x090 0x000 ALT7 0x0
+#define VF610_PAD_PTB15__GPIO_37		0x094 0x000 ALT0 0x0
+#define VF610_PAD_PTB15__CAN0_TX		0x094 0x000 ALT1 0x0
+#define VF610_PAD_PTB15__I2C0_SDA		0x094 0x340 ALT2 0x1
+#define VF610_PAD_PTB15__DCU0_TCON9		0x094 0x000 ALT4 0x0
+#define VF610_PAD_PTB15__VIU_PIX_CLK		0x094 0x3AC ALT7 0x0
+#define VF610_PAD_PTB16__GPIO_38		0x098 0x000 ALT0 0x0
+#define VF610_PAD_PTB16__CAN1_RX		0x098 0x000 ALT1 0x0
+#define VF610_PAD_PTB16__I2C1_SCL		0x098 0x344 ALT2 0x1
+#define VF610_PAD_PTB16__DCU0_TCON10		0x098 0x000 ALT4 0x0
+#define VF610_PAD_PTB17__GPIO_39		0x09C 0x000 ALT0 0x0
+#define VF610_PAD_PTB17__CAN1_TX		0x09C 0x000 ALT1 0x0
+#define VF610_PAD_PTB17__I2C1_SDA		0x09C 0x348 ALT2 0x1
+#define VF610_PAD_PTB17__DCU0_TCON11		0x09C 0x000 ALT4 0x0
+#define VF610_PAD_PTB18__GPIO_40		0x0A0 0x000 ALT0 0x0
+#define VF610_PAD_PTB18__DSPI0_CS1		0x0A0 0x000 ALT1 0x0
+#define VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x0A0 0x2EC ALT2 0x2
+#define VF610_PAD_PTB18__VIU_DATA9		0x0A0 0x000 ALT6 0x0
+#define VF610_PAD_PTB19__GPIO_41		0x0A4 0x000 ALT0 0x0
+#define VF610_PAD_PTB19__DSPI0_CS0		0x0A4 0x000 ALT1 0x0
+#define VF610_PAD_PTB19__VIU_DATA10		0x0A4 0x000 ALT6 0x0
+#define VF610_PAD_PTB20__GPIO_42		0x0A8 0x000 ALT0 0x0
+#define VF610_PAD_PTB20__DSPI0_SIN		0x0A8 0x000 ALT1 0x0
+#define VF610_PAD_PTB20__LCD42			0x0A8 0x000 ALT4 0x0
+#define VF610_PAD_PTB20__VIU_DATA11		0x0A8 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__GPIO_43		0x0AC 0x000 ALT0 0x0
+#define VF610_PAD_PTB21__DSPI0_SOUT		0x0AC 0x000 ALT1 0x0
+#define VF610_PAD_PTB21__LCD43			0x0AC 0x000 ALT4 0x0
+#define VF610_PAD_PTB21__VIU_DATA12		0x0AC 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__DCU1_PCLK		0x0AC 0x000 ALT7 0x0
+#define VF610_PAD_PTB22__GPIO_44		0x0B0 0x000 ALT0 0x0
+#define VF610_PAD_PTB22__DSPI0_SCK		0x0B0 0x000 ALT1 0x0
+#define VF610_PAD_PTB22__VLCD			0x0B0 0x000 ALT4 0x0
+#define VF610_PAD_PTB22__VIU_FID		0x0B0 0x3A8 ALT5 0x1
+#define VF610_PAD_PTC0__GPIO_45			0x0B4 0x000 ALT0 0x0
+#define VF610_PAD_PTC0__ENET_RMII0_MDC		0x0B4 0x000 ALT1 0x0
+#define VF610_PAD_PTC0__FTM1_CH0		0x0B4 0x32C ALT2 0x1
+#define VF610_PAD_PTC0__DSPI0_CS3		0x0B4 0x000 ALT3 0x0
+#define VF610_PAD_PTC0__ESAI_SCKT		0x0B4 0x310 ALT4 0x0
+#define VF610_PAD_PTC0__ESDHC0_CLK		0x0B4 0x000 ALT5 0x0
+#define VF610_PAD_PTC0__VIU_DATA0		0x0B4 0x000 ALT6 0x0
+#define VF610_PAD_PTC0__SRC_RCON18		0x0B4 0x398 ALT7 0x0
+#define VF610_PAD_PTC1__GPIO_46			0x0B8 0x000 ALT0 0x0
+#define VF610_PAD_PTC1__ENET_RMII0_MDIO		0x0B8 0x000 ALT1 0x0
+#define VF610_PAD_PTC1__FTM1_CH1		0x0B8 0x330 ALT2 0x1
+#define VF610_PAD_PTC1__DSPI0_CS2		0x0B8 0x000 ALT3 0x0
+#define VF610_PAD_PTC1__ESAI_FST		0x0B8 0x30C ALT4 0x0
+#define VF610_PAD_PTC1__ESDHC0_CMD		0x0B8 0x000 ALT5 0x0
+#define VF610_PAD_PTC1__VIU_DATA1		0x0B8 0x000 ALT6 0x0
+#define VF610_PAD_PTC1__SRC_RCON19		0x0B8 0x39C ALT7 0x0
+#define VF610_PAD_PTC2__GPIO_47			0x0BC 0x000 ALT0 0x0
+#define VF610_PAD_PTC2__ENET_RMII0_CRS		0x0BC 0x000 ALT1 0x0
+#define VF610_PAD_PTC2__UART1_TX		0x0BC 0x380 ALT2 0x1
+#define VF610_PAD_PTC2__ESAI_SDO0		0x0BC 0x314 ALT4 0x0
+#define VF610_PAD_PTC2__ESDHC0_DAT0		0x0BC 0x000 ALT5 0x0
+#define VF610_PAD_PTC2__VIU_DATA2		0x0BC 0x000 ALT6 0x0
+#define VF610_PAD_PTC2__SRC_RCON20		0x0BC 0x3A0 ALT7 0x0
+#define VF610_PAD_PTC3__GPIO_48			0x0C0 0x000 ALT0 0x0
+#define VF610_PAD_PTC3__ENET_RMII0_RXD1		0x0C0 0x000 ALT1 0x0
+#define VF610_PAD_PTC3__UART1_RX		0x0C0 0x37C ALT2 0x1
+#define VF610_PAD_PTC3__ESAI_SDO1		0x0C0 0x318 ALT4 0x0
+#define VF610_PAD_PTC3__ESDHC0_DAT1		0x0C0 0x000 ALT5 0x0
+#define VF610_PAD_PTC3__VIU_DATA3		0x0C0 0x000 ALT6 0x0
+#define VF610_PAD_PTC3__DCU0_R0			0x0C0 0x000 ALT7 0x0
+#define VF610_PAD_PTC4__GPIO_49			0x0C4 0x000 ALT0 0x0
+#define VF610_PAD_PTC4__ENET_RMII0_RXD0		0x0C4 0x000 ALT1 0x0
+#define VF610_PAD_PTC4__UART1_RTS		0x0C4 0x000 ALT2 0x0
+#define VF610_PAD_PTC4__DSPI1_CS1		0x0C4 0x000 ALT3 0x0
+#define VF610_PAD_PTC4__ESAI_SDO2		0x0C4 0x31C ALT4 0x0
+#define VF610_PAD_PTC4__ESDHC0_DAT2		0x0C4 0x000 ALT5 0x0
+#define VF610_PAD_PTC4__VIU_DATA4		0x0C4 0x000 ALT6 0x0
+#define VF610_PAD_PTC4__DCU0_R1			0x0C4 0x000 ALT7 0x0
+#define VF610_PAD_PTC5__GPIO_50			0x0C8 0x000 ALT0 0x0
+#define VF610_PAD_PTC5__ENET_RMII0_RXER		0x0C8 0x000 ALT1 0x0
+#define VF610_PAD_PTC5__UART1_CTS		0x0C8 0x378 ALT2 0x1
+#define VF610_PAD_PTC5__DSPI1_CS0		0x0C8 0x300 ALT3 0x0
+#define VF610_PAD_PTC5__ESAI_SDO3		0x0C8 0x320 ALT4 0x0
+#define VF610_PAD_PTC5__ESDHC0_DAT3		0x0C8 0x000 ALT5 0x0
+#define VF610_PAD_PTC5__VIU_DATA5		0x0C8 0x000 ALT6 0x0
+#define VF610_PAD_PTC5__DCU0_G0			0x0C8 0x000 ALT7 0x0
+#define VF610_PAD_PTC6__GPIO_51			0x0CC 0x000 ALT0 0x0
+#define VF610_PAD_PTC6__ENET_RMII0_TXD1		0x0CC 0x000 ALT1 0x0
+#define VF610_PAD_PTC6__DSPI1_SIN		0x0CC 0x2FC ALT3 0x0
+#define VF610_PAD_PTC6__ESAI_SDI0		0x0CC 0x328 ALT4 0x0
+#define VF610_PAD_PTC6__ESDHC0_WP		0x0CC 0x000 ALT5 0x0
+#define VF610_PAD_PTC6__VIU_DATA6		0x0CC 0x000 ALT6 0x0
+#define VF610_PAD_PTC6__DCU0_G1			0x0CC 0x000 ALT7 0x0
+#define VF610_PAD_PTC7__GPIO_52			0x0D0 0x000 ALT0 0x0
+#define VF610_PAD_PTC7__ENET_RMII0_TXD0		0x0D0 0x000 ALT1 0x0
+#define VF610_PAD_PTC7__DSPI1_SOUT		0x0D0 0x000 ALT3 0x0
+#define VF610_PAD_PTC7__ESAI_SDI1		0x0D0 0x324 ALT4 0x0
+#define VF610_PAD_PTC7__VIU_DATA7		0x0D0 0x000 ALT6 0x0
+#define VF610_PAD_PTC7__DCU0_B0			0x0D0 0x000 ALT7 0x0
+#define VF610_PAD_PTC8__GPIO_53			0x0D4 0x000 ALT0 0x0
+#define VF610_PAD_PTC8__ENET_RMII0_TXEN		0x0D4 0x000 ALT1 0x0
+#define VF610_PAD_PTC8__DSPI1_SCK		0x0D4 0x2F8 ALT3 0x0
+#define VF610_PAD_PTC8__VIU_DATA8		0x0D4 0x000 ALT6 0x0
+#define VF610_PAD_PTC8__DCU0_B1			0x0D4 0x000 ALT7 0x0
+#define VF610_PAD_PTC9__GPIO_54			0x0D8 0x000 ALT0 0x0
+#define VF610_PAD_PTC9__ENET_RMII1_MDC		0x0D8 0x000 ALT1 0x0
+#define VF610_PAD_PTC9__ESAI_SCKT		0x0D8 0x310 ALT3 0x1
+#define VF610_PAD_PTC9__MLB_CLK			0x0D8 0x354 ALT6 0x1
+#define VF610_PAD_PTC9__DEBUG_OUT0		0x0D8 0x000 ALT7 0x0
+#define VF610_PAD_PTC10__GPIO_55		0x0DC 0x000 ALT0 0x0
+#define VF610_PAD_PTC10__ENET_RMII1_MDIO	0x0DC 0x000 ALT1 0x0
+#define VF610_PAD_PTC10__ESAI_FST		0x0DC 0x30C ALT3 0x1
+#define VF610_PAD_PTC10__MLB_SIGNAL		0x0DC 0x35C ALT6 0x1
+#define VF610_PAD_PTC10__DEBUG_OUT1		0x0DC 0x000 ALT7 0x0
+#define VF610_PAD_PTC11__GPIO_56		0x0E0 0x000 ALT0 0x0
+#define VF610_PAD_PTC11__ENET_RMII1_CRS		0x0E0 0x000 ALT1 0x0
+#define VF610_PAD_PTC11__ESAI_SDO0		0x0E0 0x314 ALT3 0x1
+#define VF610_PAD_PTC11__MLB_DATA		0x0E0 0x358 ALT6 0x1
+#define VF610_PAD_PTC11__DEBUG_OUT		0x0E0 0x000 ALT7 0x0
+#define VF610_PAD_PTC12__GPIO_57		0x0E4 0x000 ALT0 0x0
+#define VF610_PAD_PTC12__ENET_RMII1_RXD1	0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ESAI_SDO1		0x0E4 0x318 ALT3 0x1
+#define VF610_PAD_PTC12__SAI2_TX_BCLK		0x0E4 0x370 ALT5 0x1
+#define VF610_PAD_PTC12__DEBUG_OUT3		0x0E4 0x000 ALT7 0x0
+#define VF610_PAD_PTC13__GPIO_58		0x0E8 0x000 ALT0 0x0
+#define VF610_PAD_PTC13__ENET_RMII1_RXD0	0x0E8 0x000 ALT1 0x0
+#define VF610_PAD_PTC13__ESAI_SDO2		0x0E8 0x31C ALT3 0x1
+#define VF610_PAD_PTC13__SAI2_RX_BCLK		0x0E8 0x364 ALT5 0x2
+#define VF610_PAD_PTC13__DEBUG_OUT4		0x0E8 0x000 ALT7 0x0
+#define VF610_PAD_PTC14__GPIO_59		0x0EC 0x000 ALT0 0x0
+#define VF610_PAD_PTC14__ENET_RMII1_RXER	0x0EC 0x000 ALT1 0x0
+#define VF610_PAD_PTC14__ESAI_SDO3		0x0EC 0x320 ALT3 0x1
+#define VF610_PAD_PTC14__UART5_TX		0x0EC 0x000 ALT4 0x0
+#define VF610_PAD_PTC14__SAI2_RX_DATA		0x0EC 0x368 ALT5 0x2
+#define VF610_PAD_PTC14__ADC0_SE6		0x0EC 0x000 ALT6 0x0
+#define VF610_PAD_PTC14__DEBUG_OUT5		0x0EC 0x000 ALT7 0x0
+#define VF610_PAD_PTC15__GPIO_60		0x0F0 0x000 ALT0 0x0
+#define VF610_PAD_PTC15__ENET_RMII1_TXD1	0x0F0 0x000 ALT1 0x0
+#define VF610_PAD_PTC15__ESAI_SDI0		0x0F0 0x328 ALT3 0x1
+#define VF610_PAD_PTC15__UART5_RX		0x0F0 0x000 ALT4 0x0
+#define VF610_PAD_PTC15__SAI2_TX_DATA		0x0F0 0x000 ALT5 0x0
+#define VF610_PAD_PTC15__ADC0_SE7		0x0F0 0x000 ALT6 0x0
+#define VF610_PAD_PTC15__DEBUG_OUT6		0x0F0 0x000 ALT7 0x0
+#define VF610_PAD_PTC16__GPIO_61		0x0F4 0x000 ALT0 0x0
+#define VF610_PAD_PTC16__ENET_RMII1_TXD0	0x0F4 0x000 ALT1 0x0
+#define VF610_PAD_PTC16__ESAI_SDI1		0x0F4 0x324 ALT3 0x1
+#define VF610_PAD_PTC16__UART5_RTS		0x0F4 0x000 ALT4 0x0
+#define VF610_PAD_PTC16__SAI2_RX_SYNC		0x0F4 0x36C ALT5 0x2
+#define VF610_PAD_PTC16__ADC1_SE6		0x0F4 0x000 ALT6 0x0
+#define VF610_PAD_PTC16__DEBUG_OUT7		0x0F4 0x000 ALT7 0x0
+#define VF610_PAD_PTC17__GPIO_62		0x0F8 0x000 ALT0 0x0
+#define VF610_PAD_PTC17__ENET_RMII1_TXEN	0x0F8 0x000 ALT1 0x0
+#define VF610_PAD_PTC17__ADC1_SE7		0x0F8 0x000 ALT3 0x0
+#define VF610_PAD_PTC17__UART5_CTS		0x0F8 0x000 ALT4 0x0
+#define VF610_PAD_PTC17__SAI2_TX_SYNC		0x0F8 0x374 ALT5 0x1
+#define VF610_PAD_PTC17__USB1_SOF_PULSE		0x0F8 0x000 ALT6 0x0
+#define VF610_PAD_PTC17__DEBUG_OUT8		0x0F8 0x000 ALT7 0x0
+#define VF610_PAD_PTD31__GPIO_63		0x0FC 0x000 ALT0 0x0
+#define VF610_PAD_PTD31__FB_AD31		0x0FC 0x000 ALT1 0x0
+#define VF610_PAD_PTD31__NF_IO15		0x0FC 0x000 ALT2 0x0
+#define VF610_PAD_PTD31__FTM3_CH0		0x0FC 0x000 ALT4 0x0
+#define VF610_PAD_PTD31__DSPI2_CS1		0x0FC 0x000 ALT5 0x0
+#define VF610_PAD_PTD31__DEBUG_OUT9		0x0FC 0x000 ALT7 0x0
+#define VF610_PAD_PTD30__GPIO_64		0x100 0x000 ALT0 0x0
+#define VF610_PAD_PTD30__FB_AD30		0x100 0x000 ALT1 0x0
+#define VF610_PAD_PTD30__NF_IO14		0x100 0x000 ALT2 0x0
+#define VF610_PAD_PTD30__FTM3_CH1		0x100 0x000 ALT4 0x0
+#define VF610_PAD_PTD30__DSPI2_CS0		0x100 0x000 ALT5 0x0
+#define VF610_PAD_PTD30__DEBUG_OUT10		0x100 0x000 ALT7 0x0
+#define VF610_PAD_PTD29__GPIO_65		0x104 0x000 ALT0 0x0
+#define VF610_PAD_PTD29__FB_AD29		0x104 0x000 ALT1 0x0
+#define VF610_PAD_PTD29__NF_IO13		0x104 0x000 ALT2 0x0
+#define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
+#define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
+#define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
+#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
+#define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
+#define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
+#define VF610_PAD_PTD28__FTM3_CH3		0x108 0x000 ALT4 0x0
+#define VF610_PAD_PTD28__DSPI2_SOUT		0x108 0x000 ALT5 0x0
+#define VF610_PAD_PTD28__DEBUG_OUT12		0x108 0x000 ALT7 0x0
+#define VF610_PAD_PTD27__GPIO_67		0x10C 0x000 ALT0 0x0
+#define VF610_PAD_PTD27__FB_AD27		0x10C 0x000 ALT1 0x0
+#define VF610_PAD_PTD27__NF_IO11		0x10C 0x000 ALT2 0x0
+#define VF610_PAD_PTD27__I2C2_SDA		0x10C 0x350 ALT3 0x1
+#define VF610_PAD_PTD27__FTM3_CH4		0x10C 0x000 ALT4 0x0
+#define VF610_PAD_PTD27__DSPI2_SCK		0x10C 0x000 ALT5 0x0
+#define VF610_PAD_PTD27__DEBUG_OUT13		0x10C 0x000 ALT7 0x0
+#define VF610_PAD_PTD26__GPIO_68		0x110 0x000 ALT0 0x0
+#define VF610_PAD_PTD26__FB_AD26		0x110 0x000 ALT1 0x0
+#define VF610_PAD_PTD26__NF_IO10		0x110 0x000 ALT2 0x0
+#define VF610_PAD_PTD26__FTM3_CH5		0x110 0x000 ALT4 0x0
+#define VF610_PAD_PTD26__ESDHC1_WP		0x110 0x000 ALT5 0x0
+#define VF610_PAD_PTD26__DEBUG_OUT14		0x110 0x000 ALT7 0x0
+#define VF610_PAD_PTD25__GPIO_69		0x114 0x000 ALT0 0x0
+#define VF610_PAD_PTD25__FB_AD25		0x114 0x000 ALT1 0x0
+#define VF610_PAD_PTD25__NF_IO9			0x114 0x000 ALT2 0x0
+#define VF610_PAD_PTD25__FTM3_CH6		0x114 0x000 ALT4 0x0
+#define VF610_PAD_PTD25__DEBUG_OUT15		0x114 0x000 ALT7 0x0
+#define VF610_PAD_PTD24__GPIO_70		0x118 0x000 ALT0 0x0
+#define VF610_PAD_PTD24__FB_AD24		0x118 0x000 ALT1 0x0
+#define VF610_PAD_PTD24__NF_IO8			0x118 0x000 ALT2 0x0
+#define VF610_PAD_PTD24__FTM3_CH7		0x118 0x000 ALT4 0x0
+#define VF610_PAD_PTD24__DEBUG_OUT16		0x118 0x000 ALT7 0x0
+#define VF610_PAD_PTD23__GPIO_71		0x11C 0x000 ALT0 0x0
+#define VF610_PAD_PTD23__FB_AD23		0x11C 0x000 ALT1 0x0
+#define VF610_PAD_PTD23__NF_IO7			0x11C 0x000 ALT2 0x0
+#define VF610_PAD_PTD23__FTM2_CH0		0x11C 0x000 ALT3 0x0
+#define VF610_PAD_PTD23__ENET0_1588_TMR0	0x11C 0x304 ALT4 0x1
+#define VF610_PAD_PTD23__ESDHC0_DAT4		0x11C 0x000 ALT5 0x0
+#define VF610_PAD_PTD23__UART2_TX		0x11C 0x38C ALT6 0x1
+#define VF610_PAD_PTD23__DCU1_R3		0x11C 0x000 ALT7 0x0
+#define VF610_PAD_PTD22__GPIO_72		0x120 0x000 ALT0 0x0
+#define VF610_PAD_PTD22__FB_AD22		0x120 0x000 ALT1 0x0
+#define VF610_PAD_PTD22__NF_IO6			0x120 0x000 ALT2 0x0
+#define VF610_PAD_PTD22__FTM2_CH1		0x120 0x000 ALT3 0x0
+#define VF610_PAD_PTD22__ENET0_1588_TMR1	0x120 0x308 ALT4 0x1
+#define VF610_PAD_PTD22__ESDHC0_DAT5		0x120 0x000 ALT5 0x0
+#define VF610_PAD_PTD22__UART2_RX		0x120 0x388 ALT6 0x1
+#define VF610_PAD_PTD22__DCU1_R4		0x120 0x000 ALT7 0x0
+#define VF610_PAD_PTD21__GPIO_73		0x124 0x000 ALT0 0x0
+#define VF610_PAD_PTD21__FB_AD21		0x124 0x000 ALT1 0x0
+#define VF610_PAD_PTD21__NF_IO5			0x124 0x000 ALT2 0x0
+#define VF610_PAD_PTD21__ENET0_1588_TMR2	0x124 0x000 ALT4 0x0
+#define VF610_PAD_PTD21__ESDHC0_DAT6		0x124 0x000 ALT5 0x0
+#define VF610_PAD_PTD21__UART2_RTS		0x124 0x000 ALT6 0x0
+#define VF610_PAD_PTD21__DCU1_R5		0x124 0x000 ALT7 0x0
+#define VF610_PAD_PTD20__GPIO_74		0x128 0x000 ALT0 0x0
+#define VF610_PAD_PTD20__FB_AD20		0x128 0x000 ALT1 0x0
+#define VF610_PAD_PTD20__NF_IO4			0x128 0x000 ALT2 0x0
+#define VF610_PAD_PTD20__ENET0_1588_TMR3	0x128 0x000 ALT4 0x0
+#define VF610_PAD_PTD20__ESDHC0_DAT7		0x128 0x000 ALT5 0x0
+#define VF610_PAD_PTD20__UART2_CTS		0x128 0x384 ALT6 0x0
+#define VF610_PAD_PTD20__DCU1_R0		0x128 0x000 ALT7 0x0
+#define VF610_PAD_PTD19__GPIO_75		0x12C 0x000 ALT0 0x0
+#define VF610_PAD_PTD19__FB_AD19		0x12C 0x000 ALT1 0x0
+#define VF610_PAD_PTD19__NF_IO3			0x12C 0x000 ALT2 0x0
+#define VF610_PAD_PTD19__ESAI_SCKR		0x12C 0x000 ALT3 0x0
+#define VF610_PAD_PTD19__I2C0_SCL		0x12C 0x33C ALT4 0x2
+#define VF610_PAD_PTD19__FTM2_QD_PHA		0x12C 0x000 ALT5 0x0
+#define VF610_PAD_PTD19__DCU1_R1		0x12C 0x000 ALT7 0x0
+#define VF610_PAD_PTD18__GPIO_76		0x130 0x000 ALT0 0x0
+#define VF610_PAD_PTD18__FB_AD18		0x130 0x000 ALT1 0x0
+#define VF610_PAD_PTD18__NF_IO2			0x130 0x000 ALT2 0x0
+#define VF610_PAD_PTD18__ESAI_FSR		0x130 0x000 ALT3 0x0
+#define VF610_PAD_PTD18__I2C0_SDA		0x130 0x340 ALT4 0x2
+#define VF610_PAD_PTD18__FTM2_QD_PHB		0x130 0x000 ALT5 0x0
+#define VF610_PAD_PTD18__DCU1_G0		0x130 0x000 ALT7 0x0
+#define VF610_PAD_PTD17__GPIO_77		0x134 0x000 ALT0 0x0
+#define VF610_PAD_PTD17__FB_AD17		0x134 0x000 ALT1 0x0
+#define VF610_PAD_PTD17__NF_IO1			0x134 0x000 ALT2 0x0
+#define VF610_PAD_PTD17__ESAI_HCKR		0x134 0x000 ALT3 0x0
+#define VF610_PAD_PTD17__I2C1_SCL		0x134 0x344 ALT4 0x2
+#define VF610_PAD_PTD17__DCU1_G1		0x134 0x000 ALT7 0x0
+#define VF610_PAD_PTD16__GPIO_78		0x138 0x000 ALT0 0x0
+#define VF610_PAD_PTD16__FB_AD16		0x138 0x000 ALT1 0x0
+#define VF610_PAD_PTD16__NF_IO0			0x138 0x000 ALT2 0x0
+#define VF610_PAD_PTD16__ESAI_HCKT		0x138 0x000 ALT3 0x0
+#define VF610_PAD_PTD16__I2C1_SDA		0x138 0x348 ALT4 0x2
+#define VF610_PAD_PTD16__DCU1_G2		0x138 0x000 ALT7 0x0
+#define VF610_PAD_PTD0__GPIO_79			0x13C 0x000 ALT0 0x0
+#define VF610_PAD_PTD0__QSPI0_A_QSCK		0x13C 0x000 ALT1 0x0
+#define VF610_PAD_PTD0__UART2_TX		0x13C 0x38C ALT2 0x2
+#define VF610_PAD_PTD0__FB_AD15			0x13C 0x000 ALT4 0x0
+#define VF610_PAD_PTD0__SPDIF_EXTCLK		0x13C 0x000 ALT5 0x0
+#define VF610_PAD_PTD0__DEBUG_OUT17		0x13C 0x000 ALT7 0x0
+#define VF610_PAD_PTD1__GPIO_80			0x140 0x000 ALT0 0x0
+#define VF610_PAD_PTD1__QSPI0_A_CS0		0x140 0x000 ALT1 0x0
+#define VF610_PAD_PTD1__UART2_RX		0x140 0x388 ALT2 0x2
+#define VF610_PAD_PTD1__FB_AD14			0x140 0x000 ALT4 0x0
+#define VF610_PAD_PTD1__SPDIF_IN1		0x140 0x000 ALT5 0x0
+#define VF610_PAD_PTD1__DEBUG_OUT18		0x140 0x000 ALT7 0x0
+#define VF610_PAD_PTD2__GPIO_81			0x144 0x000 ALT0 0x0
+#define VF610_PAD_PTD2__QSPI0_A_DATA3		0x144 0x000 ALT1 0x0
+#define VF610_PAD_PTD2__UART2_RTS		0x144 0x000 ALT2 0x0
+#define VF610_PAD_PTD2__DSPI1_CS3		0x144 0x000 ALT3 0x0
+#define VF610_PAD_PTD2__FB_AD13			0x144 0x000 ALT4 0x0
+#define VF610_PAD_PTD2__SPDIF_OUT1		0x144 0x000 ALT5 0x0
+#define VF610_PAD_PTD2__DEBUG_OUT19		0x144 0x000 ALT7 0x0
+#define VF610_PAD_PTD3__GPIO_82			0x148 0x000 ALT0 0x0
+#define VF610_PAD_PTD3__QSPI0_A_DATA2		0x148 0x000 ALT1 0x0
+#define VF610_PAD_PTD3__UART2_CTS		0x148 0x384 ALT2 0x1
+#define VF610_PAD_PTD3__DSPI1_CS2		0x148 0x000 ALT3 0x0
+#define VF610_PAD_PTD3__FB_AD12			0x148 0x000 ALT4 0x0
+#define VF610_PAD_PTD3__SPDIF_PLOCK		0x148 0x000 ALT5 0x0
+#define VF610_PAD_PTD3__DEBUG_OUT20		0x148 0x000 ALT7 0x0
+#define VF610_PAD_PTD4__GPIO_83			0x14C 0x000 ALT0 0x0
+#define VF610_PAD_PTD4__QSPI0_A_DATA1		0x14C 0x000 ALT1 0x0
+#define VF610_PAD_PTD4__DSPI1_CS1		0x14C 0x000 ALT3 0x0
+#define VF610_PAD_PTD4__FB_AD11			0x14C 0x000 ALT4 0x0
+#define VF610_PAD_PTD4__SPDIF_SRCLK		0x14C 0x000 ALT5 0x0
+#define VF610_PAD_PTD4__DEBUG_OUT21		0x14C 0x000 ALT7 0x0
+#define VF610_PAD_PTD5__GPIO_84			0x150 0x000 ALT0 0x0
+#define VF610_PAD_PTD5__QSPI0_A_DATA0		0x150 0x000 ALT1 0x0
+#define VF610_PAD_PTD5__DSPI1_CS0		0x150 0x300 ALT3 0x1
+#define VF610_PAD_PTD5__FB_AD10			0x150 0x000 ALT4 0x0
+#define VF610_PAD_PTD5__DEBUG_OUT22		0x150 0x000 ALT7 0x0
+#define VF610_PAD_PTD6__GPIO_85			0x154 0x000 ALT0 0x0
+#define VF610_PAD_PTD6__QSPI1_A_DQS		0x154 0x000 ALT1 0x0
+#define VF610_PAD_PTD6__DSPI1_SIN		0x154 0x2FC ALT3 0x1
+#define VF610_PAD_PTD6__FB_AD9			0x154 0x000 ALT4 0x0
+#define VF610_PAD_PTD6__DEBUG_OUT23		0x154 0x000 ALT7 0x0
+#define VF610_PAD_PTD7__GPIO_86			0x158 0x000 ALT0 0x0
+#define VF610_PAD_PTD7__QSPI0_B_QSCK		0x158 0x000 ALT1 0x0
+#define VF610_PAD_PTD7__DSPI1_SOUT		0x158 0x000 ALT3 0x0
+#define VF610_PAD_PTD7__FB_AD8			0x158 0x000 ALT4 0x0
+#define VF610_PAD_PTD7__DEBUG_OUT24		0x158 0x000 ALT7 0x0
+#define VF610_PAD_PTD8__GPIO_87			0x15C 0x000 ALT0 0x0
+#define VF610_PAD_PTD8__QSPI0_B_CS0		0x15C 0x000 ALT1 0x0
+#define VF610_PAD_PTD8__FB_CLKOUT		0x15C 0x000 ALT2 0x0
+#define VF610_PAD_PTD8__DSPI1_SCK		0x15C 0x2F8 ALT3 0x1
+#define VF610_PAD_PTD8__FB_AD7			0x15C 0x000 ALT4 0x0
+#define VF610_PAD_PTD8__DEBUG_OUT25		0x15C 0x000 ALT7 0x0
+#define VF610_PAD_PTD9__GPIO_88			0x160 0x000 ALT0 0x0
+#define VF610_PAD_PTD9__QSPI0_B_DATA3		0x160 0x000 ALT1 0x0
+#define VF610_PAD_PTD9__DSPI3_CS1		0x160 0x000 ALT2 0x0
+#define VF610_PAD_PTD9__FB_AD6			0x160 0x000 ALT4 0x0
+#define VF610_PAD_PTD9__SAI1_TX_SYNC		0x160 0x360 ALT6 0x0
+#define VF610_PAD_PTD9__DCU1_B0			0x160 0x000 ALT7 0x0
+#define VF610_PAD_PTD10__GPIO_89		0x164 0x000 ALT0 0x0
+#define VF610_PAD_PTD10__QSPI0_B_DATA2		0x164 0x000 ALT1 0x0
+#define VF610_PAD_PTD10__DSPI3_CS0		0x164 0x000 ALT2 0x0
+#define VF610_PAD_PTD10__FB_AD5			0x164 0x000 ALT4 0x0
+#define VF610_PAD_PTD10__DCU1_B1		0x164 0x000 ALT7 0x0
+#define VF610_PAD_PTD11__GPIO_90		0x168 0x000 ALT0 0x0
+#define VF610_PAD_PTD11__QSPI0_B_DATA1		0x168 0x000 ALT1 0x0
+#define VF610_PAD_PTD11__DSPI3_SIN		0x168 0x000 ALT2 0x0
+#define VF610_PAD_PTD11__FB_AD4			0x168 0x000 ALT4 0x0
+#define VF610_PAD_PTD11__DEBUG_OUT26		0x168 0x000 ALT7 0x0
+#define VF610_PAD_PTD12__GPIO_91		0x16C 0x000 ALT0 0x0
+#define VF610_PAD_PTD12__QSPI0_B_DATA0		0x16C 0x000 ALT1 0x0
+#define VF610_PAD_PTD12__DSPI3_SOUT		0x16C 0x000 ALT2 0x0
+#define VF610_PAD_PTD12__FB_AD3			0x16C 0x000 ALT4 0x0
+#define VF610_PAD_PTD12__DEBUG_OUT27		0x16C 0x000 ALT7 0x0
+#define VF610_PAD_PTD13__GPIO_92		0x170 0x000 ALT0 0x0
+#define VF610_PAD_PTD13__QSPI0_B_DQS		0x170 0x000 ALT1 0x0
+#define VF610_PAD_PTD13__DSPI3_SCK		0x170 0x000 ALT2 0x0
+#define VF610_PAD_PTD13__FB_AD2			0x170 0x000 ALT4 0x0
+#define VF610_PAD_PTD13__DEBUG_OUT28		0x170 0x000 ALT7 0x0
+#define VF610_PAD_PTB23__GPIO_93		0x174 0x000 ALT0 0x0
+#define VF610_PAD_PTB23__SAI0_TX_BCLK		0x174 0x000 ALT1 0x0
+#define VF610_PAD_PTB23__UART1_TX		0x174 0x380 ALT2 0x2
+#define VF610_PAD_PTB23__SRC_RCON18		0x174 0x398 ALT3 0x1
+#define VF610_PAD_PTB23__FB_MUXED_ALE		0x174 0x000 ALT4 0x0
+#define VF610_PAD_PTB23__FB_TS_B		0x174 0x000 ALT5 0x0
+#define VF610_PAD_PTB23__UART3_RTS		0x174 0x000 ALT6 0x0
+#define VF610_PAD_PTB23__DCU1_G3		0x174 0x000 ALT7 0x0
+#define VF610_PAD_PTB24__GPIO_94		0x178 0x000 ALT0 0x0
+#define VF610_PAD_PTB24__SAI0_RX_BCLK		0x178 0x000 ALT1 0x0
+#define VF610_PAD_PTB24__UART1_RX		0x178 0x37C ALT2 0x2
+#define VF610_PAD_PTB24__SRC_RCON19		0x178 0x39C ALT3 0x1
+#define VF610_PAD_PTB24__FB_MUXED_TSIZ0		0x178 0x000 ALT4 0x0
+#define VF610_PAD_PTB24__NF_WE_B		0x178 0x000 ALT5 0x0
+#define VF610_PAD_PTB24__UART3_CTS		0x178 0x000 ALT6 0x0
+#define VF610_PAD_PTB24__DCU1_G4		0x178 0x000 ALT7 0x0
+#define VF610_PAD_PTB25__GPIO_95		0x17C 0x000 ALT0 0x0
+#define VF610_PAD_PTB25__SAI0_RX_DATA		0x17C 0x000 ALT1 0x0
+#define VF610_PAD_PTB25__UART1_RTS		0x17C 0x000 ALT2 0x0
+#define VF610_PAD_PTB25__SRC_RCON20		0x17C 0x3A0 ALT3 0x1
+#define VF610_PAD_PTB25__FB_CS1_B		0x17C 0x000 ALT4 0x0
+#define VF610_PAD_PTB25__NF_CE0_B		0x17C 0x000 ALT5 0x0
+#define VF610_PAD_PTB25__DCU1_G5		0x17C 0x000 ALT7 0x0
+#define VF610_PAD_PTB26__GPIO_96		0x180 0x000 ALT0 0x0
+#define VF610_PAD_PTB26__SAI0_TX_DATA		0x180 0x000 ALT1 0x0
+#define VF610_PAD_PTB26__UART1_CTS		0x180 0x378 ALT2 0x2
+#define VF610_PAD_PTB26__SRC_RCON21		0x180 0x000 ALT3 0x0
+#define VF610_PAD_PTB26__FB_CS0_B		0x180 0x000 ALT4 0x0
+#define VF610_PAD_PTB26__NF_CE1_B		0x180 0x000 ALT5 0x0
+#define VF610_PAD_PTB26__DCU1_G6		0x180 0x000 ALT7 0x0
+#define VF610_PAD_PTB27__GPIO_97		0x184 0x000 ALT0 0x0
+#define VF610_PAD_PTB27__SAI0_RX_SYNC		0x184 0x000 ALT1 0x0
+#define VF610_PAD_PTB27__SRC_RCON22		0x184 0x000 ALT3 0x0
+#define VF610_PAD_PTB27__FB_OE_B		0x184 0x000 ALT4 0x0
+#define VF610_PAD_PTB27__FB_MUXED_TBST_B	0x184 0x000 ALT5 0x0
+#define VF610_PAD_PTB27__NF_RE_B		0x184 0x000 ALT6 0x0
+#define VF610_PAD_PTB27__DCU1_G7		0x184 0x000 ALT7 0x0
+#define VF610_PAD_PTB28__GPIO_98		0x188 0x000 ALT0 0x0
+#define VF610_PAD_PTB28__SAI0_TX_SYNC		0x188 0x000 ALT1 0x0
+#define VF610_PAD_PTB28__SRC_RCON23		0x188 0x000 ALT3 0x0
+#define VF610_PAD_PTB28__FB_RW_B		0x188 0x000 ALT4 0x0
+#define VF610_PAD_PTB28__DCU1_B6		0x188 0x000 ALT7 0x0
+#define VF610_PAD_PTC26__GPIO_99		0x18C 0x000 ALT0 0x0
+#define VF610_PAD_PTC26__SAI1_TX_BCLK		0x18C 0x000 ALT1 0x0
+#define VF610_PAD_PTC26__DSPI0_CS5		0x18C 0x000 ALT2 0x0
+#define VF610_PAD_PTC26__SRC_RCON24		0x18C 0x000 ALT3 0x0
+#define VF610_PAD_PTC26__FB_TA_B		0x18C 0x000 ALT4 0x0
+#define VF610_PAD_PTC26__NF_RB_B		0x18C 0x000 ALT5 0x0
+#define VF610_PAD_PTC26__DCU1_B7		0x18C 0x000 ALT7 0x0
+#define VF610_PAD_PTC27__GPIO_100		0x190 0x000 ALT0 0x0
+#define VF610_PAD_PTC27__SAI1_RX_BCLK		0x190 0x000 ALT1 0x0
+#define VF610_PAD_PTC27__DSPI0_CS4		0x190 0x000 ALT2 0x0
+#define VF610_PAD_PTC27__SRC_RCON25		0x190 0x000 ALT3 0x0
+#define VF610_PAD_PTC27__FB_BE3_B		0x190 0x000 ALT4 0x0
+#define VF610_PAD_PTC27__FB_CS3_B		0x190 0x000 ALT5 0x0
+#define VF610_PAD_PTC27__NF_ALE			0x190 0x000 ALT6 0x0
+#define VF610_PAD_PTC27__DCU1_B2		0x190 0x000 ALT7 0x0
+#define VF610_PAD_PTC28__GPIO_101		0x194 0x000 ALT0 0x0
+#define VF610_PAD_PTC28__SAI1_RX_DATA		0x194 0x000 ALT1 0x0
+#define VF610_PAD_PTC28__DSPI0_CS3		0x194 0x000 ALT2 0x0
+#define VF610_PAD_PTC28__SRC_RCON26		0x194 0x000 ALT3 0x0
+#define VF610_PAD_PTC28__FB_BE2_B		0x194 0x000 ALT4 0x0
+#define VF610_PAD_PTC28__FB_CS2_B		0x194 0x000 ALT5 0x0
+#define VF610_PAD_PTC28__NF_CLE			0x194 0x000 ALT6 0x0
+#define VF610_PAD_PTC28__DCU1_B3		0x194 0x000 ALT7 0x0
+#define VF610_PAD_PTC29__GPIO_102		0x198 0x000 ALT0 0x0
+#define VF610_PAD_PTC29__SAI1_TX_DATA		0x198 0x000 ALT1 0x0
+#define VF610_PAD_PTC29__DSPI0_CS2		0x198 0x000 ALT2 0x0
+#define VF610_PAD_PTC29__SRC_RCON27		0x198 0x000 ALT3 0x0
+#define VF610_PAD_PTC29__FB_BE1_B		0x198 0x000 ALT4 0x0
+#define VF610_PAD_PTC29__FB_MUXED_TSIZE1	0x198 0x000 ALT5 0x0
+#define VF610_PAD_PTC29__DCU1_B4		0x198 0x000 ALT7 0x0
+#define VF610_PAD_PTC30__GPIO_103		0x19C 0x000 ALT0 0x0
+#define VF610_PAD_PTC30__SAI1_RX_SYNC		0x19C 0x000 ALT1 0x0
+#define VF610_PAD_PTC30__DSPI1_CS2		0x19C 0x000 ALT2 0x0
+#define VF610_PAD_PTC30__SRC_RCON28		0x19C 0x000 ALT3 0x0
+#define VF610_PAD_PTC30__FB_MUXED_BE0_B		0x19C 0x000 ALT4 0x0
+#define VF610_PAD_PTC30__FB_TSIZ0		0x19C 0x000 ALT5 0x0
+#define VF610_PAD_PTC30__ADC0_SE5		0x19C 0x000 ALT6 0x0
+#define VF610_PAD_PTC30__DCU1_B5		0x19C 0x000 ALT7 0x0
+#define VF610_PAD_PTC31__GPIO_104		0x1A0 0x000 ALT0 0x0
+#define VF610_PAD_PTC31__SAI1_TX_SYNC		0x1A0 0x360 ALT1 0x1
+#define VF610_PAD_PTC31__SRC_RCON29		0x1A0 0x000 ALT3 0x0
+#define VF610_PAD_PTC31__ADC1_SE5		0x1A0 0x000 ALT6 0x0
+#define VF610_PAD_PTC31__DCU1_B6		0x1A0 0x000 ALT7 0x0
+#define VF610_PAD_PTE0__GPIO_105		0x1A4 0x000 ALT0 0x0
+#define VF610_PAD_PTE0__DCU0_HSYNC		0x1A4 0x000 ALT1 0x0
+#define VF610_PAD_PTE0__SRC_BMODE1		0x1A4 0x000 ALT2 0x0
+#define VF610_PAD_PTE0__LCD0			0x1A4 0x000 ALT4 0x0
+#define VF610_PAD_PTE0__DEBUG_OUT29		0x1A4 0x000 ALT7 0x0
+#define VF610_PAD_PTE1__GPIO_106		0x1A8 0x000 ALT0 0x0
+#define VF610_PAD_PTE1__DCU0_VSYNC		0x1A8 0x000 ALT1 0x0
+#define VF610_PAD_PTE1__SRC_BMODE0		0x1A8 0x000 ALT2 0x0
+#define VF610_PAD_PTE1__LCD1			0x1A8 0x000 ALT4 0x0
+#define VF610_PAD_PTE1__DEBUG_OUT30		0x1A8 0x000 ALT7 0x0
+#define VF610_PAD_PTE2__GPIO_107		0x1AC 0x000 ALT0 0x0
+#define VF610_PAD_PTE2__DCU0_PCLK		0x1AC 0x000 ALT1 0x0
+#define VF610_PAD_PTE2__LCD2			0x1AC 0x000 ALT4 0x0
+#define VF610_PAD_PTE2__DEBUG_OUT31		0x1AC 0x000 ALT7 0x0
+#define VF610_PAD_PTE3__GPIO_108		0x1B0 0x000 ALT0 0x0
+#define VF610_PAD_PTE3__DCU0_TAG		0x1B0 0x000 ALT1 0x0
+#define VF610_PAD_PTE3__LCD3			0x1B0 0x000 ALT4 0x0
+#define VF610_PAD_PTE3__DEBUG_OUT32		0x1B0 0x000 ALT7 0x0
+#define VF610_PAD_PTE4__GPIO_109		0x1B4 0x000 ALT0 0x0
+#define VF610_PAD_PTE4__DCU0_DE			0x1B4 0x000 ALT1 0x0
+#define VF610_PAD_PTE4__LCD4			0x1B4 0x000 ALT4 0x0
+#define VF610_PAD_PTE4__DEBUG_OUT33		0x1B4 0x000 ALT7 0x0
+#define VF610_PAD_PTE5__GPIO_110		0x1B8 0x000 ALT0 0x0
+#define VF610_PAD_PTE5__DCU0_R0			0x1B8 0x000 ALT1 0x0
+#define VF610_PAD_PTE5__LCD5			0x1B8 0x000 ALT4 0x0
+#define VF610_PAD_PTE5__DEBUG_OUT34		0x1B8 0x000 ALT7 0x0
+#define VF610_PAD_PTE6__GPIO_111		0x1BC 0x000 ALT0 0x0
+#define VF610_PAD_PTE6__DCU0_R1			0x1BC 0x000 ALT1 0x0
+#define VF610_PAD_PTE6__LCD6			0x1BC 0x000 ALT4 0x0
+#define VF610_PAD_PTE6__DEBUG_OUT35		0x1BC 0x000 ALT7 0x0
+#define VF610_PAD_PTE7__GPIO_112		0x1C0 0x000 ALT0 0x0
+#define VF610_PAD_PTE7__DCU0_R2			0x1C0 0x000 ALT1 0x0
+#define VF610_PAD_PTE7__SRC_RCON0		0x1C0 0x000 ALT3 0x0
+#define VF610_PAD_PTE7__LCD7			0x1C0 0x000 ALT4 0x0
+#define VF610_PAD_PTE7__DEBUG_OUT36		0x1C0 0x000 ALT7 0x0
+#define VF610_PAD_PTE8__GPIO_113		0x1C4 0x000 ALT0 0x0
+#define VF610_PAD_PTE8__DCU0_R3			0x1C4 0x000 ALT1 0x0
+#define VF610_PAD_PTE8__SRC_RCON1		0x1C4 0x000 ALT3 0x0
+#define VF610_PAD_PTE8__LCD8			0x1C4 0x000 ALT4 0x0
+#define VF610_PAD_PTE8__DEBUG_OUT37		0x1C4 0x000 ALT7 0x0
+#define VF610_PAD_PTE9__GPIO_114		0x1C8 0x000 ALT0 0x0
+#define VF610_PAD_PTE9__DCU0_R4			0x1C8 0x000 ALT1 0x0
+#define VF610_PAD_PTE9__SRC_RCON2		0x1C8 0x000 ALT3 0x0
+#define VF610_PAD_PTE9__LCD9			0x1C8 0x000 ALT4 0x0
+#define VF610_PAD_PTE9__DEBUG_OUT38		0x1C8 0x000 ALT7 0x0
+#define VF610_PAD_PTE10__GPIO_115		0x1CC 0x000 ALT0 0x0
+#define VF610_PAD_PTE10__DCU0_R5		0x1CC 0x000 ALT1 0x0
+#define VF610_PAD_PTE10__SRC_RCON3		0x1CC 0x000 ALT3 0x0
+#define VF610_PAD_PTE10__LCD10			0x1CC 0x000 ALT4 0x0
+#define VF610_PAD_PTE10__DEBUG_OUT39		0x1CC 0x000 ALT7 0x0
+#define VF610_PAD_PTE11__GPIO_116		0x1D0 0x000 ALT0 0x0
+#define VF610_PAD_PTE11__DCU0_R6		0x1D0 0x000 ALT1 0x0
+#define VF610_PAD_PTE11__SRC_RCON4		0x1D0 0x000 ALT3 0x0
+#define VF610_PAD_PTE11__LCD11			0x1D0 0x000 ALT4 0x0
+#define VF610_PAD_PTE11__DEBUG_OUT40		0x1D0 0x000 ALT7 0x0
+#define VF610_PAD_PTE12__GPIO_117		0x1D4 0x000 ALT0 0x0
+#define VF610_PAD_PTE12__DCU0_R7		0x1D4 0x000 ALT1 0x0
+#define VF610_PAD_PTE12__DSPI1_CS3		0x1D4 0x000 ALT2 0x0
+#define VF610_PAD_PTE12__SRC_RCON5		0x1D4 0x000 ALT3 0x0
+#define VF610_PAD_PTE12__LCD12			0x1D4 0x000 ALT4 0x0
+#define VF610_PAD_PTE12__LPT_ALT0		0x1D4 0x000 ALT7 0x0
+#define VF610_PAD_PTE13__GPIO_118		0x1D8 0x000 ALT0 0x0
+#define VF610_PAD_PTE13__DCU0_G0		0x1D8 0x000 ALT1 0x0
+#define VF610_PAD_PTE13__LCD13			0x1D8 0x000 ALT4 0x0
+#define VF610_PAD_PTE13__DEBUG_OUT41		0x1D8 0x000 ALT7 0x0
+#define VF610_PAD_PTE14__GPIO_119		0x1DC 0x000 ALT0 0x0
+#define VF610_PAD_PTE14__DCU0_G1		0x1DC 0x000 ALT1 0x0
+#define VF610_PAD_PTE14__LCD14			0x1DC 0x000 ALT4 0x0
+#define VF610_PAD_PTE14__DEBUG_OUT42		0x1DC 0x000 ALT7 0x0
+#define VF610_PAD_PTE15__GPIO_120		0x1E0 0x000 ALT0 0x0
+#define VF610_PAD_PTE15__DCU0_G2		0x1E0 0x000 ALT1 0x0
+#define VF610_PAD_PTE15__SRC_RCON6		0x1E0 0x000 ALT3 0x0
+#define VF610_PAD_PTE15__LCD15			0x1E0 0x000 ALT4 0x0
+#define VF610_PAD_PTE15__DEBUG_OUT43		0x1E0 0x000 ALT7 0x0
+#define VF610_PAD_PTE16__GPIO_121		0x1E4 0x000 ALT0 0x0
+#define VF610_PAD_PTE16__DCU0_G3		0x1E4 0x000 ALT1 0x0
+#define VF610_PAD_PTE16__SRC_RCON7		0x1E4 0x000 ALT3 0x0
+#define VF610_PAD_PTE16__LCD16			0x1E4 0x000 ALT4 0x0
+#define VF610_PAD_PTE17__GPIO_122		0x1E8 0x000 ALT0 0x0
+#define VF610_PAD_PTE17__DCU0_G4		0x1E8 0x000 ALT1 0x0
+#define VF610_PAD_PTE17__SRC_RCON8		0x1E8 0x000 ALT3 0x0
+#define VF610_PAD_PTE17__LCD17			0x1E8 0x000 ALT4 0x0
+#define VF610_PAD_PTE18__GPIO_123		0x1EC 0x000 ALT0 0x0
+#define VF610_PAD_PTE18__DCU0_G5		0x1EC 0x000 ALT1 0x0
+#define VF610_PAD_PTE18__SRC_RCON9		0x1EC 0x000 ALT3 0x0
+#define VF610_PAD_PTE18__LCD18			0x1EC 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__GPIO_124		0x1F0 0x000 ALT0 0x0
+#define VF610_PAD_PTE19__DCU0_G6		0x1F0 0x000 ALT1 0x0
+#define VF610_PAD_PTE19__SRC_RCON10		0x1F0 0x000 ALT3 0x0
+#define VF610_PAD_PTE19__LCD19			0x1F0 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__I2C0_SCL		0x1F0 0x33C ALT5 0x3
+#define VF610_PAD_PTE20__GPIO_125		0x1F4 0x000 ALT0 0x0
+#define VF610_PAD_PTE20__DCU0_G7		0x1F4 0x000 ALT1 0x0
+#define VF610_PAD_PTE20__SRC_RCON11		0x1F4 0x000 ALT3 0x0
+#define VF610_PAD_PTE20__LCD20			0x1F4 0x000 ALT4 0x0
+#define VF610_PAD_PTE20__I2C0_SDA		0x1F4 0x340 ALT5 0x3
+#define VF610_PAD_PTE20__EWM_IN			0x1F4 0x000 ALT7 0x0
+#define VF610_PAD_PTE21__GPIO_126		0x1F8 0x000 ALT0 0x0
+#define VF610_PAD_PTE21__DCU0_B0		0x1F8 0x000 ALT1 0x0
+#define VF610_PAD_PTE21__LCD21			0x1F8 0x000 ALT4 0x0
+#define VF610_PAD_PTE22__GPIO_127		0x1FC 0x000 ALT0 0x0
+#define VF610_PAD_PTE22__DCU0_B1		0x1FC 0x000 ALT1 0x0
+#define VF610_PAD_PTE22__LCD22			0x1FC 0x000 ALT4 0x0
+#define VF610_PAD_PTE23__GPIO_128		0x200 0x000 ALT0 0x0
+#define VF610_PAD_PTE23__DCU0_B2		0x200 0x000 ALT1 0x0
+#define VF610_PAD_PTE23__SRC_RCON12		0x200 0x000 ALT3 0x0
+#define VF610_PAD_PTE23__LCD23			0x200 0x000 ALT4 0x0
+#define VF610_PAD_PTE24__GPIO_129		0x204 0x000 ALT0 0x0
+#define VF610_PAD_PTE24__DCU0_B3		0x204 0x000 ALT1 0x0
+#define VF610_PAD_PTE24__SRC_RCON13		0x204 0x000 ALT3 0x0
+#define VF610_PAD_PTE24__LCD24			0x204 0x000 ALT4 0x0
+#define VF610_PAD_PTE25__GPIO_130		0x208 0x000 ALT0 0x0
+#define VF610_PAD_PTE25__DCU0_B4		0x208 0x000 ALT1 0x0
+#define VF610_PAD_PTE25__SRC_RCON14		0x208 0x000 ALT3 0x0
+#define VF610_PAD_PTE25__LCD25			0x208 0x000 ALT4 0x0
+#define VF610_PAD_PTE26__GPIO_131		0x20C 0x000 ALT0 0x0
+#define VF610_PAD_PTE26__DCU0_B5		0x20C 0x000 ALT1 0x0
+#define VF610_PAD_PTE26__SRC_RCON15		0x20C 0x000 ALT3 0x0
+#define VF610_PAD_PTE26__LCD26			0x20C 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__GPIO_132		0x210 0x000 ALT0 0x0
+#define VF610_PAD_PTE27__DCU0_B6		0x210 0x000 ALT1 0x0
+#define VF610_PAD_PTE27__SRC_RCON16		0x210 0x000 ALT3 0x0
+#define VF610_PAD_PTE27__LCD27			0x210 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__I2C1_SCL		0x210 0x344 ALT5 0x3
+#define VF610_PAD_PTE28__GPIO_133		0x214 0x000 ALT0 0x0
+#define VF610_PAD_PTE28__DCU0_B7		0x214 0x000 ALT1 0x0
+#define VF610_PAD_PTE28__SRC_RCON17		0x214 0x000 ALT3 0x0
+#define VF610_PAD_PTE28__LCD28			0x214 0x000 ALT4 0x0
+#define VF610_PAD_PTE28__I2C1_SDA		0x214 0x348 ALT5 0x3
+#define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
+#define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
+#define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
+
+#define VF610_PAD_DDR_RESETB			0x21c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A15__DDR_A_15		0x220 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A14__DDR_A_14		0x224 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A13__DDR_A_13		0x228 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A12__DDR_A_12		0x22c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A11__DDR_A_11		0x230 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A10__DDR_A_10		0x234 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A9__DDR_A_9		0x238 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A8__DDR_A_8		0x23c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A7__DDR_A_7		0x240 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A6__DDR_A_6		0x244 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A5__DDR_A_5		0x248 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A4__DDR_A_4		0x24c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A3__DDR_A_3		0x250 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A2__DDR_A_2		0x254 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A1__DDR_A_1		0x258 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A0__DDR_A_0		0x25c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA2__DDR_BA_2		0x260 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA1__DDR_BA_1		0x264 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA0__DDR_BA_0		0x268 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CAS__DDR_CAS_B		0x26c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CKE__DDR_CKE_0		0x270 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CLK__DDR_CLK_0		0x274 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CS__DDR_CS_B_0		0x278 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D15__DDR_D_15		0x27c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D14__DDR_D_14		0x280 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D13__DDR_D_13		0x284 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D12__DDR_D_12		0x288 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D11__DDR_D_11		0x28c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D10__DDR_D_10		0x290 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D9__DDR_D_9		0x294 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D8__DDR_D_8		0x298 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D7__DDR_D_7		0x29c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D6__DDR_D_6		0x2a0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D5__DDR_D_5		0x2a4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D4__DDR_D_4		0x2a8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D3__DDR_D_3		0x2ac 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D2__DDR_D_2		0x2b0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D1__DDR_D_1		0x2b4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D0__DDR_D_0		0x2b8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1		0x2bc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0		0x2c0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1		0x2c4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0		0x2c8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_RAS__DDR_RAS_B		0x2cc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_WE__DDR_WE_B		0x2d0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0		0x2d4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1		0x2d8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1	0x2dc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2	0x2e0 0x000 ALT0 0x0
+#endif
diff --git a/roms/u-boot/arch/arm/dts/vf610-twr.dts b/roms/u-boot/arch/arm/dts/vf610-twr.dts
new file mode 100644
index 000000000..62e9f438b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/vf610-twr.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2016 Toradex AG
+ */
+
+/dts-v1/;
+#include "vf.dtsi"
+
+/ {
+	model = "VF610 Tower Board";
+	compatible = "fsl,vf610-twr", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-7000.dtsi b/roms/u-boot/arch/arm/dts/zynq-7000.dtsi
new file mode 100644
index 000000000..c35eb2344
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-7000.dtsi
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx Zynq 7000 DTSI
+ * Describes the hardware common to all Zynq 7000-based boards.
+ *
+ *  Copyright (C) 2011 - 2015 Xilinx
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,zynq-7000";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clkc 3>;
+			clock-latency = <1000>;
+			cpu0-supply = <&regulator_vccpint>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clkc 3>;
+		};
+	};
+
+	fpga_full: fpga-full {
+		compatible = "fpga-region";
+		fpga-mgr = <&devcfg>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
+	pmu@f8891000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 5 4>, <0 6 4>;
+		interrupt-parent = <&intc>;
+		reg = <0xf8891000 0x1000>,
+		      <0xf8893000 0x1000>;
+	};
+
+	regulator_vccpint: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCPINT";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+		clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+		clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+		};
+		in-ports {
+			/* replicator input port */
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port>;
+				};
+			};
+		};
+	};
+
+	amba: amba {
+		u-boot,dm-pre-reloc;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		adc: adc@f8007100 {
+			compatible = "xlnx,zynq-xadc-1.00.a";
+			reg = <0xf8007100 0x20>;
+			interrupts = <0 7 4>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 12>;
+		};
+
+		can0: can@e0008000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 19>, <&clkc 36>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0008000 0x1000>;
+			interrupts = <0 28 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		can1: can@e0009000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 20>, <&clkc 37>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0009000 0x1000>;
+			interrupts = <0 51 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		gpio0: gpio@e000a000 {
+			compatible = "xlnx,zynq-gpio-1.0";
+			#gpio-cells = <2>;
+			clocks = <&clkc 42>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 20 4>;
+			reg = <0xe000a000 0x1000>;
+		};
+
+		i2c0: i2c@e0004000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 38>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 25 4>;
+			reg = <0xe0004000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@e0005000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 39>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 48 4>;
+			reg = <0xe0005000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
+		};
+
+		L2: cache-controller@f8f02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xF8F02000 0x1000>;
+			interrupts = <0 2 4>;
+			arm,data-latency = <3 2 2>;
+			arm,tag-latency = <2 2 2>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		mc: memory-controller@f8006000 {
+			compatible = "xlnx,zynq-ddrc-a05";
+			reg = <0xf8006000 0x1000>;
+		};
+
+		uart0: serial@e0000000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			status = "disabled";
+			clocks = <&clkc 23>, <&clkc 40>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0xE0000000 0x1000>;
+			interrupts = <0 27 4>;
+		};
+
+		uart1: serial@e0001000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			status = "disabled";
+			clocks = <&clkc 24>, <&clkc 41>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0xE0001000 0x1000>;
+			interrupts = <0 50 4>;
+		};
+
+		spi0: spi@e0006000 {
+			compatible = "xlnx,zynq-spi-r1p6";
+			reg = <0xe0006000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 26 4>;
+			clocks = <&clkc 25>, <&clkc 34>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@e0007000 {
+			compatible = "xlnx,zynq-spi-r1p6";
+			reg = <0xe0007000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 49 4>;
+			clocks = <&clkc 26>, <&clkc 35>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		qspi: spi@e000d000 {
+			clock-names = "ref_clk", "pclk";
+			clocks = <&clkc 10>, <&clkc 43>;
+			compatible = "xlnx,zynq-qspi-1.0";
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 19 4>;
+			reg = <0xe000d000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		smcc: memory-controller@e000e000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			clock-names = "memclk", "apb_pclk";
+			clocks = <&clkc 11>, <&clkc 44>;
+			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+			interrupt-parent = <&intc>;
+			interrupts = <0 18 4>;
+			ranges ;
+			reg = <0xe000e000 0x1000>;
+			nand0: flash@e1000000 {
+				status = "disabled";
+				compatible = "arm,pl353-nand-r2p1";
+				reg = <0xe1000000 0x1000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+			nor0: flash@e2000000 {
+				status = "disabled";
+				compatible = "cfi-flash";
+				reg = <0xe2000000 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		gem0: ethernet@e000b000 {
+			compatible = "cdns,zynq-gem", "cdns,gem";
+			reg = <0xe000b000 0x1000>;
+			status = "disabled";
+			interrupts = <0 22 4>;
+			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gem1: ethernet@e000c000 {
+			compatible = "cdns,zynq-gem", "cdns,gem";
+			reg = <0xe000c000 0x1000>;
+			status = "disabled";
+			interrupts = <0 45 4>;
+			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sdhci0: mmc@e0100000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 21>, <&clkc 32>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 24 4>;
+			reg = <0xe0100000 0x1000>;
+		};
+
+		sdhci1: mmc@e0101000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 22>, <&clkc 33>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 47 4>;
+			reg = <0xe0101000 0x1000>;
+		};
+
+		slcr: slcr@f8000000 {
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
+			reg = <0xF8000000 0x1000>;
+			ranges;
+			clkc: clkc@100 {
+				u-boot,dm-pre-reloc;
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				fclk-enable = <0>;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
+			};
+
+			rstc: rstc@200 {
+				compatible = "xlnx,zynq-reset";
+				reg = <0x200 0x48>;
+				#reset-cells = <1>;
+				syscon = <&slcr>;
+			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
+		};
+
+		dmac_s: dmac@f8003000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xf8003000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+				"dma4", "dma5", "dma6", "dma7";
+			interrupts = <0 13 4>,
+			             <0 14 4>, <0 15 4>,
+			             <0 16 4>, <0 17 4>,
+			             <0 40 4>, <0 41 4>,
+			             <0 42 4>, <0 43 4>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <4>;
+			clocks = <&clkc 27>;
+			clock-names = "apb_pclk";
+		};
+
+		devcfg: devcfg@f8007000 {
+			compatible = "xlnx,zynq-devcfg-1.0";
+			interrupt-parent = <&intc>;
+			interrupts = <0 8 4>;
+			reg = <0xf8007000 0x100>;
+			clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
+			clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
+			syscon = <&slcr>;
+		};
+
+		efuse: efuse@f800d000 {
+			compatible = "xlnx,zynq-efuse";
+			reg = <0xf800d000 0x20>;
+		};
+
+		global_timer: timer@f8f00200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xf8f00200 0x20>;
+			interrupts = <1 11 0x301>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 4>;
+		};
+
+		ttc0: timer@f8001000 {
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8001000 0x1000>;
+		};
+
+		ttc1: timer@f8002000 {
+			interrupt-parent = <&intc>;
+			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8002000 0x1000>;
+		};
+
+		scutimer: timer@f8f00600 {
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0x301>;
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xf8f00600 0x20>;
+			clocks = <&clkc 4>;
+		};
+
+		usb0: usb@e0002000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 28>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 21 4>;
+			reg = <0xe0002000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@e0003000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 29>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 44 4>;
+			reg = <0xe0003000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		watchdog0: watchdog@f8005000 {
+			clocks = <&clkc 45>;
+			compatible = "cdns,wdt-r1p2";
+			interrupt-parent = <&intc>;
+			interrupts = <0 9 1>;
+			reg = <0xf8005000 0x1000>;
+			timeout-sec = <10>;
+		};
+
+		etb@f8801000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0xf8801000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		tpiu@f8803000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xf8803000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@f8804000 {
+			compatible = "arm,coresight-static-funnel", "arm,primecell";
+			reg = <0xf8804000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+			/* funnel output ports */
+			out-ports {
+				port {
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					funnel0_in_port0: endpoint {
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel0_in_port1: endpoint {
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel0_in_port2: endpoint {
+					};
+				};
+				/* The other input ports are not connect to anything */
+			};
+		};
+
+		ptm@f889c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889c000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port0>;
+					};
+				};
+			};
+		};
+
+		ptm@f889d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889d000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port1>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-cc108.dts b/roms/u-boot/arch/arm/dts/zynq-cc108.dts
new file mode 100644
index 000000000..64d73ecbc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-cc108.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CC108 board DTS
+ *
+ * (C) Copyright 2007-2018 Xilinx, Inc.
+ * (C) Copyright 2007-2013 Michal Simek
+ * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx CC108 board";
+	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart0;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <0>;
+	num-cs = <1>;
+	flash@0 { /* 16 MB */
+		compatible = "n25q128a11";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "qspi-fsbl-uboot-bs";
+			reg = <0x0 0x400000>; /* 4MB */
+		};
+		partition@400000 {
+			label = "qspi-linux";
+			reg = <0x400000 0x400000>; /* 4MB */
+		};
+		partition@800000 {
+			label = "qspi-rootfs";
+			reg = <0x800000 0x400000>; /* 4MB */
+		};
+		partition@c00000 {
+			label = "qspi-devicetree";
+			reg = <0xc00000 0x100000>; /* 1MB */
+		};
+		partition@d00000 {
+			label = "qspi-scratch";
+			reg = <0xd00000 0x200000>; /* 2MB */
+		};
+		partition@f00000 {
+			label = "qspi-uboot-env";
+			reg = <0xf00000 0x100000>; /* 1MB */
+		};
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	broken-cd ;
+	wp-inverted ;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-cse-nand.dts b/roms/u-boot/arch/arm/dts/zynq-cse-nand.dts
new file mode 100644
index 000000000..32cb3bffc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-cse-nand.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CSE NAND board DTS
+ *
+ * Copyright (C) 2018 Xilinx, Inc.
+ */
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Zynq CSE NAND Board";
+	compatible = "xlnx,zynq-cse-nand", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &dcc;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x400000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
+	amba: amba {
+		u-boot,dm-pre-reloc;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smcc: memory-controller@e000e000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-names = "memclk", "apb_pclk";
+			clocks = <&clkc 11>, <&clkc 44>;
+			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+			ranges;
+			reg = <0xe000e000 0x1000>;
+
+			nand0: flash@e1000000 {
+				compatible = "arm,pl353-nand-r2p1";
+				reg = <0xe1000000 0x1000000>;
+			};
+		};
+
+		slcr: slcr@f8000000 {
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+			reg = <0xF8000000 0x1000>;
+			ranges;
+			clkc: clkc@100 {
+				u-boot,dm-pre-reloc;
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				clock-output-names = "armpll", "ddrpll",
+						"iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x",
+						"ddr2x", "ddr3x", "dci",
+						"lqspi", "smc", "pcap", "gem0",
+						"gem1", "fclk0", "fclk1",
+						"fclk2", "fclk3", "can0",
+						"can1", "sdio0", "sdio1",
+						"uart0", "uart1", "spi0",
+						"spi1", "dma", "usb0_aper",
+						"usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper",
+						"sdio1_aper", "spi0_aper",
+						"spi1_aper", "can0_aper",
+						"can1_aper", "i2c0_aper",
+						"i2c1_aper", "uart0_aper",
+						"uart1_aper", "gpio_aper",
+						"lqspi_aper", "smc_aper",
+						"swdt", "dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
+			};
+		};
+	};
+};
+
+&dcc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-cse-nor.dts b/roms/u-boot/arch/arm/dts/zynq-cse-nor.dts
new file mode 100644
index 000000000..197fbd717
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-cse-nor.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CSE NOR board DTS
+ *
+ * Copyright (C) 2018 Xilinx, Inc.
+ */
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Zynq CSE NOR Board";
+	compatible = "xlnx,zynq-cse-nor", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &dcc;
+	};
+
+	memory@fffc0000 {
+		device_type = "memory";
+		reg = <0xFFFC0000 0x40000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
+	amba: amba {
+		u-boot,dm-pre-reloc;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		slcr: slcr@f8000000 {
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+			reg = <0xF8000000 0x1000>;
+			ranges;
+			clkc: clkc@100 {
+				u-boot,dm-pre-reloc;
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				clock-output-names = "armpll", "ddrpll",
+						"iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x",
+						"ddr2x", "ddr3x", "dci",
+						"lqspi", "smc", "pcap", "gem0",
+						"gem1", "fclk0", "fclk1",
+						"fclk2", "fclk3", "can0",
+						"can1", "sdio0", "sdio1",
+						"uart0", "uart1", "spi0",
+						"spi1", "dma", "usb0_aper",
+						"usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper",
+						"sdio1_aper", "spi0_aper",
+						"spi1_aper", "can0_aper",
+						"can1_aper", "i2c0_aper",
+						"i2c1_aper", "uart0_aper",
+						"uart1_aper", "gpio_aper",
+						"lqspi_aper", "smc_aper",
+						"swdt", "dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
+			};
+		};
+
+		/*
+		 * This is partially hack because it is normally subnode of smcc
+		 * but for mini U-Boot there is no reason to enable SMCC driver
+		 * which does almost nothing in NOR flash configuration that's
+		 * why place cfi-flash directly here.
+		 */
+		flash@e2000000 {
+			u-boot,dm-pre-reloc;
+			compatible = "cfi-flash";
+			reg = <0xe2000000 0x2000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&dcc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-cse-qspi-single.dts b/roms/u-boot/arch/arm/dts/zynq-cse-qspi-single.dts
new file mode 100644
index 000000000..ac6982a74
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-cse-qspi-single.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CSE QSPI single DTS
+ *
+ * Copyright (C) 2015 - 2017 Xilinx, Inc.
+ */
+
+#include "zynq-cse-qspi.dtsi"
+
+/ {
+	model = "Zynq CSE QSPI SINGLE Board";
+};
+
+&flash0 {
+	spi-rx-bus-width = <4>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-cse-qspi.dtsi b/roms/u-boot/arch/arm/dts/zynq-cse-qspi.dtsi
new file mode 100644
index 000000000..eb0e29e6c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-cse-qspi.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CSE QSPI board DTS
+ *
+ * Copyright (C) 2015 - 2017 Xilinx, Inc.
+ */
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Zynq CSE QSPI Board";
+	compatible = "xlnx,zynq-cse-qspi", "xlnx,zynq-7000";
+
+	aliases {
+		spi0 = &qspi;
+		serial0 = &dcc;
+	};
+
+	memory@fffc0000 {
+		device_type = "memory";
+		reg = <0xFFFC0000 0x40000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
+	amba: amba {
+		u-boot,dm-pre-reloc;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
+		};
+
+		qspi: spi@e000d000 {
+			clock-names = "ref_clk", "pclk";
+			clocks = <&clkc 10>, <&clkc 43>;
+			compatible = "xlnx,zynq-qspi-1.0";
+			status = "okay";
+			interrupt-parent = <&intc>;
+			interrupts = <0 19 4>;
+			reg = <0xe000d000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+			flash0: flash@0 {
+				compatible = "n25q128a11";
+				reg = <0x0>;
+				spi-tx-bus-width = <1>;
+				spi-rx-bus-width = <4>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partition@0 {
+					label = "qspi-fsbl-uboot";
+					reg = <0x0 0x100000>;
+				};
+				partition@100000 {
+					label = "qspi-linux";
+					reg = <0x100000 0x500000>;
+				};
+				partition@600000 {
+					label = "qspi-device-tree";
+					reg = <0x600000 0x20000>;
+				};
+				partition@620000 {
+					label = "qspi-rootfs";
+					reg = <0x620000 0x5E0000>;
+				};
+				partition@c00000 {
+					label = "qspi-bitstream";
+					reg = <0xC00000 0x400000>;
+				};
+			};
+		};
+
+		slcr: slcr@f8000000 {
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+			reg = <0xF8000000 0x1000>;
+			ranges;
+			clkc: clkc@100 {
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				fclk-enable = <0xf>;
+				u-boot,dm-pre-reloc;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
+			};
+		};
+	};
+
+};
+
+&dcc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-dlc20-rev1.0.dts b/roms/u-boot/arch/arm/dts/zynq-dlc20-rev1.0.dts
new file mode 100644
index 000000000..39ebcee9f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-dlc20-rev1.0.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq DLC20 Rev1.0";
+	compatible = "xlnx,zynq-dlc20-rev1.0", "xlnx,zynq-dlc20",
+		     "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0@e0002000 {
+		compatible = "ulpi-phy";
+		#phy-cells = <0>;
+		reg = <0xe0002000 0x1000>;
+		view-port = <0x0170>;
+		drv-vbus;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>; /* U7 */
+};
+
+&gem0 {
+	status = "okay"; /* MIO16-MIO27, MDIO MIO52/53 */
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 { /* rtl8211e - U25 */
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay"; /* MIO14/15 */
+	clock-frequency = <400000>;
+	/* U46 - m24c08 */
+	eeprom: eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+	};
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	is-dual = <0>;
+	num-cs = <1>;
+	spi-tx-bus-width = <4>;
+	spi-rx-bus-width = <4>;
+	flash@0 {
+		/* Rev1.0 W25Q128FWSIG, RevC N25Q128A */
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay"; /* EMMC MTFC4GACAJCN - MIO40-MIO45 */
+	non-removable;
+	bus-width = <4>;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay"; /* MIO8/9 */
+};
+
+&usb0 {
+	status = "okay"; /* MIO28-MIO39 */
+	dr_mode = "device";
+	usb-phy = <&usb_phy0>;
+};
+
+&watchdog0 {
+	reset-on-timeout;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-microzed.dts b/roms/u-boot/arch/arm/dts/zynq-microzed.dts
new file mode 100644
index 000000000..076639860
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-microzed.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx MicroZED board DTS
+ *
+ * Copyright (C) 2013 - 2016 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq MicroZED Board";
+	compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-minized.dts b/roms/u-boot/arch/arm/dts/zynq-minized.dts
new file mode 100644
index 000000000..525921ee7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-minized.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Avnet MiniZed board
+ *
+ * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ *
+ * Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
+ */
+
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Avnet Zynq MiniZed Development Board";
+	compatible = "avnet,minized", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <0>;
+	num-cs = <1>;
+	flash@0 {
+		compatible = "micron,m25p128";
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "boot";
+				reg = <0x0 0xff0000>;
+			};
+
+			partition@270000 {
+				label = "kernel";
+				reg = <0x270000 0xd80000>;
+			};
+
+			partition@ff0000 {
+				label = "bootenv";
+				reg = <0xff0000 0x10000>;
+			};
+
+			partition@1000000 {
+				label = "spare";
+				reg = <0x1000000 0x0>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	usb-reset = <&gpio0 7 0>; /* USB_RST_N-MIO7 */
+};
+
+&sdhci1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <12000000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+		broken-hpi;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-picozed.dts b/roms/u-boot/arch/arm/dts/zynq-picozed.dts
new file mode 100644
index 000000000..dea6a422c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-picozed.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Avnet PicoZed board DTS
+ *
+ * Copyright (C) 2015 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq PicoZed Board";
+	compatible = "xlnx,zynq-picozed", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdhci1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-syzygy-hub.dts b/roms/u-boot/arch/arm/dts/zynq-syzygy-hub.dts
new file mode 100644
index 000000000..55f8e8a2d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-syzygy-hub.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SYZYGY Hub DTS
+ *
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2017 Opal Kelly Inc.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "SYZYGY Hub";
+	compatible = "opalkelly,syzygy-hub", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart0;
+		mmc0 = &sdhci0;
+		i2c0 = &i2c1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = &eeprom;
+	};
+
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 47 1>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	eeprom: eeprom@57 {
+		compatible = "atmel,24c08"; /* not sure if this is correct */
+		reg = <0x57>;
+	};
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "otg";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-topic-miami.dts b/roms/u-boot/arch/arm/dts/zynq-topic-miami.dts
new file mode 100644
index 000000000..ab6bde95f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-topic-miami.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Topic Miami board DTS
+ *
+ * Copyright (C) 2014-2016 Topic Embedded Products
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Topic Miami Zynq Board";
+	compatible = "topic,miami", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart0;
+		spi0 = &qspi;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		usbotg0 = &usb0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	is-dual = <0>;
+	num-cs = <1>;
+	flash@0 {
+		compatible = "st,m25p80", "n25q256a";
+		m25p,fast-read;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <100000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "qspi-u-boot-spl";
+			reg = <0x00000 0x10000>;
+		};
+		partition@10000 {
+			label = "qspi-u-boot-img";
+			reg = <0x10000 0x60000>;
+		};
+		partition@70000 {
+			label = "qspi-device-tree";
+			reg = <0x70000 0x10000>;
+		};
+		partition@80000 {
+			label = "qspi-linux";
+			reg = <0x80000 0x400000>;
+		};
+		partition@480000 {
+			label = "qspi-rootfs";
+			reg = <0x480000 0x1b80000>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-topic-miamilite.dts b/roms/u-boot/arch/arm/dts/zynq-topic-miamilite.dts
new file mode 100644
index 000000000..366fd5bbb
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-topic-miamilite.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Topic Miami Lite board DTS
+ *
+ * Copyright (C) 2017 Topic Embedded Products
+ */
+#include "zynq-topic-miami.dts"
+
+/ {
+	model = "Topic Miami Lite Zynq Board";
+	compatible = "topic,miamilite", "xlnx,zynq-7000";
+};
+
+&qspi {
+	is-dual = <1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-topic-miamiplus.dts b/roms/u-boot/arch/arm/dts/zynq-topic-miamiplus.dts
new file mode 100644
index 000000000..df5388652
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-topic-miamiplus.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Topic Miami Plus board DTS
+ *
+ * Copyright (C) 2016 Topic Embedded Products
+ */
+#include "zynq-topic-miami.dts"
+
+/ {
+	model = "Topic Miami+ Zynq Board";
+	compatible = "topic,miamiplus", "xlnx,zynq-7000";
+};
+
+/* The miamiplus contains a speedgrade-2 device and runs at 800MHz */
+&cpu0 {
+	operating-points = <
+		/* kHz    uV */
+		800000  1000000
+		400000  1000000
+	>;
+};
+
+&qspi {
+	is-dual = <1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zc702.dts b/roms/u-boot/arch/arm/dts/zynq-zc702.dts
new file mode 100644
index 000000000..e45eba3d9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zc702.dts
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC702 board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+		usb0 = &usb0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		sw14 {
+			label = "sw14";
+			gpios = <&gpio0 12 0>;
+			linux,code = <108>; /* down */
+			wakeup-source;
+			autorepeat;
+		};
+		sw13 {
+			label = "sw13";
+			gpios = <&gpio0 14 0>;
+			linux,code = <103>; /* up */
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ds23 {
+			label = "ds23";
+			gpios = <&gpio0 10 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&amba {
+	ocm: sram@fffc0000 {
+		compatible = "mmio-sram";
+		reg = <0xfffc0000 0x10000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+	phy-reset-gpio = <&gpio0 11 0>;
+	phy-reset-active-low;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio0 50 0>;
+	sda-gpios = <&gpio0 51 0>;
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "right";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			hwmon@34 {
+				compatible = "ti,ucd9248";
+				reg = <0x34>;
+			};
+			hwmon@35 {
+				compatible = "ti,ucd9248";
+				reg = <0x35>;
+			};
+			hwmon@36 {
+				compatible = "ti,ucd9248";
+				reg = <0x36>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_50_grp", "gpio0_51_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_50_grp", "gpio0_51_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zc706.dts b/roms/u-boot/arch/arm/dts/zynq-zc706.dts
new file mode 100644
index 000000000..84729e9fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zc706.dts
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC706 board";
+	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "evenly";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			ucd90120@65 {
+				compatible = "ti,ucd90120";
+				reg = <0x65>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&watchdog0 {
+	reset-on-timeout;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zc770-xm010.dts b/roms/u-boot/arch/arm/dts/zynq-zc770-xm010.dts
new file mode 100644
index 000000000..c547d7921
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM010 board";
+	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		spi1 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&qspi {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	flash@1 {
+		compatible = "sst25wf080", "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "data";
+				reg = <0x0 0x100000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zc770-xm011-x16.dts b/roms/u-boot/arch/arm/dts/zynq-zc770-xm011-x16.dts
new file mode 100644
index 000000000..6ff8393d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zc770-xm011-x16.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM011 board DTS with NAND x16
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+#include "zynq-zc770-xm011.dts"
+
+/ {
+	model = "Xilinx ZC770 XM011 board (NAND x16)";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zc770-xm011.dts b/roms/u-boot/arch/arm/dts/zynq-zc770-xm011.dts
new file mode 100644
index 000000000..b6e3e255d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zc770-xm011.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM011 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM011 board";
+	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+
+	aliases {
+		i2c0 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&nand0 {
+	status = "okay";
+};
+
+&smcc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zc770-xm012.dts b/roms/u-boot/arch/arm/dts/zynq-zc770-xm012.dts
new file mode 100644
index 000000000..0d001c916
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zc770-xm012.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM012 board";
+	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom0: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom1: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zc770-xm013.dts b/roms/u-boot/arch/arm/dts/zynq-zc770-xm013.dts
new file mode 100644
index 000000000..bdf0c2f95
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zc770-xm013.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM013 board";
+	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem1;
+		i2c0 = &i2c1;
+		serial0 = &uart0;
+		spi0 = &qspi;
+		spi1 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	si570: clock-generator@55 {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x55>;
+		factory-fout = <156250000>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&qspi {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	eeprom: eeprom@2 {
+		at25,byte-len = <8192>;
+		at25,addr-mode = <2>;
+		at25,page-size = <32>;
+
+		compatible = "atmel,at25";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zed.dts b/roms/u-boot/arch/arm/dts/zynq-zed.dts
new file mode 100644
index 000000000..7a540b63f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zed.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Avnet ZedBoard board";
+	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "spansion,s25fl256s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		m25p,fast-read;
+	};
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zturn-common.dtsi b/roms/u-boot/arch/arm/dts/zynq-zturn-common.dtsi
new file mode 100644
index 000000000..486b6fa2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zturn-common.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
+ *  Copyright (C) 2017 Alexander Graf <agraf@suse.de>
+ *
+ *  Based on zynq-zed.dts which is:
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ */
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		usr-led1 {
+			label = "usr-led1";
+			gpios = <&gpio0 0x0 0x1>;
+			default-state = "off";
+		};
+
+		usr-led2 {
+			label = "usr-led2";
+			gpios = <&gpio0 0x9 0x1>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		K1 {
+			label = "K1";
+			gpios = <&gpio0 0x32 0x1>;
+			linux,code = <0x66>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+	};
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	stlm75@49 {
+		status = "okay";
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+		interrupt-parent = <&intc>;
+		interrupts = <0x0 0x1e 0x4>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zturn-v5.dts b/roms/u-boot/arch/arm/dts/zynq-zturn-v5.dts
new file mode 100644
index 000000000..536632a09
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zturn-v5.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+/include/ "zynq-zturn-common.dtsi"
+
+/ {
+	model = "Zynq Z-Turn MYIR Board V5";
+	compatible = "myir,zynq-zturn-v5", "xlnx,zynq-7000";
+};
+
+&gem0 {
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0x3>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zturn.dts b/roms/u-boot/arch/arm/dts/zynq-zturn.dts
new file mode 100644
index 000000000..620b24a25
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zturn.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+/include/ "zynq-zturn-common.dtsi"
+
+/ {
+	model = "Zynq Z-Turn MYIR Board";
+	compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
+};
+
+&gem0 {
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zybo-z7.dts b/roms/u-boot/arch/arm/dts/zynq-zybo-z7.dts
new file mode 100644
index 000000000..116958ec9
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zybo-z7.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Digilent Zybo Z7 board";
+	compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-ld4 {
+			label = "zynq-zybo-z7:green:ld4";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynq-zybo.dts b/roms/u-boot/arch/arm/dts/zynq-zybo.dts
new file mode 100644
index 000000000..0ac54ebbd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynq-zybo.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Digilent Zybo board";
+	compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 1>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-a2197-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-a2197-revA.dts
new file mode 100644
index 000000000..315313854
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-a2197-revA.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Versal System Controller on a2197 board RevA";
+	compatible = "xlnx,zynqmp-a2197-revA", "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+	aliases {
+		i2c0 = &i2c0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = <&eeprom1 &eeprom0 &eeprom0>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart0 { /* uart0 MIO38-39 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+	clock-frequency = <400000>;
+	i2c-mux@74 { /* this cover MGT board */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		u-boot,dm-pre-reloc;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom0: eeprom@50 { /* u96 - 24LC32A - 256B */
+				compatible = "atmel,24c32";
+				u-boot,dm-pre-reloc;
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+	clock-frequency = <400000>;
+	i2c-mux@74 { /* This cover processor board */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		u-boot,dm-pre-reloc;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom1: eeprom@50 { /* u96 - 24LC32A - 256B */
+				compatible = "atmel,24c32";
+				u-boot,dm-pre-reloc;
+				reg = <0x50>;
+			};
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-clk-ccf.dtsi b/roms/u-boot/arch/arm/dts/zynqmp-clk-ccf.dtsi
new file mode 100644
index 000000000..987792e5c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+/ {
+	fclk0: fclk0 {
+		status = "okay";
+		compatible = "xlnx,fclk";
+		clocks = <&zynqmp_clk PL0_REF>;
+	};
+
+	fclk1: fclk1 {
+		status = "okay";
+		compatible = "xlnx,fclk";
+		clocks = <&zynqmp_clk PL1_REF>;
+	};
+
+	fclk2: fclk2 {
+		status = "okay";
+		compatible = "xlnx,fclk";
+		clocks = <&zynqmp_clk PL2_REF>;
+	};
+
+	fclk3: fclk3 {
+		status = "okay";
+		compatible = "xlnx,fclk";
+		clocks = <&zynqmp_clk PL3_REF>;
+	};
+
+	pss_ref_clk: pss_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>;
+	};
+
+	video_clk: video_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	pss_alt_ref_clk: pss_alt_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	gt_crx_ref_clk: gt_crx_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <108000000>;
+	};
+
+	aux_ref_clk: aux_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	dp_aclk: dp_aclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-accuracy = <100>;
+	};
+};
+
+&zynqmp_firmware {
+	zynqmp_clk: clock-controller {
+		u-boot,dm-pre-reloc;
+		#clock-cells = <1>;
+		compatible = "xlnx,zynqmp-clk";
+		clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
+			 <&aux_ref_clk>, <&gt_crx_ref_clk>;
+		clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
+			      "aux_ref_clk", "gt_crx_ref_clk";
+	};
+};
+
+&can0 {
+	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&can1 {
+	clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&cpu0 {
+	clocks = <&zynqmp_clk ACPU>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gpu {
+	clocks = <&zynqmp_clk GPU_REF>, <&zynqmp_clk GPU_PP0_REF>, <&zynqmp_clk GPU_PP1_REF>;
+};
+
+&lpd_dma_chan1 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan2 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan3 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan4 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan5 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan6 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan7 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan8 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&nand0 {
+	clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gem0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gpio {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&i2c0 {
+	clocks = <&zynqmp_clk I2C0_REF>;
+};
+
+&i2c1 {
+	clocks = <&zynqmp_clk I2C1_REF>;
+};
+
+&pcie {
+	clocks = <&zynqmp_clk PCIE_REF>;
+};
+
+&qspi {
+	clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&sata {
+	clocks = <&zynqmp_clk SATA_REF>;
+};
+
+&sdhci0 {
+	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&sdhci1 {
+	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi0 {
+	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi1 {
+	clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart0 {
+	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart1 {
+	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&usb0 {
+	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&usb1 {
+	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&watchdog0 {
+	clocks = <&zynqmp_clk WDT>;
+};
+
+&lpd_watchdog {
+	clocks = <&zynqmp_clk LPD_WDT>;
+};
+
+&xilinx_ams {
+	clocks = <&zynqmp_clk AMS_REF>;
+};
+
+&zynqmp_pcap {
+	clocks = <&zynqmp_clk PCAP>;
+};
+
+&zynqmp_dpdma {
+	clocks = <&zynqmp_clk DPDMA_REF>;
+};
+
+&zynqmp_dpsub {
+	clocks = <&zynqmp_clk TOPSW_LSBUS>,
+		 <&zynqmp_clk DP_AUDIO_REF>,
+		 <&zynqmp_clk DP_VIDEO_REF>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
new file mode 100644
index 000000000..8ec2e8665
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller
+ *
+ * (C) Copyright 2019 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "Versal System Controller on a2197 Eval board RevA"; /* VCK190/VMK180 */
+	compatible = "xlnx,zynqmp-e-a2197-00-revA", "xlnx,zynqmp-a2197-revA",
+		     "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &dcc;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = <&eeprom>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ina226-vccint {
+		compatible = "iio-hwmon";
+		io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
+	};
+	ina226-vcc-soc {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_soc 0>, <&vcc_soc 1>, <&vcc_soc 2>, <&vcc_soc 3>;
+	};
+	ina226-vcc-pmc {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_pmc 0>, <&vcc_pmc 1>, <&vcc_pmc 2>, <&vcc_pmc 3>;
+	};
+	ina226-vcc-ram {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>;
+	};
+	ina226-vcc-pslp {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_pslp 0>, <&vcc_pslp 1>, <&vcc_pslp 2>, <&vcc_pslp 3>;
+	};
+	ina226-vcc-psfp {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_psfp 0>, <&vcc_psfp 1>, <&vcc_psfp 2>, <&vcc_psfp 3>;
+	};
+	ina226-vccaux {
+		compatible = "iio-hwmon";
+		io-channels = <&vccaux 0>, <&vccaux 1>, <&vccaux 2>, <&vccaux 3>;
+	};
+	ina226-vccaux-pmc {
+		compatible = "iio-hwmon";
+		io-channels = <&vccaux_pmc 0>, <&vccaux_pmc 1>, <&vccaux_pmc 2>, <&vccaux_pmc 3>;
+	};
+	ina226-vcco-500 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcco_500 0>, <&vcco_500 1>, <&vcco_500 2>, <&vcco_500 3>;
+	};
+	ina226-vcco-501 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcco_501 0>, <&vcco_501 1>, <&vcco_501 2>, <&vcco_501 3>;
+	};
+	ina226-vcco-502 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcco_502 0>, <&vcco_502 1>, <&vcco_502 2>, <&vcco_502 3>;
+	};
+	ina226-vcco-503 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcco_503 0>, <&vcco_503 1>, <&vcco_503 2>, <&vcco_503 3>;
+	};
+	ina226-vcc-1v8 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_1v8 0>, <&vcc_1v8 1>, <&vcc_1v8 2>, <&vcc_1v8 3>;
+	};
+	ina226-vcc-3v3 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_3v3 0>, <&vcc_3v3 1>, <&vcc_3v3 2>, <&vcc_3v3 3>;
+	};
+	ina226-vcc-1v2-ddr4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_1v2_ddr4 0>, <&vcc_1v2_ddr4 1>, <&vcc_1v2_ddr4 2>, <&vcc_1v2_ddr4 3>;
+	};
+	ina226-vcc-1v1-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>;
+	};
+	ina226-vadj-fmc {
+		compatible = "iio-hwmon";
+		io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
+	};
+	ina226-mgtyavcc {
+		compatible = "iio-hwmon";
+		io-channels = <&mgtyavcc 0>, <&mgtyavcc 1>, <&mgtyavcc 2>, <&mgtyavcc 3>;
+	};
+	ina226-mgtyavtt {
+		compatible = "iio-hwmon";
+		io-channels = <&mgtyavtt 0>, <&mgtyavtt 1>, <&mgtyavtt 2>, <&mgtyavtt 3>;
+	};
+	ina226-mgtyvccaux {
+		compatible = "iio-hwmon";
+		io-channels = <&mgtyvccaux 0>, <&mgtyvccaux 1>, <&mgtyvccaux 2>, <&mgtyvccaux 3>;
+	};
+};
+
+&uart0 { /* uart0 MIO38-39 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci1 { /* sd1 MIO45-51 cd in place */
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	is-internal-pcspma;
+	phy0: ethernet-phy@0 { /* u131 M88E1512 */
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "", "", "", "", "", /* 0 - 4 */
+		  "", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */
+		  "DC_SYS_CTRL3", "ZU4_TRIGGER", "SYSCTLR_PB", "", "", /* 10 - 14 */
+		  "", "", "", "", "", /* 15 - 19 */
+		  "", "", "", "", "", /* 20 - 24 */
+		  "", "", "", "", "", /* 25 - 29 */
+		  "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+		  "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+		  "", "", "ETH_RESET_B", "", "", /* 40 - 44 */
+		  "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
+		  "SD1_CMD", "SD1_CLK", "", "", "", /* 50 - 54 */
+		  "", "", "", "", "", /* 55 - 59 */
+		  "", "", "", "", "", /* 60 - 64 */
+		  "", "", "", "", "", /* 65 - 69 */
+		  "", "", "", "", "", /* 70 - 74 */
+		  "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
+		  "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "", /* 80 - 84 */
+		  "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "", /* 85 - 89 */
+		  "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
+		  "SYSCTLR_GPIO5", "", "", "", "", /* 95 - 99 */
+		  "", "", "", "", "", /* 100 - 104 */
+		  "", "", "", "", "", /* 105 - 109 */
+		  "", "", "", "", "", /* 110 - 114 */
+		  "", "", "", "", "", /* 115 - 119 */
+		  "", "", "", "", "", /* 120 - 124 */
+		  "", "", "", "", "", /* 125 - 129 */
+		  "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "", "", "", /* 130 - 134 */
+		  "", "", "", "", "", /* 135 - 139 */
+		  "PMBUS_ALERT", "", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */
+		  "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+	status = "okay";
+	clock-frequency = <400000>;
+	i2c-mux@74 { /* u33 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+		i2c@0 { /* PMBUS */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* u152 IR35215 0x16/0x46 vcc_soc */
+			/* u179 ir38164 0x19/0x49 vcco_500 */
+			/* u181 ir38164 0x1a/0x4a vcco_501 */
+			/* u183 ir38164 0x1b/0x4b vcco_502 */
+			/* u185 ir38164 0x1e/0x4e vadj_fmc */
+			/* u187 ir38164 0x1F/0x4f mgtyavcc */
+			/* u189 ir38164 0x20/0x50 mgtyavtt */
+			/* u194 ir38164 0x13/0x43 vdd1_1v8_lp4 */
+			/* u195 ir38164 0x14/0x44 vdd2_1v8_lp4 */
+
+			irps5401_47: irps5401@47 { /* IRPS5401 - u160 */
+				compatible = "infineon,irps5401";
+				reg = <0x47>; /* pmbus / i2c 0x17 */
+			};
+			irps5401_4c: irps5401@4c { /* IRPS5401 - u167 */
+				compatible = "infineon,irps5401";
+				reg = <0x4c>; /* pmbus / i2c 0x1c */
+			};
+			irps5401_4d: irps5401@4d { /* IRPS5401 - u175 */
+				compatible = "infineon,irps5401";
+				reg = <0x4d>; /* pmbus / i2c 0x1d */
+			};
+		};
+		i2c@1 { /* PMBUS1_INA226 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* FIXME check alerts coming to SC */
+			vccint: ina226@40 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccint";
+				reg = <0x40>;
+				shunt-resistor = <500>; /* R440 */
+				/* 0.80V @ 32A 1 of 6 Phases*/
+			};
+			vcc_soc: ina226@41 { /* u161 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-soc";
+				reg = <0x41>;
+				shunt-resistor = <500>; /* R1702 */
+				/* 0.80V @ 18A */
+			};
+			vcc_pmc: ina226@42 { /* u163 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-pmc";
+				reg = <0x42>;
+				shunt-resistor = <5000>; /* R1214 */
+				/* 0.78V @ 500mA */
+			};
+			vcc_ram: ina226@43 { /* u162 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-ram";
+				reg = <0x43>;
+				shunt-resistor = <5000>; /* r1221 */
+				/* 0.78V @ 4A */
+			};
+			vcc_pslp: ina226@44 { /* u165 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-pslp";
+				reg = <0x44>;
+				shunt-resistor = <5000>; /* R1216 */
+				/* 0.78V @ 1A */
+			};
+			vcc_psfp: ina226@45 { /* u164 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-psfp";
+				reg = <0x45>;
+				shunt-resistor = <5000>; /* R1219 */
+				/* 0.78V @ 2A */
+			};
+		};
+		i2c@2 { /* PCIE_CLK */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 */
+				#clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/
+				compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */
+				reg = <0xd8>;
+				/* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */
+				/* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */
+			};
+		};
+		i2c@3 { /* PMBUS2_INA226 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* FIXME check alerts coming to SC */
+			vccaux: ina226@40 { /* u166 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccaux";
+				reg = <0x40>;
+				shunt-resistor = <5000>; /* R382 */
+				/* 1.5V @ 3A */
+			};
+			vccaux_pmc: ina226@41 { /* u168 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccaux-pmc";
+				reg = <0x41>;
+				shunt-resistor = <5000>; /* R1246 */
+				/* 1.5V @ 500mA */
+			};
+			vcco_500: ina226@42 { /* u178 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcco-500";
+				reg = <0x42>;
+				shunt-resistor = <2000>; /* R1300 */
+				/* 3.3V @ 5A */
+			};
+			vcco_501: ina226@43 { /* u180 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcco-501";
+				reg = <0x43>;
+				shunt-resistor = <2000>; /* R1313 */
+				/* 3.3V @ 5A */
+			};
+			vcco_502: ina226@44 { /* u182 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcco-502";
+				reg = <0x44>;
+				shunt-resistor = <2000>; /* R1330 */
+				/* 3.3V @ 5A */
+			};
+			vcco_503: ina226@45 { /* u172 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcco-503";
+				reg = <0x45>;
+				shunt-resistor = <5000>; /* R1229 */
+				/* 1.8V @ 2A */
+			};
+			vcc_1v8: ina226@46 { /* u173 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-1v8";
+				reg = <0x46>;
+				shunt-resistor = <5000>; /* R400 */
+				/* 1.8V @ 6A */
+			};
+			vcc_3v3: ina226@47 { /* u174 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-3v3";
+				reg = <0x47>;
+				shunt-resistor = <5000>; /* R1232 */
+				/* 3.3V @ 500mA */
+			};
+			vcc_1v2_ddr4: ina226@48 { /* u176 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-1v2-ddr4";
+				reg = <0x48>;
+				shunt-resistor = <5000>; /* R1275 */
+				/* 1.2V @ 4A */
+			};
+			vcc1v1_lp4: ina226@49 { /* u177 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v1-lp4";
+				reg = <0x49>;
+				shunt-resistor = <5000>; /* R1286 */
+				/* 1.1V @ 4A */
+			};
+			vadj_fmc: ina226@4a { /* u184 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vadj-fmc";
+				reg = <0x4a>;
+				shunt-resistor = <2000>; /* R1350 */
+				/* 1.5V @ 10A */
+			};
+			mgtyavcc: ina226@4b { /* u186 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgtyavcc";
+				reg = <0x4b>;
+				shunt-resistor = <2000>; /* R1367 */
+				/* 0.88V @ 6A */
+			};
+			mgtyavtt: ina226@4c { /* u188 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgtyavtt";
+				reg = <0x4c>;
+				shunt-resistor = <2000>; /* R1384 */
+				/* 1.2V @ 10A */
+			};
+			mgtyvccaux: ina226@4d { /* u234 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgtyvccaux";
+				reg = <0x4d>;
+				shunt-resistor = <5000>; /* r1679 */
+				/* 1.5V @ 500mA */
+			};
+		};
+		i2c@4 { /* LP_I2C_SM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* FIXME wires ready but chip is missing */
+		};
+		i2c@5 { /* zSFP_SI570 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			si570_zsfp: clock-generator@5d { /* u192 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "si570_zsfp_clk";
+			};
+		};
+		i2c@6 { /* USER_SI570_1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			si570_user1: clock-generator@5d { /* u205 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5f>;
+				temperature-stability = <50>;
+				factory-fout = <100000000>;
+				clock-frequency = <100000000>;
+				clock-output-names = "si570_user1";
+			};
+
+		};
+		i2c@7 { /* USER_SI570_2 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* FIXME wires ready but chip is missing */
+		};
+	};
+};
+
+&i2c1 { /* i2c1 MIO 36-37 */
+	status = "okay";
+	clock-frequency = <400000>;
+
+	i2c-mux@74 { /* u35 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c-mux-idle-disconnect;
+		/* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+		dc_i2c: i2c@0 { /* DC_I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom: eeprom@54 { /* u34 - m24128 16kB */
+				compatible = "st,24c128", "atmel,24c128";
+				reg = <0x54>; /* 0x5c too */
+			};
+			si570_ref_clk: clock-generator@5d { /* u32 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <33333333>;
+				clock-frequency = <33333333>;
+				clock-output-names = "ref_clk";
+				silabs,skip-recall;
+			};
+			/* and connector J212D */
+		};
+		fmc1: i2c@1 { /* FMCP1_IIC */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* FIXME connection to Samtec J51C */
+			/* expected eeprom 0x50 FMC cards */
+		};
+		fmc2: i2c@2 { /* FMCP2_IIC */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* FIXME connection to Samtec J53C */
+			/* expected eeprom 0x50 FMC cards */
+		};
+		i2c@3 { /* DDR4_DIMM1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_ddr_dimm1: clock-generator@60 { /* u2 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x60>;
+				temperature-stability = <50>;
+				factory-fout = <200000000>;
+				clock-frequency = <200000000>;
+				clock-output-names = "si570_ddrdimm1_clk";
+				silabs,skip-recall;
+			};
+		};
+		i2c@4 { /* LPDDR4_SI570_CLK2 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si570_lpddr4clk2: clock-generator@60 { /* u3 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x60>;
+				temperature-stability = <50>;
+				factory-fout = <200000000>;
+				clock-frequency = <200000000>;
+				clock-output-names = "si570_lpddr4_clk2";
+			};
+		};
+		i2c@5 { /* LPDDR4_SI570_CLK1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			si570_lpddr4clk1: clock-generator@60 { /* u4 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x60>;
+				temperature-stability = <50>;
+				factory-fout = <200000000>;
+				clock-frequency = <200000000>;
+				clock-output-names = "si570_lpddr4_clk1";
+			};
+		};
+		i2c@6 { /* HSDP_SI570 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			si570_hsdp: clock-generator@5d { /* u5 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "si570_hsdp_clk";
+			};
+		};
+		i2c@7 { /* 8A34001 - U219B and J310 connector */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+	i2c-mux@75 { /* u214 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		i2c@0 { /* SFP0_IIC */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* SFP0 */
+		};
+		i2c@1 { /* SFP1_IIC */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* SFP1 */
+		};
+		i2c@2 { /* QSFP1_I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* QSFP1 */
+		};
+		/* 3 - 7 unused */
+	};
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
new file mode 100644
index 000000000..f94b797d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller on MGT
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Versal System Controller on a2197 MGT Char board RevA";
+	compatible = "xlnx,zynqmp-g-a2197-00-revA", "xlnx,zynqmp-a2197-revA",
+		     "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		mmc0 = &sdhci0;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &dcc;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = <&eeprom>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u82 {
+		compatible = "iio-hwmon";
+		io-channels = <&u82 0>, <&u82 1>, <&u82 2>, <&u82 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+};
+
+&sdhci0 { /* emmc MIO 13-23 16GB */
+	status = "okay";
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+};
+
+&uart0 { /* uart0 MIO38-39 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&gem0 { /* eth MDIO 76/77 */
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	is-internal-pcspma;
+	phy0: ethernet-phy@0 { /* marwell m88e1512 */
+		reg = <0>;
+		reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+/*		xlnx,phy-type = <PHY_TYPE_SGMII>; */
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "", "", "", "", "", /* 0 - 4 */
+		  "", "", "", "", "", /* 5 - 9 */
+		  "", "", "", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+		  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+		  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
+		  "", "", "", "", "", /* 25 - 29 */
+		  "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+		  "LP_I2C0_PMC_SDA", "", "", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+		  "", "", "ETH_RESET_B", "", "", /* 40 - 44 */
+		  "", "", "", "", "", /* 45 - 49 */
+		  "", "", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+		  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+		  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */
+		  "", "", "", "", "", /* 65 - 69 */
+		  "", "", "", "", "", /* 70 - 74 */
+		  "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
+		  "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */
+		  "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */
+		  "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
+		  "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */
+		  "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */
+		  "SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */
+		  "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */
+		  "SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */
+		  "SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */
+		  "SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */
+		  "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */
+		  "TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */
+		  "PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */
+		  "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+	status = "okay";
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+	i2c-mux@74 { /* u94 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom: eeprom@50 { /* u96 - 24LC32A - 256B */
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+		i2c@1 { /* CM_I2C_SCL - Samtec */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c@2 { /* PMBUS - AFX_PMBUS */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			tps544@d { /* u85 */
+				compatible = "ti,tps544b25";
+				reg = <0xd>;
+			};
+			tps544@10 { /* u73 */
+				compatible = "ti,tps544b25";
+				reg = <0x10>;
+			};
+			tps544@11 { /* u76 */
+				compatible = "ti,tps544b25";
+				reg = <0x11>;
+			};
+			tps544@12 { /* u77 */
+				compatible = "ti,tps544b25";
+				reg = <0x12>;
+			};
+			tps544@13 { /* u80 */
+				compatible = "ti,tps544b25";
+				reg = <0x13>;
+			};
+			tps544@14 { /* u81 */
+				compatible = "ti,tps544b25";
+				reg = <0x14>;
+			};
+			tps544@15 { /* u83 */
+				compatible = "ti,tps544b25";
+				reg = <0x15>;
+			};
+			tps544@16 { /* u63 */
+				compatible = "ti,tps544b25";
+				reg = <0x16>;
+			};
+			tps544@17 { /* u66 */
+				compatible = "ti,tps544b25";
+				reg = <0x17>;
+			};
+			tps544@18 { /* u67 */
+				compatible = "ti,tps544b25";
+				reg = <0x18>;
+			};
+			tps544@19 { /* u69 */
+				compatible = "ti,tps544b25";
+				reg = <0x19>;
+			};
+			tps544@1d { /* u88 */
+				compatible = "ti,tps544b25";
+				reg = <0x1d>;
+			};
+			tps544@1e { /* u89 */
+				compatible = "ti,tps544b25";
+				reg = <0x1e>;
+			};
+			tps544@1f { /* u87 */
+				compatible = "ti,tps544b25";
+				reg = <0x1f>;
+			};
+			tps544@20 { /* u71 */
+				compatible = "ti,tps544b25";
+				reg = <0x20>;
+			};
+			u74: ina226@40 { /* u74 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			u75: ina226@41 { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			u78: ina226@42 { /* u78 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u79: ina226@43 { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x43>;
+				shunt-resistor = <1000>;
+			};
+			u82: ina226@44 { /* u82 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u82";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+			u84: ina226@45 { /* u84 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			tps53681@c0 { /* u53 - FIXME name - don't know what it does - also vcc_io_soc */
+				compatible = "ti,tps53681", "ti,tps53679";
+				reg = <0xc0>;
+			};
+		};
+		i2c@3 { /* fmc1 via JA2G */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom_fmc1: eeprom@50 { /* on FMC */
+				compatible = "atmel,24c04";
+				reg = <0x50>;
+			};
+		};
+		i2c@4 { /* fmc2 via JA3G */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			eeprom_fmc2: eeprom@50 { /* on FMC */
+				compatible = "atmel,24c04";
+				reg = <0x50>;
+			};
+		};
+		i2c@5 { /* fmc3 via JA4G */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			eeprom_fmc3: eeprom@50 { /* on FMC */
+				compatible = "atmel,24c04";
+				reg = <0x50>;
+			};
+		};
+		i2c@6 { /* ddr dimm */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+		/* 7 unused */
+	};
+};
+
+&usb0 { /* USB0 MIO52-63 */
+	status = "okay";
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
new file mode 100644
index 000000000..213149a3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Versal System Controller on a2197 Memory Char board RevA";
+	compatible = "xlnx,zynqmp-m-a2197-01-revA", "xlnx,zynqmp-a2197-revA",
+		     "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = <&eeprom>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */
+	};
+
+	ina226-vcc-aux {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>;
+	};
+	ina226-vcc-ram {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>;
+	};
+	ina226-vcc1v1-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>;
+	};
+	ina226-vcc1v2-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>;
+	};
+	ina226-vdd1-1v8-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>;
+	};
+	ina226-vcc0v6-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc0v6_lp4 0>, <&vcc0v6_lp4 1>, <&vcc0v6_lp4 2>, <&vcc0v6_lp4 3>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&sdhci0 { /* emmc MIO 13-23 - with some settings  16GB */
+	status = "okay";
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>; /* FIXME tap delay */
+};
+
+&uart0 { /* uart0 MIO38-39 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 { /* uart1 MIO40-41 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci1 { /* sd1 MIO45-51 cd in place */
+	status = "disable";
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii"; /* DTG generates this properly  1512 */
+	phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
+	phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
+		reg = <0>;
+/*		xlnx,phy-type = <PHY_TYPE_SGMII>; */
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */
+		  "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */
+		  "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+		  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+		  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
+		  "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */
+		  "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+		  "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+		  "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */
+		  "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
+		  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+		  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+		  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */
+		  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
+		  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
+		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "", "", "", "", "", /* 78 - 79 */
+		  "", "", "", "", "", /* 80 - 84 */
+		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 90 - 94 */
+		  "", "", "", "", "", /* 95 - 99 */
+		  "", "", "", "", "", /* 100 - 104 */
+		  "", "", "", "", "", /* 105 - 109 */
+		  "", "", "", "", "", /* 110 - 114 */
+		  "", "", "", "", "", /* 115 - 119 */
+		  "", "", "", "", "", /* 120 - 124 */
+		  "", "", "", "", "", /* 125 - 129 */
+		  "", "", "", "", "", /* 130 - 134 */
+		  "", "", "", "", "", /* 135 - 139 */
+		  "", "", "", "", "", /* 140 - 144 */
+		  "", "", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+	status = "okay";
+	clock-frequency = <400000>;
+	i2c-mux@74 { /* u46 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
+		i2c@0 { /* PMBUS  must be enabled via SW21 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			reg_vcc1v2_lp4: tps544@15 { /* u97 */
+				compatible = "ti,tps544b25";
+				reg = <0x15>;
+			};
+			reg_vcc1v1_lp4: tps544@16 { /* u95 */
+				compatible = "ti,tps544b25";
+				reg = <0x16>;
+			};
+			reg_vdd1_1v8_lp4: tps544@17 { /* u99 */
+				compatible = "ti,tps544b25";
+				reg = <0x17>;
+			};
+			/* UTIL_PMBUS connection */
+			reg_vcc1v8: tps544@13 { /* u92 */
+				compatible = "ti,tps544b25";
+				reg = <0x13>;
+			};
+			reg_vcc3v3: tps544@14 { /* u93 */
+				compatible = "ti,tps544b25";
+				reg = <0x14>;
+			};
+			reg_vcc5v0: tps544@1e { /* u94 */
+				compatible = "ti,tps544b25";
+				reg = <0x1e>;
+			};
+		};
+		i2c@1 { /* PMBUS_INA226 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			vcc_aux: ina226@42 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-aux";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			vcc_ram: ina226@43 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-ram";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			vcc1v1_lp4: ina226@46 { /* u96 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v1-lp4";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			vcc1v2_lp4: ina226@47 { /* u98 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v2-lp4";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			vdd1_1v8_lp4: ina226@48 { /* u100 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vdd1-1v8-lp4";
+				reg = <0x48>;
+				shunt-resistor = <5000>;
+			};
+			vcc0v6_lp4: ina226@49 { /* u101 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc0v6-lp4";
+				reg = <0x49>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 { /* PMBUS1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			reg_vccint: tps53681@c0 { /* u69 */
+				compatible = "ti,tps53681", "ti,tps53679";
+				reg = <0xc0>;
+			};
+			reg_vcc_pmc: tps544@7 { /* u80 */
+				compatible = "ti,tps544b25";
+				reg = <0x7>;
+			};
+			reg_vcc_ram: tps544@8 { /* u82 */
+				compatible = "ti,tps544b25";
+				reg = <0x8>;
+			};
+			reg_vcc_pslp: tps544@9 { /* u83 */
+				compatible = "ti,tps544b25";
+				reg = <0x9>;
+			};
+			reg_vcc_psfp: tps544@a { /* u84 */
+				compatible = "ti,tps544b25";
+				reg = <0xa>;
+			};
+			reg_vccaux: tps544@d { /* u85 */
+				compatible = "ti,tps544b25";
+				reg = <0xd>;
+			};
+			reg_vccaux_pmc: tps544@e { /* u87 */
+				compatible = "ti,tps544b25";
+				reg = <0xe>;
+			};
+			reg_vcco_500: tps544@f { /* u88 */
+				compatible = "ti,tps544b25";
+				reg = <0xf>;
+			};
+			reg_vcco_501: tps544@10 { /* u89 */
+				compatible = "ti,tps544b25";
+				reg = <0x10>;
+			};
+			reg_vcco_502: tps544@11 { /* u90 */
+				compatible = "ti,tps544b25";
+				reg = <0x11>;
+			};
+			reg_vcco_503: tps544@12 { /* u91 */
+				compatible = "ti,tps544b25";
+				reg = <0x12>;
+			};
+		};
+		i2c@3 { /* MEM PMBUS - FIXME bug in schematics */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* reg = <3>; */
+		};
+		i2c@4 { /* LP_I2C_SM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* connected to U20G */
+		};
+		/* 5-7 unused */
+	};
+};
+
+/* TODO sysctrl via J239 */
+/* TODO samtec J212G/H via J242 */
+/* TODO teensy via U30 PCA9543A bus 1 */
+&i2c1 { /* i2c1 MIO 36-37 */
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Must be enabled via J242 */
+	eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	i2c-mux@74 { /* u47 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */
+		dc_i2c: i2c@0 { /* DC_I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+			si570_ref_clk: clock-generator@5d { /* u26 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>; /* FIXME addr */
+				temperature-stability = <50>;
+				factory-fout = <33333333>;
+				clock-frequency = <33333333>;
+				clock-output-names = "REF_CLK"; /* FIXME */
+				silabs,skip-recall;
+			};
+			/* Connection via Samtec U20D */
+			/* Use for storing information about X-PRC card */
+			x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */
+				compatible = "atmel,24c02";
+				reg = <0x52>;
+			};
+
+			/* Use for setting up certain features on X-PRC card */
+			x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */
+				compatible = "nxp,pca9534";
+				reg = <0x22>;
+				gpio-controller; /* IRQ not connected */
+				#gpio-cells = <2>;
+				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+						  "", "", "", "";
+				gtr_sel0 {
+					gpio-hog;
+					gpios = <0 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_1";
+				};
+				gtr_sel1 {
+					gpio-hog;
+					gpios = <1 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_2";
+				};
+				gtr_sel2 {
+					gpio-hog;
+					gpios = <2 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_3";
+				};
+				gtr_sel3 {
+					gpio-hog;
+					gpios = <3 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_4";
+				};
+			};
+		};
+		i2c@2 { /* C0_LP4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_c0_lp4: clock-generator@55 { /* u10 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C0_LP4_SI570_CLK";
+			};
+		};
+		i2c@3 { /* C1_LP4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_c1_lp4: clock-generator@5d { /* u10 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>; /* FIXME addr */
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C1_LP4_SI570_CLK";
+			};
+		};
+		i2c@4 { /* C2_LP4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si570_c2_lp4: clock-generator@55 { /* u10 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C2_LP4_SI570_CLK";
+			};
+		};
+		i2c@5 { /* C3_LP4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			si570_c3_lp4: clock-generator@55 { /* u15 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C3_LP4_SI570_CLK";
+			};
+		};
+		i2c@6 { /* HSDP_SI570 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			si570_hsdp: clock-generator@5d { /* u19 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>; /* FIXME addr */
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "HSDP_SI570";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	/* dr_mode = "peripheral"; */
+	maximum-speed = "high-speed";
+};
+
+&usb1 {
+	status = "disabled"; /* not at mem board */
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_1 {
+	/delete-property/ phy-names ;
+	/delete-property/ phys ;
+	maximum-speed = "high-speed";
+	snps,dis_u2_susphy_quirk ;
+	snps,dis_u3_susphy_quirk ;
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-02-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
new file mode 100644
index 000000000..c458110e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Versal System Controller on a2197 Memory Char board RevA";
+	compatible = "xlnx,zynqmp-m-a2197-02-revA", "xlnx,zynqmp-a2197-revA",
+		     "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = <&eeprom>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */
+	};
+
+	ina226-vcc-aux {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>;
+	};
+	ina226-vcc-ram {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>;
+	};
+	ina226-vcc1v1-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>;
+	};
+	ina226-vcc1v2-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>;
+	};
+	ina226-vdd1-1v8-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&sdhci0 { /* emmc MIO 13-23 - with some settings  16GB */
+	status = "okay";
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>; /* FIXME tap delay */
+};
+
+&uart0 { /* uart0 MIO38-39 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 { /* uart1 MIO40-41 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci1 { /* sd1 MIO45-51 cd in place */
+	status = "disable";
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
+	phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */
+		  "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */
+		  "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+		  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+		  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
+		  "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */
+		  "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+		  "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+		  "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */
+		  "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
+		  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+		  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+		  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */
+		  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
+		  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
+		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "", "", "", "", "", /* 78 - 79 */
+		  "", "", "", "", "", /* 80 - 84 */
+		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 90 - 94 */
+		  "", "", "", "", "", /* 95 - 99 */
+		  "", "", "", "", "", /* 100 - 104 */
+		  "", "", "", "", "", /* 105 - 109 */
+		  "", "", "", "", "", /* 110 - 114 */
+		  "", "", "", "", "", /* 115 - 119 */
+		  "", "", "", "", "", /* 120 - 124 */
+		  "", "", "", "", "", /* 125 - 129 */
+		  "", "", "", "", "", /* 130 - 134 */
+		  "", "", "", "", "", /* 135 - 139 */
+		  "", "", "", "", "", /* 140 - 144 */
+		  "", "", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+	status = "okay";
+	clock-frequency = <400000>;
+	i2c-mux@74 { /* u46 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
+		i2c@0 { /* PMBUS  must be enabled via SW21 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			reg_vcc1v2_lp4: tps544@15 { /* u97 */
+				compatible = "ti,tps544b25";
+				reg = <0x15>;
+			};
+			reg_vcc1v1_lp4: tps544@16 { /* u95 */
+				compatible = "ti,tps544b25";
+				reg = <0x16>;
+			};
+			reg_vdd1_1v8_lp4: tps544@17 { /* u99 */
+				compatible = "ti,tps544b25";
+				reg = <0x17>;
+			};
+			/* UTIL_PMBUS connection */
+			reg_vcc1v8: tps544@13 { /* u92 */
+				compatible = "ti,tps544b25";
+				reg = <0x13>;
+			};
+			reg_vcc3v3: tps544@14 { /* u93 */
+				compatible = "ti,tps544b25";
+				reg = <0x14>;
+			};
+			reg_vcc5v0: tps544@1e { /* u94 */
+				compatible = "ti,tps544b25";
+				reg = <0x1e>;
+			};
+			reg_vpp_2v5_ddr4: tps544@1x { /* u3007 */
+				compatible = "ti,tps544b25";
+				reg = <0x17>; /* FIXME wrong in schematics */
+			};
+		};
+		i2c@1 { /* PMBUS_INA226 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			vcc_aux: ina226@42 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-aux";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			vcc_ram: ina226@43 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-ram";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			vcc1v1_lp4: ina226@46 { /* u96 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v1-lp4";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			vcc1v2_lp4: ina226@47 { /* u98 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v2-lp4";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			vdd1_1v8_lp4: ina226@48 { /* u100 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vdd1-1v8-lp4";
+				reg = <0x48>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 { /* PMBUS1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			reg_vccint: tps53681@c0 { /* u69 */
+				compatible = "ti,tps53681", "ti,tps53679";
+				reg = <0xc0>;
+			};
+			reg_vcc_pmc: tps544@7 { /* u80 */
+				compatible = "ti,tps544b25";
+				reg = <0x7>;
+			};
+			reg_vcc_ram: tps544@8 { /* u82 */
+				compatible = "ti,tps544b25";
+				reg = <0x8>;
+			};
+			reg_vcc_pslp: tps544@9 { /* u83 */
+				compatible = "ti,tps544b25";
+				reg = <0x9>;
+			};
+			reg_vcc_psfp: tps544@a { /* u84 */
+				compatible = "ti,tps544b25";
+				reg = <0xa>;
+			};
+			reg_vccaux: tps544@d { /* u85 */
+				compatible = "ti,tps544b25";
+				reg = <0xd>;
+			};
+			reg_vccaux_pmc: tps544@e { /* u87 */
+				compatible = "ti,tps544b25";
+				reg = <0xe>;
+			};
+			reg_vcco_500: tps544@f { /* u88 */
+				compatible = "ti,tps544b25";
+				reg = <0xf>;
+			};
+			reg_vcco_501: tps544@10 { /* u89 */
+				compatible = "ti,tps544b25";
+				reg = <0x10>;
+			};
+			reg_vcco_502: tps544@11 { /* u90 */
+				compatible = "ti,tps544b25";
+				reg = <0x11>;
+			};
+			reg_vcco_503: tps544@12 { /* u91 */
+				compatible = "ti,tps544b25";
+				reg = <0x12>;
+			};
+		};
+		i2c@3 { /* MEM PMBUS - FIXME bug in schematics */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* reg = <3>; */
+		};
+		i2c@4 { /* LP_I2C_SM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* connected to U20G */
+		};
+		i2c@5 { /* C0_DDR4_RDIMM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+		i2c@6 { /* C2_DDR5_RDIMM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+		i2c@7 { /* C3_DDR4_UDIMM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/* TODO sysctrl via J239 */
+/* TODO samtec J212G/H via J242 */
+/* TODO teensy via U30 PCA9543A bus 1 */
+&i2c1 { /* i2c1 MIO 36-37 */
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Must be enabled via J242 */
+	eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	i2c-mux@74 { /* u47 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */
+		dc_i2c: i2c@0 { /* DC_I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+			si570_ref_clk: clock-generator@5d { /* u26 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>; /* FIXME addr */
+				temperature-stability = <50>;
+				factory-fout = <33333333>;
+				clock-frequency = <33333333>;
+				clock-output-names = "REF_CLK"; /* FIXME */
+				silabs,skip-recall;
+			};
+			/* Connection via Samtec U20D */
+			/* Use for storing information about X-PRC card */
+			x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */
+				compatible = "atmel,24c02";
+				reg = <0x52>;
+			};
+
+			/* Use for setting up certain features on X-PRC card */
+			x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */
+				compatible = "nxp,pca9534";
+				reg = <0x22>;
+				gpio-controller; /* IRQ not connected */
+				#gpio-cells = <2>;
+				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+						  "", "", "", "";
+				gtr_sel0 {
+					gpio-hog;
+					gpios = <0 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_1";
+				};
+				gtr_sel1 {
+					gpio-hog;
+					gpios = <1 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_2";
+				};
+				gtr_sel2 {
+					gpio-hog;
+					gpios = <2 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_3";
+				};
+				gtr_sel3 {
+					gpio-hog;
+					gpios = <3 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_4";
+				};
+			};
+		};
+		i2c@2 { /* C0_DDR4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_c0_ddr4: clock-generator@55 { /* u4 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C0_DD4_SI570_CLK";
+			};
+		};
+		i2c@3 { /* C1_RLD3 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_c1_lp4: clock-generator@55 { /* u7 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C1_RLD3_SI570_CLK";
+			};
+		};
+		i2c@4 { /* C2_DDR5 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si570_c2_lp4: clock-generator@55 { /* u10 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C2_DDR5_SI570_CLK";
+			};
+		};
+		i2c@5 { /* C3_DDR4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			si570_c3_lp4: clock-generator@55 { /* u15 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C3_LP4_SI570_CLK";
+			};
+		};
+		i2c@6 { /* HSDP_SI570 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			si570_hsdp: clock-generator@5d { /* u19 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "HSDP_SI570";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	/* dr_mode = "peripheral"; */
+	maximum-speed = "high-speed";
+};
+
+&usb1 {
+	status = "disabled"; /* not at mem board */
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_1 {
+	/delete-property/ phy-names ;
+	/delete-property/ phys ;
+	maximum-speed = "high-speed";
+	snps,dis_u2_susphy_quirk ;
+	snps,dis_u3_susphy_quirk ;
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-03-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
new file mode 100644
index 000000000..cee7ca1fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Versal System Controller on a2197 Memory Char board RevA";
+	compatible = "xlnx,zynqmp-m-a2197-03-revA", "xlnx,zynqmp-a2197-revA",
+		     "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = <&eeprom>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */
+	};
+
+	ina226-vcc-aux {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>;
+	};
+	ina226-vcc-ram {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>;
+	};
+	ina226-vcc1v1-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>;
+	};
+	ina226-vcc1v2-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>;
+	};
+	ina226-vdd1-1v8-lp4 {
+		compatible = "iio-hwmon";
+		io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&sdhci0 { /* emmc MIO 13-23 - with some settings  16GB */
+	status = "okay";
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>; /* FIXME tap delay */
+};
+
+&uart0 { /* uart0 MIO38-39 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 { /* uart1 MIO40-41 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci1 { /* sd1 MIO45-51 cd in place */
+	status = "disable";
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
+	phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */
+		  "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */
+		  "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+		  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+		  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
+		  "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */
+		  "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+		  "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+		  "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */
+		  "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
+		  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+		  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+		  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */
+		  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
+		  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
+		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "", "", "", "", "", /* 78 - 79 */
+		  "", "", "", "", "", /* 80 - 84 */
+		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 90 - 94 */
+		  "", "", "", "", "", /* 95 - 99 */
+		  "", "", "", "", "", /* 100 - 104 */
+		  "", "", "", "", "", /* 105 - 109 */
+		  "", "", "", "", "", /* 110 - 114 */
+		  "", "", "", "", "", /* 115 - 119 */
+		  "", "", "", "", "", /* 120 - 124 */
+		  "", "", "", "", "", /* 125 - 129 */
+		  "", "", "", "", "", /* 130 - 134 */
+		  "", "", "", "", "", /* 135 - 139 */
+		  "", "", "", "", "", /* 140 - 144 */
+		  "", "", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+	status = "okay";
+	clock-frequency = <400000>;
+	i2c-mux@74 { /* u46 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
+		i2c@0 { /* PMBUS  must be enabled via SW21 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			reg_vcc1v2_lp4: tps544@15 { /* u97 */
+				compatible = "ti,tps544b25";
+				reg = <0x15>;
+			};
+			reg_vcc1v1_lp4: tps544@16 { /* u95 */
+				compatible = "ti,tps544b25";
+				reg = <0x16>;
+			};
+			reg_vdd1_1v8_lp4: tps544@17 { /* u99 */
+				compatible = "ti,tps544b25";
+				reg = <0x17>;
+			};
+			/* UTIL_PMBUS connection */
+			reg_vcc1v8: tps544@13 { /* u92 */
+				compatible = "ti,tps544b25";
+				reg = <0x13>;
+			};
+			reg_vcc3v3: tps544@14 { /* u93 */
+				compatible = "ti,tps544b25";
+				reg = <0x14>;
+			};
+			reg_vcc5v0: tps544@1e { /* u94 */
+				compatible = "ti,tps544b25";
+				reg = <0x1e>;
+			};
+			reg_vpp_2v5_ddr4: tps544@1x { /* u3007 */
+				compatible = "ti,tps544b25";
+				reg = <0x17>; /* FIXME wrong in schematics */
+			};
+		};
+		i2c@1 { /* PMBUS_INA226 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			vcc_aux: ina226@42 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-aux";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			vcc_ram: ina226@43 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc-ram";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			vcc1v1_lp4: ina226@46 { /* u96 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v1-lp4";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			vcc1v2_lp4: ina226@47 { /* u98 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v2-lp4";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			vdd1_1v8_lp4: ina226@48 { /* u100 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vdd1-1v8-lp4";
+				reg = <0x48>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 { /* PMBUS1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			reg_vccint: tps53681@c0 { /* u69 */
+				compatible = "ti,tps53681", "ti,tps53679";
+				reg = <0xc0>;
+			};
+			reg_vcc_pmc: tps544@7 { /* u80 */
+				compatible = "ti,tps544b25";
+				reg = <0x7>;
+			};
+			reg_vcc_ram: tps544@8 { /* u82 */
+				compatible = "ti,tps544b25";
+				reg = <0x8>;
+			};
+			reg_vcc_pslp: tps544@9 { /* u83 */
+				compatible = "ti,tps544b25";
+				reg = <0x9>;
+			};
+			reg_vcc_psfp: tps544@a { /* u84 */
+				compatible = "ti,tps544b25";
+				reg = <0xa>;
+			};
+			reg_vccaux: tps544@d { /* u85 */
+				compatible = "ti,tps544b25";
+				reg = <0xd>;
+			};
+			reg_vccaux_pmc: tps544@e { /* u87 */
+				compatible = "ti,tps544b25";
+				reg = <0xe>;
+			};
+			reg_vcco_500: tps544@f { /* u88 */
+				compatible = "ti,tps544b25";
+				reg = <0xf>;
+			};
+			reg_vcco_501: tps544@10 { /* u89 */
+				compatible = "ti,tps544b25";
+				reg = <0x10>;
+			};
+			reg_vcco_502: tps544@11 { /* u90 */
+				compatible = "ti,tps544b25";
+				reg = <0x11>;
+			};
+			reg_vcco_503: tps544@12 { /* u91 */
+				compatible = "ti,tps544b25";
+				reg = <0x12>;
+			};
+		};
+		i2c@3 { /* MEM PMBUS - FIXME bug in schematics */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* reg = <3>; */
+		};
+		i2c@4 { /* LP_I2C_SM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* connected to U20G */
+		};
+		i2c@5 { /* DDR4_SODIMM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+	};
+};
+
+/* TODO sysctrl via J239 */
+/* TODO samtec J212G/H via J242 */
+/* TODO teensy via U30 PCA9543A bus 1 */
+&i2c1 { /* i2c1 MIO 36-37 */
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Must be enabled via J242 */
+	eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	i2c-mux@74 { /* u47 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */
+		dc_i2c: i2c@0 { /* DC_I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+			si570_ref_clk: clock-generator@5d { /* u26 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>; /* FIXME addr */
+				temperature-stability = <50>;
+				factory-fout = <33333333>;
+				clock-frequency = <33333333>;
+				clock-output-names = "REF_CLK"; /* FIXME */
+				silabs,skip-recall;
+			};
+			/* Connection via Samtec U20D */
+			/* Use for storing information about X-PRC card */
+			x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */
+				compatible = "atmel,24c02";
+				reg = <0x52>;
+			};
+
+			/* Use for setting up certain features on X-PRC card */
+			x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */
+				compatible = "nxp,pca9534";
+				reg = <0x22>;
+				gpio-controller; /* IRQ not connected */
+				#gpio-cells = <2>;
+				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+						  "", "", "", "";
+				gtr_sel0 {
+					gpio-hog;
+					gpios = <0 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_1";
+				};
+				gtr_sel1 {
+					gpio-hog;
+					gpios = <1 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_2";
+				};
+				gtr_sel2 {
+					gpio-hog;
+					gpios = <2 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_3";
+				};
+				gtr_sel3 {
+					gpio-hog;
+					gpios = <3 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_4";
+				};
+			};
+		};
+		i2c@2 { /* C0_DDR4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_c0_ddr4: clock-generator@55 { /* u4 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C0_DD4_SI570_CLK";
+			};
+		};
+		i2c@3 { /* C1_SODIMM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_c1_lp4: clock-generator@55 { /* u7 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C1_SODIMM_SI570_CLK";
+			};
+		};
+		i2c@4 { /* C2_QDRIV */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si570_c2_lp4: clock-generator@55 { /* u10 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C2_QDRIV_SI570_CLK";
+			};
+		};
+		i2c@5 { /* C3_DDR4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			si570_c3_lp4: clock-generator@55 { /* u15 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x55>;
+				temperature-stability = <50>;
+				factory-fout = <30000000>;
+				clock-frequency = <30000000>;
+				clock-output-names = "C3_LP4_SI570_CLK";
+			};
+		};
+		i2c@6 { /* HSDP_SI570 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			si570_hsdp: clock-generator@5d { /* u19 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "HSDP_SI570";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	/* dr_mode = "peripheral"; */
+	maximum-speed = "high-speed";
+};
+
+&usb1 {
+	status = "disabled"; /* not at mem board */
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_1 {
+	/delete-property/ phy-names ;
+	/delete-property/ phys ;
+	maximum-speed = "high-speed";
+	snps,dis_u2_susphy_quirk ;
+	snps,dis_u3_susphy_quirk ;
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-mini-emmc0.dts b/roms/u-boot/arch/arm/dts/zynqmp-mini-emmc0.dts
new file mode 100644
index 000000000..8d9f9ca37
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-mini-emmc0.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP Mini Configuration
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "ZynqMP MINI EMMC0";
+	compatible = "xlnx,zynqmp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &dcc;
+		mmc0 = &sdhci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
+	clk_xin: clk_xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
+	firmware {
+		zynqmp_firmware: zynqmp-firmware {
+			compatible = "xlnx,zynqmp-firmware";
+			#power-domain-cells = <1>;
+			method = "smc";
+			u-boot,dm-pre-reloc;
+
+			zynqmp_power: zynqmp-power {
+				u-boot,dm-pre-reloc;
+				compatible = "xlnx,zynqmp-power";
+				mboxes = <&ipi_mailbox_pmu1 0>,
+					 <&ipi_mailbox_pmu1 1>;
+				mbox-names = "tx", "rx";
+			};
+		};
+	};
+
+	zynqmp_ipi: zynqmp_ipi {
+		u-boot,dm-pre-reloc;
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		xlnx,ipi-id = <0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipi_mailbox_pmu1: mailbox@ff990400 {
+			u-boot,dm-pre-reloc;
+			reg = <0x0 0xff9905c0 0x0 0x20>,
+			      <0x0 0xff9905e0 0x0 0x20>,
+			      <0x0 0xff990e80 0x0 0x20>,
+			      <0x0 0xff990ea0 0x0 0x20>;
+			reg-names = "local_request_region",
+				    "local_response_region",
+				    "remote_request_region",
+				    "remote_response_region";
+			#mbox-cells = <1>;
+			xlnx,ipi-id = <4>;
+		};
+	};
+
+	amba: amba {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sdhci0: sdhci@ff160000 {
+			u-boot,dm-pre-reloc;
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			non-removable;
+			bus-width = <8>;
+			reg = <0x0 0xff160000 0x0 0x1000>;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clk_xin &clk_xin>;
+			xlnx,device_id = <0>;
+		};
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-mini-emmc1.dts b/roms/u-boot/arch/arm/dts/zynqmp-mini-emmc1.dts
new file mode 100644
index 000000000..5722b762d
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-mini-emmc1.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP Mini Configuration
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "ZynqMP MINI EMMC1";
+	compatible = "xlnx,zynqmp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &dcc;
+		mmc0 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
+	clk_xin: clk_xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
+	firmware {
+		zynqmp_firmware: zynqmp-firmware {
+			compatible = "xlnx,zynqmp-firmware";
+			#power-domain-cells = <1>;
+			method = "smc";
+			u-boot,dm-pre-reloc;
+
+			zynqmp_power: zynqmp-power {
+				u-boot,dm-pre-reloc;
+				compatible = "xlnx,zynqmp-power";
+				mboxes = <&ipi_mailbox_pmu1 0>,
+					 <&ipi_mailbox_pmu1 1>;
+				mbox-names = "tx", "rx";
+			};
+		};
+	};
+
+	zynqmp_ipi: zynqmp_ipi {
+		u-boot,dm-pre-reloc;
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		xlnx,ipi-id = <0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipi_mailbox_pmu1: mailbox@ff990400 {
+			u-boot,dm-pre-reloc;
+			reg = <0x0 0xff9905c0 0x0 0x20>,
+			      <0x0 0xff9905e0 0x0 0x20>,
+			      <0x0 0xff990e80 0x0 0x20>,
+			      <0x0 0xff990ea0 0x0 0x20>;
+			reg-names = "local_request_region",
+				    "local_response_region",
+				    "remote_request_region",
+				    "remote_response_region";
+			#mbox-cells = <1>;
+			xlnx,ipi-id = <4>;
+		};
+	};
+
+	amba: amba {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sdhci1: sdhci@ff170000 {
+			u-boot,dm-pre-reloc;
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			non-removable;
+			bus-width = <8>;
+			reg = <0x0 0xff170000 0x0 0x1000>;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clk_xin &clk_xin>;
+			xlnx,device_id = <1>;
+		};
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-mini-nand.dts b/roms/u-boot/arch/arm/dts/zynqmp-mini-nand.dts
new file mode 100644
index 000000000..d376ade83
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-mini-nand.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP Mini Configuration
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "ZynqMP MINI NAND";
+	compatible = "xlnx,zynqmp";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &dcc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x40000000>;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
+	amba: amba {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		nand0: nand@ff100000 {
+			compatible = "arasan,nfc-v3p10";
+			status = "okay";
+			reg = <0x0 0xff100000 0x1000>;
+			clock-names = "clk_sys", "clk_flash";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			arasan,has-mdma;
+			num-cs = <2>;
+		};
+	};
+};
+
+&dcc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-mini-qspi.dts b/roms/u-boot/arch/arm/dts/zynqmp-mini-qspi.dts
new file mode 100644
index 000000000..9b4320fe6
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-mini-qspi.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP Mini Configuration
+ *
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "ZynqMP MINI QSPI";
+	compatible = "xlnx,zynqmp";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@fffc0000 {
+		device_type = "memory";
+		reg = <0x0 0xfffc0000 0x40000>;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
+	amba: amba {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		qspi: spi@ff0f0000 {
+			compatible = "xlnx,zynqmp-qspi-1.0";
+			status = "disabled";
+			clock-names = "ref_clk", "pclk";
+			clocks = <&misc_clk &misc_clk>;
+			num-cs = <1>;
+			reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		misc_clk: misc_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash0: flash@0 {
+		compatible = "n25q512a11", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-mini.dts b/roms/u-boot/arch/arm/dts/zynqmp-mini.dts
new file mode 100644
index 000000000..1faee9ec7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-mini.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP Mini Configuration
+ *
+ * (C) Copyright 2017, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "ZynqMP MINI";
+	compatible = "xlnx,zynqmp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &dcc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0xfffc0000 0x0 0x40000>, <0x0 0x0 0x0 0x80000000>;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
new file mode 100644
index 000000000..1f5201ac8
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "Versal System Controller on a2197 Processor Char board RevA"; /* Tenzing */
+	compatible = "xlnx,zynqmp-p-a2197-00-revA", "xlnx,zynqmp-a2197-revA",
+		     "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = <&eeprom>;
+		/* xlnx,fmc-eeprom = FIXME */
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	si5332_1: si5332_1 { /* clk0_sgmii - u142 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>; /* FIXME */
+	};
+
+	si5332_2: si5332_2 { /* clk1_usb - u142 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&sdhci0 { /* emmc MIO 13-23 - with some settings  16GB */
+	status = "okay";
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+};
+
+&uart0 { /* uart0 MIO38-39 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 { /* uart1 MIO40-41 */
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci1 { /* sd1 MIO45-51 cd in place */
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+};
+
+&psgtr {
+	status = "okay";
+	/* sgmii, usb3 */
+	clocks = <&si5332_1>, <&si5332_2>;
+	clock-names = "ref0", "ref1";
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii"; /* DTG generates this properly  1512 */
+	is-internal-pcspma;
+	/* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "", "", "", "", "", /* 0 - 4 */
+		  "", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */
+		  "DC_SYS_CTRL3", "DC_SYS_CTRL4", "DC_SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+		  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+		  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
+		  "", "", "", "", "", /* 25 - 29 */
+		  "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+		  "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+		  "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */
+		  "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
+		  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+		  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+		  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */
+		  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
+		  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
+		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
+		  "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */
+		  "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */
+		  "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
+		  "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */
+		  "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */
+		  "SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */
+		  "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */
+		  "SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */
+		  "SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */
+		  "SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */
+		  "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */
+		  "TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */
+		  "PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */
+		  "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+	status = "okay";
+	clock-frequency = <400000>;
+	i2c-mux@74 { /* u33 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+		i2c@0 { /* PMBUS1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* On connector J98 */
+			reg_vcc_fmc: tps544@7 { /* u80 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x7>;
+				regulator-name = "reg_vcc_fmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2600000>;
+				/* enable-gpio = <&gpio0 23 0x4>; optional */
+			};
+			reg_vcc_ram: tps544@8 { /* u83 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x8>;
+			};
+			reg_vcc_pslp: tps544@9 { /* u85 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x9>;
+			};
+			reg_vcc_psfp: tps544@a { /* u86 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0xa>;
+			};
+			reg_vccint: tps53681@60 { /* u70 - FIXME name - don't know what it does - also vcc_io_soc */
+				compatible = "ti,tps53681", "ti,tps53679";
+				reg = <0x60>;
+				/* vccint, vcc_io_soc */
+			};
+		};
+		i2c@1 { /* PMBUS1_INA226 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* FIXME check alerts coming to SC */
+			vcc_fmc: ina226@42 { /* u81 */
+				compatible = "ti,ina226";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			vcc_ram: ina226@43 { /* u82 */
+				compatible = "ti,ina226";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			vcc_pslp: ina226@44 { /* u84 */
+				compatible = "ti,ina226";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			vcc_psfp: ina226@45 { /* u87 */
+				compatible = "ti,ina226";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 { /* PMBUS2 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* On connector J104 */
+			reg_vccaus: tps544@d { /* u88 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0xd>;
+			};
+			reg_vccaux_fmc: tps544@e { /* u90 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0xe>;
+			};
+			reg_vcco_500: tps544@f { /* u93 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0xf>;
+			};
+			reg_vcco_501: tps544@10 { /* u95 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x10>;
+			};
+			reg_vcco_502: tps544@11 { /* u97 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x11>;
+			};
+			reg_vcco_503: tps544@12 { /* u99 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x12>;
+			};
+			reg_vcc1v8: tps544@13 { /* u101 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x13>;
+			};
+			reg_vcc3v3: tps544@14 { /* u102 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x14>;
+			};
+			reg_vcc1v2_ddr4: tps544@15 { /* u104 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x15>;
+			};
+			reg_vcc1v1_lp4: tps544@16 { /* u106 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x16>;
+			};
+			reg_vcc1_1V8_lp4: tps544@17 { /* u108 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x17>;
+			};
+			reg_vadj_fmc: tps544@19 { /* u109 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x19>;
+			};
+			reg_mgtyavcc: tps544@1a { /* u111 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x1a>;
+			};
+			reg_mgtyavtt: tps544@1b { /* u114 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x1b>;
+			};
+			reg_mgtyvccaux: tps544@1c { /* u115 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x1c>;
+			};
+			reg_util_1v13: tps544@1d { /* u117 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x1d>;
+			};
+			reg_util_1v8: tps544@1e { /* u118 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x1e>;
+			};
+			reg_util_2v5: tps544@1f { /* u119 - FIXME name - don't know what it does */
+				compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
+				reg = <0x1f>;
+			};
+		};
+		i2c@3 { /* PMBUS2_INA226 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* FIXME check alerts coming to SC */
+			vccaux: ina226@40 { /* u89 */
+				compatible = "ti,ina226";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			vccaux_fmc: ina226@41 { /* u91 */
+				compatible = "ti,ina226";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			vcco_500: ina226@42 { /* u92 */
+				compatible = "ti,ina226";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			vcco_501: ina226@43 { /* u94 */
+				compatible = "ti,ina226";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			vcco_502: ina226@44 { /* u96 */
+				compatible = "ti,ina226";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			vcco_503: ina226@45 { /* u98 */
+				compatible = "ti,ina226";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			vcc_1v8: ina226@46 { /* u100 */
+				compatible = "ti,ina226";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			vcc_3v3: ina226@47 { /* u103 */
+				compatible = "ti,ina226";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			vcc_1v2_ddr4: ina226@48 { /* u105 */
+				compatible = "ti,ina226";
+				reg = <0x48>;
+				shunt-resistor = <1000>;
+			};
+			vcc1v1_lp4: ina226@49 { /* u107 */
+				compatible = "ti,ina226";
+				reg = <0x49>;
+				shunt-resistor = <5000>;
+			};
+			vadj_fmc: ina226@4a { /* u110 */
+				compatible = "ti,ina226";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			mgtyavcc: ina226@4b { /* u112 */
+				compatible = "ti,ina226";
+				reg = <0x4b>;
+				shunt-resistor = <1000>;
+			};
+			mgtyavtt: ina226@4c { /* u113 */
+				compatible = "ti,ina226";
+				reg = <0x4c>;
+				shunt-resistor = <1000>;
+			};
+			mgtyvccaux: ina226@4d { /* u116 */
+				compatible = "ti,ina226";
+				reg = <0x4d>;
+				shunt-resistor = <5000>;
+			};
+			vcc_bat: ina226@4e { /* u12 */
+				compatible = "ti,ina226";
+				reg = <0x4e>;
+				shunt-resistor = <10000000>; /* 10 ohm */
+			};
+		};
+		i2c@4 { /* LP_I2C_SM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* connected to J212G */
+			/* zynqmp sm alert or samtec J212H */
+		};
+		/* 5-7 unused */
+	};
+};
+
+&i2c1 { /* i2c1 MIO 36-37 */
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Must be enabled via J242 */
+	eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	i2c-mux@74 { /* u35 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+		dc_i2c: i2c@0 { /* DC_I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom: eeprom@54 { /* u34 - m24128 16kB */
+				compatible = "st,24c128", "atmel,24c128";
+				reg = <0x54>;
+			};
+			si570_ref_clk: clock-generator@5d { /* u32 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;	/* 570JAC000900DG */
+				temperature-stability = <50>;
+				factory-fout = <33333333>;
+				clock-frequency = <33333333>;
+				clock-output-names = "ref_clk";
+				silabs,skip-recall;
+			};
+			/* Connection via Samtec J212D */
+			/* Use for storing information about X-PRC card */
+			x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */
+				compatible = "atmel,24c02";
+				reg = <0x52>;
+			};
+
+			/* Use for setting up certain features on X-PRC card */
+			x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */
+				compatible = "nxp,pca9534";
+				reg = <0x22>;
+				gpio-controller; /* IRQ not connected */
+				#gpio-cells = <2>;
+				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+						  "", "", "", "";
+				gtr_sel0 {
+					gpio-hog;
+					gpios = <0 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_1";
+				};
+				gtr_sel1 {
+					gpio-hog;
+					gpios = <1 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_2";
+				};
+				gtr_sel2 {
+					gpio-hog;
+					gpios = <2 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_3";
+				};
+				gtr_sel3 {
+					gpio-hog;
+					gpios = <3 0>;
+					input; /* FIXME add meaning */
+					line-name = "sw4_4";
+				};
+			};
+		};
+		i2c@1 { /* FMCP1_IIC */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* FIXME connection to Samtec J51C */
+			/* expected eeprom 0x50 SE cards */
+		};
+		i2c@2 { /* FMCP2_IIC */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* FIXME connection to Samtec J53C */
+			/* expected eeprom 0x50 SE cards */
+		};
+		i2c@3 { /* DDR4_DIMM1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_ddr_dimm1: clock-generator@60 { /* u2 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x60>;	/* 570BAB000299DG */
+				temperature-stability = <50>;
+				factory-fout = <200000000>;
+				clock-frequency = <200000000>;
+				clock-output-names = "si570_ddrdimm1_clk";
+			};
+			/* 0x50 SPD? */
+		};
+		i2c@4 { /* DDR4_DIMM2 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si570_ddr_dimm2: clock-generator@60 { /* u3 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x60>;	/* 570BAB000299DG */
+				temperature-stability = <50>;
+				factory-fout = <200000000>;
+				clock-frequency = <200000000>;
+				clock-output-names = "si570_ddrdimm2_clk";
+			};
+			/* 0x50 SPD? */
+		};
+		i2c@5 { /* LPDDR4_SI570_CLK */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			si570_lpddr4: clock-generator@60 { /* u4 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x60>;	/* 570BAB000299DG */
+				temperature-stability = <50>;
+				factory-fout = <200000000>;
+				clock-frequency = <200000000>;
+				clock-output-names = "si570_lpddr4_clk";
+			};
+		};
+		i2c@6 { /* HSDP_SI570 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			si570_hsdp: clock-generator@5d { /* u5 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;	/* 570JAC000900DG */
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "si570_hsdp_clk";
+			};
+		};
+		i2c@7 { /* PCIE_CLK */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* u36 0xd8 or 0xde - pcie clk buf - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */
+			/* u37 0xd0 DNP - pcie clocking 1 - 9FGV1006BQ505LTGI - PCIe GEN 4 CLOCK GENERATOR FIXME - no linux driver */
+			/* u38 0xca - pcie clocking 2 - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */
+			clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 - pcie clocking 3 */
+				#clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/
+				compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */
+				reg = <0xd8>;
+				/* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */
+				/* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */
+
+			};
+
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	maximum-speed = "super-speed";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
+};
+
+&usb1 {
+	status = "okay";
+	xlnx,usb-polarity = <0>;
+	xlnx,usb-reset-mode = <0>;
+};
+
+&dwc3_1 {
+	/delete-property/ phy-names ;
+	/delete-property/ phys ;
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+	snps,dis_u2_susphy_quirk ;
+	snps,dis_u3_susphy_quirk ;
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-r5.dts b/roms/u-boot/arch/arm/dts/zynqmp-r5.dts
new file mode 100644
index 000000000..a72172ef2
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-r5.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP R5
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,zynqmp-r5";
+	model = "Xilinx ZynqMP R5";
+
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-r5";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk100: clk100 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		u-boot,dm-pre-reloc;
+	};
+
+	amba {
+		u-boot,dm-pre-reloc;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ttc0: timer@ff110000 {
+			compatible = "cdns,ttc";
+			status = "okay";
+			reg = <0xff110000 0x1000>;
+			timer-width = <32>;
+			clocks = <&clk100>;
+		};
+
+		uart1: serial@ff010000 {
+			u-boot,dm-pre-reloc;
+			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			reg = <0xff010000 0x1000>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&clk100 &clk100>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
new file mode 100644
index 000000000..cad2d0572
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KV260 revA Carrier Card
+ *
+ * (C) Copyright 2020, Xilinx, Inc.
+ *
+ * SD level shifter:
+ * "A" – A01 board un-modified (NXP)
+ * "Y" – A01 board modified with legacy interposer (Nexperia)
+ * "Z" – A01 board modified with Diode interposer
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/net/ti-dp83867.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+/{
+	compatible = "xlnx,zynqmp-sk-kv260-revA",
+		     "xlnx,zynqmp-sk-kv260-revY",
+		     "xlnx,zynqmp-sk-kv260-revZ",
+		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
+
+	fragment1 {
+		target = <&i2c1>; /* I2C_SCK C23/C24 - MIO from SOM */
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+			pinctrl-1 = <&pinctrl_i2c1_gpio>;
+			scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+			sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+
+			u14: ina260@40 { /* u14 */
+				compatible = "ti,ina260";
+				#io-channel-cells = <1>;
+				label = "ina260-u14";
+				reg = <0x40>;
+			};
+			/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+		};
+	};
+
+	fragment1a {
+		target = <&amba>;
+		__overlay__ {
+			ina260-u14 {
+				compatible = "iio-hwmon";
+				io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+			};
+
+			si5332_0: si5332_0 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <125000000>;
+			};
+
+			si5332_1: si5332_1 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <25000000>;
+			};
+
+			si5332_2: si5332_2 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <48000000>;
+			};
+
+			si5332_3: si5332_3 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+			};
+
+			si5332_4: si5332_4 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <26000000>;
+			};
+
+			si5332_5: si5332_5 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <27000000>;
+			};
+		};
+	};
+
+/* DP/USB 3.0 and SATA */
+	fragment2 {
+		target = <&psgtr>;
+		__overlay__ {
+			status = "okay";
+			/* pcie, usb3, sata */
+			clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
+			clock-names = "ref0", "ref1", "ref2";
+		};
+	};
+
+	fragment3 {
+		target = <&sata>;
+		__overlay__ {
+			status = "okay";
+			/* SATA OOB timing settings */
+			ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+			ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+			ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+			ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+			ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+			ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+			ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+			ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+			phy-names = "sata-phy";
+			phys = <&psgtr 3 PHY_TYPE_SATA 1 2>;
+		};
+	};
+
+	fragment4 {
+		target = <&zynqmp_dpsub>;
+		__overlay__ {
+			status = "disabled";
+			phy-names = "dp-phy0", "dp-phy1";
+			phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
+		};
+	};
+
+	fragment9 {
+		target = <&zynqmp_dpdma>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment10 {
+		target = <&usb0>;
+		__overlay__ {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0_default>;
+			usbhub: usb5744 { /* u43 */
+				compatible = "microchip,usb5744";
+				reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+
+	fragment11 {
+		target = <&dwc3_0>;
+		__overlay__ {
+			status = "okay";
+			dr_mode = "host";
+			snps,usb3_lpm_capable;
+			phy-names = "usb3-phy";
+			phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
+			maximum-speed = "super-speed";
+		};
+	};
+
+	fragment12 {
+		target = <&sdhci1>; /* on CC with tuned parameters */
+		__overlay__ {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdhci1_default>;
+			/*
+			 * SD 3.0 requires level shifter and this property
+			 * should be removed if the board has level shifter and
+			 * need to work in UHS mode
+			 */
+			no-1-8-v;
+			disable-wp;
+			xlnx,mio-bank = <1>;
+		};
+	};
+
+	fragment13 {
+		target = <&gem3>; /* required by spec */
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_gem3_default>;
+			phy-handle = <&phy0>;
+			phy-mode = "rgmii-id";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+				reset-delay-us = <2>;
+
+				phy0: ethernet-phy@1 {
+					#phy-cells = <1>;
+					reg = <1>;
+					ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+					ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+					ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+					ti,dp83867-rxctrl-strap-quirk;
+				};
+			};
+		};
+	};
+
+	fragment14 {
+		target = <&pinctrl0>; /* required by spec */
+		__overlay__ {
+			status = "okay";
+
+			pinctrl_uart1_default: uart1-default {
+				conf {
+					groups = "uart1_9_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+					drive-strength = <12>;
+				};
+
+				conf-rx {
+					pins = "MIO37";
+					bias-high-impedance;
+				};
+
+				conf-tx {
+					pins = "MIO36";
+					bias-disable;
+				};
+
+				mux {
+					groups = "uart1_9_grp";
+					function = "uart1";
+				};
+			};
+
+			pinctrl_i2c1_default: i2c1-default {
+				conf {
+					groups = "i2c1_6_grp";
+					bias-pull-up;
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				mux {
+					groups = "i2c1_6_grp";
+					function = "i2c1";
+				};
+			};
+
+			pinctrl_i2c1_gpio: i2c1-gpio {
+				conf {
+					groups = "gpio0_24_grp", "gpio0_25_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				mux {
+					groups = "gpio0_24_grp", "gpio0_25_grp";
+					function = "gpio0";
+				};
+			};
+
+			pinctrl_gem3_default: gem3-default {
+				conf {
+					groups = "ethernet3_0_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				conf-rx {
+					pins = "MIO70", "MIO72", "MIO74";
+					bias-high-impedance;
+					low-power-disable;
+				};
+
+				conf-bootstrap {
+					pins = "MIO71", "MIO73", "MIO75";
+					bias-disable;
+					low-power-disable;
+				};
+
+				conf-tx {
+					pins = "MIO64", "MIO65", "MIO66",
+					       "MIO67", "MIO68", "MIO69";
+					bias-disable;
+					low-power-enable;
+				};
+
+				conf-mdio {
+					groups = "mdio3_0_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+					bias-disable;
+				};
+
+				mux-mdio {
+					function = "mdio3";
+					groups = "mdio3_0_grp";
+				};
+
+				mux {
+					function = "ethernet3";
+					groups = "ethernet3_0_grp";
+				};
+			};
+
+			pinctrl_usb0_default: usb0-default {
+				conf {
+					groups = "usb0_0_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				conf-rx {
+					pins = "MIO52", "MIO53", "MIO55";
+					bias-high-impedance;
+				};
+
+				conf-tx {
+					pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+					"MIO60", "MIO61", "MIO62", "MIO63";
+					bias-disable;
+				};
+
+				mux {
+					groups = "usb0_0_grp";
+					function = "usb0";
+				};
+			};
+
+			pinctrl_sdhci1_default: sdhci1-default {
+				conf {
+					groups = "sdio1_0_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+					bias-disable;
+				};
+
+				conf-cd {
+					groups = "sdio1_cd_0_grp";
+					bias-high-impedance;
+					bias-pull-up;
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				mux-cd {
+					groups = "sdio1_cd_0_grp";
+					function = "sdio1_cd";
+				};
+
+				mux {
+					groups = "sdio1_0_grp";
+					function = "sdio1";
+				};
+			};
+		};
+	};
+	fragment15 {
+		target = <&uart1>;
+		__overlay__ {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1_default>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/roms/u-boot/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
new file mode 100644
index 000000000..6e46f5717
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KV260 revA Carrier Card
+ *
+ * (C) Copyright 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/net/ti-dp83867.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+/{
+	compatible = "xlnx,zynqmp-sk-kv260-rev1",
+		     "xlnx,zynqmp-sk-kv260-revB", "xlnx,zynqmp-sk-kv260-revA",
+		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
+
+	fragment1 {
+		target = <&i2c1>; /* I2C_SCK C23/C24 - MIO from SOM */
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+			pinctrl-1 = <&pinctrl_i2c1_gpio>;
+			scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+			sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+
+			u14: ina260@40 { /* u14 */
+				compatible = "ti,ina260";
+				#io-channel-cells = <1>;
+				label = "ina260-u14";
+				reg = <0x40>;
+			};
+			usbhub: usb5744@2d { /* u43 */
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+				reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+			};
+			/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+		};
+	};
+
+	fragment1a {
+		target = <&amba>;
+		__overlay__ {
+			ina260-u14 {
+				compatible = "iio-hwmon";
+				io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+			};
+
+			si5332_0: si5332_0 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <125000000>;
+			};
+
+			si5332_1: si5332_1 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <25000000>;
+			};
+
+			si5332_2: si5332_2 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <48000000>;
+			};
+
+			si5332_3: si5332_3 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+			};
+
+			si5332_4: si5332_4 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <26000000>;
+			};
+
+			si5332_5: si5332_5 { /* u17 */
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <27000000>;
+			};
+		};
+	};
+
+/* DP/USB 3.0 */
+	fragment2 {
+		target = <&psgtr>;
+		__overlay__ {
+			status = "okay";
+			/* pcie, usb3, sata */
+			clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
+			clock-names = "ref0", "ref1", "ref2";
+		};
+	};
+
+	fragment4 {
+		target = <&zynqmp_dpsub>;
+		__overlay__ {
+			status = "disabled";
+			phy-names = "dp-phy0", "dp-phy1";
+			phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
+		};
+	};
+
+	fragment9 {
+		target = <&zynqmp_dpdma>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment10 {
+		target = <&usb0>;
+		__overlay__ {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0_default>;
+		};
+	};
+
+	fragment11 {
+		target = <&dwc3_0>;
+		__overlay__ {
+			status = "okay";
+			dr_mode = "host";
+			snps,usb3_lpm_capable;
+			phy-names = "usb3-phy";
+			phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
+			maximum-speed = "super-speed";
+		};
+	};
+
+	fragment12 {
+		target = <&sdhci1>; /* on CC with tuned parameters */
+		__overlay__ {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdhci1_default>;
+			/*
+			 * SD 3.0 requires level shifter and this property
+			 * should be removed if the board has level shifter and
+			 * need to work in UHS mode
+			 */
+			no-1-8-v;
+			disable-wp;
+			xlnx,mio-bank = <1>;
+			clk-phase-sd-hs = <126>, <60>;
+			clk-phase-uhs-sdr25 = <120>, <60>;
+			clk-phase-uhs-ddr50 = <126>, <48>;
+		};
+	};
+
+	fragment13 {
+		target = <&gem3>; /* required by spec */
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_gem3_default>;
+			phy-handle = <&phy0>;
+			phy-mode = "rgmii-id";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+				reset-delay-us = <2>;
+
+				phy0: ethernet-phy@1 {
+					#phy-cells = <1>;
+					reg = <1>;
+					ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+					ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+					ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+					ti,dp83867-rxctrl-strap-quirk;
+				};
+			};
+		};
+	};
+
+	fragment14 {
+		target = <&pinctrl0>; /* required by spec */
+		__overlay__ {
+			status = "okay";
+
+			pinctrl_uart1_default: uart1-default {
+				conf {
+					groups = "uart1_9_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+					drive-strength = <12>;
+				};
+
+				conf-rx {
+					pins = "MIO37";
+					bias-high-impedance;
+				};
+
+				conf-tx {
+					pins = "MIO36";
+					bias-disable;
+				};
+
+				mux {
+					groups = "uart1_9_grp";
+					function = "uart1";
+				};
+			};
+
+			pinctrl_i2c1_default: i2c1-default {
+				conf {
+					groups = "i2c1_6_grp";
+					bias-pull-up;
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				mux {
+					groups = "i2c1_6_grp";
+					function = "i2c1";
+				};
+			};
+
+			pinctrl_i2c1_gpio: i2c1-gpio {
+				conf {
+					groups = "gpio0_24_grp", "gpio0_25_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				mux {
+					groups = "gpio0_24_grp", "gpio0_25_grp";
+					function = "gpio0";
+				};
+			};
+
+			pinctrl_gem3_default: gem3-default {
+				conf {
+					groups = "ethernet3_0_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				conf-rx {
+					pins = "MIO70", "MIO72", "MIO74";
+					bias-high-impedance;
+					low-power-disable;
+				};
+
+				conf-bootstrap {
+					pins = "MIO71", "MIO73", "MIO75";
+					bias-disable;
+					low-power-disable;
+				};
+
+				conf-tx {
+					pins = "MIO64", "MIO65", "MIO66",
+					       "MIO67", "MIO68", "MIO69";
+					bias-disable;
+					low-power-enable;
+				};
+
+				conf-mdio {
+					groups = "mdio3_0_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+					bias-disable;
+				};
+
+				mux-mdio {
+					function = "mdio3";
+					groups = "mdio3_0_grp";
+				};
+
+				mux {
+					function = "ethernet3";
+					groups = "ethernet3_0_grp";
+				};
+			};
+
+			pinctrl_usb0_default: usb0-default {
+				conf {
+					groups = "usb0_0_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				conf-rx {
+					pins = "MIO52", "MIO53", "MIO55";
+					bias-high-impedance;
+				};
+
+				conf-tx {
+					pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+					"MIO60", "MIO61", "MIO62", "MIO63";
+					bias-disable;
+				};
+
+				mux {
+					groups = "usb0_0_grp";
+					function = "usb0";
+				};
+			};
+
+			pinctrl_sdhci1_default: sdhci1-default {
+				conf {
+					groups = "sdio1_0_grp";
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+					bias-disable;
+				};
+
+				conf-cd {
+					groups = "sdio1_cd_0_grp";
+					bias-high-impedance;
+					bias-pull-up;
+					slew-rate = <SLEW_RATE_SLOW>;
+					power-source = <IO_STANDARD_LVCMOS18>;
+				};
+
+				mux-cd {
+					groups = "sdio1_cd_0_grp";
+					function = "sdio1_cd";
+				};
+
+				mux {
+					groups = "sdio1_0_grp";
+					function = "sdio1";
+				};
+			};
+		};
+	};
+	fragment15 {
+		target = <&uart1>;
+		__overlay__ {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1_default>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi b/roms/u-boot/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
new file mode 100644
index 000000000..3f01233cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP K26/KV260 SD wiring
+ *
+ * (C) Copyright 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci1 { /* on CC - MIO 39 - 51 */
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	broken-cd;
+	xlnx,mio-bank = <1>;
+	/* Do not run SD in HS mode from bootloader */
+	sdhci-caps-mask = <0 0x200000>;
+	sdhci-caps = <0 0>;
+	max-frequency = <19000000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-sm-k26-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-sm-k26-revA.dts
new file mode 100644
index 000000000..e4cf382a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-sm-k26-revA.dts
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SM-K26 rev1/B/A
+ *
+ * (C) Copyright 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP SM-K26 Rev1/B/A";
+	compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB",
+		     "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26",
+		     "xlnx,zynqmp";
+
+	aliases {
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		spi1 = &spi0;
+		spi2 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		nvmem0 = &eeprom;
+		nvmem1 = &eeprom_cc;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory"; /* 4GB */
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		fwuen {
+			label = "fwuen";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ds35 {
+			label = "heartbeat";
+			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds36 {
+			label = "vbus_det";
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	ams {
+		compatible = "iio-hwmon";
+		io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
+			<&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
+			<&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
+			<&xilinx_ams 9>, <&xilinx_ams 10>, <&xilinx_ams 11>,
+			<&xilinx_ams 12>, <&xilinx_ams 13>, <&xilinx_ams 14>,
+			<&xilinx_ams 15>, <&xilinx_ams 16>, <&xilinx_ams 17>,
+			<&xilinx_ams 18>, <&xilinx_ams 19>, <&xilinx_ams 20>,
+			<&xilinx_ams 21>, <&xilinx_ams 22>, <&xilinx_ams 23>,
+			<&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>,
+			<&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>;
+	};
+};
+
+&uart1 { /* MIO36/MIO37 */
+	status = "okay";
+};
+
+&qspi { /* MIO 0-5 - U143 */
+	status = "okay";
+	flash@0 { /* MT25QU512A */
+		compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>; /* 40MHz */
+		partition@0 {
+			label = "Image Selector";
+			reg = <0x0 0x80000>; /* 512KB */
+			read-only;
+			lock;
+		};
+		partition@80000 {
+			label = "Image Selector Golden";
+			reg = <0x80000 0x80000>; /* 512KB */
+			read-only;
+			lock;
+		};
+		partition@100000 {
+			label = "Persistent Register";
+			reg = <0x100000 0x20000>; /* 128KB */
+		};
+		partition@120000 {
+			label = "Persistent Register Backup";
+			reg = <0x120000 0x20000>; /* 128KB */
+		};
+		partition@140000 {
+			label = "Open_1";
+			reg = <0x140000 0xC0000>; /* 768KB */
+		};
+		partition@200000 {
+			label = "Image A (FSBL, PMU, ATF, U-Boot)";
+			reg = <0x200000 0xD00000>; /* 13MB */
+		};
+		partition@f00000 {
+			label = "ImgSel Image A Catch";
+			reg = <0xF00000 0x80000>; /* 512KB */
+			read-only;
+			lock;
+		};
+		partition@f80000 {
+			label = "Image B (FSBL, PMU, ATF, U-Boot)";
+			reg = <0xF80000 0xD00000>; /* 13MB */
+		};
+		partition@1c80000 {
+			label = "ImgSel Image B Catch";
+			reg = <0x1C80000 0x80000>; /* 512KB */
+			read-only;
+			lock;
+		};
+		partition@1d00000 {
+			label = "Open_2";
+			reg = <0x1D00000 0x100000>; /* 1MB */
+		};
+		partition@1e00000 {
+			label = "Recovery Image";
+			reg = <0x1E00000 0x200000>; /* 2MB */
+			read-only;
+			lock;
+		};
+		partition@2000000 {
+			label = "Recovery Image Backup";
+			reg = <0x2000000 0x200000>; /* 2MB */
+			read-only;
+			lock;
+		};
+		partition@2200000 {
+			label = "U-Boot storage variables";
+			reg = <0x2200000 0x20000>; /* 128KB */
+		};
+		partition@2220000 {
+			label = "U-Boot storage variables backup";
+			reg = <0x2220000 0x20000>; /* 128KB */
+		};
+		partition@2240000 {
+			label = "SHA256";
+			reg = <0x2240000 0x10000>; /* 256B but 64KB sector */
+			read-only;
+			lock;
+		};
+		partition@2250000 {
+			label = "User";
+			reg = <0x2250000 0x1db0000>; /* 29.5 MB */
+		};
+	};
+};
+
+&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A*/
+	status = "okay";
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+};
+
+&spi1 { /* MIO6, 9-11 */
+	status = "okay";
+	label = "TPM";
+	num-cs = <1>;
+	tpm@0 { /* slm9670 - U144 */
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+
+	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
+		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
+		reg = <0x50>;
+		/* WP pin EE_WP_EN connected to slg7x644092@68 */
+	};
+
+	eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
+		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
+		reg = <0x51>;
+	};
+
+	/* da9062@30 - u170 - also at address 0x31 */
+	/* da9131@33 - u167 */
+	da9131: pmic@33 {
+		compatible = "dlg,da9131";
+		reg = <0x33>;
+		regulators {
+			da9131_buck1: buck1 {
+				regulator-name = "da9131_buck1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			da9131_buck2: buck2 {
+				regulator-name = "da9131_buck2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* da9130@32 - u166 */
+	da9130: pmic@32 {
+		compatible = "dlg,da9130";
+		reg = <0x32>;
+		regulators {
+			da9130_buck1: buck1 {
+				regulator-name = "da9130_buck1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */
+	/*
+	 * stdp4320 - u27 FW has below two issues to be fixed in next board revision.
+	 * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76.
+	 * Address conflict with slg7x644091@70 making both the devices NOT accessible.
+	 * With the FW fix, stdp4320 should respond to address 0x73 only.
+	 */
+	/* slg7x644092@68 - u169 */
+	/* Also connected via JA1C as C23/C24 */
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
+			  "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */
+			  "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+			  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+			  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */
+			  "I2C1_SDA", "", "", "", "", /* 25 - 29 */
+			  "", "", "", "", "", /* 30 - 34 */
+			  "", "", "", "", "", /* 35 - 39 */
+			  "", "", "", "", "", /* 40 - 44 */
+			  "", "", "", "", "", /* 45 - 49 */
+			  "", "", "", "", "", /* 50 - 54 */
+			  "", "", "", "", "", /* 55 - 59 */
+			  "", "", "", "", "", /* 60 - 64 */
+			  "", "", "", "", "", /* 65 - 69 */
+			  "", "", "", "", "", /* 70 - 74 */
+			  "", "", "", /* 75 - 77, MIO end and EMIO start */
+			  "", "", /* 78 - 79 */
+			  "", "", "", "", "", /* 80 - 84 */
+			  "", "", "", "", "", /* 85 - 89 */
+			  "", "", "", "", "", /* 90 - 94 */
+			  "", "", "", "", "", /* 95 - 99 */
+			  "", "", "", "", "", /* 100 - 104 */
+			  "", "", "", "", "", /* 105 - 109 */
+			  "", "", "", "", "", /* 110 - 114 */
+			  "", "", "", "", "", /* 115 - 119 */
+			  "", "", "", "", "", /* 120 - 124 */
+			  "", "", "", "", "", /* 125 - 129 */
+			  "", "", "", "", "", /* 130 - 134 */
+			  "", "", "", "", "", /* 135 - 139 */
+			  "", "", "", "", "", /* 140 - 144 */
+			  "", "", "", "", "", /* 145 - 149 */
+			  "", "", "", "", "", /* 150 - 154 */
+			  "", "", "", "", "", /* 155 - 159 */
+			  "", "", "", "", "", /* 160 - 164 */
+			  "", "", "", "", "", /* 165 - 169 */
+			  "", "", "", ""; /* 170 - 174 */
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi b/roms/u-boot/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
new file mode 100644
index 000000000..8e9106792
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP Z2-VSOM
+ *
+ * (C) Copyright 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci1 { /* FIXME - on CC - MIO 39 - 51 */
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	broken-cd;
+	xlnx,mio-bank = <1>;
+	/* Do not run SD in HS mode from bootloader */
+	sdhci-caps-mask = <0 0x200000>;
+	sdhci-caps = <0 0>;
+	max-frequency = <19000000>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-smk-k26-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-smk-k26-revA.dts
new file mode 100644
index 000000000..300edc880
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-smk-k26-revA.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A
+ *
+ * (C) Copyright 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include "zynqmp-sm-k26-revA.dts"
+
+/ {
+	model = "ZynqMP SMK-K26 Rev1/B/A";
+	compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB",
+		     "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26",
+		     "xlnx,zynqmp";
+};
+
+&sdhci0 {
+	status = "disabled";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts b/roms/u-boot/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
new file mode 100644
index 000000000..a377f27c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Topic XDP (Xilinx Drone Platform)
+ *
+ * (C) Copyright 2016, Topic Embedded Products BV
+ * Mike Looijmans <mike.looijmans@topic.nl>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "Topic Miamimp ZynqMP XDP v1r1";
+	compatible = "topic,miamimp-xdp-v1r1", "topic,miamimp-xdp",
+		     "topic,miamimp", "xlnx,zynqmp";
+
+	aliases {
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "st,m25p80", "n25q256a";
+		m25p,fast-read;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <166000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		is-dual = <1>;
+		partition@0 {
+			label = "qspi-boot-bin";
+			reg = <0x00000 0x60000>;
+		};
+		partition@60000 {
+			label = "qspi-u-boot-itb";
+			reg = <0x60000 0x100000>;
+		};
+		partition@160000 {
+			label = "qspi-u-boot-env";
+			reg = <0x160000 0x20000>;
+		};
+		partition@200000 {
+			label = "qspi-rootfs";
+			reg = <0x200000 0x1e00000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+/* eMMC device */
+&sdhci0 {
+	status = "okay";
+	non-removable;
+	disable-wp; /* We don't have a write-protect detection */
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	xlnx,mio-bank = <1>;
+	disable-wp; /* We don't have a write-protect detection */
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zc1232-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zc1232-revA.dts
new file mode 100644
index 000000000..ef7cf0a36
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zc1232-revA.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZC1232
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZC1232 RevA";
+	compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB FIXME */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zc1254-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zc1254-revA.dts
new file mode 100644
index 000000000..9cc1c0c6c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zc1254-revA.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZC1254
+ *
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZC1254 RevA";
+	compatible = "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254", "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
new file mode 100644
index 000000000..039a8da1a
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm015-dc1
+ *
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm015-dc1 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	clock_si5338_0: clk27 {	/* u55 SI5338-GM */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	clock_si5338_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_si5338_3: clk150 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <150000000>;
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* dp, usb3, sata */
+	clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+
+	eeprom: eeprom@55 {
+		compatible = "atmel,24c64"; /* 24AA64 */
+		reg = <0x55>;
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_9_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_9_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_36_grp", "gpio0_37_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_36_grp", "gpio0_37_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_8_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_8_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO34";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO35";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio0_wp_0_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "sdio0_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_38_grp";
+		};
+
+		conf {
+			groups = "gpio0_38_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
+};
+
+/* eMMC */
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+};
+
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
new file mode 100644
index 000000000..d6e924803
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -0,0 +1,553 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm016-dc2 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		ethernet0 = &gem2;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem2 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem2_default>;
+	phy0: ethernet-phy@5 {
+		reg = <5>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+
+	tca6416_u26: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* IRQ not connected */
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&nand0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand0_default>;
+	arasan,has-mdma;
+
+	nand@0 {
+		reg = <0x0>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-0";
+
+		partition@0 {	/* for testing purpose */
+			label = "nand-fsbl-uboot";
+			reg = <0x0 0x0 0x400000>;
+		};
+		partition@1 {	/* for testing purpose */
+			label = "nand-linux";
+			reg = <0x0 0x400000 0x1400000>;
+		};
+		partition@2 {	/* for testing purpose */
+			label = "nand-device-tree";
+			reg = <0x0 0x1800000 0x400000>;
+		};
+		partition@3 {	/* for testing purpose */
+			label = "nand-rootfs";
+			reg = <0x0 0x1c00000 0x1400000>;
+		};
+		partition@4 {	/* for testing purpose */
+			label = "nand-bitstream";
+			reg = <0x0 0x3000000 0x400000>;
+		};
+		partition@5 {	/* for testing purpose */
+			label = "nand-misc";
+			reg = <0x0 0x3400000 0xfcc00000>;
+		};
+	};
+	nand@1 {
+		reg = <0x1>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-1";
+
+		partition@0 {	/* for testing purpose */
+			label = "nand1-fsbl-uboot";
+			reg = <0x0 0x0 0x400000>;
+		};
+		partition@1 {	/* for testing purpose */
+			label = "nand1-linux";
+			reg = <0x0 0x400000 0x1400000>;
+		};
+		partition@2 {	/* for testing purpose */
+			label = "nand1-device-tree";
+			reg = <0x0 0x1800000 0x400000>;
+		};
+		partition@3 {	/* for testing purpose */
+			label = "nand1-rootfs";
+			reg = <0x0 0x1c00000 0x1400000>;
+		};
+		partition@4 {	/* for testing purpose */
+			label = "nand1-bitstream";
+			reg = <0x0 0x3000000 0x400000>;
+		};
+		partition@5 {	/* for testing purpose */
+			label = "nand1-misc";
+			reg = <0x0 0x3400000 0xfcc00000>;
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO38";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO39";
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_8_grp";
+		};
+
+		conf {
+			groups = "can1_8_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO33";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO32";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_1_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_1_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_6_grp", "gpio0_7_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_6_grp", "gpio0_7_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_10_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_10_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO42";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO43";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO41";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO40";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+
+		conf {
+			groups = "usb1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			       "MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem2_default: gem2-default {
+		mux {
+			function = "ethernet2";
+			groups = "ethernet2_0_grp";
+		};
+
+		conf {
+			groups = "ethernet2_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62",
+									"MIO63";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56",
+									"MIO57";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio2";
+			groups = "mdio2_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio2_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_nand0_default: nand0-default {
+		mux {
+			groups = "nand0_0_grp";
+			function = "nand0";
+		};
+
+		conf {
+			groups = "nand0_0_grp";
+			bias-pull-up;
+		};
+
+		mux-ce {
+			groups = "nand0_ce_0_grp";
+			function = "nand0_ce";
+		};
+
+		conf-ce {
+			groups = "nand0_ce_0_grp";
+			bias-pull-up;
+		};
+
+		mux-rb {
+			groups = "nand0_rb_0_grp";
+			function = "nand0_rb";
+		};
+
+		conf-rb {
+			groups = "nand0_rb_0_grp";
+			bias-pull-up;
+		};
+
+		mux-dqs {
+			groups = "nand0_dqs_0_grp";
+			function = "nand0_dqs";
+		};
+
+		conf-dqs {
+			groups = "nand0_dqs_0_grp";
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spi0_default: spi0-default {
+		mux {
+			groups = "spi0_0_grp";
+			function = "spi0";
+		};
+
+		conf {
+			groups = "spi0_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi0_ss_0_grp", "spi0_ss_1_grp",
+							"spi0_ss_2_grp";
+			function = "spi0_ss";
+		};
+
+		conf-cs {
+			groups = "spi0_ss_0_grp", "spi0_ss_1_grp",
+							"spi0_ss_2_grp";
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		mux {
+			groups = "spi1_3_grp";
+			function = "spi1";
+		};
+
+		conf {
+			groups = "spi1_3_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi1_ss_9_grp", "spi1_ss_10_grp",
+							"spi1_ss_11_grp";
+			function = "spi1_ss";
+		};
+
+		conf-cs {
+			groups = "spi1_ss_9_grp", "spi1_ss_10_grp",
+							"spi1_ss_11_grp";
+			bias-disable;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+
+	spi0_flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25wf080", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "spi0-data";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	spi1_flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "spi1-data";
+			reg = <0x0 0x84000>;
+		};
+	};
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
new file mode 100644
index 000000000..c7de59e1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm017-dc3
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP zc1751-xm017-dc3 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: ethernet-phy@0 { /* VSC8211 */
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+/* just eeprom here */
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416_u26: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* IRQ not connected */
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+/* eeprom24c02 and SE98A temp chip pca9306 */
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+/* MT29F64G08AECDBJ4-6 */
+&nand0 {
+	status = "okay";
+	arasan,has-mdma;
+	num-cs = <2>;
+
+	partition@0 {	/* for testing purpose */
+		label = "nand-fsbl-uboot";
+		reg = <0x0 0x0 0x400000>;
+	};
+	partition@1 {	/* for testing purpose */
+		label = "nand-linux";
+		reg = <0x0 0x400000 0x1400000>;
+	};
+	partition@2 {	/* for testing purpose */
+		label = "nand-device-tree";
+		reg = <0x0 0x1800000 0x400000>;
+	};
+	partition@3 {	/* for testing purpose */
+		label = "nand-rootfs";
+		reg = <0x0 0x1C00000 0x1400000>;
+	};
+	partition@4 {	/* for testing purpose */
+		label = "nand-bitstream";
+		reg = <0x0 0x3000000 0x400000>;
+	};
+	partition@5 {	/* for testing purpose */
+		label = "nand-misc";
+		reg = <0x0 0x3400000 0xFCC00000>;
+	};
+
+	partition@6 {	/* for testing purpose */
+		label = "nand1-fsbl-uboot";
+		reg = <0x1 0x0 0x400000>;
+	};
+	partition@7 {	/* for testing purpose */
+		label = "nand1-linux";
+		reg = <0x1 0x400000 0x1400000>;
+	};
+	partition@8 {	/* for testing purpose */
+		label = "nand1-device-tree";
+		reg = <0x1 0x1800000 0x400000>;
+	};
+	partition@9 {	/* for testing purpose */
+		label = "nand1-rootfs";
+		reg = <0x1 0x1C00000 0x1400000>;
+	};
+	partition@10 {	/* for testing purpose */
+		label = "nand1-bitstream";
+		reg = <0x1 0x3000000 0x400000>;
+	};
+	partition@11 {	/* for testing purpose */
+		label = "nand1-misc";
+		reg = <0x1 0x3400000 0xFCC00000>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+&sdhci1 { /* emmc with some settings */
+	status = "okay";
+};
+
+/* main */
+&uart0 {
+	status = "okay";
+};
+
+/* DB9 */
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
new file mode 100644
index 000000000..aadda179c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm018-dc4
+ *
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP zc1751-xm018-dc4";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		ethernet0 = &gem0;
+		ethernet1 = &gem1;
+		ethernet2 = &gem2;
+		ethernet3 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&lpd_dma_chan1 {
+	status = "okay";
+};
+
+&lpd_dma_chan2 {
+	status = "okay";
+};
+
+&lpd_dma_chan3 {
+	status = "okay";
+};
+
+&lpd_dma_chan4 {
+	status = "okay";
+};
+
+&lpd_dma_chan5 {
+	status = "okay";
+};
+
+&lpd_dma_chan6 {
+	status = "okay";
+};
+
+&lpd_dma_chan7 {
+	status = "okay";
+};
+
+&lpd_dma_chan8 {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+		reg = <0>;
+	};
+	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+		reg = <7>;
+	};
+	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+		reg = <3>;
+	};
+	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+		reg = <8>;
+	};
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy7>;
+};
+
+&gem2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy3>;
+};
+
+&gem3 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy8>;
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
new file mode 100644
index 000000000..46b27a000
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -0,0 +1,454 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm019-dc5
+ *
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm019-dc5 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem1;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>;
+
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_18_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_18_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_74_grp", "gpio0_75_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_74_grp", "gpio0_75_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_19_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_19_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_76_grp", "gpio0_77_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_76_grp", "gpio0_77_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_17_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO71";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_18_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_18_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO73";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO72";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO44", "MIO45", "MIO46", "MIO47", "MIO48",
+									"MIO49";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40", "MIO41", "MIO42",
+									"MIO43";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio0_wp_0_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "sdio0_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_watchdog0_default: watchdog0-default {
+		mux-clk {
+			groups = "swdt0_clk_1_grp";
+			function = "swdt0_clk";
+		};
+
+		conf-clk {
+			groups = "swdt0_clk_1_grp";
+			bias-pull-up;
+		};
+
+		mux-rst {
+			groups = "swdt0_rst_1_grp";
+			function = "swdt0_rst";
+		};
+
+		conf-rst {
+			groups = "swdt0_rst_1_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc0_default: ttc0-default {
+		mux-clk {
+			groups = "ttc0_clk_0_grp";
+			function = "ttc0_clk";
+		};
+
+		conf-clk {
+			groups = "ttc0_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc0_wav_0_grp";
+			function = "ttc0_wav";
+		};
+
+		conf-wav {
+			groups = "ttc0_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc1_default: ttc1-default {
+		mux-clk {
+			groups = "ttc1_clk_0_grp";
+			function = "ttc1_clk";
+		};
+
+		conf-clk {
+			groups = "ttc1_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc1_wav_0_grp";
+			function = "ttc1_wav";
+		};
+
+		conf-wav {
+			groups = "ttc1_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc2_default: ttc2-default {
+		mux-clk {
+			groups = "ttc2_clk_0_grp";
+			function = "ttc2_clk";
+		};
+
+		conf-clk {
+			groups = "ttc2_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc2_wav_0_grp";
+			function = "ttc2_wav";
+		};
+
+		conf-wav {
+			groups = "ttc2_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc3_default: ttc3-default {
+		mux-clk {
+			groups = "ttc3_clk_0_grp";
+			function = "ttc3_clk";
+		};
+
+		conf-clk {
+			groups = "ttc3_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc3_wav_0_grp";
+			function = "ttc3_wav";
+		};
+
+		conf-wav {
+			groups = "ttc3_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	no-1-8-v;
+	xlnx,mio-bank = <0>;
+};
+
+&ttc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc0_default>;
+};
+
+&ttc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc1_default>;
+};
+
+&ttc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc2_default>;
+};
+
+&ttc3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc3_default>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&watchdog0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_watchdog0_default>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu100-revC.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu100-revC.dts
new file mode 100644
index 000000000..b83696ccc
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU100 revC
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Nathalie Chan King Choy
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU100 RevC";
+	compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp";
+
+	aliases {
+		gpio0 = &gpio;
+		i2c0 = &i2c1;
+		rtc0 = &rtc;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &dcc;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		sw4 {
+			label = "sw4";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
+			      <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
+			      <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
+			      <&xilinx_ams 9>, <&xilinx_ams 10>,
+			      <&xilinx_ams 11>, <&xilinx_ams 12>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-ds2 {
+			label = "ds2";
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-ds3 {
+			label = "ds3";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx"; /* WLAN tx */
+			default-state = "off";
+		};
+
+		led-ds4 {
+			label = "ds4";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0rx"; /* WLAN rx */
+			default-state = "off";
+		};
+
+		led-ds5 {
+			label = "ds5";
+			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+		};
+
+		vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
+			label = "vbus_det";
+			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	ltc2954: ltc2954 { /* U7 */
+		compatible = "lltc,ltc2954", "lltc,ltc2952";
+		status = "disabled";
+		trigger-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; /* INT line - input */
+		/* If there is HW watchdog on mezzanine this signal should be connected there */
+		watchdog-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; /* MIO on PAD */
+		kill-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; /* KILL signal - output */
+	};
+
+	wmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "wmmcsdio_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		post-power-on-delay-ms = <10>;
+	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+	};
+
+	si5335a_0: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5335a_1: clk27 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL",
+			  "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS",
+			  "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
+			  "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1",
+			  "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT",
+			  "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE",
+			  "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL",
+			  "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C",
+			  "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E",
+			  "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3",
+			  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2",
+			  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3",
+			  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK",
+			  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1",
+			  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6",
+			  "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */
+			  "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <100000>;
+	i2c-mux@75 { /* u11 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2csw_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			label = "LS-I2C0";
+		};
+		i2csw_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			label = "LS-I2C1";
+		};
+		i2csw_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			label = "HS-I2C2";
+		};
+		i2csw_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			label = "HS-I2C3";
+		};
+		i2csw_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pmic: pmic@5e { /* Custom TI PMIC u33 */
+				compatible = "ti,tps65086";
+				reg = <0x5e>;
+				interrupt-parent = <&gpio>;
+				interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+		i2csw_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* PS_PMBUS */
+			u35: ina226@40 { /* u35 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				reg = <0x40>;
+				shunt-resistor = <10000>;
+				/* MIO31 is alert which should be routed to PMUFW */
+			};
+		};
+		i2csw_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/*
+			 * Not Connected
+			 */
+		};
+		i2csw_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/*
+			 * usb5744 (DNP) - U5
+			 * 100kHz - this is default freq for us
+			 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_1_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_1_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_4_grp", "gpio0_5_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_4_grp", "gpio0_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_3_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_3_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_2_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_2_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi0_default: spi0-default {
+		mux {
+			groups = "spi0_3_grp";
+			function = "spi0";
+		};
+
+		conf {
+			groups = "spi0_3_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi0_ss_9_grp";
+			function = "spi0_ss";
+		};
+
+		conf-cs {
+			groups = "spi0_ss_9_grp";
+			bias-disable;
+		};
+
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		mux {
+			groups = "spi1_0_grp";
+			function = "spi1";
+		};
+
+		conf {
+			groups = "spi1_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi1_ss_0_grp";
+			function = "spi1_ss";
+		};
+
+		conf-cs {
+			groups = "spi1_ss_0_grp";
+			bias-disable;
+		};
+
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_0_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO3";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO2";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_0_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO1";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO0";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+
+		conf {
+			groups = "usb1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			       "MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* usb3, dps */
+	clocks = <&si5335a_0>, <&si5335a_1>;
+	clock-names = "ref0", "ref1";
+};
+
+&rtc {
+	status = "okay";
+};
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci0 {
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	xlnx,mio-bank = <0>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <0>;
+	non-removable;
+	disable-wp;
+	cap-power-off-card;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vqmmc-supply = <&wmmcsdio_fixed>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wifi@2 {
+		compatible = "ti,wl1831";
+		reg = <2>;
+		interrupt-parent = <&gpio>;
+		interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */
+	};
+};
+
+&spi0 { /* Low Speed connector */
+	status = "okay";
+	label = "LS-SPI0";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+};
+
+&spi1 { /* High Speed connector */
+	status = "okay";
+	label = "HS-SPI1";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
+	maximum-speed = "super-speed";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu102-rev1.0.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu102-rev1.0.dts
new file mode 100644
index 000000000..d508f3359
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu102-rev1.0.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 Rev1.0
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include "zynqmp-zcu102-revB.dts"
+
+/ {
+	model = "ZynqMP ZCU102 Rev1.0";
+	compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
+
+&eeprom {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	board_sn: board-sn@0 {
+		reg = <0x0 0x14>;
+	};
+
+	eth_mac: eth-mac@20 {
+		reg = <0x20 0x6>;
+	};
+
+	board_name: board-name@d0 {
+		reg = <0xd0 0x6>;
+	};
+
+	board_revision: board-revision@e0 {
+		reg = <0xe0 0x3>;
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu102-rev1.1.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu102-rev1.1.dts
new file mode 100644
index 000000000..b6798394f
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu102-rev1.1.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 Rev1.1
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include "zynqmp-zcu102-rev1.0.dts"
+
+/ {
+	model = "ZynqMP ZCU102 Rev1.1";
+	compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu102-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu102-revA.dts
new file mode 100644
index 000000000..ec61b7089
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -0,0 +1,1066 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevA
+ *
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU102 RevA";
+	compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = &eeprom;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		sw19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	refhdmi: refhdmi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <114285000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy0: ethernet-phy@21 {
+		reg = <21>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+		/* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* IRQ not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
+		gtr-sel0-hog {
+			gpio-hog;
+			gpios = <0 0>;
+			output-low; /* PCIE = 0, DP = 1 */
+			line-name = "sel0";
+		};
+		gtr-sel1-hog {
+			gpio-hog;
+			gpios = <1 0>;
+			output-high; /* PCIE = 0, DP = 1 */
+			line-name = "sel1";
+		};
+		gtr-sel2-hog {
+			gpio-hog;
+			gpios = <2 0>;
+			output-high; /* PCIE = 0, USB0 = 1 */
+			line-name = "sel2";
+		};
+		gtr-sel3-hog {
+			gpio-hog;
+			gpios = <3 0>;
+			output-high; /* PCIE = 0, SATA = 1 */
+			line-name = "sel3";
+		};
+	};
+
+	tca6416_u61: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller; /* IRQ not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
+	};
+
+	i2c-mux@75 { /* u60 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			u76: ina226@40 { /* u76 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@41 { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u78: ina226@42 { /* u78 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u87: ina226@43 { /* u87 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u85: ina226@44 { /* u85 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u86: ina226@45 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u93: ina226@46 { /* u93 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u88: ina226@47 { /* u88 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u15: ina226@4a { /* u15 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u92: ina226@4b { /* u92 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* PL_PMBUS */
+			u79: ina226@40 { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u81: ina226@41 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u80: ina226@42 { /* u80 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u84: ina226@43 { /* u84 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u16: ina226@44 { /* u16 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@45 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u74: ina226@46 { /* u74 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u75: ina226@47 { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* MAXIM_PMBUS - 00 */
+			max15301@a { /* u46 */
+				compatible = "maxim,max15301";
+				reg = <0xa>;
+			};
+			max15303@b { /* u4 */
+				compatible = "maxim,max15303";
+				reg = <0xb>;
+			};
+			max15303@10 { /* u13 */
+				compatible = "maxim,max15303";
+				reg = <0x10>;
+			};
+			max15301@13 { /* u47 */
+				compatible = "maxim,max15301";
+				reg = <0x13>;
+			};
+			max15303@14 { /* u7 */
+				compatible = "maxim,max15303";
+				reg = <0x14>;
+			};
+			max15303@15 { /* u6 */
+				compatible = "maxim,max15303";
+				reg = <0x15>;
+			};
+			max15303@16 { /* u10 */
+				compatible = "maxim,max15303";
+				reg = <0x16>;
+			};
+			max15303@17 { /* u9 */
+				compatible = "maxim,max15303";
+				reg = <0x17>;
+			};
+			max15301@18 { /* u63 */
+				compatible = "maxim,max15301";
+				reg = <0x18>;
+			};
+			max15303@1a { /* u49 */
+				compatible = "maxim,max15303";
+				reg = <0x1a>;
+			};
+			max15303@1d { /* u18 */
+				compatible = "maxim,max15303";
+				reg = <0x1d>;
+			};
+			max15303@20 { /* u8 */
+				compatible = "maxim,max15303";
+				status = "disabled"; /* unreachable */
+				reg = <0x20>;
+			};
+			max20751@72 { /* u95 */
+				compatible = "maxim,max20751";
+				reg = <0x72>;
+			};
+			max20751@73 { /* u96 */
+				compatible = "maxim,max20751";
+				reg = <0x73>;
+			};
+		};
+		/* Bus 3 is not connected */
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+	/* PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u69 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_4: out@4 {
+					/* refclk4 for PS-GT, used for PCIE slot */
+					reg = <4>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 for PS-GT, used for PCIE */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_7: out@7 {
+					/* refclk7 PL CLK74 */
+					reg = <7>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u42 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>; /* copy from zc702 */
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si5328: clock-generator@69 {/* SI5328 - u20 */
+				compatible = "silabs,si5328";
+				reg = <0x69>;
+				/*
+				 * Chip has interrupt present connected to PL
+				 * interrupt-parent = <&>;
+				 * interrupts = <>;
+				 */
+			};
+		};
+		/* 5 - 7 unconnected */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u135 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* HPC0_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* HPC1_IIC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SEP 3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SEP 2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SEP 1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SEP 0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux-sw {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf-sw {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22", "MIO23";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&psgtr {
+	status = "okay";
+	/* pcie, sata, usb3, dp */
+	clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref0", "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * 1.0 revision has level shifter and this property should be
+	 * removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu102-revB.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu102-revB.dts
new file mode 100644
index 000000000..2422558b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevB
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include "zynqmp-zcu102-revA.dts"
+
+/ {
+	model = "ZynqMP ZCU102 RevB";
+	compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
+
+&gem3 {
+	phy-handle = <&phyc>;
+	phyc: ethernet-phy@c {
+		reg = <0xc>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+		/* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
+	};
+	/* Cleanup from RevA */
+	/delete-node/ ethernet-phy@21;
+};
+
+/* Fix collision with u61 */
+&i2c0 {
+	i2c-mux@75 {
+		i2c@2 {
+			max15303@1b { /* u8 */
+				compatible = "maxim,max15303";
+				reg = <0x1b>;
+			};
+			/delete-node/ max15303@20;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu104-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu104-revA.dts
new file mode 100644
index 000000000..c25ac9af4
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU104 RevA";
+	compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	clock_8t49n287_5: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clock_8t49n287_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_8t49n287_3: clk27 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy0: ethernet-phy@c {
+		reg = <0xc>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
+				compatible = "idt,8t49n287";
+				reg = <0x6c>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
+				compatible = "infineon,irps5401";
+				reg = <0x43>; /* pmbus / i2c 0x13 */
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>; /* pmbus / i2c 0x14 */
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			tca6416_u97: gpio@20 {
+				compatible = "ti,tca6416";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				/*
+				 * IRQ not connected
+				 * Lines:
+				 * 0 - IRPS5401_ALERT_B
+				 * 1 - HDMI_8T49N241_INT_ALM
+				 * 2 - MAX6643_OT_B
+				 * 3 - MAX6643_FANFAIL_B
+				 * 5 - IIC_MUX_RESET_B
+				 * 6 - GEM3_EXP_RESET_B
+				 * 7 - FMC_LPC_PRSNT_M2C_B
+				 * 4, 10 - 17 - not connected
+				 */
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+		/* 3, 6 not connected */
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+	disable-wp;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu104-revC.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu104-revC.dts
new file mode 100644
index 000000000..ce9d8fb3b
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU104 RevC";
+	compatible = "xlnx,zynqmp-zcu104-revC", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = &eeprom;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>;
+	};
+
+	clock_8t49n287_5: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clock_8t49n287_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_8t49n287_3: clk27 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy0: ethernet-phy@c {
+		reg = <0xc>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - IRPS5401_ALERT_B
+		 * 1 - HDMI_8T49N241_INT_ALM
+		 * 2 - MAX6643_OT_B
+		 * 3 - MAX6643_FANFAIL_B
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 7 - FMC_LPC_PRSNT_M2C_B
+		 * 4, 10 - 17 - not connected
+		 */
+	};
+
+	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
+				compatible = "idt,8t49n287";
+				reg = <0x6c>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
+				compatible = "infineon,irps5401";
+				reg = <0x43>; /* pmbus / i2c 0x13 */
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>; /* pmbus / i2c 0x14 */
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			u183: ina226@40 { /* u183 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+		/* 4, 6 not connected */
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+	disable-wp;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu106-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu106-revA.dts
new file mode 100644
index 000000000..ae20e581c
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -0,0 +1,1058 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU106
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU106 RevA";
+	compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = &eeprom;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		sw19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	refhdmi: refhdmi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <114285000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy0: ethernet-phy@c {
+		reg = <0xc>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - SFP_SI5328_INT_ALM
+		 * 1 - HDMI_SI5328_INT_ALM
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 10 - FMC_HPC0_PRSNT_M2C_B
+		 * 11 - FMC_HPC1_PRSNT_M2C_B
+		 * 2-4, 7, 12-17 - not connected
+		 */
+	};
+
+	tca6416_u61: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - VCCPSPLL_EN
+		 * 1 - MGTRAVCC_EN
+		 * 2 - MGTRAVTT_EN
+		 * 3 - VCCPSDDRPLL_EN
+		 * 4 - MIO26_PMU_INPUT_LS
+		 * 5 - PL_PMBUS_ALERT
+		 * 6 - PS_PMBUS_ALERT
+		 * 7 - MAXIM_PMBUS_ALERT
+		 * 10 - PL_DDR4_VTERM_EN
+		 * 11 - PL_DDR4_VPP_2V5_EN
+		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+		 * 13 - PS_DIMM_SUSPEND_EN
+		 * 14 - PS_DDR4_VTERM_EN
+		 * 15 - PS_DDR4_VPP_2V5_EN
+		 * 16 - 17 - not connected
+		 */
+	};
+
+	i2c-mux@75 { /* u60 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			u76: ina226@40 { /* u76 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@41 { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u78: ina226@42 { /* u78 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u87: ina226@43 { /* u87 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u85: ina226@44 { /* u85 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u86: ina226@45 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u93: ina226@46 { /* u93 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u88: ina226@47 { /* u88 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u15: ina226@4a { /* u15 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u92: ina226@4b { /* u92 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* PL_PMBUS */
+			u79: ina226@40 { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u81: ina226@41 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u80: ina226@42 { /* u80 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u84: ina226@43 { /* u84 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u16: ina226@44 { /* u16 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@45 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u74: ina226@46 { /* u74 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u75: ina226@47 { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* MAXIM_PMBUS - 00 */
+			max15301@a { /* u46 */
+				compatible = "maxim,max15301";
+				reg = <0xa>;
+			};
+			max15303@b { /* u4 */
+				compatible = "maxim,max15303";
+				reg = <0xb>;
+			};
+			max15303@10 { /* u13 */
+				compatible = "maxim,max15303";
+				reg = <0x10>;
+			};
+			max15301@13 { /* u47 */
+				compatible = "maxim,max15301";
+				reg = <0x13>;
+			};
+			max15303@14 { /* u7 */
+				compatible = "maxim,max15303";
+				reg = <0x14>;
+			};
+			max15303@15 { /* u6 */
+				compatible = "maxim,max15303";
+				reg = <0x15>;
+			};
+			max15303@16 { /* u10 */
+				compatible = "maxim,max15303";
+				reg = <0x16>;
+			};
+			max15303@17 { /* u9 */
+				compatible = "maxim,max15303";
+				reg = <0x17>;
+			};
+			max15301@18 { /* u63 */
+				compatible = "maxim,max15301";
+				reg = <0x18>;
+			};
+			max15303@1a { /* u49 */
+				compatible = "maxim,max15303";
+				reg = <0x1a>;
+			};
+			max15303@1b { /* u8 */
+				compatible = "maxim,max15303";
+				reg = <0x1b>;
+			};
+			max15303@1d { /* u18 */
+				compatible = "maxim,max15303";
+				reg = <0x1d>;
+			};
+
+			max20751@72 { /* u95 */
+				compatible = "maxim,max20751";
+				reg = <0x72>;
+			};
+			max20751@73 { /* u96 */
+				compatible = "maxim,max20751";
+				reg = <0x73>;
+			};
+		};
+		/* Bus 3 is not connected */
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+	/* PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u69 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_7: out@7 {
+					/* refclk7 PL CLK74 */
+					reg = <7>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u42 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>; /* copy from zc702 */
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si5328: clock-generator@69 {/* SI5328 - u20 */
+				reg = <0x69>;
+				/*
+				 * Chip has interrupt present connected to PL
+				 * interrupt-parent = <&>;
+				 * interrupts = <>;
+				 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#clock-cells = <1>;
+				clocks = <&refhdmi>;
+				clock-names = "xtal";
+				clock-output-names = "si5328";
+
+				si5328_clk: clk0@0 {
+					reg = <0>;
+					clock-frequency = <27000000>;
+				};
+			};
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>; /* FAN controller */
+			temp@4c {/* lm96163 - u128 */
+				compatible = "national,lm96163";
+				reg = <0x4c>;
+			};
+		};
+		/* 6 - 7 unconnected */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u135 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* HPC0_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* HPC1_IIC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SEP 3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SEP 2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SEP 1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SEP 0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO23", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu111-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu111-revA.dts
new file mode 100644
index 000000000..d564f7434
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -0,0 +1,875 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU111
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU111 RevA";
+	compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = &eeprom;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+		/* Another 4GB connected to PL */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		sw19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u67 {
+		compatible = "iio-hwmon";
+		io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
+	};
+	ina226-u59 {
+		compatible = "iio-hwmon";
+		io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
+	};
+	ina226-u61 {
+		compatible = "iio-hwmon";
+		io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+	};
+	ina226-u60 {
+		compatible = "iio-hwmon";
+		io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+	};
+	ina226-u64 {
+		compatible = "iio-hwmon";
+		io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+	};
+	ina226-u69 {
+		compatible = "iio-hwmon";
+		io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
+	};
+	ina226-u66 {
+		compatible = "iio-hwmon";
+		io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u63 {
+		compatible = "iio-hwmon";
+		io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+	};
+	ina226-u3 {
+		compatible = "iio-hwmon";
+		io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
+	};
+	ina226-u71 {
+		compatible = "iio-hwmon";
+		io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u73 {
+		compatible = "iio-hwmon";
+		io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy0: ethernet-phy@c {
+		reg = <0xc>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+
+	tca6416_u22: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - MAX6643_OT_B
+		 * 1 - MAX6643_FANFAIL_B
+		 * 2 - MIO26_PMU_INPUT_LS
+		 * 4 - SFP_SI5382_INT_ALM
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 10 - FMCP_HSPC_PRSNT_M2C_B
+		 * 11 - CLK_SPI_MUX_SEL0
+		 * 12 - CLK_SPI_MUX_SEL1
+		 * 16 - IRPS5401_ALERT_B
+		 * 17 - INA226_PMBUS_ALERT
+		 * 3, 7, 13-15 - not connected
+		 */
+	};
+
+	i2c-mux@75 { /* u23 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			/* PMBUS_ALERT done via pca9544 */
+			u67: ina226@40 { /* u67 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u67";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u59: ina226@41 { /* u59 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u59";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u61: ina226@42 { /* u61 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u61";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u60: ina226@43 { /* u60 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u60";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u64: ina226@45 { /* u64 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u64";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u69: ina226@46 { /* u69 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u69";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+			u66: ina226@47 { /* u66 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u66";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@48 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x48>;
+				shunt-resistor = <5000>;
+			};
+			u63: ina226@49 { /* u63 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u63";
+				reg = <0x49>;
+				shunt-resistor = <5000>;
+			};
+			u3: ina226@4a { /* u3 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u3";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u71: ina226@4b { /* u71 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u71";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@4c { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x4c>;
+				shunt-resistor = <5000>;
+			};
+			u73: ina226@4d { /* u73 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u73";
+				reg = <0x4d>;
+				shunt-resistor = <5000>;
+			};
+			u79: ina226@4e { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x4e>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* NC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
+				compatible = "infineon,irps5401";
+				reg = <0x43>;
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>;
+			};
+			irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
+				compatible = "infineon,irps5401";
+				reg = <0x45>;
+			};
+			/* u68 IR38064 +0 */
+			/* u70 IR38060 +1 */
+			/* u74 IR38060 +2 */
+			/* u75 IR38060 +6 */
+			/* J19 header too */
+
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* SYSMON */
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+	i2c-mux@74 { /* u26 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u88 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u46 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 PL CLK100 */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u47 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si5382: clock-generator@69 { /* SI5382 - u48 */
+				compatible = "silabs,si5382";
+				reg = <0x69>;
+			};
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+				sc18is603@2f { /* sc18is602 - u93 */
+					compatible = "nxp,sc18is603";
+					reg = <0x2f>;
+					/* 4 gpios for CS not handled by driver */
+					/*
+					 * USB2ANY cable or
+					 * LMK04208 - u90 or
+					 * LMX2594 - u102 or
+					 * LMX2594 - u103 or
+					 * LMX2594 - u104
+					 */
+				};
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* FMC connector */
+		};
+		/* 7 NC */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u27 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* FMCP_HSPC_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* NC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SFP3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SFP2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SFP1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SFP0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO23", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	disable-wp;
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu1275-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu1275-revA.dts
new file mode 100644
index 000000000..cdd5c3418
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu1275-revA.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU1275
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZCU1275 RevA";
+	compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275",
+		     "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu1275-revB.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu1275-revB.dts
new file mode 100644
index 000000000..1de890c30
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu1275-revB.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU1275 RevB
+ *
+ * (C) Copyright 2018 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZCU1275 RevB";
+	compatible = "xlnx,zynqmp-zcu1275-revB", "xlnx,zynqmp-zcu1275",
+		     "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		mmc0 = &sdhci1;
+		ethernet0 = &gem1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <1>; /* KSZ9031RNXIC on AES-FMC-NETW1-G */
+			rxc-skew-ps = <1800>; /* Skew control of RX_CLK pad output */
+			txc-skew-ps = <1800>; /* Skew control of GTX_CLK pad input */
+			txen-skew-ps = <900>; /* Skew control of TX_CTL pad input */
+			rxdv-skew-ps = <0>; /* Skew control of RX_CTL pad output */
+			rxd0-skew-ps = <0>; /* Skew control of RXD0 pad output */
+			rxd1-skew-ps = <0>; /* Skew control of RXD1 pad output */
+			rxd2-skew-ps = <0>; /* Skew control of RXD2 pad output */
+			rxd3-skew-ps = <0>; /* Skew control of RXD3 pad output */
+			txd0-skew-ps = <900>; /* Skew control of TXD0 pad input */
+			txd1-skew-ps = <900>; /* Skew control of TXD1 pad input */
+			txd2-skew-ps = <900>; /* Skew control of TXD2 pad input */
+			txd3-skew-ps = <900>; /* Skew control of TXD3 pad input */
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@0 { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+	/*
+	 * 1.0 revision has level shifter and this property should be
+	 * removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	xlnx,mio-bank = <1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu1285-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu1285-revA.dts
new file mode 100644
index 000000000..21d62e993
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu1285-revA.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU1285 RevA
+ *
+ * (C) Copyright 2018 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZCU1285 RevA";
+	compatible = "xlnx,zynqmp-zcu1285-revA", "xlnx,zynqmp-zcu1285",
+		     "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		mmc0 = &sdhci1;
+		ethernet0 = &gem1; /* EMIO */
+		i2c = &i2c0; /* EMIO */
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ina226-u60 {
+		compatible = "iio-hwmon";
+		io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+	};
+	ina226-u61 {
+		compatible = "iio-hwmon";
+		io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+	};
+	ina226-u63 {
+		compatible = "iio-hwmon";
+		io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u64 {
+		compatible = "iio-hwmon";
+		io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u22 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PMBUS */
+			max20751@74 { /* u23 */
+				compatible = "maxim,max20751";
+				reg = <0x74>;
+			};
+			max20751@70 { /* u89 */
+				compatible = "maxim,max20751";
+				reg = <0x70>;
+			};
+			max15301@a { /* u28 */
+				compatible = "maxim,max15301";
+				reg = <0xa>;
+			};
+			max15303@b { /* u48 */
+				compatible = "maxim,max15303";
+				reg = <0xb>;
+			};
+			max15303@d { /* u27 */
+				compatible = "maxim,max15303";
+				reg = <0xd>;
+			};
+			max15303@e { /* u11 */
+				compatible = "maxim,max15303";
+				reg = <0xe>;
+			};
+			max15303@f { /* u96 */
+				compatible = "maxim,max15303";
+				reg = <0xf>;
+			};
+			max15303@11 { /* u47 */
+				compatible = "maxim,max15303";
+				reg = <0x11>;
+			};
+			max15303@12 { /* u24 */
+				compatible = "maxim,max15303";
+				reg = <0x12>;
+			};
+			max15301@13 { /* u29 */
+				compatible = "maxim,max15301";
+				reg = <0x13>;
+			};
+			max15303@14 { /* u51 */
+				compatible = "maxim,max15303";
+				reg = <0x14>;
+			};
+			max15303@15 { /* u30 */
+				compatible = "maxim,max15303";
+				reg = <0x15>;
+			};
+			max15303@16 { /* u102 */
+				compatible = "maxim,max15303";
+				reg = <0x16>;
+			};
+			max15301@17 { /* u50 */
+				compatible = "maxim,max15301";
+				reg = <0x17>;
+			};
+			max15301@18 { /* u31 */
+				compatible = "maxim,max15301";
+				reg = <0x18>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* CM_I2C */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYS_EEPROM */
+			eeprom: eeprom@54 { /* u101 */
+				compatible = "atmel,24c32"; /* 24LC32A */
+				reg = <0x54>;
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* FMC1 */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* FMC2 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* ANALOG_PMBUS */
+			u60: ina226@40 { /* u60 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u60";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			u61: ina226@41 { /* u61 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u61";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			u63: ina226@42 { /* u63 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u63";
+				reg = <0x42>;
+				shunt-resistor = <1000>;
+			};
+			u65: ina226@43 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x43>;
+				shunt-resistor = <1000>;
+			};
+			u64: ina226@44 { /* u64 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u64";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* ANALOG_CM_I2C */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* FMC3 */
+		};
+	};
+};
+
+&gem1 {
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <1>; /* KSZ9031RNXIC on AES-FMC-NETW1-G */
+			rxc-skew-ps = <1800>; /* Skew control of RX_CLK pad output */
+			txc-skew-ps = <1800>; /* Skew control of GTX_CLK pad input */
+			txen-skew-ps = <900>; /* Skew control of TX_CTL pad input */
+			rxdv-skew-ps = <0>; /* Skew control of RX_CTL pad output */
+			rxd0-skew-ps = <0>; /* Skew control of RXD0 pad output */
+			rxd1-skew-ps = <0>; /* Skew control of RXD1 pad output */
+			rxd2-skew-ps = <0>; /* Skew control of RXD2 pad output */
+			rxd3-skew-ps = <0>; /* Skew control of RXD3 pad output */
+			txd0-skew-ps = <900>; /* Skew control of TXD0 pad input */
+			txd1-skew-ps = <900>; /* Skew control of TXD1 pad input */
+			txd2-skew-ps = <900>; /* Skew control of TXD2 pad input */
+			txd3-skew-ps = <900>; /* Skew control of TXD3 pad input */
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	xlnx,mio-bank = <1>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu208-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu208-revA.dts
new file mode 100644
index 000000000..880281d4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu208-revA.dts
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU208
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU208 RevA";
+	compatible = "xlnx,zynqmp-zcu208-revA", "xlnx,zynqmp-zcu208", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = &eeprom;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		sw19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat_led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-vccint {
+		compatible = "iio-hwmon";
+		io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
+	};
+	ina226-vccint-io-bram-ps {
+		compatible = "iio-hwmon";
+		io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
+	};
+	ina226-vcc1v8 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
+	};
+	ina226-vcc1v2 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
+	};
+	ina226-vadj-fmc {
+		compatible = "iio-hwmon";
+		io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
+	};
+	ina226-mgtavcc {
+		compatible = "iio-hwmon";
+		io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
+	};
+	ina226-mgt1v2 {
+		compatible = "iio-hwmon";
+		io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
+	};
+	ina226-mgt1v8 {
+		compatible = "iio-hwmon";
+		io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
+	};
+	ina226-vccint-ams {
+		compatible = "iio-hwmon";
+		io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
+	};
+	ina226-dac-avtt {
+		compatible = "iio-hwmon";
+		io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
+	};
+	ina226-dac-avccaux {
+		compatible = "iio-hwmon";
+		io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
+	};
+	ina226-adc-avcc {
+		compatible = "iio-hwmon";
+		io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
+	};
+	ina226-adc-avccaux {
+		compatible = "iio-hwmon";
+		io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
+	};
+	ina226-dac-avcc {
+		compatible = "iio-hwmon";
+		io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: ethernet-phy@c {
+		reg = <0xc>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
+		  "QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
+		  "QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
+		  "I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
+		  "", "", "BUTTON", "LED", "", /* 20 - 24 */
+		  "", "PMU_INPUT", "", "", "", /* 25 - 29 */
+		  "", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
+		  "PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
+		  "SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "", "", /* 40 - 44 */
+		  "SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
+		  "SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
+		  "USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
+		  "USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
+		  "ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
+		  "ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
+		  "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "", "", /* 78 - 79 */
+		  "", "", "", "", "", /* 80 - 84 */
+		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 90 - 94 */
+		  "", "", "", "", "", /* 95 - 99 */
+		  "", "", "", "", "", /* 100 - 104 */
+		  "", "", "", "", "", /* 105 - 109 */
+		  "", "", "", "", "", /* 110 - 114 */
+		  "", "", "", "", "", /* 115 - 119 */
+		  "", "", "", "", "", /* 120 - 124 */
+		  "", "", "", "", "", /* 125 - 129 */
+		  "", "", "", "", "", /* 130 - 134 */
+		  "", "", "", "", "", /* 135 - 139 */
+		  "", "", "", "", "", /* 140 - 144 */
+		  "", "", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+
+	tca6416_u15: gpio@20 { /* u15 */
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */
+				  "", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
+				  "FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
+				  "", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
+	};
+
+	i2c-mux@75 { /* u17 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			/* PMBUS_ALERT done via pca9544 */
+			vccint: ina226@40 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccint";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			vccint_io_bram_ps: ina226@41 { /* u57 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccint-io-bram-ps";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			vcc1v8: ina226@42 { /* u60 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v8";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+			vcc1v2: ina226@43 { /* u58 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v2";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			vadj_fmc: ina226@45 { /* u62 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vadj-fmc";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			mgtavcc: ina226@46 { /* u67 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgtavcc";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+			mgt1v2: ina226@47 { /* u63 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgt1v2";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			mgt1v8: ina226@48 { /* u64 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgt1v8";
+				reg = <0x48>;
+				shunt-resistor = <5000>;
+			};
+			vccint_ams: ina226@49 { /* u61 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccint-ams";
+				reg = <0x49>;
+				shunt-resistor = <5000>;
+			};
+			dac_avtt: ina226@4a { /* u59 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-dac-avtt";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			dac_avccaux: ina226@4b { /* u124 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-dac-avccaux";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+			adc_avcc: ina226@4c { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-adc-avcc";
+				reg = <0x4c>;
+				shunt-resistor = <5000>;
+			};
+			adc_avccaux: ina226@4d { /* u71 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-adc-avccaux";
+				reg = <0x4d>;
+				shunt-resistor = <5000>;
+			};
+			dac_avcc: ina226@4e { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-dac-avcc";
+				reg = <0x4e>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* NC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* u104 - ir35215 0x10/0x40 */
+			/* u127 - ir38164 0x1b/0x4b */
+			/* u112 - ir38164 0x13/0x43 */
+			/* u123 - ir38164 0x1c/0x4c */
+
+			irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>; /* i2c addr 0x14 */
+			};
+			irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
+				compatible = "infineon,irps5401";
+				reg = <0x45>; /* i2c addr 0x15 */
+			};
+			/* J21 header too */
+
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* SYSMON */
+		};
+	};
+	/* u38 MPS430 */
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9548"; /* u20 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c-mux-idle-disconnect;
+		/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+		i2c_eeprom: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u21 */
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+		i2c_si5341: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u43 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 PL CLK100 */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+		};
+		i2c_si570_user_c0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user_c0";
+			};
+		};
+		i2c_si570_mgt: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c_8a34001: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			idt_8a34001: phc@5b {
+				compatible = "idt,8a34001"; /* u409B */
+				reg = <0x5b>;
+			};
+		};
+		i2c_clk104: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* CLK104_SDA */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* RFMCP connector */
+		};
+		/* 7 NC */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u22 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* FMCP_HSPC_IIC */
+		};
+		i2c_si570_user_c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si570_3: clock-generator@5d { /* USER C1 SI570 - u130 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user_c1";
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SFP3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SFP2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SFP1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SFP0 */
+		};
+	};
+	/* MSP430 */
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* pcie, sata, usb3, dp */
+	clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref0", "ref1", "ref2", "ref3";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	disable-wp;
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp-zcu216-revA.dts b/roms/u-boot/arch/arm/dts/zynqmp-zcu216-revA.dts
new file mode 100644
index 000000000..f899226ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp-zcu216-revA.dts
@@ -0,0 +1,708 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU216
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU216 RevA";
+	compatible = "xlnx,zynqmp-zcu216-revA", "xlnx,zynqmp-zcu216", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		xlnx,eeprom = <&eeprom>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		sw19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat_led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-vccint {
+		compatible = "iio-hwmon";
+		io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
+	};
+	ina226-vccint-io-bram-ps {
+		compatible = "iio-hwmon";
+		io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
+	};
+	ina226-vcc1v8 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
+	};
+	ina226-vcc1v2 {
+		compatible = "iio-hwmon";
+		io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
+	};
+	ina226-vadj-fmc {
+		compatible = "iio-hwmon";
+		io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
+	};
+	ina226-mgtavcc {
+		compatible = "iio-hwmon";
+		io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
+	};
+	ina226-mgt1v2 {
+		compatible = "iio-hwmon";
+		io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
+	};
+	ina226-mgt1v8 {
+		compatible = "iio-hwmon";
+		io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
+	};
+	ina226-vccint-ams {
+		compatible = "iio-hwmon";
+		io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
+	};
+	ina226-dac-avtt {
+		compatible = "iio-hwmon";
+		io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
+	};
+	ina226-dac-avccaux {
+		compatible = "iio-hwmon";
+		io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
+	};
+	ina226-adc-avcc {
+		compatible = "iio-hwmon";
+		io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
+	};
+	ina226-adc-avccaux {
+		compatible = "iio-hwmon";
+		io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
+	};
+	ina226-dac-avcc {
+		compatible = "iio-hwmon";
+		io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* pcie, sata, usb3, dp */
+	clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref0", "ref1", "ref2", "ref3";
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: ethernet-phy@c {
+		reg = <0xc>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
+		  "QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
+		  "QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
+		  "I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
+		  "", "", "BUTTON", "LED", "", /* 20 - 24 */
+		  "", "PMU_INPUT", "", "", "", /* 25 - 29 */
+		  "", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
+		  "PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
+		  "SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "", "", /* 40 - 44 */
+		  "SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
+		  "SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
+		  "USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
+		  "USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
+		  "ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
+		  "ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
+		  "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "", "", /* 78 - 79 */
+		  "", "", "", "", "", /* 80 - 84 */
+		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 90 - 94 */
+		  "", "", "", "", "", /* 95 - 99 */
+		  "", "", "", "", "", /* 100 - 104 */
+		  "", "", "", "", "", /* 105 - 109 */
+		  "", "", "", "", "", /* 110 - 114 */
+		  "", "", "", "", "", /* 115 - 119 */
+		  "", "", "", "", "", /* 120 - 124 */
+		  "", "", "", "", "", /* 125 - 129 */
+		  "", "", "", "", "", /* 130 - 134 */
+		  "", "", "", "", "", /* 135 - 139 */
+		  "", "", "", "", "", /* 140 - 144 */
+		  "", "", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 174 */
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+
+	tca6416_u15: gpio@20 { /* u15 */
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "", /* 0 - 3 */
+				  "", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
+				  "FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
+				  "", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
+	};
+
+	i2c-mux@75 { /* u17 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			/* PMBUS_ALERT done via pca9544 */
+			vccint: ina226@40 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccint";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			vccint_io_bram_ps: ina226@41 { /* u57 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccint-io-bram-ps";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			vcc1v8: ina226@42 { /* u60 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v8";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+			vcc1v2: ina226@43 { /* u58 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vcc1v2";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			vadj_fmc: ina226@45 { /* u62 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vadj-fmc";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			mgtavcc: ina226@46 { /* u67 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgtavcc";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+			mgt1v2: ina226@47 { /* u63 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgt1v2";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			mgt1v8: ina226@48 { /* u64 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-mgt1v8";
+				reg = <0x48>;
+				shunt-resistor = <5000>;
+			};
+			vccint_ams: ina226@49 { /* u61 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-vccint-ams";
+				reg = <0x49>;
+				shunt-resistor = <5000>;
+			};
+			dac_avtt: ina226@4a { /* u59 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-dac-avtt";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			dac_avccaux: ina226@4b { /* u124 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-dac-avccaux";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+			adc_avcc: ina226@4c { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-adc-avcc";
+				reg = <0x4c>;
+				shunt-resistor = <5000>;
+			};
+			adc_avccaux: ina226@4d { /* u71 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-adc-avccaux";
+				reg = <0x4d>;
+				shunt-resistor = <5000>;
+			};
+			dac_avcc: ina226@4e { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-dac-avcc";
+				reg = <0x4e>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* NC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* u104 - ir35215 0x10/0x40 */
+			/* u127 - ir38164 0x1b/0x4b */
+			/* u112 - ir38164 0x13/0x43 */
+			/* u123 - ir38164 0x1c/0x4c */
+
+			irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>; /* i2c addr 0x14 */
+			};
+			irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
+				compatible = "infineon,irps5401";
+				reg = <0x45>; /* i2c addr 0x15 */
+			};
+			/* J21 header too */
+
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* SYSMON */
+		};
+	};
+	/* u38 MPS430 */
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9548"; /* u20 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c-mux-idle-disconnect;
+		/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+		i2c_eeprom: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u21 */
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+		i2c_si5341: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u43 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 PL CLK100 */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+		};
+		i2c_si570_user_c0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user_c0";
+			};
+		};
+		i2c_si570_mgt: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c_8a34001: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			idt_8a34001: phc@5b {
+				compatible = "idt,8a34001"; /* u409B */
+				reg = <0x5b>;
+			};
+		};
+		i2c_clk104: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* CLK104_SDA */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* RFMCP connector */
+		};
+		/* 7 NC */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u22 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* FMCP_HSPC_IIC */
+		};
+		i2c_si570_user_c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si570_3: clock-generator@5d { /* USER C1 SI570 - u130 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user_c1";
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SFP3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SFP2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SFP1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SFP0 */
+		};
+	};
+	/* MSP430 */
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	disable-wp;
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
diff --git a/roms/u-boot/arch/arm/dts/zynqmp.dtsi b/roms/u-boot/arch/arm/dts/zynqmp.dtsi
new file mode 100644
index 000000000..84d977022
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/zynqmp.dtsi
@@ -0,0 +1,972 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP
+ *
+ * (C) Copyright 2014 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
+#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+/ {
+	compatible = "xlnx,zynqmp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table>;
+			reg = <0x0>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <600>;
+				min-residency-us = <10000>;
+			};
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp00 {
+			opp-hz = /bits/ 64 <1199999988>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <599999994>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <399999996>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <299999997>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	zynqmp_ipi {
+		u-boot,dm-pre-reloc;
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		interrupt-parent = <&gic>;
+		interrupts = <0 35 4>;
+		xlnx,ipi-id = <0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipi_mailbox_pmu1: mailbox@ff990400 {
+			u-boot,dm-pre-reloc;
+			reg = <0x0 0xff9905c0 0x0 0x20>,
+			      <0x0 0xff9905e0 0x0 0x20>,
+			      <0x0 0xff990e80 0x0 0x20>,
+			      <0x0 0xff990ea0 0x0 0x20>;
+			reg-names = "local_request_region",
+				    "local_response_region",
+				    "remote_request_region",
+				    "remote_response_region";
+			#mbox-cells = <1>;
+			xlnx,ipi-id = <4>;
+		};
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
+		interrupts = <0 143 4>,
+			     <0 144 4>,
+			     <0 145 4>,
+			     <0 146 4>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	firmware {
+		zynqmp_firmware: zynqmp-firmware {
+			compatible = "xlnx,zynqmp-firmware";
+			#power-domain-cells = <1>;
+			method = "smc";
+			u-boot,dm-pre-reloc;
+
+			zynqmp_power: zynqmp-power {
+				u-boot,dm-pre-reloc;
+				compatible = "xlnx,zynqmp-power";
+				interrupt-parent = <&gic>;
+				interrupts = <0 35 4>;
+				mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
+				mbox-names = "tx", "rx";
+			};
+
+			nvmem_firmware {
+				compatible = "xlnx,zynqmp-nvmem-fw";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				soc_revision: soc_revision@0 {
+					reg = <0x0 0x4>;
+				};
+			};
+
+			zynqmp_pcap: pcap {
+				compatible = "xlnx,zynqmp-pcap-fpga";
+				clock-names = "ref_clk";
+			};
+
+			xlnx_aes: zynqmp-aes {
+				compatible = "xlnx,zynqmp-aes";
+			};
+
+			zynqmp_reset: reset-controller {
+				compatible = "xlnx,zynqmp-reset";
+				#reset-cells = <1>;
+			};
+
+			pinctrl0: pinctrl {
+				compatible = "xlnx,zynqmp-pinctrl";
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	edac {
+		compatible = "arm,cortex-a53-edac";
+	};
+
+	fpga_full: fpga-full {
+		compatible = "fpga-region";
+		fpga-mgr = <&zynqmp_pcap>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	amba: axi {
+		compatible = "simple-bus";
+		u-boot,dm-pre-reloc;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		can0: can@ff060000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clock-names = "can_clk", "pclk";
+			reg = <0x0 0xff060000 0x0 0x1000>;
+			interrupts = <0 23 4>;
+			interrupt-parent = <&gic>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_0>;
+		};
+
+		can1: can@ff070000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clock-names = "can_clk", "pclk";
+			reg = <0x0 0xff070000 0x0 0x1000>;
+			interrupts = <0 24 4>;
+			interrupt-parent = <&gic>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_1>;
+		};
+
+		cci: cci@fd6e0000 {
+			compatible = "arm,cci-400";
+			reg = <0x0 0xfd6e0000 0x0 0x9000>;
+			ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>;
+			};
+		};
+
+		/* GDMA */
+		fpd_dma_chan1: dma@fd500000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd500000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 124 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14e8>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan2: dma@fd510000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd510000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 125 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14e9>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan3: dma@fd520000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd520000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 126 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ea>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan4: dma@fd530000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd530000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 127 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14eb>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan5: dma@fd540000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd540000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 128 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ec>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan6: dma@fd550000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd550000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 129 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ed>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan7: dma@fd560000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd560000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 130 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ee>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan8: dma@fd570000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd570000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 131 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ef>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		gic: interrupt-controller@f9010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			reg = <0x0 0xf9010000 0x0 0x10000>,
+			      <0x0 0xf9020000 0x0 0x20000>,
+			      <0x0 0xf9040000 0x0 0x20000>,
+			      <0x0 0xf9060000 0x0 0x20000>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		gpu: gpu@fd4b0000 {
+			status = "disabled";
+			compatible = "arm,mali-400", "arm,mali-utgard";
+			reg = <0x0 0xfd4b0000 0x0 0x10000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>;
+			interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1";
+			clock-names = "gpu", "gpu_pp0", "gpu_pp1";
+			power-domains = <&zynqmp_firmware PD_GPU>;
+		};
+
+		/* LPDDMA default allows only secured access. inorder to enable
+		 * These dma channels, Users should ensure that these dma
+		 * Channels are allowed for non secure access.
+		 */
+		lpd_dma_chan1: dma@ffa80000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa80000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 77 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x868>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan2: dma@ffa90000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa90000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 78 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x869>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan3: dma@ffaa0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaa0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 79 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86a>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan4: dma@ffab0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffab0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 80 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86b>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan5: dma@ffac0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffac0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 81 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86c>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan6: dma@ffad0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffad0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 82 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86d>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan7: dma@ffae0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffae0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 83 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86e>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan8: dma@ffaf0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaf0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 84 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86f>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		mc: memory-controller@fd070000 {
+			compatible = "xlnx,zynqmp-ddrc-2.40a";
+			reg = <0x0 0xfd070000 0x0 0x30000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 112 4>;
+		};
+
+		nand0: nand-controller@ff100000 {
+			compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
+			status = "disabled";
+			reg = <0x0 0xff100000 0x0 0x1000>;
+			clock-names = "controller", "bus";
+			interrupt-parent = <&gic>;
+			interrupts = <0 14 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x872>;
+			power-domains = <&zynqmp_firmware PD_NAND>;
+		};
+
+		gem0: ethernet@ff0b0000 {
+			compatible = "cdns,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 57 4>, <0 57 4>;
+			reg = <0x0 0xff0b0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x874>;
+			power-domains = <&zynqmp_firmware PD_ETH_0>;
+		};
+
+		gem1: ethernet@ff0c0000 {
+			compatible = "cdns,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 59 4>, <0 59 4>;
+			reg = <0x0 0xff0c0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x875>;
+			power-domains = <&zynqmp_firmware PD_ETH_1>;
+		};
+
+		gem2: ethernet@ff0d0000 {
+			compatible = "cdns,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 61 4>, <0 61 4>;
+			reg = <0x0 0xff0d0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x876>;
+			power-domains = <&zynqmp_firmware PD_ETH_2>;
+		};
+
+		gem3: ethernet@ff0e0000 {
+			compatible = "cdns,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 63 4>, <0 63 4>;
+			reg = <0x0 0xff0e0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x877>;
+			power-domains = <&zynqmp_firmware PD_ETH_3>;
+		};
+
+		gpio: gpio@ff0a0000 {
+			compatible = "xlnx,zynqmp-gpio-1.0";
+			status = "disabled";
+			#gpio-cells = <0x2>;
+			gpio-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0xff0a0000 0x0 0x1000>;
+			power-domains = <&zynqmp_firmware PD_GPIO>;
+		};
+
+		i2c0: i2c@ff020000 {
+			compatible = "cdns,i2c-r1p14";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 17 4>;
+			reg = <0x0 0xff020000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_0>;
+		};
+
+		i2c1: i2c@ff030000 {
+			compatible = "cdns,i2c-r1p14";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 18 4>;
+			reg = <0x0 0xff030000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_1>;
+		};
+
+		ocm: memory-controller@ff960000 {
+			compatible = "xlnx,zynqmp-ocmc-1.0";
+			reg = <0x0 0xff960000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 10 4>;
+		};
+
+		pcie: pcie@fd0e0000 {
+			compatible = "xlnx,nwl-pcie-2.11";
+			status = "disabled";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			msi-controller;
+			device_type = "pci";
+			interrupt-parent = <&gic>;
+			interrupts = <0 118 4>,
+				     <0 117 4>,
+				     <0 116 4>,
+				     <0 115 4>,	/* MSI_1 [63...32] */
+				     <0 114 4>;	/* MSI_0 [31...0] */
+			interrupt-names = "misc", "dummy", "intx",
+					  "msi1", "msi0";
+			msi-parent = <&pcie>;
+			reg = <0x0 0xfd0e0000 0x0 0x1000>,
+			      <0x0 0xfd480000 0x0 0x1000>,
+			      <0x80 0x00000000 0x0 0x1000000>;
+			reg-names = "breg", "pcireg", "cfg";
+			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000>,/* non-prefetchable memory */
+				 <0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			power-domains = <&zynqmp_firmware PD_PCIE>;
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		qspi: spi@ff0f0000 {
+			u-boot,dm-pre-reloc;
+			compatible = "xlnx,zynqmp-qspi-1.0";
+			status = "disabled";
+			clock-names = "ref_clk", "pclk";
+			interrupts = <0 15 4>;
+			interrupt-parent = <&gic>;
+			num-cs = <1>;
+			reg = <0x0 0xff0f0000 0x0 0x1000>,
+			      <0x0 0xc0000000 0x0 0x8000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x873>;
+			power-domains = <&zynqmp_firmware PD_QSPI>;
+		};
+
+		psgtr: phy@fd400000 {
+			compatible = "xlnx,zynqmp-psgtr-v1.1";
+			status = "disabled";
+			reg = <0x0 0xfd400000 0x0 0x40000>,
+			      <0x0 0xfd3d0000 0x0 0x1000>;
+			reg-names = "serdes", "siou";
+			#phy-cells = <4>;
+		};
+
+		rtc: rtc@ffa60000 {
+			compatible = "xlnx,zynqmp-rtc";
+			status = "disabled";
+			reg = <0x0 0xffa60000 0x0 0x100>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 26 4>, <0 27 4>;
+			interrupt-names = "alarm", "sec";
+			calibration = <0x8000>;
+		};
+
+		sata: ahci@fd0c0000 {
+			compatible = "ceva,ahci-1v84";
+			status = "disabled";
+			reg = <0x0 0xfd0c0000 0x0 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 133 4>;
+			power-domains = <&zynqmp_firmware PD_SATA>;
+			#stream-id-cells = <4>;
+			iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
+				 <&smmu 0x4c2>, <&smmu 0x4c3>;
+			/* dma-coherent; */
+		};
+
+		sdhci0: mmc@ff160000 {
+			u-boot,dm-pre-reloc;
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 48 4>;
+			reg = <0x0 0xff160000 0x0 0x1000>;
+			clock-names = "clk_xin", "clk_ahb";
+			xlnx,device_id = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x870>;
+			nvmem-cells = <&soc_revision>;
+			nvmem-cell-names = "soc_revision";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
+			power-domains = <&zynqmp_firmware PD_SD_0>;
+		};
+
+		sdhci1: mmc@ff170000 {
+			u-boot,dm-pre-reloc;
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 49 4>;
+			reg = <0x0 0xff170000 0x0 0x1000>;
+			clock-names = "clk_xin", "clk_ahb";
+			xlnx,device_id = <1>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x871>;
+			nvmem-cells = <&soc_revision>;
+			nvmem-cell-names = "soc_revision";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
+			power-domains = <&zynqmp_firmware PD_SD_1>;
+		};
+
+		smmu: iommu@fd800000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0xfd800000 0x0 0x20000>;
+			#iommu-cells = <1>;
+			status = "disabled";
+			#global-interrupts = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
+		};
+
+		spi0: spi@ff040000 {
+			compatible = "cdns,spi-r1p6";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 19 4>;
+			reg = <0x0 0xff040000 0x0 0x1000>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_0>;
+		};
+
+		spi1: spi@ff050000 {
+			compatible = "cdns,spi-r1p6";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 20 4>;
+			reg = <0x0 0xff050000 0x0 0x1000>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_1>;
+		};
+
+		ttc0: timer@ff110000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
+			reg = <0x0 0xff110000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_0>;
+		};
+
+		ttc1: timer@ff120000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
+			reg = <0x0 0xff120000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_1>;
+		};
+
+		ttc2: timer@ff130000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
+			reg = <0x0 0xff130000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_2>;
+		};
+
+		ttc3: timer@ff140000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
+			reg = <0x0 0xff140000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_3>;
+		};
+
+		uart0: serial@ff000000 {
+			u-boot,dm-pre-reloc;
+			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 21 4>;
+			reg = <0x0 0xff000000 0x0 0x1000>;
+			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_0>;
+		};
+
+		uart1: serial@ff010000 {
+			u-boot,dm-pre-reloc;
+			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 22 4>;
+			reg = <0x0 0xff010000 0x0 0x1000>;
+			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_1>;
+		};
+
+		usb0: usb0@ff9d0000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9d0000 0x0 0x100>;
+			clock-names = "bus_clk", "ref_clk";
+			power-domains = <&zynqmp_firmware PD_USB_0>;
+			ranges;
+			nvmem-cells = <&soc_revision>;
+			nvmem-cell-names = "soc_revision";
+
+			dwc3_0: dwc3@fe200000 {
+				compatible = "snps,dwc3";
+				status = "disabled";
+				reg = <0x0 0xfe200000 0x0 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 65 4>, <0 69 4>;
+				#stream-id-cells = <1>;
+				iommus = <&smmu 0x860>;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,refclk_fladj;
+				/* dma-coherent; */
+			};
+		};
+
+		usb1: usb1@ff9e0000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9e0000 0x0 0x100>;
+			clock-names = "bus_clk", "ref_clk";
+			power-domains = <&zynqmp_firmware PD_USB_1>;
+			ranges;
+			nvmem-cells = <&soc_revision>;
+			nvmem-cell-names = "soc_revision";
+
+			dwc3_1: dwc3@fe300000 {
+				compatible = "snps,dwc3";
+				status = "disabled";
+				reg = <0x0 0xfe300000 0x0 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 70 4>, <0 74 4>;
+				#stream-id-cells = <1>;
+				iommus = <&smmu 0x861>;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,refclk_fladj;
+				/* dma-coherent; */
+			};
+		};
+
+		watchdog0: watchdog@fd4d0000 {
+			compatible = "cdns,wdt-r1p2";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 113 1>;
+			reg = <0x0 0xfd4d0000 0x0 0x1000>;
+			timeout-sec = <60>;
+			reset-on-timeout;
+		};
+
+		lpd_watchdog: watchdog@ff150000 {
+			compatible = "cdns,wdt-r1p2";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 52 1>;
+			reg = <0x0 0xff150000 0x0 0x1000>;
+			timeout-sec = <10>;
+		};
+
+		xilinx_ams: ams@ffa50000 {
+			compatible = "xlnx,zynqmp-ams";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 56 4>;
+			interrupt-names = "ams-irq";
+			reg = <0x0 0xffa50000 0x0 0x800>;
+			reg-names = "ams-base";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#io-channel-cells = <1>;
+			ranges;
+
+			ams_ps: ams_ps@ffa50800 {
+				compatible = "xlnx,zynqmp-ams-ps";
+				status = "disabled";
+				reg = <0x0 0xffa50800 0x0 0x400>;
+			};
+
+			ams_pl: ams_pl@ffa50c00 {
+				compatible = "xlnx,zynqmp-ams-pl";
+				status = "disabled";
+				reg = <0x0 0xffa50c00 0x0 0x400>;
+			};
+		};
+
+		zynqmp_dpdma: dma-controller@fd4c0000 {
+			compatible = "xlnx,zynqmp-dpdma";
+			status = "disabled";
+			reg = <0x0 0xfd4c0000 0x0 0x1000>;
+			interrupts = <0 122 4>;
+			interrupt-parent = <&gic>;
+			clock-names = "axi_clk";
+			power-domains = <&zynqmp_firmware PD_DP>;
+			#dma-cells = <1>;
+		};
+
+		zynqmp_dpsub: display@fd4a0000 {
+			compatible = "xlnx,zynqmp-dpsub-1.7";
+			status = "disabled";
+			reg = <0x0 0xfd4a0000 0x0 0x1000>,
+			      <0x0 0xfd4aa000 0x0 0x1000>,
+			      <0x0 0xfd4ab000 0x0 0x1000>,
+			      <0x0 0xfd4ac000 0x0 0x1000>;
+			reg-names = "dp", "blend", "av_buf", "aud";
+			interrupts = <0 119 4>;
+			interrupt-parent = <&gic>;
+			clock-names = "dp_apb_clk", "dp_aud_clk",
+				      "dp_vtc_pixel_clk_in";
+			power-domains = <&zynqmp_firmware PD_DP>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
+			dma-names = "vid0", "vid1", "vid2", "gfx0";
+			dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+		};
+	};
+};
diff --git a/roms/u-boot/arch/arm/include/asm/acpi_table.h b/roms/u-boot/arch/arm/include/asm/acpi_table.h
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/acpi_table.h
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/chilisom.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/chilisom.h
new file mode 100644
index 000000000..493be6431
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/chilisom.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Grinn
+ */
+
+#ifndef __ARCH_ARM_MACH_CHILISOM_SOM_H__
+#define __ARCH_ARM_MACH_CHILISOM_SOM_H__
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+void chilisom_enable_pin_mux(void);
+void chilisom_spl_board_init(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/clk_synthesizer.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/clk_synthesizer.h
new file mode 100644
index 000000000..7bcafba6f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/clk_synthesizer.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * clk-synthesizer.h
+ *
+ * Clock synthesizer header
+ *
+ * Copyright (C) 2016, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef __CLK_SYNTHESIZER_H
+#define __CLK_SYNTHESIZER_H
+
+#define CLK_SYNTHESIZER_ID_REG		0x0
+#define CLK_SYNTHESIZER_XCSEL		0x05
+#define CLK_SYNTHESIZER_MUX_REG		0x14
+#define CLK_SYNTHESIZER_PDIV2_REG	0x16
+#define CLK_SYNTHESIZER_PDIV3_REG	0x17
+
+#define CLK_SYNTHESIZER_BYTE_MODE	0x80
+
+/**
+ * struct clk_synth: This structure holds data neeed for configuring
+ *		     for clock synthesizer.
+ * @id: The id of synthesizer
+ * @capacitor: value of the capacitor attached
+ * @mux: mux settings.
+ * @pdiv2: Div to be applied to second output
+ * @pdiv3: Div to be applied to third output
+ */
+struct clk_synth {
+	u32 id;
+	u32 capacitor;
+	u32 mux;
+	u32 pdiv2;
+	u32 pdiv3;
+};
+
+int setup_clock_synthesizer(struct clk_synth *data);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/clock.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/clock.h
new file mode 100644
index 000000000..5d775902b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/clock.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * clock.h
+ *
+ * clock header
+ *
+ * Copyright (C) 2011, Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#ifndef _CLOCKS_H_
+#define _CLOCKS_H_
+
+#include <asm/arch/clocks_am33xx.h>
+#include <asm/arch/hardware.h>
+
+#if defined(CONFIG_TI816X) || defined(CONFIG_TI814X)
+#include <asm/arch/clock_ti81xx.h>
+#endif
+
+#define LDELAY 1000000
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT		0
+#define CD_CLKCTRL_CLKTRCTRL_MASK		3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP		0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP		1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP		2
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT		0
+#define MODULE_CLKCTRL_MODULEMODE_MASK		3
+#define MODULE_CLKCTRL_IDLEST_SHIFT		16
+#define MODULE_CLKCTRL_IDLEST_MASK		(3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE		0
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN	2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL	0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING	1
+#define MODULE_CLKCTRL_IDLEST_IDLE		2
+#define MODULE_CLKCTRL_IDLEST_DISABLED		3
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_SSC_EN_SHIFT		12
+#define CM_CLKMODE_DPLL_SSC_EN_MASK		(1 << 12)
+#define CM_CLKMODE_DPLL_SSC_ACK_MASK		(1 << 13)
+#define CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK	(1 << 14)
+#define CM_CLKMODE_DPLL_SSC_TYPE_MASK		(1 << 15)
+#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT		11
+#define CM_CLKMODE_DPLL_REGM4XEN_MASK		(1 << 11)
+#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT		10
+#define CM_CLKMODE_DPLL_LPMODE_EN_MASK		(1 << 10)
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT	9
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK	(1 << 9)
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT	8
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK	(1 << 8)
+#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT		5
+#define CM_CLKMODE_DPLL_RAMP_RATE_MASK		(0x7 << 5)
+#define CM_CLKMODE_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_EN_MASK			(0x7 << 0)
+
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK		7
+
+#define DPLL_EN_STOP			1
+#define DPLL_EN_MN_BYPASS		4
+#define DPLL_EN_LOW_POWER_BYPASS	5
+#define DPLL_EN_FAST_RELOCK_BYPASS	6
+#define DPLL_EN_LOCK			7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK		1
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_M_SHIFT			8
+#define CM_CLKSEL_DPLL_M_MASK			(0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT			0
+#define CM_CLKSEL_DPLL_N_MASK			0x7F
+
+struct dpll_params {
+	u32 m;
+	u32 n;
+	s8 m2;
+	s8 m3;
+	s8 m4;
+	s8 m5;
+	s8 m6;
+};
+
+struct dpll_regs {
+	u32 cm_clkmode_dpll;
+	u32 cm_idlest_dpll;
+	u32 cm_autoidle_dpll;
+	u32 cm_clksel_dpll;
+	u32 cm_div_m2_dpll;
+	u32 cm_div_m3_dpll;
+	u32 cm_div_m4_dpll;
+	u32 cm_div_m5_dpll;
+	u32 cm_div_m6_dpll;
+};
+
+extern const struct dpll_regs dpll_mpu_regs;
+extern const struct dpll_regs dpll_core_regs;
+extern const struct dpll_regs dpll_per_regs;
+extern const struct dpll_regs dpll_ddr_regs;
+extern const struct dpll_regs dpll_disp_regs;
+extern const struct dpll_params dpll_mpu_opp[NUM_CRYSTAL_FREQ][NUM_OPPS];
+extern const struct dpll_params dpll_core_1000MHz[NUM_CRYSTAL_FREQ];
+extern const struct dpll_params dpll_per_192MHz[NUM_CRYSTAL_FREQ];
+extern const struct dpll_params dpll_ddr2_266MHz[NUM_CRYSTAL_FREQ];
+extern const struct dpll_params dpll_ddr3_303MHz[NUM_CRYSTAL_FREQ];
+extern const struct dpll_params dpll_ddr3_400MHz[NUM_CRYSTAL_FREQ];
+
+extern struct cm_wkuppll *const cmwkup;
+
+const struct dpll_params *get_dpll_mpu_params(void);
+const struct dpll_params *get_dpll_core_params(void);
+const struct dpll_params *get_dpll_per_params(void);
+const struct dpll_params *get_dpll_ddr_params(void);
+void scale_vcores(void);
+void do_setup_dpll(const struct dpll_regs *, const struct dpll_params *);
+void prcm_init(void);
+void enable_basic_clocks(void);
+
+void rtc_only_update_board_type(u32 btype);
+u32 rtc_only_get_board_type(void);
+void rtc_only_prcm_init(void);
+void rtc_only_enable_basic_clocks(void);
+
+void do_enable_clocks(u32 *const *, u32 *const *, u8);
+void do_disable_clocks(u32 *const *, u32 *const *, u8);
+
+void set_mpu_spreadspectrum(int permille);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
new file mode 100644
index 000000000..f0699229a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
@@ -0,0 +1,142 @@
+/*
+ * ti81xx.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _CLOCK_TI81XX_H_
+#define _CLOCK_TI81XX_H_
+
+#define PRCM_MOD_EN     0x2
+
+#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500)
+#define CM_ALWON_BASE   (PRCM_BASE + 0x1400)
+
+struct cm_def {
+	unsigned int resv0[2];
+	unsigned int l3fastclkstctrl;
+	unsigned int resv1[1];
+	unsigned int pciclkstctrl;
+	unsigned int resv2[1];
+	unsigned int ducaticlkstctrl;
+	unsigned int resv3[1];
+	unsigned int emif0clkctrl;
+	unsigned int emif1clkctrl;
+	unsigned int dmmclkctrl;
+	unsigned int fwclkctrl;
+	unsigned int resv4[10];
+	unsigned int usbclkctrl;
+	unsigned int resv5[1];
+	unsigned int sataclkctrl;
+	unsigned int resv6[4];
+	unsigned int ducaticlkctrl;
+	unsigned int pciclkctrl;
+};
+
+struct cm_alwon {
+	unsigned int l3slowclkstctrl;
+	unsigned int ethclkstctrl;
+	unsigned int l3medclkstctrl;
+	unsigned int mmu_clkstctrl;
+	unsigned int mmucfg_clkstctrl;
+	unsigned int ocmc0clkstctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int vcpclkstctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int ocmc1clkstctrl;
+#endif
+	unsigned int mpuclkstctrl;
+	unsigned int sysclk4clkstctrl;
+	unsigned int sysclk5clkstctrl;
+	unsigned int sysclk6clkstctrl;
+	unsigned int rtcclkstctrl;
+	unsigned int l3fastclkstctrl;
+	unsigned int resv0[67];
+	unsigned int mcasp0clkctrl;
+	unsigned int mcasp1clkctrl;
+	unsigned int mcasp2clkctrl;
+	unsigned int mcbspclkctrl;
+	unsigned int uart0clkctrl;
+	unsigned int uart1clkctrl;
+	unsigned int uart2clkctrl;
+	unsigned int gpio0clkctrl;
+	unsigned int gpio1clkctrl;
+	unsigned int i2c0clkctrl;
+	unsigned int i2c1clkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int mcasp345clkctrl;
+	unsigned int atlclkctrl;
+	unsigned int mlbclkctrl;
+	unsigned int pataclkctrl;
+	unsigned int resv1[1];
+	unsigned int uart3clkctrl;
+	unsigned int uart4clkctrl;
+	unsigned int uart5clkctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int resv1[1];
+	unsigned int timer1clkctrl;
+	unsigned int timer2clkctrl;
+	unsigned int timer3clkctrl;
+	unsigned int timer4clkctrl;
+	unsigned int timer5clkctrl;
+	unsigned int timer6clkctrl;
+	unsigned int timer7clkctrl;
+#endif
+	unsigned int wdtimerclkctrl;
+	unsigned int spiclkctrl;
+	unsigned int mailboxclkctrl;
+	unsigned int spinboxclkctrl;
+	unsigned int mmudataclkctrl;
+	unsigned int resv2[2];
+	unsigned int mmucfgclkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int resv3[2];
+#elif defined(CONFIG_TI816X)
+	unsigned int resv3[1];
+	unsigned int sdioclkctrl;
+#endif
+	unsigned int ocmc0clkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int vcpclkctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int ocmc1clkctrl;
+#endif
+	unsigned int resv4[2];
+	unsigned int controlclkctrl;
+	unsigned int resv5[2];
+	unsigned int gpmcclkctrl;
+	unsigned int ethernet0clkctrl;
+	unsigned int ethernet1clkctrl;
+	unsigned int mpuclkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int debugssclkctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int resv6[1];
+#endif
+	unsigned int l3clkctrl;
+	unsigned int l4hsclkctrl;
+	unsigned int l4lsclkctrl;
+	unsigned int rtcclkctrl;
+	unsigned int tpccclkctrl;
+	unsigned int tptc0clkctrl;
+	unsigned int tptc1clkctrl;
+	unsigned int tptc2clkctrl;
+	unsigned int tptc3clkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int resv6[4];
+	unsigned int dcan01clkctrl;
+	unsigned int mmchs0clkctrl;
+	unsigned int mmchs1clkctrl;
+	unsigned int mmchs2clkctrl;
+	unsigned int custefuseclkctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int sr0clkctrl;
+	unsigned int sr1clkctrl;
+#endif
+};
+
+#endif /* _CLOCK_TI81XX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
new file mode 100644
index 000000000..e5ad50754
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * clocks_am33xx.h
+ *
+ * AM33xx clock define
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#ifndef _CLOCKS_AM33XX_H_
+#define _CLOCKS_AM33XX_H_
+
+/* MAIN PLL Fdll supported frequencies */
+#define MPUPLL_M_1000	1000
+#define MPUPLL_M_800	800
+#define MPUPLL_M_720	720
+#define MPUPLL_M_600	600
+#define MPUPLL_M_500	500
+#define MPUPLL_M_300	300
+
+#define UART_RESET		(0x1 << 1)
+#define UART_CLK_RUNNING_MASK	0x1
+#define UART_SMART_IDLE_EN	(0x1 << 0x3)
+
+#define CM_DLL_CTRL_NO_OVERRIDE	0x0
+#define CM_DLL_READYST		0x4
+
+#define NUM_OPPS	6
+
+extern void enable_dmm_clocks(void);
+extern void enable_emif_clocks(void);
+extern const struct dpll_params dpll_core_opp100;
+extern struct dpll_params dpll_mpu_opp100;
+
+#endif	/* endif _CLOCKS_AM33XX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/cpu.h
new file mode 100644
index 000000000..79081de70
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -0,0 +1,612 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * cpu.h
+ *
+ * AM33xx specific header file
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef _AM33XX_CPU_H
+#define _AM33XX_CPU_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#include <linux/bitops.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#include <asm/arch/hardware.h>
+
+#define CL_BIT(x)			(0 << x)
+
+/* Timer register bits */
+#define TCLR_ST				BIT(0)	/* Start=1 Stop=0 */
+#define TCLR_AR				BIT(1)	/* Auto reload */
+#define TCLR_PRE			BIT(5)	/* Pre-scaler enable */
+#define TCLR_PTV_SHIFT			(2)	/* Pre-scaler shift value */
+#define TCLR_PRE_DISABLE		CL_BIT(5) /* Pre-scalar disable */
+#define TCLR_CE				BIT(6)	/* compare mode enable */
+#define TCLR_SCPWM			BIT(7)	/* pwm outpin behaviour */
+#define TCLR_TCM			BIT(8)	/* edge detection of input pin*/
+#define TCLR_TRG_SHIFT			(10)	/* trigmode on pwm outpin */
+#define TCLR_PT				BIT(12)	/* pulse/toggle mode of outpin*/
+#define TCLR_CAPTMODE			BIT(13) /* capture mode */
+#define TCLR_GPOCFG			BIT(14)	/* 0=output,1=input */
+
+#define TCFG_RESET			BIT(0)	/* software reset */
+#define TCFG_EMUFREE			BIT(1)	/* behaviour of tmr on debug */
+#define TCFG_IDLEMOD_SHIFT		(2)	/* power management */
+
+/* cpu-id for AM43XX AM33XX and TI81XX family */
+#define AM437X				0xB98C
+#define AM335X				0xB944
+#define TI81XX				0xB81E
+#define DEVICE_ID			(CTRL_BASE + 0x0600)
+#define DEVICE_ID_MASK			0x1FFF
+#define PACKAGE_TYPE_SHIFT		16
+#define PACKAGE_TYPE_MASK		(3 << 16)
+
+/* Package Type */
+#define PACKAGE_TYPE_UNDEFINED		0x0
+#define PACKAGE_TYPE_ZCZ		0x1
+#define PACKAGE_TYPE_ZCE		0x2
+#define PACKAGE_TYPE_RESERVED		0x3
+
+/* MPU max frequencies */
+#define AM335X_ZCZ_300			0x1FEF
+#define AM335X_ZCZ_600			0x1FAF
+#define AM335X_ZCZ_720			0x1F2F
+#define AM335X_ZCZ_800			0x1E2F
+#define AM335X_ZCZ_1000			0x1C2F
+#define AM335X_ZCE_300			0x1FDF
+#define AM335X_ZCE_600			0x1F9F
+
+/* This gives the status of the boot mode pins on the evm */
+#define SYSBOOT_MASK			(BIT(0) | BIT(1) | BIT(2)\
+					| BIT(3) | BIT(4))
+
+#define PRM_RSTCTRL_RESET		0x01
+#define PRM_RSTST_WARM_RESET_MASK	0x232
+
+/* EMIF Control register bits */
+#define EMIF_CTRL_DEVOFF	BIT(0)
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+#include <asm/ti-common/omap_wdt.h>
+
+#ifndef CONFIG_AM43XX
+/* Encapsulating core pll registers */
+struct cm_wkuppll {
+	unsigned int wkclkstctrl;	/* offset 0x00 */
+	unsigned int wkctrlclkctrl;	/* offset 0x04 */
+	unsigned int wkgpio0clkctrl;	/* offset 0x08 */
+	unsigned int wkl4wkclkctrl;	/* offset 0x0c */
+	unsigned int timer0clkctrl;	/* offset 0x10 */
+	unsigned int resv2[3];
+	unsigned int idlestdpllmpu;	/* offset 0x20 */
+	unsigned int sscdeltamstepdllmpu; /* off  0x24 */
+	unsigned int sscmodfreqdivdpllmpu; /* off 0x28 */
+	unsigned int clkseldpllmpu;	/* offset 0x2c */
+	unsigned int resv4[1];
+	unsigned int idlestdpllddr;	/* offset 0x34 */
+	unsigned int resv5[2];
+	unsigned int clkseldpllddr;	/* offset 0x40 */
+	unsigned int resv6[4];
+	unsigned int clkseldplldisp;	/* offset 0x54 */
+	unsigned int resv7[1];
+	unsigned int idlestdpllcore;	/* offset 0x5c */
+	unsigned int resv8[2];
+	unsigned int clkseldpllcore;	/* offset 0x68 */
+	unsigned int resv9[1];
+	unsigned int idlestdpllper;	/* offset 0x70 */
+	unsigned int resv10[2];
+	unsigned int clkdcoldodpllper;	/* offset 0x7c */
+	unsigned int divm4dpllcore;	/* offset 0x80 */
+	unsigned int divm5dpllcore;	/* offset 0x84 */
+	unsigned int clkmoddpllmpu;	/* offset 0x88 */
+	unsigned int clkmoddpllper;	/* offset 0x8c */
+	unsigned int clkmoddpllcore;	/* offset 0x90 */
+	unsigned int clkmoddpllddr;	/* offset 0x94 */
+	unsigned int clkmoddplldisp;	/* offset 0x98 */
+	unsigned int clkseldpllper;	/* offset 0x9c */
+	unsigned int divm2dpllddr;	/* offset 0xA0 */
+	unsigned int divm2dplldisp;	/* offset 0xA4 */
+	unsigned int divm2dpllmpu;	/* offset 0xA8 */
+	unsigned int divm2dpllper;	/* offset 0xAC */
+	unsigned int resv11[1];
+	unsigned int wkup_uart0ctrl;	/* offset 0xB4 */
+	unsigned int wkup_i2c0ctrl;	/* offset 0xB8 */
+	unsigned int wkup_adctscctrl;	/* offset 0xBC */
+	unsigned int resv12;
+	unsigned int timer1clkctrl;	/* offset 0xC4 */
+	unsigned int resv13[4];
+	unsigned int divm6dpllcore;	/* offset 0xD8 */
+};
+
+/**
+ * Encapsulating peripheral functional clocks
+ * pll registers
+ */
+struct cm_perpll {
+	unsigned int l4lsclkstctrl;	/* offset 0x00 */
+	unsigned int l3sclkstctrl;	/* offset 0x04 */
+	unsigned int l4fwclkstctrl;	/* offset 0x08 */
+	unsigned int l3clkstctrl;	/* offset 0x0c */
+	unsigned int resv1;
+	unsigned int cpgmac0clkctrl;	/* offset 0x14 */
+	unsigned int lcdclkctrl;	/* offset 0x18 */
+	unsigned int usb0clkctrl;	/* offset 0x1C */
+	unsigned int resv2;
+	unsigned int tptc0clkctrl;	/* offset 0x24 */
+	unsigned int emifclkctrl;	/* offset 0x28 */
+	unsigned int ocmcramclkctrl;	/* offset 0x2c */
+	unsigned int gpmcclkctrl;	/* offset 0x30 */
+	unsigned int mcasp0clkctrl;	/* offset 0x34 */
+	unsigned int uart5clkctrl;	/* offset 0x38 */
+	unsigned int mmc0clkctrl;	/* offset 0x3C */
+	unsigned int elmclkctrl;	/* offset 0x40 */
+	unsigned int i2c2clkctrl;	/* offset 0x44 */
+	unsigned int i2c1clkctrl;	/* offset 0x48 */
+	unsigned int spi0clkctrl;	/* offset 0x4C */
+	unsigned int spi1clkctrl;	/* offset 0x50 */
+	unsigned int resv3[3];
+	unsigned int l4lsclkctrl;	/* offset 0x60 */
+	unsigned int l4fwclkctrl;	/* offset 0x64 */
+	unsigned int mcasp1clkctrl;	/* offset 0x68 */
+	unsigned int uart1clkctrl;	/* offset 0x6C */
+	unsigned int uart2clkctrl;	/* offset 0x70 */
+	unsigned int uart3clkctrl;	/* offset 0x74 */
+	unsigned int uart4clkctrl;	/* offset 0x78 */
+	unsigned int timer7clkctrl;	/* offset 0x7C */
+	unsigned int timer2clkctrl;	/* offset 0x80 */
+	unsigned int timer3clkctrl;	/* offset 0x84 */
+	unsigned int timer4clkctrl;	/* offset 0x88 */
+	unsigned int resv4[8];
+	unsigned int gpio1clkctrl;	/* offset 0xAC */
+	unsigned int gpio2clkctrl;	/* offset 0xB0 */
+	unsigned int gpio3clkctrl;	/* offset 0xB4 */
+	unsigned int resv5;
+	unsigned int tpccclkctrl;	/* offset 0xBC */
+	unsigned int dcan0clkctrl;	/* offset 0xC0 */
+	unsigned int dcan1clkctrl;	/* offset 0xC4 */
+	unsigned int resv6;
+	unsigned int epwmss1clkctrl;	/* offset 0xCC */
+	unsigned int emiffwclkctrl;	/* offset 0xD0 */
+	unsigned int epwmss0clkctrl;	/* offset 0xD4 */
+	unsigned int epwmss2clkctrl;	/* offset 0xD8 */
+	unsigned int l3instrclkctrl;	/* offset 0xDC */
+	unsigned int l3clkctrl;		/* Offset 0xE0 */
+	unsigned int resv8[2];
+	unsigned int timer5clkctrl;	/* offset 0xEC */
+	unsigned int timer6clkctrl;	/* offset 0xF0 */
+	unsigned int mmc1clkctrl;	/* offset 0xF4 */
+	unsigned int mmc2clkctrl;	/* offset 0xF8 */
+	unsigned int resv9[8];
+	unsigned int l4hsclkstctrl;	/* offset 0x11C */
+	unsigned int l4hsclkctrl;	/* offset 0x120 */
+	unsigned int resv10[8];
+	unsigned int cpswclkstctrl;	/* offset 0x144 */
+	unsigned int lcdcclkstctrl;	/* offset 0x148 */
+};
+
+/* Encapsulating Display pll registers */
+struct cm_dpll {
+	unsigned int resv1;
+	unsigned int clktimer7clk;	/* offset 0x04 */
+	unsigned int clktimer2clk;	/* offset 0x08 */
+	unsigned int clktimer3clk;	/* offset 0x0C */
+	unsigned int clktimer4clk;	/* offset 0x10 */
+	unsigned int resv2;
+	unsigned int clktimer5clk;	/* offset 0x18 */
+	unsigned int clktimer6clk;	/* offset 0x1C */
+	unsigned int resv3[2];
+	unsigned int clktimer1clk;	/* offset 0x28 */
+	unsigned int resv4[2];
+	unsigned int clklcdcpixelclk;	/* offset 0x34 */
+};
+
+struct prm_device_inst {
+	unsigned int prm_rstctrl;
+	unsigned int prm_rsttime;
+	unsigned int prm_rstst;
+};
+#else
+/* Encapsulating core pll registers */
+struct cm_wkuppll {
+	unsigned int resv0[136];
+	unsigned int wkl4wkclkctrl;	/* offset 0x220 */
+	unsigned int resv1[7];
+	unsigned int usbphy0clkctrl;	/* offset 0x240 */
+	unsigned int resv112;
+	unsigned int usbphy1clkctrl;	/* offset 0x248 */
+	unsigned int resv113[45];
+	unsigned int wkclkstctrl;	/* offset 0x300 */
+	unsigned int resv2[15];
+	unsigned int wkup_i2c0ctrl;	/* offset 0x340 */
+	unsigned int resv3;
+	unsigned int wkup_uart0ctrl;	/* offset 0x348 */
+	unsigned int resv4[5];
+	unsigned int wkctrlclkctrl;	/* offset 0x360 */
+	unsigned int resv5;
+	unsigned int wkgpio0clkctrl;	/* offset 0x368 */
+
+	unsigned int resv6[109];
+	unsigned int clkmoddpllcore;	/* offset 0x520 */
+	unsigned int idlestdpllcore;	/* offset 0x524 */
+	unsigned int resv61;
+	unsigned int clkseldpllcore;	/* offset 0x52C */
+	unsigned int resv7[2];
+	unsigned int divm4dpllcore;	/* offset 0x538 */
+	unsigned int divm5dpllcore;	/* offset 0x53C */
+	unsigned int divm6dpllcore;	/* offset 0x540 */
+
+	unsigned int resv8[7];
+	unsigned int clkmoddpllmpu;	/* offset 0x560 */
+	unsigned int idlestdpllmpu;	/* offset 0x564 */
+	unsigned int resv9;
+	unsigned int clkseldpllmpu;	/* offset 0x56c */
+	unsigned int divm2dpllmpu;	/* offset 0x570 */
+
+	unsigned int resv10[11];
+	unsigned int clkmoddpllddr;	/* offset 0x5A0 */
+	unsigned int idlestdpllddr;	/* offset 0x5A4 */
+	unsigned int resv11;
+	unsigned int clkseldpllddr;	/* offset 0x5AC */
+	unsigned int divm2dpllddr;	/* offset 0x5B0 */
+
+	unsigned int resv12[11];
+	unsigned int clkmoddpllper;	/* offset 0x5E0 */
+	unsigned int idlestdpllper;	/* offset 0x5E4 */
+	unsigned int resv13;
+	unsigned int clkseldpllper;	/* offset 0x5EC */
+	unsigned int divm2dpllper;	/* offset 0x5F0 */
+	unsigned int resv14[8];
+	unsigned int clkdcoldodpllper;	/* offset 0x614 */
+
+	unsigned int resv15[2];
+	unsigned int clkmoddplldisp;	/* offset 0x620 */
+	unsigned int resv16[2];
+	unsigned int clkseldplldisp;	/* offset 0x62C */
+	unsigned int divm2dplldisp;	/* offset 0x630 */
+};
+
+/*
+ * Encapsulating peripheral functional clocks
+ * pll registers
+ */
+struct cm_perpll {
+	unsigned int l3clkstctrl;	/* offset 0x00 */
+	unsigned int resv0[7];
+	unsigned int l3clkctrl;		/* Offset 0x20 */
+	unsigned int resv112[7];
+	unsigned int l3instrclkctrl;	/* offset 0x40 */
+	unsigned int resv2[3];
+	unsigned int ocmcramclkctrl;	/* offset 0x50 */
+	unsigned int resv3[9];
+	unsigned int tpccclkctrl;	/* offset 0x78 */
+	unsigned int resv4;
+	unsigned int tptc0clkctrl;	/* offset 0x80 */
+
+	unsigned int resv5[7];
+	unsigned int l4hsclkctrl;	/* offset 0x0A0 */
+	unsigned int resv6;
+	unsigned int l4fwclkctrl;	/* offset 0x0A8 */
+	unsigned int resv7[85];
+	unsigned int l3sclkstctrl;	/* offset 0x200 */
+	unsigned int resv8[7];
+	unsigned int gpmcclkctrl;	/* offset 0x220 */
+	unsigned int resv9[5];
+	unsigned int mcasp0clkctrl;	/* offset 0x238 */
+	unsigned int resv10;
+	unsigned int mcasp1clkctrl;	/* offset 0x240 */
+	unsigned int resv11;
+	unsigned int mmc2clkctrl;	/* offset 0x248 */
+	unsigned int resv12[3];
+	unsigned int qspiclkctrl;       /* offset 0x258 */
+	unsigned int resv121;
+	unsigned int usb0clkctrl;	/* offset 0x260 */
+	unsigned int resv122;
+	unsigned int usb1clkctrl;	/* offset 0x268 */
+	unsigned int resv13[101];
+	unsigned int l4lsclkstctrl;	/* offset 0x400 */
+	unsigned int resv14[7];
+	unsigned int l4lsclkctrl;	/* offset 0x420 */
+	unsigned int resv15;
+	unsigned int dcan0clkctrl;	/* offset 0x428 */
+	unsigned int resv16;
+	unsigned int dcan1clkctrl;	/* offset 0x430 */
+	unsigned int resv17[13];
+	unsigned int elmclkctrl;	/* offset 0x468 */
+
+	unsigned int resv18[3];
+	unsigned int gpio1clkctrl;	/* offset 0x478 */
+	unsigned int resv19;
+	unsigned int gpio2clkctrl;	/* offset 0x480 */
+	unsigned int resv20;
+	unsigned int gpio3clkctrl;	/* offset 0x488 */
+	unsigned int resv41;
+	unsigned int gpio4clkctrl;	/* offset 0x490 */
+	unsigned int resv42;
+	unsigned int gpio5clkctrl;	/* offset 0x498 */
+	unsigned int resv21[3];
+
+	unsigned int i2c1clkctrl;	/* offset 0x4A8 */
+	unsigned int resv22;
+	unsigned int i2c2clkctrl;	/* offset 0x4B0 */
+	unsigned int resv23[3];
+	unsigned int mmc0clkctrl;	/* offset 0x4C0 */
+	unsigned int resv24;
+	unsigned int mmc1clkctrl;	/* offset 0x4C8 */
+
+	unsigned int resv25[13];
+	unsigned int spi0clkctrl;	/* offset 0x500 */
+	unsigned int resv26;
+	unsigned int spi1clkctrl;	/* offset 0x508 */
+	unsigned int resv27[9];
+	unsigned int timer2clkctrl;	/* offset 0x530 */
+	unsigned int resv28;
+	unsigned int timer3clkctrl;	/* offset 0x538 */
+	unsigned int resv29;
+	unsigned int timer4clkctrl;	/* offset 0x540 */
+	unsigned int resv30[5];
+	unsigned int timer7clkctrl;	/* offset 0x558 */
+
+	unsigned int resv31[9];
+	unsigned int uart1clkctrl;	/* offset 0x580 */
+	unsigned int resv32;
+	unsigned int uart2clkctrl;	/* offset 0x588 */
+	unsigned int resv33;
+	unsigned int uart3clkctrl;	/* offset 0x590 */
+	unsigned int resv34;
+	unsigned int uart4clkctrl;	/* offset 0x598 */
+	unsigned int resv35;
+	unsigned int uart5clkctrl;	/* offset 0x5A0 */
+	unsigned int resv36[5];
+	unsigned int usbphyocp2scp0clkctrl;	/* offset 0x5B8 */
+	unsigned int resv361;
+	unsigned int usbphyocp2scp1clkctrl;	/* offset 0x5C0 */
+	unsigned int resv3611[79];
+
+	unsigned int emifclkstctrl;	/* offset 0x700 */
+	unsigned int resv362[7];
+	unsigned int emifclkctrl;	/* offset 0x720 */
+	unsigned int resv37[3];
+	unsigned int emiffwclkctrl;	/* offset 0x730 */
+	unsigned int resv371;
+	unsigned int otfaemifclkctrl;	/* offset 0x738 */
+	unsigned int resv38[57];
+	unsigned int lcdclkctrl;	/* offset 0x820 */
+	unsigned int resv39[183];
+	unsigned int cpswclkstctrl;	/* offset 0xB00 */
+	unsigned int resv40[7];
+	unsigned int cpgmac0clkctrl;	/* offset 0xB20 */
+};
+
+struct cm_device_inst {
+	unsigned int cm_clkout1_ctrl;
+	unsigned int cm_dll_ctrl;
+};
+
+struct prm_device_inst {
+	unsigned int rstctrl;
+	unsigned int rstst;
+	unsigned int rsttime;
+	unsigned int sram_count;
+	unsigned int ldo_sram_core_set;	/* offset 0x10 */
+	unsigned int ldo_sram_core_ctr;
+	unsigned int ldo_sram_mpu_setu;
+	unsigned int ldo_sram_mpu_ctrl;
+	unsigned int io_count;		/* offset 0x20 */
+	unsigned int io_pmctrl;
+	unsigned int vc_val_bypass;
+	unsigned int resv1;
+	unsigned int emif_ctrl;		/* offset 0x30 */
+};
+
+struct cm_dpll {
+	unsigned int resv1;
+	unsigned int clktimer2clk;	/* offset 0x04 */
+	unsigned int resv2[11];
+	unsigned int clkselmacclk;	/* offset 0x34 */ 
+};
+#endif /* CONFIG_AM43XX */
+
+/* Control Module RTC registers */
+struct cm_rtc {
+	unsigned int rtcclkctrl;	/* offset 0x0 */
+	unsigned int clkstctrl;		/* offset 0x4 */
+};
+
+/* Timer 32 bit registers */
+struct gptimer {
+	unsigned int tidr;		/* offset 0x00 */
+	unsigned char res1[12];
+	unsigned int tiocp_cfg;		/* offset 0x10 */
+	unsigned char res2[12];
+	unsigned int tier;		/* offset 0x20 */
+	unsigned int tistatr;		/* offset 0x24 */
+	unsigned int tistat;		/* offset 0x28 */
+	unsigned int tisr;		/* offset 0x2c */
+	unsigned int tcicr;		/* offset 0x30 */
+	unsigned int twer;		/* offset 0x34 */
+	unsigned int tclr;		/* offset 0x38 */
+	unsigned int tcrr;		/* offset 0x3c */
+	unsigned int tldr;		/* offset 0x40 */
+	unsigned int ttgr;		/* offset 0x44 */
+	unsigned int twpc;		/* offset 0x48 */
+	unsigned int tmar;		/* offset 0x4c */
+	unsigned int tcar1;		/* offset 0x50 */
+	unsigned int tscir;		/* offset 0x54 */
+	unsigned int tcar2;		/* offset 0x58 */
+};
+
+/* UART Registers */
+struct uart_sys {
+	unsigned int resv1[21];
+	unsigned int uartsyscfg;	/* offset 0x54 */
+	unsigned int uartsyssts;	/* offset 0x58 */
+};
+
+/* VTP Registers */
+struct vtp_reg {
+	unsigned int vtp0ctrlreg;
+};
+
+/* Control Status Register */
+struct ctrl_stat {
+	unsigned int resv1[16];
+	unsigned int statusreg;		/* ofset 0x40 */
+	unsigned int resv2[51];
+	unsigned int secure_emif_sdram_config;	/* offset 0x0110 */
+	unsigned int resv3[319];
+	unsigned int dev_attr;
+};
+
+/* AM33XX GPIO registers */
+#define OMAP_GPIO_REVISION		0x0000
+#define OMAP_GPIO_SYSCONFIG		0x0010
+#define OMAP_GPIO_SYSSTATUS		0x0114
+#define OMAP_GPIO_IRQSTATUS1		0x002c
+#define OMAP_GPIO_IRQSTATUS2		0x0030
+#define OMAP_GPIO_IRQSTATUS_SET_0	0x0034
+#define OMAP_GPIO_IRQSTATUS_SET_1	0x0038
+#define OMAP_GPIO_CTRL			0x0130
+#define OMAP_GPIO_OE			0x0134
+#define OMAP_GPIO_DATAIN		0x0138
+#define OMAP_GPIO_DATAOUT		0x013c
+#define OMAP_GPIO_LEVELDETECT0		0x0140
+#define OMAP_GPIO_LEVELDETECT1		0x0144
+#define OMAP_GPIO_RISINGDETECT		0x0148
+#define OMAP_GPIO_FALLINGDETECT		0x014c
+#define OMAP_GPIO_DEBOUNCE_EN		0x0150
+#define OMAP_GPIO_DEBOUNCE_VAL		0x0154
+#define OMAP_GPIO_CLEARDATAOUT		0x0190
+#define OMAP_GPIO_SETDATAOUT		0x0194
+
+/* Control Device Register */
+
+ /* Control Device Register */
+#define MREQPRIO_0_SAB_INIT1_MASK	0xFFFFFF8F
+#define MREQPRIO_0_SAB_INIT0_MASK	0xFFFFFFF8
+#define MREQPRIO_1_DSS_MASK		0xFFFFFF8F
+
+struct ctrl_dev {
+	unsigned int deviceid;		/* offset 0x00 */
+	unsigned int resv1[7];
+	unsigned int usb_ctrl0;		/* offset 0x20 */
+	unsigned int resv2;
+	unsigned int usb_ctrl1;		/* offset 0x28 */
+	unsigned int resv3;
+	unsigned int macid0l;		/* offset 0x30 */
+	unsigned int macid0h;		/* offset 0x34 */
+	unsigned int macid1l;		/* offset 0x38 */
+	unsigned int macid1h;		/* offset 0x3c */
+	unsigned int resv4[4];
+	unsigned int miisel;		/* offset 0x50 */
+	unsigned int resv5[7];
+	unsigned int mreqprio_0;	/* offset 0x70 */
+	unsigned int mreqprio_1;	/* offset 0x74 */
+	unsigned int resv6[97];
+	unsigned int efuse_sma;		/* offset 0x1FC */
+};
+
+/* Bandwidth Limiter Portion of the L3Fast Configuration Register */
+#define BW_LIMITER_BW_FRAC_MASK         0xFFFFFFE0
+#define BW_LIMITER_BW_INT_MASK          0xFFFFFFF0
+#define BW_LIMITER_BW_WATERMARK_MASK    0xFFFFF800
+
+struct l3f_cfg_bwlimiter {
+	u32 padding0[2];
+	u32 modena_init0_bw_fractional;
+	u32 modena_init0_bw_integer;
+	u32 modena_init0_watermark_0;
+};
+
+/* gmii_sel register defines */
+#define GMII1_SEL_MII		0x0
+#define GMII1_SEL_RMII		0x1
+#define GMII1_SEL_RGMII		0x2
+#define GMII2_SEL_MII		0x0
+#define GMII2_SEL_RMII		0x4
+#define GMII2_SEL_RGMII		0x8
+#define RGMII1_IDMODE		BIT(4)
+#define RGMII2_IDMODE		BIT(5)
+#define RMII1_IO_CLK_EN		BIT(6)
+#define RMII2_IO_CLK_EN		BIT(7)
+
+#define MII_MODE_ENABLE		(GMII1_SEL_MII | GMII2_SEL_MII)
+#define RMII_MODE_ENABLE        (GMII1_SEL_RMII | GMII2_SEL_RMII)
+#define RGMII_MODE_ENABLE	(GMII1_SEL_RGMII | GMII2_SEL_RGMII)
+#define RGMII_INT_DELAY		(RGMII1_IDMODE | RGMII2_IDMODE)
+#define RMII_CHIPCKL_ENABLE     (RMII1_IO_CLK_EN | RMII2_IO_CLK_EN)
+
+/* PWMSS */
+struct pwmss_regs {
+	unsigned int idver;
+	unsigned int sysconfig;
+	unsigned int clkconfig;
+	unsigned int clkstatus;
+};
+#define ECAP_CLK_EN		BIT(0)
+#define ECAP_CLK_STOP_REQ	BIT(1)
+#define EPWM_CLK_EN		BIT(8)
+#define EPWM_CLK_STOP_REQ	BIT(9)
+
+struct pwmss_ecap_regs {
+	unsigned int tsctr;
+	unsigned int ctrphs;
+	unsigned int cap1;
+	unsigned int cap2;
+	unsigned int cap3;
+	unsigned int cap4;
+	unsigned int resv1[4];
+	unsigned short ecctl1;
+	unsigned short ecctl2;
+};
+
+struct pwmss_epwm_regs {
+	unsigned short tbctl;
+	unsigned short tbsts;
+	unsigned short tbphshr;
+	unsigned short tbphs;
+	unsigned short tbcnt;
+	unsigned short tbprd;
+	unsigned short res1;
+	unsigned short cmpctl;
+	unsigned short cmpahr;
+	unsigned short cmpa;
+	unsigned short cmpb;
+	unsigned short aqctla;
+	unsigned short aqctlb;
+	unsigned short aqsfrc;
+	unsigned short aqcsfrc;
+	unsigned short dbctl;
+	unsigned short dbred;
+	unsigned short dbfed;
+	unsigned short tzsel;
+	unsigned short tzctl;
+	unsigned short tzflg;
+	unsigned short tzclr;
+	unsigned short tzfrc;
+	unsigned short etsel;
+	unsigned short etps;
+	unsigned short etflg;
+	unsigned short etclr;
+	unsigned short etfrc;
+	unsigned short pcctl;
+	unsigned int res2[66];
+	unsigned short hrcnfg;
+};
+
+/* Capture Control register 2 */
+#define ECTRL2_SYNCOSEL_MASK	(0x03 << 6)
+#define ECTRL2_MDSL_ECAP	BIT(9)
+#define ECTRL2_CTRSTP_FREERUN	BIT(4)
+#define ECTRL2_PLSL_LOW		BIT(10)
+#define ECTRL2_SYNC_EN		BIT(5)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#endif /* _AM33XX_CPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/ddr_defs.h
new file mode 100644
index 000000000..15a5b641f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -0,0 +1,383 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ddr_defs.h
+ *
+ * ddr specific header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef _DDR_DEFS_H
+#define _DDR_DEFS_H
+
+#include <asm/arch/hardware.h>
+#include <asm/emif.h>
+
+/* AM335X EMIF Register values */
+#define VTP_CTRL_READY		(0x1 << 5)
+#define VTP_CTRL_ENABLE		(0x1 << 6)
+#define VTP_CTRL_START_EN	(0x1)
+#ifdef CONFIG_AM43XX
+#define DDR_CKE_CTRL_NORMAL	0x3
+#else
+#define DDR_CKE_CTRL_NORMAL	0x1
+#endif
+#define PHY_EN_DYN_PWRDN	(0x1 << 20)
+
+/* Micron MT47H128M16RT-25E */
+#define MT47H128M16RT25E_EMIF_READ_LATENCY	0x100005
+#define MT47H128M16RT25E_EMIF_TIM1		0x0666B3C9
+#define MT47H128M16RT25E_EMIF_TIM2		0x243631CA
+#define MT47H128M16RT25E_EMIF_TIM3		0x0000033F
+#define MT47H128M16RT25E_EMIF_SDCFG		0x41805332
+#define MT47H128M16RT25E_EMIF_SDREF		0x0000081a
+#define MT47H128M16RT25E_RATIO			0x80
+#define MT47H128M16RT25E_RD_DQS			0x12
+#define MT47H128M16RT25E_PHY_WR_DATA		0x40
+#define MT47H128M16RT25E_PHY_FIFO_WE		0x80
+#define MT47H128M16RT25E_IOCTRL_VALUE		0x18B
+
+/* Micron MT41J128M16JT-125 */
+#define MT41J128MJT125_EMIF_READ_LATENCY	0x100006
+#define MT41J128MJT125_EMIF_TIM1		0x0888A39B
+#define MT41J128MJT125_EMIF_TIM2		0x26337FDA
+#define MT41J128MJT125_EMIF_TIM3		0x501F830F
+#define MT41J128MJT125_EMIF_SDCFG		0x61C04AB2
+#define MT41J128MJT125_EMIF_SDREF		0x0000093B
+#define MT41J128MJT125_ZQ_CFG			0x50074BE4
+#define MT41J128MJT125_RATIO			0x40
+#define MT41J128MJT125_INVERT_CLKOUT		0x1
+#define MT41J128MJT125_RD_DQS			0x3B
+#define MT41J128MJT125_WR_DQS			0x85
+#define MT41J128MJT125_PHY_WR_DATA		0xC1
+#define MT41J128MJT125_PHY_FIFO_WE		0x100
+#define MT41J128MJT125_IOCTRL_VALUE		0x18B
+
+/* Micron MT41J128M16JT-125 at 400MHz*/
+#define MT41J128MJT125_EMIF_READ_LATENCY_400MHz	0x100007
+#define MT41J128MJT125_EMIF_TIM1_400MHz		0x0AAAD4DB
+#define MT41J128MJT125_EMIF_TIM2_400MHz		0x26437FDA
+#define MT41J128MJT125_EMIF_TIM3_400MHz		0x501F83FF
+#define MT41J128MJT125_EMIF_SDCFG_400MHz	0x61C052B2
+#define MT41J128MJT125_EMIF_SDREF_400MHz	0x00000C30
+#define MT41J128MJT125_ZQ_CFG_400MHz		0x50074BE4
+#define MT41J128MJT125_RATIO_400MHz		0x80
+#define MT41J128MJT125_INVERT_CLKOUT_400MHz	0x0
+#define MT41J128MJT125_RD_DQS_400MHz		0x3A
+#define MT41J128MJT125_WR_DQS_400MHz		0x3B
+#define MT41J128MJT125_PHY_WR_DATA_400MHz	0x76
+#define MT41J128MJT125_PHY_FIFO_WE_400MHz	0x96
+
+/* Micron MT41K128M16JT-187E */
+#define MT41K128MJT187E_EMIF_READ_LATENCY	0x06
+#define MT41K128MJT187E_EMIF_TIM1		0x0888B3DB
+#define MT41K128MJT187E_EMIF_TIM2		0x36337FDA
+#define MT41K128MJT187E_EMIF_TIM3		0x501F830F
+#define MT41K128MJT187E_EMIF_SDCFG		0x61C04AB2
+#define MT41K128MJT187E_EMIF_SDREF		0x0000093B
+#define MT41K128MJT187E_ZQ_CFG			0x50074BE4
+#define MT41K128MJT187E_RATIO			0x40
+#define MT41K128MJT187E_INVERT_CLKOUT		0x1
+#define MT41K128MJT187E_RD_DQS			0x3B
+#define MT41K128MJT187E_WR_DQS			0x85
+#define MT41K128MJT187E_PHY_WR_DATA		0xC1
+#define MT41K128MJT187E_PHY_FIFO_WE		0x100
+#define MT41K128MJT187E_IOCTRL_VALUE		0x18B
+
+/* Micron MT41K128M16JT-125 IT:K (256 MB) at 400MHz */
+#define MT41K128M16JT125K_EMIF_READ_LATENCY     0x07
+#define MT41K128M16JT125K_EMIF_TIM1             0x0AAAD4DB
+#define MT41K128M16JT125K_EMIF_TIM2             0x2A437FDA
+#define MT41K128M16JT125K_EMIF_TIM3             0x501F83FF
+#define MT41K128M16JT125K_EMIF_SDCFG            0x61A052B2
+#define MT41K128M16JT125K_EMIF_SDREF            0x00000C30
+#define MT41K128M16JT125K_ZQ_CFG                0x50074BE4
+#define MT41K128M16JT125K_RATIO                 0x80
+#define MT41K128M16JT125K_INVERT_CLKOUT         0x0
+#define MT41K128M16JT125K_RD_DQS                0x38
+#define MT41K128M16JT125K_WR_DQS                0x46
+#define MT41K128M16JT125K_PHY_WR_DATA           0x7D
+#define MT41K128M16JT125K_PHY_FIFO_WE           0x9B
+#define MT41K128M16JT125K_IOCTRL_VALUE          0x18B
+
+/* Micron MT41J64M16JT-125 */
+#define MT41J64MJT125_EMIF_SDCFG		0x61C04A32
+
+/* Micron MT41J256M16JT-125 */
+#define MT41J256MJT125_EMIF_SDCFG		0x61C04B32
+
+/* Micron MT41J256M8HX-15E */
+#define MT41J256M8HX15E_EMIF_READ_LATENCY	0x100006
+#define MT41J256M8HX15E_EMIF_TIM1		0x0888A39B
+#define MT41J256M8HX15E_EMIF_TIM2		0x26337FDA
+#define MT41J256M8HX15E_EMIF_TIM3		0x501F830F
+#define MT41J256M8HX15E_EMIF_SDCFG		0x61C04B32
+#define MT41J256M8HX15E_EMIF_SDREF		0x0000093B
+#define MT41J256M8HX15E_ZQ_CFG			0x50074BE4
+#define MT41J256M8HX15E_RATIO			0x40
+#define MT41J256M8HX15E_INVERT_CLKOUT		0x1
+#define MT41J256M8HX15E_RD_DQS			0x3B
+#define MT41J256M8HX15E_WR_DQS			0x85
+#define MT41J256M8HX15E_PHY_WR_DATA		0xC1
+#define MT41J256M8HX15E_PHY_FIFO_WE		0x100
+#define MT41J256M8HX15E_IOCTRL_VALUE		0x18B
+
+/* Micron MT41K256M16HA-125E */
+#define MT41K256M16HA125E_EMIF_READ_LATENCY	0x100007
+#define MT41K256M16HA125E_EMIF_TIM1		0x0AAAD4DB
+#define MT41K256M16HA125E_EMIF_TIM2		0x266B7FDA
+#define MT41K256M16HA125E_EMIF_TIM3		0x501F867F
+#define MT41K256M16HA125E_EMIF_SDCFG		0x61C05332
+#define MT41K256M16HA125E_EMIF_SDREF		0xC30
+#define MT41K256M16HA125E_ZQ_CFG		0x50074BE4
+#define MT41K256M16HA125E_RATIO			0x80
+#define MT41K256M16HA125E_INVERT_CLKOUT		0x0
+#define MT41K256M16HA125E_RD_DQS		0x38
+#define MT41K256M16HA125E_WR_DQS		0x44
+#define MT41K256M16HA125E_PHY_WR_DATA		0x7D
+#define MT41K256M16HA125E_PHY_FIFO_WE		0x94
+#define MT41K256M16HA125E_IOCTRL_VALUE		0x18B
+
+/* Micron MT41J512M8RH-125 on EVM v1.5 */
+#define MT41J512M8RH125_EMIF_READ_LATENCY	0x100006
+#define MT41J512M8RH125_EMIF_TIM1		0x0888A39B
+#define MT41J512M8RH125_EMIF_TIM2		0x26517FDA
+#define MT41J512M8RH125_EMIF_TIM3		0x501F84EF
+#define MT41J512M8RH125_EMIF_SDCFG		0x61C04BB2
+#define MT41J512M8RH125_EMIF_SDREF		0x0000093B
+#define MT41J512M8RH125_ZQ_CFG			0x50074BE4
+#define MT41J512M8RH125_RATIO			0x80
+#define MT41J512M8RH125_INVERT_CLKOUT		0x0
+#define MT41J512M8RH125_RD_DQS			0x3B
+#define MT41J512M8RH125_WR_DQS			0x3C
+#define MT41J512M8RH125_PHY_FIFO_WE		0xA5
+#define MT41J512M8RH125_PHY_WR_DATA		0x74
+#define MT41J512M8RH125_IOCTRL_VALUE		0x18B
+
+/* Samsung K4B2G1646E-BIH9 */
+#define K4B2G1646EBIH9_EMIF_READ_LATENCY	0x100007
+#define K4B2G1646EBIH9_EMIF_TIM1		0x0AAAE51B
+#define K4B2G1646EBIH9_EMIF_TIM2		0x2A1D7FDA
+#define K4B2G1646EBIH9_EMIF_TIM3		0x501F83FF
+#define K4B2G1646EBIH9_EMIF_SDCFG		0x61C052B2
+#define K4B2G1646EBIH9_EMIF_SDREF		0x00000C30
+#define K4B2G1646EBIH9_ZQ_CFG			0x50074BE4
+#define K4B2G1646EBIH9_RATIO			0x80
+#define K4B2G1646EBIH9_INVERT_CLKOUT		0x0
+#define K4B2G1646EBIH9_RD_DQS			0x35
+#define K4B2G1646EBIH9_WR_DQS			0x3A
+#define K4B2G1646EBIH9_PHY_FIFO_WE		0x97
+#define K4B2G1646EBIH9_PHY_WR_DATA		0x76
+#define K4B2G1646EBIH9_IOCTRL_VALUE		0x18B
+
+#define  LPDDR2_ADDRCTRL_IOCTRL_VALUE   0x294
+#define  LPDDR2_ADDRCTRL_WD0_IOCTRL_VALUE 0x00000000
+#define  LPDDR2_ADDRCTRL_WD1_IOCTRL_VALUE 0x00000000
+#define  LPDDR2_DATA0_IOCTRL_VALUE   0x20000294
+#define  LPDDR2_DATA1_IOCTRL_VALUE   0x20000294
+#define  LPDDR2_DATA2_IOCTRL_VALUE   0x20000294
+#define  LPDDR2_DATA3_IOCTRL_VALUE   0x20000294
+
+#define  DDR3_ADDRCTRL_WD0_IOCTRL_VALUE 0x00000000
+#define  DDR3_ADDRCTRL_WD1_IOCTRL_VALUE 0x00000000
+#define  DDR3_ADDRCTRL_IOCTRL_VALUE   0x84
+#define  DDR3_DATA0_IOCTRL_VALUE   0x84
+#define  DDR3_DATA1_IOCTRL_VALUE   0x84
+#define  DDR3_DATA2_IOCTRL_VALUE   0x84
+#define  DDR3_DATA3_IOCTRL_VALUE   0x84
+
+/**
+ * Configure DMM
+ */
+void config_dmm(const struct dmm_lisa_map_regs *regs);
+
+/**
+ * Configure SDRAM
+ */
+void config_sdram(const struct emif_regs *regs, int nr);
+void config_sdram_emif4d5(const struct emif_regs *regs, int nr);
+
+/**
+ * Set SDRAM timings
+ */
+void set_sdram_timings(const struct emif_regs *regs, int nr);
+
+/**
+ * Configure DDR PHY
+ */
+void config_ddr_phy(const struct emif_regs *regs, int nr);
+
+struct ddr_cmd_regs {
+	unsigned int resv0[7];
+	unsigned int cm0csratio;	/* offset 0x01C */
+	unsigned int resv1[3];
+	unsigned int cm0iclkout;	/* offset 0x02C */
+	unsigned int resv2[8];
+	unsigned int cm1csratio;	/* offset 0x050 */
+	unsigned int resv3[3];
+	unsigned int cm1iclkout;	/* offset 0x060 */
+	unsigned int resv4[8];
+	unsigned int cm2csratio;	/* offset 0x084 */
+	unsigned int resv5[3];
+	unsigned int cm2iclkout;	/* offset 0x094 */
+	unsigned int resv6[3];
+};
+
+struct ddr_data_regs {
+	unsigned int dt0rdsratio0;	/* offset 0x0C8 */
+	unsigned int resv1[4];
+	unsigned int dt0wdsratio0;	/* offset 0x0DC */
+	unsigned int resv2[4];
+	unsigned int dt0wiratio0;	/* offset 0x0F0 */
+	unsigned int resv3;
+	unsigned int dt0wimode0;	/* offset 0x0F8 */
+	unsigned int dt0giratio0;	/* offset 0x0FC */
+	unsigned int resv4;
+	unsigned int dt0gimode0;	/* offset 0x104 */
+	unsigned int dt0fwsratio0;	/* offset 0x108 */
+	unsigned int resv5[4];
+	unsigned int dt0dqoffset;	/* offset 0x11C */
+	unsigned int dt0wrsratio0;	/* offset 0x120 */
+	unsigned int resv6[4];
+	unsigned int dt0rdelays0;	/* offset 0x134 */
+	unsigned int dt0dldiff0;	/* offset 0x138 */
+	unsigned int resv7[12];
+};
+
+/**
+ * This structure represents the DDR registers on AM33XX devices.
+ * We make use of DDR_PHY_BASE_ADDR2 to address the DATA1 registers that
+ * correspond to DATA1 registers defined here.
+ */
+struct ddr_regs {
+	unsigned int resv0[3];
+	unsigned int cm0config;		/* offset 0x00C */
+	unsigned int cm0configclk;	/* offset 0x010 */
+	unsigned int resv1[2];
+	unsigned int cm0csratio;	/* offset 0x01C */
+	unsigned int resv2[3];
+	unsigned int cm0iclkout;	/* offset 0x02C */
+	unsigned int resv3[4];
+	unsigned int cm1config;		/* offset 0x040 */
+	unsigned int cm1configclk;	/* offset 0x044 */
+	unsigned int resv4[2];
+	unsigned int cm1csratio;	/* offset 0x050 */
+	unsigned int resv5[3];
+	unsigned int cm1iclkout;	/* offset 0x060 */
+	unsigned int resv6[4];
+	unsigned int cm2config;		/* offset 0x074 */
+	unsigned int cm2configclk;	/* offset 0x078 */
+	unsigned int resv7[2];
+	unsigned int cm2csratio;	/* offset 0x084 */
+	unsigned int resv8[3];
+	unsigned int cm2iclkout;	/* offset 0x094 */
+	unsigned int resv9[12];
+	unsigned int dt0rdsratio0;	/* offset 0x0C8 */
+	unsigned int resv10[4];
+	unsigned int dt0wdsratio0;	/* offset 0x0DC */
+	unsigned int resv11[4];
+	unsigned int dt0wiratio0;	/* offset 0x0F0 */
+	unsigned int resv12;
+	unsigned int dt0wimode0;	/* offset 0x0F8 */
+	unsigned int dt0giratio0;	/* offset 0x0FC */
+	unsigned int resv13;
+	unsigned int dt0gimode0;	/* offset 0x104 */
+	unsigned int dt0fwsratio0;	/* offset 0x108 */
+	unsigned int resv14[4];
+	unsigned int dt0dqoffset;	/* offset 0x11C */
+	unsigned int dt0wrsratio0;	/* offset 0x120 */
+	unsigned int resv15[4];
+	unsigned int dt0rdelays0;	/* offset 0x134 */
+	unsigned int dt0dldiff0;	/* offset 0x138 */
+};
+
+/**
+ * Encapsulates DDR CMD control registers.
+ */
+struct cmd_control {
+	unsigned long cmd0csratio;
+	unsigned long cmd0csforce;
+	unsigned long cmd0csdelay;
+	unsigned long cmd0iclkout;
+	unsigned long cmd1csratio;
+	unsigned long cmd1csforce;
+	unsigned long cmd1csdelay;
+	unsigned long cmd1iclkout;
+	unsigned long cmd2csratio;
+	unsigned long cmd2csforce;
+	unsigned long cmd2csdelay;
+	unsigned long cmd2iclkout;
+};
+
+/**
+ * Encapsulates DDR DATA registers.
+ */
+struct ddr_data {
+	unsigned long datardsratio0;
+	unsigned long datawdsratio0;
+	unsigned long datawiratio0;
+	unsigned long datagiratio0;
+	unsigned long datafwsratio0;
+	unsigned long datawrsratio0;
+};
+
+/**
+ * Configure DDR CMD control registers
+ */
+void config_cmd_ctrl(const struct cmd_control *cmd, int nr);
+
+/**
+ * Configure DDR DATA registers
+ */
+void config_ddr_data(const struct ddr_data *data, int nr);
+
+/**
+ * This structure represents the DDR io control on AM33XX devices.
+ */
+struct ddr_cmdtctrl {
+	unsigned int cm0ioctl;
+	unsigned int cm1ioctl;
+	unsigned int cm2ioctl;
+	unsigned int resv2[12];
+	unsigned int dt0ioctl;
+	unsigned int dt1ioctl;
+	unsigned int dt2ioctrl;
+	unsigned int dt3ioctrl;
+	unsigned int resv3[4];
+	unsigned int emif_sdram_config_ext;
+};
+
+struct ctrl_ioregs {
+	unsigned int cm0ioctl;
+	unsigned int cm1ioctl;
+	unsigned int cm2ioctl;
+	unsigned int dt0ioctl;
+	unsigned int dt1ioctl;
+	unsigned int dt2ioctrl;
+	unsigned int dt3ioctrl;
+	unsigned int emif_sdram_config_ext;
+};
+
+/**
+ * Configure DDR io control registers
+ */
+void config_io_ctrl(const struct ctrl_ioregs *ioregs);
+
+struct ddr_ctrl {
+	unsigned int ddrioctrl;
+	unsigned int resv1[325];
+	unsigned int ddrckectrl;
+};
+
+#ifdef CONFIG_TI816X
+void config_ddr(const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs,
+		const struct dmm_lisa_map_regs *lisa_regs, int nrs);
+#else
+void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
+		const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs, int nr);
+#endif
+void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size);
+
+#endif  /* _DDR_DEFS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/emac_defs.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/emac_defs.h
new file mode 100644
index 000000000..eb6516da9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/emac_defs.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#ifndef _EMAC_DEFS_H_
+#define _EMAC_DEFS_H_
+
+#ifdef CONFIG_TI816X
+#define EMAC_BASE_ADDR			(0x4A100000)
+#define EMAC_WRAPPER_BASE_ADDR		(0x4A100900)
+#define EMAC_WRAPPER_RAM_ADDR		(0x4A102000)
+#define EMAC_MDIO_BASE_ADDR		(0x4A100800)
+#define EMAC_MDIO_BUS_FREQ		(250000000UL)
+#define EMAC_MDIO_CLOCK_FREQ		(2000000UL)
+
+typedef volatile unsigned int	dv_reg;
+typedef volatile unsigned int	*dv_reg_p;
+
+#define DAVINCI_EMAC_VERSION2
+#define DAVINCI_EMAC_GIG_ENABLE
+#endif
+
+#endif  /* _EMAC_DEFS_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/gpio.h
new file mode 100644
index 000000000..24dc4bb1d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/gpio.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef _GPIO_AM33xx_H
+#define _GPIO_AM33xx_H
+
+#include <asm/omap_gpio.h>
+
+#ifdef CONFIG_AM43XX
+#define OMAP_MAX_GPIO		192
+#else
+#define OMAP_MAX_GPIO		128
+#endif
+
+#define AM33XX_GPIO0_BASE       0x44E07000
+#define AM33XX_GPIO1_BASE       0x4804C000
+#define AM33XX_GPIO2_BASE       0x481AC000
+#define AM33XX_GPIO3_BASE       0x481AE000
+#define AM33XX_GPIO4_BASE	0x48320000
+#define AM33XX_GPIO5_BASE	0x48322000
+
+/* GPIO CTRL register */
+#define GPIO_CTRL_DISABLEMODULE_SHIFT	0
+#define GPIO_CTRL_DISABLEMODULE_MASK	(1 << 0)
+#define GPIO_CTRL_ENABLEMODULE		GPIO_CTRL_DISABLEMODULE_MASK
+
+/* GPIO OUTPUT ENABLE register */
+#define GPIO_OE_ENABLE(x)		(1 << x)
+
+/* GPIO SETDATAOUT register */
+#define GPIO_SETDATAOUT(x)		(1 << x)
+#endif /* _GPIO_AM33xx_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware.h
new file mode 100644
index 000000000..0508b8c91
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * hardware.h
+ *
+ * hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef __AM33XX_HARDWARE_H
+#define __AM33XX_HARDWARE_H
+
+#include <config.h>
+#include <asm/arch/omap.h>
+#ifdef CONFIG_AM33XX
+#include <asm/arch/hardware_am33xx.h>
+#elif defined(CONFIG_TI816X)
+#include <asm/arch/hardware_ti816x.h>
+#elif defined(CONFIG_TI814X)
+#include <asm/arch/hardware_ti814x.h>
+#elif defined(CONFIG_AM43XX)
+#include <asm/arch/hardware_am43xx.h>
+#endif
+
+/*
+ * Common hardware definitions
+ */
+
+/* DM Timer base addresses */
+#define DM_TIMER0_BASE			0x4802C000
+#define DM_TIMER1_BASE			0x4802E000
+#define DM_TIMER2_BASE			0x48040000
+#define DM_TIMER3_BASE			0x48042000
+#define DM_TIMER4_BASE			0x48044000
+#define DM_TIMER5_BASE			0x48046000
+#define DM_TIMER6_BASE			0x48048000
+#define DM_TIMER7_BASE			0x4804A000
+
+/* GPIO Base address */
+#define GPIO0_BASE			0x48032000
+#define GPIO1_BASE			0x4804C000
+
+/* BCH Error Location Module */
+#define ELM_BASE			0x48080000
+
+/* EMIF Base address */
+#define EMIF4_0_CFG_BASE		0x4C000000
+#define EMIF4_1_CFG_BASE		0x4D000000
+
+/* DDR Base address */
+#define DDR_CTRL_ADDR			0x44E10E04
+#define DDR_CONTROL_BASE_ADDR		0x44E11404
+
+/* UART */
+#if CONFIG_CONS_INDEX == 1
+#	define DEFAULT_UART_BASE UART0_BASE
+#elif CONFIG_CONS_INDEX == 2
+#	define DEFAULT_UART_BASE UART1_BASE
+#elif CONFIG_CONS_INDEX == 3
+#	define DEFAULT_UART_BASE UART2_BASE
+#elif CONFIG_CONS_INDEX == 4
+#	define DEFAULT_UART_BASE UART3_BASE
+#elif CONFIG_CONS_INDEX == 5
+#	define DEFAULT_UART_BASE UART4_BASE
+#elif CONFIG_CONS_INDEX == 6
+#	define DEFAULT_UART_BASE UART5_BASE
+#endif
+
+/* GPMC Base address */
+#define GPMC_BASE			0x50000000
+
+/* CPSW Config space */
+#define CPSW_BASE			0x4A100000
+
+/* Control status register */
+#define CTRL_CRYSTAL_FREQ_SRC_MASK		(1 << 31)
+#define CTRL_CRYSTAL_FREQ_SRC_SHIFT		31
+#define CTRL_CRYSTAL_FREQ_SELECTION_MASK	(0x3 << 29)
+#define CTRL_CRYSTAL_FREQ_SELECTION_SHIFT	29
+#define CTRL_SYSBOOT_15_14_MASK			(0x3 << 22)
+#define CTRL_SYSBOOT_15_14_SHIFT		22
+
+#define CTRL_CRYSTAL_FREQ_SRC_SYSBOOT		0x0
+#define CTRL_CRYSTAL_FREQ_SRC_EFUSE		0x1
+
+#define NUM_CRYSTAL_FREQ			0x4
+
+int clk_get(int clk);
+#endif /* __AM33XX_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
new file mode 100644
index 000000000..878ef3e5d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * hardware_am33xx.h
+ *
+ * AM33xx hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef __AM33XX_HARDWARE_AM33XX_H
+#define __AM33XX_HARDWARE_AM33XX_H
+
+/* Module base addresses */
+
+/* UART Base Address */
+#define UART0_BASE			0x44E09000
+#define UART1_BASE			0x48022000
+#define UART2_BASE			0x48024000
+#define UART3_BASE			0x481A6000
+#define UART4_BASE			0x481A8000
+#define UART5_BASE			0x481AA000
+
+/* GPIO Base address */
+#define GPIO2_BASE			0x481AC000
+
+/* Watchdog Timer */
+#define WDT_BASE			0x44E35000
+
+/* Control Module Base Address */
+#define CTRL_BASE			0x44E10000
+#define CTRL_DEVICE_BASE		0x44E10600
+
+/* PRCM Base Address */
+#define PRCM_BASE			0x44E00000
+#define CM_PER				0x44E00000
+#define CM_WKUP				0x44E00400
+#define CM_DPLL				0x44E00500
+#define CM_RTC				0x44E00800
+
+#define PRM_RSTCTRL			(PRCM_BASE + 0x0F00)
+#define PRM_RSTST			(PRM_RSTCTRL + 8)
+
+/* VTP Base address */
+#define VTP0_CTRL_ADDR			0x44E10E0C
+#define VTP1_CTRL_ADDR			0x48140E10
+#define PRM_DEVICE_INST			0x44E00F00
+
+/* DDR Base address */
+#define DDR_PHY_CMD_ADDR		0x44E12000
+#define DDR_PHY_DATA_ADDR		0x44E120C8
+#define DDR_PHY_CMD_ADDR2		0x47C0C800
+#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
+#define DDR_DATA_REGS_NR		2
+
+#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
+#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
+
+/* CPSW Config space */
+#define CPSW_MDIO_BASE			0x4A101000
+
+/* RTC base address */
+#define RTC_BASE			0x44E3E000
+
+/* OTG */
+#define USB0_OTG_BASE			0x47401000
+#define USB1_OTG_BASE			0x47401800
+
+/* LCD Controller */
+#define LCD_CNTL_BASE			0x4830E000
+
+/* PWMSS */
+#define PWMSS0_BASE			0x48300000
+#define AM33XX_ECAP0_BASE		0x48300100
+#define AM33XX_EPWM_BASE		0x48300200
+
+#endif /* __AM33XX_HARDWARE_AM33XX_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
new file mode 100644
index 000000000..0b73ebdbb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * hardware_am43xx.h
+ *
+ * AM43xx hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef __AM43XX_HARDWARE_AM43XX_H
+#define __AM43XX_HARDWARE_AM43XX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/* Module base addresses */
+
+/* L3 Fast Configuration Bandwidth Limiter Base Address */
+#define L3F_CFG_BWLIMITER		0x44005200
+
+/* UART Base Address */
+#define UART0_BASE			0x44E09000
+
+/* GPIO Base address */
+#define GPIO2_BASE			0x481AC000
+
+/* Watchdog Timer */
+#define WDT_BASE			0x44E35000
+
+/* Control Module Base Address */
+#define CTRL_BASE			0x44E10000
+#define CTRL_DEVICE_BASE		0x44E10600
+
+/* PRCM Base Address */
+#define PRCM_BASE			0x44DF0000
+#define	CM_WKUP				0x44DF2800
+#define	CM_PER				0x44DF8800
+#define CM_DPLL				0x44DF4200
+#define CM_RTC				0x44DF8500
+
+#define PRM_RSTCTRL			(PRCM_BASE + 0x4000)
+#define PRM_RSTST			(PRM_RSTCTRL + 4)
+
+/* VTP Base address */
+#define VTP0_CTRL_ADDR			0x44E10E0C
+#define VTP1_CTRL_ADDR			0x48140E10
+
+/* USB CTRL Base Address */
+#define USB1_CTRL			0x44e10628
+#define USB1_CTRL_CM_PWRDN		BIT(0)
+#define USB1_CTRL_OTG_PWRDN		BIT(1)
+
+/* DDR Base address */
+#define DDR_PHY_CMD_ADDR		0x44E12000
+#define DDR_PHY_DATA_ADDR		0x44E120C8
+#define DDR_PHY_CMD_ADDR2		0x47C0C800
+#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
+#define DDR_DATA_REGS_NR		2
+
+/* CPSW Config space */
+#define CPSW_MDIO_BASE			0x4A101000
+
+/* RTC base address */
+#define RTC_BASE			0x44E3E000
+
+/* USB OTG */
+#define USB_OTG_SS1_BASE		0x48390000
+#define USB_OTG_SS1_GLUE_BASE		0x48380000
+#define USB2_PHY1_POWER			0x44E10620
+
+#define USB_OTG_SS2_BASE		0x483D0000
+#define USB_OTG_SS2_GLUE_BASE		0x483C0000
+#define USB2_PHY2_POWER			0x44E10628
+
+/* USB Clock Control */
+#define PRM_PER_USB_OTG_SS0_CLKCTRL (CM_PER + 0x260)
+#define PRM_PER_USB_OTG_SS1_CLKCTRL (CM_PER + 0x268)
+#define USBOTGSSX_CLKCTRL_MODULE_EN	(1 << 1)
+#define USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960 (1 << 8)
+
+#define PRM_PER_USBPHYOCP2SCP0_CLKCTRL (CM_PER + 0x5b8)
+#define PRM_PER_USBPHYOCP2SCP1_CLKCTRL (CM_PER + 0x5c0)
+#define USBPHYOCPSCP_MODULE_EN	(1 << 1)
+#define CM_DEVICE_INST			0x44df4100
+#define PRM_DEVICE_INST			0x44df4000
+
+#define	USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960	(1 << 8)
+#define	USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K	(1 << 8)
+
+/* EDMA3 Base Address */
+#define EDMA3_BASE				0x49000000
+
+#endif /* __AM43XX_HARDWARE_AM43XX_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
new file mode 100644
index 000000000..b00d592bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * hardware_ti814x.h
+ *
+ * TI814x hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef __AM33XX_HARDWARE_TI814X_H
+#define __AM33XX_HARDWARE_TI814X_H
+
+/* Module base addresses */
+
+/* UART Base Address */
+#define UART0_BASE			0x48020000
+
+/* Watchdog Timer */
+#define WDT_BASE			0x481C7000
+
+/* Control Module Base Address */
+#define CTRL_BASE			0x48140000
+#define CTRL_DEVICE_BASE		0x48140600
+
+/* PRCM Base Address */
+#define PRCM_BASE			0x48180000
+#define CM_PER				0x44E00000
+#define CM_WKUP				0x44E00400
+
+#define PRM_RSTCTRL			(PRCM_BASE + 0x00A0)
+#define PRM_RSTST			(PRM_RSTCTRL + 8)
+
+/* PLL Subsystem Base Address */
+#define PLL_SUBSYS_BASE			0x481C5000
+
+/* VTP Base address */
+#define VTP0_CTRL_ADDR			0x48140E0C
+#define VTP1_CTRL_ADDR			0x48140E10
+
+/* DDR Base address */
+#define DDR_PHY_CMD_ADDR		0x47C0C400
+#define DDR_PHY_DATA_ADDR		0x47C0C4C8
+#define DDR_PHY_CMD_ADDR2		0x47C0C800
+#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
+#define DDR_DATA_REGS_NR		4
+
+#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
+#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
+
+/* CPSW Config space */
+#define CPSW_MDIO_BASE			0x4A100800
+
+/* RTC base address */
+#define RTC_BASE			0x480C0000
+
+/* OTG */
+#define USB0_OTG_BASE			0x47401000
+#define USB1_OTG_BASE			0x47401800
+
+#endif /* __AM33XX_HARDWARE_TI814X_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
new file mode 100644
index 000000000..78b79486e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
@@ -0,0 +1,62 @@
+/*
+ * hardware_ti816x.h
+ *
+ * TI816x hardware specific header
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ * Based on TI-PSP-04.00.02.14
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AM33XX_HARDWARE_TI816X_H
+#define __AM33XX_HARDWARE_TI816X_H
+
+/* UART */
+#define UART0_BASE		0x48020000
+#define UART1_BASE		0x48022000
+#define UART2_BASE		0x48024000
+
+/* Watchdog Timer */
+#define WDT_BASE		0x480C2000
+
+/* Control Module Base Address */
+#define CTRL_BASE		0x48140000
+#define CTRL_DEVICE_BASE	0x48140600
+
+/* PRCM Base Address */
+#define PRCM_BASE		0x48180000
+
+#define PRM_RSTCTRL		(PRCM_BASE + 0x00A0)
+#define PRM_RSTST		(PRM_RSTCTRL + 8)
+
+/* VTP Base address */
+#define VTP0_CTRL_ADDR		0x48198358
+#define VTP1_CTRL_ADDR		0x4819A358
+
+/* DDR Base address */
+#define DDR_PHY_CMD_ADDR	0x48198000
+#define DDR_PHY_DATA_ADDR	0x481980C8
+#define DDR_PHY_CMD_ADDR2	0x4819A000
+#define DDR_PHY_DATA_ADDR2	0x4819A0C8
+#define DDR_DATA_REGS_NR	4
+
+
+#define DDRPHY_0_CONFIG_BASE	0x48198000
+#define DDRPHY_1_CONFIG_BASE	0x4819A000
+#define DDRPHY_CONFIG_BASE	((emif == 0) ? \
+	DDRPHY_0_CONFIG_BASE : DDRPHY_1_CONFIG_BASE)
+
+/* RTC base address */
+#define RTC_BASE		0x480C0000
+
+#endif /* __AM33XX_HARDWARE_TI816X_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/i2c.h
new file mode 100644
index 000000000..c2a98500d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/i2c.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef _I2C_AM33XX_H_
+#define _I2C_AM33XX_H_
+
+#include <asm/omap_i2c.h>
+
+#define  I2C_BASE1		0x44E0B000
+#define  I2C_BASE2		0x4802A000
+#define  I2C_BASE3		0x4819C000
+
+#define I2C_DEFAULT_BASE		I2C_BASE1
+
+#define I2C_IP_CLK			48000000
+#define I2C_INTERNAL_SAMPLING_CLK	12000000
+
+#endif /* _I2C_AM33XX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/mem.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mem.h
new file mode 100644
index 000000000..0fd52f82f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mem.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author
+ *		Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * Initial Code from:
+ *		Richard Woodruff <r-woodruff2@ti.com>
+ */
+
+#ifndef _MEM_H_
+#define _MEM_H_
+
+/*
+ * GPMC settings -
+ * Definitions is as per the following format
+ * #define <PART>_GPMC_CONFIG<x> <value>
+ * Where:
+ * PART is the part name e.g. STNOR - Intel Strata Flash
+ * x is GPMC config registers from 1 to 6 (there will be 6 macros)
+ * Value is corresponding value
+ *
+ * For every valid PRCM configuration there should be only one definition of
+ * the same. if values are independent of the board, this definition will be
+ * present in this file if values are dependent on the board, then this should
+ * go into corresponding mem-boardName.h file
+ *
+ * Currently valid part Names are (PART):
+ * M_NAND - Micron NAND
+ * STNOR - STMicrolelctronics M29W128GL
+ */
+#define GPMC_SIZE_256M		0x0
+#define GPMC_SIZE_128M		0x8
+#define GPMC_SIZE_64M		0xC
+#define GPMC_SIZE_32M		0xE
+#define GPMC_SIZE_16M		0xF
+
+#define M_NAND_GPMC_CONFIG1	0x00000800
+#define M_NAND_GPMC_CONFIG2	0x001e1e00
+#define M_NAND_GPMC_CONFIG3	0x001e1e00
+#define M_NAND_GPMC_CONFIG4	0x16051807
+#define M_NAND_GPMC_CONFIG5	0x00151e1e
+#define M_NAND_GPMC_CONFIG6	0x16000f80
+#define M_NAND_GPMC_CONFIG7	0x00000008
+
+#define STNOR_GPMC_CONFIG1	0x00001200
+#define STNOR_GPMC_CONFIG2	0x00101000
+#define STNOR_GPMC_CONFIG3	0x00030301
+#define STNOR_GPMC_CONFIG4	0x10041004
+#define STNOR_GPMC_CONFIG5	0x000C1010
+#define STNOR_GPMC_CONFIG6	0x08070280
+#define STNOR_GPMC_CONFIG7	0x00000F48
+
+/* max number of GPMC Chip Selects */
+#define GPMC_MAX_CS		8
+/* max number of GPMC regs */
+#define GPMC_MAX_REG		7
+
+#define DBG_MPDB		6
+
+#endif /* endif _MEM_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
new file mode 100644
index 000000000..5a2ea8fae
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
@@ -0,0 +1,35 @@
+/*
+ * mmc_host_def.h
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MMC_HOST_DEF_H
+#define MMC_HOST_DEF_H
+
+#include <asm/omap_mmc.h>
+
+/*
+ * OMAP HSMMC register definitions
+ */
+#define OMAP_HSMMC1_BASE		0x48060000
+#define OMAP_HSMMC2_BASE		0x481D8000
+
+#if defined(CONFIG_TI814X)
+#undef MMC_CLOCK_REFERENCE
+#define MMC_CLOCK_REFERENCE	192 /* MHz */
+#elif defined(CONFIG_TI816X)
+#undef MMC_CLOCK_REFERENCE
+#define MMC_CLOCK_REFERENCE	48 /* MHz */
+#endif
+
+#endif /* MMC_HOST_DEF_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux.h
new file mode 100644
index 000000000..b16b18473
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux.h
@@ -0,0 +1,46 @@
+/*
+ * mux.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_H_
+#define _MUX_H_
+
+#include <asm/io.h>
+
+#ifdef CONFIG_AM33XX
+#include <asm/arch/mux_am33xx.h>
+#elif defined(CONFIG_TI814X)
+#include <asm/arch/mux_ti814x.h>
+#elif defined(CONFIG_TI816X)
+#include <asm/arch/mux_ti816x.h>
+#elif defined(CONFIG_AM43XX)
+#include <asm/arch/mux_am43xx.h>
+#endif
+
+struct module_pin_mux {
+	short reg_offset;
+	unsigned int val;
+};
+
+/* Pad control register offset */
+#define PAD_CTRL_BASE	0x800
+#define OFFSET(x)	(unsigned int) (&((struct pad_signals *)\
+				(PAD_CTRL_BASE))->x)
+
+/*
+ * Configure the pin mux for the module
+ */
+void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux);
+
+#endif /* endif _MUX_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_am33xx.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_am33xx.h
new file mode 100644
index 000000000..26bd4b46f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_am33xx.h
@@ -0,0 +1,246 @@
+/*
+ * mux_am33xx.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_AM33XX_H_
+#define _MUX_AM33XX_H_
+
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset)	\
+	__raw_writel(value, (CTRL_BASE + offset));
+
+/* PAD Control Fields */
+#define SLEWCTRL	(0x1 << 6)
+#define RXACTIVE	(0x1 << 5)
+#define PULLDOWN_EN	(0x0 << 4) /* Pull Down Selection */
+#define PULLUP_EN	(0x1 << 4) /* Pull Up Selection */
+#define PULLUDEN	(0x0 << 3) /* Pull up enabled */
+#define PULLUDDIS	(0x1 << 3) /* Pull up disabled */
+#define MODE(val)	val	/* used for Readability */
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+	int gpmc_ad0;
+	int gpmc_ad1;
+	int gpmc_ad2;
+	int gpmc_ad3;
+	int gpmc_ad4;
+	int gpmc_ad5;
+	int gpmc_ad6;
+	int gpmc_ad7;
+	int gpmc_ad8;
+	int gpmc_ad9;
+	int gpmc_ad10;
+	int gpmc_ad11;
+	int gpmc_ad12;
+	int gpmc_ad13;
+	int gpmc_ad14;
+	int gpmc_ad15;
+	int gpmc_a0;
+	int gpmc_a1;
+	int gpmc_a2;
+	int gpmc_a3;
+	int gpmc_a4;
+	int gpmc_a5;
+	int gpmc_a6;
+	int gpmc_a7;
+	int gpmc_a8;
+	int gpmc_a9;
+	int gpmc_a10;
+	int gpmc_a11;
+	int gpmc_wait0;
+	int gpmc_wpn;
+	int gpmc_be1n;
+	int gpmc_csn0;
+	int gpmc_csn1;
+	int gpmc_csn2;
+	int gpmc_csn3;
+	int gpmc_clk;
+	int gpmc_advn_ale;
+	int gpmc_oen_ren;
+	int gpmc_wen;
+	int gpmc_be0n_cle;
+	int lcd_data0;
+	int lcd_data1;
+	int lcd_data2;
+	int lcd_data3;
+	int lcd_data4;
+	int lcd_data5;
+	int lcd_data6;
+	int lcd_data7;
+	int lcd_data8;
+	int lcd_data9;
+	int lcd_data10;
+	int lcd_data11;
+	int lcd_data12;
+	int lcd_data13;
+	int lcd_data14;
+	int lcd_data15;
+	int lcd_vsync;
+	int lcd_hsync;
+	int lcd_pclk;
+	int lcd_ac_bias_en;
+	int mmc0_dat3;
+	int mmc0_dat2;
+	int mmc0_dat1;
+	int mmc0_dat0;
+	int mmc0_clk;
+	int mmc0_cmd;
+	int mii1_col;
+	int mii1_crs;
+	int mii1_rxerr;
+	int mii1_txen;
+	int mii1_rxdv;
+	int mii1_txd3;
+	int mii1_txd2;
+	int mii1_txd1;
+	int mii1_txd0;
+	int mii1_txclk;
+	int mii1_rxclk;
+	int mii1_rxd3;
+	int mii1_rxd2;
+	int mii1_rxd1;
+	int mii1_rxd0;
+	int rmii1_refclk;
+	int mdio_data;
+	int mdio_clk;
+	int spi0_sclk;
+	int spi0_d0;
+	int spi0_d1;
+	int spi0_cs0;
+	int spi0_cs1;
+	int ecap0_in_pwm0_out;
+	int uart0_ctsn;
+	int uart0_rtsn;
+	int uart0_rxd;
+	int uart0_txd;
+	int uart1_ctsn;
+	int uart1_rtsn;
+	int uart1_rxd;
+	int uart1_txd;
+	int i2c0_sda;
+	int i2c0_scl;
+	int mcasp0_aclkx;
+	int mcasp0_fsx;
+	int mcasp0_axr0;
+	int mcasp0_ahclkr;
+	int mcasp0_aclkr;
+	int mcasp0_fsr;
+	int mcasp0_axr1;
+	int mcasp0_ahclkx;
+	int xdma_event_intr0;
+	int xdma_event_intr1;
+	int nresetin_out;
+	int porz;
+	int nnmi;
+	int osc0_in;
+	int osc0_out;
+	int rsvd1;
+	int tms;
+	int tdi;
+	int tdo;
+	int tck;
+	int ntrst;
+	int emu0;
+	int emu1;
+	int osc1_in;
+	int osc1_out;
+	int pmic_power_en;
+	int rtc_porz;
+	int rsvd2;
+	int ext_wakeup;
+	int enz_kaldo_1p8v;
+	int usb0_dm;
+	int usb0_dp;
+	int usb0_ce;
+	int usb0_id;
+	int usb0_vbus;
+	int usb0_drvvbus;
+	int usb1_dm;
+	int usb1_dp;
+	int usb1_ce;
+	int usb1_id;
+	int usb1_vbus;
+	int usb1_drvvbus;
+	int ddr_resetn;
+	int ddr_csn0;
+	int ddr_cke;
+	int ddr_ck;
+	int ddr_nck;
+	int ddr_casn;
+	int ddr_rasn;
+	int ddr_wen;
+	int ddr_ba0;
+	int ddr_ba1;
+	int ddr_ba2;
+	int ddr_a0;
+	int ddr_a1;
+	int ddr_a2;
+	int ddr_a3;
+	int ddr_a4;
+	int ddr_a5;
+	int ddr_a6;
+	int ddr_a7;
+	int ddr_a8;
+	int ddr_a9;
+	int ddr_a10;
+	int ddr_a11;
+	int ddr_a12;
+	int ddr_a13;
+	int ddr_a14;
+	int ddr_a15;
+	int ddr_odt;
+	int ddr_d0;
+	int ddr_d1;
+	int ddr_d2;
+	int ddr_d3;
+	int ddr_d4;
+	int ddr_d5;
+	int ddr_d6;
+	int ddr_d7;
+	int ddr_d8;
+	int ddr_d9;
+	int ddr_d10;
+	int ddr_d11;
+	int ddr_d12;
+	int ddr_d13;
+	int ddr_d14;
+	int ddr_d15;
+	int ddr_dqm0;
+	int ddr_dqm1;
+	int ddr_dqs0;
+	int ddr_dqsn0;
+	int ddr_dqs1;
+	int ddr_dqsn1;
+	int ddr_vref;
+	int ddr_vtp;
+	int ddr_strben0;
+	int ddr_strben1;
+	int ain7;
+	int ain6;
+	int ain5;
+	int ain4;
+	int ain3;
+	int ain2;
+	int ain1;
+	int ain0;
+	int vrefp;
+	int vrefn;
+};
+
+#endif /* endif _MUX_AM33XX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_am43xx.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_am43xx.h
new file mode 100644
index 000000000..f74ae74ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_am43xx.h
@@ -0,0 +1,210 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * mux_am43xx.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#ifndef _MUX_AM43XX_H_
+#define _MUX_AM43XX_H_
+
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset)	\
+	__raw_writel(value, (CTRL_BASE + offset));
+
+/* PAD Control Fields */
+#define SLEWCTRL	(0x1 << 19)
+#define RXACTIVE	(0x1 << 18)
+#define PULLDOWN_EN	(0x0 << 17) /* Pull Down Selection */
+#define PULLUP_EN	(0x1 << 17) /* Pull Up Selection */
+#define PULLUDEN	(0x0 << 16) /* Pull up/down enable */
+#define PULLUDDIS	(0x1 << 16) /* Pull up/down disable */
+#define MODE(val)	val	/* used for Readability */
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+	int gpmc_ad0;
+	int gpmc_ad1;
+	int gpmc_ad2;
+	int gpmc_ad3;
+	int gpmc_ad4;
+	int gpmc_ad5;
+	int gpmc_ad6;
+	int gpmc_ad7;
+	int gpmc_ad8;
+	int gpmc_ad9;
+	int gpmc_ad10;
+	int gpmc_ad11;
+	int gpmc_ad12;
+	int gpmc_ad13;
+	int gpmc_ad14;
+	int gpmc_ad15;
+	int gpmc_a0;
+	int gpmc_a1;
+	int gpmc_a2;
+	int gpmc_a3;
+	int gpmc_a4;
+	int gpmc_a5;
+	int gpmc_a6;
+	int gpmc_a7;
+	int gpmc_a8;
+	int gpmc_a9;
+	int gpmc_a10;
+	int gpmc_a11;
+	int gpmc_wait0;
+	int gpmc_wpn;
+	int gpmc_be1n;
+	int gpmc_csn0;
+	int gpmc_csn1;
+	int gpmc_csn2;
+	int gpmc_csn3;
+	int gpmc_clk;
+	int gpmc_advn_ale;
+	int gpmc_oen_ren;
+	int gpmc_wen;
+	int gpmc_be0n_cle;
+	int lcd_data0;
+	int lcd_data1;
+	int lcd_data2;
+	int lcd_data3;
+	int lcd_data4;
+	int lcd_data5;
+	int lcd_data6;
+	int lcd_data7;
+	int lcd_data8;
+	int lcd_data9;
+	int lcd_data10;
+	int lcd_data11;
+	int lcd_data12;
+	int lcd_data13;
+	int lcd_data14;
+	int lcd_data15;
+	int lcd_vsync;
+	int lcd_hsync;
+	int lcd_pclk;
+	int lcd_ac_bias_en;
+	int mmc0_dat3;
+	int mmc0_dat2;
+	int mmc0_dat1;
+	int mmc0_dat0;
+	int mmc0_clk;
+	int mmc0_cmd;
+	int mii1_col;
+	int mii1_crs;
+	int mii1_rxerr;
+	int mii1_txen;
+	int mii1_rxdv;
+	int mii1_txd3;
+	int mii1_txd2;
+	int mii1_txd1;
+	int mii1_txd0;
+	int mii1_txclk;
+	int mii1_rxclk;
+	int mii1_rxd3;
+	int mii1_rxd2;
+	int mii1_rxd1;
+	int mii1_rxd0;
+	int rmii1_refclk;
+	int mdio_data;
+	int mdio_clk;
+	int spi0_sclk;
+	int spi0_d0;
+	int spi0_d1;
+	int spi0_cs0;
+	int spi0_cs1;
+	int ecap0_in_pwm0_out;
+	int uart0_ctsn;
+	int uart0_rtsn;
+	int uart0_rxd;
+	int uart0_txd;
+	int uart1_ctsn;
+	int uart1_rtsn;
+	int uart1_rxd;
+	int uart1_txd;
+	int i2c0_sda;
+	int i2c0_scl;
+	int mcasp0_aclkx;
+	int mcasp0_fsx;
+	int mcasp0_axr0;
+	int mcasp0_ahclkr;
+	int mcasp0_aclkr;
+	int mcasp0_fsr;
+	int mcasp0_axr1;
+	int mcasp0_ahclkx;
+	int cam0_hd;
+	int cam0_vd;
+	int cam0_field;
+	int cam0_wen;
+	int cam0_pclk;
+	int cam0_data8;
+	int cam0_data9;
+	int cam1_data9;
+	int cam1_data8;
+	int cam1_hd;
+	int cam1_vd;
+	int cam1_pclk;
+	int cam1_field;
+	int cam1_wen;
+	int cam1_data0;
+	int cam1_data1;
+	int cam1_data2;
+	int cam1_data3;
+	int cam1_data4;
+	int cam1_data5;
+	int cam1_data6;
+	int cam1_data7;
+	int cam0_data0;
+	int cam0_data1;
+	int cam0_data2;
+	int cam0_data3;
+	int cam0_data4;
+	int cam0_data5;
+	int cam0_data6;
+	int cam0_data7;
+	int uart3_rxd;
+	int uart3_txd;
+	int uart3_ctsn;
+	int uart3_rtsn;
+	int gpio5_8;
+	int gpio5_9;
+	int gpio5_10;
+	int gpio5_11;
+	int gpio5_12;
+	int gpio5_13;
+	int spi4_sclk;
+	int spi4_d0;
+	int spi4_d1;
+	int spi4_cs0;
+	int spi2_sclk;
+	int spi2_d0;
+	int spi2_d1;
+	int spi2_cs0;
+	int xdma_evt_intr0;
+	int xdma_evt_intr1;
+	int clkreq;
+	int nresetin_out;
+	int rsvd1;
+	int nnmi;
+	int rsvd2;
+	int rsvd3;
+	int tms;
+	int tdi;
+	int tdo;
+	int tck;
+	int ntrst;
+	int emu0;
+	int emu1;
+	int osc1_in;
+	int osc1_out;
+	int rtc_porz;
+	int ext_wakeup0;
+	int pmic_power_en0;
+	int usb0_drvvbus;
+	int usb1_drvvbus;
+};
+
+#endif /* _MUX_AM43XX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_ti814x.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_ti814x.h
new file mode 100644
index 000000000..a26e5038f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_ti814x.h
@@ -0,0 +1,311 @@
+/*
+ * mux_ti814x.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_TI814X_H_
+#define _MUX_TI814X_H_
+
+/* PAD Control Fields */
+#define PINCNTL_RSV_MSK	(0x3 << 18) /* Reserved bitmask */
+#define PULLUP_EN	(0x1 << 17) /* Pull UP Selection */
+#define PULLUDEN	(0x0 << 16) /* Pull up enabled */
+#define PULLUDDIS	(0x1 << 16) /* Pull up disabled */
+#define MODE(val)	val	/* used for Readability */
+
+#define MUX_CFG(value, offset)				\
+{							\
+	int tmp;					\
+	tmp = __raw_readl(CTRL_BASE + offset);		\
+	tmp &= PINCNTL_RSV_MSK;				\
+	__raw_writel(tmp | value, (CTRL_BASE + offset));\
+}
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+	int pincntl1;
+	int pincntl2;
+	int pincntl3;
+	int pincntl4;
+	int pincntl5;
+	int pincntl6;
+	int pincntl7;
+	int pincntl8;
+	int pincntl9;
+	int pincntl10;
+	int pincntl11;
+	int pincntl12;
+	int pincntl13;
+	int pincntl14;
+	int pincntl15;
+	int pincntl16;
+	int pincntl17;
+	int pincntl18;
+	int pincntl19;
+	int pincntl20;
+	int pincntl21;
+	int pincntl22;
+	int pincntl23;
+	int pincntl24;
+	int pincntl25;
+	int pincntl26;
+	int pincntl27;
+	int pincntl28;
+	int pincntl29;
+	int pincntl30;
+	int pincntl31;
+	int pincntl32;
+	int pincntl33;
+	int pincntl34;
+	int pincntl35;
+	int pincntl36;
+	int pincntl37;
+	int pincntl38;
+	int pincntl39;
+	int pincntl40;
+	int pincntl41;
+	int pincntl42;
+	int pincntl43;
+	int pincntl44;
+	int pincntl45;
+	int pincntl46;
+	int pincntl47;
+	int pincntl48;
+	int pincntl49;
+	int pincntl50;
+	int pincntl51;
+	int pincntl52;
+	int pincntl53;
+	int pincntl54;
+	int pincntl55;
+	int pincntl56;
+	int pincntl57;
+	int pincntl58;
+	int pincntl59;
+	int pincntl60;
+	int pincntl61;
+	int pincntl62;
+	int pincntl63;
+	int pincntl64;
+	int pincntl65;
+	int pincntl66;
+	int pincntl67;
+	int pincntl68;
+	int pincntl69;
+	int pincntl70;
+	int pincntl71;
+	int pincntl72;
+	int pincntl73;
+	int pincntl74;
+	int pincntl75;
+	int pincntl76;
+	int pincntl77;
+	int pincntl78;
+	int pincntl79;
+	int pincntl80;
+	int pincntl81;
+	int pincntl82;
+	int pincntl83;
+	int pincntl84;
+	int pincntl85;
+	int pincntl86;
+	int pincntl87;
+	int pincntl88;
+	int pincntl89;
+	int pincntl90;
+	int pincntl91;
+	int pincntl92;
+	int pincntl93;
+	int pincntl94;
+	int pincntl95;
+	int pincntl96;
+	int pincntl97;
+	int pincntl98;
+	int pincntl99;
+	int pincntl100;
+	int pincntl101;
+	int pincntl102;
+	int pincntl103;
+	int pincntl104;
+	int pincntl105;
+	int pincntl106;
+	int pincntl107;
+	int pincntl108;
+	int pincntl109;
+	int pincntl110;
+	int pincntl111;
+	int pincntl112;
+	int pincntl113;
+	int pincntl114;
+	int pincntl115;
+	int pincntl116;
+	int pincntl117;
+	int pincntl118;
+	int pincntl119;
+	int pincntl120;
+	int pincntl121;
+	int pincntl122;
+	int pincntl123;
+	int pincntl124;
+	int pincntl125;
+	int pincntl126;
+	int pincntl127;
+	int pincntl128;
+	int pincntl129;
+	int pincntl130;
+	int pincntl131;
+	int pincntl132;
+	int pincntl133;
+	int pincntl134;
+	int pincntl135;
+	int pincntl136;
+	int pincntl137;
+	int pincntl138;
+	int pincntl139;
+	int pincntl140;
+	int pincntl141;
+	int pincntl142;
+	int pincntl143;
+	int pincntl144;
+	int pincntl145;
+	int pincntl146;
+	int pincntl147;
+	int pincntl148;
+	int pincntl149;
+	int pincntl150;
+	int pincntl151;
+	int pincntl152;
+	int pincntl153;
+	int pincntl154;
+	int pincntl155;
+	int pincntl156;
+	int pincntl157;
+	int pincntl158;
+	int pincntl159;
+	int pincntl160;
+	int pincntl161;
+	int pincntl162;
+	int pincntl163;
+	int pincntl164;
+	int pincntl165;
+	int pincntl166;
+	int pincntl167;
+	int pincntl168;
+	int pincntl169;
+	int pincntl170;
+	int pincntl171;
+	int pincntl172;
+	int pincntl173;
+	int pincntl174;
+	int pincntl175;
+	int pincntl176;
+	int pincntl177;
+	int pincntl178;
+	int pincntl179;
+	int pincntl180;
+	int pincntl181;
+	int pincntl182;
+	int pincntl183;
+	int pincntl184;
+	int pincntl185;
+	int pincntl186;
+	int pincntl187;
+	int pincntl188;
+	int pincntl189;
+	int pincntl190;
+	int pincntl191;
+	int pincntl192;
+	int pincntl193;
+	int pincntl194;
+	int pincntl195;
+	int pincntl196;
+	int pincntl197;
+	int pincntl198;
+	int pincntl199;
+	int pincntl200;
+	int pincntl201;
+	int pincntl202;
+	int pincntl203;
+	int pincntl204;
+	int pincntl205;
+	int pincntl206;
+	int pincntl207;
+	int pincntl208;
+	int pincntl209;
+	int pincntl210;
+	int pincntl211;
+	int pincntl212;
+	int pincntl213;
+	int pincntl214;
+	int pincntl215;
+	int pincntl216;
+	int pincntl217;
+	int pincntl218;
+	int pincntl219;
+	int pincntl220;
+	int pincntl221;
+	int pincntl222;
+	int pincntl223;
+	int pincntl224;
+	int pincntl225;
+	int pincntl226;
+	int pincntl227;
+	int pincntl228;
+	int pincntl229;
+	int pincntl230;
+	int pincntl231;
+	int pincntl232;
+	int pincntl233;
+	int pincntl234;
+	int pincntl235;
+	int pincntl236;
+	int pincntl237;
+	int pincntl238;
+	int pincntl239;
+	int pincntl240;
+	int pincntl241;
+	int pincntl242;
+	int pincntl243;
+	int pincntl244;
+	int pincntl245;
+	int pincntl246;
+	int pincntl247;
+	int pincntl248;
+	int pincntl249;
+	int pincntl250;
+	int pincntl251;
+	int pincntl252;
+	int pincntl253;
+	int pincntl254;
+	int pincntl255;
+	int pincntl256;
+	int pincntl257;
+	int pincntl258;
+	int pincntl259;
+	int pincntl260;
+	int pincntl261;
+	int pincntl262;
+	int pincntl263;
+	int pincntl264;
+	int pincntl265;
+	int pincntl266;
+	int pincntl267;
+	int pincntl268;
+	int pincntl269;
+	int pincntl270;
+};
+
+#endif /* endif _MUX_TI814X_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_ti816x.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_ti816x.h
new file mode 100644
index 000000000..a6a8a988a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/mux_ti816x.h
@@ -0,0 +1,362 @@
+/*
+ * mux_ti816x.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_TI816X_H_
+#define _MUX_TI816X_H_
+
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset)  \
+	__raw_writel(value, (CTRL_BASE + offset));
+
+#define PULLDOWN_EN	(0x0 << 4)	/* Pull Down Selection */
+#define PULLUP_EN	(0x1 << 4)	/* Pull Up Selection */
+#define PULLUDEN	(0x0 << 3)	/* Pull up enabled */
+#define PULLUDDIS	(0x1 << 3)	/* Pull up disabled */
+#define MODE(val)	(val)		/* used for Readability */
+
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+	int pincntl1;
+	int pincntl2;
+	int pincntl3;
+	int pincntl4;
+	int pincntl5;
+	int pincntl6;
+	int pincntl7;
+	int pincntl8;
+	int pincntl9;
+	int pincntl10;
+	int pincntl11;
+	int pincntl12;
+	int pincntl13;
+	int pincntl14;
+	int pincntl15;
+	int pincntl16;
+	int pincntl17;
+	int pincntl18;
+	int pincntl19;
+	int pincntl20;
+	int pincntl21;
+	int pincntl22;
+	int pincntl23;
+	int pincntl24;
+	int pincntl25;
+	int pincntl26;
+	int pincntl27;
+	int pincntl28;
+	int pincntl29;
+	int pincntl30;
+	int pincntl31;
+	int pincntl32;
+	int pincntl33;
+	int pincntl34;
+	int pincntl35;
+	int pincntl36;
+	int pincntl37;
+	int pincntl38;
+	int pincntl39;
+	int pincntl40;
+	int pincntl41;
+	int pincntl42;
+	int pincntl43;
+	int pincntl44;
+	int pincntl45;
+	int pincntl46;
+	int pincntl47;
+	int pincntl48;
+	int pincntl49;
+	int pincntl50;
+	int pincntl51;
+	int pincntl52;
+	int pincntl53;
+	int pincntl54;
+	int pincntl55;
+	int pincntl56;
+	int pincntl57;
+	int pincntl58;
+	int pincntl59;
+	int pincntl60;
+	int pincntl61;
+	int pincntl62;
+	int pincntl63;
+	int pincntl64;
+	int pincntl65;
+	int pincntl66;
+	int pincntl67;
+	int pincntl68;
+	int pincntl69;
+	int pincntl70;
+	int pincntl71;
+	int pincntl72;
+	int pincntl73;
+	int pincntl74;
+	int pincntl75;
+	int pincntl76;
+	int pincntl77;
+	int pincntl78;
+	int pincntl79;
+	int pincntl80;
+	int pincntl81;
+	int pincntl82;
+	int pincntl83;
+	int pincntl84;
+	int pincntl85;
+	int pincntl86;
+	int pincntl87;
+	int pincntl88;
+	int pincntl89;
+	int pincntl90;
+	int pincntl91;
+	int pincntl92;
+	int pincntl93;
+	int pincntl94;
+	int pincntl95;
+	int pincntl96;
+	int pincntl97;
+	int pincntl98;
+	int pincntl99;
+	int pincntl100;
+	int pincntl101;
+	int pincntl102;
+	int pincntl103;
+	int pincntl104;
+	int pincntl105;
+	int pincntl106;
+	int pincntl107;
+	int pincntl108;
+	int pincntl109;
+	int pincntl110;
+	int pincntl111;
+	int pincntl112;
+	int pincntl113;
+	int pincntl114;
+	int pincntl115;
+	int pincntl116;
+	int pincntl117;
+	int pincntl118;
+	int pincntl119;
+	int pincntl120;
+	int pincntl121;
+	int pincntl122;
+	int pincntl123;
+	int pincntl124;
+	int pincntl125;
+	int pincntl126;
+	int pincntl127;
+	int pincntl128;
+	int pincntl129;
+	int pincntl130;
+	int pincntl131;
+	int pincntl132;
+	int pincntl133;
+	int pincntl134;
+	int pincntl135;
+	int pincntl136;
+	int pincntl137;
+	int pincntl138;
+	int pincntl139;
+	int pincntl140;
+	int pincntl141;
+	int pincntl142;
+	int pincntl143;
+	int pincntl144;
+	int pincntl145;
+	int pincntl146;
+	int pincntl147;
+	int pincntl148;
+	int pincntl149;
+	int pincntl150;
+	int pincntl151;
+	int pincntl152;
+	int pincntl153;
+	int pincntl154;
+	int pincntl155;
+	int pincntl156;
+	int pincntl157;
+	int pincntl158;
+	int pincntl159;
+	int pincntl160;
+	int pincntl161;
+	int pincntl162;
+	int pincntl163;
+	int pincntl164;
+	int pincntl165;
+	int pincntl166;
+	int pincntl167;
+	int pincntl168;
+	int pincntl169;
+	int pincntl170;
+	int pincntl171;
+	int pincntl172;
+	int pincntl173;
+	int pincntl174;
+	int pincntl175;
+	int pincntl176;
+	int pincntl177;
+	int pincntl178;
+	int pincntl179;
+	int pincntl180;
+	int pincntl181;
+	int pincntl182;
+	int pincntl183;
+	int pincntl184;
+	int pincntl185;
+	int pincntl186;
+	int pincntl187;
+	int pincntl188;
+	int pincntl189;
+	int pincntl190;
+	int pincntl191;
+	int pincntl192;
+	int pincntl193;
+	int pincntl194;
+	int pincntl195;
+	int pincntl196;
+	int pincntl197;
+	int pincntl198;
+	int pincntl199;
+	int pincntl200;
+	int pincntl201;
+	int pincntl202;
+	int pincntl203;
+	int pincntl204;
+	int pincntl205;
+	int pincntl206;
+	int pincntl207;
+	int pincntl208;
+	int pincntl209;
+	int pincntl210;
+	int pincntl211;
+	int pincntl212;
+	int pincntl213;
+	int pincntl214;
+	int pincntl215;
+	int pincntl216;
+	int pincntl217;
+	int pincntl218;
+	int pincntl219;
+	int pincntl220;
+	int pincntl221;
+	int pincntl222;
+	int pincntl223;
+	int pincntl224;
+	int pincntl225;
+	int pincntl226;
+	int pincntl227;
+	int pincntl228;
+	int pincntl229;
+	int pincntl230;
+	int pincntl231;
+	int pincntl232;
+	int pincntl233;
+	int pincntl234;
+	int pincntl235;
+	int pincntl236;
+	int pincntl237;
+	int pincntl238;
+	int pincntl239;
+	int pincntl240;
+	int pincntl241;
+	int pincntl242;
+	int pincntl243;
+	int pincntl244;
+	int pincntl245;
+	int pincntl246;
+	int pincntl247;
+	int pincntl248;
+	int pincntl249;
+	int pincntl250;
+	int pincntl251;
+	int pincntl252;
+	int pincntl253;
+	int pincntl254;
+	int pincntl255;
+	int pincntl256;
+	int pincntl257;
+	int pincntl258;
+	int pincntl259;
+	int pincntl260;
+	int pincntl261;
+	int pincntl262;
+	int pincntl263;
+	int pincntl264;
+	int pincntl265;
+	int pincntl266;
+	int pincntl267;
+	int pincntl268;
+	int pincntl269;
+	int pincntl270;
+	int pincntl271;
+	int pincntl272;
+	int pincntl273;
+	int pincntl274;
+	int pincntl275;
+	int pincntl276;
+	int pincntl277;
+	int pincntl278;
+	int pincntl279;
+	int pincntl280;
+	int pincntl281;
+	int pincntl282;
+	int pincntl283;
+	int pincntl284;
+	int pincntl285;
+	int pincntl286;
+	int pincntl287;
+	int pincntl288;
+	int pincntl289;
+	int pincntl290;
+	int pincntl291;
+	int pincntl292;
+	int pincntl293;
+	int pincntl294;
+	int pincntl295;
+	int pincntl296;
+	int pincntl297;
+	int pincntl298;
+	int pincntl299;
+	int pincntl300;
+	int pincntl301;
+	int pincntl302;
+	int pincntl303;
+	int pincntl304;
+	int pincntl305;
+	int pincntl306;
+	int pincntl307;
+	int pincntl308;
+	int pincntl309;
+	int pincntl310;
+	int pincntl311;
+	int pincntl312;
+	int pincntl313;
+	int pincntl314;
+	int pincntl315;
+	int pincntl316;
+	int pincntl317;
+	int pincntl318;
+	int pincntl319;
+	int pincntl320;
+	int pincntl321;
+	int pincntl322;
+	int pincntl323;
+};
+
+#endif /* endif _MUX_TI816X_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/omap.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/omap.h
new file mode 100644
index 000000000..bc9f0a114
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/omap.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * omap.h
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Chandan Nath <chandan.nath@ti.com>
+ *
+ * Derived from OMAP4 work by
+ *	Aneesh V <aneesh@ti.com>
+ */
+
+#ifndef _OMAP_H_
+#define _OMAP_H_
+
+#include <linux/sizes.h>
+
+#ifdef CONFIG_AM33XX
+#define NON_SECURE_SRAM_START	0x402F0400
+#define NON_SECURE_SRAM_END	0x40310000
+#define NON_SECURE_SRAM_IMG_END	0x4030B800
+#elif defined(CONFIG_TI816X) || defined(CONFIG_TI814X)
+#define NON_SECURE_SRAM_START	0x40300000
+#define NON_SECURE_SRAM_END	0x40320000
+#define NON_SECURE_SRAM_IMG_END	0x4031B800
+#elif defined(CONFIG_AM43XX)
+#define NON_SECURE_SRAM_START	0x402F0400
+#define NON_SECURE_SRAM_END	0x40340000
+#define NON_SECURE_SRAM_IMG_END	0x40337DE0
+#define QSPI_BASE              0x47900000
+#endif
+#define SRAM_SCRATCH_SPACE_ADDR	(NON_SECURE_SRAM_IMG_END - SZ_1K)
+
+/* Boot parameters */
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+	unsigned int reserved;
+	unsigned int boot_device_descriptor;
+	unsigned char boot_device;
+	unsigned char reset_reason;
+};
+
+#define DEVICE_TYPE_SHIFT		0x8
+#define DEVICE_TYPE_MASK		(0x7 << DEVICE_TYPE_SHIFT)
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/spl.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/spl.h
new file mode 100644
index 000000000..f3910c212
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/spl.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_NONE	0x00
+#define BOOT_DEVICE_MMC2_2	0xFF
+
+#if defined(CONFIG_TI814X)
+#define BOOT_DEVICE_XIP		0x01
+#define BOOT_DEVICE_XIPWAIT	0x02
+#define BOOT_DEVICE_NAND	0x05
+#define BOOT_DEVICE_NAND_I2C	0x06
+#define BOOT_DEVICE_MMC2	0x08 /* ROM only supports 2nd instance. */
+#define BOOT_DEVICE_MMC1	0x09
+#define BOOT_DEVICE_SPI		0x15
+#define BOOT_DEVICE_UART	0x41
+#define BOOT_DEVICE_USBETH	0x44
+#define BOOT_DEVICE_CPGMAC	0x46
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
+#elif defined(CONFIG_TI816X)
+#define BOOT_DEVICE_XIP		0x01
+#define BOOT_DEVICE_XIPWAIT	0x02
+#define BOOT_DEVICE_NAND	0x03
+#define BOOT_DEVICE_ONENAND	0x04
+#define BOOT_DEVICE_MMC2	0x05 /* ROM only supports 2nd instance. */
+#define BOOT_DEVICE_MMC1	0x06
+#define BOOT_DEVICE_UART	0x43
+#define BOOT_DEVICE_USB		0x45
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
+#elif defined(CONFIG_AM33XX)
+#define BOOT_DEVICE_XIP		0x01
+#define BOOT_DEVICE_XIPWAIT	0x02
+#define BOOT_DEVICE_NAND	0x05
+#define BOOT_DEVICE_NAND_I2C	0x06
+#define BOOT_DEVICE_MMC1	0x08
+#define BOOT_DEVICE_MMC2	0x09
+#define BOOT_DEVICE_SPI		0x0B
+#define BOOT_DEVICE_UART	0x41
+#define BOOT_DEVICE_USBETH	0x44
+#define BOOT_DEVICE_CPGMAC	0x46
+#define BOOT_DEVICE_ONENAND	0xFF /* ROM does not support OneNAND. */
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
+#elif defined(CONFIG_AM43XX)
+#define BOOT_DEVICE_NOR		0x01
+#define BOOT_DEVICE_NAND	0x05
+#define BOOT_DEVICE_MMC1	0x07
+#define BOOT_DEVICE_MMC2	0x08
+#define BOOT_DEVICE_SPI		0x0A
+#define BOOT_DEVICE_USB		0x0D
+#define BOOT_DEVICE_UART	0x41
+#define BOOT_DEVICE_USBETH	0x45
+#define BOOT_DEVICE_CPGMAC	0x47
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
+#ifdef CONFIG_SPL_USB_STORAGE
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_USB
+#else
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
+#endif
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-am33xx/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-am33xx/sys_proto.h
new file mode 100644
index 000000000..be17aad29
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * sys_proto.h
+ *
+ * System information header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+#include <linux/mtd/omap_gpmc.h>
+#include <asm/arch/cpu.h>
+
+u32 get_cpu_rev(void);
+u32 get_sysboot_value(void);
+
+extern struct ctrl_stat *cstat;
+u32 get_device_type(void);
+void save_omap_boot_params(void);
+void setup_early_clocks(void);
+void setup_clocks_for_console(void);
+void mpu_pll_config_val(int mpull_m);
+void ddr_pll_config(unsigned int ddrpll_M);
+
+void sdelay(unsigned long);
+
+void gpmc_init(void);
+void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs, u32 base,
+			u32 size);
+int omap_nand_switch_ecc(uint32_t, uint32_t);
+
+void set_uart_mux_conf(void);
+void set_mux_conf_regs(void);
+void sdram_init(void);
+u32 wait_on_value(u32, u32, void *, u32);
+#ifdef CONFIG_NOR_BOOT
+void enable_norboot_pin_mux(void);
+#endif
+void am33xx_spl_board_init(void);
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev);
+int am335x_get_mpu_vdd(int sil_rev, int frequency);
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
+#endif
+
+void enable_usb_clocks(int index);
+void disable_usb_clocks(int index);
+void do_board_detect(void);
+u32 get_sys_clk_index(void);
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/armada100.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/armada100.h
new file mode 100644
index 000000000..dd21ad3c6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/armada100.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ */
+
+#ifndef _ASM_ARCH_ARMADA100_H
+#define _ASM_ARCH_ARMADA100_H
+
+#if defined (CONFIG_ARMADA100)
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK     (1<<0)  /* APB Bus Clock Enable */
+#define APBC_FNCLK      (1<<1)  /* Functional Clock Enable */
+#define APBC_RST        (1<<2)  /* Reset Generation */
+/* Functional Clock Selection Mask */
+#define APBC_FNCLKSEL(x)        (((x) & 0xf) << 4)
+
+/* Fast Ethernet Controller Clock register definition */
+#define FE_CLK_RST		0x1
+#define FE_CLK_ENA		0x8
+
+/* SSP2 Clock Control */
+#define SSP2_APBCLK		0x01
+#define SSP2_FNCLK		0x02
+
+/* USB Clock/reset control bits */
+#define USB_SPH_AXICLK_EN	0x10
+#define USB_SPH_AXI_RST		0x02
+
+/* MPMU Clocks */
+#define APB2_26M_EN		(1 << 20)
+#define AP_26M			(1 << 4)
+
+/* Register Base Addresses */
+#define ARMD1_DRAM_BASE		0xB0000000
+#define ARMD1_FEC_BASE		0xC0800000
+#define ARMD1_TIMER_BASE	0xD4014000
+#define ARMD1_APBC1_BASE	0xD4015000
+#define ARMD1_APBC2_BASE	0xD4015800
+#define ARMD1_UART1_BASE	0xD4017000
+#define ARMD1_UART2_BASE	0xD4018000
+#define ARMD1_GPIO_BASE		0xD4019000
+#define ARMD1_SSP1_BASE		0xD401B000
+#define ARMD1_SSP2_BASE		0xD401C000
+#define ARMD1_MFPR_BASE		0xD401E000
+#define ARMD1_SSP3_BASE		0xD401F000
+#define ARMD1_SSP4_BASE		0xD4020000
+#define ARMD1_SSP5_BASE		0xD4021000
+#define ARMD1_UART3_BASE	0xD4026000
+#define ARMD1_MPMU_BASE		0xD4050000
+#define ARMD1_USB_HOST_BASE	0xD4209000
+#define ARMD1_APMU_BASE		0xD4282800
+#define ARMD1_CPU_BASE		0xD4282C00
+
+#endif /* CONFIG_ARMADA100 */
+#endif /* _ASM_ARCH_ARMADA100_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/config.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/config.h
new file mode 100644
index 000000000..2862dd072
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/config.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Lei Wen <leiwen@marvell.com>
+ */
+
+/*
+ * This file should be included in board config header file.
+ *
+ * It supports common definitions for Armada100 platform
+ */
+
+#ifndef _ARMD1_CONFIG_H
+#define _ARMD1_CONFIG_H
+
+#include <asm/arch/armada100.h>
+
+#define CONFIG_SYS_TCLK		(14745600)	/* NS16550 clk config */
+#define CONFIG_SYS_HZ_CLOCK	(3250000)	/* Timer Freq. 3.25MHZ */
+#define CONFIG_MARVELL_MFP			/* Enable mvmfp driver */
+#define MV_MFPR_BASE		ARMD1_MFPR_BASE
+#define MV_UART_CONSOLE_BASE	ARMD1_UART1_BASE
+#define CONFIG_SYS_NS16550_IER	(1 << 6)	/* Bit 6 in UART_IER register
+						represents UART Unit Enable */
+
+#endif /* _ARMD1_CONFIG_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/cpu.h
new file mode 100644
index 000000000..cd5e5051d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/cpu.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>, Contributor: Mahavir Jain <mjain@marvell.com>
+ */
+
+#ifndef _ARMADA100CPU_H
+#define _ARMADA100CPU_H
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+/*
+ * Main Power Management (MPMU) Registers
+ * Refer Datasheet Appendix A.8
+ */
+struct armd1mpmu_registers {
+	u8 pad0[0x08 - 0x00];
+	u32 fccr;	/*0x0008*/
+	u32 pocr;	/*0x000c*/
+	u32 posr;	/*0x0010*/
+	u32 succr;	/*0x0014*/
+	u8 pad1[0x030 - 0x014 - 4];
+	u32 gpcr;	/*0x0030*/
+	u8 pad2[0x200 - 0x030 - 4];
+	u32 wdtpcr;	/*0x0200*/
+	u8 pad3[0x1000 - 0x200 - 4];
+	u32 apcr;	/*0x1000*/
+	u32 apsr;	/*0x1004*/
+	u8 pad4[0x1020 - 0x1004 - 4];
+	u32 aprr;	/*0x1020*/
+	u32 acgr;	/*0x1024*/
+	u32 arsr;	/*0x1028*/
+};
+
+/*
+ * Application Subsystem Power Management
+ * Refer Datasheet Appendix A.9
+ */
+struct armd1apmu_registers {
+	u32 pcr;		/* 0x000 */
+	u32 ccr;		/* 0x004 */
+	u32 pad1;
+	u32 ccsr;		/* 0x00C */
+	u32 fc_timer;		/* 0x010 */
+	u32 pad2;
+	u32 ideal_cfg;		/* 0x018 */
+	u8 pad3[0x04C - 0x018 - 4];
+	u32 lcdcrc;		/* 0x04C */
+	u32 cciccrc;		/* 0x050 */
+	u32 sd1crc;		/* 0x054 */
+	u32 sd2crc;		/* 0x058 */
+	u32 usbcrc;		/* 0x05C */
+	u32 nfccrc;		/* 0x060 */
+	u32 dmacrc;		/* 0x064 */
+	u32 pad4;
+	u32 buscrc;		/* 0x06C */
+	u8 pad5[0x07C - 0x06C - 4];
+	u32 wake_clr;		/* 0x07C */
+	u8 pad6[0x090 - 0x07C - 4];
+	u32 core_status;	/* 0x090 */
+	u32 rfsc;		/* 0x094 */
+	u32 imr;		/* 0x098 */
+	u32 irwc;		/* 0x09C */
+	u32 isr;		/* 0x0A0 */
+	u8 pad7[0x0B0 - 0x0A0 - 4];
+	u32 mhst;		/* 0x0B0 */
+	u32 msr;		/* 0x0B4 */
+	u8 pad8[0x0C0 - 0x0B4 - 4];
+	u32 msst;		/* 0x0C0 */
+	u32 pllss;		/* 0x0C4 */
+	u32 smb;		/* 0x0C8 */
+	u32 gccrc;		/* 0x0CC */
+	u8 pad9[0x0D4 - 0x0CC - 4];
+	u32 smccrc;		/* 0x0D4 */
+	u32 pad10;
+	u32 xdcrc;		/* 0x0DC */
+	u32 sd3crc;		/* 0x0E0 */
+	u32 sd4crc;		/* 0x0E4 */
+	u8 pad11[0x0F0 - 0x0E4 - 4];
+	u32 cfcrc;		/* 0x0F0 */
+	u32 mspcrc;		/* 0x0F4 */
+	u32 cmucrc;		/* 0x0F8 */
+	u32 fecrc;		/* 0x0FC */
+	u32 pciecrc;		/* 0x100 */
+	u32 epdcrc;		/* 0x104 */
+};
+
+/*
+ * APB1 Clock Reset/Control Registers
+ * Refer Datasheet Appendix A.10
+ */
+struct armd1apb1_registers {
+	u32 uart1;	/*0x000*/
+	u32 uart2;	/*0x004*/
+	u32 gpio;	/*0x008*/
+	u32 pwm1;	/*0x00c*/
+	u32 pwm2;	/*0x010*/
+	u32 pwm3;	/*0x014*/
+	u32 pwm4;	/*0x018*/
+	u8 pad0[0x028 - 0x018 - 4];
+	u32 rtc;	/*0x028*/
+	u32 twsi0;	/*0x02c*/
+	u32 kpc;	/*0x030*/
+	u32 timers;	/*0x034*/
+	u8 pad1[0x03c - 0x034 - 4];
+	u32 aib;	/*0x03c*/
+	u32 sw_jtag;	/*0x040*/
+	u32 timer1;	/*0x044*/
+	u32 onewire;	/*0x048*/
+	u8 pad2[0x050 - 0x048 - 4];
+	u32 asfar;	/*0x050 AIB Secure First Access Reg*/
+	u32 assar;	/*0x054 AIB Secure Second Access Reg*/
+	u8 pad3[0x06c - 0x054 - 4];
+	u32 twsi1;	/*0x06c*/
+	u32 uart3;	/*0x070*/
+	u8 pad4[0x07c - 0x070 - 4];
+	u32 timer2;	/*0x07C*/
+	u8 pad5[0x084 - 0x07c - 4];
+	u32 ac97;	/*0x084*/
+};
+
+/*
+* APB2 Clock Reset/Control Registers
+* Refer Datasheet Appendix A.11
+*/
+struct armd1apb2_registers {
+	u32 pad1[0x01C - 0x000];
+	u32 ssp1_clkrst;		/* 0x01C */
+	u32 ssp2_clkrst;		/* 0x020 */
+	u32 pad2[0x04C - 0x020 - 4];
+	u32 ssp3_clkrst;		/* 0x04C */
+	u32 pad3[0x058 - 0x04C - 4];
+	u32 ssp4_clkrst;		/* 0x058 */
+	u32 ssp5_clkrst;		/* 0x05C */
+};
+
+/*
+ * CPU Interface Registers
+ * Refer Datasheet Appendix A.2
+ */
+struct armd1cpu_registers {
+	u32 chip_id;		/* Chip Id Reg */
+	u32 pad;
+	u32 cpu_conf;		/* CPU Conf Reg */
+	u32 pad1;
+	u32 cpu_sram_spd;	/* CPU SRAM Speed Reg */
+	u32 pad2;
+	u32 cpu_l2c_spd;	/* CPU L2cache Speed Conf */
+	u32 mcb_conf;		/* MCB Conf Reg */
+	u32 sys_boot_ctl;	/* Sytem Boot Control */
+};
+
+/*
+ * Functions
+ */
+u32 armd1_sdram_base(int);
+u32 armd1_sdram_size(int);
+
+#endif /* _ARMADA100CPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/gpio.h
new file mode 100644
index 000000000..b85f6a53d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/gpio.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ */
+
+#ifndef _ASM_ARCH_GPIO_H
+#define _ASM_ARCH_GPIO_H
+
+#include <asm/types.h>
+#include <asm/arch/armada100.h>
+
+#define GPIO_HIGH		1
+#define GPIO_LOW		0
+
+#define GPIO_TO_REG(gp)		(gp >> 5)
+#define GPIO_TO_BIT(gp)		(1 << (gp & 0x1F))
+#define GPIO_VAL(gp, val)	((val >> (gp & 0x1F)) & 0x01)
+
+static inline void *get_gpio_base(int bank)
+{
+	const unsigned int offset[4] = {0, 4, 8, 0x100};
+	/* gpio register bank offset - refer Appendix A.36 */
+	return (struct gpio_reg *)(ARMD1_GPIO_BASE + offset[bank]);
+}
+
+#endif /* _ASM_ARCH_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/mfp.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/mfp.h
new file mode 100644
index 000000000..a808ee857
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/mfp.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Based on linux/arch/arm/mach-mpp/include/mfp-pxa168.h
+ * (C) Copyright 2007
+ * Marvell Semiconductor <www.marvell.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ */
+
+#ifndef __ARMADA100_MFP_H
+#define __ARMADA100_MFP_H
+
+/*
+ * Frequently used MFP Configuration macros for all ARMADA100 family of SoCs
+ *
+ * 				    offset, pull,pF, drv,dF, edge,eF ,afn,aF
+ */
+/* UART1 */
+#define MFP107_UART1_TXD	(MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST)
+#define MFP107_UART1_RXD	(MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST)
+#define MFP108_UART1_RXD	(MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST)
+#define MFP108_UART1_TXD	(MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST)
+#define MFP109_UART1_CTS	(MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
+#define MFP109_UART1_RTS	(MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFP110_UART1_RTS	(MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM)
+#define MFP110_UART1_CTS	(MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFP111_UART1_RI		(MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM)
+#define MFP111_UART1_DSR	(MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFP112_UART1_DTR	(MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM)
+#define MFP112_UART1_DCD	(MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+
+/* UART2 */
+#define MFP47_UART2_RXD		(MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM)
+#define MFP48_UART2_TXD		(MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM)
+#define MFP88_UART2_RXD		(MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFP89_UART2_TXD		(MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+
+/* UART3 */
+#define MFPO8_UART3_TXD		(MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFPO9_UART3_RXD		(MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+
+/* I2c */
+#define MFP105_CI2C_SDA		(MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
+#define MFP106_CI2C_SCL		(MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM)
+
+/* Fast Ethernet */
+#define MFP086_ETH_TXCLK	(MFP_REG(0x158) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP087_ETH_TXEN		(MFP_REG(0x15C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP088_ETH_TXDQ3	(MFP_REG(0x160) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP089_ETH_TXDQ2	(MFP_REG(0x164) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP090_ETH_TXDQ1	(MFP_REG(0x168) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP091_ETH_TXDQ0	(MFP_REG(0x16C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP092_ETH_CRS		(MFP_REG(0x170) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP093_ETH_COL		(MFP_REG(0x174) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP094_ETH_RXCLK	(MFP_REG(0x178) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP095_ETH_RXER		(MFP_REG(0x17C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP096_ETH_RXDQ3	(MFP_REG(0x180) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP097_ETH_RXDQ2	(MFP_REG(0x184) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP098_ETH_RXDQ1	(MFP_REG(0x188) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP099_ETH_RXDQ0	(MFP_REG(0x18C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP100_ETH_MDC		(MFP_REG(0x190) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP101_ETH_MDIO		(MFP_REG(0x194) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP103_ETH_RXDV		(MFP_REG(0x19C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+
+/* SPI */
+#define MFP107_SSP2_RXD		(MFP_REG(0x1AC) | MFP_AF4 | MFP_DRIVE_MEDIUM)
+#define MFP108_SSP2_TXD		(MFP_REG(0x1B0) | MFP_AF4 | MFP_DRIVE_MEDIUM)
+#define MFP110_SSP2_CS		(MFP_REG(0x1B8) | MFP_AF0 | MFP_DRIVE_MEDIUM)
+#define MFP111_SSP2_CLK		(MFP_REG(0x1BC) | MFP_AF4 | MFP_DRIVE_MEDIUM)
+
+/* More macros can be defined here... */
+
+#define MFP_PIN_MAX	117
+
+#endif /* __ARMADA100_MFP_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/spi.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/spi.h
new file mode 100644
index 000000000..873ba6e91
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/spi.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ */
+
+#ifndef __ARMADA100_SPI_H_
+#define __ARMADA100_SPI_H_
+
+#include <asm/arch/armada100.h>
+
+#define CAT_BASE_ADDR(x)	ARMD1_SSP ## x ## _BASE
+#define SSP_REG_BASE(x)		CAT_BASE_ADDR(x)
+
+/*
+ * SSP Serial Port Registers
+ * refer Appendix A.26
+ */
+struct ssp_reg {
+	u32 sscr0;	/* SSP Control Register 0 - 0x000 */
+	u32 sscr1;	/* SSP Control Register 1 - 0x004 */
+	u32 sssr;	/* SSP Status Register - 0x008 */
+	u32 ssitr;	/* SSP Interrupt Test Register - 0x00C */
+	u32 ssdr;	/* SSP Data Register - 0x010 */
+	u32 pad1[5];
+	u32 ssto;	/* SSP Timeout Register - 0x028 */
+	u32 sspsp;	/* SSP Programmable Serial Protocol Register - 0x02C */
+	u32 sstsa;	/* SSP TX Timeslot Active Register - 0x030 */
+	u32 ssrsa;	/* SSP RX Timeslot Active Register - 0x034 */
+	u32 sstss;	/* SSP Timeslot Status Register - 0x038 */
+};
+
+#define DEFAULT_WORD_LEN	8
+#define SSP_FLUSH_NUM		0x2000
+#define RX_THRESH_DEF		8
+#define TX_THRESH_DEF		8
+#define TIMEOUT_DEF		1000
+
+#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
+#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity
+					   setting */
+#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
+#define SSCR1_TFT	0x03c0		/* Transmit FIFO Threshold (mask) */
+#define SSCR1_RFT	0x3c00		/* Receive FIFO Threshold (mask) */
+
+#define SSCR1_TXTRESH(x)	((x - 1) << 6)	/* level [1..16] */
+#define SSCR1_RXTRESH(x)	((x - 1) << 10)	/* level [1..16] */
+#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out
+						   Interrupt enable */
+
+#define SSCR0_DSS		0x0f		/* Data Size Select (mask) */
+#define SSCR0_DATASIZE(x)	(x - 1)		/* Data Size Select [4..16] */
+#define SSCR0_FRF		0x30		/* FRame Format (mask) */
+#define SSCR0_MOTO		(0x0 << 4)	/* Motorola's Serial
+						   Peripheral Interface */
+#define SSCR0_TI		(0x1 << 4)	/* TI's Synchronous
+						   Serial Protocol (SSP) */
+#define SSCR0_NATIONAL		(0x2 << 4)	/* National Microwire */
+#define SSCR0_ECS		(1 << 6)	/* External clock select */
+#define SSCR0_SSE		(1 << 7)	/* Synchronous Serial Port
+						   Enable */
+
+#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
+#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
+#define SSSR_BSY	(1 << 4)	/* SSP Busy */
+#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
+#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
+#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+#define SSSR_TINT	(1 << 19)	/* Receiver Time-out Interrupt */
+
+#endif /* __ARMADA100_SPI_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/utmi-armada100.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/utmi-armada100.h
new file mode 100644
index 000000000..28147f42a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/utmi-armada100.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
+ *
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ */
+
+#ifndef __UTMI_ARMADA100__
+#define __UTMI_ARMADA100__
+
+#define UTMI_PHY_BASE		0xD4206000
+
+/* utmi_ctrl - bits */
+#define INPKT_DELAY_SOF		(1 << 28)
+#define PLL_PWR_UP		2
+#define PHY_PWR_UP		1
+
+/* utmi_pll - bits */
+#define PLL_FBDIV_MASK		0x00000FF0
+#define PLL_FBDIV		4
+#define PLL_REFDIV_MASK		0x0000000F
+#define PLL_REFDIV		0
+#define PLL_READY		0x800000
+#define VCOCAL_START		(1 << 21)
+
+#define N_DIVIDER		0xEE
+#define M_DIVIDER		0x0B
+
+/* utmi_tx - bits */
+#define CK60_PHSEL		17
+#define PHSEL_VAL		0x4
+#define RCAL_START		(1 << 12)
+
+/*
+ * USB PHY registers
+ * Refer Datasheet Appendix A.21
+ */
+struct armd1usb_phy_reg {
+	u32 utmi_rev;	/* USB PHY Revision */
+	u32 utmi_ctrl;	/* USB PHY Control register */
+	u32 utmi_pll;	/* PLL register */
+	u32 utmi_tx;	/* Tx register */
+	u32 utmi_rx;	/* Rx register */
+	u32 utmi_ivref;	/* IVREF register */
+	u32 utmi_tst_g0;	/* Test group 0 register */
+	u32 utmi_tst_g1;	/* Test group 1 register */
+	u32 utmi_tst_g2;	/* Test group 2 register */
+	u32 utmi_tst_g3;	/* Test group 3 register */
+	u32 utmi_tst_g4;	/* Test group 4 register */
+	u32 utmi_tst_g5;	/* Test group 5 register */
+	u32 utmi_reserve;	/* Reserve Register */
+	u32 utmi_usb_int;	/* USB interuppt register */
+	u32 utmi_dbg_ctl;	/* Debug control register */
+	u32 utmi_otg_addon;	/* OTG addon register */
+};
+
+int utmi_init(void);
+
+#endif /* __UTMI_ARMADA100__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada8k/cache_llc.h b/roms/u-boot/arch/arm/include/asm/arch-armada8k/cache_llc.h
new file mode 100644
index 000000000..8cb114496
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada8k/cache_llc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ * https://spdx.org/licenses
+ */
+
+#ifndef _CACHE_LLC_H_
+#define _CACHE_LLC_H_
+
+/* Armada-7K/8K last level cache */
+
+#define MVEBU_A8K_REGS_BASE_MSB		0xf000
+#define LLC_BASE_ADDR			0x8000
+#define LLC_CACHE_SYNC			0x700
+#define LLC_CACHE_SYNC_COMPLETE		0x730
+#define LLC_FLUSH_BY_WAY		0x7fc
+#define LLC_WAY_MASK			0xffffffff
+#define LLC_CACHE_SYNC_MASK		0x1
+
+#endif	/* _CACHE_LLC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada8k/soc-info.h b/roms/u-boot/arch/arm/include/asm/arch-armada8k/soc-info.h
new file mode 100644
index 000000000..64606efff
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armada8k/soc-info.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ * https://spdx.org/licenses
+ */
+
+#ifndef _SOC_INFO_H_
+#define _SOC_INFO_H_
+
+/* Pin Ctrl driver definitions */
+#define BITS_PER_PIN		4
+#define PIN_FUNC_MASK		((1 << BITS_PER_PIN) - 1)
+#define PIN_REG_SHIFT		3
+#define PIN_FIELD_MASK		((1 << PIN_REG_SHIFT) - 1)
+
+#endif	/* _SOC_INFO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armv7/generictimer.h b/roms/u-boot/arch/arm/include/asm/arch-armv7/generictimer.h
new file mode 100644
index 000000000..f40268609
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armv7/generictimer.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Based on code by Carl van Schaik <carl@ok-labs.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _GENERICTIMER_H_
+#define _GENERICTIMER_H_
+
+#ifdef __ASSEMBLY__
+
+/*
+ * This macro provide a physical timer that can be used for delay in the code.
+ * The macro is moved from sunxi/psci_sun7i.S
+ *
+ * reg: is used in this macro.
+ * ticks: The freq is based on generic timer.
+ */
+.macro	timer_wait	reg, ticks
+	movw	\reg, #(\ticks & 0xffff)
+	movt	\reg, #(\ticks >> 16)
+	mcr	p15, 0, \reg, c14, c2, 0
+	isb
+	mov	\reg, #3
+	mcr	p15, 0, \reg, c14, c2, 1
+1 :	isb
+	mrc	p15, 0, \reg, c14, c2, 1
+	ands	\reg, \reg, #4
+	bne	1b
+	mov	\reg, #0
+	mcr	p15, 0, \reg, c14, c2, 1
+	isb
+.endm
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _GENERICTIMER_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armv7/globaltimer.h b/roms/u-boot/arch/arm/include/asm/arch-armv7/globaltimer.h
new file mode 100644
index 000000000..2d9cf7798
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armv7/globaltimer.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ */
+#ifndef _GLOBALTIMER_H_
+#define _GLOBALTIMER_H_
+
+struct globaltimer {
+	u32 cnt_l; /* 0x00 */
+	u32 cnt_h;
+	u32 ctl;
+	u32 stat;
+	u32 cmp_l; /* 0x10 */
+	u32 cmp_h;
+	u32 inc;
+};
+
+#endif /* _GLOBALTIMER_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armv7/sysctrl.h b/roms/u-boot/arch/arm/include/asm/arch-armv7/sysctrl.h
new file mode 100644
index 000000000..fc72fac8d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armv7/sysctrl.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ */
+#ifndef _SYSCTRL_H_
+#define _SYSCTRL_H_
+
+/* System controller (SP810) register definitions */
+#define SP810_TIMER0_ENSEL	(1 << 15)
+#define SP810_TIMER1_ENSEL	(1 << 17)
+#define SP810_TIMER2_ENSEL	(1 << 19)
+#define SP810_TIMER3_ENSEL	(1 << 21)
+
+struct sysctrl {
+	u32 scctrl;		/* 0x000 */
+	u32 scsysstat;
+	u32 scimctrl;
+	u32 scimstat;
+	u32 scxtalctrl;
+	u32 scpllctrl;
+	u32 scpllfctrl;
+	u32 scperctrl0;
+	u32 scperctrl1;
+	u32 scperen;
+	u32 scperdis;
+	u32 scperclken;
+	u32 scperstat;
+	u32 res1[0x006];
+	u32 scflashctrl;	/* 0x04c */
+	u32 res2[0x3a4];
+	u32 scsysid0;		/* 0xee0 */
+	u32 scsysid1;
+	u32 scsysid2;
+	u32 scsysid3;
+	u32 scitcr;
+	u32 scitir0;
+	u32 scitir1;
+	u32 scitor;
+	u32 sccntctrl;
+	u32 sccntdata;
+	u32 sccntstep;
+	u32 res3[0x32];
+	u32 scperiphid0;	/* 0xfe0 */
+	u32 scperiphid1;
+	u32 scperiphid2;
+	u32 scperiphid3;
+	u32 scpcellid0;
+	u32 scpcellid1;
+	u32 scpcellid2;
+	u32 scpcellid3;
+};
+#endif /* _SYSCTRL_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armv7/systimer.h b/roms/u-boot/arch/arm/include/asm/arch-armv7/systimer.h
new file mode 100644
index 000000000..04c413045
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armv7/systimer.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ */
+#ifndef _SYSTIMER_H_
+#define _SYSTIMER_H_
+
+/* AMBA timer register base address */
+#define SYSTIMER_BASE		0x10011000
+
+#define SYSHZ_CLOCK		1000000		/* Timers -> 1Mhz */
+#define SYSTIMER_RELOAD		0xFFFFFFFF
+#define SYSTIMER_EN		(1 << 7)
+#define SYSTIMER_32BIT		(1 << 1)
+#define SYSTIMER_PRESC_16	(1 << 2)
+#define SYSTIMER_PRESC_256	(1 << 3)
+
+struct systimer {
+	u32 timer0load;		/* 0x00 */
+	u32 timer0value;
+	u32 timer0control;
+	u32 timer0intclr;
+	u32 timer0ris;
+	u32 timer0mis;
+	u32 timer0bgload;
+	u32 timer1load;		/* 0x20 */
+	u32 timer1value;
+	u32 timer1control;
+	u32 timer1intclr;
+	u32 timer1ris;
+	u32 timer1mis;
+	u32 timer1bgload;
+};
+#endif /* _SYSTIMER_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armv7/wdt.h b/roms/u-boot/arch/arm/include/asm/arch-armv7/wdt.h
new file mode 100644
index 000000000..e3fa16ffa
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-armv7/wdt.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Matt Waddel, <matt.waddel@linaro.org>
+ */
+#ifndef _WDT_H_
+#define _WDT_H_
+
+/* Watchdog timer (SP805) register base address */
+#define WDT_BASE	0x100E5000
+
+#define WDT_EN		0x2
+#define WDT_RESET_LOAD	0x0
+
+struct wdt {
+	u32 wdogload;		/* 0x000 */
+	u32 wdogvalue;
+	u32 wdogcontrol;
+	u32 wdogintclr;
+	u32 wdogris;
+	u32 wdogmis;
+	u32 res1[0x2F9];
+	u32 wdoglock;		/* 0xC00 */
+	u32 res2[0xBE];
+	u32 wdogitcr;		/* 0xF00 */
+	u32 wdogitop;
+	u32 res3[0x35];
+	u32 wdogperiphid0;	/* 0xFE0 */
+	u32 wdogperiphid1;
+	u32 wdogperiphid2;
+	u32 wdogperiphid3;
+	u32 wdogpcellid0;
+	u32 wdogpcellid1;
+	u32 wdogpcellid2;
+	u32 wdogpcellid3;
+};
+
+#endif /* _WDT_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/boot0.h
new file mode 100644
index 000000000..368becc87
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/boot0.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+
+#ifndef _ASM_ARCH_BOOT0_H
+#define _ASM_ARCH_BOOT0_H
+
+_start:
+	ARM_VECTORS
+
+	.word	0x0	/* key location */
+	.word	0x0	/* start address of image */
+	.word	0xfc00  /* maximum image size: 63KB */
+	.word	0x0	/* signature address */
+	.word	0x0	/* header revision ID low */
+	.word	0x0	/* header revision ID high */
+	.word	0x0	/* reserved */
+	.word	0x0	/* checksum */
+	.word	0x0	/* BL2 secure header */
+	.word	0x0	/* public key or digest offset for BL2 */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/pinctrl.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/pinctrl.h
new file mode 100644
index 000000000..dd85464dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/pinctrl.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2017 Google, Inc
+ */
+#ifndef _ASM_ARCH_PERIPH_H
+#define _ASM_ARCH_PERIPH_H
+
+/*
+ * Peripherals supported by the hardware.
+ * These are used to specify pinctrl settings.
+ */
+
+enum periph_id {
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+	PERIPH_ID_UART3,
+	PERIPH_ID_UART4,
+	PERIPH_ID_LPC,
+	PERIPH_ID_PWM0,
+	PERIPH_ID_PWM1,
+	PERIPH_ID_PWM2,
+	PERIPH_ID_PWM3,
+	PERIPH_ID_PWM4,
+	PERIPH_ID_PWM5,
+	PERIPH_ID_PWM6,
+	PERIPH_ID_PWM7,
+	PERIPH_ID_PWM8,
+	PERIPH_ID_MAC1,
+	PERIPH_ID_MAC2,
+	PERIPH_ID_VIDEO,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SPI2,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_I2C4,
+	PERIPH_ID_I2C5,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_I2C7,
+	PERIPH_ID_I2C8,
+	PERIPH_ID_I2C9,
+	PERIPH_ID_I2C10,
+	PERIPH_ID_I2C11,
+	PERIPH_ID_I2C12,
+	PERIPH_ID_I2C13,
+	PERIPH_ID_I2C14,
+	PERIPH_ID_SD1,
+	PERIPH_ID_SD2,
+};
+
+#endif  /* _ASM_ARCH_SCU_AST2500_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/platform.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/platform.h
new file mode 100644
index 000000000..d50ec5f8a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/platform.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ * Ryan Chen <ryan_chen@aspeedtech.com>
+ *
+ */
+
+#ifndef _ASM_ARCH_PLATFORM_H
+#define _ASM_ARCH_PLATFORM_H
+
+#if defined(CONFIG_ASPEED_AST2500)
+#define ASPEED_MAC_COUNT	2
+#define ASPEED_DRAM_BASE	0x80000000
+#define ASPEED_SRAM_BASE	0x1e720000
+#define ASPEED_SRAM_SIZE	0x9000
+#elif defined(CONFIG_ASPEED_AST2600)
+#define ASPEED_MAC_COUNT	4
+#define ASPEED_DRAM_BASE	0x80000000
+#define ASPEED_SRAM_BASE	0x10000000
+#define ASPEED_SRAM_SIZE	0x10000
+#else
+#err "Unrecognized Aspeed platform."
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/scu_ast2500.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
new file mode 100644
index 000000000..8db4901cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
@@ -0,0 +1,247 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2016 Google, Inc
+ */
+#ifndef _ASM_ARCH_SCU_AST2500_H
+#define _ASM_ARCH_SCU_AST2500_H
+
+#define SCU_UNLOCK_VALUE		0x1688a8a8
+
+#define SCU_HWSTRAP_VGAMEM_SHIFT	2
+#define SCU_HWSTRAP_VGAMEM_MASK		(3 << SCU_HWSTRAP_VGAMEM_SHIFT)
+#define SCU_HWSTRAP_MAC1_RGMII		(1 << 6)
+#define SCU_HWSTRAP_MAC2_RGMII		(1 << 7)
+#define SCU_HWSTRAP_DDR4		(1 << 24)
+#define SCU_HWSTRAP_CLKIN_25MHZ		(1 << 23)
+
+#define SCU_MPLL_DENUM_SHIFT		0
+#define SCU_MPLL_DENUM_MASK		0x1f
+#define SCU_MPLL_NUM_SHIFT		5
+#define SCU_MPLL_NUM_MASK		(0xff << SCU_MPLL_NUM_SHIFT)
+#define SCU_MPLL_POST_SHIFT		13
+#define SCU_MPLL_POST_MASK		(0x3f << SCU_MPLL_POST_SHIFT)
+#define SCU_PCLK_DIV_SHIFT		23
+#define SCU_PCLK_DIV_MASK		(7 << SCU_PCLK_DIV_SHIFT)
+#define SCU_SDCLK_DIV_SHIFT		12
+#define SCU_SDCLK_DIV_MASK		(7 << SCU_SDCLK_DIV_SHIFT)
+#define SCU_HPLL_DENUM_SHIFT		0
+#define SCU_HPLL_DENUM_MASK		0x1f
+#define SCU_HPLL_NUM_SHIFT		5
+#define SCU_HPLL_NUM_MASK		(0xff << SCU_HPLL_NUM_SHIFT)
+#define SCU_HPLL_POST_SHIFT		13
+#define SCU_HPLL_POST_MASK		(0x3f << SCU_HPLL_POST_SHIFT)
+
+#define SCU_MACCLK_SHIFT		16
+#define SCU_MACCLK_MASK			(7 << SCU_MACCLK_SHIFT)
+
+#define SCU_MISC2_RGMII_HPLL		(1 << 23)
+#define SCU_MISC2_RGMII_CLKDIV_SHIFT	20
+#define SCU_MISC2_RGMII_CLKDIV_MASK	(3 << SCU_MISC2_RGMII_CLKDIV_SHIFT)
+#define SCU_MISC2_RMII_MPLL		(1 << 19)
+#define SCU_MISC2_RMII_CLKDIV_SHIFT	16
+#define SCU_MISC2_RMII_CLKDIV_MASK	(3 << SCU_MISC2_RMII_CLKDIV_SHIFT)
+#define SCU_MISC2_UARTCLK_SHIFT		24
+
+#define SCU_MISC_D2PLL_OFF		(1 << 4)
+#define SCU_MISC_UARTCLK_DIV13		(1 << 12)
+#define SCU_MISC_GCRT_USB20CLK		(1 << 21)
+
+#define SCU_MICDS_MAC1RGMII_TXDLY_SHIFT	0
+#define SCU_MICDS_MAC1RGMII_TXDLY_MASK	(0x3f\
+					 << SCU_MICDS_MAC1RGMII_TXDLY_SHIFT)
+#define SCU_MICDS_MAC2RGMII_TXDLY_SHIFT	6
+#define SCU_MICDS_MAC2RGMII_TXDLY_MASK	(0x3f\
+					 << SCU_MICDS_MAC2RGMII_TXDLY_SHIFT)
+#define SCU_MICDS_MAC1RMII_RDLY_SHIFT	12
+#define SCU_MICDS_MAC1RMII_RDLY_MASK	(0x3f << SCU_MICDS_MAC1RMII_RDLY_SHIFT)
+#define SCU_MICDS_MAC2RMII_RDLY_SHIFT	18
+#define SCU_MICDS_MAC2RMII_RDLY_MASK	(0x3f << SCU_MICDS_MAC2RMII_RDLY_SHIFT)
+#define SCU_MICDS_MAC1RMII_TXFALL	(1 << 24)
+#define SCU_MICDS_MAC2RMII_TXFALL	(1 << 25)
+#define SCU_MICDS_RMII1_RCLKEN		(1 << 29)
+#define SCU_MICDS_RMII2_RCLKEN		(1 << 30)
+#define SCU_MICDS_RGMIIPLL		(1 << 31)
+
+/*
+ * SYSRESET is actually more like a Power register,
+ * except that corresponding bit set to 1 means that
+ * the peripheral is off.
+ */
+#define SCU_SYSRESET_XDMA		(1 << 25)
+#define SCU_SYSRESET_MCTP		(1 << 24)
+#define SCU_SYSRESET_ADC		(1 << 23)
+#define SCU_SYSRESET_JTAG		(1 << 22)
+#define SCU_SYSRESET_MIC		(1 << 18)
+#define SCU_SYSRESET_SDIO		(1 << 16)
+#define SCU_SYSRESET_USB11HOST		(1 << 15)
+#define SCU_SYSRESET_USBHUB		(1 << 14)
+#define SCU_SYSRESET_CRT		(1 << 13)
+#define SCU_SYSRESET_MAC2		(1 << 12)
+#define SCU_SYSRESET_MAC1		(1 << 11)
+#define SCU_SYSRESET_PECI		(1 << 10)
+#define SCU_SYSRESET_PWM		(1 << 9)
+#define SCU_SYSRESET_PCI_VGA		(1 << 8)
+#define SCU_SYSRESET_2D			(1 << 7)
+#define SCU_SYSRESET_VIDEO		(1 << 6)
+#define SCU_SYSRESET_LPC		(1 << 5)
+#define SCU_SYSRESET_HAC		(1 << 4)
+#define SCU_SYSRESET_USBHID		(1 << 3)
+#define SCU_SYSRESET_I2C		(1 << 2)
+#define SCU_SYSRESET_AHB		(1 << 1)
+#define SCU_SYSRESET_SDRAM_WDT		(1 << 0)
+
+/* Bits 16-27 in the register control pin functions for I2C devices 3-14 */
+#define SCU_PINMUX_CTRL5_I2C		(1 << 16)
+
+/*
+ * The values are grouped by function, not by register.
+ * They are actually scattered across multiple loosely related registers.
+ */
+#define SCU_PIN_FUN_MAC1_MDC		(1 << 30)
+#define SCU_PIN_FUN_MAC1_MDIO		(1 << 31)
+#define SCU_PIN_FUN_MAC1_PHY_LINK	(1 << 0)
+#define SCU_PIN_FUN_MAC2_MDIO		(1 << 2)
+#define SCU_PIN_FUN_MAC2_PHY_LINK	(1 << 1)
+#define SCU_PIN_FUN_SCL1		(1 << 12)
+#define SCU_PIN_FUN_SCL2		(1 << 14)
+#define SCU_PIN_FUN_SDA1		(1 << 13)
+#define SCU_PIN_FUN_SDA2		(1 << 15)
+
+#define SCU_CLKSTOP_MAC1		(1 << 20)
+#define SCU_CLKSTOP_MAC2		(1 << 21)
+#define SCU_CLKSTOP_SDCLK		(1 << 27)
+
+#define SCU_D2PLL_EXT1_OFF		(1 << 0)
+#define SCU_D2PLL_EXT1_BYPASS		(1 << 1)
+#define SCU_D2PLL_EXT1_RESET		(1 << 2)
+#define SCU_D2PLL_EXT1_MODE_SHIFT	3
+#define SCU_D2PLL_EXT1_MODE_MASK	(3 << SCU_D2PLL_EXT1_MODE_SHIFT)
+#define SCU_D2PLL_EXT1_PARAM_SHIFT	5
+#define SCU_D2PLL_EXT1_PARAM_MASK	(0x1ff << SCU_D2PLL_EXT1_PARAM_SHIFT)
+
+#define SCU_D2PLL_NUM_SHIFT		0
+#define SCU_D2PLL_NUM_MASK		(0xff << SCU_D2PLL_NUM_SHIFT)
+#define SCU_D2PLL_DENUM_SHIFT		8
+#define SCU_D2PLL_DENUM_MASK		(0x1f << SCU_D2PLL_DENUM_SHIFT)
+#define SCU_D2PLL_POST_SHIFT		13
+#define SCU_D2PLL_POST_MASK		(0x3f << SCU_D2PLL_POST_SHIFT)
+#define SCU_D2PLL_ODIV_SHIFT		19
+#define SCU_D2PLL_ODIV_MASK		(7 << SCU_D2PLL_ODIV_SHIFT)
+#define SCU_D2PLL_SIC_SHIFT		22
+#define SCU_D2PLL_SIC_MASK		(0x1f << SCU_D2PLL_SIC_SHIFT)
+#define SCU_D2PLL_SIP_SHIFT		27
+#define SCU_D2PLL_SIP_MASK		(0x1f << SCU_D2PLL_SIP_SHIFT)
+
+#define SCU_CLKDUTY_DCLK_SHIFT		0
+#define SCU_CLKDUTY_DCLK_MASK		(0x3f << SCU_CLKDUTY_DCLK_SHIFT)
+#define SCU_CLKDUTY_RGMII1TXCK_SHIFT	8
+#define SCU_CLKDUTY_RGMII1TXCK_MASK	(0x7f << SCU_CLKDUTY_RGMII1TXCK_SHIFT)
+#define SCU_CLKDUTY_RGMII2TXCK_SHIFT	16
+#define SCU_CLKDUTY_RGMII2TXCK_MASK	(0x7f << SCU_CLKDUTY_RGMII2TXCK_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+struct ast2500_clk_priv {
+	struct ast2500_scu *scu;
+};
+
+struct ast2500_scu {
+	u32 protection_key;
+	u32 sysreset_ctrl1;
+	u32 clk_sel1;
+	u32 clk_stop_ctrl1;
+	u32 freq_counter_ctrl;
+	u32 freq_counter_cmp;
+	u32 intr_ctrl;
+	u32 d2_pll_param;
+	u32 m_pll_param;
+	u32 h_pll_param;
+	u32 d_pll_param;
+	u32 misc_ctrl1;
+	u32 pci_config[3];
+	u32 sysreset_status;
+	u32 vga_handshake[2];
+	u32 mac_clk_delay;
+	u32 misc_ctrl2;
+	u32 vga_scratch[8];
+	u32 hwstrap;
+	u32 rng_ctrl;
+	u32 rng_data;
+	u32 rev_id;
+	u32 pinmux_ctrl[6];
+	u32 reserved0;
+	u32 extrst_sel;
+	u32 pinmux_ctrl1[4];
+	u32 reserved1[2];
+	u32 mac_clk_delay_100M;
+	u32 mac_clk_delay_10M;
+	u32 wakeup_enable;
+	u32 wakeup_control;
+	u32 reserved2[3];
+	u32 sysreset_ctrl2;
+	u32 clk_sel2;
+	u32 clk_stop_ctrl2;
+	u32 freerun_counter;
+	u32 freerun_counter_ext;
+	u32 clk_duty_meas_ctrl;
+	u32 clk_duty_meas_res;
+	u32 reserved3[4];
+	/* The next registers are not key-protected */
+	struct ast2500_cpu2 {
+		u32 ctrl;
+		u32 base_addr[9];
+		u32 cache_ctrl;
+	} cpu2;
+	u32 reserved4;
+	u32 d_pll_ext_param[3];
+	u32 d2_pll_ext_param[3];
+	u32 mh_pll_ext_param;
+	u32 reserved5;
+	u32 chip_id[2];
+	u32 reserved6[2];
+	u32 uart_clk_ctrl;
+	u32 reserved7[7];
+	u32 pcie_config;
+	u32 mmio_decode;
+	u32 reloc_ctrl_decode[2];
+	u32 mailbox_addr;
+	u32 shared_sram_decode[2];
+	u32 bmc_rev_id;
+	u32 reserved8;
+	u32 bmc_device_id;
+	u32 reserved9[13];
+	u32 clk_duty_sel;
+};
+
+/**
+ * ast_get_clk() - get a pointer to Clock Driver
+ *
+ * @devp, OUT - pointer to Clock Driver
+ * @return zero on success, error code (< 0) otherwise.
+ */
+int ast_get_clk(struct udevice **devp);
+
+/**
+ * ast_get_scu() - get a pointer to SCU registers
+ *
+ * @return pointer to struct ast2500_scu on success, ERR_PTR otherwise
+ */
+void *ast_get_scu(void);
+
+/**
+ * ast_scu_unlock() - unlock protected registers
+ *
+ * @scu, pointer to ast2500_scu
+ */
+void ast_scu_unlock(struct ast2500_scu *scu);
+
+/**
+ * ast_scu_lock() - lock protected registers
+ *
+ * @scu, pointer to ast2500_scu
+ */
+void ast_scu_lock(struct ast2500_scu *scu);
+
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* _ASM_ARCH_SCU_AST2500_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/scu_ast2600.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/scu_ast2600.h
new file mode 100644
index 000000000..a205fb1f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/scu_ast2600.h
@@ -0,0 +1,338 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#ifndef _ASM_ARCH_SCU_AST2600_H
+#define _ASM_ARCH_SCU_AST2600_H
+
+#define SCU_UNLOCK_KEY			0x1688a8a8
+
+#define SCU_CLKGATE1_EMMC			BIT(27)
+#define SCU_CLKGATE1_MAC2			BIT(21)
+#define SCU_CLKGATE1_MAC1			BIT(20)
+#define SCU_CLKGATE1_USB_HUB		BIT(14)
+#define SCU_CLKGATE1_USB_HOST2		BIT(7)
+
+#define SCU_CLKGATE2_FSI			BIT(30)
+#define SCU_CLKGATE2_MAC4			BIT(21)
+#define SCU_CLKGATE2_MAC3			BIT(20)
+#define SCU_CLKGATE2_SDIO			BIT(4)
+
+#define SCU_DRAM_HDSHK_SOC_INIT			BIT(7)
+#define SCU_DRAM_HDSHK_RDY			BIT(6)
+
+#define SCU_CLKSRC1_ECC_RSA_DIV_MASK		GENMASK(27, 26)
+#define SCU_CLKSRC1_ECC_RSA_DIV_SHIFT		26
+#define SCU_CLKSRC1_PCLK_DIV_MASK		GENMASK(25, 23)
+#define SCU_CLKSRC1_PCLK_DIV_SHIFT		23
+#define SCU_CLKSRC1_BCLK_DIV_MASK		GENMASK(22, 20)
+#define SCU_CLKSRC1_BCLK_DIV_SHIFT		20
+#define SCU_CLKSRC1_ECC_RSA			BIT(19)
+#define SCU_CLKSRC1_MAC_DIV_MASK		GENMASK(18, 16)
+#define SCU_CLKSRC1_MAC_DIV_SHIFT		16
+#define SCU_CLKSRC1_EMMC_EN			BIT(15)
+#define SCU_CLKSRC1_EMMC_DIV_MASK		GENMASK(14, 12)
+#define SCU_CLKSRC1_EMMC_DIV_SHIFT		12
+#define SCU_CLKSRC1_EMMC			BIT(11)
+
+#define SCU_CLKSRC2_RMII12			BIT(19)
+#define SCU_CLKSRC2_RMII12_DIV_MASK		GENMASK(18, 16)
+#define SCU_CLKSRC2_RMII12_DIV_SHIFT		16
+#define SCU_CLKSRC2_UART5			BIT(14)
+
+#define SCU_CLKSRC4_SDIO_EN			BIT(31)
+#define SCU_CLKSRC4_SDIO_DIV_MASK		GENMASK(30, 28)
+#define SCU_CLKSRC4_SDIO_DIV_SHIFT		28
+#define SCU_CLKSRC4_MAC_DIV_MASK		GENMASK(26, 24)
+#define SCU_CLKSRC4_MAC_DIV_SHIFT		24
+#define SCU_CLKSRC4_RMII34_DIV_MASK		GENMASK(18, 16)
+#define SCU_CLKSRC4_RMII34_DIV_SHIFT		16
+#define SCU_CLKSRC4_PCLK_DIV_MASK		GENMASK(11, 9)
+#define SCU_CLKSRC4_PCLK_DIV_SHIFT		9
+#define SCU_CLKSRC4_SDIO			BIT(8)
+#define SCU_CLKSRC4_UART6			BIT(5)
+#define SCU_CLKSRC4_UART4			BIT(3)
+#define SCU_CLKSRC4_UART3			BIT(2)
+#define SCU_CLKSRC4_UART2			BIT(1)
+#define SCU_CLKSRC4_UART1			BIT(0)
+
+#define SCU_CLKSRC5_UART13			BIT(12)
+#define SCU_CLKSRC5_UART12			BIT(11)
+#define SCU_CLKSRC5_UART11			BIT(10)
+#define SCU_CLKSRC5_UART10			BIT(9)
+#define SCU_CLKSRC5_UART9			BIT(8)
+#define SCU_CLKSRC5_UART8			BIT(7)
+#define SCU_CLKSRC5_UART7			BIT(6)
+#define SCU_CLKSRC5_HUXCLK_MASK			GENMASK(5, 3)
+#define SCU_CLKSRC5_HUXCLK_SHIFT		3
+#define SCU_CLKSRC5_UXCLK_MASK			GENMASK(2, 0)
+#define SCU_CLKSRC5_UXCLK_SHIFT			0
+
+#define SCU_PINCTRL1_EMMC_MASK			GENMASK(31, 24)
+#define SCU_PINCTRL1_EMMC_SHIFT			24
+
+#define SCU_PINCTRL16_MAC4_DRIVING_MASK		GENMASK(3, 2)
+#define SCU_PINCTRL16_MAC4_DRIVING_SHIFT	2
+#define SCU_PINCTRL16_MAC3_DRIVING_MASK		GENMASK(1, 0)
+#define SCU_PINCTRL16_MAC3_DRIVING_SHIFT	0
+
+#define SCU_HWSTRAP1_CPU_AXI_CLK_RATIO		BIT(16)
+#define SCU_HWSTRAP1_VGA_MEM_MASK		GENMASK(14, 13)
+#define SCU_HWSTRAP1_VGA_MEM_SHIFT		13
+#define SCU_HWSTRAP1_AXI_AHB_CLK_RATIO_MASK	GENMASK(12, 11)
+#define SCU_HWSTRAP1_AXI_AHB_CLK_RATIO_SHIFT	11
+#define SCU_HWSTRAP1_CPU_FREQ_MASK		GENMASK(10, 8)
+#define SCU_HWSTRAP1_CPU_FREQ_SHIFT		8
+#define SCU_HWSTRAP1_MAC2_INTF			BIT(7)
+#define SCU_HWSTRAP1_MAC1_INTF			BIT(6)
+
+#define SCU_EFUSE_DIS_DP			BIT(17)
+#define SCU_EFUSE_DIS_VGA			BIT(14)
+#define SCU_EFUSE_DIS_PCIE_EP			BIT(13)
+#define SCU_EFUSE_DIS_USB			BIT(12)
+#define SCU_EFUSE_DIS_RVAS			BIT(10)
+#define SCU_EFUSE_DIS_VIDEO_DEC			BIT(9)
+#define SCU_EFUSE_DIS_VIDEO			BIT(8)
+#define SCU_EFUSE_DIS_PCIE_RC			BIT(7)
+#define SCU_EFUSE_DIS_CM3			BIT(6)
+#define SCU_EFUSE_DIS_CA7			BIT(5)
+
+#define SCU_PLL_RST				BIT(25)
+#define SCU_PLL_BYPASS				BIT(24)
+#define SCU_PLL_OFF				BIT(23)
+#define SCU_PLL_DIV_MASK			GENMASK(22, 19)
+#define SCU_PLL_DIV_SHIFT			19
+#define SCU_PLL_DENUM_MASK			GENMASK(18, 13)
+#define SCU_PLL_DENUM_SHIFT			13
+#define SCU_PLL_NUM_MASK			GENMASK(12, 0)
+#define SCU_PLL_NUM_SHIFT			0
+
+#define SCU_UART_CLKGEN_N_MASK			GENMASK(17, 8)
+#define SCU_UART_CLKGEN_N_SHIFT			8
+#define SCU_UART_CLKGEN_R_MASK			GENMASK(7, 0)
+#define SCU_UART_CLKGEN_R_SHIFT			0
+
+#define SCU_HUART_CLKGEN_N_MASK			GENMASK(17, 8)
+#define SCU_HUART_CLKGEN_N_SHIFT		8
+#define SCU_HUART_CLKGEN_R_MASK			GENMASK(7, 0)
+#define SCU_HUART_CLKGEN_R_SHIFT		0
+
+#define SCU_MISC_CTRL1_UART5_DIV		BIT(12)
+
+#ifndef __ASSEMBLY__
+struct ast2600_scu {
+	uint32_t prot_key1;		/* 0x000 */
+	uint32_t chip_id1;		/* 0x004 */
+	uint32_t rsv_0x08;		/* 0x008 */
+	uint32_t rsv_0x0c;		/* 0x00C */
+	uint32_t prot_key2;		/* 0x010 */
+	uint32_t chip_id2;		/* 0x014 */
+	uint32_t rsv_0x18[10];		/* 0x018 ~ 0x03C */
+	uint32_t modrst_ctrl1;		/* 0x040 */
+	uint32_t modrst_clr1;		/* 0x044 */
+	uint32_t rsv_0x48;		/* 0x048 */
+	uint32_t rsv_0x4C;		/* 0x04C */
+	uint32_t modrst_ctrl2;		/* 0x050 */
+	uint32_t modrst_clr2;		/* 0x054 */
+	uint32_t rsv_0x58;		/* 0x058 */
+	uint32_t rsv_0x5C;		/* 0x05C */
+	uint32_t extrst_sel1;		/* 0x060 */
+	uint32_t sysrst_sts1_1;		/* 0x064 */
+	uint32_t sysrst_sts1_2;		/* 0x068 */
+	uint32_t sysrst_sts1_3;		/* 0x06C */
+	uint32_t extrst_sel2;		/* 0x070 */
+	uint32_t sysrst_sts2_1;		/* 0x074 */
+	uint32_t sysrst_sts2_2;		/* 0x078 */
+	uint32_t stsrst_sts3_2;		/* 0x07C */
+	uint32_t clkgate_ctrl1;		/* 0x080 */
+	uint32_t clkgate_clr1;		/* 0x084 */
+	uint32_t rsv_0x88;		/* 0x088 */
+	uint32_t rsv_0x8C;		/* 0x08C */
+	uint32_t clkgate_ctrl2;		/* 0x090 */
+	uint32_t clkgate_clr2;		/* 0x094 */
+	uint32_t rsv_0x98[10];		/* 0x098 ~ 0x0BC */
+	uint32_t misc_ctrl1;		/* 0x0C0 */
+	uint32_t misc_ctrl2;		/* 0x0C4 */
+	uint32_t debug_ctrl1;		/* 0x0C8 */
+	uint32_t rsv_0xCC;		/* 0x0CC */
+	uint32_t misc_ctrl3;		/* 0x0D0 */
+	uint32_t misc_ctrl4;		/* 0x0D4 */
+	uint32_t debug_ctrl2;		/* 0x0D8 */
+	uint32_t rsv_0xdc[9];		/* 0x0DC ~ 0x0FC */
+	uint32_t dram_hdshk;		/* 0x100 */
+	uint32_t soc_scratch[3];	/* 0x104 ~ 0x10C */
+	uint32_t rsv_0x110[4];		/* 0x110 ~ 0x11C*/
+	uint32_t cpu_scratch_wp;	/* 0x120 */
+	uint32_t rsv_0x124[23];		/* 0x124 */
+	uint32_t smp_boot[12];		/* 0x180 */
+	uint32_t cpu_scratch[20];	/* 0x1b0 */
+	uint32_t hpll;			/* 0x200 */
+	uint32_t hpll_ext;		/* 0x204 */
+	uint32_t rsv_0x208[2];		/* 0x208 ~ 0x20C */
+	uint32_t apll;			/* 0x210 */
+	uint32_t apll_ext;		/* 0x214 */
+	uint32_t rsv_0x218[2];		/* 0x218 ~ 0x21C */
+	uint32_t mpll;			/* 0x220 */
+	uint32_t mpll_ext;		/* 0x224 */
+	uint32_t rsv_0x228[6];		/* 0x228 ~ 0x23C */
+	uint32_t epll;			/* 0x240 */
+	uint32_t epll_ext;		/* 0x244 */
+	uint32_t rsv_0x248[6];		/* 0x248 ~ 0x25C */
+	uint32_t dpll;			/* 0x260 */
+	uint32_t dpll_ext;		/* 0x264 */
+	uint32_t rsv_0x268[38];		/* 0x268 ~ 0x2FC */
+	uint32_t clksrc1;		/* 0x300 */
+	uint32_t clksrc2;		/* 0x304 */
+	uint32_t clksrc3;		/* 0x308 */
+	uint32_t rsv_0x30c;		/* 0x30C */
+	uint32_t clksrc4;		/* 0x310 */
+	uint32_t clksrc5;		/* 0x314 */
+	uint32_t rsv_0x318[2];		/* 0x318 ~ 0x31C */
+	uint32_t freq_counter_ctrl1;	/* 0x320 */
+	uint32_t freq_counter_cmp1;	/* 0x324 */
+	uint32_t rsv_0x328[2];		/* 0x328 ~ 0x32C */
+	uint32_t freq_counter_ctrl2;	/* 0x330 */
+	uint32_t freq_counter_cmp2;	/* 0x334 */
+	uint32_t uart_clkgen;		/* 0x338 */
+	uint32_t huart_clkgen;		/* 0x33C */
+	uint32_t mac12_clk_delay;	/* 0x340 */
+	uint32_t rsv_0x344;		/* 0x344 */
+	uint32_t mac12_clk_delay_100M;	/* 0x348 */
+	uint32_t mac12_clk_delay_10M;	/* 0x34C */
+	uint32_t mac34_clk_delay;	/* 0x350 */
+	uint32_t rsv_0x354;		/* 0x354 */
+	uint32_t mac34_clk_delay_100M;	/* 0x358 */
+	uint32_t mac34_clk_delay_10M;	/* 0x35C */
+	uint32_t clkduty_meas_ctrl;	/* 0x360 */
+	uint32_t clkduty1;		/* 0x364 */
+	uint32_t clkduty2;		/* 0x368 */
+	uint32_t clkduty_meas_res;	/* 0x36C */
+	uint32_t clkduty_meas_ctrl2;	/* 0x370 */
+	uint32_t clkduty3;		/* 0x374 */
+	uint32_t rsv_0x378[34];		/* 0x378 ~ 0x3FC */
+	uint32_t pinmux1;		/* 0x400 */
+	uint32_t pinmux2;		/* 0x404 */
+	uint32_t rsv_0x408;		/* 0x408 */
+	uint32_t pinmux3;		/* 0x40C */
+	uint32_t pinmux4;		/* 0x410 */
+	uint32_t pinmux5;		/* 0x414 */
+	uint32_t pinmux6;		/* 0x418 */
+	uint32_t pinmux7;		/* 0x41C */
+	uint32_t rsv_0x420[4];		/* 0x420 ~ 0x42C */
+	uint32_t pinmux8;		/* 0x430 */
+	uint32_t pinmux9;		/* 0x434 */
+	uint32_t pinmux10;		/* 0x438 */
+	uint32_t rsv_0x43c;		/* 0x43C */
+	uint32_t pinmux12;		/* 0x440 */
+	uint32_t pinmux13;		/* 0x444 */
+	uint32_t rsv_0x448[2];		/* 0x448 ~ 0x44C */
+	uint32_t pinmux14;		/* 0x450 */
+	uint32_t pinmux15;		/* 0x454 */
+	uint32_t pinmux16;		/* 0x458 */
+	uint32_t rsv_0x45c[21];		/* 0x45C ~ 0x4AC */
+	uint32_t pinmux17;		/* 0x4B0 */
+	uint32_t pinmux18;		/* 0x4B4 */
+	uint32_t pinmux19;		/* 0x4B8 */
+	uint32_t pinmux20;		/* 0x4BC */
+	uint32_t rsv_0x4c0[5];		/* 0x4C0 ~ 0x4D0 */
+	uint32_t pinmux22;		/* 0x4D4 */
+	uint32_t pinmux23;		/* 0x4D8 */
+	uint32_t rsv_0x4dc[9];		/* 0x4DC ~ 0x4FC */
+	uint32_t hwstrap1;		/* 0x500 */
+	uint32_t hwstrap_clr1;		/* 0x504 */
+	uint32_t hwstrap_prot1;		/* 0x508 */
+	uint32_t rsv_0x50c;		/* 0x50C */
+	uint32_t hwstrap2;		/* 0x510 */
+	uint32_t hwstrap_clr2;		/* 0x514 */
+	uint32_t hwstrap_prot2;		/* 0x518 */
+	uint32_t rsv_0x51c;		/* 0x51C */
+	uint32_t rng_ctrl;		/* 0x520 */
+	uint32_t rng_data;		/* 0x524 */
+	uint32_t rsv_0x528[6];		/* 0x528 ~ 0x53C */
+	uint32_t pwr_save_wakeup_en1;	/* 0x540 */
+	uint32_t pwr_save_wakeup_ctrl1;	/* 0x544 */
+	uint32_t rsv_0x548[2];		/* 0x548 */
+	uint32_t pwr_save_wakeup_en2;	/* 0x550 */
+	uint32_t pwr_save_wakeup_ctrl2;	/* 0x554 */
+	uint32_t rsv_0x558[2];		/* 0x558 */
+	uint32_t intr1_ctrl_sts;	/* 0x560 */
+	uint32_t rsv_0x564[3];		/* 0x564 */
+	uint32_t intr2_ctrl_sts;	/* 0x570 */
+	uint32_t rsv_0x574[7];		/* 0x574 ~ 0x58C */
+	uint32_t otp_ctrl;		/* 0x590 */
+	uint32_t efuse;			/* 0x594 */
+	uint32_t rsv_0x598[6];		/* 0x598 */
+	uint32_t chip_unique_id[8];	/* 0x5B0 */
+	uint32_t rsv_0x5e0[8];		/* 0x5E0 ~ 0x5FC */
+	uint32_t disgpio_in_pull_down0;	/* 0x610 */
+	uint32_t disgpio_in_pull_down1;	/* 0x614 */
+	uint32_t disgpio_in_pull_down2;	/* 0x618 */
+	uint32_t disgpio_in_pull_down3;	/* 0x61C */
+	uint32_t rsv_0x620[4];		/* 0x620 ~ 0x62C */
+	uint32_t disgpio_in_pull_down4;	/* 0x630 */
+	uint32_t disgpio_in_pull_down5;	/* 0x634 */
+	uint32_t disgpio_in_pull_down6;	/* 0x638 */
+	uint32_t rsv_0x63c[5];		/* 0x63C ~ 0x64C */
+	uint32_t sli_driving_strength;	/* 0x650 */
+	uint32_t rsv_0x654[107];	/* 0x654 ~ 0x7FC */
+	uint32_t ca7_ctrl1;		/* 0x800 */
+	uint32_t ca7_ctrl2;		/* 0x804 */
+	uint32_t ca7_ctrl3;		/* 0x808 */
+	uint32_t ca7_ctrl4;		/* 0x80C */
+	uint32_t rsv_0x810[4];		/* 0x810 ~ 0x81C */
+	uint32_t ca7_parity_chk;	/* 0x820 */
+	uint32_t ca7_parity_clr;	/* 0x824 */
+	uint32_t rsv_0x828[118];	/* 0x828 ~ 0x9FC */
+	uint32_t cm3_ctrl;		/* 0xA00 */
+	uint32_t cm3_base;		/* 0xA04 */
+	uint32_t cm3_imem_addr;		/* 0xA08 */
+	uint32_t cm3_dmem_addr;		/* 0xA0C */
+	uint32_t rsv_0xa10[12];		/* 0xA10 ~ 0xA3C */
+	uint32_t cm3_cache_area;	/* 0xA40 */
+	uint32_t cm3_cache_invd_ctrl;	/* 0xA44 */
+	uint32_t cm3_cache_func_ctrl;	/* 0xA48 */
+	uint32_t rsv_0xa4c[108];	/* 0xA4C ~ 0xBFC */
+	uint32_t pci_cfg[3];		/* 0xC00 */
+	uint32_t rsv_0xc0c[5];		/* 0xC0C ~ 0xC1C */
+	uint32_t pcie_cfg;		/* 0xC20 */
+	uint32_t mmio_decode;		/* 0xC24 */
+	uint32_t reloc_ctrl_decode[2];	/* 0xC28 */
+	uint32_t rsv_0xc30[4];		/* 0xC30 ~ 0xC3C */
+	uint32_t mbox_decode;		/* 0xC40 */
+	uint32_t shared_sram_decode[2];	/* 0xC44 */
+	uint32_t bmc_rev_id;		/* 0xC4C */
+	uint32_t rsv_0xc50[5];		/* 0xC50 ~ 0xC60 */
+	uint32_t bmc_device_id;		/* 0xC64 */
+	uint32_t rsv_0xc68[102];	/* 0xC68 ~ 0xDFC */
+	uint32_t vga_scratch1;		/* 0xE00 */
+	uint32_t vga_scratch2;		/* 0xE04 */
+	uint32_t vga_scratch3;		/* 0xE08 */
+	uint32_t vga_scratch4;		/* 0xE0C */
+	uint32_t rsv_0xe10[4];		/* 0xE10 ~ 0xE1C */
+	uint32_t vga_scratch5;		/* 0xE20 */
+	uint32_t vga_scratch6;		/* 0xE24 */
+	uint32_t vga_scratch7;		/* 0xE28 */
+	uint32_t vga_scratch8;		/* 0xE2C */
+	uint32_t rsv_0xe30[52];		/* 0xE30 ~ 0xEFC */
+	uint32_t wr_prot1;		/* 0xF00 */
+	uint32_t wr_prot2;		/* 0xF04 */
+	uint32_t wr_prot3;		/* 0xF08 */
+	uint32_t wr_prot4;		/* 0xF0C */
+	uint32_t wr_prot5;		/* 0xF10 */
+	uint32_t wr_prot6;		/* 0xF18 */
+	uint32_t wr_prot7;		/* 0xF1C */
+	uint32_t wr_prot8;		/* 0xF20 */
+	uint32_t wr_prot9;		/* 0xF24 */
+	uint32_t rsv_0xf28[2];		/* 0xF28 ~ 0xF2C */
+	uint32_t wr_prot10;		/* 0xF30 */
+	uint32_t wr_prot11;		/* 0xF34 */
+	uint32_t wr_prot12;		/* 0xF38 */
+	uint32_t wr_prot13;		/* 0xF3C */
+	uint32_t wr_prot14;		/* 0xF40 */
+	uint32_t rsv_0xf44;		/* 0xF44 */
+	uint32_t wr_prot15;		/* 0xF48 */
+	uint32_t rsv_0xf4c[5];		/* 0xF4C ~ 0xF5C */
+	uint32_t wr_prot16;		/* 0xF60 */
+};
+#endif
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/sdram_ast2500.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/sdram_ast2500.h
new file mode 100644
index 000000000..0bc551fbe
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/sdram_ast2500.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2016 Google, Inc
+ */
+#ifndef _ASM_ARCH_SDRAM_AST2500_H
+#define _ASM_ARCH_SDRAM_AST2500_H
+
+#define SDRAM_UNLOCK_KEY		0xfc600309
+#define SDRAM_VIDEO_UNLOCK_KEY		0x2003000f
+
+#define SDRAM_PCR_CKE_EN		(1 << 0)
+#define SDRAM_PCR_AUTOPWRDN_EN		(1 << 1)
+#define SDRAM_PCR_CKE_DELAY_SHIFT	4
+#define SDRAM_PCR_CKE_DELAY_MASK	7
+#define SDRAM_PCR_RESETN_DIS		(1 << 7)
+#define SDRAM_PCR_ODT_EN		(1 << 8)
+#define SDRAM_PCR_ODT_AUTO_ON		(1 << 10)
+#define SDRAM_PCR_ODT_EXT_EN		(1 << 11)
+#define SDRAM_PCR_TCKE_PW_SHIFT		12
+#define SDRAM_PCR_TCKE_PW_MASK		7
+#define SDRAM_PCR_RGAP_CTRL_EN		(1 << 15)
+#define SDRAM_PCR_MREQI_DIS		(1 << 17)
+
+/* Fixed priority DRAM Requests mask */
+#define SDRAM_REQ_VGA_HW_CURSOR		(1 << 0)
+#define SDRAM_REQ_VGA_TEXT_CG_FONT	(1 << 1)
+#define SDRAM_REQ_VGA_TEXT_ASCII	(1 << 2)
+#define SDRAM_REQ_VGA_CRT		(1 << 3)
+#define SDRAM_REQ_SOC_DC_CURSOR		(1 << 4)
+#define SDRAM_REQ_SOC_DC_OCD		(1 << 5)
+#define SDRAM_REQ_SOC_DC_CRT		(1 << 6)
+#define SDRAM_REQ_VIDEO_HIPRI_WRITE	(1 << 7)
+#define SDRAM_REQ_USB20_EHCI1		(1 << 8)
+#define SDRAM_REQ_USB20_EHCI2		(1 << 9)
+#define SDRAM_REQ_CPU			(1 << 10)
+#define SDRAM_REQ_AHB2			(1 << 11)
+#define SDRAM_REQ_AHB			(1 << 12)
+#define SDRAM_REQ_MAC0			(1 << 13)
+#define SDRAM_REQ_MAC1			(1 << 14)
+#define SDRAM_REQ_PCIE			(1 << 16)
+#define SDRAM_REQ_XDMA			(1 << 17)
+#define SDRAM_REQ_ENCRYPTION		(1 << 18)
+#define SDRAM_REQ_VIDEO_FLAG		(1 << 21)
+#define SDRAM_REQ_VIDEO_LOW_PRI_WRITE	(1 << 28)
+#define SDRAM_REQ_2D_RW			(1 << 29)
+#define SDRAM_REQ_MEMCHECK		(1 << 30)
+
+#define SDRAM_ICR_RESET_ALL		(1 << 31)
+
+#define SDRAM_CONF_CAP_SHIFT		0
+#define SDRAM_CONF_CAP_MASK		3
+#define SDRAM_CONF_DDR4			(1 << 4)
+#define SDRAM_CONF_SCRAMBLE		(1 << 8)
+#define SDRAM_CONF_SCRAMBLE_PAT2	(1 << 9)
+#define SDRAM_CONF_CACHE_EN		(1 << 10)
+#define SDRAM_CONF_CACHE_INIT_EN	(1 << 12)
+#define SDRAM_CONF_DUALX8		(1 << 13)
+#define SDRAM_CONF_CACHE_INIT_DONE	(1 << 19)
+
+#define SDRAM_CONF_CAP_128M		0
+#define SDRAM_CONF_CAP_256M		1
+#define SDRAM_CONF_CAP_512M		2
+#define SDRAM_CONF_CAP_1024M		3
+
+#define SDRAM_MISC_DDR4_TREFRESH	(1 << 3)
+
+#define SDRAM_PHYCTRL0_INIT		(1 << 0)
+#define SDRAM_PHYCTRL0_AUTO_UPDATE	(1 << 1)
+#define SDRAM_PHYCTRL0_NRST		(1 << 2)
+
+#define SDRAM_REFRESH_CYCLES_SHIFT	0
+#define SDRAM_REFRESH_CYCLES_MASK	0xf
+#define SDRAM_REFRESH_ZQCS_EN		(1 << 7)
+#define SDRAM_REFRESH_PERIOD_SHIFT	8
+#define SDRAM_REFRESH_PERIOD_MASK	0xf
+
+#define SDRAM_TEST_LEN_SHIFT		4
+#define SDRAM_TEST_LEN_MASK		0xfffff
+#define SDRAM_TEST_START_ADDR_SHIFT	24
+#define SDRAM_TEST_START_ADDR_MASK	0x3f
+
+#define SDRAM_TEST_EN			(1 << 0)
+#define SDRAM_TEST_MODE_SHIFT		1
+#define SDRAM_TEST_MODE_MASK		3
+#define SDRAM_TEST_MODE_WO		0
+#define SDRAM_TEST_MODE_RB		1
+#define SDRAM_TEST_MODE_RW		2
+#define SDRAM_TEST_GEN_MODE_SHIFT	3
+#define SDRAM_TEST_GEN_MODE_MASK	7
+#define SDRAM_TEST_TWO_MODES		(1 << 6)
+#define SDRAM_TEST_ERRSTOP		(1 << 7)
+#define SDRAM_TEST_DONE			(1 << 12)
+#define SDRAM_TEST_FAIL			(1 << 13)
+
+#define SDRAM_AC_TRFC_SHIFT		0
+#define SDRAM_AC_TRFC_MASK		0xff
+
+#ifndef __ASSEMBLY__
+
+struct ast2500_sdrammc_regs {
+	u32 protection_key;
+	u32 config;
+	u32 gm_protection_key;
+	u32 refresh_timing;
+	u32 ac_timing[3];
+	u32 misc_control;
+	u32 mr46_mode_setting;
+	u32 mr5_mode_setting;
+	u32 mode_setting_control;
+	u32 mr02_mode_setting;
+	u32 mr13_mode_setting;
+	u32 power_control;
+	u32 req_limit_mask;
+	u32 pri_group_setting;
+	u32 max_grant_len[4];
+	u32 intr_ctrl;
+	u32 ecc_range_ctrl;
+	u32 first_ecc_err_addr;
+	u32 last_ecc_err_addr;
+	u32 phy_ctrl[4];
+	u32 ecc_test_ctrl;
+	u32 test_addr;
+	u32 test_fail_dq_bit;
+	u32 test_init_val;
+	u32 phy_debug_ctrl;
+	u32 phy_debug_data;
+	u32 reserved1[30];
+	u32 scu_passwd;
+	u32 reserved2[7];
+	u32 scu_mpll;
+	u32 reserved3[19];
+	u32 scu_hwstrap;
+};
+
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* _ASM_ARCH_SDRAM_AST2500_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h
new file mode 100644
index 000000000..d2408c002
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#ifndef _ASM_ARCH_SDRAM_AST2600_H
+#define _ASM_ARCH_SDRAM_AST2600_H
+
+/* keys for unlocking HW */
+#define SDRAM_UNLOCK_KEY		0xFC600309
+#define SDRAM_VIDEO_UNLOCK_KEY		0x00440003
+
+/* Fixed priority DRAM Requests mask */
+#define REQ_PRI_VGA_HW_CURSOR_R         0
+#define REQ_PRI_VGA_CRT_R               1
+#define REQ_PRI_SOC_DISPLAY_CTRL_R      2
+#define REQ_PRI_PCIE_BUS1_RW            3
+#define REQ_PRI_VIDEO_HIGH_PRI_W        4
+#define REQ_PRI_CPU_RW                  5
+#define REQ_PRI_SLI_RW                  6
+#define REQ_PRI_PCIE_BUS2_RW            7
+#define REQ_PRI_USB2_0_HUB_EHCI1_DMA_RW 8
+#define REQ_PRI_USB2_0_DEV_EHCI2_DMA_RW 9
+#define REQ_PRI_USB1_1_UHCI_HOST_RW     10
+#define REQ_PRI_AHB_BUS_RW              11
+#define REQ_PRI_CM3_DATA_RW             12
+#define REQ_PRI_CM3_INST_R              13
+#define REQ_PRI_MAC0_DMA_RW             14
+#define REQ_PRI_MAC1_DMA_RW             15
+#define REQ_PRI_SDIO_DMA_RW             16
+#define REQ_PRI_PILOT_ENGINE_RW         17
+#define REQ_PRI_XDMA1_RW                18
+#define REQ_PRI_MCTP1_RW                19
+#define REQ_PRI_VIDEO_FLAG_RW           20
+#define REQ_PRI_VIDEO_LOW_PRI_W         21
+#define REQ_PRI_2D_ENGINE_DATA_RW       22
+#define REQ_PRI_ENC_ENGINE_RW           23
+#define REQ_PRI_MCTP2_RW                24
+#define REQ_PRI_XDMA2_RW                25
+#define REQ_PRI_ECC_RSA_RW              26
+
+#define MCR30_RESET_DLL_DELAY_EN	BIT(4)
+#define MCR30_MODE_REG_SEL_SHIFT	1
+#define MCR30_MODE_REG_SEL_MASK		GENMASK(3, 1)
+#define MCR30_SET_MODE_REG		BIT(0)
+
+#define MCR30_SET_MR(mr) ((mr << MCR30_MODE_REG_SEL_SHIFT) | MCR30_SET_MODE_REG)
+
+#define MCR34_SELF_REFRESH_STATUS_MASK	GENMASK(30, 28)
+
+#define MCR34_ODT_DELAY_SHIFT		12
+#define MCR34_ODT_DELAY_MASK		GENMASK(15, 12)
+#define MCR34_ODT_EXT_SHIFT		10
+#define MCR34_ODT_EXT_MASK		GENMASK(11, 10)
+#define MCR34_ODT_AUTO_ON		BIT(9)
+#define MCR34_ODT_EN			BIT(8)
+#define MCR34_RESETN_DIS		BIT(7)
+#define MCR34_MREQI_DIS			BIT(6)
+#define MCR34_MREQ_BYPASS_DIS		BIT(5)
+#define MCR34_RGAP_CTRL_EN		BIT(4)
+#define MCR34_CKE_OUT_IN_SELF_REF_DIS	BIT(3)
+#define MCR34_FOURCE_SELF_REF_EN	BIT(2)
+#define MCR34_AUTOPWRDN_EN		BIT(1)
+#define MCR34_CKE_EN			BIT(0)
+
+#define MCR38_RW_MAX_GRANT_CNT_RQ_SHIFT	16
+#define MCR38_RW_MAX_GRANT_CNT_RQ_MASK	GENMASK(20, 16)
+
+/* default request queued limitation mask (0xFFBBFFF4) */
+#define MCR3C_DEFAULT_MASK                                                     \
+	~(REQ_PRI_VGA_HW_CURSOR_R | REQ_PRI_VGA_CRT_R | REQ_PRI_PCIE_BUS1_RW | \
+	  REQ_PRI_XDMA1_RW | REQ_PRI_2D_ENGINE_DATA_RW)
+
+#define MCR50_RESET_ALL_INTR		BIT(31)
+#define SDRAM_CONF_ECC_AUTO_SCRUBBING	BIT(9)
+#define SDRAM_CONF_SCRAMBLE		BIT(8)
+#define SDRAM_CONF_ECC_EN		BIT(7)
+#define SDRAM_CONF_DUALX8		BIT(5)
+#define SDRAM_CONF_DDR4			BIT(4)
+#define SDRAM_CONF_VGA_SIZE_SHIFT	2
+#define SDRAM_CONF_VGA_SIZE_MASK	GENMASK(3, 2)
+#define SDRAM_CONF_CAP_SHIFT		0
+#define SDRAM_CONF_CAP_MASK		GENMASK(1, 0)
+
+#define SDRAM_CONF_CAP_256M		0
+#define SDRAM_CONF_CAP_512M		1
+#define SDRAM_CONF_CAP_1024M		2
+#define SDRAM_CONF_CAP_2048M		3
+#define SDRAM_CONF_ECC_SETUP		(SDRAM_CONF_ECC_AUTO_SCRUBBING | SDRAM_CONF_ECC_EN)
+
+#define SDRAM_MISC_DDR4_TREFRESH	(1 << 3)
+
+#define SDRAM_PHYCTRL0_PLL_LOCKED	BIT(4)
+#define SDRAM_PHYCTRL0_NRST		BIT(2)
+#define SDRAM_PHYCTRL0_INIT		BIT(0)
+
+/* MCR0C */
+#define SDRAM_REFRESH_PERIOD_ZQCS_SHIFT	16
+#define SDRAM_REFRESH_PERIOD_ZQCS_MASK	GENMASK(31, 16)
+#define SDRAM_REFRESH_PERIOD_SHIFT	8
+#define SDRAM_REFRESH_PERIOD_MASK	GENMASK(15, 8)
+#define SDRAM_REFRESH_ZQCS_EN		BIT(7)
+#define SDRAM_RESET_DLL_ZQCL_EN		BIT(6)
+#define SDRAM_LOW_PRI_REFRESH_EN	BIT(5)
+#define SDRAM_FORCE_PRECHARGE_EN	BIT(4)
+#define SDRAM_REFRESH_EN		BIT(0)
+
+#define SDRAM_TEST_LEN_SHIFT		4
+#define SDRAM_TEST_LEN_MASK		0xfffff
+#define SDRAM_TEST_START_ADDR_SHIFT	24
+#define SDRAM_TEST_START_ADDR_MASK	0x3f
+
+#define SDRAM_TEST_EN			(1 << 0)
+#define SDRAM_TEST_MODE_SHIFT		1
+#define SDRAM_TEST_MODE_MASK		(0x3 << SDRAM_TEST_MODE_SHIFT)
+#define SDRAM_TEST_MODE_WO		(0x0 << SDRAM_TEST_MODE_SHIFT)
+#define SDRAM_TEST_MODE_RB		(0x1 << SDRAM_TEST_MODE_SHIFT)
+#define SDRAM_TEST_MODE_RW		(0x2 << SDRAM_TEST_MODE_SHIFT)
+
+#define SDRAM_TEST_GEN_MODE_SHIFT	3
+#define SDRAM_TEST_GEN_MODE_MASK	(7 << SDRAM_TEST_GEN_MODE_SHIFT)
+#define SDRAM_TEST_TWO_MODES		(1 << 6)
+#define SDRAM_TEST_ERRSTOP		(1 << 7)
+#define SDRAM_TEST_DONE			(1 << 12)
+#define SDRAM_TEST_FAIL			(1 << 13)
+
+#define SDRAM_AC_TRFC_SHIFT		0
+#define SDRAM_AC_TRFC_MASK		0xff
+
+#define SDRAM_ECC_RANGE_ADDR_MASK	GENMASK(30, 20)
+#define SDRAM_ECC_RANGE_ADDR_SHIFT	20
+
+#ifndef __ASSEMBLY__
+struct ast2600_sdrammc_regs {
+	u32 protection_key;		/* offset 0x00 */
+	u32 config;			/* offset 0x04 */
+	u32 gm_protection_key;		/* offset 0x08 */
+	u32 refresh_timing;		/* offset 0x0C */
+	u32 ac_timing[4];		/* offset 0x10 ~ 0x1C */
+	u32 mr01_mode_setting;		/* offset 0x20 */
+	u32 mr23_mode_setting;		/* offset 0x24 */
+	u32 mr45_mode_setting;		/* offset 0x28 */
+	u32 mr6_mode_setting;		/* offset 0x2C */
+	u32 mode_setting_control;	/* offset 0x30 */
+	u32 power_ctrl;			/* offset 0x34 */
+	u32 arbitration_ctrl;		/* offset 0x38 */
+	u32 req_limit_mask;		/* offset 0x3C */
+	u32 max_grant_len[4];		/* offset 0x40 ~ 0x4C */
+	u32 intr_ctrl;			/* offset 0x50 */
+	u32 ecc_range_ctrl;		/* offset 0x54 */
+	u32 first_ecc_err_addr;		/* offset 0x58 */
+	u32 last_ecc_err_addr;		/* offset 0x5C */
+	u32 phy_ctrl[4];		/* offset 0x60 ~ 0x6C */
+	u32 ecc_test_ctrl;		/* offset 0x70 */
+	u32 test_addr;			/* offset 0x74 */
+	u32 test_fail_dq_bit;		/* offset 0x78 */
+	u32 test_init_val;		/* offset 0x7C */
+	u32 req_input_ctrl;		/* offset 0x80 */
+	u32 req_high_pri_ctrl;		/* offset 0x84 */
+	u32 reserved0[6];		/* offset 0x88 ~ 0x9C */
+};
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* _ASM_ARCH_SDRAM_AST2600_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/timer.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/timer.h
new file mode 100644
index 000000000..ff24e2f86
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/timer.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2016 Google, Inc
+ */
+#ifndef _ASM_ARCH_TIMER_H
+#define _ASM_ARCH_TIMER_H
+
+/* Each timer has 4 control bits in ctrl1 register.
+ * Timer1 uses bits 0:3, Timer2 uses bits 4:7 and so on,
+ * such that timer X uses bits (4 * X - 4):(4 * X - 1)
+ * If the timer does not support PWM, bit 4 is reserved.
+ */
+#define AST_TMC_EN			(1 << 0)
+#define AST_TMC_1MHZ			(1 << 1)
+#define AST_TMC_OVFINTR			(1 << 2)
+#define AST_TMC_PWM			(1 << 3)
+
+/* Timers are counted from 1 in the datasheet. */
+#define AST_TMC_CTRL1_SHIFT(n)			(4 * ((n) - 1))
+
+#define AST_TMC_RATE  (1000*1000)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * All timers share control registers, which makes it harder to make them
+ * separate devices. Since only one timer is needed at the moment, making
+ * it this just one device.
+ */
+
+struct ast_timer_counter {
+	u32 status;
+	u32 reload_val;
+	u32 match1;
+	u32 match2;
+};
+
+struct ast_timer {
+	struct ast_timer_counter timers1[3];
+	u32 ctrl1;
+	u32 ctrl2;
+#ifdef CONFIG_ASPEED_AST2500
+	u32 ctrl3;
+	u32 ctrl1_clr;
+#else
+	u32 reserved[2];
+#endif
+	struct ast_timer_counter timers2[5];
+};
+
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* _ASM_ARCH_TIMER_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/wdt.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/wdt.h
new file mode 100644
index 000000000..fb04d41d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/wdt.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Google, Inc
+ */
+
+#ifndef _ASM_ARCH_WDT_H
+#define _ASM_ARCH_WDT_H
+
+#define WDT_BASE			0x1e785000
+
+/*
+ * Special value that needs to be written to counter_restart register to
+ * (re)start the timer
+ */
+#define WDT_COUNTER_RESTART_VAL		0x4755
+
+/* Control register */
+#define WDT_CTRL_RESET_MODE_SHIFT	5
+#define WDT_CTRL_RESET_MODE_MASK	3
+
+#define WDT_CTRL_EN			(1 << 0)
+#define WDT_CTRL_RESET			(1 << 1)
+#define WDT_CTRL_CLK1MHZ		(1 << 4)
+#define WDT_CTRL_2ND_BOOT		(1 << 7)
+
+/* Values for Reset Mode */
+#define WDT_CTRL_RESET_SOC		0
+#define WDT_CTRL_RESET_CHIP		1
+#define WDT_CTRL_RESET_CPU		2
+#define WDT_CTRL_RESET_MASK		3
+
+/* Reset Mask register */
+#define WDT_RESET_ARM			(1 << 0)
+#define WDT_RESET_COPROC		(1 << 1)
+#define WDT_RESET_SDRAM			(1 << 2)
+#define WDT_RESET_AHB			(1 << 3)
+#define WDT_RESET_I2C			(1 << 4)
+#define WDT_RESET_MAC1			(1 << 5)
+#define WDT_RESET_MAC2			(1 << 6)
+#define WDT_RESET_GCRT			(1 << 7)
+#define WDT_RESET_USB20			(1 << 8)
+#define WDT_RESET_USB11_HOST		(1 << 9)
+#define WDT_RESET_USB11_EHCI2		(1 << 10)
+#define WDT_RESET_VIDEO			(1 << 11)
+#define WDT_RESET_HAC			(1 << 12)
+#define WDT_RESET_LPC			(1 << 13)
+#define WDT_RESET_SDSDIO		(1 << 14)
+#define WDT_RESET_MIC			(1 << 15)
+#define WDT_RESET_CRT2C			(1 << 16)
+#define WDT_RESET_PWM			(1 << 17)
+#define WDT_RESET_PECI			(1 << 18)
+#define WDT_RESET_JTAG			(1 << 19)
+#define WDT_RESET_ADC			(1 << 20)
+#define WDT_RESET_GPIO			(1 << 21)
+#define WDT_RESET_MCTP			(1 << 22)
+#define WDT_RESET_XDMA			(1 << 23)
+#define WDT_RESET_SPI			(1 << 24)
+#define WDT_RESET_MISC			(1 << 25)
+
+#define WDT_RESET_DEFAULT						\
+	(WDT_RESET_ARM | WDT_RESET_COPROC | WDT_RESET_I2C |		\
+	 WDT_RESET_MAC1 | WDT_RESET_MAC2 | WDT_RESET_GCRT |		\
+	 WDT_RESET_USB20 | WDT_RESET_USB11_HOST | WDT_RESET_USB11_EHCI2 | \
+	 WDT_RESET_VIDEO | WDT_RESET_HAC | WDT_RESET_LPC |		\
+	 WDT_RESET_SDSDIO | WDT_RESET_MIC | WDT_RESET_CRT2C |		\
+	 WDT_RESET_PWM | WDT_RESET_PECI | WDT_RESET_JTAG |		\
+	 WDT_RESET_ADC | WDT_RESET_GPIO | WDT_RESET_MISC)
+
+#ifndef __ASSEMBLY__
+struct ast_wdt {
+	u32 counter_status;
+	u32 counter_reload_val;
+	u32 counter_restart;
+	u32 ctrl;
+	u32 timeout_status;
+	u32 clr_timeout_status;
+	u32 reset_width;
+	/* On pre-ast2500 SoCs this register is reserved. */
+	u32 reset_mask;
+};
+
+/**
+ * Given flags parameter passed to wdt_reset or wdt_start uclass functions,
+ * gets Reset Mode value from it.
+ *
+ * @flags: flags parameter passed into wdt_reset or wdt_start
+ * @return Reset Mode value
+ */
+u32 ast_reset_mode_from_flags(ulong flags);
+
+/**
+ * Given flags parameter passed to wdt_reset or wdt_start uclass functions,
+ * gets Reset Mask value from it. Reset Mask is only supported on ast2500
+ *
+ * @flags: flags parameter passed into wdt_reset or wdt_start
+ * @return Reset Mask value
+ */
+u32 ast_reset_mask_from_flags(ulong flags);
+
+/**
+ * Given Reset Mask and Reset Mode values, converts them to flags,
+ * suitable for passing into wdt_start or wdt_reset uclass functions.
+ *
+ * On ast2500 Reset Mask is 25 bits wide and Reset Mode is 2 bits wide, so they
+ * can both be packed into single 32 bits wide value.
+ *
+ * @reset_mode: Reset Mode
+ * @reset_mask: Reset Mask
+ */
+ulong ast_flags_from_reset_mode_mask(u32 reset_mode, u32 reset_mask);
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARCH_WDT_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h b/roms/u-boot/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h
new file mode 100644
index 000000000..96e8ca07e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020 Aspeed Technology Inc.
+ */
+
+#ifndef _ASM_ARCH_WDT_AST2600_H
+#define _ASM_ARCH_WDT_AST2600_H
+
+#define WDT_BASE			0x1e785000
+
+/*
+ * Special value that needs to be written to counter_restart register to
+ * (re)start the timer
+ */
+#define WDT_COUNTER_RESTART_VAL		0x4755
+
+/* reset mode */
+#define WDT_RESET_MODE_SOC		0
+#define WDT_RESET_MODE_CHIP		1
+#define WDT_RESET_MODE_CPU		2
+
+/* bit-fields of WDT control register */
+#define WDT_CTRL_2ND_BOOT		BIT(7)
+#define WDT_CTRL_RESET_MODE_MASK	GENMASK(6, 5)
+#define WDT_CTRL_RESET_MODE_SHIFT	5
+#define WDT_CTRL_CLK1MHZ		BIT(4)
+#define WDT_CTRL_RESET			BIT(1)
+#define WDT_CTRL_EN			BIT(0)
+
+/* bit-fields of WDT reset mask1 register */
+#define WDT_RESET_MASK1_RVAS		BIT(25)
+#define WDT_RESET_MASK1_GPIO1		BIT(24)
+#define WDT_RESET_MASK1_XDMA2		BIT(23)
+#define WDT_RESET_MASK1_XDMA1		BIT(22)
+#define WDT_RESET_MASK1_MCTP2		BIT(21)
+#define WDT_RESET_MASK1_MCTP1		BIT(20)
+#define WDT_RESET_MASK1_JTAG1		BIT(19)
+#define WDT_RESET_MASK1_SD_SDIO1	BIT(18)
+#define WDT_RESET_MASK1_MAC2		BIT(17)
+#define WDT_RESET_MASK1_MAC1		BIT(16)
+#define WDT_RESET_MASK1_GPMCU		BIT(15)
+#define WDT_RESET_MASK1_DPMCU		BIT(14)
+#define WDT_RESET_MASK1_DP		BIT(13)
+#define WDT_RESET_MASK1_HAC		BIT(12)
+#define WDT_RESET_MASK1_VIDEO		BIT(11)
+#define WDT_RESET_MASK1_CRT		BIT(10)
+#define WDT_RESET_MASK1_GCRT		BIT(9)
+#define WDT_RESET_MASK1_USB11_UHCI	BIT(8)
+#define WDT_RESET_MASK1_USB_PORTA	BIT(7)
+#define WDT_RESET_MASK1_USB_PORTB	BIT(6)
+#define WDT_RESET_MASK1_COPROC		BIT(5)
+#define WDT_RESET_MASK1_SOC		BIT(4)
+#define WDT_RESET_MASK1_SLI		BIT(3)
+#define WDT_RESET_MASK1_AHB		BIT(2)
+#define WDT_RESET_MASK1_SDRAM		BIT(1)
+#define WDT_RESET_MASK1_ARM		BIT(0)
+
+/* bit-fields of WDT reset mask2 register */
+#define WDT_RESET_MASK2_ESPI		BIT(26)
+#define WDT_RESET_MASK2_I3C_BUS8	BIT(25)
+#define WDT_RESET_MASK2_I3C_BUS7	BIT(24)
+#define WDT_RESET_MASK2_I3C_BUS6	BIT(23)
+#define WDT_RESET_MASK2_I3C_BUS5	BIT(22)
+#define WDT_RESET_MASK2_I3C_BUS4	BIT(21)
+#define WDT_RESET_MASK2_I3C_BUS3	BIT(20)
+#define WDT_RESET_MASK2_I3C_BUS2	BIT(19)
+#define WDT_RESET_MASK2_I3C_BUS1	BIT(18)
+#define WDT_RESET_MASK2_I3C_GLOBAL	BIT(17)
+#define WDT_RESET_MASK2_I2C		BIT(16)
+#define WDT_RESET_MASK2_FSI		BIT(15)
+#define WDT_RESET_MASK2_ADC		BIT(14)
+#define WDT_RESET_MASK2_PWM		BIT(13)
+#define WDT_RESET_MASK2_PECI		BIT(12)
+#define WDT_RESET_MASK2_LPC		BIT(11)
+#define WDT_RESET_MASK2_MDC_MDIO	BIT(10)
+#define WDT_RESET_MASK2_GPIO2		BIT(9)
+#define WDT_RESET_MASK2_JTAG2		BIT(8)
+#define WDT_RESET_MASK2_SD_SDIO2	BIT(7)
+#define WDT_RESET_MASK2_MAC4		BIT(6)
+#define WDT_RESET_MASK2_MAC3		BIT(5)
+#define WDT_RESET_MASK2_SOC		BIT(4)
+#define WDT_RESET_MASK2_SLI2		BIT(3)
+#define WDT_RESET_MASK2_AHB2		BIT(2)
+#define WDT_RESET_MASK2_SPI1_SPI2	BIT(1)
+#define WDT_RESET_MASK2_ARM		BIT(0)
+
+#define WDT_RESET_MASK1_DEFAULT						\
+	(WDT_RESET_MASK1_RVAS | WDT_RESET_MASK1_GPIO1 |			\
+	 WDT_RESET_MASK1_JTAG1 | WDT_RESET_MASK1_SD_SDIO1 |		\
+	 WDT_RESET_MASK1_MAC2 | WDT_RESET_MASK1_MAC1 |			\
+	 WDT_RESET_MASK1_HAC | WDT_RESET_MASK1_VIDEO |			\
+	 WDT_RESET_MASK1_CRT | WDT_RESET_MASK1_GCRT |			\
+	 WDT_RESET_MASK1_USB11_UHCI | WDT_RESET_MASK1_USB_PORTA	|	\
+	 WDT_RESET_MASK1_USB_PORTB | WDT_RESET_MASK1_COPROC |		\
+	 WDT_RESET_MASK1_SOC | WDT_RESET_MASK1_ARM)
+
+#define WDT_RESET_MASK2_DEFAULT						\
+	(WDT_RESET_MASK2_I3C_BUS8 | WDT_RESET_MASK2_I3C_BUS7 |		\
+	 WDT_RESET_MASK2_I3C_BUS6 | WDT_RESET_MASK2_I3C_BUS5 |		\
+	 WDT_RESET_MASK2_I3C_BUS4 | WDT_RESET_MASK2_I3C_BUS3 |		\
+	 WDT_RESET_MASK2_I3C_BUS2 | WDT_RESET_MASK2_I3C_BUS1 |		\
+	 WDT_RESET_MASK2_I3C_GLOBAL | WDT_RESET_MASK2_I2C |		\
+	 WDT_RESET_MASK2_FSI | WDT_RESET_MASK2_ADC |			\
+	 WDT_RESET_MASK2_PWM | WDT_RESET_MASK2_PECI |			\
+	 WDT_RESET_MASK2_LPC | WDT_RESET_MASK2_MDC_MDIO |		\
+	 WDT_RESET_MASK2_GPIO2 | WDT_RESET_MASK2_JTAG2 |		\
+	 WDT_RESET_MASK2_SD_SDIO2 | WDT_RESET_MASK2_MAC4 |		\
+	 WDT_RESET_MASK2_MAC3 | WDT_RESET_MASK2_SOC |			\
+	 WDT_RESET_MASK2_ARM)
+
+#ifndef __ASSEMBLY__
+struct ast2600_wdt {
+	u32 counter_status;
+	u32 counter_reload_val;
+	u32 counter_restart;
+	u32 ctrl;
+	u32 timeout_status;
+	u32 clr_timeout_status;
+	u32 reset_width;
+	u32 reset_mask1;
+	u32 reset_mask2;
+	u32 sw_reset_ctrl;
+	u32 sw_reset_mask1;
+	u32 sw_reset_mask2;
+	u32 sw_reset_disable;
+};
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARCH_WDT_AST2600_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/boot0.h
new file mode 100644
index 000000000..8cde42b89
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/boot0.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 Broadcom Corporation.
+ */
+
+/* BOOT0 header information */
+_start:
+	ARM_VECTORS
+	.word	0xbabeface
+	.word	_end - _start
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/gpio.h
new file mode 100644
index 000000000..82c12bb70
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/gpio.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#ifndef __ARCH_BCM235XX_GPIO_H
+#define __ARCH_BCM235XX_GPIO_H
+
+/*
+ * Empty file - cmd_gpio.c requires this. The implementation
+ * is in drivers/gpio/kona_gpio.c instead of inlined here.
+ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/sysmap.h b/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/sysmap.h
new file mode 100644
index 000000000..ff6debc67
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcm235xx/sysmap.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#ifndef __ARCH_BCM235XX_SYSMAP_H
+
+#define BSC1_BASE_ADDR		0x3e016000
+#define BSC2_BASE_ADDR		0x3e017000
+#define BSC3_BASE_ADDR		0x3e018000
+#define GPIO2_BASE_ADDR		0x35003000
+#define HSOTG_BASE_ADDR		0x3f120000
+#define HSOTG_CTRL_BASE_ADDR	0x3f130000
+#define KONA_MST_CLK_BASE_ADDR	0x3f001000
+#define KONA_SLV_CLK_BASE_ADDR	0x3e011000
+#define PMU_BSC_BASE_ADDR	0x3500d000
+#define SDIO1_BASE_ADDR		0x3f180000
+#define SDIO2_BASE_ADDR		0x3f190000
+#define SDIO3_BASE_ADDR		0x3f1a0000
+#define SDIO4_BASE_ADDR		0x3f1b0000
+#define TIMER_BASE_ADDR		0x3e00d000
+
+#define HSOTG_DCTL_OFFSET					0x00000804
+#define    HSOTG_DCTL_SFTDISCON_MASK				0x00000002
+
+#define HSOTG_CTRL_PHY_P1CTL_OFFSET				0x00000008
+#define    HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK			0x00000002
+#define    HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK		0x00000001
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/boot0.h
new file mode 100644
index 000000000..8cde42b89
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/boot0.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 Broadcom Corporation.
+ */
+
+/* BOOT0 header information */
+_start:
+	ARM_VECTORS
+	.word	0xbabeface
+	.word	_end - _start
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/gpio.h
new file mode 100644
index 000000000..6716e1a15
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/gpio.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#ifndef __ARCH_BCM281XX_GPIO_H
+#define __ARCH_BCM281XX_GPIO_H
+
+/*
+ * Empty file - cmd_gpio.c requires this. The implementation
+ * is in drivers/gpio/kona_gpio.c instead of inlined here.
+ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h b/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h
new file mode 100644
index 000000000..477b69388
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#ifndef __ARCH_BCM281XX_SYSMAP_H
+
+#define BSC1_BASE_ADDR		0x3e016000
+#define BSC2_BASE_ADDR		0x3e017000
+#define BSC3_BASE_ADDR		0x3e018000
+#define DWDMA_AHB_BASE_ADDR	0x38100000
+#define ESUB_CLK_BASE_ADDR	0x38000000
+#define ESW_CONTRL_BASE_ADDR	0x38200000
+#define GPIO2_BASE_ADDR		0x35003000
+#define HSOTG_BASE_ADDR		0x3f120000
+#define HSOTG_CTRL_BASE_ADDR	0x3f130000
+#define KONA_MST_CLK_BASE_ADDR	0x3f001000
+#define KONA_SLV_CLK_BASE_ADDR	0x3e011000
+#define PMU_BSC_BASE_ADDR	0x3500d000
+#define PWRMGR_BASE_ADDR	0x35010000
+#define SDIO1_BASE_ADDR		0x3f180000
+#define SDIO2_BASE_ADDR		0x3f190000
+#define SDIO3_BASE_ADDR		0x3f1a0000
+#define SDIO4_BASE_ADDR		0x3f1b0000
+#define SECWD_BASE_ADDR		0x3500c000
+#define SECWD2_BASE_ADDR	0x35002f40
+#define TIMER_BASE_ADDR		0x3e00d000
+
+#define HSOTG_DCTL_OFFSET					0x00000804
+#define    HSOTG_DCTL_SFTDISCON_MASK				0x00000002
+
+#define HSOTG_CTRL_PHY_P1CTL_OFFSET				0x00000008
+#define    HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK			0x00000002
+#define    HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK		0x00000001
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcmcygnus/configs.h b/roms/u-boot/arch/arm/include/asm/arch-bcmcygnus/configs.h
new file mode 100644
index 000000000..bf05cb3a7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcmcygnus/configs.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014-2017 Broadcom.
+ */
+
+#ifndef __ARCH_CONFIGS_H
+#define __ARCH_CONFIGS_H
+
+#include <asm/iproc-common/configs.h>
+
+/* uArchitecture specifics */
+
+/* Serial Info */
+/* Post pad 3 bytes after each reg addr */
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_MEM32
+
+#define CONFIG_SYS_NS16550_CLK		100000000
+#define CONFIG_SYS_NS16550_CLK_DIV	54
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_SYS_NS16550_COM3		0x18023000
+
+/* Ethernet */
+#define CONFIG_PHY_RESET_DELAY 10000 /* PHY reset delay in us*/
+
+#endif /* __ARCH_CONFIGS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcmns3/bl33_info.h b/roms/u-boot/arch/arm/include/asm/arch-bcmns3/bl33_info.h
new file mode 100644
index 000000000..bbc95b018
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcmns3/bl33_info.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 Broadcom.
+ *
+ */
+
+#ifndef BL33_INFO_H
+#define BL33_INFO_H
+#include <asm/io.h>
+
+/* Increase version number each time this file is modified */
+#define BL33_INFO_VERSION	1
+
+struct chip_info {
+	unsigned int chip_id;
+	unsigned int rev_id;
+};
+
+struct bl33_info {
+	unsigned int version;
+	struct chip_info chip;
+};
+
+extern struct bl33_info *bl33_info;
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-bcmnsp/configs.h b/roms/u-boot/arch/arm/include/asm/arch-bcmnsp/configs.h
new file mode 100644
index 000000000..05fa9b961
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-bcmnsp/configs.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#ifndef __ARCH_CONFIGS_H
+#define __ARCH_CONFIGS_H
+
+#include <asm/iproc-common/configs.h>
+
+/* uArchitecture specifics */
+
+/* Serial Info */
+/* no padding */
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+
+#define CONFIG_SYS_NS16550_CLK		0x03b9aca0
+#define CONFIG_SYS_NS16550_COM1		0x18000300
+
+#endif /* __ARCH_CONFIGS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ep93xx/ep93xx.h b/roms/u-boot/arch/arm/include/asm/arch-ep93xx/ep93xx.h
new file mode 100644
index 000000000..272b64480
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ep93xx/ep93xx.h
@@ -0,0 +1,666 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Cirrus Logic EP93xx register definitions.
+ *
+ * Copyright (C) 2013
+ * Sergey Kostanbaev <sergey.kostanbaev <at> fairwaves.ru>
+ *
+ * Copyright (C) 2009
+ * Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2006
+ * Dominic Rath <Dominic.Rath@gmx.de>
+ *
+ * Copyright (C) 2004, 2005
+ * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
+ *
+ * Based in large part on linux/include/asm-arm/arch-ep93xx/regmap.h, which is
+ *
+ * Copyright (C) 2004 Ray Lehtiniemi
+ * Copyright (C) 2003 Cirrus Logic, Inc
+ * Copyright (C) 1999 ARM Limited.
+ */
+
+#define EP93XX_AHB_BASE			0x80000000
+#define EP93XX_APB_BASE			0x80800000
+
+/*
+ * 0x80000000 - 0x8000FFFF: DMA
+ */
+#define DMA_OFFSET			0x000000
+#define DMA_BASE			(EP93XX_AHB_BASE | DMA_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct dma_channel {
+	uint32_t control;
+	uint32_t interrupt;
+	uint32_t ppalloc;
+	uint32_t status;
+	uint32_t reserved0;
+	uint32_t remain;
+	uint32_t reserved1[2];
+	uint32_t maxcnt0;
+	uint32_t base0;
+	uint32_t current0;
+	uint32_t reserved2;
+	uint32_t maxcnt1;
+	uint32_t base1;
+	uint32_t current1;
+	uint32_t reserved3;
+};
+
+struct dma_regs {
+	struct dma_channel m2p_channel_0;
+	struct dma_channel m2p_channel_1;
+	struct dma_channel m2p_channel_2;
+	struct dma_channel m2p_channel_3;
+	struct dma_channel m2m_channel_0;
+	struct dma_channel m2m_channel_1;
+	struct dma_channel reserved0[2];
+	struct dma_channel m2p_channel_5;
+	struct dma_channel m2p_channel_4;
+	struct dma_channel m2p_channel_7;
+	struct dma_channel m2p_channel_6;
+	struct dma_channel m2p_channel_9;
+	struct dma_channel m2p_channel_8;
+	uint32_t channel_arbitration;
+	uint32_t reserved[15];
+	uint32_t global_interrupt;
+};
+#endif
+
+/*
+ * 0x80010000 - 0x8001FFFF: Ethernet MAC
+ */
+#define MAC_OFFSET			0x010000
+#define MAC_BASE			(EP93XX_AHB_BASE | MAC_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct mac_queue {
+	uint32_t badd;
+	union { /* deal with half-word aligned registers */
+		uint32_t blen;
+		union {
+			uint16_t filler;
+			uint16_t curlen;
+		};
+	};
+	uint32_t curadd;
+};
+
+struct mac_regs {
+	uint32_t rxctl;
+	uint32_t txctl;
+	uint32_t testctl;
+	uint32_t reserved0;
+	uint32_t miicmd;
+	uint32_t miidata;
+	uint32_t miists;
+	uint32_t reserved1;
+	uint32_t selfctl;
+	uint32_t inten;
+	uint32_t intstsp;
+	uint32_t intstsc;
+	uint32_t reserved2[2];
+	uint32_t diagad;
+	uint32_t diagdata;
+	uint32_t gt;
+	uint32_t fct;
+	uint32_t fcf;
+	uint32_t afp;
+	union {
+		struct {
+			uint32_t indad;
+			uint32_t indad_upper;
+		};
+		uint32_t hashtbl;
+	};
+	uint32_t reserved3[2];
+	uint32_t giintsts;
+	uint32_t giintmsk;
+	uint32_t giintrosts;
+	uint32_t giintfrc;
+	uint32_t txcollcnt;
+	uint32_t rxmissnct;
+	uint32_t rxruntcnt;
+	uint32_t reserved4;
+	uint32_t bmctl;
+	uint32_t bmsts;
+	uint32_t rxbca;
+	uint32_t reserved5;
+	struct mac_queue rxdq;
+	uint32_t rxdqenq;
+	struct mac_queue rxstsq;
+	uint32_t rxstsqenq;
+	struct mac_queue txdq;
+	uint32_t txdqenq;
+	struct mac_queue txstsq;
+	uint32_t reserved6;
+	uint32_t rxbufthrshld;
+	uint32_t txbufthrshld;
+	uint32_t rxststhrshld;
+	uint32_t txststhrshld;
+	uint32_t rxdthrshld;
+	uint32_t txdthrshld;
+	uint32_t maxfrmlen;
+	uint32_t maxhdrlen;
+};
+#endif
+
+#define SELFCTL_RWP		(1 << 7)
+#define SELFCTL_GPO0		(1 << 5)
+#define SELFCTL_PUWE		(1 << 4)
+#define SELFCTL_PDWE		(1 << 3)
+#define SELFCTL_MIIL		(1 << 2)
+#define SELFCTL_RESET		(1 << 0)
+
+#define INTSTS_RWI		(1 << 30)
+#define INTSTS_RXMI		(1 << 29)
+#define INTSTS_RXBI		(1 << 28)
+#define INTSTS_RXSQI		(1 << 27)
+#define INTSTS_TXLEI		(1 << 26)
+#define INTSTS_ECIE		(1 << 25)
+#define INTSTS_TXUHI		(1 << 24)
+#define INTSTS_MOI		(1 << 18)
+#define INTSTS_TXCOI		(1 << 17)
+#define INTSTS_RXROI		(1 << 16)
+#define INTSTS_MIII		(1 << 12)
+#define INTSTS_PHYI		(1 << 11)
+#define INTSTS_TI		(1 << 10)
+#define INTSTS_AHBE		(1 << 8)
+#define INTSTS_OTHER		(1 << 4)
+#define INTSTS_TXSQ		(1 << 3)
+#define INTSTS_RXSQ		(1 << 2)
+
+#define BMCTL_MT		(1 << 13)
+#define BMCTL_TT		(1 << 12)
+#define BMCTL_UNH		(1 << 11)
+#define BMCTL_TXCHR		(1 << 10)
+#define BMCTL_TXDIS		(1 << 9)
+#define BMCTL_TXEN		(1 << 8)
+#define BMCTL_EH2		(1 << 6)
+#define BMCTL_EH1		(1 << 5)
+#define BMCTL_EEOB		(1 << 4)
+#define BMCTL_RXCHR		(1 << 2)
+#define BMCTL_RXDIS		(1 << 1)
+#define BMCTL_RXEN		(1 << 0)
+
+#define BMSTS_TXACT		(1 << 7)
+#define BMSTS_TP		(1 << 4)
+#define BMSTS_RXACT		(1 << 3)
+#define BMSTS_QID_MASK		0x07
+#define BMSTS_QID_RXDATA	0x00
+#define BMSTS_QID_TXDATA	0x01
+#define BMSTS_QID_RXSTS		0x02
+#define BMSTS_QID_TXSTS		0x03
+#define BMSTS_QID_RXDESC	0x04
+#define BMSTS_QID_TXDESC	0x05
+
+#define AFP_MASK		0x07
+#define AFP_IAPRIMARY		0x00
+#define AFP_IASECONDARY1	0x01
+#define AFP_IASECONDARY2	0x02
+#define AFP_IASECONDARY3	0x03
+#define AFP_TX			0x06
+#define AFP_HASH		0x07
+
+#define RXCTL_PAUSEA		(1 << 20)
+#define RXCTL_RXFCE1		(1 << 19)
+#define RXCTL_RXFCE0		(1 << 18)
+#define RXCTL_BCRC		(1 << 17)
+#define RXCTL_SRXON		(1 << 16)
+#define RXCTL_RCRCA		(1 << 13)
+#define RXCTL_RA		(1 << 12)
+#define RXCTL_PA		(1 << 11)
+#define RXCTL_BA		(1 << 10)
+#define RXCTL_MA		(1 << 9)
+#define RXCTL_IAHA		(1 << 8)
+#define RXCTL_IA3		(1 << 3)
+#define RXCTL_IA2		(1 << 2)
+#define RXCTL_IA1		(1 << 1)
+#define RXCTL_IA0		(1 << 0)
+
+#define TXCTL_DEFDIS		(1 << 7)
+#define TXCTL_MBE		(1 << 6)
+#define TXCTL_ICRC		(1 << 5)
+#define TXCTL_TPD		(1 << 4)
+#define TXCTL_OCOLL		(1 << 3)
+#define TXCTL_SP		(1 << 2)
+#define TXCTL_PB		(1 << 1)
+#define TXCTL_STXON		(1 << 0)
+
+#define MIICMD_REGAD_MASK	(0x001F)
+#define MIICMD_PHYAD_MASK	(0x03E0)
+#define MIICMD_OPCODE_MASK	(0xC000)
+#define MIICMD_PHYAD_8950	(0x0000)
+#define MIICMD_OPCODE_READ	(0x8000)
+#define MIICMD_OPCODE_WRITE	(0x4000)
+
+#define MIISTS_BUSY		(1 << 0)
+
+/*
+ * 0x80020000 - 0x8002FFFF: USB OHCI
+ */
+#define USB_OFFSET			0x020000
+#define USB_BASE			(EP93XX_AHB_BASE | USB_OFFSET)
+
+/*
+ * 0x80030000 - 0x8003FFFF: Raster engine
+ */
+#if (defined(CONFIG_EP9307) || defined(CONFIG_EP9312) || defined(CONFIG_EP9315))
+#define RASTER_OFFSET			0x030000
+#define RASTER_BASE			(EP93XX_AHB_BASE | RASTER_OFFSET)
+#endif
+
+/*
+ * 0x80040000 - 0x8004FFFF: Graphics accelerator
+ */
+#if defined(CONFIG_EP9315)
+#define GFX_OFFSET			0x040000
+#define GFX_BASE			(EP93XX_AHB_BASE | GFX_OFFSET)
+#endif
+
+/*
+ * 0x80050000 - 0x8005FFFF: Reserved
+ */
+
+/*
+ * 0x80060000 - 0x8006FFFF: SDRAM controller
+ */
+#define SDRAM_OFFSET			0x060000
+#define SDRAM_BASE			(EP93XX_AHB_BASE | SDRAM_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct sdram_regs {
+	uint32_t reserved;
+	uint32_t glconfig;
+	uint32_t refrshtimr;
+	uint32_t bootsts;
+	uint32_t devcfg0;
+	uint32_t devcfg1;
+	uint32_t devcfg2;
+	uint32_t devcfg3;
+};
+#endif
+
+#define SDRAM_DEVCFG_EXTBUSWIDTH	(1 << 2)
+#define SDRAM_DEVCFG_BANKCOUNT		(1 << 3)
+#define SDRAM_DEVCFG_SROMLL		(1 << 5)
+#define SDRAM_DEVCFG_CASLAT_2		0x00010000
+#define SDRAM_DEVCFG_RASTOCAS_2		0x00200000
+
+#define SDRAM_OFF_GLCONFIG		0x0004
+#define SDRAM_OFF_REFRSHTIMR		0x0008
+
+#define SDRAM_OFF_DEVCFG0		0x0010
+#define SDRAM_OFF_DEVCFG1		0x0014
+#define SDRAM_OFF_DEVCFG2		0x0018
+#define SDRAM_OFF_DEVCFG3		0x001C
+
+#define SDRAM_DEVCFG0_BASE		0xC0000000
+#define SDRAM_DEVCFG1_BASE		0xD0000000
+#define SDRAM_DEVCFG2_BASE		0xE0000000
+#define SDRAM_DEVCFG3_ASD0_BASE		0xF0000000
+#define SDRAM_DEVCFG3_ASD1_BASE		0x00000000
+
+#define GLCONFIG_INIT			(1 << 0)
+#define GLCONFIG_MRS			(1 << 1)
+#define GLCONFIG_SMEMBUSY		(1 << 5)
+#define GLCONFIG_LCR			(1 << 6)
+#define GLCONFIG_REARBEN		(1 << 7)
+#define GLCONFIG_CLKSHUTDOWN		(1 << 30)
+#define GLCONFIG_CKE			(1 << 31)
+
+#define EP93XX_SDRAMCTRL			0x80060000
+#define EP93XX_SDRAMCTRL_GLOBALCFG_INIT		0x00000001
+#define EP93XX_SDRAMCTRL_GLOBALCFG_MRS		0x00000002
+#define EP93XX_SDRAMCTRL_GLOBALCFG_SMEMBUSY	0x00000020
+#define EP93XX_SDRAMCTRL_GLOBALCFG_LCR		0x00000040
+#define EP93XX_SDRAMCTRL_GLOBALCFG_REARBEN	0x00000080
+#define EP93XX_SDRAMCTRL_GLOBALCFG_CLKSHUTDOWN	0x40000000
+#define EP93XX_SDRAMCTRL_GLOBALCFG_CKE		0x80000000
+
+#define EP93XX_SDRAMCTRL_REFRESH_MASK		0x0000FFFF
+
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_32	0x00000002
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_16	0x00000001
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_8	0x00000000
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_MASK	0x00000003
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_MEDIA	0x00000004
+
+#define EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH	0x00000004
+#define EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT	0x00000008
+#define EP93XX_SDRAMCTRL_DEVCFG_SROM512		0x00000010
+#define EP93XX_SDRAMCTRL_DEVCFG_SROMLL		0x00000020
+#define EP93XX_SDRAMCTRL_DEVCFG_2KPAGE		0x00000040
+#define EP93XX_SDRAMCTRL_DEVCFG_SFCONFIGADDR	0x00000080
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_MASK	0x00070000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2	0x00010000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_3	0x00020000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_4	0x00030000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_5	0x00040000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_6	0x00050000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_7	0x00060000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_8	0x00070000
+#define EP93XX_SDRAMCTRL_DEVCFG_WBL		0x00080000
+#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_MASK	0x00300000
+#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2	0x00200000
+#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_3	0x00300000
+#define EP93XX_SDRAMCTRL_DEVCFG_AUTOPRECHARGE	0x01000000
+
+/*
+ * 0x80070000 - 0x8007FFFF: Reserved
+ */
+
+/*
+ * 0x80080000 - 0x8008FFFF: SRAM controller & PCMCIA
+ */
+#define SMC_OFFSET			0x080000
+#define SMC_BASE			(EP93XX_AHB_BASE | SMC_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct smc_regs {
+	uint32_t bcr0;
+	uint32_t bcr1;
+	uint32_t bcr2;
+	uint32_t bcr3;
+	uint32_t reserved0[2];
+	uint32_t bcr6;
+	uint32_t bcr7;
+#if defined(CONFIG_EP9315)
+	uint32_t pcattribute;
+	uint32_t pccommon;
+	uint32_t pcio;
+	uint32_t reserved1[5];
+	uint32_t pcmciactrl;
+#endif
+};
+#endif
+
+#define EP93XX_OFF_SMCBCR0		0x00
+#define EP93XX_OFF_SMCBCR1		0x04
+#define EP93XX_OFF_SMCBCR2		0x08
+#define EP93XX_OFF_SMCBCR3		0x0C
+#define EP93XX_OFF_SMCBCR6		0x18
+#define EP93XX_OFF_SMCBCR7		0x1C
+
+#define SMC_BCR_IDCY_SHIFT	0
+#define SMC_BCR_WST1_SHIFT	5
+#define SMC_BCR_BLE		(1 << 10)
+#define SMC_BCR_WST2_SHIFT	11
+#define SMC_BCR_MW_SHIFT	28
+
+/*
+ * 0x80090000 - 0x8009FFFF: Boot ROM
+ */
+
+/*
+ * 0x800A0000 - 0x800AFFFF: IDE interface
+ */
+
+/*
+ * 0x800B0000 - 0x800BFFFF: VIC1
+ */
+
+/*
+ * 0x800C0000 - 0x800CFFFF: VIC2
+ */
+
+/*
+ * 0x800D0000 - 0x800FFFFF: Reserved
+ */
+
+/*
+ * 0x80800000 - 0x8080FFFF: Reserved
+ */
+
+/*
+ * 0x80810000 - 0x8081FFFF: Timers
+ */
+#define TIMER_OFFSET		0x010000
+#define TIMER_BASE		(EP93XX_APB_BASE | TIMER_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct timer {
+	uint32_t load;
+	uint32_t value;
+	uint32_t control;
+	uint32_t clear;
+};
+
+struct timer4 {
+	uint32_t value_low;
+	uint32_t value_high;
+};
+
+struct timer_regs {
+	struct timer timer1;
+	uint32_t reserved0[4];
+	struct timer timer2;
+	uint32_t reserved1[12];
+	struct timer4 timer4;
+	uint32_t reserved2[6];
+	struct timer timer3;
+};
+#endif
+
+/*
+ * 0x80820000 - 0x8082FFFF: I2S
+ */
+#define I2S_OFFSET		0x020000
+#define I2S_BASE		(EP93XX_APB_BASE | I2S_OFFSET)
+
+/*
+ * 0x80830000 - 0x8083FFFF: Security
+ */
+#define SECURITY_OFFSET		0x030000
+#define SECURITY_BASE		(EP93XX_APB_BASE | SECURITY_OFFSET)
+
+#define EXTENSIONID		(SECURITY_BASE + 0x2714)
+
+/*
+ * 0x80840000 - 0x8084FFFF: GPIO
+ */
+#define GPIO_OFFSET		0x040000
+#define GPIO_BASE		(EP93XX_APB_BASE | GPIO_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct gpio_int {
+	uint32_t inttype1;
+	uint32_t inttype2;
+	uint32_t eoi;
+	uint32_t inten;
+	uint32_t intsts;
+	uint32_t rawintsts;
+	uint32_t db;
+};
+
+struct gpio_regs {
+	uint32_t padr;
+	uint32_t pbdr;
+	uint32_t pcdr;
+	uint32_t pddr;
+	uint32_t paddr;
+	uint32_t pbddr;
+	uint32_t pcddr;
+	uint32_t pdddr;
+	uint32_t pedr;
+	uint32_t peddr;
+	uint32_t reserved0[2];
+	uint32_t pfdr;
+	uint32_t pfddr;
+	uint32_t pgdr;
+	uint32_t pgddr;
+	uint32_t phdr;
+	uint32_t phddr;
+	uint32_t reserved1;
+	uint32_t finttype1;
+	uint32_t finttype2;
+	uint32_t reserved2;
+	struct gpio_int pfint;
+	uint32_t reserved3[10];
+	struct gpio_int paint;
+	struct gpio_int pbint;
+	uint32_t eedrive;
+};
+#endif
+
+#define EP93XX_LED_DATA		0x80840020
+#define EP93XX_LED_GREEN_ON	0x0001
+#define EP93XX_LED_RED_ON	0x0002
+
+#define EP93XX_LED_DDR		0x80840024
+#define EP93XX_LED_GREEN_ENABLE	0x0001
+#define EP93XX_LED_RED_ENABLE	0x00020000
+
+/*
+ * 0x80850000 - 0x8087FFFF: Reserved
+ */
+
+/*
+ * 0x80880000 - 0x8088FFFF: AAC
+ */
+#define AAC_OFFSET		0x080000
+#define AAC_BASE		(EP93XX_APB_BASE | AAC_OFFSET)
+
+/*
+ * 0x80890000 - 0x8089FFFF: Reserved
+ */
+
+/*
+ * 0x808A0000 - 0x808AFFFF: SPI
+ */
+#define SPI_OFFSET		0x0A0000
+#define SPI_BASE		(EP93XX_APB_BASE | SPI_OFFSET)
+
+/*
+ * 0x808B0000 - 0x808BFFFF: IrDA
+ */
+#define IRDA_OFFSET		0x0B0000
+#define IRDA_BASE		(EP93XX_APB_BASE | IRDA_OFFSET)
+
+/*
+ * 0x808C0000 - 0x808CFFFF: UART1
+ */
+#define UART1_OFFSET		0x0C0000
+#define UART1_BASE		(EP93XX_APB_BASE | UART1_OFFSET)
+
+/*
+ * 0x808D0000 - 0x808DFFFF: UART2
+ */
+#define UART2_OFFSET		0x0D0000
+#define UART2_BASE		(EP93XX_APB_BASE | UART2_OFFSET)
+
+/*
+ * 0x808E0000 - 0x808EFFFF: UART3
+ */
+#define UART3_OFFSET		0x0E0000
+#define UART3_BASE		(EP93XX_APB_BASE | UART3_OFFSET)
+
+/*
+ * 0x808F0000 - 0x808FFFFF: Key Matrix
+ */
+#define KEY_OFFSET		0x0F0000
+#define KEY_BASE		(EP93XX_APB_BASE | KEY_OFFSET)
+
+/*
+ * 0x80900000 - 0x8090FFFF: Touchscreen
+ */
+#define TOUCH_OFFSET		0x900000
+#define TOUCH_BASE		(EP93XX_APB_BASE | TOUCH_OFFSET)
+
+/*
+ * 0x80910000 - 0x8091FFFF: Pulse Width Modulation
+ */
+#define PWM_OFFSET		0x910000
+#define PWM_BASE		(EP93XX_APB_BASE | PWM_OFFSET)
+
+/*
+ * 0x80920000 - 0x8092FFFF: Real time clock
+ */
+#define RTC_OFFSET		0x920000
+#define RTC_BASE		(EP93XX_APB_BASE | RTC_OFFSET)
+
+/*
+ * 0x80930000 - 0x8093FFFF: Syscon
+ */
+#define SYSCON_OFFSET		0x930000
+#define SYSCON_BASE		(EP93XX_APB_BASE | SYSCON_OFFSET)
+
+/* Security */
+#define SECURITY_EXTENSIONID	0x80832714
+
+#ifndef __ASSEMBLY__
+struct syscon_regs {
+	uint32_t pwrsts;
+	uint32_t pwrcnt;
+	uint32_t halt;
+	uint32_t stby;
+	uint32_t reserved0[2];
+	uint32_t teoi;
+	uint32_t stfclr;
+	uint32_t clkset1;
+	uint32_t clkset2;
+	uint32_t reserved1[6];
+	uint32_t scratch0;
+	uint32_t scratch1;
+	uint32_t reserved2[2];
+	uint32_t apbwait;
+	uint32_t bustmstrarb;
+	uint32_t bootmodeclr;
+	uint32_t reserved3[9];
+	uint32_t devicecfg;
+	uint32_t vidclkdiv;
+	uint32_t mirclkdiv;
+	uint32_t i2sclkdiv;
+	uint32_t keytchclkdiv;
+	uint32_t chipid;
+	uint32_t reserved4;
+	uint32_t syscfg;
+	uint32_t reserved5[8];
+	uint32_t sysswlock;
+};
+#else
+#define SYSCON_SCRATCH0		(SYSCON_BASE + 0x0040)
+#endif
+
+#define SYSCON_OFF_CLKSET1			0x0020
+#define SYSCON_OFF_SYSCFG			0x009c
+
+#define SYSCON_PWRCNT_UART_BAUD			(1 << 29)
+#define SYSCON_PWRCNT_USH_EN			(1 << 28)
+
+#define SYSCON_CLKSET_PLL_X2IPD_SHIFT		0
+#define SYSCON_CLKSET_PLL_X2FBD2_SHIFT		5
+#define SYSCON_CLKSET_PLL_X1FBD1_SHIFT		11
+#define SYSCON_CLKSET_PLL_PS_SHIFT		16
+#define SYSCON_CLKSET1_PCLK_DIV_SHIFT		18
+#define SYSCON_CLKSET1_HCLK_DIV_SHIFT		20
+#define SYSCON_CLKSET1_NBYP1			(1 << 23)
+#define SYSCON_CLKSET1_FCLK_DIV_SHIFT		25
+
+#define SYSCON_CLKSET2_PLL2_EN			(1 << 18)
+#define SYSCON_CLKSET2_NBYP2			(1 << 19)
+#define SYSCON_CLKSET2_USB_DIV_SHIFT		28
+
+#define SYSCON_CHIPID_REV_MASK			0xF0000000
+#define SYSCON_DEVICECFG_SWRST			(1 << 31)
+
+#define SYSCON_SYSCFG_LASDO			0x00000020
+
+/*
+ * 0x80930000 - 0x8093FFFF: Watchdog Timer
+ */
+#define WATCHDOG_OFFSET		0x940000
+#define WATCHDOG_BASE		(EP93XX_APB_BASE | WATCHDOG_OFFSET)
+
+/*
+ * 0x80950000 - 0x9000FFFF: Reserved
+ */
+
+/*
+ * During low_level init we store memory layout in memory at specific location
+ */
+#define UBOOT_MEMORYCNF_BANK_SIZE		0x2000
+#define UBOOT_MEMORYCNF_BANK_MASK		0x2004
+#define UBOOT_MEMORYCNF_BANK_COUNT		0x2008
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/clock.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/clock.h
new file mode 100644
index 000000000..d56169143
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/clock.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP Semiconductors
+ *
+ */
+
+#ifndef __ASM_ARCH_FSL_LAYERSCAPE_CLOCK_H_
+#define __ASM_ARCH_FSL_LAYERSCAPE_CLOCK_H_
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_BUS_CLK,
+	MXC_UART_CLK,
+	MXC_I2C_CLK,
+	MXC_DSPI_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+ulong get_ddr_freq(ulong);
+uint get_svr(void);
+
+#endif /* __ASM_ARCH_FSL_LAYERSCAPE_CLOCK_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/config.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/config.h
new file mode 100644
index 000000000..da7ca0587
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -0,0 +1,409 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016-2018, 2020 NXP
+ * Copyright 2015, Freescale Semiconductor
+ */
+
+#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_
+#define _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_
+
+#include <linux/kconfig.h>
+#include <fsl_ddrc_version.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define CONFIG_STANDALONE_LOAD_ADDR	0x80300000
+
+/*
+ * Reserve secure memory
+ * To be aligned with MMU block size
+ */
+#define CONFIG_SYS_MEM_RESERVE_SECURE	(66 * 1024 * 1024)	/* 66MB */
+#define SPL_TLB_SETBACK	0x1000000	/* 16MB under effective memory top */
+
+#ifdef CONFIG_ARCH_LS2080A
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 4, 4 }
+#define	SRDS_MAX_LANES	8
+#define CONFIG_SYS_PAGE_SIZE		0x10000
+#ifndef L1_CACHE_BYTES
+#define L1_CACHE_SHIFT		6
+#define L1_CACHE_BYTES		BIT(L1_CACHE_SHIFT)
+#endif
+
+#define CONFIG_SYS_FSL_OCRAM_BASE	0x18000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE	0x00200000 /* 2M space */
+#define CONFIG_SYS_FSL_OCRAM_SIZE	0x00020000 /* Real size 128K */
+
+/* DDR */
+#define CONFIG_SYS_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define CONFIG_SYS_FSL_ESDHC_LE
+#define CONFIG_SYS_FSL_IFC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
+
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE			0x06000000
+#define GICR_BASE			0x06100000
+
+/* SMMU Defintions */
+#define SMMU_BASE			0x05000000 /* GR0 Base */
+
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+
+/* Cache Coherent Interconnect */
+#define CCI_MN_BASE			0x04000000
+#define CCI_MN_RNF_NODEID_LIST		0x180
+#define CCI_MN_DVM_DOMAIN_CTL		0x200
+#define CCI_MN_DVM_DOMAIN_CTL_SET	0x210
+
+#define CCI_HN_F_0_BASE			(CCI_MN_BASE + 0x200000)
+#define CCI_HN_F_1_BASE			(CCI_MN_BASE + 0x210000)
+#define CCN_HN_F_SAM_CTL		0x8	/* offset on base HN_F base */
+#define CCN_HN_F_SAM_NODEID_MASK	0x7f
+#define CCN_HN_F_SAM_NODEID_DDR0	0x4
+#define CCN_HN_F_SAM_NODEID_DDR1	0xe
+
+#define CCI_RN_I_0_BASE			(CCI_MN_BASE + 0x800000)
+#define CCI_RN_I_2_BASE			(CCI_MN_BASE + 0x820000)
+#define CCI_RN_I_6_BASE			(CCI_MN_BASE + 0x860000)
+#define CCI_RN_I_12_BASE		(CCI_MN_BASE + 0x8C0000)
+#define CCI_RN_I_16_BASE		(CCI_MN_BASE + 0x900000)
+#define CCI_RN_I_20_BASE		(CCI_MN_BASE + 0x940000)
+
+#define CCI_S0_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x10)
+#define CCI_S1_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x110)
+#define CCI_S2_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x210)
+
+#define CCI_AUX_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x0500)
+
+/* TZ Protection Controller Definitions */
+#define TZPC_BASE				0x02200000
+#define TZPCR0SIZE_BASE				(TZPC_BASE)
+#define TZPCDECPROT_0_STAT_BASE			(TZPC_BASE + 0x800)
+#define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
+#define TZPCDECPROT_0_CLR_BASE			(TZPC_BASE + 0x808)
+#define TZPCDECPROT_1_STAT_BASE			(TZPC_BASE + 0x80C)
+#define TZPCDECPROT_1_SET_BASE			(TZPC_BASE + 0x810)
+#define TZPCDECPROT_1_CLR_BASE			(TZPC_BASE + 0x814)
+#define TZPCDECPROT_2_STAT_BASE			(TZPC_BASE + 0x818)
+#define TZPCDECPROT_2_SET_BASE			(TZPC_BASE + 0x81C)
+#define TZPCDECPROT_2_CLR_BASE			(TZPC_BASE + 0x820)
+
+#define DCSR_CGACRE5		0x700070914ULL
+#define EPU_EPCMPR5		0x700060914ULL
+#define EPU_EPCCR5		0x700060814ULL
+#define EPU_EPSMCR5		0x700060228ULL
+#define EPU_EPECR5		0x700060314ULL
+#define EPU_EPCTR5		0x700060a14ULL
+#define EPU_EPGCR		0x700060000ULL
+
+#define CONFIG_SYS_FSL_ERRATUM_A008751
+
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+
+#elif defined(CONFIG_ARCH_LS1088A)
+#define CONFIG_SYS_FSL_NUM_CC_PLLS		3
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1 }
+#define CONFIG_GICV3
+#define CONFIG_SYS_PAGE_SIZE		0x10000
+
+#define	SRDS_MAX_LANES	4
+#define	SRDS_BITS_PER_LANE	4
+
+/* TZ Protection Controller Definitions */
+#define TZPC_BASE				0x02200000
+#define TZPCR0SIZE_BASE				(TZPC_BASE)
+#define TZPCDECPROT_0_STAT_BASE			(TZPC_BASE + 0x800)
+#define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
+#define TZPCDECPROT_0_CLR_BASE			(TZPC_BASE + 0x808)
+#define TZPCDECPROT_1_STAT_BASE			(TZPC_BASE + 0x80C)
+#define TZPCDECPROT_1_SET_BASE			(TZPC_BASE + 0x810)
+#define TZPCDECPROT_1_CLR_BASE			(TZPC_BASE + 0x814)
+#define TZPCDECPROT_2_STAT_BASE			(TZPC_BASE + 0x818)
+#define TZPCDECPROT_2_SET_BASE			(TZPC_BASE + 0x81C)
+#define TZPCDECPROT_2_CLR_BASE			(TZPC_BASE + 0x820)
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE			0x06000000
+#define GICR_BASE			0x06100000
+
+/* SMMU Defintions */
+#define SMMU_BASE			0x05000000 /* GR0 Base */
+
+/* DDR */
+#define CONFIG_SYS_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define CONFIG_SYS_FSL_ESDHC_LE
+#define CONFIG_SYS_FSL_IFC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
+
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	1
+#define CONFIG_SYS_FSL_OCRAM_BASE	0x18000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE	0x00200000 /* 2M space */
+#define CONFIG_SYS_FSL_OCRAM_SIZE	0x00020000 /* Real size 128K */
+
+/* LX2160A/LX2162A Soc Support */
+#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+#define TZPC_BASE				0x02200000
+#define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
+#if !CONFIG_IS_ENABLED(DM_I2C)
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_EARLY_INIT
+#endif
+#define SRDS_MAX_LANES  8
+#ifndef L1_CACHE_BYTES
+#define L1_CACHE_SHIFT		6
+#define L1_CACHE_BYTES		BIT(L1_CACHE_SHIFT)
+#endif
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER	2
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 1, 1, 4, 4, 4, 4 }
+#define CONFIG_SYS_FSL_NUM_CC_PLLS		4
+
+#define CONFIG_SYS_PAGE_SIZE			0x10000
+
+#define CONFIG_SYS_FSL_OCRAM_BASE		0x18000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE		0x00200000 /* 2M space */
+#define CONFIG_SYS_FSL_OCRAM_SIZE		0x00040000 /* Real size 256K */
+
+/* DDR */
+#define CONFIG_SYS_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED			CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define CONFIG_SYS_FSL_ESDHC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
+
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE				0x06000000
+#define GICR_BASE				0x06200000
+
+/* SMMU Definitions */
+#define SMMU_BASE				0x05000000 /* GR0 Base */
+
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+
+#elif defined(CONFIG_ARCH_LS1028A)
+#define CONFIG_SYS_FSL_NUM_CC_PLLS		3
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1 }
+#define CONFIG_GICV3
+#define CONFIG_FSL_TZPC_BP147
+#define CONFIG_FSL_TZASC_400
+
+/* TZ Protection Controller Definitions */
+#define TZPC_BASE				0x02200000
+#define TZPCR0SIZE_BASE				(TZPC_BASE)
+#define TZPCDECPROT_0_STAT_BASE			(TZPC_BASE + 0x800)
+#define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
+#define TZPCDECPROT_0_CLR_BASE			(TZPC_BASE + 0x808)
+#define TZPCDECPROT_1_STAT_BASE			(TZPC_BASE + 0x80C)
+#define TZPCDECPROT_1_SET_BASE			(TZPC_BASE + 0x810)
+#define TZPCDECPROT_1_CLR_BASE			(TZPC_BASE + 0x814)
+#define TZPCDECPROT_2_STAT_BASE			(TZPC_BASE + 0x818)
+#define TZPCDECPROT_2_SET_BASE			(TZPC_BASE + 0x81C)
+#define TZPCDECPROT_2_CLR_BASE			(TZPC_BASE + 0x820)
+
+#define	SRDS_MAX_LANES	4
+#define	SRDS_BITS_PER_LANE	4
+
+#define CONFIG_SYS_FSL_OCRAM_BASE		0x18000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE		0x00200000 /* 2M */
+#define CONFIG_SYS_FSL_OCRAM_SIZE		0x00040000 /* Real size 256K */
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE				0x06000000
+#define GICR_BASE				0x06040000
+
+/* SMMU Definitions */
+#define SMMU_BASE				0x05000000 /* GR0 Base */
+
+/* DDR */
+#define CONFIG_SYS_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define CONFIG_SYS_FSL_ESDHC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
+
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* SEC */
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+
+#elif defined(CONFIG_FSL_LSCH2)
+#define CONFIG_SYS_FSL_OCRAM_BASE		0x10000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE		0x00200000 /* 2M space */
+#define CONFIG_SYS_FSL_OCRAM_SIZE		0x00020000 /* Real size 128K */
+
+#define DCSR_DCFG_SBEESR2			0x20140534
+#define DCSR_DCFG_MBEESR2			0x20140544
+
+#define CONFIG_SYS_FSL_CCSR_SCFG_BE
+#define CONFIG_SYS_FSL_ESDHC_BE
+#define CONFIG_SYS_FSL_WDOG_BE
+#define CONFIG_SYS_FSL_DSPI_BE
+#define CONFIG_SYS_FSL_CCSR_GUR_BE
+#define CONFIG_SYS_FSL_PEX_LUT_BE
+
+/* SoC related */
+#ifdef CONFIG_ARCH_LS1043A
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FSL_QMAN_V3
+#define CONFIG_SYS_NUM_FMAN			1
+#define CONFIG_SYS_NUM_FM1_DTSEC		7
+#define CONFIG_SYS_NUM_FM1_10GEC		1
+#define CONFIG_SYS_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED			CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define QE_MURAM_SIZE		0x6000UL
+#define MAX_QE_RISC		1
+#define QE_NUM_OF_SNUM		28
+
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_SFP_VER_3_2
+#define CONFIG_SYS_FSL_SEC_MON_BE
+#define CONFIG_SYS_FSL_SFP_BE
+#define CONFIG_SYS_FSL_SRK_LE
+#define CONFIG_KEY_REVOCATION
+
+/* SMMU Defintions */
+#define SMMU_BASE		0x09000000
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE		0x01401000
+#define GICC_BASE		0x01402000
+#define GICH_BASE		0x01404000
+#define GICV_BASE		0x01406000
+#define GICD_SIZE		0x1000
+#define GICC_SIZE		0x2000
+#define GICH_SIZE		0x2000
+#define GICV_SIZE		0x2000
+#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
+#define GICD_BASE_64K		0x01410000
+#define GICC_BASE_64K		0x01420000
+#define GICH_BASE_64K		0x01440000
+#define GICV_BASE_64K		0x01460000
+#define GICD_SIZE_64K		0x10000
+#define GICC_SIZE_64K		0x20000
+#define GICH_SIZE_64K		0x20000
+#define GICV_SIZE_64K		0x20000
+#endif
+
+#define DCFG_CCSR_SVR		0x1ee00a4
+#define REV1_0			0x10
+#define REV1_1			0x11
+#define GIC_ADDR_BIT		31
+#define SCFG_GIC400_ALIGN	0x1570188
+
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+
+#elif defined(CONFIG_ARCH_LS1012A)
+#define GICD_BASE		0x01401000
+#define GICC_BASE		0x01402000
+#define CONFIG_SYS_FSL_SFP_VER_3_2
+#define CONFIG_SYS_FSL_SEC_MON_BE
+#define CONFIG_SYS_FSL_SFP_BE
+#define CONFIG_SYS_FSL_SRK_LE
+#define CONFIG_KEY_REVOCATION
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC           1
+#define CONFIG_SYS_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#elif defined(CONFIG_ARCH_LS1046A)
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FSL_QMAN_V3
+#define CONFIG_SYS_NUM_FMAN			1
+#define CONFIG_SYS_NUM_FM1_DTSEC		8
+#define CONFIG_SYS_NUM_FM1_10GEC		2
+#define CONFIG_SYS_DDR_BLOCK1_SIZE  ((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED           CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_SFP_VER_3_2
+#define CONFIG_SYS_FSL_SEC_MON_BE
+#define CONFIG_SYS_FSL_SFP_BE
+#define CONFIG_SYS_FSL_SRK_LE
+#define CONFIG_KEY_REVOCATION
+
+/* SMMU Defintions */
+#define SMMU_BASE		0x09000000
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE		0x01410000
+#define GICC_BASE		0x01420000
+
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+#else
+#error SoC not defined
+#endif
+#endif
+
+#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
new file mode 100644
index 000000000..c51b65ea3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017-2018, 2020 NXP
+ * Copyright 2014-2015, Freescale Semiconductor
+ */
+
+#ifndef _FSL_LAYERSCAPE_CPU_H
+#define _FSL_LAYERSCAPE_CPU_H
+
+#ifdef CONFIG_FSL_LSCH3
+#define CONFIG_SYS_FSL_CCSR_BASE	0x00000000
+#define CONFIG_SYS_FSL_CCSR_SIZE	0x10000000
+#define CONFIG_SYS_FSL_QSPI_BASE1	0x20000000
+#define CONFIG_SYS_FSL_QSPI_SIZE1	0x10000000
+#ifndef CONFIG_NXP_LSCH3_2
+#define CONFIG_SYS_FSL_IFC_BASE1	0x30000000
+#define CONFIG_SYS_FSL_IFC_SIZE1	0x10000000
+#define CONFIG_SYS_FSL_IFC_SIZE1_1	0x400000
+#endif
+#define CONFIG_SYS_FSL_DRAM_BASE1	0x80000000
+#define CONFIG_SYS_FSL_DRAM_SIZE1	0x80000000
+#define CONFIG_SYS_FSL_QSPI_BASE2	0x400000000
+#define CONFIG_SYS_FSL_QSPI_SIZE2	0x100000000
+#ifndef CONFIG_NXP_LSCH3_2
+#define CONFIG_SYS_FSL_IFC_BASE2	0x500000000
+#define CONFIG_SYS_FSL_IFC_SIZE2	0x100000000
+#endif
+#define CONFIG_SYS_FSL_DCSR_BASE	0x700000000
+#define CONFIG_SYS_FSL_DCSR_SIZE	0x40000000
+#define CONFIG_SYS_FSL_MC_BASE		0x80c000000
+#define CONFIG_SYS_FSL_MC_SIZE		0x4000000
+#define CONFIG_SYS_FSL_NI_BASE		0x810000000
+#define CONFIG_SYS_FSL_NI_SIZE		0x8000000
+#define CONFIG_SYS_FSL_QBMAN_BASE	0x818000000
+#define CONFIG_SYS_FSL_QBMAN_SIZE	0x8000000
+#define CONFIG_SYS_FSL_QBMAN_SIZE_1	0x4000000
+#ifdef CONFIG_ARCH_LS2080A
+#define CONFIG_SYS_PCIE1_PHYS_SIZE	0x200000000
+#define CONFIG_SYS_PCIE2_PHYS_SIZE	0x200000000
+#define CONFIG_SYS_PCIE3_PHYS_SIZE	0x200000000
+#define CONFIG_SYS_PCIE4_PHYS_SIZE	0x200000000
+#else
+#define CONFIG_SYS_PCIE1_PHYS_SIZE	0x800000000
+#define CONFIG_SYS_PCIE2_PHYS_SIZE	0x800000000
+#ifndef CONFIG_SYS_PCIE3_PHYS_SIZE
+#define CONFIG_SYS_PCIE3_PHYS_SIZE	0x800000000
+#endif
+#define CONFIG_SYS_PCIE4_PHYS_SIZE	0x800000000
+#define SYS_PCIE5_PHYS_SIZE		0x800000000
+#define SYS_PCIE6_PHYS_SIZE		0x800000000
+#endif
+#define CONFIG_SYS_FSL_WRIOP1_BASE	0x4300000000
+#define CONFIG_SYS_FSL_WRIOP1_SIZE	0x100000000
+#define CONFIG_SYS_FSL_AIOP1_BASE	0x4b00000000
+#define CONFIG_SYS_FSL_AIOP1_SIZE	0x100000000
+#if !defined(CONFIG_ARCH_LX2160A) || !defined(CONFIG_ARCH_LX2162)
+#define CONFIG_SYS_FSL_PEBUF_BASE	0x4c00000000
+#else
+#define CONFIG_SYS_FSL_PEBUF_BASE	0x1c00000000
+#endif
+#define CONFIG_SYS_FSL_PEBUF_SIZE	0x400000000
+#ifdef CONFIG_NXP_LSCH3_2
+#define CONFIG_SYS_FSL_DRAM_BASE2	0x2080000000
+#define CONFIG_SYS_FSL_DRAM_SIZE2	0x1F80000000
+#define CONFIG_SYS_FSL_DRAM_BASE3	0x6000000000
+#define CONFIG_SYS_FSL_DRAM_SIZE3	0x2000000000
+#else
+#define CONFIG_SYS_FSL_DRAM_BASE2	0x8080000000
+#define CONFIG_SYS_FSL_DRAM_SIZE2	0x7F80000000
+#endif
+#elif defined(CONFIG_FSL_LSCH2)
+#define CONFIG_SYS_FSL_CCSR_BASE	0x1000000
+#define CONFIG_SYS_FSL_CCSR_SIZE	0xf000000
+#define CONFIG_SYS_FSL_DCSR_BASE	0x20000000
+#define CONFIG_SYS_FSL_DCSR_SIZE	0x4000000
+#define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
+#define CONFIG_SYS_FSL_QSPI_SIZE	0x20000000
+#define CONFIG_SYS_FSL_IFC_BASE		0x60000000
+#define CONFIG_SYS_FSL_IFC_SIZE		0x20000000
+#define CONFIG_SYS_FSL_DRAM_BASE1	0x80000000
+#define CONFIG_SYS_FSL_DRAM_SIZE1	0x80000000
+#define CONFIG_SYS_FSL_QBMAN_BASE	0x500000000
+#define CONFIG_SYS_FSL_QBMAN_SIZE	0x10000000
+#define CONFIG_SYS_FSL_DRAM_BASE2	0x880000000
+#define CONFIG_SYS_FSL_DRAM_SIZE2	0x780000000	/* 30GB */
+#define CONFIG_SYS_PCIE1_PHYS_SIZE	0x800000000
+#define CONFIG_SYS_PCIE2_PHYS_SIZE	0x800000000
+#define CONFIG_SYS_PCIE3_PHYS_SIZE	0x800000000
+#define CONFIG_SYS_FSL_DRAM_BASE3	0x8800000000
+#define CONFIG_SYS_FSL_DRAM_SIZE3	0x7800000000	/* 480GB */
+#endif
+
+int fsl_qoriq_core_to_cluster(unsigned int core);
+u32 cpu_mask(void);
+
+#endif /* _FSL_LAYERSCAPE_CPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fdt.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fdt.h
new file mode 100644
index 000000000..ebc999cd7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fdt.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Freescale Semiconductor
+ */
+
+#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_FDT_H_
+#define _ASM_ARMV8_FSL_LAYERSCAPE_FDT_H_
+
+void fdt_fixup_board_enet(void *fdt);
+#endif	/* _ASM_ARMV8_FSL_LAYERSCAPE_FDT_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
new file mode 100644
index 000000000..3c06a55cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef _FSL_ICID_H_
+#define _FSL_ICID_H_
+
+#include <asm/types.h>
+#include <fsl_qbman.h>
+#include <fsl_sec.h>
+#include <asm/armv8/sec_firmware.h>
+
+struct icid_id_table {
+	const char *compat;
+	u32 id;
+	u32 reg;
+	phys_addr_t compat_addr;
+	phys_addr_t reg_addr;
+	bool le;
+};
+
+struct fman_icid_id_table {
+	u32 port_id;
+	u32 icid;
+};
+
+u32 get_ppid_icid(int ppid_tbl_idx, int ppid);
+int fdt_get_smmu_phandle(void *blob);
+int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids);
+void set_icids(void);
+void fdt_fixup_icid(void *blob);
+
+#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr, _le) \
+	{ .compat = name, \
+	  .id = idA, \
+	  .reg = regA, \
+	  .compat_addr = compataddr, \
+	  .reg_addr = addr, \
+	  .le = _le \
+	}
+
+#ifdef CONFIG_SYS_FSL_SEC_LE
+#define SEC_IS_LE true
+#elif defined(CONFIG_SYS_FSL_SEC_BE)
+#define SEC_IS_LE false
+#endif
+
+#ifdef CONFIG_FSL_LSCH2
+
+#ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define SCFG_IS_LE true
+#elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE)
+#define SCFG_IS_LE false
+#endif
+
+#define QDMA_IS_LE false
+
+#define SET_SCFG_ICID(compat, streamid, name, compataddr) \
+	SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \
+		offsetof(struct ccsr_scfg, name) + CONFIG_SYS_FSL_SCFG_ADDR, \
+		compataddr, SCFG_IS_LE)
+
+#define SET_USB_ICID(usb_num, compat, streamid) \
+	SET_SCFG_ICID(compat, streamid, usb##usb_num##_icid,\
+		CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
+
+#define SET_SATA_ICID(compat, streamid) \
+	SET_SCFG_ICID(compat, streamid, sata_icid,\
+		AHCI_BASE_ADDR)
+
+#define SET_SDHC_ICID(streamid) \
+	SET_SCFG_ICID("fsl,esdhc", streamid, sdhc_icid,\
+		CONFIG_SYS_FSL_ESDHC_ADDR)
+
+#define SET_EDMA_ICID(streamid) \
+	SET_SCFG_ICID("fsl,vf610-edma", streamid, edma_icid,\
+		EDMA_BASE_ADDR)
+
+#define SET_ETR_ICID(streamid) \
+	SET_SCFG_ICID(NULL, streamid, etr_icid, 0)
+
+#define SET_DEBUG_ICID(streamid) \
+	SET_SCFG_ICID(NULL, streamid, debug_icid, 0)
+
+#define SET_QE_ICID(streamid) \
+	SET_SCFG_ICID("fsl,qe", streamid, qe_icid,\
+		QE_BASE_ADDR)
+
+#define SET_QMAN_ICID(streamid) \
+	SET_ICID_ENTRY("fsl,qman", streamid, streamid, \
+		offsetof(struct ccsr_qman, liodnr) + \
+		CONFIG_SYS_FSL_QMAN_ADDR, \
+		CONFIG_SYS_FSL_QMAN_ADDR, false)
+
+#define SET_BMAN_ICID(streamid) \
+	SET_ICID_ENTRY("fsl,bman", streamid, streamid, \
+		offsetof(struct ccsr_bman, liodnr) + \
+		CONFIG_SYS_FSL_BMAN_ADDR, \
+		CONFIG_SYS_FSL_BMAN_ADDR, false)
+
+#define SET_FMAN_ICID_ENTRY(_port_id, streamid) \
+	{ .port_id = (_port_id), .icid = (streamid) }
+
+#define SEC_ICID_REG_VAL(streamid) (((streamid) << 16) | (streamid))
+
+#define SET_SEC_QI_ICID(streamid) \
+	SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \
+		0, offsetof(ccsr_sec_t, qilcr_ls) + \
+		CONFIG_SYS_FSL_SEC_ADDR, \
+		CONFIG_SYS_FSL_SEC_ADDR, SEC_IS_LE)
+
+extern struct fman_icid_id_table fman_icid_tbl[];
+extern int fman_icid_tbl_sz;
+
+#else /* CONFIG_FSL_LSCH2 */
+
+#ifdef CONFIG_SYS_FSL_CCSR_GUR_LE
+#define GUR_IS_LE true
+#elif defined(CONFIG_SYS_FSL_CCSR_GUR_BE)
+#define GUR_IS_LE false
+#endif
+
+#define QDMA_IS_LE true
+
+#define SET_GUR_ICID(compat, streamid, name, compataddr) \
+	SET_ICID_ENTRY(compat, streamid, streamid, \
+		offsetof(struct ccsr_gur, name) + CONFIG_SYS_FSL_GUTS_ADDR, \
+		compataddr, GUR_IS_LE)
+
+#define SET_USB_ICID(usb_num, compat, streamid) \
+	SET_GUR_ICID(compat, streamid, usb##usb_num##_amqr,\
+		CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
+
+#define SET_SATA_ICID(sata_num, compat, streamid) \
+	SET_GUR_ICID(compat, streamid, sata##sata_num##_amqr, \
+		AHCI_BASE_ADDR##sata_num)
+
+#define SET_SDHC_ICID(sdhc_num, streamid) \
+	SET_GUR_ICID("fsl,esdhc", streamid, sdmm##sdhc_num##_amqr,\
+		FSL_ESDHC##sdhc_num##_BASE_ADDR)
+
+#define SET_EDMA_ICID(streamid) \
+	SET_GUR_ICID("fsl,vf610-edma", streamid, spare3_amqr,\
+		EDMA_BASE_ADDR)
+
+#define SET_GPU_ICID(compat, streamid) \
+	SET_GUR_ICID(compat, streamid, misc1_amqr,\
+		GPU_BASE_ADDR)
+
+#define SET_DISPLAY_ICID(streamid) \
+	SET_GUR_ICID("arm,mali-dp500", streamid, spare2_amqr,\
+		DISPLAY_BASE_ADDR)
+
+#define SEC_ICID_REG_VAL(streamid) (streamid)
+
+#endif /* CONFIG_FSL_LSCH2 */
+
+#define SET_QDMA_ICID(compat, streamid) \
+	SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \
+		QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \
+		QDMA_BASE_ADDR, QDMA_IS_LE), \
+	SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \
+		QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \
+		QDMA_BASE_ADDR, QDMA_IS_LE)
+
+#define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
+	SET_ICID_ENTRY( \
+		(CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT) && \
+		(FSL_SEC_JR##jr_num##_OFFSET ==  \
+			SEC_JR3_OFFSET + CONFIG_SYS_FSL_SEC_OFFSET) \
+			? NULL \
+			: "fsl,sec-v4.0-job-ring"), \
+		streamid, \
+		SEC_ICID_REG_VAL(streamid), \
+		offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \
+		CONFIG_SYS_FSL_SEC_ADDR, \
+		FSL_SEC_JR##jr_num##_BASE_ADDR, SEC_IS_LE)
+
+#define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \
+	SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
+		offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \
+		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
+
+#define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \
+	SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
+		offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \
+		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
+
+extern struct icid_id_table icid_tbl[];
+extern int icid_tbl_sz;
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_portals.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_portals.h
new file mode 100644
index 000000000..1577e935a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_portals.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef _FSL_PORTALS_H_
+#define _FSL_PORTALS_H_
+
+struct qportal_info {
+	u16	dicid;	/* DQRR ICID */
+	u16	ficid;	/* frame data ICID */
+	u16	icid;
+	u8	sdest;
+};
+
+#define SET_QP_INFO(streamid, dest) \
+	{ .dicid = (streamid), .ficid = (streamid), .icid = (streamid), \
+	.sdest = (dest) }
+
+extern struct qportal_info qp_info[];
+void fdt_portal(void *blob, const char *compat, const char *container,
+		u64 addr, u32 size);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
new file mode 100644
index 000000000..8f4365175
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -0,0 +1,218 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_SERDES_H__
+#define __FSL_SERDES_H__
+
+#include <config.h>
+
+#ifdef CONFIG_FSL_LSCH3
+enum srds_prtcl {
+	/*
+	 * Nobody will check whether the device 'NONE' has been configured,
+	 * So use it to indicate if the serdes_prtcl_map has been initialized.
+	 */
+	NONE = 0,
+	PCIE1,
+	PCIE2,
+	PCIE3,
+	PCIE4,
+	PCIE5,
+	PCIE6,
+	SATA1,
+	SATA2,
+	SATA3,
+	SATA4,
+	XAUI1,
+	XAUI2,
+	XFI1,
+	XFI2,
+	XFI3,
+	XFI4,
+	XFI5,
+	XFI6,
+	XFI7,
+	XFI8,
+	XFI9,
+	XFI10,
+	XFI11,
+	XFI12,
+	XFI13,
+	XFI14,
+	SGMII1,
+	SGMII2,
+	SGMII3,
+	SGMII4,
+	SGMII5,
+	SGMII6,
+	SGMII7,
+	SGMII8,
+	SGMII9,
+	SGMII10,
+	SGMII11,
+	SGMII12,
+	SGMII13,
+	SGMII14,
+	SGMII15,
+	SGMII16,
+	SGMII17,
+	SGMII18,
+	QSGMII_A,
+	QSGMII_B,
+	QSGMII_C,
+	QSGMII_D,
+	SGMII_T1,
+	SGMII_T2,
+	SGMII_T3,
+	SGMII_T4,
+	SXGMII1,
+	SXGMII2,
+	SXGMII3,
+	SXGMII4,
+	QXGMII1,
+	QXGMII2,
+	QXGMII3,
+	QXGMII4,
+	_25GE1,
+	_25GE2,
+	_25GE3,
+	_25GE4,
+	_25GE5,
+	_25GE6,
+	_25GE7,
+	_25GE8,
+	_25GE9,
+	_25GE10,
+	_40GE1,
+	_40GE2,
+	_50GE1,
+	_50GE2,
+	_100GE1,
+	_100GE2,
+	SERDES_PRCTL_COUNT
+};
+
+enum srds {
+	FSL_SRDS_1  = 0,
+	FSL_SRDS_2  = 1,
+	NXP_SRDS_3  = 2,
+};
+#elif defined(CONFIG_FSL_LSCH2)
+enum srds_prtcl {
+	/*
+	 * Nobody will check whether the device 'NONE' has been configured,
+	 * So use it to indicate if the serdes_prtcl_map has been initialized.
+	 */
+	NONE = 0,
+	PCIE1,
+	PCIE2,
+	PCIE3,
+	PCIE4,
+	SATA1,
+	SATA2,
+	SRIO1,
+	SRIO2,
+	SGMII_FM1_DTSEC1,
+	SGMII_FM1_DTSEC2,
+	SGMII_FM1_DTSEC3,
+	SGMII_FM1_DTSEC4,
+	SGMII_FM1_DTSEC5,
+	SGMII_FM1_DTSEC6,
+	SGMII_FM1_DTSEC9,
+	SGMII_FM1_DTSEC10,
+	SGMII_FM2_DTSEC1,
+	SGMII_FM2_DTSEC2,
+	SGMII_FM2_DTSEC3,
+	SGMII_FM2_DTSEC4,
+	SGMII_FM2_DTSEC5,
+	SGMII_FM2_DTSEC6,
+	SGMII_FM2_DTSEC9,
+	SGMII_FM2_DTSEC10,
+	SGMII_TSEC1,
+	SGMII_TSEC2,
+	SGMII_TSEC3,
+	SGMII_TSEC4,
+	XAUI_FM1,
+	XAUI_FM2,
+	AURORA,
+	CPRI1,
+	CPRI2,
+	CPRI3,
+	CPRI4,
+	CPRI5,
+	CPRI6,
+	CPRI7,
+	CPRI8,
+	XAUI_FM1_MAC9,
+	XAUI_FM1_MAC10,
+	XAUI_FM2_MAC9,
+	XAUI_FM2_MAC10,
+	HIGIG_FM1_MAC9,
+	HIGIG_FM1_MAC10,
+	HIGIG_FM2_MAC9,
+	HIGIG_FM2_MAC10,
+	QSGMII_FM1_A,		/* A indicates MACs 1,2,5,6 */
+	QSGMII_FM1_B,		/* B indicates MACs 5,6,9,10 */
+	QSGMII_FM2_A,
+	QSGMII_FM2_B,
+	XFI_FM1_MAC1,
+	XFI_FM1_MAC2,
+	XFI_FM1_MAC9,
+	XFI_FM1_MAC10,
+	XFI_FM2_MAC9,
+	XFI_FM2_MAC10,
+	INTERLAKEN,
+	QSGMII_SW1_A,		/* Indicates ports on L2 Switch */
+	QSGMII_SW1_B,
+	SGMII_2500_FM1_DTSEC1,
+	SGMII_2500_FM1_DTSEC2,
+	SGMII_2500_FM1_DTSEC3,
+	SGMII_2500_FM1_DTSEC4,
+	SGMII_2500_FM1_DTSEC5,
+	SGMII_2500_FM1_DTSEC6,
+	SGMII_2500_FM1_DTSEC9,
+	SGMII_2500_FM1_DTSEC10,
+	SGMII_2500_FM2_DTSEC1,
+	SGMII_2500_FM2_DTSEC2,
+	SGMII_2500_FM2_DTSEC3,
+	SGMII_2500_FM2_DTSEC4,
+	SGMII_2500_FM2_DTSEC5,
+	SGMII_2500_FM2_DTSEC6,
+	SGMII_2500_FM2_DTSEC9,
+	SGMII_2500_FM2_DTSEC10,
+	TX_CLK,
+	SERDES_PRCTL_COUNT
+};
+
+enum srds {
+	FSL_SRDS_1  = 0,
+	FSL_SRDS_2  = 1,
+};
+
+#endif
+
+int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_get_number(int serdes, int cfg);
+void fsl_rgmii_init(void);
+
+#ifdef CONFIG_FSL_LSCH2
+const char *serdes_clock_to_string(u32 clock);
+int get_serdes_protocol(void);
+#endif
+#ifdef CONFIG_SYS_HAS_SERDES
+/* Get the volt of SVDD in unit mV */
+int get_serdes_volt(void);
+/* Set the volt of SVDD in unit mV */
+int set_serdes_volt(int svdd);
+/* The target volt of SVDD in unit mV */
+int setup_serdes_volt(u32 svdd);
+#endif
+
+#endif /* __FSL_SERDES_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/gpio.h
new file mode 100644
index 000000000..7ae5eee8b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/gpio.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 NXP
+ */
+
+/*
+ * Dummy header file to enable CONFIG_OF_CONTROL.
+ * If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled.
+ * It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable
+ * OF_CONTROL must have arch/gpio.h.
+ */
+
+#ifndef __ASM_ARCH_MX85XX_GPIO_H
+#define __ASM_ARCH_MX85XX_GPIO_H
+
+struct mpc8xxx_gpio_plat {
+	ulong addr;
+	ulong size;
+	uint ngpios;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
new file mode 100644
index 000000000..c9be0768e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -0,0 +1,712 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ARCH_FSL_LSCH2_IMMAP_H__
+#define __ARCH_FSL_LSCH2_IMMAP_H__
+
+#include <fsl_immap.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define CONFIG_SYS_IMMR				0x01000000
+#define CONFIG_SYS_DCSRBAR			0x20000000
+#define CONFIG_SYS_DCSR_DCFG_ADDR	(CONFIG_SYS_DCSRBAR + 0x00140000)
+#define CONFIG_SYS_DCSR_COP_CCP_ADDR	(CONFIG_SYS_DCSRBAR + 0x02008040)
+
+#define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_GIC400_ADDR			(CONFIG_SYS_IMMR + 0x00400000)
+#define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x00530000)
+#define SYS_FSL_QSPI_ADDR			(CONFIG_SYS_IMMR + 0x00550000)
+#define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x00560000)
+#define CONFIG_SYS_FSL_CSU_ADDR			(CONFIG_SYS_IMMR + 0x00510000)
+#define CONFIG_SYS_FSL_GUTS_ADDR		(CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_RST_ADDR			(CONFIG_SYS_IMMR + 0x00ee00b0)
+#define CONFIG_SYS_FSL_SCFG_ADDR		(CONFIG_SYS_IMMR + 0x00570000)
+#define CONFIG_SYS_FSL_BMAN_ADDR		(CONFIG_SYS_IMMR + 0x00890000)
+#define CONFIG_SYS_FSL_QMAN_ADDR		(CONFIG_SYS_IMMR + 0x00880000)
+#define CONFIG_SYS_FSL_FMAN_ADDR		(CONFIG_SYS_IMMR + 0x00a00000)
+#define CONFIG_SYS_FSL_SERDES_ADDR		(CONFIG_SYS_IMMR + 0x00ea0000)
+#define CONFIG_SYS_FSL_DCFG_ADDR		(CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_CLK_ADDR			(CONFIG_SYS_IMMR + 0x00ee1000)
+#define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011c0500)
+#define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011c0600)
+#define CONFIG_SYS_NS16550_COM3			(CONFIG_SYS_IMMR + 0x011d0500)
+#define CONFIG_SYS_NS16550_COM4			(CONFIG_SYS_IMMR + 0x011d0600)
+#define CONFIG_SYS_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x01f00000)
+#define CONFIG_SYS_XHCI_USB2_ADDR		(CONFIG_SYS_IMMR + 0x02000000)
+#define CONFIG_SYS_XHCI_USB3_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_EHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x07600000)
+#define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
+#define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
+#define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
+#define CONFIG_SYS_SEC_MON_ADDR			(CONFIG_SYS_IMMR + 0xe90000)
+#define CONFIG_SYS_SFP_ADDR			(CONFIG_SYS_IMMR + 0xe80200)
+
+#define CONFIG_SYS_BMAN_NUM_PORTALS	10
+#define CONFIG_SYS_BMAN_MEM_BASE	0x508000000
+#define CONFIG_SYS_BMAN_MEM_PHYS	(0xf00000000ull + \
+						CONFIG_SYS_BMAN_MEM_BASE)
+#define CONFIG_SYS_BMAN_MEM_SIZE	0x08000000
+#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x10000
+#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x10000
+#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
+#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
+					CONFIG_SYS_BMAN_CENA_SIZE)
+#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_SWP_ISDR_REG    0x3E80
+#define CONFIG_SYS_QMAN_NUM_PORTALS	10
+#define CONFIG_SYS_QMAN_MEM_BASE	0x500000000
+#define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+#define CONFIG_SYS_QMAN_MEM_SIZE	0x08000000
+#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x10000
+#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x10000
+#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
+#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
+					CONFIG_SYS_QMAN_CENA_SIZE)
+#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0x3680
+
+#define CONFIG_SYS_FSL_TIMER_ADDR		0x02b00000
+
+#define I2C1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01180000)
+#define I2C2_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01190000)
+#define I2C3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x011a0000)
+#define I2C4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x011b0000)
+
+#define WDOG1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01ad0000)
+
+#define QSPI0_BASE_ADDR				(CONFIG_SYS_IMMR + 0x00550000)
+#define DSPI1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01100000)
+
+#define GPIO1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1300000)
+#define GPIO2_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1310000)
+#define GPIO3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1320000)
+#define GPIO4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1330000)
+
+#define QE_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1400000)
+
+#define LPUART_BASE				(CONFIG_SYS_IMMR + 0x01950000)
+
+#define EDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01c00000)
+
+#define AHCI_BASE_ADDR				(CONFIG_SYS_IMMR + 0x02200000)
+
+#define QDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x07380000)
+#define QMAN_CQSIDR_REG				0x20a80
+
+#define CONFIG_SYS_PCIE1_PHYS_ADDR		0x4000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_ADDR		0x4800000000ULL
+#define CONFIG_SYS_PCIE3_PHYS_ADDR		0x5000000000ULL
+/* LUT registers */
+#ifdef CONFIG_ARCH_LS1012A
+#define PCIE_LUT_BASE				0xC0000
+#else
+#define PCIE_LUT_BASE				0x10000
+#endif
+#define PCIE_LUT_LCTRL0				0x7F8
+#define PCIE_LUT_DBG				0x7FC
+
+/* TZ Address Space Controller Definitions */
+#define TZASC1_BASE			0x01100000	/* as per CCSR map. */
+#define TZASC2_BASE			0x01110000	/* as per CCSR map. */
+#define TZASC3_BASE			0x01120000	/* as per CCSR map. */
+#define TZASC4_BASE			0x01130000	/* as per CCSR map. */
+#define TZASC_BUILD_CONFIG_REG(x)	((TZASC1_BASE + (x * 0x10000)))
+#define TZASC_ACTION_REG(x)		((TZASC1_BASE + (x * 0x10000)) + 0x004)
+#define TZASC_GATE_KEEPER(x)		((TZASC1_BASE + (x * 0x10000)) + 0x008)
+#define TZASC_REGION_BASE_LOW_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x100)
+#define TZASC_REGION_BASE_HIGH_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x104)
+#define TZASC_REGION_TOP_LOW_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x108)
+#define TZASC_REGION_TOP_HIGH_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x10C)
+#define TZASC_REGION_ATTRIBUTES_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x110)
+#define TZASC_REGION_ID_ACCESS_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x114)
+
+#define TP_ITYP_AV              0x00000001      /* Initiator available */
+#define TP_ITYP_TYPE(x) (((x) & 0x6) >> 1)      /* Initiator Type */
+#define TP_ITYP_TYPE_ARM        0x0
+#define TP_ITYP_TYPE_PPC        0x1             /* PowerPC */
+#define TP_ITYP_TYPE_OTHER      0x2             /* StarCore DSP */
+#define TP_ITYP_TYPE_HA         0x3             /* HW Accelerator */
+#define TP_ITYP_THDS(x) (((x) & 0x18) >> 3)     /* # threads */
+#define TP_ITYP_VER(x)  (((x) & 0xe0) >> 5)     /* Initiator Version */
+#define TY_ITYP_VER_A7          0x1
+#define TY_ITYP_VER_A53         0x2
+#define TY_ITYP_VER_A57         0x3
+#define TY_ITYP_VER_A72		0x4
+
+#define TP_CLUSTER_EOC		0xc0000000      /* end of clusters */
+#define TP_CLUSTER_INIT_MASK    0x0000003f      /* initiator mask */
+#define TP_INIT_PER_CLUSTER     4
+
+/*
+ * Define default values for some CCSR macros to make header files cleaner*
+ *
+ * To completely disable CCSR relocation in a board header file, define
+ * CONFIG_SYS_CCSR_DO_NOT_RELOCATE.  This will force CONFIG_SYS_CCSRBAR_PHYS
+ * to a value that is the same as CONFIG_SYS_CCSRBAR.
+ */
+
+#ifdef CONFIG_SYS_CCSRBAR_PHYS
+#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly.  Use \
+CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead."
+#endif
+
+#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#undef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR		0x01000000
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW	0x01000000
+#endif
+
+#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \
+				 CONFIG_SYS_CCSRBAR_PHYS_LOW)
+
+struct sys_info {
+	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	/* frequency of platform PLL */
+	unsigned long freq_systembus;
+	unsigned long freq_ddrbus;
+	unsigned long freq_localbus;
+	unsigned long freq_cga_m2;
+#ifdef CONFIG_SYS_DPAA_FMAN
+	unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
+#endif
+	unsigned long freq_qman;
+};
+
+#define CONFIG_SYS_FSL_FM1_OFFSET		0xa00000
+#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET	0xa88000
+#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET	0xa89000
+#define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET	0xa8a000
+#define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET	0xa8b000
+#define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET	0xa8c000
+#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET	0xa8d000
+
+#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET	0xae0000
+#define CONFIG_SYS_FSL_FM1_ADDR			\
+		(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_OFFSET)
+#define CONFIG_SYS_FSL_FM1_DTSEC1_ADDR		\
+		(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET)
+
+#define CONFIG_SYS_FSL_SEC_OFFSET		0x700000ull
+#define CONFIG_SYS_FSL_JR0_OFFSET		0x710000ull
+#define FSL_SEC_JR0_OFFSET			CONFIG_SYS_FSL_JR0_OFFSET
+#define FSL_SEC_JR1_OFFSET			0x720000ull
+#define FSL_SEC_JR2_OFFSET			0x730000ull
+#define FSL_SEC_JR3_OFFSET			0x740000ull
+#define CONFIG_SYS_FSL_SEC_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
+#define FSL_SEC_JR0_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR0_OFFSET)
+#define FSL_SEC_JR1_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR1_OFFSET)
+#define FSL_SEC_JR2_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR2_OFFSET)
+#define FSL_SEC_JR3_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR3_OFFSET)
+
+/* Device Configuration and Pin Control */
+#define DCFG_DCSR_PORCR1		0x0
+#define DCFG_DCSR_ECCCR2		0x524
+#define DISABLE_PFE_ECC			BIT(13)
+
+struct ccsr_gur {
+	u32     porsr1;         /* POR status 1 */
+#define FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK	0xFF800000
+	u32     porsr2;         /* POR status 2 */
+	u8      res_008[0x20-0x8];
+	u32     gpporcr1;       /* General-purpose POR configuration */
+	u32	gpporcr2;
+#define FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT	25
+#define FSL_CHASSIS2_DCFG_FUSESR_VID_MASK	0x1F
+#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT	20
+#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK	0x1F
+	u32     dcfg_fusesr;    /* Fuse status register */
+	u8      res_02c[0x70-0x2c];
+	u32     devdisr;        /* Device disable control */
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_1	0x80000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_2	0x40000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_3	0x20000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_4	0x10000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_5	0x08000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_6	0x04000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_9	0x00800000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_10	0x00400000
+#define FSL_CHASSIS2_DEVDISR2_10GEC1_1	0x00800000
+#define FSL_CHASSIS2_DEVDISR2_10GEC1_2	0x00400000
+#define FSL_CHASSIS2_DEVDISR2_10GEC1_3	0x80000000
+#define FSL_CHASSIS2_DEVDISR2_10GEC1_4	0x40000000
+	u32     devdisr2;       /* Device disable control 2 */
+	u32     devdisr3;       /* Device disable control 3 */
+	u32     devdisr4;       /* Device disable control 4 */
+	u32     devdisr5;       /* Device disable control 5 */
+	u32     devdisr6;       /* Device disable control 6 */
+	u32     devdisr7;       /* Device disable control 7 */
+	u8      res_08c[0x94-0x8c];
+	u32     coredisru;      /* uppper portion for support of 64 cores */
+	u32     coredisrl;      /* lower portion for support of 64 cores */
+	u8      res_09c[0xa0-0x9c];
+	u32     pvr;            /* Processor version */
+	u32     svr;            /* System version */
+	u32     mvr;            /* Manufacturing version */
+	u8	res_0ac[0xb0-0xac];
+	u32	rstcr;		/* Reset control */
+	u32	rstrqpblsr;	/* Reset request preboot loader status */
+	u8	res_0b8[0xc0-0xb8];
+	u32	rstrqmr1;	/* Reset request mask */
+	u8	res_0c4[0xc8-0xc4];
+	u32	rstrqsr1;	/* Reset request status */
+	u8	res_0cc[0xd4-0xcc];
+	u32	rstrqwdtmrl;	/* Reset request WDT mask */
+	u8	res_0d8[0xdc-0xd8];
+	u32	rstrqwdtsrl;	/* Reset request WDT status */
+	u8	res_0e0[0xe4-0xe0];
+	u32	brrl;		/* Boot release */
+	u8      res_0e8[0x100-0xe8];
+	u32     rcwsr[16];      /* Reset control word status */
+#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT	25
+#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK	0x1f
+#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT	16
+#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK	0x3f
+#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK	0xffff0000
+#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT	16
+#define FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK	0x0000ffff
+#define FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT	0
+#define RCW_SB_EN_REG_INDEX	7
+#define RCW_SB_EN_MASK		0x00200000
+
+	u8      res_140[0x200-0x140];
+	u32     scratchrw[4];  /* Scratch Read/Write */
+	u8      res_210[0x300-0x210];
+	u32     scratchw1r[4];  /* Scratch Read (Write once) */
+	u8      res_310[0x400-0x310];
+	u32	crstsr[12];
+	u8	res_430[0x500-0x430];
+
+	/* PCI Express n Logical I/O Device Number register */
+	u32 dcfg_ccsr_pex1liodnr;
+	u32 dcfg_ccsr_pex2liodnr;
+	u32 dcfg_ccsr_pex3liodnr;
+	u32 dcfg_ccsr_pex4liodnr;
+	/* RIO n Logical I/O Device Number register */
+	u32 dcfg_ccsr_rio1liodnr;
+	u32 dcfg_ccsr_rio2liodnr;
+	u32 dcfg_ccsr_rio3liodnr;
+	u32 dcfg_ccsr_rio4liodnr;
+	/* USB Logical I/O Device Number register */
+	u32 dcfg_ccsr_usb1liodnr;
+	u32 dcfg_ccsr_usb2liodnr;
+	u32 dcfg_ccsr_usb3liodnr;
+	u32 dcfg_ccsr_usb4liodnr;
+	/* SD/MMC Logical I/O Device Number register */
+	u32 dcfg_ccsr_sdmmc1liodnr;
+	u32 dcfg_ccsr_sdmmc2liodnr;
+	u32 dcfg_ccsr_sdmmc3liodnr;
+	u32 dcfg_ccsr_sdmmc4liodnr;
+	/* RIO Message Unit Logical I/O Device Number register */
+	u32 dcfg_ccsr_riomaintliodnr;
+
+	u8      res_544[0x550-0x544];
+	u32	sataliodnr[4];
+	u8	res_560[0x570-0x560];
+
+	u32 dcfg_ccsr_misc1liodnr;
+	u32 dcfg_ccsr_misc2liodnr;
+	u32 dcfg_ccsr_misc3liodnr;
+	u32 dcfg_ccsr_misc4liodnr;
+	u32 dcfg_ccsr_dma1liodnr;
+	u32 dcfg_ccsr_dma2liodnr;
+	u32 dcfg_ccsr_dma3liodnr;
+	u32 dcfg_ccsr_dma4liodnr;
+	u32 dcfg_ccsr_spare1liodnr;
+	u32 dcfg_ccsr_spare2liodnr;
+	u32 dcfg_ccsr_spare3liodnr;
+	u32 dcfg_ccsr_spare4liodnr;
+	u8	res_5a0[0x600-0x5a0];
+	u32 dcfg_ccsr_pblsr;
+
+	u32	pamubypenr;
+	u32	dmacr1;
+
+	u8	res_60c[0x610-0x60c];
+	u32 dcfg_ccsr_gensr1;
+	u32 dcfg_ccsr_gensr2;
+	u32 dcfg_ccsr_gensr3;
+	u32 dcfg_ccsr_gensr4;
+	u32 dcfg_ccsr_gencr1;
+	u32 dcfg_ccsr_gencr2;
+	u32 dcfg_ccsr_gencr3;
+	u32 dcfg_ccsr_gencr4;
+	u32 dcfg_ccsr_gencr5;
+	u32 dcfg_ccsr_gencr6;
+	u32 dcfg_ccsr_gencr7;
+	u8	res_63c[0x658-0x63c];
+	u32 dcfg_ccsr_cgensr1;
+	u32 dcfg_ccsr_cgensr0;
+	u8	res_660[0x678-0x660];
+	u32 dcfg_ccsr_cgencr1;
+
+	u32 dcfg_ccsr_cgencr0;
+	u8	res_680[0x700-0x680];
+	u32 dcfg_ccsr_sriopstecr;
+	u32 dcfg_ccsr_dcsrcr;
+
+	u8      res_708[0x740-0x708];   /* add more registers when needed */
+	u32     tp_ityp[64];    /* Topology Initiator Type Register */
+	struct {
+		u32     upper;
+		u32     lower;
+	} tp_cluster[16];
+	u8      res_8c0[0xa00-0x8c0];   /* add more registers when needed */
+	u32 dcfg_ccsr_qmbm_warmrst;
+	u8      res_a04[0xa20-0xa04];   /* add more registers when needed */
+	u32 dcfg_ccsr_reserved0;
+	u32 dcfg_ccsr_reserved1;
+};
+
+#define SCFG_QSPI_CLKSEL		0x40100000
+#define SCFG_USBDRVVBUS_SELCR_USB1	0x00000000
+#define SCFG_USBDRVVBUS_SELCR_USB2	0x00000001
+#define SCFG_USBDRVVBUS_SELCR_USB3	0x00000002
+#define SCFG_USBPWRFAULT_INACTIVE	0x00000000
+#define SCFG_USBPWRFAULT_SHARED		0x00000001
+#define SCFG_USBPWRFAULT_DEDICATED	0x00000002
+#define SCFG_USBPWRFAULT_USB3_SHIFT	4
+#define SCFG_USBPWRFAULT_USB2_SHIFT	2
+#define SCFG_USBPWRFAULT_USB1_SHIFT	0
+
+#define SCFG_BASE			0x01570000
+#define SCFG_USB3PRM1CR_USB1		0x070
+#define SCFG_USB3PRM2CR_USB1		0x074
+#define SCFG_USB3PRM1CR_USB2		0x07C
+#define SCFG_USB3PRM2CR_USB2		0x080
+#define SCFG_USB3PRM1CR_USB3		0x088
+#define SCFG_USB3PRM2CR_USB3		0x08c
+#define SCFG_USB_TXVREFTUNE			0x9
+#define SCFG_USB_SQRXTUNE_MASK		0x7
+#define SCFG_USB_PCSTXSWINGFULL		0x47
+#define SCFG_USB_PHY1			0x084F0000
+#define SCFG_USB_PHY2			0x08500000
+#define SCFG_USB_PHY3			0x08510000
+#define SCFG_USB_PHY_RX_OVRD_IN_HI		0x200c
+#define USB_PHY_RX_EQ_VAL_1		0x0000
+#define USB_PHY_RX_EQ_VAL_2		0x0080
+#define USB_PHY_RX_EQ_VAL_3		0x0380
+#define USB_PHY_RX_EQ_VAL_4		0x0b80
+
+#define SCFG_SNPCNFGCR_SECRDSNP		0x80000000
+#define SCFG_SNPCNFGCR_SECWRSNP		0x40000000
+#define SCFG_SNPCNFGCR_SATARDSNP	0x00800000
+#define SCFG_SNPCNFGCR_SATAWRSNP	0x00400000
+#define SCFG_SNPCNFGCR_USB1RDSNP	0x00200000
+#define SCFG_SNPCNFGCR_USB1WRSNP	0x00100000
+#define SCFG_SNPCNFGCR_USB2RDSNP	0x00008000
+#define SCFG_SNPCNFGCR_USB2WRSNP	0x00010000
+#define SCFG_SNPCNFGCR_USB3RDSNP	0x00002000
+#define SCFG_SNPCNFGCR_USB3WRSNP	0x00004000
+
+/* RGMIIPCR bit definitions*/
+#define SCFG_RGMIIPCR_EN_AUTO		BIT(3)
+#define SCFG_RGMIIPCR_SETSP_1000M	BIT(2)
+#define SCFG_RGMIIPCR_SETSP_100M	0
+#define SCFG_RGMIIPCR_SETSP_10M		BIT(1)
+#define SCFG_RGMIIPCR_SETFD		BIT(0)
+
+/* PFEASBCR bit definitions */
+#define SCFG_PFEASBCR_ARCACHE0		BIT(31)
+#define SCFG_PFEASBCR_AWCACHE0		BIT(30)
+#define SCFG_PFEASBCR_ARCACHE1		BIT(29)
+#define SCFG_PFEASBCR_AWCACHE1		BIT(28)
+#define SCFG_PFEASBCR_ARSNP		BIT(27)
+#define SCFG_PFEASBCR_AWSNP		BIT(26)
+
+/* WR_QoS1 PFE bit definitions */
+#define SCFG_WR_QOS1_PFE1_QOS		GENMASK(27, 24)
+#define SCFG_WR_QOS1_PFE2_QOS		GENMASK(23, 20)
+
+/* RD_QoS1 PFE bit definitions */
+#define SCFG_RD_QOS1_PFE1_QOS		GENMASK(27, 24)
+#define SCFG_RD_QOS1_PFE2_QOS		GENMASK(23, 20)
+
+/* Supplemental Configuration Unit */
+struct ccsr_scfg {
+	u8 res_000[0x100-0x000];
+	u32 usb2_icid;
+	u32 usb3_icid;
+	u8 res_108[0x114-0x108];
+	u32 dma_icid;
+	u32 sata_icid;
+	u32 usb1_icid;
+	u32 qe_icid;
+	u32 sdhc_icid;
+	u32 edma_icid;
+	u32 etr_icid;
+	u32 core_sft_rst[4];
+	u8 res_140[0x158-0x140];
+	u32 altcbar;
+	u32 qspi_cfg;
+	u8 res_160[0x164 - 0x160];
+	u32 wr_qos1;
+	u32 wr_qos2;
+	u32 rd_qos1;
+	u32 rd_qos2;
+	u8 res_174[0x180 - 0x174];
+	u32 dmamcr;
+	u8 res_184[0x188-0x184];
+	u32 gic_align;
+	u32 debug_icid;
+	u8 res_190[0x1a4-0x190];
+	u32 snpcnfgcr;
+	u8 res_1a8[0x1ac-0x1a8];
+	u32 intpcr;
+	u8 res_1b0[0x204-0x1b0];
+	u32 coresrencr;
+	u8 res_208[0x220-0x208];
+	u32 rvbar0_0;
+	u32 rvbar0_1;
+	u32 rvbar1_0;
+	u32 rvbar1_1;
+	u32 rvbar2_0;
+	u32 rvbar2_1;
+	u32 rvbar3_0;
+	u32 rvbar3_1;
+	u32 lpmcsr;
+	u8 res_244[0x400-0x244];
+	u32 qspidqscr;
+	u32 ecgtxcmcr;
+	u32 sdhciovselcr;
+	u32 rcwpmuxcr0;
+	u32 usbdrvvbus_selcr;
+	u32 usbpwrfault_selcr;
+	u32 usb_refclk_selcr1;
+	u32 usb_refclk_selcr2;
+	u32 usb_refclk_selcr3;
+	u8 res_424[0x434 - 0x424];
+	u32 rgmiipcr;
+	u32 res_438;
+	u32 rgmiipsr;
+	u32 pfepfcssr1;
+	u32 pfeintencr1;
+	u32 pfepfcssr2;
+	u32 pfeintencr2;
+	u32 pfeerrcr;
+	u32 pfeeerrintencr;
+	u32 pfeasbcr;
+	u32 pfebsbcr;
+	u8 res_460[0x484 - 0x460];
+	u32 mdioselcr;
+	u8 res_468[0x600 - 0x488];
+	u32 scratchrw[4];
+	u8 res_610[0x680-0x610];
+	u32 corebcr;
+	u8 res_684[0x1000-0x684];
+	u32 pex1msiir;
+	u32 pex1msir;
+	u8 res_1008[0x2000-0x1008];
+	u32 pex2;
+	u32 pex2msir;
+	u8 res_2008[0x3000-0x2008];
+	u32 pex3msiir;
+	u32 pex3msir;
+};
+
+/* Clocking */
+struct ccsr_clk {
+	struct {
+		u32 clkcncsr;	/* core cluster n clock control status */
+		u8  res_004[0x0c];
+		u32 clkcghwacsr; /* Clock generator n hardware accelerator */
+		u8  res_014[0x0c];
+	} clkcsr[4];
+	u8	res_040[0x780]; /* 0x100 */
+	struct {
+		u32 pllcngsr;
+		u8 res_804[0x1c];
+	} pllcgsr[2];
+	u8	res_840[0x1c0];
+	u32	clkpcsr;	/* 0xa00 Platform clock domain control/status */
+	u8	res_a04[0x1fc];
+	u32	pllpgsr;	/* 0xc00 Platform PLL General Status */
+	u8	res_c04[0x1c];
+	u32	plldgsr;	/* 0xc20 DDR PLL General Status */
+	u8	res_c24[0x3dc];
+};
+
+/* System Counter */
+struct sctr_regs {
+	u32 cntcr;
+	u32 cntsr;
+	u32 cntcv1;
+	u32 cntcv2;
+	u32 resv1[4];
+	u32 cntfid0;
+	u32 cntfid1;
+	u32 resv2[1002];
+	u32 counterid[12];
+};
+
+#define SRDS_MAX_LANES		4
+struct ccsr_serdes {
+	struct {
+		u32	rstctl;	/* Reset Control Register */
+#define SRDS_RSTCTL_RST		0x80000000
+#define SRDS_RSTCTL_RSTDONE	0x40000000
+#define SRDS_RSTCTL_RSTERR	0x20000000
+#define SRDS_RSTCTL_SWRST	0x10000000
+#define SRDS_RSTCTL_SDEN	0x00000020
+#define SRDS_RSTCTL_SDRST_B	0x00000040
+#define SRDS_RSTCTL_PLLRST_B	0x00000080
+		u32	pllcr0; /* PLL Control Register 0 */
+#define SRDS_PLLCR0_POFF		0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK	0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100	0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125	0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25	0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150	0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13	0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88	0x50000000
+#define SRDS_PLLCR0_PLL_LCK		0x00800000
+#define SRDS_PLLCR0_FRATE_SEL_MASK	0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5		0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75	0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15	0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4		0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12	0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3		0x000a0000
+		u32	pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL	0x08000000
+		u32	res_0c;	/* 0x00c */
+		u32	pllcr3;
+		u32	pllcr4;
+		u32	pllcr5; /* 0x018 SerDes PLL1 Control 5 */
+		u8	res_1c[0x20-0x1c];
+	} bank[2];
+	u8	res_40[0x90-0x40];
+	u32	srdstcalcr;	/* 0x90 TX Calibration Control */
+	u8	res_94[0xa0-0x94];
+	u32	srdsrcalcr;	/* 0xa0 RX Calibration Control */
+	u8	res_a4[0xb0-0xa4];
+	u32	srdsgr0;	/* 0xb0 General Register 0 */
+	u8	res_b4[0x100-0xb4];
+	struct {
+		u32	lnpssr0;	/* 0x100, 0x120, 0x140, 0x160 */
+		u8	res_104[0x120-0x104];
+	} lnpssr[4];	/* Lane A, B, C, D */
+	u8	res_180[0x200-0x180];
+	u32	srdspccr0;	/* 0x200 Protocol Configuration 0 */
+	u32	srdspccr1;	/* 0x204 Protocol Configuration 1 */
+	u32	srdspccr2;	/* 0x208 Protocol Configuration 2 */
+	u32	srdspccr3;	/* 0x20c Protocol Configuration 3 */
+	u32	srdspccr4;	/* 0x210 Protocol Configuration 4 */
+	u32	srdspccr5;	/* 0x214 Protocol Configuration 5 */
+	u32	srdspccr6;	/* 0x218 Protocol Configuration 6 */
+	u32	srdspccr7;	/* 0x21c Protocol Configuration 7 */
+	u32	srdspccr8;	/* 0x220 Protocol Configuration 8 */
+	u32	srdspccr9;	/* 0x224 Protocol Configuration 9 */
+	u32	srdspccra;	/* 0x228 Protocol Configuration A */
+	u32	srdspccrb;	/* 0x22c Protocol Configuration B */
+	u8	res_230[0x800-0x230];
+	struct {
+		u32	gcr0;	/* 0x800 General Control Register 0 */
+		u32	gcr1;	/* 0x804 General Control Register 1 */
+		u32	gcr2;	/* 0x808 General Control Register 2 */
+		u32	sscr0;
+		u32	recr0;	/* 0x810 Receive Equalization Control */
+		u32	recr1;
+		u32	tecr0;	/* 0x818 Transmit Equalization Control */
+		u32	sscr1;
+		u32	ttlcr0;	/* 0x820 Transition Tracking Loop Ctrl 0 */
+		u8	res_824[0x83c-0x824];
+		u32	tcsr3;
+	} lane[4];	/* Lane A, B, C, D */
+	u8	res_900[0x1000-0x900];	/* from 0x900 to 0xfff */
+	struct {
+		u32	srdspexcr0;	/* 0x1000, 0x1040, 0x1080 */
+		u8	res_1004[0x1040-0x1004];
+	} pcie[3];
+	u8	res_10c0[0x1800-0x10c0];
+	struct {
+		u8	res_1800[0x1804-0x1800];
+		u32	srdssgmiicr1;	/* 0x1804 SGMII Protocol Control 1 */
+		u8	res_1808[0x180c-0x1808];
+		u32	srdssgmiicr3;	/* 0x180c SGMII Protocol Control 3 */
+	} sgmii[4];	/* Lane A, B, C, D */
+	u8	res_1840[0x1880-0x1840];
+	struct {
+		u8	res_1880[0x1884-0x1880];
+		u32	srdsqsgmiicr1;	/* 0x1884 QSGMII Protocol Control 1 */
+		u8	res_1888[0x188c-0x1888];
+		u32	srdsqsgmiicr3;	/* 0x188c QSGMII Protocol Control 3 */
+	} qsgmii[2];	/* Lane A, B */
+	u8	res_18a0[0x1980-0x18a0];
+	struct {
+		u8	res_1980[0x1984-0x1980];
+		u32	srdsxficr1;	/* 0x1984 XFI Protocol Control 1 */
+		u8	res_1988[0x198c-0x1988];
+		u32	srdsxficr3;	/* 0x198c XFI Protocol Control 3 */
+	} xfi[2];	/* Lane A, B */
+	u8	res_19a0[0x2000-0x19a0];	/* from 0x19a0 to 0x1fff */
+};
+
+struct ccsr_gpio {
+	u32	gpdir;
+	u32	gpodr;
+	u32	gpdat;
+	u32	gpier;
+	u32	gpimr;
+	u32	gpicr;
+	u32	gpibe;
+};
+
+/* MMU 500 */
+#define SMMU_SCR0			(SMMU_BASE + 0x0)
+#define SMMU_SCR1			(SMMU_BASE + 0x4)
+#define SMMU_SCR2			(SMMU_BASE + 0x8)
+#define SMMU_SACR			(SMMU_BASE + 0x10)
+#define SMMU_IDR0			(SMMU_BASE + 0x20)
+#define SMMU_IDR1			(SMMU_BASE + 0x24)
+
+#define SMMU_NSCR0			(SMMU_BASE + 0x400)
+#define SMMU_NSCR2			(SMMU_BASE + 0x408)
+#define SMMU_NSACR			(SMMU_BASE + 0x410)
+
+#define SCR0_CLIENTPD_MASK		0x00000001
+#define SCR0_USFCFG_MASK		0x00000400
+
+#ifdef CONFIG_TFABOOT
+#define RCW_SRC_MASK			(0xFF800000)
+#define RCW_SRC_BIT			23
+
+/* RCW SRC NAND */
+#define RCW_SRC_NAND_MASK		(0x100)
+#define RCW_SRC_NAND_VAL		(0x100)
+#define NAND_RESERVED_MASK		(0xFC)
+#define NAND_RESERVED_1			(0x0)
+#define NAND_RESERVED_2			(0x80)
+
+/* RCW SRC NOR */
+#define RCW_SRC_NOR_MASK		(0x1F0)
+#define NOR_8B_VAL			(0x10)
+#define NOR_16B_VAL			(0x20)
+#define SD_VAL				(0x40)
+#define QSPI_VAL1			(0x44)
+#define QSPI_VAL2			(0x45)
+#endif
+
+uint get_svr(void);
+
+#endif	/* __ARCH_FSL_LSCH2_IMMAP_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
new file mode 100644
index 000000000..b64d7fbc1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -0,0 +1,603 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * LayerScape Internal Memory Map
+ *
+ * Copyright 2017-2020 NXP
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ARCH_FSL_LSCH3_IMMAP_H_
+#define __ARCH_FSL_LSCH3_IMMAP_H_
+
+#define CONFIG_SYS_IMMR				0x01000000
+#define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_FSL_DDR2_ADDR		(CONFIG_SYS_IMMR + 0x00090000)
+#define CONFIG_SYS_FSL_DDR3_ADDR		0x08210000
+#define CONFIG_SYS_FSL_GUTS_ADDR		(CONFIG_SYS_IMMR + 0x00E00000)
+#define CONFIG_SYS_FSL_PMU_ADDR			(CONFIG_SYS_IMMR + 0x00E30000)
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+#define CONFIG_SYS_FSL_RST_ADDR			(CONFIG_SYS_IMMR + 0x00e88180)
+#else
+#define CONFIG_SYS_FSL_RST_ADDR			(CONFIG_SYS_IMMR + 0x00E60000)
+#endif
+#define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR	(CONFIG_SYS_IMMR + 0x00300000)
+#define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR	(CONFIG_SYS_IMMR + 0x00310000)
+#define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR	(CONFIG_SYS_IMMR + 0x00370000)
+#ifndef CONFIG_NXP_LSCH3_2
+#define SYS_FSL_QSPI_ADDR			(CONFIG_SYS_IMMR + 0x010c0000)
+#else
+#define SYS_NXP_FSPI_ADDR			(CONFIG_SYS_IMMR + 0x010c0000)
+#define SYS_NXP_FSPI_LUTKEY_BASE_ADDR		0x18
+#define SYS_NXP_FSPI_LUT_BASE_ADDR		0x200
+#endif
+#define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x01140000)
+#define FSL_ESDHC1_BASE_ADDR			CONFIG_SYS_FSL_ESDHC_ADDR
+#define FSL_ESDHC2_BASE_ADDR			(CONFIG_SYS_IMMR + 0x01150000)
+#ifndef CONFIG_NXP_LSCH3_2
+#define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x01240000)
+#endif
+#define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011C0500)
+#define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011C0600)
+#define SYS_FSL_LS2080A_LS2085A_TIMER_ADDR	0x023d0000
+#define CONFIG_SYS_FSL_TIMER_ADDR		0x023e0000
+#define CONFIG_SYS_FSL_PMU_CLTBENR		(CONFIG_SYS_FSL_PMU_ADDR + \
+						 0x18A0)
+#define FSL_PMU_PCTBENR_OFFSET (CONFIG_SYS_FSL_PMU_ADDR + 0x8A0)
+#define FSL_LSCH3_SVR		(CONFIG_SYS_FSL_GUTS_ADDR + 0xA4)
+
+#define CONFIG_SYS_FSL_WRIOP1_ADDR		(CONFIG_SYS_IMMR + 0x7B80000)
+#define CONFIG_SYS_FSL_WRIOP1_MDIO1	(CONFIG_SYS_FSL_WRIOP1_ADDR + 0x16000)
+#define CONFIG_SYS_FSL_WRIOP1_MDIO2	(CONFIG_SYS_FSL_WRIOP1_ADDR + 0x17000)
+#define CONFIG_SYS_FSL_LSCH3_SERDES_ADDR	(CONFIG_SYS_IMMR + 0xEA0000)
+
+#define CONFIG_SYS_FSL_DCSR_DDR_ADDR		0x70012c000ULL
+#define CONFIG_SYS_FSL_DCSR_DDR2_ADDR		0x70012d000ULL
+#define CONFIG_SYS_FSL_DCSR_DDR3_ADDR		0x700132000ULL
+#define CONFIG_SYS_FSL_DCSR_DDR4_ADDR		0x700133000ULL
+
+#define I2C1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01000000)
+#define I2C2_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01010000)
+#define I2C3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01020000)
+#define I2C4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01030000)
+#ifdef CONFIG_NXP_LSCH3_2
+#define I2C5_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01040000)
+#define I2C6_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01050000)
+#define I2C7_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01060000)
+#define I2C8_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01070000)
+#endif
+#define GPIO4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01330000)
+#define GPIO4_GPDIR_ADDR			(GPIO4_BASE_ADDR + 0x0)
+#define GPIO4_GPDAT_ADDR			(GPIO4_BASE_ADDR + 0x8)
+
+#define CONFIG_SYS_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_XHCI_USB2_ADDR		(CONFIG_SYS_IMMR + 0x02110000)
+
+/* TZ Address Space Controller Definitions */
+#define TZASC1_BASE			0x01100000	/* as per CCSR map. */
+#define TZASC2_BASE			0x01110000	/* as per CCSR map. */
+#define TZASC3_BASE			0x01120000	/* as per CCSR map. */
+#define TZASC4_BASE			0x01130000	/* as per CCSR map. */
+#define TZASC_BUILD_CONFIG_REG(x)	((TZASC1_BASE + (x * 0x10000)))
+#define TZASC_ACTION_REG(x)		((TZASC1_BASE + (x * 0x10000)) + 0x004)
+#define TZASC_GATE_KEEPER(x)		((TZASC1_BASE + (x * 0x10000)) + 0x008)
+#define TZASC_REGION_BASE_LOW_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x100)
+#define TZASC_REGION_BASE_HIGH_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x104)
+#define TZASC_REGION_TOP_LOW_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x108)
+#define TZASC_REGION_TOP_HIGH_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x10C)
+#define TZASC_REGION_ATTRIBUTES_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x110)
+#define TZASC_REGION_ID_ACCESS_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x114)
+
+/* EDMA */
+#define EDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x012c0000)
+
+/* SATA */
+#define AHCI_BASE_ADDR1				(CONFIG_SYS_IMMR + 0x02200000)
+#define AHCI_BASE_ADDR2				(CONFIG_SYS_IMMR + 0x02210000)
+#define AHCI_BASE_ADDR3				(CONFIG_SYS_IMMR + 0x02220000)
+#define AHCI_BASE_ADDR4				(CONFIG_SYS_IMMR + 0x02230000)
+
+/* QDMA */
+#define QDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x07380000)
+#define QMAN_CQSIDR_REG				0x20a80
+
+/* DISPLAY */
+#define DISPLAY_BASE_ADDR			(CONFIG_SYS_IMMR + 0x0e080000)
+
+/* GPU */
+#define GPU_BASE_ADDR				(CONFIG_SYS_IMMR + 0x0e0c0000)
+
+/* SFP */
+#define CONFIG_SYS_SFP_ADDR		(CONFIG_SYS_IMMR + 0x00e80200)
+
+/* SEC */
+#define CONFIG_SYS_FSL_SEC_OFFSET		0x07000000ull
+#define CONFIG_SYS_FSL_JR0_OFFSET		0x07010000ull
+#define FSL_SEC_JR0_OFFSET			CONFIG_SYS_FSL_JR0_OFFSET
+#define FSL_SEC_JR1_OFFSET			0x07020000ull
+#define FSL_SEC_JR2_OFFSET			0x07030000ull
+#define FSL_SEC_JR3_OFFSET			0x07040000ull
+#define CONFIG_SYS_FSL_SEC_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
+#define FSL_SEC_JR0_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR0_OFFSET)
+#define FSL_SEC_JR1_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR1_OFFSET)
+#define FSL_SEC_JR2_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR2_OFFSET)
+#define FSL_SEC_JR3_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR3_OFFSET)
+
+#ifdef CONFIG_TFABOOT
+#ifdef CONFIG_NXP_LSCH3_2
+/* RCW_SRC field in Power-On Reset Control Register 1 */
+#define RCW_SRC_MASK			0x07800000
+#define RCW_SRC_BIT			23
+
+/* CFG_RCW_SRC[3:0] */
+#define RCW_SRC_TYPE_MASK		0x8
+#define RCW_SRC_ADDR_OFFSET_8MB		0x800000
+
+/* RCW SRC HARDCODED */
+#define RCW_SRC_HARDCODED_VAL		0x0	/* 0x00 - 0x07 */
+
+#define RCW_SRC_SDHC1_VAL		0x8	/* 0x8 */
+#define RCW_SRC_SDHC2_VAL		0x9	/* 0x9 */
+#define RCW_SRC_I2C1_VAL		0xa	/* 0xa */
+#define RCW_SRC_RESERVED_UART_VAL	0xb	/* 0xb */
+#define RCW_SRC_FLEXSPI_NAND2K_VAL	0xc	/* 0xc */
+#define RCW_SRC_FLEXSPI_NAND4K_VAL	0xd	/* 0xd */
+#define RCW_SRC_RESERVED_1_VAL		0xe	/* 0xe */
+#define RCW_SRC_FLEXSPI_NOR_24B		0xf	/* 0xf */
+#else
+#define RCW_SRC_MASK			(0xFF800000)
+#define RCW_SRC_BIT			23
+/* CFG_RCW_SRC[6:0] */
+#define RCW_SRC_TYPE_MASK               (0x70)
+
+/* RCW SRC HARDCODED */
+#define RCW_SRC_HARDCODED_VAL           (0x10)     /* 0x10 - 0x1f */
+/* Hardcoded will also have CFG_RCW_SRC[7] as 1.   0x90 - 0x9f */
+
+/* RCW SRC NOR */
+#define RCW_SRC_NOR_VAL                 (0x20)
+#define NOR_TYPE_MASK                   (0x10)
+#define NOR_16B_VAL                     (0x0)       /* 0x20 - 0x2f */
+#define NOR_32B_VAL                     (0x10)       /* 0x30 - 0x3f */
+
+/* RCW SRC Serial Flash
+ * 1. SERIAL NOR (QSPI)
+ * 2. OTHERS (SD/MMC, SPI, I2C1
+ */
+#define RCW_SRC_SERIAL_MASK             (0x7F)
+#define RCW_SRC_QSPI_VAL                (0x62)     /* 0x62 */
+#define RCW_SRC_SD_CARD_VAL             (0x40)     /* 0x40 */
+#define RCW_SRC_EMMC_VAL                (0x41)     /* 0x41 */
+#define RCW_SRC_I2C1_VAL                (0x49)     /* 0x49 */
+#endif
+#endif
+
+/* Security Monitor */
+#define CONFIG_SYS_SEC_MON_ADDR		(CONFIG_SYS_IMMR + 0x00e90000)
+
+/* MMU 500 */
+#define SMMU_SCR0			(SMMU_BASE + 0x0)
+#define SMMU_SCR1			(SMMU_BASE + 0x4)
+#define SMMU_SCR2			(SMMU_BASE + 0x8)
+#define SMMU_SACR			(SMMU_BASE + 0x10)
+#define SMMU_IDR0			(SMMU_BASE + 0x20)
+#define SMMU_IDR1			(SMMU_BASE + 0x24)
+
+#define SMMU_NSCR0			(SMMU_BASE + 0x400)
+#define SMMU_NSCR2			(SMMU_BASE + 0x408)
+#define SMMU_NSACR			(SMMU_BASE + 0x410)
+
+#define SCR0_CLIENTPD_MASK		0x00000001
+#define SCR0_USFCFG_MASK		0x00000400
+
+
+/* PCIe */
+#define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
+#define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
+#define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
+#define CONFIG_SYS_PCIE4_ADDR			(CONFIG_SYS_IMMR + 0x2700000)
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+#define SYS_PCIE5_ADDR				(CONFIG_SYS_IMMR + 0x2800000)
+#define SYS_PCIE6_ADDR				(CONFIG_SYS_IMMR + 0x2900000)
+#endif
+
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+#define CONFIG_SYS_PCIE1_PHYS_ADDR		0x8000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_ADDR		0x8800000000ULL
+#define CONFIG_SYS_PCIE3_PHYS_ADDR		0x9000000000ULL
+#define CONFIG_SYS_PCIE4_PHYS_ADDR		0x9800000000ULL
+#define SYS_PCIE5_PHYS_ADDR			0xa000000000ULL
+#define SYS_PCIE6_PHYS_ADDR			0xa800000000ULL
+#elif CONFIG_ARCH_LS1088A
+#define CONFIG_SYS_PCIE1_PHYS_ADDR		0x2000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_ADDR		0x2800000000ULL
+#define CONFIG_SYS_PCIE3_PHYS_ADDR		0x3000000000ULL
+#elif CONFIG_ARCH_LS1028A
+#define CONFIG_SYS_PCIE1_PHYS_ADDR		0x8000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_ADDR		0x8800000000ULL
+#define CONFIG_SYS_PCIE3_PHYS_ADDR		0x01f0000000ULL
+/* this is used by integrated PCI on LS1028, includes ECAM and register space */
+#define CONFIG_SYS_PCIE3_PHYS_SIZE		0x0010000000ULL
+#else
+#define CONFIG_SYS_PCIE1_PHYS_ADDR		0x1000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_ADDR		0x1200000000ULL
+#define CONFIG_SYS_PCIE3_PHYS_ADDR		0x1400000000ULL
+#define CONFIG_SYS_PCIE4_PHYS_ADDR		0x1600000000ULL
+#endif
+
+/* Device Configuration */
+#define DCFG_BASE		0x01e00000
+#define DCFG_PORSR1			0x000
+#define DCFG_PORSR1_RCW_SRC		0xff800000
+#define DCFG_PORSR1_RCW_SRC_NOR		0x12f00000
+#define DCFG_RCWSR12			0x12c
+#define DCFG_RCWSR12_SDHC_SHIFT		24
+#define DCFG_RCWSR12_SDHC_MASK		0x7
+#define DCFG_RCWSR13			0x130
+#define DCFG_RCWSR13_SDHC_SHIFT		3
+#define DCFG_RCWSR13_SDHC_MASK		0x7
+#define DCFG_RCWSR13_DSPI		(0 << 8)
+#define DCFG_RCWSR15			0x138
+#define DCFG_RCWSR15_IFCGRPABASE_QSPI	0x3
+
+#define DCFG_DCSR_BASE		0X700100000ULL
+#define DCFG_DCSR_PORCR1		0x000
+
+/* Interrupt Sampling Control */
+#define ISC_BASE		0x01F70000
+#define IRQCR_OFFSET		0x14
+
+/* Supplemental Configuration */
+#define SCFG_BASE		0x01fc0000
+#define SCFG_USB3PRM1CR			0x000
+#define SCFG_USB3PRM1CR_INIT		0x27672b2a
+#define SCFG_USB_TXVREFTUNE		0x9
+#define SCFG_USB_SQRXTUNE_MASK	0x7
+#define SCFG_QSPICLKCTLR	0x10
+
+#define DCSR_BASE		0x700000000ULL
+#define DCSR_USB_PHY1			0x4600000
+#define DCSR_USB_PHY2			0x4610000
+#define DCSR_USB_PHY_RX_OVRD_IN_HI	0x200C
+#define USB_PHY_RX_EQ_VAL_1		0x0000
+#define USB_PHY_RX_EQ_VAL_2		0x0080
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+	defined(CONFIG_ARCH_LS1028A)
+#define USB_PHY_RX_EQ_VAL_3		0x0380
+#define USB_PHY_RX_EQ_VAL_4		0x0b80
+#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+#define USB_PHY_RX_EQ_VAL_3		0x0080
+#define USB_PHY_RX_EQ_VAL_4		0x0880
+#endif
+#define DCSR_USB_IOCR1			0x108004
+#define DCSR_USB_PCSTXSWINGFULL	0x71
+
+#define TP_ITYP_AV		0x00000001	/* Initiator available */
+#define TP_ITYP_TYPE(x)	(((x) & 0x6) >> 1)	/* Initiator Type */
+#define TP_ITYP_TYPE_ARM	0x0
+#define TP_ITYP_TYPE_PPC	0x1		/* PowerPC */
+#define TP_ITYP_TYPE_OTHER	0x2		/* StarCore DSP */
+#define TP_ITYP_TYPE_HA		0x3		/* HW Accelerator */
+#define TP_ITYP_THDS(x)	(((x) & 0x18) >> 3)	/* # threads */
+#define TP_ITYP_VER(x)	(((x) & 0xe0) >> 5)	/* Initiator Version */
+#define TY_ITYP_VER_A7		0x1
+#define TY_ITYP_VER_A53		0x2
+#define TY_ITYP_VER_A57		0x3
+#define TY_ITYP_VER_A72		0x4
+
+#define TP_CLUSTER_EOC		0x80000000	/* end of clusters */
+#define TP_CLUSTER_INIT_MASK	0x0000003f	/* initiator mask */
+#define TP_INIT_PER_CLUSTER     4
+/* This is chassis generation 3 */
+#ifndef __ASSEMBLY__
+struct sys_info {
+	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	/* frequency of platform PLL */
+	unsigned long freq_systembus;
+	unsigned long freq_ddrbus;
+	unsigned long freq_cga_m2;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	unsigned long freq_ddrbus2;
+#endif
+	unsigned long freq_localbus;
+	unsigned long freq_qe;
+#ifdef CONFIG_SYS_DPAA_FMAN
+	unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
+#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	unsigned long freq_qman;
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+	unsigned long freq_pme;
+#endif
+};
+
+/* Global Utilities Block */
+struct ccsr_gur {
+	u32	porsr1;		/* POR status 1 */
+	u32	porsr2;		/* POR status 2 */
+	u8	res_008[0x20-0x8];
+	u32	gpporcr1;	/* General-purpose POR configuration */
+	u32	gpporcr2;	/* General-purpose POR configuration 2 */
+	u32	gpporcr3;
+	u32	gpporcr4;
+	u8	res_030[0x60-0x30];
+#define FSL_CHASSIS3_DCFG_FUSESR_VID_MASK	0x1F
+#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK	0x1F
+#if defined(CONFIG_ARCH_LS1088A)
+#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT	25
+#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT	20
+#else
+#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT	2
+#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT	7
+#endif
+	u32	dcfg_fusesr;	/* Fuse status register */
+	u8	res_064[0x70-0x64];
+	u32	devdisr;	/* Device disable control 1 */
+	u32	devdisr2;	/* Device disable control 2 */
+	u32	devdisr3;	/* Device disable control 3 */
+	u32	devdisr4;	/* Device disable control 4 */
+	u32	devdisr5;	/* Device disable control 5 */
+	u32	devdisr6;	/* Device disable control 6 */
+	u8	res_088[0x94-0x88];
+	u32	coredisr;	/* Device disable control 7 */
+#define FSL_CHASSIS3_DEVDISR2_DPMAC1	0x00000001
+#define FSL_CHASSIS3_DEVDISR2_DPMAC2	0x00000002
+#define FSL_CHASSIS3_DEVDISR2_DPMAC3	0x00000004
+#define FSL_CHASSIS3_DEVDISR2_DPMAC4	0x00000008
+#define FSL_CHASSIS3_DEVDISR2_DPMAC5	0x00000010
+#define FSL_CHASSIS3_DEVDISR2_DPMAC6	0x00000020
+#define FSL_CHASSIS3_DEVDISR2_DPMAC7	0x00000040
+#define FSL_CHASSIS3_DEVDISR2_DPMAC8	0x00000080
+#define FSL_CHASSIS3_DEVDISR2_DPMAC9	0x00000100
+#define FSL_CHASSIS3_DEVDISR2_DPMAC10	0x00000200
+#define FSL_CHASSIS3_DEVDISR2_DPMAC11	0x00000400
+#define FSL_CHASSIS3_DEVDISR2_DPMAC12	0x00000800
+#define FSL_CHASSIS3_DEVDISR2_DPMAC13	0x00001000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC14	0x00002000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC15	0x00004000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC16	0x00008000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC17	0x00010000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC18	0x00020000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC19	0x00040000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC20	0x00080000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC21	0x00100000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC22	0x00200000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC23	0x00400000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC24	0x00800000
+	u8	res_098[0xa0-0x98];
+	u32	pvr;		/* Processor version */
+	u32	svr;		/* System version */
+	u8	res_0a8[0x100-0xa8];
+	u32	rcwsr[30];	/* Reset control word status */
+
+#define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT	2
+#define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK	0x1f
+#define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT	10
+#define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK	0x3f
+#define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT	18
+#define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK	0x3f
+
+#if defined(CONFIG_ARCH_LS2080A)
+#define	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK	0x00FF0000
+#define	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT	16
+#define	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK	0xFF000000
+#define	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT	24
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS2_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR	29
+#define FSL_CHASSIS3_SRDS2_REGSR	29
+#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+#define FSL_CHASSIS3_EC1_REGSR  27
+#define FSL_CHASSIS3_EC2_REGSR  27
+#define FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK	0x00000003
+#define FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT	0
+#define FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK	0x0000000C
+#define FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT	2
+#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK   0x001F0000
+#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT  16
+#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK   0x03E00000
+#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT  21
+#define FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_MASK   0x7C000000
+#define FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_SHIFT  26
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS2_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS3_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS3_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR	29
+#define FSL_CHASSIS3_SRDS2_REGSR	29
+#define FSL_CHASSIS3_SRDS3_REGSR	29
+#define FSL_CHASSIS3_RCWSR12_REGSR         12
+#define FSL_CHASSIS3_RCWSR13_REGSR         13
+#define FSL_CHASSIS3_SDHC1_BASE_PMUX_MASK  0x07000000
+#define FSL_CHASSIS3_SDHC1_BASE_PMUX_SHIFT 24
+#define FSL_CHASSIS3_SDHC2_BASE_PMUX_MASK  0x00000038
+#define FSL_CHASSIS3_SDHC2_BASE_PMUX_SHIFT 3
+#define FSL_CHASSIS3_IIC5_PMUX_MASK        0x00000E00
+#define FSL_CHASSIS3_IIC5_PMUX_SHIFT       9
+#elif defined(CONFIG_ARCH_LS1088A)
+#define FSL_CHASSIS3_EC1_REGSR  26
+#define FSL_CHASSIS3_EC2_REGSR  26
+#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_MASK     0x00000007
+#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_SHIFT    0
+#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_MASK     0x00000038
+#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_SHIFT    3
+#define	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK	0xFFFF0000
+#define	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT	16
+#define	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK	0x0000FFFF
+#define	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT	0
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS2_PRTCL_MASK	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR	29
+#define FSL_CHASSIS3_SRDS2_REGSR	30
+#elif defined(CONFIG_ARCH_LS1028A)
+#define	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK	0xFFFF0000
+#define	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT	16
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR	29
+#endif
+#define RCW_SB_EN_REG_INDEX	9
+#define RCW_SB_EN_MASK		0x00000400
+
+	u8	res_178[0x200-0x178];
+	u32	scratchrw[16];	/* Scratch Read/Write */
+	u8	res_240[0x300-0x240];
+	u32	scratchw1r[4];	/* Scratch Read (Write once) */
+	u8	res_310[0x400-0x310];
+	u32	bootlocptrl;	/* Boot location pointer low-order addr */
+	u32	bootlocptrh;	/* Boot location pointer high-order addr */
+	u8	res_408[0x520-0x408];
+	u32	usb1_amqr;
+	u32	usb2_amqr;
+	u8	res_528[0x530-0x528];	/* add more registers when needed */
+	u32	sdmm1_amqr;
+	u32	sdmm2_amqr;
+	u8	res_538[0x550 - 0x538];	/* add more registers when needed */
+	u32	sata1_amqr;
+	u32	sata2_amqr;
+	u32	sata3_amqr;
+	u32	sata4_amqr;
+	u8	res_560[0x570 - 0x560];	/* add more registers when needed */
+	u32	misc1_amqr;
+	u8	res_574[0x590-0x574];	/* add more registers when needed */
+	u32	spare1_amqr;
+	u32	spare2_amqr;
+	u32	spare3_amqr;
+	u8	res_59c[0x620 - 0x59c];	/* add more registers when needed */
+	u32	gencr[7];	/* General Control Registers */
+	u8	res_63c[0x640-0x63c];	/* add more registers when needed */
+	u32	cgensr1;	/* Core General Status Register */
+	u8	res_644[0x660-0x644];	/* add more registers when needed */
+	u32	cgencr1;	/* Core General Control Register */
+	u8	res_664[0x740-0x664];	/* add more registers when needed */
+	u32	tp_ityp[64];	/* Topology Initiator Type Register */
+	struct {
+		u32	upper;
+		u32	lower;
+	} tp_cluster[4];	/* Core cluster n Topology Register */
+	u8	res_864[0x920-0x864];	/* add more registers when needed */
+	u32 ioqoscr[8];	/*I/O Quality of Services Register */
+	u32 uccr;
+	u8	res_944[0x960-0x944];	/* add more registers when needed */
+	u32 ftmcr;
+	u8	res_964[0x990-0x964];	/* add more registers when needed */
+	u32 coredisablesr;
+	u8	res_994[0xa00-0x994];	/* add more registers when needed */
+	u32 sdbgcr; /*Secure Debug Confifuration Register */
+	u8	res_a04[0xbf8-0xa04];	/* add more registers when needed */
+	u32 ipbrr1;
+	u32 ipbrr2;
+	u8	res_858[0x1000-0xc00];
+};
+
+struct ccsr_clk_cluster_group {
+	struct {
+		u8	res_00[0x10];
+		u32	csr;
+		u8	res_14[0x20-0x14];
+	} hwncsr[3];
+	u8	res_60[0x80-0x60];
+	struct {
+		u32	gsr;
+		u8	res_84[0xa0-0x84];
+	} pllngsr[3];
+	u8	res_e0[0x100-0xe0];
+};
+
+struct ccsr_clk_ctrl {
+	struct {
+		u32 csr;	/* core cluster n clock control status */
+		u8  res_04[0x20-0x04];
+	} clkcncsr[8];
+};
+
+struct ccsr_reset {
+	u32 rstcr;			/* 0x000 */
+	u32 rstcrsp;			/* 0x004 */
+	u8 res_008[0x10-0x08];		/* 0x008 */
+	u32 rstrqmr1;			/* 0x010 */
+	u32 rstrqmr2;			/* 0x014 */
+	u32 rstrqsr1;			/* 0x018 */
+	u32 rstrqsr2;			/* 0x01c */
+	u32 rstrqwdtmrl;		/* 0x020 */
+	u32 rstrqwdtmru;		/* 0x024 */
+	u8 res_028[0x30-0x28];		/* 0x028 */
+	u32 rstrqwdtsrl;		/* 0x030 */
+	u32 rstrqwdtsru;		/* 0x034 */
+	u8 res_038[0x60-0x38];		/* 0x038 */
+	u32 brrl;			/* 0x060 */
+	u32 brru;			/* 0x064 */
+	u8 res_068[0x80-0x68];		/* 0x068 */
+	u32 pirset;			/* 0x080 */
+	u32 pirclr;			/* 0x084 */
+	u8 res_088[0x90-0x88];		/* 0x088 */
+	u32 brcorenbr;			/* 0x090 */
+	u8 res_094[0x100-0x94];		/* 0x094 */
+	u32 rcw_reqr;			/* 0x100 */
+	u32 rcw_completion;		/* 0x104 */
+	u8 res_108[0x110-0x108];	/* 0x108 */
+	u32 pbi_reqr;			/* 0x110 */
+	u32 pbi_completion;		/* 0x114 */
+	u8 res_118[0xa00-0x118];	/* 0x118 */
+	u32 qmbm_warmrst;		/* 0xa00 */
+	u32 soc_warmrst;		/* 0xa04 */
+	u8 res_a08[0xbf8-0xa08];	/* 0xa08 */
+	u32 ip_rev1;			/* 0xbf8 */
+	u32 ip_rev2;			/* 0xbfc */
+};
+
+struct ccsr_serdes {
+	struct {
+		u32     rstctl; /* Reset Control Register */
+		u32     pllcr0; /* PLL Control Register 0 */
+		u32     pllcr1; /* PLL Control Register 1 */
+		u32     pllcr2; /* PLL Control Register 2 */
+		u32     pllcr3; /* PLL Control Register 3 */
+		u32     pllcr4; /* PLL Control Register 4 */
+		u32     pllcr5; /* PLL Control Register 5 */
+		u8      res[0x20 - 0x1c];
+	} bank[2];
+	u8      res1[0x90 - 0x40];
+	u32     srdstcalcr;     /* TX Calibration Control */
+	u32     srdstcalcr1;    /* TX Calibration Control1 */
+	u8      res2[0xa0 - 0x98];
+	u32     srdsrcalcr;     /* RX Calibration Control */
+	u32     srdsrcalcr1;    /* RX Calibration Control1 */
+	u8      res3[0xb0 - 0xa8];
+	u32     srdsgr0;        /* General Register 0 */
+	u8      res4[0x800 - 0xb4];
+	struct serdes_lane {
+		u32     gcr0;   /* General Control Register 0 */
+		u32     gcr1;   /* General Control Register 1 */
+		u32     gcr2;   /* General Control Register 2 */
+		u32     ssc0;   /* Speed Switch Control 0 */
+		u32     rec0;   /* Receive Equalization Control 0 */
+		u32     rec1;   /* Receive Equalization Control 1 */
+		u32     tec0;   /* Transmit Equalization Control 0 */
+		u32     ssc1;   /* Speed Switch Control 1 */
+		u8      res1[0x840 - 0x820];
+	} lane[8];
+	u8 res5[0x19fc - 0xa00];
+};
+
+struct ccsr_gpio {
+	u32	gpdir;
+	u32	gpodr;
+	u32	gpdat;
+	u32	gpier;
+	u32	gpimr;
+	u32	gpicr;
+	u32	gpibe;
+};
+
+#endif /*__ASSEMBLY__ */
+#endif /* __ARCH_FSL_LSCH3_IMMAP_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h
new file mode 100644
index 000000000..d709af8f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef __ASM_ARCH_FSL_LAYERSCAPE_IMX_REGS_H__
+#define __ASM_ARCH_FSL_LAYERSCAPE_IMX_REGS_H__
+
+#define I2C_QUIRK_REG	/* enable 8-bit driver */
+
+#endif /* __ASM_ARCH_FSL_LAYERSCAPE_IMX_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/mmu.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/mmu.h
new file mode 100644
index 000000000..661cdeafd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/mmu.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015, Freescale Semiconductor
+ */
+
+#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_MMU_H_
+#define _ASM_ARMV8_FSL_LAYERSCAPE_MMU_H_
+void update_early_mmu_table(void);
+#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_MMU_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/mp.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/mp.h
new file mode 100644
index 000000000..faac8f112
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/mp.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014-2015, Freescale Semiconductor
+ */
+
+#ifndef _FSL_LAYERSCAPE_MP_H
+#define _FSL_LAYERSCAPE_MP_H
+
+/*
+* Each spin table element is defined as
+* struct {
+*      uint64_t entry_addr;
+*      uint64_t status;
+*      uint64_t lpid;
+*      uint64_t arch_comp;
+* };
+* we pad this struct to 64 bytes so each entry is in its own cacheline
+* the actual spin table is an array of these structures
+*/
+#define SPIN_TABLE_ELEM_ENTRY_ADDR_IDX	0
+#define SPIN_TABLE_ELEM_STATUS_IDX	1
+#define SPIN_TABLE_ELEM_LPID_IDX	2
+/* compare os arch and cpu arch */
+#define SPIN_TABLE_ELEM_ARCH_COMP_IDX	3
+#define WORDS_PER_SPIN_TABLE_ENTRY	8	/* pad to 64 bytes */
+#define SPIN_TABLE_ELEM_SIZE		64
+
+/* os arch is same as cpu arch */
+#define OS_ARCH_SAME			0
+/* os arch is different from cpu arch */
+#define OS_ARCH_DIFF			1
+
+#define id_to_core(x)	((x & 3) | (x >> 6))
+#ifndef __ASSEMBLY__
+extern u64 __real_cntfrq;
+extern void *secondary_boot_addr;
+extern void *secondary_boot_code_start;
+extern size_t secondary_boot_code_size;
+#ifdef CONFIG_MP
+int fsl_layerscape_wake_seconday_cores(void);
+#else
+static inline int fsl_layerscape_wake_seconday_cores(void) { return 0; }
+#endif
+void *get_spin_tbl_addr(void);
+int is_core_online(u64 cpu_id);
+u32 cpu_pos_mask(void);
+#endif
+
+#endif /* _FSL_LAYERSCAPE_MP_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
new file mode 100644
index 000000000..a26510668
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_NS_ACCESS_H_
+#define __FSL_NS_ACCESS_H_
+#include <fsl_csu.h>
+
+enum csu_cslx_ind {
+	CSU_CSLX_PCIE2_IO = 0,
+	CSU_CSLX_PCIE1_IO,
+	CSU_CSLX_MG2TPR_IP,
+	CSU_CSLX_IFC_MEM,
+	CSU_CSLX_OCRAM,
+	CSU_CSLX_GIC,
+	CSU_CSLX_PCIE1,
+	CSU_CSLX_OCRAM2,
+	CSU_CSLX_QSPI_MEM,
+	CSU_CSLX_PCIE2,
+	CSU_CSLX_SATA,
+	CSU_CSLX_USB1,
+	CSU_CSLX_QM_BM_SWPORTAL,
+	CSU_CSLX_PCIE3 = 16,
+	CSU_CSLX_PCIE3_IO,
+	CSU_CSLX_USB3 = 20,
+	CSU_CSLX_USB2,
+	CSU_CSLX_PFE = 23,
+	CSU_CSLX_SERDES = 32,
+	CSU_CSLX_QDMA,
+	CSU_CSLX_LPUART2,
+	CSU_CSLX_LPUART1,
+	CSU_CSLX_LPUART4,
+	CSU_CSLX_LPUART3,
+	CSU_CSLX_LPUART6,
+	CSU_CSLX_LPUART5,
+	CSU_CSLX_DSPI1 = 41,
+	CSU_CSLX_QSPI,
+	CSU_CSLX_ESDHC,
+	CSU_CSLX_IFC = 45,
+	CSU_CSLX_I2C1,
+	CSU_CSLX_USB_2,
+	CSU_CSLX_I2C3 = 48,
+	CSU_CSLX_I2C2,
+	CSU_CSLX_DUART2 = 50,
+	CSU_CSLX_DUART1,
+	CSU_CSLX_WDT2,
+	CSU_CSLX_WDT1,
+	CSU_CSLX_EDMA,
+	CSU_CSLX_SYS_CNT,
+	CSU_CSLX_DMA_MUX2,
+	CSU_CSLX_DMA_MUX1,
+	CSU_CSLX_DDR,
+	CSU_CSLX_QUICC,
+	CSU_CSLX_DCFG_CCU_RCPM = 60,
+	CSU_CSLX_SECURE_BOOTROM,
+	CSU_CSLX_SFP,
+	CSU_CSLX_TMU,
+	CSU_CSLX_SECURE_MONITOR,
+	CSU_CSLX_SCFG,
+	CSU_CSLX_FM = 66,
+	CSU_CSLX_SEC5_5,
+	CSU_CSLX_BM,
+	CSU_CSLX_QM,
+	CSU_CSLX_GPIO2 = 70,
+	CSU_CSLX_GPIO1,
+	CSU_CSLX_GPIO4,
+	CSU_CSLX_GPIO3,
+	CSU_CSLX_PLATFORM_CONT,
+	CSU_CSLX_CSU,
+	CSU_CSLX_IIC4 = 77,
+	CSU_CSLX_WDT4,
+	CSU_CSLX_WDT3,
+	CSU_CSLX_ESDHC2 = 80,
+	CSU_CSLX_WDT5 = 81,
+	CSU_CSLX_SAI2,
+	CSU_CSLX_SAI1,
+	CSU_CSLX_SAI4,
+	CSU_CSLX_SAI3,
+	CSU_CSLX_FTM2 = 86,
+	CSU_CSLX_FTM1,
+	CSU_CSLX_FTM4,
+	CSU_CSLX_FTM3,
+	CSU_CSLX_FTM6 = 90,
+	CSU_CSLX_FTM5,
+	CSU_CSLX_FTM8,
+	CSU_CSLX_FTM7,
+	CSU_CSLX_DSCR = 121,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/ppa.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/ppa.h
new file mode 100644
index 000000000..f0c4a84f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/ppa.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 NXP Semiconductor, Inc.
+ */
+
+#ifndef __FSL_PPA_H_
+#define __FSL_PPA_H_
+
+#ifdef CONFIG_FSL_LS_PPA
+int ppa_init(void);
+#endif
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/soc.h
new file mode 100644
index 000000000..bd41df1be
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017-2021 NXP
+ * Copyright 2015 Freescale Semiconductor
+ */
+
+#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_
+#define _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#ifdef CONFIG_FSL_LSCH2
+#include <asm/arch/immap_lsch2.h>
+#endif
+#ifdef CONFIG_FSL_LSCH3
+#include <asm/arch/immap_lsch3.h>
+#endif
+#endif
+#include <asm/arch/svr.h>
+
+#ifdef CONFIG_SYS_FSL_CCSR_GUR_LE
+#define gur_in32(a)       in_le32(a)
+#define gur_out32(a, v)   out_le32(a, v)
+#elif defined(CONFIG_SYS_FSL_CCSR_GUR_BE)
+#define gur_in32(a)       in_be32(a)
+#define gur_out32(a, v)   out_be32(a, v)
+#endif
+
+#ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define scfg_in32(a)       in_le32(a)
+#define scfg_out32(a, v)   out_le32(a, v)
+#define scfg_clrbits32(addr, clear) clrbits_le32(addr, clear)
+#define scfg_clrsetbits32(addr, clear, set) clrsetbits_le32(addr, clear, set)
+#elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE)
+#define scfg_in32(a)       in_be32(a)
+#define scfg_out32(a, v)   out_be32(a, v)
+#define scfg_clrbits32(addr, clear) clrbits_be32(addr, clear)
+#define scfg_clrsetbits32(addr, clear, set) clrsetbits_be32(addr, clear, set)
+#endif
+
+#ifdef CONFIG_SYS_FSL_PEX_LUT_LE
+#define pex_lut_in32(a)       in_le32(a)
+#define pex_lut_out32(a, v)   out_le32(a, v)
+#elif defined(CONFIG_SYS_FSL_PEX_LUT_BE)
+#define pex_lut_in32(a)       in_be32(a)
+#define pex_lut_out32(a, v)   out_be32(a, v)
+#endif
+#ifndef __ASSEMBLY__
+struct cpu_type {
+	char name[15];
+	u32 soc_ver;
+	u32 num_cores;
+};
+
+#define CPU_TYPE_ENTRY(n, v, nc) \
+	{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)}
+
+#ifdef CONFIG_TFABOOT
+#define SMC_DRAM_BANK_INFO (0xC200FF12)
+#define SIP_SVC_RCW	0xC200FF18
+
+phys_size_t tfa_get_dram_size(void);
+
+enum boot_src {
+	BOOT_SOURCE_RESERVED = 0,
+	BOOT_SOURCE_IFC_NOR,
+	BOOT_SOURCE_IFC_NAND,
+	BOOT_SOURCE_QSPI_NOR,
+	BOOT_SOURCE_QSPI_NAND,
+	BOOT_SOURCE_XSPI_NOR,
+	BOOT_SOURCE_XSPI_NAND,
+	BOOT_SOURCE_SD_MMC,
+	BOOT_SOURCE_SD_MMC2,
+	BOOT_SOURCE_I2C1_EXTENDED,
+};
+
+enum boot_src get_boot_src(void);
+#endif
+#endif
+#define SVR_WO_E		0xFFFFFE
+
+#define SVR_MAJ(svr)		(((svr) >> 4) & 0xf)
+#define SVR_MIN(svr)		(((svr) >> 0) & 0xf)
+#define SVR_REV(svr)		(((svr) >> 0) & 0xff)
+#define IS_E_PROCESSOR(svr)	(!((svr >> 8) & 0x1))
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+#define IS_C_PROCESSOR(svr)	(!((svr >> 12) & 0x1))
+#define SVR_WO_CE		0xFFFFEE
+#define SVR_SOC_VER(svr)	(((svr) >> 8) & SVR_WO_CE)
+#else
+#define SVR_SOC_VER(svr)	(((svr) >> 8) & SVR_WO_E)
+#endif
+#ifdef CONFIG_ARCH_LS1028A
+#define IS_MULTIMEDIA_EN(svr)	(!((svr >> 10) & 0x1))
+#endif
+#define IS_SVR_REV(svr, maj, min) \
+		((SVR_MAJ(svr) == (maj)) && (SVR_MIN(svr) == (min)))
+#define SVR_DEV(svr)		((svr) >> 8)
+#define IS_SVR_DEV(svr, dev)	(((svr) >> 16) == (dev))
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_FSL_LSCH3
+void fsl_lsch3_early_init_f(void);
+int get_core_volt_from_fuse(void);
+#elif defined(CONFIG_FSL_LSCH2)
+void fsl_lsch2_early_init_f(void);
+int setup_chip_volt(void);
+/* Setup core vdd in unit mV */
+int board_setup_core_volt(u32 vdd);
+#ifdef CONFIG_FSL_PFE
+void init_pfe_scfg_dcfg_regs(void);
+#endif
+#endif
+#ifdef CONFIG_QSPI_AHB_INIT
+int qspi_ahb_init(void);
+#endif
+
+#ifdef CONFIG_FSPI_AHB_EN_4BYTE
+#define SYS_NXP_FSPI_LUTCR_LOCK			0x00000001
+#define SYS_NXP_FSPI_LUTCR_UNLOCK		0x00000002
+#define SYS_NXP_FSPI_LUTKEY			0x5AF05AF0
+int fspi_ahb_init(void);
+#endif
+
+void cpu_name(char *name);
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+void erratum_a009635(void);
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+void erratum_a010315(void);
+#endif
+
+bool soc_has_dp_ddr(void);
+bool soc_has_aiop(void);
+
+#ifdef CONFIG_GIC_V3_ITS
+int ls_gic_rd_tables_init(void *blob);
+#endif
+#endif
+
+#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/speed.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/speed.h
new file mode 100644
index 000000000..26721699c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/speed.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014-2015, Freescale Semiconductor, Inc.
+ */
+
+#ifndef _FSL_LAYERSCAPE_SPEED_H
+#define _FSL_LAYERSCAPE_SPEED_H
+void get_sys_info(struct sys_info *sys_info);
+#ifdef CONFIG_SYS_DPAA_QBMAN
+unsigned long get_qman_freq(void);
+#endif
+#endif /* _FSL_LAYERSCAPE_SPEED_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h
new file mode 100644
index 000000000..1b02d484d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP Semiconductor, Inc.
+ *
+ */
+#ifndef __FSL_STREAM_ID_H
+#define __FSL_STREAM_ID_H
+
+/*
+ * Stream IDs on Chassis-2 (for example ls1043a, ls1046a, ls1012) devices
+ * are not hardwired and are programmed by sw.  There are a limited number
+ * of stream IDs available, and the partitioning of them is scenario
+ * dependent. This header defines the partitioning between legacy, PCI,
+ * and DPAA1 devices.
+ *
+ * This partitioning can be customized in this file depending
+ * on the specific hardware config:
+ *
+ *  -non-PCI legacy, platform devices (USB, SDHC, SATA, DMA, QE etc)
+ *     -all legacy devices get a unique stream ID assigned and programmed in
+ *      their AMQR registers by u-boot
+ *
+ *  -PCIe
+ *     -there is a range of stream IDs set aside for PCI in this
+ *      file.  U-boot will scan the PCI bus and for each device discovered:
+ *         -allocate a streamID
+ *         -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
+ *         -set a msi-map entry in the PEXn controller node in the
+ *          device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
+ *          for more info on the msi-map definition)
+ *         -set a iommu-map entry in the PEXn controller node in the
+ *          device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt
+ *          for more info on the iommu-map definition)
+ *
+ *  -DPAA1
+ *     - Stream ids for DPAA1 use are reserved for future usecase.
+ *
+ */
+
+
+#define FSL_INVALID_STREAM_ID		0
+
+/* legacy devices */
+#define FSL_USB1_STREAM_ID		1
+#define FSL_USB2_STREAM_ID		2
+#define FSL_USB3_STREAM_ID		3
+#define FSL_SDHC_STREAM_ID		4
+#define FSL_SATA_STREAM_ID		5
+#define FSL_QE_STREAM_ID		6
+#define FSL_QDMA_STREAM_ID		7
+#define FSL_EDMA_STREAM_ID		8
+#define FSL_ETR_STREAM_ID		9
+#define FSL_DEBUG_STREAM_ID		10
+
+/* PCI - programmed in PEXn_LUT */
+#define FSL_PEX_STREAM_ID_START		11
+#define FSL_PEX_STREAM_ID_END		26
+
+/* DPAA1 - Stream-ID that can be programmed in DPAA1 h/w */
+#define FSL_DPAA1_STREAM_ID_START	27
+#define FSL_DPAA1_STREAM_ID_END		63
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
new file mode 100644
index 000000000..b36b6d388
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2021 NXP
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ */
+#ifndef __FSL_STREAM_ID_H
+#define __FSL_STREAM_ID_H
+
+/*
+ * Stream IDs on NXP Chassis-3 (for example ls2080a, ls1088a, ls2088a)
+ * devices are not hardwired and are programmed by sw. There are a limited
+ * number of stream IDs available, and the partitioning of them is scenario
+ * dependent. This header defines the partitioning between legacy,
+ * PCI, and DPAA2 devices.
+ *
+ * This partitioning can be customized in this file depending
+ * on the specific hardware config:
+ *
+ *  -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
+ *     -all legacy devices get a unique stream ID assigned and programmed in
+ *      their AMQR registers by u-boot
+ *
+ *  -PCIe
+ *     -there is a range of stream IDs set aside for PCI in this
+ *      file.  U-boot will scan the PCI bus and for each device discovered:
+ *         -allocate a streamID
+ *         -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
+ *         -set a msi-map entry in the PEXn controller node in the
+ *          device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
+ *          for more info on the msi-map definition)
+ *         -set a iommu-map entry in the PEXn controller node in the
+ *          device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt
+ *          for more info on the iommu-map definition)
+ *
+ *  -DPAA2
+ *     -u-boot will allocate a range of stream IDs to be used by the Management
+ *      Complex for containers and will set these values in the MC DPC image.
+ *     -u-boot will fixup the iommu-map property in the fsl-mc node in the
+ *      device tree (see Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+ *      for more info on the msi-map definition)
+ *     -the MC is responsible for allocating and setting up 'isolation context
+ *      IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
+ *
+ *  - ECAM (integrated PCI)
+ *     - U-Boot applies the value here to HW and does DT fix-up for both
+ *       'iommu-map' and 'msi-map'
+ *
+ * On Chasis-3 SoCs stream IDs are programmed in AMQ registers (32-bits) for
+ * each of the different bus masters.  The relationship between
+ * the AMQ registers and stream IDs is defined in the table below:
+ *          AMQ bit    streamID bit
+ *      ---------------------------
+ *           PL[18]         9        // privilege bit
+ *          BMT[17]         8        // bypass translation
+ *           VA[16]         7        // reserved
+ *             [15]         -        // unused
+ *         ICID[14:7]       -        // unused
+ *         ICID[6:0]        6-0      // isolation context id
+ *     ----------------------------
+ *
+ */
+
+#define AMQ_PL_MASK			(0x1 << 18)   /* priviledge bit */
+#define AMQ_BMT_MASK			(0x1 << 17)   /* bypass bit */
+
+#define FSL_INVALID_STREAM_ID		0
+
+#define FSL_BYPASS_AMQ			(AMQ_PL_MASK | AMQ_BMT_MASK)
+
+/* legacy devices */
+#define FSL_USB1_STREAM_ID		1
+#define FSL_USB2_STREAM_ID		2
+#define FSL_SDMMC_STREAM_ID		3
+#define FSL_SATA1_STREAM_ID		4
+
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) || \
+	defined(CONFIG_ARCH_LX2162A)
+#define FSL_SATA2_STREAM_ID		5
+#endif
+
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) || \
+	defined(CONFIG_ARCH_LX2162A)
+#define FSL_DMA_STREAM_ID		6
+#elif defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A)
+#define FSL_DMA_STREAM_ID		5
+#endif
+
+/* PCI - programmed in PEXn_LUT */
+#define FSL_PEX_STREAM_ID_START		7
+
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1028A)
+#define FSL_PEX_STREAM_ID_END		22
+#elif defined(CONFIG_ARCH_LS1088A)
+#define FSL_PEX_STREAM_ID_END		18
+#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
+#define FSL_PEX_STREAM_ID_END          (0x100)
+#endif
+
+
+/* DPAA2 - set in MC DPC and alloced by MC */
+#define FSL_DPAA2_STREAM_ID_START	23
+#define FSL_DPAA2_STREAM_ID_END		63
+
+/* PCI IEPs, this overlaps DPAA2 but these two are exclusive at least for now */
+#define FSL_ECAM_STREAM_ID_START	41
+#define FSL_ECAM_STREAM_ID_END		63
+
+#define FSL_SEC_STREAM_ID		64
+#define FSL_SEC_JR1_STREAM_ID		65
+#define FSL_SEC_JR2_STREAM_ID		66
+#define FSL_SEC_JR3_STREAM_ID		67
+#define FSL_SEC_JR4_STREAM_ID		68
+
+#define FSL_SDMMC2_STREAM_ID		69
+
+/*
+ * Erratum A-050382 workaround
+ *
+ * Description:
+ *   The eDMA ICID programmed in the eDMA_AMQR register in DCFG is not
+ *   correctly forwarded to the SMMU.
+ * Workaround:
+ *   Program eDMA ICID in the eDMA_AMQR register in DCFG to 40.
+ */
+#ifdef CONFIG_SYS_FSL_ERRATUM_A050382
+#define FSL_EDMA_STREAM_ID		40
+#else
+#define FSL_EDMA_STREAM_ID		70
+#endif
+
+#define FSL_GPU_STREAM_ID		71
+#define FSL_DISPLAY_STREAM_ID		72
+#define FSL_SATA3_STREAM_ID		73
+#define FSL_SATA4_STREAM_ID		74
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/svr.h b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/svr.h
new file mode 100644
index 000000000..e37c4a88b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-fsl-layerscape/svr.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_SVR_H_
+#define _ASM_ARMV8_FSL_LAYERSCAPE_SVR_H_
+
+#define SVR_LS1012A		0x870400
+#define SVR_LS1043A		0x879200
+#define SVR_LS1023A		0x879208
+/* LS1043A/LS1023A 23x23 package silicon has different value of VAR_PER */
+#define SVR_LS1043A_P23		0x879202
+#define SVR_LS1023A_P23		0x87920A
+#define SVR_LS1017A		0x870B24
+#define SVR_LS1018A		0x870B20
+#define SVR_LS1027A		0x870B04
+#define SVR_LS1028A		0x870B00
+#define SVR_LS1046A		0x870700
+#define SVR_LS1026A		0x870708
+#define SVR_LS1048A		0x870320
+#define SVR_LS1084A		0x870302
+#define SVR_LS1088A		0x870300
+#define SVR_LS1044A		0x870322
+#define SVR_LS2045A		0x870120
+#define SVR_LS2080A		0x870110
+#define SVR_LS2085A		0x870100
+#define SVR_LS2040A		0x870130
+#define SVR_LS2088A		0x870900
+#define SVR_LS2084A		0x870910
+#define SVR_LS2048A		0x870920
+#define SVR_LS2044A		0x870930
+#define SVR_LS2081A		0x870918
+#define SVR_LS2041A		0x870914
+#define SVR_LX2160A		0x873600
+#define SVR_LX2120A		0x873620
+#define SVR_LX2080A		0x873602
+#define SVR_LX2162A		0x873608
+#define SVR_LX2122A		0x873628
+#define SVR_LX2082A		0x87360A
+
+#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SVR_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-hi3660/hi3660.h b/roms/u-boot/arch/arm/include/asm/arch-hi3660/hi3660.h
new file mode 100644
index 000000000..882262d13
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-hi3660/hi3660.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Linaro
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#ifndef __HI3660_H__
+#define __HI3660_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define HI3660_UART6_BASE			0xfff32000
+
+#define PMU_REG_BASE                            0xfff34000
+#define PMIC_HARDWARE_CTRL0                     (PMU_REG_BASE + (0x0C5 << 2))
+
+#define SCTRL_REG_BASE                          0xfff0a000
+#define SCTRL_SCFPLLCTRL0                       (SCTRL_REG_BASE + 0x120)
+#define SCTRL_SCFPLLCTRL0_FPLL0_EN              BIT(0)
+
+#define CRG_REG_BASE                            0xfff35000
+#define CRG_PEREN2                              (CRG_REG_BASE + 0x020)
+#define CRG_PERDIS2                             (CRG_REG_BASE + 0x024)
+#define CRG_PERCLKEN2                           (CRG_REG_BASE + 0x028)
+#define CRG_PERSTAT2                            (CRG_REG_BASE + 0x02C)
+#define CRG_PEREN4                              (CRG_REG_BASE + 0x040)
+#define CRG_PERDIS4                             (CRG_REG_BASE + 0x044)
+#define CRG_PERCLKEN4                           (CRG_REG_BASE + 0x048)
+#define CRG_PERSTAT4                            (CRG_REG_BASE + 0x04C)
+#define CRG_PERRSTEN2                           (CRG_REG_BASE + 0x078)
+#define CRG_PERRSTDIS2                          (CRG_REG_BASE + 0x07C)
+#define CRG_PERRSTSTAT2                         (CRG_REG_BASE + 0x080)
+#define CRG_PERRSTEN3                           (CRG_REG_BASE + 0x084)
+#define CRG_PERRSTDIS3                          (CRG_REG_BASE + 0x088)
+#define CRG_PERRSTSTAT3                         (CRG_REG_BASE + 0x08C)
+#define CRG_PERRSTEN4                           (CRG_REG_BASE + 0x090)
+#define CRG_PERRSTDIS4                          (CRG_REG_BASE + 0x094)
+#define CRG_PERRSTSTAT4                         (CRG_REG_BASE + 0x098)
+#define CRG_ISOEN                               (CRG_REG_BASE + 0x144)
+#define CRG_ISODIS                              (CRG_REG_BASE + 0x148)
+#define CRG_ISOSTAT                             (CRG_REG_BASE + 0x14C)
+
+#define PINMUX4_BASE				0xfff11000
+#define PINMUX4_SDDET				(PINMUX4_BASE + 0x60)
+
+#define PINCONF3_BASE				0xff37e800
+#define PINCONF3_SDCLK				(PINCONF3_BASE + 0x00)
+#define PINCONF3_SDCMD				(PINCONF3_BASE + 0x04)
+#define PINCONF3_SDDATA0			(PINCONF3_BASE + 0x08)
+#define PINCONF3_SDDATA1			(PINCONF3_BASE + 0x0c)
+#define PINCONF3_SDDATA2			(PINCONF3_BASE + 0x10)
+#define PINCONF3_SDDATA3			(PINCONF3_BASE + 0x14)
+
+#endif /*__HI3660_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h b/roms/u-boot/arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h
new file mode 100644
index 000000000..b98b45cc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Linaro
+ * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ */
+
+#ifndef __HI3798cv200_H__
+#define __HI3798cv200_H__
+
+#define REG_BASE_PERI_CTRL		0xF8A20000
+#define REG_BASE_CRG			0xF8A22000
+
+/* DEVICES */
+#define REG_BASE_UART0			0xF8B00000
+#define HIOTG_BASE_ADDR			0xF98C0000
+
+/* PERI control registers (4KB) */
+	/* USB2 PHY01 configuration register */
+#define PERI_CTRL_USB0			(REG_BASE_PERI_CTRL + 0x120)
+
+	/* USB2 controller configuration register */
+#define PERI_CTRL_USB3			(REG_BASE_PERI_CTRL + 0x12c)
+#define USB2_2P_CHIPID			(1 << 28)
+
+/* PERI CRG registers (4KB) */
+	/* USB2 CTRL0 clock and soft reset */
+#define PERI_CRG46			(REG_BASE_CRG + 0xb8)
+#define USB2_BUS_CKEN			(1<<0)
+#define USB2_OHCI48M_CKEN		(1<<1)
+#define USB2_OHCI12M_CKEN		(1<<2)
+#define USB2_OTG_UTMI_CKEN		(1<<3)
+#define USB2_HST_PHY_CKEN		(1<<4)
+#define USB2_UTMI0_CKEN			(1<<5)
+#define USB2_BUS_SRST_REQ		(1<<12)
+#define USB2_UTMI0_SRST_REQ		(1<<13)
+#define USB2_HST_PHY_SYST_REQ		(1<<16)
+#define USB2_OTG_PHY_SYST_REQ		(1<<17)
+#define USB2_CLK48_SEL			(1<<20)
+
+	/* USB2 PHY clock and soft reset */
+#define PERI_CRG47			(REG_BASE_CRG + 0xbc)
+#define USB2_PHY01_REF_CKEN		(1 << 0)
+#define USB2_PHY2_REF_CKEN		(1 << 2)
+#define USB2_PHY01_SRST_REQ		(1 << 4)
+#define USB2_PHY2_SRST_REQ		(1 << 6)
+#define USB2_PHY01_SRST_TREQ0		(1 << 8)
+#define USB2_PHY01_SRST_TREQ1		(1 << 9)
+#define USB2_PHY2_SRST_TREQ		(1 << 10)
+#define USB2_PHY01_REFCLK_SEL		(1 << 12)
+#define USB2_PHY2_REFCLK_SEL		(1 << 14)
+
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-hi6220/dwmmc.h b/roms/u-boot/arch/arm/include/asm/arch-hi6220/dwmmc.h
new file mode 100644
index 000000000..cf51c178c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-hi6220/dwmmc.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Linaro
+ * Peter Griffin <peter.griffin@linaro.org>
+ */
+
+int hi6220_dwmci_add_port(int index, u32 regbase, int bus_width);
diff --git a/roms/u-boot/arch/arm/include/asm/arch-hi6220/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-hi6220/gpio.h
new file mode 100644
index 000000000..12717a96a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-hi6220/gpio.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Linaro
+ * Peter Griffin <peter.griffin@linaro.org>
+ */
+
+#ifndef _HI6220_GPIO_H_
+#define _HI6220_GPIO_H_
+
+#define HI6220_GPIO_BASE(bank)	(((bank < 4) ? 0xf8011000 : \
+				0xf7020000 - 0x4000) + (0x1000 * bank))
+
+#define HI6220_GPIO_PER_BANK	8
+#define HI6220_GPIO_DIR		0x400
+
+struct gpio_bank {
+	u8 *base;	/* address of registers in physical memory */
+};
+
+/* Information about a GPIO bank */
+struct hikey_gpio_plat {
+	int bank_index;
+	ulong base;     /* address of registers in physical memory */
+};
+
+#endif /* _HI6220_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-hi6220/hi6220.h b/roms/u-boot/arch/arm/include/asm/arch-hi6220/hi6220.h
new file mode 100644
index 000000000..55729e306
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-hi6220/hi6220.h
@@ -0,0 +1,389 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Linaro
+ * Peter Griffin <peter.griffin@linaro.org>
+ */
+
+#ifndef __HI6220_H__
+#define __HI6220_H__
+
+#include "hi6220_regs_alwayson.h"
+
+#define HI6220_MMC0_BASE			0xF723D000
+#define HI6220_MMC1_BASE			0xF723E000
+
+#define HI6220_UART0_BASE			0xF8015000
+#define HI6220_UART3_BASE			0xF7113000
+
+#define HI6220_PMUSSI_BASE			0xF8000000
+
+#define HI6220_PERI_BASE			0xF7030000
+
+struct peri_sc_periph_regs {
+	u32 ctrl1;		/*0x0*/
+	u32 ctrl2;
+	u32 ctrl3;
+	u32 ctrl4;
+	u32 ctrl5;
+	u32 ctrl6;
+	u32 ctrl8;
+	u32 ctrl9;
+	u32 ctrl10;
+	u32 ctrl12;
+	u32 ctrl13;
+	u32 ctrl14;
+
+	u32 unknown_1[8];
+
+	u32 ddr_ctrl0;		/*0x50*/
+
+	u32 unknown_2[16];
+
+	u32 stat1;		/*0x94*/
+
+	u32 unknown_3[90];
+
+	u32 clk0_en;		/*0x200*/
+	u32 clk0_dis;
+	u32 clk0_stat;
+
+	u32 unknown_4;
+
+	u32 clk1_en;		/*0x210*/
+	u32 clk1_dis;
+	u32 clk1_stat;
+
+	u32 unknown_5;
+
+	u32 clk2_en;		/*0x220*/
+	u32 clk2_dis;
+	u32 clk2_stat;
+
+	u32 unknown_6;
+
+	u32 clk3_en;		/*0x230*/
+	u32 clk3_dis;
+	u32 clk3_stat;
+
+	u32 unknown_7;
+
+	u32 clk8_en;		/*0x240*/
+	u32 clk8_dis;
+	u32 clk8_stat;
+
+	u32 unknown_8;
+
+	u32 clk9_en;		/*0x250*/
+	u32 clk9_dis;
+	u32 clk9_stat;
+
+	u32 unknown_9;
+
+	u32 clk10_en;		/*0x260*/
+	u32 clk10_dis;
+	u32 clk10_stat;
+
+	u32 unknown_10;
+
+	u32 clk12_en;		/*0x270*/
+	u32 clk12_dis;
+	u32 clk12_stat;
+
+	u32 unknown_11[33];
+
+	u32 rst0_en;		/*0x300*/
+	u32 rst0_dis;
+	u32 rst0_stat;
+
+	u32 unknown_12;
+
+	u32 rst1_en;		/*0x310*/
+	u32 rst1_dis;
+	u32 rst1_stat;
+
+	u32 unknown_13;
+
+	u32 rst2_en;		/*0x320*/
+	u32 rst2_dis;
+	u32 rst2_stat;
+
+	u32 unknown_14;
+
+	u32 rst3_en;		/*0x330*/
+	u32 rst3_dis;
+	u32 rst3_stat;
+
+	u32 unknown_15;
+
+	u32 rst8_en;		/*0x340*/
+	u32 rst8_dis;
+	u32 rst8_stat;
+
+	u32 unknown_16[45];
+
+	u32 clk0_sel;		/*0x400*/
+
+	u32 unknown_17[36];
+
+	u32 clkcfg8bit1;	/*0x494*/
+	u32 clkcfg8bit2;
+
+	u32 unknown_18[538];
+
+	u32 reserved8_addr;	/*0xd04*/
+};
+
+
+/* CTRL1 bit definitions */
+
+#define PERI_CTRL1_ETR_AXI_CSYSREQ_N			(1 << 0)
+#define PERI_CTRL1_HIFI_INT_MASK			(1 << 1)
+#define PERI_CTRL1_HIFI_ALL_INT_MASK			(1 << 2)
+#define PERI_CTRL1_ETR_AXI_CSYSREQ_N_MSK		(1 << 16)
+#define PERI_CTRL1_HIFI_INT_MASK_MSK			(1 << 17)
+#define PERI_CTRL1_HIFI_ALL_INT_MASK_MSK		(1 << 18)
+
+
+/* CTRL2 bit definitions */
+
+#define PERI_CTRL2_MMC_CLK_PHASE_BYPASS_EN_MMC0		(1 << 0)
+#define PERI_CTRL2_MMC_CLK_PHASE_BYPASS_EN_MMC1		(1 << 2)
+#define PERI_CTRL2_NAND_SYS_MEM_SEL			(1 << 6)
+#define PERI_CTRL2_G3D_DDRT_AXI_SEL			(1 << 7)
+#define PERI_CTRL2_GU_MDM_BBP_TESTPIN_SEL		(1 << 8)
+#define PERI_CTRL2_CODEC_SSI_MASTER_CHECK		(1 << 9)
+#define PERI_CTRL2_FUNC_TEST_SOFT			(1 << 12)
+#define PERI_CTRL2_CSSYS_TS_ENABLE			(1 << 15)
+#define PERI_CTRL2_HIFI_RAMCTRL_S_EMA			(1 << 16)
+#define PERI_CTRL2_HIFI_RAMCTRL_S_EMAW			(1 << 20)
+#define PERI_CTRL2_HIFI_RAMCTRL_S_EMAS			(1 << 22)
+#define PERI_CTRL2_HIFI_RAMCTRL_S_RET1N			(1 << 26)
+#define PERI_CTRL2_HIFI_RAMCTRL_S_RET2N			(1 << 27)
+#define PERI_CTRL2_HIFI_RAMCTRL_S_PGEN			(1 << 28)
+
+/* CTRL3 bit definitions */
+
+#define PERI_CTRL3_HIFI_DDR_HARQMEM_ADDR		(1 << 0)
+#define PERI_CTRL3_HIFI_HARQMEMRMP_EN			(1 << 12)
+#define PERI_CTRL3_HARQMEM_SYS_MED_SEL			(1 << 13)
+#define PERI_CTRL3_SOC_AP_OCCUPY_GRP1			(1 << 14)
+#define PERI_CTRL3_SOC_AP_OCCUPY_GRP2			(1 << 16)
+#define PERI_CTRL3_SOC_AP_OCCUPY_GRP3			(1 << 18)
+#define PERI_CTRL3_SOC_AP_OCCUPY_GRP4			(1 << 20)
+#define PERI_CTRL3_SOC_AP_OCCUPY_GRP5			(1 << 22)
+#define PERI_CTRL3_SOC_AP_OCCUPY_GRP6			(1 << 24)
+
+/* CTRL4 bit definitions */
+
+#define PERI_CTRL4_PICO_FSELV				(1 << 0)
+#define PERI_CTRL4_FPGA_EXT_PHY_SEL			(1 << 3)
+#define PERI_CTRL4_PICO_REFCLKSEL			(1 << 4)
+#define PERI_CTRL4_PICO_SIDDQ				(1 << 6)
+#define PERI_CTRL4_PICO_SUSPENDM_SLEEPM			(1 << 7)
+#define PERI_CTRL4_PICO_OGDISABLE			(1 << 8)
+#define PERI_CTRL4_PICO_COMMONONN			(1 << 9)
+#define PERI_CTRL4_PICO_VBUSVLDEXT			(1 << 10)
+#define PERI_CTRL4_PICO_VBUSVLDEXTSEL			(1 << 11)
+#define PERI_CTRL4_PICO_VATESTENB			(1 << 12)
+#define PERI_CTRL4_PICO_SUSPENDM			(1 << 14)
+#define PERI_CTRL4_PICO_SLEEPM				(1 << 15)
+#define PERI_CTRL4_BC11_C				(1 << 16)
+#define PERI_CTRL4_BC11_B				(1 << 17)
+#define PERI_CTRL4_BC11_A				(1 << 18)
+#define PERI_CTRL4_BC11_GND				(1 << 19)
+#define PERI_CTRL4_BC11_FLOAT				(1 << 20)
+#define PERI_CTRL4_OTG_PHY_SEL				(1 << 21)
+#define PERI_CTRL4_USB_OTG_SS_SCALEDOWN_MODE		(1 << 22)
+#define PERI_CTRL4_OTG_DM_PULLDOWN			(1 << 24)
+#define PERI_CTRL4_OTG_DP_PULLDOWN			(1 << 25)
+#define PERI_CTRL4_OTG_IDPULLUP				(1 << 26)
+#define PERI_CTRL4_OTG_DRVBUS				(1 << 27)
+#define PERI_CTRL4_OTG_SESSEND				(1 << 28)
+#define PERI_CTRL4_OTG_BVALID				(1 << 29)
+#define PERI_CTRL4_OTG_AVALID				(1 << 30)
+#define PERI_CTRL4_OTG_VBUSVALID			(1 << 31)
+
+/* CTRL5 bit definitions */
+
+#define PERI_CTRL5_USBOTG_RES_SEL			(1 << 3)
+#define PERI_CTRL5_PICOPHY_ACAENB			(1 << 4)
+#define PERI_CTRL5_PICOPHY_BC_MODE			(1 << 5)
+#define PERI_CTRL5_PICOPHY_CHRGSEL			(1 << 6)
+#define PERI_CTRL5_PICOPHY_VDATSRCEND			(1 << 7)
+#define PERI_CTRL5_PICOPHY_VDATDETENB			(1 << 8)
+#define PERI_CTRL5_PICOPHY_DCDENB			(1 << 9)
+#define PERI_CTRL5_PICOPHY_IDDIG			(1 << 10)
+#define PERI_CTRL5_DBG_MUX				(1 << 11)
+
+/* CTRL6 bit definitions */
+
+#define PERI_CTRL6_CSSYSOFF_RAMCTRL_S_EMA		(1 << 0)
+#define PERI_CTRL6_CSSYSOFF_RAMCTRL_S_EMAW		(1 << 4)
+#define PERI_CTRL6_CSSYSOFF_RAMCTRL_S_EMAS		(1 << 6)
+#define PERI_CTRL6_CSSYSOFF_RAMCTRL_S_RET1N		(1 << 10)
+#define PERI_CTRL6_CSSYSOFF_RAMCTRL_S_RET2N		(1 << 11)
+#define PERI_CTRL6_CSSYSOFF_RAMCTRL_S_PGEN		(1 << 12)
+
+/* CTRL8 bit definitions */
+
+#define PERI_CTRL8_PICOPHY_TXRISETUNE0			(1 << 0)
+#define PERI_CTRL8_PICOPHY_TXPREEMPAMPTUNE0		(1 << 2)
+#define PERI_CTRL8_PICOPHY_TXRESTUNE0			(1 << 4)
+#define PERI_CTRL8_PICOPHY_TXHSSVTUNE0			(1 << 6)
+#define PERI_CTRL8_PICOPHY_COMPDISTUNE0			(1 << 8)
+#define PERI_CTRL8_PICOPHY_TXPREEMPPULSETUNE0		(1 << 11)
+#define PERI_CTRL8_PICOPHY_OTGTUNE0			(1 << 12)
+#define PERI_CTRL8_PICOPHY_SQRXTUNE0			(1 << 16)
+#define PERI_CTRL8_PICOPHY_TXVREFTUNE0			(1 << 20)
+#define PERI_CTRL8_PICOPHY_TXFSLSTUNE0			(1 << 28)
+
+/* CTRL9 bit definitions */
+
+#define PERI_CTRL9_PICOPLY_TESTCLKEN			(1 << 0)
+#define PERI_CTRL9_PICOPLY_TESTDATAOUTSEL		(1 << 1)
+#define PERI_CTRL9_PICOPLY_TESTADDR			(1 << 4)
+#define PERI_CTRL9_PICOPLY_TESTDATAIN			(1 << 8)
+
+/* CLK0 EN/DIS/STAT bit definitions */
+
+#define PERI_CLK0_MMC0					(1 << 0)
+#define PERI_CLK0_MMC1					(1 << 1)
+#define PERI_CLK0_MMC2					(1 << 2)
+#define PERI_CLK0_NANDC					(1 << 3)
+#define PERI_CLK0_USBOTG				(1 << 4)
+#define PERI_CLK0_PICOPHY				(1 << 5)
+#define PERI_CLK0_PLL					(1 << 6)
+
+/* CLK1 EN/DIS/STAT bit definitions */
+
+#define PERI_CLK1_HIFI					(1 << 0)
+#define PERI_CLK1_DIGACODEC				(1 << 5)
+
+/* CLK2 EN/DIS/STAT bit definitions */
+
+#define PERI_CLK2_IPF					(1 << 0)
+#define PERI_CLK2_SOCP					(1 << 1)
+#define PERI_CLK2_DMAC					(1 << 2)
+#define PERI_CLK2_SECENG				(1 << 3)
+#define PERI_CLK2_HPM0					(1 << 5)
+#define PERI_CLK2_HPM1					(1 << 6)
+#define PERI_CLK2_HPM2					(1 << 7)
+#define PERI_CLK2_HPM3					(1 << 8)
+
+/* CLK8 EN/DIS/STAT bit definitions */
+
+#define PERI_CLK8_RS0					(1 << 0)
+#define PERI_CLK8_RS2					(1 << 1)
+#define PERI_CLK8_RS3					(1 << 2)
+#define PERI_CLK8_MS0					(1 << 3)
+#define PERI_CLK8_MS2					(1 << 5)
+#define PERI_CLK8_XG2RAM0				(1 << 6)
+#define PERI_CLK8_X2SRAM				(1 << 7)
+#define PERI_CLK8_SRAM					(1 << 8)
+#define PERI_CLK8_ROM					(1 << 9)
+#define PERI_CLK8_HARQ					(1 << 10)
+#define PERI_CLK8_MMU					(1 << 11)
+#define PERI_CLK8_DDRC					(1 << 12)
+#define PERI_CLK8_DDRPHY				(1 << 13)
+#define PERI_CLK8_DDRPHY_REF				(1 << 14)
+#define PERI_CLK8_X2X_SYSNOC				(1 << 15)
+#define PERI_CLK8_X2X_CCPU				(1 << 16)
+#define PERI_CLK8_DDRT					(1 << 17)
+#define PERI_CLK8_DDRPACK_RS				(1 << 18)
+
+/* CLK9 EN/DIS/STAT bit definitions */
+
+#define PERI_CLK9_CARM_DAP				(1 << 0)
+#define PERI_CLK9_CARM_ATB				(1 << 1)
+#define PERI_CLK9_CARM_LBUS				(1 << 2)
+#define PERI_CLK9_CARM_KERNEL				(1 << 3)
+
+/* CLK10 EN/DIS/STAT bit definitions */
+
+#define PERI_CLK10_IPF_CCPU				(1 << 0)
+#define PERI_CLK10_SOCP_CCPU				(1 << 1)
+#define PERI_CLK10_SECENG_CCPU				(1 << 2)
+#define PERI_CLK10_HARQ_CCPU				(1 << 3)
+#define PERI_CLK10_IPF_MCU				(1 << 16)
+#define PERI_CLK10_SOCP_MCU				(1 << 17)
+#define PERI_CLK10_SECENG_MCU				(1 << 18)
+#define PERI_CLK10_HARQ_MCU				(1 << 19)
+
+/* CLK12 EN/DIS/STAT bit definitions */
+
+#define PERI_CLK12_HIFI_SRC				(1 << 0)
+#define PERI_CLK12_MMC0_SRC				(1 << 1)
+#define PERI_CLK12_MMC1_SRC				(1 << 2)
+#define PERI_CLK12_MMC2_SRC				(1 << 3)
+#define PERI_CLK12_SYSPLL_DIV				(1 << 4)
+#define PERI_CLK12_TPIU_SRC				(1 << 5)
+#define PERI_CLK12_MMC0_HF				(1 << 6)
+#define PERI_CLK12_MMC1_HF				(1 << 7)
+#define PERI_CLK12_PLL_TEST_SRC				(1 << 8)
+#define PERI_CLK12_CODEC_SOC				(1 << 9)
+#define PERI_CLK12_MEDIA				(1 << 10)
+
+/* RST0 EN/DIS/STAT bit definitions */
+
+#define PERI_RST0_MMC0					(1 << 0)
+#define PERI_RST0_MMC1					(1 << 1)
+#define PERI_RST0_MMC2					(1 << 2)
+#define PERI_RST0_NANDC					(1 << 3)
+#define PERI_RST0_USBOTG_BUS				(1 << 4)
+#define PERI_RST0_POR_PICOPHY				(1 << 5)
+#define PERI_RST0_USBOTG				(1 << 6)
+#define PERI_RST0_USBOTG_32K				(1 << 7)
+
+/* RST1 EN/DIS/STAT bit definitions */
+
+#define PERI_RST1_HIFI					(1 << 0)
+#define PERI_RST1_DIGACODEC				(1 << 5)
+
+/* RST2 EN/DIS/STAT bit definitions */
+
+#define PERI_RST2_IPF					(1 << 0)
+#define PERI_RST2_SOCP					(1 << 1)
+#define PERI_RST2_DMAC					(1 << 2)
+#define PERI_RST2_SECENG				(1 << 3)
+#define PERI_RST2_ABB					(1 << 4)
+#define PERI_RST2_HPM0					(1 << 5)
+#define PERI_RST2_HPM1					(1 << 6)
+#define PERI_RST2_HPM2					(1 << 7)
+#define PERI_RST2_HPM3					(1 << 8)
+
+/* RST3 EN/DIS/STAT bit definitions */
+
+#define PERI_RST3_CSSYS					(1 << 0)
+#define PERI_RST3_I2C0					(1 << 1)
+#define PERI_RST3_I2C1					(1 << 2)
+#define PERI_RST3_I2C2					(1 << 3)
+#define PERI_RST3_I2C3					(1 << 4)
+#define PERI_RST3_UART1					(1 << 5)
+#define PERI_RST3_UART2					(1 << 6)
+#define PERI_RST3_UART3					(1 << 7)
+#define PERI_RST3_UART4					(1 << 8)
+#define PERI_RST3_SSP					(1 << 9)
+#define PERI_RST3_PWM					(1 << 10)
+#define PERI_RST3_BLPWM					(1 << 11)
+#define PERI_RST3_TSENSOR				(1 << 12)
+#define PERI_RST3_DAPB					(1 << 18)
+#define PERI_RST3_HKADC					(1 << 19)
+#define PERI_RST3_CODEC					(1 << 20)
+
+/* RST8 EN/DIS/STAT bit definitions */
+
+#define PERI_RST8_RS0					(1 << 0)
+#define PERI_RST8_RS2					(1 << 1)
+#define PERI_RST8_RS3					(1 << 2)
+#define PERI_RST8_MS0					(1 << 3)
+#define PERI_RST8_MS2					(1 << 5)
+#define PERI_RST8_XG2RAM0				(1 << 6)
+#define PERI_RST8_X2SRAM_TZMA				(1 << 7)
+#define PERI_RST8_SRAM					(1 << 8)
+#define PERI_RST8_HARQ					(1 << 10)
+#define PERI_RST8_DDRC					(1 << 12)
+#define PERI_RST8_DDRC_APB				(1 << 13)
+#define PERI_RST8_DDRPACK_APB				(1 << 14)
+#define PERI_RST8_DDRT					(1 << 17)
+
+#endif /*__HI62220_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-hi6220/hi6220_regs_alwayson.h b/roms/u-boot/arch/arm/include/asm/arch-hi6220/hi6220_regs_alwayson.h
new file mode 100644
index 000000000..4b9a0d44a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-hi6220/hi6220_regs_alwayson.h
@@ -0,0 +1,419 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Linaro
+ * Peter Griffin <peter.griffin@linaro.org>
+ */
+
+#ifndef __HI6220_ALWAYSON_H__
+#define __HI6220_ALWAYSON_H__
+
+#define ALWAYSON_CTRL_BASE			0xF7800000
+
+struct alwayson_sc_regs {
+	u32 ctrl0;		/*0x0*/
+	u32 ctrl1;
+	u32 ctrl2;
+
+	u32 unknown;
+
+	u32 stat0;		/*0x10*/
+	u32 stat1;
+	u32 mcu_imctrl;
+	u32 mcu_imstat;
+
+	u32 unknown_1[9];
+
+	u32 secondary_int_en0;	/*0x44*/
+	u32 secondary_int_statr0;
+	u32 secondary_int_statm0;
+
+	u32 unknown_2;
+
+	u32 mcu_wkup_int_en6;	/*0x54*/
+	u32 mcu_wkup_int_statr6;
+	u32 mcu_wkup_int_statm6;
+
+	u32 unknown_3;
+
+	u32 mcu_wkup_int_en5;	/*0x64*/
+	u32 mcu_wkup_int_statr5;
+	u32 mcu_wkup_int_statm5;
+
+	u32 unknown_4[9];
+
+	u32 mcu_wkup_int_en4;	/*0x94*/
+	u32 mcu_wkup_int_statr4;
+	u32 mcu_wkup_int_statm4;
+
+	u32 unknown_5[2];
+
+	u32 mcu_wkup_int_en0;	/*0xa8*/
+	u32 mcu_wkup_int_statr0;
+	u32 mcu_wkup_int_statm0;
+
+	u32 mcu_wkup_int_en1;	/*0xb4*/
+	u32 mcu_wkup_int_statr1;
+	u32 mcu_wkup_int_statm1;
+
+	u32 unknown_6;
+
+	u32 int_statr;		/*0xc4*/
+	u32 int_statm;
+	u32 int_clear;
+
+	u32 int_en_set;		/*0xd0*/
+	u32 int_en_dis;
+	u32 int_en_stat;
+
+	u32 unknown_7[2];
+
+	u32 int_statr1;		/*0xc4*/
+	u32 int_statm1;
+	u32 int_clear1;
+
+	u32 int_en_set1;	/*0xf0*/
+	u32 int_en_dis1;
+	u32 int_en_stat1;
+
+	u32 unknown_8[53];
+
+	u32 timer_en0;		/*0x1d0*/
+	u32 timer_en1;
+
+	u32 unknown_9[6];
+
+	u32 timer_en4;		/*0x1f0*/
+	u32 timer_en5;
+
+	u32 unknown_10[130];
+
+	u32 mcu_subsys_ctrl0;	/*0x400*/
+	u32 mcu_subsys_ctrl1;
+	u32 mcu_subsys_ctrl2;
+	u32 mcu_subsys_ctrl3;
+	u32 mcu_subsys_ctrl4;
+	u32 mcu_subsys_ctrl5;
+	u32 mcu_subsys_ctrl6;
+	u32 mcu_subsys_ctrl7;
+
+	u32 unknown_10_1[8];
+
+	u32 mcu_subsys_stat0;	/*0x440*/
+	u32 mcu_subsys_stat1;
+	u32 mcu_subsys_stat2;
+	u32 mcu_subsys_stat3;
+	u32 mcu_subsys_stat4;
+	u32 mcu_subsys_stat5;
+	u32 mcu_subsys_stat6;
+	u32 mcu_subsys_stat7;
+
+	u32 unknown_11[116];
+
+	u32 clk4_en;		/*0x630*/
+	u32 clk4_dis;
+	u32 clk4_stat;
+
+	u32 clk5_en;		/*0x63c*/
+	u32 clk5_dis;
+	u32 clk5_stat;
+
+	u32 unknown_12[42];
+
+	u32 rst4_en;		/*0x6f0*/
+	u32 rst4_dis;
+	u32 rst4_stat;
+
+	u32 rst5_en;		/*0x6fc*/
+	u32 rst5_dis;
+	u32 rst5_stat;
+
+	u32 unknown_13[62];
+
+	u32 pw_clk0_en;		/*0x800*/
+	u32 pw_clk0_dis;
+	u32 pw_clk0_stat;
+
+	u32 unknown_13_1;
+
+	u32 pw_rst0_en;		/*0x810*/
+	u32 pw_rst0_dis;
+	u32 pw_rst0_stat;
+
+	u32 unknown_14;
+
+	u32 pw_isoen0;		/*0x820*/
+	u32 pw_isodis0;
+	u32 pw_iso_stat0;
+
+	u32 unknown_14_1;
+
+	u32 pw_mtcmos_en0;	/*0x830*/
+	u32 pw_mtcmos_dis0;
+	u32 pw_mtcmos_stat0;
+	u32 pw_mtcmos_ack_stat0;
+	u32 pw_mtcmos_timeout_stat0;
+
+	u32 unknown_14_2[3];
+
+	u32 pw_stat0;		/*0x850*/
+	u32 pw_stat1;
+
+	u32 unknown_15[10];
+
+	u32 systest_stat;	/*0x880*/
+
+	u32 unknown_16[3];
+
+	u32 systest_slicer_cnt0;/*0x890*/
+	u32 systest_slicer_cnt1;
+
+	u32 unknown_17[12];
+
+	u32 pw_ctrl1;		/*0x8C8*/
+	u32 pw_ctrl;
+
+	u32 mcpu_voteen;
+	u32 mcpu_votedis;
+	u32 mcpu_votestat;
+
+	u32 unknown_17_1;
+
+	u32 mcpu_vote_msk0;	/*0x8E0*/
+	u32 mcpu_vote_msk1;
+	u32 mcpu_votestat0_msk;
+	u32 mcpu_votestat1_msk;
+
+	u32 peri_voteen;	/*0x8F0*/
+	u32 peri_votedis;
+	u32 peri_votestat;
+
+	u32 unknown_17_2;
+
+	u32 peri_vote_msk0;	/*0x900*/
+	u32 peri_vote_msk1;
+	u32 peri_votestat0_msk;
+	u32 erpi_votestat1_msk;
+	u32 acpu_voteen;
+	u32 acpu_votedis;
+	u32 acpu_votestat;
+
+	u32 unknown_18;
+
+	u32 acpu_vote_msk0;	/*0x920*/
+	u32 acpu_vote_msk1;
+	u32 acpu_votestat0_msk;
+	u32 acpu_votestat1_msk;
+	u32 mcu_voteen;
+	u32 mcu_votedis;
+	u32 mcu_votestat;
+
+	u32 unknown_18_1;
+
+	u32 mcu_vote_msk0;	/*0x940*/
+	u32 mcu_vote_msk1;
+	u32 mcu_vote_votestat0_msk;
+	u32 mcu_vote_votestat1_msk;
+
+	u32 unknown_18_1_2[4];
+
+	u32 mcu_vote_vote1en;	/*0x960*/
+	u32 mcu_vote_vote1dis;
+	u32 mcu_vote_vote1stat;
+
+	u32 unknown_18_2;
+
+	u32 mcu_vote_vote1_msk0;/*0x970*/
+	u32 mcu_vote_vote1_msk1;
+	u32 mcu_vote_vote1stat0_msk;
+	u32 mcu_vote_vote1stat1_msk;
+	u32 mcu_vote_vote2en;
+	u32 mcu_vote_vote2dis;
+	u32 mcu_vote_vote2stat;
+
+	u32 unknown_18_3;
+
+	u32 mcu_vote2_msk0;	/*0x990*/
+	u32 mcu_vote2_msk1;
+	u32 mcu_vote2stat0_msk;
+	u32 mcu_vote2stat1_msk;
+	u32 vote_ctrl;
+	u32 vote_stat;		/*0x9a4*/
+
+	u32 unknown_19[342];
+
+	u32 econum;		/*0xf00*/
+
+	u32 unknown_20_1[3];
+
+	u32 scchipid;		/*0xf10*/
+
+	u32 unknown_20_2[2];
+
+	u32 scsocid;		/*0xf1c*/
+
+	u32 unknown_20[48];
+
+	u32 soc_fpga_rtl_def;	/*0xfe0*/
+	u32 soc_fpga_pr_def;
+	u32 soc_fpga_res_def0;
+	u32 soc_fpga_res_def1;	/*0xfec*/
+};
+
+/* ctrl0 bit definitions */
+
+#define ALWAYSON_SC_SYS_CTRL0_MODE_NORMAL			0x004
+#define ALWAYSON_SC_SYS_CTRL0_MODE_MASK				0x007
+
+/* ctrl1 bit definitions */
+
+#define ALWAYSON_SC_SYS_CTRL1_AARM_WD_RST_CFG			(1 << 0)
+#define ALWAYSON_SC_SYS_CTRL1_REMAP_SRAM_AARM			(1 << 1)
+#define ALWAYSON_SC_SYS_CTRL1_EFUSEC_REMAP			(1 << 2)
+#define ALWAYSON_SC_SYS_CTRL1_EXT_PLL_SEL			(1 << 3)
+#define ALWAYSON_SC_SYS_CTRL1_MCU_WDG0_RSTMCU_CFG		(1 << 4)
+#define ALWAYSON_SC_SYS_CTRL1_USIM0_HPD_DE_BOUNCE_CFG		(1 << 6)
+#define ALWAYSON_SC_SYS_CTRL1_USIM0_HPD_OE_CFG			(1 << 7)
+#define ALWAYSON_SC_SYS_CTRL1_USIM1_HPD_DE_BOUNCE_CFG		(1 << 8)
+#define ALWAYSON_SC_SYS_CTRL1_USIM1_HPD_OE_CFG			(1 << 9)
+#define ALWAYSON_SC_SYS_CTRL1_BUS_DFS_FORE_HD_CFG		(1 << 10)
+#define ALWAYSON_SC_SYS_CTRL1_BUS_DFS_FORE_HD_CFG1		(1 << 11)
+#define ALWAYSON_SC_SYS_CTRL1_USIM0_HPD_OE_SFT			(1 << 12)
+#define ALWAYSON_SC_SYS_CTRL1_USIM1_HPD_OE_SFT			(1 << 13)
+#define ALWAYSON_SC_SYS_CTRL1_MCU_CLKEN_HARDCFG			(1 << 15)
+#define ALWAYSON_SC_SYS_CTRL1_AARM_WD_RST_CFG_MSK		(1 << 16)
+#define ALWAYSON_SC_SYS_CTRL1_REMAP_SRAM_AARM_MSK		(1 << 17)
+#define ALWAYSON_SC_SYS_CTRL1_EFUSEC_REMAP_MSK			(1 << 18)
+#define ALWAYSON_SC_SYS_CTRL1_EXT_PLL_SEL_MSK			(1 << 19)
+#define ALWAYSON_SC_SYS_CTRL1_MCU_WDG0_RSTMCU_CFG_MSK		(1 << 20)
+#define ALWAYSON_SC_SYS_CTRL1_USIM0_HPD_DE_BOUNCE_CFG_MSK	(1 << 22)
+#define ALWAYSON_SC_SYS_CTRL1_USIM0_HPD_OE_CFG_MSK		(1 << 23)
+#define ALWAYSON_SC_SYS_CTRL1_USIM1_HPD_DE_BOUNCE_CFG_MSK	(1 << 24)
+#define ALWAYSON_SC_SYS_CTRL1_USIM1_HPD_OE_CFG_MSK		(1 << 25)
+#define ALWAYSON_SC_SYS_CTRL1_BUS_DFS_FORE_HD_CFG_MSK		(1 << 26)
+#define ALWAYSON_SC_SYS_CTRL1_BUS_DFS_FORE_HD_CFG1_MSK		(1 << 27)
+#define ALWAYSON_SC_SYS_CTRL1_USIM0_HPD_OE_SFT_MSK		(1 << 28)
+#define ALWAYSON_SC_SYS_CTRL1_USIM1_HPD_OE_SFT_MSK		(1 << 29)
+#define ALWAYSON_SC_SYS_CTRL1_MCU_CLKEN_HARDCFG_MSK		(1 << 31)
+
+/* ctrl2 bit definitions */
+
+#define ALWAYSON_SC_SYS_CTRL2_MCU_SFT_RST_STAT_CLEAR		(1 << 26)
+#define ALWAYSON_SC_SYS_CTRL2_MCU_WDG0_RST_STAT_CLEAR		(1 << 27)
+#define ALWAYSON_SC_SYS_CTRL2_TSENSOR_RST_STAT_CLEAR		(1 << 28)
+#define ALWAYSON_SC_SYS_CTRL2_ACPU_WDG_RST_STAT_CLEAR		(1 << 29)
+#define ALWAYSON_SC_SYS_CTRL2_MCU_WDG1_RST_STAT_CLEAR		(1 << 30)
+#define ALWAYSON_SC_SYS_CTRL2_GLB_SRST_STAT_CLEAR		(1 << 31)
+
+/* stat0 bit definitions */
+
+#define ALWAYSON_SC_SYS_STAT0_MCU_RST_STAT			(1 << 25)
+#define ALWAYSON_SC_SYS_STAT0_MCU_SOFTRST_STAT			(1 << 26)
+#define ALWAYSON_SC_SYS_STAT0_MCU_WDGRST_STAT			(1 << 27)
+#define ALWAYSON_SC_SYS_STAT0_TSENSOR_HARDRST_STAT		(1 << 28)
+#define ALWAYSON_SC_SYS_STAT0_ACPU_WD_GLB_RST_STAT		(1 << 29)
+#define ALWAYSON_SC_SYS_STAT0_CM3_WDG1_RST_STAT			(1 << 30)
+#define ALWAYSON_SC_SYS_STAT0_GLB_SRST_STAT			(1 << 31)
+
+/* stat1 bit definitions */
+
+#define ALWAYSON_SC_SYS_STAT1_MODE_STATUS			(1 << 0)
+#define ALWAYSON_SC_SYS_STAT1_BOOT_SEL_LOCK			(1 << 16)
+#define ALWAYSON_SC_SYS_STAT1_FUNC_MODE_LOCK			(1 << 17)
+#define ALWAYSON_SC_SYS_STAT1_BOOT_MODE_LOCK			(1 << 19)
+#define ALWAYSON_SC_SYS_STAT1_FUN_JTAG_MODE_OUT			(1 << 20)
+#define ALWAYSON_SC_SYS_STAT1_SECURITY_BOOT_FLG			(1 << 27)
+#define ALWAYSON_SC_SYS_STAT1_EFUSE_NANDBOOT_MSK		(1 << 28)
+#define ALWAYSON_SC_SYS_STAT1_EFUSE_NAND_BITWIDE		(1 << 29)
+
+/* ctrl3 bit definitions */
+
+#define ALWAYSON_SC_MCU_SUBSYS_CTRL3_RCLK_3			0x003
+#define ALWAYSON_SC_MCU_SUBSYS_CTRL3_RCLK_MASK			0x007
+#define ALWAYSON_SC_MCU_SUBSYS_CTRL3_CSSYS_CTRL_PROT		(1 << 3)
+#define ALWAYSON_SC_MCU_SUBSYS_CTRL3_TCXO_AFC_OEN_CRG		(1 << 4)
+#define ALWAYSON_SC_MCU_SUBSYS_CTRL3_AOB_IO_SEL18_USIM1		(1 << 8)
+#define ALWAYSON_SC_MCU_SUBSYS_CTRL3_AOB_IO_SEL18_USIM0		(1 << 9)
+#define ALWAYSON_SC_MCU_SUBSYS_CTRL3_AOB_IO_SEL18_SD		(1 << 10)
+#define ALWAYSON_SC_MCU_SUBSYS_CTRL3_MCU_SUBSYS_CTRL3_RESERVED	(1 << 11)
+
+/* clk4_en bit definitions */
+
+#define ALWAYSON_SC_PERIPH_CLK4_EN_HCLK_MCU			(1 << 0)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_CLK_MCU_DAP			(1 << 3)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_CM3_TIMER0		(1 << 4)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_CM3_TIMER1		(1 << 5)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_CM3_WDT0		(1 << 6)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_CM3_WDT1		(1 << 7)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_HCLK_IPC_S			(1 << 8)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_HCLK_IPC_NS			(1 << 9)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_EFUSEC			(1 << 10)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TZPC			(1 << 11)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_WDT0			(1 << 12)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_WDT1			(1 << 13)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_WDT2			(1 << 14)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER0			(1 << 15)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER1			(1 << 16)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER2			(1 << 17)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER3			(1 << 18)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER4			(1 << 19)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER5			(1 << 20)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER6			(1 << 21)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER7			(1 << 22)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_TIMER8			(1 << 23)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_CLK_UART0			(1 << 24)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_CLK_RTC0			(1 << 25)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_CLK_RTC1			(1 << 26)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_PCLK_PMUSSI			(1 << 27)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_CLK_JTAG_AUTH		(1 << 28)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_CLK_CS_DAPB_ON		(1 << 29)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_CLK_PDM			(1 << 30)
+#define ALWAYSON_SC_PERIPH_CLK4_EN_CLK_SSI_PAD			(1 << 31)
+
+/* clk5_en bit definitions */
+
+#define ALWAYSON_SC_PERIPH_CLK5_EN_PCLK_PMUSSI_CCPU		(1 << 0)
+#define ALWAYSON_SC_PERIPH_CLK5_EN_PCLK_EFUSEC_CCPU		(1 << 1)
+#define ALWAYSON_SC_PERIPH_CLK5_EN_HCLK_IPC_CCPU		(1 << 2)
+#define ALWAYSON_SC_PERIPH_CLK5_EN_HCLK_IPC_NS_CCPU		(1 << 3)
+#define ALWAYSON_SC_PERIPH_CLK5_EN_PCLK_PMUSSI_MCU		(1 << 16)
+#define ALWAYSON_SC_PERIPH_CLK5_EN_PCLK_EFUSEC_MCU		(1 << 17)
+#define ALWAYSON_SC_PERIPH_CLK5_EN_HCLK_IPC_MCU			(1 << 18)
+#define ALWAYSON_SC_PERIPH_CLK5_EN_HCLK_IPC_NS_MCU		(1 << 19)
+
+/* rst4_dis bit definitions */
+
+#define ALWAYSON_SC_PERIPH_RST4_DIS_RESET_MCU_ECTR_N		(1 << 0)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_RESET_MCU_SYS_N		(1 << 1)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_RESET_MCU_POR_N		(1 << 2)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_RESET_MCU_DAP_N		(1 << 3)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_CM3_TIMER0_N		(1 << 4)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_CM3_TIMER1_N		(1 << 5)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_CM3_WDT0_N		(1 << 6)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_CM3_WDT1_N		(1 << 7)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_HRESET_IPC_S_N		(1 << 8)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_HRESET_IPC_NS_N		(1 << 9)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_EFUSEC_N		(1 << 10)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_WDT0_N		(1 << 12)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_WDT1_N		(1 << 13)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_WDT2_N		(1 << 14)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER0_N		(1 << 15)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER1_N		(1 << 16)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER2_N		(1 << 17)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER3_N		(1 << 18)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER4_N		(1 << 19)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER5_N		(1 << 20)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER6_N		(1 << 21)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER7_N		(1 << 22)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_TIMER8_N		(1 << 23)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_UART0_N		(1 << 24)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_RESET_RTC0_N		(1 << 25)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_RESET_RTC1_N		(1 << 26)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_PRESET_PMUSSI_N		(1 << 27)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_RESET_JTAG_AUTH_N		(1 << 28)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_RESET_CS_DAPB_ON_N		(1 << 29)
+#define ALWAYSON_SC_PERIPH_RST4_DIS_MDM_SUBSYS_GLB		(1 << 30)
+
+#define PCLK_TIMER1						(1 << 16)
+#define PCLK_TIMER0						(1 << 15)
+
+#endif /* __HI6220_ALWAYSON_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-hi6220/periph.h b/roms/u-boot/arch/arm/include/asm/arch-hi6220/periph.h
new file mode 100644
index 000000000..edec21388
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-hi6220/periph.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Linaro
+ * Peter Griffin <peter.griffin@linaro.org>
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+	PERIPH_ID_UART0 = 36,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+	PERIPH_ID_UART3,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_SDMMC0 = 72,
+	PERIPH_ID_SDMMC1,
+
+	PERIPH_ID_NONE = -1,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-hi6220/pinmux.h b/roms/u-boot/arch/arm/include/asm/arch-hi6220/pinmux.h
new file mode 100644
index 000000000..b4a9957e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-hi6220/pinmux.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Linaro
+ * Peter Griffin <peter.griffin@linaro.org>
+ */
+
+#ifndef __ASM_ARM_ARCH_PINMUX_H
+#define __ASM_ARM_ARCH_PINMUX_H
+
+#include "periph.h"
+
+
+/* iomg bit definition */
+#define MUX_M0          0
+#define MUX_M1          1
+#define MUX_M2          2
+#define MUX_M3          3
+#define MUX_M4          4
+#define MUX_M5          5
+#define MUX_M6          6
+#define MUX_M7          7
+
+/* iocg bit definition */
+#define PULL_MASK       (3)
+#define PULL_DIS        (0)
+#define PULL_UP         (1 << 0)
+#define PULL_DOWN       (1 << 1)
+
+/* drive strength definition */
+#define DRIVE_MASK      (7 << 4)
+#define DRIVE1_02MA     (0 << 4)
+#define DRIVE1_04MA     (1 << 4)
+#define DRIVE1_08MA     (2 << 4)
+#define DRIVE1_10MA     (3 << 4)
+#define DRIVE2_02MA     (0 << 4)
+#define DRIVE2_04MA     (1 << 4)
+#define DRIVE2_08MA     (2 << 4)
+#define DRIVE2_10MA     (3 << 4)
+#define DRIVE3_04MA     (0 << 4)
+#define DRIVE3_08MA     (1 << 4)
+#define DRIVE3_12MA     (2 << 4)
+#define DRIVE3_16MA     (3 << 4)
+#define DRIVE3_20MA     (4 << 4)
+#define DRIVE3_24MA     (5 << 4)
+#define DRIVE3_32MA     (6 << 4)
+#define DRIVE3_40MA     (7 << 4)
+#define DRIVE4_02MA     (0 << 4)
+#define DRIVE4_04MA     (2 << 4)
+#define DRIVE4_08MA     (4 << 4)
+#define DRIVE4_10MA     (6 << 4)
+
+#define HI6220_PINMUX0_BASE 0xf7010000
+#define HI6220_PINMUX1_BASE 0xf7010800
+
+#ifndef	__ASSEMBLY__
+
+/* maybe more registers, but highest used is 123 */
+#define REG_NUM 123
+
+struct hi6220_pinmux0_regs {
+	uint32_t	iomg[REG_NUM];
+};
+
+struct hi6220_pinmux1_regs {
+	uint32_t	iocfg[REG_NUM];
+};
+
+#endif
+
+/**
+ * Configures the pinmux for a particular peripheral.
+ *
+ * This function will configure the peripheral pinmux along with
+ * pull-up/down and drive strength.
+ *
+ * @param peripheral	peripheral to be configured
+ * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
+ */
+int hi6220_pinmux_config(int peripheral);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-imx/cpu.h
new file mode 100644
index 000000000..267a094e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx/cpu.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#define MXC_CPU_MX23		0x23
+#define MXC_CPU_MX25		0x25
+#define MXC_CPU_MX27		0x27
+#define MXC_CPU_MX28		0x28
+#define MXC_CPU_MX31		0x31
+#define MXC_CPU_MX35		0x35
+#define MXC_CPU_MX51		0x51
+#define MXC_CPU_MX53		0x53
+#define MXC_CPU_MX6SL		0x60
+#define MXC_CPU_MX6DL		0x61
+#define MXC_CPU_MX6SX		0x62
+#define MXC_CPU_MX6Q		0x63
+#define MXC_CPU_MX6UL		0x64
+#define MXC_CPU_MX6ULL		0x65
+#define MXC_CPU_MX6ULZ		0x6B
+#define MXC_CPU_MX6SOLO		0x66 /* dummy */
+#define MXC_CPU_MX6SLL		0x67
+#define MXC_CPU_MX6D		0x6A
+#define MXC_CPU_MX6DP		0x68
+#define MXC_CPU_MX6QP		0x69
+#define MXC_CPU_MX7S		0x71 /* dummy ID */
+#define MXC_CPU_MX7D		0x72
+#define MXC_CPU_IMX8MQ		0x82
+#define MXC_CPU_IMX8MD		0x83 /* dummy ID */
+#define MXC_CPU_IMX8MQL     0x84 /* dummy ID */
+#define MXC_CPU_IMX8MM		0x85 /* dummy ID */
+#define MXC_CPU_IMX8MML		0x86 /* dummy ID */
+#define MXC_CPU_IMX8MMD		0x87 /* dummy ID */
+#define MXC_CPU_IMX8MMDL	0x88 /* dummy ID */
+#define MXC_CPU_IMX8MMS		0x89 /* dummy ID */
+#define MXC_CPU_IMX8MMSL	0x8a /* dummy ID */
+#define MXC_CPU_IMX8MN		0x8b /* dummy ID */
+#define MXC_CPU_IMX8MND		0x8c /* dummy ID */
+#define MXC_CPU_IMX8MNS		0x8d /* dummy ID */
+#define MXC_CPU_IMX8MNL		0x8e /* dummy ID */
+#define MXC_CPU_IMX8MNDL		0x8f /* dummy ID */
+#define MXC_CPU_IMX8MNSL		0x181 /* dummy ID */
+#define MXC_CPU_IMX8MNUQ		0x182 /* dummy ID */
+#define MXC_CPU_IMX8MNUD		0x183 /* dummy ID */
+#define MXC_CPU_IMX8MNUS		0x184 /* dummy ID */
+#define MXC_CPU_IMX8MP		0x185/* dummy ID */
+#define MXC_CPU_IMX8MP6		0x186 /* dummy ID */
+#define MXC_CPU_IMX8MPL		0x187 /* dummy ID */
+#define MXC_CPU_IMX8MPD		0x188 /* dummy ID */
+#define MXC_CPU_IMX8QXP_A0	0x90 /* dummy ID */
+#define MXC_CPU_IMX8QM		0x91 /* dummy ID */
+#define MXC_CPU_IMX8QXP		0x92 /* dummy ID */
+#define MXC_CPU_IMXRT1020	0xB4 /* dummy ID */
+#define MXC_CPU_IMXRT1050	0xB6 /* dummy ID */
+#define MXC_CPU_MX7ULP		0xE1 /* Temporally hard code */
+#define MXC_CPU_VF610		0xF6 /* dummy ID */
+
+#define MXC_SOC_MX6		0x60
+#define MXC_SOC_MX7		0x70
+#define MXC_SOC_IMX8M		0x80
+#define MXC_SOC_IMX8		0x90 /* dummy */
+#define MXC_SOC_IMXRT		0xB0 /* dummy */
+#define MXC_SOC_MX7ULP		0xE0 /* dummy */
+
+#define CHIP_REV_1_0            0x10
+#define CHIP_REV_1_1            0x11
+#define CHIP_REV_1_2            0x12
+#define CHIP_REV_1_3            0x13
+#define CHIP_REV_1_5            0x15
+#define CHIP_REV_2_0            0x20
+#define CHIP_REV_2_1            0x21
+#define CHIP_REV_2_2            0x22
+#define CHIP_REV_2_5            0x25
+#define CHIP_REV_3_0            0x30
+
+#define CHIP_REV_A		0x0
+#define CHIP_REV_B		0x1
+#define CHIP_REV_C		0x2
+
+#define BOARD_REV_1_0           0x0
+#define BOARD_REV_2_0           0x1
+#define BOARD_VER_OFFSET        0x8
+
+#define CS0_128					0
+#define CS0_64M_CS1_64M				1
+#define CS0_64M_CS1_32M_CS2_32M			2
+#define CS0_32M_CS1_32M_CS2_32M_CS3_32M		3
+
+u32 get_imx_reset_cause(void);
+ulong get_systemPLLCLK(void);
+ulong get_FCLK(void);
+ulong get_HCLK(void);
+ulong get_BCLK(void);
+ulong get_PERCLK1(void);
+ulong get_PERCLK2(void);
+ulong get_PERCLK3(void);
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/boot0.h
new file mode 100644
index 000000000..5ce781adb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/boot0.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#if defined(CONFIG_SPL_BUILD)
+	/*
+	 * We use absolute address not PC relative address to jump.
+	 * When running SPL on iMX8, the A core starts at address 0, a alias to OCRAM 0x100000,
+	 * our linker address for SPL is from 0x100000. So using absolute address can jump to
+	 * the OCRAM address from the alias.
+	 * The alias only map first 96KB of OCRAM, so this require the SPL size can't beyond 96KB.
+	 * But when using SPL DM, the size increase significantly and may exceed 96KB.
+	 * That's why we have to jump to OCRAM.
+	 */
+
+	ldr	x0, =reset
+	br	x0
+#else
+	b	reset
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/clock.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/clock.h
new file mode 100644
index 000000000..bea157171
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/clock.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8_CLOCK_H__
+#define __ASM_ARCH_IMX8_CLOCK_H__
+
+/* Mainly for compatible to imx common code. */
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_UART_CLK,
+	MXC_CSPI_CLK,
+	MXC_AXI_CLK,
+	MXC_DDR_CLK,
+	MXC_ESDHC_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_ESDHC3_CLK,
+	MXC_I2C_CLK,
+	MXC_FEC_CLK,
+};
+
+u32 mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_IMX8_CLOCK_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/gpio.h
new file mode 100644
index 000000000..24cfde3c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/gpio.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8_GPIO_H
+#define __ASM_ARCH_IMX8_GPIO_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+/* GPIO registers */
+struct gpio_regs {
+	u32 gpio_dr;	/* data */
+	u32 gpio_dir;	/* direction */
+	u32 gpio_psr;	/* pad satus */
+};
+#endif
+
+/* IMX8 the GPIO index is from 0 not 1 */
+#define IMX_GPIO_NR(port, index)		(((port) * 32) + ((index) & 31))
+
+#endif /* __ASM_ARCH_IMX8_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/image.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/image.h
new file mode 100644
index 000000000..547beeb98
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/image.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef __CONTAINER_HEADER_H_
+#define __CONTAINER_HEADER_H_
+
+#include <linux/sizes.h>
+#include <linux/types.h>
+
+#define IV_MAX_LEN			32
+#define HASH_MAX_LEN			64
+
+#define CONTAINER_HDR_ALIGNMENT 0x400
+#define CONTAINER_HDR_EMMC_OFFSET 0
+#define CONTAINER_HDR_MMCSD_OFFSET SZ_32K
+#define CONTAINER_HDR_QSPI_OFFSET SZ_4K
+#define CONTAINER_HDR_NAND_OFFSET SZ_128M
+
+struct container_hdr {
+	u8 version;
+	u8 length_lsb;
+	u8 length_msb;
+	u8 tag;
+	u32 flags;
+	u16 sw_version;
+	u8 fuse_version;
+	u8 num_images;
+	u16 sig_blk_offset;
+	u16 reserved;
+} __packed;
+
+struct boot_img_t {
+	u32 offset;
+	u32 size;
+	u64 dst;
+	u64 entry;
+	u32 hab_flags;
+	u32 meta;
+	u8 hash[HASH_MAX_LEN];
+	u8 iv[IV_MAX_LEN];
+} __packed;
+
+struct signature_block_hdr {
+	u8 version;
+	u8 length_lsb;
+	u8 length_msb;
+	u8 tag;
+	u16 srk_table_offset;
+	u16 cert_offset;
+	u16 blob_offset;
+	u16 signature_offset;
+	u32 reserved;
+} __packed;
+
+struct generate_key_blob_hdr {
+	u8 version;
+	u8 length_lsb;
+	u8 length_msb;
+	u8 tag;
+	u8 flags;
+	u8 size;
+	u8 algorithm;
+	u8 mode;
+} __packed;
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/imx-regs.h
new file mode 100644
index 000000000..ed6e05e55
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/imx-regs.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8_REGS_H__
+#define __ASM_ARCH_IMX8_REGS_H__
+
+#define ARCH_MXC
+
+#define LPUART_BASE		0x5A060000
+
+#define GPT1_BASE_ADDR		0x5D140000
+#define SCU_LPUART_BASE		0x33220000
+#define GPIO1_BASE_ADDR		0x5D080000
+#define GPIO2_BASE_ADDR		0x5D090000
+#define GPIO3_BASE_ADDR		0x5D0A0000
+#define GPIO4_BASE_ADDR		0x5D0B0000
+#define GPIO5_BASE_ADDR		0x5D0C0000
+#define GPIO6_BASE_ADDR		0x5D0D0000
+#define GPIO7_BASE_ADDR		0x5D0E0000
+#define GPIO8_BASE_ADDR		0x5D0F0000
+#define LPI2C1_BASE_ADDR	0x5A800000
+#define LPI2C2_BASE_ADDR	0x5A810000
+#define LPI2C3_BASE_ADDR	0x5A820000
+#define LPI2C4_BASE_ADDR	0x5A830000
+#define LPI2C5_BASE_ADDR	0x5A840000
+
+#define FEC_QUIRK_ENET_MAC
+
+#ifdef CONFIG_IMX8QXP
+#define LVDS0_PHYCTRL_BASE	0x56221000
+#define LVDS1_PHYCTRL_BASE	0x56241000
+#define MIPI0_SS_BASE		0x56220000
+#define MIPI1_SS_BASE		0x56240000
+#endif
+
+#define APBH_DMA_ARB_BASE_ADDR	0x5B810000
+#define APBH_DMA_ARB_END_ADDR	0x5B81FFFF
+#define MXS_APBH_BASE		APBH_DMA_ARB_BASE_ADDR
+
+#define MXS_GPMI_BASE		(APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE		(APBH_DMA_ARB_BASE_ADDR + 0x04000)
+
+#define PASS_OVER_INFO_ADDR	0x0010fe00
+
+#define USB_BASE_ADDR		0x5b0d0000
+#define USB_PHY0_BASE_ADDR	0x5b100000
+
+#endif /* __ASM_ARCH_IMX8_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/imx8-pins.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/imx8-pins.h
new file mode 100644
index 000000000..213029816
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/imx8-pins.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8_PINS_H__
+#define __ASM_ARCH_IMX8_PINS_H__
+
+#if defined(CONFIG_IMX8QXP)
+#include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#elif defined(CONFIG_IMX8QM)
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
+#else
+#error "No pin header"
+#endif
+
+#endif	/* __ASM_ARCH_IMX8_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/iomux.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/iomux.h
new file mode 100644
index 000000000..3acef1ea6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/iomux.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8_IOMUX_H__
+#define __ASM_ARCH_IMX8_IOMUX_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/*
+ * We use 64bits value for iomux settings.
+ * High 32bits are used for padring register value,
+ * low 16bits are used for pin index.
+ */
+typedef u64 iomux_cfg_t;
+
+#define PADRING_IFMUX_EN_SHIFT		31
+#define PADRING_IFMUX_EN_MASK		BIT(31)
+#define PADRING_GP_EN_SHIFT		30
+#define PADRING_GP_EN_MASK		BIT(30)
+#define PADRING_IFMUX_SHIFT		27
+#define PADRING_IFMUX_MASK		GENMASK(29, 27)
+#define PADRING_CONFIG_SHIFT		25
+#define PADRING_LPCONFIG_SHIFT		23
+#define PADRING_PULL_SHIFT		5
+#define PADRING_DSE_SHIFT		0
+
+#define MUX_PAD_CTRL_SHIFT	32
+#define MUX_PAD_CTRL_MASK	((iomux_cfg_t)0xFFFFFFFF << MUX_PAD_CTRL_SHIFT)
+#define MUX_PAD_CTRL(x)		((iomux_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+#define MUX_MODE_SHIFT		(PADRING_IFMUX_SHIFT + MUX_PAD_CTRL_SHIFT)
+#define MUX_MODE_MASK		((iomux_cfg_t)0x7 << MUX_MODE_SHIFT)
+#define PIN_ID_MASK		((iomux_cfg_t)0xFFFF)
+
+/* Valid mux alt0 to alt7 */
+#define MUX_MODE_ALT(x)		(((iomux_cfg_t)(x) << MUX_MODE_SHIFT) & \
+				 MUX_MODE_MASK)
+
+void imx8_iomux_setup_pad(iomux_cfg_t pad);
+void imx8_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list, u32 count);
+#endif	/* __ASM_ARCH_IMX8_IOMUX_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/power-domain.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/power-domain.h
new file mode 100644
index 000000000..1db86a120
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/power-domain.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017 NXP
+ */
+
+#ifndef _ASM_ARCH_IMX8_POWER_DOMAIN_H
+#define _ASM_ARCH_IMX8_POWER_DOMAIN_H
+
+#include <asm/arch/sci/types.h>
+
+struct imx8_power_domain_plat {
+	sc_rsrc_t resource_id;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/rpc.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/rpc.h
new file mode 100644
index 000000000..9f55904f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/rpc.h
@@ -0,0 +1,230 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright 2017-2018 NXP
+ *
+ */
+
+#ifndef SC_RPC_H
+#define SC_RPC_H
+
+/* Note: Check SCFW API Released DOC before you want to modify something */
+/* Defines */
+
+#define SCFW_API_VERSION_MAJOR  1U
+#define SCFW_API_VERSION_MINOR  15U
+
+#define SC_RPC_VERSION          1U
+
+#define SC_RPC_MAX_MSG          8U
+
+#define RPC_VER(MSG)            ((MSG)->version)
+#define RPC_SIZE(MSG)           ((MSG)->size)
+#define RPC_SVC(MSG)            ((MSG)->svc)
+#define RPC_FUNC(MSG)           ((MSG)->func)
+#define RPC_R8(MSG)             ((MSG)->func)
+#define RPC_I64(MSG, IDX)       ((s64)(RPC_U32((MSG), (IDX))) << 32ULL) | \
+				  (s64)(RPC_U32((MSG), (IDX) + 4U))
+#define RPC_I32(MSG, IDX)       ((MSG)->DATA.i32[(IDX) / 4U])
+#define RPC_I16(MSG, IDX)       ((MSG)->DATA.i16[(IDX) / 2U])
+#define RPC_I8(MSG, IDX)        ((MSG)->DATA.i8[(IDX)])
+#define RPC_U64(MSG, IDX)       ((u64)(RPC_U32((MSG), (IDX))) << 32ULL) | \
+				  (u64)(RPC_U32((MSG), (IDX) + 4U))
+#define RPC_U32(MSG, IDX)       ((MSG)->DATA.u32[(IDX) / 4U])
+#define RPC_U16(MSG, IDX)       ((MSG)->DATA.u16[(IDX) / 2U])
+#define RPC_U8(MSG, IDX)        ((MSG)->DATA.u8[(IDX)])
+
+#define SC_RPC_SVC_UNKNOWN      0U
+#define SC_RPC_SVC_RETURN       1U
+#define SC_RPC_SVC_PM           2U
+#define SC_RPC_SVC_RM           3U
+#define SC_RPC_SVC_TIMER        5U
+#define SC_RPC_SVC_PAD          6U
+#define SC_RPC_SVC_MISC         7U
+#define SC_RPC_SVC_IRQ          8U
+#define SC_RPC_SVC_SECO         9U
+#define SC_RPC_SVC_ABORT        10U
+
+
+/* Types */
+
+struct sc_rpc_msg_s {
+	u8 version;
+	u8 size;
+	u8 svc;
+	u8 func;
+	union {
+		s32 i32[(SC_RPC_MAX_MSG - 1U)];
+		s16 i16[(SC_RPC_MAX_MSG - 1U) * 2U];
+		s8 i8[(SC_RPC_MAX_MSG - 1U) * 4U];
+		u32 u32[(SC_RPC_MAX_MSG - 1U)];
+		u16 u16[(SC_RPC_MAX_MSG - 1U) * 2U];
+		u8 u8[(SC_RPC_MAX_MSG - 1U) * 4U];
+	} DATA;
+};
+
+/* PM RPC */
+#define PM_FUNC_UNKNOWN				0
+#define PM_FUNC_SET_SYS_POWER_MODE		19U
+#define PM_FUNC_SET_PARTITION_POWER_MODE	1U
+#define PM_FUNC_GET_SYS_POWER_MODE		2U
+#define PM_FUNC_SET_RESOURCE_POWER_MODE		3U
+#define PM_FUNC_GET_RESOURCE_POWER_MODE		4U
+#define PM_FUNC_REQ_LOW_POWER_MODE		16U
+#define PM_FUNC_REQ_CPU_LOW_POWER_MODE		20U
+#define PM_FUNC_SET_CPU_RESUME_ADDR		17U
+#define PM_FUNC_SET_CPU_RESUME			21U
+#define PM_FUNC_REQ_SYS_IF_POWER_MODE		18U
+#define PM_FUNC_SET_CLOCK_RATE			5U
+#define PM_FUNC_GET_CLOCK_RATE			6U
+#define PM_FUNC_CLOCK_ENABLE			7U
+#define PM_FUNC_SET_CLOCK_PARENT		14U
+#define PM_FUNC_GET_CLOCK_PARENT		15U
+#define PM_FUNC_RESET				13U
+#define PM_FUNC_RESET_REASON			10U
+#define PM_FUNC_BOOT				8U
+#define PM_FUNC_REBOOT				9U
+#define PM_FUNC_REBOOT_PARTITION		12U
+#define PM_FUNC_CPU_START			11U
+#define PM_FUNC_CPU_RESET			23U
+#define PM_FUNC_RESOURCE_RESET			29U
+#define PM_FUNC_IS_PARTITION_STARTED 24U
+
+/* MISC RPC */
+#define MISC_FUNC_UNKNOWN			0
+#define MISC_FUNC_SET_CONTROL			1U
+#define MISC_FUNC_GET_CONTROL			2U
+#define MISC_FUNC_SET_MAX_DMA_GROUP		4U
+#define MISC_FUNC_SET_DMA_GROUP			5U
+#define MISC_FUNC_SECO_IMAGE_LOAD		8U
+#define MISC_FUNC_SECO_AUTHENTICATE		9U
+#define MISC_FUNC_SECO_FUSE_WRITE		20U
+#define MISC_FUNC_SECO_ENABLE_DEBUG		21U
+#define MISC_FUNC_SECO_FORWARD_LIFECYCLE	22U
+#define MISC_FUNC_SECO_RETURN_LIFECYCLE		23U
+#define MISC_FUNC_SECO_BUILD_INFO		24U
+#define MISC_FUNC_DEBUG_OUT			10U
+#define MISC_FUNC_WAVEFORM_CAPTURE		6U
+#define MISC_FUNC_BUILD_INFO			15U
+#define MISC_FUNC_UNIQUE_ID			19U
+#define MISC_FUNC_SET_ARI			3U
+#define MISC_FUNC_BOOT_STATUS			7U
+#define MISC_FUNC_BOOT_DONE			14U
+#define MISC_FUNC_OTP_FUSE_READ			11U
+#define MISC_FUNC_OTP_FUSE_WRITE		17U
+#define MISC_FUNC_SET_TEMP			12U
+#define MISC_FUNC_GET_TEMP			13U
+#define MISC_FUNC_GET_BOOT_DEV			16U
+#define MISC_FUNC_GET_BUTTON_STATUS		18U
+#define MISC_FUNC_GET_BOOT_CONTAINER	36U
+
+/* PAD RPC */
+#define PAD_FUNC_UNKNOWN			0
+#define PAD_FUNC_SET_MUX			1U
+#define PAD_FUNC_GET_MUX			6U
+#define PAD_FUNC_SET_GP				2U
+#define PAD_FUNC_GET_GP				7U
+#define PAD_FUNC_SET_WAKEUP			4U
+#define PAD_FUNC_GET_WAKEUP			9U
+#define PAD_FUNC_SET_ALL			5U
+#define PAD_FUNC_GET_ALL			10U
+#define PAD_FUNC_SET				15U
+#define PAD_FUNC_GET				16U
+#define PAD_FUNC_SET_GP_28FDSOI			11U
+#define PAD_FUNC_GET_GP_28FDSOI			12U
+#define PAD_FUNC_SET_GP_28FDSOI_HSIC		3U
+#define PAD_FUNC_GET_GP_28FDSOI_HSIC		8U
+#define PAD_FUNC_SET_GP_28FDSOI_COMP		13U
+#define PAD_FUNC_GET_GP_28FDSOI_COMP		14U
+
+/* RM RPC */
+#define RM_FUNC_UNKNOWN				0
+#define RM_FUNC_PARTITION_ALLOC			1U
+#define RM_FUNC_SET_CONFIDENTIAL		31U
+#define RM_FUNC_PARTITION_FREE			2U
+#define RM_FUNC_GET_DID				26U
+#define RM_FUNC_PARTITION_STATIC		3U
+#define RM_FUNC_PARTITION_LOCK			4U
+#define RM_FUNC_GET_PARTITION			5U
+#define RM_FUNC_SET_PARENT			6U
+#define RM_FUNC_MOVE_ALL			7U
+#define RM_FUNC_ASSIGN_RESOURCE			8U
+#define RM_FUNC_SET_RESOURCE_MOVABLE		9U
+#define RM_FUNC_SET_SUBSYS_RSRC_MOVABLE		28U
+#define RM_FUNC_SET_MASTER_ATTRIBUTES		10U
+#define RM_FUNC_SET_MASTER_SID			11U
+#define RM_FUNC_SET_PERIPHERAL_PERMISSIONS	12U
+#define RM_FUNC_IS_RESOURCE_OWNED		13U
+#define RM_FUNC_GET_RESOURCE_OWNER 33U
+#define RM_FUNC_IS_RESOURCE_MASTER		14U
+#define RM_FUNC_IS_RESOURCE_PERIPHERAL		15U
+#define RM_FUNC_GET_RESOURCE_INFO		16U
+#define RM_FUNC_MEMREG_ALLOC			17U
+#define RM_FUNC_MEMREG_SPLIT			29U
+#define RM_FUNC_MEMREG_FREE			18U
+#define RM_FUNC_FIND_MEMREG			30U
+#define RM_FUNC_ASSIGN_MEMREG			19U
+#define RM_FUNC_SET_MEMREG_PERMISSIONS		20U
+#define RM_FUNC_IS_MEMREG_OWNED			21U
+#define RM_FUNC_GET_MEMREG_INFO			22U
+#define RM_FUNC_ASSIGN_PAD			23U
+#define RM_FUNC_SET_PAD_MOVABLE			24U
+#define RM_FUNC_IS_PAD_OWNED			25U
+#define RM_FUNC_DUMP				27U
+
+/* SECO RPC */
+#define SECO_FUNC_UNKNOWN 0 /* Unknown function */
+#define SECO_FUNC_IMAGE_LOAD 1U /* Index for seco_image_load() RPC call */
+#define SECO_FUNC_AUTHENTICATE 2U /* Index for seco_authenticate() RPC call */
+#define SECO_FUNC_ENH_AUTHENTICATE 24U /* Index for sc_seco_enh_authenticate() RPC call */
+#define SECO_FUNC_FORWARD_LIFECYCLE 3U /* Index for seco_forward_lifecycle() RPC call */
+#define SECO_FUNC_RETURN_LIFECYCLE 4U /* Index for seco_return_lifecycle() RPC call */
+#define SECO_FUNC_COMMIT 5U /* Index for seco_commit() RPC call */
+#define SECO_FUNC_ATTEST_MODE 6U /* Index for seco_attest_mode() RPC call */
+#define SECO_FUNC_ATTEST 7U /* Index for seco_attest() RPC call */
+#define SECO_FUNC_GET_ATTEST_PKEY 8U /* Index for seco_get_attest_pkey() RPC call */
+#define SECO_FUNC_GET_ATTEST_SIGN 9U /* Index for seco_get_attest_sign() RPC call */
+#define SECO_FUNC_ATTEST_VERIFY 10U /* Index for seco_attest_verify() RPC call */
+#define SECO_FUNC_GEN_KEY_BLOB 11U /* Index for seco_gen_key_blob() RPC call */
+#define SECO_FUNC_LOAD_KEY 12U /* Index for seco_load_key() RPC call */
+#define SECO_FUNC_GET_MP_KEY 13U /* Index for seco_get_mp_key() RPC call */
+#define SECO_FUNC_UPDATE_MPMR 14U /* Index for seco_update_mpmr() RPC call */
+#define SECO_FUNC_GET_MP_SIGN 15U /* Index for seco_get_mp_sign() RPC call */
+#define SECO_FUNC_BUILD_INFO 16U /* Index for seco_build_info() RPC call */
+#define SECO_FUNC_CHIP_INFO 17U /* Index for seco_chip_info() RPC call */
+#define SECO_FUNC_ENABLE_DEBUG 18U /* Index for seco_enable_debug() RPC call */
+#define SECO_FUNC_GET_EVENT 19U /* Index for seco_get_event() RPC call */
+#define SECO_FUNC_FUSE_WRITE 20U /* Index for seco_fuse_write() RPC call */
+#define SECO_FUNC_PATCH 21U /* Index for sc_seco_patch() RPC call */
+#define SECO_FUNC_START_RNG 22U /* Index for sc_seco_start_rng() RPC call */
+#define SECO_FUNC_SAB_MSG 23U /* Index for sc_seco_sab_msg() RPC call */
+#define SECO_FUNC_SECVIO_ENABLE 25U /* Index for sc_seco_secvio_enable() RPC call */
+#define SECO_FUNC_SECVIO_CONFIG 26U /* Index for sc_seco_secvio_config() RPC call */
+#define SECO_FUNC_SECVIO_DGO_CONFIG 27U /* Index for sc_seco_secvio_dgo_config() RPC call */
+
+/* IRQ RPC */
+#define IRQ_FUNC_UNKNOWN 0 /* Unknown function */
+#define IRQ_FUNC_ENABLE 1U /* Index for sc_irq_enable() RPC call */
+#define IRQ_FUNC_STATUS 2U /* Index for sc_irq_status() RPC call */
+
+/* TIMER RPC */
+#define TIMER_FUNC_UNKNOWN 0 /* Unknown function */
+#define TIMER_FUNC_SET_WDOG_TIMEOUT 1U /* Index for sc_timer_set_wdog_timeout() RPC call */
+#define TIMER_FUNC_SET_WDOG_PRE_TIMEOUT 12U /* Index for sc_timer_set_wdog_pre_timeout() RPC call */
+#define TIMER_FUNC_START_WDOG 2U /* Index for sc_timer_start_wdog() RPC call */
+#define TIMER_FUNC_STOP_WDOG 3U /* Index for sc_timer_stop_wdog() RPC call */
+#define TIMER_FUNC_PING_WDOG 4U /* Index for sc_timer_ping_wdog() RPC call */
+#define TIMER_FUNC_GET_WDOG_STATUS 5U /* Index for sc_timer_get_wdog_status() RPC call */
+#define TIMER_FUNC_PT_GET_WDOG_STATUS 13U /* Index for sc_timer_pt_get_wdog_status() RPC call */
+#define TIMER_FUNC_SET_WDOG_ACTION 10U /* Index for sc_timer_set_wdog_action() RPC call */
+#define TIMER_FUNC_SET_RTC_TIME 6U /* Index for sc_timer_set_rtc_time() RPC call */
+#define TIMER_FUNC_GET_RTC_TIME 7U /* Index for sc_timer_get_rtc_time() RPC call */
+#define TIMER_FUNC_GET_RTC_SEC1970 9U /* Index for sc_timer_get_rtc_sec1970() RPC call */
+#define TIMER_FUNC_SET_RTC_ALARM 8U /* Index for sc_timer_set_rtc_alarm() RPC call */
+#define TIMER_FUNC_SET_RTC_PERIODIC_ALARM 14U /* Index for sc_timer_set_rtc_periodic_alarm() RPC call */
+#define TIMER_FUNC_CANCEL_RTC_ALARM 15U /* Index for sc_timer_cancel_rtc_alarm() RPC call */
+#define TIMER_FUNC_SET_RTC_CALB 11U /* Index for sc_timer_set_rtc_calb() RPC call */
+#define TIMER_FUNC_SET_SYSCTR_ALARM 16U /* Index for sc_timer_set_sysctr_alarm() RPC call */
+#define TIMER_FUNC_SET_SYSCTR_PERIODIC_ALARM 17U /* Index for sc_timer_set_sysctr_periodic_alarm() RPC call */
+#define TIMER_FUNC_CANCEL_SYSCTR_ALARM 18U /* Index for sc_timer_cancel_sysctr_alarm() RPC call */
+
+#endif /* SC_RPC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/sci.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/sci.h
new file mode 100644
index 000000000..1c29209b3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/sci.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef _SC_SCI_H
+#define _SC_SCI_H
+
+#include <log.h>
+#include <asm/arch/sci/types.h>
+#include <asm/arch/sci/svc/misc/api.h>
+#include <asm/arch/sci/svc/pad/api.h>
+#include <asm/arch/sci/svc/pm/api.h>
+#include <asm/arch/sci/svc/rm/api.h>
+#include <asm/arch/sci/svc/seco/api.h>
+#include <asm/arch/sci/rpc.h>
+#include <dt-bindings/soc/imx_rsrc.h>
+#include <linux/errno.h>
+
+static inline int sc_err_to_linux(sc_err_t err)
+{
+	int ret;
+
+	switch (err) {
+	case SC_ERR_NONE:
+		return 0;
+	case SC_ERR_VERSION:
+	case SC_ERR_CONFIG:
+	case SC_ERR_PARM:
+		ret = -EINVAL;
+		break;
+	case SC_ERR_NOACCESS:
+	case SC_ERR_LOCKED:
+	case SC_ERR_UNAVAILABLE:
+		ret = -EACCES;
+		break;
+	case SC_ERR_NOTFOUND:
+	case SC_ERR_NOPOWER:
+		ret = -ENODEV;
+		break;
+	case SC_ERR_IPC:
+		ret = -EIO;
+		break;
+	case SC_ERR_BUSY:
+		ret = -EBUSY;
+		break;
+	case SC_ERR_FAIL:
+		ret = -EIO;
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+
+	debug("%s %d %d\n", __func__, err, ret);
+
+	return ret;
+}
+
+/* PM API*/
+int sc_pm_set_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+				  sc_pm_power_mode_t mode);
+int sc_pm_get_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+				  sc_pm_power_mode_t *mode);
+int sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
+			 sc_pm_clock_rate_t *rate);
+int sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
+			 sc_pm_clock_rate_t *rate);
+int sc_pm_clock_enable(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
+		       sc_bool_t enable, sc_bool_t autog);
+int sc_pm_set_clock_parent(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
+			   sc_pm_clk_parent_t parent);
+int sc_pm_cpu_start(sc_ipc_t ipc, sc_rsrc_t resource, sc_bool_t enable,
+		    sc_faddr_t address);
+sc_bool_t sc_pm_is_partition_started(sc_ipc_t ipc, sc_rm_pt_t pt);
+int sc_pm_resource_reset(sc_ipc_t ipc, sc_rsrc_t resource);
+
+/* MISC API */
+int sc_misc_set_control(sc_ipc_t ipc, sc_rsrc_t resource,
+			sc_ctrl_t ctrl, u32 val);
+int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl,
+			u32 *val);
+void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev);
+void sc_misc_boot_status(sc_ipc_t ipc, sc_misc_boot_status_t status);
+int sc_misc_get_boot_container(sc_ipc_t ipc, u8 *idx);
+void sc_misc_build_info(sc_ipc_t ipc, u32 *build, u32 *commit);
+int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val);
+int sc_misc_get_temp(sc_ipc_t ipc, sc_rsrc_t resource, sc_misc_temp_t temp,
+		     s16 *celsius, s8 *tenths);
+
+/* RM API */
+sc_bool_t sc_rm_is_memreg_owned(sc_ipc_t ipc, sc_rm_mr_t mr);
+int sc_rm_find_memreg(sc_ipc_t ipc, sc_rm_mr_t *mr, sc_faddr_t addr_start,
+		      sc_faddr_t addr_end);
+int sc_rm_set_memreg_permissions(sc_ipc_t ipc, sc_rm_mr_t mr,
+				 sc_rm_pt_t pt, sc_rm_perm_t perm);
+int sc_rm_get_memreg_info(sc_ipc_t ipc, sc_rm_mr_t mr, sc_faddr_t *addr_start,
+			  sc_faddr_t *addr_end);
+sc_bool_t sc_rm_is_resource_owned(sc_ipc_t ipc, sc_rsrc_t resource);
+int sc_rm_partition_alloc(sc_ipc_t ipc, sc_rm_pt_t *pt, sc_bool_t secure,
+			  sc_bool_t isolated, sc_bool_t restricted,
+			  sc_bool_t grant, sc_bool_t coherent);
+int sc_rm_partition_free(sc_ipc_t ipc, sc_rm_pt_t pt);
+int sc_rm_get_partition(sc_ipc_t ipc, sc_rm_pt_t *pt);
+int sc_rm_set_parent(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rm_pt_t pt_parent);
+int sc_rm_assign_resource(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rsrc_t resource);
+int sc_rm_assign_pad(sc_ipc_t ipc, sc_rm_pt_t pt, sc_pad_t pad);
+sc_bool_t sc_rm_is_pad_owned(sc_ipc_t ipc, sc_pad_t pad);
+int sc_rm_get_resource_owner(sc_ipc_t ipc, sc_rsrc_t resource,
+			     sc_rm_pt_t *pt);
+
+/* PAD API */
+int sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, u32 val);
+int sc_pad_get(sc_ipc_t ipc, sc_pad_t pad, uint32_t *val);
+
+/* SMMU API */
+int sc_rm_set_master_sid(sc_ipc_t ipc, sc_rsrc_t resource, sc_rm_sid_t sid);
+
+/* SECO API */
+int sc_seco_authenticate(sc_ipc_t ipc, sc_seco_auth_cmd_t cmd,
+			 sc_faddr_t addr);
+int sc_seco_forward_lifecycle(sc_ipc_t ipc, u32 change);
+int sc_seco_chip_info(sc_ipc_t ipc, u16 *lc, u16 *monotonic, u32 *uid_l,
+		      u32 *uid_h);
+void sc_seco_build_info(sc_ipc_t ipc, u32 *version, u32 *commit);
+int sc_seco_get_event(sc_ipc_t ipc, u8 idx, u32 *event);
+int sc_seco_gen_key_blob(sc_ipc_t ipc, u32 id, sc_faddr_t load_addr,
+			 sc_faddr_t export_addr, u16 max_size);
+int sc_seco_get_mp_key(sc_ipc_t ipc, sc_faddr_t dst_addr, u16 dst_size);
+int sc_seco_update_mpmr(sc_ipc_t ipc, sc_faddr_t addr, u8 size, u8 lock);
+int sc_seco_get_mp_sign(sc_ipc_t ipc, sc_faddr_t msg_addr,
+			u16 msg_size, sc_faddr_t dst_addr, u16 dst_size);
+int sc_seco_secvio_dgo_config(sc_ipc_t ipc, u8 id, u8 access, u32 *data);
+int sc_seco_secvio_config(sc_ipc_t ipc, u8 id, u8 access,
+			  u32 *data0, u32 *data1, u32 *data2, u32 *data3,
+			  u32 *data4, u8 size);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h
new file mode 100644
index 000000000..3629eb68d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_MISC_API_H
+#define SC_MISC_API_H
+
+/* Defines for sc_misc_boot_status_t */
+#define SC_MISC_BOOT_STATUS_SUCCESS	0U	/* Success */
+#define SC_MISC_BOOT_STATUS_SECURITY	1U	/* Security violation */
+
+/* Defines for sc_misc_seco_auth_cmd_t */
+#define SC_MISC_SECO_AUTH_SECO_FW	0U   /* SECO Firmware */
+#define SC_MISC_SECO_AUTH_HDMI_TX_FW	1U   /* HDMI TX Firmware */
+#define SC_MISC_SECO_AUTH_HDMI_RX_FW	2U   /* HDMI RX Firmware */
+
+/* Defines for sc_misc_temp_t */
+#define SC_MISC_TEMP			0U	/* Temp sensor */
+#define SC_MISC_TEMP_HIGH		1U	/* Temp high alarm */
+#define SC_MISC_TEMP_LOW		2U	/* Temp low alarm */
+
+/* Defines for sc_misc_seco_auth_cmd_t */
+#define SC_MISC_AUTH_CONTAINER	0U	/* Authenticate container */
+#define SC_MISC_VERIFY_IMAGE	1U	/* Verify image */
+#define SC_MISC_REL_CONTAINER	2U	/* Release container */
+
+typedef u8 sc_misc_boot_status_t;
+typedef u8 sc_misc_temp_t;
+
+#endif /* SC_MISC_API_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h
new file mode 100644
index 000000000..df368e8c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_PAD_API_H
+#define SC_PAD_API_H
+
+/* Defines for type widths */
+#define SC_PAD_MUX_W            3U    /* Width of mux parameter */
+
+/* Defines for sc_pad_config_t */
+#define SC_PAD_CONFIG_NORMAL	0U	/* Normal */
+#define SC_PAD_CONFIG_OD	1U	/* Open Drain */
+#define SC_PAD_CONFIG_OD_IN	2U	/* Open Drain and input */
+#define SC_PAD_CONFIG_OUT_IN	3U	/* Output and input */
+
+/* Defines for sc_pad_iso_t */
+#define SC_PAD_ISO_OFF		0U	/* ISO latch is transparent */
+#define SC_PAD_ISO_EARLY	1U	/* Follow EARLY_ISO */
+#define SC_PAD_ISO_LATE		2U	/* Follow LATE_ISO */
+#define SC_PAD_ISO_ON		3U	/* ISO latched data is held */
+
+/* Defines for sc_pad_28fdsoi_dse_t */
+#define SC_PAD_28FDSOI_DSE_18V_1MA	0U /* Drive strength of 1mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_2MA	1U /* Drive strength of 2mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_4MA	2U /* Drive strength of 4mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_6MA	3U /* Drive strength of 6mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_8MA	4U /* Drive strength of 8mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_10MA	5U /* Drive strength of 10mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_12MA	6U /* Drive strength of 12mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_HS	7U /* High-speed for 1.8v */
+#define SC_PAD_28FDSOI_DSE_33V_2MA	0U /* Drive strength of 2mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_4MA	1U /* Drive strength of 4mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_8MA	2U /* Drive strength of 8mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_12MA	3U /* Drive strength of 12mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_DV_HIGH	0U /* High drive strength dual volt */
+#define SC_PAD_28FDSOI_DSE_DV_LOW	1U /* Low drive strength  dual volt */
+
+/* Defines for sc_pad_28fdsoi_ps_t */
+#define SC_PAD_28FDSOI_PS_KEEPER 0U /* Bus-keeper (only valid for 1.8v) */
+#define SC_PAD_28FDSOI_PS_PU	1U /* Pull-up */
+#define SC_PAD_28FDSOI_PS_PD	2U /* Pull-down */
+#define SC_PAD_28FDSOI_PS_NONE	3U /* No pull (disabled) */
+
+/* Defines for sc_pad_28fdsoi_pus_t */
+#define SC_PAD_28FDSOI_PUS_30K_PD	0U /* 30K pull-down */
+#define SC_PAD_28FDSOI_PUS_100K_PU	1U /* 100K pull-up */
+#define SC_PAD_28FDSOI_PUS_3K_PU	2U /* 3K pull-up */
+#define SC_PAD_28FDSOI_PUS_30K_PU	3U /* 30K pull-up */
+
+/* Defines for sc_pad_wakeup_t */
+#define SC_PAD_WAKEUP_OFF	0U /* Off */
+#define SC_PAD_WAKEUP_CLEAR	1U /* Clears pending flag */
+#define SC_PAD_WAKEUP_LOW_LVL	4U /* Low level */
+#define SC_PAD_WAKEUP_FALL_EDGE	5U /* Falling edge */
+#define SC_PAD_WAKEUP_RISE_EDGE	6U /* Rising edge */
+#define SC_PAD_WAKEUP_HIGH_LVL	7U /* High-level */
+
+#endif /* SC_PAD_API_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h
new file mode 100644
index 000000000..9008b85c6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_PM_API_H
+#define SC_PM_API_H
+
+/* Defines for sc_pm_power_mode_t */
+#define SC_PM_PW_MODE_OFF	0U /* Power off */
+#define SC_PM_PW_MODE_STBY	1U /* Power in standby */
+#define SC_PM_PW_MODE_LP	2U /* Power in low-power */
+#define SC_PM_PW_MODE_ON	3U /* Power on */
+
+/* Defines for sc_pm_clk_t */
+#define SC_PM_CLK_SLV_BUS	0U /* Slave bus clock */
+#define SC_PM_CLK_MST_BUS	1U /* Master bus clock */
+#define SC_PM_CLK_PER		2U /* Peripheral clock */
+#define SC_PM_CLK_PHY		3U /* Phy clock */
+#define SC_PM_CLK_MISC		4U /* Misc clock */
+#define SC_PM_CLK_MISC0		0U /* Misc 0 clock */
+#define SC_PM_CLK_MISC1		1U /* Misc 1 clock */
+#define SC_PM_CLK_MISC2		2U /* Misc 2 clock */
+#define SC_PM_CLK_MISC3		3U /* Misc 3 clock */
+#define SC_PM_CLK_MISC4		4U /* Misc 4 clock */
+#define SC_PM_CLK_CPU		2U /* CPU clock */
+#define SC_PM_CLK_PLL		4U /* PLL */
+#define SC_PM_CLK_BYPASS	4U /* Bypass clock */
+
+/* Defines for sc_pm_clk_mode_t */
+#define SC_PM_CLK_MODE_ROM_INIT		0U /* Clock is initialized by ROM. */
+#define SC_PM_CLK_MODE_OFF		1U /* Clock is disabled */
+#define SC_PM_CLK_MODE_ON		2U /* Clock is enabled. */
+#define SC_PM_CLK_MODE_AUTOGATE_SW	3U /* Clock is in SW autogate mode */
+#define SC_PM_CLK_MODE_AUTOGATE_HW	4U /* Clock is in HW autogate mode */
+#define SC_PM_CLK_MODE_AUTOGATE_SW_HW	5U /* Clock is in SW-HW autogate mode */
+
+typedef u8 sc_pm_power_mode_t;
+typedef u8 sc_pm_clk_t;
+typedef u8 sc_pm_clk_mode_t;
+typedef u8 sc_pm_clk_parent_t;
+typedef u32 sc_pm_clock_rate_t;
+
+#endif /* SC_PM_API_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h
new file mode 100644
index 000000000..ed303881e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_RM_API_H
+#define SC_RM_API_H
+
+#include <asm/arch/sci/types.h>
+
+/* Defines for type widths */
+#define SC_RM_PARTITION_W   5U      /* Width of sc_rm_pt_t */
+#define SC_RM_MEMREG_W      6U      /* Width of sc_rm_mr_t */
+#define SC_RM_DID_W         4U      /* Width of sc_rm_did_t */
+#define SC_RM_SID_W         6U      /* Width of sc_rm_sid_t */
+#define SC_RM_SPA_W         2U      /* Width of sc_rm_spa_t */
+#define SC_RM_PERM_W        3U      /* Width of sc_rm_perm_t */
+
+/* Defines for ALL parameters */
+#define SC_RM_PT_ALL        ((sc_rm_pt_t)UINT8_MAX)   /* All partitions */
+#define SC_RM_MR_ALL        ((sc_rm_mr_t)UINT8_MAX)   /* All memory regions */
+
+/* Defines for sc_rm_spa_t */
+#define SC_RM_SPA_PASSTHRU  0U   /* Pass through (attribute driven by master) */
+#define SC_RM_SPA_PASSSID   1U   /* Pass through and output on SID */
+#define SC_RM_SPA_ASSERT    2U   /* Assert (force to be secure/privileged) */
+#define SC_RM_SPA_NEGATE    3U   /* Negate (force to be non-secure/user) */
+
+/* Defines for sc_rm_perm_t */
+#define SC_RM_PERM_NONE         0U /* No access */
+#define SC_RM_PERM_SEC_R        1U /* Secure RO */
+#define SC_RM_PERM_SECPRIV_RW   2U /* Secure privilege R/W */
+#define SC_RM_PERM_SEC_RW       3U /* Secure R/W */
+#define SC_RM_PERM_NSPRIV_R     4U /* Secure R/W, non-secure privilege RO */
+#define SC_RM_PERM_NS_R         5U /* Secure R/W, non-secure RO */
+#define SC_RM_PERM_NSPRIV_RW    6U /* Secure R/W, non-secure privilege R/W */
+#define SC_RM_PERM_FULL         7U /* Full access */
+
+/* Types */
+
+/*!
+ * This type is used to declare a resource partition.
+ */
+typedef u8 sc_rm_pt_t;
+
+/*!
+ * This type is used to declare a memory region.
+ */
+typedef u8 sc_rm_mr_t;
+
+/*!
+ * This type is used to declare a resource domain ID used by the
+ * isolation HW.
+ */
+typedef u8 sc_rm_did_t;
+
+/*!
+ * This type is used to declare an SMMU StreamID.
+ */
+typedef u16 sc_rm_sid_t;
+
+/*!
+ * This type is a used to declare master transaction attributes.
+ */
+typedef u8 sc_rm_spa_t;
+
+typedef u8 sc_rm_perm_t;
+
+#endif /* SC_RM_API_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h
new file mode 100644
index 000000000..3ed05842d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef SC_SECO_API_H
+#define SC_SECO_API_H
+
+/* Includes */
+
+#include <asm/arch/sci/types.h>
+
+/* Defines */
+#define SC_SECO_AUTH_CONTAINER          0U   /* Authenticate container */
+#define SC_SECO_VERIFY_IMAGE            1U   /* Verify image */
+#define SC_SECO_REL_CONTAINER           2U   /* Release container */
+#define SC_SECO_AUTH_SECO_FW            3U   /* SECO Firmware */
+#define SC_SECO_AUTH_HDMI_TX_FW         4U   /* HDMI TX Firmware */
+#define SC_SECO_AUTH_HDMI_RX_FW         5U   /* HDMI RX Firmware */
+
+#define SC_SECO_RNG_STAT_UNAVAILABLE    0U  /* Unable to initialize the RNG */
+#define SC_SECO_RNG_STAT_INPROGRESS     1U  /* Initialization is on-going */
+#define SC_SECO_RNG_STAT_READY          2U  /* Initialized */
+
+/* Types */
+
+/*!
+ * This type is used to issue SECO authenticate commands.
+ */
+typedef u8 sc_seco_auth_cmd_t;
+
+/*!
+ * This type is used to return the RNG initialization status.
+ */
+typedef u32 sc_seco_rng_stat_t;
+
+#endif /* SC_SECO_API_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/types.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/types.h
new file mode 100644
index 000000000..adfed13e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sci/types.h
@@ -0,0 +1,226 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_TYPES_H
+#define SC_TYPES_H
+
+/* Includes */
+#include <linux/types.h>
+
+/* Defines */
+/*
+ * This type is used to declare a handle for an IPC communication
+ * channel. Its meaning is specific to the IPC implementation.
+ */
+typedef u64 sc_ipc_t;
+
+/* Defines for common frequencies */
+#define SC_32KHZ            32768U   /* 32KHz */
+#define SC_10MHZ         10000000U   /* 10MHz */
+#define SC_20MHZ         20000000U   /* 20MHz */
+#define SC_25MHZ         25000000U   /* 25MHz */
+#define SC_27MHZ         27000000U   /* 27MHz */
+#define SC_40MHZ         40000000U   /* 40MHz */
+#define SC_45MHZ         45000000U   /* 45MHz */
+#define SC_50MHZ         50000000U   /* 50MHz */
+#define SC_60MHZ         60000000U   /* 60MHz */
+#define SC_66MHZ         66666666U   /* 66MHz */
+#define SC_74MHZ         74250000U   /* 74.25MHz */
+#define SC_80MHZ         80000000U   /* 80MHz */
+#define SC_83MHZ         83333333U   /* 83MHz */
+#define SC_84MHZ         84375000U   /* 84.37MHz */
+#define SC_100MHZ       100000000U   /* 100MHz */
+#define SC_114MHZ       114000000U   /* 114MHz */
+#define SC_125MHZ       125000000U   /* 125MHz */
+#define SC_133MHZ       133333333U   /* 133MHz */
+#define SC_135MHZ       135000000U   /* 135MHz */
+#define SC_150MHZ       150000000U   /* 150MHz */
+#define SC_160MHZ       160000000U   /* 160MHz */
+#define SC_166MHZ       166666666U   /* 166MHz */
+#define SC_175MHZ       175000000U   /* 175MHz */
+#define SC_180MHZ       180000000U   /* 180MHz */
+#define SC_200MHZ       200000000U   /* 200MHz */
+#define SC_250MHZ       250000000U   /* 250MHz */
+#define SC_266MHZ       266666666U   /* 266MHz */
+#define SC_300MHZ       300000000U   /* 300MHz */
+#define SC_312MHZ       312500000U   /* 312.5MHZ */
+#define SC_320MHZ       320000000U   /* 320MHz */
+#define SC_325MHZ       325000000U   /* 325MHz */
+#define SC_333MHZ       333333333U   /* 333MHz */
+#define SC_350MHZ       350000000U   /* 350MHz */
+#define SC_372MHZ       372000000U   /* 372MHz */
+#define SC_375MHZ       375000000U   /* 375MHz */
+#define SC_400MHZ       400000000U   /* 400MHz */
+#define SC_465MHZ       465000000U   /* 465MHz */
+#define SC_500MHZ       500000000U   /* 500MHz */
+#define SC_594MHZ       594000000U   /* 594MHz */
+#define SC_625MHZ       625000000U   /* 625MHz */
+#define SC_640MHZ       640000000U   /* 640MHz */
+#define SC_650MHZ       650000000U   /* 650MHz */
+#define SC_667MHZ       666666667U   /* 667MHz */
+#define SC_675MHZ       675000000U   /* 675MHz */
+#define SC_700MHZ       700000000U   /* 700MHz */
+#define SC_720MHZ       720000000U   /* 720MHz */
+#define SC_750MHZ       750000000U   /* 750MHz */
+#define SC_800MHZ       800000000U   /* 800MHz */
+#define SC_850MHZ       850000000U   /* 850MHz */
+#define SC_900MHZ       900000000U   /* 900MHz */
+#define SC_1000MHZ     1000000000U   /* 1GHz */
+#define SC_1060MHZ     1060000000U   /* 1.06GHz */
+#define SC_1188MHZ     1188000000U   /* 1.188GHz */
+#define SC_1260MHZ     1260000000U   /* 1.26GHz */
+#define SC_1280MHZ     1280000000U   /* 1.28GHz */
+#define SC_1300MHZ     1300000000U   /* 1.3GHz */
+#define SC_1400MHZ     1400000000U   /* 1.4GHz */
+#define SC_1500MHZ     1500000000U   /* 1.5GHz */
+#define SC_1600MHZ     1600000000U   /* 1.6GHz */
+#define SC_1800MHZ     1800000000U   /* 1.8GHz */
+#define SC_1860MHZ     1860000000U   /* 1.86GHz */
+#define SC_2000MHZ     2000000000U   /* 2.0GHz */
+#define SC_2112MHZ     2112000000U   /* 2.12GHz */
+
+/* Defines for 24M related frequencies */
+#define SC_8MHZ           8000000U   /* 8MHz */
+#define SC_12MHZ         12000000U   /* 12MHz */
+#define SC_19MHZ         19800000U   /* 19.8MHz */
+#define SC_24MHZ         24000000U   /* 24MHz */
+#define SC_48MHZ         48000000U   /* 48MHz */
+#define SC_120MHZ       120000000U   /* 120MHz */
+#define SC_132MHZ       132000000U   /* 132MHz */
+#define SC_144MHZ       144000000U   /* 144MHz */
+#define SC_192MHZ       192000000U   /* 192MHz */
+#define SC_211MHZ       211200000U   /* 211.2MHz */
+#define SC_228MHZ       228000000U   /* 233MHz */
+#define SC_240MHZ       240000000U   /* 240MHz */
+#define SC_264MHZ       264000000U   /* 264MHz */
+#define SC_352MHZ       352000000U   /* 352MHz */
+#define SC_360MHZ       360000000U   /* 360MHz */
+#define SC_384MHZ       384000000U   /* 384MHz */
+#define SC_396MHZ       396000000U   /* 396MHz */
+#define SC_432MHZ       432000000U   /* 432MHz */
+#define SC_456MHZ       456000000U   /* 466MHz */
+#define SC_480MHZ       480000000U   /* 480MHz */
+#define SC_600MHZ       600000000U   /* 600MHz */
+#define SC_744MHZ       744000000U   /* 744MHz */
+#define SC_792MHZ       792000000U   /* 792MHz */
+#define SC_864MHZ       864000000U   /* 864MHz */
+#define SC_912MHZ       912000000U   /* 912MHz */
+#define SC_960MHZ       960000000U   /* 960MHz */
+#define SC_1056MHZ     1056000000U   /* 1056MHz */
+#define SC_1104MHZ     1104000000U   /* 1104MHz */
+#define SC_1200MHZ     1200000000U   /* 1.2GHz */
+#define SC_1464MHZ     1464000000U   /* 1.464GHz */
+#define SC_2400MHZ     2400000000U   /* 2.4GHz */
+
+/* Defines for A/V related frequencies */
+#define SC_62MHZ         62937500U   /* 62.9375MHz */
+#define SC_755MHZ       755250000U   /* 755.25MHz */
+
+/* Defines for type widths */
+#define SC_FADDR_W      36U          /* Width of sc_faddr_t */
+#define SC_BOOL_W       1U           /* Width of sc_bool_t */
+#define SC_ERR_W        4U           /* Width of sc_err_t */
+#define SC_RSRC_W       10U          /* Width of sc_rsrc_t */
+#define SC_CTRL_W       6U           /* Width of sc_ctrl_t */
+
+/* Defines for sc_bool_t */
+#define SC_FALSE        ((sc_bool_t)0U)
+#define SC_TRUE         ((sc_bool_t)1U)
+
+/* Defines for sc_err_t */
+#define SC_ERR_NONE         0U      /* Success */
+#define SC_ERR_VERSION      1U      /* Incompatible API version */
+#define SC_ERR_CONFIG       2U      /* Configuration error */
+#define SC_ERR_PARM         3U      /* Bad parameter */
+#define SC_ERR_NOACCESS     4U      /* Permission error (no access) */
+#define SC_ERR_LOCKED       5U      /* Permission error (locked) */
+#define SC_ERR_UNAVAILABLE  6U      /* Unavailable (out of resources) */
+#define SC_ERR_NOTFOUND     7U      /* Not found */
+#define SC_ERR_NOPOWER      8U      /* No power */
+#define SC_ERR_IPC          9U      /* Generic IPC error */
+#define SC_ERR_BUSY         10U     /* Resource is currently busy/active */
+#define SC_ERR_FAIL         11U     /* General I/O failure */
+#define SC_ERR_LAST         12U
+
+/* Defines for sc_ctrl_t. */
+#define SC_C_TEMP                       0U
+#define SC_C_TEMP_HI                    1U
+#define SC_C_TEMP_LOW                   2U
+#define SC_C_PXL_LINK_MST1_ADDR         3U
+#define SC_C_PXL_LINK_MST2_ADDR         4U
+#define SC_C_PXL_LINK_MST_ENB           5U
+#define SC_C_PXL_LINK_MST1_ENB          6U
+#define SC_C_PXL_LINK_MST2_ENB          7U
+#define SC_C_PXL_LINK_SLV1_ADDR         8U
+#define SC_C_PXL_LINK_SLV2_ADDR         9U
+#define SC_C_PXL_LINK_MST_VLD           10U
+#define SC_C_PXL_LINK_MST1_VLD          11U
+#define SC_C_PXL_LINK_MST2_VLD          12U
+#define SC_C_SINGLE_MODE                13U
+#define SC_C_ID                         14U
+#define SC_C_PXL_CLK_POLARITY           15U
+#define SC_C_LINESTATE                  16U
+#define SC_C_PCIE_G_RST                 17U
+#define SC_C_PCIE_BUTTON_RST            18U
+#define SC_C_PCIE_PERST                 19U
+#define SC_C_PHY_RESET                  20U
+#define SC_C_PXL_LINK_RATE_CORRECTION   21U
+#define SC_C_PANIC                      22U
+#define SC_C_PRIORITY_GROUP             23U
+#define SC_C_TXCLK                      24U
+#define SC_C_CLKDIV                     25U
+#define SC_C_DISABLE_50                 26U
+#define SC_C_DISABLE_125                27U
+#define SC_C_SEL_125                    28U
+#define SC_C_MODE                       29U
+#define SC_C_SYNC_CTRL0                 30U
+#define SC_C_KACHUNK_CNT                31U
+#define SC_C_KACHUNK_SEL                32U
+#define SC_C_SYNC_CTRL1                 33U
+#define SC_C_DPI_RESET                  34U
+#define SC_C_MIPI_RESET                 35U
+#define SC_C_DUAL_MODE                  36U
+#define SC_C_VOLTAGE                    37U
+#define SC_C_PXL_LINK_SEL               38U
+#define SC_C_OFS_SEL                    39U
+#define SC_C_OFS_AUDIO                  40U
+#define SC_C_OFS_PERIPH                 41U
+#define SC_C_OFS_IRQ                    42U
+#define SC_C_RST0                       43U
+#define SC_C_RST1                       44U
+#define SC_C_SEL0                       45U
+#define SC_C_LAST                       46U
+
+#define SC_P_ALL        ((sc_pad_t)UINT16_MAX)   /* All pads */
+
+/* Types */
+
+/* This type is used to store a boolean */
+typedef u8 sc_bool_t;
+
+/* This type is used to store a system (full-size) address.  */
+typedef u64 sc_faddr_t;
+
+/* This type is used to indicate error response for most functions.  */
+typedef u8 sc_err_t;
+
+/*
+ * This type is used to indicate a resource. Resources include peripherals
+ * and bus masters (but not memory regions). Note items from list should
+ * never be changed or removed (only added to at the end of the list).
+ */
+typedef u16 sc_rsrc_t;
+
+/* This type is used to indicate a control.  */
+typedef u8 sc_ctrl_t;
+
+/*
+ * This type is used to indicate a pad. Valid values are SoC specific.
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+typedef u16 sc_pad_t;
+
+#endif /* SC_TYPES_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/snvs_security_sc.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/snvs_security_sc.h
new file mode 100644
index 000000000..0b7ded7ba
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/snvs_security_sc.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef _SNVS_SECURITY_SC_H
+#define _SNVS_SECURITY_SC_H
+
+int snvs_security_sc_init(void);
+
+#endif /* _SNVS_SECURITY_SC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-imx8/sys_proto.h
new file mode 100644
index 000000000..6f1fc8f99
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8/sys_proto.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <asm/arch/sci/sci.h>
+#include <asm/mach-imx/sys_proto.h>
+#include <asm/arch/power-domain.h>
+#include <dm/platdata.h>
+#include <dm/device-internal.h>
+#include <dm/device.h>
+#include <power-domain.h>
+#include <linux/types.h>
+
+struct pass_over_info_t {
+	u16 barker;
+	u16 len;
+	u32 g_bt_cfg_shadow;
+	u32 card_address_mode;
+	u32 bad_block_count_met;
+	u32 g_ap_mu;
+};
+
+extern unsigned long boot_pointer[];
+void build_info(void);
+enum boot_device get_boot_device(void);
+int print_bootinfo(void);
+int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate);
+int imx8_power_domain_lookup_name(const char *name,
+				  struct power_domain *power_domain);
+void imx8_power_off_pd_devices(const char *permanent_on_devices[], int size);
+bool m4_parts_booted(void);
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock.h
new file mode 100644
index 000000000..77d9428a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock.h
@@ -0,0 +1,278 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ *
+ * Peng Fan <peng.fan at nxp.com>
+ */
+
+#include <linux/bitops.h>
+
+#ifdef CONFIG_IMX8MQ
+#include <asm/arch/clock_imx8mq.h>
+#elif defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN) || \
+	defined(CONFIG_IMX8MP)
+#include <asm/arch/clock_imx8mm.h>
+#else
+#error "Error no clock.h"
+#endif
+
+#define MHZ(X)	((X) * 1000000UL)
+
+/* Mainly for compatible to imx common code. */
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_IPG_CLK,
+	MXC_CSPI_CLK,
+	MXC_ESDHC_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_ESDHC3_CLK,
+	MXC_I2C_CLK,
+	MXC_UART_CLK,
+	MXC_QSPI_CLK,
+};
+
+enum clk_slice_type {
+	CORE_CLOCK_SLICE,
+	BUS_CLOCK_SLICE,
+	IP_CLOCK_SLICE,
+	AHB_CLOCK_SLICE,
+	IPG_CLOCK_SLICE,
+	CORE_SEL_CLOCK_SLICE,
+	DRAM_SEL_CLOCK_SLICE,
+};
+
+enum root_pre_div {
+	CLK_ROOT_PRE_DIV1 = 0,
+	CLK_ROOT_PRE_DIV2,
+	CLK_ROOT_PRE_DIV3,
+	CLK_ROOT_PRE_DIV4,
+	CLK_ROOT_PRE_DIV5,
+	CLK_ROOT_PRE_DIV6,
+	CLK_ROOT_PRE_DIV7,
+	CLK_ROOT_PRE_DIV8,
+};
+
+enum root_post_div {
+	CLK_ROOT_POST_DIV1 = 0,
+	CLK_ROOT_POST_DIV2,
+	CLK_ROOT_POST_DIV3,
+	CLK_ROOT_POST_DIV4,
+	CLK_ROOT_POST_DIV5,
+	CLK_ROOT_POST_DIV6,
+	CLK_ROOT_POST_DIV7,
+	CLK_ROOT_POST_DIV8,
+	CLK_ROOT_POST_DIV9,
+	CLK_ROOT_POST_DIV10,
+	CLK_ROOT_POST_DIV11,
+	CLK_ROOT_POST_DIV12,
+	CLK_ROOT_POST_DIV13,
+	CLK_ROOT_POST_DIV14,
+	CLK_ROOT_POST_DIV15,
+	CLK_ROOT_POST_DIV16,
+	CLK_ROOT_POST_DIV17,
+	CLK_ROOT_POST_DIV18,
+	CLK_ROOT_POST_DIV19,
+	CLK_ROOT_POST_DIV20,
+	CLK_ROOT_POST_DIV21,
+	CLK_ROOT_POST_DIV22,
+	CLK_ROOT_POST_DIV23,
+	CLK_ROOT_POST_DIV24,
+	CLK_ROOT_POST_DIV25,
+	CLK_ROOT_POST_DIV26,
+	CLK_ROOT_POST_DIV27,
+	CLK_ROOT_POST_DIV28,
+	CLK_ROOT_POST_DIV29,
+	CLK_ROOT_POST_DIV30,
+	CLK_ROOT_POST_DIV31,
+	CLK_ROOT_POST_DIV32,
+	CLK_ROOT_POST_DIV33,
+	CLK_ROOT_POST_DIV34,
+	CLK_ROOT_POST_DIV35,
+	CLK_ROOT_POST_DIV36,
+	CLK_ROOT_POST_DIV37,
+	CLK_ROOT_POST_DIV38,
+	CLK_ROOT_POST_DIV39,
+	CLK_ROOT_POST_DIV40,
+	CLK_ROOT_POST_DIV41,
+	CLK_ROOT_POST_DIV42,
+	CLK_ROOT_POST_DIV43,
+	CLK_ROOT_POST_DIV44,
+	CLK_ROOT_POST_DIV45,
+	CLK_ROOT_POST_DIV46,
+	CLK_ROOT_POST_DIV47,
+	CLK_ROOT_POST_DIV48,
+	CLK_ROOT_POST_DIV49,
+	CLK_ROOT_POST_DIV50,
+	CLK_ROOT_POST_DIV51,
+	CLK_ROOT_POST_DIV52,
+	CLK_ROOT_POST_DIV53,
+	CLK_ROOT_POST_DIV54,
+	CLK_ROOT_POST_DIV55,
+	CLK_ROOT_POST_DIV56,
+	CLK_ROOT_POST_DIV57,
+	CLK_ROOT_POST_DIV58,
+	CLK_ROOT_POST_DIV59,
+	CLK_ROOT_POST_DIV60,
+	CLK_ROOT_POST_DIV61,
+	CLK_ROOT_POST_DIV62,
+	CLK_ROOT_POST_DIV63,
+	CLK_ROOT_POST_DIV64,
+};
+
+struct clk_root_map {
+	enum clk_root_index entry;
+	enum clk_slice_type slice_type;
+	u32 slice_index;
+	u8 src_mux[8];
+};
+
+struct ccm_ccgr {
+	u32 ccgr;
+	u32 ccgr_set;
+	u32 ccgr_clr;
+	u32 ccgr_tog;
+};
+
+struct ccm_root {
+	u32 target_root;
+	u32 target_root_set;
+	u32 target_root_clr;
+	u32 target_root_tog;
+	u32 misc;
+	u32 misc_set;
+	u32 misc_clr;
+	u32 misc_tog;
+	u32 nm_post;
+	u32 nm_post_root_set;
+	u32 nm_post_root_clr;
+	u32 nm_post_root_tog;
+	u32 nm_pre;
+	u32 nm_pre_root_set;
+	u32 nm_pre_root_clr;
+	u32 nm_pre_root_tog;
+	u32 db_post;
+	u32 db_post_root_set;
+	u32 db_post_root_clr;
+	u32 db_post_root_tog;
+	u32 db_pre;
+	u32 db_pre_root_set;
+	u32 db_pre_root_clr;
+	u32 db_pre_root_tog;
+	u32 reserved[4];
+	u32 access_ctrl;
+	u32 access_ctrl_root_set;
+	u32 access_ctrl_root_clr;
+	u32 access_ctrl_root_tog;
+};
+
+struct ccm_reg {
+	u32 reserved_0[4096];
+	struct ccm_ccgr ccgr_array[192];
+	u32 reserved_1[3328];
+	struct ccm_root core_root[5];
+	u32 reserved_2[352];
+	struct ccm_root bus_root[12];
+	u32 reserved_3[128];
+	struct ccm_root ahb_ipg_root[4];
+	u32 reserved_4[384];
+	struct ccm_root dram_sel;
+	struct ccm_root core_sel;
+	u32 reserved_5[448];
+	struct ccm_root ip_root[78];
+};
+
+enum enet_freq {
+	ENET_25MHZ = 0,
+	ENET_50MHZ,
+	ENET_125MHZ,
+};
+
+#define DRAM_BYPASS_ROOT_CONFIG(_rate, _m, _p, _s, _k)			\
+	{								\
+		.clk		=	(_rate),			\
+		.alt_root_sel	=	(_m),				\
+		.alt_pre_div	=	(_p),				\
+		.apb_root_sel	=	(_s),				\
+		.apb_pre_div	=	(_k),				\
+	}
+
+struct dram_bypass_clk_setting {
+	ulong clk;
+	int alt_root_sel;
+	enum root_pre_div alt_pre_div;
+	int apb_root_sel;
+	enum root_pre_div apb_pre_div;
+};
+
+#define CCGR_CLK_ON_MASK	0x03
+#define CLK_SRC_ON_MASK		0x03
+
+#define CLK_ROOT_ON		BIT(28)
+#define CLK_ROOT_OFF		(0 << 28)
+#define CLK_ROOT_ENABLE_MASK	BIT(28)
+#define CLK_ROOT_ENABLE_SHIFT	28
+#define CLK_ROOT_SOURCE_SEL(n)	(((n) & 0x7) << 24)
+
+/* For SEL, only use 1 bit */
+#define CLK_ROOT_SRC_MUX_MASK	0x07000000
+#define CLK_ROOT_SRC_MUX_SHIFT	24
+#define CLK_ROOT_SRC_0		0x00000000
+#define CLK_ROOT_SRC_1		0x01000000
+#define CLK_ROOT_SRC_2		0x02000000
+#define CLK_ROOT_SRC_3		0x03000000
+#define CLK_ROOT_SRC_4		0x04000000
+#define CLK_ROOT_SRC_5		0x05000000
+#define CLK_ROOT_SRC_6		0x06000000
+#define CLK_ROOT_SRC_7		0x07000000
+
+#define CLK_ROOT_PRE_DIV_MASK	(0x00070000)
+#define CLK_ROOT_PRE_DIV_SHIFT	16
+#define CLK_ROOT_PRE_DIV(n)	(((n) << 16) & 0x00070000)
+
+#define CLK_ROOT_AUDO_SLOW_EN	0x1000
+
+#define CLK_ROOT_AUDO_DIV_MASK	0x700
+#define CLK_ROOT_AUDO_DIV_SHIFT	0x8
+#define CLK_ROOT_AUDO_DIV(n)	(((n) << 8) & 0x700)
+
+/* For CORE: mask is 0x7; For IPG: mask is 0x3 */
+#define CLK_ROOT_POST_DIV_MASK		0x3f
+#define CLK_ROOT_CORE_POST_DIV_MASK	0x7
+#define CLK_ROOT_IPG_POST_DIV_MASK	0x3
+#define CLK_ROOT_POST_DIV_SHIFT		0
+#define CLK_ROOT_POST_DIV(n)		((n) & 0x3f)
+#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x01000000
+#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK		0x02000000
+#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK		0x03000000
+#define ENET_AXI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x07000000
+#define ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M			0x01000000
+#define ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK	0x01000000
+
+void dram_pll_init(ulong pll_val);
+void dram_enable_bypass(ulong clk_val);
+void dram_disable_bypass(void);
+u32 imx_get_fecclk(void);
+u32 imx_get_uartclk(void);
+int clock_init(void);
+void init_clk_usdhc(u32 index);
+void init_uart_clk(u32 index);
+void init_wdog_clk(void);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+int clock_enable(enum clk_ccgr_index index, bool enable);
+int clock_root_enabled(enum clk_root_index clock_id);
+int clock_root_cfg(enum clk_root_index clock_id, enum root_pre_div pre_div,
+		   enum root_post_div post_div, enum clk_root_src clock_src);
+int clock_set_target_val(enum clk_root_index clock_id, u32 val);
+int clock_get_target_val(enum clk_root_index clock_id, u32 *val);
+int clock_get_prediv(enum clk_root_index clock_id, enum root_pre_div *pre_div);
+int clock_get_postdiv(enum clk_root_index clock_id,
+		      enum root_post_div *post_div);
+int clock_get_src(enum clk_root_index clock_id, enum clk_root_src *p_clock_src);
+void mxs_set_lcdclk(u32 base_addr, u32 freq);
+int set_clk_qspi(void);
+void enable_ocotp_clk(unsigned char enable);
+int enable_i2c_clk(unsigned char enable, unsigned int i2c_num);
+int set_clk_enet(enum enet_freq type);
+int set_clk_eqos(enum enet_freq type);
+void hab_caam_clock_enable(unsigned char enable);
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock_imx8mm.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock_imx8mm.h
new file mode 100644
index 000000000..63b14b9ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock_imx8mm.h
@@ -0,0 +1,580 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#ifndef _ASM_ARCH_IMX8MM_CLOCK_H
+#define _ASM_ARCH_IMX8MM_CLOCK_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define PLL_1443X_RATE(_rate, _m, _p, _s, _k)			\
+	{							\
+		.rate	=	(_rate),			\
+		.mdiv	=	(_m),				\
+		.pdiv	=	(_p),				\
+		.sdiv	=	(_s),				\
+		.kdiv	=	(_k),				\
+	}
+
+#define LOCK_STATUS	BIT(31)
+#define LOCK_SEL_MASK	BIT(29)
+#define CLKE_MASK	BIT(13)
+#define RST_MASK	BIT(9)
+#define BYPASS_MASK	BIT(4)
+#define	MDIV_SHIFT	12
+#define	MDIV_MASK	GENMASK(21, 12)
+#define PDIV_SHIFT	4
+#define PDIV_MASK	GENMASK(9, 4)
+#define SDIV_SHIFT	0
+#define SDIV_MASK	GENMASK(2, 0)
+#define KDIV_SHIFT	0
+#define KDIV_MASK	GENMASK(15, 0)
+
+struct imx_int_pll_rate_table {
+	u32 rate;
+	int mdiv;
+	int pdiv;
+	int sdiv;
+	int kdiv;
+};
+
+enum pll_clocks {
+	ANATOP_ARM_PLL,
+	ANATOP_VPU_PLL,
+	ANATOP_GPU_PLL,
+	ANATOP_SYSTEM_PLL1,
+	ANATOP_SYSTEM_PLL2,
+	ANATOP_SYSTEM_PLL3,
+	ANATOP_AUDIO_PLL1,
+	ANATOP_AUDIO_PLL2,
+	ANATOP_VIDEO_PLL,
+	ANATOP_DRAM_PLL,
+};
+
+#ifdef CONFIG_IMX8MP
+enum clk_root_index {
+	ARM_A53_CLK_ROOT		= 0,
+	ARM_M7_CLK_ROOT			= 1,
+	ML_CLK_ROOT			= 2,
+	GPU3D_CORE_CLK_ROOT		= 3,
+	GPU3D_SHADER_CLK_ROOT		= 4,
+	GPU2D_CLK_ROOT			= 5,
+	AUDIO_AXI_CLK_ROOT		= 6,
+	HSIO_AXI_CLK_ROOT		= 7,
+	MEDIA_ISP_CLK_ROOT		= 8,
+	MAIN_AXI_CLK_ROOT		= 16,
+	ENET_AXI_CLK_ROOT		= 17,
+	NAND_USDHC_BUS_CLK_ROOT		= 18,
+	VPU_BUS_CLK_ROOT		= 19,
+	MEDIA_AXI_CLK_ROOT		= 20,
+	MEDIA_APB_CLK_ROOT		= 21,
+	HDMI_APB_CLK_ROOT		= 22,
+	HDMI_AXI_CLK_ROOT		= 23,
+	GPU_AXI_CLK_ROOT		= 24,
+	GPU_AHB_CLK_ROOT		= 25,
+	NOC_CLK_ROOT			= 26,
+	NOC_IO_CLK_ROOT			= 27,
+	ML_AXI_CLK_ROOT			= 28,
+	ML_AHB_CLK_ROOT			= 29,
+	AHB_CLK_ROOT			= 32,
+	IPG_CLK_ROOT			= 33,
+	AUDIO_AHB_CLK_ROOT		= 34,
+	MIPI_DSI_ESC_RX_CLK_ROOT	= 36,
+	MEDIA_DISP2_CLK_ROOT		= 38,
+	DRAM_SEL_CFG			= 48,
+	CORE_SEL_CFG			= 49,
+	DRAM_ALT_CLK_ROOT		= 64,
+	DRAM_APB_CLK_ROOT		= 65,
+	VPU_G1_CLK_ROOT			= 66,
+	VPU_G2_CLK_ROOT			= 67,
+	CAN1_CLK_ROOT			= 68,
+	CAN2_CLK_ROOT			= 69,
+	PCIE_PHY_CLK_ROOT		= 71,
+	PCIE_AUX_CLK_ROOT		= 72,
+	I2C5_CLK_ROOT			= 73,
+	I2C6_CLK_ROOT			= 74,
+	SAI1_CLK_ROOT			= 75,
+	SAI2_CLK_ROOT			= 76,
+	SAI3_CLK_ROOT			= 77,
+	SAI4_CLK_ROOT			= 78,
+	SAI5_CLK_ROOT			= 79,
+	SAI6_CLK_ROOT			= 80,
+	ENET_QOS_CLK_ROOT		= 81,
+	ENET_QOS_TIMER_CLK_ROOT		= 82,
+	ENET_REF_CLK_ROOT		= 83,
+	ENET_TIMER_CLK_ROOT		= 84,
+	ENET_PHY_REF_CLK_ROOT		= 85,
+	NAND_CLK_ROOT			= 86,
+	QSPI_CLK_ROOT			= 87,
+	USDHC1_CLK_ROOT			= 88,
+	USDHC2_CLK_ROOT			= 89,
+	I2C1_CLK_ROOT			= 90,
+	I2C2_CLK_ROOT			= 91,
+	I2C3_CLK_ROOT			= 92,
+	I2C4_CLK_ROOT			= 93,
+	UART1_CLK_ROOT			= 94,
+	UART2_CLK_ROOT			= 95,
+	UART3_CLK_ROOT			= 96,
+	UART4_CLK_ROOT			= 97,
+	USB_CORE_REF_CLK_ROOT		= 98,
+	USB_PHY_REF_CLK_ROOT		= 99,
+	GIC_CLK_ROOT			= 100,
+	ECSPI1_CLK_ROOT			= 101,
+	ECSPI2_CLK_ROOT			= 102,
+	PWM1_CLK_ROOT			= 103,
+	PWM2_CLK_ROOT			= 104,
+	PWM3_CLK_ROOT			= 105,
+	PWM4_CLK_ROOT			= 106,
+	GPT1_CLK_ROOT			= 107,
+	GPT2_CLK_ROOT			= 108,
+	GPT3_CLK_ROOT			= 109,
+	GPT4_CLK_ROOT			= 110,
+	GPT5_CLK_ROOT			= 111,
+	GPT6_CLK_ROOT			= 112,
+	TRACE_CLK_ROOT			= 113,
+	WDOG_CLK_ROOT			= 114,
+	WRCLK_CLK_ROOT			= 115,
+	IPP_DO_CLKO1			= 116,
+	IPP_DO_CLKO2			= 117,
+	HDMI_FDCC_TST_CLK_ROOT		= 118,
+	HDMI_27M_CLK_ROOT		= 119,
+	HDMI_REF_266M_CLK_ROOT		= 120,
+	USDHC3_CLK_ROOT			= 121,
+	MEDIA_CAM1_PIX_CLK_ROOT		= 122,
+	MEDIA_MIPI_PHY1_REF_CLK_ROOT	= 123,
+	MEDIA_DISP1_PIX_CLK_ROOT	= 124,
+	MEDIA_CAM2_PIX_CLK_ROOT		= 125,
+	MEDIA_LDB_CLK_ROOT	= 126,
+	MEMREPAIR_CLK_ROOT	= 127,
+	MEDIA_MIPI_TEST_BYTE_CLK	= 130,
+	ECSPI3_CLK_ROOT			= 131,
+	PDM_CLK_ROOT			= 132,
+	VPU_VC8000E_CLK_ROOT		= 133,
+	SAI7_CLK_ROOT			= 134,
+	CLK_ROOT_MAX,
+};
+#elif defined(CONFIG_IMX8MN)
+enum clk_root_index {
+	ARM_A53_CLK_ROOT		= 0,
+	ARM_M7_CLK_ROOT			= 1,
+	GPU_CORE_CLK_ROOT		= 3,
+	GPU_SHADER_CLK_ROOT		= 4,
+	MAIN_AXI_CLK_ROOT		= 16,
+	ENET_AXI_CLK_ROOT		= 17,
+	NAND_USDHC_BUS_CLK_ROOT		= 18,
+	DISPLAY_AXI_CLK_ROOT		= 20,
+	DISPLAY_APB_CLK_ROOT		= 21,
+	USB_BUS_CLK_ROOT		= 23,
+	GPU_AXI_CLK_ROOT		= 24,
+	GPU_AHB_CLK_ROOT		= 25,
+	NOC_CLK_ROOT			= 26,
+	AHB_CLK_ROOT			= 32,
+	IPG_CLK_ROOT			= 33,
+	AUDIO_AHB_CLK_ROOT		= 34,
+	DRAM_SEL_CFG			= 48,
+	CORE_SEL_CFG			= 49,
+	DRAM_ALT_CLK_ROOT		= 64,
+	DRAM_APB_CLK_ROOT		= 65,
+	DISPLAY_PIXEL_CLK_ROOT		= 74,
+	SAI2_CLK_ROOT			= 76,
+	SAI3_CLK_ROOT			= 77,
+	SAI5_CLK_ROOT			= 79,
+	SAI6_CLK_ROOT			= 80,
+	SPDIF1_CLK_ROOT			= 81,
+	ENET_REF_CLK_ROOT		= 83,
+	ENET_TIMER_CLK_ROOT		= 84,
+	ENET_PHY_REF_CLK_ROOT		= 85,
+	NAND_CLK_ROOT			= 86,
+	QSPI_CLK_ROOT			= 87,
+	USDHC1_CLK_ROOT			= 88,
+	USDHC2_CLK_ROOT			= 89,
+	I2C1_CLK_ROOT			= 90,
+	I2C2_CLK_ROOT			= 91,
+	I2C3_CLK_ROOT			= 92,
+	I2C4_CLK_ROOT			= 93,
+	UART1_CLK_ROOT			= 94,
+	UART2_CLK_ROOT			= 95,
+	UART3_CLK_ROOT			= 96,
+	UART4_CLK_ROOT			= 97,
+	USB_CORE_REF_CLK_ROOT		= 98,
+	USB_PHY_REF_CLK_ROOT		= 99,
+	GIC_CLK_ROOT			= 100,
+	ECSPI1_CLK_ROOT			= 101,
+	ECSPI2_CLK_ROOT			= 102,
+	PWM1_CLK_ROOT			= 103,
+	PWM2_CLK_ROOT			= 104,
+	PWM3_CLK_ROOT			= 105,
+	PWM4_CLK_ROOT			= 106,
+	GPT1_CLK_ROOT			= 107,
+	GPT2_CLK_ROOT			= 108,
+	GPT3_CLK_ROOT			= 109,
+	GPT4_CLK_ROOT			= 110,
+	GPT5_CLK_ROOT			= 111,
+	GPT6_CLK_ROOT			= 112,
+	TRACE_CLK_ROOT			= 113,
+	WDOG_CLK_ROOT			= 114,
+	WRCLK_CLK_ROOT			= 115,
+	IPP_DO_CLKO1			= 116,
+	IPP_DO_CLKO2			= 117,
+	MIPI_DSI_CORE_CLK_ROOT		= 118,
+	DISPLAY_DSI_PHY_REF_CLK_ROOT	= 119,
+	MIPI_DSI_DBI_CLK_ROOT		= 120,
+	USDHC3_CLK_ROOT			= 121,
+	DISPLAY_CAMERA_PIXEL_CLK_ROOT	= 122,
+	MIPI_CSI1_PHY_REF_CLK_ROOT	= 123,
+	MIPI_CSI2_PHY_REF_CLK_ROOT	= 126,
+	MIPI_CSI2_ESC_CLK_ROOT		= 127,
+	ECSPI3_CLK_ROOT			= 131,
+	PDM_CLK_ROOT			= 132,
+	SAI7_CLK_ROOT			= 134,
+	CLK_ROOT_MAX,
+};
+#else
+enum clk_root_index {
+	ARM_A53_CLK_ROOT		= 0,
+	ARM_M4_CLK_ROOT			= 1,
+	VPU_A53_CLK_ROOT		= 2,
+	GPU3D_CLK_ROOT			= 3,
+	GPU2D_CLK_ROOT			= 4,
+	MAIN_AXI_CLK_ROOT		= 16,
+	ENET_AXI_CLK_ROOT		= 17,
+	NAND_USDHC_BUS_CLK_ROOT		= 18,
+	VPU_BUS_CLK_ROOT		= 19,
+	DISPLAY_AXI_CLK_ROOT		= 20,
+	DISPLAY_APB_CLK_ROOT		= 21,
+	DISPLAY_RTRM_CLK_ROOT		= 22,
+	USB_BUS_CLK_ROOT		= 23,
+	GPU_AXI_CLK_ROOT		= 24,
+	GPU_AHB_CLK_ROOT		= 25,
+	NOC_CLK_ROOT			= 26,
+	NOC_APB_CLK_ROOT		= 27,
+	AHB_CLK_ROOT			= 32,
+	IPG_CLK_ROOT			= 33,
+	AUDIO_AHB_CLK_ROOT		= 34,
+	MIPI_DSI_ESC_RX_CLK_ROOT	= 36,
+	DRAM_SEL_CFG			= 48,
+	CORE_SEL_CFG			= 49,
+	DRAM_ALT_CLK_ROOT		= 64,
+	DRAM_APB_CLK_ROOT		= 65,
+	VPU_G1_CLK_ROOT			= 66,
+	VPU_G2_CLK_ROOT			= 67,
+	DISPLAY_DTRC_CLK_ROOT		= 68,
+	DISPLAY_DC8000_CLK_ROOT		= 69,
+	PCIE_CTRL_CLK_ROOT		= 70,
+	PCIE_PHY_CLK_ROOT		= 71,
+	PCIE_AUX_CLK_ROOT		= 72,
+	DC_PIXEL_CLK_ROOT		= 73,
+	LCDIF_PIXEL_CLK_ROOT		= 74,
+	SAI1_CLK_ROOT			= 75,
+	SAI2_CLK_ROOT			= 76,
+	SAI3_CLK_ROOT			= 77,
+	SAI4_CLK_ROOT			= 78,
+	SAI5_CLK_ROOT			= 79,
+	SAI6_CLK_ROOT			= 80,
+	SPDIF1_CLK_ROOT			= 81,
+	SPDIF2_CLK_ROOT			= 82,
+	ENET_REF_CLK_ROOT		= 83,
+	ENET_TIMER_CLK_ROOT		= 84,
+	ENET_PHY_REF_CLK_ROOT		= 85,
+	NAND_CLK_ROOT			= 86,
+	QSPI_CLK_ROOT			= 87,
+	USDHC1_CLK_ROOT			= 88,
+	USDHC2_CLK_ROOT			= 89,
+	I2C1_CLK_ROOT			= 90,
+	I2C2_CLK_ROOT			= 91,
+	I2C3_CLK_ROOT			= 92,
+	I2C4_CLK_ROOT			= 93,
+	UART1_CLK_ROOT			= 94,
+	UART2_CLK_ROOT			= 95,
+	UART3_CLK_ROOT			= 96,
+	UART4_CLK_ROOT			= 97,
+	USB_CORE_REF_CLK_ROOT		= 98,
+	USB_PHY_REF_CLK_ROOT		= 99,
+	GIC_CLK_ROOT			= 100,
+	ECSPI1_CLK_ROOT			= 101,
+	ECSPI2_CLK_ROOT			= 102,
+	PWM1_CLK_ROOT			= 103,
+	PWM2_CLK_ROOT			= 104,
+	PWM3_CLK_ROOT			= 105,
+	PWM4_CLK_ROOT			= 106,
+	GPT1_CLK_ROOT			= 107,
+	GPT2_CLK_ROOT			= 108,
+	GPT3_CLK_ROOT			= 109,
+	GPT4_CLK_ROOT			= 110,
+	GPT5_CLK_ROOT			= 111,
+	GPT6_CLK_ROOT			= 112,
+	TRACE_CLK_ROOT			= 113,
+	WDOG_CLK_ROOT			= 114,
+	WRCLK_CLK_ROOT			= 115,
+	IPP_DO_CLKO1			= 116,
+	IPP_DO_CLKO2			= 117,
+	MIPI_DSI_CORE_CLK_ROOT		= 118,
+	MIPI_DSI_PHY_REF_CLK_ROOT	= 119,
+	MIPI_DSI_DBI_CLK_ROOT		= 120,
+	USDHC3_CLK_ROOT			= 121,
+	MIPI_CSI1_CORE_CLK_ROOT		= 122,
+	MIPI_CSI1_PHY_REF_CLK_ROOT	= 123,
+	MIPI_CSI1_ESC_CLK_ROOT		= 124,
+	MIPI_CSI2_CORE_CLK_ROOT		= 125,
+	MIPI_CSI2_PHY_REF_CLK_ROOT	= 126,
+	MIPI_CSI2_ESC_CLK_ROOT		= 127,
+	PCIE2_CTRL_CLK_ROOT		= 128,
+	PCIE2_PHY_CLK_ROOT		= 129,
+	PCIE2_AUX_CLK_ROOT		= 130,
+	ECSPI3_CLK_ROOT			= 131,
+	PDM_CLK_ROOT			= 132,
+	VPU_H1_CLK_ROOT			= 133,
+	CLK_ROOT_MAX,
+};
+#endif
+
+enum clk_root_src {
+	OSC_24M_CLK,
+	ARM_PLL_CLK,
+	DRAM_PLL1_CLK,
+	VIDEO_PLL2_CLK,
+	VPU_PLL_CLK,
+	GPU_PLL_CLK,
+	SYSTEM_PLL1_800M_CLK,
+	SYSTEM_PLL1_400M_CLK,
+	SYSTEM_PLL1_266M_CLK,
+	SYSTEM_PLL1_200M_CLK,
+	SYSTEM_PLL1_160M_CLK,
+	SYSTEM_PLL1_133M_CLK,
+	SYSTEM_PLL1_100M_CLK,
+	SYSTEM_PLL1_80M_CLK,
+	SYSTEM_PLL1_40M_CLK,
+	SYSTEM_PLL2_1000M_CLK,
+	SYSTEM_PLL2_500M_CLK,
+	SYSTEM_PLL2_333M_CLK,
+	SYSTEM_PLL2_250M_CLK,
+	SYSTEM_PLL2_200M_CLK,
+	SYSTEM_PLL2_166M_CLK,
+	SYSTEM_PLL2_125M_CLK,
+	SYSTEM_PLL2_100M_CLK,
+	SYSTEM_PLL2_50M_CLK,
+	SYSTEM_PLL3_CLK,
+	AUDIO_PLL1_CLK,
+	AUDIO_PLL2_CLK,
+	VIDEO_PLL_CLK,
+	OSC_32K_CLK,
+	EXT_CLK_1,
+	EXT_CLK_2,
+	EXT_CLK_3,
+	EXT_CLK_4,
+	OSC_HDMI_CLK,
+	ARM_A53_ALT_CLK,
+};
+
+enum clk_ccgr_index {
+	CCGR_DVFS = 0,
+	CCGR_ANAMIX = 1,
+	CCGR_CPU = 2,
+	CCGR_CSU = 3,
+	CCGR_DEBUG = 4,
+	CCGR_DDR1 = 5,
+	CCGR_ECSPI1 = 7,
+	CCGR_ECSPI2 = 8,
+	CCGR_ECSPI3 = 9,
+	CCGR_ENET1 = 10,
+	CCGR_GPIO1 = 11,
+	CCGR_GPIO2 = 12,
+	CCGR_GPIO3 = 13,
+	CCGR_GPIO4 = 14,
+	CCGR_GPIO5 = 15,
+	CCGR_GPT1 = 16,
+	CCGR_GPT2 = 17,
+	CCGR_GPT3 = 18,
+	CCGR_GPT4 = 19,
+	CCGR_AAM_8MP = 20,
+	CCGR_GPT5 = 20,
+	CCGR_GPT6 = 21,
+	CCGR_HS = 22,
+	CCGR_I2C1 = 23,
+	CCGR_I2C2 = 24,
+	CCGR_I2C3 = 25,
+	CCGR_I2C4 = 26,
+	CCGR_IOMUX = 27,
+	CCGR_IOMUX1 = 28,
+	CCGR_IOMUX2 = 29,
+	CCGR_IOMUX3 = 30,
+	CCGR_IOMUX4 = 31,
+	CCGR_SNVSMIX_IPG_CLK = 32,
+	CCGR_MU = 33,
+	CCGR_OCOTP = 34,
+	CCGR_OCRAM = 35,
+	CCGR_OCRAM_S = 36,
+	CCGR_PCIE = 37,
+	CCGR_PERFMON1 = 38,
+	CCGR_PERFMON2 = 39,
+	CCGR_PWM1 = 40,
+	CCGR_PWM2 = 41,
+	CCGR_PWM3 = 42,
+	CCGR_PWM4 = 43,
+	CCGR_QOS = 44,
+	CCGR_QOS_DISPMIX = 45,
+	CCGR_QOS_ETHENET = 46,
+	CCGR_QSPI = 47,
+	CCGR_RAWNAND = 48,
+	CCGR_RDC = 49,
+	CCGR_ROM = 50,
+	CCGR_I2C5_8MP = 51,
+	CCGR_SAI1 = 51,
+	CCGR_I2C6_8MP = 52,
+	CCGR_SAI2 = 52,
+	CCGR_SAI3 = 53,
+	CCGR_SAI4 = 54,
+	CCGR_SAI5 = 55,
+	CCGR_SAI6 = 56,
+	CCGR_SCTR = 57,
+	CCGR_SDMA1 = 58,
+	CCGR_SDMA2 = 59,
+	CCGR_SEC_DEBUG = 60,
+	CCGR_SEMA1 = 61,
+	CCGR_SEMA2 = 62,
+	CCGR_IRQ_STEER_8MP = 63,
+	CCGR_SIM_DISPLAY = 63,
+	CCGR_SIM_ENET = 64,
+	CCGR_SIM_M = 65,
+	CCGR_SIM_MAIN = 66,
+	CCGR_SIM_S = 67,
+	CCGR_SIM_WAKEUP = 68,
+	CCGR_GPU2D_8MP = 69,
+	CCGR_SIM_HSIO = 69,
+	CCGR_GPU3D_8MP = 70,
+	CCGR_SIM_VPU = 70,
+	CCGR_SNVS = 71,
+	CCGR_TRACE = 72,
+	CCGR_UART1 = 73,
+	CCGR_UART2 = 74,
+	CCGR_UART3 = 75,
+	CCGR_UART4 = 76,
+	CCGR_USB_MSCALE_PL301 = 77,
+	CCGR_USB_PHY_8MP = 79,
+	CCGR_GPU3D = 79,
+	CCGR_USDHC1 = 81,
+	CCGR_USDHC2 = 82,
+	CCGR_WDOG1 = 83,
+	CCGR_WDOG2 = 84,
+	CCGR_WDOG3 = 85,
+	CCGR_VPUG1 = 86,
+	CCGR_GPU_BUS = 87,
+	CCGR_VPUH1 = 89,
+	CCGR_VPUG2 = 90,
+	CCGR_PDM = 91,
+	CCGR_GIC = 92,
+	CCGR_DISPMIX = 93,
+	CCGR_USDHC3 = 94,
+	CCGR_SDMA3 = 95,
+	CCGR_XTAL = 96,
+	CCGR_PLL = 97,
+	CCGR_TEMP_SENSOR = 98,
+	CCGR_VPUMIX_BUS = 99,
+	CCGR_SAI7 = 101,
+	CCGR_GPU2D = 102,
+	CCGR_MAX
+};
+
+enum clk_src_index {
+	CLK_SRC_CKIL_SYNC_REQ = 0,
+	CLK_SRC_ARM_PLL_EN = 1,
+	CLK_SRC_GPU_PLL_EN = 2,
+	CLK_SRC_VPU_PLL_EN = 3,
+	CLK_SRC_DRAM_PLL_EN = 4,
+	CLK_SRC_SYSTEM_PLL1_EN = 5,
+	CLK_SRC_SYSTEM_PLL2_EN = 6,
+	CLK_SRC_SYSTEM_PLL3_EN = 7,
+	CLK_SRC_AUDIO_PLL1_EN = 8,
+	CLK_SRC_AUDIO_PLL2_EN = 9,
+	CLK_SRC_VIDEO_PLL1_EN = 10,
+	CLK_SRC_RESERVED = 11,
+	CLK_SRC_ARM_PLL = 12,
+	CLK_SRC_GPU_PLL = 13,
+	CLK_SRC_VPU_PLL = 14,
+	CLK_SRC_DRAM_PLL = 15,
+	CLK_SRC_SYSTEM_PLL1_800M = 16,
+	CLK_SRC_SYSTEM_PLL1_400M = 17,
+	CLK_SRC_SYSTEM_PLL1_266M = 18,
+	CLK_SRC_SYSTEM_PLL1_200M = 19,
+	CLK_SRC_SYSTEM_PLL1_160M = 20,
+	CLK_SRC_SYSTEM_PLL1_133M = 21,
+	CLK_SRC_SYSTEM_PLL1_100M = 22,
+	CLK_SRC_SYSTEM_PLL1_80M = 23,
+	CLK_SRC_SYSTEM_PLL1_40M = 24,
+	CLK_SRC_SYSTEM_PLL2_1000M = 25,
+	CLK_SRC_SYSTEM_PLL2_500M = 26,
+	CLK_SRC_SYSTEM_PLL2_333M = 27,
+	CLK_SRC_SYSTEM_PLL2_250M = 28,
+	CLK_SRC_SYSTEM_PLL2_200M = 29,
+	CLK_SRC_SYSTEM_PLL2_166M = 30,
+	CLK_SRC_SYSTEM_PLL2_125M = 31,
+	CLK_SRC_SYSTEM_PLL2_100M = 32,
+	CLK_SRC_SYSTEM_PLL2_50M = 33,
+	CLK_SRC_SYSTEM_PLL3 = 34,
+	CLK_SRC_AUDIO_PLL1 = 35,
+	CLK_SRC_AUDIO_PLL2 = 36,
+	CLK_SRC_VIDEO_PLL1 = 37,
+};
+
+#define INTPLL_LOCK_MASK			BIT(31)
+#define INTPLL_LOCK_SEL_MASK			BIT(29)
+#define INTPLL_EXT_BYPASS_MASK			BIT(28)
+#define INTPLL_DIV20_CLKE_MASK			BIT(27)
+#define INTPLL_DIV20_CLKE_OVERRIDE_MASK		BIT(26)
+#define INTPLL_DIV10_CLKE_MASK			BIT(25)
+#define INTPLL_DIV10_CLKE_OVERRIDE_MASK		BIT(24)
+#define INTPLL_DIV8_CLKE_MASK			BIT(23)
+#define INTPLL_DIV8_CLKE_OVERRIDE_MASK		BIT(22)
+#define INTPLL_DIV6_CLKE_MASK			BIT(21)
+#define INTPLL_DIV6_CLKE_OVERRIDE_MASK		BIT(20)
+#define INTPLL_DIV5_CLKE_MASK			BIT(19)
+#define INTPLL_DIV5_CLKE_OVERRIDE_MASK		BIT(18)
+#define INTPLL_DIV4_CLKE_MASK			BIT(17)
+#define INTPLL_DIV4_CLKE_OVERRIDE_MASK		BIT(16)
+#define INTPLL_DIV3_CLKE_MASK			BIT(15)
+#define INTPLL_DIV3_CLKE_OVERRIDE_MASK		BIT(14)
+#define INTPLL_DIV2_CLKE_MASK			BIT(13)
+#define INTPLL_DIV2_CLKE_OVERRIDE_MASK		BIT(12)
+#define INTPLL_CLKE_MASK			BIT(11)
+#define INTPLL_CLKE_OVERRIDE_MASK		BIT(10)
+#define INTPLL_RST_MASK				BIT(9)
+#define INTPLL_RST_OVERRIDE_MASK		BIT(8)
+#define INTPLL_BYPASS_MASK			BIT(4)
+#define INTPLL_PAD_CLK_SEL_MASK			GENMASK(3, 2)
+#define INTPLL_REF_CLK_SEL_MASK			GENMASK(1, 0)
+
+#define INTPLL_MAIN_DIV_MASK		GENMASK(21, 12)
+#define INTPLL_MAIN_DIV_VAL(n)		((n << 12) & GENMASK(21, 12))
+#define INTPLL_MAIN_DIV_SHIFT		12
+#define INTPLL_PRE_DIV_MASK		GENMASK(9, 4)
+#define INTPLL_PRE_DIV_VAL(n)		((n << 4) & GENMASK(9, 4))
+#define INTPLL_PRE_DIV_SHIFT		4
+#define INTPLL_POST_DIV_MASK		GENMASK(2, 0)
+#define INTPLL_POST_DIV_VAL(n)		((n << 0) & GENMASK(2, 0))
+#define INTPLL_POST_DIV_SHIFT		0
+
+#define INTPLL_LOCK_CON_DLY_MASK	GENMASK(5, 4)
+#define INTPLL_LOCK_CON_DLY_SHIFT	4
+#define INTPLL_LOCK_CON_OUT_MASK	GENMASK(3, 2)
+#define INTPLL_LOCK_CON_OUT_SHIFT	2
+#define INTPLL_LOCK_CON_IN_MASK		GENMASK(1, 0)
+#define INTPLL_LOCK_CON_IN_SHIFT	0
+
+#define INTPLL_LRD_EN_MASK		BIT(21)
+#define INTPLL_FOUT_MASK		BIT(20)
+#define INTPLL_AFC_SEL_MASK		BIT(19)
+#define INTPLL_PBIAS_CTRL_MASK		BIT(18)
+#define INTPLL_PBIAS_CTRL_EN_MASK	BIT(17)
+#define INTPLL_AFCINIT_SEL_MASK		BIT(16)
+#define INTPLL_FSEL_MASK		BIT(14)
+#define INTPLL_FEED_EN_MASK		BIT(13)
+#define INTPLL_EXTAFC_MASK		GENMASK(7, 3)
+#define INTPLL_AFC_EN_MASK		BIT(2)
+#define INTPLL_ICP_MASK			GENMASK(1, 0)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock_imx8mq.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock_imx8mq.h
new file mode 100644
index 000000000..340a61e55
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/clock_imx8mq.h
@@ -0,0 +1,431 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#ifndef _ASM_ARCH_IMX8M_CLOCK_H
+#define _ASM_ARCH_IMX8M_CLOCK_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+enum pll_clocks {
+	ANATOP_ARM_PLL,
+	ANATOP_GPU_PLL,
+	ANATOP_SYSTEM_PLL1,
+	ANATOP_SYSTEM_PLL2,
+	ANATOP_SYSTEM_PLL3,
+	ANATOP_AUDIO_PLL1,
+	ANATOP_AUDIO_PLL2,
+	ANATOP_VIDEO_PLL1,
+	ANATOP_VIDEO_PLL2,
+	ANATOP_DRAM_PLL,
+};
+
+enum clk_root_index {
+	ARM_A53_CLK_ROOT		= 0,
+	ARM_M4_CLK_ROOT			= 1,
+	VPU_A53_CLK_ROOT		= 2,
+	GPU_CORE_CLK_ROOT		= 3,
+	GPU_SHADER_CLK_ROOT		= 4,
+	MAIN_AXI_CLK_ROOT		= 16,
+	ENET_AXI_CLK_ROOT		= 17,
+	NAND_USDHC_BUS_CLK_ROOT		= 18,
+	VPU_BUS_CLK_ROOT		= 19,
+	DISPLAY_AXI_CLK_ROOT		= 20,
+	DISPLAY_APB_CLK_ROOT		= 21,
+	DISPLAY_RTRM_CLK_ROOT		= 22,
+	USB_BUS_CLK_ROOT		= 23,
+	GPU_AXI_CLK_ROOT		= 24,
+	GPU_AHB_CLK_ROOT		= 25,
+	NOC_CLK_ROOT			= 26,
+	NOC_APB_CLK_ROOT		= 27,
+	AHB_CLK_ROOT			= 32,
+	IPG_CLK_ROOT			= 33,
+	AUDIO_AHB_CLK_ROOT		= 34,
+	MIPI_DSI_ESC_RX_CLK_ROOT	= 36,
+	DRAM_SEL_CFG			= 48,
+	CORE_SEL_CFG			= 49,
+	DRAM_ALT_CLK_ROOT		= 64,
+	DRAM_APB_CLK_ROOT		= 65,
+	VPU_G1_CLK_ROOT			= 66,
+	VPU_G2_CLK_ROOT			= 67,
+	DISPLAY_DTRC_CLK_ROOT		= 68,
+	DISPLAY_DC8000_CLK_ROOT		= 69,
+	PCIE1_CTRL_CLK_ROOT		= 70,
+	PCIE1_PHY_CLK_ROOT		= 71,
+	PCIE1_AUX_CLK_ROOT		= 72,
+	DC_PIXEL_CLK_ROOT		= 73,
+	LCDIF_PIXEL_CLK_ROOT		= 74,
+	SAI1_CLK_ROOT			= 75,
+	SAI2_CLK_ROOT			= 76,
+	SAI3_CLK_ROOT			= 77,
+	SAI4_CLK_ROOT			= 78,
+	SAI5_CLK_ROOT			= 79,
+	SAI6_CLK_ROOT			= 80,
+	SPDIF1_CLK_ROOT			= 81,
+	SPDIF2_CLK_ROOT			= 82,
+	ENET_REF_CLK_ROOT		= 83,
+	ENET_TIMER_CLK_ROOT		= 84,
+	ENET_PHY_REF_CLK_ROOT		= 85,
+	NAND_CLK_ROOT			= 86,
+	QSPI_CLK_ROOT			= 87,
+	USDHC1_CLK_ROOT			= 88,
+	USDHC2_CLK_ROOT			= 89,
+	I2C1_CLK_ROOT			= 90,
+	I2C2_CLK_ROOT			= 91,
+	I2C3_CLK_ROOT			= 92,
+	I2C4_CLK_ROOT			= 93,
+	UART1_CLK_ROOT			= 94,
+	UART2_CLK_ROOT			= 95,
+	UART3_CLK_ROOT			= 96,
+	UART4_CLK_ROOT			= 97,
+	USB_CORE_REF_CLK_ROOT		= 98,
+	USB_PHY_REF_CLK_ROOT		= 99,
+	GIC_CLK_ROOT			= 100,
+	ECSPI1_CLK_ROOT			= 101,
+	ECSPI2_CLK_ROOT			= 102,
+	PWM1_CLK_ROOT			= 103,
+	PWM2_CLK_ROOT			= 104,
+	PWM3_CLK_ROOT			= 105,
+	PWM4_CLK_ROOT			= 106,
+	GPT1_CLK_ROOT			= 107,
+	GPT2_CLK_ROOT			= 108,
+	GPT3_CLK_ROOT			= 109,
+	GPT4_CLK_ROOT			= 110,
+	GPT5_CLK_ROOT			= 111,
+	GPT6_CLK_ROOT			= 112,
+	TRACE_CLK_ROOT			= 113,
+	WDOG_CLK_ROOT			= 114,
+	WRCLK_CLK_ROOT			= 115,
+	IPP_DO_CLKO1			= 116,
+	IPP_DO_CLKO2			= 117,
+	MIPI_DSI_CORE_CLK_ROOT		= 118,
+	MIPI_DSI_PHY_REF_CLK_ROOT	= 119,
+	MIPI_DSI_DBI_CLK_ROOT		= 120,
+	OLD_MIPI_DSI_ESC_CLK_ROOT	= 121,
+	MIPI_CSI1_CORE_CLK_ROOT		= 122,
+	MIPI_CSI1_PHY_REF_CLK_ROOT	= 123,
+	MIPI_CSI1_ESC_CLK_ROOT		= 124,
+	MIPI_CSI2_CORE_CLK_ROOT		= 125,
+	MIPI_CSI2_PHY_REF_CLK_ROOT	= 126,
+	MIPI_CSI2_ESC_CLK_ROOT		= 127,
+	PCIE2_CTRL_CLK_ROOT		= 128,
+	PCIE2_PHY_CLK_ROOT		= 129,
+	PCIE2_AUX_CLK_ROOT		= 130,
+	ECSPI3_CLK_ROOT			= 131,
+	OLD_MIPI_DSI_ESC_RX_ROOT	= 132,
+	DISPLAY_HDMI_CLK_ROOT		= 133,
+	CLK_ROOT_MAX,
+};
+
+enum clk_root_src {
+	OSC_25M_CLK,
+	ARM_PLL_CLK,
+	DRAM_PLL1_CLK,
+	VIDEO_PLL2_CLK,
+	VPU_PLL_CLK,
+	GPU_PLL_CLK,
+	SYSTEM_PLL1_800M_CLK,
+	SYSTEM_PLL1_400M_CLK,
+	SYSTEM_PLL1_266M_CLK,
+	SYSTEM_PLL1_200M_CLK,
+	SYSTEM_PLL1_160M_CLK,
+	SYSTEM_PLL1_133M_CLK,
+	SYSTEM_PLL1_100M_CLK,
+	SYSTEM_PLL1_80M_CLK,
+	SYSTEM_PLL1_40M_CLK,
+	SYSTEM_PLL2_1000M_CLK,
+	SYSTEM_PLL2_500M_CLK,
+	SYSTEM_PLL2_333M_CLK,
+	SYSTEM_PLL2_250M_CLK,
+	SYSTEM_PLL2_200M_CLK,
+	SYSTEM_PLL2_166M_CLK,
+	SYSTEM_PLL2_125M_CLK,
+	SYSTEM_PLL2_100M_CLK,
+	SYSTEM_PLL2_50M_CLK,
+	SYSTEM_PLL3_CLK,
+	AUDIO_PLL1_CLK,
+	AUDIO_PLL2_CLK,
+	VIDEO_PLL_CLK,
+	OSC_32K_CLK,
+	EXT_CLK_1,
+	EXT_CLK_2,
+	EXT_CLK_3,
+	EXT_CLK_4,
+	OSC_27M_CLK,
+	ARM_A53_ALT_CLK,
+};
+
+/* CCGR index */
+enum clk_ccgr_index {
+	CCGR_DVFS = 0,
+	CCGR_ANAMIX = 1,
+	CCGR_CPU = 2,
+	CCGR_CSU = 4,
+	CCGR_DRAM1 = 5,
+	CCGR_DRAM2_OBSOLETE = 6,
+	CCGR_ECSPI1 = 7,
+	CCGR_ECSPI2 = 8,
+	CCGR_ECSPI3 = 9,
+	CCGR_ENET1 = 10,
+	CCGR_GPIO1 = 11,
+	CCGR_GPIO2 = 12,
+	CCGR_GPIO3 = 13,
+	CCGR_GPIO4 = 14,
+	CCGR_GPIO5 = 15,
+	CCGR_GPT1 = 16,
+	CCGR_GPT2 = 17,
+	CCGR_GPT3 = 18,
+	CCGR_GPT4 = 19,
+	CCGR_GPT5 = 20,
+	CCGR_GPT6 = 21,
+	CCGR_HS = 22,
+	CCGR_I2C1 = 23,
+	CCGR_I2C2 = 24,
+	CCGR_I2C3 = 25,
+	CCGR_I2C4 = 26,
+	CCGR_IOMUX = 27,
+	CCGR_IOMUX1 = 28,
+	CCGR_IOMUX2 = 29,
+	CCGR_IOMUX3 = 30,
+	CCGR_IOMUX4 = 31,
+	CCGR_M4 = 32,
+	CCGR_MU = 33,
+	CCGR_OCOTP = 34,
+	CCGR_OCRAM = 35,
+	CCGR_OCRAM_S = 36,
+	CCGR_PCIE = 37,
+	CCGR_PERFMON1 = 38,
+	CCGR_PERFMON2 = 39,
+	CCGR_PWM1 = 40,
+	CCGR_PWM2 = 41,
+	CCGR_PWM3 = 42,
+	CCGR_PWM4 = 43,
+	CCGR_QOS = 44,
+	CCGR_DISMIX = 45,
+	CCGR_MEGAMIX = 46,
+	CCGR_QSPI = 47,
+	CCGR_RAWNAND = 48,
+	CCGR_RDC = 49,
+	CCGR_ROM = 50,
+	CCGR_SAI1 = 51,
+	CCGR_SAI2 = 52,
+	CCGR_SAI3 = 53,
+	CCGR_SAI4 = 54,
+	CCGR_SAI5 = 55,
+	CCGR_SAI6 = 56,
+	CCGR_SCTR = 57,
+	CCGR_SDMA1 = 58,
+	CCGR_SDMA2 = 59,
+	CCGR_SEC_DEBUG = 60,
+	CCGR_SEMA1 = 61,
+	CCGR_SEMA2 = 62,
+	CCGR_SIM_DISPLAY = 63,
+	CCGR_SIM_ENET = 64,
+	CCGR_SIM_M = 65,
+	CCGR_SIM_MAIN = 66,
+	CCGR_SIM_S = 67,
+	CCGR_SIM_WAKEUP = 68,
+	CCGR_SIM_USB = 69,
+	CCGR_SIM_VPU = 70,
+	CCGR_SNVS = 71,
+	CCGR_TRACE = 72,
+	CCGR_UART1 = 73,
+	CCGR_UART2 = 74,
+	CCGR_UART3 = 75,
+	CCGR_UART4 = 76,
+	CCGR_USB_CTRL1 = 77,
+	CCGR_USB_CTRL2 = 78,
+	CCGR_USB_PHY1 = 79,
+	CCGR_USB_PHY2 = 80,
+	CCGR_USDHC1 = 81,
+	CCGR_USDHC2 = 82,
+	CCGR_WDOG1 = 83,
+	CCGR_WDOG2 = 84,
+	CCGR_WDOG3 = 85,
+	CCGR_VA53 = 86,
+	CCGR_GPU = 87,
+	CCGR_HEVC = 88,
+	CCGR_AVC = 89,
+	CCGR_VP9 = 90,
+	CCGR_HEVC_INTER = 91,
+	CCGR_GIC = 92,
+	CCGR_DISPLAY = 93,
+	CCGR_HDMI = 94,
+	CCGR_HDMI_PHY = 95,
+	CCGR_XTAL = 96,
+	CCGR_PLL = 97,
+	CCGR_TSENSOR = 98,
+	CCGR_VPU_DEC = 99,
+	CCGR_PCIE2 = 100,
+	CCGR_MIPI_CSI1 = 101,
+	CCGR_MIPI_CSI2 = 102,
+	CCGR_MAX,
+};
+
+/* src index */
+enum clk_src_index {
+	CLK_SRC_CKIL_SYNC_REQ = 0,
+	CLK_SRC_ARM_PLL_EN = 1,
+	CLK_SRC_GPU_PLL_EN = 2,
+	CLK_SRC_VPU_PLL_EN = 3,
+	CLK_SRC_DRAM_PLL_EN = 4,
+	CLK_SRC_SYSTEM_PLL1_EN = 5,
+	CLK_SRC_SYSTEM_PLL2_EN = 6,
+	CLK_SRC_SYSTEM_PLL3_EN = 7,
+	CLK_SRC_AUDIO_PLL1_EN = 8,
+	CLK_SRC_AUDIO_PLL2_EN = 9,
+	CLK_SRC_VIDEO_PLL1_EN = 10,
+	CLK_SRC_VIDEO_PLL2_EN = 11,
+	CLK_SRC_ARM_PLL = 12,
+	CLK_SRC_GPU_PLL = 13,
+	CLK_SRC_VPU_PLL = 14,
+	CLK_SRC_DRAM_PLL = 15,
+	CLK_SRC_SYSTEM_PLL1_800M = 16,
+	CLK_SRC_SYSTEM_PLL1_400M = 17,
+	CLK_SRC_SYSTEM_PLL1_266M = 18,
+	CLK_SRC_SYSTEM_PLL1_200M = 19,
+	CLK_SRC_SYSTEM_PLL1_160M = 20,
+	CLK_SRC_SYSTEM_PLL1_133M = 21,
+	CLK_SRC_SYSTEM_PLL1_100M = 22,
+	CLK_SRC_SYSTEM_PLL1_80M = 23,
+	CLK_SRC_SYSTEM_PLL1_40M = 24,
+	CLK_SRC_SYSTEM_PLL2_1000M = 25,
+	CLK_SRC_SYSTEM_PLL2_500M = 26,
+	CLK_SRC_SYSTEM_PLL2_333M = 27,
+	CLK_SRC_SYSTEM_PLL2_250M = 28,
+	CLK_SRC_SYSTEM_PLL2_200M = 29,
+	CLK_SRC_SYSTEM_PLL2_166M = 30,
+	CLK_SRC_SYSTEM_PLL2_125M = 31,
+	CLK_SRC_SYSTEM_PLL2_100M = 32,
+	CLK_SRC_SYSTEM_PLL2_50M = 33,
+	CLK_SRC_SYSTEM_PLL3 = 34,
+	CLK_SRC_AUDIO_PLL1 = 35,
+	CLK_SRC_AUDIO_PLL2 = 36,
+	CLK_SRC_VIDEO_PLL1 = 37,
+	CLK_SRC_VIDEO_PLL2 = 38,
+	CLK_SRC_OSC_25M = 39,
+	CLK_SRC_OSC_27M = 40,
+};
+
+/* AUDIO PLL1/2 VIDEO PLL1 GPU PLL VPU PLL ARM PLL*/
+#define FRAC_PLL_LOCK_MASK		BIT(31)
+#define FRAC_PLL_CLKE_MASK		BIT(21)
+#define FRAC_PLL_PD_MASK		BIT(19)
+#define FRAC_PLL_REFCLK_SEL_MASK	(0x3 << 16)
+#define FRAC_PLL_LOCK_SEL_MASK		BIT(15)
+#define FRAC_PLL_BYPASS_MASK		BIT(14)
+#define FRAC_PLL_COUNTCLK_SEL_MASK	BIT(13)
+#define FRAC_PLL_NEWDIV_VAL_MASK	BIT(12)
+#define FRAC_PLL_NEWDIV_ACK_MASK	BIT(11)
+#define FRAC_PLL_REFCLK_DIV_VAL(n)	(((n) << 5) & (0x3f << 5))
+#define FRAC_PLL_REFCLK_DIV_VAL_MASK	(0x3f << 5)
+#define FRAC_PLL_REFCLK_DIV_VAL_SHIFT	5
+#define FRAC_PLL_OUTPUT_DIV_VAL_MASK	0x1f
+#define FRAC_PLL_OUTPUT_DIV_VAL(n)	((n) & 0x1f)
+
+#define FRAC_PLL_REFCLK_SEL_OSC_25M	(0 << 16)
+#define FRAC_PLL_REFCLK_SEL_OSC_27M	BIT(16)
+#define FRAC_PLL_REFCLK_SEL_HDMI_PHY_27M (2 << 16)
+#define FRAC_PLL_REFCLK_SEL_CLK_PN	(3 << 16)
+
+#define FRAC_PLL_FRAC_DIV_CTL_MASK	(0x1ffffff << 7)
+#define FRAC_PLL_FRAC_DIV_CTL_SHIFT	7
+#define FRAC_PLL_INT_DIV_CTL_MASK	0x7f
+#define FRAC_PLL_INT_DIV_CTL_VAL(n)	((n) & 0x7f)
+
+/* SYS PLL1/2/3 VIDEO PLL2 DRAM PLL */
+#define SSCG_PLL_LOCK_MASK		BIT(31)
+#define SSCG_PLL_CLKE_MASK		BIT(25)
+#define SSCG_PLL_DIV2_CLKE_MASK		BIT(23)
+#define SSCG_PLL_DIV3_CLKE_MASK		BIT(21)
+#define SSCG_PLL_DIV4_CLKE_MASK		BIT(19)
+#define SSCG_PLL_DIV5_CLKE_MASK		BIT(17)
+#define SSCG_PLL_DIV6_CLKE_MASK		BIT(15)
+#define SSCG_PLL_DIV8_CLKE_MASK		BIT(13)
+#define SSCG_PLL_DIV10_CLKE_MASK	BIT(11)
+#define SSCG_PLL_DIV20_CLKE_MASK	BIT(9)
+#define SSCG_PLL_VIDEO_PLL2_CLKE_MASK	BIT(9)
+#define SSCG_PLL_DRAM_PLL_CLKE_MASK	BIT(9)
+#define SSCG_PLL_PLL3_CLKE_MASK		BIT(9)
+#define SSCG_PLL_PD_MASK		BIT(7)
+#define SSCG_PLL_BYPASS1_MASK		BIT(5)
+#define SSCG_PLL_BYPASS2_MASK		BIT(4)
+#define SSCG_PLL_LOCK_SEL_MASK		BIT(3)
+#define SSCG_PLL_COUNTCLK_SEL_MASK	BIT(2)
+#define SSCG_PLL_REFCLK_SEL_MASK	0x3
+#define SSCG_PLL_REFCLK_SEL_OSC_25M	(0)
+#define SSCG_PLL_REFCLK_SEL_OSC_27M	(1)
+#define SSCG_PLL_REFCLK_SEL_HDMI_PHY_27M (2)
+#define SSCG_PLL_REFCLK_SEL_CLK_PN	(3)
+
+#define SSCG_PLL_SSDS_MASK		BIT(8)
+#define SSCG_PLL_SSMD_MASK		(0x7 << 5)
+#define SSCG_PLL_SSMF_MASK		(0xf << 1)
+#define SSCG_PLL_SSE_MASK		0x1
+
+#define SSCG_PLL_REF_DIVR1_MASK		(0x7 << 25)
+#define SSCG_PLL_REF_DIVR1_SHIFT	25
+#define SSCG_PLL_REF_DIVR1_VAL(n)	(((n) << 25) & SSCG_PLL_REF_DIVR1_MASK)
+#define SSCG_PLL_REF_DIVR2_MASK		(0x3f << 19)
+#define SSCG_PLL_REF_DIVR2_SHIFT	19
+#define SSCG_PLL_REF_DIVR2_VAL(n)	(((n) << 19) & SSCG_PLL_REF_DIVR2_MASK)
+#define SSCG_PLL_FEEDBACK_DIV_F1_MASK	(0x3f << 13)
+#define SSCG_PLL_FEEDBACK_DIV_F1_SHIFT	13
+#define SSCG_PLL_FEEDBACK_DIV_F1_VAL(n)	(((n) << 13) & \
+					 SSCG_PLL_FEEDBACK_DIV_F1_MASK)
+#define SSCG_PLL_FEEDBACK_DIV_F2_MASK	(0x3f << 7)
+#define SSCG_PLL_FEEDBACK_DIV_F2_SHIFT	7
+#define SSCG_PLL_FEEDBACK_DIV_F2_VAL(n)	(((n) << 7) & \
+					 SSCG_PLL_FEEDBACK_DIV_F2_MASK)
+#define SSCG_PLL_OUTPUT_DIV_VAL_MASK	(0x3f << 1)
+#define SSCG_PLL_OUTPUT_DIV_VAL_SHIFT	1
+#define SSCG_PLL_OUTPUT_DIV_VAL(n)	(((n) << 1) & \
+					 SSCG_PLL_OUTPUT_DIV_VAL_MASK)
+#define SSCG_PLL_FILTER_RANGE_MASK	0x1
+
+#define HW_DIGPROG_MAJOR_UPPER_MASK	(0xff << 16)
+#define HW_DIGPROG_MAJOR_LOWER_MASK	(0xff << 8)
+#define HW_DIGPROG_MINOR_MASK		0xff
+
+#define HW_OSC_27M_CLKE_MASK		BIT(4)
+#define HW_OSC_25M_CLKE_MASK		BIT(2)
+#define HW_OSC_32K_SEL_MASK		0x1
+#define HW_OSC_32K_SEL_RTC		0x1
+#define HW_OSC_32K_SEL_25M_DIV800	0x0
+
+#define HW_FRAC_ARM_PLL_DIV_MASK	(0x7 << 20)
+#define HW_FRAC_ARM_PLL_DIV_SHIFT	20
+#define HW_FRAC_VPU_PLL_DIV_MASK	(0x7 << 16)
+#define HW_FRAC_VPU_PLL_DIV_SHIFT	16
+#define HW_FRAC_GPU_PLL_DIV_MASK	(0x7 << 12)
+#define HW_FRAC_GPU_PLL_DIV_SHIFT	12
+#define HW_FRAC_VIDEO_PLL1_DIV_MASK	(0x7 << 10)
+#define HW_FRAC_VIDEO_PLL1_DIV_SHIFT	10
+#define HW_FRAC_AUDIO_PLL2_DIV_MASK	(0x7 << 4)
+#define HW_FRAC_AUDIO_PLL2_DIV_SHIFT	4
+#define HW_FRAC_AUDIO_PLL1_DIV_MASK	0x7
+#define HW_FRAC_AUDIO_PLL1_DIV_SHIFT	0
+
+#define HW_SSCG_VIDEO_PLL2_DIV_MASK	(0x7 << 16)
+#define HW_SSCG_VIDEO_PLL2_DIV_SHIFT	16
+#define HW_SSCG_DRAM_PLL_DIV_MASK	(0x7 << 14)
+#define HW_SSCG_DRAM_PLL_DIV_SHIFT	14
+#define HW_SSCG_SYSTEM_PLL3_DIV_MASK	(0x7 << 8)
+#define HW_SSCG_SYSTEM_PLL3_DIV_SHIFT	8
+#define HW_SSCG_SYSTEM_PLL2_DIV_MASK	(0x7 << 4)
+#define HW_SSCG_SYSTEM_PLL2_DIV_SHIFT	4
+#define HW_SSCG_SYSTEM_PLL1_DIV_MASK	0x7
+#define HW_SSCG_SYSTEM_PLL1_DIV_SHIFT	0
+
+enum frac_pll_out_val {
+	FRAC_PLL_OUT_1000M,
+	FRAC_PLL_OUT_800M,
+};
+
+void init_nand_clk(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/crm_regs.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/crm_regs.h
new file mode 100644
index 000000000..c42e6685d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/crm_regs.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ */
+
+#ifndef _ASM_ARCH_IMX8M_CRM_REGS_H
+#define _ASM_ARCH_IMX8M_CRM_REGS_H
+/* Dummy header, some imx-common code needs this file */
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/ddr.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/ddr.h
new file mode 100644
index 000000000..0f1e832c0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/ddr.h
@@ -0,0 +1,750 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8M_DDR_H
+#define __ASM_ARCH_IMX8M_DDR_H
+
+#include <asm/io.h>
+#include <asm/types.h>
+#include <asm/arch/ddr.h>
+
+#define DDRC_DDR_SS_GPR0		0x3d000000
+#define DDRC_IPS_BASE_ADDR_0		0x3f400000
+#define IP2APB_DDRPHY_IPS_BASE_ADDR(X)	(0x3c000000 + (X * 0x2000000))
+#define DDRPHY_MEM(X)			(0x3c000000 + (X * 0x2000000) + 0x50000)
+
+struct ddrc_freq {
+	u32 res0[8];
+	u32 derateen;
+	u32 derateint;
+	u32 res1[10];
+	u32 rfshctl0;
+	u32 res2[4];
+	u32 rfshtmg;
+	u32 rfshtmg1;
+	u32 res3[28];
+	u32 init3;
+	u32 init4;
+	u32 res;
+	u32 init6;
+	u32 init7;
+	u32 res4[4];
+	u32 dramtmg0;
+	u32 dramtmg1;
+	u32 dramtmg2;
+	u32 dramtmg3;
+	u32 dramtmg4;
+	u32 dramtmg5;
+	u32 dramtmg6;
+	u32 dramtmg7;
+	u32 dramtmg8;
+	u32 dramtmg9;
+	u32 dramtmg10;
+	u32 dramtmg11;
+	u32 dramtmg12;
+	u32 dramtmg13;
+	u32 dramtmg14;
+	u32 dramtmg15;
+	u32 dramtmg16;
+	u32 dramtmg17;
+	u32 res5[10];
+	u32 mramtmg0;
+	u32 mramtmg1;
+	u32 mramtmg4;
+	u32 mramtmg9;
+	u32 zqctl0;
+	u32 res6[3];
+	u32 dfitmg0;
+	u32 dfitmg1;
+	u32 res7[7];
+	u32 dfitmg2;
+	u32 dfitmg3;
+	u32 res8[33];
+	u32 odtcfg;
+};
+
+struct imx8m_ddrc_regs {
+	u32 mstr;
+	u32 stat;
+	u32 mstr1;
+	u32 res1;
+	u32 mrctrl0;
+	u32 mrctrl1;
+	u32 mrstat;
+	u32 mrctrl2;
+	u32 derateen;
+	u32 derateint;
+	u32 mstr2;
+	u32 res2;
+	u32 pwrctl;
+	u32 pwrtmg;
+	u32 hwlpctl;
+	u32 hwffcctl;
+	u32 hwffcstat;
+	u32 res3[3];
+	u32 rfshctl0;
+	u32 rfshctl1;
+	u32 rfshctl2;
+	u32 rfshctl4;
+	u32 rfshctl3;
+	u32 rfshtmg;
+	u32 rfshtmg1;
+	u32 res4;
+	u32 ecccfg0;
+	u32 ecccfg1;
+	u32 eccstat;
+	u32 eccclr;
+	u32 eccerrcnt;
+	u32 ecccaddr0;
+	u32 ecccaddr1;
+	u32 ecccsyn0;
+	u32 ecccsyn1;
+	u32 ecccsyn2;
+	u32 eccbitmask0;
+	u32 eccbitmask1;
+	u32 eccbitmask2;
+	u32 eccuaddr0;
+	u32 eccuaddr1;
+	u32 eccusyn0;
+	u32 eccusyn1;
+	u32 eccusyn2;
+	u32 eccpoisonaddr0;
+	u32 eccpoisonaddr1;
+	u32 crcparctl0;
+	u32 crcparctl1;
+	u32 crcparctl2;
+	u32 crcparstat;
+	u32 init0;
+	u32 init1;
+	u32 init2;
+	u32 init3;
+	u32 init4;
+	u32 init5;
+	u32 init6;
+	u32 init7;
+	u32 dimmctl;
+	u32 rankctl;
+	u32 res5;
+	u32 chctl;
+	u32 dramtmg0;
+	u32 dramtmg1;
+	u32 dramtmg2;
+	u32 dramtmg3;
+	u32 dramtmg4;
+	u32 dramtmg5;
+	u32 dramtmg6;
+	u32 dramtmg7;
+	u32 dramtmg8;
+	u32 dramtmg9;
+	u32 dramtmg10;
+	u32 dramtmg11;
+	u32 dramtmg12;
+	u32 dramtmg13;
+	u32 dramtmg14;
+	u32 dramtmg15;
+	u32 dramtmg16;
+	u32 dramtmg17;
+	u32 res6[10];
+	u32 mramtmg0;
+	u32 mramtmg1;
+	u32 mramtmg4;
+	u32 mramtmg9;
+	u32 zqctl0;
+	u32 zqctl1;
+	u32 zqctl2;
+	u32 zqstat;
+	u32 dfitmg0;
+	u32 dfitmg1;
+	u32 dfilpcfg0;
+	u32 dfilpcfg1;
+	u32 dfiupd0;
+	u32 dfiupd1;
+	u32 dfiupd2;
+	u32 res7;
+	u32 dfimisc;
+	u32 dfitmg2;
+	u32 dfitmg3;
+	u32 dfistat;
+	u32 dbictl;
+	u32 dfiphymstr;
+	u32 res8[14];
+	u32 addrmap0;
+	u32 addrmap1;
+	u32 addrmap2;
+	u32 addrmap3;
+	u32 addrmap4;
+	u32 addrmap5;
+	u32 addrmap6;
+	u32 addrmap7;
+	u32 addrmap8;
+	u32 addrmap9;
+	u32 addrmap10;
+	u32 addrmap11;
+	u32 res9[4];
+	u32 odtcfg;
+	u32 odtmap;
+	u32 res10[2];
+	u32 sched;
+	u32 sched1;
+	u32 sched2;
+	u32 perfhpr1;
+	u32 res11;
+	u32 perflpr1;
+	u32 res12;
+	u32 perfwr1;
+	u32 res13[4];
+	u32 dqmap0;
+	u32 dqmap1;
+	u32 dqmap2;
+	u32 dqmap3;
+	u32 dqmap4;
+	u32 dqmap5;
+	u32 res14[26];
+	u32 dbg0;
+	u32 dbg1;
+	u32 dbgcam;
+	u32 dbgcmd;
+	u32 dbgstat;
+	u32 res15[3];
+	u32 swctl;
+	u32 swstat;
+	u32 res16[2];
+	u32 ocparcfg0;
+	u32 ocparcfg1;
+	u32 ocparcfg2;
+	u32 ocparcfg3;
+	u32 ocparstat0;
+	u32 ocparstat1;
+	u32 ocparwlog0;
+	u32 ocparwlog1;
+	u32 ocparwlog2;
+	u32 ocparawlog0;
+	u32 ocparawlog1;
+	u32 ocparrlog0;
+	u32 ocparrlog1;
+	u32 ocpararlog0;
+	u32 ocpararlog1;
+	u32 poisoncfg;
+	u32 poisonstat;
+	u32 adveccindex;
+	union  {
+		u32 adveccstat;
+		u32 eccapstat;
+	};
+	u32 eccpoisonpat0;
+	u32 eccpoisonpat1;
+	u32 eccpoisonpat2;
+	u32 res17[6];
+	u32 caparpoisonctl;
+	u32 caparpoisonstat;
+	u32 res18[2];
+	u32 dynbsmstat;
+	u32 res19[18];
+	u32 pstat;
+	u32 pccfg;
+	struct {
+		u32 pcfgr;
+		u32 pcfgw;
+		u32 pcfgc;
+		struct {
+			u32 pcfgidmaskch0;
+			u32 pcfidvaluech0;
+		} pcfgid[16];
+		u32 pctrl;
+		u32 pcfgqos0;
+		u32 pcfgqos1;
+		u32 pcfgwqos0;
+		u32 pcfgwqos1;
+		u32 res[4];
+	} pcfg[16];
+	struct {
+		u32 sarbase;
+		u32 sarsize;
+	} sar[4];
+	u32 sbrctl;
+	u32 sbrstat;
+	u32 sbrwdata0;
+	u32 sbrwdata1;
+	u32 pdch;
+	u32 res20[755];
+	/* umctl2_regs_dch1 */
+	u32 ch1_stat;
+	u32 res21[2];
+	u32 ch1_mrctrl0;
+	u32 ch1_mrctrl1;
+	u32 ch1_mrstat;
+	u32 ch1_mrctrl2;
+	u32 res22[4];
+	u32 ch1_pwrctl;
+	u32 ch1_pwrtmg;
+	u32 ch1_hwlpctl;
+	u32 res23[15];
+	u32 ch1_eccstat;
+	u32 ch1_eccclr;
+	u32 ch1_eccerrcnt;
+	u32 ch1_ecccaddr0;
+	u32 ch1_ecccaddr1;
+	u32 ch1_ecccsyn0;
+	u32 ch1_ecccsyn1;
+	u32 ch1_ecccsyn2;
+	u32 ch1_eccbitmask0;
+	u32 ch1_eccbitmask1;
+	u32 ch1_eccbitmask2;
+	u32 ch1_eccuaddr0;
+	u32 ch1_eccuaddr1;
+	u32 ch1_eccusyn0;
+	u32 ch1_eccusyn1;
+	u32 ch1_eccusyn2;
+	u32 res24[2];
+	u32 ch1_crcparctl0;
+	u32 res25[2];
+	u32 ch1_crcparstat;
+	u32 res26[46];
+	u32 ch1_zqctl2;
+	u32 ch1_zqstat;
+	u32 res27[11];
+	u32 ch1_dfistat;
+	u32 res28[33];
+	u32 ch1_odtmap;
+	u32 res29[47];
+	u32 ch1_dbg1;
+	u32 ch1_dbgcam;
+	u32 ch1_dbgcmd;
+	u32 ch1_dbgstat;
+	u32 res30[123];
+	/* umctl2_regs_freq1 */
+	struct ddrc_freq freq1;
+	u32 res31[109];
+	/* umctl2_regs_addrmap_alt */
+	u32 addrmap0_alt;
+	u32 addrmap1_alt;
+	u32 addrmap2_alt;
+	u32 addrmap3_alt;
+	u32 addrmap4_alt;
+	u32 addrmap5_alt;
+	u32 addrmap6_alt;
+	u32 addrmap7_alt;
+	u32 addrmap8_alt;
+	u32 addrmap9_alt;
+	u32 addrmap10_alt;
+	u32 addrmap11_alt;
+	u32 res32[758];
+	/* umctl2_regs_freq2 */
+	struct ddrc_freq freq2;
+	u32 res33[879];
+	/* umctl2_regs_freq3 */
+	struct ddrc_freq freq3;
+};
+
+struct imx8m_ddrphy_regs {
+	u32 reg[0xf0000];
+};
+
+/* PHY State */
+enum pstate {
+	PS0,
+	PS1,
+	PS2,
+	PS3,
+};
+
+enum msg_response {
+	TRAIN_SUCCESS = 0x7,
+	TRAIN_STREAM_START = 0x8,
+	TRAIN_FAIL = 0xff,
+};
+
+#define DDRC_MSTR(X)             (DDRC_IPS_BASE_ADDR(X) + 0x00)
+#define DDRC_STAT(X)             (DDRC_IPS_BASE_ADDR(X) + 0x04)
+#define DDRC_MSTR1(X)            (DDRC_IPS_BASE_ADDR(X) + 0x08)
+#define DDRC_MRCTRL0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x10)
+#define DDRC_MRCTRL1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x14)
+#define DDRC_MRSTAT(X)           (DDRC_IPS_BASE_ADDR(X) + 0x18)
+#define DDRC_MRCTRL2(X)          (DDRC_IPS_BASE_ADDR(X) + 0x1c)
+#define DDRC_DERATEEN(X)         (DDRC_IPS_BASE_ADDR(X) + 0x20)
+#define DDRC_DERATEINT(X)        (DDRC_IPS_BASE_ADDR(X) + 0x24)
+#define DDRC_MSTR2(X)            (DDRC_IPS_BASE_ADDR(X) + 0x28)
+#define DDRC_PWRCTL(X)           (DDRC_IPS_BASE_ADDR(X) + 0x30)
+#define DDRC_PWRTMG(X)           (DDRC_IPS_BASE_ADDR(X) + 0x34)
+#define DDRC_HWLPCTL(X)          (DDRC_IPS_BASE_ADDR(X) + 0x38)
+#define DDRC_HWFFCCTL(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3c)
+#define DDRC_HWFFCSTAT(X)        (DDRC_IPS_BASE_ADDR(X) + 0x40)
+#define DDRC_RFSHCTL0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x50)
+#define DDRC_RFSHCTL1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x54)
+#define DDRC_RFSHCTL2(X)         (DDRC_IPS_BASE_ADDR(X) + 0x58)
+#define DDRC_RFSHCTL3(X)         (DDRC_IPS_BASE_ADDR(X) + 0x60)
+#define DDRC_RFSHTMG(X)          (DDRC_IPS_BASE_ADDR(X) + 0x64)
+#define DDRC_ECCCFG0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x70)
+#define DDRC_ECCCFG1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x74)
+#define DDRC_ECCSTAT(X)          (DDRC_IPS_BASE_ADDR(X) + 0x78)
+#define DDRC_ECCCLR(X)           (DDRC_IPS_BASE_ADDR(X) + 0x7c)
+#define DDRC_ECCERRCNT(X)        (DDRC_IPS_BASE_ADDR(X) + 0x80)
+#define DDRC_ECCCADDR0(X)        (DDRC_IPS_BASE_ADDR(X) + 0x84)
+#define DDRC_ECCCADDR1(X)        (DDRC_IPS_BASE_ADDR(X) + 0x88)
+#define DDRC_ECCCSYN0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x8c)
+#define DDRC_ECCCSYN1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x90)
+#define DDRC_ECCCSYN2(X)         (DDRC_IPS_BASE_ADDR(X) + 0x94)
+#define DDRC_ECCBITMASK0(X)      (DDRC_IPS_BASE_ADDR(X) + 0x98)
+#define DDRC_ECCBITMASK1(X)      (DDRC_IPS_BASE_ADDR(X) + 0x9c)
+#define DDRC_ECCBITMASK2(X)      (DDRC_IPS_BASE_ADDR(X) + 0xa0)
+#define DDRC_ECCUADDR0(X)        (DDRC_IPS_BASE_ADDR(X) + 0xa4)
+#define DDRC_ECCUADDR1(X)        (DDRC_IPS_BASE_ADDR(X) + 0xa8)
+#define DDRC_ECCUSYN0(X)         (DDRC_IPS_BASE_ADDR(X) + 0xac)
+#define DDRC_ECCUSYN1(X)         (DDRC_IPS_BASE_ADDR(X) + 0xb0)
+#define DDRC_ECCUSYN2(X)         (DDRC_IPS_BASE_ADDR(X) + 0xb4)
+#define DDRC_ECCPOISONADDR0(X)   (DDRC_IPS_BASE_ADDR(X) + 0xb8)
+#define DDRC_ECCPOISONADDR1(X)   (DDRC_IPS_BASE_ADDR(X) + 0xbc)
+#define DDRC_CRCPARCTL0(X)       (DDRC_IPS_BASE_ADDR(X) + 0xc0)
+#define DDRC_CRCPARCTL1(X)       (DDRC_IPS_BASE_ADDR(X) + 0xc4)
+#define DDRC_CRCPARCTL2(X)       (DDRC_IPS_BASE_ADDR(X) + 0xc8)
+#define DDRC_CRCPARSTAT(X)       (DDRC_IPS_BASE_ADDR(X) + 0xcc)
+#define DDRC_INIT0(X)            (DDRC_IPS_BASE_ADDR(X) + 0xd0)
+#define DDRC_INIT1(X)            (DDRC_IPS_BASE_ADDR(X) + 0xd4)
+#define DDRC_INIT2(X)            (DDRC_IPS_BASE_ADDR(X) + 0xd8)
+#define DDRC_INIT3(X)            (DDRC_IPS_BASE_ADDR(X) + 0xdc)
+#define DDRC_INIT4(X)            (DDRC_IPS_BASE_ADDR(X) + 0xe0)
+#define DDRC_INIT5(X)            (DDRC_IPS_BASE_ADDR(X) + 0xe4)
+#define DDRC_INIT6(X)            (DDRC_IPS_BASE_ADDR(X) + 0xe8)
+#define DDRC_INIT7(X)            (DDRC_IPS_BASE_ADDR(X) + 0xec)
+#define DDRC_DIMMCTL(X)          (DDRC_IPS_BASE_ADDR(X) + 0xf0)
+#define DDRC_RANKCTL(X)          (DDRC_IPS_BASE_ADDR(X) + 0xf4)
+#define DDRC_DRAMTMG0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x100)
+#define DDRC_DRAMTMG1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x104)
+#define DDRC_DRAMTMG2(X)         (DDRC_IPS_BASE_ADDR(X) + 0x108)
+#define DDRC_DRAMTMG3(X)         (DDRC_IPS_BASE_ADDR(X) + 0x10c)
+#define DDRC_DRAMTMG4(X)         (DDRC_IPS_BASE_ADDR(X) + 0x110)
+#define DDRC_DRAMTMG5(X)         (DDRC_IPS_BASE_ADDR(X) + 0x114)
+#define DDRC_DRAMTMG6(X)         (DDRC_IPS_BASE_ADDR(X) + 0x118)
+#define DDRC_DRAMTMG7(X)         (DDRC_IPS_BASE_ADDR(X) + 0x11c)
+#define DDRC_DRAMTMG8(X)         (DDRC_IPS_BASE_ADDR(X) + 0x120)
+#define DDRC_DRAMTMG9(X)         (DDRC_IPS_BASE_ADDR(X) + 0x124)
+#define DDRC_DRAMTMG10(X)        (DDRC_IPS_BASE_ADDR(X) + 0x128)
+#define DDRC_DRAMTMG11(X)        (DDRC_IPS_BASE_ADDR(X) + 0x12c)
+#define DDRC_DRAMTMG12(X)        (DDRC_IPS_BASE_ADDR(X) + 0x130)
+#define DDRC_DRAMTMG13(X)        (DDRC_IPS_BASE_ADDR(X) + 0x134)
+#define DDRC_DRAMTMG14(X)        (DDRC_IPS_BASE_ADDR(X) + 0x138)
+#define DDRC_DRAMTMG15(X)        (DDRC_IPS_BASE_ADDR(X) + 0x13C)
+#define DDRC_DRAMTMG16(X)        (DDRC_IPS_BASE_ADDR(X) + 0x140)
+#define DDRC_DRAMTMG17(X)        (DDRC_IPS_BASE_ADDR(X) + 0x144)
+#define DDRC_ZQCTL0(X)           (DDRC_IPS_BASE_ADDR(X) + 0x180)
+#define DDRC_ZQCTL1(X)           (DDRC_IPS_BASE_ADDR(X) + 0x184)
+#define DDRC_ZQCTL2(X)           (DDRC_IPS_BASE_ADDR(X) + 0x188)
+#define DDRC_ZQSTAT(X)           (DDRC_IPS_BASE_ADDR(X) + 0x18c)
+#define DDRC_DFITMG0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x190)
+#define DDRC_DFITMG1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x194)
+#define DDRC_DFILPCFG0(X)        (DDRC_IPS_BASE_ADDR(X) + 0x198)
+#define DDRC_DFILPCFG1(X)        (DDRC_IPS_BASE_ADDR(X) + 0x19c)
+#define DDRC_DFIUPD0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x1a0)
+#define DDRC_DFIUPD1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x1a4)
+#define DDRC_DFIUPD2(X)          (DDRC_IPS_BASE_ADDR(X) + 0x1a8)
+#define DDRC_DFIMISC(X)          (DDRC_IPS_BASE_ADDR(X) + 0x1b0)
+#define DDRC_DFITMG2(X)          (DDRC_IPS_BASE_ADDR(X) + 0x1b4)
+#define DDRC_DFITMG3(X)          (DDRC_IPS_BASE_ADDR(X) + 0x1b8)
+#define DDRC_DFISTAT(X)          (DDRC_IPS_BASE_ADDR(X) + 0x1bc)
+#define DDRC_DBICTL(X)           (DDRC_IPS_BASE_ADDR(X) + 0x1c0)
+#define DDRC_DFIPHYMSTR(X)       (DDRC_IPS_BASE_ADDR(X) + 0x1c4)
+#define DDRC_TRAINCTL0(X)        (DDRC_IPS_BASE_ADDR(X) + 0x1d0)
+#define DDRC_TRAINCTL1(X)        (DDRC_IPS_BASE_ADDR(X) + 0x1d4)
+#define DDRC_TRAINCTL2(X)        (DDRC_IPS_BASE_ADDR(X) + 0x1d8)
+#define DDRC_TRAINSTAT(X)        (DDRC_IPS_BASE_ADDR(X) + 0x1dc)
+#define DDRC_ADDRMAP0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x200)
+#define DDRC_ADDRMAP1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x204)
+#define DDRC_ADDRMAP2(X)         (DDRC_IPS_BASE_ADDR(X) + 0x208)
+#define DDRC_ADDRMAP3(X)         (DDRC_IPS_BASE_ADDR(X) + 0x20c)
+#define DDRC_ADDRMAP4(X)         (DDRC_IPS_BASE_ADDR(X) + 0x210)
+#define DDRC_ADDRMAP5(X)         (DDRC_IPS_BASE_ADDR(X) + 0x214)
+#define DDRC_ADDRMAP6(X)         (DDRC_IPS_BASE_ADDR(X) + 0x218)
+#define DDRC_ADDRMAP7(X)         (DDRC_IPS_BASE_ADDR(X) + 0x21c)
+#define DDRC_ADDRMAP8(X)         (DDRC_IPS_BASE_ADDR(X) + 0x220)
+#define DDRC_ADDRMAP9(X)         (DDRC_IPS_BASE_ADDR(X) + 0x224)
+#define DDRC_ADDRMAP10(X)        (DDRC_IPS_BASE_ADDR(X) + 0x228)
+#define DDRC_ADDRMAP11(X)        (DDRC_IPS_BASE_ADDR(X) + 0x22c)
+#define DDRC_ODTCFG(X)           (DDRC_IPS_BASE_ADDR(X) + 0x240)
+#define DDRC_ODTMAP(X)           (DDRC_IPS_BASE_ADDR(X) + 0x244)
+#define DDRC_SCHED(X)            (DDRC_IPS_BASE_ADDR(X) + 0x250)
+#define DDRC_SCHED1(X)           (DDRC_IPS_BASE_ADDR(X) + 0x254)
+#define DDRC_PERFHPR1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x25c)
+#define DDRC_PERFLPR1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x264)
+#define DDRC_PERFWR1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x26c)
+#define DDRC_PERFVPR1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x274)
+#define DDRC_PERFVPW1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x278)
+#define DDRC_DQMAP0(X)           (DDRC_IPS_BASE_ADDR(X) + 0x280)
+#define DDRC_DQMAP1(X)           (DDRC_IPS_BASE_ADDR(X) + 0x284)
+#define DDRC_DQMAP2(X)           (DDRC_IPS_BASE_ADDR(X) + 0x288)
+#define DDRC_DQMAP3(X)           (DDRC_IPS_BASE_ADDR(X) + 0x28c)
+#define DDRC_DQMAP4(X)           (DDRC_IPS_BASE_ADDR(X) + 0x290)
+#define DDRC_DQMAP5(X)           (DDRC_IPS_BASE_ADDR(X) + 0x294)
+#define DDRC_DBG0(X)             (DDRC_IPS_BASE_ADDR(X) + 0x300)
+#define DDRC_DBG1(X)             (DDRC_IPS_BASE_ADDR(X) + 0x304)
+#define DDRC_DBGCAM(X)           (DDRC_IPS_BASE_ADDR(X) + 0x308)
+#define DDRC_DBGCMD(X)           (DDRC_IPS_BASE_ADDR(X) + 0x30c)
+#define DDRC_DBGSTAT(X)          (DDRC_IPS_BASE_ADDR(X) + 0x310)
+#define DDRC_SWCTL(X)            (DDRC_IPS_BASE_ADDR(X) + 0x320)
+#define DDRC_SWSTAT(X)           (DDRC_IPS_BASE_ADDR(X) + 0x324)
+#define DDRC_OCPARCFG0(X)        (DDRC_IPS_BASE_ADDR(X) + 0x330)
+#define DDRC_OCPARCFG1(X)        (DDRC_IPS_BASE_ADDR(X) + 0x334)
+#define DDRC_OCPARCFG2(X)        (DDRC_IPS_BASE_ADDR(X) + 0x338)
+#define DDRC_OCPARCFG3(X)        (DDRC_IPS_BASE_ADDR(X) + 0x33c)
+#define DDRC_OCPARSTAT0(X)       (DDRC_IPS_BASE_ADDR(X) + 0x340)
+#define DDRC_OCPARSTAT1(X)       (DDRC_IPS_BASE_ADDR(X) + 0x344)
+#define DDRC_OCPARWLOG0(X)       (DDRC_IPS_BASE_ADDR(X) + 0x348)
+#define DDRC_OCPARWLOG1(X)       (DDRC_IPS_BASE_ADDR(X) + 0x34c)
+#define DDRC_OCPARWLOG2(X)       (DDRC_IPS_BASE_ADDR(X) + 0x350)
+#define DDRC_OCPARAWLOG0(X)      (DDRC_IPS_BASE_ADDR(X) + 0x354)
+#define DDRC_OCPARAWLOG1(X)      (DDRC_IPS_BASE_ADDR(X) + 0x358)
+#define DDRC_OCPARRLOG0(X)       (DDRC_IPS_BASE_ADDR(X) + 0x35c)
+#define DDRC_OCPARRLOG1(X)       (DDRC_IPS_BASE_ADDR(X) + 0x360)
+#define DDRC_OCPARARLOG0(X)      (DDRC_IPS_BASE_ADDR(X) + 0x364)
+#define DDRC_OCPARARLOG1(X)      (DDRC_IPS_BASE_ADDR(X) + 0x368)
+#define DDRC_POISONCFG(X)        (DDRC_IPS_BASE_ADDR(X) + 0x36C)
+#define DDRC_POISONSTAT(X)       (DDRC_IPS_BASE_ADDR(X) + 0x370)
+
+#define DDRC_PSTAT(X)            (DDRC_IPS_BASE_ADDR(X) + 0x3fc)
+#define DDRC_PCCFG(X)            (DDRC_IPS_BASE_ADDR(X) + 0x400)
+#define DDRC_PCFGR_0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x404)
+#define DDRC_PCFGR_1(X)          (DDRC_IPS_BASE_ADDR(X) + 1 * 0xb0 + 0x404)
+#define DDRC_PCFGR_2(X)          (DDRC_IPS_BASE_ADDR(X) + 2 * 0xb0 + 0x404)
+#define DDRC_PCFGR_3(X)          (DDRC_IPS_BASE_ADDR(X) + 3 * 0xb0 + 0x404)
+#define DDRC_PCFGW_0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x408)
+#define DDRC_PCFGW_1(X)          (DDRC_IPS_BASE_ADDR(X) + 1 * 0xb0 + 0x408)
+#define DDRC_PCFGW_2(X)          (DDRC_IPS_BASE_ADDR(X) + 2 * 0xb0 + 0x408)
+#define DDRC_PCFGW_3(X)          (DDRC_IPS_BASE_ADDR(X) + 3 * 0xb0 + 0x408)
+#define DDRC_PCFGC_0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x40c)
+#define DDRC_PCFGIDMASKCH(X)     (DDRC_IPS_BASE_ADDR(X) + 0x410)
+#define DDRC_PCFGIDVALUECH(X)    (DDRC_IPS_BASE_ADDR(X) + 0x414)
+#define DDRC_PCTRL_0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x490)
+#define DDRC_PCTRL_1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x490 + 1 * 0xb0)
+#define DDRC_PCTRL_2(X)          (DDRC_IPS_BASE_ADDR(X) + 0x490 + 2 * 0xb0)
+#define DDRC_PCTRL_3(X)          (DDRC_IPS_BASE_ADDR(X) + 0x490 + 3 * 0xb0)
+#define DDRC_PCFGQOS0_0(X)       (DDRC_IPS_BASE_ADDR(X) + 0x494)
+#define DDRC_PCFGQOS1_0(X)       (DDRC_IPS_BASE_ADDR(X) + 0x498)
+#define DDRC_PCFGWQOS0_0(X)      (DDRC_IPS_BASE_ADDR(X) + 0x49c)
+#define DDRC_PCFGWQOS1_0(X)      (DDRC_IPS_BASE_ADDR(X) + 0x4a0)
+#define DDRC_SARBASE0(X)         (DDRC_IPS_BASE_ADDR(X) + 0xf04)
+#define DDRC_SARSIZE0(X)         (DDRC_IPS_BASE_ADDR(X) + 0xf08)
+#define DDRC_SBRCTL(X)           (DDRC_IPS_BASE_ADDR(X) + 0xf24)
+#define DDRC_SBRSTAT(X)          (DDRC_IPS_BASE_ADDR(X) + 0xf28)
+#define DDRC_SBRWDATA0(X)        (DDRC_IPS_BASE_ADDR(X) + 0xf2c)
+#define DDRC_SBRWDATA1(X)        (DDRC_IPS_BASE_ADDR(X) + 0xf30)
+#define DDRC_PDCH(X)             (DDRC_IPS_BASE_ADDR(X) + 0xf34)
+#define DDRC_SBRSTART0(X)        (DDRC_IPS_BASE_ADDR(X) + 0xf38)
+#define DDRC_SBRRANGE0(X)        (DDRC_IPS_BASE_ADDR(X) + 0xf40)
+
+#define DDRC_FREQ1_DERATEEN(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2020)
+#define DDRC_FREQ1_DERATEINT(X)        (DDRC_IPS_BASE_ADDR(X) + 0x2024)
+#define DDRC_FREQ1_RFSHCTL0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2050)
+#define DDRC_FREQ1_RFSHTMG(X)          (DDRC_IPS_BASE_ADDR(X) + 0x2064)
+#define DDRC_FREQ1_INIT3(X)            (DDRC_IPS_BASE_ADDR(X) + 0x20dc)
+#define DDRC_FREQ1_INIT4(X)            (DDRC_IPS_BASE_ADDR(X) + 0x20e0)
+#define DDRC_FREQ1_INIT6(X)            (DDRC_IPS_BASE_ADDR(X) + 0x20e8)
+#define DDRC_FREQ1_INIT7(X)            (DDRC_IPS_BASE_ADDR(X) + 0x20ec)
+#define DDRC_FREQ1_DRAMTMG0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2100)
+#define DDRC_FREQ1_DRAMTMG1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2104)
+#define DDRC_FREQ1_DRAMTMG2(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2108)
+#define DDRC_FREQ1_DRAMTMG3(X)         (DDRC_IPS_BASE_ADDR(X) + 0x210c)
+#define DDRC_FREQ1_DRAMTMG4(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2110)
+#define DDRC_FREQ1_DRAMTMG5(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2114)
+#define DDRC_FREQ1_DRAMTMG6(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2118)
+#define DDRC_FREQ1_DRAMTMG7(X)         (DDRC_IPS_BASE_ADDR(X) + 0x211c)
+#define DDRC_FREQ1_DRAMTMG8(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2120)
+#define DDRC_FREQ1_DRAMTMG9(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2124)
+#define DDRC_FREQ1_DRAMTMG10(X)        (DDRC_IPS_BASE_ADDR(X) + 0x2128)
+#define DDRC_FREQ1_DRAMTMG11(X)        (DDRC_IPS_BASE_ADDR(X) + 0x212c)
+#define DDRC_FREQ1_DRAMTMG12(X)        (DDRC_IPS_BASE_ADDR(X) + 0x2130)
+#define DDRC_FREQ1_DRAMTMG13(X)        (DDRC_IPS_BASE_ADDR(X) + 0x2134)
+#define DDRC_FREQ1_DRAMTMG14(X)        (DDRC_IPS_BASE_ADDR(X) + 0x2138)
+#define DDRC_FREQ1_DRAMTMG15(X)        (DDRC_IPS_BASE_ADDR(X) + 0x213C)
+#define DDRC_FREQ1_DRAMTMG16(X)        (DDRC_IPS_BASE_ADDR(X) + 0x2140)
+#define DDRC_FREQ1_DRAMTMG17(X)        (DDRC_IPS_BASE_ADDR(X) + 0x2144)
+#define DDRC_FREQ1_ZQCTL0(X)           (DDRC_IPS_BASE_ADDR(X) + 0x2180)
+#define DDRC_FREQ1_DFITMG0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x2190)
+#define DDRC_FREQ1_DFITMG1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x2194)
+#define DDRC_FREQ1_DFITMG2(X)          (DDRC_IPS_BASE_ADDR(X) + 0x21b4)
+#define DDRC_FREQ1_DFITMG3(X)          (DDRC_IPS_BASE_ADDR(X) + 0x21b8)
+#define DDRC_FREQ1_ODTCFG(X)           (DDRC_IPS_BASE_ADDR(X) + 0x2240)
+
+#define DDRC_FREQ2_DERATEEN(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3020)
+#define DDRC_FREQ2_DERATEINT(X)        (DDRC_IPS_BASE_ADDR(X) + 0x3024)
+#define DDRC_FREQ2_RFSHCTL0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3050)
+#define DDRC_FREQ2_RFSHTMG(X)          (DDRC_IPS_BASE_ADDR(X) + 0x3064)
+#define DDRC_FREQ2_INIT3(X)            (DDRC_IPS_BASE_ADDR(X) + 0x30dc)
+#define DDRC_FREQ2_INIT4(X)            (DDRC_IPS_BASE_ADDR(X) + 0x30e0)
+#define DDRC_FREQ2_INIT6(X)            (DDRC_IPS_BASE_ADDR(X) + 0x30e8)
+#define DDRC_FREQ2_INIT7(X)            (DDRC_IPS_BASE_ADDR(X) + 0x30ec)
+#define DDRC_FREQ2_DRAMTMG0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3100)
+#define DDRC_FREQ2_DRAMTMG1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3104)
+#define DDRC_FREQ2_DRAMTMG2(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3108)
+#define DDRC_FREQ2_DRAMTMG3(X)         (DDRC_IPS_BASE_ADDR(X) + 0x310c)
+#define DDRC_FREQ2_DRAMTMG4(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3110)
+#define DDRC_FREQ2_DRAMTMG5(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3114)
+#define DDRC_FREQ2_DRAMTMG6(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3118)
+#define DDRC_FREQ2_DRAMTMG7(X)         (DDRC_IPS_BASE_ADDR(X) + 0x311c)
+#define DDRC_FREQ2_DRAMTMG8(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3120)
+#define DDRC_FREQ2_DRAMTMG9(X)         (DDRC_IPS_BASE_ADDR(X) + 0x3124)
+#define DDRC_FREQ2_DRAMTMG10(X)        (DDRC_IPS_BASE_ADDR(X) + 0x3128)
+#define DDRC_FREQ2_DRAMTMG11(X)        (DDRC_IPS_BASE_ADDR(X) + 0x312c)
+#define DDRC_FREQ2_DRAMTMG12(X)        (DDRC_IPS_BASE_ADDR(X) + 0x3130)
+#define DDRC_FREQ2_DRAMTMG13(X)        (DDRC_IPS_BASE_ADDR(X) + 0x3134)
+#define DDRC_FREQ2_DRAMTMG14(X)        (DDRC_IPS_BASE_ADDR(X) + 0x3138)
+#define DDRC_FREQ2_DRAMTMG15(X)        (DDRC_IPS_BASE_ADDR(X) + 0x313C)
+#define DDRC_FREQ2_DRAMTMG16(X)        (DDRC_IPS_BASE_ADDR(X) + 0x3140)
+#define DDRC_FREQ2_DRAMTMG17(X)        (DDRC_IPS_BASE_ADDR(X) + 0x3144)
+#define DDRC_FREQ2_ZQCTL0(X)           (DDRC_IPS_BASE_ADDR(X) + 0x3180)
+#define DDRC_FREQ2_DFITMG0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x3190)
+#define DDRC_FREQ2_DFITMG1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x3194)
+#define DDRC_FREQ2_DFITMG2(X)          (DDRC_IPS_BASE_ADDR(X) + 0x31b4)
+#define DDRC_FREQ2_DFITMG3(X)          (DDRC_IPS_BASE_ADDR(X) + 0x31b8)
+#define DDRC_FREQ2_ODTCFG(X)           (DDRC_IPS_BASE_ADDR(X) + 0x3240)
+
+#define DDRC_FREQ3_DERATEEN(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4020)
+#define DDRC_FREQ3_DERATEINT(X)        (DDRC_IPS_BASE_ADDR(X) + 0x4024)
+#define DDRC_FREQ3_RFSHCTL0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4050)
+#define DDRC_FREQ3_RFSHTMG(X)          (DDRC_IPS_BASE_ADDR(X) + 0x4064)
+#define DDRC_FREQ3_INIT3(X)            (DDRC_IPS_BASE_ADDR(X) + 0x40dc)
+#define DDRC_FREQ3_INIT4(X)            (DDRC_IPS_BASE_ADDR(X) + 0x40e0)
+#define DDRC_FREQ3_INIT6(X)            (DDRC_IPS_BASE_ADDR(X) + 0x40e8)
+#define DDRC_FREQ3_INIT7(X)            (DDRC_IPS_BASE_ADDR(X) + 0x40ec)
+#define DDRC_FREQ3_DRAMTMG0(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4100)
+#define DDRC_FREQ3_DRAMTMG1(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4104)
+#define DDRC_FREQ3_DRAMTMG2(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4108)
+#define DDRC_FREQ3_DRAMTMG3(X)         (DDRC_IPS_BASE_ADDR(X) + 0x410c)
+#define DDRC_FREQ3_DRAMTMG4(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4110)
+#define DDRC_FREQ3_DRAMTMG5(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4114)
+#define DDRC_FREQ3_DRAMTMG6(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4118)
+#define DDRC_FREQ3_DRAMTMG7(X)         (DDRC_IPS_BASE_ADDR(X) + 0x411c)
+#define DDRC_FREQ3_DRAMTMG8(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4120)
+#define DDRC_FREQ3_DRAMTMG9(X)         (DDRC_IPS_BASE_ADDR(X) + 0x4124)
+#define DDRC_FREQ3_DRAMTMG10(X)        (DDRC_IPS_BASE_ADDR(X) + 0x4128)
+#define DDRC_FREQ3_DRAMTMG11(X)        (DDRC_IPS_BASE_ADDR(X) + 0x412c)
+#define DDRC_FREQ3_DRAMTMG12(X)        (DDRC_IPS_BASE_ADDR(X) + 0x4130)
+#define DDRC_FREQ3_DRAMTMG13(X)        (DDRC_IPS_BASE_ADDR(X) + 0x4134)
+#define DDRC_FREQ3_DRAMTMG14(X)        (DDRC_IPS_BASE_ADDR(X) + 0x4138)
+#define DDRC_FREQ3_DRAMTMG15(X)        (DDRC_IPS_BASE_ADDR(X) + 0x413C)
+#define DDRC_FREQ3_DRAMTMG16(X)        (DDRC_IPS_BASE_ADDR(X) + 0x4140)
+
+#define DDRC_FREQ3_ZQCTL0(X)           (DDRC_IPS_BASE_ADDR(X) + 0x4180)
+#define DDRC_FREQ3_DFITMG0(X)          (DDRC_IPS_BASE_ADDR(X) + 0x4190)
+#define DDRC_FREQ3_DFITMG1(X)          (DDRC_IPS_BASE_ADDR(X) + 0x4194)
+#define DDRC_FREQ3_DFITMG2(X)          (DDRC_IPS_BASE_ADDR(X) + 0x41b4)
+#define DDRC_FREQ3_DFITMG3(X)          (DDRC_IPS_BASE_ADDR(X) + 0x41b8)
+#define DDRC_FREQ3_ODTCFG(X)           (DDRC_IPS_BASE_ADDR(X) + 0x4240)
+#define DDRC_DFITMG0_SHADOW(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2190)
+#define DDRC_DFITMG1_SHADOW(X)         (DDRC_IPS_BASE_ADDR(X) + 0x2194)
+#define DDRC_DFITMG2_SHADOW(X)         (DDRC_IPS_BASE_ADDR(X) + 0x21b4)
+#define DDRC_DFITMG3_SHADOW(X)         (DDRC_IPS_BASE_ADDR(X) + 0x21b8)
+#define DDRC_ODTCFG_SHADOW(X)          (DDRC_IPS_BASE_ADDR(X) + 0x2240)
+
+#define DDRPHY_CalBusy(X) (IP2APB_DDRPHY_IPS_BASE_ADDR(X) + 4 * 0x020097)
+
+#define DRC_PERF_MON_BASE_ADDR(X)            (0x3d800000 + ((X) * 0x2000000))
+#define DRC_PERF_MON_CNT0_CTL(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x0)
+#define DRC_PERF_MON_CNT1_CTL(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x4)
+#define DRC_PERF_MON_CNT2_CTL(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x8)
+#define DRC_PERF_MON_CNT3_CTL(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0xC)
+#define DRC_PERF_MON_CNT0_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x20)
+#define DRC_PERF_MON_CNT1_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x24)
+#define DRC_PERF_MON_CNT2_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x28)
+#define DRC_PERF_MON_CNT3_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x2C)
+#define DRC_PERF_MON_MRR0_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x40)
+#define DRC_PERF_MON_MRR1_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x44)
+#define DRC_PERF_MON_MRR2_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x48)
+#define DRC_PERF_MON_MRR3_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x4C)
+#define DRC_PERF_MON_MRR4_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x50)
+#define DRC_PERF_MON_MRR5_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x54)
+#define DRC_PERF_MON_MRR6_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x58)
+#define DRC_PERF_MON_MRR7_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x5C)
+#define DRC_PERF_MON_MRR8_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x60)
+#define DRC_PERF_MON_MRR9_DAT(X)             (DRC_PERF_MON_BASE_ADDR(X) + 0x64)
+#define DRC_PERF_MON_MRR10_DAT(X)            (DRC_PERF_MON_BASE_ADDR(X) + 0x68)
+#define DRC_PERF_MON_MRR11_DAT(X)            (DRC_PERF_MON_BASE_ADDR(X) + 0x6C)
+#define DRC_PERF_MON_MRR12_DAT(X)            (DRC_PERF_MON_BASE_ADDR(X) + 0x70)
+#define DRC_PERF_MON_MRR13_DAT(X)            (DRC_PERF_MON_BASE_ADDR(X) + 0x74)
+#define DRC_PERF_MON_MRR14_DAT(X)            (DRC_PERF_MON_BASE_ADDR(X) + 0x78)
+#define DRC_PERF_MON_MRR15_DAT(X)            (DRC_PERF_MON_BASE_ADDR(X) + 0x7C)
+
+/* user data type */
+enum fw_type {
+	FW_1D_IMAGE,
+	FW_2D_IMAGE,
+};
+
+struct dram_cfg_param {
+	unsigned int reg;
+	unsigned int val;
+};
+
+struct dram_fsp_msg {
+	unsigned int drate;
+	enum fw_type fw_type;
+	struct dram_cfg_param *fsp_cfg;
+	unsigned int fsp_cfg_num;
+};
+
+struct dram_timing_info {
+	/* umctl2 config */
+	struct dram_cfg_param *ddrc_cfg;
+	unsigned int ddrc_cfg_num;
+	/* ddrphy config */
+	struct dram_cfg_param *ddrphy_cfg;
+	unsigned int ddrphy_cfg_num;
+	/* ddr fsp train info */
+	struct dram_fsp_msg *fsp_msg;
+	unsigned int fsp_msg_num;
+	/* ddr phy trained CSR */
+	struct dram_cfg_param *ddrphy_trained_csr;
+	unsigned int ddrphy_trained_csr_num;
+	/* ddr phy PIE */
+	struct dram_cfg_param *ddrphy_pie;
+	unsigned int ddrphy_pie_num;
+	/* initialized drate table */
+	unsigned int fsp_table[4];
+};
+
+extern struct dram_timing_info dram_timing;
+
+void ddr_load_train_firmware(enum fw_type type);
+int ddr_init(struct dram_timing_info *timing_info);
+int ddr_cfg_phy(struct dram_timing_info *timing_info);
+void load_lpddr4_phy_pie(void);
+void ddrphy_trained_csr_save(struct dram_cfg_param *param, unsigned int num);
+void dram_config_save(struct dram_timing_info *info, unsigned long base);
+void board_dram_ecc_scrub(void);
+void ddrc_inline_ecc_scrub(unsigned int start_address,
+			   unsigned int range_address);
+void ddrc_inline_ecc_scrub_end(unsigned int start_address,
+			       unsigned int range_address);
+
+/* utils function for ddr phy training */
+int wait_ddrphy_training_complete(void);
+void ddrphy_init_set_dfi_clk(unsigned int drate);
+void ddrphy_init_read_msg_block(enum fw_type type);
+
+void update_umctl2_rank_space_setting(unsigned int pstat_num);
+void get_trained_CDD(unsigned int fsp);
+
+static inline void reg32_write(unsigned long addr, u32 val)
+{
+	writel(val, addr);
+}
+
+static inline u32 reg32_read(unsigned long addr)
+{
+	return readl(addr);
+}
+
+static inline void reg32setbit(unsigned long addr, u32 bit)
+{
+	setbits_le32(addr, (1 << bit));
+}
+
+#define dwc_ddrphy_apb_wr(addr, data) \
+	reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * (addr), data)
+#define dwc_ddrphy_apb_rd(addr) \
+	reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * (addr))
+
+extern struct dram_cfg_param ddrphy_trained_csr[];
+extern uint32_t ddrphy_trained_csr_num;
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/gpio.h
new file mode 100644
index 000000000..2d9fbcb0e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8M_GPIO_H
+#define __ASM_ARCH_IMX8M_GPIO_H
+
+#include <asm/mach-imx/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx-regs.h
new file mode 100644
index 000000000..b800da13a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx-regs.h
@@ -0,0 +1,517 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8M_REGS_H__
+#define __ASM_ARCH_IMX8M_REGS_H__
+
+#define ARCH_MXC
+
+#include <asm/mach-imx/regs-lcdif.h>
+
+#define ROM_VERSION_A0		IS_ENABLED(CONFIG_IMX8MQ) ? 0x800 : 0x800
+#define ROM_VERSION_B0		IS_ENABLED(CONFIG_IMX8MQ) ? 0x83C : 0x800
+
+#define M4_BOOTROM_BASE_ADDR   0x007E0000
+
+#define GPIO1_BASE_ADDR		0X30200000
+#define GPIO2_BASE_ADDR		0x30210000
+#define GPIO3_BASE_ADDR		0x30220000
+#define GPIO4_BASE_ADDR		0x30230000
+#define GPIO5_BASE_ADDR		0x30240000
+#define WDOG1_BASE_ADDR		0x30280000
+#define WDOG2_BASE_ADDR		0x30290000
+#define WDOG3_BASE_ADDR		0x302A0000
+#define IOMUXC_BASE_ADDR	0x30330000
+#define IOMUXC_GPR_BASE_ADDR	0x30340000
+#define OCOTP_BASE_ADDR		0x30350000
+#define ANATOP_BASE_ADDR	0x30360000
+#define CCM_BASE_ADDR		0x30380000
+#define SRC_BASE_ADDR		0x30390000
+#define GPC_BASE_ADDR		0x303A0000
+
+#define SYSCNT_RD_BASE_ADDR	0x306A0000
+#define SYSCNT_CMP_BASE_ADDR	0x306B0000
+#define SYSCNT_CTRL_BASE_ADDR	0x306C0000
+
+#define UART1_BASE_ADDR		0x30860000
+#define UART3_BASE_ADDR		0x30880000
+#define UART2_BASE_ADDR		0x30890000
+#define I2C1_BASE_ADDR		0x30A20000
+#define I2C2_BASE_ADDR		0x30A30000
+#define I2C3_BASE_ADDR		0x30A40000
+#define I2C4_BASE_ADDR		0x30A50000
+#define UART4_BASE_ADDR		0x30A60000
+#define USDHC1_BASE_ADDR	0x30B40000
+#define USDHC2_BASE_ADDR	0x30B50000
+#ifdef CONFIG_IMX8MM
+#define USDHC3_BASE_ADDR	0x30B60000
+#endif
+
+#define TZASC_BASE_ADDR		0x32F80000
+
+#define MXS_LCDIF_BASE		IS_ENABLED(CONFIG_IMX8MQ) ? \
+					0x30320000 : 0x32e00000
+
+#define SRC_IPS_BASE_ADDR	0x30390000
+#define SRC_DDRC_RCR_ADDR	0x30391000
+#define SRC_DDRC2_RCR_ADDR	0x30391004
+
+#define DDRC_DDR_SS_GPR0	0x3d000000
+#define DDRC_IPS_BASE_ADDR(X)	(0x3d400000 + ((X) * 0x2000000))
+#define DDR_CSD1_BASE_ADDR	0x40000000
+
+#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK 0x70000
+#define FEC_QUIRK_ENET_MAC
+
+#define CAAM_ARB_BASE_ADDR              (0x00100000)
+#define CAAM_ARB_END_ADDR               (0x00107FFF)
+#define CAAM_IPS_BASE_ADDR              (0x30900000)
+#define CONFIG_SYS_FSL_SEC_OFFSET       (0)
+#define CONFIG_SYS_FSL_SEC_ADDR         (CAAM_IPS_BASE_ADDR + \
+					 CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_OFFSET       (0x1000)
+#define CONFIG_SYS_FSL_JR0_ADDR         (CONFIG_SYS_FSL_SEC_ADDR + \
+					 CONFIG_SYS_FSL_JR0_OFFSET)
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC   1
+#if !defined(__ASSEMBLY__)
+#include <asm/types.h>
+#include <linux/bitops.h>
+#include <stdbool.h>
+
+#define GPR_TZASC_EN		BIT(0)
+#define GPR_TZASC_EN_LOCK	BIT(16)
+
+#define SRC_SCR_M4_ENABLE_OFFSET	3
+#define SRC_SCR_M4_ENABLE_MASK		BIT(3)
+#define SRC_SCR_M4C_NON_SCLR_RST_OFFSET	0
+#define SRC_SCR_M4C_NON_SCLR_RST_MASK	BIT(0)
+#define SRC_DDR1_ENABLE_MASK		0x8F000000UL
+#define SRC_DDR2_ENABLE_MASK		0x8F000000UL
+#define SRC_DDR1_RCR_PHY_PWROKIN_N_MASK	BIT(3)
+#define SRC_DDR1_RCR_PHY_RESET_MASK	BIT(2)
+#define SRC_DDR1_RCR_CORE_RESET_N_MASK	BIT(1)
+#define SRC_DDR1_RCR_PRESET_N_MASK	BIT(0)
+
+struct iomuxc_gpr_base_regs {
+	u32 gpr[47];
+};
+
+struct ocotp_regs {
+	u32	ctrl;
+	u32	ctrl_set;
+	u32     ctrl_clr;
+	u32	ctrl_tog;
+	u32	timing;
+	u32     rsvd0[3];
+	u32     data;
+	u32     rsvd1[3];
+	u32     read_ctrl;
+	u32     rsvd2[3];
+	u32	read_fuse_data;
+	u32     rsvd3[3];
+	u32	sw_sticky;
+	u32     rsvd4[3];
+	u32     scs;
+	u32     scs_set;
+	u32     scs_clr;
+	u32     scs_tog;
+	u32     crc_addr;
+	u32     rsvd5[3];
+	u32     crc_value;
+	u32     rsvd6[3];
+	u32     version;
+	u32     rsvd7[0xdb];
+
+	/* fuse banks */
+	struct fuse_bank {
+		u32	fuse_regs[0x10];
+	} bank[0];
+};
+
+#ifdef CONFIG_IMX8MP
+struct fuse_bank0_regs {
+	u32 lock;
+	u32 rsvd0[7];
+	u32 uid_low;
+	u32 rsvd1[3];
+	u32 uid_high;
+	u32 rsvd2[3];
+};
+#else
+struct fuse_bank0_regs {
+	u32 lock;
+	u32 rsvd0[3];
+	u32 uid_low;
+	u32 rsvd1[3];
+	u32 uid_high;
+	u32 rsvd2[7];
+};
+#endif
+
+struct fuse_bank1_regs {
+	u32 tester3;
+	u32 rsvd0[3];
+	u32 tester4;
+	u32 rsvd1[3];
+	u32 tester5;
+	u32 rsvd2[3];
+	u32 cfg0;
+	u32 rsvd3[3];
+};
+
+struct fuse_bank3_regs {
+	u32 mem_trim0;
+	u32 rsvd0[3];
+	u32 mem_trim1;
+	u32 rsvd1[3];
+	u32 mem_trim2;
+	u32 rsvd2[3];
+	u32 ana0;
+	u32 rsvd3[3];
+};
+
+struct fuse_bank9_regs {
+	u32 mac_addr0;
+	u32 rsvd0[3];
+	u32 mac_addr1;
+	u32 rsvd1[11];
+};
+
+struct fuse_bank38_regs {
+	u32 ana_trim1; /* trim0 is at 0xD70, bank 37*/
+	u32 rsvd0[3];
+	u32 ana_trim2;
+	u32 rsvd1[3];
+	u32 ana_trim3;
+	u32 rsvd2[3];
+	u32 ana_trim4;
+	u32 rsvd3[3];
+};
+
+struct fuse_bank39_regs {
+	u32 ana_trim5;
+	u32 rsvd[15];
+};
+
+#ifdef CONFIG_IMX8MQ
+struct anamix_pll {
+	u32 audio_pll1_cfg0;
+	u32 audio_pll1_cfg1;
+	u32 audio_pll2_cfg0;
+	u32 audio_pll2_cfg1;
+	u32 video_pll_cfg0;
+	u32 video_pll_cfg1;
+	u32 gpu_pll_cfg0;
+	u32 gpu_pll_cfg1;
+	u32 vpu_pll_cfg0;
+	u32 vpu_pll_cfg1;
+	u32 arm_pll_cfg0;
+	u32 arm_pll_cfg1;
+	u32 sys_pll1_cfg0;
+	u32 sys_pll1_cfg1;
+	u32 sys_pll1_cfg2;
+	u32 sys_pll2_cfg0;
+	u32 sys_pll2_cfg1;
+	u32 sys_pll2_cfg2;
+	u32 sys_pll3_cfg0;
+	u32 sys_pll3_cfg1;
+	u32 sys_pll3_cfg2;
+	u32 video_pll2_cfg0;
+	u32 video_pll2_cfg1;
+	u32 video_pll2_cfg2;
+	u32 dram_pll_cfg0;
+	u32 dram_pll_cfg1;
+	u32 dram_pll_cfg2;
+	u32 digprog;
+	u32 osc_misc_cfg;
+	u32 pllout_monitor_cfg;
+	u32 frac_pllout_div_cfg;
+	u32 sscg_pllout_div_cfg;
+};
+#else
+struct anamix_pll {
+	u32 audio_pll1_gnrl_ctl;
+	u32 audio_pll1_fdiv_ctl0;
+	u32 audio_pll1_fdiv_ctl1;
+	u32 audio_pll1_sscg_ctl;
+	u32 audio_pll1_mnit_ctl;
+	u32 audio_pll2_gnrl_ctl;
+	u32 audio_pll2_fdiv_ctl0;
+	u32 audio_pll2_fdiv_ctl1;
+	u32 audio_pll2_sscg_ctl;
+	u32 audio_pll2_mnit_ctl;
+	u32 video_pll1_gnrl_ctl;
+	u32 video_pll1_fdiv_ctl0;
+	u32 video_pll1_fdiv_ctl1;
+	u32 video_pll1_sscg_ctl;
+	u32 video_pll1_mnit_ctl;
+	u32 reserved[5];
+	u32 dram_pll_gnrl_ctl;
+	u32 dram_pll_fdiv_ctl0;
+	u32 dram_pll_fdiv_ctl1;
+	u32 dram_pll_sscg_ctl;
+	u32 dram_pll_mnit_ctl;
+	u32 gpu_pll_gnrl_ctl;
+	u32 gpu_pll_div_ctl;
+	u32 gpu_pll_locked_ctl1;
+	u32 gpu_pll_mnit_ctl;
+	u32 vpu_pll_gnrl_ctl;
+	u32 vpu_pll_div_ctl;
+	u32 vpu_pll_locked_ctl1;
+	u32 vpu_pll_mnit_ctl;
+	u32 arm_pll_gnrl_ctl;
+	u32 arm_pll_div_ctl;
+	u32 arm_pll_locked_ctl1;
+	u32 arm_pll_mnit_ctl;
+	u32 sys_pll1_gnrl_ctl;
+	u32 sys_pll1_div_ctl;
+	u32 sys_pll1_locked_ctl1;
+	u32 reserved2[24];
+	u32 sys_pll1_mnit_ctl;
+	u32 sys_pll2_gnrl_ctl;
+	u32 sys_pll2_div_ctl;
+	u32 sys_pll2_locked_ctl1;
+	u32 sys_pll2_mnit_ctl;
+	u32 sys_pll3_gnrl_ctl;
+	u32 sys_pll3_div_ctl;
+	u32 sys_pll3_locked_ctl1;
+	u32 sys_pll3_mnit_ctl;
+	u32 anamix_misc_ctl;
+	u32 anamix_clk_mnit_ctl;
+	u32 reserved3[437];
+	u32 digprog;
+};
+#endif
+
+/* System Reset Controller (SRC) */
+struct src {
+	u32 scr;
+	u32 a53rcr;
+	u32 a53rcr1;
+	u32 m4rcr;
+	u32 reserved1[4];
+	u32 usbophy1_rcr;
+	u32 usbophy2_rcr;
+	u32 mipiphy_rcr;
+	u32 pciephy_rcr;
+	u32 hdmi_rcr;
+	u32 disp_rcr;
+	u32 reserved2[2];
+	u32 gpu_rcr;
+	u32 vpu_rcr;
+	u32 pcie2_rcr;
+	u32 mipiphy1_rcr;
+	u32 mipiphy2_rcr;
+	u32 reserved3;
+	u32 sbmr1;
+	u32 srsr;
+	u32 reserved4[2];
+	u32 sisr;
+	u32 simr;
+	u32 sbmr2;
+	u32 gpr1;
+	u32 gpr2;
+	u32 gpr3;
+	u32 gpr4;
+	u32 gpr5;
+	u32 gpr6;
+	u32 gpr7;
+	u32 gpr8;
+	u32 gpr9;
+	u32 gpr10;
+	u32 reserved5[985];
+	u32 ddr1_rcr;
+	u32 ddr2_rcr;
+};
+
+#define WDOG_WDT_MASK	BIT(3)
+#define WDOG_WDZST_MASK	BIT(0)
+struct wdog_regs {
+	u16	wcr;	/* Control */
+	u16	wsr;	/* Service */
+	u16	wrsr;	/* Reset Status */
+	u16	wicr;	/* Interrupt Control */
+	u16	wmcr;	/* Miscellaneous Control */
+};
+
+struct bootrom_sw_info {
+	u8 reserved_1;
+	u8 boot_dev_instance;
+	u8 boot_dev_type;
+	u8 reserved_2;
+	u32 core_freq;
+	u32 axi_freq;
+	u32 ddr_freq;
+	u32 tick_freq;
+	u32 reserved_3[3];
+};
+
+#define ROM_SW_INFO_ADDR_B0	(IS_ENABLED(CONFIG_IMX8MQ) ? 0x00000968 :\
+				 0x000009e8)
+#define ROM_SW_INFO_ADDR_A0	0x000009e8
+
+#define ROM_SW_INFO_ADDR is_soc_rev(CHIP_REV_1_0) ? \
+		(struct bootrom_sw_info **)ROM_SW_INFO_ADDR_A0 : \
+		(struct bootrom_sw_info **)ROM_SW_INFO_ADDR_B0
+
+struct gpc_reg {
+	u32 lpcr_bsc;
+	u32 lpcr_ad;
+	u32 lpcr_cpu1;
+	u32 lpcr_cpu2;
+	u32 lpcr_cpu3;
+	u32 slpcr;
+	u32 mst_cpu_mapping;
+	u32 mmdc_cpu_mapping;
+	u32 mlpcr;
+	u32 pgc_ack_sel;
+	u32 pgc_ack_sel_m4;
+	u32 gpc_misc;
+	u32 imr1_core0;
+	u32 imr2_core0;
+	u32 imr3_core0;
+	u32 imr4_core0;
+	u32 imr1_core1;
+	u32 imr2_core1;
+	u32 imr3_core1;
+	u32 imr4_core1;
+	u32 imr1_cpu1;
+	u32 imr2_cpu1;
+	u32 imr3_cpu1;
+	u32 imr4_cpu1;
+	u32 imr1_cpu3;
+	u32 imr2_cpu3;
+	u32 imr3_cpu3;
+	u32 imr4_cpu3;
+	u32 isr1_cpu0;
+	u32 isr2_cpu0;
+	u32 isr3_cpu0;
+	u32 isr4_cpu0;
+	u32 isr1_cpu1;
+	u32 isr2_cpu1;
+	u32 isr3_cpu1;
+	u32 isr4_cpu1;
+	u32 isr1_cpu2;
+	u32 isr2_cpu2;
+	u32 isr3_cpu2;
+	u32 isr4_cpu2;
+	u32 isr1_cpu3;
+	u32 isr2_cpu3;
+	u32 isr3_cpu3;
+	u32 isr4_cpu3;
+	u32 slt0_cfg;
+	u32 slt1_cfg;
+	u32 slt2_cfg;
+	u32 slt3_cfg;
+	u32 slt4_cfg;
+	u32 slt5_cfg;
+	u32 slt6_cfg;
+	u32 slt7_cfg;
+	u32 slt8_cfg;
+	u32 slt9_cfg;
+	u32 slt10_cfg;
+	u32 slt11_cfg;
+	u32 slt12_cfg;
+	u32 slt13_cfg;
+	u32 slt14_cfg;
+	u32 pgc_cpu_0_1_mapping;
+	u32 cpu_pgc_up_trg;
+	u32 mix_pgc_up_trg;
+	u32 pu_pgc_up_trg;
+	u32 cpu_pgc_dn_trg;
+	u32 mix_pgc_dn_trg;
+	u32 pu_pgc_dn_trg;
+	u32 lpcr_bsc2;
+	u32 pgc_cpu_2_3_mapping;
+	u32 lps_cpu0;
+	u32 lps_cpu1;
+	u32 lps_cpu2;
+	u32 lps_cpu3;
+	u32 gpc_gpr;
+	u32 gtor;
+	u32 debug_addr1;
+	u32 debug_addr2;
+	u32 cpu_pgc_up_status1;
+	u32 mix_pgc_up_status0;
+	u32 mix_pgc_up_status1;
+	u32 mix_pgc_up_status2;
+	u32 m4_mix_pgc_up_status0;
+	u32 m4_mix_pgc_up_status1;
+	u32 m4_mix_pgc_up_status2;
+	u32 pu_pgc_up_status0;
+	u32 pu_pgc_up_status1;
+	u32 pu_pgc_up_status2;
+	u32 m4_pu_pgc_up_status0;
+	u32 m4_pu_pgc_up_status1;
+	u32 m4_pu_pgc_up_status2;
+	u32 a53_lp_io_0;
+	u32 a53_lp_io_1;
+	u32 a53_lp_io_2;
+	u32 cpu_pgc_dn_status1;
+	u32 mix_pgc_dn_status0;
+	u32 mix_pgc_dn_status1;
+	u32 mix_pgc_dn_status2;
+	u32 m4_mix_pgc_dn_status0;
+	u32 m4_mix_pgc_dn_status1;
+	u32 m4_mix_pgc_dn_status2;
+	u32 pu_pgc_dn_status0;
+	u32 pu_pgc_dn_status1;
+	u32 pu_pgc_dn_status2;
+	u32 m4_pu_pgc_dn_status0;
+	u32 m4_pu_pgc_dn_status1;
+	u32 m4_pu_pgc_dn_status2;
+	u32 res[3];
+	u32 mix_pdn_flg;
+	u32 pu_pdn_flg;
+	u32 m4_mix_pdn_flg;
+	u32 m4_pu_pdn_flg;
+	u32 imr1_core2;
+	u32 imr2_core2;
+	u32 imr3_core2;
+	u32 imr4_core2;
+	u32 imr1_core3;
+	u32 imr2_core3;
+	u32 imr3_core3;
+	u32 imr4_core3;
+	u32 pgc_ack_sel_pu;
+	u32 pgc_ack_sel_m4_pu;
+	u32 slt15_cfg;
+	u32 slt16_cfg;
+	u32 slt17_cfg;
+	u32 slt18_cfg;
+	u32 slt19_cfg;
+	u32 gpc_pu_pwrhsk;
+	u32 slt0_cfg_pu;
+	u32 slt1_cfg_pu;
+	u32 slt2_cfg_pu;
+	u32 slt3_cfg_pu;
+	u32 slt4_cfg_pu;
+	u32 slt5_cfg_pu;
+	u32 slt6_cfg_pu;
+	u32 slt7_cfg_pu;
+	u32 slt8_cfg_pu;
+	u32 slt9_cfg_pu;
+	u32 slt10_cfg_pu;
+	u32 slt11_cfg_pu;
+	u32 slt12_cfg_pu;
+	u32 slt13_cfg_pu;
+	u32 slt14_cfg_pu;
+	u32 slt15_cfg_pu;
+	u32 slt16_cfg_pu;
+	u32 slt17_cfg_pu;
+	u32 slt18_cfg_pu;
+	u32 slt19_cfg_pu;
+};
+
+struct pgc_reg {
+	u32 pgcr;
+	u32 pgpupscr;
+	u32 pgpdnscr;
+	u32 pgsr;
+	u32 pgauxsw;
+	u32 pgdr;
+};
+#endif
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mm_pins.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mm_pins.h
new file mode 100644
index 000000000..210e96e1d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mm_pins.h
@@ -0,0 +1,691 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8MM_PINS_H__
+#define __ASM_ARCH_IMX8MM_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+	IMX8MM_PAD_GPIO1_IO00_GPIO1_IO0                               =  IOMUX_PAD(0x0290, 0x0028, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO00_CCM_ENET_PHY_REF_CLK_ROOT               =  IOMUX_PAD(0x0290, 0x0028, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO00_XTALOSC_REF_CLK_32K                     =  IOMUX_PAD(0x0290, 0x0028, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO00_CCM_EXT_CLK1                            =  IOMUX_PAD(0x0290, 0x0028, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO01_GPIO1_IO1                               =  IOMUX_PAD(0x0294, 0x002C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO01_PWM1_OUT                                =  IOMUX_PAD(0x0294, 0x002C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO01_XTALOSC_REF_CLK_24M                     =  IOMUX_PAD(0x0294, 0x002C, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO01_CCM_EXT_CLK2                            =  IOMUX_PAD(0x0294, 0x002C, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO02_GPIO1_IO2                               =  IOMUX_PAD(0x0298, 0x0030, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B                            =  IOMUX_PAD(0x0298, 0x0030, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_ANY                          =  IOMUX_PAD(0x0298, 0x0030, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO03_GPIO1_IO3                               =  IOMUX_PAD(0x029C, 0x0034, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO03_USDHC1_VSELECT                          =  IOMUX_PAD(0x029C, 0x0034, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO03_SDMA1_EXT_EVENT0                        =  IOMUX_PAD(0x029C, 0x0034, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO04_GPIO1_IO4                               =  IOMUX_PAD(0x02A0, 0x0038, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO04_USDHC2_VSELECT                          =  IOMUX_PAD(0x02A0, 0x0038, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO04_SDMA1_EXT_EVENT1                        =  IOMUX_PAD(0x02A0, 0x0038, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO05_GPIO1_IO5                               =  IOMUX_PAD(0x02A4, 0x003C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO05_ARM_PLATFORM_M4_NMI                     =  IOMUX_PAD(0x02A4, 0x003C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO05_CCM_PMIC_READY                          =  IOMUX_PAD(0x02A4, 0x003C, 5, 0x04BC, 0, 0),
+	IMX8MM_PAD_GPIO1_IO05_SRC_INT_BOOT                            =  IOMUX_PAD(0x02A4, 0x003C, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO06_GPIO1_IO6                               =  IOMUX_PAD(0x02A8, 0x0040, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO06_ENET1_MDC                               =  IOMUX_PAD(0x02A8, 0x0040, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO06_USDHC1_CD_B                             =  IOMUX_PAD(0x02A8, 0x0040, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO06_CCM_EXT_CLK3                            =  IOMUX_PAD(0x02A8, 0x0040, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO07_GPIO1_IO7                               =  IOMUX_PAD(0x02AC, 0x0044, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO07_ENET1_MDIO                              =  IOMUX_PAD(0x02AC, 0x0044, 1, 0x04C0, 0, 0),
+	IMX8MM_PAD_GPIO1_IO07_USDHC1_WP                               =  IOMUX_PAD(0x02AC, 0x0044, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO07_CCM_EXT_CLK4                            =  IOMUX_PAD(0x02AC, 0x0044, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO08_GPIO1_IO8                               =  IOMUX_PAD(0x02B0, 0x0048, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO08_ENET1_1588_EVENT0_IN                    =  IOMUX_PAD(0x02B0, 0x0048, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO08_USDHC2_RESET_B                          =  IOMUX_PAD(0x02B0, 0x0048, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO08_CCM_WAIT                                =  IOMUX_PAD(0x02B0, 0x0048, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO09_GPIO1_IO9                               =  IOMUX_PAD(0x02B4, 0x004C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO09_ENET1_1588_EVENT0_OUT                   =  IOMUX_PAD(0x02B4, 0x004C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO09_USDHC3_RESET_B                          =  IOMUX_PAD(0x02B4, 0x004C, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO09_SDMA2_EXT_EVENT0                        =  IOMUX_PAD(0x02B4, 0x004C, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO09_CCM_STOP                                =  IOMUX_PAD(0x02B4, 0x004C, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO10_GPIO1_IO10                              =  IOMUX_PAD(0x02B8, 0x0050, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO10_USB1_OTG_ID                             =  IOMUX_PAD(0x02B8, 0x0050, 1, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO11_GPIO1_IO11                              =  IOMUX_PAD(0x02BC, 0x0054, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO11_USB2_OTG_ID                             =  IOMUX_PAD(0x02BC, 0x0054, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO11_USDHC3_VSELECT                          =  IOMUX_PAD(0x02BC, 0x0054, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO11_CCM_PMIC_READY                          =  IOMUX_PAD(0x02BC, 0x0054, 5, 0x04BC, 1, 0),
+	IMX8MM_PAD_GPIO1_IO11_CCM_OUT0                                =  IOMUX_PAD(0x02BC, 0x0054, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO12_GPIO1_IO12                              =  IOMUX_PAD(0x02C0, 0x0058, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO12_USB1_OTG_PWR                            =  IOMUX_PAD(0x02C0, 0x0058, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO12_SDMA2_EXT_EVENT1                        =  IOMUX_PAD(0x02C0, 0x0058, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO12_CCM_OUT1                                =  IOMUX_PAD(0x02C0, 0x0058, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO13_GPIO1_IO13                              =  IOMUX_PAD(0x02C4, 0x005C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO13_USB1_OTG_OC                             =  IOMUX_PAD(0x02C4, 0x005C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO13_PWM2_OUT                                =  IOMUX_PAD(0x02C4, 0x005C, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO13_CCM_OUT2                                =  IOMUX_PAD(0x02C4, 0x005C, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO14_GPIO1_IO14                              =  IOMUX_PAD(0x02C8, 0x0060, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO14_USB2_OTG_PWR                            =  IOMUX_PAD(0x02C8, 0x0060, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO14_USDHC3_CD_B                             =  IOMUX_PAD(0x02C8, 0x0060, 4, 0x0544, 2, 0),
+	IMX8MM_PAD_GPIO1_IO14_PWM3_OUT                                =  IOMUX_PAD(0x02C8, 0x0060, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO14_CCM_CLKO1                               =  IOMUX_PAD(0x02C8, 0x0060, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_GPIO1_IO15_GPIO1_IO15                              =  IOMUX_PAD(0x02CC, 0x0064, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO15_USB2_OTG_OC                             =  IOMUX_PAD(0x02CC, 0x0064, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO15_USDHC3_WP                               =  IOMUX_PAD(0x02CC, 0x0064, 4, 0x0548, 2, 0),
+	IMX8MM_PAD_GPIO1_IO15_PWM4_OUT                                =  IOMUX_PAD(0x02CC, 0x0064, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_GPIO1_IO15_CCM_CLKO2                               =  IOMUX_PAD(0x02CC, 0x0064, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_MDC_ENET1_MDC                                 =  IOMUX_PAD(0x02D0, 0x0068, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_MDC_GPIO1_IO16                                =  IOMUX_PAD(0x02D0, 0x0068, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_MDIO_ENET1_MDIO                               =  IOMUX_PAD(0x02D4, 0x006C, 0, 0x04C0, 1, 0),
+	IMX8MM_PAD_ENET_MDIO_GPIO1_IO17                               =  IOMUX_PAD(0x02D4, 0x006C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_TD3_ENET1_RGMII_TD3                           =  IOMUX_PAD(0x02D8, 0x0070, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TD3_GPIO1_IO18                                =  IOMUX_PAD(0x02D8, 0x0070, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_TD2_ENET1_RGMII_TD2                           =  IOMUX_PAD(0x02DC, 0x0074, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TD2_ENET1_TX_CLK                              =  IOMUX_PAD(0x02DC, 0x0074, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TD2_CCM_ENET_REF_CLK_ROOT                     =  IOMUX_PAD(0x02DC, 0x0074, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TD2_GPIO1_IO19                                =  IOMUX_PAD(0x02DC, 0x0074, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_TD1_ENET1_RGMII_TD1                           =  IOMUX_PAD(0x02E0, 0x0078, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TD1_GPIO1_IO20                                =  IOMUX_PAD(0x02E0, 0x0078, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_TD0_ENET1_RGMII_TD0                           =  IOMUX_PAD(0x02E4, 0x007C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TD0_GPIO1_IO21                                =  IOMUX_PAD(0x02E4, 0x007C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_TX_CTL_ENET1_RGMII_TX_CTL                     =  IOMUX_PAD(0x02E8, 0x0080, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TX_CTL_GPIO1_IO22                             =  IOMUX_PAD(0x02E8, 0x0080, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_TXC_ENET1_RGMII_TXC                           =  IOMUX_PAD(0x02EC, 0x0084, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TXC_ENET1_TX_ER                               =  IOMUX_PAD(0x02EC, 0x0084, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_TXC_GPIO1_IO23                                =  IOMUX_PAD(0x02EC, 0x0084, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_RX_CTL_ENET1_RGMII_RX_CTL                     =  IOMUX_PAD(0x02F0, 0x0088, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_RX_CTL_GPIO1_IO24                             =  IOMUX_PAD(0x02F0, 0x0088, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_RXC_ENET1_RGMII_RXC                           =  IOMUX_PAD(0x02F4, 0x008C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_RXC_ENET1_RX_ER                               =  IOMUX_PAD(0x02F4, 0x008C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_RXC_GPIO1_IO25                                =  IOMUX_PAD(0x02F4, 0x008C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_RD0_ENET1_RGMII_RD0                           =  IOMUX_PAD(0x02F8, 0x0090, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_RD0_GPIO1_IO26                                =  IOMUX_PAD(0x02F8, 0x0090, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_RD1_ENET1_RGMII_RD1                           =  IOMUX_PAD(0x02FC, 0x0094, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_RD1_GPIO1_IO27                                =  IOMUX_PAD(0x02FC, 0x0094, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_RD2_ENET1_RGMII_RD2                           =  IOMUX_PAD(0x0300, 0x0098, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_RD2_GPIO1_IO28                                =  IOMUX_PAD(0x0300, 0x0098, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ENET_RD3_ENET1_RGMII_RD3                           =  IOMUX_PAD(0x0304, 0x009C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ENET_RD3_GPIO1_IO29                                =  IOMUX_PAD(0x0304, 0x009C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_CLK_USDHC1_CLK                                 =  IOMUX_PAD(0x0308, 0x00A0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_CLK_GPIO2_IO0                                  =  IOMUX_PAD(0x0308, 0x00A0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_CMD_USDHC1_CMD                                 =  IOMUX_PAD(0x030C, 0x00A4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_CMD_GPIO2_IO1                                  =  IOMUX_PAD(0x030C, 0x00A4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_DATA0_USDHC1_DATA0                             =  IOMUX_PAD(0x0310, 0x00A8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_DATA0_GPIO2_IO2                                =  IOMUX_PAD(0x0310, 0x00A8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_DATA1_USDHC1_DATA1                             =  IOMUX_PAD(0x0314, 0x00AC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_DATA1_GPIO2_IO3                                =  IOMUX_PAD(0x0314, 0x00AC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_DATA2_USDHC1_DATA2                             =  IOMUX_PAD(0x0318, 0x00B0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_DATA2_GPIO2_IO4                                =  IOMUX_PAD(0x0318, 0x00B0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_DATA3_USDHC1_DATA3                             =  IOMUX_PAD(0x031C, 0x00B4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_DATA3_GPIO2_IO5                                =  IOMUX_PAD(0x031C, 0x00B4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_DATA4_USDHC1_DATA4                             =  IOMUX_PAD(0x0320, 0x00B8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_DATA4_GPIO2_IO6                                =  IOMUX_PAD(0x0320, 0x00B8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_DATA5_USDHC1_DATA5                             =  IOMUX_PAD(0x0324, 0x00BC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_DATA5_GPIO2_IO7                                =  IOMUX_PAD(0x0324, 0x00BC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_DATA6_USDHC1_DATA6                             =  IOMUX_PAD(0x0328, 0x00C0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_DATA6_GPIO2_IO8                                =  IOMUX_PAD(0x0328, 0x00C0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_DATA7_USDHC1_DATA7                             =  IOMUX_PAD(0x032C, 0x00C4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_DATA7_GPIO2_IO9                                =  IOMUX_PAD(0x032C, 0x00C4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_RESET_B_USDHC1_RESET_B                         =  IOMUX_PAD(0x0330, 0x00C8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_RESET_B_GPIO2_IO10                             =  IOMUX_PAD(0x0330, 0x00C8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD1_STROBE_USDHC1_STROBE                           =  IOMUX_PAD(0x0334, 0x00CC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD1_STROBE_GPIO2_IO11                              =  IOMUX_PAD(0x0334, 0x00CC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_CD_B_USDHC2_CD_B                               =  IOMUX_PAD(0x0338, 0x00D0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_CD_B_GPIO2_IO12                                =  IOMUX_PAD(0x0338, 0x00D0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_CLK_USDHC2_CLK                                 =  IOMUX_PAD(0x033C, 0x00D4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_CLK_GPIO2_IO13                                 =  IOMUX_PAD(0x033C, 0x00D4, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_CLK_CCM_OBSERVE0                               =  IOMUX_PAD(0x033C, 0x00D4, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_CMD_USDHC2_CMD                                 =  IOMUX_PAD(0x0340, 0x00D8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_CMD_GPIO2_IO14                                 =  IOMUX_PAD(0x0340, 0x00D8, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_CMD_CCM_OBSERVE1                               =  IOMUX_PAD(0x0340, 0x00D8, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_DATA0_USDHC2_DATA0                             =  IOMUX_PAD(0x0344, 0x00DC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_DATA0_GPIO2_IO15                               =  IOMUX_PAD(0x0344, 0x00DC, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_DATA0_CCM_OBSERVE2                             =  IOMUX_PAD(0x0344, 0x00DC, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_DATA1_USDHC2_DATA1                             =  IOMUX_PAD(0x0348, 0x00E0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_DATA1_GPIO2_IO16                               =  IOMUX_PAD(0x0348, 0x00E0, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_DATA1_CCM_WAIT                                 =  IOMUX_PAD(0x0348, 0x00E0, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_DATA2_USDHC2_DATA2                             =  IOMUX_PAD(0x034C, 0x00E4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_DATA2_GPIO2_IO17                               =  IOMUX_PAD(0x034C, 0x00E4, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_DATA2_CCM_STOP                                 =  IOMUX_PAD(0x034C, 0x00E4, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3                             =  IOMUX_PAD(0x0350, 0x00E8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_DATA3_GPIO2_IO18                               =  IOMUX_PAD(0x0350, 0x00E8, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_DATA3_SRC_EARLY_RESET                          =  IOMUX_PAD(0x0350, 0x00E8, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_RESET_B_USDHC2_RESET_B                         =  IOMUX_PAD(0x0354, 0x00EC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_RESET_B_GPIO2_IO19                             =  IOMUX_PAD(0x0354, 0x00EC, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_RESET_B_SRC_SYSTEM_RESET                       =  IOMUX_PAD(0x0354, 0x00EC, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SD2_WP_USDHC2_WP                                   =  IOMUX_PAD(0x0358, 0x00F0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SD2_WP_GPIO2_IO20                                  =  IOMUX_PAD(0x0358, 0x00F0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_ALE_RAWNAND_ALE                               =  IOMUX_PAD(0x035C, 0x00F4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_ALE_QSPI_A_SCLK                               =  IOMUX_PAD(0x035C, 0x00F4, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_ALE_GPIO3_IO0                                 =  IOMUX_PAD(0x035C, 0x00F4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_CE0_B_RAWNAND_CE0_B                           =  IOMUX_PAD(0x0360, 0x00F8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE0_B_QSPI_A_SS0_B                            =  IOMUX_PAD(0x0360, 0x00F8, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE0_B_GPIO3_IO1                               =  IOMUX_PAD(0x0360, 0x00F8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_CE1_B_RAWNAND_CE1_B                           =  IOMUX_PAD(0x0364, 0x00FC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE1_B_QSPI_A_SS1_B                            =  IOMUX_PAD(0x0364, 0x00FC, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE1_B_USDHC3_STROBE                           =  IOMUX_PAD(0x0364, 0x00FC, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE1_B_GPIO3_IO2                               =  IOMUX_PAD(0x0364, 0x00FC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_CE2_B_RAWNAND_CE2_B                           =  IOMUX_PAD(0x0368, 0x0100, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE2_B_QSPI_B_SS0_B                            =  IOMUX_PAD(0x0368, 0x0100, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE2_B_USDHC3_DATA5                            =  IOMUX_PAD(0x0368, 0x0100, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE2_B_GPIO3_IO3                               =  IOMUX_PAD(0x0368, 0x0100, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_CE3_B_RAWNAND_CE3_B                           =  IOMUX_PAD(0x036C, 0x0104, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE3_B_QSPI_B_SS1_B                            =  IOMUX_PAD(0x036C, 0x0104, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE3_B_USDHC3_DATA6                            =  IOMUX_PAD(0x036C, 0x0104, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CE3_B_GPIO3_IO4                               =  IOMUX_PAD(0x036C, 0x0104, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_CLE_RAWNAND_CLE                               =  IOMUX_PAD(0x0370, 0x0108, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CLE_QSPI_B_SCLK                               =  IOMUX_PAD(0x0370, 0x0108, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CLE_USDHC3_DATA7                              =  IOMUX_PAD(0x0370, 0x0108, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_CLE_GPIO3_IO5                                 =  IOMUX_PAD(0x0370, 0x0108, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DATA00_RAWNAND_DATA00                         =  IOMUX_PAD(0x0374, 0x010C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA00_QSPI_A_DATA0                           =  IOMUX_PAD(0x0374, 0x010C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA00_GPIO3_IO6                              =  IOMUX_PAD(0x0374, 0x010C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DATA01_RAWNAND_DATA01                         =  IOMUX_PAD(0x0378, 0x0110, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA01_QSPI_A_DATA1                           =  IOMUX_PAD(0x0378, 0x0110, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA01_GPIO3_IO7                              =  IOMUX_PAD(0x0378, 0x0110, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DATA02_RAWNAND_DATA02                         =  IOMUX_PAD(0x037C, 0x0114, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA02_QSPI_A_DATA2                           =  IOMUX_PAD(0x037C, 0x0114, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA02_USDHC3_CD_B                            =  IOMUX_PAD(0x037C, 0x0114, 2, 0x0544, 0, 0),
+	IMX8MM_PAD_NAND_DATA02_GPIO3_IO8                              =  IOMUX_PAD(0x037C, 0x0114, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DATA03_RAWNAND_DATA03                         =  IOMUX_PAD(0x0380, 0x0118, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA03_QSPI_A_DATA3                           =  IOMUX_PAD(0x0380, 0x0118, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA03_USDHC3_WP                              =  IOMUX_PAD(0x0380, 0x0118, 2, 0x0548, 0, 0),
+	IMX8MM_PAD_NAND_DATA03_GPIO3_IO9                              =  IOMUX_PAD(0x0380, 0x0118, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DATA04_RAWNAND_DATA04                         =  IOMUX_PAD(0x0384, 0x011C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA04_QSPI_B_DATA0                           =  IOMUX_PAD(0x0384, 0x011C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA04_USDHC3_DATA0                           =  IOMUX_PAD(0x0384, 0x011C, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA04_GPIO3_IO10                             =  IOMUX_PAD(0x0384, 0x011C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DATA05_RAWNAND_DATA05                         =  IOMUX_PAD(0x0388, 0x0120, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA05_QSPI_B_DATA1                           =  IOMUX_PAD(0x0388, 0x0120, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA05_USDHC3_DATA1                           =  IOMUX_PAD(0x0388, 0x0120, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA05_GPIO3_IO11                             =  IOMUX_PAD(0x0388, 0x0120, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DATA06_RAWNAND_DATA06                         =  IOMUX_PAD(0x038C, 0x0124, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA06_QSPI_B_DATA2                           =  IOMUX_PAD(0x038C, 0x0124, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA06_USDHC3_DATA2                           =  IOMUX_PAD(0x038C, 0x0124, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA06_GPIO3_IO12                             =  IOMUX_PAD(0x038C, 0x0124, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DATA07_RAWNAND_DATA07                         =  IOMUX_PAD(0x0390, 0x0128, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA07_QSPI_B_DATA3                           =  IOMUX_PAD(0x0390, 0x0128, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA07_USDHC3_DATA3                           =  IOMUX_PAD(0x0390, 0x0128, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DATA07_GPIO3_IO13                             =  IOMUX_PAD(0x0390, 0x0128, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_DQS_RAWNAND_DQS                               =  IOMUX_PAD(0x0394, 0x012C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DQS_QSPI_A_DQS                                =  IOMUX_PAD(0x0394, 0x012C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_DQS_GPIO3_IO14                                =  IOMUX_PAD(0x0394, 0x012C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_RE_B_RAWNAND_RE_B                             =  IOMUX_PAD(0x0398, 0x0130, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_RE_B_QSPI_B_DQS                               =  IOMUX_PAD(0x0398, 0x0130, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_RE_B_USDHC3_DATA4                             =  IOMUX_PAD(0x0398, 0x0130, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_RE_B_GPIO3_IO15                               =  IOMUX_PAD(0x0398, 0x0130, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_READY_B_RAWNAND_READY_B                       =  IOMUX_PAD(0x039C, 0x0134, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_READY_B_USDHC3_RESET_B                        =  IOMUX_PAD(0x039C, 0x0134, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_READY_B_GPIO3_IO16                            =  IOMUX_PAD(0x039C, 0x0134, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_WE_B_RAWNAND_WE_B                             =  IOMUX_PAD(0x03A0, 0x0138, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_WE_B_USDHC3_CLK                               =  IOMUX_PAD(0x03A0, 0x0138, 2 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_WE_B_GPIO3_IO17                               =  IOMUX_PAD(0x03A0, 0x0138, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_NAND_WP_B_RAWNAND_WP_B                             =  IOMUX_PAD(0x03A4, 0x013C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_WP_B_USDHC3_CMD                               =  IOMUX_PAD(0x03A4, 0x013C, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_NAND_WP_B_GPIO3_IO18                               =  IOMUX_PAD(0x03A4, 0x013C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI5_RXFS_SAI5_RX_SYNC                             =  IOMUX_PAD(0x03A8, 0x0140, 0, 0x04E4, 0, 0),
+	IMX8MM_PAD_SAI5_RXFS_SAI1_TX_DATA0                            =  IOMUX_PAD(0x03A8, 0x0140, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_RXFS_GPIO3_IO19                               =  IOMUX_PAD(0x03A8, 0x0140, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI5_RXC_SAI5_RX_BCLK                              =  IOMUX_PAD(0x03AC, 0x0144, 0, 0x04D0, 0, 0),
+	IMX8MM_PAD_SAI5_RXC_SAI1_TX_DATA1                             =  IOMUX_PAD(0x03AC, 0x0144, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_RXC_PDM_CLK                                   =  IOMUX_PAD(0x03AC, 0x0144, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_RXC_GPIO3_IO20                                =  IOMUX_PAD(0x03AC, 0x0144, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI5_RXD0_SAI5_RX_DATA0                            =  IOMUX_PAD(0x03B0, 0x0148, 0, 0x04D4, 0, 0),
+	IMX8MM_PAD_SAI5_RXD0_SAI1_TX_DATA2                            =  IOMUX_PAD(0x03B0, 0x0148, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_RXD0_PDM_BIT_STREAM0                          =  IOMUX_PAD(0x03B0, 0x0148, 4, 0x0534, 0, 0),
+	IMX8MM_PAD_SAI5_RXD0_GPIO3_IO21                               =  IOMUX_PAD(0x03B0, 0x0148, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI5_RXD1_SAI5_RX_DATA1                            =  IOMUX_PAD(0x03B4, 0x014C, 0, 0x04D8, 0, 0),
+	IMX8MM_PAD_SAI5_RXD1_SAI1_TX_DATA3                            =  IOMUX_PAD(0x03B4, 0x014C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_RXD1_SAI1_TX_SYNC                             =  IOMUX_PAD(0x03B4, 0x014C, 2, 0x04CC, 0, 0),
+	IMX8MM_PAD_SAI5_RXD1_SAI5_TX_SYNC                             =  IOMUX_PAD(0x03B4, 0x014C, 3, 0x04EC, 0, 0),
+	IMX8MM_PAD_SAI5_RXD1_PDM_BIT_STREAM1                          =  IOMUX_PAD(0x03B4, 0x014C, 4, 0x0538, 0, 0),
+	IMX8MM_PAD_SAI5_RXD1_GPIO3_IO22                               =  IOMUX_PAD(0x03B4, 0x014C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI5_RXD2_SAI5_RX_DATA2                            =  IOMUX_PAD(0x03B8, 0x0150, 0, 0x04DC, 0, 0),
+	IMX8MM_PAD_SAI5_RXD2_SAI1_TX_DATA4                            =  IOMUX_PAD(0x03B8, 0x0150, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_RXD2_SAI1_TX_SYNC                             =  IOMUX_PAD(0x03B8, 0x0150, 2, 0x04CC, 1, 0),
+	IMX8MM_PAD_SAI5_RXD2_SAI5_TX_BCLK                             =  IOMUX_PAD(0x03B8, 0x0150, 3, 0x04E8, 0, 0),
+	IMX8MM_PAD_SAI5_RXD2_PDM_BIT_STREAM2                          =  IOMUX_PAD(0x03B8, 0x0150, 4, 0x053C, 0, 0),
+	IMX8MM_PAD_SAI5_RXD2_GPIO3_IO23                               =  IOMUX_PAD(0x03B8, 0x0150, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI5_RXD3_SAI5_RX_DATA3                            =  IOMUX_PAD(0x03BC, 0x0154, 0, 0x04E0, 0, 0),
+	IMX8MM_PAD_SAI5_RXD3_SAI1_TX_DATA5                            =  IOMUX_PAD(0x03BC, 0x0154, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_RXD3_SAI1_TX_SYNC                             =  IOMUX_PAD(0x03BC, 0x0154, 2, 0x04CC, 2, 0),
+	IMX8MM_PAD_SAI5_RXD3_SAI5_TX_DATA0                            =  IOMUX_PAD(0x03BC, 0x0154, 3, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_RXD3_PDM_BIT_STREAM3                          =  IOMUX_PAD(0x03BC, 0x0154, 4, 0x0540, 0, 0),
+	IMX8MM_PAD_SAI5_RXD3_GPIO3_IO24                               =  IOMUX_PAD(0x03BC, 0x0154, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI5_MCLK_SAI5_MCLK                                =  IOMUX_PAD(0x03C0, 0x0158, 0, 0x052C, 0, 0),
+	IMX8MM_PAD_SAI5_MCLK_SAI1_TX_BCLK                             =  IOMUX_PAD(0x03C0, 0x0158, 1, 0x04C8, 0, 0),
+	IMX8MM_PAD_SAI5_MCLK_GPIO3_IO25                               =  IOMUX_PAD(0x03C0, 0x0158, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI5_MCLK_SRC_TESTER_ACK                           =  IOMUX_PAD(0x03C0, 0x0158, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXFS_SAI1_RX_SYNC                             =  IOMUX_PAD(0x03C4, 0x015C, 0, 0x04C4, 0, 0),
+	IMX8MM_PAD_SAI1_RXFS_SAI5_RX_SYNC                             =  IOMUX_PAD(0x03C4, 0x015C, 1, 0x04E4, 1, 0),
+	IMX8MM_PAD_SAI1_RXFS_ARM_PLATFORM_TRACE_CLK                   =  IOMUX_PAD(0x03C4, 0x015C, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXFS_GPIO4_IO0                                =  IOMUX_PAD(0x03C4, 0x015C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXC_SAI1_RX_BCLK                              =  IOMUX_PAD(0x03C8, 0x0160, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXC_SAI5_RX_BCLK                              =  IOMUX_PAD(0x03C8, 0x0160, 1, 0x04D0, 1, 0),
+	IMX8MM_PAD_SAI1_RXC_ARM_PLATFORM_TRACE_CTL                    =  IOMUX_PAD(0x03C8, 0x0160, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXC_GPIO4_IO1                                 =  IOMUX_PAD(0x03C8, 0x0160, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXD0_SAI1_RX_DATA0                            =  IOMUX_PAD(0x03CC, 0x0164, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD0_SAI5_RX_DATA0                            =  IOMUX_PAD(0x03CC, 0x0164, 1, 0x04D4, 1, 0),
+	IMX8MM_PAD_SAI1_RXD0_SAI1_TX_DATA1                            =  IOMUX_PAD(0x03CC, 0x0164, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD0_PDM_BIT_STREAM0                          =  IOMUX_PAD(0x03CC, 0x0164, 3, 0x0534, 1, 0),
+	IMX8MM_PAD_SAI1_RXD0_ARM_PLATFORM_TRACE0                      =  IOMUX_PAD(0x03CC, 0x0164, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD0_GPIO4_IO2                                =  IOMUX_PAD(0x03CC, 0x0164, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD0_SRC_BOOT_CFG0                            =  IOMUX_PAD(0x03CC, 0x0164, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXD1_SAI1_RX_DATA1                            =  IOMUX_PAD(0x03D0, 0x0168, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD1_SAI5_RX_DATA1                            =  IOMUX_PAD(0x03D0, 0x0168, 1, 0x04D8, 1, 0),
+	IMX8MM_PAD_SAI1_RXD1_PDM_BIT_STREAM1                          =  IOMUX_PAD(0x03D0, 0x0168, 3, 0x0538, 1, 0),
+	IMX8MM_PAD_SAI1_RXD1_ARM_PLATFORM_TRACE1                      =  IOMUX_PAD(0x03D0, 0x0168, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD1_GPIO4_IO3                                =  IOMUX_PAD(0x03D0, 0x0168, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD1_SRC_BOOT_CFG1                            =  IOMUX_PAD(0x03D0, 0x0168, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXD2_SAI1_RX_DATA2                            =  IOMUX_PAD(0x03D4, 0x016C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD2_SAI5_RX_DATA2                            =  IOMUX_PAD(0x03D4, 0x016C, 1, 0x04DC, 1, 0),
+	IMX8MM_PAD_SAI1_RXD2_PDM_BIT_STREAM2                          =  IOMUX_PAD(0x03D4, 0x016C, 3, 0x053C, 1, 0),
+	IMX8MM_PAD_SAI1_RXD2_ARM_PLATFORM_TRACE2                      =  IOMUX_PAD(0x03D4, 0x016C, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD2_GPIO4_IO4                                =  IOMUX_PAD(0x03D4, 0x016C, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD2_SRC_BOOT_CFG2                            =  IOMUX_PAD(0x03D4, 0x016C, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXD3_SAI1_RX_DATA3                            =  IOMUX_PAD(0x03D8, 0x0170, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD3_SAI5_RX_DATA3                            =  IOMUX_PAD(0x03D8, 0x0170, 1, 0x04E0, 1, 0),
+	IMX8MM_PAD_SAI1_RXD3_PDM_BIT_STREAM3                          =  IOMUX_PAD(0x03D8, 0x0170, 3, 0x0540, 1, 0),
+	IMX8MM_PAD_SAI1_RXD3_ARM_PLATFORM_TRACE3                      =  IOMUX_PAD(0x03D8, 0x0170, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD3_GPIO4_IO5                                =  IOMUX_PAD(0x03D8, 0x0170, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD3_SRC_BOOT_CFG3                            =  IOMUX_PAD(0x03D8, 0x0170, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXD4_SAI1_RX_DATA4                            =  IOMUX_PAD(0x03DC, 0x0174, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD4_SAI6_TX_BCLK                             =  IOMUX_PAD(0x03DC, 0x0174, 1, 0x051C, 0, 0),
+	IMX8MM_PAD_SAI1_RXD4_SAI6_RX_BCLK                             =  IOMUX_PAD(0x03DC, 0x0174, 2, 0x0510, 0, 0),
+	IMX8MM_PAD_SAI1_RXD4_ARM_PLATFORM_TRACE4                      =  IOMUX_PAD(0x03DC, 0x0174, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD4_GPIO4_IO6                                =  IOMUX_PAD(0x03DC, 0x0174, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD4_SRC_BOOT_CFG4                            =  IOMUX_PAD(0x03DC, 0x0174, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXD5_SAI1_RX_DATA5                            =  IOMUX_PAD(0x03E0, 0x0178, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD5_SAI6_TX_DATA0                            =  IOMUX_PAD(0x03E0, 0x0178, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD5_SAI6_RX_DATA0                            =  IOMUX_PAD(0x03E0, 0x0178, 2, 0x0514, 0, 0),
+	IMX8MM_PAD_SAI1_RXD5_SAI1_RX_SYNC                             =  IOMUX_PAD(0x03E0, 0x0178, 3, 0x04C4, 1, 0),
+	IMX8MM_PAD_SAI1_RXD5_ARM_PLATFORM_TRACE5                      =  IOMUX_PAD(0x03E0, 0x0178, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD5_GPIO4_IO7                                =  IOMUX_PAD(0x03E0, 0x0178, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD5_SRC_BOOT_CFG5                            =  IOMUX_PAD(0x03E0, 0x0178, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXD6_SAI1_RX_DATA6                            =  IOMUX_PAD(0x03E4, 0x017C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD6_SAI6_TX_SYNC                             =  IOMUX_PAD(0x03E4, 0x017C, 1, 0x0520, 0, 0),
+	IMX8MM_PAD_SAI1_RXD6_SAI6_RX_SYNC                             =  IOMUX_PAD(0x03E4, 0x017C, 2, 0x0518, 0, 0),
+	IMX8MM_PAD_SAI1_RXD6_ARM_PLATFORM_TRACE6                      =  IOMUX_PAD(0x03E4, 0x017C, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD6_GPIO4_IO8                                =  IOMUX_PAD(0x03E4, 0x017C, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD6_SRC_BOOT_CFG6                            =  IOMUX_PAD(0x03E4, 0x017C, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_RXD7_SAI1_RX_DATA7                            =  IOMUX_PAD(0x03E8, 0x0180, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD7_SAI6_MCLK                                =  IOMUX_PAD(0x03E8, 0x0180, 1, 0x0530, 0, 0),
+	IMX8MM_PAD_SAI1_RXD7_SAI1_TX_SYNC                             =  IOMUX_PAD(0x03E8, 0x0180, 2, 0x04CC, 4, 0),
+	IMX8MM_PAD_SAI1_RXD7_SAI1_TX_DATA4                            =  IOMUX_PAD(0x03E8, 0x0180, 3, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD7_ARM_PLATFORM_TRACE7                      =  IOMUX_PAD(0x03E8, 0x0180, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD7_GPIO4_IO9                                =  IOMUX_PAD(0x03E8, 0x0180, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_RXD7_SRC_BOOT_CFG7                            =  IOMUX_PAD(0x03E8, 0x0180, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXFS_SAI1_TX_SYNC                             =  IOMUX_PAD(0x03EC, 0x0184, 0, 0x04CC, 3, 0),
+	IMX8MM_PAD_SAI1_TXFS_SAI5_TX_SYNC                             =  IOMUX_PAD(0x03EC, 0x0184, 1, 0x04EC, 1, 0),
+	IMX8MM_PAD_SAI1_TXFS_ARM_PLATFORM_EVENTO                      =  IOMUX_PAD(0x03EC, 0x0184, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXFS_GPIO4_IO10                               =  IOMUX_PAD(0x03EC, 0x0184, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXC_SAI1_TX_BCLK                              =  IOMUX_PAD(0x03F0, 0x0188, 0, 0x04C8, 1, 0),
+	IMX8MM_PAD_SAI1_TXC_SAI5_TX_BCLK                              =  IOMUX_PAD(0x03F0, 0x0188, 1, 0x04E8, 1, 0),
+	IMX8MM_PAD_SAI1_TXC_ARM_PLATFORM_EVENTI                       =  IOMUX_PAD(0x03F0, 0x0188, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXC_GPIO4_IO11                                =  IOMUX_PAD(0x03F0, 0x0188, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXD0_SAI1_TX_DATA0                            =  IOMUX_PAD(0x03F4, 0x018C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD0_SAI5_TX_DATA0                            =  IOMUX_PAD(0x03F4, 0x018C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD0_ARM_PLATFORM_TRACE8                      =  IOMUX_PAD(0x03F4, 0x018C, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD0_GPIO4_IO12                               =  IOMUX_PAD(0x03F4, 0x018C, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD0_SRC_BOOT_CFG8                            =  IOMUX_PAD(0x03F4, 0x018C, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXD1_SAI1_TX_DATA1                            =  IOMUX_PAD(0x03F8, 0x0190, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD1_SAI5_TX_DATA1                            =  IOMUX_PAD(0x03F8, 0x0190, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD1_ARM_PLATFORM_TRACE9                      =  IOMUX_PAD(0x03F8, 0x0190, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD1_GPIO4_IO13                               =  IOMUX_PAD(0x03F8, 0x0190, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD1_SRC_BOOT_CFG9                            =  IOMUX_PAD(0x03F8, 0x0190, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXD2_SAI1_TX_DATA2                            =  IOMUX_PAD(0x03FC, 0x0194, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD2_SAI5_TX_DATA2                            =  IOMUX_PAD(0x03FC, 0x0194, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD2_ARM_PLATFORM_TRACE10                     =  IOMUX_PAD(0x03FC, 0x0194, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD2_GPIO4_IO14                               =  IOMUX_PAD(0x03FC, 0x0194, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD2_SRC_BOOT_CFG10                           =  IOMUX_PAD(0x03FC, 0x0194, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXD3_SAI1_TX_DATA3                            =  IOMUX_PAD(0x0400, 0x0198, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD3_SAI5_TX_DATA3                            =  IOMUX_PAD(0x0400, 0x0198, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD3_ARM_PLATFORM_TRACE11                     =  IOMUX_PAD(0x0400, 0x0198, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD3_GPIO4_IO15                               =  IOMUX_PAD(0x0400, 0x0198, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD3_SRC_BOOT_CFG11                           =  IOMUX_PAD(0x0400, 0x0198, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXD4_SAI1_TX_DATA4                            =  IOMUX_PAD(0x0404, 0x019C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD4_SAI6_RX_BCLK                             =  IOMUX_PAD(0x0404, 0x019C, 1, 0x0510, 1, 0),
+	IMX8MM_PAD_SAI1_TXD4_SAI6_TX_BCLK                             =  IOMUX_PAD(0x0404, 0x019C, 2, 0x051C, 1, 0),
+	IMX8MM_PAD_SAI1_TXD4_ARM_PLATFORM_TRACE12                     =  IOMUX_PAD(0x0404, 0x019C, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD4_GPIO4_IO16                               =  IOMUX_PAD(0x0404, 0x019C, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD4_SRC_BOOT_CFG12                           =  IOMUX_PAD(0x0404, 0x019C, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXD5_SAI1_TX_DATA5                            =  IOMUX_PAD(0x0408, 0x01A0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD5_SAI6_RX_DATA0                            =  IOMUX_PAD(0x0408, 0x01A0, 1, 0x0514, 1, 0),
+	IMX8MM_PAD_SAI1_TXD5_SAI6_TX_DATA0                            =  IOMUX_PAD(0x0408, 0x01A0, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD5_ARM_PLATFORM_TRACE13                     =  IOMUX_PAD(0x0408, 0x01A0, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD5_GPIO4_IO17                               =  IOMUX_PAD(0x0408, 0x01A0, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD5_SRC_BOOT_CFG13                           =  IOMUX_PAD(0x0408, 0x01A0, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXD6_SAI1_TX_DATA6                            =  IOMUX_PAD(0x040C, 0x01A4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD6_SAI6_RX_SYNC                             =  IOMUX_PAD(0x040C, 0x01A4, 1, 0x0518, 1, 0),
+	IMX8MM_PAD_SAI1_TXD6_SAI6_TX_SYNC                             =  IOMUX_PAD(0x040C, 0x01A4, 2, 0x0520, 1, 0),
+	IMX8MM_PAD_SAI1_TXD6_ARM_PLATFORM_TRACE14                     =  IOMUX_PAD(0x040C, 0x01A4, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD6_GPIO4_IO18                               =  IOMUX_PAD(0x040C, 0x01A4, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD6_SRC_BOOT_CFG14                           =  IOMUX_PAD(0x040C, 0x01A4, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_TXD7_SAI1_TX_DATA7                            =  IOMUX_PAD(0x0410, 0x01A8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD7_SAI6_MCLK                                =  IOMUX_PAD(0x0410, 0x01A8, 1, 0x0530, 1, 0),
+	IMX8MM_PAD_SAI1_TXD7_PDM_CLK                                  =  IOMUX_PAD(0x0410, 0x01A8, 3, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD7_ARM_PLATFORM_TRACE15                     =  IOMUX_PAD(0x0410, 0x01A8, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD7_GPIO4_IO19                               =  IOMUX_PAD(0x0410, 0x01A8, 5, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_TXD7_SRC_BOOT_CFG15                           =  IOMUX_PAD(0x0410, 0x01A8, 6, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI1_MCLK_SAI1_MCLK                                =  IOMUX_PAD(0x0414, 0x01AC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_MCLK_SAI5_MCLK                                =  IOMUX_PAD(0x0414, 0x01AC, 1, 0x052C, 1, 0),
+	IMX8MM_PAD_SAI1_MCLK_SAI1_TX_BCLK                             =  IOMUX_PAD(0x0414, 0x01AC, 2, 0x04C8, 2, 0),
+	IMX8MM_PAD_SAI1_MCLK_PDM_CLK                                  =  IOMUX_PAD(0x0414, 0x01AC, 3, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI1_MCLK_GPIO4_IO20                               =  IOMUX_PAD(0x0414, 0x01AC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI2_RXFS_SAI2_RX_SYNC                             =  IOMUX_PAD(0x0418, 0x01B0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXFS_SAI5_TX_SYNC                             =  IOMUX_PAD(0x0418, 0x01B0, 1, 0x04EC, 2, 0),
+	IMX8MM_PAD_SAI2_RXFS_SAI5_TX_DATA1                            =  IOMUX_PAD(0x0418, 0x01B0, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXFS_SAI2_RX_DATA1                            =  IOMUX_PAD(0x0418, 0x01B0, 3, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXFS_UART1_TX                                 =  IOMUX_PAD(0x0418, 0x01B0, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXFS_UART1_RX                                 =  IOMUX_PAD(0x0418, 0x01B0, 4, 0x04F4, 2, 0),
+	IMX8MM_PAD_SAI2_RXFS_GPIO4_IO21                               =  IOMUX_PAD(0x0418, 0x01B0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI2_RXC_SAI2_RX_BCLK                              =  IOMUX_PAD(0x041C, 0x01B4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXC_SAI5_TX_BCLK                              =  IOMUX_PAD(0x041C, 0x01B4, 1, 0x04E8, 2, 0),
+	IMX8MM_PAD_SAI2_RXC_UART1_RX                                  =  IOMUX_PAD(0x041C, 0x01B4, 4, 0x04F4, 3, 0),
+	IMX8MM_PAD_SAI2_RXC_UART1_TX                                  =  IOMUX_PAD(0x041C, 0x01B4, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXC_GPIO4_IO22                                =  IOMUX_PAD(0x041C, 0x01B4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI2_RXD0_SAI2_RX_DATA0                            =  IOMUX_PAD(0x0420, 0x01B8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXD0_SAI5_TX_DATA0                            =  IOMUX_PAD(0x0420, 0x01B8, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXD0_UART1_RTS_B                              =  IOMUX_PAD(0x0420, 0x01B8, 4, 0x04F0, 2, 0),
+	IMX8MM_PAD_SAI2_RXD0_UART1_CTS_B                              =  IOMUX_PAD(0x0420, 0x01B8, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_RXD0_GPIO4_IO23                               =  IOMUX_PAD(0x0420, 0x01B8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI2_TXFS_SAI2_TX_SYNC                             =  IOMUX_PAD(0x0424, 0x01BC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_TXFS_SAI5_TX_DATA1                            =  IOMUX_PAD(0x0424, 0x01BC, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_TXFS_SAI2_TX_DATA1                            =  IOMUX_PAD(0x0424, 0x01BC, 3, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_TXFS_UART1_CTS_B                              =  IOMUX_PAD(0x0424, 0x01BC, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_TXFS_UART1_RTS_B                              =  IOMUX_PAD(0x0424, 0x01BC, 4, 0x04F0, 3, 0),
+	IMX8MM_PAD_SAI2_TXFS_GPIO4_IO24                               =  IOMUX_PAD(0x0424, 0x01BC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI2_TXC_SAI2_TX_BCLK                              =  IOMUX_PAD(0x0428, 0x01C0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_TXC_SAI5_TX_DATA2                             =  IOMUX_PAD(0x0428, 0x01C0, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_TXC_GPIO4_IO25                                =  IOMUX_PAD(0x0428, 0x01C0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI2_TXD0_SAI2_TX_DATA0                            =  IOMUX_PAD(0x042C, 0x01C4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_TXD0_SAI5_TX_DATA3                            =  IOMUX_PAD(0x042C, 0x01C4, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_TXD0_GPIO4_IO26                               =  IOMUX_PAD(0x042C, 0x01C4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI2_MCLK_SAI2_MCLK                                =  IOMUX_PAD(0x0430, 0x01C8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI2_MCLK_SAI5_MCLK                                =  IOMUX_PAD(0x0430, 0x01C8, 1, 0x052C, 2, 0),
+	IMX8MM_PAD_SAI2_MCLK_GPIO4_IO27                               =  IOMUX_PAD(0x0430, 0x01C8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI3_RXFS_SAI3_RX_SYNC                             =  IOMUX_PAD(0x0434, 0x01CC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXFS_GPT1_CAPTURE1                            =  IOMUX_PAD(0x0434, 0x01CC, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXFS_SAI5_RX_SYNC                             =  IOMUX_PAD(0x0434, 0x01CC, 2, 0x04E4, 2, 0),
+	IMX8MM_PAD_SAI3_RXFS_SAI3_RX_DATA1                            =  IOMUX_PAD(0x0434, 0x01CC, 3, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXFS_GPIO4_IO28                               =  IOMUX_PAD(0x0434, 0x01CC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI3_RXC_SAI3_RX_BCLK                              =  IOMUX_PAD(0x0438, 0x01D0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXC_GPT1_CLK                                  =  IOMUX_PAD(0x0438, 0x01D0, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXC_SAI5_RX_BCLK                              =  IOMUX_PAD(0x0438, 0x01D0, 2, 0x04D0, 2, 0),
+	IMX8MM_PAD_SAI3_RXC_UART2_CTS_B                               =  IOMUX_PAD(0x0438, 0x01D0, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXC_UART2_RTS_B                               =  IOMUX_PAD(0x0438, 0x01D0, 4, 0x04F8, 2, 0),
+	IMX8MM_PAD_SAI3_RXC_GPIO4_IO29                                =  IOMUX_PAD(0x0438, 0x01D0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI3_RXD_SAI3_RX_DATA0                             =  IOMUX_PAD(0x043C, 0x01D4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXD_GPT1_COMPARE1                             =  IOMUX_PAD(0x043C, 0x01D4, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXD_SAI5_RX_DATA0                             =  IOMUX_PAD(0x043C, 0x01D4, 2, 0x04D4, 2, 0),
+	IMX8MM_PAD_SAI3_RXD_UART2_RTS_B                               =  IOMUX_PAD(0x043C, 0x01D4, 4, 0x04F8, 3, 0),
+	IMX8MM_PAD_SAI3_RXD_UART2_CTS_B                               =  IOMUX_PAD(0x043C, 0x01D4, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_RXD_GPIO4_IO30                                =  IOMUX_PAD(0x043C, 0x01D4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI3_TXFS_SAI3_TX_SYNC                             =  IOMUX_PAD(0x0440, 0x01D8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXFS_GPT1_CAPTURE2                            =  IOMUX_PAD(0x0440, 0x01D8, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXFS_SAI5_RX_DATA1                            =  IOMUX_PAD(0x0440, 0x01D8, 2, 0x04D8, 2, 0),
+	IMX8MM_PAD_SAI3_TXFS_SAI3_TX_DATA1                            =  IOMUX_PAD(0x0440, 0x01D8, 3, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXFS_UART2_RX                                 =  IOMUX_PAD(0x0440, 0x01D8, 4, 0x04FC, 2, 0),
+	IMX8MM_PAD_SAI3_TXFS_UART2_TX                                 =  IOMUX_PAD(0x0440, 0x01D8, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXFS_GPIO4_IO31                               =  IOMUX_PAD(0x0440, 0x01D8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI3_TXC_SAI3_TX_BCLK                              =  IOMUX_PAD(0x0444, 0x01DC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXC_GPT1_COMPARE2                             =  IOMUX_PAD(0x0444, 0x01DC, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXC_SAI5_RX_DATA2                             =  IOMUX_PAD(0x0444, 0x01DC, 2, 0x04DC, 2, 0),
+	IMX8MM_PAD_SAI3_TXC_UART2_TX                                  =  IOMUX_PAD(0x0444, 0x01DC, 4, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXC_UART2_RX                                  =  IOMUX_PAD(0x0444, 0x01DC, 4, 0x04FC, 3, 0),
+	IMX8MM_PAD_SAI3_TXC_GPIO5_IO0                                 =  IOMUX_PAD(0x0444, 0x01DC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI3_TXD_SAI3_TX_DATA0                             =  IOMUX_PAD(0x0448, 0x01E0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXD_GPT1_COMPARE3                             =  IOMUX_PAD(0x0448, 0x01E0, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_TXD_SAI5_RX_DATA3                             =  IOMUX_PAD(0x0448, 0x01E0, 2, 0x04E0, 2, 0),
+	IMX8MM_PAD_SAI3_TXD_GPIO5_IO1                                 =  IOMUX_PAD(0x0448, 0x01E0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SAI3_MCLK_SAI3_MCLK                                =  IOMUX_PAD(0x044C, 0x01E4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_MCLK_PWM4_OUT                                 =  IOMUX_PAD(0x044C, 0x01E4, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SAI3_MCLK_SAI5_MCLK                                =  IOMUX_PAD(0x044C, 0x01E4, 2, 0x052C, 3, 0),
+	IMX8MM_PAD_SAI3_MCLK_GPIO5_IO2                                =  IOMUX_PAD(0x044C, 0x01E4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SPDIF_TX_SPDIF1_OUT                                =  IOMUX_PAD(0x0450, 0x01E8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SPDIF_TX_PWM3_OUT                                  =  IOMUX_PAD(0x0450, 0x01E8, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SPDIF_TX_GPIO5_IO3                                 =  IOMUX_PAD(0x0450, 0x01E8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SPDIF_RX_SPDIF1_IN                                 =  IOMUX_PAD(0x0454, 0x01EC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SPDIF_RX_PWM2_OUT                                  =  IOMUX_PAD(0x0454, 0x01EC, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SPDIF_RX_GPIO5_IO4                                 =  IOMUX_PAD(0x0454, 0x01EC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                       =  IOMUX_PAD(0x0458, 0x01F0, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_SPDIF_EXT_CLK_PWM1_OUT                             =  IOMUX_PAD(0x0458, 0x01F0, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_SPDIF_EXT_CLK_GPIO5_IO5                            =  IOMUX_PAD(0x0458, 0x01F0, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ECSPI1_SCLK_ECSPI1_SCLK                            =  IOMUX_PAD(0x045C, 0x01F4, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI1_SCLK_UART3_RX                               =  IOMUX_PAD(0x045C, 0x01F4, 1, 0x0504, 0, 0),
+	IMX8MM_PAD_ECSPI1_SCLK_UART3_TX                               =  IOMUX_PAD(0x045C, 0x01F4, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI1_SCLK_GPIO5_IO6                              =  IOMUX_PAD(0x045C, 0x01F4, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ECSPI1_MOSI_ECSPI1_MOSI                            =  IOMUX_PAD(0x0460, 0x01F8, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI1_MOSI_UART3_TX                               =  IOMUX_PAD(0x0460, 0x01F8, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI1_MOSI_UART3_RX                               =  IOMUX_PAD(0x0460, 0x01F8, 1, 0x0504, 1, 0),
+	IMX8MM_PAD_ECSPI1_MOSI_GPIO5_IO7                              =  IOMUX_PAD(0x0460, 0x01F8, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ECSPI1_MISO_ECSPI1_MISO                            =  IOMUX_PAD(0x0464, 0x01FC, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI1_MISO_UART3_CTS_B                            =  IOMUX_PAD(0x0464, 0x01FC, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI1_MISO_UART3_RTS_B                            =  IOMUX_PAD(0x0464, 0x01FC, 1, 0x0500, 0, 0),
+	IMX8MM_PAD_ECSPI1_MISO_GPIO5_IO8                              =  IOMUX_PAD(0x0464, 0x01FC, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ECSPI1_SS0_ECSPI1_SS0                              =  IOMUX_PAD(0x0468, 0x0200, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI1_SS0_UART3_RTS_B                             =  IOMUX_PAD(0x0468, 0x0200, 1, 0x0500, 1, 0),
+	IMX8MM_PAD_ECSPI1_SS0_UART3_CTS_B                             =  IOMUX_PAD(0x0468, 0x0200, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI1_SS0_GPIO5_IO9                               =  IOMUX_PAD(0x0468, 0x0200, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ECSPI2_SCLK_ECSPI2_SCLK                            =  IOMUX_PAD(0x046C, 0x0204, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI2_SCLK_UART4_RX                               =  IOMUX_PAD(0x046C, 0x0204, 1, 0x050C, 0, 0),
+	IMX8MM_PAD_ECSPI2_SCLK_UART4_TX                               =  IOMUX_PAD(0x046C, 0x0204, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI2_SCLK_GPIO5_IO10                             =  IOMUX_PAD(0x046C, 0x0204, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ECSPI2_MOSI_ECSPI2_MOSI                            =  IOMUX_PAD(0x0470, 0x0208, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI2_MOSI_UART4_TX                               =  IOMUX_PAD(0x0470, 0x0208, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI2_MOSI_UART4_RX                               =  IOMUX_PAD(0x0470, 0x0208, 1, 0x050C, 1, 0),
+	IMX8MM_PAD_ECSPI2_MOSI_GPIO5_IO11                             =  IOMUX_PAD(0x0470, 0x0208, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ECSPI2_MISO_ECSPI2_MISO                            =  IOMUX_PAD(0x0474, 0x020C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI2_MISO_UART4_CTS_B                            =  IOMUX_PAD(0x0474, 0x020C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI2_MISO_UART4_RTS_B                            =  IOMUX_PAD(0x0474, 0x020C, 1, 0x0508, 0, 0),
+	IMX8MM_PAD_ECSPI2_MISO_GPIO5_IO12                             =  IOMUX_PAD(0x0474, 0x020C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_ECSPI2_SS0_ECSPI2_SS0                              =  IOMUX_PAD(0x0478, 0x0210, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI2_SS0_UART4_RTS_B                             =  IOMUX_PAD(0x0478, 0x0210, 1, 0x0508, 1, 0),
+	IMX8MM_PAD_ECSPI2_SS0_UART4_CTS_B                             =  IOMUX_PAD(0x0478, 0x0210, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_ECSPI2_SS0_GPIO5_IO13                              =  IOMUX_PAD(0x0478, 0x0210, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_I2C1_SCL_I2C1_SCL                                  =  IOMUX_PAD(0x047C, 0x0214, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C1_SCL_ENET1_MDC                                 =  IOMUX_PAD(0x047C, 0x0214, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C1_SCL_GPIO5_IO14                                =  IOMUX_PAD(0x047C, 0x0214, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_I2C1_SDA_I2C1_SDA                                  =  IOMUX_PAD(0x0480, 0x0218, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C1_SDA_ENET1_MDIO                                =  IOMUX_PAD(0x0480, 0x0218, 1, 0x04C0, 2, 0),
+	IMX8MM_PAD_I2C1_SDA_GPIO5_IO15                                =  IOMUX_PAD(0x0480, 0x0218, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_I2C2_SCL_I2C2_SCL                                  =  IOMUX_PAD(0x0484, 0x021C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C2_SCL_ENET1_1588_EVENT1_IN                      =  IOMUX_PAD(0x0484, 0x021C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C2_SCL_USDHC3_CD_B                               =  IOMUX_PAD(0x0484, 0x021C, 2, 0x0544, 1, 0),
+	IMX8MM_PAD_I2C2_SCL_GPIO5_IO16                                =  IOMUX_PAD(0x0484, 0x021C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_I2C2_SDA_I2C2_SDA                                  =  IOMUX_PAD(0x0488, 0x0220, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C2_SDA_ENET1_1588_EVENT1_OUT                     =  IOMUX_PAD(0x0488, 0x0220, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C2_SDA_USDHC3_WP                                 =  IOMUX_PAD(0x0488, 0x0220, 2, 0x0548, 1, 0),
+	IMX8MM_PAD_I2C2_SDA_GPIO5_IO17                                =  IOMUX_PAD(0x0488, 0x0220, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_I2C3_SCL_I2C3_SCL                                  =  IOMUX_PAD(0x048C, 0x0224, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C3_SCL_PWM4_OUT                                  =  IOMUX_PAD(0x048C, 0x0224, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C3_SCL_GPT2_CLK                                  =  IOMUX_PAD(0x048C, 0x0224, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C3_SCL_GPIO5_IO18                                =  IOMUX_PAD(0x048C, 0x0224, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_I2C3_SDA_I2C3_SDA                                  =  IOMUX_PAD(0x0490, 0x0228, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C3_SDA_PWM3_OUT                                  =  IOMUX_PAD(0x0490, 0x0228, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C3_SDA_GPT3_CLK                                  =  IOMUX_PAD(0x0490, 0x0228, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C3_SDA_GPIO5_IO19                                =  IOMUX_PAD(0x0490, 0x0228, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_I2C4_SCL_I2C4_SCL                                  =  IOMUX_PAD(0x0494, 0x022C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C4_SCL_PWM2_OUT                                  =  IOMUX_PAD(0x0494, 0x022C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C4_SCL_PCIE1_CLKREQ_B                            =  IOMUX_PAD(0x0494, 0x022C, 2, 0x0524, 0, 0),
+	IMX8MM_PAD_I2C4_SCL_GPIO5_IO20                                =  IOMUX_PAD(0x0494, 0x022C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_I2C4_SDA_I2C4_SDA                                  =  IOMUX_PAD(0x0498, 0x0230, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C4_SDA_PWM1_OUT                                  =  IOMUX_PAD(0x0498, 0x0230, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_I2C4_SDA_GPIO5_IO21                                =  IOMUX_PAD(0x0498, 0x0230, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_UART1_RXD_UART1_RX                                 =  IOMUX_PAD(0x049C, 0x0234, 0, 0x04F4, 0, 0),
+	IMX8MM_PAD_UART1_RXD_UART1_TX                                 =  IOMUX_PAD(0x049C, 0x0234, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_UART1_RXD_ECSPI3_SCLK                              =  IOMUX_PAD(0x049C, 0x0234, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_UART1_RXD_GPIO5_IO22                               =  IOMUX_PAD(0x049C, 0x0234, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_UART1_TXD_UART1_TX                                 =  IOMUX_PAD(0x04A0, 0x0238, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_UART1_TXD_UART1_RX                                 =  IOMUX_PAD(0x04A0, 0x0238, 0, 0x04F4, 1, 0),
+	IMX8MM_PAD_UART1_TXD_ECSPI3_MOSI                              =  IOMUX_PAD(0x04A0, 0x0238, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_UART1_TXD_GPIO5_IO23                               =  IOMUX_PAD(0x04A0, 0x0238, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_UART2_RXD_UART2_RX                                 =  IOMUX_PAD(0x04A4, 0x023C, 0, 0x04FC, 0, 0),
+	IMX8MM_PAD_UART2_RXD_UART2_TX                                 =  IOMUX_PAD(0x04A4, 0x023C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_UART2_RXD_ECSPI3_MISO                              =  IOMUX_PAD(0x04A4, 0x023C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_UART2_RXD_GPIO5_IO24                               =  IOMUX_PAD(0x04A4, 0x023C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_UART2_TXD_UART2_TX                                 =  IOMUX_PAD(0x04A8, 0x0240, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_UART2_TXD_UART2_RX                                 =  IOMUX_PAD(0x04A8, 0x0240, 0, 0x04FC, 1, 0),
+	IMX8MM_PAD_UART2_TXD_ECSPI3_SS0                               =  IOMUX_PAD(0x04A8, 0x0240, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_UART2_TXD_GPIO5_IO25                               =  IOMUX_PAD(0x04A8, 0x0240, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_UART3_RXD_UART3_RX                                 =  IOMUX_PAD(0x04AC, 0x0244, 0, 0x0504, 2, 0),
+	IMX8MM_PAD_UART3_RXD_UART3_TX                                 =  IOMUX_PAD(0x04AC, 0x0244, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_UART3_RXD_UART1_CTS_B                              =  IOMUX_PAD(0x04AC, 0x0244, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_UART3_RXD_UART1_RTS_B                              =  IOMUX_PAD(0x04AC, 0x0244, 1, 0x04F0, 0, 0),
+	IMX8MM_PAD_UART3_RXD_USDHC3_RESET_B                           =  IOMUX_PAD(0x04AC, 0x0244, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_UART3_RXD_GPIO5_IO26                               =  IOMUX_PAD(0x04AC, 0x0244, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_UART3_TXD_UART3_TX                                 =  IOMUX_PAD(0x04B0, 0x0248, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_UART3_TXD_UART3_RX                                 =  IOMUX_PAD(0x04B0, 0x0248, 0, 0x0504, 3, 0),
+	IMX8MM_PAD_UART3_TXD_UART1_RTS_B                              =  IOMUX_PAD(0x04B0, 0x0248, 1, 0x04F0, 1, 0),
+	IMX8MM_PAD_UART3_TXD_UART1_CTS_B                              =  IOMUX_PAD(0x04B0, 0x0248, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_UART3_TXD_USDHC3_VSELECT                           =  IOMUX_PAD(0x04B0, 0x0248, 2, 0x0000, 0, 0),
+	IMX8MM_PAD_UART3_TXD_GPIO5_IO27                               =  IOMUX_PAD(0x04B0, 0x0248, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_UART4_RXD_UART4_RX                                 =  IOMUX_PAD(0x04B4, 0x024C, 0, 0x050C, 2, 0),
+	IMX8MM_PAD_UART4_RXD_UART4_TX                                 =  IOMUX_PAD(0x04B4, 0x024C, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_UART4_RXD_UART2_CTS_B                              =  IOMUX_PAD(0x04B4, 0x024C, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_UART4_RXD_UART2_RTS_B                              =  IOMUX_PAD(0x04B4, 0x024C, 1, 0x04F8, 0, 0),
+	IMX8MM_PAD_UART4_RXD_PCIE1_CLKREQ_B                           =  IOMUX_PAD(0x04B4, 0x024C, 2, 0x0524, 1, 0),
+	IMX8MM_PAD_UART4_RXD_GPIO5_IO28                               =  IOMUX_PAD(0x04B4, 0x024C, 5, 0x0000, 0, 0),
+
+	IMX8MM_PAD_UART4_TXD_UART4_TX                                 =  IOMUX_PAD(0x04B8, 0x0250, 0, 0x0000, 0, 0),
+	IMX8MM_PAD_UART4_TXD_UART4_RX                                 =  IOMUX_PAD(0x04B8, 0x0250, 0, 0x050C, 3, 0),
+	IMX8MM_PAD_UART4_TXD_UART2_RTS_B                              =  IOMUX_PAD(0x04B8, 0x0250, 1, 0x04F8, 1, 0),
+	IMX8MM_PAD_UART4_TXD_UART2_CTS_B                              =  IOMUX_PAD(0x04B8, 0x0250, 1, 0x0000, 0, 0),
+	IMX8MM_PAD_UART4_TXD_GPIO5_IO29                               =  IOMUX_PAD(0x04B8, 0x0250, 5, 0x0000, 0, 0),
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mn_pins.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mn_pins.h
new file mode 100644
index 000000000..b4298f2b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mn_pins.h
@@ -0,0 +1,763 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8MN_PINS_H__
+#define __ASM_ARCH_IMX8MN_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+	IMX8MN_PAD_BOOT_MODE2__CCMSRCGPCMIX_BOOT_MODE2                          = IOMUX_PAD(0x025C, 0x0020, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_BOOT_MODE2__I2C1_SCL                                         = IOMUX_PAD(0x025C, 0x0020, 1, 0x055C, 3, 0),
+
+	IMX8MN_PAD_BOOT_MODE3__CCMSRCGPCMIX_BOOT_MODE3                          = IOMUX_PAD(0x0260, 0x0024, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_BOOT_MODE3__I2C1_SDA                                         = IOMUX_PAD(0x0260, 0x0024, 1, 0x056C, 3, 0),
+
+	IMX8MN_PAD_GPIO1_IO00__GPIO1_IO0                                        = IOMUX_PAD(0x0290, 0x0028, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO00__CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT               = IOMUX_PAD(0x0290, 0x0028, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO00__ANAMIX_REF_CLK_32K                               = IOMUX_PAD(0x0290, 0x0028, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO00__CCMSRCGPCMIX_EXT_CLK1                            = IOMUX_PAD(0x0290, 0x0028, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO01__GPIO1_IO1                                        = IOMUX_PAD(0x0294, 0x002C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO01__PWM1_OUT                                         = IOMUX_PAD(0x0294, 0x002C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO01__ANAMIX_REF_CLK_24M                               = IOMUX_PAD(0x0294, 0x002C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO01__CCMSRCGPCMIX_EXT_CLK2                            = IOMUX_PAD(0x0294, 0x002C, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO02__GPIO1_IO2                                        = IOMUX_PAD(0x0298, 0x0030, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B                                     = IOMUX_PAD(0x0298, 0x0030, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_ANY                                   = IOMUX_PAD(0x0298, 0x0030, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO03__GPIO1_IO3                                        = IOMUX_PAD(0x029C, 0x0034, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO03__USDHC1_VSELECT                                   = IOMUX_PAD(0x029C, 0x0034, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO03__SDMA1_EXT_EVENT0                                 = IOMUX_PAD(0x029C, 0x0034, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO03__ANAMIX_XTAL_OK                                   = IOMUX_PAD(0x029C, 0x0034, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO04__GPIO1_IO4                                        = IOMUX_PAD(0x02A0, 0x0038, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO04__USDHC2_VSELECT                                   = IOMUX_PAD(0x02A0, 0x0038, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO04__SDMA1_EXT_EVENT1                                 = IOMUX_PAD(0x02A0, 0x0038, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO04__ANAMIX_XTAL_OK_LV                                = IOMUX_PAD(0x02A0, 0x0038, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO05__GPIO1_IO5                                        = IOMUX_PAD(0x02A4, 0x003C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO05__M4_NMI                                           = IOMUX_PAD(0x02A4, 0x003C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO05__CCMSRCGPCMIX_PMIC_READY                          = IOMUX_PAD(0x02A4, 0x003C, 5, 0x04BC, 0, 0),
+	IMX8MN_PAD_GPIO1_IO05__CCMSRCGPCMIX_INT_BOOT                            = IOMUX_PAD(0x02A4, 0x003C, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO06__GPIO1_IO6                                        = IOMUX_PAD(0x02A8, 0x0040, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO06__ENET1_MDC                                        = IOMUX_PAD(0x02A8, 0x0040, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO06__USDHC1_CD_B                                      = IOMUX_PAD(0x02A8, 0x0040, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO06__CCMSRCGPCMIX_EXT_CLK3                            = IOMUX_PAD(0x02A8, 0x0040, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO07__GPIO1_IO7                                        = IOMUX_PAD(0x02AC, 0x0044, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO07__ENET1_MDIO                                       = IOMUX_PAD(0x02AC, 0x0044, 1, 0x04C0, 0, 0),
+	IMX8MN_PAD_GPIO1_IO07__USDHC1_WP                                        = IOMUX_PAD(0x02AC, 0x0044, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO07__CCMSRCGPCMIX_EXT_CLK4                            = IOMUX_PAD(0x02AC, 0x0044, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO08__GPIO1_IO8                                        = IOMUX_PAD(0x02B0, 0x0048, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO08__ENET1_1588_EVENT0_IN                             = IOMUX_PAD(0x02B0, 0x0048, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO08__PWM1_OUT                                         = IOMUX_PAD(0x02B0, 0x0048, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO08__USDHC2_RESET_B                                   = IOMUX_PAD(0x02B0, 0x0048, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO08__CCMSRCGPCMIX_WAIT                                = IOMUX_PAD(0x02B0, 0x0048, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO09__GPIO1_IO9                                        = IOMUX_PAD(0x02B4, 0x004C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO09__ENET1_1588_EVENT0_OUT                            = IOMUX_PAD(0x02B4, 0x004C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO09__PWM2_OUT                                         = IOMUX_PAD(0x02B4, 0x004C, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO09__USDHC3_RESET_B                                   = IOMUX_PAD(0x02B4, 0x004C, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO09__SDMA2_EXT_EVENT0                                 = IOMUX_PAD(0x02B4, 0x004C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO09__CCMSRCGPCMIX_STOP                                = IOMUX_PAD(0x02B4, 0x004C, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO10__GPIO1_IO10                                       = IOMUX_PAD(0x02B8, 0x0050, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO10__USB1_OTG_ID                                      = IOMUX_PAD(0x02B8, 0x0050, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO10__PWM3_OUT                                         = IOMUX_PAD(0x02B8, 0x0050, 2, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO11__GPIO1_IO11                                       = IOMUX_PAD(0x02BC, 0x0054, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO11__PWM2_OUT                                         = IOMUX_PAD(0x02BC, 0x0054, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO11__USDHC3_VSELECT                                   = IOMUX_PAD(0x02BC, 0x0054, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO11__CCMSRCGPCMIX_PMIC_READY                          = IOMUX_PAD(0x02BC, 0x0054, 5, 0x04BC, 1, 0),
+	IMX8MN_PAD_GPIO1_IO11__CCMSRCGPCMIX_OUT0                                = IOMUX_PAD(0x02BC, 0x0054, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO12__GPIO1_IO12                                       = IOMUX_PAD(0x02C0, 0x0058, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO12__USB1_OTG_PWR                                     = IOMUX_PAD(0x02C0, 0x0058, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO12__SDMA2_EXT_EVENT1                                 = IOMUX_PAD(0x02C0, 0x0058, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO12__CCMSRCGPCMIX_OUT1                                = IOMUX_PAD(0x02C0, 0x0058, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO13__GPIO1_IO13                                       = IOMUX_PAD(0x02C4, 0x005C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO13__USB1_OTG_OC                                      = IOMUX_PAD(0x02C4, 0x005C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO13__PWM2_OUT                                         = IOMUX_PAD(0x02C4, 0x005C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO13__CCMSRCGPCMIX_OUT2                                = IOMUX_PAD(0x02C4, 0x005C, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO14__GPIO1_IO14                                       = IOMUX_PAD(0x02C8, 0x0060, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO14__USDHC3_CD_B                                      = IOMUX_PAD(0x02C8, 0x0060, 4, 0x0598, 2, 0),
+	IMX8MN_PAD_GPIO1_IO14__PWM3_OUT                                         = IOMUX_PAD(0x02C8, 0x0060, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO14__CCMSRCGPCMIX_CLKO1                               = IOMUX_PAD(0x02C8, 0x0060, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_GPIO1_IO15__GPIO1_IO15                                       = IOMUX_PAD(0x02CC, 0x0064, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO15__USDHC3_WP                                        = IOMUX_PAD(0x02CC, 0x0064, 4, 0x05B8, 2, 0),
+	IMX8MN_PAD_GPIO1_IO15__PWM4_OUT                                         = IOMUX_PAD(0x02CC, 0x0064, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_GPIO1_IO15__CCMSRCGPCMIX_CLKO2                               = IOMUX_PAD(0x02CC, 0x0064, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ENET_MDC__ENET1_MDC                                          = IOMUX_PAD(0x02D0, 0x0068, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_MDC__SAI6_TX_DATA0                                      = IOMUX_PAD(0x02D0, 0x0068, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_MDC__PDM_BIT_STREAM3                                    = IOMUX_PAD(0x02D0, 0x0068, 3, 0x0540, 1, 0),
+	IMX8MN_PAD_ENET_MDC__SPDIF1_OUT                                         = IOMUX_PAD(0x02D0, 0x0068, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_MDC__GPIO1_IO16                                         = IOMUX_PAD(0x02D0, 0x0068, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_MDC__USDHC3_STROBE                                      = IOMUX_PAD(0x02D0, 0x0068, 6, 0x059C, 1, 0),
+
+	IMX8MN_PAD_ENET_MDIO__ENET1_MDIO                                        = IOMUX_PAD(0x02D4, 0x006C, 0, 0x04C0, 1, 0),
+	IMX8MN_PAD_ENET_MDIO__SAI6_TX_SYNC                                      = IOMUX_PAD(0x02D4, 0x006C, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_MDIO__PDM_BIT_STREAM2                                   = IOMUX_PAD(0x02D4, 0x006C, 3, 0x053C, 1, 0),
+	IMX8MN_PAD_ENET_MDIO__SPDIF1_IN                                         = IOMUX_PAD(0x02D4, 0x006C, 4, 0x05CC, 1, 0),
+	IMX8MN_PAD_ENET_MDIO__GPIO1_IO17                                        = IOMUX_PAD(0x02D4, 0x006C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_MDIO__USDHC3_DATA5                                      = IOMUX_PAD(0x02D4, 0x006C, 6, 0x0550, 1, 0),
+
+	IMX8MN_PAD_ENET_TD3__ENET1_RGMII_TD3                                    = IOMUX_PAD(0x02D8, 0x0070, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD3__SAI6_TX_BCLK                                       = IOMUX_PAD(0x02D8, 0x0070, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD3__PDM_BIT_STREAM1                                    = IOMUX_PAD(0x02D8, 0x0070, 3, 0x0538, 1, 0),
+	IMX8MN_PAD_ENET_TD3__SPDIF1_EXT_CLK                                     = IOMUX_PAD(0x02D8, 0x0070, 4, 0x0568, 1, 0),
+	IMX8MN_PAD_ENET_TD3__GPIO1_IO18                                         = IOMUX_PAD(0x02D8, 0x0070, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD3__USDHC3_DATA6                                       = IOMUX_PAD(0x02D8, 0x0070, 6, 0x0584, 1, 0),
+
+	IMX8MN_PAD_ENET_TD2__ENET1_RGMII_TD2                                    = IOMUX_PAD(0x02DC, 0x0074, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD2__ENET1_TX_CLK                                       = IOMUX_PAD(0x02DC, 0x0074, 1, 0x05A4, 0, 0),
+	IMX8MN_PAD_ENET_TD2__CCMSRCGPCMIX_ENET_REF_CLK_ROOT                     = IOMUX_PAD(0x02DC, 0x0074, 1, 0x05A4, 0, 0),
+	IMX8MN_PAD_ENET_TD2__SAI6_RX_DATA0                                      = IOMUX_PAD(0x02DC, 0x0074, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD2__PDM_BIT_STREAM3                                    = IOMUX_PAD(0x02DC, 0x0074, 3, 0x0540, 2, 0),
+	IMX8MN_PAD_ENET_TD2__GPIO1_IO19                                         = IOMUX_PAD(0x02DC, 0x0074, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD2__USDHC3_DATA7                                       = IOMUX_PAD(0x02DC, 0x0074, 6, 0x054C, 1, 0),
+
+	IMX8MN_PAD_ENET_TD1__ENET1_RGMII_TD1                                    = IOMUX_PAD(0x02E0, 0x0078, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD1__SAI6_RX_SYNC                                       = IOMUX_PAD(0x02E0, 0x0078, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD1__PDM_BIT_STREAM2                                    = IOMUX_PAD(0x02E0, 0x0078, 3, 0x053C, 2, 0),
+	IMX8MN_PAD_ENET_TD1__GPIO1_IO20                                         = IOMUX_PAD(0x02E0, 0x0078, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD1__USDHC3_CD_B                                        = IOMUX_PAD(0x02E0, 0x0078, 6, 0x0598, 3, 0),
+
+	IMX8MN_PAD_ENET_TD0__ENET1_RGMII_TD0                                    = IOMUX_PAD(0x02E4, 0x007C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD0__SAI6_RX_BCLK                                       = IOMUX_PAD(0x02E4, 0x007C, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD0__PDM_BIT_STREAM1                                    = IOMUX_PAD(0x02E4, 0x007C, 3, 0x0538, 2, 0),
+	IMX8MN_PAD_ENET_TD0__GPIO1_IO21                                         = IOMUX_PAD(0x02E4, 0x007C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TD0__USDHC3_WP                                          = IOMUX_PAD(0x02E4, 0x007C, 6, 0x05B8, 3, 0),
+
+	IMX8MN_PAD_ENET_TX_CTL__ENET1_RGMII_TX_CTL                              = IOMUX_PAD(0x02E8, 0x0080, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TX_CTL__SAI6_MCLK                                       = IOMUX_PAD(0x02E8, 0x0080, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TX_CTL__GPIO1_IO22                                      = IOMUX_PAD(0x02E8, 0x0080, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TX_CTL__USDHC3_DATA0                                    = IOMUX_PAD(0x02E8, 0x0080, 6, 0x05B4, 1, 0),
+
+	IMX8MN_PAD_ENET_TXC__ENET1_RGMII_TXC                                    = IOMUX_PAD(0x02EC, 0x0084, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TXC__ENET1_TX_ER                                        = IOMUX_PAD(0x02EC, 0x0084, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TXC__SAI7_TX_DATA0                                      = IOMUX_PAD(0x02EC, 0x0084, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TXC__GPIO1_IO23                                         = IOMUX_PAD(0x02EC, 0x0084, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_TXC__USDHC3_DATA1                                       = IOMUX_PAD(0x02EC, 0x0084, 6, 0x05B0, 1, 0),
+
+	IMX8MN_PAD_ENET_RX_CTL__ENET1_RGMII_RX_CTL                              = IOMUX_PAD(0x02F0, 0x0088, 0, 0x0574, 0, 0),
+	IMX8MN_PAD_ENET_RX_CTL__SAI7_TX_SYNC                                    = IOMUX_PAD(0x02F0, 0x0088, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RX_CTL__PDM_BIT_STREAM3                                 = IOMUX_PAD(0x02F0, 0x0088, 3, 0x0540, 3, 0),
+	IMX8MN_PAD_ENET_RX_CTL__GPIO1_IO24                                      = IOMUX_PAD(0x02F0, 0x0088, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RX_CTL__USDHC3_DATA2                                    = IOMUX_PAD(0x02F0, 0x0088, 6, 0x05E4, 1, 0),
+
+	IMX8MN_PAD_ENET_RXC__ENET1_RGMII_RXC                                    = IOMUX_PAD(0x02F4, 0x008C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RXC__ENET1_RX_ER                                        = IOMUX_PAD(0x02F4, 0x008C, 1, 0x05C8, 0, 0),
+	IMX8MN_PAD_ENET_RXC__SAI7_TX_BCLK                                       = IOMUX_PAD(0x02F4, 0x008C, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RXC__PDM_BIT_STREAM2                                    = IOMUX_PAD(0x02F4, 0x008C, 3, 0x053C, 3, 0),
+	IMX8MN_PAD_ENET_RXC__GPIO1_IO25                                         = IOMUX_PAD(0x02F4, 0x008C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RXC__USDHC3_DATA3                                       = IOMUX_PAD(0x02F4, 0x008C, 6, 0x05E0, 1, 0),
+
+	IMX8MN_PAD_ENET_RD0__ENET1_RGMII_RD0                                    = IOMUX_PAD(0x02F8, 0x0090, 0, 0x057C, 0, 0),
+	IMX8MN_PAD_ENET_RD0__SAI7_RX_DATA0                                      = IOMUX_PAD(0x02F8, 0x0090, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD0__PDM_BIT_STREAM1                                    = IOMUX_PAD(0x02F8, 0x0090, 3, 0x0538, 3, 0),
+	IMX8MN_PAD_ENET_RD0__GPIO1_IO26                                         = IOMUX_PAD(0x02F8, 0x0090, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD0__USDHC3_DATA4                                       = IOMUX_PAD(0x02F8, 0x0090, 6, 0x0558, 1, 0),
+
+	IMX8MN_PAD_ENET_RD1__ENET1_RGMII_RD1                                    = IOMUX_PAD(0x02FC, 0x0094, 0, 0x0554, 0, 0),
+	IMX8MN_PAD_ENET_RD1__SAI7_RX_SYNC                                       = IOMUX_PAD(0x02FC, 0x0094, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD1__PDM_BIT_STREAM0                                    = IOMUX_PAD(0x02FC, 0x0094, 3, 0x0534, 1, 0),
+	IMX8MN_PAD_ENET_RD1__GPIO1_IO27                                         = IOMUX_PAD(0x02FC, 0x0094, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD1__USDHC3_RESET_B                                     = IOMUX_PAD(0x02FC, 0x0094, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ENET_RD2__ENET1_RGMII_RD2                                    = IOMUX_PAD(0x0300, 0x0098, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD2__SAI7_RX_BCLK                                       = IOMUX_PAD(0x0300, 0x0098, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD2__PDM_CLK                                            = IOMUX_PAD(0x0300, 0x0098, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD2__GPIO1_IO28                                         = IOMUX_PAD(0x0300, 0x0098, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD2__USDHC3_CLK                                         = IOMUX_PAD(0x0300, 0x0098, 6, 0x05A0, 1, 0),
+
+	IMX8MN_PAD_ENET_RD3__ENET1_RGMII_RD3                                    = IOMUX_PAD(0x0304, 0x009C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD3__SAI7_MCLK                                          = IOMUX_PAD(0x0304, 0x009C, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD3__SPDIF1_IN                                          = IOMUX_PAD(0x0304, 0x009C, 3, 0x05CC, 5, 0),
+	IMX8MN_PAD_ENET_RD3__GPIO1_IO29                                         = IOMUX_PAD(0x0304, 0x009C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_ENET_RD3__USDHC3_CMD                                         = IOMUX_PAD(0x0304, 0x009C, 6, 0x05DC, 1, 0),
+
+	IMX8MN_PAD_SD1_CLK__USDHC1_CLK                                          = IOMUX_PAD(0x0308, 0x00A0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_CLK__ENET1_MDC                                           = IOMUX_PAD(0x0308, 0x00A0, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_CLK__UART1_DCE_TX                                        = IOMUX_PAD(0x0308, 0x00A0, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_CLK__UART1_DTE_RX                                        = IOMUX_PAD(0x0308, 0x00A0, 4, 0x04F4, 4, 0),
+	IMX8MN_PAD_SD1_CLK__GPIO2_IO0                                           = IOMUX_PAD(0x0308, 0x00A0, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_CMD__USDHC1_CMD                                          = IOMUX_PAD(0x030C, 0x00A4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_CMD__ENET1_MDIO                                          = IOMUX_PAD(0x030C, 0x00A4, 1, 0x04C0, 3, 0),
+	IMX8MN_PAD_SD1_CMD__UART1_DCE_RX                                        = IOMUX_PAD(0x030C, 0x00A4, 4, 0x04F4, 5, 0),
+	IMX8MN_PAD_SD1_CMD__UART1_DTE_TX                                        = IOMUX_PAD(0x030C, 0x00A4, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_CMD__GPIO2_IO1                                           = IOMUX_PAD(0x030C, 0x00A4, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_DATA0__USDHC1_DATA0                                      = IOMUX_PAD(0x0310, 0x00A8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA0__ENET1_RGMII_TD1                                   = IOMUX_PAD(0x0310, 0x00A8, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA0__UART1_DCE_RTS_B                                   = IOMUX_PAD(0x0310, 0x00A8, 4, 0x04F0, 4, 0),
+	IMX8MN_PAD_SD1_DATA0__UART1_DTE_CTS_B                                   = IOMUX_PAD(0x0310, 0x00A8, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA0__GPIO2_IO2                                         = IOMUX_PAD(0x0310, 0x00A8, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_DATA1__USDHC1_DATA1                                      = IOMUX_PAD(0x0314, 0x00AC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA1__ENET1_RGMII_TD0                                   = IOMUX_PAD(0x0314, 0x00AC, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA1__UART1_DCE_CTS_B                                   = IOMUX_PAD(0x0314, 0x00AC, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA1__UART1_DTE_RTS_B                                   = IOMUX_PAD(0x0314, 0x00AC, 4, 0x04F0, 5, 0),
+	IMX8MN_PAD_SD1_DATA1__GPIO2_IO3                                         = IOMUX_PAD(0x0314, 0x00AC, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_DATA2__USDHC1_DATA2                                      = IOMUX_PAD(0x0318, 0x00B0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA2__ENET1_RGMII_RD0                                   = IOMUX_PAD(0x0318, 0x00B0, 1, 0x057C, 1, 0),
+	IMX8MN_PAD_SD1_DATA2__UART2_DCE_TX                                      = IOMUX_PAD(0x0318, 0x00B0, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA2__UART2_DTE_RX                                      = IOMUX_PAD(0x0318, 0x00B0, 4, 0x04FC, 4, 0),
+	IMX8MN_PAD_SD1_DATA2__GPIO2_IO4                                         = IOMUX_PAD(0x0318, 0x00B0, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_DATA3__USDHC1_DATA3                                      = IOMUX_PAD(0x031C, 0x00B4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA3__ENET1_RGMII_RD1                                   = IOMUX_PAD(0x031C, 0x00B4, 1, 0x0554, 1, 0),
+	IMX8MN_PAD_SD1_DATA3__UART2_DCE_RX                                      = IOMUX_PAD(0x031C, 0x00B4, 4, 0x04FC, 5, 0),
+	IMX8MN_PAD_SD1_DATA3__UART2_DTE_TX                                      = IOMUX_PAD(0x031C, 0x00B4, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA3__GPIO2_IO5                                         = IOMUX_PAD(0x031C, 0x00B4, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_DATA4__USDHC1_DATA4                                      = IOMUX_PAD(0x0320, 0x00B8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA4__ENET1_RGMII_TX_CTL                                = IOMUX_PAD(0x0320, 0x00B8, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA4__I2C1_SCL                                          = IOMUX_PAD(0x0320, 0x00B8, 3, 0x055C, 1, 0),
+	IMX8MN_PAD_SD1_DATA4__UART2_DCE_RTS_B                                   = IOMUX_PAD(0x0320, 0x00B8, 4, 0x04F8, 4, 0),
+	IMX8MN_PAD_SD1_DATA4__UART2_DTE_CTS_B                                   = IOMUX_PAD(0x0320, 0x00B8, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA4__GPIO2_IO6                                         = IOMUX_PAD(0x0320, 0x00B8, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_DATA5__USDHC1_DATA5                                      = IOMUX_PAD(0x0324, 0x00BC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA5__ENET1_TX_ER                                       = IOMUX_PAD(0x0324, 0x00BC, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA5__I2C1_SDA                                          = IOMUX_PAD(0x0324, 0x00BC, 3, 0x056C, 1, 0),
+	IMX8MN_PAD_SD1_DATA5__UART2_DCE_CTS_B                                   = IOMUX_PAD(0x0324, 0x00BC, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA5__UART2_DTE_RTS_B                                   = IOMUX_PAD(0x0324, 0x00BC, 4, 0x04F8, 5, 0),
+	IMX8MN_PAD_SD1_DATA5__GPIO2_IO7                                         = IOMUX_PAD(0x0324, 0x00BC, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_DATA6__USDHC1_DATA6                                      = IOMUX_PAD(0x0328, 0x00C0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA6__ENET1_RGMII_RX_CTL                                = IOMUX_PAD(0x0328, 0x00C0, 1, 0x0574, 1, 0),
+	IMX8MN_PAD_SD1_DATA6__I2C2_SCL                                          = IOMUX_PAD(0x0328, 0x00C0, 3, 0x05D0, 1, 0),
+	IMX8MN_PAD_SD1_DATA6__UART3_DCE_TX                                      = IOMUX_PAD(0x0328, 0x00C0, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA6__UART3_DTE_RX                                      = IOMUX_PAD(0x0328, 0x00C0, 4, 0x0504, 4, 0),
+	IMX8MN_PAD_SD1_DATA6__GPIO2_IO8                                         = IOMUX_PAD(0x0328, 0x00C0, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_DATA7__USDHC1_DATA7                                      = IOMUX_PAD(0x032C, 0x00C4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA7__ENET1_RX_ER                                       = IOMUX_PAD(0x032C, 0x00C4, 1, 0x05C8, 1, 0),
+	IMX8MN_PAD_SD1_DATA7__I2C2_SDA                                          = IOMUX_PAD(0x032C, 0x00C4, 3, 0x0560, 1, 0),
+	IMX8MN_PAD_SD1_DATA7__UART3_DCE_RX                                      = IOMUX_PAD(0x032C, 0x00C4, 4, 0x0504, 5, 0),
+	IMX8MN_PAD_SD1_DATA7__UART3_DTE_TX                                      = IOMUX_PAD(0x032C, 0x00C4, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_DATA7__GPIO2_IO9                                         = IOMUX_PAD(0x032C, 0x00C4, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_RESET_B__USDHC1_RESET_B                                  = IOMUX_PAD(0x0330, 0x00C8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_RESET_B__ENET1_TX_CLK                              = IOMUX_PAD(0x0330, 0x00C8, 1, 0x05A4, 1, 0),
+	IMX8MN_PAD_SD1_RESET_B__CCMSRCGPCMIX_ENET_REF_CLK_ROOT                  = IOMUX_PAD(0x0330, 0x00C8, 1, 0x05A4, 0, 0),
+	IMX8MN_PAD_SD1_RESET_B__I2C3_SCL                                        = IOMUX_PAD(0x0330, 0x00C8, 3, 0x0588, 1, 0),
+	IMX8MN_PAD_SD1_RESET_B__UART3_DCE_RTS_B                                 = IOMUX_PAD(0x0330, 0x00C8, 4, 0x0500, 2, 0),
+	IMX8MN_PAD_SD1_RESET_B__UART3_DTE_CTS_B                                 = IOMUX_PAD(0x0330, 0x00C8, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_RESET_B__GPIO2_IO10                                      = IOMUX_PAD(0x0330, 0x00C8, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD1_STROBE__USDHC1_STROBE                                    = IOMUX_PAD(0x0334, 0x00CC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_STROBE__I2C3_SDA                                         = IOMUX_PAD(0x0334, 0x00CC, 3, 0x05BC, 1, 0),
+	IMX8MN_PAD_SD1_STROBE__UART3_DCE_CTS_B                                  = IOMUX_PAD(0x0334, 0x00CC, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD1_STROBE__UART3_DTE_RTS_B                                  = IOMUX_PAD(0x0334, 0x00CC, 4, 0x0500, 3, 0),
+	IMX8MN_PAD_SD1_STROBE__GPIO2_IO11                                       = IOMUX_PAD(0x0334, 0x00CC, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_CD_B__USDHC2_CD_B                                        = IOMUX_PAD(0x0338, 0x00D0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CD_B__GPIO2_IO12                                         = IOMUX_PAD(0x0338, 0x00D0, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CD_B__CCMSRCGPCMIX_TESTER_ACK                            = IOMUX_PAD(0x0338, 0x00D0, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_CLK__USDHC2_CLK                                          = IOMUX_PAD(0x033C, 0x00D4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CLK__SAI5_RX_SYNC                                        = IOMUX_PAD(0x033C, 0x00D4, 1, 0x04E4, 1, 0),
+	IMX8MN_PAD_SD2_CLK__ECSPI2_SCLK                                         = IOMUX_PAD(0x033C, 0x00D4, 2, 0x0580, 1, 0),
+	IMX8MN_PAD_SD2_CLK__UART4_DCE_RX                                        = IOMUX_PAD(0x033C, 0x00D4, 3, 0x050C, 4, 0),
+	IMX8MN_PAD_SD2_CLK__UART4_DTE_TX                                        = IOMUX_PAD(0x033C, 0x00D4, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CLK__SAI5_MCLK                                           = IOMUX_PAD(0x033C, 0x00D4, 4, 0x0594, 1, 0),
+	IMX8MN_PAD_SD2_CLK__GPIO2_IO13                                          = IOMUX_PAD(0x033C, 0x00D4, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                               = IOMUX_PAD(0x033C, 0x00D4, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_CMD__USDHC2_CMD                                          = IOMUX_PAD(0x0340, 0x00D8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CMD__SAI5_RX_BCLK                                        = IOMUX_PAD(0x0340, 0x00D8, 1, 0x04D0, 1, 0),
+	IMX8MN_PAD_SD2_CMD__ECSPI2_MOSI                                         = IOMUX_PAD(0x0340, 0x00D8, 2, 0x0590, 1, 0),
+	IMX8MN_PAD_SD2_CMD__UART4_DCE_TX                                        = IOMUX_PAD(0x0340, 0x00D8, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CMD__UART4_DTE_RX                                        = IOMUX_PAD(0x0340, 0x00D8, 3, 0x050C, 5, 0),
+	IMX8MN_PAD_SD2_CMD__PDM_CLK                                             = IOMUX_PAD(0x0340, 0x00D8, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CMD__GPIO2_IO14                                          = IOMUX_PAD(0x0340, 0x00D8, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                               = IOMUX_PAD(0x0340, 0x00D8, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_DATA0__USDHC2_DATA0                                      = IOMUX_PAD(0x0344, 0x00DC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA0__SAI5_RX_DATA0                                     = IOMUX_PAD(0x0344, 0x00DC, 1, 0x04D4, 1, 0),
+	IMX8MN_PAD_SD2_DATA0__I2C4_SDA                                          = IOMUX_PAD(0x0344, 0x00DC, 2, 0x058C, 1, 0),
+	IMX8MN_PAD_SD2_DATA0__UART2_DCE_RX                                      = IOMUX_PAD(0x0344, 0x00DC, 3, 0x04FC, 6, 0),
+	IMX8MN_PAD_SD2_DATA0__UART2_DTE_TX                                      = IOMUX_PAD(0x0344, 0x00DC, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA0__PDM_BIT_STREAM0                                   = IOMUX_PAD(0x0344, 0x00DC, 4, 0x0534, 2, 0),
+	IMX8MN_PAD_SD2_DATA0__GPIO2_IO15                                        = IOMUX_PAD(0x0344, 0x00DC, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                             = IOMUX_PAD(0x0344, 0x00DC, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_DATA1__USDHC2_DATA1                                      = IOMUX_PAD(0x0348, 0x00E0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA1__SAI5_TX_SYNC                                      = IOMUX_PAD(0x0348, 0x00E0, 1, 0x04EC, 1, 0),
+	IMX8MN_PAD_SD2_DATA1__I2C4_SCL                                          = IOMUX_PAD(0x0348, 0x00E0, 2, 0x05D4, 1, 0),
+	IMX8MN_PAD_SD2_DATA1__UART2_DCE_TX                                      = IOMUX_PAD(0x0348, 0x00E0, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA1__UART2_DTE_RX                                      = IOMUX_PAD(0x0348, 0x00E0, 3, 0x04FC, 7, 0),
+	IMX8MN_PAD_SD2_DATA1__PDM_BIT_STREAM1                                   = IOMUX_PAD(0x0348, 0x00E0, 4, 0x0538, 4, 0),
+	IMX8MN_PAD_SD2_DATA1__GPIO2_IO16                                        = IOMUX_PAD(0x0348, 0x00E0, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT                                 = IOMUX_PAD(0x0348, 0x00E0, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_DATA2__USDHC2_DATA2                                      = IOMUX_PAD(0x034C, 0x00E4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA2__SAI5_TX_BCLK                                      = IOMUX_PAD(0x034C, 0x00E4, 1, 0x04E8, 1, 0),
+	IMX8MN_PAD_SD2_DATA2__ECSPI2_SS0                                        = IOMUX_PAD(0x034C, 0x00E4, 2, 0x0570, 2, 0),
+	IMX8MN_PAD_SD2_DATA2__SPDIF1_OUT                                        = IOMUX_PAD(0x034C, 0x00E4, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA2__PDM_BIT_STREAM2                                   = IOMUX_PAD(0x034C, 0x00E4, 4, 0x053C, 4, 0),
+	IMX8MN_PAD_SD2_DATA2__GPIO2_IO17                                        = IOMUX_PAD(0x034C, 0x00E4, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP                                 = IOMUX_PAD(0x034C, 0x00E4, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_DATA3__USDHC2_DATA3                                      = IOMUX_PAD(0x0350, 0x00E8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA3__SAI5_TX_DATA0                                     = IOMUX_PAD(0x0350, 0x00E8, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA3__ECSPI2_MISO                                       = IOMUX_PAD(0x0350, 0x00E8, 2, 0x0578, 1, 0),
+	IMX8MN_PAD_SD2_DATA3__SPDIF1_IN                                         = IOMUX_PAD(0x0350, 0x00E8, 3, 0x05CC, 2, 0),
+	IMX8MN_PAD_SD2_DATA3__PDM_BIT_STREAM3                                   = IOMUX_PAD(0x0350, 0x00E8, 4, 0x0540, 4, 0),
+	IMX8MN_PAD_SD2_DATA3__GPIO2_IO18                                        = IOMUX_PAD(0x0350, 0x00E8, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET                          = IOMUX_PAD(0x0350, 0x00E8, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_RESET_B__USDHC2_RESET_B                                  = IOMUX_PAD(0x0354, 0x00EC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_RESET_B__GPIO2_IO19                                      = IOMUX_PAD(0x0354, 0x00EC, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET                       = IOMUX_PAD(0x0354, 0x00EC, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SD2_WP__USDHC2_WP                                            = IOMUX_PAD(0x0358, 0x00F0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_WP__GPIO2_IO20                                           = IOMUX_PAD(0x0358, 0x00F0, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SD2_WP__CORESIGHT_EVENTI                                     = IOMUX_PAD(0x0358, 0x00F0, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_ALE__RAWNAND_ALE                                        = IOMUX_PAD(0x035C, 0x00F4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_ALE__QSPI_A_SCLK                                        = IOMUX_PAD(0x035C, 0x00F4, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_ALE__PDM_BIT_STREAM0                                    = IOMUX_PAD(0x035C, 0x00F4, 3, 0x0534, 3, 0),
+	IMX8MN_PAD_NAND_ALE__UART3_DCE_RX                                       = IOMUX_PAD(0x035C, 0x00F4, 4, 0x0504, 6, 0),
+	IMX8MN_PAD_NAND_ALE__UART3_DTE_TX                                       = IOMUX_PAD(0x035C, 0x00F4, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_ALE__GPIO3_IO0                                          = IOMUX_PAD(0x035C, 0x00F4, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_ALE__CORESIGHT_TRACE_CLK                                = IOMUX_PAD(0x035C, 0x00F4, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_CE0_B__RAWNAND_CE0_B                                    = IOMUX_PAD(0x0360, 0x00F8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE0_B__QSPI_A_SS0_B                                     = IOMUX_PAD(0x0360, 0x00F8, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE0_B__PDM_BIT_STREAM1                                  = IOMUX_PAD(0x0360, 0x00F8, 3, 0x0538, 5, 0),
+	IMX8MN_PAD_NAND_CE0_B__UART3_DCE_TX                                     = IOMUX_PAD(0x0360, 0x00F8, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE0_B__UART3_DTE_RX                                     = IOMUX_PAD(0x0360, 0x00F8, 4, 0x0504, 7, 0),
+	IMX8MN_PAD_NAND_CE0_B__GPIO3_IO1                                        = IOMUX_PAD(0x0360, 0x00F8, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE0_B__CORESIGHT_TRACE_CTL                              = IOMUX_PAD(0x0360, 0x00F8, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_CE1_B__RAWNAND_CE1_B                                    = IOMUX_PAD(0x0364, 0x00FC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE1_B__QSPI_A_SS1_B                                     = IOMUX_PAD(0x0364, 0x00FC, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE1_B__USDHC3_STROBE                                    = IOMUX_PAD(0x0364, 0x00FC, 2, 0x059C, 0, 0),
+	IMX8MN_PAD_NAND_CE1_B__PDM_BIT_STREAM0                                  = IOMUX_PAD(0x0364, 0x00FC, 3, 0x0534, 4, 0),
+	IMX8MN_PAD_NAND_CE1_B__I2C4_SCL                                         = IOMUX_PAD(0x0364, 0x00FC, 4, 0x05D4, 2, 0),
+	IMX8MN_PAD_NAND_CE1_B__GPIO3_IO2                                        = IOMUX_PAD(0x0364, 0x00FC, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE1_B__CORESIGHT_TRACE0                                 = IOMUX_PAD(0x0364, 0x00FC, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_CE2_B__RAWNAND_CE2_B                                    = IOMUX_PAD(0x0368, 0x0100, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE2_B__QSPI_B_SS0_B                                     = IOMUX_PAD(0x0368, 0x0100, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE2_B__USDHC3_DATA5                                     = IOMUX_PAD(0x0368, 0x0100, 2, 0x0550, 0, 0),
+	IMX8MN_PAD_NAND_CE2_B__PDM_BIT_STREAM1                                  = IOMUX_PAD(0x0368, 0x0100, 3, 0x0538, 6, 0),
+	IMX8MN_PAD_NAND_CE2_B__I2C4_SDA                                         = IOMUX_PAD(0x0368, 0x0100, 4, 0x058C, 2, 0),
+	IMX8MN_PAD_NAND_CE2_B__GPIO3_IO3                                        = IOMUX_PAD(0x0368, 0x0100, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE2_B__CORESIGHT_TRACE1                                 = IOMUX_PAD(0x0368, 0x0100, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_CE3_B__RAWNAND_CE3_B                                    = IOMUX_PAD(0x036C, 0x0104, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE3_B__QSPI_B_SS1_B                                     = IOMUX_PAD(0x036C, 0x0104, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE3_B__USDHC3_DATA6                                     = IOMUX_PAD(0x036C, 0x0104, 2, 0x0584, 0, 0),
+	IMX8MN_PAD_NAND_CE3_B__PDM_BIT_STREAM2                                  = IOMUX_PAD(0x036C, 0x0104, 3, 0x053C, 5, 0),
+	IMX8MN_PAD_NAND_CE3_B__I2C3_SDA                                         = IOMUX_PAD(0x036C, 0x0104, 4, 0x05BC, 2, 0),
+	IMX8MN_PAD_NAND_CE3_B__GPIO3_IO4                                        = IOMUX_PAD(0x036C, 0x0104, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CE3_B__CORESIGHT_TRACE2                                 = IOMUX_PAD(0x036C, 0x0104, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_CLE__RAWNAND_CLE                                        = IOMUX_PAD(0x0370, 0x0108, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CLE__QSPI_B_SCLK                                        = IOMUX_PAD(0x0370, 0x0108, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CLE__USDHC3_DATA7                                       = IOMUX_PAD(0x0370, 0x0108, 2, 0x054C, 0, 0),
+	IMX8MN_PAD_NAND_CLE__GPIO3_IO5                                          = IOMUX_PAD(0x0370, 0x0108, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_CLE__CORESIGHT_TRACE3                                   = IOMUX_PAD(0x0370, 0x0108, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DATA00__RAWNAND_DATA00                                  = IOMUX_PAD(0x0374, 0x010C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA00__QSPI_A_DATA0                                    = IOMUX_PAD(0x0374, 0x010C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA00__PDM_BIT_STREAM2                                 = IOMUX_PAD(0x0374, 0x010C, 3, 0x053C, 6, 0),
+	IMX8MN_PAD_NAND_DATA00__UART4_DCE_RX                                    = IOMUX_PAD(0x0374, 0x010C, 4, 0x050C, 6, 0),
+	IMX8MN_PAD_NAND_DATA00__UART4_DTE_TX                                    = IOMUX_PAD(0x0374, 0x010C, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA00__GPIO3_IO6                                       = IOMUX_PAD(0x0374, 0x010C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA00__CORESIGHT_TRACE4                                = IOMUX_PAD(0x0374, 0x010C, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DATA01__RAWNAND_DATA01                                  = IOMUX_PAD(0x0378, 0x0110, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA01__QSPI_A_DATA1                                    = IOMUX_PAD(0x0378, 0x0110, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA01__PDM_BIT_STREAM3                                 = IOMUX_PAD(0x0378, 0x0110, 3, 0x0540, 5, 0),
+	IMX8MN_PAD_NAND_DATA01__UART4_DCE_TX                                    = IOMUX_PAD(0x0378, 0x0110, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA01__UART4_DTE_RX                                    = IOMUX_PAD(0x0378, 0x0110, 4, 0x050C, 7, 0),
+	IMX8MN_PAD_NAND_DATA01__GPIO3_IO7                                       = IOMUX_PAD(0x0378, 0x0110, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA01__CORESIGHT_TRACE5                                = IOMUX_PAD(0x0378, 0x0110, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DATA02__RAWNAND_DATA02                                  = IOMUX_PAD(0x037C, 0x0114, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA02__QSPI_A_DATA2                                    = IOMUX_PAD(0x037C, 0x0114, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA02__USDHC3_CD_B                                     = IOMUX_PAD(0x037C, 0x0114, 2, 0x0598, 0, 0),
+	IMX8MN_PAD_NAND_DATA02__I2C4_SDA                                        = IOMUX_PAD(0x037C, 0x0114, 4, 0x058C, 3, 0),
+	IMX8MN_PAD_NAND_DATA02__GPIO3_IO8                                       = IOMUX_PAD(0x037C, 0x0114, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA02__CORESIGHT_TRACE6                                = IOMUX_PAD(0x037C, 0x0114, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DATA03__RAWNAND_DATA03                                  = IOMUX_PAD(0x0380, 0x0118, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA03__QSPI_A_DATA3                                    = IOMUX_PAD(0x0380, 0x0118, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA03__USDHC3_WP                                       = IOMUX_PAD(0x0380, 0x0118, 2, 0x05B8, 0, 0),
+	IMX8MN_PAD_NAND_DATA03__GPIO3_IO9                                       = IOMUX_PAD(0x0380, 0x0118, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA03__CORESIGHT_TRACE7                                = IOMUX_PAD(0x0380, 0x0118, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DATA04__RAWNAND_DATA04                                  = IOMUX_PAD(0x0384, 0x011C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA04__QSPI_B_DATA0                                    = IOMUX_PAD(0x0384, 0x011C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA04__USDHC3_DATA0                                    = IOMUX_PAD(0x0384, 0x011C, 2, 0x05B4, 0, 0),
+	IMX8MN_PAD_NAND_DATA04__GPIO3_IO10                                      = IOMUX_PAD(0x0384, 0x011C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA04__CORESIGHT_TRACE8                                = IOMUX_PAD(0x0384, 0x011C, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DATA05__RAWNAND_DATA05                                  = IOMUX_PAD(0x0388, 0x0120, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA05__QSPI_B_DATA1                                    = IOMUX_PAD(0x0388, 0x0120, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA05__USDHC3_DATA1                                    = IOMUX_PAD(0x0388, 0x0120, 2, 0x05B0, 0, 0),
+	IMX8MN_PAD_NAND_DATA05__GPIO3_IO11                                      = IOMUX_PAD(0x0388, 0x0120, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA05__CORESIGHT_TRACE9                                = IOMUX_PAD(0x0388, 0x0120, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DATA06__RAWNAND_DATA06                                  = IOMUX_PAD(0x038C, 0x0124, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA06__QSPI_B_DATA2                                    = IOMUX_PAD(0x038C, 0x0124, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA06__USDHC3_DATA2                                    = IOMUX_PAD(0x038C, 0x0124, 2, 0x05E4, 0, 0),
+	IMX8MN_PAD_NAND_DATA06__GPIO3_IO12                                      = IOMUX_PAD(0x038C, 0x0124, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA06__CORESIGHT_TRACE10                               = IOMUX_PAD(0x038C, 0x0124, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DATA07__RAWNAND_DATA07                                  = IOMUX_PAD(0x0390, 0x0128, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA07__QSPI_B_DATA3                                    = IOMUX_PAD(0x0390, 0x0128, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA07__USDHC3_DATA3                                    = IOMUX_PAD(0x0390, 0x0128, 2, 0x05E0, 0, 0),
+	IMX8MN_PAD_NAND_DATA07__GPIO3_IO13                                      = IOMUX_PAD(0x0390, 0x0128, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DATA07__CORESIGHT_TRACE11                               = IOMUX_PAD(0x0390, 0x0128, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_DQS__RAWNAND_DQS                                        = IOMUX_PAD(0x0394, 0x012C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DQS__QSPI_A_DQS                                         = IOMUX_PAD(0x0394, 0x012C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DQS__PDM_CLK                                            = IOMUX_PAD(0x0394, 0x012C, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DQS__I2C3_SCL                                           = IOMUX_PAD(0x0394, 0x012C, 4, 0x0588, 2, 0),
+	IMX8MN_PAD_NAND_DQS__GPIO3_IO14                                         = IOMUX_PAD(0x0394, 0x012C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_DQS__CORESIGHT_TRACE12                                  = IOMUX_PAD(0x0394, 0x012C, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_RE_B__RAWNAND_RE_B                                      = IOMUX_PAD(0x0398, 0x0130, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_RE_B__QSPI_B_DQS                                        = IOMUX_PAD(0x0398, 0x0130, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_RE_B__USDHC3_DATA4                                      = IOMUX_PAD(0x0398, 0x0130, 2, 0x0558, 0, 0),
+	IMX8MN_PAD_NAND_RE_B__PDM_BIT_STREAM1                                   = IOMUX_PAD(0x0398, 0x0130, 3, 0x0538, 7, 0),
+	IMX8MN_PAD_NAND_RE_B__GPIO3_IO15                                        = IOMUX_PAD(0x0398, 0x0130, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_RE_B__CORESIGHT_TRACE13                                 = IOMUX_PAD(0x0398, 0x0130, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_READY_B__RAWNAND_READY_B                                = IOMUX_PAD(0x039C, 0x0134, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_READY_B__USDHC3_RESET_B                                 = IOMUX_PAD(0x039C, 0x0134, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_READY_B__PDM_BIT_STREAM3                                = IOMUX_PAD(0x039C, 0x0134, 3, 0x0540, 6, 0),
+	IMX8MN_PAD_NAND_READY_B__I2C3_SCL                                       = IOMUX_PAD(0x039C, 0x0134, 4, 0x0588, 3, 0),
+	IMX8MN_PAD_NAND_READY_B__GPIO3_IO16                                     = IOMUX_PAD(0x039C, 0x0134, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_READY_B__CORESIGHT_TRACE14                              = IOMUX_PAD(0x039C, 0x0134, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_WE_B__RAWNAND_WE_B                                      = IOMUX_PAD(0x03A0, 0x0138, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_WE_B__USDHC3_CLK                                        = IOMUX_PAD(0x03A0, 0x0138, 2  | IOMUX_CONFIG_SION, 0x05A0, 0, 0),
+	IMX8MN_PAD_NAND_WE_B__I2C3_SDA                                          = IOMUX_PAD(0x03A0, 0x0138, 4, 0x05BC, 3, 0),
+	IMX8MN_PAD_NAND_WE_B__GPIO3_IO17                                        = IOMUX_PAD(0x03A0, 0x0138, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_WE_B__CORESIGHT_TRACE15                                 = IOMUX_PAD(0x03A0, 0x0138, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_NAND_WP_B__RAWNAND_WP_B                                      = IOMUX_PAD(0x03A4, 0x013C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_WP_B__USDHC3_CMD                                        = IOMUX_PAD(0x03A4, 0x013C, 2, 0x05DC, 0, 0),
+	IMX8MN_PAD_NAND_WP_B__I2C4_SDA                                          = IOMUX_PAD(0x03A4, 0x013C, 4, 0x058C, 4, 0),
+	IMX8MN_PAD_NAND_WP_B__GPIO3_IO18                                        = IOMUX_PAD(0x03A4, 0x013C, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_NAND_WP_B__CORESIGHT_EVENTO                                  = IOMUX_PAD(0x03A4, 0x013C, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI5_RXFS__SAI5_RX_SYNC                                      = IOMUX_PAD(0x03A8, 0x0140, 0, 0x04E4, 0, 0),
+	IMX8MN_PAD_SAI5_RXFS__GPIO3_IO19                                        = IOMUX_PAD(0x03A8, 0x0140, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI5_RXC__SAI5_RX_BCLK                                       = IOMUX_PAD(0x03AC, 0x0144, 0, 0x04D0, 0, 0),
+	IMX8MN_PAD_SAI5_RXC__PDM_CLK                                            = IOMUX_PAD(0x03AC, 0x0144, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI5_RXC__GPIO3_IO20                                         = IOMUX_PAD(0x03AC, 0x0144, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI5_RXD0__SAI5_RX_DATA0                                     = IOMUX_PAD(0x03B0, 0x0148, 0, 0x04D4, 0, 0),
+	IMX8MN_PAD_SAI5_RXD0__PDM_BIT_STREAM0                                   = IOMUX_PAD(0x03B0, 0x0148, 4, 0x0534, 0, 0),
+	IMX8MN_PAD_SAI5_RXD0__GPIO3_IO21                                        = IOMUX_PAD(0x03B0, 0x0148, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI5_RXD1__SAI5_RX_DATA1                                     = IOMUX_PAD(0x03B4, 0x014C, 0, 0x04D8, 0, 0),
+	IMX8MN_PAD_SAI5_RXD1__SAI5_TX_SYNC                                      = IOMUX_PAD(0x03B4, 0x014C, 3, 0x04EC, 0, 0),
+	IMX8MN_PAD_SAI5_RXD1__PDM_BIT_STREAM1                                   = IOMUX_PAD(0x03B4, 0x014C, 4, 0x0538, 0, 0),
+	IMX8MN_PAD_SAI5_RXD1__GPIO3_IO22                                        = IOMUX_PAD(0x03B4, 0x014C, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI5_RXD2__SAI5_RX_DATA2                                     = IOMUX_PAD(0x03B8, 0x0150, 0, 0x04DC, 0, 0),
+	IMX8MN_PAD_SAI5_RXD2__SAI5_TX_BCLK                                      = IOMUX_PAD(0x03B8, 0x0150, 3, 0x04E8, 0, 0),
+	IMX8MN_PAD_SAI5_RXD2__PDM_BIT_STREAM2                                   = IOMUX_PAD(0x03B8, 0x0150, 4, 0x053C, 0, 0),
+	IMX8MN_PAD_SAI5_RXD2__GPIO3_IO23                                        = IOMUX_PAD(0x03B8, 0x0150, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI5_RXD3__SAI5_RX_DATA3                                     = IOMUX_PAD(0x03BC, 0x0154, 0, 0x04E0, 0, 0),
+	IMX8MN_PAD_SAI5_RXD3__SAI5_TX_DATA0                                     = IOMUX_PAD(0x03BC, 0x0154, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI5_RXD3__PDM_BIT_STREAM3                                   = IOMUX_PAD(0x03BC, 0x0154, 4, 0x0540, 0, 0),
+	IMX8MN_PAD_SAI5_RXD3__GPIO3_IO24                                        = IOMUX_PAD(0x03BC, 0x0154, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI5_MCLK__SAI5_MCLK                                         = IOMUX_PAD(0x03C0, 0x0158, 0, 0x0594, 0, 0),
+	IMX8MN_PAD_SAI5_MCLK__GPIO3_IO25                                        = IOMUX_PAD(0x03C0, 0x0158, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI2_RXFS__SAI2_RX_SYNC                                      = IOMUX_PAD(0x0418, 0x01B0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXFS__SAI5_TX_SYNC                                      = IOMUX_PAD(0x0418, 0x01B0, 1, 0x04EC, 2, 0),
+	IMX8MN_PAD_SAI2_RXFS__SAI5_TX_DATA1                                     = IOMUX_PAD(0x0418, 0x01B0, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXFS__SAI2_RX_DATA1                                     = IOMUX_PAD(0x0418, 0x01B0, 3, 0x05AC, 0, 0),
+	IMX8MN_PAD_SAI2_RXFS__UART1_DCE_TX                                      = IOMUX_PAD(0x0418, 0x01B0, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXFS__UART1_DTE_RX                                      = IOMUX_PAD(0x0418, 0x01B0, 4, 0x04F4, 2, 0),
+	IMX8MN_PAD_SAI2_RXFS__GPIO4_IO21                                        = IOMUX_PAD(0x0418, 0x01B0, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXFS__PDM_BIT_STREAM2                                   = IOMUX_PAD(0x0418, 0x01B0, 6, 0x053C, 7, 0),
+
+	IMX8MN_PAD_SAI2_RXC__SAI2_RX_BCLK                                       = IOMUX_PAD(0x041C, 0x01B4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXC__SAI5_TX_BCLK                                       = IOMUX_PAD(0x041C, 0x01B4, 1, 0x04E8, 2, 0),
+	IMX8MN_PAD_SAI2_RXC__UART1_DCE_RX                                       = IOMUX_PAD(0x041C, 0x01B4, 4, 0x04F4, 3, 0),
+	IMX8MN_PAD_SAI2_RXC__UART1_DTE_TX                                       = IOMUX_PAD(0x041C, 0x01B4, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXC__GPIO4_IO22                                         = IOMUX_PAD(0x041C, 0x01B4, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXC__PDM_BIT_STREAM1                                    = IOMUX_PAD(0x041C, 0x01B4, 6, 0x0538, 8, 0),
+
+	IMX8MN_PAD_SAI2_RXD0__SAI2_RX_DATA0                                     = IOMUX_PAD(0x0420, 0x01B8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXD0__SAI5_TX_DATA0                                     = IOMUX_PAD(0x0420, 0x01B8, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXD0__SAI2_TX_DATA1                                     = IOMUX_PAD(0x0420, 0x01B8, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXD0__UART1_DCE_RTS_B                                   = IOMUX_PAD(0x0420, 0x01B8, 4, 0x04F0, 2, 0),
+	IMX8MN_PAD_SAI2_RXD0__UART1_DTE_CTS_B                                   = IOMUX_PAD(0x0420, 0x01B8, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXD0__GPIO4_IO23                                        = IOMUX_PAD(0x0420, 0x01B8, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_RXD0__PDM_BIT_STREAM3                                   = IOMUX_PAD(0x0420, 0x01B8, 6, 0x0540, 7, 0),
+
+	IMX8MN_PAD_SAI2_TXFS__SAI2_TX_SYNC                                      = IOMUX_PAD(0x0424, 0x01BC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXFS__SAI5_TX_DATA1                                     = IOMUX_PAD(0x0424, 0x01BC, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXFS__SAI2_TX_DATA1                                     = IOMUX_PAD(0x0424, 0x01BC, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXFS__UART1_DCE_CTS_B                                   = IOMUX_PAD(0x0424, 0x01BC, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXFS__UART1_DTE_RTS_B                                   = IOMUX_PAD(0x0424, 0x01BC, 4, 0x04F0, 3, 0),
+	IMX8MN_PAD_SAI2_TXFS__GPIO4_IO24                                        = IOMUX_PAD(0x0424, 0x01BC, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXFS__PDM_BIT_STREAM2                                   = IOMUX_PAD(0x0424, 0x01BC, 6, 0x053C, 8, 0),
+
+	IMX8MN_PAD_SAI2_TXC__SAI2_TX_BCLK                                       = IOMUX_PAD(0x0428, 0x01C0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXC__SAI5_TX_DATA2                                      = IOMUX_PAD(0x0428, 0x01C0, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXC__GPIO4_IO25                                         = IOMUX_PAD(0x0428, 0x01C0, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXC__PDM_BIT_STREAM1                                    = IOMUX_PAD(0x0428, 0x01C0, 6, 0x0538, 9, 0),
+
+	IMX8MN_PAD_SAI2_TXD0__SAI2_TX_DATA0                                     = IOMUX_PAD(0x042C, 0x01C4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXD0__SAI5_TX_DATA3                                     = IOMUX_PAD(0x042C, 0x01C4, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXD0__GPIO4_IO26                                        = IOMUX_PAD(0x042C, 0x01C4, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_TXD0__CCMSRCGPCMIX_BOOT_MODE4                           = IOMUX_PAD(0x042C, 0x01C4, 6, 0x0540, 8, 0),
+
+	IMX8MN_PAD_SAI2_MCLK__SAI2_MCLK                                         = IOMUX_PAD(0x0430, 0x01C8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_MCLK__SAI5_MCLK                                         = IOMUX_PAD(0x0430, 0x01C8, 1, 0x0594, 2, 0),
+	IMX8MN_PAD_SAI2_MCLK__GPIO4_IO27                                        = IOMUX_PAD(0x0430, 0x01C8, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI2_MCLK__SAI3_MCLK                                         = IOMUX_PAD(0x0430, 0x01C8, 6, 0x05C0, 1, 0),
+
+	IMX8MN_PAD_SAI3_RXFS__SAI3_RX_SYNC                                      = IOMUX_PAD(0x0434, 0x01CC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXFS__GPT1_CAPTURE1                                     = IOMUX_PAD(0x0434, 0x01CC, 1, 0x05F0, 0, 0),
+	IMX8MN_PAD_SAI3_RXFS__SAI5_RX_SYNC                                      = IOMUX_PAD(0x0434, 0x01CC, 2, 0x04E4, 2, 0),
+	IMX8MN_PAD_SAI3_RXFS__SAI3_RX_DATA1                                     = IOMUX_PAD(0x0434, 0x01CC, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXFS__SPDIF1_IN                                         = IOMUX_PAD(0x0434, 0x01CC, 4, 0x05CC, 3, 0),
+	IMX8MN_PAD_SAI3_RXFS__GPIO4_IO28                                        = IOMUX_PAD(0x0434, 0x01CC, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXFS__PDM_BIT_STREAM0                                   = IOMUX_PAD(0x0434, 0x01CC, 6, 0x0534, 5, 0),
+
+	IMX8MN_PAD_SAI3_RXC__SAI3_RX_BCLK                                       = IOMUX_PAD(0x0438, 0x01D0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXC__GPT1_CLK                                           = IOMUX_PAD(0x0438, 0x01D0, 1, 0x05E8, 0, 0),
+	IMX8MN_PAD_SAI3_RXC__SAI5_RX_BCLK                                       = IOMUX_PAD(0x0438, 0x01D0, 2, 0x04D0, 2, 0),
+	IMX8MN_PAD_SAI3_RXC__SAI2_RX_DATA1                                      = IOMUX_PAD(0x0438, 0x01D0, 3, 0x05AC, 2, 0),
+	IMX8MN_PAD_SAI3_RXC__UART2_DCE_CTS_B                                    = IOMUX_PAD(0x0438, 0x01D0, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXC__UART2_DTE_RTS_B                                    = IOMUX_PAD(0x0438, 0x01D0, 4, 0x04F8, 2, 0),
+	IMX8MN_PAD_SAI3_RXC__GPIO4_IO29                                         = IOMUX_PAD(0x0438, 0x01D0, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXC__PDM_CLK                                            = IOMUX_PAD(0x0438, 0x01D0, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI3_RXD__SAI3_RX_DATA0                                      = IOMUX_PAD(0x043C, 0x01D4, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXD__GPT1_COMPARE1                                      = IOMUX_PAD(0x043C, 0x01D4, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXD__SAI5_RX_DATA0                                      = IOMUX_PAD(0x043C, 0x01D4, 2, 0x04D4, 2, 0),
+	IMX8MN_PAD_SAI3_RXD__SAI3_TX_DATA1                                      = IOMUX_PAD(0x043C, 0x01D4, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXD__UART2_DCE_RTS_B                                    = IOMUX_PAD(0x043C, 0x01D4, 4, 0x04F8, 3, 0),
+	IMX8MN_PAD_SAI3_RXD__UART2_DTE_CTS_B                                    = IOMUX_PAD(0x043C, 0x01D4, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXD__GPIO4_IO30                                         = IOMUX_PAD(0x043C, 0x01D4, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_RXD__PDM_BIT_STREAM1                                    = IOMUX_PAD(0x043C, 0x01D4, 6, 0x0538, 10, 0),
+
+	IMX8MN_PAD_SAI3_TXFS__SAI3_TX_SYNC                                      = IOMUX_PAD(0x0440, 0x01D8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXFS__GPT1_CAPTURE2                                     = IOMUX_PAD(0x0440, 0x01D8, 1, 0x05EC, 0, 0),
+	IMX8MN_PAD_SAI3_TXFS__SAI5_RX_DATA1                                     = IOMUX_PAD(0x0440, 0x01D8, 2, 0x04D8, 1, 0),
+	IMX8MN_PAD_SAI3_TXFS__SAI3_TX_DATA1                                     = IOMUX_PAD(0x0440, 0x01D8, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXFS__UART2_DCE_RX                                      = IOMUX_PAD(0x0440, 0x01D8, 4, 0x04FC, 2, 0),
+	IMX8MN_PAD_SAI3_TXFS__UART2_DTE_TX                                      = IOMUX_PAD(0x0440, 0x01D8, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXFS__GPIO4_IO31                                        = IOMUX_PAD(0x0440, 0x01D8, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXFS__PDM_BIT_STREAM3                                   = IOMUX_PAD(0x0440, 0x01D8, 6, 0x0540, 9, 0),
+
+	IMX8MN_PAD_SAI3_TXC__SAI3_TX_BCLK                                       = IOMUX_PAD(0x0444, 0x01DC, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXC__GPT1_COMPARE2                                      = IOMUX_PAD(0x0444, 0x01DC, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXC__SAI5_RX_DATA2                                      = IOMUX_PAD(0x0444, 0x01DC, 2, 0x04DC, 1, 0),
+	IMX8MN_PAD_SAI3_TXC__SAI2_TX_DATA1                                      = IOMUX_PAD(0x0444, 0x01DC, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXC__UART2_DCE_TX                                       = IOMUX_PAD(0x0444, 0x01DC, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXC__UART2_DTE_RX                                       = IOMUX_PAD(0x0444, 0x01DC, 4, 0x04FC, 3, 0),
+	IMX8MN_PAD_SAI3_TXC__GPIO5_IO0                                          = IOMUX_PAD(0x0444, 0x01DC, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXC__PDM_BIT_STREAM2                                    = IOMUX_PAD(0x0444, 0x01DC, 6, 0x053C, 9, 0),
+
+	IMX8MN_PAD_SAI3_TXD__SAI3_TX_DATA0                                      = IOMUX_PAD(0x0448, 0x01E0, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXD__GPT1_COMPARE3                                      = IOMUX_PAD(0x0448, 0x01E0, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXD__SAI5_RX_DATA3                                      = IOMUX_PAD(0x0448, 0x01E0, 2, 0x04E0, 1, 0),
+	IMX8MN_PAD_SAI3_TXD__SPDIF1_EXT_CLK                                     = IOMUX_PAD(0x0448, 0x01E0, 4, 0x0568, 2, 0),
+	IMX8MN_PAD_SAI3_TXD__GPIO5_IO1                                          = IOMUX_PAD(0x0448, 0x01E0, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_TXD__CCMSRCGPCMIX_BOOT_MODE5                            = IOMUX_PAD(0x0448, 0x01E0, 6, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SAI3_MCLK__SAI3_MCLK                                         = IOMUX_PAD(0x044C, 0x01E4, 0, 0x05C0, 0, 0),
+	IMX8MN_PAD_SAI3_MCLK__PWM4_OUT                                          = IOMUX_PAD(0x044C, 0x01E4, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_MCLK__SAI5_MCLK                                         = IOMUX_PAD(0x044C, 0x01E4, 2, 0x0594, 3, 0),
+	IMX8MN_PAD_SAI3_MCLK__SPDIF1_OUT                                        = IOMUX_PAD(0x044C, 0x01E4, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_MCLK__GPIO5_IO2                                         = IOMUX_PAD(0x044C, 0x01E4, 5, 0x0000, 0, 0),
+	IMX8MN_PAD_SAI3_MCLK__SPDIF1_IN                                         = IOMUX_PAD(0x044C, 0x01E4, 6, 0x05CC, 4, 0),
+
+	IMX8MN_PAD_SPDIF_TX__SPDIF1_OUT                                         = IOMUX_PAD(0x0450, 0x01E8, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_SPDIF_TX__PWM3_OUT                                           = IOMUX_PAD(0x0450, 0x01E8, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SPDIF_TX__GPIO5_IO3                                          = IOMUX_PAD(0x0450, 0x01E8, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SPDIF_RX__SPDIF1_IN                                          = IOMUX_PAD(0x0454, 0x01EC, 0, 0x05CC, 0, 0),
+	IMX8MN_PAD_SPDIF_RX__PWM2_OUT                                           = IOMUX_PAD(0x0454, 0x01EC, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SPDIF_RX__GPIO5_IO4                                          = IOMUX_PAD(0x0454, 0x01EC, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_SPDIF_EXT_CLK__SPDIF1_EXT_CLK                                = IOMUX_PAD(0x0458, 0x01F0, 0, 0x0568, 0, 0),
+	IMX8MN_PAD_SPDIF_EXT_CLK__PWM1_OUT                                      = IOMUX_PAD(0x0458, 0x01F0, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_SPDIF_EXT_CLK__GPIO5_IO5                                     = IOMUX_PAD(0x0458, 0x01F0, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ECSPI1_SCLK__ECSPI1_SCLK                                     = IOMUX_PAD(0x045C, 0x01F4, 0, 0x05D8, 0, 0),
+	IMX8MN_PAD_ECSPI1_SCLK__UART3_DCE_RX                                    = IOMUX_PAD(0x045C, 0x01F4, 1, 0x0504, 0, 0),
+	IMX8MN_PAD_ECSPI1_SCLK__UART3_DTE_TX                                    = IOMUX_PAD(0x045C, 0x01F4, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI1_SCLK__I2C1_SCL                                        = IOMUX_PAD(0x045C, 0x01F4, 2, 0x055C, 2, 0),
+	IMX8MN_PAD_ECSPI1_SCLK__SAI5_RX_SYNC                                    = IOMUX_PAD(0x045C, 0x01F4, 3, 0x04DC, 2, 0),
+	IMX8MN_PAD_ECSPI1_SCLK__GPIO5_IO6                                       = IOMUX_PAD(0x045C, 0x01F4, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ECSPI1_MOSI__ECSPI1_MOSI                                     = IOMUX_PAD(0x0460, 0x01F8, 0, 0x05A8, 0, 0),
+	IMX8MN_PAD_ECSPI1_MOSI__UART3_DCE_TX                                    = IOMUX_PAD(0x0460, 0x01F8, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI1_MOSI__UART3_DTE_RX                                    = IOMUX_PAD(0x0460, 0x01F8, 1, 0x0504, 1, 0),
+	IMX8MN_PAD_ECSPI1_MOSI__I2C1_SDA                                        = IOMUX_PAD(0x0460, 0x01F8, 2, 0x056C, 2, 0),
+	IMX8MN_PAD_ECSPI1_MOSI__SAI5_RX_BCLK                                    = IOMUX_PAD(0x0460, 0x01F8, 3, 0x04D0, 3, 0),
+	IMX8MN_PAD_ECSPI1_MOSI__GPIO5_IO7                                       = IOMUX_PAD(0x0460, 0x01F8, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ECSPI1_MISO__ECSPI1_MISO                                     = IOMUX_PAD(0x0464, 0x01FC, 0, 0x05C4, 0, 0),
+	IMX8MN_PAD_ECSPI1_MISO__UART3_DCE_CTS_B                                 = IOMUX_PAD(0x0464, 0x01FC, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI1_MISO__UART3_DTE_RTS_B                                 = IOMUX_PAD(0x0464, 0x01FC, 1, 0x0500, 0, 0),
+	IMX8MN_PAD_ECSPI1_MISO__I2C2_SCL                                        = IOMUX_PAD(0x0464, 0x01FC, 2, 0x05D0, 2, 0),
+	IMX8MN_PAD_ECSPI1_MISO__SAI5_RX_DATA0                                   = IOMUX_PAD(0x0464, 0x01FC, 3, 0x04D4, 3, 0),
+	IMX8MN_PAD_ECSPI1_MISO__GPIO5_IO8                                       = IOMUX_PAD(0x0464, 0x01FC, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ECSPI1_SS0__ECSPI1_SS0                                       = IOMUX_PAD(0x0468, 0x0200, 0, 0x0564, 0, 0),
+	IMX8MN_PAD_ECSPI1_SS0__UART3_DCE_RTS_B                                  = IOMUX_PAD(0x0468, 0x0200, 1, 0x0500, 1, 0),
+	IMX8MN_PAD_ECSPI1_SS0__UART3_DTE_CTS_B                                  = IOMUX_PAD(0x0468, 0x0200, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI1_SS0__I2C2_SDA                                         = IOMUX_PAD(0x0468, 0x0200, 2, 0x0560, 2, 0),
+	IMX8MN_PAD_ECSPI1_SS0__SAI5_RX_DATA1                                    = IOMUX_PAD(0x0468, 0x0200, 3, 0x04D8, 2, 0),
+	IMX8MN_PAD_ECSPI1_SS0__SAI5_TX_SYNC                                     = IOMUX_PAD(0x0468, 0x0200, 4, 0x04EC, 3, 0),
+	IMX8MN_PAD_ECSPI1_SS0__GPIO5_IO9                                        = IOMUX_PAD(0x0468, 0x0200, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ECSPI2_SCLK__ECSPI2_SCLK                                     = IOMUX_PAD(0x046C, 0x0204, 0, 0x0580, 0, 0),
+	IMX8MN_PAD_ECSPI2_SCLK__UART4_DCE_RX                                    = IOMUX_PAD(0x046C, 0x0204, 1, 0x050C, 0, 0),
+	IMX8MN_PAD_ECSPI2_SCLK__UART4_DTE_TX                                    = IOMUX_PAD(0x046C, 0x0204, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI2_SCLK__I2C3_SCL                                        = IOMUX_PAD(0x046C, 0x0204, 2, 0x0588, 4, 0),
+	IMX8MN_PAD_ECSPI2_SCLK__SAI5_RX_DATA2                                   = IOMUX_PAD(0x046C, 0x0204, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI2_SCLK__SAI5_TX_BCLK                                    = IOMUX_PAD(0x046C, 0x0204, 4, 0x04E8, 3, 0),
+	IMX8MN_PAD_ECSPI2_SCLK__GPIO5_IO10                                      = IOMUX_PAD(0x046C, 0x0204, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ECSPI2_MOSI__ECSPI2_MOSI                                     = IOMUX_PAD(0x0470, 0x0208, 0, 0x0590, 0, 0),
+	IMX8MN_PAD_ECSPI2_MOSI__UART4_DCE_TX                                    = IOMUX_PAD(0x0470, 0x0208, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI2_MOSI__UART4_DTE_RX                                    = IOMUX_PAD(0x0470, 0x0208, 1, 0x050C, 1, 0),
+	IMX8MN_PAD_ECSPI2_MOSI__I2C3_SDA                                        = IOMUX_PAD(0x0470, 0x0208, 2, 0x05BC, 4, 0),
+	IMX8MN_PAD_ECSPI2_MOSI__SAI5_RX_DATA3                                   = IOMUX_PAD(0x0470, 0x0208, 3, 0x04E0, 2, 0),
+	IMX8MN_PAD_ECSPI2_MOSI__SAI5_TX_DATA0                                   = IOMUX_PAD(0x0470, 0x0208, 4, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI2_MOSI__GPIO5_IO11                                      = IOMUX_PAD(0x0470, 0x0208, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ECSPI2_MISO__ECSPI2_MISO                                     = IOMUX_PAD(0x0474, 0x020C, 0, 0x0578, 0, 0),
+	IMX8MN_PAD_ECSPI2_MISO__UART4_DCE_CTS_B                                 = IOMUX_PAD(0x0474, 0x020C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI2_MISO__UART4_DTE_RTS_B                                 = IOMUX_PAD(0x0474, 0x020C, 1, 0x0508, 0, 0),
+	IMX8MN_PAD_ECSPI2_MISO__I2C4_SCL                                        = IOMUX_PAD(0x0474, 0x020C, 2, 0x05D4, 3, 0),
+	IMX8MN_PAD_ECSPI2_MISO__SAI5_MCLK                                       = IOMUX_PAD(0x0474, 0x020C, 3, 0x0594, 4, 0),
+	IMX8MN_PAD_ECSPI2_MISO__GPIO5_IO12                                      = IOMUX_PAD(0x0474, 0x020C, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_ECSPI2_SS0__ECSPI2_SS0                                       = IOMUX_PAD(0x0478, 0x0210, 0, 0x0570, 0, 0),
+	IMX8MN_PAD_ECSPI2_SS0__UART4_DCE_RTS_B                                  = IOMUX_PAD(0x0478, 0x0210, 1, 0x0508, 1, 0),
+	IMX8MN_PAD_ECSPI2_SS0__UART4_DTE_CTS_B                                  = IOMUX_PAD(0x0478, 0x0210, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_ECSPI2_SS0__I2C4_SDA                                         = IOMUX_PAD(0x0478, 0x0210, 2, 0x058C, 5, 0),
+	IMX8MN_PAD_ECSPI2_SS0__GPIO5_IO13                                       = IOMUX_PAD(0x0478, 0x0210, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_I2C1_SCL__I2C1_SCL                                           = IOMUX_PAD(0x047C, 0x0214, 0 | IOMUX_CONFIG_SION, 0x055C, 0, 0),
+	IMX8MN_PAD_I2C1_SCL__ENET1_MDC                                          = IOMUX_PAD(0x047C, 0x0214, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C1_SCL__ECSPI1_SCLK                                        = IOMUX_PAD(0x047C, 0x0214, 3, 0x05D8, 1, 0),
+	IMX8MN_PAD_I2C1_SCL__GPIO5_IO14                                         = IOMUX_PAD(0x047C, 0x0214, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_I2C1_SDA__I2C1_SDA                                           = IOMUX_PAD(0x0480, 0x0218, 0 | IOMUX_CONFIG_SION, 0x056C, 0, 0),
+	IMX8MN_PAD_I2C1_SDA__ENET1_MDIO                                         = IOMUX_PAD(0x0480, 0x0218, 1, 0x04C0, 2, 0),
+	IMX8MN_PAD_I2C1_SDA__ECSPI1_MOSI                                        = IOMUX_PAD(0x0480, 0x0218, 3, 0x05A8, 1, 0),
+	IMX8MN_PAD_I2C1_SDA__GPIO5_IO15                                         = IOMUX_PAD(0x0480, 0x0218, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_I2C2_SCL__I2C2_SCL                                           = IOMUX_PAD(0x0484, 0x021C, 0, 0x05D0, 0, 0),
+	IMX8MN_PAD_I2C2_SCL__ENET1_1588_EVENT1_IN                               = IOMUX_PAD(0x0484, 0x021C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C2_SCL__USDHC3_CD_B                                        = IOMUX_PAD(0x0484, 0x021C, 2, 0x0598, 1, 0),
+	IMX8MN_PAD_I2C2_SCL__ECSPI1_MISO                                        = IOMUX_PAD(0x0484, 0x021C, 3, 0x05C4, 1, 0),
+	IMX8MN_PAD_I2C2_SCL__GPIO5_IO16                                         = IOMUX_PAD(0x0484, 0x021C, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_I2C2_SDA__I2C2_SDA                                           = IOMUX_PAD(0x0488, 0x0220, 0, 0x0560, 0, 0),
+	IMX8MN_PAD_I2C2_SDA__ENET1_1588_EVENT1_OUT                              = IOMUX_PAD(0x0488, 0x0220, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C2_SDA__USDHC3_WP                                          = IOMUX_PAD(0x0488, 0x0220, 2, 0x05B8, 1, 0),
+	IMX8MN_PAD_I2C2_SDA__ECSPI1_SS0                                         = IOMUX_PAD(0x0488, 0x0220, 3, 0x0564, 1, 0),
+	IMX8MN_PAD_I2C2_SDA__GPIO5_IO17                                         = IOMUX_PAD(0x0488, 0x0220, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_I2C3_SCL__I2C3_SCL                                           = IOMUX_PAD(0x048C, 0x0224, 0, 0x0588, 0, 0),
+	IMX8MN_PAD_I2C3_SCL__PWM4_OUT                                           = IOMUX_PAD(0x048C, 0x0224, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C3_SCL__GPT2_CLK                                           = IOMUX_PAD(0x048C, 0x0224, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C3_SCL__ECSPI2_SCLK                                        = IOMUX_PAD(0x048C, 0x0224, 3, 0x0580, 2, 0),
+	IMX8MN_PAD_I2C3_SCL__GPIO5_IO18                                         = IOMUX_PAD(0x048C, 0x0224, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_I2C3_SDA__I2C3_SDA                                           = IOMUX_PAD(0x0490, 0x0228, 0, 0x05BC, 0, 0),
+	IMX8MN_PAD_I2C3_SDA__PWM3_OUT                                           = IOMUX_PAD(0x0490, 0x0228, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C3_SDA__GPT3_CLK                                           = IOMUX_PAD(0x0490, 0x0228, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C3_SDA__ECSPI2_MOSI                                        = IOMUX_PAD(0x0490, 0x0228, 3, 0x0590, 2, 0),
+	IMX8MN_PAD_I2C3_SDA__GPIO5_IO19                                         = IOMUX_PAD(0x0490, 0x0228, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_I2C4_SCL__I2C4_SCL                                           = IOMUX_PAD(0x0494, 0x022C, 0, 0x05D4, 0, 0),
+	IMX8MN_PAD_I2C4_SCL__PWM2_OUT                                           = IOMUX_PAD(0x0494, 0x022C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C4_SCL__ECSPI2_MISO                                        = IOMUX_PAD(0x0494, 0x022C, 3, 0x0578, 2, 0),
+	IMX8MN_PAD_I2C4_SCL__GPIO5_IO20                                         = IOMUX_PAD(0x0494, 0x022C, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_I2C4_SDA__I2C4_SDA                                           = IOMUX_PAD(0x0498, 0x0230, 0, 0x058C, 0, 0),
+	IMX8MN_PAD_I2C4_SDA__PWM1_OUT                                           = IOMUX_PAD(0x0498, 0x0230, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_I2C4_SDA__ECSPI2_SS0                                         = IOMUX_PAD(0x0498, 0x0230, 3, 0x0570, 1, 0),
+	IMX8MN_PAD_I2C4_SDA__GPIO5_IO21                                         = IOMUX_PAD(0x0498, 0x0230, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_UART1_RXD__UART1_DCE_RX                                      = IOMUX_PAD(0x049C, 0x0234, 0, 0x04F4, 0, 0),
+	IMX8MN_PAD_UART1_RXD__UART1_DTE_TX                                      = IOMUX_PAD(0x049C, 0x0234, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_UART1_RXD__ECSPI3_SCLK                                       = IOMUX_PAD(0x049C, 0x0234, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_UART1_RXD__GPIO5_IO22                                        = IOMUX_PAD(0x049C, 0x0234, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_UART1_TXD__UART1_DCE_TX                                      = IOMUX_PAD(0x04A0, 0x0238, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_UART1_TXD__UART1_DTE_RX                                      = IOMUX_PAD(0x04A0, 0x0238, 0, 0x04F4, 1, 0),
+	IMX8MN_PAD_UART1_TXD__ECSPI3_MOSI                                       = IOMUX_PAD(0x04A0, 0x0238, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_UART1_TXD__GPIO5_IO23                                        = IOMUX_PAD(0x04A0, 0x0238, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_UART2_RXD__UART2_DCE_RX                                      = IOMUX_PAD(0x04A4, 0x023C, 0, 0x04FC, 0, 0),
+	IMX8MN_PAD_UART2_RXD__UART2_DTE_TX                                      = IOMUX_PAD(0x04A4, 0x023C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_UART2_RXD__ECSPI3_MISO                                       = IOMUX_PAD(0x04A4, 0x023C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_UART2_RXD__GPT1_COMPARE3                                     = IOMUX_PAD(0x04A4, 0x023C, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_UART2_RXD__GPIO5_IO24                                        = IOMUX_PAD(0x04A4, 0x023C, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_UART2_TXD__UART2_DCE_TX                                      = IOMUX_PAD(0x04A8, 0x0240, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_UART2_TXD__UART2_DTE_RX                                      = IOMUX_PAD(0x04A8, 0x0240, 0, 0x04FC, 1, 0),
+	IMX8MN_PAD_UART2_TXD__ECSPI3_SS0                                        = IOMUX_PAD(0x04A8, 0x0240, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_UART2_TXD__GPT1_COMPARE2                                     = IOMUX_PAD(0x04A8, 0x0240, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_UART2_TXD__GPIO5_IO25                                        = IOMUX_PAD(0x04A8, 0x0240, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_UART3_RXD__UART3_DCE_RX                                      = IOMUX_PAD(0x04AC, 0x0244, 0, 0x0504, 2, 0),
+	IMX8MN_PAD_UART3_RXD__UART3_DTE_TX                                      = IOMUX_PAD(0x04AC, 0x0244, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_UART3_RXD__UART1_DCE_CTS_B                                   = IOMUX_PAD(0x04AC, 0x0244, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_UART3_RXD__UART1_DTE_RTS_B                                   = IOMUX_PAD(0x04AC, 0x0244, 1, 0x04F0, 0, 0),
+	IMX8MN_PAD_UART3_RXD__USDHC3_RESET_B                                    = IOMUX_PAD(0x04AC, 0x0244, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_UART3_RXD__GPT1_CAPTURE2                                     = IOMUX_PAD(0x04AC, 0x0244, 3, 0x05EC, 1, 0),
+	IMX8MN_PAD_UART3_RXD__GPIO5_IO26                                        = IOMUX_PAD(0x04AC, 0x0244, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_UART3_TXD__UART3_DCE_TX                                      = IOMUX_PAD(0x04B0, 0x0248, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_UART3_TXD__UART3_DTE_RX                                      = IOMUX_PAD(0x04B0, 0x0248, 0, 0x0504, 3, 0),
+	IMX8MN_PAD_UART3_TXD__UART1_DCE_RTS_B                                   = IOMUX_PAD(0x04B0, 0x0248, 1, 0x04F0, 1, 0),
+	IMX8MN_PAD_UART3_TXD__UART1_DTE_CTS_B                                   = IOMUX_PAD(0x04B0, 0x0248, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_UART3_TXD__USDHC3_VSELECT                                    = IOMUX_PAD(0x04B0, 0x0248, 2, 0x0000, 0, 0),
+	IMX8MN_PAD_UART3_TXD__GPT1_CLK                                          = IOMUX_PAD(0x04B0, 0x0248, 3, 0x05E8, 1, 0),
+	IMX8MN_PAD_UART3_TXD__GPIO5_IO27                                        = IOMUX_PAD(0x04B0, 0x0248, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_UART4_RXD__UART4_DCE_RX                                      = IOMUX_PAD(0x04B4, 0x024C, 0, 0x050C, 2, 0),
+	IMX8MN_PAD_UART4_RXD__UART4_DTE_TX                                      = IOMUX_PAD(0x04B4, 0x024C, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_UART4_RXD__UART2_DCE_CTS_B                                   = IOMUX_PAD(0x04B4, 0x024C, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_UART4_RXD__UART2_DTE_RTS_B                                   = IOMUX_PAD(0x04B4, 0x024C, 1, 0x04F8, 0, 0),
+	IMX8MN_PAD_UART4_RXD__GPT1_COMPARE1                                     = IOMUX_PAD(0x04B4, 0x024C, 3, 0x0000, 0, 0),
+	IMX8MN_PAD_UART4_RXD__GPIO5_IO28                                        = IOMUX_PAD(0x04B4, 0x024C, 5, 0x0000, 0, 0),
+
+	IMX8MN_PAD_UART4_TXD__UART4_DCE_TX                                      = IOMUX_PAD(0x04B8, 0x0250, 0, 0x0000, 0, 0),
+	IMX8MN_PAD_UART4_TXD__UART4_DTE_RX                                      = IOMUX_PAD(0x04B8, 0x0250, 0, 0x050C, 3, 0),
+	IMX8MN_PAD_UART4_TXD__UART2_DCE_RTS_B                                   = IOMUX_PAD(0x04B8, 0x0250, 1, 0x04F8, 1, 0),
+	IMX8MN_PAD_UART4_TXD__UART2_DTE_CTS_B                                   = IOMUX_PAD(0x04B8, 0x0250, 1, 0x0000, 0, 0),
+	IMX8MN_PAD_UART4_TXD__GPT1_CAPTURE1                                     = IOMUX_PAD(0x04B8, 0x0250, 3, 0x05F0, 1, 0),
+	IMX8MN_PAD_UART4_TXD__GPIO5_IO29                                        = IOMUX_PAD(0x04B8, 0x0250, 5, 0x0000, 0, 0),
+};
+#endif  /* __ASM_ARCH_IMX8MN_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mp_pins.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mp_pins.h
new file mode 100644
index 000000000..e7f322182
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mp_pins.h
@@ -0,0 +1,1080 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8MP_PINS_H__
+#define __ASM_ARCH_IMX8MP_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+	MX8MP_PAD_GPIO1_IO00__GPIO1_IO00                         = IOMUX_PAD(0x0274, 0x0014, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO00__CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT = IOMUX_PAD(0x0274, 0x0014, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO00__MEDIAMIX_ISP_FL_TRIG_0             = IOMUX_PAD(0x0274, 0x0014, 3, 0x05D4, 0, 0),
+	MX8MP_PAD_GPIO1_IO00__ANAMIX_REF_CLK_32K                 = IOMUX_PAD(0x0274, 0x0014, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO00__CCMSRCGPCMIX_EXT_CLK1              = IOMUX_PAD(0x0274, 0x0014, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO00__SJC_FAIL                           = IOMUX_PAD(0x0274, 0x0014, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO01__GPIO1_IO01                         = IOMUX_PAD(0x0278, 0x0018, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO01__PWM1_OUT                           = IOMUX_PAD(0x0278, 0x0018, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO01__MEDIAMIX_ISP_SHUTTER_TRIG_0        = IOMUX_PAD(0x0278, 0x0018, 3, 0x05DC, 0, 0),
+	MX8MP_PAD_GPIO1_IO01__ANAMIX_REF_CLK_24M                 = IOMUX_PAD(0x0278, 0x0018, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO01__CCMSRCGPCMIX_EXT_CLK2              = IOMUX_PAD(0x0278, 0x0018, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO01__SJC_ACTIVE                         = IOMUX_PAD(0x0278, 0x0018, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO02__GPIO1_IO02                         = IOMUX_PAD(0x027C, 0x001C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B                       = IOMUX_PAD(0x027C, 0x001C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO02__MEDIAMIX_ISP_FLASH_TRIG_0          = IOMUX_PAD(0x027C, 0x001C, 3, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_ANY                     = IOMUX_PAD(0x027C, 0x001C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO02__SJC_DE_B                           = IOMUX_PAD(0x027C, 0x001C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO03__GPIO1_IO03                         = IOMUX_PAD(0x0280, 0x0020, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO03__USDHC1_VSELECT                     = IOMUX_PAD(0x0280, 0x0020, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO03__MEDIAMIX_ISP_PRELIGHT_TRIG_0       = IOMUX_PAD(0x0280, 0x0020, 3, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO03__SDMA1_EXT_EVENT00                  = IOMUX_PAD(0x0280, 0x0020, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO03__ANAMIX_XTAL_OK                     = IOMUX_PAD(0x0280, 0x0020, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO03__SJC_DONE                           = IOMUX_PAD(0x0280, 0x0020, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO04__GPIO1_IO04                         = IOMUX_PAD(0x0284, 0x0024, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO04__USDHC2_VSELECT                     = IOMUX_PAD(0x0284, 0x0024, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO04__MEDIAMIX_ISP_SHUTTER_OPEN_0        = IOMUX_PAD(0x0284, 0x0024, 3, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO04__SDMA1_EXT_EVENT01                  = IOMUX_PAD(0x0284, 0x0024, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO04__ANAMIX_XTAL_OK_LV                  = IOMUX_PAD(0x0284, 0x0024, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO04__USDHC1_TEST_TRIG                   = IOMUX_PAD(0x0284, 0x0024, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO05__GPIO1_IO05                         = IOMUX_PAD(0x0288, 0x0028, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO05__M7_NMI                             = IOMUX_PAD(0x0288, 0x0028, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO05__MEDIAMIX_ISP_FL_TRIG_1             = IOMUX_PAD(0x0288, 0x0028, 3, 0x05D8, 0, 0),
+	MX8MP_PAD_GPIO1_IO05__CCMSRCGPCMIX_PMIC_READY            = IOMUX_PAD(0x0288, 0x0028, 5, 0x0554, 0, 0),
+	MX8MP_PAD_GPIO1_IO05__CCMSRCGPCMIX_INT_BOOT              = IOMUX_PAD(0x0288, 0x0028, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO05__USDHC2_TEST_TRIG                   = IOMUX_PAD(0x0288, 0x0028, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO06__GPIO1_IO06                         = IOMUX_PAD(0x028C, 0x002C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO06__ENET_QOS_MDC                       = IOMUX_PAD(0x028C, 0x002C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO06__MEDIAMIX_ISP_SHUTTER_TRIG_1        = IOMUX_PAD(0x028C, 0x002C, 3, 0x05E0, 0, 0),
+	MX8MP_PAD_GPIO1_IO06__USDHC1_CD_B                        = IOMUX_PAD(0x028C, 0x002C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO06__CCMSRCGPCMIX_EXT_CLK3              = IOMUX_PAD(0x028C, 0x002C, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO06__ECSPI1_TEST_TRIG                   = IOMUX_PAD(0x028C, 0x002C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO07__GPIO1_IO07                         = IOMUX_PAD(0x0290, 0x0030, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO07__ENET_QOS_MDIO                      = IOMUX_PAD(0x0290, 0x0030, 1, 0x0590, 0, 0),
+	MX8MP_PAD_GPIO1_IO07__MEDIAMIX_ISP_FLASH_TRIG_1          = IOMUX_PAD(0x0290, 0x0030, 3, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO07__USDHC1_WP                          = IOMUX_PAD(0x0290, 0x0030, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO07__CCMSRCGPCMIX_EXT_CLK4              = IOMUX_PAD(0x0290, 0x0030, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO07__ECSPI2_TEST_TRIG                   = IOMUX_PAD(0x0290, 0x0030, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO08__GPIO1_IO08                         = IOMUX_PAD(0x0294, 0x0034, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN            = IOMUX_PAD(0x0294, 0x0034, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO08__PWM1_OUT                           = IOMUX_PAD(0x0294, 0x0034, 2, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO08__MEDIAMIX_ISP_PRELIGHT_TRIG_1       = IOMUX_PAD(0x0294, 0x0034, 3, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN        = IOMUX_PAD(0x0294, 0x0034, 4, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO08__USDHC2_RESET_B                     = IOMUX_PAD(0x0294, 0x0034, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO08__CCMSRCGPCMIX_WAIT                  = IOMUX_PAD(0x0294, 0x0034, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO08__FLEXSPI_TEST_TRIG                  = IOMUX_PAD(0x0294, 0x0034, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO09__GPIO1_IO09                         = IOMUX_PAD(0x0298, 0x0038, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT           = IOMUX_PAD(0x0298, 0x0038, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO09__PWM2_OUT                           = IOMUX_PAD(0x0298, 0x0038, 2, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO09__MEDIAMIX_ISP_SHUTTER_OPEN_1        = IOMUX_PAD(0x0298, 0x0038, 3, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO09__USDHC3_RESET_B                     = IOMUX_PAD(0x0298, 0x0038, 4, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO09__AUDIOMIX_EXT_EVENT00               = IOMUX_PAD(0x0298, 0x0038, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO09__CCMSRCGPCMIX_STOP                  = IOMUX_PAD(0x0298, 0x0038, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO09__RAWNAND_TEST_TRIG                  = IOMUX_PAD(0x0298, 0x0038, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO10__GPIO1_IO10                         = IOMUX_PAD(0x029C, 0x003C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO10__HSIOMIX_usb1_OTG_ID                = IOMUX_PAD(0x029C, 0x003C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO10__PWM3_OUT                           = IOMUX_PAD(0x029C, 0x003C, 2, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO10__OCOTP_FUSE_LATCHED                 = IOMUX_PAD(0x029C, 0x003C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO11__GPIO1_IO11                         = IOMUX_PAD(0x02A0, 0x0040, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO11__HSIOMIX_usb2_OTG_ID                = IOMUX_PAD(0x02A0, 0x0040, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO11__PWM2_OUT                           = IOMUX_PAD(0x02A0, 0x0040, 2, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO11__USDHC3_VSELECT                     = IOMUX_PAD(0x02A0, 0x0040, 4, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO11__CCMSRCGPCMIX_PMIC_READY            = IOMUX_PAD(0x02A0, 0x0040, 5, 0x0554, 1, 0),
+	MX8MP_PAD_GPIO1_IO11__CCMSRCGPCMIX_OUT0                  = IOMUX_PAD(0x02A0, 0x0040, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO11__CAAM_RNG_OSC_OBS                   = IOMUX_PAD(0x02A0, 0x0040, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO12__GPIO1_IO12                         = IOMUX_PAD(0x02A4, 0x0044, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO12__HSIOMIX_usb1_OTG_PWR               = IOMUX_PAD(0x02A4, 0x0044, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO12__AUDIOMIX_EXT_EVENT01               = IOMUX_PAD(0x02A4, 0x0044, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO12__CCMSRCGPCMIX_OUT1                  = IOMUX_PAD(0x02A4, 0x0044, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT00                = IOMUX_PAD(0x02A4, 0x0044, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO13__GPIO1_IO13                         = IOMUX_PAD(0x02A8, 0x0048, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO13__HSIOMIX_usb1_OTG_OC                = IOMUX_PAD(0x02A8, 0x0048, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO13__PWM2_OUT                           = IOMUX_PAD(0x02A8, 0x0048, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO13__CCMSRCGPCMIX_OUT2                  = IOMUX_PAD(0x02A8, 0x0048, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT01                = IOMUX_PAD(0x02A8, 0x0048, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO14__GPIO1_IO14                         = IOMUX_PAD(0x02AC, 0x004C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR               = IOMUX_PAD(0x02AC, 0x004C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO14__USDHC3_CD_B                        = IOMUX_PAD(0x02AC, 0x004C, 4, 0x0608, 0, 0),
+	MX8MP_PAD_GPIO1_IO14__PWM3_OUT                           = IOMUX_PAD(0x02AC, 0x004C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO14__CCMSRCGPCMIX_CLKO1                 = IOMUX_PAD(0x02AC, 0x004C, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO14__CSU_CSU_ALARM_AUT02                = IOMUX_PAD(0x02AC, 0x004C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_GPIO1_IO15__GPIO1_IO15                         = IOMUX_PAD(0x02B0, 0x0050, 0, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO15__HSIOMIX_usb2_OTG_OC                = IOMUX_PAD(0x02B0, 0x0050, 1, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO15__USDHC3_WP                          = IOMUX_PAD(0x02B0, 0x0050, 4, 0x0634, 0, 0),
+	MX8MP_PAD_GPIO1_IO15__PWM4_OUT                           = IOMUX_PAD(0x02B0, 0x0050, 5, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO15__CCMSRCGPCMIX_CLKO2                 = IOMUX_PAD(0x02B0, 0x0050, 6, 0x0000, 0, 0),
+	MX8MP_PAD_GPIO1_IO15__CSU_CSU_INT_DEB                    = IOMUX_PAD(0x02B0, 0x0050, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_MDC__ENET_QOS_MDC                         = IOMUX_PAD(0x02B4, 0x0054, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00              = IOMUX_PAD(0x02B4, 0x0054, 2, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_MDC__GPIO1_IO16                           = IOMUX_PAD(0x02B4, 0x0054, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_MDC__USDHC3_STROBE                        = IOMUX_PAD(0x02B4, 0x0054, 6, 0x0630, 0, 0),
+	MX8MP_PAD_ENET_MDC__SIM_M_HADDR15                        = IOMUX_PAD(0x02B4, 0x0054, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_MDIO__ENET_QOS_MDIO                       = IOMUX_PAD(0x02B8, 0x0058, 0, 0x0590, 1, 0),
+	MX8MP_PAD_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC               = IOMUX_PAD(0x02B8, 0x0058, 2, 0x0528, 0, 0),
+	MX8MP_PAD_ENET_MDIO__GPIO1_IO17                          = IOMUX_PAD(0x02B8, 0x0058, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_MDIO__USDHC3_DATA5                        = IOMUX_PAD(0x02B8, 0x0058, 6, 0x0624, 0, 0),
+	MX8MP_PAD_ENET_MDIO__SIM_M_HADDR16                       = IOMUX_PAD(0x02B8, 0x0058, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_TD3__ENET_QOS_RGMII_TD3                   = IOMUX_PAD(0x02BC, 0x005C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK                = IOMUX_PAD(0x02BC, 0x005C, 2, 0x0524, 0, 0),
+	MX8MP_PAD_ENET_TD3__GPIO1_IO18                           = IOMUX_PAD(0x02BC, 0x005C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD3__USDHC3_DATA6                         = IOMUX_PAD(0x02BC, 0x005C, 6, 0x0628, 0, 0),
+	MX8MP_PAD_ENET_TD3__SIM_M_HADDR17                        = IOMUX_PAD(0x02BC, 0x005C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_TD2__ENET_QOS_RGMII_TD2                   = IOMUX_PAD(0x02C0, 0x0060, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK  = IOMUX_PAD(0x02C0, 0x0060, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00              = IOMUX_PAD(0x02C0, 0x0060, 2, 0x051C, 0, 0),
+	MX8MP_PAD_ENET_TD2__GPIO1_IO19                           = IOMUX_PAD(0x02C0, 0x0060, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD2__USDHC3_DATA7                         = IOMUX_PAD(0x02C0, 0x0060, 6, 0x062C, 0, 0),
+	MX8MP_PAD_ENET_TD2__SIM_M_HADDR18                        = IOMUX_PAD(0x02C0, 0x0060, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_TD1__ENET_QOS_RGMII_TD1                   = IOMUX_PAD(0x02C4, 0x0064, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC                = IOMUX_PAD(0x02C4, 0x0064, 2, 0x0520, 0, 0),
+	MX8MP_PAD_ENET_TD1__GPIO1_IO20                           = IOMUX_PAD(0x02C4, 0x0064, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD1__USDHC3_CD_B                          = IOMUX_PAD(0x02C4, 0x0064, 6, 0x0608, 1, 0),
+	MX8MP_PAD_ENET_TD1__SIM_M_HADDR19                        = IOMUX_PAD(0x02C4, 0x0064, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_TD0__ENET_QOS_RGMII_TD0                   = IOMUX_PAD(0x02C8, 0x0068, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK                = IOMUX_PAD(0x02C8, 0x0068, 2, 0x0518, 0, 0),
+	MX8MP_PAD_ENET_TD0__GPIO1_IO21                           = IOMUX_PAD(0x02C8, 0x0068, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TD0__USDHC3_WP                            = IOMUX_PAD(0x02C8, 0x0068, 6, 0x0634, 1, 0),
+	MX8MP_PAD_ENET_TD0__SIM_M_HADDR20                        = IOMUX_PAD(0x02C8, 0x0068, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL             = IOMUX_PAD(0x02CC, 0x006C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK                = IOMUX_PAD(0x02CC, 0x006C, 2, 0x0514, 0, 0),
+	MX8MP_PAD_ENET_TX_CTL__AUDIOMIX_SPDIF_OUT                = IOMUX_PAD(0x02CC, 0x006C, 3, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TX_CTL__GPIO1_IO22                        = IOMUX_PAD(0x02CC, 0x006C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TX_CTL__USDHC3_DATA0                      = IOMUX_PAD(0x02CC, 0x006C, 6, 0x0610, 0, 0),
+	MX8MP_PAD_ENET_TX_CTL__SIM_M_HADDR21                     = IOMUX_PAD(0x02CC, 0x006C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK   = IOMUX_PAD(0x02D0, 0x0070, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TXC__ENET_QOS_TX_ER                       = IOMUX_PAD(0x02D0, 0x0070, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00              = IOMUX_PAD(0x02D0, 0x0070, 2, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TXC__GPIO1_IO23                           = IOMUX_PAD(0x02D0, 0x0070, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_TXC__USDHC3_DATA1                         = IOMUX_PAD(0x02D0, 0x0070, 6, 0x0614, 0, 0),
+	MX8MP_PAD_ENET_TXC__SIM_M_HADDR22                        = IOMUX_PAD(0x02D0, 0x0070, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL             = IOMUX_PAD(0x02D4, 0x0074, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC             = IOMUX_PAD(0x02D4, 0x0074, 2, 0x0540, 0, 0),
+	MX8MP_PAD_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03             = IOMUX_PAD(0x02D4, 0x0074, 3, 0x04CC, 0, 0),
+	MX8MP_PAD_ENET_RX_CTL__GPIO1_IO24                        = IOMUX_PAD(0x02D4, 0x0074, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RX_CTL__USDHC3_DATA2                      = IOMUX_PAD(0x02D4, 0x0074, 6, 0x0618, 0, 0),
+	MX8MP_PAD_ENET_RX_CTL__SIM_M_HADDR23                     = IOMUX_PAD(0x02D4, 0x0074, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK   = IOMUX_PAD(0x02D8, 0x0078, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RXC__ENET_QOS_RX_ER                       = IOMUX_PAD(0x02D8, 0x0078, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                = IOMUX_PAD(0x02D8, 0x0078, 2, 0x053C, 0, 0),
+	MX8MP_PAD_ENET_RXC__AUDIOMIX_BIT_STREAM02                = IOMUX_PAD(0x02D8, 0x0078, 3, 0x04C8, 0, 0),
+	MX8MP_PAD_ENET_RXC__GPIO1_IO25                           = IOMUX_PAD(0x02D8, 0x0078, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RXC__USDHC3_DATA3                         = IOMUX_PAD(0x02D8, 0x0078, 6, 0x061C, 0, 0),
+	MX8MP_PAD_ENET_RXC__SIM_M_HADDR24                        = IOMUX_PAD(0x02D8, 0x0078, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_RD0__ENET_QOS_RGMII_RD0                   = IOMUX_PAD(0x02DC, 0x007C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00              = IOMUX_PAD(0x02DC, 0x007C, 2, 0x0534, 0, 0),
+	MX8MP_PAD_ENET_RD0__AUDIOMIX_BIT_STREAM01                = IOMUX_PAD(0x02DC, 0x007C, 3, 0x04C4, 0, 0),
+	MX8MP_PAD_ENET_RD0__GPIO1_IO26                           = IOMUX_PAD(0x02DC, 0x007C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD0__USDHC3_DATA4                         = IOMUX_PAD(0x02DC, 0x007C, 6, 0x0620, 0, 0),
+	MX8MP_PAD_ENET_RD0__SIM_M_HADDR25                        = IOMUX_PAD(0x02DC, 0x007C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_RD1__ENET_QOS_RGMII_RD1                   = IOMUX_PAD(0x02E0, 0x0080, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                = IOMUX_PAD(0x02E0, 0x0080, 2, 0x0538, 0, 0),
+	MX8MP_PAD_ENET_RD1__AUDIOMIX_BIT_STREAM00                = IOMUX_PAD(0x02E0, 0x0080, 3, 0x04C0, 0, 0),
+	MX8MP_PAD_ENET_RD1__GPIO1_IO27                           = IOMUX_PAD(0x02E0, 0x0080, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD1__USDHC3_RESET_B                       = IOMUX_PAD(0x02E0, 0x0080, 6, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD1__SIM_M_HADDR26                        = IOMUX_PAD(0x02E0, 0x0080, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_RD2__ENET_QOS_RGMII_RD2                   = IOMUX_PAD(0x02E4, 0x0084, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK                = IOMUX_PAD(0x02E4, 0x0084, 2, 0x0530, 0, 0),
+	MX8MP_PAD_ENET_RD2__AUDIOMIX_CLK                         = IOMUX_PAD(0x02E4, 0x0084, 3, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD2__GPIO1_IO28                           = IOMUX_PAD(0x02E4, 0x0084, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD2__USDHC3_CLK                           = IOMUX_PAD(0x02E4, 0x0084, 6, 0x0604, 0, 0),
+	MX8MP_PAD_ENET_RD2__SIM_M_HADDR27                        = IOMUX_PAD(0x02E4, 0x0084, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ENET_RD3__ENET_QOS_RGMII_RD3                   = IOMUX_PAD(0x02E8, 0x0088, 0, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD3__AUDIOMIX_SAI7_MCLK                   = IOMUX_PAD(0x02E8, 0x0088, 2, 0x052C, 0, 0),
+	MX8MP_PAD_ENET_RD3__AUDIOMIX_SPDIF_IN                    = IOMUX_PAD(0x02E8, 0x0088, 3, 0x0544, 0, 0),
+	MX8MP_PAD_ENET_RD3__GPIO1_IO29                           = IOMUX_PAD(0x02E8, 0x0088, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ENET_RD3__USDHC3_CMD                           = IOMUX_PAD(0x02E8, 0x0088, 6, 0x060C, 0, 0),
+	MX8MP_PAD_ENET_RD3__SIM_M_HADDR28                        = IOMUX_PAD(0x02E8, 0x0088, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_CLK__USDHC1_CLK                            = IOMUX_PAD(0x02EC, 0x008C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_CLK__ENET1_MDC                             = IOMUX_PAD(0x02EC, 0x008C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_CLK__I2C5_SCL                              = IOMUX_PAD(0x02EC, 0x008C, 3 | IOMUX_CONFIG_SION, 0x05C4, 0, 0),
+	MX8MP_PAD_SD1_CLK__UART1_DCE_TX                          = IOMUX_PAD(0x02EC, 0x008C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_CLK__UART1_DTE_RX                          = IOMUX_PAD(0x02EC, 0x008C, 4, 0x05E8, 0, 0),
+	MX8MP_PAD_SD1_CLK__GPIO2_IO00                            = IOMUX_PAD(0x02EC, 0x008C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_CLK__SIM_M_HADDR29                         = IOMUX_PAD(0x02EC, 0x008C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_CMD__USDHC1_CMD                            = IOMUX_PAD(0x02F0, 0x0090, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_CMD__ENET1_MDIO                            = IOMUX_PAD(0x02F0, 0x0090, 1, 0x057C, 0, 0),
+	MX8MP_PAD_SD1_CMD__I2C5_SDA                              = IOMUX_PAD(0x02F0, 0x0090, 3 | IOMUX_CONFIG_SION, 0x05C8, 0, 0),
+	MX8MP_PAD_SD1_CMD__UART1_DCE_RX                          = IOMUX_PAD(0x02F0, 0x0090, 4, 0x05E8, 1, 0),
+	MX8MP_PAD_SD1_CMD__UART1_DTE_TX                          = IOMUX_PAD(0x02F0, 0x0090, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_CMD__GPIO2_IO01                            = IOMUX_PAD(0x02F0, 0x0090, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_CMD__SIM_M_HADDR30                         = IOMUX_PAD(0x02F0, 0x0090, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_DATA0__USDHC1_DATA0                        = IOMUX_PAD(0x02F4, 0x0094, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA0__ENET1_RGMII_TD1                     = IOMUX_PAD(0x02F4, 0x0094, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA0__I2C6_SCL                            = IOMUX_PAD(0x02F4, 0x0094, 3 | IOMUX_CONFIG_SION, 0x05CC, 0, 0),
+	MX8MP_PAD_SD1_DATA0__UART1_DCE_RTS                       = IOMUX_PAD(0x02F4, 0x0094, 4, 0x05E4, 0, 0),
+	MX8MP_PAD_SD1_DATA0__UART1_DTE_CTS                       = IOMUX_PAD(0x02F4, 0x0094, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA0__GPIO2_IO02                          = IOMUX_PAD(0x02F4, 0x0094, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA0__SIM_M_HADDR31                       = IOMUX_PAD(0x02F4, 0x0094, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_DATA1__USDHC1_DATA1                        = IOMUX_PAD(0x02F8, 0x0098, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA1__ENET1_RGMII_TD0                     = IOMUX_PAD(0x02F8, 0x0098, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA1__I2C6_SDA                            = IOMUX_PAD(0x02F8, 0x0098, 3 | IOMUX_CONFIG_SION, 0x05D0, 0, 0),
+	MX8MP_PAD_SD1_DATA1__UART1_DCE_CTS                       = IOMUX_PAD(0x02F8, 0x0098, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA1__UART1_DTE_RTS                       = IOMUX_PAD(0x02F8, 0x0098, 4, 0x05E4, 1, 0),
+	MX8MP_PAD_SD1_DATA1__GPIO2_IO03                          = IOMUX_PAD(0x02F8, 0x0098, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA1__SIM_M_HBURST00                      = IOMUX_PAD(0x02F8, 0x0098, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_DATA2__USDHC1_DATA2                        = IOMUX_PAD(0x02FC, 0x009C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA2__ENET1_RGMII_RD0                     = IOMUX_PAD(0x02FC, 0x009C, 1, 0x0580, 0, 0),
+	MX8MP_PAD_SD1_DATA2__I2C4_SCL                            = IOMUX_PAD(0x02FC, 0x009C, 3 | IOMUX_CONFIG_SION, 0x05BC, 0, 0),
+	MX8MP_PAD_SD1_DATA2__UART2_DCE_TX                        = IOMUX_PAD(0x02FC, 0x009C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA2__UART2_DTE_RX                        = IOMUX_PAD(0x02FC, 0x009C, 4, 0x05F0, 0, 0),
+	MX8MP_PAD_SD1_DATA2__GPIO2_IO04                          = IOMUX_PAD(0x02FC, 0x009C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA2__SIM_M_HBURST01                      = IOMUX_PAD(0x02FC, 0x009C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_DATA3__USDHC1_DATA3                        = IOMUX_PAD(0x0300, 0x00A0, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA3__ENET1_RGMII_RD1                     = IOMUX_PAD(0x0300, 0x00A0, 1, 0x0584, 0, 0),
+	MX8MP_PAD_SD1_DATA3__I2C4_SDA                            = IOMUX_PAD(0x0300, 0x00A0, 3 | IOMUX_CONFIG_SION, 0x05C0, 0, 0),
+	MX8MP_PAD_SD1_DATA3__UART2_DCE_RX                        = IOMUX_PAD(0x0300, 0x00A0, 4, 0x05F0, 1, 0),
+	MX8MP_PAD_SD1_DATA3__UART2_DTE_TX                        = IOMUX_PAD(0x0300, 0x00A0, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA3__GPIO2_IO05                          = IOMUX_PAD(0x0300, 0x00A0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA3__SIM_M_HBURST02                      = IOMUX_PAD(0x0300, 0x00A0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_DATA4__USDHC1_DATA4                        = IOMUX_PAD(0x0304, 0x00A4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA4__ENET1_RGMII_TX_CTL                  = IOMUX_PAD(0x0304, 0x00A4, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA4__I2C1_SCL                            = IOMUX_PAD(0x0304, 0x00A4, 3 | IOMUX_CONFIG_SION, 0x05A4, 0, 0),
+	MX8MP_PAD_SD1_DATA4__UART2_DCE_RTS                       = IOMUX_PAD(0x0304, 0x00A4, 4, 0x05EC, 0, 0),
+	MX8MP_PAD_SD1_DATA4__UART2_DTE_CTS                       = IOMUX_PAD(0x0304, 0x00A4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA4__GPIO2_IO06                          = IOMUX_PAD(0x0304, 0x00A4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA4__SIM_M_HRESP                         = IOMUX_PAD(0x0304, 0x00A4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_DATA5__USDHC1_DATA5                        = IOMUX_PAD(0x0308, 0x00A8, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA5__ENET1_TX_ER                         = IOMUX_PAD(0x0308, 0x00A8, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA5__I2C1_SDA                            = IOMUX_PAD(0x0308, 0x00A8, 3 | IOMUX_CONFIG_SION, 0x05A8, 0, 0),
+	MX8MP_PAD_SD1_DATA5__UART2_DCE_CTS                       = IOMUX_PAD(0x0308, 0x00A8, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA5__UART2_DTE_RTS                       = IOMUX_PAD(0x0308, 0x00A8, 4, 0x05EC, 1, 0),
+	MX8MP_PAD_SD1_DATA5__GPIO2_IO07                          = IOMUX_PAD(0x0308, 0x00A8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA5__TPSMP_HDATA05                       = IOMUX_PAD(0x0308, 0x00A8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_DATA6__USDHC1_DATA6                        = IOMUX_PAD(0x030C, 0x00AC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA6__ENET1_RGMII_RX_CTL                  = IOMUX_PAD(0x030C, 0x00AC, 1, 0x0588, 0, 0),
+	MX8MP_PAD_SD1_DATA6__I2C2_SCL                            = IOMUX_PAD(0x030C, 0x00AC, 3 | IOMUX_CONFIG_SION, 0x05AC, 0, 0),
+	MX8MP_PAD_SD1_DATA6__UART3_DCE_TX                        = IOMUX_PAD(0x030C, 0x00AC, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA6__UART3_DTE_RX                        = IOMUX_PAD(0x030C, 0x00AC, 4, 0x05F8, 0, 0),
+	MX8MP_PAD_SD1_DATA6__GPIO2_IO08                          = IOMUX_PAD(0x030C, 0x00AC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA6__TPSMP_HDATA06                       = IOMUX_PAD(0x030C, 0x00AC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_DATA7__USDHC1_DATA7                        = IOMUX_PAD(0x0310, 0x00B0, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA7__ENET1_RX_ER                         = IOMUX_PAD(0x0310, 0x00B0, 1, 0x058C, 0, 0),
+	MX8MP_PAD_SD1_DATA7__I2C2_SDA                            = IOMUX_PAD(0x0310, 0x00B0, 3 | IOMUX_CONFIG_SION, 0x05B0, 0, 0),
+	MX8MP_PAD_SD1_DATA7__UART3_DCE_RX                        = IOMUX_PAD(0x0310, 0x00B0, 4, 0x05F8, 1, 0),
+	MX8MP_PAD_SD1_DATA7__UART3_DTE_TX                        = IOMUX_PAD(0x0310, 0x00B0, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA7__GPIO2_IO09                          = IOMUX_PAD(0x0310, 0x00B0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_DATA7__TPSMP_HDATA07                       = IOMUX_PAD(0x0310, 0x00B0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_RESET_B__USDHC1_RESET_B                    = IOMUX_PAD(0x0314, 0x00B4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_RESET_B__ENET1_TX_CLK                      = IOMUX_PAD(0x0314, 0x00B4, 1, 0x0578, 0, 0),
+	MX8MP_PAD_SD1_RESET_B__I2C3_SCL                          = IOMUX_PAD(0x0314, 0x00B4, 3 | IOMUX_CONFIG_SION, 0x05B4, 0, 0),
+	MX8MP_PAD_SD1_RESET_B__UART3_DCE_RTS                     = IOMUX_PAD(0x0314, 0x00B4, 4, 0x05F4, 0, 0),
+	MX8MP_PAD_SD1_RESET_B__UART3_DTE_CTS                     = IOMUX_PAD(0x0314, 0x00B4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_RESET_B__GPIO2_IO10                        = IOMUX_PAD(0x0314, 0x00B4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_RESET_B__ECSPI3_TEST_TRIG                  = IOMUX_PAD(0x0314, 0x00B4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD1_STROBE__USDHC1_STROBE                      = IOMUX_PAD(0x0318, 0x00B8, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_STROBE__I2C3_SDA                           = IOMUX_PAD(0x0318, 0x00B8, 3 | IOMUX_CONFIG_SION, 0x05B8, 0, 0),
+	MX8MP_PAD_SD1_STROBE__UART3_DCE_CTS                      = IOMUX_PAD(0x0318, 0x00B8, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_STROBE__UART3_DTE_RTS                      = IOMUX_PAD(0x0318, 0x00B8, 4, 0x05F4, 1, 0),
+	MX8MP_PAD_SD1_STROBE__GPIO2_IO11                         = IOMUX_PAD(0x0318, 0x00B8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD1_STROBE__USDHC3_TEST_TRIG                   = IOMUX_PAD(0x0318, 0x00B8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_CD_B__USDHC2_CD_B                          = IOMUX_PAD(0x031C, 0x00BC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CD_B__GPIO2_IO12                           = IOMUX_PAD(0x031C, 0x00BC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CD_B__CCMSRCGPCMIX_TESTER_ACK              = IOMUX_PAD(0x031C, 0x00BC, 6, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_CLK__USDHC2_CLK                            = IOMUX_PAD(0x0320, 0x00C0, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CLK__ECSPI2_SCLK                           = IOMUX_PAD(0x0320, 0x00C0, 2, 0x0568, 0, 0),
+	MX8MP_PAD_SD2_CLK__UART4_DCE_RX                          = IOMUX_PAD(0x0320, 0x00C0, 3, 0x0600, 0, 0),
+	MX8MP_PAD_SD2_CLK__UART4_DTE_TX                          = IOMUX_PAD(0x0320, 0x00C0, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CLK__GPIO2_IO13                            = IOMUX_PAD(0x0320, 0x00C0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                 = IOMUX_PAD(0x0320, 0x00C0, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CLK__OBSERVE_MUX_OUT00                     = IOMUX_PAD(0x0320, 0x00C0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_CMD__USDHC2_CMD                            = IOMUX_PAD(0x0324, 0x00C4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CMD__ECSPI2_MOSI                           = IOMUX_PAD(0x0324, 0x00C4, 2, 0x0570, 0, 0),
+	MX8MP_PAD_SD2_CMD__UART4_DCE_TX                          = IOMUX_PAD(0x0324, 0x00C4, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CMD__UART4_DTE_RX                          = IOMUX_PAD(0x0324, 0x00C4, 3, 0x0600, 1, 0),
+	MX8MP_PAD_SD2_CMD__AUDIOMIX_CLK                          = IOMUX_PAD(0x0324, 0x00C4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CMD__GPIO2_IO14                            = IOMUX_PAD(0x0324, 0x00C4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                 = IOMUX_PAD(0x0324, 0x00C4, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_CMD__OBSERVE_MUX_OUT01                     = IOMUX_PAD(0x0324, 0x00C4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_DATA0__USDHC2_DATA0                        = IOMUX_PAD(0x0328, 0x00C8, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA0__I2C4_SDA                            = IOMUX_PAD(0x0328, 0x00C8, 2 | IOMUX_CONFIG_SION, 0x05C0, 1, 0),
+	MX8MP_PAD_SD2_DATA0__UART2_DCE_RX                        = IOMUX_PAD(0x0328, 0x00C8, 3, 0x05F0, 2, 0),
+	MX8MP_PAD_SD2_DATA0__UART2_DTE_TX                        = IOMUX_PAD(0x0328, 0x00C8, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA0__AUDIOMIX_BIT_STREAM00               = IOMUX_PAD(0x0328, 0x00C8, 4, 0x04C0, 1, 0),
+	MX8MP_PAD_SD2_DATA0__GPIO2_IO15                          = IOMUX_PAD(0x0328, 0x00C8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2               = IOMUX_PAD(0x0328, 0x00C8, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA0__OBSERVE_MUX_OUT02                   = IOMUX_PAD(0x0328, 0x00C8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_DATA1__USDHC2_DATA1                        = IOMUX_PAD(0x032C, 0x00CC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA1__I2C4_SCL                            = IOMUX_PAD(0x032C, 0x00CC, 2 | IOMUX_CONFIG_SION, 0x05BC, 1, 0),
+	MX8MP_PAD_SD2_DATA1__UART2_DCE_TX                        = IOMUX_PAD(0x032C, 0x00CC, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA1__UART2_DTE_RX                        = IOMUX_PAD(0x032C, 0x00CC, 3, 0x05F0, 3, 0),
+	MX8MP_PAD_SD2_DATA1__AUDIOMIX_BIT_STREAM01               = IOMUX_PAD(0x032C, 0x00CC, 4, 0x04C4, 1, 0),
+	MX8MP_PAD_SD2_DATA1__GPIO2_IO16                          = IOMUX_PAD(0x032C, 0x00CC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT                   = IOMUX_PAD(0x032C, 0x00CC, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA1__OBSERVE_MUX_OUT03                   = IOMUX_PAD(0x032C, 0x00CC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_DATA2__USDHC2_DATA2                        = IOMUX_PAD(0x0330, 0x00D0, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA2__ECSPI2_SS0                          = IOMUX_PAD(0x0330, 0x00D0, 2, 0x0574, 0, 0),
+	MX8MP_PAD_SD2_DATA2__AUDIOMIX_SPDIF_OUT                  = IOMUX_PAD(0x0330, 0x00D0, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA2__AUDIOMIX_BIT_STREAM02               = IOMUX_PAD(0x0330, 0x00D0, 4, 0x04C8, 1, 0),
+	MX8MP_PAD_SD2_DATA2__GPIO2_IO17                          = IOMUX_PAD(0x0330, 0x00D0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP                   = IOMUX_PAD(0x0330, 0x00D0, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA2__OBSERVE_MUX_OUT04                   = IOMUX_PAD(0x0330, 0x00D0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_DATA3__USDHC2_DATA3                        = IOMUX_PAD(0x0334, 0x00D4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA3__ECSPI2_MISO                         = IOMUX_PAD(0x0334, 0x00D4, 2, 0x056C, 0, 0),
+	MX8MP_PAD_SD2_DATA3__AUDIOMIX_SPDIF_IN                   = IOMUX_PAD(0x0334, 0x00D4, 3, 0x0544, 1, 0),
+	MX8MP_PAD_SD2_DATA3__AUDIOMIX_BIT_STREAM03               = IOMUX_PAD(0x0334, 0x00D4, 4, 0x04CC, 1, 0),
+	MX8MP_PAD_SD2_DATA3__GPIO2_IO18                          = IOMUX_PAD(0x0334, 0x00D4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET            = IOMUX_PAD(0x0334, 0x00D4, 6, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_RESET_B__USDHC2_RESET_B                    = IOMUX_PAD(0x0338, 0x00D8, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_RESET_B__GPIO2_IO19                        = IOMUX_PAD(0x0338, 0x00D8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET         = IOMUX_PAD(0x0338, 0x00D8, 6, 0x0000, 0, 0),
+
+	MX8MP_PAD_SD2_WP__USDHC2_WP                              = IOMUX_PAD(0x033C, 0x00DC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_WP__GPIO2_IO20                             = IOMUX_PAD(0x033C, 0x00DC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_WP__CORESIGHT_EVENTI                       = IOMUX_PAD(0x033C, 0x00DC, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SD2_WP__SIM_M_HMASTLOCK                        = IOMUX_PAD(0x033C, 0x00DC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_ALE__RAWNAND_ALE                          = IOMUX_PAD(0x0340, 0x00E0, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_ALE__FLEXSPI_A_SCLK                       = IOMUX_PAD(0x0340, 0x00E0, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK                = IOMUX_PAD(0x0340, 0x00E0, 2, 0x04E8, 0, 0),
+	MX8MP_PAD_NAND_ALE__MEDIAMIX_ISP_FL_TRIG_0               = IOMUX_PAD(0x0340, 0x00E0, 3, 0x05D4, 1, 0),
+	MX8MP_PAD_NAND_ALE__UART3_DCE_RX                         = IOMUX_PAD(0x0340, 0x00E0, 4, 0x05F8, 2, 0),
+	MX8MP_PAD_NAND_ALE__UART3_DTE_TX                         = IOMUX_PAD(0x0340, 0x00E0, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_ALE__GPIO3_IO00                           = IOMUX_PAD(0x0340, 0x00E0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_ALE__CORESIGHT_TRACE_CLK                  = IOMUX_PAD(0x0340, 0x00E0, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_ALE__SIM_M_HPROT00                        = IOMUX_PAD(0x0340, 0x00E0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_CE0_B__RAWNAND_CE0_B                      = IOMUX_PAD(0x0344, 0x00E4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE0_B__FLEXSPI_A_SS0_B                    = IOMUX_PAD(0x0344, 0x00E4, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00            = IOMUX_PAD(0x0344, 0x00E4, 2, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE0_B__MEDIAMIX_ISP_SHUTTER_TRIG_0        = IOMUX_PAD(0x0344, 0x00E4, 3, 0x05DC, 1, 0),
+	MX8MP_PAD_NAND_CE0_B__UART3_DCE_TX                       = IOMUX_PAD(0x0344, 0x00E4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE0_B__UART3_DTE_RX                       = IOMUX_PAD(0x0344, 0x00E4, 4, 0x05F8, 3, 0),
+	MX8MP_PAD_NAND_CE0_B__GPIO3_IO01                         = IOMUX_PAD(0x0344, 0x00E4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE0_B__CORESIGHT_TRACE_CTL                = IOMUX_PAD(0x0344, 0x00E4, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE0_B__SIM_M_HPROT01                      = IOMUX_PAD(0x0344, 0x00E4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_CE1_B__RAWNAND_CE1_B                      = IOMUX_PAD(0x0348, 0x00E8, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE1_B__FLEXSPI_A_SS1_B                    = IOMUX_PAD(0x0348, 0x00E8, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE1_B__USDHC3_STROBE                      = IOMUX_PAD(0x0348, 0x00E8, 2, 0x0630, 1, 0),
+	MX8MP_PAD_NAND_CE1_B__I2C4_SCL                           = IOMUX_PAD(0x0348, 0x00E8, 4 | IOMUX_CONFIG_SION, 0x05BC, 2, 0),
+	MX8MP_PAD_NAND_CE1_B__GPIO3_IO02                         = IOMUX_PAD(0x0348, 0x00E8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE1_B__CORESIGHT_TRACE00                  = IOMUX_PAD(0x0348, 0x00E8, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE1_B__SIM_M_HPROT02                      = IOMUX_PAD(0x0348, 0x00E8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_CE2_B__RAWNAND_CE2_B                      = IOMUX_PAD(0x034C, 0x00EC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE2_B__FLEXSPI_B_SS0_B                    = IOMUX_PAD(0x034C, 0x00EC, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE2_B__USDHC3_DATA5                       = IOMUX_PAD(0x034C, 0x00EC, 2, 0x0624, 1, 0),
+	MX8MP_PAD_NAND_CE2_B__I2C4_SDA                           = IOMUX_PAD(0x034C, 0x00EC, 4 | IOMUX_CONFIG_SION, 0x05C0, 2, 0),
+	MX8MP_PAD_NAND_CE2_B__GPIO3_IO03                         = IOMUX_PAD(0x034C, 0x00EC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE2_B__CORESIGHT_TRACE01                  = IOMUX_PAD(0x034C, 0x00EC, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE2_B__SIM_M_HPROT03                      = IOMUX_PAD(0x034C, 0x00EC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_CE3_B__RAWNAND_CE3_B                      = IOMUX_PAD(0x0350, 0x00F0, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE3_B__FLEXSPI_B_SS1_B                    = IOMUX_PAD(0x0350, 0x00F0, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE3_B__USDHC3_DATA6                       = IOMUX_PAD(0x0350, 0x00F0, 2, 0x0628, 1, 0),
+	MX8MP_PAD_NAND_CE3_B__I2C3_SDA                           = IOMUX_PAD(0x0350, 0x00F0, 4 | IOMUX_CONFIG_SION, 0x05B8, 1, 0),
+	MX8MP_PAD_NAND_CE3_B__GPIO3_IO04                         = IOMUX_PAD(0x0350, 0x00F0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE3_B__CORESIGHT_TRACE02                  = IOMUX_PAD(0x0350, 0x00F0, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CE3_B__SIM_M_HADDR00                      = IOMUX_PAD(0x0350, 0x00F0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_CLE__RAWNAND_CLE                          = IOMUX_PAD(0x0354, 0x00F4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CLE__FLEXSPI_B_SCLK                       = IOMUX_PAD(0x0354, 0x00F4, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CLE__USDHC3_DATA7                         = IOMUX_PAD(0x0354, 0x00F4, 2, 0x062C, 1, 0),
+	MX8MP_PAD_NAND_CLE__UART4_DCE_RX                         = IOMUX_PAD(0x0354, 0x00F4, 4, 0x0600, 2, 0),
+	MX8MP_PAD_NAND_CLE__UART4_DTE_TX                         = IOMUX_PAD(0x0354, 0x00F4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CLE__GPIO3_IO05                           = IOMUX_PAD(0x0354, 0x00F4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CLE__CORESIGHT_TRACE03                    = IOMUX_PAD(0x0354, 0x00F4, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_CLE__SIM_M_HADDR01                        = IOMUX_PAD(0x0354, 0x00F4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DATA00__RAWNAND_DATA00                    = IOMUX_PAD(0x0358, 0x00F8, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA00__FLEXSPI_A_DATA00                  = IOMUX_PAD(0x0358, 0x00F8, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00           = IOMUX_PAD(0x0358, 0x00F8, 2, 0x04E4, 0, 0),
+	MX8MP_PAD_NAND_DATA00__MEDIAMIX_ISP_FLASH_TRIG_0         = IOMUX_PAD(0x0358, 0x00F8, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA00__UART4_DCE_RX                      = IOMUX_PAD(0x0358, 0x00F8, 4, 0x0600, 3, 0),
+	MX8MP_PAD_NAND_DATA00__UART4_DTE_TX                      = IOMUX_PAD(0x0358, 0x00F8, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA00__GPIO3_IO06                        = IOMUX_PAD(0x0358, 0x00F8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA00__CORESIGHT_TRACE04                 = IOMUX_PAD(0x0358, 0x00F8, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA00__SIM_M_HADDR02                     = IOMUX_PAD(0x0358, 0x00F8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DATA01__RAWNAND_DATA01                    = IOMUX_PAD(0x035C, 0x00FC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA01__FLEXSPI_A_DATA01                  = IOMUX_PAD(0x035C, 0x00FC, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC             = IOMUX_PAD(0x035C, 0x00FC, 2, 0x04EC, 0, 0),
+	MX8MP_PAD_NAND_DATA01__MEDIAMIX_ISP_PRELIGHT_TRIG_0      = IOMUX_PAD(0x035C, 0x00FC, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA01__UART4_DCE_TX                      = IOMUX_PAD(0x035C, 0x00FC, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA01__UART4_DTE_RX                      = IOMUX_PAD(0x035C, 0x00FC, 4, 0x0600, 4, 0),
+	MX8MP_PAD_NAND_DATA01__GPIO3_IO07                        = IOMUX_PAD(0x035C, 0x00FC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA01__CORESIGHT_TRACE05                 = IOMUX_PAD(0x035C, 0x00FC, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA01__SIM_M_HADDR03                     = IOMUX_PAD(0x035C, 0x00FC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DATA02__RAWNAND_DATA02                    = IOMUX_PAD(0x0360, 0x0100, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA02__FLEXSPI_A_DATA02                  = IOMUX_PAD(0x0360, 0x0100, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA02__USDHC3_CD_B                       = IOMUX_PAD(0x0360, 0x0100, 2, 0x0608, 2, 0),
+	MX8MP_PAD_NAND_DATA02__UART4_DCE_CTS                     = IOMUX_PAD(0x0360, 0x0100, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA02__UART4_DTE_RTS                     = IOMUX_PAD(0x0360, 0x0100, 3, 0x05FC, 0, 0),
+	MX8MP_PAD_NAND_DATA02__I2C4_SDA                          = IOMUX_PAD(0x0360, 0x0100, 4 | IOMUX_CONFIG_SION, 0x05C0, 3, 0),
+	MX8MP_PAD_NAND_DATA02__GPIO3_IO08                        = IOMUX_PAD(0x0360, 0x0100, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA02__CORESIGHT_TRACE06                 = IOMUX_PAD(0x0360, 0x0100, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA02__SIM_M_HADDR04                     = IOMUX_PAD(0x0360, 0x0100, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DATA03__RAWNAND_DATA03                    = IOMUX_PAD(0x0364, 0x0104, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA03__FLEXSPI_A_DATA03                  = IOMUX_PAD(0x0364, 0x0104, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA03__USDHC3_WP                         = IOMUX_PAD(0x0364, 0x0104, 2, 0x0634, 2, 0),
+	MX8MP_PAD_NAND_DATA03__UART4_DCE_RTS                     = IOMUX_PAD(0x0364, 0x0104, 3, 0x05FC, 1, 0),
+	MX8MP_PAD_NAND_DATA03__UART4_DTE_CTS                     = IOMUX_PAD(0x0364, 0x0104, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA03__MEDIAMIX_ISP_FL_TRIG_1            = IOMUX_PAD(0x0364, 0x0104, 4, 0x05D8, 1, 0),
+	MX8MP_PAD_NAND_DATA03__GPIO3_IO09                        = IOMUX_PAD(0x0364, 0x0104, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA03__CORESIGHT_TRACE07                 = IOMUX_PAD(0x0364, 0x0104, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA03__SIM_M_HADDR05                     = IOMUX_PAD(0x0364, 0x0104, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DATA04__RAWNAND_DATA04                    = IOMUX_PAD(0x0368, 0x0108, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA04__FLEXSPI_B_DATA00                  = IOMUX_PAD(0x0368, 0x0108, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA04__USDHC3_DATA0                      = IOMUX_PAD(0x0368, 0x0108, 2, 0x0610, 1, 0),
+	MX8MP_PAD_NAND_DATA04__FLEXSPI_A_DATA04                  = IOMUX_PAD(0x0368, 0x0108, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA04__MEDIAMIX_ISP_SHUTTER_TRIG_1       = IOMUX_PAD(0x0368, 0x0108, 4, 0x05E0, 1, 0),
+	MX8MP_PAD_NAND_DATA04__GPIO3_IO10                        = IOMUX_PAD(0x0368, 0x0108, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA04__CORESIGHT_TRACE08                 = IOMUX_PAD(0x0368, 0x0108, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA04__SIM_M_HADDR06                     = IOMUX_PAD(0x0368, 0x0108, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DATA05__RAWNAND_DATA05                    = IOMUX_PAD(0x036C, 0x010C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA05__FLEXSPI_B_DATA01                  = IOMUX_PAD(0x036C, 0x010C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA05__USDHC3_DATA1                      = IOMUX_PAD(0x036C, 0x010C, 2, 0x0614, 1, 0),
+	MX8MP_PAD_NAND_DATA05__FLEXSPI_A_DATA05                  = IOMUX_PAD(0x036C, 0x010C, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA05__MEDIAMIX_ISP_FLASH_TRIG_1         = IOMUX_PAD(0x036C, 0x010C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA05__GPIO3_IO11                        = IOMUX_PAD(0x036C, 0x010C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA05__CORESIGHT_TRACE09                 = IOMUX_PAD(0x036C, 0x010C, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA05__SIM_M_HADDR07                     = IOMUX_PAD(0x036C, 0x010C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DATA06__RAWNAND_DATA06                    = IOMUX_PAD(0x0370, 0x0110, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA06__FLEXSPI_B_DATA02                  = IOMUX_PAD(0x0370, 0x0110, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA06__USDHC3_DATA2                      = IOMUX_PAD(0x0370, 0x0110, 2, 0x0618, 1, 0),
+	MX8MP_PAD_NAND_DATA06__FLEXSPI_A_DATA06                  = IOMUX_PAD(0x0370, 0x0110, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA06__MEDIAMIX_ISP_PRELIGHT_TRIG_1      = IOMUX_PAD(0x0370, 0x0110, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA06__GPIO3_IO12                        = IOMUX_PAD(0x0370, 0x0110, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA06__CORESIGHT_TRACE10                 = IOMUX_PAD(0x0370, 0x0110, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA06__SIM_M_HADDR08                     = IOMUX_PAD(0x0370, 0x0110, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DATA07__RAWNAND_DATA07                    = IOMUX_PAD(0x0374, 0x0114, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA07__FLEXSPI_B_DATA03                  = IOMUX_PAD(0x0374, 0x0114, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA07__USDHC3_DATA3                      = IOMUX_PAD(0x0374, 0x0114, 2, 0x061C, 1, 0),
+	MX8MP_PAD_NAND_DATA07__FLEXSPI_A_DATA07                  = IOMUX_PAD(0x0374, 0x0114, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA07__MEDIAMIX_ISP_SHUTTER_OPEN_1       = IOMUX_PAD(0x0374, 0x0114, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA07__GPIO3_IO13                        = IOMUX_PAD(0x0374, 0x0114, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA07__CORESIGHT_TRACE11                 = IOMUX_PAD(0x0374, 0x0114, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DATA07__SIM_M_HADDR09                     = IOMUX_PAD(0x0374, 0x0114, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_DQS__RAWNAND_DQS                          = IOMUX_PAD(0x0378, 0x0118, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DQS__FLEXSPI_A_DQS                        = IOMUX_PAD(0x0378, 0x0118, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DQS__AUDIOMIX_SAI3_MCLK                   = IOMUX_PAD(0x0378, 0x0118, 2, 0x04E0, 0, 0),
+	MX8MP_PAD_NAND_DQS__MEDIAMIX_ISP_SHUTTER_OPEN_0          = IOMUX_PAD(0x0378, 0x0118, 3, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DQS__I2C3_SCL                             = IOMUX_PAD(0x0378, 0x0118, 4 | IOMUX_CONFIG_SION, 0x05B4, 1, 0),
+	MX8MP_PAD_NAND_DQS__GPIO3_IO14                           = IOMUX_PAD(0x0378, 0x0118, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DQS__CORESIGHT_TRACE12                    = IOMUX_PAD(0x0378, 0x0118, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_DQS__SIM_M_HADDR10                        = IOMUX_PAD(0x0378, 0x0118, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_RE_B__RAWNAND_RE_B                        = IOMUX_PAD(0x037C, 0x011C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_RE_B__FLEXSPI_B_DQS                       = IOMUX_PAD(0x037C, 0x011C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_RE_B__USDHC3_DATA4                        = IOMUX_PAD(0x037C, 0x011C, 2, 0x0620, 1, 0),
+	MX8MP_PAD_NAND_RE_B__UART4_DCE_TX                        = IOMUX_PAD(0x037C, 0x011C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_RE_B__UART4_DTE_RX                        = IOMUX_PAD(0x037C, 0x011C, 4, 0x0600, 5, 0),
+	MX8MP_PAD_NAND_RE_B__GPIO3_IO15                          = IOMUX_PAD(0x037C, 0x011C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_RE_B__CORESIGHT_TRACE13                   = IOMUX_PAD(0x037C, 0x011C, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_RE_B__SIM_M_HADDR11                       = IOMUX_PAD(0x037C, 0x011C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_READY_B__RAWNAND_READY_B                  = IOMUX_PAD(0x0380, 0x0120, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_READY_B__USDHC3_RESET_B                   = IOMUX_PAD(0x0380, 0x0120, 2, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_READY_B__I2C3_SCL                         = IOMUX_PAD(0x0380, 0x0120, 4 | IOMUX_CONFIG_SION, 0x05B4, 2, 0),
+	MX8MP_PAD_NAND_READY_B__GPIO3_IO16                       = IOMUX_PAD(0x0380, 0x0120, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_READY_B__CORESIGHT_TRACE14                = IOMUX_PAD(0x0380, 0x0120, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_READY_B__SIM_M_HADDR12                    = IOMUX_PAD(0x0380, 0x0120, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_WE_B__RAWNAND_WE_B                        = IOMUX_PAD(0x0384, 0x0124, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_WE_B__USDHC3_CLK                          = IOMUX_PAD(0x0384, 0x0124, 2, 0x0604, 1, 0),
+	MX8MP_PAD_NAND_WE_B__I2C3_SDA                            = IOMUX_PAD(0x0384, 0x0124, 4 | IOMUX_CONFIG_SION, 0x05B8, 2, 0),
+	MX8MP_PAD_NAND_WE_B__GPIO3_IO17                          = IOMUX_PAD(0x0384, 0x0124, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_WE_B__CORESIGHT_TRACE15                   = IOMUX_PAD(0x0384, 0x0124, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_WE_B__SIM_M_HADDR13                       = IOMUX_PAD(0x0384, 0x0124, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_NAND_WP_B__RAWNAND_WP_B                        = IOMUX_PAD(0x0388, 0x0128, 0, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_WP_B__USDHC3_CMD                          = IOMUX_PAD(0x0388, 0x0128, 2, 0x060C, 1, 0),
+	MX8MP_PAD_NAND_WP_B__I2C4_SCL                            = IOMUX_PAD(0x0388, 0x0128, 4 | IOMUX_CONFIG_SION, 0x05BC, 3, 0),
+	MX8MP_PAD_NAND_WP_B__GPIO3_IO18                          = IOMUX_PAD(0x0388, 0x0128, 5, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_WP_B__CORESIGHT_EVENTO                    = IOMUX_PAD(0x0388, 0x0128, 6, 0x0000, 0, 0),
+	MX8MP_PAD_NAND_WP_B__SIM_M_HADDR14                       = IOMUX_PAD(0x0388, 0x0128, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC               = IOMUX_PAD(0x038C, 0x012C, 0, 0x0508, 0, 0),
+	MX8MP_PAD_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00             = IOMUX_PAD(0x038C, 0x012C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXFS__PWM4_OUT                            = IOMUX_PAD(0x038C, 0x012C, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXFS__I2C6_SCL                            = IOMUX_PAD(0x038C, 0x012C, 3 | IOMUX_CONFIG_SION, 0x05CC, 1, 0),
+	MX8MP_PAD_SAI5_RXFS__GPIO3_IO19                          = IOMUX_PAD(0x038C, 0x012C, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI5_RXC__AUDIOMIX_SAI5_RX_BCLK                = IOMUX_PAD(0x0390, 0x0130, 0, 0x04F4, 0, 0),
+	MX8MP_PAD_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01              = IOMUX_PAD(0x0390, 0x0130, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXC__PWM3_OUT                             = IOMUX_PAD(0x0390, 0x0130, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXC__I2C6_SDA                             = IOMUX_PAD(0x0390, 0x0130, 3 | IOMUX_CONFIG_SION, 0x05D0, 1, 0),
+	MX8MP_PAD_SAI5_RXC__AUDIOMIX_CLK                         = IOMUX_PAD(0x0390, 0x0130, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXC__GPIO3_IO20                           = IOMUX_PAD(0x0390, 0x0130, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00             = IOMUX_PAD(0x0394, 0x0134, 0, 0x04F8, 0, 0),
+	MX8MP_PAD_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02             = IOMUX_PAD(0x0394, 0x0134, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD0__PWM2_OUT                            = IOMUX_PAD(0x0394, 0x0134, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD0__I2C5_SCL                            = IOMUX_PAD(0x0394, 0x0134, 3 | IOMUX_CONFIG_SION, 0x05C4, 1, 0),
+	MX8MP_PAD_SAI5_RXD0__AUDIOMIX_BIT_STREAM00               = IOMUX_PAD(0x0394, 0x0134, 4, 0x04C0, 2, 0),
+	MX8MP_PAD_SAI5_RXD0__GPIO3_IO21                          = IOMUX_PAD(0x0394, 0x0134, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01             = IOMUX_PAD(0x0398, 0x0138, 0, 0x04FC, 0, 0),
+	MX8MP_PAD_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03             = IOMUX_PAD(0x0398, 0x0138, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC               = IOMUX_PAD(0x0398, 0x0138, 2, 0x04D8, 0, 0),
+	MX8MP_PAD_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC               = IOMUX_PAD(0x0398, 0x0138, 3, 0x0510, 0, 0),
+	MX8MP_PAD_SAI5_RXD1__AUDIOMIX_BIT_STREAM01               = IOMUX_PAD(0x0398, 0x0138, 4, 0x04C4, 2, 0),
+	MX8MP_PAD_SAI5_RXD1__GPIO3_IO22                          = IOMUX_PAD(0x0398, 0x0138, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD1__CAN1_TX                             = IOMUX_PAD(0x0398, 0x0138, 6, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02             = IOMUX_PAD(0x039C, 0x013C, 0, 0x0500, 0, 0),
+	MX8MP_PAD_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04             = IOMUX_PAD(0x039C, 0x013C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC               = IOMUX_PAD(0x039C, 0x013C, 2, 0x04D8, 1, 0),
+	MX8MP_PAD_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK               = IOMUX_PAD(0x039C, 0x013C, 3, 0x050C, 0, 0),
+	MX8MP_PAD_SAI5_RXD2__AUDIOMIX_BIT_STREAM02               = IOMUX_PAD(0x039C, 0x013C, 4, 0x04C8, 2, 0),
+	MX8MP_PAD_SAI5_RXD2__GPIO3_IO23                          = IOMUX_PAD(0x039C, 0x013C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD2__CAN1_RX                             = IOMUX_PAD(0x039C, 0x013C, 6, 0x054C, 0, 0),
+
+	MX8MP_PAD_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03             = IOMUX_PAD(0x03A0, 0x0140, 0, 0x0504, 0, 0),
+	MX8MP_PAD_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05             = IOMUX_PAD(0x03A0, 0x0140, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC               = IOMUX_PAD(0x03A0, 0x0140, 2, 0x04D8, 2, 0),
+	MX8MP_PAD_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00             = IOMUX_PAD(0x03A0, 0x0140, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD3__AUDIOMIX_BIT_STREAM03               = IOMUX_PAD(0x03A0, 0x0140, 4, 0x04CC, 2, 0),
+	MX8MP_PAD_SAI5_RXD3__GPIO3_IO24                          = IOMUX_PAD(0x03A0, 0x0140, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_RXD3__CAN2_TX                             = IOMUX_PAD(0x03A0, 0x0140, 6, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                  = IOMUX_PAD(0x03A4, 0x0144, 0, 0x04F0, 0, 0),
+	MX8MP_PAD_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK               = IOMUX_PAD(0x03A4, 0x0144, 1, 0x04D4, 0, 0),
+	MX8MP_PAD_SAI5_MCLK__PWM1_OUT                            = IOMUX_PAD(0x03A4, 0x0144, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_MCLK__I2C5_SDA                            = IOMUX_PAD(0x03A4, 0x0144, 3 | IOMUX_CONFIG_SION, 0x05C8, 1, 0),
+	MX8MP_PAD_SAI5_MCLK__GPIO3_IO25                          = IOMUX_PAD(0x03A4, 0x0144, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI5_MCLK__CAN2_RX                             = IOMUX_PAD(0x03A4, 0x0144, 6, 0x0550, 0, 0),
+
+	MX8MP_PAD_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC               = IOMUX_PAD(0x03A8, 0x0148, 0, 0x04D0, 0, 0),
+	MX8MP_PAD_SAI1_RXFS__AUDIOMIX_SAI5_RX_SYNC               = IOMUX_PAD(0x03A8, 0x0148, 1, 0x0508, 1, 0),
+	MX8MP_PAD_SAI1_RXFS__ENET1_1588_EVENT0_IN                = IOMUX_PAD(0x03A8, 0x0148, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXFS__GPIO4_IO00                          = IOMUX_PAD(0x03A8, 0x0148, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK                = IOMUX_PAD(0x03AC, 0x014C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXC__AUDIOMIX_SAI5_RX_BCLK                = IOMUX_PAD(0x03AC, 0x014C, 1, 0x04F4, 1, 0),
+	MX8MP_PAD_SAI1_RXC__AUDIOMIX_CLK                         = IOMUX_PAD(0x03AC, 0x014C, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXC__ENET1_1588_EVENT0_OUT                = IOMUX_PAD(0x03AC, 0x014C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXC__GPIO4_IO01                           = IOMUX_PAD(0x03AC, 0x014C, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00             = IOMUX_PAD(0x03B0, 0x0150, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00             = IOMUX_PAD(0x03B0, 0x0150, 1, 0x04F8, 1, 0),
+	MX8MP_PAD_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01             = IOMUX_PAD(0x03B0, 0x0150, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD0__AUDIOMIX_BIT_STREAM00               = IOMUX_PAD(0x03B0, 0x0150, 3, 0x04C0, 3, 0),
+	MX8MP_PAD_SAI1_RXD0__ENET1_1588_EVENT1_IN                = IOMUX_PAD(0x03B0, 0x0150, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD0__GPIO4_IO02                          = IOMUX_PAD(0x03B0, 0x0150, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01             = IOMUX_PAD(0x03B4, 0x0154, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01             = IOMUX_PAD(0x03B4, 0x0154, 1, 0x04FC, 1, 0),
+	MX8MP_PAD_SAI1_RXD1__AUDIOMIX_BIT_STREAM01               = IOMUX_PAD(0x03B4, 0x0154, 3, 0x04C4, 3, 0),
+	MX8MP_PAD_SAI1_RXD1__ENET1_1588_EVENT1_OUT               = IOMUX_PAD(0x03B4, 0x0154, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD1__GPIO4_IO03                          = IOMUX_PAD(0x03B4, 0x0154, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02             = IOMUX_PAD(0x03B8, 0x0158, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02             = IOMUX_PAD(0x03B8, 0x0158, 1, 0x0500, 1, 0),
+	MX8MP_PAD_SAI1_RXD2__AUDIOMIX_BIT_STREAM02               = IOMUX_PAD(0x03B8, 0x0158, 3, 0x04C8, 3, 0),
+	MX8MP_PAD_SAI1_RXD2__ENET1_MDC                           = IOMUX_PAD(0x03B8, 0x0158, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD2__GPIO4_IO04                          = IOMUX_PAD(0x03B8, 0x0158, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03             = IOMUX_PAD(0x03BC, 0x015C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03             = IOMUX_PAD(0x03BC, 0x015C, 1, 0x0504, 1, 0),
+	MX8MP_PAD_SAI1_RXD3__AUDIOMIX_BIT_STREAM03               = IOMUX_PAD(0x03BC, 0x015C, 3, 0x04CC, 3, 0),
+	MX8MP_PAD_SAI1_RXD3__ENET1_MDIO                          = IOMUX_PAD(0x03BC, 0x015C, 4, 0x057C, 1, 0),
+	MX8MP_PAD_SAI1_RXD3__GPIO4_IO05                          = IOMUX_PAD(0x03BC, 0x015C, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04             = IOMUX_PAD(0x03C0, 0x0160, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK               = IOMUX_PAD(0x03C0, 0x0160, 1, 0x0524, 1, 0),
+	MX8MP_PAD_SAI1_RXD4__AUDIOMIX_SAI6_RX_BCLK               = IOMUX_PAD(0x03C0, 0x0160, 2, 0x0518, 1, 0),
+	MX8MP_PAD_SAI1_RXD4__ENET1_RGMII_RD0                     = IOMUX_PAD(0x03C0, 0x0160, 4, 0x0580, 1, 0),
+	MX8MP_PAD_SAI1_RXD4__GPIO4_IO06                          = IOMUX_PAD(0x03C0, 0x0160, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXD5__AUDIOMIX_SAI1_RX_DATA05             = IOMUX_PAD(0x03C4, 0x0164, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD5__AUDIOMIX_SAI6_TX_DATA00             = IOMUX_PAD(0x03C4, 0x0164, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00             = IOMUX_PAD(0x03C4, 0x0164, 2, 0x051C, 1, 0),
+	MX8MP_PAD_SAI1_RXD5__AUDIOMIX_SAI1_RX_SYNC               = IOMUX_PAD(0x03C4, 0x0164, 3, 0x04D0, 1, 0),
+	MX8MP_PAD_SAI1_RXD5__ENET1_RGMII_RD1                     = IOMUX_PAD(0x03C4, 0x0164, 4, 0x0584, 1, 0),
+	MX8MP_PAD_SAI1_RXD5__GPIO4_IO07                          = IOMUX_PAD(0x03C4, 0x0164, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXD6__AUDIOMIX_SAI1_RX_DATA06             = IOMUX_PAD(0x03C8, 0x0168, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD6__AUDIOMIX_SAI6_TX_SYNC               = IOMUX_PAD(0x03C8, 0x0168, 1, 0x0528, 1, 0),
+	MX8MP_PAD_SAI1_RXD6__AUDIOMIX_SAI6_RX_SYNC               = IOMUX_PAD(0x03C8, 0x0168, 2, 0x0520, 1, 0),
+	MX8MP_PAD_SAI1_RXD6__ENET1_RGMII_RD2                     = IOMUX_PAD(0x03C8, 0x0168, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD6__GPIO4_IO08                          = IOMUX_PAD(0x03C8, 0x0168, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_RXD7__AUDIOMIX_SAI1_RX_DATA07             = IOMUX_PAD(0x03CC, 0x016C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD7__AUDIOMIX_SAI6_MCLK                  = IOMUX_PAD(0x03CC, 0x016C, 1, 0x0514, 1, 0),
+	MX8MP_PAD_SAI1_RXD7__AUDIOMIX_SAI1_TX_SYNC               = IOMUX_PAD(0x03CC, 0x016C, 2, 0x04D8, 3, 0),
+	MX8MP_PAD_SAI1_RXD7__AUDIOMIX_SAI1_TX_DATA04             = IOMUX_PAD(0x03CC, 0x016C, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD7__ENET1_RGMII_RD3                     = IOMUX_PAD(0x03CC, 0x016C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_RXD7__GPIO4_IO09                          = IOMUX_PAD(0x03CC, 0x016C, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC               = IOMUX_PAD(0x03D0, 0x0170, 0, 0x04D8, 4, 0),
+	MX8MP_PAD_SAI1_TXFS__AUDIOMIX_SAI5_TX_SYNC               = IOMUX_PAD(0x03D0, 0x0170, 1, 0x0510, 1, 0),
+	MX8MP_PAD_SAI1_TXFS__ENET1_RGMII_RX_CTL                  = IOMUX_PAD(0x03D0, 0x0170, 4, 0x0588, 1, 0),
+	MX8MP_PAD_SAI1_TXFS__GPIO4_IO10                          = IOMUX_PAD(0x03D0, 0x0170, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK                = IOMUX_PAD(0x03D4, 0x0174, 0, 0x04D4, 1, 0),
+	MX8MP_PAD_SAI1_TXC__AUDIOMIX_SAI5_TX_BCLK                = IOMUX_PAD(0x03D4, 0x0174, 1, 0x050C, 1, 0),
+	MX8MP_PAD_SAI1_TXC__ENET1_RGMII_RXC                      = IOMUX_PAD(0x03D4, 0x0174, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXC__GPIO4_IO11                           = IOMUX_PAD(0x03D4, 0x0174, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00             = IOMUX_PAD(0x03D8, 0x0178, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD0__AUDIOMIX_SAI5_TX_DATA00             = IOMUX_PAD(0x03D8, 0x0178, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD0__ENET1_RGMII_TD0                     = IOMUX_PAD(0x03D8, 0x0178, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD0__GPIO4_IO12                          = IOMUX_PAD(0x03D8, 0x0178, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01             = IOMUX_PAD(0x03DC, 0x017C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD1__AUDIOMIX_SAI5_TX_DATA01             = IOMUX_PAD(0x03DC, 0x017C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD1__ENET1_RGMII_TD1                     = IOMUX_PAD(0x03DC, 0x017C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD1__GPIO4_IO13                          = IOMUX_PAD(0x03DC, 0x017C, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02             = IOMUX_PAD(0x03E0, 0x0180, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD2__AUDIOMIX_SAI5_TX_DATA02             = IOMUX_PAD(0x03E0, 0x0180, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD2__ENET1_RGMII_TD2                     = IOMUX_PAD(0x03E0, 0x0180, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD2__GPIO4_IO14                          = IOMUX_PAD(0x03E0, 0x0180, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03             = IOMUX_PAD(0x03E4, 0x0184, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD3__AUDIOMIX_SAI5_TX_DATA03             = IOMUX_PAD(0x03E4, 0x0184, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD3__ENET1_RGMII_TD3                     = IOMUX_PAD(0x03E4, 0x0184, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD3__GPIO4_IO15                          = IOMUX_PAD(0x03E4, 0x0184, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04             = IOMUX_PAD(0x03E8, 0x0188, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD4__AUDIOMIX_SAI6_RX_BCLK               = IOMUX_PAD(0x03E8, 0x0188, 1, 0x0518, 2, 0),
+	MX8MP_PAD_SAI1_TXD4__AUDIOMIX_SAI6_TX_BCLK               = IOMUX_PAD(0x03E8, 0x0188, 2, 0x0524, 2, 0),
+	MX8MP_PAD_SAI1_TXD4__ENET1_RGMII_TX_CTL                  = IOMUX_PAD(0x03E8, 0x0188, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD4__GPIO4_IO16                          = IOMUX_PAD(0x03E8, 0x0188, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXD5__AUDIOMIX_SAI1_TX_DATA05             = IOMUX_PAD(0x03EC, 0x018C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD5__AUDIOMIX_SAI6_RX_DATA00             = IOMUX_PAD(0x03EC, 0x018C, 1, 0x051C, 2, 0),
+	MX8MP_PAD_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00             = IOMUX_PAD(0x03EC, 0x018C, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD5__ENET1_RGMII_TXC                     = IOMUX_PAD(0x03EC, 0x018C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD5__GPIO4_IO17                          = IOMUX_PAD(0x03EC, 0x018C, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXD6__AUDIOMIX_SAI1_TX_DATA06             = IOMUX_PAD(0x03F0, 0x0190, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD6__AUDIOMIX_SAI6_RX_SYNC               = IOMUX_PAD(0x03F0, 0x0190, 1, 0x0520, 2, 0),
+	MX8MP_PAD_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC               = IOMUX_PAD(0x03F0, 0x0190, 2, 0x0528, 2, 0),
+	MX8MP_PAD_SAI1_TXD6__ENET1_RX_ER                         = IOMUX_PAD(0x03F0, 0x0190, 4, 0x058C, 1, 0),
+	MX8MP_PAD_SAI1_TXD6__GPIO4_IO18                          = IOMUX_PAD(0x03F0, 0x0190, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07             = IOMUX_PAD(0x03F4, 0x0194, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD7__AUDIOMIX_SAI6_MCLK                  = IOMUX_PAD(0x03F4, 0x0194, 1, 0x0514, 2, 0),
+	MX8MP_PAD_SAI1_TXD7__AUDIOMIX_CLK                        = IOMUX_PAD(0x03F4, 0x0194, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD7__ENET1_TX_ER                         = IOMUX_PAD(0x03F4, 0x0194, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_TXD7__GPIO4_IO19                          = IOMUX_PAD(0x03F4, 0x0194, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI1_MCLK__AUDIOMIX_SAI1_MCLK                  = IOMUX_PAD(0x03F8, 0x0198, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI1_MCLK__AUDIOMIX_SAI5_MCLK                  = IOMUX_PAD(0x03F8, 0x0198, 1, 0x04F0, 1, 0),
+	MX8MP_PAD_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK               = IOMUX_PAD(0x03F8, 0x0198, 2, 0x04D4, 2, 0),
+	MX8MP_PAD_SAI1_MCLK__ENET1_TX_CLK                        = IOMUX_PAD(0x03F8, 0x0198, 4, 0x0578, 1, 0),
+	MX8MP_PAD_SAI1_MCLK__GPIO4_IO20                          = IOMUX_PAD(0x03F8, 0x0198, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC               = IOMUX_PAD(0x03FC, 0x019C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXFS__AUDIOMIX_SAI5_TX_SYNC               = IOMUX_PAD(0x03FC, 0x019C, 1, 0x0510, 2, 0),
+	MX8MP_PAD_SAI2_RXFS__AUDIOMIX_SAI5_TX_DATA01             = IOMUX_PAD(0x03FC, 0x019C, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXFS__AUDIOMIX_SAI2_RX_DATA01             = IOMUX_PAD(0x03FC, 0x019C, 3, 0x04DC, 0, 0),
+	MX8MP_PAD_SAI2_RXFS__UART1_DCE_TX                        = IOMUX_PAD(0x03FC, 0x019C, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXFS__UART1_DTE_RX                        = IOMUX_PAD(0x03FC, 0x019C, 4, 0x05E8, 2, 0),
+	MX8MP_PAD_SAI2_RXFS__GPIO4_IO21                          = IOMUX_PAD(0x03FC, 0x019C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXFS__AUDIOMIX_BIT_STREAM02               = IOMUX_PAD(0x03FC, 0x019C, 6, 0x04C8, 4, 0),
+	MX8MP_PAD_SAI2_RXFS__SIM_M_HSIZE00                       = IOMUX_PAD(0x03FC, 0x019C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                = IOMUX_PAD(0x0400, 0x01A0, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                = IOMUX_PAD(0x0400, 0x01A0, 1, 0x050C, 2, 0),
+	MX8MP_PAD_SAI2_RXC__CAN1_TX                              = IOMUX_PAD(0x0400, 0x01A0, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXC__UART1_DCE_RX                         = IOMUX_PAD(0x0400, 0x01A0, 4, 0x05E8, 3, 0),
+	MX8MP_PAD_SAI2_RXC__UART1_DTE_TX                         = IOMUX_PAD(0x0400, 0x01A0, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXC__GPIO4_IO22                           = IOMUX_PAD(0x0400, 0x01A0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXC__AUDIOMIX_BIT_STREAM01                = IOMUX_PAD(0x0400, 0x01A0, 6, 0x04C4, 4, 0),
+	MX8MP_PAD_SAI2_RXC__SIM_M_HSIZE01                        = IOMUX_PAD(0x0400, 0x01A0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00             = IOMUX_PAD(0x0404, 0x01A4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00             = IOMUX_PAD(0x0404, 0x01A4, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT            = IOMUX_PAD(0x0404, 0x01A4, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXD0__AUDIOMIX_SAI2_TX_DATA01             = IOMUX_PAD(0x0404, 0x01A4, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXD0__UART1_DCE_RTS                       = IOMUX_PAD(0x0404, 0x01A4, 4, 0x05E4, 2, 0),
+	MX8MP_PAD_SAI2_RXD0__UART1_DTE_CTS                       = IOMUX_PAD(0x0404, 0x01A4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXD0__GPIO4_IO23                          = IOMUX_PAD(0x0404, 0x01A4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_RXD0__AUDIOMIX_BIT_STREAM03               = IOMUX_PAD(0x0404, 0x01A4, 6, 0x04CC, 4, 0),
+	MX8MP_PAD_SAI2_RXD0__SIM_M_HSIZE02                       = IOMUX_PAD(0x0404, 0x01A4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC               = IOMUX_PAD(0x0408, 0x01A8, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01             = IOMUX_PAD(0x0408, 0x01A8, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT            = IOMUX_PAD(0x0408, 0x01A8, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXFS__AUDIOMIX_SAI2_TX_DATA01             = IOMUX_PAD(0x0408, 0x01A8, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXFS__UART1_DCE_CTS                       = IOMUX_PAD(0x0408, 0x01A8, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXFS__UART1_DTE_RTS                       = IOMUX_PAD(0x0408, 0x01A8, 4, 0x05E4, 3, 0),
+	MX8MP_PAD_SAI2_TXFS__GPIO4_IO24                          = IOMUX_PAD(0x0408, 0x01A8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXFS__AUDIOMIX_BIT_STREAM02               = IOMUX_PAD(0x0408, 0x01A8, 6, 0x04C8, 5, 0),
+	MX8MP_PAD_SAI2_TXFS__SIM_M_HWRITE                        = IOMUX_PAD(0x0408, 0x01A8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                = IOMUX_PAD(0x040C, 0x01AC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02              = IOMUX_PAD(0x040C, 0x01AC, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXC__CAN1_RX                              = IOMUX_PAD(0x040C, 0x01AC, 3, 0x054C, 1, 0),
+	MX8MP_PAD_SAI2_TXC__GPIO4_IO25                           = IOMUX_PAD(0x040C, 0x01AC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXC__AUDIOMIX_BIT_STREAM01                = IOMUX_PAD(0x040C, 0x01AC, 6, 0x04C4, 5, 0),
+	MX8MP_PAD_SAI2_TXC__SIM_M_HREADYOUT                      = IOMUX_PAD(0x040C, 0x01AC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00             = IOMUX_PAD(0x0410, 0x01B0, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03             = IOMUX_PAD(0x0410, 0x01B0, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN             = IOMUX_PAD(0x0410, 0x01B0, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXD0__CAN2_TX                             = IOMUX_PAD(0x0410, 0x01B0, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN         = IOMUX_PAD(0x0410, 0x01B0, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXD0__GPIO4_IO26                          = IOMUX_PAD(0x0410, 0x01B0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXD0__CCMSRCGPCMIX_BOOT_MODE04            = IOMUX_PAD(0x0410, 0x01B0, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_TXD0__TPSMP_CLK                           = IOMUX_PAD(0x0410, 0x01B0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI2_MCLK__AUDIOMIX_SAI2_MCLK                  = IOMUX_PAD(0x0414, 0x01B4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_MCLK__AUDIOMIX_SAI5_MCLK                  = IOMUX_PAD(0x0414, 0x01B4, 1, 0x04F0, 2, 0),
+	MX8MP_PAD_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN             = IOMUX_PAD(0x0414, 0x01B4, 2, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_MCLK__CAN2_RX                             = IOMUX_PAD(0x0414, 0x01B4, 3, 0x0550, 1, 0),
+	MX8MP_PAD_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN         = IOMUX_PAD(0x0414, 0x01B4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_MCLK__GPIO4_IO27                          = IOMUX_PAD(0x0414, 0x01B4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI2_MCLK__AUDIOMIX_SAI3_MCLK                  = IOMUX_PAD(0x0414, 0x01B4, 6, 0x04E0, 1, 0),
+	MX8MP_PAD_SAI2_MCLK__TPSMP_HDATA_DIR                     = IOMUX_PAD(0x0414, 0x01B4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC               = IOMUX_PAD(0x0418, 0x01B8, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01             = IOMUX_PAD(0x0418, 0x01B8, 1, 0x04DC, 1, 0),
+	MX8MP_PAD_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC               = IOMUX_PAD(0x0418, 0x01B8, 2, 0x0508, 2, 0),
+	MX8MP_PAD_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01             = IOMUX_PAD(0x0418, 0x01B8, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXFS__AUDIOMIX_SPDIF_IN                   = IOMUX_PAD(0x0418, 0x01B8, 4, 0x0544, 2, 0),
+	MX8MP_PAD_SAI3_RXFS__GPIO4_IO28                          = IOMUX_PAD(0x0418, 0x01B8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXFS__AUDIOMIX_BIT_STREAM00               = IOMUX_PAD(0x0418, 0x01B8, 6, 0x04C0, 4, 0),
+	MX8MP_PAD_SAI3_RXFS__TPSMP_HTRANS00                      = IOMUX_PAD(0x0418, 0x01B8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                = IOMUX_PAD(0x041C, 0x01BC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02              = IOMUX_PAD(0x041C, 0x01BC, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK                = IOMUX_PAD(0x041C, 0x01BC, 2, 0x04F4, 2, 0),
+	MX8MP_PAD_SAI3_RXC__GPT1_CLK                             = IOMUX_PAD(0x041C, 0x01BC, 3, 0x059C, 0, 0),
+	MX8MP_PAD_SAI3_RXC__UART2_DCE_CTS                        = IOMUX_PAD(0x041C, 0x01BC, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXC__UART2_DTE_RTS                        = IOMUX_PAD(0x041C, 0x01BC, 4, 0x05EC, 2, 0),
+	MX8MP_PAD_SAI3_RXC__GPIO4_IO29                           = IOMUX_PAD(0x041C, 0x01BC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXC__AUDIOMIX_CLK                         = IOMUX_PAD(0x041C, 0x01BC, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXC__TPSMP_HTRANS01                       = IOMUX_PAD(0x041C, 0x01BC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00              = IOMUX_PAD(0x0420, 0x01C0, 0, 0x04E4, 1, 0),
+	MX8MP_PAD_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03              = IOMUX_PAD(0x0420, 0x01C0, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00              = IOMUX_PAD(0x0420, 0x01C0, 2, 0x04F8, 2, 0),
+	MX8MP_PAD_SAI3_RXD__UART2_DCE_RTS                        = IOMUX_PAD(0x0420, 0x01C0, 4, 0x05EC, 3, 0),
+	MX8MP_PAD_SAI3_RXD__UART2_DTE_CTS                        = IOMUX_PAD(0x0420, 0x01C0, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXD__GPIO4_IO30                           = IOMUX_PAD(0x0420, 0x01C0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_RXD__AUDIOMIX_BIT_STREAM01                = IOMUX_PAD(0x0420, 0x01C0, 6, 0x04C4, 6, 0),
+	MX8MP_PAD_SAI3_RXD__TPSMP_HDATA00                        = IOMUX_PAD(0x0420, 0x01C0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC               = IOMUX_PAD(0x0424, 0x01C4, 0, 0x04EC, 1, 0),
+	MX8MP_PAD_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01             = IOMUX_PAD(0x0424, 0x01C4, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01             = IOMUX_PAD(0x0424, 0x01C4, 2, 0x04FC, 2, 0),
+	MX8MP_PAD_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01             = IOMUX_PAD(0x0424, 0x01C4, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXFS__UART2_DCE_RX                        = IOMUX_PAD(0x0424, 0x01C4, 4, 0x05F0, 4, 0),
+	MX8MP_PAD_SAI3_TXFS__UART2_DTE_TX                        = IOMUX_PAD(0x0424, 0x01C4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXFS__GPIO4_IO31                          = IOMUX_PAD(0x0424, 0x01C4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXFS__AUDIOMIX_BIT_STREAM03               = IOMUX_PAD(0x0424, 0x01C4, 6, 0x04CC, 5, 0),
+	MX8MP_PAD_SAI3_TXFS__TPSMP_HDATA01                       = IOMUX_PAD(0x0424, 0x01C4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                = IOMUX_PAD(0x0428, 0x01C8, 0, 0x04E8, 1, 0),
+	MX8MP_PAD_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02              = IOMUX_PAD(0x0428, 0x01C8, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02              = IOMUX_PAD(0x0428, 0x01C8, 2, 0x0500, 2, 0),
+	MX8MP_PAD_SAI3_TXC__GPT1_CAPTURE1                        = IOMUX_PAD(0x0428, 0x01C8, 3, 0x0594, 0, 0),
+	MX8MP_PAD_SAI3_TXC__UART2_DCE_TX                         = IOMUX_PAD(0x0428, 0x01C8, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXC__UART2_DTE_RX                         = IOMUX_PAD(0x0428, 0x01C8, 4, 0x05F0, 5, 0),
+	MX8MP_PAD_SAI3_TXC__GPIO5_IO00                           = IOMUX_PAD(0x0428, 0x01C8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXC__AUDIOMIX_BIT_STREAM02                = IOMUX_PAD(0x0428, 0x01C8, 6, 0x04C8, 6, 0),
+	MX8MP_PAD_SAI3_TXC__TPSMP_HDATA02                        = IOMUX_PAD(0x0428, 0x01C8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00              = IOMUX_PAD(0x042C, 0x01CC, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03              = IOMUX_PAD(0x042C, 0x01CC, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03              = IOMUX_PAD(0x042C, 0x01CC, 2, 0x0504, 2, 0),
+	MX8MP_PAD_SAI3_TXD__GPT1_CAPTURE2                        = IOMUX_PAD(0x042C, 0x01CC, 3, 0x0598, 0, 0),
+	MX8MP_PAD_SAI3_TXD__AUDIOMIX_SPDIF_EXT_CLK               = IOMUX_PAD(0x042C, 0x01CC, 4, 0x0548, 0, 0),
+	MX8MP_PAD_SAI3_TXD__GPIO5_IO01                           = IOMUX_PAD(0x042C, 0x01CC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXD__CCMSRCGPCMIX_BOOT_MODE05             = IOMUX_PAD(0x042C, 0x01CC, 6, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_TXD__TPSMP_HDATA03                        = IOMUX_PAD(0x042C, 0x01CC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SAI3_MCLK__AUDIOMIX_SAI3_MCLK                  = IOMUX_PAD(0x0430, 0x01D0, 0, 0x04E0, 2, 0),
+	MX8MP_PAD_SAI3_MCLK__PWM4_OUT                            = IOMUX_PAD(0x0430, 0x01D0, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_MCLK__AUDIOMIX_SAI5_MCLK                  = IOMUX_PAD(0x0430, 0x01D0, 2, 0x04F0, 3, 0),
+	MX8MP_PAD_SAI3_MCLK__AUDIOMIX_SPDIF_OUT                  = IOMUX_PAD(0x0430, 0x01D0, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_MCLK__GPIO5_IO02                          = IOMUX_PAD(0x0430, 0x01D0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SAI3_MCLK__AUDIOMIX_SPDIF_IN                   = IOMUX_PAD(0x0430, 0x01D0, 6, 0x0544, 3, 0),
+	MX8MP_PAD_SAI3_MCLK__TPSMP_HDATA04                       = IOMUX_PAD(0x0430, 0x01D0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_SPDIF_TX__AUDIOMIX_SPDIF_OUT                   = IOMUX_PAD(0x0434, 0x01D4, 0, 0x0000, 0, 0),
+	MX8MP_PAD_SPDIF_TX__PWM3_OUT                             = IOMUX_PAD(0x0434, 0x01D4, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SPDIF_TX__I2C5_SCL                             = IOMUX_PAD(0x0434, 0x01D4, 2 | IOMUX_CONFIG_SION, 0x05C4, 2, 0),
+	MX8MP_PAD_SPDIF_TX__GPT1_COMPARE1                        = IOMUX_PAD(0x0434, 0x01D4, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SPDIF_TX__CAN1_TX                              = IOMUX_PAD(0x0434, 0x01D4, 4, 0x0000, 0, 0),
+	MX8MP_PAD_SPDIF_TX__GPIO5_IO03                           = IOMUX_PAD(0x0434, 0x01D4, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SPDIF_RX__AUDIOMIX_SPDIF_IN                    = IOMUX_PAD(0x0438, 0x01D8, 0, 0x0544, 4, 0),
+	MX8MP_PAD_SPDIF_RX__PWM2_OUT                             = IOMUX_PAD(0x0438, 0x01D8, 1, 0x0000, 0, 0),
+	MX8MP_PAD_SPDIF_RX__I2C5_SDA                             = IOMUX_PAD(0x0438, 0x01D8, 2 | IOMUX_CONFIG_SION, 0x05C8, 2, 0),
+	MX8MP_PAD_SPDIF_RX__GPT1_COMPARE2                        = IOMUX_PAD(0x0438, 0x01D8, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SPDIF_RX__CAN1_RX                              = IOMUX_PAD(0x0438, 0x01D8, 4, 0x054C, 2, 0),
+	MX8MP_PAD_SPDIF_RX__GPIO5_IO04                           = IOMUX_PAD(0x0438, 0x01D8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_SPDIF_EXT_CLK__GPT1_COMPARE3                   = IOMUX_PAD(0x043C, 0x01DC, 3, 0x0000, 0, 0),
+	MX8MP_PAD_SPDIF_EXT_CLK__GPIO5_IO05                      = IOMUX_PAD(0x043C, 0x01DC, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_SPDIF_EXT_CLK__AUDIOMIX_SPDIF_EXT_CLK          = IOMUX_PAD(0x043C, 0x01DC, 0, 0x0548, 1, 0),
+	MX8MP_PAD_SPDIF_EXT_CLK__PWM1_OUT                        = IOMUX_PAD(0x043C, 0x01DC, 1, 0x0000, 0, 0),
+
+	MX8MP_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       = IOMUX_PAD(0x0440, 0x01E0, 0, 0x0558, 0, 0),
+	MX8MP_PAD_ECSPI1_SCLK__UART3_DCE_RX                      = IOMUX_PAD(0x0440, 0x01E0, 1, 0x05F8, 4, 0),
+	MX8MP_PAD_ECSPI1_SCLK__UART3_DTE_TX                      = IOMUX_PAD(0x0440, 0x01E0, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI1_SCLK__I2C1_SCL                          = IOMUX_PAD(0x0440, 0x01E0, 2 | IOMUX_CONFIG_SION, 0x05A4, 1, 0),
+	MX8MP_PAD_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC             = IOMUX_PAD(0x0440, 0x01E0, 3, 0x0538, 1, 0),
+	MX8MP_PAD_ECSPI1_SCLK__GPIO5_IO06                        = IOMUX_PAD(0x0440, 0x01E0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI1_SCLK__TPSMP_HDATA08                     = IOMUX_PAD(0x0440, 0x01E0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       = IOMUX_PAD(0x0444, 0x01E4, 0, 0x0560, 0, 0),
+	MX8MP_PAD_ECSPI1_MOSI__UART3_DCE_TX                      = IOMUX_PAD(0x0444, 0x01E4, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI1_MOSI__UART3_DTE_RX                      = IOMUX_PAD(0x0444, 0x01E4, 1, 0x05F8, 5, 0),
+	MX8MP_PAD_ECSPI1_MOSI__I2C1_SDA                          = IOMUX_PAD(0x0444, 0x01E4, 2 | IOMUX_CONFIG_SION, 0x05A8, 1, 0),
+	MX8MP_PAD_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK             = IOMUX_PAD(0x0444, 0x01E4, 3, 0x0530, 1, 0),
+	MX8MP_PAD_ECSPI1_MOSI__GPIO5_IO07                        = IOMUX_PAD(0x0444, 0x01E4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI1_MOSI__TPSMP_HDATA09                     = IOMUX_PAD(0x0444, 0x01E4, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ECSPI1_MISO__ECSPI1_MISO                       = IOMUX_PAD(0x0448, 0x01E8, 0, 0x055C, 0, 0),
+	MX8MP_PAD_ECSPI1_MISO__UART3_DCE_CTS                     = IOMUX_PAD(0x0448, 0x01E8, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI1_MISO__UART3_DTE_RTS                     = IOMUX_PAD(0x0448, 0x01E8, 1, 0x05F4, 2, 0),
+	MX8MP_PAD_ECSPI1_MISO__I2C2_SCL                          = IOMUX_PAD(0x0448, 0x01E8, 2 | IOMUX_CONFIG_SION, 0x05AC, 1, 0),
+	MX8MP_PAD_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00           = IOMUX_PAD(0x0448, 0x01E8, 3, 0x0534, 1, 0),
+	MX8MP_PAD_ECSPI1_MISO__GPIO5_IO08                        = IOMUX_PAD(0x0448, 0x01E8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI1_MISO__TPSMP_HDATA10                     = IOMUX_PAD(0x0448, 0x01E8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ECSPI1_SS0__ECSPI1_SS0                         = IOMUX_PAD(0x044C, 0x01EC, 0, 0x0564, 0, 0),
+	MX8MP_PAD_ECSPI1_SS0__UART3_DCE_RTS                      = IOMUX_PAD(0x044C, 0x01EC, 1, 0x05F4, 3, 0),
+	MX8MP_PAD_ECSPI1_SS0__UART3_DTE_CTS                      = IOMUX_PAD(0x044C, 0x01EC, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI1_SS0__I2C2_SDA                           = IOMUX_PAD(0x044C, 0x01EC, 2 | IOMUX_CONFIG_SION, 0x05B0, 1, 0),
+	MX8MP_PAD_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC              = IOMUX_PAD(0x044C, 0x01EC, 3, 0x0540, 1, 0),
+	MX8MP_PAD_ECSPI1_SS0__GPIO5_IO09                         = IOMUX_PAD(0x044C, 0x01EC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI1_SS0__TPSMP_HDATA11                      = IOMUX_PAD(0x044C, 0x01EC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       = IOMUX_PAD(0x0450, 0x01F0, 0, 0x0568, 1, 0),
+	MX8MP_PAD_ECSPI2_SCLK__UART4_DCE_RX                      = IOMUX_PAD(0x0450, 0x01F0, 1, 0x0600, 6, 0),
+	MX8MP_PAD_ECSPI2_SCLK__UART4_DTE_TX                      = IOMUX_PAD(0x0450, 0x01F0, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_SCLK__I2C3_SCL                          = IOMUX_PAD(0x0450, 0x01F0, 2 | IOMUX_CONFIG_SION, 0x05B4, 3, 0),
+	MX8MP_PAD_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK             = IOMUX_PAD(0x0450, 0x01F0, 3, 0x053C, 1, 0),
+	MX8MP_PAD_ECSPI2_SCLK__GPIO5_IO10                        = IOMUX_PAD(0x0450, 0x01F0, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_SCLK__TPSMP_HDATA12                     = IOMUX_PAD(0x0450, 0x01F0, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       = IOMUX_PAD(0x0454, 0x01F4, 0, 0x0570, 1, 0),
+	MX8MP_PAD_ECSPI2_MOSI__UART4_DCE_TX                      = IOMUX_PAD(0x0454, 0x01F4, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_MOSI__UART4_DTE_RX                      = IOMUX_PAD(0x0454, 0x01F4, 1, 0x0600, 7, 0),
+	MX8MP_PAD_ECSPI2_MOSI__I2C3_SDA                          = IOMUX_PAD(0x0454, 0x01F4, 2 | IOMUX_CONFIG_SION, 0x05B8, 3, 0),
+	MX8MP_PAD_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00           = IOMUX_PAD(0x0454, 0x01F4, 3, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_MOSI__GPIO5_IO11                        = IOMUX_PAD(0x0454, 0x01F4, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_MOSI__TPSMP_HDATA13                     = IOMUX_PAD(0x0454, 0x01F4, 7, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_MISO__GPIO5_IO12                        = IOMUX_PAD(0x0458, 0x01F8, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_MISO__TPSMP_HDATA14                     = IOMUX_PAD(0x0458, 0x01F8, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_ECSPI2_MISO__ECSPI2_MISO                       = IOMUX_PAD(0x0458, 0x01F8, 0, 0x056C, 1, 0),
+	MX8MP_PAD_ECSPI2_MISO__UART4_DCE_CTS                     = IOMUX_PAD(0x0458, 0x01F8, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_MISO__UART4_DTE_RTS                     = IOMUX_PAD(0x0458, 0x01F8, 1, 0x05FC, 2, 0),
+	MX8MP_PAD_ECSPI2_MISO__I2C4_SCL                          = IOMUX_PAD(0x0458, 0x01F8, 2 | IOMUX_CONFIG_SION, 0x05BC, 4, 0),
+	MX8MP_PAD_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK                = IOMUX_PAD(0x0458, 0x01F8, 3, 0x052C, 1, 0),
+	MX8MP_PAD_ECSPI2_MISO__CCMSRCGPCMIX_CLKO1                = IOMUX_PAD(0x0458, 0x01F8, 4, 0x0000, 0, 0),
+
+	MX8MP_PAD_ECSPI2_SS0__ECSPI2_SS0                         = IOMUX_PAD(0x045C, 0x01FC, 0, 0x0574, 1, 0),
+	MX8MP_PAD_ECSPI2_SS0__UART4_DCE_RTS                      = IOMUX_PAD(0x045C, 0x01FC, 1, 0x05FC, 3, 0),
+	MX8MP_PAD_ECSPI2_SS0__UART4_DTE_CTS                      = IOMUX_PAD(0x045C, 0x01FC, 1, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_SS0__I2C4_SDA                           = IOMUX_PAD(0x045C, 0x01FC, 2 | IOMUX_CONFIG_SION, 0x05C0, 4, 0),
+	MX8MP_PAD_ECSPI2_SS0__CCMSRCGPCMIX_CLKO2                 = IOMUX_PAD(0x045C, 0x01FC, 4, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_SS0__GPIO5_IO13                         = IOMUX_PAD(0x045C, 0x01FC, 5, 0x0000, 0, 0),
+	MX8MP_PAD_ECSPI2_SS0__TPSMP_HDATA15                      = IOMUX_PAD(0x045C, 0x01FC, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_I2C1_SCL__I2C1_SCL                             = IOMUX_PAD(0x0460, 0x0200, 0 | IOMUX_CONFIG_SION, 0x05A4, 2, 0),
+	MX8MP_PAD_I2C1_SCL__ENET_QOS_MDC                         = IOMUX_PAD(0x0460, 0x0200, 1, 0x0000, 0, 0),
+	MX8MP_PAD_I2C1_SCL__ECSPI1_SCLK                          = IOMUX_PAD(0x0460, 0x0200, 3, 0x0558, 1, 0),
+	MX8MP_PAD_I2C1_SCL__GPIO5_IO14                           = IOMUX_PAD(0x0460, 0x0200, 5, 0x0000, 0, 0),
+	MX8MP_PAD_I2C1_SCL__TPSMP_HDATA16                        = IOMUX_PAD(0x0460, 0x0200, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_I2C1_SDA__I2C1_SDA                             = IOMUX_PAD(0x0464, 0x0204, 0 | IOMUX_CONFIG_SION, 0x05A8, 2, 0),
+	MX8MP_PAD_I2C1_SDA__ENET_QOS_MDIO                        = IOMUX_PAD(0x0464, 0x0204, 1, 0x0590, 2, 0),
+	MX8MP_PAD_I2C1_SDA__ECSPI1_MOSI                          = IOMUX_PAD(0x0464, 0x0204, 3, 0x0560, 1, 0),
+	MX8MP_PAD_I2C1_SDA__GPIO5_IO15                           = IOMUX_PAD(0x0464, 0x0204, 5, 0x0000, 0, 0),
+	MX8MP_PAD_I2C1_SDA__TPSMP_HDATA17                        = IOMUX_PAD(0x0464, 0x0204, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_I2C2_SCL__I2C2_SCL                             = IOMUX_PAD(0x0468, 0x0208, 0 | IOMUX_CONFIG_SION, 0x05AC, 2, 0),
+	MX8MP_PAD_I2C2_SCL__ENET_QOS_1588_EVENT1_IN              = IOMUX_PAD(0x0468, 0x0208, 1, 0x0000, 0, 0),
+	MX8MP_PAD_I2C2_SCL__USDHC3_CD_B                          = IOMUX_PAD(0x0468, 0x0208, 2, 0x0608, 3, 0),
+	MX8MP_PAD_I2C2_SCL__ECSPI1_MISO                          = IOMUX_PAD(0x0468, 0x0208, 3, 0x055C, 1, 0),
+	MX8MP_PAD_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN          = IOMUX_PAD(0x0468, 0x0208, 4, 0x0000, 0, 0),
+	MX8MP_PAD_I2C2_SCL__GPIO5_IO16                           = IOMUX_PAD(0x0468, 0x0208, 5, 0x0000, 0, 0),
+	MX8MP_PAD_I2C2_SCL__TPSMP_HDATA18                        = IOMUX_PAD(0x0468, 0x0208, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_I2C2_SDA__I2C2_SDA                             = IOMUX_PAD(0x046C, 0x020C, 0 | IOMUX_CONFIG_SION, 0x05B0, 2, 0),
+	MX8MP_PAD_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT             = IOMUX_PAD(0x046C, 0x020C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_I2C2_SDA__USDHC3_WP                            = IOMUX_PAD(0x046C, 0x020C, 2, 0x0634, 3, 0),
+	MX8MP_PAD_I2C2_SDA__ECSPI1_SS0                           = IOMUX_PAD(0x046C, 0x020C, 3, 0x0564, 1, 0),
+	MX8MP_PAD_I2C2_SDA__GPIO5_IO17                           = IOMUX_PAD(0x046C, 0x020C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_I2C2_SDA__TPSMP_HDATA19                        = IOMUX_PAD(0x046C, 0x020C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_I2C3_SCL__I2C3_SCL                             = IOMUX_PAD(0x0470, 0x0210, 0 | IOMUX_CONFIG_SION, 0x05B4, 4, 0),
+	MX8MP_PAD_I2C3_SCL__PWM4_OUT                             = IOMUX_PAD(0x0470, 0x0210, 1, 0x0000, 0, 0),
+	MX8MP_PAD_I2C3_SCL__GPT2_CLK                             = IOMUX_PAD(0x0470, 0x0210, 2, 0x0000, 0, 0),
+	MX8MP_PAD_I2C3_SCL__ECSPI2_SCLK                          = IOMUX_PAD(0x0470, 0x0210, 3, 0x0568, 2, 0),
+	MX8MP_PAD_I2C3_SCL__GPIO5_IO18                           = IOMUX_PAD(0x0470, 0x0210, 5, 0x0000, 0, 0),
+	MX8MP_PAD_I2C3_SCL__TPSMP_HDATA20                        = IOMUX_PAD(0x0470, 0x0210, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_I2C3_SDA__I2C3_SDA                             = IOMUX_PAD(0x0474, 0x0214, 0 | IOMUX_CONFIG_SION, 0x05B8, 4, 0),
+	MX8MP_PAD_I2C3_SDA__PWM3_OUT                             = IOMUX_PAD(0x0474, 0x0214, 1, 0x0000, 0, 0),
+	MX8MP_PAD_I2C3_SDA__GPT3_CLK                             = IOMUX_PAD(0x0474, 0x0214, 2, 0x0000, 0, 0),
+	MX8MP_PAD_I2C3_SDA__ECSPI2_MOSI                          = IOMUX_PAD(0x0474, 0x0214, 3, 0x0570, 2, 0),
+	MX8MP_PAD_I2C3_SDA__GPIO5_IO19                           = IOMUX_PAD(0x0474, 0x0214, 5, 0x0000, 0, 0),
+	MX8MP_PAD_I2C3_SDA__TPSMP_HDATA21                        = IOMUX_PAD(0x0474, 0x0214, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_I2C4_SCL__I2C4_SCL                             = IOMUX_PAD(0x0478, 0x0218, 0 | IOMUX_CONFIG_SION, 0x05BC, 5, 0),
+	MX8MP_PAD_I2C4_SCL__PWM2_OUT                             = IOMUX_PAD(0x0478, 0x0218, 1, 0x0000, 0, 0),
+	MX8MP_PAD_I2C4_SCL__HSIOMIX_PCIE_CLKREQ_B                = IOMUX_PAD(0x0478, 0x0218, 2, 0x05A0, 0, 0),
+	MX8MP_PAD_I2C4_SCL__ECSPI2_MISO                          = IOMUX_PAD(0x0478, 0x0218, 3, 0x056C, 2, 0),
+	MX8MP_PAD_I2C4_SCL__GPIO5_IO20                           = IOMUX_PAD(0x0478, 0x0218, 5, 0x0000, 0, 0),
+	MX8MP_PAD_I2C4_SCL__TPSMP_HDATA22                        = IOMUX_PAD(0x0478, 0x0218, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_I2C4_SDA__I2C4_SDA                             = IOMUX_PAD(0x047C, 0x021C, 0 | IOMUX_CONFIG_SION, 0x05C0, 5, 0),
+	MX8MP_PAD_I2C4_SDA__PWM1_OUT                             = IOMUX_PAD(0x047C, 0x021C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_I2C4_SDA__ECSPI2_SS0                           = IOMUX_PAD(0x047C, 0x021C, 3, 0x0574, 2, 0),
+	MX8MP_PAD_I2C4_SDA__GPIO5_IO21                           = IOMUX_PAD(0x047C, 0x021C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_I2C4_SDA__TPSMP_HDATA23                        = IOMUX_PAD(0x047C, 0x021C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART1_RXD__UART1_DCE_RX                        = IOMUX_PAD(0x0480, 0x0220, 0, 0x05E8, 4, 0),
+
+	MX8MP_PAD_UART1_RXD__UART1_DTE_TX                        = IOMUX_PAD(0x0480, 0x0220, 0, 0x0000, 0, 0),
+	MX8MP_PAD_UART1_RXD__ECSPI3_SCLK                         = IOMUX_PAD(0x0480, 0x0220, 1, 0x0000, 0, 0),
+	MX8MP_PAD_UART1_RXD__GPIO5_IO22                          = IOMUX_PAD(0x0480, 0x0220, 5, 0x0000, 0, 0),
+	MX8MP_PAD_UART1_RXD__TPSMP_HDATA24                       = IOMUX_PAD(0x0480, 0x0220, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART1_TXD__UART1_DCE_TX                        = IOMUX_PAD(0x0484, 0x0224, 0, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART1_TXD__UART1_DTE_RX                        = IOMUX_PAD(0x0484, 0x0224, 0, 0x05E8, 5, 0),
+	MX8MP_PAD_UART1_TXD__ECSPI3_MOSI                         = IOMUX_PAD(0x0484, 0x0224, 1, 0x0000, 0, 0),
+	MX8MP_PAD_UART1_TXD__GPIO5_IO23                          = IOMUX_PAD(0x0484, 0x0224, 5, 0x0000, 0, 0),
+	MX8MP_PAD_UART1_TXD__TPSMP_HDATA25                       = IOMUX_PAD(0x0484, 0x0224, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART2_RXD__UART2_DCE_RX                        = IOMUX_PAD(0x0488, 0x0228, 0, 0x05F0, 6, 0),
+
+	MX8MP_PAD_UART2_RXD__UART2_DTE_TX                        = IOMUX_PAD(0x0488, 0x0228, 0, 0x0000, 0, 0),
+	MX8MP_PAD_UART2_RXD__ECSPI3_MISO                         = IOMUX_PAD(0x0488, 0x0228, 1, 0x0000, 0, 0),
+	MX8MP_PAD_UART2_RXD__GPT1_COMPARE3                       = IOMUX_PAD(0x0488, 0x0228, 3, 0x0000, 0, 0),
+	MX8MP_PAD_UART2_RXD__GPIO5_IO24                          = IOMUX_PAD(0x0488, 0x0228, 5, 0x0000, 0, 0),
+	MX8MP_PAD_UART2_RXD__TPSMP_HDATA26                       = IOMUX_PAD(0x0488, 0x0228, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART2_TXD__UART2_DCE_TX                        = IOMUX_PAD(0x048C, 0x022C, 0, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART2_TXD__UART2_DTE_RX                        = IOMUX_PAD(0x048C, 0x022C, 0, 0x05F0, 7, 0),
+	MX8MP_PAD_UART2_TXD__ECSPI3_SS0                          = IOMUX_PAD(0x048C, 0x022C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_UART2_TXD__GPT1_COMPARE2                       = IOMUX_PAD(0x048C, 0x022C, 3, 0x0000, 0, 0),
+	MX8MP_PAD_UART2_TXD__GPIO5_IO25                          = IOMUX_PAD(0x048C, 0x022C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_UART2_TXD__TPSMP_HDATA27                       = IOMUX_PAD(0x048C, 0x022C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART3_RXD__UART3_DCE_RX                        = IOMUX_PAD(0x0490, 0x0230, 0, 0x05F8, 6, 0),
+
+	MX8MP_PAD_UART3_RXD__UART3_DTE_TX                        = IOMUX_PAD(0x0490, 0x0230, 0, 0x0000, 0, 0),
+	MX8MP_PAD_UART3_RXD__UART1_DCE_CTS                       = IOMUX_PAD(0x0490, 0x0230, 1, 0x0000, 0, 0),
+	MX8MP_PAD_UART3_RXD__UART1_DTE_RTS                       = IOMUX_PAD(0x0490, 0x0230, 1, 0x05E4, 4, 0),
+	MX8MP_PAD_UART3_RXD__USDHC3_RESET_B                      = IOMUX_PAD(0x0490, 0x0230, 2, 0x0000, 0, 0),
+	MX8MP_PAD_UART3_RXD__GPT1_CAPTURE2                       = IOMUX_PAD(0x0490, 0x0230, 3, 0x0598, 1, 0),
+	MX8MP_PAD_UART3_RXD__CAN2_TX                             = IOMUX_PAD(0x0490, 0x0230, 4, 0x0000, 0, 0),
+	MX8MP_PAD_UART3_RXD__GPIO5_IO26                          = IOMUX_PAD(0x0490, 0x0230, 5, 0x0000, 0, 0),
+	MX8MP_PAD_UART3_RXD__TPSMP_HDATA28                       = IOMUX_PAD(0x0490, 0x0230, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART3_TXD__UART3_DCE_TX                        = IOMUX_PAD(0x0494, 0x0234, 0, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART3_TXD__UART3_DTE_RX                        = IOMUX_PAD(0x0494, 0x0234, 0, 0x05F8, 7, 0),
+	MX8MP_PAD_UART3_TXD__UART1_DCE_RTS                       = IOMUX_PAD(0x0494, 0x0234, 1, 0x05E4, 5, 0),
+	MX8MP_PAD_UART3_TXD__UART1_DTE_CTS                       = IOMUX_PAD(0x0494, 0x0234, 1, 0x0000, 0, 0),
+	MX8MP_PAD_UART3_TXD__USDHC3_VSELECT                      = IOMUX_PAD(0x0494, 0x0234, 2, 0x0000, 0, 0),
+	MX8MP_PAD_UART3_TXD__GPT1_CLK                            = IOMUX_PAD(0x0494, 0x0234, 3, 0x059C, 1, 0),
+	MX8MP_PAD_UART3_TXD__CAN2_RX                             = IOMUX_PAD(0x0494, 0x0234, 4, 0x0550, 2, 0),
+	MX8MP_PAD_UART3_TXD__GPIO5_IO27                          = IOMUX_PAD(0x0494, 0x0234, 5, 0x0000, 0, 0),
+	MX8MP_PAD_UART3_TXD__TPSMP_HDATA29                       = IOMUX_PAD(0x0494, 0x0234, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART4_RXD__UART4_DCE_RX                        = IOMUX_PAD(0x0498, 0x0238, 0, 0x0600, 8, 0),
+
+	MX8MP_PAD_UART4_RXD__UART4_DTE_TX                        = IOMUX_PAD(0x0498, 0x0238, 0, 0x0000, 0, 0),
+	MX8MP_PAD_UART4_RXD__UART2_DCE_CTS                       = IOMUX_PAD(0x0498, 0x0238, 1, 0x0000, 0, 0),
+	MX8MP_PAD_UART4_RXD__UART2_DTE_RTS                       = IOMUX_PAD(0x0498, 0x0238, 1, 0x05EC, 4, 0),
+	MX8MP_PAD_UART4_RXD__HSIOMIX_PCIE_CLKREQ_B               = IOMUX_PAD(0x0498, 0x0238, 2, 0x05A0, 1, 0),
+	MX8MP_PAD_UART4_RXD__GPT1_COMPARE1                       = IOMUX_PAD(0x0498, 0x0238, 3, 0x0000, 0, 0),
+	MX8MP_PAD_UART4_RXD__I2C6_SCL                            = IOMUX_PAD(0x0498, 0x0238, 4 | IOMUX_CONFIG_SION, 0x05CC, 2, 0),
+	MX8MP_PAD_UART4_RXD__GPIO5_IO28                          = IOMUX_PAD(0x0498, 0x0238, 5, 0x0000, 0, 0),
+	MX8MP_PAD_UART4_RXD__TPSMP_HDATA30                       = IOMUX_PAD(0x0498, 0x0238, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART4_TXD__UART4_DCE_TX                        = IOMUX_PAD(0x049C, 0x023C, 0, 0x0000, 0, 0),
+
+	MX8MP_PAD_UART4_TXD__UART4_DTE_RX                        = IOMUX_PAD(0x049C, 0x023C, 0, 0x0600, 9, 0),
+	MX8MP_PAD_UART4_TXD__UART2_DCE_RTS                       = IOMUX_PAD(0x049C, 0x023C, 1, 0x05EC, 5, 0),
+	MX8MP_PAD_UART4_TXD__UART2_DTE_CTS                       = IOMUX_PAD(0x049C, 0x023C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_UART4_TXD__GPT1_CAPTURE1                       = IOMUX_PAD(0x049C, 0x023C, 3, 0x0594, 1, 0),
+	MX8MP_PAD_UART4_TXD__I2C6_SDA                            = IOMUX_PAD(0x049C, 0x023C, 4 | IOMUX_CONFIG_SION, 0x05D0, 2, 0),
+	MX8MP_PAD_UART4_TXD__GPIO5_IO29                          = IOMUX_PAD(0x049C, 0x023C, 5, 0x0000, 0, 0),
+	MX8MP_PAD_UART4_TXD__TPSMP_HDATA31                       = IOMUX_PAD(0x049C, 0x023C, 7, 0x0000, 0, 0),
+
+	MX8MP_PAD_HDMI_DDC_SCL__HDMIMIX_EARC_SCL                 = IOMUX_PAD(0x04A0, 0x0240, 0, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_DDC_SCL__I2C5_SCL                         = IOMUX_PAD(0x04A0, 0x0240, 3 | IOMUX_CONFIG_SION, 0x05C4, 3, 0),
+	MX8MP_PAD_HDMI_DDC_SCL__CAN1_TX                          = IOMUX_PAD(0x04A0, 0x0240, 4, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_DDC_SCL__GPIO3_IO26                       = IOMUX_PAD(0x04A0, 0x0240, 5, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_DDC_SCL__AUDIOMIX_test_out00              = IOMUX_PAD(0x04A0, 0x0240, 6, 0x0000, 0, 0),
+
+	MX8MP_PAD_HDMI_DDC_SDA__HDMIMIX_EARC_SDA                 = IOMUX_PAD(0x04A4, 0x0244, 0, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_DDC_SDA__I2C5_SDA                         = IOMUX_PAD(0x04A4, 0x0244, 3 | IOMUX_CONFIG_SION, 0x05C8, 3, 0),
+	MX8MP_PAD_HDMI_DDC_SDA__CAN1_RX                          = IOMUX_PAD(0x04A4, 0x0244, 4, 0x054C, 3, 0),
+	MX8MP_PAD_HDMI_DDC_SDA__GPIO3_IO27                       = IOMUX_PAD(0x04A4, 0x0244, 5, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_DDC_SDA__AUDIOMIX_test_out01              = IOMUX_PAD(0x04A4, 0x0244, 6, 0x0000, 0, 0),
+
+	MX8MP_PAD_HDMI_CEC__HDMIMIX_EARC_CEC                     = IOMUX_PAD(0x04A8, 0x0248, 0, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_CEC__I2C6_SCL                             = IOMUX_PAD(0x04A8, 0x0248, 3 | IOMUX_CONFIG_SION, 0x05CC, 3, 0),
+	MX8MP_PAD_HDMI_CEC__CAN2_TX                              = IOMUX_PAD(0x04A8, 0x0248, 4, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_CEC__GPIO3_IO28                           = IOMUX_PAD(0x04A8, 0x0248, 5, 0x0000, 0, 0),
+
+	MX8MP_PAD_HDMI_HPD__HDMIMIX_EARC_DC_HPD                  = IOMUX_PAD(0x04AC, 0x024C, 0, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_HPD__AUDIOMIX_EARC_HDMI_HPD_O             = IOMUX_PAD(0x04AC, 0x024C, 1, 0x0000, 0, 0),
+	MX8MP_PAD_HDMI_HPD__I2C6_SDA                             = IOMUX_PAD(0x04AC, 0x024C, 3 | IOMUX_CONFIG_SION, 0x05D0, 3, 0),
+	MX8MP_PAD_HDMI_HPD__CAN2_RX                              = IOMUX_PAD(0x04AC, 0x024C, 4, 0x0550, 3, 0),
+	MX8MP_PAD_HDMI_HPD__GPIO3_IO29                           = IOMUX_PAD(0x04AC, 0x024C, 5, 0x0000, 0, 0),
+};
+#endif  /* __ASM_ARCH_IMX8MP_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h
new file mode 100644
index 000000000..c71913f20
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h
@@ -0,0 +1,622 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8MQ_PINS_H__
+#define __ASM_ARCH_IMX8MQ_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+		IMX8MQ_PAD_GPIO1_IO00__GPIO1_IO0                    = IOMUX_PAD(0x0290, 0x0028, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT    = IOMUX_PAD(0x0290, 0x0028, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO00__XTALOSC_REF_CLK_32K          = IOMUX_PAD(0x0290, 0x0028, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO00__CCM_EXT_CLK1                 = IOMUX_PAD(0x0290, 0x0028, 6, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO00__JTAG_FAIL                    = IOMUX_PAD(0x0290, 0x0028, 7, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO01__GPIO1_IO1                    = IOMUX_PAD(0x0294, 0x002C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO01__PWM1_OUT                     = IOMUX_PAD(0x0294, 0x002C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO01__XTALOSC_REF_CLK_24M          = IOMUX_PAD(0x0294, 0x002C, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO01__CCM_EXT_CLK2                 = IOMUX_PAD(0x0294, 0x002C, 6, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO01__JTAG_ACTIVE                  = IOMUX_PAD(0x0294, 0x002C, 7, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO02__GPIO1_IO2                    = IOMUX_PAD(0x0298, 0x0030, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B                 = IOMUX_PAD(0x0298, 0x0030, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_ANY               = IOMUX_PAD(0x0298, 0x0030, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO02__JTAG_DE_B                    = IOMUX_PAD(0x0298, 0x0030, 7, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO03__GPIO1_IO3                    = IOMUX_PAD(0x029C, 0x0034, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO03__USDHC1_VSELECT               = IOMUX_PAD(0x029C, 0x0034, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO03__SDMA1_EXT_EVENT0             = IOMUX_PAD(0x029C, 0x0034, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO03__XTALOSC_XTAL_OK              = IOMUX_PAD(0x029C, 0x0034, 6, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO03__JTAG_DONE                    = IOMUX_PAD(0x029C, 0x0034, 7, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO04__GPIO1_IO4                    = IOMUX_PAD(0x02A0, 0x0038, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO04__USDHC2_VSELECT               = IOMUX_PAD(0x02A0, 0x0038, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO04__SDMA1_EXT_EVENT1             = IOMUX_PAD(0x02A0, 0x0038, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO04__XTALOSC_XTAL_OK_1V           = IOMUX_PAD(0x02A0, 0x0038, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO05__GPIO1_IO5                    = IOMUX_PAD(0x02A4, 0x003C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO05__ARM_PLATFORM_CM4_NMI         = IOMUX_PAD(0x02A4, 0x003C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO05__CCM_PMIC_READY               = IOMUX_PAD(0x02A4, 0x003C, 5, 0x04BC, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO05__SRC_INT_BOOT                 = IOMUX_PAD(0x02A4, 0x003C, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO06__GPIO1_IO6                    = IOMUX_PAD(0x02A8, 0x0040, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO06__ENET_MDC                     = IOMUX_PAD(0x02A8, 0x0040, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO06__USDHC1_CD_B                  = IOMUX_PAD(0x02A8, 0x0040, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO06__CCM_EXT_CLK3                 = IOMUX_PAD(0x02A8, 0x0040, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO07__GPIO1_IO7                    = IOMUX_PAD(0x02AC, 0x0044, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO07__ENET_MDIO                    = IOMUX_PAD(0x02AC, 0x0044, 1, 0x04C0, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO07__USDHC1_WP                    = IOMUX_PAD(0x02AC, 0x0044, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO07__CCM_EXT_CLK4                 = IOMUX_PAD(0x02AC, 0x0044, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO08__GPIO1_IO8                    = IOMUX_PAD(0x02B0, 0x0048, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO08__ENET_1588_EVENT0_IN          = IOMUX_PAD(0x02B0, 0x0048, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO08__USDHC2_RESET_B               = IOMUX_PAD(0x02B0, 0x0048, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO08__CCM_WAIT                     = IOMUX_PAD(0x02B0, 0x0048, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO09__GPIO1_IO9                    = IOMUX_PAD(0x02B4, 0x004C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO09__ENET_1588_EVENT0_OUT         = IOMUX_PAD(0x02B4, 0x004C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO09__SDMA2_EXT_EVENT0             = IOMUX_PAD(0x02B4, 0x004C, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO09__CCM_STOP                     = IOMUX_PAD(0x02B4, 0x004C, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO10__GPIO1_IO10                   = IOMUX_PAD(0x02B8, 0x0050, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO10__USB1_OTG_ID                  = IOMUX_PAD(0x02B8, 0x0050, 1, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO11__GPIO1_IO11                   = IOMUX_PAD(0x02BC, 0x0054, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO11__USB2_OTG_ID                  = IOMUX_PAD(0x02BC, 0x0054, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO11__CCM_PMIC_READY               = IOMUX_PAD(0x02BC, 0x0054, 5, 0x04BC, 1, 0),
+
+		IMX8MQ_PAD_GPIO1_IO12__GPIO1_IO12                   = IOMUX_PAD(0x02C0, 0x0058, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO12__USB1_OTG_PWR                 = IOMUX_PAD(0x02C0, 0x0058, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO12__SDMA2_EXT_EVENT1             = IOMUX_PAD(0x02C0, 0x0058, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT0           = IOMUX_PAD(0x02C0, 0x0058, 7, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO13__GPIO1_IO13                   = IOMUX_PAD(0x02C4, 0x005C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO13__USB1_OTG_OC                  = IOMUX_PAD(0x02C4, 0x005C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO13__PWM2_OUT                     = IOMUX_PAD(0x02C4, 0x005C, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT1           = IOMUX_PAD(0x02C4, 0x005C, 7, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO14__GPIO1_IO14                   = IOMUX_PAD(0x02C8, 0x0060, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO14__USB2_OTG_PWR                 = IOMUX_PAD(0x02C8, 0x0060, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO14__PWM3_OUT                     = IOMUX_PAD(0x02C8, 0x0060, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO14__CCM_CLKO1                    = IOMUX_PAD(0x02C8, 0x0060, 6, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO14__CSU_CSU_ALARM_AUT2           = IOMUX_PAD(0x02C8, 0x0060, 7, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_GPIO1_IO15__GPIO1_IO15                   = IOMUX_PAD(0x02CC, 0x0064, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO15__USB2_OTG_OC                  = IOMUX_PAD(0x02CC, 0x0064, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO15__PWM4_OUT                     = IOMUX_PAD(0x02CC, 0x0064, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO15__CCM_CLKO2                    = IOMUX_PAD(0x02CC, 0x0064, 6, 0x0000, 0, 0),
+		IMX8MQ_PAD_GPIO1_IO15__CSU_CSU_INT_DEB              = IOMUX_PAD(0x02CC, 0x0064, 7, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_MDC__ENET_MDC                       = IOMUX_PAD(0x02D0, 0x0068, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_MDC__GPIO1_IO16                     = IOMUX_PAD(0x02D0, 0x0068, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_MDIO__ENET_MDIO                     = IOMUX_PAD(0x02D4, 0x006C, 0, 0x04C0, 1, 0),
+		IMX8MQ_PAD_ENET_MDIO__GPIO1_IO17                    = IOMUX_PAD(0x02D4, 0x006C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_TD3__ENET_RGMII_TD3                 = IOMUX_PAD(0x02D8, 0x0070, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_TD3__GPIO1_IO18                     = IOMUX_PAD(0x02D8, 0x0070, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_TD2__ENET_RGMII_TD2                 = IOMUX_PAD(0x02DC, 0x0074, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_TD2__ENET_TX_CLK                    = IOMUX_PAD(0x02DC, 0x0074, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_TD2__GPIO1_IO19                     = IOMUX_PAD(0x02DC, 0x0074, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_TD1__ENET_RGMII_TD1                 = IOMUX_PAD(0x02E0, 0x0078, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_TD1__GPIO1_IO20                     = IOMUX_PAD(0x02E0, 0x0078, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_TD0__ENET_RGMII_TD0                 = IOMUX_PAD(0x02E4, 0x007C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_TD0__GPIO1_IO21                     = IOMUX_PAD(0x02E4, 0x007C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_TX_CTL__ENET_RGMII_TX_CTL           = IOMUX_PAD(0x02E8, 0x0080, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_TX_CTL__GPIO1_IO22                  = IOMUX_PAD(0x02E8, 0x0080, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_TXC__ENET_RGMII_TXC                 = IOMUX_PAD(0x02EC, 0x0084, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_TXC__ENET_TX_ER                     = IOMUX_PAD(0x02EC, 0x0084, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_TXC__GPIO1_IO23                     = IOMUX_PAD(0x02EC, 0x0084, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_RX_CTL__ENET_RGMII_RX_CTL           = IOMUX_PAD(0x02F0, 0x0088, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_RX_CTL__GPIO1_IO24                  = IOMUX_PAD(0x02F0, 0x0088, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_RXC__ENET_RGMII_RXC                 = IOMUX_PAD(0x02F4, 0x008C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_RXC__ENET_RX_ER                     = IOMUX_PAD(0x02F4, 0x008C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_RXC__GPIO1_IO25                     = IOMUX_PAD(0x02F4, 0x008C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_RD0__ENET_RGMII_RD0                 = IOMUX_PAD(0x02F8, 0x0090, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_RD0__GPIO1_IO26                     = IOMUX_PAD(0x02F8, 0x0090, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_RD1__ENET_RGMII_RD1                 = IOMUX_PAD(0x02FC, 0x0094, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_RD1__GPIO1_IO27                     = IOMUX_PAD(0x02FC, 0x0094, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_RD2__ENET_RGMII_RD2                 = IOMUX_PAD(0x0300, 0x0098, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_RD2__GPIO1_IO28                     = IOMUX_PAD(0x0300, 0x0098, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ENET_RD3__ENET_RGMII_RD3                 = IOMUX_PAD(0x0304, 0x009C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ENET_RD3__GPIO1_IO29                     = IOMUX_PAD(0x0304, 0x009C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_CLK__USDHC1_CLK                      = IOMUX_PAD(0x0308, 0x00A0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_CLK__GPIO2_IO0                       = IOMUX_PAD(0x0308, 0x00A0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_CMD__USDHC1_CMD                      = IOMUX_PAD(0x030C, 0x00A4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_CMD__GPIO2_IO1                       = IOMUX_PAD(0x030C, 0x00A4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_DATA0__USDHC1_DATA0                  = IOMUX_PAD(0x0310, 0x00A8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_DATA0__GPIO2_IO2                     = IOMUX_PAD(0x0310, 0x00A8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_DATA1__USDHC1_DATA1                  = IOMUX_PAD(0x0314, 0x00AC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_DATA1__GPIO2_IO3                     = IOMUX_PAD(0x0314, 0x00AC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_DATA2__USDHC1_DATA2                  = IOMUX_PAD(0x0318, 0x00B0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_DATA2__GPIO2_IO4                     = IOMUX_PAD(0x0318, 0x00B0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_DATA3__USDHC1_DATA3                  = IOMUX_PAD(0x031C, 0x00B4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_DATA3__GPIO2_IO5                     = IOMUX_PAD(0x031C, 0x00B4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_DATA4__USDHC1_DATA4                  = IOMUX_PAD(0x0320, 0x00B8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_DATA4__GPIO2_IO6                     = IOMUX_PAD(0x0320, 0x00B8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_DATA5__USDHC1_DATA5                  = IOMUX_PAD(0x0324, 0x00BC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_DATA5__GPIO2_IO7                     = IOMUX_PAD(0x0324, 0x00BC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6                  = IOMUX_PAD(0x0328, 0x00C0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_DATA6__GPIO2_IO8                     = IOMUX_PAD(0x0328, 0x00C0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_DATA7__USDHC1_DATA7                  = IOMUX_PAD(0x032C, 0x00C4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_DATA7__GPIO2_IO9                     = IOMUX_PAD(0x032C, 0x00C4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_RESET_B__USDHC1_RESET_B              = IOMUX_PAD(0x0330, 0x00C8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_RESET_B__GPIO2_IO10                  = IOMUX_PAD(0x0330, 0x00C8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD1_STROBE__USDHC1_STROBE                = IOMUX_PAD(0x0334, 0x00CC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD1_STROBE__GPIO2_IO11                   = IOMUX_PAD(0x0334, 0x00CC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_CD_B__USDHC2_CD_B                    = IOMUX_PAD(0x0338, 0x00D0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_CD_B__GPIO2_IO12                     = IOMUX_PAD(0x0338, 0x00D0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_CLK__USDHC2_CLK                      = IOMUX_PAD(0x033C, 0x00D4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_CLK__GPIO2_IO13                      = IOMUX_PAD(0x033C, 0x00D4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_CMD__USDHC2_CMD                      = IOMUX_PAD(0x0340, 0x00D8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_CMD__GPIO2_IO14                      = IOMUX_PAD(0x0340, 0x00D8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_DATA0__USDHC2_DATA0                  = IOMUX_PAD(0x0344, 0x00DC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_DATA0__GPIO2_IO15                    = IOMUX_PAD(0x0344, 0x00DC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_DATA1__USDHC2_DATA1                  = IOMUX_PAD(0x0348, 0x00E0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_DATA1__GPIO2_IO16                    = IOMUX_PAD(0x0348, 0x00E0, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_DATA1__CCM_WAIT                      = IOMUX_PAD(0x0348, 0x00E0, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_DATA2__USDHC2_DATA2                  = IOMUX_PAD(0x034C, 0x00E4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_DATA2__GPIO2_IO17                    = IOMUX_PAD(0x034C, 0x00E4, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_DATA2__CCM_STOP                      = IOMUX_PAD(0x034C, 0x00E4, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_DATA3__USDHC2_DATA3                  = IOMUX_PAD(0x0350, 0x00E8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_DATA3__GPIO2_IO18                    = IOMUX_PAD(0x0350, 0x00E8, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_DATA3__SRC_EARLY_RESET               = IOMUX_PAD(0x0350, 0x00E8, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_RESET_B__USDHC2_RESET_B              = IOMUX_PAD(0x0354, 0x00EC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_RESET_B__GPIO2_IO19                  = IOMUX_PAD(0x0354, 0x00EC, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_RESET_B__SRC_SYSTEM_RESET            = IOMUX_PAD(0x0354, 0x00EC, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SD2_WP__USDHC2_WP                        = IOMUX_PAD(0x0358, 0x00F0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SD2_WP__GPIO2_IO20                       = IOMUX_PAD(0x0358, 0x00F0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_ALE__RAWNAND_ALE                    = IOMUX_PAD(0x035C, 0x00F4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_ALE__QSPI_A_SCLK                    = IOMUX_PAD(0x035C, 0x00F4, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_ALE__GPIO3_IO0                      = IOMUX_PAD(0x035C, 0x00F4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_CE0_B__RAWNAND_CE0_B                = IOMUX_PAD(0x0360, 0x00F8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CE0_B__QSPI_A_SS0_B                 = IOMUX_PAD(0x0360, 0x00F8, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CE0_B__GPIO3_IO1                    = IOMUX_PAD(0x0360, 0x00F8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_CE1_B__RAWNAND_CE1_B                = IOMUX_PAD(0x0364, 0x00FC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CE1_B__QSPI_A_SS1_B                 = IOMUX_PAD(0x0364, 0x00FC, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CE1_B__GPIO3_IO2                    = IOMUX_PAD(0x0364, 0x00FC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_CE2_B__RAWNAND_CE2_B                = IOMUX_PAD(0x0368, 0x0100, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CE2_B__QSPI_B_SS0_B                 = IOMUX_PAD(0x0368, 0x0100, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CE2_B__GPIO3_IO3                    = IOMUX_PAD(0x0368, 0x0100, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_CE3_B__RAWNAND_CE3_B                = IOMUX_PAD(0x036C, 0x0104, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CE3_B__QSPI_B_SS1_B                 = IOMUX_PAD(0x036C, 0x0104, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CE3_B__GPIO3_IO4                    = IOMUX_PAD(0x036C, 0x0104, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_CLE__RAWNAND_CLE                    = IOMUX_PAD(0x0370, 0x0108, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CLE__QSPI_B_SCLK                    = IOMUX_PAD(0x0370, 0x0108, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_CLE__GPIO3_IO5                      = IOMUX_PAD(0x0370, 0x0108, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DATA00__RAWNAND_DATA00              = IOMUX_PAD(0x0374, 0x010C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA00__QSPI_A_DATA0                = IOMUX_PAD(0x0374, 0x010C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA00__GPIO3_IO6                   = IOMUX_PAD(0x0374, 0x010C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DATA01__RAWNAND_DATA01              = IOMUX_PAD(0x0378, 0x0110, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA01__QSPI_A_DATA1                = IOMUX_PAD(0x0378, 0x0110, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA01__GPIO3_IO7                   = IOMUX_PAD(0x0378, 0x0110, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DATA02__RAWNAND_DATA02              = IOMUX_PAD(0x037C, 0x0114, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA02__QSPI_A_DATA2                = IOMUX_PAD(0x037C, 0x0114, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA02__GPIO3_IO8                   = IOMUX_PAD(0x037C, 0x0114, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DATA03__RAWNAND_DATA03              = IOMUX_PAD(0x0380, 0x0118, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA03__QSPI_A_DATA3                = IOMUX_PAD(0x0380, 0x0118, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA03__GPIO3_IO9                   = IOMUX_PAD(0x0380, 0x0118, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DATA04__RAWNAND_DATA04              = IOMUX_PAD(0x0384, 0x011C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA04__QSPI_B_DATA0                = IOMUX_PAD(0x0384, 0x011C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA04__GPIO3_IO10                  = IOMUX_PAD(0x0384, 0x011C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DATA05__RAWNAND_DATA05              = IOMUX_PAD(0x0388, 0x0120, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA05__QSPI_B_DATA1                = IOMUX_PAD(0x0388, 0x0120, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA05__GPIO3_IO11                  = IOMUX_PAD(0x0388, 0x0120, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DATA06__RAWNAND_DATA06              = IOMUX_PAD(0x038C, 0x0124, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA06__QSPI_B_DATA2                = IOMUX_PAD(0x038C, 0x0124, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA06__GPIO3_IO12                  = IOMUX_PAD(0x038C, 0x0124, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DATA07__RAWNAND_DATA07              = IOMUX_PAD(0x0390, 0x0128, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA07__QSPI_B_DATA3                = IOMUX_PAD(0x0390, 0x0128, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DATA07__GPIO3_IO13                  = IOMUX_PAD(0x0390, 0x0128, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_DQS__RAWNAND_DQS                    = IOMUX_PAD(0x0394, 0x012C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DQS__QSPI_A_DQS                     = IOMUX_PAD(0x0394, 0x012C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_DQS__GPIO3_IO14                     = IOMUX_PAD(0x0394, 0x012C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_RE_B__RAWNAND_RE_B                  = IOMUX_PAD(0x0398, 0x0130, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_RE_B__QSPI_B_DQS                    = IOMUX_PAD(0x0398, 0x0130, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_RE_B__GPIO3_IO15                    = IOMUX_PAD(0x0398, 0x0130, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_READY_B__RAWNAND_READY_B            = IOMUX_PAD(0x039C, 0x0134, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_READY_B__GPIO3_IO16                 = IOMUX_PAD(0x039C, 0x0134, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_WE_B__RAWNAND_WE_B                  = IOMUX_PAD(0x03A0, 0x0138, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_WE_B__GPIO3_IO17                    = IOMUX_PAD(0x03A0, 0x0138, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_NAND_WP_B__RAWNAND_WP_B                  = IOMUX_PAD(0x03A4, 0x013C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_NAND_WP_B__GPIO3_IO18                    = IOMUX_PAD(0x03A4, 0x013C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI5_RXFS__SAI5_RX_SYNC                  = IOMUX_PAD(0x03A8, 0x0140, 0, 0x04E4, 0, 0),
+		IMX8MQ_PAD_SAI5_RXFS__SAI1_TX_DATA0                 = IOMUX_PAD(0x03A8, 0x0140, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_RXFS__GPIO3_IO19                    = IOMUX_PAD(0x03A8, 0x0140, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI5_RXC__SAI5_RX_BCLK                   = IOMUX_PAD(0x03AC, 0x0144, 0, 0x04D0, 0, 0),
+		IMX8MQ_PAD_SAI5_RXC__SAI1_TX_DATA1                  = IOMUX_PAD(0x03AC, 0x0144, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_RXC__GPIO3_IO20                     = IOMUX_PAD(0x03AC, 0x0144, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI5_RXD0__SAI5_RX_DATA0                 = IOMUX_PAD(0x03B0, 0x0148, 0, 0x04D4, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD0__SAI1_TX_DATA2                 = IOMUX_PAD(0x03B0, 0x0148, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD0__GPIO3_IO21                    = IOMUX_PAD(0x03B0, 0x0148, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI5_RXD1__SAI5_RX_DATA1                 = IOMUX_PAD(0x03B4, 0x014C, 0, 0x04D8, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD1__SAI1_TX_DATA3                 = IOMUX_PAD(0x03B4, 0x014C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD1__SAI1_TX_SYNC                  = IOMUX_PAD(0x03B4, 0x014C, 2, 0x04CC, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD1__SAI5_TX_SYNC                  = IOMUX_PAD(0x03B4, 0x014C, 3, 0x04EC, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD1__GPIO3_IO22                    = IOMUX_PAD(0x03B4, 0x014C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI5_RXD2__SAI5_RX_DATA2                 = IOMUX_PAD(0x03B8, 0x0150, 0, 0x04DC, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD2__SAI1_TX_DATA4                 = IOMUX_PAD(0x03B8, 0x0150, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD2__SAI1_TX_SYNC                  = IOMUX_PAD(0x03B8, 0x0150, 2, 0x04CC, 1, 0),
+		IMX8MQ_PAD_SAI5_RXD2__SAI5_TX_BCLK                  = IOMUX_PAD(0x03B8, 0x0150, 3, 0x04E8, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD2__GPIO3_IO23                    = IOMUX_PAD(0x03B8, 0x0150, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI5_RXD3__SAI5_RX_DATA3                 = IOMUX_PAD(0x03BC, 0x0154, 0, 0x04E0, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD3__SAI1_TX_DATA5                 = IOMUX_PAD(0x03BC, 0x0154, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD3__SAI1_TX_SYNC                  = IOMUX_PAD(0x03BC, 0x0154, 2, 0x04CC, 2, 0),
+		IMX8MQ_PAD_SAI5_RXD3__SAI5_TX_DATA0                 = IOMUX_PAD(0x03BC, 0x0154, 3, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_RXD3__GPIO3_IO24                    = IOMUX_PAD(0x03BC, 0x0154, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI5_MCLK__SAI5_MCLK                     = IOMUX_PAD(0x03C0, 0x0158, 0, 0x052C, 0, 0),
+		IMX8MQ_PAD_SAI5_MCLK__SAI1_TX_BCLK                  = IOMUX_PAD(0x03C0, 0x0158, 1, 0x04C8, 0, 0),
+		IMX8MQ_PAD_SAI5_MCLK__SAI4_MCLK                     = IOMUX_PAD(0x03C0, 0x0158, 2, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_MCLK__GPIO3_IO25                    = IOMUX_PAD(0x03C0, 0x0158, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI5_MCLK__SRC_TESTER_ACK                = IOMUX_PAD(0x03C0, 0x0158, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXFS__SAI1_RX_SYNC                  = IOMUX_PAD(0x03C4, 0x015C, 0, 0x04C4, 0, 0),
+		IMX8MQ_PAD_SAI1_RXFS__SAI5_RX_SYNC                  = IOMUX_PAD(0x03C4, 0x015C, 1, 0x04E4, 1, 0),
+		IMX8MQ_PAD_SAI1_RXFS__ARM_PLATFORM_TRACE_CLK        = IOMUX_PAD(0x03C4, 0x015C, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXFS__GPIO4_IO0                     = IOMUX_PAD(0x03C4, 0x015C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXC__SAI1_RX_BCLK                   = IOMUX_PAD(0x03C8, 0x0160, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXC__SAI5_RX_BCLK                   = IOMUX_PAD(0x03C8, 0x0160, 1, 0x04D0, 1, 0),
+		IMX8MQ_PAD_SAI1_RXC__ARM_PLATFORM_TRACE_CTL         = IOMUX_PAD(0x03C8, 0x0160, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXC__GPIO4_IO1                      = IOMUX_PAD(0x03C8, 0x0160, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXD0__SAI1_RX_DATA0                 = IOMUX_PAD(0x03CC, 0x0164, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD0__SAI5_RX_DATA0                 = IOMUX_PAD(0x03CC, 0x0164, 1, 0x04D4, 1, 0),
+		IMX8MQ_PAD_SAI1_RXD0__ARM_PLATFORM_TRACE0           = IOMUX_PAD(0x03CC, 0x0164, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD0__GPIO4_IO2                     = IOMUX_PAD(0x03CC, 0x0164, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD0__SRC_BOOT_CFG0                 = IOMUX_PAD(0x03CC, 0x0164, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXD1__SAI1_RX_DATA1                 = IOMUX_PAD(0x03D0, 0x0168, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD1__SAI5_RX_DATA1                 = IOMUX_PAD(0x03D0, 0x0168, 1, 0x04D8, 1, 0),
+		IMX8MQ_PAD_SAI1_RXD1__ARM_PLATFORM_TRACE1           = IOMUX_PAD(0x03D0, 0x0168, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD1__GPIO4_IO3                     = IOMUX_PAD(0x03D0, 0x0168, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD1__SRC_BOOT_CFG1                 = IOMUX_PAD(0x03D0, 0x0168, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXD2__SAI1_RX_DATA2                 = IOMUX_PAD(0x03D4, 0x016C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD2__SAI5_RX_DATA2                 = IOMUX_PAD(0x03D4, 0x016C, 1, 0x04DC, 1, 0),
+		IMX8MQ_PAD_SAI1_RXD2__ARM_PLATFORM_TRACE2           = IOMUX_PAD(0x03D4, 0x016C, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD2__GPIO4_IO4                     = IOMUX_PAD(0x03D4, 0x016C, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD2__SRC_BOOT_CFG2                 = IOMUX_PAD(0x03D4, 0x016C, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXD3__SAI1_RX_DATA3                 = IOMUX_PAD(0x03D8, 0x0170, 0, 0x04E0, 1, 0),
+		IMX8MQ_PAD_SAI1_RXD3__SAI5_RX_DATA3                 = IOMUX_PAD(0x03D8, 0x0170, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD3__ARM_PLATFORM_TRACE3           = IOMUX_PAD(0x03D8, 0x0170, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD3__GPIO4_IO5                     = IOMUX_PAD(0x03D8, 0x0170, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD3__SRC_BOOT_CFG3                 = IOMUX_PAD(0x03D8, 0x0170, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXD4__SAI1_RX_DATA4                 = IOMUX_PAD(0x03DC, 0x0174, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD4__SAI6_TX_BCLK                  = IOMUX_PAD(0x03DC, 0x0174, 1, 0x051C, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD4__SAI6_RX_BCLK                  = IOMUX_PAD(0x03DC, 0x0174, 2, 0x0510, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD4__ARM_PLATFORM_TRACE4           = IOMUX_PAD(0x03DC, 0x0174, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD4__GPIO4_IO6                     = IOMUX_PAD(0x03DC, 0x0174, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD4__SRC_BOOT_CFG4                 = IOMUX_PAD(0x03DC, 0x0174, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXD5__SAI1_RX_DATA5                 = IOMUX_PAD(0x03E0, 0x0178, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD5__SAI6_TX_DATA0                 = IOMUX_PAD(0x03E0, 0x0178, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD5__SAI6_RX_DATA0                 = IOMUX_PAD(0x03E0, 0x0178, 2, 0x0514, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD5__SAI1_RX_SYNC                  = IOMUX_PAD(0x03E0, 0x0178, 3, 0x04C4, 1, 0),
+		IMX8MQ_PAD_SAI1_RXD5__ARM_PLATFORM_TRACE5           = IOMUX_PAD(0x03E0, 0x0178, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD5__GPIO4_IO7                     = IOMUX_PAD(0x03E0, 0x0178, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD5__SRC_BOOT_CFG5                 = IOMUX_PAD(0x03E0, 0x0178, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXD6__SAI1_RX_DATA6                 = IOMUX_PAD(0x03E4, 0x017C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD6__SAI6_TX_SYNC                  = IOMUX_PAD(0x03E4, 0x017C, 1, 0x0520, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD6__SAI6_RX_SYNC                  = IOMUX_PAD(0x03E4, 0x017C, 2, 0x0518, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD6__ARM_PLATFORM_TRACE6           = IOMUX_PAD(0x03E4, 0x017C, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD6__GPIO4_IO8                     = IOMUX_PAD(0x03E4, 0x017C, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD6__SRC_BOOT_CFG6                 = IOMUX_PAD(0x03E4, 0x017C, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_RXD7__SAI1_RX_DATA7                 = IOMUX_PAD(0x03E8, 0x0180, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD7__SAI6_MCLK                     = IOMUX_PAD(0x03E8, 0x0180, 1, 0x0530, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD7__SAI1_TX_SYNC                  = IOMUX_PAD(0x03E8, 0x0180, 2, 0x04CC, 4, 0),
+		IMX8MQ_PAD_SAI1_RXD7__SAI1_TX_DATA4                 = IOMUX_PAD(0x03E8, 0x0180, 3, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD7__ARM_PLATFORM_TRACE7           = IOMUX_PAD(0x03E8, 0x0180, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD7__GPIO4_IO9                     = IOMUX_PAD(0x03E8, 0x0180, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_RXD7__SRC_BOOT_CFG7                 = IOMUX_PAD(0x03E8, 0x0180, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXFS__SAI1_TX_SYNC                  = IOMUX_PAD(0x03EC, 0x0184, 0, 0x04CC, 3, 0),
+		IMX8MQ_PAD_SAI1_TXFS__SAI5_TX_SYNC                  = IOMUX_PAD(0x03EC, 0x0184, 1, 0x04EC, 1, 0),
+		IMX8MQ_PAD_SAI1_TXFS__ARM_PLATFORM_EVENTO           = IOMUX_PAD(0x03EC, 0x0184, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXFS__GPIO4_IO10                    = IOMUX_PAD(0x03EC, 0x0184, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXC__SAI1_TX_BCLK                   = IOMUX_PAD(0x03F0, 0x0188, 0, 0x04C8, 1, 0),
+		IMX8MQ_PAD_SAI1_TXC__SAI5_TX_BCLK                   = IOMUX_PAD(0x03F0, 0x0188, 1, 0x04E8, 1, 0),
+		IMX8MQ_PAD_SAI1_TXC__ARM_PLATFORM_EVENTI            = IOMUX_PAD(0x03F0, 0x0188, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXC__GPIO4_IO11                     = IOMUX_PAD(0x03F0, 0x0188, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXD0__SAI1_TX_DATA0                 = IOMUX_PAD(0x03F4, 0x018C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD0__SAI5_TX_DATA0                 = IOMUX_PAD(0x03F4, 0x018C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD0__ARM_PLATFORM_TRACE8           = IOMUX_PAD(0x03F4, 0x018C, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD0__GPIO4_IO12                    = IOMUX_PAD(0x03F4, 0x018C, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD0__SRC_BOOT_CFG8                 = IOMUX_PAD(0x03F4, 0x018C, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXD1__SAI1_TX_DATA1                 = IOMUX_PAD(0x03F8, 0x0190, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD1__SAI5_TX_DATA1                 = IOMUX_PAD(0x03F8, 0x0190, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD1__ARM_PLATFORM_TRACE9           = IOMUX_PAD(0x03F8, 0x0190, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD1__GPIO4_IO13                    = IOMUX_PAD(0x03F8, 0x0190, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD1__SRC_BOOT_CFG9                 = IOMUX_PAD(0x03F8, 0x0190, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXD2__SAI1_TX_DATA2                 = IOMUX_PAD(0x03FC, 0x0194, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD2__SAI5_TX_DATA2                 = IOMUX_PAD(0x03FC, 0x0194, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD2__ARM_PLATFORM_TRACE10          = IOMUX_PAD(0x03FC, 0x0194, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD2__GPIO4_IO14                    = IOMUX_PAD(0x03FC, 0x0194, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD2__SRC_BOOT_CFG10                = IOMUX_PAD(0x03FC, 0x0194, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXD3__SAI1_TX_DATA3                 = IOMUX_PAD(0x0400, 0x0198, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD3__SAI5_TX_DATA3                 = IOMUX_PAD(0x0400, 0x0198, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD3__ARM_PLATFORM_TRACE11          = IOMUX_PAD(0x0400, 0x0198, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD3__GPIO4_IO15                    = IOMUX_PAD(0x0400, 0x0198, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD3__SRC_BOOT_CFG11                = IOMUX_PAD(0x0400, 0x0198, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXD4__SAI1_TX_DATA4                 = IOMUX_PAD(0x0404, 0x019C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD4__SAI6_RX_BCLK                  = IOMUX_PAD(0x0404, 0x019C, 1, 0x0510, 1, 0),
+		IMX8MQ_PAD_SAI1_TXD4__SAI6_TX_BCLK                  = IOMUX_PAD(0x0404, 0x019C, 2, 0x051C, 1, 0),
+		IMX8MQ_PAD_SAI1_TXD4__ARM_PLATFORM_TRACE12          = IOMUX_PAD(0x0404, 0x019C, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD4__GPIO4_IO16                    = IOMUX_PAD(0x0404, 0x019C, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD4__SRC_BOOT_CFG12                = IOMUX_PAD(0x0404, 0x019C, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXD5__SAI1_TX_DATA5                 = IOMUX_PAD(0x0408, 0x01A0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD5__SAI6_RX_DATA0                 = IOMUX_PAD(0x0408, 0x01A0, 1, 0x0514, 1, 0),
+		IMX8MQ_PAD_SAI1_TXD5__SAI6_TX_DATA0                 = IOMUX_PAD(0x0408, 0x01A0, 2, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD5__ARM_PLATFORM_TRACE13          = IOMUX_PAD(0x0408, 0x01A0, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD5__GPIO4_IO17                    = IOMUX_PAD(0x0408, 0x01A0, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD5__SRC_BOOT_CFG13                = IOMUX_PAD(0x0408, 0x01A0, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXD6__SAI1_TX_DATA6                 = IOMUX_PAD(0x040C, 0x01A4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD6__SAI6_RX_SYNC                  = IOMUX_PAD(0x040C, 0x01A4, 1, 0x0518, 1, 0),
+		IMX8MQ_PAD_SAI1_TXD6__SAI6_TX_SYNC                  = IOMUX_PAD(0x040C, 0x01A4, 2, 0x0520, 1, 0),
+		IMX8MQ_PAD_SAI1_TXD6__ARM_PLATFORM_TRACE14          = IOMUX_PAD(0x040C, 0x01A4, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD6__GPIO4_IO18                    = IOMUX_PAD(0x040C, 0x01A4, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD6__SRC_BOOT_CFG14                = IOMUX_PAD(0x040C, 0x01A4, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_TXD7__SAI1_TX_DATA7                 = IOMUX_PAD(0x0410, 0x01A8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD7__SAI6_MCLK                     = IOMUX_PAD(0x0410, 0x01A8, 1, 0x0530, 1, 0),
+		IMX8MQ_PAD_SAI1_TXD7__ARM_PLATFORM_TRACE15          = IOMUX_PAD(0x0410, 0x01A8, 4, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD7__GPIO4_IO19                    = IOMUX_PAD(0x0410, 0x01A8, 5, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_TXD7__SRC_BOOT_CFG15                = IOMUX_PAD(0x0410, 0x01A8, 6, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI1_MCLK__SAI1_MCLK                     = IOMUX_PAD(0x0414, 0x01AC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI1_MCLK__SAI5_MCLK                     = IOMUX_PAD(0x0414, 0x01AC, 1, 0x052C, 1, 0),
+		IMX8MQ_PAD_SAI1_MCLK__SAI1_TX_BCLK                  = IOMUX_PAD(0x0414, 0x01AC, 2, 0x04C8, 2, 0),
+		IMX8MQ_PAD_SAI1_MCLK__GPIO4_IO20                    = IOMUX_PAD(0x0414, 0x01AC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI2_RXFS__SAI2_RX_SYNC                  = IOMUX_PAD(0x0418, 0x01B0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_RXFS__SAI5_TX_SYNC                  = IOMUX_PAD(0x0418, 0x01B0, 1, 0x04EC, 2, 0),
+		IMX8MQ_PAD_SAI2_RXFS__GPIO4_IO21                    = IOMUX_PAD(0x0418, 0x01B0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI2_RXC__SAI2_RX_BCLK                   = IOMUX_PAD(0x041C, 0x01B4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_RXC__SAI5_TX_BCLK                   = IOMUX_PAD(0x041C, 0x01B4, 1, 0x04E8, 2, 0),
+		IMX8MQ_PAD_SAI2_RXC__GPIO4_IO22                     = IOMUX_PAD(0x041C, 0x01B4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI2_RXD0__SAI2_RX_DATA0                 = IOMUX_PAD(0x0420, 0x01B8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_RXD0__SAI5_TX_DATA0                 = IOMUX_PAD(0x0420, 0x01B8, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_RXD0__GPIO4_IO23                    = IOMUX_PAD(0x0420, 0x01B8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI2_TXFS__SAI2_TX_SYNC                  = IOMUX_PAD(0x0424, 0x01BC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_TXFS__SAI5_TX_DATA1                 = IOMUX_PAD(0x0424, 0x01BC, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_TXFS__GPIO4_IO24                    = IOMUX_PAD(0x0424, 0x01BC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI2_TXC__SAI2_TX_BCLK                   = IOMUX_PAD(0x0428, 0x01C0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_TXC__SAI5_TX_DATA2                  = IOMUX_PAD(0x0428, 0x01C0, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_TXC__GPIO4_IO25                     = IOMUX_PAD(0x0428, 0x01C0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI2_TXD0__SAI2_TX_DATA0                 = IOMUX_PAD(0x042C, 0x01C4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_TXD0__SAI5_TX_DATA3                 = IOMUX_PAD(0x042C, 0x01C4, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_TXD0__GPIO4_IO26                    = IOMUX_PAD(0x042C, 0x01C4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI2_MCLK__SAI2_MCLK                     = IOMUX_PAD(0x0430, 0x01C8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI2_MCLK__SAI5_MCLK                     = IOMUX_PAD(0x0430, 0x01C8, 1, 0x052C, 2, 0),
+		IMX8MQ_PAD_SAI2_MCLK__GPIO4_IO27                    = IOMUX_PAD(0x0430, 0x01C8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI3_RXFS__SAI3_RX_SYNC                  = IOMUX_PAD(0x0434, 0x01CC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_RXFS__GPT1_CAPTURE1                 = IOMUX_PAD(0x0434, 0x01CC, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_RXFS__SAI5_RX_SYNC                  = IOMUX_PAD(0x0434, 0x01CC, 2, 0x04E4, 2, 0),
+		IMX8MQ_PAD_SAI3_RXFS__GPIO4_IO28                    = IOMUX_PAD(0x0434, 0x01CC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI3_RXC__SAI3_RX_BCLK                   = IOMUX_PAD(0x0438, 0x01D0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_RXC__GPT1_CAPTURE2                  = IOMUX_PAD(0x0438, 0x01D0, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_RXC__SAI5_RX_BCLK                   = IOMUX_PAD(0x0438, 0x01D0, 2, 0x04D0, 2, 0),
+		IMX8MQ_PAD_SAI3_RXC__GPIO4_IO29                     = IOMUX_PAD(0x0438, 0x01D0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI3_RXD__SAI3_RX_DATA0                  = IOMUX_PAD(0x043C, 0x01D4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_RXD__GPT1_COMPARE1                  = IOMUX_PAD(0x043C, 0x01D4, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_RXD__SAI5_RX_DATA0                  = IOMUX_PAD(0x043C, 0x01D4, 2, 0x04D4, 2, 0),
+		IMX8MQ_PAD_SAI3_RXD__GPIO4_IO30                     = IOMUX_PAD(0x043C, 0x01D4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI3_TXFS__SAI3_TX_SYNC                  = IOMUX_PAD(0x0440, 0x01D8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_TXFS__GPT1_CLK                      = IOMUX_PAD(0x0440, 0x01D8, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_TXFS__SAI5_RX_DATA1                 = IOMUX_PAD(0x0440, 0x01D8, 2, 0x04D8, 2, 0),
+		IMX8MQ_PAD_SAI3_TXFS__GPIO4_IO31                    = IOMUX_PAD(0x0440, 0x01D8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI3_TXC__SAI3_TX_BCLK                   = IOMUX_PAD(0x0444, 0x01DC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_TXC__GPT1_COMPARE2                  = IOMUX_PAD(0x0444, 0x01DC, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_TXC__SAI5_RX_DATA2                  = IOMUX_PAD(0x0444, 0x01DC, 2, 0x04DC, 2, 0),
+		IMX8MQ_PAD_SAI3_TXC__GPIO5_IO0                      = IOMUX_PAD(0x0444, 0x01DC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI3_TXD__SAI3_TX_DATA0                  = IOMUX_PAD(0x0448, 0x01E0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_TXD__GPT1_COMPARE3                  = IOMUX_PAD(0x0448, 0x01E0, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_TXD__SAI5_RX_DATA3                  = IOMUX_PAD(0x0448, 0x01E0, 2, 0x04E0, 2, 0),
+		IMX8MQ_PAD_SAI3_TXD__GPIO5_IO1                      = IOMUX_PAD(0x0448, 0x01E0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SAI3_MCLK__SAI3_MCLK                     = IOMUX_PAD(0x044C, 0x01E4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_MCLK__PWM4_OUT                      = IOMUX_PAD(0x044C, 0x01E4, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SAI3_MCLK__SAI5_MCLK                     = IOMUX_PAD(0x044C, 0x01E4, 2, 0x052C, 3, 0),
+		IMX8MQ_PAD_SAI3_MCLK__GPIO5_IO2                     = IOMUX_PAD(0x044C, 0x01E4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SPDIF_TX__SPDIF1_OUT                     = IOMUX_PAD(0x0450, 0x01E8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SPDIF_TX__PWM3_OUT                       = IOMUX_PAD(0x0450, 0x01E8, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SPDIF_TX__GPIO5_IO3                      = IOMUX_PAD(0x0450, 0x01E8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SPDIF_RX__SPDIF1_IN                      = IOMUX_PAD(0x0454, 0x01EC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SPDIF_RX__PWM2_OUT                       = IOMUX_PAD(0x0454, 0x01EC, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SPDIF_RX__GPIO5_IO4                      = IOMUX_PAD(0x0454, 0x01EC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_SPDIF_EXT_CLK__SPDIF1_EXT_CLK            = IOMUX_PAD(0x0458, 0x01F0, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_SPDIF_EXT_CLK__PWM1_OUT                  = IOMUX_PAD(0x0458, 0x01F0, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_SPDIF_EXT_CLK__GPIO5_IO5                 = IOMUX_PAD(0x0458, 0x01F0, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ECSPI1_SCLK__ECSPI1_SCLK                 = IOMUX_PAD(0x045C, 0x01F4, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ECSPI1_SCLK__UART3_RX                    = IOMUX_PAD(0x045C, 0x01F4, 1, 0x0504, 0, 0),
+		IMX8MQ_PAD_ECSPI1_SCLK__GPIO5_IO6                   = IOMUX_PAD(0x045C, 0x01F4, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ECSPI1_MOSI__ECSPI1_MOSI                 = IOMUX_PAD(0x0460, 0x01F8, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ECSPI1_MOSI__UART3_TX                    = IOMUX_PAD(0x0460, 0x01F8, 1, 0x0504, 1, 0),
+		IMX8MQ_PAD_ECSPI1_MOSI__GPIO5_IO7                   = IOMUX_PAD(0x0460, 0x01F8, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ECSPI1_MISO__ECSPI1_MISO                 = IOMUX_PAD(0x0464, 0x01FC, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ECSPI1_MISO__UART3_CTS_B                 = IOMUX_PAD(0x0464, 0x01FC, 1, 0x0500, 0, 0),
+		IMX8MQ_PAD_ECSPI1_MISO__GPIO5_IO8                   = IOMUX_PAD(0x0464, 0x01FC, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ECSPI1_SS0__ECSPI1_SS0                   = IOMUX_PAD(0x0468, 0x0200, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ECSPI1_SS0__UART3_RTS_B                  = IOMUX_PAD(0x0468, 0x0200, 1, 0x0500, 1, 0),
+		IMX8MQ_PAD_ECSPI1_SS0__GPIO5_IO9                    = IOMUX_PAD(0x0468, 0x0200, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ECSPI2_SCLK__ECSPI2_SCLK                 = IOMUX_PAD(0x046C, 0x0204, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ECSPI2_SCLK__UART4_RX                    = IOMUX_PAD(0x046C, 0x0204, 1, 0x050C, 0, 0),
+		IMX8MQ_PAD_ECSPI2_SCLK__GPIO5_IO10                  = IOMUX_PAD(0x046C, 0x0204, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ECSPI2_MOSI__ECSPI2_MOSI                 = IOMUX_PAD(0x0470, 0x0208, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ECSPI2_MOSI__UART4_TX                    = IOMUX_PAD(0x0470, 0x0208, 1, 0x050C, 1, 0),
+		IMX8MQ_PAD_ECSPI2_MOSI__GPIO5_IO11                  = IOMUX_PAD(0x0470, 0x0208, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ECSPI2_MISO__ECSPI2_MISO                 = IOMUX_PAD(0x0474, 0x020C, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ECSPI2_MISO__UART4_CTS_B                 = IOMUX_PAD(0x0474, 0x020C, 1, 0x0508, 0, 0),
+		IMX8MQ_PAD_ECSPI2_MISO__GPIO5_IO12                  = IOMUX_PAD(0x0474, 0x020C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_ECSPI2_SS0__ECSPI2_SS0                   = IOMUX_PAD(0x0478, 0x0210, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_ECSPI2_SS0__UART4_RTS_B                  = IOMUX_PAD(0x0478, 0x0210, 1, 0x0508, 1, 0),
+		IMX8MQ_PAD_ECSPI2_SS0__GPIO5_IO13                   = IOMUX_PAD(0x0478, 0x0210, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_I2C1_SCL__I2C1_SCL                       = IOMUX_PAD(0x047C, 0x0214, 0x10 | 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C1_SCL__ENET_MDC                       = IOMUX_PAD(0x047C, 0x0214, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14                     = IOMUX_PAD(0x047C, 0x0214, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_I2C1_SDA__I2C1_SDA                       = IOMUX_PAD(0x0480, 0x0218, 0x10 | 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C1_SDA__ENET_MDIO                      = IOMUX_PAD(0x0480, 0x0218, 1, 0x04C0, 2, 0),
+		IMX8MQ_PAD_I2C1_SDA__GPIO5_IO15                     = IOMUX_PAD(0x0480, 0x0218, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_I2C2_SCL__I2C2_SCL                       = IOMUX_PAD(0x0484, 0x021C, 0x10 | 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C2_SCL__ENET_1588_EVENT1_IN            = IOMUX_PAD(0x0484, 0x021C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C2_SCL__GPIO5_IO16                     = IOMUX_PAD(0x0484, 0x021C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_I2C2_SDA__I2C2_SDA                       = IOMUX_PAD(0x0488, 0x0220, 0x10 | 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C2_SDA__ENET_1588_EVENT1_OUT           = IOMUX_PAD(0x0488, 0x0220, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C2_SDA__GPIO5_IO17                     = IOMUX_PAD(0x0488, 0x0220, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_I2C3_SCL__I2C3_SCL                       = IOMUX_PAD(0x048C, 0x0224, 0x10 | 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C3_SCL__PWM4_OUT                       = IOMUX_PAD(0x048C, 0x0224, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C3_SCL__GPT2_CLK                       = IOMUX_PAD(0x048C, 0x0224, 2, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C3_SCL__GPIO5_IO18                     = IOMUX_PAD(0x048C, 0x0224, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_I2C3_SDA__I2C3_SDA                       = IOMUX_PAD(0x0490, 0x0228, 0x10 | 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C3_SDA__PWM3_OUT                       = IOMUX_PAD(0x0490, 0x0228, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C3_SDA__GPT3_CLK                       = IOMUX_PAD(0x0490, 0x0228, 2, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C3_SDA__GPIO5_IO19                     = IOMUX_PAD(0x0490, 0x0228, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_I2C4_SCL__I2C4_SCL                       = IOMUX_PAD(0x0494, 0x022C, 0x10 | 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C4_SCL__PWM2_OUT                       = IOMUX_PAD(0x0494, 0x022C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C4_SCL__PCIE1_CLKREQ_B                 = IOMUX_PAD(0x0494, 0x022C, 2, 0x0524, 0, 0),
+		IMX8MQ_PAD_I2C4_SCL__GPIO5_IO20                     = IOMUX_PAD(0x0494, 0x022C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_I2C4_SDA__I2C4_SDA                       = IOMUX_PAD(0x0498, 0x0230, 0x10 | 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C4_SDA__PWM1_OUT                       = IOMUX_PAD(0x0498, 0x0230, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_I2C4_SDA__PCIE2_CLKREQ_B                 = IOMUX_PAD(0x0498, 0x0230, 2, 0x0528, 0, 0),
+		IMX8MQ_PAD_I2C4_SDA__GPIO5_IO21                     = IOMUX_PAD(0x0498, 0x0230, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_UART1_RXD__UART1_RX                      = IOMUX_PAD(0x049C, 0x0234, 0, 0x04F4, 0, 0),
+		IMX8MQ_PAD_UART1_RXD__ECSPI3_SCLK                   = IOMUX_PAD(0x049C, 0x0234, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_UART1_RXD__GPIO5_IO22                    = IOMUX_PAD(0x049C, 0x0234, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_UART1_TXD__UART1_TX                      = IOMUX_PAD(0x04A0, 0x0238, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_UART1_TXD__ECSPI3_MOSI                   = IOMUX_PAD(0x04A0, 0x0238, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_UART1_TXD__GPIO5_IO23                    = IOMUX_PAD(0x04A0, 0x0238, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_UART2_RXD__UART2_RX                      = IOMUX_PAD(0x04A4, 0x023C, 0, 0x04FC, 0, 0),
+		IMX8MQ_PAD_UART2_RXD__ECSPI3_MISO                   = IOMUX_PAD(0x04A4, 0x023C, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_UART2_RXD__GPIO5_IO24                    = IOMUX_PAD(0x04A4, 0x023C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_UART2_TXD__UART2_TX                      = IOMUX_PAD(0x04A8, 0x0240, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_UART2_TXD__ECSPI3_SS0                    = IOMUX_PAD(0x04A8, 0x0240, 1, 0x0000, 0, 0),
+		IMX8MQ_PAD_UART2_TXD__GPIO5_IO25                    = IOMUX_PAD(0x04A8, 0x0240, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_UART3_RXD__UART3_RX                      = IOMUX_PAD(0x04AC, 0x0244, 0, 0x0504, 2, 0),
+		IMX8MQ_PAD_UART3_RXD__UART1_CTS_B                   = IOMUX_PAD(0x04AC, 0x0244, 1, 0x04F0, 0, 0),
+		IMX8MQ_PAD_UART3_RXD__GPIO5_IO26                    = IOMUX_PAD(0x04AC, 0x0244, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_UART3_TXD__UART3_TX                      = IOMUX_PAD(0x04B0, 0x0248, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_UART3_TXD__UART1_RTS_B                   = IOMUX_PAD(0x04B0, 0x0248, 1, 0x04F0, 1, 0),
+		IMX8MQ_PAD_UART3_TXD__GPIO5_IO27                    = IOMUX_PAD(0x04B0, 0x0248, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_UART4_RXD__UART4_RX                      = IOMUX_PAD(0x04B4, 0x024C, 0, 0x050C, 2, 0),
+		IMX8MQ_PAD_UART4_RXD__UART2_CTS_B                   = IOMUX_PAD(0x04B4, 0x024C, 1, 0x04F8, 0, 0),
+		IMX8MQ_PAD_UART4_RXD__PCIE1_CLKREQ_B                = IOMUX_PAD(0x04B4, 0x024C, 2, 0x0524, 1, 0),
+		IMX8MQ_PAD_UART4_RXD__GPIO5_IO28                    = IOMUX_PAD(0x04B4, 0x024C, 5, 0x0000, 0, 0),
+
+		IMX8MQ_PAD_UART4_TXD__UART4_TX                      = IOMUX_PAD(0x04B8, 0x0250, 0, 0x0000, 0, 0),
+		IMX8MQ_PAD_UART4_TXD__UART2_RTS_B                   = IOMUX_PAD(0x04B8, 0x0250, 1, 0x04F8, 1, 0),
+		IMX8MQ_PAD_UART4_TXD__PCIE2_CLKREQ_B                = IOMUX_PAD(0x04B8, 0x0250, 2, 0x0528, 1, 0),
+		IMX8MQ_PAD_UART4_TXD__GPIO5_IO29                    = IOMUX_PAD(0x04B8, 0x0250, 5, 0x0000, 0, 0),
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/lpddr4_define.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/lpddr4_define.h
new file mode 100644
index 000000000..caf5bafb6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/lpddr4_define.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __LPDDR4_DEFINE_H_
+#define __LPDDR4_DEFINE_H_
+
+#define LPDDR4_DVFS_DBI
+#define DDR_ONE_RANK
+/* #define LPDDR4_DBI_ON */
+#define DFI_BUG_WR
+#define M845S_4GBx2
+#define PRETRAIN
+
+/* DRAM MR setting */
+#ifdef LPDDR4_DBI_ON
+#define LPDDR4_MR3			0xf1
+#define LPDDR4_PHY_DMIPinPresent	0x1
+#else
+#define LPDDR4_MR3			0x31
+#define LPDDR4_PHY_DMIPinPresent	0x0
+#endif
+
+#ifdef DDR_ONE_RANK
+#define LPDDR4_CS			0x1
+#else
+#define LPDDR4_CS			0x3
+#endif
+
+/* PHY training feature */
+#define LPDDR4_HDT_CTL_2D		0xC8
+#define LPDDR4_HDT_CTL_3200_1D		0xC8
+#define LPDDR4_HDT_CTL_400_1D		0xC8
+#define LPDDR4_HDT_CTL_100_1D		0xC8
+
+/* 400/100 training seq */
+#define LPDDR4_TRAIN_SEQ_P2		0x121f
+#define LPDDR4_TRAIN_SEQ_P1		0x121f
+#define LPDDR4_TRAIN_SEQ_P0		0x121f
+#define LPDDR4_TRAIN_SEQ_100		0x121f
+#define LPDDR4_TRAIN_SEQ_400		0x121f
+
+/* 2D share & weight */
+#define LPDDR4_2D_WEIGHT		0x1f7f
+#define LPDDR4_2D_SHARE			1
+#define LPDDR4_CATRAIN_3200_1d		0
+#define LPDDR4_CATRAIN_400		0
+#define LPDDR4_CATRAIN_100		0
+#define LPDDR4_CATRAIN_3200_2d		0
+
+/* MRS parameter */
+/* for LPDDR4 Rtt */
+#define LPDDR4_RTT40			6
+#define LPDDR4_RTT48			5
+#define LPDDR4_RTT60			4
+#define LPDDR4_RTT80			3
+#define LPDDR4_RTT120			2
+#define LPDDR4_RTT240			1
+#define LPDDR4_RTT_DIS			0
+
+/* for LPDDR4 Ron */
+#define LPDDR4_RON34			7
+#define LPDDR4_RON40			6
+#define LPDDR4_RON48			5
+#define LPDDR4_RON60			4
+#define LPDDR4_RON80			3
+
+#define LPDDR4_PHY_ADDR_RON60		0x1
+#define LPDDR4_PHY_ADDR_RON40		0x3
+#define LPDDR4_PHY_ADDR_RON30		0x7
+#define LPDDR4_PHY_ADDR_RON24		0xf
+#define LPDDR4_PHY_ADDR_RON20		0x1f
+
+/* for read channel */
+#define LPDDR4_RON			LPDDR4_RON40
+#define LPDDR4_PHY_RTT			30
+#define LPDDR4_PHY_VREF_VALUE		17
+
+/* for write channel */
+#define LPDDR4_PHY_RON			30
+#define LPDDR4_PHY_ADDR_RON		LPDDR4_PHY_ADDR_RON40
+#define LPDDR4_RTT_DQ			LPDDR4_RTT40
+#define LPDDR4_RTT_CA			LPDDR4_RTT40
+#define LPDDR4_RTT_CA_BANK0		LPDDR4_RTT40
+#define LPDDR4_RTT_CA_BANK1		LPDDR4_RTT40
+#define LPDDR4_VREF_VALUE_CA		((1 << 6) | (0xd))
+#define LPDDR4_VREF_VALUE_DQ_RANK0	((1 << 6) | (0xd))
+#define LPDDR4_VREF_VALUE_DQ_RANK1	((1 << 6) | (0xd))
+#define LPDDR4_MR22_RANK0		((0 << 5) | (1 << 4) | (0 << 3) | \
+					(LPDDR4_RTT40))
+#define LPDDR4_MR22_RANK1		((1 << 5) | (1 << 4) | (1 << 3) | \
+					(LPDDR4_RTT40))
+
+#define LPDDR4_MR3_PU_CAL		1
+
+#endif /* __LPDDR4_DEFINE_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/power-domain.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/power-domain.h
new file mode 100644
index 000000000..7a833e564
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/power-domain.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017 NXP
+ */
+
+#ifndef _ASM_ARCH_IMX8M_POWER_DOMAIN_H
+#define _ASM_ARCH_IMX8M_POWER_DOMAIN_H
+
+struct imx8m_power_domain_plat {
+	int resource_id;
+	int has_pd;
+	struct power_domain pd;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imx8m/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-imx8m/sys_proto.h
new file mode 100644
index 000000000..d328542ec
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imx8m/sys_proto.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 NXP
+ */
+
+#ifndef __ARCH_IMX8M_SYS_PROTO_H
+#define __ARCH_NMX8M_SYS_PROTO_H
+
+#include <asm/mach-imx/sys_proto.h>
+
+void set_wdog_reset(struct wdog_regs *wdog);
+void enable_tzc380(void);
+void restore_boot_params(void);
+extern unsigned long rom_pointer[];
+enum boot_device get_boot_device(void);
+bool is_usb_boot(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imxrt/clock.h b/roms/u-boot/arch/arm/include/asm/arch-imxrt/clock.h
new file mode 100644
index 000000000..7409028b9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imxrt/clock.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imxrt/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-imxrt/gpio.h
new file mode 100644
index 000000000..da31a7438
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imxrt/gpio.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+/* GPIO registers */
+struct gpio_regs {
+	u32 gpio_dr;	/* data */
+	u32 gpio_dir;	/* direction */
+	u32 gpio_psr;	/* pad satus */
+};
+#endif
+
+#endif /* __ASM_ARCH_GPIO_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imxrt/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-imxrt/imx-regs.h
new file mode 100644
index 000000000..d01e6ca2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imxrt/imx-regs.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright(C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define ARCH_MXC
+
+#define GPIO1_BASE_ADDR		0x401B8000
+#define GPIO2_BASE_ADDR		0x401BC000
+#define GPIO3_BASE_ADDR		0x401C0000
+#define GPIO4_BASE_ADDR		0x401C4000
+#define GPIO5_BASE_ADDR		0x400C0000
+
+#define ANATOP_BASE_ADDR	0x400d8000
+
+#define MXS_LCDIF_BASE		0x402b8000
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/mach-imx/regs-lcdif.h>
+#endif
+
+#define USB_BASE_ADDR		0x402E0000
+#define USB_PHY0_BASE_ADDR	0x400D9000
+#define USB_PHY1_BASE_ADDR	0x400DA000
+
+#endif /* __ASM_ARCH_IMX_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imxrt/imxrt.h b/roms/u-boot/arch/arm/include/asm/arch-imxrt/imxrt.h
new file mode 100644
index 000000000..1cb2c57d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imxrt/imxrt.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef _ASM_ARCH_IMXRT_H
+#define _ASM_ARCH_IMXRT_H
+
+#endif /* _ASM_ARCH_IMXRT_H */
+
diff --git a/roms/u-boot/arch/arm/include/asm/arch-imxrt/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-imxrt/sys_proto.h
new file mode 100644
index 000000000..eb878e672
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-imxrt/sys_proto.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 NXP
+ */
+
+#ifndef _ASM_ARCH_SYS_PROTO_H
+#define _ASM_ARCH_SYS_PROTO_H
+
+#include <asm/mach-imx/sys_proto.h>
+
+#endif /* _ASM_ARCH_SYS_PROTO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/clk.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/clk.h
new file mode 100644
index 000000000..5ab48a9d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/clk.h
@@ -0,0 +1,186 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#ifndef _LPC32XX_CLK_H
+#define _LPC32XX_CLK_H
+
+#include <asm/types.h>
+
+#define OSC_CLK_FREQUENCY	13000000
+#define RTC_CLK_FREQUENCY	32768
+
+/* Clocking and Power Control Registers */
+struct clk_pm_regs {
+	u32 reserved0[5];
+	u32 boot_map;		/* Boot Map Control Register		*/
+	u32 p0_intr_er;		/* Port 0/1 Start and Interrupt Enable	*/
+	u32 usbdiv_ctrl;	/* USB Clock Pre-Divide Register	*/
+	/* Internal Start Signal Sources Registers	*/
+	u32 start_er_int;	/* Start Enable Register		*/
+	u32 start_rsr_int;	/* Start Raw Status Register		*/
+	u32 start_sr_int;	/* Start Status Register		*/
+	u32 start_apr_int;	/* Start Activation Polarity Register	*/
+	/* Device Pin Start Signal Sources Registers	*/
+	u32 start_er_pin;	/* Start Enable Register		*/
+	u32 start_rsr_pin;	/* Start Raw Status Register		*/
+	u32 start_sr_pin;	/* Start Status Register		*/
+	u32 start_apr_pin;	/* Start Activation Polarity Register	*/
+	/* Clock Control Registers			*/
+	u32 hclkdiv_ctrl;	/* HCLK Divider Control Register	*/
+	u32 pwr_ctrl;		/* Power Control Register		*/
+	u32 pll397_ctrl;	/* PLL397 Control Register		*/
+	u32 osc_ctrl;		/* Main Oscillator Control Register	*/
+	u32 sysclk_ctrl;	/* SYSCLK Control Register		*/
+	u32 lcdclk_ctrl;	/* LCD Clock Control Register		*/
+	u32 hclkpll_ctrl;	/* HCLK PLL Control Register		*/
+	u32 reserved1;
+	u32 adclk_ctrl1;	/* ADC Clock Control1 Register		*/
+	u32 usb_ctrl;		/* USB Control Register			*/
+	u32 sdramclk_ctrl;	/* SDRAM Clock Control Register		*/
+	u32 ddr_lap_nom;	/* DDR Calibration Nominal Value	*/
+	u32 ddr_lap_count;	/* DDR Calibration Measured Value	*/
+	u32 ddr_cal_delay;	/* DDR Calibration Delay Value		*/
+	u32 ssp_ctrl;		/* SSP Control Register			*/
+	u32 i2s_ctrl;		/* I2S Clock Control Register		*/
+	u32 ms_ctrl;		/* Memory Card Control Register		*/
+	u32 reserved2[3];
+	u32 macclk_ctrl;	/* Ethernet MAC Clock Control Register	*/
+	u32 reserved3[4];
+	u32 test_clk;		/* Test Clock Selection Register	*/
+	u32 sw_int;		/* Software Interrupt Register		*/
+	u32 i2cclk_ctrl;	/* I2C Clock Control Register		*/
+	u32 keyclk_ctrl;	/* Keyboard Scan Clock Control Register	*/
+	u32 adclk_ctrl;		/* ADC Clock Control Register		*/
+	u32 pwmclk_ctrl;	/* PWM Clock Control Register		*/
+	u32 timclk_ctrl;	/* Watchdog and Highspeed Timer Control */
+	u32 timclk_ctrl1;	/* Motor and Timer Clock Control	*/
+	u32 spi_ctrl;		/* SPI Control Register			*/
+	u32 flashclk_ctrl;	/* NAND Flash Clock Control Register	*/
+	u32 reserved4;
+	u32 u3clk;		/* UART 3 Clock Control Register	*/
+	u32 u4clk;		/* UART 4 Clock Control Register	*/
+	u32 u5clk;		/* UART 5 Clock Control Register	*/
+	u32 u6clk;		/* UART 6 Clock Control Register	*/
+	u32 irdaclk;		/* IrDA Clock Control Register		*/
+	u32 uartclk_ctrl;	/* UART Clock Control Register		*/
+	u32 dmaclk_ctrl;	/* DMA Clock Control Register		*/
+	u32 autoclk_ctrl;	/* Autoclock Control Register		*/
+};
+
+/* HCLK Divider Control Register bits */
+#define CLK_HCLK_DDRAM_MASK		(0x3 << 7)
+#define CLK_HCLK_DDRAM_HALF		(0x2 << 7)
+#define CLK_HCLK_DDRAM_NOMINAL		(0x1 << 7)
+#define CLK_HCLK_DDRAM_STOPPED		(0x0 << 7)
+#define CLK_HCLK_PERIPH_DIV_MASK	(0x1F << 2)
+#define CLK_HCLK_PERIPH_DIV(n)		((((n) - 1) & 0x1F) << 2)
+#define CLK_HCLK_ARM_PLL_DIV_MASK	(0x3 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_4		(0x2 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_2		(0x1 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_1		(0x0 << 0)
+
+/* Power Control Register bits */
+#define CLK_PWR_HCLK_RUN_PERIPH		(1 << 10)
+#define CLK_PWR_EMC_SREFREQ		(1 << 9)
+#define CLK_PWR_EMC_SREFREQ_UPDATE	(1 << 8)
+#define CLK_PWR_SDRAM_SREFREQ		(1 << 7)
+#define CLK_PWR_HIGHCORE_LEVEL		(1 << 5)
+#define CLK_PWR_SYSCLKEN_LEVEL		(1 << 4)
+#define CLK_PWR_SYSCLKEN_CTRL		(1 << 3)
+#define CLK_PWR_NORMAL_RUN		(1 << 2)
+#define CLK_PWR_HIGHCORE_CTRL		(1 << 1)
+#define CLK_PWR_STOP_MODE		(1 << 0)
+
+/* SYSCLK Control Register bits */
+#define CLK_SYSCLK_PLL397		(1 << 1)
+#define CLK_SYSCLK_MUX			(1 << 0)
+
+/* HCLK PLL Control Register bits */
+#define CLK_HCLK_PLL_OPERATING		(1 << 16)
+#define CLK_HCLK_PLL_BYPASS		(1 << 15)
+#define CLK_HCLK_PLL_DIRECT		(1 << 14)
+#define CLK_HCLK_PLL_FEEDBACK		(1 << 13)
+#define CLK_HCLK_PLL_POSTDIV_MASK	(0x3 << 11)
+#define CLK_HCLK_PLL_POSTDIV_16		(0x3 << 11)
+#define CLK_HCLK_PLL_POSTDIV_8		(0x2 << 11)
+#define CLK_HCLK_PLL_POSTDIV_4		(0x1 << 11)
+#define CLK_HCLK_PLL_POSTDIV_2		(0x0 << 11)
+#define CLK_HCLK_PLL_PREDIV_MASK	(0x3 << 9)
+#define CLK_HCLK_PLL_PREDIV_4		(0x3 << 9)
+#define CLK_HCLK_PLL_PREDIV_3		(0x2 << 9)
+#define CLK_HCLK_PLL_PREDIV_2		(0x1 << 9)
+#define CLK_HCLK_PLL_PREDIV_1		(0x0 << 9)
+#define CLK_HCLK_PLL_FEEDBACK_DIV_MASK	(0xFF << 1)
+#define CLK_HCLK_PLL_FEEDBACK_DIV(n)	((((n) - 1) & 0xFF) << 1)
+#define CLK_HCLK_PLL_LOCKED		(1 << 0)
+
+/* Ethernet MAC Clock Control Register bits	*/
+#define CLK_MAC_RMII			(0x3 << 3)
+#define CLK_MAC_MII			(0x1 << 3)
+#define CLK_MAC_MASTER			(1 << 2)
+#define CLK_MAC_SLAVE			(1 << 1)
+#define CLK_MAC_REG			(1 << 0)
+
+/* I2C Clock Control Register bits	*/
+#define CLK_I2C2_ENABLE			(1 << 1)
+#define CLK_I2C1_ENABLE			(1 << 0)
+
+/* Timer Clock Control1 Register bits */
+#define CLK_TIMCLK_MOTOR		(1 << 6)
+#define CLK_TIMCLK_TIMER3		(1 << 5)
+#define CLK_TIMCLK_TIMER2		(1 << 4)
+#define CLK_TIMCLK_TIMER1		(1 << 3)
+#define CLK_TIMCLK_TIMER0		(1 << 2)
+#define CLK_TIMCLK_TIMER5		(1 << 1)
+#define CLK_TIMCLK_TIMER4		(1 << 0)
+
+/* Timer Clock Control Register bits */
+#define CLK_TIMCLK_HSTIMER		(1 << 1)
+#define CLK_TIMCLK_WATCHDOG		(1 << 0)
+
+/* UART Clock Control Register bits */
+#define CLK_UART(n)			(1 << ((n) - 3))
+
+/* UARTn Clock Select Registers bits */
+#define CLK_UART_HCLK			(1 << 16)
+#define CLK_UART_X_DIV(n)		(((n) & 0xFF) << 8)
+#define CLK_UART_Y_DIV(n)		(((n) & 0xFF) << 0)
+
+/* DMA Clock Control Register bits */
+#define CLK_DMA_ENABLE			(1 << 0)
+
+/* NAND Clock Control Register bits */
+#define CLK_NAND_SLC			(1 << 0)
+#define CLK_NAND_MLC			(1 << 1)
+#define CLK_NAND_SLC_SELECT		(1 << 2)
+#define CLK_NAND_MLC_INT		(1 << 5)
+
+/* SSP Clock Control Register bits */
+#define CLK_SSP0_ENABLE_CLOCK		(1 << 0)
+
+/* SDRAMCLK register bits */
+#define CLK_SDRAM_DDR_SEL		(1 << 1)
+
+/* USB control register definitions */
+#define CLK_USBCTRL_PLL_STS		(1 << 0)
+#define CLK_USBCTRL_FDBK_PLUS1(n)	(((n) & 0xFF) << 1)
+#define CLK_USBCTRL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
+#define CLK_USBCTRL_PLL_PWRUP		(1 << 16)
+#define CLK_USBCTRL_CLK_EN1		(1 << 17)
+#define CLK_USBCTRL_CLK_EN2		(1 << 18)
+#define CLK_USBCTRL_BUS_KEEPER		(0x1 << 19)
+#define CLK_USBCTRL_USBHSTND_EN		(1 << 21)
+#define CLK_USBCTRL_USBDVND_EN		(1 << 22)
+#define CLK_USBCTRL_HCLK_EN		(1 << 24)
+
+unsigned int get_sys_clk_rate(void);
+unsigned int get_hclk_pll_rate(void);
+unsigned int get_hclk_clk_div(void);
+unsigned int get_hclk_clk_rate(void);
+unsigned int get_periph_clk_div(void);
+unsigned int get_periph_clk_rate(void);
+unsigned int get_sdram_clk_rate(void);
+
+#endif /* _LPC32XX_CLK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/config.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/config.h
new file mode 100644
index 000000000..0836091af
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Common definitions for LPC32XX board configurations
+ *
+ * Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#ifndef _LPC32XX_CONFIG_H
+#define _LPC32XX_CONFIG_H
+
+
+/* Basic CPU architecture */
+
+/* UART configuration */
+#if	(CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
+	(CONFIG_SYS_LPC32XX_UART == 7)
+#if !defined(CONFIG_LPC32XX_HSUART)
+#define CONFIG_LPC32XX_HSUART
+#endif
+#endif
+
+#if !defined(CONFIG_SYS_NS16550_CLK)
+#define CONFIG_SYS_NS16550_CLK		13000000
+#endif
+
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+		{ 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
+
+/* Ethernet */
+#define LPC32XX_ETH_BASE ETHERNET_BASE
+
+/* NAND */
+#if defined(CONFIG_NAND_LPC32XX_SLC)
+#define NAND_LARGE_BLOCK_PAGE_SIZE	0x800
+#define NAND_SMALL_BLOCK_PAGE_SIZE	0x200
+
+#if !defined(CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE	NAND_LARGE_BLOCK_PAGE_SIZE
+#endif
+
+#if (CONFIG_SYS_NAND_PAGE_SIZE == NAND_LARGE_BLOCK_PAGE_SIZE)
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
+					  48, 49, 50, 51, 52, 53, 54, 55, \
+					  56, 57, 58, 59, 60, 61, 62, 63, }
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#elif (CONFIG_SYS_NAND_PAGE_SIZE == NAND_SMALL_BLOCK_PAGE_SIZE)
+#define CONFIG_SYS_NAND_OOBSIZE		16
+#define CONFIG_SYS_NAND_ECCPOS		{ 10, 11, 12, 13, 14, 15, }
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#else
+#error "CONFIG_SYS_NAND_PAGE_SIZE set to an invalid value"
+#endif
+
+#define CONFIG_SYS_NAND_ECCSIZE		0x100
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
+						CONFIG_SYS_NAND_PAGE_SIZE)
+#endif	/* CONFIG_NAND_LPC32XX_SLC */
+
+/* NOR Flash */
+
+/* USB OHCI */
+#if defined(CONFIG_USB_OHCI_LPC32XX)
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		USB_BASE
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"lpc32xx-ohci"
+#endif
+
+#endif /* _LPC32XX_CONFIG_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/cpu.h
new file mode 100644
index 000000000..7e0b781e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/cpu.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#ifndef _LPC32XX_CPU_H
+#define _LPC32XX_CPU_H
+
+/* LPC32XX Memory map */
+
+/* AHB physical base addresses */
+#define SLC_NAND_BASE	0x20020000	/* SLC NAND Flash registers base    */
+#define SSP0_BASE	0x20084000	/* SSP0 registers base              */
+#define SD_CARD_BASE	0x20098000	/* SD card interface registers base */
+#define MLC_NAND_BASE	0x200A8000	/* MLC NAND Flash registers base    */
+#define DMA_BASE	0x31000000	/* DMA controller registers base    */
+#define USB_BASE	0x31020000	/* USB registers base               */
+#define LCD_BASE	0x31040000	/* LCD registers base               */
+#define ETHERNET_BASE	0x31060000	/* Ethernet registers base          */
+#define EMC_BASE	0x31080000	/* EMC configuration registers base */
+
+/* FAB peripherals base addresses */
+#define CLK_PM_BASE	0x40004000	/* System control registers base    */
+#define HS_UART1_BASE	0x40014000	/* High speed UART 1 registers base */
+#define HS_UART2_BASE	0x40018000	/* High speed UART 2 registers base */
+#define HS_UART7_BASE	0x4001C000	/* High speed UART 7 registers base */
+#define RTC_BASE	0x40024000	/* RTC registers base               */
+#define GPIO_BASE	0x40028000	/* GPIO registers base              */
+#define MUX_BASE	0x40028000	/* MUX registers base               */
+#define WDT_BASE	0x4003C000	/* Watchdog timer registers base    */
+#define TIMER0_BASE	0x40044000	/* Timer0 registers base            */
+#define TIMER1_BASE	0x4004C000	/* Timer1 registers base            */
+#define UART_CTRL_BASE	0x40054000	/* UART control regsisters base     */
+
+/* APB peripherals base addresses */
+#define UART3_BASE	0x40080000	/* UART 3 registers base            */
+#define UART4_BASE	0x40088000	/* UART 4 registers base            */
+#define UART5_BASE	0x40090000	/* UART 5 registers base            */
+#define UART6_BASE	0x40098000	/* UART 6 registers base            */
+#define I2C1_BASE	0x400A0000	/* I2C  1 registers base            */
+#define I2C2_BASE	0x400A8000	/* I2C  2 registers base            */
+
+/* External SDRAM Memory Bank base addresses */
+#define EMC_DYCS0_BASE	0x80000000	/* SDRAM DYCS0 base address         */
+#define EMC_DYCS1_BASE	0xA0000000	/* SDRAM DYCS1 base address         */
+
+/* External Static Memory Bank base addresses */
+#define EMC_CS0_BASE	0xE0000000
+#define EMC_CS1_BASE	0xE1000000
+#define EMC_CS2_BASE	0xE2000000
+#define EMC_CS3_BASE	0xE3000000
+
+#endif /* _LPC32XX_CPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/dma.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/dma.h
new file mode 100644
index 000000000..d69e3c466
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/dma.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * LPC32xx DMA Controller Interface
+ *
+ * Copyright (C) 2008 by NXP Semiconductors
+ * @Author: Kevin Wells
+ * @Descr: Definitions for LPC3250 chip
+ * @References: NXP LPC3250 User's Guide
+ */
+
+#ifndef _LPC32XX_DMA_H
+#define _LPC32XX_DMA_H
+
+/*
+ * DMA linked list structure used with a channel's LLI register;
+ * refer to UM10326, "LPC32x0 and LPC32x0/01 User manual" - Rev. 3
+ * tables 84, 85, 86 & 87 for details.
+ */
+struct lpc32xx_dmac_ll {
+	u32 dma_src;
+	u32 dma_dest;
+	u32 next_lli;
+	u32 next_ctrl;
+};
+
+/* control register definitions */
+#define DMAC_CHAN_INT_TC_EN	(1 << 31) /* channel terminal count interrupt */
+#define DMAC_CHAN_DEST_AUTOINC	(1 << 27) /* automatic destination increment */
+#define DMAC_CHAN_SRC_AUTOINC	(1 << 26) /* automatic source increment */
+#define DMAC_CHAN_DEST_AHB1	(1 << 25) /* AHB1 master for dest. transfer */
+#define DMAC_CHAN_DEST_WIDTH_32	(1 << 22) /* Destination data width selection */
+#define DMAC_CHAN_SRC_WIDTH_32	(1 << 19) /* Source data width selection */
+#define DMAC_CHAN_DEST_BURST_1	0
+#define DMAC_CHAN_DEST_BURST_4	(1 << 15) /* Destination data burst size */
+#define DMAC_CHAN_SRC_BURST_1	0
+#define DMAC_CHAN_SRC_BURST_4	(1 << 12) /* Source data burst size */
+
+/*
+ * config_ch register definitions
+ * DMAC_CHAN_FLOW_D_xxx: flow control with DMA as the controller
+ * DMAC_DEST_PERIP: Macro for loading destination peripheral
+ * DMAC_SRC_PERIP: Macro for loading source peripheral
+ */
+#define DMAC_CHAN_FLOW_D_M2P	(0x1 << 11)
+#define DMAC_CHAN_FLOW_D_P2M	(0x2 << 11)
+#define DMAC_DEST_PERIP(n)	(((n) & 0x1F) << 6)
+#define DMAC_SRC_PERIP(n)	(((n) & 0x1F) << 1)
+
+/*
+ * config_ch register definitions
+ * (source and destination peripheral ID numbers).
+ * These can be used with the DMAC_DEST_PERIP and DMAC_SRC_PERIP macros.
+ */
+#define DMA_PERID_NAND1		1
+
+/* Channel enable bit */
+#define DMAC_CHAN_ENABLE	(1 << 0)
+
+int lpc32xx_dma_get_channel(void);
+int lpc32xx_dma_start_xfer(unsigned int channel,
+			   const struct lpc32xx_dmac_ll *desc, u32 config);
+int lpc32xx_dma_wait_status(unsigned int channel);
+
+#endif /* _LPC32XX_DMA_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/emc.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/emc.h
new file mode 100644
index 000000000..20698a3d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/emc.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#ifndef _LPC32XX_EMC_H
+#define _LPC32XX_EMC_H
+
+#include <asm/types.h>
+
+/* EMC Registers */
+struct emc_regs {
+	u32 ctrl;		/* Controls operation of the EMC             */
+	u32 status;		/* Provides EMC status information           */
+	u32 config;		/* Configures operation of the EMC           */
+	u32 reserved0[5];
+	u32 control;		/* Controls dyn memory operation             */
+	u32 refresh;		/* Configures dyn memory refresh operation   */
+	u32 read_config;	/* Configures the dyn memory read strategy   */
+	u32 reserved1;
+	u32 t_rp;		/* Precharge command period                  */
+	u32 t_ras;		/* Active to precharge command period        */
+	u32 t_srex;		/* Self-refresh exit time                    */
+	u32 reserved2[2];
+	u32 t_wr;		/* Write recovery time                       */
+	u32 t_rc;		/* Active to active command period           */
+	u32 t_rfc;		/* Auto-refresh period                       */
+	u32 t_xsr;		/* Exit self-refresh to active command time  */
+	u32 t_rrd;		/* Active bank A to active bank B latency    */
+	u32 t_mrd;		/* Load mode register to active command time */
+	u32 t_cdlr;		/* Last data in to read command time         */
+	u32 reserved3[8];
+	u32 extended_wait;	/* time for static memory rd/wr transfers    */
+	u32 reserved4[31];
+	u32 config0;		/* Configuration information for the SDRAM   */
+	u32 rascas0;		/* RAS and CAS latencies for the SDRAM       */
+	u32 reserved5[6];
+	u32 config1;		/* Configuration information for the SDRAM   */
+	u32 rascas1;		/* RAS and CAS latencies for the SDRAM       */
+	u32 reserved6[54];
+	struct emc_stat_t {
+		u32 config;	/* Static memory configuration               */
+		u32 waitwen;	/* Delay from chip select to write enable    */
+		u32 waitoen;	/* Delay to output enable                    */
+		u32 waitrd;	/* Delay to a read access                    */
+		u32 waitpage;	/* Delay for async page mode read            */
+		u32 waitwr;	/* Delay to a write access                   */
+		u32 waitturn;	/* Number of bus turnaround cycles           */
+		u32 reserved;
+	} stat[4];
+	u32 reserved7[96];
+	struct emc_ahb_t {
+		u32 control;	/* Control register for AHB                  */
+		u32 status;	/* Status register for AHB                   */
+		u32 timeout;	/* Timeout register for AHB                  */
+		u32 reserved[5];
+	} ahb[5];
+};
+
+/* Static Memory Configuration Register bits */
+#define EMC_STAT_CONFIG_WP		(1 << 20)
+#define EMC_STAT_CONFIG_EW		(1 << 8)
+#define EMC_STAT_CONFIG_PB		(1 << 7)
+#define EMC_STAT_CONFIG_PC		(1 << 6)
+#define EMC_STAT_CONFIG_PM		(1 << 3)
+#define EMC_STAT_CONFIG_32BIT		(2 << 0)
+#define EMC_STAT_CONFIG_16BIT		(1 << 0)
+#define EMC_STAT_CONFIG_8BIT		(0 << 0)
+
+/* Static Memory Delay Registers */
+#define EMC_STAT_WAITWEN(n)		(((n) - 1) & 0x0F)
+#define EMC_STAT_WAITOEN(n)		((n) & 0x0F)
+#define EMC_STAT_WAITRD(n)		(((n) - 1) & 0x1F)
+#define EMC_STAT_WAITPAGE(n)		(((n) - 1) & 0x1F)
+#define EMC_STAT_WAITWR(n)		(((n) - 2) & 0x1F)
+#define EMC_STAT_WAITTURN(n)		(((n) - 1) & 0x0F)
+
+/* EMC settings for DRAM */
+struct emc_dram_settings {
+	u32	cmddelay;
+	u32	config0;
+	u32	rascas0;
+	u32	rdconfig;
+	u32	trp;
+	u32	tras;
+	u32	tsrex;
+	u32	twr;
+	u32	trc;
+	u32	trfc;
+	u32	txsr;
+	u32	trrd;
+	u32	tmrd;
+	u32	tcdlr;
+	u32	refresh;
+	u32	mode;
+	u32	emode;
+};
+
+#endif /* _LPC32XX_EMC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/gpio.h
new file mode 100644
index 000000000..93e7a8875
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/gpio.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * LPC32xx GPIO interface
+ *
+ * (C) Copyright 2014  DENX Software Engineering GmbH
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ */
+
+/**
+ * GPIO Register map for LPC32xx
+ */
+
+struct gpio_regs {
+	u32 p3_inp_state;
+	u32 p3_outp_set;
+	u32 p3_outp_clr;
+	u32 p3_outp_state;
+	/* Watch out! the following are shared between p2 and p3 */
+	u32 p2_p3_dir_set;
+	u32 p2_p3_dir_clr;
+	u32 p2_p3_dir_state;
+	/* Now back to 'one register for one port' */
+	u32 p2_inp_state;
+	u32 p2_outp_set;
+	u32 p2_outp_clr;
+	u32 reserved1[6];
+	u32 p0_inp_state;
+	u32 p0_outp_set;
+	u32 p0_outp_clr;
+	u32 p0_outp_state;
+	u32 p0_dir_set;
+	u32 p0_dir_clr;
+	u32 p0_dir_state;
+	u32 reserved2;
+	u32 p1_inp_state;
+	u32 p1_outp_set;
+	u32 p1_outp_clr;
+	u32 p1_outp_state;
+	u32 p1_dir_set;
+	u32 p1_dir_clr;
+	u32 p1_dir_state;
+};
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/gpio_grp.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/gpio_grp.h
new file mode 100644
index 000000000..762bbeee0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/gpio_grp.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * LPC32xx GPIO interface macro for pin mapping.
+ *
+ * (C) Copyright 2015  DENX Software Engineering GmbH
+ * Written-by: Sylvain Lemieux <slemieux@@tycoint.com>
+ */
+
+#ifndef _LPC32XX_GPIO_GRP_H
+#define _LPC32XX_GPIO_GRP_H
+
+/*
+ * Macro to map the pin for the lpc32xx_gpio driver.
+ * Note: - GPIOS are considered here as homogeneous and linear from 0 to 159;
+ *         mapping is done per register, as group of 32.
+ *         (see drivers/gpio/lpc32xx_gpio.c for details).
+ *       - macros can be use with the following pins:
+ *         P0.0 - P0.7
+ *         P1.0 - P1.23
+ *         P2.0 - P2.12
+ *         P3 GPI_0 - GPI_9 / GPI_15 - GPI_23 / GPI_25 / GPI_27 - GPI_28
+ *         P3 GPO_0 - GPO_23
+ *         P3 GPIO_0 - GPIO_5 (output register only)
+ */
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP 32
+#define LPC32XX_GPIO_P2_GRP 64
+#define LPC32XX_GPO_P3_GRP  96
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPO_P3_GRP + 25)
+#define LPC32XX_GPI_P3_GRP  128
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO P0.1 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P0_GRP, 1)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+#endif /* _LPC32XX_GPIO_GRP_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/i2c.h
new file mode 100644
index 000000000..3918178d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/i2c.h
@@ -0,0 +1,36 @@
+#ifndef _LPC32XX_I2C_H
+#define _LPC32XX_I2C_H
+
+#include <asm/types.h>
+
+/* i2c register set */
+struct lpc32xx_i2c_base {
+	union {
+		u32 rx;
+		u32 tx;
+	};
+	u32 stat;
+	u32 ctrl;
+	u32 clk_hi;
+	u32 clk_lo;
+	u32 adr;
+	u32 rxfl;
+	u32 txfl;
+	u32 rxb;
+	u32 txb;
+	u32 stx;
+	u32 stxfl;
+};
+
+#if CONFIG_IS_ENABLED(DM_I2C)
+enum {
+	I2C_0, I2C_1, I2C_2,
+};
+
+struct lpc32xx_i2c_dev {
+	struct lpc32xx_i2c_base *base;
+	int index;
+	uint speed;
+};
+#endif /* CONFIG_DM_I2C */
+#endif /* _LPC32XX_I2C_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/mux.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/mux.h
new file mode 100644
index 000000000..d661e8236
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/mux.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * LPC32xx MUX interface
+ *
+ * (C) Copyright 2015  DENX Software Engineering GmbH
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ */
+
+/**
+ * MUX register map for LPC32xx
+ */
+
+struct mux_regs {
+	u32 reserved1[10];
+	u32 p2_mux_set;
+	u32 p2_mux_clr;
+	u32 p2_mux_state;
+	u32 reserved2[51];
+	u32 p_mux_set;
+	u32 p_mux_clr;
+	u32 p_mux_state;
+	u32 reserved3;
+	u32 p3_mux_set;
+	u32 p3_mux_clr;
+	u32 p3_mux_state;
+	u32 reserved4;
+	u32 p0_mux_set;
+	u32 p0_mux_clr;
+	u32 p0_mux_state;
+	u32 reserved5;
+	u32 p1_mux_set;
+	u32 p1_mux_clr;
+	u32 p1_mux_state;
+};
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
new file mode 100644
index 000000000..4675dc3c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#ifndef _LPC32XX_SYS_PROTO_H
+#define _LPC32XX_SYS_PROTO_H
+
+#include <asm/arch/emc.h>
+
+void lpc32xx_uart_init(unsigned int uart_id);
+void lpc32xx_dma_init(void);
+void lpc32xx_mac_init(void);
+void lpc32xx_mlc_nand_init(void);
+void lpc32xx_slc_nand_init(void);
+void lpc32xx_i2c_init(unsigned int devnum);
+void lpc32xx_ssp_init(void);
+void lpc32xx_usb_init(void);
+#if defined(CONFIG_SPL_BUILD)
+void ddr_init(const struct emc_dram_settings *dram);
+#endif
+#endif /* _LPC32XX_SYS_PROTO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/timer.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/timer.h
new file mode 100644
index 000000000..302bd6bab
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/timer.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#ifndef _LPC32XX_TIMER_H
+#define _LPC32XX_TIMER_H
+
+#include <asm/types.h>
+
+/* Timer/Counter Registers */
+struct timer_regs {
+	u32 ir;			/* Interrupt Register		*/
+	u32 tcr;		/* Timer Control Register	*/
+	u32 tc;			/* Timer Counter		*/
+	u32 pr;			/* Prescale Register		*/
+	u32 pc;			/* Prescale Counter		*/
+	u32 mcr;		/* Match Control Register	*/
+	u32 mr[4];		/* Match Registers		*/
+	u32 ccr;		/* Capture Control Register	*/
+	u32 cr[4];		/* Capture Registers		*/
+	u32 emr;		/* External Match Register	*/
+	u32 reserved[12];
+	u32 ctcr;		/* Count Control Register	*/
+};
+
+/* Timer/Counter Interrupt Register bits */
+#define TIMER_IR_CR(n)			(1 << ((n) + 4))
+#define TIMER_IR_MR(n)			(1 << (n))
+
+/* Timer/Counter Timer Control Register bits */
+#define TIMER_TCR_COUNTER_RESET		(1 << 1)
+#define TIMER_TCR_COUNTER_ENABLE	(1 << 0)
+#define TIMER_TCR_COUNTER_DISABLE	(0 << 0)
+
+/* Timer/Counter Match Control Register bits */
+#define TIMER_MCR_STOP(n)		(1 << (3 * (n) + 2))
+#define TIMER_MCR_RESET(n)		(1 << (3 * (n) + 1))
+#define TIMER_MCR_INTERRUPT(n)		(1 << (3 * (n)))
+
+/* Timer/Counter Capture Control Register bits */
+#define TIMER_CCR_INTERRUPT(n)		(1 << (3 * (n) + 2))
+#define TIMER_CCR_FALLING_EDGE(n)	(1 << (3 * (n) + 1))
+#define TIMER_CCR_RISING_EDGE(n)	(1 << (3 * (n)))
+
+/* Timer/Counter External Match Register bits */
+#define TIMER_EMR_EMC_TOGGLE(n)		(0x3 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_SET(n)		(0x2 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_CLEAR(n)		(0x1 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_NOTHING(n)	(0x0 << (2 * (n) + 4))
+#define TIMER_EMR_EM(n)			(1 << (n))
+
+/* Timer/Counter Count Control Register bits */
+#define TIMER_CTCR_INPUT(n)		((n) << 2)
+#define TIMER_CTCR_MODE_COUNTER_BOTH	(0x3 << 0)
+#define TIMER_CTCR_MODE_COUNTER_FALLING	(0x2 << 0)
+#define TIMER_CTCR_MODE_COUNTER_RISING	(0x1 << 0)
+#define TIMER_CTCR_MODE_TIMER		(0x0 << 0)
+
+#endif /* _LPC32XX_TIMER_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/uart.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/uart.h
new file mode 100644
index 000000000..8ffd8676f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/uart.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#ifndef _LPC32XX_UART_H
+#define _LPC32XX_UART_H
+
+#include <asm/types.h>
+
+/* 14-clock UART Registers */
+struct hsuart_regs {
+	union {
+		u32 rx;		/* Receiver FIFO		*/
+		u32 tx;		/* Transmitter FIFO		*/
+	};
+	u32 level;		/* FIFO Level Register		*/
+	u32 iir;		/* Interrupt ID Register	*/
+	u32 ctrl;		/* Control Register		*/
+	u32 rate;		/* Rate Control Register	*/
+};
+
+/* 14-clock UART Receiver FIFO Register bits */
+#define HSUART_RX_BREAK			(1 << 10)
+#define HSUART_RX_ERROR			(1 << 9)
+#define HSUART_RX_EMPTY			(1 << 8)
+#define HSUART_RX_DATA			(0xff << 0)
+
+/* 14-clock UART Level Register bits */
+#define HSUART_LEVEL_TX			(0xff << 8)
+#define HSUART_LEVEL_RX			(0xff << 0)
+
+/* 14-clock UART Interrupt Identification Register bits */
+#define HSUART_IIR_TX_INT_SET		(1 << 6)
+#define HSUART_IIR_RX_OE		(1 << 5)
+#define HSUART_IIR_BRK			(1 << 4)
+#define HSUART_IIR_FE			(1 << 3)
+#define HSUART_IIR_RX_TIMEOUT		(1 << 2)
+#define HSUART_IIR_RX_TRIG		(1 << 1)
+#define HSUART_IIR_TX			(1 << 0)
+
+/* 14-clock UART Control Register bits */
+#define HSUART_CTRL_HRTS_INV		(1 << 21)
+#define HSUART_CTRL_HRTS_TRIG_48	(0x3 << 19)
+#define HSUART_CTRL_HRTS_TRIG_32	(0x2 << 19)
+#define HSUART_CTRL_HRTS_TRIG_16	(0x1 << 19)
+#define HSUART_CTRL_HRTS_TRIG_8		(0x0 << 19)
+#define HSUART_CTRL_HRTS_EN		(1 << 18)
+#define HSUART_CTRL_TMO_16		(0x3 << 16)
+#define HSUART_CTRL_TMO_8		(0x2 << 16)
+#define HSUART_CTRL_TMO_4		(0x1 << 16)
+#define HSUART_CTRL_TMO_DISABLED	(0x0 << 16)
+#define HSUART_CTRL_HCTS_INV		(1 << 15)
+#define HSUART_CTRL_HCTS_EN		(1 << 14)
+#define HSUART_CTRL_HSU_OFFSET(n)	((n) << 9)
+#define HSUART_CTRL_HSU_BREAK		(1 << 8)
+#define HSUART_CTRL_HSU_ERR_INT_EN	(1 << 7)
+#define HSUART_CTRL_HSU_RX_INT_EN	(1 << 6)
+#define HSUART_CTRL_HSU_TX_INT_EN	(1 << 5)
+#define HSUART_CTRL_HSU_RX_TRIG_48	(0x5 << 2)
+#define HSUART_CTRL_HSU_RX_TRIG_32	(0x4 << 2)
+#define HSUART_CTRL_HSU_RX_TRIG_16	(0x3 << 2)
+#define HSUART_CTRL_HSU_RX_TRIG_8	(0x2 << 2)
+#define HSUART_CTRL_HSU_RX_TRIG_4	(0x1 << 2)
+#define HSUART_CTRL_HSU_RX_TRIG_1	(0x0 << 2)
+#define HSUART_CTRL_HSU_TX_TRIG_16	(0x3 << 0)
+#define HSUART_CTRL_HSU_TX_TRIG_8	(0x2 << 0)
+#define HSUART_CTRL_HSU_TX_TRIG_4	(0x1 << 0)
+#define HSUART_CTRL_HSU_TX_TRIG_0	(0x0 << 0)
+
+/* UART Control Registers */
+struct uart_ctrl_regs {
+	u32 ctrl;		/* Control Register		*/
+	u32 clkmode;		/* Clock Mode Register		*/
+	u32 loop;		/* Loopback Control Register	*/
+};
+
+/* UART Control Register bits */
+#define UART_CTRL_UART3_MD_CTRL		(1 << 11)
+#define UART_CTRL_HDPX_INV		(1 << 10)
+#define UART_CTRL_HDPX_EN		(1 << 9)
+#define UART_CTRL_UART6_IRDA		(1 << 5)
+#define UART_CTRL_IR_TX6_INV		(1 << 4)
+#define UART_CTRL_IR_RX6_INV		(1 << 3)
+#define UART_CTRL_IR_RX_LENGTH		(1 << 2)
+#define UART_CTRL_IR_TX_LENGTH		(1 << 1)
+#define UART_CTRL_UART5_USB_MODE	(1 << 0)
+
+/* UART Clock Mode Register bits */
+#define UART_CLKMODE_STATX(n)		(1 << ((n) + 16))
+#define UART_CLKMODE_STAT		(1 << 14)
+#define UART_CLKMODE_MASK(n)		(0x3 << (2 * (n) - 2))
+#define UART_CLKMODE_AUTO(n)		(0x2 << (2 * (n) - 2))
+#define UART_CLKMODE_ON(n)		(0x1 << (2 * (n) - 2))
+#define UART_CLKMODE_OFF(n)		(0x0 << (2 * (n) - 2))
+
+/* UART Loopback Control Register bits */
+#define UART_LOOPBACK(n)		(1 << ((n) - 1))
+
+#endif /* _LPC32XX_UART_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/wdt.h b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/wdt.h
new file mode 100644
index 000000000..dd0fc1682
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-lpc32xx/wdt.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#ifndef _LPC32XX_WDT_H
+#define _LPC32XX_WDT_H
+
+#include <asm/types.h>
+
+/* Watchdog Timer Registers */
+struct wdt_regs {
+	u32 isr;		/* Interrupt Status Register		*/
+	u32 ctrl;		/* Control Register			*/
+	u32 counter;		/* Counter Value Register		*/
+	u32 mctrl;		/* Match Control Register		*/
+	u32 match0;		/* Match 0 Register			*/
+	u32 emr;		/* External Match Control Register	*/
+	u32 pulse;		/* Reset Pulse Length Register		*/
+	u32 res;		/* Reset Source Register		*/
+};
+
+/* Watchdog Timer Control Register bits */
+#define WDTIM_CTRL_PAUSE_EN		(1 << 2)
+#define WDTIM_CTRL_RESET_COUNT		(1 << 1)
+#define WDTIM_CTRL_COUNT_ENAB		(1 << 0)
+
+/* Watchdog Timer Match Control Register bits */
+#define WDTIM_MCTRL_RESFRC2		(1 << 6)
+#define WDTIM_MCTRL_RESFRC1		(1 << 5)
+#define WDTIM_MCTRL_M_RES2		(1 << 4)
+#define WDTIM_MCTRL_M_RES1		(1 << 3)
+#define WDTIM_MCTRL_STOP_COUNT0		(1 << 2)
+#define WDTIM_MCTRL_RESET_COUNT0	(1 << 1)
+#define WDTIM_MCTRL_MR0_INT		(1 << 0)
+
+#endif /* _LPC32XX_WDT_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/clock.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/clock.h
new file mode 100644
index 000000000..01978c08f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/clock.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef __ASM_ARCH_LS102XA_CLOCK_H_
+#define __ASM_ARCH_LS102XA_CLOCK_H_
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_UART_CLK,
+	MXC_I2C_CLK,
+	MXC_DSPI_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+ulong get_ddr_freq(ulong);
+uint get_svr(void);
+
+#endif /* __ASM_ARCH_LS102XA_CLOCK_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/config.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/config.h
new file mode 100644
index 000000000..3884948a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/config.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014, Freescale Semiconductor
+ */
+
+#ifndef _ASM_ARMV7_LS102XA_CONFIG_
+#define _ASM_ARMV7_LS102XA_CONFIG_
+
+#define OCRAM_BASE_ADDR				0x10000000
+#define OCRAM_SIZE				0x00010000
+#define OCRAM_BASE_S_ADDR			0x10010000
+#define OCRAM_S_SIZE				0x00010000
+
+#define CONFIG_SYS_IMMR				0x01000000
+#define CONFIG_SYS_DCSRBAR			0x20000000
+
+#define CONFIG_SYS_DCSR_DCFG_ADDR	(CONFIG_SYS_DCSRBAR + 0x00220000)
+#define SYS_FSL_DCSR_RCPM_ADDR	(CONFIG_SYS_DCSRBAR + 0x00222000)
+
+#define SYS_FSL_GIC_ADDR			(CONFIG_SYS_IMMR + 0x00400000)
+#define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_FSL_CSU_ADDR                 (CONFIG_SYS_IMMR + 0x00510000)
+#define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x00530000)
+#define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x00560000)
+#define CONFIG_SYS_FSL_SCFG_ADDR		(CONFIG_SYS_IMMR + 0x00570000)
+#define CONFIG_SYS_FSL_SEC_ADDR			(CONFIG_SYS_IMMR + 0x700000)
+#define CONFIG_SYS_FSL_JR0_ADDR			(CONFIG_SYS_IMMR + 0x710000)
+#define CONFIG_SYS_SEC_MON_ADDR			(CONFIG_SYS_IMMR + 0x00e90000)
+#define CONFIG_SYS_SFP_ADDR			(CONFIG_SYS_IMMR + 0x00e80200)
+#define CONFIG_SYS_FSL_SERDES_ADDR		(CONFIG_SYS_IMMR + 0x00ea0000)
+#define CONFIG_SYS_FSL_GUTS_ADDR		(CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_LS1_CLK_ADDR		(CONFIG_SYS_IMMR + 0x00ee1000)
+#define CONFIG_SYS_FSL_RCPM_ADDR		(CONFIG_SYS_IMMR + 0x00ee2000)
+#define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011c0500)
+#define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011d0500)
+#define CONFIG_SYS_DCU_ADDR			(CONFIG_SYS_IMMR + 0x01ce0000)
+#define CONFIG_SYS_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_EHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x07600000)
+
+#define CONFIG_SYS_FSL_SEC_OFFSET		0x00700000
+#define CONFIG_SYS_FSL_JR0_OFFSET		0x00710000
+#define CONFIG_SYS_TSEC1_OFFSET			0x01d10000
+#define CONFIG_SYS_TSEC2_OFFSET			0x01d50000
+#define CONFIG_SYS_TSEC3_OFFSET			0x01d90000
+#define CONFIG_SYS_MDIO1_OFFSET			0x01d24000
+
+#define TSEC_BASE_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
+#define SCTR_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01b00000)
+
+#define I2C1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01180000)
+#define I2C2_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01190000)
+#define I2C3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x011a0000)
+
+#define WDOG1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01ad0000)
+
+#define QSPI0_BASE_ADDR				(CONFIG_SYS_IMMR + 0x00550000)
+#define DSPI1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01100000)
+
+#define LPUART_BASE				(CONFIG_SYS_IMMR + 0x01950000)
+
+#define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
+#define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
+
+#define CONFIG_SYS_PCIE1_PHYS_BASE		0x4000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_BASE		0x4800000000ULL
+#define CONFIG_SYS_PCIE1_VIRT_ADDR		0x24000000UL
+#define CONFIG_SYS_PCIE2_VIRT_ADDR		0x34000000UL
+#define CONFIG_SYS_PCIE_MMAP_SIZE		(192 * 1024 * 1024) /* 192M */
+/*
+ * TLB will map VIRT_ADDR to (PHYS_BASE + VIRT_ADDR)
+ * So 40bit PCIe PHY addr can directly be converted to a 32bit virtual addr.
+ */
+#define CONFIG_SYS_PCIE1_PHYS_ADDR		(CONFIG_SYS_PCIE1_PHYS_BASE + \
+						 CONFIG_SYS_PCIE1_VIRT_ADDR)
+#define CONFIG_SYS_PCIE2_PHYS_ADDR		(CONFIG_SYS_PCIE2_PHYS_BASE + \
+						 CONFIG_SYS_PCIE2_VIRT_ADDR)
+
+/* SATA */
+#define AHCI_BASE_ADDR				(CONFIG_SYS_IMMR + 0x02200000)
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#ifdef CONFIG_DDR_SPD
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED			CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
+#endif
+
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_ESDHC_BE
+#define CONFIG_SYS_FSL_WDOG_BE
+#define CONFIG_SYS_FSL_DSPI_BE
+#define CONFIG_SYS_FSL_DCU_BE
+#define CONFIG_SYS_FSL_SEC_MON_LE
+#define CONFIG_SYS_FSL_SFP_VER_3_2
+#define CONFIG_SYS_FSL_SFP_BE
+#define CONFIG_SYS_FSL_SRK_LE
+
+#define DCU_LAYER_MAX_NUM			16
+
+#ifdef CONFIG_ARCH_LS1021A
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+#else
+#error SoC not defined
+#endif
+
+#define FSL_IFC_COMPAT		"fsl,ifc"
+#define FSL_QSPI_COMPAT		"fsl,ls1021a-qspi"
+#define FSL_DSPI_COMPAT		"fsl,ls1021a-v1.0-dspi"
+
+#endif /* _ASM_ARMV7_LS102XA_CONFIG_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
new file mode 100644
index 000000000..d99a6f318
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_SERDES_H
+#define __FSL_SERDES_H
+
+#include <config.h>
+
+enum srds_prtcl {
+	/*
+	 * Nobody will check whether the device 'NONE' has been configured,
+	 * So use it to indicate if the serdes_prtcl_map has been initialized.
+	 */
+	NONE = 0,
+	PCIE1,
+	PCIE2,
+	SATA1,
+	SGMII_TSEC1,
+	SGMII_TSEC2,
+};
+
+enum srds {
+	FSL_SRDS_1  = 0,
+	FSL_SRDS_2  = 1,
+};
+
+int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
+const char *serdes_clock_to_string(u32 clock);
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+
+#endif /* __FSL_SERDES_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/gpio.h
new file mode 100644
index 000000000..517652b5d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/gpio.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+/*
+ * Dummy header file to enable CONFIG_OF_CONTROL.
+ * If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled.
+ * It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable
+ * OF_CONTROL must have arch/gpio.h.
+ */
+
+#ifndef __ASM_ARCH_LS102XA_GPIO_H_
+#define __ASM_ARCH_LS102XA_GPIO_H_
+
+struct ccsr_gpio {
+	u32	gpdir;
+	u32	gpodr;
+	u32	gpdat;
+	u32	gpier;
+	u32	gpimr;
+	u32	gpicr;
+	u32	gpibe;
+};
+
+struct mpc8xxx_gpio_plat {
+	ulong addr;
+	ulong size;
+	uint ngpios;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
new file mode 100644
index 000000000..f2ba18234
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -0,0 +1,432 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_LS102XA_IMMAP_H_
+#define __ASM_ARCH_LS102XA_IMMAP_H_
+#include <fsl_immap.h>
+
+#define SVR_MAJ(svr)		(((svr) >>  4) & 0xf)
+#define SVR_MIN(svr)		(((svr) >>  0) & 0xf)
+#define SVR_SOC_VER(svr)	(((svr) >> 8) & 0x7ff)
+#define IS_E_PROCESSOR(svr)	(svr & 0x80000)
+#define IS_SVR_REV(svr, maj, min) \
+		((SVR_MAJ(svr) == maj) && (SVR_MIN(svr) == min))
+
+#define SOC_VER_SLS1020		0x00
+#define SOC_VER_LS1020		0x10
+#define SOC_VER_LS1021		0x11
+#define SOC_VER_LS1022		0x12
+
+#define SOC_MAJOR_VER_1_0	0x1
+#define SOC_MAJOR_VER_2_0	0x2
+
+#define CCSR_BRR_OFFSET		0xe4
+#define CCSR_SCRATCHRW1_OFFSET	0x200
+
+#define RCWSR0_SYS_PLL_RAT_SHIFT	25
+#define RCWSR0_SYS_PLL_RAT_MASK		0x1f
+#define RCWSR0_MEM_PLL_RAT_SHIFT	16
+#define RCWSR0_MEM_PLL_RAT_MASK		0x3f
+
+#define RCWSR4_SRDS1_PRTCL_SHIFT	24
+#define RCWSR4_SRDS1_PRTCL_MASK		0xff000000
+
+#define TIMER_COMP_VAL			0xffffffffffffffffull
+#define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
+#define SYS_COUNTER_CTRL_ENABLE		(1 << 24)
+
+#define DCFG_CCSR_PORSR1_RCW_MASK	0xff800000
+#define DCFG_CCSR_PORSR1_RCW_SRC_I2C	0x24800000
+
+#define DCFG_DCSR_PORCR1		0
+
+/*
+ * Define default values for some CCSR macros to make header files cleaner
+ *
+ * To completely disable CCSR relocation in a board header file, define
+ * CONFIG_SYS_CCSR_DO_NOT_RELOCATE.  This will force CONFIG_SYS_CCSRBAR_PHYS
+ * to a value that is the same as CONFIG_SYS_CCSRBAR.
+ */
+
+#ifdef CONFIG_SYS_CCSRBAR_PHYS
+#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly."
+#endif
+
+#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#undef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR		CONFIG_SYS_IMMR
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0xf
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0
+#endif
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_IMMR
+#endif
+
+#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \
+				 CONFIG_SYS_CCSRBAR_PHYS_LOW)
+
+struct sys_info {
+	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	unsigned long freq_systembus;
+	unsigned long freq_ddrbus;
+	unsigned long freq_localbus;
+};
+
+#define CCSR_DEVDISR1_QE	0x00000001
+
+/* Device Configuration and Pin Control */
+struct ccsr_gur {
+	u32     porsr1;         /* POR status 1 */
+	u32     porsr2;         /* POR status 2 */
+	u8      res_008[0x20-0x8];
+	u32     gpporcr1;       /* General-purpose POR configuration */
+	u32	gpporcr2;
+	u32     dcfg_fusesr;    /* Fuse status register */
+	u8      res_02c[0x70-0x2c];
+	u32     devdisr;        /* Device disable control */
+	u32     devdisr2;       /* Device disable control 2 */
+	u32     devdisr3;       /* Device disable control 3 */
+	u32     devdisr4;       /* Device disable control 4 */
+	u32     devdisr5;       /* Device disable control 5 */
+	u8      res_084[0x94-0x84];
+	u32     coredisru;      /* uppper portion for support of 64 cores */
+	u32     coredisrl;      /* lower portion for support of 64 cores */
+	u8      res_09c[0xa4-0x9c];
+	u32     svr;            /* System version */
+	u8	res_0a8[0xb0-0xa8];
+	u32	rstcr;		/* Reset control */
+	u32	rstrqpblsr;	/* Reset request preboot loader status */
+	u8	res_0b8[0xc0-0xb8];
+	u32	rstrqmr1;	/* Reset request mask */
+	u8	res_0c4[0xc8-0xc4];
+	u32	rstrqsr1;	/* Reset request status */
+	u8	res_0cc[0xd4-0xcc];
+	u32	rstrqwdtmrl;	/* Reset request WDT mask */
+	u8	res_0d8[0xdc-0xd8];
+	u32	rstrqwdtsrl;	/* Reset request WDT status */
+	u8	res_0e0[0xe4-0xe0];
+	u32	brrl;		/* Boot release */
+	u8      res_0e8[0x100-0xe8];
+	u32     rcwsr[16];      /* Reset control word status */
+#define RCW_SB_EN_REG_INDEX	7
+#define RCW_SB_EN_MASK		0x00200000
+	u8      res_140[0x200-0x140];
+	u32     scratchrw[4];  /* Scratch Read/Write */
+	u8      res_210[0x300-0x210];
+	u32     scratchw1r[4];  /* Scratch Read (Write once) */
+	u8      res_310[0x400-0x310];
+	u32	crstsr;
+	u8      res_404[0x550-0x404];
+	u32	sataliodnr;
+	u8	res_554[0x604-0x554];
+	u32	pamubypenr;
+	u32	dmacr1;
+	u8      res_60c[0x740-0x60c];   /* add more registers when needed */
+	u32     tp_ityp[64];    /* Topology Initiator Type Register */
+	struct {
+		u32     upper;
+		u32     lower;
+	} tp_cluster[1];        /* Core Cluster n Topology Register */
+	u8	res_848[0xe60-0x848];
+	u32	ddrclkdr;
+	u8	res_e60[0xe68-0xe64];
+	u32	ifcclkdr;
+	u8	res_e68[0xe80-0xe6c];
+	u32	sdhcpcr;
+};
+
+#define SCFG_ETSECDMAMCR_LE_BD_FR	0x00000c00
+#define SCFG_SNPCNFGCR_SEC_RD_WR	0xc0000000
+#define SCFG_ETSECCMCR_GE2_CLK125	0x04000000
+#define SCFG_ETSECCMCR_GE0_CLK125	0x00000000
+#define SCFG_ETSECCMCR_GE1_CLK125	0x08000000
+#define SCFG_PIXCLKCR_PXCKEN		0x80000000
+#define SCFG_QSPI_CLKSEL		0x50100000
+#define SCFG_SNPCNFGCR_SEC_RD_WR	0xc0000000
+#define SCFG_SNPCNFGCR_DCU_RD_WR	0x03000000
+#define SCFG_SNPCNFGCR_SATA_RD_WR	0x00c00000
+#define SCFG_SNPCNFGCR_USB3_RD_WR	0x00300000
+#define SCFG_SNPCNFGCR_DBG_RD_WR	0x000c0000
+#define SCFG_SNPCNFGCR_EDMA_SNP		0x00020000
+#define SCFG_ENDIANCR_LE		0x80000000
+#define SCFG_DPSLPCR_WDRR_EN		0x00000001
+#define SCFG_PMCINTECR_LPUART		0x40000000
+#define SCFG_PMCINTECR_FTM		0x20000000
+#define SCFG_PMCINTECR_GPIO		0x10000000
+#define SCFG_PMCINTECR_IRQ0		0x08000000
+#define SCFG_PMCINTECR_IRQ1		0x04000000
+#define SCFG_PMCINTECR_ETSECRXG0	0x00800000
+#define SCFG_PMCINTECR_ETSECRXG1	0x00400000
+#define SCFG_PMCINTECR_ETSECERRG0	0x00080000
+#define SCFG_PMCINTECR_ETSECERRG1	0x00040000
+#define SCFG_CLUSTERPMCR_WFIL2EN	0x80000000
+
+#define SCFG_BASE			0x01570000
+#define SCFG_USB3PRM1CR			0x070
+#define SCFG_USB_TXVREFTUNE		0x9
+#define SCFG_USB_SQRXTUNE_MASK		0x7
+#define SCFG_USB3PRM2CR			0x074
+#define SCFG_USB_PCSTXSWINGFULL_MASK	0x0000FE00
+#define SCFG_USB_PCSTXSWINGFULL_VAL		0x00008E00
+
+#define USB_PHY_BASE			0x08510000
+#define USB_PHY_RX_OVRD_IN_HI	0x200c
+#define USB_PHY_RX_EQ_VAL_1		0x0000
+#define USB_PHY_RX_EQ_VAL_2		0x8000
+#define USB_PHY_RX_EQ_VAL_3		0x8004
+#define USB_PHY_RX_EQ_VAL_4		0x800C
+
+/* Supplemental Configuration Unit */
+struct ccsr_scfg {
+	u32 dpslpcr;
+	u32 resv0[2];
+	u32 etsecclkdpslpcr;
+	u32 resv1[5];
+	u32 fuseovrdcr;
+	u32 pixclkcr;
+	u32 resv2[5];
+	u32 spimsicr;
+	u32 resv3[6];
+	u32 pex1pmwrcr;
+	u32 pex1pmrdsr;
+	u32 resv4[3];
+	u32 usb3prm1cr;
+	u32 usb4prm2cr;
+	u32 pex1rdmsgpldlsbsr;
+	u32 pex1rdmsgpldmsbsr;
+	u32 pex2rdmsgpldlsbsr;
+	u32 pex2rdmsgpldmsbsr;
+	u32 pex1rdmmsgrqsr;
+	u32 pex2rdmmsgrqsr;
+	u32 spimsiclrcr;
+	u32 pexmscportsr[2];
+	u32 pex2pmwrcr;
+	u32 resv5[24];
+	u32 mac1_streamid;
+	u32 mac2_streamid;
+	u32 mac3_streamid;
+	u32 pex1_streamid;
+	u32 pex2_streamid;
+	u32 dma_streamid;
+	u32 sata_streamid;
+	u32 usb3_streamid;
+	u32 qe_streamid;
+	u32 sdhc_streamid;
+	u32 adma_streamid;
+	u32 letechsftrstcr;
+	u32 core0_sft_rst;
+	u32 core1_sft_rst;
+	u32 resv6[1];
+	u32 usb_hi_addr;
+	u32 etsecclkadjcr;
+	u32 sai_clk;
+	u32 resv7[1];
+	u32 dcu_streamid;
+	u32 usb2_streamid;
+	u32 ftm_reset;
+	u32 altcbar;
+	u32 qspi_cfg;
+	u32 pmcintecr;
+	u32 pmcintlecr;
+	u32 pmcintsr;
+	u32 qos1;
+	u32 qos2;
+	u32 qos3;
+	u32 cci_cfg;
+	u32 endiancr;
+	u32 etsecdmamcr;
+	u32 usb3prm3cr;
+	u32 resv9[1];
+	u32 debug_streamid;
+	u32 resv10[5];
+	u32 snpcnfgcr;
+	u32 hrstcr;
+	u32 intpcr;
+	u32 resv12[20];
+	u32 scfgrevcr;
+	u32 coresrencr;
+	u32 pex2pmrdsr;
+	u32 eddrtqcfg;
+	u32 ddrc2cr;
+	u32 ddrc3cr;
+	u32 ddrc4cr;
+	u32 ddrgcr;
+	u32 resv13[120];
+	u32 qeioclkcr;
+	u32 etsecmcr;
+	u32 sdhciovserlcr;
+	u32 resv14[61];
+	u32 sparecr[8];
+	u32 resv15[248];
+	u32 core0sftrstsr;
+	u32 clusterpmcr;
+};
+
+/* Clocking */
+struct ccsr_clk {
+	struct {
+		u32 clkcncsr;	/* core cluster n clock control status */
+		u8  res_004[0x1c];
+	} clkcsr[2];
+	u8	res_040[0x7c0]; /* 0x100 */
+	struct {
+		u32 pllcngsr;
+		u8 res_804[0x1c];
+	} pllcgsr[2];
+	u8	res_840[0x1c0];
+	u32	clkpcsr;	/* 0xa00 Platform clock domain control/status */
+	u8	res_a04[0x1fc];
+	u32	pllpgsr;	/* 0xc00 Platform PLL General Status */
+	u8	res_c04[0x1c];
+	u32	plldgsr;	/* 0xc20 DDR PLL General Status */
+	u8	res_c24[0x3dc];
+};
+
+/* System Counter */
+struct sctr_regs {
+	u32 cntcr;
+	u32 cntsr;
+	u32 cntcv1;
+	u32 cntcv2;
+	u32 resv1[4];
+	u32 cntfid0;
+	u32 cntfid1;
+	u32 resv2[1002];
+	u32 counterid[12];
+};
+
+#define MAX_SERDES			1
+#define SRDS_MAX_LANES			4
+#define SRDS_MAX_BANK			2
+
+#define SRDS_RSTCTL_RST			0x80000000
+#define SRDS_RSTCTL_RSTDONE		0x40000000
+#define SRDS_RSTCTL_RSTERR		0x20000000
+#define SRDS_RSTCTL_SWRST		0x10000000
+#define SRDS_RSTCTL_SDEN		0x00000020
+#define SRDS_RSTCTL_SDRST_B		0x00000040
+#define SRDS_RSTCTL_PLLRST_B		0x00000080
+#define SRDS_PLLCR0_POFF		0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK	0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100	0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125	0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25	0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150	0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13	0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88	0x50000000
+#define SRDS_PLLCR0_PLL_LCK		0x00800000
+#define SRDS_PLLCR0_FRATE_SEL_MASK	0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5		0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75	0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15	0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4		0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12	0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3		0x000a0000
+#define SRDS_PLLCR1_PLL_BWSEL		0x08000000
+
+struct ccsr_serdes {
+	struct {
+		u32	rstctl;	/* Reset Control Register */
+
+		u32	pllcr0; /* PLL Control Register 0 */
+
+		u32	pllcr1; /* PLL Control Register 1 */
+		u32	res_0c;	/* 0x00c */
+		u32	pllcr3;
+		u32	pllcr4;
+		u8	res_18[0x20-0x18];
+	} bank[2];
+	u8	res_40[0x90-0x40];
+	u32	srdstcalcr;	/* 0x90 TX Calibration Control */
+	u8	res_94[0xa0-0x94];
+	u32	srdsrcalcr;	/* 0xa0 RX Calibration Control */
+	u8	res_a4[0xb0-0xa4];
+	u32	srdsgr0;	/* 0xb0 General Register 0 */
+	u8	res_b4[0xe0-0xb4];
+	u32	srdspccr0;	/* 0xe0 Protocol Converter Config 0 */
+	u32	srdspccr1;	/* 0xe4 Protocol Converter Config 1 */
+	u32	srdspccr2;	/* 0xe8 Protocol Converter Config 2 */
+	u32	srdspccr3;	/* 0xec Protocol Converter Config 3 */
+	u32	srdspccr4;	/* 0xf0 Protocol Converter Config 4 */
+	u8	res_f4[0x100-0xf4];
+	struct {
+		u32	lnpssr;	/* 0x100, 0x120, ..., 0x1e0 */
+		u8	res_104[0x120-0x104];
+	} srdslnpssr[4];
+	u8	res_180[0x300-0x180];
+	u32	srdspexeqcr;
+	u32	srdspexeqpcr[11];
+	u8	res_330[0x400-0x330];
+	u32	srdspexapcr;
+	u8	res_404[0x440-0x404];
+	u32	srdspexbpcr;
+	u8	res_444[0x800-0x444];
+	struct {
+		u32	gcr0;	/* 0x800 General Control Register 0 */
+		u32	gcr1;	/* 0x804 General Control Register 1 */
+		u32	gcr2;	/* 0x808 General Control Register 2 */
+		u32	sscr0;
+		u32	recr0;	/* 0x810 Receive Equalization Control */
+		u32	recr1;
+		u32	tecr0;	/* 0x818 Transmit Equalization Control */
+		u32	sscr1;
+		u32	ttlcr0;	/* 0x820 Transition Tracking Loop Ctrl 0 */
+		u8	res_824[0x83c-0x824];
+		u32	tcsr3;
+	} lane[4];	/* Lane A, B, C, D, E, F, G, H */
+	u8	res_a00[0x1000-0xa00];	/* from 0xa00 to 0xfff */
+};
+
+#define RCPM_POWMGTCSR			0x130
+#define RCPM_POWMGTCSR_SERDES_PW	0x80000000
+#define RCPM_POWMGTCSR_LPM20_REQ	0x00100000
+#define RCPM_POWMGTCSR_LPM20_ST		0x00000200
+#define RCPM_POWMGTCSR_P_LPM20_ST	0x00000100
+#define RCPM_IPPDEXPCR0			0x140
+#define RCPM_IPPDEXPCR0_ETSEC		0x80000000
+#define RCPM_IPPDEXPCR0_GPIO		0x00000040
+#define RCPM_IPPDEXPCR1			0x144
+#define RCPM_IPPDEXPCR1_LPUART		0x40000000
+#define RCPM_IPPDEXPCR1_FLEXTIMER	0x20000000
+#define RCPM_IPPDEXPCR1_OCRAM1		0x10000000
+#define RCPM_NFIQOUTR			0x15c
+#define RCPM_NIRQOUTR			0x16c
+#define RCPM_DSIMSKR			0x18c
+#define RCPM_CLPCL10SETR		0x1c4
+#define RCPM_CLPCL10SETR_C0		0x00000001
+
+struct ccsr_rcpm {
+	u8 rev1[0x4c];
+	u32 twaitsr;
+	u8 rev2[0xe0];
+	u32 powmgtcsr;
+	u8 rev3[0xc];
+	u32 ippdexpcr0;
+	u32 ippdexpcr1;
+	u8 rev4[0x14];
+	u32 nfiqoutr;
+	u8 rev5[0xc];
+	u32 nirqoutr;
+	u8 rev6[0x1c];
+	u32 dsimskr;
+	u8 rev7[0x34];
+	u32 clpcl10setr;
+};
+
+uint get_svr(void);
+
+#endif	/* __ASM_ARCH_LS102XA_IMMAP_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/imx-regs.h
new file mode 100644
index 000000000..64853d897
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/imx-regs.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define I2C_QUIRK_REG	/* enable 8-bit driver */
+
+#endif /* __ASM_ARCH_IMX_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_devdis.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_devdis.h
new file mode 100644
index 000000000..5d6a4e76b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_devdis.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_LS102XA_DEVDIS_H_
+#define __FSL_LS102XA_DEVDIS_H_
+
+#include <fsl_devdis.h>
+
+const struct devdis_table devdis_tbl[] = {
+	{ "pbl", 0x0, 0x80000000 },	/* PBL	*/
+	{ "esdhc", 0x0, 0x20000000 },	/* eSDHC	*/
+	{ "qdma", 0x0, 0x800000 },	/* qDMA		*/
+	{ "edma", 0x0, 0x400000 },	/* eDMA		*/
+	{ "usb3", 0x0, 0x84000 },	/* USB3.0 controller and PHY*/
+	{ "usb2", 0x0, 0x40000 },	/* USB2.0 controller	*/
+	{ "sata", 0x0, 0x8000 },	/* SATA		*/
+	{ "sec", 0x0, 0x200 },		/* SEC		*/
+	{ "dcu", 0x0, 0x2 },		/* Display controller Unit	*/
+	{ "qe", 0x0, 0x1 },		/* QUICC Engine	*/
+	{ "etsec1", 0x1, 0x80000000 },	/* eTSEC1 controller	*/
+	{ "etesc2", 0x1, 0x40000000 },	/* eTSEC2 controller	*/
+	{ "etsec3", 0x1, 0x20000000 },	/* eTSEC3 controller	*/
+	{ "pex1", 0x2, 0x80000000 },	/* PCIE controller 1	*/
+	{ "pex2", 0x2, 0x40000000 },	/* PCIE controller 2	*/
+	{ "duart1", 0x3, 0x20000000 },	/* DUART1	*/
+	{ "duart2", 0x3, 0x10000000 },	/* DUART2	*/
+	{ "qspi", 0x3, 0x8000000 },	/* QSPI		*/
+	{ "ddr", 0x4, 0x80000000 },	/* DDR		*/
+	{ "ocram1", 0x4, 0x8000000 },	/* OCRAM1	*/
+	{ "ifc", 0x4, 0x800000 },	/* IFC		*/
+	{ "gpio", 0x4, 0x400000 },	/* GPIO		*/
+	{ "dbg", 0x4, 0x200000 },	/* DBG		*/
+	{ "can1", 0x4, 0x80000 },	/* FlexCAN1	*/
+	{ "can2_4", 0x4, 0x40000 },	/* FlexCAN2_3_4	*/
+	{ "ftm2_8", 0x4, 0x20000 },	/* FlexTimer2_3_4_5_6_7_8	*/
+	{ "secmon", 0x4, 0x4000 },	/* Security Monitor	*/
+	{ "wdog1_2", 0x4, 0x400 },	/* WatchDog1_2	*/
+	{ "i2c2_3", 0x4, 0x200 },	/* I2C2_3	*/
+	{ "sai1_4", 0x4, 0x100 },	/* SAI1_2_3_4	*/
+	{ "lpuart2_6", 0x4, 0x80 },	/* LPUART2_3_4_5_6	*/
+	{ "dspi1_2", 0x4, 0x40 },	/* DSPI1_2	*/
+	{ "asrc", 0x4, 0x20 },		/* ASRC		*/
+	{ "spdif", 0x4, 0x10 },		/* SPDIF	*/
+	{ "i2c1", 0x4, 0x4 },		/* I2C1		*/
+	{ "lpuart1", 0x4, 0x2 },	/* LPUART1	*/
+	{ "ftm1", 0x4, 0x1 },		/* FlexTimer1	*/
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
new file mode 100644
index 000000000..1fde8bce5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_LS102XA_SOC_H
+#define __FSL_LS102XA_SOC_H
+
+unsigned int get_soc_major_rev(void);
+int arch_soc_init(void);
+int ls102xa_smmu_stream_id_init(void);
+
+void erratum_a008850_post(void);
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+void erratum_a010315(void);
+#endif
+
+#endif /* __FSL_LS102XA_SOC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
new file mode 100644
index 000000000..93b0a2609
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_LS102XA_STREAM_ID_H_
+#define __FSL_LS102XA_STREAM_ID_H_
+
+#include <fsl_sec.h>
+
+#define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \
+	{ .compat = name, \
+	  .id = { idA }, .num_ids = 1, \
+	  .reg_offset = off + CONFIG_SYS_IMMR, \
+	  .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
+	}
+
+#define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \
+	{ .compat = name, \
+	  .id = { idA, idB }, .num_ids = 2, \
+	  .reg_offset = off + CONFIG_SYS_IMMR, \
+	  .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
+	}
+
+/*
+ * handle both old and new versioned SEC properties:
+ * "fsl,secX.Y" became "fsl,sec-vX.Y" during development
+ */
+#define SET_SEC_JR_LIODN_ENTRY(jrnum, liodnA, liodnB) \
+	SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB, \
+		offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \
+		CONFIG_SYS_FSL_SEC_OFFSET, \
+		CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum), \
+	SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\
+		offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \
+		CONFIG_SYS_FSL_SEC_OFFSET, \
+		CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum)
+
+/* This is a bit evil since we treat rtic param as both a string & hex value */
+#define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \
+	SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \
+		liodnA,	\
+		offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
+		CONFIG_SYS_FSL_SEC_OFFSET, \
+		CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \
+	SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \
+		liodnA,	\
+		offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
+		CONFIG_SYS_FSL_SEC_OFFSET, \
+		CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa))
+
+#define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \
+	SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \
+		offsetof(ccsr_sec_t, decoliodnr[num].ls) + \
+		CONFIG_SYS_FSL_SEC_OFFSET, 0)
+
+struct liodn_id_table {
+	const char *compat;
+	u32 id[2];
+	u8 num_ids;
+	phys_addr_t compat_offset;
+	unsigned long reg_offset;
+};
+
+struct smmu_stream_id {
+	uint16_t offset;
+	uint16_t stream_id;
+	char dev_name[32];
+};
+
+void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size);
+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h
new file mode 100644
index 000000000..b6daf32e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_NS_ACCESS_H_
+#define __FSL_NS_ACCESS_H_
+
+enum csu_cslx_ind {
+	CSU_CSLX_PCIE2_IO = 0,
+	CSU_CSLX_PCIE1_IO,
+	CSU_CSLX_MG2TPR_IP,
+	CSU_CSLX_IFC_MEM,
+	CSU_CSLX_OCRAM,
+	CSU_CSLX_GIC,
+	CSU_CSLX_PCIE1,
+	CSU_CSLX_OCRAM2,
+	CSU_CSLX_QSPI_MEM,
+	CSU_CSLX_PCIE2,
+	CSU_CSLX_SATA,
+	CSU_CSLX_USB3,
+	CSU_CSLX_SERDES = 32,
+	CSU_CSLX_QDMA,
+	CSU_CSLX_LPUART2,
+	CSU_CSLX_LPUART1,
+	CSU_CSLX_LPUART4,
+	CSU_CSLX_LPUART3,
+	CSU_CSLX_LPUART6,
+	CSU_CSLX_LPUART5,
+	CSU_CSLX_DSPI2 = 40,
+	CSU_CSLX_DSPI1,
+	CSU_CSLX_QSPI,
+	CSU_CSLX_ESDHC,
+	CSU_CSLX_2D_ACE,
+	CSU_CSLX_IFC,
+	CSU_CSLX_I2C1,
+	CSU_CSLX_USB2,
+	CSU_CSLX_I2C3,
+	CSU_CSLX_I2C2,
+	CSU_CSLX_DUART2 = 50,
+	CSU_CSLX_DUART1,
+	CSU_CSLX_WDT2,
+	CSU_CSLX_WDT1,
+	CSU_CSLX_EDMA,
+	CSU_CSLX_SYS_CNT,
+	CSU_CSLX_DMA_MUX2,
+	CSU_CSLX_DMA_MUX1,
+	CSU_CSLX_DDR,
+	CSU_CSLX_QUICC,
+	CSU_CSLX_DCFG_CCU_RCPM = 60,
+	CSU_CSLX_SECURE_BOOTROM,
+	CSU_CSLX_SFP,
+	CSU_CSLX_TMU,
+	CSU_CSLX_SECURE_MONITOR,
+	CSU_CSLX_RESERVED0,
+	CSU_CSLX_ETSEC1,
+	CSU_CSLX_SEC5_5,
+	CSU_CSLX_ETSEC3,
+	CSU_CSLX_ETSEC2,
+	CSU_CSLX_GPIO2 = 70,
+	CSU_CSLX_GPIO1,
+	CSU_CSLX_GPIO4,
+	CSU_CSLX_GPIO3,
+	CSU_CSLX_PLATFORM_CONT,
+	CSU_CSLX_CSU,
+	CSU_CSLX_ASRC,
+	CSU_CSLX_SPDIF,
+	CSU_CSLX_FLEXCAN2,
+	CSU_CSLX_FLEXCAN1,
+	CSU_CSLX_FLEXCAN4 = 80,
+	CSU_CSLX_FLEXCAN3,
+	CSU_CSLX_SAI2,
+	CSU_CSLX_SAI1,
+	CSU_CSLX_SAI4,
+	CSU_CSLX_SAI3,
+	CSU_CSLX_FTM2,
+	CSU_CSLX_FTM1,
+	CSU_CSLX_FTM4,
+	CSU_CSLX_FTM3,
+	CSU_CSLX_FTM6 = 90,
+	CSU_CSLX_FTM5,
+	CSU_CSLX_FTM8,
+	CSU_CSLX_FTM7,
+	CSU_CSLX_EPU,
+	CSU_CSLX_COP_DCSR,
+	CSU_CSLX_DDI,
+	CSU_CSLX_GDI,
+	CSU_CSLX_RESERVED1,
+	CSU_CSLX_USB3_PHY = 116,
+	CSU_CSLX_RESERVED2,
+	CSU_CSLX_MAX,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/soc.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/soc.h
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/soc.h
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/spl.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/spl.h
new file mode 100644
index 000000000..990c74d75
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/spl.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_SPL_H__
+#define __ASM_ARCH_SPL_H__
+
+#define BOOT_DEVICE_NONE	0
+#define BOOT_DEVICE_XIP		1
+#define BOOT_DEVICE_XIPWAIT	2
+#define BOOT_DEVICE_NAND	3
+#define BOOT_DEVICE_ONENAND	4
+#define BOOT_DEVICE_MMC1	5
+#define BOOT_DEVICE_MMC2	6
+#define BOOT_DEVICE_MMC2_2	7
+#define BOOT_DEVICE_SPI		10
+
+#endif	/* __ASM_ARCH_SPL_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-ls102xa/svr.h b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/svr.h
new file mode 100644
index 000000000..52b27e2d6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-ls102xa/svr.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef _ASM_LS102X_SVR_H_
+#define _ASM_LS102X_SVR_H_
+
+#define SVR_LS102XA		0
+#define SVR_VAR_PER_SHIFT	8
+#define SVR_LS102XA_MASK	0x700
+
+#endif /* _ASM_LS102X_SVR_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mediatek/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mediatek/gpio.h
new file mode 100644
index 000000000..4ea102063
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mediatek/gpio.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#ifndef __MEDIATEK_GPIO_H
+#define __MEDIATEK_GPIO_H
+
+#endif	/* __MEDIATEK_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mediatek/misc.h b/roms/u-boot/arch/arm/include/asm/arch-mediatek/misc.h
new file mode 100644
index 000000000..2530e78a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mediatek/misc.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#ifndef __MEDIATEK_MISC_H_
+#define __MEDIATEK_MISC_H_
+
+#define VER_BASE		0x08000000
+#define VER_SIZE		0x10
+
+#define APHW_CODE		0x00
+#define APHW_SUBCODE		0x04
+#define APHW_VER		0x08
+#define APSW_VER		0x0c
+
+#endif /* __MEDIATEK_MISC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mediatek/reset.h b/roms/u-boot/arch/arm/include/asm/arch-mediatek/reset.h
new file mode 100644
index 000000000..4ba0bad94
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mediatek/reset.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#ifndef __MEDIATEK_RESET_H
+#define __MEDIATEK_RESET_H
+
+struct udevice;
+
+int mediatek_reset_bind(struct udevice *pdev, u32 regofs, u32 num_regs);
+
+#endif	/* __MEDIATEK_RESET_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/axg.h b/roms/u-boot/arch/arm/include/asm/arch-meson/axg.h
new file mode 100644
index 000000000..12042de93
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/axg.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __AXG_H__
+#define __AXG_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define AXG_AOBUS_BASE		0xff800000
+#define AXG_PERIPHS_BASE	0xff634400
+#define AXG_HIU_BASE		0xff63c000
+#define AXG_ETH_BASE		0xff3f0000
+
+/* Always-On Peripherals registers */
+#define AXG_AO_ADDR(off)	(AXG_AOBUS_BASE + ((off) << 2))
+
+#define AXG_AO_SEC_GP_CFG0	AXG_AO_ADDR(0x90)
+#define AXG_AO_SEC_GP_CFG3	AXG_AO_ADDR(0x93)
+#define AXG_AO_SEC_GP_CFG4	AXG_AO_ADDR(0x94)
+#define AXG_AO_SEC_GP_CFG5	AXG_AO_ADDR(0x95)
+
+#define AXG_AO_BOOT_DEVICE	0xF
+#define AXG_AO_MEM_SIZE_MASK	0xFFFF0000
+#define AXG_AO_MEM_SIZE_SHIFT	16
+#define AXG_AO_BL31_RSVMEM_SIZE_MASK	0xFFFF0000
+#define AXG_AO_BL31_RSVMEM_SIZE_SHIFT	16
+#define AXG_AO_BL32_RSVMEM_SIZE_MASK	0xFFFF
+
+#endif /* __AXG_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/boot.h b/roms/u-boot/arch/arm/include/asm/arch-meson/boot.h
new file mode 100644
index 000000000..c67d12d06
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/boot.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __MESON_BOOT_H__
+#define __MESON_BOOT_H__
+
+#include <linux/types.h>
+
+/* Boot device */
+#define BOOT_DEVICE_RESERVED    0
+#define BOOT_DEVICE_EMMC        1
+#define BOOT_DEVICE_NAND        2
+#define BOOT_DEVICE_SPI         3
+#define BOOT_DEVICE_SD          4
+#define BOOT_DEVICE_USB         5
+
+int meson_get_boot_device(void);
+
+int meson_get_soc_rev(char *buff, size_t buff_len);
+
+#endif /* __MESON_BOOT_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/clock-axg.h b/roms/u-boot/arch/arm/include/asm/arch-meson/clock-axg.h
new file mode 100644
index 000000000..1ef88e4fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/clock-axg.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - AmLogic, Inc.
+ * Copyright 2018 - Beniamino Galvani <b.galvani@gmail.com>
+ * Copyright 2018 - BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+#ifndef _ARCH_MESON_CLOCK_AXG_H_
+#define _ARCH_MESON_CLOCK_AXG_H_
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet are listed in comment blocks below.
+ * Those offsets must be multiplied by 4 before adding them to the base address
+ * to get the right value
+ */
+#define HHI_GP0_PLL_CNTL		0x40
+#define HHI_GP0_PLL_CNTL2		0x44
+#define HHI_GP0_PLL_CNTL3		0x48
+#define HHI_GP0_PLL_CNTL4		0x4c
+#define HHI_GP0_PLL_CNTL5		0x50
+#define HHI_GP0_PLL_STS			0x54
+#define HHI_GP0_PLL_CNTL1		0x58
+#define HHI_HIFI_PLL_CNTL		0x80
+#define HHI_HIFI_PLL_CNTL2		0x84
+#define HHI_HIFI_PLL_CNTL3		0x88
+#define HHI_HIFI_PLL_CNTL4		0x8C
+#define HHI_HIFI_PLL_CNTL5		0x90
+#define HHI_HIFI_PLL_STS		0x94
+#define HHI_HIFI_PLL_CNTL1		0x98
+
+#define HHI_XTAL_DIVN_CNTL		0xbc
+#define HHI_GCLK2_MPEG0			0xc0
+#define HHI_GCLK2_MPEG1			0xc4
+#define HHI_GCLK2_MPEG2			0xc8
+#define HHI_GCLK2_OTHER			0xd0
+#define HHI_GCLK2_AO			0xd4
+#define HHI_PCIE_PLL_CNTL		0xd8
+#define HHI_PCIE_PLL_CNTL1		0xdC
+#define HHI_PCIE_PLL_CNTL2		0xe0
+#define HHI_PCIE_PLL_CNTL3		0xe4
+#define HHI_PCIE_PLL_CNTL4		0xe8
+#define HHI_PCIE_PLL_CNTL5		0xec
+#define HHI_PCIE_PLL_CNTL6		0xf0
+#define HHI_PCIE_PLL_STS		0xf4
+
+#define HHI_MEM_PD_REG0			0x100
+#define HHI_VPU_MEM_PD_REG0		0x104
+#define HHI_VIID_CLK_DIV		0x128
+#define HHI_VIID_CLK_CNTL		0x12c
+
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_GCLK_AO			0x154
+#define HHI_SYS_CPU_CLK_CNTL1		0x15c
+#define HHI_SYS_CPU_RESET_CNTL		0x160
+#define HHI_VID_CLK_DIV			0x164
+#define HHI_SPICC_HCLK_CNTL		0x168
+
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c
+#define HHI_VID_PLL_CLK_DIV		0x1a0
+#define HHI_VPU_CLK_CNTL		0x1bC
+
+#define HHI_VAPBCLK_CNTL		0x1F4
+
+#define HHI_GEN_CLK_CNTL		0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL		0x250
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL		0x264
+
+#define HHI_MPLL_CNTL			0x280
+#define HHI_MPLL_CNTL2			0x284
+#define HHI_MPLL_CNTL3			0x288
+#define HHI_MPLL_CNTL4			0x28C
+#define HHI_MPLL_CNTL5			0x290
+#define HHI_MPLL_CNTL6			0x294
+#define HHI_MPLL_CNTL7			0x298
+#define HHI_MPLL_CNTL8			0x29C
+#define HHI_MPLL_CNTL9			0x2A0
+#define HHI_MPLL_CNTL10			0x2A4
+
+#define HHI_MPLL3_CNTL0			0x2E0
+#define HHI_MPLL3_CNTL1			0x2E4
+#define HHI_PLL_TOP_MISC		0x2E8
+
+#define HHI_SYS_PLL_CNTL1		0x2FC
+#define HHI_SYS_PLL_CNTL		0x300
+#define HHI_SYS_PLL_CNTL2		0x304
+#define HHI_SYS_PLL_CNTL3		0x308
+#define HHI_SYS_PLL_CNTL4		0x30c
+#define HHI_SYS_PLL_CNTL5		0x310
+#define HHI_SYS_PLL_STS			0x314
+#define HHI_DPLL_TOP_I			0x318
+#define HHI_DPLL_TOP2_I			0x31C
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/clock-g12a.h b/roms/u-boot/arch/arm/include/asm/arch-meson/clock-g12a.h
new file mode 100644
index 000000000..d52e27e00
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/clock-g12a.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - AmLogic, Inc.
+ * Copyright 2018 - Beniamino Galvani <b.galvani@gmail.com>
+ * Copyright 2018 - BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+#ifndef _ARCH_MESON_CLOCK_G12A_H_
+#define _ARCH_MESON_CLOCK_G12A_H_
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet are listed in comment blocks below.
+ * Those offsets must be multiplied by 4 before adding them to the base address
+ * to get the right value
+ */
+
+#define HHI_MIPI_CNTL0			0x000
+#define HHI_MIPI_CNTL1			0x004
+#define HHI_MIPI_CNTL2			0x008
+#define HHI_MIPI_STS			0x00C
+#define HHI_GP0_PLL_CNTL0		0x040
+#define HHI_GP0_PLL_CNTL1		0x044
+#define HHI_GP0_PLL_CNTL2		0x048
+#define HHI_GP0_PLL_CNTL3		0x04C
+#define HHI_GP0_PLL_CNTL4		0x050
+#define HHI_GP0_PLL_CNTL5		0x054
+#define HHI_GP0_PLL_CNTL6		0x058
+#define HHI_GP0_PLL_STS			0x05C
+#define HHI_PCIE_PLL_CNTL0		0x098
+#define HHI_PCIE_PLL_CNTL1		0x09C
+#define HHI_PCIE_PLL_CNTL2		0x0A0
+#define HHI_PCIE_PLL_CNTL3		0x0A4
+#define HHI_PCIE_PLL_CNTL4		0x0A8
+#define HHI_PCIE_PLL_CNTL5		0x0AC
+#define HHI_PCIE_PLL_STS		0x0B8
+#define HHI_HIFI_PLL_CNTL0		0x0D8
+#define HHI_HIFI_PLL_CNTL1		0x0DC
+#define HHI_HIFI_PLL_CNTL2		0x0E0
+#define HHI_HIFI_PLL_CNTL3		0x0E4
+#define HHI_HIFI_PLL_CNTL4		0x0E8
+#define HHI_HIFI_PLL_CNTL5		0x0EC
+#define HHI_HIFI_PLL_CNTL6		0x0F0
+#define HHI_VIID_CLK_DIV		0x128
+#define HHI_VIID_CLK_CNTL		0x12C
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_GCLK_OTHER2			0x154
+#define HHI_VID_CLK_DIV			0x164
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_AUD_CLK_CNTL		0x178
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c
+#define HHI_VID_PLL_CLK_DIV		0x1A0
+#define HHI_MALI_CLK_CNTL		0x1b0
+#define HHI_VPU_CLKC_CNTL		0x1b4
+#define HHI_VPU_CLK_CNTL		0x1bC
+#define HHI_HDMI_CLK_CNTL		0x1CC
+#define HHI_VDEC_CLK_CNTL		0x1E0
+#define HHI_VDEC2_CLK_CNTL		0x1E4
+#define HHI_VDEC3_CLK_CNTL		0x1E8
+#define HHI_VDEC4_CLK_CNTL		0x1EC
+#define HHI_HDCP22_CLK_CNTL		0x1F0
+#define HHI_VAPBCLK_CNTL		0x1F4
+#define HHI_VPU_CLKB_CNTL		0x20C
+#define HHI_GEN_CLK_CNTL		0x228
+#define HHI_VDIN_MEAS_CLK_CNTL		0x250
+#define HHI_MIPIDSI_PHY_CLK_CNTL	0x254
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL		0x264
+#define HHI_MPLL_CNTL0			0x278
+#define HHI_MPLL_CNTL1			0x27C
+#define HHI_MPLL_CNTL2			0x280
+#define HHI_MPLL_CNTL3			0x284
+#define HHI_MPLL_CNTL4			0x288
+#define HHI_MPLL_CNTL5			0x28c
+#define HHI_MPLL_CNTL6			0x290
+#define HHI_MPLL_CNTL7			0x294
+#define HHI_MPLL_CNTL8			0x298
+#define HHI_FIX_PLL_CNTL0		0x2A0
+#define HHI_FIX_PLL_CNTL1		0x2A4
+#define HHI_FIX_PLL_CNTL3		0x2AC
+#define HHI_SYS_PLL_CNTL0		0x2f4
+#define HHI_SYS_PLL_CNTL1		0x2f8
+#define HHI_SYS_PLL_CNTL2		0x2fc
+#define HHI_SYS_PLL_CNTL3		0x300
+#define HHI_SYS_PLL_CNTL4		0x304
+#define HHI_SYS_PLL_CNTL5		0x308
+#define HHI_SYS_PLL_CNTL6		0x30c
+#define HHI_HDMI_PLL_CNTL0		0x320
+#define HHI_HDMI_PLL_CNTL1		0x324
+#define HHI_HDMI_PLL_CNTL2		0x328
+#define HHI_HDMI_PLL_CNTL3		0x32c
+#define HHI_HDMI_PLL_CNTL4		0x330
+#define HHI_HDMI_PLL_CNTL5		0x334
+#define HHI_HDMI_PLL_CNTL6		0x338
+#define HHI_SPICC_CLK_CNTL		0x3dc
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/clock-gx.h b/roms/u-boot/arch/arm/include/asm/arch-meson/clock-gx.h
new file mode 100644
index 000000000..13a2e7688
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/clock-gx.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - AmLogic, Inc.
+ * Copyright 2018 - Beniamino Galvani <b.galvani@gmail.com>
+ */
+#ifndef _ARCH_MESON_CLOCK_GX_H_
+#define _ARCH_MESON_CLOCK_GX_H_
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet are listed in comment blocks below.
+ * Those offsets must be multiplied by 4 before adding them to the base address
+ * to get the right value
+ */
+#define SCR				0x2C /* 0x0b offset in data sheet */
+#define TIMEOUT_VALUE			0x3c /* 0x0f offset in data sheet */
+
+#define HHI_GP0_PLL_CNTL		0x40 /* 0x10 offset in data sheet */
+#define HHI_GP0_PLL_CNTL2		0x44 /* 0x11 offset in data sheet */
+#define HHI_GP0_PLL_CNTL3		0x48 /* 0x12 offset in data sheet */
+#define HHI_GP0_PLL_CNTL4		0x4c /* 0x13 offset in data sheet */
+#define	HHI_GP0_PLL_CNTL5		0x50 /* 0x14 offset in data sheet */
+#define	HHI_GP0_PLL_CNTL1		0x58 /* 0x16 offset in data sheet */
+
+#define	HHI_XTAL_DIVN_CNTL		0xbc /* 0x2f offset in data sheet */
+#define	HHI_TIMER90K			0xec /* 0x3b offset in data sheet */
+
+#define	HHI_MEM_PD_REG0			0x100 /* 0x40 offset in data sheet */
+#define	HHI_MEM_PD_REG1			0x104 /* 0x41 offset in data sheet */
+#define	HHI_VPU_MEM_PD_REG1		0x108 /* 0x42 offset in data sheet */
+#define	HHI_VIID_CLK_DIV		0x128 /* 0x4a offset in data sheet */
+#define	HHI_VIID_CLK_CNTL		0x12c /* 0x4b offset in data sheet */
+
+#define HHI_GCLK_MPEG0			0x140 /* 0x50 offset in data sheet */
+#define HHI_GCLK_MPEG1			0x144 /* 0x51 offset in data sheet */
+#define HHI_GCLK_MPEG2			0x148 /* 0x52 offset in data sheet */
+#define HHI_GCLK_OTHER			0x150 /* 0x54 offset in data sheet */
+#define HHI_GCLK_AO			0x154 /* 0x55 offset in data sheet */
+#define HHI_SYS_OSCIN_CNTL		0x158 /* 0x56 offset in data sheet */
+#define HHI_SYS_CPU_CLK_CNTL1		0x15c /* 0x57 offset in data sheet */
+#define HHI_SYS_CPU_RESET_CNTL		0x160 /* 0x58 offset in data sheet */
+#define HHI_VID_CLK_DIV			0x164 /* 0x59 offset in data sheet */
+
+#define HHI_MPEG_CLK_CNTL		0x174 /* 0x5d offset in data sheet */
+#define HHI_AUD_CLK_CNTL		0x178 /* 0x5e offset in data sheet */
+#define HHI_VID_CLK_CNTL		0x17c /* 0x5f offset in data sheet */
+#define HHI_AUD_CLK_CNTL2		0x190 /* 0x64 offset in data sheet */
+#define HHI_VID_CLK_CNTL2		0x194 /* 0x65 offset in data sheet */
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c /* 0x67 offset in data sheet */
+#define HHI_VID_PLL_CLK_DIV		0x1a0 /* 0x68 offset in data sheet */
+#define HHI_AUD_CLK_CNTL3		0x1a4 /* 0x69 offset in data sheet */
+#define HHI_MALI_CLK_CNTL		0x1b0 /* 0x6c offset in data sheet */
+#define HHI_VPU_CLK_CNTL		0x1bC /* 0x6f offset in data sheet */
+
+#define HHI_HDMI_CLK_CNTL		0x1CC /* 0x73 offset in data sheet */
+#define HHI_VDEC_CLK_CNTL		0x1E0 /* 0x78 offset in data sheet */
+#define HHI_VDEC2_CLK_CNTL		0x1E4 /* 0x79 offset in data sheet */
+#define HHI_VDEC3_CLK_CNTL		0x1E8 /* 0x7a offset in data sheet */
+#define HHI_VDEC4_CLK_CNTL		0x1EC /* 0x7b offset in data sheet */
+#define HHI_HDCP22_CLK_CNTL		0x1F0 /* 0x7c offset in data sheet */
+#define HHI_VAPBCLK_CNTL		0x1F4 /* 0x7d offset in data sheet */
+
+#define HHI_VPU_CLKB_CNTL		0x20C /* 0x83 offset in data sheet */
+#define HHI_USB_CLK_CNTL		0x220 /* 0x88 offset in data sheet */
+#define HHI_32K_CLK_CNTL		0x224 /* 0x89 offset in data sheet */
+#define HHI_GEN_CLK_CNTL		0x228 /* 0x8a offset in data sheet */
+#define HHI_GEN_CLK_CNTL		0x228 /* 0x8a offset in data sheet */
+
+#define HHI_PCM_CLK_CNTL		0x258 /* 0x96 offset in data sheet */
+#define HHI_NAND_CLK_CNTL		0x25C /* 0x97 offset in data sheet */
+#define HHI_SD_EMMC_CLK_CNTL		0x264 /* 0x99 offset in data sheet */
+
+#define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
+#define HHI_MPLL_CNTL2			0x284 /* 0xa1 offset in data sheet */
+#define HHI_MPLL_CNTL3			0x288 /* 0xa2 offset in data sheet */
+#define HHI_MPLL_CNTL4			0x28C /* 0xa3 offset in data sheet */
+#define HHI_MPLL_CNTL5			0x290 /* 0xa4 offset in data sheet */
+#define HHI_MPLL_CNTL6			0x294 /* 0xa5 offset in data sheet */
+#define HHI_MPLL_CNTL7			0x298 /* 0xa6 offset in data sheet */
+#define HHI_MPLL_CNTL8			0x29C /* 0xa7 offset in data sheet */
+#define HHI_MPLL_CNTL9			0x2A0 /* 0xa8 offset in data sheet */
+#define HHI_MPLL_CNTL10			0x2A4 /* 0xa9 offset in data sheet */
+
+#define HHI_MPLL3_CNTL0			0x2E0 /* 0xb8 offset in data sheet */
+#define HHI_MPLL3_CNTL1			0x2E4 /* 0xb9 offset in data sheet */
+#define HHI_VDAC_CNTL0			0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL1			0x2F8 /* 0xbe offset in data sheet */
+
+#define HHI_SYS_PLL_CNTL		0x300 /* 0xc0 offset in data sheet */
+#define HHI_SYS_PLL_CNTL2		0x304 /* 0xc1 offset in data sheet */
+#define HHI_SYS_PLL_CNTL3		0x308 /* 0xc2 offset in data sheet */
+#define HHI_SYS_PLL_CNTL4		0x30c /* 0xc3 offset in data sheet */
+#define HHI_SYS_PLL_CNTL5		0x310 /* 0xc4 offset in data sheet */
+#define HHI_DPLL_TOP_I			0x318 /* 0xc6 offset in data sheet */
+#define HHI_DPLL_TOP2_I			0x31C /* 0xc7 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL		0x320 /* 0xc8 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL2		0x324 /* 0xc9 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL3		0x328 /* 0xca offset in data sheet */
+#define HHI_HDMI_PLL_CNTL4		0x32C /* 0xcb offset in data sheet */
+#define HHI_HDMI_PLL_CNTL5		0x330 /* 0xcc offset in data sheet */
+#define HHI_HDMI_PLL_CNTL6		0x334 /* 0xcd offset in data sheet */
+#define HHI_HDMI_PLL_CNTL_I		0x338 /* 0xce offset in data sheet */
+#define HHI_HDMI_PLL_CNTL7		0x33C /* 0xcf offset in data sheet */
+
+#define HHI_HDMI_PHY_CNTL0		0x3A0 /* 0xe8 offset in data sheet */
+#define HHI_HDMI_PHY_CNTL1		0x3A4 /* 0xe9 offset in data sheet */
+#define HHI_HDMI_PHY_CNTL2		0x3A8 /* 0xea offset in data sheet */
+#define HHI_HDMI_PHY_CNTL3		0x3AC /* 0xeb offset in data sheet */
+
+#define HHI_VID_LOCK_CLK_CNTL		0x3C8 /* 0xf2 offset in data sheet */
+#define HHI_BT656_CLK_CNTL		0x3D4 /* 0xf5 offset in data sheet */
+#define HHI_SAR_CLK_CNTL		0x3D8 /* 0xf6 offset in data sheet */
+
+ulong meson_measure_clk_rate(unsigned int clk);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/eth.h b/roms/u-boot/arch/arm/include/asm/arch-meson/eth.h
new file mode 100644
index 000000000..c0070615c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/eth.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __MESON_ETH_H__
+#define __MESON_ETH_H__
+
+/* Generate an unique MAC address based on the HW serial */
+int meson_generate_serial_ethaddr(void);
+
+#endif /* __MESON_ETH_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/g12a.h b/roms/u-boot/arch/arm/include/asm/arch-meson/g12a.h
new file mode 100644
index 000000000..ef4f301f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/g12a.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __G12A_H__
+#define __G12A_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define G12A_AOBUS_BASE			0xff800000
+#define G12A_PERIPHS_BASE		0xff634400
+#define G12A_HIU_BASE			0xff63c000
+#define G12A_ETH_PHY_BASE		0xff64c000
+#define G12A_ETH_BASE			0xff3f0000
+
+/* Always-On Peripherals registers */
+#define G12A_AO_ADDR(off)	(G12A_AOBUS_BASE + ((off) << 2))
+
+#define G12A_AO_SEC_GP_CFG0		G12A_AO_ADDR(0x90)
+#define G12A_AO_SEC_GP_CFG3		G12A_AO_ADDR(0x93)
+#define G12A_AO_SEC_GP_CFG4		G12A_AO_ADDR(0x94)
+#define G12A_AO_SEC_GP_CFG5		G12A_AO_ADDR(0x95)
+
+#define G12A_AO_BOOT_DEVICE		0xF
+#define G12A_AO_MEM_SIZE_MASK		0xFFFF0000
+#define G12A_AO_MEM_SIZE_SHIFT		16
+#define G12A_AO_BL31_RSVMEM_SIZE_MASK	0xFFFF0000
+#define G12A_AO_BL31_RSVMEM_SIZE_SHIFT	16
+#define G12A_AO_BL32_RSVMEM_SIZE_MASK	0xFFFF
+
+#endif /* __G12A_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-meson/gpio.h
new file mode 100644
index 000000000..d0142f16e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/gpio.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 - Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#ifndef __ASM_ARCH_MESON_GPIO_H
+#define __ASM_ARCH_MESON_GPIO_H
+
+
+#endif	/* __ASM_ARCH_MESON_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/gx.h b/roms/u-boot/arch/arm/include/asm/arch-meson/gx.h
new file mode 100644
index 000000000..26ec5d0bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/gx.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#ifndef __GX_H__
+#define __GX_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define GX_FIRMWARE_MEM_SIZE	0x1000000
+
+#define GX_AOBUS_BASE		0xc8100000
+#define GX_PERIPHS_BASE	0xc8834400
+#define GX_HIU_BASE		0xc883c000
+#define GX_ETH_BASE		0xc9410000
+
+/* Always-On Peripherals registers */
+#define GX_AO_ADDR(off)	(GX_AOBUS_BASE + ((off) << 2))
+
+#define GX_AO_SEC_GP_CFG0	GX_AO_ADDR(0x90)
+#define GX_AO_SEC_GP_CFG3	GX_AO_ADDR(0x93)
+#define GX_AO_SEC_GP_CFG4	GX_AO_ADDR(0x94)
+#define GX_AO_SEC_GP_CFG5	GX_AO_ADDR(0x95)
+
+#define GX_AO_BOOT_DEVICE	0xF
+#define GX_AO_MEM_SIZE_MASK	0xFFFF0000
+#define GX_AO_MEM_SIZE_SHIFT	16
+#define GX_AO_BL31_RSVMEM_SIZE_MASK	0xFFFF0000
+#define GX_AO_BL31_RSVMEM_SIZE_SHIFT	16
+#define GX_AO_BL32_RSVMEM_SIZE_MASK	0xFFFF
+
+/* Peripherals registers */
+#define GX_PERIPHS_ADDR(off)	(GX_PERIPHS_BASE + ((off) << 2))
+
+/* GPIO registers 0 to 6 */
+#define _GX_GPIO_OFF(n)	((n) == 6 ? 0x08 : 0x0c + 3 * (n))
+#define GX_GPIO_EN(n)		GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 0)
+#define GX_GPIO_IN(n)		GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1)
+#define GX_GPIO_OUT(n)	GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
+
+#endif /* __GX_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-meson/i2c.h
new file mode 100644
index 000000000..aa474a05b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/i2c.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 - Beniamino Galvani <b.galvani@gmail.com>
+ */
+#ifndef _MESON_I2C_H_
+#define _MESON_I2C_H_
+
+#define MESON_I2C_CLK_RATE	167000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/mem.h b/roms/u-boot/arch/arm/include/asm/arch-meson/mem.h
new file mode 100644
index 000000000..a65100aeb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/mem.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __MESON_MEM_H__
+#define __MESON_MEM_H__
+
+/* Configure the reserved memory zones exported by the secure registers
+ * into EFI and DTB reserved memory entries.
+ */
+void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size);
+void meson_init_reserved_memory(void *fdt);
+
+#endif /* __MESON_MEM_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/meson-vpu.h b/roms/u-boot/arch/arm/include/asm/arch-meson/meson-vpu.h
new file mode 100644
index 000000000..f31dfa6ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/meson-vpu.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Maxime Jourdan <mjourdan@baylibre.com>
+ */
+
+#ifndef __MESON_VPU_H__
+#define __MESON_VPU_H__
+
+/* Allow reserving the framebuffer memory region */
+void meson_vpu_rsv_fb(void *fdt);
+
+#endif /* __MESON_VPU_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/sm.h b/roms/u-boot/arch/arm/include/asm/arch-meson/sm.h
new file mode 100644
index 000000000..f3ae46a6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/sm.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#ifndef __MESON_SM_H__
+#define __MESON_SM_H__
+
+ssize_t meson_sm_read_efuse(uintptr_t offset, void *buffer, size_t size);
+
+#define SM_SERIAL_SIZE	12
+
+int meson_sm_get_serial(void *buffer, size_t size);
+
+enum {
+	REBOOT_REASON_COLD = 0,
+	REBOOT_REASON_NORMAL = 1,
+	REBOOT_REASON_RECOVERY = 2,
+	REBOOT_REASON_UPDATE = 3,
+	REBOOT_REASON_FASTBOOT = 4,
+	REBOOT_REASON_SUSPEND_OFF = 5,
+	REBOOT_REASON_HIBERNATE = 6,
+	REBOOT_REASON_BOOTLOADER = 7,
+	REBOOT_REASON_SHUTDOWN_REBOOT = 8,
+	REBOOT_REASON_RPMBP = 9,
+	REBOOT_REASON_CRASH_DUMP = 11,
+	REBOOT_REASON_KERNEL_PANIC = 12,
+	REBOOT_REASON_WATCHDOG_REBOOT = 13,
+};
+
+int meson_sm_get_reboot_reason(void);
+
+#endif /* __MESON_SM_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/usb-gx.h b/roms/u-boot/arch/arm/include/asm/arch-meson/usb-gx.h
new file mode 100644
index 000000000..61f1809df
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/usb-gx.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+#ifndef _ARCH_MESON_USB_GX_H_
+#define _ARCH_MESON_USB_GX_H_
+
+#include <generic-phy.h>
+#include <linux/usb/otg.h>
+
+/* TOFIX add set_mode to struct phy_ops */
+void phy_meson_gxl_usb2_set_mode(struct phy *phy, enum usb_dr_mode mode);
+
+int dwc3_meson_gxl_force_mode(struct udevice *dev, enum usb_dr_mode mode);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-meson/usb.h b/roms/u-boot/arch/arm/include/asm/arch-meson/usb.h
new file mode 100644
index 000000000..b794b5ce7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-meson/usb.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __MESON_USB_H__
+#define __MESON_USB_H__
+
+int dwc3_meson_g12a_force_mode(struct udevice *dev, enum usb_dr_mode mode);
+
+#endif /* __MESON_USB_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mvebu/spi.h b/roms/u-boot/arch/arm/include/asm/arch-mvebu/spi.h
new file mode 100644
index 000000000..58b6c32c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mvebu/spi.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * Derived from drivers/spi/mpc8xxx_spi.c
+ */
+
+#ifndef __KW_SPI_H__
+#define __KW_SPI_H__
+
+/* SPI Registers on kirkwood SOC */
+struct kwspi_registers {
+	u32 ctrl;	/* 0x10600 */
+	u32 cfg;	/* 0x10604 */
+	u32 dout;	/* 0x10608 */
+	u32 din;	/* 0x1060c */
+	u32 irq_cause;	/* 0x10610 */
+	u32 irq_mask;	/* 0x10614 */
+	u32 timing1;	/* 0x10618 */
+	u32 timing2;	/* 0x1061c */
+	u32 dw_cfg;	/* 0x10620 - Direct Write Configuration */
+};
+
+/* Control Register */
+#define KWSPI_CSN_ACT		(1 << 0) /* Activates serial memory interface */
+#define KWSPI_SMEMRDY		(1 << 1) /* SerMem Data xfer ready */
+#define KWSPI_CS_SHIFT		2	/* chip select shift */
+#define KWSPI_CS_MASK		0x7	/* chip select mask */
+
+/* Configuration Register */
+#define KWSPI_CLKPRESCL_MASK	0x1f
+#define KWSPI_CLKPRESCL_MIN	0x12
+#define KWSPI_XFERLEN_1BYTE	0
+#define KWSPI_XFERLEN_2BYTE	(1 << 5)
+#define KWSPI_XFERLEN_MASK	(1 << 5)
+#define KWSPI_ADRLEN_1BYTE	0
+#define KWSPI_ADRLEN_2BYTE	(1 << 8)
+#define KWSPI_ADRLEN_3BYTE	(2 << 8)
+#define KWSPI_ADRLEN_4BYTE	(3 << 8)
+#define KWSPI_ADRLEN_MASK	(3 << 8)
+#define KWSPI_CPOL		(1 << 11)
+#define KWSPI_CPHA		(1 << 12)
+#define KWSPI_TXLSBF		(1 << 13)
+#define KWSPI_RXLSBF		(1 << 14)
+
+/* Timing Parameters 1 Register */
+#define KW_SPI_TMISO_SAMPLE_OFFSET	6
+#define KW_SPI_TMISO_SAMPLE_MASK	(0x3 << KW_SPI_TMISO_SAMPLE_OFFSET)
+#define KW_SPI_TMISO_SAMPLE_1		(1 << KW_SPI_TMISO_SAMPLE_OFFSET)
+#define KW_SPI_TMISO_SAMPLE_2		(2 << KW_SPI_TMISO_SAMPLE_OFFSET)
+
+#define KWSPI_IRQUNMASK		1 /* unmask SPI interrupt */
+#define KWSPI_IRQMASK		0 /* mask SPI interrupt */
+#define KWSPI_SMEMRDIRQ		1 /* SerMem data xfer ready irq */
+
+#define KWSPI_TIMEOUT		10000
+
+#endif /* __KW_SPI_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx25/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mx25/clock.h
new file mode 100644
index 000000000..3045b78d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx25/clock.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *
+ * (c) 2009 Ilya Yanok, Emcraft Systems <yanok@emcraft.com>
+ *
+ * Modified for mx25 by John Rigby <jrigby@gmail.com>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#ifdef CONFIG_MX25_HCLK_FREQ
+#define MXC_HCLK	CONFIG_MX25_HCLK_FREQ
+#else
+#define MXC_HCLK	24000000
+#endif
+
+#ifdef CONFIG_MX25_CLK32
+#define MXC_CLK32	CONFIG_MX25_CLK32
+#else
+#define MXC_CLK32	32768
+#endif
+
+enum mxc_clock {
+	/* PER clocks (do not change order) */
+	MXC_CSI_CLK,
+	MXC_EPIT_CLK,
+	MXC_ESAI_CLK,
+	MXC_ESDHC1_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_GPT_CLK,
+	MXC_I2C_CLK,
+	MXC_LCDC_CLK,
+	MXC_NFC_CLK,
+	MXC_OWIRE_CLK,
+	MXC_PWM_CLK,
+	MXC_SIM1_CLK,
+	MXC_SIM2_CLK,
+	MXC_SSI1_CLK,
+	MXC_SSI2_CLK,
+	MXC_UART_CLK,
+	/* Other clocks */
+	MXC_ARM_CLK,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_CSPI_CLK,
+	MXC_FEC_CLK,
+	MXC_CLK_NUM
+};
+
+int imx_set_perclk(enum mxc_clock clk, bool from_upll, unsigned int freq);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#define imx_get_uartclk()	mxc_get_clock(MXC_UART_CLK)
+#define imx_get_fecclk()	mxc_get_clock(MXC_FEC_CLK)
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx25/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mx25/gpio.h
new file mode 100644
index 000000000..1205695ce
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx25/gpio.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ */
+
+
+#ifndef __ASM_ARCH_MX25_GPIO_H
+#define __ASM_ARCH_MX25_GPIO_H
+
+#include <asm/mach-imx/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx25/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx25/imx-regs.h
new file mode 100644
index 000000000..57809697c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -0,0 +1,504 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009, DENX Software Engineering
+ * Author: John Rigby <jcrigby@gmail.com
+ *
+ *   Based on arch-mx31/imx-regs.h
+ *	Copyright (C) 2009 Ilya Yanok,
+ *		Emcraft Systems <yanok@emcraft.com>
+ *   and arch-mx27/imx-regs.h
+ *	Copyright (C) 2007 Pengutronix,
+ *		Sascha Hauer <s.hauer@pengutronix.de>
+ *	Copyright (C) 2009 Ilya Yanok,
+ *		Emcraft Systems <yanok@emcraft.com>
+ */
+
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+/* Clock Control Module (CCM) registers */
+struct ccm_regs {
+	u32 mpctl;	/* Core PLL Control */
+	u32 upctl;	/* USB PLL Control */
+	u32 cctl;	/* Clock Control */
+	u32 cgr0;	/* Clock Gating Control 0 */
+	u32 cgr1;	/* Clock Gating Control 1 */
+	u32 cgr2;	/* Clock Gating Control 2 */
+	u32 pcdr[4];	/* PER Clock Dividers */
+	u32 rcsr;	/* CCM Status */
+	u32 crdr;	/* CCM Reset and Debug */
+	u32 dcvr0;	/* DPTC Comparator Value 0 */
+	u32 dcvr1;	/* DPTC Comparator Value 1 */
+	u32 dcvr2;	/* DPTC Comparator Value 2 */
+	u32 dcvr3;	/* DPTC Comparator Value 3 */
+	u32 ltr0;	/* Load Tracking 0 */
+	u32 ltr1;	/* Load Tracking 1 */
+	u32 ltr2;	/* Load Tracking 2 */
+	u32 ltr3;	/* Load Tracking 3 */
+	u32 ltbr0;	/* Load Tracking Buffer 0 */
+	u32 ltbr1;	/* Load Tracking Buffer 1 */
+	u32 pcmr0;	/* Power Management Control 0 */
+	u32 pcmr1;	/* Power Management Control 1 */
+	u32 pcmr2;	/* Power Management Control 2 */
+	u32 mcr;	/* Miscellaneous Control */
+	u32 lpimr0;	/* Low Power Interrupt Mask 0 */
+	u32 lpimr1;	/* Low Power Interrupt Mask 1 */
+};
+
+/* Enhanced SDRAM Controller (ESDRAMC) registers */
+struct esdramc_regs {
+	u32 ctl0; 	/* control 0 */
+	u32 cfg0; 	/* configuration 0 */
+	u32 ctl1; 	/* control 1 */
+	u32 cfg1; 	/* configuration 1 */
+	u32 misc; 	/* miscellaneous */
+	u32 pad[3];
+	u32 cdly1;	/* Delay Line 1 configuration debug */
+	u32 cdly2;	/* delay line 2 configuration debug */
+	u32 cdly3;	/* delay line 3 configuration debug */
+	u32 cdly4;	/* delay line 4 configuration debug */
+	u32 cdly5;	/* delay line 5 configuration debug */
+	u32 cdlyl;	/* delay line cycle length debug */
+};
+
+/* General Purpose Timer (GPT) registers */
+struct gpt_regs {
+	u32 ctrl;   	/* control */
+	u32 pre;    	/* prescaler */
+	u32 stat;   	/* status */
+	u32 intr;   	/* interrupt */
+	u32 cmp[3]; 	/* output compare 1-3 */
+	u32 capt[2];	/* input capture 1-2 */
+	u32 counter;	/* counter */
+};
+
+/* Watchdog Timer (WDOG) registers */
+struct wdog_regs {
+	u16 wcr;	/* Control */
+	u16 wsr;	/* Service */
+	u16 wrsr;	/* Reset Status */
+	u16 wicr;	/* Interrupt Control */
+	u16 wmcr;	/* Misc Control */
+};
+
+/* IIM control registers */
+struct iim_regs {
+	u32 iim_stat;
+	u32 iim_statm;
+	u32 iim_err;
+	u32 iim_emask;
+	u32 iim_fctl;
+	u32 iim_ua;
+	u32 iim_la;
+	u32 iim_sdat;
+	u32 iim_prev;
+	u32 iim_srev;
+	u32 iim_prg_p;
+	u32 iim_scs0;
+	u32 iim_scs1;
+	u32 iim_scs2;
+	u32 iim_scs3;
+	u32 res1[0x1f1];
+	struct fuse_bank {
+		u32 fuse_regs[0x20];
+		u32 fuse_rsvd[0xe0];
+	} bank[3];
+};
+
+struct fuse_bank0_regs {
+	u32 fuse0_7[8];
+	u32 uid[8];
+	u32 fuse16_25[0xa];
+	u32 mac_addr[6];
+};
+
+struct fuse_bank1_regs {
+	u32 fuse0_21[0x16];
+	u32 usr5;
+	u32 fuse23_29[7];
+	u32 usr6[2];
+};
+
+/* Multi-Layer AHB Crossbar Switch (MAX) registers */
+struct max_regs {
+	u32 mpr0;
+	u32 pad00[3];
+	u32 sgpcr0;
+	u32 pad01[59];
+	u32 mpr1;
+	u32 pad02[3];
+	u32 sgpcr1;
+	u32 pad03[59];
+	u32 mpr2;
+	u32 pad04[3];
+	u32 sgpcr2;
+	u32 pad05[59];
+	u32 mpr3;
+	u32 pad06[3];
+	u32 sgpcr3;
+	u32 pad07[59];
+	u32 mpr4;
+	u32 pad08[3];
+	u32 sgpcr4;
+	u32 pad09[251];
+	u32 mgpcr0;
+	u32 pad10[63];
+	u32 mgpcr1;
+	u32 pad11[63];
+	u32 mgpcr2;
+	u32 pad12[63];
+	u32 mgpcr3;
+	u32 pad13[63];
+	u32 mgpcr4;
+};
+
+/* AHB <-> IP-Bus Interface (AIPS) */
+struct aips_regs {
+	u32 mpr_0_7;
+	u32 mpr_8_15;
+};
+/* LCD controller registers */
+struct lcdc_regs {
+	u32 lssar;	/* Screen Start Address */
+	u32 lsr;	/* Size */
+	u32 lvpwr;	/* Virtual Page Width */
+	u32 lcpr;	/* Cursor Position */
+	u32 lcwhb;	/* Cursor Width Height and Blink */
+	u32 lccmr;	/* Color Cursor Mapping */
+	u32 lpcr;	/* Panel Configuration */
+	u32 lhcr;	/* Horizontal Configuration */
+	u32 lvcr;	/* Vertical Configuration */
+	u32 lpor;	/* Panning Offset */
+	u32 lscr;	/* Sharp Configuration */
+	u32 lpccr;	/* PWM Contrast Control */
+	u32 ldcr;	/* DMA Control */
+	u32 lrmcr;	/* Refresh Mode Control */
+	u32 licr;	/* Interrupt Configuration */
+	u32 lier;	/* Interrupt Enable */
+	u32 lisr;	/* Interrupt Status */
+	u32 res0[3];
+	u32 lgwsar;	/* Graphic Window Start Address */
+	u32 lgwsr;	/* Graphic Window Size */
+	u32 lgwvpwr;	/* Graphic Window Virtual Page Width Regist */
+	u32 lgwpor;	/* Graphic Window Panning Offset */
+	u32 lgwpr;	/* Graphic Window Position */
+	u32 lgwcr;	/* Graphic Window Control */
+	u32 lgwdcr;	/* Graphic Window DMA Control */
+	u32 res1[5];
+	u32 lauscr;	/* AUS Mode Control */
+	u32 lausccr;	/* AUS mode Cursor Control */
+	u32 res2[31 + 64*7];
+	u32 bglut;	/* Background Lookup Table */
+	u32 gwlut;	/* Graphic Window Lookup Table */
+};
+
+/* Wireless External Interface Module Registers */
+struct weim_regs {
+	u32 cscr0u;	/* Chip Select 0 Upper Register */
+	u32 cscr0l;	/* Chip Select 0 Lower Register */
+	u32 cscr0a;	/* Chip Select 0 Addition Register */
+	u32 pad0;
+	u32 cscr1u;	/* Chip Select 1 Upper Register */
+	u32 cscr1l;	/* Chip Select 1 Lower Register */
+	u32 cscr1a;	/* Chip Select 1 Addition Register */
+	u32 pad1;
+	u32 cscr2u;	/* Chip Select 2 Upper Register */
+	u32 cscr2l;	/* Chip Select 2 Lower Register */
+	u32 cscr2a;	/* Chip Select 2 Addition Register */
+	u32 pad2;
+	u32 cscr3u;	/* Chip Select 3 Upper Register */
+	u32 cscr3l;	/* Chip Select 3 Lower Register */
+	u32 cscr3a;	/* Chip Select 3 Addition Register */
+	u32 pad3;
+	u32 cscr4u;	/* Chip Select 4 Upper Register */
+	u32 cscr4l;	/* Chip Select 4 Lower Register */
+	u32 cscr4a;	/* Chip Select 4 Addition Register */
+	u32 pad4;
+	u32 cscr5u;	/* Chip Select 5 Upper Register */
+	u32 cscr5l;	/* Chip Select 5 Lower Register */
+	u32 cscr5a;	/* Chip Select 5 Addition Register */
+	u32 pad5;
+	u32 wcr;	/* WEIM Configuration Register */
+};
+
+/* Multi-Master Memory Interface */
+struct m3if_regs {
+	u32 ctl;	/* Control Register */
+	u32 wcfg0;	/* Watermark Configuration Register 0 */
+	u32 wcfg1;	/* Watermark Configuration Register1 */
+	u32 wcfg2;	/* Watermark Configuration Register2 */
+	u32 wcfg3;	/* Watermark Configuration Register 3 */
+	u32 wcfg4;	/* Watermark Configuration Register 4 */
+	u32 wcfg5;	/* Watermark Configuration Register 5 */
+	u32 wcfg6;	/* Watermark Configuration Register 6 */
+	u32 wcfg7;	/* Watermark Configuration Register 7 */
+	u32 wcsr;	/* Watermark Control and Status Register */
+	u32 scfg0;	/* Snooping Configuration Register 0 */
+	u32 scfg1;	/* Snooping Configuration Register 1 */
+	u32 scfg2;	/* Snooping Configuration Register 2 */
+	u32 ssr0;	/* Snooping Status Register 0 */
+	u32 ssr1;	/* Snooping Status Register 1 */
+	u32 res0;
+	u32 mlwe0;	/* Master Lock WEIM CS0 Register */
+	u32 mlwe1;	/* Master Lock WEIM CS1 Register */
+	u32 mlwe2;	/* Master Lock WEIM CS2 Register */
+	u32 mlwe3;	/* Master Lock WEIM CS3 Register */
+	u32 mlwe4;	/* Master Lock WEIM CS4 Register */
+	u32 mlwe5;	/* Master Lock WEIM CS5 Register */
+};
+
+/* Pulse width modulation */
+struct pwm_regs {
+	u32 cr;	/* Control Register */
+	u32 sr;	/* Status Register */
+	u32 ir;	/* Interrupt Register */
+	u32 sar;	/* Sample Register */
+	u32 pr;	/* Period Register */
+	u32 cnr;	/* Counter Register */
+};
+
+/* Enhanced Periodic Interrupt Timer */
+struct epit_regs {
+	u32 cr;	/* Control register */
+	u32 sr;	/* Status register */
+	u32 lr;	/* Load register */
+	u32 cmpr;	/* Compare register */
+	u32 cnr;	/* Counter register */
+};
+
+#endif
+
+#define ARCH_MXC
+
+/* AIPS 1 */
+#define IMX_AIPS1_BASE		(0x43F00000)
+#define IMX_MAX_BASE		(0x43F04000)
+#define IMX_CLKCTL_BASE		(0x43F08000)
+#define IMX_ETB_SLOT4_BASE	(0x43F0C000)
+#define IMX_ETB_SLOT5_BASE	(0x43F10000)
+#define IMX_ECT_CTIO_BASE	(0x43F18000)
+#define I2C1_BASE_ADDR		(0x43F80000)
+#define I2C3_BASE_ADDR		(0x43F84000)
+#define IMX_CAN1_BASE		(0x43F88000)
+#define IMX_CAN2_BASE		(0x43F8C000)
+#define UART1_BASE		(0x43F90000)
+#define UART2_BASE		(0x43F94000)
+#define I2C2_BASE_ADDR		(0x43F98000)
+#define IMX_OWIRE_BASE		(0x43F9C000)
+#define IMX_CSPI1_BASE		(0x43FA4000)
+#define IMX_KPP_BASE		(0x43FA8000)
+#define IMX_IOPADMUX_BASE	(0x43FAC000)
+#define IOMUXC_BASE_ADDR	IMX_IOPADMUX_BASE
+#define IMX_IOPADCTL_BASE	(0x43FAC22C)
+#define IMX_IOPADGRPCTL_BASE	(0x43FAC418)
+#define IMX_IOPADINPUTSEL_BASE	(0x43FAC460)
+#define IMX_AUDMUX_BASE		(0x43FB0000)
+#define IMX_ECT_IP1_BASE	(0x43FB8000)
+#define IMX_ECT_IP2_BASE	(0x43FBC000)
+
+/* SPBA */
+#define IMX_SPBA_BASE		(0x50000000)
+#define IMX_CSPI3_BASE		(0x50004000)
+#define UART4_BASE		(0x50008000)
+#define UART3_BASE		(0x5000C000)
+#define IMX_CSPI2_BASE		(0x50010000)
+#define IMX_SSI2_BASE		(0x50014000)
+#define IMX_ESAI_BASE		(0x50018000)
+#define IMX_ATA_DMA_BASE	(0x50020000)
+#define IMX_SIM1_BASE		(0x50024000)
+#define IMX_SIM2_BASE		(0x50028000)
+#define UART5_BASE		(0x5002C000)
+#define IMX_TSC_BASE		(0x50030000)
+#define IMX_SSI1_BASE		(0x50034000)
+#define IMX_FEC_BASE		(0x50038000)
+#define IMX_SPBA_CTRL_BASE	(0x5003C000)
+
+/* AIPS 2 */
+#define IMX_AIPS2_BASE		(0x53F00000)
+#define IMX_CCM_BASE		(0x53F80000)
+#define IMX_GPT4_BASE		(0x53F84000)
+#define IMX_GPT3_BASE		(0x53F88000)
+#define IMX_GPT2_BASE		(0x53F8C000)
+#define IMX_GPT1_BASE		(0x53F90000)
+#define IMX_EPIT1_BASE		(0x53F94000)
+#define IMX_EPIT2_BASE		(0x53F98000)
+#define IMX_GPIO4_BASE		(0x53F9C000)
+#define IMX_PWM2_BASE		(0x53FA0000)
+#define IMX_GPIO3_BASE		(0x53FA4000)
+#define IMX_PWM3_BASE		(0x53FA8000)
+#define IMX_SCC_BASE		(0x53FAC000)
+#define IMX_SCM_BASE		(0x53FAE000)
+#define IMX_SMN_BASE		(0x53FAF000)
+#define IMX_RNGD_BASE		(0x53FB0000)
+#define IMX_MMC_SDHC1_BASE	(0x53FB4000)
+#define IMX_MMC_SDHC2_BASE	(0x53FB8000)
+#define IMX_LCDC_BASE		(0x53FBC000)
+#define IMX_SLCDC_BASE		(0x53FC0000)
+#define IMX_PWM4_BASE		(0x53FC8000)
+#define IMX_GPIO1_BASE		(0x53FCC000)
+#define IMX_GPIO2_BASE		(0x53FD0000)
+#define IMX_SDMA_BASE		(0x53FD4000)
+#define IMX_WDT_BASE		(0x53FDC000)
+#define WDOG1_BASE_ADDR	IMX_WDT_BASE
+#define IMX_PWM1_BASE		(0x53FE0000)
+#define IMX_RTIC_BASE		(0x53FEC000)
+#define IMX_IIM_BASE		(0x53FF0000)
+#define IIM_BASE_ADDR		IMX_IIM_BASE
+#define IMX_USB_BASE		(0x53FF4000)
+/*
+ * This is in contradiction to the imx25 reference manual, which says that
+ * port 1's registers start at 0x53FF4200. The correct base address for
+ * port 1 is 0x53FF4400. The kernel uses 0x53FF4400 as well.
+ */
+#define IMX_USB_PORT_OFFSET	0x400
+#define IMX_CSI_BASE		(0x53FF8000)
+#define IMX_DRYICE_BASE		(0x53FFC000)
+
+#define IMX_ARM926_ROMPATCH	(0x60000000)
+#define IMX_ARM926_ASIC		(0x68000000)
+
+/* 128K Internal Static RAM */
+#define IMX_RAM_BASE		(0x78000000)
+#define IMX_RAM_SIZE		(128 * 1024)
+
+/* SDRAM BANKS */
+#define IMX_SDRAM_BANK0_BASE	(0x80000000)
+#define IMX_SDRAM_BANK1_BASE	(0x90000000)
+
+#define IMX_WEIM_CS0		(0xA0000000)
+#define IMX_WEIM_CS1		(0xA8000000)
+#define IMX_WEIM_CS2		(0xB0000000)
+#define IMX_WEIM_CS3		(0xB2000000)
+#define IMX_WEIM_CS4		(0xB4000000)
+#define IMX_ESDRAMC_BASE	(0xB8001000)
+#define IMX_WEIM_CTRL_BASE	(0xB8002000)
+#define IMX_M3IF_CTRL_BASE	(0xB8003000)
+#define IMX_EMI_CTRL_BASE	(0xB8004000)
+
+/* NAND Flash Controller */
+#define IMX_NFC_BASE		(0xBB000000)
+#define NFC_BASE_ADDR		IMX_NFC_BASE
+
+/* CCM bitfields */
+#define CCM_PLL_MFI_SHIFT	10
+#define CCM_PLL_MFI_MASK	0xf
+#define CCM_PLL_MFN_SHIFT	0
+#define CCM_PLL_MFN_MASK	0x3ff
+#define CCM_PLL_MFD_SHIFT	16
+#define CCM_PLL_MFD_MASK	0x3ff
+#define CCM_PLL_PD_SHIFT	26
+#define CCM_PLL_PD_MASK		0xf
+#define CCM_CCTL_ARM_DIV_SHIFT	30
+#define CCM_CCTL_ARM_DIV_MASK	3
+#define CCM_CCTL_AHB_DIV_SHIFT	28
+#define CCM_CCTL_AHB_DIV_MASK	3
+#define CCM_CCTL_ARM_SRC	(1 << 14)
+#define CCM_CGR1_GPT1		(1 << 19)
+#define CCM_PERCLK_REG(clk)	(clk / 4)
+#define CCM_PERCLK_SHIFT(clk)	(8 * (clk % 4))
+#define CCM_PERCLK_MASK		0x3f
+#define CCM_RCSR_NF_16BIT_SEL	(1 << 14)
+#define CCM_RCSR_NF_PS(v)	((v >> 26) & 3)
+#define CCM_CRDR_BT_UART_SRC_SHIFT	29
+#define CCM_CRDR_BT_UART_SRC_MASK	7
+
+/* ESDRAM Controller register bitfields */
+#define ESDCTL_PRCT(x)		(((x) & 0x3f) << 0)
+#define ESDCTL_BL		(1 << 7)
+#define ESDCTL_FP		(1 << 8)
+#define ESDCTL_PWDT(x)		(((x) & 3) << 10)
+#define ESDCTL_SREFR(x)		(((x) & 7) << 13)
+#define ESDCTL_DSIZ_16_UPPER	(0 << 16)
+#define ESDCTL_DSIZ_16_LOWER	(1 << 16)
+#define ESDCTL_DSIZ_32		(2 << 16)
+#define ESDCTL_COL8		(0 << 20)
+#define ESDCTL_COL9		(1 << 20)
+#define ESDCTL_COL10		(2 << 20)
+#define ESDCTL_ROW11		(0 << 24)
+#define ESDCTL_ROW12		(1 << 24)
+#define ESDCTL_ROW13		(2 << 24)
+#define ESDCTL_ROW14		(3 << 24)
+#define ESDCTL_ROW15		(4 << 24)
+#define ESDCTL_SP		(1 << 27)
+#define ESDCTL_SMODE_NORMAL	(0 << 28)
+#define ESDCTL_SMODE_PRECHARGE	(1 << 28)
+#define ESDCTL_SMODE_AUTO_REF	(2 << 28)
+#define ESDCTL_SMODE_LOAD_MODE	(3 << 28)
+#define ESDCTL_SMODE_MAN_REF	(4 << 28)
+#define ESDCTL_SDE		(1 << 31)
+
+#define ESDCFG_TRC(x)		(((x) & 0xf) << 0)
+#define ESDCFG_TRCD(x)		(((x) & 0x7) << 4)
+#define ESDCFG_TCAS(x)		(((x) & 0x3) << 8)
+#define ESDCFG_TRRD(x)		(((x) & 0x3) << 10)
+#define ESDCFG_TRAS(x)		(((x) & 0x7) << 12)
+#define ESDCFG_TWR		(1 << 15)
+#define ESDCFG_TMRD(x)		(((x) & 0x3) << 16)
+#define ESDCFG_TRP(x)		(((x) & 0x3) << 18)
+#define ESDCFG_TWTR		(1 << 20)
+#define ESDCFG_TXP(x)		(((x) & 0x3) << 21)
+
+#define ESDMISC_RST		(1 << 1)
+#define ESDMISC_MDDREN		(1 << 2)
+#define ESDMISC_MDDR_DL_RST	(1 << 3)
+#define ESDMISC_MDDR_MDIS	(1 << 4)
+#define ESDMISC_LHD		(1 << 5)
+#define ESDMISC_MA10_SHARE	(1 << 6)
+#define ESDMISC_SDRAM_RDY	(1 << 31)
+
+/* GPT bits */
+#define GPT_CTRL_SWR		(1 << 15)	/* Software reset */
+#define GPT_CTRL_FRR		(1 << 9)	/* Freerun / restart */
+#define GPT_CTRL_CLKSOURCE_32	(4 << 6)	/* Clock source	*/
+#define GPT_CTRL_TEN		1		/* Timer enable	*/
+
+/* WDOG enable */
+#define WCR_WDE 		0x04
+#define WSR_UNLOCK1		0x5555
+#define WSR_UNLOCK2		0xAAAA
+
+/* MAX bits */
+#define MAX_MGPCR_AULB(x)	(((x) & 0x7) << 0)
+
+/* M3IF bits */
+#define M3IF_CTL_MRRP(x)	(((x) & 0xff) << 0)
+
+/* WEIM bits */
+/* 13 fields of the upper CS control register */
+#define WEIM_CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
+		cnc, wsc, ew, wws, edc) \
+		((sp) << 31 | (wp) << 30 | (bcd) << 28 | (bcs) << 24 | \
+		(psz) << 22 | (pme) << 21 | (sync) << 20 | (dol) << 16 | \
+		(cnc) << 14 | (wsc) << 8 | (ew) << 7 | (wws) << 4 | (edc) << 0)
+/* 12 fields of the lower CS control register */
+#define WEIM_CSCR_L(oea, oen, ebwa, ebwn, \
+		csa, ebc, dsz, csn, psr, cre, wrap, csen) \
+		((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
+		(csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
+		(psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
+/* 14 fields of the additional CS control register */
+#define WEIM_CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
+		wwu, age, cnc2, fce) \
+		((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
+		(mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
+		(dww) << 6 | (dct) << 4 | (wwu) << 3 |\
+		(age) << 2 | (cnc2) << 1 | (fce) << 0)
+
+/* Names used in GPIO driver */
+#define GPIO1_BASE_ADDR		IMX_GPIO1_BASE
+#define GPIO2_BASE_ADDR		IMX_GPIO2_BASE
+#define GPIO3_BASE_ADDR		IMX_GPIO3_BASE
+#define GPIO4_BASE_ADDR		IMX_GPIO4_BASE
+
+/*
+ * CSPI register definitions
+ */
+#define MXC_SPI_BASE_ADDRESSES \
+	IMX_CSPI1_BASE, \
+	IMX_CSPI2_BASE, \
+	IMX_CSPI3_BASE
+
+#endif				/* _IMX_REGS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx25/iomux-mx25.h b/roms/u-boot/arch/arm/include/asm/arch-mx25/iomux-mx25.h
new file mode 100644
index 000000000..1ce7a8586
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx25/iomux-mx25.h
@@ -0,0 +1,537 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on mainline Linux i.MX iomux-mx25.h file:
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * Based on Linux arch/arm/mach-mx25/mx25_pins.h:
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and Linux arch/arm/plat-mxc/include/mach/iomux-mx35.h:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ */
+
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+/* Pad control groupings */
+#define MX25_KPP_ROW_PAD_CTRL	PAD_CTL_PUS_100K_UP
+#define MX25_KPP_COL_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+/*
+ * The naming convention for the pad modes is MX25_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux-v3.h
+ */
+
+/*							    PAD    MUX    ALT INPSE PATH PADCTRL */
+enum {
+	MX25_PAD_A10__A10			= IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A10__GPIO_4_0			= IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A13__A13			= IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A13__GPIO_4_1			= IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A14__A14			= IOMUX_PAD(0x230, 0x010, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A14__GPIO_2_0			= IOMUX_PAD(0x230, 0x010, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A15__A15			= IOMUX_PAD(0x234, 0x014, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A15__GPIO_2_1			= IOMUX_PAD(0x234, 0x014, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A16__A16			= IOMUX_PAD(0x000, 0x018, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A16__GPIO_2_2			= IOMUX_PAD(0x000, 0x018, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A17__A17			= IOMUX_PAD(0x238, 0x01c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A17__GPIO_2_3			= IOMUX_PAD(0x238, 0x01c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A18__A18			= IOMUX_PAD(0x23c, 0x020, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A18__GPIO_2_4			= IOMUX_PAD(0x23c, 0x020, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A18__FEC_COL			= IOMUX_PAD(0x23c, 0x020, 0x07, 0x504, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A19__A19			= IOMUX_PAD(0x240, 0x024, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A19__FEC_RX_ER			= IOMUX_PAD(0x240, 0x024, 0x07, 0x518, 0, NO_PAD_CTRL),
+	MX25_PAD_A19__GPIO_2_5			= IOMUX_PAD(0x240, 0x024, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A20__A20			= IOMUX_PAD(0x244, 0x028, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A20__GPIO_2_6			= IOMUX_PAD(0x244, 0x028, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A20__FEC_RDATA2		= IOMUX_PAD(0x244, 0x028, 0x07, 0x50c, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A21__A21			= IOMUX_PAD(0x248, 0x02c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A21__GPIO_2_7			= IOMUX_PAD(0x248, 0x02c, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A21__FEC_RDATA3		= IOMUX_PAD(0x248, 0x02c, 0x07, 0x510, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A22__A22			= IOMUX_PAD(0x000, 0x030, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A22__GPIO_2_8			= IOMUX_PAD(0x000, 0x030, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A23__A23			= IOMUX_PAD(0x24c, 0x034, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A23__GPIO_2_9			= IOMUX_PAD(0x24c, 0x034, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A24__A24			= IOMUX_PAD(0x250, 0x038, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A24__GPIO_2_10			= IOMUX_PAD(0x250, 0x038, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A24__FEC_RX_CLK		= IOMUX_PAD(0x250, 0x038, 0x07, 0x514, 0, NO_PAD_CTRL),
+
+	MX25_PAD_A25__A25			= IOMUX_PAD(0x254, 0x03c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A25__GPIO_2_11			= IOMUX_PAD(0x254, 0x03c, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_A25__FEC_CRS			= IOMUX_PAD(0x254, 0x03c, 0x07, 0x508, 0, NO_PAD_CTRL),
+
+	MX25_PAD_EB0__EB0			= IOMUX_PAD(0x258, 0x040, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_EB0__AUD4_TXD			= IOMUX_PAD(0x258, 0x040, 0x04, 0x464, 0, NO_PAD_CTRL),
+	MX25_PAD_EB0__GPIO_2_12			= IOMUX_PAD(0x258, 0x040, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_EB1__EB1			= IOMUX_PAD(0x25c, 0x044, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_EB1__AUD4_RXD			= IOMUX_PAD(0x25c, 0x044, 0x04, 0x460, 0, NO_PAD_CTRL),
+	MX25_PAD_EB1__GPIO_2_13			= IOMUX_PAD(0x25c, 0x044, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_OE__OE				= IOMUX_PAD(0x260, 0x048, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_OE__AUD4_TXC			= IOMUX_PAD(0x260, 0x048, 0x04, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_OE__GPIO_2_14			= IOMUX_PAD(0x260, 0x048, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CS0__CS0			= IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CS0__GPIO_4_2			= IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CS1__CS1			= IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CS1__NF_CE3			= IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CS1__GPIO_4_3			= IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CS4__CS4			= IOMUX_PAD(0x264, 0x054, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CS4__NF_CE1			= IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CS4__UART5_CTS			= IOMUX_PAD(0x264, 0x054, 0x03, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CS4__GPIO_3_20			= IOMUX_PAD(0x264, 0x054, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CS5__CS5			= IOMUX_PAD(0x268, 0x058, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CS5__NF_CE2			= IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CS5__UART5_RTS			= IOMUX_PAD(0x268, 0x058, 0x03, 0x574, 0, NO_PAD_CTRL),
+	MX25_PAD_CS5__GPIO_3_21			= IOMUX_PAD(0x268, 0x058, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_NF_CE0__NF_CE0			= IOMUX_PAD(0x26c, 0x05c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_NF_CE0__GPIO_3_22		= IOMUX_PAD(0x26c, 0x05c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_ECB__ECB			= IOMUX_PAD(0x270, 0x060, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_ECB__UART5_TXD_MUX		= IOMUX_PAD(0x270, 0x060, 0x03, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_ECB__GPIO_3_23			= IOMUX_PAD(0x270, 0x060, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LBA__LBA			= IOMUX_PAD(0x274, 0x064, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_LBA__UART5_RXD_MUX		= IOMUX_PAD(0x274, 0x064, 0x03, 0x578, 0, NO_PAD_CTRL),
+	MX25_PAD_LBA__GPIO_3_24			= IOMUX_PAD(0x274, 0x064, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_BCLK__BCLK			= IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_BCLK__GPIO_4_4			= IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_RW__RW				= IOMUX_PAD(0x278, 0x06c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_RW__AUD4_TXFS			= IOMUX_PAD(0x278, 0x06c, 0x04, 0x474, 0, NO_PAD_CTRL),
+	MX25_PAD_RW__GPIO_3_25			= IOMUX_PAD(0x278, 0x06c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_NFWE_B__NFWE_B			= IOMUX_PAD(0x000, 0x070, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_NFWE_B__GPIO_3_26		= IOMUX_PAD(0x000, 0x070, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_NFRE_B__NFRE_B			= IOMUX_PAD(0x000, 0x074, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_NFRE_B__GPIO_3_27		= IOMUX_PAD(0x000, 0x074, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_NFALE__NFALE			= IOMUX_PAD(0x000, 0x078, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_NFALE__GPIO_3_28		= IOMUX_PAD(0x000, 0x078, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_NFCLE__NFCLE			= IOMUX_PAD(0x000, 0x07c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_NFCLE__GPIO_3_29		= IOMUX_PAD(0x000, 0x07c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_NFWP_B__NFWP_B			= IOMUX_PAD(0x000, 0x080, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_NFWP_B__GPIO_3_30		= IOMUX_PAD(0x000, 0x080, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_NFRB__NFRB			= IOMUX_PAD(0x27c, 0x084, 0x00, 0, 0, PAD_CTL_PKE),
+	MX25_PAD_NFRB__GPIO_3_31		= IOMUX_PAD(0x27c, 0x084, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D15__D15			= IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D15__LD16			= IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_D15__GPIO_4_5			= IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D14__D14			= IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D14__LD17			= IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_D14__GPIO_4_6			= IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D13__D13			= IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D13__LD18			= IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_D13__GPIO_4_7			= IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D12__D12			= IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D12__GPIO_4_8			= IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D11__D11			= IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D11__GPIO_4_9			= IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D10__D10			= IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D10__GPIO_4_10			= IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D10__USBOTG_OC			= IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP),
+
+	MX25_PAD_D9__D9				= IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D9__GPIO_4_11			= IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D9__USBH2_PWR			= IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE),
+
+	MX25_PAD_D8__D8				= IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D8__GPIO_4_12			= IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D8__USBH2_OC			= IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP),
+
+	MX25_PAD_D7__D7				= IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D7__GPIO_4_13			= IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D6__D6				= IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D6__GPIO_4_14			= IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D5__D5				= IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D5__GPIO_4_15			= IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D4__D4				= IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D4__GPIO_4_16			= IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D3__D3				= IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D3__GPIO_4_17			= IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D2__D2				= IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D2__GPIO_4_18			= IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D1__D1				= IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D1__GPIO_4_19			= IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_D0__D0				= IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_D0__GPIO_4_20			= IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD0__LD0			= IOMUX_PAD(0x2c0, 0x0c8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD0__CSI_D0			= IOMUX_PAD(0x2c0, 0x0c8, 0x02, 0x488, 0, NO_PAD_CTRL),
+	MX25_PAD_LD0__GPIO_2_15			= IOMUX_PAD(0x2c0, 0x0c8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD1__LD1			= IOMUX_PAD(0x2c4, 0x0cc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD1__CSI_D1			= IOMUX_PAD(0x2c4, 0x0cc, 0x02, 0x48c, 0, NO_PAD_CTRL),
+	MX25_PAD_LD1__GPIO_2_16			= IOMUX_PAD(0x2c4, 0x0cc, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD2__LD2			= IOMUX_PAD(0x2c8, 0x0d0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD2__GPIO_2_17			= IOMUX_PAD(0x2c8, 0x0d0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD3__LD3			= IOMUX_PAD(0x2cc, 0x0d4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD3__GPIO_2_18			= IOMUX_PAD(0x2cc, 0x0d4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD4__LD4			= IOMUX_PAD(0x2d0, 0x0d8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD4__GPIO_2_19			= IOMUX_PAD(0x2d0, 0x0d8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD5__LD5			= IOMUX_PAD(0x2d4, 0x0dc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD5__GPIO_1_19			= IOMUX_PAD(0x2d4, 0x0dc, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD6__LD6			= IOMUX_PAD(0x2d8, 0x0e0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD6__GPIO_1_20			= IOMUX_PAD(0x2d8, 0x0e0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD7__LD7			= IOMUX_PAD(0x2dc, 0x0e4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD7__GPIO_1_21			= IOMUX_PAD(0x2dc, 0x0e4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD8__LD8			= IOMUX_PAD(0x2e0, 0x0e8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD8__FEC_TX_ERR		= IOMUX_PAD(0x2e0, 0x0e8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD9__LD9			= IOMUX_PAD(0x2e4, 0x0ec, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD9__FEC_COL			= IOMUX_PAD(0x2e4, 0x0ec, 0x05, 0x504, 1, NO_PAD_CTRL),
+
+	MX25_PAD_LD10__LD10			= IOMUX_PAD(0x2e8, 0x0f0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD10__FEC_RX_ER		= IOMUX_PAD(0x2e8, 0x0f0, 0x05, 0x518, 1, NO_PAD_CTRL),
+
+	MX25_PAD_LD11__LD11			= IOMUX_PAD(0x2ec, 0x0f4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD11__FEC_RDATA2		= IOMUX_PAD(0x2ec, 0x0f4, 0x05, 0x50c, 1, NO_PAD_CTRL),
+
+	MX25_PAD_LD12__LD12			= IOMUX_PAD(0x2f0, 0x0f8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD12__FEC_RDATA3		= IOMUX_PAD(0x2f0, 0x0f8, 0x05, 0x510, 1, NO_PAD_CTRL),
+
+	MX25_PAD_LD13__LD13			= IOMUX_PAD(0x2f4, 0x0fc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD13__FEC_TDATA2		= IOMUX_PAD(0x2f4, 0x0fc, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD14__LD14			= IOMUX_PAD(0x2f8, 0x100, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD14__FEC_TDATA3		= IOMUX_PAD(0x2f8, 0x100, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LD15__LD15			= IOMUX_PAD(0x2fc, 0x104, 0x00, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_LD15__FEC_RX_CLK		= IOMUX_PAD(0x2fc, 0x104, 0x05, 0x514, 1, NO_PAD_CTRL),
+
+	MX25_PAD_HSYNC__HSYNC			= IOMUX_PAD(0x300, 0x108, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_HSYNC__GPIO_1_22		= IOMUX_PAD(0x300, 0x108, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_VSYNC__VSYNC			= IOMUX_PAD(0x304, 0x10c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_VSYNC__GPIO_1_23		= IOMUX_PAD(0x304, 0x10c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_LSCLK__LSCLK			= IOMUX_PAD(0x308, 0x110, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_LSCLK__GPIO_1_24		= IOMUX_PAD(0x308, 0x110, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_OE_ACD__OE_ACD			= IOMUX_PAD(0x30c, 0x114, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_OE_ACD__GPIO_1_25		= IOMUX_PAD(0x30c, 0x114, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CONTRAST__CONTRAST		= IOMUX_PAD(0x310, 0x118, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CONTRAST__PWM4_PWMO		= IOMUX_PAD(0x310, 0x118, 0x04, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CONTRAST__FEC_CRS		= IOMUX_PAD(0x310, 0x118, 0x05, 0x508, 1, NO_PAD_CTRL),
+
+	MX25_PAD_PWM__PWM			= IOMUX_PAD(0x314, 0x11c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_PWM__GPIO_1_26			= IOMUX_PAD(0x314, 0x11c, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_PWM__USBH2_OC			= IOMUX_PAD(0x314, 0x11c, 0x06, 0x580, 1, PAD_CTL_PUS_100K_UP),
+
+	MX25_PAD_CSI_D2__CSI_D2			= IOMUX_PAD(0x318, 0x120, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D2__UART5_RXD_MUX		= IOMUX_PAD(0x318, 0x120, 0x01, 0x578, 1, NO_PAD_CTRL),
+	MX25_PAD_CSI_D2__GPIO_1_27		= IOMUX_PAD(0x318, 0x120, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D2__CSPI3_MOSI		= IOMUX_PAD(0x318, 0x120, 0x07, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_D3__CSI_D3			= IOMUX_PAD(0x31c, 0x124, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D3__GPIO_1_28		= IOMUX_PAD(0x31c, 0x124, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D3__CSPI3_MISO		= IOMUX_PAD(0x31c, 0x124, 0x07, 0x4b4, 1, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_D4__CSI_D4			= IOMUX_PAD(0x320, 0x128, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D4__UART5_RTS		= IOMUX_PAD(0x320, 0x128, 0x01, 0x574, 1, NO_PAD_CTRL),
+	MX25_PAD_CSI_D4__GPIO_1_29		= IOMUX_PAD(0x320, 0x128, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D4__CSPI3_SCLK		= IOMUX_PAD(0x320, 0x128, 0x07, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_D5__CSI_D5			= IOMUX_PAD(0x324, 0x12c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D5__GPIO_1_30		= IOMUX_PAD(0x324, 0x12c, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D5__CSPI3_RDY		= IOMUX_PAD(0x324, 0x12c, 0x07, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_D6__CSI_D6			= IOMUX_PAD(0x328, 0x130, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D6__GPIO_1_31		= IOMUX_PAD(0x328, 0x130, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_D7__CSI_D7			= IOMUX_PAD(0x32c, 0x134, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D7__GPIO_1_6		= IOMUX_PAD(0x32c, 0x134, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_D8__CSI_D8			= IOMUX_PAD(0x330, 0x138, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D8__GPIO_1_7		= IOMUX_PAD(0x330, 0x138, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_D9__CSI_D9			= IOMUX_PAD(0x334, 0x13c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_D9__GPIO_4_21		= IOMUX_PAD(0x334, 0x13c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_MCLK__CSI_MCLK		= IOMUX_PAD(0x338, 0x140, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_MCLK__GPIO_1_8		= IOMUX_PAD(0x338, 0x140, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_VSYNC__CSI_VSYNC		= IOMUX_PAD(0x33c, 0x144, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_VSYNC__GPIO_1_9		= IOMUX_PAD(0x33c, 0x144, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_HSYNC__CSI_HSYNC		= IOMUX_PAD(0x340, 0x148, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_HSYNC__GPIO_1_10		= IOMUX_PAD(0x340, 0x148, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		= IOMUX_PAD(0x344, 0x14c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSI_PIXCLK__GPIO_1_11		= IOMUX_PAD(0x344, 0x14c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_I2C1_CLK__I2C1_CLK		= IOMUX_PAD(0x348, 0x150, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_I2C1_CLK__GPIO_1_12		= IOMUX_PAD(0x348, 0x150, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_I2C1_DAT__I2C1_DAT		= IOMUX_PAD(0x34c, 0x154, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_I2C1_DAT__GPIO_1_13		= IOMUX_PAD(0x34c, 0x154, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		= IOMUX_PAD(0x350, 0x158, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSPI1_MOSI__GPIO_1_14		= IOMUX_PAD(0x350, 0x158, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSPI1_MISO__CSPI1_MISO		= IOMUX_PAD(0x354, 0x15c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSPI1_MISO__GPIO_1_15		= IOMUX_PAD(0x354, 0x15c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSPI1_SS0__CSPI1_SS0		= IOMUX_PAD(0x358, 0x160, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSPI1_SS0__GPIO_1_16		= IOMUX_PAD(0x358, 0x160, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSPI1_SS1__CSPI1_SS1		= IOMUX_PAD(0x35c, 0x164, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSPI1_SS1__I2C3_DAT		= IOMUX_PAD(0x35c, 0x164, 0x01, 0x528, 1, NO_PAD_CTRL),
+	MX25_PAD_CSPI1_SS1__GPIO_1_17		= IOMUX_PAD(0x35c, 0x164, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		= IOMUX_PAD(0x360, 0x168, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CSPI1_SCLK__GPIO_1_18		= IOMUX_PAD(0x360, 0x168, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CSPI1_RDY__CSPI1_RDY		= IOMUX_PAD(0x364, 0x16c, 0x00, 0, 0, PAD_CTL_PKE),
+	MX25_PAD_CSPI1_RDY__GPIO_2_22		= IOMUX_PAD(0x364, 0x16c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UART1_RXD__UART1_RXD		= IOMUX_PAD(0x368, 0x170, 0x00, 0, 0, PAD_CTL_PUS_100K_DOWN),
+	MX25_PAD_UART1_RXD__GPIO_4_22		= IOMUX_PAD(0x368, 0x170, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UART1_TXD__UART1_TXD		= IOMUX_PAD(0x36c, 0x174, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_UART1_TXD__GPIO_4_23		= IOMUX_PAD(0x36c, 0x174, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UART1_RTS__UART1_RTS		= IOMUX_PAD(0x370, 0x178, 0x00, 0, 0, PAD_CTL_PUS_100K_UP),
+	MX25_PAD_UART1_RTS__CSI_D0		= IOMUX_PAD(0x370, 0x178, 0x01, 0x488, 1, NO_PAD_CTRL),
+	MX25_PAD_UART1_RTS__GPIO_4_24		= IOMUX_PAD(0x370, 0x178, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UART1_CTS__UART1_CTS		= IOMUX_PAD(0x374, 0x17c, 0x00, 0, 0, PAD_CTL_PUS_100K_UP),
+	MX25_PAD_UART1_CTS__CSI_D1		= IOMUX_PAD(0x374, 0x17c, 0x01, 0x48c, 1, NO_PAD_CTRL),
+	MX25_PAD_UART1_CTS__GPIO_4_25		= IOMUX_PAD(0x374, 0x17c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UART2_RXD__UART2_RXD		= IOMUX_PAD(0x378, 0x180, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_UART2_RXD__GPIO_4_26		= IOMUX_PAD(0x378, 0x180, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UART2_TXD__UART2_TXD		= IOMUX_PAD(0x37c, 0x184, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_UART2_TXD__GPIO_4_27		= IOMUX_PAD(0x37c, 0x184, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UART2_RTS__UART2_RTS		= IOMUX_PAD(0x380, 0x188, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_UART2_RTS__FEC_COL		= IOMUX_PAD(0x380, 0x188, 0x02, 0x504, 2, NO_PAD_CTRL),
+	MX25_PAD_UART2_RTS__GPIO_4_28		= IOMUX_PAD(0x380, 0x188, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UART2_CTS__FEC_RX_ER		= IOMUX_PAD(0x384, 0x18c, 0x02, 0x518, 2, NO_PAD_CTRL),
+	MX25_PAD_UART2_CTS__UART2_CTS		= IOMUX_PAD(0x384, 0x18c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_UART2_CTS__GPIO_4_29		= IOMUX_PAD(0x384, 0x18c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	/*
+	 * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
+	 * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
+	 * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
+	 * bug that configuring the SD1_CMD function doesn't enable the input path for
+	 * this pin.
+	 * This might have side effects for other hardware units that are connected to
+	 * that pin and use the respective function as input.
+	 */
+	MX25_PAD_SD1_CMD__SD1_CMD		= IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
+	MX25_PAD_SD1_CMD__FEC_RDATA2		= IOMUX_PAD(0x388, 0x190, 0x02, 0x50c, 2, NO_PAD_CTRL),
+	MX25_PAD_SD1_CMD__GPIO_2_23		= IOMUX_PAD(0x388, 0x190, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_SD1_CLK__SD1_CLK		= IOMUX_PAD(0x38c, 0x194, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
+	MX25_PAD_SD1_CLK__FEC_RDATA3		= IOMUX_PAD(0x38c, 0x194, 0x02, 0x510, 2, NO_PAD_CTRL),
+	MX25_PAD_SD1_CLK__GPIO_2_24		= IOMUX_PAD(0x38c, 0x194, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_SD1_DATA0__SD1_DATA0		= IOMUX_PAD(0x390, 0x198, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
+	MX25_PAD_SD1_DATA0__GPIO_2_25		= IOMUX_PAD(0x390, 0x198, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_SD1_DATA1__SD1_DATA1		= IOMUX_PAD(0x394, 0x19c, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
+	MX25_PAD_SD1_DATA1__AUD7_RXD		= IOMUX_PAD(0x394, 0x19c, 0x03, 0x478, 0, NO_PAD_CTRL),
+	MX25_PAD_SD1_DATA1__GPIO_2_26		= IOMUX_PAD(0x394, 0x19c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_SD1_DATA2__SD1_DATA2		= IOMUX_PAD(0x398, 0x1a0, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
+	MX25_PAD_SD1_DATA2__FEC_RX_CLK		= IOMUX_PAD(0x398, 0x1a0, 0x05, 0x514, 2, NO_PAD_CTRL),
+	MX25_PAD_SD1_DATA2__GPIO_2_27		= IOMUX_PAD(0x398, 0x1a0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_SD1_DATA3__SD1_DATA3		= IOMUX_PAD(0x39c, 0x1a4, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
+	MX25_PAD_SD1_DATA3__FEC_CRS		= IOMUX_PAD(0x39c, 0x1a4, 0x00, 0x508, 2, NO_PAD_CTRL),
+	MX25_PAD_SD1_DATA3__GPIO_2_28		= IOMUX_PAD(0x39c, 0x1a4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_KPP_ROW0__KPP_ROW0		= IOMUX_PAD(0x3a0, 0x1a8, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
+	MX25_PAD_KPP_ROW0__GPIO_2_29		= IOMUX_PAD(0x3a0, 0x1a8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_KPP_ROW1__KPP_ROW1		= IOMUX_PAD(0x3a4, 0x1ac, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
+	MX25_PAD_KPP_ROW1__GPIO_2_30		= IOMUX_PAD(0x3a4, 0x1ac, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_KPP_ROW2__KPP_ROW2		= IOMUX_PAD(0x3a8, 0x1b0, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
+	MX25_PAD_KPP_ROW2__CSI_D0		= IOMUX_PAD(0x3a8, 0x1b0, 0x03, 0x488, 2, NO_PAD_CTRL),
+	MX25_PAD_KPP_ROW2__GPIO_2_31		= IOMUX_PAD(0x3a8, 0x1b0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_KPP_ROW3__KPP_ROW3		= IOMUX_PAD(0x3ac, 0x1b4, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
+	MX25_PAD_KPP_ROW3__CSI_LD1		= IOMUX_PAD(0x3ac, 0x1b4, 0x03, 0x48c, 2, NO_PAD_CTRL),
+	MX25_PAD_KPP_ROW3__GPIO_3_0		= IOMUX_PAD(0x3ac, 0x1b4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_KPP_COL0__KPP_COL0		= IOMUX_PAD(0x3b0, 0x1b8, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
+	MX25_PAD_KPP_COL0__UART4_RXD_MUX	= IOMUX_PAD(0x3b0, 0x1b8, 0x01, 0x570, 1, NO_PAD_CTRL),
+	MX25_PAD_KPP_COL0__AUD5_TXD		= IOMUX_PAD(0x3b0, 0x1b8, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
+	MX25_PAD_KPP_COL0__GPIO_3_1		= IOMUX_PAD(0x3b0, 0x1b8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_KPP_COL1__KPP_COL1		= IOMUX_PAD(0x3b4, 0x1bc, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
+	MX25_PAD_KPP_COL1__UART4_TXD_MUX	= IOMUX_PAD(0x3b4, 0x1bc, 0x01, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_KPP_COL1__AUD5_RXD		= IOMUX_PAD(0x3b4, 0x1bc, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
+	MX25_PAD_KPP_COL1__GPIO_3_2		= IOMUX_PAD(0x3b4, 0x1bc, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_KPP_COL2__KPP_COL2		= IOMUX_PAD(0x3b8, 0x1c0, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
+	MX25_PAD_KPP_COL2__UART4_RTS		= IOMUX_PAD(0x3b8, 0x1c0, 0x01, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_KPP_COL2__AUD5_TXC		= IOMUX_PAD(0x3b8, 0x1c0, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
+	MX25_PAD_KPP_COL2__GPIO_3_3		= IOMUX_PAD(0x3b8, 0x1c0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_KPP_COL3__KPP_COL3		= IOMUX_PAD(0x3bc, 0x1c4, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
+	MX25_PAD_KPP_COL3__UART4_CTS		= IOMUX_PAD(0x3bc, 0x1c4, 0x01, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_KPP_COL3__AUD5_TXFS		= IOMUX_PAD(0x3bc, 0x1c4, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
+	MX25_PAD_KPP_COL3__GPIO_3_4		= IOMUX_PAD(0x3bc, 0x1c4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_MDC__FEC_MDC		= IOMUX_PAD(0x3c0, 0x1c8, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_FEC_MDC__AUD4_TXD		= IOMUX_PAD(0x3c0, 0x1c8, 0x02, 0x464, 1, NO_PAD_CTRL),
+	MX25_PAD_FEC_MDC__GPIO_3_5		= IOMUX_PAD(0x3c0, 0x1c8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_MDIO__FEC_MDIO		= IOMUX_PAD(0x3c4, 0x1cc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP),
+	MX25_PAD_FEC_MDIO__AUD4_RXD		= IOMUX_PAD(0x3c4, 0x1cc, 0x02, 0x460, 1, NO_PAD_CTRL),
+	MX25_PAD_FEC_MDIO__GPIO_3_6		= IOMUX_PAD(0x3c4, 0x1cc, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0		= IOMUX_PAD(0x3c8, 0x1d0, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_FEC_TDATA0__GPIO_3_7		= IOMUX_PAD(0x3c8, 0x1d0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1		= IOMUX_PAD(0x3cc, 0x1d4, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_FEC_TDATA1__AUD4_TXFS		= IOMUX_PAD(0x3cc, 0x1d4, 0x02, 0x474, 1, NO_PAD_CTRL),
+	MX25_PAD_FEC_TDATA1__GPIO_3_8		= IOMUX_PAD(0x3cc, 0x1d4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN		= IOMUX_PAD(0x3d0, 0x1d8, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_FEC_TX_EN__GPIO_3_9		= IOMUX_PAD(0x3d0, 0x1d8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0		= IOMUX_PAD(0x3d4, 0x1dc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+	MX25_PAD_FEC_RDATA0__GPIO_3_10		= IOMUX_PAD(0x3d4, 0x1dc, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1		= IOMUX_PAD(0x3d8, 0x1e0, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+	MX25_PAD_FEC_RDATA1__GPIO_3_11		= IOMUX_PAD(0x3d8, 0x1e0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV		= IOMUX_PAD(0x3dc, 0x1e4, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+	MX25_PAD_FEC_RX_DV__CAN2_RX		= IOMUX_PAD(0x3dc, 0x1e4, 0x04, 0x484, 0, PAD_CTL_PUS_22K_UP),
+	MX25_PAD_FEC_RX_DV__GPIO_3_12		= IOMUX_PAD(0x3dc, 0x1e4, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		= IOMUX_PAD(0x3e0, 0x1e8, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
+	MX25_PAD_FEC_TX_CLK__GPIO_3_13		= IOMUX_PAD(0x3e0, 0x1e8, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_RTCK__RTCK			= IOMUX_PAD(0x3e4, 0x1ec, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_RTCK__OWIRE			= IOMUX_PAD(0x3e4, 0x1ec, 0x01, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_RTCK__GPIO_3_14		= IOMUX_PAD(0x3e4, 0x1ec, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_DE_B__DE_B			= IOMUX_PAD(0x3ec, 0x1f0, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_DE_B__GPIO_2_20		= IOMUX_PAD(0x3ec, 0x1f0, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_TDO__TDO			= IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_GPIO_A__GPIO_A			= IOMUX_PAD(0x3f0, 0x1f4, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_GPIO_A__CAN1_TX		= IOMUX_PAD(0x3f0, 0x1f4, 0x06, 0, 0, PAD_CTL_PUS_22K_UP),
+	MX25_PAD_GPIO_A__USBOTG_PWR		= IOMUX_PAD(0x3f0, 0x1f4, 0x02, 0, 0, PAD_CTL_PKE),
+
+	MX25_PAD_GPIO_B__GPIO_B			= IOMUX_PAD(0x3f4, 0x1f8, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_GPIO_B__CAN1_RX		= IOMUX_PAD(0x3f4, 0x1f8, 0x06, 0x480, 1, PAD_CTL_PUS_22K_UP),
+	MX25_PAD_GPIO_B__USBOTG_OC		= IOMUX_PAD(0x3f4, 0x1f8, 0x02, 0x57c, 1, PAD_CTL_PUS_100K_UP),
+
+	MX25_PAD_GPIO_C__GPIO_C			= IOMUX_PAD(0x3f8, 0x1fc, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_GPIO_C__CAN2_TX		= IOMUX_PAD(0x3f8, 0x1fc, 0x06, 0, 0, PAD_CTL_PUS_22K_UP),
+
+	MX25_PAD_GPIO_D__GPIO_D			= IOMUX_PAD(0x3fc, 0x200, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_GPIO_E__LD16			= IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_GPIO_D__CAN2_RX		= IOMUX_PAD(0x3fc, 0x200, 0x06, 0x484, 1, PAD_CTL_PUS_22K_UP),
+
+	MX25_PAD_GPIO_E__GPIO_E			= IOMUX_PAD(0x400, 0x204, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_GPIO_F__LD17			= IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST),
+	MX25_PAD_GPIO_E__I2C3_CLK		= IOMUX_PAD(0x400, 0x204, 0x01, 0x524, 2, NO_PAD_CTRL),
+	MX25_PAD_GPIO_E__AUD7_TXD		= IOMUX_PAD(0x400, 0x204, 0x04, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_GPIO_F__GPIO_F			= IOMUX_PAD(0x404, 0x208, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_GPIO_F__AUD7_TXC		= IOMUX_PAD(0x404, 0x208, 0x04, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		= IOMUX_PAD(0x000, 0x20c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_EXT_ARMCLK__GPIO_3_15		= IOMUX_PAD(0x000, 0x20c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	= IOMUX_PAD(0x000, 0x210, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_UPLL_BYPCLK__GPIO_3_16		= IOMUX_PAD(0x000, 0x210, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_VSTBY_REQ__VSTBY_REQ		= IOMUX_PAD(0x408, 0x214, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_VSTBY_REQ__AUD7_TXFS		= IOMUX_PAD(0x408, 0x214, 0x04, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_VSTBY_REQ__GPIO_3_17		= IOMUX_PAD(0x408, 0x214, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_VSTBY_ACK__VSTBY_ACK		= IOMUX_PAD(0x40c, 0x218, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_VSTBY_ACK__GPIO_3_18		= IOMUX_PAD(0x40c, 0x218, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_POWER_FAIL__POWER_FAIL		= IOMUX_PAD(0x410, 0x21c, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_POWER_FAIL__AUD7_RXD		= IOMUX_PAD(0x410, 0x21c, 0x04, 0x478, 1, NO_PAD_CTRL),
+	MX25_PAD_POWER_FAIL__GPIO_3_19		= IOMUX_PAD(0x410, 0x21c, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CLKO__CLKO			= IOMUX_PAD(0x414, 0x220, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CLKO__GPIO_2_21		= IOMUX_PAD(0x414, 0x220, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_BOOT_MODE0__BOOT_MODE0		= IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_BOOT_MODE0__GPIO_4_30		= IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_BOOT_MODE1__BOOT_MODE1		= IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_BOOT_MODE1__GPIO_4_31		= IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL),
+
+	MX25_PAD_CTL_GRP_DVS_MISC		= IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_FEC		= IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DVS_JTAG		= IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_NFC		= IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_CSI		= IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_WEIM		= IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_DDR		= IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DVS_CRM		= IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_KPP		= IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_SDHC1		= IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_LCD		= IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_UART		= IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DVS_NFC		= IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DVS_CSI		= IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DSE_CSPI1		= IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DDRTYPE		= IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DVS_SDHC1		= IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL),
+	MX25_PAD_CTL_GRP_DVS_LCD		= IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL),
+};
+
+#endif /* __IOMUX_MX25_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx25/macro.h b/roms/u-boot/arch/arm/include/asm/arch-mx25/macro.h
new file mode 100644
index 000000000..68bddf495
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx25/macro.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * (C) Copyright 2009 DENX Software Engineering
+ * Author: John Rigby <jrigby@gmail.com>
+ *
+ * Common asm macros for imx25
+ */
+
+#ifndef __ASM_ARM_ARCH_MACRO_H__
+#define __ASM_ARM_ARCH_MACRO_H__
+#ifdef __ASSEMBLY__
+
+#include <asm/arch/imx-regs.h>
+#include <generated/asm-offsets.h>
+#include <asm/macro.h>
+
+/*
+ * AIPS setup - Only setup MPROTx registers.
+ * The PACR default values are good.
+ *
+ * Default argument values:
+ *  - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to
+ *    user-mode.
+ */
+.macro init_aips mpr=0x77777777
+	ldr	r0, =IMX_AIPS1_BASE
+	ldr	r1, =\mpr
+	str	r1, [r0, #AIPS_MPR_0_7]
+	str	r1, [r0, #AIPS_MPR_8_15]
+	ldr	r2, =IMX_AIPS2_BASE
+	str	r1, [r2, #AIPS_MPR_0_7]
+	str	r1, [r2, #AIPS_MPR_8_15]
+.endm
+
+/*
+ * MAX (Multi-Layer AHB Crossbar Switch) setup
+ *
+ * Default argument values:
+ *  - MPR: priority is IAHB > DAHB > USBOTG > RTIC > eSDHC2/SDMA
+ *  - SGPCR: always park on last master
+ *  - MGPCR: restore default values
+ */
+.macro init_max mpr=0x00043210, sgpcr=0x00000010, mgpcr=0x00000000
+	ldr	r0, =IMX_MAX_BASE
+	ldr	r1, =\mpr
+	str	r1, [r0, #MAX_MPR0]	/* for S0 */
+	str	r1, [r0, #MAX_MPR1]	/* for S1 */
+	str	r1, [r0, #MAX_MPR2]	/* for S2 */
+	str	r1, [r0, #MAX_MPR3]	/* for S3 */
+	str	r1, [r0, #MAX_MPR4]	/* for S4 */
+	ldr	r1, =\sgpcr
+	str	r1, [r0, #MAX_SGPCR0]	/* for S0 */
+	str	r1, [r0, #MAX_SGPCR1]	/* for S1 */
+	str	r1, [r0, #MAX_SGPCR2]	/* for S2 */
+	str	r1, [r0, #MAX_SGPCR3]	/* for S3 */
+	str	r1, [r0, #MAX_SGPCR4]	/* for S4 */
+	ldr	r1, =\mgpcr
+	str	r1, [r0, #MAX_MGPCR0]	/* for M0 */
+	str	r1, [r0, #MAX_MGPCR1]	/* for M1 */
+	str	r1, [r0, #MAX_MGPCR2]	/* for M2 */
+	str	r1, [r0, #MAX_MGPCR3]	/* for M3 */
+	str	r1, [r0, #MAX_MGPCR4]	/* for M4 */
+.endm
+
+/*
+ * M3IF setup
+ *
+ * Default argument values:
+ *  - CTL:
+ * MRRP[0] = LCDC on priority list (1 << 0)			= 0x00000001
+ * MRRP[1] = MAX1 not on priority list (0 << 1)			= 0x00000000
+ * MRRP[2] = MAX0 not on priority list (0 << 2)			= 0x00000000
+ * MRRP[3] = USBH not on priority list (0 << 3)			= 0x00000000
+ * MRRP[4] = SDMA not on priority list (0 << 4)			= 0x00000000
+ * MRRP[5] = eSDHC1/ATA/FEC not on priority list (0 << 5)	= 0x00000000
+ * MRRP[6] = LCDC/SLCDC/MAX2 not on priority list (0 << 6)	= 0x00000000
+ * MRRP[7] = CSI not on priority list (0 << 7)			= 0x00000000
+ *								------------
+ *								  0x00000001
+ */
+.macro init_m3if ctl=0x00000001
+	/* M3IF Control Register (M3IFCTL) */
+	write32	IMX_M3IF_CTRL_BASE, \ctl
+.endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARM_ARCH_MACRO_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx27/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mx27/clock.h
new file mode 100644
index 000000000..ab96431cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx27/clock.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *
+ * (c) 2009 Ilya Yanok, Emcraft Systems <yanok@emcraft.com>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+enum mxc_clock {
+	MXC_ARM_CLK,
+	MXC_I2C_CLK,
+	MXC_UART_CLK,
+	MXC_ESDHC_CLK,
+	MXC_FEC_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+#define imx_get_uartclk() mxc_get_clock(MXC_UART_CLK)
+#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK)
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx27/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mx27/gpio.h
new file mode 100644
index 000000000..9f342eb7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx27/gpio.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012
+ * Philippe Reynes <tremyfr@yahoo.fr>
+ */
+
+
+#ifndef __ASM_ARCH_MX27_GPIO_H
+#define __ASM_ARCH_MX27_GPIO_H
+
+/* GPIO registers */
+struct gpio_regs {
+	u32 gpio_dir; /* DDIR */
+	u32 ocr1;
+	u32 ocr2;
+	u32 iconfa1;
+	u32 iconfa2;
+	u32 iconfb1;
+	u32 iconfb2;
+	u32 gpio_dr; /* DR */
+	u32 gius;
+	u32 gpio_psr; /* SSR */
+	u32 icr1;
+	u32 icr2;
+	u32 imr;
+	u32 isr;
+	u32 gpr;
+	u32 swr;
+	u32 puen;
+	u32 res[0x2f];
+};
+
+/* This structure is used by the function imx_gpio_mode */
+struct gpio_port_regs {
+	struct gpio_regs port[6];
+};
+
+/*
+ *  GPIO Module and I/O Multiplexer
+ */
+#define PORTA 0
+#define PORTB 1
+#define PORTC 2
+#define PORTD 3
+#define PORTE 4
+#define PORTF 5
+
+#define GPIO_PIN_MASK		0x1f
+#define GPIO_PORT_SHIFT		5
+#define GPIO_PORT_MASK		(0x7 << GPIO_PORT_SHIFT)
+#define GPIO_PORTA		(PORTA << GPIO_PORT_SHIFT)
+#define GPIO_PORTB		(PORTB << GPIO_PORT_SHIFT)
+#define GPIO_PORTC		(PORTC << GPIO_PORT_SHIFT)
+#define GPIO_PORTD		(PORTD << GPIO_PORT_SHIFT)
+#define GPIO_PORTE		(PORTE << GPIO_PORT_SHIFT)
+#define GPIO_PORTF		(PORTF << GPIO_PORT_SHIFT)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx27/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx27/imx-regs.h
new file mode 100644
index 000000000..d39f6b035
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -0,0 +1,480 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ * (c) 2009 Ilya Yanok, Emcraft Systems <yanok@emcraft.com>
+ */
+
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+
+#include <asm/arch/regs-rtc.h>
+
+#ifndef __ASSEMBLY__
+
+extern void imx_gpio_mode (int gpio_mode);
+
+#ifdef CONFIG_MXC_UART
+extern void mx27_uart1_init_pins(void);
+#endif /* CONFIG_MXC_UART */
+
+#ifdef CONFIG_FEC_MXC
+extern void mx27_fec_init_pins(void);
+#endif /* CONFIG_FEC_MXC */
+
+#ifdef CONFIG_MMC_MXC
+extern void mx27_sd1_init_pins(void);
+extern void mx27_sd2_init_pins(void);
+#endif /* CONFIG_MMC_MXC */
+
+/* AIPI */
+struct aipi_regs {
+	u32 psr0;
+	u32 psr1;
+};
+
+/* System Control */
+struct system_control_regs {
+	u32 res[5];
+	u32 fmcr;
+	u32 gpcr;
+	u32 wbcr;
+	u32 dscr1;
+	u32 dscr2;
+	u32 dscr3;
+	u32 dscr4;
+	u32 dscr5;
+	u32 dscr6;
+	u32 dscr7;
+	u32 dscr8;
+	u32 dscr9;
+	u32 dscr10;
+	u32 dscr11;
+	u32 dscr12;
+	u32 dscr13;
+	u32 pscr;
+	u32 pmcr;
+	u32 res1;
+	u32 dcvr0;
+	u32 dcvr1;
+	u32 dcvr2;
+	u32 dcvr3;
+};
+
+/* Chip Select Registers */
+struct weim_regs {
+	u32 cs0u;	/* Chip Select 0 Upper Register */
+	u32 cs0l;	/* Chip Select 0 Lower Register */
+	u32 cs0a;	/* Chip Select 0 Addition Register */
+	u32 pad0;
+	u32 cs1u;	/* Chip Select 1 Upper Register */
+	u32 cs1l;	/* Chip Select 1 Lower Register */
+	u32 cs1a;	/* Chip Select 1 Addition Register */
+	u32 pad1;
+	u32 cs2u;	/* Chip Select 2 Upper Register */
+	u32 cs2l;	/* Chip Select 2 Lower Register */
+	u32 cs2a;	/* Chip Select 2 Addition Register */
+	u32 pad2;
+	u32 cs3u;	/* Chip Select 3 Upper Register */
+	u32 cs3l;	/* Chip Select 3 Lower Register */
+	u32 cs3a;	/* Chip Select 3 Addition Register */
+	u32 pad3;
+	u32 cs4u;	/* Chip Select 4 Upper Register */
+	u32 cs4l;	/* Chip Select 4 Lower Register */
+	u32 cs4a;	/* Chip Select 4 Addition Register */
+	u32 pad4;
+	u32 cs5u;	/* Chip Select 5 Upper Register */
+	u32 cs5l;	/* Chip Select 5 Lower Register */
+	u32 cs5a;	/* Chip Select 5 Addition Register */
+	u32 pad5;
+	u32 eim;	/* WEIM Configuration Register */
+};
+
+/* SDRAM Controller registers */
+struct esdramc_regs {
+/* Enhanced SDRAM Control Register 0 */
+	u32 esdctl0;
+/* Enhanced SDRAM Configuration Register 0 */
+	u32 esdcfg0;
+/* Enhanced SDRAM Control Register 1 */
+	u32 esdctl1;
+/* Enhanced SDRAM Configuration Register 1 */
+	u32 esdcfg1;
+/* Enhanced SDRAM Miscellanious Register */
+	u32 esdmisc;
+};
+
+/* Watchdog Registers*/
+struct wdog_regs {
+	u16 wcr;
+	u16 wsr;
+	u16 wstr;
+};
+
+/* PLL registers */
+struct pll_regs {
+	u32 cscr;	/* Clock Source Control Register */
+	u32 mpctl0;	/* MCU PLL Control Register 0 */
+	u32 mpctl1;	/* MCU PLL Control Register 1 */
+	u32 spctl0;	/* System PLL Control Register 0 */
+	u32 spctl1;	/* System PLL Control Register 1 */
+	u32 osc26mctl;	/* Oscillator 26M Register */
+	u32 pcdr0;	/* Peripheral Clock Divider Register 0 */
+	u32 pcdr1;	/* Peripheral Clock Divider Register 1 */
+	u32 pccr0;	/* Peripheral Clock Control Register 0 */
+	u32 pccr1;	/* Peripheral Clock Control Register 1 */
+	u32 ccsr;	/* Clock Control Status Register */
+};
+
+/*
+ * Definitions for the clocksource registers
+ */
+struct gpt_regs {
+	u32 gpt_tctl;
+	u32 gpt_tprer;
+	u32 gpt_tcmp;
+	u32 gpt_tcr;
+	u32 gpt_tcn;
+	u32 gpt_tstat;
+};
+
+/* IIM Control Registers */
+struct iim_regs {
+	u32 iim_stat;
+	u32 iim_statm;
+	u32 iim_err;
+	u32 iim_emask;
+	u32 iim_fctl;
+	u32 iim_ua;
+	u32 iim_la;
+	u32 iim_sdat;
+	u32 iim_prev;
+	u32 iim_srev;
+	u32 iim_prg_p;
+	u32 iim_scs0;
+	u32 iim_scs1;
+	u32 iim_scs2;
+	u32 iim_scs3;
+	u32 res[0x1f1];
+	struct fuse_bank {
+		u32 fuse_regs[0x20];
+		u32 fuse_rsvd[0xe0];
+	} bank[2];
+};
+
+struct fuse_bank0_regs {
+	u32 fuse0_3[5];
+	u32 mac_addr[6];
+	u32 fuse10_31[0x16];
+};
+
+#endif
+
+#define ARCH_MXC
+
+#define IMX_IO_BASE		0x10000000
+
+#define IMX_AIPI1_BASE		(0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE		(0x02000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE		(0x03000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE		(0x04000 + IMX_IO_BASE)
+#define IMX_TIM3_BASE		(0x05000 + IMX_IO_BASE)
+#define IMX_RTC_BASE		(0x07000 + IMX_IO_BASE)
+#define UART1_BASE		(0x0a000 + IMX_IO_BASE)
+#define UART2_BASE		(0x0b000 + IMX_IO_BASE)
+#define UART3_BASE		(0x0c000 + IMX_IO_BASE)
+#define UART4_BASE		(0x0d000 + IMX_IO_BASE)
+#define I2C1_BASE_ADDR		(0x12000 + IMX_IO_BASE)
+#define IMX_GPIO_BASE		(0x15000 + IMX_IO_BASE)
+#define IMX_TIM4_BASE		(0x19000 + IMX_IO_BASE)
+#define IMX_TIM5_BASE		(0x1a000 + IMX_IO_BASE)
+#define IMX_UART5_BASE		(0x1b000 + IMX_IO_BASE)
+#define IMX_UART6_BASE		(0x1c000 + IMX_IO_BASE)
+#define I2C2_BASE_ADDR		(0x1D000 + IMX_IO_BASE)
+#define IMX_TIM6_BASE		(0x1f000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE		(0x20000 + IMX_IO_BASE)
+#define IMX_PLL_BASE		(0x27000 + IMX_IO_BASE)
+#define IMX_SYSTEM_CTL_BASE	(0x27800 + IMX_IO_BASE)
+#define IMX_IIM_BASE		(0x28000 + IMX_IO_BASE)
+#define IIM_BASE_ADDR		IMX_IIM_BASE
+#define IMX_FEC_BASE		(0x2b000 + IMX_IO_BASE)
+
+#define IMX_NFC_BASE		(0xD8000000)
+#define IMX_ESD_BASE		(0xD8001000)
+#define IMX_WEIM_BASE		(0xD8002000)
+
+#define NFC_BASE_ADDR		IMX_NFC_BASE
+
+
+/* FMCR System Control bit definition*/
+#define UART4_RXD_CTL	(1 << 25)
+#define UART4_RTS_CTL	(1 << 24)
+#define KP_COL6_CTL	(1 << 18)
+#define KP_ROW7_CTL	(1 << 17)
+#define KP_ROW6_CTL	(1 << 16)
+#define PC_WAIT_B_CTL	(1 << 14)
+#define PC_READY_CTL	(1 << 13)
+#define PC_VS1_CTL	(1 << 12)
+#define PC_VS2_CTL	(1 << 11)
+#define PC_BVD1_CTL	(1 << 10)
+#define PC_BVD2_CTL	(1 << 9)
+#define IOS16_CTL	(1 << 8)
+#define NF_FMS		(1 << 5)
+#define NF_16BIT_SEL	(1 << 4)
+#define SLCDC_SEL	(1 << 2)
+#define SDCS1_SEL	(1 << 1)
+#define SDCS0_SEL	(1 << 0)
+
+
+/* important definition of some bits of WCR */
+#define WCR_WDE 0x04
+
+#define CSCR_MPEN		(1 << 0)
+#define CSCR_SPEN		(1 << 1)
+#define CSCR_FPM_EN		(1 << 2)
+#define CSCR_OSC26M_DIS		(1 << 3)
+#define CSCR_OSC26M_DIV1P5	(1 << 4)
+#define CSCR_AHB_DIV
+#define CSCR_ARM_DIV
+#define CSCR_ARM_SRC_MPLL	(1 << 15)
+#define CSCR_MCU_SEL		(1 << 16)
+#define CSCR_SP_SEL		(1 << 17)
+#define CSCR_MPLL_RESTART	(1 << 18)
+#define CSCR_SPLL_RESTART	(1 << 19)
+#define CSCR_MSHC_SEL		(1 << 20)
+#define CSCR_H264_SEL		(1 << 21)
+#define CSCR_SSI1_SEL		(1 << 22)
+#define CSCR_SSI2_SEL		(1 << 23)
+#define CSCR_SD_CNT
+#define CSCR_USB_DIV
+#define CSCR_UPDATE_DIS		(1 << 31)
+
+#define MPCTL1_BRMO		(1 << 6)
+#define MPCTL1_LF		(1 << 15)
+
+#define PCCR0_SSI2_EN	(1 << 0)
+#define PCCR0_SSI1_EN	(1 << 1)
+#define PCCR0_SLCDC_EN	(1 << 2)
+#define PCCR0_SDHC3_EN	(1 << 3)
+#define PCCR0_SDHC2_EN	(1 << 4)
+#define PCCR0_SDHC1_EN	(1 << 5)
+#define PCCR0_SDC_EN	(1 << 6)
+#define PCCR0_SAHARA_EN	(1 << 7)
+#define PCCR0_RTIC_EN	(1 << 8)
+#define PCCR0_RTC_EN	(1 << 9)
+#define PCCR0_PWM_EN	(1 << 11)
+#define PCCR0_OWIRE_EN	(1 << 12)
+#define PCCR0_MSHC_EN	(1 << 13)
+#define PCCR0_LCDC_EN	(1 << 14)
+#define PCCR0_KPP_EN	(1 << 15)
+#define PCCR0_IIM_EN	(1 << 16)
+#define PCCR0_I2C2_EN	(1 << 17)
+#define PCCR0_I2C1_EN	(1 << 18)
+#define PCCR0_GPT6_EN	(1 << 19)
+#define PCCR0_GPT5_EN	(1 << 20)
+#define PCCR0_GPT4_EN	(1 << 21)
+#define PCCR0_GPT3_EN	(1 << 22)
+#define PCCR0_GPT2_EN	(1 << 23)
+#define PCCR0_GPT1_EN	(1 << 24)
+#define PCCR0_GPIO_EN	(1 << 25)
+#define PCCR0_FEC_EN	(1 << 26)
+#define PCCR0_EMMA_EN	(1 << 27)
+#define PCCR0_DMA_EN	(1 << 28)
+#define PCCR0_CSPI3_EN	(1 << 29)
+#define PCCR0_CSPI2_EN	(1 << 30)
+#define PCCR0_CSPI1_EN	(1 << 31)
+
+#define PCCR1_MSHC_BAUDEN	(1 << 2)
+#define PCCR1_NFC_BAUDEN	(1 << 3)
+#define PCCR1_SSI2_BAUDEN	(1 << 4)
+#define PCCR1_SSI1_BAUDEN	(1 << 5)
+#define PCCR1_H264_BAUDEN	(1 << 6)
+#define PCCR1_PERCLK4_EN	(1 << 7)
+#define PCCR1_PERCLK3_EN	(1 << 8)
+#define PCCR1_PERCLK2_EN	(1 << 9)
+#define PCCR1_PERCLK1_EN	(1 << 10)
+#define PCCR1_HCLK_USB		(1 << 11)
+#define PCCR1_HCLK_SLCDC	(1 << 12)
+#define PCCR1_HCLK_SAHARA	(1 << 13)
+#define PCCR1_HCLK_RTIC		(1 << 14)
+#define PCCR1_HCLK_LCDC		(1 << 15)
+#define PCCR1_HCLK_H264		(1 << 16)
+#define PCCR1_HCLK_FEC		(1 << 17)
+#define PCCR1_HCLK_EMMA		(1 << 18)
+#define PCCR1_HCLK_EMI		(1 << 19)
+#define PCCR1_HCLK_DMA		(1 << 20)
+#define PCCR1_HCLK_CSI		(1 << 21)
+#define PCCR1_HCLK_BROM		(1 << 22)
+#define PCCR1_HCLK_ATA		(1 << 23)
+#define PCCR1_WDT_EN		(1 << 24)
+#define PCCR1_USB_EN		(1 << 25)
+#define PCCR1_UART6_EN		(1 << 26)
+#define PCCR1_UART5_EN		(1 << 27)
+#define PCCR1_UART4_EN		(1 << 28)
+#define PCCR1_UART3_EN		(1 << 29)
+#define PCCR1_UART2_EN		(1 << 30)
+#define PCCR1_UART1_EN		(1 << 31)
+
+/* SDRAM Controller registers bitfields */
+#define ESDCTL_PRCT(x)		(((x) & 0x3f) << 0)
+#define ESDCTL_BL		(1 << 7)
+#define ESDCTL_FP		(1 << 8)
+#define ESDCTL_PWDT(x)		(((x) & 3) << 10)
+#define ESDCTL_SREFR(x)		(((x) & 7) << 13)
+#define ESDCTL_DSIZ_16_UPPER	(0 << 16)
+#define ESDCTL_DSIZ_16_LOWER	(1 << 16)
+#define ESDCTL_DSIZ_32		(2 << 16)
+#define ESDCTL_COL8		(0 << 20)
+#define ESDCTL_COL9		(1 << 20)
+#define ESDCTL_COL10		(2 << 20)
+#define ESDCTL_ROW11		(0 << 24)
+#define ESDCTL_ROW12		(1 << 24)
+#define ESDCTL_ROW13		(2 << 24)
+#define ESDCTL_ROW14		(3 << 24)
+#define ESDCTL_ROW15		(4 << 24)
+#define ESDCTL_SP		(1 << 27)
+#define ESDCTL_SMODE_NORMAL	(0 << 28)
+#define ESDCTL_SMODE_PRECHARGE	(1 << 28)
+#define ESDCTL_SMODE_AUTO_REF	(2 << 28)
+#define ESDCTL_SMODE_LOAD_MODE	(3 << 28)
+#define ESDCTL_SMODE_MAN_REF	(4 << 28)
+#define ESDCTL_SDE		(1 << 31)
+
+#define ESDCFG_TRC(x)		(((x) & 0xf) << 0)
+#define ESDCFG_TRCD(x)		(((x) & 0x7) << 4)
+#define ESDCFG_TCAS(x)		(((x) & 0x3) << 8)
+#define ESDCFG_TRRD(x)		(((x) & 0x3) << 10)
+#define ESDCFG_TRAS(x)		(((x) & 0x7) << 12)
+#define ESDCFG_TWR		(1 << 15)
+#define ESDCFG_TMRD(x)		(((x) & 0x3) << 16)
+#define ESDCFG_TRP(x)		(((x) & 0x3) << 18)
+#define ESDCFG_TWTR		(1 << 20)
+#define ESDCFG_TXP(x)		(((x) & 0x3) << 21)
+
+#define ESDMISC_RST		(1 << 1)
+#define ESDMISC_MDDREN		(1 << 2)
+#define ESDMISC_MDDR_DL_RST	(1 << 3)
+#define ESDMISC_MDDR_MDIS	(1 << 4)
+#define ESDMISC_LHD		(1 << 5)
+#define ESDMISC_MA10_SHARE	(1 << 6)
+#define ESDMISC_SDRAM_RDY	(1 << 31)
+
+#define PC5_PF_I2C2_DATA	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 5)
+#define PC6_PF_I2C2_CLK		(GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
+#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
+#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
+#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
+#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
+#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
+
+#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
+#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
+#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
+#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
+#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
+#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
+#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
+#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
+#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
+#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
+#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
+#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
+#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
+#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
+#define PD14_AOUT_FEC_CLR	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
+#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
+#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
+#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+
+#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
+#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
+#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
+#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
+#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
+#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
+#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 7)
+#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
+#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 9)
+#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
+#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 11)
+#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
+#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 13)
+#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
+#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
+#define PE18_PF_SD1_D0		(GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1		(GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2		(GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3		(GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD		(GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK		(GPIO_PORTE | GPIO_PF | 23)
+#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF | 9)
+#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
+#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
+
+/* Clocksource Bitfields */
+#define TCTL_SWR	(1 << 15)	/* Software reset */
+#define TCTL_FRR	(1 << 8)	/* Freerun / restart */
+#define TCTL_CAP	(3 << 6)	/* Capture Edge */
+#define TCTL_OM		(1 << 5)	/* output mode */
+#define TCTL_IRQEN	(1 << 4)	/* interrupt enable */
+#define TCTL_CLKSOURCE	1		/* Clock source bit position */
+#define TCTL_TEN	1		/* Timer enable */
+#define TPRER_PRES	0xff		/* Prescale */
+#define TSTAT_CAPT	(1 << 1)	/* Capture event */
+#define TSTAT_COMP	1		/* Compare event */
+
+#define GPIO1_BASE_ADDR 0x10015000
+#define GPIO2_BASE_ADDR 0x10015100
+#define GPIO3_BASE_ADDR 0x10015200
+#define GPIO4_BASE_ADDR 0x10015300
+#define GPIO5_BASE_ADDR 0x10015400
+#define GPIO6_BASE_ADDR 0x10015500
+
+#define GPIO_OUT	(1 << 8)
+#define GPIO_IN		(0 << 8)
+#define GPIO_PUEN	(1 << 9)
+
+#define GPIO_PF		(1 << 10)
+#define GPIO_AF		(1 << 11)
+
+#define GPIO_OCR_SHIFT	12
+#define GPIO_OCR_MASK	(3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN	(0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN	(1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN	(2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO	(3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT	14
+#define GPIO_AOUT_MASK	(3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT	(0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR	(1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0	(2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1	(3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT	16
+#define GPIO_BOUT_MASK	(3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT	(0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR	(1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0	(2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1	(3 << GPIO_BOUT_SHIFT)
+
+#define IIM_STAT_BUSY	(1 << 7)
+#define IIM_STAT_PRGD	(1 << 1)
+#define IIM_STAT_SNSD	(1 << 0)
+#define IIM_ERR_PRGE	(1 << 7)
+#define IIM_ERR_WPE	(1 << 6)
+#define IIM_ERR_OPE	(1 << 5)
+#define IIM_ERR_RPE	(1 << 4)
+#define IIM_ERR_WLRE	(1 << 3)
+#define IIM_ERR_SNSE	(1 << 2)
+#define IIM_ERR_PARITYE	(1 << 1)
+
+#endif				/* _IMX_REGS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx27/mxcmmc.h b/roms/u-boot/arch/arm/include/asm/arch-mx27/mxcmmc.h
new file mode 100644
index 000000000..52fb0ab57
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx27/mxcmmc.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
+ */
+
+#ifndef ASM_ARCH_MXCMMC_H
+#define ASM_ARCH_MXCMMC_H
+
+int mxc_mmc_init(struct bd_info *bis);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx27/regs-rtc.h b/roms/u-boot/arch/arm/include/asm/arch-mx27/regs-rtc.h
new file mode 100644
index 000000000..8434f4c1c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx27/regs-rtc.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX27 RTC Register Definitions
+ *
+ * Copyright (C) 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ */
+
+#ifndef __MX27_REGS_RTC_H__
+#define __MX27_REGS_RTC_H__
+
+#ifndef	__ASSEMBLY__
+struct rtc_regs {
+	u32 hourmin;
+	u32 seconds;
+	u32 alrm_hm;
+	u32 alrm_sec;
+	u32 rtcctl;
+	u32 rtcisr;
+	u32 rtcienr;
+	u32 stpwch;
+	u32 dayr;
+	u32 dayalarm;
+};
+#endif /* __ASSEMBLY__ */
+
+#endif	/* __MX28_REGS_RTC_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx31/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mx31/clock.h
new file mode 100644
index 000000000..e99e115f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx31/clock.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#define MXC_HCLK	CONFIG_MX31_HCLK_FREQ
+
+#define MXC_CLK32	CONFIG_MX31_CLK32
+
+enum mxc_clock {
+	MXC_ARM_CLK,
+	MXC_IPG_CLK,
+	MXC_IPG_PERCLK,
+	MXC_CSPI_CLK,
+	MXC_UART_CLK,
+	MXC_IPU_CLK,
+	MXC_ESDHC_CLK,
+	MXC_I2C_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+extern u32 imx_get_uartclk(void);
+extern void mx31_gpio_mux(unsigned long mode);
+extern void mx31_set_pad(enum iomux_pins pin, u32 config);
+extern void mx31_set_gpr(enum iomux_gp_func gp, char en);
+
+void mx31_uart1_hw_init(void);
+void mx31_uart2_hw_init(void);
+void mx31_spi2_hw_init(void);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx31/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mx31/gpio.h
new file mode 100644
index 000000000..45e9fc619
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx31/gpio.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ */
+
+
+#ifndef __ASM_ARCH_MX31_GPIO_H
+#define __ASM_ARCH_MX31_GPIO_H
+
+#include <asm/mach-imx/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx31/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx31/imx-regs.h
new file mode 100644
index 000000000..566db549e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -0,0 +1,895 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ */
+
+#ifndef __ASM_ARCH_MX31_IMX_REGS_H
+#define __ASM_ARCH_MX31_IMX_REGS_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+/* Clock control module registers */
+struct clock_control_regs {
+	u32 ccmr;
+	u32 pdr0;
+	u32 pdr1;
+	u32 rcsr;
+	u32 mpctl;
+	u32 upctl;
+	u32 spctl;
+	u32 cosr;
+	u32 cgr0;
+	u32 cgr1;
+	u32 cgr2;
+	u32 wimr0;
+	u32 ldc;
+	u32 dcvr0;
+	u32 dcvr1;
+	u32 dcvr2;
+	u32 dcvr3;
+	u32 ltr0;
+	u32 ltr1;
+	u32 ltr2;
+	u32 ltr3;
+	u32 ltbr0;
+	u32 ltbr1;
+	u32 pmcr0;
+	u32 pmcr1;
+	u32 pdr2;
+};
+
+/* IIM control registers */
+struct iim_regs {
+	u32 iim_stat;
+	u32 iim_statm;
+	u32 iim_err;
+	u32 iim_emask;
+	u32 iim_fctl;
+	u32 iim_ua;
+	u32 iim_la;
+	u32 iim_sdat;
+	u32 iim_prev;
+	u32 iim_srev;
+	u32 iim_prg_p;
+	u32 iim_scs0;
+	u32 iim_scs1;
+	u32 iim_scs2;
+	u32 iim_scs3;
+	u32 res[0x1f1];
+	struct fuse_bank {
+		u32 fuse_regs[0x20];
+		u32 fuse_rsvd[0xe0];
+	} bank[3];
+};
+
+struct fuse_bank0_regs {
+	u32 fuse0_5[6];
+	u32 usr;
+	u32 fuse7_15[9];
+};
+
+struct fuse_bank2_regs {
+	u32 fuse0;
+	u32 uid[8];
+	u32 fuse9_15[7];
+};
+
+struct iomuxc_regs {
+	u32 unused1;
+	u32 unused2;
+	u32 gpr;
+};
+
+struct mx3_cpu_type {
+	u8 srev;
+	u32 v;
+};
+
+#define IOMUX_PADNUM_MASK	0x1ff
+#define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK)
+
+/*
+ * various IOMUX pad functions
+ */
+enum iomux_pad_config {
+	PAD_CTL_NOLOOPBACK	= 0x0 << 9,
+	PAD_CTL_LOOPBACK	= 0x1 << 9,
+	PAD_CTL_PKE_NONE	= 0x0 << 8,
+	PAD_CTL_PKE_ENABLE	= 0x1 << 8,
+	PAD_CTL_PUE_KEEPER	= 0x0 << 7,
+	PAD_CTL_PUE_PUD		= 0x1 << 7,
+	PAD_CTL_100K_PD		= 0x0 << 5,
+	PAD_CTL_100K_PU		= 0x1 << 5,
+	PAD_CTL_47K_PU		= 0x2 << 5,
+	PAD_CTL_22K_PU		= 0x3 << 5,
+	PAD_CTL_HYS_CMOS	= 0x0 << 4,
+	PAD_CTL_HYS_SCHMITZ	= 0x1 << 4,
+	PAD_CTL_ODE_CMOS	= 0x0 << 3,
+	PAD_CTL_ODE_OpenDrain	= 0x1 << 3,
+	PAD_CTL_DRV_NORMAL	= 0x0 << 1,
+	PAD_CTL_DRV_HIGH	= 0x1 << 1,
+	PAD_CTL_DRV_MAX		= 0x2 << 1,
+	PAD_CTL_SRE_SLOW	= 0x0 << 0,
+	PAD_CTL_SRE_FAST	= 0x1 << 0
+};
+
+/*
+ * This enumeration is constructed based on the Section
+ * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
+ * value is constructed based on the rules described above.
+ */
+
+enum iomux_pins {
+	MX31_PIN_TTM_PAD	= IOMUX_PIN(0xff,   0),
+	MX31_PIN_CSPI3_SPI_RDY	= IOMUX_PIN(0xff,   1),
+	MX31_PIN_CSPI3_SCLK	= IOMUX_PIN(0xff,   2),
+	MX31_PIN_CSPI3_MISO	= IOMUX_PIN(0xff,   3),
+	MX31_PIN_CSPI3_MOSI	= IOMUX_PIN(0xff,   4),
+	MX31_PIN_CLKSS		= IOMUX_PIN(0xff,   5),
+	MX31_PIN_CE_CONTROL	= IOMUX_PIN(0xff,   6),
+	MX31_PIN_ATA_RESET_B	= IOMUX_PIN(95,     7),
+	MX31_PIN_ATA_DMACK	= IOMUX_PIN(94,     8),
+	MX31_PIN_ATA_DIOW	= IOMUX_PIN(93,     9),
+	MX31_PIN_ATA_DIOR	= IOMUX_PIN(92,    10),
+	MX31_PIN_ATA_CS1	= IOMUX_PIN(91,    11),
+	MX31_PIN_ATA_CS0	= IOMUX_PIN(90,    12),
+	MX31_PIN_SD1_DATA3	= IOMUX_PIN(63,    13),
+	MX31_PIN_SD1_DATA2	= IOMUX_PIN(62,    14),
+	MX31_PIN_SD1_DATA1	= IOMUX_PIN(61,    15),
+	MX31_PIN_SD1_DATA0	= IOMUX_PIN(60,    16),
+	MX31_PIN_SD1_CLK	= IOMUX_PIN(59,    17),
+	MX31_PIN_SD1_CMD	= IOMUX_PIN(58,    18),
+	MX31_PIN_D3_SPL		= IOMUX_PIN(0xff,  19),
+	MX31_PIN_D3_CLS		= IOMUX_PIN(0xff,  20),
+	MX31_PIN_D3_REV		= IOMUX_PIN(0xff,  21),
+	MX31_PIN_CONTRAST	= IOMUX_PIN(0xff,  22),
+	MX31_PIN_VSYNC3		= IOMUX_PIN(0xff,  23),
+	MX31_PIN_READ		= IOMUX_PIN(0xff,  24),
+	MX31_PIN_WRITE		= IOMUX_PIN(0xff,  25),
+	MX31_PIN_PAR_RS		= IOMUX_PIN(0xff,  26),
+	MX31_PIN_SER_RS		= IOMUX_PIN(89,    27),
+	MX31_PIN_LCS1		= IOMUX_PIN(88,    28),
+	MX31_PIN_LCS0		= IOMUX_PIN(87,    29),
+	MX31_PIN_SD_D_CLK	= IOMUX_PIN(86,    30),
+	MX31_PIN_SD_D_IO	= IOMUX_PIN(85,    31),
+	MX31_PIN_SD_D_I		= IOMUX_PIN(84,    32),
+	MX31_PIN_DRDY0		= IOMUX_PIN(0xff,  33),
+	MX31_PIN_FPSHIFT	= IOMUX_PIN(0xff,  34),
+	MX31_PIN_HSYNC		= IOMUX_PIN(0xff,  35),
+	MX31_PIN_VSYNC0		= IOMUX_PIN(0xff,  36),
+	MX31_PIN_LD17		= IOMUX_PIN(0xff,  37),
+	MX31_PIN_LD16		= IOMUX_PIN(0xff,  38),
+	MX31_PIN_LD15		= IOMUX_PIN(0xff,  39),
+	MX31_PIN_LD14		= IOMUX_PIN(0xff,  40),
+	MX31_PIN_LD13		= IOMUX_PIN(0xff,  41),
+	MX31_PIN_LD12		= IOMUX_PIN(0xff,  42),
+	MX31_PIN_LD11		= IOMUX_PIN(0xff,  43),
+	MX31_PIN_LD10		= IOMUX_PIN(0xff,  44),
+	MX31_PIN_LD9		= IOMUX_PIN(0xff,  45),
+	MX31_PIN_LD8		= IOMUX_PIN(0xff,  46),
+	MX31_PIN_LD7		= IOMUX_PIN(0xff,  47),
+	MX31_PIN_LD6		= IOMUX_PIN(0xff,  48),
+	MX31_PIN_LD5		= IOMUX_PIN(0xff,  49),
+	MX31_PIN_LD4		= IOMUX_PIN(0xff,  50),
+	MX31_PIN_LD3		= IOMUX_PIN(0xff,  51),
+	MX31_PIN_LD2		= IOMUX_PIN(0xff,  52),
+	MX31_PIN_LD1		= IOMUX_PIN(0xff,  53),
+	MX31_PIN_LD0		= IOMUX_PIN(0xff,  54),
+	MX31_PIN_USBH2_DATA1	= IOMUX_PIN(0xff,  55),
+	MX31_PIN_USBH2_DATA0	= IOMUX_PIN(0xff,  56),
+	MX31_PIN_USBH2_NXT	= IOMUX_PIN(0xff,  57),
+	MX31_PIN_USBH2_STP	= IOMUX_PIN(0xff,  58),
+	MX31_PIN_USBH2_DIR	= IOMUX_PIN(0xff,  59),
+	MX31_PIN_USBH2_CLK	= IOMUX_PIN(0xff,  60),
+	MX31_PIN_USBOTG_DATA7	= IOMUX_PIN(0xff,  61),
+	MX31_PIN_USBOTG_DATA6	= IOMUX_PIN(0xff,  62),
+	MX31_PIN_USBOTG_DATA5	= IOMUX_PIN(0xff,  63),
+	MX31_PIN_USBOTG_DATA4	= IOMUX_PIN(0xff,  64),
+	MX31_PIN_USBOTG_DATA3	= IOMUX_PIN(0xff,  65),
+	MX31_PIN_USBOTG_DATA2	= IOMUX_PIN(0xff,  66),
+	MX31_PIN_USBOTG_DATA1	= IOMUX_PIN(0xff,  67),
+	MX31_PIN_USBOTG_DATA0	= IOMUX_PIN(0xff,  68),
+	MX31_PIN_USBOTG_NXT	= IOMUX_PIN(0xff,  69),
+	MX31_PIN_USBOTG_STP	= IOMUX_PIN(0xff,  70),
+	MX31_PIN_USBOTG_DIR	= IOMUX_PIN(0xff,  71),
+	MX31_PIN_USBOTG_CLK	= IOMUX_PIN(0xff,  72),
+	MX31_PIN_USB_BYP	= IOMUX_PIN(31,    73),
+	MX31_PIN_USB_OC		= IOMUX_PIN(30,    74),
+	MX31_PIN_USB_PWR	= IOMUX_PIN(29,    75),
+	MX31_PIN_SJC_MOD	= IOMUX_PIN(0xff,  76),
+	MX31_PIN_DE_B		= IOMUX_PIN(0xff,  77),
+	MX31_PIN_TRSTB		= IOMUX_PIN(0xff,  78),
+	MX31_PIN_TDO		= IOMUX_PIN(0xff,  79),
+	MX31_PIN_TDI		= IOMUX_PIN(0xff,  80),
+	MX31_PIN_TMS		= IOMUX_PIN(0xff,  81),
+	MX31_PIN_TCK		= IOMUX_PIN(0xff,  82),
+	MX31_PIN_RTCK		= IOMUX_PIN(0xff,  83),
+	MX31_PIN_KEY_COL7	= IOMUX_PIN(57,    84),
+	MX31_PIN_KEY_COL6	= IOMUX_PIN(56,    85),
+	MX31_PIN_KEY_COL5	= IOMUX_PIN(55,    86),
+	MX31_PIN_KEY_COL4	= IOMUX_PIN(54,    87),
+	MX31_PIN_KEY_COL3	= IOMUX_PIN(0xff,  88),
+	MX31_PIN_KEY_COL2	= IOMUX_PIN(0xff,  89),
+	MX31_PIN_KEY_COL1	= IOMUX_PIN(0xff,  90),
+	MX31_PIN_KEY_COL0	= IOMUX_PIN(0xff,  91),
+	MX31_PIN_KEY_ROW7	= IOMUX_PIN(53,    92),
+	MX31_PIN_KEY_ROW6	= IOMUX_PIN(52,    93),
+	MX31_PIN_KEY_ROW5	= IOMUX_PIN(51,    94),
+	MX31_PIN_KEY_ROW4	= IOMUX_PIN(50,    95),
+	MX31_PIN_KEY_ROW3	= IOMUX_PIN(0xff,  96),
+	MX31_PIN_KEY_ROW2	= IOMUX_PIN(0xff,  97),
+	MX31_PIN_KEY_ROW1	= IOMUX_PIN(0xff,  98),
+	MX31_PIN_KEY_ROW0	= IOMUX_PIN(0xff,  99),
+	MX31_PIN_BATT_LINE	= IOMUX_PIN(49,   100),
+	MX31_PIN_CTS2		= IOMUX_PIN(0xff, 101),
+	MX31_PIN_RTS2		= IOMUX_PIN(0xff, 102),
+	MX31_PIN_TXD2		= IOMUX_PIN(28,   103),
+	MX31_PIN_RXD2		= IOMUX_PIN(27,   104),
+	MX31_PIN_DTR_DCE2	= IOMUX_PIN(48,   105),
+	MX31_PIN_DCD_DTE1	= IOMUX_PIN(47,   106),
+	MX31_PIN_RI_DTE1	= IOMUX_PIN(46,   107),
+	MX31_PIN_DSR_DTE1	= IOMUX_PIN(45,   108),
+	MX31_PIN_DTR_DTE1	= IOMUX_PIN(44,   109),
+	MX31_PIN_DCD_DCE1	= IOMUX_PIN(43,   110),
+	MX31_PIN_RI_DCE1	= IOMUX_PIN(42,   111),
+	MX31_PIN_DSR_DCE1	= IOMUX_PIN(41,   112),
+	MX31_PIN_DTR_DCE1	= IOMUX_PIN(40,   113),
+	MX31_PIN_CTS1		= IOMUX_PIN(39,   114),
+	MX31_PIN_RTS1		= IOMUX_PIN(38,   115),
+	MX31_PIN_TXD1		= IOMUX_PIN(37,   116),
+	MX31_PIN_RXD1		= IOMUX_PIN(36,   117),
+	MX31_PIN_CSPI2_SPI_RDY	= IOMUX_PIN(0xff, 118),
+	MX31_PIN_CSPI2_SCLK	= IOMUX_PIN(0xff, 119),
+	MX31_PIN_CSPI2_SS2	= IOMUX_PIN(0xff, 120),
+	MX31_PIN_CSPI2_SS1	= IOMUX_PIN(0xff, 121),
+	MX31_PIN_CSPI2_SS0	= IOMUX_PIN(0xff, 122),
+	MX31_PIN_CSPI2_MISO	= IOMUX_PIN(0xff, 123),
+	MX31_PIN_CSPI2_MOSI	= IOMUX_PIN(0xff, 124),
+	MX31_PIN_CSPI1_SPI_RDY	= IOMUX_PIN(0xff, 125),
+	MX31_PIN_CSPI1_SCLK	= IOMUX_PIN(0xff, 126),
+	MX31_PIN_CSPI1_SS2	= IOMUX_PIN(0xff, 127),
+	MX31_PIN_CSPI1_SS1	= IOMUX_PIN(0xff, 128),
+	MX31_PIN_CSPI1_SS0	= IOMUX_PIN(0xff, 129),
+	MX31_PIN_CSPI1_MISO	= IOMUX_PIN(0xff, 130),
+	MX31_PIN_CSPI1_MOSI	= IOMUX_PIN(0xff, 131),
+	MX31_PIN_SFS6		= IOMUX_PIN(26,   132),
+	MX31_PIN_SCK6		= IOMUX_PIN(25,   133),
+	MX31_PIN_SRXD6		= IOMUX_PIN(24,   134),
+	MX31_PIN_STXD6		= IOMUX_PIN(23,   135),
+	MX31_PIN_SFS5		= IOMUX_PIN(0xff, 136),
+	MX31_PIN_SCK5		= IOMUX_PIN(0xff, 137),
+	MX31_PIN_SRXD5		= IOMUX_PIN(22,   138),
+	MX31_PIN_STXD5		= IOMUX_PIN(21,   139),
+	MX31_PIN_SFS4		= IOMUX_PIN(0xff, 140),
+	MX31_PIN_SCK4		= IOMUX_PIN(0xff, 141),
+	MX31_PIN_SRXD4		= IOMUX_PIN(20,   142),
+	MX31_PIN_STXD4		= IOMUX_PIN(19,   143),
+	MX31_PIN_SFS3		= IOMUX_PIN(0xff, 144),
+	MX31_PIN_SCK3		= IOMUX_PIN(0xff, 145),
+	MX31_PIN_SRXD3		= IOMUX_PIN(18,   146),
+	MX31_PIN_STXD3		= IOMUX_PIN(17,   147),
+	MX31_PIN_I2C_DAT	= IOMUX_PIN(0xff, 148),
+	MX31_PIN_I2C_CLK	= IOMUX_PIN(0xff, 149),
+	MX31_PIN_CSI_PIXCLK	= IOMUX_PIN(83,   150),
+	MX31_PIN_CSI_HSYNC	= IOMUX_PIN(82,   151),
+	MX31_PIN_CSI_VSYNC	= IOMUX_PIN(81,   152),
+	MX31_PIN_CSI_MCLK	= IOMUX_PIN(80,   153),
+	MX31_PIN_CSI_D15	= IOMUX_PIN(79,   154),
+	MX31_PIN_CSI_D14	= IOMUX_PIN(78,   155),
+	MX31_PIN_CSI_D13	= IOMUX_PIN(77,   156),
+	MX31_PIN_CSI_D12	= IOMUX_PIN(76,   157),
+	MX31_PIN_CSI_D11	= IOMUX_PIN(75,   158),
+	MX31_PIN_CSI_D10	= IOMUX_PIN(74,   159),
+	MX31_PIN_CSI_D9		= IOMUX_PIN(73,   160),
+	MX31_PIN_CSI_D8		= IOMUX_PIN(72,   161),
+	MX31_PIN_CSI_D7		= IOMUX_PIN(71,   162),
+	MX31_PIN_CSI_D6		= IOMUX_PIN(70,   163),
+	MX31_PIN_CSI_D5		= IOMUX_PIN(69,   164),
+	MX31_PIN_CSI_D4		= IOMUX_PIN(68,   165),
+	MX31_PIN_M_GRANT	= IOMUX_PIN(0xff, 166),
+	MX31_PIN_M_REQUEST	= IOMUX_PIN(0xff, 167),
+	MX31_PIN_PC_POE		= IOMUX_PIN(0xff, 168),
+	MX31_PIN_PC_RW_B	= IOMUX_PIN(0xff, 169),
+	MX31_PIN_IOIS16		= IOMUX_PIN(0xff, 170),
+	MX31_PIN_PC_RST		= IOMUX_PIN(0xff, 171),
+	MX31_PIN_PC_BVD2	= IOMUX_PIN(0xff, 172),
+	MX31_PIN_PC_BVD1	= IOMUX_PIN(0xff, 173),
+	MX31_PIN_PC_VS2		= IOMUX_PIN(0xff, 174),
+	MX31_PIN_PC_VS1		= IOMUX_PIN(0xff, 175),
+	MX31_PIN_PC_PWRON	= IOMUX_PIN(0xff, 176),
+	MX31_PIN_PC_READY	= IOMUX_PIN(0xff, 177),
+	MX31_PIN_PC_WAIT_B	= IOMUX_PIN(0xff, 178),
+	MX31_PIN_PC_CD2_B	= IOMUX_PIN(0xff, 179),
+	MX31_PIN_PC_CD1_B	= IOMUX_PIN(0xff, 180),
+	MX31_PIN_D0		= IOMUX_PIN(0xff, 181),
+	MX31_PIN_D1		= IOMUX_PIN(0xff, 182),
+	MX31_PIN_D2		= IOMUX_PIN(0xff, 183),
+	MX31_PIN_D3		= IOMUX_PIN(0xff, 184),
+	MX31_PIN_D4		= IOMUX_PIN(0xff, 185),
+	MX31_PIN_D5		= IOMUX_PIN(0xff, 186),
+	MX31_PIN_D6		= IOMUX_PIN(0xff, 187),
+	MX31_PIN_D7		= IOMUX_PIN(0xff, 188),
+	MX31_PIN_D8		= IOMUX_PIN(0xff, 189),
+	MX31_PIN_D9		= IOMUX_PIN(0xff, 190),
+	MX31_PIN_D10		= IOMUX_PIN(0xff, 191),
+	MX31_PIN_D11		= IOMUX_PIN(0xff, 192),
+	MX31_PIN_D12		= IOMUX_PIN(0xff, 193),
+	MX31_PIN_D13		= IOMUX_PIN(0xff, 194),
+	MX31_PIN_D14		= IOMUX_PIN(0xff, 195),
+	MX31_PIN_D15		= IOMUX_PIN(0xff, 196),
+	MX31_PIN_NFRB		= IOMUX_PIN(16,   197),
+	MX31_PIN_NFCE_B		= IOMUX_PIN(15,   198),
+	MX31_PIN_NFWP_B		= IOMUX_PIN(14,   199),
+	MX31_PIN_NFCLE		= IOMUX_PIN(13,   200),
+	MX31_PIN_NFALE		= IOMUX_PIN(12,   201),
+	MX31_PIN_NFRE_B		= IOMUX_PIN(11,   202),
+	MX31_PIN_NFWE_B		= IOMUX_PIN(10,   203),
+	MX31_PIN_SDQS3		= IOMUX_PIN(0xff, 204),
+	MX31_PIN_SDQS2		= IOMUX_PIN(0xff, 205),
+	MX31_PIN_SDQS1		= IOMUX_PIN(0xff, 206),
+	MX31_PIN_SDQS0		= IOMUX_PIN(0xff, 207),
+	MX31_PIN_SDCLK_B	= IOMUX_PIN(0xff, 208),
+	MX31_PIN_SDCLK		= IOMUX_PIN(0xff, 209),
+	MX31_PIN_SDCKE1		= IOMUX_PIN(0xff, 210),
+	MX31_PIN_SDCKE0		= IOMUX_PIN(0xff, 211),
+	MX31_PIN_SDWE		= IOMUX_PIN(0xff, 212),
+	MX31_PIN_CAS		= IOMUX_PIN(0xff, 213),
+	MX31_PIN_RAS		= IOMUX_PIN(0xff, 214),
+	MX31_PIN_RW		= IOMUX_PIN(0xff, 215),
+	MX31_PIN_BCLK		= IOMUX_PIN(0xff, 216),
+	MX31_PIN_LBA		= IOMUX_PIN(0xff, 217),
+	MX31_PIN_ECB		= IOMUX_PIN(0xff, 218),
+	MX31_PIN_CS5		= IOMUX_PIN(0xff, 219),
+	MX31_PIN_CS4		= IOMUX_PIN(0xff, 220),
+	MX31_PIN_CS3		= IOMUX_PIN(0xff, 221),
+	MX31_PIN_CS2		= IOMUX_PIN(0xff, 222),
+	MX31_PIN_CS1		= IOMUX_PIN(0xff, 223),
+	MX31_PIN_CS0		= IOMUX_PIN(0xff, 224),
+	MX31_PIN_OE		= IOMUX_PIN(0xff, 225),
+	MX31_PIN_EB1		= IOMUX_PIN(0xff, 226),
+	MX31_PIN_EB0		= IOMUX_PIN(0xff, 227),
+	MX31_PIN_DQM3		= IOMUX_PIN(0xff, 228),
+	MX31_PIN_DQM2		= IOMUX_PIN(0xff, 229),
+	MX31_PIN_DQM1		= IOMUX_PIN(0xff, 230),
+	MX31_PIN_DQM0		= IOMUX_PIN(0xff, 231),
+	MX31_PIN_SD31		= IOMUX_PIN(0xff, 232),
+	MX31_PIN_SD30		= IOMUX_PIN(0xff, 233),
+	MX31_PIN_SD29		= IOMUX_PIN(0xff, 234),
+	MX31_PIN_SD28		= IOMUX_PIN(0xff, 235),
+	MX31_PIN_SD27		= IOMUX_PIN(0xff, 236),
+	MX31_PIN_SD26		= IOMUX_PIN(0xff, 237),
+	MX31_PIN_SD25		= IOMUX_PIN(0xff, 238),
+	MX31_PIN_SD24		= IOMUX_PIN(0xff, 239),
+	MX31_PIN_SD23		= IOMUX_PIN(0xff, 240),
+	MX31_PIN_SD22		= IOMUX_PIN(0xff, 241),
+	MX31_PIN_SD21		= IOMUX_PIN(0xff, 242),
+	MX31_PIN_SD20		= IOMUX_PIN(0xff, 243),
+	MX31_PIN_SD19		= IOMUX_PIN(0xff, 244),
+	MX31_PIN_SD18		= IOMUX_PIN(0xff, 245),
+	MX31_PIN_SD17		= IOMUX_PIN(0xff, 246),
+	MX31_PIN_SD16		= IOMUX_PIN(0xff, 247),
+	MX31_PIN_SD15		= IOMUX_PIN(0xff, 248),
+	MX31_PIN_SD14		= IOMUX_PIN(0xff, 249),
+	MX31_PIN_SD13		= IOMUX_PIN(0xff, 250),
+	MX31_PIN_SD12		= IOMUX_PIN(0xff, 251),
+	MX31_PIN_SD11		= IOMUX_PIN(0xff, 252),
+	MX31_PIN_SD10		= IOMUX_PIN(0xff, 253),
+	MX31_PIN_SD9		= IOMUX_PIN(0xff, 254),
+	MX31_PIN_SD8		= IOMUX_PIN(0xff, 255),
+	MX31_PIN_SD7		= IOMUX_PIN(0xff, 256),
+	MX31_PIN_SD6		= IOMUX_PIN(0xff, 257),
+	MX31_PIN_SD5		= IOMUX_PIN(0xff, 258),
+	MX31_PIN_SD4		= IOMUX_PIN(0xff, 259),
+	MX31_PIN_SD3		= IOMUX_PIN(0xff, 260),
+	MX31_PIN_SD2		= IOMUX_PIN(0xff, 261),
+	MX31_PIN_SD1		= IOMUX_PIN(0xff, 262),
+	MX31_PIN_SD0		= IOMUX_PIN(0xff, 263),
+	MX31_PIN_SDBA0		= IOMUX_PIN(0xff, 264),
+	MX31_PIN_SDBA1		= IOMUX_PIN(0xff, 265),
+	MX31_PIN_A25		= IOMUX_PIN(0xff, 266),
+	MX31_PIN_A24		= IOMUX_PIN(0xff, 267),
+	MX31_PIN_A23		= IOMUX_PIN(0xff, 268),
+	MX31_PIN_A22		= IOMUX_PIN(0xff, 269),
+	MX31_PIN_A21		= IOMUX_PIN(0xff, 270),
+	MX31_PIN_A20		= IOMUX_PIN(0xff, 271),
+	MX31_PIN_A19		= IOMUX_PIN(0xff, 272),
+	MX31_PIN_A18		= IOMUX_PIN(0xff, 273),
+	MX31_PIN_A17		= IOMUX_PIN(0xff, 274),
+	MX31_PIN_A16		= IOMUX_PIN(0xff, 275),
+	MX31_PIN_A14		= IOMUX_PIN(0xff, 276),
+	MX31_PIN_A15		= IOMUX_PIN(0xff, 277),
+	MX31_PIN_A13		= IOMUX_PIN(0xff, 278),
+	MX31_PIN_A12		= IOMUX_PIN(0xff, 279),
+	MX31_PIN_A11		= IOMUX_PIN(0xff, 280),
+	MX31_PIN_MA10		= IOMUX_PIN(0xff, 281),
+	MX31_PIN_A10		= IOMUX_PIN(0xff, 282),
+	MX31_PIN_A9		= IOMUX_PIN(0xff, 283),
+	MX31_PIN_A8		= IOMUX_PIN(0xff, 284),
+	MX31_PIN_A7		= IOMUX_PIN(0xff, 285),
+	MX31_PIN_A6		= IOMUX_PIN(0xff, 286),
+	MX31_PIN_A5		= IOMUX_PIN(0xff, 287),
+	MX31_PIN_A4		= IOMUX_PIN(0xff, 288),
+	MX31_PIN_A3		= IOMUX_PIN(0xff, 289),
+	MX31_PIN_A2		= IOMUX_PIN(0xff, 290),
+	MX31_PIN_A1		= IOMUX_PIN(0xff, 291),
+	MX31_PIN_A0		= IOMUX_PIN(0xff, 292),
+	MX31_PIN_VPG1		= IOMUX_PIN(0xff, 293),
+	MX31_PIN_VPG0		= IOMUX_PIN(0xff, 294),
+	MX31_PIN_DVFS1		= IOMUX_PIN(0xff, 295),
+	MX31_PIN_DVFS0		= IOMUX_PIN(0xff, 296),
+	MX31_PIN_VSTBY		= IOMUX_PIN(0xff, 297),
+	MX31_PIN_POWER_FAIL	= IOMUX_PIN(0xff, 298),
+	MX31_PIN_CKIL		= IOMUX_PIN(0xff, 299),
+	MX31_PIN_BOOT_MODE4	= IOMUX_PIN(0xff, 300),
+	MX31_PIN_BOOT_MODE3	= IOMUX_PIN(0xff, 301),
+	MX31_PIN_BOOT_MODE2	= IOMUX_PIN(0xff, 302),
+	MX31_PIN_BOOT_MODE1	= IOMUX_PIN(0xff, 303),
+	MX31_PIN_BOOT_MODE0	= IOMUX_PIN(0xff, 304),
+	MX31_PIN_CLKO		= IOMUX_PIN(0xff, 305),
+	MX31_PIN_POR_B		= IOMUX_PIN(0xff, 306),
+	MX31_PIN_RESET_IN_B	= IOMUX_PIN(0xff, 307),
+	MX31_PIN_CKIH		= IOMUX_PIN(0xff, 308),
+	MX31_PIN_SIMPD0		= IOMUX_PIN(35,   309),
+	MX31_PIN_SRX0		= IOMUX_PIN(34,   310),
+	MX31_PIN_STX0		= IOMUX_PIN(33,   311),
+	MX31_PIN_SVEN0		= IOMUX_PIN(32,   312),
+	MX31_PIN_SRST0		= IOMUX_PIN(67,   313),
+	MX31_PIN_SCLK0		= IOMUX_PIN(66,   314),
+	MX31_PIN_GPIO3_1	= IOMUX_PIN(65,   315),
+	MX31_PIN_GPIO3_0	= IOMUX_PIN(64,   316),
+	MX31_PIN_GPIO1_6	= IOMUX_PIN(6,    317),
+	MX31_PIN_GPIO1_5	= IOMUX_PIN(5,    318),
+	MX31_PIN_GPIO1_4	= IOMUX_PIN(4,    319),
+	MX31_PIN_GPIO1_3	= IOMUX_PIN(3,    320),
+	MX31_PIN_GPIO1_2	= IOMUX_PIN(2,    321),
+	MX31_PIN_GPIO1_1	= IOMUX_PIN(1,    322),
+	MX31_PIN_GPIO1_0	= IOMUX_PIN(0,    323),
+	MX31_PIN_PWMO		= IOMUX_PIN(9,    324),
+	MX31_PIN_WATCHDOG_RST	= IOMUX_PIN(0xff, 325),
+	MX31_PIN_COMPARE	= IOMUX_PIN(8,    326),
+	MX31_PIN_CAPTURE	= IOMUX_PIN(7,    327),
+};
+
+/*
+ * various IOMUX general purpose functions
+ */
+enum iomux_gp_func {
+	MUX_PGP_FIRI			= 1 << 0,
+	MUX_DDR_MODE			= 1 << 1,
+	MUX_PGP_CSPI_BB			= 1 << 2,
+	MUX_PGP_ATA_1			= 1 << 3,
+	MUX_PGP_ATA_2			= 1 << 4,
+	MUX_PGP_ATA_3			= 1 << 5,
+	MUX_PGP_ATA_4			= 1 << 6,
+	MUX_PGP_ATA_5			= 1 << 7,
+	MUX_PGP_ATA_6			= 1 << 8,
+	MUX_PGP_ATA_7			= 1 << 9,
+	MUX_PGP_ATA_8			= 1 << 10,
+	MUX_PGP_UH2			= 1 << 11,
+	MUX_SDCTL_CSD0_SEL		= 1 << 12,
+	MUX_SDCTL_CSD1_SEL		= 1 << 13,
+	MUX_CSPI1_UART3			= 1 << 14,
+	MUX_EXTDMAREQ2_MBX_SEL		= 1 << 15,
+	MUX_TAMPER_DETECT_EN		= 1 << 16,
+	MUX_PGP_USB_4WIRE		= 1 << 17,
+	MUX_PGP_USB_COMMON		= 1 << 18,
+	MUX_SDHC_MEMSTICK1		= 1 << 19,
+	MUX_SDHC_MEMSTICK2		= 1 << 20,
+	MUX_PGP_SPLL_BYP		= 1 << 21,
+	MUX_PGP_UPLL_BYP		= 1 << 22,
+	MUX_PGP_MSHC1_CLK_SEL		= 1 << 23,
+	MUX_PGP_MSHC2_CLK_SEL		= 1 << 24,
+	MUX_CSPI3_UART5_SEL		= 1 << 25,
+	MUX_PGP_ATA_9			= 1 << 26,
+	MUX_PGP_USB_SUSPEND		= 1 << 27,
+	MUX_PGP_USB_OTG_LOOPBACK	= 1 << 28,
+	MUX_PGP_USB_HS1_LOOPBACK	= 1 << 29,
+	MUX_PGP_USB_HS2_LOOPBACK	= 1 << 30,
+	MUX_CLKO_DDR_MODE		= 1 << 31,
+};
+
+/* Bit definitions for RCSR register in CCM */
+#define CCM_RCSR_NF16B	(1 << 31)
+#define CCM_RCSR_NFMS	(1 << 30)
+
+/* WEIM CS control registers */
+struct mx31_weim_cscr {
+	u32 upper;
+	u32 lower;
+	u32 additional;
+	u32 reserved;
+};
+
+struct mx31_weim {
+	struct mx31_weim_cscr cscr[6];
+};
+
+/* ESD control registers */
+struct esdc_regs {
+	u32 ctl0;
+	u32 cfg0;
+	u32 ctl1;
+	u32 cfg1;
+	u32 misc;
+	u32 dly[5];
+	u32 dlyl;
+};
+
+#endif
+
+#define ARCH_MXC
+
+#define __REG(x)     (*((volatile u32 *)(x)))
+#define __REG16(x)   (*((volatile u16 *)(x)))
+#define __REG8(x)    (*((volatile u8 *)(x)))
+
+#define CCM_BASE	0x53f80000
+#define CCM_CCMR	(CCM_BASE + 0x00)
+#define CCM_PDR0	(CCM_BASE + 0x04)
+#define CCM_PDR1	(CCM_BASE + 0x08)
+#define CCM_RCSR	(CCM_BASE + 0x0c)
+#define CCM_MPCTL	(CCM_BASE + 0x10)
+#define CCM_UPCTL	(CCM_BASE + 0x14)
+#define CCM_SPCTL	(CCM_BASE + 0x18)
+#define CCM_COSR	(CCM_BASE + 0x1C)
+#define CCM_CGR0	(CCM_BASE + 0x20)
+#define CCM_CGR1	(CCM_BASE + 0x24)
+#define CCM_CGR2	(CCM_BASE + 0x28)
+
+#define CCMR_MDS	(1 << 7)
+#define CCMR_SBYCS	(1 << 4)
+#define CCMR_MPE	(1 << 3)
+#define CCMR_PRCS_MASK	(3 << 1)
+#define CCMR_FPM	(1 << 1)
+#define CCMR_CKIH	(2 << 1)
+
+#define MX31_IIM_BASE_ADDR	0x5001C000
+#define IIM_BASE_ADDR		MX31_IIM_BASE_ADDR
+
+#define PDR0_CSI_PODF(x)	(((x) & 0x3f) << 26)
+#define PDR0_CSI_PRDF(x)	(((x) & 0x7) << 23)
+#define PDR0_PER_PODF(x)	(((x) & 0x1f) << 16)
+#define PDR0_HSP_PODF(x)	(((x) & 0x7) << 11)
+#define PDR0_NFC_PODF(x)	(((x) & 0x7) << 8)
+#define PDR0_IPG_PODF(x)	(((x) & 0x3) << 6)
+#define PDR0_MAX_PODF(x)	(((x) & 0x7) << 3)
+#define PDR0_MCU_PODF(x)	((x) & 0x7)
+
+#define PDR1_USB_PRDF(x)	(((x) & 0x3) << 30)
+#define PDR1_USB_PODF(x)	(((x) & 0x7) << 27)
+#define PDR1_FIRI_PRDF(x)	(((x) & 0x7) << 24)
+#define PDR1_FIRI_PODF(x)	(((x) & 0x3f) << 18)
+#define PDR1_SSI2_PRDF(x)	(((x) & 0x7) << 15)
+#define PDR1_SSI2_PODF(x)	(((x) & 0x3f) << 9)
+#define PDR1_SSI1_PRDF(x)	(((x) & 0x7) << 6)
+#define PDR1_SSI1_PODF(x)	((x) & 0x3f)
+
+#define PLL_BRMO(x)		(((x) & 0x1) << 31)
+#define PLL_PD(x)		(((x) & 0xf) << 26)
+#define PLL_MFD(x)		(((x) & 0x3ff) << 16)
+#define PLL_MFI(x)		(((x) & 0xf) << 10)
+#define PLL_MFN(x)		(((x) & 0x3ff) << 0)
+
+#define GET_PDR0_CSI_PODF(x)	(((x) >> 26) & 0x3f)
+#define GET_PDR0_CSI_PRDF(x)	(((x) >> 23) & 0x7)
+#define GET_PDR0_PER_PODF(x)	(((x) >> 16) & 0x1f)
+#define GET_PDR0_HSP_PODF(x)	(((x) >> 11) & 0x7)
+#define GET_PDR0_NFC_PODF(x)	(((x) >> 8) & 0x7)
+#define GET_PDR0_IPG_PODF(x)	(((x) >> 6) & 0x3)
+#define GET_PDR0_MAX_PODF(x)	(((x) >> 3) & 0x7)
+#define GET_PDR0_MCU_PODF(x)	((x) & 0x7)
+
+#define GET_PLL_PD(x)		(((x) >> 26) & 0xf)
+#define GET_PLL_MFD(x)		(((x) >> 16) & 0x3ff)
+#define GET_PLL_MFI(x)		(((x) >> 10) & 0xf)
+#define GET_PLL_MFN(x)		(((x) >> 0) & 0x3ff)
+
+
+#define WEIM_ESDCTL0	0xB8001000
+#define WEIM_ESDCFG0	0xB8001004
+#define WEIM_ESDCTL1	0xB8001008
+#define WEIM_ESDCFG1	0xB800100C
+#define WEIM_ESDMISC	0xB8001010
+
+#define UART1_BASE	0x43F90000
+#define UART2_BASE	0x43F94000
+#define UART3_BASE	0x5000C000
+#define UART4_BASE	0x43FB0000
+#define UART5_BASE	0x43FB4000
+
+#define I2C1_BASE_ADDR          0x43f80000
+#define I2C1_CLK_OFFSET		26
+#define I2C2_BASE_ADDR          0x43F98000
+#define I2C2_CLK_OFFSET		28
+#define I2C3_BASE_ADDR          0x43f84000
+#define I2C3_CLK_OFFSET		30
+
+#define ESDCTL_SDE			(1 << 31)
+#define ESDCTL_CMD_RW			(0 << 28)
+#define ESDCTL_CMD_PRECHARGE		(1 << 28)
+#define ESDCTL_CMD_AUTOREFRESH		(2 << 28)
+#define ESDCTL_CMD_LOADMODEREG		(3 << 28)
+#define ESDCTL_CMD_MANUALREFRESH	(4 << 28)
+#define ESDCTL_ROW_13			(2 << 24)
+#define ESDCTL_ROW(x)			((x) << 24)
+#define ESDCTL_COL_9			(1 << 20)
+#define ESDCTL_COL(x)			((x) << 20)
+#define ESDCTL_DSIZ(x)			((x) << 16)
+#define ESDCTL_SREFR(x)			((x) << 13)
+#define ESDCTL_PWDT(x)			((x) << 10)
+#define ESDCTL_FP(x)			((x) << 8)
+#define ESDCTL_BL(x)			((x) << 7)
+#define ESDCTL_PRCT(x)			((x) << 0)
+
+#define ESDCTL_BASE_ADDR	0xB8001000
+
+/* 13 fields of the upper CS control register */
+#define CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
+		cnc, wsc, ew, wws, edc) \
+	((sp) << 31 | (wp) << 30 | (bcd) << 28 | (psz) << 22 | (pme) << 21 |\
+	 (sync) << 20 | (dol) << 16 | (cnc) << 14 | (wsc) << 8 | (ew) << 7 |\
+	 (wws) << 4 | (edc) << 0)
+/* 12 fields of the lower CS control register */
+#define CSCR_L(oea, oen, ebwa, ebwn, \
+		csa, ebc, dsz, csn, psr, cre, wrap, csen) \
+	((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
+	 (csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
+	 (psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
+/* 14 fields of the additional CS control register */
+#define CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
+		wwu, age, cnc2, fce) \
+	((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
+	 (mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
+	 (dww) << 6 | (dct) << 4 | (wwu) << 3 |\
+	 (age) << 2 | (cnc2) << 1 | (fce) << 0)
+
+#define WEIM_BASE	0xb8002000
+
+#define IOMUXC_BASE	0x43FAC000
+#define IOMUXC_SW_MUX_CTL(x)	(IOMUXC_BASE + 0xc + (x) * 4)
+#define IOMUXC_SW_PAD_CTL(x)	(IOMUXC_BASE + 0x154 + (x) * 4)
+
+#define IPU_BASE		0x53fc0000
+#define IPU_CONF		IPU_BASE
+
+#define IPU_CONF_PXL_ENDIAN	(1<<8)
+#define IPU_CONF_DU_EN		(1<<7)
+#define IPU_CONF_DI_EN		(1<<6)
+#define IPU_CONF_ADC_EN		(1<<5)
+#define IPU_CONF_SDC_EN		(1<<4)
+#define IPU_CONF_PF_EN		(1<<3)
+#define IPU_CONF_ROT_EN		(1<<2)
+#define IPU_CONF_IC_EN		(1<<1)
+#define IPU_CONF_CSI_EN		(1<<0)
+
+#define ARM_PPMRR		0x40000015
+
+#define WDOG1_BASE_ADDR		0x53FDC000
+
+/*
+ * GPIO
+ */
+#define GPIO1_BASE_ADDR	0x53FCC000
+#define GPIO2_BASE_ADDR	0x53FD0000
+#define GPIO3_BASE_ADDR	0x53FA4000
+#define GPIO_DR		0x00000000	/* data register */
+#define GPIO_GDIR	0x00000004	/* direction register */
+#define GPIO_PSR	0x00000008	/* pad status register */
+
+/*
+ * Signal Multiplexing (IOMUX)
+ */
+
+/* bits in the SW_MUX_CTL registers */
+#define MUX_CTL_OUT_GPIO_DR	(0 << 4)
+#define MUX_CTL_OUT_FUNC	(1 << 4)
+#define MUX_CTL_OUT_ALT1	(2 << 4)
+#define MUX_CTL_OUT_ALT2	(3 << 4)
+#define MUX_CTL_OUT_ALT3	(4 << 4)
+#define MUX_CTL_OUT_ALT4	(5 << 4)
+#define MUX_CTL_OUT_ALT5	(6 << 4)
+#define MUX_CTL_OUT_ALT6	(7 << 4)
+#define MUX_CTL_IN_NONE		(0 << 0)
+#define MUX_CTL_IN_GPIO		(1 << 0)
+#define MUX_CTL_IN_FUNC		(2 << 0)
+#define MUX_CTL_IN_ALT1		(4 << 0)
+#define MUX_CTL_IN_ALT2		(8 << 0)
+
+#define MUX_CTL_FUNC		(MUX_CTL_OUT_FUNC | MUX_CTL_IN_FUNC)
+#define MUX_CTL_ALT1		(MUX_CTL_OUT_ALT1 | MUX_CTL_IN_ALT1)
+#define MUX_CTL_ALT2		(MUX_CTL_OUT_ALT2 | MUX_CTL_IN_ALT2)
+#define MUX_CTL_GPIO		(MUX_CTL_OUT_GPIO_DR | MUX_CTL_IN_GPIO)
+
+/* Register offsets based on IOMUXC_BASE */
+/* 0x00 .. 0x7b */
+#define MUX_CTL_CSPI3_MISO		0x0c
+#define MUX_CTL_CSPI3_SCLK		0x0d
+#define MUX_CTL_CSPI3_SPI_RDY	0x0e
+#define MUX_CTL_CSPI3_MOSI		0x13
+
+#define MUX_CTL_SD1_DATA1	0x18
+#define MUX_CTL_SD1_DATA2	0x19
+#define MUX_CTL_SD1_DATA3	0x1a
+#define MUX_CTL_SD1_CMD		0x1d
+#define MUX_CTL_SD1_CLK		0x1e
+#define MUX_CTL_SD1_DATA0	0x1f
+
+#define MUX_CTL_USBH2_DATA1	0x40
+#define MUX_CTL_USBH2_DIR	0x44
+#define MUX_CTL_USBH2_STP	0x45
+#define MUX_CTL_USBH2_NXT	0x46
+#define MUX_CTL_USBH2_DATA0	0x47
+#define MUX_CTL_USBH2_CLK	0x4B
+
+#define MUX_CTL_TXD2		0x70
+#define MUX_CTL_RTS2		0x71
+#define MUX_CTL_CTS2		0x72
+#define MUX_CTL_RXD2		0x77
+
+#define MUX_CTL_RTS1		0x7c
+#define MUX_CTL_CTS1		0x7d
+#define MUX_CTL_DTR_DCE1	0x7e
+#define MUX_CTL_DSR_DCE1	0x7f
+#define MUX_CTL_CSPI2_SCLK	0x80
+#define MUX_CTL_CSPI2_SPI_RDY	0x81
+#define MUX_CTL_RXD1		0x82
+#define MUX_CTL_TXD1		0x83
+#define MUX_CTL_CSPI2_MISO	0x84
+#define MUX_CTL_CSPI2_SS0	0x85
+#define MUX_CTL_CSPI2_SS1	0x86
+#define MUX_CTL_CSPI2_SS2	0x87
+#define MUX_CTL_CSPI1_SS2	0x88
+#define MUX_CTL_CSPI1_SCLK	0x89
+#define MUX_CTL_CSPI1_SPI_RDY	0x8a
+#define MUX_CTL_CSPI2_MOSI	0x8b
+#define MUX_CTL_CSPI1_MOSI	0x8c
+#define MUX_CTL_CSPI1_MISO	0x8d
+#define MUX_CTL_CSPI1_SS0	0x8e
+#define MUX_CTL_CSPI1_SS1	0x8f
+#define MUX_CTL_STXD6		0x90
+#define MUX_CTL_SRXD6		0x91
+#define MUX_CTL_SCK6		0x92
+#define MUX_CTL_SFS6		0x93
+
+#define MUX_CTL_STXD3		0x9C
+#define MUX_CTL_SRXD3		0x9D
+#define MUX_CTL_SCK3		0x9E
+#define MUX_CTL_SFS3		0x9F
+
+#define MUX_CTL_NFC_WP		0xD0
+#define MUX_CTL_NFC_CE		0xD1
+#define MUX_CTL_NFC_RB		0xD2
+#define MUX_CTL_NFC_WE		0xD4
+#define MUX_CTL_NFC_RE		0xD5
+#define MUX_CTL_NFC_ALE		0xD6
+#define MUX_CTL_NFC_CLE		0xD7
+
+
+#define MUX_CTL_CAPTURE		0x150
+#define MUX_CTL_COMPARE		0x151
+
+/*
+ * Helper macros for the MUX_[contact name]__[pin function] macros
+ */
+#define IOMUX_MODE_POS 9
+#define IOMUX_MODE(contact, mode) (((mode) << IOMUX_MODE_POS) | (contact))
+
+/*
+ * These macros can be used in mx31_gpio_mux() and have the form
+ * MUX_[contact name]__[pin function]
+ */
+#define MUX_RXD1__UART1_RXD_MUX	IOMUX_MODE(MUX_CTL_RXD1, MUX_CTL_FUNC)
+#define MUX_TXD1__UART1_TXD_MUX	IOMUX_MODE(MUX_CTL_TXD1, MUX_CTL_FUNC)
+#define MUX_RTS1__UART1_RTS_B	IOMUX_MODE(MUX_CTL_RTS1, MUX_CTL_FUNC)
+#define MUX_CTS1__UART1_CTS_B	IOMUX_MODE(MUX_CTL_CTS1, MUX_CTL_FUNC)
+
+#define MUX_RXD2__UART2_RXD_MUX	IOMUX_MODE(MUX_CTL_RXD2, MUX_CTL_FUNC)
+#define MUX_TXD2__UART2_TXD_MUX	IOMUX_MODE(MUX_CTL_TXD2, MUX_CTL_FUNC)
+#define MUX_RTS2__UART2_RTS_B	IOMUX_MODE(MUX_CTL_RTS2, MUX_CTL_FUNC)
+#define MUX_CTS2__UART2_CTS_B	IOMUX_MODE(MUX_CTL_CTS2, MUX_CTL_FUNC)
+
+#define MUX_CSPI2_SS0__CSPI2_SS0_B IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_FUNC)
+#define MUX_CSPI2_SS1__CSPI2_SS1_B IOMUX_MODE(MUX_CTL_CSPI2_SS1, MUX_CTL_FUNC)
+#define MUX_CSPI2_SS2__CSPI2_SS2_B IOMUX_MODE(MUX_CTL_CSPI2_SS2, MUX_CTL_FUNC)
+#define MUX_CSPI2_MOSI__CSPI2_MOSI IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_FUNC)
+#define MUX_CSPI2_MISO__CSPI2_MISO IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_FUNC)
+#define MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B \
+	IOMUX_MODE(MUX_CTL_CSPI2_SPI_RDY, MUX_CTL_FUNC)
+#define MUX_CSPI2_SCLK__CSPI2_CLK IOMUX_MODE(MUX_CTL_CSPI2_SCLK, MUX_CTL_FUNC)
+
+#define MUX_CSPI1_SS0__CSPI1_SS0_B IOMUX_MODE(MUX_CTL_CSPI1_SS0, MUX_CTL_FUNC)
+#define MUX_CSPI1_SS1__CSPI1_SS1_B IOMUX_MODE(MUX_CTL_CSPI1_SS1, MUX_CTL_FUNC)
+#define MUX_CSPI1_SS2__CSPI1_SS2_B IOMUX_MODE(MUX_CTL_CSPI1_SS2, MUX_CTL_FUNC)
+#define MUX_CSPI1_MOSI__CSPI1_MOSI IOMUX_MODE(MUX_CTL_CSPI1_MOSI, MUX_CTL_FUNC)
+#define MUX_CSPI1_MISO__CSPI1_MISO IOMUX_MODE(MUX_CTL_CSPI1_MISO, MUX_CTL_FUNC)
+#define MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B \
+	IOMUX_MODE(MUX_CTL_CSPI1_SPI_RDY, MUX_CTL_FUNC)
+#define MUX_CSPI1_SCLK__CSPI1_CLK IOMUX_MODE(MUX_CTL_CSPI1_SCLK, MUX_CTL_FUNC)
+
+#define MUX_CSPI2_MOSI__I2C2_SCL IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_ALT1)
+#define MUX_CSPI2_MISO__I2C2_SDA IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_ALT1)
+
+/* PAD control registers for SDR/DDR */
+#define IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B	(IOMUXC_BASE + 0x26C)
+#define IOMUXC_SW_PAD_CTL_CAS_SDWE_SDCKE0	(IOMUXC_BASE + 0x270)
+#define IOMUXC_SW_PAD_CTL_BCLK_RW_RAS		(IOMUXC_BASE + 0x274)
+#define IOMUXC_SW_PAD_CTL_CS5_ECB_LBA		(IOMUXC_BASE + 0x278)
+#define IOMUXC_SW_PAD_CTL_CS2_CS3_CS4		(IOMUXC_BASE + 0x27C)
+#define IOMUXC_SW_PAD_CTL_OE_CS0_CS1		(IOMUXC_BASE + 0x280)
+#define IOMUXC_SW_PAD_CTL_DQM3_EB0_EB1		(IOMUXC_BASE + 0x284)
+#define IOMUXC_SW_PAD_CTL_DQM0_DQM1_DQM2	(IOMUXC_BASE + 0x288)
+#define IOMUXC_SW_PAD_CTL_SD29_SD30_SD31	(IOMUXC_BASE + 0x28C)
+#define IOMUXC_SW_PAD_CTL_SD26_SD27_SD28	(IOMUXC_BASE + 0x290)
+#define IOMUXC_SW_PAD_CTL_SD23_SD24_SD25	(IOMUXC_BASE + 0x294)
+#define IOMUXC_SW_PAD_CTL_SD20_SD21_SD22	(IOMUXC_BASE + 0x298)
+#define IOMUXC_SW_PAD_CTL_SD17_SD18_SD19	(IOMUXC_BASE + 0x29C)
+#define IOMUXC_SW_PAD_CTL_SD14_SD15_SD16	(IOMUXC_BASE + 0x2A0)
+#define IOMUXC_SW_PAD_CTL_SD11_SD12_SD13	(IOMUXC_BASE + 0x2A4)
+#define IOMUXC_SW_PAD_CTL_SD8_SD9_SD10		(IOMUXC_BASE + 0x2A8)
+#define IOMUXC_SW_PAD_CTL_SD5_SD6_SD7		(IOMUXC_BASE + 0x2AC)
+#define IOMUXC_SW_PAD_CTL_SD2_SD3_SD4		(IOMUXC_BASE + 0x2B0)
+#define IOMUXC_SW_PAD_CTL_SDBA0_SD0_SD1		(IOMUXC_BASE + 0x2B4)
+#define IOMUXC_SW_PAD_CTL_A24_A25_SDBA1		(IOMUXC_BASE + 0x2B8)
+#define IOMUXC_SW_PAD_CTL_A21_A22_A23		(IOMUXC_BASE + 0x2BC)
+#define IOMUXC_SW_PAD_CTL_A18_A19_A20		(IOMUXC_BASE + 0x2C0)
+#define IOMUXC_SW_PAD_CTL_A15_A16_A17		(IOMUXC_BASE + 0x2C4)
+#define IOMUXC_SW_PAD_CTL_A12_A13_A14		(IOMUXC_BASE + 0x2C8)
+#define IOMUXC_SW_PAD_CTL_A10_MA10_A11		(IOMUXC_BASE + 0x2CC)
+#define IOMUXC_SW_PAD_CTL_A7_A8_A9		(IOMUXC_BASE + 0x2D0)
+#define IOMUXC_SW_PAD_CTL_A4_A5_A6		(IOMUXC_BASE + 0x2D4)
+#define IOMUXC_SW_PAD_CTL_A1_A2_A3		(IOMUXC_BASE + 0x2D8)
+#define IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0		(IOMUXC_BASE + 0x2DC)
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE	0x70000000
+#define CSD0_BASE	0x80000000
+#define CSD1_BASE	0x90000000
+#define CS0_BASE	0xA0000000
+#define CS1_BASE	0xA8000000
+#define CS2_BASE	0xB0000000
+#define CS3_BASE	0xB2000000
+#define CS4_BASE	0xB4000000
+#define CS4_PSRAM_BASE	0xB5000000
+#define CS5_BASE	0xB6000000
+#define PCMCIA_MEM_BASE	0xC0000000
+
+/*
+ * NAND controller
+ */
+#define NFC_BASE_ADDR	0xB8000000
+
+/* SD card controller */
+#define SDHC1_BASE_ADDR	0x50004000
+#define SDHC2_BASE_ADDR	0x50008000
+
+/*
+ * Internal RAM (16KB)
+ */
+#define	IRAM_BASE_ADDR	0x1FFFC000
+#define IRAM_SIZE	(16 * 1024)
+
+#define MX31_AIPS1_BASE_ADDR	0x43f00000
+#define IMX_USB_BASE		(MX31_AIPS1_BASE_ADDR + 0x88000)
+#define IMX_USB_PORT_OFFSET	0x200
+
+/*
+ * CSPI register definitions
+ */
+#define MXC_SPI_BASE_ADDRESSES \
+	0x43fa4000, \
+	0x50010000, \
+	0x53f84000,
+
+/*
+ * Generic timer support
+ */
+#ifdef CONFIG_MX31_CLK32
+#define	CONFIG_SYS_TIMER_RATE	CONFIG_MX31_CLK32
+#else
+#define	CONFIG_SYS_TIMER_RATE	32768
+#endif
+
+#endif /* __ASM_ARCH_MX31_IMX_REGS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx31/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-mx31/sys_proto.h
new file mode 100644
index 000000000..29fc0fda0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx31/sys_proto.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Helmut Raiger, HALE electronic GmbH, helmut.raiger@hale.at
+ */
+
+#ifndef _MX31_SYS_PROTO_H_
+#define _MX31_SYS_PROTO_H_
+
+#include <asm/mach-imx/sys_proto.h>
+
+struct mxc_weimcs {
+	u32 upper;
+	u32 lower;
+	u32 additional;
+};
+
+void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs);
+int mxc_mmc_init(struct bd_info *bis);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx35/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mx35/clock.h
new file mode 100644
index 000000000..cb0b53a69
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx35/clock.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#ifdef CONFIG_MX35_HCLK_FREQ
+#define MXC_HCLK	CONFIG_MX35_HCLK_FREQ
+#else
+#define MXC_HCLK	24000000
+#endif
+
+#ifdef CONFIG_MX35_CLK32
+#define MXC_CLK32	CONFIG_MX35_CLK32
+#else
+#define MXC_CLK32	32768
+#endif
+
+enum mxc_clock {
+	MXC_ARM_CLK,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_IPG_PERCLK,
+	MXC_UART_CLK,
+	MXC_ESDHC1_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_ESDHC3_CLK,
+	MXC_USB_CLK,
+	MXC_CSPI_CLK,
+	MXC_FEC_CLK,
+	MXC_I2C_CLK,
+};
+
+enum mxc_main_clock {
+	CPU_CLK,
+	AHB_CLK,
+	IPG_CLK,
+	IPG_PER_CLK,
+	NFC_CLK,
+	USB_CLK,
+	HSP_CLK,
+};
+
+enum mxc_peri_clock {
+	UART1_BAUD,
+	UART2_BAUD,
+	UART3_BAUD,
+	SSI1_BAUD,
+	SSI2_BAUD,
+	CSI_BAUD,
+	MSHC_CLK,
+	ESDHC1_CLK,
+	ESDHC2_CLK,
+	ESDHC3_CLK,
+	SPDIF_CLK,
+	SPI1_CLK,
+	SPI2_CLK,
+};
+
+u32 imx_get_uartclk(void);
+u32 imx_get_fecclk(void);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx35/crm_regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx35/crm_regs.h
new file mode 100644
index 000000000..fc65a3ad3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx35/crm_regs.h
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __CPU_ARM1136_MX35_CRM_REGS_H__
+#define __CPU_ARM1136_MX35_CRM_REGS_H__
+
+/* Register bit definitions */
+#define MXC_CCM_CCMR_WFI                        (1 << 30)
+#define MXC_CCM_CCMR_STBY_EXIT_SRC              (1 << 29)
+#define MXC_CCM_CCMR_VSTBY                      (1 << 28)
+#define MXC_CCM_CCMR_WBEN                       (1 << 27)
+#define MXC_CCM_CCMR_VOL_RDY_CNT_OFFSET        20
+#define MXC_CCM_CCMR_VOL_RDY_CNT_MASK          (0xF << 20)
+#define MXC_CCM_CCMR_ROMW_OFFSET               18
+#define MXC_CCM_CCMR_ROMW_MASK                 (0x3 << 18)
+#define MXC_CCM_CCMR_RAMW_OFFSET               16
+#define MXC_CCM_CCMR_RAMW_MASK                 (0x3 << 16)
+#define MXC_CCM_CCMR_LPM_OFFSET                 14
+#define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
+#define MXC_CCM_CCMR_UPE                        (1 << 9)
+#define MXC_CCM_CCMR_MPE                        (1 << 3)
+
+#define MXC_CCM_PDR0_PER_SEL			(1 << 26)
+#define MXC_CCM_PDR0_IPU_HND_BYP                (1 << 23)
+#define MXC_CCM_PDR0_HSP_PODF_OFFSET            20
+#define MXC_CCM_PDR0_HSP_PODF_MASK              (0x3 << 20)
+#define MXC_CCM_PDR0_CON_MUX_DIV_OFFSET		16
+#define MXC_CCM_PDR0_CON_MUX_DIV_MASK           (0xF << 16)
+#define MXC_CCM_PDR0_CKIL_SEL			(1 << 15)
+#define MXC_CCM_PDR0_PER_PODF_OFFSET            12
+#define MXC_CCM_PDR0_PER_PODF_MASK              (0x7 << 12)
+#define MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET        9
+#define MXC_CCM_PDR0_AUTO_MUX_DIV_MASK          (0x7 << 9)
+#define MXC_CCM_PDR0_AUTO_CON	                0x1
+
+#define MXC_CCM_PDR1_MSHC_PRDF_OFFSET           28
+#define MXC_CCM_PDR1_MSHC_PRDF_MASK             (0x7 << 28)
+#define MXC_CCM_PDR1_MSHC_PODF_OFFSET           22
+#define MXC_CCM_PDR1_MSHC_PODF_MASK             (0x3F << 22)
+#define MXC_CCM_PDR1_MSHC_M_U			(1 << 7)
+
+#define MXC_CCM_PDR2_SSI2_PRDF_OFFSET           27
+#define MXC_CCM_PDR2_SSI2_PRDF_MASK             (0x7 << 27)
+#define MXC_CCM_PDR2_SSI1_PRDF_OFFSET           24
+#define MXC_CCM_PDR2_SSI1_PRDF_MASK             (0x7 << 24)
+#define MXC_CCM_PDR2_CSI_PODF_OFFSET            16
+#define MXC_CCM_PDR2_CSI_PODF_MASK              (0x3F << 16)
+#define MXC_CCM_PDR2_SSI2_PODF_OFFSET           8
+#define MXC_CCM_PDR2_SSI2_PODF_MASK             (0x3F << 8)
+#define MXC_CCM_PDR2_CSI_M_U			(1 << 7)
+#define MXC_CCM_PDR2_SSI_M_U			(1 << 6)
+#define MXC_CCM_PDR2_SSI1_PODF_OFFSET           0
+#define MXC_CCM_PDR2_SSI1_PODF_MASK             (0x3F)
+
+#define MXC_CCM_PDR3_SPDIF_PRDF_OFFSET          29
+#define MXC_CCM_PDR3_SPDIF_PRDF_MASK            (0x7 << 29)
+#define MXC_CCM_PDR3_SPDIF_PODF_OFFSET          23
+#define MXC_CCM_PDR3_SPDIF_PODF_MASK            (0x3F << 23)
+#define MXC_CCM_PDR3_SPDIF_M_U			(1 << 22)
+#define MXC_CCM_PDR3_ESDHC3_PODF_OFFSET         16
+#define MXC_CCM_PDR3_ESDHC3_PODF_MASK           (0x3F << 16)
+#define MXC_CCM_PDR3_UART_M_U			(1 << 14)
+#define MXC_CCM_PDR3_ESDHC2_PODF_OFFSET         8
+#define MXC_CCM_PDR3_ESDHC2_PODF_MASK           (0x3F << 8)
+#define MXC_CCM_PDR3_ESDHC_M_U			(1 << 6)
+#define MXC_CCM_PDR3_ESDHC1_PODF_OFFSET         0
+#define MXC_CCM_PDR3_ESDHC1_PODF_MASK           (0x3F)
+
+#define MXC_CCM_PDR4_NFC_PODF_OFFSET		28
+#define MXC_CCM_PDR4_NFC_PODF_MASK		(0xF << 28)
+#define MXC_CCM_PDR4_USB_PODF_OFFSET		22
+#define MXC_CCM_PDR4_USB_PODF_MASK		(0x3F << 22)
+#define MXC_CCM_PDR4_PER0_PODF_OFFSET		16
+#define MXC_CCM_PDR4_PER0_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_PDR4_UART_PODF_OFFSET		10
+#define MXC_CCM_PDR4_UART_PODF_MASK		(0x3F << 10)
+#define MXC_CCM_PDR4_USB_M_U			(1 << 9)
+
+/* Bit definitions for RCSR */
+#define MXC_CCM_RCSR_BUS_WIDTH			(1 << 29)
+#define MXC_CCM_RCSR_BUS_16BIT			(1 << 29)
+#define MXC_CCM_RCSR_PAGE_SIZE			(3 << 27)
+#define MXC_CCM_RCSR_PAGE_512			(0 << 27)
+#define MXC_CCM_RCSR_PAGE_2K			(1 << 27)
+#define MXC_CCM_RCSR_PAGE_4K1			(2 << 27)
+#define MXC_CCM_RCSR_PAGE_4K2			(3 << 27)
+#define MXC_CCM_RCSR_SOFT_RESET			(1 << 15)
+#define MXC_CCM_RCSR_NF16B			(1 << 14)
+#define MXC_CCM_RCSR_NFC_4K			(1 << 9)
+#define MXC_CCM_RCSR_NFC_FMS			(1 << 8)
+
+/* Bit definitions for both MCU, PERIPHERAL PLL control registers */
+#define MXC_CCM_PCTL_BRM                        0x80000000
+#define MXC_CCM_PCTL_PD_OFFSET                  26
+#define MXC_CCM_PCTL_PD_MASK                    (0xF << 26)
+#define MXC_CCM_PCTL_MFD_OFFSET                 16
+#define MXC_CCM_PCTL_MFD_MASK                   (0x3FF << 16)
+#define MXC_CCM_PCTL_MFI_OFFSET                 10
+#define MXC_CCM_PCTL_MFI_MASK                   (0xF << 10)
+#define MXC_CCM_PCTL_MFN_OFFSET                 0
+#define MXC_CCM_PCTL_MFN_MASK                   0x3FF
+
+/* Bit definitions for Audio clock mux register*/
+#define MXC_CCM_ACMR_ESAI_CLK_SEL_OFFSET	12
+#define MXC_CCM_ACMR_ESAI_CLK_SEL_MASK		(0xF << 12)
+#define MXC_CCM_ACMR_SPDIF_CLK_SEL_OFFSET	8
+#define MXC_CCM_ACMR_SPDIF_CLK_SEL_MASK		(0xF << 8)
+#define MXC_CCM_ACMR_SSI1_CLK_SEL_OFFSET	4
+#define MXC_CCM_ACMR_SSI1_CLK_SEL_MASK		(0xF << 4)
+#define MXC_CCM_ACMR_SSI2_CLK_SEL_OFFSET	0
+#define MXC_CCM_ACMR_SSI2_CLK_SEL_MASK		(0xF << 0)
+
+/* Bit definitions for Clock gating Register*/
+#define MXC_CCM_CGR_CG_MASK			0x3
+#define MXC_CCM_CGR_CG_OFF			0x0
+#define MXC_CCM_CGR_CG_RUN_ON			0x1
+#define MXC_CCM_CGR_CG_RUN_WAIT_ON		0x2
+#define MXC_CCM_CGR_CG_ON			0x3
+
+#define MXC_CCM_CGR0_ASRC_OFFSET		0
+#define MXC_CCM_CGR0_ASRC_MASK			(0x3 << 0)
+#define MXC_CCM_CGR0_ATA_OFFSET			2
+#define MXC_CCM_CGR0_ATA_MASK			(0x3 << 2)
+#define MXC_CCM_CGR0_CAN1_OFFSET		6
+#define MXC_CCM_CGR0_CAN1_MASK			(0x3 << 6)
+#define MXC_CCM_CGR0_CAN2_OFFSET		8
+#define MXC_CCM_CGR0_CAN2_MASK			(0x3 << 8)
+#define MXC_CCM_CGR0_CSPI1_OFFSET		10
+#define MXC_CCM_CGR0_CSPI1_MASK			(0x3 << 10)
+#define MXC_CCM_CGR0_CSPI2_OFFSET		12
+#define MXC_CCM_CGR0_CSPI2_MASK			(0x3 << 12)
+#define MXC_CCM_CGR0_ECT_OFFSET			14
+#define MXC_CCM_CGR0_ECT_MASK			(0x3 << 14)
+#define MXC_CCM_CGR0_EDIO_OFFSET		16
+#define MXC_CCM_CGR0_EDIO_MASK			(0x3 << 16)
+#define MXC_CCM_CGR0_EMI_OFFSET			18
+#define MXC_CCM_CGR0_EMI_MASK			(0x3 << 18)
+#define MXC_CCM_CGR0_EPIT1_OFFSET		20
+#define MXC_CCM_CGR0_EPIT1_MASK			(0x3 << 20)
+#define MXC_CCM_CGR0_EPIT2_OFFSET		22
+#define MXC_CCM_CGR0_EPIT2_MASK			(0x3 << 22)
+#define MXC_CCM_CGR0_ESAI_OFFSET		24
+#define MXC_CCM_CGR0_ESAI_MASK			(0x3 << 24)
+#define MXC_CCM_CGR0_ESDHC1_OFFSET		26
+#define MXC_CCM_CGR0_ESDHC1_MASK		(0x3 << 26)
+#define MXC_CCM_CGR0_ESDHC2_OFFSET		28
+#define MXC_CCM_CGR0_ESDHC2_MASK		(0x3 << 28)
+#define MXC_CCM_CGR0_ESDHC3_OFFSET		30
+#define MXC_CCM_CGR0_ESDHC3_MASK		(0x3 << 30)
+
+#define MXC_CCM_CGR1_FEC_OFFSET			0
+#define MXC_CCM_CGR1_FEC_MASK			(0x3 << 0)
+#define MXC_CCM_CGR1_GPIO1_OFFSET		2
+#define MXC_CCM_CGR1_GPIO1_MASK			(0x3 << 2)
+#define MXC_CCM_CGR1_GPIO2_OFFSET		4
+#define MXC_CCM_CGR1_GPIO2_MASK			(0x3 << 4)
+#define MXC_CCM_CGR1_GPIO3_OFFSET		6
+#define MXC_CCM_CGR1_GPIO3_MASK			(0x3 << 6)
+#define MXC_CCM_CGR1_GPT_OFFSET			8
+#define MXC_CCM_CGR1_GPT_MASK			(0x3 << 8)
+#define MXC_CCM_CGR1_I2C1_OFFSET		10
+#define MXC_CCM_CGR1_I2C1_MASK			(0x3 << 10)
+#define MXC_CCM_CGR1_I2C2_OFFSET		12
+#define MXC_CCM_CGR1_I2C2_MASK			(0x3 << 12)
+#define MXC_CCM_CGR1_I2C3_OFFSET		14
+#define MXC_CCM_CGR1_I2C3_MASK			(0x3 << 14)
+#define MXC_CCM_CGR1_IOMUXC_OFFSET		16
+#define MXC_CCM_CGR1_IOMUXC_MASK		(0x3 << 16)
+#define MXC_CCM_CGR1_IPU_OFFSET			18
+#define MXC_CCM_CGR1_IPU_MASK			(0x3 << 18)
+#define MXC_CCM_CGR1_KPP_OFFSET			20
+#define MXC_CCM_CGR1_KPP_MASK			(0x3 << 20)
+#define MXC_CCM_CGR1_MLB_OFFSET			22
+#define MXC_CCM_CGR1_MLB_MASK			(0x3 << 22)
+#define MXC_CCM_CGR1_MSHC_OFFSET		24
+#define MXC_CCM_CGR1_MSHC_MASK			(0x3 << 24)
+#define MXC_CCM_CGR1_OWIRE_OFFSET		26
+#define MXC_CCM_CGR1_OWIRE_MASK			(0x3 << 26)
+#define MXC_CCM_CGR1_PWM_OFFSET			28
+#define MXC_CCM_CGR1_PWM_MASK			(0x3 << 28)
+#define MXC_CCM_CGR1_RNGC_OFFSET		30
+#define MXC_CCM_CGR1_RNGC_MASK			(0x3 << 30)
+
+#define MXC_CCM_CGR2_RTC_OFFSET			0
+#define MXC_CCM_CGR2_RTC_MASK			(0x3 << 0)
+#define MXC_CCM_CGR2_RTIC_OFFSET		2
+#define MXC_CCM_CGR2_RTIC_MASK			(0x3 << 2)
+#define MXC_CCM_CGR2_SCC_OFFSET			4
+#define MXC_CCM_CGR2_SCC_MASK			(0x3 << 4)
+#define MXC_CCM_CGR2_SDMA_OFFSET		6
+#define MXC_CCM_CGR2_SDMA_MASK			(0x3 << 6)
+#define MXC_CCM_CGR2_SPBA_OFFSET		8
+#define MXC_CCM_CGR2_SPBA_MASK			(0x3 << 8)
+#define MXC_CCM_CGR2_SPDIF_OFFSET		10
+#define MXC_CCM_CGR2_SPDIF_MASK			(0x3 << 10)
+#define MXC_CCM_CGR2_SSI1_OFFSET		12
+#define MXC_CCM_CGR2_SSI1_MASK			(0x3 << 12)
+#define MXC_CCM_CGR2_SSI2_OFFSET		14
+#define MXC_CCM_CGR2_SSI2_MASK			(0x3 << 14)
+#define MXC_CCM_CGR2_UART1_OFFSET		16
+#define MXC_CCM_CGR2_UART1_MASK			(0x3 << 16)
+#define MXC_CCM_CGR2_UART2_OFFSET		18
+#define MXC_CCM_CGR2_UART2_MASK			(0x3 << 18)
+#define MXC_CCM_CGR2_UART3_OFFSET		20
+#define MXC_CCM_CGR2_UART3_MASK			(0x3 << 20)
+#define MXC_CCM_CGR2_USBOTG_OFFSET		22
+#define MXC_CCM_CGR2_USBOTG_MASK		(0x3 << 22)
+#define MXC_CCM_CGR2_WDOG_OFFSET		24
+#define MXC_CCM_CGR2_WDOG_MASK			(0x3 << 24)
+#define MXC_CCM_CGR2_MAX_OFFSET			26
+#define MXC_CCM_CGR2_MAX_MASK			(0x3 << 26)
+#define MXC_CCM_CGR2_MAX_ENABLE			(0x2 << 26)
+#define MXC_CCM_CGR2_AUDMUX_OFFSET		30
+#define MXC_CCM_CGR2_AUDMUX_MASK		(0x3 << 30)
+
+#define MXC_CCM_CGR3_CSI_OFFSET			0
+#define MXC_CCM_CGR3_CSI_MASK			(0x3 << 0)
+#define MXC_CCM_CGR3_IIM_OFFSET			2
+#define MXC_CCM_CGR3_IIM_MASK			(0x3 << 2)
+#define MXC_CCM_CGR3_GPU2D_OFFSET		4
+#define MXC_CCM_CGR3_GPU2D_MASK			(0x3 << 4)
+
+#define MXC_CCM_COSR_CLKOSEL_MASK		0x1F
+#define MXC_CCM_COSR_CLKOSEL_OFFSET		0
+#define MXC_CCM_COSR_CLKOEN			(1 << 5)
+#define MXC_CCM_COSR_CLKOUTDIV_1		(1 << 6)
+#define MXC_CCM_COSR_CLKOUT_DIV_MASK		(0x3F << 10)
+#define MXC_CCM_COSR_CLKOUT_DIV_OFFSET		10
+#define MXC_CCM_COSR_SSI1_RX_SRC_SEL_MASK	(0x3 << 16)
+#define MXC_CCM_COSR_SSI1_RX_SRC_SEL_OFFSET	16
+#define MXC_CCM_COSR_SSI1_TX_SRC_SEL_MASK	(0x3 << 18)
+#define MXC_CCM_COSR_SSI1_TX_SRC_SEL_OFFSET	18
+#define MXC_CCM_COSR_SSI2_RX_SRC_SEL_MASK	(0x3 << 20)
+#define MXC_CCM_COSR_SSI2_RX_SRC_SEL_OFFSET	20
+#define MXC_CCM_COSR_SSI2_TX_SRC_SEL_MASK	(0x3 << 22)
+#define MXC_CCM_COSR_SSI2_TX_SRC_SEL_OFFSET	22
+#define MXC_CCM_COSR_ASRC_AUDIO_EN		(1 << 24)
+#define MXC_CCM_COSR_ASRC_AUDIO_PODF_MASK	(0x3F << 26)
+#define MXC_CCM_COSR_ASRC_AUDIO_PODF_OFFSET	26
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx35/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mx35/gpio.h
new file mode 100644
index 000000000..b3d36394a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx35/gpio.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ */
+
+
+#ifndef __ASM_ARCH_MX35_GPIO_H
+#define __ASM_ARCH_MX35_GPIO_H
+
+#include <asm/mach-imx/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx35/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx35/imx-regs.h
new file mode 100644
index 000000000..35090047c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -0,0 +1,356 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_MX35_H
+#define __ASM_ARCH_MX35_H
+
+#define ARCH_MXC
+
+/*
+ * IRAM
+ */
+#define IRAM_BASE_ADDR		0x10000000	/* internal ram */
+#define IRAM_SIZE		0x00020000	/* 128 KB */
+
+#define LOW_LEVEL_SRAM_STACK	0x1001E000
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR         0x43F00000
+#define AIPS1_CTRL_BASE_ADDR    AIPS1_BASE_ADDR
+#define MAX_BASE_ADDR           0x43F04000
+#define EVTMON_BASE_ADDR        0x43F08000
+#define CLKCTL_BASE_ADDR        0x43F0C000
+#define I2C1_BASE_ADDR		0x43F80000
+#define I2C3_BASE_ADDR          0x43F84000
+#define ATA_BASE_ADDR           0x43F8C000
+#define UART1_BASE		0x43F90000
+#define UART2_BASE		0x43F94000
+#define I2C2_BASE_ADDR          0x43F98000
+#define CSPI1_BASE_ADDR         0x43FA4000
+#define IOMUXC_BASE_ADDR        0x43FAC000
+
+/*
+ * SPBA
+ */
+#define SPBA_BASE_ADDR          0x50000000
+#define UART3_BASE		0x5000C000
+#define CSPI2_BASE_ADDR         0x50010000
+#define ATA_DMA_BASE_ADDR       0x50020000
+#define FEC_BASE_ADDR           0x50038000
+#define SPBA_CTRL_BASE_ADDR     0x5003C000
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR         0x53F00000
+#define AIPS2_CTRL_BASE_ADDR    AIPS2_BASE_ADDR
+#define CCM_BASE_ADDR           0x53F80000
+#define GPT1_BASE_ADDR          0x53F90000
+#define EPIT1_BASE_ADDR         0x53F94000
+#define EPIT2_BASE_ADDR         0x53F98000
+#define GPIO3_BASE_ADDR         0x53FA4000
+#define MMC_SDHC1_BASE_ADDR	0x53FB4000
+#define MMC_SDHC2_BASE_ADDR	0x53FB8000
+#define MMC_SDHC3_BASE_ADDR	0x53FBC000
+#define IPU_CTRL_BASE_ADDR	0x53FC0000
+#define GPIO1_BASE_ADDR		0x53FCC000
+#define GPIO2_BASE_ADDR		0x53FD0000
+#define SDMA_BASE_ADDR		0x53FD4000
+#define RTC_BASE_ADDR		0x53FD8000
+#define WDOG1_BASE_ADDR		0x53FDC000
+#define PWM_BASE_ADDR		0x53FE0000
+#define RTIC_BASE_ADDR		0x53FEC000
+#define IIM_BASE_ADDR		0x53FF0000
+#define IMX_USB_BASE		0x53FF4000
+#define IMX_USB_PORT_OFFSET	0x400
+
+#define IMX_CCM_BASE		CCM_BASE_ADDR
+
+/*
+ * ROMPATCH and AVIC
+ */
+#define ROMPATCH_BASE_ADDR	0x60000000
+#define AVIC_BASE_ADDR		0x68000000
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define EXT_MEM_CTRL_BASE	0xB8000000
+#define ESDCTL_BASE_ADDR	0xB8001000
+#define WEIM_BASE_ADDR		0xB8002000
+#define WEIM_CTRL_CS0		WEIM_BASE_ADDR
+#define WEIM_CTRL_CS1		(WEIM_BASE_ADDR + 0x10)
+#define WEIM_CTRL_CS2		(WEIM_BASE_ADDR + 0x20)
+#define WEIM_CTRL_CS3		(WEIM_BASE_ADDR + 0x30)
+#define WEIM_CTRL_CS4		(WEIM_BASE_ADDR + 0x40)
+#define WEIM_CTRL_CS5		(WEIM_BASE_ADDR + 0x50)
+#define M3IF_BASE_ADDR		0xB8003000
+#define EMI_BASE_ADDR		0xB8004000
+
+#define NFC_BASE_ADDR		0xBB000000
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR	0x70000000
+#define CSD0_BASE_ADDR		0x80000000
+#define CSD1_BASE_ADDR		0x90000000
+#define CS0_BASE_ADDR		0xA0000000
+#define CS1_BASE_ADDR		0xA8000000
+#define CS2_BASE_ADDR		0xB0000000
+#define CS3_BASE_ADDR		0xB2000000
+#define CS4_BASE_ADDR		0xB4000000
+#define CS5_BASE_ADDR		0xB6000000
+
+/*
+ * IRQ Controller Register Definitions.
+ */
+#define AVIC_NIMASK		0x04
+#define AVIC_INTTYPEH		0x18
+#define AVIC_INTTYPEL		0x1C
+
+/* L210 */
+#define L2CC_BASE_ADDR		0x30000000
+#define L2_CACHE_LINE_SIZE		32
+#define L2_CACHE_CTL_REG		0x100
+#define L2_CACHE_AUX_CTL_REG		0x104
+#define L2_CACHE_SYNC_REG		0x730
+#define L2_CACHE_INV_LINE_REG		0x770
+#define L2_CACHE_INV_WAY_REG		0x77C
+#define L2_CACHE_CLEAN_LINE_REG		0x7B0
+#define L2_CACHE_CLEAN_INV_LINE_REG	0x7F0
+#define L2_CACHE_DBG_CTL_REG		0xF40
+
+#define CLKMODE_AUTO		0
+#define CLKMODE_CONSUMER	1
+
+#define PLL_PD(x)		(((x) & 0xf) << 26)
+#define PLL_MFD(x)		(((x) & 0x3ff) << 16)
+#define PLL_MFI(x)		(((x) & 0xf) << 10)
+#define PLL_MFN(x)		(((x) & 0x3ff) << 0)
+
+#define _PLL_BRM(x)	((x) << 31)
+#define _PLL_PD(x)	(((x) - 1) << 26)
+#define _PLL_MFD(x)	(((x) - 1) << 16)
+#define _PLL_MFI(x)	((x) << 10)
+#define _PLL_MFN(x)	(x)
+#define _PLL_SETTING(brm, pd, mfd, mfi, mfn) \
+	(_PLL_BRM(brm) | _PLL_PD(pd) | _PLL_MFD(mfd) | _PLL_MFI(mfi) |\
+	 _PLL_MFN(mfn))
+
+#define CCM_MPLL_532_HZ	_PLL_SETTING(1, 1, 12, 11, 1)
+#define CCM_MPLL_399_HZ _PLL_SETTING(0, 1, 16, 8, 5)
+#define CCM_PPLL_300_HZ _PLL_SETTING(0, 1, 4, 6, 1)
+
+#define CSCR_U(x)	(WEIM_CTRL_CS#x + 0)
+#define CSCR_L(x)	(WEIM_CTRL_CS#x + 4)
+#define CSCR_A(x)	(WEIM_CTRL_CS#x + 8)
+
+#define IIM_SREV	0x24
+#define ROMPATCH_REV	0x40
+
+#define IPU_CONF	IPU_CTRL_BASE_ADDR
+
+#define IPU_CONF_PXL_ENDIAN	(1<<8)
+#define IPU_CONF_DU_EN		(1<<7)
+#define IPU_CONF_DI_EN		(1<<6)
+#define IPU_CONF_ADC_EN		(1<<5)
+#define IPU_CONF_SDC_EN		(1<<4)
+#define IPU_CONF_PF_EN		(1<<3)
+#define IPU_CONF_ROT_EN		(1<<2)
+#define IPU_CONF_IC_EN		(1<<1)
+#define IPU_CONF_CSI_EN		(1<<0)
+
+/*
+ * CSPI register definitions
+ */
+#define MXC_SPI_BASE_ADDRESSES \
+	0x43fa4000, \
+	0x50010000,
+
+#define GPIO_PORT_NUM		3
+#define GPIO_NUM_PIN		32
+
+#define CHIP_REV_1_0		0x10
+#define CHIP_REV_2_0		0x20
+
+#define BOARD_REV_1_0		0x0
+#define BOARD_REV_2_0		0x1
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+/* Clock Control Module (CCM) registers */
+struct ccm_regs {
+	u32 ccmr;	/* Control */
+	u32 pdr0;	/* Post divider 0 */
+	u32 pdr1;	/* Post divider 1 */
+	u32 pdr2;	/* Post divider 2 */
+	u32 pdr3;	/* Post divider 3 */
+	u32 pdr4;	/* Post divider 4 */
+	u32 rcsr;	/* CCM Status */
+	u32 mpctl;	/* Core PLL Control */
+	u32 ppctl;	/* Peripheral PLL Control */
+	u32 acmr;	/* Audio clock mux */
+	u32 cosr;	/* Clock out source */
+	u32 cgr0;	/* Clock Gating Control 0 */
+	u32 cgr1;	/* Clock Gating Control 1 */
+	u32 cgr2;	/* Clock Gating Control 2 */
+	u32 cgr3;	/* Clock Gating Control 3 */
+	u32 reserved;
+	u32 dcvr0;	/* DPTC Comparator 0 */
+	u32 dcvr1;	/* DPTC Comparator 0 */
+	u32 dcvr2;	/* DPTC Comparator 0 */
+	u32 dcvr3;	/* DPTC Comparator 0 */
+	u32 ltr0;	/* Load Tracking 0 */
+	u32 ltr1;	/* Load Tracking 1 */
+	u32 ltr2;	/* Load Tracking 2 */
+	u32 ltr3;	/* Load Tracking 3 */
+	u32 ltbr0;	/* Load Tracking Buffer 0 */
+};
+
+/* IIM control registers */
+struct iim_regs {
+	u32 iim_stat;
+	u32 iim_statm;
+	u32 iim_err;
+	u32 iim_emask;
+	u32 iim_fctl;
+	u32 iim_ua;
+	u32 iim_la;
+	u32 iim_sdat;
+	u32 iim_prev;
+	u32 iim_srev;
+	u32 iim_prg_p;
+	u32 iim_scs0;
+	u32 iim_scs1;
+	u32 iim_scs2;
+	u32 iim_scs3;
+	u32 res1[0x1f1];
+	struct fuse_bank {
+		u32 fuse_regs[0x20];
+		u32 fuse_rsvd[0xe0];
+	} bank[3];
+};
+
+struct fuse_bank0_regs {
+	u32 fuse0_7[8];
+	u32 uid[8];
+	u32 fuse16_31[0x10];
+};
+
+struct fuse_bank1_regs {
+	u32 fuse0_21[0x16];
+	u32 usr;
+	u32 fuse23_31[9];
+};
+
+/* General Purpose Timer (GPT) registers */
+struct gpt_regs {
+	u32 ctrl;	/* control */
+	u32 pre;	/* prescaler */
+	u32 stat;	/* status */
+	u32 intr;	/* interrupt */
+	u32 cmp[3];	/* output compare 1-3 */
+	u32 capt[2];	/* input capture 1-2 */
+	u32 counter;	/* counter */
+};
+
+struct esdc_regs {
+	u32	esdctl0;
+	u32	esdcfg0;
+	u32	esdctl1;
+	u32	esdcfg1;
+	u32	esdmisc;
+	u32	reserved[4];
+	u32	esdcdly[5];
+	u32	esdcdlyl;
+};
+
+#define ESDC_MISC_RST		(1 << 1)
+#define ESDC_MISC_MDDR_EN	(1 << 2)
+#define ESDC_MISC_MDDR_DL_RST	(1 << 3)
+#define ESDC_MISC_DDR_EN	(1 << 8)
+#define ESDC_MISC_DDR2_EN	(1 << 9)
+
+/* Multi-Layer AHB Crossbar Switch (MAX) registers */
+struct max_regs {
+	u32 mpr0;
+	u32 pad00[3];
+	u32 sgpcr0;
+	u32 pad01[59];
+	u32 mpr1;
+	u32 pad02[3];
+	u32 sgpcr1;
+	u32 pad03[59];
+	u32 mpr2;
+	u32 pad04[3];
+	u32 sgpcr2;
+	u32 pad05[59];
+	u32 mpr3;
+	u32 pad06[3];
+	u32 sgpcr3;
+	u32 pad07[59];
+	u32 mpr4;
+	u32 pad08[3];
+	u32 sgpcr4;
+	u32 pad09[251];
+	u32 mgpcr0;
+	u32 pad10[63];
+	u32 mgpcr1;
+	u32 pad11[63];
+	u32 mgpcr2;
+	u32 pad12[63];
+	u32 mgpcr3;
+	u32 pad13[63];
+	u32 mgpcr4;
+	u32 pad14[63];
+	u32 mgpcr5;
+};
+
+/* AHB <-> IP-Bus Interface (AIPS) */
+struct aips_regs {
+	u32 mpr_0_7;
+	u32 mpr_8_15;
+	u32 pad0[6];
+	u32 pacr_0_7;
+	u32 pacr_8_15;
+	u32 pacr_16_23;
+	u32 pacr_24_31;
+	u32 pad1[4];
+	u32 opacr_0_7;
+	u32 opacr_8_15;
+	u32 opacr_16_23;
+	u32 opacr_24_31;
+	u32 opacr_32_39;
+};
+
+/*
+ * NFMS bit in RCSR register for pagesize of nandflash
+ */
+#define NFMS_BIT		8
+#define NFMS_NF_DWIDTH		14
+#define NFMS_NF_PG_SZ		8
+
+#define CCM_RCSR_NF_16BIT_SEL	(1 << 14)
+
+#endif
+
+/*
+ * Generic timer support
+ */
+#ifdef CONFIG_MX35_CLK32
+#define	CONFIG_SYS_TIMER_RATE	CONFIG_MX35_CLK32
+#else
+#define	CONFIG_SYS_TIMER_RATE	32768
+#endif
+
+#define CONFIG_SYS_TIMER_COUNTER	(GPT1_BASE_ADDR+36)
+
+#endif /* __ASM_ARCH_MX35_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx35/iomux-mx35.h b/roms/u-boot/arch/arm/include/asm/arch-mx35/iomux-mx35.h
new file mode 100644
index 000000000..f519c69fd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx35/iomux-mx35.h
@@ -0,0 +1,1259 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on mainline Linux i.MX iomux-mx35.h file:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ */
+
+#ifndef __IOMUX_MX35_H__
+#define __IOMUX_MX35_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
+ * See also iomux-v3.h
+ */
+
+/*									    PAD    MUX   ALT INPSE PATH PADCTRL */
+enum {
+	MX35_PAD_CAPTURE__GPT_CAPIN1				= IOMUX_PAD(0x328, 0x004, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CAPTURE__GPT_CMPOUT2				= IOMUX_PAD(0x328, 0x004, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CAPTURE__CSPI2_SS1				= IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL),
+	MX35_PAD_CAPTURE__EPIT1_EPITO				= IOMUX_PAD(0x328, 0x004, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CAPTURE__CCM_CLK32K				= IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL),
+	MX35_PAD_CAPTURE__GPIO1_4				= IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL),
+
+	MX35_PAD_COMPARE__GPT_CMPOUT1				= IOMUX_PAD(0x32c, 0x008, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_COMPARE__GPT_CAPIN2				= IOMUX_PAD(0x32c, 0x008, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_COMPARE__GPT_CMPOUT3				= IOMUX_PAD(0x32c, 0x008, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_COMPARE__EPIT2_EPITO				= IOMUX_PAD(0x32c, 0x008, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_COMPARE__GPIO1_5				= IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL),
+	MX35_PAD_COMPARE__SDMA_EXTDMA_2				= IOMUX_PAD(0x32c, 0x008, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_WDOG_RST__WDOG_WDOG_B				= IOMUX_PAD(0x330, 0x00c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			= IOMUX_PAD(0x330, 0x00c, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_WDOG_RST__GPIO1_6				= IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL),
+
+	MX35_PAD_GPIO1_0__GPIO1_0				= IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL),
+	MX35_PAD_GPIO1_0__CCM_PMIC_RDY				= IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL),
+	MX35_PAD_GPIO1_0__OWIRE_LINE				= IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL),
+	MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				= IOMUX_PAD(0x334, 0x010, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_GPIO1_1__GPIO1_1				= IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL),
+	MX35_PAD_GPIO1_1__PWM_PWMO				= IOMUX_PAD(0x338, 0x014, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_GPIO1_1__CSPI1_SS2				= IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL),
+	MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			= IOMUX_PAD(0x338, 0x014, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				= IOMUX_PAD(0x338, 0x014, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_GPIO2_0__GPIO2_0				= IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL),
+	MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			= IOMUX_PAD(0x33c, 0x018, 1, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_GPIO3_0__GPIO3_0				= IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL),
+	MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			= IOMUX_PAD(0x340, 0x01c, 1, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			= IOMUX_PAD(0x344, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_POR_B__CCM_POR_B				= IOMUX_PAD(0x348, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CLKO__CCM_CLKO					= IOMUX_PAD(0x34c, 0x020, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CLKO__GPIO1_8					= IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL),
+
+	MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			= IOMUX_PAD(0x350, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			= IOMUX_PAD(0x354, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			= IOMUX_PAD(0x358, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			= IOMUX_PAD(0x35c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		= IOMUX_PAD(0x360, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_VSTBY__CCM_VSTBY				= IOMUX_PAD(0x364, 0x024, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_VSTBY__GPIO1_7					= IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL),
+
+	MX35_PAD_A0__EMI_EIM_DA_L_0				= IOMUX_PAD(0x368, 0x028, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A1__EMI_EIM_DA_L_1				= IOMUX_PAD(0x36c, 0x02c, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A2__EMI_EIM_DA_L_2				= IOMUX_PAD(0x370, 0x030, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A3__EMI_EIM_DA_L_3				= IOMUX_PAD(0x374, 0x034, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A4__EMI_EIM_DA_L_4				= IOMUX_PAD(0x378, 0x038, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A5__EMI_EIM_DA_L_5				= IOMUX_PAD(0x37c, 0x03c, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A6__EMI_EIM_DA_L_6				= IOMUX_PAD(0x380, 0x040, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A7__EMI_EIM_DA_L_7				= IOMUX_PAD(0x384, 0x044, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A8__EMI_EIM_DA_H_8				= IOMUX_PAD(0x388, 0x048, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A9__EMI_EIM_DA_H_9				= IOMUX_PAD(0x38c, 0x04c, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A10__EMI_EIM_DA_H_10				= IOMUX_PAD(0x390, 0x050, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_MA10__EMI_MA10					= IOMUX_PAD(0x394, 0x054, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A11__EMI_EIM_DA_H_11				= IOMUX_PAD(0x398, 0x058, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A12__EMI_EIM_DA_H_12				= IOMUX_PAD(0x39c, 0x05c, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A13__EMI_EIM_DA_H_13				= IOMUX_PAD(0x3a0, 0x060, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A14__EMI_EIM_DA_H2_14				= IOMUX_PAD(0x3a4, 0x064, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A15__EMI_EIM_DA_H2_15				= IOMUX_PAD(0x3a8, 0x068, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A16__EMI_EIM_A_16				= IOMUX_PAD(0x3ac, 0x06c, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A17__EMI_EIM_A_17				= IOMUX_PAD(0x3b0, 0x070, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A18__EMI_EIM_A_18				= IOMUX_PAD(0x3b4, 0x074, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A19__EMI_EIM_A_19				= IOMUX_PAD(0x3b8, 0x078, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A20__EMI_EIM_A_20				= IOMUX_PAD(0x3bc, 0x07c, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A21__EMI_EIM_A_21				= IOMUX_PAD(0x3c0, 0x080, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A22__EMI_EIM_A_22				= IOMUX_PAD(0x3c4, 0x084, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A23__EMI_EIM_A_23				= IOMUX_PAD(0x3c8, 0x088, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A24__EMI_EIM_A_24				= IOMUX_PAD(0x3cc, 0x08c, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_A25__EMI_EIM_A_25				= IOMUX_PAD(0x3d0, 0x090, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDBA1__EMI_EIM_SDBA1				= IOMUX_PAD(0x3d4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDBA0__EMI_EIM_SDBA0				= IOMUX_PAD(0x3d8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD0__EMI_DRAM_D_0				= IOMUX_PAD(0x3dc, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD1__EMI_DRAM_D_1				= IOMUX_PAD(0x3e0, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD2__EMI_DRAM_D_2				= IOMUX_PAD(0x3e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD3__EMI_DRAM_D_3				= IOMUX_PAD(0x3e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD4__EMI_DRAM_D_4				= IOMUX_PAD(0x3ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD5__EMI_DRAM_D_5				= IOMUX_PAD(0x3f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD6__EMI_DRAM_D_6				= IOMUX_PAD(0x3f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD7__EMI_DRAM_D_7				= IOMUX_PAD(0x3f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD8__EMI_DRAM_D_8				= IOMUX_PAD(0x3fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD9__EMI_DRAM_D_9				= IOMUX_PAD(0x400, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD10__EMI_DRAM_D_10				= IOMUX_PAD(0x404, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD11__EMI_DRAM_D_11				= IOMUX_PAD(0x408, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD12__EMI_DRAM_D_12				= IOMUX_PAD(0x40c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD13__EMI_DRAM_D_13				= IOMUX_PAD(0x410, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD14__EMI_DRAM_D_14				= IOMUX_PAD(0x414, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD15__EMI_DRAM_D_15				= IOMUX_PAD(0x418, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD16__EMI_DRAM_D_16				= IOMUX_PAD(0x41c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD17__EMI_DRAM_D_17				= IOMUX_PAD(0x420, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD18__EMI_DRAM_D_18				= IOMUX_PAD(0x424, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD19__EMI_DRAM_D_19				= IOMUX_PAD(0x428, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD20__EMI_DRAM_D_20				= IOMUX_PAD(0x42c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD21__EMI_DRAM_D_21				= IOMUX_PAD(0x430, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD22__EMI_DRAM_D_22				= IOMUX_PAD(0x434, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD23__EMI_DRAM_D_23				= IOMUX_PAD(0x438, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD24__EMI_DRAM_D_24				= IOMUX_PAD(0x43c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD25__EMI_DRAM_D_25				= IOMUX_PAD(0x440, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD26__EMI_DRAM_D_26				= IOMUX_PAD(0x444, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD27__EMI_DRAM_D_27				= IOMUX_PAD(0x448, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD28__EMI_DRAM_D_28				= IOMUX_PAD(0x44c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD29__EMI_DRAM_D_29				= IOMUX_PAD(0x450, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD30__EMI_DRAM_D_30				= IOMUX_PAD(0x454, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD31__EMI_DRAM_D_31				= IOMUX_PAD(0x458, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_DQM0__EMI_DRAM_DQM_0				= IOMUX_PAD(0x45c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_DQM1__EMI_DRAM_DQM_1				= IOMUX_PAD(0x460, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_DQM2__EMI_DRAM_DQM_2				= IOMUX_PAD(0x464, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_DQM3__EMI_DRAM_DQM_3				= IOMUX_PAD(0x468, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_EB0__EMI_EIM_EB0_B				= IOMUX_PAD(0x46c, 0x094, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_EB1__EMI_EIM_EB1_B				= IOMUX_PAD(0x470, 0x098, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_OE__EMI_EIM_OE					= IOMUX_PAD(0x474, 0x09c, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CS0__EMI_EIM_CS0				= IOMUX_PAD(0x478, 0x0a0, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CS1__EMI_EIM_CS1				= IOMUX_PAD(0x47c, 0x0a4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CS1__EMI_NANDF_CE3				= IOMUX_PAD(0x47c, 0x0a4, 3, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CS2__EMI_EIM_CS2				= IOMUX_PAD(0x480, 0x0a8, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CS3__EMI_EIM_CS3				= IOMUX_PAD(0x484, 0x0ac, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CS4__EMI_EIM_CS4				= IOMUX_PAD(0x488, 0x0b0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CS4__EMI_DTACK_B				= IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL),
+	MX35_PAD_CS4__EMI_NANDF_CE1				= IOMUX_PAD(0x488, 0x0b0, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CS4__GPIO1_20					= IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL),
+
+	MX35_PAD_CS5__EMI_EIM_CS5				= IOMUX_PAD(0x48c, 0x0b4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CS5__CSPI2_SS2					= IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL),
+	MX35_PAD_CS5__CSPI1_SS2					= IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL),
+	MX35_PAD_CS5__EMI_NANDF_CE2				= IOMUX_PAD(0x48c, 0x0b4, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CS5__GPIO1_21					= IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL),
+
+	MX35_PAD_NF_CE0__EMI_NANDF_CE0				= IOMUX_PAD(0x490, 0x0b8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NF_CE0__GPIO1_22				= IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL),
+
+	MX35_PAD_ECB__EMI_EIM_ECB				= IOMUX_PAD(0x494, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LBA__EMI_EIM_LBA				= IOMUX_PAD(0x498, 0x0bc, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_BCLK__EMI_EIM_BCLK				= IOMUX_PAD(0x49c, 0x0c0, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_RW__EMI_EIM_RW					= IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_RAS__EMI_DRAM_RAS				= IOMUX_PAD(0x4a4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CAS__EMI_DRAM_CAS				= IOMUX_PAD(0x4a8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDWE__EMI_DRAM_SDWE				= IOMUX_PAD(0x4ac, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			= IOMUX_PAD(0x4b0, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			= IOMUX_PAD(0x4b4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDCLK__EMI_DRAM_SDCLK				= IOMUX_PAD(0x4b8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				= IOMUX_PAD(0x4bc, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				= IOMUX_PAD(0x4c0, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				= IOMUX_PAD(0x4c4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				= IOMUX_PAD(0x4c8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_NFWE_B__EMI_NANDF_WE_B				= IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			= IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL),
+	MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			= IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL),
+	MX35_PAD_NFWE_B__GPIO2_18				= IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL),
+	MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			= IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_NFRE_B__EMI_NANDF_RE_B				= IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			= IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL),
+	MX35_PAD_NFRE_B__IPU_DISPB_BCLK				= IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFRE_B__GPIO2_19				= IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL),
+	MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			= IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_NFALE__EMI_NANDF_ALE				= IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFALE__USB_TOP_USBH2_STP			= IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFALE__IPU_DISPB_CS0				= IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFALE__GPIO2_20				= IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL),
+	MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			= IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_NFCLE__EMI_NANDF_CLE				= IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			= IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL),
+	MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			= IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFCLE__GPIO2_21				= IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL),
+	MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			= IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_NFWP_B__EMI_NANDF_WP_B				= IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			= IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL),
+	MX35_PAD_NFWP_B__IPU_DISPB_WR				= IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFWP_B__GPIO2_22				= IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL),
+	MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			= IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_NFRB__EMI_NANDF_RB				= IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFRB__IPU_DISPB_RD				= IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_NFRB__GPIO2_23					= IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL),
+	MX35_PAD_NFRB__ARM11P_TOP_TRCLK				= IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D15__EMI_EIM_D_15				= IOMUX_PAD(0x4e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D14__EMI_EIM_D_14				= IOMUX_PAD(0x4e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D13__EMI_EIM_D_13				= IOMUX_PAD(0x4ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D12__EMI_EIM_D_12				= IOMUX_PAD(0x4f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D11__EMI_EIM_D_11				= IOMUX_PAD(0x4f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D10__EMI_EIM_D_10				= IOMUX_PAD(0x4f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D9__EMI_EIM_D_9				= IOMUX_PAD(0x4fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D8__EMI_EIM_D_8				= IOMUX_PAD(0x500, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D7__EMI_EIM_D_7				= IOMUX_PAD(0x504, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D6__EMI_EIM_D_6				= IOMUX_PAD(0x508, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D5__EMI_EIM_D_5				= IOMUX_PAD(0x50c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D4__EMI_EIM_D_4				= IOMUX_PAD(0x510, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D3__EMI_EIM_D_3				= IOMUX_PAD(0x514, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D2__EMI_EIM_D_2				= IOMUX_PAD(0x518, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D1__EMI_EIM_D_1				= IOMUX_PAD(0x51c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D0__EMI_EIM_D_0				= IOMUX_PAD(0x520, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_D8__IPU_CSI_D_8				= IOMUX_PAD(0x524, 0x0e0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D8__KPP_COL_0				= IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D8__GPIO1_20				= IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL),
+	MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			= IOMUX_PAD(0x524, 0x0e0, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_D9__IPU_CSI_D_9				= IOMUX_PAD(0x528, 0x0e4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D9__KPP_COL_1				= IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D9__GPIO1_21				= IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL),
+	MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			= IOMUX_PAD(0x528, 0x0e4, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_D10__IPU_CSI_D_10				= IOMUX_PAD(0x52c, 0x0e8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D10__KPP_COL_2				= IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D10__GPIO1_22				= IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL),
+	MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			= IOMUX_PAD(0x52c, 0x0e8, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_D11__IPU_CSI_D_11				= IOMUX_PAD(0x530, 0x0ec, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D11__KPP_COL_3				= IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D11__GPIO1_23				= IOMUX_PAD(0x530, 0x0ec, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_D12__IPU_CSI_D_12				= IOMUX_PAD(0x534, 0x0f0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D12__KPP_ROW_0				= IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D12__GPIO1_24				= IOMUX_PAD(0x534, 0x0f0, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_D13__IPU_CSI_D_13				= IOMUX_PAD(0x538, 0x0f4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D13__KPP_ROW_1				= IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D13__GPIO1_25				= IOMUX_PAD(0x538, 0x0f4, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_D14__IPU_CSI_D_14				= IOMUX_PAD(0x53c, 0x0f8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D14__KPP_ROW_2				= IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D14__GPIO1_26				= IOMUX_PAD(0x53c, 0x0f8, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_D15__IPU_CSI_D_15				= IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D15__KPP_ROW_3				= IOMUX_PAD(0x540, 0x0fc, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_D15__GPIO1_27				= IOMUX_PAD(0x540, 0x0fc, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				= IOMUX_PAD(0x544, 0x100, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_MCLK__GPIO1_28				= IOMUX_PAD(0x544, 0x100, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			= IOMUX_PAD(0x548, 0x104, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_VSYNC__GPIO1_29				= IOMUX_PAD(0x548, 0x104, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			= IOMUX_PAD(0x54c, 0x108, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_HSYNC__GPIO1_30				= IOMUX_PAD(0x54c, 0x108, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			= IOMUX_PAD(0x550, 0x10c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSI_PIXCLK__GPIO1_31				= IOMUX_PAD(0x550, 0x10c, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_I2C1_CLK__I2C1_SCL				= IOMUX_PAD(0x554, 0x110, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_I2C1_CLK__GPIO2_24				= IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL),
+	MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			= IOMUX_PAD(0x554, 0x110, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_I2C1_DAT__I2C1_SDA				= IOMUX_PAD(0x558, 0x114, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_I2C1_DAT__GPIO2_25				= IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL),
+
+	MX35_PAD_I2C2_CLK__I2C2_SCL				= IOMUX_PAD(0x55c, 0x118, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_I2C2_CLK__CAN1_TXCAN				= IOMUX_PAD(0x55c, 0x118, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			= IOMUX_PAD(0x55c, 0x118, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_I2C2_CLK__GPIO2_26				= IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL),
+	MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		= IOMUX_PAD(0x55c, 0x118, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_I2C2_DAT__I2C2_SDA				= IOMUX_PAD(0x560, 0x11c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_I2C2_DAT__CAN1_RXCAN				= IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL),
+	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			= IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL),
+	MX35_PAD_I2C2_DAT__GPIO2_27				= IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL),
+	MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		= IOMUX_PAD(0x560, 0x11c, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD				= IOMUX_PAD(0x564, 0x120, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_STXD4__GPIO2_28				= IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL),
+	MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		= IOMUX_PAD(0x564, 0x120, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				= IOMUX_PAD(0x568, 0x124, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SRXD4__GPIO2_29				= IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL),
+	MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		= IOMUX_PAD(0x568, 0x124, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC				= IOMUX_PAD(0x56c, 0x128, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SCK4__GPIO2_30					= IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL),
+	MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			= IOMUX_PAD(0x56c, 0x128, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			= IOMUX_PAD(0x570, 0x12c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_STXFS4__GPIO2_31				= IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL),
+	MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		= IOMUX_PAD(0x570, 0x12c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_STXD5__AUDMUX_AUD5_TXD				= IOMUX_PAD(0x574, 0x130, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			= IOMUX_PAD(0x574, 0x130, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_STXD5__CSPI2_MOSI				= IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL),
+	MX35_PAD_STXD5__GPIO1_0					= IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL),
+	MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		= IOMUX_PAD(0x574, 0x130, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				= IOMUX_PAD(0x578, 0x134, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				= IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL),
+	MX35_PAD_SRXD5__CSPI2_MISO				= IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL),
+	MX35_PAD_SRXD5__GPIO1_1					= IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL),
+	MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		= IOMUX_PAD(0x578, 0x134, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SCK5__AUDMUX_AUD5_TXC				= IOMUX_PAD(0x57c, 0x138, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			= IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL),
+	MX35_PAD_SCK5__CSPI2_SCLK				= IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL),
+	MX35_PAD_SCK5__GPIO1_2					= IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL),
+	MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			= IOMUX_PAD(0x57c, 0x138, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			= IOMUX_PAD(0x580, 0x13c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_STXFS5__CSPI2_RDY				= IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL),
+	MX35_PAD_STXFS5__GPIO1_3				= IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL),
+	MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		= IOMUX_PAD(0x580, 0x13c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SCKR__ESAI_SCKR				= IOMUX_PAD(0x584, 0x140, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SCKR__GPIO1_4					= IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL),
+	MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			= IOMUX_PAD(0x584, 0x140, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FSR__ESAI_FSR					= IOMUX_PAD(0x588, 0x144, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FSR__GPIO1_5					= IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL),
+	MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			= IOMUX_PAD(0x588, 0x144, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_HCKR__ESAI_HCKR				= IOMUX_PAD(0x58c, 0x148, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				= IOMUX_PAD(0x58c, 0x148, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_HCKR__CSPI2_SS0				= IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL),
+	MX35_PAD_HCKR__IPU_FLASH_STROBE				= IOMUX_PAD(0x58c, 0x148, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_HCKR__GPIO1_6					= IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL),
+	MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			= IOMUX_PAD(0x58c, 0x148, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SCKT__ESAI_SCKT				= IOMUX_PAD(0x590, 0x14c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SCKT__GPIO1_7					= IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL),
+	MX35_PAD_SCKT__IPU_CSI_D_0				= IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL),
+	MX35_PAD_SCKT__KPP_ROW_2				= IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL),
+
+	MX35_PAD_FST__ESAI_FST					= IOMUX_PAD(0x594, 0x150, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FST__GPIO1_8					= IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL),
+	MX35_PAD_FST__IPU_CSI_D_1				= IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL),
+	MX35_PAD_FST__KPP_ROW_3					= IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL),
+
+	MX35_PAD_HCKT__ESAI_HCKT				= IOMUX_PAD(0x598, 0x154, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_HCKT__AUDMUX_AUD5_RXC				= IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL),
+	MX35_PAD_HCKT__GPIO1_9					= IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL),
+	MX35_PAD_HCKT__IPU_CSI_D_2				= IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL),
+	MX35_PAD_HCKT__KPP_COL_3				= IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL),
+
+	MX35_PAD_TX5_RX0__ESAI_TX5_RX0				= IOMUX_PAD(0x59c, 0x158, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			= IOMUX_PAD(0x59c, 0x158, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX5_RX0__CSPI2_SS2				= IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL),
+	MX35_PAD_TX5_RX0__CAN2_TXCAN				= IOMUX_PAD(0x59c, 0x158, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX5_RX0__UART2_DTR				= IOMUX_PAD(0x59c, 0x158, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX5_RX0__GPIO1_10				= IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL),
+	MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		= IOMUX_PAD(0x59c, 0x158, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_TX4_RX1__ESAI_TX4_RX1				= IOMUX_PAD(0x5a0, 0x15c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			= IOMUX_PAD(0x5a0, 0x15c, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX4_RX1__CSPI2_SS3				= IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL),
+	MX35_PAD_TX4_RX1__CAN2_RXCAN				= IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL),
+	MX35_PAD_TX4_RX1__UART2_DSR				= IOMUX_PAD(0x5a0, 0x15c, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX4_RX1__GPIO1_11				= IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL),
+	MX35_PAD_TX4_RX1__IPU_CSI_D_3				= IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL),
+	MX35_PAD_TX4_RX1__KPP_ROW_0				= IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL),
+
+	MX35_PAD_TX3_RX2__ESAI_TX3_RX2				= IOMUX_PAD(0x5a4, 0x160, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX3_RX2__I2C3_SCL				= IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL),
+	MX35_PAD_TX3_RX2__EMI_NANDF_CE1				= IOMUX_PAD(0x5a4, 0x160, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX3_RX2__GPIO1_12				= IOMUX_PAD(0x5a4, 0x160, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX3_RX2__IPU_CSI_D_4				= IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL),
+	MX35_PAD_TX3_RX2__KPP_ROW_1				= IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL),
+
+	MX35_PAD_TX2_RX3__ESAI_TX2_RX3				= IOMUX_PAD(0x5a8, 0x164, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX2_RX3__I2C3_SDA				= IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL),
+	MX35_PAD_TX2_RX3__EMI_NANDF_CE2				= IOMUX_PAD(0x5a8, 0x164, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX2_RX3__GPIO1_13				= IOMUX_PAD(0x5a8, 0x164, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX2_RX3__IPU_CSI_D_5				= IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL),
+	MX35_PAD_TX2_RX3__KPP_COL_0				= IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL),
+
+	MX35_PAD_TX1__ESAI_TX1					= IOMUX_PAD(0x5ac, 0x168, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX1__CCM_PMIC_RDY				= IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL),
+	MX35_PAD_TX1__CSPI1_SS2					= IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL),
+	MX35_PAD_TX1__EMI_NANDF_CE3				= IOMUX_PAD(0x5ac, 0x168, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX1__UART2_RI					= IOMUX_PAD(0x5ac, 0x168, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX1__GPIO1_14					= IOMUX_PAD(0x5ac, 0x168, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX1__IPU_CSI_D_6				= IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL),
+	MX35_PAD_TX1__KPP_COL_1					= IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL),
+
+	MX35_PAD_TX0__ESAI_TX0					= IOMUX_PAD(0x5b0, 0x16c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			= IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL),
+	MX35_PAD_TX0__CSPI1_SS3					= IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL),
+	MX35_PAD_TX0__EMI_DTACK_B				= IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL),
+	MX35_PAD_TX0__UART2_DCD					= IOMUX_PAD(0x5b0, 0x16c, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX0__GPIO1_15					= IOMUX_PAD(0x5b0, 0x16c, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TX0__IPU_CSI_D_7				= IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL),
+	MX35_PAD_TX0__KPP_COL_2					= IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL),
+
+	MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				= IOMUX_PAD(0x5b4, 0x170, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_MOSI__GPIO1_16				= IOMUX_PAD(0x5b4, 0x170, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		= IOMUX_PAD(0x5b4, 0x170, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSPI1_MISO__CSPI1_MISO				= IOMUX_PAD(0x5b8, 0x174, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_MISO__GPIO1_17				= IOMUX_PAD(0x5b8, 0x174, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		= IOMUX_PAD(0x5b8, 0x174, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSPI1_SS0__CSPI1_SS0				= IOMUX_PAD(0x5bc, 0x178, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS0__OWIRE_LINE				= IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS0__CSPI2_SS3				= IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS0__GPIO1_18				= IOMUX_PAD(0x5bc, 0x178, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			= IOMUX_PAD(0x5bc, 0x178, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSPI1_SS1__CSPI1_SS1				= IOMUX_PAD(0x5c0, 0x17c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS1__PWM_PWMO				= IOMUX_PAD(0x5c0, 0x17c, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS1__CCM_CLK32K				= IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS1__GPIO1_19				= IOMUX_PAD(0x5c0, 0x17c, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			= IOMUX_PAD(0x5c0, 0x17c, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			= IOMUX_PAD(0x5c0, 0x17c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				= IOMUX_PAD(0x5c4, 0x180, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SCLK__GPIO3_4				= IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			= IOMUX_PAD(0x5c4, 0x180, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		= IOMUX_PAD(0x5c4, 0x180, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			= IOMUX_PAD(0x5c8, 0x184, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				= IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			= IOMUX_PAD(0x5c8, 0x184, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	= IOMUX_PAD(0x5c8, 0x184, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_RXD1__UART1_RXD_MUX				= IOMUX_PAD(0x5cc, 0x188, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_RXD1__CSPI2_MOSI				= IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL),
+	MX35_PAD_RXD1__KPP_COL_4				= IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL),
+	MX35_PAD_RXD1__GPIO3_6					= IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL),
+	MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			= IOMUX_PAD(0x5cc, 0x188, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_TXD1__UART1_TXD_MUX				= IOMUX_PAD(0x5d0, 0x18c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TXD1__CSPI2_MISO				= IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL),
+	MX35_PAD_TXD1__KPP_COL_5				= IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL),
+	MX35_PAD_TXD1__GPIO3_7					= IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL),
+	MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			= IOMUX_PAD(0x5d0, 0x18c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_RTS1__UART1_RTS				= IOMUX_PAD(0x5d4, 0x190, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_RTS1__CSPI2_SCLK				= IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL),
+	MX35_PAD_RTS1__I2C3_SCL					= IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL),
+	MX35_PAD_RTS1__IPU_CSI_D_0				= IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL),
+	MX35_PAD_RTS1__KPP_COL_6				= IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL),
+	MX35_PAD_RTS1__GPIO3_8					= IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL),
+	MX35_PAD_RTS1__EMI_NANDF_CE1				= IOMUX_PAD(0x5d4, 0x190, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			= IOMUX_PAD(0x5d4, 0x190, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CTS1__UART1_CTS				= IOMUX_PAD(0x5d8, 0x194, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CTS1__CSPI2_RDY				= IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL),
+	MX35_PAD_CTS1__I2C3_SDA					= IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL),
+	MX35_PAD_CTS1__IPU_CSI_D_1				= IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL),
+	MX35_PAD_CTS1__KPP_COL_7				= IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL),
+	MX35_PAD_CTS1__GPIO3_9					= IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL),
+	MX35_PAD_CTS1__EMI_NANDF_CE2				= IOMUX_PAD(0x5d8, 0x194, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			= IOMUX_PAD(0x5d8, 0x194, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_RXD2__UART2_RXD_MUX				= IOMUX_PAD(0x5dc, 0x198, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_RXD2__KPP_ROW_4				= IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL),
+	MX35_PAD_RXD2__GPIO3_10					= IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL),
+
+	MX35_PAD_TXD2__UART2_TXD_MUX				= IOMUX_PAD(0x5e0, 0x19c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			= IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL),
+	MX35_PAD_TXD2__KPP_ROW_5				= IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL),
+	MX35_PAD_TXD2__GPIO3_11					= IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL),
+
+	MX35_PAD_RTS2__UART2_RTS				= IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_RTS2__SPDIF_SPDIF_IN1				= IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL),
+	MX35_PAD_RTS2__CAN2_RXCAN				= IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL),
+	MX35_PAD_RTS2__IPU_CSI_D_2				= IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL),
+	MX35_PAD_RTS2__KPP_ROW_6				= IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL),
+	MX35_PAD_RTS2__GPIO3_12					= IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL),
+	MX35_PAD_RTS2__AUDMUX_AUD5_RXC				= IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_RTS2__UART3_RXD_MUX				= IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL),
+
+	MX35_PAD_CTS2__UART2_CTS				= IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				= IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CTS2__CAN2_TXCAN				= IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CTS2__IPU_CSI_D_3				= IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL),
+	MX35_PAD_CTS2__KPP_ROW_7				= IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL),
+	MX35_PAD_CTS2__GPIO3_13					= IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL),
+	MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				= IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CTS2__UART3_TXD_MUX				= IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_RTCK__ARM11P_TOP_RTCK				= IOMUX_PAD(0x5ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_TCK__SJC_TCK					= IOMUX_PAD(0x5f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_TMS__SJC_TMS					= IOMUX_PAD(0x5f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_TDI__SJC_TDI					= IOMUX_PAD(0x5f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_TDO__SJC_TDO					= IOMUX_PAD(0x5fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_TRSTB__SJC_TRSTB				= IOMUX_PAD(0x600, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_DE_B__SJC_DE_B					= IOMUX_PAD(0x604, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SJC_MOD__SJC_MOD				= IOMUX_PAD(0x608, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			= IOMUX_PAD(0x60c, 0x1a8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			= IOMUX_PAD(0x60c, 0x1a8, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_USBOTG_PWR__GPIO3_14				= IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL),
+
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			= IOMUX_PAD(0x610, 0x1ac, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			= IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL),
+	MX35_PAD_USBOTG_OC__GPIO3_15				= IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL),
+
+	MX35_PAD_LD0__IPU_DISPB_DAT_0				= IOMUX_PAD(0x614, 0x1b0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD0__GPIO2_0					= IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL),
+	MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			= IOMUX_PAD(0x614, 0x1b0, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD1__IPU_DISPB_DAT_1				= IOMUX_PAD(0x618, 0x1b4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD1__GPIO2_1					= IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL),
+	MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			= IOMUX_PAD(0x618, 0x1b4, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD2__IPU_DISPB_DAT_2				= IOMUX_PAD(0x61c, 0x1b8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD2__GPIO2_2					= IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL),
+	MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			= IOMUX_PAD(0x61c, 0x1b8, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD3__IPU_DISPB_DAT_3				= IOMUX_PAD(0x620, 0x1bc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD3__GPIO2_3					= IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL),
+	MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			= IOMUX_PAD(0x620, 0x1bc, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD4__IPU_DISPB_DAT_4				= IOMUX_PAD(0x624, 0x1c0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD4__GPIO2_4					= IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL),
+	MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			= IOMUX_PAD(0x624, 0x1c0, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD5__IPU_DISPB_DAT_5				= IOMUX_PAD(0x628, 0x1c4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD5__GPIO2_5					= IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL),
+	MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			= IOMUX_PAD(0x628, 0x1c4, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD6__IPU_DISPB_DAT_6				= IOMUX_PAD(0x62c, 0x1c8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD6__GPIO2_6					= IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL),
+	MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			= IOMUX_PAD(0x62c, 0x1c8, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD7__IPU_DISPB_DAT_7				= IOMUX_PAD(0x630, 0x1cc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD7__GPIO2_7					= IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL),
+	MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			= IOMUX_PAD(0x630, 0x1cc, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD8__IPU_DISPB_DAT_8				= IOMUX_PAD(0x634, 0x1d0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD8__GPIO2_8					= IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL),
+	MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			= IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD9__IPU_DISPB_DAT_9				= IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD9__GPIO2_9					= IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL),
+	MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			= IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD10__IPU_DISPB_DAT_10				= IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD10__GPIO2_10					= IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL),
+	MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			= IOMUX_PAD(0x63c, 0x1d8, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD11__IPU_DISPB_DAT_11				= IOMUX_PAD(0x640, 0x1dc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD11__GPIO2_11					= IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL),
+	MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			= IOMUX_PAD(0x640, 0x1dc, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD11__ARM11P_TOP_TRACE_4			= IOMUX_PAD(0x640, 0x1dc, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD12__IPU_DISPB_DAT_12				= IOMUX_PAD(0x644, 0x1e0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD12__GPIO2_12					= IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL),
+	MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			= IOMUX_PAD(0x644, 0x1e0, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD12__ARM11P_TOP_TRACE_5			= IOMUX_PAD(0x644, 0x1e0, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD13__IPU_DISPB_DAT_13				= IOMUX_PAD(0x648, 0x1e4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD13__GPIO2_13					= IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL),
+	MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			= IOMUX_PAD(0x648, 0x1e4, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD13__ARM11P_TOP_TRACE_6			= IOMUX_PAD(0x648, 0x1e4, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD14__IPU_DISPB_DAT_14				= IOMUX_PAD(0x64c, 0x1e8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD14__GPIO2_14					= IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL),
+	MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		= IOMUX_PAD(0x64c, 0x1e8, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD14__ARM11P_TOP_TRACE_7			= IOMUX_PAD(0x64c, 0x1e8, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD15__IPU_DISPB_DAT_15				= IOMUX_PAD(0x650, 0x1ec, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD15__GPIO2_15					= IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL),
+	MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		= IOMUX_PAD(0x650, 0x1ec, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD15__ARM11P_TOP_TRACE_8			= IOMUX_PAD(0x650, 0x1ec, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD16__IPU_DISPB_DAT_16				= IOMUX_PAD(0x654, 0x1f0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			= IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL),
+	MX35_PAD_LD16__GPIO2_16					= IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL),
+	MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		= IOMUX_PAD(0x654, 0x1f0, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD16__ARM11P_TOP_TRACE_9			= IOMUX_PAD(0x654, 0x1f0, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD17__IPU_DISPB_DAT_17				= IOMUX_PAD(0x658, 0x1f4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD17__IPU_DISPB_CS2				= IOMUX_PAD(0x658, 0x1f4, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD17__GPIO2_17					= IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL),
+	MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		= IOMUX_PAD(0x658, 0x1f4, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD17__ARM11P_TOP_TRACE_10			= IOMUX_PAD(0x658, 0x1f4, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD18__IPU_DISPB_DAT_18				= IOMUX_PAD(0x65c, 0x1f8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			= IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL),
+	MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			= IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL),
+	MX35_PAD_LD18__ESDHC3_CMD				= IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL),
+	MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			= IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL),
+	MX35_PAD_LD18__GPIO3_24					= IOMUX_PAD(0x65c, 0x1f8, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		= IOMUX_PAD(0x65c, 0x1f8, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD18__ARM11P_TOP_TRACE_11			= IOMUX_PAD(0x65c, 0x1f8, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD19__IPU_DISPB_DAT_19				= IOMUX_PAD(0x660, 0x1fc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD19__IPU_DISPB_BCLK				= IOMUX_PAD(0x660, 0x1fc, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD19__IPU_DISPB_CS1				= IOMUX_PAD(0x660, 0x1fc, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD19__ESDHC3_CLK				= IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL),
+	MX35_PAD_LD19__USB_TOP_USBOTG_DIR			= IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL),
+	MX35_PAD_LD19__GPIO3_25					= IOMUX_PAD(0x660, 0x1fc, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		= IOMUX_PAD(0x660, 0x1fc, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD19__ARM11P_TOP_TRACE_12			= IOMUX_PAD(0x660, 0x1fc, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD20__IPU_DISPB_DAT_20				= IOMUX_PAD(0x664, 0x200, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD20__IPU_DISPB_CS0				= IOMUX_PAD(0x664, 0x200, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD20__IPU_DISPB_SD_CLK				= IOMUX_PAD(0x664, 0x200, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD20__ESDHC3_DAT0				= IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL),
+	MX35_PAD_LD20__GPIO3_26					= IOMUX_PAD(0x664, 0x200, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		= IOMUX_PAD(0x664, 0x200, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD20__ARM11P_TOP_TRACE_13			= IOMUX_PAD(0x664, 0x200, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD21__IPU_DISPB_DAT_21				= IOMUX_PAD(0x668, 0x204, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD21__IPU_DISPB_PAR_RS				= IOMUX_PAD(0x668, 0x204, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD21__IPU_DISPB_SER_RS				= IOMUX_PAD(0x668, 0x204, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD21__ESDHC3_DAT1				= IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL),
+	MX35_PAD_LD21__USB_TOP_USBOTG_STP			= IOMUX_PAD(0x668, 0x204, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD21__GPIO3_27					= IOMUX_PAD(0x668, 0x204, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		= IOMUX_PAD(0x668, 0x204, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD21__ARM11P_TOP_TRACE_14			= IOMUX_PAD(0x668, 0x204, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD22__IPU_DISPB_DAT_22				= IOMUX_PAD(0x66c, 0x208, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD22__IPU_DISPB_WR				= IOMUX_PAD(0x66c, 0x208, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD22__IPU_DISPB_SD_D_I				= IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL),
+	MX35_PAD_LD22__ESDHC3_DAT2				= IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL),
+	MX35_PAD_LD22__USB_TOP_USBOTG_NXT			= IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL),
+	MX35_PAD_LD22__GPIO3_28					= IOMUX_PAD(0x66c, 0x208, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			= IOMUX_PAD(0x66c, 0x208, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD22__ARM11P_TOP_TRCTL				= IOMUX_PAD(0x66c, 0x208, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_LD23__IPU_DISPB_DAT_23				= IOMUX_PAD(0x670, 0x20c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD23__IPU_DISPB_RD				= IOMUX_PAD(0x670, 0x20c, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD23__IPU_DISPB_SD_D_IO			= IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL),
+	MX35_PAD_LD23__ESDHC3_DAT3				= IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL),
+	MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			= IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL),
+	MX35_PAD_LD23__GPIO3_29					= IOMUX_PAD(0x670, 0x20c, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			= IOMUX_PAD(0x670, 0x20c, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_LD23__ARM11P_TOP_TRCLK				= IOMUX_PAD(0x670, 0x20c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			= IOMUX_PAD(0x674, 0x210, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			= IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL),
+	MX35_PAD_D3_HSYNC__GPIO3_30				= IOMUX_PAD(0x674, 0x210, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		= IOMUX_PAD(0x674, 0x210, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			= IOMUX_PAD(0x674, 0x210, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			= IOMUX_PAD(0x678, 0x214, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			= IOMUX_PAD(0x678, 0x214, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_FPSHIFT__GPIO3_31				= IOMUX_PAD(0x678, 0x214, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	= IOMUX_PAD(0x678, 0x214, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		= IOMUX_PAD(0x678, 0x214, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			= IOMUX_PAD(0x67c, 0x218, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			= IOMUX_PAD(0x67c, 0x218, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_DRDY__GPIO1_0				= IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL),
+	MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		= IOMUX_PAD(0x67c, 0x218, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			= IOMUX_PAD(0x67c, 0x218, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR			= IOMUX_PAD(0x680, 0x21c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CONTRAST__GPIO1_1				= IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL),
+	MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	= IOMUX_PAD(0x680, 0x21c, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			= IOMUX_PAD(0x680, 0x21c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			= IOMUX_PAD(0x684, 0x220, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			= IOMUX_PAD(0x684, 0x220, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_VSYNC__GPIO1_2				= IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL),
+	MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			= IOMUX_PAD(0x684, 0x220, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			= IOMUX_PAD(0x684, 0x220, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D3_REV__IPU_DISPB_D3_REV			= IOMUX_PAD(0x688, 0x224, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_REV__IPU_DISPB_SER_RS			= IOMUX_PAD(0x688, 0x224, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_REV__GPIO1_3				= IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL),
+	MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			= IOMUX_PAD(0x688, 0x224, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			= IOMUX_PAD(0x688, 0x224, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			= IOMUX_PAD(0x68c, 0x228, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_CLS__IPU_DISPB_CS2				= IOMUX_PAD(0x68c, 0x228, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_CLS__GPIO1_4				= IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL),
+	MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		= IOMUX_PAD(0x68c, 0x228, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			= IOMUX_PAD(0x68c, 0x228, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			= IOMUX_PAD(0x690, 0x22c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			= IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL),
+	MX35_PAD_D3_SPL__GPIO1_5				= IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL),
+	MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		= IOMUX_PAD(0x690, 0x22c, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			= IOMUX_PAD(0x690, 0x22c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD1_CMD__ESDHC1_CMD				= IOMUX_PAD(0x694, 0x230, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_CMD__MSHC_SCLK				= IOMUX_PAD(0x694, 0x230, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			= IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL),
+	MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			= IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL),
+	MX35_PAD_SD1_CMD__GPIO1_6				= IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL),
+	MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			= IOMUX_PAD(0x694, 0x230, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD1_CLK__ESDHC1_CLK				= IOMUX_PAD(0x698, 0x234, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_CLK__MSHC_BS				= IOMUX_PAD(0x698, 0x234, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			= IOMUX_PAD(0x698, 0x234, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			= IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL),
+	MX35_PAD_SD1_CLK__GPIO1_7				= IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL),
+	MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			= IOMUX_PAD(0x698, 0x234, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0				= IOMUX_PAD(0x69c, 0x238, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA0__MSHC_DATA_0				= IOMUX_PAD(0x69c, 0x238, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			= IOMUX_PAD(0x69c, 0x238, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		= IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA0__GPIO1_8				= IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			= IOMUX_PAD(0x69c, 0x238, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1				= IOMUX_PAD(0x6a0, 0x23c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA1__MSHC_DATA_1				= IOMUX_PAD(0x6a0, 0x23c, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			= IOMUX_PAD(0x6a0, 0x23c, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		= IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA1__GPIO1_9				= IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			= IOMUX_PAD(0x6a0, 0x23c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2				= IOMUX_PAD(0x6a4, 0x240, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA2__MSHC_DATA_2				= IOMUX_PAD(0x6a4, 0x240, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA2__IPU_DISPB_WR			= IOMUX_PAD(0x6a4, 0x240, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		= IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA2__GPIO1_10				= IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			= IOMUX_PAD(0x6a4, 0x240, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3				= IOMUX_PAD(0x6a8, 0x244, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA3__MSHC_DATA_3				= IOMUX_PAD(0x6a8, 0x244, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA3__IPU_DISPB_RD			= IOMUX_PAD(0x6a8, 0x244, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		= IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA3__GPIO1_11				= IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL),
+	MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			= IOMUX_PAD(0x6a8, 0x244, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD2_CMD__ESDHC2_CMD				= IOMUX_PAD(0x6ac, 0x248, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_CMD__I2C3_SCL				= IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL),
+	MX35_PAD_SD2_CMD__ESDHC1_DAT4				= IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_CMD__IPU_CSI_D_2				= IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL),
+	MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			= IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_CMD__GPIO2_0				= IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL),
+	MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			= IOMUX_PAD(0x6ac, 0x248, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			= IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL),
+
+	MX35_PAD_SD2_CLK__ESDHC2_CLK				= IOMUX_PAD(0x6b0, 0x24c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_CLK__I2C3_SDA				= IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL),
+	MX35_PAD_SD2_CLK__ESDHC1_DAT5				= IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_CLK__IPU_CSI_D_3				= IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL),
+	MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			= IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_CLK__GPIO2_1				= IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL),
+	MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			= IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL),
+	MX35_PAD_SD2_CLK__IPU_DISPB_CS2				= IOMUX_PAD(0x6b0, 0x24c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_SD2_DATA0__ESDHC2_DAT0				= IOMUX_PAD(0x6b4, 0x250, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA0__UART3_RXD_MUX			= IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA0__ESDHC1_DAT6				= IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA0__IPU_CSI_D_4				= IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		= IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA0__GPIO2_2				= IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			= IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL),
+
+	MX35_PAD_SD2_DATA1__ESDHC2_DAT1				= IOMUX_PAD(0x6b8, 0x254, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA1__UART3_TXD_MUX			= IOMUX_PAD(0x6b8, 0x254, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA1__ESDHC1_DAT7				= IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA1__IPU_CSI_D_5				= IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		= IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA1__GPIO2_3				= IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL),
+
+	MX35_PAD_SD2_DATA2__ESDHC2_DAT2				= IOMUX_PAD(0x6bc, 0x258, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA2__UART3_RTS				= IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA2__CAN1_RXCAN				= IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA2__IPU_CSI_D_6				= IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		= IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA2__GPIO2_4				= IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL),
+
+	MX35_PAD_SD2_DATA3__ESDHC2_DAT3				= IOMUX_PAD(0x6c0, 0x25c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA3__UART3_CTS				= IOMUX_PAD(0x6c0, 0x25c, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA3__CAN1_TXCAN				= IOMUX_PAD(0x6c0, 0x25c, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA3__IPU_CSI_D_7				= IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		= IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL),
+	MX35_PAD_SD2_DATA3__GPIO2_5				= IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_CS0__ATA_CS0				= IOMUX_PAD(0x6c4, 0x260, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS0__CSPI1_SS3				= IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS0__IPU_DISPB_CS1				= IOMUX_PAD(0x6c4, 0x260, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS0__GPIO2_6				= IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS0__IPU_DIAGB_0				= IOMUX_PAD(0x6c4, 0x260, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		= IOMUX_PAD(0x6c4, 0x260, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_CS1__ATA_CS1				= IOMUX_PAD(0x6c8, 0x264, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS1__IPU_DISPB_CS2				= IOMUX_PAD(0x6c8, 0x264, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS1__CSPI2_SS0				= IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS1__GPIO2_7				= IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS1__IPU_DIAGB_1				= IOMUX_PAD(0x6c8, 0x264, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		= IOMUX_PAD(0x6c8, 0x264, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DIOR__ATA_DIOR				= IOMUX_PAD(0x6cc, 0x268, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOR__ESDHC3_DAT0				= IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			= IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			= IOMUX_PAD(0x6cc, 0x268, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOR__CSPI2_SS1				= IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOR__GPIO2_8				= IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOR__IPU_DIAGB_2				= IOMUX_PAD(0x6cc, 0x268, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		= IOMUX_PAD(0x6cc, 0x268, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DIOW__ATA_DIOW				= IOMUX_PAD(0x6d0, 0x26c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOW__ESDHC3_DAT1				= IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			= IOMUX_PAD(0x6d0, 0x26c, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			= IOMUX_PAD(0x6d0, 0x26c, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOW__CSPI2_MOSI				= IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOW__GPIO2_9				= IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOW__IPU_DIAGB_3				= IOMUX_PAD(0x6d0, 0x26c, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		= IOMUX_PAD(0x6d0, 0x26c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DMACK__ATA_DMACK				= IOMUX_PAD(0x6d4, 0x270, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMACK__ESDHC3_DAT2				= IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			= IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMACK__CSPI2_MISO				= IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMACK__GPIO2_10				= IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMACK__IPU_DIAGB_4				= IOMUX_PAD(0x6d4, 0x270, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		= IOMUX_PAD(0x6d4, 0x270, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_RESET_B__ATA_RESET_B			= IOMUX_PAD(0x6d8, 0x274, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			= IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		= IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			= IOMUX_PAD(0x6d8, 0x274, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_RESET_B__CSPI2_RDY				= IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_RESET_B__GPIO2_11				= IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			= IOMUX_PAD(0x6d8, 0x274, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		= IOMUX_PAD(0x6d8, 0x274, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_IORDY__ATA_IORDY				= IOMUX_PAD(0x6dc, 0x278, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_IORDY__ESDHC3_DAT4				= IOMUX_PAD(0x6dc, 0x278, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		= IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			= IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL),
+	MX35_PAD_ATA_IORDY__ESDHC2_DAT4				= IOMUX_PAD(0x6dc, 0x278, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_IORDY__GPIO2_12				= IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_IORDY__IPU_DIAGB_6				= IOMUX_PAD(0x6dc, 0x278, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		= IOMUX_PAD(0x6dc, 0x278, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA0__ATA_DATA_0				= IOMUX_PAD(0x6e0, 0x27c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA0__ESDHC3_DAT5				= IOMUX_PAD(0x6e0, 0x27c, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		= IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			= IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA0__ESDHC2_DAT5				= IOMUX_PAD(0x6e0, 0x27c, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA0__GPIO2_13				= IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA0__IPU_DIAGB_7				= IOMUX_PAD(0x6e0, 0x27c, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		= IOMUX_PAD(0x6e0, 0x27c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA1__ATA_DATA_1				= IOMUX_PAD(0x6e4, 0x280, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA1__ESDHC3_DAT6				= IOMUX_PAD(0x6e4, 0x280, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		= IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			= IOMUX_PAD(0x6e4, 0x280, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA1__ESDHC2_DAT6				= IOMUX_PAD(0x6e4, 0x280, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA1__GPIO2_14				= IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA1__IPU_DIAGB_8				= IOMUX_PAD(0x6e4, 0x280, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			= IOMUX_PAD(0x6e4, 0x280, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA2__ATA_DATA_2				= IOMUX_PAD(0x6e8, 0x284, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA2__ESDHC3_DAT7				= IOMUX_PAD(0x6e8, 0x284, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		= IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			= IOMUX_PAD(0x6e8, 0x284, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA2__ESDHC2_DAT7				= IOMUX_PAD(0x6e8, 0x284, 4, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA2__GPIO2_15				= IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA2__IPU_DIAGB_9				= IOMUX_PAD(0x6e8, 0x284, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			= IOMUX_PAD(0x6e8, 0x284, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA3__ATA_DATA_3				= IOMUX_PAD(0x6ec, 0x288, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA3__ESDHC3_CLK				= IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		= IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA3__CSPI2_SCLK				= IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA3__GPIO2_16				= IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA3__IPU_DIAGB_10			= IOMUX_PAD(0x6ec, 0x288, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			= IOMUX_PAD(0x6ec, 0x288, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA4__ATA_DATA_4				= IOMUX_PAD(0x6f0, 0x28c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA4__ESDHC3_CMD				= IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		= IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA4__GPIO2_17				= IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA4__IPU_DIAGB_11			= IOMUX_PAD(0x6f0, 0x28c, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			= IOMUX_PAD(0x6f0, 0x28c, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA5__ATA_DATA_5				= IOMUX_PAD(0x6f4, 0x290, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		= IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA5__GPIO2_18				= IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA5__IPU_DIAGB_12			= IOMUX_PAD(0x6f4, 0x290, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			= IOMUX_PAD(0x6f4, 0x290, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA6__ATA_DATA_6				= IOMUX_PAD(0x6f8, 0x294, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA6__CAN1_TXCAN				= IOMUX_PAD(0x6f8, 0x294, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA6__UART1_DTR				= IOMUX_PAD(0x6f8, 0x294, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			= IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA6__GPIO2_19				= IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA6__IPU_DIAGB_13			= IOMUX_PAD(0x6f8, 0x294, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA7__ATA_DATA_7				= IOMUX_PAD(0x6fc, 0x298, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA7__CAN1_RXCAN				= IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA7__UART1_DSR				= IOMUX_PAD(0x6fc, 0x298, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			= IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA7__GPIO2_20				= IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA7__IPU_DIAGB_14			= IOMUX_PAD(0x6fc, 0x298, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA8__ATA_DATA_8				= IOMUX_PAD(0x700, 0x29c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA8__UART3_RTS				= IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA8__UART1_RI				= IOMUX_PAD(0x700, 0x29c, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			= IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA8__GPIO2_21				= IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA8__IPU_DIAGB_15			= IOMUX_PAD(0x700, 0x29c, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA9__ATA_DATA_9				= IOMUX_PAD(0x704, 0x2a0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA9__UART3_CTS				= IOMUX_PAD(0x704, 0x2a0, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA9__UART1_DCD				= IOMUX_PAD(0x704, 0x2a0, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			= IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA9__GPIO2_22				= IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA9__IPU_DIAGB_16			= IOMUX_PAD(0x704, 0x2a0, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA10__ATA_DATA_10			= IOMUX_PAD(0x708, 0x2a4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA10__UART3_RXD_MUX			= IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			= IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA10__GPIO2_23				= IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA10__IPU_DIAGB_17			= IOMUX_PAD(0x708, 0x2a4, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA11__ATA_DATA_11			= IOMUX_PAD(0x70c, 0x2a8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA11__UART3_TXD_MUX			= IOMUX_PAD(0x70c, 0x2a8, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			= IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA11__GPIO2_24				= IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA11__IPU_DIAGB_18			= IOMUX_PAD(0x70c, 0x2a8, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA12__ATA_DATA_12			= IOMUX_PAD(0x710, 0x2ac, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA12__I2C3_SCL				= IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA12__GPIO2_25				= IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA12__IPU_DIAGB_19			= IOMUX_PAD(0x710, 0x2ac, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA13__ATA_DATA_13			= IOMUX_PAD(0x714, 0x2b0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA13__I2C3_SDA				= IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA13__GPIO2_26				= IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA13__IPU_DIAGB_20			= IOMUX_PAD(0x714, 0x2b0, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA14__ATA_DATA_14			= IOMUX_PAD(0x718, 0x2b4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA14__IPU_CSI_D_0			= IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA14__KPP_ROW_0				= IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA14__GPIO2_27				= IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA14__IPU_DIAGB_21			= IOMUX_PAD(0x718, 0x2b4, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DATA15__ATA_DATA_15			= IOMUX_PAD(0x71c, 0x2b8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA15__IPU_CSI_D_1			= IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA15__KPP_ROW_1				= IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA15__GPIO2_28				= IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DATA15__IPU_DIAGB_22			= IOMUX_PAD(0x71c, 0x2b8, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_INTRQ__ATA_INTRQ				= IOMUX_PAD(0x720, 0x2bc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				= IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL),
+	MX35_PAD_ATA_INTRQ__KPP_ROW_2				= IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_INTRQ__GPIO2_29				= IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			= IOMUX_PAD(0x720, 0x2bc, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			= IOMUX_PAD(0x724, 0x2c0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			= IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL),
+	MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				= IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_BUFF_EN__GPIO2_30				= IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			= IOMUX_PAD(0x724, 0x2c0, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DMARQ__ATA_DMARQ				= IOMUX_PAD(0x728, 0x2c4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				= IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMARQ__KPP_COL_0				= IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMARQ__GPIO2_31				= IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			= IOMUX_PAD(0x728, 0x2c4, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			= IOMUX_PAD(0x728, 0x2c4, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DA0__ATA_DA_0				= IOMUX_PAD(0x72c, 0x2c8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA0__IPU_CSI_D_5				= IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA0__KPP_COL_1				= IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA0__GPIO3_0				= IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA0__IPU_DIAGB_26				= IOMUX_PAD(0x72c, 0x2c8, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			= IOMUX_PAD(0x72c, 0x2c8, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DA1__ATA_DA_1				= IOMUX_PAD(0x730, 0x2cc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA1__IPU_CSI_D_6				= IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA1__KPP_COL_2				= IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA1__GPIO3_1				= IOMUX_PAD(0x730, 0x2cc, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA1__IPU_DIAGB_27				= IOMUX_PAD(0x730, 0x2cc, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			= IOMUX_PAD(0x730, 0x2cc, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_ATA_DA2__ATA_DA_2				= IOMUX_PAD(0x734, 0x2d0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA2__IPU_CSI_D_7				= IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA2__KPP_COL_3				= IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA2__GPIO3_2				= IOMUX_PAD(0x734, 0x2d0, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA2__IPU_DIAGB_28				= IOMUX_PAD(0x734, 0x2d0, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			= IOMUX_PAD(0x734, 0x2d0, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_MLB_CLK__MLB_MLBCLK				= IOMUX_PAD(0x738, 0x2d4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_MLB_CLK__GPIO3_3				= IOMUX_PAD(0x738, 0x2d4, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_MLB_DAT__MLB_MLBDAT				= IOMUX_PAD(0x73c, 0x2d8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_MLB_DAT__GPIO3_4				= IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL),
+
+	MX35_PAD_MLB_SIG__MLB_MLBSIG				= IOMUX_PAD(0x740, 0x2dc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_MLB_SIG__GPIO3_5				= IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				= IOMUX_PAD(0x744, 0x2e0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			= IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			= IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			= IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				= IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_CLK__GPIO3_6				= IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		= IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		= IOMUX_PAD(0x744, 0x2e0, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				= IOMUX_PAD(0x748, 0x2e4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			= IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			= IOMUX_PAD(0x748, 0x2e4, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			= IOMUX_PAD(0x748, 0x2e4, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_CLK__CSPI2_MISO				= IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_CLK__GPIO3_7				= IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			= IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		= IOMUX_PAD(0x748, 0x2e4, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV				= IOMUX_PAD(0x74c, 0x2e8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				= IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_DV__UART3_RTS				= IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			= IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_DV__CSPI2_SCLK				= IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_DV__GPIO3_8				= IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			= IOMUX_PAD(0x74c, 0x2e8, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		= IOMUX_PAD(0x74c, 0x2e8, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_COL__FEC_COL				= IOMUX_PAD(0x750, 0x2ec, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_COL__ESDHC1_DAT7				= IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_COL__UART3_CTS				= IOMUX_PAD(0x750, 0x2ec, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			= IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_COL__CSPI2_RDY				= IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_COL__GPIO3_9				= IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			= IOMUX_PAD(0x750, 0x2ec, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			= IOMUX_PAD(0x750, 0x2ec, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0			= IOMUX_PAD(0x754, 0x2f0, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA0__PWM_PWMO				= IOMUX_PAD(0x754, 0x2f0, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA0__UART3_DTR				= IOMUX_PAD(0x754, 0x2f0, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		= IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA0__CSPI2_SS0				= IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA0__GPIO3_10				= IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			= IOMUX_PAD(0x754, 0x2f0, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		= IOMUX_PAD(0x754, 0x2f0, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0			= IOMUX_PAD(0x758, 0x2f4, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			= IOMUX_PAD(0x758, 0x2f4, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA0__UART3_DSR				= IOMUX_PAD(0x758, 0x2f4, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		= IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA0__CSPI2_SS1				= IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA0__GPIO3_11				= IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			= IOMUX_PAD(0x758, 0x2f4, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		= IOMUX_PAD(0x758, 0x2f4, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN				= IOMUX_PAD(0x75c, 0x2f8, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			= IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_EN__UART3_RI				= IOMUX_PAD(0x75c, 0x2f8, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		= IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_EN__GPIO3_12				= IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			= IOMUX_PAD(0x75c, 0x2f8, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		= IOMUX_PAD(0x75c, 0x2f8, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_MDC__FEC_MDC				= IOMUX_PAD(0x760, 0x2fc, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDC__CAN2_TXCAN				= IOMUX_PAD(0x760, 0x2fc, 1, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDC__UART3_DCD				= IOMUX_PAD(0x760, 0x2fc, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			= IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDC__GPIO3_13				= IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDC__IPU_DISPB_WR				= IOMUX_PAD(0x760, 0x2fc, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			= IOMUX_PAD(0x760, 0x2fc, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_MDIO__FEC_MDIO				= IOMUX_PAD(0x764, 0x300, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDIO__CAN2_RXCAN				= IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			= IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDIO__GPIO3_14				= IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDIO__IPU_DISPB_RD				= IOMUX_PAD(0x764, 0x300, 6, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			= IOMUX_PAD(0x764, 0x300, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				= IOMUX_PAD(0x768, 0x304, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_ERR__OWIRE_LINE				= IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			= IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		= IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_ERR__GPIO3_15				= IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			= IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		= IOMUX_PAD(0x768, 0x304, 7, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				= IOMUX_PAD(0x76c, 0x308, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			= IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		= IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_ERR__KPP_COL_4				= IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_ERR__GPIO3_16				= IOMUX_PAD(0x76c, 0x308, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			= IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_CRS__FEC_CRS				= IOMUX_PAD(0x770, 0x30c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_CRS__IPU_CSI_D_1				= IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			= IOMUX_PAD(0x770, 0x30c, 3, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_CRS__KPP_COL_5				= IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_CRS__GPIO3_17				= IOMUX_PAD(0x770, 0x30c, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			= IOMUX_PAD(0x770, 0x30c, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1			= IOMUX_PAD(0x774, 0x310, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			= IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			= IOMUX_PAD(0x774, 0x310, 2, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			= IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA1__KPP_COL_6				= IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA1__GPIO3_18				= IOMUX_PAD(0x774, 0x310, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			= IOMUX_PAD(0x774, 0x310, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1			= IOMUX_PAD(0x778, 0x314, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			= IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			= IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA1__KPP_COL_7				= IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA1__GPIO3_19				= IOMUX_PAD(0x778, 0x314, 5, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			= IOMUX_PAD(0x778, 0x314, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2			= IOMUX_PAD(0x77c, 0x318, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			= IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			= IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA2__KPP_ROW_4				= IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA2__GPIO3_20				= IOMUX_PAD(0x77c, 0x318, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2			= IOMUX_PAD(0x780, 0x31c, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			= IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			= IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA2__KPP_ROW_5				= IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA2__GPIO3_21				= IOMUX_PAD(0x780, 0x31c, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3			= IOMUX_PAD(0x784, 0x320, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			= IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			= IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA3__KPP_ROW_6				= IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_RDATA3__GPIO3_22				= IOMUX_PAD(0x784, 0x320, 6, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3			= IOMUX_PAD(0x788, 0x324, 0, 0x0,   0, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			= IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			= IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA3__KPP_ROW_7				= IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL),
+	MX35_PAD_FEC_TDATA3__GPIO3_23				= IOMUX_PAD(0x788, 0x324, 5, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			= IOMUX_PAD(0x78c, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+
+	MX35_PAD_TEST_MODE__TCU_TEST_MODE			= IOMUX_PAD(0x790, 0x0,   0, 0x0,   0, NO_PAD_CTRL),
+};
+
+#endif /* __IOMUX_MX35_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx35/lowlevel_macro.S b/roms/u-boot/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
new file mode 100644
index 000000000..4b1c9f863
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ */
+
+#include <asm/arch/imx-regs.h>
+#include <generated/asm-offsets.h>
+#include <asm/macro.h>
+
+/*
+ * AIPS setup - Only setup MPROTx registers.
+ * The PACR default values are good.
+ *
+ * Default argument values:
+ *  - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to
+ *    user-mode.
+ *  - OPACR: Clear the on and off peripheral modules Supervisor Protect bit for
+ *    SDMA to access them.
+ */
+.macro init_aips mpr=0x77777777, opacr=0x00000000
+	ldr	r0, =AIPS1_BASE_ADDR
+	ldr	r1, =\mpr
+	str	r1, [r0, #AIPS_MPR_0_7]
+	str	r1, [r0, #AIPS_MPR_8_15]
+	ldr	r2, =AIPS2_BASE_ADDR
+	str	r1, [r2, #AIPS_MPR_0_7]
+	str	r1, [r2, #AIPS_MPR_8_15]
+
+	/* Did not change the AIPS control registers access type. */
+	ldr	r1, =\opacr
+	str	r1, [r0, #AIPS_OPACR_0_7]
+	str	r1, [r0, #AIPS_OPACR_8_15]
+	str	r1, [r0, #AIPS_OPACR_16_23]
+	str	r1, [r0, #AIPS_OPACR_24_31]
+	str	r1, [r0, #AIPS_OPACR_32_39]
+	str	r1, [r2, #AIPS_OPACR_0_7]
+	str	r1, [r2, #AIPS_OPACR_8_15]
+	str	r1, [r2, #AIPS_OPACR_16_23]
+	str	r1, [r2, #AIPS_OPACR_24_31]
+	str	r1, [r2, #AIPS_OPACR_32_39]
+.endm
+
+/*
+ * MAX (Multi-Layer AHB Crossbar Switch) setup
+ *
+ * Default argument values:
+ *  - MPR: priority is M4 > M2 > M3 > M5 > M0 > M1
+ *  - SGPCR: always park on last master
+ *  - MGPCR: restore default values
+ */
+.macro init_max mpr=0x00302154, sgpcr=0x00000010, mgpcr=0x00000000
+	ldr	r0, =MAX_BASE_ADDR
+	ldr	r1, =\mpr
+	str	r1, [r0, #MAX_MPR0]	/* for S0 */
+	str	r1, [r0, #MAX_MPR1]	/* for S1 */
+	str	r1, [r0, #MAX_MPR2]	/* for S2 */
+	str	r1, [r0, #MAX_MPR3]	/* for S3 */
+	str	r1, [r0, #MAX_MPR4]	/* for S4 */
+	ldr	r1, =\sgpcr
+	str	r1, [r0, #MAX_SGPCR0]	/* for S0 */
+	str	r1, [r0, #MAX_SGPCR1]	/* for S1 */
+	str	r1, [r0, #MAX_SGPCR2]	/* for S2 */
+	str	r1, [r0, #MAX_SGPCR3]	/* for S3 */
+	str	r1, [r0, #MAX_SGPCR4]	/* for S4 */
+	ldr	r1, =\mgpcr
+	str	r1, [r0, #MAX_MGPCR0]	/* for M0 */
+	str	r1, [r0, #MAX_MGPCR1]	/* for M1 */
+	str	r1, [r0, #MAX_MGPCR2]	/* for M2 */
+	str	r1, [r0, #MAX_MGPCR3]	/* for M3 */
+	str	r1, [r0, #MAX_MGPCR4]	/* for M4 */
+	str	r1, [r0, #MAX_MGPCR5]	/* for M5 */
+.endm
+
+/*
+ * M3IF setup
+ *
+ * Default argument values:
+ *  - CTL:
+ * MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
+ * MRRP[1] = L2CC1 not on priority list (0 << 1)	= 0x00000000
+ * MRRP[2] = MBX not on priority list (0 << 2)		= 0x00000000
+ * MRRP[3] = MAX1 not on priority list (0 << 3)		= 0x00000000
+ * MRRP[4] = SDMA not on priority list (0 << 4)		= 0x00000000
+ * MRRP[5] = MPEG4 not on priority list (0 << 5)	= 0x00000000
+ * MRRP[6] = IPU1 on priority list (1 << 6)		= 0x00000040
+ * MRRP[7] = IPU2 not on priority list (0 << 7)		= 0x00000000
+ *							------------
+ *							  0x00000040
+ */
+.macro init_m3if ctl=0x00000040
+	/* M3IF Control Register (M3IFCTL) */
+	write32	M3IF_BASE_ADDR, \ctl
+.endm
+
+.macro core_init
+	mrc	p15, 0, r1, c1, c0, 0
+
+	/* Set branch prediction enable */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #7
+	mcr	p15, 0, r0, c1, c0, 1
+	orr	r1, r1, #1 << 11
+
+	/* Set unaligned access enable */
+	orr	r1, r1, #1 << 22
+
+	/* Set low int latency enable */
+	orr	r1, r1, #1 << 21
+
+	mcr	p15, 0, r1, c1, c0, 0
+
+	mov	r0, #0
+
+	mcr	p15, 0, r0, c15, c2, 4
+
+	mcr	p15, 0, r0, c7, c7, 0	/* Invalidate I cache and D cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* Invalidate TLBs */
+	mcr	p15, 0, r0, c7, c10, 4	/* Drain the write buffer */
+
+	/* Setup the Peripheral Port Memory Remap Register */
+	ldr	r0, =0x40000015		/* Start from AIPS 2-GB region */
+	mcr	p15, 0, r0, c15, c2, 4
+.endm
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx35/mmc_host_def.h b/roms/u-boot/arch/arm/include/asm/arch-mx35/mmc_host_def.h
new file mode 100644
index 000000000..81c19bb32
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx35/mmc_host_def.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ */
+
+#ifndef MMC_HOST_DEF_H
+#define MMC_HOST_DEF_H
+
+/* Driver definitions */
+#define MMCSD_SECTOR_SIZE		512
+
+#endif /* MMC_HOST_DEF_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx35/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-mx35/sys_proto.h
new file mode 100644
index 000000000..6e8b84128
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx35/sys_proto.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ */
+
+#ifndef _MX35_SYS_PROTO_H_
+#define _MX35_SYS_PROTO_H_
+
+#include <asm/mach-imx/sys_proto.h>
+
+void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, u32 row,
+			  u32 col, u32 dsize, u32 refresh);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx5/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mx5/clock.h
new file mode 100644
index 000000000..63a51042e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx5/clock.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#ifdef CONFIG_SYS_MX5_HCLK
+#define MXC_HCLK	CONFIG_SYS_MX5_HCLK
+#else
+#define MXC_HCLK	24000000
+#endif
+
+#ifdef CONFIG_SYS_MX5_CLK32
+#define MXC_CLK32	CONFIG_SYS_MX5_CLK32
+#else
+#define MXC_CLK32	32768
+#endif
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_IPG_PERCLK,
+	MXC_UART_CLK,
+	MXC_CSPI_CLK,
+	MXC_ESDHC_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_ESDHC3_CLK,
+	MXC_ESDHC4_CLK,
+	MXC_FEC_CLK,
+	MXC_SATA_CLK,
+	MXC_DDR_CLK,
+	MXC_NFC_CLK,
+	MXC_PERIPH_CLK,
+	MXC_I2C_CLK,
+	MXC_LDB_CLK,
+};
+
+u32 imx_get_uartclk(void);
+u32 imx_get_fecclk(void);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+int mxc_set_clock(u32 ref, u32 freq, u32 clk_type);
+void set_usb_phy_clk(void);
+void enable_usb_phy1_clk(bool enable);
+void enable_usb_phy2_clk(bool enable);
+void set_usboh3_clk(void);
+void enable_usboh3_clk(bool enable);
+void mxc_set_sata_internal_clock(void);
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
+void enable_nfc_clk(unsigned char enable);
+void enable_efuse_prog_supply(bool enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx5/crm_regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx5/crm_regs.h
new file mode 100644
index 000000000..9d54ab7fb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx5/crm_regs.h
@@ -0,0 +1,616 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+
+#define MXC_CCM_BASE	CCM_BASE_ADDR
+
+/* DPLL register mapping structure */
+struct mxc_pll_reg {
+	u32 ctrl;
+	u32 config;
+	u32 op;
+	u32 mfd;
+	u32 mfn;
+	u32 mfn_minus;
+	u32 mfn_plus;
+	u32 hfs_op;
+	u32 hfs_mfd;
+	u32 hfs_mfn;
+	u32 mfn_togc;
+	u32 destat;
+};
+
+/* Register maping of CCM*/
+struct mxc_ccm_reg {
+	u32 ccr;	/* 0x0000 */
+	u32 ccdr;
+	u32 csr;
+	u32 ccsr;
+	u32 cacrr;	/* 0x0010*/
+	u32 cbcdr;
+	u32 cbcmr;
+	u32 cscmr1;
+	u32 cscmr2;	/* 0x0020 */
+	u32 cscdr1;
+	u32 cs1cdr;
+	u32 cs2cdr;
+	u32 cdcdr;	/* 0x0030 */
+	u32 chsccdr;
+	u32 cscdr2;
+	u32 cscdr3;
+	u32 cscdr4;	/* 0x0040 */
+	u32 cwdr;
+	u32 cdhipr;
+	u32 cdcr;
+	u32 ctor;	/* 0x0050 */
+	u32 clpcr;
+	u32 cisr;
+	u32 cimr;
+	u32 ccosr;	/* 0x0060 */
+	u32 cgpr;
+	u32 CCGR0;
+	u32 CCGR1;
+	u32 CCGR2;	/* 0x0070 */
+	u32 CCGR3;
+	u32 CCGR4;
+	u32 CCGR5;
+	u32 CCGR6;	/* 0x0080 */
+#ifdef CONFIG_MX53
+	u32 CCGR7;      /* 0x0084 */
+#endif
+	u32 cmeor;
+};
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_COSC_EN			(0x1 << 12)
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCR_FPM_MULT			(0x1 << 11)
+#endif
+#define MXC_CCM_CCR_CAMP2_EN			(0x1 << 10)
+#define MXC_CCM_CCR_CAMP1_EN			(0x1 << 9)
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCR_FPM_EN			(0x1 << 8)
+#endif
+#define MXC_CCM_CCR_OSCNT_OFFSET		0
+#define MXC_CCM_CCR_OSCNT_MASK			0xFF
+#define MXC_CCM_CCR_OSCNT(v)			((v) & 0xFF)
+#define MXC_CCM_CCR_OSCNT_RD(r)			((r) & 0xFF)
+
+/* Define the bits in register CCSR */
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCSR_LP_APM			(0x1 << 9)
+#elif defined(CONFIG_MX53)
+#define MXC_CCM_CCSR_LP_APM			(0x1 << 10)
+#define MXC_CCM_CCSR_PLL4_SW_CLK_SEL		(0x1 << 9)
+#endif
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET		7
+#define MXC_CCM_CCSR_STEP_SEL_MASK		(0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL(v)		(((v) & 0x3) << 7)
+#define MXC_CCM_CCSR_STEP_SEL_RD(r)		(((r) >> 7) & 0x3)
+#define MXC_CCM_CCSR_PLL2_DIV_PODF_OFFSET	5
+#define MXC_CCM_CCSR_PLL2_DIV_PODF_MASK		(0x3 << 5)
+#define MXC_CCM_CCSR_PLL2_DIV_PODF(v)		(((v) & 0x3) << 5)
+#define MXC_CCM_CCSR_PLL2_DIV_PODF_RD(r)	(((r) >> 5) & 0x3)
+#define MXC_CCM_CCSR_PLL3_DIV_PODF_OFFSET	3
+#define MXC_CCM_CCSR_PLL3_DIV_PODF_MASK		(0x3 << 3)
+#define MXC_CCM_CCSR_PLL3_DIV_PODF(v)		(((v) & 0x3) << 3)
+#define MXC_CCM_CCSR_PLL3_DIV_PODF_RD(r)	(((r) >> 3) & 0x3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL		(0x1 << 2)
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL		0x1
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET		0
+#define MXC_CCM_CACRR_ARM_PODF_MASK		0x7
+#define MXC_CCM_CACRR_ARM_PODF(v)		((v) & 0x7)
+#define MXC_CCM_CACRR_ARM_PODF_RD(r)		((r) & 0x7)
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_DDR_HIFREQ_SEL		(0x1 << 30)
+#define MXC_CCM_CBCDR_DDR_PODF_OFFSET		27
+#define MXC_CCM_CBCDR_DDR_PODF_MASK		(0x7 << 27)
+#define MXC_CCM_CBCDR_DDR_PODF(v)		(((v) & 0x7) << 27)
+#define MXC_CCM_CBCDR_DDR_PODF_RD(r)		(((r) >> 27) & 0x7)
+#define MXC_CCM_CBCDR_EMI_CLK_SEL		(0x1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
+#define MXC_CCM_CBCDR_EMI_PODF_OFFSET		22
+#define MXC_CCM_CBCDR_EMI_PODF_MASK		(0x7 << 22)
+#define MXC_CCM_CBCDR_EMI_PODF(v)		(((v) & 0x7) << 22)
+#define MXC_CCM_CBCDR_EMI_PODF_RD(r)		(((r) >> 22) & 0x7)
+#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET		19
+#define MXC_CCM_CBCDR_AXI_B_PODF_MASK		(0x7 << 19)
+#define MXC_CCM_CBCDR_AXI_B_PODF(v)		(((v) & 0x7) << 19)
+#define MXC_CCM_CBCDR_AXI_B_PODF_RD(r)		(((r) >> 19) & 0x7)
+#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET		16
+#define MXC_CCM_CBCDR_AXI_A_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CBCDR_AXI_A_PODF(v)		(((v) & 0x7) << 16)
+#define MXC_CCM_CBCDR_AXI_A_PODF_RD(r)		(((r) >> 16) & 0x7)
+#define MXC_CCM_CBCDR_NFC_PODF_OFFSET		13
+#define MXC_CCM_CBCDR_NFC_PODF_MASK		(0x7 << 13)
+#define MXC_CCM_CBCDR_NFC_PODF(v)		(((v) & 0x7) << 13)
+#define MXC_CCM_CBCDR_NFC_PODF_RD(r)		(((r) >> 13) & 0x7)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET		10
+#define MXC_CCM_CBCDR_AHB_PODF_MASK		(0x7 << 10)
+#define MXC_CCM_CBCDR_AHB_PODF(v)		(((v) & 0x7) << 10)
+#define MXC_CCM_CBCDR_AHB_PODF_RD(r)		(((r) >> 10) & 0x7)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET		8
+#define MXC_CCM_CBCDR_IPG_PODF_MASK		(0x3 << 8)
+#define MXC_CCM_CBCDR_IPG_PODF(v)		(((v) & 0x3) << 8)
+#define MXC_CCM_CBCDR_IPG_PODF_RD(r)		(((r) >> 8) & 0x3)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET	6
+#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK		(0x3 << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1(v)		(((v) & 0x3) << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_RD(r)	(((r) >> 6) & 0x3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET	3
+#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK		(0x7 << 3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2(v)		(((v) & 0x7) << 3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_RD(r)	(((r) >> 3) & 0x7)
+#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET	0
+#define MXC_CCM_CBCDR_PERCLK_PODF_MASK		0x7
+#define MXC_CCM_CBCDR_PERCLK_PODF(v)		((v) & 0x7)
+#define MXC_CCM_CBCDR_PERCLK_PODF_RD(r)		((r) & 0x7)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET		30
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK		(0x3 << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL(v)		(((v) & 0x3) << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_RD(r)		(((r) >> 30) & 0x3)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET		28
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK		(0x3 << 28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL(v)		(((v) & 0x3) << 28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_RD(r)		(((r) >> 28) & 0x3)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL			(0x1 << 26)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET		24
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL(v)			(((v) & 0x3) << 24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_RD(r)		(((r) >> 24) & 0x3)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET		22
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL(v)		(((v) & 0x3) << 22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_RD(r)		(((r) >> 22) & 0x3)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET	20
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK	(0x3 << 20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL(v)		(((v) & 0x3) << 20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_RD(r)	(((r) >> 20) & 0x3)
+#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL			(0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL			(0x1 << 18)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET	16
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK	(0x3 << 16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL(v)		(((v) & 0x3) << 16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_RD(r)	(((r) >> 16) & 0x3)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		14
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL(v)			(((v) & 0x3) << 14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_RD(r)		(((r) >> 14) & 0x3)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		12
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL(v)			(((v) & 0x3) << 12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_RD(r)		(((r) >> 12) & 0x3)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL			(0x1 << 11)
+#define MXC_CCM_CSCMR1_VPU_RCLK_SEL			(0x1 << 10)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET		8
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK		(0x3 << 8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL(v)		(((v) & 0x3) << 8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_RD(r)		(((r) >> 8) & 0x3)
+#define MXC_CCM_CSCMR1_TVE_CLK_SEL			(0x1 << 7)
+#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL			(0x1 << 6)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET		4
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL(v)			(((v) & 0x3) << 4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_RD(r)		(((r) >> 4) & 0x3)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET		2
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL(v)			(((v) & 0x3) << 2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_RD(r)		(((r) >> 2) & 0x3)
+#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL		0x1
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL_OFFSET		26
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL_MASK		(0x7 << 26)
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL(v)		(((v) & 0x7) << 26)
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL_RD(r)	(((r) >> 26) & 0x7)
+
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL_LDB_DI0_CLK 5
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET		25
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED(v)			(((v) & 0x7) << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_RD(r)		(((r) >> 25) & 0x7)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET		19
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF(v)			(((v) & 0x3F) << 19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_RD(r)		(((r) >> 19) & 0x3F)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET		16
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED(v)			(((v) & 0x7) << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_RD(r)		(((r) >> 16) & 0x7)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET		9
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF(v)			(((v) & 0x3F) << 9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_RD(r)		(((r) >> 9) & 0x3F)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET		6
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED(v)		(((v) & 0x7) << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_RD(r)		(((r) >> 6) & 0x7)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PODF_OFFSET		0
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PODF_MASK		0x3F
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PODF(v)		((v) & 0x3F)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PODF_RD(r)		((r) & 0x3F)
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET		14
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL(v)		(((v) & 0x3) << 14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_RD(r)		(((r) >> 14) & 0x3)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET		12
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL(v)			(((v) & 0x3) << 12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_RD(r)		(((r) >> 12) & 0x3)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET		10
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK			(0x3 << 10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL(v)			(((v) & 0x3) << 10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_RD(r)			(((r) >> 10) & 0x3)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET		8
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK		(0x3 << 8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL(v)		(((v) & 0x3) << 8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_RD(r)		(((r) >> 8) & 0x3)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET		6
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK		(0x3 << 6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL(v)		(((v) & 0x3) << 6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_RD(r)		(((r) >> 6) & 0x3)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET		4
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK			(0x3 << 4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL(v)			(((v) & 0x3) << 4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_RD(r)			(((r) >> 4) & 0x3)
+#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL		(0x1 << 0)
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET	22
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK	(0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED(v)		(((v) & 0x7) << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_RD(r)	(((r) >> 22) & 0x7)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET	19
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK	(0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF(v)		(((v) & 0x7) << 19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_RD(r)	(((r) >> 19) & 0x7)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET	16
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK	(0x7 << 16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED(v)		(((v) & 0x7) << 16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_RD(r)	(((r) >> 16) & 0x7)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET		14
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF(v)			(((v) & 0x3) << 14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_RD(r)		(((r) >> 14) & 0x3)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET	11
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK	(0x7 << 11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF(v)		(((v) & 0x7) << 11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_RD(r)	(((r) >> 11) & 0x7)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET		8
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK		(0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED(v)		(((v) & 0x7) << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_RD(r)		(((r) >> 8) & 0x7)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET		6
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK		(0x3 << 6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF(v)		(((v) & 0x3) << 6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_RD(r)		(((r) >> 6) & 0x3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET		3
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK		(0x7 << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED(v)			(((v) & 0x7) << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_RD(r)		(((r) >> 3) & 0x7)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		0
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		0x7
+#define MXC_CCM_CSCDR1_UART_CLK_PODF(v)			((v) & 0x7)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_RD(r)		((r) & 0x7)
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_IPU_HS_MASK			(0x1 << 17)
+
+/* Define the bits in register CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE		(1 << 4)
+
+/* Define the bits in register CCGRx */
+#define MXC_CCM_CCGR_CG_MASK				0x3
+#define MXC_CCM_CCGR_CG_OFF				0x0
+#define MXC_CCM_CCGR_CG_RUN_ON				0x1
+#define MXC_CCM_CCGR_CG_ON				0x3
+
+#define MXC_CCM_CCGR0_ARM_BUS_OFFSET			0
+#define MXC_CCM_CCGR0_ARM_BUS(v)			(((v) & 0x3) << 0)
+#define MXC_CCM_CCGR0_ARM_AXI_OFFSET			2
+#define MXC_CCM_CCGR0_ARM_AXI(v)			(((v) & 0x3) << 2)
+#define MXC_CCM_CCGR0_ARM_DEBUG_OFFSET			4
+#define MXC_CCM_CCGR0_ARM_DEBUG(v)			(((v) & 0x3) << 4)
+#define MXC_CCM_CCGR0_TZIC_OFFSET			6
+#define MXC_CCM_CCGR0_TZIC(v)				(((v) & 0x3) << 6)
+#define MXC_CCM_CCGR0_DAP_OFFSET			8
+#define MXC_CCM_CCGR0_DAP(v)				(((v) & 0x3) << 8)
+#define MXC_CCM_CCGR0_TPIU_OFFSET			10
+#define MXC_CCM_CCGR0_TPIU(v)				(((v) & 0x3) << 10)
+#define MXC_CCM_CCGR0_CTI2_OFFSET			12
+#define MXC_CCM_CCGR0_CTI2(v)				(((v) & 0x3) << 12)
+#define MXC_CCM_CCGR0_CTI3_OFFSET			14
+#define MXC_CCM_CCGR0_CTI3(v)				(((v) & 0x3) << 14)
+#define MXC_CCM_CCGR0_AHBMUX1_OFFSET			16
+#define MXC_CCM_CCGR0_AHBMUX1(v)			(((v) & 0x3) << 16)
+#define MXC_CCM_CCGR0_AHBMUX2_OFFSET			18
+#define MXC_CCM_CCGR0_AHBMUX2(v)			(((v) & 0x3) << 18)
+#define MXC_CCM_CCGR0_ROMCP_OFFSET			20
+#define MXC_CCM_CCGR0_ROMCP(v)				(((v) & 0x3) << 20)
+#define MXC_CCM_CCGR0_ROM_OFFSET			22
+#define MXC_CCM_CCGR0_ROM(v)				(((v) & 0x3) << 22)
+#define MXC_CCM_CCGR0_AIPS_TZ1_OFFSET			24
+#define MXC_CCM_CCGR0_AIPS_TZ1(v)			(((v) & 0x3) << 24)
+#define MXC_CCM_CCGR0_AIPS_TZ2_OFFSET			26
+#define MXC_CCM_CCGR0_AIPS_TZ2(v)			(((v) & 0x3) << 26)
+#define MXC_CCM_CCGR0_AHB_MAX_OFFSET			28
+#define MXC_CCM_CCGR0_AHB_MAX(v)			(((v) & 0x3) << 28)
+#define MXC_CCM_CCGR0_IIM_OFFSET			30
+#define MXC_CCM_CCGR0_IIM(v)				(((v) & 0x3) << 30)
+
+#define MXC_CCM_CCGR1_TMAX1_OFFSET			0
+#define MXC_CCM_CCGR1_TMAX1(v)				(((v) & 0x3) << 0)
+#define MXC_CCM_CCGR1_TMAX2_OFFSET			2
+#define MXC_CCM_CCGR1_TMAX2(v)				(((v) & 0x3) << 2)
+#define MXC_CCM_CCGR1_TMAX3_OFFSET			4
+#define MXC_CCM_CCGR1_TMAX3(v)				(((v) & 0x3) << 4)
+#define MXC_CCM_CCGR1_UART1_IPG_OFFSET			6
+#define MXC_CCM_CCGR1_UART1_IPG(v)			(((v) & 0x3) << 6)
+#define MXC_CCM_CCGR1_UART1_PER_OFFSET			8
+#define MXC_CCM_CCGR1_UART1_PER(v)			(((v) & 0x3) << 8)
+#define MXC_CCM_CCGR1_UART2_IPG_OFFSET			10
+#define MXC_CCM_CCGR1_UART2_IPG(v)			(((v) & 0x3) << 10)
+#define MXC_CCM_CCGR1_UART2_PER_OFFSET			12
+#define MXC_CCM_CCGR1_UART2_PER(v)			(((v) & 0x3) << 12)
+#define MXC_CCM_CCGR1_UART3_IPG_OFFSET			14
+#define MXC_CCM_CCGR1_UART3_IPG(v)			(((v) & 0x3) << 14)
+#define MXC_CCM_CCGR1_UART3_PER_OFFSET			16
+#define MXC_CCM_CCGR1_UART3_PER(v)			(((v) & 0x3) << 16)
+#define MXC_CCM_CCGR1_I2C1_OFFSET			18
+#define MXC_CCM_CCGR1_I2C1(v)				(((v) & 0x3) << 18)
+#define MXC_CCM_CCGR1_I2C2_OFFSET			20
+#define MXC_CCM_CCGR1_I2C2(v)				(((v) & 0x3) << 20)
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCGR1_HSI2C_IPG_OFFSET			22
+#define MXC_CCM_CCGR1_HSI2C_IPG(v)			(((v) & 0x3) << 22)
+#define MXC_CCM_CCGR1_HSI2C_SERIAL_OFFSET		24
+#define MXC_CCM_CCGR1_HSI2C_SERIAL(v)			(((v) & 0x3) << 24)
+#elif defined(CONFIG_MX53)
+#define MXC_CCM_CCGR1_I2C3_OFFSET			22
+#define MXC_CCM_CCGR1_I2C3(v)				(((v) & 0x3) << 22)
+#endif
+#define MXC_CCM_CCGR1_FIRI_IPG_OFFSET			26
+#define MXC_CCM_CCGR1_FIRI_IPG(v)			(((v) & 0x3) << 26)
+#define MXC_CCM_CCGR1_FIRI_SERIAL_OFFSET		28
+#define MXC_CCM_CCGR1_FIRI_SERIAL(v)			(((v) & 0x3) << 28)
+#define MXC_CCM_CCGR1_SCC_OFFSET			30
+#define MXC_CCM_CCGR1_SCC(v)				(((v) & 0x3) << 30)
+
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCGR2_USB_PHY_OFFSET			0
+#define MXC_CCM_CCGR2_USB_PHY(v)			(((v) & 0x3) << 0)
+#endif
+#define MXC_CCM_CCGR2_EPIT1_IPG_OFFSET			2
+#define MXC_CCM_CCGR2_EPIT1_IPG(v)			(((v) & 0x3) << 2)
+#define MXC_CCM_CCGR2_EPIT1_HF_OFFSET			4
+#define MXC_CCM_CCGR2_EPIT1_HF(v)			(((v) & 0x3) << 4)
+#define MXC_CCM_CCGR2_EPIT2_IPG_OFFSET			6
+#define MXC_CCM_CCGR2_EPIT2_IPG(v)			(((v) & 0x3) << 6)
+#define MXC_CCM_CCGR2_EPIT2_HF_OFFSET			8
+#define MXC_CCM_CCGR2_EPIT2_HF(v)			(((v) & 0x3) << 8)
+#define MXC_CCM_CCGR2_PWM1_IPG_OFFSET			10
+#define MXC_CCM_CCGR2_PWM1_IPG(v)			(((v) & 0x3) << 10)
+#define MXC_CCM_CCGR2_PWM1_HF_OFFSET			12
+#define MXC_CCM_CCGR2_PWM1_HF(v)			(((v) & 0x3) << 12)
+#define MXC_CCM_CCGR2_PWM2_IPG_OFFSET			14
+#define MXC_CCM_CCGR2_PWM2_IPG(v)			(((v) & 0x3) << 14)
+#define MXC_CCM_CCGR2_PWM2_HF_OFFSET			16
+#define MXC_CCM_CCGR2_PWM2_HF(v)			(((v) & 0x3) << 16)
+#define MXC_CCM_CCGR2_GPT_IPG_OFFSET			18
+#define MXC_CCM_CCGR2_GPT_IPG(v)			(((v) & 0x3) << 18)
+#define MXC_CCM_CCGR2_GPT_HF_OFFSET			20
+#define MXC_CCM_CCGR2_GPT_HF(v)				(((v) & 0x3) << 20)
+#define MXC_CCM_CCGR2_OWIRE_OFFSET			22
+#define MXC_CCM_CCGR2_OWIRE(v)				(((v) & 0x3) << 22)
+#define MXC_CCM_CCGR2_FEC_OFFSET			24
+#define MXC_CCM_CCGR2_FEC(v)				(((v) & 0x3) << 24)
+#define MXC_CCM_CCGR2_USBOH3_IPG_AHB_OFFSET		26
+#define MXC_CCM_CCGR2_USBOH3_IPG_AHB(v)			(((v) & 0x3) << 26)
+#define MXC_CCM_CCGR2_USBOH3_60M_OFFSET			28
+#define MXC_CCM_CCGR2_USBOH3_60M(v)			(((v) & 0x3) << 28)
+#define MXC_CCM_CCGR2_TVE_OFFSET			30
+#define MXC_CCM_CCGR2_TVE(v)				(((v) & 0x3) << 30)
+
+#define MXC_CCM_CCGR3_ESDHC1_IPG_OFFSET			0
+#define MXC_CCM_CCGR3_ESDHC1_IPG(v)			(((v) & 0x3) << 0)
+#define MXC_CCM_CCGR3_ESDHC1_PER_OFFSET			2
+#define MXC_CCM_CCGR3_ESDHC1_PER(v)			(((v) & 0x3) << 2)
+#define MXC_CCM_CCGR3_ESDHC2_IPG_OFFSET			4
+#define MXC_CCM_CCGR3_ESDHC2_IPG(v)			(((v) & 0x3) << 4)
+#define MXC_CCM_CCGR3_ESDHC2_PER_OFFSET			6
+#define MXC_CCM_CCGR3_ESDHC2_PER(v)			(((v) & 0x3) << 6)
+#define MXC_CCM_CCGR3_ESDHC3_IPG_OFFSET			8
+#define MXC_CCM_CCGR3_ESDHC3_IPG(v)			(((v) & 0x3) << 8)
+#define MXC_CCM_CCGR3_ESDHC3_PER_OFFSET			10
+#define MXC_CCM_CCGR3_ESDHC3_PER(v)			(((v) & 0x3) << 10)
+#define MXC_CCM_CCGR3_ESDHC4_IPG_OFFSET			12
+#define MXC_CCM_CCGR3_ESDHC4_IPG(v)			(((v) & 0x3) << 12)
+#define MXC_CCM_CCGR3_ESDHC4_PER_OFFSET			14
+#define MXC_CCM_CCGR3_ESDHC4_PER(v)			(((v) & 0x3) << 14)
+#define MXC_CCM_CCGR3_SSI1_IPG_OFFSET			16
+#define MXC_CCM_CCGR3_SSI1_IPG(v)			(((v) & 0x3) << 16)
+#define MXC_CCM_CCGR3_SSI1_SSI_OFFSET			18
+#define MXC_CCM_CCGR3_SSI1_SSI(v)			(((v) & 0x3) << 18)
+#define MXC_CCM_CCGR3_SSI2_IPG_OFFSET			20
+#define MXC_CCM_CCGR3_SSI2_IPG(v)			(((v) & 0x3) << 20)
+#define MXC_CCM_CCGR3_SSI2_SSI_OFFSET			22
+#define MXC_CCM_CCGR3_SSI2_SSI(v)			(((v) & 0x3) << 22)
+#define MXC_CCM_CCGR3_SSI3_IPG_OFFSET			24
+#define MXC_CCM_CCGR3_SSI3_IPG(v)			(((v) & 0x3) << 24)
+#define MXC_CCM_CCGR3_SSI3_SSI_OFFSET			26
+#define MXC_CCM_CCGR3_SSI3_SSI(v)			(((v) & 0x3) << 26)
+#define MXC_CCM_CCGR3_SSI_EXT1_OFFSET			28
+#define MXC_CCM_CCGR3_SSI_EXT1(v)			(((v) & 0x3) << 28)
+#define MXC_CCM_CCGR3_SSI_EXT2_OFFSET			30
+#define MXC_CCM_CCGR3_SSI_EXT2(v)			(((v) & 0x3) << 30)
+
+#define MXC_CCM_CCGR4_PATA_OFFSET			0
+#define MXC_CCM_CCGR4_PATA(v)				(((v) & 0x3) << 0)
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCGR4_SIM_IPG_OFFSET			2
+#define MXC_CCM_CCGR4_SIM_IPG(v)			(((v) & 0x3) << 2)
+#define MXC_CCM_CCGR4_SIM_SERIAL_OFFSET			4
+#define MXC_CCM_CCGR4_SIM_SERIAL(v)			(((v) & 0x3) << 4)
+#elif defined(CONFIG_MX53)
+#define MXC_CCM_CCGR4_SATA_OFFSET			2
+#define MXC_CCM_CCGR4_SATA(v)				(((v) & 0x3) << 2)
+#define MXC_CCM_CCGR4_CAN2_IPG_OFFSET			6
+#define MXC_CCM_CCGR4_CAN2_IPG(v)			(((v) & 0x3) << 6)
+#define MXC_CCM_CCGR4_CAN2_SERIAL_OFFSET		8
+#define MXC_CCM_CCGR4_CAN2_SERIAL(v)			(((v) & 0x3) << 8)
+#define MXC_CCM_CCGR4_USB_PHY1_OFFSET			10
+#define MXC_CCM_CCGR4_USB_PHY1(v)			(((v) & 0x3) << 10)
+#define MXC_CCM_CCGR4_USB_PHY2_OFFSET			12
+#define MXC_CCM_CCGR4_USB_PHY2(v)			(((v) & 0x3) << 12)
+#endif
+#define MXC_CCM_CCGR4_SAHARA_OFFSET			14
+#define MXC_CCM_CCGR4_SAHARA(v)				(((v) & 0x3) << 14)
+#define MXC_CCM_CCGR4_RTIC_OFFSET			16
+#define MXC_CCM_CCGR4_RTIC(v)				(((v) & 0x3) << 16)
+#define MXC_CCM_CCGR4_ECSPI1_IPG_OFFSET			18
+#define MXC_CCM_CCGR4_ECSPI1_IPG(v)			(((v) & 0x3) << 18)
+#define MXC_CCM_CCGR4_ECSPI1_PER_OFFSET			20
+#define MXC_CCM_CCGR4_ECSPI1_PER(v)			(((v) & 0x3) << 20)
+#define MXC_CCM_CCGR4_ECSPI2_IPG_OFFSET			22
+#define MXC_CCM_CCGR4_ECSPI2_IPG(v)			(((v) & 0x3) << 22)
+#define MXC_CCM_CCGR4_ECSPI2_PER_OFFSET			24
+#define MXC_CCM_CCGR4_ECSPI2_PER(v)			(((v) & 0x3) << 24)
+#define MXC_CCM_CCGR4_CSPI_IPG_OFFSET			26
+#define MXC_CCM_CCGR4_CSPI_IPG(v)			(((v) & 0x3) << 26)
+#define MXC_CCM_CCGR4_SRTC_OFFSET			28
+#define MXC_CCM_CCGR4_SRTC(v)				(((v) & 0x3) << 28)
+#define MXC_CCM_CCGR4_SDMA_OFFSET			30
+#define MXC_CCM_CCGR4_SDMA(v)				(((v) & 0x3) << 30)
+
+#define MXC_CCM_CCGR5_SPBA_OFFSET			0
+#define MXC_CCM_CCGR5_SPBA(v)				(((v) & 0x3) << 0)
+#define MXC_CCM_CCGR5_GPU_OFFSET			2
+#define MXC_CCM_CCGR5_GPU(v)				(((v) & 0x3) << 2)
+#define MXC_CCM_CCGR5_GARB_OFFSET			4
+#define MXC_CCM_CCGR5_GARB(v)				(((v) & 0x3) << 4)
+#define MXC_CCM_CCGR5_VPU_OFFSET			6
+#define MXC_CCM_CCGR5_VPU(v)				(((v) & 0x3) << 6)
+#define MXC_CCM_CCGR5_VPU_REF_OFFSET			8
+#define MXC_CCM_CCGR5_VPU_REF(v)			(((v) & 0x3) << 8)
+#define MXC_CCM_CCGR5_IPU_OFFSET			10
+#define MXC_CCM_CCGR5_IPU(v)				(((v) & 0x3) << 10)
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCGR5_IPUMUX12_OFFSET			12
+#define MXC_CCM_CCGR5_IPUMUX12(v)			(((v) & 0x3) << 12)
+#elif defined(CONFIG_MX53)
+#define MXC_CCM_CCGR5_IPUMUX1_OFFSET			12
+#define MXC_CCM_CCGR5_IPUMUX1(v)			(((v) & 0x3) << 12)
+#endif
+#define MXC_CCM_CCGR5_EMI_FAST_OFFSET			14
+#define MXC_CCM_CCGR5_EMI_FAST(v)			(((v) & 0x3) << 14)
+#define MXC_CCM_CCGR5_EMI_SLOW_OFFSET			16
+#define MXC_CCM_CCGR5_EMI_SLOW(v)			(((v) & 0x3) << 16)
+#define MXC_CCM_CCGR5_EMI_INT1_OFFSET			18
+#define MXC_CCM_CCGR5_EMI_INT1(v)			(((v) & 0x3) << 18)
+#define MXC_CCM_CCGR5_EMI_ENFC_OFFSET			20
+#define MXC_CCM_CCGR5_EMI_ENFC(v)			(((v) & 0x3) << 20)
+#define MXC_CCM_CCGR5_EMI_WRCK_OFFSET			22
+#define MXC_CCM_CCGR5_EMI_WRCK(v)			(((v) & 0x3) << 22)
+#define MXC_CCM_CCGR5_GPC_IPG_OFFSET			24
+#define MXC_CCM_CCGR5_GPC_IPG(v)			(((v) & 0x3) << 24)
+#define MXC_CCM_CCGR5_SPDIF0_OFFSET			26
+#define MXC_CCM_CCGR5_SPDIF0(v)				(((v) & 0x3) << 26)
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCGR5_SPDIF1_OFFSET			28
+#define MXC_CCM_CCGR5_SPDIF1(v)				(((v) & 0x3) << 28)
+#endif
+#define MXC_CCM_CCGR5_SPDIF_IPG_OFFSET			30
+#define MXC_CCM_CCGR5_SPDIF_IPG(v)			(((v) & 0x3) << 30)
+
+#if defined(CONFIG_MX53)
+#define MXC_CCM_CCGR6_IPUMUX2_OFFSET			0
+#define MXC_CCM_CCGR6_IPUMUX2(v)			(((v) & 0x3) << 0)
+#define MXC_CCM_CCGR6_OCRAM_OFFSET			2
+#define MXC_CCM_CCGR6_OCRAM(v)				(((v) & 0x3) << 2)
+#endif
+#define MXC_CCM_CCGR6_CSI_MCLK1_OFFSET			4
+#define MXC_CCM_CCGR6_CSI_MCLK1(v)			(((v) & 0x3) << 4)
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCGR6_CSI_MCLK2_OFFSET			6
+#define MXC_CCM_CCGR6_CSI_MCLK2(v)			(((v) & 0x3) << 6)
+#define MXC_CCM_CCGR6_EMI_GARB_OFFSET			8
+#define MXC_CCM_CCGR6_EMI_GARB(v)			(((v) & 0x3) << 8)
+#elif defined(CONFIG_MX53)
+#define MXC_CCM_CCGR6_EMI_INT2_OFFSET			8
+#define MXC_CCM_CCGR6_EMI_INT2(v)			(((v) & 0x3) << 8)
+#endif
+#define MXC_CCM_CCGR6_IPU_DI0_OFFSET			10
+#define MXC_CCM_CCGR6_IPU_DI0(v)			(((v) & 0x3) << 10)
+#define MXC_CCM_CCGR6_IPU_DI1_OFFSET			12
+#define MXC_CCM_CCGR6_IPU_DI1(v)			(((v) & 0x3) << 12)
+#define MXC_CCM_CCGR6_GPU2D_OFFSET			14
+#define MXC_CCM_CCGR6_GPU2D(v)				(((v) & 0x3) << 14)
+#if defined(CONFIG_MX53)
+#define MXC_CCM_CCGR6_ESAI_IPG_OFFSET			16
+#define MXC_CCM_CCGR6_ESAI_IPG(v)			(((v) & 0x3) << 16)
+#define MXC_CCM_CCGR6_ESAI_ROOT_OFFSET			18
+#define MXC_CCM_CCGR6_ESAI_ROOT(v)			(((v) & 0x3) << 18)
+#define MXC_CCM_CCGR6_CAN1_IPG_OFFSET			20
+#define MXC_CCM_CCGR6_CAN1_IPG(v)			(((v) & 0x3) << 20)
+#define MXC_CCM_CCGR6_CAN1_SERIAL_OFFSET		22
+#define MXC_CCM_CCGR6_CAN1_SERIAL(v)			(((v) & 0x3) << 22)
+#define MXC_CCM_CCGR6_PL301_4X1_OFFSET			24
+#define MXC_CCM_CCGR6_PL301_4X1(v)			(((v) & 0x3) << 24)
+#define MXC_CCM_CCGR6_PL301_2X2_OFFSET			26
+#define MXC_CCM_CCGR6_PL301_2X2(v)			(((v) & 0x3) << 26)
+#define MXC_CCM_CCGR6_LDB_DI0_OFFSET			28
+#define MXC_CCM_CCGR6_LDB_DI0(v)			(((v) & 0x3) << 28)
+#define MXC_CCM_CCGR6_LDB_DI1_OFFSET			30
+#define MXC_CCM_CCGR6_LDB_DI1(v)			(((v) & 0x3) << 30)
+
+#define MXC_CCM_CCGR7_ASRC_IPG_OFFSET			0
+#define MXC_CCM_CCGR7_ASRC_IPG(v)			(((v) & 0x3) << 0)
+#define MXC_CCM_CCGR7_ASRC_ASRCK_OFFSET			2
+#define MXC_CCM_CCGR7_ASRC_ASRCK(v)			(((v) & 0x3) << 2)
+#define MXC_CCM_CCGR7_MLB_OFFSET			4
+#define MXC_CCM_CCGR7_MLB(v)				(((v) & 0x3) << 4)
+#define MXC_CCM_CCGR7_IEEE1588_OFFSET			6
+#define MXC_CCM_CCGR7_IEEE1588(v)			(((v) & 0x3) << 6)
+#define MXC_CCM_CCGR7_UART4_IPG_OFFSET			8
+#define MXC_CCM_CCGR7_UART4_IPG(v)			(((v) & 0x3) << 8)
+#define MXC_CCM_CCGR7_UART4_PER_OFFSET			10
+#define MXC_CCM_CCGR7_UART4_PER(v)			(((v) & 0x3) << 10)
+#define MXC_CCM_CCGR7_UART5_IPG_OFFSET			12
+#define MXC_CCM_CCGR7_UART5_IPG(v)			(((v) & 0x3) << 12)
+#define MXC_CCM_CCGR7_UART5_PER_OFFSET			14
+#define MXC_CCM_CCGR7_UART5_PER(v)			(((v) & 0x3) << 14)
+#endif
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS                 (0x1 << 18)
+
+#define	MXC_DPLLC_CTL_HFSM				(1 << 7)
+#define	MXC_DPLLC_CTL_DPDCK0_2_EN			(1 << 12)
+
+#define	MXC_DPLLC_OP_PDF_MASK				0xf
+#define	MXC_DPLLC_OP_MFI_OFFSET				4
+#define	MXC_DPLLC_OP_MFI_MASK				(0xf << 4)
+#define	MXC_DPLLC_OP_MFI(v)				(((v) & 0xf) << 4)
+#define	MXC_DPLLC_OP_MFI_RD(r)				(((r) >> 4) & 0xf)
+
+#define	MXC_DPLLC_MFD_MFD_MASK				0x7ffffff
+
+#define	MXC_DPLLC_MFN_MFN_MASK				0x7ffffff
+
+#endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx5/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mx5/gpio.h
new file mode 100644
index 000000000..dad40bd3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx5/gpio.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ */
+
+
+#ifndef __ASM_ARCH_MX5_GPIO_H
+#define __ASM_ARCH_MX5_GPIO_H
+
+#include <asm/mach-imx/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx5/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx5/imx-regs.h
new file mode 100644
index 000000000..2731b7fb5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -0,0 +1,526 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_MX5_IMX_REGS_H__
+#define __ASM_ARCH_MX5_IMX_REGS_H__
+
+#define ARCH_MXC
+
+#if defined(CONFIG_MX51)
+#define IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
+#define IPU_SOC_BASE_ADDR	0x40000000
+#define IPU_SOC_OFFSET		0x1E000000
+#define SPBA0_BASE_ADDR         0x70000000
+#define AIPS1_BASE_ADDR         0x73F00000
+#define AIPS2_BASE_ADDR         0x83F00000
+#define CSD0_BASE_ADDR          0x90000000
+#define CSD1_BASE_ADDR          0xA0000000
+#define NFC_BASE_ADDR_AXI       0xCFFF0000
+#define CS1_BASE_ADDR           0xB8000000
+#elif defined(CONFIG_MX53)
+#define IPU_SOC_BASE_ADDR	0x18000000
+#define IPU_SOC_OFFSET		0x06000000
+#define SPBA0_BASE_ADDR         0x50000000
+#define AIPS1_BASE_ADDR         0x53F00000
+#define AIPS2_BASE_ADDR         0x63F00000
+#define CSD0_BASE_ADDR          0x70000000
+#define CSD1_BASE_ADDR          0xB0000000
+#define NFC_BASE_ADDR_AXI       0xF7FF0000
+#define IRAM_BASE_ADDR          0xF8000000
+#define CS1_BASE_ADDR           0xF4000000
+#define SATA_BASE_ADDR		0x10000000
+#else
+#error "CPU_TYPE not defined"
+#endif
+
+#define IRAM_SIZE		0x00020000	/* 128 KB */
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
+#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
+#define UART3_BASE		(SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI1_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
+#define MMC_SDHC3_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
+#define MMC_SDHC4_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00024000)
+#define SPDIF_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00028000)
+#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00030000)
+#define SLIM_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00034000)
+#define HSI2C_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00038000)
+#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 1
+ */
+#define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
+#define GPIO1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
+#define GPIO2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
+#define GPIO3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
+#define GPIO4_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00090000)
+#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00094000)
+#define WDOG1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
+#define WDOG2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0009C000)
+#define GPT1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
+#define SRTC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A4000)
+#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000A8000)
+#define EPIT1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000AC000)
+#define EPIT2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000B0000)
+#define PWM1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000B4000)
+#define PWM2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000B8000)
+#define UART1_BASE		(AIPS1_BASE_ADDR + 0x000BC000)
+#define UART2_BASE		(AIPS1_BASE_ADDR + 0x000C0000)
+#define SRC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D0000)
+#define CCM_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D4000)
+#define GPC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D8000)
+
+#if defined(CONFIG_MX53)
+#define GPIO5_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000DC000)
+#define GPIO6_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000E0000)
+#define GPIO7_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000E4000)
+#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000EC000)
+#define UART4_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000F0000)
+#endif
+/*
+ * AIPS 2
+ */
+#define PLL1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
+#define PLL2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
+#define PLL3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00088000)
+#ifdef	CONFIG_MX53
+#define PLL4_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008c000)
+#endif
+#define AHBMAX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x00094000)
+#define IIM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
+#define CSU_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0009C000)
+#define ARM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A0000)
+#define OWIRE_BASE_ADDR 	(AIPS2_BASE_ADDR + 0x000A4000)
+#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A8000)
+#define CSPI2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
+#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
+#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B4000)
+#define ROMCP_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B8000)
+#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000BC000)
+#define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000C0000)
+#define I2C2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000C4000)
+#define I2C1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000C8000)
+#define SSI1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
+#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000D0000)
+#define M4IF_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
+#define ESDCTL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000D9000)
+#define WEIM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DA000)
+#define NFC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DB000)
+#define EMI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DBF00)
+#define MIPI_HSC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000DC000)
+#define ATA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
+#define SIM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E4000)
+#define SSI3BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E8000)
+#define FEC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+#define TVE_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000F0000)
+#define VPU_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000F4000)
+#define SAHARA_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000F8000)
+
+#if defined(CONFIG_MX53)
+#define UART5_BASE_ADDR         (AIPS2_BASE_ADDR + 0x00090000)
+#endif
+
+/*
+ * WEIM CSnGCR1
+ */
+#define CSEN		1
+#define SWR		(1 << 1)
+#define SRD		(1 << 2)
+#define MUM		(1 << 3)
+#define WFL		(1 << 4)
+#define RFL		(1 << 5)
+#define CRE		(1 << 6)
+#define CREP		(1 << 7)
+#define BL(x)		(((x) & 0x7) << 8)
+#define WC		(1 << 11)
+#define BCD(x)		(((x) & 0x3) << 12)
+#define BCS(x)		(((x) & 0x3) << 14)
+#define DSZ(x)		(((x) & 0x7) << 16)
+#define SP		(1 << 19)
+#define CSREC(x)	(((x) & 0x7) << 20)
+#define AUS		(1 << 23)
+#define GBC(x)		(((x) & 0x7) << 24)
+#define WP		(1 << 27)
+#define PSZ(x)		(((x) & 0x0f << 28)
+
+/*
+ * WEIM CSnGCR2
+ */
+#define ADH(x)		(((x) & 0x3))
+#define DAPS(x)		(((x) & 0x0f << 4)
+#define DAE		(1 << 8)
+#define DAP		(1 << 9)
+#define MUX16_BYP	(1 << 12)
+
+/*
+ * WEIM CSnRCR1
+ */
+#define RCSN(x)		(((x) & 0x7))
+#define RCSA(x)		(((x) & 0x7) << 4)
+#define OEN(x)		(((x) & 0x7) << 8)
+#define OEA(x)		(((x) & 0x7) << 12)
+#define RADVN(x)	(((x) & 0x7) << 16)
+#define RAL		(1 << 19)
+#define RADVA(x)	(((x) & 0x7) << 20)
+#define RWSC(x)		(((x) & 0x3f) << 24)
+
+/*
+ * WEIM CSnRCR2
+ */
+#define RBEN(x)		(((x) & 0x7))
+#define RBE		(1 << 3)
+#define RBEA(x)		(((x) & 0x7) << 4)
+#define RL(x)		(((x) & 0x3) << 8)
+#define PAT(x)		(((x) & 0x7) << 12)
+#define APR		(1 << 15)
+
+/*
+ * WEIM CSnWCR1
+ */
+#define WCSN(x)		(((x) & 0x7))
+#define WCSA(x)		(((x) & 0x7) << 3)
+#define WEN(x)		(((x) & 0x7) << 6)
+#define WEA(x)		(((x) & 0x7) << 9)
+#define WBEN(x)		(((x) & 0x7) << 12)
+#define WBEA(x)		(((x) & 0x7) << 15)
+#define WADVN(x)	(((x) & 0x7) << 18)
+#define WADVA(x)	(((x) & 0x7) << 21)
+#define WWSC(x)		(((x) & 0x3f) << 24)
+#define WBED1		(1 << 30)
+#define WAL		(1 << 31)
+
+/*
+ * WEIM CSnWCR2
+ */
+#define WBED		1
+
+/*
+ * CSPI register definitions
+ */
+#define MXC_SPI_BASE_ADDRESSES \
+	CSPI1_BASE_ADDR, \
+	CSPI2_BASE_ADDR, \
+	CSPI3_BASE_ADDR,
+
+/*
+ * Number of GPIO pins per port
+ */
+#define GPIO_NUM_PIN            32
+
+#define IIM_SREV	0x24
+#define ROM_SI_REV	0x48
+
+#define NFC_BUF_SIZE	0x1000
+
+/* M4IF */
+#define M4IF_FBPM0	0x40
+#define M4IF_FIDBP	0x48
+#define M4IF_GENP_WEIM_MM_MASK		0x00000001
+#define WEIM_GCR2_MUX16_BYP_GRANT_MASK	0x00001000
+
+/* Assuming 24MHz input clock with doubler ON */
+/*                            MFI         PDF */
+#define DP_OP_864	((8 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_864	(180 - 1) /* PL Dither mode */
+#define DP_MFN_864	180
+#define DP_MFN_800_DIT	60 /* PL Dither mode */
+
+#define DP_OP_850	((8 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_850	(48 - 1)
+#define DP_MFN_850	41
+
+#define DP_OP_800	((8 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_800	(3 - 1)
+#define DP_MFN_800	1
+
+#define DP_OP_700	((7 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_700	(24 - 1)
+#define DP_MFN_700	7
+
+#define DP_OP_665	((6 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_665	(96 - 1)
+#define DP_MFN_665	89
+
+#define DP_OP_532	((5 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_532	(24 - 1)
+#define DP_MFN_532	13
+
+#define DP_OP_400	((8 << 4) + ((2 - 1)  << 0))
+#define DP_MFD_400	(3 - 1)
+#define DP_MFN_400	1
+
+#define DP_OP_455	((9 << 4) + ((2 - 1)  << 0))
+#define DP_MFD_455	(48 - 1)
+#define DP_MFN_455	23
+
+#define DP_OP_216	((6 << 4) + ((3 - 1)  << 0))
+#define DP_MFD_216	(4 - 1)
+#define DP_MFN_216	3
+
+#define IMX_IIM_BASE            (IIM_BASE_ADDR)
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+#define __REG(x)	(*((volatile u32 *)(x)))
+#define __REG16(x)	(*((volatile u16 *)(x)))
+#define __REG8(x)	(*((volatile u8 *)(x)))
+
+struct clkctl {
+	u32	ccr;
+	u32	ccdr;
+	u32	csr;
+	u32	ccsr;
+	u32	cacrr;
+	u32	cbcdr;
+	u32	cbcmr;
+	u32	cscmr1;
+	u32	cscmr2;
+	u32	cscdr1;
+	u32	cs1cdr;
+	u32	cs2cdr;
+	u32	cdcdr;
+	u32	chsccdr;
+	u32	cscdr2;
+	u32	cscdr3;
+	u32	cscdr4;
+	u32	cwdr;
+	u32	cdhipr;
+	u32	cdcr;
+	u32	ctor;
+	u32	clpcr;
+	u32	cisr;
+	u32	cimr;
+	u32	ccosr;
+	u32	cgpr;
+	u32	ccgr0;
+	u32	ccgr1;
+	u32	ccgr2;
+	u32	ccgr3;
+	u32	ccgr4;
+	u32	ccgr5;
+	u32	ccgr6;
+#if defined(CONFIG_MX53)
+	u32	ccgr7;
+#endif
+	u32	cmeor;
+};
+
+/* DPLL registers */
+struct dpll {
+	u32	dp_ctl;
+	u32	dp_config;
+	u32	dp_op;
+	u32	dp_mfd;
+	u32	dp_mfn;
+	u32	dp_mfn_minus;
+	u32	dp_mfn_plus;
+	u32	dp_hfs_op;
+	u32	dp_hfs_mfd;
+	u32	dp_hfs_mfn;
+	u32	dp_mfn_togc;
+	u32	dp_destat;
+};
+/* WEIM registers */
+struct weim {
+	u32	cs0gcr1;
+	u32	cs0gcr2;
+	u32	cs0rcr1;
+	u32	cs0rcr2;
+	u32	cs0wcr1;
+	u32	cs0wcr2;
+	u32	cs1gcr1;
+	u32	cs1gcr2;
+	u32	cs1rcr1;
+	u32	cs1rcr2;
+	u32	cs1wcr1;
+	u32	cs1wcr2;
+	u32	cs2gcr1;
+	u32	cs2gcr2;
+	u32	cs2rcr1;
+	u32	cs2rcr2;
+	u32	cs2wcr1;
+	u32	cs2wcr2;
+	u32	cs3gcr1;
+	u32	cs3gcr2;
+	u32	cs3rcr1;
+	u32	cs3rcr2;
+	u32	cs3wcr1;
+	u32	cs3wcr2;
+	u32	cs4gcr1;
+	u32	cs4gcr2;
+	u32	cs4rcr1;
+	u32	cs4rcr2;
+	u32	cs4wcr1;
+	u32	cs4wcr2;
+	u32	cs5gcr1;
+	u32	cs5gcr2;
+	u32	cs5rcr1;
+	u32	cs5rcr2;
+	u32	cs5wcr1;
+	u32	cs5wcr2;
+	u32	wcr;
+	u32	wiar;
+	u32	ear;
+};
+
+#if defined(CONFIG_MX51)
+struct iomuxc {
+	u32	gpr[2];
+	u32	omux0;
+	u32	omux1;
+	u32	omux2;
+	u32	omux3;
+	u32	omux4;
+};
+#elif defined(CONFIG_MX53)
+struct iomuxc {
+	u32	gpr[3];
+	u32	omux0;
+	u32	omux1;
+	u32	omux2;
+	u32	omux3;
+	u32	omux4;
+};
+#endif
+
+#define IOMUXC_GPR2_BITMAP_SPWG	0
+#define IOMUXC_GPR2_BITMAP_JEIDA	1
+
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET	6
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_MASK	(1 << IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA	(IOMUXC_GPR2_BITMAP_JEIDA << \
+						 IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG	(IOMUXC_GPR2_BITMAP_SPWG << \
+						 IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+
+#define IOMUXC_GPR2_DATA_WIDTH_18	0
+#define IOMUXC_GPR2_DATA_WIDTH_24	1
+
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET	5
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_MASK		(1 << IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT	(IOMUXC_GPR2_DATA_WIDTH_18 << \
+						 IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT	(IOMUXC_GPR2_DATA_WIDTH_24 << \
+						 IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+
+#define IOMUXC_GPR2_MODE_DISABLED	0
+#define IOMUXC_GPR2_MODE_ENABLED_DI0	1
+#define IOMUXC_GPR2_MODE_ENABLED_DI1	3
+
+#define IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET	0
+#define IOMUXC_GPR2_LVDS_CH0_MODE_MASK		(3 << IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED	(IOMUXC_GPR2_MODE_DISABLED << \
+						 IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0	(IOMUXC_GPR2_MODE_ENABLED_DI0 << \
+						 IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI1	(IOMUXC_GPR2_MODE_ENABLED_DI1 << \
+						 IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+
+/* System Reset Controller (SRC) */
+struct src {
+	u32	scr;
+	u32	sbmr;
+	u32	srsr;
+	u32	reserved1[2];
+	u32	sisr;
+	u32	simr;
+};
+
+struct srtc_regs {
+	u32	lpscmr;		/* 0x00 */
+	u32	lpsclr;		/* 0x04 */
+	u32	lpsar;		/* 0x08 */
+	u32	lpsmcr;		/* 0x0c */
+	u32	lpcr;		/* 0x10 */
+	u32	lpsr;		/* 0x14 */
+	u32	lppdr;		/* 0x18 */
+	u32	lpgr;		/* 0x1c */
+	u32	hpcmr;		/* 0x20 */
+	u32	hpclr;		/* 0x24 */
+	u32	hpamr;		/* 0x28 */
+	u32	hpalr;		/* 0x2c */
+	u32	hpcr;		/* 0x30 */
+	u32	hpisr;		/* 0x34 */
+	u32	hpienr;		/* 0x38 */
+};
+
+struct iim_regs {
+	u32	stat;
+	u32	statm;
+	u32     err;
+	u32	emask;
+	u32	fctl;
+	u32	ua;
+	u32	la;
+	u32	sdat;
+	u32	prev;
+	u32	srev;
+	u32	prg_p;
+	u32	scs0;
+	u32	scs1;
+	u32	scs2;
+	u32	scs3;
+	u32	res0[0x1f1];
+	struct fuse_bank {
+		u32	fuse_regs[0x20];
+		u32	fuse_rsvd[0xe0];
+#if defined(CONFIG_MX51)
+	} bank[4];
+#elif defined(CONFIG_MX53)
+	} bank[5];
+#endif
+};
+
+struct fuse_bank0_regs {
+	u32	fuse0_7[8];
+	u32	uid[8];
+	u32	fuse16_23[8];
+#if defined(CONFIG_MX51)
+	u32	imei[8];
+#elif defined(CONFIG_MX53)
+	u32	gp[8];
+#endif
+};
+
+struct fuse_bank1_regs {
+	u32	fuse0_8[9];
+	u32	mac_addr[6];
+	u32	fuse15_31[0x11];
+};
+
+#if defined(CONFIG_MX53)
+struct fuse_bank4_regs {
+	u32	fuse0_4[5];
+	u32	gp[3];
+	u32	fuse8_31[0x18];
+};
+#endif
+
+#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)
+#define PWMCR_DOZEEN		(1 << 24)
+#define PWMCR_WAITEN		(1 << 23)
+#define PWMCR_DBGEN		(1 << 22)
+#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
+#define PWMCR_CLKSRC_IPG	(1 << 16)
+#define PWMCR_EN		(1 << 0)
+
+struct pwm_regs {
+	u32	cr;
+	u32	sr;
+	u32	ir;
+	u32	sar;
+	u32	pr;
+	u32	cnr;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif				/* __ASM_ARCH_MX5_IMX_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx5/iomux-mx51.h b/roms/u-boot/arch/arm/include/asm/arch-mx5/iomux-mx51.h
new file mode 100644
index 000000000..7f8a23848
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx5/iomux-mx51.h
@@ -0,0 +1,241 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2009-2012 Genesi USA, Inc.
+ */
+
+/*
+ * The vast majority of this file is taken from the Linux kernel at
+ * commit 5d23b39
+ */
+
+#ifndef __IOMUX_MX51_H__
+#define __IOMUX_MX51_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+/* Pad control groupings */
+#define MX51_UART_PAD_CTRL	(PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_HYS | PAD_CTL_SRE_FAST)
+#define MX51_I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
+				PAD_CTL_HYS)
+#define MX51_ESDHC_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
+				PAD_CTL_HYS)
+#define MX51_USBH_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
+#define MX51_ECSPI_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_HYS | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
+#define MX51_SDHCI_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
+				PAD_CTL_SRE_FAST | PAD_CTL_DVS)
+#define MX51_GPIO_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST)
+
+#define MX51_PAD_CTRL_2		(PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_4		(PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_5		(PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
+
+/*
+ * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
+ * See also iomux-v3.h
+ */
+
+/*							    PAD    MUX   ALT INPSE PATH PADCTRL */
+enum {
+	MX51_PAD_EIM_D16__USBH2_DATA0		= IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_D17__GPIO2_1		= IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_D17__USBH2_DATA1		= IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_D18__USBH2_DATA2		= IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_D19__USBH2_DATA3		= IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_D20__USBH2_DATA4		= IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_D21__GPIO2_5		= IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_D21__USBH2_DATA5		= IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_D22__USBH2_DATA6		= IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_D23__USBH2_DATA7		= IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_D25__UART3_RXD		= IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL),
+	MX51_PAD_EIM_D26__UART3_TXD		= IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL),
+	MX51_PAD_EIM_D27__GPIO2_9		= IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_A16__GPIO2_10		= IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_A17__GPIO2_11		= IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_A20__GPIO2_14		= IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_A22__GPIO2_16		= IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_A24__USBH2_CLK		= IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_A25__USBH2_DIR		= IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_A26__GPIO2_20		= IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_A26__USBH2_STP		= IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_A27__USBH2_NXT		= IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_EIM_EB2__FEC_MDIO		= IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, PAD_CTL_PUS_22K_UP | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_HYS),
+	MX51_PAD_EIM_EB3__FEC_RDATA1		= IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL),
+	MX51_PAD_EIM_EB3__GPIO2_23		= IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_CS0__GPIO2_25		= IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_CS2__FEC_RDATA2		= IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL),
+	MX51_PAD_EIM_CS2__GPIO2_27		= IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_CS3__FEC_RDATA3		= IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL),
+	MX51_PAD_EIM_CS3__GPIO2_28		= IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_CS4__FEC_RX_ER		= IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2),
+	MX51_PAD_EIM_CS4__GPIO2_29		= IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_EIM_CS5__FEC_CRS		= IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2),
+	MX51_PAD_DRAM_RAS__DRAM_RAS		= IOMUX_PAD(0x4a4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_CAS__DRAM_CAS		= IOMUX_PAD(0x4a8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_SDWE__DRAM_SDWE		= IOMUX_PAD(0x4ac, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_SDCKE0__DRAM_SDCKE0	= IOMUX_PAD(0x4b0, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_SDCKE1__DRAM_SDCKE1	= IOMUX_PAD(0x4b4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_SDCLK__DRAM_SDCLK		= IOMUX_PAD(0x4b8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_SDQS0__DRAM_SDQS0		= IOMUX_PAD(0x4bc, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_SDQS1__DRAM_SDQS1		= IOMUX_PAD(0x4c0, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_SDQS2__DRAM_SDQS2		= IOMUX_PAD(0x4c4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_SDQS3__DRAM_SDQS3		= IOMUX_PAD(0x4c8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_CS0__DRAM_CS0		= IOMUX_PAD(0x4cc, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_CS1__DRAM_CS1		= IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_DQM0__DRAM_DQM0		= IOMUX_PAD(0x4d4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_DQM1__DRAM_DQM1		= IOMUX_PAD(0x4d8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_DQM2__DRAM_DQM2		= IOMUX_PAD(0x4dc, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DRAM_DQM3__DRAM_DQM3		= IOMUX_PAD(0x4e0, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_WE_B__PATA_DIOW		= IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_RE_B__PATA_DIOR		= IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_ALE__PATA_BUFFER_EN	= IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_CLE__PATA_RESET_B	= IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_WP_B__PATA_DMACK		= IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_RB0__PATA_DMARQ		= IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_RB1__PATA_IORDY		= IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_RB2__FEC_COL		= IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2),
+	MX51_PAD_NANDF_RB2__GPIO3_10		= IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_NANDF_RB3__FEC_RX_CLK		= IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2),
+	MX51_PAD_NANDF_RB3__GPIO3_11		= IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_GPIO_NAND__PATA_INTRQ		= IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_CS2__FEC_TX_ER		= IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_NANDF_CS2__PATA_CS_0		= IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_CS3__FEC_MDC		= IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_NANDF_CS3__PATA_CS_1		= IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_CS4__FEC_TDATA1		= IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_NANDF_CS4__PATA_DA_0		= IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_CS5__FEC_TDATA2		= IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_NANDF_CS5__PATA_DA_1		= IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_CS6__FEC_TDATA3		= IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_NANDF_CS6__PATA_DA_2		= IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_CS7__FEC_TX_EN		= IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	= IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4),
+	MX51_PAD_NANDF_D15__GPIO3_25		= IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_NANDF_D15__PATA_DATA15		= IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D14__GPIO3_26		= IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_NANDF_D14__PATA_DATA14		= IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D13__GPIO3_27		= IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_NANDF_D13__PATA_DATA13		= IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D12__PATA_DATA12		= IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D11__FEC_RX_DV		= IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D11__PATA_DATA11		= IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D10__GPIO3_30		= IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_NANDF_D10__PATA_DATA10		= IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D9__FEC_RDATA0		= IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4),
+	MX51_PAD_NANDF_D9__GPIO3_31		= IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_NANDF_D9__PATA_DATA9		= IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D8__FEC_TDATA0		= IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_NANDF_D8__PATA_DATA8		= IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D7__PATA_DATA7		= IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D6__PATA_DATA6		= IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D5__PATA_DATA5		= IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D4__PATA_DATA4		= IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D3__PATA_DATA3		= IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D2__PATA_DATA2		= IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D1__PATA_DATA1		= IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_NANDF_D0__PATA_DATA0		= IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_CSI2_D12__GPIO4_9		= IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_CSI2_D13__GPIO4_10		= IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	= IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+	MX51_PAD_CSPI1_MISO__ECSPI1_MISO	= IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+	MX51_PAD_CSPI1_SS0__ECSPI1_SS0		= IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+	MX51_PAD_CSPI1_SS0__GPIO4_24		= IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_CSPI1_SS1__ECSPI1_SS1		= IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+	MX51_PAD_CSPI1_SS1__GPIO4_25		= IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_CSPI1_RDY__ECSPI1_RDY		= IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+	MX51_PAD_CSPI1_RDY__GPIO4_26		= IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	= IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+	MX51_PAD_UART1_RXD__UART1_RXD		= IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL),
+	MX51_PAD_UART1_TXD__UART1_TXD		= IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL),
+	MX51_PAD_UART1_RTS__UART1_RTS		= IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL),
+	MX51_PAD_UART1_CTS__UART1_CTS		= IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL),
+	MX51_PAD_USBH1_CLK__USBH1_CLK		= IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DIR__USBH1_DIR		= IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_STP__GPIO1_27		= IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_USBH1_STP__USBH1_STP		= IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_NXT__USBH1_NXT		= IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0	= IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1	= IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2	= IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3	= IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4	= IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5	= IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6	= IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7	= IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH_PAD_CTRL),
+	MX51_PAD_DI1_PIN11__ECSPI1_SS2		= IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL),
+	MX51_PAD_DI1_PIN12__GPIO3_1		= IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_DI1_PIN13__GPIO3_2		= IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_DI1_D0_CS__GPIO3_3		= IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_DI1_D1_CS__GPIO3_4		= IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_DISPB2_SER_DIN__GPIO3_5	= IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_DISPB2_SER_DIO__GPIO3_6	= IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_DI1_PIN3__DI1_PIN3		= IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DI1_PIN2__DI1_PIN2		= IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DI2_PIN2__FEC_MDC		= IOMUX_PAD(0x74C, 0x344, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	= IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DI_GP4__DI2_PIN15		= IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_DISP2_DAT6__FEC_TDAT1		= IOMUX_PAD(0x774, 0x36C, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_DISP2_DAT7__FEC_TDAT2		= IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_DISP2_DAT8__FEC_TDAT3		= IOMUX_PAD(0x77C, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_DISP2_DAT9__FEC_TX_EN		= IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_DISP2_DAT10__FEC_COL		= IOMUX_PAD(0x784, 0x37C, 2, 0x94c, 0x1, MX51_PAD_CTRL_2),
+	MX51_PAD_DISP2_DAT11__FEC_RXCLK		= IOMUX_PAD(0x788, 0x380, 2, 0x968, 0x1, MX51_PAD_CTRL_2),
+	MX51_PAD_DISP2_DAT12__FEC_RX_DV		= IOMUX_PAD(0x78C, 0x384, 2, 0x96c, 0x1, MX51_PAD_CTRL_4),
+	MX51_PAD_DISP2_DAT13__FEC_TX_CLK	= IOMUX_PAD(0x790, 0x388, 2, 0x974, 0x1, MX51_PAD_CTRL_4),
+	MX51_PAD_DISP2_DAT14__FEC_RDAT0		= IOMUX_PAD(0x794, 0x38C, 2, 0x958, 0x1, MX51_PAD_CTRL_4),
+	MX51_PAD_DISP2_DAT15__FEC_TDAT0		= IOMUX_PAD(0x798, 0x390, 2, 0x0, 0, MX51_PAD_CTRL_5),
+	MX51_PAD_SD1_CMD__SD1_CMD		= IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_SD1_CLK__SD1_CLK		= IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS),
+	MX51_PAD_SD1_DATA0__SD1_DATA0		= IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_SD1_DATA1__SD1_DATA1		= IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_SD1_DATA2__SD1_DATA2		= IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_SD1_DATA3__SD1_DATA3		= IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_GPIO1_0__GPIO1_0		= IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_GPIO1_0__SD1_CD		= IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL),
+	MX51_PAD_GPIO1_1__SD1_WP		= IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL),
+	MX51_PAD_SD2_CMD__SD2_CMD		= IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_SD2_CLK__SD2_CLK		= IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS),
+	MX51_PAD_SD2_DATA0__SD2_DATA0		= IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_SD2_DATA1__SD2_DATA1		= IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_SD2_DATA2__SD2_DATA2		= IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_SD2_DATA3__SD2_DATA3		= IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL),
+	MX51_PAD_GPIO1_2__GPIO1_2		= IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_GPIO1_2__PWM1_PWMO		= IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL),
+	MX51_PAD_GPIO1_3__GPIO1_3		= IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_GPIO1_5__GPIO1_5		= IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_GPIO1_6__GPIO1_6		= IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_GPIO1_7__GPIO1_7		= IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL),
+	MX51_PAD_GPIO1_7__SD2_WP		= IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL),
+	MX51_PAD_GPIO1_8__SD2_CD		= IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL),
+	MX51_GRP_DDRPKS				= IOMUX_PAD(0x820, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DRAM_B4			= IOMUX_PAD(0x82c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_PKEDDR				= IOMUX_PAD(0x838, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DDR_A0				= IOMUX_PAD(0x83c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DDR_A1				= IOMUX_PAD(0x848, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DDRAPUS			= IOMUX_PAD(0x84c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_HYSDDR0			= IOMUX_PAD(0x85c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_HYSDDR1			= IOMUX_PAD(0x864, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_HYSDDR2			= IOMUX_PAD(0x86c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_HYSDDR3			= IOMUX_PAD(0x874, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DRAM_SR_B0			= IOMUX_PAD(0x878, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DDRAPKS			= IOMUX_PAD(0x87c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DRAM_SR_B1			= IOMUX_PAD(0x880, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DDRPUS				= IOMUX_PAD(0x884, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DRAM_SR_B2			= IOMUX_PAD(0x88c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_PKEADDR			= IOMUX_PAD(0x890, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DRAM_SR_B4			= IOMUX_PAD(0x89c, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_INMODE1			= IOMUX_PAD(0x8a0, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DRAM_B0			= IOMUX_PAD(0x8a4, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DRAM_B1			= IOMUX_PAD(0x8ac, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DRAM_B2			= IOMUX_PAD(0x8b8, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+	MX51_GRP_DDR_SR_A1			= IOMUX_PAD(0x8bc, __NA_, 0, __NA_, 0, NO_PAD_CTRL),
+};
+
+#endif /* __IOMUX_MX51_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx5/iomux-mx53.h b/roms/u-boot/arch/arm/include/asm/arch-mx5/iomux-mx53.h
new file mode 100644
index 000000000..cbc08b0a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx5/iomux-mx53.h
@@ -0,0 +1,1215 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013 ADVANSEE
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on Freescale's Linux i.MX iomux-mx53.h file:
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __IOMUX_MX53_H__
+#define __IOMUX_MX53_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+/* Pad control groupings */
+#define MX53_UART_PAD_CTRL	(PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH | \
+				 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define MX53_SDHC_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+				 PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
+
+/*
+ * The naming convention for the pad modes is MX53_PAD_<padname>__<padmode>
+ * If <padname> refers to a GPIO, it is named GPIO_<unit>
+ * If <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
+ * See also iomux-v3.h
+ */
+
+/*								    PAD    MUX   ALT INPSE PATH PADCTRL */
+enum {
+	MX53_PAD_GPIO_19__KPP_COL_5			= IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_19__GPIO4_5			= IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_19__CCM_CLKO			= IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_19__SPDIF_OUT1			= IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2		= IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_19__ECSPI1_RDY			= IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_19__FEC_TDATA_3			= IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_19__SRC_INT_BOOT			= IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL0__KPP_COL_0			= IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL0__GPIO4_6			= IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC		= IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL0__UART4_TXD_MUX		= IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_KEY_COL0__ECSPI1_SCLK			= IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL0__FEC_RDATA_3			= IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL0__SRC_ANY_PU_RST		= IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW0__KPP_ROW_0			= IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW0__GPIO4_7			= IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD		= IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW0__UART4_RXD_MUX		= IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL),
+	MX53_PAD_KEY_ROW0__ECSPI1_MOSI			= IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW0__FEC_TX_ER			= IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL1__KPP_COL_1			= IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL1__GPIO4_8			= IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS		= IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL1__UART5_TXD_MUX		= IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_KEY_COL1__ECSPI1_MISO			= IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL1__FEC_RX_CLK			= IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL1__USBPHY1_TXREADY		= IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW1__KPP_ROW_1			= IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW1__GPIO4_9			= IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD		= IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW1__UART5_RXD_MUX		= IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL),
+	MX53_PAD_KEY_ROW1__ECSPI1_SS0			= IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW1__FEC_COL			= IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW1__USBPHY1_RXVALID		= IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL2__KPP_COL_2			= IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL2__GPIO4_10			= IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL2__CAN1_TXCAN			= IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL2__FEC_MDIO			= IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL2__ECSPI1_SS1			= IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL2__FEC_RDATA_2			= IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE		= IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW2__KPP_ROW_2			= IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW2__GPIO4_11			= IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW2__CAN1_RXCAN			= IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW2__FEC_MDC			= IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW2__ECSPI1_SS2			= IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW2__FEC_TDATA_2			= IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW2__USBPHY1_RXERROR		= IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL3__KPP_COL_3			= IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL3__GPIO4_12			= IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL3__USBOH3_H2_DP			= IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL3__SPDIF_IN1			= IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL3__I2C2_SCL			= IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL3__ECSPI1_SS3			= IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL3__FEC_CRS			= IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK		= IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW3__KPP_ROW_3			= IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW3__GPIO4_13			= IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW3__USBOH3_H2_DM			= IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK		= IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW3__I2C2_SDA			= IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW3__OSC32K_32K_OUT		= IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW3__CCM_PLL4_BYP			= IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0		= IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL4__KPP_COL_4			= IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL4__GPIO4_14			= IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL4__CAN2_TXCAN			= IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL4__IPU_SISG_4			= IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL4__UART5_RTS			= IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC		= IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1		= IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW4__KPP_ROW_4			= IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW4__GPIO4_15			= IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW4__CAN2_RXCAN			= IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW4__IPU_SISG_5			= IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW4__UART5_CTS			= IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR		= IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID		= IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		= IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_DISP_CLK__GPIO4_16			= IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR		= IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0	= IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0		= IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID		= IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		= IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN15__GPIO4_17			= IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC		= IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1	= IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1		= IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN15__USBPHY1_BVALID		= IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			= IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN2__GPIO4_18			= IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD		= IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2	= IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2		= IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION		= IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			= IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN3__GPIO4_19			= IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS		= IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3	= IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3		= IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN3__USBPHY1_IDDIG		= IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN4__IPU_DI0_PIN4			= IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN4__GPIO4_20			= IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD		= IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN4__ESDHC1_WP			= IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD		= IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4		= IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT	= IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		= IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT0__GPIO4_21			= IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT0__CSPI_SCLK			= IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0	= IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN	= IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5		= IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY		= IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		= IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT1__GPIO4_22			= IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT1__CSPI_MOSI			= IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1	= IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL
+							= IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6		= IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID		= IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		= IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT2__GPIO4_23			= IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT2__CSPI_MISO			= IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2	= IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE		= IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7		= IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE		= IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		= IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT3__GPIO4_24			= IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT3__CSPI_SS0			= IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3	= IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR	= IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8		= IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR		= IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		= IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT4__GPIO4_25			= IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT4__CSPI_SS1			= IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4	= IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB		= IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9		= IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK		= IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		= IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT5__GPIO4_26			= IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT5__CSPI_SS2			= IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5	= IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS	= IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10		= IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0	= IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		= IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT6__GPIO4_27			= IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT6__CSPI_SS3			= IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6	= IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE	= IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11		= IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1	= IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		= IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT7__GPIO4_28			= IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT7__CSPI_RDY			= IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7	= IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0	= IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12		= IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID		= IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		= IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT8__GPIO4_29			= IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT8__PWM1_PWMO			= IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B		= IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1	= IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13		= IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT8__USBPHY2_AVALID		= IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		= IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT9__GPIO4_30			= IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT9__PWM2_PWMO			= IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B		= IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2	= IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14		= IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0		= IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		= IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT10__GPIO4_31			= IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP		= IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3
+							= IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15		= IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1		= IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		= IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT11__GPIO5_5			= IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT		= IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4
+							= IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16		= IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2		= IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		= IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT12__GPIO5_6			= IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK		= IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5
+							= IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17		= IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3		= IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		= IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT13__GPIO5_7			= IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS		= IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0
+							= IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18		= IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4		= IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		= IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT14__GPIO5_8			= IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC		= IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1
+							= IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19		= IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5		= IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		= IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT15__GPIO5_9			= IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT15__ECSPI1_SS1		= IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT15__ECSPI2_SS1		= IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2
+							= IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20		= IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6		= IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		= IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT16__GPIO5_10			= IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT16__ECSPI2_MOSI		= IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC		= IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0		= IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3
+							= IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21		= IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7		= IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		= IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT17__GPIO5_11			= IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT17__ECSPI2_MISO		= IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD		= IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1		= IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4
+							= IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22		= IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		= IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT18__GPIO5_12			= IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT18__ECSPI2_SS0		= IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS		= IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS		= IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5
+							= IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23		= IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2		= IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		= IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT19__GPIO5_13			= IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT19__ECSPI2_SCLK		= IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD		= IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC		= IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6
+							= IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24		= IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3		= IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		= IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT20__GPIO5_14			= IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT20__ECSPI1_SCLK		= IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC		= IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7
+							= IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25		= IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT20__SATA_PHY_TDI		= IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		= IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT21__GPIO5_15			= IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT21__ECSPI1_MOSI		= IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD		= IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0	= IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26		= IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT21__SATA_PHY_TDO		= IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		= IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT22__GPIO5_16			= IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT22__ECSPI1_MISO		= IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS		= IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1	= IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27		= IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT22__SATA_PHY_TCK		= IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		= IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT23__GPIO5_17			= IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT23__ECSPI1_SS0		= IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD		= IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2	= IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28		= IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_DISP0_DAT23__SATA_PHY_TMS		= IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK		= IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_PIXCLK__GPIO5_18			= IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0		= IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29		= IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC		= IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_MCLK__GPIO5_19			= IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK		= IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1		= IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30		= IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_MCLK__TPIU_TRCTL			= IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN		= IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DATA_EN__GPIO5_20			= IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2		= IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31		= IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK		= IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC		= IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_VSYNC__GPIO5_21			= IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3		= IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32		= IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0		= IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4		= IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT4__GPIO5_22			= IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT4__KPP_COL_5			= IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT4__ECSPI1_SCLK			= IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP		= IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC		= IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33		= IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT4__TPIU_TRACE_1		= IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5		= IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT5__GPIO5_23			= IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT5__KPP_ROW_5			= IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT5__ECSPI1_MOSI			= IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT		= IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD		= IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34		= IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT5__TPIU_TRACE_2		= IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6		= IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT6__GPIO5_24			= IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT6__KPP_COL_6			= IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT6__ECSPI1_MISO			= IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK		= IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS		= IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35		= IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT6__TPIU_TRACE_3		= IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7		= IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT7__GPIO5_25			= IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT7__KPP_ROW_6			= IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT7__ECSPI1_SS0			= IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR		= IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD		= IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36		= IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT7__TPIU_TRACE_4		= IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8		= IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT8__GPIO5_26			= IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT8__KPP_COL_7			= IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT8__ECSPI2_SCLK			= IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC		= IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT8__I2C1_SDA			= IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37		= IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT8__TPIU_TRACE_5		= IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9		= IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT9__GPIO5_27			= IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT9__KPP_ROW_7			= IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT9__ECSPI2_MOSI			= IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR		= IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT9__I2C1_SCL			= IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38		= IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT9__TPIU_TRACE_6		= IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10		= IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT10__GPIO5_28			= IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX		= IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT10__ECSPI2_MISO		= IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC		= IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4		= IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39		= IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT10__TPIU_TRACE_7		= IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11		= IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT11__GPIO5_29			= IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX		= IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT11__ECSPI2_SS0			= IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS		= IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5		= IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40		= IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT11__TPIU_TRACE_8		= IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12		= IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT12__GPIO5_30			= IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT12__UART4_TXD_MUX		= IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0	= IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6		= IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41		= IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT12__TPIU_TRACE_9		= IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13		= IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT13__GPIO5_31			= IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT13__UART4_RXD_MUX		= IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1	= IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7		= IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42		= IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT13__TPIU_TRACE_10		= IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14		= IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT14__GPIO6_0			= IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT14__UART5_TXD_MUX		= IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2	= IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8		= IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43		= IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT14__TPIU_TRACE_11		= IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15		= IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT15__GPIO6_1			= IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT15__UART5_RXD_MUX		= IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3	= IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9		= IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44		= IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT15__TPIU_TRACE_12		= IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16		= IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT16__GPIO6_2			= IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT16__UART4_RTS			= IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4	= IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10		= IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45		= IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT16__TPIU_TRACE_13		= IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17		= IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT17__GPIO6_3			= IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT17__UART4_CTS			= IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5	= IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11		= IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46		= IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT17__TPIU_TRACE_14		= IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18		= IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT18__GPIO6_4			= IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT18__UART5_RTS			= IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6	= IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12		= IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47		= IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT18__TPIU_TRACE_15		= IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19		= IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT19__GPIO6_5			= IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT19__UART5_CTS			= IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7	= IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13		= IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48		= IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK		= IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A25__EMI_WEIM_A_25			= IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A25__GPIO5_2			= IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A25__ECSPI2_RDY			= IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A25__IPU_DI1_PIN12			= IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A25__CSPI_SS1			= IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_A25__IPU_DI0_D1_CS			= IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A25__USBPHY1_BISTOK		= IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB2__EMI_WEIM_EB_2			= IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB2__GPIO2_30			= IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK		= IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS		= IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB2__ECSPI1_SS0			= IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB2__I2C2_SCL			= IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D16__EMI_WEIM_D_16			= IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D16__GPIO3_16			= IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D16__IPU_DI0_PIN5			= IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK		= IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D16__ECSPI1_SCLK			= IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL),
+	MX53_PAD_EIM_D16__I2C2_SDA			= IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D17__EMI_WEIM_D_17			= IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D17__GPIO3_17			= IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D17__IPU_DI0_PIN6			= IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN		= IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D17__ECSPI1_MISO			= IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL),
+	MX53_PAD_EIM_D17__I2C3_SCL			= IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D18__EMI_WEIM_D_18			= IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D18__GPIO3_18			= IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D18__IPU_DI0_PIN7			= IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO		= IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D18__ECSPI1_MOSI			= IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL),
+	MX53_PAD_EIM_D18__I2C3_SDA			= IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D18__IPU_DI1_D0_CS			= IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D19__EMI_WEIM_D_19			= IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D19__GPIO3_19			= IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D19__IPU_DI0_PIN8			= IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS		= IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D19__ECSPI1_SS1			= IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL),
+	MX53_PAD_EIM_D19__EPIT1_EPITO			= IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D19__UART1_CTS			= IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D19__USBOH3_USBH2_OC		= IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D20__EMI_WEIM_D_20			= IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D20__GPIO3_20			= IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D20__IPU_DI0_PIN16			= IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D20__IPU_SER_DISP0_CS		= IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D20__CSPI_SS0			= IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D20__EPIT2_EPITO			= IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D20__UART1_RTS			= IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D20__USBOH3_USBH2_PWR		= IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D21__EMI_WEIM_D_21			= IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D21__GPIO3_21			= IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D21__IPU_DI0_PIN17			= IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK		= IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D21__CSPI_SCLK			= IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D21__I2C1_SCL			= IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D21__USBOH3_USBOTG_OC		= IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D22__EMI_WEIM_D_22			= IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D22__GPIO3_22			= IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D22__IPU_DI0_PIN1			= IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN		= IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D22__CSPI_MISO			= IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR		= IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D23__EMI_WEIM_D_23			= IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D23__GPIO3_23			= IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D23__UART3_CTS			= IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D23__UART1_DCD			= IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D23__IPU_DI0_D0_CS			= IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D23__IPU_DI1_PIN2			= IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN		= IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D23__IPU_DI1_PIN14			= IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB3__EMI_WEIM_EB_3			= IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB3__GPIO2_31			= IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB3__UART3_RTS			= IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_EB3__UART1_RI			= IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB3__IPU_DI1_PIN3			= IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC		= IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB3__IPU_DI1_PIN16			= IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D24__EMI_WEIM_D_24			= IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D24__GPIO3_24			= IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D24__UART3_TXD_MUX			= IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D24__ECSPI1_SS2			= IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D24__CSPI_SS2			= IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS		= IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D24__ECSPI2_SS2			= IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D24__UART1_DTR			= IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D25__EMI_WEIM_D_25			= IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D25__GPIO3_25			= IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D25__UART3_RXD_MUX			= IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D25__ECSPI1_SS3			= IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D25__CSPI_SS3			= IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC		= IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D25__ECSPI2_SS3			= IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D25__UART1_DSR			= IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D26__EMI_WEIM_D_26			= IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D26__GPIO3_26			= IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D26__UART2_TXD_MUX			= IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D26__FIRI_RXD			= IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D26__IPU_CSI0_D_1			= IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D26__IPU_DI1_PIN11			= IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D26__IPU_SISG_2			= IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D26__IPU_DISP1_DAT_22		= IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D27__EMI_WEIM_D_27			= IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D27__GPIO3_27			= IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D27__UART2_RXD_MUX			= IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D27__FIRI_TXD			= IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D27__IPU_CSI0_D_0			= IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D27__IPU_DI1_PIN13			= IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D27__IPU_SISG_3			= IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D27__IPU_DISP1_DAT_23		= IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D28__EMI_WEIM_D_28			= IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D28__GPIO3_28			= IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D28__UART2_CTS			= IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO		= IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D28__CSPI_MOSI			= IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D28__I2C1_SDA			= IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D28__IPU_EXT_TRIG			= IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D28__IPU_DI0_PIN13			= IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D29__EMI_WEIM_D_29			= IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D29__GPIO3_29			= IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D29__UART2_RTS			= IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS		= IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D29__CSPI_SS0			= IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL),
+	MX53_PAD_EIM_D29__IPU_DI1_PIN15			= IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D29__IPU_CSI1_VSYNC		= IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D29__IPU_DI0_PIN14			= IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D30__EMI_WEIM_D_30			= IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D30__GPIO3_30			= IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D30__UART3_CTS			= IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D30__IPU_CSI0_D_3			= IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D30__IPU_DI0_PIN11			= IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D30__IPU_DISP1_DAT_21		= IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D30__USBOH3_USBH1_OC		= IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D30__USBOH3_USBH2_OC		= IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_D31__EMI_WEIM_D_31			= IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D31__GPIO3_31			= IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D31__UART3_RTS			= IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL),
+	MX53_PAD_EIM_D31__IPU_CSI0_D_2			= IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D31__IPU_DI0_PIN12			= IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D31__IPU_DISP1_DAT_20		= IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D31__USBOH3_USBH1_PWR		= IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_D31__USBOH3_USBH2_PWR		= IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A24__EMI_WEIM_A_24			= IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A24__GPIO5_4			= IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A24__IPU_DISP1_DAT_19		= IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A24__IPU_CSI1_D_19			= IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A24__IPU_SISG_2			= IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A24__USBPHY2_BVALID		= IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A23__EMI_WEIM_A_23			= IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A23__GPIO6_6			= IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A23__IPU_DISP1_DAT_18		= IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A23__IPU_CSI1_D_18			= IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A23__IPU_SISG_3			= IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A23__USBPHY2_ENDSESSION		= IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A22__EMI_WEIM_A_22			= IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A22__GPIO2_16			= IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A22__IPU_DISP1_DAT_17		= IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A22__IPU_CSI1_D_17			= IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A22__SRC_BT_CFG1_7			= IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A21__EMI_WEIM_A_21			= IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A21__GPIO2_17			= IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A21__IPU_DISP1_DAT_16		= IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A21__IPU_CSI1_D_16			= IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A21__SRC_BT_CFG1_6			= IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A20__EMI_WEIM_A_20			= IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A20__GPIO2_18			= IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A20__IPU_DISP1_DAT_15		= IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A20__IPU_CSI1_D_15			= IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A20__SRC_BT_CFG1_5			= IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A19__EMI_WEIM_A_19			= IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A19__GPIO2_19			= IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A19__IPU_DISP1_DAT_14		= IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A19__IPU_CSI1_D_14			= IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A19__SRC_BT_CFG1_4			= IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A18__EMI_WEIM_A_18			= IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A18__GPIO2_20			= IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A18__IPU_DISP1_DAT_13		= IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A18__IPU_CSI1_D_13			= IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A18__SRC_BT_CFG1_3			= IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A17__EMI_WEIM_A_17			= IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A17__GPIO2_21			= IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A17__IPU_DISP1_DAT_12		= IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A17__IPU_CSI1_D_12			= IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A17__SRC_BT_CFG1_2			= IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A16__EMI_WEIM_A_16			= IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A16__GPIO2_22			= IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK		= IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK		= IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_A16__SRC_BT_CFG1_1			= IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_CS0__EMI_WEIM_CS_0			= IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_CS0__GPIO2_23			= IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_CS0__ECSPI2_SCLK			= IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL),
+	MX53_PAD_EIM_CS0__IPU_DI1_PIN5			= IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1			= IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_CS1__GPIO2_24			= IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_CS1__ECSPI2_MOSI			= IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL),
+	MX53_PAD_EIM_CS1__IPU_DI1_PIN6			= IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_OE__EMI_WEIM_OE			= IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_OE__GPIO2_25			= IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_OE__ECSPI2_MISO			= IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL),
+	MX53_PAD_EIM_OE__IPU_DI1_PIN7			= IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_OE__USBPHY2_IDDIG			= IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_RW__EMI_WEIM_RW			= IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_RW__GPIO2_26			= IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_RW__ECSPI2_SS0			= IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL),
+	MX53_PAD_EIM_RW__IPU_DI1_PIN8			= IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT		= IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_LBA__EMI_WEIM_LBA			= IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_LBA__GPIO2_27			= IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_LBA__ECSPI2_SS1			= IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_LBA__IPU_DI1_PIN17			= IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_LBA__SRC_BT_CFG1_0			= IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB0__EMI_WEIM_EB_0			= IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB0__GPIO2_28			= IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11		= IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB0__IPU_CSI1_D_11			= IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB0__GPC_PMIC_RDY			= IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB0__SRC_BT_CFG2_7			= IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB1__EMI_WEIM_EB_1			= IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB1__GPIO2_29			= IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10		= IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB1__IPU_CSI1_D_10			= IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_EB1__SRC_BT_CFG2_6			= IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0		= IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA0__GPIO3_0			= IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9		= IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA0__IPU_CSI1_D_9			= IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA0__SRC_BT_CFG2_5			= IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1		= IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA1__GPIO3_1			= IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8		= IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA1__IPU_CSI1_D_8			= IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA1__SRC_BT_CFG2_4			= IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2		= IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA2__GPIO3_2			= IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7		= IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA2__IPU_CSI1_D_7			= IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA2__SRC_BT_CFG2_3			= IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3		= IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA3__GPIO3_3			= IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6		= IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA3__IPU_CSI1_D_6			= IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA3__SRC_BT_CFG2_2			= IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4		= IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA4__GPIO3_4			= IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5		= IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA4__IPU_CSI1_D_5			= IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA4__SRC_BT_CFG3_7			= IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5		= IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA5__GPIO3_5			= IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4		= IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA5__IPU_CSI1_D_4			= IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA5__SRC_BT_CFG3_6			= IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6		= IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA6__GPIO3_6			= IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3		= IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA6__IPU_CSI1_D_3			= IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA6__SRC_BT_CFG3_5			= IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7		= IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA7__GPIO3_7			= IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2		= IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA7__IPU_CSI1_D_2			= IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA7__SRC_BT_CFG3_4			= IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8		= IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA8__GPIO3_8			= IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1		= IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA8__IPU_CSI1_D_1			= IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA8__SRC_BT_CFG3_3			= IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9		= IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA9__GPIO3_9			= IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0		= IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA9__IPU_CSI1_D_0			= IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA9__SRC_BT_CFG3_2			= IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10		= IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA10__GPIO3_10			= IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA10__IPU_DI1_PIN15		= IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN		= IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA10__SRC_BT_CFG3_1		= IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11		= IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA11__GPIO3_11			= IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA11__IPU_DI1_PIN2			= IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC		= IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12		= IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA12__GPIO3_12			= IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA12__IPU_DI1_PIN3			= IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC		= IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13		= IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA13__GPIO3_13			= IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA13__IPU_DI1_D0_CS		= IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK		= IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14		= IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA14__GPIO3_14			= IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA14__IPU_DI1_D1_CS		= IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK		= IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15		= IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA15__GPIO3_15			= IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA15__IPU_DI1_PIN1			= IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_DA15__IPU_DI1_PIN4			= IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B		= IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_WE_B__GPIO6_12			= IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B		= IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_RE_B__GPIO6_13			= IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT		= IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_WAIT__GPIO5_0			= IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B		= IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_TX3_P__GPIO6_22			= IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3		= IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_TX2_P__GPIO6_24			= IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2		= IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_CLK_P__GPIO6_26			= IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK		= IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_TX1_P__GPIO6_28			= IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1		= IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_TX0_P__GPIO6_30			= IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0		= IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_TX3_P__GPIO7_22			= IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3		= IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_CLK_P__GPIO7_24			= IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK		= IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_TX2_P__GPIO7_26			= IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2		= IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_TX1_P__GPIO7_28			= IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1		= IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_TX0_P__GPIO7_30			= IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0		= IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_10__GPIO4_0			= IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_10__OSC32k_32K_OUT		= IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_11__GPIO4_1			= IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_12__GPIO4_2			= IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_13__GPIO4_3			= IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_14__GPIO4_4			= IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CLE__EMI_NANDF_CLE		= IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CLE__GPIO6_7			= IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0		= IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_ALE__EMI_NANDF_ALE		= IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_ALE__GPIO6_8			= IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1		= IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B		= IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_WP_B__GPIO6_9			= IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2		= IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0		= IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_RB0__GPIO6_10			= IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3		= IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0		= IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS0__GPIO6_11			= IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4		= IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1		= IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS1__GPIO6_14			= IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS1__MLB_MLBCLK			= IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5		= IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2		= IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS2__GPIO6_15			= IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS2__IPU_SISG_0			= IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS2__ESAI1_TX0			= IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS2__EMI_WEIM_CRE		= IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK		= IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS2__MLB_MLBSIG			= IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6		= IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3		= IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS3__GPIO6_16			= IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS3__IPU_SISG_1			= IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS3__ESAI1_TX1			= IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS3__EMI_WEIM_A_26		= IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS3__MLB_MLBDAT			= IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL),
+	MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7		= IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDIO__FEC_MDIO			= IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDIO__GPIO1_22			= IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDIO__ESAI1_SCKR			= IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDIO__FEC_COL			= IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2		= IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3	= IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49		= IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK		= IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_REF_CLK__GPIO1_23			= IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_REF_CLK__ESAI1_FSR			= IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4	= IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50		= IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RX_ER__FEC_RX_ER			= IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RX_ER__GPIO1_24			= IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RX_ER__ESAI1_HCKR			= IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RX_ER__FEC_RX_CLK			= IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL),
+	MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3		= IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_CRS_DV__FEC_RX_DV			= IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_CRS_DV__GPIO1_25			= IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_CRS_DV__ESAI1_SCKT			= IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD1__FEC_RDATA_1			= IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD1__GPIO1_26			= IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD1__ESAI1_FST			= IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD1__MLB_MLBSIG			= IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1		= IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD0__FEC_RDATA_0			= IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD0__GPIO1_27			= IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD0__ESAI1_HCKT			= IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_RXD0__OSC32k_32K_OUT		= IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TX_EN__FEC_TX_EN			= IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TX_EN__GPIO1_28			= IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2		= IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD1__FEC_TDATA_1			= IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD1__GPIO1_29			= IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3		= IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD1__MLB_MLBCLK			= IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK		= IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD0__FEC_TDATA_0			= IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD0__GPIO1_30			= IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1		= IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0		= IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDC__FEC_MDC			= IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDC__GPIO1_31			= IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDC__ESAI1_TX5_RX0			= IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDC__MLB_MLBDAT			= IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG	= IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1		= IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DIOW__PATA_DIOW			= IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DIOW__GPIO6_17			= IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DIOW__UART1_TXD_MUX		= IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2		= IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DMACK__PATA_DMACK			= IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DMACK__GPIO6_18			= IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DMACK__UART1_RXD_MUX		= IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3		= IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DMARQ__PATA_DMARQ			= IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DMARQ__GPIO7_0			= IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX		= IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0		= IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4		= IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN		= IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_BUFFER_EN__GPIO7_1		= IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX		= IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1		= IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5	= IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_INTRQ__PATA_INTRQ			= IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_INTRQ__GPIO7_2			= IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_INTRQ__UART2_CTS			= IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_INTRQ__CAN1_TXCAN			= IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2		= IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6		= IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DIOR__PATA_DIOR			= IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DIOR__GPIO7_3			= IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DIOR__UART2_RTS			= IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_DIOR__CAN1_RXCAN			= IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL),
+	MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7		= IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B	= IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_RESET_B__GPIO7_4			= IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_RESET_B__ESDHC3_CMD		= IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_RESET_B__UART1_CTS		= IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_RESET_B__CAN2_TXCAN		= IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0	= IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_IORDY__PATA_IORDY			= IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_IORDY__GPIO7_5			= IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_IORDY__ESDHC3_CLK			= IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_IORDY__UART1_RTS			= IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_IORDY__CAN2_RXCAN			= IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL),
+	MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1		= IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_0__PATA_DA_0			= IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_0__GPIO7_6			= IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_0__ESDHC3_RST			= IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_0__OWIRE_LINE			= IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2		= IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_1__PATA_DA_1			= IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_1__GPIO7_7			= IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_1__ESDHC4_CMD			= IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DA_1__UART3_CTS			= IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3		= IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_2__PATA_DA_2			= IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_2__GPIO7_8			= IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DA_2__ESDHC4_CLK			= IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DA_2__UART3_RTS			= IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4		= IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_CS_0__PATA_CS_0			= IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_CS_0__GPIO7_9			= IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_CS_0__UART3_TXD_MUX		= IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5		= IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_CS_1__PATA_CS_1			= IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_CS_1__GPIO7_10			= IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_CS_1__UART3_RXD_MUX		= IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL),
+	MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6		= IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA0__PATA_DATA_0		= IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA0__GPIO2_0			= IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA0__EMI_NANDF_D_0		= IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA0__ESDHC3_DAT4		= IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0	= IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0		= IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7		= IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA1__PATA_DATA_1		= IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA1__GPIO2_1			= IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA1__EMI_NANDF_D_1		= IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA1__ESDHC3_DAT5		= IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1	= IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1		= IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA2__PATA_DATA_2		= IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA2__GPIO2_2			= IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA2__EMI_NANDF_D_2		= IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA2__ESDHC3_DAT6		= IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2	= IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2		= IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA3__PATA_DATA_3		= IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA3__GPIO2_3			= IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA3__EMI_NANDF_D_3		= IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA3__ESDHC3_DAT7		= IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3	= IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3		= IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA4__PATA_DATA_4		= IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA4__GPIO2_4			= IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA4__EMI_NANDF_D_4		= IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA4__ESDHC4_DAT4		= IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4	= IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4		= IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA5__PATA_DATA_5		= IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA5__GPIO2_5			= IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA5__EMI_NANDF_D_5		= IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA5__ESDHC4_DAT5		= IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5	= IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5		= IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA6__PATA_DATA_6		= IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA6__GPIO2_6			= IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA6__EMI_NANDF_D_6		= IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA6__ESDHC4_DAT6		= IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6	= IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6		= IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA7__PATA_DATA_7		= IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA7__GPIO2_7			= IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA7__EMI_NANDF_D_7		= IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA7__ESDHC4_DAT7		= IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7	= IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7		= IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA8__PATA_DATA_8		= IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA8__GPIO2_8			= IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA8__ESDHC1_DAT4		= IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA8__EMI_NANDF_D_8		= IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA8__ESDHC3_DAT0		= IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8	= IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8		= IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA9__PATA_DATA_9		= IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA9__GPIO2_9			= IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA9__ESDHC1_DAT5		= IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA9__EMI_NANDF_D_9		= IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA9__ESDHC3_DAT1		= IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9	= IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9		= IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA10__PATA_DATA_10		= IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA10__GPIO2_10			= IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA10__ESDHC1_DAT6		= IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA10__EMI_NANDF_D_10		= IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA10__ESDHC3_DAT2		= IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10	= IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10		= IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA11__PATA_DATA_11		= IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA11__GPIO2_11			= IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA11__ESDHC1_DAT7		= IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA11__EMI_NANDF_D_11		= IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA11__ESDHC3_DAT3		= IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11	= IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11		= IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA12__PATA_DATA_12		= IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA12__GPIO2_12			= IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA12__ESDHC2_DAT4		= IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA12__EMI_NANDF_D_12		= IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA12__ESDHC4_DAT0		= IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12	= IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12		= IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA13__PATA_DATA_13		= IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA13__GPIO2_13			= IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA13__ESDHC2_DAT5		= IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA13__EMI_NANDF_D_13		= IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA13__ESDHC4_DAT1		= IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13	= IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13		= IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA14__PATA_DATA_14		= IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA14__GPIO2_14			= IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA14__ESDHC2_DAT6		= IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA14__EMI_NANDF_D_14		= IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA14__ESDHC4_DAT2		= IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14	= IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14		= IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA15__PATA_DATA_15		= IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA15__GPIO2_15			= IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA15__ESDHC2_DAT7		= IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA15__EMI_NANDF_D_15		= IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA15__ESDHC4_DAT3		= IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15	= IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15		= IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA0__ESDHC1_DAT0			= IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD1_DATA0__GPIO1_16			= IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA0__GPT_CAPIN1			= IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA0__CSPI_MISO			= IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA0__CCM_PLL3_BYP		= IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA1__ESDHC1_DAT1			= IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD1_DATA1__GPIO1_17			= IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA1__GPT_CAPIN2			= IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA1__CSPI_SS0			= IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA1__CCM_PLL4_BYP		= IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL),
+	MX53_PAD_SD1_CMD__ESDHC1_CMD			= IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD1_CMD__GPIO1_18			= IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_CMD__GPT_CMPOUT1			= IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_CMD__CSPI_MOSI			= IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL),
+	MX53_PAD_SD1_CMD__CCM_PLL1_BYP			= IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA2__ESDHC1_DAT2			= IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD1_DATA2__GPIO1_19			= IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA2__GPT_CMPOUT2			= IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA2__PWM2_PWMO			= IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA2__WDOG1_WDOG_B		= IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA2__CSPI_SS1			= IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB	= IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA2__CCM_PLL2_BYP		= IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_CLK__ESDHC1_CLK			= IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD1_CLK__GPIO1_20			= IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_CLK__OSC32k_32K_OUT		= IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_CLK__GPT_CLKIN			= IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_CLK__CSPI_SCLK			= IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL),
+	MX53_PAD_SD1_CLK__SATA_PHY_DTB_0		= IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA3__ESDHC1_DAT3			= IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD1_DATA3__GPIO1_21			= IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA3__GPT_CMPOUT3			= IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA3__PWM1_PWMO			= IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA3__WDOG2_WDOG_B		= IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA3__CSPI_SS2			= IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB	= IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1		= IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_CLK__ESDHC2_CLK			= IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD2_CLK__GPIO1_10			= IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_CLK__KPP_COL_5			= IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL),
+	MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS		= IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_CLK__CSPI_SCLK			= IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL),
+	MX53_PAD_SD2_CLK__SCC_RANDOM_V			= IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_CMD__ESDHC2_CMD			= IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD2_CMD__GPIO1_11			= IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_CMD__KPP_ROW_5			= IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC		= IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_CMD__CSPI_MOSI			= IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL),
+	MX53_PAD_SD2_CMD__SCC_RANDOM			= IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA3__ESDHC2_DAT3			= IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD2_DATA3__GPIO1_12			= IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA3__KPP_COL_6			= IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC		= IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA3__CSPI_SS2			= IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA3__SJC_DONE			= IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA2__ESDHC2_DAT2			= IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD2_DATA2__GPIO1_13			= IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA2__KPP_ROW_6			= IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD		= IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA2__CSPI_SS1			= IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA2__SJC_FAIL			= IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA1__ESDHC2_DAT1			= IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD2_DATA1__GPIO1_14			= IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA1__KPP_COL_7			= IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS		= IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA1__CSPI_SS0			= IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA1__RTIC_SEC_VIO		= IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA0__ESDHC2_DAT0			= IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL),
+	MX53_PAD_SD2_DATA0__GPIO1_15			= IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA0__KPP_ROW_7			= IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD		= IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA0__CSPI_MISO			= IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL),
+	MX53_PAD_SD2_DATA0__RTIC_DONE_INT		= IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_0__CCM_CLKO			= IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_0__GPIO1_0			= IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_0__KPP_COL_5			= IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL),
+	MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK		= IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_0__EPIT1_EPITO			= IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_0__SRTC_ALARM_DEB			= IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_0__USBOH3_USBH1_PWR		= IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_0__CSU_TD				= IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_1__ESAI1_SCKR			= IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_1__GPIO1_1			= IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_1__KPP_ROW_5			= IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK		= IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_1__PWM2_PWMO			= IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_1__WDOG2_WDOG_B			= IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_1__ESDHC1_CD			= IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_1__SRC_TESTER_ACK			= IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_9__ESAI1_FSR			= IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_9__GPIO1_9			= IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_9__KPP_COL_6			= IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_9__CCM_REF_EN_B			= IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_9__PWM1_PWMO			= IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_9__WDOG1_WDOG_B			= IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_9__ESDHC1_WP			= IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_9__SCC_FAIL_STATE			= IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_3__ESAI1_HCKR			= IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_3__GPIO1_3			= IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_3__I2C3_SCL			= IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_3__DPLLIP1_TOG_EN			= IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_3__CCM_CLKO2			= IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0	= IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_3__USBOH3_USBH1_OC		= IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_3__MLB_MLBCLK			= IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_6__ESAI1_SCKT			= IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_6__GPIO1_6			= IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_6__I2C3_SDA			= IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_6__CCM_CCM_OUT_0			= IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_6__CSU_CSU_INT_DEB		= IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1	= IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_6__ESDHC2_LCTL			= IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_6__MLB_MLBSIG			= IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_2__ESAI1_FST			= IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_2__GPIO1_2			= IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_2__KPP_ROW_6			= IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_2__CCM_CCM_OUT_1			= IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0		= IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2	= IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_2__ESDHC2_WP			= IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_2__MLB_MLBDAT			= IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_4__ESAI1_HCKT			= IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_4__GPIO1_4			= IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_4__KPP_COL_7			= IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_4__CCM_CCM_OUT_2			= IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1		= IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3	= IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_4__ESDHC2_CD			= IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_4__SCC_SEC_STATE			= IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_5__ESAI1_TX2_RX3			= IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_5__GPIO1_5			= IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_5__KPP_ROW_7			= IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_5__CCM_CLKO			= IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2		= IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4	= IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_5__I2C3_SCL			= IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_5__CCM_PLL1_BYP			= IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_7__ESAI1_TX4_RX1			= IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_7__GPIO1_7			= IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_7__EPIT1_EPITO			= IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_7__CAN1_TXCAN			= IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_7__UART2_TXD_MUX			= IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL),
+	MX53_PAD_GPIO_7__FIRI_RXD			= IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_7__SPDIF_PLOCK			= IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_7__CCM_PLL2_BYP			= IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_8__ESAI1_TX5_RX0			= IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_8__GPIO1_8			= IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_8__EPIT2_EPITO			= IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_8__CAN1_RXCAN			= IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL),
+	MX53_PAD_GPIO_8__UART2_RXD_MUX			= IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL),
+	MX53_PAD_GPIO_8__FIRI_TXD			= IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_8__SPDIF_SRCLK			= IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_8__CCM_PLL3_BYP			= IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_16__ESAI1_TX3_RX2			= IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_16__GPIO7_11			= IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT		= IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1		= IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_16__SPDIF_IN1			= IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_16__I2C3_SDA			= IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL),
+	MX53_PAD_GPIO_16__SJC_DE_B			= IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_17__ESAI1_TX0			= IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_17__GPIO7_12			= IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0		= IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_17__GPC_PMIC_RDY			= IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG		= IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_17__SPDIF_OUT1			= IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_17__IPU_SNOOP2			= IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_17__SJC_JTAG_ACT			= IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_18__ESAI1_TX1			= IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_18__GPIO7_13			= IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1		= IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_18__OWIRE_LINE			= IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG	= IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK		= IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL),
+	MX53_PAD_GPIO_18__ESDHC1_LCTL			= IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL),
+	MX53_PAD_GPIO_18__SRC_SYSTEM_RST		= IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL),
+};
+
+#endif /* __IOMUX_MX53_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx5/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-mx5/sys_proto.h
new file mode 100644
index 000000000..c8aff2b65
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx5/sys_proto.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ */
+#ifndef __SYS_PROTO_IMX5_
+#define __SYS_PROTO_IMX5_
+
+#include <asm/mach-imx/sys_proto.h>
+
+#endif /* __SYS_PROTO_IMX5_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/clock.h
new file mode 100644
index 000000000..8ae497157
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/clock.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_SYS_MX6_HCLK
+#define MXC_HCLK	CONFIG_SYS_MX6_HCLK
+#else
+#define MXC_HCLK	24000000
+#endif
+
+#ifdef CONFIG_SYS_MX6_CLK32
+#define MXC_CLK32	CONFIG_SYS_MX6_CLK32
+#else
+#define MXC_CLK32	32768
+#endif
+
+struct cmd_tbl;
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_PER_CLK,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_IPG_PERCLK,
+	MXC_UART_CLK,
+	MXC_CSPI_CLK,
+	MXC_AXI_CLK,
+	MXC_EMI_SLOW_CLK,
+	MXC_DDR_CLK,
+	MXC_ESDHC_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_ESDHC3_CLK,
+	MXC_ESDHC4_CLK,
+	MXC_SATA_CLK,
+	MXC_NFC_CLK,
+	MXC_I2C_CLK,
+};
+
+enum ldb_di_clock {
+	MXC_PLL5_CLK = 0,
+	MXC_PLL2_PFD0_CLK,
+	MXC_PLL2_PFD2_CLK,
+	MXC_MMDC_CH1_CLK,
+	MXC_PLL3_SW_CLK,
+};
+
+enum enet_freq {
+	ENET_25MHZ,
+	ENET_50MHZ,
+	ENET_100MHZ,
+	ENET_125MHZ,
+};
+
+u32 imx_get_uartclk(void);
+u32 imx_get_fecclk(void);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+void setup_gpmi_io_clk(u32 cfg);
+void hab_caam_clock_enable(unsigned char enable);
+void enable_ocotp_clk(unsigned char enable);
+void enable_usboh3_clk(unsigned char enable);
+void enable_uart_clk(unsigned char enable);
+int enable_usdhc_clk(unsigned char enable, unsigned bus_num);
+int enable_sata_clock(void);
+void disable_sata_clock(void);
+int enable_pcie_clock(void);
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
+int enable_spi_clk(unsigned char enable, unsigned spi_num);
+void enable_ipu_clock(void);
+void disable_ipu_clock(void);
+int enable_fec_anatop_clock(int fec_id, enum enet_freq freq);
+void enable_enet_clk(unsigned char enable);
+int enable_lcdif_clock(u32 base_addr, bool enable);
+void enable_qspi_clk(int qspi_num);
+void enable_thermal_clk(void);
+void mxs_set_lcdclk(u32 base_addr, u32 freq);
+void select_ldb_di_clock_source(enum ldb_di_clock clk);
+void enable_eim_clk(unsigned char enable);
+int do_mx6_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[]);
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/crm_regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/crm_regs.h
new file mode 100644
index 000000000..4174f244a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -0,0 +1,1309 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX6_CCM_REGS_H__
+#define __ARCH_ARM_MACH_MX6_CCM_REGS_H__
+
+#define CCM_CCOSR		0x020c4060
+#define CCM_CCGR0		0x020C4068
+#define CCM_CCGR1		0x020C406c
+#define CCM_CCGR2		0x020C4070
+#define CCM_CCGR3		0x020C4074
+#define CCM_CCGR4		0x020C4078
+#define CCM_CCGR5		0x020C407c
+#define CCM_CCGR6		0x020C4080
+
+#define PMU_MISC2		0x020C8170
+
+#ifndef __ASSEMBLY__
+struct mxc_ccm_reg {
+	u32 ccr;	/* 0x0000 */
+	u32 ccdr;
+	u32 csr;
+	u32 ccsr;
+	u32 cacrr;	/* 0x0010*/
+	u32 cbcdr;
+	u32 cbcmr;
+	u32 cscmr1;
+	u32 cscmr2;	/* 0x0020 */
+	u32 cscdr1;
+	u32 cs1cdr;
+	u32 cs2cdr;
+	u32 cdcdr;	/* 0x0030 */
+	u32 chsccdr;
+	u32 cscdr2;
+	u32 cscdr3;
+	u32 cscdr4;	/* 0x0040 */
+	u32 resv0;
+	u32 cdhipr;
+	u32 cdcr;
+	u32 ctor;	/* 0x0050 */
+	u32 clpcr;
+	u32 cisr;
+	u32 cimr;
+	u32 ccosr;	/* 0x0060 */
+	u32 cgpr;
+	u32 CCGR0;
+	u32 CCGR1;
+	u32 CCGR2;	/* 0x0070 */
+	u32 CCGR3;
+	u32 CCGR4;
+	u32 CCGR5;
+	u32 CCGR6;	/* 0x0080 */
+	u32 CCGR7;
+	u32 cmeor;
+	u32 resv[0xfdd];
+	u32 analog_pll_sys;			/* 0x4000 */
+	u32 analog_pll_sys_set;
+	u32 analog_pll_sys_clr;
+	u32 analog_pll_sys_tog;
+	u32 analog_usb1_pll_480_ctrl;		/* 0x4010 */
+	u32 analog_usb1_pll_480_ctrl_set;
+	u32 analog_usb1_pll_480_ctrl_clr;
+	u32 analog_usb1_pll_480_ctrl_tog;
+	u32 analog_reserved0[4];
+	u32 analog_pll_528;			/* 0x4030 */
+	u32 analog_pll_528_set;
+	u32 analog_pll_528_clr;
+	u32 analog_pll_528_tog;
+	u32 analog_pll_528_ss;			/* 0x4040 */
+	u32 analog_reserved1[3];
+	u32 analog_pll_528_num;			/* 0x4050 */
+	u32 analog_reserved2[3];
+	u32 analog_pll_528_denom;		/* 0x4060 */
+	u32 analog_reserved3[3];
+	u32 analog_pll_audio;			/* 0x4070 */
+	u32 analog_pll_audio_set;
+	u32 analog_pll_audio_clr;
+	u32 analog_pll_audio_tog;
+	u32 analog_pll_audio_num;		/* 0x4080*/
+	u32 analog_reserved4[3];
+	u32 analog_pll_audio_denom;		/* 0x4090 */
+	u32 analog_reserved5[3];
+	u32 analog_pll_video;			/* 0x40a0 */
+	u32 analog_pll_video_set;
+	u32 analog_pll_video_clr;
+	u32 analog_pll_video_tog;
+	u32 analog_pll_video_num;		/* 0x40b0 */
+	u32 analog_reserved6[3];
+	u32 analog_pll_video_denom;		/* 0x40c0 */
+	u32 analog_reserved7[7];
+	u32 analog_pll_enet;			/* 0x40e0 */
+	u32 analog_pll_enet_set;
+	u32 analog_pll_enet_clr;
+	u32 analog_pll_enet_tog;
+	u32 analog_pfd_480;			/* 0x40f0 */
+	u32 analog_pfd_480_set;
+	u32 analog_pfd_480_clr;
+	u32 analog_pfd_480_tog;
+	u32 analog_pfd_528;			/* 0x4100 */
+	u32 analog_pfd_528_set;
+	u32 analog_pfd_528_clr;
+	u32 analog_pfd_528_tog;
+	/* PMU Memory Map/Register Definition */
+	u32 pmu_reg_1p1;
+	u32 pmu_reg_1p1_set;
+	u32 pmu_reg_1p1_clr;
+	u32 pmu_reg_1p1_tog;
+	u32 pmu_reg_3p0;
+	u32 pmu_reg_3p0_set;
+	u32 pmu_reg_3p0_clr;
+	u32 pmu_reg_3p0_tog;
+	u32 pmu_reg_2p5;
+	u32 pmu_reg_2p5_set;
+	u32 pmu_reg_2p5_clr;
+	u32 pmu_reg_2p5_tog;
+	u32 pmu_reg_core;
+	u32 pmu_reg_core_set;
+	u32 pmu_reg_core_clr;
+	u32 pmu_reg_core_tog;
+	u32 pmu_misc0;
+	u32 pmu_misc0_set;
+	u32 pmu_misc0_clr;
+	u32 pmu_misc0_tog;
+	u32 pmu_misc1;
+	u32 pmu_misc1_set;
+	u32 pmu_misc1_clr;
+	u32 pmu_misc1_tog;
+	u32 pmu_misc2;
+	u32 pmu_misc2_set;
+	u32 pmu_misc2_clr;
+	u32 pmu_misc2_tog;
+	/* TEMPMON Memory Map/Register Definition */
+	u32 tempsense0;
+	u32 tempsense0_set;
+	u32 tempsense0_clr;
+	u32 tempsense0_tog;
+	u32 tempsense1;
+	u32 tempsense1_set;
+	u32 tempsense1_clr;
+	u32 tempsense1_tog;
+	/* USB Analog Memory Map/Register Definition */
+	u32 usb1_vbus_detect;
+	u32 usb1_vbus_detect_set;
+	u32 usb1_vbus_detect_clr;
+	u32 usb1_vbus_detect_tog;
+	u32 usb1_chrg_detect;
+	u32 usb1_chrg_detect_set;
+	u32 usb1_chrg_detect_clr;
+	u32 usb1_chrg_detect_tog;
+	u32 usb1_vbus_det_stat;
+	u32 usb1_vbus_det_stat_set;
+	u32 usb1_vbus_det_stat_clr;
+	u32 usb1_vbus_det_stat_tog;
+	u32 usb1_chrg_det_stat;
+	u32 usb1_chrg_det_stat_set;
+	u32 usb1_chrg_det_stat_clr;
+	u32 usb1_chrg_det_stat_tog;
+	u32 usb1_loopback;
+	u32 usb1_loopback_set;
+	u32 usb1_loopback_clr;
+	u32 usb1_loopback_tog;
+	u32 usb1_misc;
+	u32 usb1_misc_set;
+	u32 usb1_misc_clr;
+	u32 usb1_misc_tog;
+	u32 usb2_vbus_detect;
+	u32 usb2_vbus_detect_set;
+	u32 usb2_vbus_detect_clr;
+	u32 usb2_vbus_detect_tog;
+	u32 usb2_chrg_detect;
+	u32 usb2_chrg_detect_set;
+	u32 usb2_chrg_detect_clr;
+	u32 usb2_chrg_detect_tog;
+	u32 usb2_vbus_det_stat;
+	u32 usb2_vbus_det_stat_set;
+	u32 usb2_vbus_det_stat_clr;
+	u32 usb2_vbus_det_stat_tog;
+	u32 usb2_chrg_det_stat;
+	u32 usb2_chrg_det_stat_set;
+	u32 usb2_chrg_det_stat_clr;
+	u32 usb2_chrg_det_stat_tog;
+	u32 usb2_loopback;
+	u32 usb2_loopback_set;
+	u32 usb2_loopback_clr;
+	u32 usb2_loopback_tog;
+	u32 usb2_misc;
+	u32 usb2_misc_set;
+	u32 usb2_misc_clr;
+	u32 usb2_misc_tog;
+	u32 digprog;
+	u32 reserved1[7];
+	/* For i.MX 6SoloLite */
+	u32 digprog_sololite;
+};
+#endif
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_RBC_EN				(1 << 27)
+#define MXC_CCM_CCR_REG_BYPASS_CNT_MASK			(0x3F << 21)
+#define MXC_CCM_CCR_REG_BYPASS_CNT_OFFSET		21
+/* CCR_WB does not exist on i.MX6SX/UL */
+#define MXC_CCM_CCR_WB_COUNT_MASK			0x7
+#define MXC_CCM_CCR_WB_COUNT_OFFSET			(1 << 16)
+#define MXC_CCM_CCR_COSC_EN				(1 << 12)
+#ifdef CONFIG_MX6SX
+#define MXC_CCM_CCR_OSCNT_MASK				0x7F
+#else
+#define MXC_CCM_CCR_OSCNT_MASK				0xFF
+#endif
+#define MXC_CCM_CCR_OSCNT_OFFSET			0
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_MMDC_CH1_HS_MASK			(1 << 16)
+#define MXC_CCM_CCDR_MMDC_CH0_HS_MASK			(1 << 17)
+/* Exists on i.MX6QP */
+#define MXC_CCM_CCDR_MMDC_CH1_AXI_ROOT_CG		(1 << 18)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSC_READY				(1 << 5)
+#define MXC_CCM_CSR_REF_EN_B				(1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_PDF_540M_AUTO_DIS			(1 << 15)
+#define MXC_CCM_CCSR_PDF_720M_AUTO_DIS			(1 << 14)
+#define MXC_CCM_CCSR_PDF_454M_AUTO_DIS			(1 << 13)
+#define MXC_CCM_CCSR_PDF_508M_AUTO_DIS			(1 << 12)
+#define MXC_CCM_CCSR_PDF_594M_AUTO_DIS			(1 << 11)
+#define MXC_CCM_CCSR_PDF_352M_AUTO_DIS			(1 << 10)
+#define MXC_CCM_CCSR_PDF_400M_AUTO_DIS			(1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL				(1 << 8)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL			(1 << 2)
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL			(1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL			(1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET			0
+#define MXC_CCM_CACRR_ARM_PODF_MASK			0x7
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK		(0x7 << 27)
+#define MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET		27
+#define MXC_CCM_CBCDR_PERIPH2_CLK_SEL			(1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL			(1 << 25)
+/* MMDC_CH0 not exists on i.MX6SX */
+#define MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK		(0x7 << 19)
+#define MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET		19
+#define MXC_CCM_CBCDR_AXI_PODF_MASK			(0x7 << 16)
+#define MXC_CCM_CBCDR_AXI_PODF_OFFSET			16
+#define MXC_CCM_CBCDR_AHB_PODF_MASK			(0x7 << 10)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET			10
+#define MXC_CCM_CBCDR_IPG_PODF_MASK			(0x3 << 8)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET			8
+#define MXC_CCM_CBCDR_AXI_ALT_SEL			(1 << 7)
+#define MXC_CCM_CBCDR_AXI_SEL				(1 << 6)
+#define MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK		(0x7 << 3)
+#define MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET		3
+#define MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK		(0x7 << 0)
+#define MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET		0
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_GPU3D_SHADER_PODF_MASK		(0x7 << 29)
+#define MXC_CCM_CBCMR_GPU3D_SHADER_PODF_OFFSET		29
+#define MXC_CCM_CBCMR_GPU3D_CORE_PODF_MASK		(0x7 << 26)
+#define MXC_CCM_CBCMR_GPU3D_CORE_PODF_OFFSET		26
+/* LCDIF on i.MX6SX/UL */
+#define MXC_CCM_CBCMR_LCDIF1_PODF_MASK                  (0x7 << 23)
+#define MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET                23
+#define MXC_CCM_CBCMR_GPU2D_CORE_PODF_MASK		(0x7 << 23)
+#define MXC_CCM_CBCMR_GPU2D_CORE_PODF_OFFSET		23
+#define MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK		(0x3 << 21)
+#define MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET	21
+#define MXC_CCM_CBCMR_PERIPH2_CLK2_SEL			(1 << 20)
+#define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK		(0x3 << 18)
+#define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET		18
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK		(0x3 << 16)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET		16
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET		14
+#endif
+#define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET		12
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CBCMR_VDOAXI_CLK_SEL			(1 << 11)
+#endif
+#define MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL			(1 << 10)
+#define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_MASK		(0x3 << 8)
+#define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_OFFSET	8
+#define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_OFFSET		4
+/* Exists on i.MX6QP */
+#define MXC_CCM_CBCMR_PRE_CLK_SEL			(1 << 1)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK		(0x3 << 29)
+#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET		29
+/* QSPI1 exist on i.MX6SX/UL */
+#define MXC_CCM_CSCMR1_QSPI1_PODF_MASK			(0x7 << 26)
+#define MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET		26
+#define MXC_CCM_CSCMR1_ACLK_EMI_MASK			(0x3 << 27)
+#define MXC_CCM_CSCMR1_ACLK_EMI_OFFSET			27
+#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK		(0x7 << 23)
+#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET	23
+/* LCFIF2_PODF on i.MX6SX */
+#define MXC_CCM_CSCMR1_LCDIF2_PODF_MASK			(0x7 << 20)
+#define MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET               20
+/* LCDIF_PIX_PODF on i.MX6SL */
+#define MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK		(0x7 << 20)
+#define MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET		20
+/* ACLK_EMI on i.MX6DQ/SDL/DQP */
+#define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK		(0x7 << 20)
+#define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET		20
+/* CSCMR1_GPMI/BCH exist on i.MX6UL */
+#define MXC_CCM_CSCMR1_GPMI_CLK_SEL			(1 << 19)
+#define MXC_CCM_CSCMR1_BCH_CLK_SEL			(1 << 18)
+#define MXC_CCM_CSCMR1_USDHC4_CLK_SEL			(1 << 19)
+#define MXC_CCM_CSCMR1_USDHC3_CLK_SEL			(1 << 18)
+#define MXC_CCM_CSCMR1_USDHC2_CLK_SEL			(1 << 17)
+#define MXC_CCM_CSCMR1_USDHC1_CLK_SEL			(1 << 16)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL_OFFSET		14
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		12
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 10)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		10
+/* QSPI1 exist on i.MX6SX/UL */
+#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK		(0x7 << 7)
+#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET		7
+/* CSCMR1_PER_CLK exists on i.MX6SX/SL/QP */
+#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6)
+#define MXC_CCM_CSCMR1_PER_CLK_SEL_OFFSET		6
+
+#define MXC_CCM_CSCMR1_PERCLK_PODF_MASK			0x3F
+
+/* Define the bits in register CSCMR2 */
+#ifdef CONFIG_MX6SX
+#define MXC_CCM_CSCMR2_VID_CLK_SEL_MASK			(0x7 << 21)
+#define MXC_CCM_CSCMR2_VID_CLK_SEL_OFFSET		21
+#endif
+#define MXC_CCM_CSCMR2_ESAI_PRE_SEL_MASK		(0x3 << 19)
+#define MXC_CCM_CSCMR2_ESAI_PRE_SEL_OFFSET		19
+#define MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV			(1 << 11)
+#define MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV			(1 << 10)
+/* CSCMR1_CAN_CLK exists on i.MX6SX/QP */
+#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK			(0x3 << 8)
+#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET		8
+
+#define MXC_CCM_CSCMR2_CAN_CLK_PODF_MASK		(0x3F << 2)
+#define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET		2
+
+/* Define the bits in register CSCDR1 */
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CSCDR1_VPU_AXI_PODF_MASK		(0x7 << 25)
+#define MXC_CCM_CSCDR1_VPU_AXI_PODF_OFFSET		25
+#endif
+/* CSCDR1_GPMI/BCH exist on i.MX6UL */
+#define MXC_CCM_CSCDR1_GPMI_PODF_MASK			(0x7 << 22)
+#define MXC_CCM_CSCDR1_GPMI_PODF_OFFSET			22
+#define MXC_CCM_CSCDR1_BCH_PODF_MASK			(0x7 << 19)
+#define MXC_CCM_CSCDR1_BCH_PODF_OFFSET			19
+
+#define MXC_CCM_CSCDR1_USDHC4_PODF_MASK			(0x7 << 22)
+#define MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET		22
+#define MXC_CCM_CSCDR1_USDHC3_PODF_MASK			(0x7 << 19)
+#define MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET		19
+#define MXC_CCM_CSCDR1_USDHC2_PODF_MASK			(0x7 << 16)
+#define MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET		16
+#define MXC_CCM_CSCDR1_USDHC1_PODF_MASK			(0x7 << 11)
+#define MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET		11
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET		8
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK		(0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET		6
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK		(0x3 << 6)
+#endif
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		0x3F
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		0
+/* UART_CLK_SEL exists on i.MX6SL/SX/QP */
+#define MXC_CCM_CSCDR1_UART_CLK_SEL			(1 << 6)
+
+/* Define the bits in register CS1CDR */
+/* MX6UL, !MX6ULL */
+#define MXC_CCM_CS1CDR_SAI3_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS1CDR_SAI3_CLK_PRED_OFFSET		22
+#define MXC_CCM_CS1CDR_SAI3_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS1CDR_SAI3_CLK_PODF_OFFSET		16
+#define MXC_CCM_CS1CDR_SAI1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS1CDR_SAI1_CLK_PRED_OFFSET		6
+#define MXC_CCM_CS1CDR_SAI1_CLK_PODF_MASK		0x3F
+#define MXC_CCM_CS1CDR_SAI1_CLK_PODF_OFFSET		0
+
+#define MXC_CCM_CS1CDR_ESAI_CLK_PODF_MASK		(0x3F << 25)
+#define MXC_CCM_CS1CDR_ESAI_CLK_PODF_OFFSET		25
+#define MXC_CCM_CS1CDR_SSI3_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS1CDR_SSI3_CLK_PRED_OFFSET		22
+#define MXC_CCM_CS1CDR_SSI3_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI3_CLK_PODF_OFFSET		16
+#define MXC_CCM_CS1CDR_ESAI_CLK_PRED_MASK		(0x3 << 9)
+#define MXC_CCM_CS1CDR_ESAI_CLK_PRED_OFFSET		9
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET		6
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK		0x3F
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET		0
+
+/* Define the bits in register CS2CDR */
+/* QSPI2 on i.MX6SX */
+#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK             (0x3F << 21)
+#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF_OFFSET           21
+#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF(v)                       (((v) & 0x3f) << 21)
+#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK             (0x7 << 18)
+#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED_OFFSET           18
+#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED(v)                       (((v) & 0x7) << 18)
+#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK              (0x7 << 15)
+#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL_OFFSET            15
+#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL(v)                        (((v) & 0x7) << 15)
+
+#define MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK		(0x3F << 21)
+#define MXC_CCM_CS2CDR_ENFC_CLK_PODF_OFFSET		21
+#define MXC_CCM_CS2CDR_ENFC_CLK_PODF(v)			(((v) & 0x3f) << 21)
+#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK		(0x7 << 18)
+#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_OFFSET		18
+#define MXC_CCM_CS2CDR_ENFC_CLK_PRED(v)			(((v) & 0x7) << 18)
+
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK_DQP		(0x7 << 15)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET_DQP		15
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_DQP(v)		(((v) & 0x7) << 15)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK_DQ		(0x3 << 16)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET_DQ		16
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_DQ(v)		(((v) & 0x3) << 16)
+
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK		\
+	((is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) ?	\
+	 MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK_DQP :		\
+	 MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK_DQ)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET		\
+	((is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) ?	\
+	 MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET_DQP :	\
+	 MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET_DQ)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v)			\
+	((is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) ?	\
+	 MXC_CCM_CS2CDR_ENFC_CLK_SEL_DQP(v) :		\
+	 MXC_CCM_CS2CDR_ENFC_CLK_SEL_DQ(v))
+
+#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK		(0x7 << 12)
+#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET		12
+#define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK		(0x7 << 9)
+#define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET		9
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET		6
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK		0x3F
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET		0
+
+/* Define the bits in register CDCDR */
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CDCDR_HSI_TX_PODF_MASK			(0x7 << 29)
+#define MXC_CCM_CDCDR_HSI_TX_PODF_OFFSET		29
+#define MXC_CCM_CDCDR_HSI_TX_CLK_SEL			(1 << 28)
+#endif
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET		25
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK		(0x7 << 22)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET		22
+#define MXC_CCM_CDCDR_SPDIF0_CLK_SEL_MASK		(0x3 << 20)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_SEL_OFFSET		20
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK		(0x7 << 12)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET		12
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK		(0x7 << 9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET		9
+#define MXC_CCM_CDCDR_SPDIF1_CLK_SEL_MASK		(0x3 << 7)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_SEL_OFFSET		7
+
+/* Define the bits in register CHSCCDR */
+/* i.MX6SX */
+#define MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK		(0x7 << 15)
+#define MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET		15
+#define MXC_CCM_CHSCCDR_ENET_PODF_MASK			(0x7 << 12)
+#define MXC_CCM_CHSCCDR_ENET_PODF_OFFSET		12
+#define MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK		(0x7 << 9)
+#define MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET		9
+#define MXC_CCM_CHSCCDR_M4_PRE_CLK_SEL_MASK		(0x7 << 6)
+#define MXC_CCM_CHSCCDR_M4_PRE_CLK_SEL_OFFSET		6
+#define MXC_CCM_CHSCCDR_M4_PODF_MASK			(0x7 << 3)
+#define MXC_CCM_CHSCCDR_M4_PODF_OFFSET			3
+#define MXC_CCM_CHSCCDR_M4_CLK_SEL_MASK			(0x7)
+#define MXC_CCM_CHSCCDR_M4_CLK_SEL_OFFSET		0
+
+#define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_MASK	(0x7 << 15)
+#define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_OFFSET	15
+#define MXC_CCM_CHSCCDR_IPU1_DI1_PODF_MASK		(0x7 << 12)
+#define MXC_CCM_CHSCCDR_IPU1_DI1_PODF_OFFSET		12
+#define MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_MASK		(0x7 << 9)
+#define MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET		9
+#define MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK	(0x7 << 6)
+#define MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET	6
+#define MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK		(0x7 << 3)
+#define MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET		3
+#define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK		(0x7)
+#define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET		0
+
+/* i.MX6ULL */
+#define MXC_CCM_CHSCCDR_EPDC_PRE_CLK_SEL_MASK		(0x7 << 15)
+#define MXC_CCM_CHSCCDR_EPDC_PRE_CLK_SEL_OFFSET		15
+#define MXC_CCM_CHSCCDR_EPDC_PODF_MASK			(0x7 << 12)
+#define MXC_CCM_CHSCCDR_EPDC_PODF_OFFSET		12
+#define MXC_CCM_CHSCCDR_EPDC_CLK_SEL_MASK		(0x7 << 9)
+#define MXC_CCM_CHSCCDR_EPDC_CLK_SEL_OFFSET		9
+
+#define CHSCCDR_CLK_SEL_LDB_DI0				3
+#define CHSCCDR_PODF_DIVIDE_BY_3			2
+#define CHSCCDR_IPU_PRE_CLK_540M_PFD			5
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET		19
+/* ECSPI_CLK_SEL exists on i.MX6SX/SL/QP */
+#define MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK		(0x1 << 18)
+/* LCDIF1 on i.MX6SX/UL */
+#define MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK             (0x7 << 15)
+#define MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET           15
+#define MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK              (0x7 << 12)
+#define MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET            12
+#define MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK              (0x7 << 9)
+#define MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_OFFSET            9
+/* LCDIF2 on i.MX6SX */
+#define MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK             (0x7 << 6)
+#define MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_OFFSET           6
+#define MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK              (0x7 << 3)
+#define MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET            3
+#define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK              (0x7 << 0)
+#define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_OFFSET             0
+
+/*LCD on i.MX6SL */
+#define MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET		6
+#define MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK		(0x7 << 3)
+#define MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET		3
+
+/* All IPU2_DI1 are LCDIF1 on MX6SX */
+#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK	(0x7 << 15)
+#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET	15
+#define MXC_CCM_CHSCCDR_IPU2_DI1_PODF_MASK		(0x7 << 12)
+#define MXC_CCM_CHSCCDR_IPU2_DI1_PODF_OFFSET		12
+#define MXC_CCM_CHSCCDR_IPU2_DI1_CLK_SEL_MASK		(0x7 << 9)
+#define MXC_CCM_CHSCCDR_IPU2_DI1_CLK_SEL_OFFSET		9
+/* All IPU2_DI0 are LCDIF2 on MX6SX */
+#define MXC_CCM_CHSCCDR_IPU2_DI0_PRE_CLK_SEL_MASK	(0x7 << 6)
+#define MXC_CCM_CHSCCDR_IPU2_DI0_PRE_CLK_SEL_OFFSET	6
+#define MXC_CCM_CHSCCDR_IPU2_DI0_PODF_MASK		(0x7 << 3)
+#define MXC_CCM_CHSCCDR_IPU2_DI0_PODF_OFFSET		3
+#define MXC_CCM_CHSCCDR_IPU2_DI0_CLK_SEL_MASK		0x7
+#define MXC_CCM_CHSCCDR_IPU2_DI0_CLK_SEL_OFFSET		0
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_IPU2_HSP_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR3_IPU2_HSP_PODF_OFFSET		16
+#define MXC_CCM_CSCDR3_IPU2_HSP_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR3_IPU2_HSP_CLK_SEL_OFFSET		14
+#define MXC_CCM_CSCDR3_IPU1_HSP_PODF_MASK		(0x7 << 11)
+#define MXC_CCM_CSCDR3_IPU1_HSP_PODF_OFFSET		11
+#define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_MASK		(0x3 << 9)
+#define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_OFFSET		9
+
+/* For i.MX6SL */
+#define MXC_CCM_CSCDR3_LCDIF_AXI_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR3_LCDIF_AXI_PODF_OFFSET		16
+#define MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET		14
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CDHIPR_MMDC_CH0_PODF_BUSY		(1 << 4)
+#endif
+#define MXC_CCM_CDHIPR_PERIPH2_CLK_SEL_BUSY		(1 << 3)
+#define MXC_CCM_CDHIPR_MMDC_CH1_PODF_BUSY		(1 << 2)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY			(1 << 1)
+#define MXC_CCM_CDHIPR_AXI_PODF_BUSY			1
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_MASK_L2CC_IDLE			(1 << 27)
+#define MXC_CCM_CLPCR_MASK_SCU_IDLE			(1 << 26)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CLPCR_MASK_CORE3_WFI			(1 << 25)
+#define MXC_CCM_CLPCR_MASK_CORE2_WFI			(1 << 24)
+#define MXC_CCM_CLPCR_MASK_CORE1_WFI			(1 << 23)
+#endif
+#define MXC_CCM_CLPCR_MASK_CORE0_WFI			(1 << 22)
+#define MXC_CCM_CLPCR_BYP_MMDC_CH1_LPM_HS		(1 << 21)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CLPCR_BYP_MMDC_CH0_LPM_HS		(1 << 19)
+#define MXC_CCM_CLPCR_WB_CORE_AT_LPM			(1 << 17)
+#endif
+#define MXC_CCM_CLPCR_WB_PER_AT_LPM			(1 << 16)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN			(1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK			(0x3 << 9)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET			9
+#define MXC_CCM_CLPCR_VSTBY				(1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC			(1 << 7)
+#define MXC_CCM_CLPCR_SBYOS				(1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM		(1 << 5)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK			(0x3 << 3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET		3
+#define MXC_CCM_CLPCR_BYPASS_PMIC_VFUNC_READY		(1 << 2)
+#endif
+#define MXC_CCM_CLPCR_LPM_MASK				0x3
+#define MXC_CCM_CLPCR_LPM_OFFSET			0
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED			(1 << 26)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CISR_MMDC_CH0_PODF_LOADED		(1 << 23)
+#endif
+#define MXC_CCM_CISR_PERIPH_CLK_SEL_LOADED		(1 << 22)
+#define MXC_CCM_CISR_MMDC_CH1_PODF_LOADED		(1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED			(1 << 20)
+#define MXC_CCM_CISR_PERIPH2_CLK_SEL_LOADED		(1 << 19)
+#define MXC_CCM_CISR_AXI_PODF_LOADED			(1 << 17)
+#define MXC_CCM_CISR_COSC_READY				(1 << 6)
+#define MXC_CCM_CISR_LRF_PLL				1
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED		(1 << 26)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CIMR_MASK_MMDC_CH0_PODF_LOADED		(1 << 23)
+#endif
+#define MXC_CCM_CIMR_MASK_PERIPH_CLK_SEL_LOADED		(1 << 22)
+#define MXC_CCM_CIMR_MASK_MMDC_CH1_PODF_LOADED		(1 << 21)
+#define MXC_CCM_CIMR_MASK_AHB_PODF_LOADED		(1 << 20)
+#define MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED	(1 << 19)
+#define MXC_CCM_CIMR_MASK_AXI_PODF_LOADED		(1 << 17)
+#define MXC_CCM_CIMR_MASK_COSC_READY			(1 << 6)
+#define MXC_CCM_CIMR_MASK_LRF_PLL			1
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET			(1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK			(0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET			21
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET			16
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK			(0x1F << 16)
+#define MXC_CCM_CCOSR_CLK_OUT_SEL			(0x1 << 8)
+#define MXC_CCM_CCOSR_CKOL_EN				(0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK			(0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET			4
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK			0xF
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET			0
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_FAST_PLL_EN			(1 << 16)
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE		(1 << 4)
+#define MXC_CCM_CGPR_MMDC_EXT_CLK_DIS			(1 << 2)
+#define MXC_CCM_CGPR_PMIC_DELAY_SCALER			1
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGR_CG_MASK				3
+
+/* i.MX 6ULL */
+#define MXC_CCM_CCGR0_DCP_CLK_OFFSET		10
+#define MXC_CCM_CCGR0_DCP_CLK_MASK		(3 << MXC_CCM_CCGR0_DCP_CLK_OFFSET)
+#define MXC_CCM_CCGR0_ENET_CLK_ENABLE_OFFSET	12
+#define MXC_CCM_CCGR0_ENET_CLK_ENABLE_MASK	(3 << MXC_CCM_CCGR0_ENET_CLK_ENABLE_OFFSET)
+
+#define MXC_CCM_CCGR0_AIPS_TZ1_OFFSET			0
+#define MXC_CCM_CCGR0_AIPS_TZ1_MASK			(3 << MXC_CCM_CCGR0_AIPS_TZ1_OFFSET)
+#define MXC_CCM_CCGR0_AIPS_TZ2_OFFSET			2
+#define MXC_CCM_CCGR0_AIPS_TZ2_MASK			(3 << MXC_CCM_CCGR0_AIPS_TZ2_OFFSET)
+#define MXC_CCM_CCGR0_APBHDMA_OFFSET			4
+#define MXC_CCM_CCGR0_APBHDMA_MASK			(3 << MXC_CCM_CCGR0_APBHDMA_OFFSET)
+#define MXC_CCM_CCGR0_ASRC_OFFSET			6
+#define MXC_CCM_CCGR0_ASRC_MASK				(3 << MXC_CCM_CCGR0_ASRC_OFFSET)
+#define MXC_CCM_CCGR0_CAAM_SECURE_MEM_OFFSET		8
+#define MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK		(3 << MXC_CCM_CCGR0_CAAM_SECURE_MEM_OFFSET)
+#define MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_OFFSET		10
+#define MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK		(3 << MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_OFFSET)
+#define MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_OFFSET		12
+#define MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK		(3 << MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_OFFSET)
+#define MXC_CCM_CCGR0_CAN1_OFFSET			14
+#define MXC_CCM_CCGR0_CAN1_MASK				(3 << MXC_CCM_CCGR0_CAN1_OFFSET)
+#define MXC_CCM_CCGR0_CAN1_SERIAL_OFFSET		16
+#define MXC_CCM_CCGR0_CAN1_SERIAL_MASK			(3 << MXC_CCM_CCGR0_CAN1_SERIAL_OFFSET)
+#define MXC_CCM_CCGR0_CAN2_OFFSET			18
+#define MXC_CCM_CCGR0_CAN2_MASK				(3 << MXC_CCM_CCGR0_CAN2_OFFSET)
+#define MXC_CCM_CCGR0_CAN2_SERIAL_OFFSET		20
+#define MXC_CCM_CCGR0_CAN2_SERIAL_MASK			(3 << MXC_CCM_CCGR0_CAN2_SERIAL_OFFSET)
+#define MXC_CCM_CCGR0_CHEETAH_DBG_CLK_OFFSET		22
+#define MXC_CCM_CCGR0_CHEETAH_DBG_CLK_MASK		(3 << MXC_CCM_CCGR0_CHEETAH_DBG_CLK_OFFSET)
+#define MXC_CCM_CCGR0_DCIC1_OFFSET			24
+#define MXC_CCM_CCGR0_DCIC1_MASK			(3 << MXC_CCM_CCGR0_DCIC1_OFFSET)
+#define MXC_CCM_CCGR0_DCIC2_OFFSET			26
+#define MXC_CCM_CCGR0_DCIC2_MASK			(3 << MXC_CCM_CCGR0_DCIC2_OFFSET)
+#ifdef CONFIG_MX6SX
+#define MXC_CCM_CCGR0_AIPS_TZ3_OFFSET			30
+#define MXC_CCM_CCGR0_AIPS_TZ3_MASK			(3 << MXC_CCM_CCGR0_AIPS_TZ3_OFFSET)
+#else
+#define MXC_CCM_CCGR0_DTCP_OFFSET			28
+#define MXC_CCM_CCGR0_DTCP_MASK				(3 << MXC_CCM_CCGR0_DTCP_OFFSET)
+#endif
+
+#define MXC_CCM_CCGR1_ECSPI1S_OFFSET			0
+#define MXC_CCM_CCGR1_ECSPI1S_MASK			(3 << MXC_CCM_CCGR1_ECSPI1S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI2S_OFFSET			2
+#define MXC_CCM_CCGR1_ECSPI2S_MASK			(3 << MXC_CCM_CCGR1_ECSPI2S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI3S_OFFSET			4
+#define MXC_CCM_CCGR1_ECSPI3S_MASK			(3 << MXC_CCM_CCGR1_ECSPI3S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI4S_OFFSET			6
+#define MXC_CCM_CCGR1_ECSPI4S_MASK			(3 << MXC_CCM_CCGR1_ECSPI4S_OFFSET)
+#define MXC_CCM_CCGR1_ECSPI5S_OFFSET			8
+#define MXC_CCM_CCGR1_ECSPI5S_MASK			(3 << MXC_CCM_CCGR1_ECSPI5S_OFFSET)
+/* CCGR1_ENET does not exist on i.MX6SX/UL */
+#define MXC_CCM_CCGR1_ENET_OFFSET			10
+#define MXC_CCM_CCGR1_ENET_MASK				(3 << MXC_CCM_CCGR1_ENET_OFFSET)
+#define MXC_CCM_CCGR1_EPIT1S_OFFSET			12
+#define MXC_CCM_CCGR1_EPIT1S_MASK			(3 << MXC_CCM_CCGR1_EPIT1S_OFFSET)
+#define MXC_CCM_CCGR1_EPIT2S_OFFSET			14
+#define MXC_CCM_CCGR1_EPIT2S_MASK			(3 << MXC_CCM_CCGR1_EPIT2S_OFFSET)
+#define MXC_CCM_CCGR1_ESAIS_OFFSET			16
+#define MXC_CCM_CCGR1_ESAIS_MASK			(3 << MXC_CCM_CCGR1_ESAIS_OFFSET)
+#ifdef CONFIG_MX6SX
+#define MXC_CCM_CCGR1_WAKEUP_OFFSET			18
+#define MXC_CCM_CCGR1_WAKEUP_MASK			(3 << MXC_CCM_CCGR1_WAKEUP_OFFSET)
+#endif
+#define MXC_CCM_CCGR1_GPT_BUS_OFFSET			20
+#define MXC_CCM_CCGR1_GPT_BUS_MASK			(3 << MXC_CCM_CCGR1_GPT_BUS_OFFSET)
+#define MXC_CCM_CCGR1_GPT_SERIAL_OFFSET			22
+#define MXC_CCM_CCGR1_GPT_SERIAL_MASK			(3 << MXC_CCM_CCGR1_GPT_SERIAL_OFFSET)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CCGR1_GPU2D_OFFSET			24
+#define MXC_CCM_CCGR1_GPU2D_MASK			(3 << MXC_CCM_CCGR1_GPU2D_OFFSET)
+#endif
+#define MXC_CCM_CCGR1_GPU3D_OFFSET			26
+#define MXC_CCM_CCGR1_GPU3D_MASK			(3 << MXC_CCM_CCGR1_GPU3D_OFFSET)
+#ifdef CONFIG_MX6SX
+#define MXC_CCM_CCGR1_OCRAM_S_OFFSET			28
+#define MXC_CCM_CCGR1_OCRAM_S_MASK			(3 << MXC_CCM_CCGR1_OCRAM_S_OFFSET)
+#define MXC_CCM_CCGR1_CANFD_OFFSET			30
+#define MXC_CCM_CCGR1_CANFD_MASK			(3 << MXC_CCM_CCGR1_CANFD_OFFSET)
+#endif
+
+#define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET		0
+#define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK		(3 << MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET)
+/* i.MX6SX/UL */
+#define MXC_CCM_CCGR2_CSI_OFFSET			2
+#define MXC_CCM_CCGR2_CSI_MASK				(3 << MXC_CCM_CCGR2_CSI_OFFSET)
+
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET		4
+#define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK		(3 << MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET)
+#endif
+#define MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET		6
+#define MXC_CCM_CCGR2_I2C1_SERIAL_MASK			(3 << MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET)
+#define MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET		8
+#define MXC_CCM_CCGR2_I2C2_SERIAL_MASK			(3 << MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET)
+#define MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET		10
+#define MXC_CCM_CCGR2_I2C3_SERIAL_MASK			(3 << MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET)
+#define MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET		8
+#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK			(3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET)
+#define MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET			12
+#define MXC_CCM_CCGR2_OCOTP_CTRL_MASK			(3 << MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET)
+#define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET		14
+#define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK		(3 << MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET)
+#define MXC_CCM_CCGR2_IPMUX1_OFFSET			16
+#define MXC_CCM_CCGR2_IPMUX1_MASK			(3 << MXC_CCM_CCGR2_IPMUX1_OFFSET)
+#define MXC_CCM_CCGR2_IPMUX2_OFFSET			18
+#define MXC_CCM_CCGR2_IPMUX2_MASK			(3 << MXC_CCM_CCGR2_IPMUX2_OFFSET)
+#define MXC_CCM_CCGR2_IPMUX3_OFFSET			20
+#define MXC_CCM_CCGR2_IPMUX3_MASK			(3 << MXC_CCM_CCGR2_IPMUX3_OFFSET)
+#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET	22
+#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK	(3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET)
+/* i.MX6SX/UL LCD and PXP */
+#define MXC_CCM_CCGR2_LCD_OFFSET			28
+#define MXC_CCM_CCGR2_LCD_MASK				(3 << MXC_CCM_CCGR2_LCD_OFFSET)
+#define MXC_CCM_CCGR2_PXP_OFFSET			30
+#define MXC_CCM_CCGR2_PXP_MASK				(3 << MXC_CCM_CCGR2_PXP_OFFSET)
+
+#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET	24
+#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK	(3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET)
+#define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET	26
+#define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK	(3 << MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET)
+
+/* i.MX6ULL */
+#define MXC_CCM_CCGR2_ESAI_CLK_OFFSET		0
+#define MXC_CCM_CCGR2_ESAI_CLK_MASK		(3 << MXC_CCM_CCGR2_ESAI_CLK_OFFSET)
+#define MXC_CCM_CCGR2_IOMUXC_SNVS_CLK_OFFSET	4
+#define MXC_CCM_CCGR2_IOMUXC_SNVS_CLK_MASK	(3 << MXC_CCM_CCGR2_IOMUXC_SNVS_CLK_OFFSET)
+
+/* Exist on i.MX6SX */
+#define MXC_CCM_CCGR3_M4_OFFSET					2
+#define MXC_CCM_CCGR3_M4_MASK					(3 << MXC_CCM_CCGR3_M4_OFFSET)
+/* i.MX6ULL */
+#define MXC_CCM_CCGR3_EPDC_CLK_ENABLE_OFFSET			4
+#define MXC_CCM_CCGR3_EPDC_CLK_ENABLE_MASK			(3 << MXC_CCM_CCGR3_EPDC_CLK_ENABLE_OFFSET)
+#define MXC_CCM_CCGR3_ENET_OFFSET				4
+#define MXC_CCM_CCGR3_ENET_MASK					(3 << MXC_CCM_CCGR3_ENET_OFFSET)
+#define MXC_CCM_CCGR3_QSPI_OFFSET				14
+#define MXC_CCM_CCGR3_QSPI_MASK					(3 << MXC_CCM_CCGR3_QSPI_OFFSET)
+
+/* i.MX6SL */
+#define MXC_CCM_CCGR3_LCDIF_AXI_OFFSET				6
+#define MXC_CCM_CCGR3_LCDIF_AXI_MASK				(3 << MXC_CCM_CCGR3_LCDIF_AXI_OFFSET)
+#define MXC_CCM_CCGR3_LCDIF_PIX_OFFSET				8
+#define MXC_CCM_CCGR3_LCDIF_PIX_MASK				(3 << MXC_CCM_CCGR3_LCDIF_PIX_OFFSET)
+
+#define MXC_CCM_CCGR3_IPU1_IPU_OFFSET				0
+#define MXC_CCM_CCGR3_IPU1_IPU_MASK				(3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET)
+#define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET			2
+#define MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK				(3 << MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET)
+#define MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET			4
+#define MXC_CCM_CCGR3_IPU1_IPU_DI1_MASK				(3 << MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET)
+
+#define MXC_CCM_CCGR3_IPU2_IPU_OFFSET				6
+#define MXC_CCM_CCGR3_IPU2_IPU_MASK				(3 << MXC_CCM_CCGR3_IPU2_IPU_OFFSET)
+#define MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET			8
+#define MXC_CCM_CCGR3_IPU2_IPU_DI0_MASK				(3 << MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET)
+#define MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET			10
+#define MXC_CCM_CCGR3_IPU2_IPU_DI1_MASK				(3 << MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET)
+#define MXC_CCM_CCGR3_LDB_DI0_OFFSET				12
+#define MXC_CCM_CCGR3_LDB_DI0_MASK				(3 << MXC_CCM_CCGR3_LDB_DI0_OFFSET)
+
+/* QSPI1 exists on i.MX6SX/UL */
+#define MXC_CCM_CCGR3_QSPI1_OFFSET				14
+#define MXC_CCM_CCGR3_QSPI1_MASK				(3 << MXC_CCM_CCGR3_QSPI1_OFFSET)
+
+#define MXC_CCM_CCGR3_LDB_DI1_OFFSET				14
+#define MXC_CCM_CCGR3_LDB_DI1_MASK				(3 << MXC_CCM_CCGR3_LDB_DI1_OFFSET)
+#define MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET			16
+#define MXC_CCM_CCGR3_MIPI_CORE_CFG_MASK			(3 << MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET)
+
+/* A7_CLKDIV/WDOG1 on i.MX6UL */
+#define MXC_CCM_CCGR3_WDOG1_CLK_ENABLE_OFFSET			16
+#define MXC_CCM_CCGR3_WDOG1_CLK_ENABLE_MASK			(3 << MXC_CCM_CCGR3_WDOG1_CLK_ENABLE_OFFSET)
+#define MXC_CCM_CCGR3_A7_CLKDIV_PATCH_OFFSET			18
+#define MXC_CCM_CCGR3_A7_CLKDIV_PATCH_MASK			(3 << MXC_CCM_CCGR3_A7_CLKDIV_PATCH_OFFSET)
+
+#define MXC_CCM_CCGR3_MLB_OFFSET				18
+#define MXC_CCM_CCGR3_MLB_MASK					(3 << MXC_CCM_CCGR3_MLB_OFFSET)
+#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET	20
+#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK		(3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET	22
+#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK		(3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET)
+#endif
+#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET		24
+#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK			(3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET)
+#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET		26
+#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK			(3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET)
+
+#define MXC_CCM_CCGR3_DISP_AXI_OFFSET                           6
+#define MXC_CCM_CCGR3_DISP_AXI_MASK                             (3 << MXC_CCM_CCGR3_DISP_AXI_OFFSET)
+#define MXC_CCM_CCGR3_LCDIF2_PIX_OFFSET                         8
+#define MXC_CCM_CCGR3_LCDIF2_PIX_MASK                           (3 << MXC_CCM_CCGR3_LCDIF2_PIX_OFFSET)
+#define MXC_CCM_CCGR3_LCDIF1_PIX_OFFSET                         10
+#define MXC_CCM_CCGR3_LCDIF1_PIX_MASK                           (3 << MXC_CCM_CCGR3_LCDIF1_PIX_OFFSET)
+/* AXI on i.MX6UL */
+#define MXC_CCM_CCGR3_AXI_CLK_OFFSET				28
+#define MXC_CCM_CCGR3_AXI_CLK_MASK				(3 << MXC_CCM_CCGR3_AXI_CLK_OFFSET)
+#define MXC_CCM_CCGR3_OCRAM_OFFSET				28
+#define MXC_CCM_CCGR3_OCRAM_MASK				(3 << MXC_CCM_CCGR3_OCRAM_OFFSET)
+
+/* GPIO4 on i.MX6UL/ULL */
+#define MXC_CCM_CCGR3_GPIO4_CLK_OFFSET				30
+#define MXC_CCM_CCGR3_GPIO4_CLK_MASK				(3 << MXC_CCM_CCGR3_GPIO4_CLK_OFFSET)
+
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET			30
+#define MXC_CCM_CCGR3_OPENVGAXICLK_MASK				(3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET)
+#endif
+
+/* i.MX6ULL */
+#define MXC_CCM_CCGR3_IOMUXC_SNVS_GPR_CLK_OFFSET		30
+#define MXC_CCM_CCGR3_IOMUXC_SNVS_GPR_CLK_MASK			(3 << MXC_CCM_CCGR3_IOMUXC_SNVS_GPR_CLK_OFFSET)
+
+#define MXC_CCM_CCGR4_PCIE_OFFSET				0
+#define MXC_CCM_CCGR4_PCIE_MASK					(3 << MXC_CCM_CCGR4_PCIE_OFFSET)
+/* QSPI2 on i.MX6SX */
+#define MXC_CCM_CCGR4_QSPI2_ENFC_OFFSET				10
+#define MXC_CCM_CCGR4_QSPI2_ENFC_MASK				(3 << MXC_CCM_CCGR4_QSPI2_ENFC_OFFSET)
+#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET		8
+#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK			(3 << MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET)
+#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET			12
+#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK			(3 << MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET)
+#define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET	14
+#define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_MASK	(3 << MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET)
+#define MXC_CCM_CCGR4_PWM1_OFFSET				16
+#define MXC_CCM_CCGR4_PWM1_MASK					(3 << MXC_CCM_CCGR4_PWM1_OFFSET)
+#define MXC_CCM_CCGR4_PWM2_OFFSET				18
+#define MXC_CCM_CCGR4_PWM2_MASK					(3 << MXC_CCM_CCGR4_PWM2_OFFSET)
+#define MXC_CCM_CCGR4_PWM3_OFFSET				20
+#define MXC_CCM_CCGR4_PWM3_MASK					(3 << MXC_CCM_CCGR4_PWM3_OFFSET)
+#define MXC_CCM_CCGR4_PWM4_OFFSET				22
+#define MXC_CCM_CCGR4_PWM4_MASK					(3 << MXC_CCM_CCGR4_PWM4_OFFSET)
+#define MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_OFFSET		24
+#define MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK		(3 << MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_OFFSET)
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_OFFSET	26
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK		(3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_OFFSET)
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_OFFSET	28
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK	(3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_OFFSET)
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_OFFSET		30
+#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK		(3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_OFFSET)
+
+#define MXC_CCM_CCGR5_ROM_OFFSET			0
+#define MXC_CCM_CCGR5_ROM_MASK				(3 << MXC_CCM_CCGR5_ROM_OFFSET)
+#ifndef CONFIG_MX6SX
+#define MXC_CCM_CCGR5_SATA_OFFSET			4
+#define MXC_CCM_CCGR5_SATA_MASK				(3 << MXC_CCM_CCGR5_SATA_OFFSET)
+#endif
+#define MXC_CCM_CCGR5_SDMA_OFFSET			6
+#define MXC_CCM_CCGR5_SDMA_MASK				(3 << MXC_CCM_CCGR5_SDMA_OFFSET)
+#define MXC_CCM_CCGR5_SPBA_OFFSET			12
+#define MXC_CCM_CCGR5_SPBA_MASK				(3 << MXC_CCM_CCGR5_SPBA_OFFSET)
+#define MXC_CCM_CCGR5_SPDIF_OFFSET			14
+#define MXC_CCM_CCGR5_SPDIF_MASK			(3 << MXC_CCM_CCGR5_SPDIF_OFFSET)
+#define MXC_CCM_CCGR5_SSI1_OFFSET			18
+#define MXC_CCM_CCGR5_SSI1_MASK				(3 << MXC_CCM_CCGR5_SSI1_OFFSET)
+#define MXC_CCM_CCGR5_SSI2_OFFSET			20
+#define MXC_CCM_CCGR5_SSI2_MASK				(3 << MXC_CCM_CCGR5_SSI2_OFFSET)
+#define MXC_CCM_CCGR5_SSI3_OFFSET			22
+#define MXC_CCM_CCGR5_SSI3_MASK				(3 << MXC_CCM_CCGR5_SSI3_OFFSET)
+#define MXC_CCM_CCGR5_UART_OFFSET			24
+#define MXC_CCM_CCGR5_UART_MASK				(3 << MXC_CCM_CCGR5_UART_OFFSET)
+#define MXC_CCM_CCGR5_UART_SERIAL_OFFSET		26
+#define MXC_CCM_CCGR5_UART_SERIAL_MASK			(3 << MXC_CCM_CCGR5_UART_SERIAL_OFFSET)
+#ifdef CONFIG_MX6SX
+#define MXC_CCM_CCGR5_SAI1_OFFSET			20
+#define MXC_CCM_CCGR5_SAI1_MASK				(3 << MXC_CCM_CCGR5_SAI1_OFFSET)
+#define MXC_CCM_CCGR5_SAI2_OFFSET			30
+#define MXC_CCM_CCGR5_SAI2_MASK				(3 << MXC_CCM_CCGR5_SAI2_OFFSET)
+#endif
+
+/* PRG_CLK0 exists on i.MX6QP */
+#define MXC_CCM_CCGR6_PRG_CLK0_MASK		(3 << 24)
+
+#define MXC_CCM_CCGR6_USBOH3_OFFSET		0
+#define MXC_CCM_CCGR6_USBOH3_MASK		(3 << MXC_CCM_CCGR6_USBOH3_OFFSET)
+#define MXC_CCM_CCGR6_USDHC1_OFFSET		2
+#define MXC_CCM_CCGR6_USDHC1_MASK		(3 << MXC_CCM_CCGR6_USDHC1_OFFSET)
+#define MXC_CCM_CCGR6_USDHC2_OFFSET		4
+#define MXC_CCM_CCGR6_USDHC2_MASK		(3 << MXC_CCM_CCGR6_USDHC2_OFFSET)
+#define MXC_CCM_CCGR6_SIM1_CLK_OFFSET		6
+#define MXC_CCM_CCGR6_SIM1_CLK_MASK		(3 << MXC_CCM_CCGR6_SIM1_CLK_OFFSET)
+#define MXC_CCM_CCGR6_SIM2_CLK_OFFSET		8
+#define MXC_CCM_CCGR6_SIM2_CLK_MASK		(3 << MXC_CCM_CCGR6_SIM2_CLK_OFFSET)
+/* i.MX6ULL */
+#define MXC_CCM_CCGR6_IPMUX4_CLK_OFFSET		8
+#define MXC_CCM_CCGR6_IPMUX4_CLK_MASK		(3 << MXC_CCM_CCGR6_IPMUX4_CLK_OFFSET)
+/* GPMI/BCH on i.MX6UL */
+#define MXC_CCM_CCGR6_BCH_OFFSET		6
+#define MXC_CCM_CCGR6_BCH_MASK			(3 << MXC_CCM_CCGR6_BCH_OFFSET)
+#define MXC_CCM_CCGR6_GPMI_OFFSET		8
+#define MXC_CCM_CCGR6_GPMI_MASK		(3 << MXC_CCM_CCGR6_GPMI_OFFSET)
+
+#define MXC_CCM_CCGR6_USDHC3_OFFSET		6
+#define MXC_CCM_CCGR6_USDHC3_MASK		(3 << MXC_CCM_CCGR6_USDHC3_OFFSET)
+#define MXC_CCM_CCGR6_USDHC4_OFFSET		8
+#define MXC_CCM_CCGR6_USDHC4_MASK		(3 << MXC_CCM_CCGR6_USDHC4_OFFSET)
+#define MXC_CCM_CCGR6_EMI_SLOW_OFFSET		10
+#define MXC_CCM_CCGR6_EMI_SLOW_MASK		(3 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET)
+/* i.MX6ULL */
+#define MXC_CCM_CCGR6_AIPS_TZ3_CLK_OFFSET	18
+#define MXC_CCM_CCGR6_AIPS_TZ3_CLK_MASK		(3 << MXC_CCM_CCGR6_AIPS_TZ3_CLK_OFFSET)
+/* The following *CCGR6* exist only i.MX6SX */
+#define MXC_CCM_CCGR6_PWM8_OFFSET		16
+#define MXC_CCM_CCGR6_PWM8_MASK			(3 << MXC_CCM_CCGR6_PWM8_OFFSET)
+#define MXC_CCM_CCGR6_VADC_OFFSET		20
+#define MXC_CCM_CCGR6_VADC_MASK			(3 << MXC_CCM_CCGR6_VADC_OFFSET)
+#define MXC_CCM_CCGR6_GIS_OFFSET		22
+#define MXC_CCM_CCGR6_GIS_MASK			(3 << MXC_CCM_CCGR6_GIS_OFFSET)
+#define MXC_CCM_CCGR6_I2C4_OFFSET		24
+#define MXC_CCM_CCGR6_I2C4_MASK			(3 << MXC_CCM_CCGR6_I2C4_OFFSET)
+#define MXC_CCM_CCGR6_PWM5_OFFSET		26
+#define MXC_CCM_CCGR6_PWM5_MASK			(3 << MXC_CCM_CCGR6_PWM5_OFFSET)
+#define MXC_CCM_CCGR6_PWM6_OFFSET		28
+#define MXC_CCM_CCGR6_PWM6_MASK			(3 << MXC_CCM_CCGR6_PWM6_OFFSET)
+#define MXC_CCM_CCGR6_PWM7_OFFSET		30
+#define MXC_CCM_CCGR6_PWM7_MASK			(3 << MXC_CCM_CCGR6_PWM7_OFFSET)
+/* The two does not exist on i.MX6SX */
+#define MXC_CCM_CCGR6_VDOAXICLK_OFFSET		12
+#define MXC_CCM_CCGR6_VDOAXICLK_MASK		(3 << MXC_CCM_CCGR6_VDOAXICLK_OFFSET)
+
+#define BM_ANADIG_PLL_SYS_LOCK 0x80000000
+#define BP_ANADIG_PLL_SYS_RSVD0      20
+#define BM_ANADIG_PLL_SYS_RSVD0 0x7FF00000
+#define BF_ANADIG_PLL_SYS_RSVD0(v)  \
+	(((v) << 20) & BM_ANADIG_PLL_SYS_RSVD0)
+#define BM_ANADIG_PLL_SYS_PLL_SEL 0x00080000
+#define BM_ANADIG_PLL_SYS_LVDS_24MHZ_SEL 0x00040000
+#define BM_ANADIG_PLL_SYS_LVDS_SEL 0x00020000
+#define BM_ANADIG_PLL_SYS_BYPASS 0x00010000
+#define BP_ANADIG_PLL_SYS_BYPASS_CLK_SRC      14
+#define BM_ANADIG_PLL_SYS_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_SYS_BYPASS_CLK_SRC(v)  \
+	(((v) << 14) & BM_ANADIG_PLL_SYS_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_SYS_BYPASS_CLK_SRC__OSC_24M  0x0
+#define BV_ANADIG_PLL_SYS_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_SYS_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_SYS_BYPASS_CLK_SRC__XOR      0x3
+#define BM_ANADIG_PLL_SYS_ENABLE 0x00002000
+#define BM_ANADIG_PLL_SYS_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_SYS_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_SYS_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_SYS_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_SYS_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_SYS_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_SYS_DIV_SELECT      0
+#define BM_ANADIG_PLL_SYS_DIV_SELECT 0x0000007F
+#define BF_ANADIG_PLL_SYS_DIV_SELECT(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_SYS_DIV_SELECT)
+
+#define BM_ANADIG_USB1_PLL_480_CTRL_LOCK 0x80000000
+#define BP_ANADIG_USB1_PLL_480_CTRL_RSVD1      17
+#define BM_ANADIG_USB1_PLL_480_CTRL_RSVD1 0x7FFE0000
+#define BF_ANADIG_USB1_PLL_480_CTRL_RSVD1(v)  \
+	(((v) << 17) & BM_ANADIG_USB1_PLL_480_CTRL_RSVD1)
+#define BM_ANADIG_USB1_PLL_480_CTRL_BYPASS 0x00010000
+#define BP_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC      14
+#define BM_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC(v)  \
+	(((v) << 14) & BM_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC)
+#define BV_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC__OSC_24M  0x0
+#define BV_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC__XOR      0x3
+#define BM_ANADIG_USB1_PLL_480_CTRL_ENABLE 0x00002000
+#define BM_ANADIG_USB1_PLL_480_CTRL_POWER 0x00001000
+#define BM_ANADIG_USB1_PLL_480_CTRL_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_USB1_PLL_480_CTRL_DOUBLE_CP 0x00000400
+#define BM_ANADIG_USB1_PLL_480_CTRL_HALF_CP 0x00000200
+#define BM_ANADIG_USB1_PLL_480_CTRL_DOUBLE_LF 0x00000100
+#define BM_ANADIG_USB1_PLL_480_CTRL_HALF_LF 0x00000080
+#define BM_ANADIG_USB1_PLL_480_CTRL_EN_USB_CLKS 0x00000040
+#define BM_ANADIG_USB1_PLL_480_CTRL_RSVD0 0x00000020
+#define BP_ANADIG_USB1_PLL_480_CTRL_CONTROL0      2
+#define BM_ANADIG_USB1_PLL_480_CTRL_CONTROL0 0x0000001C
+#define BF_ANADIG_USB1_PLL_480_CTRL_CONTROL0(v)  \
+	(((v) << 2) & BM_ANADIG_USB1_PLL_480_CTRL_CONTROL0)
+#define BP_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT      0
+#define BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT 0x00000003
+#define BF_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT(v)  \
+	(((v) << 0) & BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT)
+
+#define BM_ANADIG_PLL_528_LOCK 0x80000000
+#define BP_ANADIG_PLL_528_RSVD1      19
+#define BM_ANADIG_PLL_528_RSVD1 0x7FF80000
+#define BF_ANADIG_PLL_528_RSVD1(v)  \
+	(((v) << 19) & BM_ANADIG_PLL_528_RSVD1)
+#define BM_ANADIG_PLL_528_PFD_OFFSET_EN 0x00040000
+#define BM_ANADIG_PLL_528_DITHER_ENABLE 0x00020000
+#define BM_ANADIG_PLL_528_BYPASS 0x00010000
+#define BP_ANADIG_PLL_528_BYPASS_CLK_SRC      14
+#define BM_ANADIG_PLL_528_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_528_BYPASS_CLK_SRC(v)  \
+	(((v) << 14) & BM_ANADIG_PLL_528_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_528_BYPASS_CLK_SRC__OSC_24M  0x0
+#define BV_ANADIG_PLL_528_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_528_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_528_BYPASS_CLK_SRC__XOR      0x3
+#define BM_ANADIG_PLL_528_ENABLE 0x00002000
+#define BM_ANADIG_PLL_528_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_528_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_528_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_528_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_528_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_528_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_528_RSVD0      1
+#define BM_ANADIG_PLL_528_RSVD0 0x0000007E
+#define BF_ANADIG_PLL_528_RSVD0(v)  \
+	(((v) << 1) & BM_ANADIG_PLL_528_RSVD0)
+#define BM_ANADIG_PLL_528_DIV_SELECT 0x00000001
+
+#define BP_ANADIG_PLL_528_SS_STOP      16
+#define BM_ANADIG_PLL_528_SS_STOP 0xFFFF0000
+#define BF_ANADIG_PLL_528_SS_STOP(v) \
+	(((v) << 16) & BM_ANADIG_PLL_528_SS_STOP)
+#define BM_ANADIG_PLL_528_SS_ENABLE 0x00008000
+#define BP_ANADIG_PLL_528_SS_STEP      0
+#define BM_ANADIG_PLL_528_SS_STEP 0x00007FFF
+#define BF_ANADIG_PLL_528_SS_STEP(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_528_SS_STEP)
+
+#define BP_ANADIG_PLL_528_NUM_RSVD0      30
+#define BM_ANADIG_PLL_528_NUM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_528_NUM_RSVD0(v) \
+	(((v) << 30) & BM_ANADIG_PLL_528_NUM_RSVD0)
+#define BP_ANADIG_PLL_528_NUM_A      0
+#define BM_ANADIG_PLL_528_NUM_A 0x3FFFFFFF
+#define BF_ANADIG_PLL_528_NUM_A(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_528_NUM_A)
+
+#define BP_ANADIG_PLL_528_DENOM_RSVD0      30
+#define BM_ANADIG_PLL_528_DENOM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_528_DENOM_RSVD0(v) \
+	(((v) << 30) & BM_ANADIG_PLL_528_DENOM_RSVD0)
+#define BP_ANADIG_PLL_528_DENOM_B      0
+#define BM_ANADIG_PLL_528_DENOM_B 0x3FFFFFFF
+#define BF_ANADIG_PLL_528_DENOM_B(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_528_DENOM_B)
+
+#define BM_ANADIG_PLL_AUDIO_LOCK 0x80000000
+#define BP_ANADIG_PLL_AUDIO_RSVD0      22
+#define BM_ANADIG_PLL_AUDIO_RSVD0 0x7FC00000
+#define BF_ANADIG_PLL_AUDIO_RSVD0(v)  \
+	(((v) << 22) & BM_ANADIG_PLL_AUDIO_RSVD0)
+#define BM_ANADIG_PLL_AUDIO_SSC_EN 0x00200000
+#define BP_ANADIG_PLL_AUDIO_TEST_DIV_SELECT      19
+#define BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT 0x00180000
+#define BF_ANADIG_PLL_AUDIO_TEST_DIV_SELECT(v)  \
+	(((v) << 19) & BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT)
+#define BM_ANADIG_PLL_AUDIO_PFD_OFFSET_EN 0x00040000
+#define BM_ANADIG_PLL_AUDIO_DITHER_ENABLE 0x00020000
+#define BM_ANADIG_PLL_AUDIO_BYPASS 0x00010000
+#define BP_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC      14
+#define BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC(v)  \
+	(((v) << 14) & BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC__OSC_24M  0x0
+#define BV_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC__XOR      0x3
+#define BM_ANADIG_PLL_AUDIO_ENABLE 0x00002000
+#define BM_ANADIG_PLL_AUDIO_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_AUDIO_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_AUDIO_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_AUDIO_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_AUDIO_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_AUDIO_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_AUDIO_DIV_SELECT      0
+#define BM_ANADIG_PLL_AUDIO_DIV_SELECT 0x0000007F
+#define BF_ANADIG_PLL_AUDIO_DIV_SELECT(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_AUDIO_DIV_SELECT)
+
+#define BP_ANADIG_PLL_AUDIO_NUM_RSVD0      30
+#define BM_ANADIG_PLL_AUDIO_NUM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_AUDIO_NUM_RSVD0(v) \
+	(((v) << 30) & BM_ANADIG_PLL_AUDIO_NUM_RSVD0)
+#define BP_ANADIG_PLL_AUDIO_NUM_A      0
+#define BM_ANADIG_PLL_AUDIO_NUM_A 0x3FFFFFFF
+#define BF_ANADIG_PLL_AUDIO_NUM_A(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_AUDIO_NUM_A)
+
+#define BP_ANADIG_PLL_AUDIO_DENOM_RSVD0      30
+#define BM_ANADIG_PLL_AUDIO_DENOM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_AUDIO_DENOM_RSVD0(v) \
+	(((v) << 30) & BM_ANADIG_PLL_AUDIO_DENOM_RSVD0)
+#define BP_ANADIG_PLL_AUDIO_DENOM_B      0
+#define BM_ANADIG_PLL_AUDIO_DENOM_B 0x3FFFFFFF
+#define BF_ANADIG_PLL_AUDIO_DENOM_B(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_AUDIO_DENOM_B)
+
+#define BM_ANADIG_PLL_VIDEO_LOCK 0x80000000
+#define BP_ANADIG_PLL_VIDEO_RSVD0      22
+#define BM_ANADIG_PLL_VIDEO_RSVD0 0x7FC00000
+#define BF_ANADIG_PLL_VIDEO_RSVD0(v)  \
+	(((v) << 22) & BM_ANADIG_PLL_VIDEO_RSVD0)
+#define BM_ANADIG_PLL_VIDEO_SSC_EN 0x00200000
+#define BP_ANADIG_PLL_VIDEO_POST_DIV_SELECT      19
+#define BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT 0x00180000
+#define BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(v)  \
+	(((v) << 19) & BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT)
+#define BM_ANADIG_PLL_VIDEO_PFD_OFFSET_EN 0x00040000
+#define BM_ANADIG_PLL_VIDEO_DITHER_ENABLE 0x00020000
+#define BM_ANADIG_PLL_VIDEO_BYPASS 0x00010000
+#define BP_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC      14
+#define BM_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC(v)  \
+	(((v) << 14) & BM_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC__OSC_24M  0x0
+#define BV_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC__XOR      0x3
+#define BM_ANADIG_PLL_VIDEO_ENABLE 0x00002000
+#define BM_ANADIG_PLL_VIDEO_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_VIDEO_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_VIDEO_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_VIDEO_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_VIDEO_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_VIDEO_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_VIDEO_DIV_SELECT      0
+#define BM_ANADIG_PLL_VIDEO_DIV_SELECT 0x0000007F
+#define BF_ANADIG_PLL_VIDEO_DIV_SELECT(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_VIDEO_DIV_SELECT)
+
+#define BP_ANADIG_PLL_VIDEO_NUM_RSVD0      30
+#define BM_ANADIG_PLL_VIDEO_NUM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_VIDEO_NUM_RSVD0(v) \
+	(((v) << 30) & BM_ANADIG_PLL_VIDEO_NUM_RSVD0)
+#define BP_ANADIG_PLL_VIDEO_NUM_A      0
+#define BM_ANADIG_PLL_VIDEO_NUM_A 0x3FFFFFFF
+#define BF_ANADIG_PLL_VIDEO_NUM_A(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_VIDEO_NUM_A)
+
+#define BP_ANADIG_PLL_VIDEO_DENOM_RSVD0      30
+#define BM_ANADIG_PLL_VIDEO_DENOM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_VIDEO_DENOM_RSVD0(v) \
+	(((v) << 30) & BM_ANADIG_PLL_VIDEO_DENOM_RSVD0)
+#define BP_ANADIG_PLL_VIDEO_DENOM_B      0
+#define BM_ANADIG_PLL_VIDEO_DENOM_B 0x3FFFFFFF
+#define BF_ANADIG_PLL_VIDEO_DENOM_B(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_VIDEO_DENOM_B)
+
+#define BM_ANADIG_PLL_ENET_LOCK 0x80000000
+#define BP_ANADIG_PLL_ENET_RSVD1      21
+#define BM_ANADIG_PLL_ENET_RSVD1 0x7FE00000
+#define BF_ANADIG_PLL_ENET_RSVD1(v)  \
+	(((v) << 21) & BM_ANADIG_PLL_ENET_RSVD1)
+#define BM_ANADIG_PLL_ENET_REF_25M_ENABLE 0x00200000
+#define BM_ANADIG_PLL_ENET_ENABLE_SATA 0x00100000
+#define BM_ANADIG_PLL_ENET_ENABLE_PCIE 0x00080000
+#define BM_ANADIG_PLL_ENET_PFD_OFFSET_EN 0x00040000
+#define BM_ANADIG_PLL_ENET_DITHER_ENABLE 0x00020000
+#define BM_ANADIG_PLL_ENET_BYPASS 0x00010000
+#define BP_ANADIG_PLL_ENET_BYPASS_CLK_SRC      14
+#define BM_ANADIG_PLL_ENET_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_ENET_BYPASS_CLK_SRC(v)  \
+	(((v) << 14) & BM_ANADIG_PLL_ENET_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_ENET_BYPASS_CLK_SRC__OSC_24M  0x0
+#define BV_ANADIG_PLL_ENET_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_ENET_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_ENET_BYPASS_CLK_SRC__XOR      0x3
+#define BM_ANADIG_PLL_ENET_ENABLE 0x00002000
+#define BM_ANADIG_PLL_ENET_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_ENET_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_ENET_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_ENET_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_ENET_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_ENET_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_ENET_RSVD0      2
+#define BM_ANADIG_PLL_ENET_RSVD0 0x0000007C
+#define BF_ANADIG_PLL_ENET_RSVD0(v)  \
+	(((v) << 2) & BM_ANADIG_PLL_ENET_RSVD0)
+#define BP_ANADIG_PLL_ENET_DIV_SELECT      0
+#define BM_ANADIG_PLL_ENET_DIV_SELECT 0x00000003
+#define BF_ANADIG_PLL_ENET_DIV_SELECT(v)  \
+	(((v) << 0) & BM_ANADIG_PLL_ENET_DIV_SELECT)
+
+/* ENET2 for i.MX6SX/UL */
+#define BM_ANADIG_PLL_ENET2_ENABLE 0x00100000
+#define BM_ANADIG_PLL_ENET2_DIV_SELECT 0x0000000C
+#define BF_ANADIG_PLL_ENET2_DIV_SELECT(v)  \
+	(((v) << 2) & BM_ANADIG_PLL_ENET2_DIV_SELECT)
+
+#define BM_ANADIG_PFD_480_PFD3_CLKGATE 0x80000000
+#define BM_ANADIG_PFD_480_PFD3_STABLE 0x40000000
+#define BP_ANADIG_PFD_480_PFD3_FRAC      24
+#define BM_ANADIG_PFD_480_PFD3_FRAC 0x3F000000
+#define BF_ANADIG_PFD_480_PFD3_FRAC(v)  \
+	(((v) << 24) & BM_ANADIG_PFD_480_PFD3_FRAC)
+#define BM_ANADIG_PFD_480_PFD2_CLKGATE 0x00800000
+#define BM_ANADIG_PFD_480_PFD2_STABLE 0x00400000
+#define BP_ANADIG_PFD_480_PFD2_FRAC      16
+#define BM_ANADIG_PFD_480_PFD2_FRAC 0x003F0000
+#define BF_ANADIG_PFD_480_PFD2_FRAC(v)  \
+	(((v) << 16) & BM_ANADIG_PFD_480_PFD2_FRAC)
+#define BM_ANADIG_PFD_480_PFD1_CLKGATE 0x00008000
+#define BM_ANADIG_PFD_480_PFD1_STABLE 0x00004000
+#define BP_ANADIG_PFD_480_PFD1_FRAC      8
+#define BM_ANADIG_PFD_480_PFD1_FRAC 0x00003F00
+#define BF_ANADIG_PFD_480_PFD1_FRAC(v)  \
+	(((v) << 8) & BM_ANADIG_PFD_480_PFD1_FRAC)
+#define BM_ANADIG_PFD_480_PFD0_CLKGATE 0x00000080
+#define BM_ANADIG_PFD_480_PFD0_STABLE 0x00000040
+#define BP_ANADIG_PFD_480_PFD0_FRAC      0
+#define BM_ANADIG_PFD_480_PFD0_FRAC 0x0000003F
+#define BF_ANADIG_PFD_480_PFD0_FRAC(v)  \
+	(((v) << 0) & BM_ANADIG_PFD_480_PFD0_FRAC)
+
+#define BM_ANADIG_PFD_528_PFD3_CLKGATE 0x80000000
+#define BM_ANADIG_PFD_528_PFD3_STABLE 0x40000000
+#define BP_ANADIG_PFD_528_PFD3_FRAC      24
+#define BM_ANADIG_PFD_528_PFD3_FRAC 0x3F000000
+#define BF_ANADIG_PFD_528_PFD3_FRAC(v)  \
+	(((v) << 24) & BM_ANADIG_PFD_528_PFD3_FRAC)
+#define BM_ANADIG_PFD_528_PFD2_CLKGATE 0x00800000
+#define BM_ANADIG_PFD_528_PFD2_STABLE 0x00400000
+#define BP_ANADIG_PFD_528_PFD2_FRAC      16
+#define BM_ANADIG_PFD_528_PFD2_FRAC 0x003F0000
+#define BF_ANADIG_PFD_528_PFD2_FRAC(v)  \
+	(((v) << 16) & BM_ANADIG_PFD_528_PFD2_FRAC)
+#define BM_ANADIG_PFD_528_PFD1_CLKGATE 0x00008000
+#define BM_ANADIG_PFD_528_PFD1_STABLE 0x00004000
+#define BP_ANADIG_PFD_528_PFD1_FRAC      8
+#define BM_ANADIG_PFD_528_PFD1_FRAC 0x00003F00
+#define BF_ANADIG_PFD_528_PFD1_FRAC(v)  \
+	(((v) << 8) & BM_ANADIG_PFD_528_PFD1_FRAC)
+#define BM_ANADIG_PFD_528_PFD0_CLKGATE 0x00000080
+#define BM_ANADIG_PFD_528_PFD0_STABLE 0x00000040
+#define BP_ANADIG_PFD_528_PFD0_FRAC      0
+#define BM_ANADIG_PFD_528_PFD0_FRAC 0x0000003F
+#define BF_ANADIG_PFD_528_PFD0_FRAC(v)  \
+	(((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
+
+#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
+#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ 0x60
+#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ_SHIFT 4
+
+#define BM_PMU_MISC2_AUDIO_DIV_MSB (1 << 23)
+#define BP_PMU_MISC2_AUDIO_DIV_MSB 23
+
+#define BM_PMU_MISC2_AUDIO_DIV_LSB (1 << 15)
+#define BP_PMU_MISC2_AUDIO_DIV_LSB 15
+
+#define PMU_MISC2_AUDIO_DIV(v) \
+	(((v & BM_PMU_MISC2_AUDIO_DIV_MSB) >> \
+	(BP_PMU_MISC2_AUDIO_DIV_MSB - 1)) | \
+	((v & BM_PMU_MISC2_AUDIO_DIV_LSB) >> \
+	 BP_PMU_MISC2_AUDIO_DIV_LSB))
+
+#endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/gpio.h
new file mode 100644
index 000000000..b39131993
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/gpio.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ */
+
+
+#ifndef __ASM_ARCH_MX6_GPIO_H
+#define __ASM_ARCH_MX6_GPIO_H
+
+#include <asm/mach-imx/gpio.h>
+
+#endif	/* __ASM_ARCH_MX6_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/imx-rdc.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/imx-rdc.h
new file mode 100644
index 000000000..ecdd64d67
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/imx-rdc.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __IMX_RDC_H__
+#define __IMX_RDC_H__
+
+#if defined(CONFIG_MX6SX)
+#include "mx6sx_rdc.h"
+#else
+#error "Please select cpu"
+#endif /* CONFIG_MX6SX */
+
+#endif	/* __IMX_RDC_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/imx-regs.h
new file mode 100644
index 000000000..a8a5bf7a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -0,0 +1,972 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __ASM_ARCH_MX6_IMX_REGS_H__
+#define __ASM_ARCH_MX6_IMX_REGS_H__
+
+#define ARCH_MXC
+
+#define ROMCP_ARB_BASE_ADDR             0x00000000
+#define ROMCP_ARB_END_ADDR              0x000FFFFF
+
+#ifdef CONFIG_MX6SL
+#define GPU_2D_ARB_BASE_ADDR            0x02200000
+#define GPU_2D_ARB_END_ADDR             0x02203FFF
+#define OPENVG_ARB_BASE_ADDR            0x02204000
+#define OPENVG_ARB_END_ADDR             0x02207FFF
+#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
+#define CAAM_ARB_BASE_ADDR              0x00100000
+#define CAAM_ARB_END_ADDR               0x00107FFF
+#define GPU_ARB_BASE_ADDR               0x01800000
+#define GPU_ARB_END_ADDR                0x01803FFF
+#define APBH_DMA_ARB_BASE_ADDR          0x01804000
+#define APBH_DMA_ARB_END_ADDR           0x0180BFFF
+#define M4_BOOTROM_BASE_ADDR			0x007F8000
+
+#elif !defined(CONFIG_MX6SLL)
+#define CAAM_ARB_BASE_ADDR              0x00100000
+#define CAAM_ARB_END_ADDR               0x00103FFF
+#define APBH_DMA_ARB_BASE_ADDR          0x00110000
+#define APBH_DMA_ARB_END_ADDR           0x00117FFF
+#define HDMI_ARB_BASE_ADDR              0x00120000
+#define HDMI_ARB_END_ADDR               0x00128FFF
+#define GPU_3D_ARB_BASE_ADDR            0x00130000
+#define GPU_3D_ARB_END_ADDR             0x00133FFF
+#define GPU_2D_ARB_BASE_ADDR            0x00134000
+#define GPU_2D_ARB_END_ADDR             0x00137FFF
+#define DTCP_ARB_BASE_ADDR              0x00138000
+#define DTCP_ARB_END_ADDR               0x0013BFFF
+#endif	/* CONFIG_MX6SL */
+
+#define MXS_APBH_BASE			APBH_DMA_ARB_BASE_ADDR
+#define MXS_GPMI_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x04000)
+
+/* GPV - PL301 configuration ports */
+#if (defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL))
+#define GPV2_BASE_ADDR                  0x00D00000
+#define GPV3_BASE_ADDR			0x00E00000
+#define GPV4_BASE_ADDR			0x00F00000
+#define GPV5_BASE_ADDR			0x01000000
+#define GPV6_BASE_ADDR			0x01100000
+#define PCIE_ARB_BASE_ADDR              0x08000000
+#define PCIE_ARB_END_ADDR               0x08FFFFFF
+
+#else
+#define GPV2_BASE_ADDR			0x00200000
+#define GPV3_BASE_ADDR			0x00300000
+#define GPV4_BASE_ADDR			0x00800000
+#define PCIE_ARB_BASE_ADDR              0x01000000
+#define PCIE_ARB_END_ADDR               0x01FFFFFF
+#endif
+
+#define IRAM_BASE_ADDR			0x00900000
+#define SCU_BASE_ADDR                   0x00A00000
+#define IC_INTERFACES_BASE_ADDR         0x00A00100
+#define GLOBAL_TIMER_BASE_ADDR          0x00A00200
+#define PRIVATE_TIMERS_WD_BASE_ADDR     0x00A00600
+#define IC_DISTRIBUTOR_BASE_ADDR        0x00A01000
+#define L2_PL310_BASE			0x00A02000
+#define GPV0_BASE_ADDR                  0x00B00000
+#define GPV1_BASE_ADDR                  0x00C00000
+
+#define AIPS1_ARB_BASE_ADDR             0x02000000
+#define AIPS1_ARB_END_ADDR              0x020FFFFF
+#define AIPS2_ARB_BASE_ADDR             0x02100000
+#define AIPS2_ARB_END_ADDR              0x021FFFFF
+/* AIPS3 only on i.MX6SX */
+#define AIPS3_ARB_BASE_ADDR             0x02200000
+#define AIPS3_ARB_END_ADDR              0x022FFFFF
+#ifdef CONFIG_MX6SX
+#define WEIM_ARB_BASE_ADDR              0x50000000
+#define WEIM_ARB_END_ADDR               0x57FFFFFF
+#define QSPI0_AMBA_BASE                0x60000000
+#define QSPI0_AMBA_END                 0x6FFFFFFF
+#define QSPI1_AMBA_BASE                0x70000000
+#define QSPI1_AMBA_END                 0x7FFFFFFF
+#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
+#define WEIM_ARB_BASE_ADDR              0x50000000
+#define WEIM_ARB_END_ADDR               0x57FFFFFF
+#define QSPI0_AMBA_BASE                 0x60000000
+#define QSPI0_AMBA_END                  0x6FFFFFFF
+#elif !defined(CONFIG_MX6SLL)
+#define SATA_ARB_BASE_ADDR              0x02200000
+#define SATA_ARB_END_ADDR               0x02203FFF
+#define OPENVG_ARB_BASE_ADDR            0x02204000
+#define OPENVG_ARB_END_ADDR             0x02207FFF
+#define HSI_ARB_BASE_ADDR               0x02208000
+#define HSI_ARB_END_ADDR                0x0220BFFF
+#define IPU1_ARB_BASE_ADDR              0x02400000
+#define IPU1_ARB_END_ADDR               0x027FFFFF
+#define IPU2_ARB_BASE_ADDR              0x02800000
+#define IPU2_ARB_END_ADDR               0x02BFFFFF
+#define WEIM_ARB_BASE_ADDR              0x08000000
+#define WEIM_ARB_END_ADDR               0x0FFFFFFF
+#endif
+
+#if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+	defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
+#define MMDC0_ARB_BASE_ADDR             0x80000000
+#define MMDC0_ARB_END_ADDR              0xFFFFFFFF
+#define MMDC1_ARB_BASE_ADDR             0xC0000000
+#define MMDC1_ARB_END_ADDR              0xFFFFFFFF
+#else
+#define MMDC0_ARB_BASE_ADDR             0x10000000
+#define MMDC0_ARB_END_ADDR              0x7FFFFFFF
+#define MMDC1_ARB_BASE_ADDR             0x80000000
+#define MMDC1_ARB_END_ADDR              0xFFFFFFFF
+#endif
+
+#ifndef CONFIG_MX6SX
+#define IPU_SOC_BASE_ADDR		IPU1_ARB_BASE_ADDR
+#define IPU_SOC_OFFSET			0x00200000
+#endif
+
+/* Defines for Blocks connected via AIPS (SkyBlue) */
+#define ATZ1_BASE_ADDR              AIPS1_ARB_BASE_ADDR
+#define ATZ2_BASE_ADDR              AIPS2_ARB_BASE_ADDR
+#define ATZ3_BASE_ADDR              AIPS3_ARB_BASE_ADDR
+#define AIPS1_BASE_ADDR             AIPS1_ON_BASE_ADDR
+#define AIPS2_BASE_ADDR             AIPS2_ON_BASE_ADDR
+#define AIPS3_BASE_ADDR             AIPS3_ON_BASE_ADDR
+
+#define SPDIF_BASE_ADDR             (ATZ1_BASE_ADDR + 0x04000)
+#define ECSPI1_BASE_ADDR            (ATZ1_BASE_ADDR + 0x08000)
+#define ECSPI2_BASE_ADDR            (ATZ1_BASE_ADDR + 0x0C000)
+#define ECSPI3_BASE_ADDR            (ATZ1_BASE_ADDR + 0x10000)
+#define ECSPI4_BASE_ADDR            (ATZ1_BASE_ADDR + 0x14000)
+
+#define MX6SL_UART5_BASE_ADDR       (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SLL_UART4_BASE_ADDR      (ATZ1_BASE_ADDR + 0x18000)
+#define MX6UL_UART7_BASE_ADDR       (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SL_UART2_BASE_ADDR       (ATZ1_BASE_ADDR + 0x24000)
+#define MX6SLL_UART2_BASE_ADDR      (ATZ1_BASE_ADDR + 0x24000)
+#define MX6UL_UART8_BASE_ADDR       (ATZ1_BASE_ADDR + 0x24000)
+#define MX6SL_UART3_BASE_ADDR       (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SLL_UART3_BASE_ADDR      (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SL_UART4_BASE_ADDR       (ATZ1_BASE_ADDR + 0x38000)
+
+#ifndef CONFIG_MX6SX
+#define ECSPI5_BASE_ADDR            (ATZ1_BASE_ADDR + 0x18000)
+#endif
+#define UART1_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x20000)
+#define UART1_BASE                  (ATZ1_BASE_ADDR + 0x20000)
+#define ESAI1_BASE_ADDR             (ATZ1_BASE_ADDR + 0x24000)
+#define UART8_BASE                  (ATZ1_BASE_ADDR + 0x24000)
+#define SSI1_BASE_ADDR              (ATZ1_BASE_ADDR + 0x28000)
+#define SSI2_BASE_ADDR              (ATZ1_BASE_ADDR + 0x2C000)
+#define SSI3_BASE_ADDR              (ATZ1_BASE_ADDR + 0x30000)
+#define ASRC_BASE_ADDR              (ATZ1_BASE_ADDR + 0x34000)
+
+#ifndef CONFIG_MX6SX
+#define SPBA_BASE_ADDR              (ATZ1_BASE_ADDR + 0x3C000)
+#define VPU_BASE_ADDR               (ATZ1_BASE_ADDR + 0x40000)
+#endif
+#define AIPS1_ON_BASE_ADDR          (ATZ1_BASE_ADDR + 0x7C000)
+
+#define AIPS1_OFF_BASE_ADDR         (ATZ1_BASE_ADDR + 0x80000)
+#define PWM1_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x0000)
+#define PWM2_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x4000)
+#define PWM3_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x8000)
+#define PWM4_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0xC000)
+#define CAN1_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x10000)
+#define CAN2_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x14000)
+/* QOSC on i.MX6SLL */
+#define QOSC_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x14000)
+#define GPT1_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x18000)
+#define GPIO1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x1C000)
+#define GPIO2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x20000)
+#define GPIO3_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x24000)
+#define GPIO4_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x28000)
+#define GPIO5_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x2C000)
+#define MX6UL_SNVS_LP_BASE_ADDR     (AIPS1_OFF_BASE_ADDR + 0x30000)
+#define GPIO6_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x30000)
+#define GPIO7_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x34000)
+#define KPP_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x38000)
+#define WDOG1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x3C000)
+#define WDOG2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x40000)
+#define ANATOP_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x48000)
+#define USB_PHY0_BASE_ADDR          (AIPS1_OFF_BASE_ADDR + 0x49000)
+#define USB_PHY1_BASE_ADDR          (AIPS1_OFF_BASE_ADDR + 0x4a000)
+#define CCM_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x44000)
+#define SNVS_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x4C000)
+#define EPIT1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x50000)
+#define EPIT2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x54000)
+#define SRC_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x58000)
+#define GPC_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x5C000)
+#define IOMUXC_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x60000)
+#define IOMUXC_GPR_BASE_ADDR        (AIPS1_OFF_BASE_ADDR + 0x64000)
+#ifdef CONFIG_MX6SLL
+#define CSI_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_PORT_HOST_BASE_ADDR    (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#define PXP_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x70000)
+#define EPDC_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x74000)
+#define DCP_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x7C000)
+#elif defined(CONFIG_MX6SL)
+#define CSI_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x64000)
+#define SIPIX_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_PORT_HOST_BASE_ADDR    (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#elif defined(CONFIG_MX6SX)
+#define CANFD1_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#define CANFD2_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x70000)
+#define SEMAPHORE1_BASE_ADDR        (AIPS1_OFF_BASE_ADDR + 0x74000)
+#define SEMAPHORE2_BASE_ADDR        (AIPS1_OFF_BASE_ADDR + 0x78000)
+#define RDC_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x7C000)
+#else
+#define DCIC1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x64000)
+#define DCIC2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#endif
+
+#define MX6SL_LCDIF_BASE_ADDR      (AIPS1_OFF_BASE_ADDR + 0x78000)
+#define MX6SLL_LCDIF_BASE_ADDR      (AIPS1_OFF_BASE_ADDR + 0x78000)
+
+#define AIPS2_ON_BASE_ADDR          (ATZ2_BASE_ADDR + 0x7C000)
+#define AIPS2_OFF_BASE_ADDR         (ATZ2_BASE_ADDR + 0x80000)
+#define AIPS3_ON_BASE_ADDR          (ATZ3_BASE_ADDR + 0x7C000)
+#define AIPS3_OFF_BASE_ADDR         (ATZ3_BASE_ADDR + 0x80000)
+#if defined(CONFIG_MX6UL)
+#define CAAM_BASE_ADDR              (ATZ2_BASE_ADDR + 0x40000)
+#else
+#define CAAM_BASE_ADDR              (ATZ2_BASE_ADDR)
+#endif
+#define ARM_BASE_ADDR		    (ATZ2_BASE_ADDR + 0x40000)
+
+#define CONFIG_SYS_FSL_SEC_OFFSET   0
+#define CONFIG_SYS_FSL_SEC_ADDR     (CAAM_BASE_ADDR + \
+				     CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_OFFSET   0x1000
+#define CONFIG_SYS_FSL_JR0_ADDR     (CAAM_BASE_ADDR + \
+				     CONFIG_SYS_FSL_JR0_OFFSET)
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	1
+
+#define USB_PL301_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x0000)
+#define USB_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x4000)
+
+#define ENET_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x8000)
+#ifdef CONFIG_MX6SL
+#define MSHC_IPS_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0xC000)
+#else
+#define MLB_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0xC000)
+#endif
+
+#define USDHC1_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x10000)
+#define USDHC2_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x14000)
+#define USDHC3_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x18000)
+#define USDHC4_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x1C000)
+#define I2C1_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x20000)
+#define I2C2_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x24000)
+#define I2C3_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x28000)
+#define ROMCP_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x2C000)
+#define MMDC_P0_BASE_ADDR           (AIPS2_OFF_BASE_ADDR + 0x30000)
+/* i.MX6SL/SLL */
+#define RNGB_IPS_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0x34000)
+#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
+#define ENET2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x34000)
+#else
+/* i.MX6SX */
+#define ENET2_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x34000)
+#endif
+/* i.MX6DQ/SDL */
+#define MMDC_P1_BASE_ADDR           (AIPS2_OFF_BASE_ADDR + 0x34000)
+
+#define WEIM_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x38000)
+#define OCOTP_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x3C000)
+#define CSU_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x40000)
+#ifdef CONFIG_MX6SLL
+#define IOMUXC_GPR_SNVS_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x44000)
+#define IOMUXC_SNVS_BASE_ADDR        (AIPS2_OFF_BASE_ADDR + 0x48000)
+#endif
+#define IP2APB_PERFMON1_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x44000)
+#define IP2APB_PERFMON2_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x48000)
+#define MX6UL_LCDIF1_BASE_ADDR      (AIPS2_OFF_BASE_ADDR + 0x48000)
+#define MX6ULL_LCDIF1_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x48000)
+#ifdef CONFIG_MX6SX
+#define DEBUG_MONITOR_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x4C000)
+#else
+#define IP2APB_PERFMON3_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x4C000)
+#endif
+#define IP2APB_TZASC1_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x50000)
+#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
+#define SCTR_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x5C000)
+#define QSPI0_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x60000)
+#define UART6_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x7C000)
+#elif defined(CONFIG_MX6SX)
+#define SAI1_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x54000)
+#define AUDMUX_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x58000)
+#define SAI2_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x5C000)
+#define QSPI0_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x60000)
+#define QSPI1_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x64000)
+#else
+#define IP2APB_TZASC2_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x54000)
+#define MIPI_CSI2_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x5C000)
+#define MIPI_DSI_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0x60000)
+#define VDOA_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x64000)
+#endif
+#define MX6UL_WDOG3_BASE_ADDR       (AIPS2_OFF_BASE_ADDR + 0x64000)
+#define UART2_BASE                  (AIPS2_OFF_BASE_ADDR + 0x68000)
+#define UART3_BASE                  (AIPS2_OFF_BASE_ADDR + 0x6C000)
+#define UART4_BASE                  (AIPS2_OFF_BASE_ADDR + 0x70000)
+#define UART5_BASE                  (AIPS2_OFF_BASE_ADDR + 0x74000)
+#define I2C4_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x78000)
+#define IP2APB_USBPHY1_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x78000)
+#define IP2APB_USBPHY2_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x7C000)
+/* i.MX6SLL */
+#define MTR_MASTER_BASE_ADDR        (AIPS2_OFF_BASE_ADDR + 0x7C000)
+
+#ifdef CONFIG_MX6SX
+#define GIS_BASE_ADDR               (AIPS3_ARB_BASE_ADDR + 0x04000)
+#define DCIC1_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0x0C000)
+#define DCIC2_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0x10000)
+#define CSI1_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x14000)
+#define PXP_BASE_ADDR               (AIPS3_ARB_BASE_ADDR + 0x18000)
+#define CSI2_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x1C000)
+#define VADC_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x28000)
+#define VDEC_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x2C000)
+#define SPBA_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x3C000)
+#define AIPS3_CONFIG_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x7C000)
+#define ADC1_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x80000)
+#define ADC2_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x84000)
+#define ECSPI5_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x8C000)
+#define HS_BASE_ADDR                (AIPS3_ARB_BASE_ADDR + 0x90000)
+#define MU_MCU_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x94000)
+#define CANFD_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0x98000)
+#define MU_DSP_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x9C000)
+#define UART6_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0xA0000)
+#define PWM5_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xA4000)
+#define PWM6_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xA8000)
+#define PWM7_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xAC000)
+#define PWM8_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xB0000)
+#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
+#define AIPS3_CONFIG_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x7C000)
+#define DCP_BASE_ADDR               (AIPS3_ARB_BASE_ADDR + 0x80000)
+#define RNGB_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x84000)
+#define UART8_IPS_BASE_ADDR         (AIPS3_ARB_BASE_ADDR + 0x88000)
+#define EPDC_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x8C000)
+#define IOMUXC_SNVS_BASE_ADDR       (AIPS3_ARB_BASE_ADDR + 0x90000)
+#define SNVS_GPR_BASE_ADDR          (AIPS3_ARB_BASE_ADDR + 0x94000)
+#endif
+
+#define NOC_DDR_BASE_ADDR           (GPV0_BASE_ADDR + 0xB0000)
+
+/* Only for i.MX6SX */
+#define LCDIF2_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x24000)
+#define MX6SX_LCDIF1_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x20000)
+#define MX6SX_WDOG3_BASE_ADDR       (AIPS3_ARB_BASE_ADDR + 0x88000)
+
+#if !(defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+	defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL))
+#define IRAM_SIZE                    0x00040000
+#else
+#define IRAM_SIZE                    0x00020000
+#endif
+#define FEC_QUIRK_ENET_MAC
+
+#include <asm/mach-imx/regs-lcdif.h>
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#include <linux/bitops.h>
+
+/* only for i.MX6SX/UL */
+#define WDOG3_BASE_ADDR (((is_mx6ul() || is_mx6ull()) ?	\
+			 MX6UL_WDOG3_BASE_ADDR :  MX6SX_WDOG3_BASE_ADDR))
+#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6SLL)) ?	\
+			  MX6SLL_LCDIF_BASE_ADDR :		\
+			  (is_cpu_type(MXC_CPU_MX6SL)) ?	\
+			  MX6SL_LCDIF_BASE_ADDR :		\
+			  ((is_cpu_type(MXC_CPU_MX6UL)) ?	\
+			  MX6UL_LCDIF1_BASE_ADDR :		\
+			  ((is_mx6ull()) ?	\
+			  MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)))
+
+
+extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
+
+#define SRC_SCR_CORE_1_RESET_OFFSET     14
+#define SRC_SCR_CORE_1_RESET_MASK       (1<<SRC_SCR_CORE_1_RESET_OFFSET)
+#define SRC_SCR_CORE_2_RESET_OFFSET     15
+#define SRC_SCR_CORE_2_RESET_MASK       (1<<SRC_SCR_CORE_2_RESET_OFFSET)
+#define SRC_SCR_CORE_3_RESET_OFFSET     16
+#define SRC_SCR_CORE_3_RESET_MASK       (1<<SRC_SCR_CORE_3_RESET_OFFSET)
+#define SRC_SCR_CORE_1_ENABLE_OFFSET    22
+#define SRC_SCR_CORE_1_ENABLE_MASK      (1<<SRC_SCR_CORE_1_ENABLE_OFFSET)
+#define SRC_SCR_CORE_2_ENABLE_OFFSET    23
+#define SRC_SCR_CORE_2_ENABLE_MASK      (1<<SRC_SCR_CORE_2_ENABLE_OFFSET)
+#define SRC_SCR_CORE_3_ENABLE_OFFSET    24
+#define SRC_SCR_CORE_3_ENABLE_MASK      (1<<SRC_SCR_CORE_3_ENABLE_OFFSET)
+
+struct rdc_regs {
+	u32	vir;		/* Version information */
+	u32	reserved1[8];
+	u32	stat;		/* Status */
+	u32	intctrl;	/* Interrupt and Control */
+	u32	intstat;	/* Interrupt Status */
+	u32	reserved2[116];
+	u32	mda[32];	/* Master Domain Assignment */
+	u32	reserved3[96];
+	u32	pdap[104];	/* Peripheral Domain Access Permissions */
+	u32	reserved4[88];
+	struct {
+		u32 mrsa;	/* Memory Region Start Address */
+		u32 mrea;	/* Memory Region End Address */
+		u32 mrc;	/* Memory Region Control */
+		u32 mrvs;	/* Memory Region Violation Status */
+	} mem_region[55];
+};
+
+struct rdc_sema_regs {
+	u8	gate[64];	/* Gate */
+	u16	rstgt;		/* Reset Gate */
+};
+
+/* WEIM registers */
+struct weim {
+	u32 cs0gcr1;
+	u32 cs0gcr2;
+	u32 cs0rcr1;
+	u32 cs0rcr2;
+	u32 cs0wcr1;
+	u32 cs0wcr2;
+
+	u32 cs1gcr1;
+	u32 cs1gcr2;
+	u32 cs1rcr1;
+	u32 cs1rcr2;
+	u32 cs1wcr1;
+	u32 cs1wcr2;
+
+	u32 cs2gcr1;
+	u32 cs2gcr2;
+	u32 cs2rcr1;
+	u32 cs2rcr2;
+	u32 cs2wcr1;
+	u32 cs2wcr2;
+
+	u32 cs3gcr1;
+	u32 cs3gcr2;
+	u32 cs3rcr1;
+	u32 cs3rcr2;
+	u32 cs3wcr1;
+	u32 cs3wcr2;
+
+	u32 unused[12];
+
+	u32 wcr;
+	u32 wiar;
+	u32 ear;
+};
+
+/* System Reset Controller (SRC) */
+struct src {
+	u32	scr;
+	u32	sbmr1;
+	u32	srsr;
+	u32	reserved1[2];
+	u32	sisr;
+	u32	simr;
+	u32     sbmr2;
+	u32     gpr1;
+	u32     gpr2;
+	u32     gpr3;
+	u32     gpr4;
+	u32     gpr5;
+	u32     gpr6;
+	u32     gpr7;
+	u32     gpr8;
+	u32     gpr9;
+	u32     gpr10;
+};
+
+#define src_base ((struct src *)SRC_BASE_ADDR)
+
+#define SRC_M4_REG_OFFSET		0
+#define SRC_M4_ENABLE_OFFSET		22
+#define SRC_M4_ENABLE_MASK		BIT(22)
+#define SRC_M4C_NON_SCLR_RST_OFFSET	4
+#define SRC_M4C_NON_SCLR_RST_MASK	BIT(4)
+
+/* GPR1 bitfields */
+#define IOMUXC_GPR1_APP_CLK_REQ_N		BIT(30)
+#define IOMUXC_GPR1_PCIE_EXIT_L1		BIT(28)
+#define IOMUXC_GPR1_PCIE_RDY_L23		BIT(27)
+#define IOMUXC_GPR1_PCIE_ENTER_L1		BIT(26)
+#define IOMUXC_GPR1_MIPI_COLOR_SW		BIT(25)
+#define IOMUXC_GPR1_DPI_OFF			BIT(24)
+#define IOMUXC_GPR1_EXC_MON_SLVE		BIT(22)
+#define IOMUXC_GPR1_ENET_CLK_SEL_OFFSET		21
+#define IOMUXC_GPR1_ENET_CLK_SEL_MASK		(1 << IOMUXC_GPR1_ENET_CLK_SEL_OFFSET)
+#define IOMUXC_GPR1_MIPI_IPU2_MUX_IOMUX		BIT(20)
+#define IOMUXC_GPR1_MIPI_IPU1_MUX_IOMUX		BIT(19)
+#define IOMUXC_GPR1_PCIE_TEST_PD			BIT(18)
+#define IOMUXC_GPR1_IPU_VPU_MUX_IPU2		BIT(17)
+#define IOMUXC_GPR1_PCIE_REF_CLK_EN		BIT(16)
+#define IOMUXC_GPR1_USB_EXP_MODE			BIT(15)
+#define IOMUXC_GPR1_PCIE_INT			BIT(14)
+#define IOMUXC_GPR1_USB_OTG_ID_OFFSET		13
+#define IOMUXC_GPR1_USB_OTG_ID_SEL_MASK		(1 << IOMUXC_GPR1_USB_OTG_ID_OFFSET)
+#define IOMUXC_GPR1_GINT				BIT(12)
+#define IOMUXC_GPR1_ADDRS3_MASK			(0x3 << 10)
+#define IOMUXC_GPR1_ADDRS3_32MB			(0x0 << 10)
+#define IOMUXC_GPR1_ADDRS3_64MB			(0x1 << 10)
+#define IOMUXC_GPR1_ADDRS3_128MB			(0x2 << 10)
+#define IOMUXC_GPR1_ACT_CS3			BIT(9)
+#define IOMUXC_GPR1_ADDRS2_MASK			(0x3 << 7)
+#define IOMUXC_GPR1_ACT_CS2			BIT(6)
+#define IOMUXC_GPR1_ADDRS1_MASK			(0x3 << 4)
+#define IOMUXC_GPR1_ACT_CS1			BIT(3)
+#define IOMUXC_GPR1_ADDRS0_OFFSET		(1)
+#define IOMUXC_GPR1_ADDRS0_MASK			(0x3 << 1)
+#define IOMUXC_GPR1_ACT_CS0			BIT(0)
+
+/* GPR3 bitfields */
+#define IOMUXC_GPR3_GPU_DBG_OFFSET		29
+#define IOMUXC_GPR3_GPU_DBG_MASK		(3<<IOMUXC_GPR3_GPU_DBG_OFFSET)
+#define IOMUXC_GPR3_BCH_WR_CACHE_CTL_OFFSET	28
+#define IOMUXC_GPR3_BCH_WR_CACHE_CTL_MASK	(1<<IOMUXC_GPR3_BCH_WR_CACHE_CTL_OFFSET)
+#define IOMUXC_GPR3_BCH_RD_CACHE_CTL_OFFSET	27
+#define IOMUXC_GPR3_BCH_RD_CACHE_CTL_MASK	(1<<IOMUXC_GPR3_BCH_RD_CACHE_CTL_OFFSET)
+#define IOMUXC_GPR3_uSDHCx_WR_CACHE_CTL_OFFSET	26
+#define IOMUXC_GPR3_uSDHCx_WR_CACHE_CTL_MASK	(1<<IOMUXC_GPR3_uSDHCx_WR_CACHE_CTL_OFFSET)
+#define IOMUXC_GPR3_uSDHCx_RD_CACHE_CTL_OFFSET	25
+#define IOMUXC_GPR3_uSDHCx_RD_CACHE_CTL_MASK	(1<<IOMUXC_GPR3_uSDHCx_RD_CACHE_CTL_OFFSET)
+#define IOMUXC_GPR3_OCRAM_CTL_OFFSET		21
+#define IOMUXC_GPR3_OCRAM_CTL_MASK		(0xf<<IOMUXC_GPR3_OCRAM_CTL_OFFSET)
+#define IOMUXC_GPR3_OCRAM_STATUS_OFFSET		17
+#define IOMUXC_GPR3_OCRAM_STATUS_MASK		(0xf<<IOMUXC_GPR3_OCRAM_STATUS_OFFSET)
+#define IOMUXC_GPR3_CORE3_DBG_ACK_EN_OFFSET	16
+#define IOMUXC_GPR3_CORE3_DBG_ACK_EN_MASK	(1<<IOMUXC_GPR3_CORE3_DBG_ACK_EN_OFFSET)
+#define IOMUXC_GPR3_CORE2_DBG_ACK_EN_OFFSET	15
+#define IOMUXC_GPR3_CORE2_DBG_ACK_EN_MASK	(1<<IOMUXC_GPR3_CORE2_DBG_ACK_EN_OFFSET)
+#define IOMUXC_GPR3_CORE1_DBG_ACK_EN_OFFSET	14
+#define IOMUXC_GPR3_CORE1_DBG_ACK_EN_MASK	(1<<IOMUXC_GPR3_CORE1_DBG_ACK_EN_OFFSET)
+#define IOMUXC_GPR3_CORE0_DBG_ACK_EN_OFFSET	13
+#define IOMUXC_GPR3_CORE0_DBG_ACK_EN_MASK	(1<<IOMUXC_GPR3_CORE0_DBG_ACK_EN_OFFSET)
+#define IOMUXC_GPR3_TZASC2_BOOT_LOCK_OFFSET	12
+#define IOMUXC_GPR3_TZASC2_BOOT_LOCK_MASK	(1<<IOMUXC_GPR3_TZASC2_BOOT_LOCK_OFFSET)
+#define IOMUXC_GPR3_TZASC1_BOOT_LOCK_OFFSET	11
+#define IOMUXC_GPR3_TZASC1_BOOT_LOCK_MASK	(1<<IOMUXC_GPR3_TZASC1_BOOT_LOCK_OFFSET)
+#define IOMUXC_GPR3_IPU_DIAG_OFFSET		10
+#define IOMUXC_GPR3_IPU_DIAG_MASK		(1<<IOMUXC_GPR3_IPU_DIAG_OFFSET)
+
+#define IOMUXC_GPR3_MUX_SRC_IPU1_DI0	0
+#define IOMUXC_GPR3_MUX_SRC_IPU1_DI1	1
+#define IOMUXC_GPR3_MUX_SRC_IPU2_DI0	2
+#define IOMUXC_GPR3_MUX_SRC_IPU2_DI1	3
+
+#define IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET	8
+#define IOMUXC_GPR3_LVDS1_MUX_CTL_MASK		(3<<IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET)
+
+#define IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET	6
+#define IOMUXC_GPR3_LVDS0_MUX_CTL_MASK		(3<<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET)
+
+#define IOMUXC_GPR3_MIPI_MUX_CTL_OFFSET		4
+#define IOMUXC_GPR3_MIPI_MUX_CTL_MASK		(3<<IOMUXC_GPR3_MIPI_MUX_CTL_OFFSET)
+
+#define IOMUXC_GPR3_HDMI_MUX_CTL_OFFSET		2
+#define IOMUXC_GPR3_HDMI_MUX_CTL_MASK		(3<<IOMUXC_GPR3_HDMI_MUX_CTL_OFFSET)
+
+/* gpr12 bitfields */
+#define IOMUXC_GPR12_ARMP_IPG_CLK_EN		BIT(27)
+#define IOMUXC_GPR12_ARMP_AHB_CLK_EN		BIT(26)
+#define IOMUXC_GPR12_ARMP_ATB_CLK_EN		BIT(25)
+#define IOMUXC_GPR12_ARMP_APB_CLK_EN		BIT(24)
+#define IOMUXC_GPR12_DEVICE_TYPE		(0xf << 12)
+#define IOMUXC_GPR12_PCIE_CTL_2			BIT(10)
+#define IOMUXC_GPR12_LOS_LEVEL			(0x1f << 4)
+
+struct iomuxc {
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
+	u8 reserved[0x4000];
+#endif
+	u32 gpr[14];
+};
+
+struct gpc {
+	u32	cntr;
+	u32	pgr;
+	u32	imr1;
+	u32	imr2;
+	u32	imr3;
+	u32	imr4;
+	u32	isr1;
+	u32	isr2;
+	u32	isr3;
+	u32	isr4;
+};
+
+#define IOMUXC_GPR2_COUNTER_RESET_VAL_OFFSET		20
+#define IOMUXC_GPR2_COUNTER_RESET_VAL_MASK		(3<<IOMUXC_GPR2_COUNTER_RESET_VAL_OFFSET)
+#define IOMUXC_GPR2_LVDS_CLK_SHIFT_OFFSET		16
+#define IOMUXC_GPR2_LVDS_CLK_SHIFT_MASK			(7<<IOMUXC_GPR2_LVDS_CLK_SHIFT_OFFSET)
+
+#define IOMUXC_GPR2_BGREF_RRMODE_OFFSET			15
+#define IOMUXC_GPR2_BGREF_RRMODE_MASK			(1<<IOMUXC_GPR2_BGREF_RRMODE_OFFSET)
+#define IOMUXC_GPR2_BGREF_RRMODE_INTERNAL_RES		(1<<IOMUXC_GPR2_BGREF_RRMODE_OFFSET)
+#define IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES		(0<<IOMUXC_GPR2_BGREF_RRMODE_OFFSET)
+#define IOMUXC_GPR2_VSYNC_ACTIVE_HIGH	0
+#define IOMUXC_GPR2_VSYNC_ACTIVE_LOW	1
+
+#define IOMUXC_GPR2_DI1_VS_POLARITY_OFFSET		10
+#define IOMUXC_GPR2_DI1_VS_POLARITY_MASK		(1<<IOMUXC_GPR2_DI1_VS_POLARITY_OFFSET)
+#define IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH		(IOMUXC_GPR2_VSYNC_ACTIVE_HIGH<<IOMUXC_GPR2_DI1_VS_POLARITY_OFFSET)
+#define IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW		(IOMUXC_GPR2_VSYNC_ACTIVE_LOW<<IOMUXC_GPR2_DI1_VS_POLARITY_OFFSET)
+
+#define IOMUXC_GPR2_DI0_VS_POLARITY_OFFSET		9
+#define IOMUXC_GPR2_DI0_VS_POLARITY_MASK		(1<<IOMUXC_GPR2_DI0_VS_POLARITY_OFFSET)
+#define IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH		(IOMUXC_GPR2_VSYNC_ACTIVE_HIGH<<IOMUXC_GPR2_DI0_VS_POLARITY_OFFSET)
+#define IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW		(IOMUXC_GPR2_VSYNC_ACTIVE_LOW<<IOMUXC_GPR2_DI0_VS_POLARITY_OFFSET)
+
+#define IOMUXC_GPR2_BITMAP_SPWG	0
+#define IOMUXC_GPR2_BITMAP_JEIDA	1
+
+#define IOMUXC_GPR2_BIT_MAPPING_CH1_OFFSET		8
+#define IOMUXC_GPR2_BIT_MAPPING_CH1_MASK		(1<<IOMUXC_GPR2_BIT_MAPPING_CH1_OFFSET)
+#define IOMUXC_GPR2_BIT_MAPPING_CH1_JEIDA		(IOMUXC_GPR2_BITMAP_JEIDA<<IOMUXC_GPR2_BIT_MAPPING_CH1_OFFSET)
+#define IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG		(IOMUXC_GPR2_BITMAP_SPWG<<IOMUXC_GPR2_BIT_MAPPING_CH1_OFFSET)
+
+#define IOMUXC_GPR2_DATA_WIDTH_18	0
+#define IOMUXC_GPR2_DATA_WIDTH_24	1
+
+#define IOMUXC_GPR2_DATA_WIDTH_CH1_OFFSET		7
+#define IOMUXC_GPR2_DATA_WIDTH_CH1_MASK			(1<<IOMUXC_GPR2_DATA_WIDTH_CH1_OFFSET)
+#define IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT		(IOMUXC_GPR2_DATA_WIDTH_18<<IOMUXC_GPR2_DATA_WIDTH_CH1_OFFSET)
+#define IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT		(IOMUXC_GPR2_DATA_WIDTH_24<<IOMUXC_GPR2_DATA_WIDTH_CH1_OFFSET)
+
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET		6
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_MASK		(1<<IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA		(IOMUXC_GPR2_BITMAP_JEIDA<<IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG		(IOMUXC_GPR2_BITMAP_SPWG<<IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET		5
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_MASK			(1<<IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT		(IOMUXC_GPR2_DATA_WIDTH_18<<IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT		(IOMUXC_GPR2_DATA_WIDTH_24<<IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+
+#define IOMUXC_GPR2_SPLIT_MODE_EN_OFFSET		4
+#define IOMUXC_GPR2_SPLIT_MODE_EN_MASK			(1<<IOMUXC_GPR2_SPLIT_MODE_EN_OFFSET)
+
+#define IOMUXC_GPR2_MODE_DISABLED	0
+#define IOMUXC_GPR2_MODE_ENABLED_DI0	1
+#define IOMUXC_GPR2_MODE_ENABLED_DI1	3
+
+#define IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET		2
+#define IOMUXC_GPR2_LVDS_CH1_MODE_MASK			(3<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED		(IOMUXC_GPR2_MODE_DISABLED<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0		(IOMUXC_GPR2_MODE_ENABLED_DI0<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI1		(IOMUXC_GPR2_MODE_ENABLED_DI1<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
+
+#define IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET		0
+#define IOMUXC_GPR2_LVDS_CH0_MODE_MASK			(3<<IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED		(IOMUXC_GPR2_MODE_DISABLED<<IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0		(IOMUXC_GPR2_MODE_ENABLED_DI0<<IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI1		(IOMUXC_GPR2_MODE_ENABLED_DI1<<IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+
+/*
+ * CSPI register definitions
+ */
+#define SPI_MAX_NUM	4
+#if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+	defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+#define MXC_SPI_BASE_ADDRESSES \
+	ECSPI1_BASE_ADDR, \
+	ECSPI2_BASE_ADDR, \
+	ECSPI3_BASE_ADDR, \
+	ECSPI4_BASE_ADDR
+#else
+#define MXC_SPI_BASE_ADDRESSES \
+	ECSPI1_BASE_ADDR, \
+	ECSPI2_BASE_ADDR, \
+	ECSPI3_BASE_ADDR, \
+	ECSPI4_BASE_ADDR, \
+	ECSPI5_BASE_ADDR
+#endif
+
+struct ocotp_regs {
+	u32	ctrl;
+	u32	ctrl_set;
+	u32     ctrl_clr;
+	u32	ctrl_tog;
+	u32	timing;
+	u32     rsvd0[3];
+	u32     data;
+	u32     rsvd1[3];
+	u32     read_ctrl;
+	u32     rsvd2[3];
+	u32	read_fuse_data;
+	u32     rsvd3[3];
+	u32	sw_sticky;
+	u32     rsvd4[3];
+	u32     scs;
+	u32     scs_set;
+	u32     scs_clr;
+	u32     scs_tog;
+	u32     crc_addr;
+	u32     rsvd5[3];
+	u32     crc_value;
+	u32     rsvd6[3];
+	u32     version;
+	u32     rsvd7[0xdb];
+
+	/* fuse banks */
+	struct fuse_bank {
+		u32	fuse_regs[0x20];
+	} bank[0];
+};
+
+struct fuse_bank0_regs {
+	u32	lock;
+	u32	rsvd0[3];
+	u32	uid_low;
+	u32	rsvd1[3];
+	u32	uid_high;
+	u32	rsvd2[3];
+	u32	cfg2;
+	u32	rsvd3[3];
+	u32	cfg3;
+	u32	rsvd4[3];
+	u32	cfg4;
+	u32	rsvd5[3];
+	u32	cfg5;
+	u32	rsvd6[3];
+	u32	cfg6;
+	u32	rsvd7[3];
+};
+
+struct fuse_bank1_regs {
+	u32	mem0;
+	u32	rsvd0[3];
+	u32	mem1;
+	u32	rsvd1[3];
+	u32	mem2;
+	u32	rsvd2[3];
+	u32	mem3;
+	u32	rsvd3[3];
+	u32	mem4;
+	u32	rsvd4[3];
+	u32	ana0;
+	u32	rsvd5[3];
+	u32	ana1;
+	u32	rsvd6[3];
+	u32	ana2;
+	u32	rsvd7[3];
+};
+
+struct fuse_bank4_regs {
+	u32 sjc_resp_low;
+	u32 rsvd0[3];
+	u32 sjc_resp_high;
+	u32 rsvd1[3];
+	u32 mac_addr0;
+	u32 rsvd2[3];
+	u32 mac_addr1;
+	u32 rsvd3[3];
+	u32 mac_addr2; /*For i.MX6SX and i.MX6UL*/
+	u32 rsvd4[7];
+	u32 gp1;
+	u32 rsvd5[3];
+	u32 gp2;
+	u32 rsvd6[3];
+};
+
+struct aipstz_regs {
+	u32	mprot0;
+	u32	mprot1;
+	u32	rsvd[0xe];
+	u32	opacr0;
+	u32	opacr1;
+	u32	opacr2;
+	u32	opacr3;
+	u32	opacr4;
+};
+
+struct anatop_regs {
+	u32	pll_sys;		/* 0x000 */
+	u32	pll_sys_set;		/* 0x004 */
+	u32	pll_sys_clr;		/* 0x008 */
+	u32	pll_sys_tog;		/* 0x00c */
+	u32	usb1_pll_480_ctrl;	/* 0x010 */
+	u32	usb1_pll_480_ctrl_set;	/* 0x014 */
+	u32	usb1_pll_480_ctrl_clr;	/* 0x018 */
+	u32	usb1_pll_480_ctrl_tog;	/* 0x01c */
+	u32	usb2_pll_480_ctrl;	/* 0x020 */
+	u32	usb2_pll_480_ctrl_set;	/* 0x024 */
+	u32	usb2_pll_480_ctrl_clr;	/* 0x028 */
+	u32	usb2_pll_480_ctrl_tog;	/* 0x02c */
+	u32	pll_528;		/* 0x030 */
+	u32	pll_528_set;		/* 0x034 */
+	u32	pll_528_clr;		/* 0x038 */
+	u32	pll_528_tog;		/* 0x03c */
+	u32	pll_528_ss;		/* 0x040 */
+	u32	rsvd0[3];
+	u32	pll_528_num;		/* 0x050 */
+	u32	rsvd1[3];
+	u32	pll_528_denom;		/* 0x060 */
+	u32	rsvd2[3];
+	u32	pll_audio;		/* 0x070 */
+	u32	pll_audio_set;		/* 0x074 */
+	u32	pll_audio_clr;		/* 0x078 */
+	u32	pll_audio_tog;		/* 0x07c */
+	u32	pll_audio_num;		/* 0x080 */
+	u32	rsvd3[3];
+	u32	pll_audio_denom;	/* 0x090 */
+	u32	rsvd4[3];
+	u32	pll_video;		/* 0x0a0 */
+	u32	pll_video_set;		/* 0x0a4 */
+	u32	pll_video_clr;		/* 0x0a8 */
+	u32	pll_video_tog;		/* 0x0ac */
+	u32	pll_video_num;		/* 0x0b0 */
+	u32	rsvd5[3];
+	u32	pll_video_denom;	/* 0x0c0 */
+	u32	rsvd6[3];
+	u32	pll_mlb;		/* 0x0d0 */
+	u32	pll_mlb_set;		/* 0x0d4 */
+	u32	pll_mlb_clr;		/* 0x0d8 */
+	u32	pll_mlb_tog;		/* 0x0dc */
+	u32	pll_enet;		/* 0x0e0 */
+	u32	pll_enet_set;		/* 0x0e4 */
+	u32	pll_enet_clr;		/* 0x0e8 */
+	u32	pll_enet_tog;		/* 0x0ec */
+	u32	pfd_480;		/* 0x0f0 */
+	u32	pfd_480_set;		/* 0x0f4 */
+	u32	pfd_480_clr;		/* 0x0f8 */
+	u32	pfd_480_tog;		/* 0x0fc */
+	u32	pfd_528;		/* 0x100 */
+	u32	pfd_528_set;		/* 0x104 */
+	u32	pfd_528_clr;		/* 0x108 */
+	u32	pfd_528_tog;		/* 0x10c */
+	u32	reg_1p1;		/* 0x110 */
+	u32	reg_1p1_set;		/* 0x114 */
+	u32	reg_1p1_clr;		/* 0x118 */
+	u32	reg_1p1_tog;		/* 0x11c */
+	u32	reg_3p0;		/* 0x120 */
+	u32	reg_3p0_set;		/* 0x124 */
+	u32	reg_3p0_clr;		/* 0x128 */
+	u32	reg_3p0_tog;		/* 0x12c */
+	u32	reg_2p5;		/* 0x130 */
+	u32	reg_2p5_set;		/* 0x134 */
+	u32	reg_2p5_clr;		/* 0x138 */
+	u32	reg_2p5_tog;		/* 0x13c */
+	u32	reg_core;		/* 0x140 */
+	u32	reg_core_set;		/* 0x144 */
+	u32	reg_core_clr;		/* 0x148 */
+	u32	reg_core_tog;		/* 0x14c */
+	u32	ana_misc0;		/* 0x150 */
+	u32	ana_misc0_set;		/* 0x154 */
+	u32	ana_misc0_clr;		/* 0x158 */
+	u32	ana_misc0_tog;		/* 0x15c */
+	u32	ana_misc1;		/* 0x160 */
+	u32	ana_misc1_set;		/* 0x164 */
+	u32	ana_misc1_clr;		/* 0x168 */
+	u32	ana_misc1_tog;		/* 0x16c */
+	u32	ana_misc2;		/* 0x170 */
+	u32	ana_misc2_set;		/* 0x174 */
+	u32	ana_misc2_clr;		/* 0x178 */
+	u32	ana_misc2_tog;		/* 0x17c */
+	u32	tempsense0;		/* 0x180 */
+	u32	tempsense0_set;		/* 0x184 */
+	u32	tempsense0_clr;		/* 0x188 */
+	u32	tempsense0_tog;		/* 0x18c */
+	u32	tempsense1;		/* 0x190 */
+	u32	tempsense1_set;		/* 0x194 */
+	u32	tempsense1_clr;		/* 0x198 */
+	u32	tempsense1_tog;		/* 0x19c */
+	u32	usb1_vbus_detect;	/* 0x1a0 */
+	u32	usb1_vbus_detect_set;	/* 0x1a4 */
+	u32	usb1_vbus_detect_clr;	/* 0x1a8 */
+	u32	usb1_vbus_detect_tog;	/* 0x1ac */
+	u32	usb1_chrg_detect;	/* 0x1b0 */
+	u32	usb1_chrg_detect_set;	/* 0x1b4 */
+	u32	usb1_chrg_detect_clr;	/* 0x1b8 */
+	u32	usb1_chrg_detect_tog;	/* 0x1bc */
+	u32	usb1_vbus_det_stat;	/* 0x1c0 */
+	u32	usb1_vbus_det_stat_set;	/* 0x1c4 */
+	u32	usb1_vbus_det_stat_clr;	/* 0x1c8 */
+	u32	usb1_vbus_det_stat_tog;	/* 0x1cc */
+	u32	usb1_chrg_det_stat;	/* 0x1d0 */
+	u32	usb1_chrg_det_stat_set;	/* 0x1d4 */
+	u32	usb1_chrg_det_stat_clr;	/* 0x1d8 */
+	u32	usb1_chrg_det_stat_tog;	/* 0x1dc */
+	u32	usb1_loopback;		/* 0x1e0 */
+	u32	usb1_loopback_set;	/* 0x1e4 */
+	u32	usb1_loopback_clr;	/* 0x1e8 */
+	u32	usb1_loopback_tog;	/* 0x1ec */
+	u32	usb1_misc;		/* 0x1f0 */
+	u32	usb1_misc_set;		/* 0x1f4 */
+	u32	usb1_misc_clr;		/* 0x1f8 */
+	u32	usb1_misc_tog;		/* 0x1fc */
+	u32	usb2_vbus_detect;	/* 0x200 */
+	u32	usb2_vbus_detect_set;	/* 0x204 */
+	u32	usb2_vbus_detect_clr;	/* 0x208 */
+	u32	usb2_vbus_detect_tog;	/* 0x20c */
+	u32	usb2_chrg_detect;	/* 0x210 */
+	u32	usb2_chrg_detect_set;	/* 0x214 */
+	u32	usb2_chrg_detect_clr;	/* 0x218 */
+	u32	usb2_chrg_detect_tog;	/* 0x21c */
+	u32	usb2_vbus_det_stat;	/* 0x220 */
+	u32	usb2_vbus_det_stat_set;	/* 0x224 */
+	u32	usb2_vbus_det_stat_clr;	/* 0x228 */
+	u32	usb2_vbus_det_stat_tog;	/* 0x22c */
+	u32	usb2_chrg_det_stat;	/* 0x230 */
+	u32	usb2_chrg_det_stat_set;	/* 0x234 */
+	u32	usb2_chrg_det_stat_clr;	/* 0x238 */
+	u32	usb2_chrg_det_stat_tog;	/* 0x23c */
+	u32	usb2_loopback;		/* 0x240 */
+	u32	usb2_loopback_set;	/* 0x244 */
+	u32	usb2_loopback_clr;	/* 0x248 */
+	u32	usb2_loopback_tog;	/* 0x24c */
+	u32	usb2_misc;		/* 0x250 */
+	u32	usb2_misc_set;		/* 0x254 */
+	u32	usb2_misc_clr;		/* 0x258 */
+	u32	usb2_misc_tog;		/* 0x25c */
+	u32	digprog;		/* 0x260 */
+	u32	reserved1[7];
+	u32	digprog_sololite;	/* 0x280 */
+};
+
+#define ANATOP_PFD_FRAC_SHIFT(n)	((n)*8)
+#define ANATOP_PFD_FRAC_MASK(n)	(0x3f<<ANATOP_PFD_FRAC_SHIFT(n))
+#define ANATOP_PFD_STABLE_SHIFT(n)	(6+((n)*8))
+#define ANATOP_PFD_STABLE_MASK(n)	(1<<ANATOP_PFD_STABLE_SHIFT(n))
+#define ANATOP_PFD_CLKGATE_SHIFT(n)	(7+((n)*8))
+#define ANATOP_PFD_CLKGATE_MASK(n)	(1<<ANATOP_PFD_CLKGATE_SHIFT(n))
+
+struct wdog_regs {
+	u16	wcr;	/* Control */
+	u16	wsr;	/* Service */
+	u16	wrsr;	/* Reset Status */
+	u16	wicr;	/* Interrupt Control */
+	u16	wmcr;	/* Miscellaneous Control */
+};
+
+#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)
+#define PWMCR_DOZEEN		(1 << 24)
+#define PWMCR_WAITEN		(1 << 23)
+#define PWMCR_DBGEN		(1 << 22)
+#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
+#define PWMCR_CLKSRC_IPG	(1 << 16)
+#define PWMCR_EN		(1 << 0)
+
+struct pwm_regs {
+	u32	cr;
+	u32	sr;
+	u32	ir;
+	u32	sar;
+	u32	pr;
+	u32	cnr;
+};
+
+/*
+ * If ROM fail back to USB recover mode, USBPH0_PWD will be clear to use USB
+ * If boot from the other mode, USB0_PWD will keep reset value
+ */
+#define	is_boot_from_usb(void) (!(readl(USB_PHY0_BASE_ADDR) & (1<<20)))
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/iomux.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/iomux.h
new file mode 100644
index 000000000..bea0bbb02
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/iomux.h
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __ASM_ARCH_IOMUX_H__
+#define __ASM_ARCH_IOMUX_H__
+
+#define MX6_IOMUXC_GPR4		0x020e0010
+#define MX6_IOMUXC_GPR6		0x020e0018
+#define MX6_IOMUXC_GPR7		0x020e001c
+
+/*
+ * IOMUXC_GPR1 bit fields
+ */
+#define IOMUXC_GPR1_OTG_ID_ENET_RX_ERR	(0<<13)
+#define IOMUXC_GPR1_OTG_ID_GPIO1	(1<<13)
+#define IOMUXC_GPR1_OTG_ID_MASK		(1<<13)
+#define IOMUXC_GPR1_REF_SSP_EN			(1 << 16)
+#define IOMUXC_GPR1_TEST_POWERDOWN		(1 << 18)
+
+#define IOMUXC_GPR1_PCIE_SW_RST		(1 << 29)
+
+/*
+ * IOMUXC_GPR5 bit fields
+ */
+#define IOMUXC_GPR5_PCIE_BTNRST			(1 << 19)
+#define IOMUXC_GPR5_PCIE_PERST			(1 << 18)
+
+/*
+ * IOMUXC_GPR8 bit fields
+ */
+#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_MASK		(0x3f << 0)
+#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET		0
+#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_MASK	(0x3f << 6)
+#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET	6
+#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_MASK		(0x3f << 12)
+#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET	12
+#define IOMUXC_GPR8_PCS_TX_SWING_FULL_MASK		(0x7f << 18)
+#define IOMUXC_GPR8_PCS_TX_SWING_FULL_OFFSET		18
+#define IOMUXC_GPR8_PCS_TX_SWING_LOW_MASK		(0x7f << 25)
+#define IOMUXC_GPR8_PCS_TX_SWING_LOW_OFFSET		25
+
+/*
+ * IOMUXC_GPR12 bit fields
+ */
+#define IOMUXC_GPR12_RX_EQ_2			(0x2 << 0)
+#define IOMUXC_GPR12_RX_EQ_MASK			(0x7 << 0)
+#define IOMUXC_GPR12_LOS_LEVEL_9		(0x9 << 4)
+#define IOMUXC_GPR12_LOS_LEVEL_MASK		(0x1f << 4)
+#define IOMUXC_GPR12_APPS_LTSSM_ENABLE		(1 << 10)
+#define IOMUXC_GPR12_DEVICE_TYPE_EP		(0x0 << 12)
+#define IOMUXC_GPR12_DEVICE_TYPE_RC		(0x4 << 12)
+#define IOMUXC_GPR12_DEVICE_TYPE_MASK		(0xf << 12)
+#define IOMUXC_GPR12_TEST_POWERDOWN		(1 << 30)
+
+/*
+ * IOMUXC_GPR13 bit fields
+ */
+#define IOMUXC_GPR13_SDMA_STOP_REQ	(1<<30)
+#define IOMUXC_GPR13_CAN2_STOP_REQ	(1<<29)
+#define IOMUXC_GPR13_CAN1_STOP_REQ	(1<<28)
+#define IOMUXC_GPR13_ENET_STOP_REQ	(1<<27)
+#define IOMUXC_GPR13_SATA_PHY_8_MASK	(7<<24)
+#define IOMUXC_GPR13_SATA_PHY_7_MASK	(0x1f<<19)
+#define IOMUXC_GPR13_SATA_PHY_6_SHIFT	16
+#define IOMUXC_GPR13_SATA_PHY_6_MASK	(7<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
+#define IOMUXC_GPR13_SATA_SPEED_MASK	(1<<15)
+#define IOMUXC_GPR13_SATA_PHY_5_MASK	(1<<14)
+#define IOMUXC_GPR13_SATA_PHY_4_MASK	(7<<11)
+#define IOMUXC_GPR13_SATA_PHY_3_MASK	(0x1f<<7)
+#define IOMUXC_GPR13_SATA_PHY_2_MASK	(0x1f<<2)
+#define IOMUXC_GPR13_SATA_PHY_1_MASK	(3<<0)
+
+#define IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17)
+#define IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14)
+#define IOMUX_GPR1_FEC_MASK    (IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK \
+				| IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK)
+
+#define IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK (0x1 << 17)
+#define IOMUX_GPR1_FEC1_CLOCK_MUX2_SEL_MASK (0x1 << 13)
+#define IOMUX_GPR1_FEC1_MASK	(IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK \
+				| IOMUX_GPR1_FEC1_CLOCK_MUX2_SEL_MASK)
+
+#define IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK (0x1 << 18)
+#define IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK (0x1 << 14)
+#define IOMUX_GPR1_FEC2_MASK	(IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK \
+				| IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK)
+
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB	(0<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB	(1<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB	(2<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB	(3<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB	(4<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB	(5<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB	(6<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB	(7<<24)
+
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1I	(0x10<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1M	(0x10<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1X	(0x1A<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2I	(0x12<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2M	(0x12<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2X	(0x1A<<19)
+
+#define IOMUXC_GPR13_SATA_SPEED_1P5G	(0<<15)
+#define IOMUXC_GPR13_SATA_SPEED_3G	(1<<15)
+
+#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED	(0<<14)
+#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_ENABLED		(1<<14)
+
+#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_16_16	(0<<11)
+#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_14_16	(1<<11)
+#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_12_16	(2<<11)
+#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_10_16	(3<<11)
+#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16		(4<<11)
+#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16		(5<<11)
+
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB	(0<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB	(1<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB	(2<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB	(3<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB	(4<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB	(5<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB	(6<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB	(7<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB	(8<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB	(9<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB	(0xA<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB	(0xB<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB	(0xC<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB	(0xD<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB	(0xE<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB	(0xF<<7)
+
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V	(0<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V	(1<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V	(2<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V	(3<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V	(4<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V	(5<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V	(6<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V	(7<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V	(8<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V	(9<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V	(0xA<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V	(0xB<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V	(0xC<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V	(0xD<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V	(0xE<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V	(0xF<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V	(0x10<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V	(0x11<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V	(0x12<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V	(0x13<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V	(0x14<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V	(0x15<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V	(0x16<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V	(0x17<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V	(0x18<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V	(0x19<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V	(0x1A<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V	(0x1B<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V	(0x1C<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V	(0x1D<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V	(0x1E<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V	(0x1F<<2)
+
+#define IOMUXC_GPR13_SATA_PHY_1_FAST	0
+#define IOMUXC_GPR13_SATA_PHY_1_MEDIUM	1
+#define IOMUXC_GPR13_SATA_PHY_1_SLOW	2
+
+#define IOMUXC_GPR13_SATA_MASK (IOMUXC_GPR13_SATA_PHY_8_MASK \
+				|IOMUXC_GPR13_SATA_PHY_7_MASK \
+				|IOMUXC_GPR13_SATA_PHY_6_MASK \
+				|IOMUXC_GPR13_SATA_SPEED_MASK \
+				|IOMUXC_GPR13_SATA_PHY_5_MASK \
+				|IOMUXC_GPR13_SATA_PHY_4_MASK \
+				|IOMUXC_GPR13_SATA_PHY_3_MASK \
+				|IOMUXC_GPR13_SATA_PHY_2_MASK \
+				|IOMUXC_GPR13_SATA_PHY_1_MASK)
+
+/*
+ * Setup RGMII voltage levels on iMX6 SoC - the
+ *
+ * IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE_RGMII - register
+ *
+ * 1P2V_IO - USB_HSIC, MIPI_HSI
+ * 1P5V_IO - ENET pins
+ */
+#define IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE_RGMII	0x020e0790
+#define DDR_SEL_1P2V_IO (0x2 << 18)
+#define DDR_SEL_1P5V_IO (0x3 << 18)
+
+#endif	/* __ASM_ARCH_IOMUX_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/litesom.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/litesom.h
new file mode 100644
index 000000000..37a16d2c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/litesom.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Grinn
+ */
+
+#ifndef __ARCH_ARM_MX6UL_LITESOM_H__
+#define __ARCH_ARM_MX6UL_LITESOM_H__
+
+int litesom_mmc_init(struct bd_info *bis);
+
+#ifdef CONFIG_SPL_BUILD
+void litesom_init_f(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6-ddr.h
new file mode 100644
index 000000000..dbc97b25d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6-ddr.h
@@ -0,0 +1,549 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Boundary Devices Inc.
+ */
+#ifndef __ASM_ARCH_MX6_DDR_H__
+#define __ASM_ARCH_MX6_DDR_H__
+
+#ifndef CONFIG_SPL_BUILD
+#ifdef CONFIG_MX6Q
+#include "mx6q-ddr.h"
+#else
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#include "mx6dl-ddr.h"
+#else
+#ifdef CONFIG_MX6SX
+#include "mx6sx-ddr.h"
+#else
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+#include "mx6ul-ddr.h"
+#else
+#ifdef CONFIG_MX6SL
+#include "mx6sl-ddr.h"
+#else
+#error "Please select cpu"
+#endif	/* CONFIG_MX6SL */
+#endif	/* CONFIG_MX6UL */
+#endif	/* CONFIG_MX6SX */
+#endif	/* CONFIG_MX6DL or CONFIG_MX6S */
+#endif	/* CONFIG_MX6Q */
+#else
+
+enum {
+	DDR_TYPE_DDR3,
+	DDR_TYPE_LPDDR2,
+};
+
+/* MMDC P0/P1 Registers */
+struct mmdc_p_regs {
+	u32 mdctl;
+	u32 mdpdc;
+	u32 mdotc;
+	u32 mdcfg0;
+	u32 mdcfg1;
+	u32 mdcfg2;
+	u32 mdmisc;
+	u32 mdscr;
+	u32 mdref;
+	u32 res1[2];
+	u32 mdrwd;
+	u32 mdor;
+	u32 mdmrr;
+	u32 mdcfg3lp;
+	u32 mdmr4;
+	u32 mdasp;
+	u32 res2[239];
+	u32 maarcr;
+	u32 mapsr;
+	u32 maexidr0;
+	u32 maexidr1;
+	u32 madpcr0;
+	u32 madpcr1;
+	u32 madpsr0;
+	u32 madpsr1;
+	u32 madpsr2;
+	u32 madpsr3;
+	u32 madpsr4;
+	u32 madpsr5;
+	u32 masbs0;
+	u32 masbs1;
+	u32 res3[2];
+	u32 magenp;
+	u32 res4[239];
+	u32 mpzqhwctrl;
+	u32 mpzqswctrl;
+	u32 mpwlgcr;
+	u32 mpwldectrl0;
+	u32 mpwldectrl1;
+	u32 mpwldlst;
+	u32 mpodtctrl;
+	u32 mprddqby0dl;
+	u32 mprddqby1dl;
+	u32 mprddqby2dl;
+	u32 mprddqby3dl;
+	u32 mpwrdqby0dl;
+	u32 mpwrdqby1dl;
+	u32 mpwrdqby2dl;
+	u32 mpwrdqby3dl;
+	u32 mpdgctrl0;
+	u32 mpdgctrl1;
+	u32 mpdgdlst0;
+	u32 mprddlctl;
+	u32 mprddlst;
+	u32 mpwrdlctl;
+	u32 mpwrdlst;
+	u32 mpsdctrl;
+	u32 mpzqlp2ctl;
+	u32 mprddlhwctl;
+	u32 mpwrdlhwctl;
+	u32 mprddlhwst0;
+	u32 mprddlhwst1;
+	u32 mpwrdlhwst0;
+	u32 mpwrdlhwst1;
+	u32 mpwlhwerr;
+	u32 mpdghwst0;
+	u32 mpdghwst1;
+	u32 mpdghwst2;
+	u32 mpdghwst3;
+	u32 mppdcmpr1;
+	u32 mppdcmpr2;
+	u32 mpswdar0;
+	u32 mpswdrdr0;
+	u32 mpswdrdr1;
+	u32 mpswdrdr2;
+	u32 mpswdrdr3;
+	u32 mpswdrdr4;
+	u32 mpswdrdr5;
+	u32 mpswdrdr6;
+	u32 mpswdrdr7;
+	u32 mpmur0;
+	u32 mpwrcadl;
+	u32 mpdccr;
+};
+
+#define MX6SL_IOM_DDR_BASE     0x020e0300
+struct mx6sl_iomux_ddr_regs {
+	u32 dram_cas;
+	u32 dram_cs0_b;
+	u32 dram_cs1_b;
+	u32 dram_dqm0;
+	u32 dram_dqm1;
+	u32 dram_dqm2;
+	u32 dram_dqm3;
+	u32 dram_ras;
+	u32 dram_reset;
+	u32 dram_sdba0;
+	u32 dram_sdba1;
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdcke1;
+	u32 dram_sdclk_0;
+	u32 dram_odt0;
+	u32 dram_odt1;
+	u32 dram_sdqs0;
+	u32 dram_sdqs1;
+	u32 dram_sdqs2;
+	u32 dram_sdqs3;
+	u32 dram_sdwe_b;
+};
+
+#define MX6SL_IOM_GRP_BASE     0x020e0500
+struct mx6sl_iomux_grp_regs {
+	u32 res1[43];
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 grp_ddrpke;
+	u32 grp_ddrpk;
+	u32 grp_ddrhys;
+	u32 grp_ddrmode;
+	u32 grp_b0ds;
+	u32 grp_ctlds;
+	u32 grp_b1ds;
+	u32 grp_ddr_type;
+	u32 grp_b2ds;
+	u32 grp_b3ds;
+};
+
+#define MX6UL_IOM_DDR_BASE	0x020e0200
+struct mx6ul_iomux_ddr_regs {
+	u32 res1[17];
+	u32 dram_dqm0;
+	u32 dram_dqm1;
+	u32 dram_ras;
+	u32 dram_cas;
+	u32 dram_cs0;
+	u32 dram_cs1;
+	u32 dram_sdwe_b;
+	u32 dram_odt0;
+	u32 dram_odt1;
+	u32 dram_sdba0;
+	u32 dram_sdba1;
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdcke1;
+	u32 dram_sdclk_0;
+	u32 dram_sdqs0;
+	u32 dram_sdqs1;
+	u32 dram_reset;
+};
+
+#define MX6UL_IOM_GRP_BASE	0x020e0400
+struct mx6ul_iomux_grp_regs {
+	u32 res1[36];
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 grp_b0ds;
+	u32 grp_ddrpk;
+	u32 grp_ctlds;
+	u32 grp_b1ds;
+	u32 grp_ddrhys;
+	u32 grp_ddrpke;
+	u32 grp_ddrmode;
+	u32 grp_ddr_type;
+};
+
+#define MX6SX_IOM_DDR_BASE	0x020e0200
+struct mx6sx_iomux_ddr_regs {
+	u32 res1[59];
+	u32 dram_dqm0;
+	u32 dram_dqm1;
+	u32 dram_dqm2;
+	u32 dram_dqm3;
+	u32 dram_ras;
+	u32 dram_cas;
+	u32 res2[2];
+	u32 dram_sdwe_b;
+	u32 dram_odt0;
+	u32 dram_odt1;
+	u32 dram_sdba0;
+	u32 dram_sdba1;
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdcke1;
+	u32 dram_sdclk_0;
+	u32 dram_sdqs0;
+	u32 dram_sdqs1;
+	u32 dram_sdqs2;
+	u32 dram_sdqs3;
+	u32 dram_reset;
+};
+
+#define MX6SX_IOM_GRP_BASE	0x020e0500
+struct mx6sx_iomux_grp_regs {
+	u32 res1[61];
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 grp_ddrpke;
+	u32 grp_ddrpk;
+	u32 grp_ddrhys;
+	u32 grp_ddrmode;
+	u32 grp_b0ds;
+	u32 grp_b1ds;
+	u32 grp_ctlds;
+	u32 grp_ddr_type;
+	u32 grp_b2ds;
+	u32 grp_b3ds;
+};
+
+/*
+ * MMDC iomux registers (pinctl/padctl) - (different for IMX6DQ vs IMX6SDL)
+ */
+#define MX6DQ_IOM_DDR_BASE      0x020e0500
+struct mx6dq_iomux_ddr_regs {
+	u32 res1[3];
+	u32 dram_sdqs5;
+	u32 dram_dqm5;
+	u32 dram_dqm4;
+	u32 dram_sdqs4;
+	u32 dram_sdqs3;
+	u32 dram_dqm3;
+	u32 dram_sdqs2;
+	u32 dram_dqm2;
+	u32 res2[16];
+	u32 dram_cas;
+	u32 res3[2];
+	u32 dram_ras;
+	u32 dram_reset;
+	u32 res4[2];
+	u32 dram_sdclk_0;
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdclk_1;
+	u32 dram_sdcke1;
+	u32 dram_sdodt0;
+	u32 dram_sdodt1;
+	u32 res5;
+	u32 dram_sdqs0;
+	u32 dram_dqm0;
+	u32 dram_sdqs1;
+	u32 dram_dqm1;
+	u32 dram_sdqs6;
+	u32 dram_dqm6;
+	u32 dram_sdqs7;
+	u32 dram_dqm7;
+};
+
+#define MX6DQ_IOM_GRP_BASE      0x020e0700
+struct mx6dq_iomux_grp_regs {
+	u32 res1[18];
+	u32 grp_b7ds;
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 res2;
+	u32 grp_ddrpke;
+	u32 res3[6];
+	u32 grp_ddrmode;
+	u32 res4[3];
+	u32 grp_b0ds;
+	u32 grp_b1ds;
+	u32 grp_ctlds;
+	u32 res5;
+	u32 grp_b2ds;
+	u32 grp_ddr_type;
+	u32 grp_b3ds;
+	u32 grp_b4ds;
+	u32 grp_b5ds;
+	u32 grp_b6ds;
+};
+
+/*
+ * NoC scheduler registers - only on IMX6DQP
+ */
+#define MX6DQP_NOC_SCHED_BASE	0x00bb0000
+struct mx6dqp_noc_sched_regs {
+	u32 coreid;
+	u32 revid;
+	u32 ddrconf;
+	u32 ddrtiming;
+	u32 ddrmode;
+	u32 rlat;
+	u32 res1[4];
+	u32 ipu1;
+	u32 ipu2;
+	u32 res2[2];
+	u32 activate;
+	u32 res3[16];
+};
+
+#define MX6SDL_IOM_DDR_BASE     0x020e0400
+struct mx6sdl_iomux_ddr_regs {
+	u32 res1[25];
+	u32 dram_cas;
+	u32 res2[2];
+	u32 dram_dqm0;
+	u32 dram_dqm1;
+	u32 dram_dqm2;
+	u32 dram_dqm3;
+	u32 dram_dqm4;
+	u32 dram_dqm5;
+	u32 dram_dqm6;
+	u32 dram_dqm7;
+	u32 dram_ras;
+	u32 dram_reset;
+	u32 res3[2];
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdcke1;
+	u32 dram_sdclk_0;
+	u32 dram_sdclk_1;
+	u32 dram_sdodt0;
+	u32 dram_sdodt1;
+	u32 dram_sdqs0;
+	u32 dram_sdqs1;
+	u32 dram_sdqs2;
+	u32 dram_sdqs3;
+	u32 dram_sdqs4;
+	u32 dram_sdqs5;
+	u32 dram_sdqs6;
+	u32 dram_sdqs7;
+};
+
+#define MX6SDL_IOM_GRP_BASE     0x020e0700
+struct mx6sdl_iomux_grp_regs {
+	u32 res1[18];
+	u32 grp_b7ds;
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 grp_ddrpke;
+	u32 res2[2];
+	u32 grp_ddrmode;
+	u32 grp_b0ds;
+	u32 res3;
+	u32 grp_ctlds;
+	u32 grp_b1ds;
+	u32 grp_ddr_type;
+	u32 grp_b2ds;
+	u32 grp_b3ds;
+	u32 grp_b4ds;
+	u32 grp_b5ds;
+	u32 res4;
+	u32 grp_b6ds;
+};
+
+/* Device Information: Varies per DDR3 part number and speed grade */
+struct mx6_ddr3_cfg {
+	u16 mem_speed;	/* ie 1600 for DDR3-1600 (800,1066,1333,1600) */
+	u8 density;	/* chip density (Gb) (1,2,4,8) */
+	u8 width;	/* bus width (bits) (4,8,16) */
+	u8 banks;	/* number of banks */
+	u8 rowaddr;	/* row address bits (11-16)*/
+	u8 coladdr;	/* col address bits (9-12) */
+	u8 pagesz;	/* page size (K) (1-2) */
+	u16 trcd;	/* tRCD=tRP=CL (ns*100) */
+	u16 trcmin;	/* tRC min (ns*100) */
+	u16 trasmin;	/* tRAS min (ns*100) */
+	u8 SRT;		/* self-refresh temperature: 0=normal, 1=extended */
+};
+
+/* Device Information: Varies per LPDDR2 part number and speed grade */
+struct mx6_lpddr2_cfg {
+	u16 mem_speed;	/* ie 800 for LPDDR2-800 */
+	u8 density;	/* chip density (Gb) (1,2,4,8) */
+	u8 width;	/* bus width (bits) (4,8,16) */
+	u8 banks;	/* number of banks */
+	u8 rowaddr;	/* row address bits (11-16)*/
+	u8 coladdr;	/* col address bits (9-12) */
+	u16 trcd_lp;
+	u16 trppb_lp;
+	u16 trpab_lp;
+	u16 trcmin;	/* tRC min (ns*100) */
+	u16 trasmin;	/* tRAS min (ns*100) */
+};
+
+/* System Information: Varies per board design, layout, and term choices */
+struct mx6_ddr_sysinfo {
+	u8 dsize;	/* size of bus (in dwords: 0=16bit,1=32bit,2=64bit) */
+	u8 cs_density;	/* density per chip select (Gb) */
+	u8 ncs;		/* number chip selects used (1|2) */
+	char cs1_mirror;/* enable address mirror (0|1) */
+	char bi_on;	/* Bank interleaving enable */
+	u8 rtt_nom;	/* Rtt_Nom (DDR3_RTT_*) */
+	u8 rtt_wr;	/* Rtt_Wr (DDR3_RTT_*) */
+	u8 ralat;	/* Read Additional Latency (0-7) */
+	u8 walat;	/* Write Additional Latency (0-3) */
+	u8 mif3_mode;	/* Command prediction working mode */
+	u8 rst_to_cke;	/* Time from SDE enable to CKE rise */
+	u8 sde_to_rst;	/* Time from SDE enable until DDR reset# is high */
+	u8 pd_fast_exit;/* enable precharge powerdown fast-exit */
+	u8 ddr_type;	/* DDR type: DDR3(0) or LPDDR2(1) */
+	u8 refsel;	/* REF_SEL field of register MDREF */
+	u8 refr;	/* REFR field of register MDREF */
+};
+
+/*
+ * Board specific calibration:
+ *   This includes write leveling calibration values as well as DQS gating
+ *   and read/write delays. These values are board/layout/device specific.
+ *   Freescale recommends using the i.MX6 DDR Stress Test Tool V1.0.2
+ *   (DOC-96412) to determine these values over a range of boards and
+ *   temperatures.
+ */
+struct mx6_mmdc_calibration {
+	/* write leveling calibration */
+	u32 p0_mpwldectrl0;
+	u32 p0_mpwldectrl1;
+	u32 p1_mpwldectrl0;
+	u32 p1_mpwldectrl1;
+	/* read DQS gating */
+	u32 p0_mpdgctrl0;
+	u32 p0_mpdgctrl1;
+	u32 p1_mpdgctrl0;
+	u32 p1_mpdgctrl1;
+	/* read delay */
+	u32 p0_mprddlctl;
+	u32 p1_mprddlctl;
+	/* write delay */
+	u32 p0_mpwrdlctl;
+	u32 p1_mpwrdlctl;
+	/* lpddr2 zq hw calibration */
+	u32 mpzqlp2ctl;
+};
+
+/* configure iomux (pinctl/padctl) */
+void mx6dq_dram_iocfg(unsigned width,
+		      const struct mx6dq_iomux_ddr_regs *,
+		      const struct mx6dq_iomux_grp_regs *);
+void mx6sdl_dram_iocfg(unsigned width,
+		       const struct mx6sdl_iomux_ddr_regs *,
+		       const struct mx6sdl_iomux_grp_regs *);
+void mx6sx_dram_iocfg(unsigned width,
+		      const struct mx6sx_iomux_ddr_regs *,
+		      const struct mx6sx_iomux_grp_regs *);
+void mx6ul_dram_iocfg(unsigned width,
+		      const struct mx6ul_iomux_ddr_regs *,
+		      const struct mx6ul_iomux_grp_regs *);
+void mx6sl_dram_iocfg(unsigned width,
+		      const struct mx6sl_iomux_ddr_regs *,
+		      const struct mx6sl_iomux_grp_regs *);
+
+#if defined(CONFIG_MX6_DDRCAL)
+int mmdc_do_write_level_calibration(struct mx6_ddr_sysinfo const *sysinfo);
+int mmdc_do_dqs_calibration(struct mx6_ddr_sysinfo const *sysinfo);
+void mmdc_read_calibration(struct mx6_ddr_sysinfo const *sysinfo,
+                           struct mx6_mmdc_calibration *calib);
+#endif
+
+/* configure mx6 mmdc registers */
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
+		  const struct mx6_mmdc_calibration *,
+		  const void *);
+
+#endif /* CONFIG_SPL_BUILD */
+
+#define MX6_MMDC_P0_MDCTL	0x021b0000
+#define MX6_MMDC_P0_MDPDC	0x021b0004
+#define MX6_MMDC_P0_MDOTC	0x021b0008
+#define MX6_MMDC_P0_MDCFG0	0x021b000c
+#define MX6_MMDC_P0_MDCFG1	0x021b0010
+#define MX6_MMDC_P0_MDCFG2	0x021b0014
+#define MX6_MMDC_P0_MDMISC	0x021b0018
+#define MX6_MMDC_P0_MDSCR	0x021b001c
+#define MX6_MMDC_P0_MDREF	0x021b0020
+#define MX6_MMDC_P0_MDRWD	0x021b002c
+#define MX6_MMDC_P0_MDOR	0x021b0030
+#define MX6_MMDC_P0_MDASP	0x021b0040
+#define MX6_MMDC_P0_MAPSR	0x021b0404
+#define MX6_MMDC_P0_MPZQHWCTRL	0x021b0800
+#define MX6_MMDC_P0_MPWLDECTRL0	0x021b080c
+#define MX6_MMDC_P0_MPWLDECTRL1	0x021b0810
+#define MX6_MMDC_P0_MPODTCTRL	0x021b0818
+#define MX6_MMDC_P0_MPRDDQBY0DL	0x021b081c
+#define MX6_MMDC_P0_MPRDDQBY1DL	0x021b0820
+#define MX6_MMDC_P0_MPRDDQBY2DL	0x021b0824
+#define MX6_MMDC_P0_MPRDDQBY3DL	0x021b0828
+#define MX6_MMDC_P0_MPDGCTRL0	0x021b083c
+#define MX6_MMDC_P0_MPDGCTRL1	0x021b0840
+#define MX6_MMDC_P0_MPRDDLCTL	0x021b0848
+#define MX6_MMDC_P0_MPWRDLCTL	0x021b0850
+#define MX6_MMDC_P0_MPZQLP2CTL	0x021b085C
+#define MX6_MMDC_P0_MPMUR0	0x021b08b8
+
+#define MX6_MMDC_P1_MDCTL	0x021b4000
+#define MX6_MMDC_P1_MDPDC	0x021b4004
+#define MX6_MMDC_P1_MDOTC	0x021b4008
+#define MX6_MMDC_P1_MDCFG0	0x021b400c
+#define MX6_MMDC_P1_MDCFG1	0x021b4010
+#define MX6_MMDC_P1_MDCFG2	0x021b4014
+#define MX6_MMDC_P1_MDMISC	0x021b4018
+#define MX6_MMDC_P1_MDSCR	0x021b401c
+#define MX6_MMDC_P1_MDREF	0x021b4020
+#define MX6_MMDC_P1_MDRWD	0x021b402c
+#define MX6_MMDC_P1_MDOR	0x021b4030
+#define MX6_MMDC_P1_MDASP	0x021b4040
+#define MX6_MMDC_P1_MAPSR	0x021b4404
+#define MX6_MMDC_P1_MPZQHWCTRL	0x021b4800
+#define MX6_MMDC_P1_MPWLDECTRL0	0x021b480c
+#define MX6_MMDC_P1_MPWLDECTRL1	0x021b4810
+#define MX6_MMDC_P1_MPODTCTRL	0x021b4818
+#define MX6_MMDC_P1_MPRDDQBY0DL	0x021b481c
+#define MX6_MMDC_P1_MPRDDQBY1DL	0x021b4820
+#define MX6_MMDC_P1_MPRDDQBY2DL	0x021b4824
+#define MX6_MMDC_P1_MPRDDQBY3DL	0x021b4828
+#define MX6_MMDC_P1_MPDGCTRL0	0x021b483c
+#define MX6_MMDC_P1_MPDGCTRL1	0x021b4840
+#define MX6_MMDC_P1_MPRDDLCTL	0x021b4848
+#define MX6_MMDC_P1_MPWRDLCTL	0x021b4850
+#define MX6_MMDC_P1_MPZQLP2CTL	0x021b485C
+#define MX6_MMDC_P1_MPMUR0	0x021b48b8
+
+#endif	/*__ASM_ARCH_MX6_DDR_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6-pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6-pins.h
new file mode 100644
index 000000000..9a99a6b70
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6-pins.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Boundary Devices Inc.
+ */
+#ifndef __ASM_ARCH_MX6_PINS_H__
+#define __ASM_ARCH_MX6_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+#define MX6_PAD_DECLARE(prefix, name, pco, mc, mm, sio, si, pc) \
+	prefix##name = IOMUX_PAD(pco, mc, mm, sio, si, pc)
+
+#ifdef CONFIG_MX6QDL
+enum {
+#define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
+	MX6_PAD_DECLARE(MX6Q_PAD_,name, pco, mc, mm, sio, si, pc),
+#include "mx6q_pins.h"
+#undef MX6_PAD_DECL
+#define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
+	MX6_PAD_DECLARE(MX6DL_PAD_,name, pco, mc, mm, sio, si, pc),
+#include "mx6dl_pins.h"
+};
+#elif defined(CONFIG_MX6Q)
+enum {
+#define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
+	MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc),
+#include "mx6q_pins.h"
+};
+#elif defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+enum {
+#define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
+	MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc),
+#include "mx6dl_pins.h"
+};
+#elif defined(CONFIG_MX6SLL)
+#include "mx6sll_pins.h"
+#elif defined(CONFIG_MX6SL)
+#include "mx6sl_pins.h"
+#elif defined(CONFIG_MX6SX)
+#include "mx6sx_pins.h"
+#elif defined(CONFIG_MX6ULL)
+#include "mx6ull_pins.h"
+#elif defined(CONFIG_MX6UL)
+#include "mx6ul_pins.h"
+#else
+#error "Please select cpu"
+#endif	/* CONFIG_MX6Q */
+
+#endif	/*__ASM_ARCH_MX6_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6_plugin.S b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6_plugin.S
new file mode 100644
index 000000000..7e61d22ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6_plugin.S
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_ROM_UNIFIED_SECTIONS
+#define ROM_API_TABLE_BASE_ADDR_LEGACY		0x180
+#define ROM_VERSION_OFFSET               	0x80
+#else
+#define ROM_API_TABLE_BASE_ADDR_LEGACY		0xC0
+#define ROM_VERSION_OFFSET               	0x48
+#endif
+#define ROM_API_TABLE_BASE_ADDR_MX6DQ_TO15	0xC4
+#define ROM_API_TABLE_BASE_ADDR_MX6DL_TO12	0xC4
+#define ROM_API_HWCNFG_SETUP_OFFSET		0x08
+#define ROM_VERSION_TO10			0x10
+#define ROM_VERSION_TO12			0x12
+#define ROM_VERSION_TO15			0x15
+
+plugin_start:
+
+	push    {r0-r4, lr}
+
+	imx6_ddr_setting
+	imx6_clock_gating
+	imx6_qos_setting
+
+/*
+ * The following is to fill in those arguments for this ROM function
+ * pu_irom_hwcnfg_setup(void **start, size_t *bytes, const void *boot_data)
+ * This function is used to copy data from the storage media into DDR.
+ * start - Initial (possibly partial) image load address on entry.
+ *         Final image load address on exit.
+ * bytes - Initial (possibly partial) image size on entry.
+ *         Final image size on exit.
+ * boot_data - Initial @ref ivt Boot Data load address.
+ */
+	adr r0, boot_data2
+	adr r1, image_len2
+	adr r2, boot_data2
+
+#ifdef CONFIG_NOR_BOOT
+#ifdef CONFIG_MX6SX
+	ldr r3, =ROM_VERSION_OFFSET
+	ldr r4, [r3]
+	cmp r4, #ROM_VERSION_TO10
+	bgt before_calling_rom___pu_irom_hwcnfg_setup
+	ldr r3, =0x00900b00
+	ldr r4, =0x50000000
+	str r4, [r3, #0x5c]
+#else
+	ldr r3, =0x00900800
+	ldr r4, =0x08000000
+	str r4, [r3, #0xc0]
+#endif
+#endif
+
+/*
+ * check the _pu_irom_api_table for the address
+ */
+before_calling_rom___pu_irom_hwcnfg_setup:
+	ldr r3, =ROM_VERSION_OFFSET
+	ldr r4, [r3]
+#if defined(CONFIG_MX6SOLO) || defined(CONFIG_MX6DL)
+	ldr r3, =ROM_VERSION_TO12
+	cmp r4, r3
+	ldrge r3, =ROM_API_TABLE_BASE_ADDR_MX6DL_TO12
+	ldrlt r3, =ROM_API_TABLE_BASE_ADDR_LEGACY
+#elif defined(CONFIG_MX6Q)
+	ldr r3, =ROM_VERSION_TO15
+	cmp r4, r3
+	ldrge r3, =ROM_API_TABLE_BASE_ADDR_MX6DQ_TO15
+	ldrlt r3, =ROM_API_TABLE_BASE_ADDR_LEGACY
+#else
+	ldr r3, =ROM_API_TABLE_BASE_ADDR_LEGACY
+#endif
+	ldr r4, [r3, #ROM_API_HWCNFG_SETUP_OFFSET]
+	blx r4
+after_calling_rom___pu_irom_hwcnfg_setup:
+
+/*
+ * ROM_API_HWCNFG_SETUP function enables MMU & Caches.
+ * Thus disable MMU & Caches.
+ */
+
+	mrc     p15, 0, r0, c1, c0, 0   /* read CP15 register 1 into r0*/
+	ands    r0, r0, #0x1            /* check if MMU is enabled */
+	beq     mmu_disable_notreq      /* exit if MMU is already disabled */
+
+	/* Disable caches, MMU */
+	mrc     p15, 0, r0, c1, c0, 0	/* read CP15 register 1 into r0 */
+	bic     r0, r0, #(1 << 2)	/* disable D Cache */
+	bic     r0, r0, #0x1		/* clear bit 0 ; MMU off */
+
+	bic     r0, r0, #(0x1 << 11)	/* disable Z, branch prediction */
+	bic     r0, r0, #(0x1 << 1)	/* disable A, Strict alignment */
+					/* check enabled. */
+	mcr     p15, 0, r0, c1, c0, 0	/* write CP15 register 1 */
+	mov     r0, r0
+	mov     r0, r0
+	mov     r0, r0
+	mov     r0, r0
+
+mmu_disable_notreq:
+    NOP
+
+/* To return to ROM from plugin, we need to fill in these argument.
+ * Here is what need to do:
+ * Need to construct the paramters for this function before return to ROM:
+ * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset)
+ */
+	pop {r0-r4, lr}
+	push {r5}
+	ldr r5, boot_data2
+	str r5, [r0]
+	ldr r5, image_len2
+	str r5, [r1]
+	ldr r5, second_ivt_offset
+	str r5, [r2]
+	mov r0, #1
+	pop {r5}
+
+	/* return back to ROM code */
+	bx lr
+
+/* make the following data right in the end of the output*/
+.ltorg
+
+#if (defined(CONFIG_NOR_BOOT) || defined(CONFIG_QSPI_BOOT))
+#define FLASH_OFFSET 0x1000
+#else
+#define FLASH_OFFSET 0x400
+#endif
+
+/*
+ * second_ivt_offset is the offset from the "second_ivt_header" to
+ * "image_copy_start", which involves FLASH_OFFSET, plus the first
+ * ivt_header, the plugin code size itself recorded by "ivt2_header"
+ */
+
+second_ivt_offset:      .long (ivt2_header + 0x2C + FLASH_OFFSET)
+
+/*
+ * The following is the second IVT header plus the second boot data
+ */
+ivt2_header:            .long 0x0
+app2_code_jump_v:       .long 0x0
+reserv3:                .long 0x0
+dcd2_ptr:               .long 0x0
+boot_data2_ptr:         .long 0x0
+self_ptr2:              .long 0x0
+app_code_csf2:          .long 0x0
+reserv4:                .long 0x0
+boot_data2:             .long 0x0
+image_len2:             .long 0x0
+plugin2:                .long 0x0
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
new file mode 100644
index 000000000..2b2821da2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Boundary Devices Inc.
+ */
+#ifndef __ASM_ARCH_MX6DLS_DDR_H__
+#define __ASM_ARCH_MX6DLS_DDR_H__
+
+#ifndef CONFIG_MX6DL
+#ifndef CONFIG_MX6S
+#error "wrong CPU"
+#endif
+#endif
+
+#define MX6_IOM_DRAM_DQM0	0x020e0470
+#define MX6_IOM_DRAM_DQM1	0x020e0474
+#define MX6_IOM_DRAM_DQM2	0x020e0478
+#define MX6_IOM_DRAM_DQM3	0x020e047c
+#define MX6_IOM_DRAM_DQM4	0x020e0480
+#define MX6_IOM_DRAM_DQM5	0x020e0484
+#define MX6_IOM_DRAM_DQM6	0x020e0488
+#define MX6_IOM_DRAM_DQM7	0x020e048c
+
+#define MX6_IOM_DRAM_CAS	0x020e0464
+#define MX6_IOM_DRAM_RAS	0x020e0490
+#define MX6_IOM_DRAM_RESET	0x020e0494
+#define MX6_IOM_DRAM_SDCLK_0	0x020e04ac
+#define MX6_IOM_DRAM_SDCLK_1	0x020e04b0
+#define MX6_IOM_DRAM_SDBA2	0x020e04a0
+#define MX6_IOM_DRAM_SDCKE0	0x020e04a4
+#define MX6_IOM_DRAM_SDCKE1	0x020e04a8
+#define MX6_IOM_DRAM_SDODT0	0x020e04b4
+#define MX6_IOM_DRAM_SDODT1	0x020e04b8
+
+#define MX6_IOM_DRAM_SDQS0	0x020e04bc
+#define MX6_IOM_DRAM_SDQS1	0x020e04c0
+#define MX6_IOM_DRAM_SDQS2	0x020e04c4
+#define MX6_IOM_DRAM_SDQS3	0x020e04c8
+#define MX6_IOM_DRAM_SDQS4	0x020e04cc
+#define MX6_IOM_DRAM_SDQS5	0x020e04d0
+#define MX6_IOM_DRAM_SDQS6	0x020e04d4
+#define MX6_IOM_DRAM_SDQS7	0x020e04d8
+
+#define MX6_IOM_GRP_B0DS	0x020e0764
+#define MX6_IOM_GRP_B1DS	0x020e0770
+#define MX6_IOM_GRP_B2DS	0x020e0778
+#define MX6_IOM_GRP_B3DS	0x020e077c
+#define MX6_IOM_GRP_B4DS	0x020e0780
+#define MX6_IOM_GRP_B5DS	0x020e0784
+#define MX6_IOM_GRP_B6DS	0x020e078c
+#define MX6_IOM_GRP_B7DS	0x020e0748
+#define MX6_IOM_GRP_ADDDS	0x020e074c
+#define MX6_IOM_DDRMODE_CTL	0x020e0750
+#define MX6_IOM_GRP_DDRPKE	0x020e0754
+#define MX6_IOM_GRP_DDRMODE	0x020e0760
+#define MX6_IOM_GRP_CTLDS	0x020e076c
+#define MX6_IOM_GRP_DDR_TYPE	0x020e0774
+
+#endif	/*__ASM_ARCH_MX6S_DDR_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
new file mode 100644
index 000000000..c207a752f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -0,0 +1,1079 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __ASM_ARCH_MX6_MX6DL_PINS_H__
+#define __ASM_ARCH_MX6_MX6DL_PINS_H__
+
+MX6_PAD_DECL(CSI0_DAT10__IPU1_CSI0_DATA10,	0x0360, 0x004C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__AUD3_RXC,	0x0360, 0x004C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__ECSPI2_MISO,	0x0360, 0x004C, 2, 0x07F8, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__UART1_TX_DATA,	0x0360, 0x004C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__UART1_RX_DATA,	0x0360, 0x004C, 3, 0x08FC, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__GPIO5_IO28,	0x0360, 0x004C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__ARM_TRACE07,	0x0360, 0x004C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__IPU1_CSI0_DATA11,	0x0364, 0x0050, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__AUD3_RXFS,	0x0364, 0x0050, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__ECSPI2_SS0,	0x0364, 0x0050, 2, 0x0800, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__UART1_TX_DATA,	0x0364, 0x0050, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__UART1_RX_DATA,	0x0364, 0x0050, 3, 0x08FC, 1, 0)
+MX6_PAD_DECL(CSI0_DAT11__GPIO5_IO29,	0x0364, 0x0050, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__ARM_TRACE08,	0x0364, 0x0050, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__IPU1_CSI0_DATA12,	0x0368, 0x0054, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__EIM_DATA08,	0x0368, 0x0054, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__UART4_TX_DATA,	0x0368, 0x0054, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__UART4_RX_DATA,	0x0368, 0x0054, 3, 0x0914, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__GPIO5_IO30,	0x0368, 0x0054, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__ARM_TRACE09,	0x0368, 0x0054, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__IPU1_CSI0_DATA13,	0x036C, 0x0058, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__EIM_DATA09,	0x036C, 0x0058, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__UART4_TX_DATA,	0x036C, 0x0058, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__UART4_RX_DATA,	0x036C, 0x0058, 3, 0x0914, 1, 0)
+MX6_PAD_DECL(CSI0_DAT13__GPIO5_IO31,	0x036C, 0x0058, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__ARM_TRACE10,	0x036C, 0x0058, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__IPU1_CSI0_DATA14,	0x0370, 0x005C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__EIM_DATA10,	0x0370, 0x005C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__UART5_TX_DATA,	0x0370, 0x005C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__UART5_RX_DATA,	0x0370, 0x005C, 3, 0x091C, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__GPIO6_IO00,	0x0370, 0x005C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__ARM_TRACE11,	0x0370, 0x005C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__IPU1_CSI0_DATA15,	0x0374, 0x0060, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__EIM_DATA11,	0x0374, 0x0060, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__UART5_TX_DATA,	0x0374, 0x0060, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__UART5_RX_DATA,	0x0374, 0x0060, 3, 0x091C, 1, 0)
+MX6_PAD_DECL(CSI0_DAT15__GPIO6_IO01,	0x0374, 0x0060, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__ARM_TRACE12,	0x0374, 0x0060, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__IPU1_CSI0_DATA16,	0x0378, 0x0064, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__EIM_DATA12,	0x0378, 0x0064, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__UART4_CTS_B,	0x0378, 0x0064, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__UART4_RTS_B,	0x0378, 0x0064, 3, 0x0910, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__GPIO6_IO02,	0x0378, 0x0064, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__ARM_TRACE13,	0x0378, 0x0064, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__IPU1_CSI0_DATA17,	0x037C, 0x0068, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__EIM_DATA13,	0x037C, 0x0068, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__UART4_CTS_B,	0x037C, 0x0068, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__UART4_RTS_B,	0x037C, 0x0068, 3, 0x0910, 1, 0)
+MX6_PAD_DECL(CSI0_DAT17__GPIO6_IO03,	0x037C, 0x0068, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__ARM_TRACE14,	0x037C, 0x0068, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__IPU1_CSI0_DATA18,	0x0380, 0x006C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__EIM_DATA14,	0x0380, 0x006C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__UART5_CTS_B,	0x0380, 0x006C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__UART5_RTS_B,	0x0380, 0x006C, 3, 0x0918, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__GPIO6_IO04,	0x0380, 0x006C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__ARM_TRACE15,	0x0380, 0x006C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT19__IPU1_CSI0_DATA19,	0x0384, 0x0070, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT19__EIM_DATA15,	0x0384, 0x0070, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT19__UART5_CTS_B,	0x0384, 0x0070, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT19__UART5_RTS_B,	0x0384, 0x0070, 3, 0x0918, 1, 0)
+MX6_PAD_DECL(CSI0_DAT19__GPIO6_IO05,	0x0384, 0x0070, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__IPU1_CSI0_DATA04,	0x0388, 0x0074, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__EIM_DATA02,	0x0388, 0x0074, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__ECSPI1_SCLK,	0x0388, 0x0074, 2, 0x07D8, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__KEY_COL5,	0x0388, 0x0074, 3, 0x08C0, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__AUD3_TXC,	0x0388, 0x0074, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__GPIO5_IO22,	0x0388, 0x0074, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__ARM_TRACE01,	0x0388, 0x0074, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__IPU1_CSI0_DATA05,	0x038C, 0x0078, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__EIM_DATA03,	0x038C, 0x0078, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__ECSPI1_MOSI,	0x038C, 0x0078, 2, 0x07E0, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__KEY_ROW5,	0x038C, 0x0078, 3, 0x08CC, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__AUD3_TXD,	0x038C, 0x0078, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__GPIO5_IO23,	0x038C, 0x0078, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__ARM_TRACE02,	0x038C, 0x0078, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__IPU1_CSI0_DATA06,	0x0390, 0x007C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__EIM_DATA04,	0x0390, 0x007C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__ECSPI1_MISO,	0x0390, 0x007C, 2, 0x07DC, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__KEY_COL6,	0x0390, 0x007C, 3, 0x08C4, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__AUD3_TXFS,	0x0390, 0x007C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__GPIO5_IO24,	0x0390, 0x007C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__ARM_TRACE03,	0x0390, 0x007C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__IPU1_CSI0_DATA07,	0x0394, 0x0080, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__EIM_DATA05,	0x0394, 0x0080, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__ECSPI1_SS0,	0x0394, 0x0080, 2, 0x07E4, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__KEY_ROW6,	0x0394, 0x0080, 3, 0x08D0, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__AUD3_RXD,	0x0394, 0x0080, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__GPIO5_IO25,	0x0394, 0x0080, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__ARM_TRACE04,	0x0394, 0x0080, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__IPU1_CSI0_DATA08,	0x0398, 0x0084, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__EIM_DATA06,	0x0398, 0x0084, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__ECSPI2_SCLK,	0x0398, 0x0084, 2, 0x07F4, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__KEY_COL7,	0x0398, 0x0084, 3, 0x08C8, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__I2C1_SDA,	0x0398, 0x0084, 4 | IOMUX_CONFIG_SION, 0x086C, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__GPIO5_IO26,	0x0398, 0x0084, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__ARM_TRACE05,	0x0398, 0x0084, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__IPU1_CSI0_DATA09,	0x039C, 0x0088, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__EIM_DATA07,	0x039C, 0x0088, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__ECSPI2_MOSI,	0x039C, 0x0088, 2, 0x07FC, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__KEY_ROW7,	0x039C, 0x0088, 3, 0x08D4, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__I2C1_SCL,	0x039C, 0x0088, 4 | IOMUX_CONFIG_SION, 0x0868, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__GPIO5_IO27,	0x039C, 0x0088, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__ARM_TRACE06,	0x039C, 0x0088, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DATA_EN__IPU1_CSI0_DATA_EN,	0x03A0, 0x008C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DATA_EN__EIM_DATA00,	0x03A0, 0x008C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DATA_EN__GPIO5_IO20,	0x03A0, 0x008C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DATA_EN__ARM_TRACE_CLK,	0x03A0, 0x008C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_MCLK__IPU1_CSI0_HSYNC,	0x03A4, 0x0090, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_MCLK__CCM_CLKO1,	0x03A4, 0x0090, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_MCLK__GPIO5_IO19,	0x03A4, 0x0090, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_MCLK__ARM_TRACE_CTL,	0x03A4, 0x0090, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_PIXCLK__IPU1_CSI0_PIXCLK,	0x03A8, 0x0094, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_PIXCLK__GPIO5_IO18,	0x03A8, 0x0094, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_PIXCLK__ARM_EVENTO,	0x03A8, 0x0094, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_VSYNC__IPU1_CSI0_VSYNC,	0x03AC, 0x0098, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_VSYNC__EIM_DATA01,	0x03AC, 0x0098, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_VSYNC__GPIO5_IO21,	0x03AC, 0x0098, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_VSYNC__ARM_TRACE00,	0x03AC, 0x0098, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_DISP_CLK__IPU1_DI0_DISP_CLK,	0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_DISP_CLK__LCD_CLK,	0x03B0, 0x009C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_DISP_CLK__GPIO4_IO16,	0x03B0, 0x009C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_DISP_CLK__LCD_WR_RWN,	0x03B0, 0x009C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN15__IPU1_DI0_PIN15,	0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_PIN15__LCD_ENABLE,	0x03B4, 0x00A0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN15__AUD6_TXC,	0x03B4, 0x00A0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN15__GPIO4_IO17,	0x03B4, 0x00A0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN15__LCD_RD_E,	0x03B4, 0x00A0, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN2__IPU1_DI0_PIN02,	0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_PIN2__LCD_HSYNC,	0x03B8, 0x00A4, 1, 0x08D8, 0, 0)
+MX6_PAD_DECL(DI0_PIN2__AUD6_TXD,	0x03B8, 0x00A4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN2__GPIO4_IO18,	0x03B8, 0x00A4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN2__LCD_RS,	0x03B8, 0x00A4, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN3__IPU1_DI0_PIN03,	0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_PIN3__LCD_VSYNC,	0x03BC, 0x00A8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN3__AUD6_TXFS,	0x03BC, 0x00A8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN3__GPIO4_IO19,	0x03BC, 0x00A8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN3__LCD_CS,	0x03BC, 0x00A8, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__IPU1_DI0_PIN04,	0x03C0, 0x00AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_PIN4__LCD_BUSY,	0x03C0, 0x00AC, 1, 0x08D8, 1, 0)
+MX6_PAD_DECL(DI0_PIN4__AUD6_RXD,	0x03C0, 0x00AC, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__SD1_WP,	0x03C0, 0x00AC, 3, 0x092C, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__GPIO4_IO20,	0x03C0, 0x00AC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__LCD_RESET,	0x03C0, 0x00AC, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT0__IPU1_DISP0_DATA00,	0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT0__LCD_DATA00,	0x03C4, 0x00B0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT0__ECSPI3_SCLK,	0x03C4, 0x00B0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT0__GPIO4_IO21,	0x03C4, 0x00B0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT1__IPU1_DISP0_DATA01,	0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT1__LCD_DATA01,	0x03C8, 0x00B4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT1__ECSPI3_MOSI,	0x03C8, 0x00B4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT1__GPIO4_IO22,	0x03C8, 0x00B4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT10__IPU1_DISP0_DATA10,	0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT10__LCD_DATA10,	0x03CC, 0x00B8, 1, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT10__GPIO4_IO31,	0x03CC, 0x00B8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT11__IPU1_DISP0_DATA11,	0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT11__LCD_DATA11,	0x03D0, 0x00BC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT11__GPIO5_IO05,	0x03D0, 0x00BC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT12__IPU1_DISP0_DATA12,	0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT12__LCD_DATA12,	0x03D4, 0x00C0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT12__GPIO5_IO06,	0x03D4, 0x00C0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT13__IPU1_DISP0_DATA13,	0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT13__LCD_DATA13,	0x03D8, 0x00C4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT13__AUD5_RXFS,	0x03D8, 0x00C4, 3, 0x07BC, 0, 0)
+MX6_PAD_DECL(DISP0_DAT13__GPIO5_IO07,	0x03D8, 0x00C4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT14__IPU1_DISP0_DATA14,	0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT14__LCD_DATA14,	0x03DC, 0x00C8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT14__AUD5_RXC,	0x03DC, 0x00C8, 3, 0x07B8, 0, 0)
+MX6_PAD_DECL(DISP0_DAT14__GPIO5_IO08,	0x03DC, 0x00C8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT15__IPU1_DISP0_DATA15,	0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT15__LCD_DATA15,	0x03E0, 0x00CC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT15__ECSPI1_SS1,	0x03E0, 0x00CC, 2, 0x07E8, 0, 0)
+MX6_PAD_DECL(DISP0_DAT15__ECSPI2_SS1,	0x03E0, 0x00CC, 3, 0x0804, 0, 0)
+MX6_PAD_DECL(DISP0_DAT15__GPIO5_IO09,	0x03E0, 0x00CC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT16__IPU1_DISP0_DATA16,	0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT16__LCD_DATA16,	0x03E4, 0x00D0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT16__ECSPI2_MOSI,	0x03E4, 0x00D0, 2, 0x07FC, 1, 0)
+MX6_PAD_DECL(DISP0_DAT16__AUD5_TXC,	0x03E4, 0x00D0, 3, 0x07C0, 0, 0)
+MX6_PAD_DECL(DISP0_DAT16__SDMA_EXT_EVENT0,	0x03E4, 0x00D0, 4, 0x08E8, 0, 0)
+MX6_PAD_DECL(DISP0_DAT16__GPIO5_IO10,	0x03E4, 0x00D0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT17__IPU1_DISP0_DATA17,	0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT17__LCD_DATA17,	0x03E8, 0x00D4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT17__ECSPI2_MISO,	0x03E8, 0x00D4, 2, 0x07F8, 1, 0)
+MX6_PAD_DECL(DISP0_DAT17__AUD5_TXD,	0x03E8, 0x00D4, 3, 0x07B4, 0, 0)
+MX6_PAD_DECL(DISP0_DAT17__SDMA_EXT_EVENT1,	0x03E8, 0x00D4, 4, 0x08EC, 0, 0)
+MX6_PAD_DECL(DISP0_DAT17__GPIO5_IO11,	0x03E8, 0x00D4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__IPU1_DISP0_DATA18,	0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT18__LCD_DATA18,	0x03EC, 0x00D8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__ECSPI2_SS0,	0x03EC, 0x00D8, 2, 0x0800, 1, 0)
+MX6_PAD_DECL(DISP0_DAT18__AUD5_TXFS,	0x03EC, 0x00D8, 3, 0x07C4, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__AUD4_RXFS,	0x03EC, 0x00D8, 4, 0x07A4, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__GPIO5_IO12,	0x03EC, 0x00D8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__EIM_CS2_B,	0x03EC, 0x00D8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__IPU1_DISP0_DATA19,	0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT19__LCD_DATA19,	0x03F0, 0x00DC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__ECSPI2_SCLK,	0x03F0, 0x00DC, 2, 0x07F4, 1, 0)
+MX6_PAD_DECL(DISP0_DAT19__AUD5_RXD,	0x03F0, 0x00DC, 3, 0x07B0, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__AUD4_RXC,	0x03F0, 0x00DC, 4, 0x07A0, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__GPIO5_IO13,	0x03F0, 0x00DC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__EIM_CS3_B,	0x03F0, 0x00DC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT2__IPU1_DISP0_DATA02,	0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT2__LCD_DATA02,	0x03F4, 0x00E0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT2__ECSPI3_MISO,	0x03F4, 0x00E0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT2__GPIO4_IO23,	0x03F4, 0x00E0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT20__IPU1_DISP0_DATA20,	0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT20__LCD_DATA20,	0x03F8, 0x00E4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT20__ECSPI1_SCLK,	0x03F8, 0x00E4, 2, 0x07D8, 1, 0)
+MX6_PAD_DECL(DISP0_DAT20__AUD4_TXC,	0x03F8, 0x00E4, 3, 0x07A8, 0, 0)
+MX6_PAD_DECL(DISP0_DAT20__GPIO5_IO14,	0x03F8, 0x00E4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT21__IPU1_DISP0_DATA21,	0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT21__LCD_DATA21,	0x03FC, 0x00E8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT21__ECSPI1_MOSI,	0x03FC, 0x00E8, 2, 0x07E0, 1, 0)
+MX6_PAD_DECL(DISP0_DAT21__AUD4_TXD,	0x03FC, 0x00E8, 3, 0x079C, 0, 0)
+MX6_PAD_DECL(DISP0_DAT21__GPIO5_IO15,	0x03FC, 0x00E8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT22__IPU1_DISP0_DATA22,	0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT22__LCD_DATA22,	0x0400, 0x00EC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT22__ECSPI1_MISO,	0x0400, 0x00EC, 2, 0x07DC, 1, 0)
+MX6_PAD_DECL(DISP0_DAT22__AUD4_TXFS,	0x0400, 0x00EC, 3, 0x07AC, 0, 0)
+MX6_PAD_DECL(DISP0_DAT22__GPIO5_IO16,	0x0400, 0x00EC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT23__IPU1_DISP0_DATA23,	0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT23__LCD_DATA23,	0x0404, 0x00F0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT23__ECSPI1_SS0,	0x0404, 0x00F0, 2, 0x07E4, 1, 0)
+MX6_PAD_DECL(DISP0_DAT23__AUD4_RXD,	0x0404, 0x00F0, 3, 0x0798, 0, 0)
+MX6_PAD_DECL(DISP0_DAT23__GPIO5_IO17,	0x0404, 0x00F0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT3__IPU1_DISP0_DATA03,	0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT3__LCD_DATA03,	0x0408, 0x00F4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT3__ECSPI3_SS0,	0x0408, 0x00F4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT3__GPIO4_IO24,	0x0408, 0x00F4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT4__IPU1_DISP0_DATA04,	0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT4__LCD_DATA04,	0x040C, 0x00F8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT4__ECSPI3_SS1,	0x040C, 0x00F8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT4__GPIO4_IO25,	0x040C, 0x00F8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT5__IPU1_DISP0_DATA05,	0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT5__LCD_DATA05,	0x0410, 0x00FC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT5__ECSPI3_SS2,	0x0410, 0x00FC, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT5__AUD6_RXFS,	0x0410, 0x00FC, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT5__GPIO4_IO26,	0x0410, 0x00FC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT6__IPU1_DISP0_DATA06,	0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT6__LCD_DATA06,	0x0414, 0x0100, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT6__ECSPI3_SS3,	0x0414, 0x0100, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT6__AUD6_RXC,	0x0414, 0x0100, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT6__GPIO4_IO27,	0x0414, 0x0100, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT7__IPU1_DISP0_DATA07,	0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT7__LCD_DATA07,	0x0418, 0x0104, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT7__ECSPI3_RDY,	0x0418, 0x0104, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT7__GPIO4_IO28,	0x0418, 0x0104, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT8__IPU1_DISP0_DATA08,	0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT8__LCD_DATA08,	0x041C, 0x0108, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT8__PWM1_OUT,	0x041C, 0x0108, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT8__WDOG1_B,	0x041C, 0x0108, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT8__GPIO4_IO29,	0x041C, 0x0108, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT9__IPU1_DISP0_DATA09,	0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT9__LCD_DATA09,	0x0420, 0x010C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT9__PWM2_OUT,	0x0420, 0x010C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT9__WDOG2_B,	0x0420, 0x010C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT9__GPIO4_IO30,	0x0420, 0x010C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__EIM_ADDR16,	0x04E0, 0x0110, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__IPU1_DI1_DISP_CLK,	0x04E0, 0x0110, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__IPU1_CSI1_PIXCLK,	0x04E0, 0x0110, 2, 0x08B8, 0, 0)
+MX6_PAD_DECL(EIM_A16__GPIO2_IO22,	0x04E0, 0x0110, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__SRC_BOOT_CFG16,	0x04E0, 0x0110, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__EPDC_DATA00,	0x04E0, 0x0110, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__EIM_ADDR17,	0x04E4, 0x0114, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__IPU1_DISP1_DATA12,	0x04E4, 0x0114, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__IPU1_CSI1_DATA12,	0x04E4, 0x0114, 2, 0x0890, 0, 0)
+MX6_PAD_DECL(EIM_A17__GPIO2_IO21,	0x04E4, 0x0114, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__SRC_BOOT_CFG17,	0x04E4, 0x0114, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__EPDC_PWR_STAT,	0x04E4, 0x0114, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__EIM_ADDR18,	0x04E8, 0x0118, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__IPU1_DISP1_DATA13,	0x04E8, 0x0118, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__IPU1_CSI1_DATA13,	0x04E8, 0x0118, 2, 0x0894, 0, 0)
+MX6_PAD_DECL(EIM_A18__GPIO2_IO20,	0x04E8, 0x0118, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__SRC_BOOT_CFG18,	0x04E8, 0x0118, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__EPDC_PWR_CTRL0,	0x04E8, 0x0118, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__EIM_ADDR19,	0x04EC, 0x011C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__IPU1_DISP1_DATA14,	0x04EC, 0x011C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__IPU1_CSI1_DATA14,	0x04EC, 0x011C, 2, 0x0898, 0, 0)
+MX6_PAD_DECL(EIM_A19__GPIO2_IO19,	0x04EC, 0x011C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__SRC_BOOT_CFG19,	0x04EC, 0x011C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__EPDC_PWR_CTRL1,	0x04EC, 0x011C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__EIM_ADDR20,	0x04F0, 0x0120, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__IPU1_DISP1_DATA15,	0x04F0, 0x0120, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__IPU1_CSI1_DATA15,	0x04F0, 0x0120, 2, 0x089C, 0, 0)
+MX6_PAD_DECL(EIM_A20__GPIO2_IO18,	0x04F0, 0x0120, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__SRC_BOOT_CFG20,	0x04F0, 0x0120, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__EPDC_PWR_CTRL2,	0x04F0, 0x0120, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__EIM_ADDR21,	0x04F4, 0x0124, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__IPU1_DISP1_DATA16,	0x04F4, 0x0124, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__IPU1_CSI1_DATA16,	0x04F4, 0x0124, 2, 0x08A0, 0, 0)
+MX6_PAD_DECL(EIM_A21__GPIO2_IO17,	0x04F4, 0x0124, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__SRC_BOOT_CFG21,	0x04F4, 0x0124, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__EPDC_GDCLK,	0x04F4, 0x0124, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__EIM_ADDR22,	0x04F8, 0x0128, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__IPU1_DISP1_DATA17,	0x04F8, 0x0128, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__IPU1_CSI1_DATA17,	0x04F8, 0x0128, 2, 0x08A4, 0, 0)
+MX6_PAD_DECL(EIM_A22__GPIO2_IO16,	0x04F8, 0x0128, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__SRC_BOOT_CFG22,	0x04F8, 0x0128, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__EPDC_GDSP,	0x04F8, 0x0128, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__EIM_ADDR23,	0x04FC, 0x012C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__IPU1_DISP1_DATA18,	0x04FC, 0x012C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__IPU1_CSI1_DATA18,	0x04FC, 0x012C, 2, 0x08A8, 0, 0)
+MX6_PAD_DECL(EIM_A23__IPU1_SISG3,	0x04FC, 0x012C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__GPIO6_IO06,	0x04FC, 0x012C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__SRC_BOOT_CFG23,	0x04FC, 0x012C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__EPDC_GDOE,	0x04FC, 0x012C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__EIM_ADDR24,	0x0500, 0x0130, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__IPU1_DISP1_DATA19,	0x0500, 0x0130, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__IPU1_CSI1_DATA19,	0x0500, 0x0130, 2, 0x08AC, 0, 0)
+MX6_PAD_DECL(EIM_A24__IPU1_SISG2,	0x0500, 0x0130, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__GPIO5_IO04,	0x0500, 0x0130, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__SRC_BOOT_CFG24,	0x0500, 0x0130, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__EPDC_GDRL,	0x0500, 0x0130, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__EIM_ADDR25,	0x0504, 0x0134, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__ECSPI4_SS1,	0x0504, 0x0134, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__ECSPI2_RDY,	0x0504, 0x0134, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__IPU1_DI1_PIN12,	0x0504, 0x0134, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__IPU1_DI0_D1_CS,	0x0504, 0x0134, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__GPIO5_IO02,	0x0504, 0x0134, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__HDMI_TX_CEC_LINE,	0x0504, 0x0134, 6, 0x085C, 0, 0)
+MX6_PAD_DECL(EIM_A25__EPDC_DATA15,	0x0504, 0x0134, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__EIM_ACLK_FREERUN,	0x0504, 0x0134, 9, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_BCLK__EIM_BCLK,	0x0508, 0x0138, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_BCLK__IPU1_DI1_PIN16,	0x0508, 0x0138, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_BCLK__GPIO6_IO31,	0x0508, 0x0138, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_BCLK__EPDC_SDCE9,	0x0508, 0x0138, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS0__EIM_CS0_B,	0x050C, 0x013C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS0__IPU1_DI1_PIN05,	0x050C, 0x013C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS0__ECSPI2_SCLK,	0x050C, 0x013C, 2, 0x07F4, 2, 0)
+MX6_PAD_DECL(EIM_CS0__GPIO2_IO23,	0x050C, 0x013C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS0__EPDC_DATA06,	0x050C, 0x013C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS1__EIM_CS1_B,	0x0510, 0x0140, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS1__IPU1_DI1_PIN06,	0x0510, 0x0140, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS1__ECSPI2_MOSI,	0x0510, 0x0140, 2, 0x07FC, 2, 0)
+MX6_PAD_DECL(EIM_CS1__GPIO2_IO24,	0x0510, 0x0140, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS1__EPDC_DATA08,	0x0510, 0x0140, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D16__EIM_DATA16,	0x0514, 0x0144, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D16__ECSPI1_SCLK,	0x0514, 0x0144, 1, 0x07D8, 2, 0)
+MX6_PAD_DECL(EIM_D16__IPU1_DI0_PIN05,	0x0514, 0x0144, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D16__IPU1_CSI1_DATA18,	0x0514, 0x0144, 3, 0x08A8, 1, 0)
+MX6_PAD_DECL(EIM_D16__HDMI_TX_DDC_SDA,	0x0514, 0x0144, 4, 0x0864, 0, 0)
+MX6_PAD_DECL(EIM_D16__GPIO3_IO16,	0x0514, 0x0144, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D16__I2C2_SDA,	0x0514, 0x0144, 6 | IOMUX_CONFIG_SION, 0x0874, 0, 0)
+MX6_PAD_DECL(EIM_D16__EPDC_DATA10,	0x0514, 0x0144, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__EIM_DATA17,	0x0518, 0x0148, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__ECSPI1_MISO,	0x0518, 0x0148, 1, 0x07DC, 2, 0)
+MX6_PAD_DECL(EIM_D17__IPU1_DI0_PIN06,	0x0518, 0x0148, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__IPU1_CSI1_PIXCLK,	0x0518, 0x0148, 3, 0x08B8, 1, 0)
+MX6_PAD_DECL(EIM_D17__DCIC1_OUT,	0x0518, 0x0148, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__GPIO3_IO17,	0x0518, 0x0148, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__I2C3_SCL,	0x0518, 0x0148, 6 | IOMUX_CONFIG_SION, 0x0878, 0, 0)
+MX6_PAD_DECL(EIM_D17__EPDC_VCOM0,	0x0518, 0x0148, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__EIM_DATA18,	0x051C, 0x014C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__ECSPI1_MOSI,	0x051C, 0x014C, 1, 0x07E0, 2, 0)
+MX6_PAD_DECL(EIM_D18__IPU1_DI0_PIN07,	0x051C, 0x014C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__IPU1_CSI1_DATA17,	0x051C, 0x014C, 3, 0x08A4, 1, 0)
+MX6_PAD_DECL(EIM_D18__IPU1_DI1_D0_CS,	0x051C, 0x014C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__GPIO3_IO18,	0x051C, 0x014C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__I2C3_SDA,	0x051C, 0x014C, 6 | IOMUX_CONFIG_SION, 0x087C, 0, 0)
+MX6_PAD_DECL(EIM_D18__EPDC_VCOM1,	0x051C, 0x014C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__EIM_DATA19,	0x0520, 0x0150, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__ECSPI1_SS1,	0x0520, 0x0150, 1, 0x07E8, 1, 0)
+MX6_PAD_DECL(EIM_D19__IPU1_DI0_PIN08,	0x0520, 0x0150, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__IPU1_CSI1_DATA16,	0x0520, 0x0150, 3, 0x08A0, 1, 0)
+MX6_PAD_DECL(EIM_D19__UART1_CTS_B,	0x0520, 0x0150, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__UART1_RTS_B,	0x0520, 0x0150, 4, 0x08F8, 0, 0)
+MX6_PAD_DECL(EIM_D19__GPIO3_IO19,	0x0520, 0x0150, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__EPIT1_OUT,	0x0520, 0x0150, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__EPDC_DATA12,	0x0520, 0x0150, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__EIM_DATA20,	0x0524, 0x0154, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__ECSPI4_SS0,	0x0524, 0x0154, 1, 0x0808, 0, 0)
+MX6_PAD_DECL(EIM_D20__IPU1_DI0_PIN16,	0x0524, 0x0154, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__IPU1_CSI1_DATA15,	0x0524, 0x0154, 3, 0x089C, 1, 0)
+MX6_PAD_DECL(EIM_D20__UART1_CTS_B,	0x0524, 0x0154, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__UART1_RTS_B,	0x0524, 0x0154, 4, 0x08F8, 1, 0)
+MX6_PAD_DECL(EIM_D20__GPIO3_IO20,	0x0524, 0x0154, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__EPIT2_OUT,	0x0524, 0x0154, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__EIM_DATA21,	0x0528, 0x0158, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__ECSPI4_SCLK,	0x0528, 0x0158, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__IPU1_DI0_PIN17,	0x0528, 0x0158, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__IPU1_CSI1_DATA11,	0x0528, 0x0158, 3, 0x088C, 0, 0)
+MX6_PAD_DECL(EIM_D21__USB_OTG_OC,	0x0528, 0x0158, 4, 0x0920, 0, 0)
+MX6_PAD_DECL(EIM_D21__GPIO3_IO21,	0x0528, 0x0158, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__I2C1_SCL,	0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0)
+MX6_PAD_DECL(EIM_D21__SPDIF_IN,	0x0528, 0x0158, 7, 0x08F0, 0, 0)
+MX6_PAD_DECL(EIM_D22__EIM_DATA22,	0x052C, 0x015C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__ECSPI4_MISO,	0x052C, 0x015C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__IPU1_DI0_PIN01,	0x052C, 0x015C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__IPU1_CSI1_DATA10,	0x052C, 0x015C, 3, 0x0888, 0, 0)
+MX6_PAD_DECL(EIM_D22__USB_OTG_PWR,	0x052C, 0x015C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__GPIO3_IO22,	0x052C, 0x015C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__SPDIF_OUT,	0x052C, 0x015C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__EPDC_SDCE6,	0x052C, 0x015C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__EIM_DATA23,	0x0530, 0x0160, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__IPU1_DI0_D0_CS,	0x0530, 0x0160, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__UART3_CTS_B,	0x0530, 0x0160, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__UART3_RTS_B,	0x0530, 0x0160, 2, 0x0908, 0, 0)
+MX6_PAD_DECL(EIM_D23__UART1_DCD_B,	0x0530, 0x0160, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__IPU1_CSI1_DATA_EN,	0x0530, 0x0160, 4, 0x08B0, 0, 0)
+MX6_PAD_DECL(EIM_D23__GPIO3_IO23,	0x0530, 0x0160, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__IPU1_DI1_PIN02,	0x0530, 0x0160, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__IPU1_DI1_PIN14,	0x0530, 0x0160, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__EPDC_DATA11,	0x0530, 0x0160, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__EIM_DATA24,	0x0534, 0x0164, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__ECSPI4_SS2,	0x0534, 0x0164, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__UART3_TX_DATA,	0x0534, 0x0164, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__UART3_RX_DATA,	0x0534, 0x0164, 2, 0x090C, 0, 0)
+MX6_PAD_DECL(EIM_D24__ECSPI1_SS2,	0x0534, 0x0164, 3, 0x07EC, 0, 0)
+MX6_PAD_DECL(EIM_D24__ECSPI2_SS2,	0x0534, 0x0164, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__GPIO3_IO24,	0x0534, 0x0164, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__AUD5_RXFS,	0x0534, 0x0164, 6, 0x07BC, 1, 0)
+MX6_PAD_DECL(EIM_D24__UART1_DTR_B,	0x0534, 0x0164, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__EPDC_SDCE7,	0x0534, 0x0164, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__EIM_DATA25,	0x0538, 0x0168, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__ECSPI4_SS3,	0x0538, 0x0168, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__UART3_TX_DATA,	0x0538, 0x0168, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__UART3_RX_DATA,	0x0538, 0x0168, 2, 0x090C, 1, 0)
+MX6_PAD_DECL(EIM_D25__ECSPI1_SS3,	0x0538, 0x0168, 3, 0x07F0, 0, 0)
+MX6_PAD_DECL(EIM_D25__ECSPI2_SS3,	0x0538, 0x0168, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__GPIO3_IO25,	0x0538, 0x0168, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__AUD5_RXC,	0x0538, 0x0168, 6, 0x07B8, 1, 0)
+MX6_PAD_DECL(EIM_D25__UART1_DSR_B,	0x0538, 0x0168, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__EPDC_SDCE8,	0x0538, 0x0168, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__EIM_DATA26,	0x053C, 0x016C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_DI1_PIN11,	0x053C, 0x016C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_CSI0_DATA01,	0x053C, 0x016C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_CSI1_DATA14,	0x053C, 0x016C, 3, 0x0898, 1, 0)
+MX6_PAD_DECL(EIM_D26__UART2_TX_DATA,	0x053C, 0x016C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__UART2_RX_DATA,	0x053C, 0x016C, 4, 0x0904, 0, 0)
+MX6_PAD_DECL(EIM_D26__GPIO3_IO26,	0x053C, 0x016C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_SISG2,	0x053C, 0x016C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_DISP1_DATA22,	0x053C, 0x016C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__EPDC_SDOED,	0x053C, 0x016C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__EIM_DATA27,	0x0540, 0x0170, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_DI1_PIN13,	0x0540, 0x0170, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_CSI0_DATA00,	0x0540, 0x0170, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_CSI1_DATA13,	0x0540, 0x0170, 3, 0x0894, 1, 0)
+MX6_PAD_DECL(EIM_D27__UART2_TX_DATA,	0x0540, 0x0170, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__UART2_RX_DATA,	0x0540, 0x0170, 4, 0x0904, 1, 0)
+MX6_PAD_DECL(EIM_D27__GPIO3_IO27,	0x0540, 0x0170, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_SISG3,	0x0540, 0x0170, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_DISP1_DATA23,	0x0540, 0x0170, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__EPDC_SDOE,	0x0540, 0x0170, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__EIM_DATA28,	0x0544, 0x0174, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__I2C1_SDA,	0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0)
+MX6_PAD_DECL(EIM_D28__ECSPI4_MOSI,	0x0544, 0x0174, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__IPU1_CSI1_DATA12,	0x0544, 0x0174, 3, 0x0890, 1, 0)
+MX6_PAD_DECL(EIM_D28__UART2_DTE_RTS_B,	0x0544, 0x0174, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__UART2_DTE_CTS_B,	0x0544, 0x0174, 4, 0x0900, 0, 0)
+MX6_PAD_DECL(EIM_D28__GPIO3_IO28,	0x0544, 0x0174, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__IPU1_EXT_TRIG,	0x0544, 0x0174, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__IPU1_DI0_PIN13,	0x0544, 0x0174, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__EPDC_PWR_CTRL3,	0x0544, 0x0174, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__EIM_DATA29,	0x0548, 0x0178, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__IPU1_DI1_PIN15,	0x0548, 0x0178, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__ECSPI4_SS0,	0x0548, 0x0178, 2, 0x0808, 1, 0)
+MX6_PAD_DECL(EIM_D29__UART2_CTS_B,	0x0548, 0x0178, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__UART2_RTS_B,	0x0548, 0x0178, 4, 0x0900, 1, 0)
+MX6_PAD_DECL(EIM_D29__GPIO3_IO29,	0x0548, 0x0178, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__IPU1_CSI1_VSYNC,	0x0548, 0x0178, 6, 0x08BC, 0, 0)
+MX6_PAD_DECL(EIM_D29__IPU1_DI0_PIN14,	0x0548, 0x0178, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__EPDC_PWR_WAKE,	0x0548, 0x0178, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__EIM_DATA30,	0x054C, 0x017C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__IPU1_DISP1_DATA21,	0x054C, 0x017C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__IPU1_DI0_PIN11,	0x054C, 0x017C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__IPU1_CSI0_DATA03,	0x054C, 0x017C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__UART3_CTS_B,	0x054C, 0x017C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__UART3_RTS_B,	0x054C, 0x017C, 4, 0x0908, 1, 0)
+MX6_PAD_DECL(EIM_D30__GPIO3_IO30,	0x054C, 0x017C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__USB_H1_OC,	0x054C, 0x017C, 6, 0x0924, 0, 0)
+MX6_PAD_DECL(EIM_D30__EPDC_SDOEZ,	0x054C, 0x017C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__EIM_DATA31,	0x0550, 0x0180, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__IPU1_DISP1_DATA20,	0x0550, 0x0180, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__IPU1_DI0_PIN12,	0x0550, 0x0180, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__IPU1_CSI0_DATA02,	0x0550, 0x0180, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__UART3_CTS_B,	0x0550, 0x0180, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__UART3_RTS_B,	0x0550, 0x0180, 4, 0x0908, 2, 0)
+MX6_PAD_DECL(EIM_D31__GPIO3_IO31,	0x0550, 0x0180, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__USB_H1_PWR,	0x0550, 0x0180, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__EPDC_SDCLK_P,	0x0550, 0x0180, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__EIM_ACLK_FREERUN,	0x0550, 0x0180, 9, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__EIM_AD00,	0x0554, 0x0184, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__IPU1_DISP1_DATA09,	0x0554, 0x0184, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__IPU1_CSI1_DATA09,	0x0554, 0x0184, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__GPIO3_IO00,	0x0554, 0x0184, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__SRC_BOOT_CFG00,	0x0554, 0x0184, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__EPDC_SDCLK_N,	0x0554, 0x0184, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__EIM_AD01,	0x0558, 0x0188, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__IPU1_DISP1_DATA08,	0x0558, 0x0188, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__IPU1_CSI1_DATA08,	0x0558, 0x0188, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__GPIO3_IO01,	0x0558, 0x0188, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__SRC_BOOT_CFG01,	0x0558, 0x0188, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__EPDC_SDLE,	0x0558, 0x0188, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__EIM_AD10,	0x055C, 0x018C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__IPU1_DI1_PIN15,	0x055C, 0x018C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__IPU1_CSI1_DATA_EN,	0x055C, 0x018C, 2, 0x08B0, 1, 0)
+MX6_PAD_DECL(EIM_DA10__GPIO3_IO10,	0x055C, 0x018C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__SRC_BOOT_CFG10,	0x055C, 0x018C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__EPDC_DATA01,	0x055C, 0x018C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__EIM_AD11,	0x0560, 0x0190, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__IPU1_DI1_PIN02,	0x0560, 0x0190, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__IPU1_CSI1_HSYNC,	0x0560, 0x0190, 2, 0x08B4, 0, 0)
+MX6_PAD_DECL(EIM_DA11__GPIO3_IO11,	0x0560, 0x0190, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__SRC_BOOT_CFG11,	0x0560, 0x0190, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__EPDC_DATA03,	0x0560, 0x0190, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__EIM_AD12,	0x0564, 0x0194, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__IPU1_DI1_PIN03,	0x0564, 0x0194, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__IPU1_CSI1_VSYNC,	0x0564, 0x0194, 2, 0x08BC, 1, 0)
+MX6_PAD_DECL(EIM_DA12__GPIO3_IO12,	0x0564, 0x0194, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__SRC_BOOT_CFG12,	0x0564, 0x0194, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__EPDC_DATA02,	0x0564, 0x0194, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__EIM_AD13,	0x0568, 0x0198, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__IPU1_DI1_D0_CS,	0x0568, 0x0198, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__GPIO3_IO13,	0x0568, 0x0198, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__SRC_BOOT_CFG13,	0x0568, 0x0198, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__EPDC_DATA13,	0x0568, 0x0198, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__EIM_AD14,	0x056C, 0x019C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__IPU1_DI1_D1_CS,	0x056C, 0x019C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__GPIO3_IO14,	0x056C, 0x019C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__SRC_BOOT_CFG14,	0x056C, 0x019C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__EPDC_DATA14,	0x056C, 0x019C, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__EIM_AD15,	0x0570, 0x01A0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__IPU1_DI1_PIN01,	0x0570, 0x01A0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__IPU1_DI1_PIN04,	0x0570, 0x01A0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__GPIO3_IO15,	0x0570, 0x01A0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__SRC_BOOT_CFG15,	0x0570, 0x01A0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__EPDC_DATA09,	0x0570, 0x01A0, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__EIM_AD02,	0x0574, 0x01A4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__IPU1_DISP1_DATA07,	0x0574, 0x01A4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__IPU1_CSI1_DATA07,	0x0574, 0x01A4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__GPIO3_IO02,	0x0574, 0x01A4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__SRC_BOOT_CFG02,	0x0574, 0x01A4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__EPDC_BDR0,	0x0574, 0x01A4, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__EIM_AD03,	0x0578, 0x01A8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__IPU1_DISP1_DATA06,	0x0578, 0x01A8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__IPU1_CSI1_DATA06,	0x0578, 0x01A8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__GPIO3_IO03,	0x0578, 0x01A8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__SRC_BOOT_CFG03,	0x0578, 0x01A8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__EPDC_BDR1,	0x0578, 0x01A8, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__EIM_AD04,	0x057C, 0x01AC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__IPU1_DISP1_DATA05,	0x057C, 0x01AC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__IPU1_CSI1_DATA05,	0x057C, 0x01AC, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__GPIO3_IO04,	0x057C, 0x01AC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__SRC_BOOT_CFG04,	0x057C, 0x01AC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__EPDC_SDCE0,	0x057C, 0x01AC, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__EIM_AD05,	0x0580, 0x01B0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__IPU1_DISP1_DATA04,	0x0580, 0x01B0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__IPU1_CSI1_DATA04,	0x0580, 0x01B0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__GPIO3_IO05,	0x0580, 0x01B0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__SRC_BOOT_CFG05,	0x0580, 0x01B0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__EPDC_SDCE1,	0x0580, 0x01B0, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__EIM_AD06,	0x0584, 0x01B4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__IPU1_DISP1_DATA03,	0x0584, 0x01B4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__IPU1_CSI1_DATA03,	0x0584, 0x01B4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__GPIO3_IO06,	0x0584, 0x01B4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__SRC_BOOT_CFG06,	0x0584, 0x01B4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__EPDC_SDCE2,	0x0584, 0x01B4, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__EIM_AD07,	0x0588, 0x01B8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__IPU1_DISP1_DATA02,	0x0588, 0x01B8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__IPU1_CSI1_DATA02,	0x0588, 0x01B8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__GPIO3_IO07,	0x0588, 0x01B8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__SRC_BOOT_CFG07,	0x0588, 0x01B8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__EPDC_SDCE3,	0x0588, 0x01B8, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__EIM_AD08,	0x058C, 0x01BC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__IPU1_DISP1_DATA01,	0x058C, 0x01BC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__IPU1_CSI1_DATA01,	0x058C, 0x01BC, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__GPIO3_IO08,	0x058C, 0x01BC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__SRC_BOOT_CFG08,	0x058C, 0x01BC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__EPDC_SDCE4,	0x058C, 0x01BC, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__EIM_AD09,	0x0590, 0x01C0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__IPU1_DISP1_DATA00,	0x0590, 0x01C0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__IPU1_CSI1_DATA00,	0x0590, 0x01C0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__GPIO3_IO09,	0x0590, 0x01C0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__SRC_BOOT_CFG09,	0x0590, 0x01C0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__EPDC_SDCE5,	0x0590, 0x01C0, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__EIM_EB0_B,	0x0594, 0x01C4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__IPU1_DISP1_DATA11,	0x0594, 0x01C4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__IPU1_CSI1_DATA11,	0x0594, 0x01C4, 2, 0x088C, 1, 0)
+MX6_PAD_DECL(EIM_EB0__CCM_PMIC_READY,	0x0594, 0x01C4, 4, 0x07D4, 0, 0)
+MX6_PAD_DECL(EIM_EB0__GPIO2_IO28,	0x0594, 0x01C4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__SRC_BOOT_CFG27,	0x0594, 0x01C4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__EPDC_PWR_COM,	0x0594, 0x01C4, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__EIM_EB1_B,	0x0598, 0x01C8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__IPU1_DISP1_DATA10,	0x0598, 0x01C8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__IPU1_CSI1_DATA10,	0x0598, 0x01C8, 2, 0x0888, 1, 0)
+MX6_PAD_DECL(EIM_EB1__GPIO2_IO29,	0x0598, 0x01C8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__SRC_BOOT_CFG28,	0x0598, 0x01C8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__EPDC_SDSHR,	0x0598, 0x01C8, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB2__EIM_EB2_B,	0x059C, 0x01CC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB2__ECSPI1_SS0,	0x059C, 0x01CC, 1, 0x07E4, 2, 0)
+MX6_PAD_DECL(EIM_EB2__IPU1_CSI1_DATA19,	0x059C, 0x01CC, 3, 0x08AC, 1, 0)
+MX6_PAD_DECL(EIM_EB2__HDMI_TX_DDC_SCL,	0x059C, 0x01CC, 4, 0x0860, 0, 0)
+MX6_PAD_DECL(EIM_EB2__GPIO2_IO30,	0x059C, 0x01CC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB2__I2C2_SCL,	0x059C, 0x01CC, 6 | IOMUX_CONFIG_SION, 0x0870, 0, 0)
+MX6_PAD_DECL(EIM_EB2__SRC_BOOT_CFG30,	0x059C, 0x01CC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB2__EPDC_DATA05,	0x059C, 0x01CC, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__EIM_EB3_B,	0x05A0, 0x01D0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__ECSPI4_RDY,	0x05A0, 0x01D0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__UART3_CTS_B,	0x05A0, 0x01D0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__UART3_RTS_B,	0x05A0, 0x01D0, 2, 0x0908, 3, 0)
+MX6_PAD_DECL(EIM_EB3__UART1_RI_B,	0x05A0, 0x01D0, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__IPU1_CSI1_HSYNC,	0x05A0, 0x01D0, 4, 0x08B4, 1, 0)
+MX6_PAD_DECL(EIM_EB3__GPIO2_IO31,	0x05A0, 0x01D0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__IPU1_DI1_PIN03,	0x05A0, 0x01D0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__SRC_BOOT_CFG31,	0x05A0, 0x01D0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__EPDC_SDCE0,	0x05A0, 0x01D0, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__EIM_ACLK_FREERUN,	0x05A0, 0x01D0, 9, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__EIM_LBA_B,	0x05A4, 0x01D4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__IPU1_DI1_PIN17,	0x05A4, 0x01D4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__ECSPI2_SS1,	0x05A4, 0x01D4, 2, 0x0804, 1, 0)
+MX6_PAD_DECL(EIM_LBA__GPIO2_IO27,	0x05A4, 0x01D4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__SRC_BOOT_CFG26,	0x05A4, 0x01D4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__EPDC_DATA04,	0x05A4, 0x01D4, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_OE__EIM_OE_B,	0x05A8, 0x01D8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_OE__IPU1_DI1_PIN07,	0x05A8, 0x01D8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_OE__ECSPI2_MISO,	0x05A8, 0x01D8, 2, 0x07F8, 2, 0)
+MX6_PAD_DECL(EIM_OE__GPIO2_IO25,	0x05A8, 0x01D8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_OE__EPDC_PWR_IRQ,	0x05A8, 0x01D8, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__EIM_RW,	0x05AC, 0x01DC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__IPU1_DI1_PIN08,	0x05AC, 0x01DC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__ECSPI2_SS0,	0x05AC, 0x01DC, 2, 0x0800, 2, 0)
+MX6_PAD_DECL(EIM_RW__GPIO2_IO26,	0x05AC, 0x01DC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__SRC_BOOT_CFG29,	0x05AC, 0x01DC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__EPDC_DATA07,	0x05AC, 0x01DC, 8, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_WAIT__EIM_WAIT_B,	0x05B0, 0x01E0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_WAIT__EIM_DTACK_B,	0x05B0, 0x01E0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_WAIT__GPIO5_IO00,	0x05B0, 0x01E0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_WAIT__SRC_BOOT_CFG25,	0x05B0, 0x01E0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_CRS_DV__ENET_RX_EN,	0x05B4, 0x01E4, 1, 0x0828, 0, 0)
+MX6_PAD_DECL(ENET_CRS_DV__ESAI_TX_CLK,	0x05B4, 0x01E4, 2, 0x0840, 0, 0)
+MX6_PAD_DECL(ENET_CRS_DV__SPDIF_EXT_CLK,	0x05B4, 0x01E4, 3, 0x08F4, 0, 0)
+MX6_PAD_DECL(ENET_CRS_DV__GPIO1_IO25,	0x05B4, 0x01E4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDC__MLB_DATA,	0x05B8, 0x01E8, 0, 0x08E0, 0, 0)
+MX6_PAD_DECL(ENET_MDC__ENET_MDC,	0x05B8, 0x01E8, 1, 0x0000, 0,  0)
+MX6_PAD_DECL(ENET_MDC__ESAI_TX5_RX0,	0x05B8, 0x01E8, 2, 0x0858, 0, 0)
+MX6_PAD_DECL(ENET_MDC__ENET_1588_EVENT1_IN,	0x05B8, 0x01E8, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDC__GPIO1_IO31,	0x05B8, 0x01E8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__ENET_MDIO,	0x05BC, 0x01EC, 1, 0x0810, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__ESAI_RX_CLK,	0x05BC, 0x01EC, 2, 0x083C, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__ENET_1588_EVENT1_OUT,	0x05BC, 0x01EC, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__GPIO1_IO22,	0x05BC, 0x01EC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__SPDIF_LOCK,	0x05BC, 0x01EC, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK,	0x05C0, 0x01F0, 1 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__ESAI_RX_FS,	0x05C0, 0x01F0, 2, 0x082C, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__GPIO1_IO23,	0x05C0, 0x01F0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__SPDIF_SR_CLK,	0x05C0, 0x01F0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__USB_OTG_ID,	0x05C4, 0x01F4, 0, 0x0790, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__ENET_RX_ER,	0x05C4, 0x01F4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__ESAI_RX_HF_CLK,	0x05C4, 0x01F4, 2, 0x0834, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__SPDIF_IN,	0x05C4, 0x01F4, 3, 0x08F0, 1, 0)
+MX6_PAD_DECL(ENET_RX_ER__ENET_1588_EVENT2_OUT,	0x05C4, 0x01F4, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__GPIO1_IO24,	0x05C4, 0x01F4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RXD0__ENET_RX_DATA0,	0x05C8, 0x01F8, 1, 0x0818, 0, 0)
+MX6_PAD_DECL(ENET_RXD0__ESAI_TX_HF_CLK,	0x05C8, 0x01F8, 2, 0x0838, 0, 0)
+MX6_PAD_DECL(ENET_RXD0__SPDIF_OUT,	0x05C8, 0x01F8, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RXD0__GPIO1_IO27,	0x05C8, 0x01F8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__MLB_SIG,	0x05CC, 0x01FC, 0, 0x08E4, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__ENET_RX_DATA1,	0x05CC, 0x01FC, 1, 0x081C, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__ESAI_TX_FS,	0x05CC, 0x01FC, 2, 0x0830, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__ENET_1588_EVENT3_OUT,	0x05CC, 0x01FC, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__GPIO1_IO26,	0x05CC, 0x01FC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TX_EN__ENET_TX_EN,	0x05D0, 0x0200, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TX_EN__ESAI_TX3_RX2,	0x05D0, 0x0200, 2, 0x0850, 0, 0)
+MX6_PAD_DECL(ENET_TX_EN__GPIO1_IO28,	0x05D0, 0x0200, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TX_EN__I2C4_SCL,	0x05D0, 0x0200, 9 | IOMUX_CONFIG_SION, 0x0880, 0, 0)
+MX6_PAD_DECL(ENET_TXD0__ENET_TX_DATA0,	0x05D4, 0x0204, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD0__ESAI_TX4_RX1,	0x05D4, 0x0204, 2, 0x0854, 0, 0)
+MX6_PAD_DECL(ENET_TXD0__GPIO1_IO30,	0x05D4, 0x0204, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__MLB_CLK,	0x05D8, 0x0208, 0, 0x08DC, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__ENET_TX_DATA1,	0x05D8, 0x0208, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__ESAI_TX2_RX3,	0x05D8, 0x0208, 2, 0x084C, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__ENET_1588_EVENT0_IN,	0x05D8, 0x0208, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__GPIO1_IO29,	0x05D8, 0x0208, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__I2C4_SDA,	0x05D8, 0x0208, 9 | IOMUX_CONFIG_SION, 0x0884, 0, 0)
+MX6_PAD_DECL(GPIO_0__CCM_CLKO1,	0x05DC, 0x020C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__KEY_COL5,	0x05DC, 0x020C, 2, 0x08C0, 1, 0)
+MX6_PAD_DECL(GPIO_0__ASRC_EXT_CLK,	0x05DC, 0x020C, 3, 0x0794, 0, 0)
+MX6_PAD_DECL(GPIO_0__EPIT1_OUT,	0x05DC, 0x020C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__GPIO1_IO00,	0x05DC, 0x020C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__USB_H1_PWR,	0x05DC, 0x020C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__SNVS_VIO_5,	0x05DC, 0x020C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__ESAI_RX_CLK,	0x05E0, 0x0210, 0, 0x083C, 1, 0)
+MX6_PAD_DECL(GPIO_1__WDOG2_B,	0x05E0, 0x0210, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__KEY_ROW5,	0x05E0, 0x0210, 2, 0x08CC, 1, 0)
+MX6_PAD_DECL(GPIO_1__USB_OTG_ID,	0x05E0, 0x0210, 3, 0x0790, 1, 0)
+MX6_PAD_DECL(GPIO_1__PWM2_OUT,	0x05E0, 0x0210, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__GPIO1_IO01,	0x05E0, 0x0210, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__SD1_CD_B,	0x05E0, 0x0210, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_16__ESAI_TX3_RX2,	0x05E4, 0x0214, 0, 0x0850, 1, 0)
+MX6_PAD_DECL(GPIO_16__ENET_1588_EVENT2_IN,	0x05E4, 0x0214, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_16__ENET_REF_CLK,	0x05E4, 0x0214, 2 | IOMUX_CONFIG_SION, 0x080C, 0, 0)
+MX6_PAD_DECL(GPIO_16__SD1_LCTL,	0x05E4, 0x0214, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_16__SPDIF_IN,	0x05E4, 0x0214, 4, 0x08F0, 2, 0)
+MX6_PAD_DECL(GPIO_16__GPIO7_IO11,	0x05E4, 0x0214, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_16__I2C3_SDA,	0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0)
+MX6_PAD_DECL(GPIO_16__JTAG_DE_B,	0x05E4, 0x0214, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_17__ESAI_TX0,	0x05E8, 0x0218, 0, 0x0844, 0, 0)
+MX6_PAD_DECL(GPIO_17__ENET_1588_EVENT3_IN,	0x05E8, 0x0218, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_17__CCM_PMIC_READY,	0x05E8, 0x0218, 2, 0x07D4, 1, 0)
+MX6_PAD_DECL(GPIO_17__SDMA_EXT_EVENT0,	0x05E8, 0x0218, 3, 0x08E8, 1, 0)
+MX6_PAD_DECL(GPIO_17__SPDIF_OUT,	0x05E8, 0x0218, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_17__GPIO7_IO12,	0x05E8, 0x0218, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_18__ESAI_TX1,	0x05EC, 0x021C, 0, 0x0848, 0, 0)
+MX6_PAD_DECL(GPIO_18__ENET_RX_CLK,	0x05EC, 0x021C, 1, 0x0814, 0, 0)
+MX6_PAD_DECL(GPIO_18__SD3_VSELECT,	0x05EC, 0x021C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_18__SDMA_EXT_EVENT1,	0x05EC, 0x021C, 3, 0x08EC, 1, 0)
+MX6_PAD_DECL(GPIO_18__ASRC_EXT_CLK,	0x05EC, 0x021C, 4, 0x0794, 1, 0)
+MX6_PAD_DECL(GPIO_18__GPIO7_IO13,	0x05EC, 0x021C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_18__SNVS_VIO_5_CTL,	0x05EC, 0x021C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__KEY_COL5,	0x05F0, 0x0220, 0, 0x08C0, 2, 0)
+MX6_PAD_DECL(GPIO_19__ENET_1588_EVENT0_OUT,	0x05F0, 0x0220, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__SPDIF_OUT,	0x05F0, 0x0220, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__CCM_CLKO1,	0x05F0, 0x0220, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__ECSPI1_RDY,	0x05F0, 0x0220, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__GPIO4_IO05,	0x05F0, 0x0220, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__ENET_TX_ER,	0x05F0, 0x0220, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_2__ESAI_TX_FS,	0x05F4, 0x0224, 0, 0x0830, 1, 0)
+MX6_PAD_DECL(GPIO_2__KEY_ROW6,	0x05F4, 0x0224, 2, 0x08D0, 1, 0)
+MX6_PAD_DECL(GPIO_2__GPIO1_IO02,	0x05F4, 0x0224, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_2__SD2_WP,	0x05F4, 0x0224, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_2__MLB_DATA,	0x05F4, 0x0224, 7, 0x08E0, 1, 0)
+MX6_PAD_DECL(GPIO_3__ESAI_RX_HF_CLK,	0x05F8, 0x0228, 0, 0x0834, 1, 0)
+MX6_PAD_DECL(GPIO_3__I2C3_SCL,	0x05F8, 0x0228, 2 | IOMUX_CONFIG_SION, 0x0878, 1, 0)
+MX6_PAD_DECL(GPIO_3__XTALOSC_REF_CLK_24M,	0x05F8, 0x0228, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_3__CCM_CLKO2,	0x05F8, 0x0228, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_3__GPIO1_IO03,	0x05F8, 0x0228, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_3__USB_H1_OC,	0x05F8, 0x0228, 6, 0x0924, 1, 0)
+MX6_PAD_DECL(GPIO_3__MLB_CLK,	0x05F8, 0x0228, 7, 0x08DC, 1, 0)
+MX6_PAD_DECL(GPIO_4__ESAI_TX_HF_CLK,	0x05FC, 0x022C, 0, 0x0838, 1, 0)
+MX6_PAD_DECL(GPIO_4__KEY_COL7,	0x05FC, 0x022C, 2, 0x08C8, 1, 0)
+MX6_PAD_DECL(GPIO_4__GPIO1_IO04,	0x05FC, 0x022C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_4__SD2_CD_B,	0x05FC, 0x022C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_5__ESAI_TX2_RX3,	0x0600, 0x0230, 0, 0x084C, 1, 0)
+MX6_PAD_DECL(GPIO_5__KEY_ROW7,	0x0600, 0x0230, 2, 0x08D4, 1, 0)
+MX6_PAD_DECL(GPIO_5__CCM_CLKO1,	0x0600, 0x0230, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_5__GPIO1_IO05,	0x0600, 0x0230, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_5__I2C3_SCL,	0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0)
+MX6_PAD_DECL(GPIO_5__ARM_EVENTI,	0x0600, 0x0230, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_6__ESAI_TX_CLK,	0x0604, 0x0234, 0, 0x0840, 1, 0)
+MX6_PAD_DECL(GPIO_6__I2C3_SDA,	0x0604, 0x0234, 2 | IOMUX_CONFIG_SION, 0x087C, 2, 0)
+MX6_PAD_DECL(GPIO_6__GPIO1_IO06,	0x0604, 0x0234, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_6__SD2_LCTL,	0x0604, 0x0234, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_6__MLB_SIG,	0x0604, 0x0234, 7, 0x08E4, 1, 0)
+MX6_PAD_DECL(GPIO_7__ESAI_TX4_RX1,	0x0608, 0x0238, 0, 0x0854, 1, 0)
+MX6_PAD_DECL(GPIO_7__EPIT1_OUT,	0x0608, 0x0238, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__FLEXCAN1_TX,	0x0608, 0x0238, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__UART2_TX_DATA,	0x0608, 0x0238, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__UART2_RX_DATA,	0x0608, 0x0238, 4, 0x0904, 2, 0)
+MX6_PAD_DECL(GPIO_7__GPIO1_IO07,	0x0608, 0x0238, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__SPDIF_LOCK,	0x0608, 0x0238, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__USB_OTG_HOST_MODE,	0x0608, 0x0238, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__I2C4_SCL,	0x0608, 0x0238, 8 | IOMUX_CONFIG_SION, 0x0880, 1, 0)
+MX6_PAD_DECL(GPIO_8__ESAI_TX5_RX0,	0x060C, 0x023C, 0, 0x0858, 1, 0)
+MX6_PAD_DECL(GPIO_8__XTALOSC_REF_CLK_32K,	0x060C, 0x023C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__EPIT2_OUT,	0x060C, 0x023C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__FLEXCAN1_RX,	0x060C, 0x023C, 3, 0x07C8, 0, 0)
+MX6_PAD_DECL(GPIO_8__UART2_TX_DATA,	0x060C, 0x023C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__UART2_RX_DATA,	0x060C, 0x023C, 4, 0x0904, 3, 0)
+MX6_PAD_DECL(GPIO_8__GPIO1_IO08,	0x060C, 0x023C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__SPDIF_SR_CLK,	0x060C, 0x023C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__USB_OTG_PWR_CTL_WAKE,	0x060C, 0x023C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__I2C4_SDA,	0x060C, 0x023C, 8 | IOMUX_CONFIG_SION, 0x0884, 1, 0)
+MX6_PAD_DECL(GPIO_9__ESAI_RX_FS,	0x0610, 0x0240, 0, 0x082C, 1, 0)
+MX6_PAD_DECL(GPIO_9__WDOG1_B,	0x0610, 0x0240, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__KEY_COL6,	0x0610, 0x0240, 2, 0x08C4, 1, 0)
+MX6_PAD_DECL(GPIO_9__CCM_REF_EN_B,	0x0610, 0x0240, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__PWM1_OUT,	0x0610, 0x0240, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__GPIO1_IO09,	0x0610, 0x0240, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__SD1_WP,	0x0610, 0x0240, 6, 0x092C, 1, 0)
+MX6_PAD_DECL(KEY_COL0__ECSPI1_SCLK,	0x062C, 0x0244, 0, 0x07D8, 3, 0)
+MX6_PAD_DECL(KEY_COL0__ENET_RX_DATA3,	0x062C, 0x0244, 1, 0x0824, 0, 0)
+MX6_PAD_DECL(KEY_COL0__AUD5_TXC,	0x062C, 0x0244, 2, 0x07C0, 1, 0)
+MX6_PAD_DECL(KEY_COL0__KEY_COL0,	0x062C, 0x0244, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL0__UART4_TX_DATA,	0x062C, 0x0244, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL0__UART4_RX_DATA,	0x062C, 0x0244, 4, 0x0914, 2, 0)
+MX6_PAD_DECL(KEY_COL0__GPIO4_IO06,	0x062C, 0x0244, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL0__DCIC1_OUT,	0x062C, 0x0244, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL1__ECSPI1_MISO,	0x0630, 0x0248, 0, 0x07DC, 3, 0)
+MX6_PAD_DECL(KEY_COL1__ENET_MDIO,	0x0630, 0x0248, 1, 0x0810, 1, 0)
+MX6_PAD_DECL(KEY_COL1__AUD5_TXFS,	0x0630, 0x0248, 2, 0x07C4, 1, 0)
+MX6_PAD_DECL(KEY_COL1__KEY_COL1,	0x0630, 0x0248, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL1__UART5_TX_DATA,	0x0630, 0x0248, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL1__UART5_RX_DATA,	0x0630, 0x0248, 4, 0x091C, 2, 0)
+MX6_PAD_DECL(KEY_COL1__GPIO4_IO08,	0x0630, 0x0248, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL1__SD1_VSELECT,	0x0630, 0x0248, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__ECSPI1_SS1,	0x0634, 0x024C, 0, 0x07E8, 2, 0)
+MX6_PAD_DECL(KEY_COL2__ENET_RX_DATA2,	0x0634, 0x024C, 1, 0x0820, 0, 0)
+MX6_PAD_DECL(KEY_COL2__FLEXCAN1_TX,	0x0634, 0x024C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__KEY_COL2,	0x0634, 0x024C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__ENET_MDC,	0x0634, 0x024C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__GPIO4_IO10,	0x0634, 0x024C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__USB_H1_PWR_CTL_WAKE,	0x0634, 0x024C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL3__ECSPI1_SS3,	0x0638, 0x0250, 0, 0x07F0, 1, 0)
+MX6_PAD_DECL(KEY_COL3__ENET_CRS,	0x0638, 0x0250, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL3__HDMI_TX_DDC_SCL,	0x0638, 0x0250, 2, 0x0860, 1, 0)
+MX6_PAD_DECL(KEY_COL3__KEY_COL3,	0x0638, 0x0250, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL3__I2C2_SCL,	0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0)
+MX6_PAD_DECL(KEY_COL3__GPIO4_IO12,	0x0638, 0x0250, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL3__SPDIF_IN,	0x0638, 0x0250, 6, 0x08F0, 3, 0)
+MX6_PAD_DECL(KEY_COL4__FLEXCAN2_TX,	0x063C, 0x0254, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__IPU1_SISG4,	0x063C, 0x0254, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__USB_OTG_OC,	0x063C, 0x0254, 2, 0x0920, 1, 0)
+MX6_PAD_DECL(KEY_COL4__KEY_COL4,	0x063C, 0x0254, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__UART5_CTS_B,	0x063C, 0x0254, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__UART5_RTS_B,	0x063C, 0x0254, 4, 0x0918, 2, 0)
+MX6_PAD_DECL(KEY_COL4__GPIO4_IO14,	0x063C, 0x0254, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__ECSPI1_MOSI,	0x0640, 0x0258, 0, 0x07E0, 3, 0)
+MX6_PAD_DECL(KEY_ROW0__ENET_TX_DATA3,	0x0640, 0x0258, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__AUD5_TXD,	0x0640, 0x0258, 2, 0x07B4, 1, 0)
+MX6_PAD_DECL(KEY_ROW0__KEY_ROW0,	0x0640, 0x0258, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__UART4_TX_DATA,	0x0640, 0x0258, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__UART4_RX_DATA,	0x0640, 0x0258, 4, 0x0914, 3, 0)
+MX6_PAD_DECL(KEY_ROW0__GPIO4_IO07,	0x0640, 0x0258, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__DCIC2_OUT,	0x0640, 0x0258, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__ECSPI1_SS0,	0x0644, 0x025C, 0, 0x07E4, 3, 0)
+MX6_PAD_DECL(KEY_ROW1__ENET_COL,	0x0644, 0x025C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__AUD5_RXD,	0x0644, 0x025C, 2, 0x07B0, 1, 0)
+MX6_PAD_DECL(KEY_ROW1__KEY_ROW1,	0x0644, 0x025C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__UART5_TX_DATA,	0x0644, 0x025C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__UART5_RX_DATA,	0x0644, 0x025C, 4, 0x091C, 3, 0)
+MX6_PAD_DECL(KEY_ROW1__GPIO4_IO09,	0x0644, 0x025C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__SD2_VSELECT,	0x0644, 0x025C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__ECSPI1_SS2,	0x0648, 0x0260, 0, 0x07EC, 1, 0)
+MX6_PAD_DECL(KEY_ROW2__ENET_TX_DATA2,	0x0648, 0x0260, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__FLEXCAN1_RX,	0x0648, 0x0260, 2, 0x07C8, 1, 0)
+MX6_PAD_DECL(KEY_ROW2__KEY_ROW2,	0x0648, 0x0260, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__SD2_VSELECT,	0x0648, 0x0260, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__GPIO4_IO11,	0x0648, 0x0260, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__HDMI_TX_CEC_LINE,	0x0648, 0x0260, 6, 0x085C, 1, 0)
+MX6_PAD_DECL(KEY_ROW3__ASRC_EXT_CLK,	0x064C, 0x0264, 1, 0x0794, 2, 0)
+MX6_PAD_DECL(KEY_ROW3__HDMI_TX_DDC_SDA,	0x064C, 0x0264, 2, 0x0864, 1, 0)
+MX6_PAD_DECL(KEY_ROW3__KEY_ROW3,	0x064C, 0x0264, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW3__I2C2_SDA,	0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0)
+MX6_PAD_DECL(KEY_ROW3__GPIO4_IO13,	0x064C, 0x0264, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW3__SD1_VSELECT,	0x064C, 0x0264, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__FLEXCAN2_RX,	0x0650, 0x0268, 0, 0x07CC, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__IPU1_SISG5,	0x0650, 0x0268, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__USB_OTG_PWR,	0x0650, 0x0268, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__KEY_ROW4,	0x0650, 0x0268, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__UART5_CTS_B,	0x0650, 0x0268, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__UART5_RTS_B,	0x0650, 0x0268, 4, 0x0918, 3, 0)
+MX6_PAD_DECL(KEY_ROW4__GPIO4_IO15,	0x0650, 0x0268, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_ALE__NAND_ALE,	0x0654, 0x026C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_ALE__SD4_RESET,	0x0654, 0x026C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_ALE__GPIO6_IO08,	0x0654, 0x026C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CLE__NAND_CLE,	0x0658, 0x0270, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CLE__GPIO6_IO07,	0x0658, 0x0270, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS0__NAND_CE0_B,	0x065C, 0x0274, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS0__GPIO6_IO11,	0x065C, 0x0274, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS1__NAND_CE1_B,	0x0660, 0x0278, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS1__SD4_VSELECT,	0x0660, 0x0278, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS1__SD3_VSELECT,	0x0660, 0x0278, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS1__GPIO6_IO14,	0x0660, 0x0278, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__NAND_CE2_B,	0x0664, 0x027C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__IPU1_SISG0,	0x0664, 0x027C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__ESAI_TX0,	0x0664, 0x027C, 2, 0x0844, 1, 0)
+MX6_PAD_DECL(NANDF_CS2__EIM_CRE,	0x0664, 0x027C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__CCM_CLKO2,	0x0664, 0x027C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__GPIO6_IO15,	0x0664, 0x027C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__NAND_CE3_B,	0x0668, 0x0280, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__IPU1_SISG1,	0x0668, 0x0280, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__ESAI_TX1,	0x0668, 0x0280, 2, 0x0848, 1, 0)
+MX6_PAD_DECL(NANDF_CS3__EIM_ADDR26,	0x0668, 0x0280, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__GPIO6_IO16,	0x0668, 0x0280, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__I2C4_SDA,	0x0668, 0x0280, 9 | IOMUX_CONFIG_SION, 0x0884, 2, 0)
+MX6_PAD_DECL(NANDF_D0__NAND_DATA00,	0x066C, 0x0284, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D0__SD1_DATA4,	0x066C, 0x0284, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D0__GPIO2_IO00,	0x066C, 0x0284, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D1__NAND_DATA01,	0x0670, 0x0288, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D1__SD1_DATA5,	0x0670, 0x0288, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D1__GPIO2_IO01,	0x0670, 0x0288, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D2__NAND_DATA02,	0x0674, 0x028C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D2__SD1_DATA6,	0x0674, 0x028C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D2__GPIO2_IO02,	0x0674, 0x028C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D3__NAND_DATA03,	0x0678, 0x0290, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D3__SD1_DATA7,	0x0678, 0x0290, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D3__GPIO2_IO03,	0x0678, 0x0290, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D4__NAND_DATA04,	0x067C, 0x0294, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D4__SD2_DATA4,	0x067C, 0x0294, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D4__GPIO2_IO04,	0x067C, 0x0294, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D5__NAND_DATA05,	0x0680, 0x0298, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D5__SD2_DATA5,	0x0680, 0x0298, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D5__GPIO2_IO05,	0x0680, 0x0298, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D6__NAND_DATA06,	0x0684, 0x029C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D6__SD2_DATA6,	0x0684, 0x029C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D6__GPIO2_IO06,	0x0684, 0x029C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D7__NAND_DATA07,	0x0688, 0x02A0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D7__SD2_DATA7,	0x0688, 0x02A0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D7__GPIO2_IO07,	0x0688, 0x02A0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_RB0__NAND_READY_B,	0x068C, 0x02A4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_RB0__GPIO6_IO10,	0x068C, 0x02A4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_WP_B__NAND_WP_B,	0x0690, 0x02A8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_WP_B__GPIO6_IO09,	0x0690, 0x02A8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_WP_B__I2C4_SCL,	0x0690, 0x02A8, 9 | IOMUX_CONFIG_SION, 0x0880, 2, 0)
+MX6_PAD_DECL(RGMII_RD0__HSI_RX_READY,	0x0694, 0x02AC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD0__RGMII_RD0,	0x0694, 0x02AC, 1, 0x0818, 1, 0)
+MX6_PAD_DECL(RGMII_RD0__GPIO6_IO25,	0x0694, 0x02AC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD1__HSI_TX_FLAG,	0x0698, 0x02B0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD1__RGMII_RD1,	0x0698, 0x02B0, 1, 0x081C, 1, 0)
+MX6_PAD_DECL(RGMII_RD1__GPIO6_IO27,	0x0698, 0x02B0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD2__HSI_TX_DATA,	0x069C, 0x02B4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD2__RGMII_RD2,	0x069C, 0x02B4, 1, 0x0820, 1, 0)
+MX6_PAD_DECL(RGMII_RD2__GPIO6_IO28,	0x069C, 0x02B4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD3__HSI_TX_WAKE,	0x06A0, 0x02B8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD3__RGMII_RD3,	0x06A0, 0x02B8, 1, 0x0824, 1, 0)
+MX6_PAD_DECL(RGMII_RD3__GPIO6_IO29,	0x06A0, 0x02B8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RX_CTL__USB_H3_DATA,	0x06A4, 0x02BC, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RX_CTL__RGMII_RX_CTL,	0x06A4, 0x02BC, 1, 0x0828, 1, 0)
+MX6_PAD_DECL(RGMII_RX_CTL__GPIO6_IO24,	0x06A4, 0x02BC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RXC__USBOH3_H3_STROBE,	0x06A8, 0x02C0, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RXC__USB_H3_STROBE,	0x06A8, 0x02C0, 0 | IOMUX_CONFIG_SION, 0x0000, 0, PAD_CTL_PUS_47K_UP)
+MX6_PAD_DECL(RGMII_RXC__RGMII_RXC,	0x06A8, 0x02C0, 1, 0x0814, 1, 0)
+MX6_PAD_DECL(RGMII_RXC__GPIO6_IO30,	0x06A8, 0x02C0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD0__HSI_TX_READY,	0x06AC, 0x02C4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD0__RGMII_TD0,	0x06AC, 0x02C4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD0__GPIO6_IO20,	0x06AC, 0x02C4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD1__HSI_RX_FLAG,	0x06B0, 0x02C8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD1__RGMII_TD1,	0x06B0, 0x02C8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD1__GPIO6_IO21,	0x06B0, 0x02C8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD2__HSI_RX_DATA,	0x06B4, 0x02CC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD2__RGMII_TD2,	0x06B4, 0x02CC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD2__GPIO6_IO22,	0x06B4, 0x02CC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD3__HSI_RX_WAKE,	0x06B8, 0x02D0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD3__RGMII_TD3,	0x06B8, 0x02D0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD3__GPIO6_IO23,	0x06B8, 0x02D0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__USBOH3_H2_STROBE,	0x06BC, 0x02D4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__USB_H2_STROBE,	0x06BC, 0x02D4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, PAD_CTL_PUS_47K_UP)
+MX6_PAD_DECL(RGMII_TX_CTL__RGMII_TX_CTL,	0x06BC, 0x02D4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__GPIO6_IO26,	0x06BC, 0x02D4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK,	0x06BC, 0x02D4, 7 | IOMUX_CONFIG_SION, 0x080C, 1, 0)
+MX6_PAD_DECL(RGMII_TXC__USB_H2_DATA,	0x06C0, 0x02D8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TXC__RGMII_TXC,	0x06C0, 0x02D8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TXC__SPDIF_EXT_CLK,	0x06C0, 0x02D8, 2, 0x08F4, 1, 0)
+MX6_PAD_DECL(RGMII_TXC__GPIO6_IO19,	0x06C0, 0x02D8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TXC__XTALOSC_REF_CLK_24M,	0x06C0, 0x02D8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CLK__SD1_CLK,	0x06C4, 0x02DC, 0, 0x0928, 1, 0)
+MX6_PAD_DECL(SD1_CLK__GPT_CLKIN,	0x06C4, 0x02DC, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CLK__GPIO1_IO20,	0x06C4, 0x02DC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__SD1_CMD,	0x06C8, 0x02E0, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__PWM4_OUT,	0x06C8, 0x02E0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__GPT_COMPARE1,	0x06C8, 0x02E0, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__GPIO1_IO18,	0x06C8, 0x02E0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT0__SD1_DATA0,	0x06CC, 0x02E4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT0__GPT_CAPTURE1,	0x06CC, 0x02E4, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT0__GPIO1_IO16,	0x06CC, 0x02E4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT1__SD1_DATA1,	0x06D0, 0x02E8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT1__PWM3_OUT,	0x06D0, 0x02E8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT1__GPT_CAPTURE2,	0x06D0, 0x02E8, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT1__GPIO1_IO17,	0x06D0, 0x02E8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__SD1_DATA2,	0x06D4, 0x02EC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__GPT_COMPARE2,	0x06D4, 0x02EC, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__PWM2_OUT,	0x06D4, 0x02EC, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__WDOG1_B,	0x06D4, 0x02EC, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__GPIO1_IO19,	0x06D4, 0x02EC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__WDOG1_RESET_B_DEB,	0x06D4, 0x02EC, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__SD1_DATA3,	0x06D8, 0x02F0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__GPT_COMPARE3,	0x06D8, 0x02F0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__PWM1_OUT,	0x06D8, 0x02F0, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__WDOG2_B,	0x06D8, 0x02F0, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__GPIO1_IO21,	0x06D8, 0x02F0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__WDOG2_RESET_B_DEB,	0x06D8, 0x02F0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_CLK__SD2_CLK,	0x06DC, 0x02F4, 0, 0x0930, 1, 0)
+MX6_PAD_DECL(SD2_CLK__KEY_COL5,	0x06DC, 0x02F4, 2, 0x08C0, 3, 0)
+MX6_PAD_DECL(SD2_CLK__AUD4_RXFS,	0x06DC, 0x02F4, 3, 0x07A4, 1, 0)
+MX6_PAD_DECL(SD2_CLK__GPIO1_IO10,	0x06DC, 0x02F4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_CMD__SD2_CMD,	0x06E0, 0x02F8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_CMD__KEY_ROW5,	0x06E0, 0x02F8, 2, 0x08CC, 2, 0)
+MX6_PAD_DECL(SD2_CMD__AUD4_RXC,	0x06E0, 0x02F8, 3, 0x07A0, 1, 0)
+MX6_PAD_DECL(SD2_CMD__GPIO1_IO11,	0x06E0, 0x02F8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__SD2_DATA0,	0x06E4, 0x02FC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__AUD4_RXD,	0x06E4, 0x02FC, 3, 0x0798, 1, 0)
+MX6_PAD_DECL(SD2_DAT0__KEY_ROW7,	0x06E4, 0x02FC, 4, 0x08D4, 2, 0)
+MX6_PAD_DECL(SD2_DAT0__GPIO1_IO15,	0x06E4, 0x02FC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__DCIC2_OUT,	0x06E4, 0x02FC, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT1__SD2_DATA1,	0x06E8, 0x0300, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT1__EIM_CS2_B,	0x06E8, 0x0300, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT1__AUD4_TXFS,	0x06E8, 0x0300, 3, 0x07AC, 1, 0)
+MX6_PAD_DECL(SD2_DAT1__KEY_COL7,	0x06E8, 0x0300, 4, 0x08C8, 2, 0)
+MX6_PAD_DECL(SD2_DAT1__GPIO1_IO14,	0x06E8, 0x0300, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__SD2_DATA2,	0x06EC, 0x0304, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__EIM_CS3_B,	0x06EC, 0x0304, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__AUD4_TXD,	0x06EC, 0x0304, 3, 0x079C, 1, 0)
+MX6_PAD_DECL(SD2_DAT2__KEY_ROW6,	0x06EC, 0x0304, 4, 0x08D0, 2, 0)
+MX6_PAD_DECL(SD2_DAT2__GPIO1_IO13,	0x06EC, 0x0304, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT3__SD2_DATA3,	0x06F0, 0x0308, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT3__KEY_COL6,	0x06F0, 0x0308, 2, 0x08C4, 2, 0)
+MX6_PAD_DECL(SD2_DAT3__AUD4_TXC,	0x06F0, 0x0308, 3, 0x07A8, 1, 0)
+MX6_PAD_DECL(SD2_DAT3__GPIO1_IO12,	0x06F0, 0x0308, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CLK__SD3_CLK,	0x06F4, 0x030C, 0, 0x0934, 1, 0)
+MX6_PAD_DECL(SD3_CLK__UART2_CTS_B,	0x06F4, 0x030C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CLK__UART2_RTS_B,	0x06F4, 0x030C, 1, 0x0900, 2, 0)
+MX6_PAD_DECL(SD3_CLK__FLEXCAN1_RX,	0x06F4, 0x030C, 2, 0x07C8, 2, 0)
+MX6_PAD_DECL(SD3_CLK__GPIO7_IO03,	0x06F4, 0x030C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__SD3_CMD,	0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__UART2_CTS_B,	0x06F8, 0x0310, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__UART2_RTS_B,	0x06F8, 0x0310, 1, 0x0900, 3, 0)
+MX6_PAD_DECL(SD3_CMD__FLEXCAN1_TX,	0x06F8, 0x0310, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__GPIO7_IO02,	0x06F8, 0x0310, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT0__SD3_DATA0,	0x06FC, 0x0314, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT0__UART1_CTS_B,	0x06FC, 0x0314, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT0__UART1_RTS_B,	0x06FC, 0x0314, 1, 0x08F8, 2, 0)
+MX6_PAD_DECL(SD3_DAT0__FLEXCAN2_TX,	0x06FC, 0x0314, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT0__GPIO7_IO04,	0x06FC, 0x0314, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT1__SD3_DATA1,	0x0700, 0x0318, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT1__UART1_CTS_B,	0x0700, 0x0318, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT1__UART1_RTS_B,	0x0700, 0x0318, 1, 0x08F8, 3, 0)
+MX6_PAD_DECL(SD3_DAT1__FLEXCAN2_RX,	0x0700, 0x0318, 2, 0x07CC, 1, 0)
+MX6_PAD_DECL(SD3_DAT1__GPIO7_IO05,	0x0700, 0x0318, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT2__SD3_DATA2,	0x0704, 0x031C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT2__GPIO7_IO06,	0x0704, 0x031C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT3__SD3_DATA3,	0x0708, 0x0320, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT3__UART3_CTS_B,	0x0708, 0x0320, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT3__UART3_RTS_B,	0x0708, 0x0320, 1, 0x0908, 4, 0)
+MX6_PAD_DECL(SD3_DAT3__GPIO7_IO07,	0x0708, 0x0320, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT4__SD3_DATA4,	0x070C, 0x0324, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT4__UART2_TX_DATA,	0x070C, 0x0324, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT4__UART2_RX_DATA,	0x070C, 0x0324, 1, 0x0904, 4, 0)
+MX6_PAD_DECL(SD3_DAT4__GPIO7_IO01,	0x070C, 0x0324, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT5__SD3_DATA5,	0x0710, 0x0328, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT5__UART2_TX_DATA,	0x0710, 0x0328, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT5__UART2_RX_DATA,	0x0710, 0x0328, 1, 0x0904, 5, 0)
+MX6_PAD_DECL(SD3_DAT5__GPIO7_IO00,	0x0710, 0x0328, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT6__SD3_DATA6,	0x0714, 0x032C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT6__UART1_TX_DATA,	0x0714, 0x032C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT6__UART1_RX_DATA,	0x0714, 0x032C, 1, 0x08FC, 2, 0)
+MX6_PAD_DECL(SD3_DAT6__GPIO6_IO18,	0x0714, 0x032C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT7__SD3_DATA7,	0x0718, 0x0330, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT7__UART1_TX_DATA,	0x0718, 0x0330, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT7__UART1_RX_DATA,	0x0718, 0x0330, 1, 0x08FC, 3, 0)
+MX6_PAD_DECL(SD3_DAT7__GPIO6_IO17,	0x0718, 0x0330, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_RST__SD3_RESET,	0x071C, 0x0334, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_RST__UART3_CTS_B,	0x071C, 0x0334, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_RST__UART3_RTS_B,	0x071C, 0x0334, 1, 0x0908, 5, 0)
+MX6_PAD_DECL(SD3_RST__GPIO7_IO08,	0x071C, 0x0334, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CLK__SD4_CLK,	0x0720, 0x0338, 0, 0x0938, 1, 0)
+MX6_PAD_DECL(SD4_CLK__NAND_WE_B,	0x0720, 0x0338, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CLK__UART3_TX_DATA,	0x0720, 0x0338, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CLK__UART3_RX_DATA,	0x0720, 0x0338, 2, 0x090C, 2, 0)
+MX6_PAD_DECL(SD4_CLK__GPIO7_IO10,	0x0720, 0x0338, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__SD4_CMD,	0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__NAND_RE_B,	0x0724, 0x033C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__UART3_TX_DATA,	0x0724, 0x033C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__UART3_RX_DATA,	0x0724, 0x033C, 2, 0x090C, 3, 0)
+MX6_PAD_DECL(SD4_CMD__GPIO7_IO09,	0x0724, 0x033C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT0__SD4_DATA0,	0x0728, 0x0340, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT0__NAND_DQS,	0x0728, 0x0340, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT0__GPIO2_IO08,	0x0728, 0x0340, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT1__SD4_DATA1,	0x072C, 0x0344, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT1__PWM3_OUT,	0x072C, 0x0344, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT1__GPIO2_IO09,	0x072C, 0x0344, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT2__SD4_DATA2,	0x0730, 0x0348, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT2__PWM4_OUT,	0x0730, 0x0348, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT2__GPIO2_IO10,	0x0730, 0x0348, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT3__SD4_DATA3,	0x0734, 0x034C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT3__GPIO2_IO11,	0x0734, 0x034C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT4__SD4_DATA4,	0x0738, 0x0350, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT4__UART2_TX_DATA,	0x0738, 0x0350, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT4__UART2_RX_DATA,	0x0738, 0x0350, 2, 0x0904, 6, 0)
+MX6_PAD_DECL(SD4_DAT4__GPIO2_IO12,	0x0738, 0x0350, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT5__SD4_DATA5,	0x073C, 0x0354, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT5__UART2_CTS_B,	0x073C, 0x0354, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT5__UART2_RTS_B,	0x073C, 0x0354, 2, 0x0900, 4, 0)
+MX6_PAD_DECL(SD4_DAT5__GPIO2_IO13,	0x073C, 0x0354, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT6__SD4_DATA6,	0x0740, 0x0358, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT6__UART2_CTS_B,	0x0740, 0x0358, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT6__UART2_RTS_B,	0x0740, 0x0358, 2, 0x0900, 5, 0)
+MX6_PAD_DECL(SD4_DAT6__GPIO2_IO14,	0x0740, 0x0358, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT7__SD4_DATA7,	0x0744, 0x035C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT7__UART2_TX_DATA,	0x0744, 0x035C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT7__UART2_RX_DATA,	0x0744, 0x035C, 2, 0x0904, 7, 0)
+MX6_PAD_DECL(SD4_DAT7__GPIO2_IO15,	0x0744, 0x035C, 5, 0x0000, 0, 0)
+
+#endif	/* __ASM_ARCH_MX6_MX6DL_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6q-ddr.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6q-ddr.h
new file mode 100644
index 000000000..c76a92020
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6q-ddr.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Boundary Devices Inc.
+ */
+#ifndef __ASM_ARCH_MX6Q_DDR_H__
+#define __ASM_ARCH_MX6Q_DDR_H__
+
+#ifndef CONFIG_MX6Q
+#error "wrong CPU"
+#endif
+
+#define MX6_IOM_DRAM_DQM0	0x020e05ac
+#define MX6_IOM_DRAM_DQM1	0x020e05b4
+#define MX6_IOM_DRAM_DQM2	0x020e0528
+#define MX6_IOM_DRAM_DQM3	0x020e0520
+#define MX6_IOM_DRAM_DQM4	0x020e0514
+#define MX6_IOM_DRAM_DQM5	0x020e0510
+#define MX6_IOM_DRAM_DQM6	0x020e05bc
+#define MX6_IOM_DRAM_DQM7	0x020e05c4
+
+#define MX6_IOM_DRAM_CAS	0x020e056c
+#define MX6_IOM_DRAM_RAS	0x020e0578
+#define MX6_IOM_DRAM_RESET	0x020e057c
+#define MX6_IOM_DRAM_SDCLK_0	0x020e0588
+#define MX6_IOM_DRAM_SDCLK_1	0x020e0594
+#define MX6_IOM_DRAM_SDBA2	0x020e058c
+#define MX6_IOM_DRAM_SDCKE0	0x020e0590
+#define MX6_IOM_DRAM_SDCKE1	0x020e0598
+#define MX6_IOM_DRAM_SDODT0	0x020e059c
+#define MX6_IOM_DRAM_SDODT1	0x020e05a0
+
+#define MX6_IOM_DRAM_SDQS0	0x020e05a8
+#define MX6_IOM_DRAM_SDQS1	0x020e05b0
+#define MX6_IOM_DRAM_SDQS2	0x020e0524
+#define MX6_IOM_DRAM_SDQS3	0x020e051c
+#define MX6_IOM_DRAM_SDQS4	0x020e0518
+#define MX6_IOM_DRAM_SDQS5	0x020e050c
+#define MX6_IOM_DRAM_SDQS6	0x020e05b8
+#define MX6_IOM_DRAM_SDQS7	0x020e05c0
+
+#define MX6_IOM_GRP_B0DS	0x020e0784
+#define MX6_IOM_GRP_B1DS	0x020e0788
+#define MX6_IOM_GRP_B2DS	0x020e0794
+#define MX6_IOM_GRP_B3DS	0x020e079c
+#define MX6_IOM_GRP_B4DS	0x020e07a0
+#define MX6_IOM_GRP_B5DS	0x020e07a4
+#define MX6_IOM_GRP_B6DS	0x020e07a8
+#define MX6_IOM_GRP_B7DS	0x020e0748
+#define MX6_IOM_GRP_ADDDS	0x020e074c
+#define MX6_IOM_DDRMODE_CTL	0x020e0750
+#define MX6_IOM_GRP_DDRPKE	0x020e0758
+#define MX6_IOM_GRP_DDRMODE	0x020e0774
+#define MX6_IOM_GRP_CTLDS	0x020e078c
+#define MX6_IOM_GRP_DDR_TYPE	0x020e0798
+
+#endif	/*__ASM_ARCH_MX6Q_DDR_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6q_pins.h
new file mode 100644
index 000000000..dce13d07f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -0,0 +1,1035 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Auto Generate file, please don't edit it
+ */
+
+#ifndef __ASM_ARCH_MX6_MX6Q_PINS_H__
+#define __ASM_ARCH_MX6_MX6Q_PINS_H__
+
+MX6_PAD_DECL(SD2_DAT1__SD2_DATA1,	0x0360, 0x004C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT1__ECSPI5_SS0,	0x0360, 0x004C, 1, 0x0834, 0, 0)
+MX6_PAD_DECL(SD2_DAT1__EIM_CS2_B,	0x0360, 0x004C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT1__AUD4_TXFS,	0x0360, 0x004C, 3, 0x07C8, 0, 0)
+MX6_PAD_DECL(SD2_DAT1__KEY_COL7,	0x0360, 0x004C, 4, 0x08F0, 0, 0)
+MX6_PAD_DECL(SD2_DAT1__GPIO1_IO14,	0x0360, 0x004C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__SD2_DATA2,	0x0364, 0x0050, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__ECSPI5_SS1,	0x0364, 0x0050, 1, 0x0838, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__EIM_CS3_B,	0x0364, 0x0050, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__AUD4_TXD,	0x0364, 0x0050, 3, 0x07B8, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__KEY_ROW6,	0x0364, 0x0050, 4, 0x08F8, 0, 0)
+MX6_PAD_DECL(SD2_DAT2__GPIO1_IO13,	0x0364, 0x0050, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__SD2_DATA0,	0x0368, 0x0054, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__ECSPI5_MISO,	0x0368, 0x0054, 1, 0x082C, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__AUD4_RXD,	0x0368, 0x0054, 3, 0x07B4, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__KEY_ROW7,	0x0368, 0x0054, 4, 0x08FC, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__GPIO1_IO15,	0x0368, 0x0054, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT0__DCIC2_OUT,	0x0368, 0x0054, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TXC__USB_H2_DATA,	0x036C, 0x0058, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TXC__RGMII_TXC,	0x036C, 0x0058, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TXC__SPDIF_EXT_CLK,	0x036C, 0x0058, 2, 0x0918, 0, 0)
+MX6_PAD_DECL(RGMII_TXC__GPIO6_IO19,	0x036C, 0x0058, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TXC__XTALOSC_REF_CLK_24M,	0x036C, 0x0058, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD0__HSI_TX_READY,	0x0370, 0x005C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD0__RGMII_TD0,	0x0370, 0x005C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD0__GPIO6_IO20,	0x0370, 0x005C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD1__HSI_RX_FLAG,	0x0374, 0x0060, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD1__RGMII_TD1,	0x0374, 0x0060, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD1__GPIO6_IO21,	0x0374, 0x0060, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD2__HSI_RX_DATA,	0x0378, 0x0064, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD2__RGMII_TD2,	0x0378, 0x0064, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD2__GPIO6_IO22,	0x0378, 0x0064, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD3__HSI_RX_WAKE,	0x037C, 0x0068, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD3__RGMII_TD3,	0x037C, 0x0068, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TD3__GPIO6_IO23,	0x037C, 0x0068, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RX_CTL__USB_H3_DATA,	0x0380, 0x006C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RX_CTL__RGMII_RX_CTL,	0x0380, 0x006C, 1, 0x0858, 0, 0)
+MX6_PAD_DECL(RGMII_RX_CTL__GPIO6_IO24,	0x0380, 0x006C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD0__HSI_RX_READY,	0x0384, 0x0070, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD0__RGMII_RD0,	0x0384, 0x0070, 1, 0x0848, 0, 0)
+MX6_PAD_DECL(RGMII_RD0__GPIO6_IO25,	0x0384, 0x0070, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__USB_H2_STROBE,	0x0388, 0x0074, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__RGMII_TX_CTL,	0x0388, 0x0074, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__GPIO6_IO26,	0x0388, 0x0074, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK,	0x0388, 0x0074, 7 | IOMUX_CONFIG_SION, 0x083C, 0, 0)
+MX6_PAD_DECL(RGMII_RD1__HSI_TX_FLAG,	0x038C, 0x0078, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD1__RGMII_RD1,	0x038C, 0x0078, 1, 0x084C, 0, 0)
+MX6_PAD_DECL(RGMII_RD1__GPIO6_IO27,	0x038C, 0x0078, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD2__HSI_TX_DATA,	0x0390, 0x007C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD2__RGMII_RD2,	0x0390, 0x007C, 1, 0x0850, 0, 0)
+MX6_PAD_DECL(RGMII_RD2__GPIO6_IO28,	0x0390, 0x007C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD3__HSI_TX_WAKE,	0x0394, 0x0080, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RD3__RGMII_RD3,	0x0394, 0x0080, 1, 0x0854, 0, 0)
+MX6_PAD_DECL(RGMII_RD3__GPIO6_IO29,	0x0394, 0x0080, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RXC__USB_H3_STROBE,	0x0398, 0x0084, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(RGMII_RXC__RGMII_RXC,	0x0398, 0x0084, 1, 0x0844, 0, 0)
+MX6_PAD_DECL(RGMII_RXC__GPIO6_IO30,	0x0398, 0x0084, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__EIM_ADDR25,	0x039C, 0x0088, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__ECSPI4_SS1,	0x039C, 0x0088, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__ECSPI2_RDY,	0x039C, 0x0088, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__IPU1_DI1_PIN12,	0x039C, 0x0088, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__IPU1_DI0_D1_CS,	0x039C, 0x0088, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__GPIO5_IO02,	0x039C, 0x0088, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A25__HDMI_TX_CEC_LINE,	0x039C, 0x0088, 6, 0x088C, 0, 0)
+MX6_PAD_DECL(EIM_EB2__EIM_EB2_B,	0x03A0, 0x008C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB2__ECSPI1_SS0,	0x03A0, 0x008C, 1, 0x0800, 0, 0)
+MX6_PAD_DECL(EIM_EB2__IPU2_CSI1_DATA19,	0x03A0, 0x008C, 3, 0x08D4, 0, 0)
+MX6_PAD_DECL(EIM_EB2__HDMI_TX_DDC_SCL,	0x03A0, 0x008C, 4, 0x0890, 0, 0)
+MX6_PAD_DECL(EIM_EB2__GPIO2_IO30,	0x03A0, 0x008C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB2__I2C2_SCL,	0x03A0, 0x008C, 22, 0x08A0, 0, 0)
+MX6_PAD_DECL(EIM_EB2__SRC_BOOT_CFG30,	0x03A0, 0x008C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D16__EIM_DATA16,	0x03A4, 0x0090, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D16__ECSPI1_SCLK,	0x03A4, 0x0090, 1, 0x07F4, 0, 0)
+MX6_PAD_DECL(EIM_D16__IPU1_DI0_PIN05,	0x03A4, 0x0090, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D16__IPU2_CSI1_DATA18,	0x03A4, 0x0090, 3, 0x08D0, 0, 0)
+MX6_PAD_DECL(EIM_D16__HDMI_TX_DDC_SDA,	0x03A4, 0x0090, 4, 0x0894, 0, 0)
+MX6_PAD_DECL(EIM_D16__GPIO3_IO16,	0x03A4, 0x0090, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D16__I2C2_SDA,	0x03A4, 0x0090, 22, 0x08A4, 0, 0)
+MX6_PAD_DECL(EIM_D17__EIM_DATA17,	0x03A8, 0x0094, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__ECSPI1_MISO,	0x03A8, 0x0094, 1, 0x07F8, 0, 0)
+MX6_PAD_DECL(EIM_D17__IPU1_DI0_PIN06,	0x03A8, 0x0094, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__IPU2_CSI1_PIXCLK,	0x03A8, 0x0094, 3, 0x08E0, 0, 0)
+MX6_PAD_DECL(EIM_D17__DCIC1_OUT,	0x03A8, 0x0094, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__GPIO3_IO17,	0x03A8, 0x0094, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D17__I2C3_SCL,	0x03A8, 0x0094, 22, 0x08A8, 0, 0)
+MX6_PAD_DECL(EIM_D18__EIM_DATA18,	0x03AC, 0x0098, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__ECSPI1_MOSI,	0x03AC, 0x0098, 1, 0x07FC, 0, 0)
+MX6_PAD_DECL(EIM_D18__IPU1_DI0_PIN07,	0x03AC, 0x0098, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__IPU2_CSI1_DATA17,	0x03AC, 0x0098, 3, 0x08CC, 0, 0)
+MX6_PAD_DECL(EIM_D18__IPU1_DI1_D0_CS,	0x03AC, 0x0098, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__GPIO3_IO18,	0x03AC, 0x0098, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D18__I2C3_SDA,	0x03AC, 0x0098, 22, 0x08AC, 0, 0)
+MX6_PAD_DECL(EIM_D19__EIM_DATA19,	0x03B0, 0x009C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__ECSPI1_SS1,	0x03B0, 0x009C, 1, 0x0804, 0, 0)
+MX6_PAD_DECL(EIM_D19__IPU1_DI0_PIN08,	0x03B0, 0x009C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__IPU2_CSI1_DATA16,	0x03B0, 0x009C, 3, 0x08C8, 0, 0)
+MX6_PAD_DECL(EIM_D19__UART1_CTS_B,	0x03B0, 0x009C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__UART1_RTS_B,	0x03B0, 0x009C, 4, 0x091C, 0, 0)
+MX6_PAD_DECL(EIM_D19__GPIO3_IO19,	0x03B0, 0x009C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D19__EPIT1_OUT,	0x03B0, 0x009C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__EIM_DATA20,	0x03B4, 0x00A0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__ECSPI4_SS0,	0x03B4, 0x00A0, 1, 0x0824, 0, 0)
+MX6_PAD_DECL(EIM_D20__IPU1_DI0_PIN16,	0x03B4, 0x00A0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__IPU2_CSI1_DATA15,	0x03B4, 0x00A0, 3, 0x08C4, 0, 0)
+MX6_PAD_DECL(EIM_D20__UART1_CTS_B,	0x03B4, 0x00A0, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__UART1_RTS_B,	0x03B4, 0x00A0, 4, 0x091C, 1, 0)
+MX6_PAD_DECL(EIM_D20__GPIO3_IO20,	0x03B4, 0x00A0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D20__EPIT2_OUT,	0x03B4, 0x00A0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__EIM_DATA21,	0x03B8, 0x00A4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__ECSPI4_SCLK,	0x03B8, 0x00A4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__IPU1_DI0_PIN17,	0x03B8, 0x00A4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__IPU2_CSI1_DATA11,	0x03B8, 0x00A4, 3, 0x08B4, 0, 0)
+MX6_PAD_DECL(EIM_D21__USB_OTG_OC,	0x03B8, 0x00A4, 4, 0x0944, 0, 0)
+MX6_PAD_DECL(EIM_D21__GPIO3_IO21,	0x03B8, 0x00A4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D21__I2C1_SCL,	0x03B8, 0x00A4, 22, 0x0898, 0, 0)
+MX6_PAD_DECL(EIM_D21__SPDIF_IN,	0x03B8, 0x00A4, 7, 0x0914, 0, 0)
+MX6_PAD_DECL(EIM_D22__EIM_DATA22,	0x03BC, 0x00A8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__ECSPI4_MISO,	0x03BC, 0x00A8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__IPU1_DI0_PIN01,	0x03BC, 0x00A8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__IPU2_CSI1_DATA10,	0x03BC, 0x00A8, 3, 0x08B0, 0, 0)
+MX6_PAD_DECL(EIM_D22__USB_OTG_PWR,	0x03BC, 0x00A8, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__GPIO3_IO22,	0x03BC, 0x00A8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D22__SPDIF_OUT,	0x03BC, 0x00A8, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__EIM_DATA23,	0x03C0, 0x00AC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__IPU1_DI0_D0_CS,	0x03C0, 0x00AC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__UART3_CTS_B,	0x03C0, 0x00AC, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__UART3_RTS_B,	0x03C0, 0x00AC, 2, 0x092C, 0, 0)
+MX6_PAD_DECL(EIM_D23__UART1_DCD_B,	0x03C0, 0x00AC, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__IPU2_CSI1_DATA_EN,	0x03C0, 0x00AC, 4, 0x08D8, 0, 0)
+MX6_PAD_DECL(EIM_D23__GPIO3_IO23,	0x03C0, 0x00AC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__IPU1_DI1_PIN02,	0x03C0, 0x00AC, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D23__IPU1_DI1_PIN14,	0x03C0, 0x00AC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__EIM_EB3_B,	0x03C4, 0x00B0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__ECSPI4_RDY,	0x03C4, 0x00B0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__UART3_CTS_B,	0x03C4, 0x00B0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__UART3_RTS_B,	0x03C4, 0x00B0, 2, 0x092C, 1, 0)
+MX6_PAD_DECL(EIM_EB3__UART1_RI_B,	0x03C4, 0x00B0, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__IPU2_CSI1_HSYNC,	0x03C4, 0x00B0, 4, 0x08DC, 0, 0)
+MX6_PAD_DECL(EIM_EB3__GPIO2_IO31,	0x03C4, 0x00B0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__IPU1_DI1_PIN03,	0x03C4, 0x00B0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB3__SRC_BOOT_CFG31,	0x03C4, 0x00B0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__EIM_DATA24,	0x03C8, 0x00B4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__ECSPI4_SS2,	0x03C8, 0x00B4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__UART3_TX_DATA,	0x03C8, 0x00B4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__UART3_RX_DATA,	0x03C8, 0x00B4, 2, 0x0930, 0, 0)
+MX6_PAD_DECL(EIM_D24__ECSPI1_SS2,	0x03C8, 0x00B4, 3, 0x0808, 0, 0)
+MX6_PAD_DECL(EIM_D24__ECSPI2_SS2,	0x03C8, 0x00B4, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__GPIO3_IO24,	0x03C8, 0x00B4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D24__AUD5_RXFS,	0x03C8, 0x00B4, 6, 0x07D8, 0, 0)
+MX6_PAD_DECL(EIM_D24__UART1_DTR_B,	0x03C8, 0x00B4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__EIM_DATA25,	0x03CC, 0x00B8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__ECSPI4_SS3,	0x03CC, 0x00B8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__UART3_TX_DATA,	0x03CC, 0x00B8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__UART3_RX_DATA,	0x03CC, 0x00B8, 2, 0x0930, 1, 0)
+MX6_PAD_DECL(EIM_D25__ECSPI1_SS3,	0x03CC, 0x00B8, 3, 0x080C, 0, 0)
+MX6_PAD_DECL(EIM_D25__ECSPI2_SS3,	0x03CC, 0x00B8, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__GPIO3_IO25,	0x03CC, 0x00B8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D25__AUD5_RXC,	0x03CC, 0x00B8, 6, 0x07D4, 0, 0)
+MX6_PAD_DECL(EIM_D25__UART1_DSR_B,	0x03CC, 0x00B8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__EIM_DATA26,	0x03D0, 0x00BC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_DI1_PIN11,	0x03D0, 0x00BC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_CSI0_DATA01,	0x03D0, 0x00BC, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU2_CSI1_DATA14,	0x03D0, 0x00BC, 3, 0x08C0, 0, 0)
+MX6_PAD_DECL(EIM_D26__UART2_TX_DATA,	0x03D0, 0x00BC, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__UART2_RX_DATA,	0x03D0, 0x00BC, 4, 0x0928, 0, 0)
+MX6_PAD_DECL(EIM_D26__GPIO3_IO26,	0x03D0, 0x00BC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_SISG2,	0x03D0, 0x00BC, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D26__IPU1_DISP1_DATA22,	0x03D0, 0x00BC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__EIM_DATA27,	0x03D4, 0x00C0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_DI1_PIN13,	0x03D4, 0x00C0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_CSI0_DATA00,	0x03D4, 0x00C0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU2_CSI1_DATA13,	0x03D4, 0x00C0, 3, 0x08BC, 0, 0)
+MX6_PAD_DECL(EIM_D27__UART2_TX_DATA,	0x03D4, 0x00C0, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__UART2_RX_DATA,	0x03D4, 0x00C0, 4, 0x0928, 1, 0)
+MX6_PAD_DECL(EIM_D27__GPIO3_IO27,	0x03D4, 0x00C0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_SISG3,	0x03D4, 0x00C0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D27__IPU1_DISP1_DATA23,	0x03D4, 0x00C0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__EIM_DATA28,	0x03D8, 0x00C4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__I2C1_SDA,	0x03D8, 0x00C4, 17, 0x089C, 0, 0)
+MX6_PAD_DECL(EIM_D28__ECSPI4_MOSI,	0x03D8, 0x00C4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__IPU2_CSI1_DATA12,	0x03D8, 0x00C4, 3, 0x08B8, 0, 0)
+MX6_PAD_DECL(EIM_D28__UART2_DTE_CTS_B,	0x03D8, 0x00C4, 4, 0x0924, 0, 0)
+MX6_PAD_DECL(EIM_D28__UART2_DTE_RTS_B,	0x03D8, 0x00C4, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__GPIO3_IO28,	0x03D8, 0x00C4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__IPU1_EXT_TRIG,	0x03D8, 0x00C4, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D28__IPU1_DI0_PIN13,	0x03D8, 0x00C4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__EIM_DATA29,	0x03DC, 0x00C8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__IPU1_DI1_PIN15,	0x03DC, 0x00C8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__ECSPI4_SS0,	0x03DC, 0x00C8, 2, 0x0824, 1, 0)
+MX6_PAD_DECL(EIM_D29__UART2_CTS_B,	0x03DC, 0x00C8, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__UART2_RTS_B,	0x03DC, 0x00C8, 4, 0x0924, 1, 0)
+MX6_PAD_DECL(EIM_D29__GPIO3_IO29,	0x03DC, 0x00C8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D29__IPU2_CSI1_VSYNC,	0x03DC, 0x00C8, 6, 0x08E4, 0, 0)
+MX6_PAD_DECL(EIM_D29__IPU1_DI0_PIN14,	0x03DC, 0x00C8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__EIM_DATA30,	0x03E0, 0x00CC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__IPU1_DISP1_DATA21,	0x03E0, 0x00CC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__IPU1_DI0_PIN11,	0x03E0, 0x00CC, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__IPU1_CSI0_DATA03,	0x03E0, 0x00CC, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__UART3_CTS_B,	0x03E0, 0x00CC, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__UART3_RTS_B,	0x03E0, 0x00CC, 4, 0x092C, 2, 0)
+MX6_PAD_DECL(EIM_D30__GPIO3_IO30,	0x03E0, 0x00CC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D30__USB_H1_OC,	0x03E0, 0x00CC, 6, 0x0948, 0, 0)
+MX6_PAD_DECL(EIM_D31__EIM_DATA31,	0x03E4, 0x00D0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__IPU1_DISP1_DATA20,	0x03E4, 0x00D0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__IPU1_DI0_PIN12,	0x03E4, 0x00D0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__IPU1_CSI0_DATA02,	0x03E4, 0x00D0, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__UART3_CTS_B,	0x03E4, 0x00D0, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__UART3_RTS_B,	0x03E4, 0x00D0, 4, 0x092C, 3, 0)
+MX6_PAD_DECL(EIM_D31__GPIO3_IO31,	0x03E4, 0x00D0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_D31__USB_H1_PWR,	0x03E4, 0x00D0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__EIM_ADDR24,	0x03E8, 0x00D4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__IPU1_DISP1_DATA19,	0x03E8, 0x00D4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__IPU2_CSI1_DATA19,	0x03E8, 0x00D4, 2, 0x08D4, 1, 0)
+MX6_PAD_DECL(EIM_A24__IPU2_SISG2,	0x03E8, 0x00D4, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__IPU1_SISG2,	0x03E8, 0x00D4, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__GPIO5_IO04,	0x03E8, 0x00D4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A24__SRC_BOOT_CFG24,	0x03E8, 0x00D4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__EIM_ADDR23,	0x03EC, 0x00D8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__IPU1_DISP1_DATA18,	0x03EC, 0x00D8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__IPU2_CSI1_DATA18,	0x03EC, 0x00D8, 2, 0x08D0, 1, 0)
+MX6_PAD_DECL(EIM_A23__IPU2_SISG3,	0x03EC, 0x00D8, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__IPU1_SISG3,	0x03EC, 0x00D8, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__GPIO6_IO06,	0x03EC, 0x00D8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A23__SRC_BOOT_CFG23,	0x03EC, 0x00D8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__EIM_ADDR22,	0x03F0, 0x00DC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__IPU1_DISP1_DATA17,	0x03F0, 0x00DC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__IPU2_CSI1_DATA17,	0x03F0, 0x00DC, 2, 0x08CC, 1, 0)
+MX6_PAD_DECL(EIM_A22__GPIO2_IO16,	0x03F0, 0x00DC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A22__SRC_BOOT_CFG22,	0x03F0, 0x00DC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__EIM_ADDR21,	0x03F4, 0x00E0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__IPU1_DISP1_DATA16,	0x03F4, 0x00E0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__IPU2_CSI1_DATA16,	0x03F4, 0x00E0, 2, 0x08C8, 1, 0)
+MX6_PAD_DECL(EIM_A21__GPIO2_IO17,	0x03F4, 0x00E0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A21__SRC_BOOT_CFG21,	0x03F4, 0x00E0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__EIM_ADDR20,	0x03F8, 0x00E4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__IPU1_DISP1_DATA15,	0x03F8, 0x00E4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__IPU2_CSI1_DATA15,	0x03F8, 0x00E4, 2, 0x08C4, 1, 0)
+MX6_PAD_DECL(EIM_A20__GPIO2_IO18,	0x03F8, 0x00E4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A20__SRC_BOOT_CFG20,	0x03F8, 0x00E4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__EIM_ADDR19,	0x03FC, 0x00E8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__IPU1_DISP1_DATA14,	0x03FC, 0x00E8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__IPU2_CSI1_DATA14,	0x03FC, 0x00E8, 2, 0x08C0, 1, 0)
+MX6_PAD_DECL(EIM_A19__GPIO2_IO19,	0x03FC, 0x00E8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A19__SRC_BOOT_CFG19,	0x03FC, 0x00E8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__EIM_ADDR18,	0x0400, 0x00EC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__IPU1_DISP1_DATA13,	0x0400, 0x00EC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__IPU2_CSI1_DATA13,	0x0400, 0x00EC, 2, 0x08BC, 1, 0)
+MX6_PAD_DECL(EIM_A18__GPIO2_IO20,	0x0400, 0x00EC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A18__SRC_BOOT_CFG18,	0x0400, 0x00EC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__EIM_ADDR17,	0x0404, 0x00F0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__IPU1_DISP1_DATA12,	0x0404, 0x00F0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__IPU2_CSI1_DATA12,	0x0404, 0x00F0, 2, 0x08B8, 1, 0)
+MX6_PAD_DECL(EIM_A17__GPIO2_IO21,	0x0404, 0x00F0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A17__SRC_BOOT_CFG17,	0x0404, 0x00F0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__EIM_ADDR16,	0x0408, 0x00F4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__IPU1_DI1_DISP_CLK,	0x0408, 0x00F4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__IPU2_CSI1_PIXCLK,	0x0408, 0x00F4, 2, 0x08E0, 1, 0)
+MX6_PAD_DECL(EIM_A16__GPIO2_IO22,	0x0408, 0x00F4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_A16__SRC_BOOT_CFG16,	0x0408, 0x00F4, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS0__EIM_CS0_B,	0x040C, 0x00F8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS0__IPU1_DI1_PIN05,	0x040C, 0x00F8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS0__ECSPI2_SCLK,	0x040C, 0x00F8, 2, 0x0810, 0, 0)
+MX6_PAD_DECL(EIM_CS0__GPIO2_IO23,	0x040C, 0x00F8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS1__EIM_CS1_B,	0x0410, 0x00FC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS1__IPU1_DI1_PIN06,	0x0410, 0x00FC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_CS1__ECSPI2_MOSI,	0x0410, 0x00FC, 2, 0x0818, 0, 0)
+MX6_PAD_DECL(EIM_CS1__GPIO2_IO24,	0x0410, 0x00FC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_OE__EIM_OE_B,	0x0414, 0x0100, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_OE__IPU1_DI1_PIN07,	0x0414, 0x0100, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_OE__ECSPI2_MISO,	0x0414, 0x0100, 2, 0x0814, 0, 0)
+MX6_PAD_DECL(EIM_OE__GPIO2_IO25,	0x0414, 0x0100, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__EIM_RW,	0x0418, 0x0104, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__IPU1_DI1_PIN08,	0x0418, 0x0104, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__ECSPI2_SS0,	0x0418, 0x0104, 2, 0x081C, 0, 0)
+MX6_PAD_DECL(EIM_RW__GPIO2_IO26,	0x0418, 0x0104, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_RW__SRC_BOOT_CFG29,	0x0418, 0x0104, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__EIM_LBA_B,	0x041C, 0x0108, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__IPU1_DI1_PIN17,	0x041C, 0x0108, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__ECSPI2_SS1,	0x041C, 0x0108, 2, 0x0820, 0, 0)
+MX6_PAD_DECL(EIM_LBA__GPIO2_IO27,	0x041C, 0x0108, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_LBA__SRC_BOOT_CFG26,	0x041C, 0x0108, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__EIM_EB0_B,	0x0420, 0x010C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__IPU1_DISP1_DATA11,	0x0420, 0x010C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__IPU2_CSI1_DATA11,	0x0420, 0x010C, 2, 0x08B4, 1, 0)
+MX6_PAD_DECL(EIM_EB0__CCM_PMIC_READY,	0x0420, 0x010C, 4, 0x07F0, 0, 0)
+MX6_PAD_DECL(EIM_EB0__GPIO2_IO28,	0x0420, 0x010C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB0__SRC_BOOT_CFG27,	0x0420, 0x010C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__EIM_EB1_B,	0x0424, 0x0110, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__IPU1_DISP1_DATA10,	0x0424, 0x0110, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__IPU2_CSI1_DATA10,	0x0424, 0x0110, 2, 0x08B0, 1, 0)
+MX6_PAD_DECL(EIM_EB1__GPIO2_IO29,	0x0424, 0x0110, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_EB1__SRC_BOOT_CFG28,	0x0424, 0x0110, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__EIM_AD00,	0x0428, 0x0114, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__IPU1_DISP1_DATA09,	0x0428, 0x0114, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__IPU2_CSI1_DATA09,	0x0428, 0x0114, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__GPIO3_IO00,	0x0428, 0x0114, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA0__SRC_BOOT_CFG00,	0x0428, 0x0114, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__EIM_AD01,	0x042C, 0x0118, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__IPU1_DISP1_DATA08,	0x042C, 0x0118, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__IPU2_CSI1_DATA08,	0x042C, 0x0118, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__GPIO3_IO01,	0x042C, 0x0118, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA1__SRC_BOOT_CFG01,	0x042C, 0x0118, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__EIM_AD02,	0x0430, 0x011C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__IPU1_DISP1_DATA07,	0x0430, 0x011C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__IPU2_CSI1_DATA07,	0x0430, 0x011C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__GPIO3_IO02,	0x0430, 0x011C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA2__SRC_BOOT_CFG02,	0x0430, 0x011C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__EIM_AD03,	0x0434, 0x0120, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__IPU1_DISP1_DATA06,	0x0434, 0x0120, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__IPU2_CSI1_DATA06,	0x0434, 0x0120, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__GPIO3_IO03,	0x0434, 0x0120, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA3__SRC_BOOT_CFG03,	0x0434, 0x0120, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__EIM_AD04,	0x0438, 0x0124, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__IPU1_DISP1_DATA05,	0x0438, 0x0124, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__IPU2_CSI1_DATA05,	0x0438, 0x0124, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__GPIO3_IO04,	0x0438, 0x0124, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA4__SRC_BOOT_CFG04,	0x0438, 0x0124, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__EIM_AD05,	0x043C, 0x0128, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__IPU1_DISP1_DATA04,	0x043C, 0x0128, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__IPU2_CSI1_DATA04,	0x043C, 0x0128, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__GPIO3_IO05,	0x043C, 0x0128, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA5__SRC_BOOT_CFG05,	0x043C, 0x0128, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__EIM_AD06,	0x0440, 0x012C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__IPU1_DISP1_DATA03,	0x0440, 0x012C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__IPU2_CSI1_DATA03,	0x0440, 0x012C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__GPIO3_IO06,	0x0440, 0x012C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA6__SRC_BOOT_CFG06,	0x0440, 0x012C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__EIM_AD07,	0x0444, 0x0130, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__IPU1_DISP1_DATA02,	0x0444, 0x0130, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__IPU2_CSI1_DATA02,	0x0444, 0x0130, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__GPIO3_IO07,	0x0444, 0x0130, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA7__SRC_BOOT_CFG07,	0x0444, 0x0130, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__EIM_AD08,	0x0448, 0x0134, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__IPU1_DISP1_DATA01,	0x0448, 0x0134, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__IPU2_CSI1_DATA01,	0x0448, 0x0134, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__GPIO3_IO08,	0x0448, 0x0134, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA8__SRC_BOOT_CFG08,	0x0448, 0x0134, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__EIM_AD09,	0x044C, 0x0138, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__IPU1_DISP1_DATA00,	0x044C, 0x0138, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__IPU2_CSI1_DATA00,	0x044C, 0x0138, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__GPIO3_IO09,	0x044C, 0x0138, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA9__SRC_BOOT_CFG09,	0x044C, 0x0138, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__EIM_AD10,	0x0450, 0x013C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__IPU1_DI1_PIN15,	0x0450, 0x013C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__IPU2_CSI1_DATA_EN,	0x0450, 0x013C, 2, 0x08D8, 1, 0)
+MX6_PAD_DECL(EIM_DA10__GPIO3_IO10,	0x0450, 0x013C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA10__SRC_BOOT_CFG10,	0x0450, 0x013C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__EIM_AD11,	0x0454, 0x0140, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__IPU1_DI1_PIN02,	0x0454, 0x0140, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__IPU2_CSI1_HSYNC,	0x0454, 0x0140, 2, 0x08DC, 1, 0)
+MX6_PAD_DECL(EIM_DA11__GPIO3_IO11,	0x0454, 0x0140, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA11__SRC_BOOT_CFG11,	0x0454, 0x0140, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__EIM_AD12,	0x0458, 0x0144, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__IPU1_DI1_PIN03,	0x0458, 0x0144, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__IPU2_CSI1_VSYNC,	0x0458, 0x0144, 2, 0x08E4, 1, 0)
+MX6_PAD_DECL(EIM_DA12__GPIO3_IO12,	0x0458, 0x0144, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA12__SRC_BOOT_CFG12,	0x0458, 0x0144, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__EIM_AD13,	0x045C, 0x0148, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__IPU1_DI1_D0_CS,	0x045C, 0x0148, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__GPIO3_IO13,	0x045C, 0x0148, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA13__SRC_BOOT_CFG13,	0x045C, 0x0148, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__EIM_AD14,	0x0460, 0x014C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__IPU1_DI1_D1_CS,	0x0460, 0x014C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__GPIO3_IO14,	0x0460, 0x014C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA14__SRC_BOOT_CFG14,	0x0460, 0x014C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__EIM_AD15,	0x0464, 0x0150, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__IPU1_DI1_PIN01,	0x0464, 0x0150, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__IPU1_DI1_PIN04,	0x0464, 0x0150, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__GPIO3_IO15,	0x0464, 0x0150, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_DA15__SRC_BOOT_CFG15,	0x0464, 0x0150, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_WAIT__EIM_WAIT_B,	0x0468, 0x0154, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_WAIT__EIM_DTACK_B,	0x0468, 0x0154, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_WAIT__GPIO5_IO00,	0x0468, 0x0154, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_WAIT__SRC_BOOT_CFG25,	0x0468, 0x0154, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_BCLK__EIM_BCLK,	0x046C, 0x0158, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_BCLK__IPU1_DI1_PIN16,	0x046C, 0x0158, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(EIM_BCLK__GPIO6_IO31,	0x046C, 0x0158, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_DISP_CLK__IPU1_DI0_DISP_CLK,	0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_DISP_CLK__IPU2_DI0_DISP_CLK,	0x0470, 0x015C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_DISP_CLK__GPIO4_IO16,	0x0470, 0x015C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN15__IPU1_DI0_PIN15,	0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_PIN15__IPU2_DI0_PIN15,	0x0474, 0x0160, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN15__AUD6_TXC,	0x0474, 0x0160, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN15__GPIO4_IO17,	0x0474, 0x0160, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN2__IPU1_DI0_PIN02,	0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_PIN2__IPU2_DI0_PIN02,	0x0478, 0x0164, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN2__AUD6_TXD,	0x0478, 0x0164, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN2__GPIO4_IO18,	0x0478, 0x0164, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN3__IPU1_DI0_PIN03,	0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DI0_PIN3__IPU2_DI0_PIN03,	0x047C, 0x0168, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN3__AUD6_TXFS,	0x047C, 0x0168, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN3__GPIO4_IO19,	0x047C, 0x0168, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__IPU1_DI0_PIN04,	0x0480, 0x016C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__IPU2_DI0_PIN04,	0x0480, 0x016C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__AUD6_RXD,	0x0480, 0x016C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__SD1_WP,	0x0480, 0x016C, 3, 0x094C, 0, 0)
+MX6_PAD_DECL(DI0_PIN4__GPIO4_IO20,	0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT0__IPU1_DISP0_DATA00,	0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT0__IPU2_DISP0_DATA00,	0x0484, 0x0170, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT0__ECSPI3_SCLK,	0x0484, 0x0170, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT0__GPIO4_IO21,	0x0484, 0x0170, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT1__IPU1_DISP0_DATA01,	0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT1__IPU2_DISP0_DATA01,	0x0488, 0x0174, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT1__ECSPI3_MOSI,	0x0488, 0x0174, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT1__GPIO4_IO22,	0x0488, 0x0174, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT2__IPU1_DISP0_DATA02,	0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT2__IPU2_DISP0_DATA02,	0x048C, 0x0178, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT2__ECSPI3_MISO,	0x048C, 0x0178, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT2__GPIO4_IO23,	0x048C, 0x0178, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT3__IPU1_DISP0_DATA03,	0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT3__IPU2_DISP0_DATA03,	0x0490, 0x017C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT3__ECSPI3_SS0,	0x0490, 0x017C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT3__GPIO4_IO24,	0x0490, 0x017C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT4__IPU1_DISP0_DATA04,	0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT4__IPU2_DISP0_DATA04,	0x0494, 0x0180, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT4__ECSPI3_SS1,	0x0494, 0x0180, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT4__GPIO4_IO25,	0x0494, 0x0180, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT5__IPU1_DISP0_DATA05,	0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT5__IPU2_DISP0_DATA05,	0x0498, 0x0184, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT5__ECSPI3_SS2,	0x0498, 0x0184, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT5__AUD6_RXFS,	0x0498, 0x0184, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT5__GPIO4_IO26,	0x0498, 0x0184, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT6__IPU1_DISP0_DATA06,	0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT6__IPU2_DISP0_DATA06,	0x049C, 0x0188, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT6__ECSPI3_SS3,	0x049C, 0x0188, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT6__AUD6_RXC,	0x049C, 0x0188, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT6__GPIO4_IO27,	0x049C, 0x0188, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT7__IPU1_DISP0_DATA07,	0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT7__IPU2_DISP0_DATA07,	0x04A0, 0x018C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT7__ECSPI3_RDY,	0x04A0, 0x018C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT7__GPIO4_IO28,	0x04A0, 0x018C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT8__IPU1_DISP0_DATA08,	0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT8__IPU2_DISP0_DATA08,	0x04A4, 0x0190, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT8__PWM1_OUT,	0x04A4, 0x0190, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT8__WDOG1_B,	0x04A4, 0x0190, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT8__GPIO4_IO29,	0x04A4, 0x0190, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT9__IPU1_DISP0_DATA09,	0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT9__IPU2_DISP0_DATA09,	0x04A8, 0x0194, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT9__PWM2_OUT,	0x04A8, 0x0194, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT9__WDOG2_B,	0x04A8, 0x0194, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT9__GPIO4_IO30,	0x04A8, 0x0194, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT10__IPU1_DISP0_DATA10,	0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT10__IPU2_DISP0_DATA10,	0x04AC, 0x0198, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT10__GPIO4_IO31,	0x04AC, 0x0198, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT11__IPU1_DISP0_DATA11,	0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT11__IPU2_DISP0_DATA11,	0x04B0, 0x019C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT11__GPIO5_IO05,	0x04B0, 0x019C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT12__IPU1_DISP0_DATA12,	0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT12__IPU2_DISP0_DATA12,	0x04B4, 0x01A0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT12__GPIO5_IO06,	0x04B4, 0x01A0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT13__IPU1_DISP0_DATA13,	0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT13__IPU2_DISP0_DATA13,	0x04B8, 0x01A4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT13__AUD5_RXFS,	0x04B8, 0x01A4, 3, 0x07D8, 1, 0)
+MX6_PAD_DECL(DISP0_DAT13__GPIO5_IO07,	0x04B8, 0x01A4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT14__IPU1_DISP0_DATA14,	0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT14__IPU2_DISP0_DATA14,	0x04BC, 0x01A8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT14__AUD5_RXC,	0x04BC, 0x01A8, 3, 0x07D4, 1, 0)
+MX6_PAD_DECL(DISP0_DAT14__GPIO5_IO08,	0x04BC, 0x01A8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT15__IPU1_DISP0_DATA15,	0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT15__IPU2_DISP0_DATA15,	0x04C0, 0x01AC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT15__ECSPI1_SS1,	0x04C0, 0x01AC, 2, 0x0804, 1, 0)
+MX6_PAD_DECL(DISP0_DAT15__ECSPI2_SS1,	0x04C0, 0x01AC, 3, 0x0820, 1, 0)
+MX6_PAD_DECL(DISP0_DAT15__GPIO5_IO09,	0x04C0, 0x01AC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT16__IPU1_DISP0_DATA16,	0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT16__IPU2_DISP0_DATA16,	0x04C4, 0x01B0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT16__ECSPI2_MOSI,	0x04C4, 0x01B0, 2, 0x0818, 1, 0)
+MX6_PAD_DECL(DISP0_DAT16__AUD5_TXC,	0x04C4, 0x01B0, 3, 0x07DC, 0, 0)
+MX6_PAD_DECL(DISP0_DAT16__SDMA_EXT_EVENT0,	0x04C4, 0x01B0, 4, 0x090C, 0, 0)
+MX6_PAD_DECL(DISP0_DAT16__GPIO5_IO10,	0x04C4, 0x01B0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT17__IPU1_DISP0_DATA17,	0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT17__IPU2_DISP0_DATA17,	0x04C8, 0x01B4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT17__ECSPI2_MISO,	0x04C8, 0x01B4, 2, 0x0814, 1, 0)
+MX6_PAD_DECL(DISP0_DAT17__AUD5_TXD,	0x04C8, 0x01B4, 3, 0x07D0, 0, 0)
+MX6_PAD_DECL(DISP0_DAT17__SDMA_EXT_EVENT1,	0x04C8, 0x01B4, 4, 0x0910, 0, 0)
+MX6_PAD_DECL(DISP0_DAT17__GPIO5_IO11,	0x04C8, 0x01B4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__IPU1_DISP0_DATA18,	0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT18__IPU2_DISP0_DATA18,	0x04CC, 0x01B8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__ECSPI2_SS0,	0x04CC, 0x01B8, 2, 0x081C, 1, 0)
+MX6_PAD_DECL(DISP0_DAT18__AUD5_TXFS,	0x04CC, 0x01B8, 3, 0x07E0, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__AUD4_RXFS,	0x04CC, 0x01B8, 4, 0x07C0, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__GPIO5_IO12,	0x04CC, 0x01B8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT18__EIM_CS2_B,	0x04CC, 0x01B8, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__IPU1_DISP0_DATA19,	0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT19__IPU2_DISP0_DATA19,	0x04D0, 0x01BC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__ECSPI2_SCLK,	0x04D0, 0x01BC, 2, 0x0810, 1, 0)
+MX6_PAD_DECL(DISP0_DAT19__AUD5_RXD,	0x04D0, 0x01BC, 3, 0x07CC, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__AUD4_RXC,	0x04D0, 0x01BC, 4, 0x07BC, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__GPIO5_IO13,	0x04D0, 0x01BC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT19__EIM_CS3_B,	0x04D0, 0x01BC, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT20__IPU1_DISP0_DATA20,	0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT20__IPU2_DISP0_DATA20,	0x04D4, 0x01C0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT20__ECSPI1_SCLK,	0x04D4, 0x01C0, 2, 0x07F4, 1, 0)
+MX6_PAD_DECL(DISP0_DAT20__AUD4_TXC,	0x04D4, 0x01C0, 3, 0x07C4, 0, 0)
+MX6_PAD_DECL(DISP0_DAT20__GPIO5_IO14,	0x04D4, 0x01C0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT21__IPU1_DISP0_DATA21,	0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT21__IPU2_DISP0_DATA21,	0x04D8, 0x01C4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT21__ECSPI1_MOSI,	0x04D8, 0x01C4, 2, 0x07FC, 1, 0)
+MX6_PAD_DECL(DISP0_DAT21__AUD4_TXD,	0x04D8, 0x01C4, 3, 0x07B8, 1, 0)
+MX6_PAD_DECL(DISP0_DAT21__GPIO5_IO15,	0x04D8, 0x01C4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT22__IPU1_DISP0_DATA22,	0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT22__IPU2_DISP0_DATA22,	0x04DC, 0x01C8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT22__ECSPI1_MISO,	0x04DC, 0x01C8, 2, 0x07F8, 1, 0)
+MX6_PAD_DECL(DISP0_DAT22__AUD4_TXFS,	0x04DC, 0x01C8, 3, 0x07C8, 1, 0)
+MX6_PAD_DECL(DISP0_DAT22__GPIO5_IO16,	0x04DC, 0x01C8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT23__IPU1_DISP0_DATA23,	0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
+MX6_PAD_DECL(DISP0_DAT23__IPU2_DISP0_DATA23,	0x04E0, 0x01CC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(DISP0_DAT23__ECSPI1_SS0,	0x04E0, 0x01CC, 2, 0x0800, 1, 0)
+MX6_PAD_DECL(DISP0_DAT23__AUD4_RXD,	0x04E0, 0x01CC, 3, 0x07B4, 1, 0)
+MX6_PAD_DECL(DISP0_DAT23__GPIO5_IO17,	0x04E0, 0x01CC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__ENET_MDIO,	0x04E4, 0x01D0, 1, 0x0840, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__ESAI_RX_CLK,	0x04E4, 0x01D0, 2, 0x086C, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__ENET_1588_EVENT1_OUT,	0x04E4, 0x01D0, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__GPIO1_IO22,	0x04E4, 0x01D0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDIO__SPDIF_LOCK,	0x04E4, 0x01D0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK,	0x04E8, 0x01D4, 1 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__ESAI_RX_FS,	0x04E8, 0x01D4, 2, 0x085C, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__GPIO1_IO23,	0x04E8, 0x01D4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__SPDIF_SR_CLK,	0x04E8, 0x01D4, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__USB_OTG_ID,	0x04EC, 0x01D8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__ENET_RX_ER,	0x04EC, 0x01D8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__ESAI_RX_HF_CLK,	0x04EC, 0x01D8, 2, 0x0864, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__SPDIF_IN,	0x04EC, 0x01D8, 3, 0x0914, 1, 0)
+MX6_PAD_DECL(ENET_RX_ER__ENET_1588_EVENT2_OUT,	0x04EC, 0x01D8, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RX_ER__GPIO1_IO24,	0x04EC, 0x01D8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_CRS_DV__ENET_RX_EN,	0x04F0, 0x01DC, 1, 0x0858, 1, 0)
+MX6_PAD_DECL(ENET_CRS_DV__ESAI_TX_CLK,	0x04F0, 0x01DC, 2, 0x0870, 0, 0)
+MX6_PAD_DECL(ENET_CRS_DV__SPDIF_EXT_CLK,	0x04F0, 0x01DC, 3, 0x0918, 1, 0)
+MX6_PAD_DECL(ENET_CRS_DV__GPIO1_IO25,	0x04F0, 0x01DC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__MLB_SIG,	0x04F4, 0x01E0, 0, 0x0908, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__ENET_RX_DATA1,	0x04F4, 0x01E0, 1, 0x084C, 1, 0)
+MX6_PAD_DECL(ENET_RXD1__ESAI_TX_FS,	0x04F4, 0x01E0, 2, 0x0860, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__ENET_1588_EVENT3_OUT,	0x04F4, 0x01E0, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RXD1__GPIO1_IO26,	0x04F4, 0x01E0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RXD0__ENET_RX_DATA0,	0x04F8, 0x01E4, 1, 0x0848, 1, 0)
+MX6_PAD_DECL(ENET_RXD0__ESAI_TX_HF_CLK,	0x04F8, 0x01E4, 2, 0x0868, 0, 0)
+MX6_PAD_DECL(ENET_RXD0__SPDIF_OUT,	0x04F8, 0x01E4, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_RXD0__GPIO1_IO27,	0x04F8, 0x01E4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TX_EN__ENET_TX_EN,	0x04FC, 0x01E8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TX_EN__ESAI_TX3_RX2,	0x04FC, 0x01E8, 2, 0x0880, 0, 0)
+MX6_PAD_DECL(ENET_TX_EN__GPIO1_IO28,	0x04FC, 0x01E8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__MLB_CLK,	0x0500, 0x01EC, 0, 0x0900, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__ENET_TX_DATA1,	0x0500, 0x01EC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__ESAI_TX2_RX3,	0x0500, 0x01EC, 2, 0x087C, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__ENET_1588_EVENT0_IN,	0x0500, 0x01EC, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD1__GPIO1_IO29,	0x0500, 0x01EC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD0__ENET_TX_DATA0,	0x0504, 0x01F0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_TXD0__ESAI_TX4_RX1,	0x0504, 0x01F0, 2, 0x0884, 0, 0)
+MX6_PAD_DECL(ENET_TXD0__GPIO1_IO30,	0x0504, 0x01F0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDC__MLB_DATA,	0x0508, 0x01F4, 0, 0x0904, 0, 0)
+MX6_PAD_DECL(ENET_MDC__ENET_MDC,	0x0508, 0x01F4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDC__ESAI_TX5_RX0,	0x0508, 0x01F4, 2, 0x0888, 0, 0)
+MX6_PAD_DECL(ENET_MDC__ENET_1588_EVENT1_IN,	0x0508, 0x01F4, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_MDC__GPIO1_IO31,	0x0508, 0x01F4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL0__ECSPI1_SCLK,	0x05C8, 0x01F8, 0, 0x07F4, 2, 0)
+MX6_PAD_DECL(KEY_COL0__ENET_RX_DATA3,	0x05C8, 0x01F8, 1, 0x0854, 1, 0)
+MX6_PAD_DECL(KEY_COL0__AUD5_TXC,	0x05C8, 0x01F8, 2, 0x07DC, 1, 0)
+MX6_PAD_DECL(KEY_COL0__KEY_COL0,	0x05C8, 0x01F8, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL0__UART4_TX_DATA,	0x05C8, 0x01F8, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL0__UART4_RX_DATA,	0x05C8, 0x01F8, 4, 0x0938, 0, 0)
+MX6_PAD_DECL(KEY_COL0__GPIO4_IO06,	0x05C8, 0x01F8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL0__DCIC1_OUT,	0x05C8, 0x01F8, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__ECSPI1_MOSI,	0x05CC, 0x01FC, 0, 0x07FC, 2, 0)
+MX6_PAD_DECL(KEY_ROW0__ENET_TX_DATA3,	0x05CC, 0x01FC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__AUD5_TXD,	0x05CC, 0x01FC, 2, 0x07D0, 1, 0)
+MX6_PAD_DECL(KEY_ROW0__KEY_ROW0,	0x05CC, 0x01FC, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__UART4_TX_DATA,	0x05CC, 0x01FC, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__UART4_RX_DATA,	0x05CC, 0x01FC, 4, 0x0938, 1, 0)
+MX6_PAD_DECL(KEY_ROW0__GPIO4_IO07,	0x05CC, 0x01FC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW0__DCIC2_OUT,	0x05CC, 0x01FC, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL1__ECSPI1_MISO,	0x05D0, 0x0200, 0, 0x07F8, 2, 0)
+MX6_PAD_DECL(KEY_COL1__ENET_MDIO,	0x05D0, 0x0200, 1, 0x0840, 1, 0)
+MX6_PAD_DECL(KEY_COL1__AUD5_TXFS,	0x05D0, 0x0200, 2, 0x07E0, 1, 0)
+MX6_PAD_DECL(KEY_COL1__KEY_COL1,	0x05D0, 0x0200, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL1__UART5_TX_DATA,	0x05D0, 0x0200, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL1__UART5_RX_DATA,	0x05D0, 0x0200, 4, 0x0940, 0, 0)
+MX6_PAD_DECL(KEY_COL1__GPIO4_IO08,	0x05D0, 0x0200, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL1__SD1_VSELECT,	0x05D0, 0x0200, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__ECSPI1_SS0,	0x05D4, 0x0204, 0, 0x0800, 2, 0)
+MX6_PAD_DECL(KEY_ROW1__ENET_COL,	0x05D4, 0x0204, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__AUD5_RXD,	0x05D4, 0x0204, 2, 0x07CC, 1, 0)
+MX6_PAD_DECL(KEY_ROW1__KEY_ROW1,	0x05D4, 0x0204, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__UART5_TX_DATA,	0x05D4, 0x0204, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__UART5_RX_DATA,	0x05D4, 0x0204, 4, 0x0940, 1, 0)
+MX6_PAD_DECL(KEY_ROW1__GPIO4_IO09,	0x05D4, 0x0204, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW1__SD2_VSELECT,	0x05D4, 0x0204, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__ECSPI1_SS1,	0x05D8, 0x0208, 0, 0x0804, 2, 0)
+MX6_PAD_DECL(KEY_COL2__ENET_RX_DATA2,	0x05D8, 0x0208, 1, 0x0850, 1, 0)
+MX6_PAD_DECL(KEY_COL2__FLEXCAN1_TX,	0x05D8, 0x0208, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__KEY_COL2,	0x05D8, 0x0208, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__ENET_MDC,	0x05D8, 0x0208, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__GPIO4_IO10,	0x05D8, 0x0208, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL2__USB_H1_PWR_CTL_WAKE,	0x05D8, 0x0208, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__ECSPI1_SS2,	0x05DC, 0x020C, 0, 0x0808, 1, 0)
+MX6_PAD_DECL(KEY_ROW2__ENET_TX_DATA2,	0x05DC, 0x020C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__FLEXCAN1_RX,	0x05DC, 0x020C, 2, 0x07E4, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__KEY_ROW2,	0x05DC, 0x020C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__SD2_VSELECT,	0x05DC, 0x020C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__GPIO4_IO11,	0x05DC, 0x020C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW2__HDMI_TX_CEC_LINE,	0x05DC, 0x020C, 6, 0x088C, 1, 0)
+MX6_PAD_DECL(KEY_COL3__ECSPI1_SS3,	0x05E0, 0x0210, 0, 0x080C, 1, 0)
+MX6_PAD_DECL(KEY_COL3__ENET_CRS,	0x05E0, 0x0210, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL3__HDMI_TX_DDC_SCL,	0x05E0, 0x0210, 2, 0x0890, 1, 0)
+MX6_PAD_DECL(KEY_COL3__KEY_COL3,	0x05E0, 0x0210, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL3__I2C2_SCL,	0x05E0, 0x0210, 20, 0x08A0, 1, 0)
+MX6_PAD_DECL(KEY_COL3__GPIO4_IO12,	0x05E0, 0x0210, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL3__SPDIF_IN,	0x05E0, 0x0210, 6, 0x0914, 2, 0)
+MX6_PAD_DECL(KEY_ROW3__ASRC_EXT_CLK,	0x05E4, 0x0214, 1, 0x07B0, 0, 0)
+MX6_PAD_DECL(KEY_ROW3__HDMI_TX_DDC_SDA,	0x05E4, 0x0214, 2, 0x0894, 1, 0)
+MX6_PAD_DECL(KEY_ROW3__KEY_ROW3,	0x05E4, 0x0214, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW3__I2C2_SDA,	0x05E4, 0x0214, 20, 0x08A4, 1, 0)
+MX6_PAD_DECL(KEY_ROW3__GPIO4_IO13,	0x05E4, 0x0214, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW3__SD1_VSELECT,	0x05E4, 0x0214, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__FLEXCAN2_TX,	0x05E8, 0x0218, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__IPU1_SISG4,	0x05E8, 0x0218, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__USB_OTG_OC,	0x05E8, 0x0218, 2, 0x0944, 1, 0)
+MX6_PAD_DECL(KEY_COL4__KEY_COL4,	0x05E8, 0x0218, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__UART5_CTS_B,	0x05E8, 0x0218, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_COL4__UART5_RTS_B,	0x05E8, 0x0218, 4, 0x093C, 0, 0)
+MX6_PAD_DECL(KEY_COL4__GPIO4_IO14,	0x05E8, 0x0218, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__FLEXCAN2_RX,	0x05EC, 0x021C, 0, 0x07E8, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__IPU1_SISG5,	0x05EC, 0x021C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__USB_OTG_PWR,	0x05EC, 0x021C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__KEY_ROW4,	0x05EC, 0x021C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__UART5_CTS_B,	0x05EC, 0x021C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(KEY_ROW4__UART5_RTS_B,	0x05EC, 0x021C, 4, 0x093C, 1, 0)
+MX6_PAD_DECL(KEY_ROW4__GPIO4_IO15,	0x05EC, 0x021C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__CCM_CLKO1,	0x05F0, 0x0220, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__KEY_COL5,	0x05F0, 0x0220, 2, 0x08E8, 0, 0)
+MX6_PAD_DECL(GPIO_0__ASRC_EXT_CLK,	0x05F0, 0x0220, 3, 0x07B0, 1, 0)
+MX6_PAD_DECL(GPIO_0__EPIT1_OUT,	0x05F0, 0x0220, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__GPIO1_IO00,	0x05F0, 0x0220, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__USB_H1_PWR,	0x05F0, 0x0220, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_0__SNVS_VIO_5,	0x05F0, 0x0220, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__ESAI_RX_CLK,	0x05F4, 0x0224, 0, 0x086C, 1, 0)
+MX6_PAD_DECL(GPIO_1__WDOG2_B,	0x05F4, 0x0224, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__KEY_ROW5,	0x05F4, 0x0224, 2, 0x08F4, 0, 0)
+MX6_PAD_DECL(GPIO_1__USB_OTG_ID,	0x05F4, 0x0224, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__PWM2_OUT,	0x05F4, 0x0224, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__GPIO1_IO01,	0x05F4, 0x0224, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_1__SD1_CD_B,	0x05F4, 0x0224, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__ESAI_RX_FS,	0x05F8, 0x0228, 0, 0x085C, 1, 0)
+MX6_PAD_DECL(GPIO_9__WDOG1_B,	0x05F8, 0x0228, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__KEY_COL6,	0x05F8, 0x0228, 2, 0x08EC, 0, 0)
+MX6_PAD_DECL(GPIO_9__CCM_REF_EN_B,	0x05F8, 0x0228, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__PWM1_OUT,	0x05F8, 0x0228, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__GPIO1_IO09,	0x05F8, 0x0228, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_9__SD1_WP,	0x05F8, 0x0228, 6, 0x094C, 1, 0)
+MX6_PAD_DECL(GPIO_3__ESAI_RX_HF_CLK,	0x05FC, 0x022C, 0, 0x0864, 1, 0)
+MX6_PAD_DECL(GPIO_3__I2C3_SCL,	0x05FC, 0x022C, 18, 0x08A8, 1, 0)
+MX6_PAD_DECL(GPIO_3__XTALOSC_REF_CLK_24M,	0x05FC, 0x022C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_3__CCM_CLKO2,	0x05FC, 0x022C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_3__GPIO1_IO03,	0x05FC, 0x022C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_3__USB_H1_OC,	0x05FC, 0x022C, 6, 0x0948, 1, 0)
+MX6_PAD_DECL(GPIO_3__MLB_CLK,	0x05FC, 0x022C, 7, 0x0900, 1, 0)
+MX6_PAD_DECL(GPIO_6__ESAI_TX_CLK,	0x0600, 0x0230, 0, 0x0870, 1, 0)
+MX6_PAD_DECL(GPIO_6__I2C3_SDA,	0x0600, 0x0230, 18, 0x08AC, 1, 0)
+MX6_PAD_DECL(GPIO_6__GPIO1_IO06,	0x0600, 0x0230, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_6__SD2_LCTL,	0x0600, 0x0230, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_6__MLB_SIG,	0x0600, 0x0230, 7, 0x0908, 1, 0)
+MX6_PAD_DECL(GPIO_2__ESAI_TX_FS,	0x0604, 0x0234, 0, 0x0860, 1, 0)
+MX6_PAD_DECL(GPIO_2__KEY_ROW6,	0x0604, 0x0234, 2, 0x08F8, 1, 0)
+MX6_PAD_DECL(GPIO_2__GPIO1_IO02,	0x0604, 0x0234, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_2__SD2_WP,	0x0604, 0x0234, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_2__MLB_DATA,	0x0604, 0x0234, 7, 0x0904, 1, 0)
+MX6_PAD_DECL(GPIO_4__ESAI_TX_HF_CLK,	0x0608, 0x0238, 0, 0x0868, 1, 0)
+MX6_PAD_DECL(GPIO_4__KEY_COL7,	0x0608, 0x0238, 2, 0x08F0, 1, 0)
+MX6_PAD_DECL(GPIO_4__GPIO1_IO04,	0x0608, 0x0238, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_4__SD2_CD_B,	0x0608, 0x0238, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_5__ESAI_TX2_RX3,	0x060C, 0x023C, 0, 0x087C, 1, 0)
+MX6_PAD_DECL(GPIO_5__KEY_ROW7,	0x060C, 0x023C, 2, 0x08FC, 1, 0)
+MX6_PAD_DECL(GPIO_5__CCM_CLKO1,	0x060C, 0x023C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_5__GPIO1_IO05,	0x060C, 0x023C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_5__I2C3_SCL,	0x060C, 0x023C, 22, 0x08A8, 2, 0)
+MX6_PAD_DECL(GPIO_5__ARM_EVENTI,	0x060C, 0x023C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__ESAI_TX4_RX1,	0x0610, 0x0240, 0, 0x0884, 1, 0)
+MX6_PAD_DECL(GPIO_7__ECSPI5_RDY,	0x0610, 0x0240, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__EPIT1_OUT,	0x0610, 0x0240, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__FLEXCAN1_TX,	0x0610, 0x0240, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__UART2_TX_DATA,	0x0610, 0x0240, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__UART2_RX_DATA,	0x0610, 0x0240, 4, 0x0928, 2, 0)
+MX6_PAD_DECL(GPIO_7__GPIO1_IO07,	0x0610, 0x0240, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__SPDIF_LOCK,	0x0610, 0x0240, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_7__USB_OTG_HOST_MODE,	0x0610, 0x0240, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__ESAI_TX5_RX0,	0x0614, 0x0244, 0, 0x0888, 1, 0)
+MX6_PAD_DECL(GPIO_8__XTALOSC_REF_CLK_32K,	0x0614, 0x0244, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__EPIT2_OUT,	0x0614, 0x0244, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__FLEXCAN1_RX,	0x0614, 0x0244, 3, 0x07E4, 1, 0)
+MX6_PAD_DECL(GPIO_8__UART2_TX_DATA,	0x0614, 0x0244, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__UART2_RX_DATA,	0x0614, 0x0244, 4, 0x0928, 3, 0)
+MX6_PAD_DECL(GPIO_8__GPIO1_IO08,	0x0614, 0x0244, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__SPDIF_SR_CLK,	0x0614, 0x0244, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_8__USB_OTG_PWR_CTL_WAKE,	0x0614, 0x0244, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_16__ESAI_TX3_RX2,	0x0618, 0x0248, 0, 0x0880, 1, 0)
+MX6_PAD_DECL(GPIO_16__ENET_1588_EVENT2_IN,	0x0618, 0x0248, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_16__ENET_REF_CLK,	0x0618, 0x0248, 2 | IOMUX_CONFIG_SION, 0x083C, 1, 0)
+MX6_PAD_DECL(GPIO_16__SD1_LCTL,	0x0618, 0x0248, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_16__SPDIF_IN,	0x0618, 0x0248, 4, 0x0914, 3, 0)
+MX6_PAD_DECL(GPIO_16__GPIO7_IO11,	0x0618, 0x0248, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_16__I2C3_SDA,	0x0618, 0x0248, 22, 0x08AC, 2, 0)
+MX6_PAD_DECL(GPIO_16__JTAG_DE_B,	0x0618, 0x0248, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_17__ESAI_TX0,	0x061C, 0x024C, 0, 0x0874, 0, 0)
+MX6_PAD_DECL(GPIO_17__ENET_1588_EVENT3_IN,	0x061C, 0x024C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_17__CCM_PMIC_READY,	0x061C, 0x024C, 2, 0x07F0, 1, 0)
+MX6_PAD_DECL(GPIO_17__SDMA_EXT_EVENT0,	0x061C, 0x024C, 3, 0x090C, 1, 0)
+MX6_PAD_DECL(GPIO_17__SPDIF_OUT,	0x061C, 0x024C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_17__GPIO7_IO12,	0x061C, 0x024C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_18__ESAI_TX1,	0x0620, 0x0250, 0, 0x0878, 0, 0)
+MX6_PAD_DECL(GPIO_18__ENET_RX_CLK,	0x0620, 0x0250, 1, 0x0844, 1, 0)
+MX6_PAD_DECL(GPIO_18__SD3_VSELECT,	0x0620, 0x0250, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_18__SDMA_EXT_EVENT1,	0x0620, 0x0250, 3, 0x0910, 1, 0)
+MX6_PAD_DECL(GPIO_18__ASRC_EXT_CLK,	0x0620, 0x0250, 4, 0x07B0, 2, 0)
+MX6_PAD_DECL(GPIO_18__GPIO7_IO13,	0x0620, 0x0250, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_18__SNVS_VIO_5_CTL,	0x0620, 0x0250, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__KEY_COL5,	0x0624, 0x0254, 0, 0x08E8, 1, 0)
+MX6_PAD_DECL(GPIO_19__ENET_1588_EVENT0_OUT,	0x0624, 0x0254, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__SPDIF_OUT,	0x0624, 0x0254, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__CCM_CLKO1,	0x0624, 0x0254, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__ECSPI1_RDY,	0x0624, 0x0254, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__GPIO4_IO05,	0x0624, 0x0254, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(GPIO_19__ENET_TX_ER,	0x0624, 0x0254, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_PIXCLK__IPU1_CSI0_PIXCLK,	0x0628, 0x0258, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_PIXCLK__GPIO5_IO18,	0x0628, 0x0258, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_PIXCLK__ARM_EVENTO,	0x0628, 0x0258, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_MCLK__IPU1_CSI0_HSYNC,	0x062C, 0x025C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_MCLK__CCM_CLKO1,	0x062C, 0x025C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_MCLK__GPIO5_IO19,	0x062C, 0x025C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_MCLK__ARM_TRACE_CTL,	0x062C, 0x025C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DATA_EN__IPU1_CSI0_DATA_EN,	0x0630, 0x0260, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DATA_EN__EIM_DATA00,	0x0630, 0x0260, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DATA_EN__GPIO5_IO20,	0x0630, 0x0260, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DATA_EN__ARM_TRACE_CLK,	0x0630, 0x0260, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_VSYNC__IPU1_CSI0_VSYNC,	0x0634, 0x0264, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_VSYNC__EIM_DATA01,	0x0634, 0x0264, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_VSYNC__GPIO5_IO21,	0x0634, 0x0264, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_VSYNC__ARM_TRACE00,	0x0634, 0x0264, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__IPU1_CSI0_DATA04,	0x0638, 0x0268, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__EIM_DATA02,	0x0638, 0x0268, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__ECSPI1_SCLK,	0x0638, 0x0268, 2, 0x07F4, 3, 0)
+MX6_PAD_DECL(CSI0_DAT4__KEY_COL5,	0x0638, 0x0268, 3, 0x08E8, 2, 0)
+MX6_PAD_DECL(CSI0_DAT4__AUD3_TXC,	0x0638, 0x0268, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__GPIO5_IO22,	0x0638, 0x0268, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT4__ARM_TRACE01,	0x0638, 0x0268, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__IPU1_CSI0_DATA05,	0x063C, 0x026C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__EIM_DATA03,	0x063C, 0x026C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__ECSPI1_MOSI,	0x063C, 0x026C, 2, 0x07FC, 3, 0)
+MX6_PAD_DECL(CSI0_DAT5__KEY_ROW5,	0x063C, 0x026C, 3, 0x08F4, 1, 0)
+MX6_PAD_DECL(CSI0_DAT5__AUD3_TXD,	0x063C, 0x026C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__GPIO5_IO23,	0x063C, 0x026C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT5__ARM_TRACE02,	0x063C, 0x026C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__IPU1_CSI0_DATA06,	0x0640, 0x0270, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__EIM_DATA04,	0x0640, 0x0270, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__ECSPI1_MISO,	0x0640, 0x0270, 2, 0x07F8, 3, 0)
+MX6_PAD_DECL(CSI0_DAT6__KEY_COL6,	0x0640, 0x0270, 3, 0x08EC, 1, 0)
+MX6_PAD_DECL(CSI0_DAT6__AUD3_TXFS,	0x0640, 0x0270, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__GPIO5_IO24,	0x0640, 0x0270, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT6__ARM_TRACE03,	0x0640, 0x0270, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__IPU1_CSI0_DATA07,	0x0644, 0x0274, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__EIM_DATA05,	0x0644, 0x0274, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__ECSPI1_SS0,	0x0644, 0x0274, 2, 0x0800, 3, 0)
+MX6_PAD_DECL(CSI0_DAT7__KEY_ROW6,	0x0644, 0x0274, 3, 0x08F8, 2, 0)
+MX6_PAD_DECL(CSI0_DAT7__AUD3_RXD,	0x0644, 0x0274, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__GPIO5_IO25,	0x0644, 0x0274, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT7__ARM_TRACE04,	0x0644, 0x0274, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__IPU1_CSI0_DATA08,	0x0648, 0x0278, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__EIM_DATA06,	0x0648, 0x0278, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__ECSPI2_SCLK,	0x0648, 0x0278, 2, 0x0810, 2, 0)
+MX6_PAD_DECL(CSI0_DAT8__KEY_COL7,	0x0648, 0x0278, 3, 0x08F0, 2, 0)
+MX6_PAD_DECL(CSI0_DAT8__I2C1_SDA,	0x0648, 0x0278, 20, 0x089C, 1, 0)
+MX6_PAD_DECL(CSI0_DAT8__GPIO5_IO26,	0x0648, 0x0278, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT8__ARM_TRACE05,	0x0648, 0x0278, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__IPU1_CSI0_DATA09,	0x064C, 0x027C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__EIM_DATA07,	0x064C, 0x027C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__ECSPI2_MOSI,	0x064C, 0x027C, 2, 0x0818, 2, 0)
+MX6_PAD_DECL(CSI0_DAT9__KEY_ROW7,	0x064C, 0x027C, 3, 0x08FC, 2, 0)
+MX6_PAD_DECL(CSI0_DAT9__I2C1_SCL,	0x064C, 0x027C, 20, 0x0898, 1, 0)
+MX6_PAD_DECL(CSI0_DAT9__GPIO5_IO27,	0x064C, 0x027C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT9__ARM_TRACE06,	0x064C, 0x027C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__IPU1_CSI0_DATA10,	0x0650, 0x0280, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__AUD3_RXC,	0x0650, 0x0280, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__ECSPI2_MISO,	0x0650, 0x0280, 2, 0x0814, 2, 0)
+MX6_PAD_DECL(CSI0_DAT10__UART1_TX_DATA,	0x0650, 0x0280, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__UART1_RX_DATA,	0x0650, 0x0280, 3, 0x0920, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__GPIO5_IO28,	0x0650, 0x0280, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT10__ARM_TRACE07,	0x0650, 0x0280, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__IPU1_CSI0_DATA11,	0x0654, 0x0284, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__AUD3_RXFS,	0x0654, 0x0284, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__ECSPI2_SS0,	0x0654, 0x0284, 2, 0x081C, 2, 0)
+MX6_PAD_DECL(CSI0_DAT11__UART1_TX_DATA,	0x0654, 0x0284, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__UART1_RX_DATA,	0x0654, 0x0284, 3, 0x0920, 1, 0)
+MX6_PAD_DECL(CSI0_DAT11__GPIO5_IO29,	0x0654, 0x0284, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT11__ARM_TRACE08,	0x0654, 0x0284, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__IPU1_CSI0_DATA12,	0x0658, 0x0288, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__EIM_DATA08,	0x0658, 0x0288, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__UART4_TX_DATA,	0x0658, 0x0288, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__UART4_RX_DATA,	0x0658, 0x0288, 3, 0x0938, 2, 0)
+MX6_PAD_DECL(CSI0_DAT12__GPIO5_IO30,	0x0658, 0x0288, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT12__ARM_TRACE09,	0x0658, 0x0288, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__IPU1_CSI0_DATA13,	0x065C, 0x028C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__EIM_DATA09,	0x065C, 0x028C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__UART4_TX_DATA,	0x065C, 0x028C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__UART4_RX_DATA,	0x065C, 0x028C, 3, 0x0938, 3, 0)
+MX6_PAD_DECL(CSI0_DAT13__GPIO5_IO31,	0x065C, 0x028C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT13__ARM_TRACE10,	0x065C, 0x028C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__IPU1_CSI0_DATA14,	0x0660, 0x0290, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__EIM_DATA10,	0x0660, 0x0290, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__UART5_TX_DATA,	0x0660, 0x0290, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__UART5_RX_DATA,	0x0660, 0x0290, 3, 0x0940, 2, 0)
+MX6_PAD_DECL(CSI0_DAT14__GPIO6_IO00,	0x0660, 0x0290, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT14__ARM_TRACE11,	0x0660, 0x0290, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__IPU1_CSI0_DATA15,	0x0664, 0x0294, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__EIM_DATA11,	0x0664, 0x0294, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__UART5_TX_DATA,	0x0664, 0x0294, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__UART5_RX_DATA,	0x0664, 0x0294, 3, 0x0940, 3, 0)
+MX6_PAD_DECL(CSI0_DAT15__GPIO6_IO01,	0x0664, 0x0294, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT15__ARM_TRACE12,	0x0664, 0x0294, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__IPU1_CSI0_DATA16,	0x0668, 0x0298, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__EIM_DATA12,	0x0668, 0x0298, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__UART4_CTS_B,	0x0668, 0x0298, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__UART4_RTS_B,	0x0668, 0x0298, 3, 0x0934, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__GPIO6_IO02,	0x0668, 0x0298, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT16__ARM_TRACE13,	0x0668, 0x0298, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__IPU1_CSI0_DATA17,	0x066C, 0x029C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__EIM_DATA13,	0x066C, 0x029C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__UART4_CTS_B,	0x066C, 0x029C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__UART4_RTS_B,	0x066C, 0x029C, 3, 0x0934, 1, 0)
+MX6_PAD_DECL(CSI0_DAT17__GPIO6_IO03,	0x066C, 0x029C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT17__ARM_TRACE14,	0x066C, 0x029C, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__IPU1_CSI0_DATA18,	0x0670, 0x02A0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__EIM_DATA14,	0x0670, 0x02A0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__UART5_CTS_B,	0x0670, 0x02A0, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__UART5_RTS_B,	0x0670, 0x02A0, 3, 0x093C, 2, 0)
+MX6_PAD_DECL(CSI0_DAT18__GPIO6_IO04,	0x0670, 0x02A0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT18__ARM_TRACE15,	0x0670, 0x02A0, 7, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT19__IPU1_CSI0_DATA19,	0x0674, 0x02A4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT19__EIM_DATA15,	0x0674, 0x02A4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT19__UART5_CTS_B,	0x0674, 0x02A4, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(CSI0_DAT19__UART5_RTS_B,	0x0674, 0x02A4, 3, 0x093C, 3, 0)
+MX6_PAD_DECL(CSI0_DAT19__GPIO6_IO05,	0x0674, 0x02A4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT7__SD3_DATA7,	0x0690, 0x02A8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT7__UART1_TX_DATA,	0x0690, 0x02A8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT7__UART1_RX_DATA,	0x0690, 0x02A8, 1, 0x0920, 2, 0)
+MX6_PAD_DECL(SD3_DAT7__GPIO6_IO17,	0x0690, 0x02A8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT6__SD3_DATA6,	0x0694, 0x02AC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT6__UART1_TX_DATA,	0x0694, 0x02AC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT6__UART1_RX_DATA,	0x0694, 0x02AC, 1, 0x0920, 3, 0)
+MX6_PAD_DECL(SD3_DAT6__GPIO6_IO18,	0x0694, 0x02AC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT5__SD3_DATA5,	0x0698, 0x02B0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT5__UART2_TX_DATA,	0x0698, 0x02B0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT5__UART2_RX_DATA,	0x0698, 0x02B0, 1, 0x0928, 4, 0)
+MX6_PAD_DECL(SD3_DAT5__GPIO7_IO00,	0x0698, 0x02B0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT4__SD3_DATA4,	0x069C, 0x02B4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT4__UART2_TX_DATA,	0x069C, 0x02B4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT4__UART2_RX_DATA,	0x069C, 0x02B4, 1, 0x0928, 5, 0)
+MX6_PAD_DECL(SD3_DAT4__GPIO7_IO01,	0x069C, 0x02B4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__SD3_CMD,		0x06A0, 0x02B8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__UART2_CTS_B,	0x06A0, 0x02B8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__UART2_RTS_B,	0x06A0, 0x02B8, 1, 0x0924, 2, 0)
+MX6_PAD_DECL(SD3_CMD__FLEXCAN1_TX,	0x06A0, 0x02B8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__GPIO7_IO02,	0x06A0, 0x02B8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CLK__SD3_CLK,	0x06A4, 0x02BC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CLK__UART2_CTS_B,	0x06A4, 0x02BC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CLK__UART2_RTS_B,	0x06A4, 0x02BC, 1, 0x0924, 3, 0)
+MX6_PAD_DECL(SD3_CLK__FLEXCAN1_RX,	0x06A4, 0x02BC, 2, 0x07E4, 2, 0)
+MX6_PAD_DECL(SD3_CLK__GPIO7_IO03,	0x06A4, 0x02BC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT0__SD3_DATA0,	0x06A8, 0x02C0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT0__UART1_CTS_B,	0x06A8, 0x02C0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT0__UART1_RTS_B,	0x06A8, 0x02C0, 1, 0x091C, 2, 0)
+MX6_PAD_DECL(SD3_DAT0__FLEXCAN2_TX,	0x06A8, 0x02C0, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT0__GPIO7_IO04,	0x06A8, 0x02C0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT1__SD3_DATA1,	0x06AC, 0x02C4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT1__UART1_CTS_B,	0x06AC, 0x02C4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT1__UART1_RTS_B,	0x06AC, 0x02C4, 1, 0x091C, 3, 0)
+MX6_PAD_DECL(SD3_DAT1__FLEXCAN2_RX,	0x06AC, 0x02C4, 2, 0x07E8, 1, 0)
+MX6_PAD_DECL(SD3_DAT1__GPIO7_IO05,	0x06AC, 0x02C4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT2__SD3_DATA2,	0x06B0, 0x02C8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT2__GPIO7_IO06,	0x06B0, 0x02C8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT3__SD3_DATA3,	0x06B4, 0x02CC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT3__UART3_CTS_B,	0x06B4, 0x02CC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_DAT3__UART3_RTS_B,	0x06B4, 0x02CC, 1, 0x092C, 4, 0)
+MX6_PAD_DECL(SD3_DAT3__GPIO7_IO07,	0x06B4, 0x02CC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_RST__SD3_RESET,	0x06B8, 0x02D0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_RST__UART3_CTS_B,	0x06B8, 0x02D0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_RST__UART3_RTS_B,	0x06B8, 0x02D0, 1, 0x092C, 5, 0)
+MX6_PAD_DECL(SD3_RST__GPIO7_IO08,	0x06B8, 0x02D0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CLE__NAND_CLE,	0x06BC, 0x02D4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CLE__IPU2_SISG4,	0x06BC, 0x02D4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CLE__GPIO6_IO07,	0x06BC, 0x02D4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_ALE__NAND_ALE,	0x06C0, 0x02D8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_ALE__SD4_RESET,	0x06C0, 0x02D8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_ALE__GPIO6_IO08,	0x06C0, 0x02D8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_WP_B__NAND_WP_B,	0x06C4, 0x02DC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_WP_B__IPU2_SISG5,	0x06C4, 0x02DC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_WP_B__GPIO6_IO09,	0x06C4, 0x02DC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_RB0__NAND_READY_B,	0x06C8, 0x02E0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_RB0__IPU2_DI0_PIN01,	0x06C8, 0x02E0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_RB0__GPIO6_IO10,	0x06C8, 0x02E0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS0__NAND_CE0_B,	0x06CC, 0x02E4, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS0__GPIO6_IO11,	0x06CC, 0x02E4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS1__NAND_CE1_B,	0x06D0, 0x02E8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS1__SD4_VSELECT,	0x06D0, 0x02E8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS1__SD3_VSELECT,	0x06D0, 0x02E8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS1__GPIO6_IO14,	0x06D0, 0x02E8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__NAND_CE2_B,	0x06D4, 0x02EC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__IPU1_SISG0,	0x06D4, 0x02EC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__ESAI_TX0,	0x06D4, 0x02EC, 2, 0x0874, 1, 0)
+MX6_PAD_DECL(NANDF_CS2__EIM_CRE,	0x06D4, 0x02EC, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__CCM_CLKO2,	0x06D4, 0x02EC, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__GPIO6_IO15,	0x06D4, 0x02EC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS2__IPU2_SISG0,	0x06D4, 0x02EC, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__NAND_CE3_B,	0x06D8, 0x02F0, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__IPU1_SISG1,	0x06D8, 0x02F0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__ESAI_TX1,	0x06D8, 0x02F0, 2, 0x0878, 1, 0)
+MX6_PAD_DECL(NANDF_CS3__EIM_ADDR26,	0x06D8, 0x02F0, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__GPIO6_IO16,	0x06D8, 0x02F0, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_CS3__IPU2_SISG1,	0x06D8, 0x02F0, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__SD4_CMD,		0x06DC, 0x02F4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__NAND_RE_B,	0x06DC, 0x02F4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__UART3_TX_DATA,	0x06DC, 0x02F4, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__UART3_RX_DATA,	0x06DC, 0x02F4, 2, 0x0930, 2, 0)
+MX6_PAD_DECL(SD4_CMD__GPIO7_IO09,	0x06DC, 0x02F4, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CLK__SD4_CLK,	0x06E0, 0x02F8, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CLK__NAND_WE_B,	0x06E0, 0x02F8, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CLK__UART3_TX_DATA,	0x06E0, 0x02F8, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CLK__UART3_RX_DATA,	0x06E0, 0x02F8, 2, 0x0930, 3, 0)
+MX6_PAD_DECL(SD4_CLK__GPIO7_IO10,	0x06E0, 0x02F8, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D0__NAND_DATA00,	0x06E4, 0x02FC, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D0__SD1_DATA4,	0x06E4, 0x02FC, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D0__GPIO2_IO00,	0x06E4, 0x02FC, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D1__NAND_DATA01,	0x06E8, 0x0300, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D1__SD1_DATA5,	0x06E8, 0x0300, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D1__GPIO2_IO01,	0x06E8, 0x0300, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D2__NAND_DATA02,	0x06EC, 0x0304, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D2__SD1_DATA6,	0x06EC, 0x0304, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D2__GPIO2_IO02,	0x06EC, 0x0304, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D3__NAND_DATA03,	0x06F0, 0x0308, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D3__SD1_DATA7,	0x06F0, 0x0308, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D3__GPIO2_IO03,	0x06F0, 0x0308, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D4__NAND_DATA04,	0x06F4, 0x030C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D4__SD2_DATA4,	0x06F4, 0x030C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D4__GPIO2_IO04,	0x06F4, 0x030C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D5__NAND_DATA05,	0x06F8, 0x0310, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D5__SD2_DATA5,	0x06F8, 0x0310, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D5__GPIO2_IO05,	0x06F8, 0x0310, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D6__NAND_DATA06,	0x06FC, 0x0314, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D6__SD2_DATA6,	0x06FC, 0x0314, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D6__GPIO2_IO06,	0x06FC, 0x0314, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D7__NAND_DATA07,	0x0700, 0x0318, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D7__SD2_DATA7,	0x0700, 0x0318, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(NANDF_D7__GPIO2_IO07,	0x0700, 0x0318, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT0__SD4_DATA0,	0x0704, 0x031C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT0__NAND_DQS,	0x0704, 0x031C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT0__GPIO2_IO08,	0x0704, 0x031C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT1__SD4_DATA1,	0x0708, 0x0320, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT1__PWM3_OUT,	0x0708, 0x0320, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT1__GPIO2_IO09,	0x0708, 0x0320, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT2__SD4_DATA2,	0x070C, 0x0324, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT2__PWM4_OUT,	0x070C, 0x0324, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT2__GPIO2_IO10,	0x070C, 0x0324, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT3__SD4_DATA3,	0x0710, 0x0328, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT3__GPIO2_IO11,	0x0710, 0x0328, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT4__SD4_DATA4,	0x0714, 0x032C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT4__UART2_TX_DATA,	0x0714, 0x032C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT4__UART2_RX_DATA,	0x0714, 0x032C, 2, 0x0928, 6, 0)
+MX6_PAD_DECL(SD4_DAT4__GPIO2_IO12,	0x0714, 0x032C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT5__SD4_DATA5,	0x0718, 0x0330, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT5__UART2_CTS_B,	0x0718, 0x0330, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT5__UART2_RTS_B,	0x0718, 0x0330, 2, 0x0924, 4, 0)
+MX6_PAD_DECL(SD4_DAT5__GPIO2_IO13,	0x0718, 0x0330, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT6__SD4_DATA6,	0x071C, 0x0334, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT6__UART2_CTS_B,	0x071C, 0x0334, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT6__UART2_RTS_B,	0x071C, 0x0334, 2, 0x0924, 5, 0)
+MX6_PAD_DECL(SD4_DAT6__GPIO2_IO14,	0x071C, 0x0334, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT7__SD4_DATA7,	0x0720, 0x0338, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT7__UART2_TX_DATA,	0x0720, 0x0338, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_DAT7__UART2_RX_DATA,	0x0720, 0x0338, 2, 0x0928, 7, 0)
+MX6_PAD_DECL(SD4_DAT7__GPIO2_IO15,	0x0720, 0x0338, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT1__SD1_DATA1,	0x0724, 0x033C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT1__ECSPI5_SS0,	0x0724, 0x033C, 1, 0x0834, 1, 0)
+MX6_PAD_DECL(SD1_DAT1__PWM3_OUT,	0x0724, 0x033C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT1__GPT_CAPTURE2,	0x0724, 0x033C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT1__GPIO1_IO17,	0x0724, 0x033C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT0__SD1_DATA0,	0x0728, 0x0340, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT0__ECSPI5_MISO,	0x0728, 0x0340, 1, 0x082C, 1, 0)
+MX6_PAD_DECL(SD1_DAT0__GPT_CAPTURE1,	0x0728, 0x0340, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT0__GPIO1_IO16,	0x0728, 0x0340, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__SD1_DATA3,	0x072C, 0x0344, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__ECSPI5_SS2,	0x072C, 0x0344, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__GPT_COMPARE3,	0x072C, 0x0344, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__PWM1_OUT,	0x072C, 0x0344, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__WDOG2_B,	0x072C, 0x0344, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__GPIO1_IO21,	0x072C, 0x0344, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT3__WDOG2_RESET_B_DEB,	0x072C, 0x0344, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__SD1_CMD,		0x0730, 0x0348, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__ECSPI5_MOSI,	0x0730, 0x0348, 1, 0x0830, 0, 0)
+MX6_PAD_DECL(SD1_CMD__PWM4_OUT,	0x0730, 0x0348, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__GPT_COMPARE1,	0x0730, 0x0348, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__GPIO1_IO18,	0x0730, 0x0348, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__SD1_DATA2,	0x0734, 0x034C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__ECSPI5_SS1,	0x0734, 0x034C, 1, 0x0838, 1, 0)
+MX6_PAD_DECL(SD1_DAT2__GPT_COMPARE2,	0x0734, 0x034C, 2, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__PWM2_OUT,	0x0734, 0x034C, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__WDOG1_B,	0x0734, 0x034C, 4, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__GPIO1_IO19,	0x0734, 0x034C, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_DAT2__WDOG1_RESET_B_DEB,	0x0734, 0x034C, 6, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CLK__SD1_CLK,	0x0738, 0x0350, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CLK__ECSPI5_SCLK,	0x0738, 0x0350, 1, 0x0828, 0, 0)
+MX6_PAD_DECL(SD1_CLK__GPT_CLKIN,	0x0738, 0x0350, 3, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CLK__GPIO1_IO20,	0x0738, 0x0350, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_CLK__SD2_CLK,	0x073C, 0x0354, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_CLK__ECSPI5_SCLK,	0x073C, 0x0354, 1, 0x0828, 1, 0)
+MX6_PAD_DECL(SD2_CLK__KEY_COL5,	0x073C, 0x0354, 2, 0x08E8, 3, 0)
+MX6_PAD_DECL(SD2_CLK__AUD4_RXFS,	0x073C, 0x0354, 3, 0x07C0, 1, 0)
+MX6_PAD_DECL(SD2_CLK__GPIO1_IO10,	0x073C, 0x0354, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_CMD__SD2_CMD,		0x0740, 0x0358, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_CMD__ECSPI5_MOSI,	0x0740, 0x0358, 1, 0x0830, 1, 0)
+MX6_PAD_DECL(SD2_CMD__KEY_ROW5,	0x0740, 0x0358, 2, 0x08F4, 2, 0)
+MX6_PAD_DECL(SD2_CMD__AUD4_RXC,	0x0740, 0x0358, 3, 0x07BC, 1, 0)
+MX6_PAD_DECL(SD2_CMD__GPIO1_IO11,	0x0740, 0x0358, 5, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT3__SD2_DATA3,	0x0744, 0x035C, 0, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT3__ECSPI5_SS3,	0x0744, 0x035C, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_DAT3__KEY_COL6,	0x0744, 0x035C, 2, 0x08EC, 2, 0)
+MX6_PAD_DECL(SD2_DAT3__AUD4_TXC,	0x0744, 0x035C, 3, 0x07C4, 1, 0)
+MX6_PAD_DECL(SD2_DAT3__GPIO1_IO12,	0x0744, 0x035C, 5, 0x0000, 0, 0)
+
+#endif	/* __ASM_ARCH_MX6_MX6Q_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h
new file mode 100644
index 000000000..d397c8a06
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_MX6SL_DDR_H__
+#define __ASM_ARCH_MX6SL_DDR_H__
+
+#ifndef CONFIG_MX6SL
+#error "wrong CPU"
+#endif
+
+#define MX6_IOM_DRAM_CAS_B	0x020e0300
+#define MX6_IOM_DRAM_CS0_B	0x020e0304
+#define MX6_IOM_DRAM_CS1_B	0x020e0308
+
+#define MX6_IOM_DRAM_DQM0	0x020e030c
+#define MX6_IOM_DRAM_DQM1	0x020e0310
+#define MX6_IOM_DRAM_DQM2	0x020e0314
+#define MX6_IOM_DRAM_DQM3	0x020e0318
+
+#define MX6_IOM_DRAM_RAS_B	0x020e031c
+#define MX6_IOM_DRAM_RESET	0x020e0320
+
+#define MX6_IOM_DRAM_SDBA0	0x020e0324
+#define MX6_IOM_DRAM_SDBA1	0x020e0328
+#define MX6_IOM_DRAM_SDBA2	0x020e032c
+
+#define MX6_IOM_DRAM_SDCKE0	0x020e0330
+#define MX6_IOM_DRAM_SDCKE1	0x020e0334
+
+#define MX6_IOM_DRAM_SDCLK0_P	0x020e0338
+
+#define MX6_IOM_DRAM_ODT0	0x020e033c
+#define MX6_IOM_DRAM_ODT1	0x020e0340
+
+#define MX6_IOM_DRAM_SDQS0_P	0x020e0344
+#define MX6_IOM_DRAM_SDQS1_P	0x020e0348
+#define MX6_IOM_DRAM_SDQS2_P	0x020e034c
+#define MX6_IOM_DRAM_SDQS3_P	0x020e0350
+
+#define MX6_IOM_DRAM_SDWE_B	0x020e0354
+
+#endif /*__ASM_ARCH_MX6SL_DDR_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
new file mode 100644
index 000000000..01b14d73d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __ASM_ARCH_MX6_MX6SL_PINS_H__
+#define __ASM_ARCH_MX6_MX6SL_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+	MX6_PAD_ECSPI1_MISO__ECSPI_MISO				= IOMUX_PAD(0x0358, 0x0068, 0, 0x0684, 0, 0),
+	MX6_PAD_ECSPI1_MOSI__ECSPI_MOSI				= IOMUX_PAD(0x035C, 0x006C, 0, 0x0688, 0, 0),
+	MX6_PAD_ECSPI1_SCLK__ECSPI_SCLK				= IOMUX_PAD(0x0360, 0x0070, 0, 0x067C, 0, 0),
+	MX6_PAD_ECSPI1_SS0__GPIO4_IO11				= IOMUX_PAD(0x0364, 0x0074, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__USDHC1_CLK					= IOMUX_PAD(0x0534, 0x022C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__USDHC1_CMD					= IOMUX_PAD(0x0538, 0x0230, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT0__USDHC1_DAT0				= IOMUX_PAD(0x053C, 0x0234, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT1__USDHC1_DAT1				= IOMUX_PAD(0x0540, 0x0238, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT2__USDHC1_DAT2				= IOMUX_PAD(0x0544, 0x023C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT3__USDHC1_DAT3				= IOMUX_PAD(0x0548, 0x0240, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT4__USDHC1_DAT4				= IOMUX_PAD(0x054C, 0x0244, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT5__USDHC1_DAT5				= IOMUX_PAD(0x0550, 0x0248, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT5__GPIO_5_9				= IOMUX_PAD(0x0550, 0x0248, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT6__USDHC1_DAT6				= IOMUX_PAD(0x0554, 0x024C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DAT7__USDHC1_DAT7				= IOMUX_PAD(0x0558, 0x0250, 0, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW7__GPIO_4_7					= IOMUX_PAD(0x04B0, 0x01A8, 5, 0x0000, 0, 0),
+	MX6_PAD_SD2_CLK__USDHC2_CLK				= IOMUX_PAD(0x055C, 0x0254, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_CMD__USDHC2_CMD				= IOMUX_PAD(0x0560, 0x0258, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DAT0__USDHC2_DAT0				= IOMUX_PAD(0x0564, 0x025C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DAT1__USDHC2_DAT1				= IOMUX_PAD(0x0568, 0x0260, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DAT2__USDHC2_DAT2				= IOMUX_PAD(0x056C, 0x0264, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DAT3__USDHC2_DAT3				= IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DAT4__USDHC2_DAT4				= IOMUX_PAD(0X0574, 0X026C, 0, 0X0000, 0, 0),
+	MX6_PAD_SD2_DAT5__USDHC2_DAT5				= IOMUX_PAD(0X0578, 0X0270, 0, 0X0000, 0, 0),
+	MX6_PAD_SD2_DAT6__USDHC2_DAT6				= IOMUX_PAD(0X057C, 0X0274, 0, 0X0000, 0, 0),
+	MX6_PAD_SD2_DAT7__USDHC2_DAT7				= IOMUX_PAD(0X0580, 0X0278, 0, 0X0000, 0, 0),
+	MX6_PAD_SD2_DAT7__GPIO_5_0					= IOMUX_PAD(0x0580, 0x0278, 5, 0x0000, 0, 0),
+	MX6_PAD_SD2_RST__USDHC2_RST				= IOMUX_PAD(0x0584, 0x027C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_CLK__USDHC3_CLK					= IOMUX_PAD(0x0588, 0x0280, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_CMD__USDHC3_CMD					= IOMUX_PAD(0x058C, 0x0284, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_DAT0__USDHC3_DAT0				= IOMUX_PAD(0x0590, 0x0288, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_DAT1__USDHC3_DAT1				= IOMUX_PAD(0x0594, 0x028C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_DAT2__USDHC3_DAT2				= IOMUX_PAD(0x0598, 0x0290, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_DAT3__USDHC3_DAT3				= IOMUX_PAD(0x059C, 0x0294, 0, 0x0000, 0, 0),
+	MX6_PAD_REF_CLK_32K__GPIO_3_22				= IOMUX_PAD(0x0530, 0x0228, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_RXD__UART1_RXD				= IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0),
+	MX6_PAD_UART1_TXD__UART1_TXD				= IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0),
+
+	MX6_PAD_FEC_MDC__FEC_MDC				= IOMUX_PAD(0x41c, 0x12c, 0, 0x000, 0, 0),
+	MX6_PAD_FEC_MDIO__FEC_MDIO				= IOMUX_PAD(0x420, 0x130, 0, 0x6f4, 1, 0),
+	MX6_PAD_FEC_CRS_DV__FEC_RX_DV				= IOMUX_PAD(0x418, 0x128, 0, 0x704, 1, 0),
+	MX6_PAD_FEC_RXD0__FEC_RX_DATA0				= IOMUX_PAD(0x42c, 0x13c, 0, 0x6f8, 0, 0),
+	MX6_PAD_FEC_RXD1__FEC_RX_DATA1				= IOMUX_PAD(0x430, 0x140, 0, 0x6fc, 1, 0),
+	MX6_PAD_FEC_TX_EN__FEC_TX_EN				= IOMUX_PAD(0x438, 0x148, 0, 0x000, 0, 0),
+	MX6_PAD_FEC_TXD0__FEC_TX_DATA0				= IOMUX_PAD(0x43c, 0x14c, 0, 0x000, 0, 0),
+	MX6_PAD_FEC_TXD1__FEC_TX_DATA1				= IOMUX_PAD(0x440, 0x150, 0, 0x000, 0, 0),
+	MX6_PAD_FEC_REF_CLK__FEC_REF_OUT			= IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0),
+	MX6_PAD_FEC_RX_ER__GPIO_4_19				= IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0),
+	MX6_PAD_FEC_TX_CLK__GPIO_4_21				= IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID			= IOMUX_PAD(0x03D0, 0x00E0, 4, 0x05DC, 0, 0),
+
+	MX6_PAD_KEY_COL4__USB_USBOTG1_PWR			= IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL5__USB_USBOTG2_PWR			= IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0),
+
+	MX6_PAD_I2C1_SDA__I2C1_SDA				= IOMUX_PAD(0x0450, 0x0160, 0x10, 0x0720, 2, 0),
+	MX6_PAD_I2C1_SDA__GPIO_3_13				= IOMUX_PAD(0x0450, 0x0160, 5, 0x0000, 0, 0),
+	MX6_PAD_I2C1_SCL__I2C1_SCL				= IOMUX_PAD(0x044C, 0x015C, 0x10, 0x071C, 2, 0),
+	MX6_PAD_I2C1_SCL__GPIO_3_12				= IOMUX_PAD(0x044C, 0x015C, 5, 0x0000, 0, 0),
+};
+#endif	/* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sll_pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sll_pins.h
new file mode 100644
index 000000000..e4bd4ef89
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sll_pins.h
@@ -0,0 +1,1018 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 - 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_IMX6SLL_PINS_H__
+#define __ASM_ARCH_IMX6SLL_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+	MX6_PAD_WDOG_B__WDOG1_B                               = IOMUX_PAD(0x02DC, 0x0014, 0, 0x0000, 0, 0),
+	MX6_PAD_WDOG_B__WDOG1_RESET_B_DEB                     = IOMUX_PAD(0x02DC, 0x0014, 1, 0x0000, 0, 0),
+	MX6_PAD_WDOG_B__UART5_RI_B                            = IOMUX_PAD(0x02DC, 0x0014, 2, 0x0000, 0, 0),
+	MX6_PAD_WDOG_B__GPIO3_IO18                            = IOMUX_PAD(0x02DC, 0x0014, 5, 0x0000, 0, 0),
+
+	MX6_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M              = IOMUX_PAD(0x02E0, 0x0018, 0, 0x0000, 0, 0),
+	MX6_PAD_REF_CLK_24M__I2C3_SCL                         = IOMUX_PAD(0x02E0, 0x0018, IOMUX_CONFIG_SION | 1, 0x068C, 0, 0),
+	MX6_PAD_REF_CLK_24M__PWM3_OUT                         = IOMUX_PAD(0x02E0, 0x0018, 2, 0x0000, 0, 0),
+	MX6_PAD_REF_CLK_24M__USB_OTG2_ID                      = IOMUX_PAD(0x02E0, 0x0018, 3, 0x0560, 0, 0),
+	MX6_PAD_REF_CLK_24M__CCM_PMIC_READY                   = IOMUX_PAD(0x02E0, 0x0018, 4, 0x05AC, 0, 0),
+	MX6_PAD_REF_CLK_24M__GPIO3_IO21                       = IOMUX_PAD(0x02E0, 0x0018, 5, 0x0000, 0, 0),
+	MX6_PAD_REF_CLK_24M__SD3_WP                           = IOMUX_PAD(0x02E0, 0x0018, 6, 0x0794, 0, 0),
+
+	MX6_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K              = IOMUX_PAD(0x02E4, 0x001C, 0, 0x0000, 0, 0),
+	MX6_PAD_REF_CLK_32K__I2C3_SDA                         = IOMUX_PAD(0x02E4, 0x001C, IOMUX_CONFIG_SION | 1, 0x0690, 0, 0),
+	MX6_PAD_REF_CLK_32K__PWM4_OUT                         = IOMUX_PAD(0x02E4, 0x001C, 2, 0x0000, 0, 0),
+	MX6_PAD_REF_CLK_32K__USB_OTG1_ID                      = IOMUX_PAD(0x02E4, 0x001C, 3, 0x055C, 0, 0),
+	MX6_PAD_REF_CLK_32K__SD1_LCTL                         = IOMUX_PAD(0x02E4, 0x001C, 4, 0x0000, 0, 0),
+	MX6_PAD_REF_CLK_32K__GPIO3_IO22                       = IOMUX_PAD(0x02E4, 0x001C, 5, 0x0000, 0, 0),
+	MX6_PAD_REF_CLK_32K__SD3_CD_B                         = IOMUX_PAD(0x02E4, 0x001C, 6, 0x0780, 0, 0),
+
+	MX6_PAD_PWM1__PWM1_OUT                                = IOMUX_PAD(0x02E8, 0x0020, 0, 0x0000, 0, 0),
+	MX6_PAD_PWM1__CCM_CLKO                                = IOMUX_PAD(0x02E8, 0x0020, 1, 0x0000, 0, 0),
+	MX6_PAD_PWM1__AUDIO_CLK_OUT                           = IOMUX_PAD(0x02E8, 0x0020, 2, 0x0000, 0, 0),
+	MX6_PAD_PWM1__CSI_MCLK                                = IOMUX_PAD(0x02E8, 0x0020, 4, 0x0000, 0, 0),
+	MX6_PAD_PWM1__GPIO3_IO23                              = IOMUX_PAD(0x02E8, 0x0020, 5, 0x0000, 0, 0),
+	MX6_PAD_PWM1__EPIT1_OUT                               = IOMUX_PAD(0x02E8, 0x0020, 6, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_COL0__KEY_COL0                            = IOMUX_PAD(0x02EC, 0x0024, 0, 0x06A0, 0, 0),
+	MX6_PAD_KEY_COL0__I2C2_SCL                            = IOMUX_PAD(0x02EC, 0x0024, IOMUX_CONFIG_SION | 1, 0x0684, 0, 0),
+	MX6_PAD_KEY_COL0__LCD_DATA00                          = IOMUX_PAD(0x02EC, 0x0024, 2, 0x06D8, 0, 0),
+	MX6_PAD_KEY_COL0__SD1_CD_B                            = IOMUX_PAD(0x02EC, 0x0024, 4, 0x0770, 1, 0),
+	MX6_PAD_KEY_COL0__GPIO3_IO24                          = IOMUX_PAD(0x02EC, 0x0024, 5, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_ROW0__KEY_ROW0                            = IOMUX_PAD(0x02F0, 0x0028, 0, 0x06C0, 0, 0),
+	MX6_PAD_KEY_ROW0__I2C2_SDA                            = IOMUX_PAD(0x02F0, 0x0028, IOMUX_CONFIG_SION | 1, 0x0688, 0, 0),
+	MX6_PAD_KEY_ROW0__LCD_DATA01                          = IOMUX_PAD(0x02F0, 0x0028, 2, 0x06DC, 0, 0),
+	MX6_PAD_KEY_ROW0__SD1_WP                              = IOMUX_PAD(0x02F0, 0x0028, 4, 0x0774, 1, 0),
+	MX6_PAD_KEY_ROW0__GPIO3_IO25                          = IOMUX_PAD(0x02F0, 0x0028, 5, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_COL1__KEY_COL1                            = IOMUX_PAD(0x02F4, 0x002C, 0, 0x06A4, 0, 0),
+	MX6_PAD_KEY_COL1__ECSPI4_MOSI                         = IOMUX_PAD(0x02F4, 0x002C, 1, 0x0658, 1, 0),
+	MX6_PAD_KEY_COL1__LCD_DATA02                          = IOMUX_PAD(0x02F4, 0x002C, 2, 0x06E0, 0, 0),
+	MX6_PAD_KEY_COL1__SD3_DATA4                           = IOMUX_PAD(0x02F4, 0x002C, 4, 0x0784, 0, 0),
+	MX6_PAD_KEY_COL1__GPIO3_IO26                          = IOMUX_PAD(0x02F4, 0x002C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_ROW1__KEY_ROW1                            = IOMUX_PAD(0x02F8, 0x0030, 0, 0x06C4, 0, 0),
+	MX6_PAD_KEY_ROW1__ECSPI4_MISO                         = IOMUX_PAD(0x02F8, 0x0030, 1, 0x0654, 1, 0),
+	MX6_PAD_KEY_ROW1__LCD_DATA03                          = IOMUX_PAD(0x02F8, 0x0030, 2, 0x06E4, 0, 0),
+	MX6_PAD_KEY_ROW1__CSI_FIELD                           = IOMUX_PAD(0x02F8, 0x0030, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW1__SD3_DATA5                           = IOMUX_PAD(0x02F8, 0x0030, 4, 0x0788, 0, 0),
+	MX6_PAD_KEY_ROW1__GPIO3_IO27                          = IOMUX_PAD(0x02F8, 0x0030, 5, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_COL2__KEY_COL2                            = IOMUX_PAD(0x02FC, 0x0034, 0, 0x06A8, 0, 0),
+	MX6_PAD_KEY_COL2__ECSPI4_SS0                          = IOMUX_PAD(0x02FC, 0x0034, 1, 0x065C, 1, 0),
+	MX6_PAD_KEY_COL2__LCD_DATA04                          = IOMUX_PAD(0x02FC, 0x0034, 2, 0x06E8, 0, 0),
+	MX6_PAD_KEY_COL2__CSI_DATA12                          = IOMUX_PAD(0x02FC, 0x0034, 3, 0x05B8, 1, 0),
+	MX6_PAD_KEY_COL2__SD3_DATA6                           = IOMUX_PAD(0x02FC, 0x0034, 4, 0x078C, 0, 0),
+	MX6_PAD_KEY_COL2__GPIO3_IO28                          = IOMUX_PAD(0x02FC, 0x0034, 5, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_ROW2__KEY_ROW2                            = IOMUX_PAD(0x0300, 0x0038, 0, 0x06C8, 0, 0),
+	MX6_PAD_KEY_ROW2__ECSPI4_SCLK                         = IOMUX_PAD(0x0300, 0x0038, 1, 0x0650, 1, 0),
+	MX6_PAD_KEY_ROW2__LCD_DATA05                          = IOMUX_PAD(0x0300, 0x0038, 2, 0x06EC, 0, 0),
+	MX6_PAD_KEY_ROW2__CSI_DATA13                          = IOMUX_PAD(0x0300, 0x0038, 3, 0x05BC, 1, 0),
+	MX6_PAD_KEY_ROW2__SD3_DATA7                           = IOMUX_PAD(0x0300, 0x0038, 4, 0x0790, 0, 0),
+	MX6_PAD_KEY_ROW2__GPIO3_IO29                          = IOMUX_PAD(0x0300, 0x0038, 5, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_COL3__KEY_COL3                            = IOMUX_PAD(0x0304, 0x003C, 0, 0x06AC, 0, 0),
+	MX6_PAD_KEY_COL3__AUD6_RXFS                           = IOMUX_PAD(0x0304, 0x003C, 1, 0x05A0, 1, 0),
+	MX6_PAD_KEY_COL3__LCD_DATA06                          = IOMUX_PAD(0x0304, 0x003C, 2, 0x06F0, 0, 0),
+	MX6_PAD_KEY_COL3__CSI_DATA14                          = IOMUX_PAD(0x0304, 0x003C, 3, 0x05C0, 1, 0),
+	MX6_PAD_KEY_COL3__GPIO3_IO30                          = IOMUX_PAD(0x0304, 0x003C, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL3__SD1_RESET                           = IOMUX_PAD(0x0304, 0x003C, 6, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_ROW3__KEY_ROW3                            = IOMUX_PAD(0x0308, 0x0040, 0, 0x06CC, 1, 0),
+	MX6_PAD_KEY_ROW3__AUD6_RXC                            = IOMUX_PAD(0x0308, 0x0040, 1, 0x059C, 1, 0),
+	MX6_PAD_KEY_ROW3__LCD_DATA07                          = IOMUX_PAD(0x0308, 0x0040, 2, 0x06F4, 1, 0),
+	MX6_PAD_KEY_ROW3__CSI_DATA15                          = IOMUX_PAD(0x0308, 0x0040, 3, 0x05C4, 2, 0),
+	MX6_PAD_KEY_ROW3__GPIO3_IO31                          = IOMUX_PAD(0x0308, 0x0040, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW3__SD1_VSELECT                         = IOMUX_PAD(0x0308, 0x0040, 6, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_COL4__KEY_COL4                            = IOMUX_PAD(0x030C, 0x0044, 0, 0x06B0, 1, 0),
+	MX6_PAD_KEY_COL4__AUD6_RXD                            = IOMUX_PAD(0x030C, 0x0044, 1, 0x0594, 1, 0),
+	MX6_PAD_KEY_COL4__LCD_DATA08                          = IOMUX_PAD(0x030C, 0x0044, 2, 0x06F8, 1, 0),
+	MX6_PAD_KEY_COL4__CSI_DATA16                          = IOMUX_PAD(0x030C, 0x0044, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL4__GPIO4_IO00                          = IOMUX_PAD(0x030C, 0x0044, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL4__USB_OTG1_PWR                        = IOMUX_PAD(0x030C, 0x0044, 6, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_ROW4__KEY_ROW4                            = IOMUX_PAD(0x0310, 0x0048, 0, 0x06D0, 1, 0),
+	MX6_PAD_KEY_ROW4__AUD6_TXC                            = IOMUX_PAD(0x0310, 0x0048, 1, 0x05A4, 1, 0),
+	MX6_PAD_KEY_ROW4__LCD_DATA09                          = IOMUX_PAD(0x0310, 0x0048, 2, 0x06FC, 1, 0),
+	MX6_PAD_KEY_ROW4__CSI_DATA17                          = IOMUX_PAD(0x0310, 0x0048, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW4__GPIO4_IO01                          = IOMUX_PAD(0x0310, 0x0048, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW4__USB_OTG1_OC                         = IOMUX_PAD(0x0310, 0x0048, 6, 0x076C, 2, 0),
+
+	MX6_PAD_KEY_COL5__KEY_COL5                            = IOMUX_PAD(0x0314, 0x004C, 0, 0x0694, 1, 0),
+	MX6_PAD_KEY_COL5__AUD6_TXFS                           = IOMUX_PAD(0x0314, 0x004C, 1, 0x05A8, 1, 0),
+	MX6_PAD_KEY_COL5__LCD_DATA10                          = IOMUX_PAD(0x0314, 0x004C, 2, 0x0700, 0, 0),
+	MX6_PAD_KEY_COL5__CSI_DATA18                          = IOMUX_PAD(0x0314, 0x004C, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL5__GPIO4_IO02                          = IOMUX_PAD(0x0314, 0x004C, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL5__USB_OTG2_PWR                        = IOMUX_PAD(0x0314, 0x004C, 6, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_ROW5__KEY_ROW5                            = IOMUX_PAD(0x0318, 0x0050, 0, 0x06B4, 2, 0),
+	MX6_PAD_KEY_ROW5__AUD6_TXD                            = IOMUX_PAD(0x0318, 0x0050, 1, 0x0598, 1, 0),
+	MX6_PAD_KEY_ROW5__LCD_DATA11                          = IOMUX_PAD(0x0318, 0x0050, 2, 0x0704, 1, 0),
+	MX6_PAD_KEY_ROW5__CSI_DATA19                          = IOMUX_PAD(0x0318, 0x0050, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW5__GPIO4_IO03                          = IOMUX_PAD(0x0318, 0x0050, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW5__USB_OTG2_OC                         = IOMUX_PAD(0x0318, 0x0050, 6, 0x0768, 3, 0),
+
+	MX6_PAD_KEY_COL6__KEY_COL6                            = IOMUX_PAD(0x031C, 0x0054, 0, 0x0698, 2, 0),
+	MX6_PAD_KEY_COL6__UART4_DCE_RX                        = IOMUX_PAD(0x031C, 0x0054, 1, 0x075C, 2, 0),
+	MX6_PAD_KEY_COL6__UART4_DTE_TX                        = IOMUX_PAD(0x031C, 0x0054, 1, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL6__LCD_DATA12                          = IOMUX_PAD(0x031C, 0x0054, 2, 0x0708, 1, 0),
+	MX6_PAD_KEY_COL6__CSI_DATA20                          = IOMUX_PAD(0x031C, 0x0054, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL6__GPIO4_IO04                          = IOMUX_PAD(0x031C, 0x0054, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL6__SD3_RESET                           = IOMUX_PAD(0x031C, 0x0054, 6, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_ROW6__KEY_ROW6                            = IOMUX_PAD(0x0320, 0x0058, 0, 0x06B8, 2, 0),
+	MX6_PAD_KEY_ROW6__UART4_DCE_TX                        = IOMUX_PAD(0x0320, 0x0058, 1, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW6__UART4_DTE_RX                        = IOMUX_PAD(0x0320, 0x0058, 1, 0x075C, 3, 0),
+	MX6_PAD_KEY_ROW6__LCD_DATA13                          = IOMUX_PAD(0x0320, 0x0058, 2, 0x070C, 1, 0),
+	MX6_PAD_KEY_ROW6__CSI_DATA21                          = IOMUX_PAD(0x0320, 0x0058, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW6__GPIO4_IO05                          = IOMUX_PAD(0x0320, 0x0058, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW6__SD3_VSELECT                         = IOMUX_PAD(0x0320, 0x0058, 6, 0x0000, 0, 0),
+
+	MX6_PAD_KEY_COL7__KEY_COL7                            = IOMUX_PAD(0x0324, 0x005C, 0, 0x069C, 2, 0),
+	MX6_PAD_KEY_COL7__UART4_DCE_RTS                       = IOMUX_PAD(0x0324, 0x005C, 1, 0x0758, 2, 0),
+	MX6_PAD_KEY_COL7__UART4_DTE_CTS                       = IOMUX_PAD(0x0324, 0x005C, 1, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL7__LCD_DATA14                          = IOMUX_PAD(0x0324, 0x005C, 2, 0x0710, 1, 0),
+	MX6_PAD_KEY_COL7__CSI_DATA22                          = IOMUX_PAD(0x0324, 0x005C, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL7__GPIO4_IO06                          = IOMUX_PAD(0x0324, 0x005C, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_COL7__SD1_WP                              = IOMUX_PAD(0x0324, 0x005C, 6, 0x0774, 3, 0),
+
+	MX6_PAD_KEY_ROW7__KEY_ROW7                            = IOMUX_PAD(0x0328, 0x0060, 0, 0x06BC, 2, 0),
+	MX6_PAD_KEY_ROW7__UART4_DCE_CTS                       = IOMUX_PAD(0x0328, 0x0060, 1, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW7__UART4_DTE_RTS                       = IOMUX_PAD(0x0328, 0x0060, 1, 0x0758, 3, 0),
+	MX6_PAD_KEY_ROW7__LCD_DATA15                          = IOMUX_PAD(0x0328, 0x0060, 2, 0x0714, 1, 0),
+	MX6_PAD_KEY_ROW7__CSI_DATA23                          = IOMUX_PAD(0x0328, 0x0060, 3, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW7__GPIO4_IO07                          = IOMUX_PAD(0x0328, 0x0060, 5, 0x0000, 0, 0),
+	MX6_PAD_KEY_ROW7__SD1_CD_B                            = IOMUX_PAD(0x0328, 0x0060, 6, 0x0770, 3, 0),
+
+	MX6_PAD_EPDC_DATA00__EPDC_DATA00                      = IOMUX_PAD(0x032C, 0x0064, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA00__ECSPI4_MOSI                      = IOMUX_PAD(0x032C, 0x0064, 1, 0x0658, 2, 0),
+	MX6_PAD_EPDC_DATA00__LCD_DATA24                       = IOMUX_PAD(0x032C, 0x0064, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA00__CSI_DATA00                       = IOMUX_PAD(0x032C, 0x0064, 3, 0x05C8, 2, 0),
+	MX6_PAD_EPDC_DATA00__GPIO1_IO07                       = IOMUX_PAD(0x032C, 0x0064, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA01__EPDC_DATA01                      = IOMUX_PAD(0x0330, 0x0068, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA01__ECSPI4_MISO                      = IOMUX_PAD(0x0330, 0x0068, 1, 0x0654, 2, 0),
+	MX6_PAD_EPDC_DATA01__LCD_DATA25                       = IOMUX_PAD(0x0330, 0x0068, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA01__CSI_DATA01                       = IOMUX_PAD(0x0330, 0x0068, 3, 0x05CC, 2, 0),
+	MX6_PAD_EPDC_DATA01__GPIO1_IO08                       = IOMUX_PAD(0x0330, 0x0068, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA02__EPDC_DATA02                      = IOMUX_PAD(0x0334, 0x006C, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA02__ECSPI4_SS0                       = IOMUX_PAD(0x0334, 0x006C, 1, 0x065C, 2, 0),
+	MX6_PAD_EPDC_DATA02__LCD_DATA26                       = IOMUX_PAD(0x0334, 0x006C, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA02__CSI_DATA02                       = IOMUX_PAD(0x0334, 0x006C, 3, 0x05D0, 2, 0),
+	MX6_PAD_EPDC_DATA02__GPIO1_IO09                       = IOMUX_PAD(0x0334, 0x006C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA03__EPDC_DATA03                      = IOMUX_PAD(0x0338, 0x0070, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA03__ECSPI4_SCLK                      = IOMUX_PAD(0x0338, 0x0070, 1, 0x0650, 2, 0),
+	MX6_PAD_EPDC_DATA03__LCD_DATA27                       = IOMUX_PAD(0x0338, 0x0070, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA03__CSI_DATA03                       = IOMUX_PAD(0x0338, 0x0070, 3, 0x05D4, 2, 0),
+	MX6_PAD_EPDC_DATA03__GPIO1_IO10                       = IOMUX_PAD(0x0338, 0x0070, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA04__EPDC_DATA04                      = IOMUX_PAD(0x033C, 0x0074, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA04__ECSPI4_SS1                       = IOMUX_PAD(0x033C, 0x0074, 1, 0x0660, 1, 0),
+	MX6_PAD_EPDC_DATA04__LCD_DATA28                       = IOMUX_PAD(0x033C, 0x0074, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA04__CSI_DATA04                       = IOMUX_PAD(0x033C, 0x0074, 3, 0x05D8, 2, 0),
+	MX6_PAD_EPDC_DATA04__GPIO1_IO11                       = IOMUX_PAD(0x033C, 0x0074, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA05__EPDC_DATA05                      = IOMUX_PAD(0x0340, 0x0078, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA05__ECSPI4_SS2                       = IOMUX_PAD(0x0340, 0x0078, 1, 0x0664, 1, 0),
+	MX6_PAD_EPDC_DATA05__LCD_DATA29                       = IOMUX_PAD(0x0340, 0x0078, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA05__CSI_DATA05                       = IOMUX_PAD(0x0340, 0x0078, 3, 0x05DC, 2, 0),
+	MX6_PAD_EPDC_DATA05__GPIO1_IO12                       = IOMUX_PAD(0x0340, 0x0078, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA06__EPDC_DATA06                      = IOMUX_PAD(0x0344, 0x007C, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA06__ECSPI4_SS3                       = IOMUX_PAD(0x0344, 0x007C, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA06__LCD_DATA30                       = IOMUX_PAD(0x0344, 0x007C, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA06__CSI_DATA06                       = IOMUX_PAD(0x0344, 0x007C, 3, 0x05E0, 2, 0),
+	MX6_PAD_EPDC_DATA06__GPIO1_IO13                       = IOMUX_PAD(0x0344, 0x007C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA07__EPDC_DATA07                      = IOMUX_PAD(0x0348, 0x0080, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA07__ECSPI4_RDY                       = IOMUX_PAD(0x0348, 0x0080, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA07__LCD_DATA31                       = IOMUX_PAD(0x0348, 0x0080, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA07__CSI_DATA07                       = IOMUX_PAD(0x0348, 0x0080, 3, 0x05E4, 2, 0),
+	MX6_PAD_EPDC_DATA07__GPIO1_IO14                       = IOMUX_PAD(0x0348, 0x0080, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA08__EPDC_DATA08                      = IOMUX_PAD(0x034C, 0x0084, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA08__ECSPI3_MOSI                      = IOMUX_PAD(0x034C, 0x0084, 1, 0x063C, 2, 0),
+	MX6_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                   = IOMUX_PAD(0x034C, 0x0084, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA08__GPIO1_IO15                       = IOMUX_PAD(0x034C, 0x0084, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA09__EPDC_DATA09                      = IOMUX_PAD(0x0350, 0x0088, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA09__ECSPI3_MISO                      = IOMUX_PAD(0x0350, 0x0088, 1, 0x0638, 2, 0),
+	MX6_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                   = IOMUX_PAD(0x0350, 0x0088, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA09__GPIO1_IO16                       = IOMUX_PAD(0x0350, 0x0088, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA10__EPDC_DATA10                      = IOMUX_PAD(0x0354, 0x008C, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA10__ECSPI3_SS0                       = IOMUX_PAD(0x0354, 0x008C, 1, 0x0648, 2, 0),
+	MX6_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                   = IOMUX_PAD(0x0354, 0x008C, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA10__GPIO1_IO17                       = IOMUX_PAD(0x0354, 0x008C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA11__EPDC_DATA11                      = IOMUX_PAD(0x0358, 0x0090, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA11__ECSPI3_SCLK                      = IOMUX_PAD(0x0358, 0x0090, 1, 0x0630, 2, 0),
+	MX6_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                   = IOMUX_PAD(0x0358, 0x0090, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA11__GPIO1_IO18                       = IOMUX_PAD(0x0358, 0x0090, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_DATA12__EPDC_DATA12                      = IOMUX_PAD(0x035C, 0x0094, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA12__UART2_DCE_RX                     = IOMUX_PAD(0x035C, 0x0094, 1, 0x074C, 4, 0),
+	MX6_PAD_EPDC_DATA12__UART2_DTE_TX                     = IOMUX_PAD(0x035C, 0x0094, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA12__EPDC_PWR_COM                     = IOMUX_PAD(0x035C, 0x0094, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA12__GPIO1_IO19                       = IOMUX_PAD(0x035C, 0x0094, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA12__ECSPI3_SS1                       = IOMUX_PAD(0x035C, 0x0094, 6, 0x064C, 1, 0),
+
+	MX6_PAD_EPDC_DATA13__EPDC_DATA13                      = IOMUX_PAD(0x0360, 0x0098, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA13__UART2_DCE_TX                     = IOMUX_PAD(0x0360, 0x0098, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA13__UART2_DTE_RX                     = IOMUX_PAD(0x0360, 0x0098, 1, 0x074C, 5, 0),
+	MX6_PAD_EPDC_DATA13__EPDC_PWR_IRQ                     = IOMUX_PAD(0x0360, 0x0098, 2, 0x0668, 0, 0),
+	MX6_PAD_EPDC_DATA13__GPIO1_IO20                       = IOMUX_PAD(0x0360, 0x0098, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA13__ECSPI3_SS2                       = IOMUX_PAD(0x0360, 0x0098, 6, 0x0640, 1, 0),
+
+	MX6_PAD_EPDC_DATA14__EPDC_DATA14                      = IOMUX_PAD(0x0364, 0x009C, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA14__UART2_DCE_RTS                    = IOMUX_PAD(0x0364, 0x009C, 1, 0x0748, 4, 0),
+	MX6_PAD_EPDC_DATA14__UART2_DTE_CTS                    = IOMUX_PAD(0x0364, 0x009C, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA14__EPDC_PWR_STAT                    = IOMUX_PAD(0x0364, 0x009C, 2, 0x066C, 0, 0),
+	MX6_PAD_EPDC_DATA14__GPIO1_IO21                       = IOMUX_PAD(0x0364, 0x009C, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA14__ECSPI3_SS3                       = IOMUX_PAD(0x0364, 0x009C, 6, 0x0644, 1, 0),
+
+	MX6_PAD_EPDC_DATA15__EPDC_DATA15                      = IOMUX_PAD(0x0368, 0x00A0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA15__UART2_DCE_CTS                    = IOMUX_PAD(0x0368, 0x00A0, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA15__UART2_DTE_RTS                    = IOMUX_PAD(0x0368, 0x00A0, 1, 0x0748, 5, 0),
+	MX6_PAD_EPDC_DATA15__EPDC_PWR_WAKE                    = IOMUX_PAD(0x0368, 0x00A0, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA15__GPIO1_IO22                       = IOMUX_PAD(0x0368, 0x00A0, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_DATA15__ECSPI3_RDY                       = IOMUX_PAD(0x0368, 0x00A0, 6, 0x0634, 1, 0),
+
+	MX6_PAD_EPDC_SDCLK__EPDC_SDCLK_P                      = IOMUX_PAD(0x036C, 0x00A4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCLK__ECSPI2_MOSI                       = IOMUX_PAD(0x036C, 0x00A4, 1, 0x0624, 2, 0),
+	MX6_PAD_EPDC_SDCLK__I2C2_SCL                          = IOMUX_PAD(0x036C, 0x00A4, IOMUX_CONFIG_SION | 2, 0x0684, 2, 0),
+	MX6_PAD_EPDC_SDCLK__CSI_DATA08                        = IOMUX_PAD(0x036C, 0x00A4, 3, 0x05E8, 2, 0),
+	MX6_PAD_EPDC_SDCLK__GPIO1_IO23                        = IOMUX_PAD(0x036C, 0x00A4, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_SDLE__EPDC_SDLE                          = IOMUX_PAD(0x0370, 0x00A8, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDLE__ECSPI2_MISO                        = IOMUX_PAD(0x0370, 0x00A8, 1, 0x0620, 2, 0),
+	MX6_PAD_EPDC_SDLE__I2C2_SDA                           = IOMUX_PAD(0x0370, 0x00A8, IOMUX_CONFIG_SION | 2, 0x0688, 2, 0),
+	MX6_PAD_EPDC_SDLE__CSI_DATA09                         = IOMUX_PAD(0x0370, 0x00A8, 3, 0x05EC, 2, 0),
+	MX6_PAD_EPDC_SDLE__GPIO1_IO24                         = IOMUX_PAD(0x0370, 0x00A8, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_SDOE__EPDC_SDOE                          = IOMUX_PAD(0x0374, 0x00AC, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDOE__ECSPI2_SS0                         = IOMUX_PAD(0x0374, 0x00AC, 1, 0x0628, 1, 0),
+	MX6_PAD_EPDC_SDOE__CSI_DATA10                         = IOMUX_PAD(0x0374, 0x00AC, 3, 0x05B0, 2, 0),
+	MX6_PAD_EPDC_SDOE__GPIO1_IO25                         = IOMUX_PAD(0x0374, 0x00AC, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_SDSHR__EPDC_SDSHR                        = IOMUX_PAD(0x0378, 0x00B0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDSHR__ECSPI2_SCLK                       = IOMUX_PAD(0x0378, 0x00B0, 1, 0x061C, 2, 0),
+	MX6_PAD_EPDC_SDSHR__EPDC_SDCE4                        = IOMUX_PAD(0x0378, 0x00B0, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDSHR__CSI_DATA11                        = IOMUX_PAD(0x0378, 0x00B0, 3, 0x05B4, 2, 0),
+	MX6_PAD_EPDC_SDSHR__GPIO1_IO26                        = IOMUX_PAD(0x0378, 0x00B0, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_SDCE0__EPDC_SDCE0                        = IOMUX_PAD(0x037C, 0x00B4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE0__ECSPI2_SS1                        = IOMUX_PAD(0x037C, 0x00B4, 1, 0x062C, 1, 0),
+	MX6_PAD_EPDC_SDCE0__PWM3_OUT                          = IOMUX_PAD(0x037C, 0x00B4, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE0__GPIO1_IO27                        = IOMUX_PAD(0x037C, 0x00B4, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_SDCE1__EPDC_SDCE1                        = IOMUX_PAD(0x0380, 0x00B8, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE1__WDOG2_B                           = IOMUX_PAD(0x0380, 0x00B8, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE1__PWM4_OUT                          = IOMUX_PAD(0x0380, 0x00B8, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE1__GPIO1_IO28                        = IOMUX_PAD(0x0380, 0x00B8, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_SDCE2__EPDC_SDCE2                        = IOMUX_PAD(0x0384, 0x00BC, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE2__I2C3_SCL                          = IOMUX_PAD(0x0384, 0x00BC, IOMUX_CONFIG_SION | 1, 0x068C, 2, 0),
+	MX6_PAD_EPDC_SDCE2__PWM1_OUT                          = IOMUX_PAD(0x0384, 0x00BC, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE2__GPIO1_IO29                        = IOMUX_PAD(0x0384, 0x00BC, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_SDCE3__EPDC_SDCE3                        = IOMUX_PAD(0x0388, 0x00C0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE3__I2C3_SDA                          = IOMUX_PAD(0x0388, 0x00C0, IOMUX_CONFIG_SION | 1, 0x0690, 2, 0),
+	MX6_PAD_EPDC_SDCE3__PWM2_OUT                          = IOMUX_PAD(0x0388, 0x00C0, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE3__GPIO1_IO30                        = IOMUX_PAD(0x0388, 0x00C0, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_GDCLK__EPDC_GDCLK                        = IOMUX_PAD(0x038C, 0x00C4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDCLK__ECSPI2_SS2                        = IOMUX_PAD(0x038C, 0x00C4, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDCLK__CSI_PIXCLK                        = IOMUX_PAD(0x038C, 0x00C4, 3, 0x05F4, 2, 0),
+	MX6_PAD_EPDC_GDCLK__GPIO1_IO31                        = IOMUX_PAD(0x038C, 0x00C4, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDCLK__SD2_RESET                         = IOMUX_PAD(0x038C, 0x00C4, 6, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_GDOE__EPDC_GDOE                          = IOMUX_PAD(0x0390, 0x00C8, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDOE__ECSPI2_SS3                         = IOMUX_PAD(0x0390, 0x00C8, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDOE__CSI_HSYNC                          = IOMUX_PAD(0x0390, 0x00C8, 3, 0x05F0, 2, 0),
+	MX6_PAD_EPDC_GDOE__GPIO2_IO00                         = IOMUX_PAD(0x0390, 0x00C8, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDOE__SD2_VSELECT                        = IOMUX_PAD(0x0390, 0x00C8, 6, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_GDRL__EPDC_GDRL                          = IOMUX_PAD(0x0394, 0x00CC, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDRL__ECSPI2_RDY                         = IOMUX_PAD(0x0394, 0x00CC, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDRL__CSI_MCLK                           = IOMUX_PAD(0x0394, 0x00CC, 3, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDRL__GPIO2_IO01                         = IOMUX_PAD(0x0394, 0x00CC, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDRL__SD2_WP                             = IOMUX_PAD(0x0394, 0x00CC, 6, 0x077C, 2, 0),
+
+	MX6_PAD_EPDC_GDSP__EPDC_GDSP                          = IOMUX_PAD(0x0398, 0x00D0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDSP__PWM4_OUT                           = IOMUX_PAD(0x0398, 0x00D0, 1, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDSP__CSI_VSYNC                          = IOMUX_PAD(0x0398, 0x00D0, 3, 0x05F8, 2, 0),
+	MX6_PAD_EPDC_GDSP__GPIO2_IO02                         = IOMUX_PAD(0x0398, 0x00D0, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDSP__SD2_CD_B                           = IOMUX_PAD(0x0398, 0x00D0, 6, 0x0778, 2, 0),
+
+	MX6_PAD_EPDC_VCOM0__EPDC_VCOM0                        = IOMUX_PAD(0x039C, 0x00D4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_VCOM0__AUD5_RXFS                         = IOMUX_PAD(0x039C, 0x00D4, 1, 0x0588, 1, 0),
+	MX6_PAD_EPDC_VCOM0__UART3_DCE_RX                      = IOMUX_PAD(0x039C, 0x00D4, 2, 0x0754, 4, 0),
+	MX6_PAD_EPDC_VCOM0__UART3_DTE_TX                      = IOMUX_PAD(0x039C, 0x00D4, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_VCOM0__GPIO2_IO03                        = IOMUX_PAD(0x039C, 0x00D4, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_VCOM0__EPDC_SDCE5                        = IOMUX_PAD(0x039C, 0x00D4, 6, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_VCOM1__EPDC_VCOM1                        = IOMUX_PAD(0x03A0, 0x00D8, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_VCOM1__AUD5_RXD                          = IOMUX_PAD(0x03A0, 0x00D8, 1, 0x057C, 1, 0),
+	MX6_PAD_EPDC_VCOM1__UART3_DCE_TX                      = IOMUX_PAD(0x03A0, 0x00D8, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_VCOM1__UART3_DTE_RX                      = IOMUX_PAD(0x03A0, 0x00D8, 2, 0x0754, 5, 0),
+	MX6_PAD_EPDC_VCOM1__GPIO2_IO04                        = IOMUX_PAD(0x03A0, 0x00D8, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_VCOM1__EPDC_SDCE6                        = IOMUX_PAD(0x03A0, 0x00D8, 6, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_BDR0__EPDC_BDR0                          = IOMUX_PAD(0x03A4, 0x00DC, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_BDR0__UART3_DCE_RTS                      = IOMUX_PAD(0x03A4, 0x00DC, 2, 0x0750, 2, 0),
+	MX6_PAD_EPDC_BDR0__UART3_DTE_CTS                      = IOMUX_PAD(0x03A4, 0x00DC, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_BDR0__GPIO2_IO05                         = IOMUX_PAD(0x03A4, 0x00DC, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_BDR0__EPDC_SDCE7                         = IOMUX_PAD(0x03A4, 0x00DC, 6, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_BDR1__EPDC_BDR1                          = IOMUX_PAD(0x03A8, 0x00E0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_BDR1__UART3_DCE_CTS                      = IOMUX_PAD(0x03A8, 0x00E0, 2, 0x0000, 0, 0),
+	MX6_PAD_EPDC_BDR1__UART3_DTE_RTS                      = IOMUX_PAD(0x03A8, 0x00E0, 2, 0x0750, 3, 0),
+	MX6_PAD_EPDC_BDR1__GPIO2_IO06                         = IOMUX_PAD(0x03A8, 0x00E0, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_BDR1__EPDC_SDCE8                         = IOMUX_PAD(0x03A8, 0x00E0, 6, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                = IOMUX_PAD(0x03AC, 0x00E4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_CTRL0__AUD5_RXC                      = IOMUX_PAD(0x03AC, 0x00E4, 1, 0x0584, 1, 0),
+	MX6_PAD_EPDC_PWR_CTRL0__LCD_DATA16                    = IOMUX_PAD(0x03AC, 0x00E4, 2, 0x0718, 1, 0),
+	MX6_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                    = IOMUX_PAD(0x03AC, 0x00E4, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                = IOMUX_PAD(0x03B0, 0x00E8, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                     = IOMUX_PAD(0x03B0, 0x00E8, 1, 0x0590, 1, 0),
+	MX6_PAD_EPDC_PWR_CTRL1__LCD_DATA17                    = IOMUX_PAD(0x03B0, 0x00E8, 2, 0x071C, 1, 0),
+	MX6_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                    = IOMUX_PAD(0x03B0, 0x00E8, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                = IOMUX_PAD(0x03B4, 0x00EC, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_CTRL2__AUD5_TXD                      = IOMUX_PAD(0x03B4, 0x00EC, 1, 0x0580, 1, 0),
+	MX6_PAD_EPDC_PWR_CTRL2__LCD_DATA18                    = IOMUX_PAD(0x03B4, 0x00EC, 2, 0x0720, 1, 0),
+	MX6_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                    = IOMUX_PAD(0x03B4, 0x00EC, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                = IOMUX_PAD(0x03B8, 0x00F0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_CTRL3__AUD5_TXC                      = IOMUX_PAD(0x03B8, 0x00F0, 1, 0x058C, 1, 0),
+	MX6_PAD_EPDC_PWR_CTRL3__LCD_DATA19                    = IOMUX_PAD(0x03B8, 0x00F0, 2, 0x0724, 1, 0),
+	MX6_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                    = IOMUX_PAD(0x03B8, 0x00F0, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWR_COM__EPDC_PWR_COM                    = IOMUX_PAD(0x03BC, 0x00F4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_COM__LCD_DATA20                      = IOMUX_PAD(0x03BC, 0x00F4, 2, 0x0728, 1, 0),
+	MX6_PAD_EPDC_PWR_COM__USB_OTG1_ID                     = IOMUX_PAD(0x03BC, 0x00F4, 4, 0x055C, 4, 0),
+	MX6_PAD_EPDC_PWR_COM__GPIO2_IO11                      = IOMUX_PAD(0x03BC, 0x00F4, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_COM__SD3_RESET                       = IOMUX_PAD(0x03BC, 0x00F4, 6, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                    = IOMUX_PAD(0x03C0, 0x00F8, 0, 0x0668, 1, 0),
+	MX6_PAD_EPDC_PWR_IRQ__LCD_DATA21                      = IOMUX_PAD(0x03C0, 0x00F8, 2, 0x072C, 1, 0),
+	MX6_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                     = IOMUX_PAD(0x03C0, 0x00F8, 4, 0x0560, 3, 0),
+	MX6_PAD_EPDC_PWR_IRQ__GPIO2_IO12                      = IOMUX_PAD(0x03C0, 0x00F8, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_IRQ__SD3_VSELECT                     = IOMUX_PAD(0x03C0, 0x00F8, 6, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                  = IOMUX_PAD(0x03C4, 0x00FC, 0, 0x066C, 1, 0),
+	MX6_PAD_EPDC_PWR_STAT__LCD_DATA22                     = IOMUX_PAD(0x03C4, 0x00FC, 2, 0x0730, 1, 0),
+	MX6_PAD_EPDC_PWR_STAT__ARM_EVENTI                     = IOMUX_PAD(0x03C4, 0x00FC, 4, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_STAT__GPIO2_IO13                     = IOMUX_PAD(0x03C4, 0x00FC, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_STAT__SD3_WP                         = IOMUX_PAD(0x03C4, 0x00FC, 6, 0x0794, 2, 0),
+
+	MX6_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                  = IOMUX_PAD(0x03C8, 0x0100, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_WAKE__LCD_DATA23                     = IOMUX_PAD(0x03C8, 0x0100, 2, 0x0734, 1, 0),
+	MX6_PAD_EPDC_PWR_WAKE__ARM_EVENTO                     = IOMUX_PAD(0x03C8, 0x0100, 4, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_WAKE__GPIO2_IO14                     = IOMUX_PAD(0x03C8, 0x0100, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWR_WAKE__SD3_CD_B                       = IOMUX_PAD(0x03C8, 0x0100, 6, 0x0780, 2, 0),
+
+	MX6_PAD_LCD_CLK__LCD_CLK                              = IOMUX_PAD(0x03CC, 0x0104, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__LCD_WR_RWN                           = IOMUX_PAD(0x03CC, 0x0104, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__PWM4_OUT                             = IOMUX_PAD(0x03CC, 0x0104, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__GPIO2_IO15                           = IOMUX_PAD(0x03CC, 0x0104, 5, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_ENABLE__LCD_ENABLE                        = IOMUX_PAD(0x03D0, 0x0108, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__LCD_RD_E                          = IOMUX_PAD(0x03D0, 0x0108, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__UART2_DCE_RX                      = IOMUX_PAD(0x03D0, 0x0108, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__UART2_DTE_TX                      = IOMUX_PAD(0x03D0, 0x0108, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__GPIO2_IO16                        = IOMUX_PAD(0x03D0, 0x0108, 5, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_HSYNC__LCD_HSYNC                          = IOMUX_PAD(0x03D4, 0x010C, 0, 0x06D4, 0, 0),
+	MX6_PAD_LCD_HSYNC__LCD_CS                             = IOMUX_PAD(0x03D4, 0x010C, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__UART2_DCE_TX                       = IOMUX_PAD(0x03D4, 0x010C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__UART2_DTE_RX                       = IOMUX_PAD(0x03D4, 0x010C, 4, 0x074C, 1, 0),
+	MX6_PAD_LCD_HSYNC__GPIO2_IO17                         = IOMUX_PAD(0x03D4, 0x010C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__ARM_TRACE_CLK                      = IOMUX_PAD(0x03D4, 0x010C, 6, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_VSYNC__LCD_VSYNC                          = IOMUX_PAD(0x03D8, 0x0110, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__LCD_RS                             = IOMUX_PAD(0x03D8, 0x0110, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__UART2_DCE_RTS                      = IOMUX_PAD(0x03D8, 0x0110, 4, 0x0748, 0, 0),
+	MX6_PAD_LCD_VSYNC__UART2_DTE_CTS                      = IOMUX_PAD(0x03D8, 0x0110, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__GPIO2_IO18                         = IOMUX_PAD(0x03D8, 0x0110, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__ARM_TRACE_CTL                      = IOMUX_PAD(0x03D8, 0x0110, 6, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_RESET__LCD_RESET                          = IOMUX_PAD(0x03DC, 0x0114, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__LCD_BUSY                           = IOMUX_PAD(0x03DC, 0x0114, 2, 0x06D4, 1, 0),
+	MX6_PAD_LCD_RESET__UART2_DCE_CTS                      = IOMUX_PAD(0x03DC, 0x0114, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__UART2_DTE_RTS                      = IOMUX_PAD(0x03DC, 0x0114, 4, 0x0748, 1, 0),
+	MX6_PAD_LCD_RESET__GPIO2_IO19                         = IOMUX_PAD(0x03DC, 0x0114, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__CCM_PMIC_READY                     = IOMUX_PAD(0x03DC, 0x0114, 6, 0x05AC, 2, 0),
+
+	MX6_PAD_LCD_DATA00__LCD_DATA00                        = IOMUX_PAD(0x03E0, 0x0118, 0, 0x06D8, 1, 0),
+	MX6_PAD_LCD_DATA00__ECSPI1_MOSI                       = IOMUX_PAD(0x03E0, 0x0118, 1, 0x0608, 0, 0),
+	MX6_PAD_LCD_DATA00__USB_OTG2_ID                       = IOMUX_PAD(0x03E0, 0x0118, 2, 0x0560, 2, 0),
+	MX6_PAD_LCD_DATA00__PWM1_OUT                          = IOMUX_PAD(0x03E0, 0x0118, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__UART5_DTR_B                       = IOMUX_PAD(0x03E0, 0x0118, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__GPIO2_IO20                        = IOMUX_PAD(0x03E0, 0x0118, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__ARM_TRACE00                       = IOMUX_PAD(0x03E0, 0x0118, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__SRC_BOOT_CFG00                    = IOMUX_PAD(0x03E0, 0x0118, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA01__LCD_DATA01                        = IOMUX_PAD(0x03E4, 0x011C, 0, 0x06DC, 1, 0),
+	MX6_PAD_LCD_DATA01__ECSPI1_MISO                       = IOMUX_PAD(0x03E4, 0x011C, 1, 0x0604, 0, 0),
+	MX6_PAD_LCD_DATA01__USB_OTG1_ID                       = IOMUX_PAD(0x03E4, 0x011C, 2, 0x055C, 3, 0),
+	MX6_PAD_LCD_DATA01__PWM2_OUT                          = IOMUX_PAD(0x03E4, 0x011C, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__AUD4_RXFS                         = IOMUX_PAD(0x03E4, 0x011C, 4, 0x0570, 0, 0),
+	MX6_PAD_LCD_DATA01__GPIO2_IO21                        = IOMUX_PAD(0x03E4, 0x011C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__ARM_TRACE01                       = IOMUX_PAD(0x03E4, 0x011C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__SRC_BOOT_CFG01                    = IOMUX_PAD(0x03E4, 0x011C, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA02__LCD_DATA02                        = IOMUX_PAD(0x03E8, 0x0120, 0, 0x06E0, 1, 0),
+	MX6_PAD_LCD_DATA02__ECSPI1_SS0                        = IOMUX_PAD(0x03E8, 0x0120, 1, 0x0614, 0, 0),
+	MX6_PAD_LCD_DATA02__EPIT2_OUT                         = IOMUX_PAD(0x03E8, 0x0120, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__PWM3_OUT                          = IOMUX_PAD(0x03E8, 0x0120, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__AUD4_RXC                          = IOMUX_PAD(0x03E8, 0x0120, 4, 0x056C, 0, 0),
+	MX6_PAD_LCD_DATA02__GPIO2_IO22                        = IOMUX_PAD(0x03E8, 0x0120, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__ARM_TRACE02                       = IOMUX_PAD(0x03E8, 0x0120, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__SRC_BOOT_CFG02                    = IOMUX_PAD(0x03E8, 0x0120, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA03__LCD_DATA03                        = IOMUX_PAD(0x03EC, 0x0124, 0, 0x06E4, 1, 0),
+	MX6_PAD_LCD_DATA03__ECSPI1_SCLK                       = IOMUX_PAD(0x03EC, 0x0124, 1, 0x05FC, 0, 0),
+	MX6_PAD_LCD_DATA03__UART5_DSR_B                       = IOMUX_PAD(0x03EC, 0x0124, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__PWM4_OUT                          = IOMUX_PAD(0x03EC, 0x0124, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__AUD4_RXD                          = IOMUX_PAD(0x03EC, 0x0124, 4, 0x0564, 0, 0),
+	MX6_PAD_LCD_DATA03__GPIO2_IO23                        = IOMUX_PAD(0x03EC, 0x0124, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__ARM_TRACE03                       = IOMUX_PAD(0x03EC, 0x0124, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__SRC_BOOT_CFG03                    = IOMUX_PAD(0x03EC, 0x0124, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA04__LCD_DATA04                        = IOMUX_PAD(0x03F0, 0x0128, 0, 0x06E8, 1, 0),
+	MX6_PAD_LCD_DATA04__ECSPI1_SS1                        = IOMUX_PAD(0x03F0, 0x0128, 1, 0x060C, 1, 0),
+	MX6_PAD_LCD_DATA04__CSI_VSYNC                         = IOMUX_PAD(0x03F0, 0x0128, 2, 0x05F8, 0, 0),
+	MX6_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                 = IOMUX_PAD(0x03F0, 0x0128, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__AUD4_TXC                          = IOMUX_PAD(0x03F0, 0x0128, 4, 0x0574, 0, 0),
+	MX6_PAD_LCD_DATA04__GPIO2_IO24                        = IOMUX_PAD(0x03F0, 0x0128, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__ARM_TRACE04                       = IOMUX_PAD(0x03F0, 0x0128, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__SRC_BOOT_CFG04                    = IOMUX_PAD(0x03F0, 0x0128, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA05__LCD_DATA05                        = IOMUX_PAD(0x03F4, 0x012C, 0, 0x06EC, 1, 0),
+	MX6_PAD_LCD_DATA05__ECSPI1_SS2                        = IOMUX_PAD(0x03F4, 0x012C, 1, 0x0610, 1, 0),
+	MX6_PAD_LCD_DATA05__CSI_HSYNC                         = IOMUX_PAD(0x03F4, 0x012C, 2, 0x05F0, 0, 0),
+	MX6_PAD_LCD_DATA05__AUD4_TXFS                         = IOMUX_PAD(0x03F4, 0x012C, 4, 0x0578, 0, 0),
+	MX6_PAD_LCD_DATA05__GPIO2_IO25                        = IOMUX_PAD(0x03F4, 0x012C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__ARM_TRACE05                       = IOMUX_PAD(0x03F4, 0x012C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__SRC_BOOT_CFG05                    = IOMUX_PAD(0x03F4, 0x012C, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA06__LCD_DATA06                        = IOMUX_PAD(0x03F8, 0x0130, 0, 0x06F0, 1, 0),
+	MX6_PAD_LCD_DATA06__ECSPI1_SS3                        = IOMUX_PAD(0x03F8, 0x0130, 1, 0x0618, 0, 0),
+	MX6_PAD_LCD_DATA06__CSI_PIXCLK                        = IOMUX_PAD(0x03F8, 0x0130, 2, 0x05F4, 0, 0),
+	MX6_PAD_LCD_DATA06__AUD4_TXD                          = IOMUX_PAD(0x03F8, 0x0130, 4, 0x0568, 0, 0),
+	MX6_PAD_LCD_DATA06__GPIO2_IO26                        = IOMUX_PAD(0x03F8, 0x0130, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__ARM_TRACE06                       = IOMUX_PAD(0x03F8, 0x0130, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__SRC_BOOT_CFG06                    = IOMUX_PAD(0x03F8, 0x0130, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA07__LCD_DATA07                        = IOMUX_PAD(0x03FC, 0x0134, 0, 0x06F4, 0, 0),
+	MX6_PAD_LCD_DATA07__ECSPI1_RDY                        = IOMUX_PAD(0x03FC, 0x0134, 1, 0x0600, 0, 0),
+	MX6_PAD_LCD_DATA07__CSI_MCLK                          = IOMUX_PAD(0x03FC, 0x0134, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__AUDIO_CLK_OUT                     = IOMUX_PAD(0x03FC, 0x0134, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__GPIO2_IO27                        = IOMUX_PAD(0x03FC, 0x0134, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__ARM_TRACE07                       = IOMUX_PAD(0x03FC, 0x0134, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__SRC_BOOT_CFG07                    = IOMUX_PAD(0x03FC, 0x0134, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA08__LCD_DATA08                        = IOMUX_PAD(0x0400, 0x0138, 0, 0x06F8, 0, 0),
+	MX6_PAD_LCD_DATA08__KEY_COL0                          = IOMUX_PAD(0x0400, 0x0138, 1, 0x06A0, 1, 0),
+	MX6_PAD_LCD_DATA08__CSI_DATA09                        = IOMUX_PAD(0x0400, 0x0138, 2, 0x05EC, 0, 0),
+	MX6_PAD_LCD_DATA08__ECSPI2_SCLK                       = IOMUX_PAD(0x0400, 0x0138, 4, 0x061C, 0, 0),
+	MX6_PAD_LCD_DATA08__GPIO2_IO28                        = IOMUX_PAD(0x0400, 0x0138, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__ARM_TRACE08                       = IOMUX_PAD(0x0400, 0x0138, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__SRC_BOOT_CFG08                    = IOMUX_PAD(0x0400, 0x0138, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA09__LCD_DATA09                        = IOMUX_PAD(0x0404, 0x013C, 0, 0x06FC, 0, 0),
+	MX6_PAD_LCD_DATA09__KEY_ROW0                          = IOMUX_PAD(0x0404, 0x013C, 1, 0x06C0, 1, 0),
+	MX6_PAD_LCD_DATA09__CSI_DATA08                        = IOMUX_PAD(0x0404, 0x013C, 2, 0x05E8, 0, 0),
+	MX6_PAD_LCD_DATA09__ECSPI2_MOSI                       = IOMUX_PAD(0x0404, 0x013C, 4, 0x0624, 0, 0),
+	MX6_PAD_LCD_DATA09__GPIO2_IO29                        = IOMUX_PAD(0x0404, 0x013C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__ARM_TRACE09                       = IOMUX_PAD(0x0404, 0x013C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__SRC_BOOT_CFG09                    = IOMUX_PAD(0x0404, 0x013C, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA10__LCD_DATA10                        = IOMUX_PAD(0x0408, 0x0140, 0, 0x0700, 1, 0),
+	MX6_PAD_LCD_DATA10__KEY_COL1                          = IOMUX_PAD(0x0408, 0x0140, 1, 0x06A4, 1, 0),
+	MX6_PAD_LCD_DATA10__CSI_DATA07                        = IOMUX_PAD(0x0408, 0x0140, 2, 0x05E4, 0, 0),
+	MX6_PAD_LCD_DATA10__ECSPI2_MISO                       = IOMUX_PAD(0x0408, 0x0140, 4, 0x0620, 0, 0),
+	MX6_PAD_LCD_DATA10__GPIO2_IO30                        = IOMUX_PAD(0x0408, 0x0140, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__ARM_TRACE10                       = IOMUX_PAD(0x0408, 0x0140, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__SRC_BOOT_CFG10                    = IOMUX_PAD(0x0408, 0x0140, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA11__LCD_DATA11                        = IOMUX_PAD(0x040C, 0x0144, 0, 0x0704, 0, 0),
+	MX6_PAD_LCD_DATA11__KEY_ROW1                          = IOMUX_PAD(0x040C, 0x0144, 1, 0x06C4, 1, 0),
+	MX6_PAD_LCD_DATA11__CSI_DATA06                        = IOMUX_PAD(0x040C, 0x0144, 2, 0x05E0, 0, 0),
+	MX6_PAD_LCD_DATA11__ECSPI2_SS1                        = IOMUX_PAD(0x040C, 0x0144, 4, 0x062C, 0, 0),
+	MX6_PAD_LCD_DATA11__GPIO2_IO31                        = IOMUX_PAD(0x040C, 0x0144, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__ARM_TRACE11                       = IOMUX_PAD(0x040C, 0x0144, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__SRC_BOOT_CFG11                    = IOMUX_PAD(0x040C, 0x0144, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA12__LCD_DATA12                        = IOMUX_PAD(0x0410, 0x0148, 0, 0x0708, 0, 0),
+	MX6_PAD_LCD_DATA12__KEY_COL2                          = IOMUX_PAD(0x0410, 0x0148, 1, 0x06A8, 1, 0),
+	MX6_PAD_LCD_DATA12__CSI_DATA05                        = IOMUX_PAD(0x0410, 0x0148, 2, 0x05DC, 0, 0),
+	MX6_PAD_LCD_DATA12__UART5_DCE_RTS                     = IOMUX_PAD(0x0410, 0x0148, 4, 0x0760, 0, 0),
+	MX6_PAD_LCD_DATA12__UART5_DTE_CTS                     = IOMUX_PAD(0x0410, 0x0148, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__GPIO3_IO00                        = IOMUX_PAD(0x0410, 0x0148, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__ARM_TRACE12                       = IOMUX_PAD(0x0410, 0x0148, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__SRC_BOOT_CFG12                    = IOMUX_PAD(0x0410, 0x0148, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA13__LCD_DATA13                        = IOMUX_PAD(0x0414, 0x014C, 0, 0x070C, 0, 0),
+	MX6_PAD_LCD_DATA13__KEY_ROW2                          = IOMUX_PAD(0x0414, 0x014C, 1, 0x06C8, 1, 0),
+	MX6_PAD_LCD_DATA13__CSI_DATA04                        = IOMUX_PAD(0x0414, 0x014C, 2, 0x05D8, 0, 0),
+	MX6_PAD_LCD_DATA13__UART5_DCE_CTS                     = IOMUX_PAD(0x0414, 0x014C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__UART5_DTE_RTS                     = IOMUX_PAD(0x0414, 0x014C, 4, 0x0760, 1, 0),
+	MX6_PAD_LCD_DATA13__GPIO3_IO01                        = IOMUX_PAD(0x0414, 0x014C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__ARM_TRACE13                       = IOMUX_PAD(0x0414, 0x014C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__SRC_BOOT_CFG13                    = IOMUX_PAD(0x0414, 0x014C, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA14__LCD_DATA14                        = IOMUX_PAD(0x0418, 0x0150, 0, 0x0710, 0, 0),
+	MX6_PAD_LCD_DATA14__KEY_COL3                          = IOMUX_PAD(0x0418, 0x0150, 1, 0x06AC, 1, 0),
+	MX6_PAD_LCD_DATA14__CSI_DATA03                        = IOMUX_PAD(0x0418, 0x0150, 2, 0x05D4, 0, 0),
+	MX6_PAD_LCD_DATA14__UART5_DCE_RX                      = IOMUX_PAD(0x0418, 0x0150, 4, 0x0764, 0, 0),
+	MX6_PAD_LCD_DATA14__UART5_DTE_TX                      = IOMUX_PAD(0x0418, 0x0150, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__GPIO3_IO02                        = IOMUX_PAD(0x0418, 0x0150, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__ARM_TRACE14                       = IOMUX_PAD(0x0418, 0x0150, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__SRC_BOOT_CFG14                    = IOMUX_PAD(0x0418, 0x0150, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA15__LCD_DATA15                        = IOMUX_PAD(0x041C, 0x0154, 0, 0x0714, 0, 0),
+	MX6_PAD_LCD_DATA15__KEY_ROW3                          = IOMUX_PAD(0x041C, 0x0154, 1, 0x06CC, 0, 0),
+	MX6_PAD_LCD_DATA15__CSI_DATA02                        = IOMUX_PAD(0x041C, 0x0154, 2, 0x05D0, 0, 0),
+	MX6_PAD_LCD_DATA15__UART5_DCE_TX                      = IOMUX_PAD(0x041C, 0x0154, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__UART5_DTE_RX                      = IOMUX_PAD(0x041C, 0x0154, 4, 0x0764, 1, 0),
+	MX6_PAD_LCD_DATA15__GPIO3_IO03                        = IOMUX_PAD(0x041C, 0x0154, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__ARM_TRACE15                       = IOMUX_PAD(0x041C, 0x0154, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__SRC_BOOT_CFG15                    = IOMUX_PAD(0x041C, 0x0154, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA16__LCD_DATA16                        = IOMUX_PAD(0x0420, 0x0158, 0, 0x0718, 0, 0),
+	MX6_PAD_LCD_DATA16__KEY_COL4                          = IOMUX_PAD(0x0420, 0x0158, 1, 0x06B0, 0, 0),
+	MX6_PAD_LCD_DATA16__CSI_DATA01                        = IOMUX_PAD(0x0420, 0x0158, 2, 0x05CC, 0, 0),
+	MX6_PAD_LCD_DATA16__I2C2_SCL                          = IOMUX_PAD(0x0420, 0x0158, IOMUX_CONFIG_SION | 4, 0x0684, 1, 0),
+	MX6_PAD_LCD_DATA16__GPIO3_IO04                        = IOMUX_PAD(0x0420, 0x0158, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__SRC_BOOT_CFG24                    = IOMUX_PAD(0x0420, 0x0158, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA17__LCD_DATA17                        = IOMUX_PAD(0x0424, 0x015C, 0, 0x071C, 0, 0),
+	MX6_PAD_LCD_DATA17__KEY_ROW4                          = IOMUX_PAD(0x0424, 0x015C, 1, 0x06D0, 0, 0),
+	MX6_PAD_LCD_DATA17__CSI_DATA00                        = IOMUX_PAD(0x0424, 0x015C, 2, 0x05C8, 0, 0),
+	MX6_PAD_LCD_DATA17__I2C2_SDA                          = IOMUX_PAD(0x0424, 0x015C, IOMUX_CONFIG_SION | 4, 0x0688, 1, 0),
+	MX6_PAD_LCD_DATA17__GPIO3_IO05                        = IOMUX_PAD(0x0424, 0x015C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__SRC_BOOT_CFG25                    = IOMUX_PAD(0x0424, 0x015C, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA18__LCD_DATA18                        = IOMUX_PAD(0x0428, 0x0160, 0, 0x0720, 0, 0),
+	MX6_PAD_LCD_DATA18__KEY_COL5                          = IOMUX_PAD(0x0428, 0x0160, 1, 0x0694, 2, 0),
+	MX6_PAD_LCD_DATA18__CSI_DATA15                        = IOMUX_PAD(0x0428, 0x0160, 2, 0x05C4, 1, 0),
+	MX6_PAD_LCD_DATA18__GPT_CAPTURE1                      = IOMUX_PAD(0x0428, 0x0160, 4, 0x0670, 1, 0),
+	MX6_PAD_LCD_DATA18__GPIO3_IO06                        = IOMUX_PAD(0x0428, 0x0160, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__SRC_BOOT_CFG26                    = IOMUX_PAD(0x0428, 0x0160, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA19__LCD_DATA19                        = IOMUX_PAD(0x042C, 0x0164, 0, 0x0724, 0, 0),
+	MX6_PAD_LCD_DATA19__KEY_ROW5                          = IOMUX_PAD(0x042C, 0x0164, 1, 0x06B4, 1, 0),
+	MX6_PAD_LCD_DATA19__CSI_DATA14                        = IOMUX_PAD(0x042C, 0x0164, 2, 0x05C0, 2, 0),
+	MX6_PAD_LCD_DATA19__GPT_CAPTURE2                      = IOMUX_PAD(0x042C, 0x0164, 4, 0x0674, 1, 0),
+	MX6_PAD_LCD_DATA19__GPIO3_IO07                        = IOMUX_PAD(0x042C, 0x0164, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__SRC_BOOT_CFG27                    = IOMUX_PAD(0x042C, 0x0164, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA20__LCD_DATA20                        = IOMUX_PAD(0x0430, 0x0168, 0, 0x0728, 0, 0),
+	MX6_PAD_LCD_DATA20__KEY_COL6                          = IOMUX_PAD(0x0430, 0x0168, 1, 0x0698, 1, 0),
+	MX6_PAD_LCD_DATA20__CSI_DATA13                        = IOMUX_PAD(0x0430, 0x0168, 2, 0x05BC, 2, 0),
+	MX6_PAD_LCD_DATA20__GPT_COMPARE1                      = IOMUX_PAD(0x0430, 0x0168, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__GPIO3_IO08                        = IOMUX_PAD(0x0430, 0x0168, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__SRC_BOOT_CFG28                    = IOMUX_PAD(0x0430, 0x0168, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA21__LCD_DATA21                        = IOMUX_PAD(0x0434, 0x016C, 0, 0x072C, 0, 0),
+	MX6_PAD_LCD_DATA21__KEY_ROW6                          = IOMUX_PAD(0x0434, 0x016C, 1, 0x06B8, 1, 0),
+	MX6_PAD_LCD_DATA21__CSI_DATA12                        = IOMUX_PAD(0x0434, 0x016C, 2, 0x05B8, 2, 0),
+	MX6_PAD_LCD_DATA21__GPT_COMPARE2                      = IOMUX_PAD(0x0434, 0x016C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__GPIO3_IO09                        = IOMUX_PAD(0x0434, 0x016C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__SRC_BOOT_CFG29                    = IOMUX_PAD(0x0434, 0x016C, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA22__LCD_DATA22                        = IOMUX_PAD(0x0438, 0x0170, 0, 0x0730, 0, 0),
+	MX6_PAD_LCD_DATA22__KEY_COL7                          = IOMUX_PAD(0x0438, 0x0170, 1, 0x069C, 1, 0),
+	MX6_PAD_LCD_DATA22__CSI_DATA11                        = IOMUX_PAD(0x0438, 0x0170, 2, 0x05B4, 1, 0),
+	MX6_PAD_LCD_DATA22__GPT_COMPARE3                      = IOMUX_PAD(0x0438, 0x0170, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__GPIO3_IO10                        = IOMUX_PAD(0x0438, 0x0170, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__SRC_BOOT_CFG30                    = IOMUX_PAD(0x0438, 0x0170, 7, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA23__LCD_DATA23                        = IOMUX_PAD(0x043C, 0x0174, 0, 0x0734, 0, 0),
+	MX6_PAD_LCD_DATA23__KEY_ROW7                          = IOMUX_PAD(0x043C, 0x0174, 1, 0x06BC, 1, 0),
+	MX6_PAD_LCD_DATA23__CSI_DATA10                        = IOMUX_PAD(0x043C, 0x0174, 2, 0x05B0, 1, 0),
+	MX6_PAD_LCD_DATA23__GPT_CLKIN                         = IOMUX_PAD(0x043C, 0x0174, 4, 0x0678, 1, 0),
+	MX6_PAD_LCD_DATA23__GPIO3_IO11                        = IOMUX_PAD(0x043C, 0x0174, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__SRC_BOOT_CFG31                    = IOMUX_PAD(0x043C, 0x0174, 7, 0x0000, 0, 0),
+
+	MX6_PAD_AUD_RXFS__AUD3_RXFS                           = IOMUX_PAD(0x0440, 0x0178, 0, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXFS__I2C1_SCL                            = IOMUX_PAD(0x0440, 0x0178, IOMUX_CONFIG_SION | 1, 0x067C, 1, 0),
+	MX6_PAD_AUD_RXFS__UART3_DCE_RX                        = IOMUX_PAD(0x0440, 0x0178, 2, 0x0754, 0, 0),
+	MX6_PAD_AUD_RXFS__UART3_DTE_TX                        = IOMUX_PAD(0x0440, 0x0178, 2, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXFS__I2C3_SCL                            = IOMUX_PAD(0x0440, 0x0178, IOMUX_CONFIG_SION | 4, 0x068C, 1, 0),
+	MX6_PAD_AUD_RXFS__GPIO1_IO00                          = IOMUX_PAD(0x0440, 0x0178, 5, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXFS__ECSPI3_SS0                          = IOMUX_PAD(0x0440, 0x0178, 6, 0x0648, 0, 0),
+	MX6_PAD_AUD_RXFS__MBIST_BEND                          = IOMUX_PAD(0x0440, 0x0178, 7, 0x0000, 0, 0),
+
+	MX6_PAD_AUD_RXC__AUD3_RXC                             = IOMUX_PAD(0x0444, 0x017C, 0, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXC__I2C1_SDA                             = IOMUX_PAD(0x0444, 0x017C, IOMUX_CONFIG_SION | 1, 0x0680, 1, 0),
+	MX6_PAD_AUD_RXC__UART3_DCE_TX                         = IOMUX_PAD(0x0444, 0x017C, 2, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXC__UART3_DTE_RX                         = IOMUX_PAD(0x0444, 0x017C, 2, 0x0754, 1, 0),
+	MX6_PAD_AUD_RXC__I2C3_SDA                             = IOMUX_PAD(0x0444, 0x017C, IOMUX_CONFIG_SION | 4, 0x0690, 1, 0),
+	MX6_PAD_AUD_RXC__GPIO1_IO01                           = IOMUX_PAD(0x0444, 0x017C, 5, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXC__ECSPI3_SS1                           = IOMUX_PAD(0x0444, 0x017C, 6, 0x064C, 0, 0),
+
+	MX6_PAD_AUD_RXD__AUD3_RXD                             = IOMUX_PAD(0x0448, 0x0180, 0, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXD__ECSPI3_MOSI                          = IOMUX_PAD(0x0448, 0x0180, 1, 0x063C, 0, 0),
+	MX6_PAD_AUD_RXD__UART4_DCE_RX                         = IOMUX_PAD(0x0448, 0x0180, 2, 0x075C, 0, 0),
+	MX6_PAD_AUD_RXD__UART4_DTE_TX                         = IOMUX_PAD(0x0448, 0x0180, 2, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXD__SD1_LCTL                             = IOMUX_PAD(0x0448, 0x0180, 4, 0x0000, 0, 0),
+	MX6_PAD_AUD_RXD__GPIO1_IO02                           = IOMUX_PAD(0x0448, 0x0180, 5, 0x0000, 0, 0),
+
+	MX6_PAD_AUD_TXC__AUD3_TXC                             = IOMUX_PAD(0x044C, 0x0184, 0, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXC__ECSPI3_MISO                          = IOMUX_PAD(0x044C, 0x0184, 1, 0x0638, 0, 0),
+	MX6_PAD_AUD_TXC__UART4_DCE_TX                         = IOMUX_PAD(0x044C, 0x0184, 2, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXC__UART4_DTE_RX                         = IOMUX_PAD(0x044C, 0x0184, 2, 0x075C, 1, 0),
+	MX6_PAD_AUD_TXC__SD2_LCTL                             = IOMUX_PAD(0x044C, 0x0184, 4, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXC__GPIO1_IO03                           = IOMUX_PAD(0x044C, 0x0184, 5, 0x0000, 0, 0),
+
+	MX6_PAD_AUD_TXFS__AUD3_TXFS                           = IOMUX_PAD(0x0450, 0x0188, 0, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXFS__PWM3_OUT                            = IOMUX_PAD(0x0450, 0x0188, 1, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXFS__UART4_DCE_RTS                       = IOMUX_PAD(0x0450, 0x0188, 2, 0x0758, 0, 0),
+	MX6_PAD_AUD_TXFS__UART4_DTE_CTS                       = IOMUX_PAD(0x0450, 0x0188, 2, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXFS__SD3_LCTL                            = IOMUX_PAD(0x0450, 0x0188, 4, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXFS__GPIO1_IO04                          = IOMUX_PAD(0x0450, 0x0188, 5, 0x0000, 0, 0),
+
+	MX6_PAD_AUD_TXD__AUD3_TXD                             = IOMUX_PAD(0x0454, 0x018C, 0, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXD__ECSPI3_SCLK                          = IOMUX_PAD(0x0454, 0x018C, 1, 0x0630, 0, 0),
+	MX6_PAD_AUD_TXD__UART4_DCE_CTS                        = IOMUX_PAD(0x0454, 0x018C, 2, 0x0000, 0, 0),
+	MX6_PAD_AUD_TXD__UART4_DTE_RTS                        = IOMUX_PAD(0x0454, 0x018C, 2, 0x0758, 1, 0),
+	MX6_PAD_AUD_TXD__GPIO1_IO05                           = IOMUX_PAD(0x0454, 0x018C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_AUD_MCLK__AUDIO_CLK_OUT                       = IOMUX_PAD(0x0458, 0x0190, 0, 0x0000, 0, 0),
+	MX6_PAD_AUD_MCLK__PWM4_OUT                            = IOMUX_PAD(0x0458, 0x0190, 1, 0x0000, 0, 0),
+	MX6_PAD_AUD_MCLK__ECSPI3_RDY                          = IOMUX_PAD(0x0458, 0x0190, 2, 0x0634, 0, 0),
+	MX6_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                   = IOMUX_PAD(0x0458, 0x0190, 4, 0x0000, 0, 0),
+	MX6_PAD_AUD_MCLK__GPIO1_IO06                          = IOMUX_PAD(0x0458, 0x0190, 5, 0x0000, 0, 0),
+	MX6_PAD_AUD_MCLK__SPDIF_EXT_CLK                       = IOMUX_PAD(0x0458, 0x0190, 6, 0x073C, 1, 0),
+
+	MX6_PAD_UART1_RXD__UART1_DCE_RX                       = IOMUX_PAD(0x045C, 0x0194, 0, 0x0744, 0, 0),
+
+	MX6_PAD_UART1_RXD__UART1_DTE_TX                       = IOMUX_PAD(0x045C, 0x0194, 0, 0x0000, 0, 0),
+	MX6_PAD_UART1_RXD__PWM1_OUT                           = IOMUX_PAD(0x045C, 0x0194, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_RXD__UART4_DCE_RX                       = IOMUX_PAD(0x045C, 0x0194, 2, 0x075C, 4, 0),
+	MX6_PAD_UART1_RXD__UART4_DTE_TX                       = IOMUX_PAD(0x045C, 0x0194, 2, 0x0000, 0, 0),
+	MX6_PAD_UART1_RXD__UART5_DCE_RX                       = IOMUX_PAD(0x045C, 0x0194, 4, 0x0764, 6, 0),
+	MX6_PAD_UART1_RXD__UART5_DTE_TX                       = IOMUX_PAD(0x045C, 0x0194, 4, 0x0000, 0, 0),
+	MX6_PAD_UART1_RXD__GPIO3_IO16                         = IOMUX_PAD(0x045C, 0x0194, 5, 0x0000, 0, 0),
+
+	MX6_PAD_UART1_TXD__UART1_DCE_TX                       = IOMUX_PAD(0x0460, 0x0198, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART1_TXD__UART1_DTE_RX                       = IOMUX_PAD(0x0460, 0x0198, 0, 0x0744, 1, 0),
+	MX6_PAD_UART1_TXD__PWM2_OUT                           = IOMUX_PAD(0x0460, 0x0198, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_TXD__UART4_DCE_TX                       = IOMUX_PAD(0x0460, 0x0198, 2, 0x0000, 0, 0),
+	MX6_PAD_UART1_TXD__UART4_DTE_RX                       = IOMUX_PAD(0x0460, 0x0198, 2, 0x075C, 5, 0),
+	MX6_PAD_UART1_TXD__UART5_DCE_TX                       = IOMUX_PAD(0x0460, 0x0198, 4, 0x0000, 0, 0),
+	MX6_PAD_UART1_TXD__UART5_DTE_RX                       = IOMUX_PAD(0x0460, 0x0198, 4, 0x0764, 7, 0),
+	MX6_PAD_UART1_TXD__GPIO3_IO17                         = IOMUX_PAD(0x0460, 0x0198, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_TXD__UART5_DCD_B                        = IOMUX_PAD(0x0460, 0x0198, 7, 0x0000, 0, 0),
+
+	MX6_PAD_I2C1_SCL__I2C1_SCL                            = IOMUX_PAD(0x0464, 0x019C, IOMUX_CONFIG_SION | 0, 0x067C, 0, 0),
+	MX6_PAD_I2C1_SCL__UART1_DCE_RTS                       = IOMUX_PAD(0x0464, 0x019C, 1, 0x0740, 0, 0),
+	MX6_PAD_I2C1_SCL__UART1_DTE_CTS                       = IOMUX_PAD(0x0464, 0x019C, 1, 0x0000, 0, 0),
+	MX6_PAD_I2C1_SCL__ECSPI3_SS2                          = IOMUX_PAD(0x0464, 0x019C, 2, 0x0640, 0, 0),
+	MX6_PAD_I2C1_SCL__SD3_RESET                           = IOMUX_PAD(0x0464, 0x019C, 4, 0x0000, 0, 0),
+	MX6_PAD_I2C1_SCL__GPIO3_IO12                          = IOMUX_PAD(0x0464, 0x019C, 5, 0x0000, 0, 0),
+	MX6_PAD_I2C1_SCL__ECSPI1_SS1                          = IOMUX_PAD(0x0464, 0x019C, 6, 0x060C, 0, 0),
+
+	MX6_PAD_I2C1_SDA__I2C1_SDA                            = IOMUX_PAD(0x0468, 0x01A0, IOMUX_CONFIG_SION | 0, 0x0680, 0, 0),
+	MX6_PAD_I2C1_SDA__UART1_DCE_CTS                       = IOMUX_PAD(0x0468, 0x01A0, 1, 0x0000, 0, 0),
+	MX6_PAD_I2C1_SDA__UART1_DTE_RTS                       = IOMUX_PAD(0x0468, 0x01A0, 1, 0x0740, 1, 0),
+	MX6_PAD_I2C1_SDA__ECSPI3_SS3                          = IOMUX_PAD(0x0468, 0x01A0, 2, 0x0644, 0, 0),
+	MX6_PAD_I2C1_SDA__SD3_VSELECT                         = IOMUX_PAD(0x0468, 0x01A0, 4, 0x0000, 0, 0),
+	MX6_PAD_I2C1_SDA__GPIO3_IO13                          = IOMUX_PAD(0x0468, 0x01A0, 5, 0x0000, 0, 0),
+	MX6_PAD_I2C1_SDA__ECSPI1_SS2                          = IOMUX_PAD(0x0468, 0x01A0, 6, 0x0610, 0, 0),
+
+	MX6_PAD_I2C2_SCL__I2C2_SCL                            = IOMUX_PAD(0x046C, 0x01A4, IOMUX_CONFIG_SION | 0, 0x0684, 3, 0),
+	MX6_PAD_I2C2_SCL__AUD4_RXFS                           = IOMUX_PAD(0x046C, 0x01A4, 1, 0x0570, 2, 0),
+	MX6_PAD_I2C2_SCL__SPDIF_IN                            = IOMUX_PAD(0x046C, 0x01A4, 2, 0x0738, 2, 0),
+	MX6_PAD_I2C2_SCL__SD3_WP                              = IOMUX_PAD(0x046C, 0x01A4, 4, 0x0794, 3, 0),
+	MX6_PAD_I2C2_SCL__GPIO3_IO14                          = IOMUX_PAD(0x046C, 0x01A4, 5, 0x0000, 0, 0),
+	MX6_PAD_I2C2_SCL__ECSPI1_RDY                          = IOMUX_PAD(0x046C, 0x01A4, 6, 0x0600, 1, 0),
+
+	MX6_PAD_I2C2_SDA__I2C2_SDA                            = IOMUX_PAD(0x0470, 0x01A8, IOMUX_CONFIG_SION | 0, 0x0688, 3, 0),
+	MX6_PAD_I2C2_SDA__AUD4_RXC                            = IOMUX_PAD(0x0470, 0x01A8, 1, 0x056C, 2, 0),
+	MX6_PAD_I2C2_SDA__SPDIF_OUT                           = IOMUX_PAD(0x0470, 0x01A8, 2, 0x0000, 0, 0),
+	MX6_PAD_I2C2_SDA__SD3_CD_B                            = IOMUX_PAD(0x0470, 0x01A8, 4, 0x0780, 3, 0),
+	MX6_PAD_I2C2_SDA__GPIO3_IO15                          = IOMUX_PAD(0x0470, 0x01A8, 5, 0x0000, 0, 0),
+
+	MX6_PAD_ECSPI1_SCLK__ECSPI1_SCLK                      = IOMUX_PAD(0x0474, 0x01AC, 0, 0x05FC, 1, 0),
+	MX6_PAD_ECSPI1_SCLK__AUD4_TXD                         = IOMUX_PAD(0x0474, 0x01AC, 1, 0x0568, 1, 0),
+	MX6_PAD_ECSPI1_SCLK__UART5_DCE_RX                     = IOMUX_PAD(0x0474, 0x01AC, 2, 0x0764, 2, 0),
+	MX6_PAD_ECSPI1_SCLK__UART5_DTE_TX                     = IOMUX_PAD(0x0474, 0x01AC, 2, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_SCLK__EPDC_VCOM0                       = IOMUX_PAD(0x0474, 0x01AC, 3, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_SCLK__SD2_RESET                        = IOMUX_PAD(0x0474, 0x01AC, 4, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_SCLK__GPIO4_IO08                       = IOMUX_PAD(0x0474, 0x01AC, 5, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_SCLK__USB_OTG2_OC                      = IOMUX_PAD(0x0474, 0x01AC, 6, 0x0768, 1, 0),
+
+	MX6_PAD_ECSPI1_MOSI__ECSPI1_MOSI                      = IOMUX_PAD(0x0478, 0x01B0, 0, 0x0608, 1, 0),
+	MX6_PAD_ECSPI1_MOSI__AUD4_TXC                         = IOMUX_PAD(0x0478, 0x01B0, 1, 0x0574, 1, 0),
+	MX6_PAD_ECSPI1_MOSI__UART5_DCE_TX                     = IOMUX_PAD(0x0478, 0x01B0, 2, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_MOSI__UART5_DTE_RX                     = IOMUX_PAD(0x0478, 0x01B0, 2, 0x0764, 3, 0),
+	MX6_PAD_ECSPI1_MOSI__EPDC_VCOM1                       = IOMUX_PAD(0x0478, 0x01B0, 3, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_MOSI__SD2_VSELECT                      = IOMUX_PAD(0x0478, 0x01B0, 4, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_MOSI__GPIO4_IO09                       = IOMUX_PAD(0x0478, 0x01B0, 5, 0x0000, 0, 0),
+
+	MX6_PAD_ECSPI1_MISO__ECSPI1_MISO                      = IOMUX_PAD(0x047C, 0x01B4, 0, 0x0604, 1, 0),
+	MX6_PAD_ECSPI1_MISO__AUD4_TXFS                        = IOMUX_PAD(0x047C, 0x01B4, 1, 0x0578, 1, 0),
+	MX6_PAD_ECSPI1_MISO__UART5_DCE_RTS                    = IOMUX_PAD(0x047C, 0x01B4, 2, 0x0760, 2, 0),
+	MX6_PAD_ECSPI1_MISO__UART5_DTE_CTS                    = IOMUX_PAD(0x047C, 0x01B4, 2, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_MISO__EPDC_BDR0                        = IOMUX_PAD(0x047C, 0x01B4, 3, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_MISO__SD2_WP                           = IOMUX_PAD(0x047C, 0x01B4, 4, 0x077C, 0, 0),
+	MX6_PAD_ECSPI1_MISO__GPIO4_IO10                       = IOMUX_PAD(0x047C, 0x01B4, 5, 0x0000, 0, 0),
+
+	MX6_PAD_ECSPI1_SS0__ECSPI1_SS0                        = IOMUX_PAD(0x0480, 0x01B8, 0, 0x0614, 1, 0),
+	MX6_PAD_ECSPI1_SS0__AUD4_RXD                          = IOMUX_PAD(0x0480, 0x01B8, 1, 0x0564, 1, 0),
+	MX6_PAD_ECSPI1_SS0__UART5_DCE_CTS                     = IOMUX_PAD(0x0480, 0x01B8, 2, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_SS0__UART5_DTE_RTS                     = IOMUX_PAD(0x0480, 0x01B8, 2, 0x0760, 3, 0),
+	MX6_PAD_ECSPI1_SS0__EPDC_BDR1                         = IOMUX_PAD(0x0480, 0x01B8, 3, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_SS0__SD2_CD_B                          = IOMUX_PAD(0x0480, 0x01B8, 4, 0x0778, 0, 0),
+	MX6_PAD_ECSPI1_SS0__GPIO4_IO11                        = IOMUX_PAD(0x0480, 0x01B8, 5, 0x0000, 0, 0),
+	MX6_PAD_ECSPI1_SS0__USB_OTG2_PWR                      = IOMUX_PAD(0x0480, 0x01B8, 6, 0x0000, 0, 0),
+
+	MX6_PAD_ECSPI2_SCLK__ECSPI2_SCLK                      = IOMUX_PAD(0x0484, 0x01BC, 0, 0x061C, 1, 0),
+	MX6_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                    = IOMUX_PAD(0x0484, 0x01BC, 1, 0x073C, 2, 0),
+	MX6_PAD_ECSPI2_SCLK__UART3_DCE_RX                     = IOMUX_PAD(0x0484, 0x01BC, 2, 0x0754, 2, 0),
+	MX6_PAD_ECSPI2_SCLK__UART3_DTE_TX                     = IOMUX_PAD(0x0484, 0x01BC, 2, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_SCLK__CSI_PIXCLK                       = IOMUX_PAD(0x0484, 0x01BC, 3, 0x05F4, 1, 0),
+	MX6_PAD_ECSPI2_SCLK__SD1_RESET                        = IOMUX_PAD(0x0484, 0x01BC, 4, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_SCLK__GPIO4_IO12                       = IOMUX_PAD(0x0484, 0x01BC, 5, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_SCLK__USB_OTG2_OC                      = IOMUX_PAD(0x0484, 0x01BC, 6, 0x0768, 2, 0),
+
+	MX6_PAD_ECSPI2_MOSI__ECSPI2_MOSI                      = IOMUX_PAD(0x0488, 0x01C0, 0, 0x0624, 1, 0),
+	MX6_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                  = IOMUX_PAD(0x0488, 0x01C0, 1, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_MOSI__UART3_DCE_TX                     = IOMUX_PAD(0x0488, 0x01C0, 2, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_MOSI__UART3_DTE_RX                     = IOMUX_PAD(0x0488, 0x01C0, 2, 0x0754, 3, 0),
+	MX6_PAD_ECSPI2_MOSI__CSI_HSYNC                        = IOMUX_PAD(0x0488, 0x01C0, 3, 0x05F0, 1, 0),
+	MX6_PAD_ECSPI2_MOSI__SD1_VSELECT                      = IOMUX_PAD(0x0488, 0x01C0, 4, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_MOSI__GPIO4_IO13                       = IOMUX_PAD(0x0488, 0x01C0, 5, 0x0000, 0, 0),
+
+	MX6_PAD_ECSPI2_MISO__ECSPI2_MISO                      = IOMUX_PAD(0x048C, 0x01C4, 0, 0x0620, 1, 0),
+	MX6_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                  = IOMUX_PAD(0x048C, 0x01C4, 1, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_MISO__UART3_DCE_RTS                    = IOMUX_PAD(0x048C, 0x01C4, 2, 0x0750, 0, 0),
+	MX6_PAD_ECSPI2_MISO__UART3_DTE_CTS                    = IOMUX_PAD(0x048C, 0x01C4, 2, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_MISO__CSI_MCLK                         = IOMUX_PAD(0x048C, 0x01C4, 3, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_MISO__SD1_WP                           = IOMUX_PAD(0x048C, 0x01C4, 4, 0x0774, 2, 0),
+	MX6_PAD_ECSPI2_MISO__GPIO4_IO14                       = IOMUX_PAD(0x048C, 0x01C4, 5, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_MISO__USB_OTG1_OC                      = IOMUX_PAD(0x048C, 0x01C4, 6, 0x076C, 1, 0),
+
+	MX6_PAD_ECSPI2_SS0__ECSPI2_SS0                        = IOMUX_PAD(0x0490, 0x01C8, 0, 0x0628, 0, 0),
+	MX6_PAD_ECSPI2_SS0__ECSPI1_SS3                        = IOMUX_PAD(0x0490, 0x01C8, 1, 0x0618, 1, 0),
+	MX6_PAD_ECSPI2_SS0__UART3_DCE_CTS                     = IOMUX_PAD(0x0490, 0x01C8, 2, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_SS0__UART3_DTE_RTS                     = IOMUX_PAD(0x0490, 0x01C8, 2, 0x0750, 1, 0),
+	MX6_PAD_ECSPI2_SS0__CSI_VSYNC                         = IOMUX_PAD(0x0490, 0x01C8, 3, 0x05F8, 1, 0),
+	MX6_PAD_ECSPI2_SS0__SD1_CD_B                          = IOMUX_PAD(0x0490, 0x01C8, 4, 0x0770, 2, 0),
+	MX6_PAD_ECSPI2_SS0__GPIO4_IO15                        = IOMUX_PAD(0x0490, 0x01C8, 5, 0x0000, 0, 0),
+	MX6_PAD_ECSPI2_SS0__USB_OTG1_PWR                      = IOMUX_PAD(0x0490, 0x01C8, 6, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_CLK__SD1_CLK                              = IOMUX_PAD(0x0494, 0x01CC, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__KEY_COL0                             = IOMUX_PAD(0x0494, 0x01CC, 2, 0x06A0, 2, 0),
+	MX6_PAD_SD1_CLK__EPDC_SDCE4                           = IOMUX_PAD(0x0494, 0x01CC, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__GPIO5_IO15                           = IOMUX_PAD(0x0494, 0x01CC, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_CMD__SD1_CMD                              = IOMUX_PAD(0x0498, 0x01D0, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__KEY_ROW0                             = IOMUX_PAD(0x0498, 0x01D0, 2, 0x06C0, 2, 0),
+	MX6_PAD_SD1_CMD__EPDC_SDCE5                           = IOMUX_PAD(0x0498, 0x01D0, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__GPIO5_IO14                           = IOMUX_PAD(0x0498, 0x01D0, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA0__SD1_DATA0                          = IOMUX_PAD(0x049C, 0x01D4, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__KEY_COL1                           = IOMUX_PAD(0x049C, 0x01D4, 2, 0x06A4, 2, 0),
+	MX6_PAD_SD1_DATA0__EPDC_SDCE6                         = IOMUX_PAD(0x049C, 0x01D4, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__GPIO5_IO11                         = IOMUX_PAD(0x049C, 0x01D4, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA1__SD1_DATA1                          = IOMUX_PAD(0x04A0, 0x01D8, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA1__KEY_ROW1                           = IOMUX_PAD(0x04A0, 0x01D8, 2, 0x06C4, 2, 0),
+	MX6_PAD_SD1_DATA1__EPDC_SDCE7                         = IOMUX_PAD(0x04A0, 0x01D8, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA1__GPIO5_IO08                         = IOMUX_PAD(0x04A0, 0x01D8, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA2__SD1_DATA2                          = IOMUX_PAD(0x04A4, 0x01DC, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__KEY_COL2                           = IOMUX_PAD(0x04A4, 0x01DC, 2, 0x06A8, 2, 0),
+	MX6_PAD_SD1_DATA2__EPDC_SDCE8                         = IOMUX_PAD(0x04A4, 0x01DC, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__GPIO5_IO13                         = IOMUX_PAD(0x04A4, 0x01DC, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA3__SD1_DATA3                          = IOMUX_PAD(0x04A8, 0x01E0, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__KEY_ROW2                           = IOMUX_PAD(0x04A8, 0x01E0, 2, 0x06C8, 2, 0),
+	MX6_PAD_SD1_DATA3__EPDC_SDCE9                         = IOMUX_PAD(0x04A8, 0x01E0, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__GPIO5_IO06                         = IOMUX_PAD(0x04A8, 0x01E0, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA4__SD1_DATA4                          = IOMUX_PAD(0x04AC, 0x01E4, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA4__KEY_COL3                           = IOMUX_PAD(0x04AC, 0x01E4, 2, 0x06AC, 2, 0),
+	MX6_PAD_SD1_DATA4__EPDC_SDCLK_N                       = IOMUX_PAD(0x04AC, 0x01E4, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA4__UART4_DCE_RX                       = IOMUX_PAD(0x04AC, 0x01E4, 4, 0x075C, 6, 0),
+	MX6_PAD_SD1_DATA4__UART4_DTE_TX                       = IOMUX_PAD(0x04AC, 0x01E4, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA4__GPIO5_IO12                         = IOMUX_PAD(0x04AC, 0x01E4, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA5__SD1_DATA5                          = IOMUX_PAD(0x04B0, 0x01E8, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA5__KEY_ROW3                           = IOMUX_PAD(0x04B0, 0x01E8, 2, 0x06CC, 2, 0),
+	MX6_PAD_SD1_DATA5__EPDC_SDOED                         = IOMUX_PAD(0x04B0, 0x01E8, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA5__UART4_DCE_TX                       = IOMUX_PAD(0x04B0, 0x01E8, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA5__UART4_DTE_RX                       = IOMUX_PAD(0x04B0, 0x01E8, 4, 0x075C, 7, 0),
+	MX6_PAD_SD1_DATA5__GPIO5_IO09                         = IOMUX_PAD(0x04B0, 0x01E8, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA6__SD1_DATA6                          = IOMUX_PAD(0x04B4, 0x01EC, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA6__KEY_COL4                           = IOMUX_PAD(0x04B4, 0x01EC, 2, 0x06B0, 2, 0),
+	MX6_PAD_SD1_DATA6__EPDC_SDOEZ                         = IOMUX_PAD(0x04B4, 0x01EC, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA6__UART4_DCE_RTS                      = IOMUX_PAD(0x04B4, 0x01EC, 4, 0x0758, 4, 0),
+	MX6_PAD_SD1_DATA6__UART4_DTE_CTS                      = IOMUX_PAD(0x04B4, 0x01EC, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA6__GPIO5_IO07                         = IOMUX_PAD(0x04B4, 0x01EC, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA7__SD1_DATA7                          = IOMUX_PAD(0x04B8, 0x01F0, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA7__KEY_ROW4                           = IOMUX_PAD(0x04B8, 0x01F0, 2, 0x06D0, 2, 0),
+	MX6_PAD_SD1_DATA7__CCM_PMIC_READY                     = IOMUX_PAD(0x04B8, 0x01F0, 3, 0x05AC, 3, 0),
+	MX6_PAD_SD1_DATA7__UART4_DCE_CTS                      = IOMUX_PAD(0x04B8, 0x01F0, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA7__UART4_DTE_RTS                      = IOMUX_PAD(0x04B8, 0x01F0, 4, 0x0758, 5, 0),
+	MX6_PAD_SD1_DATA7__GPIO5_IO10                         = IOMUX_PAD(0x04B8, 0x01F0, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_RESET__SD2_RESET                          = IOMUX_PAD(0x04BC, 0x01F4, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_RESET__WDOG2_B                            = IOMUX_PAD(0x04BC, 0x01F4, 2, 0x0000, 0, 0),
+	MX6_PAD_SD2_RESET__SPDIF_OUT                          = IOMUX_PAD(0x04BC, 0x01F4, 3, 0x0000, 0, 0),
+	MX6_PAD_SD2_RESET__CSI_MCLK                           = IOMUX_PAD(0x04BC, 0x01F4, 4, 0x0000, 0, 0),
+	MX6_PAD_SD2_RESET__GPIO4_IO27                         = IOMUX_PAD(0x04BC, 0x01F4, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_CLK__SD2_CLK                              = IOMUX_PAD(0x04C0, 0x01F8, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_CLK__AUD4_RXFS                            = IOMUX_PAD(0x04C0, 0x01F8, 1, 0x0570, 1, 0),
+	MX6_PAD_SD2_CLK__ECSPI3_SCLK                          = IOMUX_PAD(0x04C0, 0x01F8, 2, 0x0630, 1, 0),
+	MX6_PAD_SD2_CLK__CSI_DATA00                           = IOMUX_PAD(0x04C0, 0x01F8, 3, 0x05C8, 1, 0),
+	MX6_PAD_SD2_CLK__GPIO5_IO05                           = IOMUX_PAD(0x04C0, 0x01F8, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_CMD__SD2_CMD                              = IOMUX_PAD(0x04C4, 0x01FC, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_CMD__AUD4_RXC                             = IOMUX_PAD(0x04C4, 0x01FC, 1, 0x056C, 1, 0),
+	MX6_PAD_SD2_CMD__ECSPI3_SS0                           = IOMUX_PAD(0x04C4, 0x01FC, 2, 0x0648, 1, 0),
+	MX6_PAD_SD2_CMD__CSI_DATA01                           = IOMUX_PAD(0x04C4, 0x01FC, 3, 0x05CC, 1, 0),
+	MX6_PAD_SD2_CMD__EPIT1_OUT                            = IOMUX_PAD(0x04C4, 0x01FC, 4, 0x0000, 0, 0),
+	MX6_PAD_SD2_CMD__GPIO5_IO04                           = IOMUX_PAD(0x04C4, 0x01FC, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_DATA0__SD2_DATA0                          = IOMUX_PAD(0x04C8, 0x0200, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA0__AUD4_RXD                           = IOMUX_PAD(0x04C8, 0x0200, 1, 0x0564, 2, 0),
+	MX6_PAD_SD2_DATA0__ECSPI3_MOSI                        = IOMUX_PAD(0x04C8, 0x0200, 2, 0x063C, 1, 0),
+	MX6_PAD_SD2_DATA0__CSI_DATA02                         = IOMUX_PAD(0x04C8, 0x0200, 3, 0x05D0, 1, 0),
+	MX6_PAD_SD2_DATA0__UART5_DCE_RTS                      = IOMUX_PAD(0x04C8, 0x0200, 4, 0x0760, 4, 0),
+	MX6_PAD_SD2_DATA0__UART5_DTE_CTS                      = IOMUX_PAD(0x04C8, 0x0200, 4, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA0__GPIO5_IO01                         = IOMUX_PAD(0x04C8, 0x0200, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_DATA1__SD2_DATA1                          = IOMUX_PAD(0x04CC, 0x0204, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA1__AUD4_TXC                           = IOMUX_PAD(0x04CC, 0x0204, 1, 0x0574, 2, 0),
+	MX6_PAD_SD2_DATA1__ECSPI3_MISO                        = IOMUX_PAD(0x04CC, 0x0204, 2, 0x0638, 1, 0),
+	MX6_PAD_SD2_DATA1__CSI_DATA03                         = IOMUX_PAD(0x04CC, 0x0204, 3, 0x05D4, 1, 0),
+	MX6_PAD_SD2_DATA1__UART5_DCE_CTS                      = IOMUX_PAD(0x04CC, 0x0204, 4, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA1__UART5_DTE_RTS                      = IOMUX_PAD(0x04CC, 0x0204, 4, 0x0760, 5, 0),
+	MX6_PAD_SD2_DATA1__GPIO4_IO30                         = IOMUX_PAD(0x04CC, 0x0204, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_DATA2__SD2_DATA2                          = IOMUX_PAD(0x04D0, 0x0208, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA2__AUD4_TXFS                          = IOMUX_PAD(0x04D0, 0x0208, 1, 0x0578, 2, 0),
+	MX6_PAD_SD2_DATA2__CSI_DATA04                         = IOMUX_PAD(0x04D0, 0x0208, 3, 0x05D8, 1, 0),
+	MX6_PAD_SD2_DATA2__UART5_DCE_RX                       = IOMUX_PAD(0x04D0, 0x0208, 4, 0x0764, 4, 0),
+	MX6_PAD_SD2_DATA2__UART5_DTE_TX                       = IOMUX_PAD(0x04D0, 0x0208, 4, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA2__GPIO5_IO03                         = IOMUX_PAD(0x04D0, 0x0208, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_DATA3__SD2_DATA3                          = IOMUX_PAD(0x04D4, 0x020C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA3__AUD4_TXD                           = IOMUX_PAD(0x04D4, 0x020C, 1, 0x0568, 2, 0),
+	MX6_PAD_SD2_DATA3__CSI_DATA05                         = IOMUX_PAD(0x04D4, 0x020C, 3, 0x05DC, 1, 0),
+	MX6_PAD_SD2_DATA3__UART5_DCE_TX                       = IOMUX_PAD(0x04D4, 0x020C, 4, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA3__UART5_DTE_RX                       = IOMUX_PAD(0x04D4, 0x020C, 4, 0x0764, 5, 0),
+	MX6_PAD_SD2_DATA3__GPIO4_IO28                         = IOMUX_PAD(0x04D4, 0x020C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_DATA4__SD2_DATA4                          = IOMUX_PAD(0x04D8, 0x0210, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA4__SD3_DATA4                          = IOMUX_PAD(0x04D8, 0x0210, 1, 0x0784, 1, 0),
+	MX6_PAD_SD2_DATA4__UART2_DCE_RX                       = IOMUX_PAD(0x04D8, 0x0210, 2, 0x074C, 2, 0),
+	MX6_PAD_SD2_DATA4__UART2_DTE_TX                       = IOMUX_PAD(0x04D8, 0x0210, 2, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA4__CSI_DATA06                         = IOMUX_PAD(0x04D8, 0x0210, 3, 0x05E0, 1, 0),
+	MX6_PAD_SD2_DATA4__SPDIF_OUT                          = IOMUX_PAD(0x04D8, 0x0210, 4, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA4__GPIO5_IO02                         = IOMUX_PAD(0x04D8, 0x0210, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_DATA5__SD2_DATA5                          = IOMUX_PAD(0x04DC, 0x0214, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA5__SD3_DATA5                          = IOMUX_PAD(0x04DC, 0x0214, 1, 0x0788, 1, 0),
+	MX6_PAD_SD2_DATA5__UART2_DCE_TX                       = IOMUX_PAD(0x04DC, 0x0214, 2, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA5__UART2_DTE_RX                       = IOMUX_PAD(0x04DC, 0x0214, 2, 0x074C, 3, 0),
+	MX6_PAD_SD2_DATA5__CSI_DATA07                         = IOMUX_PAD(0x04DC, 0x0214, 3, 0x05E4, 1, 0),
+	MX6_PAD_SD2_DATA5__SPDIF_IN                           = IOMUX_PAD(0x04DC, 0x0214, 4, 0x0738, 1, 0),
+	MX6_PAD_SD2_DATA5__GPIO4_IO31                         = IOMUX_PAD(0x04DC, 0x0214, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_DATA6__SD2_DATA6                          = IOMUX_PAD(0x04E0, 0x0218, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA6__SD3_DATA6                          = IOMUX_PAD(0x04E0, 0x0218, 1, 0x078C, 1, 0),
+	MX6_PAD_SD2_DATA6__UART2_DCE_RTS                      = IOMUX_PAD(0x04E0, 0x0218, 2, 0x0748, 2, 0),
+	MX6_PAD_SD2_DATA6__UART2_DTE_CTS                      = IOMUX_PAD(0x04E0, 0x0218, 2, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA6__CSI_DATA08                         = IOMUX_PAD(0x04E0, 0x0218, 3, 0x05E8, 1, 0),
+	MX6_PAD_SD2_DATA6__SD2_WP                             = IOMUX_PAD(0x04E0, 0x0218, 4, 0x077C, 1, 0),
+	MX6_PAD_SD2_DATA6__GPIO4_IO29                         = IOMUX_PAD(0x04E0, 0x0218, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD2_DATA7__SD2_DATA7                          = IOMUX_PAD(0x04E4, 0x021C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA7__SD3_DATA7                          = IOMUX_PAD(0x04E4, 0x021C, 1, 0x0790, 1, 0),
+	MX6_PAD_SD2_DATA7__UART2_DCE_CTS                      = IOMUX_PAD(0x04E4, 0x021C, 2, 0x0000, 0, 0),
+	MX6_PAD_SD2_DATA7__UART2_DTE_RTS                      = IOMUX_PAD(0x04E4, 0x021C, 2, 0x0748, 3, 0),
+	MX6_PAD_SD2_DATA7__CSI_DATA09                         = IOMUX_PAD(0x04E4, 0x021C, 3, 0x05EC, 1, 0),
+	MX6_PAD_SD2_DATA7__SD2_CD_B                           = IOMUX_PAD(0x04E4, 0x021C, 4, 0x0778, 1, 0),
+	MX6_PAD_SD2_DATA7__GPIO5_IO00                         = IOMUX_PAD(0x04E4, 0x021C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD3_CLK__SD3_CLK                              = IOMUX_PAD(0x04E8, 0x0220, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_CLK__AUD5_RXFS                            = IOMUX_PAD(0x04E8, 0x0220, 1, 0x0588, 0, 0),
+	MX6_PAD_SD3_CLK__KEY_COL5                             = IOMUX_PAD(0x04E8, 0x0220, 2, 0x0694, 0, 0),
+	MX6_PAD_SD3_CLK__CSI_DATA10                           = IOMUX_PAD(0x04E8, 0x0220, 3, 0x05B0, 0, 0),
+	MX6_PAD_SD3_CLK__WDOG1_RESET_B_DEB                    = IOMUX_PAD(0x04E8, 0x0220, 4, 0x0000, 0, 0),
+	MX6_PAD_SD3_CLK__GPIO5_IO18                           = IOMUX_PAD(0x04E8, 0x0220, 5, 0x0000, 0, 0),
+	MX6_PAD_SD3_CLK__USB_OTG1_PWR                         = IOMUX_PAD(0x04E8, 0x0220, 6, 0x0000, 0, 0),
+
+	MX6_PAD_SD3_CMD__SD3_CMD                              = IOMUX_PAD(0x04EC, 0x0224, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_CMD__AUD5_RXC                             = IOMUX_PAD(0x04EC, 0x0224, 1, 0x0584, 0, 0),
+	MX6_PAD_SD3_CMD__KEY_ROW5                             = IOMUX_PAD(0x04EC, 0x0224, 2, 0x06B4, 0, 0),
+	MX6_PAD_SD3_CMD__CSI_DATA11                           = IOMUX_PAD(0x04EC, 0x0224, 3, 0x05B4, 0, 0),
+	MX6_PAD_SD3_CMD__USB_OTG2_ID                          = IOMUX_PAD(0x04EC, 0x0224, 4, 0x0560, 1, 0),
+	MX6_PAD_SD3_CMD__GPIO5_IO21                           = IOMUX_PAD(0x04EC, 0x0224, 5, 0x0000, 0, 0),
+	MX6_PAD_SD3_CMD__USB_OTG2_PWR                         = IOMUX_PAD(0x04EC, 0x0224, 6, 0x0000, 0, 0),
+
+	MX6_PAD_SD3_DATA0__SD3_DATA0                          = IOMUX_PAD(0x04F0, 0x0228, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA0__AUD5_RXD                           = IOMUX_PAD(0x04F0, 0x0228, 1, 0x057C, 0, 0),
+	MX6_PAD_SD3_DATA0__KEY_COL6                           = IOMUX_PAD(0x04F0, 0x0228, 2, 0x0698, 0, 0),
+	MX6_PAD_SD3_DATA0__CSI_DATA12                         = IOMUX_PAD(0x04F0, 0x0228, 3, 0x05B8, 0, 0),
+	MX6_PAD_SD3_DATA0__USB_OTG1_ID                        = IOMUX_PAD(0x04F0, 0x0228, 4, 0x055C, 1, 0),
+	MX6_PAD_SD3_DATA0__GPIO5_IO19                         = IOMUX_PAD(0x04F0, 0x0228, 5, 0x0000, 0, 0),
+
+	MX6_PAD_SD3_DATA1__SD3_DATA1                          = IOMUX_PAD(0x04F4, 0x022C, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA1__AUD5_TXC                           = IOMUX_PAD(0x04F4, 0x022C, 1, 0x058C, 0, 0),
+	MX6_PAD_SD3_DATA1__KEY_ROW6                           = IOMUX_PAD(0x04F4, 0x022C, 2, 0x06B8, 0, 0),
+	MX6_PAD_SD3_DATA1__CSI_DATA13                         = IOMUX_PAD(0x04F4, 0x022C, 3, 0x05BC, 0, 0),
+	MX6_PAD_SD3_DATA1__SD1_VSELECT                        = IOMUX_PAD(0x04F4, 0x022C, 4, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA1__GPIO5_IO20                         = IOMUX_PAD(0x04F4, 0x022C, 5, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA1__JTAG_DE_B                          = IOMUX_PAD(0x04F4, 0x022C, 6, 0x0000, 0, 0),
+
+	MX6_PAD_SD3_DATA2__SD3_DATA2                          = IOMUX_PAD(0x04F8, 0x0230, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA2__AUD5_TXFS                          = IOMUX_PAD(0x04F8, 0x0230, 1, 0x0590, 0, 0),
+	MX6_PAD_SD3_DATA2__KEY_COL7                           = IOMUX_PAD(0x04F8, 0x0230, 2, 0x069C, 0, 0),
+	MX6_PAD_SD3_DATA2__CSI_DATA14                         = IOMUX_PAD(0x04F8, 0x0230, 3, 0x05C0, 0, 0),
+	MX6_PAD_SD3_DATA2__EPIT1_OUT                          = IOMUX_PAD(0x04F8, 0x0230, 4, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA2__GPIO5_IO16                         = IOMUX_PAD(0x04F8, 0x0230, 5, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA2__USB_OTG2_OC                        = IOMUX_PAD(0x04F8, 0x0230, 6, 0x0768, 0, 0),
+
+	MX6_PAD_SD3_DATA3__SD3_DATA3                          = IOMUX_PAD(0x04FC, 0x0234, 0, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA3__AUD5_TXD                           = IOMUX_PAD(0x04FC, 0x0234, 1, 0x0580, 0, 0),
+	MX6_PAD_SD3_DATA3__KEY_ROW7                           = IOMUX_PAD(0x04FC, 0x0234, 2, 0x06BC, 0, 0),
+	MX6_PAD_SD3_DATA3__CSI_DATA15                         = IOMUX_PAD(0x04FC, 0x0234, 3, 0x05C4, 0, 0),
+	MX6_PAD_SD3_DATA3__EPIT2_OUT                          = IOMUX_PAD(0x04FC, 0x0234, 4, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA3__GPIO5_IO17                         = IOMUX_PAD(0x04FC, 0x0234, 5, 0x0000, 0, 0),
+	MX6_PAD_SD3_DATA3__USB_OTG1_OC                        = IOMUX_PAD(0x04FC, 0x0234, 6, 0x076C, 0, 0),
+
+	MX6_PAD_GPIO4_IO20__SD1_STROBE                        = IOMUX_PAD(0x0500, 0x0238, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO20__AUD6_RXFS                         = IOMUX_PAD(0x0500, 0x0238, 2, 0x05A0, 0, 0),
+	MX6_PAD_GPIO4_IO20__ECSPI4_SS0                        = IOMUX_PAD(0x0500, 0x0238, 3, 0x065C, 0, 0),
+	MX6_PAD_GPIO4_IO20__GPT_CAPTURE1                      = IOMUX_PAD(0x0500, 0x0238, 4, 0x0670, 0, 0),
+	MX6_PAD_GPIO4_IO20__GPIO4_IO20                        = IOMUX_PAD(0x0500, 0x0238, 5, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO4_IO21__SD2_STROBE                        = IOMUX_PAD(0x0504, 0x023C, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO21__AUD6_RXC                          = IOMUX_PAD(0x0504, 0x023C, 2, 0x059C, 0, 0),
+	MX6_PAD_GPIO4_IO21__ECSPI4_SCLK                       = IOMUX_PAD(0x0504, 0x023C, 3, 0x0650, 0, 0),
+	MX6_PAD_GPIO4_IO21__GPT_CAPTURE2                      = IOMUX_PAD(0x0504, 0x023C, 4, 0x0674, 0, 0),
+	MX6_PAD_GPIO4_IO21__GPIO4_IO21                        = IOMUX_PAD(0x0504, 0x023C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO4_IO19__SD3_STROBE                        = IOMUX_PAD(0x0508, 0x0240, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO19__AUD6_RXD                          = IOMUX_PAD(0x0508, 0x0240, 2, 0x0594, 0, 0),
+	MX6_PAD_GPIO4_IO19__ECSPI4_MOSI                       = IOMUX_PAD(0x0508, 0x0240, 3, 0x0658, 0, 0),
+	MX6_PAD_GPIO4_IO19__GPT_COMPARE1                      = IOMUX_PAD(0x0508, 0x0240, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO19__GPIO4_IO19                        = IOMUX_PAD(0x0508, 0x0240, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO25__AUD6_TXC                          = IOMUX_PAD(0x050C, 0x0244, 2, 0x05A4, 0, 0),
+	MX6_PAD_GPIO4_IO25__ECSPI4_MISO                       = IOMUX_PAD(0x050C, 0x0244, 3, 0x0654, 0, 0),
+	MX6_PAD_GPIO4_IO25__GPT_COMPARE2                      = IOMUX_PAD(0x050C, 0x0244, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO25__GPIO4_IO25                        = IOMUX_PAD(0x050C, 0x0244, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO18__AUD6_TXFS                         = IOMUX_PAD(0x0510, 0x0248, 2, 0x05A8, 0, 0),
+	MX6_PAD_GPIO4_IO18__ECSPI4_SS1                        = IOMUX_PAD(0x0510, 0x0248, 3, 0x0660, 0, 0),
+	MX6_PAD_GPIO4_IO18__GPT_COMPARE3                      = IOMUX_PAD(0x0510, 0x0248, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO18__GPIO4_IO18                        = IOMUX_PAD(0x0510, 0x0248, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO24__AUD6_TXD                          = IOMUX_PAD(0x0514, 0x024C, 2, 0x0598, 0, 0),
+	MX6_PAD_GPIO4_IO24__ECSPI4_SS2                        = IOMUX_PAD(0x0514, 0x024C, 3, 0x0664, 0, 0),
+	MX6_PAD_GPIO4_IO24__GPT_CLKIN                         = IOMUX_PAD(0x0514, 0x024C, 4, 0x0678, 0, 0),
+	MX6_PAD_GPIO4_IO24__GPIO4_IO24                        = IOMUX_PAD(0x0514, 0x024C, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO23__AUDIO_CLK_OUT                     = IOMUX_PAD(0x0518, 0x0250, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO23__SD1_RESET                         = IOMUX_PAD(0x0518, 0x0250, 3, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO23__SD3_RESET                         = IOMUX_PAD(0x0518, 0x0250, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO23__GPIO4_IO23                        = IOMUX_PAD(0x0518, 0x0250, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO17__USB_OTG1_ID                       = IOMUX_PAD(0x051C, 0x0254, 2, 0x055C, 2, 0),
+	MX6_PAD_GPIO4_IO17__SD1_VSELECT                       = IOMUX_PAD(0x051C, 0x0254, 3, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO17__SD3_VSELECT                       = IOMUX_PAD(0x051C, 0x0254, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO17__GPIO4_IO17                        = IOMUX_PAD(0x051C, 0x0254, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO22__SPDIF_IN                          = IOMUX_PAD(0x0520, 0x0258, 2, 0x0738, 0, 0),
+	MX6_PAD_GPIO4_IO22__SD1_WP                            = IOMUX_PAD(0x0520, 0x0258, 3, 0x0774, 0, 0),
+	MX6_PAD_GPIO4_IO22__SD3_WP                            = IOMUX_PAD(0x0520, 0x0258, 4, 0x0794, 1, 0),
+	MX6_PAD_GPIO4_IO22__GPIO4_IO22                        = IOMUX_PAD(0x0520, 0x0258, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO16__SPDIF_OUT                         = IOMUX_PAD(0x0524, 0x025C, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO16__SD1_CD_B                          = IOMUX_PAD(0x0524, 0x025C, 3, 0x0770, 0, 0),
+	MX6_PAD_GPIO4_IO16__SD3_CD_B                          = IOMUX_PAD(0x0524, 0x025C, 4, 0x0780, 1, 0),
+	MX6_PAD_GPIO4_IO16__GPIO4_IO16                        = IOMUX_PAD(0x0524, 0x025C, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO26__WDOG1_B                           = IOMUX_PAD(0x0528, 0x0260, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO26__PWM4_OUT                          = IOMUX_PAD(0x0528, 0x0260, 3, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO26__CCM_PMIC_READY                    = IOMUX_PAD(0x0528, 0x0260, 4, 0x05AC, 1, 0),
+	MX6_PAD_GPIO4_IO26__GPIO4_IO26                        = IOMUX_PAD(0x0528, 0x0260, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO4_IO26__SPDIF_EXT_CLK                     = IOMUX_PAD(0x0528, 0x0260, 6, 0x073C, 0, 0),
+};
+#endif  /* __ASM_ARCH_IMX6SLL_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h
new file mode 100644
index 000000000..5ad93ede3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_MX6SX_DDR_H__
+#define __ASM_ARCH_MX6SX_DDR_H__
+
+#ifndef CONFIG_MX6SX
+#error "wrong CPU"
+#endif
+
+#define MX6_IOM_DRAM_DQM0	0x020e02ec
+#define MX6_IOM_DRAM_DQM1	0x020e02f0
+#define MX6_IOM_DRAM_DQM2	0x020e02f4
+#define MX6_IOM_DRAM_DQM3	0x020e02f8
+
+#define MX6_IOM_DRAM_RAS	0x020e02fc
+#define MX6_IOM_DRAM_CAS	0x020e0300
+#define MX6_IOM_DRAM_SDODT0	0x020e0310
+#define MX6_IOM_DRAM_SDODT1	0x020e0314
+#define MX6_IOM_DRAM_SDBA2	0x020e0320
+#define MX6_IOM_DRAM_SDCKE0	0x020e0324
+#define MX6_IOM_DRAM_SDCKE1	0x020e0328
+#define MX6_IOM_DRAM_SDCLK_0	0x020e032c
+#define MX6_IOM_DRAM_RESET	0x020e0340
+
+#define MX6_IOM_DRAM_SDQS0	0x020e0330
+#define MX6_IOM_DRAM_SDQS1	0x020e0334
+#define MX6_IOM_DRAM_SDQS2	0x020e0338
+#define MX6_IOM_DRAM_SDQS3	0x020e033c
+
+#define MX6_IOM_GRP_ADDDS	0x020e05f4
+#define MX6_IOM_DDRMODE_CTL	0x020e05f8
+#define MX6_IOM_GRP_DDRPKE	0x020e05fc
+#define MX6_IOM_GRP_DDRMODE	0x020e0608
+#define MX6_IOM_GRP_B0DS	0x020e060c
+#define MX6_IOM_GRP_B1DS	0x020e0610
+#define MX6_IOM_GRP_CTLDS	0x020e0614
+#define MX6_IOM_GRP_DDR_TYPE	0x020e0618
+#define MX6_IOM_GRP_B2DS	0x020e061c
+#define MX6_IOM_GRP_B3DS	0x020e0620
+
+#endif	/*__ASM_ARCH_MX6SX_DDR_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx_pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx_pins.h
new file mode 100644
index 000000000..a18e08f65
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx_pins.h
@@ -0,0 +1,1674 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __ASM_ARCH_MX6_MX6_PINS_H__
+#define __ASM_ARCH_MX6_MX6_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+	 MX6_PAD_GPIO1_IO00__I2C1_SCL                           = IOMUX_PAD(0x035C, 0x0014, IOMUX_CONFIG_SION | 0, 0x07A8, 1, 0),
+	 MX6_PAD_GPIO1_IO00__USDHC1_VSELECT                     = IOMUX_PAD(0x035C, 0x0014, 1, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO00__SPDIF_LOCK                         = IOMUX_PAD(0x035C, 0x0014, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO00__CCM_WAIT                           = IOMUX_PAD(0x035C, 0x0014, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                     = IOMUX_PAD(0x035C, 0x0014, 4, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO00__GPIO1_IO_0                         = IOMUX_PAD(0x035C, 0x0014, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5              = IOMUX_PAD(0x035C, 0x0014, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO00__PHY_DTB_1                          = IOMUX_PAD(0x035C, 0x0014, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO01__I2C1_SDA                           = IOMUX_PAD(0x0360, 0x0018, IOMUX_CONFIG_SION | 0, 0x07AC, 1, 0),
+	 MX6_PAD_GPIO1_IO01__USDHC1_RESET_B                     = IOMUX_PAD(0x0360, 0x0018, 1, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO01__SPDIF_SR_CLK                       = IOMUX_PAD(0x0360, 0x0018, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO01__CCM_STOP                           = IOMUX_PAD(0x0360, 0x0018, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO01__WDOG3_WDOG_B                       = IOMUX_PAD(0x0360, 0x0018, 4, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO01__GPIO1_IO_1                         = IOMUX_PAD(0x0360, 0x0018, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL          = IOMUX_PAD(0x0360, 0x0018, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO01__PHY_DTB_0                          = IOMUX_PAD(0x0360, 0x0018, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO02__I2C2_SCL                           = IOMUX_PAD(0x0364, 0x001C, IOMUX_CONFIG_SION | 0, 0x07B0, 1, 0),
+	 MX6_PAD_GPIO1_IO02__USDHC1_CD_B                        = IOMUX_PAD(0x0364, 0x001C, 1, 0x0864, 1, 0),
+	 MX6_PAD_GPIO1_IO02__CSI2_MCLK                          = IOMUX_PAD(0x0364, 0x001C, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                    = IOMUX_PAD(0x0364, 0x001C, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO02__WDOG1_WDOG_B                       = IOMUX_PAD(0x0364, 0x001C, 4, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO02__GPIO1_IO_2                         = IOMUX_PAD(0x0364, 0x001C, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO02__CCM_REF_EN_B                       = IOMUX_PAD(0x0364, 0x001C, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO02__PHY_TDI                            = IOMUX_PAD(0x0364, 0x001C, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO03__I2C2_SDA                           = IOMUX_PAD(0x0368, 0x0020, IOMUX_CONFIG_SION | 0, 0x07B4, 1, 0),
+	 MX6_PAD_GPIO1_IO03__USDHC1_WP                          = IOMUX_PAD(0x0368, 0x0020, 1, 0x0868, 1, 0),
+	 MX6_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                  = IOMUX_PAD(0x0368, 0x0020, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                    = IOMUX_PAD(0x0368, 0x0020, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO03__WDOG2_WDOG_B                       = IOMUX_PAD(0x0368, 0x0020, 4, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO03__GPIO1_IO_3                         = IOMUX_PAD(0x0368, 0x0020, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO03__CCM_PLL3_BYP                       = IOMUX_PAD(0x0368, 0x0020, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO03__PHY_TCK                            = IOMUX_PAD(0x0368, 0x0020, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO04__UART1_TX                           = IOMUX_PAD(0x036C, 0x0024, 0, 0x0830, 0, 0),
+	 MX6_PAD_GPIO1_IO04__USDHC2_RESET_B                     = IOMUX_PAD(0x036C, 0x0024, 1, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO04__ENET1_MDC                          = IOMUX_PAD(0x036C, 0x0024, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO04__OSC32K_32K_OUT                     = IOMUX_PAD(0x036C, 0x0024, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO04__ENET2_REF_CLK2                     = IOMUX_PAD(0x036C, 0x0024, 4, 0x076C, 0, 0),
+	 MX6_PAD_GPIO1_IO04__GPIO1_IO_4                         = IOMUX_PAD(0x036C, 0x0024, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO04__CCM_PLL2_BYP                       = IOMUX_PAD(0x036C, 0x0024, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO04__PHY_TMS                            = IOMUX_PAD(0x036C, 0x0024, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO05__UART1_RX                           = IOMUX_PAD(0x0370, 0x0028, 0, 0x0830, 1, 0),
+	 MX6_PAD_GPIO1_IO05__USDHC2_VSELECT                     = IOMUX_PAD(0x0370, 0x0028, 1, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO05__ENET1_MDIO                         = IOMUX_PAD(0x0370, 0x0028, 2, 0x0764, 0, 0),
+	 MX6_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                  = IOMUX_PAD(0x0370, 0x0028, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO05__ENET1_REF_CLK1                     = IOMUX_PAD(0x0370, 0x0028, 4, 0x0760, 0, 0),
+	 MX6_PAD_GPIO1_IO05__GPIO1_IO_5                         = IOMUX_PAD(0x0370, 0x0028, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO05__SRC_TESTER_ACK                     = IOMUX_PAD(0x0370, 0x0028, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO05__PHY_TDO                            = IOMUX_PAD(0x0370, 0x0028, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO06__UART2_TX                           = IOMUX_PAD(0x0374, 0x002C, 0, 0x0838, 0, 0),
+	 MX6_PAD_GPIO1_IO06__USDHC2_CD_B                        = IOMUX_PAD(0x0374, 0x002C, 1, 0x086C, 1, 0),
+	 MX6_PAD_GPIO1_IO06__ENET2_MDC                          = IOMUX_PAD(0x0374, 0x002C, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO06__CSI1_MCLK                          = IOMUX_PAD(0x0374, 0x002C, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO06__UART1_RTS_B                        = IOMUX_PAD(0x0374, 0x002C, 4, 0x082C, 0, 0),
+	 MX6_PAD_GPIO1_IO06__GPIO1_IO_6                         = IOMUX_PAD(0x0374, 0x002C, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                   = IOMUX_PAD(0x0374, 0x002C, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED    = IOMUX_PAD(0x0374, 0x002C, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO07__UART2_RX                           = IOMUX_PAD(0x0378, 0x0030, 0, 0x0838, 1, 0),
+	 MX6_PAD_GPIO1_IO07__USDHC2_WP                          = IOMUX_PAD(0x0378, 0x0030, 1, 0x0870, 1, 0),
+	 MX6_PAD_GPIO1_IO07__ENET2_MDIO                         = IOMUX_PAD(0x0378, 0x0030, 2, 0x0770, 0, 0),
+	 MX6_PAD_GPIO1_IO07__AUDMUX_MCLK                        = IOMUX_PAD(0x0378, 0x0030, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO07__UART1_CTS_B                        = IOMUX_PAD(0x0378, 0x0030, 4, 0x082C, 1, 0),
+	 MX6_PAD_GPIO1_IO07__GPIO1_IO_7                         = IOMUX_PAD(0x0378, 0x0030, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO07__SRC_EARLY_RESET                    = IOMUX_PAD(0x0378, 0x0030, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO07__DCIC2_OUT                          = IOMUX_PAD(0x0378, 0x0030, 7, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO07__VDEC_DEBUG_44                      = IOMUX_PAD(0x0378, 0x0030, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO08__USB_OTG1_OC                        = IOMUX_PAD(0x037C, 0x0034, 0, 0x0860, 0, 0),
+	 MX6_PAD_GPIO1_IO08__WDOG1_WDOG_B                       = IOMUX_PAD(0x037C, 0x0034, 1, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                   = IOMUX_PAD(0x037C, 0x0034, 2, 0x081C, 0, 0),
+	 MX6_PAD_GPIO1_IO08__CCM_PMIC_RDY                       = IOMUX_PAD(0x037C, 0x0034, 3, 0x069C, 1, 0),
+	 MX6_PAD_GPIO1_IO08__UART2_RTS_B                        = IOMUX_PAD(0x037C, 0x0034, 4, 0x0834, 0, 0),
+	 MX6_PAD_GPIO1_IO08__GPIO1_IO_8                         = IOMUX_PAD(0x037C, 0x0034, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                   = IOMUX_PAD(0x037C, 0x0034, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO08__DCIC1_OUT                          = IOMUX_PAD(0x037C, 0x0034, 7, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO08__VDEC_DEBUG_43                      = IOMUX_PAD(0x037C, 0x0034, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO09__USB_OTG1_PWR                       = IOMUX_PAD(0x0380, 0x0038, 0, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO09__WDOG2_WDOG_B                       = IOMUX_PAD(0x0380, 0x0038, 1, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                   = IOMUX_PAD(0x0380, 0x0038, 2, 0x0820, 0, 0),
+	 MX6_PAD_GPIO1_IO09__CCM_OUT0                           = IOMUX_PAD(0x0380, 0x0038, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO09__UART2_CTS_B                        = IOMUX_PAD(0x0380, 0x0038, 4, 0x0834, 1, 0),
+	 MX6_PAD_GPIO1_IO09__GPIO1_IO_9                         = IOMUX_PAD(0x0380, 0x0038, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO09__SRC_INT_BOOT                       = IOMUX_PAD(0x0380, 0x0038, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                  = IOMUX_PAD(0x0380, 0x0038, 7, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO09__VDEC_DEBUG_42                      = IOMUX_PAD(0x0380, 0x0038, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID                     = IOMUX_PAD(0x0384, 0x003C, 0, 0x0624, 0, 0),
+	 MX6_PAD_GPIO1_IO10__SPDIF_EXT_CLK                      = IOMUX_PAD(0x0384, 0x003C, 1, 0x0828, 0, 0),
+	 MX6_PAD_GPIO1_IO10__PWM1_OUT                           = IOMUX_PAD(0x0384, 0x003C, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO10__CCM_OUT1                           = IOMUX_PAD(0x0384, 0x003C, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO10__CSI1_FIELD                         = IOMUX_PAD(0x0384, 0x003C, 4, 0x070C, 1, 0),
+	 MX6_PAD_GPIO1_IO10__GPIO1_IO_10                        = IOMUX_PAD(0x0384, 0x003C, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                    = IOMUX_PAD(0x0384, 0x003C, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                  = IOMUX_PAD(0x0384, 0x003C, 7, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO10__VDEC_DEBUG_41                      = IOMUX_PAD(0x0384, 0x003C, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO11__USB_OTG2_OC                        = IOMUX_PAD(0x0388, 0x0040, 0, 0x085C, 0, 0),
+	 MX6_PAD_GPIO1_IO11__SPDIF_IN                           = IOMUX_PAD(0x0388, 0x0040, 1, 0x0824, 2, 0),
+	 MX6_PAD_GPIO1_IO11__PWM2_OUT                           = IOMUX_PAD(0x0388, 0x0040, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO11__CCM_CLKO1                          = IOMUX_PAD(0x0388, 0x0040, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO11__MLB_DATA                           = IOMUX_PAD(0x0388, 0x0040, 4, 0x07EC, 0, 0),
+	 MX6_PAD_GPIO1_IO11__GPIO1_IO_11                        = IOMUX_PAD(0x0388, 0x0040, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                = IOMUX_PAD(0x0388, 0x0040, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                  = IOMUX_PAD(0x0388, 0x0040, 7, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO11__VDEC_DEBUG_40                      = IOMUX_PAD(0x0388, 0x0040, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO12__USB_OTG2_PWR                       = IOMUX_PAD(0x038C, 0x0044, 0, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO12__SPDIF_OUT                          = IOMUX_PAD(0x038C, 0x0044, 1, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO12__PWM3_OUT                           = IOMUX_PAD(0x038C, 0x0044, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO12__CCM_CLKO2                          = IOMUX_PAD(0x038C, 0x0044, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO12__MLB_CLK                            = IOMUX_PAD(0x038C, 0x0044, 4, 0x07E8, 0, 0),
+	 MX6_PAD_GPIO1_IO12__GPIO1_IO_12                        = IOMUX_PAD(0x038C, 0x0044, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                = IOMUX_PAD(0x038C, 0x0044, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                  = IOMUX_PAD(0x038C, 0x0044, 7, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO12__VDEC_DEBUG_39                      = IOMUX_PAD(0x038C, 0x0044, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                     = IOMUX_PAD(0x0390, 0x0048, 0, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO13__ANATOP_OTG2_ID                     = IOMUX_PAD(0x0390, 0x0048, 1, 0x0628, 0, 0),
+	 MX6_PAD_GPIO1_IO13__PWM4_OUT                           = IOMUX_PAD(0x0390, 0x0048, 2, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO13__CCM_OUT2                           = IOMUX_PAD(0x0390, 0x0048, 3, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO13__MLB_SIG                            = IOMUX_PAD(0x0390, 0x0048, 4, 0x07F0, 0, 0),
+	 MX6_PAD_GPIO1_IO13__GPIO1_IO_13                        = IOMUX_PAD(0x0390, 0x0048, 5, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                = IOMUX_PAD(0x0390, 0x0048, 6, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                  = IOMUX_PAD(0x0390, 0x0048, 7, 0x0000, 0, 0),
+	 MX6_PAD_GPIO1_IO13__VDEC_DEBUG_38                      = IOMUX_PAD(0x0390, 0x0048, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_DATA00__CSI1_DATA_2                        = IOMUX_PAD(0x0394, 0x004C, 0, 0x06A8, 0, 0),
+	 MX6_PAD_CSI_DATA00__ESAI_TX_CLK                        = IOMUX_PAD(0x0394, 0x004C, 1, 0x078C, 1, 0),
+	 MX6_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                    = IOMUX_PAD(0x0394, 0x004C, 2, 0x0684, 1, 0),
+	 MX6_PAD_CSI_DATA00__I2C1_SCL                           = IOMUX_PAD(0x0394, 0x004C, IOMUX_CONFIG_SION | 3, 0x07A8, 0, 0),
+	 MX6_PAD_CSI_DATA00__UART6_RI_B                         = IOMUX_PAD(0x0394, 0x004C, 4, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA00__GPIO1_IO_14                        = IOMUX_PAD(0x0394, 0x004C, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA00__WEIM_DATA_23                       = IOMUX_PAD(0x0394, 0x004C, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA00__SAI1_TX_BCLK                       = IOMUX_PAD(0x0394, 0x004C, 7, 0x0800, 0, 0),
+	 MX6_PAD_CSI_DATA00__VADC_DATA_4                        = IOMUX_PAD(0x0394, 0x004C, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA00__MMDC_DEBUG_37                      = IOMUX_PAD(0x0394, 0x004C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_DATA01__CSI1_DATA_3                        = IOMUX_PAD(0x0398, 0x0050, 0, 0x06AC, 0, 0),
+	 MX6_PAD_CSI_DATA01__ESAI_TX_FS                         = IOMUX_PAD(0x0398, 0x0050, 1, 0x077C, 1, 0),
+	 MX6_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                   = IOMUX_PAD(0x0398, 0x0050, 2, 0x0688, 1, 0),
+	 MX6_PAD_CSI_DATA01__I2C1_SDA                           = IOMUX_PAD(0x0398, 0x0050, IOMUX_CONFIG_SION | 3, 0x07AC, 0, 0),
+	 MX6_PAD_CSI_DATA01__UART6_DSR_B                        = IOMUX_PAD(0x0398, 0x0050, 4, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA01__GPIO1_IO_15                        = IOMUX_PAD(0x0398, 0x0050, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA01__WEIM_DATA_22                       = IOMUX_PAD(0x0398, 0x0050, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA01__SAI1_TX_SYNC                       = IOMUX_PAD(0x0398, 0x0050, 7, 0x0804, 0, 0),
+	 MX6_PAD_CSI_DATA01__VADC_DATA_5                        = IOMUX_PAD(0x0398, 0x0050, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA01__MMDC_DEBUG_38                      = IOMUX_PAD(0x0398, 0x0050, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_DATA02__CSI1_DATA_4                        = IOMUX_PAD(0x039C, 0x0054, 0, 0x06B0, 0, 0),
+	 MX6_PAD_CSI_DATA02__ESAI_RX_CLK                        = IOMUX_PAD(0x039C, 0x0054, 1, 0x0788, 1, 0),
+	 MX6_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                    = IOMUX_PAD(0x039C, 0x0054, 2, 0x067C, 1, 0),
+	 MX6_PAD_CSI_DATA02__KPP_COL_5                          = IOMUX_PAD(0x039C, 0x0054, 3, 0x07C8, 0, 0),
+	 MX6_PAD_CSI_DATA02__UART6_DTR_B                        = IOMUX_PAD(0x039C, 0x0054, 4, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA02__GPIO1_IO_16                        = IOMUX_PAD(0x039C, 0x0054, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA02__WEIM_DATA_21                       = IOMUX_PAD(0x039C, 0x0054, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA02__SAI1_RX_BCLK                       = IOMUX_PAD(0x039C, 0x0054, 7, 0x07F4, 0, 0),
+	 MX6_PAD_CSI_DATA02__VADC_DATA_6                        = IOMUX_PAD(0x039C, 0x0054, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA02__MMDC_DEBUG_39                      = IOMUX_PAD(0x039C, 0x0054, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_DATA03__CSI1_DATA_5                        = IOMUX_PAD(0x03A0, 0x0058, 0, 0x06B4, 0, 0),
+	 MX6_PAD_CSI_DATA03__ESAI_RX_FS                         = IOMUX_PAD(0x03A0, 0x0058, 1, 0x0778, 1, 0),
+	 MX6_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                   = IOMUX_PAD(0x03A0, 0x0058, 2, 0x0680, 1, 0),
+	 MX6_PAD_CSI_DATA03__KPP_ROW_5                          = IOMUX_PAD(0x03A0, 0x0058, 3, 0x07D4, 0, 0),
+	 MX6_PAD_CSI_DATA03__UART6_DCD_B                        = IOMUX_PAD(0x03A0, 0x0058, 4, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA03__GPIO1_IO_17                        = IOMUX_PAD(0x03A0, 0x0058, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA03__WEIM_DATA_20                       = IOMUX_PAD(0x03A0, 0x0058, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA03__SAI1_RX_SYNC                       = IOMUX_PAD(0x03A0, 0x0058, 7, 0x07FC, 0, 0),
+	 MX6_PAD_CSI_DATA03__VADC_DATA_7                        = IOMUX_PAD(0x03A0, 0x0058, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA03__MMDC_DEBUG_40                      = IOMUX_PAD(0x03A0, 0x0058, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_DATA04__CSI1_DATA_6                        = IOMUX_PAD(0x03A4, 0x005C, 0, 0x06B8, 0, 0),
+	 MX6_PAD_CSI_DATA04__ESAI_TX1                           = IOMUX_PAD(0x03A4, 0x005C, 1, 0x0794, 1, 0),
+	 MX6_PAD_CSI_DATA04__SPDIF_OUT                          = IOMUX_PAD(0x03A4, 0x005C, 2, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA04__KPP_COL_6                          = IOMUX_PAD(0x03A4, 0x005C, 3, 0x07CC, 0, 0),
+	 MX6_PAD_CSI_DATA04__UART6_RX                           = IOMUX_PAD(0x03A4, 0x005C, 4, 0x0858, 0, 0),
+	 MX6_PAD_CSI_DATA04__GPIO1_IO_18                        = IOMUX_PAD(0x03A4, 0x005C, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA04__WEIM_DATA_19                       = IOMUX_PAD(0x03A4, 0x005C, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA04__PWM5_OUT                           = IOMUX_PAD(0x03A4, 0x005C, 7, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA04__VADC_DATA_8                        = IOMUX_PAD(0x03A4, 0x005C, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA04__MMDC_DEBUG_41                      = IOMUX_PAD(0x03A4, 0x005C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_DATA05__CSI1_DATA_7                        = IOMUX_PAD(0x03A8, 0x0060, 0, 0x06BC, 0, 0),
+	 MX6_PAD_CSI_DATA05__ESAI_TX4_RX1                       = IOMUX_PAD(0x03A8, 0x0060, 1, 0x07A0, 1, 0),
+	 MX6_PAD_CSI_DATA05__SPDIF_IN                           = IOMUX_PAD(0x03A8, 0x0060, 2, 0x0824, 1, 0),
+	 MX6_PAD_CSI_DATA05__KPP_ROW_6                          = IOMUX_PAD(0x03A8, 0x0060, 3, 0x07D8, 0, 0),
+	 MX6_PAD_CSI_DATA05__UART6_TX                           = IOMUX_PAD(0x03A8, 0x0060, 4, 0x0858, 1, 0),
+	 MX6_PAD_CSI_DATA05__GPIO1_IO_19                        = IOMUX_PAD(0x03A8, 0x0060, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA05__WEIM_DATA_18                       = IOMUX_PAD(0x03A8, 0x0060, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA05__PWM6_OUT                           = IOMUX_PAD(0x03A8, 0x0060, 7, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA05__VADC_DATA_9                        = IOMUX_PAD(0x03A8, 0x0060, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA05__MMDC_DEBUG_42                      = IOMUX_PAD(0x03A8, 0x0060, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_DATA06__CSI1_DATA_8                        = IOMUX_PAD(0x03AC, 0x0064, 0, 0x06C0, 0, 0),
+	 MX6_PAD_CSI_DATA06__ESAI_TX2_RX3                       = IOMUX_PAD(0x03AC, 0x0064, 1, 0x0798, 1, 0),
+	 MX6_PAD_CSI_DATA06__I2C4_SCL                           = IOMUX_PAD(0x03AC, 0x0064, IOMUX_CONFIG_SION | 2, 0x07C0, 2, 0),
+	 MX6_PAD_CSI_DATA06__KPP_COL_7                          = IOMUX_PAD(0x03AC, 0x0064, 3, 0x07D0, 0, 0),
+	 MX6_PAD_CSI_DATA06__UART6_RTS_B                        = IOMUX_PAD(0x03AC, 0x0064, 4, 0x0854, 0, 0),
+	 MX6_PAD_CSI_DATA06__GPIO1_IO_20                        = IOMUX_PAD(0x03AC, 0x0064, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA06__WEIM_DATA_17                       = IOMUX_PAD(0x03AC, 0x0064, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA06__DCIC2_OUT                          = IOMUX_PAD(0x03AC, 0x0064, 7, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA06__VADC_DATA_10                       = IOMUX_PAD(0x03AC, 0x0064, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA06__MMDC_DEBUG_43                      = IOMUX_PAD(0x03AC, 0x0064, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_DATA07__CSI1_DATA_9                        = IOMUX_PAD(0x03B0, 0x0068, 0, 0x06C4, 0, 0),
+	 MX6_PAD_CSI_DATA07__ESAI_TX3_RX2                       = IOMUX_PAD(0x03B0, 0x0068, 1, 0x079C, 1, 0),
+	 MX6_PAD_CSI_DATA07__I2C4_SDA                           = IOMUX_PAD(0x03B0, 0x0068, IOMUX_CONFIG_SION | 2, 0x07C4, 2, 0),
+	 MX6_PAD_CSI_DATA07__KPP_ROW_7                          = IOMUX_PAD(0x03B0, 0x0068, 3, 0x07DC, 0, 0),
+	 MX6_PAD_CSI_DATA07__UART6_CTS_B                        = IOMUX_PAD(0x03B0, 0x0068, 4, 0x0854, 1, 0),
+	 MX6_PAD_CSI_DATA07__GPIO1_IO_21                        = IOMUX_PAD(0x03B0, 0x0068, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA07__WEIM_DATA_16                       = IOMUX_PAD(0x03B0, 0x0068, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA07__DCIC1_OUT                          = IOMUX_PAD(0x03B0, 0x0068, 7, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA07__VADC_DATA_11                       = IOMUX_PAD(0x03B0, 0x0068, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_DATA07__MMDC_DEBUG_44                      = IOMUX_PAD(0x03B0, 0x0068, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_HSYNC__CSI1_HSYNC                          = IOMUX_PAD(0x03B4, 0x006C, 0, 0x0700, 0, 0),
+	 MX6_PAD_CSI_HSYNC__ESAI_TX0                            = IOMUX_PAD(0x03B4, 0x006C, 1, 0x0790, 1, 0),
+	 MX6_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                     = IOMUX_PAD(0x03B4, 0x006C, 2, 0x0678, 1, 0),
+	 MX6_PAD_CSI_HSYNC__UART4_RTS_B                         = IOMUX_PAD(0x03B4, 0x006C, 3, 0x0844, 2, 0),
+	 MX6_PAD_CSI_HSYNC__MQS_LEFT                            = IOMUX_PAD(0x03B4, 0x006C, 4, 0x0000, 0, 0),
+	 MX6_PAD_CSI_HSYNC__GPIO1_IO_22                         = IOMUX_PAD(0x03B4, 0x006C, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_HSYNC__WEIM_DATA_25                        = IOMUX_PAD(0x03B4, 0x006C, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_HSYNC__SAI1_TX_DATA_0                      = IOMUX_PAD(0x03B4, 0x006C, 7, 0x0000, 0, 0),
+	 MX6_PAD_CSI_HSYNC__VADC_DATA_2                         = IOMUX_PAD(0x03B4, 0x006C, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_HSYNC__MMDC_DEBUG_35                       = IOMUX_PAD(0x03B4, 0x006C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_MCLK__CSI1_MCLK                            = IOMUX_PAD(0x03B8, 0x0070, 0, 0x0000, 0, 0),
+	 MX6_PAD_CSI_MCLK__ESAI_TX_HF_CLK                       = IOMUX_PAD(0x03B8, 0x0070, 1, 0x0784, 1, 0),
+	 MX6_PAD_CSI_MCLK__OSC32K_32K_OUT                       = IOMUX_PAD(0x03B8, 0x0070, 2, 0x0000, 0, 0),
+	 MX6_PAD_CSI_MCLK__UART4_RX                             = IOMUX_PAD(0x03B8, 0x0070, 3, 0x0848, 2, 0),
+	 MX6_PAD_CSI_MCLK__ANATOP_32K_OUT                       = IOMUX_PAD(0x03B8, 0x0070, 4, 0x0000, 0, 0),
+	 MX6_PAD_CSI_MCLK__GPIO1_IO_23                          = IOMUX_PAD(0x03B8, 0x0070, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_MCLK__WEIM_DATA_26                         = IOMUX_PAD(0x03B8, 0x0070, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_MCLK__CSI1_FIELD                           = IOMUX_PAD(0x03B8, 0x0070, 7, 0x070C, 0, 0),
+	 MX6_PAD_CSI_MCLK__VADC_DATA_1                          = IOMUX_PAD(0x03B8, 0x0070, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_MCLK__MMDC_DEBUG_34                        = IOMUX_PAD(0x03B8, 0x0070, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_PIXCLK__CSI1_PIXCLK                        = IOMUX_PAD(0x03BC, 0x0074, 0, 0x0704, 0, 0),
+	 MX6_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                     = IOMUX_PAD(0x03BC, 0x0074, 1, 0x0780, 1, 0),
+	 MX6_PAD_CSI_PIXCLK__AUDMUX_MCLK                        = IOMUX_PAD(0x03BC, 0x0074, 2, 0x0000, 0, 0),
+	 MX6_PAD_CSI_PIXCLK__UART4_TX                           = IOMUX_PAD(0x03BC, 0x0074, 3, 0x0848, 3, 0),
+	 MX6_PAD_CSI_PIXCLK__ANATOP_24M_OUT                     = IOMUX_PAD(0x03BC, 0x0074, 4, 0x0000, 0, 0),
+	 MX6_PAD_CSI_PIXCLK__GPIO1_IO_24                        = IOMUX_PAD(0x03BC, 0x0074, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_PIXCLK__WEIM_DATA_27                       = IOMUX_PAD(0x03BC, 0x0074, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                     = IOMUX_PAD(0x03BC, 0x0074, 7, 0x0784, 2, 0),
+	 MX6_PAD_CSI_PIXCLK__VADC_CLK                           = IOMUX_PAD(0x03BC, 0x0074, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_PIXCLK__MMDC_DEBUG_33                      = IOMUX_PAD(0x03BC, 0x0074, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_CSI_VSYNC__CSI1_VSYNC                          = IOMUX_PAD(0x03C0, 0x0078, 0, 0x0708, 0, 0),
+	 MX6_PAD_CSI_VSYNC__ESAI_TX5_RX0                        = IOMUX_PAD(0x03C0, 0x0078, 1, 0x07A4, 1, 0),
+	 MX6_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                     = IOMUX_PAD(0x03C0, 0x0078, 2, 0x0674, 1, 0),
+	 MX6_PAD_CSI_VSYNC__UART4_CTS_B                         = IOMUX_PAD(0x03C0, 0x0078, 3, 0x0844, 3, 0),
+	 MX6_PAD_CSI_VSYNC__MQS_RIGHT                           = IOMUX_PAD(0x03C0, 0x0078, 4, 0x0000, 0, 0),
+	 MX6_PAD_CSI_VSYNC__GPIO1_IO_25                         = IOMUX_PAD(0x03C0, 0x0078, 5, 0x0000, 0, 0),
+	 MX6_PAD_CSI_VSYNC__WEIM_DATA_24                        = IOMUX_PAD(0x03C0, 0x0078, 6, 0x0000, 0, 0),
+	 MX6_PAD_CSI_VSYNC__SAI1_RX_DATA_0                      = IOMUX_PAD(0x03C0, 0x0078, 7, 0x07F8, 0, 0),
+	 MX6_PAD_CSI_VSYNC__VADC_DATA_3                         = IOMUX_PAD(0x03C0, 0x0078, 8, 0x0000, 0, 0),
+	 MX6_PAD_CSI_VSYNC__MMDC_DEBUG_36                       = IOMUX_PAD(0x03C0, 0x0078, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET1_COL__ENET1_COL                           = IOMUX_PAD(0x03C4, 0x007C, 0, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_COL__ENET2_MDC                           = IOMUX_PAD(0x03C4, 0x007C, 1, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_COL__AUDMUX_AUD4_TXC                     = IOMUX_PAD(0x03C4, 0x007C, 2, 0x0654, 1, 0),
+	 MX6_PAD_ENET1_COL__UART1_RI_B                          = IOMUX_PAD(0x03C4, 0x007C, 3, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_COL__SPDIF_EXT_CLK                       = IOMUX_PAD(0x03C4, 0x007C, 4, 0x0828, 1, 0),
+	 MX6_PAD_ENET1_COL__GPIO2_IO_0                          = IOMUX_PAD(0x03C4, 0x007C, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_COL__CSI2_DATA_23                        = IOMUX_PAD(0x03C4, 0x007C, 6, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_COL__LCDIF2_DATA_16                      = IOMUX_PAD(0x03C4, 0x007C, 7, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_COL__VDEC_DEBUG_37                       = IOMUX_PAD(0x03C4, 0x007C, 8, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                  = IOMUX_PAD(0x03C4, 0x007C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET1_CRS__ENET1_CRS                           = IOMUX_PAD(0x03C8, 0x0080, 0, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_CRS__ENET2_MDIO                          = IOMUX_PAD(0x03C8, 0x0080, 1, 0x0770, 1, 0),
+	 MX6_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                     = IOMUX_PAD(0x03C8, 0x0080, 2, 0x0648, 1, 0),
+	 MX6_PAD_ENET1_CRS__UART1_DCD_B                         = IOMUX_PAD(0x03C8, 0x0080, 3, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_CRS__SPDIF_LOCK                          = IOMUX_PAD(0x03C8, 0x0080, 4, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_CRS__GPIO2_IO_1                          = IOMUX_PAD(0x03C8, 0x0080, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_CRS__CSI2_DATA_22                        = IOMUX_PAD(0x03C8, 0x0080, 6, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_CRS__LCDIF2_DATA_17                      = IOMUX_PAD(0x03C8, 0x0080, 7, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_CRS__VDEC_DEBUG_36                       = IOMUX_PAD(0x03C8, 0x0080, 8, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                  = IOMUX_PAD(0x03C8, 0x0080, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET1_MDC__ENET1_MDC                           = IOMUX_PAD(0x03CC, 0x0084, 0, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDC__ENET2_MDC                           = IOMUX_PAD(0x03CC, 0x0084, 1, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                    = IOMUX_PAD(0x03CC, 0x0084, 2, 0x0638, 1, 0),
+	 MX6_PAD_ENET1_MDC__ANATOP_24M_OUT                      = IOMUX_PAD(0x03CC, 0x0084, 3, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDC__EPIT2_OUT                           = IOMUX_PAD(0x03CC, 0x0084, 4, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDC__GPIO2_IO_2                          = IOMUX_PAD(0x03CC, 0x0084, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDC__USB_OTG1_PWR                        = IOMUX_PAD(0x03CC, 0x0084, 6, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDC__PWM7_OUT                            = IOMUX_PAD(0x03CC, 0x0084, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET1_MDIO__ENET1_MDIO                         = IOMUX_PAD(0x03D0, 0x0088, 0, 0x0764, 1, 0),
+	 MX6_PAD_ENET1_MDIO__ENET2_MDIO                         = IOMUX_PAD(0x03D0, 0x0088, 1, 0x0770, 2, 0),
+	 MX6_PAD_ENET1_MDIO__AUDMUX_MCLK                        = IOMUX_PAD(0x03D0, 0x0088, 2, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDIO__OSC32K_32K_OUT                     = IOMUX_PAD(0x03D0, 0x0088, 3, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDIO__EPIT1_OUT                          = IOMUX_PAD(0x03D0, 0x0088, 4, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDIO__GPIO2_IO_3                         = IOMUX_PAD(0x03D0, 0x0088, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_MDIO__USB_OTG1_OC                        = IOMUX_PAD(0x03D0, 0x0088, 6, 0x0860, 1, 0),
+	 MX6_PAD_ENET1_MDIO__PWM8_OUT                           = IOMUX_PAD(0x03D0, 0x0088, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET1_RX_CLK__ENET1_RX_CLK                     = IOMUX_PAD(0x03D4, 0x008C, 0, 0x0768, 0, 0),
+	 MX6_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                = IOMUX_PAD(0x03D4, 0x008C, 1, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                 = IOMUX_PAD(0x03D4, 0x008C, 2, 0x0658, 1, 0),
+	 MX6_PAD_ENET1_RX_CLK__UART1_DSR_B                      = IOMUX_PAD(0x03D4, 0x008C, 3, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_RX_CLK__SPDIF_OUT                        = IOMUX_PAD(0x03D4, 0x008C, 4, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_RX_CLK__GPIO2_IO_4                       = IOMUX_PAD(0x03D4, 0x008C, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_RX_CLK__CSI2_DATA_21                     = IOMUX_PAD(0x03D4, 0x008C, 6, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                   = IOMUX_PAD(0x03D4, 0x008C, 7, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                    = IOMUX_PAD(0x03D4, 0x008C, 8, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29               = IOMUX_PAD(0x03D4, 0x008C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET1_TX_CLK__ENET1_TX_CLK                     = IOMUX_PAD(0x03D8, 0x0090, 0, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                   = IOMUX_PAD(0x03D8, 0x0090, 1, 0x0760, 1, 0),
+	 MX6_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                  = IOMUX_PAD(0x03D8, 0x0090, 2, 0x0644, 1, 0),
+	 MX6_PAD_ENET1_TX_CLK__UART1_DTR_B                      = IOMUX_PAD(0x03D8, 0x0090, 3, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                     = IOMUX_PAD(0x03D8, 0x0090, 4, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_TX_CLK__GPIO2_IO_5                       = IOMUX_PAD(0x03D8, 0x0090, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_TX_CLK__CSI2_DATA_20                     = IOMUX_PAD(0x03D8, 0x0090, 6, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                   = IOMUX_PAD(0x03D8, 0x0090, 7, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                    = IOMUX_PAD(0x03D8, 0x0090, 8, 0x0000, 0, 0),
+	 MX6_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28               = IOMUX_PAD(0x03D8, 0x0090, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET2_COL__ENET2_COL                           = IOMUX_PAD(0x03DC, 0x0094, 0, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_COL__ENET1_MDC                           = IOMUX_PAD(0x03DC, 0x0094, 1, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_COL__AUDMUX_AUD4_RXC                     = IOMUX_PAD(0x03DC, 0x0094, 2, 0x064C, 1, 0),
+	 MX6_PAD_ENET2_COL__UART1_RX                            = IOMUX_PAD(0x03DC, 0x0094, 3, 0x0830, 2, 0),
+	 MX6_PAD_ENET2_COL__SPDIF_IN                            = IOMUX_PAD(0x03DC, 0x0094, 4, 0x0824, 3, 0),
+	 MX6_PAD_ENET2_COL__GPIO2_IO_6                          = IOMUX_PAD(0x03DC, 0x0094, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_COL__ANATOP_OTG1_ID                      = IOMUX_PAD(0x03DC, 0x0094, 6, 0x0624, 1, 0),
+	 MX6_PAD_ENET2_COL__LCDIF2_DATA_20                      = IOMUX_PAD(0x03DC, 0x0094, 7, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_COL__VDEC_DEBUG_33                       = IOMUX_PAD(0x03DC, 0x0094, 8, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                  = IOMUX_PAD(0x03DC, 0x0094, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET2_CRS__ENET2_CRS                           = IOMUX_PAD(0x03E0, 0x0098, 0, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_CRS__ENET1_MDIO                          = IOMUX_PAD(0x03E0, 0x0098, 1, 0x0764, 2, 0),
+	 MX6_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                    = IOMUX_PAD(0x03E0, 0x0098, 2, 0x0650, 1, 0),
+	 MX6_PAD_ENET2_CRS__UART1_TX                            = IOMUX_PAD(0x03E0, 0x0098, 3, 0x0830, 3, 0),
+	 MX6_PAD_ENET2_CRS__MLB_SIG                             = IOMUX_PAD(0x03E0, 0x0098, 4, 0x07F0, 1, 0),
+	 MX6_PAD_ENET2_CRS__GPIO2_IO_7                          = IOMUX_PAD(0x03E0, 0x0098, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_CRS__ANATOP_OTG2_ID                      = IOMUX_PAD(0x03E0, 0x0098, 6, 0x0628, 1, 0),
+	 MX6_PAD_ENET2_CRS__LCDIF2_DATA_21                      = IOMUX_PAD(0x03E0, 0x0098, 7, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_CRS__VDEC_DEBUG_32                       = IOMUX_PAD(0x03E0, 0x0098, 8, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                  = IOMUX_PAD(0x03E0, 0x0098, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET2_RX_CLK__ENET2_RX_CLK                     = IOMUX_PAD(0x03E4, 0x009C, 0, 0x0774, 0, 0),
+	 MX6_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                = IOMUX_PAD(0x03E4, 0x009C, 1, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_RX_CLK__I2C3_SCL                         = IOMUX_PAD(0x03E4, 0x009C, IOMUX_CONFIG_SION | 2, 0x07B8, 1, 0),
+	 MX6_PAD_ENET2_RX_CLK__UART1_RTS_B                      = IOMUX_PAD(0x03E4, 0x009C, 3, 0x082C, 2, 0),
+	 MX6_PAD_ENET2_RX_CLK__MLB_DATA                         = IOMUX_PAD(0x03E4, 0x009C, 4, 0x07EC, 1, 0),
+	 MX6_PAD_ENET2_RX_CLK__GPIO2_IO_8                       = IOMUX_PAD(0x03E4, 0x009C, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_RX_CLK__USB_OTG2_OC                      = IOMUX_PAD(0x03E4, 0x009C, 6, 0x085C, 1, 0),
+	 MX6_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                   = IOMUX_PAD(0x03E4, 0x009C, 7, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                    = IOMUX_PAD(0x03E4, 0x009C, 8, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25               = IOMUX_PAD(0x03E4, 0x009C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_ENET2_TX_CLK__ENET2_TX_CLK                     = IOMUX_PAD(0x03E8, 0x00A0, 0, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                   = IOMUX_PAD(0x03E8, 0x00A0, 1, 0x076C, 1, 0),
+	 MX6_PAD_ENET2_TX_CLK__I2C3_SDA                         = IOMUX_PAD(0x03E8, 0x00A0, IOMUX_CONFIG_SION | 2, 0x07BC, 1, 0),
+	 MX6_PAD_ENET2_TX_CLK__UART1_CTS_B                      = IOMUX_PAD(0x03E8, 0x00A0, 3, 0x082C, 3, 0),
+	 MX6_PAD_ENET2_TX_CLK__MLB_CLK                          = IOMUX_PAD(0x03E8, 0x00A0, 4, 0x07E8, 1, 0),
+	 MX6_PAD_ENET2_TX_CLK__GPIO2_IO_9                       = IOMUX_PAD(0x03E8, 0x00A0, 5, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_TX_CLK__USB_OTG2_PWR                     = IOMUX_PAD(0x03E8, 0x00A0, 6, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                   = IOMUX_PAD(0x03E8, 0x00A0, 7, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                    = IOMUX_PAD(0x03E8, 0x00A0, 8, 0x0000, 0, 0),
+	 MX6_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24               = IOMUX_PAD(0x03E8, 0x00A0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_KEY_COL0__KPP_COL_0                            = IOMUX_PAD(0x03EC, 0x00A4, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL0__USDHC3_CD_B                          = IOMUX_PAD(0x03EC, 0x00A4, 1, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL0__UART6_RTS_B                          = IOMUX_PAD(0x03EC, 0x00A4, 2, 0x0854, 2, 0),
+	 MX6_PAD_KEY_COL0__ECSPI1_SCLK                          = IOMUX_PAD(0x03EC, 0x00A4, 3, 0x0710, 0, 0),
+	 MX6_PAD_KEY_COL0__AUDMUX_AUD5_TXC                      = IOMUX_PAD(0x03EC, 0x00A4, 4, 0x066C, 0, 0),
+	 MX6_PAD_KEY_COL0__GPIO2_IO_10                          = IOMUX_PAD(0x03EC, 0x00A4, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL0__SDMA_EXT_EVENT_1                     = IOMUX_PAD(0x03EC, 0x00A4, 6, 0x0820, 1, 0),
+	 MX6_PAD_KEY_COL0__SAI2_TX_BCLK                         = IOMUX_PAD(0x03EC, 0x00A4, 7, 0x0814, 0, 0),
+	 MX6_PAD_KEY_COL0__VADC_DATA_0                          = IOMUX_PAD(0x03EC, 0x00A4, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_KEY_COL1__KPP_COL_1                            = IOMUX_PAD(0x03F0, 0x00A8, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL1__USDHC3_RESET_B                       = IOMUX_PAD(0x03F0, 0x00A8, 1, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL1__UART6_TX                             = IOMUX_PAD(0x03F0, 0x00A8, 2, 0x0858, 2, 0),
+	 MX6_PAD_KEY_COL1__ECSPI1_MISO                          = IOMUX_PAD(0x03F0, 0x00A8, 3, 0x0714, 0, 0),
+	 MX6_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                     = IOMUX_PAD(0x03F0, 0x00A8, 4, 0x0670, 0, 0),
+	 MX6_PAD_KEY_COL1__GPIO2_IO_11                          = IOMUX_PAD(0x03F0, 0x00A8, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL1__USDHC3_RESET                         = IOMUX_PAD(0x03F0, 0x00A8, 6, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL1__SAI2_TX_SYNC                         = IOMUX_PAD(0x03F0, 0x00A8, 7, 0x0818, 0, 0),
+
+	 MX6_PAD_KEY_COL2__KPP_COL_2                            = IOMUX_PAD(0x03F4, 0x00AC, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL2__USDHC4_CD_B                          = IOMUX_PAD(0x03F4, 0x00AC, 1, 0x0874, 1, 0),
+	 MX6_PAD_KEY_COL2__UART5_RTS_B                          = IOMUX_PAD(0x03F4, 0x00AC, 2, 0x084C, 2, 0),
+	 MX6_PAD_KEY_COL2__CAN1_TX                              = IOMUX_PAD(0x03F4, 0x00AC, 3, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL2__CANFD_TX1                            = IOMUX_PAD(0x03F4, 0x00AC, 4, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL2__GPIO2_IO_12                          = IOMUX_PAD(0x03F4, 0x00AC, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL2__WEIM_DATA_30                         = IOMUX_PAD(0x03F4, 0x00AC, 6, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL2__ECSPI1_RDY                           = IOMUX_PAD(0x03F4, 0x00AC, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_KEY_COL3__KPP_COL_3                            = IOMUX_PAD(0x03F8, 0x00B0, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL3__USDHC4_LCTL                          = IOMUX_PAD(0x03F8, 0x00B0, 1, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL3__UART5_TX                             = IOMUX_PAD(0x03F8, 0x00B0, 2, 0x0850, 2, 0),
+	 MX6_PAD_KEY_COL3__CAN2_TX                              = IOMUX_PAD(0x03F8, 0x00B0, 3, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL3__CANFD_TX2                            = IOMUX_PAD(0x03F8, 0x00B0, 4, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL3__GPIO2_IO_13                          = IOMUX_PAD(0x03F8, 0x00B0, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL3__WEIM_DATA_28                         = IOMUX_PAD(0x03F8, 0x00B0, 6, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL3__ECSPI1_SS2                           = IOMUX_PAD(0x03F8, 0x00B0, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_KEY_COL4__KPP_COL_4                            = IOMUX_PAD(0x03FC, 0x00B4, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL4__ENET2_MDC                            = IOMUX_PAD(0x03FC, 0x00B4, 1, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL4__I2C3_SCL                             = IOMUX_PAD(0x03FC, 0x00B4, IOMUX_CONFIG_SION | 2, 0x07B8, 2, 0),
+	 MX6_PAD_KEY_COL4__USDHC2_LCTL                          = IOMUX_PAD(0x03FC, 0x00B4, 3, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL4__AUDMUX_AUD5_RXC                      = IOMUX_PAD(0x03FC, 0x00B4, 4, 0x0664, 0, 0),
+	 MX6_PAD_KEY_COL4__GPIO2_IO_14                          = IOMUX_PAD(0x03FC, 0x00B4, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL4__WEIM_CRE                             = IOMUX_PAD(0x03FC, 0x00B4, 6, 0x0000, 0, 0),
+	 MX6_PAD_KEY_COL4__SAI2_RX_BCLK                         = IOMUX_PAD(0x03FC, 0x00B4, 7, 0x0808, 0, 0),
+
+	 MX6_PAD_KEY_ROW0__KPP_ROW_0                            = IOMUX_PAD(0x0400, 0x00B8, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW0__USDHC3_WP                            = IOMUX_PAD(0x0400, 0x00B8, 1, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW0__UART6_CTS_B                          = IOMUX_PAD(0x0400, 0x00B8, 2, 0x0854, 3, 0),
+	 MX6_PAD_KEY_ROW0__ECSPI1_MOSI                          = IOMUX_PAD(0x0400, 0x00B8, 3, 0x0718, 0, 0),
+	 MX6_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                      = IOMUX_PAD(0x0400, 0x00B8, 4, 0x0660, 0, 0),
+	 MX6_PAD_KEY_ROW0__GPIO2_IO_15                          = IOMUX_PAD(0x0400, 0x00B8, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                     = IOMUX_PAD(0x0400, 0x00B8, 6, 0x081C, 1, 0),
+	 MX6_PAD_KEY_ROW0__SAI2_TX_DATA_0                       = IOMUX_PAD(0x0400, 0x00B8, 7, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW0__GPU_IDLE                             = IOMUX_PAD(0x0400, 0x00B8, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_KEY_ROW1__KPP_ROW_1                            = IOMUX_PAD(0x0404, 0x00BC, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW1__USDHC4_VSELECT                       = IOMUX_PAD(0x0404, 0x00BC, 1, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW1__UART6_RX                             = IOMUX_PAD(0x0404, 0x00BC, 2, 0x0858, 3, 0),
+	 MX6_PAD_KEY_ROW1__ECSPI1_SS0                           = IOMUX_PAD(0x0404, 0x00BC, 3, 0x071C, 0, 0),
+	 MX6_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                      = IOMUX_PAD(0x0404, 0x00BC, 4, 0x065C, 0, 0),
+	 MX6_PAD_KEY_ROW1__GPIO2_IO_16                          = IOMUX_PAD(0x0404, 0x00BC, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW1__WEIM_DATA_31                         = IOMUX_PAD(0x0404, 0x00BC, 6, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW1__SAI2_RX_DATA_0                       = IOMUX_PAD(0x0404, 0x00BC, 7, 0x080C, 0, 0),
+	 MX6_PAD_KEY_ROW1__M4_NMI                               = IOMUX_PAD(0x0404, 0x00BC, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_KEY_ROW2__KPP_ROW_2                            = IOMUX_PAD(0x0408, 0x00C0, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW2__USDHC4_WP                            = IOMUX_PAD(0x0408, 0x00C0, 1, 0x0878, 1, 0),
+	 MX6_PAD_KEY_ROW2__UART5_CTS_B                          = IOMUX_PAD(0x0408, 0x00C0, 2, 0x084C, 3, 0),
+	 MX6_PAD_KEY_ROW2__CAN1_RX                              = IOMUX_PAD(0x0408, 0x00C0, 3, 0x068C, 1, 0),
+	 MX6_PAD_KEY_ROW2__CANFD_RX1                            = IOMUX_PAD(0x0408, 0x00C0, 4, 0x0694, 1, 0),
+	 MX6_PAD_KEY_ROW2__GPIO2_IO_17                          = IOMUX_PAD(0x0408, 0x00C0, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW2__WEIM_DATA_29                         = IOMUX_PAD(0x0408, 0x00C0, 6, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW2__ECSPI1_SS3                           = IOMUX_PAD(0x0408, 0x00C0, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_KEY_ROW3__KPP_ROW_3                            = IOMUX_PAD(0x040C, 0x00C4, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW3__USDHC3_LCTL                          = IOMUX_PAD(0x040C, 0x00C4, 1, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW3__UART5_RX                             = IOMUX_PAD(0x040C, 0x00C4, 2, 0x0850, 3, 0),
+	 MX6_PAD_KEY_ROW3__CAN2_RX                              = IOMUX_PAD(0x040C, 0x00C4, 3, 0x0690, 1, 0),
+	 MX6_PAD_KEY_ROW3__CANFD_RX2                            = IOMUX_PAD(0x040C, 0x00C4, 4, 0x0698, 1, 0),
+	 MX6_PAD_KEY_ROW3__GPIO2_IO_18                          = IOMUX_PAD(0x040C, 0x00C4, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW3__WEIM_DTACK_B                         = IOMUX_PAD(0x040C, 0x00C4, 6, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW3__ECSPI1_SS1                           = IOMUX_PAD(0x040C, 0x00C4, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_KEY_ROW4__KPP_ROW_4                            = IOMUX_PAD(0x0410, 0x00C8, 0, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW4__ENET2_MDIO                           = IOMUX_PAD(0x0410, 0x00C8, 1, 0x0770, 3, 0),
+	 MX6_PAD_KEY_ROW4__I2C3_SDA                             = IOMUX_PAD(0x0410, 0x00C8, IOMUX_CONFIG_SION | 2, 0x07BC, 2, 0),
+	 MX6_PAD_KEY_ROW4__USDHC1_LCTL                          = IOMUX_PAD(0x0410, 0x00C8, 3, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                     = IOMUX_PAD(0x0410, 0x00C8, 4, 0x0668, 0, 0),
+	 MX6_PAD_KEY_ROW4__GPIO2_IO_19                          = IOMUX_PAD(0x0410, 0x00C8, 5, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                    = IOMUX_PAD(0x0410, 0x00C8, 6, 0x0000, 0, 0),
+	 MX6_PAD_KEY_ROW4__SAI2_RX_SYNC                         = IOMUX_PAD(0x0410, 0x00C8, 7, 0x0810, 0, 0),
+
+	 MX6_PAD_LCD1_CLK__LCDIF1_CLK                           = IOMUX_PAD(0x0414, 0x00CC, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_CLK__LCDIF1_WR_RWN                        = IOMUX_PAD(0x0414, 0x00CC, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                      = IOMUX_PAD(0x0414, 0x00CC, 2, 0x0634, 1, 0),
+	 MX6_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                 = IOMUX_PAD(0x0414, 0x00CC, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_CLK__CSI1_DATA_16                         = IOMUX_PAD(0x0414, 0x00CC, 4, 0x06DC, 0, 0),
+	 MX6_PAD_LCD1_CLK__GPIO3_IO_0                           = IOMUX_PAD(0x0414, 0x00CC, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_CLK__USDHC1_WP                            = IOMUX_PAD(0x0414, 0x00CC, 6, 0x0868, 0, 0),
+	 MX6_PAD_LCD1_CLK__SIM_M_HADDR_16                       = IOMUX_PAD(0x0414, 0x00CC, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_CLK__VADC_TEST_0                          = IOMUX_PAD(0x0414, 0x00CC, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_CLK__MMDC_DEBUG_0                         = IOMUX_PAD(0x0414, 0x00CC, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA00__LCDIF1_DATA_0                     = IOMUX_PAD(0x0418, 0x00D0, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA00__WEIM_CS1_B                        = IOMUX_PAD(0x0418, 0x00D0, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA00__M4_TRACE_0                        = IOMUX_PAD(0x0418, 0x00D0, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA00__KITTEN_TRACE_0                    = IOMUX_PAD(0x0418, 0x00D0, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA00__CSI1_DATA_20                      = IOMUX_PAD(0x0418, 0x00D0, 4, 0x06EC, 0, 0),
+	 MX6_PAD_LCD1_DATA00__GPIO3_IO_1                        = IOMUX_PAD(0x0418, 0x00D0, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA00__SRC_BT_CFG_0                      = IOMUX_PAD(0x0418, 0x00D0, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA00__SIM_M_HADDR_21                    = IOMUX_PAD(0x0418, 0x00D0, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA00__VADC_TEST_5                       = IOMUX_PAD(0x0418, 0x00D0, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA00__MMDC_DEBUG_5                      = IOMUX_PAD(0x0418, 0x00D0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA01__LCDIF1_DATA_1                     = IOMUX_PAD(0x041C, 0x00D4, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA01__WEIM_CS2_B                        = IOMUX_PAD(0x041C, 0x00D4, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA01__M4_TRACE_1                        = IOMUX_PAD(0x041C, 0x00D4, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA01__KITTEN_TRACE_1                    = IOMUX_PAD(0x041C, 0x00D4, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA01__CSI1_DATA_21                      = IOMUX_PAD(0x041C, 0x00D4, 4, 0x06F0, 0, 0),
+	 MX6_PAD_LCD1_DATA01__GPIO3_IO_2                        = IOMUX_PAD(0x041C, 0x00D4, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA01__SRC_BT_CFG_1                      = IOMUX_PAD(0x041C, 0x00D4, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA01__SIM_M_HADDR_22                    = IOMUX_PAD(0x041C, 0x00D4, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA01__VADC_TEST_6                       = IOMUX_PAD(0x041C, 0x00D4, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA01__MMDC_DEBUG_6                      = IOMUX_PAD(0x041C, 0x00D4, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA02__LCDIF1_DATA_2                     = IOMUX_PAD(0x0420, 0x00D8, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA02__WEIM_CS3_B                        = IOMUX_PAD(0x0420, 0x00D8, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA02__M4_TRACE_2                        = IOMUX_PAD(0x0420, 0x00D8, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA02__KITTEN_TRACE_2                    = IOMUX_PAD(0x0420, 0x00D8, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA02__CSI1_DATA_22                      = IOMUX_PAD(0x0420, 0x00D8, 4, 0x06F4, 0, 0),
+	 MX6_PAD_LCD1_DATA02__GPIO3_IO_3                        = IOMUX_PAD(0x0420, 0x00D8, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA02__SRC_BT_CFG_2                      = IOMUX_PAD(0x0420, 0x00D8, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA02__SIM_M_HADDR_23                    = IOMUX_PAD(0x0420, 0x00D8, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA02__VADC_TEST_7                       = IOMUX_PAD(0x0420, 0x00D8, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA02__MMDC_DEBUG_7                      = IOMUX_PAD(0x0420, 0x00D8, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA03__LCDIF1_DATA_3                     = IOMUX_PAD(0x0424, 0x00DC, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA03__WEIM_ADDR_24                      = IOMUX_PAD(0x0424, 0x00DC, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA03__M4_TRACE_3                        = IOMUX_PAD(0x0424, 0x00DC, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA03__KITTEN_TRACE_3                    = IOMUX_PAD(0x0424, 0x00DC, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA03__CSI1_DATA_23                      = IOMUX_PAD(0x0424, 0x00DC, 4, 0x06F8, 0, 0),
+	 MX6_PAD_LCD1_DATA03__GPIO3_IO_4                        = IOMUX_PAD(0x0424, 0x00DC, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA03__SRC_BT_CFG_3                      = IOMUX_PAD(0x0424, 0x00DC, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA03__SIM_M_HADDR_24                    = IOMUX_PAD(0x0424, 0x00DC, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA03__VADC_TEST_8                       = IOMUX_PAD(0x0424, 0x00DC, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA03__MMDC_DEBUG_8                      = IOMUX_PAD(0x0424, 0x00DC, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA04__LCDIF1_DATA_4                     = IOMUX_PAD(0x0428, 0x00E0, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA04__WEIM_ADDR_25                      = IOMUX_PAD(0x0428, 0x00E0, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA04__KITTEN_TRACE_4                    = IOMUX_PAD(0x0428, 0x00E0, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA04__CSI1_VSYNC                        = IOMUX_PAD(0x0428, 0x00E0, 4, 0x0708, 1, 0),
+	 MX6_PAD_LCD1_DATA04__GPIO3_IO_5                        = IOMUX_PAD(0x0428, 0x00E0, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA04__SRC_BT_CFG_4                      = IOMUX_PAD(0x0428, 0x00E0, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA04__SIM_M_HADDR_25                    = IOMUX_PAD(0x0428, 0x00E0, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA04__VADC_TEST_9                       = IOMUX_PAD(0x0428, 0x00E0, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA04__MMDC_DEBUG_9                      = IOMUX_PAD(0x0428, 0x00E0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA05__LCDIF1_DATA_5                     = IOMUX_PAD(0x042C, 0x00E4, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA05__WEIM_ADDR_26                      = IOMUX_PAD(0x042C, 0x00E4, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA05__KITTEN_TRACE_5                    = IOMUX_PAD(0x042C, 0x00E4, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA05__CSI1_HSYNC                        = IOMUX_PAD(0x042C, 0x00E4, 4, 0x0700, 1, 0),
+	 MX6_PAD_LCD1_DATA05__GPIO3_IO_6                        = IOMUX_PAD(0x042C, 0x00E4, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA05__SRC_BT_CFG_5                      = IOMUX_PAD(0x042C, 0x00E4, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA05__SIM_M_HADDR_26                    = IOMUX_PAD(0x042C, 0x00E4, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA05__VADC_TEST_10                      = IOMUX_PAD(0x042C, 0x00E4, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA05__MMDC_DEBUG_10                     = IOMUX_PAD(0x042C, 0x00E4, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA06__LCDIF1_DATA_6                     = IOMUX_PAD(0x0430, 0x00E8, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA06__WEIM_EB_B_2                       = IOMUX_PAD(0x0430, 0x00E8, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA06__KITTEN_TRACE_6                    = IOMUX_PAD(0x0430, 0x00E8, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA06__CSI1_PIXCLK                       = IOMUX_PAD(0x0430, 0x00E8, 4, 0x0704, 1, 0),
+	 MX6_PAD_LCD1_DATA06__GPIO3_IO_7                        = IOMUX_PAD(0x0430, 0x00E8, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA06__SRC_BT_CFG_6                      = IOMUX_PAD(0x0430, 0x00E8, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA06__SIM_M_HADDR_27                    = IOMUX_PAD(0x0430, 0x00E8, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA06__VADC_TEST_11                      = IOMUX_PAD(0x0430, 0x00E8, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA06__MMDC_DEBUG_11                     = IOMUX_PAD(0x0430, 0x00E8, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA07__LCDIF1_DATA_7                     = IOMUX_PAD(0x0434, 0x00EC, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA07__WEIM_EB_B_3                       = IOMUX_PAD(0x0434, 0x00EC, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA07__KITTEN_TRACE_7                    = IOMUX_PAD(0x0434, 0x00EC, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA07__CSI1_MCLK                         = IOMUX_PAD(0x0434, 0x00EC, 4, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA07__GPIO3_IO_8                        = IOMUX_PAD(0x0434, 0x00EC, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA07__SRC_BT_CFG_7                      = IOMUX_PAD(0x0434, 0x00EC, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA07__SIM_M_HADDR_28                    = IOMUX_PAD(0x0434, 0x00EC, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA07__VADC_TEST_12                      = IOMUX_PAD(0x0434, 0x00EC, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA07__MMDC_DEBUG_12                     = IOMUX_PAD(0x0434, 0x00EC, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA08__LCDIF1_DATA_8                     = IOMUX_PAD(0x0438, 0x00F0, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA08__WEIM_AD_8                         = IOMUX_PAD(0x0438, 0x00F0, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA08__KITTEN_TRACE_8                    = IOMUX_PAD(0x0438, 0x00F0, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA08__CSI1_DATA_9                       = IOMUX_PAD(0x0438, 0x00F0, 4, 0x06C4, 1, 0),
+	 MX6_PAD_LCD1_DATA08__GPIO3_IO_9                        = IOMUX_PAD(0x0438, 0x00F0, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA08__SRC_BT_CFG_8                      = IOMUX_PAD(0x0438, 0x00F0, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA08__SIM_M_HADDR_29                    = IOMUX_PAD(0x0438, 0x00F0, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA08__VADC_TEST_13                      = IOMUX_PAD(0x0438, 0x00F0, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA08__MMDC_DEBUG_13                     = IOMUX_PAD(0x0438, 0x00F0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA09__LCDIF1_DATA_9                     = IOMUX_PAD(0x043C, 0x00F4, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA09__WEIM_AD_9                         = IOMUX_PAD(0x043C, 0x00F4, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA09__KITTEN_TRACE_9                    = IOMUX_PAD(0x043C, 0x00F4, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA09__CSI1_DATA_8                       = IOMUX_PAD(0x043C, 0x00F4, 4, 0x06C0, 1, 0),
+	 MX6_PAD_LCD1_DATA09__GPIO3_IO_10                       = IOMUX_PAD(0x043C, 0x00F4, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA09__SRC_BT_CFG_9                      = IOMUX_PAD(0x043C, 0x00F4, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA09__SIM_M_HADDR_30                    = IOMUX_PAD(0x043C, 0x00F4, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA09__VADC_TEST_14                      = IOMUX_PAD(0x043C, 0x00F4, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA09__MMDC_DEBUG_14                     = IOMUX_PAD(0x043C, 0x00F4, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA10__LCDIF1_DATA_10                    = IOMUX_PAD(0x0440, 0x00F8, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA10__WEIM_AD_10                        = IOMUX_PAD(0x0440, 0x00F8, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA10__KITTEN_TRACE_10                   = IOMUX_PAD(0x0440, 0x00F8, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA10__CSI1_DATA_7                       = IOMUX_PAD(0x0440, 0x00F8, 4, 0x06BC, 1, 0),
+	 MX6_PAD_LCD1_DATA10__GPIO3_IO_11                       = IOMUX_PAD(0x0440, 0x00F8, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA10__SRC_BT_CFG_10                     = IOMUX_PAD(0x0440, 0x00F8, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA10__SIM_M_HADDR_31                    = IOMUX_PAD(0x0440, 0x00F8, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA10__VADC_TEST_15                      = IOMUX_PAD(0x0440, 0x00F8, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA10__MMDC_DEBUG_15                     = IOMUX_PAD(0x0440, 0x00F8, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA11__LCDIF1_DATA_11                    = IOMUX_PAD(0x0444, 0x00FC, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA11__WEIM_AD_11                        = IOMUX_PAD(0x0444, 0x00FC, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA11__KITTEN_TRACE_11                   = IOMUX_PAD(0x0444, 0x00FC, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA11__CSI1_DATA_6                       = IOMUX_PAD(0x0444, 0x00FC, 4, 0x06B8, 1, 0),
+	 MX6_PAD_LCD1_DATA11__GPIO3_IO_12                       = IOMUX_PAD(0x0444, 0x00FC, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA11__SRC_BT_CFG_11                     = IOMUX_PAD(0x0444, 0x00FC, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA11__SIM_M_HBURST_0                    = IOMUX_PAD(0x0444, 0x00FC, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA11__VADC_TEST_16                      = IOMUX_PAD(0x0444, 0x00FC, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA11__MMDC_DEBUG_16                     = IOMUX_PAD(0x0444, 0x00FC, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA12__LCDIF1_DATA_12                    = IOMUX_PAD(0x0448, 0x0100, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA12__WEIM_AD_12                        = IOMUX_PAD(0x0448, 0x0100, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA12__KITTEN_TRACE_12                   = IOMUX_PAD(0x0448, 0x0100, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA12__CSI1_DATA_5                       = IOMUX_PAD(0x0448, 0x0100, 4, 0x06B4, 1, 0),
+	 MX6_PAD_LCD1_DATA12__GPIO3_IO_13                       = IOMUX_PAD(0x0448, 0x0100, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA12__SRC_BT_CFG_12                     = IOMUX_PAD(0x0448, 0x0100, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA12__SIM_M_HBURST_1                    = IOMUX_PAD(0x0448, 0x0100, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA12__VADC_TEST_17                      = IOMUX_PAD(0x0448, 0x0100, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA12__MMDC_DEBUG_17                     = IOMUX_PAD(0x0448, 0x0100, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA13__LCDIF1_DATA_13                    = IOMUX_PAD(0x044C, 0x0104, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA13__WEIM_AD_13                        = IOMUX_PAD(0x044C, 0x0104, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA13__KITTEN_TRACE_13                   = IOMUX_PAD(0x044C, 0x0104, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA13__CSI1_DATA_4                       = IOMUX_PAD(0x044C, 0x0104, 4, 0x06B0, 1, 0),
+	 MX6_PAD_LCD1_DATA13__GPIO3_IO_14                       = IOMUX_PAD(0x044C, 0x0104, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA13__SRC_BT_CFG_13                     = IOMUX_PAD(0x044C, 0x0104, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA13__SIM_M_HBURST_2                    = IOMUX_PAD(0x044C, 0x0104, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA13__VADC_TEST_18                      = IOMUX_PAD(0x044C, 0x0104, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA13__MMDC_DEBUG_18                     = IOMUX_PAD(0x044C, 0x0104, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA14__LCDIF1_DATA_14                    = IOMUX_PAD(0x0450, 0x0108, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA14__WEIM_AD_14                        = IOMUX_PAD(0x0450, 0x0108, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA14__KITTEN_TRACE_14                   = IOMUX_PAD(0x0450, 0x0108, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA14__CSI1_DATA_3                       = IOMUX_PAD(0x0450, 0x0108, 4, 0x06AC, 1, 0),
+	 MX6_PAD_LCD1_DATA14__GPIO3_IO_15                       = IOMUX_PAD(0x0450, 0x0108, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA14__SRC_BT_CFG_14                     = IOMUX_PAD(0x0450, 0x0108, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                   = IOMUX_PAD(0x0450, 0x0108, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA14__VADC_TEST_19                      = IOMUX_PAD(0x0450, 0x0108, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA14__MMDC_DEBUG_19                     = IOMUX_PAD(0x0450, 0x0108, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA15__LCDIF1_DATA_15                    = IOMUX_PAD(0x0454, 0x010C, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA15__WEIM_AD_15                        = IOMUX_PAD(0x0454, 0x010C, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA15__KITTEN_TRACE_15                   = IOMUX_PAD(0x0454, 0x010C, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA15__CSI1_DATA_2                       = IOMUX_PAD(0x0454, 0x010C, 4, 0x06A8, 1, 0),
+	 MX6_PAD_LCD1_DATA15__GPIO3_IO_16                       = IOMUX_PAD(0x0454, 0x010C, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA15__SRC_BT_CFG_15                     = IOMUX_PAD(0x0454, 0x010C, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA15__SIM_M_HPROT_0                     = IOMUX_PAD(0x0454, 0x010C, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA15__VDEC_DEBUG_0                      = IOMUX_PAD(0x0454, 0x010C, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA15__MMDC_DEBUG_20                     = IOMUX_PAD(0x0454, 0x010C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA16__LCDIF1_DATA_16                    = IOMUX_PAD(0x0458, 0x0110, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA16__WEIM_ADDR_16                      = IOMUX_PAD(0x0458, 0x0110, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA16__M4_TRACE_CLK                      = IOMUX_PAD(0x0458, 0x0110, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                  = IOMUX_PAD(0x0458, 0x0110, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA16__CSI1_DATA_1                       = IOMUX_PAD(0x0458, 0x0110, 4, 0x06A4, 0, 0),
+	 MX6_PAD_LCD1_DATA16__GPIO3_IO_17                       = IOMUX_PAD(0x0458, 0x0110, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA16__SRC_BT_CFG_24                     = IOMUX_PAD(0x0458, 0x0110, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA16__SIM_M_HPROT_1                     = IOMUX_PAD(0x0458, 0x0110, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA16__VDEC_DEBUG_1                      = IOMUX_PAD(0x0458, 0x0110, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA16__MMDC_DEBUG_21                     = IOMUX_PAD(0x0458, 0x0110, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA17__LCDIF1_DATA_17                    = IOMUX_PAD(0x045C, 0x0114, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA17__WEIM_ADDR_17                      = IOMUX_PAD(0x045C, 0x0114, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                  = IOMUX_PAD(0x045C, 0x0114, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA17__CSI1_DATA_0                       = IOMUX_PAD(0x045C, 0x0114, 4, 0x06A0, 0, 0),
+	 MX6_PAD_LCD1_DATA17__GPIO3_IO_18                       = IOMUX_PAD(0x045C, 0x0114, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA17__SRC_BT_CFG_25                     = IOMUX_PAD(0x045C, 0x0114, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA17__SIM_M_HPROT_2                     = IOMUX_PAD(0x045C, 0x0114, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA17__VDEC_DEBUG_2                      = IOMUX_PAD(0x045C, 0x0114, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA17__MMDC_DEBUG_22                     = IOMUX_PAD(0x045C, 0x0114, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA18__LCDIF1_DATA_18                    = IOMUX_PAD(0x0460, 0x0118, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA18__WEIM_ADDR_18                      = IOMUX_PAD(0x0460, 0x0118, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA18__M4_EVENTO                         = IOMUX_PAD(0x0460, 0x0118, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA18__KITTEN_EVENTO                     = IOMUX_PAD(0x0460, 0x0118, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA18__CSI1_DATA_15                      = IOMUX_PAD(0x0460, 0x0118, 4, 0x06D8, 0, 0),
+	 MX6_PAD_LCD1_DATA18__GPIO3_IO_19                       = IOMUX_PAD(0x0460, 0x0118, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA18__SRC_BT_CFG_26                     = IOMUX_PAD(0x0460, 0x0118, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA18__SIM_M_HPROT_3                     = IOMUX_PAD(0x0460, 0x0118, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA18__VDEC_DEBUG_3                      = IOMUX_PAD(0x0460, 0x0118, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA18__MMDC_DEBUG_23                     = IOMUX_PAD(0x0460, 0x0118, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA19__LCDIF1_DATA_19                    = IOMUX_PAD(0x0464, 0x011C, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA19__WEIM_ADDR_19                      = IOMUX_PAD(0x0464, 0x011C, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA19__M4_TRACE_SWO                      = IOMUX_PAD(0x0464, 0x011C, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA19__CSI1_DATA_14                      = IOMUX_PAD(0x0464, 0x011C, 4, 0x06D4, 0, 0),
+	 MX6_PAD_LCD1_DATA19__GPIO3_IO_20                       = IOMUX_PAD(0x0464, 0x011C, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA19__SRC_BT_CFG_27                     = IOMUX_PAD(0x0464, 0x011C, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA19__SIM_M_HREADYOUT                   = IOMUX_PAD(0x0464, 0x011C, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA19__VDEC_DEBUG_4                      = IOMUX_PAD(0x0464, 0x011C, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA19__MMDC_DEBUG_24                     = IOMUX_PAD(0x0464, 0x011C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA20__LCDIF1_DATA_20                    = IOMUX_PAD(0x0468, 0x0120, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA20__WEIM_ADDR_20                      = IOMUX_PAD(0x0468, 0x0120, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA20__PWM8_OUT                          = IOMUX_PAD(0x0468, 0x0120, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT             = IOMUX_PAD(0x0468, 0x0120, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA20__CSI1_DATA_13                      = IOMUX_PAD(0x0468, 0x0120, 4, 0x06D0, 0, 0),
+	 MX6_PAD_LCD1_DATA20__GPIO3_IO_21                       = IOMUX_PAD(0x0468, 0x0120, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA20__SRC_BT_CFG_28                     = IOMUX_PAD(0x0468, 0x0120, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA20__SIM_M_HRESP                       = IOMUX_PAD(0x0468, 0x0120, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA20__VDEC_DEBUG_5                      = IOMUX_PAD(0x0468, 0x0120, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA20__MMDC_DEBUG_25                     = IOMUX_PAD(0x0468, 0x0120, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA21__LCDIF1_DATA_21                    = IOMUX_PAD(0x046C, 0x0124, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA21__WEIM_ADDR_21                      = IOMUX_PAD(0x046C, 0x0124, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA21__PWM7_OUT                          = IOMUX_PAD(0x046C, 0x0124, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT             = IOMUX_PAD(0x046C, 0x0124, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA21__CSI1_DATA_12                      = IOMUX_PAD(0x046C, 0x0124, 4, 0x06CC, 0, 0),
+	 MX6_PAD_LCD1_DATA21__GPIO3_IO_22                       = IOMUX_PAD(0x046C, 0x0124, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA21__SRC_BT_CFG_29                     = IOMUX_PAD(0x046C, 0x0124, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA21__SIM_M_HSIZE_0                     = IOMUX_PAD(0x046C, 0x0124, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA21__VDEC_DEBUG_6                      = IOMUX_PAD(0x046C, 0x0124, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA21__MMDC_DEBUG_26                     = IOMUX_PAD(0x046C, 0x0124, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA22__LCDIF1_DATA_22                    = IOMUX_PAD(0x0470, 0x0128, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA22__WEIM_ADDR_22                      = IOMUX_PAD(0x0470, 0x0128, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA22__PWM6_OUT                          = IOMUX_PAD(0x0470, 0x0128, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT             = IOMUX_PAD(0x0470, 0x0128, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA22__CSI1_DATA_11                      = IOMUX_PAD(0x0470, 0x0128, 4, 0x06C8, 0, 0),
+	 MX6_PAD_LCD1_DATA22__GPIO3_IO_23                       = IOMUX_PAD(0x0470, 0x0128, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA22__SRC_BT_CFG_30                     = IOMUX_PAD(0x0470, 0x0128, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA22__SIM_M_HSIZE_1                     = IOMUX_PAD(0x0470, 0x0128, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA22__VDEC_DEBUG_7                      = IOMUX_PAD(0x0470, 0x0128, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA22__MMDC_DEBUG_27                     = IOMUX_PAD(0x0470, 0x0128, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_DATA23__LCDIF1_DATA_23                    = IOMUX_PAD(0x0474, 0x012C, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA23__WEIM_ADDR_23                      = IOMUX_PAD(0x0474, 0x012C, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA23__PWM5_OUT                          = IOMUX_PAD(0x0474, 0x012C, 2, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT             = IOMUX_PAD(0x0474, 0x012C, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA23__CSI1_DATA_10                      = IOMUX_PAD(0x0474, 0x012C, 4, 0x06FC, 0, 0),
+	 MX6_PAD_LCD1_DATA23__GPIO3_IO_24                       = IOMUX_PAD(0x0474, 0x012C, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA23__SRC_BT_CFG_31                     = IOMUX_PAD(0x0474, 0x012C, 6, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA23__SIM_M_HSIZE_2                     = IOMUX_PAD(0x0474, 0x012C, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA23__VDEC_DEBUG_8                      = IOMUX_PAD(0x0474, 0x012C, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_DATA23__MMDC_DEBUG_28                     = IOMUX_PAD(0x0474, 0x012C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_ENABLE__LCDIF1_ENABLE                     = IOMUX_PAD(0x0478, 0x0130, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_ENABLE__LCDIF1_RD_E                       = IOMUX_PAD(0x0478, 0x0130, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                   = IOMUX_PAD(0x0478, 0x0130, 2, 0x063C, 1, 0),
+	 MX6_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN              = IOMUX_PAD(0x0478, 0x0130, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_ENABLE__CSI1_DATA_17                      = IOMUX_PAD(0x0478, 0x0130, 4, 0x06E0, 0, 0),
+	 MX6_PAD_LCD1_ENABLE__GPIO3_IO_25                       = IOMUX_PAD(0x0478, 0x0130, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_ENABLE__USDHC1_CD_B                       = IOMUX_PAD(0x0478, 0x0130, 6, 0x0864, 0, 0),
+	 MX6_PAD_LCD1_ENABLE__SIM_M_HADDR_17                    = IOMUX_PAD(0x0478, 0x0130, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_ENABLE__VADC_TEST_1                       = IOMUX_PAD(0x0478, 0x0130, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_ENABLE__MMDC_DEBUG_1                      = IOMUX_PAD(0x0478, 0x0130, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_HSYNC__LCDIF1_HSYNC                       = IOMUX_PAD(0x047C, 0x0134, 0, 0x07E0, 0, 0),
+	 MX6_PAD_LCD1_HSYNC__LCDIF1_RS                          = IOMUX_PAD(0x047C, 0x0134, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                    = IOMUX_PAD(0x047C, 0x0134, 2, 0x0630, 1, 0),
+	 MX6_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN               = IOMUX_PAD(0x047C, 0x0134, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_HSYNC__CSI1_DATA_18                       = IOMUX_PAD(0x047C, 0x0134, 4, 0x06E4, 0, 0),
+	 MX6_PAD_LCD1_HSYNC__GPIO3_IO_26                        = IOMUX_PAD(0x047C, 0x0134, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_HSYNC__USDHC2_WP                          = IOMUX_PAD(0x047C, 0x0134, 6, 0x0870, 0, 0),
+	 MX6_PAD_LCD1_HSYNC__SIM_M_HADDR_18                     = IOMUX_PAD(0x047C, 0x0134, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_HSYNC__VADC_TEST_2                        = IOMUX_PAD(0x047C, 0x0134, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_HSYNC__MMDC_DEBUG_2                       = IOMUX_PAD(0x047C, 0x0134, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_RESET__LCDIF1_RESET                       = IOMUX_PAD(0x0480, 0x0138, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_RESET__LCDIF1_CS                          = IOMUX_PAD(0x0480, 0x0138, 1, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                    = IOMUX_PAD(0x0480, 0x0138, 2, 0x062C, 1, 0),
+	 MX6_PAD_LCD1_RESET__KITTEN_EVENTI                      = IOMUX_PAD(0x0480, 0x0138, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_RESET__M4_EVENTI                          = IOMUX_PAD(0x0480, 0x0138, 4, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_RESET__GPIO3_IO_27                        = IOMUX_PAD(0x0480, 0x0138, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_RESET__CCM_PMIC_RDY                       = IOMUX_PAD(0x0480, 0x0138, 6, 0x069C, 0, 0),
+	 MX6_PAD_LCD1_RESET__SIM_M_HADDR_20                     = IOMUX_PAD(0x0480, 0x0138, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_RESET__VADC_TEST_4                        = IOMUX_PAD(0x0480, 0x0138, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_RESET__MMDC_DEBUG_4                       = IOMUX_PAD(0x0480, 0x0138, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_LCD1_VSYNC__LCDIF1_VSYNC                       = IOMUX_PAD(0x0484, 0x013C, 0, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_VSYNC__LCDIF1_BUSY                        = IOMUX_PAD(0x0484, 0x013C, 1, 0x07E0, 1, 0),
+	 MX6_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                   = IOMUX_PAD(0x0484, 0x013C, 2, 0x0640, 1, 0),
+	 MX6_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN               = IOMUX_PAD(0x0484, 0x013C, 3, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_VSYNC__CSI1_DATA_19                       = IOMUX_PAD(0x0484, 0x013C, 4, 0x06E8, 0, 0),
+	 MX6_PAD_LCD1_VSYNC__GPIO3_IO_28                        = IOMUX_PAD(0x0484, 0x013C, 5, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_VSYNC__USDHC2_CD_B                        = IOMUX_PAD(0x0484, 0x013C, 6, 0x086C, 0, 0),
+	 MX6_PAD_LCD1_VSYNC__SIM_M_HADDR_19                     = IOMUX_PAD(0x0484, 0x013C, 7, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_VSYNC__VADC_TEST_3                        = IOMUX_PAD(0x0484, 0x013C, 8, 0x0000, 0, 0),
+	 MX6_PAD_LCD1_VSYNC__MMDC_DEBUG_3                       = IOMUX_PAD(0x0484, 0x013C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_ALE__RAWNAND_ALE                          = IOMUX_PAD(0x0488, 0x0140, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_ALE__I2C3_SDA                             = IOMUX_PAD(0x0488, 0x0140, IOMUX_CONFIG_SION | 1, 0x07BC, 0, 0),
+	 MX6_PAD_NAND_ALE__QSPI2_A_SS0_B                        = IOMUX_PAD(0x0488, 0x0140, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_ALE__ECSPI2_SS0                           = IOMUX_PAD(0x0488, 0x0140, 3, 0x072C, 0, 0),
+	 MX6_PAD_NAND_ALE__ESAI_TX3_RX2                         = IOMUX_PAD(0x0488, 0x0140, 4, 0x079C, 0, 0),
+	 MX6_PAD_NAND_ALE__GPIO4_IO_0                           = IOMUX_PAD(0x0488, 0x0140, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_ALE__WEIM_CS0_B                           = IOMUX_PAD(0x0488, 0x0140, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_ALE__TPSMP_HDATA_0                        = IOMUX_PAD(0x0488, 0x0140, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN            = IOMUX_PAD(0x0488, 0x0140, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_ALE__SDMA_DEBUG_PC_12                     = IOMUX_PAD(0x0488, 0x0140, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B                      = IOMUX_PAD(0x048C, 0x0144, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE0_B__USDHC2_VSELECT                     = IOMUX_PAD(0x048C, 0x0144, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE0_B__QSPI2_A_DATA_2                     = IOMUX_PAD(0x048C, 0x0144, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                    = IOMUX_PAD(0x048C, 0x0144, 3, 0x0654, 0, 0),
+	 MX6_PAD_NAND_CE0_B__ESAI_TX_CLK                        = IOMUX_PAD(0x048C, 0x0144, 4, 0x078C, 0, 0),
+	 MX6_PAD_NAND_CE0_B__GPIO4_IO_1                         = IOMUX_PAD(0x048C, 0x0144, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE0_B__WEIM_LBA_B                         = IOMUX_PAD(0x048C, 0x0144, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE0_B__TPSMP_HDATA_3                      = IOMUX_PAD(0x048C, 0x0144, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ         = IOMUX_PAD(0x048C, 0x0144, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                    = IOMUX_PAD(0x048C, 0x0144, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_CE1_B__RAWNAND_CE1_B                      = IOMUX_PAD(0x0490, 0x0148, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE1_B__USDHC3_RESET_B                     = IOMUX_PAD(0x0490, 0x0148, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE1_B__QSPI2_A_DATA_3                     = IOMUX_PAD(0x0490, 0x0148, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                    = IOMUX_PAD(0x0490, 0x0148, 3, 0x0648, 0, 0),
+	 MX6_PAD_NAND_CE1_B__ESAI_TX0                           = IOMUX_PAD(0x0490, 0x0148, 4, 0x0790, 0, 0),
+	 MX6_PAD_NAND_CE1_B__GPIO4_IO_2                         = IOMUX_PAD(0x0490, 0x0148, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE1_B__WEIM_OE                            = IOMUX_PAD(0x0490, 0x0148, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE1_B__TPSMP_HDATA_4                      = IOMUX_PAD(0x0490, 0x0148, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE     = IOMUX_PAD(0x0490, 0x0148, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                    = IOMUX_PAD(0x0490, 0x0148, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_CLE__RAWNAND_CLE                          = IOMUX_PAD(0x0494, 0x014C, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CLE__I2C3_SCL                             = IOMUX_PAD(0x0494, 0x014C, IOMUX_CONFIG_SION | 1, 0x07B8, 0, 0),
+	 MX6_PAD_NAND_CLE__QSPI2_A_SCLK                         = IOMUX_PAD(0x0494, 0x014C, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CLE__ECSPI2_SCLK                          = IOMUX_PAD(0x0494, 0x014C, 3, 0x0720, 0, 0),
+	 MX6_PAD_NAND_CLE__ESAI_TX2_RX3                         = IOMUX_PAD(0x0494, 0x014C, 4, 0x0798, 0, 0),
+	 MX6_PAD_NAND_CLE__GPIO4_IO_3                           = IOMUX_PAD(0x0494, 0x014C, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CLE__WEIM_BCLK                            = IOMUX_PAD(0x0494, 0x014C, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CLE__TPSMP_CLK                            = IOMUX_PAD(0x0494, 0x014C, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP            = IOMUX_PAD(0x0494, 0x014C, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_CLE__SDMA_DEBUG_PC_13                     = IOMUX_PAD(0x0494, 0x014C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_DATA00__RAWNAND_DATA00                    = IOMUX_PAD(0x0498, 0x0150, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA00__USDHC1_DATA4                      = IOMUX_PAD(0x0498, 0x0150, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA00__QSPI2_B_DATA_1                    = IOMUX_PAD(0x0498, 0x0150, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA00__ECSPI5_MISO                       = IOMUX_PAD(0x0498, 0x0150, 3, 0x0754, 0, 0),
+	 MX6_PAD_NAND_DATA00__ESAI_RX_CLK                       = IOMUX_PAD(0x0498, 0x0150, 4, 0x0788, 0, 0),
+	 MX6_PAD_NAND_DATA00__GPIO4_IO_4                        = IOMUX_PAD(0x0498, 0x0150, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA00__WEIM_AD_0                         = IOMUX_PAD(0x0498, 0x0150, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA00__TPSMP_HDATA_7                     = IOMUX_PAD(0x0498, 0x0150, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET = IOMUX_PAD(0x0498, 0x0150, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5        = IOMUX_PAD(0x0498, 0x0150, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_DATA01__RAWNAND_DATA01                    = IOMUX_PAD(0x049C, 0x0154, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA01__USDHC1_DATA5                      = IOMUX_PAD(0x049C, 0x0154, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA01__QSPI2_B_DATA_0                    = IOMUX_PAD(0x049C, 0x0154, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA01__ECSPI5_MOSI                       = IOMUX_PAD(0x049C, 0x0154, 3, 0x0758, 0, 0),
+	 MX6_PAD_NAND_DATA01__ESAI_RX_FS                        = IOMUX_PAD(0x049C, 0x0154, 4, 0x0778, 0, 0),
+	 MX6_PAD_NAND_DATA01__GPIO4_IO_5                        = IOMUX_PAD(0x049C, 0x0154, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA01__WEIM_AD_1                         = IOMUX_PAD(0x049C, 0x0154, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA01__TPSMP_HDATA_8                     = IOMUX_PAD(0x049C, 0x0154, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD     = IOMUX_PAD(0x049C, 0x0154, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4        = IOMUX_PAD(0x049C, 0x0154, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_DATA02__RAWNAND_DATA02                    = IOMUX_PAD(0x04A0, 0x0158, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA02__USDHC1_DATA6                      = IOMUX_PAD(0x04A0, 0x0158, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA02__QSPI2_B_SCLK                      = IOMUX_PAD(0x04A0, 0x0158, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA02__ECSPI5_SCLK                       = IOMUX_PAD(0x04A0, 0x0158, 3, 0x0750, 0, 0),
+	 MX6_PAD_NAND_DATA02__ESAI_TX_HF_CLK                    = IOMUX_PAD(0x04A0, 0x0158, 4, 0x0784, 0, 0),
+	 MX6_PAD_NAND_DATA02__GPIO4_IO_6                        = IOMUX_PAD(0x04A0, 0x0158, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA02__WEIM_AD_2                         = IOMUX_PAD(0x04A0, 0x0158, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA02__TPSMP_HDATA_9                     = IOMUX_PAD(0x04A0, 0x0158, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV  = IOMUX_PAD(0x04A0, 0x0158, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3        = IOMUX_PAD(0x04A0, 0x0158, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_DATA03__RAWNAND_DATA03                    = IOMUX_PAD(0x04A4, 0x015C, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA03__USDHC1_DATA7                      = IOMUX_PAD(0x04A4, 0x015C, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA03__QSPI2_B_SS0_B                     = IOMUX_PAD(0x04A4, 0x015C, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA03__ECSPI5_SS0                        = IOMUX_PAD(0x04A4, 0x015C, 3, 0x075C, 0, 0),
+	 MX6_PAD_NAND_DATA03__ESAI_RX_HF_CLK                    = IOMUX_PAD(0x04A4, 0x015C, 4, 0x0780, 0, 0),
+	 MX6_PAD_NAND_DATA03__GPIO4_IO_7                        = IOMUX_PAD(0x04A4, 0x015C, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA03__WEIM_AD_3                         = IOMUX_PAD(0x04A4, 0x015C, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA03__TPSMP_HDATA_10                    = IOMUX_PAD(0x04A4, 0x015C, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH    = IOMUX_PAD(0x04A4, 0x015C, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6        = IOMUX_PAD(0x04A4, 0x015C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_DATA04__RAWNAND_DATA04                    = IOMUX_PAD(0x04A8, 0x0160, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA04__USDHC2_DATA4                      = IOMUX_PAD(0x04A8, 0x0160, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA04__QSPI2_B_SS1_B                     = IOMUX_PAD(0x04A8, 0x0160, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA04__UART3_RTS_B                       = IOMUX_PAD(0x04A8, 0x0160, 3, 0x083C, 0, 0),
+	 MX6_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                  = IOMUX_PAD(0x04A8, 0x0160, 4, 0x0650, 0, 0),
+	 MX6_PAD_NAND_DATA04__GPIO4_IO_8                        = IOMUX_PAD(0x04A8, 0x0160, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA04__WEIM_AD_4                         = IOMUX_PAD(0x04A8, 0x0160, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA04__TPSMP_HDATA_11                    = IOMUX_PAD(0x04A8, 0x0160, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH    = IOMUX_PAD(0x04A8, 0x0160, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0           = IOMUX_PAD(0x04A8, 0x0160, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_DATA05__RAWNAND_DATA05                    = IOMUX_PAD(0x04AC, 0x0164, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA05__USDHC2_DATA5                      = IOMUX_PAD(0x04AC, 0x0164, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA05__QSPI2_B_DQS                       = IOMUX_PAD(0x04AC, 0x0164, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA05__UART3_CTS_B                       = IOMUX_PAD(0x04AC, 0x0164, 3, 0x083C, 1, 0),
+	 MX6_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                   = IOMUX_PAD(0x04AC, 0x0164, 4, 0x064C, 0, 0),
+	 MX6_PAD_NAND_DATA05__GPIO4_IO_9                        = IOMUX_PAD(0x04AC, 0x0164, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA05__WEIM_AD_5                         = IOMUX_PAD(0x04AC, 0x0164, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA05__TPSMP_HDATA_12                    = IOMUX_PAD(0x04AC, 0x0164, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET = IOMUX_PAD(0x04AC, 0x0164, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1           = IOMUX_PAD(0x04AC, 0x0164, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_DATA06__RAWNAND_DATA06                    = IOMUX_PAD(0x04B0, 0x0168, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA06__USDHC2_DATA6                      = IOMUX_PAD(0x04B0, 0x0168, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA06__QSPI2_A_SS1_B                     = IOMUX_PAD(0x04B0, 0x0168, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA06__UART3_RX                          = IOMUX_PAD(0x04B0, 0x0168, 3, 0x0840, 0, 0),
+	 MX6_PAD_NAND_DATA06__PWM3_OUT                          = IOMUX_PAD(0x04B0, 0x0168, 4, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA06__GPIO4_IO_10                       = IOMUX_PAD(0x04B0, 0x0168, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA06__WEIM_AD_6                         = IOMUX_PAD(0x04B0, 0x0168, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA06__TPSMP_HDATA_13                    = IOMUX_PAD(0x04B0, 0x0168, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD     = IOMUX_PAD(0x04B0, 0x0168, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2           = IOMUX_PAD(0x04B0, 0x0168, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_DATA07__RAWNAND_DATA07                    = IOMUX_PAD(0x04B4, 0x016C, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA07__USDHC2_DATA7                      = IOMUX_PAD(0x04B4, 0x016C, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA07__QSPI2_A_DQS                       = IOMUX_PAD(0x04B4, 0x016C, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA07__UART3_TX                          = IOMUX_PAD(0x04B4, 0x016C, 3, 0x0840, 1, 0),
+	 MX6_PAD_NAND_DATA07__PWM4_OUT                          = IOMUX_PAD(0x04B4, 0x016C, 4, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA07__GPIO4_IO_11                       = IOMUX_PAD(0x04B4, 0x016C, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA07__WEIM_AD_7                         = IOMUX_PAD(0x04B4, 0x016C, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA07__TPSMP_HDATA_14                    = IOMUX_PAD(0x04B4, 0x016C, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD     = IOMUX_PAD(0x04B4, 0x016C, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3           = IOMUX_PAD(0x04B4, 0x016C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_RE_B__RAWNAND_RE_B                        = IOMUX_PAD(0x04B8, 0x0170, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_RE_B__USDHC2_RESET_B                      = IOMUX_PAD(0x04B8, 0x0170, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_RE_B__QSPI2_B_DATA_3                      = IOMUX_PAD(0x04B8, 0x0170, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                    = IOMUX_PAD(0x04B8, 0x0170, 3, 0x0658, 0, 0),
+	 MX6_PAD_NAND_RE_B__ESAI_TX_FS                          = IOMUX_PAD(0x04B8, 0x0170, 4, 0x077C, 0, 0),
+	 MX6_PAD_NAND_RE_B__GPIO4_IO_12                         = IOMUX_PAD(0x04B8, 0x0170, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_RE_B__WEIM_RW                             = IOMUX_PAD(0x04B8, 0x0170, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_RE_B__TPSMP_HDATA_5                       = IOMUX_PAD(0x04B8, 0x0170, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD       = IOMUX_PAD(0x04B8, 0x0170, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                     = IOMUX_PAD(0x04B8, 0x0170, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_READY_B__RAWNAND_READY_B                  = IOMUX_PAD(0x04BC, 0x0174, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_READY_B__USDHC1_VSELECT                   = IOMUX_PAD(0x04BC, 0x0174, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_READY_B__QSPI2_A_DATA_1                   = IOMUX_PAD(0x04BC, 0x0174, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_READY_B__ECSPI2_MISO                      = IOMUX_PAD(0x04BC, 0x0174, 3, 0x0724, 0, 0),
+	 MX6_PAD_NAND_READY_B__ESAI_TX1                         = IOMUX_PAD(0x04BC, 0x0174, 4, 0x0794, 0, 0),
+	 MX6_PAD_NAND_READY_B__GPIO4_IO_13                      = IOMUX_PAD(0x04BC, 0x0174, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_READY_B__WEIM_EB_B_1                      = IOMUX_PAD(0x04BC, 0x0174, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_READY_B__TPSMP_HDATA_2                    = IOMUX_PAD(0x04BC, 0x0174, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN        = IOMUX_PAD(0x04BC, 0x0174, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                 = IOMUX_PAD(0x04BC, 0x0174, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_WE_B__RAWNAND_WE_B                        = IOMUX_PAD(0x04C0, 0x0178, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WE_B__USDHC4_VSELECT                      = IOMUX_PAD(0x04C0, 0x0178, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WE_B__QSPI2_B_DATA_2                      = IOMUX_PAD(0x04C0, 0x0178, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                     = IOMUX_PAD(0x04C0, 0x0178, 3, 0x0644, 0, 0),
+	 MX6_PAD_NAND_WE_B__ESAI_TX5_RX0                        = IOMUX_PAD(0x04C0, 0x0178, 4, 0x07A4, 0, 0),
+	 MX6_PAD_NAND_WE_B__GPIO4_IO_14                         = IOMUX_PAD(0x04C0, 0x0178, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WE_B__WEIM_WAIT                           = IOMUX_PAD(0x04C0, 0x0178, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WE_B__TPSMP_HDATA_6                       = IOMUX_PAD(0x04C0, 0x0178, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV    = IOMUX_PAD(0x04C0, 0x0178, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                     = IOMUX_PAD(0x04C0, 0x0178, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_NAND_WP_B__RAWNAND_WP_B                        = IOMUX_PAD(0x04C4, 0x017C, 0, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WP_B__USDHC1_RESET_B                      = IOMUX_PAD(0x04C4, 0x017C, 1, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WP_B__QSPI2_A_DATA_0                      = IOMUX_PAD(0x04C4, 0x017C, 2, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WP_B__ECSPI2_MOSI                         = IOMUX_PAD(0x04C4, 0x017C, 3, 0x0728, 0, 0),
+	 MX6_PAD_NAND_WP_B__ESAI_TX4_RX1                        = IOMUX_PAD(0x04C4, 0x017C, 4, 0x07A0, 0, 0),
+	 MX6_PAD_NAND_WP_B__GPIO4_IO_15                         = IOMUX_PAD(0x04C4, 0x017C, 5, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WP_B__WEIM_EB_B_0                         = IOMUX_PAD(0x04C4, 0x017C, 6, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WP_B__TPSMP_HDATA_1                       = IOMUX_PAD(0x04C4, 0x017C, 7, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE      = IOMUX_PAD(0x04C4, 0x017C, 8, 0x0000, 0, 0),
+	 MX6_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                    = IOMUX_PAD(0x04C4, 0x017C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                   = IOMUX_PAD(0x04C8, 0x0180, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA0__USB_OTG2_OC                      = IOMUX_PAD(0x04C8, 0x0180, 1, 0x085C, 2, 0),
+	 MX6_PAD_QSPI1A_DATA0__ECSPI1_MOSI                      = IOMUX_PAD(0x04C8, 0x0180, 2, 0x0718, 1, 0),
+	 MX6_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                     = IOMUX_PAD(0x04C8, 0x0180, 3, 0x07A0, 2, 0),
+	 MX6_PAD_QSPI1A_DATA0__CSI1_DATA_14                     = IOMUX_PAD(0x04C8, 0x0180, 4, 0x06D4, 1, 0),
+	 MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16                      = IOMUX_PAD(0x04C8, 0x0180, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA0__WEIM_DATA_6                      = IOMUX_PAD(0x04C8, 0x0180, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                    = IOMUX_PAD(0x04C8, 0x0180, 7, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3          = IOMUX_PAD(0x04C8, 0x0180, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                   = IOMUX_PAD(0x04CC, 0x0184, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                   = IOMUX_PAD(0x04CC, 0x0184, 1, 0x0624, 2, 0),
+	 MX6_PAD_QSPI1A_DATA1__ECSPI1_MISO                      = IOMUX_PAD(0x04CC, 0x0184, 2, 0x0714, 1, 0),
+	 MX6_PAD_QSPI1A_DATA1__ESAI_TX1                         = IOMUX_PAD(0x04CC, 0x0184, 3, 0x0794, 2, 0),
+	 MX6_PAD_QSPI1A_DATA1__CSI1_DATA_13                     = IOMUX_PAD(0x04CC, 0x0184, 4, 0x06D0, 1, 0),
+	 MX6_PAD_QSPI1A_DATA1__GPIO4_IO_17                      = IOMUX_PAD(0x04CC, 0x0184, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA1__WEIM_DATA_5                      = IOMUX_PAD(0x04CC, 0x0184, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                    = IOMUX_PAD(0x04CC, 0x0184, 7, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                  = IOMUX_PAD(0x04CC, 0x0184, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                   = IOMUX_PAD(0x04D0, 0x0188, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA2__USB_OTG1_PWR                     = IOMUX_PAD(0x04D0, 0x0188, 1, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA2__ECSPI5_SS1                       = IOMUX_PAD(0x04D0, 0x0188, 2, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA2__ESAI_TX_CLK                      = IOMUX_PAD(0x04D0, 0x0188, 3, 0x078C, 2, 0),
+	 MX6_PAD_QSPI1A_DATA2__CSI1_DATA_12                     = IOMUX_PAD(0x04D0, 0x0188, 4, 0x06CC, 1, 0),
+	 MX6_PAD_QSPI1A_DATA2__GPIO4_IO_18                      = IOMUX_PAD(0x04D0, 0x0188, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA2__WEIM_DATA_4                      = IOMUX_PAD(0x04D0, 0x0188, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                    = IOMUX_PAD(0x04D0, 0x0188, 7, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                  = IOMUX_PAD(0x04D0, 0x0188, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                   = IOMUX_PAD(0x04D4, 0x018C, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA3__USB_OTG1_OC                      = IOMUX_PAD(0x04D4, 0x018C, 1, 0x0860, 2, 0),
+	 MX6_PAD_QSPI1A_DATA3__ECSPI5_SS2                       = IOMUX_PAD(0x04D4, 0x018C, 2, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA3__ESAI_TX0                         = IOMUX_PAD(0x04D4, 0x018C, 3, 0x0790, 2, 0),
+	 MX6_PAD_QSPI1A_DATA3__CSI1_DATA_11                     = IOMUX_PAD(0x04D4, 0x018C, 4, 0x06C8, 1, 0),
+	 MX6_PAD_QSPI1A_DATA3__GPIO4_IO_19                      = IOMUX_PAD(0x04D4, 0x018C, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA3__WEIM_DATA_3                      = IOMUX_PAD(0x04D4, 0x018C, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                    = IOMUX_PAD(0x04D4, 0x018C, 7, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                  = IOMUX_PAD(0x04D4, 0x018C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1A_DQS__QSPI1_A_DQS                        = IOMUX_PAD(0x04D8, 0x0190, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DQS__CAN2_TX                            = IOMUX_PAD(0x04D8, 0x0190, 1, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DQS__CANFD_TX2                          = IOMUX_PAD(0x04D8, 0x0190, 2, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DQS__ECSPI5_MOSI                        = IOMUX_PAD(0x04D8, 0x0190, 3, 0x0758, 1, 0),
+	 MX6_PAD_QSPI1A_DQS__CSI1_DATA_15                       = IOMUX_PAD(0x04D8, 0x0190, 4, 0x06D8, 1, 0),
+	 MX6_PAD_QSPI1A_DQS__GPIO4_IO_20                        = IOMUX_PAD(0x04D8, 0x0190, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DQS__WEIM_DATA_7                        = IOMUX_PAD(0x04D8, 0x0190, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DQS__SIM_M_HADDR_13                     = IOMUX_PAD(0x04D8, 0x0190, 7, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4            = IOMUX_PAD(0x04D8, 0x0190, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                      = IOMUX_PAD(0x04DC, 0x0194, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                    = IOMUX_PAD(0x04DC, 0x0194, 1, 0x0628, 2, 0),
+	 MX6_PAD_QSPI1A_SCLK__ECSPI1_SCLK                       = IOMUX_PAD(0x04DC, 0x0194, 2, 0x0710, 1, 0),
+	 MX6_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                      = IOMUX_PAD(0x04DC, 0x0194, 3, 0x0798, 2, 0),
+	 MX6_PAD_QSPI1A_SCLK__CSI1_DATA_1                       = IOMUX_PAD(0x04DC, 0x0194, 4, 0x06A4, 1, 0),
+	 MX6_PAD_QSPI1A_SCLK__GPIO4_IO_21                       = IOMUX_PAD(0x04DC, 0x0194, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SCLK__WEIM_DATA_0                       = IOMUX_PAD(0x04DC, 0x0194, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                     = IOMUX_PAD(0x04DC, 0x0194, 7, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                   = IOMUX_PAD(0x04DC, 0x0194, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                    = IOMUX_PAD(0x04E0, 0x0198, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                     = IOMUX_PAD(0x04E0, 0x0198, 1, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS0_B__ECSPI1_SS0                       = IOMUX_PAD(0x04E0, 0x0198, 2, 0x071C, 1, 0),
+	 MX6_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                     = IOMUX_PAD(0x04E0, 0x0198, 3, 0x079C, 2, 0),
+	 MX6_PAD_QSPI1A_SS0_B__CSI1_DATA_0                      = IOMUX_PAD(0x04E0, 0x0198, 4, 0x06A0, 1, 0),
+	 MX6_PAD_QSPI1A_SS0_B__GPIO4_IO_22                      = IOMUX_PAD(0x04E0, 0x0198, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS0_B__WEIM_DATA_1                      = IOMUX_PAD(0x04E0, 0x0198, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                    = IOMUX_PAD(0x04E0, 0x0198, 7, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                  = IOMUX_PAD(0x04E0, 0x0198, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                    = IOMUX_PAD(0x04E4, 0x019C, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS1_B__CAN1_RX                          = IOMUX_PAD(0x04E4, 0x019C, 1, 0x068C, 2, 0),
+	 MX6_PAD_QSPI1A_SS1_B__CANFD_RX1                        = IOMUX_PAD(0x04E4, 0x019C, 2, 0x0694, 2, 0),
+	 MX6_PAD_QSPI1A_SS1_B__ECSPI5_MISO                      = IOMUX_PAD(0x04E4, 0x019C, 3, 0x0754, 1, 0),
+	 MX6_PAD_QSPI1A_SS1_B__CSI1_DATA_10                     = IOMUX_PAD(0x04E4, 0x019C, 4, 0x06FC, 1, 0),
+	 MX6_PAD_QSPI1A_SS1_B__GPIO4_IO_23                      = IOMUX_PAD(0x04E4, 0x019C, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS1_B__WEIM_DATA_2                      = IOMUX_PAD(0x04E4, 0x019C, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                   = IOMUX_PAD(0x04E4, 0x019C, 7, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                  = IOMUX_PAD(0x04E4, 0x019C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                   = IOMUX_PAD(0x04E8, 0x01A0, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA0__UART3_CTS_B                      = IOMUX_PAD(0x04E8, 0x01A0, 1, 0x083C, 4, 0),
+	 MX6_PAD_QSPI1B_DATA0__ECSPI3_MOSI                      = IOMUX_PAD(0x04E8, 0x01A0, 2, 0x0738, 1, 0),
+	 MX6_PAD_QSPI1B_DATA0__ESAI_RX_FS                       = IOMUX_PAD(0x04E8, 0x01A0, 3, 0x0778, 2, 0),
+	 MX6_PAD_QSPI1B_DATA0__CSI1_DATA_22                     = IOMUX_PAD(0x04E8, 0x01A0, 4, 0x06F4, 1, 0),
+	 MX6_PAD_QSPI1B_DATA0__GPIO4_IO_24                      = IOMUX_PAD(0x04E8, 0x01A0, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA0__WEIM_DATA_14                     = IOMUX_PAD(0x04E8, 0x01A0, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                    = IOMUX_PAD(0x04E8, 0x01A0, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                   = IOMUX_PAD(0x04EC, 0x01A4, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA1__UART3_RTS_B                      = IOMUX_PAD(0x04EC, 0x01A4, 1, 0x083C, 5, 0),
+	 MX6_PAD_QSPI1B_DATA1__ECSPI3_MISO                      = IOMUX_PAD(0x04EC, 0x01A4, 2, 0x0734, 1, 0),
+	 MX6_PAD_QSPI1B_DATA1__ESAI_RX_CLK                      = IOMUX_PAD(0x04EC, 0x01A4, 3, 0x0788, 2, 0),
+	 MX6_PAD_QSPI1B_DATA1__CSI1_DATA_21                     = IOMUX_PAD(0x04EC, 0x01A4, 4, 0x06F0, 1, 0),
+	 MX6_PAD_QSPI1B_DATA1__GPIO4_IO_25                      = IOMUX_PAD(0x04EC, 0x01A4, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA1__WEIM_DATA_13                     = IOMUX_PAD(0x04EC, 0x01A4, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                    = IOMUX_PAD(0x04EC, 0x01A4, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                   = IOMUX_PAD(0x04F0, 0x01A8, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA2__I2C2_SDA                         = IOMUX_PAD(0x04F0, 0x01A8, IOMUX_CONFIG_SION | 1, 0x07B4, 2, 0),
+	 MX6_PAD_QSPI1B_DATA2__ECSPI5_RDY                       = IOMUX_PAD(0x04F0, 0x01A8, 2, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                     = IOMUX_PAD(0x04F0, 0x01A8, 3, 0x07A4, 2, 0),
+	 MX6_PAD_QSPI1B_DATA2__CSI1_DATA_20                     = IOMUX_PAD(0x04F0, 0x01A8, 4, 0x06EC, 1, 0),
+	 MX6_PAD_QSPI1B_DATA2__GPIO4_IO_26                      = IOMUX_PAD(0x04F0, 0x01A8, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA2__WEIM_DATA_12                     = IOMUX_PAD(0x04F0, 0x01A8, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                    = IOMUX_PAD(0x04F0, 0x01A8, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                   = IOMUX_PAD(0x04F4, 0x01AC, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA3__I2C2_SCL                         = IOMUX_PAD(0x04F4, 0x01AC, IOMUX_CONFIG_SION | 1, 0x07B0, 2, 0),
+	 MX6_PAD_QSPI1B_DATA3__ECSPI5_SS3                       = IOMUX_PAD(0x04F4, 0x01AC, 2, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA3__ESAI_TX_FS                       = IOMUX_PAD(0x04F4, 0x01AC, 3, 0x077C, 2, 0),
+	 MX6_PAD_QSPI1B_DATA3__CSI1_DATA_19                     = IOMUX_PAD(0x04F4, 0x01AC, 4, 0x06E8, 1, 0),
+	 MX6_PAD_QSPI1B_DATA3__GPIO4_IO_27                      = IOMUX_PAD(0x04F4, 0x01AC, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA3__WEIM_DATA_11                     = IOMUX_PAD(0x04F4, 0x01AC, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                    = IOMUX_PAD(0x04F4, 0x01AC, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1B_DQS__QSPI1_B_DQS                        = IOMUX_PAD(0x04F8, 0x01B0, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DQS__CAN1_TX                            = IOMUX_PAD(0x04F8, 0x01B0, 1, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DQS__CANFD_TX1                          = IOMUX_PAD(0x04F8, 0x01B0, 2, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DQS__ECSPI5_SS0                         = IOMUX_PAD(0x04F8, 0x01B0, 3, 0x075C, 1, 0),
+	 MX6_PAD_QSPI1B_DQS__CSI1_DATA_23                       = IOMUX_PAD(0x04F8, 0x01B0, 4, 0x06F8, 1, 0),
+	 MX6_PAD_QSPI1B_DQS__GPIO4_IO_28                        = IOMUX_PAD(0x04F8, 0x01B0, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DQS__WEIM_DATA_15                       = IOMUX_PAD(0x04F8, 0x01B0, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_DQS__SIM_M_HADDR_15                     = IOMUX_PAD(0x04F8, 0x01B0, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                      = IOMUX_PAD(0x04FC, 0x01B4, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SCLK__UART3_RX                          = IOMUX_PAD(0x04FC, 0x01B4, 1, 0x0840, 4, 0),
+	 MX6_PAD_QSPI1B_SCLK__ECSPI3_SCLK                       = IOMUX_PAD(0x04FC, 0x01B4, 2, 0x0730, 1, 0),
+	 MX6_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                    = IOMUX_PAD(0x04FC, 0x01B4, 3, 0x0780, 2, 0),
+	 MX6_PAD_QSPI1B_SCLK__CSI1_DATA_16                      = IOMUX_PAD(0x04FC, 0x01B4, 4, 0x06DC, 1, 0),
+	 MX6_PAD_QSPI1B_SCLK__GPIO4_IO_29                       = IOMUX_PAD(0x04FC, 0x01B4, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SCLK__WEIM_DATA_8                       = IOMUX_PAD(0x04FC, 0x01B4, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                    = IOMUX_PAD(0x04FC, 0x01B4, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                    = IOMUX_PAD(0x0500, 0x01B8, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SS0_B__UART3_TX                         = IOMUX_PAD(0x0500, 0x01B8, 1, 0x0840, 5, 0),
+	 MX6_PAD_QSPI1B_SS0_B__ECSPI3_SS0                       = IOMUX_PAD(0x0500, 0x01B8, 2, 0x073C, 1, 0),
+	 MX6_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                   = IOMUX_PAD(0x0500, 0x01B8, 3, 0x0784, 3, 0),
+	 MX6_PAD_QSPI1B_SS0_B__CSI1_DATA_17                     = IOMUX_PAD(0x0500, 0x01B8, 4, 0x06E0, 1, 0),
+	 MX6_PAD_QSPI1B_SS0_B__GPIO4_IO_30                      = IOMUX_PAD(0x0500, 0x01B8, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SS0_B__WEIM_DATA_9                      = IOMUX_PAD(0x0500, 0x01B8, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                   = IOMUX_PAD(0x0500, 0x01B8, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                    = IOMUX_PAD(0x0504, 0x01BC, 0, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SS1_B__CAN2_RX                          = IOMUX_PAD(0x0504, 0x01BC, 1, 0x0690, 2, 0),
+	 MX6_PAD_QSPI1B_SS1_B__CANFD_RX2                        = IOMUX_PAD(0x0504, 0x01BC, 2, 0x0698, 2, 0),
+	 MX6_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                      = IOMUX_PAD(0x0504, 0x01BC, 3, 0x0750, 1, 0),
+	 MX6_PAD_QSPI1B_SS1_B__CSI1_DATA_18                     = IOMUX_PAD(0x0504, 0x01BC, 4, 0x06E4, 1, 0),
+	 MX6_PAD_QSPI1B_SS1_B__GPIO4_IO_31                      = IOMUX_PAD(0x0504, 0x01BC, 5, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SS1_B__WEIM_DATA_10                     = IOMUX_PAD(0x0504, 0x01BC, 6, 0x0000, 0, 0),
+	 MX6_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                   = IOMUX_PAD(0x0504, 0x01BC, 7, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0                    = IOMUX_PAD(0x0508, 0x01C0, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD0__GPIO5_IO_0                         = IOMUX_PAD(0x0508, 0x01C0, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD0__CSI2_DATA_10                       = IOMUX_PAD(0x0508, 0x01C0, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD0__ANATOP_TESTI_0                     = IOMUX_PAD(0x0508, 0x01C0, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER             = IOMUX_PAD(0x0508, 0x01C0, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                  = IOMUX_PAD(0x0508, 0x01C0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1                    = IOMUX_PAD(0x050C, 0x01C4, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD1__GPIO5_IO_1                         = IOMUX_PAD(0x050C, 0x01C4, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD1__CSI2_DATA_11                       = IOMUX_PAD(0x050C, 0x01C4, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD1__ANATOP_TESTI_1                     = IOMUX_PAD(0x050C, 0x01C4, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER              = IOMUX_PAD(0x050C, 0x01C4, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                  = IOMUX_PAD(0x050C, 0x01C4, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_RD2__ENET1_RX_DATA_2                    = IOMUX_PAD(0x0510, 0x01C8, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD2__GPIO5_IO_2                         = IOMUX_PAD(0x0510, 0x01C8, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD2__CSI2_DATA_12                       = IOMUX_PAD(0x0510, 0x01C8, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD2__ANATOP_TESTI_2                     = IOMUX_PAD(0x0510, 0x01C8, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER              = IOMUX_PAD(0x0510, 0x01C8, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                  = IOMUX_PAD(0x0510, 0x01C8, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_RD3__ENET1_RX_DATA_3                    = IOMUX_PAD(0x0514, 0x01CC, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD3__GPIO5_IO_3                         = IOMUX_PAD(0x0514, 0x01CC, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD3__CSI2_DATA_13                       = IOMUX_PAD(0x0514, 0x01CC, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD3__ANATOP_TESTI_3                     = IOMUX_PAD(0x0514, 0x01CC, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER              = IOMUX_PAD(0x0514, 0x01CC, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                  = IOMUX_PAD(0x0514, 0x01CC, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN                     = IOMUX_PAD(0x0518, 0x01D0, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RX_CTL__GPIO5_IO_4                      = IOMUX_PAD(0x0518, 0x01D0, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RX_CTL__CSI2_DATA_14                    = IOMUX_PAD(0x0518, 0x01D0, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                  = IOMUX_PAD(0x0518, 0x01D0, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER           = IOMUX_PAD(0x0518, 0x01D0, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4               = IOMUX_PAD(0x0518, 0x01D0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_RXC__ENET1_RX_CLK                       = IOMUX_PAD(0x051C, 0x01D4, 0, 0x0768, 1, 0),
+	 MX6_PAD_RGMII1_RXC__ENET1_RX_ER                        = IOMUX_PAD(0x051C, 0x01D4, 1, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RXC__GPIO5_IO_5                         = IOMUX_PAD(0x051C, 0x01D4, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RXC__CSI2_DATA_15                       = IOMUX_PAD(0x051C, 0x01D4, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RXC__ANATOP_TESTO_1                     = IOMUX_PAD(0x051C, 0x01D4, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER              = IOMUX_PAD(0x051C, 0x01D4, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                  = IOMUX_PAD(0x051C, 0x01D4, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0                    = IOMUX_PAD(0x0520, 0x01D8, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD0__SAI2_RX_SYNC                       = IOMUX_PAD(0x0520, 0x01D8, 2, 0x0810, 1, 0),
+	 MX6_PAD_RGMII1_TD0__GPIO5_IO_6                         = IOMUX_PAD(0x0520, 0x01D8, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD0__CSI2_DATA_16                       = IOMUX_PAD(0x0520, 0x01D8, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD0__ANATOP_TESTO_2                     = IOMUX_PAD(0x0520, 0x01D8, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER              = IOMUX_PAD(0x0520, 0x01D8, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                  = IOMUX_PAD(0x0520, 0x01D8, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1                    = IOMUX_PAD(0x0524, 0x01DC, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD1__SAI2_RX_BCLK                       = IOMUX_PAD(0x0524, 0x01DC, 2, 0x0808, 1, 0),
+	 MX6_PAD_RGMII1_TD1__GPIO5_IO_7                         = IOMUX_PAD(0x0524, 0x01DC, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD1__CSI2_DATA_17                       = IOMUX_PAD(0x0524, 0x01DC, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD1__ANATOP_TESTO_3                     = IOMUX_PAD(0x0524, 0x01DC, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER              = IOMUX_PAD(0x0524, 0x01DC, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                  = IOMUX_PAD(0x0524, 0x01DC, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_TD2__ENET1_TX_DATA_2                    = IOMUX_PAD(0x0528, 0x01E0, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD2__SAI2_TX_SYNC                       = IOMUX_PAD(0x0528, 0x01E0, 2, 0x0818, 1, 0),
+	 MX6_PAD_RGMII1_TD2__GPIO5_IO_8                         = IOMUX_PAD(0x0528, 0x01E0, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD2__CSI2_DATA_18                       = IOMUX_PAD(0x0528, 0x01E0, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD2__ANATOP_TESTO_4                     = IOMUX_PAD(0x0528, 0x01E0, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER              = IOMUX_PAD(0x0528, 0x01E0, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                  = IOMUX_PAD(0x0528, 0x01E0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_TD3__ENET1_TX_DATA_3                    = IOMUX_PAD(0x052C, 0x01E4, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD3__SAI2_TX_BCLK                       = IOMUX_PAD(0x052C, 0x01E4, 2, 0x0814, 1, 0),
+	 MX6_PAD_RGMII1_TD3__GPIO5_IO_9                         = IOMUX_PAD(0x052C, 0x01E4, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD3__CSI2_DATA_19                       = IOMUX_PAD(0x052C, 0x01E4, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD3__ANATOP_TESTO_5                     = IOMUX_PAD(0x052C, 0x01E4, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER              = IOMUX_PAD(0x052C, 0x01E4, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                  = IOMUX_PAD(0x052C, 0x01E4, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN                     = IOMUX_PAD(0x0530, 0x01E8, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                  = IOMUX_PAD(0x0530, 0x01E8, 2, 0x080C, 1, 0),
+	 MX6_PAD_RGMII1_TX_CTL__GPIO5_IO_10                     = IOMUX_PAD(0x0530, 0x01E8, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TX_CTL__CSI2_DATA_0                     = IOMUX_PAD(0x0530, 0x01E8, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                  = IOMUX_PAD(0x0530, 0x01E8, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER            = IOMUX_PAD(0x0530, 0x01E8, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10              = IOMUX_PAD(0x0530, 0x01E8, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII1_TXC__ENET1_RGMII_TXC                    = IOMUX_PAD(0x0534, 0x01EC, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TXC__ENET1_TX_ER                        = IOMUX_PAD(0x0534, 0x01EC, 1, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TXC__SAI2_TX_DATA_0                     = IOMUX_PAD(0x0534, 0x01EC, 2, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TXC__GPIO5_IO_11                        = IOMUX_PAD(0x0534, 0x01EC, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TXC__CSI2_DATA_1                        = IOMUX_PAD(0x0534, 0x01EC, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TXC__ANATOP_TESTO_7                     = IOMUX_PAD(0x0534, 0x01EC, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER               = IOMUX_PAD(0x0534, 0x01EC, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                 = IOMUX_PAD(0x0534, 0x01EC, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_RD0__ENET2_RX_DATA_0                    = IOMUX_PAD(0x0538, 0x01F0, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD0__PWM4_OUT                           = IOMUX_PAD(0x0538, 0x01F0, 2, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD0__GPIO5_IO_12                        = IOMUX_PAD(0x0538, 0x01F0, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD0__CSI2_DATA_2                        = IOMUX_PAD(0x0538, 0x01F0, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD0__ANATOP_TESTO_8                     = IOMUX_PAD(0x0538, 0x01F0, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD0__VDEC_DEBUG_18                      = IOMUX_PAD(0x0538, 0x01F0, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                 = IOMUX_PAD(0x0538, 0x01F0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_RD1__ENET2_RX_DATA_1                    = IOMUX_PAD(0x053C, 0x01F4, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD1__PWM3_OUT                           = IOMUX_PAD(0x053C, 0x01F4, 2, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD1__GPIO5_IO_13                        = IOMUX_PAD(0x053C, 0x01F4, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD1__CSI2_DATA_3                        = IOMUX_PAD(0x053C, 0x01F4, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD1__ANATOP_TESTO_9                     = IOMUX_PAD(0x053C, 0x01F4, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD1__VDEC_DEBUG_19                      = IOMUX_PAD(0x053C, 0x01F4, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                 = IOMUX_PAD(0x053C, 0x01F4, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_RD2__ENET2_RX_DATA_2                    = IOMUX_PAD(0x0540, 0x01F8, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD2__PWM2_OUT                           = IOMUX_PAD(0x0540, 0x01F8, 2, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD2__GPIO5_IO_14                        = IOMUX_PAD(0x0540, 0x01F8, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD2__CSI2_DATA_4                        = IOMUX_PAD(0x0540, 0x01F8, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD2__ANATOP_TESTO_10                    = IOMUX_PAD(0x0540, 0x01F8, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD2__VDEC_DEBUG_20                      = IOMUX_PAD(0x0540, 0x01F8, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                 = IOMUX_PAD(0x0540, 0x01F8, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_RD3__ENET2_RX_DATA_3                    = IOMUX_PAD(0x0544, 0x01FC, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD3__PWM1_OUT                           = IOMUX_PAD(0x0544, 0x01FC, 2, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD3__GPIO5_IO_15                        = IOMUX_PAD(0x0544, 0x01FC, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD3__CSI2_DATA_5                        = IOMUX_PAD(0x0544, 0x01FC, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD3__ANATOP_TESTO_11                    = IOMUX_PAD(0x0544, 0x01FC, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD3__VDEC_DEBUG_21                      = IOMUX_PAD(0x0544, 0x01FC, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                 = IOMUX_PAD(0x0544, 0x01FC, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_RX_CTL__ENET2_RX_EN                     = IOMUX_PAD(0x0548, 0x0200, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RX_CTL__GPIO5_IO_16                     = IOMUX_PAD(0x0548, 0x0200, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RX_CTL__CSI2_DATA_6                     = IOMUX_PAD(0x0548, 0x0200, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                 = IOMUX_PAD(0x0548, 0x0200, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                   = IOMUX_PAD(0x0548, 0x0200, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16              = IOMUX_PAD(0x0548, 0x0200, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_RXC__ENET2_RX_CLK                       = IOMUX_PAD(0x054C, 0x0204, 0, 0x0774, 1, 0),
+	 MX6_PAD_RGMII2_RXC__ENET2_RX_ER                        = IOMUX_PAD(0x054C, 0x0204, 1, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RXC__GPIO5_IO_17                        = IOMUX_PAD(0x054C, 0x0204, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RXC__CSI2_DATA_7                        = IOMUX_PAD(0x054C, 0x0204, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RXC__ANATOP_TESTO_13                    = IOMUX_PAD(0x054C, 0x0204, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RXC__VDEC_DEBUG_23                      = IOMUX_PAD(0x054C, 0x0204, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                 = IOMUX_PAD(0x054C, 0x0204, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_TD0__ENET2_TX_DATA_0                    = IOMUX_PAD(0x0550, 0x0208, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD0__SAI1_RX_SYNC                       = IOMUX_PAD(0x0550, 0x0208, 2, 0x07FC, 1, 0),
+	 MX6_PAD_RGMII2_TD0__PWM8_OUT                           = IOMUX_PAD(0x0550, 0x0208, 3, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD0__GPIO5_IO_18                        = IOMUX_PAD(0x0550, 0x0208, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD0__CSI2_DATA_8                        = IOMUX_PAD(0x0550, 0x0208, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD0__ANATOP_TESTO_14                    = IOMUX_PAD(0x0550, 0x0208, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD0__VDEC_DEBUG_24                      = IOMUX_PAD(0x0550, 0x0208, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                 = IOMUX_PAD(0x0550, 0x0208, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_TD1__ENET2_TX_DATA_1                    = IOMUX_PAD(0x0554, 0x020C, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD1__SAI1_RX_BCLK                       = IOMUX_PAD(0x0554, 0x020C, 2, 0x07F4, 1, 0),
+	 MX6_PAD_RGMII2_TD1__PWM7_OUT                           = IOMUX_PAD(0x0554, 0x020C, 3, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD1__GPIO5_IO_19                        = IOMUX_PAD(0x0554, 0x020C, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD1__CSI2_DATA_9                        = IOMUX_PAD(0x0554, 0x020C, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD1__ANATOP_TESTO_15                    = IOMUX_PAD(0x0554, 0x020C, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD1__VDEC_DEBUG_25                      = IOMUX_PAD(0x0554, 0x020C, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                 = IOMUX_PAD(0x0554, 0x020C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_TD2__ENET2_TX_DATA_2                    = IOMUX_PAD(0x0558, 0x0210, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD2__SAI1_TX_SYNC                       = IOMUX_PAD(0x0558, 0x0210, 2, 0x0804, 1, 0),
+	 MX6_PAD_RGMII2_TD2__PWM6_OUT                           = IOMUX_PAD(0x0558, 0x0210, 3, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD2__GPIO5_IO_20                        = IOMUX_PAD(0x0558, 0x0210, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD2__CSI2_VSYNC                         = IOMUX_PAD(0x0558, 0x0210, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD2__SJC_FAIL                           = IOMUX_PAD(0x0558, 0x0210, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD2__VDEC_DEBUG_26                      = IOMUX_PAD(0x0558, 0x0210, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                 = IOMUX_PAD(0x0558, 0x0210, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_TD3__ENET2_TX_DATA_3                    = IOMUX_PAD(0x055C, 0x0214, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD3__SAI1_TX_BCLK                       = IOMUX_PAD(0x055C, 0x0214, 2, 0x0800, 1, 0),
+	 MX6_PAD_RGMII2_TD3__PWM5_OUT                           = IOMUX_PAD(0x055C, 0x0214, 3, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD3__GPIO5_IO_21                        = IOMUX_PAD(0x055C, 0x0214, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD3__CSI2_HSYNC                         = IOMUX_PAD(0x055C, 0x0214, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD3__SJC_JTAG_ACT                       = IOMUX_PAD(0x055C, 0x0214, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD3__VDEC_DEBUG_27                      = IOMUX_PAD(0x055C, 0x0214, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                 = IOMUX_PAD(0x055C, 0x0214, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_TX_CTL__ENET2_TX_EN                     = IOMUX_PAD(0x0560, 0x0218, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                  = IOMUX_PAD(0x0560, 0x0218, 2, 0x07F8, 1, 0),
+	 MX6_PAD_RGMII2_TX_CTL__GPIO5_IO_22                     = IOMUX_PAD(0x0560, 0x0218, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TX_CTL__CSI2_FIELD                      = IOMUX_PAD(0x0560, 0x0218, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TX_CTL__SJC_DE_B                        = IOMUX_PAD(0x0560, 0x0218, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                   = IOMUX_PAD(0x0560, 0x0218, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22              = IOMUX_PAD(0x0560, 0x0218, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_RGMII2_TXC__ENET2_RGMII_TXC                    = IOMUX_PAD(0x0564, 0x021C, 0, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TXC__ENET2_TX_ER                        = IOMUX_PAD(0x0564, 0x021C, 1, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TXC__SAI1_TX_DATA_0                     = IOMUX_PAD(0x0564, 0x021C, 2, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TXC__GPIO5_IO_23                        = IOMUX_PAD(0x0564, 0x021C, 5, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TXC__CSI2_PIXCLK                        = IOMUX_PAD(0x0564, 0x021C, 6, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TXC__SJC_DONE                           = IOMUX_PAD(0x0564, 0x021C, 7, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TXC__VDEC_DEBUG_29                      = IOMUX_PAD(0x0564, 0x021C, 8, 0x0000, 0, 0),
+	 MX6_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                 = IOMUX_PAD(0x0564, 0x021C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD1_CLK__USDHC1_CLK                            = IOMUX_PAD(0x0568, 0x0220, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                      = IOMUX_PAD(0x0568, 0x0220, 1, 0x0668, 1, 0),
+	 MX6_PAD_SD1_CLK__WDOG2_WDOG_B                          = IOMUX_PAD(0x0568, 0x0220, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CLK__GPT_CLK                               = IOMUX_PAD(0x0568, 0x0220, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                  = IOMUX_PAD(0x0568, 0x0220, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CLK__GPIO6_IO_0                            = IOMUX_PAD(0x0568, 0x0220, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                 = IOMUX_PAD(0x0568, 0x0220, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CLK__CCM_OUT1                              = IOMUX_PAD(0x0568, 0x0220, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CLK__VADC_ADC_PROC_CLK                     = IOMUX_PAD(0x0568, 0x0220, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CLK__MMDC_DEBUG_45                         = IOMUX_PAD(0x0568, 0x0220, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD1_CMD__USDHC1_CMD                            = IOMUX_PAD(0x056C, 0x0224, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CMD__AUDMUX_AUD5_RXC                       = IOMUX_PAD(0x056C, 0x0224, 1, 0x0664, 1, 0),
+	 MX6_PAD_SD1_CMD__WDOG1_WDOG_B                          = IOMUX_PAD(0x056C, 0x0224, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CMD__GPT_COMPARE1                          = IOMUX_PAD(0x056C, 0x0224, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                  = IOMUX_PAD(0x056C, 0x0224, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CMD__GPIO6_IO_1                            = IOMUX_PAD(0x056C, 0x0224, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                  = IOMUX_PAD(0x056C, 0x0224, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CMD__CCM_CLKO1                             = IOMUX_PAD(0x056C, 0x0224, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CMD__VADC_EXT_SYSCLK                       = IOMUX_PAD(0x056C, 0x0224, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD1_CMD__MMDC_DEBUG_46                         = IOMUX_PAD(0x056C, 0x0224, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD1_DATA0__USDHC1_DATA0                        = IOMUX_PAD(0x0570, 0x0228, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                     = IOMUX_PAD(0x0570, 0x0228, 1, 0x065C, 1, 0),
+	 MX6_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS            = IOMUX_PAD(0x0570, 0x0228, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA0__GPT_CAPTURE1                        = IOMUX_PAD(0x0570, 0x0228, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA0__UART2_RX                            = IOMUX_PAD(0x0570, 0x0228, 4, 0x0838, 2, 0),
+	 MX6_PAD_SD1_DATA0__GPIO6_IO_2                          = IOMUX_PAD(0x0570, 0x0228, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                = IOMUX_PAD(0x0570, 0x0228, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA0__CCM_OUT2                            = IOMUX_PAD(0x0570, 0x0228, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA0__VADC_CLAMP_UP                       = IOMUX_PAD(0x0570, 0x0228, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA0__MMDC_DEBUG_48                       = IOMUX_PAD(0x0570, 0x0228, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD1_DATA1__USDHC1_DATA1                        = IOMUX_PAD(0x0574, 0x022C, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                     = IOMUX_PAD(0x0574, 0x022C, 1, 0x066C, 1, 0),
+	 MX6_PAD_SD1_DATA1__PWM4_OUT                            = IOMUX_PAD(0x0574, 0x022C, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA1__GPT_CAPTURE2                        = IOMUX_PAD(0x0574, 0x022C, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA1__UART2_TX                            = IOMUX_PAD(0x0574, 0x022C, 4, 0x0838, 3, 0),
+	 MX6_PAD_SD1_DATA1__GPIO6_IO_3                          = IOMUX_PAD(0x0574, 0x022C, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT               = IOMUX_PAD(0x0574, 0x022C, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA1__CCM_CLKO2                           = IOMUX_PAD(0x0574, 0x022C, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA1__VADC_CLAMP_DOWN                     = IOMUX_PAD(0x0574, 0x022C, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA1__MMDC_DEBUG_47                       = IOMUX_PAD(0x0574, 0x022C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD1_DATA2__USDHC1_DATA2                        = IOMUX_PAD(0x0578, 0x0230, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                    = IOMUX_PAD(0x0578, 0x0230, 1, 0x0670, 1, 0),
+	 MX6_PAD_SD1_DATA2__PWM3_OUT                            = IOMUX_PAD(0x0578, 0x0230, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA2__GPT_COMPARE2                        = IOMUX_PAD(0x0578, 0x0230, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA2__UART2_CTS_B                         = IOMUX_PAD(0x0578, 0x0230, 4, 0x0834, 2, 0),
+	 MX6_PAD_SD1_DATA2__GPIO6_IO_4                          = IOMUX_PAD(0x0578, 0x0230, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA2__ECSPI4_RDY                          = IOMUX_PAD(0x0578, 0x0230, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA2__CCM_OUT0                            = IOMUX_PAD(0x0578, 0x0230, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA2__VADC_EXT_PD_N                       = IOMUX_PAD(0x0578, 0x0230, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_SD1_DATA3__USDHC1_DATA3                        = IOMUX_PAD(0x057C, 0x0234, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                     = IOMUX_PAD(0x057C, 0x0234, 1, 0x0660, 1, 0),
+	 MX6_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                     = IOMUX_PAD(0x057C, 0x0234, 2, 0x065C, 2, 0),
+	 MX6_PAD_SD1_DATA3__GPT_COMPARE3                        = IOMUX_PAD(0x057C, 0x0234, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA3__UART2_RTS_B                         = IOMUX_PAD(0x057C, 0x0234, 4, 0x0834, 3, 0),
+	 MX6_PAD_SD1_DATA3__GPIO6_IO_5                          = IOMUX_PAD(0x057C, 0x0234, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA3__ECSPI4_SS1                          = IOMUX_PAD(0x057C, 0x0234, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD1_DATA3__CCM_PMIC_RDY                        = IOMUX_PAD(0x057C, 0x0234, 7, 0x069C, 2, 0),
+	 MX6_PAD_SD1_DATA3__VADC_RST_N                          = IOMUX_PAD(0x057C, 0x0234, 8, 0x0000, 0, 0),
+
+	 MX6_PAD_SD2_CLK__USDHC2_CLK                            = IOMUX_PAD(0x0580, 0x0238, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                      = IOMUX_PAD(0x0580, 0x0238, 1, 0x0680, 2, 0),
+	 MX6_PAD_SD2_CLK__KPP_COL_5                             = IOMUX_PAD(0x0580, 0x0238, 2, 0x07C8, 1, 0),
+	 MX6_PAD_SD2_CLK__ECSPI4_SCLK                           = IOMUX_PAD(0x0580, 0x0238, 3, 0x0740, 1, 0),
+	 MX6_PAD_SD2_CLK__MLB_SIG                               = IOMUX_PAD(0x0580, 0x0238, 4, 0x07F0, 2, 0),
+	 MX6_PAD_SD2_CLK__GPIO6_IO_6                            = IOMUX_PAD(0x0580, 0x0238, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CLK__MQS_RIGHT                             = IOMUX_PAD(0x0580, 0x0238, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CLK__WDOG1_WDOG_ANY                        = IOMUX_PAD(0x0580, 0x0238, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                  = IOMUX_PAD(0x0580, 0x0238, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CLK__MMDC_DEBUG_29                         = IOMUX_PAD(0x0580, 0x0238, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD2_CMD__USDHC2_CMD                            = IOMUX_PAD(0x0584, 0x023C, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CMD__AUDMUX_AUD6_RXC                       = IOMUX_PAD(0x0584, 0x023C, 1, 0x067C, 2, 0),
+	 MX6_PAD_SD2_CMD__KPP_ROW_5                             = IOMUX_PAD(0x0584, 0x023C, 2, 0x07D4, 1, 0),
+	 MX6_PAD_SD2_CMD__ECSPI4_MOSI                           = IOMUX_PAD(0x0584, 0x023C, 3, 0x0748, 1, 0),
+	 MX6_PAD_SD2_CMD__MLB_CLK                               = IOMUX_PAD(0x0584, 0x023C, 4, 0x07E8, 2, 0),
+	 MX6_PAD_SD2_CMD__GPIO6_IO_7                            = IOMUX_PAD(0x0584, 0x023C, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CMD__MQS_LEFT                              = IOMUX_PAD(0x0584, 0x023C, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CMD__WDOG3_WDOG_B                          = IOMUX_PAD(0x0584, 0x023C, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                  = IOMUX_PAD(0x0584, 0x023C, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD2_CMD__MMDC_DEBUG_30                         = IOMUX_PAD(0x0584, 0x023C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD2_DATA0__USDHC2_DATA0                        = IOMUX_PAD(0x0588, 0x0240, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                     = IOMUX_PAD(0x0588, 0x0240, 1, 0x0674, 2, 0),
+	 MX6_PAD_SD2_DATA0__KPP_ROW_7                           = IOMUX_PAD(0x0588, 0x0240, 2, 0x07DC, 1, 0),
+	 MX6_PAD_SD2_DATA0__PWM1_OUT                            = IOMUX_PAD(0x0588, 0x0240, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA0__I2C4_SDA                            = IOMUX_PAD(0x0588, 0x0240, IOMUX_CONFIG_SION | 4, 0x07C4, 3, 0),
+	 MX6_PAD_SD2_DATA0__GPIO6_IO_8                          = IOMUX_PAD(0x0588, 0x0240, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA0__ECSPI4_SS3                          = IOMUX_PAD(0x0588, 0x0240, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA0__UART4_RX                            = IOMUX_PAD(0x0588, 0x0240, 7, 0x0848, 4, 0),
+	 MX6_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                = IOMUX_PAD(0x0588, 0x0240, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA0__MMDC_DEBUG_50                       = IOMUX_PAD(0x0588, 0x0240, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD2_DATA1__USDHC2_DATA1                        = IOMUX_PAD(0x058C, 0x0244, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                     = IOMUX_PAD(0x058C, 0x0244, 1, 0x0684, 2, 0),
+	 MX6_PAD_SD2_DATA1__KPP_COL_7                           = IOMUX_PAD(0x058C, 0x0244, 2, 0x07D0, 1, 0),
+	 MX6_PAD_SD2_DATA1__PWM2_OUT                            = IOMUX_PAD(0x058C, 0x0244, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA1__I2C4_SCL                            = IOMUX_PAD(0x058C, 0x0244, IOMUX_CONFIG_SION | 4, 0x07C0, 3, 0),
+	 MX6_PAD_SD2_DATA1__GPIO6_IO_9                          = IOMUX_PAD(0x058C, 0x0244, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA1__ECSPI4_SS2                          = IOMUX_PAD(0x058C, 0x0244, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA1__UART4_TX                            = IOMUX_PAD(0x058C, 0x0244, 7, 0x0848, 5, 0),
+	 MX6_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                = IOMUX_PAD(0x058C, 0x0244, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA1__MMDC_DEBUG_49                       = IOMUX_PAD(0x058C, 0x0244, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD2_DATA2__USDHC2_DATA2                        = IOMUX_PAD(0x0590, 0x0248, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                    = IOMUX_PAD(0x0590, 0x0248, 1, 0x0688, 2, 0),
+	 MX6_PAD_SD2_DATA2__KPP_ROW_6                           = IOMUX_PAD(0x0590, 0x0248, 2, 0x07D8, 1, 0),
+	 MX6_PAD_SD2_DATA2__ECSPI4_SS0                          = IOMUX_PAD(0x0590, 0x0248, 3, 0x074C, 1, 0),
+	 MX6_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                    = IOMUX_PAD(0x0590, 0x0248, 4, 0x081C, 2, 0),
+	 MX6_PAD_SD2_DATA2__GPIO6_IO_10                         = IOMUX_PAD(0x0590, 0x0248, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA2__SPDIF_OUT                           = IOMUX_PAD(0x0590, 0x0248, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA2__UART6_RX                            = IOMUX_PAD(0x0590, 0x0248, 7, 0x0858, 4, 0),
+	 MX6_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                = IOMUX_PAD(0x0590, 0x0248, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA2__MMDC_DEBUG_32                       = IOMUX_PAD(0x0590, 0x0248, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD2_DATA3__USDHC2_DATA3                        = IOMUX_PAD(0x0594, 0x024C, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                     = IOMUX_PAD(0x0594, 0x024C, 1, 0x0678, 2, 0),
+	 MX6_PAD_SD2_DATA3__KPP_COL_6                           = IOMUX_PAD(0x0594, 0x024C, 2, 0x07CC, 1, 0),
+	 MX6_PAD_SD2_DATA3__ECSPI4_MISO                         = IOMUX_PAD(0x0594, 0x024C, 3, 0x0744, 1, 0),
+	 MX6_PAD_SD2_DATA3__MLB_DATA                            = IOMUX_PAD(0x0594, 0x024C, 4, 0x07EC, 2, 0),
+	 MX6_PAD_SD2_DATA3__GPIO6_IO_11                         = IOMUX_PAD(0x0594, 0x024C, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA3__SPDIF_IN                            = IOMUX_PAD(0x0594, 0x024C, 6, 0x0824, 4, 0),
+	 MX6_PAD_SD2_DATA3__UART6_TX                            = IOMUX_PAD(0x0594, 0x024C, 7, 0x0858, 5, 0),
+	 MX6_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                = IOMUX_PAD(0x0594, 0x024C, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD2_DATA3__MMDC_DEBUG_31                       = IOMUX_PAD(0x0594, 0x024C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_CLK__USDHC3_CLK                            = IOMUX_PAD(0x0598, 0x0250, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_CLK__UART4_CTS_B                           = IOMUX_PAD(0x0598, 0x0250, 1, 0x0844, 0, 0),
+	 MX6_PAD_SD3_CLK__ECSPI4_SCLK                           = IOMUX_PAD(0x0598, 0x0250, 2, 0x0740, 0, 0),
+	 MX6_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                      = IOMUX_PAD(0x0598, 0x0250, 3, 0x0680, 0, 0),
+	 MX6_PAD_SD3_CLK__LCDIF2_VSYNC                          = IOMUX_PAD(0x0598, 0x0250, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_CLK__GPIO7_IO_0                            = IOMUX_PAD(0x0598, 0x0250, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_CLK__LCDIF2_BUSY                           = IOMUX_PAD(0x0598, 0x0250, 6, 0x07E4, 0, 0),
+	 MX6_PAD_SD3_CLK__TPSMP_HDATA_29                        = IOMUX_PAD(0x0598, 0x0250, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5            = IOMUX_PAD(0x0598, 0x0250, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_CMD__USDHC3_CMD                            = IOMUX_PAD(0x059C, 0x0254, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_CMD__UART4_TX                              = IOMUX_PAD(0x059C, 0x0254, 1, 0x0848, 0, 0),
+	 MX6_PAD_SD3_CMD__ECSPI4_MOSI                           = IOMUX_PAD(0x059C, 0x0254, 2, 0x0748, 0, 0),
+	 MX6_PAD_SD3_CMD__AUDMUX_AUD6_RXC                       = IOMUX_PAD(0x059C, 0x0254, 3, 0x067C, 0, 0),
+	 MX6_PAD_SD3_CMD__LCDIF2_HSYNC                          = IOMUX_PAD(0x059C, 0x0254, 4, 0x07E4, 1, 0),
+	 MX6_PAD_SD3_CMD__GPIO7_IO_1                            = IOMUX_PAD(0x059C, 0x0254, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_CMD__LCDIF2_RS                             = IOMUX_PAD(0x059C, 0x0254, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_CMD__TPSMP_HDATA_28                        = IOMUX_PAD(0x059C, 0x0254, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4            = IOMUX_PAD(0x059C, 0x0254, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_DATA0__USDHC3_DATA0                        = IOMUX_PAD(0x05A0, 0x0258, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA0__I2C4_SCL                            = IOMUX_PAD(0x05A0, 0x0258, IOMUX_CONFIG_SION | 1, 0x07C0, 0, 0),
+	 MX6_PAD_SD3_DATA0__ECSPI2_SS1                          = IOMUX_PAD(0x05A0, 0x0258, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                     = IOMUX_PAD(0x05A0, 0x0258, 3, 0x0674, 0, 0),
+	 MX6_PAD_SD3_DATA0__LCDIF2_DATA_1                       = IOMUX_PAD(0x05A0, 0x0258, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA0__GPIO7_IO_2                          = IOMUX_PAD(0x05A0, 0x0258, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA0__DCIC1_OUT                           = IOMUX_PAD(0x05A0, 0x0258, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA0__TPSMP_HDATA_30                      = IOMUX_PAD(0x05A0, 0x0258, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA0__GPU_DEBUG_0                         = IOMUX_PAD(0x05A0, 0x0258, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0          = IOMUX_PAD(0x05A0, 0x0258, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_DATA1__USDHC3_DATA1                        = IOMUX_PAD(0x05A4, 0x025C, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA1__I2C4_SDA                            = IOMUX_PAD(0x05A4, 0x025C, IOMUX_CONFIG_SION | 1, 0x07C4, 0, 0),
+	 MX6_PAD_SD3_DATA1__ECSPI2_SS2                          = IOMUX_PAD(0x05A4, 0x025C, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                     = IOMUX_PAD(0x05A4, 0x025C, 3, 0x0684, 0, 0),
+	 MX6_PAD_SD3_DATA1__LCDIF2_DATA_0                       = IOMUX_PAD(0x05A4, 0x025C, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA1__GPIO7_IO_3                          = IOMUX_PAD(0x05A4, 0x025C, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA1__DCIC2_OUT                           = IOMUX_PAD(0x05A4, 0x025C, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA1__TPSMP_HDATA_31                      = IOMUX_PAD(0x05A4, 0x025C, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA1__GPU_DEBUG_1                         = IOMUX_PAD(0x05A4, 0x025C, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1          = IOMUX_PAD(0x05A4, 0x025C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_DATA2__USDHC3_DATA2                        = IOMUX_PAD(0x05A8, 0x0260, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA2__UART4_RTS_B                         = IOMUX_PAD(0x05A8, 0x0260, 1, 0x0844, 1, 0),
+	 MX6_PAD_SD3_DATA2__ECSPI4_SS0                          = IOMUX_PAD(0x05A8, 0x0260, 2, 0x074C, 0, 0),
+	 MX6_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                    = IOMUX_PAD(0x05A8, 0x0260, 3, 0x0688, 0, 0),
+	 MX6_PAD_SD3_DATA2__LCDIF2_CLK                          = IOMUX_PAD(0x05A8, 0x0260, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA2__GPIO7_IO_4                          = IOMUX_PAD(0x05A8, 0x0260, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA2__LCDIF2_WR_RWN                       = IOMUX_PAD(0x05A8, 0x0260, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA2__TPSMP_HDATA_26                      = IOMUX_PAD(0x05A8, 0x0260, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA2__GPU_DEBUG_2                         = IOMUX_PAD(0x05A8, 0x0260, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2          = IOMUX_PAD(0x05A8, 0x0260, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_DATA3__USDHC3_DATA3                        = IOMUX_PAD(0x05AC, 0x0264, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA3__UART4_RX                            = IOMUX_PAD(0x05AC, 0x0264, 1, 0x0848, 1, 0),
+	 MX6_PAD_SD3_DATA3__ECSPI4_MISO                         = IOMUX_PAD(0x05AC, 0x0264, 2, 0x0744, 0, 0),
+	 MX6_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                     = IOMUX_PAD(0x05AC, 0x0264, 3, 0x0678, 0, 0),
+	 MX6_PAD_SD3_DATA3__LCDIF2_ENABLE                       = IOMUX_PAD(0x05AC, 0x0264, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA3__GPIO7_IO_5                          = IOMUX_PAD(0x05AC, 0x0264, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA3__LCDIF2_RD_E                         = IOMUX_PAD(0x05AC, 0x0264, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA3__TPSMP_HDATA_27                      = IOMUX_PAD(0x05AC, 0x0264, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA3__GPU_DEBUG_3                         = IOMUX_PAD(0x05AC, 0x0264, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3          = IOMUX_PAD(0x05AC, 0x0264, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_DATA4__USDHC3_DATA4                        = IOMUX_PAD(0x05B0, 0x0268, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA4__CAN2_RX                             = IOMUX_PAD(0x05B0, 0x0268, 1, 0x0690, 0, 0),
+	 MX6_PAD_SD3_DATA4__CANFD_RX2                           = IOMUX_PAD(0x05B0, 0x0268, 2, 0x0698, 0, 0),
+	 MX6_PAD_SD3_DATA4__UART3_RX                            = IOMUX_PAD(0x05B0, 0x0268, 3, 0x0840, 2, 0),
+	 MX6_PAD_SD3_DATA4__LCDIF2_DATA_3                       = IOMUX_PAD(0x05B0, 0x0268, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA4__GPIO7_IO_6                          = IOMUX_PAD(0x05B0, 0x0268, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                = IOMUX_PAD(0x05B0, 0x0268, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA4__TPSMP_HTRANS_1                      = IOMUX_PAD(0x05B0, 0x0268, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA4__GPU_DEBUG_4                         = IOMUX_PAD(0x05B0, 0x0268, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0             = IOMUX_PAD(0x05B0, 0x0268, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_DATA5__USDHC3_DATA5                        = IOMUX_PAD(0x05B4, 0x026C, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA5__CAN1_TX                             = IOMUX_PAD(0x05B4, 0x026C, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA5__CANFD_TX1                           = IOMUX_PAD(0x05B4, 0x026C, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA5__UART3_TX                            = IOMUX_PAD(0x05B4, 0x026C, 3, 0x0840, 3, 0),
+	 MX6_PAD_SD3_DATA5__LCDIF2_DATA_2                       = IOMUX_PAD(0x05B4, 0x026C, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA5__GPIO7_IO_7                          = IOMUX_PAD(0x05B4, 0x026C, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT               = IOMUX_PAD(0x05B4, 0x026C, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA5__SIM_M_HWRITE                        = IOMUX_PAD(0x05B4, 0x026C, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA5__GPU_DEBUG_5                         = IOMUX_PAD(0x05B4, 0x026C, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1             = IOMUX_PAD(0x05B4, 0x026C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_DATA6__USDHC3_DATA6                        = IOMUX_PAD(0x05B8, 0x0270, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA6__CAN2_TX                             = IOMUX_PAD(0x05B8, 0x0270, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA6__CANFD_TX2                           = IOMUX_PAD(0x05B8, 0x0270, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA6__UART3_RTS_B                         = IOMUX_PAD(0x05B8, 0x0270, 3, 0x083C, 2, 0),
+	 MX6_PAD_SD3_DATA6__LCDIF2_DATA_4                       = IOMUX_PAD(0x05B8, 0x0270, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA6__GPIO7_IO_8                          = IOMUX_PAD(0x05B8, 0x0270, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT               = IOMUX_PAD(0x05B8, 0x0270, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA6__TPSMP_HTRANS_0                      = IOMUX_PAD(0x05B8, 0x0270, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA6__GPU_DEBUG_7                         = IOMUX_PAD(0x05B8, 0x0270, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7          = IOMUX_PAD(0x05B8, 0x0270, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD3_DATA7__USDHC3_DATA7                        = IOMUX_PAD(0x05BC, 0x0274, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA7__CAN1_RX                             = IOMUX_PAD(0x05BC, 0x0274, 1, 0x068C, 0, 0),
+	 MX6_PAD_SD3_DATA7__CANFD_RX1                           = IOMUX_PAD(0x05BC, 0x0274, 2, 0x0694, 0, 0),
+	 MX6_PAD_SD3_DATA7__UART3_CTS_B                         = IOMUX_PAD(0x05BC, 0x0274, 3, 0x083C, 3, 0),
+	 MX6_PAD_SD3_DATA7__LCDIF2_DATA_5                       = IOMUX_PAD(0x05BC, 0x0274, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA7__GPIO7_IO_9                          = IOMUX_PAD(0x05BC, 0x0274, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                = IOMUX_PAD(0x05BC, 0x0274, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA7__TPSMP_HDATA_DIR                     = IOMUX_PAD(0x05BC, 0x0274, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA7__GPU_DEBUG_6                         = IOMUX_PAD(0x05BC, 0x0274, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2          = IOMUX_PAD(0x05BC, 0x0274, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_CLK__USDHC4_CLK                            = IOMUX_PAD(0x05C0, 0x0278, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CLK__RAWNAND_DATA15                        = IOMUX_PAD(0x05C0, 0x0278, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CLK__ECSPI2_MISO                           = IOMUX_PAD(0x05C0, 0x0278, 2, 0x0724, 1, 0),
+	 MX6_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                      = IOMUX_PAD(0x05C0, 0x0278, 3, 0x0638, 0, 0),
+	 MX6_PAD_SD4_CLK__LCDIF2_DATA_13                        = IOMUX_PAD(0x05C0, 0x0278, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CLK__GPIO6_IO_12                           = IOMUX_PAD(0x05C0, 0x0278, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CLK__ECSPI3_SS2                            = IOMUX_PAD(0x05C0, 0x0278, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CLK__TPSMP_HDATA_20                        = IOMUX_PAD(0x05C0, 0x0278, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CLK__VDEC_DEBUG_12                         = IOMUX_PAD(0x05C0, 0x0278, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL          = IOMUX_PAD(0x05C0, 0x0278, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_CMD__USDHC4_CMD                            = IOMUX_PAD(0x05C4, 0x027C, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CMD__RAWNAND_DATA14                        = IOMUX_PAD(0x05C4, 0x027C, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CMD__ECSPI2_MOSI                           = IOMUX_PAD(0x05C4, 0x027C, 2, 0x0728, 1, 0),
+	 MX6_PAD_SD4_CMD__AUDMUX_AUD3_RXC                       = IOMUX_PAD(0x05C4, 0x027C, 3, 0x0634, 0, 0),
+	 MX6_PAD_SD4_CMD__LCDIF2_DATA_14                        = IOMUX_PAD(0x05C4, 0x027C, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CMD__GPIO6_IO_13                           = IOMUX_PAD(0x05C4, 0x027C, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CMD__ECSPI3_SS1                            = IOMUX_PAD(0x05C4, 0x027C, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CMD__TPSMP_HDATA_19                        = IOMUX_PAD(0x05C4, 0x027C, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CMD__VDEC_DEBUG_11                         = IOMUX_PAD(0x05C4, 0x027C, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                   = IOMUX_PAD(0x05C4, 0x027C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_DATA0__USDHC4_DATA0                        = IOMUX_PAD(0x05C8, 0x0280, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA0__RAWNAND_DATA10                      = IOMUX_PAD(0x05C8, 0x0280, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA0__ECSPI2_SS0                          = IOMUX_PAD(0x05C8, 0x0280, 2, 0x072C, 1, 0),
+	 MX6_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                     = IOMUX_PAD(0x05C8, 0x0280, 3, 0x062C, 0, 0),
+	 MX6_PAD_SD4_DATA0__LCDIF2_DATA_12                      = IOMUX_PAD(0x05C8, 0x0280, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA0__GPIO6_IO_14                         = IOMUX_PAD(0x05C8, 0x0280, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA0__ECSPI3_SS3                          = IOMUX_PAD(0x05C8, 0x0280, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA0__TPSMP_HDATA_21                      = IOMUX_PAD(0x05C8, 0x0280, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA0__VDEC_DEBUG_13                       = IOMUX_PAD(0x05C8, 0x0280, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA0__SDMA_DEBUG_MODE                     = IOMUX_PAD(0x05C8, 0x0280, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_DATA1__USDHC4_DATA1                        = IOMUX_PAD(0x05CC, 0x0284, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA1__RAWNAND_DATA11                      = IOMUX_PAD(0x05CC, 0x0284, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA1__ECSPI2_SCLK                         = IOMUX_PAD(0x05CC, 0x0284, 2, 0x0720, 1, 0),
+	 MX6_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                     = IOMUX_PAD(0x05CC, 0x0284, 3, 0x063C, 0, 0),
+	 MX6_PAD_SD4_DATA1__LCDIF2_DATA_11                      = IOMUX_PAD(0x05CC, 0x0284, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA1__GPIO6_IO_15                         = IOMUX_PAD(0x05CC, 0x0284, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA1__ECSPI3_RDY                          = IOMUX_PAD(0x05CC, 0x0284, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA1__TPSMP_HDATA_22                      = IOMUX_PAD(0x05CC, 0x0284, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA1__VDEC_DEBUG_14                       = IOMUX_PAD(0x05CC, 0x0284, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                = IOMUX_PAD(0x05CC, 0x0284, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_DATA2__USDHC4_DATA2                        = IOMUX_PAD(0x05D0, 0x0288, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA2__RAWNAND_DATA12                      = IOMUX_PAD(0x05D0, 0x0288, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA2__I2C2_SDA                            = IOMUX_PAD(0x05D0, 0x0288, IOMUX_CONFIG_SION | 2, 0x07B4, 0, 0),
+	 MX6_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                    = IOMUX_PAD(0x05D0, 0x0288, 3, 0x0640, 0, 0),
+	 MX6_PAD_SD4_DATA2__LCDIF2_DATA_10                      = IOMUX_PAD(0x05D0, 0x0288, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA2__GPIO6_IO_16                         = IOMUX_PAD(0x05D0, 0x0288, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA2__ECSPI2_SS3                          = IOMUX_PAD(0x05D0, 0x0288, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA2__TPSMP_HDATA_23                      = IOMUX_PAD(0x05D0, 0x0288, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA2__VDEC_DEBUG_15                       = IOMUX_PAD(0x05D0, 0x0288, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                  = IOMUX_PAD(0x05D0, 0x0288, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_DATA3__USDHC4_DATA3                        = IOMUX_PAD(0x05D4, 0x028C, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA3__RAWNAND_DATA13                      = IOMUX_PAD(0x05D4, 0x028C, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA3__I2C2_SCL                            = IOMUX_PAD(0x05D4, 0x028C, IOMUX_CONFIG_SION | 2, 0x07B0, 0, 0),
+	 MX6_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                     = IOMUX_PAD(0x05D4, 0x028C, 3, 0x0630, 0, 0),
+	 MX6_PAD_SD4_DATA3__LCDIF2_DATA_9                       = IOMUX_PAD(0x05D4, 0x028C, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA3__GPIO6_IO_17                         = IOMUX_PAD(0x05D4, 0x028C, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA3__ECSPI2_RDY                          = IOMUX_PAD(0x05D4, 0x028C, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA3__TPSMP_HDATA_24                      = IOMUX_PAD(0x05D4, 0x028C, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA3__VDEC_DEBUG_16                       = IOMUX_PAD(0x05D4, 0x028C, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS            = IOMUX_PAD(0x05D4, 0x028C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_DATA4__USDHC4_DATA4                        = IOMUX_PAD(0x05D8, 0x0290, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA4__RAWNAND_DATA09                      = IOMUX_PAD(0x05D8, 0x0290, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA4__UART5_RX                            = IOMUX_PAD(0x05D8, 0x0290, 2, 0x0850, 0, 0),
+	 MX6_PAD_SD4_DATA4__ECSPI3_SCLK                         = IOMUX_PAD(0x05D8, 0x0290, 3, 0x0730, 0, 0),
+	 MX6_PAD_SD4_DATA4__LCDIF2_DATA_8                       = IOMUX_PAD(0x05D8, 0x0290, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA4__GPIO6_IO_18                         = IOMUX_PAD(0x05D8, 0x0290, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA4__SPDIF_OUT                           = IOMUX_PAD(0x05D8, 0x0290, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA4__TPSMP_HDATA_16                      = IOMUX_PAD(0x05D8, 0x0290, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA4__USB_OTG_HOST_MODE                   = IOMUX_PAD(0x05D8, 0x0290, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE           = IOMUX_PAD(0x05D8, 0x0290, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_DATA5__USDHC4_DATA5                        = IOMUX_PAD(0x05DC, 0x0294, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA5__RAWNAND_CE2_B                       = IOMUX_PAD(0x05DC, 0x0294, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA5__UART5_TX                            = IOMUX_PAD(0x05DC, 0x0294, 2, 0x0850, 1, 0),
+	 MX6_PAD_SD4_DATA5__ECSPI3_MOSI                         = IOMUX_PAD(0x05DC, 0x0294, 3, 0x0738, 0, 0),
+	 MX6_PAD_SD4_DATA5__LCDIF2_DATA_7                       = IOMUX_PAD(0x05DC, 0x0294, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA5__GPIO6_IO_19                         = IOMUX_PAD(0x05DC, 0x0294, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA5__SPDIF_IN                            = IOMUX_PAD(0x05DC, 0x0294, 6, 0x0824, 0, 0),
+	 MX6_PAD_SD4_DATA5__TPSMP_HDATA_17                      = IOMUX_PAD(0x05DC, 0x0294, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA5__VDEC_DEBUG_9                        = IOMUX_PAD(0x05DC, 0x0294, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0          = IOMUX_PAD(0x05DC, 0x0294, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_DATA6__USDHC4_DATA6                        = IOMUX_PAD(0x05E0, 0x0298, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA6__RAWNAND_CE3_B                       = IOMUX_PAD(0x05E0, 0x0298, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA6__UART5_RTS_B                         = IOMUX_PAD(0x05E0, 0x0298, 2, 0x084C, 0, 0),
+	 MX6_PAD_SD4_DATA6__ECSPI3_MISO                         = IOMUX_PAD(0x05E0, 0x0298, 3, 0x0734, 0, 0),
+	 MX6_PAD_SD4_DATA6__LCDIF2_DATA_6                       = IOMUX_PAD(0x05E0, 0x0298, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA6__GPIO6_IO_20                         = IOMUX_PAD(0x05E0, 0x0298, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA6__USDHC4_WP                           = IOMUX_PAD(0x05E0, 0x0298, 6, 0x0878, 0, 0),
+	 MX6_PAD_SD4_DATA6__TPSMP_HDATA_18                      = IOMUX_PAD(0x05E0, 0x0298, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA6__VDEC_DEBUG_10                       = IOMUX_PAD(0x05E0, 0x0298, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1          = IOMUX_PAD(0x05E0, 0x0298, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_DATA7__USDHC4_DATA7                        = IOMUX_PAD(0x05E4, 0x029C, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA7__RAWNAND_DATA08                      = IOMUX_PAD(0x05E4, 0x029C, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA7__UART5_CTS_B                         = IOMUX_PAD(0x05E4, 0x029C, 2, 0x084C, 1, 0),
+	 MX6_PAD_SD4_DATA7__ECSPI3_SS0                          = IOMUX_PAD(0x05E4, 0x029C, 3, 0x073C, 0, 0),
+	 MX6_PAD_SD4_DATA7__LCDIF2_DATA_15                      = IOMUX_PAD(0x05E4, 0x029C, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA7__GPIO6_IO_21                         = IOMUX_PAD(0x05E4, 0x029C, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA7__USDHC4_CD_B                         = IOMUX_PAD(0x05E4, 0x029C, 6, 0x0874, 0, 0),
+	 MX6_PAD_SD4_DATA7__TPSMP_HDATA_15                      = IOMUX_PAD(0x05E4, 0x029C, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                    = IOMUX_PAD(0x05E4, 0x029C, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                    = IOMUX_PAD(0x05E4, 0x029C, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_SD4_RESET_B__USDHC4_RESET_B                    = IOMUX_PAD(0x05E8, 0x02A0, 0, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__RAWNAND_DQS                       = IOMUX_PAD(0x05E8, 0x02A0, 1, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__USDHC4_RESET                      = IOMUX_PAD(0x05E8, 0x02A0, 2, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__AUDMUX_MCLK                       = IOMUX_PAD(0x05E8, 0x02A0, 3, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__LCDIF2_RESET                      = IOMUX_PAD(0x05E8, 0x02A0, 4, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__GPIO6_IO_22                       = IOMUX_PAD(0x05E8, 0x02A0, 5, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__LCDIF2_CS                         = IOMUX_PAD(0x05E8, 0x02A0, 6, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__TPSMP_HDATA_25                    = IOMUX_PAD(0x05E8, 0x02A0, 7, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__VDEC_DEBUG_17                     = IOMUX_PAD(0x05E8, 0x02A0, 8, 0x0000, 0, 0),
+	 MX6_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2           = IOMUX_PAD(0x05E8, 0x02A0, 9, 0x0000, 0, 0),
+
+	 MX6_PAD_USB_H_DATA__USB_H_DATA                         = IOMUX_PAD(0x05EC, 0x02A4, 0, 0x0000, 0, 0),
+	 MX6_PAD_USB_H_DATA__PWM2_OUT                           = IOMUX_PAD(0x05EC, 0x02A4, 1, 0x0000, 0, 0),
+	 MX6_PAD_USB_H_DATA__ANATOP_24M_OUT                     = IOMUX_PAD(0x05EC, 0x02A4, 2, 0x0000, 0, 0),
+	 MX6_PAD_USB_H_DATA__I2C4_SDA                           = IOMUX_PAD(0x05EC, 0x02A4, IOMUX_CONFIG_SION | 3, 0x07C4, 1, 0),
+	 MX6_PAD_USB_H_DATA__WDOG3_WDOG_B                       = IOMUX_PAD(0x05EC, 0x02A4, 4, 0x0000, 0, 0),
+	 MX6_PAD_USB_H_DATA__GPIO7_IO_10                        = IOMUX_PAD(0x05EC, 0x02A4, 5, 0x0000, 0, 0),
+
+	 MX6_PAD_USB_H_STROBE__USB_H_STROBE                     = IOMUX_PAD(0x05F0, 0x02A8, 0, 0x0000, 0, 0),
+	 MX6_PAD_USB_H_STROBE__PWM1_OUT                         = IOMUX_PAD(0x05F0, 0x02A8, 1, 0x0000, 0, 0),
+	 MX6_PAD_USB_H_STROBE__ANATOP_32K_OUT                   = IOMUX_PAD(0x05F0, 0x02A8, 2, 0x0000, 0, 0),
+	 MX6_PAD_USB_H_STROBE__I2C4_SCL                         = IOMUX_PAD(0x05F0, 0x02A8, IOMUX_CONFIG_SION | 3, 0x07C0, 1, 0),
+	 MX6_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB             = IOMUX_PAD(0x05F0, 0x02A8, 4, 0x0000, 0, 0),
+	 MX6_PAD_USB_H_STROBE__GPIO7_IO_11                      = IOMUX_PAD(0x05F0, 0x02A8, 5, 0x0000, 0, 0),
+};
+#endif  /* __ASM_ARCH_MX6_ MX6_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx_rdc.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx_rdc.h
new file mode 100644
index 000000000..7ff201612
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6sx_rdc.h
@@ -0,0 +1,154 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MX6SX_RDC_H__
+#define __MX6SX_RDC_H__
+
+#define RDC_SEMA_PROC_ID 2  /* The processor ID for main CPU */
+
+enum {
+	RDC_PER_PWM1 = 0,
+	RDC_PER_PWM2,
+	RDC_PER_PWM3,
+	RDC_PER_PWM4,
+	RDC_PER_CAN1,
+	RDC_PER_CAN2,
+	RDC_PER_GPT,
+	RDC_PER_GPIO1,
+	RDC_PER_GPIO2,
+	RDC_PER_GPIO3,
+	RDC_PER_GPIO4,
+	RDC_PER_GPIO5,
+	RDC_PER_GPIO6,
+	RDC_PER_GPIO7,
+	RDC_PER_KPP,
+	RDC_PER_WDOG1,
+	RDC_PER_WODG2,
+	RDC_PER_CCM,
+	RDC_PER_ANATOPDIG,
+	RDC_PER_SNVSHP,
+	RDC_PER_EPIT1,
+	RDC_PER_EPIT2,
+	RDC_PER_SRC,
+	RDC_PER_GPC,
+	RDC_PER_IOMUXC,
+	RDC_PER_IOMUXCGPR,
+	RDC_PER_CANFD1,
+	RDC_PER_SDMA,
+	RDC_PER_CANFD2,
+	RDC_PER_SEMA1,
+	RDC_PER_SEMA2,
+	RDC_PER_RDC,
+	RDC_PER_AIPSTZ1_GE1,
+	RDC_PER_AIPSTZ2_GE2,
+	RDC_PER_USBO2H_PL301,
+	RDC_PER_USBO2H_USB,
+	RDC_PER_ENET1,
+	RDC_PER_MLB25,
+	RDC_PER_USDHC1,
+	RDC_PER_USDHC2,
+	RDC_PER_USDHC3,
+	RDC_PER_USDHC4,
+	RDC_PER_I2C1,
+	RDC_PER_I2C2,
+	RDC_PER_I2C3,
+	RDC_PER_ROMCP,
+	RDC_PER_MMDC,
+	RDC_PER_ENET2,
+	RDC_PER_EIM,
+	RDC_PER_OCOTP,
+	RDC_PER_CSU,
+	RDC_PER_PERFMON1,
+	RDC_PER_PERFMON2,
+	RDC_PER_AXIMON,
+	RDC_PER_TZASC1,
+	RDC_PER_SAI1,
+	RDC_PER_AUDMUX,
+	RDC_PER_SAI2,
+	RDC_PER_QSPI1,
+	RDC_PER_QSPI2,
+	RDC_PER_UART2,
+	RDC_PER_UART3,
+	RDC_PER_UART4,
+	RDC_PER_UART5,
+	RDC_PER_I2C4,
+	RDC_PER_QOSC,
+	RDC_PER_CAAM,
+	RDC_PER_DAP,
+	RDC_PER_ADC1,
+	RDC_PER_ADC2,
+	RDC_PER_WDOG3,
+	RDC_PER_ECSPI5,
+	RDC_PER_SEMA4,
+	RDC_PER_MUPORT1,
+	RDC_PER_CANFD_CPU,
+	RDC_PER_MUPORT2,
+	RDC_PER_UART6,
+	RDC_PER_PWM5,
+	RDC_PER_PWM6,
+	RDC_PER_PWM7,
+	RDC_PER_PWM8,
+	RDC_PER_AIPSTZ3_GE0,
+	RDC_PER_AIPSTZ3_GE1,
+	RDC_PER_RESERVED1,
+	RDC_PER_SPDIF,
+	RDC_PER_ECSPI1,
+	RDC_PER_ECSPI2,
+	RDC_PER_ECSPI3,
+	RDC_PER_ECSPI4,
+	RDC_PER_RESERVED2,
+	RDC_PER_RESERVED3,
+	RDC_PER_UART1,
+	RDC_PER_ESAI,
+	RDC_PER_SSI1,
+	RDC_PER_SSI2,
+	RDC_PER_SSI3,
+	RDC_PER_ASRC,
+	RDC_PER_RESERVED4,
+	RDC_PER_SPBA_MA,
+	RDC_PER_GIS,
+	RDC_PER_DCIC1,
+	RDC_PER_DCIC2,
+	RDC_PER_CSI1,
+	RDC_PER_PXP,
+	RDC_PER_CSI2,
+	RDC_PER_LCDIF1,
+	RDC_PER_LCDIF2,
+	RDC_PER_VADC,
+	RDC_PER_VDEC,
+	RDC_PER_SPBA_DISPLAYMIX,
+};
+
+enum {
+	RDC_MA_A9_L2CACHE = 0,
+	RDC_MA_M4,
+	RDC_MA_GPU,
+	RDC_MA_CSI1,
+	RDC_MA_CSI2,
+	RDC_MA_LCDIF1,
+	RDC_MA_LCDIF2,
+	RDC_MA_PXP,
+	RDC_MA_PCIE_CTRL,
+	RDC_MA_DAP,
+	RDC_MA_CAAM,
+	RDC_MA_SDMA_PERI,
+	RDC_MA_SDMA_BURST,
+	RDC_MA_APBHDMA,
+	RDC_MA_RAWNAND,
+	RDC_MA_USDHC1,
+	RDC_MA_USDHC2,
+	RDC_MA_USDHC3,
+	RDC_MA_USDHC4,
+	RDC_MA_USB,
+	RDC_MA_MLB,
+	RDC_MA_TEST,
+	RDC_MA_ENET1_TX,
+	RDC_MA_ENET1_RX,
+	RDC_MA_ENET2_TX,
+	RDC_MA_ENET2_RX,
+	RDC_MA_SDMA,
+};
+
+#endif	/* __MX6SX_RDC_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h
new file mode 100644
index 000000000..99779588b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_MX6UL_DDR_H__
+#define __ASM_ARCH_MX6UL_DDR_H__
+
+#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
+#error "wrong CPU"
+#endif
+
+#define MX6_IOM_DRAM_DQM0	0x020e0244
+#define MX6_IOM_DRAM_DQM1	0x020e0248
+
+#define MX6_IOM_DRAM_RAS	0x020e024c
+#define MX6_IOM_DRAM_CAS	0x020e0250
+#define MX6_IOM_DRAM_CS0	0x020e0254
+#define MX6_IOM_DRAM_CS1	0x020e0258
+#define MX6_IOM_DRAM_SDWE_B	0x020e025c
+#define MX6_IOM_DRAM_SDODT0	0x020e0260
+#define MX6_IOM_DRAM_SDODT1	0x020e0264
+#define MX6_IOM_DRAM_SDBA0	0x020e0268
+#define MX6_IOM_DRAM_SDBA1	0x020e026c
+#define MX6_IOM_DRAM_SDBA2	0x020e0270
+#define MX6_IOM_DRAM_SDCKE0	0x020e0274
+#define MX6_IOM_DRAM_SDCKE1	0x020e0278
+#define MX6_IOM_DRAM_SDCLK_0	0x020e027c
+#define MX6_IOM_DRAM_SDQS0	0x020e0280
+#define MX6_IOM_DRAM_SDQS1	0x020e0284
+#define MX6_IOM_DRAM_RESET	0x020e0288
+
+#define MX6_IOM_GRP_ADDDS	0x020e0490
+#define MX6_IOM_DDRMODE_CTL	0x020e0494
+#define MX6_IOM_GRP_B0DS	0x020e0498
+#define MX6_IOM_GRP_DDRPK	0x020e049c
+#define MX6_IOM_GRP_CTLDS	0x020e04a0
+#define MX6_IOM_GRP_B1DS	0x020e04a4
+#define MX6_IOM_GRP_DDRHYS	0x020e04a8
+#define MX6_IOM_GRP_DDRPKE	0x020e04ac
+#define MX6_IOM_GRP_DDRMODE	0x020e04b0
+#define MX6_IOM_GRP_DDR_TYPE	0x020e04b4
+
+#endif	/*__ASM_ARCH_MX6SX_DDR_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ul_pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ul_pins.h
new file mode 100644
index 000000000..031b4a0a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ul_pins.h
@@ -0,0 +1,1064 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_IMX6UL_PINS_H__
+#define __ASM_ARCH_IMX6UL_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+
+	MX6_PAD_BOOT_MODE0__GPIO5_IO10	                        = IOMUX_PAD(0x02A0, 0x0014, 5, 0x0000, 0, 0),
+	MX6_PAD_BOOT_MODE1__GPIO5_IO11	                        = IOMUX_PAD(0x02A4, 0x0018, 5, 0x0000, 0, 0),
+	/*
+	 * The TAMPER Pin can be used for GPIO, which depends on
+	 * fusemap TAMPER_PIN_DISABLE[1:0] settings.
+	 */
+	MX6_PAD_SNVS_TAMPER0__GPIO5_IO00                       = IOMUX_PAD(0x02A8, 0x001C, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER1__GPIO5_IO01                       = IOMUX_PAD(0x02AC, 0x0020, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER2__GPIO5_IO02                       = IOMUX_PAD(0x02B0, 0x0024, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER3__GPIO5_IO03                       = IOMUX_PAD(0x02B4, 0x0028, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER4__GPIO5_IO04                       = IOMUX_PAD(0x02B8, 0x002C, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER5__GPIO5_IO05                       = IOMUX_PAD(0x02BC, 0x0030, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER6__GPIO5_IO06                       = IOMUX_PAD(0x02C0, 0x0034, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER7__GPIO5_IO07                       = IOMUX_PAD(0x02C4, 0x0038, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER8__GPIO5_IO08                       = IOMUX_PAD(0x02C8, 0x003C, 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER9__GPIO5_IO09                       = IOMUX_PAD(0x02CC, 0x0040, 5, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_MOD__SJC_MOD                              = IOMUX_PAD(0x02D0, 0x0044, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_MOD__GPT2_CLK                             = IOMUX_PAD(0x02D0, 0x0044, 1, 0x05A0, 0, 0),
+	MX6_PAD_JTAG_MOD__SPDIF_OUT                            = IOMUX_PAD(0x02D0, 0x0044, 2, 0x0000, 0, 0),
+	MX6_PAD_JTAG_MOD__ENET1_REF_CLK_25M                    = IOMUX_PAD(0x02D0, 0x0044, 3, 0x0000, 0, 0),
+	MX6_PAD_JTAG_MOD__CCM_PMIC_RDY                         = IOMUX_PAD(0x02D0, 0x0044, 4, 0x04C0, 0, 0),
+	MX6_PAD_JTAG_MOD__GPIO1_IO10                           = IOMUX_PAD(0x02D0, 0x0044, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_MOD__SDMA_EXT_EVENT00                     = IOMUX_PAD(0x02D0, 0x0044, 6, 0x0610, 0, 0),
+
+	MX6_PAD_JTAG_TMS__SJC_TMS                              = IOMUX_PAD(0x02D4, 0x0048, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TMS__GPT2_CAPTURE1                        = IOMUX_PAD(0x02D4, 0x0048, 1, 0x0598, 0, 0),
+	MX6_PAD_JTAG_TMS__SAI2_MCLK                            = IOMUX_PAD(0x02D4, 0x0048, 2, 0x05F0, 0, 0),
+	MX6_PAD_JTAG_TMS__CCM_CLKO1                            = IOMUX_PAD(0x02D4, 0x0048, 3, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TMS__CCM_WAIT                             = IOMUX_PAD(0x02D4, 0x0048, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TMS__GPIO1_IO11                           = IOMUX_PAD(0x02D4, 0x0048, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TMS__SDMA_EXT_EVENT01                     = IOMUX_PAD(0x02D4, 0x0048, 6, 0x0614, 0, 0),
+	MX6_PAD_JTAG_TMS__EPIT1_OUT                            = IOMUX_PAD(0x02D4, 0x0048, 8, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_TDO__SJC_TDO                              = IOMUX_PAD(0x02D8, 0x004C, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__GPT2_CAPTURE2                        = IOMUX_PAD(0x02D8, 0x004C, 1, 0x059C, 0, 0),
+	MX6_PAD_JTAG_TDO__SAI2_TX_SYNC                         = IOMUX_PAD(0x02D8, 0x004C, 2, 0x05FC, 0, 0),
+	MX6_PAD_JTAG_TDO__CCM_CLKO2                            = IOMUX_PAD(0x02D8, 0x004C, 3, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__CCM_STOP                             = IOMUX_PAD(0x02D8, 0x004C, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__GPIO1_IO12                           = IOMUX_PAD(0x02D8, 0x004C, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__MQS_RIGHT                            = IOMUX_PAD(0x02D8, 0x004C, 6, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__EPIT2_OUT                            = IOMUX_PAD(0x02D8, 0x004C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_TDI__SJC_TDI                              = IOMUX_PAD(0x02DC, 0x0050, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__GPT2_COMPARE1                        = IOMUX_PAD(0x02DC, 0x0050, 1, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__SAI2_TX_BCLK                         = IOMUX_PAD(0x02DC, 0x0050, 2, 0x05F8, 0, 0),
+	MX6_PAD_JTAG_TDI__PWM6_OUT                             = IOMUX_PAD(0x02DC, 0x0050, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__GPIO1_IO13                           = IOMUX_PAD(0x02DC, 0x0050, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__MQS_LEFT                             = IOMUX_PAD(0x02DC, 0x0050, 6, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__SIM1_POWER_FAIL                      = IOMUX_PAD(0x02DC, 0x0050, 8, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_TCK__SJC_TCK                              = IOMUX_PAD(0x02E0, 0x0054, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TCK__GPT2_COMPARE2                        = IOMUX_PAD(0x02E0, 0x0054, 1, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TCK__SAI2_RX_DATA                         = IOMUX_PAD(0x02E0, 0x0054, 2, 0x05F4, 0, 0),
+	MX6_PAD_JTAG_TCK__PWM7_OUT                             = IOMUX_PAD(0x02E0, 0x0054, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TCK__GPIO1_IO14                           = IOMUX_PAD(0x02E0, 0x0054, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TCK__SIM2_POWER_FAIL                      = IOMUX_PAD(0x02E0, 0x0054, 8, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_TRST_B__SJC_TRSTB                         = IOMUX_PAD(0x02E4, 0x0058, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__GPT2_COMPARE3                     = IOMUX_PAD(0x02E4, 0x0058, 1, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__SAI2_TX_DATA                      = IOMUX_PAD(0x02E4, 0x0058, 2, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__PWM8_OUT                          = IOMUX_PAD(0x02E4, 0x0058, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__GPIO1_IO15                        = IOMUX_PAD(0x02E4, 0x0058, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS                  = IOMUX_PAD(0x02E4, 0x0058, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO00__I2C2_SCL                           = IOMUX_PAD(0x02E8, 0x005C, IOMUX_CONFIG_SION | 0, 0x05AC, 1, 0),
+	MX6_PAD_GPIO1_IO00__GPT1_CAPTURE1                      = IOMUX_PAD(0x02E8, 0x005C, 1, 0x058C, 0, 0),
+	MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID                     = IOMUX_PAD(0x02E8, 0x005C, 2, 0x04B8, 0, 0),
+	MX6_PAD_GPIO1_IO00__ENET1_REF_CLK1                     = IOMUX_PAD(0x02E8, 0x005C, 3, 0x0574, 0, 0),
+	MX6_PAD_GPIO1_IO00__MQS_RIGHT                          = IOMUX_PAD(0x02E8, 0x005C, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO00__GPIO1_IO00                         = IOMUX_PAD(0x02E8, 0x005C, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN               = IOMUX_PAD(0x02E8, 0x005C, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO00__SRC_SYSTEM_RESET                   = IOMUX_PAD(0x02E8, 0x005C, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO00__WDOG3_WDOG_B                       = IOMUX_PAD(0x02E8, 0x005C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO01__I2C2_SDA                           = IOMUX_PAD(0x02EC, 0x0060, IOMUX_CONFIG_SION | 0, 0x05B0, 1, 0),
+	MX6_PAD_GPIO1_IO01__GPT1_COMPARE1                      = IOMUX_PAD(0x02EC, 0x0060, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__USB_OTG1_OC                        = IOMUX_PAD(0x02EC, 0x0060, 2, 0x0664, 0, 0),
+	MX6_PAD_GPIO1_IO01__ENET2_REF_CLK2                     = IOMUX_PAD(0x02EC, 0x0060, 3, 0x057C, 0, 0),
+	MX6_PAD_GPIO1_IO01__MQS_LEFT                           = IOMUX_PAD(0x02EC, 0x0060, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__GPIO1_IO01                         = IOMUX_PAD(0x02EC, 0x0060, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT              = IOMUX_PAD(0x02EC, 0x0060, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__SRC_EARLY_RESET                    = IOMUX_PAD(0x02EC, 0x0060, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__WDOG1_WDOG_B                       = IOMUX_PAD(0x02EC, 0x0060, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO02__I2C1_SCL                           = IOMUX_PAD(0x02F0, 0x0064, IOMUX_CONFIG_SION | 0, 0x05A4, 0, 0),
+	MX6_PAD_GPIO1_IO02__GPT1_COMPARE2                      = IOMUX_PAD(0x02F0, 0x0064, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__USB_OTG2_PWR                       = IOMUX_PAD(0x02F0, 0x0064, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__ENET1_REF_CLK_25M                  = IOMUX_PAD(0x02F0, 0x0064, 3, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__USDHC1_WP                          = IOMUX_PAD(0x02F0, 0x0064, 4, 0x066C, 0, 0),
+	MX6_PAD_GPIO1_IO02__GPIO1_IO02                         = IOMUX_PAD(0x02F0, 0x0064, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__SDMA_EXT_EVENT00                   = IOMUX_PAD(0x02F0, 0x0064, 6, 0x0610, 1, 0),
+	MX6_PAD_GPIO1_IO02__SRC_ANY_PU_RESET                   = IOMUX_PAD(0x02F0, 0x0064, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__UART1_DCE_TX                       = IOMUX_PAD(0x02F0, 0x0064, 8, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__UART1_DTE_RX                       = IOMUX_PAD(0x02F0, 0x0064, 8, 0x0624, 0, 0),
+
+	MX6_PAD_GPIO1_IO03__I2C1_SDA                           = IOMUX_PAD(0x02F4, 0x0068, IOMUX_CONFIG_SION | 0, 0x05A8, 1, 0),
+	MX6_PAD_GPIO1_IO03__GPT1_COMPARE3                      = IOMUX_PAD(0x02F4, 0x0068, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO03__USB_OTG2_OC                        = IOMUX_PAD(0x02F4, 0x0068, 2, 0x0660, 0, 0),
+	MX6_PAD_GPIO1_IO03__USDHC1_CD_B                        = IOMUX_PAD(0x02F4, 0x0068, 4, 0x0668, 0, 0),
+	MX6_PAD_GPIO1_IO03__GPIO1_IO03                         = IOMUX_PAD(0x02F4, 0x0068, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK                    = IOMUX_PAD(0x02F4, 0x0068, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO03__SRC_TESTER_ACK                     = IOMUX_PAD(0x02F4, 0x0068, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO03__UART1_DCE_RX                       = IOMUX_PAD(0x02F4, 0x0068, 8, 0x0624, 1, 0),
+	MX6_PAD_GPIO1_IO03__UART1_DTE_TX                       = IOMUX_PAD(0x02F4, 0x0068, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO04__ENET1_REF_CLK1                     = IOMUX_PAD(0x02F8, 0x006C, 0, 0x0574, 1, 0),
+	MX6_PAD_GPIO1_IO04__PWM3_OUT                           = IOMUX_PAD(0x02F8, 0x006C, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__USB_OTG1_PWR                       = IOMUX_PAD(0x02F8, 0x006C, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__USDHC1_RESET_B                     = IOMUX_PAD(0x02F8, 0x006C, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__GPIO1_IO04                         = IOMUX_PAD(0x02F8, 0x006C, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN               = IOMUX_PAD(0x02F8, 0x006C, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__UART5_DCE_TX                       = IOMUX_PAD(0x02F8, 0x006C, 8, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__UART5_DTE_RX                       = IOMUX_PAD(0x02F8, 0x006C, 8, 0x0644, 2, 0),
+
+	MX6_PAD_GPIO1_IO05__ENET2_REF_CLK2                     = IOMUX_PAD(0x02FC, 0x0070, 0, 0x057C, 1, 0),
+	MX6_PAD_GPIO1_IO05__PWM4_OUT                           = IOMUX_PAD(0x02FC, 0x0070, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID                     = IOMUX_PAD(0x02FC, 0x0070, 2, 0x04BC, 0, 0),
+	MX6_PAD_GPIO1_IO05__CSI_FIELD                          = IOMUX_PAD(0x02FC, 0x0070, 3, 0x0530, 0, 0),
+	MX6_PAD_GPIO1_IO05__USDHC1_VSELECT                     = IOMUX_PAD(0x02FC, 0x0070, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO05__GPIO1_IO05                         = IOMUX_PAD(0x02FC, 0x0070, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT              = IOMUX_PAD(0x02FC, 0x0070, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO05__UART5_DCE_RX                       = IOMUX_PAD(0x02FC, 0x0070, 8, 0x0644, 3, 0),
+	MX6_PAD_GPIO1_IO05__UART5_DTE_TX                       = IOMUX_PAD(0x02FC, 0x0070, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO06__ENET1_MDIO                         = IOMUX_PAD(0x0300, 0x0074, 0, 0x0578, 0, 0),
+	MX6_PAD_GPIO1_IO06__ENET2_MDIO                         = IOMUX_PAD(0x0300, 0x0074, 1, 0x0580, 0, 0),
+	MX6_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE                   = IOMUX_PAD(0x0300, 0x0074, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__CSI_MCLK                           = IOMUX_PAD(0x0300, 0x0074, 3, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__USDHC2_WP                          = IOMUX_PAD(0x0300, 0x0074, 4, 0x069C, 0, 0),
+	MX6_PAD_GPIO1_IO06__GPIO1_IO06                         = IOMUX_PAD(0x0300, 0x0074, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__CCM_WAIT                           = IOMUX_PAD(0x0300, 0x0074, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__CCM_REF_EN_B                       = IOMUX_PAD(0x0300, 0x0074, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__UART1_DCE_CTS                      = IOMUX_PAD(0x0300, 0x0074, 8, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__UART1_DTE_RTS                      = IOMUX_PAD(0x0300, 0x0074, 8, 0x0620, 0, 0),
+
+	MX6_PAD_GPIO1_IO07__ENET1_MDC                          = IOMUX_PAD(0x0304, 0x0078, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__ENET2_MDC                          = IOMUX_PAD(0x0304, 0x0078, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__USB_OTG_HOST_MODE                  = IOMUX_PAD(0x0304, 0x0078, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__CSI_PIXCLK                         = IOMUX_PAD(0x0304, 0x0078, 3, 0x0528, 0, 0),
+	MX6_PAD_GPIO1_IO07__USDHC2_CD_B                        = IOMUX_PAD(0x0304, 0x0078, 4, 0x0674, 1, 0),
+	MX6_PAD_GPIO1_IO07__GPIO1_IO07                         = IOMUX_PAD(0x0304, 0x0078, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__CCM_STOP                           = IOMUX_PAD(0x0304, 0x0078, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__UART1_DCE_RTS                      = IOMUX_PAD(0x0304, 0x0078, 8, 0x0620, 1, 0),
+	MX6_PAD_GPIO1_IO07__UART1_DTE_CTS                      = IOMUX_PAD(0x0304, 0x0078, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO08__PWM1_OUT                           = IOMUX_PAD(0x0308, 0x007C, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__WDOG1_WDOG_B                       = IOMUX_PAD(0x0308, 0x007C, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__SPDIF_OUT                          = IOMUX_PAD(0x0308, 0x007C, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__CSI_VSYNC                          = IOMUX_PAD(0x0308, 0x007C, 3, 0x052C, 1, 0),
+	MX6_PAD_GPIO1_IO08__USDHC2_VSELECT                     = IOMUX_PAD(0x0308, 0x007C, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__GPIO1_IO08                         = IOMUX_PAD(0x0308, 0x007C, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__CCM_PMIC_RDY                       = IOMUX_PAD(0x0308, 0x007C, 6, 0x04C0, 1, 0),
+	MX6_PAD_GPIO1_IO08__UART5_DCE_RTS                      = IOMUX_PAD(0x0308, 0x007C, 8, 0x0640, 1, 0),
+	MX6_PAD_GPIO1_IO08__UART5_DTE_CTS                      = IOMUX_PAD(0x0308, 0x007C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO09__PWM2_OUT                           = IOMUX_PAD(0x030C, 0x0080, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__WDOG1_WDOG_ANY                     = IOMUX_PAD(0x030C, 0x0080, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__SPDIF_IN                           = IOMUX_PAD(0x030C, 0x0080, 2, 0x0618, 0, 0),
+	MX6_PAD_GPIO1_IO09__CSI_HSYNC                          = IOMUX_PAD(0x030C, 0x0080, 3, 0x0524, 1, 0),
+	MX6_PAD_GPIO1_IO09__USDHC2_RESET_B                     = IOMUX_PAD(0x030C, 0x0080, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__GPIO1_IO09                         = IOMUX_PAD(0x030C, 0x0080, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__USDHC1_RESET_B                     = IOMUX_PAD(0x030C, 0x0080, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__UART5_DCE_CTS                      = IOMUX_PAD(0x030C, 0x0080, 8, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__UART5_DTE_RTS                      = IOMUX_PAD(0x030C, 0x0080, 8, 0x0640, 2, 0),
+
+	MX6_PAD_UART1_TX_DATA__UART1_DCE_TX                    = IOMUX_PAD(0x0310, 0x0084, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART1_TX_DATA__UART1_DTE_RX                    = IOMUX_PAD(0x0310, 0x0084, 0, 0x0624, 2, 0),
+	MX6_PAD_UART1_TX_DATA__ENET1_RDATA02                   = IOMUX_PAD(0x0310, 0x0084, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_TX_DATA__I2C3_SCL                        = IOMUX_PAD(0x0310, 0x0084, IOMUX_CONFIG_SION | 2, 0x05B4, 0, 0),
+	MX6_PAD_UART1_TX_DATA__CSI_DATA02                      = IOMUX_PAD(0x0310, 0x0084, 3, 0x04C4, 1, 0),
+	MX6_PAD_UART1_TX_DATA__GPT1_COMPARE1                   = IOMUX_PAD(0x0310, 0x0084, 4, 0x0000, 0, 0),
+	MX6_PAD_UART1_TX_DATA__GPIO1_IO16                      = IOMUX_PAD(0x0310, 0x0084, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_TX_DATA__SPDIF_OUT                       = IOMUX_PAD(0x0310, 0x0084, 8, 0x0000, 0, 0),
+
+	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX                    = IOMUX_PAD(0x0314, 0x0088, 0, 0x0624, 3, 0),
+
+	MX6_PAD_UART1_RX_DATA__UART1_DTE_TX                    = IOMUX_PAD(0x0314, 0x0088, 0, 0x0000, 0, 0),
+	MX6_PAD_UART1_RX_DATA__ENET1_RDATA03                   = IOMUX_PAD(0x0314, 0x0088, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_RX_DATA__I2C3_SDA                        = IOMUX_PAD(0x0314, 0x0088, IOMUX_CONFIG_SION | 2, 0x05B8, 0, 0),
+	MX6_PAD_UART1_RX_DATA__CSI_DATA03                      = IOMUX_PAD(0x0314, 0x0088, 3, 0x04C8, 1, 0),
+	MX6_PAD_UART1_RX_DATA__GPT1_CLK                        = IOMUX_PAD(0x0314, 0x0088, 4, 0x0594, 0, 0),
+	MX6_PAD_UART1_RX_DATA__GPIO1_IO17                      = IOMUX_PAD(0x0314, 0x0088, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_RX_DATA__SPDIF_IN                        = IOMUX_PAD(0x0314, 0x0088, 8, 0x0618, 1, 0),
+
+	MX6_PAD_UART1_CTS_B__UART1_DCE_CTS                     = IOMUX_PAD(0x0318, 0x008C, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART1_CTS_B__UART1_DTE_RTS                     = IOMUX_PAD(0x0318, 0x008C, 0, 0x0620, 2, 0),
+	MX6_PAD_UART1_CTS_B__ENET1_RX_CLK                      = IOMUX_PAD(0x0318, 0x008C, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_CTS_B__USDHC1_WP                         = IOMUX_PAD(0x0318, 0x008C, 2, 0x066C, 1, 0),
+	MX6_PAD_UART1_CTS_B__CSI_DATA04                        = IOMUX_PAD(0x0318, 0x008C, 3, 0x04D8, 0, 0),
+	MX6_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN              = IOMUX_PAD(0x0318, 0x008C, 4, 0x0000, 0, 0),
+	MX6_PAD_UART1_CTS_B__GPIO1_IO18                        = IOMUX_PAD(0x0318, 0x008C, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_CTS_B__USDHC2_WP                         = IOMUX_PAD(0x0318, 0x008C, 8, 0x069C, 1, 0),
+
+	MX6_PAD_UART1_RTS_B__UART1_DCE_RTS                     = IOMUX_PAD(0x031C, 0x0090, 0, 0x0620, 3, 0),
+
+	MX6_PAD_UART1_RTS_B__UART1_DTE_CTS                     = IOMUX_PAD(0x031C, 0x0090, 0, 0x0000, 0, 0),
+	MX6_PAD_UART1_RTS_B__ENET1_TX_ER                       = IOMUX_PAD(0x031C, 0x0090, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_RTS_B__USDHC1_CD_B                       = IOMUX_PAD(0x031C, 0x0090, 2, 0x0668, 1, 0),
+	MX6_PAD_UART1_RTS_B__CSI_DATA05                        = IOMUX_PAD(0x031C, 0x0090, 3, 0x04CC, 1, 0),
+	MX6_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT             = IOMUX_PAD(0x031C, 0x0090, 4, 0x0000, 0, 0),
+	MX6_PAD_UART1_RTS_B__GPIO1_IO19                        = IOMUX_PAD(0x031C, 0x0090, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_RTS_B__USDHC2_CD_B                       = IOMUX_PAD(0x031C, 0x0090, 8, 0x0674, 2, 0),
+
+	MX6_PAD_UART2_TX_DATA__UART2_DCE_TX                    = IOMUX_PAD(0x0320, 0x0094, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART2_TX_DATA__UART2_DTE_RX                    = IOMUX_PAD(0x0320, 0x0094, 0, 0x062C, 0, 0),
+	MX6_PAD_UART2_TX_DATA__ENET1_TDATA02                   = IOMUX_PAD(0x0320, 0x0094, 1, 0x0000, 0, 0),
+	MX6_PAD_UART2_TX_DATA__I2C4_SCL                        = IOMUX_PAD(0x0320, 0x0094, IOMUX_CONFIG_SION | 2, 0x05BC, 0, 0),
+	MX6_PAD_UART2_TX_DATA__CSI_DATA06                      = IOMUX_PAD(0x0320, 0x0094, 3, 0x04DC, 0, 0),
+	MX6_PAD_UART2_TX_DATA__GPT1_CAPTURE1                   = IOMUX_PAD(0x0320, 0x0094, 4, 0x058C, 1, 0),
+	MX6_PAD_UART2_TX_DATA__GPIO1_IO20                      = IOMUX_PAD(0x0320, 0x0094, 5, 0x0000, 0, 0),
+	MX6_PAD_UART2_TX_DATA__ECSPI3_SS0                      = IOMUX_PAD(0x0320, 0x0094, 8, 0x0560, 0, 0),
+
+	MX6_PAD_UART2_RX_DATA__UART2_DCE_RX                    = IOMUX_PAD(0x0324, 0x0098, 0, 0x062C, 1, 0),
+
+	MX6_PAD_UART2_RX_DATA__UART2_DTE_TX                    = IOMUX_PAD(0x0324, 0x0098, 0, 0x0000, 0, 0),
+	MX6_PAD_UART2_RX_DATA__ENET1_TDATA03                   = IOMUX_PAD(0x0324, 0x0098, 1, 0x0000, 0, 0),
+	MX6_PAD_UART2_RX_DATA__I2C4_SDA                        = IOMUX_PAD(0x0324, 0x0098, IOMUX_CONFIG_SION | 2, 0x05C0, 0, 0),
+	MX6_PAD_UART2_RX_DATA__CSI_DATA07                      = IOMUX_PAD(0x0324, 0x0098, 3, 0x04E0, 0, 0),
+	MX6_PAD_UART2_RX_DATA__GPT1_CAPTURE2                   = IOMUX_PAD(0x0324, 0x0098, 4, 0x0590, 0, 0),
+	MX6_PAD_UART2_RX_DATA__GPIO1_IO21                      = IOMUX_PAD(0x0324, 0x0098, 5, 0x0000, 0, 0),
+	MX6_PAD_UART2_RX_DATA__SJC_DONE                        = IOMUX_PAD(0x0324, 0x0098, 7, 0x0000, 0, 0),
+	MX6_PAD_UART2_RX_DATA__ECSPI3_SCLK                     = IOMUX_PAD(0x0324, 0x0098, 8, 0x0554, 0, 0),
+
+	MX6_PAD_UART2_CTS_B__UART2_DCE_CTS                     = IOMUX_PAD(0x0328, 0x009C, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART2_CTS_B__UART2_DTE_RTS                     = IOMUX_PAD(0x0328, 0x009C, 0, 0x0628, 0, 0),
+	MX6_PAD_UART2_CTS_B__ENET1_CRS                         = IOMUX_PAD(0x0328, 0x009C, 1, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__FLEXCAN2_TX                       = IOMUX_PAD(0x0328, 0x009C, 2, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__CSI_DATA08                        = IOMUX_PAD(0x0328, 0x009C, 3, 0x04E4, 0, 0),
+	MX6_PAD_UART2_CTS_B__GPT1_COMPARE2                     = IOMUX_PAD(0x0328, 0x009C, 4, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__GPIO1_IO22                        = IOMUX_PAD(0x0328, 0x009C, 5, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__SJC_DE_B                          = IOMUX_PAD(0x0328, 0x009C, 7, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__ECSPI3_MOSI                       = IOMUX_PAD(0x0328, 0x009C, 8, 0x055C, 0, 0),
+
+	MX6_PAD_UART2_RTS_B__UART2_DCE_RTS                     = IOMUX_PAD(0x032C, 0x00A0, 0, 0x0628, 1, 0),
+
+	MX6_PAD_UART2_RTS_B__UART2_DTE_CTS                     = IOMUX_PAD(0x032C, 0x00A0, 0, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__ENET1_COL                         = IOMUX_PAD(0x032C, 0x00A0, 1, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__FLEXCAN2_RX                       = IOMUX_PAD(0x032C, 0x00A0, 2, 0x0588, 0, 0),
+	MX6_PAD_UART2_RTS_B__CSI_DATA09                        = IOMUX_PAD(0x032C, 0x00A0, 3, 0x04E8, 0, 0),
+	MX6_PAD_UART2_RTS_B__GPT1_COMPARE3                     = IOMUX_PAD(0x032C, 0x00A0, 4, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__GPIO1_IO23                        = IOMUX_PAD(0x032C, 0x00A0, 5, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__SJC_FAIL                          = IOMUX_PAD(0x032C, 0x00A0, 7, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__ECSPI3_MISO                       = IOMUX_PAD(0x032C, 0x00A0, 8, 0x0558, 0, 0),
+
+	MX6_PAD_UART3_TX_DATA__UART3_DCE_TX                    = IOMUX_PAD(0x0330, 0x00A4, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART3_TX_DATA__UART3_DTE_RX                    = IOMUX_PAD(0x0330, 0x00A4, 0, 0x0634, 0, 0),
+	MX6_PAD_UART3_TX_DATA__ENET2_RDATA02                   = IOMUX_PAD(0x0330, 0x00A4, 1, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__SIM1_PORT0_PD                   = IOMUX_PAD(0x0330, 0x00A4, 2, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__CSI_DATA01                      = IOMUX_PAD(0x0330, 0x00A4, 3, 0x04D4, 0, 0),
+	MX6_PAD_UART3_TX_DATA__UART2_DCE_CTS                   = IOMUX_PAD(0x0330, 0x00A4, 4, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__UART2_DTE_RTS                   = IOMUX_PAD(0x0330, 0x00A4, 4, 0x0628, 2, 0),
+	MX6_PAD_UART3_TX_DATA__GPIO1_IO24                      = IOMUX_PAD(0x0330, 0x00A4, 5, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__SJC_JTAG_ACT                    = IOMUX_PAD(0x0330, 0x00A4, 7, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__ANATOP_OTG1_ID                  = IOMUX_PAD(0x0330, 0x00A4, 8, 0x04B8, 1, 0),
+
+	MX6_PAD_UART3_RX_DATA__UART3_DCE_RX                    = IOMUX_PAD(0x0334, 0x00A8, 0, 0x0634, 1, 0),
+
+	MX6_PAD_UART3_RX_DATA__UART3_DTE_TX                    = IOMUX_PAD(0x0334, 0x00A8, 0, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__ENET2_RDATA03                   = IOMUX_PAD(0x0334, 0x00A8, 1, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__SIM2_PORT0_PD                   = IOMUX_PAD(0x0334, 0x00A8, 2, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__CSI_DATA00                      = IOMUX_PAD(0x0334, 0x00A8, 3, 0x04D0, 0, 0),
+	MX6_PAD_UART3_RX_DATA__UART2_DCE_RTS                   = IOMUX_PAD(0x0334, 0x00A8, 4, 0x0628, 3, 0),
+	MX6_PAD_UART3_RX_DATA__UART2_DTE_CTS                   = IOMUX_PAD(0x0334, 0x00A8, 4, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__GPIO1_IO25                      = IOMUX_PAD(0x0334, 0x00A8, 5, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__EPIT1_OUT                       = IOMUX_PAD(0x0334, 0x00A8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_UART3_CTS_B__UART3_DCE_CTS                     = IOMUX_PAD(0x0338, 0x00AC, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART3_CTS_B__UART3_DTE_RTS                     = IOMUX_PAD(0x0338, 0x00AC, 0, 0x0630, 0, 0),
+	MX6_PAD_UART3_CTS_B__ENET2_RX_CLK                      = IOMUX_PAD(0x0338, 0x00AC, IOMUX_CONFIG_SION | 1, 0x0000, 0, 0),
+	MX6_PAD_UART3_CTS_B__FLEXCAN1_TX                       = IOMUX_PAD(0x0338, 0x00AC, 2, 0x0000, 0, 0),
+	MX6_PAD_UART3_CTS_B__CSI_DATA10                        = IOMUX_PAD(0x0338, 0x00AC, 3, 0x04EC, 0, 0),
+	MX6_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN              = IOMUX_PAD(0x0338, 0x00AC, 4, 0x0000, 0, 0),
+	MX6_PAD_UART3_CTS_B__GPIO1_IO26                        = IOMUX_PAD(0x0338, 0x00AC, 5, 0x0000, 0, 0),
+	MX6_PAD_UART3_CTS_B__EPIT2_OUT                         = IOMUX_PAD(0x0338, 0x00AC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_UART3_RTS_B__UART3_DCE_RTS                     = IOMUX_PAD(0x033C, 0x00B0, 0, 0x0630, 1, 0),
+
+	MX6_PAD_UART3_RTS_B__UART3_DTE_CTS                     = IOMUX_PAD(0x033C, 0x00B0, 0, 0x0000, 0, 0),
+	MX6_PAD_UART3_RTS_B__ENET2_TX_ER                       = IOMUX_PAD(0x033C, 0x00B0, 1, 0x0000, 0, 0),
+	MX6_PAD_UART3_RTS_B__FLEXCAN1_RX                       = IOMUX_PAD(0x033C, 0x00B0, 2, 0x0584, 0, 0),
+	MX6_PAD_UART3_RTS_B__CSI_DATA11                        = IOMUX_PAD(0x033C, 0x00B0, 3, 0x04F0, 0, 0),
+	MX6_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT             = IOMUX_PAD(0x033C, 0x00B0, 4, 0x0000, 0, 0),
+	MX6_PAD_UART3_RTS_B__GPIO1_IO27                        = IOMUX_PAD(0x033C, 0x00B0, 5, 0x0000, 0, 0),
+	MX6_PAD_UART3_RTS_B__WDOG1_WDOG_B                      = IOMUX_PAD(0x033C, 0x00B0, 8, 0x0000, 0, 0),
+
+	MX6_PAD_UART4_TX_DATA__UART4_DCE_TX                    = IOMUX_PAD(0x0340, 0x00B4, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART4_TX_DATA__UART4_DTE_RX                    = IOMUX_PAD(0x0340, 0x00B4, 0, 0x063C, 0, 0),
+	MX6_PAD_UART4_TX_DATA__ENET2_TDATA02                   = IOMUX_PAD(0x0340, 0x00B4, 1, 0x0000, 0, 0),
+	MX6_PAD_UART4_TX_DATA__I2C1_SCL                        = IOMUX_PAD(0x0340, 0x00B4, IOMUX_CONFIG_SION | 2, 0x05A4, 1, 0),
+	MX6_PAD_UART4_TX_DATA__CSI_DATA12                      = IOMUX_PAD(0x0340, 0x00B4, 3, 0x04F4, 0, 0),
+	MX6_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02             = IOMUX_PAD(0x0340, 0x00B4, 4, 0x0000, 0, 0),
+	MX6_PAD_UART4_TX_DATA__GPIO1_IO28                      = IOMUX_PAD(0x0340, 0x00B4, 5, 0x0000, 0, 0),
+	MX6_PAD_UART4_TX_DATA__ECSPI2_SCLK                     = IOMUX_PAD(0x0340, 0x00B4, 8, 0x0544, 1, 0),
+
+	MX6_PAD_UART4_RX_DATA__UART4_DCE_RX                    = IOMUX_PAD(0x0344, 0x00B8, 0, 0x063C, 1, 0),
+
+	MX6_PAD_UART4_RX_DATA__UART4_DTE_TX                    = IOMUX_PAD(0x0344, 0x00B8, 0, 0x0000, 0, 0),
+	MX6_PAD_UART4_RX_DATA__ENET2_TDATA03                   = IOMUX_PAD(0x0344, 0x00B8, 1, 0x0000, 0, 0),
+	MX6_PAD_UART4_RX_DATA__I2C1_SDA                        = IOMUX_PAD(0x0344, 0x00B8, IOMUX_CONFIG_SION | 2, 0x05A8, 2, 0),
+	MX6_PAD_UART4_RX_DATA__CSI_DATA13                      = IOMUX_PAD(0x0344, 0x00B8, 3, 0x04F8, 0, 0),
+	MX6_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01             = IOMUX_PAD(0x0344, 0x00B8, 4, 0x0000, 0, 0),
+	MX6_PAD_UART4_RX_DATA__GPIO1_IO29                      = IOMUX_PAD(0x0344, 0x00B8, 5, 0x0000, 0, 0),
+	MX6_PAD_UART4_RX_DATA__ECSPI2_SS0                      = IOMUX_PAD(0x0344, 0x00B8, 8, 0x0550, 1, 0),
+	MX6_PAD_UART5_TX_DATA__GPIO1_IO30                      = IOMUX_PAD(0x0348, 0x00BC, 5, 0x0000, 0, 0),
+	MX6_PAD_UART5_TX_DATA__ECSPI2_MOSI                     = IOMUX_PAD(0x0348, 0x00BC, 8, 0x054C, 0, 0),
+
+	MX6_PAD_UART5_TX_DATA__UART5_DCE_TX                    = IOMUX_PAD(0x0348, 0x00BC, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART5_TX_DATA__UART5_DTE_RX                    = IOMUX_PAD(0x0348, 0x00BC, 0, 0x0644, 4, 0),
+	MX6_PAD_UART5_TX_DATA__ENET2_CRS                       = IOMUX_PAD(0x0348, 0x00BC, 1, 0x0000, 0, 0),
+	MX6_PAD_UART5_TX_DATA__I2C2_SCL                        = IOMUX_PAD(0x0348, 0x00BC, IOMUX_CONFIG_SION | 2, 0x05AC, 2, 0),
+	MX6_PAD_UART5_TX_DATA__CSI_DATA14                      = IOMUX_PAD(0x0348, 0x00BC, 3, 0x04FC, 0, 0),
+	MX6_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00             = IOMUX_PAD(0x0348, 0x00BC, 4, 0x0000, 0, 0),
+
+	MX6_PAD_UART5_RX_DATA__UART5_DCE_RX                    = IOMUX_PAD(0x034C, 0x00C0, 0, 0x0644, 5, 0),
+
+	MX6_PAD_UART5_RX_DATA__UART5_DTE_TX                    = IOMUX_PAD(0x034C, 0x00C0, 0, 0x0000, 0, 0),
+	MX6_PAD_UART5_RX_DATA__ENET2_COL                       = IOMUX_PAD(0x034C, 0x00C0, 1, 0x0000, 0, 0),
+	MX6_PAD_UART5_RX_DATA__I2C2_SDA                        = IOMUX_PAD(0x034C, 0x00C0, IOMUX_CONFIG_SION | 2, 0x05B0, 2, 0),
+	MX6_PAD_UART5_RX_DATA__CSI_DATA15                      = IOMUX_PAD(0x034C, 0x00C0, 3, 0x0500, 0, 0),
+	MX6_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB                 = IOMUX_PAD(0x034C, 0x00C0, 4, 0x0000, 0, 0),
+	MX6_PAD_UART5_RX_DATA__GPIO1_IO31                      = IOMUX_PAD(0x034C, 0x00C0, 5, 0x0000, 0, 0),
+	MX6_PAD_UART5_RX_DATA__ECSPI2_MISO                     = IOMUX_PAD(0x034C, 0x00C0, 8, 0x0548, 1, 0),
+
+	MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00                  = IOMUX_PAD(0x0350, 0x00C4, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__UART4_DCE_RTS                  = IOMUX_PAD(0x0350, 0x00C4, 1, 0x0638, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__UART4_DTE_CTS                  = IOMUX_PAD(0x0350, 0x00C4, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__PWM1_OUT                       = IOMUX_PAD(0x0350, 0x00C4, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__CSI_DATA16                     = IOMUX_PAD(0x0350, 0x00C4, 3, 0x0504, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__FLEXCAN1_TX                    = IOMUX_PAD(0x0350, 0x00C4, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__GPIO2_IO00                     = IOMUX_PAD(0x0350, 0x00C4, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__KPP_ROW00                      = IOMUX_PAD(0x0350, 0x00C4, 6, 0x05D0, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__USDHC1_LCTL                    = IOMUX_PAD(0x0350, 0x00C4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01                  = IOMUX_PAD(0x0354, 0x00C8, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__UART4_DCE_CTS                  = IOMUX_PAD(0x0354, 0x00C8, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__UART4_DTE_RTS                  = IOMUX_PAD(0x0354, 0x00C8, 1, 0x0638, 1, 0),
+	MX6_PAD_ENET1_RX_DATA1__PWM2_OUT                       = IOMUX_PAD(0x0354, 0x00C8, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__CSI_DATA17                     = IOMUX_PAD(0x0354, 0x00C8, 3, 0x0508, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__FLEXCAN1_RX                    = IOMUX_PAD(0x0354, 0x00C8, 4, 0x0584, 1, 0),
+	MX6_PAD_ENET1_RX_DATA1__GPIO2_IO01                     = IOMUX_PAD(0x0354, 0x00C8, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__KPP_COL00                      = IOMUX_PAD(0x0354, 0x00C8, 6, 0x05C4, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__USDHC2_LCTL                    = IOMUX_PAD(0x0354, 0x00C8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_RX_EN__ENET1_RX_EN                       = IOMUX_PAD(0x0358, 0x00CC, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_EN__UART5_DCE_RTS                     = IOMUX_PAD(0x0358, 0x00CC, 1, 0x0640, 3, 0),
+	MX6_PAD_ENET1_RX_EN__UART5_DTE_CTS                     = IOMUX_PAD(0x0358, 0x00CC, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_EN__CSI_DATA18                        = IOMUX_PAD(0x0358, 0x00CC, 3, 0x050C, 0, 0),
+	MX6_PAD_ENET1_RX_EN__FLEXCAN2_TX                       = IOMUX_PAD(0x0358, 0x00CC, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_EN__GPIO2_IO02                        = IOMUX_PAD(0x0358, 0x00CC, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_EN__KPP_ROW01                         = IOMUX_PAD(0x0358, 0x00CC, 6, 0x05D4, 0, 0),
+	MX6_PAD_ENET1_RX_EN__USDHC1_VSELECT                    = IOMUX_PAD(0x0358, 0x00CC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00                  = IOMUX_PAD(0x035C, 0x00D0, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__UART5_DCE_CTS                  = IOMUX_PAD(0x035C, 0x00D0, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  = IOMUX_PAD(0x035C, 0x00D0, 1, 0x0640, 4, 0),
+	MX6_PAD_ENET1_TX_DATA0__CSI_DATA19                     = IOMUX_PAD(0x035C, 0x00D0, 3, 0x0510, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__FLEXCAN2_RX                    = IOMUX_PAD(0x035C, 0x00D0, 4, 0x0588, 1, 0),
+	MX6_PAD_ENET1_TX_DATA0__GPIO2_IO03                     = IOMUX_PAD(0x035C, 0x00D0, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__KPP_COL01                      = IOMUX_PAD(0x035C, 0x00D0, 6, 0x05C8, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__USDHC2_VSELECT                 = IOMUX_PAD(0x035C, 0x00D0, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01                  = IOMUX_PAD(0x0360, 0x00D4, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__UART6_DCE_CTS                  = IOMUX_PAD(0x0360, 0x00D4, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__UART6_DTE_RTS                  = IOMUX_PAD(0x0360, 0x00D4, 1, 0x0648, 2, 0),
+	MX6_PAD_ENET1_TX_DATA1__PWM5_OUT                       = IOMUX_PAD(0x0360, 0x00D4, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__CSI_DATA20                     = IOMUX_PAD(0x0360, 0x00D4, 3, 0x0514, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__ENET2_MDIO                     = IOMUX_PAD(0x0360, 0x00D4, 4, 0x0580, 1, 0),
+	MX6_PAD_ENET1_TX_DATA1__GPIO2_IO04                     = IOMUX_PAD(0x0360, 0x00D4, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__KPP_ROW02                      = IOMUX_PAD(0x0360, 0x00D4, 6, 0x05D8, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB           = IOMUX_PAD(0x0360, 0x00D4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_TX_EN__ENET1_TX_EN                       = IOMUX_PAD(0x0364, 0x00D8, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__UART6_DCE_RTS                     = IOMUX_PAD(0x0364, 0x00D8, 1, 0x0648, 3, 0),
+	MX6_PAD_ENET1_TX_EN__UART6_DTE_CTS                     = IOMUX_PAD(0x0364, 0x00D8, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__PWM6_OUT                          = IOMUX_PAD(0x0364, 0x00D8, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__CSI_DATA21                        = IOMUX_PAD(0x0364, 0x00D8, 3, 0x0518, 0, 0),
+	MX6_PAD_ENET1_TX_EN__ENET2_MDC                         = IOMUX_PAD(0x0364, 0x00D8, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__GPIO2_IO05                        = IOMUX_PAD(0x0364, 0x00D8, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__KPP_COL02                         = IOMUX_PAD(0x0364, 0x00D8, 6, 0x05CC, 0, 0),
+	MX6_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB              = IOMUX_PAD(0x0364, 0x00D8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_TX_CLK__ENET1_TX_CLK                     = IOMUX_PAD(0x0368, 0x00DC, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__UART7_DCE_CTS                    = IOMUX_PAD(0x0368, 0x00DC, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__UART7_DTE_RTS                    = IOMUX_PAD(0x0368, 0x00DC, 1, 0x0650, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__PWM7_OUT                         = IOMUX_PAD(0x0368, 0x00DC, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__CSI_DATA22                       = IOMUX_PAD(0x0368, 0x00DC, 3, 0x051C, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                   = IOMUX_PAD(0x0368, 0x00DC, IOMUX_CONFIG_SION | 4, 0x0574, 2, 0),
+	MX6_PAD_ENET1_TX_CLK__GPIO2_IO06                       = IOMUX_PAD(0x0368, 0x00DC, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__KPP_ROW03                        = IOMUX_PAD(0x0368, 0x00DC, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__GPT1_CLK                         = IOMUX_PAD(0x0368, 0x00DC, 8, 0x0594, 1, 0),
+
+	MX6_PAD_ENET1_RX_ER__ENET1_RX_ER                       = IOMUX_PAD(0x036C, 0x00E0, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__UART7_DCE_RTS                     = IOMUX_PAD(0x036C, 0x00E0, 1, 0x0650, 1, 0),
+	MX6_PAD_ENET1_RX_ER__UART7_DTE_CTS                     = IOMUX_PAD(0x036C, 0x00E0, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__PWM8_OUT                          = IOMUX_PAD(0x036C, 0x00E0, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__CSI_DATA23                        = IOMUX_PAD(0x036C, 0x00E0, 3, 0x0520, 0, 0),
+	MX6_PAD_ENET1_RX_ER__EIM_CRE                           = IOMUX_PAD(0x036C, 0x00E0, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__GPIO2_IO07                        = IOMUX_PAD(0x036C, 0x00E0, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__KPP_COL03                         = IOMUX_PAD(0x036C, 0x00E0, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__GPT1_CAPTURE2                     = IOMUX_PAD(0x036C, 0x00E0, 8, 0x0590, 1, 0),
+
+	MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00                  = IOMUX_PAD(0x0370, 0x00E4, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__UART6_DCE_TX                   = IOMUX_PAD(0x0370, 0x00E4, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__UART6_DTE_RX                   = IOMUX_PAD(0x0370, 0x00E4, 1, 0x064C, 1, 0),
+	MX6_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD                = IOMUX_PAD(0x0370, 0x00E4, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__I2C3_SCL                       = IOMUX_PAD(0x0370, 0x00E4, IOMUX_CONFIG_SION | 3, 0x05B4, 1, 0),
+	MX6_PAD_ENET2_RX_DATA0__ENET1_MDIO                     = IOMUX_PAD(0x0370, 0x00E4, 4, 0x0578, 1, 0),
+	MX6_PAD_ENET2_RX_DATA0__GPIO2_IO08                     = IOMUX_PAD(0x0370, 0x00E4, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__KPP_ROW04                      = IOMUX_PAD(0x0370, 0x00E4, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__USB_OTG1_PWR                   = IOMUX_PAD(0x0370, 0x00E4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01                  = IOMUX_PAD(0x0374, 0x00E8, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__UART6_DCE_RX                   = IOMUX_PAD(0x0374, 0x00E8, 1, 0x064C, 2, 0),
+	MX6_PAD_ENET2_RX_DATA1__UART6_DTE_TX                   = IOMUX_PAD(0x0374, 0x00E8, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK                 = IOMUX_PAD(0x0374, 0x00E8, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__I2C3_SDA                       = IOMUX_PAD(0x0374, 0x00E8, IOMUX_CONFIG_SION | 3, 0x05B8, 1, 0),
+	MX6_PAD_ENET2_RX_DATA1__ENET1_MDC                      = IOMUX_PAD(0x0374, 0x00E8, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__GPIO2_IO09                     = IOMUX_PAD(0x0374, 0x00E8, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__KPP_COL04                      = IOMUX_PAD(0x0374, 0x00E8, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__USB_OTG1_OC                    = IOMUX_PAD(0x0374, 0x00E8, 8, 0x0664, 1, 0),
+
+	MX6_PAD_ENET2_RX_EN__ENET2_RX_EN                       = IOMUX_PAD(0x0378, 0x00EC, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__UART7_DCE_TX                      = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__UART7_DTE_RX                      = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0654, 0, 0),
+	MX6_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B                  = IOMUX_PAD(0x0378, 0x00EC, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__I2C4_SCL                          = IOMUX_PAD(0x0378, 0x00EC, IOMUX_CONFIG_SION | 3, 0x05BC, 1, 0),
+	MX6_PAD_ENET2_RX_EN__EIM_ADDR26                        = IOMUX_PAD(0x0378, 0x00EC, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__GPIO2_IO10                        = IOMUX_PAD(0x0378, 0x00EC, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__KPP_ROW05                         = IOMUX_PAD(0x0378, 0x00EC, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M                 = IOMUX_PAD(0x0378, 0x00EC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00                  = IOMUX_PAD(0x037C, 0x00F0, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX                   = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0654, 1, 0),
+	MX6_PAD_ENET2_TX_DATA0__UART7_DTE_TX                   = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN                = IOMUX_PAD(0x037C, 0x00F0, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__I2C4_SDA                       = IOMUX_PAD(0x037C, 0x00F0, IOMUX_CONFIG_SION | 3, 0x05C0, 1, 0),
+	MX6_PAD_ENET2_TX_DATA0__EIM_EB_B02                     = IOMUX_PAD(0x037C, 0x00F0, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__GPIO2_IO11                     = IOMUX_PAD(0x037C, 0x00F0, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__KPP_COL05                      = IOMUX_PAD(0x037C, 0x00F0, 6, 0x0000, 0, 0),
+
+	MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01                  = IOMUX_PAD(0x0380, 0x00F4, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__UART8_DCE_TX                   = IOMUX_PAD(0x0380, 0x00F4, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__UART8_DTE_RX                   = IOMUX_PAD(0x0380, 0x00F4, 1, 0x065C, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD                = IOMUX_PAD(0x0380, 0x00F4, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__ECSPI4_SCLK                    = IOMUX_PAD(0x0380, 0x00F4, 3, 0x0564, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__EIM_EB_B03                     = IOMUX_PAD(0x0380, 0x00F4, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__GPIO2_IO12                     = IOMUX_PAD(0x0380, 0x00F4, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__KPP_ROW06                      = IOMUX_PAD(0x0380, 0x00F4, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__USB_OTG2_PWR                   = IOMUX_PAD(0x0380, 0x00F4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET2_TX_EN__ENET2_TX_EN                       = IOMUX_PAD(0x0384, 0x00F8, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__UART8_DCE_RX                      = IOMUX_PAD(0x0384, 0x00F8, 1, 0x065C, 1, 0),
+	MX6_PAD_ENET2_TX_EN__UART8_DTE_TX                      = IOMUX_PAD(0x0384, 0x00F8, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__SIM2_PORT0_CLK                    = IOMUX_PAD(0x0384, 0x00F8, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__ECSPI4_MOSI                       = IOMUX_PAD(0x0384, 0x00F8, 3, 0x056C, 0, 0),
+	MX6_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN                  = IOMUX_PAD(0x0384, 0x00F8, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__GPIO2_IO13                        = IOMUX_PAD(0x0384, 0x00F8, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__KPP_COL06                         = IOMUX_PAD(0x0384, 0x00F8, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__USB_OTG2_OC                       = IOMUX_PAD(0x0384, 0x00F8, 8, 0x0660, 1, 0),
+
+	MX6_PAD_ENET2_TX_CLK__ENET2_TX_CLK                     = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__UART8_DCE_CTS                    = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__UART8_DTE_RTS                    = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0658, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B                 = IOMUX_PAD(0x0388, 0x00FC, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__ECSPI4_MISO                      = IOMUX_PAD(0x0388, 0x00FC, 3, 0x0568, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                   = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 4, 0x057C, 2, 0),
+	MX6_PAD_ENET2_TX_CLK__GPIO2_IO14                       = IOMUX_PAD(0x0388, 0x00FC, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__KPP_ROW07                        = IOMUX_PAD(0x0388, 0x00FC, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID                   = IOMUX_PAD(0x0388, 0x00FC, 8, 0x04BC, 1, 0),
+
+	MX6_PAD_ENET2_RX_ER__ENET2_RX_ER                       = IOMUX_PAD(0x038C, 0x0100, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__UART8_DCE_RTS                     = IOMUX_PAD(0x038C, 0x0100, 1, 0x0658, 1, 0),
+	MX6_PAD_ENET2_RX_ER__UART8_DTE_CTS                     = IOMUX_PAD(0x038C, 0x0100, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN                   = IOMUX_PAD(0x038C, 0x0100, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__ECSPI4_SS0                        = IOMUX_PAD(0x038C, 0x0100, 3, 0x0570, 0, 0),
+	MX6_PAD_ENET2_RX_ER__EIM_ADDR25                        = IOMUX_PAD(0x038C, 0x0100, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__GPIO2_IO15                        = IOMUX_PAD(0x038C, 0x0100, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__KPP_COL07                         = IOMUX_PAD(0x038C, 0x0100, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY                    = IOMUX_PAD(0x038C, 0x0100, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_CLK__LCDIF_CLK                             = IOMUX_PAD(0x0390, 0x0104, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__LCDIF_WR_RWN                          = IOMUX_PAD(0x0390, 0x0104, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__UART4_DCE_TX                          = IOMUX_PAD(0x0390, 0x0104, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__UART4_DTE_RX                          = IOMUX_PAD(0x0390, 0x0104, 2, 0x063C, 2, 0),
+	MX6_PAD_LCD_CLK__SAI3_MCLK                             = IOMUX_PAD(0x0390, 0x0104, 3, 0x0600, 0, 0),
+	MX6_PAD_LCD_CLK__EIM_CS2_B                             = IOMUX_PAD(0x0390, 0x0104, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__GPIO3_IO00                            = IOMUX_PAD(0x0390, 0x0104, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB                  = IOMUX_PAD(0x0390, 0x0104, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_ENABLE__LCDIF_ENABLE                       = IOMUX_PAD(0x0394, 0x0108, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__LCDIF_RD_E                         = IOMUX_PAD(0x0394, 0x0108, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__UART4_DCE_RX                       = IOMUX_PAD(0x0394, 0x0108, 2, 0x063C, 3, 0),
+	MX6_PAD_LCD_ENABLE__UART4_DTE_TX                       = IOMUX_PAD(0x0394, 0x0108, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__SAI3_TX_SYNC                       = IOMUX_PAD(0x0394, 0x0108, 3, 0x060C, 0, 0),
+	MX6_PAD_LCD_ENABLE__EIM_CS3_B                          = IOMUX_PAD(0x0394, 0x0108, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__GPIO3_IO01                         = IOMUX_PAD(0x0394, 0x0108, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__ECSPI2_RDY                         = IOMUX_PAD(0x0394, 0x0108, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_HSYNC__LCDIF_HSYNC                         = IOMUX_PAD(0x0398, 0x010C, 0, 0x05DC, 0, 0),
+	MX6_PAD_LCD_HSYNC__LCDIF_RS                            = IOMUX_PAD(0x0398, 0x010C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__UART4_DCE_CTS                       = IOMUX_PAD(0x0398, 0x010C, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__UART4_DTE_RTS                       = IOMUX_PAD(0x0398, 0x010C, 2, 0x0638, 2, 0),
+	MX6_PAD_LCD_HSYNC__SAI3_TX_BCLK                        = IOMUX_PAD(0x0398, 0x010C, 3, 0x0608, 0, 0),
+	MX6_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB                = IOMUX_PAD(0x0398, 0x010C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__GPIO3_IO02                          = IOMUX_PAD(0x0398, 0x010C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__ECSPI2_SS1                          = IOMUX_PAD(0x0398, 0x010C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_VSYNC__LCDIF_VSYNC                         = IOMUX_PAD(0x039C, 0x0110, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__LCDIF_BUSY                          = IOMUX_PAD(0x039C, 0x0110, 1, 0x05DC, 1, 0),
+	MX6_PAD_LCD_VSYNC__UART4_DCE_RTS                       = IOMUX_PAD(0x039C, 0x0110, 2, 0x0638, 3, 0),
+	MX6_PAD_LCD_VSYNC__UART4_DTE_CTS                       = IOMUX_PAD(0x039C, 0x0110, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__SAI3_RX_DATA                        = IOMUX_PAD(0x039C, 0x0110, 3, 0x0604, 0, 0),
+	MX6_PAD_LCD_VSYNC__WDOG2_WDOG_B                        = IOMUX_PAD(0x039C, 0x0110, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__GPIO3_IO03                          = IOMUX_PAD(0x039C, 0x0110, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__ECSPI2_SS2                          = IOMUX_PAD(0x039C, 0x0110, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_RESET__LCDIF_RESET                         = IOMUX_PAD(0x03A0, 0x0114, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__LCDIF_CS                            = IOMUX_PAD(0x03A0, 0x0114, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__CA7_MX6UL_EVENTI                    = IOMUX_PAD(0x03A0, 0x0114, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__SAI3_TX_DATA                        = IOMUX_PAD(0x03A0, 0x0114, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__WDOG1_WDOG_ANY                      = IOMUX_PAD(0x03A0, 0x0114, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__GPIO3_IO04                          = IOMUX_PAD(0x03A0, 0x0114, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__ECSPI2_SS3                          = IOMUX_PAD(0x03A0, 0x0114, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA00__LCDIF_DATA00                       = IOMUX_PAD(0x03A4, 0x0118, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__PWM1_OUT                           = IOMUX_PAD(0x03A4, 0x0118, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN               = IOMUX_PAD(0x03A4, 0x0118, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__I2C3_SDA                           = IOMUX_PAD(0x03A4, 0x0118, IOMUX_CONFIG_SION | 4, 0x05B8, 2, 0),
+	MX6_PAD_LCD_DATA00__GPIO3_IO05                         = IOMUX_PAD(0x03A4, 0x0118, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__SRC_BT_CFG00                       = IOMUX_PAD(0x03A4, 0x0118, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__SAI1_MCLK                          = IOMUX_PAD(0x03A4, 0x0118, 8, 0x05E0, 1, 0),
+
+	MX6_PAD_LCD_DATA01__LCDIF_DATA01                       = IOMUX_PAD(0x03A8, 0x011C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__PWM2_OUT                           = IOMUX_PAD(0x03A8, 0x011C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT              = IOMUX_PAD(0x03A8, 0x011C, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__I2C3_SCL                           = IOMUX_PAD(0x03A8, 0x011C, IOMUX_CONFIG_SION | 4, 0x05B4, 2, 0),
+	MX6_PAD_LCD_DATA01__GPIO3_IO06                         = IOMUX_PAD(0x03A8, 0x011C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__SRC_BT_CFG01                       = IOMUX_PAD(0x03A8, 0x011C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__SAI1_TX_SYNC                       = IOMUX_PAD(0x03A8, 0x011C, 8, 0x05EC, 0, 0),
+
+	MX6_PAD_LCD_DATA02__LCDIF_DATA02                       = IOMUX_PAD(0x03AC, 0x0120, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__PWM3_OUT                           = IOMUX_PAD(0x03AC, 0x0120, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN               = IOMUX_PAD(0x03AC, 0x0120, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__I2C4_SDA                           = IOMUX_PAD(0x03AC, 0x0120, IOMUX_CONFIG_SION | 4, 0x05C0, 2, 0),
+	MX6_PAD_LCD_DATA02__GPIO3_IO07                         = IOMUX_PAD(0x03AC, 0x0120, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__SRC_BT_CFG02                       = IOMUX_PAD(0x03AC, 0x0120, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__SAI1_TX_BCLK                       = IOMUX_PAD(0x03AC, 0x0120, 8, 0x05E8, 0, 0),
+
+	MX6_PAD_LCD_DATA03__LCDIF_DATA03                       = IOMUX_PAD(0x03B0, 0x0124, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__PWM4_OUT                           = IOMUX_PAD(0x03B0, 0x0124, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT              = IOMUX_PAD(0x03B0, 0x0124, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__I2C4_SCL                           = IOMUX_PAD(0x03B0, 0x0124, IOMUX_CONFIG_SION | 4, 0x05BC, 2, 0),
+	MX6_PAD_LCD_DATA03__GPIO3_IO08                         = IOMUX_PAD(0x03B0, 0x0124, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__SRC_BT_CFG03                       = IOMUX_PAD(0x03B0, 0x0124, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__SAI1_RX_DATA                       = IOMUX_PAD(0x03B0, 0x0124, 8, 0x05E4, 0, 0),
+
+	MX6_PAD_LCD_DATA04__LCDIF_DATA04                       = IOMUX_PAD(0x03B4, 0x0128, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__UART8_DCE_CTS                      = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__UART8_DTE_RTS                      = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0658, 2, 0),
+	MX6_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN               = IOMUX_PAD(0x03B4, 0x0128, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__SPDIF_SR_CLK                       = IOMUX_PAD(0x03B4, 0x0128, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__GPIO3_IO09                         = IOMUX_PAD(0x03B4, 0x0128, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__SRC_BT_CFG04                       = IOMUX_PAD(0x03B4, 0x0128, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__SAI1_TX_DATA                       = IOMUX_PAD(0x03B4, 0x0128, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA05__LCDIF_DATA05                       = IOMUX_PAD(0x03B8, 0x012C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__UART8_DCE_RTS                      = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0658, 3, 0),
+	MX6_PAD_LCD_DATA05__UART8_DTE_CTS                      = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT              = IOMUX_PAD(0x03B8, 0x012C, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__SPDIF_OUT                          = IOMUX_PAD(0x03B8, 0x012C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__GPIO3_IO10                         = IOMUX_PAD(0x03B8, 0x012C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__SRC_BT_CFG05                       = IOMUX_PAD(0x03B8, 0x012C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__ECSPI1_SS1                         = IOMUX_PAD(0x03B8, 0x012C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA06__LCDIF_DATA06                       = IOMUX_PAD(0x03BC, 0x0130, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__UART7_DCE_CTS                      = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__UART7_DTE_RTS                      = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0650, 2, 0),
+	MX6_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN               = IOMUX_PAD(0x03BC, 0x0130, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__SPDIF_LOCK                         = IOMUX_PAD(0x03BC, 0x0130, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__GPIO3_IO11                         = IOMUX_PAD(0x03BC, 0x0130, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__SRC_BT_CFG06                       = IOMUX_PAD(0x03BC, 0x0130, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__ECSPI1_SS2                         = IOMUX_PAD(0x03BC, 0x0130, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA07__LCDIF_DATA07                       = IOMUX_PAD(0x03C0, 0x0134, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__UART7_DCE_RTS                      = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0650, 3, 0),
+	MX6_PAD_LCD_DATA07__UART7_DTE_CTS                      = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT              = IOMUX_PAD(0x03C0, 0x0134, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__SPDIF_EXT_CLK                      = IOMUX_PAD(0x03C0, 0x0134, 4, 0x061C, 0, 0),
+	MX6_PAD_LCD_DATA07__GPIO3_IO12                         = IOMUX_PAD(0x03C0, 0x0134, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__SRC_BT_CFG07                       = IOMUX_PAD(0x03C0, 0x0134, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__ECSPI1_SS3                         = IOMUX_PAD(0x03C0, 0x0134, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA08__LCDIF_DATA08                       = IOMUX_PAD(0x03C4, 0x0138, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__SPDIF_IN                           = IOMUX_PAD(0x03C4, 0x0138, 1, 0x0618, 2, 0),
+	MX6_PAD_LCD_DATA08__CSI_DATA16                         = IOMUX_PAD(0x03C4, 0x0138, 3, 0x0504, 1, 0),
+	MX6_PAD_LCD_DATA08__EIM_DATA00                         = IOMUX_PAD(0x03C4, 0x0138, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__GPIO3_IO13                         = IOMUX_PAD(0x03C4, 0x0138, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__SRC_BT_CFG08                       = IOMUX_PAD(0x03C4, 0x0138, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__FLEXCAN1_TX                        = IOMUX_PAD(0x03C4, 0x0138, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA09__LCDIF_DATA09                       = IOMUX_PAD(0x03C8, 0x013C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__SAI3_MCLK                          = IOMUX_PAD(0x03C8, 0x013C, 1, 0x0600, 1, 0),
+	MX6_PAD_LCD_DATA09__CSI_DATA17                         = IOMUX_PAD(0x03C8, 0x013C, 3, 0x0508, 1, 0),
+	MX6_PAD_LCD_DATA09__EIM_DATA01                         = IOMUX_PAD(0x03C8, 0x013C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__GPIO3_IO14                         = IOMUX_PAD(0x03C8, 0x013C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__SRC_BT_CFG09                       = IOMUX_PAD(0x03C8, 0x013C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__FLEXCAN1_RX                        = IOMUX_PAD(0x03C8, 0x013C, 8, 0x0584, 2, 0),
+
+	MX6_PAD_LCD_DATA10__LCDIF_DATA10                       = IOMUX_PAD(0x03CC, 0x0140, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__SAI3_RX_SYNC                       = IOMUX_PAD(0x03CC, 0x0140, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__CSI_DATA18                         = IOMUX_PAD(0x03CC, 0x0140, 3, 0x050C, 1, 0),
+	MX6_PAD_LCD_DATA10__EIM_DATA02                         = IOMUX_PAD(0x03CC, 0x0140, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__GPIO3_IO15                         = IOMUX_PAD(0x03CC, 0x0140, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__SRC_BT_CFG10                       = IOMUX_PAD(0x03CC, 0x0140, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__FLEXCAN2_TX                        = IOMUX_PAD(0x03CC, 0x0140, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA11__LCDIF_DATA11                       = IOMUX_PAD(0x03D0, 0x0144, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__SAI3_RX_BCLK                       = IOMUX_PAD(0x03D0, 0x0144, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__CSI_DATA19                         = IOMUX_PAD(0x03D0, 0x0144, 3, 0x0510, 1, 0),
+	MX6_PAD_LCD_DATA11__EIM_DATA03                         = IOMUX_PAD(0x03D0, 0x0144, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__GPIO3_IO16                         = IOMUX_PAD(0x03D0, 0x0144, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__SRC_BT_CFG11                       = IOMUX_PAD(0x03D0, 0x0144, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__FLEXCAN2_RX                        = IOMUX_PAD(0x03D0, 0x0144, 8, 0x0588, 2, 0),
+
+	MX6_PAD_LCD_DATA12__LCDIF_DATA12                       = IOMUX_PAD(0x03D4, 0x0148, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__SAI3_TX_SYNC                       = IOMUX_PAD(0x03D4, 0x0148, 1, 0x060C, 1, 0),
+	MX6_PAD_LCD_DATA12__CSI_DATA20                         = IOMUX_PAD(0x03D4, 0x0148, 3, 0x0514, 1, 0),
+	MX6_PAD_LCD_DATA12__EIM_DATA04                         = IOMUX_PAD(0x03D4, 0x0148, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__GPIO3_IO17                         = IOMUX_PAD(0x03D4, 0x0148, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__SRC_BT_CFG12                       = IOMUX_PAD(0x03D4, 0x0148, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__ECSPI1_RDY                         = IOMUX_PAD(0x03D4, 0x0148, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA13__LCDIF_DATA13                       = IOMUX_PAD(0x03D8, 0x014C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__SAI3_TX_BCLK                       = IOMUX_PAD(0x03D8, 0x014C, 1, 0x0608, 1, 0),
+	MX6_PAD_LCD_DATA13__CSI_DATA21                         = IOMUX_PAD(0x03D8, 0x014C, 3, 0x0518, 1, 0),
+	MX6_PAD_LCD_DATA13__EIM_DATA05                         = IOMUX_PAD(0x03D8, 0x014C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__GPIO3_IO18                         = IOMUX_PAD(0x03D8, 0x014C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__SRC_BT_CFG13                       = IOMUX_PAD(0x03D8, 0x014C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__USDHC2_RESET_B                     = IOMUX_PAD(0x03D8, 0x014C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA14__LCDIF_DATA14                       = IOMUX_PAD(0x03DC, 0x0150, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__SAI3_RX_DATA                       = IOMUX_PAD(0x03DC, 0x0150, 1, 0x0604, 1, 0),
+	MX6_PAD_LCD_DATA14__CSI_DATA22                         = IOMUX_PAD(0x03DC, 0x0150, 3, 0x051C, 1, 0),
+	MX6_PAD_LCD_DATA14__EIM_DATA06                         = IOMUX_PAD(0x03DC, 0x0150, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__GPIO3_IO19                         = IOMUX_PAD(0x03DC, 0x0150, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__SRC_BT_CFG14                       = IOMUX_PAD(0x03DC, 0x0150, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__USDHC2_DATA4                       = IOMUX_PAD(0x03DC, 0x0150, 8, 0x068C, 0, 0),
+
+	MX6_PAD_LCD_DATA15__LCDIF_DATA15                       = IOMUX_PAD(0x03E0, 0x0154, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__SAI3_TX_DATA                       = IOMUX_PAD(0x03E0, 0x0154, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__CSI_DATA23                         = IOMUX_PAD(0x03E0, 0x0154, 3, 0x0520, 1, 0),
+	MX6_PAD_LCD_DATA15__EIM_DATA07                         = IOMUX_PAD(0x03E0, 0x0154, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__GPIO3_IO20                         = IOMUX_PAD(0x03E0, 0x0154, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__SRC_BT_CFG15                       = IOMUX_PAD(0x03E0, 0x0154, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__USDHC2_DATA5                       = IOMUX_PAD(0x03E0, 0x0154, 8, 0x0690, 0, 0),
+
+	MX6_PAD_LCD_DATA16__LCDIF_DATA16                       = IOMUX_PAD(0x03E4, 0x0158, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__UART7_DCE_TX                       = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__UART7_DTE_RX                       = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0654, 2, 0),
+	MX6_PAD_LCD_DATA16__CSI_DATA01                         = IOMUX_PAD(0x03E4, 0x0158, 3, 0x04D4, 1, 0),
+	MX6_PAD_LCD_DATA16__EIM_DATA08                         = IOMUX_PAD(0x03E4, 0x0158, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__GPIO3_IO21                         = IOMUX_PAD(0x03E4, 0x0158, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__SRC_BT_CFG24                       = IOMUX_PAD(0x03E4, 0x0158, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__USDHC2_DATA6                       = IOMUX_PAD(0x03E4, 0x0158, 8, 0x0694, 0, 0),
+
+	MX6_PAD_LCD_DATA17__LCDIF_DATA17                       = IOMUX_PAD(0x03E8, 0x015C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__UART7_DCE_RX                       = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0654, 3, 0),
+	MX6_PAD_LCD_DATA17__UART7_DTE_TX                       = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__CSI_DATA00                         = IOMUX_PAD(0x03E8, 0x015C, 3, 0x04D0, 1, 0),
+	MX6_PAD_LCD_DATA17__EIM_DATA09                         = IOMUX_PAD(0x03E8, 0x015C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__GPIO3_IO22                         = IOMUX_PAD(0x03E8, 0x015C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__SRC_BT_CFG25                       = IOMUX_PAD(0x03E8, 0x015C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__USDHC2_DATA7                       = IOMUX_PAD(0x03E8, 0x015C, 8, 0x0698, 0, 0),
+
+	MX6_PAD_LCD_DATA18__LCDIF_DATA18                       = IOMUX_PAD(0x03EC, 0x0160, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__PWM5_OUT                           = IOMUX_PAD(0x03EC, 0x0160, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__CA7_MX6UL_EVENTO                   = IOMUX_PAD(0x03EC, 0x0160, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__CSI_DATA10                         = IOMUX_PAD(0x03EC, 0x0160, 3, 0x04EC, 1, 0),
+	MX6_PAD_LCD_DATA18__EIM_DATA10                         = IOMUX_PAD(0x03EC, 0x0160, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__GPIO3_IO23                         = IOMUX_PAD(0x03EC, 0x0160, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__SRC_BT_CFG26                       = IOMUX_PAD(0x03EC, 0x0160, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__USDHC2_CMD                         = IOMUX_PAD(0x03EC, 0x0160, 8, 0x0678, 1, 0),
+	MX6_PAD_LCD_DATA19__EIM_DATA11                         = IOMUX_PAD(0x03F0, 0x0164, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__GPIO3_IO24                         = IOMUX_PAD(0x03F0, 0x0164, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__SRC_BT_CFG27                       = IOMUX_PAD(0x03F0, 0x0164, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__USDHC2_CLK                         = IOMUX_PAD(0x03F0, 0x0164, 8, 0x0670, 1, 0),
+
+	MX6_PAD_LCD_DATA19__LCDIF_DATA19                       = IOMUX_PAD(0x03F0, 0x0164, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__PWM6_OUT                           = IOMUX_PAD(0x03F0, 0x0164, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__WDOG1_WDOG_ANY                     = IOMUX_PAD(0x03F0, 0x0164, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__CSI_DATA11                         = IOMUX_PAD(0x03F0, 0x0164, 3, 0x04F0, 1, 0),
+	MX6_PAD_LCD_DATA20__EIM_DATA12                         = IOMUX_PAD(0x03F4, 0x0168, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__GPIO3_IO25                         = IOMUX_PAD(0x03F4, 0x0168, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__SRC_BT_CFG28                       = IOMUX_PAD(0x03F4, 0x0168, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__USDHC2_DATA0                       = IOMUX_PAD(0x03F4, 0x0168, 8, 0x067C, 1, 0),
+
+	MX6_PAD_LCD_DATA20__LCDIF_DATA20                       = IOMUX_PAD(0x03F4, 0x0168, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__UART8_DCE_TX                       = IOMUX_PAD(0x03F4, 0x0168, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__UART8_DTE_RX                       = IOMUX_PAD(0x03F4, 0x0168, 1, 0x065C, 2, 0),
+	MX6_PAD_LCD_DATA20__ECSPI1_SCLK                        = IOMUX_PAD(0x03F4, 0x0168, 2, 0x0534, 0, 0),
+	MX6_PAD_LCD_DATA20__CSI_DATA12                         = IOMUX_PAD(0x03F4, 0x0168, 3, 0x04F4, 1, 0),
+
+	MX6_PAD_LCD_DATA21__LCDIF_DATA21                       = IOMUX_PAD(0x03F8, 0x016C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__UART8_DCE_RX                       = IOMUX_PAD(0x03F8, 0x016C, 1, 0x065C, 3, 0),
+	MX6_PAD_LCD_DATA21__UART8_DTE_TX                       = IOMUX_PAD(0x03F8, 0x016C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__ECSPI1_SS0                         = IOMUX_PAD(0x03F8, 0x016C, 2, 0x0540, 0, 0),
+	MX6_PAD_LCD_DATA21__CSI_DATA13                         = IOMUX_PAD(0x03F8, 0x016C, 3, 0x04F8, 1, 0),
+	MX6_PAD_LCD_DATA21__EIM_DATA13                         = IOMUX_PAD(0x03F8, 0x016C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__GPIO3_IO26                         = IOMUX_PAD(0x03F8, 0x016C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__SRC_BT_CFG29                       = IOMUX_PAD(0x03F8, 0x016C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__USDHC2_DATA1                       = IOMUX_PAD(0x03F8, 0x016C, 8, 0x0680, 1, 0),
+
+	MX6_PAD_LCD_DATA22__LCDIF_DATA22                       = IOMUX_PAD(0x03FC, 0x0170, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__MQS_RIGHT                          = IOMUX_PAD(0x03FC, 0x0170, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__ECSPI1_MOSI                        = IOMUX_PAD(0x03FC, 0x0170, 2, 0x053C, 0, 0),
+	MX6_PAD_LCD_DATA22__CSI_DATA14                         = IOMUX_PAD(0x03FC, 0x0170, 3, 0x04FC, 1, 0),
+	MX6_PAD_LCD_DATA22__EIM_DATA14                         = IOMUX_PAD(0x03FC, 0x0170, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__GPIO3_IO27                         = IOMUX_PAD(0x03FC, 0x0170, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__SRC_BT_CFG30                       = IOMUX_PAD(0x03FC, 0x0170, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__USDHC2_DATA2                       = IOMUX_PAD(0x03FC, 0x0170, 8, 0x0684, 0, 0),
+
+	MX6_PAD_LCD_DATA23__LCDIF_DATA23                       = IOMUX_PAD(0x0400, 0x0174, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__MQS_LEFT                           = IOMUX_PAD(0x0400, 0x0174, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__ECSPI1_MISO                        = IOMUX_PAD(0x0400, 0x0174, 2, 0x0538, 0, 0),
+	MX6_PAD_LCD_DATA23__CSI_DATA15                         = IOMUX_PAD(0x0400, 0x0174, 3, 0x0500, 1, 0),
+	MX6_PAD_LCD_DATA23__EIM_DATA15                         = IOMUX_PAD(0x0400, 0x0174, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__GPIO3_IO28                         = IOMUX_PAD(0x0400, 0x0174, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__SRC_BT_CFG31                       = IOMUX_PAD(0x0400, 0x0174, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__USDHC2_DATA3                       = IOMUX_PAD(0x0400, 0x0174, 8, 0x0688, 1, 0),
+
+	MX6_PAD_NAND_RE_B__RAWNAND_RE_B                        = IOMUX_PAD(0x0404, 0x0178, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_RE_B__USDHC2_CLK                          = IOMUX_PAD(0x0404, 0x0178, 1, 0x0670, 2, 0),
+	MX6_PAD_NAND_RE_B__QSPI_B_SCLK                         = IOMUX_PAD(0x0404, 0x0178, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_RE_B__KPP_ROW00                           = IOMUX_PAD(0x0404, 0x0178, 3, 0x05D0, 1, 0),
+	MX6_PAD_NAND_RE_B__EIM_EB_B00                          = IOMUX_PAD(0x0404, 0x0178, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_RE_B__GPIO4_IO00                          = IOMUX_PAD(0x0404, 0x0178, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_RE_B__ECSPI3_SS2                          = IOMUX_PAD(0x0404, 0x0178, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_WE_B__RAWNAND_WE_B                        = IOMUX_PAD(0x0408, 0x017C, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_WE_B__USDHC2_CMD                          = IOMUX_PAD(0x0408, 0x017C, 1, 0x0678, 2, 0),
+	MX6_PAD_NAND_WE_B__QSPI_B_SS0_B                        = IOMUX_PAD(0x0408, 0x017C, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_WE_B__KPP_COL00                           = IOMUX_PAD(0x0408, 0x017C, 3, 0x05C4, 1, 0),
+	MX6_PAD_NAND_WE_B__EIM_EB_B01                          = IOMUX_PAD(0x0408, 0x017C, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_WE_B__GPIO4_IO01                          = IOMUX_PAD(0x0408, 0x017C, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_WE_B__ECSPI3_SS3                          = IOMUX_PAD(0x0408, 0x017C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA00__RAWNAND_DATA00                    = IOMUX_PAD(0x040C, 0x0180, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA00__USDHC2_DATA0                      = IOMUX_PAD(0x040C, 0x0180, 1, 0x067C, 2, 0),
+	MX6_PAD_NAND_DATA00__QSPI_B_SS1_B                      = IOMUX_PAD(0x040C, 0x0180, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA00__KPP_ROW01                         = IOMUX_PAD(0x040C, 0x0180, 3, 0x05D4, 1, 0),
+	MX6_PAD_NAND_DATA00__EIM_AD08                          = IOMUX_PAD(0x040C, 0x0180, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA00__GPIO4_IO02                        = IOMUX_PAD(0x040C, 0x0180, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA00__ECSPI4_RDY                        = IOMUX_PAD(0x040C, 0x0180, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA01__RAWNAND_DATA01                    = IOMUX_PAD(0x0410, 0x0184, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA01__USDHC2_DATA1                      = IOMUX_PAD(0x0410, 0x0184, 1, 0x0680, 2, 0),
+	MX6_PAD_NAND_DATA01__QSPI_B_DQS                        = IOMUX_PAD(0x0410, 0x0184, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA01__KPP_COL01                         = IOMUX_PAD(0x0410, 0x0184, 3, 0x05C8, 1, 0),
+	MX6_PAD_NAND_DATA01__EIM_AD09                          = IOMUX_PAD(0x0410, 0x0184, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA01__GPIO4_IO03                        = IOMUX_PAD(0x0410, 0x0184, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA01__ECSPI4_SS1                        = IOMUX_PAD(0x0410, 0x0184, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA02__RAWNAND_DATA02                    = IOMUX_PAD(0x0414, 0x0188, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA02__USDHC2_DATA2                      = IOMUX_PAD(0x0414, 0x0188, 1, 0x0684, 1, 0),
+	MX6_PAD_NAND_DATA02__QSPI_B_DATA00                     = IOMUX_PAD(0x0414, 0x0188, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA02__KPP_ROW02                         = IOMUX_PAD(0x0414, 0x0188, 3, 0x05D8, 1, 0),
+	MX6_PAD_NAND_DATA02__EIM_AD10                          = IOMUX_PAD(0x0414, 0x0188, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA02__GPIO4_IO04                        = IOMUX_PAD(0x0414, 0x0188, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA02__ECSPI4_SS2                        = IOMUX_PAD(0x0414, 0x0188, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA03__RAWNAND_DATA03                    = IOMUX_PAD(0x0418, 0x018C, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA03__USDHC2_DATA3                      = IOMUX_PAD(0x0418, 0x018C, 1, 0x0688, 2, 0),
+	MX6_PAD_NAND_DATA03__QSPI_B_DATA01                     = IOMUX_PAD(0x0418, 0x018C, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA03__KPP_COL02                         = IOMUX_PAD(0x0418, 0x018C, 3, 0x05CC, 1, 0),
+	MX6_PAD_NAND_DATA03__EIM_AD11                          = IOMUX_PAD(0x0418, 0x018C, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA03__GPIO4_IO05                        = IOMUX_PAD(0x0418, 0x018C, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA03__ECSPI4_SS3                        = IOMUX_PAD(0x0418, 0x018C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA04__RAWNAND_DATA04                    = IOMUX_PAD(0x041C, 0x0190, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__USDHC2_DATA4                      = IOMUX_PAD(0x041C, 0x0190, 1, 0x068C, 1, 0),
+	MX6_PAD_NAND_DATA04__QSPI_B_DATA02                     = IOMUX_PAD(0x041C, 0x0190, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__ECSPI4_SCLK                       = IOMUX_PAD(0x041C, 0x0190, 3, 0x0564, 1, 0),
+	MX6_PAD_NAND_DATA04__EIM_AD12                          = IOMUX_PAD(0x041C, 0x0190, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__GPIO4_IO06                        = IOMUX_PAD(0x041C, 0x0190, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__UART2_DCE_TX                      = IOMUX_PAD(0x041C, 0x0190, 8, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__UART2_DTE_RX                      = IOMUX_PAD(0x041C, 0x0190, 8, 0x062C, 2, 0),
+
+	MX6_PAD_NAND_DATA05__RAWNAND_DATA05                    = IOMUX_PAD(0x0420, 0x0194, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA05__USDHC2_DATA5                      = IOMUX_PAD(0x0420, 0x0194, 1, 0x0690, 1, 0),
+	MX6_PAD_NAND_DATA05__QSPI_B_DATA03                     = IOMUX_PAD(0x0420, 0x0194, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA05__ECSPI4_MOSI                       = IOMUX_PAD(0x0420, 0x0194, 3, 0x056C, 1, 0),
+	MX6_PAD_NAND_DATA05__EIM_AD13                          = IOMUX_PAD(0x0420, 0x0194, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA05__GPIO4_IO07                        = IOMUX_PAD(0x0420, 0x0194, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA05__UART2_DCE_RX                      = IOMUX_PAD(0x0420, 0x0194, 8, 0x062C, 3, 0),
+	MX6_PAD_NAND_DATA05__UART2_DTE_TX                      = IOMUX_PAD(0x0420, 0x0194, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA06__RAWNAND_DATA06                    = IOMUX_PAD(0x0424, 0x0198, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__USDHC2_DATA6                      = IOMUX_PAD(0x0424, 0x0198, 1, 0x0694, 1, 0),
+	MX6_PAD_NAND_DATA06__SAI2_RX_BCLK                      = IOMUX_PAD(0x0424, 0x0198, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__ECSPI4_MISO                       = IOMUX_PAD(0x0424, 0x0198, 3, 0x0568, 1, 0),
+	MX6_PAD_NAND_DATA06__EIM_AD14                          = IOMUX_PAD(0x0424, 0x0198, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__GPIO4_IO08                        = IOMUX_PAD(0x0424, 0x0198, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__UART2_DCE_CTS                     = IOMUX_PAD(0x0424, 0x0198, 8, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__UART2_DTE_RTS                     = IOMUX_PAD(0x0424, 0x0198, 8, 0x0628, 4, 0),
+
+	MX6_PAD_NAND_DATA07__RAWNAND_DATA07                    = IOMUX_PAD(0x0428, 0x019C, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA07__USDHC2_DATA7                      = IOMUX_PAD(0x0428, 0x019C, 1, 0x0698, 1, 0),
+	MX6_PAD_NAND_DATA07__QSPI_A_SS1_B                      = IOMUX_PAD(0x0428, 0x019C, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA07__ECSPI4_SS0                        = IOMUX_PAD(0x0428, 0x019C, 3, 0x0570, 1, 0),
+	MX6_PAD_NAND_DATA07__EIM_AD15                          = IOMUX_PAD(0x0428, 0x019C, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA07__GPIO4_IO09                        = IOMUX_PAD(0x0428, 0x019C, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA07__UART2_DCE_RTS                     = IOMUX_PAD(0x0428, 0x019C, 8, 0x0628, 5, 0),
+	MX6_PAD_NAND_DATA07__UART2_DTE_CTS                     = IOMUX_PAD(0x0428, 0x019C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_ALE__RAWNAND_ALE                          = IOMUX_PAD(0x042C, 0x01A0, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__USDHC2_RESET_B                       = IOMUX_PAD(0x042C, 0x01A0, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__QSPI_A_DQS                           = IOMUX_PAD(0x042C, 0x01A0, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__PWM3_OUT                             = IOMUX_PAD(0x042C, 0x01A0, 3, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__EIM_ADDR17                           = IOMUX_PAD(0x042C, 0x01A0, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__GPIO4_IO10                           = IOMUX_PAD(0x042C, 0x01A0, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__ECSPI3_SS1                           = IOMUX_PAD(0x042C, 0x01A0, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_WP_B__RAWNAND_WP_B                        = IOMUX_PAD(0x0430, 0x01A4, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__USDHC1_RESET_B                      = IOMUX_PAD(0x0430, 0x01A4, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__QSPI_A_SCLK                         = IOMUX_PAD(0x0430, 0x01A4, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__PWM4_OUT                            = IOMUX_PAD(0x0430, 0x01A4, 3, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__EIM_BCLK                            = IOMUX_PAD(0x0430, 0x01A4, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__GPIO4_IO11                          = IOMUX_PAD(0x0430, 0x01A4, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__ECSPI3_RDY                          = IOMUX_PAD(0x0430, 0x01A4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_READY_B__RAWNAND_READY_B                  = IOMUX_PAD(0x0434, 0x01A8, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__USDHC1_DATA4                     = IOMUX_PAD(0x0434, 0x01A8, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__QSPI_A_DATA00                    = IOMUX_PAD(0x0434, 0x01A8, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__ECSPI3_SS0                       = IOMUX_PAD(0x0434, 0x01A8, 3, 0x0560, 1, 0),
+	MX6_PAD_NAND_READY_B__EIM_CS1_B                        = IOMUX_PAD(0x0434, 0x01A8, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__GPIO4_IO12                       = IOMUX_PAD(0x0434, 0x01A8, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__UART3_DCE_TX                     = IOMUX_PAD(0x0434, 0x01A8, 8, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__UART3_DTE_RX                     = IOMUX_PAD(0x0434, 0x01A8, 8, 0x0634, 2, 0),
+
+	MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B                      = IOMUX_PAD(0x0438, 0x01AC, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__USDHC1_DATA5                       = IOMUX_PAD(0x0438, 0x01AC, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__QSPI_A_DATA01                      = IOMUX_PAD(0x0438, 0x01AC, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__ECSPI3_SCLK                        = IOMUX_PAD(0x0438, 0x01AC, 3, 0x0554, 1, 0),
+	MX6_PAD_NAND_CE0_B__EIM_DTACK_B                        = IOMUX_PAD(0x0438, 0x01AC, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__GPIO4_IO13                         = IOMUX_PAD(0x0438, 0x01AC, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__UART3_DCE_RX                       = IOMUX_PAD(0x0438, 0x01AC, 8, 0x0634, 3, 0),
+	MX6_PAD_NAND_CE0_B__UART3_DTE_TX                       = IOMUX_PAD(0x0438, 0x01AC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_CE1_B__RAWNAND_CE1_B                      = IOMUX_PAD(0x043C, 0x01B0, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__USDHC1_DATA6                       = IOMUX_PAD(0x043C, 0x01B0, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__QSPI_A_DATA02                      = IOMUX_PAD(0x043C, 0x01B0, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__ECSPI3_MOSI                        = IOMUX_PAD(0x043C, 0x01B0, 3, 0x055C, 1, 0),
+	MX6_PAD_NAND_CE1_B__EIM_ADDR18                         = IOMUX_PAD(0x043C, 0x01B0, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__GPIO4_IO14                         = IOMUX_PAD(0x043C, 0x01B0, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__UART3_DCE_CTS                      = IOMUX_PAD(0x043C, 0x01B0, 8, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__UART3_DTE_RTS                      = IOMUX_PAD(0x043C, 0x01B0, 8, 0x0630, 2, 0),
+
+	MX6_PAD_NAND_CLE__RAWNAND_CLE                          = IOMUX_PAD(0x0440, 0x01B4, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__USDHC1_DATA7                         = IOMUX_PAD(0x0440, 0x01B4, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__QSPI_A_DATA03                        = IOMUX_PAD(0x0440, 0x01B4, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__ECSPI3_MISO                          = IOMUX_PAD(0x0440, 0x01B4, 3, 0x0558, 1, 0),
+	MX6_PAD_NAND_CLE__EIM_ADDR16                           = IOMUX_PAD(0x0440, 0x01B4, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__GPIO4_IO15                           = IOMUX_PAD(0x0440, 0x01B4, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__UART3_DCE_RTS                        = IOMUX_PAD(0x0440, 0x01B4, 8, 0x0630, 3, 0),
+	MX6_PAD_NAND_CLE__UART3_DTE_CTS                        = IOMUX_PAD(0x0440, 0x01B4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DQS__RAWNAND_DQS                          = IOMUX_PAD(0x0444, 0x01B8, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__CSI_FIELD                            = IOMUX_PAD(0x0444, 0x01B8, 1, 0x0530, 1, 0),
+	MX6_PAD_NAND_DQS__QSPI_A_SS0_B                         = IOMUX_PAD(0x0444, 0x01B8, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__PWM5_OUT                             = IOMUX_PAD(0x0444, 0x01B8, 3, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__EIM_WAIT                             = IOMUX_PAD(0x0444, 0x01B8, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__GPIO4_IO16                           = IOMUX_PAD(0x0444, 0x01B8, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__SDMA_EXT_EVENT01                     = IOMUX_PAD(0x0444, 0x01B8, 6, 0x0614, 1, 0),
+	MX6_PAD_NAND_DQS__SPDIF_EXT_CLK                        = IOMUX_PAD(0x0444, 0x01B8, 8, 0x061C, 1, 0),
+
+	MX6_PAD_SD1_CMD__USDHC1_CMD                            = IOMUX_PAD(0x0448, 0x01BC, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__GPT2_COMPARE1                         = IOMUX_PAD(0x0448, 0x01BC, 1, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__SAI2_RX_SYNC                          = IOMUX_PAD(0x0448, 0x01BC, 2, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__SPDIF_OUT                             = IOMUX_PAD(0x0448, 0x01BC, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__EIM_ADDR19                            = IOMUX_PAD(0x0448, 0x01BC, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__GPIO2_IO16                            = IOMUX_PAD(0x0448, 0x01BC, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__SDMA_EXT_EVENT00                      = IOMUX_PAD(0x0448, 0x01BC, 6, 0x0610, 2, 0),
+	MX6_PAD_SD1_CMD__USB_OTG1_PWR                          = IOMUX_PAD(0x0448, 0x01BC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_CLK__USDHC1_CLK                            = IOMUX_PAD(0x044C, 0x01C0, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__GPT2_COMPARE2                         = IOMUX_PAD(0x044C, 0x01C0, 1, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__SAI2_MCLK                             = IOMUX_PAD(0x044C, 0x01C0, 2, 0x05F0, 1, 0),
+	MX6_PAD_SD1_CLK__SPDIF_IN                              = IOMUX_PAD(0x044C, 0x01C0, 3, 0x0618, 3, 0),
+	MX6_PAD_SD1_CLK__EIM_ADDR20                            = IOMUX_PAD(0x044C, 0x01C0, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__GPIO2_IO17                            = IOMUX_PAD(0x044C, 0x01C0, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__USB_OTG1_OC                           = IOMUX_PAD(0x044C, 0x01C0, 8, 0x0664, 2, 0),
+
+	MX6_PAD_SD1_DATA0__USDHC1_DATA0                        = IOMUX_PAD(0x0450, 0x01C4, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__GPT2_COMPARE3                       = IOMUX_PAD(0x0450, 0x01C4, 1, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__SAI2_TX_SYNC                        = IOMUX_PAD(0x0450, 0x01C4, 2, 0x05FC, 1, 0),
+	MX6_PAD_SD1_DATA0__FLEXCAN1_TX                         = IOMUX_PAD(0x0450, 0x01C4, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__EIM_ADDR21                          = IOMUX_PAD(0x0450, 0x01C4, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__GPIO2_IO18                          = IOMUX_PAD(0x0450, 0x01C4, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__ANATOP_OTG1_ID                      = IOMUX_PAD(0x0450, 0x01C4, 8, 0x04B8, 2, 0),
+
+	MX6_PAD_SD1_DATA1__USDHC1_DATA1                        = IOMUX_PAD(0x0454, 0x01C8, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA1__GPT2_CLK                            = IOMUX_PAD(0x0454, 0x01C8, 1, 0x05A0, 1, 0),
+	MX6_PAD_SD1_DATA1__SAI2_TX_BCLK                        = IOMUX_PAD(0x0454, 0x01C8, 2, 0x05F8, 1, 0),
+	MX6_PAD_SD1_DATA1__FLEXCAN1_RX                         = IOMUX_PAD(0x0454, 0x01C8, 3, 0x0584, 3, 0),
+	MX6_PAD_SD1_DATA1__EIM_ADDR22                          = IOMUX_PAD(0x0454, 0x01C8, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA1__GPIO2_IO19                          = IOMUX_PAD(0x0454, 0x01C8, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA1__USB_OTG2_PWR                        = IOMUX_PAD(0x0454, 0x01C8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA2__USDHC1_DATA2                        = IOMUX_PAD(0x0458, 0x01CC, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__GPT2_CAPTURE1                       = IOMUX_PAD(0x0458, 0x01CC, 1, 0x0598, 1, 0),
+	MX6_PAD_SD1_DATA2__SAI2_RX_DATA                        = IOMUX_PAD(0x0458, 0x01CC, 2, 0x05F4, 1, 0),
+	MX6_PAD_SD1_DATA2__FLEXCAN2_TX                         = IOMUX_PAD(0x0458, 0x01CC, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__EIM_ADDR23                          = IOMUX_PAD(0x0458, 0x01CC, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__GPIO2_IO20                          = IOMUX_PAD(0x0458, 0x01CC, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__CCM_CLKO1                           = IOMUX_PAD(0x0458, 0x01CC, 6, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__USB_OTG2_OC                         = IOMUX_PAD(0x0458, 0x01CC, 8, 0x0660, 2, 0),
+
+	MX6_PAD_SD1_DATA3__USDHC1_DATA3                        = IOMUX_PAD(0x045C, 0x01D0, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__GPT2_CAPTURE2                       = IOMUX_PAD(0x045C, 0x01D0, 1, 0x059C, 1, 0),
+	MX6_PAD_SD1_DATA3__SAI2_TX_DATA                        = IOMUX_PAD(0x045C, 0x01D0, 2, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__FLEXCAN2_RX                         = IOMUX_PAD(0x045C, 0x01D0, 3, 0x0588, 3, 0),
+	MX6_PAD_SD1_DATA3__EIM_ADDR24                          = IOMUX_PAD(0x045C, 0x01D0, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__GPIO2_IO21                          = IOMUX_PAD(0x045C, 0x01D0, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__CCM_CLKO2                           = IOMUX_PAD(0x045C, 0x01D0, 6, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__ANATOP_OTG2_ID                      = IOMUX_PAD(0x045C, 0x01D0, 8, 0x04BC, 2, 0),
+
+	MX6_PAD_CSI_MCLK__CSI_MCLK                             = IOMUX_PAD(0x0460, 0x01D4, 0, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__USDHC2_CD_B                          = IOMUX_PAD(0x0460, 0x01D4, 1, 0x0674, 0, 0),
+	MX6_PAD_CSI_MCLK__RAWNAND_CE2_B                        = IOMUX_PAD(0x0460, 0x01D4, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__I2C1_SDA                             = IOMUX_PAD(0x0460, 0x01D4, IOMUX_CONFIG_SION | 3, 0x05A8, 0, 0),
+	MX6_PAD_CSI_MCLK__EIM_CS0_B                            = IOMUX_PAD(0x0460, 0x01D4, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__GPIO4_IO17                           = IOMUX_PAD(0x0460, 0x01D4, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL                    = IOMUX_PAD(0x0460, 0x01D4, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__UART6_DCE_TX                         = IOMUX_PAD(0x0460, 0x01D4, 8, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__UART6_DTE_RX                         = IOMUX_PAD(0x0460, 0x01D4, 8, 0x064C, 0, 0),
+
+	MX6_PAD_CSI_PIXCLK__CSI_PIXCLK                         = IOMUX_PAD(0x0464, 0x01D8, 0, 0x0528, 1, 0),
+	MX6_PAD_CSI_PIXCLK__USDHC2_WP                          = IOMUX_PAD(0x0464, 0x01D8, 1, 0x069C, 2, 0),
+	MX6_PAD_CSI_PIXCLK__RAWNAND_CE3_B                      = IOMUX_PAD(0x0464, 0x01D8, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_PIXCLK__I2C1_SCL                           = IOMUX_PAD(0x0464, 0x01D8, IOMUX_CONFIG_SION | 3, 0x05A4, 2, 0),
+	MX6_PAD_CSI_PIXCLK__EIM_OE                             = IOMUX_PAD(0x0464, 0x01D8, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_PIXCLK__GPIO4_IO18                         = IOMUX_PAD(0x0464, 0x01D8, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_PIXCLK__SNVS_HP_VIO_5                      = IOMUX_PAD(0x0464, 0x01D8, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_PIXCLK__UART6_DCE_RX                       = IOMUX_PAD(0x0464, 0x01D8, 8, 0x064C, 3, 0),
+	MX6_PAD_CSI_PIXCLK__UART6_DTE_TX                       = IOMUX_PAD(0x0464, 0x01D8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_VSYNC__CSI_VSYNC                           = IOMUX_PAD(0x0468, 0x01DC, 0, 0x052C, 0, 0),
+	MX6_PAD_CSI_VSYNC__USDHC2_CLK                          = IOMUX_PAD(0x0468, 0x01DC, 1, 0x0670, 0, 0),
+	MX6_PAD_CSI_VSYNC__SIM1_PORT1_CLK                      = IOMUX_PAD(0x0468, 0x01DC, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_VSYNC__I2C2_SDA                            = IOMUX_PAD(0x0468, 0x01DC, IOMUX_CONFIG_SION | 3, 0x05B0, 0, 0),
+	MX6_PAD_CSI_VSYNC__EIM_RW                              = IOMUX_PAD(0x0468, 0x01DC, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_VSYNC__GPIO4_IO19                          = IOMUX_PAD(0x0468, 0x01DC, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_VSYNC__PWM7_OUT                            = IOMUX_PAD(0x0468, 0x01DC, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_VSYNC__UART6_DCE_RTS                       = IOMUX_PAD(0x0468, 0x01DC, 8, 0x0648, 0, 0),
+	MX6_PAD_CSI_VSYNC__UART6_DTE_CTS                       = IOMUX_PAD(0x0468, 0x01DC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_HSYNC__CSI_HSYNC                           = IOMUX_PAD(0x046C, 0x01E0, 0, 0x0524, 0, 0),
+	MX6_PAD_CSI_HSYNC__USDHC2_CMD                          = IOMUX_PAD(0x046C, 0x01E0, 1, 0x0678, 0, 0),
+	MX6_PAD_CSI_HSYNC__SIM1_PORT1_PD                       = IOMUX_PAD(0x046C, 0x01E0, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__I2C2_SCL                            = IOMUX_PAD(0x046C, 0x01E0, IOMUX_CONFIG_SION | 3, 0x05AC, 0, 0),
+	MX6_PAD_CSI_HSYNC__EIM_LBA_B                           = IOMUX_PAD(0x046C, 0x01E0, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__GPIO4_IO20                          = IOMUX_PAD(0x046C, 0x01E0, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__PWM8_OUT                            = IOMUX_PAD(0x046C, 0x01E0, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__UART6_DCE_CTS                       = IOMUX_PAD(0x046C, 0x01E0, 8, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__UART6_DTE_RTS                       = IOMUX_PAD(0x046C, 0x01E0, 8, 0x0648, 1, 0),
+
+	MX6_PAD_CSI_DATA00__CSI_DATA02                         = IOMUX_PAD(0x0470, 0x01E4, 0, 0x04C4, 0, 0),
+	MX6_PAD_CSI_DATA00__USDHC2_DATA0                       = IOMUX_PAD(0x0470, 0x01E4, 1, 0x067C, 0, 0),
+	MX6_PAD_CSI_DATA00__SIM1_PORT1_RST_B                   = IOMUX_PAD(0x0470, 0x01E4, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__ECSPI2_SCLK                        = IOMUX_PAD(0x0470, 0x01E4, 3, 0x0544, 0, 0),
+	MX6_PAD_CSI_DATA00__EIM_AD00                           = IOMUX_PAD(0x0470, 0x01E4, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__GPIO4_IO21                         = IOMUX_PAD(0x0470, 0x01E4, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__SRC_INT_BOOT                       = IOMUX_PAD(0x0470, 0x01E4, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__UART5_DCE_TX                       = IOMUX_PAD(0x0470, 0x01E4, 8, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__UART5_DTE_RX                       = IOMUX_PAD(0x0470, 0x01E4, 8, 0x0644, 0, 0),
+
+	MX6_PAD_CSI_DATA01__CSI_DATA03                         = IOMUX_PAD(0x0474, 0x01E8, 0, 0x04C8, 0, 0),
+	MX6_PAD_CSI_DATA01__USDHC2_DATA1                       = IOMUX_PAD(0x0474, 0x01E8, 1, 0x0680, 0, 0),
+	MX6_PAD_CSI_DATA01__SIM1_PORT1_SVEN                    = IOMUX_PAD(0x0474, 0x01E8, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA01__ECSPI2_SS0                         = IOMUX_PAD(0x0474, 0x01E8, 3, 0x0550, 0, 0),
+	MX6_PAD_CSI_DATA01__EIM_AD01                           = IOMUX_PAD(0x0474, 0x01E8, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA01__GPIO4_IO22                         = IOMUX_PAD(0x0474, 0x01E8, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA01__SAI1_MCLK                          = IOMUX_PAD(0x0474, 0x01E8, 6, 0x05E0, 0, 0),
+	MX6_PAD_CSI_DATA01__UART5_DCE_RX                       = IOMUX_PAD(0x0474, 0x01E8, 8, 0x0644, 1, 0),
+	MX6_PAD_CSI_DATA01__UART5_DTE_TX                       = IOMUX_PAD(0x0474, 0x01E8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_DATA02__CSI_DATA04                         = IOMUX_PAD(0x0478, 0x01EC, 0, 0x04D8, 1, 0),
+	MX6_PAD_CSI_DATA02__USDHC2_DATA2                       = IOMUX_PAD(0x0478, 0x01EC, 1, 0x0684, 2, 0),
+	MX6_PAD_CSI_DATA02__SIM1_PORT1_TRXD                    = IOMUX_PAD(0x0478, 0x01EC, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA02__ECSPI2_MOSI                        = IOMUX_PAD(0x0478, 0x01EC, 3, 0x054C, 1, 0),
+	MX6_PAD_CSI_DATA02__EIM_AD02                           = IOMUX_PAD(0x0478, 0x01EC, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA02__GPIO4_IO23                         = IOMUX_PAD(0x0478, 0x01EC, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA02__SAI1_RX_SYNC                       = IOMUX_PAD(0x0478, 0x01EC, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA02__UART5_DCE_RTS                      = IOMUX_PAD(0x0478, 0x01EC, 8, 0x0640, 5, 0),
+	MX6_PAD_CSI_DATA02__UART5_DTE_CTS                      = IOMUX_PAD(0x0478, 0x01EC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_DATA03__CSI_DATA05                         = IOMUX_PAD(0x047C, 0x01F0, 0, 0x04CC, 0, 0),
+	MX6_PAD_CSI_DATA03__USDHC2_DATA3                       = IOMUX_PAD(0x047C, 0x01F0, 1, 0x0688, 0, 0),
+	MX6_PAD_CSI_DATA03__SIM2_PORT1_PD                      = IOMUX_PAD(0x047C, 0x01F0, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__ECSPI2_MISO                        = IOMUX_PAD(0x047C, 0x01F0, 3, 0x0548, 0, 0),
+	MX6_PAD_CSI_DATA03__EIM_AD03                           = IOMUX_PAD(0x047C, 0x01F0, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__GPIO4_IO24                         = IOMUX_PAD(0x047C, 0x01F0, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__SAI1_RX_BCLK                       = IOMUX_PAD(0x047C, 0x01F0, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__UART5_DCE_CTS                      = IOMUX_PAD(0x047C, 0x01F0, 8, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__UART5_DTE_RTS                      = IOMUX_PAD(0x047C, 0x01F0, 8, 0x0640, 0, 0),
+
+	MX6_PAD_CSI_DATA04__CSI_DATA06                         = IOMUX_PAD(0x0480, 0x01F4, 0, 0x04DC, 1, 0),
+	MX6_PAD_CSI_DATA04__USDHC2_DATA4                       = IOMUX_PAD(0x0480, 0x01F4, 1, 0x068C, 2, 0),
+	MX6_PAD_CSI_DATA04__SIM2_PORT1_CLK                     = IOMUX_PAD(0x0480, 0x01F4, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA04__ECSPI1_SCLK                        = IOMUX_PAD(0x0480, 0x01F4, 3, 0x0534, 1, 0),
+	MX6_PAD_CSI_DATA04__EIM_AD04                           = IOMUX_PAD(0x0480, 0x01F4, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA04__GPIO4_IO25                         = IOMUX_PAD(0x0480, 0x01F4, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA04__SAI1_TX_SYNC                       = IOMUX_PAD(0x0480, 0x01F4, 6, 0x05EC, 1, 0),
+	MX6_PAD_CSI_DATA04__USDHC1_WP                          = IOMUX_PAD(0x0480, 0x01F4, 8, 0x066C, 2, 0),
+
+	MX6_PAD_CSI_DATA05__CSI_DATA07                         = IOMUX_PAD(0x0484, 0x01F8, 0, 0x04E0, 1, 0),
+	MX6_PAD_CSI_DATA05__USDHC2_DATA5                       = IOMUX_PAD(0x0484, 0x01F8, 1, 0x0690, 2, 0),
+	MX6_PAD_CSI_DATA05__SIM2_PORT1_RST_B                   = IOMUX_PAD(0x0484, 0x01F8, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA05__ECSPI1_SS0                         = IOMUX_PAD(0x0484, 0x01F8, 3, 0x0540, 1, 0),
+	MX6_PAD_CSI_DATA05__EIM_AD05                           = IOMUX_PAD(0x0484, 0x01F8, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA05__GPIO4_IO26                         = IOMUX_PAD(0x0484, 0x01F8, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA05__SAI1_TX_BCLK                       = IOMUX_PAD(0x0484, 0x01F8, 6, 0x05E8, 1, 0),
+	MX6_PAD_CSI_DATA05__USDHC1_CD_B                        = IOMUX_PAD(0x0484, 0x01F8, 8, 0x0668, 2, 0),
+
+	MX6_PAD_CSI_DATA06__CSI_DATA08                         = IOMUX_PAD(0x0488, 0x01FC, 0, 0x04E4, 1, 0),
+	MX6_PAD_CSI_DATA06__USDHC2_DATA6                       = IOMUX_PAD(0x0488, 0x01FC, 1, 0x0694, 2, 0),
+	MX6_PAD_CSI_DATA06__SIM2_PORT1_SVEN                    = IOMUX_PAD(0x0488, 0x01FC, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA06__ECSPI1_MOSI                        = IOMUX_PAD(0x0488, 0x01FC, 3, 0x053C, 1, 0),
+	MX6_PAD_CSI_DATA06__EIM_AD06                           = IOMUX_PAD(0x0488, 0x01FC, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA06__GPIO4_IO27                         = IOMUX_PAD(0x0488, 0x01FC, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA06__SAI1_RX_DATA                       = IOMUX_PAD(0x0488, 0x01FC, 6, 0x05E4, 1, 0),
+	MX6_PAD_CSI_DATA06__USDHC1_RESET_B                     = IOMUX_PAD(0x0488, 0x01FC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_DATA07__CSI_DATA09                         = IOMUX_PAD(0x048C, 0x0200, 0, 0x04E8, 1, 0),
+	MX6_PAD_CSI_DATA07__USDHC2_DATA7                       = IOMUX_PAD(0x048C, 0x0200, 1, 0x0698, 2, 0),
+	MX6_PAD_CSI_DATA07__SIM2_PORT1_TRXD                    = IOMUX_PAD(0x048C, 0x0200, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA07__ECSPI1_MISO                        = IOMUX_PAD(0x048C, 0x0200, 3, 0x0538, 1, 0),
+	MX6_PAD_CSI_DATA07__EIM_AD07                           = IOMUX_PAD(0x048C, 0x0200, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA07__GPIO4_IO28                         = IOMUX_PAD(0x048C, 0x0200, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA07__SAI1_TX_DATA                       = IOMUX_PAD(0x048C, 0x0200, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA07__USDHC1_VSELECT                     = IOMUX_PAD(0x048C, 0x0200, 8, 0x0000, 0, 0),
+};
+#endif  /* __ASM_ARCH_IMX6UL_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ull_pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ull_pins.h
new file mode 100644
index 000000000..842d0caa6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mx6ull_pins.h
@@ -0,0 +1,1064 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_IMX6ULL_PINS_H__
+#define __ASM_ARCH_IMX6ULL_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+	MX6_PAD_BOOT_MODE0__GPIO5_IO10	                       = IOMUX_PAD(0x0044, 0x0000, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_BOOT_MODE1__GPIO5_IO11	                       = IOMUX_PAD(0x0048, 0x0004, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+
+	/*
+	 * The TAMPER Pin can be used for GPIO, which depends on
+	 * TAMPER_PIN_DISABLE[1:0] settings.
+	 */
+	MX6_PAD_SNVS_TAMPER0__GPIO5_IO00                       = IOMUX_PAD(0x004C, 0x0008, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER1__GPIO5_IO01                       = IOMUX_PAD(0x0050, 0x000C, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER2__GPIO5_IO02                       = IOMUX_PAD(0x0054, 0x0010, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER3__GPIO5_IO03                       = IOMUX_PAD(0x0058, 0x0014, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER4__GPIO5_IO04                       = IOMUX_PAD(0x005C, 0x0018, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER5__GPIO5_IO05                       = IOMUX_PAD(0x0060, 0x001C, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER6__GPIO5_IO06                       = IOMUX_PAD(0x0064, 0x0020, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER7__GPIO5_IO07                       = IOMUX_PAD(0x0068, 0x0024, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER8__GPIO5_IO08                       = IOMUX_PAD(0x006C, 0x0028, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX6_PAD_SNVS_TAMPER9__GPIO5_IO09                       = IOMUX_PAD(0x0070, 0x002C, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_MOD__SJC_MOD                             = IOMUX_PAD(0x02D0, 0x0044, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_MOD__GPT2_CLK                            = IOMUX_PAD(0x02D0, 0x0044, 1, 0x05A0, 0, 0),
+	MX6_PAD_JTAG_MOD__SPDIF_OUT                           = IOMUX_PAD(0x02D0, 0x0044, 2, 0x0000, 0, 0),
+	MX6_PAD_JTAG_MOD__ENET1_REF_CLK_25M                   = IOMUX_PAD(0x02D0, 0x0044, 3, 0x0000, 0, 0),
+	MX6_PAD_JTAG_MOD__CCM_PMIC_RDY                        = IOMUX_PAD(0x02D0, 0x0044, 4, 0x04C0, 0, 0),
+	MX6_PAD_JTAG_MOD__GPIO1_IO10                          = IOMUX_PAD(0x02D0, 0x0044, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_MOD__SDMA_EXT_EVENT00                    = IOMUX_PAD(0x02D0, 0x0044, 6, 0x0610, 0, 0),
+
+	MX6_PAD_JTAG_TMS__SJC_TMS                             = IOMUX_PAD(0x02D4, 0x0048, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TMS__GPT2_CAPTURE1                       = IOMUX_PAD(0x02D4, 0x0048, 1, 0x0598, 0, 0),
+	MX6_PAD_JTAG_TMS__SAI2_MCLK                           = IOMUX_PAD(0x02D4, 0x0048, 2, 0x05F0, 0, 0),
+	MX6_PAD_JTAG_TMS__CCM_CLKO1                           = IOMUX_PAD(0x02D4, 0x0048, 3, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TMS__CCM_WAIT                            = IOMUX_PAD(0x02D4, 0x0048, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TMS__GPIO1_IO11                          = IOMUX_PAD(0x02D4, 0x0048, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TMS__SDMA_EXT_EVENT01                    = IOMUX_PAD(0x02D4, 0x0048, 6, 0x0614, 0, 0),
+	MX6_PAD_JTAG_TMS__EPIT1_OUT                           = IOMUX_PAD(0x02D4, 0x0048, 8, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_TDO__SJC_TDO                             = IOMUX_PAD(0x02D8, 0x004C, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__GPT2_CAPTURE2                       = IOMUX_PAD(0x02D8, 0x004C, 1, 0x059C, 0, 0),
+	MX6_PAD_JTAG_TDO__SAI2_TX_SYNC                        = IOMUX_PAD(0x02D8, 0x004C, 2, 0x05FC, 0, 0),
+	MX6_PAD_JTAG_TDO__CCM_CLKO2                           = IOMUX_PAD(0x02D8, 0x004C, 3, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__CCM_STOP                            = IOMUX_PAD(0x02D8, 0x004C, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__GPIO1_IO12                          = IOMUX_PAD(0x02D8, 0x004C, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__MQS_RIGHT                           = IOMUX_PAD(0x02D8, 0x004C, 6, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDO__EPIT2_OUT                           = IOMUX_PAD(0x02D8, 0x004C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_TDI__SJC_TDI                             = IOMUX_PAD(0x02DC, 0x0050, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__GPT2_COMPARE1                       = IOMUX_PAD(0x02DC, 0x0050, 1, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__SAI2_TX_BCLK                        = IOMUX_PAD(0x02DC, 0x0050, 2, 0x05F8, 0, 0),
+	MX6_PAD_JTAG_TDI__PWM6_OUT                            = IOMUX_PAD(0x02DC, 0x0050, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__GPIO1_IO13                          = IOMUX_PAD(0x02DC, 0x0050, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__MQS_LEFT                            = IOMUX_PAD(0x02DC, 0x0050, 6, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TDI__SIM1_POWER_FAIL                     = IOMUX_PAD(0x02DC, 0x0050, 8, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_TCK__SJC_TCK                             = IOMUX_PAD(0x02E0, 0x0054, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TCK__GPT2_COMPARE2                       = IOMUX_PAD(0x02E0, 0x0054, 1, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TCK__SAI2_RX_DATA                        = IOMUX_PAD(0x02E0, 0x0054, 2, 0x05F4, 0, 0),
+	MX6_PAD_JTAG_TCK__PWM7_OUT                            = IOMUX_PAD(0x02E0, 0x0054, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TCK__GPIO1_IO14                          = IOMUX_PAD(0x02E0, 0x0054, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TCK__SIM2_POWER_FAIL                     = IOMUX_PAD(0x02E0, 0x0054, 8, 0x0000, 0, 0),
+
+	MX6_PAD_JTAG_TRST_B__SJC_TRSTB                        = IOMUX_PAD(0x02E4, 0x0058, 0, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__GPT2_COMPARE3                    = IOMUX_PAD(0x02E4, 0x0058, 1, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__SAI2_TX_DATA                     = IOMUX_PAD(0x02E4, 0x0058, 2, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__PWM8_OUT                         = IOMUX_PAD(0x02E4, 0x0058, 4, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__GPIO1_IO15                       = IOMUX_PAD(0x02E4, 0x0058, 5, 0x0000, 0, 0),
+	MX6_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS                 = IOMUX_PAD(0x02E4, 0x0058, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO00__I2C2_SCL                          = IOMUX_PAD(0x02E8, 0x005C, IOMUX_CONFIG_SION | 0, 0x05AC, 1, 0),
+	MX6_PAD_GPIO1_IO00__GPT1_CAPTURE1                     = IOMUX_PAD(0x02E8, 0x005C, 1, 0x058C, 0, 0),
+	MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID                    = IOMUX_PAD(0x02E8, 0x005C, 2, 0x04B8, 0, 0),
+	MX6_PAD_GPIO1_IO00__ENET1_REF_CLK1                    = IOMUX_PAD(0x02E8, 0x005C, 3, 0x0574, 0, 0),
+	MX6_PAD_GPIO1_IO00__MQS_RIGHT                         = IOMUX_PAD(0x02E8, 0x005C, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO00__GPIO1_IO00                        = IOMUX_PAD(0x02E8, 0x005C, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN              = IOMUX_PAD(0x02E8, 0x005C, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO00__SRC_SYSTEM_RESET                  = IOMUX_PAD(0x02E8, 0x005C, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO00__WDOG3_WDOG_B                      = IOMUX_PAD(0x02E8, 0x005C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO01__I2C2_SDA                          = IOMUX_PAD(0x02EC, 0x0060, IOMUX_CONFIG_SION | 0, 0x05B0, 1, 0),
+	MX6_PAD_GPIO1_IO01__GPT1_COMPARE1                     = IOMUX_PAD(0x02EC, 0x0060, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__USB_OTG1_OC                       = IOMUX_PAD(0x02EC, 0x0060, 2, 0x0664, 0, 0),
+	MX6_PAD_GPIO1_IO01__ENET2_REF_CLK2                    = IOMUX_PAD(0x02EC, 0x0060, 3, 0x057C, 0, 0),
+	MX6_PAD_GPIO1_IO01__MQS_LEFT                          = IOMUX_PAD(0x02EC, 0x0060, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__GPIO1_IO01                        = IOMUX_PAD(0x02EC, 0x0060, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT             = IOMUX_PAD(0x02EC, 0x0060, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__SRC_EARLY_RESET                   = IOMUX_PAD(0x02EC, 0x0060, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO01__WDOG1_WDOG_B                      = IOMUX_PAD(0x02EC, 0x0060, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO02__I2C1_SCL                          = IOMUX_PAD(0x02F0, 0x0064, IOMUX_CONFIG_SION | 0, 0x05A4, 0, 0),
+	MX6_PAD_GPIO1_IO02__GPT1_COMPARE2                     = IOMUX_PAD(0x02F0, 0x0064, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__USB_OTG2_PWR                      = IOMUX_PAD(0x02F0, 0x0064, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__ENET1_REF_CLK_25M                 = IOMUX_PAD(0x02F0, 0x0064, 3, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__USDHC1_WP                         = IOMUX_PAD(0x02F0, 0x0064, 4, 0x066C, 0, 0),
+	MX6_PAD_GPIO1_IO02__GPIO1_IO02                        = IOMUX_PAD(0x02F0, 0x0064, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__SDMA_EXT_EVENT00                  = IOMUX_PAD(0x02F0, 0x0064, 6, 0x0610, 1, 0),
+	MX6_PAD_GPIO1_IO02__SRC_ANY_PU_RESET                  = IOMUX_PAD(0x02F0, 0x0064, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__UART1_DCE_TX                      = IOMUX_PAD(0x02F0, 0x0064, 8, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO02__UART1_DTE_RX                      = IOMUX_PAD(0x02F0, 0x0064, 8, 0x0624, 0, 0),
+
+	MX6_PAD_GPIO1_IO03__I2C1_SDA                          = IOMUX_PAD(0x02F4, 0x0068, IOMUX_CONFIG_SION | 0, 0x05A8, 1, 0),
+	MX6_PAD_GPIO1_IO03__GPT1_COMPARE3                     = IOMUX_PAD(0x02F4, 0x0068, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO03__USB_OTG2_OC                       = IOMUX_PAD(0x02F4, 0x0068, 2, 0x0660, 0, 0),
+	MX6_PAD_GPIO1_IO03__USDHC1_CD_B                       = IOMUX_PAD(0x02F4, 0x0068, 4, 0x0668, 0, 0),
+	MX6_PAD_GPIO1_IO03__GPIO1_IO03                        = IOMUX_PAD(0x02F4, 0x0068, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK                   = IOMUX_PAD(0x02F4, 0x0068, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO03__SRC_TESTER_ACK                    = IOMUX_PAD(0x02F4, 0x0068, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO03__UART1_DCE_RX                      = IOMUX_PAD(0x02F4, 0x0068, 8, 0x0624, 1, 0),
+	MX6_PAD_GPIO1_IO03__UART1_DTE_TX                      = IOMUX_PAD(0x02F4, 0x0068, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO04__ENET1_REF_CLK1                    = IOMUX_PAD(0x02F8, 0x006C, 0, 0x0574, 1, 0),
+	MX6_PAD_GPIO1_IO04__PWM3_OUT                          = IOMUX_PAD(0x02F8, 0x006C, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__USB_OTG1_PWR                      = IOMUX_PAD(0x02F8, 0x006C, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__USDHC1_RESET_B                    = IOMUX_PAD(0x02F8, 0x006C, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__GPIO1_IO04                        = IOMUX_PAD(0x02F8, 0x006C, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN              = IOMUX_PAD(0x02F8, 0x006C, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__UART5_DCE_TX                      = IOMUX_PAD(0x02F8, 0x006C, 8, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO04__UART5_DTE_RX                      = IOMUX_PAD(0x02F8, 0x006C, 8, 0x0644, 2, 0),
+
+	MX6_PAD_GPIO1_IO05__ENET2_REF_CLK2                    = IOMUX_PAD(0x02FC, 0x0070, 0, 0x057C, 1, 0),
+	MX6_PAD_GPIO1_IO05__PWM4_OUT                          = IOMUX_PAD(0x02FC, 0x0070, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID                    = IOMUX_PAD(0x02FC, 0x0070, 2, 0x04BC, 0, 0),
+	MX6_PAD_GPIO1_IO05__CSI_FIELD                         = IOMUX_PAD(0x02FC, 0x0070, 3, 0x0530, 0, 0),
+	MX6_PAD_GPIO1_IO05__USDHC1_VSELECT                    = IOMUX_PAD(0x02FC, 0x0070, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO05__GPIO1_IO05                        = IOMUX_PAD(0x02FC, 0x0070, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT             = IOMUX_PAD(0x02FC, 0x0070, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO05__UART5_DCE_RX                      = IOMUX_PAD(0x02FC, 0x0070, 8, 0x0644, 3, 0),
+	MX6_PAD_GPIO1_IO05__UART5_DTE_TX                      = IOMUX_PAD(0x02FC, 0x0070, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO06__ENET1_MDIO                        = IOMUX_PAD(0x0300, 0x0074, 0, 0x0578, 0, 0),
+	MX6_PAD_GPIO1_IO06__ENET2_MDIO                        = IOMUX_PAD(0x0300, 0x0074, 1, 0x0580, 0, 0),
+	MX6_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE                  = IOMUX_PAD(0x0300, 0x0074, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__CSI_MCLK                          = IOMUX_PAD(0x0300, 0x0074, 3, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__USDHC2_WP                         = IOMUX_PAD(0x0300, 0x0074, 4, 0x069C, 0, 0),
+	MX6_PAD_GPIO1_IO06__GPIO1_IO06                        = IOMUX_PAD(0x0300, 0x0074, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__CCM_WAIT                          = IOMUX_PAD(0x0300, 0x0074, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__CCM_REF_EN_B                      = IOMUX_PAD(0x0300, 0x0074, 7, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__UART1_DCE_CTS                     = IOMUX_PAD(0x0300, 0x0074, 8, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO06__UART1_DTE_RTS                     = IOMUX_PAD(0x0300, 0x0074, 8, 0x0620, 0, 0),
+
+	MX6_PAD_GPIO1_IO07__ENET1_MDC                         = IOMUX_PAD(0x0304, 0x0078, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__ENET2_MDC                         = IOMUX_PAD(0x0304, 0x0078, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__USB_OTG_HOST_MODE                 = IOMUX_PAD(0x0304, 0x0078, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__CSI_PIXCLK                        = IOMUX_PAD(0x0304, 0x0078, 3, 0x0528, 0, 0),
+	MX6_PAD_GPIO1_IO07__USDHC2_CD_B                       = IOMUX_PAD(0x0304, 0x0078, 4, 0x0674, 1, 0),
+	MX6_PAD_GPIO1_IO07__GPIO1_IO07                        = IOMUX_PAD(0x0304, 0x0078, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__CCM_STOP                          = IOMUX_PAD(0x0304, 0x0078, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO07__UART1_DCE_RTS                     = IOMUX_PAD(0x0304, 0x0078, 8, 0x0620, 1, 0),
+	MX6_PAD_GPIO1_IO07__UART1_DTE_CTS                     = IOMUX_PAD(0x0304, 0x0078, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO08__PWM1_OUT                          = IOMUX_PAD(0x0308, 0x007C, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__WDOG1_WDOG_B                      = IOMUX_PAD(0x0308, 0x007C, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__SPDIF_OUT                         = IOMUX_PAD(0x0308, 0x007C, 2, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__CSI_VSYNC                         = IOMUX_PAD(0x0308, 0x007C, 3, 0x052C, 1, 0),
+	MX6_PAD_GPIO1_IO08__USDHC2_VSELECT                    = IOMUX_PAD(0x0308, 0x007C, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__GPIO1_IO08                        = IOMUX_PAD(0x0308, 0x007C, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO08__CCM_PMIC_RDY                      = IOMUX_PAD(0x0308, 0x007C, 6, 0x04C0, 1, 0),
+	MX6_PAD_GPIO1_IO08__UART5_DCE_RTS                     = IOMUX_PAD(0x0308, 0x007C, 8, 0x0640, 1, 0),
+	MX6_PAD_GPIO1_IO08__UART5_DTE_CTS                     = IOMUX_PAD(0x0308, 0x007C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_GPIO1_IO09__PWM2_OUT                          = IOMUX_PAD(0x030C, 0x0080, 0, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__WDOG1_WDOG_ANY                    = IOMUX_PAD(0x030C, 0x0080, 1, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__SPDIF_IN                          = IOMUX_PAD(0x030C, 0x0080, 2, 0x0618, 0, 0),
+	MX6_PAD_GPIO1_IO09__CSI_HSYNC                         = IOMUX_PAD(0x030C, 0x0080, 3, 0x0524, 1, 0),
+	MX6_PAD_GPIO1_IO09__USDHC2_RESET_B                    = IOMUX_PAD(0x030C, 0x0080, 4, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__GPIO1_IO09                        = IOMUX_PAD(0x030C, 0x0080, 5, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__USDHC1_RESET_B                    = IOMUX_PAD(0x030C, 0x0080, 6, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__UART5_DCE_CTS                     = IOMUX_PAD(0x030C, 0x0080, 8, 0x0000, 0, 0),
+	MX6_PAD_GPIO1_IO09__UART5_DTE_RTS                     = IOMUX_PAD(0x030C, 0x0080, 8, 0x0640, 2, 0),
+
+	MX6_PAD_UART1_TX_DATA__UART1_DCE_TX                   = IOMUX_PAD(0x0310, 0x0084, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART1_TX_DATA__UART1_DTE_RX                   = IOMUX_PAD(0x0310, 0x0084, 0, 0x0624, 2, 0),
+	MX6_PAD_UART1_TX_DATA__ENET1_RDATA02                  = IOMUX_PAD(0x0310, 0x0084, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_TX_DATA__I2C3_SCL                       = IOMUX_PAD(0x0310, 0x0084, IOMUX_CONFIG_SION | 2, 0x05B4, 0, 0),
+	MX6_PAD_UART1_TX_DATA__CSI_DATA02                     = IOMUX_PAD(0x0310, 0x0084, 3, 0x04C4, 1, 0),
+	MX6_PAD_UART1_TX_DATA__GPT1_COMPARE1                  = IOMUX_PAD(0x0310, 0x0084, 4, 0x0000, 0, 0),
+	MX6_PAD_UART1_TX_DATA__GPIO1_IO16                     = IOMUX_PAD(0x0310, 0x0084, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_TX_DATA__SPDIF_OUT                      = IOMUX_PAD(0x0310, 0x0084, 8, 0x0000, 0, 0),
+
+	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX                   = IOMUX_PAD(0x0314, 0x0088, 0, 0x0624, 3, 0),
+
+	MX6_PAD_UART1_RX_DATA__UART1_DTE_TX                   = IOMUX_PAD(0x0314, 0x0088, 0, 0x0000, 0, 0),
+	MX6_PAD_UART1_RX_DATA__ENET1_RDATA03                  = IOMUX_PAD(0x0314, 0x0088, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_RX_DATA__I2C3_SDA                       = IOMUX_PAD(0x0314, 0x0088, IOMUX_CONFIG_SION | 2, 0x05B8, 0, 0),
+	MX6_PAD_UART1_RX_DATA__CSI_DATA03                     = IOMUX_PAD(0x0314, 0x0088, 3, 0x04C8, 1, 0),
+	MX6_PAD_UART1_RX_DATA__GPT1_CLK                       = IOMUX_PAD(0x0314, 0x0088, 4, 0x0594, 0, 0),
+	MX6_PAD_UART1_RX_DATA__GPIO1_IO17                     = IOMUX_PAD(0x0314, 0x0088, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_RX_DATA__SPDIF_IN                       = IOMUX_PAD(0x0314, 0x0088, 8, 0x0618, 1, 0),
+
+	MX6_PAD_UART1_CTS_B__UART1_DCE_CTS                    = IOMUX_PAD(0x0318, 0x008C, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART1_CTS_B__UART1_DTE_RTS                    = IOMUX_PAD(0x0318, 0x008C, 0, 0x0620, 2, 0),
+	MX6_PAD_UART1_CTS_B__ENET1_RX_CLK                     = IOMUX_PAD(0x0318, 0x008C, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_CTS_B__USDHC1_WP                        = IOMUX_PAD(0x0318, 0x008C, 2, 0x066C, 1, 0),
+	MX6_PAD_UART1_CTS_B__CSI_DATA04                       = IOMUX_PAD(0x0318, 0x008C, 3, 0x04D8, 0, 0),
+	MX6_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN             = IOMUX_PAD(0x0318, 0x008C, 4, 0x0000, 0, 0),
+	MX6_PAD_UART1_CTS_B__GPIO1_IO18                       = IOMUX_PAD(0x0318, 0x008C, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_CTS_B__USDHC2_WP                        = IOMUX_PAD(0x0318, 0x008C, 8, 0x069C, 1, 0),
+
+	MX6_PAD_UART1_RTS_B__UART1_DCE_RTS                    = IOMUX_PAD(0x031C, 0x0090, 0, 0x0620, 3, 0),
+
+	MX6_PAD_UART1_RTS_B__UART1_DTE_CTS                    = IOMUX_PAD(0x031C, 0x0090, 0, 0x0000, 0, 0),
+	MX6_PAD_UART1_RTS_B__ENET1_TX_ER                      = IOMUX_PAD(0x031C, 0x0090, 1, 0x0000, 0, 0),
+	MX6_PAD_UART1_RTS_B__USDHC1_CD_B                      = IOMUX_PAD(0x031C, 0x0090, 2, 0x0668, 1, 0),
+	MX6_PAD_UART1_RTS_B__CSI_DATA05                       = IOMUX_PAD(0x031C, 0x0090, 3, 0x04CC, 1, 0),
+	MX6_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT            = IOMUX_PAD(0x031C, 0x0090, 4, 0x0000, 0, 0),
+	MX6_PAD_UART1_RTS_B__GPIO1_IO19                       = IOMUX_PAD(0x031C, 0x0090, 5, 0x0000, 0, 0),
+	MX6_PAD_UART1_RTS_B__USDHC2_CD_B                      = IOMUX_PAD(0x031C, 0x0090, 8, 0x0674, 2, 0),
+
+	MX6_PAD_UART2_TX_DATA__UART2_DCE_TX                   = IOMUX_PAD(0x0320, 0x0094, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART2_TX_DATA__UART2_DTE_RX                   = IOMUX_PAD(0x0320, 0x0094, 0, 0x062C, 0, 0),
+	MX6_PAD_UART2_TX_DATA__ENET1_TDATA02                  = IOMUX_PAD(0x0320, 0x0094, 1, 0x0000, 0, 0),
+	MX6_PAD_UART2_TX_DATA__I2C4_SCL                       = IOMUX_PAD(0x0320, 0x0094, IOMUX_CONFIG_SION | 2, 0x05BC, 0, 0),
+	MX6_PAD_UART2_TX_DATA__CSI_DATA06                     = IOMUX_PAD(0x0320, 0x0094, 3, 0x04DC, 0, 0),
+	MX6_PAD_UART2_TX_DATA__GPT1_CAPTURE1                  = IOMUX_PAD(0x0320, 0x0094, 4, 0x058C, 1, 0),
+	MX6_PAD_UART2_TX_DATA__GPIO1_IO20                     = IOMUX_PAD(0x0320, 0x0094, 5, 0x0000, 0, 0),
+	MX6_PAD_UART2_TX_DATA__ECSPI3_SS0                     = IOMUX_PAD(0x0320, 0x0094, 8, 0x0560, 0, 0),
+
+	MX6_PAD_UART2_RX_DATA__UART2_DCE_RX                   = IOMUX_PAD(0x0324, 0x0098, 0, 0x062C, 1, 0),
+
+	MX6_PAD_UART2_RX_DATA__UART2_DTE_TX                   = IOMUX_PAD(0x0324, 0x0098, 0, 0x0000, 0, 0),
+	MX6_PAD_UART2_RX_DATA__ENET1_TDATA03                  = IOMUX_PAD(0x0324, 0x0098, 1, 0x0000, 0, 0),
+	MX6_PAD_UART2_RX_DATA__I2C4_SDA                       = IOMUX_PAD(0x0324, 0x0098, IOMUX_CONFIG_SION | 2, 0x05C0, 0, 0),
+	MX6_PAD_UART2_RX_DATA__CSI_DATA07                     = IOMUX_PAD(0x0324, 0x0098, 3, 0x04E0, 0, 0),
+	MX6_PAD_UART2_RX_DATA__GPT1_CAPTURE2                  = IOMUX_PAD(0x0324, 0x0098, 4, 0x0590, 0, 0),
+	MX6_PAD_UART2_RX_DATA__GPIO1_IO21                     = IOMUX_PAD(0x0324, 0x0098, 5, 0x0000, 0, 0),
+	MX6_PAD_UART2_RX_DATA__SJC_DONE                       = IOMUX_PAD(0x0324, 0x0098, 7, 0x0000, 0, 0),
+	MX6_PAD_UART2_RX_DATA__ECSPI3_SCLK                    = IOMUX_PAD(0x0324, 0x0098, 8, 0x0554, 0, 0),
+
+	MX6_PAD_UART2_CTS_B__UART2_DCE_CTS                    = IOMUX_PAD(0x0328, 0x009C, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART2_CTS_B__UART2_DTE_RTS                    = IOMUX_PAD(0x0328, 0x009C, 0, 0x0628, 0, 0),
+	MX6_PAD_UART2_CTS_B__ENET1_CRS                        = IOMUX_PAD(0x0328, 0x009C, 1, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__FLEXCAN2_TX                      = IOMUX_PAD(0x0328, 0x009C, 2, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__CSI_DATA08                       = IOMUX_PAD(0x0328, 0x009C, 3, 0x04E4, 0, 0),
+	MX6_PAD_UART2_CTS_B__GPT1_COMPARE2                    = IOMUX_PAD(0x0328, 0x009C, 4, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__GPIO1_IO22                       = IOMUX_PAD(0x0328, 0x009C, 5, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__SJC_DE_B                         = IOMUX_PAD(0x0328, 0x009C, 7, 0x0000, 0, 0),
+	MX6_PAD_UART2_CTS_B__ECSPI3_MOSI                      = IOMUX_PAD(0x0328, 0x009C, 8, 0x055C, 0, 0),
+
+	MX6_PAD_UART2_RTS_B__UART2_DCE_RTS                    = IOMUX_PAD(0x032C, 0x00A0, 0, 0x0628, 1, 0),
+
+	MX6_PAD_UART2_RTS_B__UART2_DTE_CTS                    = IOMUX_PAD(0x032C, 0x00A0, 0, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__ENET1_COL                        = IOMUX_PAD(0x032C, 0x00A0, 1, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__FLEXCAN2_RX                      = IOMUX_PAD(0x032C, 0x00A0, 2, 0x0588, 0, 0),
+	MX6_PAD_UART2_RTS_B__CSI_DATA09                       = IOMUX_PAD(0x032C, 0x00A0, 3, 0x04E8, 0, 0),
+	MX6_PAD_UART2_RTS_B__GPT1_COMPARE3                    = IOMUX_PAD(0x032C, 0x00A0, 4, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__GPIO1_IO23                       = IOMUX_PAD(0x032C, 0x00A0, 5, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__SJC_FAIL                         = IOMUX_PAD(0x032C, 0x00A0, 7, 0x0000, 0, 0),
+	MX6_PAD_UART2_RTS_B__ECSPI3_MISO                      = IOMUX_PAD(0x032C, 0x00A0, 8, 0x0558, 0, 0),
+
+	MX6_PAD_UART3_TX_DATA__UART3_DCE_TX                   = IOMUX_PAD(0x0330, 0x00A4, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART3_TX_DATA__UART3_DTE_RX                   = IOMUX_PAD(0x0330, 0x00A4, 0, 0x0634, 0, 0),
+	MX6_PAD_UART3_TX_DATA__ENET2_RDATA02                  = IOMUX_PAD(0x0330, 0x00A4, 1, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__SIM1_PORT0_PD                  = IOMUX_PAD(0x0330, 0x00A4, 2, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__CSI_DATA01                     = IOMUX_PAD(0x0330, 0x00A4, 3, 0x04D4, 0, 0),
+	MX6_PAD_UART3_TX_DATA__UART2_DCE_CTS                  = IOMUX_PAD(0x0330, 0x00A4, 4, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__UART2_DTE_RTS                  = IOMUX_PAD(0x0330, 0x00A4, 4, 0x0628, 2, 0),
+	MX6_PAD_UART3_TX_DATA__GPIO1_IO24                     = IOMUX_PAD(0x0330, 0x00A4, 5, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__SJC_JTAG_ACT                   = IOMUX_PAD(0x0330, 0x00A4, 7, 0x0000, 0, 0),
+	MX6_PAD_UART3_TX_DATA__ANATOP_OTG1_ID                 = IOMUX_PAD(0x0330, 0x00A4, 8, 0x04B8, 1, 0),
+
+	MX6_PAD_UART3_RX_DATA__UART3_DCE_RX                   = IOMUX_PAD(0x0334, 0x00A8, 0, 0x0634, 1, 0),
+
+	MX6_PAD_UART3_RX_DATA__UART3_DTE_TX                   = IOMUX_PAD(0x0334, 0x00A8, 0, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__ENET2_RDATA03                  = IOMUX_PAD(0x0334, 0x00A8, 1, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__SIM2_PORT0_PD                  = IOMUX_PAD(0x0334, 0x00A8, 2, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__CSI_DATA00                     = IOMUX_PAD(0x0334, 0x00A8, 3, 0x04D0, 0, 0),
+	MX6_PAD_UART3_RX_DATA__UART2_DCE_RTS                  = IOMUX_PAD(0x0334, 0x00A8, 4, 0x0628, 3, 0),
+	MX6_PAD_UART3_RX_DATA__UART2_DTE_CTS                  = IOMUX_PAD(0x0334, 0x00A8, 4, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__GPIO1_IO25                     = IOMUX_PAD(0x0334, 0x00A8, 5, 0x0000, 0, 0),
+	MX6_PAD_UART3_RX_DATA__EPIT1_OUT                      = IOMUX_PAD(0x0334, 0x00A8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_UART3_CTS_B__UART3_DCE_CTS                    = IOMUX_PAD(0x0338, 0x00AC, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART3_CTS_B__UART3_DTE_RTS                    = IOMUX_PAD(0x0338, 0x00AC, 0, 0x0630, 0, 0),
+	MX6_PAD_UART3_CTS_B__ENET2_RX_CLK                     = IOMUX_PAD(0x0338, 0x00AC, IOMUX_CONFIG_SION | 1, 0x0000, 0, 0),
+	MX6_PAD_UART3_CTS_B__FLEXCAN1_TX                      = IOMUX_PAD(0x0338, 0x00AC, 2, 0x0000, 0, 0),
+	MX6_PAD_UART3_CTS_B__CSI_DATA10                       = IOMUX_PAD(0x0338, 0x00AC, 3, 0x04EC, 0, 0),
+	MX6_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN             = IOMUX_PAD(0x0338, 0x00AC, 4, 0x0000, 0, 0),
+	MX6_PAD_UART3_CTS_B__GPIO1_IO26                       = IOMUX_PAD(0x0338, 0x00AC, 5, 0x0000, 0, 0),
+	MX6_PAD_UART3_CTS_B__EPIT2_OUT                        = IOMUX_PAD(0x0338, 0x00AC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_UART3_RTS_B__UART3_DCE_RTS                    = IOMUX_PAD(0x033C, 0x00B0, 0, 0x0630, 1, 0),
+
+	MX6_PAD_UART3_RTS_B__UART3_DTE_CTS                    = IOMUX_PAD(0x033C, 0x00B0, 0, 0x0000, 0, 0),
+	MX6_PAD_UART3_RTS_B__ENET2_TX_ER                      = IOMUX_PAD(0x033C, 0x00B0, 1, 0x0000, 0, 0),
+	MX6_PAD_UART3_RTS_B__FLEXCAN1_RX                      = IOMUX_PAD(0x033C, 0x00B0, 2, 0x0584, 0, 0),
+	MX6_PAD_UART3_RTS_B__CSI_DATA11                       = IOMUX_PAD(0x033C, 0x00B0, 3, 0x04F0, 0, 0),
+	MX6_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT            = IOMUX_PAD(0x033C, 0x00B0, 4, 0x0000, 0, 0),
+	MX6_PAD_UART3_RTS_B__GPIO1_IO27                       = IOMUX_PAD(0x033C, 0x00B0, 5, 0x0000, 0, 0),
+	MX6_PAD_UART3_RTS_B__WDOG1_WDOG_B                     = IOMUX_PAD(0x033C, 0x00B0, 8, 0x0000, 0, 0),
+
+	MX6_PAD_UART4_TX_DATA__UART4_DCE_TX                   = IOMUX_PAD(0x0340, 0x00B4, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART4_TX_DATA__UART4_DTE_RX                   = IOMUX_PAD(0x0340, 0x00B4, 0, 0x063C, 0, 0),
+	MX6_PAD_UART4_TX_DATA__ENET2_TDATA02                  = IOMUX_PAD(0x0340, 0x00B4, 1, 0x0000, 0, 0),
+	MX6_PAD_UART4_TX_DATA__I2C1_SCL                       = IOMUX_PAD(0x0340, 0x00B4, IOMUX_CONFIG_SION | 2, 0x05A4, 1, 0),
+	MX6_PAD_UART4_TX_DATA__CSI_DATA12                     = IOMUX_PAD(0x0340, 0x00B4, 3, 0x04F4, 0, 0),
+	MX6_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02            = IOMUX_PAD(0x0340, 0x00B4, 4, 0x0000, 0, 0),
+	MX6_PAD_UART4_TX_DATA__GPIO1_IO28                     = IOMUX_PAD(0x0340, 0x00B4, 5, 0x0000, 0, 0),
+	MX6_PAD_UART4_TX_DATA__ECSPI2_SCLK                    = IOMUX_PAD(0x0340, 0x00B4, 8, 0x0544, 1, 0),
+
+	MX6_PAD_UART4_RX_DATA__UART4_DCE_RX                   = IOMUX_PAD(0x0344, 0x00B8, 0, 0x063C, 1, 0),
+
+	MX6_PAD_UART4_RX_DATA__UART4_DTE_TX                   = IOMUX_PAD(0x0344, 0x00B8, 0, 0x0000, 0, 0),
+	MX6_PAD_UART4_RX_DATA__ENET2_TDATA03                  = IOMUX_PAD(0x0344, 0x00B8, 1, 0x0000, 0, 0),
+	MX6_PAD_UART4_RX_DATA__I2C1_SDA                       = IOMUX_PAD(0x0344, 0x00B8, IOMUX_CONFIG_SION | 2, 0x05A8, 2, 0),
+	MX6_PAD_UART4_RX_DATA__CSI_DATA13                     = IOMUX_PAD(0x0344, 0x00B8, 3, 0x04F8, 0, 0),
+	MX6_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01            = IOMUX_PAD(0x0344, 0x00B8, 4, 0x0000, 0, 0),
+	MX6_PAD_UART4_RX_DATA__GPIO1_IO29                     = IOMUX_PAD(0x0344, 0x00B8, 5, 0x0000, 0, 0),
+	MX6_PAD_UART4_RX_DATA__ECSPI2_SS0                     = IOMUX_PAD(0x0344, 0x00B8, 8, 0x0550, 1, 0),
+	MX6_PAD_UART5_TX_DATA__GPIO1_IO30                     = IOMUX_PAD(0x0348, 0x00BC, 5, 0x0000, 0, 0),
+	MX6_PAD_UART5_TX_DATA__ECSPI2_MOSI                    = IOMUX_PAD(0x0348, 0x00BC, 8, 0x054C, 0, 0),
+
+	MX6_PAD_UART5_TX_DATA__UART5_DCE_TX                   = IOMUX_PAD(0x0348, 0x00BC, 0, 0x0000, 0, 0),
+
+	MX6_PAD_UART5_TX_DATA__UART5_DTE_RX                   = IOMUX_PAD(0x0348, 0x00BC, 0, 0x0644, 6, 0),
+	MX6_PAD_UART5_TX_DATA__ENET2_CRS                      = IOMUX_PAD(0x0348, 0x00BC, 1, 0x0000, 0, 0),
+	MX6_PAD_UART5_TX_DATA__I2C2_SCL                       = IOMUX_PAD(0x0348, 0x00BC, IOMUX_CONFIG_SION | 2, 0x05AC, 2, 0),
+	MX6_PAD_UART5_TX_DATA__CSI_DATA14                     = IOMUX_PAD(0x0348, 0x00BC, 3, 0x04FC, 0, 0),
+	MX6_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00            = IOMUX_PAD(0x0348, 0x00BC, 4, 0x0000, 0, 0),
+
+	MX6_PAD_UART5_RX_DATA__UART5_DCE_RX                   = IOMUX_PAD(0x034C, 0x00C0, 0, 0x0644, 7, 0),
+
+	MX6_PAD_UART5_RX_DATA__UART5_DTE_TX                   = IOMUX_PAD(0x034C, 0x00C0, 0, 0x0000, 0, 0),
+	MX6_PAD_UART5_RX_DATA__ENET2_COL                      = IOMUX_PAD(0x034C, 0x00C0, 1, 0x0000, 0, 0),
+	MX6_PAD_UART5_RX_DATA__I2C2_SDA                       = IOMUX_PAD(0x034C, 0x00C0, IOMUX_CONFIG_SION | 2, 0x05B0, 2, 0),
+	MX6_PAD_UART5_RX_DATA__CSI_DATA15                     = IOMUX_PAD(0x034C, 0x00C0, 3, 0x0500, 0, 0),
+	MX6_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB                = IOMUX_PAD(0x034C, 0x00C0, 4, 0x0000, 0, 0),
+	MX6_PAD_UART5_RX_DATA__GPIO1_IO31                     = IOMUX_PAD(0x034C, 0x00C0, 5, 0x0000, 0, 0),
+	MX6_PAD_UART5_RX_DATA__ECSPI2_MISO                    = IOMUX_PAD(0x034C, 0x00C0, 8, 0x0548, 1, 0),
+
+	MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00                 = IOMUX_PAD(0x0350, 0x00C4, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__UART4_DCE_RTS                 = IOMUX_PAD(0x0350, 0x00C4, 1, 0x0638, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__UART4_DTE_CTS                 = IOMUX_PAD(0x0350, 0x00C4, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__PWM1_OUT                      = IOMUX_PAD(0x0350, 0x00C4, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__CSI_DATA16                    = IOMUX_PAD(0x0350, 0x00C4, 3, 0x0504, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__FLEXCAN1_TX                   = IOMUX_PAD(0x0350, 0x00C4, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__GPIO2_IO00                    = IOMUX_PAD(0x0350, 0x00C4, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__KPP_ROW00                     = IOMUX_PAD(0x0350, 0x00C4, 6, 0x05D0, 0, 0),
+	MX6_PAD_ENET1_RX_DATA0__USDHC1_LCTL                   = IOMUX_PAD(0x0350, 0x00C4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01                 = IOMUX_PAD(0x0354, 0x00C8, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__UART4_DCE_CTS                 = IOMUX_PAD(0x0354, 0x00C8, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__UART4_DTE_RTS                 = IOMUX_PAD(0x0354, 0x00C8, 1, 0x0638, 1, 0),
+	MX6_PAD_ENET1_RX_DATA1__PWM2_OUT                      = IOMUX_PAD(0x0354, 0x00C8, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__CSI_DATA17                    = IOMUX_PAD(0x0354, 0x00C8, 3, 0x0508, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__FLEXCAN1_RX                   = IOMUX_PAD(0x0354, 0x00C8, 4, 0x0584, 1, 0),
+	MX6_PAD_ENET1_RX_DATA1__GPIO2_IO01                    = IOMUX_PAD(0x0354, 0x00C8, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__KPP_COL00                     = IOMUX_PAD(0x0354, 0x00C8, 6, 0x05C4, 0, 0),
+	MX6_PAD_ENET1_RX_DATA1__USDHC2_LCTL                   = IOMUX_PAD(0x0354, 0x00C8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_RX_EN__ENET1_RX_EN                      = IOMUX_PAD(0x0358, 0x00CC, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_EN__UART5_DCE_RTS                    = IOMUX_PAD(0x0358, 0x00CC, 1, 0x0640, 5, 0),
+	MX6_PAD_ENET1_RX_EN__UART5_DTE_CTS                    = IOMUX_PAD(0x0358, 0x00CC, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_EN__CSI_DATA18                       = IOMUX_PAD(0x0358, 0x00CC, 3, 0x050C, 0, 0),
+	MX6_PAD_ENET1_RX_EN__FLEXCAN2_TX                      = IOMUX_PAD(0x0358, 0x00CC, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_EN__GPIO2_IO02                       = IOMUX_PAD(0x0358, 0x00CC, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_EN__KPP_ROW01                        = IOMUX_PAD(0x0358, 0x00CC, 6, 0x05D4, 0, 0),
+	MX6_PAD_ENET1_RX_EN__USDHC1_VSELECT                   = IOMUX_PAD(0x0358, 0x00CC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00                 = IOMUX_PAD(0x035C, 0x00D0, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__UART5_DCE_CTS                 = IOMUX_PAD(0x035C, 0x00D0, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                 = IOMUX_PAD(0x035C, 0x00D0, 1, 0x0640, 6, 0),
+	MX6_PAD_ENET1_TX_DATA0__CSI_DATA19                    = IOMUX_PAD(0x035C, 0x00D0, 3, 0x0510, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__FLEXCAN2_RX                   = IOMUX_PAD(0x035C, 0x00D0, 4, 0x0588, 1, 0),
+	MX6_PAD_ENET1_TX_DATA0__GPIO2_IO03                    = IOMUX_PAD(0x035C, 0x00D0, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__KPP_COL01                     = IOMUX_PAD(0x035C, 0x00D0, 6, 0x05C8, 0, 0),
+	MX6_PAD_ENET1_TX_DATA0__USDHC2_VSELECT                = IOMUX_PAD(0x035C, 0x00D0, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01                 = IOMUX_PAD(0x0360, 0x00D4, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__UART6_DCE_CTS                 = IOMUX_PAD(0x0360, 0x00D4, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__UART6_DTE_RTS                 = IOMUX_PAD(0x0360, 0x00D4, 1, 0x0648, 2, 0),
+	MX6_PAD_ENET1_TX_DATA1__PWM5_OUT                      = IOMUX_PAD(0x0360, 0x00D4, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__CSI_DATA20                    = IOMUX_PAD(0x0360, 0x00D4, 3, 0x0514, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__ENET2_MDIO                    = IOMUX_PAD(0x0360, 0x00D4, 4, 0x0580, 1, 0),
+	MX6_PAD_ENET1_TX_DATA1__GPIO2_IO04                    = IOMUX_PAD(0x0360, 0x00D4, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__KPP_ROW02                     = IOMUX_PAD(0x0360, 0x00D4, 6, 0x05D8, 0, 0),
+	MX6_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB          = IOMUX_PAD(0x0360, 0x00D4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_TX_EN__ENET1_TX_EN                      = IOMUX_PAD(0x0364, 0x00D8, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__UART6_DCE_RTS                    = IOMUX_PAD(0x0364, 0x00D8, 1, 0x0648, 3, 0),
+	MX6_PAD_ENET1_TX_EN__UART6_DTE_CTS                    = IOMUX_PAD(0x0364, 0x00D8, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__PWM6_OUT                         = IOMUX_PAD(0x0364, 0x00D8, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__CSI_DATA21                       = IOMUX_PAD(0x0364, 0x00D8, 3, 0x0518, 0, 0),
+	MX6_PAD_ENET1_TX_EN__ENET2_MDC                        = IOMUX_PAD(0x0364, 0x00D8, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__GPIO2_IO05                       = IOMUX_PAD(0x0364, 0x00D8, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_EN__KPP_COL02                        = IOMUX_PAD(0x0364, 0x00D8, 6, 0x05CC, 0, 0),
+	MX6_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB             = IOMUX_PAD(0x0364, 0x00D8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET1_TX_CLK__ENET1_TX_CLK                    = IOMUX_PAD(0x0368, 0x00DC, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__UART7_DCE_CTS                   = IOMUX_PAD(0x0368, 0x00DC, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__UART7_DTE_RTS                   = IOMUX_PAD(0x0368, 0x00DC, 1, 0x0650, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__PWM7_OUT                        = IOMUX_PAD(0x0368, 0x00DC, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__CSI_DATA22                      = IOMUX_PAD(0x0368, 0x00DC, 3, 0x051C, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                  = IOMUX_PAD(0x0368, 0x00DC, IOMUX_CONFIG_SION | 4, 0x0574, 2, 0),
+	MX6_PAD_ENET1_TX_CLK__GPIO2_IO06                      = IOMUX_PAD(0x0368, 0x00DC, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__KPP_ROW03                       = IOMUX_PAD(0x0368, 0x00DC, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET1_TX_CLK__GPT1_CLK                        = IOMUX_PAD(0x0368, 0x00DC, 8, 0x0594, 1, 0),
+
+	MX6_PAD_ENET1_RX_ER__ENET1_RX_ER                      = IOMUX_PAD(0x036C, 0x00E0, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__UART7_DCE_RTS                    = IOMUX_PAD(0x036C, 0x00E0, 1, 0x0650, 1, 0),
+	MX6_PAD_ENET1_RX_ER__UART7_DTE_CTS                    = IOMUX_PAD(0x036C, 0x00E0, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__PWM8_OUT                         = IOMUX_PAD(0x036C, 0x00E0, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__CSI_DATA23                       = IOMUX_PAD(0x036C, 0x00E0, 3, 0x0520, 0, 0),
+	MX6_PAD_ENET1_RX_ER__EIM_CRE                          = IOMUX_PAD(0x036C, 0x00E0, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__GPIO2_IO07                       = IOMUX_PAD(0x036C, 0x00E0, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__KPP_COL03                        = IOMUX_PAD(0x036C, 0x00E0, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET1_RX_ER__GPT1_CAPTURE2                    = IOMUX_PAD(0x036C, 0x00E0, 8, 0x0590, 1, 0),
+
+	MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00                 = IOMUX_PAD(0x0370, 0x00E4, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__UART6_DCE_TX                  = IOMUX_PAD(0x0370, 0x00E4, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__UART6_DTE_RX                  = IOMUX_PAD(0x0370, 0x00E4, 1, 0x064C, 1, 0),
+	MX6_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD               = IOMUX_PAD(0x0370, 0x00E4, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__I2C3_SCL                      = IOMUX_PAD(0x0370, 0x00E4, IOMUX_CONFIG_SION | 3, 0x05B4, 1, 0),
+	MX6_PAD_ENET2_RX_DATA0__ENET1_MDIO                    = IOMUX_PAD(0x0370, 0x00E4, 4, 0x0578, 1, 0),
+	MX6_PAD_ENET2_RX_DATA0__GPIO2_IO08                    = IOMUX_PAD(0x0370, 0x00E4, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__KPP_ROW04                     = IOMUX_PAD(0x0370, 0x00E4, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA0__USB_OTG1_PWR                  = IOMUX_PAD(0x0370, 0x00E4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01                 = IOMUX_PAD(0x0374, 0x00E8, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__UART6_DCE_RX                  = IOMUX_PAD(0x0374, 0x00E8, 1, 0x064C, 2, 0),
+	MX6_PAD_ENET2_RX_DATA1__UART6_DTE_TX                  = IOMUX_PAD(0x0374, 0x00E8, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK                = IOMUX_PAD(0x0374, 0x00E8, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__I2C3_SDA                      = IOMUX_PAD(0x0374, 0x00E8, IOMUX_CONFIG_SION | 3, 0x05B8, 1, 0),
+	MX6_PAD_ENET2_RX_DATA1__ENET1_MDC                     = IOMUX_PAD(0x0374, 0x00E8, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__GPIO2_IO09                    = IOMUX_PAD(0x0374, 0x00E8, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__KPP_COL04                     = IOMUX_PAD(0x0374, 0x00E8, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_DATA1__USB_OTG1_OC                   = IOMUX_PAD(0x0374, 0x00E8, 8, 0x0664, 1, 0),
+
+	MX6_PAD_ENET2_RX_EN__ENET2_RX_EN                      = IOMUX_PAD(0x0378, 0x00EC, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__UART7_DCE_TX                     = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__UART7_DTE_RX                     = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0654, 0, 0),
+	MX6_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B                 = IOMUX_PAD(0x0378, 0x00EC, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__I2C4_SCL                         = IOMUX_PAD(0x0378, 0x00EC, IOMUX_CONFIG_SION | 3, 0x05BC, 1, 0),
+	MX6_PAD_ENET2_RX_EN__EIM_ADDR26                       = IOMUX_PAD(0x0378, 0x00EC, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__GPIO2_IO10                       = IOMUX_PAD(0x0378, 0x00EC, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__KPP_ROW05                        = IOMUX_PAD(0x0378, 0x00EC, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M                = IOMUX_PAD(0x0378, 0x00EC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00                 = IOMUX_PAD(0x037C, 0x00F0, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX                  = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0654, 1, 0),
+	MX6_PAD_ENET2_TX_DATA0__UART7_DTE_TX                  = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN               = IOMUX_PAD(0x037C, 0x00F0, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__I2C4_SDA                      = IOMUX_PAD(0x037C, 0x00F0, IOMUX_CONFIG_SION | 3, 0x05C0, 1, 0),
+	MX6_PAD_ENET2_TX_DATA0__EIM_EB_B02                    = IOMUX_PAD(0x037C, 0x00F0, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__GPIO2_IO11                    = IOMUX_PAD(0x037C, 0x00F0, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA0__KPP_COL05                     = IOMUX_PAD(0x037C, 0x00F0, 6, 0x0000, 0, 0),
+
+	MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01                 = IOMUX_PAD(0x0380, 0x00F4, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__UART8_DCE_TX                  = IOMUX_PAD(0x0380, 0x00F4, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__UART8_DTE_RX                  = IOMUX_PAD(0x0380, 0x00F4, 1, 0x065C, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD               = IOMUX_PAD(0x0380, 0x00F4, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__ECSPI4_SCLK                   = IOMUX_PAD(0x0380, 0x00F4, 3, 0x0564, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__EIM_EB_B03                    = IOMUX_PAD(0x0380, 0x00F4, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__GPIO2_IO12                    = IOMUX_PAD(0x0380, 0x00F4, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__KPP_ROW06                     = IOMUX_PAD(0x0380, 0x00F4, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_DATA1__USB_OTG2_PWR                  = IOMUX_PAD(0x0380, 0x00F4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_ENET2_TX_EN__ENET2_TX_EN                      = IOMUX_PAD(0x0384, 0x00F8, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__UART8_DCE_RX                     = IOMUX_PAD(0x0384, 0x00F8, 1, 0x065C, 1, 0),
+	MX6_PAD_ENET2_TX_EN__UART8_DTE_TX                     = IOMUX_PAD(0x0384, 0x00F8, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__SIM2_PORT0_CLK                   = IOMUX_PAD(0x0384, 0x00F8, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__ECSPI4_MOSI                      = IOMUX_PAD(0x0384, 0x00F8, 3, 0x056C, 0, 0),
+	MX6_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN                 = IOMUX_PAD(0x0384, 0x00F8, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__GPIO2_IO13                       = IOMUX_PAD(0x0384, 0x00F8, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__KPP_COL06                        = IOMUX_PAD(0x0384, 0x00F8, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_EN__USB_OTG2_OC                      = IOMUX_PAD(0x0384, 0x00F8, 8, 0x0660, 1, 0),
+
+	MX6_PAD_ENET2_TX_CLK__ENET2_TX_CLK                    = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__UART8_DCE_CTS                   = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__UART8_DTE_RTS                   = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0658, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B                = IOMUX_PAD(0x0388, 0x00FC, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__ECSPI4_MISO                     = IOMUX_PAD(0x0388, 0x00FC, 3, 0x0568, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                  = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 4, 0x057C, 2, 0),
+	MX6_PAD_ENET2_TX_CLK__GPIO2_IO14                      = IOMUX_PAD(0x0388, 0x00FC, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__KPP_ROW07                       = IOMUX_PAD(0x0388, 0x00FC, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID                  = IOMUX_PAD(0x0388, 0x00FC, 8, 0x04BC, 1, 0),
+
+	MX6_PAD_ENET2_RX_ER__ENET2_RX_ER                      = IOMUX_PAD(0x038C, 0x0100, 0, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__UART8_DCE_RTS                    = IOMUX_PAD(0x038C, 0x0100, 1, 0x0658, 1, 0),
+	MX6_PAD_ENET2_RX_ER__UART8_DTE_CTS                    = IOMUX_PAD(0x038C, 0x0100, 1, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN                  = IOMUX_PAD(0x038C, 0x0100, 2, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__ECSPI4_SS0                       = IOMUX_PAD(0x038C, 0x0100, 3, 0x0570, 0, 0),
+	MX6_PAD_ENET2_RX_ER__EIM_ADDR25                       = IOMUX_PAD(0x038C, 0x0100, 4, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__GPIO2_IO15                       = IOMUX_PAD(0x038C, 0x0100, 5, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__KPP_COL07                        = IOMUX_PAD(0x038C, 0x0100, 6, 0x0000, 0, 0),
+	MX6_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY                   = IOMUX_PAD(0x038C, 0x0100, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_CLK__LCDIF_CLK                            = IOMUX_PAD(0x0390, 0x0104, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__LCDIF_WR_RWN                         = IOMUX_PAD(0x0390, 0x0104, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__UART4_DCE_TX                         = IOMUX_PAD(0x0390, 0x0104, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__UART4_DTE_RX                         = IOMUX_PAD(0x0390, 0x0104, 2, 0x063C, 2, 0),
+	MX6_PAD_LCD_CLK__SAI3_MCLK                            = IOMUX_PAD(0x0390, 0x0104, 3, 0x0600, 0, 0),
+	MX6_PAD_LCD_CLK__EIM_CS2_B                            = IOMUX_PAD(0x0390, 0x0104, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__GPIO3_IO00                           = IOMUX_PAD(0x0390, 0x0104, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB                 = IOMUX_PAD(0x0390, 0x0104, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_ENABLE__LCDIF_ENABLE                      = IOMUX_PAD(0x0394, 0x0108, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__LCDIF_RD_E                        = IOMUX_PAD(0x0394, 0x0108, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__UART4_DCE_RX                      = IOMUX_PAD(0x0394, 0x0108, 2, 0x063C, 3, 0),
+	MX6_PAD_LCD_ENABLE__UART4_DTE_TX                      = IOMUX_PAD(0x0394, 0x0108, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__SAI3_TX_SYNC                      = IOMUX_PAD(0x0394, 0x0108, 3, 0x060C, 0, 0),
+	MX6_PAD_LCD_ENABLE__EIM_CS3_B                         = IOMUX_PAD(0x0394, 0x0108, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__GPIO3_IO01                        = IOMUX_PAD(0x0394, 0x0108, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_ENABLE__ECSPI2_RDY                        = IOMUX_PAD(0x0394, 0x0108, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_HSYNC__LCDIF_HSYNC                        = IOMUX_PAD(0x0398, 0x010C, 0, 0x05DC, 0, 0),
+	MX6_PAD_LCD_HSYNC__LCDIF_RS                           = IOMUX_PAD(0x0398, 0x010C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__UART4_DCE_CTS                      = IOMUX_PAD(0x0398, 0x010C, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__UART4_DTE_RTS                      = IOMUX_PAD(0x0398, 0x010C, 2, 0x0638, 2, 0),
+	MX6_PAD_LCD_HSYNC__SAI3_TX_BCLK                       = IOMUX_PAD(0x0398, 0x010C, 3, 0x0608, 0, 0),
+	MX6_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB               = IOMUX_PAD(0x0398, 0x010C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__GPIO3_IO02                         = IOMUX_PAD(0x0398, 0x010C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_HSYNC__ECSPI2_SS1                         = IOMUX_PAD(0x0398, 0x010C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_VSYNC__LCDIF_VSYNC                        = IOMUX_PAD(0x039C, 0x0110, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__LCDIF_BUSY                         = IOMUX_PAD(0x039C, 0x0110, 1, 0x05DC, 1, 0),
+	MX6_PAD_LCD_VSYNC__UART4_DCE_RTS                      = IOMUX_PAD(0x039C, 0x0110, 2, 0x0638, 3, 0),
+	MX6_PAD_LCD_VSYNC__UART4_DTE_CTS                      = IOMUX_PAD(0x039C, 0x0110, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__SAI3_RX_DATA                       = IOMUX_PAD(0x039C, 0x0110, 3, 0x0604, 0, 0),
+	MX6_PAD_LCD_VSYNC__WDOG2_WDOG_B                       = IOMUX_PAD(0x039C, 0x0110, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__GPIO3_IO03                         = IOMUX_PAD(0x039C, 0x0110, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_VSYNC__ECSPI2_SS2                         = IOMUX_PAD(0x039C, 0x0110, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_RESET__LCDIF_RESET                        = IOMUX_PAD(0x03A0, 0x0114, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__LCDIF_CS                           = IOMUX_PAD(0x03A0, 0x0114, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__CA7_MX6ULL_EVENTI                  = IOMUX_PAD(0x03A0, 0x0114, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__SAI3_TX_DATA                       = IOMUX_PAD(0x03A0, 0x0114, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__WDOG1_WDOG_ANY                     = IOMUX_PAD(0x03A0, 0x0114, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__GPIO3_IO04                         = IOMUX_PAD(0x03A0, 0x0114, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_RESET__ECSPI2_SS3                         = IOMUX_PAD(0x03A0, 0x0114, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA00__LCDIF_DATA00                      = IOMUX_PAD(0x03A4, 0x0118, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__PWM1_OUT                          = IOMUX_PAD(0x03A4, 0x0118, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN              = IOMUX_PAD(0x03A4, 0x0118, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__I2C3_SDA                          = IOMUX_PAD(0x03A4, 0x0118, IOMUX_CONFIG_SION | 4, 0x05B8, 2, 0),
+	MX6_PAD_LCD_DATA00__GPIO3_IO05                        = IOMUX_PAD(0x03A4, 0x0118, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__SRC_BT_CFG00                      = IOMUX_PAD(0x03A4, 0x0118, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA00__SAI1_MCLK                         = IOMUX_PAD(0x03A4, 0x0118, 8, 0x05E0, 1, 0),
+
+	MX6_PAD_LCD_DATA01__LCDIF_DATA01                      = IOMUX_PAD(0x03A8, 0x011C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__PWM2_OUT                          = IOMUX_PAD(0x03A8, 0x011C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT             = IOMUX_PAD(0x03A8, 0x011C, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__I2C3_SCL                          = IOMUX_PAD(0x03A8, 0x011C, IOMUX_CONFIG_SION | 4, 0x05B4, 2, 0),
+	MX6_PAD_LCD_DATA01__GPIO3_IO06                        = IOMUX_PAD(0x03A8, 0x011C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__SRC_BT_CFG01                      = IOMUX_PAD(0x03A8, 0x011C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA01__SAI1_TX_SYNC                      = IOMUX_PAD(0x03A8, 0x011C, 8, 0x05EC, 0, 0),
+
+	MX6_PAD_LCD_DATA02__LCDIF_DATA02                      = IOMUX_PAD(0x03AC, 0x0120, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__PWM3_OUT                          = IOMUX_PAD(0x03AC, 0x0120, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN              = IOMUX_PAD(0x03AC, 0x0120, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__I2C4_SDA                          = IOMUX_PAD(0x03AC, 0x0120, IOMUX_CONFIG_SION | 4, 0x05C0, 2, 0),
+	MX6_PAD_LCD_DATA02__GPIO3_IO07                        = IOMUX_PAD(0x03AC, 0x0120, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__SRC_BT_CFG02                      = IOMUX_PAD(0x03AC, 0x0120, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA02__SAI1_TX_BCLK                      = IOMUX_PAD(0x03AC, 0x0120, 8, 0x05E8, 0, 0),
+
+	MX6_PAD_LCD_DATA03__LCDIF_DATA03                      = IOMUX_PAD(0x03B0, 0x0124, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__PWM4_OUT                          = IOMUX_PAD(0x03B0, 0x0124, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT             = IOMUX_PAD(0x03B0, 0x0124, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__I2C4_SCL                          = IOMUX_PAD(0x03B0, 0x0124, IOMUX_CONFIG_SION | 4, 0x05BC, 2, 0),
+	MX6_PAD_LCD_DATA03__GPIO3_IO08                        = IOMUX_PAD(0x03B0, 0x0124, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__SRC_BT_CFG03                      = IOMUX_PAD(0x03B0, 0x0124, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA03__SAI1_RX_DATA                      = IOMUX_PAD(0x03B0, 0x0124, 8, 0x05E4, 0, 0),
+
+	MX6_PAD_LCD_DATA04__LCDIF_DATA04                      = IOMUX_PAD(0x03B4, 0x0128, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__UART8_DCE_CTS                     = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__UART8_DTE_RTS                     = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0658, 2, 0),
+	MX6_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN              = IOMUX_PAD(0x03B4, 0x0128, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__SPDIF_SR_CLK                      = IOMUX_PAD(0x03B4, 0x0128, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__GPIO3_IO09                        = IOMUX_PAD(0x03B4, 0x0128, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__SRC_BT_CFG04                      = IOMUX_PAD(0x03B4, 0x0128, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA04__SAI1_TX_DATA                      = IOMUX_PAD(0x03B4, 0x0128, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA05__LCDIF_DATA05                      = IOMUX_PAD(0x03B8, 0x012C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__UART8_DCE_RTS                     = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0658, 3, 0),
+	MX6_PAD_LCD_DATA05__UART8_DTE_CTS                     = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT             = IOMUX_PAD(0x03B8, 0x012C, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__SPDIF_OUT                         = IOMUX_PAD(0x03B8, 0x012C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__GPIO3_IO10                        = IOMUX_PAD(0x03B8, 0x012C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__SRC_BT_CFG05                      = IOMUX_PAD(0x03B8, 0x012C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA05__ECSPI1_SS1                        = IOMUX_PAD(0x03B8, 0x012C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA06__LCDIF_DATA06                      = IOMUX_PAD(0x03BC, 0x0130, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__UART7_DCE_CTS                     = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__UART7_DTE_RTS                     = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0650, 2, 0),
+	MX6_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN              = IOMUX_PAD(0x03BC, 0x0130, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__SPDIF_LOCK                        = IOMUX_PAD(0x03BC, 0x0130, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__GPIO3_IO11                        = IOMUX_PAD(0x03BC, 0x0130, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__SRC_BT_CFG06                      = IOMUX_PAD(0x03BC, 0x0130, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA06__ECSPI1_SS2                        = IOMUX_PAD(0x03BC, 0x0130, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA07__LCDIF_DATA07                      = IOMUX_PAD(0x03C0, 0x0134, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__UART7_DCE_RTS                     = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0650, 3, 0),
+	MX6_PAD_LCD_DATA07__UART7_DTE_CTS                     = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT             = IOMUX_PAD(0x03C0, 0x0134, 3, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__SPDIF_EXT_CLK                     = IOMUX_PAD(0x03C0, 0x0134, 4, 0x061C, 0, 0),
+	MX6_PAD_LCD_DATA07__GPIO3_IO12                        = IOMUX_PAD(0x03C0, 0x0134, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__SRC_BT_CFG07                      = IOMUX_PAD(0x03C0, 0x0134, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA07__ECSPI1_SS3                        = IOMUX_PAD(0x03C0, 0x0134, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA08__LCDIF_DATA08                      = IOMUX_PAD(0x03C4, 0x0138, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__SPDIF_IN                          = IOMUX_PAD(0x03C4, 0x0138, 1, 0x0618, 2, 0),
+	MX6_PAD_LCD_DATA08__CSI_DATA16                        = IOMUX_PAD(0x03C4, 0x0138, 3, 0x0504, 1, 0),
+	MX6_PAD_LCD_DATA08__EIM_DATA00                        = IOMUX_PAD(0x03C4, 0x0138, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__GPIO3_IO13                        = IOMUX_PAD(0x03C4, 0x0138, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__SRC_BT_CFG08                      = IOMUX_PAD(0x03C4, 0x0138, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA08__FLEXCAN1_TX                       = IOMUX_PAD(0x03C4, 0x0138, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA09__LCDIF_DATA09                      = IOMUX_PAD(0x03C8, 0x013C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__SAI3_MCLK                         = IOMUX_PAD(0x03C8, 0x013C, 1, 0x0600, 1, 0),
+	MX6_PAD_LCD_DATA09__CSI_DATA17                        = IOMUX_PAD(0x03C8, 0x013C, 3, 0x0508, 1, 0),
+	MX6_PAD_LCD_DATA09__EIM_DATA01                        = IOMUX_PAD(0x03C8, 0x013C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__GPIO3_IO14                        = IOMUX_PAD(0x03C8, 0x013C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__SRC_BT_CFG09                      = IOMUX_PAD(0x03C8, 0x013C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA09__FLEXCAN1_RX                       = IOMUX_PAD(0x03C8, 0x013C, 8, 0x0584, 2, 0),
+
+	MX6_PAD_LCD_DATA10__LCDIF_DATA10                      = IOMUX_PAD(0x03CC, 0x0140, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__SAI3_RX_SYNC                      = IOMUX_PAD(0x03CC, 0x0140, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__CSI_DATA18                        = IOMUX_PAD(0x03CC, 0x0140, 3, 0x050C, 1, 0),
+	MX6_PAD_LCD_DATA10__EIM_DATA02                        = IOMUX_PAD(0x03CC, 0x0140, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__GPIO3_IO15                        = IOMUX_PAD(0x03CC, 0x0140, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__SRC_BT_CFG10                      = IOMUX_PAD(0x03CC, 0x0140, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA10__FLEXCAN2_TX                       = IOMUX_PAD(0x03CC, 0x0140, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA11__LCDIF_DATA11                      = IOMUX_PAD(0x03D0, 0x0144, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__SAI3_RX_BCLK                      = IOMUX_PAD(0x03D0, 0x0144, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__CSI_DATA19                        = IOMUX_PAD(0x03D0, 0x0144, 3, 0x0510, 1, 0),
+	MX6_PAD_LCD_DATA11__EIM_DATA03                        = IOMUX_PAD(0x03D0, 0x0144, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__GPIO3_IO16                        = IOMUX_PAD(0x03D0, 0x0144, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__SRC_BT_CFG11                      = IOMUX_PAD(0x03D0, 0x0144, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA11__FLEXCAN2_RX                       = IOMUX_PAD(0x03D0, 0x0144, 8, 0x0588, 2, 0),
+
+	MX6_PAD_LCD_DATA12__LCDIF_DATA12                      = IOMUX_PAD(0x03D4, 0x0148, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__SAI3_TX_SYNC                      = IOMUX_PAD(0x03D4, 0x0148, 1, 0x060C, 1, 0),
+	MX6_PAD_LCD_DATA12__CSI_DATA20                        = IOMUX_PAD(0x03D4, 0x0148, 3, 0x0514, 1, 0),
+	MX6_PAD_LCD_DATA12__EIM_DATA04                        = IOMUX_PAD(0x03D4, 0x0148, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__GPIO3_IO17                        = IOMUX_PAD(0x03D4, 0x0148, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__SRC_BT_CFG12                      = IOMUX_PAD(0x03D4, 0x0148, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA12__ECSPI1_RDY                        = IOMUX_PAD(0x03D4, 0x0148, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA13__LCDIF_DATA13                      = IOMUX_PAD(0x03D8, 0x014C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__SAI3_TX_BCLK                      = IOMUX_PAD(0x03D8, 0x014C, 1, 0x0608, 1, 0),
+	MX6_PAD_LCD_DATA13__CSI_DATA21                        = IOMUX_PAD(0x03D8, 0x014C, 3, 0x0518, 1, 0),
+	MX6_PAD_LCD_DATA13__EIM_DATA05                        = IOMUX_PAD(0x03D8, 0x014C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__GPIO3_IO18                        = IOMUX_PAD(0x03D8, 0x014C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__SRC_BT_CFG13                      = IOMUX_PAD(0x03D8, 0x014C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA13__USDHC2_RESET_B                    = IOMUX_PAD(0x03D8, 0x014C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_LCD_DATA14__LCDIF_DATA14                      = IOMUX_PAD(0x03DC, 0x0150, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__SAI3_RX_DATA                      = IOMUX_PAD(0x03DC, 0x0150, 1, 0x0604, 1, 0),
+	MX6_PAD_LCD_DATA14__CSI_DATA22                        = IOMUX_PAD(0x03DC, 0x0150, 3, 0x051C, 1, 0),
+	MX6_PAD_LCD_DATA14__EIM_DATA06                        = IOMUX_PAD(0x03DC, 0x0150, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__GPIO3_IO19                        = IOMUX_PAD(0x03DC, 0x0150, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__SRC_BT_CFG14                      = IOMUX_PAD(0x03DC, 0x0150, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA14__USDHC2_DATA4                      = IOMUX_PAD(0x03DC, 0x0150, 8, 0x068C, 0, 0),
+
+	MX6_PAD_LCD_DATA15__LCDIF_DATA15                      = IOMUX_PAD(0x03E0, 0x0154, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__SAI3_TX_DATA                      = IOMUX_PAD(0x03E0, 0x0154, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__CSI_DATA23                        = IOMUX_PAD(0x03E0, 0x0154, 3, 0x0520, 1, 0),
+	MX6_PAD_LCD_DATA15__EIM_DATA07                        = IOMUX_PAD(0x03E0, 0x0154, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__GPIO3_IO20                        = IOMUX_PAD(0x03E0, 0x0154, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__SRC_BT_CFG15                      = IOMUX_PAD(0x03E0, 0x0154, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA15__USDHC2_DATA5                      = IOMUX_PAD(0x03E0, 0x0154, 8, 0x0690, 0, 0),
+
+	MX6_PAD_LCD_DATA16__LCDIF_DATA16                      = IOMUX_PAD(0x03E4, 0x0158, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__UART7_DCE_TX                      = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__UART7_DTE_RX                      = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0654, 2, 0),
+	MX6_PAD_LCD_DATA16__CSI_DATA01                        = IOMUX_PAD(0x03E4, 0x0158, 3, 0x04D4, 1, 0),
+	MX6_PAD_LCD_DATA16__EIM_DATA08                        = IOMUX_PAD(0x03E4, 0x0158, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__GPIO3_IO21                        = IOMUX_PAD(0x03E4, 0x0158, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__SRC_BT_CFG24                      = IOMUX_PAD(0x03E4, 0x0158, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA16__USDHC2_DATA6                      = IOMUX_PAD(0x03E4, 0x0158, 8, 0x0694, 0, 0),
+
+	MX6_PAD_LCD_DATA17__LCDIF_DATA17                      = IOMUX_PAD(0x03E8, 0x015C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__UART7_DCE_RX                      = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0654, 3, 0),
+	MX6_PAD_LCD_DATA17__UART7_DTE_TX                      = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__CSI_DATA00                        = IOMUX_PAD(0x03E8, 0x015C, 3, 0x04D0, 1, 0),
+	MX6_PAD_LCD_DATA17__EIM_DATA09                        = IOMUX_PAD(0x03E8, 0x015C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__GPIO3_IO22                        = IOMUX_PAD(0x03E8, 0x015C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__SRC_BT_CFG25                      = IOMUX_PAD(0x03E8, 0x015C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA17__USDHC2_DATA7                      = IOMUX_PAD(0x03E8, 0x015C, 8, 0x0698, 0, 0),
+
+	MX6_PAD_LCD_DATA18__LCDIF_DATA18                      = IOMUX_PAD(0x03EC, 0x0160, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__PWM5_OUT                          = IOMUX_PAD(0x03EC, 0x0160, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__CA7_MX6ULL_EVENTO                 = IOMUX_PAD(0x03EC, 0x0160, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__CSI_DATA10                        = IOMUX_PAD(0x03EC, 0x0160, 3, 0x04EC, 1, 0),
+	MX6_PAD_LCD_DATA18__EIM_DATA10                        = IOMUX_PAD(0x03EC, 0x0160, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__GPIO3_IO23                        = IOMUX_PAD(0x03EC, 0x0160, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__SRC_BT_CFG26                      = IOMUX_PAD(0x03EC, 0x0160, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA18__USDHC2_CMD                        = IOMUX_PAD(0x03EC, 0x0160, 8, 0x0678, 1, 0),
+	MX6_PAD_LCD_DATA19__EIM_DATA11                        = IOMUX_PAD(0x03F0, 0x0164, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__GPIO3_IO24                        = IOMUX_PAD(0x03F0, 0x0164, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__SRC_BT_CFG27                      = IOMUX_PAD(0x03F0, 0x0164, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__USDHC2_CLK                        = IOMUX_PAD(0x03F0, 0x0164, 8, 0x0670, 1, 0),
+
+	MX6_PAD_LCD_DATA19__LCDIF_DATA19                      = IOMUX_PAD(0x03F0, 0x0164, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__PWM6_OUT                          = IOMUX_PAD(0x03F0, 0x0164, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__WDOG1_WDOG_ANY                    = IOMUX_PAD(0x03F0, 0x0164, 2, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA19__CSI_DATA11                        = IOMUX_PAD(0x03F0, 0x0164, 3, 0x04F0, 1, 0),
+	MX6_PAD_LCD_DATA20__EIM_DATA12                        = IOMUX_PAD(0x03F4, 0x0168, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__GPIO3_IO25                        = IOMUX_PAD(0x03F4, 0x0168, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__SRC_BT_CFG28                      = IOMUX_PAD(0x03F4, 0x0168, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__USDHC2_DATA0                      = IOMUX_PAD(0x03F4, 0x0168, 8, 0x067C, 1, 0),
+
+	MX6_PAD_LCD_DATA20__LCDIF_DATA20                      = IOMUX_PAD(0x03F4, 0x0168, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__UART8_DCE_TX                      = IOMUX_PAD(0x03F4, 0x0168, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA20__UART8_DTE_RX                      = IOMUX_PAD(0x03F4, 0x0168, 1, 0x065C, 2, 0),
+	MX6_PAD_LCD_DATA20__ECSPI1_SCLK                       = IOMUX_PAD(0x03F4, 0x0168, 2, 0x0534, 0, 0),
+	MX6_PAD_LCD_DATA20__CSI_DATA12                        = IOMUX_PAD(0x03F4, 0x0168, 3, 0x04F4, 1, 0),
+
+	MX6_PAD_LCD_DATA21__LCDIF_DATA21                      = IOMUX_PAD(0x03F8, 0x016C, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__UART8_DCE_RX                      = IOMUX_PAD(0x03F8, 0x016C, 1, 0x065C, 3, 0),
+	MX6_PAD_LCD_DATA21__UART8_DTE_TX                      = IOMUX_PAD(0x03F8, 0x016C, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__ECSPI1_SS0                        = IOMUX_PAD(0x03F8, 0x016C, 2, 0x0540, 0, 0),
+	MX6_PAD_LCD_DATA21__CSI_DATA13                        = IOMUX_PAD(0x03F8, 0x016C, 3, 0x04F8, 1, 0),
+	MX6_PAD_LCD_DATA21__EIM_DATA13                        = IOMUX_PAD(0x03F8, 0x016C, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__GPIO3_IO26                        = IOMUX_PAD(0x03F8, 0x016C, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__SRC_BT_CFG29                      = IOMUX_PAD(0x03F8, 0x016C, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA21__USDHC2_DATA1                      = IOMUX_PAD(0x03F8, 0x016C, 8, 0x0680, 1, 0),
+
+	MX6_PAD_LCD_DATA22__LCDIF_DATA22                      = IOMUX_PAD(0x03FC, 0x0170, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__MQS_RIGHT                         = IOMUX_PAD(0x03FC, 0x0170, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__ECSPI1_MOSI                       = IOMUX_PAD(0x03FC, 0x0170, 2, 0x053C, 0, 0),
+	MX6_PAD_LCD_DATA22__CSI_DATA14                        = IOMUX_PAD(0x03FC, 0x0170, 3, 0x04FC, 1, 0),
+	MX6_PAD_LCD_DATA22__EIM_DATA14                        = IOMUX_PAD(0x03FC, 0x0170, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__GPIO3_IO27                        = IOMUX_PAD(0x03FC, 0x0170, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__SRC_BT_CFG30                      = IOMUX_PAD(0x03FC, 0x0170, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA22__USDHC2_DATA2                      = IOMUX_PAD(0x03FC, 0x0170, 8, 0x0684, 0, 0),
+
+	MX6_PAD_LCD_DATA23__LCDIF_DATA23                      = IOMUX_PAD(0x0400, 0x0174, 0, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__MQS_LEFT                          = IOMUX_PAD(0x0400, 0x0174, 1, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__ECSPI1_MISO                       = IOMUX_PAD(0x0400, 0x0174, 2, 0x0538, 0, 0),
+	MX6_PAD_LCD_DATA23__CSI_DATA15                        = IOMUX_PAD(0x0400, 0x0174, 3, 0x0500, 1, 0),
+	MX6_PAD_LCD_DATA23__EIM_DATA15                        = IOMUX_PAD(0x0400, 0x0174, 4, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__GPIO3_IO28                        = IOMUX_PAD(0x0400, 0x0174, 5, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__SRC_BT_CFG31                      = IOMUX_PAD(0x0400, 0x0174, 6, 0x0000, 0, 0),
+	MX6_PAD_LCD_DATA23__USDHC2_DATA3                      = IOMUX_PAD(0x0400, 0x0174, 8, 0x0688, 1, 0),
+
+	MX6_PAD_NAND_RE_B__RAWNAND_RE_B                       = IOMUX_PAD(0x0404, 0x0178, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_RE_B__USDHC2_CLK                         = IOMUX_PAD(0x0404, 0x0178, 1, 0x0670, 2, 0),
+	MX6_PAD_NAND_RE_B__QSPI_B_SCLK                        = IOMUX_PAD(0x0404, 0x0178, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_RE_B__KPP_ROW00                          = IOMUX_PAD(0x0404, 0x0178, 3, 0x05D0, 1, 0),
+	MX6_PAD_NAND_RE_B__EIM_EB_B00                         = IOMUX_PAD(0x0404, 0x0178, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_RE_B__GPIO4_IO00                         = IOMUX_PAD(0x0404, 0x0178, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_RE_B__ECSPI3_SS2                         = IOMUX_PAD(0x0404, 0x0178, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_WE_B__RAWNAND_WE_B                       = IOMUX_PAD(0x0408, 0x017C, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_WE_B__USDHC2_CMD                         = IOMUX_PAD(0x0408, 0x017C, 1, 0x0678, 2, 0),
+	MX6_PAD_NAND_WE_B__QSPI_B_SS0_B                       = IOMUX_PAD(0x0408, 0x017C, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_WE_B__KPP_COL00                          = IOMUX_PAD(0x0408, 0x017C, 3, 0x05C4, 1, 0),
+	MX6_PAD_NAND_WE_B__EIM_EB_B01                         = IOMUX_PAD(0x0408, 0x017C, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_WE_B__GPIO4_IO01                         = IOMUX_PAD(0x0408, 0x017C, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_WE_B__ECSPI3_SS3                         = IOMUX_PAD(0x0408, 0x017C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA00__RAWNAND_DATA00                   = IOMUX_PAD(0x040C, 0x0180, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA00__USDHC2_DATA0                     = IOMUX_PAD(0x040C, 0x0180, 1, 0x067C, 2, 0),
+	MX6_PAD_NAND_DATA00__QSPI_B_SS1_B                     = IOMUX_PAD(0x040C, 0x0180, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA00__KPP_ROW01                        = IOMUX_PAD(0x040C, 0x0180, 3, 0x05D4, 1, 0),
+	MX6_PAD_NAND_DATA00__EIM_AD08                         = IOMUX_PAD(0x040C, 0x0180, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA00__GPIO4_IO02                       = IOMUX_PAD(0x040C, 0x0180, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA00__ECSPI4_RDY                       = IOMUX_PAD(0x040C, 0x0180, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA01__RAWNAND_DATA01                   = IOMUX_PAD(0x0410, 0x0184, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA01__USDHC2_DATA1                     = IOMUX_PAD(0x0410, 0x0184, 1, 0x0680, 2, 0),
+	MX6_PAD_NAND_DATA01__QSPI_B_DQS                       = IOMUX_PAD(0x0410, 0x0184, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA01__KPP_COL01                        = IOMUX_PAD(0x0410, 0x0184, 3, 0x05C8, 1, 0),
+	MX6_PAD_NAND_DATA01__EIM_AD09                         = IOMUX_PAD(0x0410, 0x0184, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA01__GPIO4_IO03                       = IOMUX_PAD(0x0410, 0x0184, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA01__ECSPI4_SS1                       = IOMUX_PAD(0x0410, 0x0184, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA02__RAWNAND_DATA02                   = IOMUX_PAD(0x0414, 0x0188, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA02__USDHC2_DATA2                     = IOMUX_PAD(0x0414, 0x0188, 1, 0x0684, 1, 0),
+	MX6_PAD_NAND_DATA02__QSPI_B_DATA00                    = IOMUX_PAD(0x0414, 0x0188, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA02__KPP_ROW02                        = IOMUX_PAD(0x0414, 0x0188, 3, 0x05D8, 1, 0),
+	MX6_PAD_NAND_DATA02__EIM_AD10                         = IOMUX_PAD(0x0414, 0x0188, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA02__GPIO4_IO04                       = IOMUX_PAD(0x0414, 0x0188, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA02__ECSPI4_SS2                       = IOMUX_PAD(0x0414, 0x0188, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA03__RAWNAND_DATA03                   = IOMUX_PAD(0x0418, 0x018C, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA03__USDHC2_DATA3                     = IOMUX_PAD(0x0418, 0x018C, 1, 0x0688, 2, 0),
+	MX6_PAD_NAND_DATA03__QSPI_B_DATA01                    = IOMUX_PAD(0x0418, 0x018C, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA03__KPP_COL02                        = IOMUX_PAD(0x0418, 0x018C, 3, 0x05CC, 1, 0),
+	MX6_PAD_NAND_DATA03__EIM_AD11                         = IOMUX_PAD(0x0418, 0x018C, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA03__GPIO4_IO05                       = IOMUX_PAD(0x0418, 0x018C, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA03__ECSPI4_SS3                       = IOMUX_PAD(0x0418, 0x018C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA04__RAWNAND_DATA04                   = IOMUX_PAD(0x041C, 0x0190, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__USDHC2_DATA4                     = IOMUX_PAD(0x041C, 0x0190, 1, 0x068C, 1, 0),
+	MX6_PAD_NAND_DATA04__QSPI_B_DATA02                    = IOMUX_PAD(0x041C, 0x0190, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__ECSPI4_SCLK                      = IOMUX_PAD(0x041C, 0x0190, 3, 0x0564, 1, 0),
+	MX6_PAD_NAND_DATA04__EIM_AD12                         = IOMUX_PAD(0x041C, 0x0190, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__GPIO4_IO06                       = IOMUX_PAD(0x041C, 0x0190, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__UART2_DCE_TX                     = IOMUX_PAD(0x041C, 0x0190, 8, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA04__UART2_DTE_RX                     = IOMUX_PAD(0x041C, 0x0190, 8, 0x062C, 2, 0),
+
+	MX6_PAD_NAND_DATA05__RAWNAND_DATA05                   = IOMUX_PAD(0x0420, 0x0194, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA05__USDHC2_DATA5                     = IOMUX_PAD(0x0420, 0x0194, 1, 0x0690, 1, 0),
+	MX6_PAD_NAND_DATA05__QSPI_B_DATA03                    = IOMUX_PAD(0x0420, 0x0194, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA05__ECSPI4_MOSI                      = IOMUX_PAD(0x0420, 0x0194, 3, 0x056C, 1, 0),
+	MX6_PAD_NAND_DATA05__EIM_AD13                         = IOMUX_PAD(0x0420, 0x0194, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA05__GPIO4_IO07                       = IOMUX_PAD(0x0420, 0x0194, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA05__UART2_DCE_RX                     = IOMUX_PAD(0x0420, 0x0194, 8, 0x062C, 3, 0),
+	MX6_PAD_NAND_DATA05__UART2_DTE_TX                     = IOMUX_PAD(0x0420, 0x0194, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DATA06__RAWNAND_DATA06                   = IOMUX_PAD(0x0424, 0x0198, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__USDHC2_DATA6                     = IOMUX_PAD(0x0424, 0x0198, 1, 0x0694, 1, 0),
+	MX6_PAD_NAND_DATA06__SAI2_RX_BCLK                     = IOMUX_PAD(0x0424, 0x0198, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__ECSPI4_MISO                      = IOMUX_PAD(0x0424, 0x0198, 3, 0x0568, 1, 0),
+	MX6_PAD_NAND_DATA06__EIM_AD14                         = IOMUX_PAD(0x0424, 0x0198, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__GPIO4_IO08                       = IOMUX_PAD(0x0424, 0x0198, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__UART2_DCE_CTS                    = IOMUX_PAD(0x0424, 0x0198, 8, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA06__UART2_DTE_RTS                    = IOMUX_PAD(0x0424, 0x0198, 8, 0x0628, 4, 0),
+
+	MX6_PAD_NAND_DATA07__RAWNAND_DATA07                   = IOMUX_PAD(0x0428, 0x019C, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA07__USDHC2_DATA7                     = IOMUX_PAD(0x0428, 0x019C, 1, 0x0698, 1, 0),
+	MX6_PAD_NAND_DATA07__QSPI_A_SS1_B                     = IOMUX_PAD(0x0428, 0x019C, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA07__ECSPI4_SS0                       = IOMUX_PAD(0x0428, 0x019C, 3, 0x0570, 1, 0),
+	MX6_PAD_NAND_DATA07__EIM_AD15                         = IOMUX_PAD(0x0428, 0x019C, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA07__GPIO4_IO09                       = IOMUX_PAD(0x0428, 0x019C, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DATA07__UART2_DCE_RTS                    = IOMUX_PAD(0x0428, 0x019C, 8, 0x0628, 5, 0),
+	MX6_PAD_NAND_DATA07__UART2_DTE_CTS                    = IOMUX_PAD(0x0428, 0x019C, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_ALE__RAWNAND_ALE                         = IOMUX_PAD(0x042C, 0x01A0, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__USDHC2_RESET_B                      = IOMUX_PAD(0x042C, 0x01A0, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__QSPI_A_DQS                          = IOMUX_PAD(0x042C, 0x01A0, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__PWM3_OUT                            = IOMUX_PAD(0x042C, 0x01A0, 3, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__EIM_ADDR17                          = IOMUX_PAD(0x042C, 0x01A0, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__GPIO4_IO10                          = IOMUX_PAD(0x042C, 0x01A0, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_ALE__ECSPI3_SS1                          = IOMUX_PAD(0x042C, 0x01A0, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_WP_B__RAWNAND_WP_B                       = IOMUX_PAD(0x0430, 0x01A4, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__USDHC1_RESET_B                     = IOMUX_PAD(0x0430, 0x01A4, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__QSPI_A_SCLK                        = IOMUX_PAD(0x0430, 0x01A4, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__PWM4_OUT                           = IOMUX_PAD(0x0430, 0x01A4, 3, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__EIM_BCLK                           = IOMUX_PAD(0x0430, 0x01A4, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__GPIO4_IO11                         = IOMUX_PAD(0x0430, 0x01A4, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_WP_B__ECSPI3_RDY                         = IOMUX_PAD(0x0430, 0x01A4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_READY_B__RAWNAND_READY_B                 = IOMUX_PAD(0x0434, 0x01A8, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__USDHC1_DATA4                    = IOMUX_PAD(0x0434, 0x01A8, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__QSPI_A_DATA00                   = IOMUX_PAD(0x0434, 0x01A8, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__ECSPI3_SS0                      = IOMUX_PAD(0x0434, 0x01A8, 3, 0x0560, 1, 0),
+	MX6_PAD_NAND_READY_B__EIM_CS1_B                       = IOMUX_PAD(0x0434, 0x01A8, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__GPIO4_IO12                      = IOMUX_PAD(0x0434, 0x01A8, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__UART3_DCE_TX                    = IOMUX_PAD(0x0434, 0x01A8, 8, 0x0000, 0, 0),
+	MX6_PAD_NAND_READY_B__UART3_DTE_RX                    = IOMUX_PAD(0x0434, 0x01A8, 8, 0x0634, 2, 0),
+
+	MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B                     = IOMUX_PAD(0x0438, 0x01AC, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__USDHC1_DATA5                      = IOMUX_PAD(0x0438, 0x01AC, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__QSPI_A_DATA01                     = IOMUX_PAD(0x0438, 0x01AC, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__ECSPI3_SCLK                       = IOMUX_PAD(0x0438, 0x01AC, 3, 0x0554, 1, 0),
+	MX6_PAD_NAND_CE0_B__EIM_DTACK_B                       = IOMUX_PAD(0x0438, 0x01AC, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__GPIO4_IO13                        = IOMUX_PAD(0x0438, 0x01AC, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE0_B__UART3_DCE_RX                      = IOMUX_PAD(0x0438, 0x01AC, 8, 0x0634, 3, 0),
+	MX6_PAD_NAND_CE0_B__UART3_DTE_TX                      = IOMUX_PAD(0x0438, 0x01AC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_CE1_B__RAWNAND_CE1_B                     = IOMUX_PAD(0x043C, 0x01B0, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__USDHC1_DATA6                      = IOMUX_PAD(0x043C, 0x01B0, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__QSPI_A_DATA02                     = IOMUX_PAD(0x043C, 0x01B0, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__ECSPI3_MOSI                       = IOMUX_PAD(0x043C, 0x01B0, 3, 0x055C, 1, 0),
+	MX6_PAD_NAND_CE1_B__EIM_ADDR18                        = IOMUX_PAD(0x043C, 0x01B0, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__GPIO4_IO14                        = IOMUX_PAD(0x043C, 0x01B0, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__UART3_DCE_CTS                     = IOMUX_PAD(0x043C, 0x01B0, 8, 0x0000, 0, 0),
+	MX6_PAD_NAND_CE1_B__UART3_DTE_RTS                     = IOMUX_PAD(0x043C, 0x01B0, 8, 0x0630, 2, 0),
+
+	MX6_PAD_NAND_CLE__RAWNAND_CLE                         = IOMUX_PAD(0x0440, 0x01B4, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__USDHC1_DATA7                        = IOMUX_PAD(0x0440, 0x01B4, 1, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__QSPI_A_DATA03                       = IOMUX_PAD(0x0440, 0x01B4, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__ECSPI3_MISO                         = IOMUX_PAD(0x0440, 0x01B4, 3, 0x0558, 1, 0),
+	MX6_PAD_NAND_CLE__EIM_ADDR16                          = IOMUX_PAD(0x0440, 0x01B4, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__GPIO4_IO15                          = IOMUX_PAD(0x0440, 0x01B4, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_CLE__UART3_DCE_RTS                       = IOMUX_PAD(0x0440, 0x01B4, 8, 0x0630, 3, 0),
+	MX6_PAD_NAND_CLE__UART3_DTE_CTS                       = IOMUX_PAD(0x0440, 0x01B4, 8, 0x0000, 0, 0),
+
+	MX6_PAD_NAND_DQS__RAWNAND_DQS                         = IOMUX_PAD(0x0444, 0x01B8, 0, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__CSI_FIELD                           = IOMUX_PAD(0x0444, 0x01B8, 1, 0x0530, 1, 0),
+	MX6_PAD_NAND_DQS__QSPI_A_SS0_B                        = IOMUX_PAD(0x0444, 0x01B8, 2, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__PWM5_OUT                            = IOMUX_PAD(0x0444, 0x01B8, 3, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__EIM_WAIT                            = IOMUX_PAD(0x0444, 0x01B8, 4, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__GPIO4_IO16                          = IOMUX_PAD(0x0444, 0x01B8, 5, 0x0000, 0, 0),
+	MX6_PAD_NAND_DQS__SDMA_EXT_EVENT01                    = IOMUX_PAD(0x0444, 0x01B8, 6, 0x0614, 1, 0),
+	MX6_PAD_NAND_DQS__SPDIF_EXT_CLK                       = IOMUX_PAD(0x0444, 0x01B8, 8, 0x061C, 1, 0),
+
+	MX6_PAD_SD1_CMD__USDHC1_CMD                           = IOMUX_PAD(0x0448, 0x01BC, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__GPT2_COMPARE1                        = IOMUX_PAD(0x0448, 0x01BC, 1, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__SAI2_RX_SYNC                         = IOMUX_PAD(0x0448, 0x01BC, 2, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__SPDIF_OUT                            = IOMUX_PAD(0x0448, 0x01BC, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__EIM_ADDR19                           = IOMUX_PAD(0x0448, 0x01BC, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__GPIO2_IO16                           = IOMUX_PAD(0x0448, 0x01BC, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_CMD__SDMA_EXT_EVENT00                     = IOMUX_PAD(0x0448, 0x01BC, 6, 0x0610, 2, 0),
+	MX6_PAD_SD1_CMD__USB_OTG1_PWR                         = IOMUX_PAD(0x0448, 0x01BC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_CLK__USDHC1_CLK                           = IOMUX_PAD(0x044C, 0x01C0, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__GPT2_COMPARE2                        = IOMUX_PAD(0x044C, 0x01C0, 1, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__SAI2_MCLK                            = IOMUX_PAD(0x044C, 0x01C0, 2, 0x05F0, 1, 0),
+	MX6_PAD_SD1_CLK__SPDIF_IN                             = IOMUX_PAD(0x044C, 0x01C0, 3, 0x0618, 3, 0),
+	MX6_PAD_SD1_CLK__EIM_ADDR20                           = IOMUX_PAD(0x044C, 0x01C0, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__GPIO2_IO17                           = IOMUX_PAD(0x044C, 0x01C0, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_CLK__USB_OTG1_OC                          = IOMUX_PAD(0x044C, 0x01C0, 8, 0x0664, 2, 0),
+
+	MX6_PAD_SD1_DATA0__USDHC1_DATA0                       = IOMUX_PAD(0x0450, 0x01C4, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__GPT2_COMPARE3                      = IOMUX_PAD(0x0450, 0x01C4, 1, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__SAI2_TX_SYNC                       = IOMUX_PAD(0x0450, 0x01C4, 2, 0x05FC, 1, 0),
+	MX6_PAD_SD1_DATA0__FLEXCAN1_TX                        = IOMUX_PAD(0x0450, 0x01C4, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__EIM_ADDR21                         = IOMUX_PAD(0x0450, 0x01C4, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__GPIO2_IO18                         = IOMUX_PAD(0x0450, 0x01C4, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA0__ANATOP_OTG1_ID                     = IOMUX_PAD(0x0450, 0x01C4, 8, 0x04B8, 2, 0),
+
+	MX6_PAD_SD1_DATA1__USDHC1_DATA1                       = IOMUX_PAD(0x0454, 0x01C8, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA1__GPT2_CLK                           = IOMUX_PAD(0x0454, 0x01C8, 1, 0x05A0, 1, 0),
+	MX6_PAD_SD1_DATA1__SAI2_TX_BCLK                       = IOMUX_PAD(0x0454, 0x01C8, 2, 0x05F8, 1, 0),
+	MX6_PAD_SD1_DATA1__FLEXCAN1_RX                        = IOMUX_PAD(0x0454, 0x01C8, 3, 0x0584, 3, 0),
+	MX6_PAD_SD1_DATA1__EIM_ADDR22                         = IOMUX_PAD(0x0454, 0x01C8, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA1__GPIO2_IO19                         = IOMUX_PAD(0x0454, 0x01C8, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA1__USB_OTG2_PWR                       = IOMUX_PAD(0x0454, 0x01C8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_SD1_DATA2__USDHC1_DATA2                       = IOMUX_PAD(0x0458, 0x01CC, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__GPT2_CAPTURE1                      = IOMUX_PAD(0x0458, 0x01CC, 1, 0x0598, 1, 0),
+	MX6_PAD_SD1_DATA2__SAI2_RX_DATA                       = IOMUX_PAD(0x0458, 0x01CC, 2, 0x05F4, 1, 0),
+	MX6_PAD_SD1_DATA2__FLEXCAN2_TX                        = IOMUX_PAD(0x0458, 0x01CC, 3, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__EIM_ADDR23                         = IOMUX_PAD(0x0458, 0x01CC, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__GPIO2_IO20                         = IOMUX_PAD(0x0458, 0x01CC, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__CCM_CLKO1                          = IOMUX_PAD(0x0458, 0x01CC, 6, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA2__USB_OTG2_OC                        = IOMUX_PAD(0x0458, 0x01CC, 8, 0x0660, 2, 0),
+
+	MX6_PAD_SD1_DATA3__USDHC1_DATA3                       = IOMUX_PAD(0x045C, 0x01D0, 0, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__GPT2_CAPTURE2                      = IOMUX_PAD(0x045C, 0x01D0, 1, 0x059C, 1, 0),
+	MX6_PAD_SD1_DATA3__SAI2_TX_DATA                       = IOMUX_PAD(0x045C, 0x01D0, 2, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__FLEXCAN2_RX                        = IOMUX_PAD(0x045C, 0x01D0, 3, 0x0588, 3, 0),
+	MX6_PAD_SD1_DATA3__EIM_ADDR24                         = IOMUX_PAD(0x045C, 0x01D0, 4, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__GPIO2_IO21                         = IOMUX_PAD(0x045C, 0x01D0, 5, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__CCM_CLKO2                          = IOMUX_PAD(0x045C, 0x01D0, 6, 0x0000, 0, 0),
+	MX6_PAD_SD1_DATA3__ANATOP_OTG2_ID                     = IOMUX_PAD(0x045C, 0x01D0, 8, 0x04BC, 2, 0),
+
+	MX6_PAD_CSI_MCLK__CSI_MCLK                            = IOMUX_PAD(0x0460, 0x01D4, 0, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__USDHC2_CD_B                         = IOMUX_PAD(0x0460, 0x01D4, 1, 0x0674, 0, 0),
+	MX6_PAD_CSI_MCLK__RAWNAND_CE2_B                       = IOMUX_PAD(0x0460, 0x01D4, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__I2C1_SDA                            = IOMUX_PAD(0x0460, 0x01D4, IOMUX_CONFIG_SION | 3, 0x05A8, 0, 0),
+	MX6_PAD_CSI_MCLK__EIM_CS0_B                           = IOMUX_PAD(0x0460, 0x01D4, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__GPIO4_IO17                          = IOMUX_PAD(0x0460, 0x01D4, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL                   = IOMUX_PAD(0x0460, 0x01D4, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__UART6_DCE_TX                        = IOMUX_PAD(0x0460, 0x01D4, 8, 0x0000, 0, 0),
+	MX6_PAD_CSI_MCLK__UART6_DTE_RX                        = IOMUX_PAD(0x0460, 0x01D4, 8, 0x064C, 0, 0),
+
+	MX6_PAD_CSI_PIXCLK__CSI_PIXCLK                        = IOMUX_PAD(0x0464, 0x01D8, 0, 0x0528, 1, 0),
+	MX6_PAD_CSI_PIXCLK__USDHC2_WP                         = IOMUX_PAD(0x0464, 0x01D8, 1, 0x069C, 2, 0),
+	MX6_PAD_CSI_PIXCLK__RAWNAND_CE3_B                     = IOMUX_PAD(0x0464, 0x01D8, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_PIXCLK__I2C1_SCL                          = IOMUX_PAD(0x0464, 0x01D8, IOMUX_CONFIG_SION | 3, 0x05A4, 2, 0),
+	MX6_PAD_CSI_PIXCLK__EIM_OE                            = IOMUX_PAD(0x0464, 0x01D8, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_PIXCLK__GPIO4_IO18                        = IOMUX_PAD(0x0464, 0x01D8, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_PIXCLK__SNVS_HP_VIO_5                     = IOMUX_PAD(0x0464, 0x01D8, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_PIXCLK__UART6_DCE_RX                      = IOMUX_PAD(0x0464, 0x01D8, 8, 0x064C, 3, 0),
+	MX6_PAD_CSI_PIXCLK__UART6_DTE_TX                      = IOMUX_PAD(0x0464, 0x01D8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_VSYNC__CSI_VSYNC                          = IOMUX_PAD(0x0468, 0x01DC, 0, 0x052C, 0, 0),
+	MX6_PAD_CSI_VSYNC__USDHC2_CLK                         = IOMUX_PAD(0x0468, 0x01DC, 1, 0x0670, 0, 0),
+	MX6_PAD_CSI_VSYNC__SIM1_PORT1_CLK                     = IOMUX_PAD(0x0468, 0x01DC, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_VSYNC__I2C2_SDA                           = IOMUX_PAD(0x0468, 0x01DC, IOMUX_CONFIG_SION | 3, 0x05B0, 0, 0),
+	MX6_PAD_CSI_VSYNC__EIM_RW                             = IOMUX_PAD(0x0468, 0x01DC, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_VSYNC__GPIO4_IO19                         = IOMUX_PAD(0x0468, 0x01DC, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_VSYNC__PWM7_OUT                           = IOMUX_PAD(0x0468, 0x01DC, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_VSYNC__UART6_DCE_RTS                      = IOMUX_PAD(0x0468, 0x01DC, 8, 0x0648, 0, 0),
+	MX6_PAD_CSI_VSYNC__UART6_DTE_CTS                      = IOMUX_PAD(0x0468, 0x01DC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_HSYNC__CSI_HSYNC                          = IOMUX_PAD(0x046C, 0x01E0, 0, 0x0524, 0, 0),
+	MX6_PAD_CSI_HSYNC__USDHC2_CMD                         = IOMUX_PAD(0x046C, 0x01E0, 1, 0x0678, 0, 0),
+	MX6_PAD_CSI_HSYNC__SIM1_PORT1_PD                      = IOMUX_PAD(0x046C, 0x01E0, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__I2C2_SCL                           = IOMUX_PAD(0x046C, 0x01E0, IOMUX_CONFIG_SION | 3, 0x05AC, 0, 0),
+	MX6_PAD_CSI_HSYNC__EIM_LBA_B                          = IOMUX_PAD(0x046C, 0x01E0, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__GPIO4_IO20                         = IOMUX_PAD(0x046C, 0x01E0, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__PWM8_OUT                           = IOMUX_PAD(0x046C, 0x01E0, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__UART6_DCE_CTS                      = IOMUX_PAD(0x046C, 0x01E0, 8, 0x0000, 0, 0),
+	MX6_PAD_CSI_HSYNC__UART6_DTE_RTS                      = IOMUX_PAD(0x046C, 0x01E0, 8, 0x0648, 1, 0),
+
+	MX6_PAD_CSI_DATA00__CSI_DATA02                        = IOMUX_PAD(0x0470, 0x01E4, 0, 0x04C4, 0, 0),
+	MX6_PAD_CSI_DATA00__USDHC2_DATA0                      = IOMUX_PAD(0x0470, 0x01E4, 1, 0x067C, 0, 0),
+	MX6_PAD_CSI_DATA00__SIM1_PORT1_RST_B                  = IOMUX_PAD(0x0470, 0x01E4, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__ECSPI2_SCLK                       = IOMUX_PAD(0x0470, 0x01E4, 3, 0x0544, 0, 0),
+	MX6_PAD_CSI_DATA00__EIM_AD00                          = IOMUX_PAD(0x0470, 0x01E4, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__GPIO4_IO21                        = IOMUX_PAD(0x0470, 0x01E4, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__SRC_INT_BOOT                      = IOMUX_PAD(0x0470, 0x01E4, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__UART5_DCE_TX                      = IOMUX_PAD(0x0470, 0x01E4, 8, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA00__UART5_DTE_RX                      = IOMUX_PAD(0x0470, 0x01E4, 8, 0x0644, 0, 0),
+
+	MX6_PAD_CSI_DATA01__CSI_DATA03                        = IOMUX_PAD(0x0474, 0x01E8, 0, 0x04C8, 0, 0),
+	MX6_PAD_CSI_DATA01__USDHC2_DATA1                      = IOMUX_PAD(0x0474, 0x01E8, 1, 0x0680, 0, 0),
+	MX6_PAD_CSI_DATA01__SIM1_PORT1_SVEN                   = IOMUX_PAD(0x0474, 0x01E8, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA01__ECSPI2_SS0                        = IOMUX_PAD(0x0474, 0x01E8, 3, 0x0550, 0, 0),
+	MX6_PAD_CSI_DATA01__EIM_AD01                          = IOMUX_PAD(0x0474, 0x01E8, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA01__GPIO4_IO22                        = IOMUX_PAD(0x0474, 0x01E8, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA01__SAI1_MCLK                         = IOMUX_PAD(0x0474, 0x01E8, 6, 0x05E0, 0, 0),
+	MX6_PAD_CSI_DATA01__UART5_DCE_RX                      = IOMUX_PAD(0x0474, 0x01E8, 8, 0x0644, 1, 0),
+	MX6_PAD_CSI_DATA01__UART5_DTE_TX                      = IOMUX_PAD(0x0474, 0x01E8, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_DATA02__CSI_DATA04                        = IOMUX_PAD(0x0478, 0x01EC, 0, 0x04D8, 1, 0),
+	MX6_PAD_CSI_DATA02__USDHC2_DATA2                      = IOMUX_PAD(0x0478, 0x01EC, 1, 0x0684, 2, 0),
+	MX6_PAD_CSI_DATA02__SIM1_PORT1_TRXD                   = IOMUX_PAD(0x0478, 0x01EC, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA02__ECSPI2_MOSI                       = IOMUX_PAD(0x0478, 0x01EC, 3, 0x054C, 1, 0),
+	MX6_PAD_CSI_DATA02__EIM_AD02                          = IOMUX_PAD(0x0478, 0x01EC, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA02__GPIO4_IO23                        = IOMUX_PAD(0x0478, 0x01EC, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA02__SAI1_RX_SYNC                      = IOMUX_PAD(0x0478, 0x01EC, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA02__UART5_DCE_RTS                     = IOMUX_PAD(0x0478, 0x01EC, 8, 0x0640, 7, 0),
+	MX6_PAD_CSI_DATA02__UART5_DTE_CTS                     = IOMUX_PAD(0x0478, 0x01EC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_DATA03__CSI_DATA05                        = IOMUX_PAD(0x047C, 0x01F0, 0, 0x04CC, 0, 0),
+	MX6_PAD_CSI_DATA03__USDHC2_DATA3                      = IOMUX_PAD(0x047C, 0x01F0, 1, 0x0688, 0, 0),
+	MX6_PAD_CSI_DATA03__SIM2_PORT1_PD                     = IOMUX_PAD(0x047C, 0x01F0, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__ECSPI2_MISO                       = IOMUX_PAD(0x047C, 0x01F0, 3, 0x0548, 0, 0),
+	MX6_PAD_CSI_DATA03__EIM_AD03                          = IOMUX_PAD(0x047C, 0x01F0, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__GPIO4_IO24                        = IOMUX_PAD(0x047C, 0x01F0, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__SAI1_RX_BCLK                      = IOMUX_PAD(0x047C, 0x01F0, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__UART5_DCE_CTS                     = IOMUX_PAD(0x047C, 0x01F0, 8, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA03__UART5_DTE_RTS                     = IOMUX_PAD(0x047C, 0x01F0, 8, 0x0640, 0, 0),
+
+	MX6_PAD_CSI_DATA04__CSI_DATA06                        = IOMUX_PAD(0x0480, 0x01F4, 0, 0x04DC, 1, 0),
+	MX6_PAD_CSI_DATA04__USDHC2_DATA4                      = IOMUX_PAD(0x0480, 0x01F4, 1, 0x068C, 2, 0),
+	MX6_PAD_CSI_DATA04__SIM2_PORT1_CLK                    = IOMUX_PAD(0x0480, 0x01F4, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA04__ECSPI1_SCLK                       = IOMUX_PAD(0x0480, 0x01F4, 3, 0x0534, 1, 0),
+	MX6_PAD_CSI_DATA04__EIM_AD04                          = IOMUX_PAD(0x0480, 0x01F4, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA04__GPIO4_IO25                        = IOMUX_PAD(0x0480, 0x01F4, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA04__SAI1_TX_SYNC                      = IOMUX_PAD(0x0480, 0x01F4, 6, 0x05EC, 1, 0),
+	MX6_PAD_CSI_DATA04__USDHC1_WP                         = IOMUX_PAD(0x0480, 0x01F4, 8, 0x066C, 2, 0),
+
+	MX6_PAD_CSI_DATA05__CSI_DATA07                        = IOMUX_PAD(0x0484, 0x01F8, 0, 0x04E0, 1, 0),
+	MX6_PAD_CSI_DATA05__USDHC2_DATA5                      = IOMUX_PAD(0x0484, 0x01F8, 1, 0x0690, 2, 0),
+	MX6_PAD_CSI_DATA05__SIM2_PORT1_RST_B                  = IOMUX_PAD(0x0484, 0x01F8, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA05__ECSPI1_SS0                        = IOMUX_PAD(0x0484, 0x01F8, 3, 0x0540, 1, 0),
+	MX6_PAD_CSI_DATA05__EIM_AD05                          = IOMUX_PAD(0x0484, 0x01F8, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA05__GPIO4_IO26                        = IOMUX_PAD(0x0484, 0x01F8, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA05__SAI1_TX_BCLK                      = IOMUX_PAD(0x0484, 0x01F8, 6, 0x05E8, 1, 0),
+	MX6_PAD_CSI_DATA05__USDHC1_CD_B                       = IOMUX_PAD(0x0484, 0x01F8, 8, 0x0668, 2, 0),
+
+	MX6_PAD_CSI_DATA06__CSI_DATA08                        = IOMUX_PAD(0x0488, 0x01FC, 0, 0x04E4, 1, 0),
+	MX6_PAD_CSI_DATA06__USDHC2_DATA6                      = IOMUX_PAD(0x0488, 0x01FC, 1, 0x0694, 2, 0),
+	MX6_PAD_CSI_DATA06__SIM2_PORT1_SVEN                   = IOMUX_PAD(0x0488, 0x01FC, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA06__ECSPI1_MOSI                       = IOMUX_PAD(0x0488, 0x01FC, 3, 0x053C, 1, 0),
+	MX6_PAD_CSI_DATA06__EIM_AD06                          = IOMUX_PAD(0x0488, 0x01FC, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA06__GPIO4_IO27                        = IOMUX_PAD(0x0488, 0x01FC, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA06__SAI1_RX_DATA                      = IOMUX_PAD(0x0488, 0x01FC, 6, 0x05E4, 1, 0),
+	MX6_PAD_CSI_DATA06__USDHC1_RESET_B                    = IOMUX_PAD(0x0488, 0x01FC, 8, 0x0000, 0, 0),
+
+	MX6_PAD_CSI_DATA07__CSI_DATA09                        = IOMUX_PAD(0x048C, 0x0200, 0, 0x04E8, 1, 0),
+	MX6_PAD_CSI_DATA07__USDHC2_DATA7                      = IOMUX_PAD(0x048C, 0x0200, 1, 0x0698, 2, 0),
+	MX6_PAD_CSI_DATA07__SIM2_PORT1_TRXD                   = IOMUX_PAD(0x048C, 0x0200, 2, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA07__ECSPI1_MISO                       = IOMUX_PAD(0x048C, 0x0200, 3, 0x0538, 1, 0),
+	MX6_PAD_CSI_DATA07__EIM_AD07                          = IOMUX_PAD(0x048C, 0x0200, 4, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA07__GPIO4_IO28                        = IOMUX_PAD(0x048C, 0x0200, 5, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA07__SAI1_TX_DATA                      = IOMUX_PAD(0x048C, 0x0200, 6, 0x0000, 0, 0),
+	MX6_PAD_CSI_DATA07__USDHC1_VSELECT                    = IOMUX_PAD(0x048C, 0x0200, 8, 0x0000, 0, 0),
+};
+#endif  /* __ASM_ARCH_IMX6ULL_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/mxc_hdmi.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/mxc_hdmi.h
new file mode 100644
index 000000000..71ad0e307
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/mxc_hdmi.h
@@ -0,0 +1,1057 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MXC_HDMI_H__
+#define __MXC_HDMI_H__
+
+#ifdef CONFIG_IMX_HDMI
+void imx_enable_hdmi_phy(void);
+void imx_setup_hdmi(void);
+#endif
+
+/*
+ * Hdmi controller registers
+ */
+struct hdmi_regs {
+	/*Identification Registers */
+	u8 design_id;			/* 0x000 */
+	u8 revision_id;			/* 0x001 */
+	u8 product_id0;			/* 0x002 */
+	u8 product_id1;			/* 0x003 */
+	u8 config0_id;			/* 0x004 */
+	u8 config1_id;			/* 0x005 */
+	u8 config2_id;			/* 0x006 */
+	u8 config3_id;			/* 0x007 */
+	u8 reserved1[0xf8];
+	/* Interrupt Registers */
+	u8 ih_fc_stat0;			/* 0x100 */
+	u8 ih_fc_stat1;			/* 0x101 */
+	u8 ih_fc_stat2;			/* 0x102 */
+	u8 ih_as_stat0;			/* 0x103 */
+	u8 ih_phy_stat0;		/* 0x104 */
+	u8 ih_i2cm_stat0;		/* 0x105 */
+	u8 ih_cec_stat0;		/* 0x106 */
+	u8 ih_vp_stat0;			/* 0x107 */
+	u8 ih_i2cmphy_stat0;		/* 0x108 */
+	u8 ih_ahbdmaaud_stat0;		/* 0x109 */
+	u8 reserved2[0x76];
+	u8 ih_mute_fc_stat0;		/* 0x180 */
+	u8 ih_mute_fc_stat1;		/* 0x181 */
+	u8 ih_mute_fc_stat2;		/* 0x182 */
+	u8 ih_mute_as_stat0;		/* 0x183 */
+	u8 ih_mute_phy_stat0;		/* 0x184 */
+	u8 ih_mute_i2cm_stat0;		/* 0x185 */
+	u8 ih_mute_cec_stat0;		/* 0x186 */
+	u8 ih_mute_vp_stat0;		/* 0x187 */
+	u8 ih_mute_i2cmphy_stat0;	/* 0x188 */
+	u8 ih_mute_ahbdmaaud_stat0;	/* 0x189 */
+	u8 reserved3[0x75];
+	u8 ih_mute;			/* 0x1ff */
+	/* Video Sample Registers */
+	u8 tx_invid0;			/* 0x200 */
+	u8 tx_instuffing;		/* 0x201 */
+	u8 tx_gydata0;			/* 0x202 */
+	u8 tx_gydata1;			/* 0x203 */
+	u8 tx_rcrdata0;			/* 0x204 */
+	u8 tx_rcrdata1;			/* 0x205 */
+	u8 tx_bcbdata0;			/* 0x206 */
+	u8 tx_bcbdata1;			/* 0x207 */
+	u8 reserved4[0x5f8];
+	/* Video Packetizer Registers */
+	u8 vp_status;			/* 0x800 */
+	u8 vp_pr_cd;			/* 0x801 */
+	u8 vp_stuff;			/* 0x802 */
+	u8 vp_remap;			/* 0x803 */
+	u8 vp_conf;			/* 0x804 */
+	u8 vp_stat;			/* 0x805 */
+	u8 vp_int;			/* 0x806 */
+	u8 vp_mask;			/* 0x807 */
+	u8 vp_pol;			/* 0x808 */
+	u8 reserved5[0x7f7];
+	/* Frame Composer Registers */
+	u8 fc_invidconf;		/* 0x1000 */
+	u8 fc_inhactv0;			/* 0x1001 */
+	u8 fc_inhactv1;			/* 0x1002 */
+	u8 fc_inhblank0;		/* 0x1003 */
+	u8 fc_inhblank1;		/* 0x1004 */
+	u8 fc_invactv0;			/* 0x1005 */
+	u8 fc_invactv1;			/* 0x1006 */
+	u8 fc_invblank;			/* 0x1007 */
+	u8 fc_hsyncindelay0;		/* 0x1008 */
+	u8 fc_hsyncindelay1;		/* 0x1009 */
+	u8 fc_hsyncinwidth0;		/* 0x100a */
+	u8 fc_hsyncinwidth1;		/* 0x100b */
+	u8 fc_vsyncindelay;		/* 0x100c */
+	u8 fc_vsyncinwidth;		/* 0x100d */
+	u8 fc_infreq0;			/* 0x100e */
+	u8 fc_infreq1;			/* 0x100f */
+	u8 fc_infreq2;			/* 0x1010 */
+	u8 fc_ctrldur;			/* 0x1011 */
+	u8 fc_exctrldur;		/* 0x1012 */
+	u8 fc_exctrlspac;		/* 0x1013 */
+	u8 fc_ch0pream;			/* 0x1014 */
+	u8 fc_ch1pream;			/* 0x1015 */
+	u8 fc_ch2pream;			/* 0x1016 */
+	u8 fc_aviconf3;			/* 0x1017 */
+	u8 fc_gcp;			/* 0x1018 */
+	u8 fc_aviconf0;			/* 0x1019 */
+	u8 fc_aviconf1;			/* 0x101a */
+	u8 fc_aviconf2;			/* 0x101b */
+	u8 fc_avivid;			/* 0x101c */
+	u8 fc_avietb0;			/* 0x101d */
+	u8 fc_avietb1;			/* 0x101e */
+	u8 fc_avisbb0;			/* 0x101f */
+	u8 fc_avisbb1;			/* 0x1020 */
+	u8 fc_avielb0;			/* 0x1021 */
+	u8 fc_avielb1;			/* 0x1022 */
+	u8 fc_avisrb0;			/* 0x1023 */
+	u8 fc_avisrb1;			/* 0x1024 */
+	u8 fc_audiconf0;		/* 0x1025 */
+	u8 fc_audiconf1;		/* 0x1026 */
+	u8 fc_audiconf2;		/* 0x1027 */
+	u8 fc_audiconf3;		/* 0x1028 */
+	u8 fc_vsdieeeid0;		/* 0x1029 */
+	u8 fc_vsdsize;			/* 0x102a */
+	u8 reserved6[5];
+	u8 fc_vsdieeeid1;		/* 0x1030 */
+	u8 fc_vsdieeeid2;		/* 0x1031 */
+	u8 fc_vsdpayload0;		/* 0x1032 */
+	u8 fc_vsdpayload1;		/* 0x1033 */
+	u8 fc_vsdpayload2;		/* 0x1034 */
+	u8 fc_vsdpayload3;		/* 0x1035 */
+	u8 fc_vsdpayload4;		/* 0x1036 */
+	u8 fc_vsdpayload5;		/* 0x1037 */
+	u8 fc_vsdpayload6;		/* 0x1038 */
+	u8 fc_vsdpayload7;		/* 0x1039 */
+	u8 fc_vsdpayload8;		/* 0x103a */
+	u8 fc_vsdpayload9;		/* 0x103b */
+	u8 fc_vsdpayload10;		/* 0x103c */
+	u8 fc_vsdpayload11;		/* 0x103d */
+	u8 fc_vsdpayload12;		/* 0x103e */
+	u8 fc_vsdpayload13;		/* 0x103f */
+	u8 fc_vsdpayload14;		/* 0x1040 */
+	u8 fc_vsdpayload15;		/* 0x1041 */
+	u8 fc_vsdpayload16;		/* 0x1042 */
+	u8 fc_vsdpayload17;		/* 0x1043 */
+	u8 fc_vsdpayload18;		/* 0x1044 */
+	u8 fc_vsdpayload19;		/* 0x1045 */
+	u8 fc_vsdpayload20;		/* 0x1046 */
+	u8 fc_vsdpayload21;		/* 0x1047 */
+	u8 fc_vsdpayload22;		/* 0x1048 */
+	u8 fc_vsdpayload23;		/* 0x1049 */
+	u8 fc_spdvendorname0;		/* 0x104a */
+	u8 fc_spdvendorname1;		/* 0x104b */
+	u8 fc_spdvendorname2;		/* 0x104c */
+	u8 fc_spdvendorname3;		/* 0x104d */
+	u8 fc_spdvendorname4;		/* 0x104e */
+	u8 fc_spdvendorname5;		/* 0x104f */
+	u8 fc_spdvendorname6;		/* 0x1050 */
+	u8 fc_spdvendorname7;		/* 0x1051 */
+	u8 fc_sdpproductname0;		/* 0x1052 */
+	u8 fc_sdpproductname1;		/* 0x1053 */
+	u8 fc_sdpproductname2;		/* 0x1054 */
+	u8 fc_sdpproductname3;		/* 0x1055 */
+	u8 fc_sdpproductname4;		/* 0x1056 */
+	u8 fc_sdpproductname5;		/* 0x1057 */
+	u8 fc_sdpproductname6;		/* 0x1058 */
+	u8 fc_sdpproductname7;		/* 0x1059 */
+	u8 fc_sdpproductname8;		/* 0x105a */
+	u8 fc_sdpproductname9;		/* 0x105b */
+	u8 fc_sdpproductname10;		/* 0x105c */
+	u8 fc_sdpproductname11;		/* 0x105d */
+	u8 fc_sdpproductname12;		/* 0x105e */
+	u8 fc_sdpproductname13;		/* 0x105f */
+	u8 fc_sdpproductname14;		/* 0x1060 */
+	u8 fc_spdproductname15;		/* 0x1061 */
+	u8 fc_spddeviceinf;		/* 0x1062 */
+	u8 fc_audsconf;			/* 0x1063 */
+	u8 fc_audsstat;			/* 0x1064 */
+	u8 reserved7[0xb];
+	u8 fc_datach0fill;		/* 0x1070 */
+	u8 fc_datach1fill;		/* 0x1071 */
+	u8 fc_datach2fill;		/* 0x1072 */
+	u8 fc_ctrlqhigh;		/* 0x1073 */
+	u8 fc_ctrlqlow;			/* 0x1074 */
+	u8 fc_acp0;			/* 0x1075 */
+	u8 fc_acp28;			/* 0x1076 */
+	u8 fc_acp27;			/* 0x1077 */
+	u8 fc_acp26;			/* 0x1078 */
+	u8 fc_acp25;			/* 0x1079 */
+	u8 fc_acp24;			/* 0x107a */
+	u8 fc_acp23;			/* 0x107b */
+	u8 fc_acp22;			/* 0x107c */
+	u8 fc_acp21;			/* 0x107d */
+	u8 fc_acp20;			/* 0x107e */
+	u8 fc_acp19;			/* 0x107f */
+	u8 fc_acp18;			/* 0x1080 */
+	u8 fc_acp17;			/* 0x1081 */
+	u8 fc_acp16;			/* 0x1082 */
+	u8 fc_acp15;			/* 0x1083 */
+	u8 fc_acp14;			/* 0x1084 */
+	u8 fc_acp13;			/* 0x1085 */
+	u8 fc_acp12;			/* 0x1086 */
+	u8 fc_acp11;			/* 0x1087 */
+	u8 fc_acp10;			/* 0x1088 */
+	u8 fc_acp9;			/* 0x1089 */
+	u8 fc_acp8;			/* 0x108a */
+	u8 fc_acp7;			/* 0x108b */
+	u8 fc_acp6;			/* 0x108c */
+	u8 fc_acp5;			/* 0x108d */
+	u8 fc_acp4;			/* 0x108e */
+	u8 fc_acp3;			/* 0x108f */
+	u8 fc_acp2;			/* 0x1090 */
+	u8 fc_acp1;			/* 0x1091 */
+	u8 fc_iscr1_0;			/* 0x1092 */
+	u8 fc_iscr1_16;			/* 0x1093 */
+	u8 fc_iscr1_15;			/* 0x1094 */
+	u8 fc_iscr1_14;			/* 0x1095 */
+	u8 fc_iscr1_13;			/* 0x1096 */
+	u8 fc_iscr1_12;			/* 0x1097 */
+	u8 fc_iscr1_11;			/* 0x1098 */
+	u8 fc_iscr1_10;			/* 0x1099 */
+	u8 fc_iscr1_9;			/* 0x109a */
+	u8 fc_iscr1_8;			/* 0x109b */
+	u8 fc_iscr1_7;			/* 0x109c */
+	u8 fc_iscr1_6;			/* 0x109d */
+	u8 fc_iscr1_5;			/* 0x109e */
+	u8 fc_iscr1_4;			/* 0x109f */
+	u8 fc_iscr1_3;			/* 0x10a0 */
+	u8 fc_iscr1_2;			/* 0x10a1 */
+	u8 fc_iscr1_1;			/* 0x10a2 */
+	u8 fc_iscr2_15;			/* 0x10a3 */
+	u8 fc_iscr2_14;			/* 0x10a4 */
+	u8 fc_iscr2_13;			/* 0x10a5 */
+	u8 fc_iscr2_12;			/* 0x10a6 */
+	u8 fc_iscr2_11;			/* 0x10a7 */
+	u8 fc_iscr2_10;			/* 0x10a8 */
+	u8 fc_iscr2_9;			/* 0x10a9 */
+	u8 fc_iscr2_8;			/* 0x10aa */
+	u8 fc_iscr2_7;			/* 0x10ab */
+	u8 fc_iscr2_6;			/* 0x10ac */
+	u8 fc_iscr2_5;			/* 0x10ad */
+	u8 fc_iscr2_4;			/* 0x10ae */
+	u8 fc_iscr2_3;			/* 0x10af */
+	u8 fc_iscr2_2;			/* 0x10b0 */
+	u8 fc_iscr2_1;			/* 0x10b1 */
+	u8 fc_iscr2_0;			/* 0x10b2 */
+	u8 fc_datauto0;			/* 0x10b3 */
+	u8 fc_datauto1;			/* 0x10b4 */
+	u8 fc_datauto2;			/* 0x10b5 */
+	u8 fc_datman;			/* 0x10b6 */
+	u8 fc_datauto3;			/* 0x10b7 */
+	u8 fc_rdrb0;			/* 0x10b8 */
+	u8 fc_rdrb1;			/* 0x10b9 */
+	u8 fc_rdrb2;			/* 0x10ba */
+	u8 fc_rdrb3;			/* 0x10bb */
+	u8 fc_rdrb4;			/* 0x10bc */
+	u8 fc_rdrb5;			/* 0x10bd */
+	u8 fc_rdrb6;			/* 0x10be */
+	u8 fc_rdrb7;			/* 0x10bf */
+	u8 reserved8[0x10];
+	u8 fc_stat0;			/* 0x10d0 */
+	u8 fc_int0;			/* 0x10d1 */
+	u8 fc_mask0;			/* 0x10d2 */
+	u8 fc_pol0;			/* 0x10d3 */
+	u8 fc_stat1;			/* 0x10d4 */
+	u8 fc_int1;			/* 0x10d5 */
+	u8 fc_mask1;			/* 0x10d6 */
+	u8 fc_pol1;			/* 0x10d7 */
+	u8 fc_stat2;			/* 0x10d8 */
+	u8 fc_int2;			/* 0x10d9 */
+	u8 fc_mask2;			/* 0x10da */
+	u8 fc_pol2;			/* 0x10db */
+	u8 reserved9[0x4];
+	u8 fc_prconf;			/* 0x10e0 */
+	u8 reserved10[0x1f];
+	u8 fc_gmd_stat;			/* 0x1100 */
+	u8 fc_gmd_en;			/* 0x1101 */
+	u8 fc_gmd_up;			/* 0x1102 */
+	u8 fc_gmd_conf;			/* 0x1103 */
+	u8 fc_gmd_hb;			/* 0x1104 */
+	u8 fc_gmd_pb0;			/* 0x1105 */
+	u8 fc_gmd_pb1;			/* 0x1106 */
+	u8 fc_gmd_pb2;			/* 0x1107 */
+	u8 fc_gmd_pb3;			/* 0x1108 */
+	u8 fc_gmd_pb4;			/* 0x1109 */
+	u8 fc_gmd_pb5;			/* 0x110a */
+	u8 fc_gmd_pb6;			/* 0x110b */
+	u8 fc_gmd_pb7;			/* 0x110c */
+	u8 fc_gmd_pb8;			/* 0x110d */
+	u8 fc_gmd_pb9;			/* 0x110e */
+	u8 fc_gmd_pb10;			/* 0x110f */
+	u8 fc_gmd_pb11;			/* 0x1110 */
+	u8 fc_gmd_pb12;			/* 0x1111 */
+	u8 fc_gmd_pb13;			/* 0x1112 */
+	u8 fc_gmd_pb14;			/* 0x1113 */
+	u8 fc_gmd_pb15;			/* 0x1114 */
+	u8 fc_gmd_pb16;			/* 0x1115 */
+	u8 fc_gmd_pb17;			/* 0x1116 */
+	u8 fc_gmd_pb18;			/* 0x1117 */
+	u8 fc_gmd_pb19;			/* 0x1118 */
+	u8 fc_gmd_pb20;			/* 0x1119 */
+	u8 fc_gmd_pb21;			/* 0x111a */
+	u8 fc_gmd_pb22;			/* 0x111b */
+	u8 fc_gmd_pb23;			/* 0x111c */
+	u8 fc_gmd_pb24;			/* 0x111d */
+	u8 fc_gmd_pb25;			/* 0x111e */
+	u8 fc_gmd_pb26;			/* 0x111f */
+	u8 fc_gmd_pb27;			/* 0x1120 */
+	u8 reserved11[0xdf];
+	u8 fc_dbgforce;			/* 0x1200 */
+	u8 fc_dbgaud0ch0;		/* 0x1201 */
+	u8 fc_dbgaud1ch0;		/* 0x1202 */
+	u8 fc_dbgaud2ch0;		/* 0x1203 */
+	u8 fc_dbgaud0ch1;		/* 0x1204 */
+	u8 fc_dbgaud1ch1;		/* 0x1205 */
+	u8 fc_dbgaud2ch1;		/* 0x1206 */
+	u8 fc_dbgaud0ch2;		/* 0x1207 */
+	u8 fc_dbgaud1ch2;		/* 0x1208 */
+	u8 fc_dbgaud2ch2;		/* 0x1209 */
+	u8 fc_dbgaud0ch3;		/* 0x120a */
+	u8 fc_dbgaud1ch3;		/* 0x120b */
+	u8 fc_dbgaud2ch3;		/* 0x120c */
+	u8 fc_dbgaud0ch4;		/* 0x120d */
+	u8 fc_dbgaud1ch4;		/* 0x120e */
+	u8 fc_dbgaud2ch4;		/* 0x120f */
+	u8 fc_dbgaud0ch5;		/* 0x1210 */
+	u8 fc_dbgaud1ch5;		/* 0x1211 */
+	u8 fc_dbgaud2ch5;		/* 0x1212 */
+	u8 fc_dbgaud0ch6;		/* 0x1213 */
+	u8 fc_dbgaud1ch6;		/* 0x1214 */
+	u8 fc_dbgaud2ch6;		/* 0x1215 */
+	u8 fc_dbgaud0ch7;		/* 0x1216 */
+	u8 fc_dbgaud1ch7;		/* 0x1217 */
+	u8 fc_dbgaud2ch7;		/* 0x1218 */
+	u8 fc_dbgtmds0;			/* 0x1219 */
+	u8 fc_dbgtmds1;			/* 0x121a */
+	u8 fc_dbgtmds2;			/* 0x121b */
+	u8 reserved12[0x1de4];
+	/* Hdmi Source Phy Registers */
+	u8 phy_conf0;			/* 0x3000 */
+	u8 phy_tst0;			/* 0x3001 */
+	u8 phy_tst1;			/* 0x3002 */
+	u8 phy_tst2;			/* 0x3003 */
+	u8 phy_stat0;			/* 0x3004 */
+	u8 phy_int0;			/* 0x3005 */
+	u8 phy_mask0;			/* 0x3006 */
+	u8 phy_pol0;			/* 0x3007 */
+	u8 reserved13[0x18];
+	/* Hdmi Master Phy Registers */
+	u8 phy_i2cm_slave_addr;		/* 0x3020 */
+	u8 phy_i2cm_address_addr;	/* 0x3021 */
+	u8 phy_i2cm_datao_1_addr;	/* 0x3022 */
+	u8 phy_i2cm_datao_0_addr;	/* 0x3023 */
+	u8 phy_i2cm_datai_1_addr;	/* 0x3024 */
+	u8 phy_i2cm_datai_0_addr;	/* 0x3025 */
+	u8 phy_i2cm_operation_addr;	/* 0x3026 */
+	u8 phy_i2cm_int_addr;		/* 0x3027 */
+	u8 phy_i2cm_ctlint_addr;	/* 0x3028 */
+	u8 phy_i2cm_div_addr;		/* 0x3029 */
+	u8 phy_i2cm_softrstz_addr;	/* 0x302a */
+	u8 phy_i2cm_ss_scl_hcnt_1_addr;	/* 0x302b */
+	u8 phy_i2cm_ss_scl_hcnt_0_addr;	/* 0x302c */
+	u8 phy_i2cm_ss_scl_lcnt_1_addr;	/* 0x302d */
+	u8 phy_i2cm_ss_scl_lcnt_0_addr;	/* 0x302e */
+	u8 phy_i2cm_fs_scl_hcnt_1_addr;	/* 0x302f */
+	u8 phy_i2cm_fs_scl_hcnt_0_addr;	/* 0x3030 */
+	u8 phy_i2cm_fs_scl_lcnt_1_addr;	/* 0x3031 */
+	u8 phy_i2cm_fs_scl_lcnt_0_addr;	/* 0x3032 */
+	u8 reserved14[0xcd];
+	/* Audio Sampler Registers */
+	u8 aud_conf0;			/* 0x3100 */
+	u8 aud_conf1;			/* 0x3101 */
+	u8 aud_int;			/* 0x3102 */
+	u8 aud_conf2;			/* 0x3103 */
+	u8 reserved15[0xfc];
+	u8 aud_n1;			/* 0x3200 */
+	u8 aud_n2;			/* 0x3201 */
+	u8 aud_n3;			/* 0x3202 */
+	u8 aud_cts1;			/* 0x3203 */
+	u8 aud_cts2;			/* 0x3204 */
+	u8 aud_cts3;			/* 0x3205 */
+	u8 aud_inputclkfs;		/* 0x3206 */
+	u8 reserved16[0xfb];
+	u8 aud_spdifint;		/* 0x3302 */
+	u8 reserved17[0xfd];
+	u8 aud_conf0_hbr;		/* 0x3400 */
+	u8 aud_hbr_status;		/* 0x3401 */
+	u8 aud_hbr_int;			/* 0x3402 */
+	u8 aud_hbr_pol;			/* 0x3403 */
+	u8 aud_hbr_mask;		/* 0x3404 */
+	u8 reserved18[0xfb];
+	/*
+	 * Generic Parallel Audio Interface Registers
+	 * Not used as GPAUD interface is not enabled in hw
+	 */
+	u8 gp_conf0;			/* 0x3500 */
+	u8 gp_conf1;			/* 0x3501 */
+	u8 gp_conf2;			/* 0x3502 */
+	u8 gp_stat;			/* 0x3503 */
+	u8 gp_int;			/* 0x3504 */
+	u8 gp_mask;			/* 0x3505 */
+	u8 gp_pol;			/* 0x3506 */
+	u8 reserved19[0xf9];
+	/* Audio DMA Registers */
+	u8 ahb_dma_conf0;		/* 0x3600 */
+	u8 ahb_dma_start;		/* 0x3601 */
+	u8 ahb_dma_stop;		/* 0x3602 */
+	u8 ahb_dma_thrsld;		/* 0x3603 */
+	u8 ahb_dma_straddr0;		/* 0x3604 */
+	u8 ahb_dma_straddr1;		/* 0x3605 */
+	u8 ahb_dma_straddr2;		/* 0x3606 */
+	u8 ahb_dma_straddr3;		/* 0x3607 */
+	u8 ahb_dma_stpaddr0;		/* 0x3608 */
+	u8 ahb_dma_stpaddr1;		/* 0x3609 */
+	u8 ahb_dma_stpaddr2;		/* 0x360a */
+	u8 ahb_dma_stpaddr3;		/* 0x360b */
+	u8 ahb_dma_bstaddr0;		/* 0x360c */
+	u8 ahb_dma_bstaddr1;		/* 0x360d */
+	u8 ahb_dma_bstaddr2;		/* 0x360e */
+	u8 ahb_dma_bstaddr3;		/* 0x360f */
+	u8 ahb_dma_mblength0;		/* 0x3610 */
+	u8 ahb_dma_mblength1;		/* 0x3611 */
+	u8 ahb_dma_stat;		/* 0x3612 */
+	u8 ahb_dma_int;			/* 0x3613 */
+	u8 ahb_dma_mask;		/* 0x3614 */
+	u8 ahb_dma_pol;			/* 0x3615 */
+	u8 ahb_dma_conf1;		/* 0x3616 */
+	u8 ahb_dma_buffstat;		/* 0x3617 */
+	u8 ahb_dma_buffint;		/* 0x3618 */
+	u8 ahb_dma_buffmask;		/* 0x3619 */
+	u8 ahb_dma_buffpol;		/* 0x361a */
+	u8 reserved20[0x9e5];
+	/* Main Controller Registers */
+	u8 mc_sfrdiv;			/* 0x4000 */
+	u8 mc_clkdis;			/* 0x4001 */
+	u8 mc_swrstz;			/* 0x4002 */
+	u8 mc_opctrl;			/* 0x4003 */
+	u8 mc_flowctrl;			/* 0x4004 */
+	u8 mc_phyrstz;			/* 0x4005 */
+	u8 mc_lockonclock;		/* 0x4006 */
+	u8 mc_heacphy_rst;		/* 0x4007 */
+	u8 reserved21[0xf8];
+	/* Colorspace Converter Registers */
+	u8 csc_cfg;			/* 0x4100 */
+	u8 csc_scale;			/* 0x4101 */
+	u8 csc_coef_a1_msb;		/* 0x4102 */
+	u8 csc_coef_a1_lsb;		/* 0x4103 */
+	u8 csc_coef_a2_msb;		/* 0x4104 */
+	u8 csc_coef_a2_lsb;		/* 0x4105 */
+	u8 csc_coef_a3_msb;		/* 0x4106 */
+	u8 csc_coef_a3_lsb;		/* 0x4107 */
+	u8 csc_coef_a4_msb;		/* 0x4108 */
+	u8 csc_coef_a4_lsb;		/* 0x4109 */
+	u8 csc_coef_b1_msb;		/* 0x410a */
+	u8 csc_coef_b1_lsb;		/* 0x410b */
+	u8 csc_coef_b2_msb;		/* 0x410c */
+	u8 csc_coef_b2_lsb;		/* 0x410d */
+	u8 csc_coef_b3_msb;		/* 0x410e */
+	u8 csc_coef_b3_lsb;		/* 0x410f */
+	u8 csc_coef_b4_msb;		/* 0x4110 */
+	u8 csc_coef_b4_lsb;		/* 0x4111 */
+	u8 csc_coef_c1_msb;		/* 0x4112 */
+	u8 csc_coef_c1_lsb;		/* 0x4113 */
+	u8 csc_coef_c2_msb;		/* 0x4114 */
+	u8 csc_coef_c2_lsb;		/* 0x4115 */
+	u8 csc_coef_c3_msb;		/* 0x4116 */
+	u8 csc_coef_c3_lsb;		/* 0x4117 */
+	u8 csc_coef_c4_msb;		/* 0x4118 */
+	u8 csc_coef_c4_lsb;		/* 0x4119 */
+	u8 reserved22[0xee6];
+	/* HDCP Encryption Engine Registers */
+	u8 a_hdcpcfg0;			/* 0x5000 */
+	u8 a_hdcpcfg1;			/* 0x5001 */
+	u8 a_hdcpobs0;			/* 0x5002 */
+	u8 a_hdcpobs1;			/* 0x5003 */
+	u8 a_hdcpobs2;			/* 0x5004 */
+	u8 a_hdcpobs3;			/* 0x5005 */
+	u8 a_apiintclr;			/* 0x5006 */
+	u8 a_apiintstat;		/* 0x5007 */
+	u8 a_apiintmsk;			/* 0x5008 */
+	u8 a_vidpolcfg;			/* 0x5009 */
+	u8 a_oesswcfg;			/* 0x500a */
+	u8 a_timer1setup0;		/* 0x500b */
+	u8 a_timer1setup1;		/* 0x500c */
+	u8 a_timer2setup0;		/* 0x500d */
+	u8 a_timer2setup1;		/* 0x500e */
+	u8 a_100mscfg;			/* 0x500f */
+	u8 a_2scfg0;			/* 0x5010 */
+	u8 a_2scfg1;			/* 0x5011 */
+	u8 a_5scfg0;			/* 0x5012 */
+	u8 a_5scfg1;			/* 0x5013 */
+	u8 a_srmverlsb;			/* 0x5014 */
+	u8 a_srmvermsb;			/* 0x5015 */
+	u8 a_srmctrl;			/* 0x5016 */
+	u8 a_sfrsetup;			/* 0x5017 */
+	u8 a_i2chsetup;			/* 0x5018 */
+	u8 a_intsetup;			/* 0x5019 */
+	u8 a_presetup;			/* 0x501a */
+	u8 reserved23[0x5];
+	u8 a_srm_base;			/* 0x5020 */
+	u8 reserved24[0x2cdf];
+	/* CEC Engine Registers */
+	u8 cec_ctrl;			/* 0x7d00 */
+	u8 cec_stat;			/* 0x7d01 */
+	u8 cec_mask;			/* 0x7d02 */
+	u8 cec_polarity;		/* 0x7d03 */
+	u8 cec_int;			/* 0x7d04 */
+	u8 cec_addr_l;			/* 0x7d05 */
+	u8 cec_addr_h;			/* 0x7d06 */
+	u8 cec_tx_cnt;			/* 0x7d07 */
+	u8 cec_rx_cnt;			/* 0x7d08 */
+	u8 reserved25[0x7];
+	u8 cec_tx_data0;		/* 0x7d10 */
+	u8 cec_tx_data1;		/* 0x7d11 */
+	u8 cec_tx_data2;		/* 0x7d12 */
+	u8 cec_tx_data3;		/* 0x7d13 */
+	u8 cec_tx_data4;		/* 0x7d14 */
+	u8 cec_tx_data5;		/* 0x7d15 */
+	u8 cec_tx_data6;		/* 0x7d16 */
+	u8 cec_tx_data7;		/* 0x7d17 */
+	u8 cec_tx_data8;		/* 0x7d18 */
+	u8 cec_tx_data9;		/* 0x7d19 */
+	u8 cec_tx_data10;		/* 0x7d1a */
+	u8 cec_tx_data11;		/* 0x7d1b */
+	u8 cec_tx_data12;		/* 0x7d1c */
+	u8 cec_tx_data13;		/* 0x7d1d */
+	u8 cec_tx_data14;		/* 0x7d1e */
+	u8 cec_tx_data15;		/* 0x7d1f */
+	u8 cec_rx_data0;		/* 0x7d20 */
+	u8 cec_rx_data1;		/* 0x7d21 */
+	u8 cec_rx_data2;		/* 0x7d22 */
+	u8 cec_rx_data3;		/* 0x7d23 */
+	u8 cec_rx_data4;		/* 0x7d24 */
+	u8 cec_rx_data5;		/* 0x7d25 */
+	u8 cec_rx_data6;		/* 0x7d26 */
+	u8 cec_rx_data7;		/* 0x7d27 */
+	u8 cec_rx_data8;		/* 0x7d28 */
+	u8 cec_rx_data9;		/* 0x7d29 */
+	u8 cec_rx_data10;		/* 0x7d2a */
+	u8 cec_rx_data11;		/* 0x7d2b */
+	u8 cec_rx_data12;		/* 0x7d2c */
+	u8 cec_rx_data13;		/* 0x7d2d */
+	u8 cec_rx_data14;		/* 0x7d2e */
+	u8 cec_rx_data15;		/* 0x7d2f */
+	u8 cec_lock;			/* 0x7d30 */
+	u8 cec_wkupctrl;		/* 0x7d31 */
+	u8 reserved26[0xce];
+	/* I2C Master Registers (E-DDC) */
+	u8 i2cm_slave;			/* 0x7e00 */
+	u8 i2cmess;			/* 0x7e01 */
+	u8 i2cm_datao;			/* 0x7e02 */
+	u8 i2cm_datai;			/* 0x7e03 */
+	u8 i2cm_operation;		/* 0x7e04 */
+	u8 i2cm_int;			/* 0x7e05 */
+	u8 i2cm_ctlint;			/* 0x7e06 */
+	u8 i2cm_div;			/* 0x7e07 */
+	u8 i2cm_segaddr;		/* 0x7e08 */
+	u8 i2cm_softrstz;		/* 0x7e09 */
+	u8 i2cm_segptr;			/* 0x7e0a */
+	u8 i2cm_ss_scl_hcnt_1_addr;	/* 0x7e0b */
+	u8 i2cm_ss_scl_hcnt_0_addr;	/* 0x7e0c */
+	u8 i2cm_ss_scl_lcnt_1_addr;	/* 0x7e0d */
+	u8 i2cm_ss_scl_lcnt_0_addr;	/* 0x7e0e */
+	u8 i2cm_fs_scl_hcnt_1_addr;	/* 0x7e0f */
+	u8 i2cm_fs_scl_hcnt_0_addr;	/* 0x7e10 */
+	u8 i2cm_fs_scl_lcnt_1_addr;	/* 0x7e11 */
+	u8 i2cm_fs_scl_lcnt_0_addr;	/* 0x7e12 */
+	u8 reserved27[0x1ed];
+	/* Random Number Generator Registers (RNG) */
+	u8 rng_base;			/* 0x8000 */
+};
+
+/*
+ * Register field definitions
+ */
+enum {
+/* IH_FC_INT2 field values */
+	HDMI_IH_FC_INT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_FC_STAT2 field values */
+	HDMI_IH_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_PHY_STAT0 field values */
+	HDMI_IH_PHY_STAT0_RX_SENSE3 = 0x20,
+	HDMI_IH_PHY_STAT0_RX_SENSE2 = 0x10,
+	HDMI_IH_PHY_STAT0_RX_SENSE1 = 0x8,
+	HDMI_IH_PHY_STAT0_RX_SENSE0 = 0x4,
+	HDMI_IH_PHY_STAT0_TX_PHY_LOCK = 0x2,
+	HDMI_IH_PHY_STAT0_HPD = 0x1,
+
+/* IH_MUTE_I2CMPHY_STAT0 field values */
+	HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYDONE = 0x2,
+	HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYERROR = 0x1,
+
+/* IH_AHBDMAAUD_STAT0 field values */
+	HDMI_IH_AHBDMAAUD_STAT0_ERROR = 0x20,
+	HDMI_IH_AHBDMAAUD_STAT0_LOST = 0x10,
+	HDMI_IH_AHBDMAAUD_STAT0_RETRY = 0x08,
+	HDMI_IH_AHBDMAAUD_STAT0_DONE = 0x04,
+	HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = 0x02,
+	HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01,
+
+/* IH_MUTE_FC_STAT2 field values */
+	HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_MUTE_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_MUTE_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_MUTE_AHBDMAAUD_STAT0 field values */
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = 0x20,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = 0x10,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = 0x08,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = 0x04,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = 0x02,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01,
+
+/* IH_MUTE field values */
+	HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT = 0x2,
+	HDMI_IH_MUTE_MUTE_ALL_INTERRUPT = 0x1,
+
+/* TX_INVID0 field values */
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_MASK = 0x80,
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_ENABLE = 0x80,
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE = 0x00,
+	HDMI_TX_INVID0_VIDEO_MAPPING_MASK = 0x1F,
+	HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET = 0,
+
+/* TX_INSTUFFING field values */
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_MASK = 0x4,
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE = 0x4,
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_DISABLE = 0x0,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_MASK = 0x2,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE = 0x2,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_DISABLE = 0x0,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_MASK = 0x1,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE = 0x1,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_DISABLE = 0x0,
+
+/* VP_PR_CD field values */
+	HDMI_VP_PR_CD_COLOR_DEPTH_MASK = 0xF0,
+	HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET = 4,
+	HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK = 0x0F,
+	HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET = 0,
+
+/* VP_STUFF field values */
+	HDMI_VP_STUFF_IDEFAULT_PHASE_MASK = 0x20,
+	HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET = 5,
+	HDMI_VP_STUFF_IFIX_PP_TO_LAST_MASK = 0x10,
+	HDMI_VP_STUFF_IFIX_PP_TO_LAST_OFFSET = 4,
+	HDMI_VP_STUFF_ICX_GOTO_P0_ST_MASK = 0x8,
+	HDMI_VP_STUFF_ICX_GOTO_P0_ST_OFFSET = 3,
+	HDMI_VP_STUFF_YCC422_STUFFING_MASK = 0x4,
+	HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE = 0x4,
+	HDMI_VP_STUFF_YCC422_STUFFING_DIRECT_MODE = 0x0,
+	HDMI_VP_STUFF_PP_STUFFING_MASK = 0x2,
+	HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE = 0x2,
+	HDMI_VP_STUFF_PP_STUFFING_DIRECT_MODE = 0x0,
+	HDMI_VP_STUFF_PR_STUFFING_MASK = 0x1,
+	HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE = 0x1,
+	HDMI_VP_STUFF_PR_STUFFING_DIRECT_MODE = 0x0,
+
+/* VP_CONF field values */
+	HDMI_VP_CONF_BYPASS_EN_MASK = 0x40,
+	HDMI_VP_CONF_BYPASS_EN_ENABLE = 0x40,
+	HDMI_VP_CONF_BYPASS_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_PP_EN_ENMASK = 0x20,
+	HDMI_VP_CONF_PP_EN_ENABLE = 0x20,
+	HDMI_VP_CONF_PP_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_PR_EN_MASK = 0x10,
+	HDMI_VP_CONF_PR_EN_ENABLE = 0x10,
+	HDMI_VP_CONF_PR_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_YCC422_EN_MASK = 0x8,
+	HDMI_VP_CONF_YCC422_EN_ENABLE = 0x8,
+	HDMI_VP_CONF_YCC422_EN_DISABLE = 0x0,
+	HDMI_VP_CONF_BYPASS_SELECT_MASK = 0x4,
+	HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER = 0x4,
+	HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER = 0x0,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_MASK = 0x3,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS = 0x3,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422 = 0x1,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_PP = 0x0,
+
+/* VP_REMAP field values */
+	HDMI_VP_REMAP_MASK = 0x3,
+	HDMI_VP_REMAP_YCC422_24bit = 0x2,
+	HDMI_VP_REMAP_YCC422_20bit = 0x1,
+	HDMI_VP_REMAP_YCC422_16bit = 0x0,
+
+/* FC_INVIDCONF field values */
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_MASK = 0x80,
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE = 0x80,
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE = 0x00,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_MASK = 0x40,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH = 0x40,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_MASK = 0x20,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH = 0x20,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_MASK = 0x10,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH = 0x10,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_MASK = 0x8,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE = 0x8,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE = 0x0,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_MASK = 0x2,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH = 0x2,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW = 0x0,
+	HDMI_FC_INVIDCONF_IN_I_P_MASK = 0x1,
+	HDMI_FC_INVIDCONF_IN_I_P_INTERLACED = 0x1,
+	HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE = 0x0,
+
+/* FC_AUDICONF0 field values */
+	HDMI_FC_AUDICONF0_CC_OFFSET = 4,
+	HDMI_FC_AUDICONF0_CC_MASK = 0x70,
+	HDMI_FC_AUDICONF0_CT_OFFSET = 0,
+	HDMI_FC_AUDICONF0_CT_MASK = 0xF,
+
+/* FC_AUDICONF1 field values */
+	HDMI_FC_AUDICONF1_SS_OFFSET = 3,
+	HDMI_FC_AUDICONF1_SS_MASK = 0x18,
+	HDMI_FC_AUDICONF1_SF_OFFSET = 0,
+	HDMI_FC_AUDICONF1_SF_MASK = 0x7,
+
+/* FC_AUDICONF3 field values */
+	HDMI_FC_AUDICONF3_LFEPBL_OFFSET = 5,
+	HDMI_FC_AUDICONF3_LFEPBL_MASK = 0x60,
+	HDMI_FC_AUDICONF3_DM_INH_OFFSET = 4,
+	HDMI_FC_AUDICONF3_DM_INH_MASK = 0x10,
+	HDMI_FC_AUDICONF3_LSV_OFFSET = 0,
+	HDMI_FC_AUDICONF3_LSV_MASK = 0xF,
+
+/* FC_AUDSCHNLS0 field values */
+	HDMI_FC_AUDSCHNLS0_CGMSA_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS0_CGMSA_MASK = 0x30,
+	HDMI_FC_AUDSCHNLS0_COPYRIGHT_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS0_COPYRIGHT_MASK = 0x01,
+
+/* FC_AUDSCHNLS3-6 field values */
+	HDMI_FC_AUDSCHNLS3_OIEC_CH0_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH0_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH1_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH1_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH2_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH2_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH3_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH3_MASK = 0xf0,
+
+	HDMI_FC_AUDSCHNLS5_OIEC_CH0_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH0_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH1_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH1_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH2_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH2_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH3_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH3_MASK = 0xf0,
+
+/* HDMI_FC_AUDSCHNLS7 field values */
+	HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
+
+/* HDMI_FC_AUDSCHNLS8 field values */
+	HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS8_WORDLEGNTH_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET = 0,
+
+/* FC_AUDSCONF field values */
+	HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_MASK = 0xF0,
+	HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_OFFSET = 4,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_MASK = 0x1,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_OFFSET = 0,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT1 = 0x1,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT0 = 0x0,
+
+/* FC_STAT2 field values */
+	HDMI_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_INT2 field values */
+	HDMI_FC_INT2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_MASK2 field values */
+	HDMI_FC_MASK2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_MASK2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_MASK2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_PRCONF field values */
+	HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK = 0xF0,
+	HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET = 4,
+	HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK = 0x0F,
+	HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET = 0,
+
+/* FC_AVICONF0-FC_AVICONF3 field values */
+	HDMI_FC_AVICONF0_PIX_FMT_MASK = 0x03,
+	HDMI_FC_AVICONF0_PIX_FMT_RGB = 0x00,
+	HDMI_FC_AVICONF0_PIX_FMT_YCBCR422 = 0x01,
+	HDMI_FC_AVICONF0_PIX_FMT_YCBCR444 = 0x02,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_MASK = 0x40,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT = 0x40,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_NO_INFO = 0x00,
+	HDMI_FC_AVICONF0_BAR_DATA_MASK = 0x0C,
+	HDMI_FC_AVICONF0_BAR_DATA_NO_DATA = 0x00,
+	HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR = 0x04,
+	HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR = 0x08,
+	HDMI_FC_AVICONF0_BAR_DATA_VERT_HORIZ_BAR = 0x0C,
+	HDMI_FC_AVICONF0_SCAN_INFO_MASK = 0x30,
+	HDMI_FC_AVICONF0_SCAN_INFO_OVERSCAN = 0x10,
+	HDMI_FC_AVICONF0_SCAN_INFO_UNDERSCAN = 0x20,
+	HDMI_FC_AVICONF0_SCAN_INFO_NODATA = 0x00,
+
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_MASK = 0x0F,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_USE_CODED = 0x08,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_4_3 = 0x09,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_16_9 = 0x0A,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_14_9 = 0x0B,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_MASK = 0x30,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_NO_DATA = 0x00,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_4_3 = 0x10,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_16_9 = 0x20,
+	HDMI_FC_AVICONF1_COLORIMETRY_MASK = 0xC0,
+	HDMI_FC_AVICONF1_COLORIMETRY_NO_DATA = 0x00,
+	HDMI_FC_AVICONF1_COLORIMETRY_SMPTE = 0x40,
+	HDMI_FC_AVICONF1_COLORIMETRY_ITUR = 0x80,
+	HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO = 0xC0,
+
+	HDMI_FC_AVICONF2_SCALING_MASK = 0x03,
+	HDMI_FC_AVICONF2_SCALING_NONE = 0x00,
+	HDMI_FC_AVICONF2_SCALING_HORIZ = 0x01,
+	HDMI_FC_AVICONF2_SCALING_VERT = 0x02,
+	HDMI_FC_AVICONF2_SCALING_HORIZ_VERT = 0x03,
+	HDMI_FC_AVICONF2_RGB_QUANT_MASK = 0x0C,
+	HDMI_FC_AVICONF2_RGB_QUANT_DEFAULT = 0x00,
+	HDMI_FC_AVICONF2_RGB_QUANT_LIMITED_RANGE = 0x04,
+	HDMI_FC_AVICONF2_RGB_QUANT_FULL_RANGE = 0x08,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_MASK = 0x70,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601 = 0x00,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709 = 0x10,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_SYCC601 = 0x20,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_YCC601 = 0x30,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_RGB = 0x40,
+	HDMI_FC_AVICONF2_IT_CONTENT_MASK = 0x80,
+	HDMI_FC_AVICONF2_IT_CONTENT_NO_DATA = 0x00,
+	HDMI_FC_AVICONF2_IT_CONTENT_VALID = 0x80,
+
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_MASK = 0x03,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GRAPHICS = 0x00,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_PHOTO = 0x01,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_CINEMA = 0x02,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GAME = 0x03,
+	HDMI_FC_AVICONF3_QUANT_RANGE_MASK = 0x0C,
+	HDMI_FC_AVICONF3_QUANT_RANGE_LIMITED = 0x00,
+	HDMI_FC_AVICONF3_QUANT_RANGE_FULL = 0x04,
+
+/* FC_DBGFORCE field values */
+	HDMI_FC_DBGFORCE_FORCEAUDIO = 0x10,
+	HDMI_FC_DBGFORCE_FORCEVIDEO = 0x1,
+
+/* PHY_CONF0 field values */
+	HDMI_PHY_CONF0_PDZ_MASK = 0x80,
+	HDMI_PHY_CONF0_PDZ_OFFSET = 7,
+	HDMI_PHY_CONF0_ENTMDS_MASK = 0x40,
+	HDMI_PHY_CONF0_ENTMDS_OFFSET = 6,
+	HDMI_PHY_CONF0_SPARECTRL = 0x20,
+	HDMI_PHY_CONF0_GEN2_PDDQ_MASK = 0x10,
+	HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET = 4,
+	HDMI_PHY_CONF0_GEN2_TXPWRON_MASK = 0x8,
+	HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET = 3,
+	HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_MASK = 0x4,
+	HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_OFFSET = 2,
+	HDMI_PHY_CONF0_SELDATAENPOL_MASK = 0x2,
+	HDMI_PHY_CONF0_SELDATAENPOL_OFFSET = 1,
+	HDMI_PHY_CONF0_SELDIPIF_MASK = 0x1,
+	HDMI_PHY_CONF0_SELDIPIF_OFFSET = 0,
+
+/* PHY_TST0 field values */
+	HDMI_PHY_TST0_TSTCLR_MASK = 0x20,
+	HDMI_PHY_TST0_TSTCLR_OFFSET = 5,
+	HDMI_PHY_TST0_TSTEN_MASK = 0x10,
+	HDMI_PHY_TST0_TSTEN_OFFSET = 4,
+	HDMI_PHY_TST0_TSTCLK_MASK = 0x1,
+	HDMI_PHY_TST0_TSTCLK_OFFSET = 0,
+
+/* PHY_STAT0 field values */
+	HDMI_PHY_RX_SENSE3 = 0x80,
+	HDMI_PHY_RX_SENSE2 = 0x40,
+	HDMI_PHY_RX_SENSE1 = 0x20,
+	HDMI_PHY_RX_SENSE0 = 0x10,
+	HDMI_PHY_HPD = 0x02,
+	HDMI_PHY_TX_PHY_LOCK = 0x01,
+
+/* Convenience macro RX_SENSE | HPD */
+	HDMI_DVI_STAT = 0xF2,
+
+/* PHY_I2CM_SLAVE_ADDR field values */
+	HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69,
+	HDMI_PHY_I2CM_SLAVE_ADDR_HEAC_PHY = 0x49,
+
+/* PHY_I2CM_OPERATION_ADDR field values */
+	HDMI_PHY_I2CM_OPERATION_ADDR_WRITE = 0x10,
+	HDMI_PHY_I2CM_OPERATION_ADDR_READ = 0x1,
+
+/* HDMI_PHY_I2CM_INT_ADDR */
+	HDMI_PHY_I2CM_INT_ADDR_DONE_POL = 0x08,
+	HDMI_PHY_I2CM_INT_ADDR_DONE_MASK = 0x04,
+
+/* HDMI_PHY_I2CM_CTLINT_ADDR */
+	HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL = 0x80,
+	HDMI_PHY_I2CM_CTLINT_ADDR_NAC_MASK = 0x40,
+	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08,
+	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_MASK = 0x04,
+
+/* AUD_CTS3 field values */
+	HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5,
+	HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,
+	HDMI_AUD_CTS3_N_SHIFT_1 = 0,
+	HDMI_AUD_CTS3_N_SHIFT_16 = 0x20,
+	HDMI_AUD_CTS3_N_SHIFT_32 = 0x40,
+	HDMI_AUD_CTS3_N_SHIFT_64 = 0x60,
+	HDMI_AUD_CTS3_N_SHIFT_128 = 0x80,
+	HDMI_AUD_CTS3_N_SHIFT_256 = 0xa0,
+	/* note that the CTS3 MANUAL bit has been removed
+	   from our part. Can't set it, will read as 0. */
+	HDMI_AUD_CTS3_CTS_MANUAL = 0x10,
+	HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f,
+
+/* AHB_DMA_CONF0 field values */
+	HDMI_AHB_DMA_CONF0_SW_FIFO_RST_OFFSET = 7,
+	HDMI_AHB_DMA_CONF0_SW_FIFO_RST_MASK = 0x80,
+	HDMI_AHB_DMA_CONF0_HBR = 0x10,
+	HDMI_AHB_DMA_CONF0_EN_HLOCK_OFFSET = 3,
+	HDMI_AHB_DMA_CONF0_EN_HLOCK_MASK = 0x08,
+	HDMI_AHB_DMA_CONF0_INCR_TYPE_OFFSET = 1,
+	HDMI_AHB_DMA_CONF0_INCR_TYPE_MASK = 0x06,
+	HDMI_AHB_DMA_CONF0_INCR4 = 0x0,
+	HDMI_AHB_DMA_CONF0_INCR8 = 0x2,
+	HDMI_AHB_DMA_CONF0_INCR16 = 0x4,
+	HDMI_AHB_DMA_CONF0_BURST_MODE = 0x1,
+
+/* HDMI_AHB_DMA_START field values */
+	HDMI_AHB_DMA_START_START_OFFSET = 0,
+	HDMI_AHB_DMA_START_START_MASK = 0x01,
+
+/* HDMI_AHB_DMA_STOP field values */
+	HDMI_AHB_DMA_STOP_STOP_OFFSET = 0,
+	HDMI_AHB_DMA_STOP_STOP_MASK = 0x01,
+
+/* AHB_DMA_STAT, AHB_DMA_INT, AHB_DMA_MASK, AHB_DMA_POL field values */
+	HDMI_AHB_DMA_DONE = 0x80,
+	HDMI_AHB_DMA_RETRY_SPLIT = 0x40,
+	HDMI_AHB_DMA_LOSTOWNERSHIP = 0x20,
+	HDMI_AHB_DMA_ERROR = 0x10,
+	HDMI_AHB_DMA_FIFO_THREMPTY = 0x04,
+	HDMI_AHB_DMA_FIFO_FULL = 0x02,
+	HDMI_AHB_DMA_FIFO_EMPTY = 0x01,
+
+/* AHB_DMA_BUFFSTAT, AHB_DMA_BUFFINT, AHB_DMA_BUFFMASK, AHB_DMA_BUFFPOL field values */
+	HDMI_AHB_DMA_BUFFSTAT_FULL = 0x02,
+	HDMI_AHB_DMA_BUFFSTAT_EMPTY = 0x01,
+
+/* MC_CLKDIS field values */
+	HDMI_MC_CLKDIS_HDCPCLK_DISABLE = 0x40,
+	HDMI_MC_CLKDIS_CECCLK_DISABLE = 0x20,
+	HDMI_MC_CLKDIS_CSCCLK_DISABLE = 0x10,
+	HDMI_MC_CLKDIS_AUDCLK_DISABLE = 0x8,
+	HDMI_MC_CLKDIS_PREPCLK_DISABLE = 0x4,
+	HDMI_MC_CLKDIS_TMDSCLK_DISABLE = 0x2,
+	HDMI_MC_CLKDIS_PIXELCLK_DISABLE = 0x1,
+
+/* MC_SWRSTZ field values */
+	HDMI_MC_SWRSTZ_TMDSSWRST_REQ = 0x02,
+
+/* MC_FLOWCTRL field values */
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_MASK = 0x1,
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH = 0x1,
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS = 0x0,
+
+/* MC_PHYRSTZ field values */
+	HDMI_MC_PHYRSTZ_ASSERT = 0x0,
+	HDMI_MC_PHYRSTZ_DEASSERT = 0x1,
+
+/* MC_HEACPHY_RST field values */
+	HDMI_MC_HEACPHY_RST_ASSERT = 0x1,
+	HDMI_MC_HEACPHY_RST_DEASSERT = 0x0,
+
+/* CSC_CFG field values */
+	HDMI_CSC_CFG_INTMODE_MASK = 0x30,
+	HDMI_CSC_CFG_INTMODE_OFFSET = 4,
+	HDMI_CSC_CFG_INTMODE_DISABLE = 0x00,
+	HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1 = 0x10,
+	HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA2 = 0x20,
+	HDMI_CSC_CFG_DECMODE_MASK = 0x3,
+	HDMI_CSC_CFG_DECMODE_OFFSET = 0,
+	HDMI_CSC_CFG_DECMODE_DISABLE = 0x0,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA1 = 0x1,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA2 = 0x2,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3 = 0x3,
+
+/* CSC_SCALE field values */
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK = 0xF0,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP = 0x00,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP = 0x50,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP = 0x60,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP = 0x70,
+	HDMI_CSC_SCALE_CSCSCALE_MASK = 0x03,
+
+/* A_HDCPCFG0 field values */
+	HDMI_A_HDCPCFG0_ELVENA_MASK = 0x80,
+	HDMI_A_HDCPCFG0_ELVENA_ENABLE = 0x80,
+	HDMI_A_HDCPCFG0_ELVENA_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_MASK = 0x40,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_ENABLE = 0x40,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_MASK = 0x20,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_ENABLE = 0x20,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_MASK = 0x10,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_ENABLE = 0x10,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_AVMUTE_MASK = 0x8,
+	HDMI_A_HDCPCFG0_AVMUTE_ENABLE = 0x8,
+	HDMI_A_HDCPCFG0_AVMUTE_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_RXDETECT_MASK = 0x4,
+	HDMI_A_HDCPCFG0_RXDETECT_ENABLE = 0x4,
+	HDMI_A_HDCPCFG0_RXDETECT_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_EN11FEATURE_MASK = 0x2,
+	HDMI_A_HDCPCFG0_EN11FEATURE_ENABLE = 0x2,
+	HDMI_A_HDCPCFG0_EN11FEATURE_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_HDMIDVI_MASK = 0x1,
+	HDMI_A_HDCPCFG0_HDMIDVI_HDMI = 0x1,
+	HDMI_A_HDCPCFG0_HDMIDVI_DVI = 0x0,
+
+/* A_HDCPCFG1 field values */
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_MASK = 0x8,
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_DISABLE = 0x8,
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_ENABLE = 0x0,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_MASK = 0x4,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_ENABLE = 0x4,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_DISABLE = 0x0,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK = 0x2,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE = 0x2,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_ENABLE = 0x0,
+	HDMI_A_HDCPCFG1_SWRESET_MASK = 0x1,
+	HDMI_A_HDCPCFG1_SWRESET_ASSERT = 0x0,
+
+/* A_VIDPOLCFG field values */
+	HDMI_A_VIDPOLCFG_UNENCRYPTCONF_MASK = 0x60,
+	HDMI_A_VIDPOLCFG_UNENCRYPTCONF_OFFSET = 5,
+	HDMI_A_VIDPOLCFG_DATAENPOL_MASK = 0x10,
+	HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH = 0x10,
+	HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW = 0x0,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_MASK = 0x8,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_HIGH = 0x8,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_LOW = 0x0,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_MASK = 0x2,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_HIGH = 0x2,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_LOW = 0x0,
+};
+
+#endif /* __MXC_HDMI_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/opos6ul.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/opos6ul.h
new file mode 100644
index 000000000..b55a54cf1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/opos6ul.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Armadeus Systems
+ */
+
+#ifndef __ARCH_ARM_MX6UL_OPOS6UL_H__
+#define __ARCH_ARM_MX6UL_OPOS6UL_H__
+
+int opos6ul_board_late_init(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx6/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-mx6/sys_proto.h
new file mode 100644
index 000000000..1e5fa1a75
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ */
+
+#ifndef __SYS_PROTO_IMX6_
+#define __SYS_PROTO_IMX6_
+
+#include <asm/mach-imx/sys_proto.h>
+#include <asm/arch/iomux.h>
+
+#define USBPHY_PWD		0x00000000
+
+#define USBPHY_PWD_RXPWDRX	(1 << 20) /* receiver block power down */
+
+#define is_usbotg_phy_active(void) (!(readl(USB_PHY0_BASE_ADDR + USBPHY_PWD) & \
+				   USBPHY_PWD_RXPWDRX))
+
+int imx6_pcie_toggle_power(void);
+int imx6_pcie_toggle_reset(void);
+
+enum ldo_reg {
+	LDO_ARM,
+	LDO_SOC,
+	LDO_PU,
+};
+
+int set_ldo_voltage(enum ldo_reg ldo, u32 mv);
+
+/**
+ * iomuxc_set_rgmii_io_voltage - set voltage level of RGMII/USB pins
+ *
+ * @param io_vol - the voltage IO level of pins
+ */
+static inline void iomuxc_set_rgmii_io_voltage(int io_vol)
+{
+	__raw_writel(io_vol, IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE_RGMII);
+}
+
+#endif /* __SYS_PROTO_IMX6_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/clock.h
new file mode 100644
index 000000000..48c7c3367
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/clock.h
@@ -0,0 +1,364 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * Author:
+ *	Peng Fan <Peng.Fan@freescale.com>
+ */
+
+#ifndef _ASM_ARCH_CLOCK_H
+#define _ASM_ARCH_CLOCK_H
+
+#include <asm/arch/crm_regs.h>
+
+#ifdef CONFIG_SYS_MX7_HCLK
+#define MXC_HCLK	CONFIG_SYS_MX7_HCLK
+#else
+#define MXC_HCLK	24000000
+#endif
+
+#ifdef CONFIG_SYS_MX7_CLK32
+#define MXC_CLK32	CONFIG_SYS_MX7_CLK32
+#else
+#define MXC_CLK32	32768
+#endif
+
+/* Mainly for compatible to imx common code. */
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_UART_CLK,
+	MXC_CSPI_CLK,
+	MXC_AXI_CLK,
+	MXC_DDR_CLK,
+	MXC_ESDHC_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_ESDHC3_CLK,
+	MXC_I2C_CLK,
+};
+
+/* PLL supported by i.mx7d */
+enum pll_clocks {
+	PLL_CORE,	/* Core PLL */
+	PLL_SYS,	/* System PLL*/
+	PLL_ENET,	/* Enet PLL */
+	PLL_AUDIO,	/* Audio PLL */
+	PLL_VIDEO,	/* Video PLL*/
+	PLL_DDR,	/* Dram PLL */
+	PLL_USB,	/* USB PLL, fixed at 480MHZ */
+};
+
+/* clk src for clock root gen */
+enum clk_root_src {
+	OSC_24M_CLK,
+
+	PLL_ARM_MAIN_800M_CLK,
+
+	PLL_SYS_MAIN_480M_CLK,
+	PLL_SYS_MAIN_240M_CLK,
+	PLL_SYS_MAIN_120M_CLK,
+	PLL_SYS_PFD0_392M_CLK,
+	PLL_SYS_PFD0_196M_CLK,
+	PLL_SYS_PFD1_332M_CLK,
+	PLL_SYS_PFD1_166M_CLK,
+	PLL_SYS_PFD2_270M_CLK,
+	PLL_SYS_PFD2_135M_CLK,
+	PLL_SYS_PFD3_CLK,
+	PLL_SYS_PFD4_CLK,
+	PLL_SYS_PFD5_CLK,
+	PLL_SYS_PFD6_CLK,
+	PLL_SYS_PFD7_CLK,
+
+	PLL_ENET_MAIN_500M_CLK,
+	PLL_ENET_MAIN_250M_CLK,
+	PLL_ENET_MAIN_125M_CLK,
+	PLL_ENET_MAIN_100M_CLK,
+	PLL_ENET_MAIN_50M_CLK,
+	PLL_ENET_MAIN_40M_CLK,
+	PLL_ENET_MAIN_25M_CLK,
+
+	PLL_DRAM_MAIN_1066M_CLK,
+	PLL_DRAM_MAIN_533M_CLK,
+
+	PLL_AUDIO_MAIN_CLK,
+	PLL_VIDEO_MAIN_CLK,
+
+	PLL_USB_MAIN_480M_CLK,		/* fixed at 480MHZ */
+
+	EXT_CLK_1,
+	EXT_CLK_2,
+	EXT_CLK_3,
+	EXT_CLK_4,
+
+	REF_1M_CLK,
+	OSC_32K_CLK,
+};
+
+/*
+ * Clock root index
+ */
+enum clk_root_index {
+	ARM_A7_CLK_ROOT = 0,
+	ARM_M4_CLK_ROOT = 1,
+	ARM_M0_CLK_ROOT = 2,
+	MAIN_AXI_CLK_ROOT = 16,
+	DISP_AXI_CLK_ROOT = 17,
+	ENET_AXI_CLK_ROOT = 18,
+	NAND_USDHC_BUS_CLK_ROOT = 19,
+	AHB_CLK_ROOT = 32,
+	DRAM_PHYM_CLK_ROOT = 48,
+	DRAM_CLK_ROOT = 49,
+	DRAM_PHYM_ALT_CLK_ROOT = 64,
+	DRAM_ALT_CLK_ROOT = 65,
+	USB_HSIC_CLK_ROOT = 66,
+	PCIE_CTRL_CLK_ROOT = 67,
+	PCIE_PHY_CLK_ROOT = 68,
+	EPDC_PIXEL_CLK_ROOT = 69,
+	LCDIF_PIXEL_CLK_ROOT = 70,
+	MIPI_DSI_EXTSER_CLK_ROOT = 71,
+	MIPI_CSI_WARP_CLK_ROOT = 72,
+	MIPI_DPHY_REF_CLK_ROOT = 73,
+	SAI1_CLK_ROOT = 74,
+	SAI2_CLK_ROOT = 75,
+	SAI3_CLK_ROOT = 76,
+	SPDIF_CLK_ROOT = 77,
+	ENET1_REF_CLK_ROOT = 78,
+	ENET1_TIME_CLK_ROOT = 79,
+	ENET2_REF_CLK_ROOT = 80,
+	ENET2_TIME_CLK_ROOT = 81,
+	ENET_PHY_REF_CLK_ROOT = 82,
+	EIM_CLK_ROOT = 83,
+	NAND_CLK_ROOT = 84,
+	QSPI_CLK_ROOT = 85,
+	USDHC1_CLK_ROOT = 86,
+	USDHC2_CLK_ROOT = 87,
+	USDHC3_CLK_ROOT = 88,
+	CAN1_CLK_ROOT = 89,
+	CAN2_CLK_ROOT = 90,
+	I2C1_CLK_ROOT = 91,
+	I2C2_CLK_ROOT = 92,
+	I2C3_CLK_ROOT = 93,
+	I2C4_CLK_ROOT = 94,
+	UART1_CLK_ROOT = 95,
+	UART2_CLK_ROOT = 96,
+	UART3_CLK_ROOT = 97,
+	UART4_CLK_ROOT = 98,
+	UART5_CLK_ROOT = 99,
+	UART6_CLK_ROOT = 100,
+	UART7_CLK_ROOT = 101,
+	ECSPI1_CLK_ROOT = 102,
+	ECSPI2_CLK_ROOT = 103,
+	ECSPI3_CLK_ROOT = 104,
+	ECSPI4_CLK_ROOT = 105,
+	PWM1_CLK_ROOT = 106,
+	PWM2_CLK_ROOT = 107,
+	PWM3_CLK_ROOT = 108,
+	PWM4_CLK_ROOT = 109,
+	FLEXTIMER1_CLK_ROOT = 110,
+	FLEXTIMER2_CLK_ROOT = 111,
+	SIM1_CLK_ROOT = 112,
+	SIM2_CLK_ROOT = 113,
+	GPT1_CLK_ROOT = 114,
+	GPT2_CLK_ROOT = 115,
+	GPT3_CLK_ROOT = 116,
+	GPT4_CLK_ROOT = 117,
+	TRACE_CLK_ROOT = 118,
+	WDOG_CLK_ROOT = 119,
+	CSI_MCLK_CLK_ROOT = 120,
+	AUDIO_MCLK_CLK_ROOT = 121,
+	WRCLK_CLK_ROOT = 122,
+	IPP_DO_CLKO1 = 123,
+	IPP_DO_CLKO2 = 124,
+
+	CLK_ROOT_MAX,
+};
+
+#if (CONFIG_CONS_INDEX == 0)
+#define UART_CLK_ROOT UART1_CLK_ROOT
+#elif (CONFIG_CONS_INDEX == 1)
+#define UART_CLK_ROOT UART2_CLK_ROOT
+#elif (CONFIG_CONS_INDEX == 2)
+#define UART_CLK_ROOT UART3_CLK_ROOT
+#elif (CONFIG_CONS_INDEX == 3)
+#define UART_CLK_ROOT UART4_CLK_ROOT
+#elif (CONFIG_CONS_INDEX == 4)
+#define UART_CLK_ROOT UART5_CLK_ROOT
+#elif (CONFIG_CONS_INDEX == 5)
+#define UART_CLK_ROOT UART6_CLK_ROOT
+#elif (CONFIG_CONS_INDEX == 6)
+#define UART_CLK_ROOT UART7_CLK_ROOT
+#else
+#error "Invalid IMX UART ID for serial console is defined"
+#endif
+
+struct clk_root_setting {
+	enum clk_root_index root;
+	u32 setting;
+};
+
+/*
+ * CCGR mapping
+ */
+enum clk_ccgr_index {
+	CCGR_CPU = 0,
+	CCGR_M4 = 1,
+	CCGR_SIM_MAIN = 4,
+	CCGR_SIM_DISPLAY = 5,
+	CCGR_SIM_ENET = 6,
+	CCGR_SIM_M = 7,
+	CCGR_SIM_S = 8,
+	CCGR_SIM_WAKEUP = 9,
+	CCGR_IPMUX1 = 10,
+	CCGR_IPMUX2 = 11,
+	CCGR_IPMUX3 = 12,
+	CCGR_ROM = 16,
+	CCGR_OCRAM = 17,
+	CCGR_OCRAM_S = 18,
+	CCGR_DRAM = 19,
+	CCGR_RAWNAND = 20,
+	CCGR_QSPI = 21,
+	CCGR_WEIM = 22,
+	CCGR_ADC = 32,
+	CCGR_ANATOP = 33,
+	CCGR_SCTR = 34,
+	CCGR_OCOTP = 35,
+	CCGR_CAAM = 36,
+	CCGR_SNVS = 37,
+	CCGR_RDC = 38,
+	CCGR_MU = 39,
+	CCGR_HS = 40,
+	CCGR_DVFS = 41,
+	CCGR_QOS = 42,
+	CCGR_QOS_DISPMIX = 43,
+	CCGR_QOS_MEGAMIX = 44,
+	CCGR_CSU = 45,
+	CCGR_DBGMON = 46,
+	CCGR_DEBUG = 47,
+	CCGR_TRACE = 48,
+	CCGR_SEC_DEBUG = 49,
+	CCGR_SEMA1 = 64,
+	CCGR_SEMA2 = 65,
+	CCGR_PERFMON1 = 68,
+	CCGR_PERFMON2 = 69,
+	CCGR_SDMA = 72,
+	CCGR_CSI = 73,
+	CCGR_EPDC = 74,
+	CCGR_LCDIF = 75,
+	CCGR_PXP = 76,
+	CCGR_PCIE = 96,
+	CCGR_MIPI_CSI = 100,
+	CCGR_MIPI_DSI = 101,
+	CCGR_MIPI_MEM_PHY = 102,
+	CCGR_USB_CTRL = 104,
+	CCGR_USB_HSIC = 105,
+	CCGR_USB_PHY1 = 106,
+	CCGR_USB_PHY2 = 107,
+	CCGR_USDHC1 = 108,
+	CCGR_USDHC2 = 109,
+	CCGR_USDHC3 = 110,
+	CCGR_ENET1 = 112,
+	CCGR_ENET2 = 113,
+	CCGR_CAN1 = 116,
+	CCGR_CAN2 = 117,
+	CCGR_ECSPI1 = 120,
+	CCGR_ECSPI2 = 121,
+	CCGR_ECSPI3 = 122,
+	CCGR_ECSPI4 = 123,
+	CCGR_GPT1 = 124,
+	CCGR_GPT2 = 125,
+	CCGR_GPT3 = 126,
+	CCGR_GPT4 = 127,
+	CCGR_FTM1 = 128,
+	CCGR_FTM2 = 129,
+	CCGR_PWM1 = 132,
+	CCGR_PWM2 = 133,
+	CCGR_PWM3 = 134,
+	CCGR_PWM4 = 135,
+	CCGR_I2C1 = 136,
+	CCGR_I2C2 = 137,
+	CCGR_I2C3 = 138,
+	CCGR_I2C4 = 139,
+	CCGR_SAI1 = 140,
+	CCGR_SAI2 = 141,
+	CCGR_SAI3 = 142,
+	CCGR_SIM1 = 144,
+	CCGR_SIM2 = 145,
+	CCGR_UART1 = 148,
+	CCGR_UART2 = 149,
+	CCGR_UART3 = 150,
+	CCGR_UART4 = 151,
+	CCGR_UART5 = 152,
+	CCGR_UART6 = 153,
+	CCGR_UART7 = 154,
+	CCGR_WDOG1 = 156,
+	CCGR_WDOG2 = 157,
+	CCGR_WDOG3 = 158,
+	CCGR_WDOG4 = 159,
+	CCGR_GPIO1 = 160,
+	CCGR_GPIO2 = 161,
+	CCGR_GPIO3 = 162,
+	CCGR_GPIO4 = 163,
+	CCGR_GPIO5 = 164,
+	CCGR_GPIO6 = 165,
+	CCGR_GPIO7 = 166,
+	CCGR_IOMUX = 168,
+	CCGR_IOMUX_LPSR = 169,
+	CCGR_KPP = 170,
+
+	CCGR_SKIP,
+	CCGR_MAX,
+};
+
+/* Clock root channel */
+enum clk_root_type {
+	CCM_CORE_CHANNEL,
+	CCM_BUS_CHANNEL,
+	CCM_AHB_CHANNEL,
+	CCM_DRAM_PHYM_CHANNEL,
+	CCM_DRAM_CHANNEL,
+	CCM_IP_CHANNEL,
+};
+
+#include <asm/arch/clock_slice.h>
+
+/*
+ * entry: the clock root index
+ * type: ccm channel
+ * src_mux: each entry corresponding to the clock src, detailed info in CCM RM
+ */
+struct clk_root_map {
+	enum clk_root_index entry;
+	enum clk_root_type type;
+	uint8_t src_mux[8];
+};
+
+enum enet_freq {
+	ENET_25MHZ,
+	ENET_50MHZ,
+	ENET_125MHZ,
+};
+
+u32 get_root_clk(enum clk_root_index clock_id);
+u32 mxc_get_clock(enum mxc_clock clk);
+u32 imx_get_uartclk(void);
+u32 imx_get_fecclk(void);
+void clock_init(void);
+#ifdef CONFIG_SYS_I2C_MXC
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
+#endif
+#ifdef CONFIG_FEC_MXC
+int set_clk_enet(enum enet_freq type);
+#endif
+int set_clk_qspi(void);
+int set_clk_nand(void);
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable);
+#endif
+void enable_usboh3_clk(unsigned char enable);
+#ifdef CONFIG_IMX_HAB
+void hab_caam_clock_enable(unsigned char enable);
+#endif
+void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq);
+void enable_thermal_clk(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/clock_slice.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/clock_slice.h
new file mode 100644
index 000000000..9a7c1f823
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/clock_slice.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Author:
+ *	Peng Fan <Peng.Fan@freescale.com>
+ */
+
+#ifndef _ASM_ARCH_CLOCK_SLICE_H
+#define _ASM_ARCH_CLOCK_SLICE_H
+
+enum root_pre_div {
+	CLK_ROOT_PRE_DIV1 = 0,
+	CLK_ROOT_PRE_DIV2,
+	CLK_ROOT_PRE_DIV3,
+	CLK_ROOT_PRE_DIV4,
+	CLK_ROOT_PRE_DIV5,
+	CLK_ROOT_PRE_DIV6,
+	CLK_ROOT_PRE_DIV7,
+	CLK_ROOT_PRE_DIV8,
+};
+
+enum root_post_div {
+	CLK_ROOT_POST_DIV1 = 0,
+	CLK_ROOT_POST_DIV2,
+	CLK_ROOT_POST_DIV3,
+	CLK_ROOT_POST_DIV4,
+	CLK_ROOT_POST_DIV5,
+	CLK_ROOT_POST_DIV6,
+	CLK_ROOT_POST_DIV7,
+	CLK_ROOT_POST_DIV8,
+	CLK_ROOT_POST_DIV9,
+	CLK_ROOT_POST_DIV10,
+	CLK_ROOT_POST_DIV11,
+	CLK_ROOT_POST_DIV12,
+	CLK_ROOT_POST_DIV13,
+	CLK_ROOT_POST_DIV14,
+	CLK_ROOT_POST_DIV15,
+	CLK_ROOT_POST_DIV16,
+	CLK_ROOT_POST_DIV17,
+	CLK_ROOT_POST_DIV18,
+	CLK_ROOT_POST_DIV19,
+	CLK_ROOT_POST_DIV20,
+	CLK_ROOT_POST_DIV21,
+	CLK_ROOT_POST_DIV22,
+	CLK_ROOT_POST_DIV23,
+	CLK_ROOT_POST_DIV24,
+	CLK_ROOT_POST_DIV25,
+	CLK_ROOT_POST_DIV26,
+	CLK_ROOT_POST_DIV27,
+	CLK_ROOT_POST_DIV28,
+	CLK_ROOT_POST_DIV29,
+	CLK_ROOT_POST_DIV30,
+	CLK_ROOT_POST_DIV31,
+	CLK_ROOT_POST_DIV32,
+	CLK_ROOT_POST_DIV33,
+	CLK_ROOT_POST_DIV34,
+	CLK_ROOT_POST_DIV35,
+	CLK_ROOT_POST_DIV36,
+	CLK_ROOT_POST_DIV37,
+	CLK_ROOT_POST_DIV38,
+	CLK_ROOT_POST_DIV39,
+	CLK_ROOT_POST_DIV40,
+	CLK_ROOT_POST_DIV41,
+	CLK_ROOT_POST_DIV42,
+	CLK_ROOT_POST_DIV43,
+	CLK_ROOT_POST_DIV44,
+	CLK_ROOT_POST_DIV45,
+	CLK_ROOT_POST_DIV46,
+	CLK_ROOT_POST_DIV47,
+	CLK_ROOT_POST_DIV48,
+	CLK_ROOT_POST_DIV49,
+	CLK_ROOT_POST_DIV50,
+	CLK_ROOT_POST_DIV51,
+	CLK_ROOT_POST_DIV52,
+	CLK_ROOT_POST_DIV53,
+	CLK_ROOT_POST_DIV54,
+	CLK_ROOT_POST_DIV55,
+	CLK_ROOT_POST_DIV56,
+	CLK_ROOT_POST_DIV57,
+	CLK_ROOT_POST_DIV58,
+	CLK_ROOT_POST_DIV59,
+	CLK_ROOT_POST_DIV60,
+	CLK_ROOT_POST_DIV61,
+	CLK_ROOT_POST_DIV62,
+	CLK_ROOT_POST_DIV63,
+	CLK_ROOT_POST_DIV64,
+};
+
+enum root_auto_div {
+	CLK_ROOT_AUTO_DIV1 = 0,
+	CLK_ROOT_AUTO_DIV2,
+	CLK_ROOT_AUTO_DIV4,
+	CLK_ROOT_AUTO_DIV8,
+	CLK_ROOT_AUTO_DIV16,
+};
+
+int clock_set_src(enum clk_root_index clock_id, enum clk_root_src clock_src);
+int clock_get_src(enum clk_root_index clock_id, enum clk_root_src *p_clock_src);
+int clock_set_prediv(enum clk_root_index clock_id, enum root_pre_div pre_div);
+int clock_get_prediv(enum clk_root_index clock_id, enum root_pre_div *pre_div);
+int clock_set_postdiv(enum clk_root_index clock_id, enum root_post_div div);
+int clock_get_postdiv(enum clk_root_index clock_id, enum root_post_div *div);
+int clock_set_autopostdiv(enum clk_root_index clock_id, enum root_auto_div div,
+			  int auto_en);
+int clock_get_autopostdiv(enum clk_root_index clock_id, enum root_auto_div *div,
+			  int *auto_en);
+int clock_get_target_val(enum clk_root_index clock_id, u32 *val);
+int clock_set_target_val(enum clk_root_index clock_id, u32 val);
+int clock_root_cfg(enum clk_root_index clock_id, enum root_pre_div pre_div,
+		   enum root_post_div post_div, enum clk_root_src clock_src);
+int clock_root_enabled(enum clk_root_index clock_id);
+
+int clock_enable(enum clk_ccgr_index index, bool enable);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/crm_regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/crm_regs.h
new file mode 100644
index 000000000..bfa68a9d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/crm_regs.h
@@ -0,0 +1,2817 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * Author:
+ *	Peng Fan <Peng.Fan@freescale.com>
+ */
+
+#ifndef __ARCH_ARM_MACH_MX7_CCM_REGS_H__
+#define __ARCH_ARM_MACH_MX7_CCM_REGS_H__
+
+#include <asm/arch/imx-regs.h>
+#include <asm/io.h>
+
+#define	CCM_GPR0_OFFSET			0x0
+#define	CCM_OBSERVE0_OFFSET		0x0400
+#define	CCM_SCTRL0_OFFSET		0x0800
+#define	CCM_CCGR0_OFFSET		0x4000
+#define	CCM_ROOT0_TARGET_OFFSET		0x8000
+
+#ifndef __ASSEMBLY__
+
+struct mxc_ccm_ccgr {
+	uint32_t ccgr;
+	uint32_t ccgr_set;
+	uint32_t ccgr_clr;
+	uint32_t ccgr_tog;
+};
+
+struct mxc_ccm_root_slice {
+	uint32_t target_root;
+	uint32_t target_root_set;
+	uint32_t target_root_clr;
+	uint32_t target_root_tog;
+	uint32_t reserved_0[4];
+	uint32_t post;
+	uint32_t post_root_set;
+	uint32_t post_root_clr;
+	uint32_t post_root_tog;
+	uint32_t pre;
+	uint32_t pre_root_set;
+	uint32_t pre_root_clr;
+	uint32_t pre_root_tog;
+	uint32_t reserved_1[12];
+	uint32_t access_ctrl;
+	uint32_t access_ctrl_root_set;
+	uint32_t access_ctrl_root_clr;
+	uint32_t access_ctrl_root_tog;
+};
+
+/** CCM - Peripheral register structure */
+struct mxc_ccm_reg {
+	uint32_t gpr0;
+	uint32_t gpr0_set;
+	uint32_t gpr0_clr;
+	uint32_t gpr0_tog;
+	uint32_t reserved_0[4092];
+	struct mxc_ccm_ccgr ccgr_array[191];	/* offset 0x4000 */
+	uint32_t reserved_1[3332];
+	struct mxc_ccm_root_slice root[125];	/* offset 0x8000 */
+
+};
+
+struct mxc_ccm_anatop_reg {
+	uint32_t ctrl_24m;			/* offset 0x0000 */
+	uint32_t ctrl_24m_set;
+	uint32_t ctrl_24m_clr;
+	uint32_t ctrl_24m_tog;
+	uint32_t rcosc_config0;			/* offset 0x0010 */
+	uint32_t rcosc_config0_set;
+	uint32_t rcosc_config0_clr;
+	uint32_t rcosc_config0_tog;
+	uint32_t rcosc_config1;			/* offset 0x0020 */
+	uint32_t rcosc_config1_set;
+	uint32_t rcosc_config1_clr;
+	uint32_t rcosc_config1_tog;
+	uint32_t rcosc_config2;			/* offset 0x0030 */
+	uint32_t rcosc_config2_set;
+	uint32_t rcosc_config2_clr;
+	uint32_t rcosc_config2_tog;
+	uint8_t reserved_0[16];
+	uint32_t osc_32k;			/* offset 0x0050 */
+	uint32_t osc_32k_set;
+	uint32_t osc_32k_clr;
+	uint32_t osc_32k_tog;
+	uint32_t pll_arm;			/* offset 0x0060 */
+	uint32_t pll_arm_set;
+	uint32_t pll_arm_clr;
+	uint32_t pll_arm_tog;
+	uint32_t pll_ddr;			/* offset 0x0070 */
+	uint32_t pll_ddr_set;
+	uint32_t pll_ddr_clr;
+	uint32_t pll_ddr_tog;
+	uint32_t pll_ddr_ss;			/* offset 0x0080 */
+	uint8_t reserved_1[12];
+	uint32_t pll_ddr_num;			/* offset 0x0090 */
+	uint8_t reserved_2[12];
+	uint32_t pll_ddr_denom;			/* offset 0x00a0 */
+	uint8_t reserved_3[12];
+	uint32_t pll_480;			/* offset 0x00b0 */
+	uint32_t pll_480_set;
+	uint32_t pll_480_clr;
+	uint32_t pll_480_tog;
+	uint32_t pfd_480a;			/* offset 0x00c0 */
+	uint32_t pfd_480a_set;
+	uint32_t pfd_480a_clr;
+	uint32_t pfd_480a_tog;
+	uint32_t pfd_480b;			/* offset 0x00d0 */
+	uint32_t pfd_480b_set;
+	uint32_t pfd_480b_clr;
+	uint32_t pfd_480b_tog;
+	uint32_t pll_enet;			/* offset 0x00e0 */
+	uint32_t pll_enet_set;
+	uint32_t pll_enet_clr;
+	uint32_t pll_enet_tog;
+	uint32_t pll_audio;			/* offset 0x00f0 */
+	uint32_t pll_audio_set;
+	uint32_t pll_audio_clr;
+	uint32_t pll_audio_tog;
+	uint32_t pll_audio_ss;			/* offset 0x0100 */
+	uint8_t reserved_4[12];
+	uint32_t pll_audio_num;			/* offset 0x0110 */
+	uint8_t reserved_5[12];
+	uint32_t pll_audio_denom;		/* offset 0x0120 */
+	uint8_t reserved_6[12];
+	uint32_t pll_video;			/* offset 0x0130 */
+	uint32_t pll_video_set;
+	uint32_t pll_video_clr;
+	uint32_t pll_video_tog;
+	uint32_t pll_video_ss;			/* offset 0x0140 */
+	uint8_t reserved_7[12];
+	uint32_t pll_video_num;			/* offset 0x0150 */
+	uint8_t reserved_8[12];
+	uint32_t pll_video_denom;		/* offset 0x0160 */
+	uint8_t reserved_9[12];
+	uint32_t clk_misc0;			/* offset 0x0170 */
+	uint32_t clk_misc0_set;
+	uint32_t clk_misc0_clr;
+	uint32_t clk_misc0_tog;
+	uint32_t clk_rsvd;			/* offset 0x0180 */
+	uint8_t reserved_10[124];
+	uint32_t reg_1p0a;			/* offset 0x0200 */
+	uint32_t reg_1p0a_set;
+	uint32_t reg_1p0a_clr;
+	uint32_t reg_1p0a_tog;
+	uint32_t reg_1p0d;			/* offsest 0x0210 */
+	uint32_t reg_1p0d_set;
+	uint32_t reg_1p0d_clr;
+	uint32_t reg_1p0d_tog;
+	uint32_t reg_hsic_1p2;			/* offset 0x0220 */
+	uint32_t reg_hsic_1p2_set;
+	uint32_t reg_hsic_1p2_clr;
+	uint32_t reg_hsic_1p2_tog;
+	uint32_t reg_lpsr_1p0;			/* offset 0x0230 */
+	uint32_t reg_lpsr_1p0_set;
+	uint32_t reg_lpsr_1p0_clr;
+	uint32_t reg_lpsr_1p0_tog;
+	uint32_t reg_3p0;			/* offset 0x0240 */
+	uint32_t reg_3p0_set;
+	uint32_t reg_3p0_clr;
+	uint32_t reg_3p0_tog;
+	uint32_t reg_snvs;			/* offset 0x0250 */
+	uint32_t reg_snvs_set;
+	uint32_t reg_snvs_clr;
+	uint32_t reg_snvs_tog;
+	uint32_t analog_debug_misc0;		/* offset 0x0260 */
+	uint32_t analog_debug_misc0_set;
+	uint32_t analog_debug_misc0_clr;
+	uint32_t analog_debug_misc0_tog;
+	uint32_t ref;				/* offset 0x0270 */
+	uint32_t ref_set;
+	uint32_t ref_clr;
+	uint32_t ref_tog;
+	uint8_t reserved_11[128];
+	uint32_t tempsense0;			/* offset 0x0300 */
+	uint32_t tempsense0_set;
+	uint32_t tempsense0_clr;
+	uint32_t tempsense0_tog;
+	uint32_t tempsense1;			/* offset 0x0310 */
+	uint32_t tempsense1_set;
+	uint32_t tempsense1_clr;
+	uint32_t tempsense1_tog;
+	uint32_t tempsense_trim;		/* offset 0x0320 */
+	uint32_t tempsense_trim_set;
+	uint32_t tempsense_trim_clr;
+	uint32_t tempsense_trim_tog;
+	uint32_t lowpwr_ctrl;			/* offset 0x0330 */
+	uint32_t lowpwr_ctrl_set;
+	uint32_t lowpwr_ctrl_clr;
+	uint32_t lowpwr_ctrl_tog;
+	uint32_t snvs_tamper_offset_ctrl;	/* offset 0x0340 */
+	uint32_t snvs_tamper_offset_ctrl_set;
+	uint32_t snvs_tamper_offset_ctrl_clr;
+	uint32_t snvs_tamper_offset_ctrl_tog;
+	uint32_t snvs_tamper_pull_ctrl;		/* offset 0x0350 */
+	uint32_t snvs_tamper_pull_ctrl_set;
+	uint32_t snvs_tamper_pull_ctrl_clr;
+	uint32_t snvs_tamper_pull_ctrl_tog;
+	uint32_t snvs_test;			/* offset 0x0360 */
+	uint32_t snvs_test_set;
+	uint32_t snvs_test_clr;
+	uint32_t snvs_test_tog;
+	uint32_t snvs_tamper_trim_ctrl;		/* offset 0x0370 */
+	uint32_t snvs_tamper_trim_ctrl_set;
+	uint32_t snvs_tamper_trim_ctrl_ctrl;
+	uint32_t snvs_tamper_trim_ctrl_tog;
+	uint32_t snvs_misc_ctrl;		/* offset 0x0380 */
+	uint32_t snvs_misc_ctrl_set;
+	uint32_t snvs_misc_ctrl_clr;
+	uint32_t snvs_misc_ctrl_tog;
+	uint8_t reserved_12[112];
+	uint32_t misc;				/* offset 0x0400 */
+	uint8_t reserved_13[252];
+	uint32_t adc0;				/* offset 0x0500 */
+	uint8_t reserved_14[12];
+	uint32_t adc1;				/* offset 0x0510 */
+	uint8_t reserved_15[748];
+	uint32_t digprog;			/* offset 0x0800 */
+};
+#endif
+
+#define ANADIG_CLK_MISC0_PFD_480_AUTOGATE_EN_MASK	(0x01 << 17)
+
+#define ANADIG_PLL_LOCK					0x80000000
+
+#define ANADIG_PLL_ARM_PWDN_MASK			(0x01 << 12)
+#define ANADIG_PLL_480_PWDN_MASK			(0x01 << 12)
+#define ANADIG_PLL_DDR_PWDN_MASK			(0x01 << 20)
+#define ANADIG_PLL_ENET_PWDN_MASK			(0x01 << 5)
+#define ANADIG_PLL_VIDEO_PWDN_MASK			(0x01 << 12)
+
+
+#define ANATOP_PFD480B_PFD4_FRAC_MASK			0x0000003f
+#define ANATOP_PFD480B_PFD4_FRAC_320M_VAL		0x0000001B
+#define ANATOP_PFD480B_PFD4_FRAC_392M_VAL		0x00000016
+#define ANATOP_PFD480B_PFD4_FRAC_432M_VAL		0x00000014
+
+/* PLL_ARM Bit Fields */
+#define CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK		0x7F
+#define CCM_ANALOG_PLL_ARM_DIV_SELECT_SHIFT		0
+#define CCM_ANALOG_PLL_ARM_HALF_LF_MASK			0x80
+#define CCM_ANALOG_PLL_ARM_HALF_LF_SHIFT		7
+#define CCM_ANALOG_PLL_ARM_DOUBLE_LF_MASK		0x100
+#define CCM_ANALOG_PLL_ARM_DOUBLE_LF_SHIFT		8
+#define CCM_ANALOG_PLL_ARM_HALF_CP_MASK			0x200
+#define CCM_ANALOG_PLL_ARM_HALF_CP_SHIFT		9
+#define CCM_ANALOG_PLL_ARM_DOUBLE_CP_MASK		0x400
+#define CCM_ANALOG_PLL_ARM_DOUBLE_CP_SHIFT		10
+#define CCM_ANALOG_PLL_ARM_HOLD_RING_OFF_MASK		0x800
+#define CCM_ANALOG_PLL_ARM_HOLD_RING_OFF_SHIFT		11
+#define CCM_ANALOG_PLL_ARM_POWERDOWN_MASK		0x1000
+#define CCM_ANALOG_PLL_ARM_POWERDOWN_SHIFT		12
+#define CCM_ANALOG_PLL_ARM_ENABLE_CLK_MASK		0x2000
+#define CCM_ANALOG_PLL_ARM_ENABLE_CLK_SHIFT		13
+#define CCM_ANALOG_PLL_ARM_BYPASS_CLK_SRC_MASK		0xC000
+#define CCM_ANALOG_PLL_ARM_BYPASS_CLK_SRC_SHIFT		14
+#define CCM_ANALOG_PLL_ARM_BYPASS_MASK			0x10000
+#define CCM_ANALOG_PLL_ARM_BYPASS_SHIFT			16
+#define CCM_ANALOG_PLL_ARM_LVDS_SEL_MASK		0x20000
+#define CCM_ANALOG_PLL_ARM_LVDS_SEL_SHIFT		17
+#define CCM_ANALOG_PLL_ARM_LVDS_24MHZ_SEL_MASK		0x40000
+#define CCM_ANALOG_PLL_ARM_LVDS_24MHZ_SEL_SHIFT		18
+#define CCM_ANALOG_PLL_ARM_PLL_SEL_MASK			0x80000
+#define CCM_ANALOG_PLL_ARM_PLL_SEL_SHIFT		19
+#define CCM_ANALOG_PLL_ARM_PLL_ARM_OVERRIDE_MASK	0x100000
+#define CCM_ANALOG_PLL_ARM_PLL_ARM_OVERRIDE_SHIFT	20
+#define CCM_ANALOG_PLL_ARM_RSVD0_MASK			0x7FE00000
+#define CCM_ANALOG_PLL_ARM_RSVD0_SHIFT			21
+#define CCM_ANALOG_PLL_ARM_LOCK_MASK			0x80000000
+#define CCM_ANALOG_PLL_ARM_LOCK_SHIFT			31
+
+/* PLL_DDR Bit Fields */
+#define CCM_ANALOG_PLL_DDR_DIV_SELECT_MASK		0x7F
+#define CCM_ANALOG_PLL_DDR_DIV_SELECT_SHIFT		0
+#define CCM_ANALOG_PLL_DDR_HALF_LF_MASK			0x80
+#define CCM_ANALOG_PLL_DDR_HALF_LF_SHIFT		7
+#define CCM_ANALOG_PLL_DDR_DOUBLE_LF_MASK		0x100
+#define CCM_ANALOG_PLL_DDR_DOUBLE_LF_SHIFT		8
+#define CCM_ANALOG_PLL_DDR_HALF_CP_MASK			0x200
+#define CCM_ANALOG_PLL_DDR_HALF_CP_SHIFT		9
+#define CCM_ANALOG_PLL_DDR_DOUBLE_CP_MASK		0x400
+#define CCM_ANALOG_PLL_DDR_DOUBLE_CP_SHIFT		10
+#define CCM_ANALOG_PLL_DDR_HOLD_RING_OFF_MASK		0x800
+#define CCM_ANALOG_PLL_DDR_HOLD_RING_OFF_SHIFT		11
+#define CCM_ANALOG_PLL_DDR_DIV2_ENABLE_CLK_MASK		0x1000
+#define CCM_ANALOG_PLL_DDR_DIV2_ENABLE_CLK_SHIFT	12
+#define CCM_ANALOG_PLL_DDR_ENABLE_CLK_MASK		0x2000
+#define CCM_ANALOG_PLL_DDR_ENABLE_CLK_SHIFT		13
+#define CCM_ANALOG_PLL_DDR_BYPASS_CLK_SRC_MASK		0xC000
+#define CCM_ANALOG_PLL_DDR_BYPASS_CLK_SRC_SHIFT		14
+#define CCM_ANALOG_PLL_DDR_BYPASS_MASK			0x10000
+#define CCM_ANALOG_PLL_DDR_BYPASS_SHIFT			16
+#define CCM_ANALOG_PLL_DDR_DITHER_ENABLE_MASK		0x20000
+#define CCM_ANALOG_PLL_DDR_DITHER_ENABLE_SHIFT		17
+#define CCM_ANALOG_PLL_DDR_PFD_OFFSET_EN_MASK		0x40000
+#define CCM_ANALOG_PLL_DDR_PFD_OFFSET_EN_SHIFT		18
+#define CCM_ANALOG_PLL_DDR_PLL_DDR_OVERRIDE_MASK	0x80000
+#define CCM_ANALOG_PLL_DDR_PLL_DDR_OVERRIDE_SHIFT	19
+#define CCM_ANALOG_PLL_DDR_POWERDOWN_MASK		0x100000
+#define CCM_ANALOG_PLL_DDR_POWERDOWN_SHIFT		20
+#define CCM_ANALOG_PLL_DDR_TEST_DIV_SELECT_MASK		0x600000
+#define CCM_ANALOG_PLL_DDR_TEST_DIV_SELECT_SHIFT	21
+#define CCM_ANALOG_PLL_DDR_RSVD1_MASK			0x7F800000
+#define CCM_ANALOG_PLL_DDR_RSVD1_SHIFT			23
+#define CCM_ANALOG_PLL_DDR_LOCK_MASK			0x80000000
+#define CCM_ANALOG_PLL_DDR_LOCK_SHIFT			31
+
+/* PLL_480 Bit Fields */
+#define CCM_ANALOG_PLL_480_DIV_SELECT_MASK		0x1
+#define CCM_ANALOG_PLL_480_DIV_SELECT_SHIFT		0
+#define CCM_ANALOG_PLL_480_RSVD0_MASK			0xE
+#define CCM_ANALOG_PLL_480_RSVD0_SHIFT			1
+#define CCM_ANALOG_PLL_480_MAIN_DIV1_CLKGATE_MASK	0x10
+#define CCM_ANALOG_PLL_480_MAIN_DIV1_CLKGATE_SHIFT	4
+#define CCM_ANALOG_PLL_480_MAIN_DIV2_CLKGATE_MASK	0x20
+#define CCM_ANALOG_PLL_480_MAIN_DIV2_CLKGATE_SHIFT	5
+#define CCM_ANALOG_PLL_480_MAIN_DIV4_CLKGATE_MASK	0x40
+#define CCM_ANALOG_PLL_480_MAIN_DIV4_CLKGATE_SHIFT	6
+#define CCM_ANALOG_PLL_480_HALF_LF_MASK			0x80
+#define CCM_ANALOG_PLL_480_HALF_LF_SHIFT		7
+#define CCM_ANALOG_PLL_480_DOUBLE_LF_MASK		0x100
+#define CCM_ANALOG_PLL_480_DOUBLE_LF_SHIFT		8
+#define CCM_ANALOG_PLL_480_HALF_CP_MASK			0x200
+#define CCM_ANALOG_PLL_480_HALF_CP_SHIFT		9
+#define CCM_ANALOG_PLL_480_DOUBLE_CP_MASK		0x400
+#define CCM_ANALOG_PLL_480_DOUBLE_CP_SHIFT		10
+#define CCM_ANALOG_PLL_480_HOLD_RING_OFF_MASK		0x800
+#define CCM_ANALOG_PLL_480_HOLD_RING_OFF_SHIFT		11
+#define CCM_ANALOG_PLL_480_POWERDOWN_MASK		0x1000
+#define CCM_ANALOG_PLL_480_POWERDOWN_SHIFT		12
+#define CCM_ANALOG_PLL_480_ENABLE_CLK_MASK		0x2000
+#define CCM_ANALOG_PLL_480_ENABLE_CLK_SHIFT		13
+#define CCM_ANALOG_PLL_480_BYPASS_CLK_SRC_MASK		0xC000
+#define CCM_ANALOG_PLL_480_BYPASS_CLK_SRC_SHIFT		14
+#define CCM_ANALOG_PLL_480_BYPASS_MASK			0x10000
+#define CCM_ANALOG_PLL_480_BYPASS_SHIFT			16
+#define CCM_ANALOG_PLL_480_PLL_480_OVERRIDE_MASK	0x20000
+#define CCM_ANALOG_PLL_480_PLL_480_OVERRIDE_SHIFT	17
+#define CCM_ANALOG_PLL_480_PFD0_OVERRIDE_MASK		0x40000
+#define CCM_ANALOG_PLL_480_PFD0_OVERRIDE_SHIFT		18
+#define CCM_ANALOG_PLL_480_PFD1_OVERRIDE_MASK		0x80000
+#define CCM_ANALOG_PLL_480_PFD1_OVERRIDE_SHIFT		19
+#define CCM_ANALOG_PLL_480_PFD2_OVERRIDE_MASK		0x100000
+#define CCM_ANALOG_PLL_480_PFD2_OVERRIDE_SHIFT		20
+#define CCM_ANALOG_PLL_480_PFD3_OVERRIDE_MASK		0x200000
+#define CCM_ANALOG_PLL_480_PFD3_OVERRIDE_SHIFT		21
+#define CCM_ANALOG_PLL_480_PFD4_OVERRIDE_MASK		0x400000
+#define CCM_ANALOG_PLL_480_PFD4_OVERRIDE_SHIFT		22
+#define CCM_ANALOG_PLL_480_PFD5_OVERRIDE_MASK		0x800000
+#define CCM_ANALOG_PLL_480_PFD5_OVERRIDE_SHIFT		23
+#define CCM_ANALOG_PLL_480_PFD6_OVERRIDE_MASK		0x1000000
+#define CCM_ANALOG_PLL_480_PFD6_OVERRIDE_SHIFT		24
+#define CCM_ANALOG_PLL_480_PFD7_OVERRIDE_MASK		0x2000000
+#define CCM_ANALOG_PLL_480_PFD7_OVERRIDE_SHIFT		25
+#define CCM_ANALOG_PLL_480_PFD0_DIV2_CLKGATE_MASK	0x4000000
+#define CCM_ANALOG_PLL_480_PFD0_DIV2_CLKGATE_SHIFT	26
+#define CCM_ANALOG_PLL_480_PFD1_DIV2_CLKGATE_MASK	0x8000000
+#define CCM_ANALOG_PLL_480_PFD1_DIV2_CLKGATE_SHIFT	27
+#define CCM_ANALOG_PLL_480_PFD2_DIV2_CLKGATE_MASK	0x10000000
+#define CCM_ANALOG_PLL_480_PFD2_DIV2_CLKGATE_SHIFT	28
+#define CCM_ANALOG_PLL_480_RSVD1_MASK			0x60000000
+#define CCM_ANALOG_PLL_480_RSVD1_SHIFT			29
+#define CCM_ANALOG_PLL_480_LOCK_MASK			0x80000000
+#define CCM_ANALOG_PLL_480_LOCK_SHIFT			31
+
+/* PFD_480A Bit Fields */
+#define CCM_ANALOG_PFD_480A_PFD0_FRAC_MASK		0x3F
+#define CCM_ANALOG_PFD_480A_PFD0_FRAC_SHIFT		0
+#define CCM_ANALOG_PFD_480A_PFD0_STABLE_MASK		0x40
+#define CCM_ANALOG_PFD_480A_PFD0_STABLE_SHIFT		6
+#define CCM_ANALOG_PFD_480A_PFD0_DIV1_CLKGATE_MASK	0x80
+#define CCM_ANALOG_PFD_480A_PFD0_DIV1_CLKGATE_SHIFT	7
+#define CCM_ANALOG_PFD_480A_PFD1_FRAC_MASK		0x3F00
+#define CCM_ANALOG_PFD_480A_PFD1_FRAC_SHIFT		8
+#define CCM_ANALOG_PFD_480A_PFD1_STABLE_MASK		0x4000
+#define CCM_ANALOG_PFD_480A_PFD1_STABLE_SHIFT		14
+#define CCM_ANALOG_PFD_480A_PFD1_DIV1_CLKGATE_MASK	0x8000
+#define CCM_ANALOG_PFD_480A_PFD1_DIV1_CLKGATE_SHIFT	15
+#define CCM_ANALOG_PFD_480A_PFD2_FRAC_MASK		0x3F0000
+#define CCM_ANALOG_PFD_480A_PFD2_FRAC_SHIFT		16
+#define CCM_ANALOG_PFD_480A_PFD2_STABLE_MASK		0x400000
+#define CCM_ANALOG_PFD_480A_PFD2_STABLE_SHIFT		22
+#define CCM_ANALOG_PFD_480A_PFD2_DIV1_CLKGATE_MASK	0x800000
+#define CCM_ANALOG_PFD_480A_PFD2_DIV1_CLKGATE_SHIFT	23
+#define CCM_ANALOG_PFD_480A_PFD3_FRAC_MASK		0x3F000000
+#define CCM_ANALOG_PFD_480A_PFD3_FRAC_SHIFT		24
+#define CCM_ANALOG_PFD_480A_PFD3_STABLE_MASK		0x40000000
+#define CCM_ANALOG_PFD_480A_PFD3_STABLE_SHIFT		30
+#define CCM_ANALOG_PFD_480A_PFD3_DIV1_CLKGATE_MASK	0x80000000
+#define CCM_ANALOG_PFD_480A_PFD3_DIV1_CLKGATE_SHIFT	31
+/* PFD_480B Bit Fields */
+#define CCM_ANALOG_PFD_480B_PFD4_FRAC_MASK		0x3F
+#define CCM_ANALOG_PFD_480B_PFD4_FRAC_SHIFT		0
+#define CCM_ANALOG_PFD_480B_PFD4_STABLE_MASK		0x40
+#define CCM_ANALOG_PFD_480B_PFD4_STABLE_SHIFT		6
+#define CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_MASK	0x80
+#define CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_SHIFT	7
+#define CCM_ANALOG_PFD_480B_PFD5_FRAC_MASK		0x3F00
+#define CCM_ANALOG_PFD_480B_PFD5_FRAC_SHIFT		8
+#define CCM_ANALOG_PFD_480B_PFD5_STABLE_MASK		0x4000
+#define CCM_ANALOG_PFD_480B_PFD5_STABLE_SHIFT		14
+#define CCM_ANALOG_PFD_480B_PFD5_DIV1_CLKGATE_MASK	0x8000
+#define CCM_ANALOG_PFD_480B_PFD5_DIV1_CLKGATE_SHIFT	15
+#define CCM_ANALOG_PFD_480B_PFD6_FRAC_MASK		0x3F0000
+#define CCM_ANALOG_PFD_480B_PFD6_FRAC_SHIFT		16
+#define CCM_ANALOG_PFD_480B_PFD6_STABLE_MASK		0x400000
+#define CCM_ANALOG_PFD_480B_PFD6_STABLE_SHIFT		22
+#define CCM_ANALOG_PFD_480B_PFD6_DIV1_CLKGATE_MASK	0x800000
+#define CCM_ANALOG_PFD_480B_PFD6_DIV1_CLKGATE_SHIFT	23
+#define CCM_ANALOG_PFD_480B_PFD7_FRAC_MASK		0x3F000000
+#define CCM_ANALOG_PFD_480B_PFD7_FRAC_SHIFT		24
+#define CCM_ANALOG_PFD_480B_PFD7_STABLE_MASK		0x40000000
+#define CCM_ANALOG_PFD_480B_PFD7_STABLE_SHIFT		30
+#define CCM_ANALOG_PFD_480B_PFD7_DIV1_CLKGATE_MASK	0x80000000
+#define CCM_ANALOG_PFD_480B_PFD7_DIV1_CLKGATE_SHIFT	31
+
+/* PLL_ENET Bit Fields */
+#define CCM_ANALOG_PLL_ENET_HALF_LF_MASK		0x1
+#define CCM_ANALOG_PLL_ENET_HALF_LF_SHIFT		0
+#define CCM_ANALOG_PLL_ENET_DOUBLE_LF_MASK		0x2
+#define CCM_ANALOG_PLL_ENET_DOUBLE_LF_SHIFT		1
+#define CCM_ANALOG_PLL_ENET_HALF_CP_MASK		0x4
+#define CCM_ANALOG_PLL_ENET_HALF_CP_SHIFT		2
+#define CCM_ANALOG_PLL_ENET_DOUBLE_CP_MASK		0x8
+#define CCM_ANALOG_PLL_ENET_DOUBLE_CP_SHIFT		3
+#define CCM_ANALOG_PLL_ENET_HOLD_RING_OFF_MASK		0x10
+#define CCM_ANALOG_PLL_ENET_HOLD_RING_OFF_SHIFT		4
+#define CCM_ANALOG_PLL_ENET_POWERDOWN_MASK		0x20
+#define CCM_ANALOG_PLL_ENET_POWERDOWN_SHIFT		5
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_MASK	0x40
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_SHIFT	6
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_MASK	0x80
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_SHIFT	7
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_MASK	0x100
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_SHIFT	8
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_MASK	0x200
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_SHIFT	9
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_MASK	0x400
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_SHIFT	10
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_MASK	0x800
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_SHIFT	11
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_MASK	0x1000
+#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_SHIFT	12
+#define CCM_ANALOG_PLL_ENET_PLL_ENET_OVERRIDE_MASK	0x2000
+#define CCM_ANALOG_PLL_ENET_PLL_ENET_OVERRIDE_SHIFT	13
+#define CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_MASK		0xC000
+#define CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_SHIFT	14
+#define CCM_ANALOG_PLL_ENET_BYPASS_MASK			0x10000
+#define CCM_ANALOG_PLL_ENET_BYPASS_SHIFT		16
+#define CCM_ANALOG_PLL_ENET_DITHER_ENABLE_MASK		0x20000
+#define CCM_ANALOG_PLL_ENET_DITHER_ENABLE_SHIFT		17
+#define CCM_ANALOG_PLL_ENET_PFD_OFFSET_EN_MASK		0x40000
+#define CCM_ANALOG_PLL_ENET_PFD_OFFSET_EN_SHIFT		18
+#define CCM_ANALOG_PLL_ENET_RSVD1_MASK			0x7FF80000
+#define CCM_ANALOG_PLL_ENET_RSVD1_SHIFT			19
+#define CCM_ANALOG_PLL_ENET_LOCK_MASK			0x80000000
+#define CCM_ANALOG_PLL_ENET_LOCK_SHIFT			31
+
+/* PLL_AUDIO Bit Fields */
+#define CCM_ANALOG_PLL_AUDIO_DIV_SELECT_MASK     0x7Fu
+#define CCM_ANALOG_PLL_AUDIO_DIV_SELECT_SHIFT    0
+#define CCM_ANALOG_PLL_AUDIO_DIV_SELECT(x)       (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_AUDIO_HALF_LF_MASK        0x80u
+#define CCM_ANALOG_PLL_AUDIO_HALF_LF_SHIFT       7
+#define CCM_ANALOG_PLL_AUDIO_DOUBLE_LF_MASK      0x100u
+#define CCM_ANALOG_PLL_AUDIO_DOUBLE_LF_SHIFT     8
+#define CCM_ANALOG_PLL_AUDIO_HALF_CP_MASK        0x200u
+#define CCM_ANALOG_PLL_AUDIO_HALF_CP_SHIFT       9
+#define CCM_ANALOG_PLL_AUDIO_DOUBLE_CP_MASK      0x400u
+#define CCM_ANALOG_PLL_AUDIO_DOUBLE_CP_SHIFT     10
+#define CCM_ANALOG_PLL_AUDIO_HOLD_RING_OFF_MASK  0x800u
+#define CCM_ANALOG_PLL_AUDIO_HOLD_RING_OFF_SHIFT 11
+#define CCM_ANALOG_PLL_AUDIO_POWERDOWN_MASK      0x1000u
+#define CCM_ANALOG_PLL_AUDIO_POWERDOWN_SHIFT     12
+#define CCM_ANALOG_PLL_AUDIO_ENABLE_CLK_MASK     0x2000u
+#define CCM_ANALOG_PLL_AUDIO_ENABLE_CLK_SHIFT    13
+#define CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_MASK 0xC000u
+#define CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_SHIFT 14
+#define CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC(x)   (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_MASK)
+#define CCM_ANALOG_PLL_AUDIO_BYPASS_MASK         0x10000u
+#define CCM_ANALOG_PLL_AUDIO_BYPASS_SHIFT        16
+#define CCM_ANALOG_PLL_AUDIO_DITHER_ENABLE_MASK  0x20000u
+#define CCM_ANALOG_PLL_AUDIO_DITHER_ENABLE_SHIFT 17
+#define CCM_ANALOG_PLL_AUDIO_PFD_OFFSET_EN_MASK  0x40000u
+#define CCM_ANALOG_PLL_AUDIO_PFD_OFFSET_EN_SHIFT 18
+#define CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT_MASK 0x180000u
+#define CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT_SHIFT 19
+#define CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT(x)  (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_AUDIO_RSVD0_MASK          0x200000u
+#define CCM_ANALOG_PLL_AUDIO_RSVD0_SHIFT         21
+#define CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL_MASK   0xC00000u
+#define CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL_SHIFT  22
+#define CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL(x)     (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL_MASK)
+#define CCM_ANALOG_PLL_AUDIO_PLL_AUDIO_OVERRIDE_MASK 0x1000000u
+#define CCM_ANALOG_PLL_AUDIO_PLL_AUDIO_OVERRIDE_SHIFT 24
+#define CCM_ANALOG_PLL_AUDIO_RSVD1_MASK          0x7E000000u
+#define CCM_ANALOG_PLL_AUDIO_RSVD1_SHIFT         25
+#define CCM_ANALOG_PLL_AUDIO_RSVD1(x)            (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_RSVD1_SHIFT))&CCM_ANALOG_PLL_AUDIO_RSVD1_MASK)
+#define CCM_ANALOG_PLL_AUDIO_LOCK_MASK           0x80000000u
+#define CCM_ANALOG_PLL_AUDIO_LOCK_SHIFT          31
+/* PLL_AUDIO_SET Bit Fields */
+#define CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT_MASK 0x7Fu
+#define CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT_SHIFT 0
+#define CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT(x)   (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_AUDIO_SET_HALF_LF_MASK    0x80u
+#define CCM_ANALOG_PLL_AUDIO_SET_HALF_LF_SHIFT   7
+#define CCM_ANALOG_PLL_AUDIO_SET_DOUBLE_LF_MASK  0x100u
+#define CCM_ANALOG_PLL_AUDIO_SET_DOUBLE_LF_SHIFT 8
+#define CCM_ANALOG_PLL_AUDIO_SET_HALF_CP_MASK    0x200u
+#define CCM_ANALOG_PLL_AUDIO_SET_HALF_CP_SHIFT   9
+#define CCM_ANALOG_PLL_AUDIO_SET_DOUBLE_CP_MASK  0x400u
+#define CCM_ANALOG_PLL_AUDIO_SET_DOUBLE_CP_SHIFT 10
+#define CCM_ANALOG_PLL_AUDIO_SET_HOLD_RING_OFF_MASK 0x800u
+#define CCM_ANALOG_PLL_AUDIO_SET_HOLD_RING_OFF_SHIFT 11
+#define CCM_ANALOG_PLL_AUDIO_SET_POWERDOWN_MASK  0x1000u
+#define CCM_ANALOG_PLL_AUDIO_SET_POWERDOWN_SHIFT 12
+#define CCM_ANALOG_PLL_AUDIO_SET_ENABLE_CLK_MASK 0x2000u
+#define CCM_ANALOG_PLL_AUDIO_SET_ENABLE_CLK_SHIFT 13
+#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC_MASK 0xC000u
+#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC_SHIFT 14
+#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC_MASK)
+#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_MASK     0x10000u
+#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_SHIFT    16
+#define CCM_ANALOG_PLL_AUDIO_SET_DITHER_ENABLE_MASK 0x20000u
+#define CCM_ANALOG_PLL_AUDIO_SET_DITHER_ENABLE_SHIFT 17
+#define CCM_ANALOG_PLL_AUDIO_SET_PFD_OFFSET_EN_MASK 0x40000u
+#define CCM_ANALOG_PLL_AUDIO_SET_PFD_OFFSET_EN_SHIFT 18
+#define CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT_MASK 0x180000u
+#define CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT_SHIFT 19
+#define CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_AUDIO_SET_RSVD0_MASK      0x200000u
+#define CCM_ANALOG_PLL_AUDIO_SET_RSVD0_SHIFT     21
+#define CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL_MASK 0xC00000u
+#define CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL_SHIFT 22
+#define CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL_MASK)
+#define CCM_ANALOG_PLL_AUDIO_SET_PLL_AUDIO_OVERRIDE_MASK 0x1000000u
+#define CCM_ANALOG_PLL_AUDIO_SET_PLL_AUDIO_OVERRIDE_SHIFT 24
+#define CCM_ANALOG_PLL_AUDIO_SET_RSVD1_MASK      0x7E000000u
+#define CCM_ANALOG_PLL_AUDIO_SET_RSVD1_SHIFT     25
+#define CCM_ANALOG_PLL_AUDIO_SET_RSVD1(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_RSVD1_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_RSVD1_MASK)
+#define CCM_ANALOG_PLL_AUDIO_SET_LOCK_MASK       0x80000000u
+#define CCM_ANALOG_PLL_AUDIO_SET_LOCK_SHIFT      31
+/* PLL_AUDIO_CLR Bit Fields */
+#define CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT_MASK 0x7Fu
+#define CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT_SHIFT 0
+#define CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT(x)   (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_AUDIO_CLR_HALF_LF_MASK    0x80u
+#define CCM_ANALOG_PLL_AUDIO_CLR_HALF_LF_SHIFT   7
+#define CCM_ANALOG_PLL_AUDIO_CLR_DOUBLE_LF_MASK  0x100u
+#define CCM_ANALOG_PLL_AUDIO_CLR_DOUBLE_LF_SHIFT 8
+#define CCM_ANALOG_PLL_AUDIO_CLR_HALF_CP_MASK    0x200u
+#define CCM_ANALOG_PLL_AUDIO_CLR_HALF_CP_SHIFT   9
+#define CCM_ANALOG_PLL_AUDIO_CLR_DOUBLE_CP_MASK  0x400u
+#define CCM_ANALOG_PLL_AUDIO_CLR_DOUBLE_CP_SHIFT 10
+#define CCM_ANALOG_PLL_AUDIO_CLR_HOLD_RING_OFF_MASK 0x800u
+#define CCM_ANALOG_PLL_AUDIO_CLR_HOLD_RING_OFF_SHIFT 11
+#define CCM_ANALOG_PLL_AUDIO_CLR_POWERDOWN_MASK  0x1000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_POWERDOWN_SHIFT 12
+#define CCM_ANALOG_PLL_AUDIO_CLR_ENABLE_CLK_MASK 0x2000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_ENABLE_CLK_SHIFT 13
+#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC_MASK 0xC000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC_SHIFT 14
+#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC_MASK)
+#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_MASK     0x10000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_SHIFT    16
+#define CCM_ANALOG_PLL_AUDIO_CLR_DITHER_ENABLE_MASK 0x20000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_DITHER_ENABLE_SHIFT 17
+#define CCM_ANALOG_PLL_AUDIO_CLR_PFD_OFFSET_EN_MASK 0x40000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_PFD_OFFSET_EN_SHIFT 18
+#define CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT_MASK 0x180000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT_SHIFT 19
+#define CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD0_MASK      0x200000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD0_SHIFT     21
+#define CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL_MASK 0xC00000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL_SHIFT 22
+#define CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL_MASK)
+#define CCM_ANALOG_PLL_AUDIO_CLR_PLL_AUDIO_OVERRIDE_MASK 0x1000000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_PLL_AUDIO_OVERRIDE_SHIFT 24
+#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD1_MASK      0x7E000000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD1_SHIFT     25
+#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD1(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_RSVD1_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_RSVD1_MASK)
+#define CCM_ANALOG_PLL_AUDIO_CLR_LOCK_MASK       0x80000000u
+#define CCM_ANALOG_PLL_AUDIO_CLR_LOCK_SHIFT      31
+/* PLL_AUDIO_TOG Bit Fields */
+#define CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT_MASK 0x7Fu
+#define CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT_SHIFT 0
+#define CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT(x)   (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_AUDIO_TOG_HALF_LF_MASK    0x80u
+#define CCM_ANALOG_PLL_AUDIO_TOG_HALF_LF_SHIFT   7
+#define CCM_ANALOG_PLL_AUDIO_TOG_DOUBLE_LF_MASK  0x100u
+#define CCM_ANALOG_PLL_AUDIO_TOG_DOUBLE_LF_SHIFT 8
+#define CCM_ANALOG_PLL_AUDIO_TOG_HALF_CP_MASK    0x200u
+#define CCM_ANALOG_PLL_AUDIO_TOG_HALF_CP_SHIFT   9
+#define CCM_ANALOG_PLL_AUDIO_TOG_DOUBLE_CP_MASK  0x400u
+#define CCM_ANALOG_PLL_AUDIO_TOG_DOUBLE_CP_SHIFT 10
+#define CCM_ANALOG_PLL_AUDIO_TOG_HOLD_RING_OFF_MASK 0x800u
+#define CCM_ANALOG_PLL_AUDIO_TOG_HOLD_RING_OFF_SHIFT 11
+#define CCM_ANALOG_PLL_AUDIO_TOG_POWERDOWN_MASK  0x1000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_POWERDOWN_SHIFT 12
+#define CCM_ANALOG_PLL_AUDIO_TOG_ENABLE_CLK_MASK 0x2000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_ENABLE_CLK_SHIFT 13
+#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC_MASK 0xC000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC_SHIFT 14
+#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC_MASK)
+#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_MASK     0x10000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_SHIFT    16
+#define CCM_ANALOG_PLL_AUDIO_TOG_DITHER_ENABLE_MASK 0x20000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_DITHER_ENABLE_SHIFT 17
+#define CCM_ANALOG_PLL_AUDIO_TOG_PFD_OFFSET_EN_MASK 0x40000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_PFD_OFFSET_EN_SHIFT 18
+#define CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT_MASK 0x180000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT_SHIFT 19
+#define CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD0_MASK      0x200000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD0_SHIFT     21
+#define CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL_MASK 0xC00000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL_SHIFT 22
+#define CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL_MASK)
+#define CCM_ANALOG_PLL_AUDIO_TOG_PLL_AUDIO_OVERRIDE_MASK 0x1000000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_PLL_AUDIO_OVERRIDE_SHIFT 24
+#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD1_MASK      0x7E000000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD1_SHIFT     25
+#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD1(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_RSVD1_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_RSVD1_MASK)
+#define CCM_ANALOG_PLL_AUDIO_TOG_LOCK_MASK       0x80000000u
+#define CCM_ANALOG_PLL_AUDIO_TOG_LOCK_SHIFT      31
+/* PLL_AUDIO_SS Bit Fields */
+#define CCM_ANALOG_PLL_AUDIO_SS_STEP_MASK        0x7FFFu
+#define CCM_ANALOG_PLL_AUDIO_SS_STEP_SHIFT       0
+#define CCM_ANALOG_PLL_AUDIO_SS_STEP(x)          (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SS_STEP_SHIFT))&CCM_ANALOG_PLL_AUDIO_SS_STEP_MASK)
+#define CCM_ANALOG_PLL_AUDIO_SS_ENABLE_MASK      0x8000u
+#define CCM_ANALOG_PLL_AUDIO_SS_ENABLE_SHIFT     15
+#define CCM_ANALOG_PLL_AUDIO_SS_STOP_MASK        0xFFFF0000u
+#define CCM_ANALOG_PLL_AUDIO_SS_STOP_SHIFT       16
+#define CCM_ANALOG_PLL_AUDIO_SS_STOP(x)          (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SS_STOP_SHIFT))&CCM_ANALOG_PLL_AUDIO_SS_STOP_MASK)
+/* PLL_AUDIO_NUM Bit Fields */
+#define CCM_ANALOG_PLL_AUDIO_NUM_A_MASK          0x3FFFFFFFu
+#define CCM_ANALOG_PLL_AUDIO_NUM_A_SHIFT         0
+#define CCM_ANALOG_PLL_AUDIO_NUM_A(x)            (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_NUM_A_SHIFT))&CCM_ANALOG_PLL_AUDIO_NUM_A_MASK)
+#define CCM_ANALOG_PLL_AUDIO_NUM_RSVD0_MASK      0xC0000000u
+#define CCM_ANALOG_PLL_AUDIO_NUM_RSVD0_SHIFT     30
+#define CCM_ANALOG_PLL_AUDIO_NUM_RSVD0(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_NUM_RSVD0_SHIFT))&CCM_ANALOG_PLL_AUDIO_NUM_RSVD0_MASK)
+/* PLL_AUDIO_DENOM Bit Fields */
+#define CCM_ANALOG_PLL_AUDIO_DENOM_B_MASK        0x3FFFFFFFu
+#define CCM_ANALOG_PLL_AUDIO_DENOM_B_SHIFT       0
+#define CCM_ANALOG_PLL_AUDIO_DENOM_B(x)          (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_DENOM_B_SHIFT))&CCM_ANALOG_PLL_AUDIO_DENOM_B_MASK)
+#define CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0_MASK    0xC0000000u
+#define CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0_SHIFT   30
+#define CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0(x)      (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0_SHIFT))&CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0_MASK)
+/* PLL_VIDEO Bit Fields */
+#define CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK     0x7Fu
+#define CCM_ANALOG_PLL_VIDEO_DIV_SELECT_SHIFT    0
+#define CCM_ANALOG_PLL_VIDEO_DIV_SELECT(x)       (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_VIDEO_HALF_LF_MASK        0x80u
+#define CCM_ANALOG_PLL_VIDEO_HALF_LF_SHIFT       7
+#define CCM_ANALOG_PLL_VIDEO_DOUBLE_LF_MASK      0x100u
+#define CCM_ANALOG_PLL_VIDEO_DOUBLE_LF_SHIFT     8
+#define CCM_ANALOG_PLL_VIDEO_HALF_CP_MASK        0x200u
+#define CCM_ANALOG_PLL_VIDEO_HALF_CP_SHIFT       9
+#define CCM_ANALOG_PLL_VIDEO_DOUBLE_CP_MASK      0x400u
+#define CCM_ANALOG_PLL_VIDEO_DOUBLE_CP_SHIFT     10
+#define CCM_ANALOG_PLL_VIDEO_HOLD_RING_OFF_MASK  0x800u
+#define CCM_ANALOG_PLL_VIDEO_HOLD_RING_OFF_SHIFT 11
+#define CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK      0x1000u
+#define CCM_ANALOG_PLL_VIDEO_POWERDOWN_SHIFT     12
+#define CCM_ANALOG_PLL_VIDEO_ENABLE_CLK_MASK     0x2000u
+#define CCM_ANALOG_PLL_VIDEO_ENABLE_CLK_SHIFT    13
+#define CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK 0xC000u
+#define CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_SHIFT 14
+#define CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(x)   (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)
+#define CCM_ANALOG_PLL_VIDEO_BYPASS_MASK         0x10000u
+#define CCM_ANALOG_PLL_VIDEO_BYPASS_SHIFT        16
+#define CCM_ANALOG_PLL_VIDEO_DITHER_ENABLE_MASK  0x20000u
+#define CCM_ANALOG_PLL_VIDEO_DITHER_ENABLE_SHIFT 17
+#define CCM_ANALOG_PLL_VIDEO_PFD_OFFSET_EN_MASK  0x40000u
+#define CCM_ANALOG_PLL_VIDEO_PFD_OFFSET_EN_SHIFT 18
+#define CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT_MASK 0x180000u
+#define CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT_SHIFT 19
+#define CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT(x)  (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_VIDEO_RSVD0_MASK          0x200000u
+#define CCM_ANALOG_PLL_VIDEO_RSVD0_SHIFT         21
+#define CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL_MASK   0xC00000u
+#define CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL_SHIFT  22
+#define CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL(x)     (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL_MASK)
+#define CCM_ANALOG_PLL_VIDEO_PLL_VIDEO_OVERRIDE_MASK 0x1000000u
+#define CCM_ANALOG_PLL_VIDEO_PLL_VIDEO_OVERRIDE_SHIFT 24
+#define CCM_ANALOG_PLL_VIDEO_RSVD1_MASK          0x7E000000u
+#define CCM_ANALOG_PLL_VIDEO_RSVD1_SHIFT         25
+#define CCM_ANALOG_PLL_VIDEO_RSVD1(x)            (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_RSVD1_SHIFT))&CCM_ANALOG_PLL_VIDEO_RSVD1_MASK)
+#define CCM_ANALOG_PLL_VIDEO_LOCK_MASK           0x80000000u
+#define CCM_ANALOG_PLL_VIDEO_LOCK_SHIFT          31
+/* PLL_VIDEO_SET Bit Fields */
+#define CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT_MASK 0x7Fu
+#define CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT_SHIFT 0
+#define CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(x)   (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_VIDEO_SET_HALF_LF_MASK    0x80u
+#define CCM_ANALOG_PLL_VIDEO_SET_HALF_LF_SHIFT   7
+#define CCM_ANALOG_PLL_VIDEO_SET_DOUBLE_LF_MASK  0x100u
+#define CCM_ANALOG_PLL_VIDEO_SET_DOUBLE_LF_SHIFT 8
+#define CCM_ANALOG_PLL_VIDEO_SET_HALF_CP_MASK    0x200u
+#define CCM_ANALOG_PLL_VIDEO_SET_HALF_CP_SHIFT   9
+#define CCM_ANALOG_PLL_VIDEO_SET_DOUBLE_CP_MASK  0x400u
+#define CCM_ANALOG_PLL_VIDEO_SET_DOUBLE_CP_SHIFT 10
+#define CCM_ANALOG_PLL_VIDEO_SET_HOLD_RING_OFF_MASK 0x800u
+#define CCM_ANALOG_PLL_VIDEO_SET_HOLD_RING_OFF_SHIFT 11
+#define CCM_ANALOG_PLL_VIDEO_SET_POWERDOWN_MASK  0x1000u
+#define CCM_ANALOG_PLL_VIDEO_SET_POWERDOWN_SHIFT 12
+#define CCM_ANALOG_PLL_VIDEO_SET_ENABLE_CLK_MASK 0x2000u
+#define CCM_ANALOG_PLL_VIDEO_SET_ENABLE_CLK_SHIFT 13
+#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC_MASK 0xC000u
+#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC_SHIFT 14
+#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC_MASK)
+#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_MASK     0x10000u
+#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_SHIFT    16
+#define CCM_ANALOG_PLL_VIDEO_SET_DITHER_ENABLE_MASK 0x20000u
+#define CCM_ANALOG_PLL_VIDEO_SET_DITHER_ENABLE_SHIFT 17
+#define CCM_ANALOG_PLL_VIDEO_SET_PFD_OFFSET_EN_MASK 0x40000u
+#define CCM_ANALOG_PLL_VIDEO_SET_PFD_OFFSET_EN_SHIFT 18
+#define CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT_MASK 0x180000u
+#define CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT_SHIFT 19
+#define CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_VIDEO_SET_RSVD0_MASK      0x200000u
+#define CCM_ANALOG_PLL_VIDEO_SET_RSVD0_SHIFT     21
+#define CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL_MASK 0xC00000u
+#define CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL_SHIFT 22
+#define CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL_MASK)
+#define CCM_ANALOG_PLL_VIDEO_SET_PLL_VIDEO_OVERRIDE_MASK 0x1000000u
+#define CCM_ANALOG_PLL_VIDEO_SET_PLL_VIDEO_OVERRIDE_SHIFT 24
+#define CCM_ANALOG_PLL_VIDEO_SET_RSVD1_MASK      0x7E000000u
+#define CCM_ANALOG_PLL_VIDEO_SET_RSVD1_SHIFT     25
+#define CCM_ANALOG_PLL_VIDEO_SET_RSVD1(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_RSVD1_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_RSVD1_MASK)
+#define CCM_ANALOG_PLL_VIDEO_SET_LOCK_MASK       0x80000000u
+#define CCM_ANALOG_PLL_VIDEO_SET_LOCK_SHIFT      31
+/* PLL_VIDEO_CLR Bit Fields */
+#define CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_MASK 0x7Fu
+#define CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_SHIFT 0
+#define CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT(x)   (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_VIDEO_CLR_HALF_LF_MASK    0x80u
+#define CCM_ANALOG_PLL_VIDEO_CLR_HALF_LF_SHIFT   7
+#define CCM_ANALOG_PLL_VIDEO_CLR_DOUBLE_LF_MASK  0x100u
+#define CCM_ANALOG_PLL_VIDEO_CLR_DOUBLE_LF_SHIFT 8
+#define CCM_ANALOG_PLL_VIDEO_CLR_HALF_CP_MASK    0x200u
+#define CCM_ANALOG_PLL_VIDEO_CLR_HALF_CP_SHIFT   9
+#define CCM_ANALOG_PLL_VIDEO_CLR_DOUBLE_CP_MASK  0x400u
+#define CCM_ANALOG_PLL_VIDEO_CLR_DOUBLE_CP_SHIFT 10
+#define CCM_ANALOG_PLL_VIDEO_CLR_HOLD_RING_OFF_MASK 0x800u
+#define CCM_ANALOG_PLL_VIDEO_CLR_HOLD_RING_OFF_SHIFT 11
+#define CCM_ANALOG_PLL_VIDEO_CLR_POWERDOWN_MASK  0x1000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_POWERDOWN_SHIFT 12
+#define CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_MASK 0x2000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_SHIFT 13
+#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC_MASK 0xC000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC_SHIFT 14
+#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC_MASK)
+#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_MASK     0x10000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_SHIFT    16
+#define CCM_ANALOG_PLL_VIDEO_CLR_DITHER_ENABLE_MASK 0x20000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_DITHER_ENABLE_SHIFT 17
+#define CCM_ANALOG_PLL_VIDEO_CLR_PFD_OFFSET_EN_MASK 0x40000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_PFD_OFFSET_EN_SHIFT 18
+#define CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_MASK 0x180000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_SHIFT 19
+#define CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD0_MASK      0x200000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD0_SHIFT     21
+#define CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_MASK 0xC00000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_SHIFT 22
+#define CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_MASK)
+#define CCM_ANALOG_PLL_VIDEO_CLR_PLL_VIDEO_OVERRIDE_MASK 0x1000000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_PLL_VIDEO_OVERRIDE_SHIFT 24
+#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD1_MASK      0x7E000000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD1_SHIFT     25
+#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD1(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_RSVD1_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_RSVD1_MASK)
+#define CCM_ANALOG_PLL_VIDEO_CLR_LOCK_MASK       0x80000000u
+#define CCM_ANALOG_PLL_VIDEO_CLR_LOCK_SHIFT      31
+/* PLL_VIDEO_TOG Bit Fields */
+#define CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT_MASK 0x7Fu
+#define CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT_SHIFT 0
+#define CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT(x)   (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_VIDEO_TOG_HALF_LF_MASK    0x80u
+#define CCM_ANALOG_PLL_VIDEO_TOG_HALF_LF_SHIFT   7
+#define CCM_ANALOG_PLL_VIDEO_TOG_DOUBLE_LF_MASK  0x100u
+#define CCM_ANALOG_PLL_VIDEO_TOG_DOUBLE_LF_SHIFT 8
+#define CCM_ANALOG_PLL_VIDEO_TOG_HALF_CP_MASK    0x200u
+#define CCM_ANALOG_PLL_VIDEO_TOG_HALF_CP_SHIFT   9
+#define CCM_ANALOG_PLL_VIDEO_TOG_DOUBLE_CP_MASK  0x400u
+#define CCM_ANALOG_PLL_VIDEO_TOG_DOUBLE_CP_SHIFT 10
+#define CCM_ANALOG_PLL_VIDEO_TOG_HOLD_RING_OFF_MASK 0x800u
+#define CCM_ANALOG_PLL_VIDEO_TOG_HOLD_RING_OFF_SHIFT 11
+#define CCM_ANALOG_PLL_VIDEO_TOG_POWERDOWN_MASK  0x1000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_POWERDOWN_SHIFT 12
+#define CCM_ANALOG_PLL_VIDEO_TOG_ENABLE_CLK_MASK 0x2000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_ENABLE_CLK_SHIFT 13
+#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC_MASK 0xC000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC_SHIFT 14
+#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC_MASK)
+#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_MASK     0x10000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_SHIFT    16
+#define CCM_ANALOG_PLL_VIDEO_TOG_DITHER_ENABLE_MASK 0x20000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_DITHER_ENABLE_SHIFT 17
+#define CCM_ANALOG_PLL_VIDEO_TOG_PFD_OFFSET_EN_MASK 0x40000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_PFD_OFFSET_EN_SHIFT 18
+#define CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT_MASK 0x180000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT_SHIFT 19
+#define CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT_MASK)
+#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD0_MASK      0x200000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD0_SHIFT     21
+#define CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL_MASK 0xC00000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL_SHIFT 22
+#define CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL_MASK)
+#define CCM_ANALOG_PLL_VIDEO_TOG_PLL_VIDEO_OVERRIDE_MASK 0x1000000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_PLL_VIDEO_OVERRIDE_SHIFT 24
+#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD1_MASK      0x7E000000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD1_SHIFT     25
+#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD1(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_RSVD1_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_RSVD1_MASK)
+#define CCM_ANALOG_PLL_VIDEO_TOG_LOCK_MASK       0x80000000u
+#define CCM_ANALOG_PLL_VIDEO_TOG_LOCK_SHIFT      31
+/* PLL_VIDEO_SS Bit Fields */
+#define CCM_ANALOG_PLL_VIDEO_SS_STEP_MASK        0x7FFFu
+#define CCM_ANALOG_PLL_VIDEO_SS_STEP_SHIFT       0
+#define CCM_ANALOG_PLL_VIDEO_SS_STEP(x)          (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SS_STEP_SHIFT))&CCM_ANALOG_PLL_VIDEO_SS_STEP_MASK)
+#define CCM_ANALOG_PLL_VIDEO_SS_ENABLE_MASK      0x8000u
+#define CCM_ANALOG_PLL_VIDEO_SS_ENABLE_SHIFT     15
+#define CCM_ANALOG_PLL_VIDEO_SS_STOP_MASK        0xFFFF0000u
+#define CCM_ANALOG_PLL_VIDEO_SS_STOP_SHIFT       16
+#define CCM_ANALOG_PLL_VIDEO_SS_STOP(x)          (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SS_STOP_SHIFT))&CCM_ANALOG_PLL_VIDEO_SS_STOP_MASK)
+/* PLL_VIDEO_NUM Bit Fields */
+#define CCM_ANALOG_PLL_VIDEO_NUM_A_MASK          0x3FFFFFFFu
+#define CCM_ANALOG_PLL_VIDEO_NUM_A_SHIFT         0
+#define CCM_ANALOG_PLL_VIDEO_NUM_A(x)            (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_NUM_A_SHIFT))&CCM_ANALOG_PLL_VIDEO_NUM_A_MASK)
+#define CCM_ANALOG_PLL_VIDEO_NUM_RSVD0_MASK      0xC0000000u
+#define CCM_ANALOG_PLL_VIDEO_NUM_RSVD0_SHIFT     30
+#define CCM_ANALOG_PLL_VIDEO_NUM_RSVD0(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_NUM_RSVD0_SHIFT))&CCM_ANALOG_PLL_VIDEO_NUM_RSVD0_MASK)
+/* PLL_VIDEO_DENOM Bit Fields */
+#define CCM_ANALOG_PLL_VIDEO_DENOM_B_MASK        0x3FFFFFFFu
+#define CCM_ANALOG_PLL_VIDEO_DENOM_B_SHIFT       0
+#define CCM_ANALOG_PLL_VIDEO_DENOM_B(x)          (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_DENOM_B_SHIFT))&CCM_ANALOG_PLL_VIDEO_DENOM_B_MASK)
+#define CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0_MASK    0xC0000000u
+#define CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0_SHIFT   30
+#define CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0(x)      (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0_SHIFT))&CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0_MASK)
+/* CLK_MISC0 Bit Fields */
+#define CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL_MASK  0x1Fu
+#define CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL_SHIFT 0
+#define CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL(x)    (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL_SHIFT))&CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL_MASK)
+#define CCM_ANALOG_CLK_MISC0_LVDSCLK1_OBEN_MASK  0x20u
+#define CCM_ANALOG_CLK_MISC0_LVDSCLK1_OBEN_SHIFT 5
+#define CCM_ANALOG_CLK_MISC0_LVDSCLK1_IBEN_MASK  0x40u
+#define CCM_ANALOG_CLK_MISC0_LVDSCLK1_IBEN_SHIFT 6
+#define CCM_ANALOG_CLK_MISC0_ACLK2_PREDIV_MASK   0x80u
+#define CCM_ANALOG_CLK_MISC0_ACLK2_PREDIV_SHIFT  7
+#define CCM_ANALOG_CLK_MISC0_RSVD0_MASK          0xFFFFFF00u
+#define CCM_ANALOG_CLK_MISC0_RSVD0_SHIFT         8
+#define CCM_ANALOG_CLK_MISC0_RSVD0(x)            (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_RSVD0_SHIFT))&CCM_ANALOG_CLK_MISC0_RSVD0_MASK)
+/* CLK_MISC0_SET Bit Fields */
+#define CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL_MASK 0x1Fu
+#define CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL_SHIFT 0
+#define CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL_SHIFT))&CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL_MASK)
+#define CCM_ANALOG_CLK_MISC0_SET_LVDSCLK1_OBEN_MASK 0x20u
+#define CCM_ANALOG_CLK_MISC0_SET_LVDSCLK1_OBEN_SHIFT 5
+#define CCM_ANALOG_CLK_MISC0_SET_LVDSCLK1_IBEN_MASK 0x40u
+#define CCM_ANALOG_CLK_MISC0_SET_LVDSCLK1_IBEN_SHIFT 6
+#define CCM_ANALOG_CLK_MISC0_SET_ACLK2_PREDIV_MASK 0x80u
+#define CCM_ANALOG_CLK_MISC0_SET_ACLK2_PREDIV_SHIFT 7
+#define CCM_ANALOG_CLK_MISC0_SET_RSVD0_MASK      0xFFFFFF00u
+#define CCM_ANALOG_CLK_MISC0_SET_RSVD0_SHIFT     8
+#define CCM_ANALOG_CLK_MISC0_SET_RSVD0(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_SET_RSVD0_SHIFT))&CCM_ANALOG_CLK_MISC0_SET_RSVD0_MASK)
+/* CLK_MISC0_CLR Bit Fields */
+#define CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL_MASK 0x1Fu
+#define CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL_SHIFT 0
+#define CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL_SHIFT))&CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL_MASK)
+#define CCM_ANALOG_CLK_MISC0_CLR_LVDSCLK1_OBEN_MASK 0x20u
+#define CCM_ANALOG_CLK_MISC0_CLR_LVDSCLK1_OBEN_SHIFT 5
+#define CCM_ANALOG_CLK_MISC0_CLR_LVDSCLK1_IBEN_MASK 0x40u
+#define CCM_ANALOG_CLK_MISC0_CLR_LVDSCLK1_IBEN_SHIFT 6
+#define CCM_ANALOG_CLK_MISC0_CLR_ACLK2_PREDIV_MASK 0x80u
+#define CCM_ANALOG_CLK_MISC0_CLR_ACLK2_PREDIV_SHIFT 7
+#define CCM_ANALOG_CLK_MISC0_CLR_RSVD0_MASK      0xFFFFFF00u
+#define CCM_ANALOG_CLK_MISC0_CLR_RSVD0_SHIFT     8
+#define CCM_ANALOG_CLK_MISC0_CLR_RSVD0(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_CLR_RSVD0_SHIFT))&CCM_ANALOG_CLK_MISC0_CLR_RSVD0_MASK)
+/* CLK_MISC0_TOG Bit Fields */
+#define CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL_MASK 0x1Fu
+#define CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL_SHIFT 0
+#define CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL_SHIFT))&CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL_MASK)
+#define CCM_ANALOG_CLK_MISC0_TOG_LVDSCLK1_OBEN_MASK 0x20u
+#define CCM_ANALOG_CLK_MISC0_TOG_LVDSCLK1_OBEN_SHIFT 5
+#define CCM_ANALOG_CLK_MISC0_TOG_LVDSCLK1_IBEN_MASK 0x40u
+#define CCM_ANALOG_CLK_MISC0_TOG_LVDSCLK1_IBEN_SHIFT 6
+#define CCM_ANALOG_CLK_MISC0_TOG_ACLK2_PREDIV_MASK 0x80u
+#define CCM_ANALOG_CLK_MISC0_TOG_ACLK2_PREDIV_SHIFT 7
+#define CCM_ANALOG_CLK_MISC0_TOG_RSVD0_MASK      0xFFFFFF00u
+#define CCM_ANALOG_CLK_MISC0_TOG_RSVD0_SHIFT     8
+#define CCM_ANALOG_CLK_MISC0_TOG_RSVD0(x)        (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_TOG_RSVD0_SHIFT))&CCM_ANALOG_CLK_MISC0_TOG_RSVD0_MASK)
+
+/* REG_1P0A Bit Fields */
+#define PMU_REG_1P0A_ENABLE_LINREG_MASK          0x1u
+#define PMU_REG_1P0A_ENABLE_LINREG_SHIFT         0
+#define PMU_REG_1P0A_ENABLE_BO_MASK              0x2u
+#define PMU_REG_1P0A_ENABLE_BO_SHIFT             1
+#define PMU_REG_1P0A_ENABLE_ILIMIT_MASK          0x4u
+#define PMU_REG_1P0A_ENABLE_ILIMIT_SHIFT         2
+#define PMU_REG_1P0A_ENABLE_PULLDOWN_MASK        0x8u
+#define PMU_REG_1P0A_ENABLE_PULLDOWN_SHIFT       3
+#define PMU_REG_1P0A_BO_OFFSET_MASK              0x70u
+#define PMU_REG_1P0A_BO_OFFSET_SHIFT             4
+#define PMU_REG_1P0A_BO_OFFSET(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_BO_OFFSET_SHIFT))&PMU_REG_1P0A_BO_OFFSET_MASK)
+#define PMU_REG_1P0A_ENABLE_PWRUPLOAD_MASK       0x80u
+#define PMU_REG_1P0A_ENABLE_PWRUPLOAD_SHIFT      7
+#define PMU_REG_1P0A_OUTPUT_TRG_MASK             0x1F00u
+#define PMU_REG_1P0A_OUTPUT_TRG_SHIFT            8
+#define PMU_REG_1P0A_OUTPUT_TRG(x)               (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_OUTPUT_TRG_SHIFT))&PMU_REG_1P0A_OUTPUT_TRG_MASK)
+#define PMU_REG_1P0A_RSVD0_MASK                  0xE000u
+#define PMU_REG_1P0A_RSVD0_SHIFT                 13
+#define PMU_REG_1P0A_RSVD0(x)                    (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_RSVD0_SHIFT))&PMU_REG_1P0A_RSVD0_MASK)
+#define PMU_REG_1P0A_BO_MASK                     0x10000u
+#define PMU_REG_1P0A_BO_SHIFT                    16
+#define PMU_REG_1P0A_OK_MASK                     0x20000u
+#define PMU_REG_1P0A_OK_SHIFT                    17
+#define PMU_REG_1P0A_ENABLE_WEAK_LINREG_MASK     0x40000u
+#define PMU_REG_1P0A_ENABLE_WEAK_LINREG_SHIFT    18
+#define PMU_REG_1P0A_SELREF_WEAK_LINREG_MASK     0x80000u
+#define PMU_REG_1P0A_SELREF_WEAK_LINREG_SHIFT    19
+#define PMU_REG_1P0A_REG_TEST_MASK               0xF00000u
+#define PMU_REG_1P0A_REG_TEST_SHIFT              20
+#define PMU_REG_1P0A_REG_TEST(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_REG_TEST_SHIFT))&PMU_REG_1P0A_REG_TEST_MASK)
+#define PMU_REG_1P0A_RSVD1_MASK                  0xFF000000u
+#define PMU_REG_1P0A_RSVD1_SHIFT                 24
+#define PMU_REG_1P0A_RSVD1(x)                    (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_RSVD1_SHIFT))&PMU_REG_1P0A_RSVD1_MASK)
+/* REG_1P0A_SET Bit Fields */
+#define PMU_REG_1P0A_SET_ENABLE_LINREG_MASK      0x1u
+#define PMU_REG_1P0A_SET_ENABLE_LINREG_SHIFT     0
+#define PMU_REG_1P0A_SET_ENABLE_BO_MASK          0x2u
+#define PMU_REG_1P0A_SET_ENABLE_BO_SHIFT         1
+#define PMU_REG_1P0A_SET_ENABLE_ILIMIT_MASK      0x4u
+#define PMU_REG_1P0A_SET_ENABLE_ILIMIT_SHIFT     2
+#define PMU_REG_1P0A_SET_ENABLE_PULLDOWN_MASK    0x8u
+#define PMU_REG_1P0A_SET_ENABLE_PULLDOWN_SHIFT   3
+#define PMU_REG_1P0A_SET_BO_OFFSET_MASK          0x70u
+#define PMU_REG_1P0A_SET_BO_OFFSET_SHIFT         4
+#define PMU_REG_1P0A_SET_BO_OFFSET(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_BO_OFFSET_SHIFT))&PMU_REG_1P0A_SET_BO_OFFSET_MASK)
+#define PMU_REG_1P0A_SET_ENABLE_PWRUPLOAD_MASK   0x80u
+#define PMU_REG_1P0A_SET_ENABLE_PWRUPLOAD_SHIFT  7
+#define PMU_REG_1P0A_SET_OUTPUT_TRG_MASK         0x1F00u
+#define PMU_REG_1P0A_SET_OUTPUT_TRG_SHIFT        8
+#define PMU_REG_1P0A_SET_OUTPUT_TRG(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_OUTPUT_TRG_SHIFT))&PMU_REG_1P0A_SET_OUTPUT_TRG_MASK)
+#define PMU_REG_1P0A_SET_RSVD0_MASK              0xE000u
+#define PMU_REG_1P0A_SET_RSVD0_SHIFT             13
+#define PMU_REG_1P0A_SET_RSVD0(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_RSVD0_SHIFT))&PMU_REG_1P0A_SET_RSVD0_MASK)
+#define PMU_REG_1P0A_SET_BO_MASK                 0x10000u
+#define PMU_REG_1P0A_SET_BO_SHIFT                16
+#define PMU_REG_1P0A_SET_OK_MASK                 0x20000u
+#define PMU_REG_1P0A_SET_OK_SHIFT                17
+#define PMU_REG_1P0A_SET_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_1P0A_SET_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_1P0A_SET_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_1P0A_SET_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_1P0A_SET_REG_TEST_MASK           0xF00000u
+#define PMU_REG_1P0A_SET_REG_TEST_SHIFT          20
+#define PMU_REG_1P0A_SET_REG_TEST(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_REG_TEST_SHIFT))&PMU_REG_1P0A_SET_REG_TEST_MASK)
+#define PMU_REG_1P0A_SET_RSVD1_MASK              0xFF000000u
+#define PMU_REG_1P0A_SET_RSVD1_SHIFT             24
+#define PMU_REG_1P0A_SET_RSVD1(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_RSVD1_SHIFT))&PMU_REG_1P0A_SET_RSVD1_MASK)
+/* REG_1P0A_CLR Bit Fields */
+#define PMU_REG_1P0A_CLR_ENABLE_LINREG_MASK      0x1u
+#define PMU_REG_1P0A_CLR_ENABLE_LINREG_SHIFT     0
+#define PMU_REG_1P0A_CLR_ENABLE_BO_MASK          0x2u
+#define PMU_REG_1P0A_CLR_ENABLE_BO_SHIFT         1
+#define PMU_REG_1P0A_CLR_ENABLE_ILIMIT_MASK      0x4u
+#define PMU_REG_1P0A_CLR_ENABLE_ILIMIT_SHIFT     2
+#define PMU_REG_1P0A_CLR_ENABLE_PULLDOWN_MASK    0x8u
+#define PMU_REG_1P0A_CLR_ENABLE_PULLDOWN_SHIFT   3
+#define PMU_REG_1P0A_CLR_BO_OFFSET_MASK          0x70u
+#define PMU_REG_1P0A_CLR_BO_OFFSET_SHIFT         4
+#define PMU_REG_1P0A_CLR_BO_OFFSET(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_BO_OFFSET_SHIFT))&PMU_REG_1P0A_CLR_BO_OFFSET_MASK)
+#define PMU_REG_1P0A_CLR_ENABLE_PWRUPLOAD_MASK   0x80u
+#define PMU_REG_1P0A_CLR_ENABLE_PWRUPLOAD_SHIFT  7
+#define PMU_REG_1P0A_CLR_OUTPUT_TRG_MASK         0x1F00u
+#define PMU_REG_1P0A_CLR_OUTPUT_TRG_SHIFT        8
+#define PMU_REG_1P0A_CLR_OUTPUT_TRG(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_1P0A_CLR_OUTPUT_TRG_MASK)
+#define PMU_REG_1P0A_CLR_RSVD0_MASK              0xE000u
+#define PMU_REG_1P0A_CLR_RSVD0_SHIFT             13
+#define PMU_REG_1P0A_CLR_RSVD0(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_RSVD0_SHIFT))&PMU_REG_1P0A_CLR_RSVD0_MASK)
+#define PMU_REG_1P0A_CLR_BO_MASK                 0x10000u
+#define PMU_REG_1P0A_CLR_BO_SHIFT                16
+#define PMU_REG_1P0A_CLR_OK_MASK                 0x20000u
+#define PMU_REG_1P0A_CLR_OK_SHIFT                17
+#define PMU_REG_1P0A_CLR_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_1P0A_CLR_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_1P0A_CLR_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_1P0A_CLR_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_1P0A_CLR_REG_TEST_MASK           0xF00000u
+#define PMU_REG_1P0A_CLR_REG_TEST_SHIFT          20
+#define PMU_REG_1P0A_CLR_REG_TEST(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_REG_TEST_SHIFT))&PMU_REG_1P0A_CLR_REG_TEST_MASK)
+#define PMU_REG_1P0A_CLR_RSVD1_MASK              0xFF000000u
+#define PMU_REG_1P0A_CLR_RSVD1_SHIFT             24
+#define PMU_REG_1P0A_CLR_RSVD1(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_RSVD1_SHIFT))&PMU_REG_1P0A_CLR_RSVD1_MASK)
+/* REG_1P0A_TOG Bit Fields */
+#define PMU_REG_1P0A_TOG_ENABLE_LINREG_MASK      0x1u
+#define PMU_REG_1P0A_TOG_ENABLE_LINREG_SHIFT     0
+#define PMU_REG_1P0A_TOG_ENABLE_BO_MASK          0x2u
+#define PMU_REG_1P0A_TOG_ENABLE_BO_SHIFT         1
+#define PMU_REG_1P0A_TOG_ENABLE_ILIMIT_MASK      0x4u
+#define PMU_REG_1P0A_TOG_ENABLE_ILIMIT_SHIFT     2
+#define PMU_REG_1P0A_TOG_ENABLE_PULLDOWN_MASK    0x8u
+#define PMU_REG_1P0A_TOG_ENABLE_PULLDOWN_SHIFT   3
+#define PMU_REG_1P0A_TOG_BO_OFFSET_MASK          0x70u
+#define PMU_REG_1P0A_TOG_BO_OFFSET_SHIFT         4
+#define PMU_REG_1P0A_TOG_BO_OFFSET(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_BO_OFFSET_SHIFT))&PMU_REG_1P0A_TOG_BO_OFFSET_MASK)
+#define PMU_REG_1P0A_TOG_ENABLE_PWRUPLOAD_MASK   0x80u
+#define PMU_REG_1P0A_TOG_ENABLE_PWRUPLOAD_SHIFT  7
+#define PMU_REG_1P0A_TOG_OUTPUT_TRG_MASK         0x1F00u
+#define PMU_REG_1P0A_TOG_OUTPUT_TRG_SHIFT        8
+#define PMU_REG_1P0A_TOG_OUTPUT_TRG(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_1P0A_TOG_OUTPUT_TRG_MASK)
+#define PMU_REG_1P0A_TOG_RSVD0_MASK              0xE000u
+#define PMU_REG_1P0A_TOG_RSVD0_SHIFT             13
+#define PMU_REG_1P0A_TOG_RSVD0(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_RSVD0_SHIFT))&PMU_REG_1P0A_TOG_RSVD0_MASK)
+#define PMU_REG_1P0A_TOG_BO_MASK                 0x10000u
+#define PMU_REG_1P0A_TOG_BO_SHIFT                16
+#define PMU_REG_1P0A_TOG_OK_MASK                 0x20000u
+#define PMU_REG_1P0A_TOG_OK_SHIFT                17
+#define PMU_REG_1P0A_TOG_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_1P0A_TOG_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_1P0A_TOG_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_1P0A_TOG_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_1P0A_TOG_REG_TEST_MASK           0xF00000u
+#define PMU_REG_1P0A_TOG_REG_TEST_SHIFT          20
+#define PMU_REG_1P0A_TOG_REG_TEST(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_REG_TEST_SHIFT))&PMU_REG_1P0A_TOG_REG_TEST_MASK)
+#define PMU_REG_1P0A_TOG_RSVD1_MASK              0xFF000000u
+#define PMU_REG_1P0A_TOG_RSVD1_SHIFT             24
+#define PMU_REG_1P0A_TOG_RSVD1(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_RSVD1_SHIFT))&PMU_REG_1P0A_TOG_RSVD1_MASK)
+/* REG_1P0D Bit Fields */
+#define PMU_REG_1P0D_ENABLE_LINREG_MASK          0x1u
+#define PMU_REG_1P0D_ENABLE_LINREG_SHIFT         0
+#define PMU_REG_1P0D_ENABLE_BO_MASK              0x2u
+#define PMU_REG_1P0D_ENABLE_BO_SHIFT             1
+#define PMU_REG_1P0D_ENABLE_ILIMIT_MASK          0x4u
+#define PMU_REG_1P0D_ENABLE_ILIMIT_SHIFT         2
+#define PMU_REG_1P0D_ENABLE_PULLDOWN_MASK        0x8u
+#define PMU_REG_1P0D_ENABLE_PULLDOWN_SHIFT       3
+#define PMU_REG_1P0D_BO_OFFSET_MASK              0x70u
+#define PMU_REG_1P0D_BO_OFFSET_SHIFT             4
+#define PMU_REG_1P0D_BO_OFFSET(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_BO_OFFSET_SHIFT))&PMU_REG_1P0D_BO_OFFSET_MASK)
+#define PMU_REG_1P0D_ENABLE_PWRUPLOAD_MASK       0x80u
+#define PMU_REG_1P0D_ENABLE_PWRUPLOAD_SHIFT      7
+#define PMU_REG_1P0D_OUTPUT_TRG_MASK             0x1F00u
+#define PMU_REG_1P0D_OUTPUT_TRG_SHIFT            8
+#define PMU_REG_1P0D_OUTPUT_TRG(x)               (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_OUTPUT_TRG_SHIFT))&PMU_REG_1P0D_OUTPUT_TRG_MASK)
+#define PMU_REG_1P0D_RSVD0_MASK                  0xE000u
+#define PMU_REG_1P0D_RSVD0_SHIFT                 13
+#define PMU_REG_1P0D_RSVD0(x)                    (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_RSVD0_SHIFT))&PMU_REG_1P0D_RSVD0_MASK)
+#define PMU_REG_1P0D_BO_MASK                     0x10000u
+#define PMU_REG_1P0D_BO_SHIFT                    16
+#define PMU_REG_1P0D_OK_MASK                     0x20000u
+#define PMU_REG_1P0D_OK_SHIFT                    17
+#define PMU_REG_1P0D_ENABLE_WEAK_LINREG_MASK     0x40000u
+#define PMU_REG_1P0D_ENABLE_WEAK_LINREG_SHIFT    18
+#define PMU_REG_1P0D_SELREF_WEAK_LINREG_MASK     0x80000u
+#define PMU_REG_1P0D_SELREF_WEAK_LINREG_SHIFT    19
+#define PMU_REG_1P0D_REG_TEST_MASK               0xF00000u
+#define PMU_REG_1P0D_REG_TEST_SHIFT              20
+#define PMU_REG_1P0D_REG_TEST(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_REG_TEST_SHIFT))&PMU_REG_1P0D_REG_TEST_MASK)
+#define PMU_REG_1P0D_RSVD1_MASK                  0x7F000000u
+#define PMU_REG_1P0D_RSVD1_SHIFT                 24
+#define PMU_REG_1P0D_RSVD1(x)                    (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_RSVD1_SHIFT))&PMU_REG_1P0D_RSVD1_MASK)
+#define PMU_REG_1P0D_OVERRIDE_MASK               0x80000000u
+#define PMU_REG_1P0D_OVERRIDE_SHIFT              31
+/* REG_1P0D_SET Bit Fields */
+#define PMU_REG_1P0D_SET_ENABLE_LINREG_MASK      0x1u
+#define PMU_REG_1P0D_SET_ENABLE_LINREG_SHIFT     0
+#define PMU_REG_1P0D_SET_ENABLE_BO_MASK          0x2u
+#define PMU_REG_1P0D_SET_ENABLE_BO_SHIFT         1
+#define PMU_REG_1P0D_SET_ENABLE_ILIMIT_MASK      0x4u
+#define PMU_REG_1P0D_SET_ENABLE_ILIMIT_SHIFT     2
+#define PMU_REG_1P0D_SET_ENABLE_PULLDOWN_MASK    0x8u
+#define PMU_REG_1P0D_SET_ENABLE_PULLDOWN_SHIFT   3
+#define PMU_REG_1P0D_SET_BO_OFFSET_MASK          0x70u
+#define PMU_REG_1P0D_SET_BO_OFFSET_SHIFT         4
+#define PMU_REG_1P0D_SET_BO_OFFSET(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_BO_OFFSET_SHIFT))&PMU_REG_1P0D_SET_BO_OFFSET_MASK)
+#define PMU_REG_1P0D_SET_ENABLE_PWRUPLOAD_MASK   0x80u
+#define PMU_REG_1P0D_SET_ENABLE_PWRUPLOAD_SHIFT  7
+#define PMU_REG_1P0D_SET_OUTPUT_TRG_MASK         0x1F00u
+#define PMU_REG_1P0D_SET_OUTPUT_TRG_SHIFT        8
+#define PMU_REG_1P0D_SET_OUTPUT_TRG(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_OUTPUT_TRG_SHIFT))&PMU_REG_1P0D_SET_OUTPUT_TRG_MASK)
+#define PMU_REG_1P0D_SET_RSVD0_MASK              0xE000u
+#define PMU_REG_1P0D_SET_RSVD0_SHIFT             13
+#define PMU_REG_1P0D_SET_RSVD0(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_RSVD0_SHIFT))&PMU_REG_1P0D_SET_RSVD0_MASK)
+#define PMU_REG_1P0D_SET_BO_MASK                 0x10000u
+#define PMU_REG_1P0D_SET_BO_SHIFT                16
+#define PMU_REG_1P0D_SET_OK_MASK                 0x20000u
+#define PMU_REG_1P0D_SET_OK_SHIFT                17
+#define PMU_REG_1P0D_SET_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_1P0D_SET_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_1P0D_SET_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_1P0D_SET_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_1P0D_SET_REG_TEST_MASK           0xF00000u
+#define PMU_REG_1P0D_SET_REG_TEST_SHIFT          20
+#define PMU_REG_1P0D_SET_REG_TEST(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_REG_TEST_SHIFT))&PMU_REG_1P0D_SET_REG_TEST_MASK)
+#define PMU_REG_1P0D_SET_RSVD1_MASK              0x7F000000u
+#define PMU_REG_1P0D_SET_RSVD1_SHIFT             24
+#define PMU_REG_1P0D_SET_RSVD1(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_RSVD1_SHIFT))&PMU_REG_1P0D_SET_RSVD1_MASK)
+#define PMU_REG_1P0D_SET_OVERRIDE_MASK           0x80000000u
+#define PMU_REG_1P0D_SET_OVERRIDE_SHIFT          31
+/* REG_1P0D_CLR Bit Fields */
+#define PMU_REG_1P0D_CLR_ENABLE_LINREG_MASK      0x1u
+#define PMU_REG_1P0D_CLR_ENABLE_LINREG_SHIFT     0
+#define PMU_REG_1P0D_CLR_ENABLE_BO_MASK          0x2u
+#define PMU_REG_1P0D_CLR_ENABLE_BO_SHIFT         1
+#define PMU_REG_1P0D_CLR_ENABLE_ILIMIT_MASK      0x4u
+#define PMU_REG_1P0D_CLR_ENABLE_ILIMIT_SHIFT     2
+#define PMU_REG_1P0D_CLR_ENABLE_PULLDOWN_MASK    0x8u
+#define PMU_REG_1P0D_CLR_ENABLE_PULLDOWN_SHIFT   3
+#define PMU_REG_1P0D_CLR_BO_OFFSET_MASK          0x70u
+#define PMU_REG_1P0D_CLR_BO_OFFSET_SHIFT         4
+#define PMU_REG_1P0D_CLR_BO_OFFSET(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_BO_OFFSET_SHIFT))&PMU_REG_1P0D_CLR_BO_OFFSET_MASK)
+#define PMU_REG_1P0D_CLR_ENABLE_PWRUPLOAD_MASK   0x80u
+#define PMU_REG_1P0D_CLR_ENABLE_PWRUPLOAD_SHIFT  7
+#define PMU_REG_1P0D_CLR_OUTPUT_TRG_MASK         0x1F00u
+#define PMU_REG_1P0D_CLR_OUTPUT_TRG_SHIFT        8
+#define PMU_REG_1P0D_CLR_OUTPUT_TRG(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_1P0D_CLR_OUTPUT_TRG_MASK)
+#define PMU_REG_1P0D_CLR_RSVD0_MASK              0xE000u
+#define PMU_REG_1P0D_CLR_RSVD0_SHIFT             13
+#define PMU_REG_1P0D_CLR_RSVD0(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_RSVD0_SHIFT))&PMU_REG_1P0D_CLR_RSVD0_MASK)
+#define PMU_REG_1P0D_CLR_BO_MASK                 0x10000u
+#define PMU_REG_1P0D_CLR_BO_SHIFT                16
+#define PMU_REG_1P0D_CLR_OK_MASK                 0x20000u
+#define PMU_REG_1P0D_CLR_OK_SHIFT                17
+#define PMU_REG_1P0D_CLR_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_1P0D_CLR_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_1P0D_CLR_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_1P0D_CLR_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_1P0D_CLR_REG_TEST_MASK           0xF00000u
+#define PMU_REG_1P0D_CLR_REG_TEST_SHIFT          20
+#define PMU_REG_1P0D_CLR_REG_TEST(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_REG_TEST_SHIFT))&PMU_REG_1P0D_CLR_REG_TEST_MASK)
+#define PMU_REG_1P0D_CLR_RSVD1_MASK              0x7F000000u
+#define PMU_REG_1P0D_CLR_RSVD1_SHIFT             24
+#define PMU_REG_1P0D_CLR_RSVD1(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_RSVD1_SHIFT))&PMU_REG_1P0D_CLR_RSVD1_MASK)
+#define PMU_REG_1P0D_CLR_OVERRIDE_MASK           0x80000000u
+#define PMU_REG_1P0D_CLR_OVERRIDE_SHIFT          31
+/* REG_1P0D_TOG Bit Fields */
+#define PMU_REG_1P0D_TOG_ENABLE_LINREG_MASK      0x1u
+#define PMU_REG_1P0D_TOG_ENABLE_LINREG_SHIFT     0
+#define PMU_REG_1P0D_TOG_ENABLE_BO_MASK          0x2u
+#define PMU_REG_1P0D_TOG_ENABLE_BO_SHIFT         1
+#define PMU_REG_1P0D_TOG_ENABLE_ILIMIT_MASK      0x4u
+#define PMU_REG_1P0D_TOG_ENABLE_ILIMIT_SHIFT     2
+#define PMU_REG_1P0D_TOG_ENABLE_PULLDOWN_MASK    0x8u
+#define PMU_REG_1P0D_TOG_ENABLE_PULLDOWN_SHIFT   3
+#define PMU_REG_1P0D_TOG_BO_OFFSET_MASK          0x70u
+#define PMU_REG_1P0D_TOG_BO_OFFSET_SHIFT         4
+#define PMU_REG_1P0D_TOG_BO_OFFSET(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_BO_OFFSET_SHIFT))&PMU_REG_1P0D_TOG_BO_OFFSET_MASK)
+#define PMU_REG_1P0D_TOG_ENABLE_PWRUPLOAD_MASK   0x80u
+#define PMU_REG_1P0D_TOG_ENABLE_PWRUPLOAD_SHIFT  7
+#define PMU_REG_1P0D_TOG_OUTPUT_TRG_MASK         0x1F00u
+#define PMU_REG_1P0D_TOG_OUTPUT_TRG_SHIFT        8
+#define PMU_REG_1P0D_TOG_OUTPUT_TRG(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_1P0D_TOG_OUTPUT_TRG_MASK)
+#define PMU_REG_1P0D_TOG_RSVD0_MASK              0xE000u
+#define PMU_REG_1P0D_TOG_RSVD0_SHIFT             13
+#define PMU_REG_1P0D_TOG_RSVD0(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_RSVD0_SHIFT))&PMU_REG_1P0D_TOG_RSVD0_MASK)
+#define PMU_REG_1P0D_TOG_BO_MASK                 0x10000u
+#define PMU_REG_1P0D_TOG_BO_SHIFT                16
+#define PMU_REG_1P0D_TOG_OK_MASK                 0x20000u
+#define PMU_REG_1P0D_TOG_OK_SHIFT                17
+#define PMU_REG_1P0D_TOG_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_1P0D_TOG_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_1P0D_TOG_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_1P0D_TOG_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_1P0D_TOG_REG_TEST_MASK           0xF00000u
+#define PMU_REG_1P0D_TOG_REG_TEST_SHIFT          20
+#define PMU_REG_1P0D_TOG_REG_TEST(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_REG_TEST_SHIFT))&PMU_REG_1P0D_TOG_REG_TEST_MASK)
+#define PMU_REG_1P0D_TOG_RSVD1_MASK              0x7F000000u
+#define PMU_REG_1P0D_TOG_RSVD1_SHIFT             24
+#define PMU_REG_1P0D_TOG_RSVD1(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_RSVD1_SHIFT))&PMU_REG_1P0D_TOG_RSVD1_MASK)
+#define PMU_REG_1P0D_TOG_OVERRIDE_MASK           0x80000000u
+#define PMU_REG_1P0D_TOG_OVERRIDE_SHIFT          31
+/* REG_HSIC_1P2 Bit Fields */
+#define PMU_REG_HSIC_1P2_ENABLE_LINREG_MASK      0x1u
+#define PMU_REG_HSIC_1P2_ENABLE_LINREG_SHIFT     0
+#define PMU_REG_HSIC_1P2_ENABLE_BO_MASK          0x2u
+#define PMU_REG_HSIC_1P2_ENABLE_BO_SHIFT         1
+#define PMU_REG_HSIC_1P2_ENABLE_ILIMIT_MASK      0x4u
+#define PMU_REG_HSIC_1P2_ENABLE_ILIMIT_SHIFT     2
+#define PMU_REG_HSIC_1P2_ENABLE_PULLDOWN_MASK    0x8u
+#define PMU_REG_HSIC_1P2_ENABLE_PULLDOWN_SHIFT   3
+#define PMU_REG_HSIC_1P2_BO_OFFSET_MASK          0x70u
+#define PMU_REG_HSIC_1P2_BO_OFFSET_SHIFT         4
+#define PMU_REG_HSIC_1P2_BO_OFFSET(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_BO_OFFSET_SHIFT))&PMU_REG_HSIC_1P2_BO_OFFSET_MASK)
+#define PMU_REG_HSIC_1P2_ENABLE_PWRUPLOAD_MASK   0x80u
+#define PMU_REG_HSIC_1P2_ENABLE_PWRUPLOAD_SHIFT  7
+#define PMU_REG_HSIC_1P2_OUTPUT_TRG_MASK         0x1F00u
+#define PMU_REG_HSIC_1P2_OUTPUT_TRG_SHIFT        8
+#define PMU_REG_HSIC_1P2_OUTPUT_TRG(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_OUTPUT_TRG_SHIFT))&PMU_REG_HSIC_1P2_OUTPUT_TRG_MASK)
+#define PMU_REG_HSIC_1P2_RSVD0_MASK              0xE000u
+#define PMU_REG_HSIC_1P2_RSVD0_SHIFT             13
+#define PMU_REG_HSIC_1P2_RSVD0(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_RSVD0_SHIFT))&PMU_REG_HSIC_1P2_RSVD0_MASK)
+#define PMU_REG_HSIC_1P2_BO_MASK                 0x10000u
+#define PMU_REG_HSIC_1P2_BO_SHIFT                16
+#define PMU_REG_HSIC_1P2_OK_MASK                 0x20000u
+#define PMU_REG_HSIC_1P2_OK_SHIFT                17
+#define PMU_REG_HSIC_1P2_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_HSIC_1P2_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_HSIC_1P2_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_HSIC_1P2_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_HSIC_1P2_REG_TEST_MASK           0xF00000u
+#define PMU_REG_HSIC_1P2_REG_TEST_SHIFT          20
+#define PMU_REG_HSIC_1P2_REG_TEST(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_REG_TEST_SHIFT))&PMU_REG_HSIC_1P2_REG_TEST_MASK)
+#define PMU_REG_HSIC_1P2_RSVD1_MASK              0x7F000000u
+#define PMU_REG_HSIC_1P2_RSVD1_SHIFT             24
+#define PMU_REG_HSIC_1P2_RSVD1(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_RSVD1_SHIFT))&PMU_REG_HSIC_1P2_RSVD1_MASK)
+#define PMU_REG_HSIC_1P2_OVERRIDE_MASK           0x80000000u
+#define PMU_REG_HSIC_1P2_OVERRIDE_SHIFT          31
+/* REG_HSIC_1P2_SET Bit Fields */
+#define PMU_REG_HSIC_1P2_SET_ENABLE_LINREG_MASK  0x1u
+#define PMU_REG_HSIC_1P2_SET_ENABLE_LINREG_SHIFT 0
+#define PMU_REG_HSIC_1P2_SET_ENABLE_BO_MASK      0x2u
+#define PMU_REG_HSIC_1P2_SET_ENABLE_BO_SHIFT     1
+#define PMU_REG_HSIC_1P2_SET_ENABLE_ILIMIT_MASK  0x4u
+#define PMU_REG_HSIC_1P2_SET_ENABLE_ILIMIT_SHIFT 2
+#define PMU_REG_HSIC_1P2_SET_ENABLE_PULLDOWN_MASK 0x8u
+#define PMU_REG_HSIC_1P2_SET_ENABLE_PULLDOWN_SHIFT 3
+#define PMU_REG_HSIC_1P2_SET_BO_OFFSET_MASK      0x70u
+#define PMU_REG_HSIC_1P2_SET_BO_OFFSET_SHIFT     4
+#define PMU_REG_HSIC_1P2_SET_BO_OFFSET(x)        (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_BO_OFFSET_SHIFT))&PMU_REG_HSIC_1P2_SET_BO_OFFSET_MASK)
+#define PMU_REG_HSIC_1P2_SET_ENABLE_PWRUPLOAD_MASK 0x80u
+#define PMU_REG_HSIC_1P2_SET_ENABLE_PWRUPLOAD_SHIFT 7
+#define PMU_REG_HSIC_1P2_SET_OUTPUT_TRG_MASK     0x1F00u
+#define PMU_REG_HSIC_1P2_SET_OUTPUT_TRG_SHIFT    8
+#define PMU_REG_HSIC_1P2_SET_OUTPUT_TRG(x)       (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_OUTPUT_TRG_SHIFT))&PMU_REG_HSIC_1P2_SET_OUTPUT_TRG_MASK)
+#define PMU_REG_HSIC_1P2_SET_RSVD0_MASK          0xE000u
+#define PMU_REG_HSIC_1P2_SET_RSVD0_SHIFT         13
+#define PMU_REG_HSIC_1P2_SET_RSVD0(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_RSVD0_SHIFT))&PMU_REG_HSIC_1P2_SET_RSVD0_MASK)
+#define PMU_REG_HSIC_1P2_SET_BO_MASK             0x10000u
+#define PMU_REG_HSIC_1P2_SET_BO_SHIFT            16
+#define PMU_REG_HSIC_1P2_SET_OK_MASK             0x20000u
+#define PMU_REG_HSIC_1P2_SET_OK_SHIFT            17
+#define PMU_REG_HSIC_1P2_SET_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_HSIC_1P2_SET_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_HSIC_1P2_SET_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_HSIC_1P2_SET_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_HSIC_1P2_SET_REG_TEST_MASK       0xF00000u
+#define PMU_REG_HSIC_1P2_SET_REG_TEST_SHIFT      20
+#define PMU_REG_HSIC_1P2_SET_REG_TEST(x)         (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_REG_TEST_SHIFT))&PMU_REG_HSIC_1P2_SET_REG_TEST_MASK)
+#define PMU_REG_HSIC_1P2_SET_RSVD1_MASK          0x7F000000u
+#define PMU_REG_HSIC_1P2_SET_RSVD1_SHIFT         24
+#define PMU_REG_HSIC_1P2_SET_RSVD1(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_RSVD1_SHIFT))&PMU_REG_HSIC_1P2_SET_RSVD1_MASK)
+#define PMU_REG_HSIC_1P2_SET_OVERRIDE_MASK       0x80000000u
+#define PMU_REG_HSIC_1P2_SET_OVERRIDE_SHIFT      31
+/* REG_HSIC_1P2_CLR Bit Fields */
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_LINREG_MASK  0x1u
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_LINREG_SHIFT 0
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_BO_MASK      0x2u
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_BO_SHIFT     1
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_ILIMIT_MASK  0x4u
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_ILIMIT_SHIFT 2
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_PULLDOWN_MASK 0x8u
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_PULLDOWN_SHIFT 3
+#define PMU_REG_HSIC_1P2_CLR_BO_OFFSET_MASK      0x70u
+#define PMU_REG_HSIC_1P2_CLR_BO_OFFSET_SHIFT     4
+#define PMU_REG_HSIC_1P2_CLR_BO_OFFSET(x)        (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_BO_OFFSET_SHIFT))&PMU_REG_HSIC_1P2_CLR_BO_OFFSET_MASK)
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_PWRUPLOAD_MASK 0x80u
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_PWRUPLOAD_SHIFT 7
+#define PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG_MASK     0x1F00u
+#define PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG_SHIFT    8
+#define PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG(x)       (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG_MASK)
+#define PMU_REG_HSIC_1P2_CLR_RSVD0_MASK          0xE000u
+#define PMU_REG_HSIC_1P2_CLR_RSVD0_SHIFT         13
+#define PMU_REG_HSIC_1P2_CLR_RSVD0(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_RSVD0_SHIFT))&PMU_REG_HSIC_1P2_CLR_RSVD0_MASK)
+#define PMU_REG_HSIC_1P2_CLR_BO_MASK             0x10000u
+#define PMU_REG_HSIC_1P2_CLR_BO_SHIFT            16
+#define PMU_REG_HSIC_1P2_CLR_OK_MASK             0x20000u
+#define PMU_REG_HSIC_1P2_CLR_OK_SHIFT            17
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_HSIC_1P2_CLR_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_HSIC_1P2_CLR_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_HSIC_1P2_CLR_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_HSIC_1P2_CLR_REG_TEST_MASK       0xF00000u
+#define PMU_REG_HSIC_1P2_CLR_REG_TEST_SHIFT      20
+#define PMU_REG_HSIC_1P2_CLR_REG_TEST(x)         (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_REG_TEST_SHIFT))&PMU_REG_HSIC_1P2_CLR_REG_TEST_MASK)
+#define PMU_REG_HSIC_1P2_CLR_RSVD1_MASK          0x7F000000u
+#define PMU_REG_HSIC_1P2_CLR_RSVD1_SHIFT         24
+#define PMU_REG_HSIC_1P2_CLR_RSVD1(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_RSVD1_SHIFT))&PMU_REG_HSIC_1P2_CLR_RSVD1_MASK)
+#define PMU_REG_HSIC_1P2_CLR_OVERRIDE_MASK       0x80000000u
+#define PMU_REG_HSIC_1P2_CLR_OVERRIDE_SHIFT      31
+/* REG_HSIC_1P2_TOG Bit Fields */
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_LINREG_MASK  0x1u
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_LINREG_SHIFT 0
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_BO_MASK      0x2u
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_BO_SHIFT     1
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_ILIMIT_MASK  0x4u
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_ILIMIT_SHIFT 2
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_PULLDOWN_MASK 0x8u
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_PULLDOWN_SHIFT 3
+#define PMU_REG_HSIC_1P2_TOG_BO_OFFSET_MASK      0x70u
+#define PMU_REG_HSIC_1P2_TOG_BO_OFFSET_SHIFT     4
+#define PMU_REG_HSIC_1P2_TOG_BO_OFFSET(x)        (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_BO_OFFSET_SHIFT))&PMU_REG_HSIC_1P2_TOG_BO_OFFSET_MASK)
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_PWRUPLOAD_MASK 0x80u
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_PWRUPLOAD_SHIFT 7
+#define PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG_MASK     0x1F00u
+#define PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG_SHIFT    8
+#define PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG(x)       (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG_MASK)
+#define PMU_REG_HSIC_1P2_TOG_RSVD0_MASK          0xE000u
+#define PMU_REG_HSIC_1P2_TOG_RSVD0_SHIFT         13
+#define PMU_REG_HSIC_1P2_TOG_RSVD0(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_RSVD0_SHIFT))&PMU_REG_HSIC_1P2_TOG_RSVD0_MASK)
+#define PMU_REG_HSIC_1P2_TOG_BO_MASK             0x10000u
+#define PMU_REG_HSIC_1P2_TOG_BO_SHIFT            16
+#define PMU_REG_HSIC_1P2_TOG_OK_MASK             0x20000u
+#define PMU_REG_HSIC_1P2_TOG_OK_SHIFT            17
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_HSIC_1P2_TOG_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_HSIC_1P2_TOG_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_HSIC_1P2_TOG_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_HSIC_1P2_TOG_REG_TEST_MASK       0xF00000u
+#define PMU_REG_HSIC_1P2_TOG_REG_TEST_SHIFT      20
+#define PMU_REG_HSIC_1P2_TOG_REG_TEST(x)         (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_REG_TEST_SHIFT))&PMU_REG_HSIC_1P2_TOG_REG_TEST_MASK)
+#define PMU_REG_HSIC_1P2_TOG_RSVD1_MASK          0x7F000000u
+#define PMU_REG_HSIC_1P2_TOG_RSVD1_SHIFT         24
+#define PMU_REG_HSIC_1P2_TOG_RSVD1(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_RSVD1_SHIFT))&PMU_REG_HSIC_1P2_TOG_RSVD1_MASK)
+#define PMU_REG_HSIC_1P2_TOG_OVERRIDE_MASK       0x80000000u
+#define PMU_REG_HSIC_1P2_TOG_OVERRIDE_SHIFT      31
+/* REG_LPSR_1P0 Bit Fields */
+#define PMU_REG_LPSR_1P0_ENABLE_LINREG_MASK      0x1u
+#define PMU_REG_LPSR_1P0_ENABLE_LINREG_SHIFT     0
+#define PMU_REG_LPSR_1P0_ENABLE_BO_MASK          0x2u
+#define PMU_REG_LPSR_1P0_ENABLE_BO_SHIFT         1
+#define PMU_REG_LPSR_1P0_ENABLE_ILIMIT_MASK      0x4u
+#define PMU_REG_LPSR_1P0_ENABLE_ILIMIT_SHIFT     2
+#define PMU_REG_LPSR_1P0_ENABLE_PULLDOWN_MASK    0x8u
+#define PMU_REG_LPSR_1P0_ENABLE_PULLDOWN_SHIFT   3
+#define PMU_REG_LPSR_1P0_BO_OFFSET_MASK          0x70u
+#define PMU_REG_LPSR_1P0_BO_OFFSET_SHIFT         4
+#define PMU_REG_LPSR_1P0_BO_OFFSET(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_BO_OFFSET_SHIFT))&PMU_REG_LPSR_1P0_BO_OFFSET_MASK)
+#define PMU_REG_LPSR_1P0_ENABLE_PWRUPLOAD_MASK   0x80u
+#define PMU_REG_LPSR_1P0_ENABLE_PWRUPLOAD_SHIFT  7
+#define PMU_REG_LPSR_1P0_OUTPUT_TRG_MASK         0x1F00u
+#define PMU_REG_LPSR_1P0_OUTPUT_TRG_SHIFT        8
+#define PMU_REG_LPSR_1P0_OUTPUT_TRG(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_OUTPUT_TRG_SHIFT))&PMU_REG_LPSR_1P0_OUTPUT_TRG_MASK)
+#define PMU_REG_LPSR_1P0_RSVD0_MASK              0xE000u
+#define PMU_REG_LPSR_1P0_RSVD0_SHIFT             13
+#define PMU_REG_LPSR_1P0_RSVD0(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_RSVD0_SHIFT))&PMU_REG_LPSR_1P0_RSVD0_MASK)
+#define PMU_REG_LPSR_1P0_BO_MASK                 0x10000u
+#define PMU_REG_LPSR_1P0_BO_SHIFT                16
+#define PMU_REG_LPSR_1P0_OK_MASK                 0x20000u
+#define PMU_REG_LPSR_1P0_OK_SHIFT                17
+#define PMU_REG_LPSR_1P0_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_LPSR_1P0_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_LPSR_1P0_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_LPSR_1P0_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_LPSR_1P0_REG_TEST_MASK           0xF00000u
+#define PMU_REG_LPSR_1P0_REG_TEST_SHIFT          20
+#define PMU_REG_LPSR_1P0_REG_TEST(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_REG_TEST_SHIFT))&PMU_REG_LPSR_1P0_REG_TEST_MASK)
+#define PMU_REG_LPSR_1P0_RSVD1_MASK              0xFF000000u
+#define PMU_REG_LPSR_1P0_RSVD1_SHIFT             24
+#define PMU_REG_LPSR_1P0_RSVD1(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_RSVD1_SHIFT))&PMU_REG_LPSR_1P0_RSVD1_MASK)
+/* REG_LPSR_1P0_SET Bit Fields */
+#define PMU_REG_LPSR_1P0_SET_ENABLE_LINREG_MASK  0x1u
+#define PMU_REG_LPSR_1P0_SET_ENABLE_LINREG_SHIFT 0
+#define PMU_REG_LPSR_1P0_SET_ENABLE_BO_MASK      0x2u
+#define PMU_REG_LPSR_1P0_SET_ENABLE_BO_SHIFT     1
+#define PMU_REG_LPSR_1P0_SET_ENABLE_ILIMIT_MASK  0x4u
+#define PMU_REG_LPSR_1P0_SET_ENABLE_ILIMIT_SHIFT 2
+#define PMU_REG_LPSR_1P0_SET_ENABLE_PULLDOWN_MASK 0x8u
+#define PMU_REG_LPSR_1P0_SET_ENABLE_PULLDOWN_SHIFT 3
+#define PMU_REG_LPSR_1P0_SET_BO_OFFSET_MASK      0x70u
+#define PMU_REG_LPSR_1P0_SET_BO_OFFSET_SHIFT     4
+#define PMU_REG_LPSR_1P0_SET_BO_OFFSET(x)        (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_BO_OFFSET_SHIFT))&PMU_REG_LPSR_1P0_SET_BO_OFFSET_MASK)
+#define PMU_REG_LPSR_1P0_SET_ENABLE_PWRUPLOAD_MASK 0x80u
+#define PMU_REG_LPSR_1P0_SET_ENABLE_PWRUPLOAD_SHIFT 7
+#define PMU_REG_LPSR_1P0_SET_OUTPUT_TRG_MASK     0x1F00u
+#define PMU_REG_LPSR_1P0_SET_OUTPUT_TRG_SHIFT    8
+#define PMU_REG_LPSR_1P0_SET_OUTPUT_TRG(x)       (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_OUTPUT_TRG_SHIFT))&PMU_REG_LPSR_1P0_SET_OUTPUT_TRG_MASK)
+#define PMU_REG_LPSR_1P0_SET_RSVD0_MASK          0xE000u
+#define PMU_REG_LPSR_1P0_SET_RSVD0_SHIFT         13
+#define PMU_REG_LPSR_1P0_SET_RSVD0(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_RSVD0_SHIFT))&PMU_REG_LPSR_1P0_SET_RSVD0_MASK)
+#define PMU_REG_LPSR_1P0_SET_BO_MASK             0x10000u
+#define PMU_REG_LPSR_1P0_SET_BO_SHIFT            16
+#define PMU_REG_LPSR_1P0_SET_OK_MASK             0x20000u
+#define PMU_REG_LPSR_1P0_SET_OK_SHIFT            17
+#define PMU_REG_LPSR_1P0_SET_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_LPSR_1P0_SET_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_LPSR_1P0_SET_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_LPSR_1P0_SET_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_LPSR_1P0_SET_REG_TEST_MASK       0xF00000u
+#define PMU_REG_LPSR_1P0_SET_REG_TEST_SHIFT      20
+#define PMU_REG_LPSR_1P0_SET_REG_TEST(x)         (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_REG_TEST_SHIFT))&PMU_REG_LPSR_1P0_SET_REG_TEST_MASK)
+#define PMU_REG_LPSR_1P0_SET_RSVD1_MASK          0xFF000000u
+#define PMU_REG_LPSR_1P0_SET_RSVD1_SHIFT         24
+#define PMU_REG_LPSR_1P0_SET_RSVD1(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_RSVD1_SHIFT))&PMU_REG_LPSR_1P0_SET_RSVD1_MASK)
+/* REG_LPSR_1P0_CLR Bit Fields */
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_LINREG_MASK  0x1u
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_LINREG_SHIFT 0
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_BO_MASK      0x2u
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_BO_SHIFT     1
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_ILIMIT_MASK  0x4u
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_ILIMIT_SHIFT 2
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_PULLDOWN_MASK 0x8u
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_PULLDOWN_SHIFT 3
+#define PMU_REG_LPSR_1P0_CLR_BO_OFFSET_MASK      0x70u
+#define PMU_REG_LPSR_1P0_CLR_BO_OFFSET_SHIFT     4
+#define PMU_REG_LPSR_1P0_CLR_BO_OFFSET(x)        (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_BO_OFFSET_SHIFT))&PMU_REG_LPSR_1P0_CLR_BO_OFFSET_MASK)
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_PWRUPLOAD_MASK 0x80u
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_PWRUPLOAD_SHIFT 7
+#define PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG_MASK     0x1F00u
+#define PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG_SHIFT    8
+#define PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG(x)       (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG_MASK)
+#define PMU_REG_LPSR_1P0_CLR_RSVD0_MASK          0xE000u
+#define PMU_REG_LPSR_1P0_CLR_RSVD0_SHIFT         13
+#define PMU_REG_LPSR_1P0_CLR_RSVD0(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_RSVD0_SHIFT))&PMU_REG_LPSR_1P0_CLR_RSVD0_MASK)
+#define PMU_REG_LPSR_1P0_CLR_BO_MASK             0x10000u
+#define PMU_REG_LPSR_1P0_CLR_BO_SHIFT            16
+#define PMU_REG_LPSR_1P0_CLR_OK_MASK             0x20000u
+#define PMU_REG_LPSR_1P0_CLR_OK_SHIFT            17
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_LPSR_1P0_CLR_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_LPSR_1P0_CLR_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_LPSR_1P0_CLR_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_LPSR_1P0_CLR_REG_TEST_MASK       0xF00000u
+#define PMU_REG_LPSR_1P0_CLR_REG_TEST_SHIFT      20
+#define PMU_REG_LPSR_1P0_CLR_REG_TEST(x)         (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_REG_TEST_SHIFT))&PMU_REG_LPSR_1P0_CLR_REG_TEST_MASK)
+#define PMU_REG_LPSR_1P0_CLR_RSVD1_MASK          0xFF000000u
+#define PMU_REG_LPSR_1P0_CLR_RSVD1_SHIFT         24
+#define PMU_REG_LPSR_1P0_CLR_RSVD1(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_RSVD1_SHIFT))&PMU_REG_LPSR_1P0_CLR_RSVD1_MASK)
+/* REG_LPSR_1P0_TOG Bit Fields */
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_LINREG_MASK  0x1u
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_LINREG_SHIFT 0
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_BO_MASK      0x2u
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_BO_SHIFT     1
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_ILIMIT_MASK  0x4u
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_ILIMIT_SHIFT 2
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_PULLDOWN_MASK 0x8u
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_PULLDOWN_SHIFT 3
+#define PMU_REG_LPSR_1P0_TOG_BO_OFFSET_MASK      0x70u
+#define PMU_REG_LPSR_1P0_TOG_BO_OFFSET_SHIFT     4
+#define PMU_REG_LPSR_1P0_TOG_BO_OFFSET(x)        (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_BO_OFFSET_SHIFT))&PMU_REG_LPSR_1P0_TOG_BO_OFFSET_MASK)
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_PWRUPLOAD_MASK 0x80u
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_PWRUPLOAD_SHIFT 7
+#define PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG_MASK     0x1F00u
+#define PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG_SHIFT    8
+#define PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG(x)       (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG_MASK)
+#define PMU_REG_LPSR_1P0_TOG_RSVD0_MASK          0xE000u
+#define PMU_REG_LPSR_1P0_TOG_RSVD0_SHIFT         13
+#define PMU_REG_LPSR_1P0_TOG_RSVD0(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_RSVD0_SHIFT))&PMU_REG_LPSR_1P0_TOG_RSVD0_MASK)
+#define PMU_REG_LPSR_1P0_TOG_BO_MASK             0x10000u
+#define PMU_REG_LPSR_1P0_TOG_BO_SHIFT            16
+#define PMU_REG_LPSR_1P0_TOG_OK_MASK             0x20000u
+#define PMU_REG_LPSR_1P0_TOG_OK_SHIFT            17
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_WEAK_LINREG_MASK 0x40000u
+#define PMU_REG_LPSR_1P0_TOG_ENABLE_WEAK_LINREG_SHIFT 18
+#define PMU_REG_LPSR_1P0_TOG_SELREF_WEAK_LINREG_MASK 0x80000u
+#define PMU_REG_LPSR_1P0_TOG_SELREF_WEAK_LINREG_SHIFT 19
+#define PMU_REG_LPSR_1P0_TOG_REG_TEST_MASK       0xF00000u
+#define PMU_REG_LPSR_1P0_TOG_REG_TEST_SHIFT      20
+#define PMU_REG_LPSR_1P0_TOG_REG_TEST(x)         (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_REG_TEST_SHIFT))&PMU_REG_LPSR_1P0_TOG_REG_TEST_MASK)
+#define PMU_REG_LPSR_1P0_TOG_RSVD1_MASK          0xFF000000u
+#define PMU_REG_LPSR_1P0_TOG_RSVD1_SHIFT         24
+#define PMU_REG_LPSR_1P0_TOG_RSVD1(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_RSVD1_SHIFT))&PMU_REG_LPSR_1P0_TOG_RSVD1_MASK)
+/* REG_3P0 Bit Fields */
+#define PMU_REG_3P0_ENABLE_LINREG_MASK           0x1u
+#define PMU_REG_3P0_ENABLE_LINREG_SHIFT          0
+#define PMU_REG_3P0_ENABLE_BO_MASK               0x2u
+#define PMU_REG_3P0_ENABLE_BO_SHIFT              1
+#define PMU_REG_3P0_ENABLE_ILIMIT_MASK           0x4u
+#define PMU_REG_3P0_ENABLE_ILIMIT_SHIFT          2
+#define PMU_REG_3P0_RSVD0_MASK                   0x8u
+#define PMU_REG_3P0_RSVD0_SHIFT                  3
+#define PMU_REG_3P0_BO_OFFSET_MASK               0x70u
+#define PMU_REG_3P0_BO_OFFSET_SHIFT              4
+#define PMU_REG_3P0_BO_OFFSET(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_BO_OFFSET_SHIFT))&PMU_REG_3P0_BO_OFFSET_MASK)
+#define PMU_REG_3P0_VBUS_SEL_MASK                0x80u
+#define PMU_REG_3P0_VBUS_SEL_SHIFT               7
+#define PMU_REG_3P0_OUTPUT_TRG_MASK              0x1F00u
+#define PMU_REG_3P0_OUTPUT_TRG_SHIFT             8
+#define PMU_REG_3P0_OUTPUT_TRG(x)                (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_OUTPUT_TRG_SHIFT))&PMU_REG_3P0_OUTPUT_TRG_MASK)
+#define PMU_REG_3P0_RSVD1_MASK                   0xE000u
+#define PMU_REG_3P0_RSVD1_SHIFT                  13
+#define PMU_REG_3P0_RSVD1(x)                     (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_RSVD1_SHIFT))&PMU_REG_3P0_RSVD1_MASK)
+#define PMU_REG_3P0_BO_VDD3P0_MASK               0x10000u
+#define PMU_REG_3P0_BO_VDD3P0_SHIFT              16
+#define PMU_REG_3P0_OK_VDD3P0_MASK               0x20000u
+#define PMU_REG_3P0_OK_VDD3P0_SHIFT              17
+#define PMU_REG_3P0_REG_TEST_MASK                0x3C0000u
+#define PMU_REG_3P0_REG_TEST_SHIFT               18
+#define PMU_REG_3P0_REG_TEST(x)                  (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_REG_TEST_SHIFT))&PMU_REG_3P0_REG_TEST_MASK)
+#define PMU_REG_3P0_RSVD2_MASK                   0xFFC00000u
+#define PMU_REG_3P0_RSVD2_SHIFT                  22
+#define PMU_REG_3P0_RSVD2(x)                     (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_RSVD2_SHIFT))&PMU_REG_3P0_RSVD2_MASK)
+/* REG_3P0_SET Bit Fields */
+#define PMU_REG_3P0_SET_ENABLE_LINREG_MASK       0x1u
+#define PMU_REG_3P0_SET_ENABLE_LINREG_SHIFT      0
+#define PMU_REG_3P0_SET_ENABLE_BO_MASK           0x2u
+#define PMU_REG_3P0_SET_ENABLE_BO_SHIFT          1
+#define PMU_REG_3P0_SET_ENABLE_ILIMIT_MASK       0x4u
+#define PMU_REG_3P0_SET_ENABLE_ILIMIT_SHIFT      2
+#define PMU_REG_3P0_SET_RSVD0_MASK               0x8u
+#define PMU_REG_3P0_SET_RSVD0_SHIFT              3
+#define PMU_REG_3P0_SET_BO_OFFSET_MASK           0x70u
+#define PMU_REG_3P0_SET_BO_OFFSET_SHIFT          4
+#define PMU_REG_3P0_SET_BO_OFFSET(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_BO_OFFSET_SHIFT))&PMU_REG_3P0_SET_BO_OFFSET_MASK)
+#define PMU_REG_3P0_SET_VBUS_SEL_MASK            0x80u
+#define PMU_REG_3P0_SET_VBUS_SEL_SHIFT           7
+#define PMU_REG_3P0_SET_OUTPUT_TRG_MASK          0x1F00u
+#define PMU_REG_3P0_SET_OUTPUT_TRG_SHIFT         8
+#define PMU_REG_3P0_SET_OUTPUT_TRG(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_OUTPUT_TRG_SHIFT))&PMU_REG_3P0_SET_OUTPUT_TRG_MASK)
+#define PMU_REG_3P0_SET_RSVD1_MASK               0xE000u
+#define PMU_REG_3P0_SET_RSVD1_SHIFT              13
+#define PMU_REG_3P0_SET_RSVD1(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_RSVD1_SHIFT))&PMU_REG_3P0_SET_RSVD1_MASK)
+#define PMU_REG_3P0_SET_BO_VDD3P0_MASK           0x10000u
+#define PMU_REG_3P0_SET_BO_VDD3P0_SHIFT          16
+#define PMU_REG_3P0_SET_OK_VDD3P0_MASK           0x20000u
+#define PMU_REG_3P0_SET_OK_VDD3P0_SHIFT          17
+#define PMU_REG_3P0_SET_REG_TEST_MASK            0x3C0000u
+#define PMU_REG_3P0_SET_REG_TEST_SHIFT           18
+#define PMU_REG_3P0_SET_REG_TEST(x)              (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_REG_TEST_SHIFT))&PMU_REG_3P0_SET_REG_TEST_MASK)
+#define PMU_REG_3P0_SET_RSVD2_MASK               0xFFC00000u
+#define PMU_REG_3P0_SET_RSVD2_SHIFT              22
+#define PMU_REG_3P0_SET_RSVD2(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_RSVD2_SHIFT))&PMU_REG_3P0_SET_RSVD2_MASK)
+/* REG_3P0_CLR Bit Fields */
+#define PMU_REG_3P0_CLR_ENABLE_LINREG_MASK       0x1u
+#define PMU_REG_3P0_CLR_ENABLE_LINREG_SHIFT      0
+#define PMU_REG_3P0_CLR_ENABLE_BO_MASK           0x2u
+#define PMU_REG_3P0_CLR_ENABLE_BO_SHIFT          1
+#define PMU_REG_3P0_CLR_ENABLE_ILIMIT_MASK       0x4u
+#define PMU_REG_3P0_CLR_ENABLE_ILIMIT_SHIFT      2
+#define PMU_REG_3P0_CLR_RSVD0_MASK               0x8u
+#define PMU_REG_3P0_CLR_RSVD0_SHIFT              3
+#define PMU_REG_3P0_CLR_BO_OFFSET_MASK           0x70u
+#define PMU_REG_3P0_CLR_BO_OFFSET_SHIFT          4
+#define PMU_REG_3P0_CLR_BO_OFFSET(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_BO_OFFSET_SHIFT))&PMU_REG_3P0_CLR_BO_OFFSET_MASK)
+#define PMU_REG_3P0_CLR_VBUS_SEL_MASK            0x80u
+#define PMU_REG_3P0_CLR_VBUS_SEL_SHIFT           7
+#define PMU_REG_3P0_CLR_OUTPUT_TRG_MASK          0x1F00u
+#define PMU_REG_3P0_CLR_OUTPUT_TRG_SHIFT         8
+#define PMU_REG_3P0_CLR_OUTPUT_TRG(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_3P0_CLR_OUTPUT_TRG_MASK)
+#define PMU_REG_3P0_CLR_RSVD1_MASK               0xE000u
+#define PMU_REG_3P0_CLR_RSVD1_SHIFT              13
+#define PMU_REG_3P0_CLR_RSVD1(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_RSVD1_SHIFT))&PMU_REG_3P0_CLR_RSVD1_MASK)
+#define PMU_REG_3P0_CLR_BO_VDD3P0_MASK           0x10000u
+#define PMU_REG_3P0_CLR_BO_VDD3P0_SHIFT          16
+#define PMU_REG_3P0_CLR_OK_VDD3P0_MASK           0x20000u
+#define PMU_REG_3P0_CLR_OK_VDD3P0_SHIFT          17
+#define PMU_REG_3P0_CLR_REG_TEST_MASK            0x3C0000u
+#define PMU_REG_3P0_CLR_REG_TEST_SHIFT           18
+#define PMU_REG_3P0_CLR_REG_TEST(x)              (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_REG_TEST_SHIFT))&PMU_REG_3P0_CLR_REG_TEST_MASK)
+#define PMU_REG_3P0_CLR_RSVD2_MASK               0xFFC00000u
+#define PMU_REG_3P0_CLR_RSVD2_SHIFT              22
+#define PMU_REG_3P0_CLR_RSVD2(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_RSVD2_SHIFT))&PMU_REG_3P0_CLR_RSVD2_MASK)
+/* REG_3P0_TOG Bit Fields */
+#define PMU_REG_3P0_TOG_ENABLE_LINREG_MASK       0x1u
+#define PMU_REG_3P0_TOG_ENABLE_LINREG_SHIFT      0
+#define PMU_REG_3P0_TOG_ENABLE_BO_MASK           0x2u
+#define PMU_REG_3P0_TOG_ENABLE_BO_SHIFT          1
+#define PMU_REG_3P0_TOG_ENABLE_ILIMIT_MASK       0x4u
+#define PMU_REG_3P0_TOG_ENABLE_ILIMIT_SHIFT      2
+#define PMU_REG_3P0_TOG_RSVD0_MASK               0x8u
+#define PMU_REG_3P0_TOG_RSVD0_SHIFT              3
+#define PMU_REG_3P0_TOG_BO_OFFSET_MASK           0x70u
+#define PMU_REG_3P0_TOG_BO_OFFSET_SHIFT          4
+#define PMU_REG_3P0_TOG_BO_OFFSET(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_BO_OFFSET_SHIFT))&PMU_REG_3P0_TOG_BO_OFFSET_MASK)
+#define PMU_REG_3P0_TOG_VBUS_SEL_MASK            0x80u
+#define PMU_REG_3P0_TOG_VBUS_SEL_SHIFT           7
+#define PMU_REG_3P0_TOG_OUTPUT_TRG_MASK          0x1F00u
+#define PMU_REG_3P0_TOG_OUTPUT_TRG_SHIFT         8
+#define PMU_REG_3P0_TOG_OUTPUT_TRG(x)            (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_3P0_TOG_OUTPUT_TRG_MASK)
+#define PMU_REG_3P0_TOG_RSVD1_MASK               0xE000u
+#define PMU_REG_3P0_TOG_RSVD1_SHIFT              13
+#define PMU_REG_3P0_TOG_RSVD1(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_RSVD1_SHIFT))&PMU_REG_3P0_TOG_RSVD1_MASK)
+#define PMU_REG_3P0_TOG_BO_VDD3P0_MASK           0x10000u
+#define PMU_REG_3P0_TOG_BO_VDD3P0_SHIFT          16
+#define PMU_REG_3P0_TOG_OK_VDD3P0_MASK           0x20000u
+#define PMU_REG_3P0_TOG_OK_VDD3P0_SHIFT          17
+#define PMU_REG_3P0_TOG_REG_TEST_MASK            0x3C0000u
+#define PMU_REG_3P0_TOG_REG_TEST_SHIFT           18
+#define PMU_REG_3P0_TOG_REG_TEST(x)              (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_REG_TEST_SHIFT))&PMU_REG_3P0_TOG_REG_TEST_MASK)
+#define PMU_REG_3P0_TOG_RSVD2_MASK               0xFFC00000u
+#define PMU_REG_3P0_TOG_RSVD2_SHIFT              22
+#define PMU_REG_3P0_TOG_RSVD2(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_RSVD2_SHIFT))&PMU_REG_3P0_TOG_RSVD2_MASK)
+/* REF Bit Fields */
+#define PMU_REF_REFTOP_PWD_MASK                  0x1u
+#define PMU_REF_REFTOP_PWD_SHIFT                 0
+#define PMU_REF_REFTOP_PWDVBGUP_MASK             0x2u
+#define PMU_REF_REFTOP_PWDVBGUP_SHIFT            1
+#define PMU_REF_REFTOP_LOWPOWER_MASK             0x4u
+#define PMU_REF_REFTOP_LOWPOWER_SHIFT            2
+#define PMU_REF_REFTOP_SELFBIASOFF_MASK          0x8u
+#define PMU_REF_REFTOP_SELFBIASOFF_SHIFT         3
+#define PMU_REF_REFTOP_VBGADJ_MASK               0x70u
+#define PMU_REF_REFTOP_VBGADJ_SHIFT              4
+#define PMU_REF_REFTOP_VBGADJ(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_REF_REFTOP_VBGADJ_SHIFT))&PMU_REF_REFTOP_VBGADJ_MASK)
+#define PMU_REF_REFTOP_VBGUP_MASK                0x80u
+#define PMU_REF_REFTOP_VBGUP_SHIFT               7
+#define PMU_REF_REFTOP_BIAS_TST_MASK             0x300u
+#define PMU_REF_REFTOP_BIAS_TST_SHIFT            8
+#define PMU_REF_REFTOP_BIAS_TST(x)               (((uint32_t)(((uint32_t)(x))<<PMU_REF_REFTOP_BIAS_TST_SHIFT))&PMU_REF_REFTOP_BIAS_TST_MASK)
+#define PMU_REF_LPBG_SEL_MASK                    0x400u
+#define PMU_REF_LPBG_SEL_SHIFT                   10
+#define PMU_REF_LPBG_TEST_MASK                   0x800u
+#define PMU_REF_LPBG_TEST_SHIFT                  11
+#define PMU_REF_REFTOP_IBIAS_OFF_MASK            0x1000u
+#define PMU_REF_REFTOP_IBIAS_OFF_SHIFT           12
+#define PMU_REF_REFTOP_LINREGREF_EN_MASK         0x2000u
+#define PMU_REF_REFTOP_LINREGREF_EN_SHIFT        13
+#define PMU_REF_RSVD1_MASK                       0xFFFFC000u
+#define PMU_REF_RSVD1_SHIFT                      14
+#define PMU_REF_RSVD1(x)                         (((uint32_t)(((uint32_t)(x))<<PMU_REF_RSVD1_SHIFT))&PMU_REF_RSVD1_MASK)
+/* REF_SET Bit Fields */
+#define PMU_REF_SET_REFTOP_PWD_MASK              0x1u
+#define PMU_REF_SET_REFTOP_PWD_SHIFT             0
+#define PMU_REF_SET_REFTOP_PWDVBGUP_MASK         0x2u
+#define PMU_REF_SET_REFTOP_PWDVBGUP_SHIFT        1
+#define PMU_REF_SET_REFTOP_LOWPOWER_MASK         0x4u
+#define PMU_REF_SET_REFTOP_LOWPOWER_SHIFT        2
+#define PMU_REF_SET_REFTOP_SELFBIASOFF_MASK      0x8u
+#define PMU_REF_SET_REFTOP_SELFBIASOFF_SHIFT     3
+#define PMU_REF_SET_REFTOP_VBGADJ_MASK           0x70u
+#define PMU_REF_SET_REFTOP_VBGADJ_SHIFT          4
+#define PMU_REF_SET_REFTOP_VBGADJ(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REF_SET_REFTOP_VBGADJ_SHIFT))&PMU_REF_SET_REFTOP_VBGADJ_MASK)
+#define PMU_REF_SET_REFTOP_VBGUP_MASK            0x80u
+#define PMU_REF_SET_REFTOP_VBGUP_SHIFT           7
+#define PMU_REF_SET_REFTOP_BIAS_TST_MASK         0x300u
+#define PMU_REF_SET_REFTOP_BIAS_TST_SHIFT        8
+#define PMU_REF_SET_REFTOP_BIAS_TST(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REF_SET_REFTOP_BIAS_TST_SHIFT))&PMU_REF_SET_REFTOP_BIAS_TST_MASK)
+#define PMU_REF_SET_LPBG_SEL_MASK                0x400u
+#define PMU_REF_SET_LPBG_SEL_SHIFT               10
+#define PMU_REF_SET_LPBG_TEST_MASK               0x800u
+#define PMU_REF_SET_LPBG_TEST_SHIFT              11
+#define PMU_REF_SET_REFTOP_IBIAS_OFF_MASK        0x1000u
+#define PMU_REF_SET_REFTOP_IBIAS_OFF_SHIFT       12
+#define PMU_REF_SET_REFTOP_LINREGREF_EN_MASK     0x2000u
+#define PMU_REF_SET_REFTOP_LINREGREF_EN_SHIFT    13
+#define PMU_REF_SET_RSVD1_MASK                   0xFFFFC000u
+#define PMU_REF_SET_RSVD1_SHIFT                  14
+#define PMU_REF_SET_RSVD1(x)                     (((uint32_t)(((uint32_t)(x))<<PMU_REF_SET_RSVD1_SHIFT))&PMU_REF_SET_RSVD1_MASK)
+/* REF_CLR Bit Fields */
+#define PMU_REF_CLR_REFTOP_PWD_MASK              0x1u
+#define PMU_REF_CLR_REFTOP_PWD_SHIFT             0
+#define PMU_REF_CLR_REFTOP_PWDVBGUP_MASK         0x2u
+#define PMU_REF_CLR_REFTOP_PWDVBGUP_SHIFT        1
+#define PMU_REF_CLR_REFTOP_LOWPOWER_MASK         0x4u
+#define PMU_REF_CLR_REFTOP_LOWPOWER_SHIFT        2
+#define PMU_REF_CLR_REFTOP_SELFBIASOFF_MASK      0x8u
+#define PMU_REF_CLR_REFTOP_SELFBIASOFF_SHIFT     3
+#define PMU_REF_CLR_REFTOP_VBGADJ_MASK           0x70u
+#define PMU_REF_CLR_REFTOP_VBGADJ_SHIFT          4
+#define PMU_REF_CLR_REFTOP_VBGADJ(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REF_CLR_REFTOP_VBGADJ_SHIFT))&PMU_REF_CLR_REFTOP_VBGADJ_MASK)
+#define PMU_REF_CLR_REFTOP_VBGUP_MASK            0x80u
+#define PMU_REF_CLR_REFTOP_VBGUP_SHIFT           7
+#define PMU_REF_CLR_REFTOP_BIAS_TST_MASK         0x300u
+#define PMU_REF_CLR_REFTOP_BIAS_TST_SHIFT        8
+#define PMU_REF_CLR_REFTOP_BIAS_TST(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REF_CLR_REFTOP_BIAS_TST_SHIFT))&PMU_REF_CLR_REFTOP_BIAS_TST_MASK)
+#define PMU_REF_CLR_LPBG_SEL_MASK                0x400u
+#define PMU_REF_CLR_LPBG_SEL_SHIFT               10
+#define PMU_REF_CLR_LPBG_TEST_MASK               0x800u
+#define PMU_REF_CLR_LPBG_TEST_SHIFT              11
+#define PMU_REF_CLR_REFTOP_IBIAS_OFF_MASK        0x1000u
+#define PMU_REF_CLR_REFTOP_IBIAS_OFF_SHIFT       12
+#define PMU_REF_CLR_REFTOP_LINREGREF_EN_MASK     0x2000u
+#define PMU_REF_CLR_REFTOP_LINREGREF_EN_SHIFT    13
+#define PMU_REF_CLR_RSVD1_MASK                   0xFFFFC000u
+#define PMU_REF_CLR_RSVD1_SHIFT                  14
+#define PMU_REF_CLR_RSVD1(x)                     (((uint32_t)(((uint32_t)(x))<<PMU_REF_CLR_RSVD1_SHIFT))&PMU_REF_CLR_RSVD1_MASK)
+/* REF_TOG Bit Fields */
+#define PMU_REF_TOG_REFTOP_PWD_MASK              0x1u
+#define PMU_REF_TOG_REFTOP_PWD_SHIFT             0
+#define PMU_REF_TOG_REFTOP_PWDVBGUP_MASK         0x2u
+#define PMU_REF_TOG_REFTOP_PWDVBGUP_SHIFT        1
+#define PMU_REF_TOG_REFTOP_LOWPOWER_MASK         0x4u
+#define PMU_REF_TOG_REFTOP_LOWPOWER_SHIFT        2
+#define PMU_REF_TOG_REFTOP_SELFBIASOFF_MASK      0x8u
+#define PMU_REF_TOG_REFTOP_SELFBIASOFF_SHIFT     3
+#define PMU_REF_TOG_REFTOP_VBGADJ_MASK           0x70u
+#define PMU_REF_TOG_REFTOP_VBGADJ_SHIFT          4
+#define PMU_REF_TOG_REFTOP_VBGADJ(x)             (((uint32_t)(((uint32_t)(x))<<PMU_REF_TOG_REFTOP_VBGADJ_SHIFT))&PMU_REF_TOG_REFTOP_VBGADJ_MASK)
+#define PMU_REF_TOG_REFTOP_VBGUP_MASK            0x80u
+#define PMU_REF_TOG_REFTOP_VBGUP_SHIFT           7
+#define PMU_REF_TOG_REFTOP_BIAS_TST_MASK         0x300u
+#define PMU_REF_TOG_REFTOP_BIAS_TST_SHIFT        8
+#define PMU_REF_TOG_REFTOP_BIAS_TST(x)           (((uint32_t)(((uint32_t)(x))<<PMU_REF_TOG_REFTOP_BIAS_TST_SHIFT))&PMU_REF_TOG_REFTOP_BIAS_TST_MASK)
+#define PMU_REF_TOG_LPBG_SEL_MASK                0x400u
+#define PMU_REF_TOG_LPBG_SEL_SHIFT               10
+#define PMU_REF_TOG_LPBG_TEST_MASK               0x800u
+#define PMU_REF_TOG_LPBG_TEST_SHIFT              11
+#define PMU_REF_TOG_REFTOP_IBIAS_OFF_MASK        0x1000u
+#define PMU_REF_TOG_REFTOP_IBIAS_OFF_SHIFT       12
+#define PMU_REF_TOG_REFTOP_LINREGREF_EN_MASK     0x2000u
+#define PMU_REF_TOG_REFTOP_LINREGREF_EN_SHIFT    13
+#define PMU_REF_TOG_RSVD1_MASK                   0xFFFFC000u
+#define PMU_REF_TOG_RSVD1_SHIFT                  14
+#define PMU_REF_TOG_RSVD1(x)                     (((uint32_t)(((uint32_t)(x))<<PMU_REF_TOG_RSVD1_SHIFT))&PMU_REF_TOG_RSVD1_MASK)
+/* LOWPWR_CTRL Bit Fields */
+#define PMU_LOWPWR_CTRL_STOP_MODE_CONFIG_MASK    0x3u
+#define PMU_LOWPWR_CTRL_STOP_MODE_CONFIG_SHIFT   0
+#define PMU_LOWPWR_CTRL_STOP_MODE_CONFIG(x)      (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_STOP_MODE_CONFIG_SHIFT))&PMU_LOWPWR_CTRL_STOP_MODE_CONFIG_MASK)
+#define PMU_LOWPWR_CTRL_RSVD0_MASK               0xFCu
+#define PMU_LOWPWR_CTRL_RSVD0_SHIFT              2
+#define PMU_LOWPWR_CTRL_RSVD0(x)                 (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_RSVD0_SHIFT))&PMU_LOWPWR_CTRL_RSVD0_MASK)
+#define PMU_LOWPWR_CTRL_L1_PWRGATE_MASK          0x100u
+#define PMU_LOWPWR_CTRL_L1_PWRGATE_SHIFT         8
+#define PMU_LOWPWR_CTRL_L2_PWRGATE_MASK          0x200u
+#define PMU_LOWPWR_CTRL_L2_PWRGATE_SHIFT         9
+#define PMU_LOWPWR_CTRL_CPU_PWRGATE_MASK         0x400u
+#define PMU_LOWPWR_CTRL_CPU_PWRGATE_SHIFT        10
+#define PMU_LOWPWR_CTRL_DISPLAY_PWRGATE_MASK     0x800u
+#define PMU_LOWPWR_CTRL_DISPLAY_PWRGATE_SHIFT    11
+#define PMU_LOWPWR_CTRL_MIX_PWRGATE_MASK         0x1000u
+#define PMU_LOWPWR_CTRL_MIX_PWRGATE_SHIFT        12
+#define PMU_LOWPWR_CTRL_GPU_PWRGATE_MASK         0x2000u
+#define PMU_LOWPWR_CTRL_GPU_PWRGATE_SHIFT        13
+#define PMU_LOWPWR_CTRL_CONTROL0_MASK            0xFFC000u
+#define PMU_LOWPWR_CTRL_CONTROL0_SHIFT           14
+#define PMU_LOWPWR_CTRL_CONTROL0(x)              (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CONTROL0_SHIFT))&PMU_LOWPWR_CTRL_CONTROL0_MASK)
+#define PMU_LOWPWR_CTRL_CONTROL1_MASK            0xFF000000u
+#define PMU_LOWPWR_CTRL_CONTROL1_SHIFT           24
+#define PMU_LOWPWR_CTRL_CONTROL1(x)              (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CONTROL1_SHIFT))&PMU_LOWPWR_CTRL_CONTROL1_MASK)
+/* LOWPWR_CTRL_SET Bit Fields */
+#define PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG_MASK 0x3u
+#define PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG_SHIFT 0
+#define PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG(x)  (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG_SHIFT))&PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG_MASK)
+#define PMU_LOWPWR_CTRL_SET_RSVD0_MASK           0xFCu
+#define PMU_LOWPWR_CTRL_SET_RSVD0_SHIFT          2
+#define PMU_LOWPWR_CTRL_SET_RSVD0(x)             (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_SET_RSVD0_SHIFT))&PMU_LOWPWR_CTRL_SET_RSVD0_MASK)
+#define PMU_LOWPWR_CTRL_SET_L1_PWRGATE_MASK      0x100u
+#define PMU_LOWPWR_CTRL_SET_L1_PWRGATE_SHIFT     8
+#define PMU_LOWPWR_CTRL_SET_L2_PWRGATE_MASK      0x200u
+#define PMU_LOWPWR_CTRL_SET_L2_PWRGATE_SHIFT     9
+#define PMU_LOWPWR_CTRL_SET_CPU_PWRGATE_MASK     0x400u
+#define PMU_LOWPWR_CTRL_SET_CPU_PWRGATE_SHIFT    10
+#define PMU_LOWPWR_CTRL_SET_DISPLAY_PWRGATE_MASK 0x800u
+#define PMU_LOWPWR_CTRL_SET_DISPLAY_PWRGATE_SHIFT 11
+#define PMU_LOWPWR_CTRL_SET_MIX_PWRGATE_MASK     0x1000u
+#define PMU_LOWPWR_CTRL_SET_MIX_PWRGATE_SHIFT    12
+#define PMU_LOWPWR_CTRL_SET_GPU_PWRGATE_MASK     0x2000u
+#define PMU_LOWPWR_CTRL_SET_GPU_PWRGATE_SHIFT    13
+#define PMU_LOWPWR_CTRL_SET_CONTROL0_MASK        0xFFC000u
+#define PMU_LOWPWR_CTRL_SET_CONTROL0_SHIFT       14
+#define PMU_LOWPWR_CTRL_SET_CONTROL0(x)          (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_SET_CONTROL0_SHIFT))&PMU_LOWPWR_CTRL_SET_CONTROL0_MASK)
+#define PMU_LOWPWR_CTRL_SET_CONTROL1_MASK        0xFF000000u
+#define PMU_LOWPWR_CTRL_SET_CONTROL1_SHIFT       24
+#define PMU_LOWPWR_CTRL_SET_CONTROL1(x)          (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_SET_CONTROL1_SHIFT))&PMU_LOWPWR_CTRL_SET_CONTROL1_MASK)
+/* LOWPWR_CTRL_CLR Bit Fields */
+#define PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG_MASK 0x3u
+#define PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG_SHIFT 0
+#define PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG(x)  (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG_SHIFT))&PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG_MASK)
+#define PMU_LOWPWR_CTRL_CLR_RSVD0_MASK           0xFCu
+#define PMU_LOWPWR_CTRL_CLR_RSVD0_SHIFT          2
+#define PMU_LOWPWR_CTRL_CLR_RSVD0(x)             (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CLR_RSVD0_SHIFT))&PMU_LOWPWR_CTRL_CLR_RSVD0_MASK)
+#define PMU_LOWPWR_CTRL_CLR_L1_PWRGATE_MASK      0x100u
+#define PMU_LOWPWR_CTRL_CLR_L1_PWRGATE_SHIFT     8
+#define PMU_LOWPWR_CTRL_CLR_L2_PWRGATE_MASK      0x200u
+#define PMU_LOWPWR_CTRL_CLR_L2_PWRGATE_SHIFT     9
+#define PMU_LOWPWR_CTRL_CLR_CPU_PWRGATE_MASK     0x400u
+#define PMU_LOWPWR_CTRL_CLR_CPU_PWRGATE_SHIFT    10
+#define PMU_LOWPWR_CTRL_CLR_DISPLAY_PWRGATE_MASK 0x800u
+#define PMU_LOWPWR_CTRL_CLR_DISPLAY_PWRGATE_SHIFT 11
+#define PMU_LOWPWR_CTRL_CLR_MIX_PWRGATE_MASK     0x1000u
+#define PMU_LOWPWR_CTRL_CLR_MIX_PWRGATE_SHIFT    12
+#define PMU_LOWPWR_CTRL_CLR_GPU_PWRGATE_MASK     0x2000u
+#define PMU_LOWPWR_CTRL_CLR_GPU_PWRGATE_SHIFT    13
+#define PMU_LOWPWR_CTRL_CLR_CONTROL0_MASK        0xFFC000u
+#define PMU_LOWPWR_CTRL_CLR_CONTROL0_SHIFT       14
+#define PMU_LOWPWR_CTRL_CLR_CONTROL0(x)          (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CLR_CONTROL0_SHIFT))&PMU_LOWPWR_CTRL_CLR_CONTROL0_MASK)
+#define PMU_LOWPWR_CTRL_CLR_CONTROL1_MASK        0xFF000000u
+#define PMU_LOWPWR_CTRL_CLR_CONTROL1_SHIFT       24
+#define PMU_LOWPWR_CTRL_CLR_CONTROL1(x)          (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CLR_CONTROL1_SHIFT))&PMU_LOWPWR_CTRL_CLR_CONTROL1_MASK)
+/* LOWPWR_CTRL_TOG Bit Fields */
+#define PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG_MASK 0x3u
+#define PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG_SHIFT 0
+#define PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG(x)  (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG_SHIFT))&PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG_MASK)
+#define PMU_LOWPWR_CTRL_TOG_RSVD0_MASK           0xFCu
+#define PMU_LOWPWR_CTRL_TOG_RSVD0_SHIFT          2
+#define PMU_LOWPWR_CTRL_TOG_RSVD0(x)             (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_TOG_RSVD0_SHIFT))&PMU_LOWPWR_CTRL_TOG_RSVD0_MASK)
+#define PMU_LOWPWR_CTRL_TOG_L1_PWRGATE_MASK      0x100u
+#define PMU_LOWPWR_CTRL_TOG_L1_PWRGATE_SHIFT     8
+#define PMU_LOWPWR_CTRL_TOG_L2_PWRGATE_MASK      0x200u
+#define PMU_LOWPWR_CTRL_TOG_L2_PWRGATE_SHIFT     9
+#define PMU_LOWPWR_CTRL_TOG_CPU_PWRGATE_MASK     0x400u
+#define PMU_LOWPWR_CTRL_TOG_CPU_PWRGATE_SHIFT    10
+#define PMU_LOWPWR_CTRL_TOG_DISPLAY_PWRGATE_MASK 0x800u
+#define PMU_LOWPWR_CTRL_TOG_DISPLAY_PWRGATE_SHIFT 11
+#define PMU_LOWPWR_CTRL_TOG_MIX_PWRGATE_MASK     0x1000u
+#define PMU_LOWPWR_CTRL_TOG_MIX_PWRGATE_SHIFT    12
+#define PMU_LOWPWR_CTRL_TOG_GPU_PWRGATE_MASK     0x2000u
+#define PMU_LOWPWR_CTRL_TOG_GPU_PWRGATE_SHIFT    13
+#define PMU_LOWPWR_CTRL_TOG_CONTROL0_MASK        0xFFC000u
+#define PMU_LOWPWR_CTRL_TOG_CONTROL0_SHIFT       14
+#define PMU_LOWPWR_CTRL_TOG_CONTROL0(x)          (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_TOG_CONTROL0_SHIFT))&PMU_LOWPWR_CTRL_TOG_CONTROL0_MASK)
+#define PMU_LOWPWR_CTRL_TOG_CONTROL1_MASK        0xFF000000u
+#define PMU_LOWPWR_CTRL_TOG_CONTROL1_SHIFT       24
+#define PMU_LOWPWR_CTRL_TOG_CONTROL1(x)          (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_TOG_CONTROL1_SHIFT))&PMU_LOWPWR_CTRL_TOG_CONTROL1_MASK)
+
+
+/* HW_ANADIG_TEMPSENSE0 Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE_MASK 0x1FFu
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE_MASK 0x3FE00u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE_SHIFT 9
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE_MASK 0x7FC0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE_SHIFT 18
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1_MASK  0xF8000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1_SHIFT 27
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1(x)    (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1_MASK)
+/* HW_ANADIG_TEMPSENSE0_SET Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE_MASK 0x1FFu
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE_MASK 0x3FE00u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE_SHIFT 9
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE_MASK 0x7FC0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE_SHIFT 18
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1_MASK 0xF8000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1_SHIFT 27
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1_MASK)
+/* HW_ANADIG_TEMPSENSE0_CLR Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE_MASK 0x1FFu
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE_MASK 0x3FE00u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE_SHIFT 9
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE_MASK 0x7FC0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE_SHIFT 18
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1_MASK 0xF8000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1_SHIFT 27
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1_MASK)
+/* HW_ANADIG_TEMPSENSE0_TOG Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE_MASK 0x1FFu
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE_MASK 0x3FE00u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE_SHIFT 9
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE_MASK 0x7FC0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE_SHIFT 18
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1_MASK 0xF8000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1_SHIFT 27
+#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1_MASK)
+/* HW_ANADIG_TEMPSENSE1 Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK 0x1FFu
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK 0x200u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_SHIFT 9
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK 0x400u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_SHIFT 10
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK 0x800u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_SHIFT 11
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0_MASK  0xF000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0_SHIFT 12
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0(x)    (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_MASK 0xFFFF0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_SHIFT 16
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_MASK)
+/* HW_ANADIG_TEMPSENSE1_SET Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE_MASK 0x1FFu
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_POWER_DOWN_MASK 0x200u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_POWER_DOWN_SHIFT 9
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_TEMP_MASK 0x400u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_TEMP_SHIFT 10
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_FINISHED_MASK 0x800u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_FINISHED_SHIFT 11
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0_MASK 0xF000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0_SHIFT 12
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ_MASK 0xFFFF0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ_SHIFT 16
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ_MASK)
+/* HW_ANADIG_TEMPSENSE1_CLR Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE_MASK 0x1FFu
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_POWER_DOWN_MASK 0x200u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_POWER_DOWN_SHIFT 9
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_TEMP_MASK 0x400u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_TEMP_SHIFT 10
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_FINISHED_MASK 0x800u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_FINISHED_SHIFT 11
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0_MASK 0xF000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0_SHIFT 12
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ_MASK 0xFFFF0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ_SHIFT 16
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ_MASK)
+/* HW_ANADIG_TEMPSENSE1_TOG Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE_MASK 0x1FFu
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_POWER_DOWN_MASK 0x200u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_POWER_DOWN_SHIFT 9
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_TEMP_MASK 0x400u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_TEMP_SHIFT 10
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_FINISHED_MASK 0x800u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_FINISHED_SHIFT 11
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0_MASK 0xF000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0_SHIFT 12
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ_MASK 0xFFFF0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ_SHIFT 16
+#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ_MASK)
+/* HW_ANADIG_TEMPSENSE_TRIM Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL_MASK 0x1Fu
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0_MASK 0x60u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0_SHIFT 5
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_EN_READ_MASK 0x80u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_EN_READ_SHIFT 7
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL_MASK 0x1FF00u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL_SHIFT 8
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1_MASK 0xE0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1_SHIFT 17
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL_MASK 0xF00000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL_SHIFT 20
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2_MASK 0x1F000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2_SHIFT 24
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR_MASK 0xE0000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR_SHIFT 29
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR_MASK)
+/* HW_ANADIG_TEMPSENSE_TRIM_SET Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL_MASK 0x1Fu
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0_MASK 0x60u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0_SHIFT 5
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_EN_READ_MASK 0x80u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_EN_READ_SHIFT 7
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL_MASK 0x1FF00u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL_SHIFT 8
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1_MASK 0xE0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1_SHIFT 17
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL_MASK 0xF00000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL_SHIFT 20
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2_MASK 0x1F000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2_SHIFT 24
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR_MASK 0xE0000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR_SHIFT 29
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR_MASK)
+/* HW_ANADIG_TEMPSENSE_TRIM_CLR Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL_MASK 0x1Fu
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0_MASK 0x60u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0_SHIFT 5
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_EN_READ_MASK 0x80u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_EN_READ_SHIFT 7
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL_MASK 0x1FF00u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL_SHIFT 8
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1_MASK 0xE0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1_SHIFT 17
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL_MASK 0xF00000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL_SHIFT 20
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2_MASK 0x1F000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2_SHIFT 24
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR_MASK 0xE0000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR_SHIFT 29
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR_MASK)
+/* HW_ANADIG_TEMPSENSE_TRIM_TOG Bit Fields */
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL_MASK 0x1Fu
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL_SHIFT 0
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0_MASK 0x60u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0_SHIFT 5
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_EN_READ_MASK 0x80u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_EN_READ_SHIFT 7
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL_MASK 0x1FF00u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL_SHIFT 8
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1_MASK 0xE0000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1_SHIFT 17
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL_MASK 0xF00000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL_SHIFT 20
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2_MASK 0x1F000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2_SHIFT 24
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2_MASK)
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_MASK 0xE0000000u
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_SHIFT 29
+#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_MASK)
+
+
+#define CCM_GPR(i)		(CCM_BASE_ADDR + CCM_GPR0_OFFSET + 0x10 * (i))
+#define CCM_OBSERVE(i)		(CCM_BASE_ADDR + CCM_OBSERVE0_OFFSET + 0x10 * (i))
+#define CCM_SCTRL(i)		(CCM_BASE_ADDR + CCM_SCTRL0_OFFSET + 0x10 * (i))
+#define CCM_CCGR(i)		(CCM_BASE_ADDR + CCM_CCGR0_OFFSET + 0x10 * (i))
+#define CCM_ROOT_TARGET(i)	(CCM_BASE_ADDR + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i))
+
+#define CCM_GPR_SET(i)		(CCM_BASE_ADDR + CCM_GPR0_OFFSET + 0x10 * (i) + 4)
+#define CCM_OBSERVE_SET(i)	(CCM_BASE_ADDR + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 4)
+#define CCM_SCTRL_SET(i)	(CCM_BASE_ADDR + CCM_SCTRL0_OFFSET + 0x10 * (i) + 4)
+#define CCM_CCGR_SET(i)		(CCM_BASE_ADDR + CCM_CCGR0_OFFSET + 0x10 * (i) + 4)
+#define CCM_ROOT_TARGET_SET(i)	(CCM_BASE_ADDR + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 4)
+
+#define CCM_GPR_CLR(i)		(CCM_BASE_ADDR + CCM_GPR0_OFFSET + 0x10 * (i) + 8)
+#define CCM_OBSERVE_CLR(i)	(CCM_BASE_ADDR + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 8)
+#define CCM_SCTRL_CLR(i)	(CCM_BASE_ADDR + CCM_SCTRL0_OFFSET + 0x10 * (i) + 8)
+#define CCM_CCGR_CLR(i)		(CCM_BASE_ADDR + CCM_CCGR0_OFFSET + 0x10 * (i) + 8)
+#define CCM_ROOT_TARGET_CLR(i)	(CCM_BASE_ADDR + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 8)
+
+#define CCM_GPR_TOGGLE(i)	(CCM_BASE_ADDR + CCM_GPR0_OFFSET + 0x10 * (i) + 12)
+#define CCM_OBSERVE_TOGGLE(i)	(CCM_BASE_ADDR + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 12)
+#define CCM_SCTRL_TOGGLE(i)	(CCM_BASE_ADDR + CCM_SCTRL0_OFFSET + 0x10 * (i) + 12)
+#define CCM_CCGR_TOGGLE(i)	(CCM_BASE_ADDR + CCM_CCGR0_OFFSET + 0x10 * (i) + 12)
+#define CCM_ROOT_TARGET_TOGGLE(i)	(CCM_BASE_ADDR + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 12)
+
+#define HW_CCM_GPR_WR(i, v)		writel((v), CCM_GPR(i))
+#define HW_CCM_CCM_OBSERVE_WR(i, v)	writel((v), CCM_OBSERVE(i))
+#define HW_CCM_SCTRL_WR(i, v)		writel((v), CCM_SCTRL(i))
+#define HW_CCM_CCGR_WR(i, v)		writel((v), CCM_CCGR(i))
+#define HW_CCM_ROOT_TARGET_WR(i, v)	writel((v), CCM_ROOT_TARGET(i))
+
+#define HW_CCM_GPR_RD(i)		readl(CCM_GPR(i))
+#define HW_CCM_CCM_OBSERVE_RD(i)	readl(CCM_OBSERVE(i))
+#define HW_CCM_SCTRL_RD(i)		readl(CCM_SCTRL(i))
+#define HW_CCM_CCGR_RD(i)		readl(CCM_CCGR(i))
+#define HW_CCM_ROOT_TARGET_RD(i)	readl(CCM_ROOT_TARGET(i))
+
+#define HW_CCM_GPR_SET(i, v)		writel((v), CCM_GPR_SET(i))
+#define HW_CCM_CCM_OBSERVE_SET(i, v)	writel((v), CCM_CCM_OBSERVE_SET(i))
+#define HW_CCM_SCTRL_SET(i, v)		writel((v), CCM_SCTRL_SET(i))
+#define HW_CCM_CCGR_SET(i, v)		writel((v), CCM_CCGR_SET(i))
+#define HW_CCM_ROOT_TARGET_SET(i, v)	writel((v), CCM_ROOT_TARGET_SET(i))
+
+#define HW_CCM_GPR_CLR(i, v)		writel((v), CCM_GPR_CLR(i))
+#define HW_CCM_CCM_OBSERVE_CLR(i, v)	writel((v), CCM_CCM_OBSERVE_CLR(i))
+#define HW_CCM_SCTRL_CLR(i, v)		writel((v), CCM_SCTRL_CLR(i))
+#define HW_CCM_CCGR_CLR(i, v)		writel((v), CCM_CCGR_CLR(i))
+#define HW_CCM_ROOT_TARGET_CLR(i, v)	writel((v), CCM_ROOT_TARGET_CLR(i))
+
+#define HW_CCM_GPR_TOGGLE(i, v)		writel((v), CCM_GPR_TOGGLE(i))
+#define HW_CCM_CCM_OBSERVE_TOGGLE(i, v)	writel((v), CCM_CCM_OBSERVE_TOGGLE(i))
+#define HW_CCM_SCTRL_TOGGLE(i, v)	writel((v), CCM_SCTRL_TOGGLE(i))
+#define HW_CCM_CCGR_TOGGLE(i, v)	writel((v), CCM_CCGR_TOGGLE(i))
+#define HW_CCM_ROOT_TARGET_TOGGLE(i, v)	writel((v), CCM_ROOT_TARGET_TOGGLE(i))
+
+#define CCM_CLK_ON_MSK	0x03
+#define CCM_CLK_ON_N_N	0x00 /* Domain clocks not needed */
+#define CCM_CLK_ON_R_W	0x02 /* Domain clocks needed when in RUN and WAIT */
+
+/* CCGR Mapping */
+#define CCGR_IDX_DDR 19 /* CCM_CCGR19 */
+
+#define CCM_ROOT_TGT_POST_DIV_SHIFT	0
+#define CCM_ROOT_TGT_PRE_DIV_SHIFT	15
+#define CCM_ROOT_TGT_MUX_SHIFT		24
+#define CCM_ROOT_TGT_ENABLE_SHIFT	28
+#define CCM_ROOT_TGT_POST_DIV_MSK	0x3F
+#define CCM_ROOT_TGT_PRE_DIV_MSK	(0x07 << CCM_ROOT_TGT_PRE_DIV_SHIFT)
+#define CCM_ROOT_TGT_MUX_MSK		(0x07 << CCM_ROOT_TGT_MUX_SHIFT)
+#define CCM_ROOT_TGT_ENABLE_MSK		(0x01 << CCM_ROOT_TGT_ENABLE_SHIFT)
+
+#define CCM_ROOT_TGT_POST_DIV(x)	((((x) - 1) << CCM_ROOT_TGT_POST_DIV_SHIFT) & CCM_ROOT_TGT_POST_DIV_MSK)
+#define CCM_ROOT_TGT_PRE_DIV(x)		((((x) - 1) << CCM_ROOT_TGT_PRE_DIV_SHIFT) & CCM_ROOT_TGT_PRE_DIV_MSK)
+#define CCM_ROOT_TGT_MUX_TO(x)		((((x) - 1) << CCM_ROOT_TGT_MUX_SHIFT) & CCM_ROOT_TGT_MUX_MSK)
+
+/*
+ * Field values definition for clock slice TARGET register
+ */
+
+#define CLK_ROOT_ON		0x10000000
+#define CLK_ROOT_OFF		0x0
+#define CLK_ROOT_ENABLE_MASK	0x10000000
+#define CLK_ROOT_ENABLE_SHIFT	28
+
+#define CLK_ROOT_ALT0		0x00000000
+#define CLK_ROOT_ALT1		0x01000000
+#define CLK_ROOT_ALT2		0x02000000
+#define CLK_ROOT_ALT3		0x03000000
+#define CLK_ROOT_ALT4		0x04000000
+#define CLK_ROOT_ALT5		0x05000000
+#define CLK_ROOT_ALT6		0x06000000
+#define CLK_ROOT_ALT7		0x07000000
+
+
+#define DRAM_CLK_ROOT_POST_DIV_MASK	0x00000007
+#define CLK_ROOT_POST_DIV_MASK	0x0000003f
+#define CLK_ROOT_POST_DIV_SHIFT	0
+#define CLK_ROOT_POST_DIV(n) ((n << CLK_ROOT_POST_DIV_SHIFT) & CLK_ROOT_POST_DIV_MASK)
+
+#define CLK_ROOT_AUTO_DIV_MASK	0x00000700
+#define CLK_ROOT_AUTO_DIV_SHIFT	8
+#define CLK_ROOT_AUTO_DIV(n) ((n << CLK_ROOT_AUTO_DIV_SHIFT) & CLK_ROOT_AUTO_DIV_MASK)
+
+#define CLK_ROOT_AUTO_EN_MASK	0x00001000
+#define CLK_ROOT_AUTO_EN	0x00001000
+
+#define CLK_ROOT_PRE_DIV_MASK	0x00070000
+#define CLK_ROOT_PRE_DIV_SHIFT	16
+#define CLK_ROOT_PRE_DIV(n) ((n << CLK_ROOT_PRE_DIV_SHIFT) & CLK_ROOT_PRE_DIV_MASK)
+
+#define CLK_ROOT_MUX_MASK	0x07000000
+#define CLK_ROOT_MUX_SHIFT	24
+
+#define CLK_ROOT_EN_MASK	0x10000000
+
+#define CLK_ROOT_AUTO_ON	0x00001000
+#define CLK_ROOT_AUTO_OFF	0x0
+
+/* ARM_A7_CLK_ROOT */
+#define ARM_A7_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ARM_A7_CLK_ROOT_FROM_PLL_ARM_MAIN_800M_CLK		0x01000000
+#define ARM_A7_CLK_ROOT_FROM_PLL_DRAM_MAIN_1066M_CLK		0x03000000
+#define ARM_A7_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define ARM_A7_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x05000000
+#define ARM_A7_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x02000000
+#define ARM_A7_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x06000000
+#define ARM_A7_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* ARM_M4_CLK_ROOT */
+#define ARM_M4_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ARM_M4_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x04000000
+#define ARM_M4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define ARM_M4_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x03000000
+#define ARM_M4_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x02000000
+#define ARM_M4_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x05000000
+#define ARM_M4_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x06000000
+#define ARM_M4_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* ARM_M0_CLK_ROOT */
+#define ARM_M0_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ARM_M0_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x04000000
+#define ARM_M0_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x01000000
+#define ARM_M0_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x03000000
+#define ARM_M0_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x02000000
+#define ARM_M0_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x05000000
+#define ARM_M0_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x06000000
+#define ARM_M0_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* MAIN_AXI_CLK_ROOT */
+#define MAIN_AXI_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define MAIN_AXI_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define MAIN_AXI_CLK_ROOT_FROM_PLL_SYS_PFD1_332M_CLK		0x01000000
+#define MAIN_AXI_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK			0x04000000
+#define MAIN_AXI_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define MAIN_AXI_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x03000000
+#define MAIN_AXI_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x05000000
+#define MAIN_AXI_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+
+/* DISP_AXI_CLK_ROOT */
+#define DISP_AXI_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define DISP_AXI_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define DISP_AXI_CLK_ROOT_FROM_PLL_SYS_PFD1_332M_CLK		0x01000000
+#define DISP_AXI_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK			0x04000000
+#define DISP_AXI_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x05000000
+#define DISP_AXI_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x03000000
+#define DISP_AXI_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x06000000
+#define DISP_AXI_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x07000000
+
+/* ENET_AXI_CLK_ROOT */
+#define ENET_AXI_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ENET_AXI_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define ENET_AXI_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x04000000
+#define ENET_AXI_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x01000000
+#define ENET_AXI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x07000000
+#define ENET_AXI_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x03000000
+#define ENET_AXI_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x05000000
+#define ENET_AXI_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+
+/* NAND_USDHC_BUS_CLK_ROOT */
+#define NAND_USDHC_BUS_CLK_ROOT_FROM_OSC_24M_CLK		0x00000000
+#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK	0x02000000
+#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK	0x03000000
+#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK	0x01000000
+#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK	0x04000000
+#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK		0x05000000
+#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK	0x06000000
+#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x07000000
+
+/* AHB_CLK_ROOT */
+#define AHB_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define AHB_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define AHB_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK			0x03000000
+#define AHB_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK			0x01000000
+#define AHB_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x04000000
+#define AHB_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x06000000
+#define AHB_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x07000000
+#define AHB_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK			0x05000000
+
+/* DRAM_PHYM_CLK_ROOT */
+#define DRAM_PHYM_CLK_ROOT_FROM_PLL_DRAM_MAIN_1066M_CLK		0x00000000
+#define DRAM_PHYM_CLK_ROOT_FROM_PLL_DRAM_PHYM_ALT_CLK_ROOT	0x01000000
+
+/* DRAM_CLK_ROOT */
+#define DRAM_CLK_ROOT_FROM_PLL_DRAM_MAIN_1066M_CLK		0x00000000
+#define DRAM_CLK_ROOT_FROM_PLL_DRAM_ALT_CLK_ROOT		0x01000000
+
+/* DRAM_PHYM_ALT_CLK_ROOT */
+#define DRAM_PHYM_ALT_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK	0x01000000
+#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK	0x02000000
+#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK		0x05000000
+#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK	0x03000000
+#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x06000000
+#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x07000000
+#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK	0x04000000
+
+/* DRAM_ALT_CLK_ROOT */
+#define DRAM_ALT_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define DRAM_ALT_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x01000000
+#define DRAM_ALT_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x02000000
+#define DRAM_ALT_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x05000000
+#define DRAM_ALT_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x07000000
+#define DRAM_ALT_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x03000000
+#define DRAM_ALT_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x04000000
+#define DRAM_ALT_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x06000000
+
+/* USB_HSIC_CLK_ROOT */
+#define USB_HSIC_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x01000000
+#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK			0x03000000
+#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x04000000
+#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK			0x05000000
+#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK			0x06000000
+#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define USB_HSIC_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x02000000
+
+/* PCIE_CTRL_CLK_ROOT */
+#define PCIE_CTRL_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define PCIE_CTRL_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x04000000
+#define PCIE_CTRL_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x02000000
+#define PCIE_CTRL_CLK_ROOT_FROM_PLL_SYS_PFD1_332M_CLK		0x06000000
+#define PCIE_CTRL_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x03000000
+#define PCIE_CTRL_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK		0x07000000
+#define PCIE_CTRL_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x05000000
+#define PCIE_CTRL_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x01000000
+
+/* PCIE_PHY_CLK_ROOT */
+#define PCIE_PHY_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define PCIE_PHY_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x07000000
+#define PCIE_PHY_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x02000000
+#define PCIE_PHY_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define PCIE_PHY_CLK_ROOT_FROM_EXT_CLK_1			0x03000000
+#define PCIE_PHY_CLK_ROOT_FROM_EXT_CLK_2			0x04000000
+#define PCIE_PHY_CLK_ROOT_FROM_EXT_CLK_3			0x05000000
+#define PCIE_PHY_CLK_ROOT_FROM_EXT_CLK_4			0x06000000
+
+/* EPDC_PIXEL_CLK_ROOT */
+#define EPDC_PIXEL_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x03000000
+#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD1_332M_CLK		0x01000000
+#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK		0x04000000
+#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK		0x05000000
+#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK		0x06000000
+#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x07000000
+
+/* LCDIF_PIXEL_CLK_ROOT */
+#define LCDIF_PIXEL_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK	0x02000000
+#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x05000000
+#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK		0x04000000
+#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK		0x01000000
+#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+#define LCDIF_PIXEL_CLK_ROOT_FROM_EXT_CLK_3			0x03000000
+
+/* MIPI_DSI_EXTSER_CLK_ROOT */
+#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_OSC_24M_CLK		0x00000000
+#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK	0x05000000
+#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK	0x03000000
+#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_SYS_PFD0_196M_CLK	0x04000000
+#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK		0x02000000
+#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK		0x01000000
+#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK	0x07000000
+#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK	0x06000000
+
+/* MIPI_CSI_WARP_CLK_ROOT */
+#define MIPI_CSI_WARP_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK	0x05000000
+#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK	0x03000000
+#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_SYS_PFD0_196M_CLK	0x04000000
+#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK		0x02000000
+#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK		0x01000000
+#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x07000000
+#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+
+/* MIPI_DPHY_REF_CLK_ROOT */
+#define MIPI_DPHY_REF_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define MIPI_DPHY_REF_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK	0x02000000
+#define MIPI_DPHY_REF_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK	0x01000000
+#define MIPI_DPHY_REF_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK		0x03000000
+#define MIPI_DPHY_REF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+#define MIPI_DPHY_REF_CLK_ROOT_FROM_REF_1M_CLK			0x04000000
+#define MIPI_DPHY_REF_CLK_ROOT_FROM_EXT_CLK_2			0x05000000
+#define MIPI_DPHY_REF_CLK_ROOT_FROM_EXT_CLK_3			0x07000000
+
+/* SAI1_CLK_ROOT */
+#define SAI1_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define SAI1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define SAI1_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define SAI1_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x05000000
+#define SAI1_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x06000000
+#define SAI1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x02000000
+#define SAI1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x04000000
+#define SAI1_CLK_ROOT_FROM_EXT_CLK_2				0x07000000
+
+/* SAI2_CLK_ROOT */
+#define SAI2_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define SAI2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define SAI2_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define SAI2_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x05000000
+#define SAI2_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x06000000
+#define SAI2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x02000000
+#define SAI2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x04000000
+#define SAI2_CLK_ROOT_FROM_EXT_CLK_2				0x07000000
+
+/* SAI3_CLK_ROOT */
+#define SAI3_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define SAI3_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define SAI3_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define SAI3_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x05000000
+#define SAI3_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x06000000
+#define SAI3_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x02000000
+#define SAI3_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x04000000
+#define SAI3_CLK_ROOT_FROM_EXT_CLK_3				0x07000000
+
+/* SPDIF_CLK_ROOT */
+#define SPDIF_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define SPDIF_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define SPDIF_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define SPDIF_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x05000000
+#define SPDIF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x06000000
+#define SPDIF_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x02000000
+#define SPDIF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x04000000
+#define SPDIF_CLK_ROOT_FROM_EXT_CLK_3				0x07000000
+
+/* ENET1_REF_CLK_ROOT */
+#define ENET1_REF_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ENET1_REF_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x04000000
+#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x01000000
+#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK		0x02000000
+#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK		0x03000000
+#define ENET1_REF_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x05000000
+#define ENET1_REF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+#define ENET1_REF_CLK_ROOT_FROM_EXT_CLK_4			0x07000000
+
+/* ENET1_TIME_CLK_ROOT */
+#define ENET1_TIME_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define ENET1_TIME_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x02000000
+#define ENET1_TIME_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x07000000
+#define ENET1_TIME_CLK_ROOT_FROM_EXT_CLK_1			0x03000000
+#define ENET1_TIME_CLK_ROOT_FROM_EXT_CLK_2			0x04000000
+#define ENET1_TIME_CLK_ROOT_FROM_EXT_CLK_3			0x05000000
+#define ENET1_TIME_CLK_ROOT_FROM_EXT_CLK_4			0x06000000
+
+/* ENET2_REF_CLK_ROOT */
+#define ENET2_REF_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ENET2_REF_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x04000000
+#define ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x01000000
+#define ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK		0x02000000
+#define ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK		0x03000000
+#define ENET2_REF_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x05000000
+#define ENET2_REF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+#define ENET2_REF_CLK_ROOT_FROM_EXT_CLK_4			0x07000000
+
+/* ENET2_TIME_CLK_ROOT */
+#define ENET2_TIME_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ENET2_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define ENET2_TIME_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x02000000
+#define ENET2_TIME_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x07000000
+#define ENET2_TIME_CLK_ROOT_FROM_EXT_CLK_1			0x03000000
+#define ENET2_TIME_CLK_ROOT_FROM_EXT_CLK_2			0x04000000
+#define ENET2_TIME_CLK_ROOT_FROM_EXT_CLK_3			0x05000000
+#define ENET2_TIME_CLK_ROOT_FROM_EXT_CLK_4			0x06000000
+
+/* ENET_PHY_REF_CLK_ROOT */
+#define ENET_PHY_REF_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK	0x04000000
+#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK		0x07000000
+#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK	0x03000000
+#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK	0x02000000
+#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK	0x01000000
+#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x05000000
+#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+
+/* EIM_CLK_ROOT */
+#define EIM_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define EIM_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define EIM_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK			0x02000000
+#define EIM_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK			0x04000000
+#define EIM_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK			0x01000000
+#define EIM_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK			0x05000000
+#define EIM_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x06000000
+#define EIM_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK			0x07000000
+
+/* NAND_CLK_ROOT */
+#define NAND_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define NAND_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define NAND_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x01000000
+#define NAND_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x03000000
+#define NAND_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK			0x04000000
+#define NAND_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x05000000
+#define NAND_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x06000000
+#define NAND_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x07000000
+
+/* QSPI_CLK_ROOT */
+#define QSPI_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define QSPI_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x05000000
+#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK			0x04000000
+#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x01000000
+#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK			0x06000000
+#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define QSPI_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x03000000
+
+/* USDHC1_CLK_ROOT */
+#define USDHC1_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define USDHC1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x01000000
+#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x05000000
+#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x04000000
+#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK			0x06000000
+#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define USDHC1_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x03000000
+
+/* USDHC2_CLK_ROOT */
+#define USDHC2_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define USDHC2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x01000000
+#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x05000000
+#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x04000000
+#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK			0x06000000
+#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define USDHC2_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x03000000
+
+/* USDHC3_CLK_ROOT */
+#define USDHC3_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define USDHC3_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x01000000
+#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x05000000
+#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x04000000
+#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK			0x06000000
+#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define USDHC3_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x03000000
+
+/* CAN1_CLK_ROOT */
+#define CAN1_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define CAN1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define CAN1_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x03000000
+#define CAN1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x01000000
+#define CAN1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x04000000
+#define CAN1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x05000000
+#define CAN1_CLK_ROOT_FROM_EXT_CLK_1				0x06000000
+#define CAN1_CLK_ROOT_FROM_EXT_CLK_4				0x07000000
+
+/* CAN2_CLK_ROOT */
+#define CAN2_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define CAN2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define CAN2_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x03000000
+#define CAN2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x01000000
+#define CAN2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x04000000
+#define CAN2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x05000000
+#define CAN2_CLK_ROOT_FROM_EXT_CLK_1				0x06000000
+#define CAN2_CLK_ROOT_FROM_EXT_CLK_3				0x07000000
+
+/* I2C1_CLK_ROOT */
+#define I2C1_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define I2C1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define I2C1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x01000000
+#define I2C1_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x07000000
+#define I2C1_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK		0x02000000
+#define I2C1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x04000000
+#define I2C1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x05000000
+#define I2C1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x06000000
+
+/* I2C2_CLK_ROOT */
+#define I2C2_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define I2C2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define I2C2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x01000000
+#define I2C2_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x07000000
+#define I2C2_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK		0x02000000
+#define I2C2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x04000000
+#define I2C2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x05000000
+#define I2C2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x06000000
+
+/* I2C3_CLK_ROOT */
+#define I2C3_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define I2C3_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define I2C3_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x01000000
+#define I2C3_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x07000000
+#define I2C3_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK		0x02000000
+#define I2C3_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x04000000
+#define I2C3_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x05000000
+#define I2C3_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x06000000
+
+/* I2C4_CLK_ROOT */
+#define I2C4_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define I2C4_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define I2C4_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x01000000
+#define I2C4_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x07000000
+#define I2C4_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK		0x02000000
+#define I2C4_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x04000000
+#define I2C4_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x05000000
+#define I2C4_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x06000000
+
+/* UART1_CLK_ROOT */
+#define UART1_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define UART1_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define UART1_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define UART1_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x03000000
+#define UART1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define UART1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+#define UART1_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+#define UART1_CLK_ROOT_FROM_EXT_CLK_4				0x06000000
+
+/* UART2_CLK_ROOT */
+#define UART2_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define UART2_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define UART2_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define UART2_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x03000000
+#define UART2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define UART2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+#define UART2_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+#define UART2_CLK_ROOT_FROM_EXT_CLK_3				0x06000000
+
+/* UART3_CLK_ROOT */
+#define UART3_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define UART3_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define UART3_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define UART3_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x03000000
+#define UART3_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define UART3_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+#define UART3_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+#define UART3_CLK_ROOT_FROM_EXT_CLK_4				0x06000000
+
+/* UART4_CLK_ROOT */
+#define UART4_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define UART4_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define UART4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define UART4_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x03000000
+#define UART4_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define UART4_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+#define UART4_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+#define UART4_CLK_ROOT_FROM_EXT_CLK_3				0x06000000
+
+/* UART5_CLK_ROOT */
+#define UART5_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define UART5_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define UART5_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define UART5_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x03000000
+#define UART5_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define UART5_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+#define UART5_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+#define UART5_CLK_ROOT_FROM_EXT_CLK_4				0x06000000
+
+/* UART6_CLK_ROOT */
+#define UART6_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define UART6_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define UART6_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define UART6_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x03000000
+#define UART6_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define UART6_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+#define UART6_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+#define UART6_CLK_ROOT_FROM_EXT_CLK_3				0x06000000
+
+/* UART7_CLK_ROOT */
+#define UART7_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define UART7_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define UART7_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define UART7_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x03000000
+#define UART7_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define UART7_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+#define UART7_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+#define UART7_CLK_ROOT_FROM_EXT_CLK_4				0x06000000
+
+/* ECSPI1_CLK_ROOT */
+#define ECSPI1_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x03000000
+#define ECSPI1_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x05000000
+#define ECSPI1_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x06000000
+#define ECSPI1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define ECSPI1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* ECSPI2_CLK_ROOT */
+#define ECSPI2_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x03000000
+#define ECSPI2_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x05000000
+#define ECSPI2_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x06000000
+#define ECSPI2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define ECSPI2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* ECSPI3_CLK_ROOT */
+#define ECSPI3_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x03000000
+#define ECSPI3_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x05000000
+#define ECSPI3_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x06000000
+#define ECSPI3_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define ECSPI3_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* ECSPI4_CLK_ROOT */
+#define ECSPI4_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK		0x04000000
+#define ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x01000000
+#define ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x03000000
+#define ECSPI4_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK			0x05000000
+#define ECSPI4_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK		0x06000000
+#define ECSPI4_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x02000000
+#define ECSPI4_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* PWM1_CLK_ROOT */
+#define PWM1_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define PWM1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define PWM1_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define PWM1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define PWM1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x04000000
+#define PWM1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x07000000
+#define PWM1_CLK_ROOT_FROM_REF_1M_CLK				0x06000000
+#define PWM1_CLK_ROOT_FROM_EXT_CLK_1				0x05000000
+
+/* PWM2_CLK_ROOT */
+#define PWM2_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define PWM2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define PWM2_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define PWM2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define PWM2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x04000000
+#define PWM2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x07000000
+#define PWM2_CLK_ROOT_FROM_REF_1M_CLK				0x06000000
+#define PWM2_CLK_ROOT_FROM_EXT_CLK_1				0x05000000
+
+/* PWM3_CLK_ROOT */
+#define PWM3_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define PWM3_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define PWM3_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define PWM3_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define PWM3_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x04000000
+#define PWM3_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x07000000
+#define PWM3_CLK_ROOT_FROM_REF_1M_CLK				0x06000000
+#define PWM3_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+
+/* PWM4_CLK_ROOT */
+#define PWM4_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define PWM4_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define PWM4_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define PWM4_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define PWM4_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x04000000
+#define PWM4_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x07000000
+#define PWM4_CLK_ROOT_FROM_REF_1M_CLK				0x06000000
+#define PWM4_CLK_ROOT_FROM_EXT_CLK_2				0x05000000
+
+/* FLEXTIMER1_CLK_ROOT */
+#define FLEXTIMER1_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define FLEXTIMER1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define FLEXTIMER1_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define FLEXTIMER1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define FLEXTIMER1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x04000000
+#define FLEXTIMER1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x07000000
+#define FLEXTIMER1_CLK_ROOT_FROM_REF_1M_CLK			0x06000000
+#define FLEXTIMER1_CLK_ROOT_FROM_EXT_CLK_3			0x05000000
+
+/* FLEXTIMER2_CLK_ROOT */
+#define FLEXTIMER2_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define FLEXTIMER2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define FLEXTIMER2_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define FLEXTIMER2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define FLEXTIMER2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x04000000
+#define FLEXTIMER2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x07000000
+#define FLEXTIMER2_CLK_ROOT_FROM_REF_1M_CLK			0x06000000
+#define FLEXTIMER2_CLK_ROOT_FROM_EXT_CLK_3			0x05000000
+
+/* SIM1_CLK_ROOT */
+#define SIM1_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define SIM1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define SIM1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define SIM1_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define SIM1_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define SIM1_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x06000000
+#define SIM1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x05000000
+#define SIM1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x04000000
+
+/* SIM2_CLK_ROOT */
+#define SIM2_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define SIM2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define SIM2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define SIM2_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define SIM2_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define SIM2_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x06000000
+#define SIM2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x05000000
+#define SIM2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x04000000
+
+/* GPT1_CLK_ROOT */
+#define GPT1_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define GPT1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x02000000
+#define GPT1_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define GPT1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define GPT1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x06000000
+#define GPT1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x04000000
+#define GPT1_CLK_ROOT_FROM_REF_1M_CLK				0x05000000
+#define GPT1_CLK_ROOT_FROM_EXT_CLK_1				0x07000000
+
+/* GPT2_CLK_ROOT */
+#define GPT2_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define GPT2_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x02000000
+#define GPT2_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define GPT2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define GPT2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x06000000
+#define GPT2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x04000000
+#define GPT2_CLK_ROOT_FROM_REF_1M_CLK				0x05000000
+#define GPT2_CLK_ROOT_FROM_EXT_CLK_2				0x07000000
+
+/* GPT3_CLK_ROOT */
+#define GPT3_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define GPT3_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x02000000
+#define GPT3_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define GPT3_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define GPT3_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x06000000
+#define GPT3_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x04000000
+#define GPT3_CLK_ROOT_FROM_REF_1M_CLK				0x05000000
+#define GPT3_CLK_ROOT_FROM_EXT_CLK_3				0x07000000
+
+/* GPT4_CLK_ROOT */
+#define GPT4_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define GPT4_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK		0x02000000
+#define GPT4_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK		0x01000000
+#define GPT4_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x03000000
+#define GPT4_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK			0x06000000
+#define GPT4_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK			0x04000000
+#define GPT4_CLK_ROOT_FROM_REF_1M_CLK				0x05000000
+#define GPT4_CLK_ROOT_FROM_EXT_CLK_4				0x07000000
+
+/* TRACE_CLK_ROOT */
+#define TRACE_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define TRACE_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define TRACE_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define TRACE_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define TRACE_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x04000000
+#define TRACE_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x05000000
+#define TRACE_CLK_ROOT_FROM_EXT_CLK_1				0x06000000
+#define TRACE_CLK_ROOT_FROM_EXT_CLK_3				0x07000000
+
+/* WDOG_CLK_ROOT */
+#define WDOG_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define WDOG_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define WDOG_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define WDOG_CLK_ROOT_FROM_PLL_SYS_PFD1_166M_CLK		0x07000000
+#define WDOG_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define WDOG_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x04000000
+#define WDOG_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x05000000
+#define WDOG_CLK_ROOT_FROM_REF_1M_CLK				0x06000000
+
+/* CSI_MCLK_CLK_ROOT */
+#define CSI_MCLK_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define CSI_MCLK_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define CSI_MCLK_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define CSI_MCLK_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define CSI_MCLK_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x04000000
+#define CSI_MCLK_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x05000000
+#define CSI_MCLK_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+#define CSI_MCLK_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* AUDIO_MCLK_CLK_ROOT */
+#define AUDIO_MCLK_CLK_ROOT_FROM_OSC_24M_CLK			0x00000000
+#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x03000000
+#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK		0x02000000
+#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK		0x01000000
+#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK		0x04000000
+#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK		0x05000000
+#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK		0x06000000
+#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x07000000
+
+/* WRCLK_CLK_ROOT */
+#define WRCLK_CLK_ROOT_FROM_OSC_24M_CLK				0x00000000
+#define WRCLK_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK		0x02000000
+#define WRCLK_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK		0x04000000
+#define WRCLK_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK		0x05000000
+#define WRCLK_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK			0x07000000
+#define WRCLK_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK		0x06000000
+#define WRCLK_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK		0x01000000
+#define WRCLK_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK		0x03000000
+
+/* IPP_DO_CLKO1 */
+#define IPP_DO_CLKO1_FROM_OSC_24M_CLK				0x00000000
+#define IPP_DO_CLKO1_FROM_PLL_DRAM_MAIN_533M_CLK		0x06000000
+#define IPP_DO_CLKO1_FROM_PLL_SYS_MAIN_480M_CLK			0x01000000
+#define IPP_DO_CLKO1_FROM_PLL_SYS_MAIN_240M_CLK			0x02000000
+#define IPP_DO_CLKO1_FROM_PLL_SYS_PFD0_196M_CLK			0x03000000
+#define IPP_DO_CLKO1_FROM_PLL_SYS_PFD3_CLK			0x04000000
+#define IPP_DO_CLKO1_FROM_PLL_ENET_MAIN_500M_CLK		0x05000000
+#define IPP_DO_CLKO1_FROM_REF_1M_CLK				0x07000000
+
+/* IPP_DO_CLKO2 */
+#define IPP_DO_CLKO2_FROM_OSC_24M_CLK				0x00000000
+#define IPP_DO_CLKO2_FROM_PLL_SYS_MAIN_240M_CLK			0x01000000
+#define IPP_DO_CLKO2_FROM_PLL_SYS_PFD0_392M_CLK			0x02000000
+#define IPP_DO_CLKO2_FROM_PLL_SYS_PFD1_166M_CLK			0x03000000
+#define IPP_DO_CLKO2_FROM_PLL_SYS_PFD4_CLK			0x04000000
+#define IPP_DO_CLKO2_FROM_PLL_AUDIO_MAIN_CLK			0x05000000
+#define IPP_DO_CLKO2_FROM_PLL_VIDEO_MAIN_CLK			0x06000000
+#define IPP_DO_CLKO2_FROM_OSC_32K_CLK				0x07000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/gpio.h
new file mode 100644
index 000000000..1da66a4f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_MX7_GPIO_H
+#define __ASM_ARCH_MX7_GPIO_H
+
+#include <asm/mach-imx/gpio.h>
+
+#endif /* __ASM_ARCH_MX7_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/imx-rdc.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/imx-rdc.h
new file mode 100644
index 000000000..3512ddb66
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/imx-rdc.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __IMX_RDC_H__
+#define __IMX_RDC_H__
+
+#if defined(CONFIG_MX7D)
+#include "mx7d_rdc.h"
+#else
+#error "Please select cpu"
+#endif	/* CONFIG_MX7D */
+
+#endif	/* __IMX_RDC_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/imx-regs.h
new file mode 100644
index 000000000..5cab12f30
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/imx-regs.h
@@ -0,0 +1,1192 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __ASM_ARCH_MX7_IMX_REGS_H__
+#define __ASM_ARCH_MX7_IMX_REGS_H__
+
+#define ARCH_MXC
+
+#define ROM_SW_INFO_ADDR                0x000001E8
+#define ROMCP_ARB_BASE_ADDR             0x00000000
+#define ROMCP_ARB_END_ADDR              0x00017FFF
+#define BOOT_ROM_BASE_ADDR              ROMCP_ARB_BASE_ADDR
+#define CAAM_ARB_BASE_ADDR              0x00100000
+#define CAAM_ARB_END_ADDR               0x00107FFF
+#define GIC400_ARB_BASE_ADDR            0x31000000
+#define GIC400_ARB_END_ADDR             0x31007FFF
+#define APBH_DMA_ARB_BASE_ADDR          0x33000000
+#define APBH_DMA_ARB_END_ADDR           0x33007FFF
+#define M4_BOOTROM_BASE_ADDR            0x00180000
+
+#define MXS_APBH_BASE			APBH_DMA_ARB_BASE_ADDR
+#define MXS_GPMI_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x04000)
+
+/* GPV - PL301 configuration ports */
+#define GPV0_BASE_ADDR                  0x32000000
+#define GPV1_BASE_ADDR                  0x32100000
+#define GPV2_BASE_ADDR                  0x32200000
+#define GPV3_BASE_ADDR                  0x32300000
+#define GPV4_BASE_ADDR                  0x32400000
+#define GPV5_BASE_ADDR                  0x32500000
+#define GPV6_BASE_ADDR                  0x32600000
+#define GPV7_BASE_ADDR                  0x32700000
+
+#define OCRAM_ARB_BASE_ADDR             0x00900000
+#define OCRAM_ARB_END_ADDR              0x0091FFFF
+#define OCRAM_EPDC_BASE_ADDR            0x00920000
+#define OCRAM_EPDC_END_ADDR             0x0093FFFF
+#define OCRAM_PXP_BASE_ADDR             0x00940000
+#define OCRAM_PXP_END_ADDR              0x00947FFF
+#define IRAM_BASE_ADDR                  OCRAM_ARB_BASE_ADDR
+#define IRAM_SIZE			0x00020000
+
+#define AIPS1_ARB_BASE_ADDR             0x30000000
+#define AIPS1_ARB_END_ADDR              0x303FFFFF
+#define AIPS2_ARB_BASE_ADDR             0x30400000
+#define AIPS2_ARB_END_ADDR              0x307FFFFF
+#define AIPS3_ARB_BASE_ADDR             0x30800000
+#define AIPS3_ARB_END_ADDR              0x30BFFFFF
+
+#define WEIM_ARB_BASE_ADDR              0x28000000
+#define WEIM_ARB_END_ADDR               0x2FFFFFFF
+
+#define QSPI0_ARB_BASE_ADDR             0x60000000
+#define QSPI0_ARB_END_ADDR              0x6FFFFFFF
+#define PCIE_ARB_BASE_ADDR              0x40000000
+#define PCIE_ARB_END_ADDR               0x4FFFFFFF
+#define PCIE_REG_BASE_ADDR              0x33800000
+#define PCIE_REG_END_ADDR               0x33803FFF
+
+#define MMDC0_ARB_BASE_ADDR             0x80000000
+#define MMDC0_ARB_END_ADDR              0xBFFFFFFF
+#define MMDC1_ARB_BASE_ADDR             0xC0000000
+#define MMDC1_ARB_END_ADDR              0xFFFFFFFF
+
+/* Cortex-A9 MPCore private memory region */
+#define ARM_PERIPHBASE                  0x31000000
+#define SCU_BASE_ADDR                   ARM_PERIPHBASE
+#define GLOBAL_TIMER_BASE_ADDR          (ARM_PERIPHBASE + 0x0200)
+#define PRIVATE_TIMERS_WD_BASE_ADDR     (ARM_PERIPHBASE + 0x0600)
+
+
+/* Defines for Blocks connected via AIPS (SkyBlue) */
+#define AIPS_TZ1_BASE_ADDR              AIPS1_ARB_BASE_ADDR
+#define AIPS_TZ2_BASE_ADDR              AIPS2_ARB_BASE_ADDR
+#define AIPS_TZ3_BASE_ADDR              AIPS3_ARB_BASE_ADDR
+
+/* DAP base-address */
+#define ARM_IPS_BASE_ADDR               AIPS1_ARB_BASE_ADDR
+
+/* AIPS_TZ#1- On Platform */
+#define AIPS1_ON_BASE_ADDR              (AIPS_TZ1_BASE_ADDR+0x1F0000)
+/* AIPS_TZ#1- Off Platform */
+#define AIPS1_OFF_BASE_ADDR             (AIPS_TZ1_BASE_ADDR+0x200000)
+
+#define GPIO1_BASE_ADDR                 AIPS1_OFF_BASE_ADDR
+#define GPIO2_BASE_ADDR                 (AIPS1_OFF_BASE_ADDR+0x10000)
+#define GPIO3_BASE_ADDR                 (AIPS1_OFF_BASE_ADDR+0x20000)
+#define GPIO4_BASE_ADDR                 (AIPS1_OFF_BASE_ADDR+0x30000)
+#define GPIO5_BASE_ADDR                 (AIPS1_OFF_BASE_ADDR+0x40000)
+#define GPIO6_BASE_ADDR                 (AIPS1_OFF_BASE_ADDR+0x50000)
+#define GPIO7_BASE_ADDR                 (AIPS1_OFF_BASE_ADDR+0x60000)
+#define IOMUXC_LPSR_GPR_BASE_ADDR      (AIPS1_OFF_BASE_ADDR+0x70000)
+#define WDOG1_BASE_ADDR                (AIPS1_OFF_BASE_ADDR+0x80000)
+#define WDOG2_BASE_ADDR                (AIPS1_OFF_BASE_ADDR+0x90000)
+#define WDOG3_BASE_ADDR                (AIPS1_OFF_BASE_ADDR+0xA0000)
+#define WDOG4_BASE_ADDR                (AIPS1_OFF_BASE_ADDR+0xB0000)
+#define IOMUXC_LPSR_BASE_ADDR          (AIPS1_OFF_BASE_ADDR+0xC0000)
+#define GPT_IPS_BASE_ADDR              (AIPS1_OFF_BASE_ADDR+0xD0000)
+#define GPT1_BASE_ADDR GPT_IPS_BASE_ADDR
+#define GPT2_IPS_BASE_ADDR             (AIPS1_OFF_BASE_ADDR+0xE0000)
+#define GPT3_IPS_BASE_ADDR             (AIPS1_OFF_BASE_ADDR+0xF0000)
+#define GPT4_IPS_BASE_ADDR             (AIPS1_OFF_BASE_ADDR+0x100000)
+#define ROMCP_IPS_BASE_ADDR            (AIPS1_OFF_BASE_ADDR+0x110000)
+#define KPP_IPS_BASE_ADDR              (AIPS1_OFF_BASE_ADDR+0x120000)
+#define IOMUXC_IPS_BASE_ADDR           (AIPS1_OFF_BASE_ADDR+0x130000)
+#define IOMUXC_BASE_ADDR               IOMUXC_IPS_BASE_ADDR
+#define IOMUXC_GPR_BASE_ADDR           (AIPS1_OFF_BASE_ADDR+0x140000)
+#define OCOTP_BASE_ADDR                (AIPS1_OFF_BASE_ADDR+0x150000)
+#define ANATOP_BASE_ADDR               (AIPS1_OFF_BASE_ADDR+0x160000)
+#define SNVS_BASE_ADDR                 (AIPS1_OFF_BASE_ADDR+0x170000)
+#define CCM_BASE_ADDR                  (AIPS1_OFF_BASE_ADDR+0x180000)
+#define SRC_BASE_ADDR                  (AIPS1_OFF_BASE_ADDR+0x190000)
+#define GPC_IPS_BASE_ADDR              (AIPS1_OFF_BASE_ADDR+0x1A0000)
+#define SEMA41_IPS_BASE_ADDR           (AIPS1_OFF_BASE_ADDR+0x1B0000)
+#define SEMA42_IPS_BASE_ADDR           (AIPS1_OFF_BASE_ADDR+0x1C0000)
+#define RDC_IPS_BASE_ADDR              (AIPS1_OFF_BASE_ADDR+0x1D0000)
+#define CSU_IPS_BASE_ADDR              (AIPS1_OFF_BASE_ADDR+0x1E0000)
+
+/* AIPS_TZ#2- On Platform */
+#define AIPS2_ON_BASE_ADDR              (AIPS_TZ2_BASE_ADDR+0x1F0000)
+/* AIPS_TZ#2- Off Platform */
+#define AIPS2_OFF_BASE_ADDR             (AIPS_TZ2_BASE_ADDR+0x200000)
+#define ADC1_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x10000)
+#define ADC2_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x20000)
+#define ECSPI4_BASE_ADDR                (AIPS2_OFF_BASE_ADDR+0x30000)
+#define FTM1_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x40000)
+#define FTM2_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x50000)
+#define PWM1_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x60000)
+#define PWM2_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x70000)
+#define PWM3_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x80000)
+#define PWM4_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x90000)
+#define SYSCNT_RD_IPS_BASE_ADDR         (AIPS2_OFF_BASE_ADDR+0xA0000)
+#define SYSCNT_CMP_IPS_BASE_ADDR        (AIPS2_OFF_BASE_ADDR+0xB0000)
+#define SYSCNT_CTRL_IPS_BASE_ADDR       (AIPS2_OFF_BASE_ADDR+0xC0000)
+#define PCIE_PHY_IPS_BASE_ADDR          (AIPS2_OFF_BASE_ADDR+0xD0000)
+#define EPDC_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0xF0000)
+#define EPDC_BASE_ADDR                  EPDC_IPS_BASE_ADDR
+#define EPXP_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x100000)
+#define CSI1_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x110000)
+#define ELCDIF1_IPS_BASE_ADDR           (AIPS2_OFF_BASE_ADDR+0x130000)
+#define MIPI_CSI2_IPS_BASE_ADDR         (AIPS2_OFF_BASE_ADDR+0x150000)
+#define MIPI_DSI_IPS_BASE_ADDR          (AIPS2_OFF_BASE_ADDR+0x160000)
+#define IP2APB_TZASC1_IPS_BASE_ADDR     (AIPS2_OFF_BASE_ADDR+0x180000)
+#define DDRPHY_IPS_BASE_ADDR            (AIPS2_OFF_BASE_ADDR+0x190000)
+#define DDRC_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x1A0000)
+#define IP2APB_PERFMON1_IPS_BASE_ADDR   (AIPS2_OFF_BASE_ADDR+0x1C0000)
+#define IP2APB_PERFMON2_IPS_BASE_ADDR   (AIPS2_OFF_BASE_ADDR+0x1D0000)
+#define IP2APB_AXIMON_IPS_BASE_ADDR     (AIPS2_OFF_BASE_ADDR+0x1E0000)
+#define QOSC_IPS_BASE_ADDR              (AIPS2_OFF_BASE_ADDR+0x1F0000)
+
+/* AIPS_TZ#3  - Global enable (0) */
+#define ECSPI1_BASE_ADDR                (AIPS_TZ3_BASE_ADDR+0x20000)
+#define ECSPI2_BASE_ADDR                (AIPS_TZ3_BASE_ADDR+0x30000)
+#define ECSPI3_BASE_ADDR                (AIPS_TZ3_BASE_ADDR+0x40000)
+#define UART1_IPS_BASE_ADDR             (AIPS_TZ3_BASE_ADDR+0x60000)
+#define UART3_IPS_BASE_ADDR             (AIPS_TZ3_BASE_ADDR+0x80000)
+#define UART2_IPS_BASE_ADDR             (AIPS_TZ3_BASE_ADDR+0x90000)
+#define SAI1_IPS_BASE_ADDR              (AIPS_TZ3_BASE_ADDR+0xA0000)
+#define SAI2_IPS_BASE_ADDR              (AIPS_TZ3_BASE_ADDR+0xB0000)
+#define SAI3_IPS_BASE_ADDR              (AIPS_TZ3_BASE_ADDR+0xC0000)
+#define SPBA_IPS_BASE_ADDR              (AIPS_TZ3_BASE_ADDR+0xF0000)
+#define CAAM_IPS_BASE_ADDR              (AIPS_TZ3_BASE_ADDR+0x100000)
+
+/* AIPS_TZ#3- On Platform */
+#define AIPS3_ON_BASE_ADDR              (AIPS_TZ3_BASE_ADDR+0x1F0000)
+/* AIPS_TZ#3- Off Platform */
+#define AIPS3_OFF_BASE_ADDR             (AIPS_TZ3_BASE_ADDR+0x200000)
+#define CAN1_IPS_BASE_ADDR              AIPS3_OFF_BASE_ADDR
+#define CAN2_IPS_BASE_ADDR              (AIPS3_OFF_BASE_ADDR+0x10000)
+#define I2C1_BASE_ADDR                  (AIPS3_OFF_BASE_ADDR+0x20000)
+#define I2C2_BASE_ADDR                  (AIPS3_OFF_BASE_ADDR+0x30000)
+#define I2C3_BASE_ADDR                  (AIPS3_OFF_BASE_ADDR+0x40000)
+#define I2C4_BASE_ADDR                  (AIPS3_OFF_BASE_ADDR+0x50000)
+#define UART4_IPS_BASE_ADDR             (AIPS3_OFF_BASE_ADDR+0x60000)
+#define UART5_IPS_BASE_ADDR             (AIPS3_OFF_BASE_ADDR+0x70000)
+#define UART6_IPS_BASE_ADDR             (AIPS3_OFF_BASE_ADDR+0x80000)
+#define UART7_IPS_BASE_ADDR             (AIPS3_OFF_BASE_ADDR+0x90000)
+#define MUCPU_IPS_BASE_ADDR             (AIPS3_OFF_BASE_ADDR+0xA0000)
+#define MUDSP_IPS_BASE_ADDR             (AIPS3_OFF_BASE_ADDR+0xB0000)
+#define HS_IPS_BASE_ADDR                (AIPS3_OFF_BASE_ADDR+0xC0000)
+#define USBOH2_PL301_IPS_BASE_ADDR      (AIPS3_OFF_BASE_ADDR+0xD0000)
+#define USBOTG1_IPS_BASE_ADDR		(AIPS3_OFF_BASE_ADDR+0x110000)
+#define USBOTG2_IPS_BASE_ADDR		(AIPS3_OFF_BASE_ADDR+0x120000)
+#define USBHSIC_IPS_BASE_ADDR		(AIPS3_OFF_BASE_ADDR+0x130000)
+#define USDHC1_BASE_ADDR                (AIPS3_OFF_BASE_ADDR+0x140000)
+#define USDHC2_BASE_ADDR                (AIPS3_OFF_BASE_ADDR+0x150000)
+#define USDHC3_BASE_ADDR                (AIPS3_OFF_BASE_ADDR+0x160000)
+#define EMVSIM1_IPS_BASE_ADDR           (AIPS3_OFF_BASE_ADDR+0x190000)
+#define EMVSIM2_IPS_BASE_ADDR           (AIPS3_OFF_BASE_ADDR+0x1A0000)
+#define SIM1_IPS_BASE_ADDR              (AIPS3_OFF_BASE_ADDR+0x190000)
+#define SIM2_IPS_BASE_ADDR              (AIPS3_OFF_BASE_ADDR+0x1A0000)
+#define QSPI1_IPS_BASE_ADDR             (AIPS3_OFF_BASE_ADDR+0x1B0000)
+#define WEIM_IPS_BASE_ADDR              (AIPS3_OFF_BASE_ADDR+0x1C0000)
+#define SDMA_PORT_IPS_HOST_BASE_ADDR    (AIPS3_OFF_BASE_ADDR+0x1D0000)
+#define ENET_IPS_BASE_ADDR              (AIPS3_OFF_BASE_ADDR+0x1E0000)
+#define ENET2_IPS_BASE_ADDR             (AIPS3_OFF_BASE_ADDR+0x1F0000)
+
+#define AIPS1_BASE_ADDR			AIPS1_ON_BASE_ADDR
+#define AIPS2_BASE_ADDR			AIPS2_ON_BASE_ADDR
+#define AIPS3_BASE_ADDR			AIPS3_ON_BASE_ADDR
+
+#define SDMA_IPS_HOST_BASE_ADDR         SDMA_PORT_IPS_HOST_BASE_ADDR
+#define SDMA_IPS_HOST_IPS_BASE_ADDR     SDMA_PORT_IPS_HOST_BASE_ADDR
+
+#define SCTR_BASE_ADDR SYSCNT_CTRL_IPS_BASE_ADDR
+#define DEBUG_MONITOR_BASE_ADDR IP2APB_AXIMON_IPS_BASE_ADDR
+
+#define USB_BASE_ADDR USBOTG1_IPS_BASE_ADDR
+#define SEMAPHORE1_BASE_ADDR SEMA41_IPS_BASE_ADDR
+#define SEMAPHORE2_BASE_ADDR SEMA42_IPS_BASE_ADDR
+#define RDC_BASE_ADDR RDC_IPS_BASE_ADDR
+
+#define FEC_QUIRK_ENET_MAC
+#define SNVS_LPGPR	0x68
+#define CONFIG_SYS_FSL_SEC_OFFSET       0
+#define CONFIG_SYS_FSL_SEC_ADDR         (CAAM_IPS_BASE_ADDR + \
+					 CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_OFFSET       0x1000
+#define CONFIG_SYS_FSL_JR0_ADDR         (CONFIG_SYS_FSL_SEC_ADDR + \
+					 CONFIG_SYS_FSL_JR0_OFFSET)
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC   1
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/mach-imx/regs-lcdif.h>
+#include <asm/types.h>
+#include <linux/bitops.h>
+
+extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
+
+/* System Reset Controller (SRC) */
+struct src {
+	u32	scr;
+	u32 a7rcr0;
+	u32 a7rcr1;
+	u32 m4rcr;
+	u32 reserved1;
+	u32 ercr;
+	u32 reserved2;
+	u32 hsicphy_rcr;
+	u32 usbophy1_rcr;
+	u32 usbophy2_rcr;
+	u32 mipiphy_rcr;
+	u32 pciephy_rcr;
+	u32 reserved3[10];
+	u32	sbmr1;
+	u32	srsr;
+	u32	reserved4[2];
+	u32	sisr;
+	u32	simr;
+	u32 sbmr2;
+	u32 gpr1;
+	u32 gpr2;
+	u32 gpr3;
+	u32 gpr4;
+	u32 gpr5;
+	u32 gpr6;
+	u32 gpr7;
+	u32 gpr8;
+	u32 gpr9;
+	u32 gpr10;
+	u32 reserved5[985];
+	u32 ddrc_rcr;
+};
+
+#define src_base ((struct src *)SRC_BASE_ADDR)
+
+#define SRC_M4_REG_OFFSET		0xC
+#define SRC_M4C_NON_SCLR_RST_OFFSET	0
+#define SRC_M4C_NON_SCLR_RST_MASK	BIT(0)
+#define SRC_M4_ENABLE_OFFSET		3
+#define SRC_M4_ENABLE_MASK		BIT(3)
+
+#define SRC_DDRC_RCR_DDRC_CORE_RST_OFFSET	1
+#define SRC_DDRC_RCR_DDRC_CORE_RST_MASK		(1 << 1)
+#define SRC_DDRC_RCR_DDRC_PRST_MASK		(1 << 0)
+
+/* GPR0 Bit Fields */
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL0_MASK     0x1u
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL0_SHIFT    0
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL1_MASK     0x2u
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL1_SHIFT    1
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL2_MASK     0x4u
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL2_SHIFT    2
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL3_MASK     0x8u
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL3_SHIFT    3
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL4_MASK     0x10u
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL4_SHIFT    4
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL5_MASK     0x20u
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL5_SHIFT    5
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL6_MASK     0x40u
+#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL6_SHIFT    6
+#define IOMUXC_GPR_GPR0_ENET_MDIO_OPEN_DRAIN_MASK (3 << 7)
+#define IOMUXC_GPR_GPR0_ENET_MDIO_OPEN_DRAIN_SHIFT 7
+/* GPR1 Bit Fields */
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS0_MASK    0x1u
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS0_SHIFT   0
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0_MASK     0x6u
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0_SHIFT    1
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0(x)       (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0_SHIFT))&IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0_MASK)
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS1_MASK    0x8u
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS1_SHIFT   3
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1_MASK     0x30u
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1_SHIFT    4
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1(x)       (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1_SHIFT))&IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1_MASK)
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS2_MASK    0x40u
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS2_SHIFT   6
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2_MASK     0x180u
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2_SHIFT    7
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2(x)       (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2_SHIFT))&IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2_MASK)
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS3_MASK    0x200u
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS3_SHIFT   9
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3_MASK     0xC00u
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3_SHIFT    10
+#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3(x)       (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3_SHIFT))&IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3_MASK)
+#define IOMUXC_GPR_GPR1_GPR_IRQ_MASK             0x1000u
+#define IOMUXC_GPR_GPR1_GPR_IRQ_SHIFT            12
+#define IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK 0x2000u
+#define IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_SHIFT 13
+#define IOMUXC_GPR_GPR1_GPR_ENET2_TX_CLK_SEL_MASK 0x4000u
+#define IOMUXC_GPR_GPR1_GPR_ENET2_TX_CLK_SEL_SHIFT 14
+#define IOMUXC_GPR_GPR1_GPR_ANATOP_TESTMODE_MASK 0x8000u
+#define IOMUXC_GPR_GPR1_GPR_ANATOP_TESTMODE_SHIFT 15
+#define IOMUXC_GPR_GPR1_GPR_PAD_ADD_DS_MASK      0x10000u
+#define IOMUXC_GPR_GPR1_GPR_PAD_ADD_DS_SHIFT     16
+#define IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK   0x20000u
+#define IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_SHIFT  17
+#define IOMUXC_GPR_GPR1_GPR_ENET2_CLK_DIR_MASK   0x40000u
+#define IOMUXC_GPR_GPR1_GPR_ENET2_CLK_DIR_SHIFT  18
+#define IOMUXC_GPR_GPR1_GPR_EXC_ERR_RESP_EN_MASK 0x400000u
+#define IOMUXC_GPR_GPR1_GPR_EXC_ERR_RESP_EN_SHIFT 22
+#define IOMUXC_GPR_GPR1_GPR_TZASC1_SECURE_BOOT_LOCK_MASK 0x800000u
+#define IOMUXC_GPR_GPR1_GPR_TZASC1_SECURE_BOOT_LOCK_SHIFT 23
+#define IOMUXC_GPR_GPR1_GPR_DBG_ACK_MASK         0x30000000u
+#define IOMUXC_GPR_GPR1_GPR_DBG_ACK_SHIFT        28
+#define IOMUXC_GPR_GPR1_GPR_DBG_ACK(x)           (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_DBG_ACK_SHIFT))&IOMUXC_GPR_GPR1_GPR_DBG_ACK_MASK)
+#define IOMUXC_GPR_GPR1_GPR_ENABLE_OCRAM_EPDC_MASK 0x40000000u
+#define IOMUXC_GPR_GPR1_GPR_ENABLE_OCRAM_EPDC_SHIFT 30
+/* GPR2 Bit Fields */
+#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_LOWPOWER_MASK 0x1u
+#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_LOWPOWER_SHIFT 0
+#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_SD_MASK      0x2u
+#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_SD_SHIFT     1
+#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_DS_MASK      0x4u
+#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_DS_SHIFT     2
+#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_LS_MASK      0x8u
+#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_LS_SHIFT     3
+#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_LOWPOWER_MASK 0x10u
+#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_LOWPOWER_SHIFT 4
+#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_SD_MASK    0x20u
+#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_SD_SHIFT   5
+#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_DS_MASK    0x40u
+#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_DS_SHIFT   6
+#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_LS_MASK    0x80u
+#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_LS_SHIFT   7
+#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_LOWPOWER_MASK 0x100u
+#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_LOWPOWER_SHIFT 8
+#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_SD_MASK     0x200u
+#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_SD_SHIFT    9
+#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_DS_MASK     0x400u
+#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_DS_SHIFT    10
+#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_LS_MASK     0x800u
+#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_LS_SHIFT    11
+#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_LOWPOWER_MASK 0x1000u
+#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_LOWPOWER_SHIFT 12
+#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_SD_MASK      0x2000u
+#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_SD_SHIFT     13
+#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_DS_MASK      0x4000u
+#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_DS_SHIFT     14
+#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_LS_MASK      0x8000u
+#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_LS_SHIFT     15
+#define IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV_MASK     0xFF0000u
+#define IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV_SHIFT    16
+#define IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV(x)       (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV_SHIFT))&IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV_MASK)
+#define IOMUXC_GPR_GPR2_GPR_MQS_SW_RST_MASK      0x1000000u
+#define IOMUXC_GPR_GPR2_GPR_MQS_SW_RST_SHIFT     24
+#define IOMUXC_GPR_GPR2_GPR_MQS_EN_MASK          0x2000000u
+#define IOMUXC_GPR_GPR2_GPR_MQS_EN_SHIFT         25
+#define IOMUXC_GPR_GPR2_GPR_MQS_OVERSAMPLE_MASK  0x4000000u
+#define IOMUXC_GPR_GPR2_GPR_MQS_OVERSAMPLE_SHIFT 26
+#define IOMUXC_GPR_GPR2_GPR_DRAM_RESET_BYPASS_MASK 0x8000000u
+#define IOMUXC_GPR_GPR2_GPR_DRAM_RESET_BYPASS_SHIFT 27
+#define IOMUXC_GPR_GPR2_GPR_DRAM_RESET_MASK      0x10000000u
+#define IOMUXC_GPR_GPR2_GPR_DRAM_RESET_SHIFT     28
+#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE0_MASK       0x20000000u
+#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE0_SHIFT      29
+#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE1_MASK       0x40000000u
+#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE1_SHIFT      30
+#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE_BYPASS_MASK 0x80000000u
+#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE_BYPASS_SHIFT 31
+/* GPR3 Bit Fields */
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_READ_DATA_WAIT_EN_MASK 0x1u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_READ_DATA_WAIT_EN_SHIFT 0
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_READ_ADDR_PIPELINE_EN_MASK 0x2u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_READ_ADDR_PIPELINE_EN_SHIFT 1
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_WRITE_DATA_PIPELINE_EN_MASK 0x4u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_WRITE_DATA_PIPELINE_EN_SHIFT 2
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_WRITE_ADDR_PIPELINE_EN_MASK 0x8u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_WRITE_ADDR_PIPELINE_EN_SHIFT 3
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_READ_DATA_WAIT_EN_MASK 0x10u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_READ_DATA_WAIT_EN_SHIFT 4
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_READ_ADDR_PIPELINE_EN_MASK 0x20u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_READ_ADDR_PIPELINE_EN_SHIFT 5
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_WRITE_DATA_PIPELINE_EN_MASK 0x40u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_WRITE_DATA_PIPELINE_EN_SHIFT 6
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_WRITE_ADDR_PIPELINE_EN_MASK 0x80u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_WRITE_ADDR_PIPELINE_EN_SHIFT 7
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_READ_DATA_WAIT_EN_MASK 0x100u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_READ_DATA_WAIT_EN_SHIFT 8
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_READ_ADDR_PIPELINE_EN_MASK 0x200u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_READ_ADDR_PIPELINE_EN_SHIFT 9
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_WRITE_DATA_PIPELINE_EN_MASK 0x400u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_WRITE_DATA_PIPELINE_EN_SHIFT 10
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_WRITE_ADDR_PIPELINE_EN_MASK 0x800u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_WRITE_ADDR_PIPELINE_EN_SHIFT 11
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_READ_DATA_WAIT_EN_MASK 0x1000u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_READ_DATA_WAIT_EN_SHIFT 12
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_READ_ADDR_PIPELINE_EN_MASK 0x2000u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_READ_ADDR_PIPELINE_EN_SHIFT 13
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_WRITE_DATA_PIPELINE_EN_MASK 0x4000u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_WRITE_DATA_PIPELINE_EN_SHIFT 14
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_WRITE_ADDR_PIPELINE_EN_MASK 0x8000u
+#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_WRITE_ADDR_PIPELINE_EN_SHIFT 15
+#define IOMUXC_GPR_GPR3_ocram_ctrl_read_data_wait_en_update_pending_MASK 0x10000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_read_data_wait_en_update_pending_SHIFT 16
+#define IOMUXC_GPR_GPR3_ocram_ctrl_read_addr_pipeline_en_update_pending_MASK 0x20000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_read_addr_pipeline_en_update_pending_SHIFT 17
+#define IOMUXC_GPR_GPR3_ocram_ctrl_write_data_pipeline_en_update_pending_MASK 0x40000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_write_data_pipeline_en_update_pending_SHIFT 18
+#define IOMUXC_GPR_GPR3_ocram_ctrl_write_addr_pipeline_en_update_pending_MASK 0x80000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_write_addr_pipeline_en_update_pending_SHIFT 19
+#define IOMUXC_GPR_GPR3_ocram_ctrl_s_read_data_wait_en_update_pending_MASK 0x100000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_s_read_data_wait_en_update_pending_SHIFT 20
+#define IOMUXC_GPR_GPR3_ocram_ctrl_s_read_addr_pipeline_en_update_pending_MASK 0x200000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_s_read_addr_pipeline_en_update_pending_SHIFT 21
+#define IOMUXC_GPR_GPR3_ocram_ctrl_s_write_data_pipeline_en_update_pending_MASK 0x400000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_s_write_data_pipeline_en_update_pending_SHIFT 22
+#define IOMUXC_GPR_GPR3_ocram_ctrl_s_write_addr_pipeline_en_update_pending_MASK 0x800000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_s_write_addr_pipeline_en_update_pending_SHIFT 23
+#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_read_data_wait_en_update_pending_MASK 0x1000000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_read_data_wait_en_update_pending_SHIFT 24
+#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_read_addr_pipeline_en_update_pending_MASK 0x2000000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_read_addr_pipeline_en_update_pending_SHIFT 25
+#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_write_data_pipeline_en_update_pending_MASK 0x4000000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_write_data_pipeline_en_update_pending_SHIFT 26
+#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_write_addr_pipeline_en_update_pending_MASK 0x8000000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_write_addr_pipeline_en_update_pending_SHIFT 27
+#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_read_data_wait_en_update_pending_MASK 0x10000000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_read_data_wait_en_update_pending_SHIFT 28
+#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_read_addr_pipeline_en_update_pending_MASK 0x20000000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_read_addr_pipeline_en_update_pending_SHIFT 29
+#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_write_data_pipeline_en_update_pending_MASK 0x40000000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_write_data_pipeline_en_update_pending_SHIFT 30
+#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_write_addr_pipeline_en_update_pending_MASK 0x80000000u
+#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_write_addr_pipeline_en_update_pending_SHIFT 31
+/* GPR4 Bit Fields */
+#define IOMUXC_GPR_GPR4_GPR_SDMA_IPG_STOP_MASK   0x1u
+#define IOMUXC_GPR_GPR4_GPR_SDMA_IPG_STOP_SHIFT  0
+#define IOMUXC_GPR_GPR4_GPR_CAN1_IPG_STOP_MASK   0x2u
+#define IOMUXC_GPR_GPR4_GPR_CAN1_IPG_STOP_SHIFT  1
+#define IOMUXC_GPR_GPR4_GPR_CAN2_IPG_STOP_MASK   0x4u
+#define IOMUXC_GPR_GPR4_GPR_CAN2_IPG_STOP_SHIFT  2
+#define IOMUXC_GPR_GPR4_GPR_ENET1_IPG_STOP_MASK  0x8u
+#define IOMUXC_GPR_GPR4_GPR_ENET1_IPG_STOP_SHIFT 3
+#define IOMUXC_GPR_GPR4_GPR_ENET2_IPG_STOP_MASK  0x10u
+#define IOMUXC_GPR_GPR4_GPR_ENET2_IPG_STOP_SHIFT 4
+#define IOMUXC_GPR_GPR4_GPR_SAI1_IPG_STOP_MASK   0x20u
+#define IOMUXC_GPR_GPR4_GPR_SAI1_IPG_STOP_SHIFT  5
+#define IOMUXC_GPR_GPR4_GPR_SAI2_IPG_STOP_MASK   0x40u
+#define IOMUXC_GPR_GPR4_GPR_SAI2_IPG_STOP_SHIFT  6
+#define IOMUXC_GPR_GPR4_GPR_SAI3_IPG_STOP_MASK   0x80u
+#define IOMUXC_GPR_GPR4_GPR_SAI3_IPG_STOP_SHIFT  7
+#define IOMUXC_GPR_GPR4_sdma_ipg_stop_ack_MASK   0x10000u
+#define IOMUXC_GPR_GPR4_sdma_ipg_stop_ack_SHIFT  16
+#define IOMUXC_GPR_GPR4_can1_ipg_stop_ack_MASK   0x20000u
+#define IOMUXC_GPR_GPR4_can1_ipg_stop_ack_SHIFT  17
+#define IOMUXC_GPR_GPR4_can2_ipg_stop_ack_MASK   0x40000u
+#define IOMUXC_GPR_GPR4_can2_ipg_stop_ack_SHIFT  18
+#define IOMUXC_GPR_GPR4_enet1_ipg_stop_ack_MASK  0x80000u
+#define IOMUXC_GPR_GPR4_enet1_ipg_stop_ack_SHIFT 19
+#define IOMUXC_GPR_GPR4_enet2_ipg_stop_ack_MASK  0x100000u
+#define IOMUXC_GPR_GPR4_enet2_ipg_stop_ack_SHIFT 20
+#define IOMUXC_GPR_GPR4_sai1_ipg_stop_ack_MASK   0x200000u
+#define IOMUXC_GPR_GPR4_sai1_ipg_stop_ack_SHIFT  21
+#define IOMUXC_GPR_GPR4_sai2_ipg_stop_ack_MASK   0x400000u
+#define IOMUXC_GPR_GPR4_sai2_ipg_stop_ack_SHIFT  22
+#define IOMUXC_GPR_GPR4_sai3_ipg_stop_ack_MASK   0x800000u
+#define IOMUXC_GPR_GPR4_sai3_ipg_stop_ack_SHIFT  23
+#define IOMUXC_GPR_GPR4_cpu_STANDBYWFI_MASK      0x6000000u
+#define IOMUXC_GPR_GPR4_cpu_STANDBYWFI_SHIFT     25
+#define IOMUXC_GPR_GPR4_cpu_STANDBYWFI(x)        (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR4_cpu_STANDBYWFI_SHIFT))&IOMUXC_GPR_GPR4_cpu_STANDBYWFI_MASK)
+#define IOMUXC_GPR_GPR4_cpu_STANDBYWFE_MASK      0x18000000u
+#define IOMUXC_GPR_GPR4_cpu_STANDBYWFE_SHIFT     27
+#define IOMUXC_GPR_GPR4_cpu_STANDBYWFE(x)        (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR4_cpu_STANDBYWFE_SHIFT))&IOMUXC_GPR_GPR4_cpu_STANDBYWFE_MASK)
+/* GPR5 Bit Fields */
+#define IOMUXC_GPR_GPR5_GPR_CSI_MUX_CONTROL_MASK 0x10u
+#define IOMUXC_GPR_GPR5_GPR_CSI_MUX_CONTROL_SHIFT 4
+#define IOMUXC_GPR_GPR5_GPR_LVDS_MUX_CONTROL_MASK 0x20u
+#define IOMUXC_GPR_GPR5_GPR_LVDS_MUX_CONTROL_SHIFT 5
+#define IOMUXC_GPR_GPR5_GPR_WDOG1_MASK_MASK      0x40u
+#define IOMUXC_GPR_GPR5_GPR_WDOG1_MASK_SHIFT     6
+#define IOMUXC_GPR_GPR5_GPR_WDOG2_MASK_MASK      0x80u
+#define IOMUXC_GPR_GPR5_GPR_WDOG2_MASK_SHIFT     7
+#define IOMUXC_GPR_GPR5_GPR_LCDIF_HANDSHAKE_MASK 0x1000u
+#define IOMUXC_GPR_GPR5_GPR_LCDIF_HANDSHAKE_SHIFT 12
+#define IOMUXC_GPR_GPR5_GPR_PCIE_BTNRST_MASK     0x80000u
+#define IOMUXC_GPR_GPR5_GPR_PCIE_BTNRST_SHIFT    19
+#define IOMUXC_GPR_GPR5_GPR_WDOG3_MASK_MASK      0x100000u
+#define IOMUXC_GPR_GPR5_GPR_WDOG3_MASK_SHIFT     20
+#define IOMUXC_GPR_GPR5_GPR_LCDIF_CSI_VSYNC_SEL_MASK 0x200000u
+#define IOMUXC_GPR_GPR5_GPR_LCDIF_CSI_VSYNC_SEL_SHIFT 21
+#define IOMUXC_GPR_GPR5_GPR_WDOG4_MASK_MASK      0x400000u
+#define IOMUXC_GPR_GPR5_GPR_WDOG4_MASK_SHIFT     22
+#define IOMUXC_GPR_GPR5_GPR_GPT4_CAPIN1_SEL_MASK 0x1000000u
+#define IOMUXC_GPR_GPR5_GPR_GPT4_CAPIN1_SEL_SHIFT 24
+#define IOMUXC_GPR_GPR5_GPR_GPT4_CAPIN2_SEL_MASK 0x2000000u
+#define IOMUXC_GPR_GPR5_GPR_GPT4_CAPIN2_SEL_SHIFT 25
+#define IOMUXC_GPR_GPR5_GPR_ENET1_EVENT3IN_SEL_MASK 0x4000000u
+#define IOMUXC_GPR_GPR5_GPR_ENET1_EVENT3IN_SEL_SHIFT 26
+#define IOMUXC_GPR_GPR5_GPR_ENET2_EVENT3IN_SEL_MASK 0x8000000u
+#define IOMUXC_GPR_GPR5_GPR_ENET2_EVENT3IN_SEL_SHIFT 27
+#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT1_MASK 0x10000000u
+#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT1_SHIFT 28
+#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT2_MASK 0x20000000u
+#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT2_SHIFT 29
+#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT3_MASK 0x40000000u
+#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT3_SHIFT 30
+#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT4_MASK 0x80000000u
+#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT4_SHIFT 31
+/* GPR6 Bit Fields */
+#define IOMUXC_GPR_GPR6_GPR_ARCACHE_PXP6_MASK    0x1u
+#define IOMUXC_GPR_GPR6_GPR_ARCACHE_PXP6_SHIFT   0
+#define IOMUXC_GPR_GPR6_GPR_AWCACHE_PXP6_MASK    0x2u
+#define IOMUXC_GPR_GPR6_GPR_AWCACHE_PXP6_SHIFT   1
+#define IOMUXC_GPR_GPR6_GPR_ARCACHE_PXP6_EN_MASK 0x4u
+#define IOMUXC_GPR_GPR6_GPR_ARCACHE_PXP6_EN_SHIFT 2
+#define IOMUXC_GPR_GPR6_GPR_AWCACHE_PXP6_EN_MASK 0x8u
+#define IOMUXC_GPR_GPR6_GPR_AWCACHE_PXP6_EN_SHIFT 3
+/* GPR7 Bit Fields */
+#define IOMUXC_GPR_GPR7_GPR_chd1_pwd_ldo_usb_1p0_MASK 0x1u
+#define IOMUXC_GPR_GPR7_GPR_chd1_pwd_ldo_usb_1p0_SHIFT 0
+#define IOMUXC_GPR_GPR7_GPR_chd1_lowpwr_ldo_usb_1p0_MASK 0x2u
+#define IOMUXC_GPR_GPR7_GPR_chd1_lowpwr_ldo_usb_1p0_SHIFT 1
+#define IOMUXC_GPR_GPR7_GPR_chd1_en_ilimit_ldo_usb_1p0_MASK 0x4u
+#define IOMUXC_GPR_GPR7_GPR_chd1_en_ilimit_ldo_usb_1p0_SHIFT 2
+#define IOMUXC_GPR_GPR7_GPR_chd1_en_pwrupload_ldo_usb_1p0_MASK 0x8u
+#define IOMUXC_GPR_GPR7_GPR_chd1_en_pwrupload_ldo_usb_1p0_SHIFT 3
+#define IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test_MASK 0x30u
+#define IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test_SHIFT 4
+#define IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test_SHIFT))&IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test_MASK)
+#define IOMUXC_GPR_GPR7_GPR_chd2_pwd_ldo_usb_1p0_MASK 0x40u
+#define IOMUXC_GPR_GPR7_GPR_chd2_pwd_ldo_usb_1p0_SHIFT 6
+#define IOMUXC_GPR_GPR7_GPR_chd2_lowpwr_ldo_usb_1p0_MASK 0x80u
+#define IOMUXC_GPR_GPR7_GPR_chd2_lowpwr_ldo_usb_1p0_SHIFT 7
+#define IOMUXC_GPR_GPR7_GPR_chd2_en_ilimit_ldo_usb_1p0_MASK 0x100u
+#define IOMUXC_GPR_GPR7_GPR_chd2_en_ilimit_ldo_usb_1p0_SHIFT 8
+#define IOMUXC_GPR_GPR7_GPR_chd2_en_pwrupload_ldo_usb_1p0_MASK 0x200u
+#define IOMUXC_GPR_GPR7_GPR_chd2_en_pwrupload_ldo_usb_1p0_SHIFT 9
+#define IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test_MASK 0xC00u
+#define IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test_SHIFT 10
+#define IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test_SHIFT))&IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test_MASK)
+#define IOMUXC_GPR_GPR7_GPR_pcie_clk_rst_fix_lnkrst_disable_MASK 0x1000u
+#define IOMUXC_GPR_GPR7_GPR_pcie_clk_rst_fix_lnkrst_disable_SHIFT 12
+#define IOMUXC_GPR_GPR7_GPR_pcie_clk_rst_fix_perst_disable_MASK 0x2000u
+#define IOMUXC_GPR_GPR7_GPR_pcie_clk_rst_fix_perst_disable_SHIFT 13
+/* GPR8 Bit Fields */
+#define IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up_MASK 0xF8u
+#define IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up_SHIFT 3
+#define IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up(x)  (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up_SHIFT))&IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up_MASK)
+#define IOMUXC_GPR_GPR8_ddr_phy_dfi_init_start_MASK 0x100u
+#define IOMUXC_GPR_GPR8_ddr_phy_dfi_init_start_SHIFT 8
+/* GPR9 Bit Fields */
+#define IOMUXC_GPR_GPR9_GPR_TZASC1_MUX_CONTROL_MASK 0x1u
+#define IOMUXC_GPR_GPR9_GPR_TZASC1_MUX_CONTROL_SHIFT 0
+#define IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd_MASK     0x3Eu
+#define IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd_SHIFT    1
+#define IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd(x)       (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd_SHIFT))&IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd_MASK)
+/* GPR10 Bit Fields */
+#define IOMUXC_GPR_GPR10_GPR0_BF0_MASK           0x1u
+#define IOMUXC_GPR_GPR10_GPR0_BF0_SHIFT          0
+#define IOMUXC_GPR_GPR10_GPR_DBG_EN_MASK         0x2u
+#define IOMUXC_GPR_GPR10_GPR_DBG_EN_SHIFT        1
+#define IOMUXC_GPR_GPR10_GPR_SEC_ERR_RESP_EN_MASK 0x4u
+#define IOMUXC_GPR_GPR10_GPR_SEC_ERR_RESP_EN_SHIFT 2
+#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION0_MASK 0x8u
+#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION0_SHIFT 3
+#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1_MASK 0x3F0u
+#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1_SHIFT 4
+#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1_SHIFT))&IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1_MASK)
+/* GPR11 Bit Fields */
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION0_MASK 0x1u
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION0_SHIFT 0
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1_MASK 0x3Eu
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1_SHIFT 1
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1_SHIFT))&IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1_MASK)
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION0_MASK 0x40u
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION0_SHIFT 6
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1_MASK 0x380u
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1_SHIFT 7
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1_SHIFT))&IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1_MASK)
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION0_MASK 0x400u
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION0_SHIFT 10
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1_MASK 0x3800u
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1_SHIFT 11
+#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1_SHIFT))&IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1_MASK)
+/* GPR12 Bit Fields */
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_TRSV_REG_RST_CH0_MASK 0x1u
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_TRSV_REG_RST_CH0_SHIFT 0
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_TRSV_RST_CH0_MASK 0x2u
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_TRSV_RST_CH0_SHIFT 1
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_SSC_EN_MASK 0x8u
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_SSC_EN_SHIFT 3
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_CMN_REG_RST_MASK 0x10u
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_CMN_REG_RST_SHIFT 4
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_REFCLK_SEL_MASK 0x20u
+#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_REFCLK_SEL_SHIFT 5
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE_MASK 0xF000u
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE_SHIFT 12
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE_SHIFT))&IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE_MASK)
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT_MASK 0x1E0000u
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT_SHIFT 17
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT_SHIFT))&IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT_MASK)
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS_MASK 0xE00000u
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS_SHIFT 21
+#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS_SHIFT))&IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS_MASK)
+/* GPR13 Bit Fields */
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_USDHC_MASK  0x1u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_USDHC_SHIFT 0
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_USDHC_MASK  0x2u
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_USDHC_SHIFT 1
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PXP_MASK    0x4u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PXP_SHIFT   2
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PXP_MASK    0x8u
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PXP_SHIFT   3
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PCIE_MASK   0x10u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PCIE_SHIFT  4
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PCIE_MASK   0x20u
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PCIE_SHIFT  5
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_LCDIF_MASK  0x40u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_LCDIF_SHIFT 6
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_EPDC_MASK   0x80u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_EPDC_SHIFT  7
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PXP_EN_MASK 0x100u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PXP_EN_SHIFT 8
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PXP_EN_MASK 0x200u
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PXP_EN_SHIFT 9
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PCIE_EN_MASK 0x400u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PCIE_EN_SHIFT 10
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PCIE_EN_MASK 0x800u
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PCIE_EN_SHIFT 11
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_LCDIF_EN_MASK 0x1000u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_LCDIF_EN_SHIFT 12
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_EPDC_EN_MASK 0x2000u
+#define IOMUXC_GPR_GPR13_GPR_ARCACHE_EPDC_EN_SHIFT 13
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_EPDC_MASK   0x4000u
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_EPDC_SHIFT  14
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_EPDC_EN_MASK 0x8000u
+#define IOMUXC_GPR_GPR13_GPR_AWCACHE_EPDC_EN_SHIFT 15
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0_MASK 0xFF0000u
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0_SHIFT 16
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0_SHIFT))&IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0_MASK)
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND_MASK 0xF000000u
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND_SHIFT 24
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND_SHIFT))&IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND_MASK)
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PMA_CDR_LOCKED_CH0_MASK 0x10000000u
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PMA_CDR_LOCKED_CH0_SHIFT 28
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PMA_RX_PRESENT_CH0_MASK 0x20000000u
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PMA_RX_PRESENT_CH0_SHIFT 29
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_CDR_VCO_MON_CH0_MASK 0x40000000u
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_CDR_VCO_MON_CH0_SHIFT 30
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PCS_REFCLK_DISABLE_MASK 0x80000000u
+#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PCS_REFCLK_DISABLE_SHIFT 31
+/* GPR14 Bit Fields */
+#define IOMUXC_GPR_GPR14_GPR_SIM1_SIMV2_EMV_SEL_MASK 0x1u
+#define IOMUXC_GPR_GPR14_GPR_SIM1_SIMV2_EMV_SEL_SHIFT 0
+#define IOMUXC_GPR_GPR14_GPR_SIM2_SIMV2_EMV_SEL_MASK 0x2u
+#define IOMUXC_GPR_GPR14_GPR_SIM2_SIMV2_EMV_SEL_SHIFT 1
+/* GPR15 Bit Fields */
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_VBLK_FLAG_MASK 0x1u
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_VBLK_FLAG_SHIFT 0
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_AUTO_SEL_MASK 0x2u
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_AUTO_SEL_SHIFT 1
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET_MASK 0x3FFCu
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET_SHIFT 2
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET_SHIFT))&IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET_MASK)
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET_MASK 0x3F0000u
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET_SHIFT 16
+#define IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET_SHIFT))&IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET_MASK)
+/* GPR16 Bit Fields */
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR_MASK 0x3u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR_SHIFT 0
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR_SHIFT))&IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR_MASK)
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SEL_DATABF_MASK 0x4u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SEL_DATABF_SHIFT 2
+#define IOMUXC_GPR_GPR16_GPR_LVDS_CNTB_TDLY_MASK 0x8u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_CNTB_TDLY_SHIFT 3
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_EN_H_MASK 0x10u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_EN_H_SHIFT 4
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEWINI_MASK   0x20u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEWINI_SHIFT  5
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS_MASK   0x3C0u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS_SHIFT  6
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS(x)     (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS_SHIFT))&IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS_MASK)
+#define IOMUXC_GPR_GPR16_GPR_LVDS_AUTO_DSK_SEL_MASK 0x400u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_AUTO_DSK_SEL_SHIFT 10
+#define IOMUXC_GPR_GPR16_GPR_LVDS_LOCK_CNT_MASK  0x800u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_LOCK_CNT_SHIFT 11
+#define IOMUXC_GPR_GPR16_GPR_LVDS_OUTCON_MASK    0x1000u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_OUTCON_SHIFT   12
+#define IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE_MASK   0xE000u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE_SHIFT  13
+#define IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE(x)     (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE_SHIFT))&IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE_MASK)
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SRC_TRH_MASK   0x10000u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_SRC_TRH_SHIFT  16
+#define IOMUXC_GPR_GPR16_GPR_LVDS_VOD_HIGH_S_MASK 0x20000u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_VOD_HIGH_S_SHIFT 17
+#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT_MASK 0x180000u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT_SHIFT 19
+#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT(x)   (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT_SHIFT))&IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT_MASK)
+#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_MODE_SEL_MASK 0x200000u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_MODE_SEL_SHIFT 21
+#define IOMUXC_GPR_GPR16_GPR_LVDS_FLT_CNT_MASK   0x400000u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_FLT_CNT_SHIFT  22
+#define IOMUXC_GPR_GPR16_GPR_LVDS_VOD_ONLY_CNT_MASK 0x800000u
+#define IOMUXC_GPR_GPR16_GPR_LVDS_VOD_ONLY_CNT_SHIFT 23
+/* GPR17 Bit Fields */
+#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H_MASK 0xFFu
+#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H_SHIFT 0
+#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H(x)   (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H_SHIFT))&IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H_MASK)
+#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H_MASK 0xFF00u
+#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H_SHIFT 8
+#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H(x)   (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H_SHIFT))&IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H_MASK)
+/* GPR18 Bit Fields */
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL_MASK 0x7u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL_SHIFT 0
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL_MASK)
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV_MASK 0x18u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV_SHIFT 3
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV_MASK)
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV_MASK 0x60u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV_SHIFT 5
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV_MASK)
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL_MASK 0x3F00u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL_SHIFT 8
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL_MASK)
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_FORCE_ERROR_MASK 0x4000u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_FORCE_ERROR_SHIFT 14
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN_MASK 0x7F0000u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN_SHIFT 16
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN_MASK)
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL_MASK 0x3000000u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL_SHIFT 24
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL_MASK)
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_EN_MASK 0x4000000u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_EN_SHIFT 26
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_RESETB_MASK 0x8000000u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_RESETB_SHIFT 27
+#define IOMUXC_GPR_GPR18_GPR_LVDS_DLYS_BST_MASK  0x10000000u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_DLYS_BST_SHIFT 28
+#define IOMUXC_GPR_GPR18_GPR_LVDS_SKINI_BST_MASK 0x20000000u
+#define IOMUXC_GPR_GPR18_GPR_LVDS_SKINI_BST_SHIFT 29
+/* GPR19 Bit Fields */
+#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_STATUS_MASK 0x1u
+#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_STATUS_SHIFT 0
+#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT_MASK 0xFF00u
+#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT_SHIFT 8
+#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT_SHIFT))&IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT_MASK)
+#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_SYNC_MASK 0x10000u
+#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_SYNC_SHIFT 16
+#define IOMUXC_GPR_GPR19_GPR_LVDS_MON_FOR_CNNCT_MASK 0x20000u
+#define IOMUXC_GPR_GPR19_GPR_LVDS_MON_FOR_CNNCT_SHIFT 17
+/* GPR20 Bit Fields */
+#define IOMUXC_GPR_GPR20_GPR_LVDS_P_MASK         0x3Fu
+#define IOMUXC_GPR_GPR20_GPR_LVDS_P_SHIFT        0
+#define IOMUXC_GPR_GPR20_GPR_LVDS_P(x)           (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR20_GPR_LVDS_P_SHIFT))&IOMUXC_GPR_GPR20_GPR_LVDS_P_MASK)
+#define IOMUXC_GPR_GPR20_GPR_LVDS_M_MASK         0x3F00u
+#define IOMUXC_GPR_GPR20_GPR_LVDS_M_SHIFT        8
+#define IOMUXC_GPR_GPR20_GPR_LVDS_M(x)           (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR20_GPR_LVDS_M_SHIFT))&IOMUXC_GPR_GPR20_GPR_LVDS_M_MASK)
+#define IOMUXC_GPR_GPR20_GPR_LVDS_S_MASK         0x30000u
+#define IOMUXC_GPR_GPR20_GPR_LVDS_S_SHIFT        16
+#define IOMUXC_GPR_GPR20_GPR_LVDS_S(x)           (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR20_GPR_LVDS_S_SHIFT))&IOMUXC_GPR_GPR20_GPR_LVDS_S_MASK)
+#define IOMUXC_GPR_GPR20_GPR_LVDS_VSEL_MASK      0x1000000u
+#define IOMUXC_GPR_GPR20_GPR_LVDS_VSEL_SHIFT     24
+#define IOMUXC_GPR_GPR20_GPR_LVDS_CK_POL_SEL_MASK 0x2000000u
+#define IOMUXC_GPR_GPR20_GPR_LVDS_CK_POL_SEL_SHIFT 25
+#define IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY_MASK 0x38000000u
+#define IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY_SHIFT 27
+#define IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY_SHIFT))&IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY_MASK)
+/* GPR21 Bit Fields */
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC0_MASK      0x7u
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC0_SHIFT     0
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC0(x)        (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC0_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC0_MASK)
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC1_MASK      0x38u
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC1_SHIFT     3
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC1(x)        (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC1_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC1_MASK)
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC2_MASK      0x1C0u
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC2_SHIFT     6
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC2(x)        (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC2_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC2_MASK)
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK_MASK     0xE00u
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK_SHIFT    9
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK(x)       (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK_MASK)
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC3_MASK      0x7000u
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC3_SHIFT     12
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC3(x)        (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC3_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC3_MASK)
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC4_MASK      0x38000u
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC4_SHIFT     15
+#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC4(x)        (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC4_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC4_MASK)
+#define IOMUXC_GPR_GPR21_SJC_BYPASS_CJTAGC_MASK  0x40000u
+#define IOMUXC_GPR_GPR21_SJC_BYPASS_CJTAGC_SHIFT 18
+#define IOMUXC_GPR_GPR21_DAP_BYPASS_CJTAGC_MASK  0x80000u
+#define IOMUXC_GPR_GPR21_DAP_BYPASS_CJTAGC_SHIFT 19
+/* GPR22 Bit Fields */
+#define IOMUXC_GPR_GPR22_ddrc_mrr_data_out_MASK  0xFF0000u
+#define IOMUXC_GPR_GPR22_ddrc_mrr_data_out_SHIFT 16
+#define IOMUXC_GPR_GPR22_ddrc_mrr_data_out(x)    (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR22_ddrc_mrr_data_out_SHIFT))&IOMUXC_GPR_GPR22_ddrc_mrr_data_out_MASK)
+#define IOMUXC_GPR_GPR22_ddrc_mrr_valid_out_MASK 0x1000000u
+#define IOMUXC_GPR_GPR22_ddrc_mrr_valid_out_SHIFT 24
+#define IOMUXC_GPR_GPR22_ddr_phy_dfi_init_complete_MASK 0x2000000u
+#define IOMUXC_GPR_GPR22_ddr_phy_dfi_init_complete_SHIFT 25
+#define IOMUXC_GPR_GPR22_GPR_chd2_dvdd_usb_stable_MASK 0x4000000u
+#define IOMUXC_GPR_GPR22_GPR_chd2_dvdd_usb_stable_SHIFT 26
+#define IOMUXC_GPR_GPR22_aux_chrg_det_2_usb_iso_enable_1_MASK 0x8000000u
+#define IOMUXC_GPR_GPR22_aux_chrg_det_2_usb_iso_enable_1_SHIFT 27
+#define IOMUXC_GPR_GPR22_GPR_chd1_dvdd_usb_stable_MASK 0x10000000u
+#define IOMUXC_GPR_GPR22_GPR_chd1_dvdd_usb_stable_SHIFT 28
+#define IOMUXC_GPR_GPR22_aux_chrg_det_1_usb_iso_enable_1_MASK 0x20000000u
+#define IOMUXC_GPR_GPR22_aux_chrg_det_1_usb_iso_enable_1_SHIFT 29
+#define IOMUXC_GPR_GPR22_GPR_PCIE_PHY_PLL_LOCKED_MASK 0x80000000u
+#define IOMUXC_GPR_GPR22_GPR_PCIE_PHY_PLL_LOCKED_SHIFT 31
+
+#define IMX7D_GPR5_CSI1_MUX_CTRL_MASK			(0x1 << 4)
+#define IMX7D_GPR5_CSI1_MUX_CTRL_PARALLEL_CSI		(0x0 << 4)
+#define IMX7D_GPR5_CSI1_MUX_CTRL_MIPI_CSI		(0x1 << 4)
+
+struct iomuxc {
+	u32 gpr[23];
+	/* mux and pad registers */
+};
+
+struct iomuxc_gpr_base_regs {
+	u32 gpr[23];        /* 0x000 */
+};
+
+/*
+ * CSPI register definitions
+ */
+#define MXC_SPI_BASE_ADDRESSES \
+	ECSPI1_BASE_ADDR, \
+	ECSPI2_BASE_ADDR, \
+	ECSPI3_BASE_ADDR, \
+	ECSPI4_BASE_ADDR
+
+#define CSU_INIT_SEC_LEVEL0	0x00FF00FF
+#define CSU_NUM_REGS		64
+
+struct ocotp_regs {
+	u32 ctrl;
+	u32 ctrl_set;
+	u32 ctrl_clr;
+	u32 ctrl_tog;
+	u32 timing;
+	u32 rsvd0[3];
+	u32 data0;
+	u32 rsvd1[3];
+	u32 data1;
+	u32 rsvd2[3];
+	u32 data2;
+	u32 rsvd3[3];
+	u32 data3;
+	u32 rsvd4[3];
+	u32 read_ctrl;
+	u32 rsvd5[3];
+	u32 read_fuse_data0;
+	u32 rsvd6[3];
+	u32 read_fuse_data1;
+	u32 rsvd7[3];
+	u32 read_fuse_data2;
+	u32 rsvd8[3];
+	u32 read_fuse_data3;
+	u32 rsvd9[3];
+	u32 sw_sticky;
+	u32 rsvd10[3];
+	u32 scs;
+	u32 scs_set;
+	u32 scs_clr;
+	u32 scs_tog;
+	u32 crc_addr;
+	u32 rsvd11[3];
+	u32 crc_value;
+	u32 rsvd12[3];
+	u32 version;
+	u32 rsvd13[0xc3];
+
+	struct fuse_bank {	/* offset 0x400 */
+		u32 fuse_regs[0x10];
+	} bank[16];
+};
+
+struct fuse_bank0_regs {
+	u32 lock;
+	u32 rsvd0[3];
+	u32 tester0;
+	u32 rsvd1[3];
+	u32 tester1;
+	u32 rsvd2[3];
+	u32 tester2;
+	u32 rsvd3[3];
+};
+
+struct fuse_bank1_regs {
+	u32 tester3;
+	u32 rsvd0[3];
+	u32 tester4;
+	u32 rsvd1[3];
+	u32 tester5;
+	u32 rsvd2[3];
+	u32 cfg0;
+	u32 rsvd3[3];
+};
+
+struct fuse_bank2_regs {
+	u32 cfg1;
+	u32 rsvd0[3];
+	u32 cfg2;
+	u32 rsvd1[3];
+	u32 cfg3;
+	u32 rsvd2[3];
+	u32 cfg4;
+	u32 rsvd3[3];
+};
+
+struct fuse_bank3_regs {
+	u32 mem_trim0;
+	u32 rsvd0[3];
+	u32 mem_trim1;
+	u32 rsvd1[3];
+	u32 ana0;
+	u32 rsvd2[3];
+	u32 ana1;
+	u32 rsvd3[3];
+};
+
+struct fuse_bank8_regs {
+	u32 sjc_resp_low;
+	u32 rsvd0[3];
+	u32 sjc_resp_high;
+	u32 rsvd1[3];
+	u32 usb_id;
+	u32 rsvd2[3];
+	u32 field_return;
+	u32 rsvd3[3];
+};
+
+struct fuse_bank9_regs {
+	u32 mac_addr0;
+	u32 rsvd0[3];
+	u32 mac_addr1;
+	u32 rsvd1[3];
+	u32 mac_addr2;
+	u32 rsvd2[7];
+};
+
+struct aipstz_regs {
+	u32	mprot0;
+	u32	mprot1;
+	u32	rsvd[0xe];
+	u32	opacr0;
+	u32	opacr1;
+	u32	opacr2;
+	u32	opacr3;
+	u32	opacr4;
+};
+
+struct wdog_regs {
+	u16	wcr;	/* Control */
+	u16	wsr;	/* Service */
+	u16	wrsr;	/* Reset Status */
+	u16	wicr;	/* Interrupt Control */
+	u16	wmcr;	/* Miscellaneous Control */
+};
+
+struct dbg_monitor_regs {
+	u32	ctrl[4];		/* Control */
+	u32	master_en[4];		/* Master enable */
+	u32	irq[4];			/* IRQ */
+	u32	trap_addr_low[4];	/* Trap address low */
+	u32	trap_addr_high[4];	/* Trap address high */
+	u32	trap_id[4];		/* Trap ID */
+	u32	snvs_addr[4];		/* SNVS address */
+	u32	snvs_data[4];		/* SNVS data */
+	u32	snvs_info[4];		/* SNVS info */
+	u32	version[4];		/* Version */
+};
+
+struct rdc_regs {
+	u32	vir;		/* Version information */
+	u32	reserved1[8];
+	u32	stat;		/* Status */
+	u32	intctrl;	/* Interrupt and Control */
+	u32	intstat;	/* Interrupt Status */
+	u32	reserved2[116];
+	u32	mda[27];		/* Master Domain Assignment */
+	u32	reserved3[101];
+	u32	pdap[118];		/* Peripheral Domain Access Permissions */
+	u32	reserved4[138];
+	struct {
+		u32 mrsa;		/* Memory Region Start Address */
+		u32 mrea;		/* Memory Region End Address */
+		u32 mrc;		/* Memory Region Control */
+		u32 mrvs;		/* Memory Region Violation Status */
+	} mem_region[52];
+};
+
+struct rdc_sema_regs {
+	u8	gate[64];	/* Gate */
+	u16	rstgt;		/* Reset Gate */
+};
+
+#define MXS_LCDIF_BASE ELCDIF1_IPS_BASE_ADDR
+
+#define	LCDIF_CTRL_SFTRST					(1 << 31)
+#define	LCDIF_CTRL_CLKGATE					(1 << 30)
+#define	LCDIF_CTRL_YCBCR422_INPUT				(1 << 29)
+#define	LCDIF_CTRL_READ_WRITEB					(1 << 28)
+#define	LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE				(1 << 27)
+#define	LCDIF_CTRL_DATA_SHIFT_DIR				(1 << 26)
+#define	LCDIF_CTRL_SHIFT_NUM_BITS_MASK				(0x1f << 21)
+#define	LCDIF_CTRL_SHIFT_NUM_BITS_OFFSET			21
+#define	LCDIF_CTRL_DVI_MODE					(1 << 20)
+#define	LCDIF_CTRL_BYPASS_COUNT					(1 << 19)
+#define	LCDIF_CTRL_VSYNC_MODE					(1 << 18)
+#define	LCDIF_CTRL_DOTCLK_MODE					(1 << 17)
+#define	LCDIF_CTRL_DATA_SELECT					(1 << 16)
+#define	LCDIF_CTRL_INPUT_DATA_SWIZZLE_MASK			(0x3 << 14)
+#define	LCDIF_CTRL_INPUT_DATA_SWIZZLE_OFFSET			14
+#define	LCDIF_CTRL_CSC_DATA_SWIZZLE_MASK			(0x3 << 12)
+#define	LCDIF_CTRL_CSC_DATA_SWIZZLE_OFFSET			12
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK			(0x3 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_OFFSET			10
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT			(0 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT			(1 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT			(2 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT			(3 << 10)
+#define	LCDIF_CTRL_WORD_LENGTH_MASK				(0x3 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_OFFSET				8
+#define	LCDIF_CTRL_WORD_LENGTH_16BIT				(0 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_8BIT				(1 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_18BIT				(2 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_24BIT				(3 << 8)
+#define	LCDIF_CTRL_RGB_TO_YCBCR422_CSC				(1 << 7)
+#define	LCDIF_CTRL_LCDIF_MASTER					(1 << 5)
+#define	LCDIF_CTRL_DATA_FORMAT_16_BIT				(1 << 3)
+#define	LCDIF_CTRL_DATA_FORMAT_18_BIT				(1 << 2)
+#define	LCDIF_CTRL_DATA_FORMAT_24_BIT				(1 << 1)
+#define	LCDIF_CTRL_RUN						(1 << 0)
+
+#define	LCDIF_CTRL1_COMBINE_MPU_WR_STRB				(1 << 27)
+#define	LCDIF_CTRL1_BM_ERROR_IRQ_EN				(1 << 26)
+#define	LCDIF_CTRL1_BM_ERROR_IRQ				(1 << 25)
+#define	LCDIF_CTRL1_RECOVER_ON_UNDERFLOW			(1 << 24)
+#define	LCDIF_CTRL1_INTERLACE_FIELDS				(1 << 23)
+#define	LCDIF_CTRL1_START_INTERLACE_FROM_SECOND_FIELD		(1 << 22)
+#define	LCDIF_CTRL1_FIFO_CLEAR					(1 << 21)
+#define	LCDIF_CTRL1_IRQ_ON_ALTERNATE_FIELDS			(1 << 20)
+#define	LCDIF_CTRL1_BYTE_PACKING_FORMAT_MASK			(0xf << 16)
+#define	LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET			16
+#define	LCDIF_CTRL1_OVERFLOW_IRQ_EN				(1 << 15)
+#define	LCDIF_CTRL1_UNDERFLOW_IRQ_EN				(1 << 14)
+#define	LCDIF_CTRL1_CUR_FRAME_DONE_IRQ_EN			(1 << 13)
+#define	LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN				(1 << 12)
+#define	LCDIF_CTRL1_OVERFLOW_IRQ				(1 << 11)
+#define	LCDIF_CTRL1_UNDERFLOW_IRQ				(1 << 10)
+#define	LCDIF_CTRL1_CUR_FRAME_DONE_IRQ				(1 << 9)
+#define	LCDIF_CTRL1_VSYNC_EDGE_IRQ				(1 << 8)
+#define	LCDIF_CTRL1_BUSY_ENABLE					(1 << 2)
+#define	LCDIF_CTRL1_MODE86					(1 << 1)
+#define	LCDIF_CTRL1_RESET					(1 << 0)
+
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_MASK			(0x7 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_OFFSET			21
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_1			(0x0 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_2			(0x1 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_4			(0x2 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_8			(0x3 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_16			(0x4 << 21)
+#define	LCDIF_CTRL2_BURST_LEN_8					(1 << 20)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_MASK			(0x7 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_OFFSET			16
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_RGB			(0x0 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_RBG			(0x1 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_GBR			(0x2 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_GRB			(0x3 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_BRG			(0x4 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_BGR			(0x5 << 16)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_MASK			(0x7 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_OFFSET			12
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_RGB			(0x0 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_RBG			(0x1 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_GBR			(0x2 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_GRB			(0x3 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_BRG			(0x4 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_BGR			(0x5 << 12)
+#define	LCDIF_CTRL2_READ_PACK_DIR				(1 << 10)
+#define	LCDIF_CTRL2_READ_MODE_OUTPUT_IN_RGB_FORMAT		(1 << 9)
+#define	LCDIF_CTRL2_READ_MODE_6_BIT_INPUT			(1 << 8)
+#define	LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_MASK		(0x7 << 4)
+#define	LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_OFFSET	4
+#define	LCDIF_CTRL2_INITIAL_DUMMY_READ_MASK			(0x7 << 1)
+#define	LCDIF_CTRL2_INITIAL_DUMMY_READ_OFFSET			1
+
+#define	LCDIF_TRANSFER_COUNT_V_COUNT_MASK			(0xffff << 16)
+#define	LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET			16
+#define	LCDIF_TRANSFER_COUNT_H_COUNT_MASK			(0xffff << 0)
+#define	LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET			0
+
+#define	LCDIF_CUR_BUF_ADDR_MASK					0xffffffff
+#define	LCDIF_CUR_BUF_ADDR_OFFSET				0
+
+#define	LCDIF_NEXT_BUF_ADDR_MASK				0xffffffff
+#define	LCDIF_NEXT_BUF_ADDR_OFFSET				0
+
+#define	LCDIF_TIMING_CMD_HOLD_MASK				(0xff << 24)
+#define	LCDIF_TIMING_CMD_HOLD_OFFSET				24
+#define	LCDIF_TIMING_CMD_SETUP_MASK				(0xff << 16)
+#define	LCDIF_TIMING_CMD_SETUP_OFFSET				16
+#define	LCDIF_TIMING_DATA_HOLD_MASK				(0xff << 8)
+#define	LCDIF_TIMING_DATA_HOLD_OFFSET				8
+#define	LCDIF_TIMING_DATA_SETUP_MASK				(0xff << 0)
+#define	LCDIF_TIMING_DATA_SETUP_OFFSET				0
+
+#define	LCDIF_VDCTRL0_VSYNC_OEB					(1 << 29)
+#define	LCDIF_VDCTRL0_ENABLE_PRESENT				(1 << 28)
+#define	LCDIF_VDCTRL0_VSYNC_POL					(1 << 27)
+#define	LCDIF_VDCTRL0_HSYNC_POL					(1 << 26)
+#define	LCDIF_VDCTRL0_DOTCLK_POL				(1 << 25)
+#define	LCDIF_VDCTRL0_ENABLE_POL				(1 << 24)
+#define	LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT				(1 << 21)
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT			(1 << 20)
+#define	LCDIF_VDCTRL0_HALF_LINE					(1 << 19)
+#define	LCDIF_VDCTRL0_HALF_LINE_MODE				(1 << 18)
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_MASK			0x3ffff
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_OFFSET			0
+
+#define	LCDIF_VDCTRL1_VSYNC_PERIOD_MASK				0xffffffff
+#define	LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET			0
+
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK			(0x3fff << 18)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET			18
+#define	LCDIF_VDCTRL2_HSYNC_PERIOD_MASK				0x3ffff
+#define	LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET			0
+
+#define	LCDIF_VDCTRL3_MUX_SYNC_SIGNALS				(1 << 29)
+#define	LCDIF_VDCTRL3_VSYNC_ONLY				(1 << 28)
+#define	LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_MASK			(0xfff << 16)
+#define	LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET		16
+#define	LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_MASK			(0xffff << 0)
+#define	LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_OFFSET			0
+
+#define	LCDIF_VDCTRL4_DOTCLK_DLY_SEL_MASK			(0x7 << 29)
+#define	LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET			29
+#define	LCDIF_VDCTRL4_SYNC_SIGNALS_ON				(1 << 18)
+#define	LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_MASK		0x3ffff
+#define	LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_OFFSET		0
+
+
+extern void check_cpu_temperature(void);
+
+extern void pcie_power_up(void);
+extern void pcie_power_off(void);
+
+/* If ROM fail back to USB recover mode, USBPH0_PWD will be clear to use USB
+ * If boot from the other mode, USB0_PWD will keep reset value
+ */
+#define	is_boot_from_usb(void) (readl(USBOTG1_IPS_BASE_ADDR + 0x158) || \
+	readl(USBOTG2_IPS_BASE_ADDR + 0x158))
+#define	disconnect_from_pc(void) writel(0x0, USBOTG1_IPS_BASE_ADDR + 0x140)
+
+struct bootrom_sw_info {
+	u8 reserved_1;
+	u8 boot_dev_instance;
+	u8 boot_dev_type;
+	u8 reserved_2;
+	u32 arm_core_freq;
+	u32 axi_freq;
+	u32 ddr_freq;
+	u32 gpt1_freq;
+	u32 reserved_3[3];
+};
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MX7_IMX_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7-ddr.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7-ddr.h
new file mode 100644
index 000000000..8ac721114
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7-ddr.h
@@ -0,0 +1,170 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * DDR controller registers of the i.MX7 architecture
+ *
+ * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ */
+
+#ifndef __ASM_ARCH_MX7_DDR_H__
+#define __ASM_ARCH_MX7_DDR_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/* DDRC Registers (DDRC_IPS_BASE_ADDR) */
+struct ddrc {
+	u32 mstr;		/* 0x0000 */
+	u32 reserved1[0x18];
+	u32 rfshtmg;		/* 0x0064 */
+	u32 reserved2[0x1a];
+	u32 init0;		/* 0x00d0 */
+	u32 init1;		/* 0x00d4 */
+	u32 reserved3;
+	u32 init3;		/* 0x00dc */
+	u32 init4;		/* 0x00e0 */
+	u32 init5;		/* 0x00e4 */
+	u32 reserved4[0x03];
+	u32 rankctl;		/* 0x00f4 */
+	u32 reserved5[0x02];
+	u32 dramtmg0;		/* 0x0100 */
+	u32 dramtmg1;		/* 0x0104 */
+	u32 dramtmg2;		/* 0x0108 */
+	u32 dramtmg3;		/* 0x010c */
+	u32 dramtmg4;		/* 0x0110 */
+	u32 dramtmg5;		/* 0x0114 */
+	u32 reserved6[0x02];
+	u32 dramtmg8;		/* 0x0120 */
+	u32 reserved7[0x17];
+	u32 zqctl0;		/* 0x0180 */
+	u32 zqctl1;		/* 0x0184 */
+	u32 zqctl2;		/* 0x0188 */
+	u32 zqstat;		/* 0x018c */
+	u32 dfitmg0;		/* 0x0190 */
+	u32 dfitmg1;		/* 0x0194 */
+	u32 reserved9[0x02];
+	u32 dfiupd0;		/* 0x01a0 */
+	u32 dfiupd1;		/* 0x01a4 */
+	u32 dfiupd2;		/* 0x01a8 */
+	u32 reserved10[0x15];
+	u32 addrmap0;		/* 0x0200 */
+	u32 addrmap1;		/* 0x0204 */
+	u32 addrmap2;		/* 0x0208 */
+	u32 addrmap3;		/* 0x020c */
+	u32 addrmap4;		/* 0x0210 */
+	u32 addrmap5;		/* 0x0214 */
+	u32 addrmap6;		/* 0x0218 */
+	u32 reserved12[0x09];
+	u32 odtcfg;		/* 0x0240 */
+	u32 odtmap;		/* 0x0244 */
+};
+
+/* DDRC_MSTR fields */
+#define MSTR_DATA_BUS_WIDTH_MASK	0x3 << 12
+#define MSTR_DATA_BUS_WIDTH_SHIFT	12
+#define MSTR_DATA_ACTIVE_RANKS_MASK	0xf << 24
+#define MSTR_DATA_ACTIVE_RANKS_SHIFT	24
+/* DDRC_ADDRMAP1 fields */
+#define ADDRMAP1_BANK_B0_MASK		0x1f << 0
+#define ADDRMAP1_BANK_B0_SHIFT		0
+#define ADDRMAP1_BANK_B1_MASK		0x1f << 8
+#define ADDRMAP1_BANK_B1_SHIFT		8
+#define ADDRMAP1_BANK_B2_MASK		0x1f << 16
+#define ADDRMAP1_BANK_B2_SHIFT		16
+/* DDRC_ADDRMAP2 fields */
+#define ADDRMAP2_COL_B2_MASK		0xF << 0
+#define ADDRMAP2_COL_B2_SHIFT		0
+#define ADDRMAP2_COL_B3_MASK		0xF << 8
+#define ADDRMAP2_COL_B3_SHIFT		8
+#define ADDRMAP2_COL_B4_MASK		0xF << 16
+#define ADDRMAP2_COL_B4_SHIFT		16
+#define ADDRMAP2_COL_B5_MASK		0xF << 24
+#define ADDRMAP2_COL_B5_SHIFT		24
+/* DDRC_ADDRMAP3 fields */
+#define ADDRMAP3_COL_B6_MASK		0xF << 0
+#define ADDRMAP3_COL_B6_SHIFT		0
+#define ADDRMAP3_COL_B7_MASK		0xF << 8
+#define ADDRMAP3_COL_B7_SHIFT		8
+#define ADDRMAP3_COL_B8_MASK		0xF << 16
+#define ADDRMAP3_COL_B8_SHIFT		16
+#define ADDRMAP3_COL_B9_MASK		0xF << 24
+#define ADDRMAP3_COL_B9_SHIFT		24
+/* DDRC_ADDRMAP4 fields */
+#define ADDRMAP4_COL_B10_MASK		0xF << 0
+#define ADDRMAP4_COL_B10_SHIFT		0
+#define ADDRMAP4_COL_B11_MASK		0xF << 8
+#define ADDRMAP4_COL_B11_SHIFT		8
+/* DDRC_ADDRMAP5 fields */
+#define ADDRMAP5_ROW_B0_MASK		0xF << 0
+#define ADDRMAP5_ROW_B0_SHIFT		0
+#define ADDRMAP5_ROW_B1_MASK		0xF << 8
+#define ADDRMAP5_ROW_B1_SHIFT		8
+#define ADDRMAP5_ROW_B2_10_MASK		0xF << 16
+#define ADDRMAP5_ROW_B2_10_SHIFT	16
+#define ADDRMAP5_ROW_B11_MASK		0xF << 24
+#define ADDRMAP5_ROW_B11_SHIFT		24
+/* DDRC_ADDRMAP6 fields */
+#define ADDRMAP6_ROW_B12_MASK		0xF << 0
+#define ADDRMAP6_ROW_B12_SHIFT		0
+#define ADDRMAP6_ROW_B13_MASK		0xF << 8
+#define ADDRMAP6_ROW_B13_SHIFT		8
+#define ADDRMAP6_ROW_B14_MASK		0xF << 16
+#define ADDRMAP6_ROW_B14_SHIFT		16
+#define ADDRMAP6_ROW_B15_MASK		0xF << 24
+#define ADDRMAP6_ROW_B15_SHIFT		24
+
+/* DDRC_MP Registers */
+#define DDRC_MP_BASE_ADDR (DDRC_IPS_BASE_ADDR + 0x03fc)
+struct ddrc_mp {
+	u32 reserved1[0x25];
+	u32 pctrl_0;		/* 0x0094 */
+};
+
+/* DDR_PHY registers */
+struct ddr_phy {
+	u32 phy_con0;		/* 0x0000 */
+	u32 phy_con1;		/* 0x0004 */
+	u32 reserved1[0x02];
+	u32 phy_con4;		/* 0x0010 */
+	u32 reserved2;
+	u32 offset_lp_con0;	/* 0x0018 */
+	u32 reserved3;
+	u32 offset_rd_con0;	/* 0x0020 */
+	u32 reserved4[0x03];
+	u32 offset_wr_con0;	/* 0x0030 */
+	u32 reserved5[0x07];
+	u32 cmd_sdll_con0;	/* 0x0050 */
+	u32 reserved6[0x06];
+	u32 cmd_lvl_con0;	/* 0x006c */
+	u32 reserved7[0x02];
+	u32 cmd_lvl_con3;	/* 0x0078 */
+	u32 cmd_deskew_con0;	/* 0x007c */
+	u32 cmd_deskew_con1;	/* 0x0080 */
+	u32 cmd_deskew_con2;	/* 0x0084 */
+	u32 cmd_deskew_con3;	/* 0x0088 */
+	u32 reserved8[0x02];
+	u32 cmd_deskew_con4;	/* 0x0094 */
+	u32 reserved9;
+	u32 drvds_con0;		/* 0x009c */
+	u32 reserved10[0x04];
+	u32 mdll_con0;		/* 0x00b0 */
+	u32 reserved11[0x03];
+	u32 zq_con0;		/* 0x00c0 */
+};
+
+#define DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK BIT(24)
+
+#define MX7_CAL_VAL_MAX 5
+/* Calibration parameters */
+struct mx7_calibration {
+	int num_val;			/* Number of calibration values */
+	u32 values[MX7_CAL_VAL_MAX];	/* calibration values */
+};
+
+void mx7_dram_cfg(struct ddrc *ddrc_regs_val, struct ddrc_mp *ddrc_mp_val,
+		  struct ddr_phy *ddr_phy_regs_val,
+		  struct mx7_calibration *calib_param);
+
+#endif	/*__ASM_ARCH_MX7_DDR_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7-pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7-pins.h
new file mode 100644
index 000000000..bc99a8646
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7-pins.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+#ifndef __ASM_ARCH_MX7_PINS_H__
+#define __ASM_ARCH_MX7_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+#if defined(CONFIG_MX7D)
+#include "mx7d_pins.h"
+#elif defined(CONFIG_MX7S)
+#include "mx7s_pins.h"
+#else
+#error "Please select cpu"
+#endif	/* CONFIG_MX7D */
+
+#endif	/*__ASM_ARCH_MX7_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7_plugin.S b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7_plugin.S
new file mode 100644
index 000000000..c7a84e8ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7_plugin.S
@@ -0,0 +1,110 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <config.h>
+
+#define ROM_API_TABLE_BASE_ADDR_LEGACY		0x180
+#define ROM_VERSION_OFFSET               	0x80
+#define ROM_API_HWCNFG_SETUP_OFFSET		0x08
+
+plugin_start:
+
+	push    {r0-r4, lr}
+
+	imx7_ddr_setting
+	imx7_clock_gating
+	imx7_qos_setting
+
+/*
+ * Check if we are in USB serial download mode and immediately return to ROM
+ * Need to check USB CTRL clock firstly, then check the USBx_nASYNCLISTADDR
+ */
+	ldr r0, =0x30384680
+	ldr r1, [r0]
+	cmp r1, #0
+	beq normal_boot
+
+	ldr r0, =0x30B10158
+	ldr r1, [r0]
+	cmp r1, #0
+	beq normal_boot
+
+	pop {r0-r4, lr}
+	bx lr
+
+normal_boot:
+
+/*
+ * The following is to fill in those arguments for this ROM function
+ * pu_irom_hwcnfg_setup(void **start, size_t *bytes, const void *boot_data)
+ * This function is used to copy data from the storage media into DDR.
+ * start - Initial (possibly partial) image load address on entry.
+ *         Final image load address on exit.
+ * bytes - Initial (possibly partial) image size on entry.
+ *         Final image size on exit.
+ * boot_data - Initial @ref ivt Boot Data load address.
+ */
+	adr r0, boot_data2
+	adr r1, image_len2
+	adr r2, boot_data2
+
+/*
+ * check the _pu_irom_api_table for the address
+ */
+before_calling_rom___pu_irom_hwcnfg_setup:
+	ldr r3, =ROM_VERSION_OFFSET
+	ldr r4, [r3]
+	ldr r3, =ROM_API_TABLE_BASE_ADDR_LEGACY
+	ldr r4, [r3, #ROM_API_HWCNFG_SETUP_OFFSET]
+	blx r4
+after_calling_rom___pu_irom_hwcnfg_setup:
+
+
+/* To return to ROM from plugin, we need to fill in these argument.
+ * Here is what need to do:
+ * Need to construct the paramters for this function before return to ROM:
+ * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset)
+ */
+	pop {r0-r4, lr}
+	push {r5}
+	ldr r5, boot_data2
+	str r5, [r0]
+	ldr r5, image_len2
+	str r5, [r1]
+	ldr r5, second_ivt_offset
+	str r5, [r2]
+	mov r0, #1
+	pop {r5}
+
+	/* return back to ROM code */
+	bx lr
+
+/* make the following data right in the end of the output*/
+.ltorg
+
+#define FLASH_OFFSET 0x400
+
+/*
+ * second_ivt_offset is the offset from the "second_ivt_header" to
+ * "image_copy_start", which involves FLASH_OFFSET, plus the first
+ * ivt_header, the plugin code size itself recorded by "ivt2_header"
+ */
+
+second_ivt_offset:      .long (ivt2_header + 0x2C + FLASH_OFFSET)
+
+/*
+ * The following is the second IVT header plus the second boot data
+ */
+ivt2_header:            .long 0x0
+app2_code_jump_v:       .long 0x0
+reserv3:                .long 0x0
+dcd2_ptr:               .long 0x0
+boot_data2_ptr:         .long 0x0
+self_ptr2:              .long 0x0
+app_code_csf2:          .long 0x0
+reserv4:                .long 0x0
+boot_data2:             .long 0x0
+image_len2:             .long 0x0
+plugin2:                .long 0x0
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7d_pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7d_pins.h
new file mode 100644
index 000000000..d54680f17
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7d_pins.h
@@ -0,0 +1,1307 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_IMX7D_PINS_H__
+#define __ASM_ARCH_IMX7D_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+	MX7D_PAD_GPIO1_IO00__GPIO1_IO0                           = IOMUX_PAD(0x0030, 0x0000, IOMUX_CONFIG_LPSR | 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO00__PWM4_OUT				 = IOMUX_PAD(0x0030, 0x0000, IOMUX_CONFIG_LPSR | 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B                        = IOMUX_PAD(0x0030, 0x0000, IOMUX_CONFIG_LPSR | 3, 0x0000, 0, 0),
+
+	MX7D_PAD_GPIO1_IO01__GPIO1_IO1                           = IOMUX_PAD(0x0034, 0x0004, IOMUX_CONFIG_LPSR | 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO01__PWM1_OUT                            = IOMUX_PAD(0x0034, 0x0004, IOMUX_CONFIG_LPSR | 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3                   = IOMUX_PAD(0x0034, 0x0004, IOMUX_CONFIG_LPSR | 2, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO01__SAI1_MCLK				 = IOMUX_PAD(0x0034, 0x0004, IOMUX_CONFIG_LPSR | 3, 0x0000, 0, 0),
+
+	MX7D_PAD_GPIO1_IO02__GPIO1_IO2                           = IOMUX_PAD(0x0038, 0x0008, IOMUX_CONFIG_LPSR | 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO02__PWM2_OUT                            = IOMUX_PAD(0x0038, 0x0008, IOMUX_CONFIG_LPSR | 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1                   = IOMUX_PAD(0x0038, 0x0008, IOMUX_CONFIG_LPSR | 2, 0x0564, 3, 0),
+	MX7D_PAD_GPIO1_IO02__SAI2_MCLK                           = IOMUX_PAD(0x0038, 0x0008, IOMUX_CONFIG_LPSR | 3, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO02__CCM_CLKO1                           = IOMUX_PAD(0x0038, 0x0008, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO02__USB_OTG1_ID                         = IOMUX_PAD(0x0038, 0x0008, IOMUX_CONFIG_LPSR | 7, 0x0734, 3, 0),
+
+	MX7D_PAD_GPIO1_IO03__GPIO1_IO3                           = IOMUX_PAD(0x003c, 0x000C, IOMUX_CONFIG_LPSR | 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO03__PWM3_OUT                            = IOMUX_PAD(0x003c, 0x000C, IOMUX_CONFIG_LPSR | 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2                   = IOMUX_PAD(0x003c, 0x000C, IOMUX_CONFIG_LPSR | 2, 0x0570, 3, 0),
+	MX7D_PAD_GPIO1_IO03__SAI3_MCLK                           = IOMUX_PAD(0x003c, 0x000C, IOMUX_CONFIG_LPSR | 3, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO03__CCM_CLKO2                           = IOMUX_PAD(0x003c, 0x000C, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO03__USB_OTG2_ID                         = IOMUX_PAD(0x003c, 0x000C, IOMUX_CONFIG_LPSR | 7, 0x0730, 3, 0),
+
+	MX7D_PAD_GPIO1_IO04__GPIO1_IO4                           = IOMUX_PAD(0x0040, 0x0010, IOMUX_CONFIG_LPSR | 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO04__USB_OTG1_OC                         = IOMUX_PAD(0x0040, 0x0010, IOMUX_CONFIG_LPSR | 1, 0x072C, 1, 0),
+	MX7D_PAD_GPIO1_IO04__FLEXTIMER_CH4                       = IOMUX_PAD(0x0040, 0x0010, IOMUX_CONFIG_LPSR | 2, 0x0594, 1, 0),
+	MX7D_PAD_GPIO1_IO04__UART5_CTS_B                         = IOMUX_PAD(0x0040, 0x0010, IOMUX_CONFIG_LPSR | 3, 0x0710, 4, 0),
+	MX7D_PAD_GPIO1_IO04__I2C1_SCL                            = IOMUX_PAD(0x0040, 0x0010, IOMUX_CONFIG_LPSR | IOMUX_CONFIG_SION | 4, 0x05D4, 2, 0),
+
+	MX7D_PAD_GPIO1_IO05__GPIO1_IO5                           = IOMUX_PAD(0x0044, 0x0014, IOMUX_CONFIG_LPSR | 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR                        = IOMUX_PAD(0x0044, 0x0014, IOMUX_CONFIG_LPSR | 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5                      = IOMUX_PAD(0x0044, 0x0014, IOMUX_CONFIG_LPSR | 2, 0x0598, 1, 0),
+	MX7D_PAD_GPIO1_IO05__UART5_RTS_B                         = IOMUX_PAD(0x0044, 0x0014, IOMUX_CONFIG_LPSR | 3, 0x0710, 5, 0),
+	MX7D_PAD_GPIO1_IO05__I2C1_SDA                            = IOMUX_PAD(0x0044, 0x0014, IOMUX_CONFIG_LPSR | IOMUX_CONFIG_SION | 4, 0x05D8, 2, 0),
+
+	MX7D_PAD_GPIO1_IO06__GPIO1_IO6                           = IOMUX_PAD(0x0048, 0x0018, IOMUX_CONFIG_LPSR | 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO06__USB_OTG2_OC                         = IOMUX_PAD(0x0048, 0x0018, IOMUX_CONFIG_LPSR | 1, 0x0728, 1, 0),
+	MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6                      = IOMUX_PAD(0x0048, 0x0018, IOMUX_CONFIG_LPSR | 2, 0x059C, 1, 0),
+	MX7D_PAD_GPIO1_IO06__UART5_RX_DATA                       = IOMUX_PAD(0x0048, 0x0018, IOMUX_CONFIG_LPSR | 3, 0x0714, 4, 0),
+	MX7D_PAD_GPIO1_IO06__I2C2_SCL                            = IOMUX_PAD(0x0048, 0x0018, IOMUX_CONFIG_LPSR | IOMUX_CONFIG_SION | 4, 0x05DC, 2, 0),
+	MX7D_PAD_GPIO1_IO06__CCM_WAIT				 = IOMUX_PAD(0x0048, 0x0018, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO06__KPP_ROW4				 = IOMUX_PAD(0x0048, 0x0018, IOMUX_CONFIG_LPSR | 6, 0x0624, 1, 0),
+
+	MX7D_PAD_GPIO1_IO07__GPIO1_IO7                           = IOMUX_PAD(0x004c, 0x001c, IOMUX_CONFIG_LPSR | 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR                        = IOMUX_PAD(0x004c, 0x001c, IOMUX_CONFIG_LPSR | 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7                      = IOMUX_PAD(0x004c, 0x001c, IOMUX_CONFIG_LPSR | 2, 0x05A0, 1, 0),
+	MX7D_PAD_GPIO1_IO07__UART5_TX_DATA                       = IOMUX_PAD(0x004c, 0x001c, IOMUX_CONFIG_LPSR | 3, 0x0714, 5, 0),
+	MX7D_PAD_GPIO1_IO07__I2C2_SDA                            = IOMUX_PAD(0x004c, 0x001c, IOMUX_CONFIG_LPSR | IOMUX_CONFIG_SION | 4, 0x05E0, 2, 0),
+	MX7D_PAD_GPIO1_IO07__CCM_STOP				 = IOMUX_PAD(0x004c, 0x001c, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO07__KPP_COL4				 = IOMUX_PAD(0x004c, 0x001c, IOMUX_CONFIG_LPSR | 6, 0x0604, 1, 0),
+};
+
+enum {
+	MX7D_PAD_GPIO1_IO08__GPIO1_IO8                           = IOMUX_PAD(0x026C, 0x0014, 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO08__SD1_VSELECT                         = IOMUX_PAD(0x026C, 0x0014, 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B                        = IOMUX_PAD(0x026C, 0x0014, 2, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO08__UART3_DCE_RX                        = IOMUX_PAD(0x026C, 0x0014, 3, 0x0704, 0, 0),
+	MX7D_PAD_GPIO1_IO08__UART3_DTE_TX                        = IOMUX_PAD(0x026C, 0x0014, 3, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO08__I2C3_SCL                            = IOMUX_PAD(0x026C, 0x0014, IOMUX_CONFIG_SION | 4, 0x05E4, 0, 0),
+	MX7D_PAD_GPIO1_IO08__KPP_COL5                            = IOMUX_PAD(0x026C, 0x0014, 6, 0x0608, 0, 0),
+	MX7D_PAD_GPIO1_IO08__PWM1_OUT                            = IOMUX_PAD(0x026C, 0x0014, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_GPIO1_IO09__GPIO1_IO9                           = IOMUX_PAD(0x0270, 0x0018, 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO09__SD1_LCTL                            = IOMUX_PAD(0x0270, 0x0018, 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3                   = IOMUX_PAD(0x0270, 0x0018, 2, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO09__UART3_DCE_TX                        = IOMUX_PAD(0x0270, 0x0018, 3, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO09__UART3_DTE_RX                        = IOMUX_PAD(0x0270, 0x0018, 3, 0x0704, 1, 0),
+	MX7D_PAD_GPIO1_IO09__I2C3_SDA                            = IOMUX_PAD(0x0270, 0x0018, IOMUX_CONFIG_SION | 4, 0x05E8, 0, 0),
+	MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY                      = IOMUX_PAD(0x0270, 0x0018, 5, 0x04F4, 0, 0),
+	MX7D_PAD_GPIO1_IO09__KPP_ROW5                            = IOMUX_PAD(0x0270, 0x0018, 6, 0x0628, 0, 0),
+	MX7D_PAD_GPIO1_IO09__PWM2_OUT                            = IOMUX_PAD(0x0270, 0x0018, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_GPIO1_IO10__GPIO1_IO10                          = IOMUX_PAD(0x0274, 0x001C, 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO10__SD2_LCTL                            = IOMUX_PAD(0x0274, 0x001C, 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO10__ENET1_MDIO                          = IOMUX_PAD(0x0274, 0x001C, 2, 0x0568, 0, 0),
+	MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS                       = IOMUX_PAD(0x0274, 0x001C, 3, 0x0700, 0, 0),
+	MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS                       = IOMUX_PAD(0x0274, 0x001C, 3, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO10__I2C4_SCL                            = IOMUX_PAD(0x0274, 0x001C, IOMUX_CONFIG_SION | 4, 0x05EC, 0, 0),
+	MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA                      = IOMUX_PAD(0x0274, 0x001C, 5, 0x05A4, 0, 0),
+	MX7D_PAD_GPIO1_IO10__KPP_COL6                            = IOMUX_PAD(0x0274, 0x001C, 6, 0x060C, 0, 0),
+	MX7D_PAD_GPIO1_IO10__PWM3_OUT                            = IOMUX_PAD(0x0274, 0x001C, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_GPIO1_IO11__GPIO1_IO11                          = IOMUX_PAD(0x0278, 0x0020, 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO11__SD3_LCTL                            = IOMUX_PAD(0x0278, 0x0020, 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO11__ENET1_MDC                           = IOMUX_PAD(0x0278, 0x0020, 2, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS                       = IOMUX_PAD(0x0278, 0x0020, 3, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS                       = IOMUX_PAD(0x0278, 0x0020, 3, 0x0700, 1, 0),
+	MX7D_PAD_GPIO1_IO11__I2C4_SDA                            = IOMUX_PAD(0x0278, 0x0020, IOMUX_CONFIG_SION | 4, 0x05F0, 0, 0),
+	MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB                      = IOMUX_PAD(0x0278, 0x0020, 5, 0x05A8, 0, 0),
+	MX7D_PAD_GPIO1_IO11__KPP_ROW6                            = IOMUX_PAD(0x0278, 0x0020, 6, 0x062C, 0, 0),
+	MX7D_PAD_GPIO1_IO11__PWM4_OUT                            = IOMUX_PAD(0x0278, 0x0020, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_GPIO1_IO12__GPIO1_IO12                          = IOMUX_PAD(0x027C, 0x0024, 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO12__SD2_VSELECT                         = IOMUX_PAD(0x027C, 0x0024, 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1                   = IOMUX_PAD(0x027C, 0x0024, 2, 0x0564, 0, 0),
+	MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX                         = IOMUX_PAD(0x027C, 0x0024, 3, 0x04DC, 0, 0),
+	MX7D_PAD_GPIO1_IO12__CM4_NMI                             = IOMUX_PAD(0x027C, 0x0024, 4, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1                        = IOMUX_PAD(0x027C, 0x0024, 5, 0x04E4, 0, 0),
+	MX7D_PAD_GPIO1_IO12__SNVS_VIO_5                          = IOMUX_PAD(0x027C, 0x0024, 6, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO12__USB_OTG1_ID                         = IOMUX_PAD(0x027C, 0x0024, 7, 0x0734, 0, 0),
+
+	MX7D_PAD_GPIO1_IO13__GPIO1_IO13                          = IOMUX_PAD(0x0280, 0x0028, 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO13__SD3_VSELECT                         = IOMUX_PAD(0x0280, 0x0028, 1, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2                   = IOMUX_PAD(0x0280, 0x0028, 2, 0x0570, 0, 0),
+	MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX                         = IOMUX_PAD(0x0280, 0x0028, 3, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY                      = IOMUX_PAD(0x0280, 0x0028, 4, 0x04F4, 1, 0),
+	MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2                        = IOMUX_PAD(0x0280, 0x0028, 5, 0x04E8, 0, 0),
+	MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL                      = IOMUX_PAD(0x0280, 0x0028, 6, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO13__USB_OTG2_ID                         = IOMUX_PAD(0x0280, 0x0028, 7, 0x0730, 0, 0),
+
+	MX7D_PAD_GPIO1_IO14__GPIO1_IO14                          = IOMUX_PAD(0x0284, 0x002C, 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO14__SD3_CD_B                            = IOMUX_PAD(0x0284, 0x002C, 1, 0x0738, 0, 0),
+	MX7D_PAD_GPIO1_IO14__ENET2_MDIO                          = IOMUX_PAD(0x0284, 0x002C, 2, 0x0574, 0, 0),
+	MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX                         = IOMUX_PAD(0x0284, 0x002C, 3, 0x04E0, 0, 0),
+	MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B                        = IOMUX_PAD(0x0284, 0x002C, 4, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3                        = IOMUX_PAD(0x0284, 0x002C, 5, 0x04EC, 0, 0),
+	MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0                     = IOMUX_PAD(0x0284, 0x002C, 6, 0x06D8, 0, 0),
+
+	MX7D_PAD_GPIO1_IO15__GPIO1_IO15                          = IOMUX_PAD(0x0288, 0x0030, 0, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO15__SD3_WP                              = IOMUX_PAD(0x0288, 0x0030, 1, 0x073C, 0, 0),
+	MX7D_PAD_GPIO1_IO15__ENET2_MDC                           = IOMUX_PAD(0x0288, 0x0030, 2, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX                         = IOMUX_PAD(0x0288, 0x0030, 3, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B                        = IOMUX_PAD(0x0288, 0x0030, 4, 0x0000, 0, 0),
+	MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4                        = IOMUX_PAD(0x0288, 0x0030, 5, 0x04F0, 0, 0),
+	MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1                     = IOMUX_PAD(0x0288, 0x0030, 6, 0x06DC, 0, 0),
+
+	MX7D_PAD_EPDC_DATA00__EPDC_DATA0                         = IOMUX_PAD(0x02A4, 0x0034, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                    = IOMUX_PAD(0x02A4, 0x0034, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                       = IOMUX_PAD(0x02A4, 0x0034, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA00__KPP_ROW3                           = IOMUX_PAD(0x02A4, 0x0034, 3, 0x0620, 0, 0),
+	MX7D_PAD_EPDC_DATA00__EIM_AD0                            = IOMUX_PAD(0x02A4, 0x0034, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA00__GPIO2_IO0                          = IOMUX_PAD(0x02A4, 0x0034, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA00__LCD_DATA0                          = IOMUX_PAD(0x02A4, 0x0034, 6, 0x0638, 0, 0),
+	MX7D_PAD_EPDC_DATA00__LCD_CLK                            = IOMUX_PAD(0x02A4, 0x0034, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA01__EPDC_DATA1                         = IOMUX_PAD(0x02A8, 0x0038, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK                     = IOMUX_PAD(0x02A8, 0x0038, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1                       = IOMUX_PAD(0x02A8, 0x0038, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA01__KPP_COL3                           = IOMUX_PAD(0x02A8, 0x0038, 3, 0x0600, 0, 0),
+	MX7D_PAD_EPDC_DATA01__EIM_AD1                            = IOMUX_PAD(0x02A8, 0x0038, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA01__GPIO2_IO1                          = IOMUX_PAD(0x02A8, 0x0038, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA01__LCD_DATA1                          = IOMUX_PAD(0x02A8, 0x0038, 6, 0x063C, 0, 0),
+	MX7D_PAD_EPDC_DATA01__LCD_ENABLE                         = IOMUX_PAD(0x02A8, 0x0038, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA02__EPDC_DATA2                         = IOMUX_PAD(0x02AC, 0x003C, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B                   = IOMUX_PAD(0x02AC, 0x003C, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2                       = IOMUX_PAD(0x02AC, 0x003C, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA02__KPP_ROW2                           = IOMUX_PAD(0x02AC, 0x003C, 3, 0x061C, 0, 0),
+	MX7D_PAD_EPDC_DATA02__EIM_AD2                            = IOMUX_PAD(0x02AC, 0x003C, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA02__GPIO2_IO2                          = IOMUX_PAD(0x02AC, 0x003C, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA02__LCD_DATA2                          = IOMUX_PAD(0x02AC, 0x003C, 6, 0x0640, 0, 0),
+	MX7D_PAD_EPDC_DATA02__LCD_VSYNC                          = IOMUX_PAD(0x02AC, 0x003C, 7, 0x0698, 0, 0),
+
+	MX7D_PAD_EPDC_DATA03__EPDC_DATA3                         = IOMUX_PAD(0x02B0, 0x0040, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN                    = IOMUX_PAD(0x02B0, 0x0040, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3                       = IOMUX_PAD(0x02B0, 0x0040, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA03__KPP_COL2                           = IOMUX_PAD(0x02B0, 0x0040, 3, 0x05FC, 0, 0),
+	MX7D_PAD_EPDC_DATA03__EIM_AD3                            = IOMUX_PAD(0x02B0, 0x0040, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA03__GPIO2_IO3                          = IOMUX_PAD(0x02B0, 0x0040, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA03__LCD_DATA3                          = IOMUX_PAD(0x02B0, 0x0040, 6, 0x0644, 0, 0),
+	MX7D_PAD_EPDC_DATA03__LCD_HSYNC                          = IOMUX_PAD(0x02B0, 0x0040, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA04__EPDC_DATA4                         = IOMUX_PAD(0x02B4, 0x0044, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD                      = IOMUX_PAD(0x02B4, 0x0044, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA04__QSPI_A_DQS                         = IOMUX_PAD(0x02B4, 0x0044, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA04__KPP_ROW1                           = IOMUX_PAD(0x02B4, 0x0044, 3, 0x0618, 0, 0),
+	MX7D_PAD_EPDC_DATA04__EIM_AD4                            = IOMUX_PAD(0x02B4, 0x0044, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA04__GPIO2_IO4                          = IOMUX_PAD(0x02B4, 0x0044, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA04__LCD_DATA4                          = IOMUX_PAD(0x02B4, 0x0044, 6, 0x0648, 0, 0),
+	MX7D_PAD_EPDC_DATA04__JTAG_FAIL                          = IOMUX_PAD(0x02B4, 0x0044, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA05__EPDC_DATA5                         = IOMUX_PAD(0x02B8, 0x0048, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD                    = IOMUX_PAD(0x02B8, 0x0048, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK                        = IOMUX_PAD(0x02B8, 0x0048, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA05__KPP_COL1                           = IOMUX_PAD(0x02B8, 0x0048, 3, 0x05F8, 0, 0),
+	MX7D_PAD_EPDC_DATA05__EIM_AD5                            = IOMUX_PAD(0x02B8, 0x0048, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA05__GPIO2_IO5                          = IOMUX_PAD(0x02B8, 0x0048, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA05__LCD_DATA5                          = IOMUX_PAD(0x02B8, 0x0048, 6, 0x064C, 0, 0),
+	MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE                        = IOMUX_PAD(0x02B8, 0x0048, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA06__EPDC_DATA6                         = IOMUX_PAD(0x02BC, 0x004C, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK                     = IOMUX_PAD(0x02BC, 0x004C, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B                       = IOMUX_PAD(0x02BC, 0x004C, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA06__KPP_ROW0                           = IOMUX_PAD(0x02BC, 0x004C, 3, 0x0614, 0, 0),
+	MX7D_PAD_EPDC_DATA06__EIM_AD6                            = IOMUX_PAD(0x02BC, 0x004C, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA06__GPIO2_IO6                          = IOMUX_PAD(0x02BC, 0x004C, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA06__LCD_DATA6                          = IOMUX_PAD(0x02BC, 0x004C, 6, 0x0650, 0, 0),
+	MX7D_PAD_EPDC_DATA06__JTAG_DE_B                          = IOMUX_PAD(0x02BC, 0x004C, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA07__EPDC_DATA7                         = IOMUX_PAD(0x02C0, 0x0050, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B                   = IOMUX_PAD(0x02C0, 0x0050, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B                       = IOMUX_PAD(0x02C0, 0x0050, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA07__KPP_COL0                           = IOMUX_PAD(0x02C0, 0x0050, 3, 0x05F4, 0, 0),
+	MX7D_PAD_EPDC_DATA07__EIM_AD7                            = IOMUX_PAD(0x02C0, 0x0050, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA07__GPIO2_IO7                          = IOMUX_PAD(0x02C0, 0x0050, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA07__LCD_DATA7                          = IOMUX_PAD(0x02C0, 0x0050, 6, 0x0654, 0, 0),
+	MX7D_PAD_EPDC_DATA07__JTAG_DONE                          = IOMUX_PAD(0x02C0, 0x0050, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA08__EPDC_DATA8                         = IOMUX_PAD(0x02C4, 0x0054, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD                    = IOMUX_PAD(0x02C4, 0x0054, 1, 0x06E4, 0, 0),
+	MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0                       = IOMUX_PAD(0x02C4, 0x0054, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA08__UART6_DCE_RX                       = IOMUX_PAD(0x02C4, 0x0054, 3, 0x071C, 0, 0),
+	MX7D_PAD_EPDC_DATA08__UART6_DTE_TX                       = IOMUX_PAD(0x02C4, 0x0054, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA08__EIM_OE                             = IOMUX_PAD(0x02C4, 0x0054, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA08__GPIO2_IO8                          = IOMUX_PAD(0x02C4, 0x0054, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA08__LCD_DATA8                          = IOMUX_PAD(0x02C4, 0x0054, 6, 0x0658, 0, 0),
+	MX7D_PAD_EPDC_DATA08__LCD_BUSY                           = IOMUX_PAD(0x02C4, 0x0054, 7, 0x0634, 0, 0),
+	MX7D_PAD_EPDC_DATA08__EPDC_SDCLK                         = IOMUX_PAD(0x02C4, 0x0054, 8, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA09__EPDC_DATA9                         = IOMUX_PAD(0x02C8, 0x0058, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK                     = IOMUX_PAD(0x02C8, 0x0058, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1                       = IOMUX_PAD(0x02C8, 0x0058, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA09__UART6_DCE_TX                       = IOMUX_PAD(0x02C8, 0x0058, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA09__UART6_DTE_RX                       = IOMUX_PAD(0x02C8, 0x0058, 3, 0x071C, 1, 0),
+	MX7D_PAD_EPDC_DATA09__EIM_RW                             = IOMUX_PAD(0x02C8, 0x0058, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA09__GPIO2_IO9                          = IOMUX_PAD(0x02C8, 0x0058, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA09__LCD_DATA9                          = IOMUX_PAD(0x02C8, 0x0058, 6, 0x065C, 0, 0),
+	MX7D_PAD_EPDC_DATA09__LCD_DATA0                          = IOMUX_PAD(0x02C8, 0x0058, 7, 0x0638, 1, 0),
+	MX7D_PAD_EPDC_DATA09__EPDC_SDLE                          = IOMUX_PAD(0x02C8, 0x0058, 8, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA10__EPDC_DATA10                        = IOMUX_PAD(0x02CC, 0x005C, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B                   = IOMUX_PAD(0x02CC, 0x005C, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2                       = IOMUX_PAD(0x02CC, 0x005C, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS                      = IOMUX_PAD(0x02CC, 0x005C, 3, 0x0718, 0, 0),
+	MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS                      = IOMUX_PAD(0x02CC, 0x005C, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA10__EIM_CS0_B                          = IOMUX_PAD(0x02CC, 0x005C, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA10__GPIO2_IO10                         = IOMUX_PAD(0x02CC, 0x005C, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA10__LCD_DATA10                         = IOMUX_PAD(0x02CC, 0x005C, 6, 0x0660, 0, 0),
+	MX7D_PAD_EPDC_DATA10__LCD_DATA9                          = IOMUX_PAD(0x02CC, 0x005C, 7, 0x065C, 1, 0),
+	MX7D_PAD_EPDC_DATA10__EPDC_SDOE                          = IOMUX_PAD(0x02CC, 0x005C, 8, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA11__EPDC_DATA11                        = IOMUX_PAD(0x02D0, 0x0060, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN                    = IOMUX_PAD(0x02D0, 0x0060, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3                       = IOMUX_PAD(0x02D0, 0x0060, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS                      = IOMUX_PAD(0x02D0, 0x0060, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS                      = IOMUX_PAD(0x02D0, 0x0060, 3, 0x0718, 1, 0),
+	MX7D_PAD_EPDC_DATA11__EIM_BCLK                           = IOMUX_PAD(0x02D0, 0x0060, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA11__GPIO2_IO11                         = IOMUX_PAD(0x02D0, 0x0060, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA11__LCD_DATA11                         = IOMUX_PAD(0x02D0, 0x0060, 6, 0x0664, 0, 0),
+	MX7D_PAD_EPDC_DATA11__LCD_DATA1                          = IOMUX_PAD(0x02D0, 0x0060, 7, 0x063C, 1, 0),
+	MX7D_PAD_EPDC_DATA11__EPDC_SDCE0                         = IOMUX_PAD(0x02D0, 0x0060, 8, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA12__EPDC_DATA12                        = IOMUX_PAD(0x02D4, 0x0064, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD                      = IOMUX_PAD(0x02D4, 0x0064, 1, 0x06E0, 0, 0),
+	MX7D_PAD_EPDC_DATA12__QSPI_B_DQS                         = IOMUX_PAD(0x02D4, 0x0064, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA12__UART7_DCE_RX                       = IOMUX_PAD(0x02D4, 0x0064, 3, 0x0724, 0, 0),
+	MX7D_PAD_EPDC_DATA12__UART7_DTE_TX                       = IOMUX_PAD(0x02D4, 0x0064, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA12__EIM_LBA_B                          = IOMUX_PAD(0x02D4, 0x0064, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA12__GPIO2_IO12                         = IOMUX_PAD(0x02D4, 0x0064, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA12__LCD_DATA12                         = IOMUX_PAD(0x02D4, 0x0064, 6, 0x0668, 0, 0),
+	MX7D_PAD_EPDC_DATA12__LCD_DATA21                         = IOMUX_PAD(0x02D4, 0x0064, 7, 0x068C, 0, 0),
+	MX7D_PAD_EPDC_DATA12__EPDC_GDCLK                         = IOMUX_PAD(0x02D4, 0x0064, 8, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA13__EPDC_DATA13                        = IOMUX_PAD(0x02D8, 0x0068, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD                    = IOMUX_PAD(0x02D8, 0x0068, 1, 0x06EC, 0, 0),
+	MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK                        = IOMUX_PAD(0x02D8, 0x0068, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA13__UART7_DCE_TX                       = IOMUX_PAD(0x02D8, 0x0068, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA13__UART7_DTE_RX                       = IOMUX_PAD(0x02D8, 0x0068, 3, 0x0724, 1, 0),
+	MX7D_PAD_EPDC_DATA13__EIM_WAIT                           = IOMUX_PAD(0x02D8, 0x0068, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA13__GPIO2_IO13                         = IOMUX_PAD(0x02D8, 0x0068, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA13__LCD_DATA13                         = IOMUX_PAD(0x02D8, 0x0068, 6, 0x066C, 0, 0),
+	MX7D_PAD_EPDC_DATA13__LCD_CS                             = IOMUX_PAD(0x02D8, 0x0068, 7, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA13__EPDC_GDOE                          = IOMUX_PAD(0x02D8, 0x0068, 8, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA14__EPDC_DATA14                        = IOMUX_PAD(0x02DC, 0x006C, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK                     = IOMUX_PAD(0x02DC, 0x006C, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B                       = IOMUX_PAD(0x02DC, 0x006C, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS                      = IOMUX_PAD(0x02DC, 0x006C, 3, 0x0720, 0, 0),
+	MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS                      = IOMUX_PAD(0x02DC, 0x006C, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA14__EIM_EB_B0                          = IOMUX_PAD(0x02DC, 0x006C, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA14__GPIO2_IO14                         = IOMUX_PAD(0x02DC, 0x006C, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA14__LCD_DATA14                         = IOMUX_PAD(0x02DC, 0x006C, 6, 0x0670, 0, 0),
+	MX7D_PAD_EPDC_DATA14__LCD_DATA22                         = IOMUX_PAD(0x02DC, 0x006C, 7, 0x0690, 0, 0),
+	MX7D_PAD_EPDC_DATA14__EPDC_GDSP                          = IOMUX_PAD(0x02DC, 0x006C, 8, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_DATA15__EPDC_DATA15                        = IOMUX_PAD(0x02E0, 0x0070, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B                   = IOMUX_PAD(0x02E0, 0x0070, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B                       = IOMUX_PAD(0x02E0, 0x0070, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS                      = IOMUX_PAD(0x02E0, 0x0070, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS                      = IOMUX_PAD(0x02E0, 0x0070, 3, 0x0720, 1, 0),
+	MX7D_PAD_EPDC_DATA15__EIM_CS1_B                          = IOMUX_PAD(0x02E0, 0x0070, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA15__GPIO2_IO15                         = IOMUX_PAD(0x02E0, 0x0070, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA15__LCD_DATA15                         = IOMUX_PAD(0x02E0, 0x0070, 6, 0x0674, 0, 0),
+	MX7D_PAD_EPDC_DATA15__LCD_WR_RWN                         = IOMUX_PAD(0x02E0, 0x0070, 7, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM                       = IOMUX_PAD(0x02E0, 0x0070, 8, 0x0000, 0, 0),
+
+	MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK                          = IOMUX_PAD(0x02E4, 0x0074, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN                     = IOMUX_PAD(0x02E4, 0x0074, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0                     = IOMUX_PAD(0x02E4, 0x0074, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCLK__KPP_ROW4                            = IOMUX_PAD(0x02E4, 0x0074, 3, 0x0624, 0, 0),
+	MX7D_PAD_EPDC_SDCLK__EIM_AD10                            = IOMUX_PAD(0x02E4, 0x0074, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCLK__GPIO2_IO16                          = IOMUX_PAD(0x02E4, 0x0074, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCLK__LCD_CLK                             = IOMUX_PAD(0x02E4, 0x0074, 6, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCLK__LCD_DATA20                          = IOMUX_PAD(0x02E4, 0x0074, 7, 0x0688, 0, 0),
+
+	MX7D_PAD_EPDC_SDLE__EPDC_SDLE                            = IOMUX_PAD(0x02E8, 0x0078, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD                        = IOMUX_PAD(0x02E8, 0x0078, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1                      = IOMUX_PAD(0x02E8, 0x0078, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDLE__KPP_COL4                             = IOMUX_PAD(0x02E8, 0x0078, 3, 0x0604, 0, 0),
+	MX7D_PAD_EPDC_SDLE__EIM_AD11                             = IOMUX_PAD(0x02E8, 0x0078, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDLE__GPIO2_IO17                           = IOMUX_PAD(0x02E8, 0x0078, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDLE__LCD_DATA16                           = IOMUX_PAD(0x02E8, 0x0078, 6, 0x0678, 0, 0),
+	MX7D_PAD_EPDC_SDLE__LCD_DATA8                            = IOMUX_PAD(0x02E8, 0x0078, 7, 0x0658, 1, 0),
+
+	MX7D_PAD_EPDC_SDOE__EPDC_SDOE                            = IOMUX_PAD(0x02EC, 0x007C, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0                       = IOMUX_PAD(0x02EC, 0x007C, 1, 0x0584, 0, 0),
+	MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2                      = IOMUX_PAD(0x02EC, 0x007C, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDOE__KPP_COL5                             = IOMUX_PAD(0x02EC, 0x007C, 3, 0x0608, 1, 0),
+	MX7D_PAD_EPDC_SDOE__EIM_AD12                             = IOMUX_PAD(0x02EC, 0x007C, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDOE__GPIO2_IO18                           = IOMUX_PAD(0x02EC, 0x007C, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDOE__LCD_DATA17                           = IOMUX_PAD(0x02EC, 0x007C, 6, 0x067C, 0, 0),
+	MX7D_PAD_EPDC_SDOE__LCD_DATA23                           = IOMUX_PAD(0x02EC, 0x007C, 7, 0x0694, 0, 0),
+
+	MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR                          = IOMUX_PAD(0x02F0, 0x0080, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1                      = IOMUX_PAD(0x02F0, 0x0080, 1, 0x0588, 0, 0),
+	MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3                     = IOMUX_PAD(0x02F0, 0x0080, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDSHR__KPP_ROW5                            = IOMUX_PAD(0x02F0, 0x0080, 3, 0x0628, 1, 0),
+	MX7D_PAD_EPDC_SDSHR__EIM_AD13                            = IOMUX_PAD(0x02F0, 0x0080, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDSHR__GPIO2_IO19                          = IOMUX_PAD(0x02F0, 0x0080, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDSHR__LCD_DATA18                          = IOMUX_PAD(0x02F0, 0x0080, 6, 0x0680, 0, 0),
+	MX7D_PAD_EPDC_SDSHR__LCD_DATA10                          = IOMUX_PAD(0x02F0, 0x0080, 7, 0x0660, 1, 0),
+
+	MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0                          = IOMUX_PAD(0x02F4, 0x0084, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2                      = IOMUX_PAD(0x02F4, 0x0084, 1, 0x058C, 0, 0),
+	MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL                  = IOMUX_PAD(0x02F4, 0x0084, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE0__EIM_AD14                            = IOMUX_PAD(0x02F4, 0x0084, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE0__GPIO2_IO20                          = IOMUX_PAD(0x02F4, 0x0084, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE0__LCD_DATA19                          = IOMUX_PAD(0x02F4, 0x0084, 6, 0x0684, 0, 0),
+	MX7D_PAD_EPDC_SDCE0__LCD_DATA5                           = IOMUX_PAD(0x02F4, 0x0084, 7, 0x064C, 1, 0),
+
+	MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1                          = IOMUX_PAD(0x02F8, 0x0088, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3                      = IOMUX_PAD(0x02F8, 0x0088, 1, 0x0590, 0, 0),
+	MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC                     = IOMUX_PAD(0x02F8, 0x0088, 2, 0x0578, 0, 0),
+	MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER                         = IOMUX_PAD(0x02F8, 0x0088, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE1__EIM_AD15                            = IOMUX_PAD(0x02F8, 0x0088, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE1__GPIO2_IO21                          = IOMUX_PAD(0x02F8, 0x0088, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE1__LCD_DATA20                          = IOMUX_PAD(0x02F8, 0x0088, 6, 0x0688, 1, 0),
+	MX7D_PAD_EPDC_SDCE1__LCD_DATA4                           = IOMUX_PAD(0x02F8, 0x0088, 7, 0x0648, 1, 0),
+
+	MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2                          = IOMUX_PAD(0x02FC, 0x008C, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN                     = IOMUX_PAD(0x02FC, 0x008C, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0                     = IOMUX_PAD(0x02FC, 0x008C, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE2__KPP_COL6                            = IOMUX_PAD(0x02FC, 0x008C, 3, 0x060C, 1, 0),
+	MX7D_PAD_EPDC_SDCE2__EIM_ADDR16                          = IOMUX_PAD(0x02FC, 0x008C, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE2__GPIO2_IO22                          = IOMUX_PAD(0x02FC, 0x008C, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE2__LCD_DATA21                          = IOMUX_PAD(0x02FC, 0x008C, 6, 0x068C, 1, 0),
+	MX7D_PAD_EPDC_SDCE2__LCD_DATA3                           = IOMUX_PAD(0x02FC, 0x008C, 7, 0x0644, 1, 0),
+
+	MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3                          = IOMUX_PAD(0x0300, 0x0090, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD                       = IOMUX_PAD(0x0300, 0x0090, 1, 0x06E8, 0, 0),
+	MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1                     = IOMUX_PAD(0x0300, 0x0090, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE3__KPP_ROW6                            = IOMUX_PAD(0x0300, 0x0090, 3, 0x062C, 1, 0),
+	MX7D_PAD_EPDC_SDCE3__EIM_ADDR17                          = IOMUX_PAD(0x0300, 0x0090, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE3__GPIO2_IO23                          = IOMUX_PAD(0x0300, 0x0090, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_SDCE3__LCD_DATA22                          = IOMUX_PAD(0x0300, 0x0090, 6, 0x0690, 1, 0),
+	MX7D_PAD_EPDC_SDCE3__LCD_DATA2                           = IOMUX_PAD(0x0300, 0x0090, 7, 0x0640, 1, 0),
+
+	MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK                          = IOMUX_PAD(0x0304, 0x0094, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0                      = IOMUX_PAD(0x0304, 0x0094, 1, 0x05AC, 0, 0),
+	MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2                     = IOMUX_PAD(0x0304, 0x0094, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDCLK__KPP_COL7                            = IOMUX_PAD(0x0304, 0x0094, 3, 0x0610, 0, 0),
+	MX7D_PAD_EPDC_GDCLK__EIM_ADDR18                          = IOMUX_PAD(0x0304, 0x0094, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDCLK__GPIO2_IO24                          = IOMUX_PAD(0x0304, 0x0094, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDCLK__LCD_DATA23                          = IOMUX_PAD(0x0304, 0x0094, 6, 0x0694, 1, 0),
+	MX7D_PAD_EPDC_GDCLK__LCD_DATA16                          = IOMUX_PAD(0x0304, 0x0094, 7, 0x0678, 1, 0),
+
+	MX7D_PAD_EPDC_GDOE__EPDC_GDOE                            = IOMUX_PAD(0x0308, 0x0098, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1                       = IOMUX_PAD(0x0308, 0x0098, 1, 0x05B0, 0, 0),
+	MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3                      = IOMUX_PAD(0x0308, 0x0098, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDOE__KPP_ROW7                             = IOMUX_PAD(0x0308, 0x0098, 3, 0x0630, 0, 0),
+	MX7D_PAD_EPDC_GDOE__EIM_ADDR19                           = IOMUX_PAD(0x0308, 0x0098, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDOE__GPIO2_IO25                           = IOMUX_PAD(0x0308, 0x0098, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDOE__LCD_WR_RWN                           = IOMUX_PAD(0x0308, 0x0098, 6, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDOE__LCD_DATA18                           = IOMUX_PAD(0x0308, 0x0098, 7, 0x0680, 1, 0),
+
+	MX7D_PAD_EPDC_GDRL__EPDC_GDRL                            = IOMUX_PAD(0x030C, 0x009C, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2                       = IOMUX_PAD(0x030C, 0x009C, 1, 0x05B4, 0, 0),
+	MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL                   = IOMUX_PAD(0x030C, 0x009C, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDRL__EIM_ADDR20                           = IOMUX_PAD(0x030C, 0x009C, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDRL__GPIO2_IO26                           = IOMUX_PAD(0x030C, 0x009C, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDRL__LCD_RD_E                             = IOMUX_PAD(0x030C, 0x009C, 6, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDRL__LCD_DATA19                           = IOMUX_PAD(0x030C, 0x009C, 7, 0x0684, 1, 0),
+
+	MX7D_PAD_EPDC_GDSP__EPDC_GDSP                            = IOMUX_PAD(0x0310, 0x00A0, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3                       = IOMUX_PAD(0x0310, 0x00A0, 1, 0x05B8, 0, 0),
+	MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC                      = IOMUX_PAD(0x0310, 0x00A0, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDSP__ENET2_TX_ER                          = IOMUX_PAD(0x0310, 0x00A0, 3, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDSP__EIM_ADDR21                           = IOMUX_PAD(0x0310, 0x00A0, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDSP__GPIO2_IO27                           = IOMUX_PAD(0x0310, 0x00A0, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_GDSP__LCD_BUSY                             = IOMUX_PAD(0x0310, 0x00A0, 6, 0x0634, 1, 0),
+	MX7D_PAD_EPDC_GDSP__LCD_DATA17                           = IOMUX_PAD(0x0310, 0x00A0, 7, 0x067C, 1, 0),
+
+	MX7D_PAD_EPDC_BDR0__EPDC_BDR0                            = IOMUX_PAD(0x0314, 0x00A4, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK                         = IOMUX_PAD(0x0314, 0x00A4, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2                    = IOMUX_PAD(0x0314, 0x00A4, 3, 0x0570, 1, 0),
+	MX7D_PAD_EPDC_BDR0__EIM_ADDR22                           = IOMUX_PAD(0x0314, 0x00A4, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR0__GPIO2_IO28                           = IOMUX_PAD(0x0314, 0x00A4, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR0__LCD_CS                               = IOMUX_PAD(0x0314, 0x00A4, 6, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR0__LCD_DATA7                            = IOMUX_PAD(0x0314, 0x00A4, 7, 0x0654, 1, 0),
+
+	MX7D_PAD_EPDC_BDR1__EPDC_BDR1                            = IOMUX_PAD(0x0318, 0x00A8, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN                          = IOMUX_PAD(0x0318, 0x00A8, 1, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK                         = IOMUX_PAD(0x0318, 0x00A8, 2, 0x0578, 1, 0),
+	MX7D_PAD_EPDC_BDR1__EIM_AD8                              = IOMUX_PAD(0x0318, 0x00A8, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR1__GPIO2_IO29                           = IOMUX_PAD(0x0318, 0x00A8, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR1__LCD_ENABLE                           = IOMUX_PAD(0x0318, 0x00A8, 6, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_BDR1__LCD_DATA6                            = IOMUX_PAD(0x0318, 0x00A8, 7, 0x0650, 1, 0),
+
+	MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM                      = IOMUX_PAD(0x031C, 0x00AC, 0, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA                    = IOMUX_PAD(0x031C, 0x00AC, 1, 0x05CC, 0, 0),
+	MX7D_PAD_EPDC_PWR_COM__ENET2_CRS                         = IOMUX_PAD(0x031C, 0x00AC, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_PWR_COM__EIM_AD9                           = IOMUX_PAD(0x031C, 0x00AC, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30                        = IOMUX_PAD(0x031C, 0x00AC, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC                         = IOMUX_PAD(0x031C, 0x00AC, 6, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_PWR_COM__LCD_DATA11                        = IOMUX_PAD(0x031C, 0x00AC, 7, 0x0664, 1, 0),
+
+	MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                    = IOMUX_PAD(0x0320, 0x00B0, 0, 0x0580, 0, 0),
+	MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB                   = IOMUX_PAD(0x0320, 0x00B0, 1, 0x05D0, 0, 0),
+	MX7D_PAD_EPDC_PWR_STAT__ENET2_COL                        = IOMUX_PAD(0x0320, 0x00B0, 2, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1                        = IOMUX_PAD(0x0320, 0x00B0, 4, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31                       = IOMUX_PAD(0x0320, 0x00B0, 5, 0x0000, 0, 0),
+	MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC                        = IOMUX_PAD(0x0320, 0x00B0, 6, 0x0698, 1, 0),
+	MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12                       = IOMUX_PAD(0x0320, 0x00B0, 7, 0x0668, 1, 0),
+
+	MX7D_PAD_LCD_CLK__LCD_CLK                                = IOMUX_PAD(0x0324, 0x00B4, 0, 0x0000, 0, 0),
+	MX7D_PAD_LCD_CLK__ECSPI4_MISO                            = IOMUX_PAD(0x0324, 0x00B4, 1, 0x0558, 0, 0),
+	MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN                   = IOMUX_PAD(0x0324, 0x00B4, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_CLK__CSI_DATA16                             = IOMUX_PAD(0x0324, 0x00B4, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_CLK__UART2_DCE_RX                           = IOMUX_PAD(0x0324, 0x00B4, 4, 0x06FC, 0, 0),
+	MX7D_PAD_LCD_CLK__UART2_DTE_TX                           = IOMUX_PAD(0x0324, 0x00B4, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_CLK__GPIO3_IO0                              = IOMUX_PAD(0x0324, 0x00B4, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_ENABLE__LCD_ENABLE                          = IOMUX_PAD(0x0328, 0x00B8, 0, 0x0000, 0, 0),
+	MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI                         = IOMUX_PAD(0x0328, 0x00B8, 1, 0x055C, 0, 0),
+	MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN                = IOMUX_PAD(0x0328, 0x00B8, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_ENABLE__CSI_DATA17                          = IOMUX_PAD(0x0328, 0x00B8, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_ENABLE__UART2_DCE_TX                        = IOMUX_PAD(0x0328, 0x00B8, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_ENABLE__UART2_DTE_RX                        = IOMUX_PAD(0x0328, 0x00B8, 4, 0x06FC, 1, 0),
+	MX7D_PAD_LCD_ENABLE__GPIO3_IO1                           = IOMUX_PAD(0x0328, 0x00B8, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_HSYNC__LCD_HSYNC                            = IOMUX_PAD(0x032C, 0x00BC, 0, 0x0000, 0, 0),
+	MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK                          = IOMUX_PAD(0x032C, 0x00BC, 1, 0x0554, 0, 0),
+	MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN                 = IOMUX_PAD(0x032C, 0x00BC, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_HSYNC__CSI_DATA18                           = IOMUX_PAD(0x032C, 0x00BC, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS                        = IOMUX_PAD(0x032C, 0x00BC, 4, 0x06F8, 0, 0),
+	MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS                        = IOMUX_PAD(0x032C, 0x00BC, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_HSYNC__GPIO3_IO2                            = IOMUX_PAD(0x032C, 0x00BC, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_VSYNC__LCD_VSYNC                            = IOMUX_PAD(0x0330, 0x00C0, 0, 0x0698, 2, 0),
+	MX7D_PAD_LCD_VSYNC__ECSPI4_SS0                           = IOMUX_PAD(0x0330, 0x00C0, 1, 0x0560, 0, 0),
+	MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN                 = IOMUX_PAD(0x0330, 0x00C0, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_VSYNC__CSI_DATA19                           = IOMUX_PAD(0x0330, 0x00C0, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS                        = IOMUX_PAD(0x0330, 0x00C0, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS                        = IOMUX_PAD(0x0330, 0x00C0, 4, 0x06F8, 1, 0),
+	MX7D_PAD_LCD_VSYNC__GPIO3_IO3                            = IOMUX_PAD(0x0330, 0x00C0, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_RESET__LCD_RESET                            = IOMUX_PAD(0x0334, 0x00C4, 0, 0x0000, 0, 0),
+	MX7D_PAD_LCD_RESET__GPT1_COMPARE1                        = IOMUX_PAD(0x0334, 0x00C4, 1, 0x0000, 0, 0),
+	MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI                  = IOMUX_PAD(0x0334, 0x00C4, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_RESET__CSI_FIELD                            = IOMUX_PAD(0x0334, 0x00C4, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_RESET__EIM_DTACK_B                          = IOMUX_PAD(0x0334, 0x00C4, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_RESET__GPIO3_IO4                            = IOMUX_PAD(0x0334, 0x00C4, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA00__LCD_DATA0                           = IOMUX_PAD(0x0338, 0x00C8, 0, 0x0638, 2, 0),
+	MX7D_PAD_LCD_DATA00__GPT1_COMPARE2                       = IOMUX_PAD(0x0338, 0x00C8, 1, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA00__CSI_DATA20                          = IOMUX_PAD(0x0338, 0x00C8, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA00__EIM_DATA0                           = IOMUX_PAD(0x0338, 0x00C8, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA00__GPIO3_IO5                           = IOMUX_PAD(0x0338, 0x00C8, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0                       = IOMUX_PAD(0x0338, 0x00C8, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA01__LCD_DATA1                           = IOMUX_PAD(0x033C, 0x00CC, 0, 0x063C, 2, 0),
+	MX7D_PAD_LCD_DATA01__GPT1_COMPARE3                       = IOMUX_PAD(0x033C, 0x00CC, 1, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA01__CSI_DATA21                          = IOMUX_PAD(0x033C, 0x00CC, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA01__EIM_DATA1                           = IOMUX_PAD(0x033C, 0x00CC, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA01__GPIO3_IO6                           = IOMUX_PAD(0x033C, 0x00CC, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1                       = IOMUX_PAD(0x033C, 0x00CC, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA02__LCD_DATA2                           = IOMUX_PAD(0x0340, 0x00D0, 0, 0x0640, 2, 0),
+	MX7D_PAD_LCD_DATA02__GPT1_CLK                            = IOMUX_PAD(0x0340, 0x00D0, 1, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA02__CSI_DATA22                          = IOMUX_PAD(0x0340, 0x00D0, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA02__EIM_DATA2                           = IOMUX_PAD(0x0340, 0x00D0, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA02__GPIO3_IO7                           = IOMUX_PAD(0x0340, 0x00D0, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2                       = IOMUX_PAD(0x0340, 0x00D0, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA03__LCD_DATA3                           = IOMUX_PAD(0x0344, 0x00D4, 0, 0x0644, 2, 0),
+	MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1                       = IOMUX_PAD(0x0344, 0x00D4, 1, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA03__CSI_DATA23                          = IOMUX_PAD(0x0344, 0x00D4, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA03__EIM_DATA3                           = IOMUX_PAD(0x0344, 0x00D4, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA03__GPIO3_IO8                           = IOMUX_PAD(0x0344, 0x00D4, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3                       = IOMUX_PAD(0x0344, 0x00D4, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA04__LCD_DATA4                           = IOMUX_PAD(0x0348, 0x00D8, 0, 0x0648, 2, 0),
+	MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2                       = IOMUX_PAD(0x0348, 0x00D8, 1, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA04__CSI_VSYNC                           = IOMUX_PAD(0x0348, 0x00D8, 3, 0x0520, 0, 0),
+	MX7D_PAD_LCD_DATA04__EIM_DATA4                           = IOMUX_PAD(0x0348, 0x00D8, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA04__GPIO3_IO9                           = IOMUX_PAD(0x0348, 0x00D8, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4                       = IOMUX_PAD(0x0348, 0x00D8, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA05__LCD_DATA5                           = IOMUX_PAD(0x034C, 0x00DC, 0, 0x064C, 2, 0),
+	MX7D_PAD_LCD_DATA05__CSI_HSYNC                           = IOMUX_PAD(0x034C, 0x00DC, 3, 0x0518, 0, 0),
+	MX7D_PAD_LCD_DATA05__EIM_DATA5                           = IOMUX_PAD(0x034C, 0x00DC, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA05__GPIO3_IO10                          = IOMUX_PAD(0x034C, 0x00DC, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5                       = IOMUX_PAD(0x034C, 0x00DC, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA06__LCD_DATA6                           = IOMUX_PAD(0x0350, 0x00E0, 0, 0x0650, 2, 0),
+	MX7D_PAD_LCD_DATA06__CSI_PIXCLK                          = IOMUX_PAD(0x0350, 0x00E0, 3, 0x051C, 0, 0),
+	MX7D_PAD_LCD_DATA06__EIM_DATA6                           = IOMUX_PAD(0x0350, 0x00E0, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA06__GPIO3_IO11                          = IOMUX_PAD(0x0350, 0x00E0, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6                       = IOMUX_PAD(0x0350, 0x00E0, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA07__LCD_DATA7                           = IOMUX_PAD(0x0354, 0x00E4, 0, 0x0654, 2, 0),
+	MX7D_PAD_LCD_DATA07__CSI_MCLK                            = IOMUX_PAD(0x0354, 0x00E4, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA07__EIM_DATA7                           = IOMUX_PAD(0x0354, 0x00E4, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA07__GPIO3_IO12                          = IOMUX_PAD(0x0354, 0x00E4, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7                       = IOMUX_PAD(0x0354, 0x00E4, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA08__LCD_DATA8                           = IOMUX_PAD(0x0358, 0x00E8, 0, 0x0658, 2, 0),
+	MX7D_PAD_LCD_DATA08__CSI_DATA9                           = IOMUX_PAD(0x0358, 0x00E8, 3, 0x0514, 0, 0),
+	MX7D_PAD_LCD_DATA08__EIM_DATA8                           = IOMUX_PAD(0x0358, 0x00E8, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA08__GPIO3_IO13                          = IOMUX_PAD(0x0358, 0x00E8, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8                       = IOMUX_PAD(0x0358, 0x00E8, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA09__LCD_DATA9                           = IOMUX_PAD(0x035C, 0x00EC, 0, 0x065C, 2, 0),
+	MX7D_PAD_LCD_DATA09__CSI_DATA8                           = IOMUX_PAD(0x035C, 0x00EC, 3, 0x0510, 0, 0),
+	MX7D_PAD_LCD_DATA09__EIM_DATA9                           = IOMUX_PAD(0x035C, 0x00EC, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA09__GPIO3_IO14                          = IOMUX_PAD(0x035C, 0x00EC, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9                       = IOMUX_PAD(0x035C, 0x00EC, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA10__LCD_DATA10                          = IOMUX_PAD(0x0360, 0x00F0, 0, 0x0660, 2, 0),
+	MX7D_PAD_LCD_DATA10__CSI_DATA7                           = IOMUX_PAD(0x0360, 0x00F0, 3, 0x050C, 0, 0),
+	MX7D_PAD_LCD_DATA10__EIM_DATA10                          = IOMUX_PAD(0x0360, 0x00F0, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA10__GPIO3_IO15                          = IOMUX_PAD(0x0360, 0x00F0, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10                      = IOMUX_PAD(0x0360, 0x00F0, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA11__LCD_DATA11                          = IOMUX_PAD(0x0364, 0x00F4, 0, 0x0664, 2, 0),
+	MX7D_PAD_LCD_DATA11__CSI_DATA6                           = IOMUX_PAD(0x0364, 0x00F4, 3, 0x0508, 0, 0),
+	MX7D_PAD_LCD_DATA11__EIM_DATA11                          = IOMUX_PAD(0x0364, 0x00F4, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA11__GPIO3_IO16                          = IOMUX_PAD(0x0364, 0x00F4, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11                      = IOMUX_PAD(0x0364, 0x00F4, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA12__LCD_DATA12                          = IOMUX_PAD(0x0368, 0x00F8, 0, 0x0668, 2, 0),
+	MX7D_PAD_LCD_DATA12__CSI_DATA5                           = IOMUX_PAD(0x0368, 0x00F8, 3, 0x0504, 0, 0),
+	MX7D_PAD_LCD_DATA12__EIM_DATA12                          = IOMUX_PAD(0x0368, 0x00F8, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA12__GPIO3_IO17                          = IOMUX_PAD(0x0368, 0x00F8, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12                      = IOMUX_PAD(0x0368, 0x00F8, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA13__LCD_DATA13                          = IOMUX_PAD(0x036C, 0x00FC, 0, 0x066C, 1, 0),
+	MX7D_PAD_LCD_DATA13__CSI_DATA4                           = IOMUX_PAD(0x036C, 0x00FC, 3, 0x0500, 0, 0),
+	MX7D_PAD_LCD_DATA13__EIM_DATA13                          = IOMUX_PAD(0x036C, 0x00FC, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA13__GPIO3_IO18                          = IOMUX_PAD(0x036C, 0x00FC, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13                      = IOMUX_PAD(0x036C, 0x00FC, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA14__LCD_DATA14                          = IOMUX_PAD(0x0370, 0x0100, 0, 0x0670, 1, 0),
+	MX7D_PAD_LCD_DATA14__CSI_DATA3                           = IOMUX_PAD(0x0370, 0x0100, 3, 0x04FC, 0, 0),
+	MX7D_PAD_LCD_DATA14__EIM_DATA14                          = IOMUX_PAD(0x0370, 0x0100, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA14__GPIO3_IO19                          = IOMUX_PAD(0x0370, 0x0100, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14                      = IOMUX_PAD(0x0370, 0x0100, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA15__LCD_DATA15                          = IOMUX_PAD(0x0374, 0x0104, 0, 0x0674, 1, 0),
+	MX7D_PAD_LCD_DATA15__CSI_DATA2                           = IOMUX_PAD(0x0374, 0x0104, 3, 0x04F8, 0, 0),
+	MX7D_PAD_LCD_DATA15__EIM_DATA15                          = IOMUX_PAD(0x0374, 0x0104, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA15__GPIO3_IO20                          = IOMUX_PAD(0x0374, 0x0104, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15                      = IOMUX_PAD(0x0374, 0x0104, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA16__LCD_DATA16                          = IOMUX_PAD(0x0378, 0x0108, 0, 0x0678, 2, 0),
+	MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4                      = IOMUX_PAD(0x0378, 0x0108, 1, 0x0594, 0, 0),
+	MX7D_PAD_LCD_DATA16__CSI_DATA1                           = IOMUX_PAD(0x0378, 0x0108, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA16__EIM_CRE                             = IOMUX_PAD(0x0378, 0x0108, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA16__GPIO3_IO21                          = IOMUX_PAD(0x0378, 0x0108, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16                      = IOMUX_PAD(0x0378, 0x0108, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA17__LCD_DATA17                          = IOMUX_PAD(0x037C, 0x010C, 0, 0x067C, 2, 0),
+	MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5                      = IOMUX_PAD(0x037C, 0x010C, 1, 0x0598, 0, 0),
+	MX7D_PAD_LCD_DATA17__CSI_DATA0                           = IOMUX_PAD(0x037C, 0x010C, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN                    = IOMUX_PAD(0x037C, 0x010C, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA17__GPIO3_IO22                          = IOMUX_PAD(0x037C, 0x010C, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17                      = IOMUX_PAD(0x037C, 0x010C, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA18__LCD_DATA18                          = IOMUX_PAD(0x0380, 0x0110, 0, 0x0680, 2, 0),
+	MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6                      = IOMUX_PAD(0x0380, 0x0110, 1, 0x059C, 0, 0),
+	MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO                 = IOMUX_PAD(0x0380, 0x0110, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA18__CSI_DATA15                          = IOMUX_PAD(0x0380, 0x0110, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA18__EIM_CS2_B                           = IOMUX_PAD(0x0380, 0x0110, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA18__GPIO3_IO23                          = IOMUX_PAD(0x0380, 0x0110, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18                      = IOMUX_PAD(0x0380, 0x0110, 6, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA19__EIM_CS3_B                           = IOMUX_PAD(0x0384, 0x0114, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA19__GPIO3_IO24                          = IOMUX_PAD(0x0384, 0x0114, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19                      = IOMUX_PAD(0x0384, 0x0114, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA19__LCD_DATA19                          = IOMUX_PAD(0x0384, 0x0114, 0, 0x0684, 2, 0),
+	MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7                      = IOMUX_PAD(0x0384, 0x0114, 1, 0x05A0, 0, 0),
+	MX7D_PAD_LCD_DATA19__CSI_DATA14                          = IOMUX_PAD(0x0384, 0x0114, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA20__EIM_ADDR23                          = IOMUX_PAD(0x0388, 0x0118, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA20__GPIO3_IO25                          = IOMUX_PAD(0x0388, 0x0118, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA20__I2C3_SCL                            = IOMUX_PAD(0x0388, 0x0118, IOMUX_CONFIG_SION | 6, 0x05E4, 1, 0),
+
+	MX7D_PAD_LCD_DATA20__LCD_DATA20                          = IOMUX_PAD(0x0388, 0x0118, 0, 0x0688, 2, 0),
+	MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4                      = IOMUX_PAD(0x0388, 0x0118, 1, 0x05BC, 0, 0),
+	MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT               = IOMUX_PAD(0x0388, 0x0118, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA20__CSI_DATA13                          = IOMUX_PAD(0x0388, 0x0118, 3, 0x0000, 0, 0),
+
+	MX7D_PAD_LCD_DATA21__LCD_DATA21                          = IOMUX_PAD(0x038C, 0x011C, 0, 0x068C, 2, 0),
+	MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5                      = IOMUX_PAD(0x038C, 0x011C, 1, 0x05C0, 0, 0),
+	MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT               = IOMUX_PAD(0x038C, 0x011C, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA21__CSI_DATA12                          = IOMUX_PAD(0x038C, 0x011C, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA21__EIM_ADDR24                          = IOMUX_PAD(0x038C, 0x011C, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA21__GPIO3_IO26                          = IOMUX_PAD(0x038C, 0x011C, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA21__I2C3_SDA                            = IOMUX_PAD(0x038C, 0x011C, IOMUX_CONFIG_SION | 6, 0x05E8, 1, 0),
+
+	MX7D_PAD_LCD_DATA22__LCD_DATA22                          = IOMUX_PAD(0x0390, 0x0120, 0, 0x0690, 2, 0),
+	MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6                      = IOMUX_PAD(0x0390, 0x0120, 1, 0x05C4, 0, 0),
+	MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT               = IOMUX_PAD(0x0390, 0x0120, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA22__CSI_DATA11                          = IOMUX_PAD(0x0390, 0x0120, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA22__EIM_ADDR25                          = IOMUX_PAD(0x0390, 0x0120, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA22__GPIO3_IO27                          = IOMUX_PAD(0x0390, 0x0120, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA22__I2C4_SCL                            = IOMUX_PAD(0x0390, 0x0120, IOMUX_CONFIG_SION | 6, 0x05EC, 1, 0),
+
+	MX7D_PAD_LCD_DATA23__LCD_DATA23                          = IOMUX_PAD(0x0394, 0x0124, 0, 0x0694, 2, 0),
+	MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7                      = IOMUX_PAD(0x0394, 0x0124, 1, 0x05C8, 0, 0),
+	MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT               = IOMUX_PAD(0x0394, 0x0124, 2, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA23__CSI_DATA10                          = IOMUX_PAD(0x0394, 0x0124, 3, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA23__EIM_ADDR26                          = IOMUX_PAD(0x0394, 0x0124, 4, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA23__GPIO3_IO28                          = IOMUX_PAD(0x0394, 0x0124, 5, 0x0000, 0, 0),
+	MX7D_PAD_LCD_DATA23__I2C4_SDA                            = IOMUX_PAD(0x0394, 0x0124, IOMUX_CONFIG_SION | 6, 0x05F0, 1, 0),
+
+	MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                     = IOMUX_PAD(0x0398, 0x0128, 0, 0x06F4, 0, 0),
+
+	MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                     = IOMUX_PAD(0x0398, 0x0128, 0, 0x0000, 0, 0),
+	MX7D_PAD_UART1_RX_DATA__I2C1_SCL                         = IOMUX_PAD(0x0398, 0x0128, IOMUX_CONFIG_SION | 1, 0x0000, 0, 0),
+	MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY                   = IOMUX_PAD(0x0398, 0x0128, 2, 0x0000, 0, 0),
+	MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1                       = IOMUX_PAD(0x0398, 0x0128, 3, 0x0000, 0, 0),
+	MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN             = IOMUX_PAD(0x0398, 0x0128, 4, 0x0000, 0, 0),
+	MX7D_PAD_UART1_RX_DATA__GPIO4_IO0                        = IOMUX_PAD(0x0398, 0x0128, 5, 0x0000, 0, 0),
+	MX7D_PAD_UART1_RX_DATA__ENET1_MDIO                       = IOMUX_PAD(0x0398, 0x0128, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX                     = IOMUX_PAD(0x039C, 0x012C, 0, 0x0000, 0, 0),
+
+	MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX                     = IOMUX_PAD(0x039C, 0x012C, 0, 0x06F4, 1, 0),
+	MX7D_PAD_UART1_TX_DATA__I2C1_SDA                         = IOMUX_PAD(0x039C, 0x012C, IOMUX_CONFIG_SION | 1, 0x05D8, 0, 0),
+	MX7D_PAD_UART1_TX_DATA__SAI3_MCLK                        = IOMUX_PAD(0x039C, 0x012C, 2, 0x0000, 0, 0),
+	MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2                       = IOMUX_PAD(0x039C, 0x012C, 3, 0x0000, 0, 0),
+	MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT            = IOMUX_PAD(0x039C, 0x012C, 4, 0x0000, 0, 0),
+	MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                        = IOMUX_PAD(0x039C, 0x012C, 5, 0x0000, 0, 0),
+	MX7D_PAD_UART1_TX_DATA__ENET1_MDC                        = IOMUX_PAD(0x039C, 0x012C, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                     = IOMUX_PAD(0x03A0, 0x0130, 0, 0x06FC, 2, 0),
+
+	MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                     = IOMUX_PAD(0x03A0, 0x0130, 0, 0x0000, 0, 0),
+	MX7D_PAD_UART2_RX_DATA__I2C2_SCL                         = IOMUX_PAD(0x03A0, 0x0130, IOMUX_CONFIG_SION | 1, 0x0000, 0, 0),
+	MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK                     = IOMUX_PAD(0x03A0, 0x0130, 2, 0x0000, 0, 0),
+	MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3                       = IOMUX_PAD(0x03A0, 0x0130, 3, 0x0000, 0, 0),
+	MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN             = IOMUX_PAD(0x03A0, 0x0130, 4, 0x0000, 0, 0),
+	MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                        = IOMUX_PAD(0x03A0, 0x0130, 5, 0x0000, 0, 0),
+	MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                       = IOMUX_PAD(0x03A0, 0x0130, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                     = IOMUX_PAD(0x03A4, 0x0134, 0, 0x0000, 0, 0),
+
+	MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                     = IOMUX_PAD(0x03A4, 0x0134, 0, 0x06FC, 3, 0),
+	MX7D_PAD_UART2_TX_DATA__I2C2_SDA                         = IOMUX_PAD(0x03A4, 0x0134, IOMUX_CONFIG_SION | 1, 0x05E0, 0, 0),
+	MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                    = IOMUX_PAD(0x03A4, 0x0134, 2, 0x06C8, 0, 0),
+	MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                       = IOMUX_PAD(0x03A4, 0x0134, 3, 0x0000, 0, 0),
+	MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT            = IOMUX_PAD(0x03A4, 0x0134, 4, 0x0000, 0, 0),
+	MX7D_PAD_UART2_TX_DATA__GPIO4_IO3                        = IOMUX_PAD(0x03A4, 0x0134, 5, 0x0000, 0, 0),
+	MX7D_PAD_UART2_TX_DATA__ENET2_MDC                        = IOMUX_PAD(0x03A4, 0x0134, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX                     = IOMUX_PAD(0x03A8, 0x0138, 0, 0x0704, 2, 0),
+
+	MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX                     = IOMUX_PAD(0x03A8, 0x0138, 0, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC                      = IOMUX_PAD(0x03A8, 0x0138, 1, 0x072C, 0, 0),
+	MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC                     = IOMUX_PAD(0x03A8, 0x0138, 2, 0x06CC, 0, 0),
+	MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO                      = IOMUX_PAD(0x03A8, 0x0138, 3, 0x0528, 0, 0),
+	MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN             = IOMUX_PAD(0x03A8, 0x0138, 4, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RX_DATA__GPIO4_IO4                        = IOMUX_PAD(0x03A8, 0x0138, 5, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RX_DATA__SD1_LCTL                         = IOMUX_PAD(0x03A8, 0x0138, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX                     = IOMUX_PAD(0x03AC, 0x013C, 0, 0x0000, 0, 0),
+
+	MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX                     = IOMUX_PAD(0x03AC, 0x013C, 0, 0x0704, 3, 0),
+	MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR                     = IOMUX_PAD(0x03AC, 0x013C, 1, 0x0000, 0, 0),
+	MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK                     = IOMUX_PAD(0x03AC, 0x013C, 2, 0x06D0, 0, 0),
+	MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI                      = IOMUX_PAD(0x03AC, 0x013C, 3, 0x052C, 0, 0),
+	MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT            = IOMUX_PAD(0x03AC, 0x013C, 4, 0x0000, 0, 0),
+	MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                        = IOMUX_PAD(0x03AC, 0x013C, 5, 0x0000, 0, 0),
+	MX7D_PAD_UART3_TX_DATA__SD2_LCTL                         = IOMUX_PAD(0x03AC, 0x013C, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                      = IOMUX_PAD(0x03B0, 0x0140, 0, 0x0700, 2, 0),
+
+	MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                      = IOMUX_PAD(0x03B0, 0x0140, 0, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                        = IOMUX_PAD(0x03B0, 0x0140, 1, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0                      = IOMUX_PAD(0x03B0, 0x0140, 2, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK                        = IOMUX_PAD(0x03B0, 0x0140, 3, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN               = IOMUX_PAD(0x03B0, 0x0140, 4, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RTS_B__GPIO4_IO6                          = IOMUX_PAD(0x03B0, 0x0140, 5, 0x0000, 0, 0),
+	MX7D_PAD_UART3_RTS_B__SD3_LCTL                           = IOMUX_PAD(0x03B0, 0x0140, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS                      = IOMUX_PAD(0x03B4, 0x0144, 0, 0x0000, 0, 0),
+
+	MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS                      = IOMUX_PAD(0x03B4, 0x0144, 0, 0x0700, 3, 0),
+	MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR                       = IOMUX_PAD(0x03B4, 0x0144, 1, 0x0000, 0, 0),
+	MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC                       = IOMUX_PAD(0x03B4, 0x0144, 2, 0x06D4, 0, 0),
+	MX7D_PAD_UART3_CTS_B__ECSPI1_SS0                         = IOMUX_PAD(0x03B4, 0x0144, 3, 0x0530, 0, 0),
+	MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT              = IOMUX_PAD(0x03B4, 0x0144, 4, 0x0000, 0, 0),
+	MX7D_PAD_UART3_CTS_B__GPIO4_IO7                          = IOMUX_PAD(0x03B4, 0x0144, 5, 0x0000, 0, 0),
+	MX7D_PAD_UART3_CTS_B__SD1_VSELECT                        = IOMUX_PAD(0x03B4, 0x0144, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_I2C1_SCL__I2C1_SCL                              = IOMUX_PAD(0x03B8, 0x0148, IOMUX_CONFIG_SION | 0, 0x05D4, 1, 0),
+	MX7D_PAD_I2C1_SCL__UART4_DCE_CTS                         = IOMUX_PAD(0x03B8, 0x0148, 1, 0x0000, 0, 0),
+	MX7D_PAD_I2C1_SCL__UART4_DTE_RTS                         = IOMUX_PAD(0x03B8, 0x0148, 1, 0x0708, 0, 0),
+	MX7D_PAD_I2C1_SCL__FLEXCAN1_RX                           = IOMUX_PAD(0x03B8, 0x0148, 2, 0x04DC, 1, 0),
+	MX7D_PAD_I2C1_SCL__ECSPI3_MISO                           = IOMUX_PAD(0x03B8, 0x0148, 3, 0x0548, 0, 0),
+	MX7D_PAD_I2C1_SCL__GPIO4_IO8                             = IOMUX_PAD(0x03B8, 0x0148, 5, 0x0000, 0, 0),
+	MX7D_PAD_I2C1_SCL__SD2_VSELECT                           = IOMUX_PAD(0x03B8, 0x0148, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_I2C1_SDA__I2C1_SDA                              = IOMUX_PAD(0x03BC, 0x014C, IOMUX_CONFIG_SION | 0, 0x05D8, 1, 0),
+	MX7D_PAD_I2C1_SDA__UART4_DCE_RTS                         = IOMUX_PAD(0x03BC, 0x014C, 1, 0x0708, 1, 0),
+	MX7D_PAD_I2C1_SDA__UART4_DTE_CTS                         = IOMUX_PAD(0x03BC, 0x014C, 1, 0x0000, 0, 0),
+	MX7D_PAD_I2C1_SDA__FLEXCAN1_TX                           = IOMUX_PAD(0x03BC, 0x014C, 2, 0x0000, 0, 0),
+	MX7D_PAD_I2C1_SDA__ECSPI3_MOSI                           = IOMUX_PAD(0x03BC, 0x014C, 3, 0x054C, 0, 0),
+	MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1                     = IOMUX_PAD(0x03BC, 0x014C, 4, 0x0564, 1, 0),
+	MX7D_PAD_I2C1_SDA__GPIO4_IO9                             = IOMUX_PAD(0x03BC, 0x014C, 5, 0x0000, 0, 0),
+	MX7D_PAD_I2C1_SDA__SD3_VSELECT                           = IOMUX_PAD(0x03BC, 0x014C, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_I2C2_SCL__I2C2_SCL                              = IOMUX_PAD(0x03C0, 0x0150, IOMUX_CONFIG_SION | 0, 0x05DC, 1, 0),
+	MX7D_PAD_I2C2_SCL__UART4_DCE_RX                          = IOMUX_PAD(0x03C0, 0x0150, 1, 0x070C, 0, 0),
+	MX7D_PAD_I2C2_SCL__UART4_DTE_TX                          = IOMUX_PAD(0x03C0, 0x0150, 1, 0x0000, 0, 0),
+	MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B                          = IOMUX_PAD(0x03C0, 0x0150, 2, 0x0000, 0, 0),
+	MX7D_PAD_I2C2_SCL__ECSPI3_SCLK                           = IOMUX_PAD(0x03C0, 0x0150, 3, 0x0544, 0, 0),
+	MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2                     = IOMUX_PAD(0x03C0, 0x0150, 4, 0x0570, 2, 0),
+	MX7D_PAD_I2C2_SCL__GPIO4_IO10                            = IOMUX_PAD(0x03C0, 0x0150, 5, 0x0000, 0, 0),
+	MX7D_PAD_I2C2_SCL__SD3_CD_B                              = IOMUX_PAD(0x03C0, 0x0150, 6, 0x0738, 1, 0),
+
+	MX7D_PAD_I2C2_SDA__I2C2_SDA                              = IOMUX_PAD(0x03C4, 0x0154, IOMUX_CONFIG_SION | 0, 0x05E0, 1, 0),
+	MX7D_PAD_I2C2_SDA__UART4_DCE_TX                          = IOMUX_PAD(0x03C4, 0x0154, 1, 0x0000, 0, 0),
+	MX7D_PAD_I2C2_SDA__UART4_DTE_RX                          = IOMUX_PAD(0x03C4, 0x0154, 1, 0x070C, 1, 0),
+	MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB                  = IOMUX_PAD(0x03C4, 0x0154, 2, 0x0000, 0, 0),
+	MX7D_PAD_I2C2_SDA__ECSPI3_SS0                            = IOMUX_PAD(0x03C4, 0x0154, 3, 0x0550, 0, 0),
+	MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3                     = IOMUX_PAD(0x03C4, 0x0154, 4, 0x0000, 0, 0),
+	MX7D_PAD_I2C2_SDA__GPIO4_IO11                            = IOMUX_PAD(0x03C4, 0x0154, 5, 0x0000, 0, 0),
+	MX7D_PAD_I2C2_SDA__SD3_WP                                = IOMUX_PAD(0x03C4, 0x0154, 6, 0x073C, 1, 0),
+
+	MX7D_PAD_I2C3_SCL__I2C3_SCL                              = IOMUX_PAD(0x03C8, 0x0158, IOMUX_CONFIG_SION | 0, 0x05E4, 2, 0),
+	MX7D_PAD_I2C3_SCL__UART5_DCE_CTS                         = IOMUX_PAD(0x03C8, 0x0158, 1, 0x0000, 0, 0),
+	MX7D_PAD_I2C3_SCL__UART5_DTE_RTS                         = IOMUX_PAD(0x03C8, 0x0158, 1, 0x0710, 0, 0),
+	MX7D_PAD_I2C3_SCL__FLEXCAN2_RX                           = IOMUX_PAD(0x03C8, 0x0158, 2, 0x04E0, 1, 0),
+	MX7D_PAD_I2C3_SCL__CSI_VSYNC                             = IOMUX_PAD(0x03C8, 0x0158, 3, 0x0520, 1, 0),
+	MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0                       = IOMUX_PAD(0x03C8, 0x0158, 4, 0x06D8, 1, 0),
+	MX7D_PAD_I2C3_SCL__GPIO4_IO12                            = IOMUX_PAD(0x03C8, 0x0158, 5, 0x0000, 0, 0),
+	MX7D_PAD_I2C3_SCL__EPDC_BDR0                             = IOMUX_PAD(0x03C8, 0x0158, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_I2C3_SDA__I2C3_SDA                              = IOMUX_PAD(0x03CC, 0x015C, IOMUX_CONFIG_SION | 0, 0x05E8, 2, 0),
+	MX7D_PAD_I2C3_SDA__UART5_DCE_RTS                         = IOMUX_PAD(0x03CC, 0x015C, 1, 0x0710, 1, 0),
+	MX7D_PAD_I2C3_SDA__UART5_DTE_CTS                         = IOMUX_PAD(0x03CC, 0x015C, 1, 0x0000, 0, 0),
+	MX7D_PAD_I2C3_SDA__FLEXCAN2_TX                           = IOMUX_PAD(0x03CC, 0x015C, 2, 0x0000, 0, 0),
+	MX7D_PAD_I2C3_SDA__CSI_HSYNC                             = IOMUX_PAD(0x03CC, 0x015C, 3, 0x0518, 1, 0),
+	MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1                       = IOMUX_PAD(0x03CC, 0x015C, 4, 0x06DC, 1, 0),
+	MX7D_PAD_I2C3_SDA__GPIO4_IO13                            = IOMUX_PAD(0x03CC, 0x015C, 5, 0x0000, 0, 0),
+	MX7D_PAD_I2C3_SDA__EPDC_BDR1                             = IOMUX_PAD(0x03CC, 0x015C, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_I2C4_SCL__I2C4_SCL                              = IOMUX_PAD(0x03D0, 0x0160, IOMUX_CONFIG_SION | 0, 0x05EC, 2, 0),
+	MX7D_PAD_I2C4_SCL__UART5_DCE_RX                          = IOMUX_PAD(0x03D0, 0x0160, 1, 0x0714, 0, 0),
+	MX7D_PAD_I2C4_SCL__UART5_DTE_TX                          = IOMUX_PAD(0x03D0, 0x0160, 1, 0x0000, 0, 0),
+	MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B                          = IOMUX_PAD(0x03D0, 0x0160, 2, 0x0000, 0, 0),
+	MX7D_PAD_I2C4_SCL__CSI_PIXCLK                            = IOMUX_PAD(0x03D0, 0x0160, 3, 0x051C, 1, 0),
+	MX7D_PAD_I2C4_SCL__USB_OTG1_ID                           = IOMUX_PAD(0x03D0, 0x0160, 4, 0x0734, 1, 0),
+	MX7D_PAD_I2C4_SCL__GPIO4_IO14                            = IOMUX_PAD(0x03D0, 0x0160, 5, 0x0000, 0, 0),
+	MX7D_PAD_I2C4_SCL__EPDC_VCOM0                            = IOMUX_PAD(0x03D0, 0x0160, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_I2C4_SDA__I2C4_SDA                              = IOMUX_PAD(0x03D4, 0x0164, IOMUX_CONFIG_SION | 0, 0x05F0, 2, 0),
+	MX7D_PAD_I2C4_SDA__UART5_DCE_TX                          = IOMUX_PAD(0x03D4, 0x0164, 1, 0x0000, 0, 0),
+	MX7D_PAD_I2C4_SDA__UART5_DTE_RX                          = IOMUX_PAD(0x03D4, 0x0164, 1, 0x0714, 1, 0),
+	MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB                  = IOMUX_PAD(0x03D4, 0x0164, 2, 0x0000, 0, 0),
+	MX7D_PAD_I2C4_SDA__CSI_MCLK                              = IOMUX_PAD(0x03D4, 0x0164, 3, 0x0000, 0, 0),
+	MX7D_PAD_I2C4_SDA__USB_OTG2_ID                           = IOMUX_PAD(0x03D4, 0x0164, 4, 0x0730, 1, 0),
+	MX7D_PAD_I2C4_SDA__GPIO4_IO15                            = IOMUX_PAD(0x03D4, 0x0164, 5, 0x0000, 0, 0),
+	MX7D_PAD_I2C4_SDA__EPDC_VCOM1                            = IOMUX_PAD(0x03D4, 0x0164, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK                        = IOMUX_PAD(0x03D8, 0x0168, 0, 0x0524, 1, 0),
+	MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX                       = IOMUX_PAD(0x03D8, 0x0168, 1, 0x071C, 2, 0),
+	MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX                       = IOMUX_PAD(0x03D8, 0x0168, 1, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_SCLK__SD2_DATA4                          = IOMUX_PAD(0x03D8, 0x0168, 2, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_SCLK__CSI_DATA2                          = IOMUX_PAD(0x03D8, 0x0168, 3, 0x04F8, 1, 0),
+	MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16                         = IOMUX_PAD(0x03D8, 0x0168, 5, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM                       = IOMUX_PAD(0x03D8, 0x0168, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI                        = IOMUX_PAD(0x03DC, 0x016C, 0, 0x052C, 1, 0),
+	MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX                       = IOMUX_PAD(0x03DC, 0x016C, 1, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX                       = IOMUX_PAD(0x03DC, 0x016C, 1, 0x071C, 3, 0),
+	MX7D_PAD_ECSPI1_MOSI__SD2_DATA5                          = IOMUX_PAD(0x03DC, 0x016C, 2, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_MOSI__CSI_DATA3                          = IOMUX_PAD(0x03DC, 0x016C, 3, 0x04FC, 1, 0),
+	MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17                         = IOMUX_PAD(0x03DC, 0x016C, 5, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT                      = IOMUX_PAD(0x03DC, 0x016C, 6, 0x0580, 1, 0),
+
+	MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO                        = IOMUX_PAD(0x03E0, 0x0170, 0, 0x0528, 1, 0),
+	MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS                      = IOMUX_PAD(0x03E0, 0x0170, 1, 0x0718, 2, 0),
+	MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS                      = IOMUX_PAD(0x03E0, 0x0170, 1, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_MISO__SD2_DATA6                          = IOMUX_PAD(0x03E0, 0x0170, 2, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_MISO__CSI_DATA4                          = IOMUX_PAD(0x03E0, 0x0170, 3, 0x0500, 1, 0),
+	MX7D_PAD_ECSPI1_MISO__GPIO4_IO18                         = IOMUX_PAD(0x03E0, 0x0170, 5, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ                       = IOMUX_PAD(0x03E0, 0x0170, 6, 0x057C, 0, 0),
+
+	MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0                          = IOMUX_PAD(0x03E4, 0x0174, 0, 0x0530, 1, 0),
+	MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS                       = IOMUX_PAD(0x03E4, 0x0174, 1, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS                       = IOMUX_PAD(0x03E4, 0x0174, 1, 0x0718, 3, 0),
+	MX7D_PAD_ECSPI1_SS0__SD2_DATA7                           = IOMUX_PAD(0x03E4, 0x0174, 2, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_SS0__CSI_DATA5                           = IOMUX_PAD(0x03E4, 0x0174, 3, 0x0504, 1, 0),
+	MX7D_PAD_ECSPI1_SS0__GPIO4_IO19                          = IOMUX_PAD(0x03E4, 0x0174, 5, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3                      = IOMUX_PAD(0x03E4, 0x0174, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK                        = IOMUX_PAD(0x03E8, 0x0178, 0, 0x0534, 0, 0),
+	MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX                       = IOMUX_PAD(0x03E8, 0x0178, 1, 0x0724, 2, 0),
+	MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX                       = IOMUX_PAD(0x03E8, 0x0178, 1, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_SCLK__SD1_DATA4                          = IOMUX_PAD(0x03E8, 0x0178, 2, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_SCLK__CSI_DATA6                          = IOMUX_PAD(0x03E8, 0x0178, 3, 0x0508, 1, 0),
+	MX7D_PAD_ECSPI2_SCLK__LCD_DATA13                         = IOMUX_PAD(0x03E8, 0x0178, 4, 0x066C, 2, 0),
+	MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20                         = IOMUX_PAD(0x03E8, 0x0178, 5, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0                     = IOMUX_PAD(0x03E8, 0x0178, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI                        = IOMUX_PAD(0x03EC, 0x017C, 0, 0x053C, 0, 0),
+	MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX                       = IOMUX_PAD(0x03EC, 0x017C, 1, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX                       = IOMUX_PAD(0x03EC, 0x017C, 1, 0x0724, 3, 0),
+	MX7D_PAD_ECSPI2_MOSI__SD1_DATA5                          = IOMUX_PAD(0x03EC, 0x017C, 2, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_MOSI__CSI_DATA7                          = IOMUX_PAD(0x03EC, 0x017C, 3, 0x050C, 1, 0),
+	MX7D_PAD_ECSPI2_MOSI__LCD_DATA14                         = IOMUX_PAD(0x03EC, 0x017C, 4, 0x0670, 2, 0),
+	MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21                         = IOMUX_PAD(0x03EC, 0x017C, 5, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1                     = IOMUX_PAD(0x03EC, 0x017C, 6, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_MISO__GPIO4_IO22                         = IOMUX_PAD(0x03F0, 0x0180, 5, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2                     = IOMUX_PAD(0x03F0, 0x0180, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO                        = IOMUX_PAD(0x03F0, 0x0180, 0, 0x0538, 0, 0),
+	MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS                      = IOMUX_PAD(0x03F0, 0x0180, 1, 0x0720, 2, 0),
+	MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS                      = IOMUX_PAD(0x03F0, 0x0180, 1, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_MISO__SD1_DATA6                          = IOMUX_PAD(0x03F0, 0x0180, 2, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_MISO__CSI_DATA8                          = IOMUX_PAD(0x03F0, 0x0180, 3, 0x0510, 1, 0),
+	MX7D_PAD_ECSPI2_MISO__LCD_DATA15                         = IOMUX_PAD(0x03F0, 0x0180, 4, 0x0674, 2, 0),
+
+	MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0                          = IOMUX_PAD(0x03F4, 0x0184, 0, 0x0540, 0, 0),
+	MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS                       = IOMUX_PAD(0x03F4, 0x0184, 1, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS                       = IOMUX_PAD(0x03F4, 0x0184, 1, 0x0720, 3, 0),
+	MX7D_PAD_ECSPI2_SS0__SD1_DATA7                           = IOMUX_PAD(0x03F4, 0x0184, 2, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_SS0__CSI_DATA9                           = IOMUX_PAD(0x03F4, 0x0184, 3, 0x0514, 1, 0),
+	MX7D_PAD_ECSPI2_SS0__LCD_RESET                           = IOMUX_PAD(0x03F4, 0x0184, 4, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_SS0__GPIO4_IO23                          = IOMUX_PAD(0x03F4, 0x0184, 5, 0x0000, 0, 0),
+	MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE                       = IOMUX_PAD(0x03F4, 0x0184, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_SD1_CD_B__SD1_CD_B                              = IOMUX_PAD(0x03F8, 0x0188, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_CD_B__UART6_DCE_RX                          = IOMUX_PAD(0x03F8, 0x0188, 2, 0x071C, 4, 0),
+	MX7D_PAD_SD1_CD_B__UART6_DTE_TX                          = IOMUX_PAD(0x03F8, 0x0188, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD1_CD_B__ECSPI4_MISO                           = IOMUX_PAD(0x03F8, 0x0188, 3, 0x0558, 1, 0),
+	MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0                        = IOMUX_PAD(0x03F8, 0x0188, 4, 0x0584, 1, 0),
+	MX7D_PAD_SD1_CD_B__GPIO5_IO0                             = IOMUX_PAD(0x03F8, 0x0188, 5, 0x0000, 0, 0),
+	MX7D_PAD_SD1_CD_B__CCM_CLKO1                             = IOMUX_PAD(0x03F8, 0x0188, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_SD1_WP__SD1_WP                                  = IOMUX_PAD(0x03FC, 0x018C, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_WP__UART6_DCE_TX                            = IOMUX_PAD(0x03FC, 0x018C, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD1_WP__UART6_DTE_RX                            = IOMUX_PAD(0x03FC, 0x018C, 2, 0x071C, 5, 0),
+	MX7D_PAD_SD1_WP__ECSPI4_MOSI                             = IOMUX_PAD(0x03FC, 0x018C, 3, 0x055C, 1, 0),
+	MX7D_PAD_SD1_WP__FLEXTIMER1_CH1                          = IOMUX_PAD(0x03FC, 0x018C, 4, 0x0588, 1, 0),
+	MX7D_PAD_SD1_WP__GPIO5_IO1                               = IOMUX_PAD(0x03FC, 0x018C, 5, 0x0000, 0, 0),
+	MX7D_PAD_SD1_WP__CCM_CLKO2                               = IOMUX_PAD(0x03FC, 0x018C, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_SD1_RESET_B__SD1_RESET_B                        = IOMUX_PAD(0x0400, 0x0190, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_RESET_B__SAI3_MCLK                          = IOMUX_PAD(0x0400, 0x0190, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS                      = IOMUX_PAD(0x0400, 0x0190, 2, 0x0718, 4, 0),
+	MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS                      = IOMUX_PAD(0x0400, 0x0190, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK                        = IOMUX_PAD(0x0400, 0x0190, 3, 0x0554, 1, 0),
+	MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2                     = IOMUX_PAD(0x0400, 0x0190, 4, 0x058C, 1, 0),
+	MX7D_PAD_SD1_RESET_B__GPIO5_IO2                          = IOMUX_PAD(0x0400, 0x0190, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD1_CLK__SD1_CLK                                = IOMUX_PAD(0x0404, 0x0194, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_CLK__SAI3_RX_SYNC                           = IOMUX_PAD(0x0404, 0x0194, 1, 0x06CC, 1, 0),
+	MX7D_PAD_SD1_CLK__UART6_DCE_CTS                          = IOMUX_PAD(0x0404, 0x0194, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD1_CLK__UART6_DTE_RTS                          = IOMUX_PAD(0x0404, 0x0194, 2, 0x0718, 5, 0),
+	MX7D_PAD_SD1_CLK__ECSPI4_SS0                             = IOMUX_PAD(0x0404, 0x0194, 3, 0x0560, 1, 0),
+	MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3                         = IOMUX_PAD(0x0404, 0x0194, 4, 0x0590, 1, 0),
+	MX7D_PAD_SD1_CLK__GPIO5_IO3                              = IOMUX_PAD(0x0404, 0x0194, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD1_CMD__SD1_CMD                                = IOMUX_PAD(0x0408, 0x0198, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_CMD__SAI3_RX_BCLK                           = IOMUX_PAD(0x0408, 0x0198, 1, 0x06C4, 1, 0),
+	MX7D_PAD_SD1_CMD__ECSPI4_SS1                             = IOMUX_PAD(0x0408, 0x0198, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0                         = IOMUX_PAD(0x0408, 0x0198, 4, 0x05AC, 1, 0),
+	MX7D_PAD_SD1_CMD__GPIO5_IO4                              = IOMUX_PAD(0x0408, 0x0198, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD1_DATA0__SD1_DATA0                            = IOMUX_PAD(0x040C, 0x019C, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0                        = IOMUX_PAD(0x040C, 0x019C, 1, 0x06C8, 1, 0),
+	MX7D_PAD_SD1_DATA0__UART7_DCE_RX                         = IOMUX_PAD(0x040C, 0x019C, 2, 0x0724, 4, 0),
+	MX7D_PAD_SD1_DATA0__UART7_DTE_TX                         = IOMUX_PAD(0x040C, 0x019C, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA0__ECSPI4_SS2                           = IOMUX_PAD(0x040C, 0x019C, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1                       = IOMUX_PAD(0x040C, 0x019C, 4, 0x05B0, 1, 0),
+	MX7D_PAD_SD1_DATA0__GPIO5_IO5                            = IOMUX_PAD(0x040C, 0x019C, 5, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1                         = IOMUX_PAD(0x040C, 0x019C, 6, 0x04E4, 1, 0),
+
+	MX7D_PAD_SD1_DATA1__SD1_DATA1                            = IOMUX_PAD(0x0410, 0x01A0, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK                         = IOMUX_PAD(0x0410, 0x01A0, 1, 0x06D0, 1, 0),
+	MX7D_PAD_SD1_DATA1__UART7_DCE_TX                         = IOMUX_PAD(0x0410, 0x01A0, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA1__UART7_DTE_RX                         = IOMUX_PAD(0x0410, 0x01A0, 2, 0x0724, 5, 0),
+	MX7D_PAD_SD1_DATA1__ECSPI4_SS3                           = IOMUX_PAD(0x0410, 0x01A0, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2                       = IOMUX_PAD(0x0410, 0x01A0, 4, 0x05B4, 1, 0),
+	MX7D_PAD_SD1_DATA1__GPIO5_IO6                            = IOMUX_PAD(0x0410, 0x01A0, 5, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2                         = IOMUX_PAD(0x0410, 0x01A0, 6, 0x04E8, 1, 0),
+
+	MX7D_PAD_SD1_DATA2__SD1_DATA2                            = IOMUX_PAD(0x0414, 0x01A4, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC                         = IOMUX_PAD(0x0414, 0x01A4, 1, 0x06D4, 1, 0),
+	MX7D_PAD_SD1_DATA2__UART7_DCE_CTS                        = IOMUX_PAD(0x0414, 0x01A4, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA2__UART7_DTE_RTS                        = IOMUX_PAD(0x0414, 0x01A4, 2, 0x0720, 4, 0),
+	MX7D_PAD_SD1_DATA2__ECSPI4_RDY                           = IOMUX_PAD(0x0414, 0x01A4, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3                       = IOMUX_PAD(0x0414, 0x01A4, 4, 0x05B8, 1, 0),
+	MX7D_PAD_SD1_DATA2__GPIO5_IO7                            = IOMUX_PAD(0x0414, 0x01A4, 5, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3                         = IOMUX_PAD(0x0414, 0x01A4, 6, 0x04EC, 1, 0),
+
+	MX7D_PAD_SD1_DATA3__SD1_DATA3                            = IOMUX_PAD(0x0418, 0x01A8, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0                        = IOMUX_PAD(0x0418, 0x01A8, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA3__UART7_DCE_RTS                        = IOMUX_PAD(0x0418, 0x01A8, 2, 0x0720, 5, 0),
+	MX7D_PAD_SD1_DATA3__UART7_DTE_CTS                        = IOMUX_PAD(0x0418, 0x01A8, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA3__ECSPI3_SS1                           = IOMUX_PAD(0x0418, 0x01A8, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA                       = IOMUX_PAD(0x0418, 0x01A8, 4, 0x05A4, 1, 0),
+	MX7D_PAD_SD1_DATA3__GPIO5_IO8                            = IOMUX_PAD(0x0418, 0x01A8, 5, 0x0000, 0, 0),
+	MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4                         = IOMUX_PAD(0x0418, 0x01A8, 6, 0x04F0, 1, 0),
+
+	MX7D_PAD_SD2_CD_B__SD2_CD_B                              = IOMUX_PAD(0x041C, 0x01AC, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CD_B__ENET1_MDIO                            = IOMUX_PAD(0x041C, 0x01AC, 1, 0x0568, 2, 0),
+	MX7D_PAD_SD2_CD_B__ENET2_MDIO                            = IOMUX_PAD(0x041C, 0x01AC, 2, 0x0574, 2, 0),
+	MX7D_PAD_SD2_CD_B__ECSPI3_SS2                            = IOMUX_PAD(0x041C, 0x01AC, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB                        = IOMUX_PAD(0x041C, 0x01AC, 4, 0x05A8, 1, 0),
+	MX7D_PAD_SD2_CD_B__GPIO5_IO9                             = IOMUX_PAD(0x041C, 0x01AC, 5, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0                       = IOMUX_PAD(0x041C, 0x01AC, 6, 0x06D8, 2, 0),
+
+	MX7D_PAD_SD2_WP__SD2_WP                                  = IOMUX_PAD(0x0420, 0x01B0, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_WP__ENET1_MDC                               = IOMUX_PAD(0x0420, 0x01B0, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD2_WP__ENET2_MDC                               = IOMUX_PAD(0x0420, 0x01B0, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD2_WP__ECSPI3_SS3                              = IOMUX_PAD(0x0420, 0x01B0, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_WP__USB_OTG1_ID                             = IOMUX_PAD(0x0420, 0x01B0, 4, 0x0734, 2, 0),
+	MX7D_PAD_SD2_WP__GPIO5_IO10                              = IOMUX_PAD(0x0420, 0x01B0, 5, 0x0000, 0, 0),
+	MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1                         = IOMUX_PAD(0x0420, 0x01B0, 6, 0x06DC, 2, 0),
+
+	MX7D_PAD_SD2_RESET_B__SD2_RESET_B                        = IOMUX_PAD(0x0424, 0x01B4, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_RESET_B__SAI2_MCLK                          = IOMUX_PAD(0x0424, 0x01B4, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD2_RESET_B__SD2_RESET                          = IOMUX_PAD(0x0424, 0x01B4, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD2_RESET_B__ECSPI3_RDY                         = IOMUX_PAD(0x0424, 0x01B4, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_RESET_B__USB_OTG2_ID                        = IOMUX_PAD(0x0424, 0x01B4, 4, 0x0730, 2, 0),
+	MX7D_PAD_SD2_RESET_B__GPIO5_IO11                         = IOMUX_PAD(0x0424, 0x01B4, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD2_CLK__SD2_CLK                                = IOMUX_PAD(0x0428, 0x01B8, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CLK__SAI2_RX_SYNC                           = IOMUX_PAD(0x0428, 0x01B8, 1, 0x06B8, 0, 0),
+	MX7D_PAD_SD2_CLK__MQS_RIGHT                              = IOMUX_PAD(0x0428, 0x01B8, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CLK__GPT4_CLK                               = IOMUX_PAD(0x0428, 0x01B8, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CLK__GPIO5_IO12                             = IOMUX_PAD(0x0428, 0x01B8, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD2_CMD__SD2_CMD                                = IOMUX_PAD(0x042C, 0x01BC, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CMD__SAI2_RX_BCLK                           = IOMUX_PAD(0x042C, 0x01BC, 1, 0x06B0, 0, 0),
+	MX7D_PAD_SD2_CMD__MQS_LEFT                               = IOMUX_PAD(0x042C, 0x01BC, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CMD__GPT4_CAPTURE1                          = IOMUX_PAD(0x042C, 0x01BC, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD                        = IOMUX_PAD(0x042C, 0x01BC, 4, 0x06EC, 1, 0),
+	MX7D_PAD_SD2_CMD__GPIO5_IO13                             = IOMUX_PAD(0x042C, 0x01BC, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD2_DATA0__SD2_DATA0                            = IOMUX_PAD(0x0430, 0x01C0, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0                        = IOMUX_PAD(0x0430, 0x01C0, 1, 0x06B4, 0, 0),
+	MX7D_PAD_SD2_DATA0__UART4_DCE_RX                         = IOMUX_PAD(0x0430, 0x01C0, 2, 0x070C, 2, 0),
+	MX7D_PAD_SD2_DATA0__UART4_DTE_TX                         = IOMUX_PAD(0x0430, 0x01C0, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2                        = IOMUX_PAD(0x0430, 0x01C0, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK                       = IOMUX_PAD(0x0430, 0x01C0, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA0__GPIO5_IO14                           = IOMUX_PAD(0x0430, 0x01C0, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD2_DATA1__SD2_DATA1                            = IOMUX_PAD(0x0434, 0x01C4, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK                         = IOMUX_PAD(0x0434, 0x01C4, 1, 0x06BC, 0, 0),
+	MX7D_PAD_SD2_DATA1__UART4_DCE_TX                         = IOMUX_PAD(0x0434, 0x01C4, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA1__UART4_DTE_RX                         = IOMUX_PAD(0x0434, 0x01C4, 2, 0x070C, 3, 0),
+	MX7D_PAD_SD2_DATA1__GPT4_COMPARE1                        = IOMUX_PAD(0x0434, 0x01C4, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B                     = IOMUX_PAD(0x0434, 0x01C4, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA1__GPIO5_IO15                           = IOMUX_PAD(0x0434, 0x01C4, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD2_DATA2__SD2_DATA2                            = IOMUX_PAD(0x0438, 0x01C8, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC                         = IOMUX_PAD(0x0438, 0x01C8, 1, 0x06C0, 0, 0),
+	MX7D_PAD_SD2_DATA2__UART4_DCE_CTS                        = IOMUX_PAD(0x0438, 0x01C8, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA2__UART4_DTE_RTS                        = IOMUX_PAD(0x0438, 0x01C8, 2, 0x0708, 2, 0),
+	MX7D_PAD_SD2_DATA2__GPT4_COMPARE2                        = IOMUX_PAD(0x0438, 0x01C8, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN                      = IOMUX_PAD(0x0438, 0x01C8, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA2__GPIO5_IO16                           = IOMUX_PAD(0x0438, 0x01C8, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD2_DATA3__SD2_DATA3                            = IOMUX_PAD(0x043C, 0x01CC, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0                        = IOMUX_PAD(0x043C, 0x01CC, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA3__UART4_DCE_RTS                        = IOMUX_PAD(0x043C, 0x01CC, 2, 0x0708, 3, 0),
+	MX7D_PAD_SD2_DATA3__UART4_DTE_CTS                        = IOMUX_PAD(0x043C, 0x01CC, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA3__GPT4_COMPARE3                        = IOMUX_PAD(0x043C, 0x01CC, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD                        = IOMUX_PAD(0x043C, 0x01CC, 4, 0x06E8, 1, 0),
+	MX7D_PAD_SD2_DATA3__GPIO5_IO17                           = IOMUX_PAD(0x043C, 0x01CC, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_CLK__SD3_CLK                                = IOMUX_PAD(0x0440, 0x01D0, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_CLK__NAND_CLE                               = IOMUX_PAD(0x0440, 0x01D0, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_CLK__ECSPI4_MISO                            = IOMUX_PAD(0x0440, 0x01D0, 2, 0x0558, 2, 0),
+	MX7D_PAD_SD3_CLK__SAI3_RX_SYNC                           = IOMUX_PAD(0x0440, 0x01D0, 3, 0x06CC, 2, 0),
+	MX7D_PAD_SD3_CLK__GPT3_CLK                               = IOMUX_PAD(0x0440, 0x01D0, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD3_CLK__GPIO6_IO0                              = IOMUX_PAD(0x0440, 0x01D0, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_CMD__SD3_CMD                                = IOMUX_PAD(0x0444, 0x01D4, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_CMD__NAND_ALE                               = IOMUX_PAD(0x0444, 0x01D4, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_CMD__ECSPI4_MOSI                            = IOMUX_PAD(0x0444, 0x01D4, 2, 0x055C, 2, 0),
+	MX7D_PAD_SD3_CMD__SAI3_RX_BCLK                           = IOMUX_PAD(0x0444, 0x01D4, 3, 0x06C4, 2, 0),
+	MX7D_PAD_SD3_CMD__GPT3_CAPTURE1                          = IOMUX_PAD(0x0444, 0x01D4, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD3_CMD__GPIO6_IO1                              = IOMUX_PAD(0x0444, 0x01D4, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_DATA0__SD3_DATA0                            = IOMUX_PAD(0x0448, 0x01D8, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA0__NAND_DATA00                          = IOMUX_PAD(0x0448, 0x01D8, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA0__ECSPI4_SS0                           = IOMUX_PAD(0x0448, 0x01D8, 2, 0x0560, 2, 0),
+	MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0                        = IOMUX_PAD(0x0448, 0x01D8, 3, 0x06C8, 2, 0),
+	MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2                        = IOMUX_PAD(0x0448, 0x01D8, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA0__GPIO6_IO2                            = IOMUX_PAD(0x0448, 0x01D8, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_DATA1__SD3_DATA1                            = IOMUX_PAD(0x044C, 0x01DC, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA1__NAND_DATA01                          = IOMUX_PAD(0x044C, 0x01DC, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA1__ECSPI4_SCLK                          = IOMUX_PAD(0x044C, 0x01DC, 2, 0x0554, 2, 0),
+	MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK                         = IOMUX_PAD(0x044C, 0x01DC, 3, 0x06D0, 2, 0),
+	MX7D_PAD_SD3_DATA1__GPT3_COMPARE1                        = IOMUX_PAD(0x044C, 0x01DC, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA1__GPIO6_IO3                            = IOMUX_PAD(0x044C, 0x01DC, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_DATA2__SD3_DATA2                            = IOMUX_PAD(0x0450, 0x01E0, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA2__NAND_DATA02                          = IOMUX_PAD(0x0450, 0x01E0, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA2__I2C3_SDA                             = IOMUX_PAD(0x0450, 0x01E0, IOMUX_CONFIG_SION | 2, 0x05E8, 3, 0),
+	MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC                         = IOMUX_PAD(0x0450, 0x01E0, 3, 0x06D4, 2, 0),
+	MX7D_PAD_SD3_DATA2__GPT3_COMPARE2                        = IOMUX_PAD(0x0450, 0x01E0, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA2__GPIO6_IO4                            = IOMUX_PAD(0x0450, 0x01E0, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_DATA3__SD3_DATA3                            = IOMUX_PAD(0x0454, 0x01E4, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA3__NAND_DATA03                          = IOMUX_PAD(0x0454, 0x01E4, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA3__I2C3_SCL                             = IOMUX_PAD(0x0454, 0x01E4, IOMUX_CONFIG_SION | 2, 0x05E4, 3, 0),
+	MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0                        = IOMUX_PAD(0x0454, 0x01E4, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA3__GPT3_COMPARE3                        = IOMUX_PAD(0x0454, 0x01E4, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA3__GPIO6_IO5                            = IOMUX_PAD(0x0454, 0x01E4, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_DATA4__SD3_DATA4                            = IOMUX_PAD(0x0458, 0x01E8, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA4__NAND_DATA04                          = IOMUX_PAD(0x0458, 0x01E8, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA4__UART3_DCE_RX                         = IOMUX_PAD(0x0458, 0x01E8, 3, 0x0704, 4, 0),
+	MX7D_PAD_SD3_DATA4__UART3_DTE_TX                         = IOMUX_PAD(0x0458, 0x01E8, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA4__FLEXCAN2_RX                          = IOMUX_PAD(0x0458, 0x01E8, 4, 0x04E0, 2, 0),
+	MX7D_PAD_SD3_DATA4__GPIO6_IO6                            = IOMUX_PAD(0x0458, 0x01E8, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_DATA5__SD3_DATA5                            = IOMUX_PAD(0x045C, 0x01EC, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA5__NAND_DATA05                          = IOMUX_PAD(0x045C, 0x01EC, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA5__UART3_DCE_TX                         = IOMUX_PAD(0x045C, 0x01EC, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA5__UART3_DTE_RX                         = IOMUX_PAD(0x045C, 0x01EC, 3, 0x0704, 5, 0),
+	MX7D_PAD_SD3_DATA5__FLEXCAN1_TX                          = IOMUX_PAD(0x045C, 0x01EC, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA5__GPIO6_IO7                            = IOMUX_PAD(0x045C, 0x01EC, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_DATA6__SD3_DATA6                            = IOMUX_PAD(0x0460, 0x01F0, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA6__NAND_DATA06                          = IOMUX_PAD(0x0460, 0x01F0, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA6__SD3_WP                               = IOMUX_PAD(0x0460, 0x01F0, 2, 0x073C, 2, 0),
+	MX7D_PAD_SD3_DATA6__UART3_DCE_RTS                        = IOMUX_PAD(0x0460, 0x01F0, 3, 0x0700, 4, 0),
+	MX7D_PAD_SD3_DATA6__UART3_DTE_CTS                        = IOMUX_PAD(0x0460, 0x01F0, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA6__FLEXCAN2_TX                          = IOMUX_PAD(0x0460, 0x01F0, 4, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA6__GPIO6_IO8                            = IOMUX_PAD(0x0460, 0x01F0, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_DATA7__SD3_DATA7                            = IOMUX_PAD(0x0464, 0x01F4, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA7__NAND_DATA07                          = IOMUX_PAD(0x0464, 0x01F4, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA7__SD3_CD_B                             = IOMUX_PAD(0x0464, 0x01F4, 2, 0x0738, 2, 0),
+	MX7D_PAD_SD3_DATA7__UART3_DCE_CTS                        = IOMUX_PAD(0x0464, 0x01F4, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD3_DATA7__UART3_DTE_RTS                        = IOMUX_PAD(0x0464, 0x01F4, 3, 0x0700, 5, 0),
+	MX7D_PAD_SD3_DATA7__FLEXCAN1_RX                          = IOMUX_PAD(0x0464, 0x01F4, 4, 0x04DC, 2, 0),
+	MX7D_PAD_SD3_DATA7__GPIO6_IO9                            = IOMUX_PAD(0x0464, 0x01F4, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_STROBE__SD3_STROBE                          = IOMUX_PAD(0x0468, 0x01F8, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_STROBE__NAND_RE_B                           = IOMUX_PAD(0x0468, 0x01F8, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_STROBE__GPIO6_IO10                          = IOMUX_PAD(0x0468, 0x01F8, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SD3_RESET_B__SD3_RESET_B                        = IOMUX_PAD(0x046C, 0x01FC, 0, 0x0000, 0, 0),
+	MX7D_PAD_SD3_RESET_B__NAND_WE_B                          = IOMUX_PAD(0x046C, 0x01FC, 1, 0x0000, 0, 0),
+	MX7D_PAD_SD3_RESET_B__SD3_RESET                          = IOMUX_PAD(0x046C, 0x01FC, 2, 0x0000, 0, 0),
+	MX7D_PAD_SD3_RESET_B__SAI3_MCLK                          = IOMUX_PAD(0x046C, 0x01FC, 3, 0x0000, 0, 0),
+	MX7D_PAD_SD3_RESET_B__GPIO6_IO11                         = IOMUX_PAD(0x046C, 0x01FC, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0                     = IOMUX_PAD(0x0470, 0x0200, 0, 0x06A0, 0, 0),
+	MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B                        = IOMUX_PAD(0x0470, 0x0200, 1, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX                      = IOMUX_PAD(0x0470, 0x0200, 2, 0x0714, 2, 0),
+	MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX                      = IOMUX_PAD(0x0470, 0x0200, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX                       = IOMUX_PAD(0x0470, 0x0200, 3, 0x04DC, 3, 0),
+	MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD                   = IOMUX_PAD(0x0470, 0x0200, 4, 0x06E4, 1, 0),
+	MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12                        = IOMUX_PAD(0x0470, 0x0200, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET                  = IOMUX_PAD(0x0470, 0x0200, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK                      = IOMUX_PAD(0x0474, 0x0204, 0, 0x06A8, 0, 0),
+	MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B                        = IOMUX_PAD(0x0474, 0x0204, 1, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX                      = IOMUX_PAD(0x0474, 0x0204, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX                      = IOMUX_PAD(0x0474, 0x0204, 2, 0x0714, 3, 0),
+	MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX                       = IOMUX_PAD(0x0474, 0x0204, 3, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK                    = IOMUX_PAD(0x0474, 0x0204, 4, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13                        = IOMUX_PAD(0x0474, 0x0204, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET                   = IOMUX_PAD(0x0474, 0x0204, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC                      = IOMUX_PAD(0x0478, 0x0208, 0, 0x06AC, 0, 0),
+	MX7D_PAD_SAI1_TX_SYNC__NAND_DQS                          = IOMUX_PAD(0x0478, 0x0208, 1, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS                     = IOMUX_PAD(0x0478, 0x0208, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS                     = IOMUX_PAD(0x0478, 0x0208, 2, 0x0710, 2, 0),
+	MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX                       = IOMUX_PAD(0x0478, 0x0208, 3, 0x04E0, 3, 0),
+	MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B                  = IOMUX_PAD(0x0478, 0x0208, 4, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14                        = IOMUX_PAD(0x0478, 0x0208, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT                      = IOMUX_PAD(0x0478, 0x0208, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0                     = IOMUX_PAD(0x047C, 0x020C, 0, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_DATA__NAND_READY_B                      = IOMUX_PAD(0x047C, 0x020C, 1, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS                     = IOMUX_PAD(0x047C, 0x020C, 2, 0x0710, 3, 0),
+	MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS                     = IOMUX_PAD(0x047C, 0x020C, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX                       = IOMUX_PAD(0x047C, 0x020C, 3, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN                   = IOMUX_PAD(0x047C, 0x020C, 4, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15                        = IOMUX_PAD(0x047C, 0x020C, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET                  = IOMUX_PAD(0x047C, 0x020C, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC                      = IOMUX_PAD(0x0480, 0x0210, 0, 0x06A4, 0, 0),
+	MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B                        = IOMUX_PAD(0x0480, 0x0210, 1, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC                      = IOMUX_PAD(0x0480, 0x0210, 2, 0x06B8, 1, 0),
+	MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL                          = IOMUX_PAD(0x0480, 0x0210, IOMUX_CONFIG_SION | 3, 0x05EC, 3, 0),
+	MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD                     = IOMUX_PAD(0x0480, 0x0210, 4, 0x06E0, 1, 0),
+	MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16                        = IOMUX_PAD(0x0480, 0x0210, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT                         = IOMUX_PAD(0x0480, 0x0210, 6, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0                  = IOMUX_PAD(0x0480, 0x0210, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK                      = IOMUX_PAD(0x0484, 0x0214, 0, 0x069C, 0, 0),
+	MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B                        = IOMUX_PAD(0x0484, 0x0214, 1, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK                      = IOMUX_PAD(0x0484, 0x0214, 2, 0x06B0, 1, 0),
+	MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA                          = IOMUX_PAD(0x0484, 0x0214, IOMUX_CONFIG_SION | 3, 0x05F0, 3, 0),
+	MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA                    = IOMUX_PAD(0x0484, 0x0214, 4, 0x05CC, 1, 0),
+	MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17                        = IOMUX_PAD(0x0484, 0x0214, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT                          = IOMUX_PAD(0x0484, 0x0214, 6, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1                  = IOMUX_PAD(0x0484, 0x0214, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI1_MCLK__SAI1_MCLK                            = IOMUX_PAD(0x0488, 0x0218, 0, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_MCLK__NAND_WP_B                            = IOMUX_PAD(0x0488, 0x0218, 1, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_MCLK__SAI2_MCLK                            = IOMUX_PAD(0x0488, 0x0218, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY                       = IOMUX_PAD(0x0488, 0x0218, 3, 0x04F4, 3, 0),
+	MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB                       = IOMUX_PAD(0x0488, 0x0218, 4, 0x05D0, 1, 0),
+	MX7D_PAD_SAI1_MCLK__GPIO6_IO18                           = IOMUX_PAD(0x0488, 0x0218, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK                       = IOMUX_PAD(0x0488, 0x0218, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC                      = IOMUX_PAD(0x048C, 0x021C, 0, 0x06C0, 1, 0),
+	MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO                       = IOMUX_PAD(0x048C, 0x021C, 1, 0x0548, 1, 0),
+	MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX                      = IOMUX_PAD(0x048C, 0x021C, 2, 0x070C, 4, 0),
+	MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX                      = IOMUX_PAD(0x048C, 0x021C, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS                     = IOMUX_PAD(0x048C, 0x021C, 3, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS                     = IOMUX_PAD(0x048C, 0x021C, 3, 0x06F0, 0, 0),
+	MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4                    = IOMUX_PAD(0x048C, 0x021C, 4, 0x05BC, 1, 0),
+	MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19                        = IOMUX_PAD(0x048C, 0x021C, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK                      = IOMUX_PAD(0x0490, 0x0220, 0, 0x06BC, 1, 0),
+	MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI                       = IOMUX_PAD(0x0490, 0x0220, 1, 0x054C, 1, 0),
+	MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX                      = IOMUX_PAD(0x0490, 0x0220, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX                      = IOMUX_PAD(0x0490, 0x0220, 2, 0x070C, 5, 0),
+	MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS                     = IOMUX_PAD(0x0490, 0x0220, 3, 0x06F0, 1, 0),
+	MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS                     = IOMUX_PAD(0x0490, 0x0220, 3, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5                    = IOMUX_PAD(0x0490, 0x0220, 4, 0x05C0, 1, 0),
+	MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20                        = IOMUX_PAD(0x0490, 0x0220, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0                     = IOMUX_PAD(0x0494, 0x0224, 0, 0x06B4, 1, 0),
+	MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK                       = IOMUX_PAD(0x0494, 0x0224, 1, 0x0544, 1, 0),
+	MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS                     = IOMUX_PAD(0x0494, 0x0224, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS                     = IOMUX_PAD(0x0494, 0x0224, 2, 0x0708, 4, 0),
+	MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS                     = IOMUX_PAD(0x0494, 0x0224, 3, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS                     = IOMUX_PAD(0x0494, 0x0224, 3, 0x06F8, 2, 0),
+	MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6                    = IOMUX_PAD(0x0494, 0x0224, 4, 0x05C4, 1, 0),
+	MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21                        = IOMUX_PAD(0x0494, 0x0224, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_RX_DATA__KPP_COL7                          = IOMUX_PAD(0x0494, 0x0224, 6, 0x0610, 1, 0),
+
+	MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0                     = IOMUX_PAD(0x0498, 0x0228, 0, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0                        = IOMUX_PAD(0x0498, 0x0228, 1, 0x0550, 1, 0),
+	MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS                     = IOMUX_PAD(0x0498, 0x0228, 2, 0x0708, 5, 0),
+	MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS                     = IOMUX_PAD(0x0498, 0x0228, 2, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS                     = IOMUX_PAD(0x0498, 0x0228, 3, 0x06F8, 3, 0),
+	MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS                     = IOMUX_PAD(0x0498, 0x0228, 3, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7                    = IOMUX_PAD(0x0498, 0x0228, 4, 0x05C8, 1, 0),
+	MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22                        = IOMUX_PAD(0x0498, 0x0228, 5, 0x0000, 0, 0),
+	MX7D_PAD_SAI2_TX_DATA__KPP_ROW7                          = IOMUX_PAD(0x0498, 0x0228, 6, 0x0630, 1, 0),
+
+	MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0                = IOMUX_PAD(0x049C, 0x022C, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT                       = IOMUX_PAD(0x049C, 0x022C, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL                       = IOMUX_PAD(0x049C, 0x022C, IOMUX_CONFIG_SION | 2, 0x05E4, 4, 0),
+	MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS                  = IOMUX_PAD(0x049C, 0x022C, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS                  = IOMUX_PAD(0x049C, 0x022C, 3, 0x06F0, 2, 0),
+	MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0                     = IOMUX_PAD(0x049C, 0x022C, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0                      = IOMUX_PAD(0x049C, 0x022C, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3                       = IOMUX_PAD(0x049C, 0x022C, 6, 0x0620, 1, 0),
+
+	MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1                = IOMUX_PAD(0x04A0, 0x0230, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT                       = IOMUX_PAD(0x04A0, 0x0230, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA                       = IOMUX_PAD(0x04A0, 0x0230, IOMUX_CONFIG_SION | 2, 0x05E8, 4, 0),
+	MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS                  = IOMUX_PAD(0x04A0, 0x0230, 3, 0x06F0, 3, 0),
+	MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS                  = IOMUX_PAD(0x04A0, 0x0230, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1                     = IOMUX_PAD(0x04A0, 0x0230, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1                      = IOMUX_PAD(0x04A0, 0x0230, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3                       = IOMUX_PAD(0x04A0, 0x0230, 6, 0x0600, 1, 0),
+
+	MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2                = IOMUX_PAD(0x04A4, 0x0234, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX                    = IOMUX_PAD(0x04A4, 0x0234, 1, 0x04DC, 4, 0),
+	MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK                    = IOMUX_PAD(0x04A4, 0x0234, 2, 0x0534, 1, 0),
+	MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX                   = IOMUX_PAD(0x04A4, 0x0234, 3, 0x06F4, 2, 0),
+	MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX                   = IOMUX_PAD(0x04A4, 0x0234, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4                     = IOMUX_PAD(0x04A4, 0x0234, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2                      = IOMUX_PAD(0x04A4, 0x0234, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2                       = IOMUX_PAD(0x04A4, 0x0234, 6, 0x061C, 1, 0),
+
+	MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3                = IOMUX_PAD(0x04A8, 0x0238, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX                    = IOMUX_PAD(0x04A8, 0x0238, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI                    = IOMUX_PAD(0x04A8, 0x0238, 2, 0x053C, 1, 0),
+	MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX                   = IOMUX_PAD(0x04A8, 0x0238, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX                   = IOMUX_PAD(0x04A8, 0x0238, 3, 0x06F4, 3, 0),
+	MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5                     = IOMUX_PAD(0x04A8, 0x0238, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3                      = IOMUX_PAD(0x04A8, 0x0238, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2                       = IOMUX_PAD(0x04A8, 0x0238, 6, 0x05FC, 1, 0),
+
+	MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL          = IOMUX_PAD(0x04AC, 0x023C, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1                  = IOMUX_PAD(0x04AC, 0x023C, 2, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6                  = IOMUX_PAD(0x04AC, 0x023C, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4                   = IOMUX_PAD(0x04AC, 0x023C, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1                    = IOMUX_PAD(0x04AC, 0x023C, 6, 0x0618, 1, 0),
+
+	MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC                = IOMUX_PAD(0x04B0, 0x0240, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER                    = IOMUX_PAD(0x04B0, 0x0240, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2                     = IOMUX_PAD(0x04B0, 0x0240, 2, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7                     = IOMUX_PAD(0x04B0, 0x0240, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5                      = IOMUX_PAD(0x04B0, 0x0240, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1                       = IOMUX_PAD(0x04B0, 0x0240, 6, 0x0000, 0, 0),
+
+	MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0                = IOMUX_PAD(0x04B4, 0x0244, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT                       = IOMUX_PAD(0x04B4, 0x0244, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3                     = IOMUX_PAD(0x04B4, 0x0244, 2, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8                     = IOMUX_PAD(0x04B4, 0x0244, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6                      = IOMUX_PAD(0x04B4, 0x0244, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0                       = IOMUX_PAD(0x04B4, 0x0244, 6, 0x0614, 1, 0),
+
+	MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1                = IOMUX_PAD(0x04B8, 0x0248, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT                       = IOMUX_PAD(0x04B8, 0x0248, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY                     = IOMUX_PAD(0x04B8, 0x0248, 2, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9                     = IOMUX_PAD(0x04B8, 0x0248, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7                      = IOMUX_PAD(0x04B8, 0x0248, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0                       = IOMUX_PAD(0x04B8, 0x0248, 6, 0x05F4, 1, 0),
+
+	MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2                = IOMUX_PAD(0x04BC, 0x024C, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX                    = IOMUX_PAD(0x04BC, 0x024C, 1, 0x04E0, 4, 0),
+	MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO                    = IOMUX_PAD(0x04BC, 0x024C, 2, 0x0538, 1, 0),
+	MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL                       = IOMUX_PAD(0x04BC, 0x024C, IOMUX_CONFIG_SION | 3, 0x05EC, 4, 0),
+	MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED                     = IOMUX_PAD(0x04BC, 0x024C, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8                      = IOMUX_PAD(0x04BC, 0x024C, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3                = IOMUX_PAD(0x04C0, 0x0250, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX                    = IOMUX_PAD(0x04C0, 0x0250, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0                     = IOMUX_PAD(0x04C0, 0x0250, 2, 0x0540, 1, 0),
+	MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA                       = IOMUX_PAD(0x04C0, 0x0250, IOMUX_CONFIG_SION | 3, 0x05F0, 4, 0),
+	MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ                     = IOMUX_PAD(0x04C0, 0x0250, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9                      = IOMUX_PAD(0x04C0, 0x0250, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS               = IOMUX_PAD(0x04C0, 0x0250, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL          = IOMUX_PAD(0x04C4, 0x0254, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC                = IOMUX_PAD(0x04C4, 0x0254, 2, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1               = IOMUX_PAD(0x04C4, 0x0254, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2              = IOMUX_PAD(0x04C4, 0x0254, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10                  = IOMUX_PAD(0x04C4, 0x0254, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC                = IOMUX_PAD(0x04C8, 0x0258, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER                    = IOMUX_PAD(0x04C8, 0x0258, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK                   = IOMUX_PAD(0x04C8, 0x0258, 2, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2                  = IOMUX_PAD(0x04C8, 0x0258, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3                 = IOMUX_PAD(0x04C8, 0x0258, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11                     = IOMUX_PAD(0x04C8, 0x0258, 5, 0x0000, 0, 0),
+
+	MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      = IOMUX_PAD(0x04CC, 0x025C, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1                 = IOMUX_PAD(0x04CC, 0x025C, 1, 0x0564, 2, 0),
+	MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0                     = IOMUX_PAD(0x04CC, 0x025C, 2, 0x06A0, 1, 0),
+	MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3                     = IOMUX_PAD(0x04CC, 0x025C, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ                      = IOMUX_PAD(0x04CC, 0x025C, 4, 0x057C, 1, 0),
+	MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12                        = IOMUX_PAD(0x04CC, 0x025C, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1                      = IOMUX_PAD(0x04CC, 0x025C, 6, 0x04E4, 2, 0),
+	MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0                    = IOMUX_PAD(0x04CC, 0x025C, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      = IOMUX_PAD(0x04D0, 0x0260, 0, 0x056C, 0, 0),
+	MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B                      = IOMUX_PAD(0x04D0, 0x0260, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK                      = IOMUX_PAD(0x04D0, 0x0260, 2, 0x06A8, 1, 0),
+	MX7D_PAD_ENET1_RX_CLK__GPT2_CLK                          = IOMUX_PAD(0x04D0, 0x0260, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE                     = IOMUX_PAD(0x04D0, 0x0260, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13                        = IOMUX_PAD(0x04D0, 0x0260, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2                      = IOMUX_PAD(0x04D0, 0x0260, 6, 0x04E8, 2, 0),
+	MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1                    = IOMUX_PAD(0x04D0, 0x0260, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_ENET1_CRS__ENET1_CRS                            = IOMUX_PAD(0x04D4, 0x0264, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB                 = IOMUX_PAD(0x04D4, 0x0264, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC                         = IOMUX_PAD(0x04D4, 0x0264, 2, 0x06AC, 1, 0),
+	MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1                        = IOMUX_PAD(0x04D4, 0x0264, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0                       = IOMUX_PAD(0x04D4, 0x0264, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_CRS__GPIO7_IO14                           = IOMUX_PAD(0x04D4, 0x0264, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3                         = IOMUX_PAD(0x04D4, 0x0264, 6, 0x04EC, 2, 0),
+	MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2                       = IOMUX_PAD(0x04D4, 0x0264, 7, 0x0000, 0, 0),
+
+	MX7D_PAD_ENET1_COL__ENET1_COL                            = IOMUX_PAD(0x04D8, 0x0268, 0, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY                       = IOMUX_PAD(0x04D8, 0x0268, 1, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_COL__SAI1_TX_DATA0                        = IOMUX_PAD(0x04D8, 0x0268, 2, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_COL__GPT2_CAPTURE2                        = IOMUX_PAD(0x04D8, 0x0268, 3, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1                       = IOMUX_PAD(0x04D8, 0x0268, 4, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_COL__GPIO7_IO15                           = IOMUX_PAD(0x04D8, 0x0268, 5, 0x0000, 0, 0),
+	MX7D_PAD_ENET1_COL__CCM_EXT_CLK4                         = IOMUX_PAD(0x04D8, 0x0268, 6, 0x04F0, 2, 0),
+	MX7D_PAD_ENET1_COL__CSU_INT_DEB                          = IOMUX_PAD(0x04D8, 0x0268, 7, 0x0000, 0, 0),
+};
+#endif  /* __ASM_ARCH_IMX7D_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7d_rdc.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7d_rdc.h
new file mode 100644
index 000000000..2ea175ceb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/mx7d_rdc.h
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MX7D_RDC_H__
+#define __MX7D_RDC_H__
+
+#define RDC_SEMA_PROC_ID 2  /* The processor ID for main CPU */
+
+enum {
+	RDC_PER_GPIO1 = 0,
+	RDC_PER_GPIO2,
+	RDC_PER_GPIO3,
+	RDC_PER_GPIO4,
+	RDC_PER_GPIO5,
+	RDC_PER_GPIO6,
+	RDC_PER_GPIO7,
+	RDC_PER_IOMUXC_LPSR_GPR,
+	RDC_PER_WDOG1,
+	RDC_PER_WDOG2,
+	RDC_PER_WDOG3,
+	RDC_PER_WDOG4,
+	RDC_PER_IOMUXC_LPSR,
+	RDC_PER_GPT1,
+	RDC_PER_GPT2,
+	RDC_PER_GPT3,
+	RDC_PER_GPT4,
+	RDC_PER_ROMCP,
+	RDC_PER_KPP,
+	RDC_PER_IOMUXC,
+	RDC_PER_IOMUXCGPR,
+	RDC_PER_OCOTP,
+	RDC_PER_ANATOP_DIG,
+	RDC_PER_SNVS_HP,
+	RDC_PER_CCM,
+	RDC_PER_SRC,
+	RDC_PER_GPC,
+	RDC_PER_SEMA1,
+	RDC_PER_SEMA2,
+	RDC_PER_RDC,
+	RDC_PER_CSU,
+	RDC_PER_RESERVED1,
+	RDC_PER_RESERVED2,
+	RDC_PER_ADC1,
+	RDC_PER_ADC2,
+	RDC_PER_ECSPI4,
+	RDC_PER_FLEX_TIMER1,
+	RDC_PER_FLEX_TIMER2,
+	RDC_PER_PWM1,
+	RDC_PER_PWM2,
+	RDC_PER_PWM3,
+	RDC_PER_PWM4,
+	RDC_PER_SYSTEM_COUNTER_READ,
+	RDC_PER_SYSTEM_COUNTER_COMPARE,
+	RDC_PER_SYSTEM_COUNTER_CONTROL,
+	RDC_PER_PCIE_PHY,
+	RDC_PER_RESERVED3,
+	RDC_PER_EPDC,
+	RDC_PER_PXP,
+	RDC_PER_CSI,
+	RDC_PER_RESERVED4,
+	RDC_PER_LCDIF,
+	RDC_PER_RESERVED5,
+	RDC_PER_MIPI_CSI,
+	RDC_PER_MIPI_DSI,
+	RDC_PER_RESERVED6,
+	RDC_PER_TZASC,
+	RDC_PER_DDR_PHY,
+	RDC_PER_DDRC,
+	RDC_PER_RESERVED7,
+	RDC_PER_PERFMON1,
+	RDC_PER_PERFMON2,
+	RDC_PER_AXI_DEBUG_MON,
+	RDC_PER_QOSC,
+	RDC_PER_FLEXCAN1,
+	RDC_PER_FLEXCAN2,
+	RDC_PER_I2C1,
+	RDC_PER_I2C2,
+	RDC_PER_I2C3,
+	RDC_PER_I2C4,
+	RDC_PER_UART4,
+	RDC_PER_UART5,
+	RDC_PER_UART6,
+	RDC_PER_UART7,
+	RDC_PER_MU_A,
+	RDC_PER_MU_B,
+	RDC_PER_SEMAPHORE_HS,
+	RDC_PER_USB_PL301,
+	RDC_PER_RESERVED8,
+	RDC_PER_RESERVED9,
+	RDC_PER_RESERVED10,
+	RDC_PER_USB1,
+	RDC_PER_USB2,
+	RDC_PER_USB3,
+	RDC_PER_USDHC1,
+	RDC_PER_USDHC2,
+	RDC_PER_USDHC3,
+	RDC_PER_RESERVED11,
+	RDC_PER_RESERVED12,
+	RDC_PER_SIM1,
+	RDC_PER_SIM2,
+	RDC_PER_QSPI,
+	RDC_PER_WEIM,
+	RDC_PER_SDMA,
+	RDC_PER_ENET1,
+	RDC_PER_ENET2,
+	RDC_PER_RESERVED13,
+	RDC_PER_RESERVED14,
+	RDC_PER_ECSPI1,
+	RDC_PER_ECSPI2,
+	RDC_PER_ECSPI3,
+	RDC_PER_RESERVED15,
+	RDC_PER_UART1,
+	RDC_PER_UART2,
+	RDC_PER_UART3,
+	RDC_PER_RESERVED16,
+	RDC_PER_SAI1,
+	RDC_PER_SAI2,
+	RDC_PER_SAI3,
+	RDC_PER_RESERVED17,
+	RDC_PER_RESERVED18,
+	RDC_PER_SPBA,
+	RDC_PER_DAP,
+	RDC_PER_RESERVED19,
+	RDC_PER_RESERVED20,
+	RDC_PER_RESERVED21,
+	RDC_PER_CAAM,
+	RDC_PER_RESERVED22,
+};
+
+enum {
+	RDC_MA_A7 = 0,
+	RDC_MA_M4,
+	RDC_MA_PCIE,
+	RDC_MA_CSI,
+	RDC_MA_EPDC,
+	RDC_MA_LCDIF,
+	RDC_MA_DISPLAY_PORT,
+	RDC_MA_PXP,
+	RDC_MA_CORESIGHT,
+	RDC_MA_DAP,
+	RDC_MA_CAAM,
+	RDC_MA_SDMA_PERI,
+	RDC_MA_SDMA_BURST,
+	RDC_MA_APBHDMA,
+	RDC_MA_RAWNAND,
+	RDC_MA_USDHC1,
+	RDC_MA_USDHC2,
+	RDC_MA_USDHC3,
+	RDC_MA_NC1,
+	RDC_MA_USB,
+	RDC_MA_NC2,
+	RDC_MA_TEST,
+	RDC_MA_ENET1_TX,
+	RDC_MA_ENET1_RX,
+	RDC_MA_ENET2_TX,
+	RDC_MA_ENET2_RX,
+	RDC_MA_SDMA,
+};
+
+#endif	/* __MX7D_RDC_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-mx7/sys_proto.h
new file mode 100644
index 000000000..e46a02198
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7/sys_proto.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+#ifndef __SYS_PROTO_IMX7_
+#define __SYS_PROTO_IMX7_
+
+#include <asm/mach-imx/sys_proto.h>
+
+void set_wdog_reset(struct wdog_regs *wdog);
+enum boot_device get_boot_device(void);
+
+#endif /* __SYS_PROTO_IMX7_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/clock.h
new file mode 100644
index 000000000..92d4463df
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/clock.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _ASM_ARCH_CLOCK_H
+#define _ASM_ARCH_CLOCK_H
+
+#include <asm/arch/pcc.h>
+#include <asm/arch/scg.h>
+
+/* Mainly for compatible to imx common code. */
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_UART_CLK,
+	MXC_CSPI_CLK,
+	MXC_AXI_CLK,
+	MXC_DDR_CLK,
+	MXC_ESDHC_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_I2C_CLK,
+};
+
+u32 mxc_get_clock(enum mxc_clock clk);
+u32 get_lpuart_clk(void);
+#ifdef CONFIG_SYS_I2C_IMX_LPI2C
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
+u32 imx_get_i2cclk(unsigned i2c_num);
+#endif
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable);
+#endif
+#ifdef CONFIG_USB_EHCI_HCD
+void enable_usboh3_clk(unsigned char enable);
+#endif
+void init_clk_usdhc(u32 index);
+void clock_init(void);
+void hab_caam_clock_enable(unsigned char enable);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/gpio.h
new file mode 100644
index 000000000..7c625609b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/gpio.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_MX7ULP_GPIO_H
+#define __ASM_ARCH_MX7ULP_GPIO_H
+
+struct gpio_regs {
+	u32 gpio_pdor;
+	u32 gpio_psor;
+	u32 gpio_pcor;
+	u32 gpio_ptor;
+	u32 gpio_pdir;
+	u32 gpio_pddr;
+	u32 gpio_gacr;
+};
+
+#define IMX_GPIO_NR(port, index)		((((port)-1)*32)+((index)&31))
+
+#endif /* __ASM_ARCH_MX7ULP_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/imx-regs.h
new file mode 100644
index 000000000..cb0c2c15c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/imx-regs.h
@@ -0,0 +1,1157 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _MX7ULP_REGS_H_
+#define _MX7ULP_REGS_H_
+
+#include <linux/sizes.h>
+
+#define ARCH_MXC
+
+#define ROM_SW_INFO_ADDR        0x000001E8
+
+#define CAAM_SEC_SRAM_BASE      (0x26000000)
+#define CAAM_SEC_SRAM_SIZE      (SZ_32K)
+#define CAAM_SEC_SRAM_END       (CAAM_SEC_SRAM_BASE + CAAM_SEC_SRAM_SIZE - 1)
+
+#define CAAM_ARB_BASE_ADDR      CAAM_SEC_SRAM_BASE
+
+#define OCRAM_0_BASE            (0x2F000000)
+#define OCRAM_0_SIZE            (SZ_128K)
+#define OCRAM_0_END             (OCRAM_0_BASE + OCRAM_0_SIZE - 1)
+
+#define OCRAM_1_BASE            (0x2F020000)
+#define OCRAM_1_SIZE            (SZ_128K)
+#define OCRAM_1_END             (OCRAM_1_BASE + OCRAM_1_SIZE - 1)
+
+#define TCML_BASE               (0x1FFD0000)
+#define TCMU_BASE               (0x20000000)
+
+#define AIPS3_BASE			(0x40800000UL)
+#define AIPS3_SLOT_SIZE			(SZ_64K)
+#define AIPS2_BASE			(0x40000000UL)
+#define AIPS2_SLOT_SIZE			(SZ_64K)
+#define AIPS1_BASE			(0x41080000UL)
+#define AIPS1_SLOT_SIZE			(SZ_4K)
+#define AIPS0_BASE			(0x41000000UL)
+#define AIPS0_SLOT_SIZE			(SZ_4K)
+#define IOMUXC0_AIPS0_SLOT		(61)
+#define WDG0_AIPS0_SLOT			(37)
+#define WDG1_AIPS2_SLOT			(61)
+#define WDG2_AIPS2_SLOT			(67)
+#define WDG0_PCC0_SLOT			(37)
+#define IOMUXC1_AIPS3_SLOT		(44)
+#define CMC0_AIPS1_SLOT			(36)
+#define CMC1_AIPS2_SLOT			(65)
+#define SCG0_AIPS0_SLOT			(39)
+#define PCC0_AIPS0_SLOT			(38)
+#define PCC1_AIPS1_SLOT			(50)
+#define PCC2_AIPS2_SLOT			(63)
+#define PCC3_AIPS3_SLOT			(51)
+#define SCG1_AIPS2_SLOT			(62)
+#define SIM0_AIPS1_SLOT			(35)
+#define SIM1_AIPS1_SLOT			(48)
+#define USBOTG0_AIPS2_SLOT		(51)
+#define USBOTG1_AIPS2_SLOT		(52)
+#define USBPHY_AIPS2_SLOT		(53)
+#define USDHC0_AIPS2_SLOT		(55)
+#define USDHC1_AIPS2_SLOT		(56)
+#define RGPIO2P0_AIPS0_SLOT		(15)
+#define RGPIO2P1_AIPS2_SLOT		(15)
+#define SNVS_AIPS2_SLOT			(35)
+#define IOMUXC0_AIPS0_SLOT		(61)
+#define OCOTP_CTRL_AIPS1_SLOT		(38)
+#define OCOTP_CTRL_PCC1_SLOT		(38)
+#define SIM1_PCC1_SLOT			(48)
+#define MMDC0_AIPS3_SLOT		(43)
+#define IOMUXC_DDR_AIPS3_SLOT		(45)
+
+#define LPI2C0_AIPS0_SLOT		(51)
+#define LPI2C1_AIPS0_SLOT		(52)
+#define LPI2C2_AIPS0_SLOT		(53)
+#define LPI2C3_AIPS0_SLOT		(54)
+#define LPI2C4_AIPS2_SLOT		(43)
+#define LPI2C5_AIPS2_SLOT		(44)
+#define LPI2C6_AIPS3_SLOT		(36)
+#define LPI2C7_AIPS3_SLOT		(37)
+
+#define LPUART0_PCC0_SLOT		(58)
+#define LPUART1_PCC0_SLOT		(59)
+#define LPUART2_PCC1_SLOT		(43)
+#define LPUART3_PCC1_SLOT		(44)
+#define LPUART0_AIPS0_SLOT		(58)
+#define LPUART1_AIPS0_SLOT		(59)
+#define LPUART2_AIPS1_SLOT		(43)
+#define LPUART3_AIPS1_SLOT		(44)
+#define LPUART4_AIPS2_SLOT		(45)
+#define LPUART5_AIPS2_SLOT		(46)
+#define LPUART6_AIPS3_SLOT		(38)
+#define LPUART7_AIPS3_SLOT		(39)
+
+#define CORE_B_ROM_SIZE			(SZ_32K + SZ_64K)
+#define CORE_B_ROM_BASE			(0x00000000)
+
+#define ROMCP_ARB_BASE_ADDR		CORE_B_ROM_BASE
+#define ROMCP_ARB_END_ADDR		CORE_B_ROM_SIZE
+#define IRAM_BASE_ADDR			OCRAM_0_BASE
+#define IRAM_SIZE			(SZ_128K + SZ_128K)
+
+#define IOMUXC_PCR_MUX_ALT0		(0<<8)
+#define IOMUXC_PCR_MUX_ALT1		(1<<8)
+#define IOMUXC_PCR_MUX_ALT2		(2<<8)
+#define IOMUXC_PCR_MUX_ALT3		(3<<8)
+#define IOMUXC_PCR_MUX_ALT4		(4<<8)
+#define IOMUXC_PCR_MUX_ALT5		(5<<8)
+#define IOMUXC_PCR_MUX_ALT6		(6<<8)
+#define IOMUXC_PCR_MUX_ALT7		(7<<8)
+#define IOMUXC_PCR_MUX_ALT8		(8<<8)
+#define IOMUXC_PCR_MUX_ALT9		(9<<8)
+#define IOMUXC_PCR_MUX_ALT10		(10<<8)
+#define IOMUXC_PCR_MUX_ALT11		(11<<8)
+#define IOMUXC_PCR_MUX_ALT12		(12<<8)
+#define IOMUXC_PCR_MUX_ALT13		(13<<8)
+#define IOMUXC_PCR_MUX_ALT14		(14<<8)
+#define IOMUXC_PCR_MUX_ALT15		(15<<8)
+
+#define IOMUXC_PSMI_IMUX_ALT0		(0x0)
+#define IOMUXC_PSMI_IMUX_ALT1		(0x1)
+#define IOMUXC_PSMI_IMUX_ALT2		(0x2)
+#define IOMUXC_PSMI_IMUX_ALT3		(0x3)
+#define IOMUXC_PSMI_IMUX_ALT4		(0x4)
+#define IOMUXC_PSMI_IMUX_ALT5		(0x5)
+#define IOMUXC_PSMI_IMUX_ALT6		(0x6)
+#define IOMUXC_PSMI_IMUX_ALT7		(0x7)
+
+
+#define SIM_SOPT1_EN_SNVS_HARD_RST	(1<<8)
+#define SIM_SOPT1_PMIC_STBY_REQ		(1<<2)
+#define SIM_SOPT1_A7_SW_RESET		(1<<0)
+
+#define IOMUXC_PCR_MUX_ALT_SHIFT	(8)
+#define IOMUXC_PCR_MUX_ALT_MASK		(0xF00)
+#define IOMUXC_PSMI_IMUX_ALT_SHIFT	(0)
+
+#define IOMUXC0_RBASE	((AIPS0_BASE + (AIPS0_SLOT_SIZE * IOMUXC0_AIPS0_SLOT)))
+#define IOMUXC1_RBASE	((AIPS3_BASE + (AIPS3_SLOT_SIZE * IOMUXC1_AIPS3_SLOT)))
+#define WDG0_RBASE	((AIPS0_BASE + (AIPS0_SLOT_SIZE * WDG0_AIPS0_SLOT)))
+#define WDG1_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * WDG1_AIPS2_SLOT)))
+#define WDG2_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * WDG2_AIPS2_SLOT)))
+#define SCG0_RBASE	((AIPS0_BASE + (AIPS0_SLOT_SIZE * SCG0_AIPS0_SLOT)))
+#define SCG1_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * SCG1_AIPS2_SLOT)))
+#define PCC0_RBASE	((AIPS0_BASE + (AIPS0_SLOT_SIZE * PCC0_AIPS0_SLOT)))
+#define PCC1_RBASE	((AIPS1_BASE + (AIPS1_SLOT_SIZE * PCC1_AIPS1_SLOT)))
+#define PCC2_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * PCC2_AIPS2_SLOT)))
+#define PCC3_RBASE	((AIPS3_BASE + (AIPS3_SLOT_SIZE * PCC3_AIPS3_SLOT)))
+#define IOMUXC0_RBASE	((AIPS0_BASE + (AIPS0_SLOT_SIZE * IOMUXC0_AIPS0_SLOT)))
+#define PSMI0_RBASE	((IOMUXC0_RBASE + 0x100)) /* in iomuxc0 after pta and ptb */
+#define CMC0_RBASE	((AIPS1_BASE + (AIPS1_SLOT_SIZE * CMC0_AIPS1_SLOT)))
+#define CMC1_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * CMC1_AIPS2_SLOT)))
+#define OCOTP_BASE_ADDR	((AIPS1_BASE + (AIPS1_SLOT_SIZE * OCOTP_CTRL_AIPS1_SLOT)))
+#define SIM0_RBASE	((AIPS1_BASE + (AIPS1_SLOT_SIZE * SIM0_AIPS1_SLOT)))
+#define SIM1_RBASE	((AIPS1_BASE + (AIPS1_SLOT_SIZE * SIM1_AIPS1_SLOT)))
+#define MMDC0_RBASE	((AIPS3_BASE + (AIPS3_SLOT_SIZE * MMDC0_AIPS3_SLOT)))
+
+#define USBOTG0_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * USBOTG0_AIPS2_SLOT)))
+#define USBOTG1_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * USBOTG1_AIPS2_SLOT)))
+#define USBPHY_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * USBPHY_AIPS2_SLOT)))
+#define USB_PHY0_BASE_ADDR	USBPHY_RBASE
+#define USB_BASE_ADDR		USBOTG0_RBASE
+
+#define LPI2C1_BASE_ADDR	((AIPS0_BASE + (AIPS0_SLOT_SIZE * LPI2C0_AIPS0_SLOT)))
+#define LPI2C2_BASE_ADDR	((AIPS0_BASE + (AIPS0_SLOT_SIZE * LPI2C1_AIPS0_SLOT)))
+#define LPI2C3_BASE_ADDR	((AIPS0_BASE + (AIPS0_SLOT_SIZE * LPI2C2_AIPS0_SLOT)))
+#define LPI2C4_BASE_ADDR	((AIPS0_BASE + (AIPS0_SLOT_SIZE * LPI2C3_AIPS0_SLOT)))
+#define LPI2C5_BASE_ADDR	((AIPS2_BASE + (AIPS2_SLOT_SIZE * LPI2C4_AIPS2_SLOT)))
+#define LPI2C6_BASE_ADDR	((AIPS2_BASE + (AIPS2_SLOT_SIZE * LPI2C5_AIPS2_SLOT)))
+#define LPI2C7_BASE_ADDR	((AIPS3_BASE + (AIPS3_SLOT_SIZE * LPI2C6_AIPS3_SLOT)))
+#define LPI2C8_BASE_ADDR	((AIPS3_BASE + (AIPS3_SLOT_SIZE * LPI2C7_AIPS3_SLOT)))
+
+#define LPUART0_RBASE	((AIPS0_BASE + (AIPS0_SLOT_SIZE * LPUART0_AIPS0_SLOT)))
+#define LPUART1_RBASE	((AIPS0_BASE + (AIPS0_SLOT_SIZE * LPUART1_AIPS0_SLOT)))
+#define LPUART2_RBASE	((AIPS1_BASE + (AIPS1_SLOT_SIZE * LPUART2_AIPS1_SLOT)))
+#define LPUART3_RBASE	((AIPS1_BASE + (AIPS1_SLOT_SIZE * LPUART3_AIPS1_SLOT)))
+#define LPUART4_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * LPUART4_AIPS2_SLOT)))
+#define LPUART5_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * LPUART5_AIPS2_SLOT)))
+#define LPUART6_RBASE	((AIPS3_BASE + (AIPS3_SLOT_SIZE * LPUART6_AIPS3_SLOT)))
+#define LPUART7_RBASE	((AIPS3_BASE + (AIPS3_SLOT_SIZE * LPUART7_AIPS3_SLOT)))
+
+#define USDHC0_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * USDHC0_AIPS2_SLOT)))
+#define USDHC1_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * USDHC1_AIPS2_SLOT)))
+
+#define SNVS_BASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * SNVS_AIPS2_SLOT)))
+#define SNVS_LP_LPCR	(SNVS_BASE + 0x38)
+
+#define RGPIO2P0_RBASE	((AIPS0_BASE + (AIPS0_SLOT_SIZE * RGPIO2P0_AIPS0_SLOT)))
+#define RGPIO2P1_RBASE	((AIPS2_BASE + (AIPS2_SLOT_SIZE * RGPIO2P1_AIPS2_SLOT)))
+
+#define WDG0_PCC_REG	(PCC0_RBASE + (4 * WDG0_PCC0_SLOT))
+#define WDG1_PCC_REG	(PCC2_RBASE + (4 * WDG1_PCC2_SLOT))
+#define CMC0_SRS	(CMC0_RBASE  + 0x20)
+#define CMC0_SSRS	(CMC0_RBASE  + 0x28)
+#define CMC1_SRS	(CMC1_RBASE  + 0x20)
+#define CMC1_SSRS	(CMC1_RBASE  + 0x28)
+
+#define IOMUXC0_PCR0	(IOMUXC0_RBASE + (4 * 0))
+#define IOMUXC0_PCR1	(IOMUXC0_RBASE + (4 * 1))
+#define IOMUXC0_PCR2	(IOMUXC0_RBASE + (4 * 2))
+#define IOMUXC0_PCR3	(IOMUXC0_RBASE + (4 * 3))
+#define IOMUXC0_PSMI62	(PSMI0_RBASE + (4 * 62))
+#define IOMUXC0_PSMI63	(PSMI0_RBASE + (4 * 63))
+#define IOMUXC0_PSMI64	(PSMI0_RBASE + (4 * 64))
+
+#define SCG_CSR		(SCG0_RBASE + 0x010)
+#define SCG_RCCR	(SCG0_RBASE + 0x014)
+#define SCG_VCCR	(SCG0_RBASE + 0x018)
+#define SCG_HCCR	(SCG0_RBASE + 0x01c)
+
+#define LPUART0_PCC_REG	(PCC0_RBASE + (4 * LPUART0_PCC0_SLOT))
+#define LPUART1_PCC_REG	(PCC0_RBASE + (4 * LPUART1_PCC0_SLOT))
+#define LPUART2_PCC_REG	(PCC1_RBASE + (4 * LPUART2_PCC1_SLOT))
+#define LPUART3_PCC_REG	(PCC1_RBASE + (4 * LPUART3_PCC1_SLOT))
+#define LPUART4_PCC_REG	(PCC2_RBASE + (4 * LPUART4_PCC2_SLOT))
+#define LPUART5_PCC_REG	(PCC2_RBASE + (4 * LPUART5_PCC2_SLOT))
+#define LPUART6_PCC_REG	(PCC3_RBASE + (4 * LPUART6_PCC3_SLOT))
+#define LPUART7_PCC_REG	(PCC3_RBASE + (4 * LPUART7_PCC3_SLOT))
+
+#define USDHC0_PCC_REG	(PCC2_RBASE + (4 * USDHC0_PCC2_SLOT))
+#define USDHC1_PCC_REG	(PCC2_RBASE + (4 * USDHC1_PCC2_SLOT))
+
+#define SIM1_PCC_REG	(PCC1_RBASE + (4 * SIM1_PCC1_SLOT))
+#define SCG1_PCC_REG	(PCC2_RBASE + (4 * SCG1_PCC2_SLOT))
+
+#define OCOTP_CTRL_PCC_REG	(PCC1_RBASE + (4 * OCOTP_CTRL_PCC1_SLOT))
+
+#define IOMUXC_DDR_RBASE	((AIPS3_BASE + (AIPS3_SLOT_SIZE * IOMUXC_DDR_AIPS3_SLOT)))
+#define MMDC0_PCC_REG		(PCC3_RBASE + (4 * MMDC0_PCC3_SLOT))
+
+#define CAAM_IPS_BASE_ADDR              (AIPS2_BASE + 0x240000) /* 40240000 */
+
+#define CONFIG_SYS_FSL_SEC_OFFSET       0
+#define CONFIG_SYS_FSL_SEC_ADDR         (CAAM_IPS_BASE_ADDR + \
+					 CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_OFFSET       0x1000
+#define CONFIG_SYS_FSL_JR0_ADDR         (CONFIG_SYS_FSL_SEC_ADDR + \
+					 CONFIG_SYS_FSL_JR0_OFFSET)
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC   1
+
+#define IOMUXC_DPCR_DDR_DQS0	((IOMUXC_DDR_RBASE + (4 * 32)))
+#define IOMUXC_DPCR_DDR_DQS1	((IOMUXC_DDR_RBASE + (4 * 33)))
+#define IOMUXC_DPCR_DDR_DQS2	((IOMUXC_DDR_RBASE + (4 * 34)))
+#define IOMUXC_DPCR_DDR_DQS3	((IOMUXC_DDR_RBASE + (4 * 35)))
+
+
+#define IOMUXC_DPCR_DDR_DQ0	((IOMUXC_DDR_RBASE + (4 * 0)))
+#define IOMUXC_DPCR_DDR_DQ1	((IOMUXC_DDR_RBASE + (4 * 1)))
+#define IOMUXC_DPCR_DDR_DQ2	((IOMUXC_DDR_RBASE + (4 * 2)))
+#define IOMUXC_DPCR_DDR_DQ3	((IOMUXC_DDR_RBASE + (4 * 3)))
+#define IOMUXC_DPCR_DDR_DQ4	((IOMUXC_DDR_RBASE + (4 * 4)))
+#define IOMUXC_DPCR_DDR_DQ5	((IOMUXC_DDR_RBASE + (4 * 5)))
+#define IOMUXC_DPCR_DDR_DQ6	((IOMUXC_DDR_RBASE + (4 * 6)))
+#define IOMUXC_DPCR_DDR_DQ7	((IOMUXC_DDR_RBASE + (4 * 7)))
+#define IOMUXC_DPCR_DDR_DQ8	((IOMUXC_DDR_RBASE + (4 * 8)))
+#define IOMUXC_DPCR_DDR_DQ9	((IOMUXC_DDR_RBASE + (4 * 9)))
+#define IOMUXC_DPCR_DDR_DQ10	((IOMUXC_DDR_RBASE + (4 * 10)))
+#define IOMUXC_DPCR_DDR_DQ11	((IOMUXC_DDR_RBASE + (4 * 11)))
+#define IOMUXC_DPCR_DDR_DQ12	((IOMUXC_DDR_RBASE + (4 * 12)))
+#define IOMUXC_DPCR_DDR_DQ13	((IOMUXC_DDR_RBASE + (4 * 13)))
+#define IOMUXC_DPCR_DDR_DQ14	((IOMUXC_DDR_RBASE + (4 * 14)))
+#define IOMUXC_DPCR_DDR_DQ15	((IOMUXC_DDR_RBASE + (4 * 15)))
+#define IOMUXC_DPCR_DDR_DQ16	((IOMUXC_DDR_RBASE + (4 * 16)))
+#define IOMUXC_DPCR_DDR_DQ17	((IOMUXC_DDR_RBASE + (4 * 17)))
+#define IOMUXC_DPCR_DDR_DQ18	((IOMUXC_DDR_RBASE + (4 * 18)))
+#define IOMUXC_DPCR_DDR_DQ19	((IOMUXC_DDR_RBASE + (4 * 19)))
+#define IOMUXC_DPCR_DDR_DQ20	((IOMUXC_DDR_RBASE + (4 * 20)))
+#define IOMUXC_DPCR_DDR_DQ21	((IOMUXC_DDR_RBASE + (4 * 21)))
+#define IOMUXC_DPCR_DDR_DQ22	((IOMUXC_DDR_RBASE + (4 * 22)))
+#define IOMUXC_DPCR_DDR_DQ23	((IOMUXC_DDR_RBASE + (4 * 23)))
+#define IOMUXC_DPCR_DDR_DQ24	((IOMUXC_DDR_RBASE + (4 * 24)))
+#define IOMUXC_DPCR_DDR_DQ25	((IOMUXC_DDR_RBASE + (4 * 25)))
+#define IOMUXC_DPCR_DDR_DQ26	((IOMUXC_DDR_RBASE + (4 * 26)))
+#define IOMUXC_DPCR_DDR_DQ27	((IOMUXC_DDR_RBASE + (4 * 27)))
+#define IOMUXC_DPCR_DDR_DQ28	((IOMUXC_DDR_RBASE + (4 * 28)))
+#define IOMUXC_DPCR_DDR_DQ29	((IOMUXC_DDR_RBASE + (4 * 29)))
+#define IOMUXC_DPCR_DDR_DQ30	((IOMUXC_DDR_RBASE + (4 * 30)))
+#define IOMUXC_DPCR_DDR_DQ31	((IOMUXC_DDR_RBASE + (4 * 31)))
+
+/* Remap the rgpio2p registers addr to driver's addr */
+#define RGPIO2P_GPIO1_BASE_ADDR	RGPIO2P0_RBASE
+#define RGPIO2P_GPIO2_BASE_ADDR	(RGPIO2P0_RBASE + 0x40)
+#define RGPIO2P_GPIO3_BASE_ADDR	(RGPIO2P1_RBASE)
+#define RGPIO2P_GPIO4_BASE_ADDR	(RGPIO2P1_RBASE + 0x40)
+#define RGPIO2P_GPIO5_BASE_ADDR	(RGPIO2P1_RBASE + 0x80)
+#define RGPIO2P_GPIO6_BASE_ADDR	(RGPIO2P1_RBASE + 0xc0)
+
+/* MMDC registers addresses */
+#define MMDC_MDCTL_OFFSET	(0x000)
+#define MMDC_MDPDC_OFFSET	(0x004)
+#define MMDC_MDOTC_OFFSET	(0x008)
+#define MMDC_MDCFG0_OFFSET	(0x00C)
+#define MMDC_MDCFG1_OFFSET	(0x010)
+#define MMDC_MDCFG2_OFFSET	(0x014)
+#define MMDC_MDMISC_OFFSET	(0x018)
+#define MMDC_MDSCR_OFFSET	(0x01C)
+#define MMDC_MDREF_OFFSET	(0x020)
+#define MMDC_MDRWD_OFFSET	(0x02C)
+#define MMDC_MDOR_OFFSET	(0x030)
+#define MMDC_MDMRR_OFFSET	(0x034)
+#define MMDC_MDCFG3LP_OFFSET	(0x038)
+#define MMDC_MDMR4_OFFSET	(0x03C)
+#define MMDC_MDASP_OFFSET	(0x040)
+
+#define MMDC_MAARCR_OFFSET	(0x400)
+#define MMDC_MAPSR_OFFSET	(0x404)
+#define MMDC_MAEXIDR0_OFFSET	(0x408)
+#define MMDC_MAEXIDR1_OFFSET	(0x40C)
+#define MMDC_MADPCR0_OFFSET	(0x410)
+#define MMDC_MADPCR1_OFFSET	(0x414)
+#define MMDC_MADPSR0_OFFSET	(0x418)
+#define MMDC_MADPSR1_OFFSET	(0x41C)
+#define MMDC_MADPSR2_OFFSET	(0x420)
+#define MMDC_MADPSR3_OFFSET	(0x424)
+#define MMDC_MADPSR4_OFFSET	(0x428)
+#define MMDC_MADPSR5_OFFSET	(0x42C)
+#define MMDC_MASBS0_OFFSET	(0x430)
+#define MMDC_MASBS1_OFFSET	(0x434)
+#define MMDC_MAGENP_OFFSET	(0x440)
+
+#define MMDC_MPZQHWCTRL_OFFSET	(0x800)
+#define MMDC_MPZQSWCTRL_OFFSET	(0x804)
+#define MMDC_MPWLGCR_OFFSET	(0x808)
+#define MMDC_MPWLDECTRL0_OFFSET	(0x80C)
+#define MMDC_MPWLDECTRL1_OFFSET	(0x810)
+#define MMDC_MPWLDLST_OFFSET	(0x814)
+#define MMDC_MPODTCTRL_OFFSET	(0x818)
+#define MMDC_MPREDQBY0DL_OFFSET	(0x81C)
+#define MMDC_MPREDQBY1DL_OFFSET	(0x820)
+#define MMDC_MPREDQBY2DL_OFFSET	(0x824)
+#define MMDC_MPREDQBY3DL_OFFSET	(0x828)
+#define MMDC_MPWRDQBY0DL_OFFSET	(0x82C)
+#define MMDC_MPWRDQBY1DL_OFFSET	(0x830)
+#define MMDC_MPWRDQBY2DL_OFFSET	(0x834)
+#define MMDC_MPWRDQBY3DL_OFFSET	(0x838)
+#define MMDC_MPDGCTRL0_OFFSET	(0x83C)
+#define MMDC_MPDGCTRL1_OFFSET	(0x840)
+#define MMDC_MPDGDLST_OFFSET	(0x844)
+#define MMDC_MPRDDLCTL_OFFSET	(0x848)
+#define MMDC_MPRDDLST_OFFSET	(0x84C)
+#define MMDC_MPWRDLCTL_OFFSET	(0x850)
+#define MMDC_MPWRDLST_OFFSET	(0x854)
+#define MMDC_MPSDCTRL_OFFSET	(0x858)
+#define MMDC_MPZQLP2CTL_OFFSET	(0x85C)
+#define MMDC_MPRDDLHWCTL_OFFSET	(0x860)
+#define MMDC_MPWRDLHWCTL_OFFSET	(0x864)
+#define MMDC_MPRDDLHWST0_OFFSET	(0x868)
+#define MMDC_MPRDDLHWST1_OFFSET	(0x86C)
+#define MMDC_MPWRDLHWST0_OFFSET	(0x870)
+#define MMDC_MPWRDLHWST1_OFFSET	(0x874)
+#define MMDC_MPWLHWERR_OFFSET	(0x878)
+#define MMDC_MPDGHWST0_OFFSET	(0x87C)
+#define MMDC_MPDGHWST1_OFFSET	(0x880)
+#define MMDC_MPDGHWST2_OFFSET	(0x884)
+#define MMDC_MPDGHWST3_OFFSET	(0x888)
+#define MMDC_MPPDCMPR1_OFFSET	(0x88C)
+#define MMDC_MPPDCMPR2_OFFSET	(0x890)
+#define MMDC_MPSWDAR_OFFSET	(0x894)
+#define MMDC_MPSWDRDR0_OFFSET	(0x898)
+#define MMDC_MPSWDRDR1_OFFSET	(0x89C)
+#define MMDC_MPSWDRDR2_OFFSET	(0x8A0)
+#define MMDC_MPSWDRDR3_OFFSET	(0x8A4)
+#define MMDC_MPSWDRDR4_OFFSET	(0x8A8)
+#define MMDC_MPSWDRDR5_OFFSET	(0x8AC)
+#define MMDC_MPSWDRDR6_OFFSET	(0x8B0)
+#define MMDC_MPSWDRDR7_OFFSET	(0x8B4)
+#define MMDC_MPMUR_OFFSET	(0x8B8)
+#define MMDC_MPWRCADL_OFFSET	(0x8BC)
+#define MMDC_MPDCCR_OFFSET	(0x8C0)
+#define MMDC_MPBC_OFFSET	(0x8C4)
+#define MMDC_MPSWDRAR_OFFSET	(0x8C8)
+
+/* First MMDC invalid IPS address */
+#define MMDC_IPS_ILL_ADDR_START_OFFSET	(0x8CC)
+#define MMDC_REGS_BASE			MMDC0_RBASE
+
+#define MMDC_MDCTL	((MMDC_REGS_BASE + MMDC_MDCTL_OFFSET))
+#define MMDC_MDPDC	((MMDC_REGS_BASE + MMDC_MDPDC_OFFSET))
+#define MMDC_MDOTC	((MMDC_REGS_BASE + MMDC_MDOTC_OFFSET))
+#define MMDC_MDCFG0	((MMDC_REGS_BASE + MMDC_MDCFG0_OFFSET))
+#define MMDC_MDCFG1	((MMDC_REGS_BASE + MMDC_MDCFG1_OFFSET))
+#define MMDC_MDCFG2	((MMDC_REGS_BASE + MMDC_MDCFG2_OFFSET))
+#define MMDC_MDMISC	((MMDC_REGS_BASE + MMDC_MDMISC_OFFSET))
+#define MMDC_MDSCR	((MMDC_REGS_BASE + MMDC_MDSCR_OFFSET))
+#define MMDC_MDREF	((MMDC_REGS_BASE + MMDC_MDREF_OFFSET))
+#define MMDC_MDRWD	((MMDC_REGS_BASE + MMDC_MDRWD_OFFSET))
+#define MMDC_MDOR	((MMDC_REGS_BASE + MMDC_MDOR_OFFSET))
+#define MMDC_MDMRR	((MMDC_REGS_BASE + MMDC_MDMRR_OFFSET))
+#define MMDC_MDCFG3LP	((MMDC_REGS_BASE + MMDC_MDCFG3LP_OFFSET))
+#define MMDC_MDMR4	((MMDC_REGS_BASE + MMDC_MDMR4_OFFSET))
+#define MMDC_MDASP	((MMDC_REGS_BASE + MMDC_MDASP_OFFSET))
+
+#define MMDC_MAARCR	((MMDC_REGS_BASE + MMDC_MAARCR_OFFSET))
+#define MMDC_MAPSR	((MMDC_REGS_BASE + MMDC_MAPSR_OFFSET))
+#define MMDC_MAEXIDR0	((MMDC_REGS_BASE + MMDC_MAEXIDR0_OFFSET))
+#define MMDC_MAEXIDR1	((MMDC_REGS_BASE + MMDC_MAEXIDR1_OFFSET))
+#define MMDC_MADPCR0	((MMDC_REGS_BASE + MMDC_MADPCR0_OFFSET))
+#define MMDC_MADPCR1	((MMDC_REGS_BASE + MMDC_MADPCR1_OFFSET))
+#define MMDC_MADPSR0	((MMDC_REGS_BASE + MMDC_MADPSR0_OFFSET))
+#define MMDC_MADPSR1	((MMDC_REGS_BASE + MMDC_MADPSR1_OFFSET))
+#define MMDC_MADPSR2	((MMDC_REGS_BASE + MMDC_MADPSR2_OFFSET))
+#define MMDC_MADPSR3	((MMDC_REGS_BASE + MMDC_MADPSR3_OFFSET))
+#define MMDC_MADPSR4	((MMDC_REGS_BASE + MMDC_MADPSR4_OFFSET))
+#define MMDC_MADPSR5	((MMDC_REGS_BASE + MMDC_MADPSR5_OFFSET))
+#define MMDC_MASBS0	((MMDC_REGS_BASE + MMDC_MASBS0_OFFSET))
+#define MMDC_MASBS1	((MMDC_REGS_BASE + MMDC_MASBS1_OFFSET))
+#define MMDC_MAGENP	((MMDC_REGS_BASE + MMDC_MAGENP_OFFSET))
+
+#define MMDC_MPZQHWCTRL		((MMDC_REGS_BASE + MMDC_MPZQHWCTRL_OFFSET))
+#define MMDC_MPZQSWCTRL		((MMDC_REGS_BASE + MMDC_MPZQSWCTRL_OFFSET))
+#define MMDC_MPWLGCR		((MMDC_REGS_BASE + MMDC_MPWLGCR_OFFSET))
+#define MMDC_MPWLDECTRL0	((MMDC_REGS_BASE + MMDC_MPWLDECTRL0_OFFSET))
+#define MMDC_MPWLDECTRL1	((MMDC_REGS_BASE + MMDC_MPWLDECTRL1_OFFSET))
+#define MMDC_MPWLDLST		((MMDC_REGS_BASE + MMDC_MPWLDLST_OFFSET))
+#define MMDC_MPODTCTRL		((MMDC_REGS_BASE + MMDC_MPODTCTRL_OFFSET))
+#define MMDC_MPREDQBY0DL	((MMDC_REGS_BASE + MMDC_MPREDQBY0DL_OFFSET))
+#define MMDC_MPREDQBY1DL	((MMDC_REGS_BASE + MMDC_MPREDQBY1DL_OFFSET))
+#define MMDC_MPREDQBY2DL	((MMDC_REGS_BASE + MMDC_MPREDQBY2DL_OFFSET))
+#define MMDC_MPREDQBY3DL	((MMDC_REGS_BASE + MMDC_MPREDQBY3DL_OFFSET))
+#define MMDC_MPWRDQBY0DL	((MMDC_REGS_BASE + MMDC_MPWRDQBY0DL_OFFSET))
+#define MMDC_MPWRDQBY1DL	((MMDC_REGS_BASE + MMDC_MPWRDQBY1DL_OFFSET))
+#define MMDC_MPWRDQBY2DL	((MMDC_REGS_BASE + MMDC_MPWRDQBY2DL_OFFSET))
+#define MMDC_MPWRDQBY3DL	((MMDC_REGS_BASE + MMDC_MPWRDQBY3DL_OFFSET))
+#define MMDC_MPDGCTRL0		((MMDC_REGS_BASE + MMDC_MPDGCTRL0_OFFSET))
+#define MMDC_MPDGCTRL1		((MMDC_REGS_BASE + MMDC_MPDGCTRL1_OFFSET))
+#define MMDC_MPDGDLST		((MMDC_REGS_BASE + MMDC_MPDGDLST_OFFSET))
+#define MMDC_MPRDDLCTL		((MMDC_REGS_BASE + MMDC_MPRDDLCTL_OFFSET))
+#define MMDC_MPRDDLST		((MMDC_REGS_BASE + MMDC_MPRDDLST_OFFSET))
+#define MMDC_MPWRDLCTL		((MMDC_REGS_BASE + MMDC_MPWRDLCTL_OFFSET))
+#define MMDC_MPWRDLST		((MMDC_REGS_BASE + MMDC_MPWRDLST_OFFSET))
+#define MMDC_MPSDCTRL		((MMDC_REGS_BASE + MMDC_MPSDCTRL_OFFSET))
+#define MMDC_MPZQLP2CTL		((MMDC_REGS_BASE + MMDC_MPZQLP2CTL_OFFSET))
+#define MMDC_MPRDDLHWCTL	((MMDC_REGS_BASE + MMDC_MPRDDLHWCTL_OFFSET))
+#define MMDC_MPWRDLHWCTL	((MMDC_REGS_BASE + MMDC_MPWRDLHWCTL_OFFSET))
+#define MMDC_MPRDDLHWST0	((MMDC_REGS_BASE + MMDC_MPRDDLHWST0_OFFSET))
+#define MMDC_MPRDDLHWST1	((MMDC_REGS_BASE + MMDC_MPRDDLHWST1_OFFSET))
+#define MMDC_MPWRDLHWST0	((MMDC_REGS_BASE + MMDC_MPWRDLHWST0_OFFSET))
+#define MMDC_MPWRDLHWST1	((MMDC_REGS_BASE + MMDC_MPWRDLHWST1_OFFSET))
+#define MMDC_MPWLHWERR		((MMDC_REGS_BASE + MMDC_MPWLHWERR_OFFSET))
+#define MMDC_MPDGHWST0		((MMDC_REGS_BASE + MMDC_MPDGHWST0_OFFSET))
+#define MMDC_MPDGHWST1		((MMDC_REGS_BASE + MMDC_MPDGHWST1_OFFSET))
+#define MMDC_MPDGHWST2		((MMDC_REGS_BASE + MMDC_MPDGHWST2_OFFSET))
+#define MMDC_MPDGHWST3		((MMDC_REGS_BASE + MMDC_MPDGHWST3_OFFSET))
+#define MMDC_MPPDCMPR1		((MMDC_REGS_BASE + MMDC_MPPDCMPR1_OFFSET))
+#define MMDC_MPPDCMPR2		((MMDC_REGS_BASE + MMDC_MPPDCMPR2_OFFSET))
+#define MMDC_MPSWDAR		((MMDC_REGS_BASE + MMDC_MPSWDAR_OFFSET))
+#define MMDC_MPSWDRDR0		((MMDC_REGS_BASE + MMDC_MPSWDRDR0_OFFSET))
+#define MMDC_MPSWDRDR1		((MMDC_REGS_BASE + MMDC_MPSWDRDR1_OFFSET))
+#define MMDC_MPSWDRDR2		((MMDC_REGS_BASE + MMDC_MPSWDRDR2_OFFSET))
+#define MMDC_MPSWDRDR3		((MMDC_REGS_BASE + MMDC_MPSWDRDR3_OFFSET))
+#define MMDC_MPSWDRDR4		((MMDC_REGS_BASE + MMDC_MPSWDRDR4_OFFSET))
+#define MMDC_MPSWDRDR5		((MMDC_REGS_BASE + MMDC_MPSWDRDR5_OFFSET))
+#define MMDC_MPSWDRDR6		((MMDC_REGS_BASE + MMDC_MPSWDRDR6_OFFSET))
+#define MMDC_MPSWDRDR7		((MMDC_REGS_BASE + MMDC_MPSWDRDR7_OFFSET))
+#define MMDC_MPMUR		((MMDC_REGS_BASE + MMDC_MPMUR_OFFSET))
+#define MMDC_MPWRCADL		((MMDC_REGS_BASE + MMDC_MPWRCADL_OFFSET))
+#define MMDC_MPDCCR		((MMDC_REGS_BASE + MMDC_MPDCCR_OFFSET))
+#define MMDC_MPBC		((MMDC_REGS_BASE + MMDC_MPBC_OFFSET))
+#define MMDC_MPSWDRAR		((MMDC_REGS_BASE + MMDC_MPSWDRAR_OFFSET))
+
+/* MMDC registers bit defines */
+#define MMDC_MDCTL_SDE_0		(31)
+#define MMDC_MDCTL_SDE_1		(30)
+#define MMDC_MDCTL_ROW			(24)
+#define MMDC_MDCTL_COL			(20)
+#define MMDC_MDCTL_BL			(19)
+#define MMDC_MDCTL_DSIZ			(16)
+
+/* MDMISC */
+#define MMDC_MDMISC_CS0_RDY		(31)
+#define MMDC_MDMISC_CS1_RDY		(30)
+#define MMDC_MDMISC_CK1_DEL		(22)
+#define MMDC_MDMISC_CK1_GATING		(21)
+#define MMDC_MDMISC_CALIB_PER_CS	(20)
+#define MMDC_MDMISC_ADDR_MIRROR		(19)
+#define MMDC_MDMISC_LHD			(18)
+#define MMDC_MDMISC_WALAT		(16)
+#define MMDC_MDMISC_BI			(12)
+#define MMDC_MDMISC_LPDDR2_S		(11)
+#define MMDC_MDMISC_MIF3_MODE		(9)
+#define MMDC_MDMISC_RALAT		(6)
+#define MMDC_MDMISC_DDR_4_BANK		(5)
+#define MMDC_MDMISC_DDR_TYPE		(3)
+#define MMDC_MDMISC_RST			(1)
+
+/* MPWLGCR */
+#define MMDC_MPWLGCR_WL_HW_ERR		(8)
+
+/* MDSCR */
+#define MMDC_MDSCR_CMD_ADDR_MSB		(24)
+#define MMDC_MDSCR_MR_OP		(24)
+#define MMDC_MDSCR_CMD_ADDR_LSB		(16)
+#define MMDC_MDSCR_MR_ADDR		(16)
+#define MMDC_MDSCR_CON_REQ		(15)
+#define MMDC_MDSCR_CON_ACK		(14)
+#define MMDC_MDSCR_MRR_READ_DATA_VALID	(10)
+#define MMDC_MDSCR_WL_EN		(9)
+#define MMDC_MDSCR_CMD			(4)
+#define MMDC_MDSCR_CMD_CS		(3)
+#define MMDC_MDSCR_CMD_BA		(0)
+
+/* MPZQHWCTRL */
+#define MMDC_MPZQHWCTRL_ZQ_HW_FOR	(16)
+#define MMDC_MPZQHWCTRL_ZQ_MODE		(0)
+
+/* MPZQSWCTRL */
+#define MMDC_MPZQSWCTRL_ZQ_CMP_OUT_SMP	(16)
+#define MMDC_MPZQSWCTRL_USE_ZQ_SW_VAL	(13)
+#define MMDC_MPZQSWCTRL_ZQ_SW_PD	(12)
+#define MMDC_MPZQSWCTRL_ZQ_SW_PD_VAL	(7)
+#define MMDC_MPZQSWCTRL_ZQ_SW_PU_VAL	(2)
+#define MMDC_MPZQSWCTRL_ZQ_SW_RES	(1)
+#define MMDC_MPZQSWCTRL_ZQ_SW_FOR	(0)
+
+/* MPDGCTRL0 */
+#define MMDC_MPDGCTRL0_RST_RD_FIFO	(31)
+#define MMDC_MPDGCTRL0_DG_CMP_CYC	(30)
+#define MMDC_MPDGCTRL0_DG_DIS		(29)
+#define MMDC_MPDGCTRL0_HW_DG_EN		(28)
+#define MMDC_MPDGCTRL0_HW_DG_ERR	(12)
+
+/* MPRDDLHWCTL */
+#define MMDC_MPRDDLHWCTL_HW_RD_DL_CMP_CYC	(5)
+#define MMDC_MPRDDLHWCTL_HW_RD_DL_EN		(4)
+#define MMDC_MPRDDLHWCTL_HW_RD_DL_ERR		(0)
+
+/* MPWRDLHWCTL */
+#define MMDC_MPWRDLHWCTL_HW_WR_DL_CMP_CYC	(5)
+#define MMDC_MPWRDLHWCTL_HW_WR_DL_EN		(4)
+#define MMDC_MPWRDLHWCTL_HW_WR_DL_ERR		(0)
+
+/* MPSWDAR */
+#define MMDC_MPSWDAR_TEST_DUMMY_EN	(6)
+#define MMDC_MPSWDAR_SW_DUM_CMP3	(5)
+#define MMDC_MPSWDAR_SW_DUM_CMP2	(4)
+#define MMDC_MPSWDAR_SW_DUM_CMP1	(3)
+#define MMDC_MPSWDAR_SW_DUM_CMP0	(2)
+#define MMDC_MPSWDAR_SW_DUMMY_RD	(1)
+#define MMDC_MPSWDAR_SW_DUMMY_WR	(0)
+
+/* MADPCR0 */
+#define MMDC_MADPCR0_SBS		(9)
+#define MMDC_MADPCR0_SBS_EN		(8)
+
+/* MASBS1 */
+#define MMDC_MASBS1_SBS_VLD		(0)
+#define MMDC_MASBS1_SBS_TYPE		(1)
+
+/* MDREF */
+#define MMDC_MDREF_REF_CNT		(16)
+#define MMDC_MDREF_REF_SEL		(14)
+#define MMDC_MDREF_REFR			(11)
+#define MMDC_MDREF_START_REF		(0)
+
+/* MPWLGCR */
+#define MMDC_MPWLGCR_HW_WL_EN		(0)
+
+/* MPBC */
+#define MMDC_MPBC_BIST_DM_LP_EN		(0)
+#define MMDC_MPBC_BIST_CA0_LP_EN	(1)
+#define MMDC_MPBC_BIST_DQ0_LP_EN	(3)
+#define MMDC_MPBC_BIST_DQ1_LP_EN	(4)
+#define MMDC_MPBC_BIST_DQ2_LP_EN	(5)
+#define MMDC_MPBC_BIST_DQ3_LP_EN	(6)
+
+/* MPMUR */
+#define MMDC_MPMUR_FRC_MSR		(11)
+
+/* MPODTCTRL */
+#define MMDC_MPODTCTRL_ODT_RD_ACT_EN	(3)
+#define MMDC_MPODTCTRL_ODT_RD_PAS_EN	(2)
+#define MMDC_MPODTCTRL_ODT_WR_ACT_EN	(1)
+#define MMDC_MPODTCTRL_ODT_WR_PAS_EN	(0)
+
+/* MAPSR */
+#define MMDC_MAPSR_DVACK		(25)
+#define MMDC_MAPSR_LPACK		(24)
+#define MMDC_MAPSR_DVFS			(21)
+#define MMDC_MAPSR_LPMD			(20)
+
+/* MAARCR */
+#define MMDC_MAARCR_ARCR_EXC_ERR_EN	(28)
+
+/* MPZQLP2CTL */
+#define MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQCS	(24)
+#define MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQCL	(16)
+#define MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQINIT	(0)
+
+/* MDCFG3LP */
+#define MMDC_MDCFG3LP_tRC_LP		(16)
+#define MMDC_MDCFG3LP_tRCD_LP		(8)
+#define MMDC_MDCFG3LP_tRPpb_LP		(4)
+#define MMDC_MDCFG3LP_tRPab_LP		(0)
+
+/* MDOR */
+#define MMDC_MDOR_tXPR			(16)
+#define MMDC_MDOR_SDE_to_RST		(8)
+#define MMDC_MDOR_RST_to_CKE		(0)
+
+/* MDCFG0 */
+#define MMDC_MDCFG0_tRFC		(24)
+#define MMDC_MDCFG0_tXS			(16)
+#define MMDC_MDCFG0_tXP			(13)
+#define MMDC_MDCFG0_tXPDLL		(9)
+#define MMDC_MDCFG0_tFAW		(4)
+#define MMDC_MDCFG0_tCL			(0)
+
+/* MDCFG1 */
+#define MMDC_MDCFG1_tRCD		(29)
+#define MMDC_MDCFG1_tRP			(26)
+#define MMDC_MDCFG1_tRC			(21)
+#define MMDC_MDCFG1_tRAS		(16)
+#define MMDC_MDCFG1_tRPA		(15)
+#define MMDC_MDCFG1_tWR			(9)
+#define MMDC_MDCFG1_tMRD		(5)
+#define MMDC_MDCFG1_tCWL		(0)
+
+/* MDCFG2 */
+#define MMDC_MDCFG2_tDLLK		(16)
+#define MMDC_MDCFG2_tRTP		(6)
+#define MMDC_MDCFG2_tWTR		(3)
+#define MMDC_MDCFG2_tRRD		(0)
+
+/* MDRWD */
+#define MMDC_MDRWD_tDAI			(16)
+#define MMDC_MDRWD_RTW_SAME		(12)
+#define MMDC_MDRWD_WTR_DIFF		(9)
+#define MMDC_MDRWD_WTW_DIFF		(6)
+#define MMDC_MDRWD_RTW_DIFF		(3)
+#define MMDC_MDRWD_RTR_DIFF		(0)
+
+/* MDPDC */
+#define MMDC_MDPDC_PRCT_1		(28)
+#define MMDC_MDPDC_PRCT_0		(24)
+#define MMDC_MDPDC_tCKE			(16)
+#define MMDC_MDPDC_PWDT_1		(12)
+#define MMDC_MDPDC_PWDT_0		(8)
+#define MMDC_MDPDC_SLOW_PD		(7)
+#define MMDC_MDPDC_BOTH_CS_PD		(6)
+#define MMDC_MDPDC_tCKSRX		(3)
+#define MMDC_MDPDC_tCKSRE		(0)
+
+/* MDASP */
+#define MMDC_MDASP_CS0_END		(0)
+
+/* MAEXIDR0 */
+#define MMDC_MAEXIDR0_EXC_ID_MONITOR1	(16)
+#define MMDC_MAEXIDR0_EXC_ID_MONITOR0	(0)
+
+/* MAEXIDR1 */
+#define MMDC_MAEXIDR1_EXC_ID_MONITOR3	(16)
+#define MMDC_MAEXIDR1_EXC_ID_MONITOR2	(0)
+
+/* MPWRDLCTL */
+#define MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET3	(24)
+#define MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET2	(16)
+#define MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET1	(8)
+#define MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET0	(0)
+
+/* MPRDDLCTL */
+#define MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET3	(24)
+#define MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET2	(16)
+#define MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET1	(8)
+#define MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET0	(0)
+
+/* MPWRDQBY0DL */
+#define MMDC_MPWRDQBY0DL_WR_DM0_DEL	(30)
+#define MMDC_MPWRDQBY0DL_WR_DQ7_DEL	(28)
+#define MMDC_MPWRDQBY0DL_WR_DQ6_DEL	(24)
+#define MMDC_MPWRDQBY0DL_WR_DQ5_DEL	(20)
+#define MMDC_MPWRDQBY0DL_WR_DQ4_DEL	(16)
+#define MMDC_MPWRDQBY0DL_WR_DQ3_DEL	(12)
+#define MMDC_MPWRDQBY0DL_WR_DQ2_DEL	(8)
+#define MMDC_MPWRDQBY0DL_WR_DQ1_DEL	(4)
+#define MMDC_MPWRDQBY0DL_WR_DQ0_DEL	(0)
+
+/* MPWRDQBY1DL */
+#define MMDC_MPWRDQBY1DL_WR_DM1_DEL	(30)
+#define MMDC_MPWRDQBY1DL_WR_DQ15_DEL	(28)
+#define MMDC_MPWRDQBY1DL_WR_DQ14_DEL	(24)
+#define MMDC_MPWRDQBY1DL_WR_DQ13_DEL	(20)
+#define MMDC_MPWRDQBY1DL_WR_DQ12_DEL	(16)
+#define MMDC_MPWRDQBY1DL_WR_DQ11_DEL	(12)
+#define MMDC_MPWRDQBY1DL_WR_DQ10_DEL	(8)
+#define MMDC_MPWRDQBY1DL_WR_DQ9_DEL	(4)
+#define MMDC_MPWRDQBY1DL_WR_DQ8_DEL	(0)
+
+/* MPWRDQBY2DL */
+#define MMDC_MPWRDQBY2DL_WR_DM2_DEL	(30)
+#define MMDC_MPWRDQBY2DL_WR_DQ23_DEL	(28)
+#define MMDC_MPWRDQBY2DL_WR_DQ22_DEL	(24)
+#define MMDC_MPWRDQBY2DL_WR_DQ21_DEL	(20)
+#define MMDC_MPWRDQBY2DL_WR_DQ20_DEL	(16)
+#define MMDC_MPWRDQBY2DL_WR_DQ19_DEL	(12)
+#define MMDC_MPWRDQBY2DL_WR_DQ18_DEL	(8)
+#define MMDC_MPWRDQBY2DL_WR_DQ17_DEL	(4)
+#define MMDC_MPWRDQBY2DL_WR_DQ16_DEL	(0)
+
+/* MPWRDQBY3DL */
+#define MMDC_MPWRDQBY3DL_WR_DM3_DEL	(30)
+#define MMDC_MPWRDQBY3DL_WR_DQ31_DEL	(28)
+#define MMDC_MPWRDQBY3DL_WR_DQ30_DEL	(24)
+#define MMDC_MPWRDQBY3DL_WR_DQ29_DEL	(20)
+#define MMDC_MPWRDQBY3DL_WR_DQ28_DEL	(16)
+#define MMDC_MPWRDQBY3DL_WR_DQ27_DEL	(12)
+#define MMDC_MPWRDQBY3DL_WR_DQ26_DEL	(8)
+#define MMDC_MPWRDQBY3DL_WR_DQ25_DEL	(4)
+#define MMDC_MPWRDQBY3DL_WR_DQ24_DEL	(0)
+
+/* Fields masks */
+#define MMDC_MDCTL_SDE_0_MASK	((0x1 << MMDC_MDCTL_SDE_0))
+#define MMDC_MDCTL_SDE_1_MASK	((0x1 << MMDC_MDCTL_SDE_1))
+#define MMDC_MDCTL_BL_MASK	((0x1 << MMDC_MDCTL_BL))
+#define MMDC_MDCTL_ROW_MASK	((0x7 << MMDC_MDCTL_ROW))
+#define MMDC_MDCTL_COL_MASK	((0x7 << MMDC_MDCTL_COL))
+#define MMDC_MDCTL_DSIZ_MASK	((0x3 << MMDC_MDCTL_DSIZ))
+
+/* MDMISC */
+#define MMDC_MDMISC_CS0_RDY_MASK	((0x1 << MMDC_MDMISC_CS0_RDY))
+#define MMDC_MDMISC_CS1_RDY_MASK	((0x1 << MMDC_MDMISC_CS1_RDY))
+#define MMDC_MDMISC_CK1_DEL_MASK	((0x3 << MMDC_MDMISC_CK1_DEL))
+#define MMDC_MDMISC_CK1_GATING_MASK	((0x1 << MMDC_MDMISC_CK1_GATING))
+#define MMDC_MDMISC_CALIB_PER_CS_MASK	((0x1 << MMDC_MDMISC_CALIB_PER_CS))
+#define MMDC_MDMISC_ADDR_MIRROR_MASK	((0x1 << MMDC_MDMISC_ADDR_MIRROR))
+#define MMDC_MDMISC_LHD_MASK		((0x1 << MMDC_MDMISC_LHD))
+#define MMDC_MDMISC_WALAT_MASK		((0x3 << MMDC_MDMISC_WALAT))
+#define MMDC_MDMISC_BI_MASK		((0x1 << MMDC_MDMISC_BI))
+#define MMDC_MDMISC_LPDDR2_S_MASK	((0x1 << MMDC_MDMISC_LPDDR2_S))
+#define MMDC_MDMISC_MIF3_MODE_MASK	((0x3 << MMDC_MDMISC_MIF3_MODE))
+#define MMDC_MDMISC_RALAT_MASK		((0x7 << MMDC_MDMISC_RALAT))
+#define MMDC_MDMISC_DDR_4_BANK_MASK	((0x1 << MMDC_MDMISC_DDR_4_BANK))
+#define MMDC_MDMISC_DDR_TYPE_MASK	((0x3 << MMDC_MDMISC_DDR_TYPE))
+#define MMDC_MDMISC_RST_MASK		((0x1 << MMDC_MDMISC_RST))
+
+/* MPWLGCR */
+#define MMDC_MPWLGCR_WL_HW_ERR_MASK	((0xf << MMDC_MPWLGCR_WL_HW_ERR))
+
+/* MDSCR */
+#define MMDC_MDSCR_CMD_ADDR_MSB_MASK	((0xff << MMDC_MDSCR_CMD_ADDR_MSB))
+#define MMDC_MDSCR_MR_OP_MASK		((0xff << MMDC_MDSCR_MR_OP))
+#define MMDC_MDSCR_CMD_ADDR_LSB_MASK	((0xff << MMDC_MDSCR_CMD_ADDR_LSB))
+#define MMDC_MDSCR_MR_ADDR_MASK		((0xff << MMDC_MDSCR_MR_ADDR))
+#define MMDC_MDSCR_CON_REQ_MASK		((0x1  << MMDC_MDSCR_CON_REQ))
+#define MMDC_MDSCR_CON_ACK_MASK		((0x1  << MMDC_MDSCR_CON_ACK))
+#define MMDC_MDSCR_MRR_READ_DATA_VALID_MASK	((0x1  << MMDC_MDSCR_MRR_READ_DATA_VALID))
+#define MMDC_MDSCR_WL_EN_MASK		((0x1  << MMDC_MDSCR_WL_EN))
+#define MMDC_MDSCR_CMD_MASK		((0x7  << MMDC_MDSCR_CMD))
+#define MMDC_MDSCR_CMD_CS_MASK		((0x1  << MMDC_MDSCR_CMD_CS))
+#define MMDC_MDSCR_CMD_BA_MASK		((0x7  << MMDC_MDSCR_CMD_BA))
+
+/* MPZQHWCTRL */
+#define MMDC_MPZQHWCTRL_ZQ_HW_FOR_MASK	((0x1 << MMDC_MPZQHWCTRL_ZQ_HW_FOR))
+#define MMDC_MPZQHWCTRL_ZQ_MODE_MASK	((0x3 << MMDC_MPZQHWCTRL_ZQ_MODE))
+
+/* MPZQSWCTRL */
+#define MMDC_MPZQSWCTRL_ZQ_CMP_OUT_SMP_MASK	((0x3  << MMDC_MPZQSWCTRL_ZQ_CMP_OUT_SMP))
+#define MMDC_MPZQSWCTRL_USE_ZQ_SW_VAL_MASK	((0x1  << MMDC_MPZQSWCTRL_USE_ZQ_SW_VAL))
+#define MMDC_MPZQSWCTRL_ZQ_SW_PD_MASK		((0x1  << MMDC_MPZQSWCTRL_ZQ_SW_PD))
+#define MMDC_MPZQSWCTRL_ZQ_SW_PD_VAL_MASK	((0x1f << MMDC_MPZQSWCTRL_ZQ_SW_PD_VAL))
+#define MMDC_MPZQSWCTRL_ZQ_SW_PU_VAL_MASK	((0x1f << MMDC_MPZQSWCTRL_ZQ_SW_PU_VAL))
+#define MMDC_MPZQSWCTRL_ZQ_SW_RES_MASK		((0x1  << MMDC_MPZQSWCTRL_ZQ_SW_RES))
+#define MMDC_MPZQSWCTRL_ZQ_SW_FOR_MASK		((0x1  << MMDC_MPZQSWCTRL_ZQ_SW_FOR))
+
+/* MPDGCTRL0 */
+#define MMDC_MPDGCTRL0_RST_RD_FIFO_MASK		((0x1 << MMDC_MPDGCTRL0_RST_RD_FIFO))
+#define MMDC_MPDGCTRL0_DG_CMP_CYC_MASK		((0x1 << MMDC_MPDGCTRL0_DG_CMP_CYC))
+#define MMDC_MPDGCTRL0_DG_DIS_MASK		((0x1 << MMDC_MPDGCTRL0_DG_DIS))
+#define MMDC_MPDGCTRL0_HW_DG_EN_MASK		((0x1 << MMDC_MPDGCTRL0_HW_DG_EN))
+#define MMDC_MPDGCTRL0_HW_DG_ERR_MASK		((0x1 << MMDC_MPDGCTRL0_HW_DG_ERR))
+
+/* MPRDDLHWCTL */
+#define MMDC_MPRDDLHWCTL_HW_RD_DL_CMP_CYC_MASK	((0x1 << MMDC_MPRDDLHWCTL_HW_RD_DL_CMP_CYC))
+#define MMDC_MPRDDLHWCTL_HW_RD_DL_EN_MASK	((0x1 << MMDC_MPRDDLHWCTL_HW_RD_DL_EN))
+#define MMDC_MPRDDLHWCTL_HW_RD_DL_ERR_MASK	((0xf << MMDC_MPRDDLHWCTL_HW_RD_DL_ERR))
+
+/* MPWRDLHWCTL */
+#define MMDC_MPWRDLHWCTL_HW_WR_DL_CMP_CYC_MASK	((0x1 << MMDC_MPWRDLHWCTL_HW_WR_DL_CMP_CYC))
+#define MMDC_MPWRDLHWCTL_HW_WR_DL_EN_MASK	((0x1 << MMDC_MPWRDLHWCTL_HW_WR_DL_EN))
+#define MMDC_MPWRDLHWCTL_HW_WR_DL_ERR_MASK	((0xf << MMDC_MPWRDLHWCTL_HW_WR_DL_ERR))
+
+/* MPSWDAR */
+#define MMDC_MPSWDAR_TEST_DUMMY_EN_MASK	((0x1 << MMDC_MPSWDAR_TEST_DUMMY_EN))
+#define MMDC_MPSWDAR_SW_DUM_CMP3_MASK	((0x1 << MMDC_MPSWDAR_SW_DUM_CMP3))
+#define MMDC_MPSWDAR_SW_DUM_CMP2_MASK	((0x1 << MMDC_MPSWDAR_SW_DUM_CMP2))
+#define MMDC_MPSWDAR_SW_DUM_CMP1_MASK	((0x1 << MMDC_MPSWDAR_SW_DUM_CMP1))
+#define MMDC_MPSWDAR_SW_DUM_CMP0_MASK	((0x1 << MMDC_MPSWDAR_SW_DUM_CMP0))
+#define MMDC_MPSWDAR_SW_DUMMY_RD_MASK	((0x1 << MMDC_MPSWDAR_SW_DUMMY_RD))
+#define MMDC_MPSWDAR_SW_DUMMY_WR_MASK	((0x1 << MMDC_MPSWDAR_SW_DUMMY_WR))
+
+/* MADPCR0 */
+#define MMDC_MADPCR0_SBS_MASK		((0x1 << MMDC_MADPCR0_SBS))
+#define MMDC_MADPCR0_SBS_EN_MASK	((0x1 << MMDC_MADPCR0_SBS_EN))
+
+/* MASBS1 */
+#define MMDC_MASBS1_SBS_VLD_MASK	((0x1 << MMDC_MASBS1_SBS_VLD))
+#define MMDC_MASBS1_SBS_TYPE_MASK	((0x1 << MMDC_MASBS1_SBS_TYPE))
+
+/* MDREF */
+#define MMDC_MDREF_REF_CNT_MASK		((0xffff << MMDC_MDREF_REF_CNT))
+#define MMDC_MDREF_REF_SEL_MASK		((0x3    << MMDC_MDREF_REF_SEL))
+#define MMDC_MDREF_REFR_MASK		((0x7    << MMDC_MDREF_REFR))
+#define MMDC_MDREF_START_REF_MASK	((0x1    << MMDC_MDREF_START_REF))
+
+/* MPWLGCR */
+#define MMDC_MPWLGCR_HW_WL_EN_MASK	((0x1 << MMDC_MPWLGCR_HW_WL_EN))
+
+/* MPBC */
+#define MMDC_MPBC_BIST_DM_LP_EN_MASK	((0x1 << MMDC_MPBC_BIST_DM_LP_EN))
+#define MMDC_MPBC_BIST_CA0_LP_EN_MASK	((0x1 << MMDC_MPBC_BIST_CA0_LP_EN))
+#define MMDC_MPBC_BIST_DQ0_LP_EN_MASK	((0x1 << MMDC_MPBC_BIST_DQ0_LP_EN))
+#define MMDC_MPBC_BIST_DQ1_LP_EN_MASK	((0x1 << MMDC_MPBC_BIST_DQ1_LP_EN))
+#define MMDC_MPBC_BIST_DQ2_LP_EN_MASK	((0x1 << MMDC_MPBC_BIST_DQ2_LP_EN))
+#define MMDC_MPBC_BIST_DQ3_LP_EN_MASK	((0x1 << MMDC_MPBC_BIST_DQ3_LP_EN))
+#define MMDC_MPBC_BIST_DQ_LP_EN_MASK	((0xf << MMDC_MPBC_BIST_DQ0_LP_EN))
+
+/* MPMUR */
+#define MMDC_MPMUR_FRC_MSR_MASK		((0x1 << MMDC_MPMUR_FRC_MSR))
+
+/* MPODTCTRL */
+#define MMDC_MPODTCTRL_ODT_RD_ACT_EN_MASK	((0x1 << MMDC_MPODTCTRL_ODT_RD_ACT_EN))
+#define MMDC_MPODTCTRL_ODT_RD_PAS_EN_MASK	((0x1 << MMDC_MPODTCTRL_ODT_RD_PAS_EN))
+#define MMDC_MPODTCTRL_ODT_WR_ACT_EN_MASK	((0x1 << MMDC_MPODTCTRL_ODT_WR_ACT_EN))
+#define MMDC_MPODTCTRL_ODT_WR_PAS_EN_MASK	((0x1 << MMDC_MPODTCTRL_ODT_WR_PAS_EN))
+
+/* MAPSR */
+#define MMDC_MAPSR_DVACK_MASK		((0x1 << MMDC_MAPSR_DVACK))
+#define MMDC_MAPSR_LPACK_MASK		((0x1 << MMDC_MAPSR_LPACK))
+#define MMDC_MAPSR_DVFS_MASK		((0x1 << MMDC_MAPSR_DVFS))
+#define MMDC_MAPSR_LPMD_MASK		((0x1 << MMDC_MAPSR_LPMD))
+
+/* MAARCR */
+#define MMDC_MAARCR_ARCR_EXC_ERR_EN_MASK	((0x1 << MMDC_MAARCR_ARCR_EXC_ERR_EN))
+
+/* MPZQLP2CTL */
+#define MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQCS_MASK	((0x7f  << MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQCS))
+#define MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQCL_MASK	((0xff  << MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQCL))
+#define MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQINIT_MASK	((0x1ff << MMDC_MPZQLP2CTL_ZQ_LP2_HW_ZQINIT))
+
+/* MDCFG3LP */
+#define MMDC_MDCFG3LP_tRC_LP_MASK	((0x3f  << MMDC_MDCFG3LP_tRC_LP))
+#define MMDC_MDCFG3LP_tRCD_LP_MASK	((0xf   << MMDC_MDCFG3LP_tRCD_LP))
+#define MMDC_MDCFG3LP_tRPpb_LP_MASK	((0xf   << MMDC_MDCFG3LP_tRPpb_LP))
+#define MMDC_MDCFG3LP_tRPab_LP_MASK	((0xf   << MMDC_MDCFG3LP_tRPab_LP))
+
+/* MDOR */
+#define MMDC_MDOR_tXPR_MASK		((0xff  << MMDC_MDOR_tXPR))
+#define MMDC_MDOR_SDE_to_RST_MASK	((0x3f  << MMDC_MDOR_SDE_to_RST))
+#define MMDC_MDOR_RST_to_CKE_MASK	((0x3f  << MMDC_MDOR_RST_to_CKE))
+
+/* MDCFG0 */
+#define MMDC_MDCFG0_tRFC_MASK		((0xff  << MMDC_MDCFG0_tRFC))
+#define MMDC_MDCFG0_tXS_MASK		((0xff  << MMDC_MDCFG0_tXS))
+#define MMDC_MDCFG0_tXP_MASK		((0x7   << MMDC_MDCFG0_tXP))
+#define MMDC_MDCFG0_tXPDLL_MASK		((0xf   << MMDC_MDCFG0_tXPDLL))
+#define MMDC_MDCFG0_tFAW_MASK		((0x1f  << MMDC_MDCFG0_tFAW))
+#define MMDC_MDCFG0_tCL_MASK		((0xf   << MMDC_MDCFG0_tCL))
+
+/* MDCFG1 */
+#define MMDC_MDCFG1_tRCD_MASK		((0x7   << MMDC_MDCFG1_tRCD))
+#define MMDC_MDCFG1_tRP_MASK		((0x7   << MMDC_MDCFG1_tRP))
+#define MMDC_MDCFG1_tRC_MASK		((0x1f  << MMDC_MDCFG1_tRC))
+#define MMDC_MDCFG1_tRAS_MASK		((0x1f  << MMDC_MDCFG1_tRAS))
+#define MMDC_MDCFG1_tRPA_MASK		((0x1   << MMDC_MDCFG1_tRPA))
+#define MMDC_MDCFG1_tWR_MASK		((0x7   << MMDC_MDCFG1_tWR))
+#define MMDC_MDCFG1_tMRD_MASK		((0xf   << MMDC_MDCFG1_tMRD))
+#define MMDC_MDCFG1_tCWL_MASK		((0x7   << MMDC_MDCFG1_tCWL))
+
+/* MDCFG2 */
+#define MMDC_MDCFG2_tDLLK_MASK		((0x1ff << MMDC_MDCFG2_tDLLK))
+#define MMDC_MDCFG2_tRTP_MASK		((0x7   << MMDC_MDCFG2_tRTP))
+#define MMDC_MDCFG2_tWTR_MASK		((0x7   << MMDC_MDCFG2_tWTR))
+#define MMDC_MDCFG2_tRRD_MASK		((0x7   << MMDC_MDCFG2_tRRD))
+
+/* MDRWD */
+#define MMDC_MDRWD_tDAI_MASK		((0x1fff << MMDC_MDRWD_tDAI))
+#define MMDC_MDRWD_RTW_SAME_MASK	((0x7    << MMDC_MDRWD_RTW_SAME))
+#define MMDC_MDRWD_WTR_DIFF_MASK	((0x7    << MMDC_MDRWD_WTR_DIFF))
+#define MMDC_MDRWD_WTW_DIFF_MASK	((0x7    << MMDC_MDRWD_WTW_DIFF))
+#define MMDC_MDRWD_RTW_DIFF_MASK	((0x7    << MMDC_MDRWD_RTW_DIFF))
+#define MMDC_MDRWD_RTR_DIFF_MASK	((0x7    << MMDC_MDRWD_RTR_DIFF))
+
+/* MDPDC */
+#define MMDC_MDPDC_PRCT_1_MASK		((0x7    << MMDC_MDPDC_PRCT_1))
+#define MMDC_MDPDC_PRCT_0_MASK		((0x7    << MMDC_MDPDC_PRCT_0))
+#define MMDC_MDPDC_tCKE_MASK		((0x7    << MMDC_MDPDC_tCKE))
+#define MMDC_MDPDC_PWDT_1_MASK		((0xf    << MMDC_MDPDC_PWDT_1))
+#define MMDC_MDPDC_PWDT_0_MASK		((0xf    << MMDC_MDPDC_PWDT_0))
+#define MMDC_MDPDC_SLOW_PD_MASK		((0x1    << MMDC_MDPDC_SLOW_PD))
+#define MMDC_MDPDC_BOTH_CS_PD_MASK	((0x1    << MMDC_MDPDC_BOTH_CS_PD))
+#define MMDC_MDPDC_tCKSRX_MASK		((0x7    << MMDC_MDPDC_tCKSRX))
+#define MMDC_MDPDC_tCKSRE_MASK		((0x7    << MMDC_MDPDC_tCKSRE))
+
+/* MDASP */
+#define MMDC_MDASP_CS0_END_MASK		((0x7f << MMDC_MDASP_CS0_END))
+
+/* MAEXIDR0 */
+#define MMDC_MAEXIDR0_EXC_ID_MONITOR1_MASK	((0xffff << MMDC_MAEXIDR0_EXC_ID_MONITOR1))
+#define MMDC_MAEXIDR0_EXC_ID_MONITOR0_MASK	((0xffff << MMDC_MAEXIDR0_EXC_ID_MONITOR0))
+
+/* MAEXIDR1 */
+#define MMDC_MAEXIDR1_EXC_ID_MONITOR3_MASK	((0xffff << MMDC_MAEXIDR1_EXC_ID_MONITOR3))
+#define MMDC_MAEXIDR1_EXC_ID_MONITOR2_MASK	((0xffff << MMDC_MAEXIDR1_EXC_ID_MONITOR2))
+
+/* MPWRDLCTL */
+#define MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET3_MASK	((0x7f << MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET3))
+#define MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET2_MASK	((0x7f << MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET2))
+#define MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET1_MASK	((0x7f << MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET1))
+#define MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET0_MASK	((0x7f << MMDC_MPWRDLCTL_WR_DL_ABS_OFFSET0))
+
+/* MPRDDLCTL */
+#define MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET3_MASK	((0x7f << MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET3))
+#define MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET2_MASK	((0x7f << MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET2))
+#define MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET1_MASK	((0x7f << MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET1))
+#define MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET0_MASK	((0x7f << MMDC_MPRDDLCTL_RD_DL_ABS_OFFSET0))
+
+/* MPWRDQBY0DL */
+#define MMDC_MPWRDQBY0DL_WR_DM0_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DM0_DEL))
+#define MMDC_MPWRDQBY0DL_WR_DQ7_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DQ7_DEL))
+#define MMDC_MPWRDQBY0DL_WR_DQ6_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DQ6_DEL))
+#define MMDC_MPWRDQBY0DL_WR_DQ5_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DQ5_DEL))
+#define MMDC_MPWRDQBY0DL_WR_DQ4_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DQ4_DEL))
+#define MMDC_MPWRDQBY0DL_WR_DQ3_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DQ3_DEL))
+#define MMDC_MPWRDQBY0DL_WR_DQ2_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DQ2_DEL))
+#define MMDC_MPWRDQBY0DL_WR_DQ1_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DQ1_DEL))
+#define MMDC_MPWRDQBY0DL_WR_DQ0_DEL_MASK	((0x3f  << MMDC_MPWRDQBY0DL_WR_DQ0_DEL))
+
+/* MPWRDQBY1DL */
+#define MMDC_MPWRDQBY1DL_WR_DM1_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DM1_DEL))
+#define MMDC_MPWRDQBY1DL_WR_DQ15_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DQ15_DEL))
+#define MMDC_MPWRDQBY1DL_WR_DQ14_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DQ14_DEL))
+#define MMDC_MPWRDQBY1DL_WR_DQ13_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DQ13_DEL))
+#define MMDC_MPWRDQBY1DL_WR_DQ12_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DQ12_DEL))
+#define MMDC_MPWRDQBY1DL_WR_DQ11_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DQ11_DEL))
+#define MMDC_MPWRDQBY1DL_WR_DQ10_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DQ10_DEL))
+#define MMDC_MPWRDQBY1DL_WR_DQ9_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DQ9_DEL))
+#define MMDC_MPWRDQBY1DL_WR_DQ8_DEL_MASK	((0x3f  << MMDC_MPWRDQBY1DL_WR_DQ8_DEL))
+
+/* MPWRDQBY2DL */
+#define MMDC_MPWRDQBY2DL_WR_DM2_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DM2_DEL))
+#define MMDC_MPWRDQBY2DL_WR_DQ23_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DQ23_DEL))
+#define MMDC_MPWRDQBY2DL_WR_DQ22_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DQ22_DEL))
+#define MMDC_MPWRDQBY2DL_WR_DQ21_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DQ21_DEL))
+#define MMDC_MPWRDQBY2DL_WR_DQ20_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DQ20_DEL))
+#define MMDC_MPWRDQBY2DL_WR_DQ19_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DQ19_DEL))
+#define MMDC_MPWRDQBY2DL_WR_DQ18_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DQ18_DEL))
+#define MMDC_MPWRDQBY2DL_WR_DQ17_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DQ17_DEL))
+#define MMDC_MPWRDQBY2DL_WR_DQ16_DEL_MASK	((0x3f  << MMDC_MPWRDQBY2DL_WR_DQ16_DEL))
+
+/* MPWRDQBY3DL */
+#define MMDC_MPWRDQBY3DL_WR_DM3_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DM3_DEL))
+#define MMDC_MPWRDQBY3DL_WR_DQ31_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DQ31_DEL))
+#define MMDC_MPWRDQBY3DL_WR_DQ30_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DQ30_DEL))
+#define MMDC_MPWRDQBY3DL_WR_DQ29_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DQ29_DEL))
+#define MMDC_MPWRDQBY3DL_WR_DQ28_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DQ28_DEL))
+#define MMDC_MPWRDQBY3DL_WR_DQ27_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DQ27_DEL))
+#define MMDC_MPWRDQBY3DL_WR_DQ26_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DQ26_DEL))
+#define MMDC_MPWRDQBY3DL_WR_DQ25_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DQ25_DEL))
+#define MMDC_MPWRDQBY3DL_WR_DQ24_DEL_MASK	((0x3f  << MMDC_MPWRDQBY3DL_WR_DQ24_DEL))
+
+#define SNVS_LPCR_DPEN				(0x20)
+#define SNVS_LPCR_SRTC_ENV			(0x1)
+
+#define SRC_BASE_ADDR			CMC1_RBASE
+#define IRAM_BASE_ADDR			OCRAM_0_BASE
+#define IOMUXC_BASE_ADDR		IOMUXC1_RBASE
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+
+#include <asm/types.h>
+
+struct fuse_word {
+	u32	fuse;
+	u32	rsvd[3];
+};
+
+struct ocotp_regs {
+	u32	ctrl;
+	u32	ctrl_set;
+	u32	ctrl_clr;
+	u32	ctrl_tog;
+	u32	pdn;
+	u32	rsvd0[3];
+	u32	data;
+	u32	rsvd1[3];
+	u32	read_ctrl;
+	u32	rsvd2[3];
+	u32	read_fuse_data;
+	u32	rsvd3[3];
+	u32	sw_sticky;
+	u32	rsvd4[3];
+	u32	scs;
+	u32	scs_set;
+	u32	scs_clr;
+	u32	scs_tog;
+	u32	out_status;
+	u32	out_status_set;
+	u32	out_status_clr;
+	u32	out_status_tog;
+	u32	startword;
+	u32	rsvd5[3];
+	u32	version;
+	u32	rsvd6[19];
+	struct	fuse_word mem_repair[8];
+	u32	rsvd7[0xa8];
+
+	/* fuse banks */
+	struct fuse_bank {
+		u32	fuse_regs[0x20];
+	} bank[0];
+};
+
+struct fuse_bank1_regs {
+	u32	lock0;
+	u32	rsvd0[3];
+	u32	lock1;
+	u32	rsvd1[3];
+	u32	lock2;
+	u32	rsvd2[3];
+	u32	cfg0;
+	u32	rsvd3[3];
+	u32	cfg1;
+	u32	rsvd4[3];
+	u32	cfg2;
+	u32	rsvd5[3];
+	u32	cfg3;
+	u32	rsvd6[3];
+	u32	cfg4;
+	u32	rsvd7[3];
+};
+
+struct fuse_bank2_regs {
+	struct fuse_word boot[8];
+};
+
+struct fuse_bank3_regs {
+	u32	mem0;
+	u32	rsvd0[3];
+	u32	mem1;
+	u32	rsvd1[3];
+	u32	mem2;
+	u32	rsvd2[3];
+	u32	mem3;
+	u32	rsvd3[3];
+	u32	ana0;
+	u32	rsvd4[3];
+	u32	ana1;
+	u32	rsvd5[3];
+	u32	ana2;
+	u32	rsvd6[3];
+	u32	ana3;
+	u32	rsvd7[3];
+};
+
+struct fuse_bank7_regs {
+	u32	sjc_resp0;
+	u32	rsvd0[3];
+	u32	sjc_resp1;
+	u32	rsvd1[3];
+	u32	gp0;
+	u32	rsvd2[3];
+	u32	gp1;
+	u32	rsvd3[3];
+	u32	gp2;
+	u32	rsvd4[3];
+	u32	gp3;
+	u32	rsvd5[3];
+	u32	gp4;
+	u32	rsvd6[3];
+	u32	gp5;
+	u32	rsvd7[3];
+};
+
+struct usbphy_regs {
+	u32	usbphy_pwd;			/* 0x000 */
+	u32	usbphy_pwd_set;			/* 0x004 */
+	u32	usbphy_pwd_clr;			/* 0x008 */
+	u32	usbphy_pwd_tog;			/* 0x00c */
+	u32	usbphy_tx;			/* 0x010 */
+	u32	usbphy_tx_set;			/* 0x014 */
+	u32	usbphy_tx_clr;			/* 0x018 */
+	u32	usbphy_tx_tog;			/* 0x01c */
+	u32	usbphy_rx;			/* 0x020 */
+	u32	usbphy_rx_set;			/* 0x024 */
+	u32	usbphy_rx_clr;			/* 0x028 */
+	u32	usbphy_rx_tog;			/* 0x02c */
+	u32	usbphy_ctrl;			/* 0x030 */
+	u32	usbphy_ctrl_set;		/* 0x034 */
+	u32	usbphy_ctrl_clr;		/* 0x038 */
+	u32	usbphy_ctrl_tog;		/* 0x03c */
+	u32	usbphy_status;			/* 0x040 */
+	u32	reserved0[3];
+	u32	usbphy_debug0;			/* 0x050 */
+	u32	usbphy_debug0_set;		/* 0x054 */
+	u32	usbphy_debug0_clr;		/* 0x058 */
+	u32	usbphy_debug0_tog;		/* 0x05c */
+	u32	reserved1[4];
+	u32	usbphy_debug1;			/* 0x070 */
+	u32	usbphy_debug1_set;		/* 0x074 */
+	u32	usbphy_debug1_clr;		/* 0x078 */
+	u32	usbphy_debug1_tog;		/* 0x07c */
+	u32	usbphy_version;			/* 0x080 */
+	u32	reserved2[7];
+	u32	usb1_pll_480_ctrl;		/* 0x0a0 */
+	u32	usb1_pll_480_ctrl_set;		/* 0x0a4 */
+	u32	usb1_pll_480_ctrl_clr;		/* 0x0a8 */
+	u32	usb1_pll_480_ctrl_tog;		/* 0x0ac */
+	u32	reserved3[4];
+	u32	usb1_vbus_detect;		/* 0xc0 */
+	u32	usb1_vbus_detect_set;		/* 0xc4 */
+	u32	usb1_vbus_detect_clr;		/* 0xc8 */
+	u32	usb1_vbus_detect_tog;		/* 0xcc */
+	u32	usb1_vbus_det_stat;		/* 0xd0 */
+	u32	reserved4[3];
+	u32	usb1_chrg_detect;		/* 0xe0 */
+	u32	usb1_chrg_detect_set;		/* 0xe4 */
+	u32	usb1_chrg_detect_clr;		/* 0xe8 */
+	u32	usb1_chrg_detect_tog;		/* 0xec */
+	u32	usb1_chrg_det_stat;		/* 0xf0 */
+	u32	reserved5[3];
+	u32	usbphy_anactrl;			/* 0x100 */
+	u32	usbphy_anactrl_set;		/* 0x104 */
+	u32	usbphy_anactrl_clr;		/* 0x108 */
+	u32	usbphy_anactrl_tog;		/* 0x10c */
+	u32	usb1_loopback;			/* 0x110 */
+	u32	usb1_loopback_set;		/* 0x114 */
+	u32	usb1_loopback_clr;		/* 0x118 */
+	u32	usb1_loopback_tog;		/* 0x11c */
+	u32	usb1_loopback_hsfscnt;		/* 0x120 */
+	u32	usb1_loopback_hsfscnt_set;	/* 0x124 */
+	u32	usb1_loopback_hsfscnt_clr;	/* 0x128 */
+	u32	usb1_loopback_hsfscnt_tog;	/* 0x12c */
+	u32	usphy_trim_override_en;		/* 0x130 */
+	u32	usphy_trim_override_en_set;	/* 0x134 */
+	u32	usphy_trim_override_en_clr;	/* 0x138 */
+	u32	usphy_trim_override_en_tog;	/* 0x13c */
+	u32	usb1_pfda_ctrl1;		/* 0x140 */
+	u32	usb1_pfda_ctrl1_set;		/* 0x144 */
+	u32	usb1_pfda_ctrl1_clr;		/* 0x148 */
+	u32	usb1_pfda_ctrl1_tog;		/* 0x14c */
+};
+
+struct bootrom_sw_info {
+	u8 reserved_1;
+	u8 boot_dev_instance;
+	u8 boot_dev_type;
+	u8 reserved_2;
+	u32 core_freq;
+	u32 axi_freq;
+	u32 ddr_freq;
+	u32 rom_tick_freq;
+	u32 reserved_3[3];
+};
+
+#define	is_boot_from_usb(void)		(!(readl(USB_PHY0_BASE_ADDR) & (1<<20)))
+#define	disconnect_from_pc(void)	writel(0x0, USBOTG0_RBASE + 0x140)
+
+#endif
+
+#endif /* _MX7ULP_REGS_H_*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/iomux.h b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/iomux.h
new file mode 100644
index 000000000..f067c0206
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/iomux.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Based on Linux i.MX iomux-v3.h file:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MACH_IOMUX_H__
+#define __MACH_IOMUX_H__
+
+/*
+ *	build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ *
+ * IOMUX/PAD Bit field definitions
+ *
+ * MUX_CTRL_OFS:	                0..15 (16)
+ * SEL_INPUT_OFS:	               16..31 (16)
+ * MUX_MODE:	                   32..37  (6)
+ * SEL_INP:		                   38..41  (4)
+ * PAD_CTRL + NO_PAD_CTRL:         42..60 (19)
+ * reserved:		               61-63      (3)
+*/
+
+typedef u64 iomux_cfg_t;
+
+#define MUX_CTRL_OFS_SHIFT	     0
+#define MUX_CTRL_OFS_MASK	((iomux_cfg_t)0xffff << MUX_CTRL_OFS_SHIFT)
+#define MUX_SEL_INPUT_OFS_SHIFT	16
+#define MUX_SEL_INPUT_OFS_MASK	((iomux_cfg_t)0xffff << \
+	MUX_SEL_INPUT_OFS_SHIFT)
+
+#define MUX_MODE_SHIFT		32
+#define MUX_MODE_MASK		((iomux_cfg_t)0x3f << MUX_MODE_SHIFT)
+#define MUX_SEL_INPUT_SHIFT	38
+#define MUX_SEL_INPUT_MASK	((iomux_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
+#define MUX_PAD_CTRL_SHIFT	42
+#define MUX_PAD_CTRL_MASK	((iomux_cfg_t)0x7ffff << MUX_PAD_CTRL_SHIFT)
+
+#define MUX_PAD_CTRL(x)		((iomux_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+
+#define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs,	\
+		sel_input, pad_ctrl)					\
+	(((iomux_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT)     |	\
+	((iomux_cfg_t)(mux_mode)      << MUX_MODE_SHIFT)         |	\
+	((iomux_cfg_t)(pad_ctrl)      << MUX_PAD_CTRL_SHIFT)     |	\
+	((iomux_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)|	\
+	((iomux_cfg_t)(sel_input)     << MUX_SEL_INPUT_SHIFT))
+
+#define NEW_PAD_CTRL(cfg, pad)	(((cfg) & ~MUX_PAD_CTRL_MASK) | \
+					MUX_PAD_CTRL(pad))
+
+
+#define IOMUX_CONFIG_MPORTS       0x20
+#define MUX_MODE_MPORTS           ((iomux_v3_cfg_t)IOMUX_CONFIG_MPORTS << \
+				MUX_MODE_SHIFT)
+
+/* Bit definition below needs to be fixed acccording to ulp rm */
+
+#define NO_PAD_CTRL		     (1 << 18)
+#define PAD_CTL_OBE_ENABLE	 (1 << 17)
+#define PAD_CTL_IBE_ENABLE	 (1 << 16)
+#define PAD_CTL_DSE          (1 << 6)
+#define PAD_CTL_ODE          (1 << 5)
+#define PAD_CTL_SRE_FAST     (0 << 2)
+#define PAD_CTL_SRE_SLOW     (1 << 2)
+#define PAD_CTL_PUE          (1 << 1)
+#define PAD_CTL_PUS_UP       ((1 << 0) | PAD_CTL_PUE)
+#define PAD_CTL_PUS_DOWN     ((0 << 0) | PAD_CTL_PUE)
+
+
+void mx7ulp_iomux_setup_pad(iomux_cfg_t pad);
+void mx7ulp_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list,
+				      unsigned count);
+#endif	/* __MACH_IOMUX_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h
new file mode 100644
index 000000000..139b766c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h
@@ -0,0 +1,909 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_IMX7ULP_PINS_H__
+#define __ASM_ARCH_IMX7ULP_PINS_H__
+
+#include <asm/arch/iomux.h>
+
+enum {
+	MX7ULP_PAD_PTA0__CMP0_IN1_3V                                 = IOMUX_PAD(0xD000, 0xD000, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA0__PTA0                                        = IOMUX_PAD(0xD000, 0xD000, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA0__LPSPI0_PCS1                                 = IOMUX_PAD(0xD000, 0xD000, IOMUX_CONFIG_MPORTS | 0x3, 0xD104, 0x2, 0),
+	MX7ULP_PAD_PTA0__LPUART0_CTS_b                               = IOMUX_PAD(0xD000, 0xD000, IOMUX_CONFIG_MPORTS | 0x4, 0xD1F8, 0x2, 0),
+	MX7ULP_PAD_PTA0__LPI2C0_SCL                                  = IOMUX_PAD(0xD000, 0xD000, IOMUX_CONFIG_MPORTS | 0x5, 0xD17C, 0x2, 0),
+	MX7ULP_PAD_PTA0__TPM0_CLKIN                                  = IOMUX_PAD(0xD000, 0xD000, IOMUX_CONFIG_MPORTS | 0x6, 0xD1A8, 0x2, 0),
+	MX7ULP_PAD_PTA0__I2S0_RX_BCLK                                = IOMUX_PAD(0xD000, 0xD000, IOMUX_CONFIG_MPORTS | 0x7, 0xD1B8, 0x2, 0),
+	MX7ULP_PAD_PTA0__LLWU0_P0                                    = IOMUX_PAD(0xD000, 0xD000, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA1__CMP0_IN2_3V                                 = IOMUX_PAD(0xD004, 0xD004, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA1__PTA1                                        = IOMUX_PAD(0xD004, 0xD004, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA1__LPSPI0_PCS2                                 = IOMUX_PAD(0xD004, 0xD004, IOMUX_CONFIG_MPORTS | 0x3, 0xD108, 0x1, 0),
+	MX7ULP_PAD_PTA1__LPUART0_RTS_b                               = IOMUX_PAD(0xD004, 0xD004, IOMUX_CONFIG_MPORTS | 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA1__LPI2C0_SDA                                  = IOMUX_PAD(0xD004, 0xD004, IOMUX_CONFIG_MPORTS | 0x5, 0xD180, 0x1, 0),
+	MX7ULP_PAD_PTA1__TPM0_CH0                                    = IOMUX_PAD(0xD004, 0xD004, IOMUX_CONFIG_MPORTS | 0x6, 0xD138, 0x1, 0),
+	MX7ULP_PAD_PTA1__I2S0_RX_FS                                  = IOMUX_PAD(0xD004, 0xD004, IOMUX_CONFIG_MPORTS | 0x7, 0xD1BC, 0x1, 0),
+	MX7ULP_PAD_PTA2__CMP1_IN2_3V                                 = IOMUX_PAD(0xD008, 0xD008, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA2__PTA2                                        = IOMUX_PAD(0xD008, 0xD008, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA2__LPSPI0_PCS3                                 = IOMUX_PAD(0xD008, 0xD008, IOMUX_CONFIG_MPORTS | 0x3, 0xD10C, 0x1, 0),
+	MX7ULP_PAD_PTA2__LPUART0_TX                                  = IOMUX_PAD(0xD008, 0xD008, IOMUX_CONFIG_MPORTS | 0x4, 0xD200, 0x1, 0),
+	MX7ULP_PAD_PTA2__LPI2C0_HREQ                                 = IOMUX_PAD(0xD008, 0xD008, IOMUX_CONFIG_MPORTS | 0x5, 0xD178, 0x1, 0),
+	MX7ULP_PAD_PTA2__TPM0_CH1                                    = IOMUX_PAD(0xD008, 0xD008, IOMUX_CONFIG_MPORTS | 0x6, 0xD13C, 0x1, 0),
+	MX7ULP_PAD_PTA2__I2S0_RXD0                                   = IOMUX_PAD(0xD008, 0xD008, IOMUX_CONFIG_MPORTS | 0x7, 0xD1DC, 0x1, 0),
+	MX7ULP_PAD_PTA3__CMP1_IN4_3V                                 = IOMUX_PAD(0xD00C, 0xD00C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA3__PTA3                                        = IOMUX_PAD(0xD00C, 0xD00C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA3__LPSPI0_PCS0                                 = IOMUX_PAD(0xD00C, 0xD00C, IOMUX_CONFIG_MPORTS | 0x3, 0xD100, 0x1, 0),
+	MX7ULP_PAD_PTA3__LPUART0_RX                                  = IOMUX_PAD(0xD00C, 0xD00C, IOMUX_CONFIG_MPORTS | 0x4, 0xD1FC, 0x1, 0),
+	MX7ULP_PAD_PTA3__TPM0_CH2                                    = IOMUX_PAD(0xD00C, 0xD00C, IOMUX_CONFIG_MPORTS | 0x6, 0xD140, 0x1, 0),
+	MX7ULP_PAD_PTA3__I2S0_RXD1                                   = IOMUX_PAD(0xD00C, 0xD00C, IOMUX_CONFIG_MPORTS | 0x7, 0xD1E0, 0x1, 0),
+	MX7ULP_PAD_PTA3__CMP0_OUT                                    = IOMUX_PAD(0xD00C, 0xD00C, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA3__LLWU0_P1                                    = IOMUX_PAD(0xD00C, 0xD00C, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA4__ADC1_CH3A                                   = IOMUX_PAD(0xD010, 0xD010, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA4__PTA4                                        = IOMUX_PAD(0xD010, 0xD010, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA4__LPSPI0_SIN                                  = IOMUX_PAD(0xD010, 0xD010, IOMUX_CONFIG_MPORTS | 0x3, 0xD114, 0x1, 0),
+	MX7ULP_PAD_PTA4__LPUART1_CTS_b                               = IOMUX_PAD(0xD010, 0xD010, IOMUX_CONFIG_MPORTS | 0x4, 0xD204, 0x1, 0),
+	MX7ULP_PAD_PTA4__LPI2C1_SCL                                  = IOMUX_PAD(0xD010, 0xD010, IOMUX_CONFIG_MPORTS | 0x5, 0xD188, 0x1, 0),
+	MX7ULP_PAD_PTA4__TPM0_CH3                                    = IOMUX_PAD(0xD010, 0xD010, IOMUX_CONFIG_MPORTS | 0x6, 0xD144, 0x1, 0),
+	MX7ULP_PAD_PTA4__I2S0_MCLK                                   = IOMUX_PAD(0xD010, 0xD010, IOMUX_CONFIG_MPORTS | 0x7, 0xD1B4, 0x1, 0),
+	MX7ULP_PAD_PTA5__ADC1_CH3B                                   = IOMUX_PAD(0xD014, 0xD014, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA5__PTA5                                        = IOMUX_PAD(0xD014, 0xD014, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA5__LPSPI0_SOUT                                 = IOMUX_PAD(0xD014, 0xD014, IOMUX_CONFIG_MPORTS | 0x3, 0xD118, 0x1, 0),
+	MX7ULP_PAD_PTA5__LPUART1_RTS_b                               = IOMUX_PAD(0xD014, 0xD014, IOMUX_CONFIG_MPORTS | 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA5__LPI2C1_SDA                                  = IOMUX_PAD(0xD014, 0xD014, IOMUX_CONFIG_MPORTS | 0x5, 0xD18C, 0x1, 0),
+	MX7ULP_PAD_PTA5__TPM0_CH4                                    = IOMUX_PAD(0xD014, 0xD014, IOMUX_CONFIG_MPORTS | 0x6, 0xD148, 0x1, 0),
+	MX7ULP_PAD_PTA5__I2S0_TX_BCLK                                = IOMUX_PAD(0xD014, 0xD014, IOMUX_CONFIG_MPORTS | 0x7, 0xD1C0, 0x1, 0),
+	MX7ULP_PAD_PTA6__ADC1_CH4A_5A_6A_7A_8A                       = IOMUX_PAD(0xD018, 0xD018, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA6__PTA6                                        = IOMUX_PAD(0xD018, 0xD018, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA6__LPSPI0_SCK                                  = IOMUX_PAD(0xD018, 0xD018, IOMUX_CONFIG_MPORTS | 0x3, 0xD110, 0x1, 0),
+	MX7ULP_PAD_PTA6__LPUART1_TX                                  = IOMUX_PAD(0xD018, 0xD018, IOMUX_CONFIG_MPORTS | 0x4, 0xD20C, 0x1, 0),
+	MX7ULP_PAD_PTA6__LPI2C1_HREQ                                 = IOMUX_PAD(0xD018, 0xD018, IOMUX_CONFIG_MPORTS | 0x5, 0xD184, 0x1, 0),
+	MX7ULP_PAD_PTA6__TPM0_CH5                                    = IOMUX_PAD(0xD018, 0xD018, IOMUX_CONFIG_MPORTS | 0x6, 0xD14C, 0x1, 0),
+	MX7ULP_PAD_PTA6__I2S0_TX_FS                                  = IOMUX_PAD(0xD018, 0xD018, IOMUX_CONFIG_MPORTS | 0x7, 0xD1C4, 0x1, 0),
+	MX7ULP_PAD_PTA7__ADC1_CH4B_5B_6B_7B_8B                       = IOMUX_PAD(0xD01C, 0xD01C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA7__PTA7                                        = IOMUX_PAD(0xD01C, 0xD01C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA7__LPUART1_RX                                  = IOMUX_PAD(0xD01C, 0xD01C, IOMUX_CONFIG_MPORTS | 0x4, 0xD208, 0x1, 0),
+	MX7ULP_PAD_PTA7__TPM1_CH1                                    = IOMUX_PAD(0xD01C, 0xD01C, IOMUX_CONFIG_MPORTS | 0x6, 0xD154, 0x1, 0),
+	MX7ULP_PAD_PTA7__I2S0_TXD0                                   = IOMUX_PAD(0xD01C, 0xD01C, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA8__ADC1_CH4A_5A_6A_7A_8A                       = IOMUX_PAD(0xD020, 0xD020, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA8__PTA8                                        = IOMUX_PAD(0xD020, 0xD020, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA8__LPSPI1_PCS1                                 = IOMUX_PAD(0xD020, 0xD020, IOMUX_CONFIG_MPORTS | 0x3, 0xD120, 0x1, 0),
+	MX7ULP_PAD_PTA8__LPUART2_CTS_b                               = IOMUX_PAD(0xD020, 0xD020, IOMUX_CONFIG_MPORTS | 0x4, 0xD210, 0x1, 0),
+	MX7ULP_PAD_PTA8__LPI2C2_SCL                                  = IOMUX_PAD(0xD020, 0xD020, IOMUX_CONFIG_MPORTS | 0x5, 0xD194, 0x1, 0),
+	MX7ULP_PAD_PTA8__TPM1_CLKIN                                  = IOMUX_PAD(0xD020, 0xD020, IOMUX_CONFIG_MPORTS | 0x6, 0xD1AC, 0x1, 0),
+	MX7ULP_PAD_PTA8__I2S0_TXD1                                   = IOMUX_PAD(0xD020, 0xD020, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA9__ADC1_CH4B_5B_6B_7B_8B                       = IOMUX_PAD(0xD024, 0xD024, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA9__PTA9                                        = IOMUX_PAD(0xD024, 0xD024, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA9__LPSPI1_PCS2                                 = IOMUX_PAD(0xD024, 0xD024, IOMUX_CONFIG_MPORTS | 0x3, 0xD124, 0x1, 0),
+	MX7ULP_PAD_PTA9__LPUART2_RTS_b                               = IOMUX_PAD(0xD024, 0xD024, IOMUX_CONFIG_MPORTS | 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA9__LPI2C2_SDA                                  = IOMUX_PAD(0xD024, 0xD024, IOMUX_CONFIG_MPORTS | 0x5, 0xD198, 0x1, 0),
+	MX7ULP_PAD_PTA9__TPM1_CH0                                    = IOMUX_PAD(0xD024, 0xD024, IOMUX_CONFIG_MPORTS | 0x6, 0xD150, 0x1, 0),
+	MX7ULP_PAD_PTA9__NMI0_b                                      = IOMUX_PAD(0xD024, 0xD024, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA10__ADC1_CH4A_5A_6A_7A_8A                      = IOMUX_PAD(0xD028, 0xD028, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA10__PTA10                                      = IOMUX_PAD(0xD028, 0xD028, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA10__LPSPI1_PCS3                                = IOMUX_PAD(0xD028, 0xD028, IOMUX_CONFIG_MPORTS | 0x3, 0xD128, 0x1, 0),
+	MX7ULP_PAD_PTA10__LPUART2_TX                                 = IOMUX_PAD(0xD028, 0xD028, IOMUX_CONFIG_MPORTS | 0x4, 0xD218, 0x1, 0),
+	MX7ULP_PAD_PTA10__LPI2C2_HREQ                                = IOMUX_PAD(0xD028, 0xD028, IOMUX_CONFIG_MPORTS | 0x5, 0xD190, 0x1, 0),
+	MX7ULP_PAD_PTA10__TPM2_CLKIN                                 = IOMUX_PAD(0xD028, 0xD028, IOMUX_CONFIG_MPORTS | 0x6, 0xD1F4, 0x1, 0),
+	MX7ULP_PAD_PTA10__I2S0_RX_BCLK                               = IOMUX_PAD(0xD028, 0xD028, IOMUX_CONFIG_MPORTS | 0x7, 0xD1B8, 0x1, 0),
+	MX7ULP_PAD_PTA11__ADC1_CH4B_5B_6B_7B_8B                      = IOMUX_PAD(0xD02C, 0xD02C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA11__PTA11                                      = IOMUX_PAD(0xD02C, 0xD02C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA11__LPUART2_RX                                 = IOMUX_PAD(0xD02C, 0xD02C, IOMUX_CONFIG_MPORTS | 0x4, 0xD214, 0x1, 0),
+	MX7ULP_PAD_PTA11__TPM2_CH0                                   = IOMUX_PAD(0xD02C, 0xD02C, IOMUX_CONFIG_MPORTS | 0x6, 0xD158, 0x1, 0),
+	MX7ULP_PAD_PTA11__I2S0_RX_FS                                 = IOMUX_PAD(0xD02C, 0xD02C, IOMUX_CONFIG_MPORTS | 0x7, 0xD1BC, 0x2, 0),
+	MX7ULP_PAD_PTA12__ADC1_CH4A_5A_6A_7A_8A                      = IOMUX_PAD(0xD030, 0xD030, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA12__PTA12                                      = IOMUX_PAD(0xD030, 0xD030, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA12__LPSPI1_SIN                                 = IOMUX_PAD(0xD030, 0xD030, IOMUX_CONFIG_MPORTS | 0x3, 0xD130, 0x1, 0),
+	MX7ULP_PAD_PTA12__LPUART3_CTS_b                              = IOMUX_PAD(0xD030, 0xD030, IOMUX_CONFIG_MPORTS | 0x4, 0xD21C, 0x1, 0),
+	MX7ULP_PAD_PTA12__LPI2C3_SCL                                 = IOMUX_PAD(0xD030, 0xD030, IOMUX_CONFIG_MPORTS | 0x5, 0xD1A0, 0x1, 0),
+	MX7ULP_PAD_PTA12__TPM2_CH1                                   = IOMUX_PAD(0xD030, 0xD030, IOMUX_CONFIG_MPORTS | 0x6, 0xD15C, 0x1, 0),
+	MX7ULP_PAD_PTA12__I2S0_RXD0                                  = IOMUX_PAD(0xD030, 0xD030, IOMUX_CONFIG_MPORTS | 0x7, 0xD1DC, 0x2, 0),
+	MX7ULP_PAD_PTA13__ADC1_CH4B_5B_6B_7B_8B                      = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA13__PTA13                                      = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA13__LPSPI1_SOUT                                = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0x3, 0xD134, 0x2, 0),
+	MX7ULP_PAD_PTA13__LPUART3_RTS_b                              = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA13__LPI2C3_SDA                                 = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0x5, 0xD1A4, 0x2, 0),
+	MX7ULP_PAD_PTA13__TPM3_CLKIN                                 = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0x6, 0xD1B0, 0x1, 0),
+	MX7ULP_PAD_PTA13__I2S0_RXD1                                  = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0x7, 0xD1E0, 0x2, 0),
+	MX7ULP_PAD_PTA13__CMP0_OUT                                   = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA13__LLWU0_P2                                   = IOMUX_PAD(0xD034, 0xD034, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA14__ADC1_CH4A_5A_6A_7A_8A                      = IOMUX_PAD(0xD038, 0xD038, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA14__PTA14                                      = IOMUX_PAD(0xD038, 0xD038, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA14__LPSPI1_SCK                                 = IOMUX_PAD(0xD038, 0xD038, IOMUX_CONFIG_MPORTS | 0x3, 0xD12C, 0x2, 0),
+	MX7ULP_PAD_PTA14__LPUART3_TX                                 = IOMUX_PAD(0xD038, 0xD038, IOMUX_CONFIG_MPORTS | 0x4, 0xD224, 0x2, 0),
+	MX7ULP_PAD_PTA14__LPI2C3_HREQ                                = IOMUX_PAD(0xD038, 0xD038, IOMUX_CONFIG_MPORTS | 0x5, 0xD19C, 0x2, 0),
+	MX7ULP_PAD_PTA14__TPM3_CH0                                   = IOMUX_PAD(0xD038, 0xD038, IOMUX_CONFIG_MPORTS | 0x6, 0xD160, 0x1, 0),
+	MX7ULP_PAD_PTA14__I2S0_MCLK                                  = IOMUX_PAD(0xD038, 0xD038, IOMUX_CONFIG_MPORTS | 0x7, 0xD1B4, 0x2, 0),
+	MX7ULP_PAD_PTA14__LLWU0_P3                                   = IOMUX_PAD(0xD038, 0xD038, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA15__ADC1_CH4B_5B_6B_7B_8B                      = IOMUX_PAD(0xD03C, 0xD03C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA15__PTA15                                      = IOMUX_PAD(0xD03C, 0xD03C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA15__LPSPI1_PCS0                                = IOMUX_PAD(0xD03C, 0xD03C, IOMUX_CONFIG_MPORTS | 0x3, 0xD11C, 0x1, 0),
+	MX7ULP_PAD_PTA15__LPUART3_RX                                 = IOMUX_PAD(0xD03C, 0xD03C, IOMUX_CONFIG_MPORTS | 0x4, 0xD220, 0x1, 0),
+	MX7ULP_PAD_PTA15__TPM3_CH1                                   = IOMUX_PAD(0xD03C, 0xD03C, IOMUX_CONFIG_MPORTS | 0x6, 0xD164, 0x1, 0),
+	MX7ULP_PAD_PTA15__I2S0_TX_BCLK                               = IOMUX_PAD(0xD03C, 0xD03C, IOMUX_CONFIG_MPORTS | 0x7, 0xD1C0, 0x2, 0),
+	MX7ULP_PAD_PTA16__CMP1_IN5_3V                                = IOMUX_PAD(0xD040, 0xD040, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA16__PTA16                                      = IOMUX_PAD(0xD040, 0xD040, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA16__FXIO0_D0                                   = IOMUX_PAD(0xD040, 0xD040, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA16__LPSPI0_SOUT                                = IOMUX_PAD(0xD040, 0xD040, IOMUX_CONFIG_MPORTS | 0x3, 0xD118, 0x2, 0),
+	MX7ULP_PAD_PTA16__LPUART0_CTS_b                              = IOMUX_PAD(0xD040, 0xD040, IOMUX_CONFIG_MPORTS | 0x4, 0xD1F8, 0x1, 0),
+	MX7ULP_PAD_PTA16__LPI2C0_SCL                                 = IOMUX_PAD(0xD040, 0xD040, IOMUX_CONFIG_MPORTS | 0x5, 0xD17C, 0x1, 0),
+	MX7ULP_PAD_PTA16__TPM3_CH2                                   = IOMUX_PAD(0xD040, 0xD040, IOMUX_CONFIG_MPORTS | 0x6, 0xD168, 0x1, 0),
+	MX7ULP_PAD_PTA16__I2S0_TX_FS                                 = IOMUX_PAD(0xD040, 0xD040, IOMUX_CONFIG_MPORTS | 0x7, 0xD1C4, 0x2, 0),
+	MX7ULP_PAD_PTA17__CMP1_IN6_3V                                = IOMUX_PAD(0xD044, 0xD044, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA17__PTA17                                      = IOMUX_PAD(0xD044, 0xD044, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA17__FXIO0_D1                                   = IOMUX_PAD(0xD044, 0xD044, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA17__LPSPI0_SCK                                 = IOMUX_PAD(0xD044, 0xD044, IOMUX_CONFIG_MPORTS | 0x3, 0xD110, 0x2, 0),
+	MX7ULP_PAD_PTA17__LPUART0_RTS_b                              = IOMUX_PAD(0xD044, 0xD044, IOMUX_CONFIG_MPORTS | 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA17__LPI2C0_SDA                                 = IOMUX_PAD(0xD044, 0xD044, IOMUX_CONFIG_MPORTS | 0x5, 0xD180, 0x2, 0),
+	MX7ULP_PAD_PTA17__TPM3_CH3                                   = IOMUX_PAD(0xD044, 0xD044, IOMUX_CONFIG_MPORTS | 0x6, 0xD16C, 0x1, 0),
+	MX7ULP_PAD_PTA17__I2S0_TXD0                                  = IOMUX_PAD(0xD044, 0xD044, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA18__CMP1_IN1_3V                                = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA18__PTA18                                      = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA18__FXIO0_D2                                   = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA18__LPSPI0_PCS0                                = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0x3, 0xD100, 0x2, 0),
+	MX7ULP_PAD_PTA18__LPUART0_TX                                 = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0x4, 0xD200, 0x2, 0),
+	MX7ULP_PAD_PTA18__LPI2C0_HREQ                                = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0x5, 0xD178, 0x2, 0),
+	MX7ULP_PAD_PTA18__TPM3_CH4                                   = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0x6, 0xD170, 0x1, 0),
+	MX7ULP_PAD_PTA18__I2S0_TXD1                                  = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA18__LLWU0_P4                                   = IOMUX_PAD(0xD048, 0xD048, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA19__CMP1_IN3_3V                                = IOMUX_PAD(0xD04C, 0xD04C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA19__PTA19                                      = IOMUX_PAD(0xD04C, 0xD04C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA19__FXIO0_D3                                   = IOMUX_PAD(0xD04C, 0xD04C, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA19__LPUART0_RX                                 = IOMUX_PAD(0xD04C, 0xD04C, IOMUX_CONFIG_MPORTS | 0x4, 0xD1FC, 0x2, 0),
+	MX7ULP_PAD_PTA19__TPM3_CH5                                   = IOMUX_PAD(0xD04C, 0xD04C, IOMUX_CONFIG_MPORTS | 0x6, 0xD174, 0x1, 0),
+	MX7ULP_PAD_PTA19__I2S1_RX_BCLK                               = IOMUX_PAD(0xD04C, 0xD04C, IOMUX_CONFIG_MPORTS | 0x7, 0xD1CC, 0x1, 0),
+	MX7ULP_PAD_PTA19__LPTMR0_ALT3                                = IOMUX_PAD(0xD04C, 0xD04C, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA19__LLWU0_P5                                   = IOMUX_PAD(0xD04C, 0xD04C, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA20__ADC0_CH8A_9A_10A                           = IOMUX_PAD(0xD050, 0xD050, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA20__PTA20                                      = IOMUX_PAD(0xD050, 0xD050, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA20__FXIO0_D4                                   = IOMUX_PAD(0xD050, 0xD050, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA20__LPSPI0_SIN                                 = IOMUX_PAD(0xD050, 0xD050, IOMUX_CONFIG_MPORTS | 0x3, 0xD114, 0x2, 0),
+	MX7ULP_PAD_PTA20__LPUART1_CTS_b                              = IOMUX_PAD(0xD050, 0xD050, IOMUX_CONFIG_MPORTS | 0x4, 0xD204, 0x2, 0),
+	MX7ULP_PAD_PTA20__LPI2C1_SCL                                 = IOMUX_PAD(0xD050, 0xD050, IOMUX_CONFIG_MPORTS | 0x5, 0xD188, 0x2, 0),
+	MX7ULP_PAD_PTA20__TPM0_CLKIN                                 = IOMUX_PAD(0xD050, 0xD050, IOMUX_CONFIG_MPORTS | 0x6, 0xD1A8, 0x1, 0),
+	MX7ULP_PAD_PTA20__I2S1_RX_FS                                 = IOMUX_PAD(0xD050, 0xD050, IOMUX_CONFIG_MPORTS | 0x7, 0xD1D0, 0x1, 0),
+	MX7ULP_PAD_PTA21__ADC0_CH8B_9B_10B                           = IOMUX_PAD(0xD054, 0xD054, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA21__PTA21                                      = IOMUX_PAD(0xD054, 0xD054, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA21__FXIO0_D5                                   = IOMUX_PAD(0xD054, 0xD054, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA21__LPSPI0_PCS1                                = IOMUX_PAD(0xD054, 0xD054, IOMUX_CONFIG_MPORTS | 0x3, 0xD104, 0x1, 0),
+	MX7ULP_PAD_PTA21__LPUART1_RTS_b                              = IOMUX_PAD(0xD054, 0xD054, IOMUX_CONFIG_MPORTS | 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA21__LPI2C1_SDA                                 = IOMUX_PAD(0xD054, 0xD054, IOMUX_CONFIG_MPORTS | 0x5, 0xD18C, 0x2, 0),
+	MX7ULP_PAD_PTA21__TPM0_CH0                                   = IOMUX_PAD(0xD054, 0xD054, IOMUX_CONFIG_MPORTS | 0x6, 0xD138, 0x2, 0),
+	MX7ULP_PAD_PTA21__I2S1_RXD0                                  = IOMUX_PAD(0xD054, 0xD054, IOMUX_CONFIG_MPORTS | 0x7, 0xD1E4, 0x1, 0),
+	MX7ULP_PAD_PTA22__ADC0_CH8A_9A_10A                           = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA22__PTA22                                      = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA22__FXIO0_D6                                   = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA22__LPSPI0_PCS2                                = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0x3, 0xD108, 0x2, 0),
+	MX7ULP_PAD_PTA22__LPUART1_TX                                 = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0x4, 0xD20C, 0x2, 0),
+	MX7ULP_PAD_PTA22__LPI2C1_HREQ                                = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0x5, 0xD184, 0x2, 0),
+	MX7ULP_PAD_PTA22__TPM0_CH1                                   = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0x6, 0xD13C, 0x2, 0),
+	MX7ULP_PAD_PTA22__I2S1_RXD1                                  = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0x7, 0xD1E8, 0x1, 0),
+	MX7ULP_PAD_PTA22__LPTMR0_ALT2                                = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA22__EWM_OUT_b                                  = IOMUX_PAD(0xD058, 0xD058, IOMUX_CONFIG_MPORTS | 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA23__ADC0_CH8B_9B_10B                           = IOMUX_PAD(0xD05C, 0xD05C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA23__PTA23                                      = IOMUX_PAD(0xD05C, 0xD05C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA23__FXIO0_D7                                   = IOMUX_PAD(0xD05C, 0xD05C, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA23__LPSPI0_PCS3                                = IOMUX_PAD(0xD05C, 0xD05C, IOMUX_CONFIG_MPORTS | 0x3, 0xD10C, 0x2, 0),
+	MX7ULP_PAD_PTA23__LPUART1_RX                                 = IOMUX_PAD(0xD05C, 0xD05C, IOMUX_CONFIG_MPORTS | 0x4, 0xD208, 0x2, 0),
+	MX7ULP_PAD_PTA23__TPM0_CH2                                   = IOMUX_PAD(0xD05C, 0xD05C, IOMUX_CONFIG_MPORTS | 0x6, 0xD140, 0x2, 0),
+	MX7ULP_PAD_PTA23__I2S1_MCLK                                  = IOMUX_PAD(0xD05C, 0xD05C, IOMUX_CONFIG_MPORTS | 0x7, 0xD1C8, 0x1, 0),
+	MX7ULP_PAD_PTA23__LLWU0_P6                                   = IOMUX_PAD(0xD05C, 0xD05C, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA24__ADC0_CH8A_9A_10A                           = IOMUX_PAD(0xD060, 0xD060, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA24__PTA24                                      = IOMUX_PAD(0xD060, 0xD060, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA24__FXIO0_D8                                   = IOMUX_PAD(0xD060, 0xD060, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA24__LPSPI1_PCS1                                = IOMUX_PAD(0xD060, 0xD060, IOMUX_CONFIG_MPORTS | 0x3, 0xD120, 0x2, 0),
+	MX7ULP_PAD_PTA24__LPUART2_CTS_b                              = IOMUX_PAD(0xD060, 0xD060, IOMUX_CONFIG_MPORTS | 0x4, 0xD210, 0x2, 0),
+	MX7ULP_PAD_PTA24__LPI2C2_SCL                                 = IOMUX_PAD(0xD060, 0xD060, IOMUX_CONFIG_MPORTS | 0x5, 0xD194, 0x2, 0),
+	MX7ULP_PAD_PTA24__TPM0_CH3                                   = IOMUX_PAD(0xD060, 0xD060, IOMUX_CONFIG_MPORTS | 0x6, 0xD144, 0x2, 0),
+	MX7ULP_PAD_PTA24__I2S1_TX_BCLK                               = IOMUX_PAD(0xD060, 0xD060, IOMUX_CONFIG_MPORTS | 0x7, 0xD1D4, 0x1, 0),
+	MX7ULP_PAD_PTA25__ADC0_CH8B_9B_10B                           = IOMUX_PAD(0xD064, 0xD064, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA25__PTA25                                      = IOMUX_PAD(0xD064, 0xD064, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA25__FXIO0_D9                                   = IOMUX_PAD(0xD064, 0xD064, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA25__LPSPI1_PCS2                                = IOMUX_PAD(0xD064, 0xD064, IOMUX_CONFIG_MPORTS | 0x3, 0xD124, 0x2, 0),
+	MX7ULP_PAD_PTA25__LPUART2_RTS_b                              = IOMUX_PAD(0xD064, 0xD064, IOMUX_CONFIG_MPORTS | 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA25__LPI2C2_SDA                                 = IOMUX_PAD(0xD064, 0xD064, IOMUX_CONFIG_MPORTS | 0x5, 0xD198, 0x2, 0),
+	MX7ULP_PAD_PTA25__TPM0_CH4                                   = IOMUX_PAD(0xD064, 0xD064, IOMUX_CONFIG_MPORTS | 0x6, 0xD148, 0x2, 0),
+	MX7ULP_PAD_PTA25__I2S1_TX_FS                                 = IOMUX_PAD(0xD064, 0xD064, IOMUX_CONFIG_MPORTS | 0x7, 0xD1D8, 0x1, 0),
+	MX7ULP_PAD_PTA26__PTA26                                      = IOMUX_PAD(0xD068, 0xD068, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA26__JTAG_TMS_SWD_DIO                           = IOMUX_PAD(0xD068, 0xD068, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA26__FXIO0_D10                                  = IOMUX_PAD(0xD068, 0xD068, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA26__LPSPI1_PCS3                                = IOMUX_PAD(0xD068, 0xD068, IOMUX_CONFIG_MPORTS | 0x3, 0xD128, 0x2, 0),
+	MX7ULP_PAD_PTA26__LPUART2_TX                                 = IOMUX_PAD(0xD068, 0xD068, IOMUX_CONFIG_MPORTS | 0x4, 0xD218, 0x2, 0),
+	MX7ULP_PAD_PTA26__LPI2C2_HREQ                                = IOMUX_PAD(0xD068, 0xD068, IOMUX_CONFIG_MPORTS | 0x5, 0xD190, 0x2, 0),
+	MX7ULP_PAD_PTA26__TPM0_CH5                                   = IOMUX_PAD(0xD068, 0xD068, IOMUX_CONFIG_MPORTS | 0x6, 0xD14C, 0x2, 0),
+	MX7ULP_PAD_PTA26__I2S1_RXD2                                  = IOMUX_PAD(0xD068, 0xD068, IOMUX_CONFIG_MPORTS | 0x7, 0xD1EC, 0x1, 0),
+	MX7ULP_PAD_PTA27__PTA27                                      = IOMUX_PAD(0xD06C, 0xD06C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA27__JTAG_TDO                                   = IOMUX_PAD(0xD06C, 0xD06C, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA27__FXIO0_D11                                  = IOMUX_PAD(0xD06C, 0xD06C, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA27__LPUART2_RX                                 = IOMUX_PAD(0xD06C, 0xD06C, IOMUX_CONFIG_MPORTS | 0x4, 0xD214, 0x2, 0),
+	MX7ULP_PAD_PTA27__TPM1_CH1                                   = IOMUX_PAD(0xD06C, 0xD06C, IOMUX_CONFIG_MPORTS | 0x6, 0xD154, 0x2, 0),
+	MX7ULP_PAD_PTA27__I2S1_RXD3                                  = IOMUX_PAD(0xD06C, 0xD06C, IOMUX_CONFIG_MPORTS | 0x7, 0xD1F0, 0x1, 0),
+	MX7ULP_PAD_PTA28__PTA28                                      = IOMUX_PAD(0xD070, 0xD070, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA28__JTAG_TDI                                   = IOMUX_PAD(0xD070, 0xD070, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA28__FXIO0_D12                                  = IOMUX_PAD(0xD070, 0xD070, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA28__LPSPI1_SIN                                 = IOMUX_PAD(0xD070, 0xD070, IOMUX_CONFIG_MPORTS | 0x3, 0xD130, 0x2, 0),
+	MX7ULP_PAD_PTA28__LPUART3_CTS_b                              = IOMUX_PAD(0xD070, 0xD070, IOMUX_CONFIG_MPORTS | 0x4, 0xD21C, 0x2, 0),
+	MX7ULP_PAD_PTA28__LPI2C3_SCL                                 = IOMUX_PAD(0xD070, 0xD070, IOMUX_CONFIG_MPORTS | 0x5, 0xD1A0, 0x2, 0),
+	MX7ULP_PAD_PTA28__TPM1_CLKIN                                 = IOMUX_PAD(0xD070, 0xD070, IOMUX_CONFIG_MPORTS | 0x6, 0xD1AC, 0x2, 0),
+	MX7ULP_PAD_PTA28__I2S1_TXD2                                  = IOMUX_PAD(0xD070, 0xD070, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA29__PTA29                                      = IOMUX_PAD(0xD074, 0xD074, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA29__JTAG_TCLK_SWD_CLK                          = IOMUX_PAD(0xD074, 0xD074, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA29__FXIO0_D13                                  = IOMUX_PAD(0xD074, 0xD074, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA29__LPSPI1_SOUT                                = IOMUX_PAD(0xD074, 0xD074, IOMUX_CONFIG_MPORTS | 0x3, 0xD134, 0x1, 0),
+	MX7ULP_PAD_PTA29__LPUART3_RTS_b                              = IOMUX_PAD(0xD074, 0xD074, IOMUX_CONFIG_MPORTS | 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA29__LPI2C3_SDA                                 = IOMUX_PAD(0xD074, 0xD074, IOMUX_CONFIG_MPORTS | 0x5, 0xD1A4, 0x1, 0),
+	MX7ULP_PAD_PTA29__TPM1_CH0                                   = IOMUX_PAD(0xD074, 0xD074, IOMUX_CONFIG_MPORTS | 0x6, 0xD150, 0x2, 0),
+	MX7ULP_PAD_PTA29__I2S1_TXD3                                  = IOMUX_PAD(0xD074, 0xD074, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA30__ADC0_CH1A                                  = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA30__PTA30                                      = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA30__FXIO0_D14                                  = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA30__LPSPI1_SCK                                 = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0x3, 0xD12C, 0x1, 0),
+	MX7ULP_PAD_PTA30__LPUART3_TX                                 = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0x4, 0xD224, 0x1, 0),
+	MX7ULP_PAD_PTA30__LPI2C3_HREQ                                = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0x5, 0xD19C, 0x1, 0),
+	MX7ULP_PAD_PTA30__TPM2_CLKIN                                 = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0x6, 0xD1F4, 0x2, 0),
+	MX7ULP_PAD_PTA30__I2S1_TXD0                                  = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA30__JTAG_TRST_b                                = IOMUX_PAD(0xD078, 0xD078, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA31__ADC0_CH1B                                  = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA31__PTA31                                      = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA31__FXIO0_D15                                  = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA31__LPSPI1_PCS0                                = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0x3, 0xD11C, 0x2, 0),
+	MX7ULP_PAD_PTA31__LPUART3_RX                                 = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0x4, 0xD220, 0x2, 0),
+	MX7ULP_PAD_PTA31__TPM2_CH0                                   = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0x6, 0xD158, 0x2, 0),
+	MX7ULP_PAD_PTA31__I2S1_TXD1                                  = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA31__LPTMR0_ALT1                                = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTA31__EWM_IN                                     = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0xc, 0xD228, 0x1, 0),
+	MX7ULP_PAD_PTA31__LLWU0_P7                                   = IOMUX_PAD(0xD07C, 0xD07C, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB0__ADC0_CH0A                                   = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB0__PTB0                                        = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB0__FXIO0_D16                                   = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB0__LPSPI0_SIN                                  = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0x3, 0xD114, 0x3, 0),
+	MX7ULP_PAD_PTB0__LPUART0_TX                                  = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0x4, 0xD200, 0x3, 0),
+	MX7ULP_PAD_PTB0__TPM2_CH1                                    = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0x6, 0xD15C, 0x2, 0),
+	MX7ULP_PAD_PTB0__CLKOUT0                                     = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB0__CMP1_OUT                                    = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB0__EWM_OUT_b                                   = IOMUX_PAD(0xD080, 0xD080, IOMUX_CONFIG_MPORTS | 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB1__ADC0_CH0B                                   = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB1__PTB1                                        = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB1__FXIO0_D17                                   = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB1__LPSPI0_SOUT                                 = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0x3, 0xD118, 0x3, 0),
+	MX7ULP_PAD_PTB1__LPUART0_RX                                  = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0x4, 0xD1FC, 0x3, 0),
+	MX7ULP_PAD_PTB1__TPM3_CLKIN                                  = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0x6, 0xD1B0, 0x3, 0),
+	MX7ULP_PAD_PTB1__I2S1_TX_BCLK                                = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0x7, 0xD1D4, 0x2, 0),
+	MX7ULP_PAD_PTB1__RTC_CLKOUT                                  = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB1__EWM_IN                                      = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0xc, 0xD228, 0x2, 0),
+	MX7ULP_PAD_PTB1__LLWU0_P8                                    = IOMUX_PAD(0xD084, 0xD084, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB2__ADC0_CH4A_5A_6A                             = IOMUX_PAD(0xD088, 0xD088, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB2__PTB2                                        = IOMUX_PAD(0xD088, 0xD088, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB2__FXIO0_D18                                   = IOMUX_PAD(0xD088, 0xD088, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB2__LPSPI0_SCK                                  = IOMUX_PAD(0xD088, 0xD088, IOMUX_CONFIG_MPORTS | 0x3, 0xD110, 0x3, 0),
+	MX7ULP_PAD_PTB2__LPUART1_TX                                  = IOMUX_PAD(0xD088, 0xD088, IOMUX_CONFIG_MPORTS | 0x4, 0xD20C, 0x3, 0),
+	MX7ULP_PAD_PTB2__TPM3_CH0                                    = IOMUX_PAD(0xD088, 0xD088, IOMUX_CONFIG_MPORTS | 0x6, 0xD160, 0x2, 0),
+	MX7ULP_PAD_PTB2__I2S1_TX_FS                                  = IOMUX_PAD(0xD088, 0xD088, IOMUX_CONFIG_MPORTS | 0x7, 0xD1D8, 0x2, 0),
+	MX7ULP_PAD_PTB2__TRACE_CLKOUT                                = IOMUX_PAD(0xD088, 0xD088, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB3__ADC0_CH4B_5B_6B                             = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB3__PTB3                                        = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB3__FXIO0_D19                                   = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB3__LPSPI0_PCS0                                 = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0x3, 0xD100, 0x3, 0),
+	MX7ULP_PAD_PTB3__LPUART1_RX                                  = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0x4, 0xD208, 0x3, 0),
+	MX7ULP_PAD_PTB3__TPM3_CH1                                    = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0x6, 0xD164, 0x2, 0),
+	MX7ULP_PAD_PTB3__I2S1_TXD0                                   = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB3__TRACE_D0                                    = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB3__LPTMR1_ALT2                                 = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB3__LLWU0_P9                                    = IOMUX_PAD(0xD08C, 0xD08C, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB4__PTB4                                        = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB4__FXIO0_D20                                   = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB4__LPSPI0_PCS1                                 = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0x3, 0xD104, 0x3, 0),
+	MX7ULP_PAD_PTB4__LPUART2_TX                                  = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0x4, 0xD218, 0x3, 0),
+	MX7ULP_PAD_PTB4__LPI2C0_HREQ                                 = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0x5, 0xD178, 0x3, 0),
+	MX7ULP_PAD_PTB4__TPM3_CH2                                    = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0x6, 0xD168, 0x2, 0),
+	MX7ULP_PAD_PTB4__I2S1_TXD1                                   = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB4__QSPIA_DATA7                                 = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB4__TRACE_D1                                    = IOMUX_PAD(0xD090, 0xD090, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB5__PTB5                                        = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB5__FXIO0_D21                                   = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB5__LPSPI0_PCS2                                 = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0x3, 0xD108, 0x3, 0),
+	MX7ULP_PAD_PTB5__LPUART2_RX                                  = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0x4, 0xD214, 0x3, 0),
+	MX7ULP_PAD_PTB5__LPI2C1_HREQ                                 = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0x5, 0xD184, 0x3, 0),
+	MX7ULP_PAD_PTB5__TPM3_CH3                                    = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0x6, 0xD16C, 0x2, 0),
+	MX7ULP_PAD_PTB5__I2S1_TXD2                                   = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB5__QSPIA_DATA6                                 = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB5__TRACE_D2                                    = IOMUX_PAD(0xD094, 0xD094, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB6__ADC1_CH1A                                   = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB6__PTB6                                        = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB6__FXIO0_D22                                   = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB6__LPSPI0_PCS3                                 = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x3, 0xD10C, 0x3, 0),
+	MX7ULP_PAD_PTB6__LPUART3_TX                                  = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x4, 0xD224, 0x3, 0),
+	MX7ULP_PAD_PTB6__LPI2C0_SCL                                  = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x5, 0xD17C, 0x3, 0),
+	MX7ULP_PAD_PTB6__TPM3_CH4                                    = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x6, 0xD170, 0x2, 0),
+	MX7ULP_PAD_PTB6__I2S1_TXD3                                   = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB6__QSPIA_DATA5                                 = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB6__TRACE_D3                                    = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB6__LPTMR1_ALT3                                 = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB6__LLWU0_P10                                   = IOMUX_PAD(0xD098, 0xD098, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB7__ADC1_CH1B                                   = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB7__PTB7                                        = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB7__FXIO0_D23                                   = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB7__LPSPI1_SIN                                  = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x3, 0xD130, 0x3, 0),
+	MX7ULP_PAD_PTB7__LPUART3_RX                                  = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x4, 0xD220, 0x3, 0),
+	MX7ULP_PAD_PTB7__LPI2C0_SDA                                  = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x5, 0xD180, 0x3, 0),
+	MX7ULP_PAD_PTB7__TPM3_CH5                                    = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x6, 0xD174, 0x2, 0),
+	MX7ULP_PAD_PTB7__I2S1_MCLK                                   = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x7, 0xD1C8, 0x2, 0),
+	MX7ULP_PAD_PTB7__QSPIA_SS1_B                                 = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB7__CMP1_OUT                                    = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB7__LLWU0_P11                                   = IOMUX_PAD(0xD09C, 0xD09C, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB8__ADC0_CH14A_CMP0_IN0                         = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB8__PTB8                                        = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB8__FXIO0_D24                                   = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB8__LPSPI1_SOUT                                 = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0x3, 0xD134, 0x3, 0),
+	MX7ULP_PAD_PTB8__LPI2C1_SCL                                  = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0x5, 0xD188, 0x3, 0),
+	MX7ULP_PAD_PTB8__TPM0_CLKIN                                  = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0x6, 0xD1A8, 0x3, 0),
+	MX7ULP_PAD_PTB8__I2S1_RX_BCLK                                = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0x7, 0xD1CC, 0x2, 0),
+	MX7ULP_PAD_PTB8__QSPIA_SS0_B                                 = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB8__RTC_CLKOUT                                  = IOMUX_PAD(0xD0A0, 0xD0A0, IOMUX_CONFIG_MPORTS | 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB9__ADC0_CH14B_CMP0_IN2                         = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB9__PTB9                                        = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB9__FXIO0_D25                                   = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB9__LPSPI1_SCK                                  = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0x3, 0xD12C, 0x3, 0),
+	MX7ULP_PAD_PTB9__LPI2C1_SDA                                  = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0x5, 0xD18C, 0x3, 0),
+	MX7ULP_PAD_PTB9__TPM0_CH0                                    = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0x6, 0xD138, 0x3, 0),
+	MX7ULP_PAD_PTB9__I2S1_RX_FS                                  = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0x7, 0xD1D0, 0x2, 0),
+	MX7ULP_PAD_PTB9__QSPIA_DQS                                   = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB9__LLWU0_P12                                   = IOMUX_PAD(0xD0A4, 0xD0A4, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB10__CMP0_IN1                                   = IOMUX_PAD(0xD0A8, 0xD0A8, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB10__PTB10                                      = IOMUX_PAD(0xD0A8, 0xD0A8, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB10__FXIO0_D26                                  = IOMUX_PAD(0xD0A8, 0xD0A8, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB10__LPSPI1_PCS0                                = IOMUX_PAD(0xD0A8, 0xD0A8, IOMUX_CONFIG_MPORTS | 0x3, 0xD11C, 0x3, 0),
+	MX7ULP_PAD_PTB10__LPI2C2_SCL                                 = IOMUX_PAD(0xD0A8, 0xD0A8, IOMUX_CONFIG_MPORTS | 0x5, 0xD194, 0x3, 0),
+	MX7ULP_PAD_PTB10__TPM0_CH1                                   = IOMUX_PAD(0xD0A8, 0xD0A8, IOMUX_CONFIG_MPORTS | 0x6, 0xD13C, 0x3, 0),
+	MX7ULP_PAD_PTB10__I2S1_RXD0                                  = IOMUX_PAD(0xD0A8, 0xD0A8, IOMUX_CONFIG_MPORTS | 0x7, 0xD1E4, 0x2, 0),
+	MX7ULP_PAD_PTB10__TRACE_D4                                   = IOMUX_PAD(0xD0A8, 0xD0A8, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB11__CMP0_IN3                                   = IOMUX_PAD(0xD0AC, 0xD0AC, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB11__PTB11                                      = IOMUX_PAD(0xD0AC, 0xD0AC, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB11__FXIO0_D27                                  = IOMUX_PAD(0xD0AC, 0xD0AC, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB11__LPSPI1_PCS1                                = IOMUX_PAD(0xD0AC, 0xD0AC, IOMUX_CONFIG_MPORTS | 0x3, 0xD120, 0x3, 0),
+	MX7ULP_PAD_PTB11__LPI2C2_SDA                                 = IOMUX_PAD(0xD0AC, 0xD0AC, IOMUX_CONFIG_MPORTS | 0x5, 0xD198, 0x3, 0),
+	MX7ULP_PAD_PTB11__TPM1_CLKIN                                 = IOMUX_PAD(0xD0AC, 0xD0AC, IOMUX_CONFIG_MPORTS | 0x6, 0xD1AC, 0x3, 0),
+	MX7ULP_PAD_PTB11__I2S1_RXD1                                  = IOMUX_PAD(0xD0AC, 0xD0AC, IOMUX_CONFIG_MPORTS | 0x7, 0xD1E8, 0x2, 0),
+	MX7ULP_PAD_PTB11__TRACE_D5                                   = IOMUX_PAD(0xD0AC, 0xD0AC, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB12__ADC1_CH13A_CMP1_IN0                        = IOMUX_PAD(0xD0B0, 0xD0B0, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB12__PTB12                                      = IOMUX_PAD(0xD0B0, 0xD0B0, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB12__FXIO0_D28                                  = IOMUX_PAD(0xD0B0, 0xD0B0, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB12__LPSPI1_PCS2                                = IOMUX_PAD(0xD0B0, 0xD0B0, IOMUX_CONFIG_MPORTS | 0x3, 0xD124, 0x3, 0),
+	MX7ULP_PAD_PTB12__LPI2C3_SCL                                 = IOMUX_PAD(0xD0B0, 0xD0B0, IOMUX_CONFIG_MPORTS | 0x5, 0xD1A0, 0x3, 0),
+	MX7ULP_PAD_PTB12__TPM1_CH0                                   = IOMUX_PAD(0xD0B0, 0xD0B0, IOMUX_CONFIG_MPORTS | 0x6, 0xD150, 0x3, 0),
+	MX7ULP_PAD_PTB12__I2S1_RXD2                                  = IOMUX_PAD(0xD0B0, 0xD0B0, IOMUX_CONFIG_MPORTS | 0x7, 0xD1EC, 0x2, 0),
+	MX7ULP_PAD_PTB12__TRACE_D6                                   = IOMUX_PAD(0xD0B0, 0xD0B0, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB13__ADC1_CH13B_CMP1_IN1                        = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB13__PTB13                                      = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB13__FXIO0_D29                                  = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB13__LPSPI1_PCS3                                = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0x3, 0xD128, 0x3, 0),
+	MX7ULP_PAD_PTB13__LPI2C3_SDA                                 = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0x5, 0xD1A4, 0x3, 0),
+	MX7ULP_PAD_PTB13__TPM1_CH1                                   = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0x6, 0xD154, 0x3, 0),
+	MX7ULP_PAD_PTB13__I2S1_RXD3                                  = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0x7, 0xD1F0, 0x2, 0),
+	MX7ULP_PAD_PTB13__QSPIA_DATA4                                = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB13__TRACE_D7                                   = IOMUX_PAD(0xD0B4, 0xD0B4, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB14__ADC1_CH2A                                  = IOMUX_PAD(0xD0B8, 0xD0B8, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB14__PTB14                                      = IOMUX_PAD(0xD0B8, 0xD0B8, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB14__FXIO0_D30                                  = IOMUX_PAD(0xD0B8, 0xD0B8, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB14__LPI2C2_HREQ                                = IOMUX_PAD(0xD0B8, 0xD0B8, IOMUX_CONFIG_MPORTS | 0x5, 0xD190, 0x3, 0),
+	MX7ULP_PAD_PTB14__TPM2_CLKIN                                 = IOMUX_PAD(0xD0B8, 0xD0B8, IOMUX_CONFIG_MPORTS | 0x6, 0xD1F4, 0x3, 0),
+	MX7ULP_PAD_PTB14__QSPIA_SS1_B                                = IOMUX_PAD(0xD0B8, 0xD0B8, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB14__QSPIA_SCLK_b                               = IOMUX_PAD(0xD0B8, 0xD0B8, IOMUX_CONFIG_MPORTS | 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB14__LLWU0_P13                                  = IOMUX_PAD(0xD0B8, 0xD0B8, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB15__ADC1_CH2B                                  = IOMUX_PAD(0xD0BC, 0xD0BC, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB15__PTB15                                      = IOMUX_PAD(0xD0BC, 0xD0BC, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB15__FXIO0_D31                                  = IOMUX_PAD(0xD0BC, 0xD0BC, IOMUX_CONFIG_MPORTS | 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB15__LPI2C3_HREQ                                = IOMUX_PAD(0xD0BC, 0xD0BC, IOMUX_CONFIG_MPORTS | 0x5, 0xD19C, 0x3, 0),
+	MX7ULP_PAD_PTB15__TPM2_CH0                                   = IOMUX_PAD(0xD0BC, 0xD0BC, IOMUX_CONFIG_MPORTS | 0x6, 0xD158, 0x3, 0),
+	MX7ULP_PAD_PTB15__QSPIA_SCLK                                 = IOMUX_PAD(0xD0BC, 0xD0BC, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB16__ADC0_CH4A_5A_6A                            = IOMUX_PAD(0xD0C0, 0xD0C0, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB16__PTB16                                      = IOMUX_PAD(0xD0C0, 0xD0C0, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB16__TPM2_CH1                                   = IOMUX_PAD(0xD0C0, 0xD0C0, IOMUX_CONFIG_MPORTS | 0x6, 0xD15C, 0x3, 0),
+	MX7ULP_PAD_PTB16__QSPIA_DATA3                                = IOMUX_PAD(0xD0C0, 0xD0C0, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB16__LLWU0_P14                                  = IOMUX_PAD(0xD0C0, 0xD0C0, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB17__ADC0_CH4B_5B_6B                            = IOMUX_PAD(0xD0C4, 0xD0C4, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB17__PTB17                                      = IOMUX_PAD(0xD0C4, 0xD0C4, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB17__TPM3_CLKIN                                 = IOMUX_PAD(0xD0C4, 0xD0C4, IOMUX_CONFIG_MPORTS | 0x6, 0xD1B0, 0x2, 0),
+	MX7ULP_PAD_PTB17__QSPIA_DATA2                                = IOMUX_PAD(0xD0C4, 0xD0C4, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB18__ADC0_CH4A_5A_6A                            = IOMUX_PAD(0xD0C8, 0xD0C8, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB18__PTB18                                      = IOMUX_PAD(0xD0C8, 0xD0C8, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB18__TPM3_CH0                                   = IOMUX_PAD(0xD0C8, 0xD0C8, IOMUX_CONFIG_MPORTS | 0x6, 0xD160, 0x3, 0),
+	MX7ULP_PAD_PTB18__QSPIA_DATA1                                = IOMUX_PAD(0xD0C8, 0xD0C8, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB19__ADC0_CH4B_5B_6B                            = IOMUX_PAD(0xD0CC, 0xD0CC, IOMUX_CONFIG_MPORTS | 0x0, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB19__PTB19                                      = IOMUX_PAD(0xD0CC, 0xD0CC, IOMUX_CONFIG_MPORTS | 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB19__TPM3_CH1                                   = IOMUX_PAD(0xD0CC, 0xD0CC, IOMUX_CONFIG_MPORTS | 0x6, 0xD164, 0x3, 0),
+	MX7ULP_PAD_PTB19__QSPIA_DATA0                                = IOMUX_PAD(0xD0CC, 0xD0CC, IOMUX_CONFIG_MPORTS | 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB19__USB0_ID                                    = IOMUX_PAD(0xD0CC, 0xD0CC, IOMUX_CONFIG_MPORTS | 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTB19__LLWU0_P15                                  = IOMUX_PAD(0xD0CC, 0xD0CC, IOMUX_CONFIG_MPORTS | 0xd, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC0__PTC0                                        = IOMUX_PAD(0x0000, 0x0000, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC0__LPUART4_CTS_b                               = IOMUX_PAD(0x0000, 0x0000, 0x4, 0x0244, 0x1, 0),
+	MX7ULP_PAD_PTC0__LPI2C4_SCL                                  = IOMUX_PAD(0x0000, 0x0000, 0x5, 0x0278, 0x1, 0),
+	MX7ULP_PAD_PTC0__TPM4_CLKIN                                  = IOMUX_PAD(0x0000, 0x0000, 0x6, 0x0298, 0x1, 0),
+	MX7ULP_PAD_PTC0__FB_AD0                                      = IOMUX_PAD(0x0000, 0x0000, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC0__TRACE_D15                                   = IOMUX_PAD(0x0000, 0x0000, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC0__DEBUG_MUX0                                  = IOMUX_PAD(0x0000, 0x0000, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC1__PTC1                                        = IOMUX_PAD(0x0004, 0x0004, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC1__LPUART4_RTS_b                               = IOMUX_PAD(0x0004, 0x0004, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC1__LPI2C4_SDA                                  = IOMUX_PAD(0x0004, 0x0004, 0x5, 0x027C, 0x1, 0),
+	MX7ULP_PAD_PTC1__TPM4_CH0                                    = IOMUX_PAD(0x0004, 0x0004, 0x6, 0x0280, 0x1, 0),
+	MX7ULP_PAD_PTC1__FB_AD1                                      = IOMUX_PAD(0x0004, 0x0004, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC1__TRACE_D14                                   = IOMUX_PAD(0x0004, 0x0004, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC1__DEBUG_MUX1                                  = IOMUX_PAD(0x0004, 0x0004, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC2__PTC2                                        = IOMUX_PAD(0x0008, 0x0008, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC2__LPUART4_TX                                  = IOMUX_PAD(0x0008, 0x0008, 0x4, 0x024C, 0x1, 0),
+	MX7ULP_PAD_PTC2__LPI2C4_HREQ                                 = IOMUX_PAD(0x0008, 0x0008, 0x5, 0x0274, 0x1, 0),
+	MX7ULP_PAD_PTC2__TPM4_CH1                                    = IOMUX_PAD(0x0008, 0x0008, 0x6, 0x0284, 0x1, 0),
+	MX7ULP_PAD_PTC2__FB_AD2                                      = IOMUX_PAD(0x0008, 0x0008, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC2__TRACE_D13                                   = IOMUX_PAD(0x0008, 0x0008, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC2__DEBUG_MUX2                                  = IOMUX_PAD(0x0008, 0x0008, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC3__PTC3                                        = IOMUX_PAD(0x000C, 0x000C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC3__LPUART4_RX                                  = IOMUX_PAD(0x000C, 0x000C, 0x4, 0x0248, 0x1, 0),
+	MX7ULP_PAD_PTC3__TPM4_CH2                                    = IOMUX_PAD(0x000C, 0x000C, 0x6, 0x0288, 0x1, 0),
+	MX7ULP_PAD_PTC3__FB_AD3                                      = IOMUX_PAD(0x000C, 0x000C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC3__TRACE_D12                                   = IOMUX_PAD(0x000C, 0x000C, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC3__DEBUG_MUX3                                  = IOMUX_PAD(0x000C, 0x000C, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC4__PTC4                                        = IOMUX_PAD(0x0010, 0x0010, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC4__FXIO1_D0                                    = IOMUX_PAD(0x0010, 0x0010, 0x2, 0x0204, 0x1, 0),
+	MX7ULP_PAD_PTC4__LPSPI2_PCS1                                 = IOMUX_PAD(0x0010, 0x0010, 0x3, 0x02A0, 0x1, 0),
+	MX7ULP_PAD_PTC4__LPUART5_CTS_b                               = IOMUX_PAD(0x0010, 0x0010, 0x4, 0x0250, 0x1, 0),
+	MX7ULP_PAD_PTC4__LPI2C5_SCL                                  = IOMUX_PAD(0x0010, 0x0010, 0x5, 0x02BC, 0x1, 0),
+	MX7ULP_PAD_PTC4__TPM4_CH3                                    = IOMUX_PAD(0x0010, 0x0010, 0x6, 0x028C, 0x1, 0),
+	MX7ULP_PAD_PTC4__FB_AD4                                      = IOMUX_PAD(0x0010, 0x0010, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC4__TRACE_D11                                   = IOMUX_PAD(0x0010, 0x0010, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC4__DEBUG_MUX4                                  = IOMUX_PAD(0x0010, 0x0010, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC5__PTC5                                        = IOMUX_PAD(0x0014, 0x0014, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC5__FXIO1_D1                                    = IOMUX_PAD(0x0014, 0x0014, 0x2, 0x0208, 0x1, 0),
+	MX7ULP_PAD_PTC5__LPSPI2_PCS2                                 = IOMUX_PAD(0x0014, 0x0014, 0x3, 0x02A4, 0x1, 0),
+	MX7ULP_PAD_PTC5__LPUART5_RTS_b                               = IOMUX_PAD(0x0014, 0x0014, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC5__LPI2C5_SDA                                  = IOMUX_PAD(0x0014, 0x0014, 0x5, 0x02C0, 0x1, 0),
+	MX7ULP_PAD_PTC5__TPM4_CH4                                    = IOMUX_PAD(0x0014, 0x0014, 0x6, 0x0290, 0x1, 0),
+	MX7ULP_PAD_PTC5__FB_AD5                                      = IOMUX_PAD(0x0014, 0x0014, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC5__TRACE_D10                                   = IOMUX_PAD(0x0014, 0x0014, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC5__DEBUG_MUX5                                  = IOMUX_PAD(0x0014, 0x0014, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC6__PTC6                                        = IOMUX_PAD(0x0018, 0x0018, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC6__FXIO1_D2                                    = IOMUX_PAD(0x0018, 0x0018, 0x2, 0x020C, 0x1, 0),
+	MX7ULP_PAD_PTC6__LPSPI2_PCS3                                 = IOMUX_PAD(0x0018, 0x0018, 0x3, 0x02A8, 0x1, 0),
+	MX7ULP_PAD_PTC6__LPUART5_TX                                  = IOMUX_PAD(0x0018, 0x0018, 0x4, 0x0258, 0x1, 0),
+	MX7ULP_PAD_PTC6__LPI2C5_HREQ                                 = IOMUX_PAD(0x0018, 0x0018, 0x5, 0x02B8, 0x1, 0),
+	MX7ULP_PAD_PTC6__TPM4_CH5                                    = IOMUX_PAD(0x0018, 0x0018, 0x6, 0x0294, 0x1, 0),
+	MX7ULP_PAD_PTC6__FB_AD6                                      = IOMUX_PAD(0x0018, 0x0018, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC6__TRACE_D9                                    = IOMUX_PAD(0x0018, 0x0018, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC6__DEBUG_MUX6                                  = IOMUX_PAD(0x0018, 0x0018, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC7__PTC7                                        = IOMUX_PAD(0x001C, 0x001C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC7__FXIO1_D3                                    = IOMUX_PAD(0x001C, 0x001C, 0x2, 0x0210, 0x1, 0),
+	MX7ULP_PAD_PTC7__LPUART5_RX                                  = IOMUX_PAD(0x001C, 0x001C, 0x4, 0x0254, 0x1, 0),
+	MX7ULP_PAD_PTC7__TPM5_CH1                                    = IOMUX_PAD(0x001C, 0x001C, 0x6, 0x02C8, 0x1, 0),
+	MX7ULP_PAD_PTC7__FB_AD7                                      = IOMUX_PAD(0x001C, 0x001C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC7__TRACE_D8                                    = IOMUX_PAD(0x001C, 0x001C, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC7__DEBUG_MUX7                                  = IOMUX_PAD(0x001C, 0x001C, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC8__PTC8                                        = IOMUX_PAD(0x0020, 0x0020, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC8__FXIO1_D4                                    = IOMUX_PAD(0x0020, 0x0020, 0x2, 0x0214, 0x1, 0),
+	MX7ULP_PAD_PTC8__LPSPI2_SIN                                  = IOMUX_PAD(0x0020, 0x0020, 0x3, 0x02B0, 0x1, 0),
+	MX7ULP_PAD_PTC8__LPUART6_CTS_b                               = IOMUX_PAD(0x0020, 0x0020, 0x4, 0x025C, 0x1, 0),
+	MX7ULP_PAD_PTC8__LPI2C6_SCL                                  = IOMUX_PAD(0x0020, 0x0020, 0x5, 0x02FC, 0x1, 0),
+	MX7ULP_PAD_PTC8__TPM5_CLKIN                                  = IOMUX_PAD(0x0020, 0x0020, 0x6, 0x02CC, 0x1, 0),
+	MX7ULP_PAD_PTC8__FB_AD8                                      = IOMUX_PAD(0x0020, 0x0020, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC8__TRACE_D7                                    = IOMUX_PAD(0x0020, 0x0020, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC8__DEBUG_MUX8                                  = IOMUX_PAD(0x0020, 0x0020, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC9__PTC9                                        = IOMUX_PAD(0x0024, 0x0024, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC9__FXIO1_D5                                    = IOMUX_PAD(0x0024, 0x0024, 0x2, 0x0218, 0x1, 0),
+	MX7ULP_PAD_PTC9__LPSPI2_SOUT                                 = IOMUX_PAD(0x0024, 0x0024, 0x3, 0x02B4, 0x1, 0),
+	MX7ULP_PAD_PTC9__LPUART6_RTS_b                               = IOMUX_PAD(0x0024, 0x0024, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC9__LPI2C6_SDA                                  = IOMUX_PAD(0x0024, 0x0024, 0x5, 0x0300, 0x1, 0),
+	MX7ULP_PAD_PTC9__TPM5_CH0                                    = IOMUX_PAD(0x0024, 0x0024, 0x6, 0x02C4, 0x1, 0),
+	MX7ULP_PAD_PTC9__FB_AD9                                      = IOMUX_PAD(0x0024, 0x0024, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC9__TRACE_D6                                    = IOMUX_PAD(0x0024, 0x0024, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC9__DEBUG_MUX9                                  = IOMUX_PAD(0x0024, 0x0024, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC10__PTC10                                      = IOMUX_PAD(0x0028, 0x0028, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC10__FXIO1_D6                                   = IOMUX_PAD(0x0028, 0x0028, 0x2, 0x021C, 0x1, 0),
+	MX7ULP_PAD_PTC10__LPSPI2_SCK                                 = IOMUX_PAD(0x0028, 0x0028, 0x3, 0x02AC, 0x1, 0),
+	MX7ULP_PAD_PTC10__LPUART6_TX                                 = IOMUX_PAD(0x0028, 0x0028, 0x4, 0x0264, 0x1, 0),
+	MX7ULP_PAD_PTC10__LPI2C6_HREQ                                = IOMUX_PAD(0x0028, 0x0028, 0x5, 0x02F8, 0x1, 0),
+	MX7ULP_PAD_PTC10__TPM7_CH3                                   = IOMUX_PAD(0x0028, 0x0028, 0x6, 0x02E8, 0x1, 0),
+	MX7ULP_PAD_PTC10__FB_AD10                                    = IOMUX_PAD(0x0028, 0x0028, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC10__TRACE_D5                                   = IOMUX_PAD(0x0028, 0x0028, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC10__DEBUG_MUX10                                = IOMUX_PAD(0x0028, 0x0028, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC11__PTC11                                      = IOMUX_PAD(0x002C, 0x002C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC11__FXIO1_D7                                   = IOMUX_PAD(0x002C, 0x002C, 0x2, 0x0220, 0x1, 0),
+	MX7ULP_PAD_PTC11__LPSPI2_PCS0                                = IOMUX_PAD(0x002C, 0x002C, 0x3, 0x029C, 0x1, 0),
+	MX7ULP_PAD_PTC11__LPUART6_RX                                 = IOMUX_PAD(0x002C, 0x002C, 0x4, 0x0260, 0x1, 0),
+	MX7ULP_PAD_PTC11__TPM7_CH4                                   = IOMUX_PAD(0x002C, 0x002C, 0x6, 0x02EC, 0x1, 0),
+	MX7ULP_PAD_PTC11__FB_AD11                                    = IOMUX_PAD(0x002C, 0x002C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC11__TRACE_D4                                   = IOMUX_PAD(0x002C, 0x002C, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC11__DEBUG_MUX11                                = IOMUX_PAD(0x002C, 0x002C, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC12__PTC12                                      = IOMUX_PAD(0x0030, 0x0030, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC12__FXIO1_D8                                   = IOMUX_PAD(0x0030, 0x0030, 0x2, 0x0224, 0x1, 0),
+	MX7ULP_PAD_PTC12__LPSPI3_PCS1                                = IOMUX_PAD(0x0030, 0x0030, 0x3, 0x0314, 0x1, 0),
+	MX7ULP_PAD_PTC12__LPUART7_CTS_b                              = IOMUX_PAD(0x0030, 0x0030, 0x4, 0x0268, 0x1, 0),
+	MX7ULP_PAD_PTC12__LPI2C7_SCL                                 = IOMUX_PAD(0x0030, 0x0030, 0x5, 0x0308, 0x1, 0),
+	MX7ULP_PAD_PTC12__TPM7_CH5                                   = IOMUX_PAD(0x0030, 0x0030, 0x6, 0x02F0, 0x1, 0),
+	MX7ULP_PAD_PTC12__FB_AD12                                    = IOMUX_PAD(0x0030, 0x0030, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC12__TRACE_D3                                   = IOMUX_PAD(0x0030, 0x0030, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC12__DEBUG_MUX12                                = IOMUX_PAD(0x0030, 0x0030, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC13__PTC13                                      = IOMUX_PAD(0x0034, 0x0034, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC13__FXIO1_D9                                   = IOMUX_PAD(0x0034, 0x0034, 0x2, 0x0228, 0x1, 0),
+	MX7ULP_PAD_PTC13__LPSPI3_PCS2                                = IOMUX_PAD(0x0034, 0x0034, 0x3, 0x0318, 0x1, 0),
+	MX7ULP_PAD_PTC13__LPUART7_RTS_b                              = IOMUX_PAD(0x0034, 0x0034, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC13__LPI2C7_SDA                                 = IOMUX_PAD(0x0034, 0x0034, 0x5, 0x030C, 0x1, 0),
+	MX7ULP_PAD_PTC13__TPM7_CLKIN                                 = IOMUX_PAD(0x0034, 0x0034, 0x6, 0x02F4, 0x1, 0),
+	MX7ULP_PAD_PTC13__FB_AD13                                    = IOMUX_PAD(0x0034, 0x0034, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC13__TRACE_D2                                   = IOMUX_PAD(0x0034, 0x0034, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC13__DEBUG_MUX13                                = IOMUX_PAD(0x0034, 0x0034, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC14__PTC14                                      = IOMUX_PAD(0x0038, 0x0038, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC14__FXIO1_D10                                  = IOMUX_PAD(0x0038, 0x0038, 0x2, 0x022C, 0x1, 0),
+	MX7ULP_PAD_PTC14__LPSPI3_PCS3                                = IOMUX_PAD(0x0038, 0x0038, 0x3, 0x031C, 0x1, 0),
+	MX7ULP_PAD_PTC14__LPUART7_TX                                 = IOMUX_PAD(0x0038, 0x0038, 0x4, 0x0270, 0x1, 0),
+	MX7ULP_PAD_PTC14__LPI2C7_HREQ                                = IOMUX_PAD(0x0038, 0x0038, 0x5, 0x0304, 0x1, 0),
+	MX7ULP_PAD_PTC14__TPM7_CH0                                   = IOMUX_PAD(0x0038, 0x0038, 0x6, 0x02DC, 0x1, 0),
+	MX7ULP_PAD_PTC14__FB_AD14                                    = IOMUX_PAD(0x0038, 0x0038, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC14__TRACE_D1                                   = IOMUX_PAD(0x0038, 0x0038, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC14__DEBUG_MUX14                                = IOMUX_PAD(0x0038, 0x0038, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC15__PTC15                                      = IOMUX_PAD(0x003C, 0x003C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC15__FXIO1_D11                                  = IOMUX_PAD(0x003C, 0x003C, 0x2, 0x0230, 0x1, 0),
+	MX7ULP_PAD_PTC15__LPUART7_RX                                 = IOMUX_PAD(0x003C, 0x003C, 0x4, 0x026C, 0x1, 0),
+	MX7ULP_PAD_PTC15__TPM7_CH1                                   = IOMUX_PAD(0x003C, 0x003C, 0x6, 0x02E0, 0x1, 0),
+	MX7ULP_PAD_PTC15__FB_AD15                                    = IOMUX_PAD(0x003C, 0x003C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC15__TRACE_D0                                   = IOMUX_PAD(0x003C, 0x003C, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC15__DEBUG_MUX15                                = IOMUX_PAD(0x003C, 0x003C, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC16__PTC16                                      = IOMUX_PAD(0x0040, 0x0040, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC16__FXIO1_D12                                  = IOMUX_PAD(0x0040, 0x0040, 0x2, 0x0234, 0x1, 0),
+	MX7ULP_PAD_PTC16__LPSPI3_SIN                                 = IOMUX_PAD(0x0040, 0x0040, 0x3, 0x0324, 0x1, 0),
+	MX7ULP_PAD_PTC16__TPM7_CH2                                   = IOMUX_PAD(0x0040, 0x0040, 0x6, 0x02E4, 0x1, 0),
+	MX7ULP_PAD_PTC16__FB_ALE_FB_CS1_b_FB_TS_b                    = IOMUX_PAD(0x0040, 0x0040, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC16__TRACE_CLKOUT                               = IOMUX_PAD(0x0040, 0x0040, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC16__USB1_ULPI_OC2                              = IOMUX_PAD(0x0040, 0x0040, 0xb, 0x0334, 0x1, 0),
+	MX7ULP_PAD_PTC17__PTC17                                      = IOMUX_PAD(0x0044, 0x0044, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC17__FXIO1_D13                                  = IOMUX_PAD(0x0044, 0x0044, 0x2, 0x0238, 0x1, 0),
+	MX7ULP_PAD_PTC17__LPSPI3_SOUT                                = IOMUX_PAD(0x0044, 0x0044, 0x3, 0x0328, 0x1, 0),
+	MX7ULP_PAD_PTC17__TPM6_CLKIN                                 = IOMUX_PAD(0x0044, 0x0044, 0x6, 0x02D8, 0x1, 0),
+	MX7ULP_PAD_PTC17__FB_CS0_b                                   = IOMUX_PAD(0x0044, 0x0044, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC17__DEBUG_MUX16                                = IOMUX_PAD(0x0044, 0x0044, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC18__PTC18                                      = IOMUX_PAD(0x0048, 0x0048, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC18__FXIO1_D14                                  = IOMUX_PAD(0x0048, 0x0048, 0x2, 0x023C, 0x1, 0),
+	MX7ULP_PAD_PTC18__LPSPI3_SCK                                 = IOMUX_PAD(0x0048, 0x0048, 0x3, 0x0320, 0x1, 0),
+	MX7ULP_PAD_PTC18__TPM6_CH0                                   = IOMUX_PAD(0x0048, 0x0048, 0x6, 0x02D0, 0x1, 0),
+	MX7ULP_PAD_PTC18__FB_OE_b                                    = IOMUX_PAD(0x0048, 0x0048, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC18__DEBUG_MUX17                                = IOMUX_PAD(0x0048, 0x0048, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC19__PTC19                                      = IOMUX_PAD(0x004C, 0x004C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC19__FXIO1_D15                                  = IOMUX_PAD(0x004C, 0x004C, 0x2, 0x0240, 0x1, 0),
+	MX7ULP_PAD_PTC19__LPSPI3_PCS0                                = IOMUX_PAD(0x004C, 0x004C, 0x3, 0x0310, 0x1, 0),
+	MX7ULP_PAD_PTC19__TPM6_CH1                                   = IOMUX_PAD(0x004C, 0x004C, 0x6, 0x02D4, 0x1, 0),
+	MX7ULP_PAD_PTC19__FB_A16                                     = IOMUX_PAD(0x004C, 0x004C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTC19__USB1_ULPI_PWR2                             = IOMUX_PAD(0x004C, 0x004C, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD0__PTD0                                        = IOMUX_PAD(0x0080, 0x0080, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD0__SDHC0_RESET_b                               = IOMUX_PAD(0x0080, 0x0080, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD0__DEBUG_MUX18                                 = IOMUX_PAD(0x0080, 0x0080, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD1__PTD1                                        = IOMUX_PAD(0x0084, 0x0084, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD1__SDHC0_CMD                                   = IOMUX_PAD(0x0084, 0x0084, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD1__DEBUG_MUX19                                 = IOMUX_PAD(0x0084, 0x0084, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD2__PTD2                                        = IOMUX_PAD(0x0088, 0x0088, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD2__SDHC0_CLK                                   = IOMUX_PAD(0x0088, 0x0088, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD2__DEBUG_MUX20                                 = IOMUX_PAD(0x0088, 0x0088, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD3__PTD3                                        = IOMUX_PAD(0x008C, 0x008C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD3__SDHC0_D7                                    = IOMUX_PAD(0x008C, 0x008C, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD3__DEBUG_MUX21                                 = IOMUX_PAD(0x008C, 0x008C, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD4__PTD4                                        = IOMUX_PAD(0x0090, 0x0090, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD4__SDHC0_D6                                    = IOMUX_PAD(0x0090, 0x0090, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD4__DEBUG_MUX22                                 = IOMUX_PAD(0x0090, 0x0090, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD5__PTD5                                        = IOMUX_PAD(0x0094, 0x0094, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD5__SDHC0_D5                                    = IOMUX_PAD(0x0094, 0x0094, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD5__DEBUG_MUX23                                 = IOMUX_PAD(0x0094, 0x0094, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD6__PTD6                                        = IOMUX_PAD(0x0098, 0x0098, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD6__SDHC0_D4                                    = IOMUX_PAD(0x0098, 0x0098, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD6__DEBUG_MUX24                                 = IOMUX_PAD(0x0098, 0x0098, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD7__PTD7                                        = IOMUX_PAD(0x009C, 0x009C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD7__SDHC0_D3                                    = IOMUX_PAD(0x009C, 0x009C, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD7__DEBUG_MUX25                                 = IOMUX_PAD(0x009C, 0x009C, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD8__PTD8                                        = IOMUX_PAD(0x00A0, 0x00A0, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD8__TPM4_CLKIN                                  = IOMUX_PAD(0x00A0, 0x00A0, 0x6, 0x0298, 0x2, 0),
+	MX7ULP_PAD_PTD8__SDHC0_D2                                    = IOMUX_PAD(0x00A0, 0x00A0, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD8__DEBUG_MUX26                                 = IOMUX_PAD(0x00A0, 0x00A0, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD9__PTD9                                        = IOMUX_PAD(0x00A4, 0x00A4, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD9__TPM4_CH0                                    = IOMUX_PAD(0x00A4, 0x00A4, 0x6, 0x0280, 0x2, 0),
+	MX7ULP_PAD_PTD9__SDHC0_D1                                    = IOMUX_PAD(0x00A4, 0x00A4, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD9__DEBUG_MUX27                                 = IOMUX_PAD(0x00A4, 0x00A4, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD10__PTD10                                      = IOMUX_PAD(0x00A8, 0x00A8, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD10__TPM4_CH1                                   = IOMUX_PAD(0x00A8, 0x00A8, 0x6, 0x0284, 0x2, 0),
+	MX7ULP_PAD_PTD10__SDHC0_D0                                   = IOMUX_PAD(0x00A8, 0x00A8, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD10__DEBUG_MUX28                                = IOMUX_PAD(0x00A8, 0x00A8, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD11__PTD11                                      = IOMUX_PAD(0x00AC, 0x00AC, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD11__TPM4_CH2                                   = IOMUX_PAD(0x00AC, 0x00AC, 0x6, 0x0288, 0x2, 0),
+	MX7ULP_PAD_PTD11__SDHC0_DQS                                  = IOMUX_PAD(0x00AC, 0x00AC, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTD11__DEBUG_MUX29                                = IOMUX_PAD(0x00AC, 0x00AC, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE0__PTE0                                        = IOMUX_PAD(0x0100, 0x0100, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE0__FXIO1_D31                                   = IOMUX_PAD(0x0100, 0x0100, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE0__LPSPI2_PCS1                                 = IOMUX_PAD(0x0100, 0x0100, 0x3, 0x02A0, 0x2, 0),
+	MX7ULP_PAD_PTE0__LPUART4_CTS_b                               = IOMUX_PAD(0x0100, 0x0100, 0x4, 0x0244, 0x2, 0),
+	MX7ULP_PAD_PTE0__LPI2C4_SCL                                  = IOMUX_PAD(0x0100, 0x0100, 0x5, 0x0278, 0x2, 0),
+	MX7ULP_PAD_PTE0__SDHC1_D1                                    = IOMUX_PAD(0x0100, 0x0100, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE0__FB_A25                                      = IOMUX_PAD(0x0100, 0x0100, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE0__DEBUG_MUX30                                 = IOMUX_PAD(0x0100, 0x0100, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE1__PTE1                                        = IOMUX_PAD(0x0104, 0x0104, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE1__FXIO1_D30                                   = IOMUX_PAD(0x0104, 0x0104, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE1__LPSPI2_PCS2                                 = IOMUX_PAD(0x0104, 0x0104, 0x3, 0x02A4, 0x2, 0),
+	MX7ULP_PAD_PTE1__LPUART4_RTS_b                               = IOMUX_PAD(0x0104, 0x0104, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE1__LPI2C4_SDA                                  = IOMUX_PAD(0x0104, 0x0104, 0x5, 0x027C, 0x2, 0),
+	MX7ULP_PAD_PTE1__SDHC1_D0                                    = IOMUX_PAD(0x0104, 0x0104, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE1__FB_A26                                      = IOMUX_PAD(0x0104, 0x0104, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE1__DEBUG_MUX31                                 = IOMUX_PAD(0x0104, 0x0104, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE2__PTE2                                        = IOMUX_PAD(0x0108, 0x0108, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE2__FXIO1_D29                                   = IOMUX_PAD(0x0108, 0x0108, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE2__LPSPI2_PCS3                                 = IOMUX_PAD(0x0108, 0x0108, 0x3, 0x02A8, 0x2, 0),
+	MX7ULP_PAD_PTE2__LPUART4_TX                                  = IOMUX_PAD(0x0108, 0x0108, 0x4, 0x024C, 0x2, 0),
+	MX7ULP_PAD_PTE2__LPI2C4_HREQ                                 = IOMUX_PAD(0x0108, 0x0108, 0x5, 0x0274, 0x2, 0),
+	MX7ULP_PAD_PTE2__SDHC1_CLK                                   = IOMUX_PAD(0x0108, 0x0108, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE2__DEBUG_MUX32                                 = IOMUX_PAD(0x0108, 0x0108, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE3__PTE3                                        = IOMUX_PAD(0x010C, 0x010C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE3__FXIO1_D28                                   = IOMUX_PAD(0x010C, 0x010C, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE3__LPUART4_RX                                  = IOMUX_PAD(0x010C, 0x010C, 0x4, 0x0248, 0x2, 0),
+	MX7ULP_PAD_PTE3__TPM5_CH1                                    = IOMUX_PAD(0x010C, 0x010C, 0x6, 0x02C8, 0x2, 0),
+	MX7ULP_PAD_PTE3__SDHC1_CMD                                   = IOMUX_PAD(0x010C, 0x010C, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE3__DEBUG_MUX33                                 = IOMUX_PAD(0x010C, 0x010C, 0xe, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE4__PTE4                                        = IOMUX_PAD(0x0110, 0x0110, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE4__FXIO1_D27                                   = IOMUX_PAD(0x0110, 0x0110, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE4__LPSPI2_SIN                                  = IOMUX_PAD(0x0110, 0x0110, 0x3, 0x02B0, 0x2, 0),
+	MX7ULP_PAD_PTE4__LPUART5_CTS_b                               = IOMUX_PAD(0x0110, 0x0110, 0x4, 0x0250, 0x2, 0),
+	MX7ULP_PAD_PTE4__LPI2C5_SCL                                  = IOMUX_PAD(0x0110, 0x0110, 0x5, 0x02BC, 0x2, 0),
+	MX7ULP_PAD_PTE4__TPM5_CLKIN                                  = IOMUX_PAD(0x0110, 0x0110, 0x6, 0x02CC, 0x2, 0),
+	MX7ULP_PAD_PTE4__SDHC1_D3                                    = IOMUX_PAD(0x0110, 0x0110, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE5__PTE5                                        = IOMUX_PAD(0x0114, 0x0114, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE5__FXIO1_D26                                   = IOMUX_PAD(0x0114, 0x0114, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE5__LPSPI2_SOUT                                 = IOMUX_PAD(0x0114, 0x0114, 0x3, 0x02B4, 0x2, 0),
+	MX7ULP_PAD_PTE5__LPUART5_RTS_b                               = IOMUX_PAD(0x0114, 0x0114, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE5__LPI2C5_SDA                                  = IOMUX_PAD(0x0114, 0x0114, 0x5, 0x02C0, 0x2, 0),
+	MX7ULP_PAD_PTE5__TPM5_CH0                                    = IOMUX_PAD(0x0114, 0x0114, 0x6, 0x02C4, 0x2, 0),
+	MX7ULP_PAD_PTE5__SDHC1_D2                                    = IOMUX_PAD(0x0114, 0x0114, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE6__PTE6                                        = IOMUX_PAD(0x0118, 0x0118, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE6__FXIO1_D25                                   = IOMUX_PAD(0x0118, 0x0118, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE6__LPSPI2_SCK                                  = IOMUX_PAD(0x0118, 0x0118, 0x3, 0x02AC, 0x2, 0),
+	MX7ULP_PAD_PTE6__LPUART5_TX                                  = IOMUX_PAD(0x0118, 0x0118, 0x4, 0x0258, 0x2, 0),
+	MX7ULP_PAD_PTE6__LPI2C5_HREQ                                 = IOMUX_PAD(0x0118, 0x0118, 0x5, 0x02B8, 0x2, 0),
+	MX7ULP_PAD_PTE6__TPM7_CH3                                    = IOMUX_PAD(0x0118, 0x0118, 0x6, 0x02E8, 0x2, 0),
+	MX7ULP_PAD_PTE6__SDHC1_D4                                    = IOMUX_PAD(0x0118, 0x0118, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE6__FB_A17                                      = IOMUX_PAD(0x0118, 0x0118, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE6__USB0_OC                                     = IOMUX_PAD(0x0118, 0x0118, 0xb, 0x0330, 0x1, 0),
+	MX7ULP_PAD_PTE7__PTE7                                        = IOMUX_PAD(0x011C, 0x011C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE7__FXIO1_D24                                   = IOMUX_PAD(0x011C, 0x011C, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE7__LPSPI2_PCS0                                 = IOMUX_PAD(0x011C, 0x011C, 0x3, 0x029C, 0x2, 0),
+	MX7ULP_PAD_PTE7__LPUART5_RX                                  = IOMUX_PAD(0x011C, 0x011C, 0x4, 0x0254, 0x2, 0),
+	MX7ULP_PAD_PTE7__TPM7_CH4                                    = IOMUX_PAD(0x011C, 0x011C, 0x6, 0x02EC, 0x2, 0),
+	MX7ULP_PAD_PTE7__SDHC1_D5                                    = IOMUX_PAD(0x011C, 0x011C, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE7__FB_A18                                      = IOMUX_PAD(0x011C, 0x011C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE7__TRACE_D7                                    = IOMUX_PAD(0x011C, 0x011C, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE7__USB0_PWR                                    = IOMUX_PAD(0x011C, 0x011C, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE7__VIU_FID                                     = IOMUX_PAD(0x011C, 0x011C, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE8__PTE8                                        = IOMUX_PAD(0x0120, 0x0120, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE8__TRACE_D6                                    = IOMUX_PAD(0x0120, 0x0120, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE8__VIU_D16                                     = IOMUX_PAD(0x0120, 0x0120, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE8__FXIO1_D23                                   = IOMUX_PAD(0x0120, 0x0120, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE8__LPSPI3_PCS1                                 = IOMUX_PAD(0x0120, 0x0120, 0x3, 0x0314, 0x2, 0),
+	MX7ULP_PAD_PTE8__LPUART6_CTS_b                               = IOMUX_PAD(0x0120, 0x0120, 0x4, 0x025C, 0x2, 0),
+	MX7ULP_PAD_PTE8__LPI2C6_SCL                                  = IOMUX_PAD(0x0120, 0x0120, 0x5, 0x02FC, 0x2, 0),
+	MX7ULP_PAD_PTE8__TPM7_CH5                                    = IOMUX_PAD(0x0120, 0x0120, 0x6, 0x02F0, 0x2, 0),
+	MX7ULP_PAD_PTE8__SDHC1_WP                                    = IOMUX_PAD(0x0120, 0x0120, 0x7, 0x0200, 0x1, 0),
+	MX7ULP_PAD_PTE8__SDHC1_D6                                    = IOMUX_PAD(0x0120, 0x0120, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE8__FB_CS3_b_FB_BE7_0_BLS31_24_b                = IOMUX_PAD(0x0120, 0x0120, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE9__PTE9                                        = IOMUX_PAD(0x0124, 0x0124, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE9__TRACE_D5                                    = IOMUX_PAD(0x0124, 0x0124, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE9__VIU_D17                                     = IOMUX_PAD(0x0124, 0x0124, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE9__FXIO1_D22                                   = IOMUX_PAD(0x0124, 0x0124, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE9__LPSPI3_PCS2                                 = IOMUX_PAD(0x0124, 0x0124, 0x3, 0x0318, 0x2, 0),
+	MX7ULP_PAD_PTE9__LPUART6_RTS_b                               = IOMUX_PAD(0x0124, 0x0124, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE9__LPI2C6_SDA                                  = IOMUX_PAD(0x0124, 0x0124, 0x5, 0x0300, 0x2, 0),
+	MX7ULP_PAD_PTE9__TPM7_CLKIN                                  = IOMUX_PAD(0x0124, 0x0124, 0x6, 0x02F4, 0x2, 0),
+	MX7ULP_PAD_PTE9__SDHC1_CD                                    = IOMUX_PAD(0x0124, 0x0124, 0x7, 0x032C, 0x1, 0),
+	MX7ULP_PAD_PTE9__SDHC1_D7                                    = IOMUX_PAD(0x0124, 0x0124, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE9__FB_TBST_b_FB_CS2_b_FB_BE15_8_BLS23_16_b     = IOMUX_PAD(0x0124, 0x0124, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE10__PTE10                                      = IOMUX_PAD(0x0128, 0x0128, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE10__TRACE_D4                                   = IOMUX_PAD(0x0128, 0x0128, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE10__VIU_D18                                    = IOMUX_PAD(0x0128, 0x0128, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE10__FXIO1_D21                                  = IOMUX_PAD(0x0128, 0x0128, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE10__LPSPI3_PCS3                                = IOMUX_PAD(0x0128, 0x0128, 0x3, 0x031C, 0x2, 0),
+	MX7ULP_PAD_PTE10__LPUART6_TX                                 = IOMUX_PAD(0x0128, 0x0128, 0x4, 0x0264, 0x2, 0),
+	MX7ULP_PAD_PTE10__LPI2C6_HREQ                                = IOMUX_PAD(0x0128, 0x0128, 0x5, 0x02F8, 0x2, 0),
+	MX7ULP_PAD_PTE10__TPM7_CH0                                   = IOMUX_PAD(0x0128, 0x0128, 0x6, 0x02DC, 0x2, 0),
+	MX7ULP_PAD_PTE10__SDHC1_VS                                   = IOMUX_PAD(0x0128, 0x0128, 0x7, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE10__SDHC1_DQS                                  = IOMUX_PAD(0x0128, 0x0128, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE10__FB_A19                                     = IOMUX_PAD(0x0128, 0x0128, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE11__PTE11                                      = IOMUX_PAD(0x012C, 0x012C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE11__TRACE_D3                                   = IOMUX_PAD(0x012C, 0x012C, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE11__VIU_D19                                    = IOMUX_PAD(0x012C, 0x012C, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE11__FXIO1_D20                                  = IOMUX_PAD(0x012C, 0x012C, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE11__LPUART6_RX                                 = IOMUX_PAD(0x012C, 0x012C, 0x4, 0x0260, 0x2, 0),
+	MX7ULP_PAD_PTE11__TPM7_CH1                                   = IOMUX_PAD(0x012C, 0x012C, 0x6, 0x02E0, 0x2, 0),
+	MX7ULP_PAD_PTE11__SDHC1_RESET_b                              = IOMUX_PAD(0x012C, 0x012C, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE11__FB_A20                                     = IOMUX_PAD(0x012C, 0x012C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE12__PTE12                                      = IOMUX_PAD(0x0130, 0x0130, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE12__FXIO1_D19                                  = IOMUX_PAD(0x0130, 0x0130, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE12__LPSPI3_SIN                                 = IOMUX_PAD(0x0130, 0x0130, 0x3, 0x0324, 0x2, 0),
+	MX7ULP_PAD_PTE12__LPUART7_CTS_b                              = IOMUX_PAD(0x0130, 0x0130, 0x4, 0x0268, 0x2, 0),
+	MX7ULP_PAD_PTE12__LPI2C7_SCL                                 = IOMUX_PAD(0x0130, 0x0130, 0x5, 0x0308, 0x2, 0),
+	MX7ULP_PAD_PTE12__TPM7_CH2                                   = IOMUX_PAD(0x0130, 0x0130, 0x6, 0x02E4, 0x2, 0),
+	MX7ULP_PAD_PTE12__SDHC1_WP                                   = IOMUX_PAD(0x0130, 0x0130, 0x8, 0x0200, 0x2, 0),
+	MX7ULP_PAD_PTE12__FB_A21                                     = IOMUX_PAD(0x0130, 0x0130, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE12__TRACE_D2                                   = IOMUX_PAD(0x0130, 0x0130, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE12__USB1_ULPI_OC2                              = IOMUX_PAD(0x0130, 0x0130, 0xb, 0x0334, 0x2, 0),
+	MX7ULP_PAD_PTE12__VIU_D20                                    = IOMUX_PAD(0x0130, 0x0130, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE13__PTE13                                      = IOMUX_PAD(0x0134, 0x0134, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE13__FXIO1_D18                                  = IOMUX_PAD(0x0134, 0x0134, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE13__LPSPI3_SOUT                                = IOMUX_PAD(0x0134, 0x0134, 0x3, 0x0328, 0x2, 0),
+	MX7ULP_PAD_PTE13__LPUART7_RTS_b                              = IOMUX_PAD(0x0134, 0x0134, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE13__LPI2C7_SDA                                 = IOMUX_PAD(0x0134, 0x0134, 0x5, 0x030C, 0x2, 0),
+	MX7ULP_PAD_PTE13__TPM6_CLKIN                                 = IOMUX_PAD(0x0134, 0x0134, 0x6, 0x02D8, 0x2, 0),
+	MX7ULP_PAD_PTE13__SDHC1_CD                                   = IOMUX_PAD(0x0134, 0x0134, 0x8, 0x032C, 0x2, 0),
+	MX7ULP_PAD_PTE13__FB_A22                                     = IOMUX_PAD(0x0134, 0x0134, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE13__TRACE_D1                                   = IOMUX_PAD(0x0134, 0x0134, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE13__USB1_ULPI_PWR2                             = IOMUX_PAD(0x0134, 0x0134, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE13__VIU_D21                                    = IOMUX_PAD(0x0134, 0x0134, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE14__PTE14                                      = IOMUX_PAD(0x0138, 0x0138, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE14__FXIO1_D17                                  = IOMUX_PAD(0x0138, 0x0138, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE14__LPSPI3_SCK                                 = IOMUX_PAD(0x0138, 0x0138, 0x3, 0x0320, 0x2, 0),
+	MX7ULP_PAD_PTE14__LPUART7_TX                                 = IOMUX_PAD(0x0138, 0x0138, 0x4, 0x0270, 0x2, 0),
+	MX7ULP_PAD_PTE14__LPI2C7_HREQ                                = IOMUX_PAD(0x0138, 0x0138, 0x5, 0x0304, 0x2, 0),
+	MX7ULP_PAD_PTE14__TPM6_CH0                                   = IOMUX_PAD(0x0138, 0x0138, 0x6, 0x02D0, 0x2, 0),
+	MX7ULP_PAD_PTE14__SDHC1_VS                                   = IOMUX_PAD(0x0138, 0x0138, 0x8, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE14__FB_A23                                     = IOMUX_PAD(0x0138, 0x0138, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE14__TRACE_D0                                   = IOMUX_PAD(0x0138, 0x0138, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE14__USB0_OC                                    = IOMUX_PAD(0x0138, 0x0138, 0xb, 0x0330, 0x2, 0),
+	MX7ULP_PAD_PTE14__VIU_D22                                    = IOMUX_PAD(0x0138, 0x0138, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE15__PTE15                                      = IOMUX_PAD(0x013C, 0x013C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE15__FXIO1_D16                                  = IOMUX_PAD(0x013C, 0x013C, 0x2, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE15__LPSPI3_PCS0                                = IOMUX_PAD(0x013C, 0x013C, 0x3, 0x0310, 0x2, 0),
+	MX7ULP_PAD_PTE15__LPUART7_RX                                 = IOMUX_PAD(0x013C, 0x013C, 0x4, 0x026C, 0x2, 0),
+	MX7ULP_PAD_PTE15__TPM6_CH1                                   = IOMUX_PAD(0x013C, 0x013C, 0x6, 0x02D4, 0x2, 0),
+	MX7ULP_PAD_PTE15__FB_A24                                     = IOMUX_PAD(0x013C, 0x013C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE15__TRACE_CLKOUT                               = IOMUX_PAD(0x013C, 0x013C, 0xa, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE15__USB0_PWR                                   = IOMUX_PAD(0x013C, 0x013C, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTE15__VIU_D23                                    = IOMUX_PAD(0x013C, 0x013C, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF0__PTF0                                        = IOMUX_PAD(0x0180, 0x0180, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF0__LPUART4_CTS_b                               = IOMUX_PAD(0x0180, 0x0180, 0x4, 0x0244, 0x3, 0),
+	MX7ULP_PAD_PTF0__LPI2C4_SCL                                  = IOMUX_PAD(0x0180, 0x0180, 0x5, 0x0278, 0x3, 0),
+	MX7ULP_PAD_PTF0__TPM4_CLKIN                                  = IOMUX_PAD(0x0180, 0x0180, 0x6, 0x0298, 0x3, 0),
+	MX7ULP_PAD_PTF0__FB_RW_b                                     = IOMUX_PAD(0x0180, 0x0180, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF0__VIU_DE                                      = IOMUX_PAD(0x0180, 0x0180, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF1__PTF1                                        = IOMUX_PAD(0x0184, 0x0184, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF1__LPUART4_RTS_b                               = IOMUX_PAD(0x0184, 0x0184, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF1__LPI2C4_SDA                                  = IOMUX_PAD(0x0184, 0x0184, 0x5, 0x027C, 0x3, 0),
+	MX7ULP_PAD_PTF1__TPM4_CH0                                    = IOMUX_PAD(0x0184, 0x0184, 0x6, 0x0280, 0x3, 0),
+	MX7ULP_PAD_PTF1__CLKOUT                                      = IOMUX_PAD(0x0184, 0x0184, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF1__VIU_HSYNC                                   = IOMUX_PAD(0x0184, 0x0184, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF2__PTF2                                        = IOMUX_PAD(0x0188, 0x0188, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF2__LPUART4_TX                                  = IOMUX_PAD(0x0188, 0x0188, 0x4, 0x024C, 0x3, 0),
+	MX7ULP_PAD_PTF2__LPI2C4_HREQ                                 = IOMUX_PAD(0x0188, 0x0188, 0x5, 0x0274, 0x3, 0),
+	MX7ULP_PAD_PTF2__TPM4_CH1                                    = IOMUX_PAD(0x0188, 0x0188, 0x6, 0x0284, 0x3, 0),
+	MX7ULP_PAD_PTF2__FB_TSIZ1_FB_CS5_b_FB_BE23_16_BLS15_8_b      = IOMUX_PAD(0x0188, 0x0188, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF2__VIU_VSYNC                                   = IOMUX_PAD(0x0188, 0x0188, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF3__PTF3                                        = IOMUX_PAD(0x018C, 0x018C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF3__LPUART4_RX                                  = IOMUX_PAD(0x018C, 0x018C, 0x4, 0x0248, 0x3, 0),
+	MX7ULP_PAD_PTF3__TPM4_CH2                                    = IOMUX_PAD(0x018C, 0x018C, 0x6, 0x0288, 0x3, 0),
+	MX7ULP_PAD_PTF3__FB_AD16                                     = IOMUX_PAD(0x018C, 0x018C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF3__VIU_PCLK                                    = IOMUX_PAD(0x018C, 0x018C, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF4__PTF4                                        = IOMUX_PAD(0x0190, 0x0190, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF4__FXIO1_D0                                    = IOMUX_PAD(0x0190, 0x0190, 0x2, 0x0204, 0x2, 0),
+	MX7ULP_PAD_PTF4__LPSPI2_PCS1                                 = IOMUX_PAD(0x0190, 0x0190, 0x3, 0x02A0, 0x3, 0),
+	MX7ULP_PAD_PTF4__LPUART5_CTS_b                               = IOMUX_PAD(0x0190, 0x0190, 0x4, 0x0250, 0x3, 0),
+	MX7ULP_PAD_PTF4__LPI2C5_SCL                                  = IOMUX_PAD(0x0190, 0x0190, 0x5, 0x02BC, 0x3, 0),
+	MX7ULP_PAD_PTF4__TPM4_CH3                                    = IOMUX_PAD(0x0190, 0x0190, 0x6, 0x028C, 0x2, 0),
+	MX7ULP_PAD_PTF4__FB_AD17                                     = IOMUX_PAD(0x0190, 0x0190, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF4__VIU_D0                                      = IOMUX_PAD(0x0190, 0x0190, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF5__PTF5                                        = IOMUX_PAD(0x0194, 0x0194, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF5__FXIO1_D1                                    = IOMUX_PAD(0x0194, 0x0194, 0x2, 0x0208, 0x2, 0),
+	MX7ULP_PAD_PTF5__LPSPI2_PCS2                                 = IOMUX_PAD(0x0194, 0x0194, 0x3, 0x02A4, 0x3, 0),
+	MX7ULP_PAD_PTF5__LPUART5_RTS_b                               = IOMUX_PAD(0x0194, 0x0194, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF5__LPI2C5_SDA                                  = IOMUX_PAD(0x0194, 0x0194, 0x5, 0x02C0, 0x3, 0),
+	MX7ULP_PAD_PTF5__TPM4_CH4                                    = IOMUX_PAD(0x0194, 0x0194, 0x6, 0x0290, 0x2, 0),
+	MX7ULP_PAD_PTF5__FB_AD18                                     = IOMUX_PAD(0x0194, 0x0194, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF5__VIU_D1                                      = IOMUX_PAD(0x0194, 0x0194, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF6__PTF6                                        = IOMUX_PAD(0x0198, 0x0198, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF6__FXIO1_D2                                    = IOMUX_PAD(0x0198, 0x0198, 0x2, 0x020C, 0x2, 0),
+	MX7ULP_PAD_PTF6__LPSPI2_PCS3                                 = IOMUX_PAD(0x0198, 0x0198, 0x3, 0x02A8, 0x3, 0),
+	MX7ULP_PAD_PTF6__LPUART5_TX                                  = IOMUX_PAD(0x0198, 0x0198, 0x4, 0x0258, 0x3, 0),
+	MX7ULP_PAD_PTF6__LPI2C5_HREQ                                 = IOMUX_PAD(0x0198, 0x0198, 0x5, 0x02B8, 0x3, 0),
+	MX7ULP_PAD_PTF6__TPM4_CH5                                    = IOMUX_PAD(0x0198, 0x0198, 0x6, 0x0294, 0x2, 0),
+	MX7ULP_PAD_PTF6__FB_AD19                                     = IOMUX_PAD(0x0198, 0x0198, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF6__VIU_D2                                      = IOMUX_PAD(0x0198, 0x0198, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF7__PTF7                                        = IOMUX_PAD(0x019C, 0x019C, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF7__FXIO1_D3                                    = IOMUX_PAD(0x019C, 0x019C, 0x2, 0x0210, 0x2, 0),
+	MX7ULP_PAD_PTF7__LPUART5_RX                                  = IOMUX_PAD(0x019C, 0x019C, 0x4, 0x0254, 0x3, 0),
+	MX7ULP_PAD_PTF7__TPM5_CH1                                    = IOMUX_PAD(0x019C, 0x019C, 0x6, 0x02C8, 0x3, 0),
+	MX7ULP_PAD_PTF7__FB_AD20                                     = IOMUX_PAD(0x019C, 0x019C, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF7__VIU_D3                                      = IOMUX_PAD(0x019C, 0x019C, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF8__PTF8                                        = IOMUX_PAD(0x01A0, 0x01A0, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF8__FXIO1_D4                                    = IOMUX_PAD(0x01A0, 0x01A0, 0x2, 0x0214, 0x2, 0),
+	MX7ULP_PAD_PTF8__LPSPI2_SIN                                  = IOMUX_PAD(0x01A0, 0x01A0, 0x3, 0x02B0, 0x3, 0),
+	MX7ULP_PAD_PTF8__LPUART6_CTS_b                               = IOMUX_PAD(0x01A0, 0x01A0, 0x4, 0x025C, 0x3, 0),
+	MX7ULP_PAD_PTF8__LPI2C6_SCL                                  = IOMUX_PAD(0x01A0, 0x01A0, 0x5, 0x02FC, 0x3, 0),
+	MX7ULP_PAD_PTF8__TPM5_CLKIN                                  = IOMUX_PAD(0x01A0, 0x01A0, 0x6, 0x02CC, 0x3, 0),
+	MX7ULP_PAD_PTF8__FB_AD21                                     = IOMUX_PAD(0x01A0, 0x01A0, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF8__USB1_ULPI_CLK                               = IOMUX_PAD(0x01A0, 0x01A0, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF8__VIU_D4                                      = IOMUX_PAD(0x01A0, 0x01A0, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF9__PTF9                                        = IOMUX_PAD(0x01A4, 0x01A4, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF9__FXIO1_D5                                    = IOMUX_PAD(0x01A4, 0x01A4, 0x2, 0x0218, 0x2, 0),
+	MX7ULP_PAD_PTF9__LPSPI2_SOUT                                 = IOMUX_PAD(0x01A4, 0x01A4, 0x3, 0x02B4, 0x3, 0),
+	MX7ULP_PAD_PTF9__LPUART6_RTS_b                               = IOMUX_PAD(0x01A4, 0x01A4, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF9__LPI2C6_SDA                                  = IOMUX_PAD(0x01A4, 0x01A4, 0x5, 0x0300, 0x3, 0),
+	MX7ULP_PAD_PTF9__TPM5_CH0                                    = IOMUX_PAD(0x01A4, 0x01A4, 0x6, 0x02C4, 0x3, 0),
+	MX7ULP_PAD_PTF9__FB_AD22                                     = IOMUX_PAD(0x01A4, 0x01A4, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF9__USB1_ULPI_NXT                               = IOMUX_PAD(0x01A4, 0x01A4, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF9__VIU_D5                                      = IOMUX_PAD(0x01A4, 0x01A4, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF10__PTF10                                      = IOMUX_PAD(0x01A8, 0x01A8, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF10__FXIO1_D6                                   = IOMUX_PAD(0x01A8, 0x01A8, 0x2, 0x021C, 0x2, 0),
+	MX7ULP_PAD_PTF10__LPSPI2_SCK                                 = IOMUX_PAD(0x01A8, 0x01A8, 0x3, 0x02AC, 0x3, 0),
+	MX7ULP_PAD_PTF10__LPUART6_TX                                 = IOMUX_PAD(0x01A8, 0x01A8, 0x4, 0x0264, 0x3, 0),
+	MX7ULP_PAD_PTF10__LPI2C6_HREQ                                = IOMUX_PAD(0x01A8, 0x01A8, 0x5, 0x02F8, 0x3, 0),
+	MX7ULP_PAD_PTF10__TPM7_CH3                                   = IOMUX_PAD(0x01A8, 0x01A8, 0x6, 0x02E8, 0x3, 0),
+	MX7ULP_PAD_PTF10__FB_AD23                                    = IOMUX_PAD(0x01A8, 0x01A8, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF10__USB1_ULPI_STP                              = IOMUX_PAD(0x01A8, 0x01A8, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF10__VIU_D6                                     = IOMUX_PAD(0x01A8, 0x01A8, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF11__PTF11                                      = IOMUX_PAD(0x01AC, 0x01AC, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF11__FXIO1_D7                                   = IOMUX_PAD(0x01AC, 0x01AC, 0x2, 0x0220, 0x2, 0),
+	MX7ULP_PAD_PTF11__LPSPI2_PCS0                                = IOMUX_PAD(0x01AC, 0x01AC, 0x3, 0x029C, 0x3, 0),
+	MX7ULP_PAD_PTF11__LPUART6_RX                                 = IOMUX_PAD(0x01AC, 0x01AC, 0x4, 0x0260, 0x3, 0),
+	MX7ULP_PAD_PTF11__TPM7_CH4                                   = IOMUX_PAD(0x01AC, 0x01AC, 0x6, 0x02EC, 0x3, 0),
+	MX7ULP_PAD_PTF11__FB_CS4_b_FB_TSIZ0_FB_BE31_24_BLS7_0_b      = IOMUX_PAD(0x01AC, 0x01AC, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF11__USB1_ULPI_DIR                              = IOMUX_PAD(0x01AC, 0x01AC, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF11__VIU_D7                                     = IOMUX_PAD(0x01AC, 0x01AC, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF12__PTF12                                      = IOMUX_PAD(0x01B0, 0x01B0, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF12__FXIO1_D8                                   = IOMUX_PAD(0x01B0, 0x01B0, 0x2, 0x0224, 0x2, 0),
+	MX7ULP_PAD_PTF12__LPSPI3_PCS1                                = IOMUX_PAD(0x01B0, 0x01B0, 0x3, 0x0314, 0x3, 0),
+	MX7ULP_PAD_PTF12__LPUART7_CTS_b                              = IOMUX_PAD(0x01B0, 0x01B0, 0x4, 0x0268, 0x3, 0),
+	MX7ULP_PAD_PTF12__LPI2C7_SCL                                 = IOMUX_PAD(0x01B0, 0x01B0, 0x5, 0x0308, 0x3, 0),
+	MX7ULP_PAD_PTF12__TPM7_CH5                                   = IOMUX_PAD(0x01B0, 0x01B0, 0x6, 0x02F0, 0x3, 0),
+	MX7ULP_PAD_PTF12__FB_AD24                                    = IOMUX_PAD(0x01B0, 0x01B0, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF12__USB1_ULPI_DATA0                            = IOMUX_PAD(0x01B0, 0x01B0, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF12__VIU_D8                                     = IOMUX_PAD(0x01B0, 0x01B0, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF13__PTF13                                      = IOMUX_PAD(0x01B4, 0x01B4, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF13__FXIO1_D9                                   = IOMUX_PAD(0x01B4, 0x01B4, 0x2, 0x0228, 0x2, 0),
+	MX7ULP_PAD_PTF13__LPSPI3_PCS2                                = IOMUX_PAD(0x01B4, 0x01B4, 0x3, 0x0318, 0x3, 0),
+	MX7ULP_PAD_PTF13__LPUART7_RTS_b                              = IOMUX_PAD(0x01B4, 0x01B4, 0x4, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF13__LPI2C7_SDA                                 = IOMUX_PAD(0x01B4, 0x01B4, 0x5, 0x030C, 0x3, 0),
+	MX7ULP_PAD_PTF13__TPM7_CLKIN                                 = IOMUX_PAD(0x01B4, 0x01B4, 0x6, 0x02F4, 0x3, 0),
+	MX7ULP_PAD_PTF13__FB_AD25                                    = IOMUX_PAD(0x01B4, 0x01B4, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF13__USB1_ULPI_DATA1                            = IOMUX_PAD(0x01B4, 0x01B4, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF13__VIU_D9                                     = IOMUX_PAD(0x01B4, 0x01B4, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF14__PTF14                                      = IOMUX_PAD(0x01B8, 0x01B8, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF14__FXIO1_D10                                  = IOMUX_PAD(0x01B8, 0x01B8, 0x2, 0x022C, 0x2, 0),
+	MX7ULP_PAD_PTF14__LPSPI3_PCS3                                = IOMUX_PAD(0x01B8, 0x01B8, 0x3, 0x031C, 0x3, 0),
+	MX7ULP_PAD_PTF14__LPUART7_TX                                 = IOMUX_PAD(0x01B8, 0x01B8, 0x4, 0x0270, 0x3, 0),
+	MX7ULP_PAD_PTF14__LPI2C7_HREQ                                = IOMUX_PAD(0x01B8, 0x01B8, 0x5, 0x0304, 0x3, 0),
+	MX7ULP_PAD_PTF14__TPM7_CH0                                   = IOMUX_PAD(0x01B8, 0x01B8, 0x6, 0x02DC, 0x3, 0),
+	MX7ULP_PAD_PTF14__FB_AD26                                    = IOMUX_PAD(0x01B8, 0x01B8, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF14__USB1_ULPI_DATA2                            = IOMUX_PAD(0x01B8, 0x01B8, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF14__VIU_D10                                    = IOMUX_PAD(0x01B8, 0x01B8, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF15__PTF15                                      = IOMUX_PAD(0x01BC, 0x01BC, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF15__FXIO1_D11                                  = IOMUX_PAD(0x01BC, 0x01BC, 0x2, 0x0230, 0x2, 0),
+	MX7ULP_PAD_PTF15__LPUART7_RX                                 = IOMUX_PAD(0x01BC, 0x01BC, 0x4, 0x026C, 0x3, 0),
+	MX7ULP_PAD_PTF15__TPM7_CH1                                   = IOMUX_PAD(0x01BC, 0x01BC, 0x6, 0x02E0, 0x3, 0),
+	MX7ULP_PAD_PTF15__FB_AD27                                    = IOMUX_PAD(0x01BC, 0x01BC, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF15__USB1_ULPI_DATA3                            = IOMUX_PAD(0x01BC, 0x01BC, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF15__VIU_D11                                    = IOMUX_PAD(0x01BC, 0x01BC, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF16__PTF16                                      = IOMUX_PAD(0x01C0, 0x01C0, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF16__USB1_ULPI_DATA4                            = IOMUX_PAD(0x01C0, 0x01C0, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF16__VIU_D12                                    = IOMUX_PAD(0x01C0, 0x01C0, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF16__FXIO1_D12                                  = IOMUX_PAD(0x01C0, 0x01C0, 0x2, 0x0234, 0x2, 0),
+	MX7ULP_PAD_PTF16__LPSPI3_SIN                                 = IOMUX_PAD(0x01C0, 0x01C0, 0x3, 0x0324, 0x3, 0),
+	MX7ULP_PAD_PTF16__TPM7_CH2                                   = IOMUX_PAD(0x01C0, 0x01C0, 0x6, 0x02E4, 0x3, 0),
+	MX7ULP_PAD_PTF16__FB_AD28                                    = IOMUX_PAD(0x01C0, 0x01C0, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF17__PTF17                                      = IOMUX_PAD(0x01C4, 0x01C4, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF17__USB1_ULPI_DATA5                            = IOMUX_PAD(0x01C4, 0x01C4, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF17__VIU_D13                                    = IOMUX_PAD(0x01C4, 0x01C4, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF17__FXIO1_D13                                  = IOMUX_PAD(0x01C4, 0x01C4, 0x2, 0x0238, 0x2, 0),
+	MX7ULP_PAD_PTF17__LPSPI3_SOUT                                = IOMUX_PAD(0x01C4, 0x01C4, 0x3, 0x0328, 0x3, 0),
+	MX7ULP_PAD_PTF17__TPM6_CLKIN                                 = IOMUX_PAD(0x01C4, 0x01C4, 0x6, 0x02D8, 0x3, 0),
+	MX7ULP_PAD_PTF17__FB_AD29                                    = IOMUX_PAD(0x01C4, 0x01C4, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF18__PTF18                                      = IOMUX_PAD(0x01C8, 0x01C8, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF18__USB1_ULPI_DATA6                            = IOMUX_PAD(0x01C8, 0x01C8, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF18__VIU_D14                                    = IOMUX_PAD(0x01C8, 0x01C8, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF18__FXIO1_D14                                  = IOMUX_PAD(0x01C8, 0x01C8, 0x2, 0x023C, 0x2, 0),
+	MX7ULP_PAD_PTF18__LPSPI3_SCK                                 = IOMUX_PAD(0x01C8, 0x01C8, 0x3, 0x0320, 0x3, 0),
+	MX7ULP_PAD_PTF18__TPM6_CH0                                   = IOMUX_PAD(0x01C8, 0x01C8, 0x6, 0x02D0, 0x3, 0),
+	MX7ULP_PAD_PTF18__FB_AD30                                    = IOMUX_PAD(0x01C8, 0x01C8, 0x9, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF19__PTF19                                      = IOMUX_PAD(0x01CC, 0x01CC, 0x1, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF19__USB1_ULPI_DATA7                            = IOMUX_PAD(0x01CC, 0x01CC, 0xb, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF19__VIU_D15                                    = IOMUX_PAD(0x01CC, 0x01CC, 0xc, 0x0000, 0x0, 0),
+	MX7ULP_PAD_PTF19__FXIO1_D15                                  = IOMUX_PAD(0x01CC, 0x01CC, 0x2, 0x0240, 0x2, 0),
+	MX7ULP_PAD_PTF19__LPSPI3_PCS0                                = IOMUX_PAD(0x01CC, 0x01CC, 0x3, 0x0310, 0x3, 0),
+	MX7ULP_PAD_PTF19__TPM6_CH1                                   = IOMUX_PAD(0x01CC, 0x01CC, 0x6, 0x02D4, 0x3, 0),
+	MX7ULP_PAD_PTF19__FB_AD31                                    = IOMUX_PAD(0x01CC, 0x01CC, 0x9, 0x0000, 0x0, 0),
+};
+#endif  /* __ASM_ARCH_IMX7ULP_PINS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S
new file mode 100644
index 000000000..bcc804b58
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <config.h>
+
+#define ROM_API_TABLE_BASE_ADDR_LEGACY		0x180
+#define ROM_VERSION_OFFSET               	0x80
+#define ROM_API_HWCNFG_SETUP_OFFSET		0x08
+
+plugin_start:
+
+	push    {r0-r4, lr}
+
+	imx7ulp_ddr_setting
+	imx7ulp_clock_gating
+	imx7ulp_qos_setting
+
+normal_boot:
+
+/*
+ * The following is to fill in those arguments for this ROM function
+ * pu_irom_hwcnfg_setup(void **start, size_t *bytes, const void *boot_data)
+ * This function is used to copy data from the storage media into DDR.
+ * start - Initial (possibly partial) image load address on entry.
+ *         Final image load address on exit.
+ * bytes - Initial (possibly partial) image size on entry.
+ *         Final image size on exit.
+ * boot_data - Initial @ref ivt Boot Data load address.
+ */
+	adr r0, boot_data2
+	adr r1, image_len2
+	adr r2, boot_data2
+
+/*
+ * check the _pu_irom_api_table for the address
+ */
+before_calling_rom___pu_irom_hwcnfg_setup:
+	ldr r3, =ROM_VERSION_OFFSET
+	ldr r4, [r3]
+	ldr r3, =ROM_API_TABLE_BASE_ADDR_LEGACY
+	ldr r4, [r3, #ROM_API_HWCNFG_SETUP_OFFSET]
+	blx r4
+after_calling_rom___pu_irom_hwcnfg_setup:
+
+/*
+ * To return to ROM from plugin, we need to fill in these argument.
+ * Here is what need to do:
+ * Need to construct the parameters for this function before return to ROM:
+ * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset)
+ */
+	pop {r0-r4, lr}
+	push {r5}
+	ldr r5, boot_data2
+	str r5, [r0]
+	ldr r5, image_len2
+	str r5, [r1]
+	ldr r5, second_ivt_offset
+	str r5, [r2]
+	mov r0, #1
+	pop {r5}
+
+	/* return back to ROM code */
+	bx lr
+
+/* make the following data right in the end of the output*/
+.ltorg
+
+#define FLASH_OFFSET 0x400
+
+/*
+ * second_ivt_offset is the offset from the "second_ivt_header" to
+ * "image_copy_start", which involves FLASH_OFFSET, plus the first
+ * ivt_header, the plugin code size itself recorded by "ivt2_header"
+ */
+
+second_ivt_offset:      .long (ivt2_header + 0x2C + FLASH_OFFSET)
+
+/*
+ * The following is the second IVT header plus the second boot data
+ */
+ivt2_header:            .long 0x0
+app2_code_jump_v:       .long 0x0
+reserv3:                .long 0x0
+dcd2_ptr:               .long 0x0
+boot_data2_ptr:         .long 0x0
+self_ptr2:              .long 0x0
+app_code_csf2:          .long 0x0
+reserv4:                .long 0x0
+boot_data2:             .long 0x0
+image_len2:             .long 0x0
+plugin2:                .long 0x0
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/pcc.h b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/pcc.h
new file mode 100644
index 000000000..8f0d70062
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/pcc.h
@@ -0,0 +1,371 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _ASM_ARCH_PCC_H
+#define _ASM_ARCH_PCC_H
+
+#include <asm/arch/scg.h>
+
+/* PCC2 */
+
+enum pcc2_entry {
+	/* On-Platform (32 entries) */
+	RSVD0_PCC2_SLOT			= 0,
+	RSVD1_PCC2_SLOT			= 1,
+	CA7_GIC_PCC2_SLOT		= 2,
+	RSVD3_PCC2_SLOT			= 3,
+	RSVD4_PCC2_SLOT			= 4,
+	RSVD5_PCC2_SLOT			= 5,
+	RSVD6_PCC2_SLOT			= 6,
+	RSVD7_PCC2_SLOT			= 7,
+	DMA1_PCC2_SLOT			= 8,
+	RSVD9_PCC2_SLOT			= 9,
+	RSVD10_PCC2_SLOT		= 10,
+	RSVD11_PCC2_SLOT		= 11,
+	RSVD12_PCC2_SLOT		= 12,
+	RSVD13_PCC2_SLOT		= 13,
+	RSVD14_PCC2_SLOT		= 14,
+	RGPIO1_PCC2_SLOT		= 15,
+	FLEXBUS0_PCC2_SLOT		= 16,
+	RSVD17_PCC2_SLOT		= 17,
+	RSVD18_PCC2_SLOT		= 18,
+	RSVD19_PCC2_SLOT		= 19,
+	RSVD20_PCC2_SLOT		= 20,
+	RSVD21_PCC2_SLOT		= 21,
+	RSVD22_PCC2_SLOT		= 22,
+	RSVD23_PCC2_SLOT		= 23,
+	RSVD24_PCC2_SLOT		= 24,
+	RSVD25_PCC2_SLOT		= 25,
+	RSVD26_PCC2_SLOT		= 26,
+	SEMA42_1_PCC2_SLOT		= 27,
+	RSVD28_PCC2_SLOT		= 28,
+	RSVD29_PCC2_SLOT		= 29,
+	RSVD30_PCC2_SLOT		= 30,
+	RSVD31_PCC2_SLOT		= 31,
+
+	/* Off-Platform (96 entries) */
+	RSVD32_PCC2_SLOT		= 32,
+	DMA1_CH_MUX0_PCC2_SLOT		= 33,
+	MU_B_PCC2_SLOT			= 34,
+	SNVS_PCC2_SLOT			= 35,
+	CAAM_PCC2_SLOT			= 36,
+	LPTPM4_PCC2_SLOT		= 37,
+	LPTPM5_PCC2_SLOT		= 38,
+	LPIT1_PCC2_SLOT			= 39,
+	RSVD40_PCC2_SLOT		= 40,
+	LPSPI2_PCC2_SLOT		= 41,
+	LPSPI3_PCC2_SLOT		= 42,
+	LPI2C4_PCC2_SLOT		= 43,
+	LPI2C5_PCC2_SLOT		= 44,
+	LPUART4_PCC2_SLOT		= 45,
+	LPUART5_PCC2_SLOT		= 46,
+	RSVD47_PCC2_SLOT		= 47,
+	RSVD48_PCC2_SLOT		= 48,
+	FLEXIO1_PCC2_SLOT		= 49,
+	RSVD50_PCC2_SLOT		= 50,
+	USBOTG0_PCC2_SLOT		= 51,
+	USBOTG1_PCC2_SLOT		= 52,
+	USBPHY_PCC2_SLOT		= 53,
+	USB_PL301_PCC2_SLOT		= 54,
+	USDHC0_PCC2_SLOT		= 55,
+	USDHC1_PCC2_SLOT		= 56,
+	RSVD57_PCC2_SLOT		= 57,
+	TRGMUX1_PCC2_SLOT		= 58,
+	RSVD59_PCC2_SLOT		= 59,
+	RSVD60_PCC2_SLOT		= 60,
+	WDG1_PCC2_SLOT			= 61,
+	SCG1_PCC2_SLOT			= 62,
+	PCC2_PCC2_SLOT			= 63,
+	PMC1_PCC2_SLOT			= 64,
+	SMC1_PCC2_SLOT			= 65,
+	RCM1_PCC2_SLOT			= 66,
+	WDG2_PCC2_SLOT			= 67,
+	RSVD68_PCC2_SLOT		= 68,
+	TEST_SPACE1_PCC2_SLOT		= 69,
+	TEST_SPACE2_PCC2_SLOT		= 70,
+	TEST_SPACE3_PCC2_SLOT		= 71,
+	RSVD72_PCC2_SLOT		= 72,
+	RSVD73_PCC2_SLOT		= 73,
+	RSVD74_PCC2_SLOT		= 74,
+	RSVD75_PCC2_SLOT		= 75,
+	RSVD76_PCC2_SLOT		= 76,
+	RSVD77_PCC2_SLOT		= 77,
+	RSVD78_PCC2_SLOT		= 78,
+	RSVD79_PCC2_SLOT		= 79,
+	RSVD80_PCC2_SLOT		= 80,
+	RSVD81_PCC2_SLOT		= 81,
+	RSVD82_PCC2_SLOT		= 82,
+	RSVD83_PCC2_SLOT		= 83,
+	RSVD84_PCC2_SLOT		= 84,
+	RSVD85_PCC2_SLOT		= 85,
+	RSVD86_PCC2_SLOT		= 86,
+	RSVD87_PCC2_SLOT		= 87,
+	RSVD88_PCC2_SLOT		= 88,
+	RSVD89_PCC2_SLOT		= 89,
+	RSVD90_PCC2_SLOT		= 90,
+	RSVD91_PCC2_SLOT		= 91,
+	RSVD92_PCC2_SLOT		= 92,
+	RSVD93_PCC2_SLOT		= 93,
+	RSVD94_PCC2_SLOT		= 94,
+	RSVD95_PCC2_SLOT		= 95,
+	RSVD96_PCC2_SLOT		= 96,
+	RSVD97_PCC2_SLOT		= 97,
+	RSVD98_PCC2_SLOT		= 98,
+	RSVD99_PCC2_SLOT		= 99,
+	RSVD100_PCC2_SLOT		= 100,
+	RSVD101_PCC2_SLOT		= 101,
+	RSVD102_PCC2_SLOT		= 102,
+	RSVD103_PCC2_SLOT		= 103,
+	RSVD104_PCC2_SLOT		= 104,
+	RSVD105_PCC2_SLOT		= 105,
+	RSVD106_PCC2_SLOT		= 106,
+	RSVD107_PCC2_SLOT		= 107,
+	RSVD108_PCC2_SLOT		= 108,
+	RSVD109_PCC2_SLOT		= 109,
+	RSVD110_PCC2_SLOT		= 110,
+	RSVD111_PCC2_SLOT		= 111,
+	RSVD112_PCC2_SLOT		= 112,
+	RSVD113_PCC2_SLOT		= 113,
+	RSVD114_PCC2_SLOT		= 114,
+	RSVD115_PCC2_SLOT		= 115,
+	RSVD116_PCC2_SLOT		= 116,
+	RSVD117_PCC2_SLOT		= 117,
+	RSVD118_PCC2_SLOT		= 118,
+	RSVD119_PCC2_SLOT		= 119,
+	RSVD120_PCC2_SLOT		= 120,
+	RSVD121_PCC2_SLOT		= 121,
+	RSVD122_PCC2_SLOT		= 122,
+	RSVD123_PCC2_SLOT		= 123,
+	RSVD124_PCC2_SLOT		= 124,
+	RSVD125_PCC2_SLOT		= 125,
+	RSVD126_PCC2_SLOT		= 126,
+	RSVD127_PCC2_SLOT		= 127,
+};
+
+enum pcc3_entry {
+	/* On-Platform (32 entries) */
+	RSVD0_PCC3_SLOT			= 0,
+	RSVD1_PCC3_SLOT			= 1,
+	RSVD2_PCC3_SLOT			= 2,
+	RSVD3_PCC3_SLOT			= 3,
+	RSVD4_PCC3_SLOT			= 4,
+	RSVD5_PCC3_SLOT			= 5,
+	RSVD6_PCC3_SLOT			= 6,
+	RSVD7_PCC3_SLOT			= 7,
+	RSVD8_PCC3_SLOT			= 8,
+	RSVD9_PCC3_SLOT			= 9,
+	RSVD10_PCC3_SLOT		= 10,
+	RSVD11_PCC3_SLOT		= 11,
+	RSVD12_PCC3_SLOT		= 12,
+	RSVD13_PCC3_SLOT		= 13,
+	RSVD14_PCC3_SLOT		= 14,
+	RSVD15_PCC3_SLOT		= 15,
+	ROMCP1_PCC3_SLOT		= 16,
+	RSVD17_PCC3_SLOT		= 17,
+	RSVD18_PCC3_SLOT		= 18,
+	RSVD19_PCC3_SLOT		= 19,
+	RSVD20_PCC3_SLOT		= 20,
+	RSVD21_PCC3_SLOT		= 21,
+	RSVD22_PCC3_SLOT		= 22,
+	RSVD23_PCC3_SLOT		= 23,
+	RSVD24_PCC3_SLOT		= 24,
+	RSVD25_PCC3_SLOT		= 25,
+	RSVD26_PCC3_SLOT		= 26,
+	RSVD27_PCC3_SLOT		= 27,
+	RSVD28_PCC3_SLOT		= 28,
+	RSVD29_PCC3_SLOT		= 29,
+	RSVD30_PCC3_SLOT		= 30,
+	RSVD31_PCC3_SLOT		= 31,
+
+	/* Off-Platform (96 entries) */
+	RSVD32_PCC3_SLOT		= 32,
+	LPTPM6_PCC3_SLOT		= 33,
+	LPTPM7_PCC3_SLOT		= 34,
+	RSVD35_PCC3_SLOT		= 35,
+	LPI2C6_PCC3_SLOT		= 36,
+	LPI2C7_PCC3_SLOT		= 37,
+	LPUART6_PCC3_SLOT		= 38,
+	LPUART7_PCC3_SLOT		= 39,
+	VIU0_PCC3_SLOT			= 40,
+	DSI0_PCC3_SLOT			= 41,
+	LCDIF0_PCC3_SLOT		= 42,
+	MMDC0_PCC3_SLOT			= 43,
+	IOMUXC1_PCC3_SLOT		= 44,
+	IOMUXC_DDR_PCC3_SLOT		= 45,
+	PORTC_PCC3_SLOT			= 46,
+	PORTD_PCC3_SLOT			= 47,
+	PORTE_PCC3_SLOT			= 48,
+	PORTF_PCC3_SLOT			= 49,
+	RSVD50_PCC3_SLOT		= 50,
+	PCC3_PCC3_SLOT			= 51,
+	RSVD52_PCC3_SLOT		= 52,
+	WKPU_PCC3_SLOT			= 53,
+	RSVD54_PCC3_SLOT		= 54,
+	RSVD55_PCC3_SLOT		= 55,
+	RSVD56_PCC3_SLOT		= 56,
+	RSVD57_PCC3_SLOT		= 57,
+	RSVD58_PCC3_SLOT		= 58,
+	RSVD59_PCC3_SLOT		= 59,
+	RSVD60_PCC3_SLOT		= 60,
+	RSVD61_PCC3_SLOT		= 61,
+	RSVD62_PCC3_SLOT		= 62,
+	RSVD63_PCC3_SLOT		= 63,
+	RSVD64_PCC3_SLOT		= 64,
+	RSVD65_PCC3_SLOT		= 65,
+	RSVD66_PCC3_SLOT		= 66,
+	RSVD67_PCC3_SLOT		= 67,
+	RSVD68_PCC3_SLOT		= 68,
+	RSVD69_PCC3_SLOT		= 69,
+	RSVD70_PCC3_SLOT		= 70,
+	RSVD71_PCC3_SLOT		= 71,
+	RSVD72_PCC3_SLOT		= 72,
+	RSVD73_PCC3_SLOT		= 73,
+	RSVD74_PCC3_SLOT		= 74,
+	RSVD75_PCC3_SLOT		= 75,
+	RSVD76_PCC3_SLOT		= 76,
+	RSVD77_PCC3_SLOT		= 77,
+	RSVD78_PCC3_SLOT		= 78,
+	RSVD79_PCC3_SLOT		= 79,
+	RSVD80_PCC3_SLOT		= 80,
+	GPU3D_PCC3_SLOT			= 81,
+	GPU2D_PCC3_SLOT			= 82,
+	RSVD83_PCC3_SLOT		= 83,
+	RSVD84_PCC3_SLOT		= 84,
+	RSVD85_PCC3_SLOT		= 85,
+	RSVD86_PCC3_SLOT		= 86,
+	RSVD87_PCC3_SLOT		= 87,
+	RSVD88_PCC3_SLOT		= 88,
+	RSVD89_PCC3_SLOT		= 89,
+	RSVD90_PCC3_SLOT		= 90,
+	RSVD91_PCC3_SLOT		= 91,
+	RSVD92_PCC3_SLOT		= 92,
+	RSVD93_PCC3_SLOT		= 93,
+	RSVD94_PCC3_SLOT		= 94,
+	RSVD95_PCC3_SLOT		= 95,
+	RSVD96_PCC3_SLOT		= 96,
+	RSVD97_PCC3_SLOT		= 97,
+	RSVD98_PCC3_SLOT		= 98,
+	RSVD99_PCC3_SLOT		= 99,
+	RSVD100_PCC3_SLOT		= 100,
+	RSVD101_PCC3_SLOT		= 101,
+	RSVD102_PCC3_SLOT		= 102,
+	RSVD103_PCC3_SLOT		= 103,
+	RSVD104_PCC3_SLOT		= 104,
+	RSVD105_PCC3_SLOT		= 105,
+	RSVD106_PCC3_SLOT		= 106,
+	RSVD107_PCC3_SLOT		= 107,
+	RSVD108_PCC3_SLOT		= 108,
+	RSVD109_PCC3_SLOT		= 109,
+	RSVD110_PCC3_SLOT		= 110,
+	RSVD111_PCC3_SLOT		= 111,
+	RSVD112_PCC3_SLOT		= 112,
+	RSVD113_PCC3_SLOT		= 113,
+	RSVD114_PCC3_SLOT		= 114,
+	RSVD115_PCC3_SLOT		= 115,
+	RSVD116_PCC3_SLOT		= 116,
+	RSVD117_PCC3_SLOT		= 117,
+	RSVD118_PCC3_SLOT		= 118,
+	RSVD119_PCC3_SLOT		= 119,
+	RSVD120_PCC3_SLOT		= 120,
+	RSVD121_PCC3_SLOT		= 121,
+	RSVD122_PCC3_SLOT		= 122,
+	RSVD123_PCC3_SLOT		= 123,
+	RSVD124_PCC3_SLOT		= 124,
+	RSVD125_PCC3_SLOT		= 125,
+	RSVD126_PCC3_SLOT		= 126,
+	RSVD127_PCC3_SLOT		= 127,
+};
+
+
+/* PCC registers */
+#define PCC_PR_OFFSET	31
+#define PCC_PR_MASK		(0x1 << PCC_PR_OFFSET)
+#define PCC_CGC_OFFSET	30
+#define PCC_CGC_MASK	(0x1 << PCC_CGC_OFFSET)
+#define PCC_INUSE_OFFSET	29
+#define PCC_INUSE_MASK		(0x1 << PCC_INUSE_OFFSET)
+#define PCC_PCS_OFFSET	24
+#define PCC_PCS_MASK	(0x7 << PCC_PCS_OFFSET)
+#define PCC_FRAC_OFFSET	3
+#define PCC_FRAC_MASK	(0x1 << PCC_FRAC_OFFSET)
+#define PCC_PCD_OFFSET	0
+#define PCC_PCD_MASK	(0x7 << PCC_PCD_OFFSET)
+
+
+enum pcc_clksrc_type {
+	CLKSRC_PER_PLAT = 0,
+	CLKSRC_PER_BUS = 1,
+	CLKSRC_NO_PCS = 2,
+};
+
+enum pcc_div_type {
+	PCC_HAS_DIV,
+	PCC_NO_DIV,
+};
+
+/* All peripheral clocks on A7 PCCs */
+enum pcc_clk {
+	/*PCC2 clocks*/
+	PER_CLK_DMA1 = 0,
+	PER_CLK_RGPIO2P1,
+	PER_CLK_FLEXBUS,
+	PER_CLK_SEMA42_1,
+	PER_CLK_DMA_MUX1,
+	PER_CLK_SNVS,
+	PER_CLK_CAAM,
+	PER_CLK_LPTPM4,
+	PER_CLK_LPTPM5,
+	PER_CLK_LPIT1,
+	PER_CLK_LPSPI2,
+	PER_CLK_LPSPI3,
+	PER_CLK_LPI2C4,
+	PER_CLK_LPI2C5,
+	PER_CLK_LPUART4,
+	PER_CLK_LPUART5,
+	PER_CLK_FLEXIO1,
+	PER_CLK_USB0,
+	PER_CLK_USB1,
+	PER_CLK_USB_PHY,
+	PER_CLK_USB_PL301,
+	PER_CLK_USDHC0,
+	PER_CLK_USDHC1,
+	PER_CLK_WDG1,
+	PER_CLK_WDG2,
+
+	/*PCC3 clocks*/
+	PER_CLK_LPTPM6,
+	PER_CLK_LPTPM7,
+	PER_CLK_LPI2C6,
+	PER_CLK_LPI2C7,
+	PER_CLK_LPUART6,
+	PER_CLK_LPUART7,
+	PER_CLK_VIU,
+	PER_CLK_DSI,
+	PER_CLK_LCDIF,
+	PER_CLK_MMDC,
+	PER_CLK_PCTLC,
+	PER_CLK_PCTLD,
+	PER_CLK_PCTLE,
+	PER_CLK_PCTLF,
+	PER_CLK_GPU3D,
+	PER_CLK_GPU2D,
+};
+
+
+/* This structure keeps info for each pcc slot */
+struct pcc_entry {
+	u32 pcc_base;
+	u32 pcc_slot;
+	enum pcc_clksrc_type clksrc;
+	enum pcc_div_type div;
+};
+
+int pcc_clock_enable(enum pcc_clk clk, bool enable);
+int pcc_clock_sel(enum pcc_clk clk, enum scg_clk src);
+int pcc_clock_div_config(enum pcc_clk clk, bool frac, u8 div);
+bool pcc_clock_is_enable(enum pcc_clk clk);
+int pcc_clock_get_clksrc(enum pcc_clk clk, enum scg_clk *src);
+u32 pcc_clock_get_rate(enum pcc_clk clk);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/scg.h b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/scg.h
new file mode 100644
index 000000000..3b5b7f680
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/scg.h
@@ -0,0 +1,339 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _ASM_ARCH_SCG_H
+#define _ASM_ARCH_SCG_H
+
+#ifdef CONFIG_CLK_DEBUG
+#define clk_debug(fmt, args...)	printf(fmt, ##args)
+#else
+#define clk_debug(fmt, args...)
+#endif
+
+#define SCG_CCR_SCS_SHIFT		(24)
+#define SCG_CCR_SCS_MASK		((0xFUL) << SCG_CCR_SCS_SHIFT)
+#define SCG_CCR_DIVCORE_SHIFT		(16)
+#define SCG_CCR_DIVCORE_MASK		((0xFUL) << SCG_CCR_DIVCORE_SHIFT)
+#define SCG_CCR_DIVPLAT_SHIFT		(12)
+#define SCG_CCR_DIVPLAT_MASK		((0xFUL) << SCG_CCR_DIVPLAT_SHIFT)
+#define SCG_CCR_DIVEXT_SHIFT		(8)
+#define SCG_CCR_DIVEXT_MASK		((0xFUL) << SCG_CCR_DIVEXT_SHIFT)
+#define SCG_CCR_DIVBUS_SHIFT		(4)
+#define SCG_CCR_DIVBUS_MASK		((0xFUL) << SCG_CCR_DIVBUS_SHIFT)
+#define SCG_CCR_DIVSLOW_SHIFT		(0)
+#define SCG_CCR_DIVSLOW_MASK		((0xFUL) << SCG_CCR_DIVSLOW_SHIFT)
+
+/* SCG DDR Clock Control Register */
+#define SCG_DDRCCR_DDRCS_SHIFT		(24)
+#define SCG_DDRCCR_DDRCS_MASK		((0x1UL) << SCG_DDRCCR_DDRCS_SHIFT)
+
+#define SCG_DDRCCR_DDRDIV_SHIFT		(0)
+#define SCG_DDRCCR_DDRDIV_MASK		((0x7UL) << SCG_DDRCCR_DDRDIV_SHIFT)
+
+/* SCG NIC Clock Control Register */
+#define SCG_NICCCR_NICCS_SHIFT		(28)
+#define SCG_NICCCR_NICCS_MASK		((0x1UL) << SCG_NICCCR_NICCS_SHIFT)
+
+#define SCG_NICCCR_NIC0_DIV_SHIFT       (24)
+#define SCG_NICCCR_NIC0_DIV_MASK        ((0xFUL) << SCG_NICCCR_NIC0_DIV_SHIFT)
+
+#define SCG_NICCCR_GPU_DIV_SHIFT        (20)
+#define SCG_NICCCR_GPU_DIV_MASK         ((0xFUL) << SCG_NICCCR_GPU_DIV_SHIFT)
+
+#define SCG_NICCCR_NIC1_DIV_SHIFT       (16)
+#define SCG_NICCCR_NIC1_DIV_MASK        ((0xFUL) << SCG_NICCCR_NIC1_DIV_SHIFT)
+
+#define SCG_NICCCR_NIC1_DIVEXT_SHIFT    (8)
+#define SCG_NICCCR_NIC1_DIVEXT_MASK   ((0xFUL) << SCG_NICCCR_NIC1_DIVEXT_SHIFT)
+
+#define SCG_NICCCR_NIC1_DIVBUS_SHIFT    (4)
+#define SCG_NICCCR_NIC1_DIVBUS_MASK   ((0xFUL) << SCG_NICCCR_NIC1_DIVBUS_SHIFT)
+
+/* SCG NIC clock status register */
+#define SCG_NICCSR_NICCS_SHIFT          (28)
+#define SCG_NICCSR_NICCS_MASK           ((0x1UL) << SCG_NICCSR_NICCS_SHIFT)
+
+#define SCG_NICCSR_NIC0DIV_SHIFT        (24)
+#define SCG_NICCSR_NIC0DIV_MASK         ((0xFUL) << SCG_NICCSR_NIC0DIV_SHIFT)
+#define SCG_NICCSR_GPUDIV_SHIFT         (20)
+#define SCG_NICCSR_GPUDIV_MASK          ((0xFUL) << SCG_NICCSR_GPUDIV_SHIFT)
+#define SCG_NICCSR_NIC1DIV_SHIFT        (16)
+#define SCG_NICCSR_NIC1DIV_MASK         ((0xFUL) << SCG_NICCSR_NIC1DIV_SHIFT)
+#define SCG_NICCSR_NIC1EXTDIV_SHIFT     (8)
+#define SCG_NICCSR_NIC1EXTDIV_MASK      ((0xFUL) << SCG_NICCSR_NIC1EXTDIV_SHIFT)
+#define SCG_NICCSR_NIC1BUSDIV_SHIFT     (4)
+#define SCG_NICCSR_NIC1BUSDIV_MASK      ((0xFUL) << SCG_NICCSR_NIC1BUSDIV_SHIFT)
+
+/* SCG Slow IRC Control Status Register */
+#define SCG_SIRC_CSR_SIRCVLD_SHIFT      (24)
+#define SCG_SIRC_CSR_SIRCVLD_MASK       ((0x1UL) << SCG_SIRC_CSR_SIRCVLD_SHIFT)
+
+#define SCG_SIRC_CSR_SIRCEN_SHIFT       (0)
+#define SCG_SIRC_CSR_SIRCEN_MASK        ((0x1UL) << SCG_SIRC_CSR_SIRCEN_SHIFT)
+
+/* SCG Slow IRC Configuration Register */
+#define SCG_SIRCCFG_RANGE_SHIFT         (0)
+#define SCG_SIRCCFG_RANGE_MASK          ((0x1UL) << SCG_SIRCCFG_RANGE_SHIFT)
+#define SCG_SIRCCFG_RANGE_4M            ((0x0UL) << SCG_SIRCCFG_RANGE_SHIFT)
+#define SCG_SIRCCFG_RANGE_16M           ((0x1UL) << SCG_SIRCCFG_RANGE_SHIFT)
+
+/* SCG Slow IRC Divide Register */
+#define SCG_SIRCDIV_DIV3_SHIFT          (16)
+#define SCG_SIRCDIV_DIV3_MASK           ((0x7UL) << SCG_SIRCDIV_DIV3_SHIFT)
+
+#define SCG_SIRCDIV_DIV2_SHIFT          (8)
+#define SCG_SIRCDIV_DIV2_MASK           ((0x7UL) << SCG_SIRCDIV_DIV2_SHIFT)
+
+#define SCG_SIRCDIV_DIV1_SHIFT          (0)
+#define SCG_SIRCDIV_DIV1_MASK           ((0x7UL) << SCG_SIRCDIV_DIV1_SHIFT)
+/*
+ * FIRC/SIRC DIV1 ==> xIRC_PLAT_CLK
+ * FIRC/SIRC DIV2 ==> xIRC_BUS_CLK
+ * FIRC/SIRC DIV3 ==> xIRC_SLOW_CLK
+ */
+
+/* SCG Fast IRC Control Status Register */
+#define SCG_FIRC_CSR_FIRCVLD_SHIFT      (24)
+#define SCG_FIRC_CSR_FIRCVLD_MASK       ((0x1UL) << SCG_FIRC_CSR_FIRCVLD_SHIFT)
+
+#define SCG_FIRC_CSR_FIRCEN_SHIFT       (0)
+#define SCG_FIRC_CSR_FIRCEN_MASK        ((0x1UL) << SCG_FIRC_CSR_FIRCEN_SHIFT)
+
+/* SCG Fast IRC Divide Register */
+#define SCG_FIRCDIV_DIV3_SHIFT          (16)
+#define SCG_FIRCDIV_DIV3_MASK           ((0x7UL) << SCG_FIRCDIV_DIV3_SHIFT)
+
+#define SCG_FIRCDIV_DIV2_SHIFT          (8)
+#define SCG_FIRCDIV_DIV2_MASK           ((0x7UL) << SCG_FIRCDIV_DIV2_SHIFT)
+
+#define SCG_FIRCDIV_DIV1_SHIFT          (0)
+#define SCG_FIRCDIV_DIV1_MASK           ((0x7UL) << SCG_FIRCDIV_DIV1_SHIFT)
+
+#define SCG_FIRCCFG_RANGE_SHIFT         (0)
+#define SCG_FIRCCFG_RANGE_MASK          ((0x3UL) << SCG_FIRCCFG_RANGE_SHIFT)
+
+#define SCG_FIRCCFG_RANGE_SHIFT         (0)
+#define SCG_FIRCCFG_RANGE_48M           ((0x0UL) << SCG_FIRCCFG_RANGE_SHIFT)
+
+/* SCG System OSC Control Status Register */
+#define SCG_SOSC_CSR_SOSCVLD_SHIFT      (24)
+#define SCG_SOSC_CSR_SOSCVLD_MASK       ((0x1UL) << SCG_SOSC_CSR_SOSCVLD_SHIFT)
+
+/* SCG Fast IRC Divide Register */
+#define SCG_SOSCDIV_DIV3_SHIFT          (16)
+#define SCG_SOSCDIV_DIV3_MASK           ((0x7UL) << SCG_SOSCDIV_DIV3_SHIFT)
+
+#define SCG_SOSCDIV_DIV2_SHIFT          (8)
+#define SCG_SOSCDIV_DIV2_MASK           ((0x7UL) << SCG_SOSCDIV_DIV2_SHIFT)
+
+#define SCG_SOSCDIV_DIV1_SHIFT          (0)
+#define SCG_SOSCDIV_DIV1_MASK           ((0x7UL) << SCG_SOSCDIV_DIV1_SHIFT)
+
+/* SCG RTC OSC Control Status Register */
+#define SCG_ROSC_CSR_ROSCVLD_SHIFT      (24)
+#define SCG_ROSC_CSR_ROSCVLD_MASK       ((0x1UL) << SCG_ROSC_CSR_ROSCVLD_SHIFT)
+
+#define SCG_SPLL_CSR_SPLLVLD_SHIFT      (24)
+#define SCG_SPLL_CSR_SPLLVLD_MASK       ((0x1UL) << SCG_SPLL_CSR_SPLLVLD_SHIFT)
+#define SCG_SPLL_CSR_SPLLEN_SHIFT       (0)
+#define SCG_SPLL_CSR_SPLLEN_MASK        ((0x1UL) << SCG_SPLL_CSR_SPLLEN_SHIFT)
+#define SCG_APLL_CSR_APLLEN_SHIFT       (0)
+#define SCG_APLL_CSR_APLLEN_MASK        (0x1UL)
+#define SCG_APLL_CSR_APLLVLD_MASK       (0x01000000)
+
+#define SCG_UPLL_CSR_UPLLVLD_MASK       (0x01000000)
+
+
+#define SCG_PLL_PFD3_GATE_MASK          (0x80000000)
+#define SCG_PLL_PFD2_GATE_MASK          (0x00800000)
+#define SCG_PLL_PFD1_GATE_MASK          (0x00008000)
+#define SCG_PLL_PFD0_GATE_MASK          (0x00000080)
+#define SCG_PLL_PFD3_VALID_MASK         (0x40000000)
+#define SCG_PLL_PFD2_VALID_MASK         (0x00400000)
+#define SCG_PLL_PFD1_VALID_MASK         (0x00004000)
+#define SCG_PLL_PFD0_VALID_MASK         (0x00000040)
+
+#define SCG_PLL_PFD0_FRAC_SHIFT         (0)
+#define SCG_PLL_PFD0_FRAC_MASK          ((0x3F) << SCG_PLL_PFD0_FRAC_SHIFT)
+#define SCG_PLL_PFD1_FRAC_SHIFT         (8)
+#define SCG_PLL_PFD1_FRAC_MASK          ((0x3F) << SCG_PLL_PFD1_FRAC_SHIFT)
+#define SCG_PLL_PFD2_FRAC_SHIFT         (16)
+#define SCG_PLL_PFD2_FRAC_MASK          ((0x3F) << SCG_PLL_PFD2_FRAC_SHIFT)
+#define SCG_PLL_PFD3_FRAC_SHIFT         (24)
+#define SCG_PLL_PFD3_FRAC_MASK          ((0x3F) << SCG_PLL_PFD3_FRAC_SHIFT)
+
+#define SCG_PLL_CFG_POSTDIV2_SHIFT      (28)
+#define SCG_PLL_CFG_POSTDIV2_MASK       ((0xFUL) << SCG_PLL_CFG_POSTDIV2_SHIFT)
+#define SCG_PLL_CFG_POSTDIV1_SHIFT      (24)
+#define SCG_PLL_CFG_POSTDIV1_MASK       ((0xFUL) << SCG_PLL_CFG_POSTDIV1_SHIFT)
+#define SCG_PLL_CFG_MULT_SHIFT          (16)
+#define SCG1_SPLL_CFG_MULT_MASK         ((0x7FUL) << SCG_PLL_CFG_MULT_SHIFT)
+#define SCG_APLL_CFG_MULT_MASK          ((0x7FUL) << SCG_PLL_CFG_MULT_SHIFT)
+#define SCG_PLL_CFG_PFDSEL_SHIFT        (14)
+#define SCG_PLL_CFG_PFDSEL_MASK         ((0x3UL) << SCG_PLL_CFG_PFDSEL_SHIFT)
+#define SCG_PLL_CFG_PREDIV_SHIFT        (8)
+#define SCG_PLL_CFG_PREDIV_MASK         ((0x7UL) << SCG_PLL_CFG_PREDIV_SHIFT)
+#define SCG_PLL_CFG_BYPASS_SHIFT        (2)
+/* 0: SPLL, 1: bypass */
+#define SCG_PLL_CFG_BYPASS_MASK         ((0x1UL) << SCG_PLL_CFG_BYPASS_SHIFT)
+#define SCG_PLL_CFG_PLLSEL_SHIFT        (1)
+/* 0: pll, 1: pfd */
+#define SCG_PLL_CFG_PLLSEL_MASK         ((0x1UL) << SCG_PLL_CFG_PLLSEL_SHIFT)
+#define SCG_PLL_CFG_CLKSRC_SHIFT        (0)
+/* 0: Sys-OSC, 1: FIRC */
+#define SCG_PLL_CFG_CLKSRC_MASK         ((0x1UL) << SCG_PLL_CFG_CLKSRC_SHIFT)
+#define SCG0_SPLL_CFG_MULT_SHIFT        (17)
+/* 0: Multiplier = 20, 1: Multiplier = 22 */
+#define SCG0_SPLL_CFG_MULT_MASK         ((0x1UL) << SCG0_SPLL_CFG_MULT_SHIFT)
+
+#define PLL_USB_EN_USB_CLKS_MASK	(0x01 << 6)
+#define PLL_USB_PWR_MASK		(0x01 << 12)
+#define PLL_USB_ENABLE_MASK		(0x01 << 13)
+#define PLL_USB_BYPASS_MASK		(0x01 << 16)
+#define PLL_USB_REG_ENABLE_MASK		(0x01 << 21)
+#define PLL_USB_DIV_SEL_MASK		(0x07 << 22)
+#define PLL_USB_LOCK_MASK		(0x01 << 31)
+
+enum scg_clk {
+	SCG_SOSC_CLK,
+	SCG_FIRC_CLK,
+	SCG_SIRC_CLK,
+	SCG_ROSC_CLK,
+	SCG_SIRC_DIV1_CLK,
+	SCG_SIRC_DIV2_CLK,
+	SCG_SIRC_DIV3_CLK,
+	SCG_FIRC_DIV1_CLK,
+	SCG_FIRC_DIV2_CLK,
+	SCG_FIRC_DIV3_CLK,
+	SCG_SOSC_DIV1_CLK,
+	SCG_SOSC_DIV2_CLK,
+	SCG_SOSC_DIV3_CLK,
+	SCG_CORE_CLK,
+	SCG_BUS_CLK,
+	SCG_SPLL_PFD0_CLK,
+	SCG_SPLL_PFD1_CLK,
+	SCG_SPLL_PFD2_CLK,
+	SCG_SPLL_PFD3_CLK,
+	SCG_DDR_CLK,
+	SCG_NIC0_CLK,
+	SCG_GPU_CLK,
+	SCG_NIC1_CLK,
+	SCG_NIC1_BUS_CLK,
+	SCG_NIC1_EXT_CLK,
+	SCG_APLL_PFD0_CLK,
+	SCG_APLL_PFD1_CLK,
+	SCG_APLL_PFD2_CLK,
+	SCG_APLL_PFD3_CLK,
+	USB_PLL_OUT,
+	MIPI_PLL_OUT
+};
+
+enum scg_sys_src {
+	SCG_SCS_SYS_OSC = 1,
+	SCG_SCS_SLOW_IRC,
+	SCG_SCS_FAST_IRC,
+	SCG_SCS_RTC_OSC,
+	SCG_SCS_AUX_PLL,
+	SCG_SCS_SYS_PLL,
+	SCG_SCS_USBPHY_PLL,
+};
+
+/* PLL supported by i.mx7ulp */
+enum pll_clocks {
+	PLL_M4_SPLL,	/* M4 SPLL */
+	PLL_M4_APLL,	/* M4 APLL*/
+	PLL_A7_SPLL,	/* A7 SPLL */
+	PLL_A7_APLL,	/* A7 APLL */
+	PLL_USB,	/* USB PLL*/
+	PLL_MIPI,	/* MIPI PLL */
+};
+
+typedef struct scg_regs {
+	u32 verid;	/* VERSION_ID */
+	u32 param;	/*  PARAMETER */
+	u32 rsvd11[2];
+
+	u32 csr;	/*  Clock Status Register */
+	u32 rccr;	/*  Run Clock Control Register */
+	u32 vccr;	/*  VLPR Clock Control Register */
+	u32 hccr;	/*  HSRUN Clock Control Register */
+	u32 clkoutcnfg;	/*  SCG CLKOUT Configuration Register */
+	u32 rsvd12[3];
+	u32 ddrccr;	/*  SCG DDR Clock Control Register */
+	u32 rsvd13[3];
+	u32 nicccr;	/*  NIC Clock Control Register */
+	u32 niccsr;	/*  NIC Clock Status Register */
+	u32 rsvd10[46];
+
+	u32 sosccsr;	/*  System OSC Control Status Register, offset 0x100 */
+	u32 soscdiv;	/*  System OSC Divide Register */
+	u32 sosccfg;	/*  System Oscillator Configuration Register */
+	u32 sosctest;	/*  System Oscillator Test Register */
+	u32 rsvd20[60];
+
+	u32 sirccsr;	/*  Slow IRC Control Status Register, offset 0x200 */
+	u32 sircdiv;	/*  Slow IRC Divide Register */
+	u32 sirccfg;	/*  Slow IRC Configuration Register */
+	u32 sirctrim;	/*  Slow IRC Trim Register */
+	u32 loptrim;	/*  Low Power Oscillator Trim Register */
+	u32 sirctest;	/*  Slow IRC Test Register */
+	u32 rsvd30[58];
+
+	u32 firccsr;	/*  Fast IRC Control Status Register, offset 0x300 */
+	u32 fircdiv;
+	u32 firccfg;
+	u32 firctcfg;	/*  Fast IRC Trim Configuration Register */
+	u32 firctriml;	/*  Fast IRC Trim Low Register */
+	u32 firctrimh;
+	u32 fircstat;	/*  Fast IRC Status Register */
+	u32 firctest;	/*  Fast IRC Test Register */
+	u32 rsvd40[56];
+
+	u32 rtccsr;	/*  RTC OSC Control Status Register, offset 0x400 */
+	u32 rsvd50[63];
+
+	u32 apllcsr; /*  Auxiliary PLL Control Status Register, offset 0x500 */
+	u32 aplldiv;	/*  Auxiliary PLL Divider Register */
+	u32 apllcfg;	/*  Auxiliary PLL Configuration Register */
+	u32 apllpfd;	/*  Auxiliary PLL PFD Register */
+	u32 apllnum;	/*  Auxiliary PLL Numerator Register */
+	u32 aplldenom;	/*  Auxiliary PLL Denominator Register */
+	u32 apllss;	/*  Auxiliary PLL Spread Spectrum Register */
+	u32 rsvd60[55];
+	u32 apllock_cnfg; /*  Auxiliary PLL LOCK Configuration Register */
+	u32 rsvd61[1];
+
+	u32 spllcsr;	/*  System PLL Control Status Register, offset 0x600 */
+	u32 splldiv;	/*  System PLL Divide Register */
+	u32 spllcfg;	/*  System PLL Configuration Register */
+	u32 spllpfd;	/*  System PLL Test Register */
+	u32 spllnum;	/*  System PLL Numerator Register */
+	u32 splldenom;	/*  System PLL Denominator Register */
+	u32 spllss;	/*  System PLL Spread Spectrum Register */
+	u32 rsvd70[55];
+	u32 spllock_cnfg;	/*  System PLL LOCK Configuration Register */
+	u32 rsvd71[1];
+
+	u32 upllcsr;	/*  USB PLL Control Status Register, offset 0x700 */
+	u32 uplldiv;	/*  USB PLL Divide Register */
+	u32 upllcfg;	/*  USB PLL Configuration Register */
+} scg_t, *scg_p;
+
+u32 scg_clk_get_rate(enum scg_clk clk);
+int scg_enable_pll_pfd(enum scg_clk clk, u32 frac);
+int scg_enable_usb_pll(bool usb_control);
+u32 decode_pll(enum pll_clocks pll);
+
+void scg_a7_rccr_init(void);
+void scg_a7_spll_init(void);
+void scg_a7_ddrclk_init(void);
+void scg_a7_firc_init(void);
+void scg_a7_nicclk_init(void);
+void scg_a7_sys_clk_sel(enum scg_sys_src clk);
+void scg_a7_info(void);
+void scg_a7_soscdiv_init(void);
+void scg_a7_init_core_clk(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/sys_proto.h
new file mode 100644
index 000000000..0e4c8ad15
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mx7ulp/sys_proto.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _SYS_PROTO_MX7ULP_H_
+#define _SYS_PROTO_MX7ULP_H_
+
+#include <asm/mach-imx/sys_proto.h>
+
+#define BT0CFG_LPBOOT_MASK 0x1
+#define BT0CFG_DUALBOOT_MASK 0x2
+
+enum bt_mode {
+	LOW_POWER_BOOT,		/* LP_BT = 1 */
+	DUAL_BOOT,		/* LP_BT = 0, DUAL_BT = 1 */
+	SINGLE_BOOT		/* LP_BT = 0, DUAL_BT = 0 */
+};
+
+enum boot_device get_boot_device(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/clock.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/clock.h
new file mode 100644
index 000000000..ee56d10fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/clock.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX23/i.MX28 Clock
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_EMI_CLK,
+	MXC_GPMI_CLK,
+	MXC_IO0_CLK,
+	MXC_IO1_CLK,
+	MXC_XTAL_CLK,
+	MXC_SSP0_CLK,
+#ifdef CONFIG_MX28
+	MXC_SSP1_CLK,
+	MXC_SSP2_CLK,
+	MXC_SSP3_CLK,
+#endif
+};
+
+enum mxs_ioclock {
+	MXC_IOCLK0 = 0,
+	MXC_IOCLK1,
+};
+
+enum mxs_sspclock {
+	MXC_SSPCLK0 = 0,
+#ifdef CONFIG_MX28
+	MXC_SSPCLK1,
+	MXC_SSPCLK2,
+	MXC_SSPCLK3,
+#endif
+};
+
+uint32_t mxc_get_clock(enum mxc_clock clk);
+
+void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq);
+void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal);
+void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq);
+void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq);
+
+/* Compatibility with the FEC Ethernet driver */
+#define	imx_get_fecclk()	mxc_get_clock(MXC_AHB_CLK)
+
+#endif	/* __CLOCK_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/gpio.h
new file mode 100644
index 000000000..34fa42194
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/gpio.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 GPIO
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef	__MX28_GPIO_H__
+#define	__MX28_GPIO_H__
+
+#ifdef	CONFIG_MXS_GPIO
+void mxs_gpio_init(void);
+#else
+inline void mxs_gpio_init(void) {}
+#endif
+
+#endif	/* __MX28_GPIO_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/imx-regs.h
new file mode 100644
index 000000000..f853c484b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/imx-regs.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX23/i.MX28 Registers
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef __IMX_REGS_H__
+#define __IMX_REGS_H__
+
+#include <asm/mach-imx/regs-apbh.h>
+#include <asm/arch/regs-base.h>
+#include <asm/mach-imx/regs-bch.h>
+#include <asm/arch/regs-digctl.h>
+#include <asm/mach-imx/regs-gpmi.h>
+#include <asm/mach-imx/regs-lcdif.h>
+#include <asm/arch/regs-i2c.h>
+#include <asm/arch/regs-lradc.h>
+#include <asm/arch/regs-ocotp.h>
+#include <asm/arch/regs-pinctrl.h>
+#include <asm/arch/regs-rtc.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/regs-timrot.h>
+#include <asm/arch/regs-usb.h>
+#include <asm/arch/regs-usbphy.h>
+
+#ifdef CONFIG_MX23
+#include <asm/arch/regs-clkctrl-mx23.h>
+#include <asm/arch/regs-power-mx23.h>
+#endif
+
+#ifdef CONFIG_MX28
+#include <asm/arch/regs-clkctrl-mx28.h>
+#include <asm/arch/regs-power-mx28.h>
+#endif
+
+#endif	/* __IMX_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux-mx23.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux-mx23.h
new file mode 100644
index 000000000..2706efa75
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux-mx23.h
@@ -0,0 +1,349 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MACH_IOMUX_MX23_H__
+#define __MACH_IOMUX_MX23_H__
+
+#include <asm/arch/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ *									BANK	PIN	MUX
+ */
+/* MUXSEL_0 */
+#define MX23_PAD_GPMI_D00__GPMI_D00		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D01__GPMI_D01		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D02__GPMI_D02		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D03__GPMI_D03		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D04__GPMI_D04		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D05__GPMI_D05		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D06__GPMI_D06		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D07__GPMI_D07		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D08__GPMI_D08		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D09__GPMI_D09		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D10__GPMI_D10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D11__GPMI_D11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D12__GPMI_D12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D13__GPMI_D13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D14__GPMI_D14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D15__GPMI_D15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CLE__GPMI_CLE		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_ALE__GPMI_ALE		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_WPN__GPMI_WPN		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_WRN__GPMI_WRN		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDN__GPMI_RDN		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_CTS__AUART1_CTS		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_RTS__AUART1_RTS		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_RX__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_TX__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
+#define MX23_PAD_I2C_SCL__I2C_SCL		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
+#define MX23_PAD_I2C_SDA__I2C_SDA		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
+
+#define MX23_PAD_LCD_D00__LCD_D00		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D01__LCD_D01		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D02__LCD_D02		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D03__LCD_D03		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D04__LCD_D04		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D05__LCD_D05		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D06__LCD_D06		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D07__LCD_D07		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D08__LCD_D08		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D09__LCD_D09		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D10__LCD_D10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D11__LCD_D11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D12__LCD_D12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D13__LCD_D13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D14__LCD_D14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D15__LCD_D15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D16__LCD_D16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D17__LCD_D17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_RESET__LCD_RESET		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_RS__LCD_RS			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_WR__LCD_WR			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_CS__LCD_CS			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX23_PAD_PWM0__PWM0			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX23_PAD_PWM1__PWM1			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX23_PAD_PWM2__PWM2			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX23_PAD_PWM3__PWM3			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX23_PAD_PWM4__PWM4			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+
+#define MX23_PAD_SSP1_CMD__SSP1_CMD		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_SCK__SSP1_SCK		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
+#define MX23_PAD_ROTARYA__ROTARYA		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
+#define MX23_PAD_ROTARYB__ROTARYB		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A00__EMI_A00		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A01__EMI_A01		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A02__EMI_A02		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A03__EMI_A03		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A04__EMI_A04		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A05__EMI_A05		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A06__EMI_A06		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A07__EMI_A07		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A08__EMI_A08		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A09__EMI_A09		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A10__EMI_A10		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A11__EMI_A11		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A12__EMI_A12		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_BA0__EMI_BA0		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_BA1__EMI_BA1		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CASN__EMI_CASN		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CE0N__EMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CE1N__EMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CKE__EMI_CKE		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_RASN__EMI_RASN		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_WEN__EMI_WEN		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
+
+#define MX23_PAD_EMI_D00__EMI_D00		MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D01__EMI_D01		MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D02__EMI_D02		MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D03__EMI_D03		MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D04__EMI_D04		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D05__EMI_D05		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D06__EMI_D06		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D07__EMI_D07		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D08__EMI_D08		MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D09__EMI_D09		MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D10__EMI_D10		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D11__EMI_D11		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D12__EMI_D12		MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D13__EMI_D13		MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D14__EMI_D14		MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D15__EMI_D15		MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQM0__EMI_DQM0		MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQM1__EMI_DQM1		MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQS0__EMI_DQS0		MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQS1__EMI_DQS1		MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CLK__EMI_CLK		MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CLKN__EMI_CLKN		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX23_PAD_GPMI_D00__LCD_D8		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D01__LCD_D9		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D02__LCD_D10		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D03__LCD_D11		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D04__LCD_D12		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D05__LCD_D13		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D06__LCD_D14		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D07__LCD_D15		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D08__LCD_D18		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D09__LCD_D19		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D10__LCD_D20		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D11__LCD_D21		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D12__LCD_D22		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D13__LCD_D23		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D14__AUART2_RX		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D15__AUART2_TX		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_CLE__LCD_D16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_ALE__LCD_D17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_CE2N__ATA_A2		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_RTS__IR_CLK		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_RX__IR_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_TX__IR_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
+#define MX23_PAD_I2C_SCL__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
+#define MX23_PAD_I2C_SDA__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
+
+#define MX23_PAD_LCD_D00__ETM_DA8		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D01__ETM_DA9		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D02__ETM_DA10		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D03__ETM_DA11		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D04__ETM_DA12		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D05__ETM_DA13		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D06__ETM_DA14		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D07__ETM_DA15		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D08__ETM_DA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D09__ETM_DA1		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D10__ETM_DA2		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D11__ETM_DA3		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D12__ETM_DA4		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D13__ETM_DA5		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D14__ETM_DA6		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D15__ETM_DA7		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_RESET__ETM_TCTL		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_RS__ETM_TCLK		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_ENABLE__I2C_SCL		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_HSYNC__I2C_SDA		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX23_PAD_PWM0__ROTARYA			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX23_PAD_PWM1__ROTARYB			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX23_PAD_PWM2__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX23_PAD_PWM3__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX23_PAD_PWM4__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_1)
+#define MX23_PAD_SSP1_DATA1__I2C_SCL		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_1)
+#define MX23_PAD_SSP1_DATA2__I2C_SDA		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
+#define MX23_PAD_ROTARYA__AUART2_RTS		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
+#define MX23_PAD_ROTARYB__AUART2_CTS		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX23_PAD_GPMI_D00__SSP2_DATA0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D01__SSP2_DATA1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D02__SSP2_DATA2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D03__SSP2_DATA3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D04__SSP2_DATA4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D05__SSP2_DATA5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D06__SSP2_DATA6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D07__SSP2_DATA7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D08__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D09__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D10__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D11__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D15__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_WRN__SSP2_SCK		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_RX__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_TX__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
+#define MX23_PAD_I2C_SCL__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
+#define MX23_PAD_I2C_SDA__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
+
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK	MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D11__SAIF_LRCLK		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK	MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_RESET__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX23_PAD_PWM0__DUART_RX			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
+#define MX23_PAD_PWM1__DUART_TX			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
+#define MX23_PAD_PWM3__AUART1_CTS		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX23_PAD_PWM4__AUART1_RTS		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX23_PAD_SSP1_CMD__JTAG_TDO		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_SCK__JTAG_TRST		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_2)
+#define MX23_PAD_ROTARYA__SPDIF			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_2)
+#define MX23_PAD_ROTARYB__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX23_PAD_GPMI_D00__GPIO_0_0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D01__GPIO_0_1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D02__GPIO_0_2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D03__GPIO_0_3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D04__GPIO_0_4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D05__GPIO_0_5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D06__GPIO_0_6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D07__GPIO_0_7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D08__GPIO_0_8		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D09__GPIO_0_9		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D10__GPIO_0_10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D11__GPIO_0_11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D12__GPIO_0_12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D13__GPIO_0_13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D14__GPIO_0_14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D15__GPIO_0_15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CLE__GPIO_0_16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_ALE__GPIO_0_17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WPN__GPIO_0_23		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WRN__GPIO_0_24		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDN__GPIO_0_25		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_CTS__GPIO_0_26		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RTS__GPIO_0_27		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RX__GPIO_0_28		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_TX__GPIO_0_29		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SCL__GPIO_0_30		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SDA__GPIO_0_31		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
+
+#define MX23_PAD_LCD_D00__GPIO_1_0		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D01__GPIO_1_1		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D02__GPIO_1_2		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D03__GPIO_1_3		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D04__GPIO_1_4		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D05__GPIO_1_5		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D06__GPIO_1_6		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D07__GPIO_1_7		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D08__GPIO_1_8		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D09__GPIO_1_9		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D10__GPIO_1_10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D11__GPIO_1_11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D12__GPIO_1_12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D13__GPIO_1_13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D14__GPIO_1_14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D15__GPIO_1_15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D16__GPIO_1_16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D17__GPIO_1_17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RESET__GPIO_1_18		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RS__GPIO_1_19		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_WR__GPIO_1_20		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_CS__GPIO_1_21		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM0__GPIO_1_26		MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM1__GPIO_1_27		MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM2__GPIO_1_28		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM3__GPIO_1_29		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM4__GPIO_1_30		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+
+#define MX23_PAD_SSP1_CMD__GPIO_2_0		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_SCK__GPIO_2_6		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYA__GPIO_2_7		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYB__GPIO_2_8		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A00__GPIO_2_9		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A01__GPIO_2_10		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A02__GPIO_2_11		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A03__GPIO_2_12		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A04__GPIO_2_13		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A05__GPIO_2_14		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A06__GPIO_2_15		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A07__GPIO_2_16		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A08__GPIO_2_17		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A09__GPIO_2_18		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A10__GPIO_2_19		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A11__GPIO_2_20		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A12__GPIO_2_21		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA0__GPIO_2_22		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA1__GPIO_2_23		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CASN__GPIO_2_24		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE0N__GPIO_2_25		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE1N__GPIO_2_26		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CKE__GPIO_2_29		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_RASN__GPIO_2_30		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_WEN__GPIO_2_31		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux-mx28.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux-mx28.h
new file mode 100644
index 000000000..00356f013
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux-mx28.h
@@ -0,0 +1,531 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MACH_IOMUX_MX28_H__
+#define __MACH_IOMUX_MX28_H__
+
+#include <asm/arch/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ *									BANK	PIN	MUX
+ */
+/* MUXSEL_0 */
+#define MX28_PAD_GPMI_D00__GPMI_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D01__GPMI_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D02__GPMI_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D03__GPMI_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D04__GPMI_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D05__GPMI_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D06__GPMI_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D07__GPMI_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+
+#define MX28_PAD_LCD_D00__LCD_D0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D01__LCD_D1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D02__LCD_D2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D03__LCD_D3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D04__LCD_D4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D05__LCD_D5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D06__LCD_D6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D07__LCD_D7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D08__LCD_D8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D09__LCD_D9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D10__LCD_D10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D11__LCD_D11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D12__LCD_D12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D13__LCD_D13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D14__LCD_D14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D15__LCD_D15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D16__LCD_D16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D17__LCD_D17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D18__LCD_D18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D19__LCD_D19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D20__LCD_D20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D21__LCD_D21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D22__LCD_D22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D23__LCD_D23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RS__LCD_RS				MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_CS__LCD_CS				MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
+
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MISO__SSP2_D0			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS0__SSP2_D3			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS1__SSP2_D4			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS2__SSP2_D5			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MISO__SSP3_D0			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SS0__SSP3_D3			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+
+#define MX28_PAD_AUART0_RX__AUART0_RX			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_TX__AUART0_TX			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RX__AUART1_RX			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_TX__AUART1_TX			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RX__AUART2_RX			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_TX__AUART2_TX			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RX__AUART3_RX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_TX__AUART3_TX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX28_PAD_PWM0__PWM_0				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX28_PAD_PWM1__PWM_1				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX28_PAD_PWM2__PWM_2				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SPDIF__SPDIF_TX			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
+#define MX28_PAD_PWM3__PWM_3				MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
+#define MX28_PAD_PWM4__PWM_4				MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RESET__LCD_RESET			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
+
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_COL__ENET0_COL			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_D00__EMI_DATA0			MXS_IOMUX_PAD_NAKED(5,  0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D01__EMI_DATA1			MXS_IOMUX_PAD_NAKED(5,  1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D02__EMI_DATA2			MXS_IOMUX_PAD_NAKED(5,  2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D03__EMI_DATA3			MXS_IOMUX_PAD_NAKED(5,  3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D04__EMI_DATA4			MXS_IOMUX_PAD_NAKED(5,  4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D05__EMI_DATA5			MXS_IOMUX_PAD_NAKED(5,  5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D06__EMI_DATA6			MXS_IOMUX_PAD_NAKED(5,  6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D07__EMI_DATA7			MXS_IOMUX_PAD_NAKED(5,  7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D08__EMI_DATA8			MXS_IOMUX_PAD_NAKED(5,  8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D09__EMI_DATA9			MXS_IOMUX_PAD_NAKED(5,  9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D10__EMI_DATA10			MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D11__EMI_DATA11			MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D12__EMI_DATA12			MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D13__EMI_DATA13			MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D14__EMI_DATA14			MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D15__EMI_DATA15			MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CLK__EMI_CLK			MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_A00__EMI_ADDR0			MXS_IOMUX_PAD_NAKED(6,  0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A01__EMI_ADDR1			MXS_IOMUX_PAD_NAKED(6,  1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A02__EMI_ADDR2			MXS_IOMUX_PAD_NAKED(6,  2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A03__EMI_ADDR3			MXS_IOMUX_PAD_NAKED(6,  3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A04__EMI_ADDR4			MXS_IOMUX_PAD_NAKED(6,  4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A05__EMI_ADDR5			MXS_IOMUX_PAD_NAKED(6,  5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A06__EMI_ADDR6			MXS_IOMUX_PAD_NAKED(6,  6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A07__EMI_ADDR7			MXS_IOMUX_PAD_NAKED(6,  7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A08__EMI_ADDR8			MXS_IOMUX_PAD_NAKED(6,  8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A09__EMI_ADDR9			MXS_IOMUX_PAD_NAKED(6,  9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A10__EMI_ADDR10			MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A11__EMI_ADDR11			MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A12__EMI_ADDR12			MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A13__EMI_ADDR13			MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A14__EMI_ADDR14			MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA0__EMI_BA0			MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA1__EMI_BA1			MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA2__EMI_BA2			MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CASN__EMI_CASN			MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_RASN__EMI_RASN			MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_WEN__EMI_WEN			MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CKE__EMI_CKE			MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX28_PAD_GPMI_D00__SSP1_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D01__SSP1_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D02__SSP1_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D03__SSP1_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D04__SSP1_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D05__SSP1_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D06__SSP1_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D07__SSP1_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_ALE__SSP3_D1			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CLE__SSP3_D2			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+
+#define MX28_PAD_LCD_D03__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D04__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D08__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D09__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_CS__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_SCK__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_CMD__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SCK__AUART2_RX			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MISO__AUART3_RX			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS0__AUART3_TX			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS1__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS2__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SCK__AUART4_TX			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
+
+#define MX28_PAD_AUART0_RX__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_TX__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_CTS__AUART4_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_RTS__AUART4_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RTS__USB0_ID			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RX__SSP3_D1			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_TX__SSP3_D2			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RX__CAN0_TX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_TX__CAN0_RX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_CTS__CAN1_TX			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RTS__CAN1_RX			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
+#define MX28_PAD_PWM0__I2C1_SCL				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
+#define MX28_PAD_PWM1__I2C1_SDA				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
+#define MX28_PAD_PWM2__USB0_ID				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_MCLK__PWM_3			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY0__USB0_ID			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_ALE__SSP3_D4			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CLE__SSP3_D5			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_LCD_D00__ETM_DA0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D01__ETM_DA1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D02__ETM_DA2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D03__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D04__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D05__ETM_DA5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D06__ETM_DA6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D07__ETM_DA7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D08__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D09__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D10__ETM_DA10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D11__ETM_DA11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D12__ETM_DA12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D13__ETM_DA13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D14__ETM_DA14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D15__ETM_DA15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D16__ETM_DA7			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D17__ETM_DA6			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D18__ETM_DA5			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D19__ETM_DA4			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D20__ETM_DA3			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D21__ETM_DA2			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D22__ETM_DA1			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D23__ETM_DA0			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_AUART0_RX__DUART_CTS			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_TX__DUART_RTS			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_CTS__DUART_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_RTS__DUART_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RX__PWM_0			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_TX__PWM_1			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RX__SSP3_D4			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_TX__SSP3_D5			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
+#define MX28_PAD_PWM0__DUART_RX				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
+#define MX28_PAD_PWM1__DUART_TX				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SCL__DUART_RX			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SDA__DUART_TX			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SPDIF__ENET1_RX_ER			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX28_PAD_GPMI_D00__GPIO_0_0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D01__GPIO_0_1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D02__GPIO_0_2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D03__GPIO_0_3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D04__GPIO_0_4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D05__GPIO_0_5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D06__GPIO_0_6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D07__GPIO_0_7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_LCD_D00__GPIO_1_0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D01__GPIO_1_1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D02__GPIO_1_2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D03__GPIO_1_3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D04__GPIO_1_4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D05__GPIO_1_5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D06__GPIO_1_6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D07__GPIO_1_7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D08__GPIO_1_8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D09__GPIO_1_9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D10__GPIO_1_10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D11__GPIO_1_11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D12__GPIO_1_12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D13__GPIO_1_13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D14__GPIO_1_14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D15__GPIO_1_15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D16__GPIO_1_16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D17__GPIO_1_17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D18__GPIO_1_18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D19__GPIO_1_19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D20__GPIO_1_20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D21__GPIO_1_21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D22__GPIO_1_22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D23__GPIO_1_23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RS__GPIO_1_26			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_CS__GPIO_1_27			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_AUART0_RX__GPIO_3_0			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_TX__GPIO_3_1			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RX__GPIO_3_4			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_TX__GPIO_3_5			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RX__GPIO_3_8			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_TX__GPIO_3_9			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RX__GPIO_3_12			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_TX__GPIO_3_13			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM0__GPIO_3_16			MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM1__GPIO_3_17			MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM2__GPIO_3_18			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SPDIF__GPIO_3_27			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM3__GPIO_3_28			MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM4__GPIO_3_29			MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RESET__GPIO_3_30			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_COL__GPIO_4_14			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET_CLK__GPIO_4_16			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux.h
new file mode 100644
index 000000000..a9896e10b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/iomux.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MACH_MXS_IOMUX_H__
+#define __MACH_MXS_IOMUX_H__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/*
+ * IOMUX/PAD Bit field definitions
+ *
+ * PAD_BANK:		 0..2	(3)
+ * PAD_PIN:		 3..7	(5)
+ * PAD_MUXSEL:		 8..9	(2)
+ * PAD_MA:		10..11	(2)
+ * PAD_MA_VALID:	12	(1)
+ * PAD_VOL:		13	(1)
+ * PAD_VOL_VALID:	14	(1)
+ * PAD_PULL:		15	(1)
+ * PAD_PULL_VALID:	16	(1)
+ * RESERVED:		17..31	(15)
+ */
+typedef u32 iomux_cfg_t;
+
+#define MXS_PAD_BANK_SHIFT	0
+#define MXS_PAD_BANK_MASK	((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
+#define MXS_PAD_PIN_SHIFT	3
+#define MXS_PAD_PIN_MASK	((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
+#define MXS_PAD_MUXSEL_SHIFT	8
+#define MXS_PAD_MUXSEL_MASK	((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
+#define MXS_PAD_MA_SHIFT	10
+#define MXS_PAD_MA_MASK		((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
+#define MXS_PAD_MA_VALID_SHIFT	12
+#define MXS_PAD_MA_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
+#define MXS_PAD_VOL_SHIFT	13
+#define MXS_PAD_VOL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
+#define MXS_PAD_VOL_VALID_SHIFT	14
+#define MXS_PAD_VOL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
+#define MXS_PAD_PULL_SHIFT	15
+#define MXS_PAD_PULL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
+#define MXS_PAD_PULL_VALID_SHIFT 16
+#define MXS_PAD_PULL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
+
+#define PAD_MUXSEL_0		0
+#define PAD_MUXSEL_1		1
+#define PAD_MUXSEL_2		2
+#define PAD_MUXSEL_GPIO		3
+
+#define PAD_4MA			0
+#define PAD_8MA			1
+#define PAD_12MA		2
+#define PAD_16MA		3
+
+#define PAD_1V8			0
+#if defined(CONFIG_MX28)
+#define PAD_3V3			1
+#else
+#define PAD_3V3			0
+#endif
+
+#define PAD_NOPULL		0
+#define PAD_PULLUP		1
+
+#define MXS_PAD_4MA	((PAD_4MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_8MA	((PAD_8MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_12MA	((PAD_12MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_16MA	((PAD_16MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+
+#define MXS_PAD_1V8	((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
+					MXS_PAD_VOL_VALID_MASK)
+#define MXS_PAD_3V3	((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
+					MXS_PAD_VOL_VALID_MASK)
+
+#define MXS_PAD_NOPULL	((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
+					MXS_PAD_PULL_VALID_MASK)
+#define MXS_PAD_PULLUP	((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
+					MXS_PAD_PULL_VALID_MASK)
+
+/* generic pad control used in most cases */
+#define MXS_PAD_CTRL	(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
+
+#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull)		\
+		(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) |		\
+		((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) |		\
+		((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) |	\
+		((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) |		\
+		((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) |		\
+		((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
+
+/*
+ * A pad becomes naked, when none of mA, vol or pull
+ * validity bits is set.
+ */
+#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
+		MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
+
+static inline unsigned int PAD_BANK(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
+}
+
+static inline unsigned int PAD_PIN(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
+}
+
+static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
+}
+
+static inline unsigned int PAD_MA(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
+}
+
+static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_VOL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
+}
+
+static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_PULL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
+}
+
+static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
+}
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad);
+
+/*
+ * configures multiple pads
+ * convenient way to call the above function with tables
+ */
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-base.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-base.h
new file mode 100644
index 000000000..44d40cade
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-base.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX23/i.MX28 Peripheral Base Addresses
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2008 Embedded Alley Solutions Inc.
+ *
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MXS_REGS_BASE_H__
+#define __MXS_REGS_BASE_H__
+
+/*
+ * Register base addresses for i.MX23
+ */
+#if defined(CONFIG_MX23)
+#define	MXS_ICOLL_BASE		0x80000000
+#define	MXS_APBH_BASE		0x80004000
+#define	MXS_ECC8_BASE		0x80008000
+#define	MXS_BCH_BASE		0x8000A000
+#define	MXS_GPMI_BASE		0x8000C000
+#define	MXS_SSP0_BASE		0x80010000
+#define	MXS_SSP1_BASE		0x80034000
+#define	MXS_ETM_BASE		0x80014000
+#define	MXS_PINCTRL_BASE	0x80018000
+#define	MXS_DIGCTL_BASE		0x8001C000
+#define	MXS_EMI_BASE		0x80020000
+#define	MXS_APBX_BASE		0x80024000
+#define	MXS_DCP_BASE		0x80028000
+#define	MXS_PXP_BASE		0x8002A000
+#define	MXS_OCOTP_BASE		0x8002C000
+#define	MXS_AXI_BASE		0x8002E000
+#define	MXS_LCDIF_BASE		0x80030000
+#define	MXS_SSP1_BASE		0x80034000
+#define	MXS_TVENC_BASE		0x80038000
+#define	MXS_CLKCTRL_BASE	0x80040000
+#define	MXS_SAIF0_BASE		0x80042000
+#define	MXS_POWER_BASE		0x80044000
+#define	MXS_SAIF1_BASE		0x80046000
+#define	MXS_AUDIOOUT_BASE	0x80048000
+#define	MXS_AUDIOIN_BASE	0x8004C000
+#define	MXS_LRADC_BASE		0x80050000
+#define	MXS_SPDIF_BASE		0x80054000
+#define	MXS_I2C0_BASE		0x80058000
+#define	MXS_RTC_BASE		0x8005C000
+#define	MXS_PWM_BASE		0x80064000
+#define	MXS_TIMROT_BASE		0x80068000
+#define	MXS_UARTAPP0_BASE	0x8006C000
+#define	MXS_UARTAPP1_BASE	0x8006E000
+#define	MXS_UARTDBG_BASE	0x80070000
+#define	MXS_USBPHY0_BASE	0x8007C000
+#define	MXS_USBCTRL0_BASE	0x80080000
+#define	MXS_DRAM_BASE		0x800E0000
+
+/*
+ * Register base addresses for i.MX28
+ */
+#elif defined(CONFIG_MX28)
+#define	MXS_ICOL_BASE		0x80000000
+#define	MXS_HSADC_BASE		0x80002000
+#define	MXS_APBH_BASE		0x80004000
+#define	MXS_PERFMON_BASE	0x80006000
+#define	MXS_BCH_BASE		0x8000A000
+#define	MXS_GPMI_BASE		0x8000C000
+#define	MXS_SSP0_BASE		0x80010000
+#define	MXS_SSP1_BASE		0x80012000
+#define	MXS_SSP2_BASE		0x80014000
+#define	MXS_SSP3_BASE		0x80016000
+#define	MXS_PINCTRL_BASE	0x80018000
+#define	MXS_DIGCTL_BASE		0x8001C000
+#define	MXS_ETM_BASE		0x80022000
+#define	MXS_APBX_BASE		0x80024000
+#define	MXS_DCP_BASE		0x80028000
+#define	MXS_PXP_BASE		0x8002A000
+#define	MXS_OCOTP_BASE		0x8002C000
+#define	MXS_AXI_AHB0_BASE	0x8002E000
+#define	MXS_LCDIF_BASE		0x80030000
+#define	MXS_CAN0_BASE		0x80032000
+#define	MXS_CAN1_BASE		0x80034000
+#define	MXS_SIMDBG_BASE		0x8003C000
+#define	MXS_SIMGPMISEL_BASE	0x8003C200
+#define	MXS_SIMSSPSEL_BASE	0x8003C300
+#define	MXS_SIMMEMSEL_BASE	0x8003C400
+#define	MXS_GPIOMON_BASE	0x8003C500
+#define	MXS_SIMENET_BASE	0x8003C700
+#define	MXS_ARMJTAG_BASE	0x8003C800
+#define	MXS_CLKCTRL_BASE	0x80040000
+#define	MXS_SAIF0_BASE		0x80042000
+#define	MXS_POWER_BASE		0x80044000
+#define	MXS_SAIF1_BASE		0x80046000
+#define	MXS_LRADC_BASE		0x80050000
+#define	MXS_SPDIF_BASE		0x80054000
+#define	MXS_RTC_BASE		0x80056000
+#define	MXS_I2C0_BASE		0x80058000
+#define	MXS_I2C1_BASE		0x8005A000
+#define	MXS_PWM_BASE		0x80064000
+#define	MXS_TIMROT_BASE		0x80068000
+#define	MXS_UARTAPP0_BASE	0x8006A000
+#define	MXS_UARTAPP1_BASE	0x8006C000
+#define	MXS_UARTAPP2_BASE	0x8006E000
+#define	MXS_UARTAPP3_BASE	0x80070000
+#define	MXS_UARTAPP4_BASE	0x80072000
+#define	MXS_UARTDBG_BASE	0x80074000
+#define	MXS_USBPHY0_BASE	0x8007C000
+#define	MXS_USBPHY1_BASE	0x8007E000
+#define	MXS_USBCTRL0_BASE	0x80080000
+#define	MXS_USBCTRL1_BASE	0x80090000
+#define	MXS_DFLPT_BASE		0x800C0000
+#define	MXS_DRAM_BASE		0x800E0000
+#define	MXS_ENET0_BASE		0x800F0000
+#define	MXS_ENET1_BASE		0x800F4000
+#else
+#error Unkown SoC. Please set CONFIG_MX23 or CONFIG_MX28
+#endif
+
+#endif /* __MXS_REGS_BASE_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
new file mode 100644
index 000000000..50fdc9cd0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX23 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2012 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MX23_REGS_CLKCTRL_H__
+#define __MX23_REGS_CLKCTRL_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_clkctrl_regs {
+	mxs_reg_32(hw_clkctrl_pll0ctrl0)	/* 0x00 */
+	uint32_t	hw_clkctrl_pll0ctrl1;	/* 0x10 */
+	uint32_t	reserved_pll0ctrl1[3];	/* 0x14-0x1c */
+	mxs_reg_32(hw_clkctrl_cpu)		/* 0x20 */
+	mxs_reg_32(hw_clkctrl_hbus)		/* 0x30 */
+	mxs_reg_32(hw_clkctrl_xbus)		/* 0x40 */
+	mxs_reg_32(hw_clkctrl_xtal)		/* 0x50 */
+	mxs_reg_32(hw_clkctrl_pix)		/* 0x60 */
+	uint32_t	hw_clkctrl_ssp0;	/* 0x70 */
+	uint32_t	reserved_ssp0[3];	/* 0x74-0x7c */
+	uint32_t	hw_clkctrl_gpmi;	/* 0x80 */
+	uint32_t	reserved_gpmi[3];	/* 0x84-0x8c */
+	mxs_reg_32(hw_clkctrl_spdif)		/* 0x90 */
+	mxs_reg_32(hw_clkctrl_emi)		/* 0xa0 */
+
+	uint32_t	reserved1[4];
+
+	mxs_reg_32(hw_clkctrl_saif0)		/* 0xc0 */
+	mxs_reg_32(hw_clkctrl_tv)		/* 0xd0 */
+	mxs_reg_32(hw_clkctrl_etm)		/* 0xe0 */
+	mxs_reg_8(hw_clkctrl_frac0)		/* 0xf0 */
+	mxs_reg_8(hw_clkctrl_frac1)		/* 0x100 */
+	mxs_reg_32(hw_clkctrl_clkseq)		/* 0x110 */
+	mxs_reg_32(hw_clkctrl_reset)		/* 0x120 */
+	mxs_reg_32(hw_clkctrl_status)		/* 0x130 */
+	mxs_reg_32(hw_clkctrl_version)		/* 0x140 */
+};
+#endif
+
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_MASK		(0x3 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET	28
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT	(0x0 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2	(0x1 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05	(0x2 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED	(0x3 << 28)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_MASK		(0x3 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET		24
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT	(0x0 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2	(0x1 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05	(0x2 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED	(0x3 << 24)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_MASK		(0x3 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET	20
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT	(0x0 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER		(0x1 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST	(0x2 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED	(0x3 << 20)
+#define	CLKCTRL_PLL0CTRL0_EN_USB_CLKS		(1 << 18)
+#define	CLKCTRL_PLL0CTRL0_POWER			(1 << 16)
+
+#define	CLKCTRL_PLL0CTRL1_LOCK			(1 << 31)
+#define	CLKCTRL_PLL0CTRL1_FORCE_LOCK		(1 << 30)
+#define	CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK	0xffff
+#define	CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET	0
+
+#define	CLKCTRL_CPU_BUSY_REF_XTAL		(1 << 29)
+#define	CLKCTRL_CPU_BUSY_REF_CPU		(1 << 28)
+#define	CLKCTRL_CPU_DIV_XTAL_FRAC_EN		(1 << 26)
+#define	CLKCTRL_CPU_DIV_XTAL_MASK		(0x3ff << 16)
+#define	CLKCTRL_CPU_DIV_XTAL_OFFSET		16
+#define	CLKCTRL_CPU_INTERRUPT_WAIT		(1 << 12)
+#define	CLKCTRL_CPU_DIV_CPU_FRAC_EN		(1 << 10)
+#define	CLKCTRL_CPU_DIV_CPU_MASK		0x3f
+#define	CLKCTRL_CPU_DIV_CPU_OFFSET		0
+
+#define	CLKCTRL_HBUS_BUSY			(1 << 29)
+#define	CLKCTRL_HBUS_DCP_AS_ENABLE		(1 << 28)
+#define	CLKCTRL_HBUS_PXP_AS_ENABLE		(1 << 27)
+#define	CLKCTRL_HBUS_APBHDMA_AS_ENABLE		(1 << 26)
+#define	CLKCTRL_HBUS_APBXDMA_AS_ENABLE		(1 << 25)
+#define	CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	(1 << 24)
+#define	CLKCTRL_HBUS_TRAFFIC_AS_ENABLE		(1 << 23)
+#define	CLKCTRL_HBUS_CPU_DATA_AS_ENABLE		(1 << 22)
+#define	CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	(1 << 21)
+#define	CLKCTRL_HBUS_AUTO_SLOW_MODE		(1 << 20)
+#define	CLKCTRL_HBUS_SLOW_DIV_MASK		(0x7 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_OFFSET		16
+#define	CLKCTRL_HBUS_SLOW_DIV_BY1		(0x0 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY2		(0x1 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY4		(0x2 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY8		(0x3 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY16		(0x4 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY32		(0x5 << 16)
+#define	CLKCTRL_HBUS_DIV_FRAC_EN		(1 << 5)
+#define	CLKCTRL_HBUS_DIV_MASK			0x1f
+#define	CLKCTRL_HBUS_DIV_OFFSET			0
+
+#define	CLKCTRL_XBUS_BUSY			(1 << 31)
+#define	CLKCTRL_XBUS_DIV_FRAC_EN		(1 << 10)
+#define	CLKCTRL_XBUS_DIV_MASK			0x3ff
+#define	CLKCTRL_XBUS_DIV_OFFSET			0
+
+#define	CLKCTRL_XTAL_UART_CLK_GATE		(1 << 31)
+#define	CLKCTRL_XTAL_FILT_CLK24M_GATE		(1 << 30)
+#define	CLKCTRL_XTAL_PWM_CLK24M_GATE		(1 << 29)
+#define	CLKCTRL_XTAL_DRI_CLK24M_GATE		(1 << 28)
+#define	CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE		(1 << 27)
+#define	CLKCTRL_XTAL_TIMROT_CLK32K_GATE		(1 << 26)
+#define	CLKCTRL_XTAL_DIV_UART_MASK		0x3
+#define	CLKCTRL_XTAL_DIV_UART_OFFSET		0
+
+#define	CLKCTRL_PIX_CLKGATE			(1 << 31)
+#define	CLKCTRL_PIX_BUSY			(1 << 29)
+#define	CLKCTRL_PIX_DIV_FRAC_EN			(1 << 12)
+#define	CLKCTRL_PIX_DIV_MASK			0xfff
+#define	CLKCTRL_PIX_DIV_OFFSET			0
+
+#define	CLKCTRL_SSP_CLKGATE			(1 << 31)
+#define	CLKCTRL_SSP_BUSY			(1 << 29)
+#define	CLKCTRL_SSP_DIV_FRAC_EN			(1 << 9)
+#define	CLKCTRL_SSP_DIV_MASK			0x1ff
+#define	CLKCTRL_SSP_DIV_OFFSET			0
+
+#define	CLKCTRL_GPMI_CLKGATE			(1 << 31)
+#define	CLKCTRL_GPMI_BUSY			(1 << 29)
+#define	CLKCTRL_GPMI_DIV_FRAC_EN		(1 << 10)
+#define	CLKCTRL_GPMI_DIV_MASK			0x3ff
+#define	CLKCTRL_GPMI_DIV_OFFSET			0
+
+#define	CLKCTRL_SPDIF_CLKGATE			(1 << 31)
+
+#define	CLKCTRL_EMI_CLKGATE			(1 << 31)
+#define	CLKCTRL_EMI_SYNC_MODE_EN		(1 << 30)
+#define	CLKCTRL_EMI_BUSY_REF_XTAL		(1 << 29)
+#define	CLKCTRL_EMI_BUSY_REF_EMI		(1 << 28)
+#define	CLKCTRL_EMI_BUSY_REF_CPU		(1 << 27)
+#define	CLKCTRL_EMI_BUSY_SYNC_MODE		(1 << 26)
+#define	CLKCTRL_EMI_BUSY_DCC_RESYNC		(1 << 17)
+#define	CLKCTRL_EMI_DCC_RESYNC_ENABLE		(1 << 16)
+#define	CLKCTRL_EMI_DIV_XTAL_MASK		(0xf << 8)
+#define	CLKCTRL_EMI_DIV_XTAL_OFFSET		8
+#define	CLKCTRL_EMI_DIV_EMI_MASK		0x3f
+#define	CLKCTRL_EMI_DIV_EMI_OFFSET		0
+
+#define	CLKCTRL_IR_CLKGATE			(1 << 31)
+#define	CLKCTRL_IR_AUTO_DIV			(1 << 29)
+#define	CLKCTRL_IR_IR_BUSY			(1 << 28)
+#define	CLKCTRL_IR_IROV_BUSY			(1 << 27)
+#define	CLKCTRL_IR_IROV_DIV_MASK		(0x1ff << 16)
+#define	CLKCTRL_IR_IROV_DIV_OFFSET		16
+#define	CLKCTRL_IR_IR_DIV_MASK			0x3ff
+#define	CLKCTRL_IR_IR_DIV_OFFSET		0
+
+#define	CLKCTRL_SAIF0_CLKGATE			(1 << 31)
+#define	CLKCTRL_SAIF0_BUSY			(1 << 29)
+#define	CLKCTRL_SAIF0_DIV_FRAC_EN		(1 << 16)
+#define	CLKCTRL_SAIF0_DIV_MASK			0xffff
+#define	CLKCTRL_SAIF0_DIV_OFFSET		0
+
+#define	CLKCTRL_TV_CLK_TV108M_GATE		(1 << 31)
+#define	CLKCTRL_TV_CLK_TV_GATE			(1 << 30)
+
+#define	CLKCTRL_ETM_CLKGATE			(1 << 31)
+#define	CLKCTRL_ETM_BUSY			(1 << 29)
+#define	CLKCTRL_ETM_DIV_FRAC_EN			(1 << 6)
+#define	CLKCTRL_ETM_DIV_MASK			0x3f
+#define	CLKCTRL_ETM_DIV_OFFSET			0
+
+#define	CLKCTRL_FRAC_CLKGATE			(1 << 7)
+#define	CLKCTRL_FRAC_STABLE			(1 << 6)
+#define	CLKCTRL_FRAC_FRAC_MASK			0x3f
+#define	CLKCTRL_FRAC_FRAC_OFFSET		0
+#define	CLKCTRL_FRAC0_CPU			0
+#define	CLKCTRL_FRAC0_EMI			1
+#define	CLKCTRL_FRAC0_PIX			2
+#define	CLKCTRL_FRAC0_IO0			3
+#define	CLKCTRL_FRAC1_VID			3
+
+#define	CLKCTRL_CLKSEQ_BYPASS_ETM		(1 << 8)
+#define	CLKCTRL_CLKSEQ_BYPASS_CPU		(1 << 7)
+#define	CLKCTRL_CLKSEQ_BYPASS_EMI		(1 << 6)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP0		(1 << 5)
+#define	CLKCTRL_CLKSEQ_BYPASS_GPMI		(1 << 4)
+#define	CLKCTRL_CLKSEQ_BYPASS_IR		(1 << 3)
+#define	CLKCTRL_CLKSEQ_BYPASS_PIX		(1 << 1)
+#define	CLKCTRL_CLKSEQ_BYPASS_SAIF		(1 << 0)
+
+#define	CLKCTRL_RESET_CHIP			(1 << 1)
+#define	CLKCTRL_RESET_DIG			(1 << 0)
+
+#define	CLKCTRL_STATUS_CPU_LIMIT_MASK		(0x3 << 30)
+#define	CLKCTRL_STATUS_CPU_LIMIT_OFFSET		30
+
+#define	CLKCTRL_VERSION_MAJOR_MASK		(0xff << 24)
+#define	CLKCTRL_VERSION_MAJOR_OFFSET		24
+#define	CLKCTRL_VERSION_MINOR_MASK		(0xff << 16)
+#define	CLKCTRL_VERSION_MINOR_OFFSET		16
+#define	CLKCTRL_VERSION_STEP_MASK		0xffff
+#define	CLKCTRL_VERSION_STEP_OFFSET		0
+
+#endif /* __MX23_REGS_CLKCTRL_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
new file mode 100644
index 000000000..caef9e4b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
@@ -0,0 +1,287 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MX28_REGS_CLKCTRL_H__
+#define __MX28_REGS_CLKCTRL_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_clkctrl_regs {
+	mxs_reg_32(hw_clkctrl_pll0ctrl0)	/* 0x00 */
+	uint32_t	hw_clkctrl_pll0ctrl1;	/* 0x10 */
+	uint32_t	reserved_pll0ctrl1[3];	/* 0x14-0x1c */
+	mxs_reg_32(hw_clkctrl_pll1ctrl0)	/* 0x20 */
+	uint32_t	hw_clkctrl_pll1ctrl1;	/* 0x30 */
+	uint32_t	reserved_pll1ctrl1[3];	/* 0x34-0x3c */
+	mxs_reg_32(hw_clkctrl_pll2ctrl0)	/* 0x40 */
+	mxs_reg_32(hw_clkctrl_cpu)		/* 0x50 */
+	mxs_reg_32(hw_clkctrl_hbus)		/* 0x60 */
+	mxs_reg_32(hw_clkctrl_xbus)		/* 0x70 */
+	mxs_reg_32(hw_clkctrl_xtal)		/* 0x80 */
+	uint32_t	hw_clkctrl_ssp0;	/* 0x90 */
+	uint32_t	reserved_ssp0[3];	/* 0x94-0x9c */
+	uint32_t	hw_clkctrl_ssp1;	/* 0xa0 */
+	uint32_t	reserved_ssp1[3];	/* 0xa4-0xac */
+	uint32_t	hw_clkctrl_ssp2;	/* 0xb0 */
+	uint32_t	reserved_ssp2[3];	/* 0xb4-0xbc */
+	uint32_t	hw_clkctrl_ssp3;	/* 0xc0 */
+	uint32_t	reserved_ssp3[3];	/* 0xc4-0xcc */
+	uint32_t	hw_clkctrl_gpmi;	/* 0xd0 */
+	uint32_t	reserved_gpmi[3];	/* 0xd4-0xdc */
+	mxs_reg_32(hw_clkctrl_spdif)		/* 0xe0 */
+	mxs_reg_32(hw_clkctrl_emi)		/* 0xf0 */
+	mxs_reg_32(hw_clkctrl_saif0)		/* 0x100 */
+	mxs_reg_32(hw_clkctrl_saif1)		/* 0x110 */
+	mxs_reg_32(hw_clkctrl_lcdif)		/* 0x120 */
+	mxs_reg_32(hw_clkctrl_etm)		/* 0x130 */
+	mxs_reg_32(hw_clkctrl_enet)		/* 0x140 */
+	mxs_reg_32(hw_clkctrl_hsadc)		/* 0x150 */
+	mxs_reg_32(hw_clkctrl_flexcan)		/* 0x160 */
+
+	uint32_t	reserved[16];
+
+	mxs_reg_8(hw_clkctrl_frac0)		/* 0x1b0 */
+	mxs_reg_8(hw_clkctrl_frac1)		/* 0x1c0 */
+	mxs_reg_32(hw_clkctrl_clkseq)		/* 0x1d0 */
+	mxs_reg_32(hw_clkctrl_reset)		/* 0x1e0 */
+	mxs_reg_32(hw_clkctrl_status)		/* 0x1f0 */
+	mxs_reg_32(hw_clkctrl_version)		/* 0x200 */
+};
+#endif
+
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_MASK		(0x3 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET	28
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT	(0x0 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2	(0x1 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05	(0x2 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED	(0x3 << 28)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_MASK		(0x3 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET		24
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT	(0x0 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2	(0x1 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05	(0x2 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED	(0x3 << 24)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_MASK		(0x3 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET	20
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT	(0x0 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER		(0x1 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST	(0x2 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED	(0x3 << 20)
+#define	CLKCTRL_PLL0CTRL0_EN_USB_CLKS		(1 << 18)
+#define	CLKCTRL_PLL0CTRL0_POWER			(1 << 17)
+
+#define	CLKCTRL_PLL0CTRL1_LOCK			(1 << 31)
+#define	CLKCTRL_PLL0CTRL1_FORCE_LOCK		(1 << 30)
+#define	CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK	0xffff
+#define	CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET	0
+
+#define	CLKCTRL_PLL1CTRL0_CLKGATEEMI		(1 << 31)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_MASK		(0x3 << 28)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_OFFSET	28
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_DEFAULT	(0x0 << 28)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_2	(0x1 << 28)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_05	(0x2 << 28)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_UNDEFINED	(0x3 << 28)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_MASK		(0x3 << 24)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_OFFSET		24
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_DEFAULT	(0x0 << 24)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_2	(0x1 << 24)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_05	(0x2 << 24)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_UNDEFINED	(0x3 << 24)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_MASK		(0x3 << 20)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_OFFSET	20
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_DEFAULT	(0x0 << 20)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_LOWER		(0x1 << 20)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_LOWEST	(0x2 << 20)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_UNDEFINED	(0x3 << 20)
+#define	CLKCTRL_PLL1CTRL0_EN_USB_CLKS		(1 << 18)
+#define	CLKCTRL_PLL1CTRL0_POWER			(1 << 17)
+
+#define	CLKCTRL_PLL1CTRL1_LOCK			(1 << 31)
+#define	CLKCTRL_PLL1CTRL1_FORCE_LOCK		(1 << 30)
+#define	CLKCTRL_PLL1CTRL1_LOCK_COUNT_MASK	0xffff
+#define	CLKCTRL_PLL1CTRL1_LOCK_COUNT_OFFSET	0
+
+#define	CLKCTRL_PLL2CTRL0_CLKGATE		(1 << 31)
+#define	CLKCTRL_PLL2CTRL0_LFR_SEL_MASK		(0x3 << 28)
+#define	CLKCTRL_PLL2CTRL0_LFR_SEL_OFFSET	28
+#define	CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B	(1 << 26)
+#define	CLKCTRL_PLL2CTRL0_CP_SEL_MASK		(0x3 << 24)
+#define	CLKCTRL_PLL2CTRL0_CP_SEL_OFFSET		24
+#define	CLKCTRL_PLL2CTRL0_POWER			(1 << 23)
+
+#define	CLKCTRL_CPU_BUSY_REF_XTAL		(1 << 29)
+#define	CLKCTRL_CPU_BUSY_REF_CPU		(1 << 28)
+#define	CLKCTRL_CPU_DIV_XTAL_FRAC_EN		(1 << 26)
+#define	CLKCTRL_CPU_DIV_XTAL_MASK		(0x3ff << 16)
+#define	CLKCTRL_CPU_DIV_XTAL_OFFSET		16
+#define	CLKCTRL_CPU_INTERRUPT_WAIT		(1 << 12)
+#define	CLKCTRL_CPU_DIV_CPU_FRAC_EN		(1 << 10)
+#define	CLKCTRL_CPU_DIV_CPU_MASK		0x3f
+#define	CLKCTRL_CPU_DIV_CPU_OFFSET		0
+
+#define	CLKCTRL_HBUS_ASM_BUSY			(1 << 31)
+#define	CLKCTRL_HBUS_DCP_AS_ENABLE		(1 << 30)
+#define	CLKCTRL_HBUS_PXP_AS_ENABLE		(1 << 29)
+#define	CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE	(1 << 27)
+#define	CLKCTRL_HBUS_APBHDMA_AS_ENABLE		(1 << 26)
+#define	CLKCTRL_HBUS_APBXDMA_AS_ENABLE		(1 << 25)
+#define	CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	(1 << 24)
+#define	CLKCTRL_HBUS_TRAFFIC_AS_ENABLE		(1 << 23)
+#define	CLKCTRL_HBUS_CPU_DATA_AS_ENABLE		(1 << 22)
+#define	CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	(1 << 21)
+#define	CLKCTRL_HBUS_ASM_ENABLE			(1 << 20)
+#define	CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE	(1 << 19)
+#define	CLKCTRL_HBUS_SLOW_DIV_MASK		(0x7 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_OFFSET		16
+#define	CLKCTRL_HBUS_SLOW_DIV_BY1		(0x0 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY2		(0x1 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY4		(0x2 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY8		(0x3 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY16		(0x4 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY32		(0x5 << 16)
+#define	CLKCTRL_HBUS_DIV_FRAC_EN		(1 << 5)
+#define	CLKCTRL_HBUS_DIV_MASK			0x1f
+#define	CLKCTRL_HBUS_DIV_OFFSET			0
+
+#define	CLKCTRL_XBUS_BUSY			(1 << 31)
+#define	CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE	(1 << 11)
+#define	CLKCTRL_XBUS_DIV_FRAC_EN		(1 << 10)
+#define	CLKCTRL_XBUS_DIV_MASK			0x3ff
+#define	CLKCTRL_XBUS_DIV_OFFSET			0
+
+#define	CLKCTRL_XTAL_UART_CLK_GATE		(1 << 31)
+#define	CLKCTRL_XTAL_PWM_CLK24M_GATE		(1 << 29)
+#define	CLKCTRL_XTAL_TIMROT_CLK32K_GATE		(1 << 26)
+#define	CLKCTRL_XTAL_DIV_UART_MASK		0x3
+#define	CLKCTRL_XTAL_DIV_UART_OFFSET		0
+
+#define	CLKCTRL_SSP_CLKGATE			(1 << 31)
+#define	CLKCTRL_SSP_BUSY			(1 << 29)
+#define	CLKCTRL_SSP_DIV_FRAC_EN			(1 << 9)
+#define	CLKCTRL_SSP_DIV_MASK			0x1ff
+#define	CLKCTRL_SSP_DIV_OFFSET			0
+
+#define	CLKCTRL_GPMI_CLKGATE			(1 << 31)
+#define	CLKCTRL_GPMI_BUSY			(1 << 29)
+#define	CLKCTRL_GPMI_DIV_FRAC_EN		(1 << 10)
+#define	CLKCTRL_GPMI_DIV_MASK			0x3ff
+#define	CLKCTRL_GPMI_DIV_OFFSET			0
+
+#define	CLKCTRL_SPDIF_CLKGATE			(1 << 31)
+
+#define	CLKCTRL_EMI_CLKGATE			(1 << 31)
+#define	CLKCTRL_EMI_SYNC_MODE_EN		(1 << 30)
+#define	CLKCTRL_EMI_BUSY_REF_XTAL		(1 << 29)
+#define	CLKCTRL_EMI_BUSY_REF_EMI		(1 << 28)
+#define	CLKCTRL_EMI_BUSY_REF_CPU		(1 << 27)
+#define	CLKCTRL_EMI_BUSY_SYNC_MODE		(1 << 26)
+#define	CLKCTRL_EMI_BUSY_DCC_RESYNC		(1 << 17)
+#define	CLKCTRL_EMI_DCC_RESYNC_ENABLE		(1 << 16)
+#define	CLKCTRL_EMI_DIV_XTAL_MASK		(0xf << 8)
+#define	CLKCTRL_EMI_DIV_XTAL_OFFSET		8
+#define	CLKCTRL_EMI_DIV_EMI_MASK		0x3f
+#define	CLKCTRL_EMI_DIV_EMI_OFFSET		0
+
+#define	CLKCTRL_SAIF0_CLKGATE			(1 << 31)
+#define	CLKCTRL_SAIF0_BUSY			(1 << 29)
+#define	CLKCTRL_SAIF0_DIV_FRAC_EN		(1 << 16)
+#define	CLKCTRL_SAIF0_DIV_MASK			0xffff
+#define	CLKCTRL_SAIF0_DIV_OFFSET		0
+
+#define	CLKCTRL_SAIF1_CLKGATE			(1 << 31)
+#define	CLKCTRL_SAIF1_BUSY			(1 << 29)
+#define	CLKCTRL_SAIF1_DIV_FRAC_EN		(1 << 16)
+#define	CLKCTRL_SAIF1_DIV_MASK			0xffff
+#define	CLKCTRL_SAIF1_DIV_OFFSET		0
+
+#define	CLKCTRL_DIS_LCDIF_CLKGATE		(1 << 31)
+#define	CLKCTRL_DIS_LCDIF_BUSY			(1 << 29)
+#define	CLKCTRL_DIS_LCDIF_DIV_FRAC_EN		(1 << 13)
+#define	CLKCTRL_DIS_LCDIF_DIV_MASK		0x1fff
+#define	CLKCTRL_DIS_LCDIF_DIV_OFFSET		0
+
+#define	CLKCTRL_ETM_CLKGATE			(1 << 31)
+#define	CLKCTRL_ETM_BUSY			(1 << 29)
+#define	CLKCTRL_ETM_DIV_FRAC_EN			(1 << 7)
+#define	CLKCTRL_ETM_DIV_MASK			0x7f
+#define	CLKCTRL_ETM_DIV_OFFSET			0
+
+#define	CLKCTRL_ENET_SLEEP			(1 << 31)
+#define	CLKCTRL_ENET_DISABLE			(1 << 30)
+#define	CLKCTRL_ENET_STATUS			(1 << 29)
+#define	CLKCTRL_ENET_BUSY_TIME			(1 << 27)
+#define	CLKCTRL_ENET_DIV_TIME_MASK		(0x3f << 21)
+#define	CLKCTRL_ENET_DIV_TIME_OFFSET		21
+#define	CLKCTRL_ENET_TIME_SEL_MASK		(0x3 << 19)
+#define	CLKCTRL_ENET_TIME_SEL_OFFSET		19
+#define	CLKCTRL_ENET_TIME_SEL_XTAL		(0x0 << 19)
+#define	CLKCTRL_ENET_TIME_SEL_PLL		(0x1 << 19)
+#define	CLKCTRL_ENET_TIME_SEL_RMII_CLK		(0x2 << 19)
+#define	CLKCTRL_ENET_TIME_SEL_UNDEFINED		(0x3 << 19)
+#define	CLKCTRL_ENET_CLK_OUT_EN			(1 << 18)
+#define	CLKCTRL_ENET_RESET_BY_SW_CHIP		(1 << 17)
+#define	CLKCTRL_ENET_RESET_BY_SW		(1 << 16)
+
+#define	CLKCTRL_HSADC_RESETB			(1 << 30)
+#define	CLKCTRL_HSADC_FREQDIV_MASK		(0x3 << 28)
+#define	CLKCTRL_HSADC_FREQDIV_OFFSET		28
+
+#define	CLKCTRL_FLEXCAN_STOP_CAN0		(1 << 30)
+#define	CLKCTRL_FLEXCAN_CAN0_STATUS		(1 << 29)
+#define	CLKCTRL_FLEXCAN_STOP_CAN1		(1 << 28)
+#define	CLKCTRL_FLEXCAN_CAN1_STATUS		(1 << 27)
+
+#define	CLKCTRL_FRAC_CLKGATE			(1 << 7)
+#define	CLKCTRL_FRAC_STABLE			(1 << 6)
+#define	CLKCTRL_FRAC_FRAC_MASK			0x3f
+#define	CLKCTRL_FRAC_FRAC_OFFSET		0
+#define	CLKCTRL_FRAC0_CPU			0
+#define	CLKCTRL_FRAC0_EMI			1
+#define	CLKCTRL_FRAC0_IO1			2
+#define	CLKCTRL_FRAC0_IO0			3
+#define	CLKCTRL_FRAC1_PIX			0
+#define	CLKCTRL_FRAC1_HSADC			1
+#define	CLKCTRL_FRAC1_GPMI			2
+
+#define	CLKCTRL_CLKSEQ_BYPASS_CPU		(1 << 18)
+#define	CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF		(1 << 14)
+#define	CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_BYPASS	(0x1 << 14)
+#define	CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_PFD	(0x0 << 14)
+#define	CLKCTRL_CLKSEQ_BYPASS_ETM		(1 << 8)
+#define	CLKCTRL_CLKSEQ_BYPASS_EMI		(1 << 7)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP3		(1 << 6)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP2		(1 << 5)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP1		(1 << 4)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP0		(1 << 3)
+#define	CLKCTRL_CLKSEQ_BYPASS_GPMI		(1 << 2)
+#define	CLKCTRL_CLKSEQ_BYPASS_SAIF1		(1 << 1)
+#define	CLKCTRL_CLKSEQ_BYPASS_SAIF0		(1 << 0)
+
+#define	CLKCTRL_RESET_WDOG_POR_DISABLE		(1 << 5)
+#define	CLKCTRL_RESET_EXTERNAL_RESET_ENABLE	(1 << 4)
+#define	CLKCTRL_RESET_THERMAL_RESET_ENABLE	(1 << 3)
+#define	CLKCTRL_RESET_THERMAL_RESET_DEFAULT	(1 << 2)
+#define	CLKCTRL_RESET_CHIP			(1 << 1)
+#define	CLKCTRL_RESET_DIG			(1 << 0)
+
+#define	CLKCTRL_STATUS_CPU_LIMIT_MASK		(0x3 << 30)
+#define	CLKCTRL_STATUS_CPU_LIMIT_OFFSET		30
+
+#define	CLKCTRL_VERSION_MAJOR_MASK		(0xff << 24)
+#define	CLKCTRL_VERSION_MAJOR_OFFSET		24
+#define	CLKCTRL_VERSION_MINOR_MASK		(0xff << 16)
+#define	CLKCTRL_VERSION_MINOR_OFFSET		16
+#define	CLKCTRL_VERSION_STEP_MASK		0xffff
+#define	CLKCTRL_VERSION_STEP_OFFSET		0
+
+#endif /* __MX28_REGS_CLKCTRL_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-digctl.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-digctl.h
new file mode 100644
index 000000000..219f58ba7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-digctl.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 DIGCTL Register Definitions
+ *
+ * Copyright (C) 2012 Robert Delien <robert@delien.nl>
+ */
+
+#ifndef __MX28_REGS_DIGCTL_H__
+#define __MX28_REGS_DIGCTL_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_digctl_regs {
+	mxs_reg_32(hw_digctl_ctrl)				/* 0x000 */
+	mxs_reg_32(hw_digctl_status)				/* 0x010 */
+	mxs_reg_32(hw_digctl_hclkcount)			/* 0x020 */
+	mxs_reg_32(hw_digctl_ramctrl)				/* 0x030 */
+	mxs_reg_32(hw_digctl_emi_status)			/* 0x040 */
+	mxs_reg_32(hw_digctl_read_margin)			/* 0x050 */
+	uint32_t	hw_digctl_writeonce;			/* 0x060 */
+	uint32_t	reserved_writeonce[3];
+	mxs_reg_32(hw_digctl_bist_ctl)				/* 0x070 */
+	mxs_reg_32(hw_digctl_bist_status)			/* 0x080 */
+	uint32_t	hw_digctl_entropy;			/* 0x090 */
+	uint32_t	reserved_entropy[3];
+	uint32_t	hw_digctl_entropy_latched;		/* 0x0a0 */
+	uint32_t	reserved_entropy_latched[3];
+
+	uint32_t	reserved1[4];
+
+	mxs_reg_32(hw_digctl_microseconds)			/* 0x0c0 */
+	uint32_t	hw_digctl_dbgrd;			/* 0x0d0 */
+	uint32_t	reserved_hw_digctl_dbgrd[3];
+	uint32_t	hw_digctl_dbg;				/* 0x0e0 */
+	uint32_t	reserved_hw_digctl_dbg[3];
+
+	uint32_t	reserved2[4];
+
+	mxs_reg_32(hw_digctl_usb_loopback)			/* 0x100 */
+	mxs_reg_32(hw_digctl_ocram_status0)			/* 0x110 */
+	mxs_reg_32(hw_digctl_ocram_status1)			/* 0x120 */
+	mxs_reg_32(hw_digctl_ocram_status2)			/* 0x130 */
+	mxs_reg_32(hw_digctl_ocram_status3)			/* 0x140 */
+	mxs_reg_32(hw_digctl_ocram_status4)			/* 0x150 */
+	mxs_reg_32(hw_digctl_ocram_status5)			/* 0x160 */
+	mxs_reg_32(hw_digctl_ocram_status6)			/* 0x170 */
+	mxs_reg_32(hw_digctl_ocram_status7)			/* 0x180 */
+	mxs_reg_32(hw_digctl_ocram_status8)			/* 0x190 */
+	mxs_reg_32(hw_digctl_ocram_status9)			/* 0x1a0 */
+	mxs_reg_32(hw_digctl_ocram_status10)			/* 0x1b0 */
+	mxs_reg_32(hw_digctl_ocram_status11)			/* 0x1c0 */
+	mxs_reg_32(hw_digctl_ocram_status12)			/* 0x1d0 */
+	mxs_reg_32(hw_digctl_ocram_status13)			/* 0x1e0 */
+
+	uint32_t	reserved3[36];
+
+	uint32_t	hw_digctl_scratch0;			/* 0x280 */
+	uint32_t	reserved_hw_digctl_scratch0[3];
+	uint32_t	hw_digctl_scratch1;			/* 0x290 */
+	uint32_t	reserved_hw_digctl_scratch1[3];
+	uint32_t	hw_digctl_armcache;			/* 0x2a0 */
+	uint32_t	reserved_hw_digctl_armcache[3];
+	mxs_reg_32(hw_digctl_debug_trap)			/* 0x2b0 */
+	uint32_t	hw_digctl_debug_trap_l0_addr_low;	/* 0x2c0 */
+	uint32_t	reserved_hw_digctl_debug_trap_l0_addr_low[3];
+	uint32_t	hw_digctl_debug_trap_l0_addr_high;	/* 0x2d0 */
+	uint32_t	reserved_hw_digctl_debug_trap_l0_addr_high[3];
+	uint32_t	hw_digctl_debug_trap_l3_addr_low;	/* 0x2e0 */
+	uint32_t	reserved_hw_digctl_debug_trap_l3_addr_low[3];
+	uint32_t	hw_digctl_debug_trap_l3_addr_high;	/* 0x2f0 */
+	uint32_t	reserved_hw_digctl_debug_trap_l3_addr_high[3];
+	uint32_t	hw_digctl_fsl;				/* 0x300 */
+	uint32_t	reserved_hw_digctl_fsl[3];
+	uint32_t	hw_digctl_chipid;			/* 0x310 */
+	uint32_t	reserved_hw_digctl_chipid[3];
+
+	uint32_t	reserved4[4];
+
+	uint32_t	hw_digctl_ahb_stats_select;		/* 0x330 */
+	uint32_t	reserved_hw_digctl_ahb_stats_select[3];
+
+	uint32_t	reserved5[12];
+
+	uint32_t	hw_digctl_l1_ahb_active_cycles;		/* 0x370 */
+	uint32_t	reserved_hw_digctl_l1_ahb_active_cycles[3];
+	uint32_t	hw_digctl_l1_ahb_data_stalled;		/* 0x380 */
+	uint32_t	reserved_hw_digctl_l1_ahb_data_stalled[3];
+	uint32_t	hw_digctl_l1_ahb_data_cycles;		/* 0x390 */
+	uint32_t	reserved_hw_digctl_l1_ahb_data_cycles[3];
+	uint32_t	hw_digctl_l2_ahb_active_cycles;		/* 0x3a0 */
+	uint32_t	reserved_hw_digctl_l2_ahb_active_cycles[3];
+	uint32_t	hw_digctl_l2_ahb_data_stalled;		/* 0x3b0 */
+	uint32_t	reserved_hw_digctl_l2_ahb_data_stalled[3];
+	uint32_t	hw_digctl_l2_ahb_data_cycles;		/* 0x3c0 */
+	uint32_t	reserved_hw_digctl_l2_ahb_data_cycles[3];
+	uint32_t	hw_digctl_l3_ahb_active_cycles;		/* 0x3d0 */
+	uint32_t	reserved_hw_digctl_l3_ahb_active_cycles[3];
+	uint32_t	hw_digctl_l3_ahb_data_stalled;		/* 0x3e0 */
+	uint32_t	reserved_hw_digctl_l3_ahb_data_stalled[3];
+	uint32_t	hw_digctl_l3_ahb_data_cycles;		/* 0x3f0 */
+	uint32_t	reserved_hw_digctl_l3_ahb_data_cycles[3];
+
+	uint32_t	reserved6[64];
+
+	uint32_t	hw_digctl_mpte0_loc;			/* 0x500 */
+	uint32_t	reserved_hw_digctl_mpte0_loc[3];
+	uint32_t	hw_digctl_mpte1_loc;			/* 0x510 */
+	uint32_t	reserved_hw_digctl_mpte1_loc[3];
+	uint32_t	hw_digctl_mpte2_loc;			/* 0x520 */
+	uint32_t	reserved_hw_digctl_mpte2_loc[3];
+	uint32_t	hw_digctl_mpte3_loc;			/* 0x530 */
+	uint32_t	reserved_hw_digctl_mpte3_loc[3];
+	uint32_t	hw_digctl_mpte4_loc;			/* 0x540 */
+	uint32_t	reserved_hw_digctl_mpte4_loc[3];
+	uint32_t	hw_digctl_mpte5_loc;			/* 0x550 */
+	uint32_t	reserved_hw_digctl_mpte5_loc[3];
+	uint32_t	hw_digctl_mpte6_loc;			/* 0x560 */
+	uint32_t	reserved_hw_digctl_mpte6_loc[3];
+	uint32_t	hw_digctl_mpte7_loc;			/* 0x570 */
+	uint32_t	reserved_hw_digctl_mpte7_loc[3];
+	uint32_t	hw_digctl_mpte8_loc;			/* 0x580 */
+	uint32_t	reserved_hw_digctl_mpte8_loc[3];
+	uint32_t	hw_digctl_mpte9_loc;			/* 0x590 */
+	uint32_t	reserved_hw_digctl_mpte9_loc[3];
+	uint32_t	hw_digctl_mpte10_loc;			/* 0x5a0 */
+	uint32_t	reserved_hw_digctl_mpte10_loc[3];
+	uint32_t	hw_digctl_mpte11_loc;			/* 0x5b0 */
+	uint32_t	reserved_hw_digctl_mpte11_loc[3];
+	uint32_t	hw_digctl_mpte12_loc;			/* 0x5c0 */
+	uint32_t	reserved_hw_digctl_mpte12_loc[3];
+	uint32_t	hw_digctl_mpte13_loc;			/* 0x5d0 */
+	uint32_t	reserved_hw_digctl_mpte13_loc[3];
+	uint32_t	hw_digctl_mpte14_loc;			/* 0x5e0 */
+	uint32_t	reserved_hw_digctl_mpte14_loc[3];
+	uint32_t	hw_digctl_mpte15_loc;			/* 0x5f0 */
+	uint32_t	reserved_hw_digctl_mpte15_loc[3];
+};
+#endif
+
+/* Product code identification */
+#define HW_DIGCTL_CHIPID_MASK	(0xffff << 16)
+#define HW_DIGCTL_CHIPID_MX23	(0x3780 << 16)
+#define HW_DIGCTL_CHIPID_MX28	(0x2800 << 16)
+
+#endif /* __MX28_REGS_DIGCTL_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-i2c.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-i2c.h
new file mode 100644
index 000000000..4cc2e0ba5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-i2c.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 I2C Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef __MX28_REGS_I2C_H__
+#define __MX28_REGS_I2C_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_i2c_regs {
+	mxs_reg_32(hw_i2c_ctrl0)
+	mxs_reg_32(hw_i2c_timing0)
+	mxs_reg_32(hw_i2c_timing1)
+	mxs_reg_32(hw_i2c_timing2)
+	mxs_reg_32(hw_i2c_ctrl1)
+	mxs_reg_32(hw_i2c_stat)
+	mxs_reg_32(hw_i2c_queuectrl)
+	mxs_reg_32(hw_i2c_queuestat)
+	mxs_reg_32(hw_i2c_queuecmd)
+	mxs_reg_32(hw_i2c_queuedata)
+	mxs_reg_32(hw_i2c_data)
+	mxs_reg_32(hw_i2c_debug0)
+	mxs_reg_32(hw_i2c_debug1)
+	mxs_reg_32(hw_i2c_version)
+};
+#endif
+
+#define	I2C_CTRL_SFTRST				(1 << 31)
+#define	I2C_CTRL_CLKGATE			(1 << 30)
+#define	I2C_CTRL_RUN				(1 << 29)
+#define	I2C_CTRL_PREACK				(1 << 27)
+#define	I2C_CTRL_ACKNOWLEDGE			(1 << 26)
+#define	I2C_CTRL_SEND_NAK_ON_LAST		(1 << 25)
+#define	I2C_CTRL_MULTI_MASTER			(1 << 23)
+#define	I2C_CTRL_CLOCK_HELD			(1 << 22)
+#define	I2C_CTRL_RETAIN_CLOCK			(1 << 21)
+#define	I2C_CTRL_POST_SEND_STOP			(1 << 20)
+#define	I2C_CTRL_PRE_SEND_START			(1 << 19)
+#define	I2C_CTRL_SLAVE_ADDRESS_ENABLE		(1 << 18)
+#define	I2C_CTRL_MASTER_MODE			(1 << 17)
+#define	I2C_CTRL_DIRECTION			(1 << 16)
+#define	I2C_CTRL_XFER_COUNT_MASK		0xffff
+#define	I2C_CTRL_XFER_COUNT_OFFSET		0
+
+#define	I2C_TIMING0_HIGH_COUNT_MASK		(0x3ff << 16)
+#define	I2C_TIMING0_HIGH_COUNT_OFFSET		16
+#define	I2C_TIMING0_RCV_COUNT_MASK		0x3ff
+#define	I2C_TIMING0_RCV_COUNT_OFFSET		0
+
+#define	I2C_TIMING1_LOW_COUNT_MASK		(0x3ff << 16)
+#define	I2C_TIMING1_LOW_COUNT_OFFSET		16
+#define	I2C_TIMING1_XMIT_COUNT_MASK		0x3ff
+#define	I2C_TIMING1_XMIT_COUNT_OFFSET		0
+
+#define	I2C_TIMING2_BUS_FREE_MASK		(0x3ff << 16)
+#define	I2C_TIMING2_BUS_FREE_OFFSET		16
+#define	I2C_TIMING2_LEADIN_COUNT_MASK		0x3ff
+#define	I2C_TIMING2_LEADIN_COUNT_OFFSET		0
+
+#define	I2C_CTRL1_RD_QUEUE_IRQ			(1 << 30)
+#define	I2C_CTRL1_WR_QUEUE_IRQ			(1 << 29)
+#define	I2C_CTRL1_CLR_GOT_A_NAK			(1 << 28)
+#define	I2C_CTRL1_ACK_MODE			(1 << 27)
+#define	I2C_CTRL1_FORCE_DATA_IDLE		(1 << 26)
+#define	I2C_CTRL1_FORCE_CLK_IDLE		(1 << 25)
+#define	I2C_CTRL1_BCAST_SLAVE_EN		(1 << 24)
+#define	I2C_CTRL1_SLAVE_ADDRESS_BYTE_MASK	(0xff << 16)
+#define	I2C_CTRL1_SLAVE_ADDRESS_BYTE_OFFSET	16
+#define	I2C_CTRL1_BUS_FREE_IRQ_EN		(1 << 15)
+#define	I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ_EN	(1 << 14)
+#define	I2C_CTRL1_NO_SLAVE_ACK_IRQ_EN		(1 << 13)
+#define	I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ_EN	(1 << 12)
+#define	I2C_CTRL1_EARLY_TERM_IRQ_EN		(1 << 11)
+#define	I2C_CTRL1_MASTER_LOSS_IRQ_EN		(1 << 10)
+#define	I2C_CTRL1_SLAVE_STOP_IRQ_EN		(1 << 9)
+#define	I2C_CTRL1_SLAVE_IRQ_EN			(1 << 8)
+#define	I2C_CTRL1_BUS_FREE_IRQ			(1 << 7)
+#define	I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ		(1 << 6)
+#define	I2C_CTRL1_NO_SLAVE_ACK_IRQ		(1 << 5)
+#define	I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	(1 << 4)
+#define	I2C_CTRL1_EARLY_TERM_IRQ		(1 << 3)
+#define	I2C_CTRL1_MASTER_LOSS_IRQ		(1 << 2)
+#define	I2C_CTRL1_SLAVE_STOP_IRQ		(1 << 1)
+#define	I2C_CTRL1_SLAVE_IRQ			(1 << 0)
+
+#define	I2C_STAT_MASTER_PRESENT			(1 << 31)
+#define	I2C_STAT_SLAVE_PRESENT			(1 << 30)
+#define	I2C_STAT_ANY_ENABLED_IRQ		(1 << 29)
+#define	I2C_STAT_GOT_A_NAK			(1 << 28)
+#define	I2C_STAT_RCVD_SLAVE_ADDR_MASK		(0xff << 16)
+#define	I2C_STAT_RCVD_SLAVE_ADDR_OFFSET		16
+#define	I2C_STAT_SLAVE_ADDR_EQ_ZERO		(1 << 15)
+#define	I2C_STAT_SLAVE_FOUND			(1 << 14)
+#define	I2C_STAT_SLAVE_SEARCHING		(1 << 13)
+#define	I2C_STAT_DATA_ENGING_DMA_WAIT		(1 << 12)
+#define	I2C_STAT_BUS_BUSY			(1 << 11)
+#define	I2C_STAT_CLK_GEN_BUSY			(1 << 10)
+#define	I2C_STAT_DATA_ENGINE_BUSY		(1 << 9)
+#define	I2C_STAT_SLAVE_BUSY			(1 << 8)
+#define	I2C_STAT_BUS_FREE_IRQ_SUMMARY		(1 << 7)
+#define	I2C_STAT_DATA_ENGINE_CMPLT_IRQ_SUMMARY	(1 << 6)
+#define	I2C_STAT_NO_SLAVE_ACK_IRQ_SUMMARY	(1 << 5)
+#define	I2C_STAT_OVERSIZE_XFER_TERM_IRQ_SUMMARY	(1 << 4)
+#define	I2C_STAT_EARLY_TERM_IRQ_SUMMARY		(1 << 3)
+#define	I2C_STAT_MASTER_LOSS_IRQ_SUMMARY	(1 << 2)
+#define	I2C_STAT_SLAVE_STOP_IRQ_SUMMARY		(1 << 1)
+#define	I2C_STAT_SLAVE_IRQ_SUMMARY		(1 << 0)
+
+#define	I2C_QUEUECTRL_RD_THRESH_MASK		(0x1f << 16)
+#define	I2C_QUEUECTRL_RD_THRESH_OFFSET		16
+#define	I2C_QUEUECTRL_WR_THRESH_MASK		(0x1f << 8)
+#define	I2C_QUEUECTRL_WR_THRESH_OFFSET		8
+#define	I2C_QUEUECTRL_QUEUE_RUN			(1 << 5)
+#define	I2C_QUEUECTRL_RD_CLEAR			(1 << 4)
+#define	I2C_QUEUECTRL_WR_CLEAR			(1 << 3)
+#define	I2C_QUEUECTRL_PIO_QUEUE_MODE		(1 << 2)
+#define	I2C_QUEUECTRL_RD_QUEUE_IRQ_EN		(1 << 1)
+#define	I2C_QUEUECTRL_WR_QUEUE_IRQ_EN		(1 << 0)
+
+#define	I2C_QUEUESTAT_RD_QUEUE_FULL		(1 << 14)
+#define	I2C_QUEUESTAT_RD_QUEUE_EMPTY		(1 << 13)
+#define	I2C_QUEUESTAT_RD_QUEUE_CNT_MASK		(0x1f << 8)
+#define	I2C_QUEUESTAT_RD_QUEUE_CNT_OFFSET	8
+#define	I2C_QUEUESTAT_WR_QUEUE_FULL		(1 << 6)
+#define	I2C_QUEUESTAT_WR_QUEUE_EMPTY		(1 << 5)
+#define	I2C_QUEUESTAT_WR_QUEUE_CNT_MASK		0x1f
+#define	I2C_QUEUESTAT_WR_QUEUE_CNT_OFFSET	0
+
+#define	I2C_QUEUECMD_PREACK			(1 << 27)
+#define	I2C_QUEUECMD_ACKNOWLEDGE		(1 << 26)
+#define	I2C_QUEUECMD_SEND_NAK_ON_LAST		(1 << 25)
+#define	I2C_QUEUECMD_MULTI_MASTER		(1 << 23)
+#define	I2C_QUEUECMD_CLOCK_HELD			(1 << 22)
+#define	I2C_QUEUECMD_RETAIN_CLOCK		(1 << 21)
+#define	I2C_QUEUECMD_POST_SEND_STOP		(1 << 20)
+#define	I2C_QUEUECMD_PRE_SEND_START		(1 << 19)
+#define	I2C_QUEUECMD_SLAVE_ADDRESS_ENABLE	(1 << 18)
+#define	I2C_QUEUECMD_MASTER_MODE		(1 << 17)
+#define	I2C_QUEUECMD_DIRECTION			(1 << 16)
+#define	I2C_QUEUECMD_XFER_COUNT_MASK		0xffff
+#define	I2C_QUEUECMD_XFER_COUNT_OFFSET		0
+
+#define	I2C_QUEUEDATA_DATA_MASK			0xffffffff
+#define	I2C_QUEUEDATA_DATA_OFFSET		0
+
+#define	I2C_DATA_DATA_MASK			0xffffffff
+#define	I2C_DATA_DATA_OFFSET			0
+
+#define	I2C_DEBUG0_DMAREQ			(1 << 31)
+#define	I2C_DEBUG0_DMAENDCMD			(1 << 30)
+#define	I2C_DEBUG0_DMAKICK			(1 << 29)
+#define	I2C_DEBUG0_DMATERMINATE			(1 << 28)
+#define	I2C_DEBUG0_STATE_VALUE_MASK		(0x3 << 26)
+#define	I2C_DEBUG0_STATE_VALUE_OFFSET		26
+#define	I2C_DEBUG0_DMA_STATE_MASK		(0x3ff << 16)
+#define	I2C_DEBUG0_DMA_STATE_OFFSET		16
+#define	I2C_DEBUG0_START_TOGGLE			(1 << 15)
+#define	I2C_DEBUG0_STOP_TOGGLE			(1 << 14)
+#define	I2C_DEBUG0_GRAB_TOGGLE			(1 << 13)
+#define	I2C_DEBUG0_CHANGE_TOGGLE		(1 << 12)
+#define	I2C_DEBUG0_STATE_LATCH			(1 << 11)
+#define	I2C_DEBUG0_SLAVE_HOLD_CLK		(1 << 10)
+#define	I2C_DEBUG0_STATE_STATE_MASK		0x3ff
+#define	I2C_DEBUG0_STATE_STATE_OFFSET		0
+
+#define	I2C_DEBUG1_I2C_CLK_IN			(1 << 31)
+#define	I2C_DEBUG1_I2C_DATA_IN			(1 << 30)
+#define	I2C_DEBUG1_DMA_BYTE_ENABLES_MASK	(0xf << 24)
+#define	I2C_DEBUG1_DMA_BYTE_ENABLES_OFFSET	24
+#define	I2C_DEBUG1_CLK_GEN_STATE_MASK		(0xff << 16)
+#define	I2C_DEBUG1_CLK_GEN_STATE_OFFSET		16
+#define	I2C_DEBUG1_LST_MODE_MASK		(0x3 << 9)
+#define	I2C_DEBUG1_LST_MODE_OFFSET		9
+#define	I2C_DEBUG1_LOCAL_SLAVE_TEST		(1 << 8)
+#define	I2C_DEBUG1_FORCE_CLK_ON			(1 << 4)
+#define	I2C_DEBUG1_FORCE_ABR_LOSS		(1 << 3)
+#define	I2C_DEBUG1_FORCE_RCV_ACK		(1 << 2)
+#define	I2C_DEBUG1_FORCE_I2C_DATA_OE		(1 << 1)
+#define	I2C_DEBUG1_FORCE_I2C_CLK_OE		(1 << 0)
+
+#define	I2C_VERSION_MAJOR_MASK			(0xff << 24)
+#define	I2C_VERSION_MAJOR_OFFSET		24
+#define	I2C_VERSION_MINOR_MASK			(0xff << 16)
+#define	I2C_VERSION_MINOR_OFFSET		16
+#define	I2C_VERSION_STEP_MASK			0xffff
+#define	I2C_VERSION_STEP_OFFSET			0
+
+#endif	/* __MX28_REGS_I2C_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-lradc.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-lradc.h
new file mode 100644
index 000000000..a48f7a435
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-lradc.h
@@ -0,0 +1,386 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 LRADC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MX28_REGS_LRADC_H__
+#define __MX28_REGS_LRADC_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_lradc_regs {
+	mxs_reg_32(hw_lradc_ctrl0);
+	mxs_reg_32(hw_lradc_ctrl1);
+	mxs_reg_32(hw_lradc_ctrl2);
+	mxs_reg_32(hw_lradc_ctrl3);
+	mxs_reg_32(hw_lradc_status);
+	mxs_reg_32(hw_lradc_ch0);
+	mxs_reg_32(hw_lradc_ch1);
+	mxs_reg_32(hw_lradc_ch2);
+	mxs_reg_32(hw_lradc_ch3);
+	mxs_reg_32(hw_lradc_ch4);
+	mxs_reg_32(hw_lradc_ch5);
+	mxs_reg_32(hw_lradc_ch6);
+	mxs_reg_32(hw_lradc_ch7);
+	mxs_reg_32(hw_lradc_delay0);
+	mxs_reg_32(hw_lradc_delay1);
+	mxs_reg_32(hw_lradc_delay2);
+	mxs_reg_32(hw_lradc_delay3);
+	mxs_reg_32(hw_lradc_debug0);
+	mxs_reg_32(hw_lradc_debug1);
+	mxs_reg_32(hw_lradc_conversion);
+	mxs_reg_32(hw_lradc_ctrl4);
+	mxs_reg_32(hw_lradc_treshold0);
+	mxs_reg_32(hw_lradc_treshold1);
+	mxs_reg_32(hw_lradc_version);
+};
+#endif
+
+#define	LRADC_CTRL0_SFTRST					(1 << 31)
+#define	LRADC_CTRL0_CLKGATE					(1 << 30)
+#define	LRADC_CTRL0_ONCHIP_GROUNDREF				(1 << 26)
+#define	LRADC_CTRL0_BUTTON1_DETECT_ENABLE			(1 << 25)
+#define	LRADC_CTRL0_BUTTON0_DETECT_ENABLE			(1 << 24)
+#define	LRADC_CTRL0_TOUCH_DETECT_ENABLE				(1 << 23)
+#define	LRADC_CTRL0_TOUCH_SCREEN_TYPE				(1 << 22)
+#define	LRADC_CTRL0_YNLRSW					(1 << 21)
+#define	LRADC_CTRL0_YPLLSW_MASK					(0x3 << 19)
+#define	LRADC_CTRL0_YPLLSW_OFFSET				19
+#define	LRADC_CTRL0_XNURSW_MASK					(0x3 << 17)
+#define	LRADC_CTRL0_XNURSW_OFFSET				17
+#define	LRADC_CTRL0_XPULSW					(1 << 16)
+#define	LRADC_CTRL0_SCHEDULE_MASK				0xff
+#define	LRADC_CTRL0_SCHEDULE_OFFSET				0
+
+#define	LRADC_CTRL1_BUTTON1_DETECT_IRQ_EN			(1 << 28)
+#define	LRADC_CTRL1_BUTTON0_DETECT_IRQ_EN			(1 << 27)
+#define	LRADC_CTRL1_THRESHOLD1_DETECT_IRQ_EN			(1 << 26)
+#define	LRADC_CTRL1_THRESHOLD0_DETECT_IRQ_EN			(1 << 25)
+#define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN				(1 << 24)
+#define	LRADC_CTRL1_LRADC7_IRQ_EN				(1 << 23)
+#define	LRADC_CTRL1_LRADC6_IRQ_EN				(1 << 22)
+#define	LRADC_CTRL1_LRADC5_IRQ_EN				(1 << 21)
+#define	LRADC_CTRL1_LRADC4_IRQ_EN				(1 << 20)
+#define	LRADC_CTRL1_LRADC3_IRQ_EN				(1 << 19)
+#define	LRADC_CTRL1_LRADC2_IRQ_EN				(1 << 18)
+#define	LRADC_CTRL1_LRADC1_IRQ_EN				(1 << 17)
+#define	LRADC_CTRL1_LRADC0_IRQ_EN				(1 << 16)
+#define	LRADC_CTRL1_BUTTON1_DETECT_IRQ				(1 << 12)
+#define	LRADC_CTRL1_BUTTON0_DETECT_IRQ				(1 << 11)
+#define	LRADC_CTRL1_THRESHOLD1_DETECT_IRQ			(1 << 10)
+#define	LRADC_CTRL1_THRESHOLD0_DETECT_IRQ			(1 << 9)
+#define	LRADC_CTRL1_TOUCH_DETECT_IRQ				(1 << 8)
+#define	LRADC_CTRL1_LRADC7_IRQ					(1 << 7)
+#define	LRADC_CTRL1_LRADC6_IRQ					(1 << 6)
+#define	LRADC_CTRL1_LRADC5_IRQ					(1 << 5)
+#define	LRADC_CTRL1_LRADC4_IRQ					(1 << 4)
+#define	LRADC_CTRL1_LRADC3_IRQ					(1 << 3)
+#define	LRADC_CTRL1_LRADC2_IRQ					(1 << 2)
+#define	LRADC_CTRL1_LRADC1_IRQ					(1 << 1)
+#define	LRADC_CTRL1_LRADC0_IRQ					(1 << 0)
+
+#define	LRADC_CTRL2_DIVIDE_BY_TWO_MASK				(0xff << 24)
+#define	LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET			24
+#define	LRADC_CTRL2_TEMPSENSE_PWD				(1 << 15)
+#define	LRADC_CTRL2_VTHSENSE_MASK				(0x3 << 13)
+#define	LRADC_CTRL2_VTHSENSE_OFFSET				13
+#define	LRADC_CTRL2_DISABLE_MUXAMP_BYPASS			(1 << 12)
+#define	LRADC_CTRL2_TEMP_SENSOR_IENABLE1			(1 << 9)
+#define	LRADC_CTRL2_TEMP_SENSOR_IENABLE0			(1 << 8)
+#define	LRADC_CTRL2_TEMP_ISRC1_MASK				(0xf << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_OFFSET				4
+#define	LRADC_CTRL2_TEMP_ISRC1_300				(0xf << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_280				(0xe << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_260				(0xd << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_240				(0xc << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_220				(0xb << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_200				(0xa << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_180				(0x9 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_160				(0x8 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_140				(0x7 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_120				(0x6 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_100				(0x5 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_80				(0x4 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_60				(0x3 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_40				(0x2 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_20				(0x1 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_ZERO				(0x0 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC0_MASK				(0xf << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_OFFSET				0
+#define	LRADC_CTRL2_TEMP_ISRC0_300				(0xf << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_280				(0xe << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_260				(0xd << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_240				(0xc << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_220				(0xb << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_200				(0xa << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_180				(0x9 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_160				(0x8 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_140				(0x7 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_120				(0x6 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_100				(0x5 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_80				(0x4 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_60				(0x3 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_40				(0x2 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_20				(0x1 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_ZERO				(0x0 << 0)
+
+#define	LRADC_CTRL3_DISCARD_MASK				(0x3 << 24)
+#define	LRADC_CTRL3_DISCARD_OFFSET				24
+#define	LRADC_CTRL3_DISCARD_1_SAMPLE				(0x1 << 24)
+#define	LRADC_CTRL3_DISCARD_2_SAMPLES				(0x2 << 24)
+#define	LRADC_CTRL3_DISCARD_3_SAMPLES				(0x3 << 24)
+#define	LRADC_CTRL3_FORCE_ANALOG_PWUP				(1 << 23)
+#define	LRADC_CTRL3_FORCE_ANALOG_PWDN				(1 << 22)
+#define	LRADC_CTRL3_CYCLE_TIME_MASK				(0x3 << 8)
+#define	LRADC_CTRL3_CYCLE_TIME_OFFSET				8
+#define	LRADC_CTRL3_CYCLE_TIME_6MHZ				(0x0 << 8)
+#define	LRADC_CTRL3_CYCLE_TIME_4MHZ				(0x1 << 8)
+#define	LRADC_CTRL3_CYCLE_TIME_3MHZ				(0x2 << 8)
+#define	LRADC_CTRL3_CYCLE_TIME_2MHZ				(0x3 << 8)
+#define	LRADC_CTRL3_HIGH_TIME_MASK				(0x3 << 4)
+#define	LRADC_CTRL3_HIGH_TIME_OFFSET				4
+#define	LRADC_CTRL3_HIGH_TIME_42NS				(0x0 << 4)
+#define	LRADC_CTRL3_HIGH_TIME_83NS				(0x1 << 4)
+#define	LRADC_CTRL3_HIGH_TIME_125NS				(0x2 << 4)
+#define	LRADC_CTRL3_HIGH_TIME_250NS				(0x3 << 4)
+#define	LRADC_CTRL3_DELAY_CLOCK					(1 << 1)
+#define	LRADC_CTRL3_INVERT_CLOCK				(1 << 0)
+
+#define	LRADC_STATUS_BUTTON1_PRESENT				(1 << 28)
+#define	LRADC_STATUS_BUTTON0_PRESENT				(1 << 27)
+#define	LRADC_STATUS_TEMP1_PRESENT				(1 << 26)
+#define	LRADC_STATUS_TEMP0_PRESENT				(1 << 25)
+#define	LRADC_STATUS_TOUCH_PANEL_PRESENT			(1 << 24)
+#define	LRADC_STATUS_CHANNEL7_PRESENT				(1 << 23)
+#define	LRADC_STATUS_CHANNEL6_PRESENT				(1 << 22)
+#define	LRADC_STATUS_CHANNEL5_PRESENT				(1 << 21)
+#define	LRADC_STATUS_CHANNEL4_PRESENT				(1 << 20)
+#define	LRADC_STATUS_CHANNEL3_PRESENT				(1 << 19)
+#define	LRADC_STATUS_CHANNEL2_PRESENT				(1 << 18)
+#define	LRADC_STATUS_CHANNEL1_PRESENT				(1 << 17)
+#define	LRADC_STATUS_CHANNEL0_PRESENT				(1 << 16)
+#define	LRADC_STATUS_BUTTON1_DETECT_RAW				(1 << 2)
+#define	LRADC_STATUS_BUTTON0_DETECT_RAW				(1 << 1)
+#define	LRADC_STATUS_TOUCH_DETECT_RAW				(1 << 0)
+
+#define	LRADC_CH_TOGGLE						(1 << 31)
+#define	LRADC_CH7_TESTMODE_TOGGLE				(1 << 30)
+#define	LRADC_CH_ACCUMULATE					(1 << 29)
+#define	LRADC_CH_NUM_SAMPLES_MASK				(0x1f << 24)
+#define	LRADC_CH_NUM_SAMPLES_OFFSET				24
+#define	LRADC_CH_VALUE_MASK					0x3ffff
+#define	LRADC_CH_VALUE_OFFSET					0
+
+#define	LRADC_DELAY_TRIGGER_LRADCS_MASK				(0xff << 24)
+#define	LRADC_DELAY_TRIGGER_LRADCS_OFFSET			24
+#define	LRADC_DELAY_KICK					(1 << 20)
+#define	LRADC_DELAY_TRIGGER_DELAYS_MASK				(0xf << 16)
+#define	LRADC_DELAY_TRIGGER_DELAYS_OFFSET			16
+#define	LRADC_DELAY_LOOP_COUNT_MASK				(0x1f << 11)
+#define	LRADC_DELAY_LOOP_COUNT_OFFSET				11
+#define	LRADC_DELAY_DELAY_MASK					0x7ff
+#define	LRADC_DELAY_DELAY_OFFSET				0
+
+#define	LRADC_DEBUG0_READONLY_MASK				(0xffff << 16)
+#define	LRADC_DEBUG0_READONLY_OFFSET				16
+#define	LRADC_DEBUG0_STATE_MASK					(0xfff << 0)
+#define	LRADC_DEBUG0_STATE_OFFSET				0
+
+#define	LRADC_DEBUG1_REQUEST_MASK				(0xff << 16)
+#define	LRADC_DEBUG1_REQUEST_OFFSET				16
+#define	LRADC_DEBUG1_TESTMODE_COUNT_MASK			(0x1f << 8)
+#define	LRADC_DEBUG1_TESTMODE_COUNT_OFFSET			8
+#define	LRADC_DEBUG1_TESTMODE6					(1 << 2)
+#define	LRADC_DEBUG1_TESTMODE5					(1 << 1)
+#define	LRADC_DEBUG1_TESTMODE					(1 << 0)
+
+#define	LRADC_CONVERSION_AUTOMATIC				(1 << 20)
+#define	LRADC_CONVERSION_SCALE_FACTOR_MASK			(0x3 << 16)
+#define	LRADC_CONVERSION_SCALE_FACTOR_OFFSET			16
+#define	LRADC_CONVERSION_SCALE_FACTOR_NIMH			(0x0 << 16)
+#define	LRADC_CONVERSION_SCALE_FACTOR_DUAL_NIMH			(0x1 << 16)
+#define	LRADC_CONVERSION_SCALE_FACTOR_LI_ION			(0x2 << 16)
+#define	LRADC_CONVERSION_SCALE_FACTOR_ALT_LI_ION		(0x3 << 16)
+#define	LRADC_CONVERSION_SCALED_BATT_VOLTAGE_MASK		0x3ff
+#define	LRADC_CONVERSION_SCALED_BATT_VOLTAGE_OFFSET		0
+
+#define	LRADC_CTRL4_LRADC7SELECT_MASK				(0xf << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_OFFSET				28
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL0			(0x0 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL1			(0x1 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL2			(0x2 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL3			(0x3 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL4			(0x4 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL5			(0x5 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL6			(0x6 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL7			(0x7 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL8			(0x8 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL9			(0x9 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL10			(0xa << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL11			(0xb << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL12			(0xc << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL13			(0xd << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL14			(0xe << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL15			(0xf << 28)
+#define	LRADC_CTRL4_LRADC6SELECT_MASK				(0xf << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_OFFSET				24
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL0			(0x0 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL1			(0x1 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL2			(0x2 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL3			(0x3 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL4			(0x4 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL5			(0x5 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL6			(0x6 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL7			(0x7 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL8			(0x8 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL9			(0x9 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL10			(0xa << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL11			(0xb << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL12			(0xc << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL13			(0xd << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL14			(0xe << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL15			(0xf << 24)
+#define	LRADC_CTRL4_LRADC5SELECT_MASK				(0xf << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_OFFSET				20
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL0			(0x0 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL1			(0x1 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL2			(0x2 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL3			(0x3 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL4			(0x4 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL5			(0x5 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL6			(0x6 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL7			(0x7 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL8			(0x8 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL9			(0x9 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL10			(0xa << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL11			(0xb << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL12			(0xc << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL13			(0xd << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL14			(0xe << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL15			(0xf << 20)
+#define	LRADC_CTRL4_LRADC4SELECT_MASK				(0xf << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_OFFSET				16
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL0			(0x0 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL1			(0x1 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL2			(0x2 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL3			(0x3 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL4			(0x4 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL5			(0x5 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL6			(0x6 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL7			(0x7 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL8			(0x8 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL9			(0x9 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL10			(0xa << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL11			(0xb << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL12			(0xc << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL13			(0xd << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL14			(0xe << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL15			(0xf << 16)
+#define	LRADC_CTRL4_LRADC3SELECT_MASK				(0xf << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_OFFSET				12
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL0			(0x0 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL1			(0x1 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL2			(0x2 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL3			(0x3 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL4			(0x4 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL5			(0x5 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL6			(0x6 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL7			(0x7 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL8			(0x8 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL9			(0x9 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL10			(0xa << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL11			(0xb << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL12			(0xc << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL13			(0xd << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL14			(0xe << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL15			(0xf << 12)
+#define	LRADC_CTRL4_LRADC2SELECT_MASK				(0xf << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_OFFSET				8
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL0			(0x0 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL1			(0x1 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL2			(0x2 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL3			(0x3 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL4			(0x4 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL5			(0x5 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL6			(0x6 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL7			(0x7 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL8			(0x8 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL9			(0x9 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL10			(0xa << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL11			(0xb << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL12			(0xc << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL13			(0xd << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL14			(0xe << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL15			(0xf << 8)
+#define	LRADC_CTRL4_LRADC1SELECT_MASK				(0xf << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_OFFSET				4
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL0			(0x0 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL1			(0x1 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL2			(0x2 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL3			(0x3 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL4			(0x4 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL5			(0x5 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL6			(0x6 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL7			(0x7 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL8			(0x8 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL9			(0x9 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL10			(0xa << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL11			(0xb << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL12			(0xc << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL13			(0xd << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL14			(0xe << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL15			(0xf << 4)
+#define	LRADC_CTRL4_LRADC0SELECT_MASK				0xf
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL0			(0x0 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL1			(0x1 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL2			(0x2 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL3			(0x3 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL4			(0x4 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL5			(0x5 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL6			(0x6 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL7			(0x7 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL8			(0x8 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL9			(0x9 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL10			(0xa << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL11			(0xb << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL12			(0xc << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL13			(0xd << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL14			(0xe << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL15			(0xf << 0)
+
+#define	LRADC_THRESHOLD_ENABLE					(1 << 24)
+#define	LRADC_THRESHOLD_BATTCHRG_DISABLE			(1 << 23)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_MASK			(0x7 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_OFFSET			20
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL0			(0x0 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL1			(0x1 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL2			(0x2 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL3			(0x3 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL4			(0x4 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL5			(0x5 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL6			(0x6 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL7			(0x7 << 20)
+#define	LRADC_THRESHOLD_SETTING_MASK				(0x3 << 18)
+#define	LRADC_THRESHOLD_SETTING_OFFSET				18
+#define	LRADC_THRESHOLD_SETTING_NO_COMPARE			(0x0 << 18)
+#define	LRADC_THRESHOLD_SETTING_DETECT_LOW			(0x1 << 18)
+#define	LRADC_THRESHOLD_SETTING_DETECT_HIGH			(0x2 << 18)
+#define	LRADC_THRESHOLD_SETTING_RESERVED			(0x3 << 18)
+#define	LRADC_THRESHOLD_VALUE_MASK				0x3ffff
+#define	LRADC_THRESHOLD_VALUE_OFFSET				0
+
+#define	LRADC_VERSION_MAJOR_MASK				(0xff << 24)
+#define	LRADC_VERSION_MAJOR_OFFSET				24
+#define	LRADC_VERSION_MINOR_MASK				(0xff << 16)
+#define	LRADC_VERSION_MINOR_OFFSET				16
+#define	LRADC_VERSION_STEP_MASK					0xffff
+#define	LRADC_VERSION_STEP_OFFSET				0
+
+#endif	/* __MX28_REGS_LRADC_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-ocotp.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-ocotp.h
new file mode 100644
index 000000000..8bfbd19d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-ocotp.h
@@ -0,0 +1,159 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 OCOTP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MX28_REGS_OCOTP_H__
+#define __MX28_REGS_OCOTP_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_ocotp_regs {
+	mxs_reg_32(hw_ocotp_ctrl)	/* 0x0 */
+	mxs_reg_32(hw_ocotp_data)	/* 0x10 */
+	mxs_reg_32(hw_ocotp_cust0)	/* 0x20 */
+	mxs_reg_32(hw_ocotp_cust1)	/* 0x30 */
+	mxs_reg_32(hw_ocotp_cust2)	/* 0x40 */
+	mxs_reg_32(hw_ocotp_cust3)	/* 0x50 */
+	mxs_reg_32(hw_ocotp_crypto0)	/* 0x60 */
+	mxs_reg_32(hw_ocotp_crypto1)	/* 0x70 */
+	mxs_reg_32(hw_ocotp_crypto2)	/* 0x80 */
+	mxs_reg_32(hw_ocotp_crypto3)	/* 0x90 */
+	mxs_reg_32(hw_ocotp_hwcap0)	/* 0xa0 */
+	mxs_reg_32(hw_ocotp_hwcap1)	/* 0xb0 */
+	mxs_reg_32(hw_ocotp_hwcap2)	/* 0xc0 */
+	mxs_reg_32(hw_ocotp_hwcap3)	/* 0xd0 */
+	mxs_reg_32(hw_ocotp_hwcap4)	/* 0xe0 */
+	mxs_reg_32(hw_ocotp_hwcap5)	/* 0xf0 */
+	mxs_reg_32(hw_ocotp_swcap)	/* 0x100 */
+	mxs_reg_32(hw_ocotp_custcap)	/* 0x110 */
+	mxs_reg_32(hw_ocotp_lock)	/* 0x120 */
+	mxs_reg_32(hw_ocotp_ops0)	/* 0x130 */
+	mxs_reg_32(hw_ocotp_ops1)	/* 0x140 */
+	mxs_reg_32(hw_ocotp_ops2)	/* 0x150 */
+	mxs_reg_32(hw_ocotp_ops3)	/* 0x160 */
+	mxs_reg_32(hw_ocotp_un0)	/* 0x170 */
+	mxs_reg_32(hw_ocotp_un1)	/* 0x180 */
+	mxs_reg_32(hw_ocotp_un2)	/* 0x190 */
+	mxs_reg_32(hw_ocotp_rom0)	/* 0x1a0 */
+	mxs_reg_32(hw_ocotp_rom1)	/* 0x1b0 */
+	mxs_reg_32(hw_ocotp_rom2)	/* 0x1c0 */
+	mxs_reg_32(hw_ocotp_rom3)	/* 0x1d0 */
+	mxs_reg_32(hw_ocotp_rom4)	/* 0x1e0 */
+	mxs_reg_32(hw_ocotp_rom5)	/* 0x1f0 */
+	mxs_reg_32(hw_ocotp_rom6)	/* 0x200 */
+	mxs_reg_32(hw_ocotp_rom7)	/* 0x210 */
+	mxs_reg_32(hw_ocotp_srk0)	/* 0x220 */
+	mxs_reg_32(hw_ocotp_srk1)	/* 0x230 */
+	mxs_reg_32(hw_ocotp_srk2)	/* 0x240 */
+	mxs_reg_32(hw_ocotp_srk3)	/* 0x250 */
+	mxs_reg_32(hw_ocotp_srk4)	/* 0x260 */
+	mxs_reg_32(hw_ocotp_srk5)	/* 0x270 */
+	mxs_reg_32(hw_ocotp_srk6)	/* 0x280 */
+	mxs_reg_32(hw_ocotp_srk7)	/* 0x290 */
+	mxs_reg_32(hw_ocotp_version)	/* 0x2a0 */
+};
+#endif
+
+#define	OCOTP_CTRL_WR_UNLOCK_MASK		(0xffff << 16)
+#define	OCOTP_CTRL_WR_UNLOCK_OFFSET		16
+#define	OCOTP_CTRL_WR_UNLOCK_KEY		(0x3e77 << 16)
+#define	OCOTP_CTRL_RELOAD_SHADOWS		(1 << 13)
+#define	OCOTP_CTRL_RD_BANK_OPEN			(1 << 12)
+#define	OCOTP_CTRL_ERROR			(1 << 9)
+#define	OCOTP_CTRL_BUSY				(1 << 8)
+#define	OCOTP_CTRL_ADDR_MASK			0x3f
+#define	OCOTP_CTRL_ADDR_OFFSET			0
+
+#define	OCOTP_DATA_DATA_MASK			0xffffffff
+#define	OCOTP_DATA_DATA_OFFSET			0
+
+#define	OCOTP_CUST_BITS_MASK			0xffffffff
+#define	OCOTP_CUST_BITS_OFFSET			0
+
+#define	OCOTP_CRYPTO_BITS_MASK			0xffffffff
+#define	OCOTP_CRYPTO_BITS_OFFSET		0
+
+#define	OCOTP_HWCAP_BITS_MASK			0xffffffff
+#define	OCOTP_HWCAP_BITS_OFFSET			0
+
+#define	OCOTP_SWCAP_BITS_MASK			0xffffffff
+#define	OCOTP_SWCAP_BITS_OFFSET			0
+
+#define	OCOTP_CUSTCAP_RTC_XTAL_32768_PRESENT	(1 << 2)
+#define	OCOTP_CUSTCAP_RTC_XTAL_32000_PRESENT	(1 << 1)
+
+#define	OCOTP_LOCK_ROM7				(1 << 31)
+#define	OCOTP_LOCK_ROM6				(1 << 30)
+#define	OCOTP_LOCK_ROM5				(1 << 29)
+#define	OCOTP_LOCK_ROM4				(1 << 28)
+#define	OCOTP_LOCK_ROM3				(1 << 27)
+#define	OCOTP_LOCK_ROM2				(1 << 26)
+#define	OCOTP_LOCK_ROM1				(1 << 25)
+#define	OCOTP_LOCK_ROM0				(1 << 24)
+#define	OCOTP_LOCK_HWSW_SHADOW_ALT		(1 << 23)
+#define	OCOTP_LOCK_CRYPTODCP_ALT		(1 << 22)
+#define	OCOTP_LOCK_CRYPTOKEY_ALT		(1 << 21)
+#define	OCOTP_LOCK_PIN				(1 << 20)
+#define	OCOTP_LOCK_OPS				(1 << 19)
+#define	OCOTP_LOCK_UN2				(1 << 18)
+#define	OCOTP_LOCK_UN1				(1 << 17)
+#define	OCOTP_LOCK_UN0				(1 << 16)
+#define	OCOTP_LOCK_SRK				(1 << 15)
+#define	OCOTP_LOCK_UNALLOCATED_MASK		(0x7 << 12)
+#define	OCOTP_LOCK_UNALLOCATED_OFFSET		12
+#define	OCOTP_LOCK_SRK_SHADOW			(1 << 11)
+#define	OCOTP_LOCK_ROM_SHADOW			(1 << 10)
+#define	OCOTP_LOCK_CUSTCAP			(1 << 9)
+#define	OCOTP_LOCK_HWSW				(1 << 8)
+#define	OCOTP_LOCK_CUSTCAP_SHADOW		(1 << 7)
+#define	OCOTP_LOCK_HWSW_SHADOW			(1 << 6)
+#define	OCOTP_LOCK_CRYPTODCP			(1 << 5)
+#define	OCOTP_LOCK_CRYPTOKEY			(1 << 4)
+#define	OCOTP_LOCK_CUST3			(1 << 3)
+#define	OCOTP_LOCK_CUST2			(1 << 2)
+#define	OCOTP_LOCK_CUST1			(1 << 1)
+#define	OCOTP_LOCK_CUST0			(1 << 0)
+
+#define	OCOTP_OPS_BITS_MASK			0xffffffff
+#define	OCOTP_OPS_BITS_OFFSET			0
+
+#define	OCOTP_UN_BITS_MASK			0xffffffff
+#define	OCOTP_UN_BITS_OFFSET			0
+
+#define	OCOTP_ROM_BOOT_MODE_MASK		(0xff << 24)
+#define	OCOTP_ROM_BOOT_MODE_OFFSET		24
+#define	OCOTP_ROM_SD_MMC_MODE_MASK		(0x3 << 22)
+#define	OCOTP_ROM_SD_MMC_MODE_OFFSET		22
+#define	OCOTP_ROM_SD_POWER_GATE_GPIO_MASK	(0x3 << 20)
+#define	OCOTP_ROM_SD_POWER_GATE_GPIO_OFFSET	20
+#define	OCOTP_ROM_SD_POWER_UP_DELAY_MASK	(0x3f << 14)
+#define	OCOTP_ROM_SD_POWER_UP_DELAY_OFFSET	14
+#define	OCOTP_ROM_SD_BUS_WIDTH_MASK		(0x3 << 12)
+#define	OCOTP_ROM_SD_BUS_WIDTH_OFFSET		12
+#define	OCOTP_ROM_SSP_SCK_INDEX_MASK		(0xf << 8)
+#define	OCOTP_ROM_SSP_SCK_INDEX_OFFSET		8
+#define	OCOTP_ROM_EMMC_USE_DDR			(1 << 7)
+#define	OCOTP_ROM_DISABLE_SPI_NOR_FAST_READ	(1 << 6)
+#define	OCOTP_ROM_ENABLE_USB_BOOT_SERIAL_NUM	(1 << 5)
+#define	OCOTP_ROM_ENABLE_UNENCRYPTED_BOOT	(1 << 4)
+#define	OCOTP_ROM_SD_MBR_BOOT			(1 << 3)
+
+#define	OCOTP_SRK_BITS_MASK			0xffffffff
+#define	OCOTP_SRK_BITS_OFFSET			0
+
+#define	OCOTP_VERSION_MAJOR_MASK		(0xff << 24)
+#define	OCOTP_VERSION_MAJOR_OFFSET		24
+#define	OCOTP_VERSION_MINOR_MASK		(0xff << 16)
+#define	OCOTP_VERSION_MINOR_OFFSET		16
+#define	OCOTP_VERSION_STEP_MASK			0xffff
+#define	OCOTP_VERSION_STEP_OFFSET		0
+
+#endif /* __MX28_REGS_OCOTP_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-pinctrl.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-pinctrl.h
new file mode 100644
index 000000000..134d436ee
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-pinctrl.h
@@ -0,0 +1,1270 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 PINCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MX28_REGS_PINCTRL_H__
+#define __MX28_REGS_PINCTRL_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_pinctrl_regs {
+	mxs_reg_32(hw_pinctrl_ctrl)		/* 0x0 */
+
+	uint32_t	reserved1[60];
+
+	mxs_reg_32(hw_pinctrl_muxsel0)		/* 0x100 */
+	mxs_reg_32(hw_pinctrl_muxsel1)		/* 0x110 */
+	mxs_reg_32(hw_pinctrl_muxsel2)		/* 0x120 */
+	mxs_reg_32(hw_pinctrl_muxsel3)		/* 0x130 */
+	mxs_reg_32(hw_pinctrl_muxsel4)		/* 0x140 */
+	mxs_reg_32(hw_pinctrl_muxsel5)		/* 0x150 */
+	mxs_reg_32(hw_pinctrl_muxsel6)		/* 0x160 */
+	mxs_reg_32(hw_pinctrl_muxsel7)		/* 0x170 */
+	mxs_reg_32(hw_pinctrl_muxsel8)		/* 0x180 */
+	mxs_reg_32(hw_pinctrl_muxsel9)		/* 0x190 */
+	mxs_reg_32(hw_pinctrl_muxsel10)	/* 0x1a0 */
+	mxs_reg_32(hw_pinctrl_muxsel11)	/* 0x1b0 */
+	mxs_reg_32(hw_pinctrl_muxsel12)	/* 0x1c0 */
+	mxs_reg_32(hw_pinctrl_muxsel13)	/* 0x1d0 */
+
+	uint32_t	reserved2[72];
+
+	mxs_reg_32(hw_pinctrl_drive0)		/* 0x300 */
+	mxs_reg_32(hw_pinctrl_drive1)		/* 0x310 */
+	mxs_reg_32(hw_pinctrl_drive2)		/* 0x320 */
+	mxs_reg_32(hw_pinctrl_drive3)		/* 0x330 */
+	mxs_reg_32(hw_pinctrl_drive4)		/* 0x340 */
+	mxs_reg_32(hw_pinctrl_drive5)		/* 0x350 */
+	mxs_reg_32(hw_pinctrl_drive6)		/* 0x360 */
+	mxs_reg_32(hw_pinctrl_drive7)		/* 0x370 */
+	mxs_reg_32(hw_pinctrl_drive8)		/* 0x380 */
+	mxs_reg_32(hw_pinctrl_drive9)		/* 0x390 */
+	mxs_reg_32(hw_pinctrl_drive10)		/* 0x3a0 */
+	mxs_reg_32(hw_pinctrl_drive11)		/* 0x3b0 */
+	mxs_reg_32(hw_pinctrl_drive12)		/* 0x3c0 */
+	mxs_reg_32(hw_pinctrl_drive13)		/* 0x3d0 */
+	mxs_reg_32(hw_pinctrl_drive14)		/* 0x3e0 */
+	mxs_reg_32(hw_pinctrl_drive15)		/* 0x3f0 */
+	mxs_reg_32(hw_pinctrl_drive16)		/* 0x400 */
+	mxs_reg_32(hw_pinctrl_drive17)		/* 0x410 */
+	mxs_reg_32(hw_pinctrl_drive18)		/* 0x420 */
+	mxs_reg_32(hw_pinctrl_drive19)		/* 0x430 */
+
+	uint32_t	reserved3[112];
+
+	mxs_reg_32(hw_pinctrl_pull0)		/* 0x600 */
+	mxs_reg_32(hw_pinctrl_pull1)		/* 0x610 */
+	mxs_reg_32(hw_pinctrl_pull2)		/* 0x620 */
+	mxs_reg_32(hw_pinctrl_pull3)		/* 0x630 */
+	mxs_reg_32(hw_pinctrl_pull4)		/* 0x640 */
+	mxs_reg_32(hw_pinctrl_pull5)		/* 0x650 */
+	mxs_reg_32(hw_pinctrl_pull6)		/* 0x660 */
+
+	uint32_t	reserved4[36];
+
+	mxs_reg_32(hw_pinctrl_dout0)		/* 0x700 */
+	mxs_reg_32(hw_pinctrl_dout1)		/* 0x710 */
+	mxs_reg_32(hw_pinctrl_dout2)		/* 0x720 */
+	mxs_reg_32(hw_pinctrl_dout3)		/* 0x730 */
+	mxs_reg_32(hw_pinctrl_dout4)		/* 0x740 */
+
+	uint32_t	reserved5[108];
+
+	mxs_reg_32(hw_pinctrl_din0)		/* 0x900 */
+	mxs_reg_32(hw_pinctrl_din1)		/* 0x910 */
+	mxs_reg_32(hw_pinctrl_din2)		/* 0x920 */
+	mxs_reg_32(hw_pinctrl_din3)		/* 0x930 */
+	mxs_reg_32(hw_pinctrl_din4)		/* 0x940 */
+
+	uint32_t	reserved6[108];
+
+	mxs_reg_32(hw_pinctrl_doe0)		/* 0xb00 */
+	mxs_reg_32(hw_pinctrl_doe1)		/* 0xb10 */
+	mxs_reg_32(hw_pinctrl_doe2)		/* 0xb20 */
+	mxs_reg_32(hw_pinctrl_doe3)		/* 0xb30 */
+	mxs_reg_32(hw_pinctrl_doe4)		/* 0xb40 */
+
+	uint32_t	reserved7[300];
+
+	mxs_reg_32(hw_pinctrl_pin2irq0)	/* 0x1000 */
+	mxs_reg_32(hw_pinctrl_pin2irq1)	/* 0x1010 */
+	mxs_reg_32(hw_pinctrl_pin2irq2)	/* 0x1020 */
+	mxs_reg_32(hw_pinctrl_pin2irq3)	/* 0x1030 */
+	mxs_reg_32(hw_pinctrl_pin2irq4)	/* 0x1040 */
+
+	uint32_t	reserved8[44];
+
+	mxs_reg_32(hw_pinctrl_irqen0)		/* 0x1100 */
+	mxs_reg_32(hw_pinctrl_irqen1)		/* 0x1110 */
+	mxs_reg_32(hw_pinctrl_irqen2)		/* 0x1120 */
+	mxs_reg_32(hw_pinctrl_irqen3)		/* 0x1130 */
+	mxs_reg_32(hw_pinctrl_irqen4)		/* 0x1140 */
+
+	uint32_t	reserved9[44];
+
+	mxs_reg_32(hw_pinctrl_irqlevel0)	/* 0x1200 */
+	mxs_reg_32(hw_pinctrl_irqlevel1)	/* 0x1210 */
+	mxs_reg_32(hw_pinctrl_irqlevel2)	/* 0x1220 */
+	mxs_reg_32(hw_pinctrl_irqlevel3)	/* 0x1230 */
+	mxs_reg_32(hw_pinctrl_irqlevel4)	/* 0x1240 */
+
+	uint32_t	reserved10[44];
+
+	mxs_reg_32(hw_pinctrl_irqpol0)		/* 0x1300 */
+	mxs_reg_32(hw_pinctrl_irqpol1)		/* 0x1310 */
+	mxs_reg_32(hw_pinctrl_irqpol2)		/* 0x1320 */
+	mxs_reg_32(hw_pinctrl_irqpol3)		/* 0x1330 */
+	mxs_reg_32(hw_pinctrl_irqpol4)		/* 0x1340 */
+
+	uint32_t	reserved11[44];
+
+	mxs_reg_32(hw_pinctrl_irqstat0)	/* 0x1400 */
+	mxs_reg_32(hw_pinctrl_irqstat1)	/* 0x1410 */
+	mxs_reg_32(hw_pinctrl_irqstat2)	/* 0x1420 */
+	mxs_reg_32(hw_pinctrl_irqstat3)	/* 0x1430 */
+	mxs_reg_32(hw_pinctrl_irqstat4)	/* 0x1440 */
+
+	uint32_t	reserved12[380];
+
+	mxs_reg_32(hw_pinctrl_emi_odt_ctrl)	/* 0x1a40 */
+
+	uint32_t	reserved13[76];
+
+	mxs_reg_32(hw_pinctrl_emi_ds_ctrl)	/* 0x1b80 */
+};
+#endif
+
+#define	PINCTRL_CTRL_SFTRST				(1 << 31)
+#define	PINCTRL_CTRL_CLKGATE				(1 << 30)
+#define	PINCTRL_CTRL_PRESENT4				(1 << 24)
+#define	PINCTRL_CTRL_PRESENT3				(1 << 23)
+#define	PINCTRL_CTRL_PRESENT2				(1 << 22)
+#define	PINCTRL_CTRL_PRESENT1				(1 << 21)
+#define	PINCTRL_CTRL_PRESENT0				(1 << 20)
+#define	PINCTRL_CTRL_IRQOUT4				(1 << 4)
+#define	PINCTRL_CTRL_IRQOUT3				(1 << 3)
+#define	PINCTRL_CTRL_IRQOUT2				(1 << 2)
+#define	PINCTRL_CTRL_IRQOUT1				(1 << 1)
+#define	PINCTRL_CTRL_IRQOUT0				(1 << 0)
+
+#define	PINCTRL_MUXSEL0_BANK0_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL0_BANK0_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL0_BANK0_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL0_BANK0_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL0_BANK0_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL0_BANK0_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL0_BANK0_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL0_BANK0_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL0_BANK0_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL0_BANK0_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL0_BANK0_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL0_BANK0_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL0_BANK0_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL0_BANK0_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL0_BANK0_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL0_BANK0_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL1_BANK0_PIN28_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL1_BANK0_PIN28_OFFSET		24
+#define	PINCTRL_MUXSEL1_BANK0_PIN27_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL1_BANK0_PIN27_OFFSET		22
+#define	PINCTRL_MUXSEL1_BANK0_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL1_BANK0_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL1_BANK0_PIN25_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL1_BANK0_PIN25_OFFSET		18
+#define	PINCTRL_MUXSEL1_BANK0_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL1_BANK0_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL1_BANK0_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL1_BANK0_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL1_BANK0_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL1_BANK0_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL1_BANK0_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL1_BANK0_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL1_BANK0_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL1_BANK0_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL1_BANK0_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL1_BANK0_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL1_BANK0_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL1_BANK0_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL1_BANK0_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL1_BANK0_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL1_BANK0_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL1_BANK0_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL2_BANK1_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL2_BANK1_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL2_BANK1_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL2_BANK1_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL2_BANK1_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL2_BANK1_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL2_BANK1_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL2_BANK1_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL2_BANK1_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL2_BANK1_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL2_BANK1_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL2_BANK1_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL2_BANK1_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL2_BANK1_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL2_BANK1_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL2_BANK1_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL2_BANK1_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL2_BANK1_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL2_BANK1_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL2_BANK1_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL2_BANK1_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL2_BANK1_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL2_BANK1_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL2_BANK1_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL2_BANK1_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL2_BANK1_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL2_BANK1_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL2_BANK1_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL2_BANK1_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL2_BANK1_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL2_BANK1_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL2_BANK1_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL3_BANK1_PIN31_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL3_BANK1_PIN31_OFFSET		30
+#define	PINCTRL_MUXSEL3_BANK1_PIN30_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL3_BANK1_PIN30_OFFSET		28
+#define	PINCTRL_MUXSEL3_BANK1_PIN29_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL3_BANK1_PIN29_OFFSET		26
+#define	PINCTRL_MUXSEL3_BANK1_PIN28_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL3_BANK1_PIN28_OFFSET		24
+#define	PINCTRL_MUXSEL3_BANK1_PIN27_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL3_BANK1_PIN27_OFFSET		22
+#define	PINCTRL_MUXSEL3_BANK1_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL3_BANK1_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL3_BANK1_PIN25_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL3_BANK1_PIN25_OFFSET		18
+#define	PINCTRL_MUXSEL3_BANK1_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL3_BANK1_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL3_BANK1_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL3_BANK1_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL3_BANK1_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL3_BANK1_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL3_BANK1_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL3_BANK1_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL3_BANK1_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL3_BANK1_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL3_BANK1_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL3_BANK1_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL3_BANK1_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL3_BANK1_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL3_BANK1_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL3_BANK1_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL3_BANK1_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL3_BANK1_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL4_BANK2_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL4_BANK2_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL4_BANK2_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL4_BANK2_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL4_BANK2_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL4_BANK2_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL4_BANK2_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL4_BANK2_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL4_BANK2_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL4_BANK2_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL4_BANK2_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL4_BANK2_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL4_BANK2_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL4_BANK2_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL4_BANK2_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL4_BANK2_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL4_BANK2_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL4_BANK2_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL4_BANK2_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL4_BANK2_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL4_BANK2_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL4_BANK2_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL4_BANK2_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL4_BANK2_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL4_BANK2_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL4_BANK2_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL4_BANK2_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL4_BANK2_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL4_BANK2_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL4_BANK2_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL5_BANK2_PIN27_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL5_BANK2_PIN27_OFFSET		22
+#define	PINCTRL_MUXSEL5_BANK2_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL5_BANK2_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL5_BANK2_PIN25_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL5_BANK2_PIN25_OFFSET		18
+#define	PINCTRL_MUXSEL5_BANK2_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL5_BANK2_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL5_BANK2_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL5_BANK2_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL5_BANK2_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL5_BANK2_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL5_BANK2_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL5_BANK2_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL5_BANK2_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL5_BANK2_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL5_BANK2_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL5_BANK2_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL5_BANK2_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL5_BANK2_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL6_BANK3_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL6_BANK3_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL6_BANK3_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL6_BANK3_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL6_BANK3_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL6_BANK3_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL6_BANK3_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL6_BANK3_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL6_BANK3_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL6_BANK3_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL6_BANK3_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL6_BANK3_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL6_BANK3_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL6_BANK3_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL6_BANK3_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL6_BANK3_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL6_BANK3_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL6_BANK3_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL6_BANK3_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL6_BANK3_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL6_BANK3_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL6_BANK3_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL6_BANK3_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL6_BANK3_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL6_BANK3_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL6_BANK3_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL6_BANK3_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL6_BANK3_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL6_BANK3_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL6_BANK3_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL6_BANK3_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL6_BANK3_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL7_BANK3_PIN30_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL7_BANK3_PIN30_OFFSET		28
+#define	PINCTRL_MUXSEL7_BANK3_PIN29_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL7_BANK3_PIN29_OFFSET		26
+#define	PINCTRL_MUXSEL7_BANK3_PIN28_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL7_BANK3_PIN28_OFFSET		24
+#define	PINCTRL_MUXSEL7_BANK3_PIN27_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL7_BANK3_PIN27_OFFSET		22
+#define	PINCTRL_MUXSEL7_BANK3_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL7_BANK3_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL7_BANK3_PIN25_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL7_BANK3_PIN25_OFFSET		18
+#define	PINCTRL_MUXSEL7_BANK3_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL7_BANK3_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL7_BANK3_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL7_BANK3_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL7_BANK3_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL7_BANK3_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL7_BANK3_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL7_BANK3_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL7_BANK3_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL7_BANK3_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL7_BANK3_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL7_BANK3_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL7_BANK3_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL7_BANK3_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL7_BANK3_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL7_BANK3_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL8_BANK4_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL8_BANK4_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL8_BANK4_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL8_BANK4_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL8_BANK4_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL8_BANK4_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL8_BANK4_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL8_BANK4_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL8_BANK4_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL8_BANK4_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL8_BANK4_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL8_BANK4_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL8_BANK4_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL8_BANK4_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL8_BANK4_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL8_BANK4_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL8_BANK4_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL8_BANK4_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL8_BANK4_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL8_BANK4_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL8_BANK4_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL8_BANK4_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL8_BANK4_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL8_BANK4_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL8_BANK4_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL8_BANK4_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL8_BANK4_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL8_BANK4_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL8_BANK4_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL8_BANK4_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL8_BANK4_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL8_BANK4_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL9_BANK4_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL9_BANK4_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL9_BANK4_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL9_BANK4_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL10_BANK5_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL10_BANK5_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL10_BANK5_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL10_BANK5_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL10_BANK5_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL10_BANK5_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL10_BANK5_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL10_BANK5_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL10_BANK5_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL10_BANK5_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL10_BANK5_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL10_BANK5_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL10_BANK5_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL10_BANK5_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL10_BANK5_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL10_BANK5_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL10_BANK5_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL10_BANK5_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL10_BANK5_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL10_BANK5_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL10_BANK5_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL10_BANK5_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL10_BANK5_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL10_BANK5_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL10_BANK5_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL10_BANK5_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL10_BANK5_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL10_BANK5_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL10_BANK5_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL10_BANK5_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL10_BANK5_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL10_BANK5_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL11_BANK5_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL11_BANK5_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL11_BANK5_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL11_BANK5_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL11_BANK5_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL11_BANK5_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL11_BANK5_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL11_BANK5_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL11_BANK5_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL11_BANK5_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL11_BANK5_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL11_BANK5_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL11_BANK5_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL11_BANK5_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL11_BANK5_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL11_BANK5_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL11_BANK5_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL11_BANK5_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL12_BANK6_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL12_BANK6_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL12_BANK6_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL12_BANK6_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL12_BANK6_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL12_BANK6_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL12_BANK6_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL12_BANK6_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL12_BANK6_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL12_BANK6_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL12_BANK6_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL12_BANK6_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL12_BANK6_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL12_BANK6_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL12_BANK6_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL12_BANK6_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL12_BANK6_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL12_BANK6_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL12_BANK6_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL12_BANK6_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL12_BANK6_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL12_BANK6_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL12_BANK6_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL12_BANK6_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL12_BANK6_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL12_BANK6_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL12_BANK6_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL12_BANK6_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL12_BANK6_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL12_BANK6_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL13_BANK6_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL13_BANK6_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL13_BANK6_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL13_BANK6_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL13_BANK6_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL13_BANK6_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL13_BANK6_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL13_BANK6_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL13_BANK6_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL13_BANK6_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL13_BANK6_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL13_BANK6_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL13_BANK6_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL13_BANK6_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL13_BANK6_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL13_BANK6_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL13_BANK6_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL13_BANK6_PIN16_OFFSET		0
+
+#define	PINCTRL_DRIVE0_BANK0_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE0_BANK0_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE0_BANK0_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE0_BANK0_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE0_BANK0_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE0_BANK0_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE0_BANK0_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE0_BANK0_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE0_BANK0_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE0_BANK0_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE0_BANK0_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE0_BANK0_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE0_BANK0_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE0_BANK0_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE0_BANK0_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE0_BANK0_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE0_BANK0_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE0_BANK0_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE0_BANK0_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE0_BANK0_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE0_BANK0_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE0_BANK0_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE0_BANK0_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE0_BANK0_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE2_BANK0_PIN23_V			(1 << 30)
+#define	PINCTRL_DRIVE2_BANK0_PIN23_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE2_BANK0_PIN23_MA_OFFSET		28
+#define	PINCTRL_DRIVE2_BANK0_PIN22_V			(1 << 26)
+#define	PINCTRL_DRIVE2_BANK0_PIN22_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE2_BANK0_PIN22_MA_OFFSET		24
+#define	PINCTRL_DRIVE2_BANK0_PIN21_V			(1 << 22)
+#define	PINCTRL_DRIVE2_BANK0_PIN21_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE2_BANK0_PIN21_MA_OFFSET		20
+#define	PINCTRL_DRIVE2_BANK0_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE2_BANK0_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE2_BANK0_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE2_BANK0_PIN19_V			(1 << 14)
+#define	PINCTRL_DRIVE2_BANK0_PIN19_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE2_BANK0_PIN19_MA_OFFSET		12
+#define	PINCTRL_DRIVE2_BANK0_PIN18_V			(1 << 10)
+#define	PINCTRL_DRIVE2_BANK0_PIN18_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE2_BANK0_PIN18_MA_OFFSET		8
+#define	PINCTRL_DRIVE2_BANK0_PIN17_V			(1 << 6)
+#define	PINCTRL_DRIVE2_BANK0_PIN17_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE2_BANK0_PIN17_MA_OFFSET		4
+#define	PINCTRL_DRIVE2_BANK0_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE2_BANK0_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE2_BANK0_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE3_BANK0_PIN28_V			(1 << 18)
+#define	PINCTRL_DRIVE3_BANK0_PIN28_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE3_BANK0_PIN28_MA_OFFSET		16
+#define	PINCTRL_DRIVE3_BANK0_PIN27_V			(1 << 14)
+#define	PINCTRL_DRIVE3_BANK0_PIN27_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE3_BANK0_PIN27_MA_OFFSET		12
+#define	PINCTRL_DRIVE3_BANK0_PIN26_V			(1 << 10)
+#define	PINCTRL_DRIVE3_BANK0_PIN26_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE3_BANK0_PIN26_MA_OFFSET		8
+#define	PINCTRL_DRIVE3_BANK0_PIN25_V			(1 << 6)
+#define	PINCTRL_DRIVE3_BANK0_PIN25_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE3_BANK0_PIN25_MA_OFFSET		4
+#define	PINCTRL_DRIVE3_BANK0_PIN24_V			(1 << 2)
+#define	PINCTRL_DRIVE3_BANK0_PIN24_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE3_BANK0_PIN24_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE4_BANK1_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE4_BANK1_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE4_BANK1_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE4_BANK1_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE4_BANK1_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE4_BANK1_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE4_BANK1_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE4_BANK1_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE4_BANK1_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE4_BANK1_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE4_BANK1_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE4_BANK1_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE4_BANK1_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE4_BANK1_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE4_BANK1_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE4_BANK1_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE4_BANK1_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE4_BANK1_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE4_BANK1_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE4_BANK1_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE4_BANK1_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE4_BANK1_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE4_BANK1_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE4_BANK1_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE5_BANK1_PIN15_V			(1 << 30)
+#define	PINCTRL_DRIVE5_BANK1_PIN15_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE5_BANK1_PIN15_MA_OFFSET		28
+#define	PINCTRL_DRIVE5_BANK1_PIN14_V			(1 << 26)
+#define	PINCTRL_DRIVE5_BANK1_PIN14_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE5_BANK1_PIN14_MA_OFFSET		24
+#define	PINCTRL_DRIVE5_BANK1_PIN13_V			(1 << 22)
+#define	PINCTRL_DRIVE5_BANK1_PIN13_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE5_BANK1_PIN13_MA_OFFSET		20
+#define	PINCTRL_DRIVE5_BANK1_PIN12_V			(1 << 18)
+#define	PINCTRL_DRIVE5_BANK1_PIN12_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE5_BANK1_PIN12_MA_OFFSET		16
+#define	PINCTRL_DRIVE5_BANK1_PIN11_V			(1 << 14)
+#define	PINCTRL_DRIVE5_BANK1_PIN11_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE5_BANK1_PIN11_MA_OFFSET		12
+#define	PINCTRL_DRIVE5_BANK1_PIN10_V			(1 << 10)
+#define	PINCTRL_DRIVE5_BANK1_PIN10_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE5_BANK1_PIN10_MA_OFFSET		8
+#define	PINCTRL_DRIVE5_BANK1_PIN09_V			(1 << 6)
+#define	PINCTRL_DRIVE5_BANK1_PIN09_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE5_BANK1_PIN09_MA_OFFSET		4
+#define	PINCTRL_DRIVE5_BANK1_PIN08_V			(1 << 2)
+#define	PINCTRL_DRIVE5_BANK1_PIN08_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE5_BANK1_PIN08_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE6_BANK1_PIN23_V			(1 << 30)
+#define	PINCTRL_DRIVE6_BANK1_PIN23_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE6_BANK1_PIN23_MA_OFFSET		28
+#define	PINCTRL_DRIVE6_BANK1_PIN22_V			(1 << 26)
+#define	PINCTRL_DRIVE6_BANK1_PIN22_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE6_BANK1_PIN22_MA_OFFSET		24
+#define	PINCTRL_DRIVE6_BANK1_PIN21_V			(1 << 22)
+#define	PINCTRL_DRIVE6_BANK1_PIN21_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE6_BANK1_PIN21_MA_OFFSET		20
+#define	PINCTRL_DRIVE6_BANK1_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE6_BANK1_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE6_BANK1_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE6_BANK1_PIN19_V			(1 << 14)
+#define	PINCTRL_DRIVE6_BANK1_PIN19_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE6_BANK1_PIN19_MA_OFFSET		12
+#define	PINCTRL_DRIVE6_BANK1_PIN18_V			(1 << 10)
+#define	PINCTRL_DRIVE6_BANK1_PIN18_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE6_BANK1_PIN18_MA_OFFSET		8
+#define	PINCTRL_DRIVE6_BANK1_PIN17_V			(1 << 6)
+#define	PINCTRL_DRIVE6_BANK1_PIN17_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE6_BANK1_PIN17_MA_OFFSET		4
+#define	PINCTRL_DRIVE6_BANK1_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE6_BANK1_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE6_BANK1_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE7_BANK1_PIN31_V			(1 << 30)
+#define	PINCTRL_DRIVE7_BANK1_PIN31_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE7_BANK1_PIN31_MA_OFFSET		28
+#define	PINCTRL_DRIVE7_BANK1_PIN30_V			(1 << 26)
+#define	PINCTRL_DRIVE7_BANK1_PIN30_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE7_BANK1_PIN30_MA_OFFSET		24
+#define	PINCTRL_DRIVE7_BANK1_PIN29_V			(1 << 22)
+#define	PINCTRL_DRIVE7_BANK1_PIN29_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE7_BANK1_PIN29_MA_OFFSET		20
+#define	PINCTRL_DRIVE7_BANK1_PIN28_V			(1 << 18)
+#define	PINCTRL_DRIVE7_BANK1_PIN28_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE7_BANK1_PIN28_MA_OFFSET		16
+#define	PINCTRL_DRIVE7_BANK1_PIN27_V			(1 << 14)
+#define	PINCTRL_DRIVE7_BANK1_PIN27_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE7_BANK1_PIN27_MA_OFFSET		12
+#define	PINCTRL_DRIVE7_BANK1_PIN26_V			(1 << 10)
+#define	PINCTRL_DRIVE7_BANK1_PIN26_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE7_BANK1_PIN26_MA_OFFSET		8
+#define	PINCTRL_DRIVE7_BANK1_PIN25_V			(1 << 6)
+#define	PINCTRL_DRIVE7_BANK1_PIN25_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE7_BANK1_PIN25_MA_OFFSET		4
+#define	PINCTRL_DRIVE7_BANK1_PIN24_V			(1 << 2)
+#define	PINCTRL_DRIVE7_BANK1_PIN24_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE7_BANK1_PIN24_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE8_BANK2_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE8_BANK2_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE8_BANK2_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE8_BANK2_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE8_BANK2_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE8_BANK2_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE8_BANK2_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE8_BANK2_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE8_BANK2_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE8_BANK2_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE8_BANK2_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE8_BANK2_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE8_BANK2_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE8_BANK2_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE8_BANK2_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE8_BANK2_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE8_BANK2_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE8_BANK2_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE8_BANK2_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE8_BANK2_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE8_BANK2_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE8_BANK2_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE8_BANK2_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE8_BANK2_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE9_BANK2_PIN15_V			(1 << 30)
+#define	PINCTRL_DRIVE9_BANK2_PIN15_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE9_BANK2_PIN15_MA_OFFSET		28
+#define	PINCTRL_DRIVE9_BANK2_PIN14_V			(1 << 26)
+#define	PINCTRL_DRIVE9_BANK2_PIN14_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE9_BANK2_PIN14_MA_OFFSET		24
+#define	PINCTRL_DRIVE9_BANK2_PIN13_V			(1 << 22)
+#define	PINCTRL_DRIVE9_BANK2_PIN13_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE9_BANK2_PIN13_MA_OFFSET		20
+#define	PINCTRL_DRIVE9_BANK2_PIN12_V			(1 << 18)
+#define	PINCTRL_DRIVE9_BANK2_PIN12_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE9_BANK2_PIN12_MA_OFFSET		16
+#define	PINCTRL_DRIVE9_BANK2_PIN10_V			(1 << 10)
+#define	PINCTRL_DRIVE9_BANK2_PIN10_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE9_BANK2_PIN10_MA_OFFSET		8
+#define	PINCTRL_DRIVE9_BANK2_PIN09_V			(1 << 6)
+#define	PINCTRL_DRIVE9_BANK2_PIN09_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE9_BANK2_PIN09_MA_OFFSET		4
+#define	PINCTRL_DRIVE9_BANK2_PIN08_V			(1 << 2)
+#define	PINCTRL_DRIVE9_BANK2_PIN08_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE9_BANK2_PIN08_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE10_BANK2_PIN21_V			(1 << 22)
+#define	PINCTRL_DRIVE10_BANK2_PIN21_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE10_BANK2_PIN21_MA_OFFSET		20
+#define	PINCTRL_DRIVE10_BANK2_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE10_BANK2_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE10_BANK2_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE10_BANK2_PIN19_V			(1 << 14)
+#define	PINCTRL_DRIVE10_BANK2_PIN19_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE10_BANK2_PIN19_MA_OFFSET		12
+#define	PINCTRL_DRIVE10_BANK2_PIN18_V			(1 << 10)
+#define	PINCTRL_DRIVE10_BANK2_PIN18_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE10_BANK2_PIN18_MA_OFFSET		8
+#define	PINCTRL_DRIVE10_BANK2_PIN17_V			(1 << 6)
+#define	PINCTRL_DRIVE10_BANK2_PIN17_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE10_BANK2_PIN17_MA_OFFSET		4
+#define	PINCTRL_DRIVE10_BANK2_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE10_BANK2_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE10_BANK2_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE11_BANK2_PIN27_V			(1 << 14)
+#define	PINCTRL_DRIVE11_BANK2_PIN27_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE11_BANK2_PIN27_MA_OFFSET		12
+#define	PINCTRL_DRIVE11_BANK2_PIN26_V			(1 << 10)
+#define	PINCTRL_DRIVE11_BANK2_PIN26_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE11_BANK2_PIN26_MA_OFFSET		8
+#define	PINCTRL_DRIVE11_BANK2_PIN25_V			(1 << 6)
+#define	PINCTRL_DRIVE11_BANK2_PIN25_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE11_BANK2_PIN25_MA_OFFSET		4
+#define	PINCTRL_DRIVE11_BANK2_PIN24_V			(1 << 2)
+#define	PINCTRL_DRIVE11_BANK2_PIN24_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE11_BANK2_PIN24_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE12_BANK3_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE12_BANK3_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE12_BANK3_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE12_BANK3_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE12_BANK3_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE12_BANK3_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE12_BANK3_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE12_BANK3_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE12_BANK3_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE12_BANK3_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE12_BANK3_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE12_BANK3_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE12_BANK3_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE12_BANK3_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE12_BANK3_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE12_BANK3_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE12_BANK3_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE12_BANK3_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE12_BANK3_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE12_BANK3_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE12_BANK3_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE12_BANK3_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE12_BANK3_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE12_BANK3_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE13_BANK3_PIN15_V			(1 << 30)
+#define	PINCTRL_DRIVE13_BANK3_PIN15_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE13_BANK3_PIN15_MA_OFFSET		28
+#define	PINCTRL_DRIVE13_BANK3_PIN14_V			(1 << 26)
+#define	PINCTRL_DRIVE13_BANK3_PIN14_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE13_BANK3_PIN14_MA_OFFSET		24
+#define	PINCTRL_DRIVE13_BANK3_PIN13_V			(1 << 22)
+#define	PINCTRL_DRIVE13_BANK3_PIN13_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE13_BANK3_PIN13_MA_OFFSET		20
+#define	PINCTRL_DRIVE13_BANK3_PIN12_V			(1 << 18)
+#define	PINCTRL_DRIVE13_BANK3_PIN12_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE13_BANK3_PIN12_MA_OFFSET		16
+#define	PINCTRL_DRIVE13_BANK3_PIN11_V			(1 << 14)
+#define	PINCTRL_DRIVE13_BANK3_PIN11_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE13_BANK3_PIN11_MA_OFFSET		12
+#define	PINCTRL_DRIVE13_BANK3_PIN10_V			(1 << 10)
+#define	PINCTRL_DRIVE13_BANK3_PIN10_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE13_BANK3_PIN10_MA_OFFSET		8
+#define	PINCTRL_DRIVE13_BANK3_PIN09_V			(1 << 6)
+#define	PINCTRL_DRIVE13_BANK3_PIN09_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE13_BANK3_PIN09_MA_OFFSET		4
+#define	PINCTRL_DRIVE13_BANK3_PIN08_V			(1 << 2)
+#define	PINCTRL_DRIVE13_BANK3_PIN08_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE13_BANK3_PIN08_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE14_BANK3_PIN23_V			(1 << 30)
+#define	PINCTRL_DRIVE14_BANK3_PIN23_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE14_BANK3_PIN23_MA_OFFSET		28
+#define	PINCTRL_DRIVE14_BANK3_PIN22_V			(1 << 26)
+#define	PINCTRL_DRIVE14_BANK3_PIN22_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE14_BANK3_PIN22_MA_OFFSET		24
+#define	PINCTRL_DRIVE14_BANK3_PIN21_V			(1 << 22)
+#define	PINCTRL_DRIVE14_BANK3_PIN21_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE14_BANK3_PIN21_MA_OFFSET		20
+#define	PINCTRL_DRIVE14_BANK3_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE14_BANK3_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE14_BANK3_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE14_BANK3_PIN18_V			(1 << 10)
+#define	PINCTRL_DRIVE14_BANK3_PIN18_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE14_BANK3_PIN18_MA_OFFSET		8
+#define	PINCTRL_DRIVE14_BANK3_PIN17_V			(1 << 6)
+#define	PINCTRL_DRIVE14_BANK3_PIN17_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE14_BANK3_PIN17_MA_OFFSET		4
+#define	PINCTRL_DRIVE14_BANK3_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE14_BANK3_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE14_BANK3_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE15_BANK3_PIN30_V			(1 << 26)
+#define	PINCTRL_DRIVE15_BANK3_PIN30_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE15_BANK3_PIN30_MA_OFFSET		24
+#define	PINCTRL_DRIVE15_BANK3_PIN29_V			(1 << 22)
+#define	PINCTRL_DRIVE15_BANK3_PIN29_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE15_BANK3_PIN29_MA_OFFSET		20
+#define	PINCTRL_DRIVE15_BANK3_PIN28_V			(1 << 18)
+#define	PINCTRL_DRIVE15_BANK3_PIN28_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE15_BANK3_PIN28_MA_OFFSET		16
+#define	PINCTRL_DRIVE15_BANK3_PIN27_V			(1 << 14)
+#define	PINCTRL_DRIVE15_BANK3_PIN27_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE15_BANK3_PIN27_MA_OFFSET		12
+#define	PINCTRL_DRIVE15_BANK3_PIN26_V			(1 << 10)
+#define	PINCTRL_DRIVE15_BANK3_PIN26_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE15_BANK3_PIN26_MA_OFFSET		8
+#define	PINCTRL_DRIVE15_BANK3_PIN25_V			(1 << 6)
+#define	PINCTRL_DRIVE15_BANK3_PIN25_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE15_BANK3_PIN25_MA_OFFSET		4
+#define	PINCTRL_DRIVE15_BANK3_PIN24_V			(1 << 2)
+#define	PINCTRL_DRIVE15_BANK3_PIN24_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE15_BANK3_PIN24_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE16_BANK4_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE16_BANK4_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE16_BANK4_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE16_BANK4_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE16_BANK4_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE16_BANK4_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE16_BANK4_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE16_BANK4_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE16_BANK4_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE16_BANK4_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE16_BANK4_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE16_BANK4_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE16_BANK4_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE16_BANK4_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE16_BANK4_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE16_BANK4_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE16_BANK4_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE16_BANK4_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE16_BANK4_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE16_BANK4_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE16_BANK4_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE16_BANK4_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE16_BANK4_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE16_BANK4_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE17_BANK4_PIN15_V			(1 << 30)
+#define	PINCTRL_DRIVE17_BANK4_PIN15_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE17_BANK4_PIN15_MA_OFFSET		28
+#define	PINCTRL_DRIVE17_BANK4_PIN14_V			(1 << 26)
+#define	PINCTRL_DRIVE17_BANK4_PIN14_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE17_BANK4_PIN14_MA_OFFSET		24
+#define	PINCTRL_DRIVE17_BANK4_PIN13_V			(1 << 22)
+#define	PINCTRL_DRIVE17_BANK4_PIN13_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE17_BANK4_PIN13_MA_OFFSET		20
+#define	PINCTRL_DRIVE17_BANK4_PIN12_V			(1 << 18)
+#define	PINCTRL_DRIVE17_BANK4_PIN12_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE17_BANK4_PIN12_MA_OFFSET		16
+#define	PINCTRL_DRIVE17_BANK4_PIN11_V			(1 << 14)
+#define	PINCTRL_DRIVE17_BANK4_PIN11_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE17_BANK4_PIN11_MA_OFFSET		12
+#define	PINCTRL_DRIVE17_BANK4_PIN10_V			(1 << 10)
+#define	PINCTRL_DRIVE17_BANK4_PIN10_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE17_BANK4_PIN10_MA_OFFSET		8
+#define	PINCTRL_DRIVE17_BANK4_PIN09_V			(1 << 6)
+#define	PINCTRL_DRIVE17_BANK4_PIN09_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE17_BANK4_PIN09_MA_OFFSET		4
+#define	PINCTRL_DRIVE17_BANK4_PIN08_V			(1 << 2)
+#define	PINCTRL_DRIVE17_BANK4_PIN08_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE17_BANK4_PIN08_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE18_BANK4_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE18_BANK4_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE18_BANK4_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE18_BANK4_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE18_BANK4_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE18_BANK4_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_PULL0_BANK0_PIN28			(1 << 28)
+#define	PINCTRL_PULL0_BANK0_PIN27			(1 << 27)
+#define	PINCTRL_PULL0_BANK0_PIN26			(1 << 26)
+#define	PINCTRL_PULL0_BANK0_PIN25			(1 << 25)
+#define	PINCTRL_PULL0_BANK0_PIN24			(1 << 24)
+#define	PINCTRL_PULL0_BANK0_PIN23			(1 << 23)
+#define	PINCTRL_PULL0_BANK0_PIN22			(1 << 22)
+#define	PINCTRL_PULL0_BANK0_PIN21			(1 << 21)
+#define	PINCTRL_PULL0_BANK0_PIN20			(1 << 20)
+#define	PINCTRL_PULL0_BANK0_PIN19			(1 << 19)
+#define	PINCTRL_PULL0_BANK0_PIN18			(1 << 18)
+#define	PINCTRL_PULL0_BANK0_PIN17			(1 << 17)
+#define	PINCTRL_PULL0_BANK0_PIN16			(1 << 16)
+#define	PINCTRL_PULL0_BANK0_PIN07			(1 << 7)
+#define	PINCTRL_PULL0_BANK0_PIN06			(1 << 6)
+#define	PINCTRL_PULL0_BANK0_PIN05			(1 << 5)
+#define	PINCTRL_PULL0_BANK0_PIN04			(1 << 4)
+#define	PINCTRL_PULL0_BANK0_PIN03			(1 << 3)
+#define	PINCTRL_PULL0_BANK0_PIN02			(1 << 2)
+#define	PINCTRL_PULL0_BANK0_PIN01			(1 << 1)
+#define	PINCTRL_PULL0_BANK0_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL1_BANK1_PIN31			(1 << 31)
+#define	PINCTRL_PULL1_BANK1_PIN30			(1 << 30)
+#define	PINCTRL_PULL1_BANK1_PIN29			(1 << 29)
+#define	PINCTRL_PULL1_BANK1_PIN28			(1 << 28)
+#define	PINCTRL_PULL1_BANK1_PIN27			(1 << 27)
+#define	PINCTRL_PULL1_BANK1_PIN26			(1 << 26)
+#define	PINCTRL_PULL1_BANK1_PIN25			(1 << 25)
+#define	PINCTRL_PULL1_BANK1_PIN24			(1 << 24)
+#define	PINCTRL_PULL1_BANK1_PIN23			(1 << 23)
+#define	PINCTRL_PULL1_BANK1_PIN22			(1 << 22)
+#define	PINCTRL_PULL1_BANK1_PIN21			(1 << 21)
+#define	PINCTRL_PULL1_BANK1_PIN20			(1 << 20)
+#define	PINCTRL_PULL1_BANK1_PIN19			(1 << 19)
+#define	PINCTRL_PULL1_BANK1_PIN18			(1 << 18)
+#define	PINCTRL_PULL1_BANK1_PIN17			(1 << 17)
+#define	PINCTRL_PULL1_BANK1_PIN16			(1 << 16)
+#define	PINCTRL_PULL1_BANK1_PIN15			(1 << 15)
+#define	PINCTRL_PULL1_BANK1_PIN14			(1 << 14)
+#define	PINCTRL_PULL1_BANK1_PIN13			(1 << 13)
+#define	PINCTRL_PULL1_BANK1_PIN12			(1 << 12)
+#define	PINCTRL_PULL1_BANK1_PIN11			(1 << 11)
+#define	PINCTRL_PULL1_BANK1_PIN10			(1 << 10)
+#define	PINCTRL_PULL1_BANK1_PIN09			(1 << 9)
+#define	PINCTRL_PULL1_BANK1_PIN08			(1 << 8)
+#define	PINCTRL_PULL1_BANK1_PIN07			(1 << 7)
+#define	PINCTRL_PULL1_BANK1_PIN06			(1 << 6)
+#define	PINCTRL_PULL1_BANK1_PIN05			(1 << 5)
+#define	PINCTRL_PULL1_BANK1_PIN04			(1 << 4)
+#define	PINCTRL_PULL1_BANK1_PIN03			(1 << 3)
+#define	PINCTRL_PULL1_BANK1_PIN02			(1 << 2)
+#define	PINCTRL_PULL1_BANK1_PIN01			(1 << 1)
+#define	PINCTRL_PULL1_BANK1_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL2_BANK2_PIN27			(1 << 27)
+#define	PINCTRL_PULL2_BANK2_PIN26			(1 << 26)
+#define	PINCTRL_PULL2_BANK2_PIN25			(1 << 25)
+#define	PINCTRL_PULL2_BANK2_PIN24			(1 << 24)
+#define	PINCTRL_PULL2_BANK2_PIN21			(1 << 21)
+#define	PINCTRL_PULL2_BANK2_PIN20			(1 << 20)
+#define	PINCTRL_PULL2_BANK2_PIN19			(1 << 19)
+#define	PINCTRL_PULL2_BANK2_PIN18			(1 << 18)
+#define	PINCTRL_PULL2_BANK2_PIN17			(1 << 17)
+#define	PINCTRL_PULL2_BANK2_PIN16			(1 << 16)
+#define	PINCTRL_PULL2_BANK2_PIN15			(1 << 15)
+#define	PINCTRL_PULL2_BANK2_PIN14			(1 << 14)
+#define	PINCTRL_PULL2_BANK2_PIN13			(1 << 13)
+#define	PINCTRL_PULL2_BANK2_PIN12			(1 << 12)
+#define	PINCTRL_PULL2_BANK2_PIN10			(1 << 10)
+#define	PINCTRL_PULL2_BANK2_PIN09			(1 << 9)
+#define	PINCTRL_PULL2_BANK2_PIN08			(1 << 8)
+#define	PINCTRL_PULL2_BANK2_PIN07			(1 << 7)
+#define	PINCTRL_PULL2_BANK2_PIN06			(1 << 6)
+#define	PINCTRL_PULL2_BANK2_PIN05			(1 << 5)
+#define	PINCTRL_PULL2_BANK2_PIN04			(1 << 4)
+#define	PINCTRL_PULL2_BANK2_PIN03			(1 << 3)
+#define	PINCTRL_PULL2_BANK2_PIN02			(1 << 2)
+#define	PINCTRL_PULL2_BANK2_PIN01			(1 << 1)
+#define	PINCTRL_PULL2_BANK2_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL3_BANK3_PIN30			(1 << 30)
+#define	PINCTRL_PULL3_BANK3_PIN29			(1 << 29)
+#define	PINCTRL_PULL3_BANK3_PIN28			(1 << 28)
+#define	PINCTRL_PULL3_BANK3_PIN27			(1 << 27)
+#define	PINCTRL_PULL3_BANK3_PIN26			(1 << 26)
+#define	PINCTRL_PULL3_BANK3_PIN25			(1 << 25)
+#define	PINCTRL_PULL3_BANK3_PIN24			(1 << 24)
+#define	PINCTRL_PULL3_BANK3_PIN23			(1 << 23)
+#define	PINCTRL_PULL3_BANK3_PIN22			(1 << 22)
+#define	PINCTRL_PULL3_BANK3_PIN21			(1 << 21)
+#define	PINCTRL_PULL3_BANK3_PIN20			(1 << 20)
+#define	PINCTRL_PULL3_BANK3_PIN18			(1 << 18)
+#define	PINCTRL_PULL3_BANK3_PIN17			(1 << 17)
+#define	PINCTRL_PULL3_BANK3_PIN16			(1 << 16)
+#define	PINCTRL_PULL3_BANK3_PIN15			(1 << 15)
+#define	PINCTRL_PULL3_BANK3_PIN14			(1 << 14)
+#define	PINCTRL_PULL3_BANK3_PIN13			(1 << 13)
+#define	PINCTRL_PULL3_BANK3_PIN12			(1 << 12)
+#define	PINCTRL_PULL3_BANK3_PIN11			(1 << 11)
+#define	PINCTRL_PULL3_BANK3_PIN10			(1 << 10)
+#define	PINCTRL_PULL3_BANK3_PIN09			(1 << 9)
+#define	PINCTRL_PULL3_BANK3_PIN08			(1 << 8)
+#define	PINCTRL_PULL3_BANK3_PIN07			(1 << 7)
+#define	PINCTRL_PULL3_BANK3_PIN06			(1 << 6)
+#define	PINCTRL_PULL3_BANK3_PIN05			(1 << 5)
+#define	PINCTRL_PULL3_BANK3_PIN04			(1 << 4)
+#define	PINCTRL_PULL3_BANK3_PIN03			(1 << 3)
+#define	PINCTRL_PULL3_BANK3_PIN02			(1 << 2)
+#define	PINCTRL_PULL3_BANK3_PIN01			(1 << 1)
+#define	PINCTRL_PULL3_BANK3_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL4_BANK4_PIN20			(1 << 20)
+#define	PINCTRL_PULL4_BANK4_PIN16			(1 << 16)
+#define	PINCTRL_PULL4_BANK4_PIN15			(1 << 15)
+#define	PINCTRL_PULL4_BANK4_PIN14			(1 << 14)
+#define	PINCTRL_PULL4_BANK4_PIN13			(1 << 13)
+#define	PINCTRL_PULL4_BANK4_PIN12			(1 << 12)
+#define	PINCTRL_PULL4_BANK4_PIN11			(1 << 11)
+#define	PINCTRL_PULL4_BANK4_PIN10			(1 << 10)
+#define	PINCTRL_PULL4_BANK4_PIN09			(1 << 9)
+#define	PINCTRL_PULL4_BANK4_PIN08			(1 << 8)
+#define	PINCTRL_PULL4_BANK4_PIN07			(1 << 7)
+#define	PINCTRL_PULL4_BANK4_PIN06			(1 << 6)
+#define	PINCTRL_PULL4_BANK4_PIN05			(1 << 5)
+#define	PINCTRL_PULL4_BANK4_PIN04			(1 << 4)
+#define	PINCTRL_PULL4_BANK4_PIN03			(1 << 3)
+#define	PINCTRL_PULL4_BANK4_PIN02			(1 << 2)
+#define	PINCTRL_PULL4_BANK4_PIN01			(1 << 1)
+#define	PINCTRL_PULL4_BANK4_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL5_BANK5_PIN26			(1 << 26)
+#define	PINCTRL_PULL5_BANK5_PIN23			(1 << 23)
+#define	PINCTRL_PULL5_BANK5_PIN22			(1 << 22)
+#define	PINCTRL_PULL5_BANK5_PIN21			(1 << 21)
+#define	PINCTRL_PULL5_BANK5_PIN20			(1 << 20)
+#define	PINCTRL_PULL5_BANK5_PIN19			(1 << 19)
+#define	PINCTRL_PULL5_BANK5_PIN18			(1 << 18)
+#define	PINCTRL_PULL5_BANK5_PIN17			(1 << 17)
+#define	PINCTRL_PULL5_BANK5_PIN16			(1 << 16)
+#define	PINCTRL_PULL5_BANK5_PIN15			(1 << 15)
+#define	PINCTRL_PULL5_BANK5_PIN14			(1 << 14)
+#define	PINCTRL_PULL5_BANK5_PIN13			(1 << 13)
+#define	PINCTRL_PULL5_BANK5_PIN12			(1 << 12)
+#define	PINCTRL_PULL5_BANK5_PIN11			(1 << 11)
+#define	PINCTRL_PULL5_BANK5_PIN10			(1 << 10)
+#define	PINCTRL_PULL5_BANK5_PIN09			(1 << 9)
+#define	PINCTRL_PULL5_BANK5_PIN08			(1 << 8)
+#define	PINCTRL_PULL5_BANK5_PIN07			(1 << 7)
+#define	PINCTRL_PULL5_BANK5_PIN06			(1 << 6)
+#define	PINCTRL_PULL5_BANK5_PIN05			(1 << 5)
+#define	PINCTRL_PULL5_BANK5_PIN04			(1 << 4)
+#define	PINCTRL_PULL5_BANK5_PIN03			(1 << 3)
+#define	PINCTRL_PULL5_BANK5_PIN02			(1 << 2)
+#define	PINCTRL_PULL5_BANK5_PIN01			(1 << 1)
+#define	PINCTRL_PULL5_BANK5_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL6_BANK6_PIN24			(1 << 24)
+#define	PINCTRL_PULL6_BANK6_PIN23			(1 << 23)
+#define	PINCTRL_PULL6_BANK6_PIN22			(1 << 22)
+#define	PINCTRL_PULL6_BANK6_PIN21			(1 << 21)
+#define	PINCTRL_PULL6_BANK6_PIN20			(1 << 20)
+#define	PINCTRL_PULL6_BANK6_PIN19			(1 << 19)
+#define	PINCTRL_PULL6_BANK6_PIN18			(1 << 18)
+#define	PINCTRL_PULL6_BANK6_PIN17			(1 << 17)
+#define	PINCTRL_PULL6_BANK6_PIN16			(1 << 16)
+#define	PINCTRL_PULL6_BANK6_PIN14			(1 << 14)
+#define	PINCTRL_PULL6_BANK6_PIN13			(1 << 13)
+#define	PINCTRL_PULL6_BANK6_PIN12			(1 << 12)
+#define	PINCTRL_PULL6_BANK6_PIN11			(1 << 11)
+#define	PINCTRL_PULL6_BANK6_PIN10			(1 << 10)
+#define	PINCTRL_PULL6_BANK6_PIN09			(1 << 9)
+#define	PINCTRL_PULL6_BANK6_PIN08			(1 << 8)
+#define	PINCTRL_PULL6_BANK6_PIN07			(1 << 7)
+#define	PINCTRL_PULL6_BANK6_PIN06			(1 << 6)
+#define	PINCTRL_PULL6_BANK6_PIN05			(1 << 5)
+#define	PINCTRL_PULL6_BANK6_PIN04			(1 << 4)
+#define	PINCTRL_PULL6_BANK6_PIN03			(1 << 3)
+#define	PINCTRL_PULL6_BANK6_PIN02			(1 << 2)
+#define	PINCTRL_PULL6_BANK6_PIN01			(1 << 1)
+#define	PINCTRL_PULL6_BANK6_PIN00			(1 << 0)
+
+#define	PINCTRL_DOUT0_DOUT_MASK				0x1fffffff
+#define	PINCTRL_DOUT0_DOUT_OFFSET			0
+
+#define	PINCTRL_DOUT1_DOUT_MASK				0xffffffff
+#define	PINCTRL_DOUT1_DOUT_OFFSET			0
+
+#define	PINCTRL_DOUT2_DOUT_MASK				0xfffffff
+#define	PINCTRL_DOUT2_DOUT_OFFSET			0
+
+#define	PINCTRL_DOUT3_DOUT_MASK				0x7fffffff
+#define	PINCTRL_DOUT3_DOUT_OFFSET			0
+
+#define	PINCTRL_DOUT4_DOUT_MASK				0x1fffff
+#define	PINCTRL_DOUT4_DOUT_OFFSET			0
+
+#define	PINCTRL_DIN0_DIN_MASK				0x1fffffff
+#define	PINCTRL_DIN0_DIN_OFFSET				0
+
+#define	PINCTRL_DIN1_DIN_MASK				0xffffffff
+#define	PINCTRL_DIN1_DIN_OFFSET				0
+
+#define	PINCTRL_DIN2_DIN_MASK				0xfffffff
+#define	PINCTRL_DIN2_DIN_OFFSET				0
+
+#define	PINCTRL_DIN3_DIN_MASK				0x7fffffff
+#define	PINCTRL_DIN3_DIN_OFFSET				0
+
+#define	PINCTRL_DIN4_DIN_MASK				0x1fffff
+#define	PINCTRL_DIN4_DIN_OFFSET				0
+
+#define	PINCTRL_DOE0_DOE_MASK				0x1fffffff
+#define	PINCTRL_DOE0_DOE_OFFSET				0
+
+#define	PINCTRL_DOE1_DOE_MASK				0xffffffff
+#define	PINCTRL_DOE1_DOE_OFFSET				0
+
+#define	PINCTRL_DOE2_DOE_MASK				0xfffffff
+#define	PINCTRL_DOE2_DOE_OFFSET				0
+
+#define	PINCTRL_DOE3_DOE_MASK				0x7fffffff
+#define	PINCTRL_DOE3_DOE_OFFSET				0
+
+#define	PINCTRL_DOE4_DOE_MASK				0x1fffff
+#define	PINCTRL_DOE4_DOE_OFFSET				0
+
+#define	PINCTRL_PIN2IRQ0_PIN2IRQ_MASK			0x1fffffff
+#define	PINCTRL_PIN2IRQ0_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_PIN2IRQ1_PIN2IRQ_MASK			0xffffffff
+#define	PINCTRL_PIN2IRQ1_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_PIN2IRQ2_PIN2IRQ_MASK			0xfffffff
+#define	PINCTRL_PIN2IRQ2_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_PIN2IRQ3_PIN2IRQ_MASK			0x7fffffff
+#define	PINCTRL_PIN2IRQ3_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_PIN2IRQ4_PIN2IRQ_MASK			0x1fffff
+#define	PINCTRL_PIN2IRQ4_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_IRQEN0_IRQEN_MASK			0x1fffffff
+#define	PINCTRL_IRQEN0_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQEN1_IRQEN_MASK			0xffffffff
+#define	PINCTRL_IRQEN1_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQEN2_IRQEN_MASK			0xfffffff
+#define	PINCTRL_IRQEN2_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQEN3_IRQEN_MASK			0x7fffffff
+#define	PINCTRL_IRQEN3_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQEN4_IRQEN_MASK			0x1fffff
+#define	PINCTRL_IRQEN4_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQLEVEL0_IRQLEVEL_MASK			0x1fffffff
+#define	PINCTRL_IRQLEVEL0_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQLEVEL1_IRQLEVEL_MASK			0xffffffff
+#define	PINCTRL_IRQLEVEL1_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQLEVEL2_IRQLEVEL_MASK			0xfffffff
+#define	PINCTRL_IRQLEVEL2_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQLEVEL3_IRQLEVEL_MASK			0x7fffffff
+#define	PINCTRL_IRQLEVEL3_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQLEVEL4_IRQLEVEL_MASK			0x1fffff
+#define	PINCTRL_IRQLEVEL4_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQPOL0_IRQPOL_MASK			0x1fffffff
+#define	PINCTRL_IRQPOL0_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQPOL1_IRQPOL_MASK			0xffffffff
+#define	PINCTRL_IRQPOL1_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQPOL2_IRQPOL_MASK			0xfffffff
+#define	PINCTRL_IRQPOL2_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQPOL3_IRQPOL_MASK			0x7fffffff
+#define	PINCTRL_IRQPOL3_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQPOL4_IRQPOL_MASK			0x1fffff
+#define	PINCTRL_IRQPOL4_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQSTAT0_IRQSTAT_MASK			0x1fffffff
+#define	PINCTRL_IRQSTAT0_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_IRQSTAT1_IRQSTAT_MASK			0xffffffff
+#define	PINCTRL_IRQSTAT1_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_IRQSTAT2_IRQSTAT_MASK			0xfffffff
+#define	PINCTRL_IRQSTAT2_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_IRQSTAT3_IRQSTAT_MASK			0x7fffffff
+#define	PINCTRL_IRQSTAT3_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_IRQSTAT4_IRQSTAT_MASK			0x1fffff
+#define	PINCTRL_IRQSTAT4_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_MASK		(0x3 << 26)
+#define	PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_OFFSET	26
+#define	PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_MASK		(0x3 << 24)
+#define	PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_OFFSET	24
+#define	PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_MASK		(0x3 << 22)
+#define	PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_OFFSET	22
+#define	PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_MASK		(0x3 << 20)
+#define	PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_OFFSET	20
+#define	PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_MASK		(0x3 << 18)
+#define	PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_OFFSET	18
+#define	PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_MASK		(0x3 << 16)
+#define	PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_OFFSET	16
+#define	PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_MASK		(0x3 << 14)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_OFFSET	14
+#define	PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_MASK		(0x3 << 12)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_OFFSET	12
+#define	PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_MASK		(0x3 << 10)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_OFFSET	10
+#define	PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_MASK		(0x3 << 8)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_OFFSET	8
+#define	PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_MASK		(0x3 << 6)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_OFFSET	6
+#define	PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_MASK		(0x3 << 4)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_OFFSET	4
+#define	PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_MASK		(0x3 << 2)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_OFFSET	2
+#define	PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_MASK		(0x3 << 0)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_OFFSET	0
+
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_MASK		(0x3 << 16)
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_OFFSET		16
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_mDDR		(0x0 << 16)
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_GPIO		(0x1 << 16)
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_LVDDR2		(0x2 << 16)
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2		(0x3 << 16)
+#define	PINCTRL_EMI_DS_CTRL_ADDRESS_MA_MASK		(0x3 << 12)
+#define	PINCTRL_EMI_DS_CTRL_ADDRESS_MA_OFFSET		12
+#define	PINCTRL_EMI_DS_CTRL_CONTROL_MA_MASK		(0x3 << 10)
+#define	PINCTRL_EMI_DS_CTRL_CONTROL_MA_OFFSET		10
+#define	PINCTRL_EMI_DS_CTRL_DUALPAD_MA_MASK		(0x3 << 8)
+#define	PINCTRL_EMI_DS_CTRL_DUALPAD_MA_OFFSET		8
+#define	PINCTRL_EMI_DS_CTRL_SLICE3_MA_MASK		(0x3 << 6)
+#define	PINCTRL_EMI_DS_CTRL_SLICE3_MA_OFFSET		6
+#define	PINCTRL_EMI_DS_CTRL_SLICE2_MA_MASK		(0x3 << 4)
+#define	PINCTRL_EMI_DS_CTRL_SLICE2_MA_OFFSET		4
+#define	PINCTRL_EMI_DS_CTRL_SLICE1_MA_MASK		(0x3 << 2)
+#define	PINCTRL_EMI_DS_CTRL_SLICE1_MA_OFFSET		2
+#define	PINCTRL_EMI_DS_CTRL_SLICE0_MA_MASK		(0x3 << 0)
+#define	PINCTRL_EMI_DS_CTRL_SLICE0_MA_OFFSET		0
+
+#endif /* __MX28_REGS_PINCTRL_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-power-mx23.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-power-mx23.h
new file mode 100644
index 000000000..a0dc78102
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-power-mx23.h
@@ -0,0 +1,344 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX23 Power Controller Register Definitions
+ *
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+#ifndef __MX23_REGS_POWER_H__
+#define __MX23_REGS_POWER_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_power_regs {
+	mxs_reg_32(hw_power_ctrl)
+	mxs_reg_32(hw_power_5vctrl)
+	mxs_reg_32(hw_power_minpwr)
+	mxs_reg_32(hw_power_charge)
+	uint32_t	hw_power_vdddctrl;
+	uint32_t	reserved_vddd[3];
+	uint32_t	hw_power_vddactrl;
+	uint32_t	reserved_vdda[3];
+	uint32_t	hw_power_vddioctrl;
+	uint32_t	reserved_vddio[3];
+	uint32_t	hw_power_vddmemctrl;
+	uint32_t	reserved_vddmem[3];
+	uint32_t	hw_power_dcdc4p2;
+	uint32_t	reserved_dcdc4p2[3];
+	uint32_t	hw_power_misc;
+	uint32_t	reserved_misc[3];
+	uint32_t	hw_power_dclimits;
+	uint32_t	reserved_dclimits[3];
+	mxs_reg_32(hw_power_loopctrl)
+	uint32_t	hw_power_sts;
+	uint32_t	reserved_sts[3];
+	mxs_reg_32(hw_power_speed)
+	uint32_t	hw_power_battmonitor;
+	uint32_t	reserved_battmonitor[3];
+
+	uint32_t	reserved1[4];
+
+	mxs_reg_32(hw_power_reset)
+
+	uint32_t	reserved2[4];
+
+	mxs_reg_32(hw_power_special)
+	mxs_reg_32(hw_power_version)
+};
+#endif
+
+#define	POWER_CTRL_CLKGATE				(1 << 30)
+#define	POWER_CTRL_PSWITCH_MID_TRAN			(1 << 27)
+#define	POWER_CTRL_DCDC4P2_BO_IRQ			(1 << 24)
+#define	POWER_CTRL_ENIRQ_DCDC4P2_BO			(1 << 23)
+#define	POWER_CTRL_VDD5V_DROOP_IRQ			(1 << 22)
+#define	POWER_CTRL_ENIRQ_VDD5V_DROOP			(1 << 21)
+#define	POWER_CTRL_PSWITCH_IRQ				(1 << 20)
+#define	POWER_CTRL_PSWITCH_IRQ_SRC			(1 << 19)
+#define	POWER_CTRL_POLARITY_PSWITCH			(1 << 18)
+#define	POWER_CTRL_ENIRQ_PSWITCH			(1 << 17)
+#define	POWER_CTRL_POLARITY_DC_OK			(1 << 16)
+#define	POWER_CTRL_DC_OK_IRQ				(1 << 15)
+#define	POWER_CTRL_ENIRQ_DC_OK				(1 << 14)
+#define	POWER_CTRL_BATT_BO_IRQ				(1 << 13)
+#define	POWER_CTRL_ENIRQ_BATT_BO			(1 << 12)
+#define	POWER_CTRL_VDDIO_BO_IRQ				(1 << 11)
+#define	POWER_CTRL_ENIRQ_VDDIO_BO			(1 << 10)
+#define	POWER_CTRL_VDDA_BO_IRQ				(1 << 9)
+#define	POWER_CTRL_ENIRQ_VDDA_BO			(1 << 8)
+#define	POWER_CTRL_VDDD_BO_IRQ				(1 << 7)
+#define	POWER_CTRL_ENIRQ_VDDD_BO			(1 << 6)
+#define	POWER_CTRL_POLARITY_VBUSVALID			(1 << 5)
+#define	POWER_CTRL_VBUS_VALID_IRQ			(1 << 4)
+#define	POWER_CTRL_ENIRQ_VBUS_VALID			(1 << 3)
+#define	POWER_CTRL_POLARITY_VDD5V_GT_VDDIO		(1 << 2)
+#define	POWER_CTRL_VDD5V_GT_VDDIO_IRQ			(1 << 1)
+#define	POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO			(1 << 0)
+
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_MASK		(0x3 << 28)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET		28
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V3			(0x0 << 28)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V4			(0x1 << 28)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V5			(0x2 << 28)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V7			(0x3 << 28)
+#define	POWER_5VCTRL_HEADROOM_ADJ_MASK			(0x7 << 24)
+#define	POWER_5VCTRL_HEADROOM_ADJ_OFFSET		24
+#define	POWER_5VCTRL_PWD_CHARGE_4P2_MASK		(0x1 << 20)
+#define	POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET		20
+#define	POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK		(0x3f << 12)
+#define	POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET		12
+#define	POWER_5VCTRL_VBUSVALID_TRSH_MASK		(0x7 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_OFFSET		8
+#define	POWER_5VCTRL_VBUSVALID_TRSH_2V9			(0x0 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V0			(0x1 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V1			(0x2 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V2			(0x3 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V3			(0x4 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V4			(0x5 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V5			(0x6 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V6			(0x7 << 8)
+#define	POWER_5VCTRL_PWDN_5VBRNOUT			(1 << 7)
+#define	POWER_5VCTRL_ENABLE_LINREG_ILIMIT		(1 << 6)
+#define	POWER_5VCTRL_DCDC_XFER				(1 << 5)
+#define	POWER_5VCTRL_VBUSVALID_5VDETECT			(1 << 4)
+#define	POWER_5VCTRL_VBUSVALID_TO_B			(1 << 3)
+#define	POWER_5VCTRL_ILIMIT_EQ_ZERO			(1 << 2)
+#define	POWER_5VCTRL_PWRUP_VBUS_CMPS			(1 << 1)
+#define	POWER_5VCTRL_ENABLE_DCDC			(1 << 0)
+
+#define	POWER_MINPWR_LOWPWR_4P2				(1 << 14)
+#define	POWER_MINPWR_VDAC_DUMP_CTRL			(1 << 13)
+#define	POWER_MINPWR_PWD_BO				(1 << 12)
+#define	POWER_MINPWR_USE_VDDXTAL_VBG			(1 << 11)
+#define	POWER_MINPWR_PWD_ANA_CMPS			(1 << 10)
+#define	POWER_MINPWR_ENABLE_OSC				(1 << 9)
+#define	POWER_MINPWR_SELECT_OSC				(1 << 8)
+#define	POWER_MINPWR_VBG_OFF				(1 << 7)
+#define	POWER_MINPWR_DOUBLE_FETS			(1 << 6)
+#define	POWER_MINPWR_HALFFETS				(1 << 5)
+#define	POWER_MINPWR_LESSANA_I				(1 << 4)
+#define	POWER_MINPWR_PWD_XTAL24				(1 << 3)
+#define	POWER_MINPWR_DC_STOPCLK				(1 << 2)
+#define	POWER_MINPWR_EN_DC_PFM				(1 << 1)
+#define	POWER_MINPWR_DC_HALFCLK				(1 << 0)
+
+#define	POWER_CHARGE_ADJ_VOLT_MASK			(0x7 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_OFFSET			24
+#define	POWER_CHARGE_ADJ_VOLT_M025P			(0x1 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P050P			(0x2 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M075P			(0x3 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P025P			(0x4 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M050P			(0x5 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P075P			(0x6 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M100P			(0x7 << 24)
+#define	POWER_CHARGE_ENABLE_LOAD			(1 << 22)
+#define	POWER_CHARGE_ENABLE_CHARGER_RESISTORS		(1 << 21)
+#define	POWER_CHARGE_ENABLE_FAULT_DETECT		(1 << 20)
+#define	POWER_CHARGE_CHRG_STS_OFF			(1 << 19)
+#define	POWER_CHARGE_USE_EXTERN_R			(1 << 17)
+#define	POWER_CHARGE_PWD_BATTCHRG			(1 << 16)
+#define	POWER_CHARGE_STOP_ILIMIT_MASK			(0xf << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_OFFSET			8
+#define	POWER_CHARGE_STOP_ILIMIT_10MA			(0x1 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_20MA			(0x2 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_50MA			(0x4 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_100MA			(0x8 << 8)
+#define	POWER_CHARGE_BATTCHRG_I_MASK			0x3f
+#define	POWER_CHARGE_BATTCHRG_I_OFFSET			0
+#define	POWER_CHARGE_BATTCHRG_I_10MA			0x01
+#define	POWER_CHARGE_BATTCHRG_I_20MA			0x02
+#define	POWER_CHARGE_BATTCHRG_I_50MA			0x04
+#define	POWER_CHARGE_BATTCHRG_I_100MA			0x08
+#define	POWER_CHARGE_BATTCHRG_I_200MA			0x10
+#define	POWER_CHARGE_BATTCHRG_I_400MA			0x20
+
+#define	POWER_VDDDCTRL_ADJTN_MASK			(0xf << 28)
+#define	POWER_VDDDCTRL_ADJTN_OFFSET			28
+#define	POWER_VDDDCTRL_PWDN_BRNOUT			(1 << 23)
+#define	POWER_VDDDCTRL_DISABLE_STEPPING			(1 << 22)
+#define	POWER_VDDDCTRL_ENABLE_LINREG			(1 << 21)
+#define	POWER_VDDDCTRL_DISABLE_FET			(1 << 20)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_MASK		(0x3 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_OFFSET		16
+#define	POWER_VDDDCTRL_LINREG_OFFSET_0STEPS		(0x0 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 16)
+#define	POWER_VDDDCTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDDCTRL_BO_OFFSET_OFFSET			8
+#define	POWER_VDDDCTRL_TRG_MASK				0x1f
+#define	POWER_VDDDCTRL_TRG_OFFSET			0
+
+#define	POWER_VDDACTRL_PWDN_BRNOUT			(1 << 19)
+#define	POWER_VDDACTRL_DISABLE_STEPPING			(1 << 18)
+#define	POWER_VDDACTRL_ENABLE_LINREG			(1 << 17)
+#define	POWER_VDDACTRL_DISABLE_FET			(1 << 16)
+#define	POWER_VDDACTRL_LINREG_OFFSET_MASK		(0x3 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_OFFSET		12
+#define	POWER_VDDACTRL_LINREG_OFFSET_0STEPS		(0x0 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 12)
+#define	POWER_VDDACTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDACTRL_BO_OFFSET_OFFSET			8
+#define	POWER_VDDACTRL_TRG_MASK				0x1f
+#define	POWER_VDDACTRL_TRG_OFFSET			0
+
+#define	POWER_VDDIOCTRL_ADJTN_MASK			(0xf << 20)
+#define	POWER_VDDIOCTRL_ADJTN_OFFSET			20
+#define	POWER_VDDIOCTRL_PWDN_BRNOUT			(1 << 18)
+#define	POWER_VDDIOCTRL_DISABLE_STEPPING		(1 << 17)
+#define	POWER_VDDIOCTRL_DISABLE_FET			(1 << 16)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_MASK		(0x3 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET		12
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS		(0x0 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 12)
+#define	POWER_VDDIOCTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDIOCTRL_BO_OFFSET_OFFSET		8
+#define	POWER_VDDIOCTRL_TRG_MASK			0x1f
+#define	POWER_VDDIOCTRL_TRG_OFFSET			0
+
+#define	POWER_VDDMEMCTRL_PULLDOWN_ACTIVE		(1 << 10)
+#define	POWER_VDDMEMCTRL_ENABLE_ILIMIT			(1 << 9)
+#define	POWER_VDDMEMCTRL_ENABLE_LINREG			(1 << 8)
+#define	POWER_VDDMEMCTRL_TRG_MASK			0x1f
+#define	POWER_VDDMEMCTRL_TRG_OFFSET			0
+
+#define	POWER_DCDC4P2_DROPOUT_CTRL_MASK			(0xf << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_OFFSET		28
+#define	POWER_DCDC4P2_DROPOUT_CTRL_200MV		(0x3 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_100MV		(0x2 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_50MV			(0x1 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_25MV			(0x0 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2		(0x0 << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT	(0x1 << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL		(0x2 << 28)
+#define	POWER_DCDC4P2_ISTEAL_THRESH_MASK		(0x3 << 24)
+#define	POWER_DCDC4P2_ISTEAL_THRESH_OFFSET		24
+#define	POWER_DCDC4P2_ENABLE_4P2			(1 << 23)
+#define	POWER_DCDC4P2_ENABLE_DCDC			(1 << 22)
+#define	POWER_DCDC4P2_HYST_DIR				(1 << 21)
+#define	POWER_DCDC4P2_HYST_THRESH			(1 << 20)
+#define	POWER_DCDC4P2_TRG_MASK				(0x7 << 16)
+#define	POWER_DCDC4P2_TRG_OFFSET			16
+#define	POWER_DCDC4P2_TRG_4V2				(0x0 << 16)
+#define	POWER_DCDC4P2_TRG_4V1				(0x1 << 16)
+#define	POWER_DCDC4P2_TRG_4V0				(0x2 << 16)
+#define	POWER_DCDC4P2_TRG_3V9				(0x3 << 16)
+#define	POWER_DCDC4P2_TRG_BATT				(0x4 << 16)
+#define	POWER_DCDC4P2_BO_MASK				(0x1f << 8)
+#define	POWER_DCDC4P2_BO_OFFSET				8
+#define	POWER_DCDC4P2_CMPTRIP_MASK			0x1f
+#define	POWER_DCDC4P2_CMPTRIP_OFFSET			0
+
+#define	POWER_MISC_FREQSEL_MASK				(0x7 << 4)
+#define	POWER_MISC_FREQSEL_OFFSET			4
+#define	POWER_MISC_FREQSEL_20MHZ			(0x1 << 4)
+#define	POWER_MISC_FREQSEL_24MHZ			(0x2 << 4)
+#define	POWER_MISC_FREQSEL_19MHZ			(0x3 << 4)
+#define	POWER_MISC_FREQSEL_14MHZ			(0x4 << 4)
+#define	POWER_MISC_FREQSEL_18MHZ			(0x5 << 4)
+#define	POWER_MISC_FREQSEL_21MHZ			(0x6 << 4)
+#define	POWER_MISC_FREQSEL_17MHZ			(0x7 << 4)
+#define	POWER_MISC_DISABLE_FET_BO_LOGIC			(1 << 3)
+#define	POWER_MISC_DELAY_TIMING				(1 << 2)
+#define	POWER_MISC_TEST					(1 << 1)
+#define	POWER_MISC_SEL_PLLCLK				(1 << 0)
+
+#define	POWER_DCLIMITS_POSLIMIT_BUCK_MASK		(0x7f << 8)
+#define	POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET		8
+#define	POWER_DCLIMITS_NEGLIMIT_MASK			0x7f
+#define	POWER_DCLIMITS_NEGLIMIT_OFFSET			0
+
+#define	POWER_LOOPCTRL_TOGGLE_DIF			(1 << 20)
+#define	POWER_LOOPCTRL_HYST_SIGN			(1 << 19)
+#define	POWER_LOOPCTRL_EN_CM_HYST			(1 << 18)
+#define	POWER_LOOPCTRL_EN_DF_HYST			(1 << 17)
+#define	POWER_LOOPCTRL_CM_HYST_THRESH			(1 << 16)
+#define	POWER_LOOPCTRL_DF_HYST_THRESH			(1 << 15)
+#define	POWER_LOOPCTRL_RCSCALE_THRESH			(1 << 14)
+#define	POWER_LOOPCTRL_EN_RCSCALE_MASK			(0x3 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_OFFSET		12
+#define	POWER_LOOPCTRL_EN_RCSCALE_DIS			(0x0 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_2X			(0x1 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_4X			(0x2 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_8X			(0x3 << 12)
+#define	POWER_LOOPCTRL_DC_FF_MASK			(0x7 << 8)
+#define	POWER_LOOPCTRL_DC_FF_OFFSET			8
+#define	POWER_LOOPCTRL_DC_R_MASK			(0xf << 4)
+#define	POWER_LOOPCTRL_DC_R_OFFSET			4
+#define	POWER_LOOPCTRL_DC_C_MASK			0x3
+#define	POWER_LOOPCTRL_DC_C_OFFSET			0
+#define	POWER_LOOPCTRL_DC_C_MAX				0x0
+#define	POWER_LOOPCTRL_DC_C_2X				0x1
+#define	POWER_LOOPCTRL_DC_C_4X				0x2
+#define	POWER_LOOPCTRL_DC_C_MIN				0x3
+
+#define	POWER_STS_PWRUP_SOURCE_MASK			(0x3f << 24)
+#define	POWER_STS_PWRUP_SOURCE_OFFSET			24
+#define	POWER_STS_PWRUP_SOURCE_5V			(0x20 << 24)
+#define	POWER_STS_PWRUP_SOURCE_RTC			(0x10 << 24)
+#define	POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH		(0x02 << 24)
+#define	POWER_STS_PWRUP_SOURCE_PSWITCH_MID		(0x01 << 24)
+#define	POWER_STS_PSWITCH_MASK				(0x3 << 20)
+#define	POWER_STS_PSWITCH_OFFSET			20
+#define	POWER_STS_AVALID0_STATUS			(1 << 17)
+#define	POWER_STS_BVALID0_STATUS			(1 << 16)
+#define	POWER_STS_VBUSVALID0_STATUS			(1 << 15)
+#define	POWER_STS_SESSEND0_STATUS			(1 << 14)
+#define	POWER_STS_BATT_BO				(1 << 13)
+#define	POWER_STS_VDD5V_FAULT				(1 << 12)
+#define	POWER_STS_CHRGSTS				(1 << 11)
+#define	POWER_STS_DCDC_4P2_BO				(1 << 10)
+#define	POWER_STS_DC_OK					(1 << 9)
+#define	POWER_STS_VDDIO_BO				(1 << 8)
+#define	POWER_STS_VDDA_BO				(1 << 7)
+#define	POWER_STS_VDDD_BO				(1 << 6)
+#define	POWER_STS_VDD5V_GT_VDDIO			(1 << 5)
+#define	POWER_STS_VDD5V_DROOP				(1 << 4)
+#define	POWER_STS_AVALID0				(1 << 3)
+#define	POWER_STS_BVALID0				(1 << 2)
+#define	POWER_STS_VBUSVALID0				(1 << 1)
+#define	POWER_STS_SESSEND0				(1 << 0)
+
+#define	POWER_SPEED_STATUS_MASK				(0xff << 16)
+#define	POWER_SPEED_STATUS_OFFSET			16
+#define	POWER_SPEED_CTRL_MASK				0x3
+#define	POWER_SPEED_CTRL_OFFSET				0
+#define	POWER_SPEED_CTRL_SS_OFF				0x0
+#define	POWER_SPEED_CTRL_SS_ON				0x1
+#define	POWER_SPEED_CTRL_SS_ENABLE			0x3
+
+#define	POWER_BATTMONITOR_BATT_VAL_MASK			(0x3ff << 16)
+#define	POWER_BATTMONITOR_BATT_VAL_OFFSET		16
+#define	POWER_BATTMONITOR_EN_BATADJ			(1 << 10)
+#define	POWER_BATTMONITOR_PWDN_BATTBRNOUT		(1 << 9)
+#define	POWER_BATTMONITOR_BRWNOUT_PWD			(1 << 8)
+#define	POWER_BATTMONITOR_BRWNOUT_LVL_MASK		0x1f
+#define	POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET		0
+
+#define	POWER_RESET_UNLOCK_MASK				(0xffff << 16)
+#define	POWER_RESET_UNLOCK_OFFSET			16
+#define	POWER_RESET_UNLOCK_KEY				(0x3e77 << 16)
+#define	POWER_RESET_PWD_OFF				(1 << 1)
+#define	POWER_RESET_PWD					(1 << 0)
+
+#define	POWER_DEBUG_VBUSVALIDPIOLOCK			(1 << 3)
+#define	POWER_DEBUG_AVALIDPIOLOCK			(1 << 2)
+#define	POWER_DEBUG_BVALIDPIOLOCK			(1 << 1)
+#define	POWER_DEBUG_SESSENDPIOLOCK			(1 << 0)
+
+#define	POWER_SPECIAL_TEST_MASK				0xffffffff
+#define	POWER_SPECIAL_TEST_OFFSET			0
+
+#define	POWER_VERSION_MAJOR_MASK			(0xff << 24)
+#define	POWER_VERSION_MAJOR_OFFSET			24
+#define	POWER_VERSION_MINOR_MASK			(0xff << 16)
+#define	POWER_VERSION_MINOR_OFFSET			16
+#define	POWER_VERSION_STEP_MASK				0xffff
+#define	POWER_VERSION_STEP_OFFSET			0
+
+#endif	/* __MX23_REGS_POWER_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-power-mx28.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-power-mx28.h
new file mode 100644
index 000000000..39250c506
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-power-mx28.h
@@ -0,0 +1,399 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 Power Controller Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#ifndef __MX28_REGS_POWER_H__
+#define __MX28_REGS_POWER_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_power_regs {
+	mxs_reg_32(hw_power_ctrl)
+	mxs_reg_32(hw_power_5vctrl)
+	mxs_reg_32(hw_power_minpwr)
+	mxs_reg_32(hw_power_charge)
+	uint32_t	hw_power_vdddctrl;
+	uint32_t	reserved_vddd[3];
+	uint32_t	hw_power_vddactrl;
+	uint32_t	reserved_vdda[3];
+	uint32_t	hw_power_vddioctrl;
+	uint32_t	reserved_vddio[3];
+	uint32_t	hw_power_vddmemctrl;
+	uint32_t	reserved_vddmem[3];
+	uint32_t	hw_power_dcdc4p2;
+	uint32_t	reserved_dcdc4p2[3];
+	uint32_t	hw_power_misc;
+	uint32_t	reserved_misc[3];
+	uint32_t	hw_power_dclimits;
+	uint32_t	reserved_dclimits[3];
+	mxs_reg_32(hw_power_loopctrl)
+	uint32_t	hw_power_sts;
+	uint32_t	reserved_sts[3];
+	mxs_reg_32(hw_power_speed)
+	uint32_t	hw_power_battmonitor;
+	uint32_t	reserved_battmonitor[3];
+
+	uint32_t	reserved[4];
+
+	mxs_reg_32(hw_power_reset)
+	mxs_reg_32(hw_power_debug)
+	mxs_reg_32(hw_power_thermal)
+	mxs_reg_32(hw_power_usb1ctrl)
+	mxs_reg_32(hw_power_special)
+	mxs_reg_32(hw_power_version)
+	mxs_reg_32(hw_power_anaclkctrl)
+	mxs_reg_32(hw_power_refctrl)
+};
+#endif
+
+#define	POWER_CTRL_PSWITCH_MID_TRAN			(1 << 27)
+#define	POWER_CTRL_DCDC4P2_BO_IRQ			(1 << 24)
+#define	POWER_CTRL_ENIRQ_DCDC4P2_BO			(1 << 23)
+#define	POWER_CTRL_VDD5V_DROOP_IRQ			(1 << 22)
+#define	POWER_CTRL_ENIRQ_VDD5V_DROOP			(1 << 21)
+#define	POWER_CTRL_PSWITCH_IRQ				(1 << 20)
+#define	POWER_CTRL_PSWITCH_IRQ_SRC			(1 << 19)
+#define	POWER_CTRL_POLARITY_PSWITCH			(1 << 18)
+#define	POWER_CTRL_ENIRQ_PSWITCH			(1 << 17)
+#define	POWER_CTRL_POLARITY_DC_OK			(1 << 16)
+#define	POWER_CTRL_DC_OK_IRQ				(1 << 15)
+#define	POWER_CTRL_ENIRQ_DC_OK				(1 << 14)
+#define	POWER_CTRL_BATT_BO_IRQ				(1 << 13)
+#define	POWER_CTRL_ENIRQ_BATT_BO			(1 << 12)
+#define	POWER_CTRL_VDDIO_BO_IRQ				(1 << 11)
+#define	POWER_CTRL_ENIRQ_VDDIO_BO			(1 << 10)
+#define	POWER_CTRL_VDDA_BO_IRQ				(1 << 9)
+#define	POWER_CTRL_ENIRQ_VDDA_BO			(1 << 8)
+#define	POWER_CTRL_VDDD_BO_IRQ				(1 << 7)
+#define	POWER_CTRL_ENIRQ_VDDD_BO			(1 << 6)
+#define	POWER_CTRL_POLARITY_VBUSVALID			(1 << 5)
+#define	POWER_CTRL_VBUS_VALID_IRQ			(1 << 4)
+#define	POWER_CTRL_ENIRQ_VBUS_VALID			(1 << 3)
+#define	POWER_CTRL_POLARITY_VDD5V_GT_VDDIO		(1 << 2)
+#define	POWER_CTRL_VDD5V_GT_VDDIO_IRQ			(1 << 1)
+#define	POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO			(1 << 0)
+
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_MASK		(0x3 << 30)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET		30
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V3			(0x0 << 30)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V4			(0x1 << 30)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V5			(0x2 << 30)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V7			(0x3 << 30)
+#define	POWER_5VCTRL_HEADROOM_ADJ_MASK			(0x7 << 24)
+#define	POWER_5VCTRL_HEADROOM_ADJ_OFFSET		24
+#define	POWER_5VCTRL_PWD_CHARGE_4P2_MASK		(0x3 << 20)
+#define	POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET		20
+#define	POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK		(0x3f << 12)
+#define	POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET		12
+#define	POWER_5VCTRL_VBUSVALID_TRSH_MASK		(0x7 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_OFFSET		8
+#define	POWER_5VCTRL_VBUSVALID_TRSH_2V9			(0x0 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V0			(0x1 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V1			(0x2 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V2			(0x3 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V3			(0x4 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V4			(0x5 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V5			(0x6 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V6			(0x7 << 8)
+#define	POWER_5VCTRL_PWDN_5VBRNOUT			(1 << 7)
+#define	POWER_5VCTRL_ENABLE_LINREG_ILIMIT		(1 << 6)
+#define	POWER_5VCTRL_DCDC_XFER				(1 << 5)
+#define	POWER_5VCTRL_VBUSVALID_5VDETECT			(1 << 4)
+#define	POWER_5VCTRL_VBUSVALID_TO_B			(1 << 3)
+#define	POWER_5VCTRL_ILIMIT_EQ_ZERO			(1 << 2)
+#define	POWER_5VCTRL_PWRUP_VBUS_CMPS			(1 << 1)
+#define	POWER_5VCTRL_ENABLE_DCDC			(1 << 0)
+
+#define	POWER_MINPWR_LOWPWR_4P2				(1 << 14)
+#define	POWER_MINPWR_PWD_BO				(1 << 12)
+#define	POWER_MINPWR_USE_VDDXTAL_VBG			(1 << 11)
+#define	POWER_MINPWR_PWD_ANA_CMPS			(1 << 10)
+#define	POWER_MINPWR_ENABLE_OSC				(1 << 9)
+#define	POWER_MINPWR_SELECT_OSC				(1 << 8)
+#define	POWER_MINPWR_VBG_OFF				(1 << 7)
+#define	POWER_MINPWR_DOUBLE_FETS			(1 << 6)
+#define	POWER_MINPWR_HALFFETS				(1 << 5)
+#define	POWER_MINPWR_LESSANA_I				(1 << 4)
+#define	POWER_MINPWR_PWD_XTAL24				(1 << 3)
+#define	POWER_MINPWR_DC_STOPCLK				(1 << 2)
+#define	POWER_MINPWR_EN_DC_PFM				(1 << 1)
+#define	POWER_MINPWR_DC_HALFCLK				(1 << 0)
+
+#define	POWER_CHARGE_ADJ_VOLT_MASK			(0x7 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_OFFSET			24
+#define	POWER_CHARGE_ADJ_VOLT_M025P			(0x1 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P050P			(0x2 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M075P			(0x3 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P025P			(0x4 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M050P			(0x5 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P075P			(0x6 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M100P			(0x7 << 24)
+#define	POWER_CHARGE_ENABLE_LOAD			(1 << 22)
+#define	POWER_CHARGE_ENABLE_FAULT_DETECT		(1 << 20)
+#define	POWER_CHARGE_CHRG_STS_OFF			(1 << 19)
+#define	POWER_CHARGE_LIION_4P1				(1 << 18)
+#define	POWER_CHARGE_PWD_BATTCHRG			(1 << 16)
+#define	POWER_CHARGE_ENABLE_CHARGER_USB1		(1 << 13)
+#define	POWER_CHARGE_ENABLE_CHARGER_USB0		(1 << 12)
+#define	POWER_CHARGE_STOP_ILIMIT_MASK			(0xf << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_OFFSET			8
+#define	POWER_CHARGE_STOP_ILIMIT_10MA			(0x1 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_20MA			(0x2 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_50MA			(0x4 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_100MA			(0x8 << 8)
+#define	POWER_CHARGE_BATTCHRG_I_MASK			0x3f
+#define	POWER_CHARGE_BATTCHRG_I_OFFSET			0
+#define	POWER_CHARGE_BATTCHRG_I_10MA			0x01
+#define	POWER_CHARGE_BATTCHRG_I_20MA			0x02
+#define	POWER_CHARGE_BATTCHRG_I_50MA			0x04
+#define	POWER_CHARGE_BATTCHRG_I_100MA			0x08
+#define	POWER_CHARGE_BATTCHRG_I_200MA			0x10
+#define	POWER_CHARGE_BATTCHRG_I_400MA			0x20
+
+#define	POWER_VDDDCTRL_ADJTN_MASK			(0xf << 28)
+#define	POWER_VDDDCTRL_ADJTN_OFFSET			28
+#define	POWER_VDDDCTRL_PWDN_BRNOUT			(1 << 23)
+#define	POWER_VDDDCTRL_DISABLE_STEPPING			(1 << 22)
+#define	POWER_VDDDCTRL_ENABLE_LINREG			(1 << 21)
+#define	POWER_VDDDCTRL_DISABLE_FET			(1 << 20)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_MASK		(0x3 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_OFFSET		16
+#define	POWER_VDDDCTRL_LINREG_OFFSET_0STEPS		(0x0 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 16)
+#define	POWER_VDDDCTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDDCTRL_BO_OFFSET_OFFSET			8
+#define	POWER_VDDDCTRL_TRG_MASK				0x1f
+#define	POWER_VDDDCTRL_TRG_OFFSET			0
+
+#define	POWER_VDDACTRL_PWDN_BRNOUT			(1 << 19)
+#define	POWER_VDDACTRL_DISABLE_STEPPING			(1 << 18)
+#define	POWER_VDDACTRL_ENABLE_LINREG			(1 << 17)
+#define	POWER_VDDACTRL_DISABLE_FET			(1 << 16)
+#define	POWER_VDDACTRL_LINREG_OFFSET_MASK		(0x3 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_OFFSET		12
+#define	POWER_VDDACTRL_LINREG_OFFSET_0STEPS		(0x0 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 12)
+#define	POWER_VDDACTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDACTRL_BO_OFFSET_OFFSET			8
+#define	POWER_VDDACTRL_TRG_MASK				0x1f
+#define	POWER_VDDACTRL_TRG_OFFSET			0
+
+#define	POWER_VDDIOCTRL_ADJTN_MASK			(0xf << 20)
+#define	POWER_VDDIOCTRL_ADJTN_OFFSET			20
+#define	POWER_VDDIOCTRL_PWDN_BRNOUT			(1 << 18)
+#define	POWER_VDDIOCTRL_DISABLE_STEPPING		(1 << 17)
+#define	POWER_VDDIOCTRL_DISABLE_FET			(1 << 16)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_MASK		(0x3 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET		12
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS		(0x0 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 12)
+#define	POWER_VDDIOCTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDIOCTRL_BO_OFFSET_OFFSET		8
+#define	POWER_VDDIOCTRL_TRG_MASK			0x1f
+#define	POWER_VDDIOCTRL_TRG_OFFSET			0
+
+#define	POWER_VDDMEMCTRL_PULLDOWN_ACTIVE		(1 << 10)
+#define	POWER_VDDMEMCTRL_ENABLE_ILIMIT			(1 << 9)
+#define	POWER_VDDMEMCTRL_ENABLE_LINREG			(1 << 8)
+#define	POWER_VDDMEMCTRL_BO_OFFSET_MASK			(0x7 << 5)
+#define	POWER_VDDMEMCTRL_BO_OFFSET_OFFSET		5
+#define	POWER_VDDMEMCTRL_TRG_MASK			0x1f
+#define	POWER_VDDMEMCTRL_TRG_OFFSET			0
+
+#define	POWER_DCDC4P2_DROPOUT_CTRL_MASK			(0xf << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_OFFSET		28
+#define	POWER_DCDC4P2_DROPOUT_CTRL_200MV		(0x3 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_100MV		(0x2 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_50MV			(0x1 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_25MV			(0x0 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2		(0x0 << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT	(0x1 << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL		(0x2 << 28)
+#define	POWER_DCDC4P2_ISTEAL_THRESH_MASK		(0x3 << 24)
+#define	POWER_DCDC4P2_ISTEAL_THRESH_OFFSET		24
+#define	POWER_DCDC4P2_ENABLE_4P2			(1 << 23)
+#define	POWER_DCDC4P2_ENABLE_DCDC			(1 << 22)
+#define	POWER_DCDC4P2_HYST_DIR				(1 << 21)
+#define	POWER_DCDC4P2_HYST_THRESH			(1 << 20)
+#define	POWER_DCDC4P2_TRG_MASK				(0x7 << 16)
+#define	POWER_DCDC4P2_TRG_OFFSET			16
+#define	POWER_DCDC4P2_TRG_4V2				(0x0 << 16)
+#define	POWER_DCDC4P2_TRG_4V1				(0x1 << 16)
+#define	POWER_DCDC4P2_TRG_4V0				(0x2 << 16)
+#define	POWER_DCDC4P2_TRG_3V9				(0x3 << 16)
+#define	POWER_DCDC4P2_TRG_BATT				(0x4 << 16)
+#define	POWER_DCDC4P2_BO_MASK				(0x1f << 8)
+#define	POWER_DCDC4P2_BO_OFFSET				8
+#define	POWER_DCDC4P2_CMPTRIP_MASK			0x1f
+#define	POWER_DCDC4P2_CMPTRIP_OFFSET			0
+
+#define	POWER_MISC_FREQSEL_MASK				(0x7 << 4)
+#define	POWER_MISC_FREQSEL_OFFSET			4
+#define	POWER_MISC_FREQSEL_20MHZ			(0x1 << 4)
+#define	POWER_MISC_FREQSEL_24MHZ			(0x2 << 4)
+#define	POWER_MISC_FREQSEL_19MHZ			(0x3 << 4)
+#define	POWER_MISC_FREQSEL_14MHZ			(0x4 << 4)
+#define	POWER_MISC_FREQSEL_18MHZ			(0x5 << 4)
+#define	POWER_MISC_FREQSEL_21MHZ			(0x6 << 4)
+#define	POWER_MISC_FREQSEL_17MHZ			(0x7 << 4)
+#define	POWER_MISC_DISABLE_FET_BO_LOGIC			(1 << 3)
+#define	POWER_MISC_DELAY_TIMING				(1 << 2)
+#define	POWER_MISC_TEST					(1 << 1)
+#define	POWER_MISC_SEL_PLLCLK				(1 << 0)
+
+#define	POWER_DCLIMITS_POSLIMIT_BUCK_MASK		(0x7f << 8)
+#define	POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET		8
+#define	POWER_DCLIMITS_NEGLIMIT_MASK			0x7f
+#define	POWER_DCLIMITS_NEGLIMIT_OFFSET			0
+
+#define	POWER_LOOPCTRL_TOGGLE_DIF			(1 << 20)
+#define	POWER_LOOPCTRL_HYST_SIGN			(1 << 19)
+#define	POWER_LOOPCTRL_EN_CM_HYST			(1 << 18)
+#define	POWER_LOOPCTRL_EN_DF_HYST			(1 << 17)
+#define	POWER_LOOPCTRL_CM_HYST_THRESH			(1 << 16)
+#define	POWER_LOOPCTRL_DF_HYST_THRESH			(1 << 15)
+#define	POWER_LOOPCTRL_RCSCALE_THRESH			(1 << 14)
+#define	POWER_LOOPCTRL_EN_RCSCALE_MASK			(0x3 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_OFFSET		12
+#define	POWER_LOOPCTRL_EN_RCSCALE_DIS			(0x0 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_2X			(0x1 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_4X			(0x2 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_8X			(0x3 << 12)
+#define	POWER_LOOPCTRL_DC_FF_MASK			(0x7 << 8)
+#define	POWER_LOOPCTRL_DC_FF_OFFSET			8
+#define	POWER_LOOPCTRL_DC_R_MASK			(0xf << 4)
+#define	POWER_LOOPCTRL_DC_R_OFFSET			4
+#define	POWER_LOOPCTRL_DC_C_MASK			0x3
+#define	POWER_LOOPCTRL_DC_C_OFFSET			0
+#define	POWER_LOOPCTRL_DC_C_MAX				0x0
+#define	POWER_LOOPCTRL_DC_C_2X				0x1
+#define	POWER_LOOPCTRL_DC_C_4X				0x2
+#define	POWER_LOOPCTRL_DC_C_MIN				0x3
+
+#define	POWER_STS_PWRUP_SOURCE_MASK			(0x3f << 24)
+#define	POWER_STS_PWRUP_SOURCE_OFFSET			24
+#define	POWER_STS_PWRUP_SOURCE_5V			(0x20 << 24)
+#define	POWER_STS_PWRUP_SOURCE_RTC			(0x10 << 24)
+#define	POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH		(0x02 << 24)
+#define	POWER_STS_PWRUP_SOURCE_PSWITCH_MID		(0x01 << 24)
+#define	POWER_STS_PSWITCH_MASK				(0x3 << 20)
+#define	POWER_STS_PSWITCH_OFFSET			20
+#define	POWER_STS_THERMAL_WARNING			(1 << 19)
+#define	POWER_STS_VDDMEM_BO				(1 << 18)
+#define	POWER_STS_AVALID0_STATUS			(1 << 17)
+#define	POWER_STS_BVALID0_STATUS			(1 << 16)
+#define	POWER_STS_VBUSVALID0_STATUS			(1 << 15)
+#define	POWER_STS_SESSEND0_STATUS			(1 << 14)
+#define	POWER_STS_BATT_BO				(1 << 13)
+#define	POWER_STS_VDD5V_FAULT				(1 << 12)
+#define	POWER_STS_CHRGSTS				(1 << 11)
+#define	POWER_STS_DCDC_4P2_BO				(1 << 10)
+#define	POWER_STS_DC_OK					(1 << 9)
+#define	POWER_STS_VDDIO_BO				(1 << 8)
+#define	POWER_STS_VDDA_BO				(1 << 7)
+#define	POWER_STS_VDDD_BO				(1 << 6)
+#define	POWER_STS_VDD5V_GT_VDDIO			(1 << 5)
+#define	POWER_STS_VDD5V_DROOP				(1 << 4)
+#define	POWER_STS_AVALID0				(1 << 3)
+#define	POWER_STS_BVALID0				(1 << 2)
+#define	POWER_STS_VBUSVALID0				(1 << 1)
+#define	POWER_STS_SESSEND0				(1 << 0)
+
+#define	POWER_SPEED_STATUS_MASK				(0xffff << 8)
+#define	POWER_SPEED_STATUS_OFFSET			8
+#define	POWER_SPEED_STATUS_SEL_MASK			(0x3 << 6)
+#define	POWER_SPEED_STATUS_SEL_OFFSET			6
+#define	POWER_SPEED_STATUS_SEL_DCDC_STAT		(0x0 << 6)
+#define	POWER_SPEED_STATUS_SEL_CORE_STAT		(0x1 << 6)
+#define	POWER_SPEED_STATUS_SEL_ARM_STAT			(0x2 << 6)
+#define	POWER_SPEED_CTRL_MASK				0x3
+#define	POWER_SPEED_CTRL_OFFSET				0
+#define	POWER_SPEED_CTRL_SS_OFF				0x0
+#define	POWER_SPEED_CTRL_SS_ON				0x1
+#define	POWER_SPEED_CTRL_SS_ENABLE			0x3
+
+#define	POWER_BATTMONITOR_BATT_VAL_MASK			(0x3ff << 16)
+#define	POWER_BATTMONITOR_BATT_VAL_OFFSET		16
+#define	POWER_BATTMONITOR_PWDN_BATTBRNOUT_5VDETECT_EN	(1 << 11)
+#define	POWER_BATTMONITOR_EN_BATADJ			(1 << 10)
+#define	POWER_BATTMONITOR_PWDN_BATTBRNOUT		(1 << 9)
+#define	POWER_BATTMONITOR_BRWNOUT_PWD			(1 << 8)
+#define	POWER_BATTMONITOR_BRWNOUT_LVL_MASK		0x1f
+#define	POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET		0
+
+#define	POWER_RESET_UNLOCK_MASK				(0xffff << 16)
+#define	POWER_RESET_UNLOCK_OFFSET			16
+#define	POWER_RESET_UNLOCK_KEY				(0x3e77 << 16)
+#define	POWER_RESET_FASTFALL_PSWITCH_OFF		(1 << 2)
+#define	POWER_RESET_PWD_OFF				(1 << 1)
+#define	POWER_RESET_PWD					(1 << 0)
+
+#define	POWER_DEBUG_VBUSVALIDPIOLOCK			(1 << 3)
+#define	POWER_DEBUG_AVALIDPIOLOCK			(1 << 2)
+#define	POWER_DEBUG_BVALIDPIOLOCK			(1 << 1)
+#define	POWER_DEBUG_SESSENDPIOLOCK			(1 << 0)
+
+#define	POWER_THERMAL_TEST				(1 << 8)
+#define	POWER_THERMAL_PWD				(1 << 7)
+#define	POWER_THERMAL_LOW_POWER				(1 << 6)
+#define	POWER_THERMAL_OFFSET_ADJ_MASK			(0x3 << 4)
+#define	POWER_THERMAL_OFFSET_ADJ_OFFSET			4
+#define	POWER_THERMAL_OFFSET_ADJ_ENABLE			(1 << 3)
+#define	POWER_THERMAL_TEMP_THRESHOLD_MASK		0x7
+#define	POWER_THERMAL_TEMP_THRESHOLD_OFFSET		0
+
+#define	POWER_USB1CTRL_AVALID1				(1 << 3)
+#define	POWER_USB1CTRL_BVALID1				(1 << 2)
+#define	POWER_USB1CTRL_VBUSVALID1			(1 << 1)
+#define	POWER_USB1CTRL_SESSEND1				(1 << 0)
+
+#define	POWER_SPECIAL_TEST_MASK				0xffffffff
+#define	POWER_SPECIAL_TEST_OFFSET			0
+
+#define	POWER_VERSION_MAJOR_MASK			(0xff << 24)
+#define	POWER_VERSION_MAJOR_OFFSET			24
+#define	POWER_VERSION_MINOR_MASK			(0xff << 16)
+#define	POWER_VERSION_MINOR_OFFSET			16
+#define	POWER_VERSION_STEP_MASK				0xffff
+#define	POWER_VERSION_STEP_OFFSET			0
+
+#define	POWER_ANACLKCTRL_CLKGATE_0			(1 << 31)
+#define	POWER_ANACLKCTRL_OUTDIV_MASK			(0x7 << 28)
+#define	POWER_ANACLKCTRL_OUTDIV_OFFSET			28
+#define	POWER_ANACLKCTRL_INVERT_OUTCLK			(1 << 27)
+#define	POWER_ANACLKCTRL_CLKGATE_I			(1 << 26)
+#define	POWER_ANACLKCTRL_DITHER_OFF			(1 << 10)
+#define	POWER_ANACLKCTRL_SLOW_DITHER			(1 << 9)
+#define	POWER_ANACLKCTRL_INVERT_INCLK			(1 << 8)
+#define	POWER_ANACLKCTRL_INCLK_SHIFT_MASK		(0x3 << 4)
+#define	POWER_ANACLKCTRL_INCLK_SHIFT_OFFSET		4
+#define	POWER_ANACLKCTRL_INDIV_MASK			0x7
+#define	POWER_ANACLKCTRL_INDIV_OFFSET			0
+
+#define	POWER_REFCTRL_FASTSETTLING			(1 << 26)
+#define	POWER_REFCTRL_RAISE_REF				(1 << 25)
+#define	POWER_REFCTRL_XTAL_BGR_BIAS			(1 << 24)
+#define	POWER_REFCTRL_VBG_ADJ_MASK			(0x7 << 20)
+#define	POWER_REFCTRL_VBG_ADJ_OFFSET			20
+#define	POWER_REFCTRL_LOW_PWR				(1 << 19)
+#define	POWER_REFCTRL_BIAS_CTRL_MASK			(0x3 << 16)
+#define	POWER_REFCTRL_BIAS_CTRL_OFFSET			16
+#define	POWER_REFCTRL_VDDXTAL_TO_VDDD			(1 << 14)
+#define	POWER_REFCTRL_ADJ_ANA				(1 << 13)
+#define	POWER_REFCTRL_ADJ_VAG				(1 << 12)
+#define	POWER_REFCTRL_ANA_REFVAL_MASK			(0xf << 8)
+#define	POWER_REFCTRL_ANA_REFVAL_OFFSET			8
+#define	POWER_REFCTRL_VAG_VAL_MASK			(0xf << 4)
+#define	POWER_REFCTRL_VAG_VAL_OFFSET			4
+
+#endif	/* __MX28_REGS_POWER_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-rtc.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-rtc.h
new file mode 100644
index 000000000..8d6ba573d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-rtc.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 RTC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef __MX28_REGS_RTC_H__
+#define __MX28_REGS_RTC_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_rtc_regs {
+	mxs_reg_32(hw_rtc_ctrl)
+	mxs_reg_32(hw_rtc_stat)
+	mxs_reg_32(hw_rtc_milliseconds)
+	mxs_reg_32(hw_rtc_seconds)
+	mxs_reg_32(hw_rtc_rtc_alarm)
+	mxs_reg_32(hw_rtc_watchdog)
+	mxs_reg_32(hw_rtc_persistent0)
+	mxs_reg_32(hw_rtc_persistent1)
+	mxs_reg_32(hw_rtc_persistent2)
+	mxs_reg_32(hw_rtc_persistent3)
+	mxs_reg_32(hw_rtc_persistent4)
+	mxs_reg_32(hw_rtc_persistent5)
+	mxs_reg_32(hw_rtc_debug)
+	mxs_reg_32(hw_rtc_version)
+};
+#endif
+
+#define	RTC_CTRL_SFTRST				(1 << 31)
+#define	RTC_CTRL_CLKGATE			(1 << 30)
+#define	RTC_CTRL_SUPPRESS_COPY2ANALOG		(1 << 6)
+#define	RTC_CTRL_FORCE_UPDATE			(1 << 5)
+#define	RTC_CTRL_WATCHDOGEN			(1 << 4)
+#define	RTC_CTRL_ONEMSEC_IRQ			(1 << 3)
+#define	RTC_CTRL_ALARM_IRQ			(1 << 2)
+#define	RTC_CTRL_ONEMSEC_IRQ_EN			(1 << 1)
+#define	RTC_CTRL_ALARM_IRQ_EN			(1 << 0)
+
+#define	RTC_STAT_RTC_PRESENT			(1 << 31)
+#define	RTC_STAT_ALARM_PRESENT			(1 << 30)
+#define	RTC_STAT_WATCHDOG_PRESENT		(1 << 29)
+#define	RTC_STAT_XTAL32000_PRESENT		(1 << 28)
+#define	RTC_STAT_XTAL32768_PRESENT		(1 << 27)
+#define	RTC_STAT_STALE_REGS_MASK		(0xff << 16)
+#define	RTC_STAT_STALE_REGS_OFFSET		16
+#define	RTC_STAT_NEW_REGS_MASK			(0xff << 8)
+#define	RTC_STAT_NEW_REGS_OFFSET		8
+
+#define	RTC_MILLISECONDS_COUNT_MASK		0xffffffff
+#define	RTC_MILLISECONDS_COUNT_OFFSET		0
+
+#define	RTC_SECONDS_COUNT_MASK			0xffffffff
+#define	RTC_SECONDS_COUNT_OFFSET		0
+
+#define	RTC_ALARM_VALUE_MASK			0xffffffff
+#define	RTC_ALARM_VALUE_OFFSET			0
+
+#define	RTC_WATCHDOG_COUNT_MASK			0xffffffff
+#define	RTC_WATCHDOG_COUNT_OFFSET		0
+
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_MASK	(0xf << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_OFFSET	28
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V83	(0x0 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V78	(0x1 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V73	(0x2 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V68	(0x3 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V62	(0x4 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V57	(0x5 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V52	(0x6 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V48	(0x7 << 28)
+#define	RTC_PERSISTENT0_EXTERNAL_RESET		(1 << 21)
+#define	RTC_PERSISTENT0_THERMAL_RESET		(1 << 20)
+#define	RTC_PERSISTENT0_ENABLE_LRADC_PWRUP	(1 << 18)
+#define	RTC_PERSISTENT0_AUTO_RESTART		(1 << 17)
+#define	RTC_PERSISTENT0_DISABLE_PSWITCH		(1 << 16)
+#define	RTC_PERSISTENT0_LOWERBIAS_MASK		(0xf << 14)
+#define	RTC_PERSISTENT0_LOWERBIAS_OFFSET	14
+#define	RTC_PERSISTENT0_LOWERBIAS_NOMINAL	(0x0 << 14)
+#define	RTC_PERSISTENT0_LOWERBIAS_M25P		(0x1 << 14)
+#define	RTC_PERSISTENT0_LOWERBIAS_M50P		(0x3 << 14)
+#define	RTC_PERSISTENT0_DISABLE_XTALOK		(1 << 13)
+#define	RTC_PERSISTENT0_MSEC_RES_MASK		(0x1f << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_OFFSET		8
+#define	RTC_PERSISTENT0_MSEC_RES_1MS		(0x01 << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_2MS		(0x02 << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_4MS		(0x04 << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_8MS		(0x08 << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_16MS		(0x10 << 8)
+#define	RTC_PERSISTENT0_ALARM_WAKE		(1 << 7)
+#define	RTC_PERSISTENT0_XTAL32_FREQ		(1 << 6)
+#define	RTC_PERSISTENT0_XTAL32KHZ_PWRUP		(1 << 5)
+#define	RTC_PERSISTENT0_XTAL24KHZ_PWRUP		(1 << 4)
+#define	RTC_PERSISTENT0_LCK_SECS		(1 << 3)
+#define	RTC_PERSISTENT0_ALARM_EN		(1 << 2)
+#define	RTC_PERSISTENT0_ALARM_WAKE_EN		(1 << 1)
+#define	RTC_PERSISTENT0_CLOCKSOURCE		(1 << 0)
+
+#define	RTC_PERSISTENT1_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT1_GENERAL_OFFSET		0
+#define	RTC_PERSISTENT1_GENERAL_OTG_ALT_ROLE	0x0080
+#define	RTC_PERSISTENT1_GENERAL_OTG_HNP		0x0100
+#define	RTC_PERSISTENT1_GENERAL_USB_LPM		0x0200
+#define	RTC_PERSISTENT1_GENERAL_SKIP_CHECKDISK	0x0400
+#define	RTC_PERSISTENT1_GENERAL_USB_BOOT_PLAYER	0x0800
+#define	RTC_PERSISTENT1_GENERAL_ENUM_500MA_2X	0x1000
+
+#define	RTC_PERSISTENT2_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT2_GENERAL_OFFSET		0
+
+#define	RTC_PERSISTENT3_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT3_GENERAL_OFFSET		0
+
+#define	RTC_PERSISTENT4_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT4_GENERAL_OFFSET		0
+
+#define	RTC_PERSISTENT5_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT5_GENERAL_OFFSET		0
+
+#define	RTC_DEBUG_WATCHDOG_RESET_MASK		(1 << 1)
+#define	RTC_DEBUG_WATCHDOG_RESET		(1 << 0)
+
+#define	RTC_VERSION_MAJOR_MASK			(0xff << 24)
+#define	RTC_VERSION_MAJOR_OFFSET		24
+#define	RTC_VERSION_MINOR_MASK			(0xff << 16)
+#define	RTC_VERSION_MINOR_OFFSET		16
+#define	RTC_VERSION_STEP_MASK			0xffff
+#define	RTC_VERSION_STEP_OFFSET			0
+
+#endif	/* __MX28_REGS_RTC_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-ssp.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-ssp.h
new file mode 100644
index 000000000..eeb7e7f44
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-ssp.h
@@ -0,0 +1,415 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 SSP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MX28_REGS_SSP_H__
+#define __MX28_REGS_SSP_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+#if defined(CONFIG_MX23)
+struct mxs_ssp_regs {
+	mxs_reg_32(hw_ssp_ctrl0)
+	mxs_reg_32(hw_ssp_cmd0)
+	mxs_reg_32(hw_ssp_cmd1)
+	mxs_reg_32(hw_ssp_compref)
+	mxs_reg_32(hw_ssp_compmask)
+	mxs_reg_32(hw_ssp_timing)
+	mxs_reg_32(hw_ssp_ctrl1)
+	mxs_reg_32(hw_ssp_data)
+	mxs_reg_32(hw_ssp_sdresp0)
+	mxs_reg_32(hw_ssp_sdresp1)
+	mxs_reg_32(hw_ssp_sdresp2)
+	mxs_reg_32(hw_ssp_sdresp3)
+	mxs_reg_32(hw_ssp_status)
+
+	uint32_t	reserved1[12];
+
+	mxs_reg_32(hw_ssp_debug)
+	mxs_reg_32(hw_ssp_version)
+};
+#elif defined(CONFIG_MX28)
+struct mxs_ssp_regs {
+	mxs_reg_32(hw_ssp_ctrl0)
+	mxs_reg_32(hw_ssp_cmd0)
+	mxs_reg_32(hw_ssp_cmd1)
+	mxs_reg_32(hw_ssp_xfer_size)
+	mxs_reg_32(hw_ssp_block_size)
+	mxs_reg_32(hw_ssp_compref)
+	mxs_reg_32(hw_ssp_compmask)
+	mxs_reg_32(hw_ssp_timing)
+	mxs_reg_32(hw_ssp_ctrl1)
+	mxs_reg_32(hw_ssp_data)
+	mxs_reg_32(hw_ssp_sdresp0)
+	mxs_reg_32(hw_ssp_sdresp1)
+	mxs_reg_32(hw_ssp_sdresp2)
+	mxs_reg_32(hw_ssp_sdresp3)
+	mxs_reg_32(hw_ssp_ddr_ctrl)
+	mxs_reg_32(hw_ssp_dll_ctrl)
+	mxs_reg_32(hw_ssp_status)
+	mxs_reg_32(hw_ssp_dll_sts)
+	mxs_reg_32(hw_ssp_debug)
+	mxs_reg_32(hw_ssp_version)
+};
+#endif
+
+static inline int mxs_ssp_bus_id_valid(int bus)
+{
+#if defined(CONFIG_MX23)
+	const unsigned int mxs_ssp_chan_count = 2;
+#elif defined(CONFIG_MX28)
+	const unsigned int mxs_ssp_chan_count = 4;
+#endif
+
+	if (bus >= mxs_ssp_chan_count)
+		return 0;
+
+	if (bus < 0)
+		return 0;
+
+	return 1;
+}
+
+static inline int mxs_ssp_clock_by_bus(unsigned int clock)
+{
+#if defined(CONFIG_MX23)
+	return 0;
+#elif defined(CONFIG_MX28)
+	return clock;
+#endif
+}
+
+static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port)
+{
+	switch (port) {
+	case 0:
+		return (struct mxs_ssp_regs *)MXS_SSP0_BASE;
+	case 1:
+		return (struct mxs_ssp_regs *)MXS_SSP1_BASE;
+#ifdef CONFIG_MX28
+	case 2:
+		return (struct mxs_ssp_regs *)MXS_SSP2_BASE;
+	case 3:
+		return (struct mxs_ssp_regs *)MXS_SSP3_BASE;
+#endif
+	default:
+		return NULL;
+	}
+}
+#endif
+
+#define	SSP_CTRL0_SFTRST			(1 << 31)
+#define	SSP_CTRL0_CLKGATE			(1 << 30)
+#define	SSP_CTRL0_RUN				(1 << 29)
+#define	SSP_CTRL0_SDIO_IRQ_CHECK		(1 << 28)
+#define	SSP_CTRL0_LOCK_CS			(1 << 27)
+#define	SSP_CTRL0_IGNORE_CRC			(1 << 26)
+#define	SSP_CTRL0_READ				(1 << 25)
+#define	SSP_CTRL0_DATA_XFER			(1 << 24)
+#define	SSP_CTRL0_BUS_WIDTH_MASK		(0x3 << 22)
+#define	SSP_CTRL0_BUS_WIDTH_OFFSET		22
+#define	SSP_CTRL0_BUS_WIDTH_ONE_BIT		(0x0 << 22)
+#define	SSP_CTRL0_BUS_WIDTH_FOUR_BIT		(0x1 << 22)
+#define	SSP_CTRL0_BUS_WIDTH_EIGHT_BIT		(0x2 << 22)
+#define	SSP_CTRL0_WAIT_FOR_IRQ			(1 << 21)
+#define	SSP_CTRL0_WAIT_FOR_CMD			(1 << 20)
+#define	SSP_CTRL0_LONG_RESP			(1 << 19)
+#define	SSP_CTRL0_CHECK_RESP			(1 << 18)
+#define	SSP_CTRL0_GET_RESP			(1 << 17)
+#define	SSP_CTRL0_ENABLE			(1 << 16)
+
+#ifdef CONFIG_MX23
+#define	SSP_CTRL0_XFER_COUNT_OFFSET		0
+#define	SSP_CTRL0_XFER_COUNT_MASK		0xffff
+#endif
+
+#define	SSP_CMD0_SOFT_TERMINATE			(1 << 26)
+#define	SSP_CMD0_DBL_DATA_RATE_EN		(1 << 25)
+#define	SSP_CMD0_PRIM_BOOT_OP_EN		(1 << 24)
+#define	SSP_CMD0_BOOT_ACK_EN			(1 << 23)
+#define	SSP_CMD0_SLOW_CLKING_EN			(1 << 22)
+#define	SSP_CMD0_CONT_CLKING_EN			(1 << 21)
+#define	SSP_CMD0_APPEND_8CYC			(1 << 20)
+#if defined(CONFIG_MX23)
+#define	SSP_CMD0_BLOCK_SIZE_MASK		(0xf << 16)
+#define	SSP_CMD0_BLOCK_SIZE_OFFSET		16
+#define	SSP_CMD0_BLOCK_COUNT_MASK		(0xff << 8)
+#define	SSP_CMD0_BLOCK_COUNT_OFFSET		8
+#endif
+#define	SSP_CMD0_CMD_MASK			0xff
+#define	SSP_CMD0_CMD_OFFSET			0
+#define	SSP_CMD0_CMD_MMC_GO_IDLE_STATE		0x00
+#define	SSP_CMD0_CMD_MMC_SEND_OP_COND		0x01
+#define	SSP_CMD0_CMD_MMC_ALL_SEND_CID		0x02
+#define	SSP_CMD0_CMD_MMC_SET_RELATIVE_ADDR	0x03
+#define	SSP_CMD0_CMD_MMC_SET_DSR		0x04
+#define	SSP_CMD0_CMD_MMC_RESERVED_5		0x05
+#define	SSP_CMD0_CMD_MMC_SWITCH			0x06
+#define	SSP_CMD0_CMD_MMC_SELECT_DESELECT_CARD	0x07
+#define	SSP_CMD0_CMD_MMC_SEND_EXT_CSD		0x08
+#define	SSP_CMD0_CMD_MMC_SEND_CSD		0x09
+#define	SSP_CMD0_CMD_MMC_SEND_CID		0x0a
+#define	SSP_CMD0_CMD_MMC_READ_DAT_UNTIL_STOP	0x0b
+#define	SSP_CMD0_CMD_MMC_STOP_TRANSMISSION	0x0c
+#define	SSP_CMD0_CMD_MMC_SEND_STATUS		0x0d
+#define	SSP_CMD0_CMD_MMC_BUSTEST_R		0x0e
+#define	SSP_CMD0_CMD_MMC_GO_INACTIVE_STATE	0x0f
+#define	SSP_CMD0_CMD_MMC_SET_BLOCKLEN		0x10
+#define	SSP_CMD0_CMD_MMC_READ_SINGLE_BLOCK	0x11
+#define	SSP_CMD0_CMD_MMC_READ_MULTIPLE_BLOCK	0x12
+#define	SSP_CMD0_CMD_MMC_BUSTEST_W		0x13
+#define	SSP_CMD0_CMD_MMC_WRITE_DAT_UNTIL_STOP	0x14
+#define	SSP_CMD0_CMD_MMC_SET_BLOCK_COUNT	0x17
+#define	SSP_CMD0_CMD_MMC_WRITE_BLOCK		0x18
+#define	SSP_CMD0_CMD_MMC_WRITE_MULTIPLE_BLOCK	0x19
+#define	SSP_CMD0_CMD_MMC_PROGRAM_CID		0x1a
+#define	SSP_CMD0_CMD_MMC_PROGRAM_CSD		0x1b
+#define	SSP_CMD0_CMD_MMC_SET_WRITE_PROT		0x1c
+#define	SSP_CMD0_CMD_MMC_CLR_WRITE_PROT		0x1d
+#define	SSP_CMD0_CMD_MMC_SEND_WRITE_PROT	0x1e
+#define	SSP_CMD0_CMD_MMC_ERASE_GROUP_START	0x23
+#define	SSP_CMD0_CMD_MMC_ERASE_GROUP_END	0x24
+#define	SSP_CMD0_CMD_MMC_ERASE			0x26
+#define	SSP_CMD0_CMD_MMC_FAST_IO		0x27
+#define	SSP_CMD0_CMD_MMC_GO_IRQ_STATE		0x28
+#define	SSP_CMD0_CMD_MMC_LOCK_UNLOCK		0x2a
+#define	SSP_CMD0_CMD_MMC_APP_CMD		0x37
+#define	SSP_CMD0_CMD_MMC_GEN_CMD		0x38
+#define	SSP_CMD0_CMD_SD_GO_IDLE_STATE		0x00
+#define	SSP_CMD0_CMD_SD_ALL_SEND_CID		0x02
+#define	SSP_CMD0_CMD_SD_SEND_RELATIVE_ADDR	0x03
+#define	SSP_CMD0_CMD_SD_SET_DSR			0x04
+#define	SSP_CMD0_CMD_SD_IO_SEND_OP_COND		0x05
+#define	SSP_CMD0_CMD_SD_SELECT_DESELECT_CARD	0x07
+#define	SSP_CMD0_CMD_SD_SEND_CSD		0x09
+#define	SSP_CMD0_CMD_SD_SEND_CID		0x0a
+#define	SSP_CMD0_CMD_SD_STOP_TRANSMISSION	0x0c
+#define	SSP_CMD0_CMD_SD_SEND_STATUS		0x0d
+#define	SSP_CMD0_CMD_SD_GO_INACTIVE_STATE	0x0f
+#define	SSP_CMD0_CMD_SD_SET_BLOCKLEN		0x10
+#define	SSP_CMD0_CMD_SD_READ_SINGLE_BLOCK	0x11
+#define	SSP_CMD0_CMD_SD_READ_MULTIPLE_BLOCK	0x12
+#define	SSP_CMD0_CMD_SD_WRITE_BLOCK		0x18
+#define	SSP_CMD0_CMD_SD_WRITE_MULTIPLE_BLOCK	0x19
+#define	SSP_CMD0_CMD_SD_PROGRAM_CSD		0x1b
+#define	SSP_CMD0_CMD_SD_SET_WRITE_PROT		0x1c
+#define	SSP_CMD0_CMD_SD_CLR_WRITE_PROT		0x1d
+#define	SSP_CMD0_CMD_SD_SEND_WRITE_PROT		0x1e
+#define	SSP_CMD0_CMD_SD_ERASE_WR_BLK_START	0x20
+#define	SSP_CMD0_CMD_SD_ERASE_WR_BLK_END	0x21
+#define	SSP_CMD0_CMD_SD_ERASE_GROUP_START	0x23
+#define	SSP_CMD0_CMD_SD_ERASE_GROUP_END		0x24
+#define	SSP_CMD0_CMD_SD_ERASE			0x26
+#define	SSP_CMD0_CMD_SD_LOCK_UNLOCK		0x2a
+#define	SSP_CMD0_CMD_SD_IO_RW_DIRECT		0x34
+#define	SSP_CMD0_CMD_SD_IO_RW_EXTENDED		0x35
+#define	SSP_CMD0_CMD_SD_APP_CMD			0x37
+#define	SSP_CMD0_CMD_SD_GEN_CMD			0x38
+
+#define	SSP_CMD1_CMD_ARG_MASK			0xffffffff
+#define	SSP_CMD1_CMD_ARG_OFFSET			0
+
+#if defined(CONFIG_MX28)
+#define	SSP_XFER_SIZE_XFER_COUNT_MASK		0xffffffff
+#define	SSP_XFER_SIZE_XFER_COUNT_OFFSET		0
+
+#define	SSP_BLOCK_SIZE_BLOCK_COUNT_MASK		(0xffffff << 4)
+#define	SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET	4
+#define	SSP_BLOCK_SIZE_BLOCK_SIZE_MASK		0xf
+#define	SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET	0
+#endif
+
+#define	SSP_COMPREF_REFERENCE_MASK		0xffffffff
+#define	SSP_COMPREF_REFERENCE_OFFSET		0
+
+#define	SSP_COMPMASK_MASK_MASK			0xffffffff
+#define	SSP_COMPMASK_MASK_OFFSET		0
+
+#define	SSP_TIMING_TIMEOUT_MASK			(0xffff << 16)
+#define	SSP_TIMING_TIMEOUT_OFFSET		16
+#define	SSP_TIMING_CLOCK_DIVIDE_MASK		(0xff << 8)
+#define	SSP_TIMING_CLOCK_DIVIDE_OFFSET		8
+#define	SSP_TIMING_CLOCK_RATE_MASK		0xff
+#define	SSP_TIMING_CLOCK_RATE_OFFSET		0
+
+#define	SSP_CTRL1_SDIO_IRQ			(1 << 31)
+#define	SSP_CTRL1_SDIO_IRQ_EN			(1 << 30)
+#define	SSP_CTRL1_RESP_ERR_IRQ			(1 << 29)
+#define	SSP_CTRL1_RESP_ERR_IRQ_EN		(1 << 28)
+#define	SSP_CTRL1_RESP_TIMEOUT_IRQ		(1 << 27)
+#define	SSP_CTRL1_RESP_TIMEOUT_IRQ_EN		(1 << 26)
+#define	SSP_CTRL1_DATA_TIMEOUT_IRQ		(1 << 25)
+#define	SSP_CTRL1_DATA_TIMEOUT_IRQ_EN		(1 << 24)
+#define	SSP_CTRL1_DATA_CRC_IRQ			(1 << 23)
+#define	SSP_CTRL1_DATA_CRC_IRQ_EN		(1 << 22)
+#define	SSP_CTRL1_FIFO_UNDERRUN_IRQ		(1 << 21)
+#define	SSP_CTRL1_FIFO_UNDERRUN_EN		(1 << 20)
+#define	SSP_CTRL1_CEATA_CCS_ERR_IRQ		(1 << 19)
+#define	SSP_CTRL1_CEATA_CCS_ERR_IRQ_EN		(1 << 18)
+#define	SSP_CTRL1_RECV_TIMEOUT_IRQ		(1 << 17)
+#define	SSP_CTRL1_RECV_TIMEOUT_IRQ_EN		(1 << 16)
+#define	SSP_CTRL1_FIFO_OVERRUN_IRQ		(1 << 15)
+#define	SSP_CTRL1_FIFO_OVERRUN_IRQ_EN		(1 << 14)
+#define	SSP_CTRL1_DMA_ENABLE			(1 << 13)
+#define	SSP_CTRL1_CEATA_CCS_ERR_EN		(1 << 12)
+#define	SSP_CTRL1_SLAVE_OUT_DISABLE		(1 << 11)
+#define	SSP_CTRL1_PHASE				(1 << 10)
+#define	SSP_CTRL1_POLARITY			(1 << 9)
+#define	SSP_CTRL1_SLAVE_MODE			(1 << 8)
+#define	SSP_CTRL1_WORD_LENGTH_MASK		(0xf << 4)
+#define	SSP_CTRL1_WORD_LENGTH_OFFSET		4
+#define	SSP_CTRL1_WORD_LENGTH_RESERVED0		(0x0 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_RESERVED1		(0x1 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_RESERVED2		(0x2 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_FOUR_BITS		(0x3 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_EIGHT_BITS	(0x7 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_SIXTEEN_BITS	(0xf << 4)
+#define	SSP_CTRL1_SSP_MODE_MASK			0xf
+#define	SSP_CTRL1_SSP_MODE_OFFSET		0
+#define	SSP_CTRL1_SSP_MODE_SPI			0x0
+#define	SSP_CTRL1_SSP_MODE_SSI			0x1
+#define	SSP_CTRL1_SSP_MODE_SD_MMC		0x3
+#define	SSP_CTRL1_SSP_MODE_MS			0x4
+
+#define	SSP_DATA_DATA_MASK			0xffffffff
+#define	SSP_DATA_DATA_OFFSET			0
+
+#define	SSP_SDRESP0_RESP0_MASK			0xffffffff
+#define	SSP_SDRESP0_RESP0_OFFSET		0
+
+#define	SSP_SDRESP1_RESP1_MASK			0xffffffff
+#define	SSP_SDRESP1_RESP1_OFFSET		0
+
+#define	SSP_SDRESP2_RESP2_MASK			0xffffffff
+#define	SSP_SDRESP2_RESP2_OFFSET		0
+
+#define	SSP_SDRESP3_RESP3_MASK			0xffffffff
+#define	SSP_SDRESP3_RESP3_OFFSET		0
+
+#define	SSP_DDR_CTRL_DMA_BURST_TYPE_MASK	(0x3 << 30)
+#define	SSP_DDR_CTRL_DMA_BURST_TYPE_OFFSET	30
+#define	SSP_DDR_CTRL_NIBBLE_POS			(1 << 1)
+#define	SSP_DDR_CTRL_TXCLK_DELAY_TYPE		(1 << 0)
+
+#define	SSP_DLL_CTRL_REF_UPDATE_INT_MASK	(0xf << 28)
+#define	SSP_DLL_CTRL_REF_UPDATE_INT_OFFSET	28
+#define	SSP_DLL_CTRL_SLV_UPDATE_INT_MASK	(0xff << 20)
+#define	SSP_DLL_CTRL_SLV_UPDATE_INT_OFFSET	20
+#define	SSP_DLL_CTRL_SLV_OVERRIDE_VAL_MASK	(0x3f << 10)
+#define	SSP_DLL_CTRL_SLV_OVERRIDE_VAL_OFFSET	10
+#define	SSP_DLL_CTRL_SLV_OVERRIDE		(1 << 9)
+#define	SSP_DLL_CTRL_GATE_UPDATE		(1 << 7)
+#define	SSP_DLL_CTRL_SLV_DLY_TARGET_MASK	(0xf << 3)
+#define	SSP_DLL_CTRL_SLV_DLY_TARGET_OFFSET	3
+#define	SSP_DLL_CTRL_SLV_FORCE_UPD		(1 << 2)
+#define	SSP_DLL_CTRL_RESET			(1 << 1)
+#define	SSP_DLL_CTRL_ENABLE			(1 << 0)
+
+#define	SSP_STATUS_PRESENT			(1 << 31)
+#define	SSP_STATUS_MS_PRESENT			(1 << 30)
+#define	SSP_STATUS_SD_PRESENT			(1 << 29)
+#define	SSP_STATUS_CARD_DETECT			(1 << 28)
+#define	SSP_STATUS_DMABURST			(1 << 22)
+#define	SSP_STATUS_DMASENSE			(1 << 21)
+#define	SSP_STATUS_DMATERM			(1 << 20)
+#define	SSP_STATUS_DMAREQ			(1 << 19)
+#define	SSP_STATUS_DMAEND			(1 << 18)
+#define	SSP_STATUS_SDIO_IRQ			(1 << 17)
+#define	SSP_STATUS_RESP_CRC_ERR			(1 << 16)
+#define	SSP_STATUS_RESP_ERR			(1 << 15)
+#define	SSP_STATUS_RESP_TIMEOUT			(1 << 14)
+#define	SSP_STATUS_DATA_CRC_ERR			(1 << 13)
+#define	SSP_STATUS_TIMEOUT			(1 << 12)
+#define	SSP_STATUS_RECV_TIMEOUT_STAT		(1 << 11)
+#define	SSP_STATUS_CEATA_CCS_ERR		(1 << 10)
+#define	SSP_STATUS_FIFO_OVRFLW			(1 << 9)
+#define	SSP_STATUS_FIFO_FULL			(1 << 8)
+#define	SSP_STATUS_FIFO_EMPTY			(1 << 5)
+#define	SSP_STATUS_FIFO_UNDRFLW			(1 << 4)
+#define	SSP_STATUS_CMD_BUSY			(1 << 3)
+#define	SSP_STATUS_DATA_BUSY			(1 << 2)
+#define	SSP_STATUS_BUSY				(1 << 0)
+
+#define	SSP_DLL_STS_REF_SEL_MASK		(0x3f << 8)
+#define	SSP_DLL_STS_REF_SEL_OFFSET		8
+#define	SSP_DLL_STS_SLV_SEL_MASK		(0x3f << 2)
+#define	SSP_DLL_STS_SLV_SEL_OFFSET		2
+#define	SSP_DLL_STS_REF_LOCK			(1 << 1)
+#define	SSP_DLL_STS_SLV_LOCK			(1 << 0)
+
+#define	SSP_DEBUG_DATACRC_ERR_MASK		(0xf << 28)
+#define	SSP_DEBUG_DATACRC_ERR_OFFSET		28
+#define	SSP_DEBUG_DATA_STALL			(1 << 27)
+#define	SSP_DEBUG_DAT_SM_MASK			(0x7 << 24)
+#define	SSP_DEBUG_DAT_SM_OFFSET			24
+#define	SSP_DEBUG_DAT_SM_DSM_IDLE		(0x0 << 24)
+#define	SSP_DEBUG_DAT_SM_DSM_WORD		(0x2 << 24)
+#define	SSP_DEBUG_DAT_SM_DSM_CRC1		(0x3 << 24)
+#define	SSP_DEBUG_DAT_SM_DSM_CRC2		(0x4 << 24)
+#define	SSP_DEBUG_DAT_SM_DSM_END		(0x5 << 24)
+#define	SSP_DEBUG_MSTK_SM_MASK			(0xf << 20)
+#define	SSP_DEBUG_MSTK_SM_OFFSET		20
+#define	SSP_DEBUG_MSTK_SM_MSTK_IDLE		(0x0 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_CKON		(0x1 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_BS1		(0x2 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_TPC		(0x3 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_BS2		(0x4 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_HDSHK		(0x5 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_BS3		(0x6 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_RW		(0x7 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_CRC1		(0x8 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_CRC2		(0x9 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_BS0		(0xa << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_END1		(0xb << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_END2W		(0xc << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_END2R		(0xd << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_DONE		(0xe << 20)
+#define	SSP_DEBUG_CMD_OE			(1 << 19)
+#define	SSP_DEBUG_DMA_SM_MASK			(0x7 << 16)
+#define	SSP_DEBUG_DMA_SM_OFFSET			16
+#define	SSP_DEBUG_DMA_SM_DMA_IDLE		(0x0 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_DMAREQ		(0x1 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_DMAACK		(0x2 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_STALL		(0x3 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_BUSY		(0x4 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_DONE		(0x5 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_COUNT		(0x6 << 16)
+#define	SSP_DEBUG_MMC_SM_MASK			(0xf << 12)
+#define	SSP_DEBUG_MMC_SM_OFFSET			12
+#define	SSP_DEBUG_MMC_SM_MMC_IDLE		(0x0 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_CMD		(0x1 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_TRC		(0x2 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_RESP		(0x3 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_RPRX		(0x4 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_TX			(0x5 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_CTOK		(0x6 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_RX			(0x7 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_CCS		(0x8 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_PUP		(0x9 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_WAIT		(0xa << 12)
+#define	SSP_DEBUG_CMD_SM_MASK			(0x3 << 10)
+#define	SSP_DEBUG_CMD_SM_OFFSET			10
+#define	SSP_DEBUG_CMD_SM_CSM_IDLE		(0x0 << 10)
+#define	SSP_DEBUG_CMD_SM_CSM_INDEX		(0x1 << 10)
+#define	SSP_DEBUG_CMD_SM_CSM_ARG		(0x2 << 10)
+#define	SSP_DEBUG_CMD_SM_CSM_CRC		(0x3 << 10)
+#define	SSP_DEBUG_SSP_CMD			(1 << 9)
+#define	SSP_DEBUG_SSP_RESP			(1 << 8)
+#define	SSP_DEBUG_SSP_RXD_MASK			0xff
+#define	SSP_DEBUG_SSP_RXD_OFFSET		0
+
+#define	SSP_VERSION_MAJOR_MASK			(0xff << 24)
+#define	SSP_VERSION_MAJOR_OFFSET		24
+#define	SSP_VERSION_MINOR_MASK			(0xff << 16)
+#define	SSP_VERSION_MINOR_OFFSET		16
+#define	SSP_VERSION_STEP_MASK			0xffff
+#define	SSP_VERSION_STEP_OFFSET			0
+
+#endif /* __MX28_REGS_SSP_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-timrot.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-timrot.h
new file mode 100644
index 000000000..9e19aabf1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-timrot.h
@@ -0,0 +1,258 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 TIMROT Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MX28_REGS_TIMROT_H__
+#define __MX28_REGS_TIMROT_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_timrot_regs {
+	mxs_reg_32(hw_timrot_rotctrl)
+	mxs_reg_32(hw_timrot_rotcount)
+#if defined(CONFIG_MX23)
+	mxs_reg_32(hw_timrot_timctrl0)
+	mxs_reg_32(hw_timrot_timcount0)
+	mxs_reg_32(hw_timrot_timctrl1)
+	mxs_reg_32(hw_timrot_timcount1)
+	mxs_reg_32(hw_timrot_timctrl2)
+	mxs_reg_32(hw_timrot_timcount2)
+	mxs_reg_32(hw_timrot_timctrl3)
+	mxs_reg_32(hw_timrot_timcount3)
+#elif defined(CONFIG_MX28)
+	mxs_reg_32(hw_timrot_timctrl0)
+	mxs_reg_32(hw_timrot_running_count0)
+	mxs_reg_32(hw_timrot_fixed_count0)
+	mxs_reg_32(hw_timrot_match_count0)
+	mxs_reg_32(hw_timrot_timctrl1)
+	mxs_reg_32(hw_timrot_running_count1)
+	mxs_reg_32(hw_timrot_fixed_count1)
+	mxs_reg_32(hw_timrot_match_count1)
+	mxs_reg_32(hw_timrot_timctrl2)
+	mxs_reg_32(hw_timrot_running_count2)
+	mxs_reg_32(hw_timrot_fixed_count2)
+	mxs_reg_32(hw_timrot_match_count2)
+	mxs_reg_32(hw_timrot_timctrl3)
+	mxs_reg_32(hw_timrot_running_count3)
+	mxs_reg_32(hw_timrot_fixed_count3)
+	mxs_reg_32(hw_timrot_match_count3)
+#endif
+	mxs_reg_32(hw_timrot_version)
+};
+#endif
+
+#define	TIMROT_ROTCTRL_SFTRST				(1 << 31)
+#define	TIMROT_ROTCTRL_CLKGATE				(1 << 30)
+#define	TIMROT_ROTCTRL_ROTARY_PRESENT			(1 << 29)
+#define	TIMROT_ROTCTRL_TIM3_PRESENT			(1 << 28)
+#define	TIMROT_ROTCTRL_TIM2_PRESENT			(1 << 27)
+#define	TIMROT_ROTCTRL_TIM1_PRESENT			(1 << 26)
+#define	TIMROT_ROTCTRL_TIM0_PRESENT			(1 << 25)
+#define	TIMROT_ROTCTRL_STATE_MASK			(0x7 << 22)
+#define	TIMROT_ROTCTRL_STATE_OFFSET			22
+#define	TIMROT_ROTCTRL_DIVIDER_MASK			(0x3f << 16)
+#define	TIMROT_ROTCTRL_DIVIDER_OFFSET			16
+#define	TIMROT_ROTCTRL_RELATIVE				(1 << 12)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_MASK			(0x3 << 10)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_OFFSET		10
+#define	TIMROT_ROTCTRL_OVERSAMPLE_8X			(0x0 << 10)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_4X			(0x1 << 10)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_2X			(0x2 << 10)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_1X			(0x3 << 10)
+#define	TIMROT_ROTCTRL_POLARITY_B			(1 << 9)
+#define	TIMROT_ROTCTRL_POLARITY_A			(1 << 8)
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_B_MASK			(0x7 << 4)
+#elif defined(CONFIG_MX28)
+#define	TIMROT_ROTCTRL_SELECT_B_MASK			(0xf << 4)
+#endif
+#define	TIMROT_ROTCTRL_SELECT_B_OFFSET			4
+#define	TIMROT_ROTCTRL_SELECT_B_NEVER_TICK		(0x0 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM0			(0x1 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM1			(0x2 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM2			(0x3 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM3			(0x4 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM4			(0x5 << 4)
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYA		(0x6 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYB		(0x7 << 4)
+#elif defined(CONFIG_MX28)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM5			(0x6 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM6			(0x7 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM7			(0x8 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYA			(0x9 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYB			(0xa << 4)
+#endif
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_A_MASK			0x7
+#elif defined(CONFIG_MX28)
+#define	TIMROT_ROTCTRL_SELECT_A_MASK			0xf
+#endif
+#define	TIMROT_ROTCTRL_SELECT_A_OFFSET			0
+#define	TIMROT_ROTCTRL_SELECT_A_NEVER_TICK		0x0
+#define	TIMROT_ROTCTRL_SELECT_A_PWM0			0x1
+#define	TIMROT_ROTCTRL_SELECT_A_PWM1			0x2
+#define	TIMROT_ROTCTRL_SELECT_A_PWM2			0x3
+#define	TIMROT_ROTCTRL_SELECT_A_PWM3			0x4
+#define	TIMROT_ROTCTRL_SELECT_A_PWM4			0x5
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYA		0x6
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYB		0x7
+#elif defined(CONFIG_MX28)
+#define	TIMROT_ROTCTRL_SELECT_A_PWM5			0x6
+#define	TIMROT_ROTCTRL_SELECT_A_PWM6			0x7
+#define	TIMROT_ROTCTRL_SELECT_A_PWM7			0x8
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYA			0x9
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYB			0xa
+#endif
+
+#define	TIMROT_ROTCOUNT_UPDOWN_MASK			0xffff
+#define	TIMROT_ROTCOUNT_UPDOWN_OFFSET			0
+
+#define	TIMROT_TIMCTRLn_IRQ				(1 << 15)
+#define	TIMROT_TIMCTRLn_IRQ_EN				(1 << 14)
+#if defined(CONFIG_MX28)
+#define	TIMROT_TIMCTRLn_MATCH_MODE			(1 << 11)
+#endif
+#define	TIMROT_TIMCTRLn_POLARITY			(1 << 8)
+#define	TIMROT_TIMCTRLn_UPDATE				(1 << 7)
+#define	TIMROT_TIMCTRLn_RELOAD				(1 << 6)
+#define	TIMROT_TIMCTRLn_PRESCALE_MASK			(0x3 << 4)
+#define	TIMROT_TIMCTRLn_PRESCALE_OFFSET			4
+#define	TIMROT_TIMCTRLn_PRESCALE_DIV_BY_1		(0x0 << 4)
+#define	TIMROT_TIMCTRLn_PRESCALE_DIV_BY_2		(0x1 << 4)
+#define	TIMROT_TIMCTRLn_PRESCALE_DIV_BY_4		(0x2 << 4)
+#define	TIMROT_TIMCTRLn_PRESCALE_DIV_BY_8		(0x3 << 4)
+#define	TIMROT_TIMCTRLn_SELECT_MASK			0xf
+#define	TIMROT_TIMCTRLn_SELECT_OFFSET			0
+#define	TIMROT_TIMCTRLn_SELECT_NEVER_TICK		0x0
+#define	TIMROT_TIMCTRLn_SELECT_PWM0			0x1
+#define	TIMROT_TIMCTRLn_SELECT_PWM1			0x2
+#define	TIMROT_TIMCTRLn_SELECT_PWM2			0x3
+#define	TIMROT_TIMCTRLn_SELECT_PWM3			0x4
+#define	TIMROT_TIMCTRLn_SELECT_PWM4			0x5
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYA		0x6
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYB		0x7
+#define	TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL		0x8
+#define	TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL		0x9
+#define	TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL		0xa
+#define	TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL		0xb
+#define	TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS		0xc
+#elif defined(CONFIG_MX28)
+#define	TIMROT_TIMCTRLn_SELECT_PWM5			0x6
+#define	TIMROT_TIMCTRLn_SELECT_PWM6			0x7
+#define	TIMROT_TIMCTRLn_SELECT_PWM7			0x8
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYA			0x9
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYB			0xa
+#define	TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL		0xb
+#define	TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL		0xc
+#define	TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL		0xd
+#define	TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL		0xe
+#define	TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS		0xf
+#endif
+
+#if defined(CONFIG_MX23)
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK	(0xffff << 16)
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET	16
+#elif defined(CONFIG_MX28)
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK	0xffffffff
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET	0
+#endif
+
+#if defined(CONFIG_MX23)
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK		0xffff
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET		0
+#elif defined(CONFIG_MX28)
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK		0xffffffff
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET		0
+#endif
+
+#if defined(CONFIG_MX28)
+#define	TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK		0xffffffff
+#define	TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET		0
+#endif
+
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_MASK		(0xf << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET		16
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_NEVER_TICK		(0x0 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM0		(0x1 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM1		(0x2 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2		(0x3 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3		(0x4 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4		(0x5 << 16)
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA		(0x6 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB		(0x7 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL		(0x8 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL		(0x9 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL		(0xa << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL		(0xb << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS		(0xc << 16)
+#elif defined(CONFIG_MX28)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5		(0x6 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6		(0x7 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7		(0x8 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA		(0x9 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB		(0xa << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL		(0xb << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL		(0xc << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL		(0xd << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL		(0xe << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS		(0xf << 16)
+#endif
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_IRQ				(1 << 15)
+#define	TIMROT_TIMCTRL3_IRQ_EN				(1 << 14)
+#define	TIMROT_TIMCTRL3_DUTU_VALID			(1 << 10)
+#endif
+#define	TIMROT_TIMCTRL3_DUTY_CYCLE			(1 << 9)
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_POLARITY_MASK			(0x1 << 8)
+#define	TIMROT_TIMCTRL3_POLARITY_OFFSET		8
+#define	TIMROT_TIMCTRL3_POLARITY_POSITIVE		(0x0 << 8)
+#define	TIMROT_TIMCTRL3_POLARITY_NEGATIVE		(0x1 << 8)
+#define	TIMROT_TIMCTRL3_UPDATE				(1 << 7)
+#define	TIMROT_TIMCTRL3_RELOAD				(1 << 6)
+#define	TIMROT_TIMCTRL3_PRESCALE_MASK			(0x3 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_OFFSET		4
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_1		(0x0 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_2		(0x1 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_4		(0x2 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_8		(0x3 << 4)
+#define	TIMROT_TIMCTRL3_SELECT_MASK			0xf
+#define	TIMROT_TIMCTRL3_SELECT_OFFSET			0
+#define	TIMROT_TIMCTRL3_SELECT_NEVER_TICK		0x0
+#define	TIMROT_TIMCTRL3_SELECT_PWM0			0x1
+#define	TIMROT_TIMCTRL3_SELECT_PWM1			0x2
+#define	TIMROT_TIMCTRL3_SELECT_PWM2			0x3
+#define	TIMROT_TIMCTRL3_SELECT_PWM3			0x4
+#define	TIMROT_TIMCTRL3_SELECT_PWM4			0x5
+#define	TIMROT_TIMCTRL3_SELECT_ROTARYA		0x6
+#define	TIMROT_TIMCTRL3_SELECT_ROTARYB		0x7
+#define	TIMROT_TIMCTRL3_SELECT_32KHZ_XTAL		0x8
+#define	TIMROT_TIMCTRL3_SELECT_8KHZ_XTAL		0x9
+#define	TIMROT_TIMCTRL3_SELECT_4KHZ_XTAL		0xa
+#define	TIMROT_TIMCTRL3_SELECT_1KHZ_XTAL		0xb
+#define	TIMROT_TIMCTRL3_SELECT_TICK_ALWAYS		0xc
+#define	TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_MASK	(0xffff << 16)
+#define	TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_OFFSET	16
+#define	TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_MASK	0xffff
+#define	TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_OFFSET	0
+#endif
+
+#define	TIMROT_VERSION_MAJOR_MASK			(0xff << 24)
+#define	TIMROT_VERSION_MAJOR_OFFSET			24
+#define	TIMROT_VERSION_MINOR_MASK			(0xff << 16)
+#define	TIMROT_VERSION_MINOR_OFFSET			16
+#define	TIMROT_VERSION_STEP_MASK			0xffff
+#define	TIMROT_VERSION_STEP_OFFSET			0
+
+#endif /* __MX28_REGS_TIMROT_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-uartapp.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-uartapp.h
new file mode 100644
index 000000000..d89cf27b6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-uartapp.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale MXS UARTAPP Register Definitions
+ *
+ * Copyright (C) 2013 Andreas Wass <andreas.wass@dalelven.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __ARCH_ARM___MXS_UARTAPP_H
+#define __ARCH_ARM___MXS_UARTAPP_H
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mxs_uartapp_regs {
+	mxs_reg_32(hw_uartapp_ctrl0)
+	mxs_reg_32(hw_uartapp_ctrl1)
+	mxs_reg_32(hw_uartapp_ctrl2)
+	mxs_reg_32(hw_uartapp_linectrl)
+	mxs_reg_32(hw_uartapp_linectrl2)
+	mxs_reg_32(hw_uartapp_intr)
+	mxs_reg_32(hw_uartapp_data)
+	mxs_reg_32(hw_uartapp_stat)
+	mxs_reg_32(hw_uartapp_debug)
+	mxs_reg_32(hw_uartapp_version)
+	mxs_reg_32(hw_uartapp_autobaud)
+};
+#endif
+
+#define UARTAPP_CTRL0_SFTRST_MASK				(1 << 31)
+#define UARTAPP_CTRL0_CLKGATE_MASK			(1 << 30)
+#define UARTAPP_CTRL0_RUN_MASK				(1 << 29)
+#define UARTAPP_CTRL0_RX_SOURCE_MASK			(1 << 28)
+#define UARTAPP_CTRL0_RXTO_ENABLE_MASK			(1 << 27)
+#define UARTAPP_CTRL0_RXTIMEOUT_OFFSET			16
+#define UARTAPP_CTRL0_RXTIMEOUT_MASK			(0x7FF << 16)
+#define UARTAPP_CTRL0_XFER_COUNT_OFFSET			0
+#define UARTAPP_CTRL0_XFER_COUNT_MASK			0xFFFF
+
+#define UARTAPP_CTRL1_RUN_MASK				(1 << 28)
+
+#define UARTAPP_CTRL1_XFER_COUNT_OFFSET			0
+#define UARTAPP_CTRL1_XFER_COUNT_MASK			0xFFFF
+
+#define UARTAPP_CTRL2_INVERT_RTS_MASK			(1 << 31)
+#define UARTAPP_CTRL2_INVERT_CTS_MASK			(1 << 30)
+#define UARTAPP_CTRL2_INVERT_TX_MASK			(1 << 29)
+#define UARTAPP_CTRL2_INVERT_RX_MASK			(1 << 28)
+#define UARTAPP_CTRL2_RTS_SEMAPHORE_MASK			(1 << 27)
+#define UARTAPP_CTRL2_DMAONERR_MASK			(1 << 26)
+#define UARTAPP_CTRL2_TXDMAE_MASK				(1 << 25)
+#define UARTAPP_CTRL2_RXDMAE_MASK				(1 << 24)
+#define UARTAPP_CTRL2_RXIFLSEL_OFFSET			20
+#define UARTAPP_CTRL2_RXIFLSEL_MASK			(0x7 << 20)
+
+#define UARTAPP_CTRL2_RXIFLSEL_NOT_EMPTY		(0x0 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_ONE_QUARTER		(0x1 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_ONE_HALF		(0x2 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_THREE_QUARTERS		(0x3 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_SEVEN_EIGHTHS		(0x4 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID5		(0x5 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID6		(0x6 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID7		(0x7 << 20)
+#define UARTAPP_CTRL2_TXIFLSEL_OFFSET			16
+#define UARTAPP_CTRL2_TXIFLSEL_MASK			(0x7 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_EMPTY			(0x0 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_ONE_QUARTER		(0x1 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_ONE_HALF		(0x2 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_THREE_QUARTERS		(0x3 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_SEVEN_EIGHTHS		(0x4 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID5		(0x5 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID6		(0x6 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID7		(0x7 << 16)
+#define UARTAPP_CTRL2_CTSEN_MASK				(1 << 15)
+#define UARTAPP_CTRL2_RTSEN_MASK				(1 << 14)
+#define UARTAPP_CTRL2_OUT2_MASK				(1 << 13)
+#define UARTAPP_CTRL2_OUT1_MASK				(1 << 12)
+#define UARTAPP_CTRL2_RTS_MASK				(1 << 11)
+#define UARTAPP_CTRL2_DTR_MASK				(1 << 10)
+#define UARTAPP_CTRL2_RXE_MASK				(1 << 9)
+#define UARTAPP_CTRL2_TXE_MASK				(1 << 8)
+#define UARTAPP_CTRL2_LBE_MASK				(1 << 7)
+#define UARTAPP_CTRL2_USE_LCR2_MASK			(1 << 6)
+
+#define UARTAPP_CTRL2_SIRLP_MASK				(1 << 2)
+#define UARTAPP_CTRL2_SIREN_MASK				(1 << 1)
+#define UARTAPP_CTRL2_UARTEN_MASK				0x01
+
+#define UARTAPP_LINECTRL_BAUD_DIVINT_OFFSET			16
+#define UARTAPP_LINECTRL_BAUD_DIVINT_MASK			(0xFFFF << 16)
+#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVINT_OFFSET		6
+
+#define UARTAPP_LINECTRL_BAUD_DIVFRAC_OFFSET		8
+#define UARTAPP_LINECTRL_BAUD_DIVFRAC_MASK		(0x3F << 8)
+#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVFRAC_MASK	0x3F
+
+#define UARTAPP_LINECTRL_SPS_MASK				(1 << 7)
+#define UARTAPP_LINECTRL_WLEN_OFFSET			5
+#define UARTAPP_LINECTRL_WLEN_MASK			(0x03 << 5)
+#define UARTAPP_LINECTRL_WLEN_5BITS			(0x00 << 5)
+#define UARTAPP_LINECTRL_WLEN_6BITS			(0x01 << 5)
+#define UARTAPP_LINECTRL_WLEN_7BITS			(0x02 << 5)
+#define UARTAPP_LINECTRL_WLEN_8BITS			(0x03 << 5)
+
+#define UARTAPP_LINECTRL_FEN_MASK				(1 << 4)
+#define UARTAPP_LINECTRL_STP2_MASK			(1 << 3)
+#define UARTAPP_LINECTRL_EPS_MASK				(1 << 2)
+#define UARTAPP_LINECTRL_PEN_MASK				(1 << 1)
+#define UARTAPP_LINECTRL_BRK_MASK				1
+
+#define UARTAPP_LINECTRL2_BAUD_DIVINT_OFFSET		16
+#define UARTAPP_LINECTRL2_BAUD_DIVINT_MASK		(0xFFFF << 16)
+#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVINT_OFFSET	6
+
+#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_OFFSET		8
+#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_MASK		(0x3F << 8)
+#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVFRAC_MASK	0x3F
+
+#define UARTAPP_LINECTRL2_SPS_MASK			(1 << 7)
+#define UARTAPP_LINECTRL2_WLEN_OFFSET			5
+#define UARTAPP_LINECTRL2_WLEN_MASK			(0x03 << 5)
+#define UARTAPP_LINECTRL2_WLEN_5BITS			(0x00 << 5)
+#define UARTAPP_LINECTRL2_WLEN_6BITS			(0x01 << 5)
+#define UARTAPP_LINECTRL2_WLEN_7BITS			(0x02 << 5)
+#define UARTAPP_LINECTRL2_WLEN_8BITS			(0x03 << 5)
+
+#define UARTAPP_LINECTRL2_FEN_MASK			(1 << 4)
+#define UARTAPP_LINECTRL2_STP2_MASK			(1 << 3)
+#define UARTAPP_LINECTRL2_EPS_MASK			(1 << 2)
+#define UARTAPP_LINECTRL2_PEN_MASK			(1 << 1)
+
+#define UARTAPP_INTR_ABDIEN_MASK				(1 << 27)
+#define UARTAPP_INTR_OEIEN_MASK				(1 << 26)
+#define UARTAPP_INTR_BEIEN_MASK				(1 << 25)
+#define UARTAPP_INTR_PEIEN_MASK				(1 << 24)
+#define UARTAPP_INTR_FEIEN_MASK				(1 << 23)
+#define UARTAPP_INTR_RTIEN_MASK				(1 << 22)
+#define UARTAPP_INTR_TXIEN_MASK				(1 << 21)
+#define UARTAPP_INTR_RXIEN_MASK				(1 << 20)
+#define UARTAPP_INTR_DSRMIEN_MASK				(1 << 19)
+#define UARTAPP_INTR_DCDMIEN_MASK				(1 << 18)
+#define UARTAPP_INTR_CTSMIEN_MASK				(1 << 17)
+#define UARTAPP_INTR_RIMIEN_MASK				(1 << 16)
+
+#define UARTAPP_INTR_ABDIS_MASK				(1 << 11)
+#define UARTAPP_INTR_OEIS_MASK				(1 << 10)
+#define UARTAPP_INTR_BEIS_MASK				(1 << 9)
+#define UARTAPP_INTR_PEIS_MASK				(1 << 8)
+#define UARTAPP_INTR_FEIS_MASK				(1 << 7)
+#define UARTAPP_INTR_RTIS_MASK				(1 << 6)
+#define UARTAPP_INTR_TXIS_MASK				(1 << 5)
+#define UARTAPP_INTR_RXIS_MASK				(1 << 4)
+#define UARTAPP_INTR_DSRMIS_MASK				(1 << 3)
+#define UARTAPP_INTR_DCDMIS_MASK				(1 << 2)
+#define UARTAPP_INTR_CTSMIS_MASK				(1 << 1)
+#define UARTAPP_INTR_RIMIS_MASK				0x1
+
+#define UARTAPP_DATA_DATA_OFFSET				0
+#define UARTAPP_DATA_DATA_MASK				0xFFFFFFFF
+#define UARTAPP_STAT_PRESENT_MASK				(1 << 31)
+#define UARTAPP_STAT_PRESENT_UNAVAILABLE		(0x0 << 31)
+#define UARTAPP_STAT_PRESENT_AVAILABLE			(0x1 << 31)
+
+#define UARTAPP_STAT_HISPEED_MASK				(1 << 30)
+#define UARTAPP_STAT_HISPEED_UNAVAILABLE		(0x0 << 30)
+#define UARTAPP_STAT_HISPEED_AVAILABLE			(0x1 << 30)
+
+#define UARTAPP_STAT_BUSY_MASK				(1 << 29)
+#define UARTAPP_STAT_CTS_MASK				(1 << 28)
+#define UARTAPP_STAT_TXFE_MASK				(1 << 27)
+#define UARTAPP_STAT_RXFF_MASK				(1 << 26)
+#define UARTAPP_STAT_TXFF_MASK				(1 << 25)
+#define UARTAPP_STAT_RXFE_MASK				(1 << 24)
+#define UARTAPP_STAT_RXBYTE_INVALID_OFFSET			20
+#define UARTAPP_STAT_RXBYTE_INVALID_MASK		(0xF << 20)
+
+#define UARTAPP_STAT_OERR_MASK				(1 << 19)
+#define UARTAPP_STAT_BERR_MASK				(1 << 18)
+#define UARTAPP_STAT_PERR_MASK				(1 << 17)
+#define UARTAPP_STAT_FERR_MASK				(1 << 16)
+#define UARTAPP_STAT_RXCOUNT_OFFSET				0
+#define UARTAPP_STAT_RXCOUNT_MASK				0xFFFF
+
+#define UARTAPP_DEBUG_RXIBAUD_DIV_OFFSET			16
+#define UARTAPP_DEBUG_RXIBAUD_DIV_MASK				(0xFFFF << 16)
+
+#define UARTAPP_DEBUG_RXFBAUD_DIV_OFFSET			10
+#define UARTAPP_DEBUG_RXFBAUD_DIV_MASK				(0x3F << 10)
+
+#define UARTAPP_DEBUG_TXDMARUN_MASK			(1 << 5)
+#define UARTAPP_DEBUG_RXDMARUN_MASK			(1 << 4)
+#define UARTAPP_DEBUG_TXCMDEND_MASK			(1 << 3)
+#define UARTAPP_DEBUG_RXCMDEND_MASK			(1 << 2)
+#define UARTAPP_DEBUG_TXDMARQ_MASK			(1 << 1)
+#define UARTAPP_DEBUG_RXDMARQ_MASK			0x01
+
+#define UARTAPP_VERSION_MAJOR_OFFSET			24
+#define UARTAPP_VERSION_MAJOR_MASK			(0xFF << 24)
+
+#define UARTAPP_VERSION_MINOR_OFFSET			16
+#define UARTAPP_VERSION_MINOR_MASK			(0xFF << 16)
+
+#define UARTAPP_VERSION_STEP_OFFSET				0
+#define UARTAPP_VERSION_STEP_MASK				0xFFFF
+
+#define UARTAPP_AUTOBAUD_REFCHAR1_OFFSET			24
+#define UARTAPP_AUTOBAUD_REFCHAR1_MASK				(0xFF << 24)
+
+#define UARTAPP_AUTOBAUD_REFCHAR0_OFFSET			16
+#define UARTAPP_AUTOBAUD_REFCHAR0_MASK				(0xFF << 16)
+
+#define UARTAPP_AUTOBAUD_UPDATE_TX_MASK			(1 << 4)
+#define UARTAPP_AUTOBAUD_TWO_REF_CHARS_MASK		(1 << 3)
+#define UARTAPP_AUTOBAUD_START_WITH_RUNBIT_MASK		(1 << 2)
+#define UARTAPP_AUTOBAUD_START_BAUD_DETECT_MASK		(1 << 1)
+#define UARTAPP_AUTOBAUD_BAUD_DETECT_ENABLE_MASK		0x01
+#endif /* __ARCH_ARM___UARTAPP_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-usb.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-usb.h
new file mode 100644
index 000000000..8d5168dd8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-usb.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 USB OTG Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef __REGS_USB_H__
+#define __REGS_USB_H__
+
+struct mxs_usb_regs {
+	uint32_t		hw_usbctrl_id;			/* 0x000 */
+	uint32_t		hw_usbctrl_hwgeneral;		/* 0x004 */
+	uint32_t		hw_usbctrl_hwhost;		/* 0x008 */
+	uint32_t		hw_usbctrl_hwdevice;		/* 0x00c */
+	uint32_t		hw_usbctrl_hwtxbuf;		/* 0x010 */
+	uint32_t		hw_usbctrl_hwrxbuf;		/* 0x014 */
+
+	uint32_t		reserved1[26];
+
+	uint32_t		hw_usbctrl_gptimer0ld;		/* 0x080 */
+	uint32_t		hw_usbctrl_gptimer0ctrl;	/* 0x084 */
+	uint32_t		hw_usbctrl_gptimer1ld;		/* 0x088 */
+	uint32_t		hw_usbctrl_gptimer1ctrl;	/* 0x08c */
+	uint32_t		hw_usbctrl_sbuscfg;		/* 0x090 */
+
+	uint32_t		reserved2[27];
+
+	uint32_t		hw_usbctrl_caplength;		/* 0x100 */
+	uint32_t		hw_usbctrl_hcsparams;		/* 0x104 */
+	uint32_t		hw_usbctrl_hccparams;		/* 0x108 */
+
+	uint32_t		reserved3[5];
+
+	uint32_t		hw_usbctrl_dciversion;		/* 0x120 */
+	uint32_t		hw_usbctrl_dccparams;		/* 0x124 */
+
+	uint32_t		reserved4[6];
+
+	uint32_t		hw_usbctrl_usbcmd;		/* 0x140 */
+	uint32_t		hw_usbctrl_usbsts;		/* 0x144 */
+	uint32_t		hw_usbctrl_usbintr;		/* 0x148 */
+	uint32_t		hw_usbctrl_frindex;		/* 0x14c */
+
+	uint32_t		reserved5;
+
+	union {
+		uint32_t	hw_usbctrl_periodiclistbase;	/* 0x154 */
+		uint32_t	hw_usbctrl_deviceaddr;		/* 0x154 */
+	};
+	union {
+		uint32_t	hw_usbctrl_asynclistaddr;	/* 0x158 */
+		uint32_t	hw_usbctrl_endpointlistaddr;	/* 0x158 */
+	};
+
+	uint32_t		hw_usbctrl_ttctrl;		/* 0x15c */
+	uint32_t		hw_usbctrl_burstsize;		/* 0x160 */
+	uint32_t		hw_usbctrl_txfilltuning;	/* 0x164 */
+
+	uint32_t		reserved6;
+
+	uint32_t		hw_usbctrl_ic_usb;		/* 0x16c */
+	uint32_t		hw_usbctrl_ulpi;		/* 0x170 */
+
+	uint32_t		reserved7;
+
+	uint32_t		hw_usbctrl_endptnak;		/* 0x178 */
+	uint32_t		hw_usbctrl_endptnaken;		/* 0x17c */
+
+	uint32_t		reserved8;
+
+	uint32_t		hw_usbctrl_portsc1;		/* 0x184 */
+
+	uint32_t		reserved9[7];
+
+	uint32_t		hw_usbctrl_otgsc;		/* 0x1a4 */
+	uint32_t		hw_usbctrl_usbmode;		/* 0x1a8 */
+	uint32_t		hw_usbctrl_endptsetupstat;	/* 0x1ac */
+	uint32_t		hw_usbctrl_endptprime;		/* 0x1b0 */
+	uint32_t		hw_usbctrl_endptflush;		/* 0x1b4 */
+	uint32_t		hw_usbctrl_endptstat;		/* 0x1b8 */
+	uint32_t		hw_usbctrl_endptcomplete;	/* 0x1bc */
+	uint32_t		hw_usbctrl_endptctrl0;		/* 0x1c0 */
+	uint32_t		hw_usbctrl_endptctrl1;		/* 0x1c4 */
+	uint32_t		hw_usbctrl_endptctrl2;		/* 0x1c8 */
+	uint32_t		hw_usbctrl_endptctrl3;		/* 0x1cc */
+	uint32_t		hw_usbctrl_endptctrl4;		/* 0x1d0 */
+	uint32_t		hw_usbctrl_endptctrl5;		/* 0x1d4 */
+	uint32_t		hw_usbctrl_endptctrl6;		/* 0x1d8 */
+	uint32_t		hw_usbctrl_endptctrl7;		/* 0x1dc */
+};
+
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_MASK		(0x3 << 28)
+
+#define	HW_USBCTRL_ID_CIVERSION_OFFSET		29
+#define	HW_USBCTRL_ID_CIVERSION_MASK		(0x7 << 29)
+#define	HW_USBCTRL_ID_VERSION_OFFSET		25
+#define	HW_USBCTRL_ID_VERSION_MASK		(0xf << 25)
+#define	HW_USBCTRL_ID_REVISION_OFFSET		21
+#define	HW_USBCTRL_ID_REVISION_MASK		(0xf << 21)
+#define	HW_USBCTRL_ID_TAG_OFFSET		16
+#define	HW_USBCTRL_ID_TAG_MASK			(0x1f << 16)
+#define	HW_USBCTRL_ID_NID_OFFSET		8
+#define	HW_USBCTRL_ID_NID_MASK			(0x3f << 8)
+#define	HW_USBCTRL_ID_ID_OFFSET			0
+#define	HW_USBCTRL_ID_ID_MASK			(0x3f << 0)
+
+#define	HW_USBCTRL_HWGENERAL_SM_OFFSET		9
+#define	HW_USBCTRL_HWGENERAL_SM_MASK		(0x3 << 9)
+#define	HW_USBCTRL_HWGENERAL_PHYM_OFFSET	6
+#define	HW_USBCTRL_HWGENERAL_PHYM_MASK		(0x7 << 6)
+#define	HW_USBCTRL_HWGENERAL_PHYW_OFFSET	4
+#define	HW_USBCTRL_HWGENERAL_PHYW_MASK		(0x3 << 4)
+#define	HW_USBCTRL_HWGENERAL_BWT		(1 << 3)
+#define	HW_USBCTRL_HWGENERAL_CLKC_OFFSET	1
+#define	HW_USBCTRL_HWGENERAL_CLKC_MASK		(0x3 << 1)
+#define	HW_USBCTRL_HWGENERAL_RT			(1 << 0)
+
+#define	HW_USBCTRL_HWHOST_TTPER_OFFSET		24
+#define	HW_USBCTRL_HWHOST_TTPER_MASK		(0xff << 24)
+#define	HW_USBCTRL_HWHOST_TTASY_OFFSET		16
+#define	HW_USBCTRL_HWHOST_TTASY_MASK		(0xff << 19)
+#define	HW_USBCTRL_HWHOST_NPORT_OFFSET		1
+#define	HW_USBCTRL_HWHOST_NPORT_MASK		(0x7 << 1)
+#define	HW_USBCTRL_HWHOST_HC			(1 << 0)
+
+#define	HW_USBCTRL_HWDEVICE_DEVEP_OFFSET	1
+#define	HW_USBCTRL_HWDEVICE_DEVEP_MASK		(0x1f << 1)
+#define	HW_USBCTRL_HWDEVICE_DC			(1 << 0)
+
+#define	HW_USBCTRL_HWTXBUF_TXLCR		(1 << 31)
+#define	HW_USBCTRL_HWTXBUF_TXCHANADD_OFFSET	16
+#define	HW_USBCTRL_HWTXBUF_TXCHANADD_MASK	(0xff << 16)
+#define	HW_USBCTRL_HWTXBUF_TXADD_OFFSET		8
+#define	HW_USBCTRL_HWTXBUF_TXADD_MASK		(0xff << 8)
+#define	HW_USBCTRL_HWTXBUF_TXBURST_OFFSET	0
+#define	HW_USBCTRL_HWTXBUF_TXBURST_MASK		0xff
+
+#define	HW_USBCTRL_HWRXBUF_RXADD_OFFSET		8
+#define	HW_USBCTRL_HWRXBUF_RXADD_MASK		(0xff << 8)
+#define	HW_USBCTRL_HWRXBUF_RXBURST_OFFSET	0
+#define	HW_USBCTRL_HWRXBUF_RXBURST_MASK		0xff
+
+#define	HW_USBCTRL_GPTIMERLD_GPTLD_OFFSET	0
+#define	HW_USBCTRL_GPTIMERLD_GPTLD_MASK		0xffffff
+
+#define	HW_USBCTRL_GPTIMERCTRL_GPTRUN		(1 << 31)
+#define	HW_USBCTRL_GPTIMERCTRL_GPTRST		(1 << 30)
+#define	HW_USBCTRL_GPTIMERCTRL_GPTMODE		(1 << 24)
+#define	HW_USBCTRL_GPTIMERCTRL_GPTCNT_OFFSET	0
+#define	HW_USBCTRL_GPTIMERCTRL_GPTCNT_MASK	0xffffff
+
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_OFFSET	0
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_MASK	0x7
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR	0x0
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR4	0x1
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR8	0x2
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR16	0x3
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR4	0x5
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR8	0x6
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR16	0x7
+
+#endif	/* __REGS_USB_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-usbphy.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-usbphy.h
new file mode 100644
index 000000000..643feab74
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/regs-usbphy.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 USB PHY Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef __REGS_USBPHY_H__
+#define __REGS_USBPHY_H__
+
+struct mxs_usbphy_regs {
+	mxs_reg_32(hw_usbphy_pwd)
+	mxs_reg_32(hw_usbphy_tx)
+	mxs_reg_32(hw_usbphy_rx)
+	mxs_reg_32(hw_usbphy_ctrl)
+	mxs_reg_32(hw_usbphy_status)
+	mxs_reg_32(hw_usbphy_debug)
+	mxs_reg_32(hw_usbphy_debug0_status)
+	mxs_reg_32(hw_usbphy_debug1)
+	mxs_reg_32(hw_usbphy_version)
+	mxs_reg_32(hw_usbphy_ip)
+};
+
+#define	USBPHY_PWD_RXPWDRX				(1 << 20)
+#define	USBPHY_PWD_RXPWDDIFF				(1 << 19)
+#define	USBPHY_PWD_RXPWD1PT1				(1 << 18)
+#define	USBPHY_PWD_RXPWDENV				(1 << 17)
+#define	USBPHY_PWD_TXPWDV2I				(1 << 12)
+#define	USBPHY_PWD_TXPWDIBIAS				(1 << 11)
+#define	USBPHY_PWD_TXPWDFS				(1 << 10)
+
+#define	USBPHY_TX_USBPHY_TX_EDGECTRL_OFFSET		26
+#define	USBPHY_TX_USBPHY_TX_EDGECTRL_MASK		(0x7 << 26)
+#define	USBPHY_TX_USBPHY_TX_SYNC_INVERT			(1 << 25)
+#define	USBPHY_TX_USBPHY_TX_SYNC_MUX			(1 << 24)
+#define	USBPHY_TX_TXENCAL45DP				(1 << 21)
+#define	USBPHY_TX_TXCAL45DP_OFFSET			16
+#define	USBPHY_TX_TXCAL45DP_MASK			(0xf << 16)
+#define	USBPHY_TX_TXENCAL45DM				(1 << 13)
+#define	USBPHY_TX_TXCAL45DM_OFFSET			8
+#define	USBPHY_TX_TXCAL45DM_MASK			(0xf << 8)
+#define	USBPHY_TX_D_CAL_OFFSET				0
+#define	USBPHY_TX_D_CAL_MASK				0xf
+
+#define	USBPHY_RX_RXDBYPASS				(1 << 22)
+#define	USBPHY_RX_DISCONADJ_OFFSET			4
+#define	USBPHY_RX_DISCONADJ_MASK			(0x7 << 4)
+#define	USBPHY_RX_ENVADJ_OFFSET				0
+#define	USBPHY_RX_ENVADJ_MASK				0x7
+
+#define	USBPHY_CTRL_SFTRST				(1 << 31)
+#define	USBPHY_CTRL_CLKGATE				(1 << 30)
+#define	USBPHY_CTRL_UTMI_SUSPENDM			(1 << 29)
+#define	USBPHY_CTRL_HOST_FORCE_LS_SE0			(1 << 28)
+#define	USBPHY_CTRL_ENAUTOSET_USBCLKS			(1 << 26)
+#define	USBPHY_CTRL_ENAUTOCLR_USBCLKGATE		(1 << 25)
+#define	USBPHY_CTRL_FSDLL_RST_EN			(1 << 24)
+#define	USBPHY_CTRL_ENVBUSCHG_WKUP			(1 << 23)
+#define	USBPHY_CTRL_ENIDCHG_WKUP			(1 << 22)
+#define	USBPHY_CTRL_ENDPDMCHG_WKUP			(1 << 21)
+#define	USBPHY_CTRL_ENAUTOCLR_PHY_PWD			(1 << 20)
+#define	USBPHY_CTRL_ENAUTOCLR_CLKGATE			(1 << 19)
+#define	USBPHY_CTRL_ENAUTO_PWRON_PLL			(1 << 18)
+#define	USBPHY_CTRL_WAKEUP_IRQ				(1 << 17)
+#define	USBPHY_CTRL_ENIRQWAKEUP				(1 << 16)
+#define	USBPHY_CTRL_ENUTMILEVEL3			(1 << 15)
+#define	USBPHY_CTRL_ENUTMILEVEL2			(1 << 14)
+#define	USBPHY_CTRL_DATA_ON_LRADC			(1 << 13)
+#define	USBPHY_CTRL_DEVPLUGIN_IRQ			(1 << 12)
+#define	USBPHY_CTRL_ENIRQDEVPLUGIN			(1 << 11)
+#define	USBPHY_CTRL_RESUME_IRQ				(1 << 10)
+#define	USBPHY_CTRL_ENIRQRESUMEDETECT			(1 << 9)
+#define	USBPHY_CTRL_RESUMEIRQSTICKY			(1 << 8)
+#define	USBPHY_CTRL_ENOTGIDDETECT			(1 << 7)
+#define	USBPHY_CTRL_DEVPLUGIN_POLARITY			(1 << 5)
+#define	USBPHY_CTRL_ENDEVPLUGINDETECT			(1 << 4)
+#define	USBPHY_CTRL_HOSTDISCONDETECT_IRQ		(1 << 3)
+#define	USBPHY_CTRL_ENIRQHOSTDISCON			(1 << 2)
+#define	USBPHY_CTRL_ENHOSTDISCONDETECT			(1 << 1)
+
+#define	USBPHY_STATUS_RESUME_STATUS			(1 << 10)
+#define	USBPHY_STATUS_OTGID_STATUS			(1 << 8)
+#define	USBPHY_STATUS_DEVPLUGIN_STATUS			(1 << 6)
+#define	USBPHY_STATUS_HOSTDISCONDETECT_STATUS		(1 << 3)
+
+#define	USBPHY_DEBUG_CLKGATE				(1 << 30)
+#define	USBPHY_DEBUG_HOST_RESUME_DEBUG			(1 << 29)
+#define	USBPHY_DEBUG_SQUELCHRESETLENGTH_OFFSET		25
+#define	USBPHY_DEBUG_SQUELCHRESETLENGTH_MASK		(0xf << 25)
+#define	USBPHY_DEBUG_ENSQUELCHRESET			(1 << 24)
+#define	USBPHY_DEBUG_SQUELCHRESETCOUNT_OFFSET		16
+#define	USBPHY_DEBUG_SQUELCHRESETCOUNT_MASK		(0x1f << 16)
+#define	USBPHY_DEBUG_ENTX2RXCOUNT			(1 << 12)
+#define	USBPHY_DEBUG_TX2RXCOUNT_OFFSET			8
+#define	USBPHY_DEBUG_TX2RXCOUNT_MASK			(0xf << 8)
+#define	USBPHY_DEBUG_ENHSTPULLDOWN_OFFSET		4
+#define	USBPHY_DEBUG_ENHSTPULLDOWN_MASK			(0x3 << 4)
+#define	USBPHY_DEBUG_HSTPULLDOWN_OFFSET			2
+#define	USBPHY_DEBUG_HSTPULLDOWN_MASK			(0x3 << 2)
+#define	USBPHY_DEBUG_DEBUG_INTERFACE_HOLD		(1 << 1)
+#define	USBPHY_DEBUG_OTGIDPIDLOCK			(1 << 0)
+
+#define	USBPHY_DEBUG0_STATUS_SQUELCH_COUNT_OFFSET	26
+#define	USBPHY_DEBUG0_STATUS_SQUELCH_COUNT_MASK		(0x3f << 26)
+#define	USBPHY_DEBUG0_STATUS_UTMI_RXERROR_OFFSET	16
+#define	USBPHY_DEBUG0_STATUS_UTMI_RXERROR_MASK		(0x3ff << 16)
+#define	USBPHY_DEBUG0_STATUS_LOOP_BACK_OFFSET		0
+#define	USBPHY_DEBUG0_STATUS_LOOP_BACK_MASK		0xffff
+
+#define	USBPHY_DEBUG1_ENTAILADJVD_OFFSET		13
+#define	USBPHY_DEBUG1_ENTAILADJVD_MASK			(0x3 << 13)
+#define	USBPHY_DEBUG1_ENTX2TX				(1 << 12)
+#define	USBPHY_DEBUG1_DBG_ADDRESS_OFFSET		0
+#define	USBPHY_DEBUG1_DBG_ADDRESS_MASK			0xf
+
+#define	USBPHY_VERSION_MAJOR_MASK			(0xff << 24)
+#define	USBPHY_VERSION_MAJOR_OFFSET			24
+#define	USBPHY_VERSION_MINOR_MASK			(0xff << 16)
+#define	USBPHY_VERSION_MINOR_OFFSET			16
+#define	USBPHY_VERSION_STEP_MASK			0xffff
+#define	USBPHY_VERSION_STEP_OFFSET			0
+
+#define	USBPHY_IP_DIV_SEL_OFFSET			23
+#define	USBPHY_IP_DIV_SEL_MASK				(0x3 << 23)
+#define	USBPHY_IP_LFR_SEL_OFFSET			21
+#define	USBPHY_IP_LFR_SEL_MASK				(0x3 << 21)
+#define	USBPHY_IP_CP_SEL_OFFSET				19
+#define	USBPHY_IP_CP_SEL_MASK				(0x3 << 19)
+#define	USBPHY_IP_TSTI_TX_DP				(1 << 18)
+#define	USBPHY_IP_TSTI_TX_DM				(1 << 17)
+#define	USBPHY_IP_ANALOG_TESTMODE			(1 << 16)
+#define	USBPHY_IP_EN_USB_CLKS				(1 << 2)
+#define	USBPHY_IP_PLL_LOCKED				(1 << 1)
+#define	USBPHY_IP_PLL_POWER				(1 << 0)
+
+#endif	/* __REGS_USBPHY_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-mxs/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-mxs/sys_proto.h
new file mode 100644
index 000000000..20ee863ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-mxs/sys_proto.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX23/i.MX28 specific functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef __MXS_SYS_PROTO_H__
+#define __MXS_SYS_PROTO_H__
+
+#include <asm/mach-imx/sys_proto.h>
+
+int mxsmmc_initialize(struct bd_info *bis, int id, int (*wp)(int),
+		      int (*cd)(int));
+
+#ifdef CONFIG_SPL_BUILD
+
+#if defined(CONFIG_MX23)
+#include <asm/arch/iomux-mx23.h>
+#elif defined(CONFIG_MX28)
+#include <asm/arch/iomux-mx28.h>
+#endif
+
+void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
+			 const iomux_cfg_t *iomux_setup,
+			 const unsigned int iomux_size);
+
+void mxs_power_switch_dcdc_clocksource(uint32_t freqsel);
+#endif
+
+struct mxs_pair {
+	uint8_t	boot_pads;
+	uint8_t boot_mask;
+	const char *mode;
+};
+
+static const struct mxs_pair mxs_boot_modes[] = {
+#if defined(CONFIG_MX23)
+	{ 0x00, 0x0f, "USB" },
+	{ 0x01, 0x1f, "I2C, master" },
+	{ 0x02, 0x1f, "SSP SPI #1, master, NOR" },
+	{ 0x03, 0x1f, "SSP SPI #2, master, NOR" },
+	{ 0x04, 0x1f, "NAND" },
+	{ 0x06, 0x1f, "JTAG" },
+	{ 0x08, 0x1f, "SSP SPI #3, master, EEPROM" },
+	{ 0x09, 0x1f, "SSP SD/MMC #0" },
+	{ 0x0a, 0x1f, "SSP SD/MMC #1" },
+	{ 0x00, 0x00, "Reserved/Unknown/Wrong" },
+#elif defined(CONFIG_MX28)
+	{ 0x00, 0x0f, "USB #0" },
+	{ 0x01, 0x1f, "I2C #0, master, 3V3" },
+	{ 0x11, 0x1f, "I2C #0, master, 1V8" },
+	{ 0x02, 0x1f, "SSP SPI #2, master, 3V3 NOR" },
+	{ 0x12, 0x1f, "SSP SPI #2, master, 1V8 NOR" },
+	{ 0x03, 0x1f, "SSP SPI #3, master, 3V3 NOR" },
+	{ 0x13, 0x1f, "SSP SPI #3, master, 1V8 NOR" },
+	{ 0x04, 0x1f, "NAND, 3V3" },
+	{ 0x14, 0x1f, "NAND, 1V8" },
+	{ 0x06, 0x1f, "JTAG" },
+	{ 0x08, 0x1f, "SSP SPI #3, master, 3V3 EEPROM" },
+	{ 0x18, 0x1f, "SSP SPI #3, master, 1V8 EEPROM" },
+	{ 0x09, 0x1f, "SSP SD/MMC #0, 3V3" },
+	{ 0x19, 0x1f, "SSP SD/MMC #0, 1V8" },
+	{ 0x0a, 0x1f, "SSP SD/MMC #1, 3V3" },
+	{ 0x1a, 0x1f, "SSP SD/MMC #1, 1V8" },
+	{ 0x00, 0x00, "Reserved/Unknown/Wrong" },
+#endif
+};
+
+#define MXS_BM_USB			0x00
+#define MXS_BM_I2C_MASTER_3V3		0x01
+#define MXS_BM_I2C_MASTER_1V8		0x11
+#define MXS_BM_SPI2_MASTER_3V3_NOR	0x02
+#define MXS_BM_SPI2_MASTER_1V8_NOR	0x12
+#define MXS_BM_SPI3_MASTER_3V3_NOR	0x03
+#define MXS_BM_SPI3_MASTER_1V8_NOR	0x13
+#define MXS_BM_NAND_3V3			0x04
+#define MXS_BM_NAND_1V8			0x14
+#define MXS_BM_JTAG			0x06
+#define MXS_BM_SPI3_MASTER_3V3_EEPROM	0x08
+#define MXS_BM_SPI3_MASTER_1V8_EEPROM	0x18
+#define MXS_BM_SDMMC0_3V3		0x09
+#define MXS_BM_SDMMC0_1V8		0x19
+#define MXS_BM_SDMMC1_3V3		0x0a
+#define MXS_BM_SDMMC1_1V8		0x1a
+
+#define MXS_SPL_DATA ((struct mxs_spl_data *)(CONFIG_SYS_TEXT_BASE - 0x200))
+
+struct mxs_spl_data {
+	uint8_t		boot_mode_idx;
+	uint32_t	mem_dram_size;
+};
+
+int mxs_dram_init(void);
+
+#endif	/* __SYS_PROTO_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx/board.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx/board.h
new file mode 100644
index 000000000..c9fc3993f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx/board.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <asm/arch/soc.h>
+
+#define MAX_LMAC_PER_BGX 4
+#define LMAC_CNT MAX_LMAC_PER_BGX
+
+#if defined(CONFIG_TARGET_OCTEONTX_81XX)
+
+/** Maximum number of BGX interfaces per CPU node */
+#define MAX_BGX_PER_NODE	3
+#define OCTEONTX_XCV	/* RGMII Interface */
+
+#elif defined(CONFIG_TARGET_OCTEONTX_83XX)
+
+/** Maximum number of BGX interfaces per CPU node */
+#define MAX_BGX_PER_NODE	4
+
+#endif
+
+/** Reg offsets */
+#define RST_BOOT	0x87E006001600ULL
+
+/** Structure definitions */
+
+/**
+ * Register (RSL) rst_boot
+ *
+ * RST Boot Register This register is not accessible through ROM scripts;
+ * see SCR_WRITE32_S[ADDR].
+ */
+union rst_boot {
+	u64 u;
+	struct rst_boot_s {
+		u64 rboot_pin                        : 1;
+		u64 rboot                            : 1;
+		u64 reserved_2_32                    : 31;
+		u64 pnr_mul                          : 6;
+		u64 reserved_39                      : 1;
+		u64 c_mul                            : 7;
+		u64 reserved_47_52                   : 6;
+		u64 gpio_ejtag                       : 1;
+		u64 mcp_jtagdis                      : 1;
+		u64 dis_scan                         : 1;
+		u64 dis_huk                          : 1;
+		u64 vrm_err                          : 1;
+		u64 jt_tstmode                       : 1;
+		u64 ckill_ppdis                      : 1;
+		u64 trusted_mode                     : 1;
+		u64 reserved_61_62                   : 2;
+		u64 chipkill                         : 1;
+	} s;
+	struct rst_boot_cn81xx {
+		u64 rboot_pin                        : 1;
+		u64 rboot                            : 1;
+		u64 lboot                            : 10;
+		u64 lboot_ext23                      : 6;
+		u64 lboot_ext45                      : 6;
+		u64 lboot_jtg                        : 1;
+		u64 lboot_ckill                      : 1;
+		u64 reserved_26_29                   : 4;
+		u64 lboot_oci                        : 3;
+		u64 pnr_mul                          : 6;
+		u64 reserved_39                      : 1;
+		u64 c_mul                            : 7;
+		u64 reserved_47_54                   : 8;
+		u64 dis_scan                         : 1;
+		u64 dis_huk                          : 1;
+		u64 vrm_err                          : 1;
+		u64 jt_tstmode                       : 1;
+		u64 ckill_ppdis                      : 1;
+		u64 trusted_mode                     : 1;
+		u64 ejtagdis                         : 1;
+		u64 jtcsrdis                         : 1;
+		u64 chipkill                         : 1;
+	} cn81xx;
+	struct rst_boot_cn83xx {
+		u64 rboot_pin                        : 1;
+		u64 rboot                            : 1;
+		u64 lboot                            : 10;
+		u64 lboot_ext23                      : 6;
+		u64 lboot_ext45                      : 6;
+		u64 lboot_jtg                        : 1;
+		u64 lboot_ckill                      : 1;
+		u64 lboot_pf_flr                     : 4;
+		u64 lboot_oci                        : 3;
+		u64 pnr_mul                          : 6;
+		u64 reserved_39                      : 1;
+		u64 c_mul                            : 7;
+		u64 reserved_47_54                   : 8;
+		u64 dis_scan                         : 1;
+		u64 dis_huk                          : 1;
+		u64 vrm_err                          : 1;
+		u64 jt_tstmode                       : 1;
+		u64 ckill_ppdis                      : 1;
+		u64 trusted_mode                     : 1;
+		u64 ejtagdis                         : 1;
+		u64 jtcsrdis                         : 1;
+		u64 chipkill                         : 1;
+	} cn83xx;
+};
+
+extern unsigned long fdt_base_addr;
+
+/** Function definitions */
+void mem_map_fill(void);
+int octeontx_board_has_pmp(void);
+const char *fdt_get_board_model(void);
+const char *fdt_get_board_serial(void);
+const char *fdt_get_board_revision(void);
+void fdt_parse_phy_info(void);
+void fdt_board_get_ethaddr(int bgx, int lmac, unsigned char *eth);
+void bgx_set_board_info(int bgx_id, int *mdio_bus, int *phy_addr,
+			bool *autoneg_dis, bool *lmac_reg, bool *lmac_enable);
+#endif /* __BOARD_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx/clock.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx/clock.h
new file mode 100644
index 000000000..7bf600a1f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx/clock.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+/** System PLL reference clock */
+#define PLL_REF_CLK                     50000000        /* 50 MHz */
+#define NS_PER_REF_CLK_TICK             (1000000000 / PLL_REF_CLK)
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void);
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void);
+
+#endif /* __CLOCK_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx/csrs/csrs-mio_emm.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx/csrs/csrs-mio_emm.h
new file mode 100644
index 000000000..a5a474083
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx/csrs/csrs-mio_emm.h
@@ -0,0 +1,1193 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_MIO_EMM_H__
+#define __CSRS_MIO_EMM_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * MIO_EMM.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Enumeration mio_emm_bar_e
+ *
+ * eMMC Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8_SIZE 0x800000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9_SIZE 0x10000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4 (0x87e009f00000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration mio_emm_int_vec_e
+ *
+ * eMMC MSI-X Vector Enumeration Enumerates the MSI-X interrupt vectors.
+ */
+#define MIO_EMM_INT_VEC_E_DMA_INT_DONE (8)
+#define MIO_EMM_INT_VEC_E_DMA_INT_FIFO (7)
+#define MIO_EMM_INT_VEC_E_EMM_BUF_DONE (0)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_DONE (1)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_ERR (3)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_DONE (2)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_ERR (4)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_DONE (5)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_ERR (6)
+#define MIO_EMM_INT_VEC_E_NCB_FLT (9)
+#define MIO_EMM_INT_VEC_E_NCB_RAS (0xa)
+
+/**
+ * Register (RSL) mio_emm_access_wdog
+ *
+ * eMMC Access Watchdog Register
+ */
+union mio_emm_access_wdog {
+	u64 u;
+	struct mio_emm_access_wdog_s {
+		u64 clk_cnt                          : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct mio_emm_access_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+{
+	return 0x20f0;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_dat
+ *
+ * eMMC Data Buffer Access Register
+ */
+union mio_emm_buf_dat {
+	u64 u;
+	struct mio_emm_buf_dat_s {
+		u64 dat                              : 64;
+	} s;
+	/* struct mio_emm_buf_dat_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_DAT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_DAT(void)
+{
+	return 0x20e8;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_idx
+ *
+ * eMMC Data Buffer Address Register
+ */
+union mio_emm_buf_idx {
+	u64 u;
+	struct mio_emm_buf_idx_s {
+		u64 offset                           : 6;
+		u64 buf_num                          : 1;
+		u64 reserved_7_15                    : 9;
+		u64 inc                              : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct mio_emm_buf_idx_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_IDX(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_IDX(void)
+{
+	return 0x20e0;
+}
+
+/**
+ * Register (RSL) mio_emm_calb
+ *
+ * eMMC Calbration Register This register initiates delay line
+ * characterization.
+ */
+union mio_emm_calb {
+	u64 u;
+	struct mio_emm_calb_s {
+		u64 start                            : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct mio_emm_calb_s cn; */
+};
+
+static inline u64 MIO_EMM_CALB(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CALB(void)
+{
+	return 0x20c0;
+}
+
+/**
+ * Register (RSL) mio_emm_cfg
+ *
+ * eMMC Configuration Register
+ */
+union mio_emm_cfg {
+	u64 u;
+	struct mio_emm_cfg_s {
+		u64 bus_ena                          : 4;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct mio_emm_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CFG(void)
+{
+	return 0x2000;
+}
+
+/**
+ * Register (RSL) mio_emm_cmd
+ *
+ * eMMC Command Register
+ */
+union mio_emm_cmd {
+	u64 u;
+	struct mio_emm_cmd_s {
+		u64 arg                              : 32;
+		u64 cmd_idx                          : 6;
+		u64 rtype_xor                        : 3;
+		u64 ctype_xor                        : 2;
+		u64 reserved_43_48                   : 6;
+		u64 offset                           : 6;
+		u64 dbuf                             : 1;
+		u64 reserved_56_58                   : 3;
+		u64 cmd_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 skip_busy                        : 1;
+		u64 reserved_63                      : 1;
+	} s;
+	/* struct mio_emm_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_CMD(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CMD(void)
+{
+	return 0x2058;
+}
+
+/**
+ * Register (RSL) mio_emm_comp
+ *
+ * eMMC Compensation Register
+ */
+union mio_emm_comp {
+	u64 u;
+	struct mio_emm_comp_s {
+		u64 nctl                             : 3;
+		u64 reserved_3_7                     : 5;
+		u64 pctl                             : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct mio_emm_comp_s cn; */
+};
+
+static inline u64 MIO_EMM_COMP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_COMP(void)
+{
+	return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_debug
+ *
+ * eMMC Debug Register
+ */
+union mio_emm_debug {
+	u64 u;
+	struct mio_emm_debug_s {
+		u64 clk_on                           : 1;
+		u64 reserved_1_7                     : 7;
+		u64 cmd_sm                           : 4;
+		u64 data_sm                          : 4;
+		u64 dma_sm                           : 4;
+		u64 emmc_clk_disable                 : 1;
+		u64 rdsync_rst                       : 1;
+		u64 reserved_22_63                   : 42;
+	} s;
+	struct mio_emm_debug_cn96xxp1 {
+		u64 clk_on                           : 1;
+		u64 reserved_1_7                     : 7;
+		u64 cmd_sm                           : 4;
+		u64 data_sm                          : 4;
+		u64 dma_sm                           : 4;
+		u64 reserved_20_63                   : 44;
+	} cn96xxp1;
+	/* struct mio_emm_debug_s cn96xxp3; */
+	/* struct mio_emm_debug_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 MIO_EMM_DEBUG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DEBUG(void)
+{
+	return 0x20f8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma
+ *
+ * eMMC External DMA Configuration Register
+ */
+union mio_emm_dma {
+	u64 u;
+	struct mio_emm_dma_s {
+		u64 card_addr                        : 32;
+		u64 block_cnt                        : 16;
+		u64 multi                            : 1;
+		u64 rw                               : 1;
+		u64 rel_wr                           : 1;
+		u64 thres                            : 6;
+		u64 dat_null                         : 1;
+		u64 sector                           : 1;
+		u64 dma_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 skip_busy                        : 1;
+		u64 extra_args                       : 1;
+	} s;
+	struct mio_emm_dma_cn8 {
+		u64 card_addr                        : 32;
+		u64 block_cnt                        : 16;
+		u64 multi                            : 1;
+		u64 rw                               : 1;
+		u64 rel_wr                           : 1;
+		u64 thres                            : 6;
+		u64 dat_null                         : 1;
+		u64 sector                           : 1;
+		u64 dma_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 skip_busy                        : 1;
+		u64 reserved_63                      : 1;
+	} cn8;
+	struct mio_emm_dma_cn9 {
+		u64 card_addr                        : 32;
+		u64 block_cnt                        : 16;
+		u64 multi                            : 1;
+		u64 rw                               : 1;
+		u64 reserved_50                      : 1;
+		u64 thres                            : 6;
+		u64 dat_null                         : 1;
+		u64 sector                           : 1;
+		u64 dma_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 skip_busy                        : 1;
+		u64 extra_args                       : 1;
+	} cn9;
+};
+
+static inline u64 MIO_EMM_DMA(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA(void)
+{
+	return 0x2050;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_adr
+ *
+ * eMMC DMA Address Register This register sets the address for eMMC/SD
+ * flash transfers to/from memory. Sixty-four-bit operations must be used
+ * to access this register. This register is updated by the DMA hardware
+ * and can be reloaded by the values placed in the MIO_EMM_DMA_FIFO_ADR.
+ */
+union mio_emm_dma_adr {
+	u64 u;
+	struct mio_emm_dma_adr_s {
+		u64 adr                              : 53;
+		u64 reserved_53_63                   : 11;
+	} s;
+	struct mio_emm_dma_adr_cn8 {
+		u64 adr                              : 49;
+		u64 reserved_49_63                   : 15;
+	} cn8;
+	/* struct mio_emm_dma_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_ADR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ADR(void)
+{
+	return 0x188;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_arg
+ *
+ * eMMC External DMA Extra Arguments Register
+ */
+union mio_emm_dma_arg {
+	u64 u;
+	struct mio_emm_dma_arg_s {
+		u64 cmd23_args                       : 8;
+		u64 force_pgm                        : 1;
+		u64 context_id                       : 4;
+		u64 tag_req                          : 1;
+		u64 pack_cmd                         : 1;
+		u64 rel_wr                           : 1;
+		u64 alt_cmd                          : 6;
+		u64 skip_blk_cmd                     : 1;
+		u64 reserved_23_31                   : 9;
+		u64 alt_cmd_arg                      : 32;
+	} s;
+	/* struct mio_emm_dma_arg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_ARG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ARG(void)
+{
+	return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_cfg
+ *
+ * eMMC DMA Configuration Register This register controls the internal
+ * DMA engine used with the eMMC/SD flash controller. Sixty- four-bit
+ * operations must be used to access this register. This register is
+ * updated by the hardware DMA engine and can also be reloaded by writes
+ * to the MIO_EMM_DMA_FIFO_CMD register.
+ */
+union mio_emm_dma_cfg {
+	u64 u;
+	struct mio_emm_dma_cfg_s {
+		u64 reserved_0_35                    : 36;
+		u64 size                             : 20;
+		u64 endian                           : 1;
+		u64 swap8                            : 1;
+		u64 swap16                           : 1;
+		u64 swap32                           : 1;
+		u64 reserved_60                      : 1;
+		u64 clr                              : 1;
+		u64 rw                               : 1;
+		u64 en                               : 1;
+	} s;
+	/* struct mio_emm_dma_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_CFG(void)
+{
+	return 0x180;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_adr
+ *
+ * eMMC Internal DMA FIFO Address Register This register specifies the
+ * internal address that is loaded into the eMMC internal DMA FIFO. The
+ * FIFO is used to queue up operations for the
+ * MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR when the DMA completes successfully.
+ */
+union mio_emm_dma_fifo_adr {
+	u64 u;
+	struct mio_emm_dma_fifo_adr_s {
+		u64 reserved_0_2                     : 3;
+		u64 adr                              : 50;
+		u64 reserved_53_63                   : 11;
+	} s;
+	struct mio_emm_dma_fifo_adr_cn8 {
+		u64 reserved_0_2                     : 3;
+		u64 adr                              : 46;
+		u64 reserved_49_63                   : 15;
+	} cn8;
+	/* struct mio_emm_dma_fifo_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+{
+	return 0x170;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cfg
+ *
+ * eMMC Internal DMA FIFO Configuration Register This register controls
+ * DMA FIFO operations.
+ */
+union mio_emm_dma_fifo_cfg {
+	u64 u;
+	struct mio_emm_dma_fifo_cfg_s {
+		u64 count                            : 5;
+		u64 reserved_5_7                     : 3;
+		u64 int_lvl                          : 5;
+		u64 reserved_13_15                   : 3;
+		u64 clr                              : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct mio_emm_dma_fifo_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+{
+	return 0x160;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cmd
+ *
+ * eMMC Internal DMA FIFO Command Register This register specifies a
+ * command that is loaded into the eMMC internal DMA FIFO.  The FIFO is
+ * used to queue up operations for the MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR
+ * when the DMA completes successfully. Writes to this register store
+ * both the MIO_EMM_DMA_FIFO_CMD and the MIO_EMM_DMA_FIFO_ADR contents
+ * into the FIFO and increment the MIO_EMM_DMA_FIFO_CFG[COUNT] field.
+ * Note: This register has a similar format to MIO_EMM_DMA_CFG with the
+ * exception that the EN and CLR fields are absent. These are supported
+ * in MIO_EMM_DMA_FIFO_CFG.
+ */
+union mio_emm_dma_fifo_cmd {
+	u64 u;
+	struct mio_emm_dma_fifo_cmd_s {
+		u64 reserved_0_35                    : 36;
+		u64 size                             : 20;
+		u64 endian                           : 1;
+		u64 swap8                            : 1;
+		u64 swap16                           : 1;
+		u64 swap32                           : 1;
+		u64 intdis                           : 1;
+		u64 reserved_61                      : 1;
+		u64 rw                               : 1;
+		u64 reserved_63                      : 1;
+	} s;
+	/* struct mio_emm_dma_fifo_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+{
+	return 0x178;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int
+ *
+ * eMMC DMA Interrupt Register Sixty-four-bit operations must be used to
+ * access this register.
+ */
+union mio_emm_dma_int {
+	u64 u;
+	struct mio_emm_dma_int_s {
+		u64 done                             : 1;
+		u64 fifo                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct mio_emm_dma_int_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT(void)
+{
+	return 0x190;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1c
+ *
+ * eMMC DMA Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union mio_emm_dma_int_ena_w1c {
+	u64 u;
+	struct mio_emm_dma_int_ena_w1c_s {
+		u64 done                             : 1;
+		u64 fifo                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct mio_emm_dma_int_ena_w1c_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+{
+	return 0x1a8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1s
+ *
+ * eMMC DMA Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union mio_emm_dma_int_ena_w1s {
+	u64 u;
+	struct mio_emm_dma_int_ena_w1s_s {
+		u64 done                             : 1;
+		u64 fifo                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct mio_emm_dma_int_ena_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+{
+	return 0x1a0;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_w1s
+ *
+ * eMMC DMA Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_dma_int_w1s {
+	u64 u;
+	struct mio_emm_dma_int_w1s_s {
+		u64 done                             : 1;
+		u64 fifo                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct mio_emm_dma_int_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+{
+	return 0x198;
+}
+
+/**
+ * Register (RSL) mio_emm_int
+ *
+ * eMMC Interrupt Register
+ */
+union mio_emm_int {
+	u64 u;
+	struct mio_emm_int_s {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 ncb_flt                          : 1;
+		u64 ncb_ras                          : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	struct mio_emm_int_cn8 {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 reserved_7_63                    : 57;
+	} cn8;
+	/* struct mio_emm_int_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT(void)
+{
+	return 0x2078;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1c
+ *
+ * eMMC Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union mio_emm_int_ena_w1c {
+	u64 u;
+	struct mio_emm_int_ena_w1c_s {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 ncb_flt                          : 1;
+		u64 ncb_ras                          : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	struct mio_emm_int_ena_w1c_cn8 {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 reserved_7_63                    : 57;
+	} cn8;
+	/* struct mio_emm_int_ena_w1c_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+{
+	return 0x20b8;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1s
+ *
+ * eMMC Interrupt Enable Set Register This register sets interrupt enable
+ * bits.
+ */
+union mio_emm_int_ena_w1s {
+	u64 u;
+	struct mio_emm_int_ena_w1s_s {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 ncb_flt                          : 1;
+		u64 ncb_ras                          : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	struct mio_emm_int_ena_w1s_cn8 {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 reserved_7_63                    : 57;
+	} cn8;
+	/* struct mio_emm_int_ena_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+{
+	return 0x20b0;
+}
+
+/**
+ * Register (RSL) mio_emm_int_w1s
+ *
+ * eMMC Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_int_w1s {
+	u64 u;
+	struct mio_emm_int_w1s_s {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 ncb_flt                          : 1;
+		u64 ncb_ras                          : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	struct mio_emm_int_w1s_cn8 {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 reserved_7_63                    : 57;
+	} cn8;
+	/* struct mio_emm_int_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_W1S(void)
+{
+	return 0x2080;
+}
+
+/**
+ * Register (RSL) mio_emm_io_ctl
+ *
+ * eMMC I/O Control Register
+ */
+union mio_emm_io_ctl {
+	u64 u;
+	struct mio_emm_io_ctl_s {
+		u64 slew                             : 1;
+		u64 reserved_1                       : 1;
+		u64 drive                            : 2;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct mio_emm_io_ctl_s cn; */
+};
+
+static inline u64 MIO_EMM_IO_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_IO_CTL(void)
+{
+	return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_mode#
+ *
+ * eMMC Operating Mode Register
+ */
+union mio_emm_modex {
+	u64 u;
+	struct mio_emm_modex_s {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 clk_swap                         : 1;
+		u64 reserved_37_39                   : 3;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 hs200_timing                     : 1;
+		u64 hs400_timing                     : 1;
+		u64 reserved_51_63                   : 13;
+	} s;
+	struct mio_emm_modex_cn8 {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 reserved_36_39                   : 4;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 reserved_49_63                   : 15;
+	} cn8;
+	struct mio_emm_modex_cn96xxp1 {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 reserved_36_39                   : 4;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 hs200_timing                     : 1;
+		u64 hs400_timing                     : 1;
+		u64 reserved_51_63                   : 13;
+	} cn96xxp1;
+	/* struct mio_emm_modex_s cn96xxp3; */
+	/* struct mio_emm_modex_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_MODEX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MODEX(u64 a)
+{
+	return 0x2008 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_pba#
+ *
+ * eMMC MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table; the bit number is indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_pbax {
+	u64 u;
+	struct mio_emm_msix_pbax_s {
+		u64 pend                             : 64;
+	} s;
+	/* struct mio_emm_msix_pbax_s cn; */
+};
+
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+{
+	return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_addr
+ *
+ * eMMC MSI-X Vector-Table Address Register This register is the MSI-X
+ * vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_addr {
+	u64 u;
+	struct mio_emm_msix_vecx_addr_s {
+		u64 secvec                           : 1;
+		u64 reserved_1                       : 1;
+		u64 addr                             : 51;
+		u64 reserved_53_63                   : 11;
+	} s;
+	struct mio_emm_msix_vecx_addr_cn8 {
+		u64 secvec                           : 1;
+		u64 reserved_1                       : 1;
+		u64 addr                             : 47;
+		u64 reserved_49_63                   : 15;
+	} cn8;
+	/* struct mio_emm_msix_vecx_addr_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+{
+	return 0 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_ctl
+ *
+ * eMMC MSI-X Vector-Table Control and Data Register This register is the
+ * MSI-X vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_ctl {
+	u64 u;
+	struct mio_emm_msix_vecx_ctl_s {
+		u64 data                             : 32;
+		u64 mask                             : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	struct mio_emm_msix_vecx_ctl_cn8 {
+		u64 data                             : 20;
+		u64 reserved_20_31                   : 12;
+		u64 mask                             : 1;
+		u64 reserved_33_63                   : 31;
+	} cn8;
+	/* struct mio_emm_msix_vecx_ctl_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+{
+	return 8 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_rca
+ *
+ * eMMC Relative Card Address Register
+ */
+union mio_emm_rca {
+	u64 u;
+	struct mio_emm_rca_s {
+		u64 card_rca                         : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct mio_emm_rca_s cn; */
+};
+
+static inline u64 MIO_EMM_RCA(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RCA(void)
+{
+	return 0x20a0;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_hi
+ *
+ * eMMC Response Data High Register
+ */
+union mio_emm_rsp_hi {
+	u64 u;
+	struct mio_emm_rsp_hi_s {
+		u64 dat                              : 64;
+	} s;
+	/* struct mio_emm_rsp_hi_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_HI(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_HI(void)
+{
+	return 0x2070;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_lo
+ *
+ * eMMC Response Data Low Register
+ */
+union mio_emm_rsp_lo {
+	u64 u;
+	struct mio_emm_rsp_lo_s {
+		u64 dat                              : 64;
+	} s;
+	/* struct mio_emm_rsp_lo_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_LO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_LO(void)
+{
+	return 0x2068;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_sts
+ *
+ * eMMC Response Status Register
+ */
+union mio_emm_rsp_sts {
+	u64 u;
+	struct mio_emm_rsp_sts_s {
+		u64 cmd_done                         : 1;
+		u64 cmd_idx                          : 6;
+		u64 cmd_type                         : 2;
+		u64 rsp_type                         : 3;
+		u64 rsp_val                          : 1;
+		u64 rsp_bad_sts                      : 1;
+		u64 rsp_crc_err                      : 1;
+		u64 rsp_timeout                      : 1;
+		u64 stp_val                          : 1;
+		u64 stp_bad_sts                      : 1;
+		u64 stp_crc_err                      : 1;
+		u64 stp_timeout                      : 1;
+		u64 rsp_busybit                      : 1;
+		u64 blk_crc_err                      : 1;
+		u64 blk_timeout                      : 1;
+		u64 dbuf                             : 1;
+		u64 reserved_24_27                   : 4;
+		u64 dbuf_err                         : 1;
+		u64 reserved_29_54                   : 26;
+		u64 acc_timeout                      : 1;
+		u64 dma_pend                         : 1;
+		u64 dma_val                          : 1;
+		u64 switch_val                       : 1;
+		u64 cmd_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 reserved_62_63                   : 2;
+	} s;
+	/* struct mio_emm_rsp_sts_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_STS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_STS(void)
+{
+	return 0x2060;
+}
+
+/**
+ * Register (RSL) mio_emm_sample
+ *
+ * eMMC Sampling Register
+ */
+union mio_emm_sample {
+	u64 u;
+	struct mio_emm_sample_s {
+		u64 dat_cnt                          : 10;
+		u64 reserved_10_15                   : 6;
+		u64 cmd_cnt                          : 10;
+		u64 reserved_26_63                   : 38;
+	} s;
+	/* struct mio_emm_sample_s cn; */
+};
+
+static inline u64 MIO_EMM_SAMPLE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SAMPLE(void)
+{
+	return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_sts_mask
+ *
+ * eMMC Status Mask Register
+ */
+union mio_emm_sts_mask {
+	u64 u;
+	struct mio_emm_sts_mask_s {
+		u64 sts_msk                          : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct mio_emm_sts_mask_s cn; */
+};
+
+static inline u64 MIO_EMM_STS_MASK(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_STS_MASK(void)
+{
+	return 0x2098;
+}
+
+/**
+ * Register (RSL) mio_emm_switch
+ *
+ * eMMC Operating Mode Switch Register This register allows software to
+ * change eMMC related parameters associated with a specific BUS_ID.  The
+ * MIO_EMM_MODE() registers contain the current setting for each BUS.
+ * This register is also used to switch the [CLK_HI] and [CLK_LO]
+ * settings associated with the common EMMC_CLK.  These settings can only
+ * be changed when [BUS_ID] = 0.
+ */
+union mio_emm_switch {
+	u64 u;
+	struct mio_emm_switch_s {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 clk_swap                         : 1;
+		u64 reserved_37_39                   : 3;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 hs200_timing                     : 1;
+		u64 hs400_timing                     : 1;
+		u64 reserved_51_55                   : 5;
+		u64 switch_err2                      : 1;
+		u64 switch_err1                      : 1;
+		u64 switch_err0                      : 1;
+		u64 switch_exe                       : 1;
+		u64 bus_id                           : 2;
+		u64 reserved_62_63                   : 2;
+	} s;
+	struct mio_emm_switch_cn8 {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 reserved_36_39                   : 4;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 reserved_49_55                   : 7;
+		u64 switch_err2                      : 1;
+		u64 switch_err1                      : 1;
+		u64 switch_err0                      : 1;
+		u64 switch_exe                       : 1;
+		u64 bus_id                           : 2;
+		u64 reserved_62_63                   : 2;
+	} cn8;
+	struct mio_emm_switch_cn96xxp1 {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 reserved_36_39                   : 4;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 hs200_timing                     : 1;
+		u64 hs400_timing                     : 1;
+		u64 reserved_51_55                   : 5;
+		u64 switch_err2                      : 1;
+		u64 switch_err1                      : 1;
+		u64 switch_err0                      : 1;
+		u64 switch_exe                       : 1;
+		u64 bus_id                           : 2;
+		u64 reserved_62_63                   : 2;
+	} cn96xxp1;
+	/* struct mio_emm_switch_s cn96xxp3; */
+	/* struct mio_emm_switch_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_SWITCH(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SWITCH(void)
+{
+	return 0x2048;
+}
+
+/**
+ * Register (RSL) mio_emm_tap
+ *
+ * eMMC TAP Delay Register This register indicates the delay line
+ * characteristics.
+ */
+union mio_emm_tap {
+	u64 u;
+	struct mio_emm_tap_s {
+		u64 delay                            : 8;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct mio_emm_tap_s cn; */
+};
+
+static inline u64 MIO_EMM_TAP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TAP(void)
+{
+	return 0x20c8;
+}
+
+/**
+ * Register (RSL) mio_emm_timing
+ *
+ * eMMC Timing Register This register determines the number of tap delays
+ * the EMM_DAT, EMM_DS, and EMM_CMD lines are transmitted or received in
+ * relation to EMM_CLK. These values should only be changed when the eMMC
+ * bus is idle.
+ */
+union mio_emm_timing {
+	u64 u;
+	struct mio_emm_timing_s {
+		u64 data_out_tap                     : 6;
+		u64 reserved_6_15                    : 10;
+		u64 data_in_tap                      : 6;
+		u64 reserved_22_31                   : 10;
+		u64 cmd_out_tap                      : 6;
+		u64 reserved_38_47                   : 10;
+		u64 cmd_in_tap                       : 6;
+		u64 reserved_54_63                   : 10;
+	} s;
+	/* struct mio_emm_timing_s cn; */
+};
+
+static inline u64 MIO_EMM_TIMING(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TIMING(void)
+{
+	return 0x20d0;
+}
+
+/**
+ * Register (RSL) mio_emm_wdog
+ *
+ * eMMC Watchdog Register
+ */
+union mio_emm_wdog {
+	u64 u;
+	struct mio_emm_wdog_s {
+		u64 clk_cnt                          : 26;
+		u64 reserved_26_63                   : 38;
+	} s;
+	/* struct mio_emm_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_WDOG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_WDOG(void)
+{
+	return 0x2088;
+}
+
+#endif /* __CSRS_MIO_EMM_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx/csrs/csrs-xcv.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx/csrs/csrs-xcv.h
new file mode 100644
index 000000000..159f58ace
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx/csrs/csrs-xcv.h
@@ -0,0 +1,428 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_XCV_H__
+#define __CSRS_XCV_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * XCV.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Enumeration xcv_bar_e
+ *
+ * XCV Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define XCV_BAR_E_XCVX_PF_BAR0(a) (0x87e0db000000ll + 0ll * (a))
+#define XCV_BAR_E_XCVX_PF_BAR0_SIZE 0x100000ull
+#define XCV_BAR_E_XCVX_PF_BAR4(a) (0x87e0dbf00000ll + 0ll * (a))
+#define XCV_BAR_E_XCVX_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration xcv_int_vec_e
+ *
+ * XCV MSI-X Vector Enumeration Enumerates the MSI-X interrupt vectors.
+ */
+#define XCV_INT_VEC_E_INT (0)
+
+/**
+ * Register (RSL) xcv#_batch_crd_ret
+ *
+ * XCV Batch Credit Return Register
+ */
+union xcvx_batch_crd_ret {
+	u64 u;
+	struct xcvx_batch_crd_ret_s {
+		u64 crd_ret                          : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct xcvx_batch_crd_ret_s cn; */
+};
+
+static inline u64 XCVX_BATCH_CRD_RET(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_BATCH_CRD_RET(u64 a)
+{
+	return 0x100 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_comp_ctl
+ *
+ * XCV Compensation Controller Register This register controls
+ * programmable compensation.
+ */
+union xcvx_comp_ctl {
+	u64 u;
+	struct xcvx_comp_ctl_s {
+		u64 nctl_sat                         : 1;
+		u64 reserved_1_26                    : 26;
+		u64 nctl_lock                        : 1;
+		u64 reserved_28                      : 1;
+		u64 pctl_sat                         : 1;
+		u64 pctl_lock                        : 1;
+		u64 reserved_31                      : 1;
+		u64 drv_nctl                         : 5;
+		u64 reserved_37_39                   : 3;
+		u64 drv_pctl                         : 5;
+		u64 reserved_45_47                   : 3;
+		u64 cmp_nctl                         : 5;
+		u64 reserved_53_55                   : 3;
+		u64 cmp_pctl                         : 5;
+		u64 reserved_61_62                   : 2;
+		u64 drv_byp                          : 1;
+	} s;
+	/* struct xcvx_comp_ctl_s cn; */
+};
+
+static inline u64 XCVX_COMP_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_COMP_CTL(u64 a)
+{
+	return 0x20 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_ctl
+ *
+ * XCV Control Register This register contains the status control bits.
+ */
+union xcvx_ctl {
+	u64 u;
+	struct xcvx_ctl_s {
+		u64 speed                            : 2;
+		u64 lpbk_int                         : 1;
+		u64 lpbk_ext                         : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct xcvx_ctl_s cn; */
+};
+
+static inline u64 XCVX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_CTL(u64 a)
+{
+	return 0x30 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_dll_ctl
+ *
+ * XCV DLL Controller Register The RGMII timing specification requires
+ * that devices transmit clock and data synchronously. The specification
+ * requires external sources (namely the PC board trace routes) to
+ * introduce the appropriate 1.5 to 2.0 ns of delay.  To eliminate the
+ * need for the PC board delays, the RGMII interface has optional on-
+ * board DLLs for both transmit and receive. For correct operation, at
+ * most one of the transmitter, board, or receiver involved in an RGMII
+ * link should introduce delay. By default/reset, the RGMII receivers
+ * delay the received clock, and the RGMII transmitters do not delay the
+ * transmitted clock. Whether this default works as-is with a given link
+ * partner depends on the behavior of the link partner and the PC board.
+ * These are the possible modes of RGMII receive operation:  *
+ * XCV()_DLL_CTL[CLKRX_BYP] = 0 (reset value) - The RGMII receive
+ * interface introduces clock delay using its internal DLL. This mode is
+ * appropriate if neither the remote transmitter nor the PC board delays
+ * the clock.  * XCV()_DLL_CTL[CLKRX_BYP] = 1, [CLKRX_SET] = 0x0 - The
+ * RGMII receive interface introduces no clock delay. This mode is
+ * appropriate if either the remote transmitter or the PC board delays
+ * the clock.  These are the possible modes of RGMII transmit operation:
+ * * XCV()_DLL_CTL[CLKTX_BYP] = 1, [CLKTX_SET] = 0x0 (reset value) - The
+ * RGMII transmit interface introduces no clock delay. This mode is
+ * appropriate is either the remote receiver or the PC board delays the
+ * clock.  * XCV()_DLL_CTL[CLKTX_BYP] = 0 - The RGMII transmit interface
+ * introduces clock delay using its internal DLL. This mode is
+ * appropriate if neither the remote receiver nor the PC board delays the
+ * clock.
+ */
+union xcvx_dll_ctl {
+	u64 u;
+	struct xcvx_dll_ctl_s {
+		u64 refclk_sel                       : 2;
+		u64 reserved_2_7                     : 6;
+		u64 clktx_set                        : 7;
+		u64 clktx_byp                        : 1;
+		u64 clkrx_set                        : 7;
+		u64 clkrx_byp                        : 1;
+		u64 clk_set                          : 7;
+		u64 lock                             : 1;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct xcvx_dll_ctl_s cn; */
+};
+
+static inline u64 XCVX_DLL_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_DLL_CTL(u64 a)
+{
+	return 0x10 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_eco
+ *
+ * INTERNAL: XCV ECO Register
+ */
+union xcvx_eco {
+	u64 u;
+	struct xcvx_eco_s {
+		u64 eco_rw                           : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct xcvx_eco_s cn; */
+};
+
+static inline u64 XCVX_ECO(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_ECO(u64 a)
+{
+	return 0x200 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_inbnd_status
+ *
+ * XCV Inband Status Register This register contains RGMII inband status.
+ */
+union xcvx_inbnd_status {
+	u64 u;
+	struct xcvx_inbnd_status_s {
+		u64 link                             : 1;
+		u64 speed                            : 2;
+		u64 duplex                           : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct xcvx_inbnd_status_s cn; */
+};
+
+static inline u64 XCVX_INBND_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_INBND_STATUS(u64 a)
+{
+	return 0x80 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int
+ *
+ * XCV Interrupt Register This register flags error for TX FIFO overflow,
+ * TX FIFO underflow and incomplete byte for 10/100 Mode. It also flags
+ * status change for link duplex, link speed and link up/down.
+ */
+union xcvx_int {
+	u64 u;
+	struct xcvx_int_s {
+		u64 link                             : 1;
+		u64 speed                            : 1;
+		u64 reserved_2                       : 1;
+		u64 duplex                           : 1;
+		u64 incomp_byte                      : 1;
+		u64 tx_undflw                        : 1;
+		u64 tx_ovrflw                        : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct xcvx_int_s cn; */
+};
+
+static inline u64 XCVX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT(u64 a)
+{
+	return 0x40 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_ena_w1c
+ *
+ * Loopback Error Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union xcvx_int_ena_w1c {
+	u64 u;
+	struct xcvx_int_ena_w1c_s {
+		u64 link                             : 1;
+		u64 speed                            : 1;
+		u64 reserved_2                       : 1;
+		u64 duplex                           : 1;
+		u64 incomp_byte                      : 1;
+		u64 tx_undflw                        : 1;
+		u64 tx_ovrflw                        : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct xcvx_int_ena_w1c_s cn; */
+};
+
+static inline u64 XCVX_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_ENA_W1C(u64 a)
+{
+	return 0x50 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_ena_w1s
+ *
+ * Loopback Error Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union xcvx_int_ena_w1s {
+	u64 u;
+	struct xcvx_int_ena_w1s_s {
+		u64 link                             : 1;
+		u64 speed                            : 1;
+		u64 reserved_2                       : 1;
+		u64 duplex                           : 1;
+		u64 incomp_byte                      : 1;
+		u64 tx_undflw                        : 1;
+		u64 tx_ovrflw                        : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct xcvx_int_ena_w1s_s cn; */
+};
+
+static inline u64 XCVX_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_ENA_W1S(u64 a)
+{
+	return 0x58 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_w1s
+ *
+ * Loopback Error Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union xcvx_int_w1s {
+	u64 u;
+	struct xcvx_int_w1s_s {
+		u64 link                             : 1;
+		u64 speed                            : 1;
+		u64 reserved_2                       : 1;
+		u64 duplex                           : 1;
+		u64 incomp_byte                      : 1;
+		u64 tx_undflw                        : 1;
+		u64 tx_ovrflw                        : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct xcvx_int_w1s_s cn; */
+};
+
+static inline u64 XCVX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_W1S(u64 a)
+{
+	return 0x48 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_msix_pba#
+ *
+ * XCV MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table; the bit number is indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_pbax {
+	u64 u;
+	struct xcvx_msix_pbax_s {
+		u64 pend                             : 64;
+	} s;
+	/* struct xcvx_msix_pbax_s cn; */
+};
+
+static inline u64 XCVX_MSIX_PBAX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_PBAX(u64 a, u64 b)
+{
+	return 0xf0000 + 0 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) xcv#_msix_vec#_addr
+ *
+ * XCV MSI-X Vector-Table Address Register This register is the MSI-X
+ * vector table, indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_vecx_addr {
+	u64 u;
+	struct xcvx_msix_vecx_addr_s {
+		u64 secvec                           : 1;
+		u64 reserved_1                       : 1;
+		u64 addr                             : 47;
+		u64 reserved_49_63                   : 15;
+	} s;
+	/* struct xcvx_msix_vecx_addr_s cn; */
+};
+
+static inline u64 XCVX_MSIX_VECX_ADDR(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_VECX_ADDR(u64 a, u64 b)
+{
+	return 0 + 0 * a + 0x10 * b;
+}
+
+/**
+ * Register (RSL) xcv#_msix_vec#_ctl
+ *
+ * XCV MSI-X Vector-Table Control and Data Register This register is the
+ * MSI-X vector table, indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_vecx_ctl {
+	u64 u;
+	struct xcvx_msix_vecx_ctl_s {
+		u64 data                             : 20;
+		u64 reserved_20_31                   : 12;
+		u64 mask                             : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct xcvx_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 XCVX_MSIX_VECX_CTL(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_VECX_CTL(u64 a, u64 b)
+{
+	return 8 + 0 * a + 0x10 * b;
+}
+
+/**
+ * Register (RSL) xcv#_reset
+ *
+ * XCV Reset Registers This register controls reset.
+ */
+union xcvx_reset {
+	u64 u;
+	struct xcvx_reset_s {
+		u64 rx_dat_rst_n                     : 1;
+		u64 rx_pkt_rst_n                     : 1;
+		u64 tx_dat_rst_n                     : 1;
+		u64 tx_pkt_rst_n                     : 1;
+		u64 reserved_4_6                     : 3;
+		u64 comp                             : 1;
+		u64 reserved_8_10                    : 3;
+		u64 dllrst                           : 1;
+		u64 reserved_12_14                   : 3;
+		u64 clkrst                           : 1;
+		u64 reserved_16_62                   : 47;
+		u64 enable                           : 1;
+	} s;
+	/* struct xcvx_reset_s cn; */
+};
+
+static inline u64 XCVX_RESET(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 XCVX_RESET(u64 a)
+{
+	return 0 + 0 * a;
+}
+
+#endif /* __CSRS_XCV_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx/gpio.h
new file mode 100644
index 000000000..3943ffd95
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx/gpio.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx/smc.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx/smc.h
new file mode 100644
index 000000000..beff4d158
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx/smc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SMC_H__
+#define __SMC_H__
+
+/* OcteonTX Service Calls version numbers */
+#define OCTEONTX_VERSION_MAJOR	0x1
+#define OCTEONTX_VERSION_MINOR	0x0
+
+/* x1 - node number */
+#define OCTEONTX_DRAM_SIZE	0xc2000301
+
+ssize_t smc_dram_size(unsigned int node);
+
+#endif /* __SMC_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx/soc.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx/soc.h
new file mode 100644
index 000000000..dc081c70b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx/soc.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SOC_H__
+#define __SOC_H__
+
+/* Product PARTNUM */
+#define CN81XX	0xA2
+#define CN83XX	0xA3
+#define CN96XX	0xB2
+#define CN95XX	0xB3
+
+#define otx_is_altpkg()	read_alt_pkg()
+#define otx_is_soc(soc)	(read_partnum() == (soc))
+#define otx_is_board(model) (!strcmp(read_board_name(), model))
+#define otx_is_platform(platform) (read_platform() == (platform))
+
+enum platform {
+	PLATFORM_HW = 0,
+	PLATFORM_EMULATOR = 1,
+	PLATFORM_ASIM = 3,
+};
+
+int read_platform(void);
+u8 read_partnum(void);
+const char *read_board_name(void);
+bool read_alt_pkg(void);
+
+#endif /* __SOC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/board.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/board.h
new file mode 100644
index 000000000..1c9ec113c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/board.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <asm/arch/soc.h>
+
+/** Reg offsets */
+#define RST_BOOT		0x87E006001600ULL
+
+#define CPC_BOOT_OWNERX(a)	0x86D000000160ULL + (8 * (a))
+
+/** Structure definitions */
+/**
+ * Register (NCB32b) cpc_boot_owner#
+ *
+ * CPC Boot Owner Registers These registers control an external arbiter
+ * for the boot device (SPI/eMMC) across multiple external devices. There
+ * is a register for each requester: _ \<0\> - SCP          - reset on
+ * SCP reset _ \<1\> - MCP          - reset on MCP reset _ \<2\> - AP
+ * Secure    - reset on core reset _ \<3\> - AP Nonsecure - reset on core
+ * reset  These register is only writable to the corresponding
+ * requestor(s) permitted with CPC_PERMIT.
+ */
+union cpc_boot_ownerx {
+	u32 u;
+	struct cpc_boot_ownerx_s {
+		u32 boot_req		: 1;
+		u32 reserved_1_7	: 7;
+		u32 boot_wait		: 1;
+		u32 reserved_9_31	: 23;
+	} s;
+};
+
+/**
+ * Register (RSL) rst_boot
+ *
+ * RST Boot Register This register is not accessible through ROM scripts;
+ * see SCR_WRITE32_S[ADDR].
+ */
+union rst_boot {
+	u64 u;
+	struct rst_boot_s {
+		u64 rboot_pin                        : 1;
+		u64 rboot                            : 1;
+		u64 reserved_2_32                    : 31;
+		u64 pnr_mul                          : 6;
+		u64 reserved_39                      : 1;
+		u64 c_mul                            : 7;
+		u64 reserved_47_52                   : 6;
+		u64 gpio_ejtag                       : 1;
+		u64 mcp_jtagdis                      : 1;
+		u64 dis_scan                         : 1;
+		u64 dis_huk                          : 1;
+		u64 vrm_err                          : 1;
+		u64 jt_tstmode                       : 1;
+		u64 ckill_ppdis                      : 1;
+		u64 trusted_mode                     : 1;
+		u64 reserved_61_62                   : 2;
+		u64 chipkill                         : 1;
+	} s;
+	struct rst_boot_cn96xx {
+		u64 rboot_pin                        : 1;
+		u64 rboot                            : 1;
+		u64 reserved_2_23                    : 22;
+		u64 cpt_mul                          : 7;
+		u64 reserved_31_32                   : 2;
+		u64 pnr_mul                          : 6;
+		u64 reserved_39                      : 1;
+		u64 c_mul                            : 7;
+		u64 reserved_47_52                   : 6;
+		u64 gpio_ejtag                       : 1;
+		u64 mcp_jtagdis                      : 1;
+		u64 dis_scan                         : 1;
+		u64 dis_huk                          : 1;
+		u64 vrm_err                          : 1;
+		u64 reserved_58_59                   : 2;
+		u64 trusted_mode                     : 1;
+		u64 scp_jtagdis                      : 1;
+		u64 jtagdis                          : 1;
+		u64 chipkill                         : 1;
+	} cn96xx;
+	struct rst_boot_cnf95xx {
+		u64 rboot_pin                        : 1;
+		u64 rboot                            : 1;
+		u64 reserved_2_7                     : 6;
+		u64 bphy_mul                         : 7;
+		u64 reserved_15                      : 1;
+		u64 dsp_mul                          : 7;
+		u64 reserved_23                      : 1;
+		u64 cpt_mul                          : 7;
+		u64 reserved_31_32                   : 2;
+		u64 pnr_mul                          : 6;
+		u64 reserved_39                      : 1;
+		u64 c_mul                            : 7;
+		u64 reserved_47_52                   : 6;
+		u64 gpio_ejtag                       : 1;
+		u64 mcp_jtagdis                      : 1;
+		u64 dis_scan                         : 1;
+		u64 dis_huk                          : 1;
+		u64 vrm_err                          : 1;
+		u64 reserved_58_59                   : 2;
+		u64 trusted_mode                     : 1;
+		u64 scp_jtagdis                      : 1;
+		u64 jtagdis                          : 1;
+		u64 chipkill                         : 1;
+	} cnf95xx;
+};
+
+extern unsigned long fdt_base_addr;
+
+/** Function definitions */
+void mem_map_fill(void);
+int fdt_get_board_mac_cnt(void);
+u64 fdt_get_board_mac_addr(void);
+const char *fdt_get_board_model(void);
+const char *fdt_get_board_serial(void);
+const char *fdt_get_board_revision(void);
+void octeontx2_board_get_mac_addr(u8 index, u8 *mac_addr);
+void board_acquire_flash_arb(bool acquire);
+void cgx_intf_shutdown(void);
+
+#endif /* __BOARD_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/clock.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/clock.h
new file mode 100644
index 000000000..7be8852a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/clock.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __CLOCK_H__
+
+/** System PLL reference clock */
+#define PLL_REF_CLK                     50000000        /* 50 MHz */
+#define NS_PER_REF_CLK_TICK             (1000000000 / PLL_REF_CLK)
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void);
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void);
+
+#endif /* __CLOCK_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-cgx.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-cgx.h
new file mode 100644
index 000000000..34e7db3da
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-cgx.h
@@ -0,0 +1,7851 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_CGX_H__
+#define __CSRS_CGX_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * CGX.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Enumeration cgx_bar_e
+ *
+ * CGX Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define CGX_BAR_E_CGXX_PF_BAR0(a) (0x87e0e0000000ll + 0x1000000ll * (a))
+#define CGX_BAR_E_CGXX_PF_BAR0_SIZE 0x100000ull
+#define CGX_BAR_E_CGXX_PF_BAR4(a) (0x87e0e0400000ll + 0x1000000ll * (a))
+#define CGX_BAR_E_CGXX_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration cgx_int_vec_e
+ *
+ * CGX MSI-X Vector Enumeration Enumeration the MSI-X interrupt vectors.
+ */
+#define CGX_INT_VEC_E_CMRX_INT(a) (0 + 9 * (a))
+#define CGX_INT_VEC_E_CMRX_SW(a) (0x26 + (a))
+#define CGX_INT_VEC_E_CMR_MEM_INT (0x24)
+#define CGX_INT_VEC_E_GMPX_GMI_RX_INT(a) (5 + 9 * (a))
+#define CGX_INT_VEC_E_GMPX_GMI_TX_INT(a) (6 + 9 * (a))
+#define CGX_INT_VEC_E_GMPX_GMI_WOL_INT(a) (7 + 9 * (a))
+#define CGX_INT_VEC_E_GMPX_PCS_INT(a) (4 + 9 * (a))
+#define CGX_INT_VEC_E_SMUX_RX_INT(a) (2 + 9 * (a))
+#define CGX_INT_VEC_E_SMUX_RX_WOL_INT(a) (8 + 9 * (a))
+#define CGX_INT_VEC_E_SMUX_TX_INT(a) (3 + 9 * (a))
+#define CGX_INT_VEC_E_SPUX_INT(a) (1 + 9 * (a))
+#define CGX_INT_VEC_E_SW (0x25)
+
+/**
+ * Enumeration cgx_lmac_types_e
+ *
+ * CGX LMAC Type Enumeration Enumerates the LMAC Types that CGX supports.
+ */
+#define CGX_LMAC_TYPES_E_FIFTYG_R (8)
+#define CGX_LMAC_TYPES_E_FORTYG_R (4)
+#define CGX_LMAC_TYPES_E_HUNDREDG_R (9)
+#define CGX_LMAC_TYPES_E_QSGMII (6)
+#define CGX_LMAC_TYPES_E_RGMII (5)
+#define CGX_LMAC_TYPES_E_RXAUI (2)
+#define CGX_LMAC_TYPES_E_SGMII (0)
+#define CGX_LMAC_TYPES_E_TENG_R (3)
+#define CGX_LMAC_TYPES_E_TWENTYFIVEG_R (7)
+#define CGX_LMAC_TYPES_E_USXGMII (0xa)
+#define CGX_LMAC_TYPES_E_XAUI (1)
+
+/**
+ * Enumeration cgx_opcode_e
+ *
+ * INTERNAL: CGX Error Opcode Enumeration  Enumerates the error opcodes
+ * created by CGX and presented to NCSI/NIX.
+ */
+#define CGX_OPCODE_E_RE_FCS (7)
+#define CGX_OPCODE_E_RE_FCS_RCV (8)
+#define CGX_OPCODE_E_RE_JABBER (2)
+#define CGX_OPCODE_E_RE_NONE (0)
+#define CGX_OPCODE_E_RE_PARTIAL (1)
+#define CGX_OPCODE_E_RE_RX_CTL (0xb)
+#define CGX_OPCODE_E_RE_SKIP (0xc)
+#define CGX_OPCODE_E_RE_TERMINATE (9)
+
+/**
+ * Enumeration cgx_spu_br_train_cst_e
+ *
+ * INTERNAL: CGX Training Coefficient Status Enumeration  2-bit status
+ * for each coefficient as defined in IEEE 802.3, Table 72-5.
+ */
+#define CGX_SPU_BR_TRAIN_CST_E_MAXIMUM (3)
+#define CGX_SPU_BR_TRAIN_CST_E_MINIMUM (2)
+#define CGX_SPU_BR_TRAIN_CST_E_NOT_UPDATED (0)
+#define CGX_SPU_BR_TRAIN_CST_E_UPDATED (1)
+
+/**
+ * Enumeration cgx_spu_br_train_cup_e
+ *
+ * INTERNAL:CGX Training Coefficient Enumeration  2-bit command for each
+ * coefficient as defined in IEEE 802.3, Table 72-4.
+ */
+#define CGX_SPU_BR_TRAIN_CUP_E_DECREMENT (1)
+#define CGX_SPU_BR_TRAIN_CUP_E_HOLD (0)
+#define CGX_SPU_BR_TRAIN_CUP_E_INCREMENT (2)
+#define CGX_SPU_BR_TRAIN_CUP_E_RSV_CMD (3)
+
+/**
+ * Enumeration cgx_usxgmii_rate_e
+ *
+ * CGX USXGMII Rate Enumeration Enumerates the USXGMII sub-port type
+ * rate, CGX()_SPU()_CONTROL1[USXGMII_RATE].  Selecting a rate higher
+ * than the maximum allowed for a given port sub-type (specified by
+ * CGX()_SPU()_CONTROL1[USXGMII_TYPE]), e.g., selecting ::RATE_2HG (2.5
+ * Gbps) for CGX_USXGMII_TYPE_E::SXGMII_2G, will cause unpredictable
+ * behavior. USXGMII hardware-based autonegotiation may change this
+ * setting.
+ */
+#define CGX_USXGMII_RATE_E_RATE_100M (1)
+#define CGX_USXGMII_RATE_E_RATE_10G (5)
+#define CGX_USXGMII_RATE_E_RATE_10M (0)
+#define CGX_USXGMII_RATE_E_RATE_1G (2)
+#define CGX_USXGMII_RATE_E_RATE_20G (6)
+#define CGX_USXGMII_RATE_E_RATE_2HG (3)
+#define CGX_USXGMII_RATE_E_RATE_5G (4)
+#define CGX_USXGMII_RATE_E_RSV_RATE (7)
+
+/**
+ * Enumeration cgx_usxgmii_type_e
+ *
+ * CGX USXGMII Port Sub-Type Enumeration Enumerates the USXGMII sub-port
+ * type, CGX()_SPU()_CONTROL1[USXGMII_TYPE].  The description indicates
+ * the maximum rate and the maximum number of ports (LMACs) for each sub-
+ * type. The minimum rate for any port is 10M. The rate selection for
+ * each LMAC is made using CGX()_SPU()_CONTROL1[USXGMII_RATE] and the
+ * number of active ports/LMACs is implicitly determined by the value
+ * given to CGX()_CMR()_CONFIG[ENABLE] for each LMAC.  Selecting a rate
+ * higher than the maximum allowed for a given port sub-type or enabling
+ * more LMACs than the maximum allowed for a given port sub-type will
+ * cause unpredictable behavior.
+ */
+#define CGX_USXGMII_TYPE_E_DXGMII_10G (3)
+#define CGX_USXGMII_TYPE_E_DXGMII_20G (5)
+#define CGX_USXGMII_TYPE_E_DXGMII_5G (4)
+#define CGX_USXGMII_TYPE_E_QXGMII_10G (7)
+#define CGX_USXGMII_TYPE_E_QXGMII_20G (6)
+#define CGX_USXGMII_TYPE_E_SXGMII_10G (0)
+#define CGX_USXGMII_TYPE_E_SXGMII_2G (2)
+#define CGX_USXGMII_TYPE_E_SXGMII_5G (1)
+
+/**
+ * Structure cgx_spu_br_lane_train_status_s
+ *
+ * INTERNAL:CGX Lane Training Status Structure  This is the group of lane
+ * status bits for a single lane in the BASE-R PMD status register (MDIO
+ * address 1.151) as defined in IEEE 802.3ba-2010, Table 45-55.
+ */
+union cgx_spu_br_lane_train_status_s {
+	u32 u;
+	struct cgx_spu_br_lane_train_status_s_s {
+		u32 rx_trained                       : 1;
+		u32 frame_lock                       : 1;
+		u32 training                         : 1;
+		u32 training_failure                 : 1;
+		u32 reserved_4_31                    : 28;
+	} s;
+	/* struct cgx_spu_br_lane_train_status_s_s cn; */
+};
+
+/**
+ * Structure cgx_spu_br_train_cup_s
+ *
+ * INTERNAL:CGX Lane Training Coefficient Structure  This is the
+ * coefficient update field of the BASE-R link training packet as defined
+ * in IEEE 802.3, Table 72-4.
+ */
+union cgx_spu_br_train_cup_s {
+	u32 u;
+	struct cgx_spu_br_train_cup_s_s {
+		u32 pre_cup                          : 2;
+		u32 main_cup                         : 2;
+		u32 post_cup                         : 2;
+		u32 reserved_6_11                    : 6;
+		u32 init                             : 1;
+		u32 preset                           : 1;
+		u32 reserved_14_31                   : 18;
+	} s;
+	struct cgx_spu_br_train_cup_s_cn {
+		u32 pre_cup                          : 2;
+		u32 main_cup                         : 2;
+		u32 post_cup                         : 2;
+		u32 reserved_6_11                    : 6;
+		u32 init                             : 1;
+		u32 preset                           : 1;
+		u32 reserved_14_15                   : 2;
+		u32 reserved_16_31                   : 16;
+	} cn;
+};
+
+/**
+ * Structure cgx_spu_br_train_rep_s
+ *
+ * INTERNAL:CGX Training Report Structure  This is the status report
+ * field of the BASE-R link training packet as defined in IEEE 802.3,
+ * Table 72-5.
+ */
+union cgx_spu_br_train_rep_s {
+	u32 u;
+	struct cgx_spu_br_train_rep_s_s {
+		u32 pre_cst                          : 2;
+		u32 main_cst                         : 2;
+		u32 post_cst                         : 2;
+		u32 reserved_6_14                    : 9;
+		u32 rx_ready                         : 1;
+		u32 reserved_16_31                   : 16;
+	} s;
+	/* struct cgx_spu_br_train_rep_s_s cn; */
+};
+
+/**
+ * Structure cgx_spu_sds_cu_s
+ *
+ * INTERNAL: CGX Training Coeffiecient Structure  This structure is
+ * similar to CGX_SPU_BR_TRAIN_CUP_S format, but with reserved fields
+ * removed and [RCVR_READY] field added.
+ */
+union cgx_spu_sds_cu_s {
+	u32 u;
+	struct cgx_spu_sds_cu_s_s {
+		u32 pre_cu                           : 2;
+		u32 main_cu                          : 2;
+		u32 post_cu                          : 2;
+		u32 initialize                       : 1;
+		u32 preset                           : 1;
+		u32 rcvr_ready                       : 1;
+		u32 reserved_9_31                    : 23;
+	} s;
+	/* struct cgx_spu_sds_cu_s_s cn; */
+};
+
+/**
+ * Structure cgx_spu_sds_skew_status_s
+ *
+ * CGX Skew Status Structure Provides receive skew information detected
+ * for a physical SerDes lane when it is assigned to a multilane
+ * LMAC/LPCS. Contents are valid when RX deskew is done for the
+ * associated LMAC/LPCS.
+ */
+union cgx_spu_sds_skew_status_s {
+	u32 u;
+	struct cgx_spu_sds_skew_status_s_s {
+		u32 am_timestamp                     : 12;
+		u32 reserved_12_15                   : 4;
+		u32 am_lane_id                       : 5;
+		u32 reserved_21_22                   : 2;
+		u32 lane_skew                        : 7;
+		u32 reserved_30_31                   : 2;
+	} s;
+	/* struct cgx_spu_sds_skew_status_s_s cn; */
+};
+
+/**
+ * Structure cgx_spu_sds_sr_s
+ *
+ * INTERNAL: CGX Lane Training Coefficient Structure  Similar to
+ * CGX_SPU_BR_TRAIN_REP_S format, but with reserved and RX ready fields
+ * removed.
+ */
+union cgx_spu_sds_sr_s {
+	u32 u;
+	struct cgx_spu_sds_sr_s_s {
+		u32 pre_status                       : 2;
+		u32 main_status                      : 2;
+		u32 post_status                      : 2;
+		u32 reserved_6_31                    : 26;
+	} s;
+	/* struct cgx_spu_sds_sr_s_s cn; */
+};
+
+/**
+ * Register (RSL) cgx#_active_pc
+ *
+ * CGX ACTIVE PC Register This register counts the conditional clocks for
+ * power management.
+ */
+union cgxx_active_pc {
+	u64 u;
+	struct cgxx_active_pc_s {
+		u64 cnt                              : 64;
+	} s;
+	/* struct cgxx_active_pc_s cn; */
+};
+
+static inline u64 CGXX_ACTIVE_PC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_ACTIVE_PC(void)
+{
+	return 0x2010;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_activity
+ *
+ * CGX CMR Activity Registers
+ */
+union cgxx_cmrx_activity {
+	u64 u;
+	struct cgxx_cmrx_activity_s {
+		u64 act_tx_lo                        : 1;
+		u64 act_tx_hi                        : 1;
+		u64 pause_tx                         : 1;
+		u64 act_rx_lo                        : 1;
+		u64 act_rx_hi                        : 1;
+		u64 pause_rx                         : 1;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct cgxx_cmrx_activity_s cn; */
+};
+
+static inline u64 CGXX_CMRX_ACTIVITY(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_ACTIVITY(u64 a)
+{
+	return 0x5f8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_config
+ *
+ * CGX CMR Configuration Registers Logical MAC/PCS configuration
+ * registers; one per LMAC. The maximum number of LMACs (and maximum LMAC
+ * ID) that can be enabled by these registers is limited by
+ * CGX()_CMR_RX_LMACS[LMACS] and CGX()_CMR_TX_LMACS[LMACS].  Internal:
+ * \<pre\> Example configurations:   ------------------------------------
+ * ---------------------------------------   Configuration
+ * LMACS  Register             [ENABLE]    [LMAC_TYPE]   ----------------
+ * -----------------------------------------------------------
+ * 1x50G+1x25G+1xSGMII     4      CGXn_CMR0_CONFIG     1           8
+ * CGXn_CMR1_CONFIG     0           --
+ * CGXn_CMR2_CONFIG     1           7
+ * CGXn_CMR3_CONFIG     1           0   ---------------------------------
+ * ------------------------------------------   USXGMII
+ * 1-4    CGXn_CMR0_CONFIG     1           a
+ * CGXn_CMR1_CONFIG     1           a
+ * CGXn_CMR2_CONFIG     1           a
+ * CGXn_CMR3_CONFIG     1           a   ---------------------------------
+ * ------------------------------------------   1x100GBASE-R4           1
+ * CGXn_CMR0_CONFIG     1           9
+ * CGXn_CMR1_CONFIG     0           --
+ * CGXn_CMR2_CONFIG     0           --
+ * CGXn_CMR3_CONFIG     0           --   --------------------------------
+ * -------------------------------------------   2x50GBASE-R2
+ * 2      CGXn_CMR0_CONFIG     1           8
+ * CGXn_CMR1_CONFIG     1           8
+ * CGXn_CMR2_CONFIG     0           --
+ * CGXn_CMR3_CONFIG     0           --   --------------------------------
+ * -------------------------------------------   4x25GBASE-R
+ * 4      CGXn_CMR0_CONFIG     1           7
+ * CGXn_CMR1_CONFIG     1           7
+ * CGXn_CMR2_CONFIG     1           7
+ * CGXn_CMR3_CONFIG     1           7   ---------------------------------
+ * ------------------------------------------   QSGMII                  4
+ * CGXn_CMR0_CONFIG     1           6
+ * CGXn_CMR1_CONFIG     1           6
+ * CGXn_CMR2_CONFIG     1           6
+ * CGXn_CMR3_CONFIG     1           6   ---------------------------------
+ * ------------------------------------------   1x40GBASE-R4            1
+ * CGXn_CMR0_CONFIG     1           4
+ * CGXn_CMR1_CONFIG     0           --
+ * CGXn_CMR2_CONFIG     0           --
+ * CGXn_CMR3_CONFIG     0           --   --------------------------------
+ * -------------------------------------------   4x10GBASE-R
+ * 4      CGXn_CMR0_CONFIG     1           3
+ * CGXn_CMR1_CONFIG     1           3
+ * CGXn_CMR2_CONFIG     1           3
+ * CGXn_CMR3_CONFIG     1           3   ---------------------------------
+ * ------------------------------------------   2xRXAUI                 2
+ * CGXn_CMR0_CONFIG     1           2
+ * CGXn_CMR1_CONFIG     1           2
+ * CGXn_CMR2_CONFIG     0           --
+ * CGXn_CMR3_CONFIG     0           --   --------------------------------
+ * -------------------------------------------   1x10GBASE-X/XAUI/DXAUI
+ * 1      CGXn_CMR0_CONFIG     1           1
+ * CGXn_CMR1_CONFIG     0           --
+ * CGXn_CMR2_CONFIG     0           --
+ * CGXn_CMR3_CONFIG     0           --   --------------------------------
+ * -------------------------------------------   4xSGMII/1000BASE-X
+ * 4      CGXn_CMR0_CONFIG     1           0
+ * CGXn_CMR1_CONFIG     1           0
+ * CGXn_CMR2_CONFIG     1           0
+ * CGXn_CMR3_CONFIG     1           0   ---------------------------------
+ * ------------------------------------------ \</pre\>
+ */
+union cgxx_cmrx_config {
+	u64 u;
+	struct cgxx_cmrx_config_s {
+		u64 lane_to_sds                      : 8;
+		u64 reserved_8_39                    : 32;
+		u64 lmac_type                        : 4;
+		u64 unused                           : 8;
+		u64 int_beat_gen                     : 1;
+		u64 data_pkt_tx_en                   : 1;
+		u64 data_pkt_rx_en                   : 1;
+		u64 enable                           : 1;
+		u64 x2p_select                       : 3;
+		u64 p2x_select                       : 3;
+		u64 reserved_62_63                   : 2;
+	} s;
+	/* struct cgxx_cmrx_config_s cn; */
+};
+
+static inline u64 CGXX_CMRX_CONFIG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_CONFIG(u64 a)
+{
+	return 0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_int
+ *
+ * CGX CMR Interrupt Register
+ */
+union cgxx_cmrx_int {
+	u64 u;
+	struct cgxx_cmrx_int_s {
+		u64 pause_drp                        : 1;
+		u64 overflw                          : 1;
+		u64 nic_nxc                          : 1;
+		u64 nix0_nxc                         : 1;
+		u64 nix1_nxc                         : 1;
+		u64 nix0_e_nxc                       : 1;
+		u64 nix1_e_nxc                       : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_cmrx_int_s cn; */
+};
+
+static inline u64 CGXX_CMRX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_INT(u64 a)
+{
+	return 0x40 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_int_ena_w1c
+ *
+ * CGX CMR Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union cgxx_cmrx_int_ena_w1c {
+	u64 u;
+	struct cgxx_cmrx_int_ena_w1c_s {
+		u64 pause_drp                        : 1;
+		u64 overflw                          : 1;
+		u64 nic_nxc                          : 1;
+		u64 nix0_nxc                         : 1;
+		u64 nix1_nxc                         : 1;
+		u64 nix0_e_nxc                       : 1;
+		u64 nix1_e_nxc                       : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_cmrx_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_CMRX_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_INT_ENA_W1C(u64 a)
+{
+	return 0x50 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_int_ena_w1s
+ *
+ * CGX CMR Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union cgxx_cmrx_int_ena_w1s {
+	u64 u;
+	struct cgxx_cmrx_int_ena_w1s_s {
+		u64 pause_drp                        : 1;
+		u64 overflw                          : 1;
+		u64 nic_nxc                          : 1;
+		u64 nix0_nxc                         : 1;
+		u64 nix1_nxc                         : 1;
+		u64 nix0_e_nxc                       : 1;
+		u64 nix1_e_nxc                       : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_cmrx_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMRX_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_INT_ENA_W1S(u64 a)
+{
+	return 0x58 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_int_w1s
+ *
+ * CGX CMR Interrupt Set Register This register sets interrupt bits.
+ */
+union cgxx_cmrx_int_w1s {
+	u64 u;
+	struct cgxx_cmrx_int_w1s_s {
+		u64 pause_drp                        : 1;
+		u64 overflw                          : 1;
+		u64 nic_nxc                          : 1;
+		u64 nix0_nxc                         : 1;
+		u64 nix1_nxc                         : 1;
+		u64 nix0_e_nxc                       : 1;
+		u64 nix1_e_nxc                       : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_cmrx_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMRX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_INT_W1S(u64 a)
+{
+	return 0x48 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_led_timing
+ *
+ * CGX MAC LED Activity Timing Registers
+ */
+union cgxx_cmrx_led_timing {
+	u64 u;
+	struct cgxx_cmrx_led_timing_s {
+		u64 extension                        : 8;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct cgxx_cmrx_led_timing_s cn; */
+};
+
+static inline u64 CGXX_CMRX_LED_TIMING(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_LED_TIMING(u64 a)
+{
+	return 0x5f0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_prt_cbfc_ctl
+ *
+ * CGX CMR LMAC PFC Control Registers See CGX()_CMR()_RX_LOGL_XOFF[XOFF].
+ */
+union cgxx_cmrx_prt_cbfc_ctl {
+	u64 u;
+	struct cgxx_cmrx_prt_cbfc_ctl_s {
+		u64 reserved_0_15                    : 16;
+		u64 phys_bp                          : 16;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_cmrx_prt_cbfc_ctl_s cn; */
+};
+
+static inline u64 CGXX_CMRX_PRT_CBFC_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_PRT_CBFC_CTL(u64 a)
+{
+	return 0x608 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_bp_drop
+ *
+ * CGX Receive Backpressure Drop Register
+ */
+union cgxx_cmrx_rx_bp_drop {
+	u64 u;
+	struct cgxx_cmrx_rx_bp_drop_s {
+		u64 mark                             : 7;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_cmrx_rx_bp_drop_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_BP_DROP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_BP_DROP(u64 a)
+{
+	return 0xd8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_bp_off
+ *
+ * CGX Receive Backpressure Off Register
+ */
+union cgxx_cmrx_rx_bp_off {
+	u64 u;
+	struct cgxx_cmrx_rx_bp_off_s {
+		u64 mark                             : 7;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_cmrx_rx_bp_off_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_BP_OFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_BP_OFF(u64 a)
+{
+	return 0xe8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_bp_on
+ *
+ * CGX Receive Backpressure On Register
+ */
+union cgxx_cmrx_rx_bp_on {
+	u64 u;
+	struct cgxx_cmrx_rx_bp_on_s {
+		u64 mark                             : 13;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct cgxx_cmrx_rx_bp_on_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_BP_ON(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_BP_ON(u64 a)
+{
+	return 0xe0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_bp_status
+ *
+ * CGX CMR Receive Backpressure Status Registers
+ */
+union cgxx_cmrx_rx_bp_status {
+	u64 u;
+	struct cgxx_cmrx_rx_bp_status_s {
+		u64 bp                               : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_cmrx_rx_bp_status_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_BP_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_BP_STATUS(u64 a)
+{
+	return 0xf0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_dmac_ctl0
+ *
+ * CGX CMR Receive DMAC Address-Control0 Register DMAC CAM control
+ * register for use by X2P/NIX bound traffic. Received packets are only
+ * passed to X2P/NIX when the DMAC0 filter result is ACCEPT and STEERING0
+ * filter result is PASS. See also CGX()_CMR_RX_DMAC()_CAM0 and
+ * CGX()_CMR_RX_STEERING0().  Internal: "* ALGORITHM Here is some pseudo
+ * code that represents the address filter behavior. \<pre\>
+ * dmac_addr_filter(uint8 prt, uint48 dmac) { for (lmac=0, lmac\<4,
+ * lmac++) {   if (is_bcst(dmac))                               //
+ * broadcast accept     return (CGX()_CMR(lmac)_RX_DMAC_CTL0[BCST_ACCEPT]
+ * ? ACCEPT : REJECT);   if (is_mcst(dmac) &&
+ * CGX()_CMR(lmac)_RX_DMAC_CTL0[MCST_MODE] == 0)   // multicast reject
+ * return REJECT;   if (is_mcst(dmac) &&
+ * CGX()_CMR(lmac)_RX_DMAC_CTL0[MCST_MODE] == 1)   // multicast accept
+ * return ACCEPT;   else        // DMAC CAM filter     cam_hit = 0;   for
+ * (i=0; i\<32; i++) {     cam = CGX()_CMR_RX_DMAC(i)_CAM0;     if
+ * (cam[EN] && cam[ID] == lmac && cam[ADR] == dmac) {       cam_hit = 1;
+ * break;     }   }   if (cam_hit) {     return
+ * (CGX()_CMR(lmac)_RX_DMAC_CTL0[CAM_ACCEPT] ? ACCEPT : REJECT);   else
+ * return (CGX()_CMR(lmac)_RX_DMAC_CTL0[CAM_ACCEPT] ? REJECT : ACCEPT);
+ * } } \</pre\>"
+ */
+union cgxx_cmrx_rx_dmac_ctl0 {
+	u64 u;
+	struct cgxx_cmrx_rx_dmac_ctl0_s {
+		u64 bcst_accept                      : 1;
+		u64 mcst_mode                        : 2;
+		u64 cam_accept                       : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct cgxx_cmrx_rx_dmac_ctl0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_DMAC_CTL0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_DMAC_CTL0(u64 a)
+{
+	return 0x1f8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_dmac_ctl1
+ *
+ * CGX CMR Receive DMAC Address-Control1 Register DMAC CAM control
+ * register for use by NCSI bound traffic. Received packets are only
+ * passed to NCSI when the DMAC1 filter result is ACCEPT and STEERING1
+ * filter result is PASS. See also CGX()_CMR_RX_DMAC()_CAM1 and
+ * CGX()_CMR_RX_STEERING1(). For use with the LMAC associated with NCSI;
+ * see CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID].  Internal: ALGORITHM: See
+ * CGX()_CMR()_RX_DMAC_CTL0.
+ */
+union cgxx_cmrx_rx_dmac_ctl1 {
+	u64 u;
+	struct cgxx_cmrx_rx_dmac_ctl1_s {
+		u64 bcst_accept                      : 1;
+		u64 mcst_mode                        : 2;
+		u64 cam_accept                       : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct cgxx_cmrx_rx_dmac_ctl1_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_DMAC_CTL1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_DMAC_CTL1(u64 a)
+{
+	return 0x3f8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_fifo_len
+ *
+ * CGX CMR Receive Fifo Length Registers
+ */
+union cgxx_cmrx_rx_fifo_len {
+	u64 u;
+	struct cgxx_cmrx_rx_fifo_len_s {
+		u64 fifo_len                         : 14;
+		u64 busy                             : 1;
+		u64 fifo_len_e                       : 14;
+		u64 busy_e                           : 1;
+		u64 reserved_30_63                   : 34;
+	} s;
+	/* struct cgxx_cmrx_rx_fifo_len_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_FIFO_LEN(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_FIFO_LEN(u64 a)
+{
+	return 0x108 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_id_map
+ *
+ * CGX CMR Receive ID Map Register These registers set the RX LMAC ID
+ * mapping for X2P/NIX.
+ */
+union cgxx_cmrx_rx_id_map {
+	u64 u;
+	struct cgxx_cmrx_rx_id_map_s {
+		u64 pknd                             : 6;
+		u64 unused                           : 2;
+		u64 rid                              : 7;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct cgxx_cmrx_rx_id_map_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_ID_MAP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_ID_MAP(u64 a)
+{
+	return 0x60 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_logl_xoff
+ *
+ * CGX CMR Receive Logical XOFF Registers
+ */
+union cgxx_cmrx_rx_logl_xoff {
+	u64 u;
+	struct cgxx_cmrx_rx_logl_xoff_s {
+		u64 xoff                             : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_cmrx_rx_logl_xoff_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_LOGL_XOFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_LOGL_XOFF(u64 a)
+{
+	return 0xf8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_logl_xon
+ *
+ * CGX CMR Receive Logical XON Registers
+ */
+union cgxx_cmrx_rx_logl_xon {
+	u64 u;
+	struct cgxx_cmrx_rx_logl_xon_s {
+		u64 xon                              : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_cmrx_rx_logl_xon_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_LOGL_XON(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_LOGL_XON(u64 a)
+{
+	return 0x100 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat0
+ *
+ * CGX RX Preemption Status Register 0
+ */
+union cgxx_cmrx_rx_merge_stat0 {
+	u64 u;
+	struct cgxx_cmrx_rx_merge_stat0_s {
+		u64 fa_err_cnt                       : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_merge_stat0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT0(u64 a)
+{
+	return 0x138 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat1
+ *
+ * CGX RX Preemption Status Register 1
+ */
+union cgxx_cmrx_rx_merge_stat1 {
+	u64 u;
+	struct cgxx_cmrx_rx_merge_stat1_s {
+		u64 fs_err_cnt                       : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_merge_stat1_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT1(u64 a)
+{
+	return 0x140 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat2
+ *
+ * CGX RX Preemption Status Register 2
+ */
+union cgxx_cmrx_rx_merge_stat2 {
+	u64 u;
+	struct cgxx_cmrx_rx_merge_stat2_s {
+		u64 fa_ok_cnt                        : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_merge_stat2_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT2(u64 a)
+{
+	return 0x148 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat3
+ *
+ * CGX RX Preemption Status Register 3
+ */
+union cgxx_cmrx_rx_merge_stat3 {
+	u64 u;
+	struct cgxx_cmrx_rx_merge_stat3_s {
+		u64 ff_cnt                           : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_merge_stat3_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT3(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT3(u64 a)
+{
+	return 0x150 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_merge_stat4
+ *
+ * CGX RX Preemption Status Register 4
+ */
+union cgxx_cmrx_rx_merge_stat4 {
+	u64 u;
+	struct cgxx_cmrx_rx_merge_stat4_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_merge_stat4_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_MERGE_STAT4(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_MERGE_STAT4(u64 a)
+{
+	return 0x158 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_pause_drop_time
+ *
+ * CGX CMR Receive Pause Drop-Time Register
+ */
+union cgxx_cmrx_rx_pause_drop_time {
+	u64 u;
+	struct cgxx_cmrx_rx_pause_drop_time_s {
+		u64 pause_time                       : 16;
+		u64 pause_time_e                     : 16;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_cmrx_rx_pause_drop_time_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_PAUSE_DROP_TIME(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_PAUSE_DROP_TIME(u64 a)
+{
+	return 0x68 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat0
+ *
+ * CGX Receive Status Register 0 These registers provide a count of
+ * received packets that meet the following conditions: * are not
+ * recognized as ERROR packets(any OPCODE). * are not recognized as PAUSE
+ * packets. * are not dropped due FIFO full status. * are not dropped due
+ * DMAC0 or STEERING0 filtering.  Internal: "This pseudo code represents
+ * the RX STAT0 through STAT8 accounting: \<pre\> If (errored)   incr
+ * RX_STAT8 else if (ctrl packet, i.e. Pause/PFC)   incr RX_STAT2,3 else
+ * if (fifo full drop)   incr RX_STAT6,7 else if (DMAC0/VLAN0 filter
+ * drop)   incr RX_STAT4,5 if not a filter+decision else   incr
+ * RX_STAT0,1 end \</pre\>"
+ */
+union cgxx_cmrx_rx_stat0 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat0_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT0(u64 a)
+{
+	return 0x70 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat1
+ *
+ * CGX Receive Status Register 1 These registers provide a count of
+ * octets of received packets.
+ */
+union cgxx_cmrx_rx_stat1 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat1_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat1_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT1(u64 a)
+{
+	return 0x78 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat2
+ *
+ * CGX Receive Status Register 2 These registers provide a count of
+ * received packets that meet the following conditions: * are not
+ * recognized as ERROR packets(any OPCODE). * are recognized as PAUSE
+ * packets.  Pause packets can be optionally dropped or forwarded based
+ * on
+ * CGX()_SMU()_RX_FRM_CTL[CTL_DRP]/CGX()_GMP_GMI_RX()_FRM_CTL[CTL_DRP].
+ * This count increments regardless of whether the packet is dropped.
+ */
+union cgxx_cmrx_rx_stat2 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat2_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat2_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT2(u64 a)
+{
+	return 0x80 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat3
+ *
+ * CGX Receive Status Register 3 These registers provide a count of
+ * octets of received PAUSE and control packets.
+ */
+union cgxx_cmrx_rx_stat3 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat3_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat3_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT3(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT3(u64 a)
+{
+	return 0x88 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat4
+ *
+ * CGX Receive Status Register 4 These registers provide a count of
+ * received packets that meet the following conditions: * are not
+ * recognized as ERROR packets(any OPCODE). * are not recognized as PAUSE
+ * packets. * are not dropped due FIFO full status. * are dropped due
+ * DMAC0 or STEERING0 filtering.  16B packets or smaller (20B in case of
+ * FCS strip) as the result of truncation or other means are not dropped
+ * by CGX (unless filter and decision is also asserted) and will never
+ * appear in this count. Should the MAC signal to the CMR that the packet
+ * be filtered upon decision before the end of packet, then STAT4 and
+ * STAT5 will not be updated.
+ */
+union cgxx_cmrx_rx_stat4 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat4_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat4_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT4(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT4(u64 a)
+{
+	return 0x90 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat5
+ *
+ * CGX Receive Status Register 5 These registers provide a count of
+ * octets of filtered DMAC0 or VLAN STEERING0 packets.
+ */
+union cgxx_cmrx_rx_stat5 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat5_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat5_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT5(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT5(u64 a)
+{
+	return 0x98 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat6
+ *
+ * CGX Receive Status Register 6 These registers provide a count of
+ * received packets that meet the following conditions: * are not
+ * recognized as ERROR packets(any OPCODE). * are not recognized as PAUSE
+ * packets. * are dropped due FIFO full status.  They do not count any
+ * packet that is truncated at the point of overflow and sent on to the
+ * NIX. The truncated packet will be marked with error and increment
+ * STAT8. These registers count all entire packets dropped by the FIFO
+ * for a given LMAC.
+ */
+union cgxx_cmrx_rx_stat6 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat6_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat6_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT6(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT6(u64 a)
+{
+	return 0xa0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat7
+ *
+ * CGX Receive Status Register 7 These registers provide a count of
+ * octets of received packets that were dropped due to a full receive
+ * FIFO.
+ */
+union cgxx_cmrx_rx_stat7 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat7_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat7_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT7(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT7(u64 a)
+{
+	return 0xa8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat8
+ *
+ * CGX Receive Status Register 8 These registers provide a count of
+ * received packets that meet the following conditions:  * are recognized
+ * as ERROR packets(any OPCODE).
+ */
+union cgxx_cmrx_rx_stat8 {
+	u64 u;
+	struct cgxx_cmrx_rx_stat8_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat8_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT8(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT8(u64 a)
+{
+	return 0xb0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_rx_stat_pri#_xoff
+ *
+ * CGX CMR RX XON to XOFF transition Registers
+ */
+union cgxx_cmrx_rx_stat_prix_xoff {
+	u64 u;
+	struct cgxx_cmrx_rx_stat_prix_xoff_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_rx_stat_prix_xoff_s cn; */
+};
+
+static inline u64 CGXX_CMRX_RX_STAT_PRIX_XOFF(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_RX_STAT_PRIX_XOFF(u64 a, u64 b)
+{
+	return 0x7c0 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_scratch#
+ *
+ * CGX CMR Scratch Registers
+ */
+union cgxx_cmrx_scratchx {
+	u64 u;
+	struct cgxx_cmrx_scratchx_s {
+		u64 scratch                          : 64;
+	} s;
+	/* struct cgxx_cmrx_scratchx_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SCRATCHX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SCRATCHX(u64 a, u64 b)
+{
+	return 0x1050 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_sw_int
+ *
+ * CGX CMR Interrupt Register
+ */
+union cgxx_cmrx_sw_int {
+	u64 u;
+	struct cgxx_cmrx_sw_int_s {
+		u64 sw_set                           : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_cmrx_sw_int_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SW_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SW_INT(u64 a)
+{
+	return 0x180 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_sw_int_ena_w1c
+ *
+ * CGX CMR Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union cgxx_cmrx_sw_int_ena_w1c {
+	u64 u;
+	struct cgxx_cmrx_sw_int_ena_w1c_s {
+		u64 sw_set                           : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_cmrx_sw_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SW_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SW_INT_ENA_W1C(u64 a)
+{
+	return 0x190 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_sw_int_ena_w1s
+ *
+ * CGX CMR Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union cgxx_cmrx_sw_int_ena_w1s {
+	u64 u;
+	struct cgxx_cmrx_sw_int_ena_w1s_s {
+		u64 sw_set                           : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_cmrx_sw_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SW_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SW_INT_ENA_W1S(u64 a)
+{
+	return 0x198 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_sw_int_w1s
+ *
+ * CGX CMR Interrupt Set Register This register sets interrupt bits.
+ */
+union cgxx_cmrx_sw_int_w1s {
+	u64 u;
+	struct cgxx_cmrx_sw_int_w1s_s {
+		u64 sw_set                           : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_cmrx_sw_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMRX_SW_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_SW_INT_W1S(u64 a)
+{
+	return 0x188 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_channel
+ *
+ * CGX CMR Transmit-Channels Registers
+ */
+union cgxx_cmrx_tx_channel {
+	u64 u;
+	struct cgxx_cmrx_tx_channel_s {
+		u64 msk                              : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_cmrx_tx_channel_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_CHANNEL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_CHANNEL(u64 a)
+{
+	return 0x600 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_fifo_len
+ *
+ * CGX CMR Transmit Fifo Length Registers
+ */
+union cgxx_cmrx_tx_fifo_len {
+	u64 u;
+	struct cgxx_cmrx_tx_fifo_len_s {
+		u64 fifo_len                         : 14;
+		u64 lmac_idle                        : 1;
+		u64 fifo_e_len                       : 14;
+		u64 lmac_e_idle                      : 1;
+		u64 reserved_30_63                   : 34;
+	} s;
+	/* struct cgxx_cmrx_tx_fifo_len_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_FIFO_LEN(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_FIFO_LEN(u64 a)
+{
+	return 0x618 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_hg2_status
+ *
+ * CGX CMR Transmit HiGig2 Status Registers
+ */
+union cgxx_cmrx_tx_hg2_status {
+	u64 u;
+	struct cgxx_cmrx_tx_hg2_status_s {
+		u64 lgtim2go                         : 16;
+		u64 xof                              : 16;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_cmrx_tx_hg2_status_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_HG2_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_HG2_STATUS(u64 a)
+{
+	return 0x610 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_merge_stat0
+ *
+ * CGX TX Preemption Status Register 0
+ */
+union cgxx_cmrx_tx_merge_stat0 {
+	u64 u;
+	struct cgxx_cmrx_tx_merge_stat0_s {
+		u64 ff_cnt                           : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_merge_stat0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_MERGE_STAT0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_MERGE_STAT0(u64 a)
+{
+	return 0x160 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_ovr_bp
+ *
+ * CGX CMR Transmit-Channels Backpressure Override Registers
+ */
+union cgxx_cmrx_tx_ovr_bp {
+	u64 u;
+	struct cgxx_cmrx_tx_ovr_bp_s {
+		u64 tx_chan_bp                       : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_cmrx_tx_ovr_bp_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_OVR_BP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_OVR_BP(u64 a)
+{
+	return 0x620 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat0
+ *
+ * CGX CMR Transmit Statistics Registers 0
+ */
+union cgxx_cmrx_tx_stat0 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat0_s {
+		u64 xscol                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat0_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT0(u64 a)
+{
+	return 0x700 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat1
+ *
+ * CGX CMR Transmit Statistics Registers 1
+ */
+union cgxx_cmrx_tx_stat1 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat1_s {
+		u64 xsdef                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat1_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT1(u64 a)
+{
+	return 0x708 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat10
+ *
+ * CGX CMR Transmit Statistics Registers 10
+ */
+union cgxx_cmrx_tx_stat10 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat10_s {
+		u64 hist4                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat10_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT10(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT10(u64 a)
+{
+	return 0x750 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat11
+ *
+ * CGX CMR Transmit Statistics Registers 11
+ */
+union cgxx_cmrx_tx_stat11 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat11_s {
+		u64 hist5                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat11_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT11(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT11(u64 a)
+{
+	return 0x758 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat12
+ *
+ * CGX CMR Transmit Statistics Registers 12
+ */
+union cgxx_cmrx_tx_stat12 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat12_s {
+		u64 hist6                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat12_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT12(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT12(u64 a)
+{
+	return 0x760 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat13
+ *
+ * CGX CMR Transmit Statistics Registers 13
+ */
+union cgxx_cmrx_tx_stat13 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat13_s {
+		u64 hist7                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat13_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT13(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT13(u64 a)
+{
+	return 0x768 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat14
+ *
+ * CGX CMR Transmit Statistics Registers 14
+ */
+union cgxx_cmrx_tx_stat14 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat14_s {
+		u64 bcst                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat14_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT14(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT14(u64 a)
+{
+	return 0x770 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat15
+ *
+ * CGX CMR Transmit Statistics Registers 15
+ */
+union cgxx_cmrx_tx_stat15 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat15_s {
+		u64 mcst                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat15_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT15(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT15(u64 a)
+{
+	return 0x778 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat16
+ *
+ * CGX CMR Transmit Statistics Registers 16
+ */
+union cgxx_cmrx_tx_stat16 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat16_s {
+		u64 undflw                           : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat16_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT16(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT16(u64 a)
+{
+	return 0x780 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat17
+ *
+ * CGX CMR Transmit Statistics Registers 17
+ */
+union cgxx_cmrx_tx_stat17 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat17_s {
+		u64 ctl                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat17_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT17(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT17(u64 a)
+{
+	return 0x788 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat2
+ *
+ * CGX CMR Transmit Statistics Registers 2
+ */
+union cgxx_cmrx_tx_stat2 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat2_s {
+		u64 mcol                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat2_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT2(u64 a)
+{
+	return 0x710 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat3
+ *
+ * CGX CMR Transmit Statistics Registers 3
+ */
+union cgxx_cmrx_tx_stat3 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat3_s {
+		u64 scol                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat3_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT3(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT3(u64 a)
+{
+	return 0x718 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat4
+ *
+ * CGX CMR Transmit Statistics Registers 4
+ */
+union cgxx_cmrx_tx_stat4 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat4_s {
+		u64 octs                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat4_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT4(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT4(u64 a)
+{
+	return 0x720 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat5
+ *
+ * CGX CMR Transmit Statistics Registers 5
+ */
+union cgxx_cmrx_tx_stat5 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat5_s {
+		u64 pkts                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat5_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT5(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT5(u64 a)
+{
+	return 0x728 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat6
+ *
+ * CGX CMR Transmit Statistics Registers 6
+ */
+union cgxx_cmrx_tx_stat6 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat6_s {
+		u64 hist0                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat6_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT6(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT6(u64 a)
+{
+	return 0x730 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat7
+ *
+ * CGX CMR Transmit Statistics Registers 7
+ */
+union cgxx_cmrx_tx_stat7 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat7_s {
+		u64 hist1                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat7_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT7(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT7(u64 a)
+{
+	return 0x738 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat8
+ *
+ * CGX CMR Transmit Statistics Registers 8
+ */
+union cgxx_cmrx_tx_stat8 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat8_s {
+		u64 hist2                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat8_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT8(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT8(u64 a)
+{
+	return 0x740 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat9
+ *
+ * CGX CMR Transmit Statistics Registers 9
+ */
+union cgxx_cmrx_tx_stat9 {
+	u64 u;
+	struct cgxx_cmrx_tx_stat9_s {
+		u64 hist3                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat9_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT9(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT9(u64 a)
+{
+	return 0x748 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr#_tx_stat_pri#_xoff
+ *
+ * CGX CMR TX XON to XOFF transition Registers
+ */
+union cgxx_cmrx_tx_stat_prix_xoff {
+	u64 u;
+	struct cgxx_cmrx_tx_stat_prix_xoff_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmrx_tx_stat_prix_xoff_s cn; */
+};
+
+static inline u64 CGXX_CMRX_TX_STAT_PRIX_XOFF(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMRX_TX_STAT_PRIX_XOFF(u64 a, u64 b)
+{
+	return 0x800 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_bad
+ *
+ * CGX CMR Bad Registers
+ */
+union cgxx_cmr_bad {
+	u64 u;
+	struct cgxx_cmr_bad_s {
+		u64 rxb_nxl                          : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_cmr_bad_s cn; */
+};
+
+static inline u64 CGXX_CMR_BAD(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_BAD(void)
+{
+	return 0x1020;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_chan_msk_and
+ *
+ * CGX CMR Backpressure Channel Mask AND Registers
+ */
+union cgxx_cmr_chan_msk_and {
+	u64 u;
+	struct cgxx_cmr_chan_msk_and_s {
+		u64 msk_and                          : 64;
+	} s;
+	/* struct cgxx_cmr_chan_msk_and_s cn; */
+};
+
+static inline u64 CGXX_CMR_CHAN_MSK_AND(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_CHAN_MSK_AND(void)
+{
+	return 0x110;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_chan_msk_or
+ *
+ * CGX Backpressure Channel Mask OR Registers
+ */
+union cgxx_cmr_chan_msk_or {
+	u64 u;
+	struct cgxx_cmr_chan_msk_or_s {
+		u64 msk_or                           : 64;
+	} s;
+	/* struct cgxx_cmr_chan_msk_or_s cn; */
+};
+
+static inline u64 CGXX_CMR_CHAN_MSK_OR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_CHAN_MSK_OR(void)
+{
+	return 0x118;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_eco
+ *
+ * INTERNAL: CGX ECO Registers
+ */
+union cgxx_cmr_eco {
+	u64 u;
+	struct cgxx_cmr_eco_s {
+		u64 eco_rw                           : 32;
+		u64 eco_ro                           : 32;
+	} s;
+	/* struct cgxx_cmr_eco_s cn; */
+};
+
+static inline u64 CGXX_CMR_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_ECO(void)
+{
+	return 0x1028;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_global_config
+ *
+ * CGX CMR Global Configuration Register These registers configure the
+ * global CMR, PCS, and MAC.
+ */
+union cgxx_cmr_global_config {
+	u64 u;
+	struct cgxx_cmr_global_config_s {
+		u64 pmux_sds_sel                     : 1;
+		u64 cgx_clk_enable                   : 1;
+		u64 cmr_x2p_reset                    : 3;
+		u64 interleave_mode                  : 1;
+		u64 fcs_strip                        : 1;
+		u64 ncsi_lmac_id                     : 2;
+		u64 cmr_ncsi_drop                    : 1;
+		u64 cmr_ncsi_reset                   : 1;
+		u64 cmr_ncsi_tag_cnt                 : 13;
+		u64 cmr_clken_ovrd                   : 1;
+		u64 reserved_25_63                   : 39;
+	} s;
+	/* struct cgxx_cmr_global_config_s cn; */
+};
+
+static inline u64 CGXX_CMR_GLOBAL_CONFIG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_GLOBAL_CONFIG(void)
+{
+	return 8;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_mem_int
+ *
+ * CGX CMR Memory Interrupt Register
+ */
+union cgxx_cmr_mem_int {
+	u64 u;
+	struct cgxx_cmr_mem_int_s {
+		u64 gmp_in_overfl                    : 1;
+		u64 smu_in_overfl                    : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct cgxx_cmr_mem_int_s cn; */
+};
+
+static inline u64 CGXX_CMR_MEM_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_MEM_INT(void)
+{
+	return 0x10;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_mem_int_ena_w1c
+ *
+ * CGX CMR Memory Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union cgxx_cmr_mem_int_ena_w1c {
+	u64 u;
+	struct cgxx_cmr_mem_int_ena_w1c_s {
+		u64 gmp_in_overfl                    : 1;
+		u64 smu_in_overfl                    : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct cgxx_cmr_mem_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_CMR_MEM_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_MEM_INT_ENA_W1C(void)
+{
+	return 0x20;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_mem_int_ena_w1s
+ *
+ * CGX CMR Memory Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union cgxx_cmr_mem_int_ena_w1s {
+	u64 u;
+	struct cgxx_cmr_mem_int_ena_w1s_s {
+		u64 gmp_in_overfl                    : 1;
+		u64 smu_in_overfl                    : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct cgxx_cmr_mem_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMR_MEM_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_MEM_INT_ENA_W1S(void)
+{
+	return 0x28;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_mem_int_w1s
+ *
+ * CGX CMR Memory Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union cgxx_cmr_mem_int_w1s {
+	u64 u;
+	struct cgxx_cmr_mem_int_w1s_s {
+		u64 gmp_in_overfl                    : 1;
+		u64 smu_in_overfl                    : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct cgxx_cmr_mem_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_CMR_MEM_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_MEM_INT_W1S(void)
+{
+	return 0x18;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_nic_nxc_adr
+ *
+ * CGX CMR NIC NXC Exception Registers
+ */
+union cgxx_cmr_nic_nxc_adr {
+	u64 u;
+	struct cgxx_cmr_nic_nxc_adr_s {
+		u64 channel                          : 12;
+		u64 lmac_id                          : 4;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_cmr_nic_nxc_adr_s cn; */
+};
+
+static inline u64 CGXX_CMR_NIC_NXC_ADR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_NIC_NXC_ADR(void)
+{
+	return 0x1030;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_nix0_nxc_adr
+ *
+ * CGX CMR NIX0 NXC Exception Registers
+ */
+union cgxx_cmr_nix0_nxc_adr {
+	u64 u;
+	struct cgxx_cmr_nix0_nxc_adr_s {
+		u64 channel                          : 12;
+		u64 lmac_id                          : 4;
+		u64 channel_e                        : 12;
+		u64 lmac_e_id                        : 4;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_cmr_nix0_nxc_adr_s cn; */
+};
+
+static inline u64 CGXX_CMR_NIX0_NXC_ADR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_NIX0_NXC_ADR(void)
+{
+	return 0x1038;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_nix1_nxc_adr
+ *
+ * CGX CMR NIX1 NXC Exception Registers
+ */
+union cgxx_cmr_nix1_nxc_adr {
+	u64 u;
+	struct cgxx_cmr_nix1_nxc_adr_s {
+		u64 channel                          : 12;
+		u64 lmac_id                          : 4;
+		u64 channel_e                        : 12;
+		u64 lmac_e_id                        : 4;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_cmr_nix1_nxc_adr_s cn; */
+};
+
+static inline u64 CGXX_CMR_NIX1_NXC_ADR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_NIX1_NXC_ADR(void)
+{
+	return 0x1040;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_p2x#_count
+ *
+ * CGX P2X Activity Register
+ */
+union cgxx_cmr_p2xx_count {
+	u64 u;
+	struct cgxx_cmr_p2xx_count_s {
+		u64 p2x_cnt                          : 64;
+	} s;
+	/* struct cgxx_cmr_p2xx_count_s cn; */
+};
+
+static inline u64 CGXX_CMR_P2XX_COUNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_P2XX_COUNT(u64 a)
+{
+	return 0x168 + 0x1000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_dmac#_cam0
+ *
+ * CGX CMR Receive CAM Registers These registers provide access to the 32
+ * DMAC CAM0 entries in CGX, for use by X2P/NIX bound traffic.
+ */
+union cgxx_cmr_rx_dmacx_cam0 {
+	u64 u;
+	struct cgxx_cmr_rx_dmacx_cam0_s {
+		u64 adr                              : 48;
+		u64 en                               : 1;
+		u64 id                               : 2;
+		u64 reserved_51_63                   : 13;
+	} s;
+	/* struct cgxx_cmr_rx_dmacx_cam0_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_DMACX_CAM0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_DMACX_CAM0(u64 a)
+{
+	return 0x200 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_dmac#_cam1
+ *
+ * CGX CMR Receive CAM Registers These registers provide access to the 32
+ * DMAC CAM entries in CGX for use by NCSI bound traffic. See
+ * CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID] and CGX()_CMR_RX_STEERING1()
+ * registers.
+ */
+union cgxx_cmr_rx_dmacx_cam1 {
+	u64 u;
+	struct cgxx_cmr_rx_dmacx_cam1_s {
+		u64 adr                              : 48;
+		u64 en                               : 1;
+		u64 id                               : 2;
+		u64 reserved_51_63                   : 13;
+	} s;
+	/* struct cgxx_cmr_rx_dmacx_cam1_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_DMACX_CAM1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_DMACX_CAM1(u64 a)
+{
+	return 0x400 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_lmacs
+ *
+ * CGX CMR Receive Logical MACs Registers
+ */
+union cgxx_cmr_rx_lmacs {
+	u64 u;
+	struct cgxx_cmr_rx_lmacs_s {
+		u64 lmacs                            : 3;
+		u64 reserved_3_63                    : 61;
+	} s;
+	/* struct cgxx_cmr_rx_lmacs_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_LMACS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_LMACS(void)
+{
+	return 0x128;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_ovr_bp
+ *
+ * CGX CMR Receive-Ports Backpressure Override Registers Per-LMAC
+ * backpressure override register. For SMU, CGX()_CMR_RX_OVR_BP[EN]\<0\>
+ * must be set to one and CGX()_CMR_RX_OVR_BP[BP]\<0\> must be cleared to
+ * zero (to forcibly disable hardware-automatic 802.3 PAUSE packet
+ * generation) with the HiGig2 Protocol when
+ * CGX()_SMU()_HG2_CONTROL[HG2TX_EN]=0. (The HiGig2 protocol is indicated
+ * by CGX()_SMU()_TX_CTL[HG_EN]=1 and CGX()_SMU()_RX_UDD_SKP[LEN]=16).
+ * Hardware can only auto-generate backpressure through HiGig2 messages
+ * (optionally, when CGX()_SMU()_HG2_CONTROL[HG2TX_EN]=1) with the HiGig2
+ * protocol.
+ */
+union cgxx_cmr_rx_ovr_bp {
+	u64 u;
+	struct cgxx_cmr_rx_ovr_bp_s {
+		u64 ign_fifo_bp                      : 4;
+		u64 bp                               : 4;
+		u64 en                               : 4;
+		u64 reserved_12_63                   : 52;
+	} s;
+	/* struct cgxx_cmr_rx_ovr_bp_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_OVR_BP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_OVR_BP(void)
+{
+	return 0x130;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_stat10
+ *
+ * CGX Receive Status Register 10 These registers provide a count of
+ * octets of filtered DMAC1 or VLAN STEERING1 packets.
+ */
+union cgxx_cmr_rx_stat10 {
+	u64 u;
+	struct cgxx_cmr_rx_stat10_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmr_rx_stat10_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STAT10(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STAT10(void)
+{
+	return 0xc0;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_stat11
+ *
+ * CGX Receive Status Register 11 This registers provides a count of
+ * packets dropped at the NCSI interface. This includes drops due to
+ * CGX()_CMR_GLOBAL_CONFIG[CMR_NCSI_DROP] or NCSI FIFO full. The count of
+ * dropped NCSI packets is not accounted for in any other stats
+ * registers.
+ */
+union cgxx_cmr_rx_stat11 {
+	u64 u;
+	struct cgxx_cmr_rx_stat11_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmr_rx_stat11_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STAT11(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STAT11(void)
+{
+	return 0xc8;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_stat12
+ *
+ * CGX Receive Status Register 12 This register provide a count of octets
+ * of dropped at the NCSI interface.
+ */
+union cgxx_cmr_rx_stat12 {
+	u64 u;
+	struct cgxx_cmr_rx_stat12_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmr_rx_stat12_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STAT12(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STAT12(void)
+{
+	return 0xd0;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_stat9
+ *
+ * CGX Receive Status Register 9 These registers provide a count of all
+ * received packets that were dropped by the DMAC1 or VLAN STEERING1
+ * filter. Packets that are dropped by the DMAC1 or VLAN STEERING1
+ * filters are counted here regardless of whether they were ERR packets,
+ * but does not include those reported in CGX()_CMR()_RX_STAT6. 16B
+ * packets or smaller (20B in case of FCS strip) as the result of
+ * truncation or other means are not dropped by CGX (unless filter and
+ * decision is also asserted) and will never appear in this count. Should
+ * the MAC signal to the CMR that the packet be filtered upon decision
+ * before the end of packet, then STAT9 and STAT10 will not be updated.
+ */
+union cgxx_cmr_rx_stat9 {
+	u64 u;
+	struct cgxx_cmr_rx_stat9_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_cmr_rx_stat9_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STAT9(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STAT9(void)
+{
+	return 0xb8;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering0#
+ *
+ * CGX CMR Receive Steering0 Registers These registers, along with
+ * CGX()_CMR_RX_STEERING_VETYPE0(), provide eight filters for identifying
+ * and steering receive traffic to X2P/NIX. Received packets are only
+ * passed to X2P/NIX when the DMAC0 filter result is ACCEPT and STEERING0
+ * filter result is PASS. See also CGX()_CMR()_RX_DMAC_CTL0.  Internal:
+ * "* ALGORITHM \<pre\> rx_steering(uint48 pkt_dmac, uint16 pkt_etype,
+ * uint16 pkt_vlan_id) {    for (int i = 0; i \< 8; i++) {       steer =
+ * CGX()_CMR_RX_STEERING0(i);       vetype =
+ * CGX()_CMR_RX_STEERING_VETYPE0(i);       if (steer[MCST_EN] ||
+ * steer[DMAC_EN] || vetype[VLAN_EN] || vetype[VLAN_TAG_EN]) {
+ * // Filter is enabled.          if (   (!steer[MCST_EN] ||
+ * is_mcst(pkt_dmac))              && (!steer[DMAC_EN] || pkt_dmac ==
+ * steer[DMAC])              && (!vetype[VLAN_EN] || pkt_vlan_id ==
+ * vetype[VLAN_ID])              && (!vetype[VLAN_TAG_EN] || pkt_etype ==
+ * vetype[VLAN_ETYPE]) )          {             // Filter match (all
+ * enabled matching criteria are met).             return steer[PASS];
+ * }       }    }    return CGX()_CMR_RX_STEERING_DEFAULT0[PASS]; // No
+ * match } \</pre\>"
+ */
+union cgxx_cmr_rx_steering0x {
+	u64 u;
+	struct cgxx_cmr_rx_steering0x_s {
+		u64 dmac                             : 48;
+		u64 dmac_en                          : 1;
+		u64 mcst_en                          : 1;
+		u64 pass                             : 1;
+		u64 reserved_51_63                   : 13;
+	} s;
+	/* struct cgxx_cmr_rx_steering0x_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING0X(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING0X(u64 a)
+{
+	return 0x300 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering1#
+ *
+ * CGX CMR Receive Steering1 Registers These registers, along with
+ * CGX()_CMR_RX_STEERING_VETYPE1(), provide eight filters for identifying
+ * and steering NCSI receive traffic. Received packets are only passed to
+ * NCSI when the DMAC1 filter result is ACCEPT and STEERING1 filter
+ * result is PASS. See also CGX()_CMR_RX_DMAC()_CAM1 and
+ * CGX()_CMR_RX_STEERING1(). For use with the LMAC associated with NCSI.
+ * See CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID].  Internal: ALGORITHM: See
+ * CGX()_CMR_RX_STEERING0().
+ */
+union cgxx_cmr_rx_steering1x {
+	u64 u;
+	struct cgxx_cmr_rx_steering1x_s {
+		u64 dmac                             : 48;
+		u64 dmac_en                          : 1;
+		u64 mcst_en                          : 1;
+		u64 pass                             : 1;
+		u64 reserved_51_63                   : 13;
+	} s;
+	/* struct cgxx_cmr_rx_steering1x_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING1X(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING1X(u64 a)
+{
+	return 0x500 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering_default0
+ *
+ * CGX CMR Receive Steering Default0 Destination Register For determining
+ * destination of traffic that does not meet matching algorithm described
+ * in registers CGX()_CMR_RX_STEERING0() and
+ * CGX()_CMR_RX_STEERING_VETYPE0(). All 16B packets or smaller (20B in
+ * case of FCS strip) as the result of truncation will steer to default
+ * destination
+ */
+union cgxx_cmr_rx_steering_default0 {
+	u64 u;
+	struct cgxx_cmr_rx_steering_default0_s {
+		u64 pass                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_cmr_rx_steering_default0_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING_DEFAULT0(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING_DEFAULT0(void)
+{
+	return 0x3f0;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering_default1
+ *
+ * CGX CMR Receive Steering Default1 Destination Register For use with
+ * the lmac_id associated with NCSI. See
+ * CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID]. For determining destination of
+ * traffic that does not meet matching algorithm described in registers
+ * CGX()_CMR_RX_STEERING1() and CGX()_CMR_RX_STEERING_VETYPE1(). All 16B
+ * packets or smaller (20B in case of FCS strip) as the result of
+ * truncation will steer to default destination
+ */
+union cgxx_cmr_rx_steering_default1 {
+	u64 u;
+	struct cgxx_cmr_rx_steering_default1_s {
+		u64 pass                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_cmr_rx_steering_default1_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING_DEFAULT1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING_DEFAULT1(void)
+{
+	return 0x5e0;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering_vetype0#
+ *
+ * CGX CMR Receive VLAN Ethertype1 Register These registers, along with
+ * CGX()_CMR_RX_STEERING0(), provide eight filters for identifying and
+ * steering X2P/NIX receive traffic.
+ */
+union cgxx_cmr_rx_steering_vetype0x {
+	u64 u;
+	struct cgxx_cmr_rx_steering_vetype0x_s {
+		u64 vlan_etype                       : 16;
+		u64 vlan_tag_en                      : 1;
+		u64 vlan_id                          : 12;
+		u64 vlan_en                          : 1;
+		u64 reserved_30_63                   : 34;
+	} s;
+	/* struct cgxx_cmr_rx_steering_vetype0x_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING_VETYPE0X(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING_VETYPE0X(u64 a)
+{
+	return 0x380 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_rx_steering_vetype1#
+ *
+ * CGX CMR Receive VLAN Ethertype1 Register For use with the lmac_id
+ * associated with NCSI. See CGX()_CMR_GLOBAL_CONFIG[NCSI_LMAC_ID]. These
+ * registers, along with CGX()_CMR_RX_STEERING1(), provide eight filters
+ * for identifying and steering NCSI receive traffic.
+ */
+union cgxx_cmr_rx_steering_vetype1x {
+	u64 u;
+	struct cgxx_cmr_rx_steering_vetype1x_s {
+		u64 vlan_etype                       : 16;
+		u64 vlan_tag_en                      : 1;
+		u64 vlan_id                          : 12;
+		u64 vlan_en                          : 1;
+		u64 reserved_30_63                   : 34;
+	} s;
+	/* struct cgxx_cmr_rx_steering_vetype1x_s cn; */
+};
+
+static inline u64 CGXX_CMR_RX_STEERING_VETYPE1X(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_RX_STEERING_VETYPE1X(u64 a)
+{
+	return 0x580 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_tx_lmacs
+ *
+ * CGX CMR Transmit Logical MACs Registers This register sets the number
+ * of LMACs allowed on the TX interface. The value is important for
+ * defining the partitioning of the transmit FIFO.
+ */
+union cgxx_cmr_tx_lmacs {
+	u64 u;
+	struct cgxx_cmr_tx_lmacs_s {
+		u64 lmacs                            : 3;
+		u64 reserved_3_63                    : 61;
+	} s;
+	/* struct cgxx_cmr_tx_lmacs_s cn; */
+};
+
+static inline u64 CGXX_CMR_TX_LMACS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_TX_LMACS(void)
+{
+	return 0x1000;
+}
+
+/**
+ * Register (RSL) cgx#_cmr_x2p#_count
+ *
+ * CGX X2P Activity Register
+ */
+union cgxx_cmr_x2px_count {
+	u64 u;
+	struct cgxx_cmr_x2px_count_s {
+		u64 x2p_cnt                          : 64;
+	} s;
+	/* struct cgxx_cmr_x2px_count_s cn; */
+};
+
+static inline u64 CGXX_CMR_X2PX_COUNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CMR_X2PX_COUNT(u64 a)
+{
+	return 0x170 + 0x1000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_const
+ *
+ * CGX CONST Registers This register contains constants for software
+ * discovery.
+ */
+union cgxx_const {
+	u64 u;
+	struct cgxx_const_s {
+		u64 tx_fifosz                        : 24;
+		u64 lmacs                            : 8;
+		u64 rx_fifosz                        : 24;
+		u64 reserved_56_63                   : 8;
+	} s;
+	/* struct cgxx_const_s cn; */
+};
+
+static inline u64 CGXX_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CONST(void)
+{
+	return 0x2000;
+}
+
+/**
+ * Register (RSL) cgx#_const1
+ *
+ * CGX CONST1 Registers This register contains constants for software
+ * discovery.
+ */
+union cgxx_const1 {
+	u64 u;
+	struct cgxx_const1_s {
+		u64 types                            : 11;
+		u64 res_types                        : 21;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_const1_s cn; */
+};
+
+static inline u64 CGXX_CONST1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_CONST1(void)
+{
+	return 0x2008;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_rx_wol_ctrl0
+ *
+ * CGX GMP GMI RX Wake-on-LAN Control 0 Registers
+ */
+union cgxx_gmp_gmix_rx_wol_ctrl0 {
+	u64 u;
+	struct cgxx_gmp_gmix_rx_wol_ctrl0_s {
+		u64 dmac                             : 48;
+		u64 pswd_len                         : 4;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct cgxx_gmp_gmix_rx_wol_ctrl0_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_RX_WOL_CTRL0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_RX_WOL_CTRL0(u64 a)
+{
+	return 0x38a00 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_rx_wol_ctrl1
+ *
+ * CGX GMP GMI RX Wake-on-LAN Control 1 Registers
+ */
+union cgxx_gmp_gmix_rx_wol_ctrl1 {
+	u64 u;
+	struct cgxx_gmp_gmix_rx_wol_ctrl1_s {
+		u64 pswd                             : 64;
+	} s;
+	/* struct cgxx_gmp_gmix_rx_wol_ctrl1_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_RX_WOL_CTRL1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_RX_WOL_CTRL1(u64 a)
+{
+	return 0x38a08 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_tx_eee
+ *
+ * INTERNAL: CGX GMP GMI TX EEE Configure Registers  Reserved. Internal:
+ * These registers control when GMP GMI TX requests to enter or exist
+ * LPI. Those registers take effect only when EEE is supported and
+ * enabled for a given LMAC.
+ */
+union cgxx_gmp_gmix_tx_eee {
+	u64 u;
+	struct cgxx_gmp_gmix_tx_eee_s {
+		u64 idle_thresh                      : 28;
+		u64 reserved_28                      : 1;
+		u64 force_lpi                        : 1;
+		u64 wakeup                           : 1;
+		u64 auto_lpi                         : 1;
+		u64 idle_cnt                         : 28;
+		u64 tx_lpi                           : 1;
+		u64 tx_lpi_wait                      : 1;
+		u64 sync_status_lpi_enable           : 1;
+		u64 reserved_63                      : 1;
+	} s;
+	/* struct cgxx_gmp_gmix_tx_eee_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_TX_EEE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_TX_EEE(u64 a)
+{
+	return 0x38800 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_tx_eee_cfg1
+ *
+ * INTERNAL: CGX GMP GMI TX EEE Configure More Configuration Registers
+ * Reserved. Internal: Controls the GMP exiting of LPI and starting to
+ * send data.
+ */
+union cgxx_gmp_gmix_tx_eee_cfg1 {
+	u64 u;
+	struct cgxx_gmp_gmix_tx_eee_cfg1_s {
+		u64 wake2data_time                   : 24;
+		u64 reserved_24_35                   : 12;
+		u64 tx_eee_enable                    : 1;
+		u64 reserved_37_39                   : 3;
+		u64 sync2lpi_time                    : 21;
+		u64 reserved_61_63                   : 3;
+	} s;
+	struct cgxx_gmp_gmix_tx_eee_cfg1_cn {
+		u64 wake2data_time                   : 24;
+		u64 reserved_24_31                   : 8;
+		u64 reserved_32_35                   : 4;
+		u64 tx_eee_enable                    : 1;
+		u64 reserved_37_39                   : 3;
+		u64 sync2lpi_time                    : 21;
+		u64 reserved_61_63                   : 3;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMIX_TX_EEE_CFG1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_TX_EEE_CFG1(u64 a)
+{
+	return 0x38808 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_wol_int
+ *
+ * CGX GMP GMI RX WOL Interrupt Registers These registers allow WOL
+ * interrupts to be sent to the control processor.
+ */
+union cgxx_gmp_gmix_wol_int {
+	u64 u;
+	struct cgxx_gmp_gmix_wol_int_s {
+		u64 wol_rcvd                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_gmp_gmix_wol_int_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_WOL_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_WOL_INT(u64 a)
+{
+	return 0x38a80 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_wol_int_ena_w1c
+ *
+ * CGX GMP GMI RX WOL Interrupt Enable Clear Registers This register
+ * clears interrupt enable bits.
+ */
+union cgxx_gmp_gmix_wol_int_ena_w1c {
+	u64 u;
+	struct cgxx_gmp_gmix_wol_int_ena_w1c_s {
+		u64 wol_rcvd                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_gmp_gmix_wol_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_WOL_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_WOL_INT_ENA_W1C(u64 a)
+{
+	return 0x38a90 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_wol_int_ena_w1s
+ *
+ * CGX GMP GMI RX WOL Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_gmp_gmix_wol_int_ena_w1s {
+	u64 u;
+	struct cgxx_gmp_gmix_wol_int_ena_w1s_s {
+		u64 wol_rcvd                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_gmp_gmix_wol_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_WOL_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_WOL_INT_ENA_W1S(u64 a)
+{
+	return 0x38a98 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi#_wol_int_w1s
+ *
+ * CGX GMP GMI RX WOL Interrupt Set Registers This register sets
+ * interrupt bits.
+ */
+union cgxx_gmp_gmix_wol_int_w1s {
+	u64 u;
+	struct cgxx_gmp_gmix_wol_int_w1s_s {
+		u64 wol_rcvd                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_gmp_gmix_wol_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMIX_WOL_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMIX_WOL_INT_W1S(u64 a)
+{
+	return 0x38a88 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_prt#_cfg
+ *
+ * CGX GMP GMI LMAC Configuration Registers This register controls the
+ * configuration of the LMAC.
+ */
+union cgxx_gmp_gmi_prtx_cfg {
+	u64 u;
+	struct cgxx_gmp_gmi_prtx_cfg_s {
+		u64 reserved_0                       : 1;
+		u64 speed                            : 1;
+		u64 duplex                           : 1;
+		u64 slottime                         : 1;
+		u64 reserved_4_7                     : 4;
+		u64 speed_msb                        : 1;
+		u64 reserved_9_11                    : 3;
+		u64 rx_idle                          : 1;
+		u64 tx_idle                          : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct cgxx_gmp_gmi_prtx_cfg_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_PRTX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_PRTX_CFG(u64 a)
+{
+	return 0x38020 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_decision
+ *
+ * CGX GMP Packet-Decision Registers This register specifies the byte
+ * count used to determine when to accept or to filter a packet. As each
+ * byte in a packet is received by GMI, the L2 byte count is compared
+ * against [CNT]. In normal operation, the L2 header begins after the
+ * PREAMBLE + SFD (CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK] = 1) and any
+ * optional UDD skip data (CGX()_GMP_GMI_RX()_UDD_SKP[LEN]).  Internal:
+ * Notes: As each byte in a packet is received by GMI, the L2 byte count
+ * is compared against the [CNT].  The L2 byte count is the number of
+ * bytes from the beginning of the L2 header (DMAC).  In normal
+ * operation, the L2 header begins after the PREAMBLE+SFD
+ * (CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK]=1) and any optional UDD skip data
+ * (CGX()_GMP_GMI_RX()_UDD_SKP[LEN]). When
+ * CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK] is clear, PREAMBLE+SFD are
+ * prepended to the packet and would require UDD skip length to account
+ * for them.  Full Duplex: _   L2 Size \<  [CNT] - Accept packet. No
+ * filtering is applied. _   L2 Size \>= [CNT] - Apply filter. Accept
+ * packet based on PAUSE packet filter.  Half Duplex: _   L2 Size \<
+ * [CNT] - Drop packet. Packet is unconditionally dropped. _   L2 Size
+ * \>= [CNT] - Accept packet.  where L2_size = MAX(0, total_packet_size -
+ * CGX()_GMP_GMI_RX()_UDD_SKP[LEN] -
+ * ((CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK]==1)*8)).
+ */
+union cgxx_gmp_gmi_rxx_decision {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_decision_s {
+		u64 cnt                              : 5;
+		u64 reserved_5_63                    : 59;
+	} s;
+	/* struct cgxx_gmp_gmi_rxx_decision_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_DECISION(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_DECISION(u64 a)
+{
+	return 0x38040 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_frm_chk
+ *
+ * CGX GMP Frame Check Registers
+ */
+union cgxx_gmp_gmi_rxx_frm_chk {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_frm_chk_s {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 reserved_2                       : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 reserved_5_6                     : 2;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct cgxx_gmp_gmi_rxx_frm_chk_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_FRM_CHK(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_FRM_CHK(u64 a)
+{
+	return 0x38030 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_frm_ctl
+ *
+ * CGX GMP Frame Control Registers This register controls the handling of
+ * the frames. The [CTL_BCK] and [CTL_DRP] bits control how the hardware
+ * handles incoming PAUSE packets. The most common modes of operation: _
+ * [CTL_BCK] = 1, [CTL_DRP] = 1: hardware handles everything. _ [CTL_BCK]
+ * = 0, [CTL_DRP] = 0: software sees all PAUSE frames. _ [CTL_BCK] = 0,
+ * [CTL_DRP] = 1: all PAUSE frames are completely ignored.  These control
+ * bits should be set to [CTL_BCK] = 0, [CTL_DRP] = 0 in half-duplex
+ * mode. Since PAUSE packets only apply to full duplex operation, any
+ * PAUSE packet would constitute an exception which should be handled by
+ * the processing cores. PAUSE packets should not be forwarded.
+ * Internal: Notes: [PRE_STRP]: When [PRE_CHK] is set (indicating that
+ * the PREAMBLE will be sent), [PRE_STRP] determines if the PREAMBLE+SFD
+ * bytes are thrown away or sent to the Octane core as part of the
+ * packet. In either mode, the PREAMBLE+SFD bytes are not counted toward
+ * the packet size when checking against the MIN and MAX bounds.
+ * Furthermore, the bytes are skipped when locating the start of the L2
+ * header for DMAC and Control frame recognition.
+ */
+union cgxx_gmp_gmi_rxx_frm_ctl {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_frm_ctl_s {
+		u64 pre_chk                          : 1;
+		u64 pre_strp                         : 1;
+		u64 ctl_drp                          : 1;
+		u64 ctl_bck                          : 1;
+		u64 ctl_mcst                         : 1;
+		u64 ctl_smac                         : 1;
+		u64 pre_free                         : 1;
+		u64 reserved_7_8                     : 2;
+		u64 pre_align                        : 1;
+		u64 null_dis                         : 1;
+		u64 reserved_11                      : 1;
+		u64 ptp_mode                         : 1;
+		u64 rx_fc_type                       : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	struct cgxx_gmp_gmi_rxx_frm_ctl_cn {
+		u64 pre_chk                          : 1;
+		u64 pre_strp                         : 1;
+		u64 ctl_drp                          : 1;
+		u64 ctl_bck                          : 1;
+		u64 ctl_mcst                         : 1;
+		u64 ctl_smac                         : 1;
+		u64 pre_free                         : 1;
+		u64 reserved_7                       : 1;
+		u64 reserved_8                       : 1;
+		u64 pre_align                        : 1;
+		u64 null_dis                         : 1;
+		u64 reserved_11                      : 1;
+		u64 ptp_mode                         : 1;
+		u64 rx_fc_type                       : 1;
+		u64 reserved_14_63                   : 50;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_FRM_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_FRM_CTL(u64 a)
+{
+	return 0x38028 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_ifg
+ *
+ * CGX GMI Minimum Interframe-Gap Cycles Registers This register
+ * specifies the minimum number of interframe-gap (IFG) cycles between
+ * packets.
+ */
+union cgxx_gmp_gmi_rxx_ifg {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_ifg_s {
+		u64 ifg                              : 4;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct cgxx_gmp_gmi_rxx_ifg_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_IFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_IFG(u64 a)
+{
+	return 0x38058 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_int
+ *
+ * CGX GMP GMI RX Interrupt Registers These registers allow interrupts to
+ * be sent to the control processor. * Exception conditions \<10:0\> can
+ * also set the rcv/opcode in the received packet's work-queue entry.
+ * CGX()_GMP_GMI_RX()_FRM_CHK provides a bit mask for configuring which
+ * conditions set the error. In half duplex operation, the expectation is
+ * that collisions will appear as either MINERR or CAREXT errors.
+ * Internal: Notes: (1) exception conditions 10:0 can also set the
+ * rcv/opcode in the received packet's workQ entry.  The
+ * CGX()_GMP_GMI_RX()_FRM_CHK register provides a bit mask for
+ * configuring which conditions set the error.  (2) in half duplex
+ * operation, the expectation is that collisions will appear as either
+ * MINERR o r CAREXT errors.  (3) JABBER An RX jabber error indicates
+ * that a packet was received which is longer than the maximum allowed
+ * packet as defined by the system.  GMI will truncate the packet at the
+ * JABBER count. Failure to do so could lead to system instabilty.  (4)
+ * NIBERR This error is illegal at 1000Mbs speeds
+ * (CGX()_GMP_GMI_PRT()_CFG[SPEED]==0) and will never assert.  (5) MINERR
+ * total frame DA+SA+TL+DATA+PAD+FCS \< 64  (6) ALNERR Indicates that the
+ * packet received was not an integer number of bytes.  If FCS checking
+ * is enabled, ALNERR will only assert if the FCS is bad.  If FCS
+ * checking is disabled, ALNERR will assert in all non-integer frame
+ * cases.  (7) Collisions Collisions can only occur in half-duplex mode.
+ * A collision is assumed by the receiver when the slottime
+ * (CGX()_GMP_GMI_PRT()_CFG[SLOTTIME]) is not satisfied.  In 10/100 mode,
+ * this will result in a frame \< SLOTTIME.  In 1000 mode, it could
+ * result either in frame \< SLOTTIME or a carrier extend error with the
+ * SLOTTIME.  These conditions are visible by... . transfer ended before
+ * slottime COLDET . carrier extend error           CAREXT  (A) LENERR
+ * Length errors occur when the received packet does not match the length
+ * field.  LENERR is only checked for packets between 64 and 1500 bytes.
+ * For untagged frames, the length must exact match.  For tagged frames
+ * the length or length+4 must match.  (B) PCTERR checks that the frame
+ * begins with a valid PREAMBLE sequence. Does not check the number of
+ * PREAMBLE cycles.  (C) OVRERR *DON'T PUT IN HRM* OVRERR is an
+ * architectural assertion check internal to GMI to make sure no
+ * assumption was violated.  In a correctly operating system, this
+ * interrupt can never fire. GMI has an internal arbiter which selects
+ * which of four ports to buffer in the main RX FIFO.  If we normally
+ * buffer eight bytes, then each port will typically push a tick every
+ * eight cycles if the packet interface is going as fast as possible.  If
+ * there are four ports, they push every two cycles.  So that's the
+ * assumption.  That the inbound module will always be able to consume
+ * the tick before another is produced.  If that doesn't happen that's
+ * when OVRERR will assert."
+ */
+union cgxx_gmp_gmi_rxx_int {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_int_s {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 ovrerr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 falerr                           : 1;
+		u64 coldet                           : 1;
+		u64 ifgerr                           : 1;
+		u64 reserved_12_63                   : 52;
+	} s;
+	struct cgxx_gmp_gmi_rxx_int_cn {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 ovrerr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 falerr                           : 1;
+		u64 coldet                           : 1;
+		u64 ifgerr                           : 1;
+		u64 reserved_12_15                   : 4;
+		u64 reserved_16_63                   : 48;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_INT(u64 a)
+{
+	return 0x38000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_int_ena_w1c
+ *
+ * CGX GMP GMI RX Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_gmp_gmi_rxx_int_ena_w1c {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_int_ena_w1c_s {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 ovrerr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 falerr                           : 1;
+		u64 coldet                           : 1;
+		u64 ifgerr                           : 1;
+		u64 reserved_12_63                   : 52;
+	} s;
+	struct cgxx_gmp_gmi_rxx_int_ena_w1c_cn {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 ovrerr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 falerr                           : 1;
+		u64 coldet                           : 1;
+		u64 ifgerr                           : 1;
+		u64 reserved_12_15                   : 4;
+		u64 reserved_16_63                   : 48;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_INT_ENA_W1C(u64 a)
+{
+	return 0x38010 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_int_ena_w1s
+ *
+ * CGX GMP GMI RX Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_gmp_gmi_rxx_int_ena_w1s {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_int_ena_w1s_s {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 ovrerr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 falerr                           : 1;
+		u64 coldet                           : 1;
+		u64 ifgerr                           : 1;
+		u64 reserved_12_63                   : 52;
+	} s;
+	struct cgxx_gmp_gmi_rxx_int_ena_w1s_cn {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 ovrerr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 falerr                           : 1;
+		u64 coldet                           : 1;
+		u64 ifgerr                           : 1;
+		u64 reserved_12_15                   : 4;
+		u64 reserved_16_63                   : 48;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_INT_ENA_W1S(u64 a)
+{
+	return 0x38018 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_int_w1s
+ *
+ * CGX GMP GMI RX Interrupt Set Registers This register sets interrupt
+ * bits.
+ */
+union cgxx_gmp_gmi_rxx_int_w1s {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_int_w1s_s {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 ovrerr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 falerr                           : 1;
+		u64 coldet                           : 1;
+		u64 ifgerr                           : 1;
+		u64 reserved_12_63                   : 52;
+	} s;
+	struct cgxx_gmp_gmi_rxx_int_w1s_cn {
+		u64 minerr                           : 1;
+		u64 carext                           : 1;
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 ovrerr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 falerr                           : 1;
+		u64 coldet                           : 1;
+		u64 ifgerr                           : 1;
+		u64 reserved_12_15                   : 4;
+		u64 reserved_16_63                   : 48;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_INT_W1S(u64 a)
+{
+	return 0x38008 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_jabber
+ *
+ * CGX GMP Maximum Packet-Size Registers This register specifies the
+ * maximum size for packets, beyond which the GMI truncates.
+ */
+union cgxx_gmp_gmi_rxx_jabber {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_jabber_s {
+		u64 cnt                              : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_gmi_rxx_jabber_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_JABBER(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_JABBER(u64 a)
+{
+	return 0x38038 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_rx#_udd_skp
+ *
+ * CGX GMP GMI User-Defined Data Skip Registers This register specifies
+ * the amount of user-defined data (UDD) added before the start of the
+ * L2C data.  Internal: Notes: (1) The skip bytes are part of the packet
+ * and will be handled by NIX.  (2) The system can determine if the UDD
+ * bytes are included in the FCS check by using the FCSSEL field - if the
+ * FCS check is enabled.  (3) Assume that the preamble/sfd is always at
+ * the start of the frame - even before UDD bytes.  In most cases, there
+ * will be no preamble in these cases since it will be packet interface
+ * in direct communication to another packet interface (MAC to MAC)
+ * without a PHY involved.  (4) We can still do address filtering and
+ * control packet filtering is the user desires.  (5)
+ * CGX()_GMP_GMI_RX()_UDD_SKP[LEN] must be 0 in half-duplex operation
+ * unless CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK] is clear.  If
+ * CGX()_GMP_GMI_RX()_FRM_CTL[PRE_CHK] is clear, then
+ * CGX()_GMP_GMI_RX()_UDD_SKP[LEN] will normally be 8.  (6) In all cases,
+ * the UDD bytes will be sent down the packet interface as part of the
+ * packet.  The UDD bytes are never stripped from the actual packet.
+ */
+union cgxx_gmp_gmi_rxx_udd_skp {
+	u64 u;
+	struct cgxx_gmp_gmi_rxx_udd_skp_s {
+		u64 len                              : 7;
+		u64 reserved_7                       : 1;
+		u64 fcssel                           : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct cgxx_gmp_gmi_rxx_udd_skp_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_RXX_UDD_SKP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_RXX_UDD_SKP(u64 a)
+{
+	return 0x38048 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_smac#
+ *
+ * CGX GMI SMAC Registers
+ */
+union cgxx_gmp_gmi_smacx {
+	u64 u;
+	struct cgxx_gmp_gmi_smacx_s {
+		u64 smac                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_gmp_gmi_smacx_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_SMACX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_SMACX(u64 a)
+{
+	return 0x38230 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_append
+ *
+ * CGX GMI TX Append Control Registers
+ */
+union cgxx_gmp_gmi_txx_append {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_append_s {
+		u64 preamble                         : 1;
+		u64 pad                              : 1;
+		u64 fcs                              : 1;
+		u64 force_fcs                        : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_append_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_APPEND(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_APPEND(u64 a)
+{
+	return 0x38218 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_burst
+ *
+ * CGX GMI TX Burst-Counter Registers
+ */
+union cgxx_gmp_gmi_txx_burst {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_burst_s {
+		u64 burst                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_burst_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_BURST(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_BURST(u64 a)
+{
+	return 0x38228 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_ctl
+ *
+ * CGX GMI Transmit Control Registers
+ */
+union cgxx_gmp_gmi_txx_ctl {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_ctl_s {
+		u64 xscol_en                         : 1;
+		u64 xsdef_en                         : 1;
+		u64 tx_fc_type                       : 1;
+		u64 link_drain                       : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_ctl_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_CTL(u64 a)
+{
+	return 0x38270 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_int
+ *
+ * CGX GMI TX Interrupt Registers
+ */
+union cgxx_gmp_gmi_txx_int {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_int_s {
+		u64 undflw                           : 1;
+		u64 xscol                            : 1;
+		u64 xsdef                            : 1;
+		u64 late_col                         : 1;
+		u64 ptp_lost                         : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	struct cgxx_gmp_gmi_txx_int_cn {
+		u64 undflw                           : 1;
+		u64 xscol                            : 1;
+		u64 xsdef                            : 1;
+		u64 late_col                         : 1;
+		u64 ptp_lost                         : 1;
+		u64 reserved_5_7                     : 3;
+		u64 reserved_8                       : 1;
+		u64 reserved_9_63                    : 55;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_INT(u64 a)
+{
+	return 0x38500 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_int_ena_w1c
+ *
+ * CGX GMI TX Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_gmp_gmi_txx_int_ena_w1c {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_int_ena_w1c_s {
+		u64 undflw                           : 1;
+		u64 xscol                            : 1;
+		u64 xsdef                            : 1;
+		u64 late_col                         : 1;
+		u64 ptp_lost                         : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	struct cgxx_gmp_gmi_txx_int_ena_w1c_cn {
+		u64 undflw                           : 1;
+		u64 xscol                            : 1;
+		u64 xsdef                            : 1;
+		u64 late_col                         : 1;
+		u64 ptp_lost                         : 1;
+		u64 reserved_5_7                     : 3;
+		u64 reserved_8                       : 1;
+		u64 reserved_9_63                    : 55;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_INT_ENA_W1C(u64 a)
+{
+	return 0x38510 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_int_ena_w1s
+ *
+ * CGX GMI TX Interrupt Enable Set Registers This register sets interrupt
+ * enable bits.
+ */
+union cgxx_gmp_gmi_txx_int_ena_w1s {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_int_ena_w1s_s {
+		u64 undflw                           : 1;
+		u64 xscol                            : 1;
+		u64 xsdef                            : 1;
+		u64 late_col                         : 1;
+		u64 ptp_lost                         : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	struct cgxx_gmp_gmi_txx_int_ena_w1s_cn {
+		u64 undflw                           : 1;
+		u64 xscol                            : 1;
+		u64 xsdef                            : 1;
+		u64 late_col                         : 1;
+		u64 ptp_lost                         : 1;
+		u64 reserved_5_7                     : 3;
+		u64 reserved_8                       : 1;
+		u64 reserved_9_63                    : 55;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_INT_ENA_W1S(u64 a)
+{
+	return 0x38518 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_int_w1s
+ *
+ * CGX GMI TX Interrupt Set Registers This register sets interrupt bits.
+ */
+union cgxx_gmp_gmi_txx_int_w1s {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_int_w1s_s {
+		u64 undflw                           : 1;
+		u64 xscol                            : 1;
+		u64 xsdef                            : 1;
+		u64 late_col                         : 1;
+		u64 ptp_lost                         : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	struct cgxx_gmp_gmi_txx_int_w1s_cn {
+		u64 undflw                           : 1;
+		u64 xscol                            : 1;
+		u64 xsdef                            : 1;
+		u64 late_col                         : 1;
+		u64 ptp_lost                         : 1;
+		u64 reserved_5_7                     : 3;
+		u64 reserved_8                       : 1;
+		u64 reserved_9_63                    : 55;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_INT_W1S(u64 a)
+{
+	return 0x38508 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_min_pkt
+ *
+ * CGX GMI TX Minimum-Size-Packet Registers
+ */
+union cgxx_gmp_gmi_txx_min_pkt {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_min_pkt_s {
+		u64 min_size                         : 8;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_min_pkt_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_MIN_PKT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_MIN_PKT(u64 a)
+{
+	return 0x38240 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_pause_pkt_interval
+ *
+ * CGX GMI TX PAUSE-Packet Transmission-Interval Registers This register
+ * specifies how often PAUSE packets are sent. Internal: Notes: Choosing
+ * proper values of CGX()_GMP_GMI_TX()_PAUSE_PKT_TIME[PTIME] and
+ * CGX()_GMP_GMI_TX()_PAUSE_PKT_INTERVAL[INTERVAL] can be challenging to
+ * the system designer.  It is suggested that TIME be much greater than
+ * INTERVAL and CGX()_GMP_GMI_TX()_PAUSE_ZERO[SEND] be set.  This allows
+ * a periodic refresh of the PAUSE count and then when the backpressure
+ * condition is lifted, a PAUSE packet with TIME==0 will be sent
+ * indicating that Octane is ready for additional data.  If the system
+ * chooses to not set CGX()_GMP_GMI_TX()_PAUSE_ZERO[SEND], then it is
+ * suggested that TIME and INTERVAL are programmed such that they
+ * satisify the following rule:  _ INTERVAL \<= TIME - (largest_pkt_size
+ * + IFG + pause_pkt_size)  where largest_pkt_size is that largest packet
+ * that the system can send (normally 1518B), IFG is the interframe gap
+ * and pause_pkt_size is the size of the PAUSE packet (normally 64B).
+ */
+union cgxx_gmp_gmi_txx_pause_pkt_interval {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_pause_pkt_interval_s {
+		u64 interval                         : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_pause_pkt_interval_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_PKT_INTERVAL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_PKT_INTERVAL(u64 a)
+{
+	return 0x38248 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_pause_pkt_time
+ *
+ * CGX GMI TX PAUSE Packet PAUSE-Time Registers
+ */
+union cgxx_gmp_gmi_txx_pause_pkt_time {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_pause_pkt_time_s {
+		u64 ptime                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_pause_pkt_time_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_PKT_TIME(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_PKT_TIME(u64 a)
+{
+	return 0x38238 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_pause_togo
+ *
+ * CGX GMI TX Time-to-Backpressure Registers
+ */
+union cgxx_gmp_gmi_txx_pause_togo {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_pause_togo_s {
+		u64 ptime                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_pause_togo_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_TOGO(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_TOGO(u64 a)
+{
+	return 0x38258 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_pause_zero
+ *
+ * CGX GMI TX PAUSE-Zero-Enable Registers
+ */
+union cgxx_gmp_gmi_txx_pause_zero {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_pause_zero_s {
+		u64 send                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_pause_zero_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_ZERO(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_PAUSE_ZERO(u64 a)
+{
+	return 0x38260 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_sgmii_ctl
+ *
+ * CGX SGMII Control Registers
+ */
+union cgxx_gmp_gmi_txx_sgmii_ctl {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_sgmii_ctl_s {
+		u64 align                            : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_sgmii_ctl_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_SGMII_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_SGMII_CTL(u64 a)
+{
+	return 0x38300 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_slot
+ *
+ * CGX GMI TX Slottime Counter Registers
+ */
+union cgxx_gmp_gmi_txx_slot {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_slot_s {
+		u64 slot                             : 10;
+		u64 reserved_10_63                   : 54;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_slot_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_SLOT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_SLOT(u64 a)
+{
+	return 0x38220 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_soft_pause
+ *
+ * CGX GMI TX Software PAUSE Registers
+ */
+union cgxx_gmp_gmi_txx_soft_pause {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_soft_pause_s {
+		u64 ptime                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_soft_pause_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_SOFT_PAUSE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_SOFT_PAUSE(u64 a)
+{
+	return 0x38250 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx#_thresh
+ *
+ * CGX GMI TX Threshold Registers
+ */
+union cgxx_gmp_gmi_txx_thresh {
+	u64 u;
+	struct cgxx_gmp_gmi_txx_thresh_s {
+		u64 cnt                              : 11;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct cgxx_gmp_gmi_txx_thresh_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TXX_THRESH(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TXX_THRESH(u64 a)
+{
+	return 0x38210 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_col_attempt
+ *
+ * CGX TX Collision Attempts Before Dropping Frame Registers
+ */
+union cgxx_gmp_gmi_tx_col_attempt {
+	u64 u;
+	struct cgxx_gmp_gmi_tx_col_attempt_s {
+		u64 limit                            : 5;
+		u64 reserved_5_63                    : 59;
+	} s;
+	/* struct cgxx_gmp_gmi_tx_col_attempt_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_COL_ATTEMPT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_COL_ATTEMPT(void)
+{
+	return 0x39010;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_ifg
+ *
+ * CGX GMI TX Interframe-Gap Cycles Registers Consider the following when
+ * programming IFG1 and IFG2: * For 10/100/1000 Mb/s half-duplex systems
+ * that require IEEE 802.3 compatibility, IFG1 must be in the range of
+ * 1-8, [IFG2] must be in the range of 4-12, and the [IFG1] + [IFG2] sum
+ * must be 12. * For 10/100/1000 Mb/s full-duplex systems that require
+ * IEEE 802.3 compatibility, IFG1 must be in the range of 1-11, [IFG2]
+ * must be in the range of 1-11, and the [IFG1] + [IFG2] sum must be 12.
+ * For all other systems, IFG1 and IFG2 can be any value in the range of
+ * 1-15, allowing for a total possible IFG sum of 2-30.
+ */
+union cgxx_gmp_gmi_tx_ifg {
+	u64 u;
+	struct cgxx_gmp_gmi_tx_ifg_s {
+		u64 ifg1                             : 4;
+		u64 ifg2                             : 4;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct cgxx_gmp_gmi_tx_ifg_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_IFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_IFG(void)
+{
+	return 0x39000;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_jam
+ *
+ * CGX GMI TX JAM Pattern Registers This register provides the pattern
+ * used in JAM bytes.
+ */
+union cgxx_gmp_gmi_tx_jam {
+	u64 u;
+	struct cgxx_gmp_gmi_tx_jam_s {
+		u64 jam                              : 8;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct cgxx_gmp_gmi_tx_jam_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_JAM(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_JAM(void)
+{
+	return 0x39008;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_lfsr
+ *
+ * CGX GMI TX LFSR Registers This register shows the contents of the
+ * linear feedback shift register (LFSR), which is used to implement
+ * truncated binary exponential backoff.
+ */
+union cgxx_gmp_gmi_tx_lfsr {
+	u64 u;
+	struct cgxx_gmp_gmi_tx_lfsr_s {
+		u64 lfsr                             : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_gmi_tx_lfsr_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_LFSR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_LFSR(void)
+{
+	return 0x39028;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_pause_pkt_dmac
+ *
+ * CGX TX PAUSE-Packet DMAC-Field Registers
+ */
+union cgxx_gmp_gmi_tx_pause_pkt_dmac {
+	u64 u;
+	struct cgxx_gmp_gmi_tx_pause_pkt_dmac_s {
+		u64 dmac                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_gmp_gmi_tx_pause_pkt_dmac_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_PAUSE_PKT_DMAC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_PAUSE_PKT_DMAC(void)
+{
+	return 0x39018;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_gmi_tx_pause_pkt_type
+ *
+ * CGX GMI TX PAUSE-Packet-PTYPE Field Registers This register provides
+ * the PTYPE field that is placed in outbound PAUSE packets.
+ */
+union cgxx_gmp_gmi_tx_pause_pkt_type {
+	u64 u;
+	struct cgxx_gmp_gmi_tx_pause_pkt_type_s {
+		u64 ptype                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_gmi_tx_pause_pkt_type_s cn; */
+};
+
+static inline u64 CGXX_GMP_GMI_TX_PAUSE_PKT_TYPE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_GMI_TX_PAUSE_PKT_TYPE(void)
+{
+	return 0x39020;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_misc#_cfg
+ *
+ * CGX GMP PCS Miscellaneous Control Registers This register contains
+ * general configuration that should not need to be changed from reset
+ * settings.  Internal: Per lmac diagnostic and chicken bits.
+ */
+union cgxx_gmp_miscx_cfg {
+	u64 u;
+	struct cgxx_gmp_miscx_cfg_s {
+		u64 tx_eee_quiet_credit_mode         : 1;
+		u64 tx_eee_wait_gmi_fast_idle        : 1;
+		u64 tx_qsgmii_port0_init             : 1;
+		u64 tx_eee_rx_sync_status_enable     : 1;
+		u64 pcs_alt_an                       : 1;
+		u64 reserved_5_7                     : 3;
+		u64 rx_pcs_sync_signal_detect        : 1;
+		u64 rx_pcs_sync_timeout              : 1;
+		u64 rx_pcs_eee_mode_enable           : 1;
+		u64 rx_pcs_lpi_enable                : 1;
+		u64 rx_pcs_802_rx_k                  : 1;
+		u64 rx_pcs_alt_qlb2i                 : 1;
+		u64 reserved_14_15                   : 2;
+		u64 rx_cgp_gser_throttle             : 1;
+		u64 rx_cgp_edet_filter               : 1;
+		u64 rx_cgp_edet_qlm_val              : 1;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct cgxx_gmp_miscx_cfg_s cn; */
+};
+
+static inline u64 CGXX_GMP_MISCX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_MISCX_CFG(u64 a)
+{
+	return 0x34000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_an_expansion
+ *
+ * CGX GMP PCS AN Expansion register Register 6 AN status
+ */
+union cgxx_gmp_pcsx_an_expansion {
+	u64 u;
+	struct cgxx_gmp_pcsx_an_expansion_s {
+		u64 reserved_0                       : 1;
+		u64 page_received                    : 1;
+		u64 next_page_able                   : 1;
+		u64 reserved_3_63                    : 61;
+	} s;
+	/* struct cgxx_gmp_pcsx_an_expansion_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_AN_EXPANSION(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_AN_EXPANSION(u64 a)
+{
+	return 0x30a60 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_an_lp_abil_np
+ *
+ * CGX GMP PCS AN Link Partner Ability Next Page Register 8 This register
+ * contains the advertised ability of the link partners Next Page. The
+ * definition for this register is provided in 32.5.4.2 for changes to
+ * 28.2.4.1.4.
+ */
+union cgxx_gmp_pcsx_an_lp_abil_np {
+	u64 u;
+	struct cgxx_gmp_pcsx_an_lp_abil_np_s {
+		u64 m_u                              : 11;
+		u64 toggle                           : 1;
+		u64 ack2                             : 1;
+		u64 mp                               : 1;
+		u64 ack                              : 1;
+		u64 np                               : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcsx_an_lp_abil_np_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_AN_LP_ABIL_NP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_AN_LP_ABIL_NP(u64 a)
+{
+	return 0x30a80 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_an_np_tx
+ *
+ * CGX GMP PCS AN Next Page Transmit Register 7 Software programs this
+ * register with the contents of the AN message next page or unformatted
+ * next page link code word to be transmitted during autonegotiation.
+ * Next page exchange occurs after the base link code words have been
+ * exchanged if either end of the link segment sets the NP bit to 1,
+ * indicating that it has at least one next page to send. Once initiated,
+ * next page exchange continues until both ends of the link segment set
+ * their NP bits to 0. Both sides must be NP capable to use NP exchanges.
+ */
+union cgxx_gmp_pcsx_an_np_tx {
+	u64 u;
+	struct cgxx_gmp_pcsx_an_np_tx_s {
+		u64 m_u                              : 11;
+		u64 toggle                           : 1;
+		u64 ack2                             : 1;
+		u64 mp                               : 1;
+		u64 ack                              : 1;
+		u64 np                               : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcsx_an_np_tx_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_AN_NP_TX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_AN_NP_TX(u64 a)
+{
+	return 0x30a70 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_dbg_control
+ *
+ * CGX PCS Debug Control Registers
+ */
+union cgxx_gmp_pcsx_dbg_control {
+	u64 u;
+	struct cgxx_gmp_pcsx_dbg_control_s {
+		u64 us_clk_period                    : 7;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_gmp_pcsx_dbg_control_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_DBG_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_DBG_CONTROL(u64 a)
+{
+	return 0x31000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_rx_eee_wake
+ *
+ * INTERNAL: CGX GMP PCS  RX EEE Wake Error Counter  Registers  Reserved.
+ * Internal: This register is used by PHY types that support EEE to count
+ * wake time faults where the PHY fails to complete its normal wake
+ * sequence within the time required for the specific PHY type. The
+ * definition of the fault event to be counted is defined for each PHY
+ * and may occur during a refresh or a wake-up as defined by the PHY.
+ * This 16-bit counter shall be reset to all zeros upon execution of the
+ * PCS reset. This counter shall be held at all ones in the case of
+ * overflow.
+ */
+union cgxx_gmp_pcsx_rx_eee_wake {
+	u64 u;
+	struct cgxx_gmp_pcsx_rx_eee_wake_s {
+		u64 error_counter                    : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcsx_rx_eee_wake_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_RX_EEE_WAKE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_RX_EEE_WAKE(u64 a)
+{
+	return 0x30910 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_rx_lpi_timing
+ *
+ * INTERNAL: CGX GMP PCS  RX EEE LPI Timing Parameters Registers
+ * Reserved. Internal: Receiver LPI timing parameters Tqr, Twr and Twtf.
+ */
+union cgxx_gmp_pcsx_rx_lpi_timing {
+	u64 u;
+	struct cgxx_gmp_pcsx_rx_lpi_timing_s {
+		u64 twtf                             : 18;
+		u64 reserved_18_19                   : 2;
+		u64 twr                              : 12;
+		u64 tqr                              : 20;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct cgxx_gmp_pcsx_rx_lpi_timing_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_RX_LPI_TIMING(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_RX_LPI_TIMING(u64 a)
+{
+	return 0x30900 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_status1
+ *
+ * CGX GMP PCS Status 1 Register PCS LPI Status, Link OK.  Register 3.1
+ */
+union cgxx_gmp_pcsx_status1 {
+	u64 u;
+	struct cgxx_gmp_pcsx_status1_s {
+		u64 reserved_0_1                     : 2;
+		u64 receive_link_status              : 1;
+		u64 reserved_3_7                     : 5;
+		u64 rx_lpi_indication                : 1;
+		u64 tx_lpi_indication                : 1;
+		u64 rx_lpi_received                  : 1;
+		u64 tx_lpi_received                  : 1;
+		u64 reserved_12_63                   : 52;
+	} s;
+	/* struct cgxx_gmp_pcsx_status1_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_STATUS1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_STATUS1(u64 a)
+{
+	return 0x30880 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs#_tx_lpi_timing
+ *
+ * INTERNAL: CGX GMP GMI  TX EEE LPI Timing Parameters Registers
+ * Reserved. Internal: Transmitter LPI timing parameters Tsl, Tql and
+ * Tul.
+ */
+union cgxx_gmp_pcsx_tx_lpi_timing {
+	u64 u;
+	struct cgxx_gmp_pcsx_tx_lpi_timing_s {
+		u64 tql                              : 19;
+		u64 reserved_19_31                   : 13;
+		u64 tul                              : 12;
+		u64 reserved_44_47                   : 4;
+		u64 tsl                              : 12;
+		u64 reserved_60_63                   : 4;
+	} s;
+	/* struct cgxx_gmp_pcsx_tx_lpi_timing_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCSX_TX_LPI_TIMING(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCSX_TX_LPI_TIMING(u64 a)
+{
+	return 0x30800 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_an#_adv
+ *
+ * CGX GMP PCS Autonegotiation Advertisement Registers
+ */
+union cgxx_gmp_pcs_anx_adv {
+	u64 u;
+	struct cgxx_gmp_pcs_anx_adv_s {
+		u64 reserved_0_4                     : 5;
+		u64 fd                               : 1;
+		u64 hfd                              : 1;
+		u64 pause                            : 2;
+		u64 reserved_9_11                    : 3;
+		u64 rem_flt                          : 2;
+		u64 reserved_14                      : 1;
+		u64 np                               : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcs_anx_adv_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_ANX_ADV(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_ANX_ADV(u64 a)
+{
+	return 0x30010 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_an#_ext_st
+ *
+ * CGX GMO PCS Autonegotiation Extended Status Registers
+ */
+union cgxx_gmp_pcs_anx_ext_st {
+	u64 u;
+	struct cgxx_gmp_pcs_anx_ext_st_s {
+		u64 reserved_0_11                    : 12;
+		u64 thou_thd                         : 1;
+		u64 thou_tfd                         : 1;
+		u64 thou_xhd                         : 1;
+		u64 thou_xfd                         : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcs_anx_ext_st_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_ANX_EXT_ST(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_ANX_EXT_ST(u64 a)
+{
+	return 0x30028 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_an#_lp_abil
+ *
+ * CGX GMP PCS Autonegotiation Link Partner Ability Registers This is the
+ * autonegotiation link partner ability register 5 as per IEEE 802.3,
+ * Clause 37.
+ */
+union cgxx_gmp_pcs_anx_lp_abil {
+	u64 u;
+	struct cgxx_gmp_pcs_anx_lp_abil_s {
+		u64 reserved_0_4                     : 5;
+		u64 fd                               : 1;
+		u64 hfd                              : 1;
+		u64 pause                            : 2;
+		u64 reserved_9_11                    : 3;
+		u64 rem_flt                          : 2;
+		u64 ack                              : 1;
+		u64 np                               : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcs_anx_lp_abil_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_ANX_LP_ABIL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_ANX_LP_ABIL(u64 a)
+{
+	return 0x30018 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_an#_results
+ *
+ * CGX GMP PCS Autonegotiation Results Registers This register is not
+ * valid when CGX()_GMP_PCS_MISC()_CTL[AN_OVRD] is set to 1. If
+ * CGX()_GMP_PCS_MISC()_CTL[AN_OVRD] is set to 0 and
+ * CGX()_GMP_PCS_AN()_RESULTS[AN_CPT] is set to 1, this register is
+ * valid.
+ */
+union cgxx_gmp_pcs_anx_results {
+	u64 u;
+	struct cgxx_gmp_pcs_anx_results_s {
+		u64 link_ok                          : 1;
+		u64 dup                              : 1;
+		u64 an_cpt                           : 1;
+		u64 spd                              : 2;
+		u64 pause                            : 2;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_gmp_pcs_anx_results_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_ANX_RESULTS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_ANX_RESULTS(u64 a)
+{
+	return 0x30020 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_int#
+ *
+ * CGX GMP PCS Interrupt Registers
+ */
+union cgxx_gmp_pcs_intx {
+	u64 u;
+	struct cgxx_gmp_pcs_intx_s {
+		u64 lnkspd                           : 1;
+		u64 xmit                             : 1;
+		u64 an_err                           : 1;
+		u64 txfifu                           : 1;
+		u64 txfifo                           : 1;
+		u64 txbad                            : 1;
+		u64 rxerr                            : 1;
+		u64 rxbad                            : 1;
+		u64 rxlock                           : 1;
+		u64 an_bad                           : 1;
+		u64 sync_bad                         : 1;
+		u64 dup                              : 1;
+		u64 dbg_sync                         : 1;
+		u64 reserved_13_15                   : 3;
+		u64 an_page_received                 : 1;
+		u64 an_complete                      : 1;
+		u64 reserved_18_19                   : 2;
+		u64 eee_tx_change                    : 1;
+		u64 eee_rx_change                    : 1;
+		u64 eee_rx_link_fail                 : 1;
+		u64 reserved_23_63                   : 41;
+	} s;
+	/* struct cgxx_gmp_pcs_intx_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_INTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_INTX(u64 a)
+{
+	return 0x30080 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_int#_ena_w1c
+ *
+ * CGX GMP PCS Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_gmp_pcs_intx_ena_w1c {
+	u64 u;
+	struct cgxx_gmp_pcs_intx_ena_w1c_s {
+		u64 lnkspd                           : 1;
+		u64 xmit                             : 1;
+		u64 an_err                           : 1;
+		u64 txfifu                           : 1;
+		u64 txfifo                           : 1;
+		u64 txbad                            : 1;
+		u64 rxerr                            : 1;
+		u64 rxbad                            : 1;
+		u64 rxlock                           : 1;
+		u64 an_bad                           : 1;
+		u64 sync_bad                         : 1;
+		u64 dup                              : 1;
+		u64 dbg_sync                         : 1;
+		u64 reserved_13_15                   : 3;
+		u64 an_page_received                 : 1;
+		u64 an_complete                      : 1;
+		u64 reserved_18_19                   : 2;
+		u64 eee_tx_change                    : 1;
+		u64 eee_rx_change                    : 1;
+		u64 eee_rx_link_fail                 : 1;
+		u64 reserved_23_63                   : 41;
+	} s;
+	/* struct cgxx_gmp_pcs_intx_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_INTX_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_INTX_ENA_W1C(u64 a)
+{
+	return 0x30090 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_int#_ena_w1s
+ *
+ * CGX GMP PCS Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_gmp_pcs_intx_ena_w1s {
+	u64 u;
+	struct cgxx_gmp_pcs_intx_ena_w1s_s {
+		u64 lnkspd                           : 1;
+		u64 xmit                             : 1;
+		u64 an_err                           : 1;
+		u64 txfifu                           : 1;
+		u64 txfifo                           : 1;
+		u64 txbad                            : 1;
+		u64 rxerr                            : 1;
+		u64 rxbad                            : 1;
+		u64 rxlock                           : 1;
+		u64 an_bad                           : 1;
+		u64 sync_bad                         : 1;
+		u64 dup                              : 1;
+		u64 dbg_sync                         : 1;
+		u64 reserved_13_15                   : 3;
+		u64 an_page_received                 : 1;
+		u64 an_complete                      : 1;
+		u64 reserved_18_19                   : 2;
+		u64 eee_tx_change                    : 1;
+		u64 eee_rx_change                    : 1;
+		u64 eee_rx_link_fail                 : 1;
+		u64 reserved_23_63                   : 41;
+	} s;
+	/* struct cgxx_gmp_pcs_intx_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_INTX_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_INTX_ENA_W1S(u64 a)
+{
+	return 0x30098 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_int#_w1s
+ *
+ * CGX GMP PCS Interrupt Set Registers This register sets interrupt bits.
+ */
+union cgxx_gmp_pcs_intx_w1s {
+	u64 u;
+	struct cgxx_gmp_pcs_intx_w1s_s {
+		u64 lnkspd                           : 1;
+		u64 xmit                             : 1;
+		u64 an_err                           : 1;
+		u64 txfifu                           : 1;
+		u64 txfifo                           : 1;
+		u64 txbad                            : 1;
+		u64 rxerr                            : 1;
+		u64 rxbad                            : 1;
+		u64 rxlock                           : 1;
+		u64 an_bad                           : 1;
+		u64 sync_bad                         : 1;
+		u64 dup                              : 1;
+		u64 dbg_sync                         : 1;
+		u64 reserved_13_15                   : 3;
+		u64 an_page_received                 : 1;
+		u64 an_complete                      : 1;
+		u64 reserved_18_19                   : 2;
+		u64 eee_tx_change                    : 1;
+		u64 eee_rx_change                    : 1;
+		u64 eee_rx_link_fail                 : 1;
+		u64 reserved_23_63                   : 41;
+	} s;
+	/* struct cgxx_gmp_pcs_intx_w1s_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_INTX_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_INTX_W1S(u64 a)
+{
+	return 0x30088 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_link#_timer
+ *
+ * CGX GMP PCS Link Timer Registers This is the 1.6 ms nominal link timer
+ * register.
+ */
+union cgxx_gmp_pcs_linkx_timer {
+	u64 u;
+	struct cgxx_gmp_pcs_linkx_timer_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcs_linkx_timer_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_LINKX_TIMER(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_LINKX_TIMER(u64 a)
+{
+	return 0x30040 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_misc#_ctl
+ *
+ * CGX GMP SGMII Miscellaneous Control Registers Internal: SGMII bit [12]
+ * is really a misnomer, it is a decode  of pi_qlm_cfg pins to indicate
+ * SGMII or 1000Base-X modes.  Note: The SGMII AN Advertisement Register
+ * above will be sent during Auto Negotiation if [MAC_PHY] is set (1=PHY
+ * mode). If the bit is not set (0=MAC mode), the tx_Config_Reg\<14\>
+ * becomes ACK bit and tx_Config_Reg\<0\> is always 1. All other bits in
+ * tx_Config_Reg sent will be 0. The PHY dictates the Auto Negotiation
+ * results.
+ */
+union cgxx_gmp_pcs_miscx_ctl {
+	u64 u;
+	struct cgxx_gmp_pcs_miscx_ctl_s {
+		u64 samp_pt                          : 7;
+		u64 an_ovrd                          : 1;
+		u64 mode                             : 1;
+		u64 mac_phy                          : 1;
+		u64 loopbck2                         : 1;
+		u64 gmxeno                           : 1;
+		u64 reserved_12                      : 1;
+		u64 disp_en                          : 1;
+		u64 reserved_14_15                   : 2;
+		u64 qsgmii_comma_wd                  : 16;
+		u64 qsgmii_comma_wd_en               : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	struct cgxx_gmp_pcs_miscx_ctl_cn {
+		u64 samp_pt                          : 7;
+		u64 an_ovrd                          : 1;
+		u64 mode                             : 1;
+		u64 mac_phy                          : 1;
+		u64 loopbck2                         : 1;
+		u64 gmxeno                           : 1;
+		u64 reserved_12                      : 1;
+		u64 disp_en                          : 1;
+		u64 reserved_14_15                   : 2;
+		u64 qsgmii_comma_wd                  : 16;
+		u64 qsgmii_comma_wd_en               : 1;
+		u64 reserved_33_35                   : 3;
+		u64 reserved_36_63                   : 28;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_PCS_MISCX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_MISCX_CTL(u64 a)
+{
+	return 0x30078 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_mr#_control
+ *
+ * CGX GMP PCS Control Registers
+ */
+union cgxx_gmp_pcs_mrx_control {
+	u64 u;
+	struct cgxx_gmp_pcs_mrx_control_s {
+		u64 reserved_0_4                     : 5;
+		u64 uni                              : 1;
+		u64 spdmsb                           : 1;
+		u64 coltst                           : 1;
+		u64 dup                              : 1;
+		u64 rst_an                           : 1;
+		u64 reserved_10                      : 1;
+		u64 pwr_dn                           : 1;
+		u64 an_en                            : 1;
+		u64 spdlsb                           : 1;
+		u64 loopbck1                         : 1;
+		u64 reset                            : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcs_mrx_control_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_MRX_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_MRX_CONTROL(u64 a)
+{
+	return 0x30000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_mr#_status
+ *
+ * CGX GMP PCS Status Registers Bits \<15:9\> in this register indicate
+ * the ability to operate when CGX()_GMP_PCS_MISC()_CTL[MAC_PHY] is set
+ * to MAC mode. Bits \<15:9\> are always read as 0, indicating that the
+ * chip cannot operate in the corresponding modes. The field [RM_FLT] is
+ * a 'don't care' when the selected mode is SGMII/QSGMII.
+ */
+union cgxx_gmp_pcs_mrx_status {
+	u64 u;
+	struct cgxx_gmp_pcs_mrx_status_s {
+		u64 extnd                            : 1;
+		u64 reserved_1                       : 1;
+		u64 lnk_st                           : 1;
+		u64 an_abil                          : 1;
+		u64 rm_flt                           : 1;
+		u64 an_cpt                           : 1;
+		u64 prb_sup                          : 1;
+		u64 reserved_7                       : 1;
+		u64 ext_st                           : 1;
+		u64 hun_t2hd                         : 1;
+		u64 hun_t2fd                         : 1;
+		u64 ten_hd                           : 1;
+		u64 ten_fd                           : 1;
+		u64 hun_xhd                          : 1;
+		u64 hun_xfd                          : 1;
+		u64 hun_t4                           : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcs_mrx_status_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_MRX_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_MRX_STATUS(u64 a)
+{
+	return 0x30008 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_rx#_states
+ *
+ * CGX GMP PCS RX State-Machines States Registers
+ */
+union cgxx_gmp_pcs_rxx_states {
+	u64 u;
+	struct cgxx_gmp_pcs_rxx_states_s {
+		u64 an_st                            : 4;
+		u64 an_bad                           : 1;
+		u64 sync                             : 4;
+		u64 sync_bad                         : 1;
+		u64 rx_st                            : 5;
+		u64 rx_bad                           : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcs_rxx_states_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_RXX_STATES(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_RXX_STATES(u64 a)
+{
+	return 0x30058 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_rx#_sync
+ *
+ * CGX GMP PCS Code Group Synchronization Registers
+ */
+union cgxx_gmp_pcs_rxx_sync {
+	u64 u;
+	struct cgxx_gmp_pcs_rxx_sync_s {
+		u64 bit_lock                         : 1;
+		u64 sync                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct cgxx_gmp_pcs_rxx_sync_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_RXX_SYNC(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_RXX_SYNC(u64 a)
+{
+	return 0x30050 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_sgm#_an_adv
+ *
+ * CGX GMP PCS SGMII Autonegotiation Advertisement Registers This is the
+ * SGMII autonegotiation advertisement register (sent out as
+ * tx_Config_Reg\<15:0\> as defined in IEEE 802.3 clause 37). This
+ * register is sent during autonegotiation if
+ * CGX()_GMP_PCS_MISC()_CTL[MAC_PHY] is set (1 = PHY mode). If the bit is
+ * not set (0 = MAC mode), then tx_Config_Reg\<14\> becomes ACK bit and
+ * tx_Config_Reg\<0\> is always 1. All other bits in tx_Config_Reg sent
+ * will be 0. The PHY dictates the autonegotiation results.
+ */
+union cgxx_gmp_pcs_sgmx_an_adv {
+	u64 u;
+	struct cgxx_gmp_pcs_sgmx_an_adv_s {
+		u64 one                              : 1;
+		u64 reserved_1_9                     : 9;
+		u64 speed                            : 2;
+		u64 dup                              : 1;
+		u64 reserved_13                      : 1;
+		u64 ack                              : 1;
+		u64 link                             : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_gmp_pcs_sgmx_an_adv_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_SGMX_AN_ADV(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_SGMX_AN_ADV(u64 a)
+{
+	return 0x30068 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_sgm#_lp_adv
+ *
+ * CGX GMP PCS SGMII Link-Partner-Advertisement Registers This is the
+ * SGMII link partner advertisement register (received as
+ * rx_Config_Reg\<15:0\> as defined in IEEE 802.3 clause 37).
+ */
+union cgxx_gmp_pcs_sgmx_lp_adv {
+	u64 u;
+	struct cgxx_gmp_pcs_sgmx_lp_adv_s {
+		u64 one                              : 1;
+		u64 reserved_1_9                     : 9;
+		u64 speed                            : 2;
+		u64 dup                              : 1;
+		u64 reserved_13_14                   : 2;
+		u64 link                             : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	struct cgxx_gmp_pcs_sgmx_lp_adv_cn {
+		u64 one                              : 1;
+		u64 reserved_1_9                     : 9;
+		u64 speed                            : 2;
+		u64 dup                              : 1;
+		u64 reserved_13                      : 1;
+		u64 reserved_14                      : 1;
+		u64 link                             : 1;
+		u64 reserved_16_63                   : 48;
+	} cn;
+};
+
+static inline u64 CGXX_GMP_PCS_SGMX_LP_ADV(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_SGMX_LP_ADV(u64 a)
+{
+	return 0x30070 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_tx#_states
+ *
+ * CGX GMP PCS TX State-Machines States Registers
+ */
+union cgxx_gmp_pcs_txx_states {
+	u64 u;
+	struct cgxx_gmp_pcs_txx_states_s {
+		u64 ord_st                           : 4;
+		u64 tx_bad                           : 1;
+		u64 xmit                             : 2;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_gmp_pcs_txx_states_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_TXX_STATES(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_TXX_STATES(u64 a)
+{
+	return 0x30060 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_gmp_pcs_tx_rx#_polarity
+ *
+ * CGX GMP PCS TX/RX Polarity Registers
+ * CGX()_GMP_PCS_TX_RX()_POLARITY[AUTORXPL] shows correct polarity needed
+ * on the link receive path after code group synchronization is achieved.
+ * When LMAC_TYPE=QSGMII, only lane 0 polarity data and settings are
+ * relevant and settings for lanes 1, 2 and 3 are unused.
+ */
+union cgxx_gmp_pcs_tx_rxx_polarity {
+	u64 u;
+	struct cgxx_gmp_pcs_tx_rxx_polarity_s {
+		u64 txplrt                           : 1;
+		u64 rxplrt                           : 1;
+		u64 autorxpl                         : 1;
+		u64 rxovrd                           : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct cgxx_gmp_pcs_tx_rxx_polarity_s cn; */
+};
+
+static inline u64 CGXX_GMP_PCS_TX_RXX_POLARITY(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_GMP_PCS_TX_RXX_POLARITY(u64 a)
+{
+	return 0x30048 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_msix_pba#
+ *
+ * CGX MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table, the bit number is indexed by the CGX_INT_VEC_E enumeration.
+ */
+union cgxx_msix_pbax {
+	u64 u;
+	struct cgxx_msix_pbax_s {
+		u64 pend                             : 64;
+	} s;
+	/* struct cgxx_msix_pbax_s cn; */
+};
+
+static inline u64 CGXX_MSIX_PBAX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_MSIX_PBAX(u64 a)
+{
+	return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_msix_vec#_addr
+ *
+ * CGX MSI-X Vector Table Address Registers This register is the MSI-X
+ * vector table, indexed by the CGX_INT_VEC_E enumeration.
+ */
+union cgxx_msix_vecx_addr {
+	u64 u;
+	struct cgxx_msix_vecx_addr_s {
+		u64 secvec                           : 1;
+		u64 reserved_1                       : 1;
+		u64 addr                             : 51;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct cgxx_msix_vecx_addr_s cn; */
+};
+
+static inline u64 CGXX_MSIX_VECX_ADDR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_MSIX_VECX_ADDR(u64 a)
+{
+	return 0 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) cgx#_msix_vec#_ctl
+ *
+ * CGX MSI-X Vector Table Control and Data Registers This register is the
+ * MSI-X vector table, indexed by the CGX_INT_VEC_E enumeration.
+ */
+union cgxx_msix_vecx_ctl {
+	u64 u;
+	struct cgxx_msix_vecx_ctl_s {
+		u64 data                             : 32;
+		u64 mask                             : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct cgxx_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 CGXX_MSIX_VECX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_MSIX_VECX_CTL(u64 a)
+{
+	return 8 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_bp_test
+ *
+ * INTERNAL: CGX SMU TX Backpressure Test Registers
+ */
+union cgxx_smux_bp_test {
+	u64 u;
+	struct cgxx_smux_bp_test_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_47                   : 24;
+		u64 enable                           : 4;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct cgxx_smux_bp_test_s cn; */
+};
+
+static inline u64 CGXX_SMUX_BP_TEST(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_BP_TEST(u64 a)
+{
+	return 0x20230 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_cbfc_ctl
+ *
+ * CGX SMU PFC Control Registers Internal: INTERNAL: XOFF for a specific
+ * class/channel \<i\> is XOFF\<i\> = ([PHYS_EN]\<i\> & cmr_rx_phys_bp) |
+ * ([LOGL_EN]\<i\> & cmr_rx_logl_xoff\<i\>).
+ */
+union cgxx_smux_cbfc_ctl {
+	u64 u;
+	struct cgxx_smux_cbfc_ctl_s {
+		u64 rx_en                            : 1;
+		u64 tx_en                            : 1;
+		u64 drp_en                           : 1;
+		u64 bck_en                           : 1;
+		u64 reserved_4_31                    : 28;
+		u64 logl_en                          : 16;
+		u64 phys_en                          : 16;
+	} s;
+	/* struct cgxx_smux_cbfc_ctl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_CBFC_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_CBFC_CTL(u64 a)
+{
+	return 0x20218 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_ctrl
+ *
+ * CGX SMU Control Registers
+ */
+union cgxx_smux_ctrl {
+	u64 u;
+	struct cgxx_smux_ctrl_s {
+		u64 rx_idle                          : 1;
+		u64 tx_idle                          : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct cgxx_smux_ctrl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_CTRL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_CTRL(u64 a)
+{
+	return 0x20200 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_ext_loopback
+ *
+ * CGX SMU External Loopback Registers In loopback mode, the IFG1+IFG2 of
+ * local and remote parties must match exactly; otherwise loopback FIFO
+ * will overrun: CGX()_SMU()_TX_INT[LB_OVRFLW].
+ */
+union cgxx_smux_ext_loopback {
+	u64 u;
+	struct cgxx_smux_ext_loopback_s {
+		u64 thresh                           : 6;
+		u64 reserved_6_7                     : 2;
+		u64 depth                            : 6;
+		u64 reserved_14_15                   : 2;
+		u64 en                               : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct cgxx_smux_ext_loopback_s cn; */
+};
+
+static inline u64 CGXX_SMUX_EXT_LOOPBACK(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_EXT_LOOPBACK(u64 a)
+{
+	return 0x20208 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_hg2_control
+ *
+ * CGX SMU HiGig2 Control Registers HiGig2 TX- and RX-enable are normally
+ * set together for HiGig2 messaging. Setting just the TX or RX bit
+ * results in only the HG2 message transmit or receive capability.
+ * Setting [PHYS_EN] and [LOGL_EN] to 1 allows link PAUSE or backpressure
+ * to NIX as per the received HiGig2 message. Setting these fields to 0
+ * disables link PAUSE and backpressure to NIX in response to received
+ * messages.  CGX()_SMU()_TX_CTL[HG_EN] must be set (to enable HiGig)
+ * whenever either [HG2TX_EN] or [HG2RX_EN] are set.
+ * CGX()_SMU()_RX_UDD_SKP[LEN] must be set to 16 (to select HiGig2)
+ * whenever either [HG2TX_EN] or [HG2RX_EN] are set.
+ * CGX()_CMR_RX_OVR_BP[EN]\<0\> must be set and
+ * CGX()_CMR_RX_OVR_BP[BP]\<0\> must be cleared to 0 (to forcibly disable
+ * hardware-automatic 802.3 PAUSE packet generation) with the HiGig2
+ * Protocol when [HG2TX_EN] = 0. (The HiGig2 protocol is indicated by
+ * CGX()_SMU()_TX_CTL[HG_EN] = 1 and CGX()_SMU()_RX_UDD_SKP[LEN]=16.)
+ * Hardware can only autogenerate backpressure via HiGig2 messages
+ * (optionally, when [HG2TX_EN] = 1) with the HiGig2 protocol.
+ */
+union cgxx_smux_hg2_control {
+	u64 u;
+	struct cgxx_smux_hg2_control_s {
+		u64 logl_en                          : 16;
+		u64 phys_en                          : 1;
+		u64 hg2rx_en                         : 1;
+		u64 hg2tx_en                         : 1;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct cgxx_smux_hg2_control_s cn; */
+};
+
+static inline u64 CGXX_SMUX_HG2_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_HG2_CONTROL(u64 a)
+{
+	return 0x20210 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_mmsi_ctl_sta
+ *
+ * CGX SMU MAC Merge Service Interface (MMSI) Control/Status Registers
+ * MMSI control and status registers for frame preemption mode. Refer to
+ * IEEE 802.3br, Clause 99.
+ */
+union cgxx_smux_mmsi_ctl_sta {
+	u64 u;
+	struct cgxx_smux_mmsi_ctl_sta_s {
+		u64 p_en                             : 1;
+		u64 dis_v                            : 1;
+		u64 afs                              : 2;
+		u64 v_sta                            : 3;
+		u64 tx_pactive                       : 1;
+		u64 reserved_8_31                    : 24;
+		u64 v_time                           : 24;
+		u64 reserved_56_63                   : 8;
+	} s;
+	/* struct cgxx_smux_mmsi_ctl_sta_s cn; */
+};
+
+static inline u64 CGXX_SMUX_MMSI_CTL_STA(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_MMSI_CTL_STA(u64 a)
+{
+	return 0x20220 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_bad_col_ctrl
+ *
+ * CGX SMU RX Bad Column High Registers
+ */
+union cgxx_smux_rx_bad_col_ctrl {
+	u64 u;
+	struct cgxx_smux_rx_bad_col_ctrl_s {
+		u64 lane_rxc                         : 16;
+		u64 state                            : 3;
+		u64 val                              : 1;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct cgxx_smux_rx_bad_col_ctrl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_BAD_COL_CTRL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_BAD_COL_CTRL(u64 a)
+{
+	return 0x20060 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_bad_col_data_hi
+ *
+ * CGX SMU RX Bad Column Low Registers
+ */
+union cgxx_smux_rx_bad_col_data_hi {
+	u64 u;
+	struct cgxx_smux_rx_bad_col_data_hi_s {
+		u64 lane_rxd                         : 64;
+	} s;
+	/* struct cgxx_smux_rx_bad_col_data_hi_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_BAD_COL_DATA_HI(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_BAD_COL_DATA_HI(u64 a)
+{
+	return 0x20058 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_bad_col_data_lo
+ *
+ * CGX SMU RX Bad Column Low Registers
+ */
+union cgxx_smux_rx_bad_col_data_lo {
+	u64 u;
+	struct cgxx_smux_rx_bad_col_data_lo_s {
+		u64 lane_rxd                         : 64;
+	} s;
+	/* struct cgxx_smux_rx_bad_col_data_lo_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_BAD_COL_DATA_LO(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_BAD_COL_DATA_LO(u64 a)
+{
+	return 0x20050 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_ctl
+ *
+ * CGX SMU RX Control Registers
+ */
+union cgxx_smux_rx_ctl {
+	u64 u;
+	struct cgxx_smux_rx_ctl_s {
+		u64 status                           : 2;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct cgxx_smux_rx_ctl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_CTL(u64 a)
+{
+	return 0x20048 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_decision
+ *
+ * CGX SMU Packet Decision Registers This register specifies the byte
+ * count used to determine when to accept or to filter a packet. As each
+ * byte in a packet is received by CGX, the L2 byte count (i.e. the
+ * number of bytes from the beginning of the L2 header (DMAC)) is
+ * compared against CNT. In normal operation, the L2 header begins after
+ * the PREAMBLE + SFD (CGX()_SMU()_RX_FRM_CTL[PRE_CHK] = 1) and any
+ * optional UDD skip data (CGX()_SMU()_RX_UDD_SKP[LEN]).
+ */
+union cgxx_smux_rx_decision {
+	u64 u;
+	struct cgxx_smux_rx_decision_s {
+		u64 cnt                              : 5;
+		u64 reserved_5_63                    : 59;
+	} s;
+	/* struct cgxx_smux_rx_decision_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_DECISION(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_DECISION(u64 a)
+{
+	return 0x20038 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_frm_chk
+ *
+ * CGX SMU RX Frame Check Registers The CSRs provide the enable bits for
+ * a subset of errors passed to CMR encoded.
+ */
+union cgxx_smux_rx_frm_chk {
+	u64 u;
+	struct cgxx_smux_rx_frm_chk_s {
+		u64 reserved_0_2                     : 3;
+		u64 jabber                           : 1;
+		u64 fcserr_d                         : 1;
+		u64 fcserr_c                         : 1;
+		u64 reserved_6                       : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct cgxx_smux_rx_frm_chk_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_FRM_CHK(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_FRM_CHK(u64 a)
+{
+	return 0x20028 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_frm_ctl
+ *
+ * CGX SMU RX Frame Control Registers This register controls the handling
+ * of the frames. The [CTL_BCK] and [CTL_DRP] bits control how the
+ * hardware handles incoming PAUSE packets. The most common modes of
+ * operation: _ [CTL_BCK] = 1, [CTL_DRP] = 1: hardware handles everything
+ * _ [CTL_BCK] = 0, [CTL_DRP] = 0: software sees all PAUSE frames _
+ * [CTL_BCK] = 0, [CTL_DRP] = 1: all PAUSE frames are completely ignored
+ * These control bits should be set to [CTL_BCK] = 0, [CTL_DRP] = 0 in
+ * half-duplex mode. Since PAUSE packets only apply to full duplex
+ * operation, any PAUSE packet would constitute an exception which should
+ * be handled by the processing cores. PAUSE packets should not be
+ * forwarded.
+ */
+union cgxx_smux_rx_frm_ctl {
+	u64 u;
+	struct cgxx_smux_rx_frm_ctl_s {
+		u64 pre_chk                          : 1;
+		u64 pre_strp                         : 1;
+		u64 ctl_drp                          : 1;
+		u64 ctl_bck                          : 1;
+		u64 ctl_mcst                         : 1;
+		u64 ctl_smac                         : 1;
+		u64 reserved_6_11                    : 6;
+		u64 ptp_mode                         : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct cgxx_smux_rx_frm_ctl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_FRM_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_FRM_CTL(u64 a)
+{
+	return 0x20020 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_int
+ *
+ * CGX SMU Receive Interrupt Registers SMU Interrupt Register. Internal:
+ * Exception conditions \<9\> and \<4:0\> can also set the rcv/opcode in
+ * the received packet's work queue entry. CGX()_SMU()_RX_FRM_CHK
+ * provides a bit mask for configuring which conditions set the error.
+ */
+union cgxx_smux_rx_int {
+	u64 u;
+	struct cgxx_smux_rx_int_s {
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 loc_fault                        : 1;
+		u64 rem_fault                        : 1;
+		u64 bad_seq                          : 1;
+		u64 bad_term                         : 1;
+		u64 hg2fld                           : 1;
+		u64 hg2cc                            : 1;
+		u64 badver                           : 1;
+		u64 badrsp                           : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct cgxx_smux_rx_int_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_INT(u64 a)
+{
+	return 0x20000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_int_ena_w1c
+ *
+ * CGX SMU Receive Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_smux_rx_int_ena_w1c {
+	u64 u;
+	struct cgxx_smux_rx_int_ena_w1c_s {
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 loc_fault                        : 1;
+		u64 rem_fault                        : 1;
+		u64 bad_seq                          : 1;
+		u64 bad_term                         : 1;
+		u64 hg2fld                           : 1;
+		u64 hg2cc                            : 1;
+		u64 badver                           : 1;
+		u64 badrsp                           : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct cgxx_smux_rx_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_INT_ENA_W1C(u64 a)
+{
+	return 0x20010 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_int_ena_w1s
+ *
+ * CGX SMU Receive Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_smux_rx_int_ena_w1s {
+	u64 u;
+	struct cgxx_smux_rx_int_ena_w1s_s {
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 loc_fault                        : 1;
+		u64 rem_fault                        : 1;
+		u64 bad_seq                          : 1;
+		u64 bad_term                         : 1;
+		u64 hg2fld                           : 1;
+		u64 hg2cc                            : 1;
+		u64 badver                           : 1;
+		u64 badrsp                           : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct cgxx_smux_rx_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_INT_ENA_W1S(u64 a)
+{
+	return 0x20018 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_int_w1s
+ *
+ * CGX SMU Receive Interrupt Set Registers This register sets interrupt
+ * bits.
+ */
+union cgxx_smux_rx_int_w1s {
+	u64 u;
+	struct cgxx_smux_rx_int_w1s_s {
+		u64 jabber                           : 1;
+		u64 fcserr                           : 1;
+		u64 rcverr                           : 1;
+		u64 skperr                           : 1;
+		u64 pcterr                           : 1;
+		u64 rsverr                           : 1;
+		u64 loc_fault                        : 1;
+		u64 rem_fault                        : 1;
+		u64 bad_seq                          : 1;
+		u64 bad_term                         : 1;
+		u64 hg2fld                           : 1;
+		u64 hg2cc                            : 1;
+		u64 badver                           : 1;
+		u64 badrsp                           : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct cgxx_smux_rx_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_INT_W1S(u64 a)
+{
+	return 0x20008 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_jabber
+ *
+ * CGX SMU Maximum Packet-Size Registers This register specifies the
+ * maximum size for packets, beyond which the SMU truncates. Internal:
+ * JABBER[CNT] is checked against the packet that arrives from SPU.  The
+ * checking is performed before preamble is stripped or PTP is inserted.
+ * If present, preamble is counted as eight bytes of the incoming packet.
+ */
+union cgxx_smux_rx_jabber {
+	u64 u;
+	struct cgxx_smux_rx_jabber_s {
+		u64 cnt                              : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_smux_rx_jabber_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_JABBER(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_JABBER(u64 a)
+{
+	return 0x20030 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_udd_skp
+ *
+ * CGX SMU User-Defined Data Skip Registers Internal: (1) The skip bytes
+ * are part of the packet and will be sent down the NCB packet interface
+ * and will be handled by NIX.  (2) The system can determine if the UDD
+ * bytes are included in the FCS check by using the FCSSEL field if the
+ * FCS check is enabled.  (3) Assume that the preamble/sfd is always at
+ * the start of the frame even before UDD bytes.  In most cases, there
+ * will be no preamble in these cases since it will be packet interface
+ * in direct communication to another packet interface (MAC to MAC)
+ * without a PHY involved.  (4) We can still do address filtering and
+ * control packet filtering if the user desires.  (5) In all cases, the
+ * UDD bytes will be sent down the packet interface as part of the
+ * packet.  The UDD bytes are never stripped from the actual packet.
+ */
+union cgxx_smux_rx_udd_skp {
+	u64 u;
+	struct cgxx_smux_rx_udd_skp_s {
+		u64 len                              : 7;
+		u64 reserved_7                       : 1;
+		u64 fcssel                           : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct cgxx_smux_rx_udd_skp_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_UDD_SKP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_UDD_SKP(u64 a)
+{
+	return 0x20040 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_ctrl0
+ *
+ * CGX SMU RX Wake-on-LAN Control 0 Registers
+ */
+union cgxx_smux_rx_wol_ctrl0 {
+	u64 u;
+	struct cgxx_smux_rx_wol_ctrl0_s {
+		u64 dmac                             : 48;
+		u64 pswd_len                         : 4;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct cgxx_smux_rx_wol_ctrl0_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_CTRL0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_CTRL0(u64 a)
+{
+	return 0x20068 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_ctrl1
+ *
+ * CGX SMU RX Wake-on-LAN Control 1 Registers
+ */
+union cgxx_smux_rx_wol_ctrl1 {
+	u64 u;
+	struct cgxx_smux_rx_wol_ctrl1_s {
+		u64 pswd                             : 64;
+	} s;
+	/* struct cgxx_smux_rx_wol_ctrl1_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_CTRL1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_CTRL1(u64 a)
+{
+	return 0x20070 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_int
+ *
+ * CGX SMU RX WOL Interrupt Registers These registers allow WOL
+ * interrupts to be sent to the control processor.
+ */
+union cgxx_smux_rx_wol_int {
+	u64 u;
+	struct cgxx_smux_rx_wol_int_s {
+		u64 wol_rcvd                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_smux_rx_wol_int_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_INT(u64 a)
+{
+	return 0x20078 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_int_ena_w1c
+ *
+ * CGX SMU RX WOL Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_smux_rx_wol_int_ena_w1c {
+	u64 u;
+	struct cgxx_smux_rx_wol_int_ena_w1c_s {
+		u64 wol_rcvd                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_smux_rx_wol_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_INT_ENA_W1C(u64 a)
+{
+	return 0x20088 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_int_ena_w1s
+ *
+ * CGX SMU RX WOL Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union cgxx_smux_rx_wol_int_ena_w1s {
+	u64 u;
+	struct cgxx_smux_rx_wol_int_ena_w1s_s {
+		u64 wol_rcvd                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_smux_rx_wol_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_INT_ENA_W1S(u64 a)
+{
+	return 0x20090 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_rx_wol_int_w1s
+ *
+ * CGX SMU RX WOL Interrupt Set Registers This register sets interrupt
+ * bits.
+ */
+union cgxx_smux_rx_wol_int_w1s {
+	u64 u;
+	struct cgxx_smux_rx_wol_int_w1s_s {
+		u64 wol_rcvd                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_smux_rx_wol_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_RX_WOL_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_RX_WOL_INT_W1S(u64 a)
+{
+	return 0x20080 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_smac
+ *
+ * CGX SMU SMAC Registers
+ */
+union cgxx_smux_smac {
+	u64 u;
+	struct cgxx_smux_smac_s {
+		u64 smac                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_smux_smac_s cn; */
+};
+
+static inline u64 CGXX_SMUX_SMAC(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_SMAC(u64 a)
+{
+	return 0x20108 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_append
+ *
+ * CGX SMU TX Append Control Registers For more details on the
+ * interactions between FCS and PAD, see also the description of
+ * CGX()_SMU()_TX_MIN_PKT[MIN_SIZE].
+ */
+union cgxx_smux_tx_append {
+	u64 u;
+	struct cgxx_smux_tx_append_s {
+		u64 preamble                         : 1;
+		u64 pad                              : 1;
+		u64 fcs_d                            : 1;
+		u64 fcs_c                            : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct cgxx_smux_tx_append_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_APPEND(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_APPEND(u64 a)
+{
+	return 0x20100 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_ctl
+ *
+ * CGX SMU Transmit Control Registers
+ */
+union cgxx_smux_tx_ctl {
+	u64 u;
+	struct cgxx_smux_tx_ctl_s {
+		u64 dic_en                           : 1;
+		u64 uni_en                           : 1;
+		u64 x4a_dis                          : 1;
+		u64 mia_en                           : 1;
+		u64 ls                               : 2;
+		u64 ls_byp                           : 1;
+		u64 l2p_bp_conv                      : 1;
+		u64 hg_en                            : 1;
+		u64 hg_pause_hgi                     : 2;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct cgxx_smux_tx_ctl_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_CTL(u64 a)
+{
+	return 0x20178 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_dack
+ *
+ * CGX SMU TX Drop Counters Registers
+ */
+union cgxx_smux_tx_dack {
+	u64 u;
+	struct cgxx_smux_tx_dack_s {
+		u64 dpi_sdrop_ack                    : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_smux_tx_dack_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_DACK(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_DACK(u64 a)
+{
+	return 0x201b0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_dcnt
+ *
+ * CGX SMU TX Drop Counters Registers
+ */
+union cgxx_smux_tx_dcnt {
+	u64 u;
+	struct cgxx_smux_tx_dcnt_s {
+		u64 dpi_sdrop_cnt                    : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_smux_tx_dcnt_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_DCNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_DCNT(u64 a)
+{
+	return 0x201a8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_eee
+ *
+ * INTERNAL: CGX SMU TX EEE Configure Registers  Resvered. Internal:
+ * These registers control when SMU TX requests to enter or exist LPI.
+ * Those registers take effect only when EEE is supported and enabled for
+ * a given LMAC.
+ */
+union cgxx_smux_tx_eee {
+	u64 u;
+	struct cgxx_smux_tx_eee_s {
+		u64 idle_thresh                      : 28;
+		u64 reserved_28                      : 1;
+		u64 force_lpi                        : 1;
+		u64 wakeup                           : 1;
+		u64 auto_lpi                         : 1;
+		u64 idle_cnt                         : 28;
+		u64 reserved_60_61                   : 2;
+		u64 tx_lpi_wake                      : 1;
+		u64 tx_lpi                           : 1;
+	} s;
+	/* struct cgxx_smux_tx_eee_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_EEE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_EEE(u64 a)
+{
+	return 0x20190 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_eee_timer_status
+ *
+ * INTERNAL: CGX SMU TX EEE TIMER STATUS Registers  Reserved. Internal:
+ * These registers configure SMU TX EEE timing parameters.
+ */
+union cgxx_smux_tx_eee_timer_status {
+	u64 u;
+	struct cgxx_smux_tx_eee_timer_status_s {
+		u64 lpi_wake_cnt                     : 16;
+		u64 reserved_16_30                   : 15;
+		u64 wake_timer_done                  : 1;
+		u64 link_ok_cnt                      : 30;
+		u64 reserved_62                      : 1;
+		u64 link_timer_done                  : 1;
+	} s;
+	/* struct cgxx_smux_tx_eee_timer_status_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_EEE_TIMER_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_EEE_TIMER_STATUS(u64 a)
+{
+	return 0x201a0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_eee_timing
+ *
+ * INTERNAL: CGX SMU TX EEE TIMING Parameter Registers  Reserved.
+ * Internal: These registers configure SMU TX EEE timing parameters.
+ */
+union cgxx_smux_tx_eee_timing {
+	u64 u;
+	struct cgxx_smux_tx_eee_timing_s {
+		u64 w_sys_tx_min                     : 16;
+		u64 reserved_16_31                   : 16;
+		u64 link_ok_min                      : 30;
+		u64 reserved_62_63                   : 2;
+	} s;
+	/* struct cgxx_smux_tx_eee_timing_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_EEE_TIMING(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_EEE_TIMING(u64 a)
+{
+	return 0x20198 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_ifg
+ *
+ * CGX SMU TX Interframe-Gap Cycles Registers Programming IFG1 and IFG2:
+ * * For XAUI/RXAUI/10G/25G/40G/50G/100G systems that require IEEE 802.3
+ * compatibility, the [IFG1]+[IFG2] sum must be 12. * In loopback mode,
+ * the [IFG1]+[IFG2] of local and remote parties must match exactly;
+ * otherwise loopback FIFO will overrun: CGX()_SMU()_TX_INT[LB_OVRFLW]. *
+ * When CGX()_SMU()_TX_CTL[DIC_EN] is set, [IFG1]+[IFG2] sum must be at
+ * least 8. The behavior of smaller values is un-determined. * When
+ * CGX()_SMU()_TX_CTL[DIC_EN] is cleared, the minimum value of
+ * [IFG1]+[IFG2] is 1 for 40G/50G/100G LMAC_TYPE configurations and 5 for
+ * all other values. The behavior of smaller values is un-determined.
+ * Internal: When CGX()_SMU()_TX_CTL[DIC_EN] is set, SMU TX treats
+ * ([IFG1]+[IFG2]) \< 8 as 8 for 40G/50G/100G MACs and ([IFG1]+[IFG2]) \<
+ * 8 as 8 for other MACs. When CGX()_SMU()_TX_CTL[DIC_EN] is cleared, SMU
+ * TX can work correctly with any IFG1 and IFG2.
+ */
+union cgxx_smux_tx_ifg {
+	u64 u;
+	struct cgxx_smux_tx_ifg_s {
+		u64 ifg1                             : 4;
+		u64 ifg2                             : 4;
+		u64 mia_amt                          : 2;
+		u64 reserved_10_15                   : 6;
+		u64 mia_cnt                          : 8;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct cgxx_smux_tx_ifg_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_IFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_IFG(u64 a)
+{
+	return 0x20160 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_int
+ *
+ * CGX SMU TX Interrupt Registers
+ */
+union cgxx_smux_tx_int {
+	u64 u;
+	struct cgxx_smux_tx_int_s {
+		u64 undflw                           : 1;
+		u64 xchange                          : 1;
+		u64 fake_commit                      : 1;
+		u64 lb_undflw                        : 1;
+		u64 lb_ovrflw                        : 1;
+		u64 dpi_sdrop                        : 1;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct cgxx_smux_tx_int_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_INT(u64 a)
+{
+	return 0x20140 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_int_ena_w1c
+ *
+ * CGX SMU TX Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_smux_tx_int_ena_w1c {
+	u64 u;
+	struct cgxx_smux_tx_int_ena_w1c_s {
+		u64 undflw                           : 1;
+		u64 xchange                          : 1;
+		u64 fake_commit                      : 1;
+		u64 lb_undflw                        : 1;
+		u64 lb_ovrflw                        : 1;
+		u64 dpi_sdrop                        : 1;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct cgxx_smux_tx_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_INT_ENA_W1C(u64 a)
+{
+	return 0x20150 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_int_ena_w1s
+ *
+ * CGX SMU TX Interrupt Enable Set Registers This register sets interrupt
+ * enable bits.
+ */
+union cgxx_smux_tx_int_ena_w1s {
+	u64 u;
+	struct cgxx_smux_tx_int_ena_w1s_s {
+		u64 undflw                           : 1;
+		u64 xchange                          : 1;
+		u64 fake_commit                      : 1;
+		u64 lb_undflw                        : 1;
+		u64 lb_ovrflw                        : 1;
+		u64 dpi_sdrop                        : 1;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct cgxx_smux_tx_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_INT_ENA_W1S(u64 a)
+{
+	return 0x20158 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_int_w1s
+ *
+ * CGX SMU TX Interrupt Set Registers This register sets interrupt bits.
+ */
+union cgxx_smux_tx_int_w1s {
+	u64 u;
+	struct cgxx_smux_tx_int_w1s_s {
+		u64 undflw                           : 1;
+		u64 xchange                          : 1;
+		u64 fake_commit                      : 1;
+		u64 lb_undflw                        : 1;
+		u64 lb_ovrflw                        : 1;
+		u64 dpi_sdrop                        : 1;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct cgxx_smux_tx_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_INT_W1S(u64 a)
+{
+	return 0x20148 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_min_pkt
+ *
+ * CGX SMU TX Minimum-Size-Packet Registers Internal: [MIN_SIZE] less
+ * than 16 will be ignored by hardware which will use 16 instead.
+ */
+union cgxx_smux_tx_min_pkt {
+	u64 u;
+	struct cgxx_smux_tx_min_pkt_s {
+		u64 min_size                         : 8;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct cgxx_smux_tx_min_pkt_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_MIN_PKT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_MIN_PKT(u64 a)
+{
+	return 0x20118 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_pkt_dmac
+ *
+ * CGX SMU TX PAUSE-Packet DMAC-Field Registers This register provides
+ * the DMAC value that is placed in outbound PAUSE packets.
+ */
+union cgxx_smux_tx_pause_pkt_dmac {
+	u64 u;
+	struct cgxx_smux_tx_pause_pkt_dmac_s {
+		u64 dmac                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_smux_tx_pause_pkt_dmac_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_DMAC(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_DMAC(u64 a)
+{
+	return 0x20168 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_pkt_interval
+ *
+ * CGX SMU TX PAUSE-Packet Transmission-Interval Registers This register
+ * specifies how often PAUSE packets are sent.
+ */
+union cgxx_smux_tx_pause_pkt_interval {
+	u64 u;
+	struct cgxx_smux_tx_pause_pkt_interval_s {
+		u64 interval                         : 16;
+		u64 hg2_intra_interval               : 16;
+		u64 hg2_intra_en                     : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct cgxx_smux_tx_pause_pkt_interval_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_INTERVAL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_INTERVAL(u64 a)
+{
+	return 0x20120 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_pkt_time
+ *
+ * CGX SMU TX PAUSE Packet Time Registers
+ */
+union cgxx_smux_tx_pause_pkt_time {
+	u64 u;
+	struct cgxx_smux_tx_pause_pkt_time_s {
+		u64 p_time                           : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_smux_tx_pause_pkt_time_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_TIME(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_TIME(u64 a)
+{
+	return 0x20110 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_pkt_type
+ *
+ * CGX SMU TX PAUSE-Packet P_TYPE-Field Registers This register provides
+ * the P_TYPE field that is placed in outbound PAUSE packets.
+ */
+union cgxx_smux_tx_pause_pkt_type {
+	u64 u;
+	struct cgxx_smux_tx_pause_pkt_type_s {
+		u64 p_type                           : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_smux_tx_pause_pkt_type_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_TYPE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_PKT_TYPE(u64 a)
+{
+	return 0x20170 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_togo
+ *
+ * CGX SMU TX Time-to-Backpressure Registers
+ */
+union cgxx_smux_tx_pause_togo {
+	u64 u;
+	struct cgxx_smux_tx_pause_togo_s {
+		u64 p_time                           : 16;
+		u64 msg_time                         : 16;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_smux_tx_pause_togo_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_TOGO(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_TOGO(u64 a)
+{
+	return 0x20130 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_pause_zero
+ *
+ * CGX SMU TX PAUSE Zero Registers
+ */
+union cgxx_smux_tx_pause_zero {
+	u64 u;
+	struct cgxx_smux_tx_pause_zero_s {
+		u64 send                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_smux_tx_pause_zero_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_PAUSE_ZERO(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_PAUSE_ZERO(u64 a)
+{
+	return 0x20138 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_soft_pause
+ *
+ * CGX SMU TX Soft PAUSE Registers
+ */
+union cgxx_smux_tx_soft_pause {
+	u64 u;
+	struct cgxx_smux_tx_soft_pause_s {
+		u64 p_time                           : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_smux_tx_soft_pause_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_SOFT_PAUSE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_SOFT_PAUSE(u64 a)
+{
+	return 0x20128 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_smu#_tx_thresh
+ *
+ * CGX SMU TX Threshold Registers
+ */
+union cgxx_smux_tx_thresh {
+	u64 u;
+	struct cgxx_smux_tx_thresh_s {
+		u64 cnt                              : 12;
+		u64 reserved_12_15                   : 4;
+		u64 dpi_thresh                       : 5;
+		u64 reserved_21_23                   : 3;
+		u64 dpi_depth                        : 5;
+		u64 reserved_29_31                   : 3;
+		u64 ecnt                             : 12;
+		u64 reserved_44_63                   : 20;
+	} s;
+	/* struct cgxx_smux_tx_thresh_s cn; */
+};
+
+static inline u64 CGXX_SMUX_TX_THRESH(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SMUX_TX_THRESH(u64 a)
+{
+	return 0x20180 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_adv
+ *
+ * CGX SPU Autonegotiation Advertisement Registers Software programs this
+ * register with the contents of the AN-link code word base page to be
+ * transmitted during autonegotiation. (See IEEE 802.3 section 73.6 for
+ * details.) Any write operations to this register prior to completion of
+ * autonegotiation, as indicated by CGX()_SPU()_AN_STATUS[AN_COMPLETE],
+ * should be followed by a renegotiation in order for the new values to
+ * take effect. Renegotiation is initiated by setting
+ * CGX()_SPU()_AN_CONTROL[AN_RESTART]. Once autonegotiation has
+ * completed, software can examine this register along with
+ * CGX()_SPU()_AN_LP_BASE to determine the highest common denominator
+ * technology.
+ */
+union cgxx_spux_an_adv {
+	u64 u;
+	struct cgxx_spux_an_adv_s {
+		u64 s                                : 5;
+		u64 e                                : 5;
+		u64 pause                            : 1;
+		u64 asm_dir                          : 1;
+		u64 xnp_able                         : 1;
+		u64 rf                               : 1;
+		u64 ack                              : 1;
+		u64 np                               : 1;
+		u64 t                                : 5;
+		u64 a1g_kx                           : 1;
+		u64 a10g_kx4                         : 1;
+		u64 a10g_kr                          : 1;
+		u64 a40g_kr4                         : 1;
+		u64 a40g_cr4                         : 1;
+		u64 a100g_cr10                       : 1;
+		u64 a100g_kp4                        : 1;
+		u64 a100g_kr4                        : 1;
+		u64 a100g_cr4                        : 1;
+		u64 a25g_krs_crs                     : 1;
+		u64 a25g_kr_cr                       : 1;
+		u64 arsv                             : 12;
+		u64 a25g_rs_fec_req                  : 1;
+		u64 a25g_br_fec_req                  : 1;
+		u64 fec_able                         : 1;
+		u64 fec_req                          : 1;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_spux_an_adv_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_ADV(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_ADV(u64 a)
+{
+	return 0x10198 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_bp_status
+ *
+ * CGX SPU Autonegotiation Backplane Ethernet & BASE-R Copper Status
+ * Registers The contents of this register are updated during
+ * autonegotiation and are valid when CGX()_SPU()_AN_STATUS[AN_COMPLETE]
+ * is set. At that time, one of the port type bits will be set depending
+ * on the AN priority resolution. The port types are listed in order of
+ * decreasing priority. If a BASE-R type is negotiated then [FEC] or
+ * [RS_FEC] will be set to indicate whether/which FEC operation has been
+ * negotiated and will be clear otherwise.
+ */
+union cgxx_spux_an_bp_status {
+	u64 u;
+	struct cgxx_spux_an_bp_status_s {
+		u64 bp_an_able                       : 1;
+		u64 n1g_kx                           : 1;
+		u64 n10g_kx4                         : 1;
+		u64 n10g_kr                          : 1;
+		u64 n25g_kr1                         : 1;
+		u64 n25g_cr1                         : 1;
+		u64 n25g_krs_crs                     : 1;
+		u64 n25g_kr_cr                       : 1;
+		u64 n40g_kr4                         : 1;
+		u64 n40g_cr4                         : 1;
+		u64 n50g_kr2                         : 1;
+		u64 n50g_cr2                         : 1;
+		u64 n100g_cr10                       : 1;
+		u64 n100g_kp4                        : 1;
+		u64 n100g_kr4                        : 1;
+		u64 n100g_cr4                        : 1;
+		u64 fec                              : 1;
+		u64 rs_fec                           : 1;
+		u64 reserved_18_63                   : 46;
+	} s;
+	/* struct cgxx_spux_an_bp_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_BP_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_BP_STATUS(u64 a)
+{
+	return 0x101b8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_control
+ *
+ * CGX SPU Autonegotiation Control Registers
+ */
+union cgxx_spux_an_control {
+	u64 u;
+	struct cgxx_spux_an_control_s {
+		u64 reserved_0_8                     : 9;
+		u64 an_restart                       : 1;
+		u64 reserved_10_11                   : 2;
+		u64 an_en                            : 1;
+		u64 xnp_en                           : 1;
+		u64 reserved_14                      : 1;
+		u64 an_reset                         : 1;
+		u64 an_arb_link_chk_en               : 1;
+		u64 usx_an_arb_link_chk_en           : 1;
+		u64 reserved_18_63                   : 46;
+	} s;
+	/* struct cgxx_spux_an_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_CONTROL(u64 a)
+{
+	return 0x10188 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_lp_base
+ *
+ * CGX SPU Autonegotiation Link-Partner Base-Page Ability Registers This
+ * register captures the contents of the latest AN link code word base
+ * page received from the link partner during autonegotiation. (See IEEE
+ * 802.3 section 73.6 for details.) CGX()_SPU()_AN_STATUS[PAGE_RX] is set
+ * when this register is updated by hardware.
+ */
+union cgxx_spux_an_lp_base {
+	u64 u;
+	struct cgxx_spux_an_lp_base_s {
+		u64 s                                : 5;
+		u64 e                                : 5;
+		u64 pause                            : 1;
+		u64 asm_dir                          : 1;
+		u64 xnp_able                         : 1;
+		u64 rf                               : 1;
+		u64 ack                              : 1;
+		u64 np                               : 1;
+		u64 t                                : 5;
+		u64 a1g_kx                           : 1;
+		u64 a10g_kx4                         : 1;
+		u64 a10g_kr                          : 1;
+		u64 a40g_kr4                         : 1;
+		u64 a40g_cr4                         : 1;
+		u64 a100g_cr10                       : 1;
+		u64 a100g_kp4                        : 1;
+		u64 a100g_kr4                        : 1;
+		u64 a100g_cr4                        : 1;
+		u64 a25g_krs_crs                     : 1;
+		u64 a25g_kr_cr                       : 1;
+		u64 arsv                             : 12;
+		u64 a25g_rs_fec_req                  : 1;
+		u64 a25g_br_fec_req                  : 1;
+		u64 fec_able                         : 1;
+		u64 fec_req                          : 1;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_spux_an_lp_base_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_LP_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_LP_BASE(u64 a)
+{
+	return 0x101a0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_lp_xnp
+ *
+ * CGX SPU Autonegotiation Link Partner Extended Next Page Ability
+ * Registers This register captures the contents of the latest next page
+ * code word received from the link partner during autonegotiation, if
+ * any. See IEEE 802.3 section 73.7.7 for details.
+ */
+union cgxx_spux_an_lp_xnp {
+	u64 u;
+	struct cgxx_spux_an_lp_xnp_s {
+		u64 m_u                              : 11;
+		u64 toggle                           : 1;
+		u64 ack2                             : 1;
+		u64 mp                               : 1;
+		u64 ack                              : 1;
+		u64 np                               : 1;
+		u64 u                                : 32;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_spux_an_lp_xnp_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_LP_XNP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_LP_XNP(u64 a)
+{
+	return 0x101b0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_status
+ *
+ * CGX SPU Autonegotiation Status Registers
+ */
+union cgxx_spux_an_status {
+	u64 u;
+	struct cgxx_spux_an_status_s {
+		u64 lp_an_able                       : 1;
+		u64 reserved_1                       : 1;
+		u64 link_status                      : 1;
+		u64 an_able                          : 1;
+		u64 rmt_flt                          : 1;
+		u64 an_complete                      : 1;
+		u64 page_rx                          : 1;
+		u64 xnp_stat                         : 1;
+		u64 reserved_8                       : 1;
+		u64 prl_flt                          : 1;
+		u64 reserved_10_63                   : 54;
+	} s;
+	/* struct cgxx_spux_an_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_STATUS(u64 a)
+{
+	return 0x10190 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_an_xnp_tx
+ *
+ * CGX SPU Autonegotiation Extended Next Page Transmit Registers Software
+ * programs this register with the contents of the AN message next page
+ * or unformatted next page link code word to be transmitted during
+ * autonegotiation. Next page exchange occurs after the base link code
+ * words have been exchanged if either end of the link segment sets the
+ * NP bit to 1, indicating that it has at least one next page to send.
+ * Once initiated, next page exchange continues until both ends of the
+ * link segment set their NP bits to 0. See IEEE 802.3 section 73.7.7 for
+ * details.
+ */
+union cgxx_spux_an_xnp_tx {
+	u64 u;
+	struct cgxx_spux_an_xnp_tx_s {
+		u64 m_u                              : 11;
+		u64 toggle                           : 1;
+		u64 ack2                             : 1;
+		u64 mp                               : 1;
+		u64 ack                              : 1;
+		u64 np                               : 1;
+		u64 u                                : 32;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct cgxx_spux_an_xnp_tx_s cn; */
+};
+
+static inline u64 CGXX_SPUX_AN_XNP_TX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_AN_XNP_TX(u64 a)
+{
+	return 0x101a8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_algn_status
+ *
+ * CGX SPU Multilane BASE-R PCS Alignment-Status Registers This register
+ * implements the IEEE 802.3 multilane BASE-R PCS alignment status 1-4
+ * registers (3.50-3.53). It is valid only when the LPCS type is
+ * 40GBASE-R, 50GBASE-R, 100GBASE-R, (CGX()_CMR()_CONFIG[LMAC_TYPE] =
+ * CGX_LMAC_TYPES_E::FORTYG_R,FIFTYG_R,HUNDREDG_R), and always returns
+ * 0x0 for all other LPCS types. Service interfaces (lanes) 19-0 (100G)
+ * and 3-0 (all others) are mapped to PCS lanes 19-0 or 3-0 via
+ * CGX()_SPU()_BR_LANE_MAP()[LN_MAPPING]. For 100G, logical lane 0 fans
+ * out to service interfaces 0-4, logical lane 1 fans out to service
+ * interfaces 5-9, ... etc. For all other modes, logical lanes and
+ * service interfaces are identical. Logical interfaces (lanes) map to
+ * SerDes lanes via CGX()_CMR()_CONFIG[LANE_TO_SDS] (programmable).
+ */
+union cgxx_spux_br_algn_status {
+	u64 u;
+	struct cgxx_spux_br_algn_status_s {
+		u64 block_lock                       : 20;
+		u64 reserved_20_29                   : 10;
+		u64 alignd                           : 1;
+		u64 reserved_31_40                   : 10;
+		u64 marker_lock                      : 20;
+		u64 reserved_61_63                   : 3;
+	} s;
+	/* struct cgxx_spux_br_algn_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_ALGN_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_ALGN_STATUS(u64 a)
+{
+	return 0x10050 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_lane_map#
+ *
+ * CGX SPU 40,50,100GBASE-R Lane-Mapping Registers This register
+ * implements the IEEE 802.3 lane 0-19 mapping registers (3.400-3.403).
+ * It is valid only when the LPCS type is 40GBASE-R, 50GBASE-R,
+ * 100GBASE-R, USXGMII (CGX()_CMR()_CONFIG[LMAC_TYPE]), and always
+ * returns 0x0 for all other LPCS types. The LNx_MAPPING field for each
+ * programmed PCS lane (called service interface in 802.3) is valid when
+ * that lane has achieved alignment marker lock on the receive side (i.e.
+ * the associated CGX()_SPU()_BR_ALGN_STATUS[MARKER_LOCK] = 1), and is
+ * invalid otherwise. When valid, it returns the actual detected receive
+ * PCS lane number based on the received alignment marker contents
+ * received on that service interface.  In RS-FEC mode the LNx_MAPPING
+ * field is valid when that lane has achieved alignment marker lock on
+ * the receive side (i.e. the associated
+ * CGX()_SPU()_RSFEC_STATUS[AMPS_LOCK] = 1), and is invalid otherwise.
+ * When valid, it returns the actual detected receive FEC lane number
+ * based on the received alignment marker contents received on that
+ * logical lane therefore expect for RS-FEC that LNx_MAPPING = x.  The
+ * mapping is flexible because IEEE 802.3 allows multilane BASE-R receive
+ * lanes to be re-ordered. Note that for the transmit side, each logical
+ * lane is mapped to a physical SerDes lane based on the programming of
+ * CGX()_CMR()_CONFIG[LANE_TO_SDS]. For the receive side,
+ * CGX()_CMR()_CONFIG[LANE_TO_SDS] specifies the logical lane to physical
+ * SerDes lane mapping, and this register specifies the service interface
+ * (or lane) to PCS lane mapping.
+ */
+union cgxx_spux_br_lane_mapx {
+	u64 u;
+	struct cgxx_spux_br_lane_mapx_s {
+		u64 ln_mapping                       : 6;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct cgxx_spux_br_lane_mapx_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_LANE_MAPX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_LANE_MAPX(u64 a, u64 b)
+{
+	return 0x10600 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_control
+ *
+ * CGX SPU BASE-R PMD Control Registers
+ */
+union cgxx_spux_br_pmd_control {
+	u64 u;
+	struct cgxx_spux_br_pmd_control_s {
+		u64 train_restart                    : 1;
+		u64 train_en                         : 1;
+		u64 use_lane_poly                    : 1;
+		u64 max_wait_disable                 : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	struct cgxx_spux_br_pmd_control_cn96xx {
+		u64 train_restart                    : 1;
+		u64 train_en                         : 1;
+		u64 use_lane_poly                    : 1;
+		u64 reserved_3_63                    : 61;
+	} cn96xx;
+	/* struct cgxx_spux_br_pmd_control_s cnf95xxp1; */
+	/* struct cgxx_spux_br_pmd_control_cn96xx cnf95xxp2; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_CONTROL(u64 a)
+{
+	return 0x100a8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_ld_cup
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Local Device Coefficient Update Registers
+ * This register implements MDIO register 1.154 of 802.3-2012 Section 5
+ * CL45 for 10GBASE-R and and of 802.3by-2016 CL45 for 25GBASE-R. Note
+ * that for 10G, 25G LN0_ only is used.  It implements  MDIO registers
+ * 1.1300-1.1303 for all other BASE-R modes (40G, 50G, 100G) per
+ * 802.3bj-2014 CL45. Note that for 50G LN0_ and LN1_ only are used.  The
+ * fields in this register are read/write even though they are specified
+ * as read-only in 802.3.  The register is automatically cleared at the
+ * start of training. When link training is in progress, each field
+ * reflects the contents of the coefficient update field in the
+ * associated lane's outgoing training frame.  If
+ * CGX()_SPU_DBG_CONTROL[BR_PMD_TRAIN_SOFT_EN] is set, then this register
+ * must be updated by software during link training and hardware updates
+ * are disabled. If CGX()_SPU_DBG_CONTROL[BR_PMD_TRAIN_SOFT_EN] is clear,
+ * this register is automatically updated by hardware, and it should not
+ * be written by software. The lane fields in this register are indexed
+ * by logical PCS lane ID.
+ */
+union cgxx_spux_br_pmd_ld_cup {
+	u64 u;
+	struct cgxx_spux_br_pmd_ld_cup_s {
+		u64 ln0_cup                          : 16;
+		u64 ln1_cup                          : 16;
+		u64 ln2_cup                          : 16;
+		u64 ln3_cup                          : 16;
+	} s;
+	/* struct cgxx_spux_br_pmd_ld_cup_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_LD_CUP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_LD_CUP(u64 a)
+{
+	return 0x100c8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_ld_rep
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Local Device Status Report Registers  This
+ * register implements MDIO register 1.155 of 802.3-2012 Section 5 CL45
+ * for 10GBASE-R and and of 802.3by-2016 CL45 for 25GBASE-R. Note that
+ * for 10G, 25G LN0_ only is used.  It implements  MDIO registers
+ * 1.1400-1.1403 for all other BASE-R modes (40G, 50G, 100G) per
+ * 802.3bj-2014 CL45. Note that for 50G LN0_ and LN1_ only are used.  The
+ * fields in this register are read/write even though they are specified
+ * as read-only in 802.3.  The register is automatically cleared at the
+ * start of training. Each field reflects the contents of the status
+ * report field in the associated lane's outgoing training frame.  If
+ * CGX()_SPU_DBG_CONTROL[BR_PMD_TRAIN_SOFT_EN] is set, then this register
+ * must be updated by software during link training and hardware updates
+ * are disabled. If CGX()_SPU_DBG_CONTROL[BR_PMD_TRAIN_SOFT_EN] is clear,
+ * this register is automatically updated by hardware, and it should not
+ * be written by software. The lane fields in this register are indexed
+ * by logical PCS lane ID.
+ */
+union cgxx_spux_br_pmd_ld_rep {
+	u64 u;
+	struct cgxx_spux_br_pmd_ld_rep_s {
+		u64 ln0_rep                          : 16;
+		u64 ln1_rep                          : 16;
+		u64 ln2_rep                          : 16;
+		u64 ln3_rep                          : 16;
+	} s;
+	/* struct cgxx_spux_br_pmd_ld_rep_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_LD_REP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_LD_REP(u64 a)
+{
+	return 0x100d0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_lp_cup
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Link Partner Coefficient Update Registers
+ * This register implements MDIO register 1.152 of 802.3-2012 Section 5
+ * CL45 for 10GBASE-R and and of 802.3by-2016 CL45 for 25GBASE-R. Note
+ * that for 10G, 25G LN0_ only is used.  It implements  MDIO registers
+ * 1.1100-1.1103 for all other BASE-R modes (40G, 50G, 100G) per
+ * 802.3bj-2014 CL45. Note that for 50G LN0_ and LN1_ only are used.  The
+ * register is automatically cleared at the start of training. Each field
+ * reflects the contents of the coefficient update field in the lane's
+ * most recently received training frame. This register should not be
+ * written when link training is enabled, i.e. when
+ * CGX()_SPU()_BR_PMD_CONTROL[TRAIN_EN] is set. The lane fields in this
+ * register are indexed by logical PCS lane ID.
+ */
+union cgxx_spux_br_pmd_lp_cup {
+	u64 u;
+	struct cgxx_spux_br_pmd_lp_cup_s {
+		u64 ln0_cup                          : 16;
+		u64 ln1_cup                          : 16;
+		u64 ln2_cup                          : 16;
+		u64 ln3_cup                          : 16;
+	} s;
+	/* struct cgxx_spux_br_pmd_lp_cup_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_LP_CUP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_LP_CUP(u64 a)
+{
+	return 0x100b8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_lp_rep
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Link Partner Status Report Registers  This
+ * register implements MDIO register 1.153 of 802.3-2012 Section 5 CL45
+ * for 10GBASE-R and and of 802.3by-2016 CL45 for 25GBASE-R. Note that
+ * for 10G, 25G LN0_ only is used.  It implements  MDIO registers
+ * 1.1200-1.1203 for all other BASE-R modes (40G, 50G, 100G) per
+ * 802.3bj-2014 CL45. Note that for 50G LN0_ and LN1_ only are used.  The
+ * register is automatically cleared at the start of training. Each field
+ * reflects the contents of the coefficient update field in the lane's
+ * most recently received training frame. This register should not be
+ * written when link training is enabled, i.e. when
+ * CGX()_SPU()_BR_PMD_CONTROL[TRAIN_EN] is set. The lane fields in this
+ * register are indexed by logical PCS lane ID.
+ */
+union cgxx_spux_br_pmd_lp_rep {
+	u64 u;
+	struct cgxx_spux_br_pmd_lp_rep_s {
+		u64 ln0_rep                          : 16;
+		u64 ln1_rep                          : 16;
+		u64 ln2_rep                          : 16;
+		u64 ln3_rep                          : 16;
+	} s;
+	/* struct cgxx_spux_br_pmd_lp_rep_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_LP_REP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_LP_REP(u64 a)
+{
+	return 0x100c0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_pmd_status
+ *
+ * INTERNAL:CGX SPU BASE-R PMD Status Registers  The lane fields in this
+ * register are indexed by logical PCS lane ID. The lane 0 field (LN0_*)
+ * is valid for 10GBASE-R, 25GBASE-R, 40GBASE-R, 50GBASE-R and
+ * 100GBASE-R. The lane 1 field (LN1_*) is valid for 40GBASE-R, 50GBASE-R
+ * and 100GBASE-R. The remaining fields (LN2_*, LN3_*) are only valid for
+ * 40GBASE-R and 100GBASE-R.
+ */
+union cgxx_spux_br_pmd_status {
+	u64 u;
+	struct cgxx_spux_br_pmd_status_s {
+		u64 ln0_train_status                 : 4;
+		u64 ln1_train_status                 : 4;
+		u64 ln2_train_status                 : 4;
+		u64 ln3_train_status                 : 4;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_br_pmd_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_PMD_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_PMD_STATUS(u64 a)
+{
+	return 0x100b0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_status1
+ *
+ * CGX SPU BASE-R Status 1 Registers
+ */
+union cgxx_spux_br_status1 {
+	u64 u;
+	struct cgxx_spux_br_status1_s {
+		u64 blk_lock                         : 1;
+		u64 hi_ber                           : 1;
+		u64 prbs31                           : 1;
+		u64 prbs9                            : 1;
+		u64 reserved_4_11                    : 8;
+		u64 rcv_lnk                          : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct cgxx_spux_br_status1_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_STATUS1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_STATUS1(u64 a)
+{
+	return 0x10030 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_status2
+ *
+ * CGX SPU BASE-R Status 2 Registers This register implements a
+ * combination of the following IEEE 802.3 registers: * BASE-R PCS status
+ * 2 (MDIO address 3.33). * BASE-R BER high-order counter (MDIO address
+ * 3.44). * Errored-blocks high-order counter (MDIO address 3.45).  Note
+ * that the relative locations of some fields have been moved from IEEE
+ * 802.3 in order to make the register layout more software friendly: the
+ * BER counter high-order and low-order bits from sections 3.44 and 3.33
+ * have been combined into the contiguous, 22-bit [BER_CNT] field;
+ * likewise, the errored-blocks counter high-order and low-order bits
+ * from section 3.45 have been combined into the contiguous, 22-bit
+ * [ERR_BLKS] field.
+ */
+union cgxx_spux_br_status2 {
+	u64 u;
+	struct cgxx_spux_br_status2_s {
+		u64 reserved_0_13                    : 14;
+		u64 latched_ber                      : 1;
+		u64 latched_lock                     : 1;
+		u64 ber_cnt                          : 22;
+		u64 reserved_38_39                   : 2;
+		u64 err_blks                         : 22;
+		u64 reserved_62_63                   : 2;
+	} s;
+	/* struct cgxx_spux_br_status2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_STATUS2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_STATUS2(u64 a)
+{
+	return 0x10038 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_tp_control
+ *
+ * CGX SPU BASE-R Test-Pattern Control Registers Refer to the test
+ * pattern methodology described in 802.3 sections 49.2.8 and 82.2.10.
+ */
+union cgxx_spux_br_tp_control {
+	u64 u;
+	struct cgxx_spux_br_tp_control_s {
+		u64 dp_sel                           : 1;
+		u64 tp_sel                           : 1;
+		u64 rx_tp_en                         : 1;
+		u64 tx_tp_en                         : 1;
+		u64 prbs31_tx                        : 1;
+		u64 prbs31_rx                        : 1;
+		u64 prbs9_tx                         : 1;
+		u64 scramble_tp                      : 2;
+		u64 pr_tp_data_type                  : 1;
+		u64 reserved_10_63                   : 54;
+	} s;
+	/* struct cgxx_spux_br_tp_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_TP_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_TP_CONTROL(u64 a)
+{
+	return 0x10040 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_tp_err_cnt
+ *
+ * CGX SPU BASE-R Test-Pattern Error-Count Registers This register
+ * provides the BASE-R PCS test-pattern error counter.
+ */
+union cgxx_spux_br_tp_err_cnt {
+	u64 u;
+	struct cgxx_spux_br_tp_err_cnt_s {
+		u64 err_cnt                          : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_br_tp_err_cnt_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_TP_ERR_CNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_TP_ERR_CNT(u64 a)
+{
+	return 0x10048 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_tp_seed_a
+ *
+ * CGX SPU BASE-R Test-Pattern Seed A Registers Refer to the test pattern
+ * methodology described in 802.3 sections 49.2.8 and 82.2.10.
+ */
+union cgxx_spux_br_tp_seed_a {
+	u64 u;
+	struct cgxx_spux_br_tp_seed_a_s {
+		u64 tp_seed_a                        : 58;
+		u64 reserved_58_63                   : 6;
+	} s;
+	/* struct cgxx_spux_br_tp_seed_a_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_TP_SEED_A(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_TP_SEED_A(u64 a)
+{
+	return 0x10060 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_br_tp_seed_b
+ *
+ * CGX SPU BASE-R Test-Pattern Seed B Registers Refer to the test pattern
+ * methodology described in 802.3 sections 49.2.8 and 82.2.10.
+ */
+union cgxx_spux_br_tp_seed_b {
+	u64 u;
+	struct cgxx_spux_br_tp_seed_b_s {
+		u64 tp_seed_b                        : 58;
+		u64 reserved_58_63                   : 6;
+	} s;
+	/* struct cgxx_spux_br_tp_seed_b_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BR_TP_SEED_B(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BR_TP_SEED_B(u64 a)
+{
+	return 0x10068 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_bx_status
+ *
+ * CGX SPU BASE-X Status Registers
+ */
+union cgxx_spux_bx_status {
+	u64 u;
+	struct cgxx_spux_bx_status_s {
+		u64 lsync                            : 4;
+		u64 reserved_4_10                    : 7;
+		u64 pattst                           : 1;
+		u64 alignd                           : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct cgxx_spux_bx_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_BX_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_BX_STATUS(u64 a)
+{
+	return 0x10028 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_control1
+ *
+ * CGX SPU Control 1 Registers
+ */
+union cgxx_spux_control1 {
+	u64 u;
+	struct cgxx_spux_control1_s {
+		u64 reserved_0_1                     : 2;
+		u64 spd                              : 4;
+		u64 spdsel0                          : 1;
+		u64 reserved_7_10                    : 4;
+		u64 lo_pwr                           : 1;
+		u64 reserved_12                      : 1;
+		u64 spdsel1                          : 1;
+		u64 loopbck                          : 1;
+		u64 reset                            : 1;
+		u64 usxgmii_type                     : 3;
+		u64 usxgmii_rate                     : 3;
+		u64 disable_am                       : 1;
+		u64 reserved_23_63                   : 41;
+	} s;
+	struct cgxx_spux_control1_cn96xxp1 {
+		u64 reserved_0_1                     : 2;
+		u64 spd                              : 4;
+		u64 spdsel0                          : 1;
+		u64 reserved_7_10                    : 4;
+		u64 lo_pwr                           : 1;
+		u64 reserved_12                      : 1;
+		u64 spdsel1                          : 1;
+		u64 loopbck                          : 1;
+		u64 reset                            : 1;
+		u64 usxgmii_type                     : 3;
+		u64 usxgmii_rate                     : 3;
+		u64 reserved_22_63                   : 42;
+	} cn96xxp1;
+	/* struct cgxx_spux_control1_s cn96xxp3; */
+	/* struct cgxx_spux_control1_cn96xxp1 cnf95xxp1; */
+	struct cgxx_spux_control1_cnf95xxp2 {
+		u64 reserved_0_1                     : 2;
+		u64 spd                              : 4;
+		u64 spdsel0                          : 1;
+		u64 reserved_7_10                    : 4;
+		u64 lo_pwr                           : 1;
+		u64 reserved_12                      : 1;
+		u64 spdsel1                          : 1;
+		u64 loopbck                          : 1;
+		u64 reset                            : 1;
+		u64 usxgmii_type                     : 3;
+		u64 usxgmii_rate                     : 3;
+		u64 reserved_22                      : 1;
+		u64 reserved_23_63                   : 41;
+	} cnf95xxp2;
+};
+
+static inline u64 CGXX_SPUX_CONTROL1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_CONTROL1(u64 a)
+{
+	return 0x10000 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_control2
+ *
+ * CGX SPU Control 2 Registers
+ */
+union cgxx_spux_control2 {
+	u64 u;
+	struct cgxx_spux_control2_s {
+		u64 pcs_type                         : 4;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct cgxx_spux_control2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_CONTROL2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_CONTROL2(u64 a)
+{
+	return 0x10018 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_fec_abil
+ *
+ * CGX SPU Forward Error Correction Ability Registers
+ */
+union cgxx_spux_fec_abil {
+	u64 u;
+	struct cgxx_spux_fec_abil_s {
+		u64 fec_abil                         : 1;
+		u64 err_abil                         : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct cgxx_spux_fec_abil_s cn; */
+};
+
+static inline u64 CGXX_SPUX_FEC_ABIL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_FEC_ABIL(u64 a)
+{
+	return 0x100d8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_fec_control
+ *
+ * CGX SPU Forward Error Correction Control Registers
+ */
+union cgxx_spux_fec_control {
+	u64 u;
+	struct cgxx_spux_fec_control_s {
+		u64 fec_en                           : 2;
+		u64 err_en                           : 1;
+		u64 fec_byp_ind_en                   : 1;
+		u64 fec_byp_cor_en                   : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	/* struct cgxx_spux_fec_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_FEC_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_FEC_CONTROL(u64 a)
+{
+	return 0x100e0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_fec_ln#_rsfec_err
+ *
+ * CGX SPU Reed-Solomon FEC Symbol Error Counter for FEC Lanes 0-3
+ * Registers This register is valid only when Reed-Solomon FEC is
+ * enabled. The symbol error counters are defined in 802.3 section
+ * 91.6.11 (for 100G and extended to 50G) and 802.3by-2016 section
+ * 108.6.9 (for 25G and extended to USXGMII). The counter is reset to all
+ * zeros when the register is read, and held at all ones in case of
+ * overflow.  The reset operation takes precedence over the increment
+ * operation; if the register is read on the same clock cycle as an
+ * increment operation, the counter is reset to all zeros and the
+ * increment operation is lost. The counters are writable for test
+ * purposes, rather than read-only as specified in IEEE 802.3.
+ */
+union cgxx_spux_fec_lnx_rsfec_err {
+	u64 u;
+	struct cgxx_spux_fec_lnx_rsfec_err_s {
+		u64 symb_err_cnt                     : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_spux_fec_lnx_rsfec_err_s cn; */
+};
+
+static inline u64 CGXX_SPUX_FEC_LNX_RSFEC_ERR(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_FEC_LNX_RSFEC_ERR(u64 a, u64 b)
+{
+	return 0x10900 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_int
+ *
+ * CGX SPU Interrupt Registers
+ */
+union cgxx_spux_int {
+	u64 u;
+	struct cgxx_spux_int_s {
+		u64 rx_link_up                       : 1;
+		u64 rx_link_down                     : 1;
+		u64 err_blk                          : 1;
+		u64 bitlckls                         : 1;
+		u64 synlos                           : 1;
+		u64 algnlos                          : 1;
+		u64 dbg_sync                         : 1;
+		u64 bip_err                          : 1;
+		u64 fec_corr                         : 1;
+		u64 fec_uncorr                       : 1;
+		u64 an_page_rx                       : 1;
+		u64 an_link_good                     : 1;
+		u64 an_complete                      : 1;
+		u64 training_done                    : 1;
+		u64 training_failure                 : 1;
+		u64 fec_align_status                 : 1;
+		u64 rsfec_corr                       : 1;
+		u64 rsfec_uncorr                     : 1;
+		u64 hi_ser                           : 1;
+		u64 usx_an_lnk_st                    : 1;
+		u64 usx_an_cpt                       : 1;
+		u64 reserved_21_63                   : 43;
+	} s;
+	/* struct cgxx_spux_int_s cn; */
+};
+
+static inline u64 CGXX_SPUX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_INT(u64 a)
+{
+	return 0x10220 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_int_ena_w1c
+ *
+ * CGX SPU Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union cgxx_spux_int_ena_w1c {
+	u64 u;
+	struct cgxx_spux_int_ena_w1c_s {
+		u64 rx_link_up                       : 1;
+		u64 rx_link_down                     : 1;
+		u64 err_blk                          : 1;
+		u64 bitlckls                         : 1;
+		u64 synlos                           : 1;
+		u64 algnlos                          : 1;
+		u64 dbg_sync                         : 1;
+		u64 bip_err                          : 1;
+		u64 fec_corr                         : 1;
+		u64 fec_uncorr                       : 1;
+		u64 an_page_rx                       : 1;
+		u64 an_link_good                     : 1;
+		u64 an_complete                      : 1;
+		u64 training_done                    : 1;
+		u64 training_failure                 : 1;
+		u64 fec_align_status                 : 1;
+		u64 rsfec_corr                       : 1;
+		u64 rsfec_uncorr                     : 1;
+		u64 hi_ser                           : 1;
+		u64 usx_an_lnk_st                    : 1;
+		u64 usx_an_cpt                       : 1;
+		u64 reserved_21_63                   : 43;
+	} s;
+	/* struct cgxx_spux_int_ena_w1c_s cn; */
+};
+
+static inline u64 CGXX_SPUX_INT_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_INT_ENA_W1C(u64 a)
+{
+	return 0x10230 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_int_ena_w1s
+ *
+ * CGX SPU Interrupt Enable Set Registers This register sets interrupt
+ * enable bits.
+ */
+union cgxx_spux_int_ena_w1s {
+	u64 u;
+	struct cgxx_spux_int_ena_w1s_s {
+		u64 rx_link_up                       : 1;
+		u64 rx_link_down                     : 1;
+		u64 err_blk                          : 1;
+		u64 bitlckls                         : 1;
+		u64 synlos                           : 1;
+		u64 algnlos                          : 1;
+		u64 dbg_sync                         : 1;
+		u64 bip_err                          : 1;
+		u64 fec_corr                         : 1;
+		u64 fec_uncorr                       : 1;
+		u64 an_page_rx                       : 1;
+		u64 an_link_good                     : 1;
+		u64 an_complete                      : 1;
+		u64 training_done                    : 1;
+		u64 training_failure                 : 1;
+		u64 fec_align_status                 : 1;
+		u64 rsfec_corr                       : 1;
+		u64 rsfec_uncorr                     : 1;
+		u64 hi_ser                           : 1;
+		u64 usx_an_lnk_st                    : 1;
+		u64 usx_an_cpt                       : 1;
+		u64 reserved_21_63                   : 43;
+	} s;
+	/* struct cgxx_spux_int_ena_w1s_s cn; */
+};
+
+static inline u64 CGXX_SPUX_INT_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_INT_ENA_W1S(u64 a)
+{
+	return 0x10238 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_int_w1s
+ *
+ * CGX SPU Interrupt Set Registers This register sets interrupt bits.
+ */
+union cgxx_spux_int_w1s {
+	u64 u;
+	struct cgxx_spux_int_w1s_s {
+		u64 rx_link_up                       : 1;
+		u64 rx_link_down                     : 1;
+		u64 err_blk                          : 1;
+		u64 bitlckls                         : 1;
+		u64 synlos                           : 1;
+		u64 algnlos                          : 1;
+		u64 dbg_sync                         : 1;
+		u64 bip_err                          : 1;
+		u64 fec_corr                         : 1;
+		u64 fec_uncorr                       : 1;
+		u64 an_page_rx                       : 1;
+		u64 an_link_good                     : 1;
+		u64 an_complete                      : 1;
+		u64 training_done                    : 1;
+		u64 training_failure                 : 1;
+		u64 fec_align_status                 : 1;
+		u64 rsfec_corr                       : 1;
+		u64 rsfec_uncorr                     : 1;
+		u64 hi_ser                           : 1;
+		u64 usx_an_lnk_st                    : 1;
+		u64 usx_an_cpt                       : 1;
+		u64 reserved_21_63                   : 43;
+	} s;
+	/* struct cgxx_spux_int_w1s_s cn; */
+};
+
+static inline u64 CGXX_SPUX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_INT_W1S(u64 a)
+{
+	return 0x10228 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_ln#_br_bip_err_cnt
+ *
+ * CGX SPU 40,50,100GBASE-R BIP Error-Counter Registers This register
+ * implements the IEEE 802.3 BIP error-counter registers for PCS lanes
+ * 0-19 (3.200-3.203). It is valid only when the LPCS type is 40GBASE-R,
+ * 50GBASE-R, 100GBASE-R, (CGX()_CMR()_CONFIG[LMAC_TYPE]), and always
+ * returns 0x0 for all other LPCS types. The counters are indexed by the
+ * RX PCS lane number based on the alignment marker detected on each lane
+ * and captured in CGX()_SPU()_BR_LANE_MAP(). Each counter counts the BIP
+ * errors for its PCS lane, and is held at all ones in case of overflow.
+ * The counters are reset to all zeros when this register is read by
+ * software.  The reset operation takes precedence over the increment
+ * operation; if the register is read on the same clock cycle as an
+ * increment operation, the counter is reset to all zeros and the
+ * increment operation is lost. The counters are writable for test
+ * purposes, rather than read-only as specified in IEEE 802.3.
+ */
+union cgxx_spux_lnx_br_bip_err_cnt {
+	u64 u;
+	struct cgxx_spux_lnx_br_bip_err_cnt_s {
+		u64 bip_err_cnt                      : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_lnx_br_bip_err_cnt_s cn; */
+};
+
+static inline u64 CGXX_SPUX_LNX_BR_BIP_ERR_CNT(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_LNX_BR_BIP_ERR_CNT(u64 a, u64 b)
+{
+	return 0x10500 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_ln#_fec_corr_blks
+ *
+ * CGX SPU FEC Corrected-Blocks Counters 0-19 Registers This register is
+ * valid only when the LPCS type is BASE-R
+ * (CGX()_CMR()_CONFIG[LMAC_TYPE]) and applies to BASE-R FEC and Reed-
+ * Solomon FEC (RS-FEC). When BASE-R FEC is enabled, the FEC corrected-
+ * block counters are defined in IEEE 802.3 section 74.8.4.1. Each
+ * corrected-blocks counter increments by one for a corrected FEC block,
+ * i.e. an FEC block that has been received with invalid parity on the
+ * associated PCS lane and has been corrected by the FEC decoder. The
+ * counter is reset to all zeros when the register is read, and held at
+ * all ones in case of overflow.  The reset operation takes precedence
+ * over the increment operation; if the register is read on the same
+ * clock cycle as an increment operation, the counter is reset to all
+ * zeros and the increment operation is lost. The counters are writable
+ * for test purposes, rather than read-only as specified in IEEE 802.3.
+ */
+union cgxx_spux_lnx_fec_corr_blks {
+	u64 u;
+	struct cgxx_spux_lnx_fec_corr_blks_s {
+		u64 ln_corr_blks                     : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_spux_lnx_fec_corr_blks_s cn; */
+};
+
+static inline u64 CGXX_SPUX_LNX_FEC_CORR_BLKS(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_LNX_FEC_CORR_BLKS(u64 a, u64 b)
+{
+	return 0x10700 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_ln#_fec_uncorr_blks
+ *
+ * CGX SPU FEC Uncorrected-Blocks Counters 0-19 Registers This register
+ * is valid only when the LPCS type is BASE-R
+ * (CGX()_CMR()_CONFIG[LMAC_TYPE]) and applies to BASE-R FEC and Reed-
+ * Solomon FEC (RS-FEC). When BASE-R FEC is enabled, the FEC corrected-
+ * block counters are defined in IEEE 802.3 section 74.8.4.2. Each
+ * uncorrected-blocks counter increments by one for an uncorrected FEC
+ * block, i.e. an FEC block that has been received with invalid parity on
+ * the associated PCS lane and has not been corrected by the FEC decoder.
+ * The counter is reset to all zeros when the register is read, and held
+ * at all ones in case of overflow.  The reset operation takes precedence
+ * over the increment operation; if the register is read on the same
+ * clock cycle as an increment operation, the counter is reset to all
+ * zeros and the increment operation is lost. The counters are writable
+ * for test purposes, rather than read-only as specified in IEEE 802.3.
+ */
+union cgxx_spux_lnx_fec_uncorr_blks {
+	u64 u;
+	struct cgxx_spux_lnx_fec_uncorr_blks_s {
+		u64 ln_uncorr_blks                   : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_spux_lnx_fec_uncorr_blks_s cn; */
+};
+
+static inline u64 CGXX_SPUX_LNX_FEC_UNCORR_BLKS(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_LNX_FEC_UNCORR_BLKS(u64 a, u64 b)
+{
+	return 0x10800 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_lpcs_states
+ *
+ * CGX SPU BASE-X Transmit/Receive States Registers
+ */
+union cgxx_spux_lpcs_states {
+	u64 u;
+	struct cgxx_spux_lpcs_states_s {
+		u64 deskew_sm                        : 3;
+		u64 reserved_3                       : 1;
+		u64 deskew_am_found                  : 20;
+		u64 bx_rx_sm                         : 2;
+		u64 reserved_26_27                   : 2;
+		u64 br_rx_sm                         : 3;
+		u64 reserved_31_63                   : 33;
+	} s;
+	/* struct cgxx_spux_lpcs_states_s cn; */
+};
+
+static inline u64 CGXX_SPUX_LPCS_STATES(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_LPCS_STATES(u64 a)
+{
+	return 0x10208 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_misc_control
+ *
+ * CGX SPU Miscellaneous Control Registers "* RX logical PCS lane
+ * polarity vector \<3:0\> = [XOR_RXPLRT]\<3:0\> ^ {4{[RXPLRT]}}. * TX
+ * logical PCS lane polarity vector \<3:0\> = [XOR_TXPLRT]\<3:0\> ^
+ * {4{[TXPLRT]}}.  In short, keep [RXPLRT] and [TXPLRT] cleared, and use
+ * [XOR_RXPLRT] and [XOR_TXPLRT] fields to define the polarity per
+ * logical PCS lane. Only bit 0 of vector is used for 10GBASE-R, and only
+ * bits 1:0 of vector are used for RXAUI."
+ */
+union cgxx_spux_misc_control {
+	u64 u;
+	struct cgxx_spux_misc_control_s {
+		u64 txplrt                           : 1;
+		u64 rxplrt                           : 1;
+		u64 xor_txplrt                       : 4;
+		u64 xor_rxplrt                       : 4;
+		u64 intlv_rdisp                      : 1;
+		u64 skip_after_term                  : 1;
+		u64 rx_packet_dis                    : 1;
+		u64 rx_edet_signal_ok                : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct cgxx_spux_misc_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_MISC_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_MISC_CONTROL(u64 a)
+{
+	return 0x10218 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rsfec_corr
+ *
+ * CGX SPU Reed-Solomon FEC Corrected Codeword Counter Register This
+ * register implements the IEEE 802.3 RS-FEC corrected codewords counter
+ * described in 802.3 section 91.6.8 (for 100G and extended to 50G) and
+ * 802.3by-2016 section 108.6.7 (for 25G and extended to USXGMII).
+ */
+union cgxx_spux_rsfec_corr {
+	u64 u;
+	struct cgxx_spux_rsfec_corr_s {
+		u64 cw_cnt                           : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_spux_rsfec_corr_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RSFEC_CORR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RSFEC_CORR(u64 a)
+{
+	return 0x10088 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rsfec_status
+ *
+ * CGX SPU Reed-Solomon FEC Status Registers This register implements the
+ * IEEE 802.3 RS-FEC status and lane mapping registers as described in
+ * 802.3 section 91.6 (for 100G and extended to 50G) and 802.3by-2016
+ * section 108-6 (for 25G and extended to USXGMII).
+ */
+union cgxx_spux_rsfec_status {
+	u64 u;
+	struct cgxx_spux_rsfec_status_s {
+		u64 fec_lane_mapping                 : 8;
+		u64 fec_align_status                 : 1;
+		u64 amps_lock                        : 4;
+		u64 hi_ser                           : 1;
+		u64 fec_byp_ind_abil                 : 1;
+		u64 fec_byp_cor_abil                 : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_rsfec_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RSFEC_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RSFEC_STATUS(u64 a)
+{
+	return 0x10080 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rsfec_uncorr
+ *
+ * CGX SPU Reed-Solomon FEC Uncorrected Codeword Counter Register This
+ * register implements the IEEE 802.3 RS-FEC uncorrected codewords
+ * counter described in 802.3 section 91.6.9 (for 100G and extended to
+ * 50G) and 802.3by-2016 section 108.6.8 (for 25G and extended to
+ * USXGMII).
+ */
+union cgxx_spux_rsfec_uncorr {
+	u64 u;
+	struct cgxx_spux_rsfec_uncorr_s {
+		u64 cw_cnt                           : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_spux_rsfec_uncorr_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RSFEC_UNCORR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RSFEC_UNCORR(u64 a)
+{
+	return 0x10090 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rx_eee_wake
+ *
+ * INTERNAL: CGX SPU  RX EEE Wake Error Counter  Registers  Reserved.
+ * Internal: A counter that is incremented each time that the LPI receive
+ * state diagram enters the RX_WTF state indicating that a wake time
+ * fault has been detected.
+ */
+union cgxx_spux_rx_eee_wake {
+	u64 u;
+	struct cgxx_spux_rx_eee_wake_s {
+		u64 wtf_error_counter                : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_rx_eee_wake_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RX_EEE_WAKE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RX_EEE_WAKE(u64 a)
+{
+	return 0x103e0 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rx_lpi_timing
+ *
+ * INTERNAL: CGX SPU RX EEE LPI Timing Parameters Registers  Reserved.
+ * Internal: This register specifies receiver LPI timing parameters Tqr,
+ * Twr and Twtf.
+ */
+union cgxx_spux_rx_lpi_timing {
+	u64 u;
+	struct cgxx_spux_rx_lpi_timing_s {
+		u64 twtf                             : 20;
+		u64 twr                              : 20;
+		u64 tqr                              : 20;
+		u64 reserved_60_61                   : 2;
+		u64 rx_lpi_fw                        : 1;
+		u64 rx_lpi_en                        : 1;
+	} s;
+	/* struct cgxx_spux_rx_lpi_timing_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RX_LPI_TIMING(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RX_LPI_TIMING(u64 a)
+{
+	return 0x103c0 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rx_lpi_timing2
+ *
+ * INTERNAL: CGX SPU RX EEE LPI Timing2 Parameters Registers  Reserved.
+ * Internal: This register specifies receiver LPI timing parameters
+ * hold_off_timer.
+ */
+union cgxx_spux_rx_lpi_timing2 {
+	u64 u;
+	struct cgxx_spux_rx_lpi_timing2_s {
+		u64 hold_off_timer                   : 20;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct cgxx_spux_rx_lpi_timing2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RX_LPI_TIMING2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RX_LPI_TIMING2(u64 a)
+{
+	return 0x10420 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_rx_mrk_cnt
+ *
+ * CGX SPU Receiver Marker Interval Count Control Registers
+ */
+union cgxx_spux_rx_mrk_cnt {
+	u64 u;
+	struct cgxx_spux_rx_mrk_cnt_s {
+		u64 mrk_cnt                          : 20;
+		u64 reserved_20_43                   : 24;
+		u64 by_mrk_100g                      : 1;
+		u64 reserved_45_47                   : 3;
+		u64 ram_mrk_cnt                      : 8;
+		u64 reserved_56_63                   : 8;
+	} s;
+	/* struct cgxx_spux_rx_mrk_cnt_s cn; */
+};
+
+static inline u64 CGXX_SPUX_RX_MRK_CNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_RX_MRK_CNT(u64 a)
+{
+	return 0x103a0 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_spd_abil
+ *
+ * CGX SPU PCS Speed Ability Registers
+ */
+union cgxx_spux_spd_abil {
+	u64 u;
+	struct cgxx_spux_spd_abil_s {
+		u64 tengb                            : 1;
+		u64 tenpasst                         : 1;
+		u64 usxgmii                          : 1;
+		u64 twentyfivegb                     : 1;
+		u64 fortygb                          : 1;
+		u64 fiftygb                          : 1;
+		u64 hundredgb                        : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct cgxx_spux_spd_abil_s cn; */
+};
+
+static inline u64 CGXX_SPUX_SPD_ABIL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_SPD_ABIL(u64 a)
+{
+	return 0x10010 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_status1
+ *
+ * CGX SPU Status 1 Registers
+ */
+union cgxx_spux_status1 {
+	u64 u;
+	struct cgxx_spux_status1_s {
+		u64 reserved_0                       : 1;
+		u64 lpable                           : 1;
+		u64 rcv_lnk                          : 1;
+		u64 reserved_3_6                     : 4;
+		u64 flt                              : 1;
+		u64 rx_lpi_indication                : 1;
+		u64 tx_lpi_indication                : 1;
+		u64 rx_lpi_received                  : 1;
+		u64 tx_lpi_received                  : 1;
+		u64 reserved_12_63                   : 52;
+	} s;
+	/* struct cgxx_spux_status1_s cn; */
+};
+
+static inline u64 CGXX_SPUX_STATUS1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_STATUS1(u64 a)
+{
+	return 0x10008 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_status2
+ *
+ * CGX SPU Status 2 Registers
+ */
+union cgxx_spux_status2 {
+	u64 u;
+	struct cgxx_spux_status2_s {
+		u64 tengb_r                          : 1;
+		u64 tengb_x                          : 1;
+		u64 tengb_w                          : 1;
+		u64 tengb_t                          : 1;
+		u64 usxgmii_r                        : 1;
+		u64 twentyfivegb_r                   : 1;
+		u64 fortygb_r                        : 1;
+		u64 fiftygb_r                        : 1;
+		u64 hundredgb_r                      : 1;
+		u64 reserved_9                       : 1;
+		u64 rcvflt                           : 1;
+		u64 xmtflt                           : 1;
+		u64 reserved_12_13                   : 2;
+		u64 dev                              : 2;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_status2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_STATUS2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_STATUS2(u64 a)
+{
+	return 0x10020 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_tx_lpi_timing
+ *
+ * INTERNAL: CGX SPU TX EEE LPI Timing Parameters Registers  Reserved.
+ * Internal: Transmit LPI timing parameters Tsl, Tql and Tul
+ */
+union cgxx_spux_tx_lpi_timing {
+	u64 u;
+	struct cgxx_spux_tx_lpi_timing_s {
+		u64 tql                              : 19;
+		u64 reserved_19_31                   : 13;
+		u64 tul                              : 12;
+		u64 reserved_44_47                   : 4;
+		u64 tsl                              : 12;
+		u64 reserved_60                      : 1;
+		u64 tx_lpi_ignore_twl                : 1;
+		u64 tx_lpi_fw                        : 1;
+		u64 tx_lpi_en                        : 1;
+	} s;
+	/* struct cgxx_spux_tx_lpi_timing_s cn; */
+};
+
+static inline u64 CGXX_SPUX_TX_LPI_TIMING(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_TX_LPI_TIMING(u64 a)
+{
+	return 0x10400 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_tx_lpi_timing2
+ *
+ * INTERNAL: CGX SPU TX EEE LPI Timing2 Parameters Registers  Reserved.
+ * Internal: This register specifies transmit LPI timer parameters.
+ */
+union cgxx_spux_tx_lpi_timing2 {
+	u64 u;
+	struct cgxx_spux_tx_lpi_timing2_s {
+		u64 t1u                              : 8;
+		u64 reserved_8_11                    : 4;
+		u64 twl                              : 12;
+		u64 reserved_24_31                   : 8;
+		u64 twl2                             : 12;
+		u64 reserved_44_47                   : 4;
+		u64 tbyp                             : 12;
+		u64 reserved_60_63                   : 4;
+	} s;
+	/* struct cgxx_spux_tx_lpi_timing2_s cn; */
+};
+
+static inline u64 CGXX_SPUX_TX_LPI_TIMING2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_TX_LPI_TIMING2(u64 a)
+{
+	return 0x10440 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_tx_mrk_cnt
+ *
+ * CGX SPU Transmitter Marker Interval Count Control Registers
+ */
+union cgxx_spux_tx_mrk_cnt {
+	u64 u;
+	struct cgxx_spux_tx_mrk_cnt_s {
+		u64 mrk_cnt                          : 20;
+		u64 reserved_20_43                   : 24;
+		u64 by_mrk_100g                      : 1;
+		u64 reserved_45_47                   : 3;
+		u64 ram_mrk_cnt                      : 8;
+		u64 reserved_56_63                   : 8;
+	} s;
+	/* struct cgxx_spux_tx_mrk_cnt_s cn; */
+};
+
+static inline u64 CGXX_SPUX_TX_MRK_CNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_TX_MRK_CNT(u64 a)
+{
+	return 0x10380 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_adv
+ *
+ * CGX SPU USXGMII Autonegotiation Advertisement Registers Software
+ * programs this register with the contents of the AN-link code word base
+ * page to be transmitted during autonegotiation. Any write operations to
+ * this register prior to completion of autonegotiation should be
+ * followed by a renegotiation in order for the new values to take
+ * effect. Once autonegotiation has completed, software can examine this
+ * register along with CGX()_SPU()_USX_AN_ADV to determine the highest
+ * common denominator technology. The format for this register is from
+ * USXGMII Multiport specification section 1.1.2 Table 2.
+ */
+union cgxx_spux_usx_an_adv {
+	u64 u;
+	struct cgxx_spux_usx_an_adv_s {
+		u64 set                              : 1;
+		u64 reserved_1_6                     : 6;
+		u64 eee_clk_stop_abil                : 1;
+		u64 eee_abil                         : 1;
+		u64 spd                              : 3;
+		u64 dplx                             : 1;
+		u64 reserved_13_14                   : 2;
+		u64 lnk_st                           : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_usx_an_adv_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_ADV(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_ADV(u64 a)
+{
+	return 0x101d0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_control
+ *
+ * CGX SPU USXGMII Autonegotiation Control Register
+ */
+union cgxx_spux_usx_an_control {
+	u64 u;
+	struct cgxx_spux_usx_an_control_s {
+		u64 reserved_0_8                     : 9;
+		u64 rst_an                           : 1;
+		u64 reserved_10_11                   : 2;
+		u64 an_en                            : 1;
+		u64 reserved_13_14                   : 2;
+		u64 an_reset                         : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_usx_an_control_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_CONTROL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_CONTROL(u64 a)
+{
+	return 0x101c0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_expansion
+ *
+ * CGX SPU USXGMII Autonegotiation Expansion Register This register is
+ * only used to signal page reception.
+ */
+union cgxx_spux_usx_an_expansion {
+	u64 u;
+	struct cgxx_spux_usx_an_expansion_s {
+		u64 reserved_0                       : 1;
+		u64 an_page_received                 : 1;
+		u64 next_page_able                   : 1;
+		u64 reserved_3_63                    : 61;
+	} s;
+	/* struct cgxx_spux_usx_an_expansion_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_EXPANSION(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_EXPANSION(u64 a)
+{
+	return 0x101e0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_flow_ctrl
+ *
+ * CGX SPU USXGMII Flow Control Registers This register is used by
+ * software to affect USXGMII AN hardware behavior.
+ */
+union cgxx_spux_usx_an_flow_ctrl {
+	u64 u;
+	struct cgxx_spux_usx_an_flow_ctrl_s {
+		u64 start_idle_detect                : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct cgxx_spux_usx_an_flow_ctrl_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_FLOW_CTRL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_FLOW_CTRL(u64 a)
+{
+	return 0x101e8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_link_timer
+ *
+ * CGX SPU USXGMII Link Timer Registers This is the link timer register.
+ */
+union cgxx_spux_usx_an_link_timer {
+	u64 u;
+	struct cgxx_spux_usx_an_link_timer_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_usx_an_link_timer_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_LINK_TIMER(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_LINK_TIMER(u64 a)
+{
+	return 0x101f0 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_lp_abil
+ *
+ * CGX SPU USXGMII Autonegotiation Link-Partner Advertisement Registers
+ * This register captures the contents of the latest AN link code word
+ * base page received from the link partner during autonegotiation. This
+ * is register 5 per IEEE 802.3, Clause 37.
+ * CGX()_SPU()_USX_AN_EXPANSION[AN_PAGE_RECEIVED] is set when this
+ * register is updated by hardware.
+ */
+union cgxx_spux_usx_an_lp_abil {
+	u64 u;
+	struct cgxx_spux_usx_an_lp_abil_s {
+		u64 set                              : 1;
+		u64 reserved_1_6                     : 6;
+		u64 eee_clk_stop_abil                : 1;
+		u64 eee_abil                         : 1;
+		u64 spd                              : 3;
+		u64 dplx                             : 1;
+		u64 reserved_13_14                   : 2;
+		u64 lnk_st                           : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct cgxx_spux_usx_an_lp_abil_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_LP_ABIL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_LP_ABIL(u64 a)
+{
+	return 0x101d8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu#_usx_an_status
+ *
+ * CGX SPU USXGMII Autonegotiation Status Register
+ */
+union cgxx_spux_usx_an_status {
+	u64 u;
+	struct cgxx_spux_usx_an_status_s {
+		u64 extnd                            : 1;
+		u64 reserved_1                       : 1;
+		u64 lnk_st                           : 1;
+		u64 an_abil                          : 1;
+		u64 rmt_flt                          : 1;
+		u64 an_cpt                           : 1;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct cgxx_spux_usx_an_status_s cn; */
+};
+
+static inline u64 CGXX_SPUX_USX_AN_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPUX_USX_AN_STATUS(u64 a)
+{
+	return 0x101c8 + 0x40000 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu_dbg_control
+ *
+ * CGX SPU Debug Control Registers
+ */
+union cgxx_spu_dbg_control {
+	u64 u;
+	struct cgxx_spu_dbg_control_s {
+		u64 marker_rxp                       : 15;
+		u64 reserved_15                      : 1;
+		u64 scramble_dis                     : 1;
+		u64 reserved_17_18                   : 2;
+		u64 br_pmd_train_soft_en             : 1;
+		u64 reserved_20_27                   : 8;
+		u64 timestamp_norm_dis               : 1;
+		u64 an_nonce_match_dis               : 1;
+		u64 br_ber_mon_dis                   : 1;
+		u64 rf_cw_mon_erly_restart_dis       : 1;
+		u64 us_clk_period                    : 12;
+		u64 ms_clk_period                    : 12;
+		u64 reserved_56_63                   : 8;
+	} s;
+	struct cgxx_spu_dbg_control_cn96xxp1 {
+		u64 marker_rxp                       : 15;
+		u64 reserved_15                      : 1;
+		u64 scramble_dis                     : 1;
+		u64 reserved_17_18                   : 2;
+		u64 br_pmd_train_soft_en             : 1;
+		u64 reserved_20_27                   : 8;
+		u64 timestamp_norm_dis               : 1;
+		u64 an_nonce_match_dis               : 1;
+		u64 br_ber_mon_dis                   : 1;
+		u64 reserved_31                      : 1;
+		u64 us_clk_period                    : 12;
+		u64 ms_clk_period                    : 12;
+		u64 reserved_56_63                   : 8;
+	} cn96xxp1;
+	/* struct cgxx_spu_dbg_control_s cn96xxp3; */
+	/* struct cgxx_spu_dbg_control_cn96xxp1 cnf95xxp1; */
+	/* struct cgxx_spu_dbg_control_s cnf95xxp2; */
+};
+
+static inline u64 CGXX_SPU_DBG_CONTROL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPU_DBG_CONTROL(void)
+{
+	return 0x10300;
+}
+
+/**
+ * Register (RSL) cgx#_spu_sds#_skew_status
+ *
+ * CGX SPU SerDes Lane Skew Status Registers This register provides
+ * SerDes lane skew status. One register per physical SerDes lane.
+ */
+union cgxx_spu_sdsx_skew_status {
+	u64 u;
+	struct cgxx_spu_sdsx_skew_status_s {
+		u64 skew_status                      : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct cgxx_spu_sdsx_skew_status_s cn; */
+};
+
+static inline u64 CGXX_SPU_SDSX_SKEW_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPU_SDSX_SKEW_STATUS(u64 a)
+{
+	return 0x10340 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu_sds#_states
+ *
+ * CGX SPU SerDes States Registers This register provides SerDes lane
+ * states. One register per physical SerDes lane.
+ */
+union cgxx_spu_sdsx_states {
+	u64 u;
+	struct cgxx_spu_sdsx_states_s {
+		u64 bx_sync_sm                       : 4;
+		u64 br_sh_cnt                        : 11;
+		u64 br_block_lock                    : 1;
+		u64 br_sh_invld_cnt                  : 7;
+		u64 reserved_23                      : 1;
+		u64 fec_sync_cnt                     : 4;
+		u64 fec_block_sync                   : 1;
+		u64 reserved_29                      : 1;
+		u64 an_rx_sm                         : 2;
+		u64 an_arb_sm                        : 3;
+		u64 reserved_35                      : 1;
+		u64 train_lock_bad_markers           : 3;
+		u64 train_lock_found_1st_marker      : 1;
+		u64 train_frame_lock                 : 1;
+		u64 train_code_viol                  : 1;
+		u64 train_sm                         : 3;
+		u64 reserved_45_47                   : 3;
+		u64 am_lock_sm                       : 2;
+		u64 am_lock_invld_cnt                : 2;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct cgxx_spu_sdsx_states_s cn; */
+};
+
+static inline u64 CGXX_SPU_SDSX_STATES(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPU_SDSX_STATES(u64 a)
+{
+	return 0x10360 + 8 * a;
+}
+
+/**
+ * Register (RSL) cgx#_spu_usxgmii_control
+ *
+ * CGX SPU Common USXGMII Control Register This register is the common
+ * control register that enables USXGMII Mode. The fields in this
+ * register are preserved across any LMAC soft-resets. For an LMAC in
+ * soft- reset state in USXGMII mode, the CGX will transmit Remote Fault
+ * BASE-R blocks.
+ */
+union cgxx_spu_usxgmii_control {
+	u64 u;
+	struct cgxx_spu_usxgmii_control_s {
+		u64 enable                           : 1;
+		u64 usxgmii_type                     : 3;
+		u64 sds_id                           : 2;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct cgxx_spu_usxgmii_control_s cn; */
+};
+
+static inline u64 CGXX_SPU_USXGMII_CONTROL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 CGXX_SPU_USXGMII_CONTROL(void)
+{
+	return 0x10920;
+}
+
+#endif /* __CSRS_CGX_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-lmt.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-lmt.h
new file mode 100644
index 000000000..625470b2d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-lmt.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_LMT_H__
+#define __CSRS_LMT_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * LMT.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Register (RVU_PFVF_BAR2) lmt_lf_lmtcancel
+ *
+ * RVU VF LMT Cancel Register
+ */
+union lmt_lf_lmtcancel {
+	u64 u;
+	struct lmt_lf_lmtcancel_s {
+		u64 data                             : 64;
+	} s;
+	/* struct lmt_lf_lmtcancel_s cn; */
+};
+
+static inline u64 LMT_LF_LMTCANCEL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 LMT_LF_LMTCANCEL(void)
+{
+	return 0x400;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) lmt_lf_lmtline#
+ *
+ * RVU VF LMT Line Registers
+ */
+union lmt_lf_lmtlinex {
+	u64 u;
+	struct lmt_lf_lmtlinex_s {
+		u64 data                             : 64;
+	} s;
+	/* struct lmt_lf_lmtlinex_s cn; */
+};
+
+static inline u64 LMT_LF_LMTLINEX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 LMT_LF_LMTLINEX(u64 a)
+{
+	return 0 + 8 * a;
+}
+
+#endif /* __CSRS_LMT_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-mio_emm.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-mio_emm.h
new file mode 100644
index 000000000..a5a474083
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-mio_emm.h
@@ -0,0 +1,1193 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_MIO_EMM_H__
+#define __CSRS_MIO_EMM_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * MIO_EMM.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Enumeration mio_emm_bar_e
+ *
+ * eMMC Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8_SIZE 0x800000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9_SIZE 0x10000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4 (0x87e009f00000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration mio_emm_int_vec_e
+ *
+ * eMMC MSI-X Vector Enumeration Enumerates the MSI-X interrupt vectors.
+ */
+#define MIO_EMM_INT_VEC_E_DMA_INT_DONE (8)
+#define MIO_EMM_INT_VEC_E_DMA_INT_FIFO (7)
+#define MIO_EMM_INT_VEC_E_EMM_BUF_DONE (0)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_DONE (1)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_ERR (3)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_DONE (2)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_ERR (4)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_DONE (5)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_ERR (6)
+#define MIO_EMM_INT_VEC_E_NCB_FLT (9)
+#define MIO_EMM_INT_VEC_E_NCB_RAS (0xa)
+
+/**
+ * Register (RSL) mio_emm_access_wdog
+ *
+ * eMMC Access Watchdog Register
+ */
+union mio_emm_access_wdog {
+	u64 u;
+	struct mio_emm_access_wdog_s {
+		u64 clk_cnt                          : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct mio_emm_access_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+{
+	return 0x20f0;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_dat
+ *
+ * eMMC Data Buffer Access Register
+ */
+union mio_emm_buf_dat {
+	u64 u;
+	struct mio_emm_buf_dat_s {
+		u64 dat                              : 64;
+	} s;
+	/* struct mio_emm_buf_dat_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_DAT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_DAT(void)
+{
+	return 0x20e8;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_idx
+ *
+ * eMMC Data Buffer Address Register
+ */
+union mio_emm_buf_idx {
+	u64 u;
+	struct mio_emm_buf_idx_s {
+		u64 offset                           : 6;
+		u64 buf_num                          : 1;
+		u64 reserved_7_15                    : 9;
+		u64 inc                              : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct mio_emm_buf_idx_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_IDX(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_IDX(void)
+{
+	return 0x20e0;
+}
+
+/**
+ * Register (RSL) mio_emm_calb
+ *
+ * eMMC Calbration Register This register initiates delay line
+ * characterization.
+ */
+union mio_emm_calb {
+	u64 u;
+	struct mio_emm_calb_s {
+		u64 start                            : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct mio_emm_calb_s cn; */
+};
+
+static inline u64 MIO_EMM_CALB(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CALB(void)
+{
+	return 0x20c0;
+}
+
+/**
+ * Register (RSL) mio_emm_cfg
+ *
+ * eMMC Configuration Register
+ */
+union mio_emm_cfg {
+	u64 u;
+	struct mio_emm_cfg_s {
+		u64 bus_ena                          : 4;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct mio_emm_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CFG(void)
+{
+	return 0x2000;
+}
+
+/**
+ * Register (RSL) mio_emm_cmd
+ *
+ * eMMC Command Register
+ */
+union mio_emm_cmd {
+	u64 u;
+	struct mio_emm_cmd_s {
+		u64 arg                              : 32;
+		u64 cmd_idx                          : 6;
+		u64 rtype_xor                        : 3;
+		u64 ctype_xor                        : 2;
+		u64 reserved_43_48                   : 6;
+		u64 offset                           : 6;
+		u64 dbuf                             : 1;
+		u64 reserved_56_58                   : 3;
+		u64 cmd_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 skip_busy                        : 1;
+		u64 reserved_63                      : 1;
+	} s;
+	/* struct mio_emm_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_CMD(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CMD(void)
+{
+	return 0x2058;
+}
+
+/**
+ * Register (RSL) mio_emm_comp
+ *
+ * eMMC Compensation Register
+ */
+union mio_emm_comp {
+	u64 u;
+	struct mio_emm_comp_s {
+		u64 nctl                             : 3;
+		u64 reserved_3_7                     : 5;
+		u64 pctl                             : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct mio_emm_comp_s cn; */
+};
+
+static inline u64 MIO_EMM_COMP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_COMP(void)
+{
+	return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_debug
+ *
+ * eMMC Debug Register
+ */
+union mio_emm_debug {
+	u64 u;
+	struct mio_emm_debug_s {
+		u64 clk_on                           : 1;
+		u64 reserved_1_7                     : 7;
+		u64 cmd_sm                           : 4;
+		u64 data_sm                          : 4;
+		u64 dma_sm                           : 4;
+		u64 emmc_clk_disable                 : 1;
+		u64 rdsync_rst                       : 1;
+		u64 reserved_22_63                   : 42;
+	} s;
+	struct mio_emm_debug_cn96xxp1 {
+		u64 clk_on                           : 1;
+		u64 reserved_1_7                     : 7;
+		u64 cmd_sm                           : 4;
+		u64 data_sm                          : 4;
+		u64 dma_sm                           : 4;
+		u64 reserved_20_63                   : 44;
+	} cn96xxp1;
+	/* struct mio_emm_debug_s cn96xxp3; */
+	/* struct mio_emm_debug_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 MIO_EMM_DEBUG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DEBUG(void)
+{
+	return 0x20f8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma
+ *
+ * eMMC External DMA Configuration Register
+ */
+union mio_emm_dma {
+	u64 u;
+	struct mio_emm_dma_s {
+		u64 card_addr                        : 32;
+		u64 block_cnt                        : 16;
+		u64 multi                            : 1;
+		u64 rw                               : 1;
+		u64 rel_wr                           : 1;
+		u64 thres                            : 6;
+		u64 dat_null                         : 1;
+		u64 sector                           : 1;
+		u64 dma_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 skip_busy                        : 1;
+		u64 extra_args                       : 1;
+	} s;
+	struct mio_emm_dma_cn8 {
+		u64 card_addr                        : 32;
+		u64 block_cnt                        : 16;
+		u64 multi                            : 1;
+		u64 rw                               : 1;
+		u64 rel_wr                           : 1;
+		u64 thres                            : 6;
+		u64 dat_null                         : 1;
+		u64 sector                           : 1;
+		u64 dma_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 skip_busy                        : 1;
+		u64 reserved_63                      : 1;
+	} cn8;
+	struct mio_emm_dma_cn9 {
+		u64 card_addr                        : 32;
+		u64 block_cnt                        : 16;
+		u64 multi                            : 1;
+		u64 rw                               : 1;
+		u64 reserved_50                      : 1;
+		u64 thres                            : 6;
+		u64 dat_null                         : 1;
+		u64 sector                           : 1;
+		u64 dma_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 skip_busy                        : 1;
+		u64 extra_args                       : 1;
+	} cn9;
+};
+
+static inline u64 MIO_EMM_DMA(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA(void)
+{
+	return 0x2050;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_adr
+ *
+ * eMMC DMA Address Register This register sets the address for eMMC/SD
+ * flash transfers to/from memory. Sixty-four-bit operations must be used
+ * to access this register. This register is updated by the DMA hardware
+ * and can be reloaded by the values placed in the MIO_EMM_DMA_FIFO_ADR.
+ */
+union mio_emm_dma_adr {
+	u64 u;
+	struct mio_emm_dma_adr_s {
+		u64 adr                              : 53;
+		u64 reserved_53_63                   : 11;
+	} s;
+	struct mio_emm_dma_adr_cn8 {
+		u64 adr                              : 49;
+		u64 reserved_49_63                   : 15;
+	} cn8;
+	/* struct mio_emm_dma_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_ADR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ADR(void)
+{
+	return 0x188;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_arg
+ *
+ * eMMC External DMA Extra Arguments Register
+ */
+union mio_emm_dma_arg {
+	u64 u;
+	struct mio_emm_dma_arg_s {
+		u64 cmd23_args                       : 8;
+		u64 force_pgm                        : 1;
+		u64 context_id                       : 4;
+		u64 tag_req                          : 1;
+		u64 pack_cmd                         : 1;
+		u64 rel_wr                           : 1;
+		u64 alt_cmd                          : 6;
+		u64 skip_blk_cmd                     : 1;
+		u64 reserved_23_31                   : 9;
+		u64 alt_cmd_arg                      : 32;
+	} s;
+	/* struct mio_emm_dma_arg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_ARG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ARG(void)
+{
+	return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_cfg
+ *
+ * eMMC DMA Configuration Register This register controls the internal
+ * DMA engine used with the eMMC/SD flash controller. Sixty- four-bit
+ * operations must be used to access this register. This register is
+ * updated by the hardware DMA engine and can also be reloaded by writes
+ * to the MIO_EMM_DMA_FIFO_CMD register.
+ */
+union mio_emm_dma_cfg {
+	u64 u;
+	struct mio_emm_dma_cfg_s {
+		u64 reserved_0_35                    : 36;
+		u64 size                             : 20;
+		u64 endian                           : 1;
+		u64 swap8                            : 1;
+		u64 swap16                           : 1;
+		u64 swap32                           : 1;
+		u64 reserved_60                      : 1;
+		u64 clr                              : 1;
+		u64 rw                               : 1;
+		u64 en                               : 1;
+	} s;
+	/* struct mio_emm_dma_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_CFG(void)
+{
+	return 0x180;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_adr
+ *
+ * eMMC Internal DMA FIFO Address Register This register specifies the
+ * internal address that is loaded into the eMMC internal DMA FIFO. The
+ * FIFO is used to queue up operations for the
+ * MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR when the DMA completes successfully.
+ */
+union mio_emm_dma_fifo_adr {
+	u64 u;
+	struct mio_emm_dma_fifo_adr_s {
+		u64 reserved_0_2                     : 3;
+		u64 adr                              : 50;
+		u64 reserved_53_63                   : 11;
+	} s;
+	struct mio_emm_dma_fifo_adr_cn8 {
+		u64 reserved_0_2                     : 3;
+		u64 adr                              : 46;
+		u64 reserved_49_63                   : 15;
+	} cn8;
+	/* struct mio_emm_dma_fifo_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+{
+	return 0x170;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cfg
+ *
+ * eMMC Internal DMA FIFO Configuration Register This register controls
+ * DMA FIFO operations.
+ */
+union mio_emm_dma_fifo_cfg {
+	u64 u;
+	struct mio_emm_dma_fifo_cfg_s {
+		u64 count                            : 5;
+		u64 reserved_5_7                     : 3;
+		u64 int_lvl                          : 5;
+		u64 reserved_13_15                   : 3;
+		u64 clr                              : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct mio_emm_dma_fifo_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+{
+	return 0x160;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cmd
+ *
+ * eMMC Internal DMA FIFO Command Register This register specifies a
+ * command that is loaded into the eMMC internal DMA FIFO.  The FIFO is
+ * used to queue up operations for the MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR
+ * when the DMA completes successfully. Writes to this register store
+ * both the MIO_EMM_DMA_FIFO_CMD and the MIO_EMM_DMA_FIFO_ADR contents
+ * into the FIFO and increment the MIO_EMM_DMA_FIFO_CFG[COUNT] field.
+ * Note: This register has a similar format to MIO_EMM_DMA_CFG with the
+ * exception that the EN and CLR fields are absent. These are supported
+ * in MIO_EMM_DMA_FIFO_CFG.
+ */
+union mio_emm_dma_fifo_cmd {
+	u64 u;
+	struct mio_emm_dma_fifo_cmd_s {
+		u64 reserved_0_35                    : 36;
+		u64 size                             : 20;
+		u64 endian                           : 1;
+		u64 swap8                            : 1;
+		u64 swap16                           : 1;
+		u64 swap32                           : 1;
+		u64 intdis                           : 1;
+		u64 reserved_61                      : 1;
+		u64 rw                               : 1;
+		u64 reserved_63                      : 1;
+	} s;
+	/* struct mio_emm_dma_fifo_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+{
+	return 0x178;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int
+ *
+ * eMMC DMA Interrupt Register Sixty-four-bit operations must be used to
+ * access this register.
+ */
+union mio_emm_dma_int {
+	u64 u;
+	struct mio_emm_dma_int_s {
+		u64 done                             : 1;
+		u64 fifo                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct mio_emm_dma_int_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT(void)
+{
+	return 0x190;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1c
+ *
+ * eMMC DMA Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union mio_emm_dma_int_ena_w1c {
+	u64 u;
+	struct mio_emm_dma_int_ena_w1c_s {
+		u64 done                             : 1;
+		u64 fifo                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct mio_emm_dma_int_ena_w1c_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+{
+	return 0x1a8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1s
+ *
+ * eMMC DMA Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union mio_emm_dma_int_ena_w1s {
+	u64 u;
+	struct mio_emm_dma_int_ena_w1s_s {
+		u64 done                             : 1;
+		u64 fifo                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct mio_emm_dma_int_ena_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+{
+	return 0x1a0;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_w1s
+ *
+ * eMMC DMA Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_dma_int_w1s {
+	u64 u;
+	struct mio_emm_dma_int_w1s_s {
+		u64 done                             : 1;
+		u64 fifo                             : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct mio_emm_dma_int_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+{
+	return 0x198;
+}
+
+/**
+ * Register (RSL) mio_emm_int
+ *
+ * eMMC Interrupt Register
+ */
+union mio_emm_int {
+	u64 u;
+	struct mio_emm_int_s {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 ncb_flt                          : 1;
+		u64 ncb_ras                          : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	struct mio_emm_int_cn8 {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 reserved_7_63                    : 57;
+	} cn8;
+	/* struct mio_emm_int_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT(void)
+{
+	return 0x2078;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1c
+ *
+ * eMMC Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union mio_emm_int_ena_w1c {
+	u64 u;
+	struct mio_emm_int_ena_w1c_s {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 ncb_flt                          : 1;
+		u64 ncb_ras                          : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	struct mio_emm_int_ena_w1c_cn8 {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 reserved_7_63                    : 57;
+	} cn8;
+	/* struct mio_emm_int_ena_w1c_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+{
+	return 0x20b8;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1s
+ *
+ * eMMC Interrupt Enable Set Register This register sets interrupt enable
+ * bits.
+ */
+union mio_emm_int_ena_w1s {
+	u64 u;
+	struct mio_emm_int_ena_w1s_s {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 ncb_flt                          : 1;
+		u64 ncb_ras                          : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	struct mio_emm_int_ena_w1s_cn8 {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 reserved_7_63                    : 57;
+	} cn8;
+	/* struct mio_emm_int_ena_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+{
+	return 0x20b0;
+}
+
+/**
+ * Register (RSL) mio_emm_int_w1s
+ *
+ * eMMC Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_int_w1s {
+	u64 u;
+	struct mio_emm_int_w1s_s {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 ncb_flt                          : 1;
+		u64 ncb_ras                          : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	struct mio_emm_int_w1s_cn8 {
+		u64 buf_done                         : 1;
+		u64 cmd_done                         : 1;
+		u64 dma_done                         : 1;
+		u64 cmd_err                          : 1;
+		u64 dma_err                          : 1;
+		u64 switch_done                      : 1;
+		u64 switch_err                       : 1;
+		u64 reserved_7_63                    : 57;
+	} cn8;
+	/* struct mio_emm_int_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_W1S(void)
+{
+	return 0x2080;
+}
+
+/**
+ * Register (RSL) mio_emm_io_ctl
+ *
+ * eMMC I/O Control Register
+ */
+union mio_emm_io_ctl {
+	u64 u;
+	struct mio_emm_io_ctl_s {
+		u64 slew                             : 1;
+		u64 reserved_1                       : 1;
+		u64 drive                            : 2;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct mio_emm_io_ctl_s cn; */
+};
+
+static inline u64 MIO_EMM_IO_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_IO_CTL(void)
+{
+	return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_mode#
+ *
+ * eMMC Operating Mode Register
+ */
+union mio_emm_modex {
+	u64 u;
+	struct mio_emm_modex_s {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 clk_swap                         : 1;
+		u64 reserved_37_39                   : 3;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 hs200_timing                     : 1;
+		u64 hs400_timing                     : 1;
+		u64 reserved_51_63                   : 13;
+	} s;
+	struct mio_emm_modex_cn8 {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 reserved_36_39                   : 4;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 reserved_49_63                   : 15;
+	} cn8;
+	struct mio_emm_modex_cn96xxp1 {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 reserved_36_39                   : 4;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 hs200_timing                     : 1;
+		u64 hs400_timing                     : 1;
+		u64 reserved_51_63                   : 13;
+	} cn96xxp1;
+	/* struct mio_emm_modex_s cn96xxp3; */
+	/* struct mio_emm_modex_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_MODEX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MODEX(u64 a)
+{
+	return 0x2008 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_pba#
+ *
+ * eMMC MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table; the bit number is indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_pbax {
+	u64 u;
+	struct mio_emm_msix_pbax_s {
+		u64 pend                             : 64;
+	} s;
+	/* struct mio_emm_msix_pbax_s cn; */
+};
+
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+{
+	return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_addr
+ *
+ * eMMC MSI-X Vector-Table Address Register This register is the MSI-X
+ * vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_addr {
+	u64 u;
+	struct mio_emm_msix_vecx_addr_s {
+		u64 secvec                           : 1;
+		u64 reserved_1                       : 1;
+		u64 addr                             : 51;
+		u64 reserved_53_63                   : 11;
+	} s;
+	struct mio_emm_msix_vecx_addr_cn8 {
+		u64 secvec                           : 1;
+		u64 reserved_1                       : 1;
+		u64 addr                             : 47;
+		u64 reserved_49_63                   : 15;
+	} cn8;
+	/* struct mio_emm_msix_vecx_addr_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+{
+	return 0 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_ctl
+ *
+ * eMMC MSI-X Vector-Table Control and Data Register This register is the
+ * MSI-X vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_ctl {
+	u64 u;
+	struct mio_emm_msix_vecx_ctl_s {
+		u64 data                             : 32;
+		u64 mask                             : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	struct mio_emm_msix_vecx_ctl_cn8 {
+		u64 data                             : 20;
+		u64 reserved_20_31                   : 12;
+		u64 mask                             : 1;
+		u64 reserved_33_63                   : 31;
+	} cn8;
+	/* struct mio_emm_msix_vecx_ctl_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+{
+	return 8 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_rca
+ *
+ * eMMC Relative Card Address Register
+ */
+union mio_emm_rca {
+	u64 u;
+	struct mio_emm_rca_s {
+		u64 card_rca                         : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct mio_emm_rca_s cn; */
+};
+
+static inline u64 MIO_EMM_RCA(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RCA(void)
+{
+	return 0x20a0;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_hi
+ *
+ * eMMC Response Data High Register
+ */
+union mio_emm_rsp_hi {
+	u64 u;
+	struct mio_emm_rsp_hi_s {
+		u64 dat                              : 64;
+	} s;
+	/* struct mio_emm_rsp_hi_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_HI(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_HI(void)
+{
+	return 0x2070;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_lo
+ *
+ * eMMC Response Data Low Register
+ */
+union mio_emm_rsp_lo {
+	u64 u;
+	struct mio_emm_rsp_lo_s {
+		u64 dat                              : 64;
+	} s;
+	/* struct mio_emm_rsp_lo_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_LO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_LO(void)
+{
+	return 0x2068;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_sts
+ *
+ * eMMC Response Status Register
+ */
+union mio_emm_rsp_sts {
+	u64 u;
+	struct mio_emm_rsp_sts_s {
+		u64 cmd_done                         : 1;
+		u64 cmd_idx                          : 6;
+		u64 cmd_type                         : 2;
+		u64 rsp_type                         : 3;
+		u64 rsp_val                          : 1;
+		u64 rsp_bad_sts                      : 1;
+		u64 rsp_crc_err                      : 1;
+		u64 rsp_timeout                      : 1;
+		u64 stp_val                          : 1;
+		u64 stp_bad_sts                      : 1;
+		u64 stp_crc_err                      : 1;
+		u64 stp_timeout                      : 1;
+		u64 rsp_busybit                      : 1;
+		u64 blk_crc_err                      : 1;
+		u64 blk_timeout                      : 1;
+		u64 dbuf                             : 1;
+		u64 reserved_24_27                   : 4;
+		u64 dbuf_err                         : 1;
+		u64 reserved_29_54                   : 26;
+		u64 acc_timeout                      : 1;
+		u64 dma_pend                         : 1;
+		u64 dma_val                          : 1;
+		u64 switch_val                       : 1;
+		u64 cmd_val                          : 1;
+		u64 bus_id                           : 2;
+		u64 reserved_62_63                   : 2;
+	} s;
+	/* struct mio_emm_rsp_sts_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_STS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_STS(void)
+{
+	return 0x2060;
+}
+
+/**
+ * Register (RSL) mio_emm_sample
+ *
+ * eMMC Sampling Register
+ */
+union mio_emm_sample {
+	u64 u;
+	struct mio_emm_sample_s {
+		u64 dat_cnt                          : 10;
+		u64 reserved_10_15                   : 6;
+		u64 cmd_cnt                          : 10;
+		u64 reserved_26_63                   : 38;
+	} s;
+	/* struct mio_emm_sample_s cn; */
+};
+
+static inline u64 MIO_EMM_SAMPLE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SAMPLE(void)
+{
+	return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_sts_mask
+ *
+ * eMMC Status Mask Register
+ */
+union mio_emm_sts_mask {
+	u64 u;
+	struct mio_emm_sts_mask_s {
+		u64 sts_msk                          : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct mio_emm_sts_mask_s cn; */
+};
+
+static inline u64 MIO_EMM_STS_MASK(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_STS_MASK(void)
+{
+	return 0x2098;
+}
+
+/**
+ * Register (RSL) mio_emm_switch
+ *
+ * eMMC Operating Mode Switch Register This register allows software to
+ * change eMMC related parameters associated with a specific BUS_ID.  The
+ * MIO_EMM_MODE() registers contain the current setting for each BUS.
+ * This register is also used to switch the [CLK_HI] and [CLK_LO]
+ * settings associated with the common EMMC_CLK.  These settings can only
+ * be changed when [BUS_ID] = 0.
+ */
+union mio_emm_switch {
+	u64 u;
+	struct mio_emm_switch_s {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 clk_swap                         : 1;
+		u64 reserved_37_39                   : 3;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 hs200_timing                     : 1;
+		u64 hs400_timing                     : 1;
+		u64 reserved_51_55                   : 5;
+		u64 switch_err2                      : 1;
+		u64 switch_err1                      : 1;
+		u64 switch_err0                      : 1;
+		u64 switch_exe                       : 1;
+		u64 bus_id                           : 2;
+		u64 reserved_62_63                   : 2;
+	} s;
+	struct mio_emm_switch_cn8 {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 reserved_36_39                   : 4;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 reserved_49_55                   : 7;
+		u64 switch_err2                      : 1;
+		u64 switch_err1                      : 1;
+		u64 switch_err0                      : 1;
+		u64 switch_exe                       : 1;
+		u64 bus_id                           : 2;
+		u64 reserved_62_63                   : 2;
+	} cn8;
+	struct mio_emm_switch_cn96xxp1 {
+		u64 clk_lo                           : 16;
+		u64 clk_hi                           : 16;
+		u64 power_class                      : 4;
+		u64 reserved_36_39                   : 4;
+		u64 bus_width                        : 3;
+		u64 reserved_43_47                   : 5;
+		u64 hs_timing                        : 1;
+		u64 hs200_timing                     : 1;
+		u64 hs400_timing                     : 1;
+		u64 reserved_51_55                   : 5;
+		u64 switch_err2                      : 1;
+		u64 switch_err1                      : 1;
+		u64 switch_err0                      : 1;
+		u64 switch_exe                       : 1;
+		u64 bus_id                           : 2;
+		u64 reserved_62_63                   : 2;
+	} cn96xxp1;
+	/* struct mio_emm_switch_s cn96xxp3; */
+	/* struct mio_emm_switch_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_SWITCH(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SWITCH(void)
+{
+	return 0x2048;
+}
+
+/**
+ * Register (RSL) mio_emm_tap
+ *
+ * eMMC TAP Delay Register This register indicates the delay line
+ * characteristics.
+ */
+union mio_emm_tap {
+	u64 u;
+	struct mio_emm_tap_s {
+		u64 delay                            : 8;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct mio_emm_tap_s cn; */
+};
+
+static inline u64 MIO_EMM_TAP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TAP(void)
+{
+	return 0x20c8;
+}
+
+/**
+ * Register (RSL) mio_emm_timing
+ *
+ * eMMC Timing Register This register determines the number of tap delays
+ * the EMM_DAT, EMM_DS, and EMM_CMD lines are transmitted or received in
+ * relation to EMM_CLK. These values should only be changed when the eMMC
+ * bus is idle.
+ */
+union mio_emm_timing {
+	u64 u;
+	struct mio_emm_timing_s {
+		u64 data_out_tap                     : 6;
+		u64 reserved_6_15                    : 10;
+		u64 data_in_tap                      : 6;
+		u64 reserved_22_31                   : 10;
+		u64 cmd_out_tap                      : 6;
+		u64 reserved_38_47                   : 10;
+		u64 cmd_in_tap                       : 6;
+		u64 reserved_54_63                   : 10;
+	} s;
+	/* struct mio_emm_timing_s cn; */
+};
+
+static inline u64 MIO_EMM_TIMING(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TIMING(void)
+{
+	return 0x20d0;
+}
+
+/**
+ * Register (RSL) mio_emm_wdog
+ *
+ * eMMC Watchdog Register
+ */
+union mio_emm_wdog {
+	u64 u;
+	struct mio_emm_wdog_s {
+		u64 clk_cnt                          : 26;
+		u64 reserved_26_63                   : 38;
+	} s;
+	/* struct mio_emm_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_WDOG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_WDOG(void)
+{
+	return 0x2088;
+}
+
+#endif /* __CSRS_MIO_EMM_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-nix.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-nix.h
new file mode 100644
index 000000000..2908f2504
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-nix.h
@@ -0,0 +1,10404 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_NIX_H__
+#define __CSRS_NIX_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * NIX.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Enumeration nix_af_int_vec_e
+ *
+ * NIX Admin Function Interrupt Vector Enumeration Enumerates the NIX AF
+ * MSI-X interrupt vectors.
+ */
+#define NIX_AF_INT_VEC_E_AF_ERR (3)
+#define NIX_AF_INT_VEC_E_AQ_DONE (2)
+#define NIX_AF_INT_VEC_E_GEN (1)
+#define NIX_AF_INT_VEC_E_POISON (4)
+#define NIX_AF_INT_VEC_E_RVU (0)
+
+/**
+ * Enumeration nix_aq_comp_e
+ *
+ * NIX Completion Enumeration Enumerates the values of
+ * NIX_AQ_RES_S[COMPCODE].
+ */
+#define NIX_AQ_COMP_E_CTX_FAULT (4)
+#define NIX_AQ_COMP_E_CTX_POISON (3)
+#define NIX_AQ_COMP_E_GOOD (1)
+#define NIX_AQ_COMP_E_LOCKERR (5)
+#define NIX_AQ_COMP_E_NOTDONE (0)
+#define NIX_AQ_COMP_E_SQB_ALLOC_FAIL (6)
+#define NIX_AQ_COMP_E_SWERR (2)
+
+/**
+ * Enumeration nix_aq_ctype_e
+ *
+ * NIX Context Type Enumeration Enumerates NIX_AQ_INST_S[CTYPE] values.
+ */
+#define NIX_AQ_CTYPE_E_CQ (2)
+#define NIX_AQ_CTYPE_E_DYNO (5)
+#define NIX_AQ_CTYPE_E_MCE (3)
+#define NIX_AQ_CTYPE_E_RQ (0)
+#define NIX_AQ_CTYPE_E_RSS (4)
+#define NIX_AQ_CTYPE_E_SQ (1)
+
+/**
+ * Enumeration nix_aq_instop_e
+ *
+ * NIX Admin Queue Opcode Enumeration Enumerates NIX_AQ_INST_S[OP]
+ * values.
+ */
+#define NIX_AQ_INSTOP_E_INIT (1)
+#define NIX_AQ_INSTOP_E_LOCK (4)
+#define NIX_AQ_INSTOP_E_NOP (0)
+#define NIX_AQ_INSTOP_E_READ (3)
+#define NIX_AQ_INSTOP_E_UNLOCK (5)
+#define NIX_AQ_INSTOP_E_WRITE (2)
+
+/**
+ * Enumeration nix_chan_e
+ *
+ * NIX Channel Number Enumeration Enumerates the receive and transmit
+ * channels, and values of NIX_RX_PARSE_S[CHAN],
+ * NIX_SQ_CTX_S[DEFAULT_CHAN]. CNXXXX implements a subset of these
+ * channels. Specifically, only channels for links enumerated by
+ * NIX_LINK_E are implemented.  Internal: P2X/X2P channel enumeration for
+ * t9x.
+ */
+#define NIX_CHAN_E_CGXX_LMACX_CHX(a, b, c)	\
+	(0x800 + 0x100 * (a) + 0x10 * (b) + (c))
+#define NIX_CHAN_E_LBKX_CHX(a, b) (0 + 0x100 * (a) + (b))
+#define NIX_CHAN_E_RX(a) (0 + 0x100 * (a))
+#define NIX_CHAN_E_SDP_CHX(a) (0x700 + (a))
+
+/**
+ * Enumeration nix_colorresult_e
+ *
+ * NIX Color Result Enumeration Enumerates the values of
+ * NIX_MEM_RESULT_S[COLOR], NIX_AF_TL1()_MD_DEBUG1[COLOR] and
+ * NIX_AF_TL1()_MD_DEBUG1[COLOR].
+ */
+#define NIX_COLORRESULT_E_GREEN (0)
+#define NIX_COLORRESULT_E_RED_DROP (3)
+#define NIX_COLORRESULT_E_RED_SEND (2)
+#define NIX_COLORRESULT_E_YELLOW (1)
+
+/**
+ * Enumeration nix_cqerrint_e
+ *
+ * NIX Completion Queue Interrupt Enumeration Enumerates the bit index of
+ * NIX_CQ_CTX_S[CQ_ERR_INT,CQ_ERR_INT_ENA].
+ */
+#define NIX_CQERRINT_E_CQE_FAULT (2)
+#define NIX_CQERRINT_E_DOOR_ERR (0)
+#define NIX_CQERRINT_E_WR_FULL (1)
+
+/**
+ * Enumeration nix_intf_e
+ *
+ * NIX Interface Number Enumeration Enumerates the bit index of
+ * NIX_AF_STATUS[CALIBRATE_STATUS].
+ */
+#define NIX_INTF_E_CGXX(a) (0 + (a))
+#define NIX_INTF_E_LBKX(a) (3 + (a))
+#define NIX_INTF_E_SDP (4)
+
+/**
+ * Enumeration nix_lf_int_vec_e
+ *
+ * NIX Local Function Interrupt Vector Enumeration Enumerates the NIX
+ * MSI-X interrupt vectors per LF.
+ */
+#define NIX_LF_INT_VEC_E_CINTX(a) (0x40 + (a))
+#define NIX_LF_INT_VEC_E_ERR_INT (0x81)
+#define NIX_LF_INT_VEC_E_GINT (0x80)
+#define NIX_LF_INT_VEC_E_POISON (0x82)
+#define NIX_LF_INT_VEC_E_QINTX(a) (0 + (a))
+
+/**
+ * Enumeration nix_link_e
+ *
+ * NIX Link Number Enumeration Enumerates the receive and transmit links,
+ * and LINK index of NIX_AF_RX_LINK()_CFG, NIX_AF_RX_LINK()_WRR_CFG,
+ * NIX_AF_TX_LINK()_NORM_CREDIT, NIX_AF_TX_LINK()_HW_XOFF and
+ * NIX_AF_TL3_TL2()_LINK()_CFG.
+ */
+#define NIX_LINK_E_CGXX_LMACX(a, b) (0 + 4 * (a) + (b))
+#define NIX_LINK_E_LBKX(a) (0xc + (a))
+#define NIX_LINK_E_MC (0xe)
+#define NIX_LINK_E_SDP (0xd)
+
+/**
+ * Enumeration nix_lsoalg_e
+ *
+ * NIX Large Send Offload Algorithm Enumeration Enumerates
+ * NIX_AF_LSO_FORMAT()_FIELD()[ALG] values. Specifies algorithm for
+ * modifying the associated LSO packet field.
+ */
+#define NIX_LSOALG_E_ADD_OFFSET (3)
+#define NIX_LSOALG_E_ADD_PAYLEN (2)
+#define NIX_LSOALG_E_ADD_SEGNUM (1)
+#define NIX_LSOALG_E_NOP (0)
+#define NIX_LSOALG_E_TCP_FLAGS (4)
+
+/**
+ * Enumeration nix_maxsqesz_e
+ *
+ * NIX Maximum SQE Size Enumeration Enumerates the values of
+ * NIX_SQ_CTX_S[MAX_SQE_SIZE].
+ */
+#define NIX_MAXSQESZ_E_W16 (0)
+#define NIX_MAXSQESZ_E_W8 (1)
+
+/**
+ * Enumeration nix_mdtype_e
+ *
+ * NIX Meta Descriptor Type Enumeration Enumerates values of
+ * NIX_AF_MDQ()_MD_DEBUG[MD_TYPE].
+ */
+#define NIX_MDTYPE_E_FLUSH (1)
+#define NIX_MDTYPE_E_PMD (2)
+#define NIX_MDTYPE_E_RSVD (0)
+
+/**
+ * Enumeration nix_mnqerr_e
+ *
+ * NIX Meta-Descriptor Enqueue Error Enumeration Enumerates
+ * NIX_LF_MNQ_ERR_DBG[ERRCODE] values.
+ */
+#define NIX_MNQERR_E_CQ_QUERY_ERR (6)
+#define NIX_MNQERR_E_LSO_ERR (5)
+#define NIX_MNQERR_E_MAXLEN_ERR (8)
+#define NIX_MNQERR_E_MAX_SQE_SIZE_ERR (7)
+#define NIX_MNQERR_E_SQB_FAULT (2)
+#define NIX_MNQERR_E_SQB_POISON (3)
+#define NIX_MNQERR_E_SQE_SIZEM1_ZERO (9)
+#define NIX_MNQERR_E_SQ_CTX_FAULT (0)
+#define NIX_MNQERR_E_SQ_CTX_POISON (1)
+#define NIX_MNQERR_E_TOTAL_ERR (4)
+
+/**
+ * Enumeration nix_ndc_rx_port_e
+ *
+ * NIX Receive NDC Port Enumeration Enumerates NIX receive NDC
+ * (NDC_IDX_E::NIX()_RX) ports and the PORT index of
+ * NDC_AF_PORT()_RT()_RW()_REQ_PC and NDC_AF_PORT()_RT()_RW()_LAT_PC.
+ */
+#define NIX_NDC_RX_PORT_E_AQ (0)
+#define NIX_NDC_RX_PORT_E_CINT (2)
+#define NIX_NDC_RX_PORT_E_CQ (1)
+#define NIX_NDC_RX_PORT_E_MC (3)
+#define NIX_NDC_RX_PORT_E_PKT (4)
+#define NIX_NDC_RX_PORT_E_RQ (5)
+
+/**
+ * Enumeration nix_ndc_tx_port_e
+ *
+ * NIX Transmit NDC Port Enumeration Enumerates NIX transmit NDC
+ * (NDC_IDX_E::NIX()_TX) ports and the PORT index of
+ * NDC_AF_PORT()_RT()_RW()_REQ_PC and NDC_AF_PORT()_RT()_RW()_LAT_PC.
+ */
+#define NIX_NDC_TX_PORT_E_DEQ (3)
+#define NIX_NDC_TX_PORT_E_DMA (4)
+#define NIX_NDC_TX_PORT_E_ENQ (1)
+#define NIX_NDC_TX_PORT_E_LMT (0)
+#define NIX_NDC_TX_PORT_E_MNQ (2)
+#define NIX_NDC_TX_PORT_E_XQE (5)
+
+/**
+ * Enumeration nix_re_opcode_e
+ *
+ * NIX Receive Error Opcode Enumeration Enumerates
+ * NIX_RX_PARSE_S[ERRCODE] values when NIX_RX_PARSE_S[ERRLEV] =
+ * NPC_ERRLEV_E::RE.
+ */
+#define NIX_RE_OPCODE_E_OL2_LENMISM (0x12)
+#define NIX_RE_OPCODE_E_OVERSIZE (0x11)
+#define NIX_RE_OPCODE_E_RE_DMAPKT (0xf)
+#define NIX_RE_OPCODE_E_RE_FCS (7)
+#define NIX_RE_OPCODE_E_RE_FCS_RCV (8)
+#define NIX_RE_OPCODE_E_RE_JABBER (2)
+#define NIX_RE_OPCODE_E_RE_NONE (0)
+#define NIX_RE_OPCODE_E_RE_PARTIAL (1)
+#define NIX_RE_OPCODE_E_RE_RX_CTL (0xb)
+#define NIX_RE_OPCODE_E_RE_SKIP (0xc)
+#define NIX_RE_OPCODE_E_RE_TERMINATE (9)
+#define NIX_RE_OPCODE_E_UNDERSIZE (0x10)
+
+/**
+ * Enumeration nix_redalg_e
+ *
+ * NIX Red Algorithm Enumeration Enumerates the different algorithms of
+ * NIX_SEND_EXT_S[SHP_RA].
+ */
+#define NIX_REDALG_E_DISCARD (3)
+#define NIX_REDALG_E_SEND (1)
+#define NIX_REDALG_E_STALL (2)
+#define NIX_REDALG_E_STD (0)
+
+/**
+ * Enumeration nix_rqint_e
+ *
+ * NIX Receive Queue Interrupt Enumeration Enumerates the bit index of
+ * NIX_RQ_CTX_S[RQ_INT,RQ_INT_ENA].
+ */
+#define NIX_RQINT_E_DROP (0)
+#define NIX_RQINT_E_RX(a) (0 + (a))
+#define NIX_RQINT_E_RED (1)
+
+/**
+ * Enumeration nix_rx_actionop_e
+ *
+ * NIX Receive Action Opcode Enumeration Enumerates the values of
+ * NIX_RX_ACTION_S[OP].
+ */
+#define NIX_RX_ACTIONOP_E_DROP (0)
+#define NIX_RX_ACTIONOP_E_MCAST (3)
+#define NIX_RX_ACTIONOP_E_MIRROR (6)
+#define NIX_RX_ACTIONOP_E_PF_FUNC_DROP (5)
+#define NIX_RX_ACTIONOP_E_RSS (4)
+#define NIX_RX_ACTIONOP_E_UCAST (1)
+#define NIX_RX_ACTIONOP_E_UCAST_IPSEC (2)
+
+/**
+ * Enumeration nix_rx_mcop_e
+ *
+ * NIX Receive Multicast/Mirror Opcode Enumeration Enumerates the values
+ * of NIX_RX_MCE_S[OP].
+ */
+#define NIX_RX_MCOP_E_RQ (0)
+#define NIX_RX_MCOP_E_RSS (1)
+
+/**
+ * Enumeration nix_rx_perrcode_e
+ *
+ * NIX Receive Protocol Error Code Enumeration Enumerates
+ * NIX_RX_PARSE_S[ERRCODE] values when NIX_RX_PARSE_S[ERRLEV] =
+ * NPC_ERRLEV_E::NIX.
+ */
+#define NIX_RX_PERRCODE_E_BUFS_OFLOW (0xa)
+#define NIX_RX_PERRCODE_E_DATA_FAULT (8)
+#define NIX_RX_PERRCODE_E_IL3_LEN (0x20)
+#define NIX_RX_PERRCODE_E_IL4_CHK (0x22)
+#define NIX_RX_PERRCODE_E_IL4_LEN (0x21)
+#define NIX_RX_PERRCODE_E_IL4_PORT (0x23)
+#define NIX_RX_PERRCODE_E_MCAST_FAULT (4)
+#define NIX_RX_PERRCODE_E_MCAST_POISON (6)
+#define NIX_RX_PERRCODE_E_MEMOUT (9)
+#define NIX_RX_PERRCODE_E_MIRROR_FAULT (5)
+#define NIX_RX_PERRCODE_E_MIRROR_POISON (7)
+#define NIX_RX_PERRCODE_E_NPC_RESULT_ERR (2)
+#define NIX_RX_PERRCODE_E_OL3_LEN (0x10)
+#define NIX_RX_PERRCODE_E_OL4_CHK (0x12)
+#define NIX_RX_PERRCODE_E_OL4_LEN (0x11)
+#define NIX_RX_PERRCODE_E_OL4_PORT (0x13)
+
+/**
+ * Enumeration nix_send_status_e
+ *
+ * NIX Send Completion Status Enumeration Enumerates values of
+ * NIX_SEND_COMP_S[STATUS] and NIX_LF_SEND_ERR_DBG[ERRCODE].
+ */
+#define NIX_SEND_STATUS_E_DATA_FAULT (0x16)
+#define NIX_SEND_STATUS_E_DATA_POISON (0x17)
+#define NIX_SEND_STATUS_E_GOOD (0)
+#define NIX_SEND_STATUS_E_INVALID_SUBDC (0x14)
+#define NIX_SEND_STATUS_E_JUMP_FAULT (7)
+#define NIX_SEND_STATUS_E_JUMP_POISON (8)
+#define NIX_SEND_STATUS_E_LOCK_VIOL (0x21)
+#define NIX_SEND_STATUS_E_NPC_DROP_ACTION (0x20)
+#define NIX_SEND_STATUS_E_NPC_MCAST_ABORT (0x24)
+#define NIX_SEND_STATUS_E_NPC_MCAST_CHAN_ERR (0x23)
+#define NIX_SEND_STATUS_E_NPC_UCAST_CHAN_ERR (0x22)
+#define NIX_SEND_STATUS_E_NPC_VTAG_PTR_ERR (0x25)
+#define NIX_SEND_STATUS_E_NPC_VTAG_SIZE_ERR (0x26)
+#define NIX_SEND_STATUS_E_SEND_CRC_ERR (0x10)
+#define NIX_SEND_STATUS_E_SEND_EXT_ERR (6)
+#define NIX_SEND_STATUS_E_SEND_HDR_ERR (5)
+#define NIX_SEND_STATUS_E_SEND_IMM_ERR (0x11)
+#define NIX_SEND_STATUS_E_SEND_MEM_ERR (0x13)
+#define NIX_SEND_STATUS_E_SEND_MEM_FAULT (0x27)
+#define NIX_SEND_STATUS_E_SEND_SG_ERR (0x12)
+#define NIX_SEND_STATUS_E_SQB_FAULT (3)
+#define NIX_SEND_STATUS_E_SQB_POISON (4)
+#define NIX_SEND_STATUS_E_SQ_CTX_FAULT (1)
+#define NIX_SEND_STATUS_E_SQ_CTX_POISON (2)
+#define NIX_SEND_STATUS_E_SUBDC_ORDER_ERR (0x15)
+
+/**
+ * Enumeration nix_sendcrcalg_e
+ *
+ * NIX Send CRC Algorithm Enumeration Enumerates the CRC algorithm used,
+ * see NIX_SEND_CRC_S[ALG].
+ */
+#define NIX_SENDCRCALG_E_CRC32 (0)
+#define NIX_SENDCRCALG_E_CRC32C (1)
+#define NIX_SENDCRCALG_E_ONES16 (2)
+
+/**
+ * Enumeration nix_sendl3type_e
+ *
+ * NIX Send Layer 3 Header Type Enumeration Enumerates values of
+ * NIX_SEND_HDR_S[OL3TYPE], NIX_SEND_HDR_S[IL3TYPE]. Internal: Encoding
+ * matches DPDK TX IP types: \<pre\> PKT_TX_IP_CKSUM      (1ULL \<\< 54)
+ * PKT_TX_IPV4          (1ULL \<\< 55) PKT_TX_IPV6          (1ULL \<\<
+ * 56)  PKT_TX_OUTER_IP_CKSUM(1ULL \<\< 58) PKT_TX_OUTER_IPV4    (1ULL
+ * \<\< 59) PKT_TX_OUTER_IPV6    (1ULL \<\< 60) \</pre\>
+ */
+#define NIX_SENDL3TYPE_E_IP4 (2)
+#define NIX_SENDL3TYPE_E_IP4_CKSUM (3)
+#define NIX_SENDL3TYPE_E_IP6 (4)
+#define NIX_SENDL3TYPE_E_NONE (0)
+
+/**
+ * Enumeration nix_sendl4type_e
+ *
+ * NIX Send Layer 4 Header Type Enumeration Enumerates values of
+ * NIX_SEND_HDR_S[OL4TYPE], NIX_SEND_HDR_S[IL4TYPE]. Internal: Encoding
+ * matches DPDK TX L4 types. \<pre\> PKT_TX_L4_NO_CKSUM   (0ULL \<\< 52)
+ * // Disable L4 cksum of TX pkt. PKT_TX_TCP_CKSUM     (1ULL \<\< 52)  //
+ * TCP cksum of TX pkt. computed by nic. PKT_TX_SCTP_CKSUM    (2ULL \<\<
+ * 52)  // SCTP cksum of TX pkt. computed by nic. PKT_TX_UDP_CKSUM
+ * (3ULL \<\< 52)  // UDP cksum of TX pkt. computed by nic. \</pre\>
+ */
+#define NIX_SENDL4TYPE_E_NONE (0)
+#define NIX_SENDL4TYPE_E_SCTP_CKSUM (2)
+#define NIX_SENDL4TYPE_E_TCP_CKSUM (1)
+#define NIX_SENDL4TYPE_E_UDP_CKSUM (3)
+
+/**
+ * Enumeration nix_sendldtype_e
+ *
+ * NIX Send Load Type Enumeration Enumerates the load transaction types
+ * for reading segment bytes specified by NIX_SEND_SG_S[LD_TYPE] and
+ * NIX_SEND_JUMP_S[LD_TYPE].  Internal: The hardware implementation
+ * treats undefined encodings as LDD load type.
+ */
+#define NIX_SENDLDTYPE_E_LDD (0)
+#define NIX_SENDLDTYPE_E_LDT (1)
+#define NIX_SENDLDTYPE_E_LDWB (2)
+
+/**
+ * Enumeration nix_sendmemalg_e
+ *
+ * NIX Memory Modify Algorithm Enumeration Enumerates the different
+ * algorithms for modifying memory; see NIX_SEND_MEM_S[ALG]. mbufs_freed
+ * is the number of gather buffers freed to NPA for the send descriptor.
+ * See NIX_SEND_HDR_S[DF] and NIX_SEND_SG_S[I*].
+ */
+#define NIX_SENDMEMALG_E_ADD (8)
+#define NIX_SENDMEMALG_E_ADDLEN (0xa)
+#define NIX_SENDMEMALG_E_ADDMBUF (0xc)
+#define NIX_SENDMEMALG_E_SET (0)
+#define NIX_SENDMEMALG_E_SETRSLT (2)
+#define NIX_SENDMEMALG_E_SETTSTMP (1)
+#define NIX_SENDMEMALG_E_SUB (9)
+#define NIX_SENDMEMALG_E_SUBLEN (0xb)
+#define NIX_SENDMEMALG_E_SUBMBUF (0xd)
+
+/**
+ * Enumeration nix_sendmemdsz_e
+ *
+ * NIX Memory Data Size Enumeration Enumerates the datum size for
+ * modifying memory; see NIX_SEND_MEM_S[DSZ].
+ */
+#define NIX_SENDMEMDSZ_E_B16 (2)
+#define NIX_SENDMEMDSZ_E_B32 (1)
+#define NIX_SENDMEMDSZ_E_B64 (0)
+#define NIX_SENDMEMDSZ_E_B8 (3)
+
+/**
+ * Enumeration nix_sqint_e
+ *
+ * NIX Send Queue Interrupt Enumeration Enumerates the bit index of
+ * NIX_SQ_CTX_S[SQ_INT,SQ_INT_ENA].
+ */
+#define NIX_SQINT_E_LMT_ERR (0)
+#define NIX_SQINT_E_MNQ_ERR (1)
+#define NIX_SQINT_E_SEND_ERR (2)
+#define NIX_SQINT_E_SQB_ALLOC_FAIL (3)
+
+/**
+ * Enumeration nix_sqoperr_e
+ *
+ * NIX SQ Operation Error Enumeration Enumerates
+ * NIX_LF_SQ_OP_ERR_DBG[ERRCODE] values.
+ */
+#define NIX_SQOPERR_E_MAX_SQE_SIZE_ERR (4)
+#define NIX_SQOPERR_E_SQB_FAULT (7)
+#define NIX_SQOPERR_E_SQB_NULL (6)
+#define NIX_SQOPERR_E_SQE_OFLOW (5)
+#define NIX_SQOPERR_E_SQE_SIZEM1_ZERO (8)
+#define NIX_SQOPERR_E_SQ_CTX_FAULT (1)
+#define NIX_SQOPERR_E_SQ_CTX_POISON (2)
+#define NIX_SQOPERR_E_SQ_DISABLED (3)
+#define NIX_SQOPERR_E_SQ_OOR (0)
+
+/**
+ * Enumeration nix_stat_lf_rx_e
+ *
+ * NIX Local Function Receive Statistics Enumeration Enumerates the last
+ * index of NIX_AF_LF()_RX_STAT() and NIX_LF_RX_STAT().
+ */
+#define NIX_STAT_LF_RX_E_RX_BCAST (2)
+#define NIX_STAT_LF_RX_E_RX_DROP (4)
+#define NIX_STAT_LF_RX_E_RX_DROP_OCTS (5)
+#define NIX_STAT_LF_RX_E_RX_DRP_BCAST (8)
+#define NIX_STAT_LF_RX_E_RX_DRP_L3BCAST (0xa)
+#define NIX_STAT_LF_RX_E_RX_DRP_L3MCAST (0xb)
+#define NIX_STAT_LF_RX_E_RX_DRP_MCAST (9)
+#define NIX_STAT_LF_RX_E_RX_ERR (7)
+#define NIX_STAT_LF_RX_E_RX_FCS (6)
+#define NIX_STAT_LF_RX_E_RX_MCAST (3)
+#define NIX_STAT_LF_RX_E_RX_OCTS (0)
+#define NIX_STAT_LF_RX_E_RX_UCAST (1)
+
+/**
+ * Enumeration nix_stat_lf_tx_e
+ *
+ * NIX Local Function Transmit Statistics Enumeration Enumerates the
+ * index of NIX_AF_LF()_TX_STAT() and NIX_LF_TX_STAT(). These statistics
+ * do not account for packet replication due to NIX_TX_ACTION_S[OP] =
+ * NIX_TX_ACTIONOP_E::MCAST.
+ */
+#define NIX_STAT_LF_TX_E_TX_BCAST (1)
+#define NIX_STAT_LF_TX_E_TX_DROP (3)
+#define NIX_STAT_LF_TX_E_TX_MCAST (2)
+#define NIX_STAT_LF_TX_E_TX_OCTS (4)
+#define NIX_STAT_LF_TX_E_TX_UCAST (0)
+
+/**
+ * Enumeration nix_stype_e
+ *
+ * NIX SQB Caching Type Enumeration Enumerates the values of
+ * NIX_SQ_CTX_S[SQE_STYPE].
+ */
+#define NIX_STYPE_E_STF (0)
+#define NIX_STYPE_E_STP (2)
+#define NIX_STYPE_E_STT (1)
+
+/**
+ * Enumeration nix_subdc_e
+ *
+ * NIX Subdescriptor Operation Enumeration Enumerates send and receive
+ * subdescriptor codes. The codes differentiate subdescriptors within a
+ * NIX send or receive descriptor, excluding NIX_SEND_HDR_S for send and
+ * NIX_CQE_HDR_S/NIX_WQE_HDR_S for receive, which are determined by their
+ * position as the first subdescriptor, and NIX_RX_PARSE_S, which is
+ * determined by its position as the second subdescriptor.
+ */
+#define NIX_SUBDC_E_CRC (2)
+#define NIX_SUBDC_E_EXT (1)
+#define NIX_SUBDC_E_IMM (3)
+#define NIX_SUBDC_E_JUMP (6)
+#define NIX_SUBDC_E_MEM (5)
+#define NIX_SUBDC_E_NOP (0)
+#define NIX_SUBDC_E_SG (4)
+#define NIX_SUBDC_E_SOD (0xf)
+#define NIX_SUBDC_E_WORK (7)
+
+/**
+ * Enumeration nix_tx_actionop_e
+ *
+ * NIX Transmit Action Opcode Enumeration Enumerates the values of
+ * NIX_TX_ACTION_S[OP].
+ */
+#define NIX_TX_ACTIONOP_E_DROP (0)
+#define NIX_TX_ACTIONOP_E_DROP_VIOL (5)
+#define NIX_TX_ACTIONOP_E_MCAST (3)
+#define NIX_TX_ACTIONOP_E_UCAST_CHAN (2)
+#define NIX_TX_ACTIONOP_E_UCAST_DEFAULT (1)
+
+/**
+ * Enumeration nix_tx_vtagop_e
+ *
+ * NIX Transmit Vtag Opcode Enumeration Enumerates the values of
+ * NIX_TX_VTAG_ACTION_S[VTAG0_OP,VTAG1_OP].
+ */
+#define NIX_TX_VTAGOP_E_INSERT (1)
+#define NIX_TX_VTAGOP_E_NOP (0)
+#define NIX_TX_VTAGOP_E_REPLACE (2)
+
+/**
+ * Enumeration nix_txlayer_e
+ *
+ * NIX Transmit Layer Enumeration Enumerates the values of
+ * NIX_AF_LSO_FORMAT()_FIELD()[LAYER].
+ */
+#define NIX_TXLAYER_E_IL3 (2)
+#define NIX_TXLAYER_E_IL4 (3)
+#define NIX_TXLAYER_E_OL3 (0)
+#define NIX_TXLAYER_E_OL4 (1)
+
+/**
+ * Enumeration nix_vtagsize_e
+ *
+ * NIX Vtag Size Enumeration Enumerates the values of
+ * NIX_AF_TX_VTAG_DEF()_CTL[SIZE] and NIX_AF_LF()_RX_VTAG_TYPE()[SIZE].
+ */
+#define NIX_VTAGSIZE_E_T4 (0)
+#define NIX_VTAGSIZE_E_T8 (1)
+
+/**
+ * Enumeration nix_xqe_type_e
+ *
+ * NIX WQE/CQE Type Enumeration Enumerates the values of
+ * NIX_WQE_HDR_S[WQE_TYPE], NIX_CQE_HDR_S[CQE_TYPE].
+ */
+#define NIX_XQE_TYPE_E_INVALID (0)
+#define NIX_XQE_TYPE_E_RX (1)
+#define NIX_XQE_TYPE_E_RX_IPSECD (4)
+#define NIX_XQE_TYPE_E_RX_IPSECH (3)
+#define NIX_XQE_TYPE_E_RX_IPSECS (2)
+#define NIX_XQE_TYPE_E_SEND (8)
+
+/**
+ * Enumeration nix_xqesz_e
+ *
+ * NIX WQE/CQE Size Enumeration Enumerates the values of
+ * NIX_AF_LF()_CFG[XQE_SIZE].
+ */
+#define NIX_XQESZ_E_W16 (1)
+#define NIX_XQESZ_E_W64 (0)
+
+/**
+ * Structure nix_aq_inst_s
+ *
+ * NIX Admin Queue Instruction Structure This structure specifies the AQ
+ * instruction. Instructions and associated software structures are
+ * stored in memory as little-endian unless NIX_AF_CFG[AF_BE] is set.
+ * Hardware reads of NIX_AQ_INST_S do not allocate into LLC.  Hardware
+ * reads and writes of the context structure selected by [CTYPE], [LF]
+ * and [CINDEX] use the NDC and LLC caching style configured for that
+ * context. For example: * When [CTYPE] = NIX_AQ_CTYPE_E::RQ: use
+ * NIX_AF_LF()_RSS_CFG[CACHING] and NIX_AF_LF()_RSS_CFG[WAY_MASK]. * When
+ * [CTYPE] = NIX_AQ_CTYPE_E::MCE: use NIX_AF_RX_MCAST_CFG[CACHING] and
+ * NIX_AF_RX_MCAST_CFG[WAY_MASK].
+ */
+union nix_aq_inst_s {
+	u64 u[2];
+	struct nix_aq_inst_s_s {
+		u64 op                               : 4;
+		u64 ctype                            : 4;
+		u64 lf                               : 7;
+		u64 reserved_15_23                   : 9;
+		u64 cindex                           : 20;
+		u64 reserved_44_62                   : 19;
+		u64 doneint                          : 1;
+		u64 res_addr                         : 64;
+	} s;
+	/* struct nix_aq_inst_s_s cn; */
+};
+
+/**
+ * Structure nix_aq_res_s
+ *
+ * NIX Admin Queue Result Structure NIX writes this structure after it
+ * completes the NIX_AQ_INST_S instruction. The result structure is
+ * exactly 16 bytes, and each instruction completion produces exactly one
+ * result structure.  Results and associated software structures are
+ * stored in memory as little-endian unless NIX_AF_CFG[AF_BE] is set.
+ * When [OP] = NIX_AQ_INSTOP_E::INIT, WRITE or READ, this structure is
+ * immediately followed by context read or write data. See
+ * NIX_AQ_INSTOP_E.  Hardware writes of NIX_AQ_RES_S and context data
+ * always allocate into LLC. Hardware reads of context data do not
+ * allocate into LLC.
+ */
+union nix_aq_res_s {
+	u64 u[2];
+	struct nix_aq_res_s_s {
+		u64 op                               : 4;
+		u64 ctype                            : 4;
+		u64 compcode                         : 8;
+		u64 doneint                          : 1;
+		u64 reserved_17_63                   : 47;
+		u64 reserved_64_127                  : 64;
+	} s;
+	/* struct nix_aq_res_s_s cn; */
+};
+
+/**
+ * Structure nix_cint_hw_s
+ *
+ * NIX Completion Interrupt Context Hardware Structure This structure
+ * contains context state maintained by hardware for each completion
+ * interrupt (CINT) in NDC/LLC/DRAM. Software accesses this structure
+ * with the NIX_LF_CINT()* registers. Hardware maintains a table of
+ * NIX_AF_CONST2[CINTS] contiguous NIX_CINT_HW_S structures per LF
+ * starting at AF IOVA NIX_AF_LF()_CINTS_BASE. Always stored in byte
+ * invariant little-endian format (LE8).
+ */
+union nix_cint_hw_s {
+	u64 u[2];
+	struct nix_cint_hw_s_s {
+		u64 ecount                           : 32;
+		u64 qcount                           : 16;
+		u64 intr                             : 1;
+		u64 ena                              : 1;
+		u64 timer_idx                        : 8;
+		u64 reserved_58_63                   : 6;
+		u64 ecount_wait                      : 32;
+		u64 qcount_wait                      : 16;
+		u64 time_wait                        : 8;
+		u64 reserved_120_127                 : 8;
+	} s;
+	/* struct nix_cint_hw_s_s cn; */
+};
+
+/**
+ * Structure nix_cq_ctx_s
+ *
+ * NIX Completion Queue Context Structure This structure contains context
+ * state maintained by hardware for each CQ in NDC/LLC/DRAM. Software
+ * uses the same structure format to read and write an CQ context with
+ * the NIX admin queue.
+ */
+union nix_cq_ctx_s {
+	u64 u[4];
+	struct nix_cq_ctx_s_s {
+		u64 base                             : 64;
+		u64 reserved_64_67                   : 4;
+		u64 bp_ena                           : 1;
+		u64 reserved_69_71                   : 3;
+		u64 bpid                             : 9;
+		u64 reserved_81_83                   : 3;
+		u64 qint_idx                         : 7;
+		u64 cq_err                           : 1;
+		u64 cint_idx                         : 7;
+		u64 avg_con                          : 9;
+		u64 wrptr                            : 20;
+		u64 tail                             : 20;
+		u64 head                             : 20;
+		u64 avg_level                        : 8;
+		u64 update_time                      : 16;
+		u64 bp                               : 8;
+		u64 drop                             : 8;
+		u64 drop_ena                         : 1;
+		u64 ena                              : 1;
+		u64 reserved_210_211                 : 2;
+		u64 substream                        : 20;
+		u64 caching                          : 1;
+		u64 reserved_233_235                 : 3;
+		u64 qsize                            : 4;
+		u64 cq_err_int                       : 8;
+		u64 cq_err_int_ena                   : 8;
+	} s;
+	/* struct nix_cq_ctx_s_s cn; */
+};
+
+/**
+ * Structure nix_cqe_hdr_s
+ *
+ * NIX Completion Queue Entry Header Structure This 64-bit structure
+ * defines the first word of every CQE. It is immediately followed by
+ * NIX_RX_PARSE_S in a receive CQE, and by NIX_SEND_COMP_S in a send
+ * completion CQE. Stored in memory as little-endian unless
+ * NIX_AF_LF()_CFG[BE] is set.
+ */
+union nix_cqe_hdr_s {
+	u64 u;
+	struct nix_cqe_hdr_s_s {
+		u64 tag                              : 32;
+		u64 q                                : 20;
+		u64 reserved_52_57                   : 6;
+		u64 node                             : 2;
+		u64 cqe_type                         : 4;
+	} s;
+	/* struct nix_cqe_hdr_s_s cn; */
+};
+
+/**
+ * Structure nix_inst_hdr_s
+ *
+ * NIX Instruction Header Structure This structure defines the
+ * instruction header that precedes the packet header supplied to NPC for
+ * packets to be transmitted by NIX.
+ */
+union nix_inst_hdr_s {
+	u64 u;
+	struct nix_inst_hdr_s_s {
+		u64 pf_func                          : 16;
+		u64 sq                               : 20;
+		u64 reserved_36_63                   : 28;
+	} s;
+	/* struct nix_inst_hdr_s_s cn; */
+};
+
+/**
+ * Structure nix_iova_s
+ *
+ * NIX I/O Virtual Address Structure
+ */
+union nix_iova_s {
+	u64 u;
+	struct nix_iova_s_s {
+		u64 addr                             : 64;
+	} s;
+	/* struct nix_iova_s_s cn; */
+};
+
+/**
+ * Structure nix_ipsec_dyno_s
+ *
+ * INTERNAL: NIX IPSEC Dynamic Ordering Counter Structure  Internal: Not
+ * used; no IPSEC fast-path.
+ */
+union nix_ipsec_dyno_s {
+	u32 u;
+	struct nix_ipsec_dyno_s_s {
+		u32 count                            : 32;
+	} s;
+	/* struct nix_ipsec_dyno_s_s cn; */
+};
+
+/**
+ * Structure nix_mem_result_s
+ *
+ * NIX Memory Value Structure When
+ * NIX_SEND_MEM_S[ALG]=NIX_SENDMEMALG_E::SETRSLT, the value written to
+ * memory is formed with this structure.
+ */
+union nix_mem_result_s {
+	u64 u;
+	struct nix_mem_result_s_s {
+		u64 v                                : 1;
+		u64 color                            : 2;
+		u64 reserved_3_63                    : 61;
+	} s;
+	/* struct nix_mem_result_s_s cn; */
+};
+
+/**
+ * Structure nix_op_q_wdata_s
+ *
+ * NIX Statistics Operation Write Data Structure This structure specifies
+ * the write data format of an atomic 64-bit load-and-add of some
+ * NIX_LF_RQ_OP_*, NIX_LF_SQ_OP* and NIX_LF_CQ_OP* registers.
+ */
+union nix_op_q_wdata_s {
+	u64 u;
+	struct nix_op_q_wdata_s_s {
+		u64 reserved_0_31                    : 32;
+		u64 q                                : 20;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct nix_op_q_wdata_s_s cn; */
+};
+
+/**
+ * Structure nix_qint_hw_s
+ *
+ * NIX Queue Interrupt Context Hardware Structure This structure contains
+ * context state maintained by hardware for each queue interrupt (QINT)
+ * in NDC/LLC/DRAM. Software accesses this structure with the
+ * NIX_LF_QINT()* registers. Hardware maintains a table of
+ * NIX_AF_CONST2[QINTS] contiguous NIX_QINT_HW_S structures per LF
+ * starting at IOVA NIX_AF_LF()_QINTS_BASE. Always stored in byte
+ * invariant little-endian format (LE8).
+ */
+union nix_qint_hw_s {
+	u32 u;
+	struct nix_qint_hw_s_s {
+		u32 count                            : 22;
+		u32 reserved_22_30                   : 9;
+		u32 ena                              : 1;
+	} s;
+	/* struct nix_qint_hw_s_s cn; */
+};
+
+/**
+ * Structure nix_rq_ctx_hw_s
+ *
+ * NIX Receive Queue Context Structure This structure contains context
+ * state maintained by hardware for each RQ in NDC/LLC/DRAM. Software
+ * uses the equivalent NIX_RQ_CTX_S structure format to read and write an
+ * RQ context with the NIX admin queue. Always stored in byte invariant
+ * little-endian format (LE8).
+ */
+union nix_rq_ctx_hw_s {
+	u64 u[16];
+	struct nix_rq_ctx_hw_s_s {
+		u64 ena                              : 1;
+		u64 sso_ena                          : 1;
+		u64 ipsech_ena                       : 1;
+		u64 ena_wqwd                         : 1;
+		u64 cq                               : 20;
+		u64 substream                        : 20;
+		u64 wqe_aura                         : 20;
+		u64 spb_aura                         : 20;
+		u64 lpb_aura                         : 20;
+		u64 sso_grp                          : 10;
+		u64 sso_tt                           : 2;
+		u64 pb_caching                       : 2;
+		u64 wqe_caching                      : 1;
+		u64 xqe_drop_ena                     : 1;
+		u64 spb_drop_ena                     : 1;
+		u64 lpb_drop_ena                     : 1;
+		u64 wqe_skip                         : 2;
+		u64 reserved_124_127                 : 4;
+		u64 reserved_128_139                 : 12;
+		u64 spb_sizem1                       : 6;
+		u64 reserved_146_150                 : 5;
+		u64 spb_ena                          : 1;
+		u64 lpb_sizem1                       : 12;
+		u64 first_skip                       : 7;
+		u64 reserved_171                     : 1;
+		u64 later_skip                       : 6;
+		u64 xqe_imm_size                     : 6;
+		u64 reserved_184_189                 : 6;
+		u64 xqe_imm_copy                     : 1;
+		u64 xqe_hdr_split                    : 1;
+		u64 xqe_drop                         : 8;
+		u64 xqe_pass                         : 8;
+		u64 wqe_pool_drop                    : 8;
+		u64 wqe_pool_pass                    : 8;
+		u64 spb_aura_drop                    : 8;
+		u64 spb_aura_pass                    : 8;
+		u64 spb_pool_drop                    : 8;
+		u64 spb_pool_pass                    : 8;
+		u64 lpb_aura_drop                    : 8;
+		u64 lpb_aura_pass                    : 8;
+		u64 lpb_pool_drop                    : 8;
+		u64 lpb_pool_pass                    : 8;
+		u64 reserved_288_319                 : 32;
+		u64 ltag                             : 24;
+		u64 good_utag                        : 8;
+		u64 bad_utag                         : 8;
+		u64 flow_tagw                        : 6;
+		u64 reserved_366_383                 : 18;
+		u64 octs                             : 48;
+		u64 reserved_432_447                 : 16;
+		u64 pkts                             : 48;
+		u64 reserved_496_511                 : 16;
+		u64 drop_octs                        : 48;
+		u64 reserved_560_575                 : 16;
+		u64 drop_pkts                        : 48;
+		u64 reserved_624_639                 : 16;
+		u64 re_pkts                          : 48;
+		u64 reserved_688_702                 : 15;
+		u64 ena_copy                         : 1;
+		u64 reserved_704_739                 : 36;
+		u64 rq_int                           : 8;
+		u64 rq_int_ena                       : 8;
+		u64 qint_idx                         : 7;
+		u64 reserved_763_767                 : 5;
+		u64 reserved_768_831                 : 64;
+		u64 reserved_832_895                 : 64;
+		u64 reserved_896_959                 : 64;
+		u64 reserved_960_1023                : 64;
+	} s;
+	/* struct nix_rq_ctx_hw_s_s cn; */
+};
+
+/**
+ * Structure nix_rq_ctx_s
+ *
+ * NIX Receive Queue Context Structure This structure specifies the
+ * format used by software to read and write an RQ context with the NIX
+ * admin queue.
+ */
+union nix_rq_ctx_s {
+	u64 u[16];
+	struct nix_rq_ctx_s_s {
+		u64 ena                              : 1;
+		u64 sso_ena                          : 1;
+		u64 ipsech_ena                       : 1;
+		u64 ena_wqwd                         : 1;
+		u64 cq                               : 20;
+		u64 substream                        : 20;
+		u64 wqe_aura                         : 20;
+		u64 spb_aura                         : 20;
+		u64 lpb_aura                         : 20;
+		u64 sso_grp                          : 10;
+		u64 sso_tt                           : 2;
+		u64 pb_caching                       : 2;
+		u64 wqe_caching                      : 1;
+		u64 xqe_drop_ena                     : 1;
+		u64 spb_drop_ena                     : 1;
+		u64 lpb_drop_ena                     : 1;
+		u64 reserved_122_127                 : 6;
+		u64 reserved_128_139                 : 12;
+		u64 spb_sizem1                       : 6;
+		u64 wqe_skip                         : 2;
+		u64 reserved_148_150                 : 3;
+		u64 spb_ena                          : 1;
+		u64 lpb_sizem1                       : 12;
+		u64 first_skip                       : 7;
+		u64 reserved_171                     : 1;
+		u64 later_skip                       : 6;
+		u64 xqe_imm_size                     : 6;
+		u64 reserved_184_189                 : 6;
+		u64 xqe_imm_copy                     : 1;
+		u64 xqe_hdr_split                    : 1;
+		u64 xqe_drop                         : 8;
+		u64 xqe_pass                         : 8;
+		u64 wqe_pool_drop                    : 8;
+		u64 wqe_pool_pass                    : 8;
+		u64 spb_aura_drop                    : 8;
+		u64 spb_aura_pass                    : 8;
+		u64 spb_pool_drop                    : 8;
+		u64 spb_pool_pass                    : 8;
+		u64 lpb_aura_drop                    : 8;
+		u64 lpb_aura_pass                    : 8;
+		u64 lpb_pool_drop                    : 8;
+		u64 lpb_pool_pass                    : 8;
+		u64 reserved_288_291                 : 4;
+		u64 rq_int                           : 8;
+		u64 rq_int_ena                       : 8;
+		u64 qint_idx                         : 7;
+		u64 reserved_315_319                 : 5;
+		u64 ltag                             : 24;
+		u64 good_utag                        : 8;
+		u64 bad_utag                         : 8;
+		u64 flow_tagw                        : 6;
+		u64 reserved_366_383                 : 18;
+		u64 octs                             : 48;
+		u64 reserved_432_447                 : 16;
+		u64 pkts                             : 48;
+		u64 reserved_496_511                 : 16;
+		u64 drop_octs                        : 48;
+		u64 reserved_560_575                 : 16;
+		u64 drop_pkts                        : 48;
+		u64 reserved_624_639                 : 16;
+		u64 re_pkts                          : 48;
+		u64 reserved_688_703                 : 16;
+		u64 reserved_704_767                 : 64;
+		u64 reserved_768_831                 : 64;
+		u64 reserved_832_895                 : 64;
+		u64 reserved_896_959                 : 64;
+		u64 reserved_960_1023                : 64;
+	} s;
+	/* struct nix_rq_ctx_s_s cn; */
+};
+
+/**
+ * Structure nix_rsse_s
+ *
+ * NIX Receive Side Scaling Entry Structure This structure specifies the
+ * format of each hardware entry in the NIX RSS tables in NDC/LLC/DRAM.
+ * See NIX_AF_LF()_RSS_BASE and NIX_AF_LF()_RSS_GRP(). Software uses the
+ * same structure format to read and write an RSS table entry with the
+ * NIX admin queue.
+ */
+union nix_rsse_s {
+	u32 u;
+	struct nix_rsse_s_s {
+		u32 rq                               : 20;
+		u32 reserved_20_31                   : 12;
+	} s;
+	/* struct nix_rsse_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_action_s
+ *
+ * NIX Receive Action Structure This structure defines the format of
+ * NPC_RESULT_S[ACTION] for a receive packet.
+ */
+union nix_rx_action_s {
+	u64 u;
+	struct nix_rx_action_s_s {
+		u64 op                               : 4;
+		u64 pf_func                          : 16;
+		u64 index                            : 20;
+		u64 match_id                         : 16;
+		u64 flow_key_alg                     : 5;
+		u64 reserved_61_63                   : 3;
+	} s;
+	/* struct nix_rx_action_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_imm_s
+ *
+ * NIX Receive Immediate Subdescriptor Structure The receive immediate
+ * subdescriptor indicates that bytes immediately following this
+ * NIX_RX_IMM_S (after skipping [APAD] bytes) were saved from the
+ * received packet. The next subdescriptor following this NIX_RX_IMM_S
+ * (when one exists) will follow the immediate bytes, after rounding up
+ * the address to a multiple of 16 bytes.
+ */
+union nix_rx_imm_s {
+	u64 u;
+	struct nix_rx_imm_s_s {
+		u64 size                             : 16;
+		u64 apad                             : 3;
+		u64 reserved_19_59                   : 41;
+		u64 subdc                            : 4;
+	} s;
+	/* struct nix_rx_imm_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_mce_s
+ *
+ * NIX Receive Multicast/Mirror Entry Structure This structure specifies
+ * the format of entries in the NIX receive multicast/mirror table
+ * maintained by hardware in NDC/LLC/DRAM. See NIX_AF_RX_MCAST_BASE and
+ * NIX_AF_RX_MCAST_CFG. Note the table may contain both multicast and
+ * mirror replication lists. Software uses the same structure format to
+ * read and write a multicast/mirror table entry with the NIX admin
+ * queue.
+ */
+union nix_rx_mce_s {
+	u64 u;
+	struct nix_rx_mce_s_s {
+		u64 op                               : 2;
+		u64 reserved_2                       : 1;
+		u64 eol                              : 1;
+		u64 index                            : 20;
+		u64 reserved_24_31                   : 8;
+		u64 pf_func                          : 16;
+		u64 next                             : 16;
+	} s;
+	/* struct nix_rx_mce_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_parse_s
+ *
+ * NIX Receive Parse Structure This structure contains the receive packet
+ * parse result. It immediately follows NIX_CQE_HDR_S in a receive CQE,
+ * or NIX_WQE_HDR_S in a receive WQE. Stored in memory as little-endian
+ * unless NIX_AF_LF()_CFG[BE] is set.  Header layers are always 2-byte
+ * aligned, so all header pointers in this structure ([EOH_PTR], [LAPTR]
+ * through [LHPTR], [VTAG*_PTR]) are even.
+ */
+union nix_rx_parse_s {
+	u64 u[7];
+	struct nix_rx_parse_s_s {
+		u64 chan                             : 12;
+		u64 desc_sizem1                      : 5;
+		u64 imm_copy                         : 1;
+		u64 express                          : 1;
+		u64 wqwd                             : 1;
+		u64 errlev                           : 4;
+		u64 errcode                          : 8;
+		u64 latype                           : 4;
+		u64 lbtype                           : 4;
+		u64 lctype                           : 4;
+		u64 ldtype                           : 4;
+		u64 letype                           : 4;
+		u64 lftype                           : 4;
+		u64 lgtype                           : 4;
+		u64 lhtype                           : 4;
+		u64 pkt_lenm1                        : 16;
+		u64 l2m                              : 1;
+		u64 l2b                              : 1;
+		u64 l3m                              : 1;
+		u64 l3b                              : 1;
+		u64 vtag0_valid                      : 1;
+		u64 vtag0_gone                       : 1;
+		u64 vtag1_valid                      : 1;
+		u64 vtag1_gone                       : 1;
+		u64 pkind                            : 6;
+		u64 reserved_94_95                   : 2;
+		u64 vtag0_tci                        : 16;
+		u64 vtag1_tci                        : 16;
+		u64 laflags                          : 8;
+		u64 lbflags                          : 8;
+		u64 lcflags                          : 8;
+		u64 ldflags                          : 8;
+		u64 leflags                          : 8;
+		u64 lfflags                          : 8;
+		u64 lgflags                          : 8;
+		u64 lhflags                          : 8;
+		u64 eoh_ptr                          : 8;
+		u64 wqe_aura                         : 20;
+		u64 pb_aura                          : 20;
+		u64 match_id                         : 16;
+		u64 laptr                            : 8;
+		u64 lbptr                            : 8;
+		u64 lcptr                            : 8;
+		u64 ldptr                            : 8;
+		u64 leptr                            : 8;
+		u64 lfptr                            : 8;
+		u64 lgptr                            : 8;
+		u64 lhptr                            : 8;
+		u64 vtag0_ptr                        : 8;
+		u64 vtag1_ptr                        : 8;
+		u64 flow_key_alg                     : 5;
+		u64 reserved_341_383                 : 43;
+		u64 reserved_384_447                 : 64;
+	} s;
+	/* struct nix_rx_parse_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_sg_s
+ *
+ * NIX Receive Scatter/Gather Subdescriptor Structure The receive
+ * scatter/gather subdescriptor specifies one to three segments of packet
+ * data bytes. There may be multiple NIX_RX_SG_Ss in each NIX receive
+ * descriptor.  NIX_RX_SG_S is immediately followed by one NIX_IOVA_S
+ * word when [SEGS] = 1, three NIX_IOVA_S words when [SEGS] \>= 2. Each
+ * NIX_IOVA_S word specifies the LF IOVA of first packet data byte in the
+ * corresponding segment; first NIX_IOVA_S word for segment 1, second
+ * word for segment 2, third word for segment 3. Note the third word is
+ * present when [SEGS] \>= 2 but only valid when [SEGS] = 3.
+ */
+union nix_rx_sg_s {
+	u64 u;
+	struct nix_rx_sg_s_s {
+		u64 seg1_size                        : 16;
+		u64 seg2_size                        : 16;
+		u64 seg3_size                        : 16;
+		u64 segs                             : 2;
+		u64 reserved_50_59                   : 10;
+		u64 subdc                            : 4;
+	} s;
+	/* struct nix_rx_sg_s_s cn; */
+};
+
+/**
+ * Structure nix_rx_vtag_action_s
+ *
+ * NIX Receive Vtag Action Structure This structure defines the format of
+ * NPC_RESULT_S[VTAG_ACTION] for a receive packet. It specifies up to two
+ * Vtags (e.g. C-VLAN/S-VLAN tags, 802.1BR E-TAG) for optional capture
+ * and/or stripping.
+ */
+union nix_rx_vtag_action_s {
+	u64 u;
+	struct nix_rx_vtag_action_s_s {
+		u64 vtag0_relptr                     : 8;
+		u64 vtag0_lid                        : 3;
+		u64 reserved_11                      : 1;
+		u64 vtag0_type                       : 3;
+		u64 vtag0_valid                      : 1;
+		u64 reserved_16_31                   : 16;
+		u64 vtag1_relptr                     : 8;
+		u64 vtag1_lid                        : 3;
+		u64 reserved_43                      : 1;
+		u64 vtag1_type                       : 3;
+		u64 vtag1_valid                      : 1;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nix_rx_vtag_action_s_s cn; */
+};
+
+/**
+ * Structure nix_send_comp_s
+ *
+ * NIX Send Completion Structure This structure immediately follows
+ * NIX_CQE_HDR_S in a send completion CQE.
+ */
+union nix_send_comp_s {
+	u64 u;
+	struct nix_send_comp_s_s {
+		u64 status                           : 8;
+		u64 sqe_id                           : 16;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nix_send_comp_s_s cn; */
+};
+
+/**
+ * Structure nix_send_crc_s
+ *
+ * NIX Send CRC Subdescriptor Structure The send CRC subdescriptor
+ * specifies a CRC calculation be performed during transmission. Ignored
+ * when present in a send descriptor with NIX_SEND_EXT_S[LSO] set. There
+ * may be up to two NIX_SEND_CRC_Ss per send descriptor.  NIX_SEND_CRC_S
+ * constraints: * When present, NIX_SEND_CRC_S subdescriptors must
+ * precede all NIX_SEND_SG_S, NIX_SEND_IMM_S and NIX_SEND_MEM_S
+ * subdescriptors in the send descriptor. * NIX_SEND_CRC_S subdescriptors
+ * must follow the same order as their checksum and insert regions in the
+ * packet, i.e. the checksum and insert regions of a NIX_SEND_CRC_S must
+ * come after the checksum and insert regions of a preceding
+ * NIX_SEND_CRC_S. There must be no overlap between any NIX_SEND_CRC_S
+ * checksum and insert regions. * If either
+ * NIX_SEND_HDR_S[OL4TYPE,IL4TYPE] = NIX_SENDL4TYPE_E::SCTP_CKSUM, the
+ * SCTP checksum region and NIX_SEND_CRC_S insert region must not
+ * overlap, and likewise the NIX_SEND_CRC_S checksum region and SCTP
+ * insert region must not overlap. * If either
+ * NIX_SEND_HDR_S[OL3TYPE,IL3TYPE] = NIX_SENDL3TYPE_E::IP4_CKSUM, the
+ * IPv4 header checksum region and NIX_SEND_CRC_S insert region must not
+ * overlap. * Any checksums inserted by
+ * NIX_SEND_HDR_S[OL3TYPE,OL4TYPE,IL3TYPE,IL4TYPE] must be outside of the
+ * NIX_SEND_CRC_S checksum and insert regions.  Hardware adjusts [START],
+ * [SIZE] and [INSERT] as needed to account for any VLAN inserted by
+ * NIX_SEND_EXT_S[VLAN*] or Vtag inserted by NIX_TX_VTAG_ACTION_S.
+ */
+union nix_send_crc_s {
+	u64 u[2];
+	struct nix_send_crc_s_s {
+		u64 size                             : 16;
+		u64 start                            : 16;
+		u64 insert                           : 16;
+		u64 reserved_48_57                   : 10;
+		u64 alg                              : 2;
+		u64 subdc                            : 4;
+		u64 iv                               : 32;
+		u64 reserved_96_127                  : 32;
+	} s;
+	/* struct nix_send_crc_s_s cn; */
+};
+
+/**
+ * Structure nix_send_ext_s
+ *
+ * NIX Send Extended Header Subdescriptor Structure The send extended
+ * header specifies LSO, VLAN insertion, timestamp and/or scheduling
+ * services on the packet. If present, it must immediately follow
+ * NIX_SEND_HDR_S. All fields are assumed to be zero when this
+ * subdescriptor is not present.
+ */
+union nix_send_ext_s {
+	u64 u[2];
+	struct nix_send_ext_s_s {
+		u64 lso_mps                          : 14;
+		u64 lso                              : 1;
+		u64 tstmp                            : 1;
+		u64 lso_sb                           : 8;
+		u64 lso_format                       : 5;
+		u64 reserved_29_31                   : 3;
+		u64 shp_chg                          : 9;
+		u64 shp_dis                          : 1;
+		u64 shp_ra                           : 2;
+		u64 markptr                          : 8;
+		u64 markform                         : 7;
+		u64 mark_en                          : 1;
+		u64 subdc                            : 4;
+		u64 vlan0_ins_ptr                    : 8;
+		u64 vlan0_ins_tci                    : 16;
+		u64 vlan1_ins_ptr                    : 8;
+		u64 vlan1_ins_tci                    : 16;
+		u64 vlan0_ins_ena                    : 1;
+		u64 vlan1_ins_ena                    : 1;
+		u64 reserved_114_127                 : 14;
+	} s;
+	/* struct nix_send_ext_s_s cn; */
+};
+
+/**
+ * Structure nix_send_hdr_s
+ *
+ * NIX Send Header Subdescriptor Structure The send header is the first
+ * subdescriptor of every send descriptor.
+ */
+union nix_send_hdr_s {
+	u64 u[2];
+	struct nix_send_hdr_s_s {
+		u64 total                            : 18;
+		u64 reserved_18                      : 1;
+		u64 df                               : 1;
+		u64 aura                             : 20;
+		u64 sizem1                           : 3;
+		u64 pnc                              : 1;
+		u64 sq                               : 20;
+		u64 ol3ptr                           : 8;
+		u64 ol4ptr                           : 8;
+		u64 il3ptr                           : 8;
+		u64 il4ptr                           : 8;
+		u64 ol3type                          : 4;
+		u64 ol4type                          : 4;
+		u64 il3type                          : 4;
+		u64 il4type                          : 4;
+		u64 sqe_id                           : 16;
+	} s;
+	/* struct nix_send_hdr_s_s cn; */
+};
+
+/**
+ * Structure nix_send_imm_s
+ *
+ * NIX Send Immediate Subdescriptor Structure The send immediate
+ * subdescriptor requests that bytes immediately following this
+ * NIX_SEND_IMM_S (after skipping [APAD] bytes) are to be included in the
+ * packet data. The next subdescriptor following this NIX_SEND_IMM_S
+ * (when one exists) will follow the immediate bytes, after rounding up
+ * the address to a multiple of 16 bytes.  There may be multiple
+ * NIX_SEND_IMM_S in one NIX send descriptor. A NIX_SEND_IMM_S is ignored
+ * in a NIX send descriptor if the sum of all prior
+ * NIX_SEND_SG_S[SEG*_SIZE]s and NIX_SEND_IMM_S[SIZE]s meets or exceeds
+ * NIX_SEND_HDR_S[TOTAL].  When NIX_SEND_EXT_S[LSO] is set in the
+ * descriptor, all NIX_SEND_IMM_S bytes must be included in the first
+ * NIX_SEND_EXT_S[LSO_SB] bytes of the source packet.
+ */
+union nix_send_imm_s {
+	u64 u;
+	struct nix_send_imm_s_s {
+		u64 size                             : 16;
+		u64 apad                             : 3;
+		u64 reserved_19_59                   : 41;
+		u64 subdc                            : 4;
+	} s;
+	/* struct nix_send_imm_s_s cn; */
+};
+
+/**
+ * Structure nix_send_jump_s
+ *
+ * NIX Send Jump Subdescriptor Structure The send jump subdescriptor
+ * selects a new address for fetching the remaining subdescriptors of a
+ * send descriptor. This allows software to create a send descriptor
+ * longer than SQE size selected by NIX_SQ_CTX_S[MAX_SQE_SIZE].  There
+ * can be only one NIX_SEND_JUMP_S subdescriptor in a send descriptor. If
+ * present, it must immediately follow NIX_SEND_HDR_S if NIX_SEND_EXT_S
+ * is not present, else it must immediately follow NIX_SEND_EXT_S. In
+ * either case, it must terminate the SQE enqueued by software.
+ */
+union nix_send_jump_s {
+	u64 u[2];
+	struct nix_send_jump_s_s {
+		u64 sizem1                           : 7;
+		u64 reserved_7_13                    : 7;
+		u64 ld_type                          : 2;
+		u64 aura                             : 20;
+		u64 reserved_36_58                   : 23;
+		u64 f                                : 1;
+		u64 subdc                            : 4;
+		u64 addr                             : 64;
+	} s;
+	/* struct nix_send_jump_s_s cn; */
+};
+
+/**
+ * Structure nix_send_mem_s
+ *
+ * NIX Send Memory Subdescriptor Structure The send memory subdescriptor
+ * atomically sets, increments or decrements a memory location.
+ * NIX_SEND_MEM_S subdescriptors must follow all NIX_SEND_SG_S and
+ * NIX_SEND_IMM_S subdescriptors in the NIX send descriptor. NIX will not
+ * initiate the memory update for this subdescriptor until after it has
+ * completed all LLC/DRAM fetches that service all prior NIX_SEND_SG_S
+ * subdescriptors. The memory update is executed once, even if the packet
+ * is replicated due to NIX_TX_ACTION_S[OP] = NIX_TX_ACTIONOP_E::MCAST.
+ * Performance is best if a memory decrement by one is used rather than
+ * any other memory set/increment/decrement. (Less internal bus bandwidth
+ * is used with memory decrements by one.)  When NIX_SEND_EXT_S[LSO] is
+ * set in the descriptor, NIX executes the memory update only while
+ * processing the last LSO segment, after processing prior segments.
+ */
+union nix_send_mem_s {
+	u64 u[2];
+	struct nix_send_mem_s_s {
+		u64 offset                           : 16;
+		u64 reserved_16_52                   : 37;
+		u64 wmem                             : 1;
+		u64 dsz                              : 2;
+		u64 alg                              : 4;
+		u64 subdc                            : 4;
+		u64 addr                             : 64;
+	} s;
+	/* struct nix_send_mem_s_s cn; */
+};
+
+/**
+ * Structure nix_send_sg_s
+ *
+ * NIX Send Scatter/Gather Subdescriptor Structure The send
+ * scatter/gather subdescriptor requests one to three segments of packet
+ * data bytes to be transmitted. There may be multiple NIX_SEND_SG_Ss in
+ * each NIX send descriptor.  NIX_SEND_SG_S is immediately followed by
+ * one NIX_IOVA_S word when [SEGS] = 1, three NIX_IOVA_S words when
+ * [SEGS] \>= 2. Each NIX_IOVA_S word specifies the LF IOVA of first
+ * packet data byte in the corresponding segment; first NIX_IOVA_S word
+ * for segment 1, second word for segment 2, third word for segment 3.
+ * Note the third word is present when [SEGS] \>= 2 but only valid when
+ * [SEGS] = 3.  If the sum of all prior NIX_SEND_SG_S[SEG*_SIZE]s and
+ * NIX_SEND_IMM_S[SIZE]s meets or exceeds NIX_SEND_HDR_S[TOTAL], this
+ * subdescriptor will not contribute any packet data but may free buffers
+ * to NPA (see [I1]).
+ */
+union nix_send_sg_s {
+	u64 u;
+	struct nix_send_sg_s_s {
+		u64 seg1_size                        : 16;
+		u64 seg2_size                        : 16;
+		u64 seg3_size                        : 16;
+		u64 segs                             : 2;
+		u64 reserved_50_54                   : 5;
+		u64 i1                               : 1;
+		u64 i2                               : 1;
+		u64 i3                               : 1;
+		u64 ld_type                          : 2;
+		u64 subdc                            : 4;
+	} s;
+	/* struct nix_send_sg_s_s cn; */
+};
+
+/**
+ * Structure nix_send_work_s
+ *
+ * NIX Send Work Subdescriptor Structure This subdescriptor adds work to
+ * the SSO. At most one NIX_SEND_WORK_S subdescriptor can exist in the
+ * NIX send descriptor. If a NIX_SEND_WORK_S exists in the descriptor, it
+ * must be the last subdescriptor. NIX will not initiate the work add for
+ * this subdescriptor until after (1) it has completed all LLC/DRAM
+ * fetches that service all prior NIX_SEND_SG_S subdescriptors, (2) it
+ * has fetched all subdescriptors in the descriptor, and (3) all
+ * NIX_SEND_MEM_S[WMEM]=1 LLC/DRAM updates have completed.  Provided the
+ * path of descriptors from the SQ through NIX to an output FIFO is
+ * unmodified between the descriptors (as should normally be the case,
+ * but it is possible for software to change the path), NIX also (1) will
+ * submit the SSO add works from all descriptors in the SQ in order, and
+ * (2) will not submit an SSO work add until after all prior descriptors
+ * in the SQ have completed their NIX_SEND_SG_S processing, and (3) will
+ * not submit an SSO work add until after it has fetched all
+ * subdescriptors from prior descriptors in the SQ.  When
+ * NIX_SEND_EXT_S[LSO] is set in the descriptor, NIX executes the
+ * NIX_SEND_WORK_S work add only while processing the last LSO segment,
+ * after processing prior segments.  Hardware ignores NIX_SEND_WORK_S
+ * when NIX_SQ_CTX_S[SSO_ENA] is clear.
+ */
+union nix_send_work_s {
+	u64 u[2];
+	struct nix_send_work_s_s {
+		u64 tag                              : 32;
+		u64 tt                               : 2;
+		u64 grp                              : 10;
+		u64 reserved_44_59                   : 16;
+		u64 subdc                            : 4;
+		u64 addr                             : 64;
+	} s;
+	/* struct nix_send_work_s_s cn; */
+};
+
+/**
+ * Structure nix_sq_ctx_hw_s
+ *
+ * NIX SQ Context Hardware Structure This structure contains context
+ * state maintained by hardware for each SQ in NDC/LLC/DRAM. Software
+ * uses the equivalent NIX_SQ_CTX_S structure format to read and write an
+ * SQ context with the NIX admin queue. Always stored in byte invariant
+ * little-endian format (LE8).
+ */
+union nix_sq_ctx_hw_s {
+	u64 u[16];
+	struct nix_sq_ctx_hw_s_s {
+		u64 ena                              : 1;
+		u64 substream                        : 20;
+		u64 max_sqe_size                     : 2;
+		u64 sqe_way_mask                     : 16;
+		u64 sqb_aura                         : 20;
+		u64 gbl_rsvd1                        : 5;
+		u64 cq_id                            : 20;
+		u64 cq_ena                           : 1;
+		u64 qint_idx                         : 6;
+		u64 gbl_rsvd2                        : 1;
+		u64 sq_int                           : 8;
+		u64 sq_int_ena                       : 8;
+		u64 xoff                             : 1;
+		u64 sqe_stype                        : 2;
+		u64 gbl_rsvd                         : 17;
+		u64 head_sqb                         : 64;
+		u64 head_offset                      : 6;
+		u64 sqb_dequeue_count                : 16;
+		u64 default_chan                     : 12;
+		u64 sdp_mcast                        : 1;
+		u64 sso_ena                          : 1;
+		u64 dse_rsvd1                        : 28;
+		u64 sqb_enqueue_count                : 16;
+		u64 tail_offset                      : 6;
+		u64 lmt_dis                          : 1;
+		u64 smq_rr_quantum                   : 24;
+		u64 dnq_rsvd1                        : 17;
+		u64 tail_sqb                         : 64;
+		u64 next_sqb                         : 64;
+		u64 mnq_dis                          : 1;
+		u64 smq                              : 9;
+		u64 smq_pend                         : 1;
+		u64 smq_next_sq                      : 20;
+		u64 smq_next_sq_vld                  : 1;
+		u64 scm1_rsvd2                       : 32;
+		u64 smenq_sqb                        : 64;
+		u64 smenq_offset                     : 6;
+		u64 cq_limit                         : 8;
+		u64 smq_rr_count                     : 25;
+		u64 scm_lso_rem                      : 18;
+		u64 scm_dq_rsvd0                     : 7;
+		u64 smq_lso_segnum                   : 8;
+		u64 vfi_lso_total                    : 18;
+		u64 vfi_lso_sizem1                   : 3;
+		u64 vfi_lso_sb                       : 8;
+		u64 vfi_lso_mps                      : 14;
+		u64 vfi_lso_vlan0_ins_ena            : 1;
+		u64 vfi_lso_vlan1_ins_ena            : 1;
+		u64 vfi_lso_vld                      : 1;
+		u64 smenq_next_sqb_vld               : 1;
+		u64 scm_dq_rsvd1                     : 9;
+		u64 smenq_next_sqb                   : 64;
+		u64 seb_rsvd1                        : 64;
+		u64 drop_pkts                        : 48;
+		u64 drop_octs_lsw                    : 16;
+		u64 drop_octs_msw                    : 32;
+		u64 pkts_lsw                         : 32;
+		u64 pkts_msw                         : 16;
+		u64 octs                             : 48;
+	} s;
+	/* struct nix_sq_ctx_hw_s_s cn; */
+};
+
+/**
+ * Structure nix_sq_ctx_s
+ *
+ * NIX Send Queue Context Structure This structure specifies the format
+ * used by software with the NIX admin queue to read and write a send
+ * queue's NIX_SQ_CTX_HW_S structure maintained by hardware in
+ * NDC/LLC/DRAM.  The SQ statistics ([OCTS], [PKTS], [DROP_OCTS],
+ * [DROP_PKTS]) do not account for packet replication due to
+ * NIX_TX_ACTION_S[OP] = NIX_TX_ACTIONOP_E::MCAST.
+ */
+union nix_sq_ctx_s {
+	u64 u[16];
+	struct nix_sq_ctx_s_s {
+		u64 ena                              : 1;
+		u64 qint_idx                         : 6;
+		u64 substream                        : 20;
+		u64 sdp_mcast                        : 1;
+		u64 cq                               : 20;
+		u64 sqe_way_mask                     : 16;
+		u64 smq                              : 9;
+		u64 cq_ena                           : 1;
+		u64 xoff                             : 1;
+		u64 sso_ena                          : 1;
+		u64 smq_rr_quantum                   : 24;
+		u64 default_chan                     : 12;
+		u64 sqb_count                        : 16;
+		u64 smq_rr_count                     : 25;
+		u64 sqb_aura                         : 20;
+		u64 sq_int                           : 8;
+		u64 sq_int_ena                       : 8;
+		u64 sqe_stype                        : 2;
+		u64 reserved_191                     : 1;
+		u64 max_sqe_size                     : 2;
+		u64 cq_limit                         : 8;
+		u64 lmt_dis                          : 1;
+		u64 mnq_dis                          : 1;
+		u64 smq_next_sq                      : 20;
+		u64 smq_lso_segnum                   : 8;
+		u64 tail_offset                      : 6;
+		u64 smenq_offset                     : 6;
+		u64 head_offset                      : 6;
+		u64 smenq_next_sqb_vld               : 1;
+		u64 smq_pend                         : 1;
+		u64 smq_next_sq_vld                  : 1;
+		u64 reserved_253_255                 : 3;
+		u64 next_sqb                         : 64;
+		u64 tail_sqb                         : 64;
+		u64 smenq_sqb                        : 64;
+		u64 smenq_next_sqb                   : 64;
+		u64 head_sqb                         : 64;
+		u64 reserved_576_583                 : 8;
+		u64 vfi_lso_total                    : 18;
+		u64 vfi_lso_sizem1                   : 3;
+		u64 vfi_lso_sb                       : 8;
+		u64 vfi_lso_mps                      : 14;
+		u64 vfi_lso_vlan0_ins_ena            : 1;
+		u64 vfi_lso_vlan1_ins_ena            : 1;
+		u64 vfi_lso_vld                      : 1;
+		u64 reserved_630_639                 : 10;
+		u64 scm_lso_rem                      : 18;
+		u64 reserved_658_703                 : 46;
+		u64 octs                             : 48;
+		u64 reserved_752_767                 : 16;
+		u64 pkts                             : 48;
+		u64 reserved_816_831                 : 16;
+		u64 reserved_832_895                 : 64;
+		u64 drop_octs                        : 48;
+		u64 reserved_944_959                 : 16;
+		u64 drop_pkts                        : 48;
+		u64 reserved_1008_1023               : 16;
+	} s;
+	/* struct nix_sq_ctx_s_s cn; */
+};
+
+/**
+ * Structure nix_tx_action_s
+ *
+ * NIX Transmit Action Structure This structure defines the format of
+ * NPC_RESULT_S[ACTION] for a transmit packet.
+ */
+union nix_tx_action_s {
+	u64 u;
+	struct nix_tx_action_s_s {
+		u64 op                               : 4;
+		u64 reserved_4_11                    : 8;
+		u64 index                            : 20;
+		u64 match_id                         : 16;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nix_tx_action_s_s cn; */
+};
+
+/**
+ * Structure nix_tx_vtag_action_s
+ *
+ * NIX Transmit Vtag Action Structure This structure defines the format
+ * of NPC_RESULT_S[VTAG_ACTION] for a transmit packet. It specifies the
+ * optional insertion or replacement of up to two Vtags (e.g.
+ * C-VLAN/S-VLAN tags, 802.1BR E-TAG).  If two Vtags are specified: * The
+ * Vtag 0 byte offset from packet start (see [VTAG0_RELPTR]) must be less
+ * than or equal to the Vtag 1 byte offset. * Hardware executes the Vtag
+ * 0 action first, Vtag 1 action second. * If Vtag 0 is inserted,
+ * hardware adjusts the Vtag 1 byte offset accordingly. Thus, if the two
+ * offsets are equal in the structure, hardware inserts Vtag 1
+ * immediately after Vtag 0 in the packet.  A Vtag must not be inserted
+ * or replaced within an outer or inner L3/L4 header, but may be inserted
+ * or replaced within an outer L4 payload.
+ */
+union nix_tx_vtag_action_s {
+	u64 u;
+	struct nix_tx_vtag_action_s_s {
+		u64 vtag0_relptr                     : 8;
+		u64 vtag0_lid                        : 3;
+		u64 reserved_11                      : 1;
+		u64 vtag0_op                         : 2;
+		u64 reserved_14_15                   : 2;
+		u64 vtag0_def                        : 10;
+		u64 reserved_26_31                   : 6;
+		u64 vtag1_relptr                     : 8;
+		u64 vtag1_lid                        : 3;
+		u64 reserved_43                      : 1;
+		u64 vtag1_op                         : 2;
+		u64 reserved_46_47                   : 2;
+		u64 vtag1_def                        : 10;
+		u64 reserved_58_63                   : 6;
+	} s;
+	/* struct nix_tx_vtag_action_s_s cn; */
+};
+
+/**
+ * Structure nix_wqe_hdr_s
+ *
+ * NIX Work Queue Entry Header Structure This 64-bit structure defines
+ * the first word of every receive WQE generated by NIX. It is
+ * immediately followed by NIX_RX_PARSE_S. Stored in memory as little-
+ * endian unless NIX_AF_LF()_CFG[BE] is set.
+ */
+union nix_wqe_hdr_s {
+	u64 u;
+	struct nix_wqe_hdr_s_s {
+		u64 tag                              : 32;
+		u64 tt                               : 2;
+		u64 grp                              : 10;
+		u64 node                             : 2;
+		u64 q                                : 14;
+		u64 wqe_type                         : 4;
+	} s;
+	/* struct nix_wqe_hdr_s_s cn; */
+};
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_base
+ *
+ * NIX AF Admin Queue Base Address Register
+ */
+union nixx_af_aq_base {
+	u64 u;
+	struct nixx_af_aq_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 base_addr                        : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_aq_base_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_BASE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_BASE(void)
+{
+	return 0x410;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_cfg
+ *
+ * NIX AF Admin Queue Configuration Register
+ */
+union nixx_af_aq_cfg {
+	u64 u;
+	struct nixx_af_aq_cfg_s {
+		u64 qsize                            : 4;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct nixx_af_aq_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_CFG(void)
+{
+	return 0x400;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done
+ *
+ * NIX AF Admin Queue Done Count Register
+ */
+union nixx_af_aq_done {
+	u64 u;
+	struct nixx_af_aq_done_s {
+		u64 done                             : 20;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct nixx_af_aq_done_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE(void)
+{
+	return 0x450;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_ack
+ *
+ * NIX AF Admin Queue Done Count Ack Register This register is written by
+ * software to acknowledge interrupts.
+ */
+union nixx_af_aq_done_ack {
+	u64 u;
+	struct nixx_af_aq_done_ack_s {
+		u64 done_ack                         : 20;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct nixx_af_aq_done_ack_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_ACK(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_ACK(void)
+{
+	return 0x460;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_ena_w1c
+ *
+ * NIX AF Admin Queue Done Interrupt Enable Clear Register
+ */
+union nixx_af_aq_done_ena_w1c {
+	u64 u;
+	struct nixx_af_aq_done_ena_w1c_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_aq_done_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_ENA_W1C(void)
+{
+	return 0x498;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_ena_w1s
+ *
+ * NIX AF Admin Queue Done Interrupt Enable Set Register
+ */
+union nixx_af_aq_done_ena_w1s {
+	u64 u;
+	struct nixx_af_aq_done_ena_w1s_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_aq_done_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_ENA_W1S(void)
+{
+	return 0x490;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_int
+ *
+ * INTERNAL: NIX AF Admin Queue Done Interrupt Register
+ */
+union nixx_af_aq_done_int {
+	u64 u;
+	struct nixx_af_aq_done_int_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_aq_done_int_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_INT(void)
+{
+	return 0x480;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_int_w1s
+ *
+ * INTERNAL: NIX AF Admin Queue Done Interrupt Set Register
+ */
+union nixx_af_aq_done_int_w1s {
+	u64 u;
+	struct nixx_af_aq_done_int_w1s_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_aq_done_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_INT_W1S(void)
+{
+	return 0x488;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_timer
+ *
+ * NIX AF Admin Queue Done Interrupt Timer Register
+ */
+union nixx_af_aq_done_timer {
+	u64 u;
+	struct nixx_af_aq_done_timer_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_aq_done_timer_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_TIMER(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_TIMER(void)
+{
+	return 0x470;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_done_wait
+ *
+ * NIX AF Admin Queue Done Interrupt Coalescing Wait Register Specifies
+ * the queue interrupt coalescing settings.
+ */
+union nixx_af_aq_done_wait {
+	u64 u;
+	struct nixx_af_aq_done_wait_s {
+		u64 num_wait                         : 20;
+		u64 reserved_20_31                   : 12;
+		u64 time_wait                        : 16;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_aq_done_wait_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DONE_WAIT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DONE_WAIT(void)
+{
+	return 0x440;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_door
+ *
+ * NIX AF Admin Queue Doorbell Register Software writes to this register
+ * to enqueue entries to AQ.
+ */
+union nixx_af_aq_door {
+	u64 u;
+	struct nixx_af_aq_door_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_aq_door_s cn; */
+};
+
+static inline u64 NIXX_AF_AQ_DOOR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_DOOR(void)
+{
+	return 0x430;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_aq_status
+ *
+ * NIX AF Admin Queue Status Register
+ */
+union nixx_af_aq_status {
+	u64 u;
+	struct nixx_af_aq_status_s {
+		u64 reserved_0_3                     : 4;
+		u64 head_ptr                         : 20;
+		u64 reserved_24_35                   : 12;
+		u64 tail_ptr                         : 20;
+		u64 reserved_56_61                   : 6;
+		u64 aq_busy                          : 1;
+		u64 aq_err                           : 1;
+	} s;
+	struct nixx_af_aq_status_cn {
+		u64 reserved_0_3                     : 4;
+		u64 head_ptr                         : 20;
+		u64 reserved_24_31                   : 8;
+		u64 reserved_32_35                   : 4;
+		u64 tail_ptr                         : 20;
+		u64 reserved_56_61                   : 6;
+		u64 aq_busy                          : 1;
+		u64 aq_err                           : 1;
+	} cn;
+};
+
+static inline u64 NIXX_AF_AQ_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AQ_STATUS(void)
+{
+	return 0x420;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_avg_delay
+ *
+ * NIX AF Queue Average Delay Register
+ */
+union nixx_af_avg_delay {
+	u64 u;
+	struct nixx_af_avg_delay_s {
+		u64 avg_dly                          : 19;
+		u64 reserved_19_23                   : 5;
+		u64 avg_timer                        : 16;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct nixx_af_avg_delay_s cn; */
+};
+
+static inline u64 NIXX_AF_AVG_DELAY(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_AVG_DELAY(void)
+{
+	return 0xe0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_bar2_alias#
+ *
+ * NIX Admin Function  BAR2 Alias Registers These registers alias to the
+ * NIX BAR2 registers for the PF and function selected by
+ * NIX_AF_BAR2_SEL[PF_FUNC].  Internal: Not implemented. Placeholder for
+ * bug33464.
+ */
+union nixx_af_bar2_aliasx {
+	u64 u;
+	struct nixx_af_bar2_aliasx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct nixx_af_bar2_aliasx_s cn; */
+};
+
+static inline u64 NIXX_AF_BAR2_ALIASX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_BAR2_ALIASX(u64 a)
+{
+	return 0x9100000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_bar2_sel
+ *
+ * NIX Admin Function BAR2 Select Register This register configures BAR2
+ * accesses from the NIX_AF_BAR2_ALIAS() registers in BAR0. Internal: Not
+ * implemented. Placeholder for bug33464.
+ */
+union nixx_af_bar2_sel {
+	u64 u;
+	struct nixx_af_bar2_sel_s {
+		u64 alias_pf_func                    : 16;
+		u64 alias_ena                        : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct nixx_af_bar2_sel_s cn; */
+};
+
+static inline u64 NIXX_AF_BAR2_SEL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_BAR2_SEL(void)
+{
+	return 0x9000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_blk_rst
+ *
+ * NIX AF Block Reset Register
+ */
+union nixx_af_blk_rst {
+	u64 u;
+	struct nixx_af_blk_rst_s {
+		u64 rst                              : 1;
+		u64 reserved_1_62                    : 62;
+		u64 busy                             : 1;
+	} s;
+	/* struct nixx_af_blk_rst_s cn; */
+};
+
+static inline u64 NIXX_AF_BLK_RST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_BLK_RST(void)
+{
+	return 0xb0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cfg
+ *
+ * NIX AF General Configuration Register
+ */
+union nixx_af_cfg {
+	u64 u;
+	struct nixx_af_cfg_s {
+		u64 force_cond_clk_en                : 1;
+		u64 force_rx_gbl_clk_en              : 1;
+		u64 force_rx_strm_clk_en             : 1;
+		u64 force_cqm_clk_en                 : 1;
+		u64 force_seb_clk_en                 : 1;
+		u64 force_sqm_clk_en                 : 1;
+		u64 force_pse_clk_en                 : 1;
+		u64 reserved_7                       : 1;
+		u64 af_be                            : 1;
+		u64 calibrate_x2p                    : 1;
+		u64 force_intf_clk_en                : 1;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CFG(void)
+{
+	return 0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cint_delay
+ *
+ * NIX AF Completion Interrupt Delay Register
+ */
+union nixx_af_cint_delay {
+	u64 u;
+	struct nixx_af_cint_delay_s {
+		u64 cint_dly                         : 10;
+		u64 reserved_10_15                   : 6;
+		u64 cint_timer                       : 16;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct nixx_af_cint_delay_s cn; */
+};
+
+static inline u64 NIXX_AF_CINT_DELAY(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CINT_DELAY(void)
+{
+	return 0xf0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cint_timer#
+ *
+ * NIX AF Completion Interrupt Timer Registers
+ */
+union nixx_af_cint_timerx {
+	u64 u;
+	struct nixx_af_cint_timerx_s {
+		u64 expir_time                       : 16;
+		u64 cint                             : 7;
+		u64 reserved_23                      : 1;
+		u64 lf                               : 8;
+		u64 active                           : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct nixx_af_cint_timerx_s cn; */
+};
+
+static inline u64 NIXX_AF_CINT_TIMERX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CINT_TIMERX(u64 a)
+{
+	return 0x1a40 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_const
+ *
+ * NIX AF Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_const {
+	u64 u;
+	struct nixx_af_const_s {
+		u64 cgx_lmac_channels                : 8;
+		u64 cgx_lmacs                        : 4;
+		u64 num_cgx                          : 4;
+		u64 lbk_channels                     : 8;
+		u64 num_lbk                          : 4;
+		u64 num_sdp                          : 4;
+		u64 reserved_32_47                   : 16;
+		u64 links                            : 8;
+		u64 intfs                            : 4;
+		u64 reserved_60_63                   : 4;
+	} s;
+	/* struct nixx_af_const_s cn; */
+};
+
+static inline u64 NIXX_AF_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CONST(void)
+{
+	return 0x20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_const1
+ *
+ * NIX AF Constants 1 Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_const1 {
+	u64 u;
+	struct nixx_af_const1_s {
+		u64 sdp_channels                     : 12;
+		u64 rx_bpids                         : 12;
+		u64 lf_tx_stats                      : 8;
+		u64 lf_rx_stats                      : 8;
+		u64 lso_format_fields                : 8;
+		u64 lso_formats                      : 8;
+		u64 reserved_56_63                   : 8;
+	} s;
+	/* struct nixx_af_const1_s cn; */
+};
+
+static inline u64 NIXX_AF_CONST1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CONST1(void)
+{
+	return 0x28;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_const2
+ *
+ * NIX AF Constants 2 Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_const2 {
+	u64 u;
+	struct nixx_af_const2_s {
+		u64 lfs                              : 12;
+		u64 qints                            : 12;
+		u64 cints                            : 12;
+		u64 reserved_36_63                   : 28;
+	} s;
+	/* struct nixx_af_const2_s cn; */
+};
+
+static inline u64 NIXX_AF_CONST2(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CONST2(void)
+{
+	return 0x30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_const3
+ *
+ * NIX AF Constants 2 Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_const3 {
+	u64 u;
+	struct nixx_af_const3_s {
+		u64 sq_ctx_log2bytes                 : 4;
+		u64 rq_ctx_log2bytes                 : 4;
+		u64 cq_ctx_log2bytes                 : 4;
+		u64 rsse_log2bytes                   : 4;
+		u64 mce_log2bytes                    : 4;
+		u64 qint_log2bytes                   : 4;
+		u64 cint_log2bytes                   : 4;
+		u64 dyno_log2bytes                   : 4;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct nixx_af_const3_s cn; */
+};
+
+static inline u64 NIXX_AF_CONST3(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CONST3(void)
+{
+	return 0x38;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cq_const
+ *
+ * NIX AF CQ Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_cq_const {
+	u64 u;
+	struct nixx_af_cq_const_s {
+		u64 queues_per_lf                    : 24;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_cq_const_s cn; */
+};
+
+static inline u64 NIXX_AF_CQ_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CQ_CONST(void)
+{
+	return 0x48;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cqm_bp_test
+ *
+ * INTERNAL: NIX AF CQM Backpressure Test Registers
+ */
+union nixx_af_cqm_bp_test {
+	u64 u;
+	struct nixx_af_cqm_bp_test_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 24;
+		u64 enable                           : 12;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct nixx_af_cqm_bp_test_s cn; */
+};
+
+static inline u64 NIXX_AF_CQM_BP_TEST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CQM_BP_TEST(void)
+{
+	return 0x48c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_cqm_eco
+ *
+ * INTERNAL: AF CQM ECO Register
+ */
+union nixx_af_cqm_eco {
+	u64 u;
+	struct nixx_af_cqm_eco_s {
+		u64 eco_rw                           : 64;
+	} s;
+	/* struct nixx_af_cqm_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_CQM_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CQM_ECO(void)
+{
+	return 0x590;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_csi_eco
+ *
+ * INTERNAL: AF CSI ECO Register
+ */
+union nixx_af_csi_eco {
+	u64 u;
+	struct nixx_af_csi_eco_s {
+		u64 eco_rw                           : 64;
+	} s;
+	/* struct nixx_af_csi_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_CSI_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_CSI_ECO(void)
+{
+	return 0x580;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_err_int
+ *
+ * NIX Admin Function Error Interrupt Register
+ */
+union nixx_af_err_int {
+	u64 u;
+	struct nixx_af_err_int_s {
+		u64 rx_mcast_data_fault              : 1;
+		u64 rx_mirror_data_fault             : 1;
+		u64 rx_mcast_wqe_fault               : 1;
+		u64 rx_mirror_wqe_fault              : 1;
+		u64 rx_mce_fault                     : 1;
+		u64 rx_mce_list_err                  : 1;
+		u64 rx_unmapped_pf_func              : 1;
+		u64 reserved_7_11                    : 5;
+		u64 aq_door_err                      : 1;
+		u64 aq_res_fault                     : 1;
+		u64 aq_inst_fault                    : 1;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct nixx_af_err_int_s cn; */
+};
+
+static inline u64 NIXX_AF_ERR_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_ERR_INT(void)
+{
+	return 0x180;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_err_int_ena_w1c
+ *
+ * NIX Admin Function Error Interrupt Enable Clear Register This register
+ * clears interrupt enable bits.
+ */
+union nixx_af_err_int_ena_w1c {
+	u64 u;
+	struct nixx_af_err_int_ena_w1c_s {
+		u64 rx_mcast_data_fault              : 1;
+		u64 rx_mirror_data_fault             : 1;
+		u64 rx_mcast_wqe_fault               : 1;
+		u64 rx_mirror_wqe_fault              : 1;
+		u64 rx_mce_fault                     : 1;
+		u64 rx_mce_list_err                  : 1;
+		u64 rx_unmapped_pf_func              : 1;
+		u64 reserved_7_11                    : 5;
+		u64 aq_door_err                      : 1;
+		u64 aq_res_fault                     : 1;
+		u64 aq_inst_fault                    : 1;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct nixx_af_err_int_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_ERR_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_ERR_INT_ENA_W1C(void)
+{
+	return 0x198;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_err_int_ena_w1s
+ *
+ * NIX Admin Function Error Interrupt Enable Set Register This register
+ * sets interrupt enable bits.
+ */
+union nixx_af_err_int_ena_w1s {
+	u64 u;
+	struct nixx_af_err_int_ena_w1s_s {
+		u64 rx_mcast_data_fault              : 1;
+		u64 rx_mirror_data_fault             : 1;
+		u64 rx_mcast_wqe_fault               : 1;
+		u64 rx_mirror_wqe_fault              : 1;
+		u64 rx_mce_fault                     : 1;
+		u64 rx_mce_list_err                  : 1;
+		u64 rx_unmapped_pf_func              : 1;
+		u64 reserved_7_11                    : 5;
+		u64 aq_door_err                      : 1;
+		u64 aq_res_fault                     : 1;
+		u64 aq_inst_fault                    : 1;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct nixx_af_err_int_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_ERR_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_ERR_INT_ENA_W1S(void)
+{
+	return 0x190;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_err_int_w1s
+ *
+ * NIX Admin Function Error Interrupt Set Register This register sets
+ * interrupt bits.
+ */
+union nixx_af_err_int_w1s {
+	u64 u;
+	struct nixx_af_err_int_w1s_s {
+		u64 rx_mcast_data_fault              : 1;
+		u64 rx_mirror_data_fault             : 1;
+		u64 rx_mcast_wqe_fault               : 1;
+		u64 rx_mirror_wqe_fault              : 1;
+		u64 rx_mce_fault                     : 1;
+		u64 rx_mce_list_err                  : 1;
+		u64 rx_unmapped_pf_func              : 1;
+		u64 reserved_7_11                    : 5;
+		u64 aq_door_err                      : 1;
+		u64 aq_res_fault                     : 1;
+		u64 aq_inst_fault                    : 1;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct nixx_af_err_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_ERR_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_ERR_INT_W1S(void)
+{
+	return 0x188;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_expr_tx_fifo_status
+ *
+ * INTERNAL: NIX AF Express Transmit FIFO Status Register  Internal:
+ * 802.3br frame preemption/express path is defeatured. Old definition:
+ * Status of FIFO which transmits express packets to CGX and LBK.
+ */
+union nixx_af_expr_tx_fifo_status {
+	u64 u;
+	struct nixx_af_expr_tx_fifo_status_s {
+		u64 count                            : 12;
+		u64 reserved_12_63                   : 52;
+	} s;
+	/* struct nixx_af_expr_tx_fifo_status_s cn; */
+};
+
+static inline u64 NIXX_AF_EXPR_TX_FIFO_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_EXPR_TX_FIFO_STATUS(void)
+{
+	return 0x640;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_gen_int
+ *
+ * NIX AF General Interrupt Register
+ */
+union nixx_af_gen_int {
+	u64 u;
+	struct nixx_af_gen_int_s {
+		u64 rx_mcast_drop                    : 1;
+		u64 rx_mirror_drop                   : 1;
+		u64 reserved_2                       : 1;
+		u64 tl1_drain                        : 1;
+		u64 smq_flush_done                   : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	/* struct nixx_af_gen_int_s cn; */
+};
+
+static inline u64 NIXX_AF_GEN_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_GEN_INT(void)
+{
+	return 0x160;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_gen_int_ena_w1c
+ *
+ * NIX AF General Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_af_gen_int_ena_w1c {
+	u64 u;
+	struct nixx_af_gen_int_ena_w1c_s {
+		u64 rx_mcast_drop                    : 1;
+		u64 rx_mirror_drop                   : 1;
+		u64 reserved_2                       : 1;
+		u64 tl1_drain                        : 1;
+		u64 smq_flush_done                   : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	/* struct nixx_af_gen_int_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_GEN_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_GEN_INT_ENA_W1C(void)
+{
+	return 0x178;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_gen_int_ena_w1s
+ *
+ * NIX AF General Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union nixx_af_gen_int_ena_w1s {
+	u64 u;
+	struct nixx_af_gen_int_ena_w1s_s {
+		u64 rx_mcast_drop                    : 1;
+		u64 rx_mirror_drop                   : 1;
+		u64 reserved_2                       : 1;
+		u64 tl1_drain                        : 1;
+		u64 smq_flush_done                   : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	/* struct nixx_af_gen_int_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_GEN_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_GEN_INT_ENA_W1S(void)
+{
+	return 0x170;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_gen_int_w1s
+ *
+ * NIX AF General Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union nixx_af_gen_int_w1s {
+	u64 u;
+	struct nixx_af_gen_int_w1s_s {
+		u64 rx_mcast_drop                    : 1;
+		u64 rx_mirror_drop                   : 1;
+		u64 reserved_2                       : 1;
+		u64 tl1_drain                        : 1;
+		u64 smq_flush_done                   : 1;
+		u64 reserved_5_63                    : 59;
+	} s;
+	/* struct nixx_af_gen_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_GEN_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_GEN_INT_W1S(void)
+{
+	return 0x168;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cfg
+ *
+ * NIX AF Local Function Configuration Registers
+ */
+union nixx_af_lfx_cfg {
+	u64 u;
+	struct nixx_af_lfx_cfg_s {
+		u64 npa_pf_func                      : 16;
+		u64 sso_pf_func                      : 16;
+		u64 be                               : 1;
+		u64 xqe_size                         : 2;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct nixx_af_lfx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CFG(u64 a)
+{
+	return 0x4000 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cints_base
+ *
+ * NIX AF Local Function Completion Interrupts Base Address Registers
+ * This register specifies the base AF IOVA of LF's completion interrupt
+ * context table in NDC/LLC/DRAM. The table consists of
+ * NIX_AF_CONST2[CINTS] contiguous NIX_CINT_HW_S structures.  After
+ * writing to this register, software should read it back to ensure that
+ * the write has completed before accessing any NIX_LF_CINT()_*
+ * registers.
+ */
+union nixx_af_lfx_cints_base {
+	u64 u;
+	struct nixx_af_lfx_cints_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_lfx_cints_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CINTS_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CINTS_BASE(u64 a)
+{
+	return 0x4130 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cints_cfg
+ *
+ * NIX AF Local Function Completion Interrupts Configuration Registers
+ * This register controls access to the LF's completion interrupt context
+ * table in NDC/LLC/DRAM. The table consists of NIX_AF_CONST2[CINTS]
+ * contiguous NIX_CINT_HW_S structures. The size of each structure is 1
+ * \<\< NIX_AF_CONST3[CINT_LOG2BYTES].  After writing to this register,
+ * software should read it back to ensure that the write has completed
+ * before accessing any NIX_LF_CINT()_* registers.
+ */
+union nixx_af_lfx_cints_cfg {
+	u64 u;
+	struct nixx_af_lfx_cints_cfg_s {
+		u64 reserved_0_19                    : 20;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} s;
+	/* struct nixx_af_lfx_cints_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CINTS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CINTS_CFG(u64 a)
+{
+	return 0x4120 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cqs_base
+ *
+ * NIX AF Local Function Completion Queues Base Address Register This
+ * register specifies the base AF IOVA of the LF's CQ context table. The
+ * table consists of NIX_AF_LF()_CQS_CFG[MAX_QUEUESM1]+1 contiguous
+ * NIX_CQ_CTX_S structures.
+ */
+union nixx_af_lfx_cqs_base {
+	u64 u;
+	struct nixx_af_lfx_cqs_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_lfx_cqs_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CQS_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CQS_BASE(u64 a)
+{
+	return 0x4070 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_cqs_cfg
+ *
+ * NIX AF Local Function Completion Queues Configuration Register This
+ * register configures completion queues in the LF.
+ */
+union nixx_af_lfx_cqs_cfg {
+	u64 u;
+	struct nixx_af_lfx_cqs_cfg_s {
+		u64 max_queuesm1                     : 20;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} s;
+	/* struct nixx_af_lfx_cqs_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_CQS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_CQS_CFG(u64 a)
+{
+	return 0x4060 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_lock#
+ *
+ * NIX AF Local Function Lockdown Registers Internal: The NIX lockdown
+ * depth of 32 bytes is shallow compared to 96 bytes for NIC and meant
+ * for outer MAC and/or VLAN (optionally preceded by a small number of
+ * skip bytes). NPC's MCAM can be used for deeper protocol-aware
+ * lockdown.
+ */
+union nixx_af_lfx_lockx {
+	u64 u;
+	struct nixx_af_lfx_lockx_s {
+		u64 data                             : 32;
+		u64 bit_ena                          : 32;
+	} s;
+	/* struct nixx_af_lfx_lockx_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_LOCKX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_LOCKX(u64 a, u64 b)
+{
+	return 0x4300 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_qints_base
+ *
+ * NIX AF Local Function Queue Interrupts Base Address Registers This
+ * register specifies the base AF IOVA of LF's queue interrupt context
+ * table in NDC/LLC/DRAM. The table consists of NIX_AF_CONST2[QINTS]
+ * contiguous NIX_QINT_HW_S structures.  After writing to this register,
+ * software should read it back to ensure that the write has completed
+ * before accessing any NIX_LF_QINT()_* registers.
+ */
+union nixx_af_lfx_qints_base {
+	u64 u;
+	struct nixx_af_lfx_qints_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_lfx_qints_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_QINTS_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_QINTS_BASE(u64 a)
+{
+	return 0x4110 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_qints_cfg
+ *
+ * NIX AF Local Function Queue Interrupts Configuration Registers This
+ * register controls access to the LF's queue interrupt context table in
+ * NDC/LLC/DRAM. The table consists of NIX_AF_CONST2[QINTS] contiguous
+ * NIX_QINT_HW_S structures. The size of each structure is 1 \<\<
+ * NIX_AF_CONST3[QINT_LOG2BYTES].  After writing to this register,
+ * software should read it back to ensure that the write has completed
+ * before accessing any NIX_LF_QINT()_* registers.
+ */
+union nixx_af_lfx_qints_cfg {
+	u64 u;
+	struct nixx_af_lfx_qints_cfg_s {
+		u64 reserved_0_19                    : 20;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} s;
+	/* struct nixx_af_lfx_qints_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_QINTS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_QINTS_CFG(u64 a)
+{
+	return 0x4100 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rqs_base
+ *
+ * NIX AF Local Function Receive Queues Base Address Register This
+ * register specifies the base AF IOVA of the LF's RQ context table. The
+ * table consists of NIX_AF_LF()_RQS_CFG[MAX_QUEUESM1]+1 contiguous
+ * NIX_RQ_CTX_S structures.
+ */
+union nixx_af_lfx_rqs_base {
+	u64 u;
+	struct nixx_af_lfx_rqs_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_lfx_rqs_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RQS_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RQS_BASE(u64 a)
+{
+	return 0x4050 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rqs_cfg
+ *
+ * NIX AF Local Function Receive Queues Configuration Register This
+ * register configures receive queues in the LF.
+ */
+union nixx_af_lfx_rqs_cfg {
+	u64 u;
+	struct nixx_af_lfx_rqs_cfg_s {
+		u64 max_queuesm1                     : 20;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} s;
+	/* struct nixx_af_lfx_rqs_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RQS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RQS_CFG(u64 a)
+{
+	return 0x4040 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rss_base
+ *
+ * NIX AF Local Function Receive Size Scaling Table Base Address Register
+ * This register specifies the base AF IOVA of the RSS table per LF. The
+ * table is present when NIX_AF_LF()_RSS_CFG[ENA] is set and consists of
+ * 1 \<\< (NIX_AF_LF()_RSS_CFG[SIZE] + 8) contiguous NIX_RSSE_S
+ * structures, where the size of each structure is 1 \<\<
+ * NIX_AF_CONST3[RSSE_LOG2BYTES]. See NIX_AF_LF()_RSS_GRP().
+ */
+union nixx_af_lfx_rss_base {
+	u64 u;
+	struct nixx_af_lfx_rss_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_lfx_rss_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RSS_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RSS_BASE(u64 a)
+{
+	return 0x40d0 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rss_cfg
+ *
+ * NIX AF Local Function Receive Size Scaling Table Configuration
+ * Register See NIX_AF_LF()_RSS_BASE and NIX_AF_LF()_RSS_GRP().
+ */
+union nixx_af_lfx_rss_cfg {
+	u64 u;
+	struct nixx_af_lfx_rss_cfg_s {
+		u64 size                             : 4;
+		u64 ena                              : 1;
+		u64 adder_is_tag_lsb                 : 1;
+		u64 reserved_6_19                    : 14;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} s;
+	struct nixx_af_lfx_rss_cfg_cn96xxp1 {
+		u64 size                             : 4;
+		u64 ena                              : 1;
+		u64 reserved_5_19                    : 15;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} cn96xxp1;
+	/* struct nixx_af_lfx_rss_cfg_s cn96xxp3; */
+	/* struct nixx_af_lfx_rss_cfg_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_LFX_RSS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RSS_CFG(u64 a)
+{
+	return 0x40c0 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rss_grp#
+ *
+ * NIX AF Local Function Receive Side Scaling Group Registers A receive
+ * packet targets a LF's RSS group when its NIX_RX_ACTION_S[OP] =
+ * NIX_RX_ACTIONOP_E::RSS, or its target multicast list has an entry with
+ * NIX_RX_MCE_S[OP] = NIX_RX_MCOP_E::RSS. The RSS group index (this
+ * register's last index) is NIX_RX_ACTION_S[INDEX] or
+ * NIX_RX_MCE_S[INDEX].  The RSS computation is as follows: * The
+ * packet's flow_tag (see NIX_LF_RX_SECRET()) and RSS group are used to
+ * select a NIX_RSSE_S entry in the LF's RSS table (see [SIZEM1]). *
+ * NIX_RSSE_S selects the packet's destination RQ.
+ */
+union nixx_af_lfx_rss_grpx {
+	u64 u;
+	struct nixx_af_lfx_rss_grpx_s {
+		u64 offset                           : 11;
+		u64 reserved_11_15                   : 5;
+		u64 sizem1                           : 3;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct nixx_af_lfx_rss_grpx_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RSS_GRPX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RSS_GRPX(u64 a, u64 b)
+{
+	return 0x4600 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_cfg
+ *
+ * NIX AF Local Function Receive Configuration Register
+ */
+union nixx_af_lfx_rx_cfg {
+	u64 u;
+	struct nixx_af_lfx_rx_cfg_s {
+		u64 reserved_0_31                    : 32;
+		u64 drop_re                          : 1;
+		u64 lenerr_en                        : 1;
+		u64 ip6_udp_opt                      : 1;
+		u64 dis_apad                         : 1;
+		u64 csum_il4                         : 1;
+		u64 csum_ol4                         : 1;
+		u64 len_il4                          : 1;
+		u64 len_il3                          : 1;
+		u64 len_ol4                          : 1;
+		u64 len_ol3                          : 1;
+		u64 reserved_42_63                   : 22;
+	} s;
+	struct nixx_af_lfx_rx_cfg_cn96xxp1 {
+		u64 reserved_0_31                    : 32;
+		u64 reserved_32                      : 1;
+		u64 lenerr_en                        : 1;
+		u64 ip6_udp_opt                      : 1;
+		u64 dis_apad                         : 1;
+		u64 csum_il4                         : 1;
+		u64 csum_ol4                         : 1;
+		u64 len_il4                          : 1;
+		u64 len_il3                          : 1;
+		u64 len_ol4                          : 1;
+		u64 len_ol3                          : 1;
+		u64 reserved_42_63                   : 22;
+	} cn96xxp1;
+	/* struct nixx_af_lfx_rx_cfg_s cn96xxp3; */
+	/* struct nixx_af_lfx_rx_cfg_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_CFG(u64 a)
+{
+	return 0x40a0 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_cfg0
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Configuration Registers  Internal:
+ * Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_cfg0 {
+	u64 u;
+	struct nixx_af_lfx_rx_ipsec_cfg0_s {
+		u64 lenm1_max                        : 14;
+		u64 reserved_14_15                   : 2;
+		u64 sa_pow2_size                     : 4;
+		u64 tag_const                        : 24;
+		u64 tt                               : 2;
+		u64 defcpt                           : 1;
+		u64 hshcpt                           : 1;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_lfx_rx_ipsec_cfg0_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_CFG0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_CFG0(u64 a)
+{
+	return 0x4140 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_cfg1
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Security Association Configuration
+ * Register  Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_cfg1 {
+	u64 u;
+	struct nixx_af_lfx_rx_ipsec_cfg1_s {
+		u64 sa_idx_max                       : 32;
+		u64 sa_idx_w                         : 5;
+		u64 reserved_37_63                   : 27;
+	} s;
+	/* struct nixx_af_lfx_rx_ipsec_cfg1_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_CFG1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_CFG1(u64 a)
+{
+	return 0x4148 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_dyno_base
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Dynamic Ordering Base Address
+ * Registers  Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_dyno_base {
+	u64 u;
+	struct nixx_af_lfx_rx_ipsec_dyno_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_lfx_rx_ipsec_dyno_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_DYNO_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_DYNO_BASE(u64 a)
+{
+	return 0x4158 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_dyno_cfg
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Dynamic Ordering Base Address
+ * Registers  Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_dyno_cfg {
+	u64 u;
+	struct nixx_af_lfx_rx_ipsec_dyno_cfg_s {
+		u64 dyno_idx_w                       : 4;
+		u64 dyno_ena                         : 1;
+		u64 reserved_5_19                    : 15;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} s;
+	/* struct nixx_af_lfx_rx_ipsec_dyno_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_DYNO_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_DYNO_CFG(u64 a)
+{
+	return 0x4150 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_ipsec_sa_base
+ *
+ * INTERNAL: NIX AF LF Receive IPSEC Security Association Base Address
+ * Register  Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_lfx_rx_ipsec_sa_base {
+	u64 u;
+	struct nixx_af_lfx_rx_ipsec_sa_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_lfx_rx_ipsec_sa_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_IPSEC_SA_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_IPSEC_SA_BASE(u64 a)
+{
+	return 0x4170 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_stat#
+ *
+ * NIX AF Local Function Receive Statistics Registers The last dimension
+ * indicates which statistic, and is enumerated by NIX_STAT_LF_RX_E.
+ */
+union nixx_af_lfx_rx_statx {
+	u64 u;
+	struct nixx_af_lfx_rx_statx_s {
+		u64 stat                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_lfx_rx_statx_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_STATX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_STATX(u64 a, u64 b)
+{
+	return 0x4500 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_rx_vtag_type#
+ *
+ * NIX AF Local Function Receive Vtag Type Registers These registers
+ * specify optional Vtag (e.g. VLAN, E-TAG) actions for received packets.
+ * Indexed by NIX_RX_VTAG_ACTION_S[VTAG*_TYPE].
+ */
+union nixx_af_lfx_rx_vtag_typex {
+	u64 u;
+	struct nixx_af_lfx_rx_vtag_typex_s {
+		u64 size                             : 1;
+		u64 reserved_1_3                     : 3;
+		u64 strip                            : 1;
+		u64 capture                          : 1;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct nixx_af_lfx_rx_vtag_typex_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_RX_VTAG_TYPEX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_RX_VTAG_TYPEX(u64 a, u64 b)
+{
+	return 0x4200 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_sqs_base
+ *
+ * NIX AF Local Function Send Queues Base Address Register This register
+ * specifies the base AF IOVA of the LF's SQ context table. The table
+ * consists of NIX_AF_LF()_SQS_CFG[MAX_QUEUESM1]+1 contiguous
+ * NIX_SQ_CTX_HW_S structures.
+ */
+union nixx_af_lfx_sqs_base {
+	u64 u;
+	struct nixx_af_lfx_sqs_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_lfx_sqs_base_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_SQS_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_SQS_BASE(u64 a)
+{
+	return 0x4030 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_sqs_cfg
+ *
+ * NIX AF Local Function Send Queues Configuration Register This register
+ * configures send queues in the LF.
+ */
+union nixx_af_lfx_sqs_cfg {
+	u64 u;
+	struct nixx_af_lfx_sqs_cfg_s {
+		u64 max_queuesm1                     : 20;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} s;
+	/* struct nixx_af_lfx_sqs_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_SQS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_SQS_CFG(u64 a)
+{
+	return 0x4020 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_cfg
+ *
+ * NIX AF Local Function Transmit Configuration Register
+ */
+union nixx_af_lfx_tx_cfg {
+	u64 u;
+	struct nixx_af_lfx_tx_cfg_s {
+		u64 vlan0_ins_etype                  : 16;
+		u64 vlan1_ins_etype                  : 16;
+		u64 send_tstmp_ena                   : 1;
+		u64 lock_viol_cqe_ena                : 1;
+		u64 lock_ena                         : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct nixx_af_lfx_tx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_CFG(u64 a)
+{
+	return 0x4080 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_cfg2
+ *
+ * NIX AF Local Function Transmit Configuration Register
+ */
+union nixx_af_lfx_tx_cfg2 {
+	u64 u;
+	struct nixx_af_lfx_tx_cfg2_s {
+		u64 lmt_ena                          : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_lfx_tx_cfg2_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_CFG2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_CFG2(u64 a)
+{
+	return 0x4028 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_parse_cfg
+ *
+ * NIX AF Local Function Transmit Parse Configuration Register
+ */
+union nixx_af_lfx_tx_parse_cfg {
+	u64 u;
+	struct nixx_af_lfx_tx_parse_cfg_s {
+		u64 pkind                            : 6;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct nixx_af_lfx_tx_parse_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_PARSE_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_PARSE_CFG(u64 a)
+{
+	return 0x4090 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_stat#
+ *
+ * NIX AF Local Function Transmit Statistics Registers The last dimension
+ * indicates which statistic, and is enumerated by NIX_STAT_LF_TX_E.
+ */
+union nixx_af_lfx_tx_statx {
+	u64 u;
+	struct nixx_af_lfx_tx_statx_s {
+		u64 stat                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_lfx_tx_statx_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_STATX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_STATX(u64 a, u64 b)
+{
+	return 0x4400 + 0x20000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf#_tx_status
+ *
+ * NIX AF LF Transmit Status Register
+ */
+union nixx_af_lfx_tx_status {
+	u64 u;
+	struct nixx_af_lfx_tx_status_s {
+		u64 sq_ctx_err                       : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_lfx_tx_status_s cn; */
+};
+
+static inline u64 NIXX_AF_LFX_TX_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LFX_TX_STATUS(u64 a)
+{
+	return 0x4180 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lf_rst
+ *
+ * NIX Admin Function LF Reset Register
+ */
+union nixx_af_lf_rst {
+	u64 u;
+	struct nixx_af_lf_rst_s {
+		u64 lf                               : 8;
+		u64 reserved_8_11                    : 4;
+		u64 exec                             : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct nixx_af_lf_rst_s cn; */
+};
+
+static inline u64 NIXX_AF_LF_RST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LF_RST(void)
+{
+	return 0x150;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lso_cfg
+ *
+ * NIX AF Large Send Offload Configuration Register
+ */
+union nixx_af_lso_cfg {
+	u64 u;
+	struct nixx_af_lso_cfg_s {
+		u64 tcp_lsf                          : 16;
+		u64 tcp_msf                          : 16;
+		u64 tcp_fsf                          : 16;
+		u64 reserved_48_62                   : 15;
+		u64 enable                           : 1;
+	} s;
+	/* struct nixx_af_lso_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_LSO_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LSO_CFG(void)
+{
+	return 0xa8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_lso_format#_field#
+ *
+ * NIX AF Large Send Offload Format Field Registers These registers
+ * specify LSO packet modification formats. Each format may modify up to
+ * eight packet fields with the following constraints: * If fewer than
+ * eight fields are modified, [ALG] must be NIX_LSOALG_E::NOP in the
+ * unused field registers. * Modified fields must be specified in
+ * contiguous field registers starting with NIX_AF_LSO_FORMAT()_FIELD(0).
+ * * Modified fields cannot overlap. * Multiple fields with the same
+ * [LAYER] value must be specified in ascending [OFFSET] order. * Fields
+ * in different layers must be specified in ascending [LAYER] order.
+ */
+union nixx_af_lso_formatx_fieldx {
+	u64 u;
+	struct nixx_af_lso_formatx_fieldx_s {
+		u64 offset                           : 8;
+		u64 layer                            : 2;
+		u64 reserved_10_11                   : 2;
+		u64 sizem1                           : 2;
+		u64 reserved_14_15                   : 2;
+		u64 alg                              : 3;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct nixx_af_lso_formatx_fieldx_s cn; */
+};
+
+static inline u64 NIXX_AF_LSO_FORMATX_FIELDX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_LSO_FORMATX_FIELDX(u64 a, u64 b)
+{
+	return 0x1b00 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mark_format#_ctl
+ *
+ * NIX AF Packet Marking Format Registers Describes packet marking
+ * calculations for YELLOW and for NIX_COLORRESULT_E::RED_SEND packets.
+ * NIX_SEND_EXT_S[MARKFORM] selects the CSR used for the packet
+ * descriptor.  All the packet marking offset calculations assume big-
+ * endian bits within a byte.  For example, if NIX_SEND_EXT_S[MARKPTR] is
+ * 3 and [OFFSET] is 5 and the packet is YELLOW, the NIX marking hardware
+ * would do this:  _  byte[3]\<2:0\> |=   [Y_VAL]\<3:1\> _
+ * byte[3]\<2:0\> &= ~[Y_MASK]\<3:1\> _  byte[4]\<7\>   |=   [Y_VAL]\<0\>
+ * _  byte[4]\<7\>   &= ~[Y_MASK]\<0\>  where byte[3] is the third byte
+ * in the packet, and byte[4] the fourth.  For another example, if
+ * NIX_SEND_EXT_S[MARKPTR] is 3 and [OFFSET] is 0 and the packet is
+ * NIX_COLORRESULT_E::RED_SEND,  _   byte[3]\<7:4\> |=   [R_VAL]\<3:0\> _
+ * byte[3]\<7:4\> &= ~[R_MASK]\<3:0\>
+ */
+union nixx_af_mark_formatx_ctl {
+	u64 u;
+	struct nixx_af_mark_formatx_ctl_s {
+		u64 r_val                            : 4;
+		u64 r_mask                           : 4;
+		u64 y_val                            : 4;
+		u64 y_mask                           : 4;
+		u64 offset                           : 3;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct nixx_af_mark_formatx_ctl_s cn; */
+};
+
+static inline u64 NIXX_AF_MARK_FORMATX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MARK_FORMATX_CTL(u64 a)
+{
+	return 0x900 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mc_mirror_const
+ *
+ * NIX AF Multicast/Mirror Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_mc_mirror_const {
+	u64 u;
+	struct nixx_af_mc_mirror_const_s {
+		u64 buf_size                         : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_mc_mirror_const_s cn; */
+};
+
+static inline u64 NIXX_AF_MC_MIRROR_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MC_MIRROR_CONST(void)
+{
+	return 0x98;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_cir
+ *
+ * NIX AF Meta Descriptor Queue Committed Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_mdqx_cir {
+	u64 u;
+	struct nixx_af_mdqx_cir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_mdqx_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_CIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_CIR(u64 a)
+{
+	return 0x1420 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_md_debug
+ *
+ * NIX AF Meta Descriptor Queue Meta Descriptor State Debug Registers
+ * This register provides access to the meta descriptor at the front of
+ * the MDQ. An MDQ can hold up to 8 packet meta descriptors (PMD) and one
+ * flush meta descriptor (FMD).
+ */
+union nixx_af_mdqx_md_debug {
+	u64 u;
+	struct nixx_af_mdqx_md_debug_s {
+		u64 pkt_len                          : 16;
+		u64 red_algo_override                : 2;
+		u64 shp_dis                          : 1;
+		u64 reserved_19                      : 1;
+		u64 shp_chg                          : 9;
+		u64 reserved_29_31                   : 3;
+		u64 sqm_pkt_id                       : 13;
+		u64 reserved_45_60                   : 16;
+		u64 md_type                          : 2;
+		u64 reserved_63                      : 1;
+	} s;
+	/* struct nixx_af_mdqx_md_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_MD_DEBUG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_MD_DEBUG(u64 a)
+{
+	return 0x14c0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_parent
+ *
+ * NIX AF Meta Descriptor Queue Topology Registers
+ */
+union nixx_af_mdqx_parent {
+	u64 u;
+	struct nixx_af_mdqx_parent_s {
+		u64 reserved_0_15                    : 16;
+		u64 parent                           : 9;
+		u64 reserved_25_63                   : 39;
+	} s;
+	/* struct nixx_af_mdqx_parent_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_PARENT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_PARENT(u64 a)
+{
+	return 0x1480 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_pir
+ *
+ * NIX AF Meta Descriptor Queue Peak Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_mdqx_pir {
+	u64 u;
+	struct nixx_af_mdqx_pir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_mdqx_pir_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_PIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_PIR(u64 a)
+{
+	return 0x1430 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_pointers
+ *
+ * INTERNAL: NIX AF Meta Descriptor 4 Linked List Pointers Debug Register
+ * This register has the same bit fields as NIX_AF_TL4()_POINTERS.
+ */
+union nixx_af_mdqx_pointers {
+	u64 u;
+	struct nixx_af_mdqx_pointers_s {
+		u64 next                             : 9;
+		u64 reserved_9_15                    : 7;
+		u64 prev                             : 9;
+		u64 reserved_25_63                   : 39;
+	} s;
+	/* struct nixx_af_mdqx_pointers_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_POINTERS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_POINTERS(u64 a)
+{
+	return 0x1460 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_ptr_fifo
+ *
+ * INTERNAL: NIX Meta Descriptor Queue Pointer FIFO State Debug Registers
+ */
+union nixx_af_mdqx_ptr_fifo {
+	u64 u;
+	struct nixx_af_mdqx_ptr_fifo_s {
+		u64 tail                             : 4;
+		u64 head                             : 4;
+		u64 p_con                            : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct nixx_af_mdqx_ptr_fifo_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_PTR_FIFO(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_PTR_FIFO(u64 a)
+{
+	return 0x14d0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_sched_state
+ *
+ * NIX AF Meta Descriptor Queue Scheduling Control State Registers This
+ * register has the same bit fields as NIX_AF_TL2()_SCHED_STATE.
+ */
+union nixx_af_mdqx_sched_state {
+	u64 u;
+	struct nixx_af_mdqx_sched_state_s {
+		u64 rr_count                         : 25;
+		u64 reserved_25_63                   : 39;
+	} s;
+	/* struct nixx_af_mdqx_sched_state_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SCHED_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SCHED_STATE(u64 a)
+{
+	return 0x1440 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_schedule
+ *
+ * NIX AF Meta Descriptor Queue Scheduling Control Registers This
+ * register has the same bit fields as NIX_AF_TL2()_SCHEDULE.
+ */
+union nixx_af_mdqx_schedule {
+	u64 u;
+	struct nixx_af_mdqx_schedule_s {
+		u64 rr_quantum                       : 24;
+		u64 prio                             : 4;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_mdqx_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SCHEDULE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SCHEDULE(u64 a)
+{
+	return 0x1400 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_shape
+ *
+ * NIX AF Meta Descriptor Queue Shaping Control Registers This register
+ * has the same bit fields as NIX_AF_TL3()_SHAPE.
+ */
+union nixx_af_mdqx_shape {
+	u64 u;
+	struct nixx_af_mdqx_shape_s {
+		u64 adjust                           : 9;
+		u64 red_algo                         : 2;
+		u64 red_disable                      : 1;
+		u64 yellow_disable                   : 1;
+		u64 reserved_13_23                   : 11;
+		u64 length_disable                   : 1;
+		u64 schedule_list                    : 2;
+		u64 reserved_27_63                   : 37;
+	} s;
+	/* struct nixx_af_mdqx_shape_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SHAPE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SHAPE(u64 a)
+{
+	return 0x1410 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_shape_state
+ *
+ * NIX AF Meta Descriptor Queue Shaping State Registers This register has
+ * the same bit fields as NIX_AF_TL2()_SHAPE_STATE. This register must
+ * not be written during normal operation.
+ */
+union nixx_af_mdqx_shape_state {
+	u64 u;
+	struct nixx_af_mdqx_shape_state_s {
+		u64 cir_accum                        : 26;
+		u64 pir_accum                        : 26;
+		u64 color                            : 2;
+		u64 reserved_54_63                   : 10;
+	} s;
+	/* struct nixx_af_mdqx_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SHAPE_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SHAPE_STATE(u64 a)
+{
+	return 0x1450 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq#_sw_xoff
+ *
+ * NIX AF Meta Descriptor Controlled XOFF Registers This register has the
+ * same bit fields as NIX_AF_TL1()_SW_XOFF
+ */
+union nixx_af_mdqx_sw_xoff {
+	u64 u;
+	struct nixx_af_mdqx_sw_xoff_s {
+		u64 xoff                             : 1;
+		u64 drain                            : 1;
+		u64 reserved_2                       : 1;
+		u64 drain_irq                        : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct nixx_af_mdqx_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQX_SW_XOFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQX_SW_XOFF(u64 a)
+{
+	return 0x1470 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_mdq_const
+ *
+ * NIX AF Meta Descriptor Queue Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_mdq_const {
+	u64 u;
+	struct nixx_af_mdq_const_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_mdq_const_s cn; */
+};
+
+static inline u64 NIXX_AF_MDQ_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_MDQ_CONST(void)
+{
+	return 0x90;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ndc_cfg
+ *
+ * NIX AF General Configuration Register
+ */
+union nixx_af_ndc_cfg {
+	u64 u;
+	struct nixx_af_ndc_cfg_s {
+		u64 ndc_ign_pois                     : 1;
+		u64 byp_sq                           : 1;
+		u64 byp_sqb                          : 1;
+		u64 byp_cqs                          : 1;
+		u64 byp_cints                        : 1;
+		u64 byp_dyno                         : 1;
+		u64 byp_mce                          : 1;
+		u64 byp_rqc                          : 1;
+		u64 byp_rsse                         : 1;
+		u64 byp_mc_data                      : 1;
+		u64 byp_mc_wqe                       : 1;
+		u64 byp_mr_data                      : 1;
+		u64 byp_mr_wqe                       : 1;
+		u64 byp_qints                        : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct nixx_af_ndc_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_NDC_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_NDC_CFG(void)
+{
+	return 0x18;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ndc_rx_sync
+ *
+ * NIX AF Receive NDC Sync Register Used to synchronize the NIX receive
+ * NDC (NDC_IDX_E::NIX()_RX).
+ */
+union nixx_af_ndc_rx_sync {
+	u64 u;
+	struct nixx_af_ndc_rx_sync_s {
+		u64 lf                               : 8;
+		u64 reserved_8_11                    : 4;
+		u64 exec                             : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct nixx_af_ndc_rx_sync_s cn; */
+};
+
+static inline u64 NIXX_AF_NDC_RX_SYNC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_NDC_RX_SYNC(void)
+{
+	return 0x3e0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ndc_tx_sync
+ *
+ * NIX AF NDC_TX Sync Register Used to synchronize the NIX transmit NDC
+ * (NDC_IDX_E::NIX()_TX).
+ */
+union nixx_af_ndc_tx_sync {
+	u64 u;
+	struct nixx_af_ndc_tx_sync_s {
+		u64 lf                               : 8;
+		u64 reserved_8_11                    : 4;
+		u64 exec                             : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct nixx_af_ndc_tx_sync_s cn; */
+};
+
+static inline u64 NIXX_AF_NDC_TX_SYNC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_NDC_TX_SYNC(void)
+{
+	return 0x3f0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_norm_tx_fifo_status
+ *
+ * NIX AF Normal Transmit FIFO Status Register Status of FIFO which
+ * transmits normal packets to CGX and LBK.
+ */
+union nixx_af_norm_tx_fifo_status {
+	u64 u;
+	struct nixx_af_norm_tx_fifo_status_s {
+		u64 count                            : 12;
+		u64 reserved_12_63                   : 52;
+	} s;
+	/* struct nixx_af_norm_tx_fifo_status_s cn; */
+};
+
+static inline u64 NIXX_AF_NORM_TX_FIFO_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_NORM_TX_FIFO_STATUS(void)
+{
+	return 0x648;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq#_dbg_arb_link_exp
+ *
+ * INTERNAL: NIX AF PQ Arb Link EXPRESS Debug Register
+ */
+union nixx_af_pqx_dbg_arb_link_exp {
+	u64 u;
+	struct nixx_af_pqx_dbg_arb_link_exp_s {
+		u64 req                              : 1;
+		u64 act_c_con                        : 1;
+		u64 cnt                              : 2;
+		u64 reserved_4_5                     : 2;
+		u64 rr_mask                          : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct nixx_af_pqx_dbg_arb_link_exp_s cn; */
+};
+
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_EXP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_EXP(u64 a)
+{
+	return 0xce8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq#_dbg_arb_link_nrm
+ *
+ * INTERNAL: NIX AF PQ Arb Link NORMAL Debug Register
+ */
+union nixx_af_pqx_dbg_arb_link_nrm {
+	u64 u;
+	struct nixx_af_pqx_dbg_arb_link_nrm_s {
+		u64 req                              : 1;
+		u64 act_c_con                        : 1;
+		u64 cnt                              : 2;
+		u64 reserved_4_5                     : 2;
+		u64 rr_mask                          : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct nixx_af_pqx_dbg_arb_link_nrm_s cn; */
+};
+
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_NRM(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_NRM(u64 a)
+{
+	return 0xce0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq#_dbg_arb_link_sdp
+ *
+ * INTERNAL: NIX AF PQ Arb Link SDP Debug Register
+ */
+union nixx_af_pqx_dbg_arb_link_sdp {
+	u64 u;
+	struct nixx_af_pqx_dbg_arb_link_sdp_s {
+		u64 req                              : 1;
+		u64 act_c_con                        : 1;
+		u64 cnt                              : 2;
+		u64 reserved_4_5                     : 2;
+		u64 rr_mask                          : 1;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct nixx_af_pqx_dbg_arb_link_sdp_s cn; */
+};
+
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_SDP(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQX_DBG_ARB_LINK_SDP(u64 a)
+{
+	return 0xcf0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_crd_rdy_debug
+ *
+ * INTERNAL: NIX AF PQ_ARB Node Credit Ready Registers  NIX AF PQ ARB
+ * Credit ready register
+ */
+union nixx_af_pq_arb_crd_rdy_debug {
+	u64 u;
+	struct nixx_af_pq_arb_crd_rdy_debug_s {
+		u64 node_crd_rdy                     : 28;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_pq_arb_crd_rdy_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_CRD_RDY_DEBUG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_CRD_RDY_DEBUG(void)
+{
+	return 0xf10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_dwrr_msk_debug
+ *
+ * INTERNAL: NIX AF PQ_ARB DWRR mask set read only debug Registers
+ */
+union nixx_af_pq_arb_dwrr_msk_debug {
+	u64 u;
+	struct nixx_af_pq_arb_dwrr_msk_debug_s {
+		u64 node_dwrr_mask_set               : 28;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_pq_arb_dwrr_msk_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_DWRR_MSK_DEBUG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_DWRR_MSK_DEBUG(void)
+{
+	return 0xf30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_node_gnt_debug
+ *
+ * INTERNAL: NIX AF PQ_ARB Node Grant vector Registers
+ */
+union nixx_af_pq_arb_node_gnt_debug {
+	u64 u;
+	struct nixx_af_pq_arb_node_gnt_debug_s {
+		u64 node_grant_vec                   : 28;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_pq_arb_node_gnt_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_NODE_GNT_DEBUG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_NODE_GNT_DEBUG(void)
+{
+	return 0xf20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_node_req_debug
+ *
+ * INTERNAL: NIX AF PQ_ARB Node Request Debug Registers  NIX AF PQ ARB
+ * Node Request Debug register
+ */
+union nixx_af_pq_arb_node_req_debug {
+	u64 u;
+	struct nixx_af_pq_arb_node_req_debug_s {
+		u64 node_req                         : 28;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_pq_arb_node_req_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_NODE_REQ_DEBUG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_NODE_REQ_DEBUG(void)
+{
+	return 0xf00;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_arb_shape_vld_dbg
+ *
+ * INTERNAL: NIX AF PQ_ARB shape valid set Register
+ */
+union nixx_af_pq_arb_shape_vld_dbg {
+	u64 u;
+	struct nixx_af_pq_arb_shape_vld_dbg_s {
+		u64 node_shape_vld_set               : 28;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_pq_arb_shape_vld_dbg_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_ARB_SHAPE_VLD_DBG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_ARB_SHAPE_VLD_DBG(void)
+{
+	return 0xf40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_dbg_arb_0
+ *
+ * INTERNAL: NIX AF PQ Arb Debug 0 Register
+ */
+union nixx_af_pq_dbg_arb_0 {
+	u64 u;
+	struct nixx_af_pq_dbg_arb_0_s {
+		u64 rr_mask_clr                      : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_pq_dbg_arb_0_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_DBG_ARB_0(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_DBG_ARB_0(void)
+{
+	return 0xcf8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pq_lnk_#_dwrr_msk_dbg
+ *
+ * INTERNAL: NIX AF PQ_ARB Physical Link DWRR MASK Registers
+ */
+union nixx_af_pq_lnk_x_dwrr_msk_dbg {
+	u64 u;
+	struct nixx_af_pq_lnk_x_dwrr_msk_dbg_s {
+		u64 link_dwrr_mask_set               : 28;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_pq_lnk_x_dwrr_msk_dbg_s cn; */
+};
+
+static inline u64 NIXX_AF_PQ_LNK_X_DWRR_MSK_DBG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PQ_LNK_X_DWRR_MSK_DBG(u64 a)
+{
+	return 0x1100 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_400_rate_divider
+ *
+ * INTERNAL: NIX AF PSE 400 Rate Divider Register
+ */
+union nixx_af_pse_400_rate_divider {
+	u64 u;
+	struct nixx_af_pse_400_rate_divider_s {
+		u64 rate_div_cfg                     : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct nixx_af_pse_400_rate_divider_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_400_RATE_DIVIDER(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_400_RATE_DIVIDER(void)
+{
+	return 0x830;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_active_cycles_pc
+ *
+ * NIX AF Active Cycles Register These registers are indexed by the
+ * conditional clock domain number.
+ */
+union nixx_af_pse_active_cycles_pc {
+	u64 u;
+	struct nixx_af_pse_active_cycles_pc_s {
+		u64 act_cyc                          : 64;
+	} s;
+	/* struct nixx_af_pse_active_cycles_pc_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_ACTIVE_CYCLES_PC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_ACTIVE_CYCLES_PC(void)
+{
+	return 0x8c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_bp_test0
+ *
+ * INTERNAL: NIX AF PSE Backpressure Test 0 Register
+ */
+union nixx_af_pse_bp_test0 {
+	u64 u;
+	struct nixx_af_pse_bp_test0_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_63                   : 52;
+	} s;
+	struct nixx_af_pse_bp_test0_cn96xxp1 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_59                   : 36;
+		u64 enable                           : 4;
+	} cn96xxp1;
+	struct nixx_af_pse_bp_test0_cn96xxp3 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 reserved_16_19                   : 4;
+		u64 bp_cfg                           : 12;
+		u64 reserved_32_55                   : 24;
+		u64 reserved_56_57                   : 2;
+		u64 enable                           : 6;
+	} cn96xxp3;
+	/* struct nixx_af_pse_bp_test0_cn96xxp1 cnf95xxp1; */
+	struct nixx_af_pse_bp_test0_cnf95xxp2 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_31                   : 8;
+		u64 reserved_32_55                   : 24;
+		u64 reserved_56_59                   : 4;
+		u64 enable                           : 4;
+	} cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_PSE_BP_TEST0(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_BP_TEST0(void)
+{
+	return 0x840;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_bp_test1
+ *
+ * INTERNAL: NIX AF PSE Backpressure Test 1 Register
+ */
+union nixx_af_pse_bp_test1 {
+	u64 u;
+	struct nixx_af_pse_bp_test1_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 10;
+		u64 reserved_26_63                   : 38;
+	} s;
+	struct nixx_af_pse_bp_test1_cn96xxp1 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_59                   : 36;
+		u64 enable                           : 4;
+	} cn96xxp1;
+	struct nixx_af_pse_bp_test1_cn96xxp3 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 10;
+		u64 reserved_26_31                   : 6;
+		u64 reserved_32_55                   : 24;
+		u64 reserved_56_58                   : 3;
+		u64 enable                           : 5;
+	} cn96xxp3;
+	/* struct nixx_af_pse_bp_test1_cn96xxp1 cnf95xxp1; */
+	struct nixx_af_pse_bp_test1_cnf95xxp2 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_31                   : 8;
+		u64 reserved_32_55                   : 24;
+		u64 reserved_56_59                   : 4;
+		u64 enable                           : 4;
+	} cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_PSE_BP_TEST1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_BP_TEST1(void)
+{
+	return 0x850;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_bp_test2
+ *
+ * INTERNAL: NIX AF PSE Backpressure Test 2 Register
+ */
+union nixx_af_pse_bp_test2 {
+	u64 u;
+	struct nixx_af_pse_bp_test2_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 10;
+		u64 reserved_26_63                   : 38;
+	} s;
+	struct nixx_af_pse_bp_test2_cn96xxp1 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_59                   : 36;
+		u64 enable                           : 4;
+	} cn96xxp1;
+	struct nixx_af_pse_bp_test2_cn96xxp3 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 10;
+		u64 reserved_26_31                   : 6;
+		u64 reserved_32_55                   : 24;
+		u64 reserved_56_58                   : 3;
+		u64 enable                           : 5;
+	} cn96xxp3;
+	/* struct nixx_af_pse_bp_test2_cn96xxp1 cnf95xxp1; */
+	struct nixx_af_pse_bp_test2_cnf95xxp2 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_31                   : 8;
+		u64 reserved_32_55                   : 24;
+		u64 reserved_56_59                   : 4;
+		u64 enable                           : 4;
+	} cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_PSE_BP_TEST2(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_BP_TEST2(void)
+{
+	return 0x860;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_bp_test3
+ *
+ * INTERNAL: NIX AF PSE Backpressure Test 3 Register
+ */
+union nixx_af_pse_bp_test3 {
+	u64 u;
+	struct nixx_af_pse_bp_test3_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 10;
+		u64 reserved_26_63                   : 38;
+	} s;
+	struct nixx_af_pse_bp_test3_cn96xxp1 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_59                   : 36;
+		u64 enable                           : 4;
+	} cn96xxp1;
+	struct nixx_af_pse_bp_test3_cn96xxp3 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 10;
+		u64 reserved_26_31                   : 6;
+		u64 reserved_32_55                   : 24;
+		u64 reserved_56_58                   : 3;
+		u64 enable                           : 5;
+	} cn96xxp3;
+	/* struct nixx_af_pse_bp_test3_cn96xxp1 cnf95xxp1; */
+	struct nixx_af_pse_bp_test3_cnf95xxp2 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_31                   : 8;
+		u64 reserved_32_55                   : 24;
+		u64 reserved_56_59                   : 4;
+		u64 enable                           : 4;
+	} cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_PSE_BP_TEST3(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_BP_TEST3(void)
+{
+	return 0x870;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_channel_level
+ *
+ * NIX AF PSE Channel Level Register
+ */
+union nixx_af_pse_channel_level {
+	u64 u;
+	struct nixx_af_pse_channel_level_s {
+		u64 bp_level                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_pse_channel_level_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_CHANNEL_LEVEL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_CHANNEL_LEVEL(void)
+{
+	return 0x800;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_const
+ *
+ * NIX AF PSE Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_pse_const {
+	u64 u;
+	struct nixx_af_pse_const_s {
+		u64 levels                           : 4;
+		u64 reserved_4_7                     : 4;
+		u64 mark_formats                     : 8;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_pse_const_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_CONST(void)
+{
+	return 0x60;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_eco
+ *
+ * INTERNAL: AF PSE ECO Register
+ */
+union nixx_af_pse_eco {
+	u64 u;
+	struct nixx_af_pse_eco_s {
+		u64 eco_rw                           : 64;
+	} s;
+	/* struct nixx_af_pse_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_ECO(void)
+{
+	return 0x5d0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_expr_bp_test
+ *
+ * INTERNAL: NIX AF PSE Express Backpressure Test Register  Internal:
+ * 802.3br frame preemption/express path is defeatured.
+ */
+union nixx_af_pse_expr_bp_test {
+	u64 u;
+	struct nixx_af_pse_expr_bp_test_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 32;
+		u64 enable                           : 16;
+	} s;
+	/* struct nixx_af_pse_expr_bp_test_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_EXPR_BP_TEST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_EXPR_BP_TEST(void)
+{
+	return 0x890;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_norm_bp_test
+ *
+ * INTERNAL: NIX AF PSE Normal Backpressure Test Register
+ */
+union nixx_af_pse_norm_bp_test {
+	u64 u;
+	struct nixx_af_pse_norm_bp_test_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 32;
+		u64 reserved_48_63                   : 16;
+	} s;
+	struct nixx_af_pse_norm_bp_test_cn96xxp1 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 32;
+		u64 enable                           : 16;
+	} cn96xxp1;
+	struct nixx_af_pse_norm_bp_test_cn96xxp3 {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 12;
+		u64 reserved_28_57                   : 30;
+		u64 enable                           : 6;
+	} cn96xxp3;
+	/* struct nixx_af_pse_norm_bp_test_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_PSE_NORM_BP_TEST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_NORM_BP_TEST(void)
+{
+	return 0x880;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_pse_shaper_cfg
+ *
+ * NIX AF PSE Shaper Configuration Register
+ */
+union nixx_af_pse_shaper_cfg {
+	u64 u;
+	struct nixx_af_pse_shaper_cfg_s {
+		u64 red_send_as_yellow               : 1;
+		u64 color_aware                      : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct nixx_af_pse_shaper_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_PSE_SHAPER_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_PSE_SHAPER_CFG(void)
+{
+	return 0x810;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ras
+ *
+ * NIX AF RAS Interrupt Register This register is intended for delivery
+ * of RAS events to the SCP, so should be ignored by OS drivers.
+ */
+union nixx_af_ras {
+	u64 u;
+	struct nixx_af_ras_s {
+		u64 rx_mce_poison                    : 1;
+		u64 rx_mcast_wqe_poison              : 1;
+		u64 rx_mirror_wqe_poison             : 1;
+		u64 rx_mcast_data_poison             : 1;
+		u64 rx_mirror_data_poison            : 1;
+		u64 reserved_5_31                    : 27;
+		u64 aq_ctx_poison                    : 1;
+		u64 aq_res_poison                    : 1;
+		u64 aq_inst_poison                   : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct nixx_af_ras_s cn; */
+};
+
+static inline u64 NIXX_AF_RAS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RAS(void)
+{
+	return 0x1a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ras_ena_w1c
+ *
+ * NIX AF RAS Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_af_ras_ena_w1c {
+	u64 u;
+	struct nixx_af_ras_ena_w1c_s {
+		u64 rx_mce_poison                    : 1;
+		u64 rx_mcast_wqe_poison              : 1;
+		u64 rx_mirror_wqe_poison             : 1;
+		u64 rx_mcast_data_poison             : 1;
+		u64 rx_mirror_data_poison            : 1;
+		u64 reserved_5_31                    : 27;
+		u64 aq_ctx_poison                    : 1;
+		u64 aq_res_poison                    : 1;
+		u64 aq_inst_poison                   : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct nixx_af_ras_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_RAS_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RAS_ENA_W1C(void)
+{
+	return 0x1b8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ras_ena_w1s
+ *
+ * NIX AF RAS Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union nixx_af_ras_ena_w1s {
+	u64 u;
+	struct nixx_af_ras_ena_w1s_s {
+		u64 rx_mce_poison                    : 1;
+		u64 rx_mcast_wqe_poison              : 1;
+		u64 rx_mirror_wqe_poison             : 1;
+		u64 rx_mcast_data_poison             : 1;
+		u64 rx_mirror_data_poison            : 1;
+		u64 reserved_5_31                    : 27;
+		u64 aq_ctx_poison                    : 1;
+		u64 aq_res_poison                    : 1;
+		u64 aq_inst_poison                   : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct nixx_af_ras_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_RAS_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RAS_ENA_W1S(void)
+{
+	return 0x1b0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_ras_w1s
+ *
+ * NIX AF RAS Interrupt Set Register This register sets interrupt bits.
+ */
+union nixx_af_ras_w1s {
+	u64 u;
+	struct nixx_af_ras_w1s_s {
+		u64 rx_mce_poison                    : 1;
+		u64 rx_mcast_wqe_poison              : 1;
+		u64 rx_mirror_wqe_poison             : 1;
+		u64 rx_mcast_data_poison             : 1;
+		u64 rx_mirror_data_poison            : 1;
+		u64 reserved_5_31                    : 27;
+		u64 aq_ctx_poison                    : 1;
+		u64 aq_res_poison                    : 1;
+		u64 aq_inst_poison                   : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct nixx_af_ras_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_RAS_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RAS_W1S(void)
+{
+	return 0x1a8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_reb_bp_test#
+ *
+ * INTERNAL: NIX AF REB Backpressure Test Registers
+ */
+union nixx_af_reb_bp_testx {
+	u64 u;
+	struct nixx_af_reb_bp_testx_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_47                   : 24;
+		u64 enable                           : 4;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct nixx_af_reb_bp_testx_s cn; */
+};
+
+static inline u64 NIXX_AF_REB_BP_TESTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_REB_BP_TESTX(u64 a)
+{
+	return 0x4840 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rq_const
+ *
+ * NIX AF RQ Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_rq_const {
+	u64 u;
+	struct nixx_af_rq_const_s {
+		u64 queues_per_lf                    : 24;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_rq_const_s cn; */
+};
+
+static inline u64 NIXX_AF_RQ_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RQ_CONST(void)
+{
+	return 0x50;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rqm_bp_test
+ *
+ * INTERNAL: NIX AF REB Backpressure Test Registers
+ */
+union nixx_af_rqm_bp_test {
+	u64 u;
+	struct nixx_af_rqm_bp_test_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 16;
+		u64 reserved_32_47                   : 16;
+		u64 enable                           : 8;
+		u64 reserved_56_63                   : 8;
+	} s;
+	/* struct nixx_af_rqm_bp_test_s cn; */
+};
+
+static inline u64 NIXX_AF_RQM_BP_TEST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RQM_BP_TEST(void)
+{
+	return 0x4880;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rqm_eco
+ *
+ * INTERNAL: AF RQM ECO Register
+ */
+union nixx_af_rqm_eco {
+	u64 u;
+	struct nixx_af_rqm_eco_s {
+		u64 eco_rw                           : 64;
+	} s;
+	/* struct nixx_af_rqm_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_RQM_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RQM_ECO(void)
+{
+	return 0x5a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_int
+ *
+ * NIX AF RVU Interrupt Register This register contains RVU error
+ * interrupt summary bits.
+ */
+union nixx_af_rvu_int {
+	u64 u;
+	struct nixx_af_rvu_int_s {
+		u64 unmapped_slot                    : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_rvu_int_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_INT(void)
+{
+	return 0x1c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_int_ena_w1c
+ *
+ * NIX AF RVU Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_af_rvu_int_ena_w1c {
+	u64 u;
+	struct nixx_af_rvu_int_ena_w1c_s {
+		u64 unmapped_slot                    : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_rvu_int_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_INT_ENA_W1C(void)
+{
+	return 0x1d8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_int_ena_w1s
+ *
+ * NIX AF RVU Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union nixx_af_rvu_int_ena_w1s {
+	u64 u;
+	struct nixx_af_rvu_int_ena_w1s_s {
+		u64 unmapped_slot                    : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_rvu_int_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_INT_ENA_W1S(void)
+{
+	return 0x1d0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_int_w1s
+ *
+ * NIX AF RVU Interrupt Set Register This register sets interrupt bits.
+ */
+union nixx_af_rvu_int_w1s {
+	u64 u;
+	struct nixx_af_rvu_int_w1s_s {
+		u64 unmapped_slot                    : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_rvu_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_INT_W1S(void)
+{
+	return 0x1c8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rvu_lf_cfg_debug
+ *
+ * NIX Privileged LF Configuration Debug Register This debug register
+ * allows software to lookup the reverse mapping from VF/PF slot to LF.
+ * The forward mapping is programmed with NIX_PRIV_LF()_CFG.
+ */
+union nixx_af_rvu_lf_cfg_debug {
+	u64 u;
+	struct nixx_af_rvu_lf_cfg_debug_s {
+		u64 lf                               : 12;
+		u64 lf_valid                         : 1;
+		u64 exec                             : 1;
+		u64 reserved_14_15                   : 2;
+		u64 slot                             : 8;
+		u64 pf_func                          : 16;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct nixx_af_rvu_lf_cfg_debug_s cn; */
+};
+
+static inline u64 NIXX_AF_RVU_LF_CFG_DEBUG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RVU_LF_CFG_DEBUG(void)
+{
+	return 0x8000030;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_active_cycles_pc#
+ *
+ * NIX AF Active Cycles Register These registers are indexed by the
+ * conditional clock domain number.
+ */
+union nixx_af_rx_active_cycles_pcx {
+	u64 u;
+	struct nixx_af_rx_active_cycles_pcx_s {
+		u64 act_cyc                          : 64;
+	} s;
+	/* struct nixx_af_rx_active_cycles_pcx_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_ACTIVE_CYCLES_PCX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_ACTIVE_CYCLES_PCX(u64 a)
+{
+	return 0x4800 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_bpid#_status
+ *
+ * NIX AF Receive Backpressure ID Status Registers
+ */
+union nixx_af_rx_bpidx_status {
+	u64 u;
+	struct nixx_af_rx_bpidx_status_s {
+		u64 aura_cnt                         : 32;
+		u64 cq_cnt                           : 32;
+	} s;
+	/* struct nixx_af_rx_bpidx_status_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_BPIDX_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_BPIDX_STATUS(u64 a)
+{
+	return 0x1a20 + 0x20000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_cfg
+ *
+ * NIX AF Receive Configuration Register
+ */
+union nixx_af_rx_cfg {
+	u64 u;
+	struct nixx_af_rx_cfg_s {
+		u64 cbp_ena                          : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_rx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_CFG(void)
+{
+	return 0xd0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_chan#_cfg
+ *
+ * NIX AF Receive Channel Configuration Registers
+ */
+union nixx_af_rx_chanx_cfg {
+	u64 u;
+	struct nixx_af_rx_chanx_cfg_s {
+		u64 bpid                             : 9;
+		u64 reserved_9_15                    : 7;
+		u64 bp_ena                           : 1;
+		u64 sw_xoff                          : 1;
+		u64 imp                              : 1;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct nixx_af_rx_chanx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_CHANX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_CHANX_CFG(u64 a)
+{
+	return 0x1a30 + 0x8000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_cpt#_credit
+ *
+ * INTERNAL: NIX AF Receive CPT Credit Register  Internal: Not used; no
+ * IPSEC fast-path.
+ */
+union nixx_af_rx_cptx_credit {
+	u64 u;
+	struct nixx_af_rx_cptx_credit_s {
+		u64 inst_cred_cnt                    : 22;
+		u64 reserved_22_63                   : 42;
+	} s;
+	/* struct nixx_af_rx_cptx_credit_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_CPTX_CREDIT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_CPTX_CREDIT(u64 a)
+{
+	return 0x360 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_cpt#_inst_qsel
+ *
+ * INTERNAL: NIX AF Receive CPT Instruction Queue Select Register
+ * Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_rx_cptx_inst_qsel {
+	u64 u;
+	struct nixx_af_rx_cptx_inst_qsel_s {
+		u64 slot                             : 8;
+		u64 pf_func                          : 16;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_rx_cptx_inst_qsel_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_CPTX_INST_QSEL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_CPTX_INST_QSEL(u64 a)
+{
+	return 0x320 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_iip4
+ *
+ * NIX AF Receive Inner IPv4 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner IPv4 header.
+ * Typically the same as NPC_AF_PCK_DEF_IIP4.
+ */
+union nixx_af_rx_def_iip4 {
+	u64 u;
+	struct nixx_af_rx_def_iip4_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_iip4_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_IIP4(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_IIP4(void)
+{
+	return 0x220;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_iip6
+ *
+ * NIX AF Receive Inner IPv6 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner IPv6 header.
+ */
+union nixx_af_rx_def_iip6 {
+	u64 u;
+	struct nixx_af_rx_def_iip6_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_iip6_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_IIP6(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_IIP6(void)
+{
+	return 0x240;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_ipsec#
+ *
+ * INTERNAL: NIX AF Receive IPSEC Header Definition Registers  Internal:
+ * Not used; no IPSEC fast-path.
+ */
+union nixx_af_rx_def_ipsecx {
+	u64 u;
+	struct nixx_af_rx_def_ipsecx_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11                      : 1;
+		u64 spi_offset                       : 4;
+		u64 spi_nz                           : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct nixx_af_rx_def_ipsecx_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_IPSECX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_IPSECX(u64 a)
+{
+	return 0x2b0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_isctp
+ *
+ * NIX AF Receive Inner SCTP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner SCTP header.
+ */
+union nixx_af_rx_def_isctp {
+	u64 u;
+	struct nixx_af_rx_def_isctp_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_isctp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_ISCTP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_ISCTP(void)
+{
+	return 0x2a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_itcp
+ *
+ * NIX AF Receive Inner TCP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner TCP header.
+ */
+union nixx_af_rx_def_itcp {
+	u64 u;
+	struct nixx_af_rx_def_itcp_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_itcp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_ITCP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_ITCP(void)
+{
+	return 0x260;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_iudp
+ *
+ * NIX AF Receive Inner UDP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an inner UDP header.
+ */
+union nixx_af_rx_def_iudp {
+	u64 u;
+	struct nixx_af_rx_def_iudp_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_iudp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_IUDP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_IUDP(void)
+{
+	return 0x280;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_oip4
+ *
+ * NIX AF Receive Outer IPv4 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer IPv4 L3 header.
+ * Typically the same as NPC_AF_PCK_DEF_OIP4.
+ */
+union nixx_af_rx_def_oip4 {
+	u64 u;
+	struct nixx_af_rx_def_oip4_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_oip4_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OIP4(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OIP4(void)
+{
+	return 0x210;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_oip6
+ *
+ * NIX AF Receive Outer IPv6 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer IPv6 header.
+ * Typically the same as NPC_AF_PCK_DEF_OIP6.
+ */
+union nixx_af_rx_def_oip6 {
+	u64 u;
+	struct nixx_af_rx_def_oip6_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_oip6_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OIP6(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OIP6(void)
+{
+	return 0x230;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_ol2
+ *
+ * NIX AF Receive Outer L2 Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer L2/Ethernet header.
+ * Typically the same as NPC_AF_PCK_DEF_OL2.
+ */
+union nixx_af_rx_def_ol2 {
+	u64 u;
+	struct nixx_af_rx_def_ol2_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_ol2_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OL2(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OL2(void)
+{
+	return 0x200;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_osctp
+ *
+ * NIX AF Receive Outer SCTP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer SCTP header.
+ */
+union nixx_af_rx_def_osctp {
+	u64 u;
+	struct nixx_af_rx_def_osctp_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_osctp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OSCTP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OSCTP(void)
+{
+	return 0x290;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_otcp
+ *
+ * NIX AF Receive Outer TCP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer TCP header.
+ */
+union nixx_af_rx_def_otcp {
+	u64 u;
+	struct nixx_af_rx_def_otcp_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_otcp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OTCP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OTCP(void)
+{
+	return 0x250;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_def_oudp
+ *
+ * NIX AF Receive Outer UDP Header Definition Register Defines layer
+ * information in NPC_RESULT_S to identify an outer UDP header.
+ */
+union nixx_af_rx_def_oudp {
+	u64 u;
+	struct nixx_af_rx_def_oudp_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_af_rx_def_oudp_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_DEF_OUDP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_DEF_OUDP(void)
+{
+	return 0x270;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_flow_key_alg#_field#
+ *
+ * NIX AF Receive Flow Key Algorithm Field Registers A flow key algorithm
+ * defines how the 40-byte FLOW_KEY is formed from the received packet
+ * header. FLOW_KEY is formed using up to five header fields (this
+ * register's last index) with up to 16 bytes per field. Header fields
+ * must not overlap in FLOW_KEY.  The algorithm (index {a} (ALG) of these
+ * registers) is selected by NIX_RX_ACTION_S[FLOW_KEY_ALG] from the
+ * packet's NPC_RESULT_S[ACTION].  Internal: 40-byte FLOW_KEY is wide
+ * enough to support an IPv6 5-tuple that includes a VXLAN/GENEVE/NVGRE
+ * tunnel ID, e.g: _ Source IP: 16B. _ Dest IP: 16B. _ Source port: 2B. _
+ * Dest port: 2B. _ Tunnel VNI/VSI: 3B. _ Total: 39B.
+ */
+union nixx_af_rx_flow_key_algx_fieldx {
+	u64 u;
+	struct nixx_af_rx_flow_key_algx_fieldx_s {
+		u64 key_offset                       : 6;
+		u64 ln_mask                          : 1;
+		u64 fn_mask                          : 1;
+		u64 hdr_offset                       : 8;
+		u64 bytesm1                          : 5;
+		u64 lid                              : 3;
+		u64 reserved_24                      : 1;
+		u64 ena                              : 1;
+		u64 sel_chan                         : 1;
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct nixx_af_rx_flow_key_algx_fieldx_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_FLOW_KEY_ALGX_FIELDX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_FLOW_KEY_ALGX_FIELDX(u64 a, u64 b)
+{
+	return 0x1800 + 0x40000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_ipsec_gen_cfg
+ *
+ * INTERNAL: NIX AF Receive IPSEC General Configuration Register
+ * Internal: Not used; no IPSEC fast-path.
+ */
+union nixx_af_rx_ipsec_gen_cfg {
+	u64 u;
+	struct nixx_af_rx_ipsec_gen_cfg_s {
+		u64 param2                           : 16;
+		u64 param1                           : 16;
+		u64 opcode                           : 16;
+		u64 egrp                             : 3;
+		u64 reserved_51_63                   : 13;
+	} s;
+	/* struct nixx_af_rx_ipsec_gen_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_IPSEC_GEN_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_IPSEC_GEN_CFG(void)
+{
+	return 0x300;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_link#_cfg
+ *
+ * NIX AF Receive Link Configuration Registers Index enumerated by
+ * NIX_LINK_E.
+ */
+union nixx_af_rx_linkx_cfg {
+	u64 u;
+	struct nixx_af_rx_linkx_cfg_s {
+		u64 minlen                           : 16;
+		u64 maxlen                           : 16;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct nixx_af_rx_linkx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_LINKX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_LINKX_CFG(u64 a)
+{
+	return 0x540 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_link#_sl#_spkt_cnt
+ *
+ * INTERNAL: NIX Receive Software Sync Link Packet Count Registers  For
+ * diagnostic use only for debug of NIX_AF_RX_SW_SYNC[ENA] function. LINK
+ * index is enumerated by NIX_LINK_E. For the internal multicast/mirror
+ * link (NIX_LINK_E::MC), SL index is zero for multicast replay, one for
+ * mirror replay. SL index one is reserved for all other links.
+ * Internal: 802.3br frame preemption/express path is defeatured. Old
+ * definition of SL index: SL index is zero for non-express packets, one
+ * for express packets. For the internal NIX_LINK_E::MC, SL index is zero
+ * for multicast replay, one for mirror replay.
+ */
+union nixx_af_rx_linkx_slx_spkt_cnt {
+	u64 u;
+	struct nixx_af_rx_linkx_slx_spkt_cnt_s {
+		u64 in_cnt                           : 20;
+		u64 reserved_20_31                   : 12;
+		u64 out_cnt                          : 20;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct nixx_af_rx_linkx_slx_spkt_cnt_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_LINKX_SLX_SPKT_CNT(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_LINKX_SLX_SPKT_CNT(u64 a, u64 b)
+{
+	return 0x500 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_link#_wrr_cfg
+ *
+ * NIX AF Receive Link Weighted Round Robin Configuration Registers Index
+ * enumerated by NIX_LINK_E.
+ */
+union nixx_af_rx_linkx_wrr_cfg {
+	u64 u;
+	struct nixx_af_rx_linkx_wrr_cfg_s {
+		u64 weight                           : 8;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct nixx_af_rx_linkx_wrr_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_LINKX_WRR_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_LINKX_WRR_CFG(u64 a)
+{
+	return 0x560 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mcast_base
+ *
+ * NIX AF Receive Multicast/Mirror Table Base Address Register This
+ * register specifies the base AF IOVA of the receive multicast/mirror
+ * table in NDC/LLC/DRAM. The table consists of 1 \<\<
+ * (NIX_AF_RX_MCAST_CFG[SIZE] + 8) contiguous NIX_RX_MCE_S structures.
+ * The size of each structure is 1 \<\< NIX_AF_CONST3[MCE_LOG2BYTES].
+ * The table contains multicast/mirror replication lists. Each list
+ * consists of linked entries with NIX_RX_MCE_S[EOL] = 1 in the last
+ * entry. All lists must reside within the table size specified by
+ * NIX_AF_RX_MCAST_CFG[SIZE]. A mirror replication list will typically
+ * consist of two entries, but that is not checked or enforced by
+ * hardware.  A receive packet is multicast when the action returned by
+ * NPC has NIX_RX_ACTION_S[OP] = NIX_RX_ACTIONOP_E::MCAST. A receive
+ * packet is mirrored when the action returned by NPC has
+ * NIX_RX_ACTION_S[OP] = NIX_RX_ACTIONOP_E::MIRROR. In both cases,
+ * NIX_RX_ACTION_S[INDEX] specifies the index of the replication list's
+ * first NIX_RX_MCE_S in the table, and a linked entry with
+ * NIX_RX_MCE_S[EOL] = 1 indicates the end of list.  If a mirrored flow
+ * is part of a multicast replication list, software should include the
+ * two mirror entries in that list.  Internal: A multicast list may have
+ * multiple entries for the same LF (e.g. for future RoCE/IB multicast).
+ */
+union nixx_af_rx_mcast_base {
+	u64 u;
+	struct nixx_af_rx_mcast_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_rx_mcast_base_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_MCAST_BASE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MCAST_BASE(void)
+{
+	return 0x100;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mcast_buf_base
+ *
+ * NIX AF Receive Multicast Buffer Base Address Register This register
+ * specifies the base AF IOVA of the receive multicast buffers in
+ * NDC/LLC/DRAM. These buffers are used to temporarily store packets
+ * whose action returned by NPC has NIX_RX_ACTION_S[OP] =
+ * NIX_RX_ACTIONOP_E::MCAST. The number of buffers is configured by
+ * NIX_AF_RX_MCAST_BUF_CFG[SIZE].  If the number of free buffers is
+ * insufficient for a received multicast packet, hardware tail drops the
+ * packet and sets NIX_AF_GEN_INT[RX_MCAST_DROP].  Hardware prioritizes
+ * the processing of RX mirror packets over RX multicast packets.
+ */
+union nixx_af_rx_mcast_buf_base {
+	u64 u;
+	struct nixx_af_rx_mcast_buf_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_rx_mcast_buf_base_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_MCAST_BUF_BASE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MCAST_BUF_BASE(void)
+{
+	return 0x120;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mcast_buf_cfg
+ *
+ * NIX AF Receive Multicast Buffer Configuration Register See
+ * NIX_AF_RX_MCAST_BUF_BASE.
+ */
+union nixx_af_rx_mcast_buf_cfg {
+	u64 u;
+	struct nixx_af_rx_mcast_buf_cfg_s {
+		u64 size                             : 4;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_21_23                   : 3;
+		u64 npc_replay_pkind                 : 6;
+		u64 reserved_30_31                   : 2;
+		u64 free_buf_level                   : 11;
+		u64 reserved_43_61                   : 19;
+		u64 busy                             : 1;
+		u64 ena                              : 1;
+	} s;
+	struct nixx_af_rx_mcast_buf_cfg_cn96xxp1 {
+		u64 size                             : 4;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_21_23                   : 3;
+		u64 npc_replay_pkind                 : 6;
+		u64 reserved_30_31                   : 2;
+		u64 free_buf_level                   : 11;
+		u64 reserved_43_61                   : 19;
+		u64 reserved_62                      : 1;
+		u64 ena                              : 1;
+	} cn96xxp1;
+	/* struct nixx_af_rx_mcast_buf_cfg_s cn96xxp3; */
+	struct nixx_af_rx_mcast_buf_cfg_cnf95xxp1 {
+		u64 size                             : 4;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_21_23                   : 3;
+		u64 npc_replay_pkind                 : 6;
+		u64 reserved_30_31                   : 2;
+		u64 free_buf_level                   : 11;
+		u64 reserved_43_62                   : 20;
+		u64 ena                              : 1;
+	} cnf95xxp1;
+	/* struct nixx_af_rx_mcast_buf_cfg_s cnf95xxp2; */
+};
+
+static inline u64 NIXX_AF_RX_MCAST_BUF_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MCAST_BUF_CFG(void)
+{
+	return 0x130;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mcast_cfg
+ *
+ * NIX AF Receive Multicast/Mirror Table Configuration Register See
+ * NIX_AF_RX_MCAST_BASE.
+ */
+union nixx_af_rx_mcast_cfg {
+	u64 u;
+	struct nixx_af_rx_mcast_cfg_s {
+		u64 size                             : 4;
+		u64 max_list_lenm1                   : 8;
+		u64 reserved_12_19                   : 8;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_37_63                   : 27;
+	} s;
+	/* struct nixx_af_rx_mcast_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_MCAST_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MCAST_CFG(void)
+{
+	return 0x110;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mirror_buf_base
+ *
+ * NIX AF Receive Mirror Buffer Base Address Register This register
+ * specifies the base AF IOVA of the receive mirror buffers in
+ * NDC/LLC/DRAM. These buffers are used to temporarily store packets
+ * whose action returned by NPC has NIX_RX_ACTION_S[OP] =
+ * NIX_RX_ACTIONOP_E::MIRROR. The number of buffers is configured by
+ * NIX_AF_RX_MIRROR_BUF_CFG[SIZE].  If the number of free buffers is
+ * insufficient for a received multicast packet, hardware tail drops the
+ * packet and sets NIX_AF_GEN_INT[RX_MIRROR_DROP].  Hardware prioritizes
+ * the processing of RX mirror packets over RX multicast packets.
+ */
+union nixx_af_rx_mirror_buf_base {
+	u64 u;
+	struct nixx_af_rx_mirror_buf_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_rx_mirror_buf_base_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_MIRROR_BUF_BASE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MIRROR_BUF_BASE(void)
+{
+	return 0x140;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_mirror_buf_cfg
+ *
+ * NIX AF Receive Mirror Buffer Configuration Register See
+ * NIX_AF_RX_MIRROR_BUF_BASE.
+ */
+union nixx_af_rx_mirror_buf_cfg {
+	u64 u;
+	struct nixx_af_rx_mirror_buf_cfg_s {
+		u64 size                             : 4;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_21_23                   : 3;
+		u64 npc_replay_pkind                 : 6;
+		u64 reserved_30_31                   : 2;
+		u64 free_buf_level                   : 11;
+		u64 reserved_43_61                   : 19;
+		u64 busy                             : 1;
+		u64 ena                              : 1;
+	} s;
+	struct nixx_af_rx_mirror_buf_cfg_cn96xxp1 {
+		u64 size                             : 4;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_21_23                   : 3;
+		u64 npc_replay_pkind                 : 6;
+		u64 reserved_30_31                   : 2;
+		u64 free_buf_level                   : 11;
+		u64 reserved_43_61                   : 19;
+		u64 reserved_62                      : 1;
+		u64 ena                              : 1;
+	} cn96xxp1;
+	/* struct nixx_af_rx_mirror_buf_cfg_s cn96xxp3; */
+	struct nixx_af_rx_mirror_buf_cfg_cnf95xxp1 {
+		u64 size                             : 4;
+		u64 way_mask                         : 16;
+		u64 caching                          : 1;
+		u64 reserved_21_23                   : 3;
+		u64 npc_replay_pkind                 : 6;
+		u64 reserved_30_31                   : 2;
+		u64 free_buf_level                   : 11;
+		u64 reserved_43_62                   : 20;
+		u64 ena                              : 1;
+	} cnf95xxp1;
+	/* struct nixx_af_rx_mirror_buf_cfg_s cnf95xxp2; */
+};
+
+static inline u64 NIXX_AF_RX_MIRROR_BUF_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_MIRROR_BUF_CFG(void)
+{
+	return 0x148;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_npc_mc_drop
+ *
+ * NIX AF Multicast Drop Statistics Register The counter increments for
+ * every dropped MC packet marked by the NPC.
+ */
+union nixx_af_rx_npc_mc_drop {
+	u64 u;
+	struct nixx_af_rx_npc_mc_drop_s {
+		u64 stat                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_rx_npc_mc_drop_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_NPC_MC_DROP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_NPC_MC_DROP(void)
+{
+	return 0x4710;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_npc_mc_rcv
+ *
+ * NIX AF Multicast Receive Statistics Register The counter increments
+ * for every received MC packet marked by the NPC.
+ */
+union nixx_af_rx_npc_mc_rcv {
+	u64 u;
+	struct nixx_af_rx_npc_mc_rcv_s {
+		u64 stat                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_rx_npc_mc_rcv_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_NPC_MC_RCV(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_NPC_MC_RCV(void)
+{
+	return 0x4700;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_npc_mirror_drop
+ *
+ * NIX AF Mirror Drop Statistics Register The counter increments for
+ * every dropped MIRROR packet marked by the NPC.
+ */
+union nixx_af_rx_npc_mirror_drop {
+	u64 u;
+	struct nixx_af_rx_npc_mirror_drop_s {
+		u64 stat                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_rx_npc_mirror_drop_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_NPC_MIRROR_DROP(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_NPC_MIRROR_DROP(void)
+{
+	return 0x4730;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_npc_mirror_rcv
+ *
+ * NIX AF Mirror Receive Statistics Register The counter increments for
+ * every received MIRROR packet marked by the NPC.
+ */
+union nixx_af_rx_npc_mirror_rcv {
+	u64 u;
+	struct nixx_af_rx_npc_mirror_rcv_s {
+		u64 stat                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_rx_npc_mirror_rcv_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_NPC_MIRROR_RCV(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_NPC_MIRROR_RCV(void)
+{
+	return 0x4720;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_rx_sw_sync
+ *
+ * NIX AF Receive Software Sync Register
+ */
+union nixx_af_rx_sw_sync {
+	u64 u;
+	struct nixx_af_rx_sw_sync_s {
+		u64 ena                              : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_rx_sw_sync_s cn; */
+};
+
+static inline u64 NIXX_AF_RX_SW_SYNC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_RX_SW_SYNC(void)
+{
+	return 0x550;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sdp_hw_xoff#
+ *
+ * NIX AF SDP Transmit Link Hardware Controlled XOFF Registers .
+ */
+union nixx_af_sdp_hw_xoffx {
+	u64 u;
+	struct nixx_af_sdp_hw_xoffx_s {
+		u64 chan_xoff                        : 64;
+	} s;
+	/* struct nixx_af_sdp_hw_xoffx_s cn; */
+};
+
+static inline u64 NIXX_AF_SDP_HW_XOFFX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SDP_HW_XOFFX(u64 a)
+{
+	return 0xac0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sdp_link_credit
+ *
+ * NIX AF Transmit Link SDP Credit Register This register tracks SDP link
+ * credits.
+ */
+union nixx_af_sdp_link_credit {
+	u64 u;
+	struct nixx_af_sdp_link_credit_s {
+		u64 reserved_0                       : 1;
+		u64 cc_enable                        : 1;
+		u64 cc_packet_cnt                    : 10;
+		u64 cc_unit_cnt                      : 20;
+		u64 reserved_32_62                   : 31;
+		u64 pse_pkt_id_lmt                   : 1;
+	} s;
+	struct nixx_af_sdp_link_credit_cn96xx {
+		u64 reserved_0                       : 1;
+		u64 cc_enable                        : 1;
+		u64 cc_packet_cnt                    : 10;
+		u64 cc_unit_cnt                      : 20;
+		u64 reserved_32_62                   : 31;
+		u64 reserved_63                      : 1;
+	} cn96xx;
+	/* struct nixx_af_sdp_link_credit_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_SDP_LINK_CREDIT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SDP_LINK_CREDIT(void)
+{
+	return 0xa40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sdp_sw_xoff#
+ *
+ * INTERNAL: NIX AF SDP Transmit Link Software Controlled XOFF Registers
+ * Internal: Defeatured registers. Software should use
+ * NIX_AF_TL4()_SW_XOFF registers instead.
+ */
+union nixx_af_sdp_sw_xoffx {
+	u64 u;
+	struct nixx_af_sdp_sw_xoffx_s {
+		u64 chan_xoff                        : 64;
+	} s;
+	/* struct nixx_af_sdp_sw_xoffx_s cn; */
+};
+
+static inline u64 NIXX_AF_SDP_SW_XOFFX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SDP_SW_XOFFX(u64 a)
+{
+	return 0xa60 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sdp_tx_fifo_status
+ *
+ * NIX AF SDP Transmit FIFO Status Register Status of FIFO which
+ * transmits packets to SDP.
+ */
+union nixx_af_sdp_tx_fifo_status {
+	u64 u;
+	struct nixx_af_sdp_tx_fifo_status_s {
+		u64 count                            : 12;
+		u64 reserved_12_63                   : 52;
+	} s;
+	/* struct nixx_af_sdp_tx_fifo_status_s cn; */
+};
+
+static inline u64 NIXX_AF_SDP_TX_FIFO_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SDP_TX_FIFO_STATUS(void)
+{
+	return 0x650;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_active_cycles_pc#
+ *
+ * NIX AF Active Cycles Register These registers are indexed by the
+ * conditional clock domain number.
+ */
+union nixx_af_seb_active_cycles_pcx {
+	u64 u;
+	struct nixx_af_seb_active_cycles_pcx_s {
+		u64 act_cyc                          : 64;
+	} s;
+	/* struct nixx_af_seb_active_cycles_pcx_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_ACTIVE_CYCLES_PCX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_ACTIVE_CYCLES_PCX(u64 a)
+{
+	return 0x6c0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_bp_test
+ *
+ * INTERNAL: NIX AF SEB Backpressure Test Register
+ */
+union nixx_af_seb_bp_test {
+	u64 u;
+	struct nixx_af_seb_bp_test_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 14;
+		u64 reserved_30_47                   : 18;
+		u64 enable                           : 7;
+		u64 reserved_55_63                   : 9;
+	} s;
+	/* struct nixx_af_seb_bp_test_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_BP_TEST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_BP_TEST(void)
+{
+	return 0x630;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_cfg
+ *
+ * NIX SEB Configuration Register
+ */
+union nixx_af_seb_cfg {
+	u64 u;
+	struct nixx_af_seb_cfg_s {
+		u64 sg_ndc_sel                       : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_seb_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_CFG(void)
+{
+	return 0x5f0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_eco
+ *
+ * INTERNAL: AF SEB ECO Register
+ */
+union nixx_af_seb_eco {
+	u64 u;
+	struct nixx_af_seb_eco_s {
+		u64 eco_rw                           : 64;
+	} s;
+	/* struct nixx_af_seb_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_ECO(void)
+{
+	return 0x5c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_pipe_bp_test#
+ *
+ * INTERNAL: NIX AF SEB Pipe Backpressure Test Registers
+ */
+union nixx_af_seb_pipe_bp_testx {
+	u64 u;
+	struct nixx_af_seb_pipe_bp_testx_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 24;
+		u64 reserved_40_47                   : 8;
+		u64 enable                           : 12;
+		u64 reserved_60_63                   : 4;
+	} s;
+	/* struct nixx_af_seb_pipe_bp_testx_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_PIPE_BP_TESTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_PIPE_BP_TESTX(u64 a)
+{
+	return 0x600 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_pipeb_bp_test#
+ *
+ * INTERNAL: NIX AF SEB Pipe Backpressure Test Registers
+ */
+union nixx_af_seb_pipeb_bp_testx {
+	u64 u;
+	struct nixx_af_seb_pipeb_bp_testx_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 18;
+		u64 reserved_34_47                   : 14;
+		u64 enable                           : 9;
+		u64 reserved_57_63                   : 7;
+	} s;
+	/* struct nixx_af_seb_pipeb_bp_testx_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_PIPEB_BP_TESTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_PIPEB_BP_TESTX(u64 a)
+{
+	return 0x608 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_seb_wd_tick_divider
+ *
+ * INTERNAL: NIX AF SEB TSTMP Watchdog Tick Divider Register
+ */
+union nixx_af_seb_wd_tick_divider {
+	u64 u;
+	struct nixx_af_seb_wd_tick_divider_s {
+		u64 tick_div_cfg                     : 7;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct nixx_af_seb_wd_tick_divider_s cn; */
+};
+
+static inline u64 NIXX_AF_SEB_WD_TICK_DIVIDER(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SEB_WD_TICK_DIVIDER(void)
+{
+	return 0x6f0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_cfg
+ *
+ * NIX AF SQM PSE Queue Configuration Registers
+ */
+union nixx_af_smqx_cfg {
+	u64 u;
+	struct nixx_af_smqx_cfg_s {
+		u64 minlen                           : 7;
+		u64 desc_shp_ctl_dis                 : 1;
+		u64 maxlen                           : 16;
+		u64 lf                               : 7;
+		u64 reserved_31_35                   : 5;
+		u64 max_vtag_ins                     : 3;
+		u64 rr_minlen                        : 9;
+		u64 express                          : 1;
+		u64 flush                            : 1;
+		u64 enq_xoff                         : 1;
+		u64 pri_thr                          : 6;
+		u64 reserved_57_63                   : 7;
+	} s;
+	/* struct nixx_af_smqx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_CFG(u64 a)
+{
+	return 0x700 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_head
+ *
+ * NIX AF SQM SMQ Head Register These registers track the head of the SMQ
+ * linked list.
+ */
+union nixx_af_smqx_head {
+	u64 u;
+	struct nixx_af_smqx_head_s {
+		u64 sq_idx                           : 20;
+		u64 valid                            : 1;
+		u64 reserved_21_63                   : 43;
+	} s;
+	/* struct nixx_af_smqx_head_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_HEAD(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_HEAD(u64 a)
+{
+	return 0x710 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_nxt_head
+ *
+ * NIX AF SQM SMQ Next Head Register These registers track the next head
+ * of the SMQ linked list.
+ */
+union nixx_af_smqx_nxt_head {
+	u64 u;
+	struct nixx_af_smqx_nxt_head_s {
+		u64 sq_idx                           : 20;
+		u64 valid                            : 1;
+		u64 reserved_21_63                   : 43;
+	} s;
+	/* struct nixx_af_smqx_nxt_head_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_NXT_HEAD(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_NXT_HEAD(u64 a)
+{
+	return 0x740 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_status
+ *
+ * NIX AF SQM SMQ Status Register These registers track the status of the
+ * SMQ FIFO.
+ */
+union nixx_af_smqx_status {
+	u64 u;
+	struct nixx_af_smqx_status_s {
+		u64 level                            : 7;
+		u64 reserved_7_63                    : 57;
+	} s;
+	/* struct nixx_af_smqx_status_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_STATUS(u64 a)
+{
+	return 0x730 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_smq#_tail
+ *
+ * NIX AF SQM SMQ Head Register These registers track the tail of SMQ
+ * linked list.
+ */
+union nixx_af_smqx_tail {
+	u64 u;
+	struct nixx_af_smqx_tail_s {
+		u64 sq_idx                           : 20;
+		u64 valid                            : 1;
+		u64 reserved_21_63                   : 43;
+	} s;
+	/* struct nixx_af_smqx_tail_s cn; */
+};
+
+static inline u64 NIXX_AF_SMQX_TAIL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SMQX_TAIL(u64 a)
+{
+	return 0x720 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sq_const
+ *
+ * NIX AF SQ Constants Register This register contains constants for
+ * software discovery.
+ */
+union nixx_af_sq_const {
+	u64 u;
+	struct nixx_af_sq_const_s {
+		u64 queues_per_lf                    : 24;
+		u64 smq_depth                        : 10;
+		u64 sqb_size                         : 16;
+		u64 reserved_50_63                   : 14;
+	} s;
+	/* struct nixx_af_sq_const_s cn; */
+};
+
+static inline u64 NIXX_AF_SQ_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQ_CONST(void)
+{
+	return 0x40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sqm_active_cycles_pc
+ *
+ * NIX AF SQM Active Cycles Register These registers are indexed by the
+ * conditional clock domain number.
+ */
+union nixx_af_sqm_active_cycles_pc {
+	u64 u;
+	struct nixx_af_sqm_active_cycles_pc_s {
+		u64 act_cyc                          : 64;
+	} s;
+	/* struct nixx_af_sqm_active_cycles_pc_s cn; */
+};
+
+static inline u64 NIXX_AF_SQM_ACTIVE_CYCLES_PC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQM_ACTIVE_CYCLES_PC(void)
+{
+	return 0x770;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sqm_bp_test#
+ *
+ * INTERNAL: NIX AF SQM Backpressure Test Register
+ */
+union nixx_af_sqm_bp_testx {
+	u64 u;
+	struct nixx_af_sqm_bp_testx_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 8;
+		u64 reserved_24_59                   : 36;
+		u64 enable                           : 4;
+	} s;
+	/* struct nixx_af_sqm_bp_testx_s cn; */
+};
+
+static inline u64 NIXX_AF_SQM_BP_TESTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQM_BP_TESTX(u64 a)
+{
+	return 0x760 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sqm_dbg_ctl_status
+ *
+ * NIX AF SQM Debug Register This register is for SQM diagnostic use
+ * only.
+ */
+union nixx_af_sqm_dbg_ctl_status {
+	u64 u;
+	struct nixx_af_sqm_dbg_ctl_status_s {
+		u64 tm1                              : 8;
+		u64 tm2                              : 1;
+		u64 tm3                              : 4;
+		u64 tm4                              : 1;
+		u64 tm5                              : 1;
+		u64 tm6                              : 1;
+		u64 tm7                              : 4;
+		u64 tm8                              : 1;
+		u64 tm9                              : 1;
+		u64 tm10                             : 1;
+		u64 tm11                             : 1;
+		u64 tm12                             : 1;
+		u64 tm13                             : 1;
+		u64 reserved_26_63                   : 38;
+	} s;
+	struct nixx_af_sqm_dbg_ctl_status_cn96xxp1 {
+		u64 tm1                              : 8;
+		u64 tm2                              : 1;
+		u64 tm3                              : 4;
+		u64 tm4                              : 1;
+		u64 tm5                              : 1;
+		u64 tm6                              : 1;
+		u64 tm7                              : 4;
+		u64 tm8                              : 1;
+		u64 tm9                              : 1;
+		u64 reserved_22_63                   : 42;
+	} cn96xxp1;
+	/* struct nixx_af_sqm_dbg_ctl_status_s cn96xxp3; */
+	/* struct nixx_af_sqm_dbg_ctl_status_cn96xxp1 cnf95xxp1; */
+	struct nixx_af_sqm_dbg_ctl_status_cnf95xxp2 {
+		u64 tm1                              : 8;
+		u64 tm2                              : 1;
+		u64 tm3                              : 4;
+		u64 tm4                              : 1;
+		u64 tm5                              : 1;
+		u64 tm6                              : 1;
+		u64 tm7                              : 4;
+		u64 tm8                              : 1;
+		u64 tm9                              : 1;
+		u64 reserved_22                      : 1;
+		u64 reserved_23                      : 1;
+		u64 reserved_24                      : 1;
+		u64 reserved_25                      : 1;
+		u64 reserved_26_63                   : 38;
+	} cnf95xxp2;
+};
+
+static inline u64 NIXX_AF_SQM_DBG_CTL_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQM_DBG_CTL_STATUS(void)
+{
+	return 0x750;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_sqm_eco
+ *
+ * INTERNAL: AF SQM ECO Register
+ */
+union nixx_af_sqm_eco {
+	u64 u;
+	struct nixx_af_sqm_eco_s {
+		u64 eco_rw                           : 64;
+	} s;
+	/* struct nixx_af_sqm_eco_s cn; */
+};
+
+static inline u64 NIXX_AF_SQM_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_SQM_ECO(void)
+{
+	return 0x5b0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_status
+ *
+ * NIX AF General Status Register
+ */
+union nixx_af_status {
+	u64 u;
+	struct nixx_af_status_s {
+		u64 blk_busy                         : 10;
+		u64 calibrate_done                   : 1;
+		u64 reserved_11_15                   : 5;
+		u64 calibrate_status                 : 15;
+		u64 reserved_31_63                   : 33;
+	} s;
+	/* struct nixx_af_status_s cn; */
+};
+
+static inline u64 NIXX_AF_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_STATUS(void)
+{
+	return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tcp_timer
+ *
+ * NIX TCP Timer Register
+ */
+union nixx_af_tcp_timer {
+	u64 u;
+	struct nixx_af_tcp_timer_s {
+		u64 dur_counter                      : 16;
+		u64 lf_counter                       : 8;
+		u64 reserved_24_31                   : 8;
+		u64 duration                         : 16;
+		u64 reserved_48_62                   : 15;
+		u64 ena                              : 1;
+	} s;
+	/* struct nixx_af_tcp_timer_s cn; */
+};
+
+static inline u64 NIXX_AF_TCP_TIMER(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TCP_TIMER(void)
+{
+	return 0x1e0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_cir
+ *
+ * NIX AF Transmit Level 1 Committed Information Rate Register
+ */
+union nixx_af_tl1x_cir {
+	u64 u;
+	struct nixx_af_tl1x_cir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl1x_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_CIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_CIR(u64 a)
+{
+	return 0xc20 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_dropped_bytes
+ *
+ * NIX AF Transmit Level 1 Dropped Bytes Registers This register has the
+ * same bit fields as NIX_AF_TL1()_GREEN_BYTES.
+ */
+union nixx_af_tl1x_dropped_bytes {
+	u64 u;
+	struct nixx_af_tl1x_dropped_bytes_s {
+		u64 count                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_tl1x_dropped_bytes_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_DROPPED_BYTES(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_DROPPED_BYTES(u64 a)
+{
+	return 0xd30 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_dropped_packets
+ *
+ * NIX AF Transmit Level 1 Dropped Packets Registers This register has
+ * the same bit fields as NIX_AF_TL1()_GREEN_PACKETS.
+ */
+union nixx_af_tl1x_dropped_packets {
+	u64 u;
+	struct nixx_af_tl1x_dropped_packets_s {
+		u64 count                            : 40;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct nixx_af_tl1x_dropped_packets_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_DROPPED_PACKETS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_DROPPED_PACKETS(u64 a)
+{
+	return 0xd20 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_green
+ *
+ * INTERNAL: NIX Transmit Level 1 Green State Debug Register
+ */
+union nixx_af_tl1x_green {
+	u64 u;
+	struct nixx_af_tl1x_green_s {
+		u64 tail                             : 8;
+		u64 reserved_8_9                     : 2;
+		u64 head                             : 8;
+		u64 reserved_18_19                   : 2;
+		u64 active_vec                       : 20;
+		u64 rr_active                        : 1;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl1x_green_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_GREEN(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_GREEN(u64 a)
+{
+	return 0xc90 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_green_bytes
+ *
+ * NIX AF Transmit Level 1 Green Sent Bytes Registers
+ */
+union nixx_af_tl1x_green_bytes {
+	u64 u;
+	struct nixx_af_tl1x_green_bytes_s {
+		u64 count                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_tl1x_green_bytes_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_GREEN_BYTES(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_GREEN_BYTES(u64 a)
+{
+	return 0xd90 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_green_packets
+ *
+ * NIX AF Transmit Level 1 Green Sent Packets Registers
+ */
+union nixx_af_tl1x_green_packets {
+	u64 u;
+	struct nixx_af_tl1x_green_packets_s {
+		u64 count                            : 40;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct nixx_af_tl1x_green_packets_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_GREEN_PACKETS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_GREEN_PACKETS(u64 a)
+{
+	return 0xd80 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_md_debug0
+ *
+ * NIX AF Transmit Level 1 Meta Descriptor Debug 0 Registers
+ * NIX_AF_TL1()_MD_DEBUG0, NIX_AF_TL1()_MD_DEBUG1, NIX_AF_TL1()_MD_DEBUG2
+ * and NIX_AF_TL1()_MD_DEBUG3 provide access to the TLn queue meta
+ * descriptor. A TLn queue can hold up to two packet meta descriptors
+ * (PMD) and one flush meta descriptor (FMD): * PMD0 state is accessed
+ * with [PMD0_VLD], [PMD0_LENGTH] and NIX_AF_TL1()_MD_DEBUG1. * PMD1 is
+ * accessed with [PMD1_VLD], [PMD1_LENGTH] and NIX_AF_TL1()_MD_DEBUG2. *
+ * FMD is accessed with NIX_AF_TL1()_MD_DEBUG3.
+ */
+union nixx_af_tl1x_md_debug0 {
+	u64 u;
+	struct nixx_af_tl1x_md_debug0_s {
+		u64 pmd0_length                      : 16;
+		u64 pmd1_length                      : 16;
+		u64 pmd0_vld                         : 1;
+		u64 pmd1_vld                         : 1;
+		u64 reserved_34_45                   : 12;
+		u64 drain_pri                        : 1;
+		u64 drain                            : 1;
+		u64 c_con                            : 1;
+		u64 p_con                            : 1;
+		u64 reserved_50_51                   : 2;
+		u64 child                            : 10;
+		u64 reserved_62                      : 1;
+		u64 pmd_count                        : 1;
+	} s;
+	/* struct nixx_af_tl1x_md_debug0_s cn96xxp1; */
+	struct nixx_af_tl1x_md_debug0_cn96xxp3 {
+		u64 pmd0_length                      : 16;
+		u64 reserved_16_31                   : 16;
+		u64 pmd0_vld                         : 1;
+		u64 reserved_33                      : 1;
+		u64 reserved_34_45                   : 12;
+		u64 reserved_46                      : 1;
+		u64 reserved_47                      : 1;
+		u64 c_con                            : 1;
+		u64 p_con                            : 1;
+		u64 reserved_50_51                   : 2;
+		u64 child                            : 10;
+		u64 reserved_62                      : 1;
+		u64 reserved_63                      : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl1x_md_debug0_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL1X_MD_DEBUG0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_MD_DEBUG0(u64 a)
+{
+	return 0xcc0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_md_debug1
+ *
+ * NIX AF Transmit Level 1 Meta Descriptor Debug 1 Registers Packet meta
+ * descriptor 0 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl1x_md_debug1 {
+	u64 u;
+	struct nixx_af_tl1x_md_debug1_s {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 reserved_23                      : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	struct nixx_af_tl1x_md_debug1_cn96xxp1 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 drain                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp1;
+	struct nixx_af_tl1x_md_debug1_cn96xxp3 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 reserved_19_22                   : 4;
+		u64 flush                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl1x_md_debug1_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL1X_MD_DEBUG1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_MD_DEBUG1(u64 a)
+{
+	return 0xcc8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_md_debug2
+ *
+ * NIX AF Transmit Level 1 Meta Descriptor Debug 2 Registers Packet meta
+ * descriptor 1 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl1x_md_debug2 {
+	u64 u;
+	struct nixx_af_tl1x_md_debug2_s {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 reserved_23                      : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	struct nixx_af_tl1x_md_debug2_cn96xxp1 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 drain                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp1;
+	struct nixx_af_tl1x_md_debug2_cn96xxp3 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 reserved_19_22                   : 4;
+		u64 flush                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl1x_md_debug2_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL1X_MD_DEBUG2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_MD_DEBUG2(u64 a)
+{
+	return 0xcd0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_md_debug3
+ *
+ * NIX AF Transmit Level 1 Meta Descriptor Debug 3 Registers Flush meta
+ * descriptor debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl1x_md_debug3 {
+	u64 u;
+	struct nixx_af_tl1x_md_debug3_s {
+		u64 reserved_0_36                    : 37;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	/* struct nixx_af_tl1x_md_debug3_s cn96xxp1; */
+	struct nixx_af_tl1x_md_debug3_cn96xxp3 {
+		u64 reserved_0_36                    : 37;
+		u64 reserved_37_38                   : 2;
+		u64 reserved_39_51                   : 13;
+		u64 reserved_52_61                   : 10;
+		u64 reserved_62                      : 1;
+		u64 reserved_63                      : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl1x_md_debug3_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL1X_MD_DEBUG3(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_MD_DEBUG3(u64 a)
+{
+	return 0xcd8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_red
+ *
+ * INTERNAL: NIX Transmit Level 1 Red State Debug Register  This register
+ * has the same bit fields as NIX_AF_TL1()_YELLOW.
+ */
+union nixx_af_tl1x_red {
+	u64 u;
+	struct nixx_af_tl1x_red_s {
+		u64 tail                             : 8;
+		u64 reserved_8_9                     : 2;
+		u64 head                             : 8;
+		u64 reserved_18_63                   : 46;
+	} s;
+	/* struct nixx_af_tl1x_red_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_RED(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_RED(u64 a)
+{
+	return 0xcb0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_red_bytes
+ *
+ * NIX AF Transmit Level 1 Red Sent Bytes Registers This register has the
+ * same bit fields as NIX_AF_TL1()_GREEN_BYTES.
+ */
+union nixx_af_tl1x_red_bytes {
+	u64 u;
+	struct nixx_af_tl1x_red_bytes_s {
+		u64 count                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_tl1x_red_bytes_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_RED_BYTES(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_RED_BYTES(u64 a)
+{
+	return 0xd50 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_red_packets
+ *
+ * NIX AF Transmit Level 1 Red Sent Packets Registers This register has
+ * the same bit fields as NIX_AF_TL1()_GREEN_PACKETS.
+ */
+union nixx_af_tl1x_red_packets {
+	u64 u;
+	struct nixx_af_tl1x_red_packets_s {
+		u64 count                            : 40;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct nixx_af_tl1x_red_packets_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_RED_PACKETS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_RED_PACKETS(u64 a)
+{
+	return 0xd40 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_schedule
+ *
+ * NIX AF Transmit Level 1 Scheduling Control Register
+ */
+union nixx_af_tl1x_schedule {
+	u64 u;
+	struct nixx_af_tl1x_schedule_s {
+		u64 rr_quantum                       : 24;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_tl1x_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_SCHEDULE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_SCHEDULE(u64 a)
+{
+	return 0xc00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_shape
+ *
+ * NIX AF Transmit Level 1 Shaping Control Register
+ */
+union nixx_af_tl1x_shape {
+	u64 u;
+	struct nixx_af_tl1x_shape_s {
+		u64 adjust                           : 9;
+		u64 reserved_9_23                    : 15;
+		u64 length_disable                   : 1;
+		u64 reserved_25_63                   : 39;
+	} s;
+	struct nixx_af_tl1x_shape_cn {
+		u64 adjust                           : 9;
+		u64 reserved_9_17                    : 9;
+		u64 reserved_18_23                   : 6;
+		u64 length_disable                   : 1;
+		u64 reserved_25_63                   : 39;
+	} cn;
+};
+
+static inline u64 NIXX_AF_TL1X_SHAPE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_SHAPE(u64 a)
+{
+	return 0xc10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_shape_state
+ *
+ * NIX AF Transmit Level 1 Shape State Register This register must not be
+ * written during normal operation.
+ */
+union nixx_af_tl1x_shape_state {
+	u64 u;
+	struct nixx_af_tl1x_shape_state_s {
+		u64 cir_accum                        : 26;
+		u64 reserved_26_51                   : 26;
+		u64 color                            : 1;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct nixx_af_tl1x_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_SHAPE_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_SHAPE_STATE(u64 a)
+{
+	return 0xc50 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_sw_xoff
+ *
+ * NIX AF Transmit Level 1 Software Controlled XOFF Registers
+ */
+union nixx_af_tl1x_sw_xoff {
+	u64 u;
+	struct nixx_af_tl1x_sw_xoff_s {
+		u64 xoff                             : 1;
+		u64 drain                            : 1;
+		u64 reserved_2                       : 1;
+		u64 drain_irq                        : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct nixx_af_tl1x_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_SW_XOFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_SW_XOFF(u64 a)
+{
+	return 0xc70 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_topology
+ *
+ * NIX AF Transmit Level 1 Topology Registers
+ */
+union nixx_af_tl1x_topology {
+	u64 u;
+	struct nixx_af_tl1x_topology_s {
+		u64 reserved_0                       : 1;
+		u64 rr_prio                          : 4;
+		u64 reserved_5_31                    : 27;
+		u64 prio_anchor                      : 8;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct nixx_af_tl1x_topology_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_TOPOLOGY(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_TOPOLOGY(u64 a)
+{
+	return 0xc80 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_yellow
+ *
+ * INTERNAL: NIX Transmit Level 1 Yellow State Debug Register
+ */
+union nixx_af_tl1x_yellow {
+	u64 u;
+	struct nixx_af_tl1x_yellow_s {
+		u64 tail                             : 8;
+		u64 reserved_8_9                     : 2;
+		u64 head                             : 8;
+		u64 reserved_18_63                   : 46;
+	} s;
+	/* struct nixx_af_tl1x_yellow_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_YELLOW(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_YELLOW(u64 a)
+{
+	return 0xca0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_yellow_bytes
+ *
+ * NIX AF Transmit Level 1 Yellow Sent Bytes Registers This register has
+ * the same bit fields as NIX_AF_TL1()_GREEN_BYTES.
+ */
+union nixx_af_tl1x_yellow_bytes {
+	u64 u;
+	struct nixx_af_tl1x_yellow_bytes_s {
+		u64 count                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_af_tl1x_yellow_bytes_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_YELLOW_BYTES(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_YELLOW_BYTES(u64 a)
+{
+	return 0xd70 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1#_yellow_packets
+ *
+ * NIX AF Transmit Level 1 Yellow Sent Packets Registers This register
+ * has the same bit fields as NIX_AF_TL1()_GREEN_PACKETS.
+ */
+union nixx_af_tl1x_yellow_packets {
+	u64 u;
+	struct nixx_af_tl1x_yellow_packets_s {
+		u64 count                            : 40;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct nixx_af_tl1x_yellow_packets_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1X_YELLOW_PACKETS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1X_YELLOW_PACKETS(u64 a)
+{
+	return 0xd60 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl1_const
+ *
+ * NIX AF Transmit Level 1 Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_tl1_const {
+	u64 u;
+	struct nixx_af_tl1_const_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_tl1_const_s cn; */
+};
+
+static inline u64 NIXX_AF_TL1_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL1_CONST(void)
+{
+	return 0x70;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_cir
+ *
+ * NIX AF Transmit Level 2 Committed Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl2x_cir {
+	u64 u;
+	struct nixx_af_tl2x_cir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl2x_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_CIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_CIR(u64 a)
+{
+	return 0xe20 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_green
+ *
+ * INTERNAL: NIX Transmit Level 2 Green State Debug Register  This
+ * register has the same bit fields as NIX_AF_TL1()_GREEN.
+ */
+union nixx_af_tl2x_green {
+	u64 u;
+	struct nixx_af_tl2x_green_s {
+		u64 tail                             : 8;
+		u64 reserved_8_9                     : 2;
+		u64 head                             : 8;
+		u64 reserved_18_19                   : 2;
+		u64 active_vec                       : 20;
+		u64 rr_active                        : 1;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl2x_green_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_GREEN(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_GREEN(u64 a)
+{
+	return 0xe90 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_md_debug0
+ *
+ * NIX AF Transmit Level 2 Meta Descriptor Debug 0 Registers See
+ * NIX_AF_TL1()_MD_DEBUG0
+ */
+union nixx_af_tl2x_md_debug0 {
+	u64 u;
+	struct nixx_af_tl2x_md_debug0_s {
+		u64 pmd0_length                      : 16;
+		u64 pmd1_length                      : 16;
+		u64 pmd0_vld                         : 1;
+		u64 pmd1_vld                         : 1;
+		u64 reserved_34_45                   : 12;
+		u64 drain_pri                        : 1;
+		u64 drain                            : 1;
+		u64 c_con                            : 1;
+		u64 p_con                            : 1;
+		u64 reserved_50_51                   : 2;
+		u64 child                            : 10;
+		u64 reserved_62                      : 1;
+		u64 pmd_count                        : 1;
+	} s;
+	/* struct nixx_af_tl2x_md_debug0_s cn96xxp1; */
+	struct nixx_af_tl2x_md_debug0_cn96xxp3 {
+		u64 pmd0_length                      : 16;
+		u64 reserved_16_31                   : 16;
+		u64 pmd0_vld                         : 1;
+		u64 reserved_33                      : 1;
+		u64 reserved_34_45                   : 12;
+		u64 reserved_46                      : 1;
+		u64 reserved_47                      : 1;
+		u64 c_con                            : 1;
+		u64 p_con                            : 1;
+		u64 reserved_50_51                   : 2;
+		u64 child                            : 10;
+		u64 reserved_62                      : 1;
+		u64 reserved_63                      : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl2x_md_debug0_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL2X_MD_DEBUG0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_MD_DEBUG0(u64 a)
+{
+	return 0xec0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_md_debug1
+ *
+ * NIX AF Transmit Level 2 Meta Descriptor Debug 1 Registers Packet meta
+ * descriptor 0 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl2x_md_debug1 {
+	u64 u;
+	struct nixx_af_tl2x_md_debug1_s {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 reserved_23                      : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	struct nixx_af_tl2x_md_debug1_cn96xxp1 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 drain                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp1;
+	struct nixx_af_tl2x_md_debug1_cn96xxp3 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 reserved_19_22                   : 4;
+		u64 flush                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl2x_md_debug1_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL2X_MD_DEBUG1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_MD_DEBUG1(u64 a)
+{
+	return 0xec8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_md_debug2
+ *
+ * NIX AF Transmit Level 2 Meta Descriptor Debug 2 Registers Packet meta
+ * descriptor 1 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl2x_md_debug2 {
+	u64 u;
+	struct nixx_af_tl2x_md_debug2_s {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 reserved_23                      : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	struct nixx_af_tl2x_md_debug2_cn96xxp1 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 drain                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp1;
+	struct nixx_af_tl2x_md_debug2_cn96xxp3 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 reserved_19_22                   : 4;
+		u64 flush                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl2x_md_debug2_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL2X_MD_DEBUG2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_MD_DEBUG2(u64 a)
+{
+	return 0xed0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_md_debug3
+ *
+ * NIX AF Transmit Level 2 Meta Descriptor Debug 3 Registers Flush meta
+ * descriptor debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl2x_md_debug3 {
+	u64 u;
+	struct nixx_af_tl2x_md_debug3_s {
+		u64 reserved_0_36                    : 37;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	/* struct nixx_af_tl2x_md_debug3_s cn96xxp1; */
+	struct nixx_af_tl2x_md_debug3_cn96xxp3 {
+		u64 reserved_0_36                    : 37;
+		u64 reserved_37_38                   : 2;
+		u64 reserved_39_51                   : 13;
+		u64 reserved_52_61                   : 10;
+		u64 reserved_62                      : 1;
+		u64 reserved_63                      : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl2x_md_debug3_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL2X_MD_DEBUG3(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_MD_DEBUG3(u64 a)
+{
+	return 0xed8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_parent
+ *
+ * NIX AF Transmit Level 2 Parent Registers
+ */
+union nixx_af_tl2x_parent {
+	u64 u;
+	struct nixx_af_tl2x_parent_s {
+		u64 reserved_0_15                    : 16;
+		u64 parent                           : 5;
+		u64 reserved_21_63                   : 43;
+	} s;
+	/* struct nixx_af_tl2x_parent_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_PARENT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_PARENT(u64 a)
+{
+	return 0xe88 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_pir
+ *
+ * NIX AF Transmit Level 2 Peak Information Rate Registers This register
+ * has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl2x_pir {
+	u64 u;
+	struct nixx_af_tl2x_pir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl2x_pir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_PIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_PIR(u64 a)
+{
+	return 0xe30 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_pointers
+ *
+ * INTERNAL: NIX Transmit Level 2 Linked List Pointers Debug Register
+ */
+union nixx_af_tl2x_pointers {
+	u64 u;
+	struct nixx_af_tl2x_pointers_s {
+		u64 next                             : 8;
+		u64 reserved_8_15                    : 8;
+		u64 prev                             : 8;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_tl2x_pointers_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_POINTERS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_POINTERS(u64 a)
+{
+	return 0xe60 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_red
+ *
+ * INTERNAL: NIX Transmit Level 2 Red State Debug Register  This register
+ * has the same bit fields as NIX_AF_TL1()_RED.
+ */
+union nixx_af_tl2x_red {
+	u64 u;
+	struct nixx_af_tl2x_red_s {
+		u64 tail                             : 8;
+		u64 reserved_8_9                     : 2;
+		u64 head                             : 8;
+		u64 reserved_18_63                   : 46;
+	} s;
+	/* struct nixx_af_tl2x_red_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_RED(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_RED(u64 a)
+{
+	return 0xeb0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_sched_state
+ *
+ * NIX AF Transmit Level 2 Scheduling Control State Registers
+ */
+union nixx_af_tl2x_sched_state {
+	u64 u;
+	struct nixx_af_tl2x_sched_state_s {
+		u64 rr_count                         : 25;
+		u64 reserved_25_63                   : 39;
+	} s;
+	/* struct nixx_af_tl2x_sched_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SCHED_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SCHED_STATE(u64 a)
+{
+	return 0xe40 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_schedule
+ *
+ * NIX AF Transmit Level 2 Scheduling Control Registers
+ */
+union nixx_af_tl2x_schedule {
+	u64 u;
+	struct nixx_af_tl2x_schedule_s {
+		u64 rr_quantum                       : 24;
+		u64 prio                             : 4;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_tl2x_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SCHEDULE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SCHEDULE(u64 a)
+{
+	return 0xe00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_shape
+ *
+ * NIX AF Transmit Level 2 Shaping Control Registers
+ */
+union nixx_af_tl2x_shape {
+	u64 u;
+	struct nixx_af_tl2x_shape_s {
+		u64 adjust                           : 9;
+		u64 red_algo                         : 2;
+		u64 red_disable                      : 1;
+		u64 yellow_disable                   : 1;
+		u64 reserved_13_23                   : 11;
+		u64 length_disable                   : 1;
+		u64 schedule_list                    : 2;
+		u64 reserved_27_63                   : 37;
+	} s;
+	/* struct nixx_af_tl2x_shape_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SHAPE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SHAPE(u64 a)
+{
+	return 0xe10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_shape_state
+ *
+ * NIX AF Transmit Level 2 Shape State Registers This register must not
+ * be written during normal operation.
+ */
+union nixx_af_tl2x_shape_state {
+	u64 u;
+	struct nixx_af_tl2x_shape_state_s {
+		u64 cir_accum                        : 26;
+		u64 pir_accum                        : 26;
+		u64 color                            : 2;
+		u64 reserved_54_63                   : 10;
+	} s;
+	/* struct nixx_af_tl2x_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SHAPE_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SHAPE_STATE(u64 a)
+{
+	return 0xe50 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_sw_xoff
+ *
+ * NIX AF Transmit Level 2 Software Controlled XOFF Registers This
+ * register has the same bit fields as NIX_AF_TL1()_SW_XOFF.
+ */
+union nixx_af_tl2x_sw_xoff {
+	u64 u;
+	struct nixx_af_tl2x_sw_xoff_s {
+		u64 xoff                             : 1;
+		u64 drain                            : 1;
+		u64 reserved_2                       : 1;
+		u64 drain_irq                        : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct nixx_af_tl2x_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_SW_XOFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_SW_XOFF(u64 a)
+{
+	return 0xe70 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_topology
+ *
+ * NIX AF Transmit Level 2 Topology Registers
+ */
+union nixx_af_tl2x_topology {
+	u64 u;
+	struct nixx_af_tl2x_topology_s {
+		u64 reserved_0                       : 1;
+		u64 rr_prio                          : 4;
+		u64 reserved_5_31                    : 27;
+		u64 prio_anchor                      : 8;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct nixx_af_tl2x_topology_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_TOPOLOGY(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_TOPOLOGY(u64 a)
+{
+	return 0xe80 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2#_yellow
+ *
+ * INTERNAL: NIX Transmit Level 2 Yellow State Debug Register  This
+ * register has the same bit fields as NIX_AF_TL1()_YELLOW.
+ */
+union nixx_af_tl2x_yellow {
+	u64 u;
+	struct nixx_af_tl2x_yellow_s {
+		u64 tail                             : 8;
+		u64 reserved_8_9                     : 2;
+		u64 head                             : 8;
+		u64 reserved_18_63                   : 46;
+	} s;
+	/* struct nixx_af_tl2x_yellow_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2X_YELLOW(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2X_YELLOW(u64 a)
+{
+	return 0xea0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl2_const
+ *
+ * NIX AF Transmit Level 2 Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_tl2_const {
+	u64 u;
+	struct nixx_af_tl2_const_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_tl2_const_s cn; */
+};
+
+static inline u64 NIXX_AF_TL2_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL2_CONST(void)
+{
+	return 0x78;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_cir
+ *
+ * NIX AF Transmit Level 3 Committed Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl3x_cir {
+	u64 u;
+	struct nixx_af_tl3x_cir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl3x_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_CIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_CIR(u64 a)
+{
+	return 0x1020 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_green
+ *
+ * INTERNAL: NIX Transmit Level 3 Green State Debug Register
+ */
+union nixx_af_tl3x_green {
+	u64 u;
+	struct nixx_af_tl3x_green_s {
+		u64 tail                             : 9;
+		u64 reserved_9                       : 1;
+		u64 head                             : 9;
+		u64 reserved_19                      : 1;
+		u64 active_vec                       : 20;
+		u64 rr_active                        : 1;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl3x_green_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_GREEN(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_GREEN(u64 a)
+{
+	return 0x1090 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_md_debug0
+ *
+ * NIX AF Transmit Level 3 Meta Descriptor Debug 0 Registers See
+ * NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl3x_md_debug0 {
+	u64 u;
+	struct nixx_af_tl3x_md_debug0_s {
+		u64 pmd0_length                      : 16;
+		u64 pmd1_length                      : 16;
+		u64 pmd0_vld                         : 1;
+		u64 pmd1_vld                         : 1;
+		u64 reserved_34_45                   : 12;
+		u64 drain_pri                        : 1;
+		u64 drain                            : 1;
+		u64 c_con                            : 1;
+		u64 p_con                            : 1;
+		u64 reserved_50_51                   : 2;
+		u64 child                            : 10;
+		u64 reserved_62                      : 1;
+		u64 pmd_count                        : 1;
+	} s;
+	/* struct nixx_af_tl3x_md_debug0_s cn96xxp1; */
+	struct nixx_af_tl3x_md_debug0_cn96xxp3 {
+		u64 pmd0_length                      : 16;
+		u64 reserved_16_31                   : 16;
+		u64 pmd0_vld                         : 1;
+		u64 reserved_33                      : 1;
+		u64 reserved_34_45                   : 12;
+		u64 reserved_46                      : 1;
+		u64 reserved_47                      : 1;
+		u64 c_con                            : 1;
+		u64 p_con                            : 1;
+		u64 reserved_50_51                   : 2;
+		u64 child                            : 10;
+		u64 reserved_62                      : 1;
+		u64 reserved_63                      : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl3x_md_debug0_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL3X_MD_DEBUG0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_MD_DEBUG0(u64 a)
+{
+	return 0x10c0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_md_debug1
+ *
+ * NIX AF Transmit Level 3 Meta Descriptor Debug 1 Registers Packet meta
+ * descriptor 0 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl3x_md_debug1 {
+	u64 u;
+	struct nixx_af_tl3x_md_debug1_s {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 reserved_23                      : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	struct nixx_af_tl3x_md_debug1_cn96xxp1 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 drain                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp1;
+	struct nixx_af_tl3x_md_debug1_cn96xxp3 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 reserved_19_22                   : 4;
+		u64 flush                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl3x_md_debug1_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL3X_MD_DEBUG1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_MD_DEBUG1(u64 a)
+{
+	return 0x10c8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_md_debug2
+ *
+ * NIX AF Transmit Level 3 Meta Descriptor Debug 2 Registers Packet meta
+ * descriptor 1 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl3x_md_debug2 {
+	u64 u;
+	struct nixx_af_tl3x_md_debug2_s {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 reserved_23                      : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	struct nixx_af_tl3x_md_debug2_cn96xxp1 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 drain                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp1;
+	struct nixx_af_tl3x_md_debug2_cn96xxp3 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 reserved_19_22                   : 4;
+		u64 flush                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl3x_md_debug2_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL3X_MD_DEBUG2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_MD_DEBUG2(u64 a)
+{
+	return 0x10d0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_md_debug3
+ *
+ * NIX AF Transmit Level 3 Meta Descriptor Debug 3 Registers Flush meta
+ * descriptor debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl3x_md_debug3 {
+	u64 u;
+	struct nixx_af_tl3x_md_debug3_s {
+		u64 reserved_0_36                    : 37;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	/* struct nixx_af_tl3x_md_debug3_s cn96xxp1; */
+	struct nixx_af_tl3x_md_debug3_cn96xxp3 {
+		u64 reserved_0_36                    : 37;
+		u64 reserved_37_38                   : 2;
+		u64 reserved_39_51                   : 13;
+		u64 reserved_52_61                   : 10;
+		u64 reserved_62                      : 1;
+		u64 reserved_63                      : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl3x_md_debug3_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL3X_MD_DEBUG3(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_MD_DEBUG3(u64 a)
+{
+	return 0x10d8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_parent
+ *
+ * NIX AF Transmit Level 3 Parent Registers
+ */
+union nixx_af_tl3x_parent {
+	u64 u;
+	struct nixx_af_tl3x_parent_s {
+		u64 reserved_0_15                    : 16;
+		u64 parent                           : 8;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_tl3x_parent_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_PARENT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_PARENT(u64 a)
+{
+	return 0x1088 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_pir
+ *
+ * NIX AF Transmit Level 3 Peak Information Rate Registers This register
+ * has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl3x_pir {
+	u64 u;
+	struct nixx_af_tl3x_pir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl3x_pir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_PIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_PIR(u64 a)
+{
+	return 0x1030 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_pointers
+ *
+ * INTERNAL: NIX Transmit Level 3 Linked List Pointers Debug Register
+ * This register has the same bit fields as NIX_AF_TL2()_POINTERS.
+ */
+union nixx_af_tl3x_pointers {
+	u64 u;
+	struct nixx_af_tl3x_pointers_s {
+		u64 next                             : 8;
+		u64 reserved_8_15                    : 8;
+		u64 prev                             : 8;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_tl3x_pointers_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_POINTERS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_POINTERS(u64 a)
+{
+	return 0x1060 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_red
+ *
+ * INTERNAL: NIX Transmit Level 3 Red State Debug Register  This register
+ * has the same bit fields as NIX_AF_TL3()_YELLOW.
+ */
+union nixx_af_tl3x_red {
+	u64 u;
+	struct nixx_af_tl3x_red_s {
+		u64 tail                             : 9;
+		u64 reserved_9                       : 1;
+		u64 head                             : 9;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct nixx_af_tl3x_red_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_RED(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_RED(u64 a)
+{
+	return 0x10b0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_sched_state
+ *
+ * NIX AF Transmit Level 3 Scheduling Control State Registers This
+ * register has the same bit fields as NIX_AF_TL2()_SCHED_STATE.
+ */
+union nixx_af_tl3x_sched_state {
+	u64 u;
+	struct nixx_af_tl3x_sched_state_s {
+		u64 rr_count                         : 25;
+		u64 reserved_25_63                   : 39;
+	} s;
+	/* struct nixx_af_tl3x_sched_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SCHED_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SCHED_STATE(u64 a)
+{
+	return 0x1040 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_schedule
+ *
+ * NIX AF Transmit Level 3 Scheduling Control Registers This register has
+ * the same bit fields as NIX_AF_TL2()_SCHEDULE.
+ */
+union nixx_af_tl3x_schedule {
+	u64 u;
+	struct nixx_af_tl3x_schedule_s {
+		u64 rr_quantum                       : 24;
+		u64 prio                             : 4;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_tl3x_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SCHEDULE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SCHEDULE(u64 a)
+{
+	return 0x1000 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_shape
+ *
+ * NIX AF Transmit Level 3 Shaping Control Registers
+ */
+union nixx_af_tl3x_shape {
+	u64 u;
+	struct nixx_af_tl3x_shape_s {
+		u64 adjust                           : 9;
+		u64 red_algo                         : 2;
+		u64 red_disable                      : 1;
+		u64 yellow_disable                   : 1;
+		u64 reserved_13_23                   : 11;
+		u64 length_disable                   : 1;
+		u64 schedule_list                    : 2;
+		u64 reserved_27_63                   : 37;
+	} s;
+	/* struct nixx_af_tl3x_shape_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SHAPE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SHAPE(u64 a)
+{
+	return 0x1010 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_shape_state
+ *
+ * NIX AF Transmit Level 3 Shaping State Registers This register has the
+ * same bit fields as NIX_AF_TL2()_SHAPE_STATE. This register must not be
+ * written during normal operation.
+ */
+union nixx_af_tl3x_shape_state {
+	u64 u;
+	struct nixx_af_tl3x_shape_state_s {
+		u64 cir_accum                        : 26;
+		u64 pir_accum                        : 26;
+		u64 color                            : 2;
+		u64 reserved_54_63                   : 10;
+	} s;
+	/* struct nixx_af_tl3x_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SHAPE_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SHAPE_STATE(u64 a)
+{
+	return 0x1050 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_sw_xoff
+ *
+ * NIX AF Transmit Level 3 Software Controlled XOFF Registers This
+ * register has the same bit fields as NIX_AF_TL1()_SW_XOFF
+ */
+union nixx_af_tl3x_sw_xoff {
+	u64 u;
+	struct nixx_af_tl3x_sw_xoff_s {
+		u64 xoff                             : 1;
+		u64 drain                            : 1;
+		u64 reserved_2                       : 1;
+		u64 drain_irq                        : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct nixx_af_tl3x_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_SW_XOFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_SW_XOFF(u64 a)
+{
+	return 0x1070 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_topology
+ *
+ * NIX AF Transmit Level 3 Topology Registers
+ */
+union nixx_af_tl3x_topology {
+	u64 u;
+	struct nixx_af_tl3x_topology_s {
+		u64 reserved_0                       : 1;
+		u64 rr_prio                          : 4;
+		u64 reserved_5_31                    : 27;
+		u64 prio_anchor                      : 9;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl3x_topology_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_TOPOLOGY(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_TOPOLOGY(u64 a)
+{
+	return 0x1080 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3#_yellow
+ *
+ * INTERNAL: NIX Transmit Level 3 Yellow State Debug Register
+ */
+union nixx_af_tl3x_yellow {
+	u64 u;
+	struct nixx_af_tl3x_yellow_s {
+		u64 tail                             : 9;
+		u64 reserved_9                       : 1;
+		u64 head                             : 9;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct nixx_af_tl3x_yellow_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3X_YELLOW(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3X_YELLOW(u64 a)
+{
+	return 0x10a0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3_const
+ *
+ * NIX AF Transmit Level 3 Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_tl3_const {
+	u64 u;
+	struct nixx_af_tl3_const_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_tl3_const_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3_CONST(void)
+{
+	return 0x80;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3_tl2#_bp_status
+ *
+ * NIX AF Transmit Level 3/2 Backpressure Status Registers
+ */
+union nixx_af_tl3_tl2x_bp_status {
+	u64 u;
+	struct nixx_af_tl3_tl2x_bp_status_s {
+		u64 hw_xoff                          : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_tl3_tl2x_bp_status_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3_TL2X_BP_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3_TL2X_BP_STATUS(u64 a)
+{
+	return 0x1610 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3_tl2#_cfg
+ *
+ * NIX AF Transmit Level 3/2 Configuration Registers
+ */
+union nixx_af_tl3_tl2x_cfg {
+	u64 u;
+	struct nixx_af_tl3_tl2x_cfg_s {
+		u64 express                          : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_tl3_tl2x_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3_TL2X_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3_TL2X_CFG(u64 a)
+{
+	return 0x1600 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl3_tl2#_link#_cfg
+ *
+ * NIX AF Transmit Level 3/2 Link Configuration Registers These registers
+ * specify the links and associated channels that a given TL3 or TL2
+ * queue (depending on NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]) can transmit
+ * on. Each TL3/TL2 queue can be enabled to transmit on and be
+ * backpressured by one or more links and associated channels. The last
+ * index (LINK) is enumerated by NIX_LINK_E.
+ */
+union nixx_af_tl3_tl2x_linkx_cfg {
+	u64 u;
+	struct nixx_af_tl3_tl2x_linkx_cfg_s {
+		u64 relchan                          : 8;
+		u64 reserved_8_11                    : 4;
+		u64 ena                              : 1;
+		u64 bp_ena                           : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct nixx_af_tl3_tl2x_linkx_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_TL3_TL2X_LINKX_CFG(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL3_TL2X_LINKX_CFG(u64 a, u64 b)
+{
+	return 0x1700 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_bp_status
+ *
+ * NIX AF Transmit Level 4 Backpressure Status Registers
+ */
+union nixx_af_tl4x_bp_status {
+	u64 u;
+	struct nixx_af_tl4x_bp_status_s {
+		u64 hw_xoff                          : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_tl4x_bp_status_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_BP_STATUS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_BP_STATUS(u64 a)
+{
+	return 0xb00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_cir
+ *
+ * NIX AF Transmit Level 4 Committed Information Rate Registers This
+ * register has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl4x_cir {
+	u64 u;
+	struct nixx_af_tl4x_cir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl4x_cir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_CIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_CIR(u64 a)
+{
+	return 0x1220 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_green
+ *
+ * INTERNAL: NIX Transmit Level 4 Green State Debug Register  This
+ * register has the same bit fields as NIX_AF_TL3()_GREEN.
+ */
+union nixx_af_tl4x_green {
+	u64 u;
+	struct nixx_af_tl4x_green_s {
+		u64 tail                             : 9;
+		u64 reserved_9                       : 1;
+		u64 head                             : 9;
+		u64 reserved_19                      : 1;
+		u64 active_vec                       : 20;
+		u64 rr_active                        : 1;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl4x_green_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_GREEN(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_GREEN(u64 a)
+{
+	return 0x1290 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_md_debug0
+ *
+ * NIX AF Transmit Level 4 Meta Descriptor Debug 0 Registers See
+ * NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl4x_md_debug0 {
+	u64 u;
+	struct nixx_af_tl4x_md_debug0_s {
+		u64 pmd0_length                      : 16;
+		u64 pmd1_length                      : 16;
+		u64 pmd0_vld                         : 1;
+		u64 pmd1_vld                         : 1;
+		u64 reserved_34_45                   : 12;
+		u64 drain_pri                        : 1;
+		u64 drain                            : 1;
+		u64 c_con                            : 1;
+		u64 p_con                            : 1;
+		u64 reserved_50_51                   : 2;
+		u64 child                            : 10;
+		u64 reserved_62                      : 1;
+		u64 pmd_count                        : 1;
+	} s;
+	/* struct nixx_af_tl4x_md_debug0_s cn96xxp1; */
+	struct nixx_af_tl4x_md_debug0_cn96xxp3 {
+		u64 pmd0_length                      : 16;
+		u64 reserved_16_31                   : 16;
+		u64 pmd0_vld                         : 1;
+		u64 reserved_33                      : 1;
+		u64 reserved_34_45                   : 12;
+		u64 reserved_46                      : 1;
+		u64 reserved_47                      : 1;
+		u64 c_con                            : 1;
+		u64 p_con                            : 1;
+		u64 reserved_50_51                   : 2;
+		u64 child                            : 10;
+		u64 reserved_62                      : 1;
+		u64 reserved_63                      : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl4x_md_debug0_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL4X_MD_DEBUG0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_MD_DEBUG0(u64 a)
+{
+	return 0x12c0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_md_debug1
+ *
+ * NIX AF Transmit Level 4 Meta Descriptor Debug 1 Registers Packet meta
+ * descriptor 0 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl4x_md_debug1 {
+	u64 u;
+	struct nixx_af_tl4x_md_debug1_s {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 reserved_23                      : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	struct nixx_af_tl4x_md_debug1_cn96xxp1 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 drain                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp1;
+	struct nixx_af_tl4x_md_debug1_cn96xxp3 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 reserved_19_22                   : 4;
+		u64 flush                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl4x_md_debug1_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL4X_MD_DEBUG1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_MD_DEBUG1(u64 a)
+{
+	return 0x12c8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_md_debug2
+ *
+ * NIX AF Transmit Level 4 Meta Descriptor Debug 2 Registers Packet meta
+ * descriptor 1 debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl4x_md_debug2 {
+	u64 u;
+	struct nixx_af_tl4x_md_debug2_s {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 reserved_23                      : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	struct nixx_af_tl4x_md_debug2_cn96xxp1 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 uid                              : 4;
+		u64 drain                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp1;
+	struct nixx_af_tl4x_md_debug2_cn96xxp3 {
+		u64 reserved_0_5                     : 6;
+		u64 red_algo_override                : 2;
+		u64 cir_dis                          : 1;
+		u64 pir_dis                          : 1;
+		u64 adjust                           : 9;
+		u64 reserved_19_22                   : 4;
+		u64 flush                            : 1;
+		u64 bubble                           : 1;
+		u64 color                            : 2;
+		u64 pse_pkt_id                       : 9;
+		u64 reserved_36                      : 1;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl4x_md_debug2_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL4X_MD_DEBUG2(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_MD_DEBUG2(u64 a)
+{
+	return 0x12d0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_md_debug3
+ *
+ * NIX AF Transmit Level 4 Meta Descriptor Debug 3 Registers Flush meta
+ * descriptor debug. See NIX_AF_TL1()_MD_DEBUG0.
+ */
+union nixx_af_tl4x_md_debug3 {
+	u64 u;
+	struct nixx_af_tl4x_md_debug3_s {
+		u64 reserved_0_36                    : 37;
+		u64 tx_pkt_p2x                       : 2;
+		u64 sqm_pkt_id                       : 13;
+		u64 mdq_idx                          : 10;
+		u64 reserved_62                      : 1;
+		u64 vld                              : 1;
+	} s;
+	/* struct nixx_af_tl4x_md_debug3_s cn96xxp1; */
+	struct nixx_af_tl4x_md_debug3_cn96xxp3 {
+		u64 reserved_0_36                    : 37;
+		u64 reserved_37_38                   : 2;
+		u64 reserved_39_51                   : 13;
+		u64 reserved_52_61                   : 10;
+		u64 reserved_62                      : 1;
+		u64 reserved_63                      : 1;
+	} cn96xxp3;
+	/* struct nixx_af_tl4x_md_debug3_s cnf95xx; */
+};
+
+static inline u64 NIXX_AF_TL4X_MD_DEBUG3(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_MD_DEBUG3(u64 a)
+{
+	return 0x12d8 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_parent
+ *
+ * NIX AF Transmit Level 4 Parent Registers
+ */
+union nixx_af_tl4x_parent {
+	u64 u;
+	struct nixx_af_tl4x_parent_s {
+		u64 reserved_0_15                    : 16;
+		u64 parent                           : 8;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_tl4x_parent_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_PARENT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_PARENT(u64 a)
+{
+	return 0x1288 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_pir
+ *
+ * NIX AF Transmit Level 4 Peak Information Rate Registers This register
+ * has the same bit fields as NIX_AF_TL1()_CIR.
+ */
+union nixx_af_tl4x_pir {
+	u64 u;
+	struct nixx_af_tl4x_pir_s {
+		u64 enable                           : 1;
+		u64 rate_mantissa                    : 8;
+		u64 rate_exponent                    : 4;
+		u64 rate_divider_exponent            : 4;
+		u64 reserved_17_28                   : 12;
+		u64 burst_mantissa                   : 8;
+		u64 burst_exponent                   : 4;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl4x_pir_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_PIR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_PIR(u64 a)
+{
+	return 0x1230 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_pointers
+ *
+ * INTERNAL: NIX Transmit Level 4 Linked List Pointers Debug Register
+ * This register has the same bit fields as NIX_AF_TL2()_POINTERS.
+ */
+union nixx_af_tl4x_pointers {
+	u64 u;
+	struct nixx_af_tl4x_pointers_s {
+		u64 next                             : 9;
+		u64 reserved_9_15                    : 7;
+		u64 prev                             : 9;
+		u64 reserved_25_63                   : 39;
+	} s;
+	/* struct nixx_af_tl4x_pointers_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_POINTERS(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_POINTERS(u64 a)
+{
+	return 0x1260 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_red
+ *
+ * INTERNAL: NIX Transmit Level 4 Red State Debug Register  This register
+ * has the same bit fields as NIX_AF_TL3()_YELLOW.
+ */
+union nixx_af_tl4x_red {
+	u64 u;
+	struct nixx_af_tl4x_red_s {
+		u64 tail                             : 9;
+		u64 reserved_9                       : 1;
+		u64 head                             : 9;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct nixx_af_tl4x_red_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_RED(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_RED(u64 a)
+{
+	return 0x12b0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_sched_state
+ *
+ * NIX AF Transmit Level 4 Scheduling Control State Registers This
+ * register has the same bit fields as NIX_AF_TL2()_SCHED_STATE.
+ */
+union nixx_af_tl4x_sched_state {
+	u64 u;
+	struct nixx_af_tl4x_sched_state_s {
+		u64 rr_count                         : 25;
+		u64 reserved_25_63                   : 39;
+	} s;
+	/* struct nixx_af_tl4x_sched_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SCHED_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SCHED_STATE(u64 a)
+{
+	return 0x1240 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_schedule
+ *
+ * NIX AF Transmit Level 4 Scheduling Control Registers This register has
+ * the same bit fields as NIX_AF_TL2()_SCHEDULE.
+ */
+union nixx_af_tl4x_schedule {
+	u64 u;
+	struct nixx_af_tl4x_schedule_s {
+		u64 rr_quantum                       : 24;
+		u64 prio                             : 4;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct nixx_af_tl4x_schedule_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SCHEDULE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SCHEDULE(u64 a)
+{
+	return 0x1200 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_sdp_link_cfg
+ *
+ * NIX AF Transmit Level 4 Link Configuration Registers These registers
+ * specify which TL4 queues transmit to and are optionally backpressured
+ * by SDP.
+ */
+union nixx_af_tl4x_sdp_link_cfg {
+	u64 u;
+	struct nixx_af_tl4x_sdp_link_cfg_s {
+		u64 relchan                          : 8;
+		u64 reserved_8_11                    : 4;
+		u64 ena                              : 1;
+		u64 bp_ena                           : 1;
+		u64 reserved_14_63                   : 50;
+	} s;
+	/* struct nixx_af_tl4x_sdp_link_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SDP_LINK_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SDP_LINK_CFG(u64 a)
+{
+	return 0xb10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_shape
+ *
+ * NIX AF Transmit Level 4 Shaping Control Registers This register has
+ * the same bit fields as NIX_AF_TL2()_SHAPE.
+ */
+union nixx_af_tl4x_shape {
+	u64 u;
+	struct nixx_af_tl4x_shape_s {
+		u64 adjust                           : 9;
+		u64 red_algo                         : 2;
+		u64 red_disable                      : 1;
+		u64 yellow_disable                   : 1;
+		u64 reserved_13_23                   : 11;
+		u64 length_disable                   : 1;
+		u64 schedule_list                    : 2;
+		u64 reserved_27_63                   : 37;
+	} s;
+	/* struct nixx_af_tl4x_shape_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SHAPE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SHAPE(u64 a)
+{
+	return 0x1210 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_shape_state
+ *
+ * NIX AF Transmit Level 4 Shaping State Registers This register has the
+ * same bit fields as NIX_AF_TL2()_SHAPE_STATE. This register must not be
+ * written during normal operation.
+ */
+union nixx_af_tl4x_shape_state {
+	u64 u;
+	struct nixx_af_tl4x_shape_state_s {
+		u64 cir_accum                        : 26;
+		u64 pir_accum                        : 26;
+		u64 color                            : 2;
+		u64 reserved_54_63                   : 10;
+	} s;
+	/* struct nixx_af_tl4x_shape_state_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SHAPE_STATE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SHAPE_STATE(u64 a)
+{
+	return 0x1250 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_sw_xoff
+ *
+ * NIX AF Transmit Level 4 Software Controlled XOFF Registers This
+ * register has the same bit fields as NIX_AF_TL1()_SW_XOFF
+ */
+union nixx_af_tl4x_sw_xoff {
+	u64 u;
+	struct nixx_af_tl4x_sw_xoff_s {
+		u64 xoff                             : 1;
+		u64 drain                            : 1;
+		u64 reserved_2                       : 1;
+		u64 drain_irq                        : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct nixx_af_tl4x_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_SW_XOFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_SW_XOFF(u64 a)
+{
+	return 0x1270 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_topology
+ *
+ * NIX AF Transmit Level 4 Topology Registers
+ */
+union nixx_af_tl4x_topology {
+	u64 u;
+	struct nixx_af_tl4x_topology_s {
+		u64 reserved_0                       : 1;
+		u64 rr_prio                          : 4;
+		u64 reserved_5_31                    : 27;
+		u64 prio_anchor                      : 9;
+		u64 reserved_41_63                   : 23;
+	} s;
+	/* struct nixx_af_tl4x_topology_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_TOPOLOGY(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_TOPOLOGY(u64 a)
+{
+	return 0x1280 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4#_yellow
+ *
+ * INTERNAL: NIX Transmit Level 4 Yellow State Debug Register  This
+ * register has the same bit fields as NIX_AF_TL3()_YELLOW
+ */
+union nixx_af_tl4x_yellow {
+	u64 u;
+	struct nixx_af_tl4x_yellow_s {
+		u64 tail                             : 9;
+		u64 reserved_9                       : 1;
+		u64 head                             : 9;
+		u64 reserved_19_63                   : 45;
+	} s;
+	/* struct nixx_af_tl4x_yellow_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4X_YELLOW(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4X_YELLOW(u64 a)
+{
+	return 0x12a0 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tl4_const
+ *
+ * NIX AF Transmit Level 4 Constants Register This register contains
+ * constants for software discovery.
+ */
+union nixx_af_tl4_const {
+	u64 u;
+	struct nixx_af_tl4_const_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct nixx_af_tl4_const_s cn; */
+};
+
+static inline u64 NIXX_AF_TL4_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TL4_CONST(void)
+{
+	return 0x88;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_link#_expr_credit
+ *
+ * INTERNAL: NIX AF Transmit Link Express Credit Registers  Internal:
+ * 802.3br frame preemption/express path is defeatured. Old definition:
+ * These registers track credits per link for express packets that may
+ * potentially preempt normal packets. Link index enumerated by
+ * NIX_LINK_E.
+ */
+union nixx_af_tx_linkx_expr_credit {
+	u64 u;
+	struct nixx_af_tx_linkx_expr_credit_s {
+		u64 reserved_0                       : 1;
+		u64 cc_enable                        : 1;
+		u64 cc_packet_cnt                    : 10;
+		u64 cc_unit_cnt                      : 20;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct nixx_af_tx_linkx_expr_credit_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_LINKX_EXPR_CREDIT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_LINKX_EXPR_CREDIT(u64 a)
+{
+	return 0xa10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_link#_hw_xoff
+ *
+ * NIX AF Transmit Link Hardware Controlled XOFF Registers Link index
+ * enumerated by NIX_LINK_E.
+ */
+union nixx_af_tx_linkx_hw_xoff {
+	u64 u;
+	struct nixx_af_tx_linkx_hw_xoff_s {
+		u64 chan_xoff                        : 64;
+	} s;
+	/* struct nixx_af_tx_linkx_hw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_LINKX_HW_XOFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_LINKX_HW_XOFF(u64 a)
+{
+	return 0xa30 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_link#_norm_credit
+ *
+ * NIX AF Transmit Link Normal Credit Registers These registers track
+ * credits per link for normal packets sent to CGX and LBK. Link index
+ * enumerated by NIX_LINK_E.
+ */
+union nixx_af_tx_linkx_norm_credit {
+	u64 u;
+	struct nixx_af_tx_linkx_norm_credit_s {
+		u64 reserved_0                       : 1;
+		u64 cc_enable                        : 1;
+		u64 cc_packet_cnt                    : 10;
+		u64 cc_unit_cnt                      : 20;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct nixx_af_tx_linkx_norm_credit_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_LINKX_NORM_CREDIT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_LINKX_NORM_CREDIT(u64 a)
+{
+	return 0xa00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_link#_sw_xoff
+ *
+ * INTERNAL: NIX AF Transmit Link Software Controlled XOFF Registers
+ * Link index enumerated by NIX_LINK_E. Internal: Defeatured registers.
+ * Software should instead use NIX_AF_TL3()_SW_XOFF registers when
+ * NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] is set and NIX_AF_TL2()_SW_XOFF
+ * registers when NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] is clear.
+ */
+union nixx_af_tx_linkx_sw_xoff {
+	u64 u;
+	struct nixx_af_tx_linkx_sw_xoff_s {
+		u64 chan_xoff                        : 64;
+	} s;
+	/* struct nixx_af_tx_linkx_sw_xoff_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_LINKX_SW_XOFF(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_LINKX_SW_XOFF(u64 a)
+{
+	return 0xa20 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_mcast#
+ *
+ * NIX AF Transmit Multicast Registers These registers access transmit
+ * multicast table entries used to specify multicast replication lists.
+ * Each list consists of linked entries with [EOL] = 1 in the last entry.
+ * A transmit packet is multicast when the action returned by NPC has
+ * NIX_TX_ACTION_S[OP] = NIX_TX_ACTIONOP_E::MCAST. NIX_TX_ACTION_S[INDEX]
+ * points to the start of the multicast replication list, and [EOL] = 1
+ * indicates the end of list.
+ */
+union nixx_af_tx_mcastx {
+	u64 u;
+	struct nixx_af_tx_mcastx_s {
+		u64 channel                          : 12;
+		u64 eol                              : 1;
+		u64 reserved_13_15                   : 3;
+		u64 next                             : 16;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct nixx_af_tx_mcastx_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_MCASTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_MCASTX(u64 a)
+{
+	return 0x1900 + 0x8000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_npc_capture_config
+ *
+ * NIX AF Transmit NPC Response Capture Configuration Register Configures
+ * the NPC response capture logic for transmit packets. When enabled,
+ * allows NPC responses for selected packets to be captured in
+ * NIX_AF_TX_NPC_CAPTURE_INFO and NIX_AF_TX_NPC_CAPTURE_RESP().
+ */
+union nixx_af_tx_npc_capture_config {
+	u64 u;
+	struct nixx_af_tx_npc_capture_config_s {
+		u64 en                               : 1;
+		u64 continuous                       : 1;
+		u64 lso_segnum_en                    : 1;
+		u64 sqe_id_en                        : 1;
+		u64 sq_id_en                         : 1;
+		u64 lf_id_en                         : 1;
+		u64 reserved_6_11                    : 6;
+		u64 lso_segnum                       : 8;
+		u64 sqe_id                           : 16;
+		u64 sq_id                            : 20;
+		u64 lf_id                            : 8;
+	} s;
+	/* struct nixx_af_tx_npc_capture_config_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_CONFIG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_CONFIG(void)
+{
+	return 0x660;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_npc_capture_info
+ *
+ * NIX AF Transmit NPC Response Capture Information Register This
+ * register contains captured NPC response information for a transmit
+ * packet. See NIX_AF_TX_NPC_CAPTURE_CONFIG.
+ */
+union nixx_af_tx_npc_capture_info {
+	u64 u;
+	struct nixx_af_tx_npc_capture_info_s {
+		u64 vld                              : 1;
+		u64 reserved_1_11                    : 11;
+		u64 lso_segnum                       : 8;
+		u64 sqe_id                           : 16;
+		u64 sq_id                            : 20;
+		u64 lf_id                            : 8;
+	} s;
+	/* struct nixx_af_tx_npc_capture_info_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_INFO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_INFO(void)
+{
+	return 0x668;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_npc_capture_resp#
+ *
+ * NIX AF Transmit NPC Capture Response Registers These registers contain
+ * the captured NPC response for a transmit packet when
+ * NIX_AF_TX_NPC_CAPTURE_INFO[VLD] is set. See also
+ * NIX_AF_TX_NPC_CAPTURE_CONFIG.
+ */
+union nixx_af_tx_npc_capture_respx {
+	u64 u;
+	struct nixx_af_tx_npc_capture_respx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct nixx_af_tx_npc_capture_respx_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_RESPX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_NPC_CAPTURE_RESPX(u64 a)
+{
+	return 0x680 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_tstmp_cfg
+ *
+ * NIX AF Transmit Timestamp Configuration Register
+ */
+union nixx_af_tx_tstmp_cfg {
+	u64 u;
+	struct nixx_af_tx_tstmp_cfg_s {
+		u64 tstmp_wd_period                  : 4;
+		u64 reserved_4_7                     : 4;
+		u64 express                          : 16;
+		u64 reserved_24_63                   : 40;
+	} s;
+	/* struct nixx_af_tx_tstmp_cfg_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_TSTMP_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_TSTMP_CFG(void)
+{
+	return 0xc0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_vtag_def#_ctl
+ *
+ * NIX AF Transmit Vtag Definition Control Registers The transmit Vtag
+ * definition table specifies Vtag layers (e.g. VLAN, E-TAG) to
+ * optionally insert or replace in the TX packet header. Indexed by
+ * NIX_TX_VTAG_ACTION_S[VTAG*_DEF].
+ */
+union nixx_af_tx_vtag_defx_ctl {
+	u64 u;
+	struct nixx_af_tx_vtag_defx_ctl_s {
+		u64 size                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_af_tx_vtag_defx_ctl_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_VTAG_DEFX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_VTAG_DEFX_CTL(u64 a)
+{
+	return 0x1a00 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_af_tx_vtag_def#_data
+ *
+ * NIX AF Transmit Vtag Definition Data Registers See
+ * NIX_AF_TX_VTAG_DEF()_CTL.
+ */
+union nixx_af_tx_vtag_defx_data {
+	u64 u;
+	struct nixx_af_tx_vtag_defx_data_s {
+		u64 data                             : 64;
+	} s;
+	/* struct nixx_af_tx_vtag_defx_data_s cn; */
+};
+
+static inline u64 NIXX_AF_TX_VTAG_DEFX_DATA(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_AF_TX_VTAG_DEFX_DATA(u64 a)
+{
+	return 0x1a10 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cfg
+ *
+ * NIX LF Configuration Register
+ */
+union nixx_lf_cfg {
+	u64 u;
+	struct nixx_lf_cfg_s {
+		u64 tcp_timer_int_ena                : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_cfg_s cn; */
+};
+
+static inline u64 NIXX_LF_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CFG(void)
+{
+	return 0x100;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_cnt
+ *
+ * NIX LF Completion Interrupt Count Registers
+ */
+union nixx_lf_cintx_cnt {
+	u64 u;
+	struct nixx_lf_cintx_cnt_s {
+		u64 ecount                           : 32;
+		u64 qcount                           : 16;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_lf_cintx_cnt_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_CNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_CNT(u64 a)
+{
+	return 0xd00 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_ena_w1c
+ *
+ * NIX LF Completion Interrupt Enable Clear Registers This register
+ * clears interrupt enable bits.
+ */
+union nixx_lf_cintx_ena_w1c {
+	u64 u;
+	struct nixx_lf_cintx_ena_w1c_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_cintx_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_ENA_W1C(u64 a)
+{
+	return 0xd50 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_ena_w1s
+ *
+ * NIX LF Completion Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union nixx_lf_cintx_ena_w1s {
+	u64 u;
+	struct nixx_lf_cintx_ena_w1s_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_cintx_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_ENA_W1S(u64 a)
+{
+	return 0xd40 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_int
+ *
+ * NIX LF Completion Interrupt Registers
+ */
+union nixx_lf_cintx_int {
+	u64 u;
+	struct nixx_lf_cintx_int_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_cintx_int_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_INT(u64 a)
+{
+	return 0xd20 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_int_w1s
+ *
+ * NIX LF Completion Interrupt Set Registers This register sets interrupt
+ * bits.
+ */
+union nixx_lf_cintx_int_w1s {
+	u64 u;
+	struct nixx_lf_cintx_int_w1s_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_cintx_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_INT_W1S(u64 a)
+{
+	return 0xd30 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cint#_wait
+ *
+ * NIX LF Completion Interrupt Count Registers
+ */
+union nixx_lf_cintx_wait {
+	u64 u;
+	struct nixx_lf_cintx_wait_s {
+		u64 ecount_wait                      : 32;
+		u64 qcount_wait                      : 16;
+		u64 time_wait                        : 8;
+		u64 reserved_56_63                   : 8;
+	} s;
+	/* struct nixx_lf_cintx_wait_s cn; */
+};
+
+static inline u64 NIXX_LF_CINTX_WAIT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CINTX_WAIT(u64 a)
+{
+	return 0xd10 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cq_op_door
+ *
+ * NIX LF CQ Doorbell Operation Register A write to this register
+ * dequeues CQEs from a CQ ring within the LF. A read is RAZ.  RSL
+ * accesses to this register are RAZ/WI.
+ */
+union nixx_lf_cq_op_door {
+	u64 u;
+	struct nixx_lf_cq_op_door_s {
+		u64 count                            : 16;
+		u64 reserved_16_31                   : 16;
+		u64 cq                               : 20;
+		u64 reserved_52_63                   : 12;
+	} s;
+	/* struct nixx_lf_cq_op_door_s cn; */
+};
+
+static inline u64 NIXX_LF_CQ_OP_DOOR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CQ_OP_DOOR(void)
+{
+	return 0xb30;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cq_op_int
+ *
+ * NIX LF Completion Queue Interrupt Operation Register A 64-bit atomic
+ * load-and-add to this register reads CQ interrupts and interrupt
+ * enables. A write optionally sets or clears interrupts and interrupt
+ * enables. A read is RAZ.  RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_cq_op_int {
+	u64 u;
+	struct nixx_lf_cq_op_int_s {
+		u64 cq_err_int                       : 8;
+		u64 cq_err_int_ena                   : 8;
+		u64 reserved_16_41                   : 26;
+		u64 op_err                           : 1;
+		u64 setop                            : 1;
+		u64 cq                               : 20;
+	} s;
+	/* struct nixx_lf_cq_op_int_s cn; */
+};
+
+static inline u64 NIXX_LF_CQ_OP_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CQ_OP_INT(void)
+{
+	return 0xb00;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_cq_op_status
+ *
+ * NIX LF Completion Queue Status Operation Register A 64-bit atomic
+ * load-and-add to this register reads NIX_CQ_CTX_S[HEAD,TAIL]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the CQ
+ * within LF.  All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI.  RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_cq_op_status {
+	u64 u;
+	struct nixx_lf_cq_op_status_s {
+		u64 tail                             : 20;
+		u64 head                             : 20;
+		u64 reserved_40_45                   : 6;
+		u64 cq_err                           : 1;
+		u64 reserved_47_62                   : 16;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_cq_op_status_s cn; */
+};
+
+static inline u64 NIXX_LF_CQ_OP_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_CQ_OP_STATUS(void)
+{
+	return 0xb40;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_err_int
+ *
+ * NIX LF Error Interrupt Register
+ */
+union nixx_lf_err_int {
+	u64 u;
+	struct nixx_lf_err_int_s {
+		u64 sqb_fault                        : 1;
+		u64 sq_ctx_fault                     : 1;
+		u64 rq_ctx_fault                     : 1;
+		u64 cq_ctx_fault                     : 1;
+		u64 reserved_4                       : 1;
+		u64 rsse_fault                       : 1;
+		u64 ipsec_dyno_fault                 : 1;
+		u64 sq_disabled                      : 1;
+		u64 sq_oor                           : 1;
+		u64 send_jump_fault                  : 1;
+		u64 send_sg_fault                    : 1;
+		u64 rq_disabled                      : 1;
+		u64 rq_oor                           : 1;
+		u64 rx_wqe_fault                     : 1;
+		u64 rss_err                          : 1;
+		u64 reserved_15_19                   : 5;
+		u64 dyno_err                         : 1;
+		u64 reserved_21_23                   : 3;
+		u64 cq_disabled                      : 1;
+		u64 cq_oor                           : 1;
+		u64 reserved_26_27                   : 2;
+		u64 qint_fault                       : 1;
+		u64 cint_fault                       : 1;
+		u64 reserved_30_63                   : 34;
+	} s;
+	/* struct nixx_lf_err_int_s cn; */
+};
+
+static inline u64 NIXX_LF_ERR_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_ERR_INT(void)
+{
+	return 0x220;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_err_int_ena_w1c
+ *
+ * NIX LF Error Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_lf_err_int_ena_w1c {
+	u64 u;
+	struct nixx_lf_err_int_ena_w1c_s {
+		u64 sqb_fault                        : 1;
+		u64 sq_ctx_fault                     : 1;
+		u64 rq_ctx_fault                     : 1;
+		u64 cq_ctx_fault                     : 1;
+		u64 reserved_4                       : 1;
+		u64 rsse_fault                       : 1;
+		u64 ipsec_dyno_fault                 : 1;
+		u64 sq_disabled                      : 1;
+		u64 sq_oor                           : 1;
+		u64 send_jump_fault                  : 1;
+		u64 send_sg_fault                    : 1;
+		u64 rq_disabled                      : 1;
+		u64 rq_oor                           : 1;
+		u64 rx_wqe_fault                     : 1;
+		u64 rss_err                          : 1;
+		u64 reserved_15_19                   : 5;
+		u64 dyno_err                         : 1;
+		u64 reserved_21_23                   : 3;
+		u64 cq_disabled                      : 1;
+		u64 cq_oor                           : 1;
+		u64 reserved_26_27                   : 2;
+		u64 qint_fault                       : 1;
+		u64 cint_fault                       : 1;
+		u64 reserved_30_63                   : 34;
+	} s;
+	/* struct nixx_lf_err_int_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_ERR_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_ERR_INT_ENA_W1C(void)
+{
+	return 0x230;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_err_int_ena_w1s
+ *
+ * NIX LF Error Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union nixx_lf_err_int_ena_w1s {
+	u64 u;
+	struct nixx_lf_err_int_ena_w1s_s {
+		u64 sqb_fault                        : 1;
+		u64 sq_ctx_fault                     : 1;
+		u64 rq_ctx_fault                     : 1;
+		u64 cq_ctx_fault                     : 1;
+		u64 reserved_4                       : 1;
+		u64 rsse_fault                       : 1;
+		u64 ipsec_dyno_fault                 : 1;
+		u64 sq_disabled                      : 1;
+		u64 sq_oor                           : 1;
+		u64 send_jump_fault                  : 1;
+		u64 send_sg_fault                    : 1;
+		u64 rq_disabled                      : 1;
+		u64 rq_oor                           : 1;
+		u64 rx_wqe_fault                     : 1;
+		u64 rss_err                          : 1;
+		u64 reserved_15_19                   : 5;
+		u64 dyno_err                         : 1;
+		u64 reserved_21_23                   : 3;
+		u64 cq_disabled                      : 1;
+		u64 cq_oor                           : 1;
+		u64 reserved_26_27                   : 2;
+		u64 qint_fault                       : 1;
+		u64 cint_fault                       : 1;
+		u64 reserved_30_63                   : 34;
+	} s;
+	/* struct nixx_lf_err_int_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_ERR_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_ERR_INT_ENA_W1S(void)
+{
+	return 0x238;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_err_int_w1s
+ *
+ * NIX LF Error Interrupt Set Register This register sets interrupt bits.
+ */
+union nixx_lf_err_int_w1s {
+	u64 u;
+	struct nixx_lf_err_int_w1s_s {
+		u64 sqb_fault                        : 1;
+		u64 sq_ctx_fault                     : 1;
+		u64 rq_ctx_fault                     : 1;
+		u64 cq_ctx_fault                     : 1;
+		u64 reserved_4                       : 1;
+		u64 rsse_fault                       : 1;
+		u64 ipsec_dyno_fault                 : 1;
+		u64 sq_disabled                      : 1;
+		u64 sq_oor                           : 1;
+		u64 send_jump_fault                  : 1;
+		u64 send_sg_fault                    : 1;
+		u64 rq_disabled                      : 1;
+		u64 rq_oor                           : 1;
+		u64 rx_wqe_fault                     : 1;
+		u64 rss_err                          : 1;
+		u64 reserved_15_19                   : 5;
+		u64 dyno_err                         : 1;
+		u64 reserved_21_23                   : 3;
+		u64 cq_disabled                      : 1;
+		u64 cq_oor                           : 1;
+		u64 reserved_26_27                   : 2;
+		u64 qint_fault                       : 1;
+		u64 cint_fault                       : 1;
+		u64 reserved_30_63                   : 34;
+	} s;
+	/* struct nixx_lf_err_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_ERR_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_ERR_INT_W1S(void)
+{
+	return 0x228;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_gint
+ *
+ * NIX LF General Interrupt Register
+ */
+union nixx_lf_gint {
+	u64 u;
+	struct nixx_lf_gint_s {
+		u64 drop                             : 1;
+		u64 tcp_timer                        : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct nixx_lf_gint_s cn; */
+};
+
+static inline u64 NIXX_LF_GINT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_GINT(void)
+{
+	return 0x200;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_gint_ena_w1c
+ *
+ * NIX LF General Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_lf_gint_ena_w1c {
+	u64 u;
+	struct nixx_lf_gint_ena_w1c_s {
+		u64 drop                             : 1;
+		u64 tcp_timer                        : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct nixx_lf_gint_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_GINT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_GINT_ENA_W1C(void)
+{
+	return 0x210;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_gint_ena_w1s
+ *
+ * NIX LF General Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union nixx_lf_gint_ena_w1s {
+	u64 u;
+	struct nixx_lf_gint_ena_w1s_s {
+		u64 drop                             : 1;
+		u64 tcp_timer                        : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct nixx_lf_gint_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_GINT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_GINT_ENA_W1S(void)
+{
+	return 0x218;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_gint_w1s
+ *
+ * NIX LF General Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union nixx_lf_gint_w1s {
+	u64 u;
+	struct nixx_lf_gint_w1s_s {
+		u64 drop                             : 1;
+		u64 tcp_timer                        : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct nixx_lf_gint_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_GINT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_GINT_W1S(void)
+{
+	return 0x208;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_mnq_err_dbg
+ *
+ * NIX LF Meta-descriptor Enqueue Error Debug Register This register
+ * captures debug info for an error detected during send meta-descriptor
+ * enqueue from an SQ to an SMQ. Hardware sets [VALID] when the debug
+ * info is captured, and subsequent errors are not captured until
+ * software clears [VALID] by writing a one to it.
+ */
+union nixx_lf_mnq_err_dbg {
+	u64 u;
+	struct nixx_lf_mnq_err_dbg_s {
+		u64 errcode                          : 8;
+		u64 sq                               : 20;
+		u64 sqe_id                           : 16;
+		u64 valid                            : 1;
+		u64 reserved_45_63                   : 19;
+	} s;
+	/* struct nixx_lf_mnq_err_dbg_s cn; */
+};
+
+static inline u64 NIXX_LF_MNQ_ERR_DBG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_MNQ_ERR_DBG(void)
+{
+	return 0x270;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_op_ipsec_dyno_cnt
+ *
+ * INTERNAL: NIX LF IPSEC Dynamic Ordering Counter Operation Register
+ * Internal: Not used; no IPSEC fast-path. All accesses are RAZ/WI.
+ */
+union nixx_lf_op_ipsec_dyno_cnt {
+	u64 u;
+	struct nixx_lf_op_ipsec_dyno_cnt_s {
+		u64 count                            : 32;
+		u64 reserved_32_46                   : 15;
+		u64 storeop                          : 1;
+		u64 dyno_sel                         : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_op_ipsec_dyno_cnt_s cn; */
+};
+
+static inline u64 NIXX_LF_OP_IPSEC_DYNO_CNT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_OP_IPSEC_DYNO_CNT(void)
+{
+	return 0x980;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_op_send#
+ *
+ * NIX LF Send Operation Registers An LMTST (or large store from CPT) to
+ * this address enqueues one or more SQEs to a send queue.
+ * NIX_SEND_HDR_S[SQ] in the first SQE selects the send queue.The maximum
+ * size of each SQE is specified by NIX_SQ_CTX_S[MAX_SQE_SIZE].  A read
+ * to this address is RAZ.  An RSL access to this address will fault.
+ * The endianness of the instruction write data is controlled by
+ * NIX_AF_LF()_CFG[BE].  When a NIX_SEND_JUMP_S is not present in the
+ * SQE, the SQE consists of the entire send descriptor.  When a
+ * NIX_SEND_JUMP_S is present in the SQE, the SQE must contain exactly
+ * the portion of the send descriptor up to and including the
+ * NIX_SEND_JUMP_S, and the remainder of the send descriptor must be at
+ * LF IOVA NIX_SEND_JUMP_S[ADDR] in LLC/DRAM.  Software must ensure that
+ * all LLC/DRAM locations that will be referenced by NIX while processing
+ * this descriptor, including all packet data and post-jump
+ * subdescriptors contain the latest updates before issuing the LMTST. A
+ * DMB instruction may be required prior to the LMTST to ensure this. A
+ * DMB following the LMTST may be useful if SQ descriptor ordering
+ * matters and more than one CPU core is simultaneously enqueueing to the
+ * same SQ.
+ */
+union nixx_lf_op_sendx {
+	u64 u;
+	struct nixx_lf_op_sendx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct nixx_lf_op_sendx_s cn; */
+};
+
+static inline u64 NIXX_LF_OP_SENDX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_OP_SENDX(u64 a)
+{
+	return 0x800 + 8 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_cnt
+ *
+ * NIX LF Queue Interrupt Count Registers
+ */
+union nixx_lf_qintx_cnt {
+	u64 u;
+	struct nixx_lf_qintx_cnt_s {
+		u64 count                            : 22;
+		u64 reserved_22_63                   : 42;
+	} s;
+	/* struct nixx_lf_qintx_cnt_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_CNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_CNT(u64 a)
+{
+	return 0xc00 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_ena_w1c
+ *
+ * NIX LF Queue Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union nixx_lf_qintx_ena_w1c {
+	u64 u;
+	struct nixx_lf_qintx_ena_w1c_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_qintx_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_ENA_W1C(u64 a)
+{
+	return 0xc30 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_ena_w1s
+ *
+ * NIX LF Queue Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union nixx_lf_qintx_ena_w1s {
+	u64 u;
+	struct nixx_lf_qintx_ena_w1s_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_qintx_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_ENA_W1S(u64 a)
+{
+	return 0xc20 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_int
+ *
+ * NIX LF Queue Interrupt Registers
+ */
+union nixx_lf_qintx_int {
+	u64 u;
+	struct nixx_lf_qintx_int_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_qintx_int_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_INT(u64 a)
+{
+	return 0xc10 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_qint#_int_w1s
+ *
+ * INTERNAL: NIX LF Queue Interrupt Set Registers
+ */
+union nixx_lf_qintx_int_w1s {
+	u64 u;
+	struct nixx_lf_qintx_int_w1s_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct nixx_lf_qintx_int_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_QINTX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_QINTX_INT_W1S(u64 a)
+{
+	return 0xc18 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_ras
+ *
+ * NIX LF RAS Interrupt Register
+ */
+union nixx_lf_ras {
+	u64 u;
+	struct nixx_lf_ras_s {
+		u64 sqb_poison                       : 1;
+		u64 sq_ctx_poison                    : 1;
+		u64 rq_ctx_poison                    : 1;
+		u64 cq_ctx_poison                    : 1;
+		u64 reserved_4                       : 1;
+		u64 rsse_poison                      : 1;
+		u64 ipsec_dyno_poison                : 1;
+		u64 send_jump_poison                 : 1;
+		u64 send_sg_poison                   : 1;
+		u64 qint_poison                      : 1;
+		u64 cint_poison                      : 1;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_lf_ras_s cn; */
+};
+
+static inline u64 NIXX_LF_RAS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RAS(void)
+{
+	return 0x240;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_ras_ena_w1c
+ *
+ * NIX LF RAS Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union nixx_lf_ras_ena_w1c {
+	u64 u;
+	struct nixx_lf_ras_ena_w1c_s {
+		u64 sqb_poison                       : 1;
+		u64 sq_ctx_poison                    : 1;
+		u64 rq_ctx_poison                    : 1;
+		u64 cq_ctx_poison                    : 1;
+		u64 reserved_4                       : 1;
+		u64 rsse_poison                      : 1;
+		u64 ipsec_dyno_poison                : 1;
+		u64 send_jump_poison                 : 1;
+		u64 send_sg_poison                   : 1;
+		u64 qint_poison                      : 1;
+		u64 cint_poison                      : 1;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_lf_ras_ena_w1c_s cn; */
+};
+
+static inline u64 NIXX_LF_RAS_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RAS_ENA_W1C(void)
+{
+	return 0x250;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_ras_ena_w1s
+ *
+ * NIX LF RAS Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union nixx_lf_ras_ena_w1s {
+	u64 u;
+	struct nixx_lf_ras_ena_w1s_s {
+		u64 sqb_poison                       : 1;
+		u64 sq_ctx_poison                    : 1;
+		u64 rq_ctx_poison                    : 1;
+		u64 cq_ctx_poison                    : 1;
+		u64 reserved_4                       : 1;
+		u64 rsse_poison                      : 1;
+		u64 ipsec_dyno_poison                : 1;
+		u64 send_jump_poison                 : 1;
+		u64 send_sg_poison                   : 1;
+		u64 qint_poison                      : 1;
+		u64 cint_poison                      : 1;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_lf_ras_ena_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_RAS_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RAS_ENA_W1S(void)
+{
+	return 0x258;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_ras_w1s
+ *
+ * NIX LF RAS Interrupt Set Register This register sets interrupt bits.
+ */
+union nixx_lf_ras_w1s {
+	u64 u;
+	struct nixx_lf_ras_w1s_s {
+		u64 sqb_poison                       : 1;
+		u64 sq_ctx_poison                    : 1;
+		u64 rq_ctx_poison                    : 1;
+		u64 cq_ctx_poison                    : 1;
+		u64 reserved_4                       : 1;
+		u64 rsse_poison                      : 1;
+		u64 ipsec_dyno_poison                : 1;
+		u64 send_jump_poison                 : 1;
+		u64 send_sg_poison                   : 1;
+		u64 qint_poison                      : 1;
+		u64 cint_poison                      : 1;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct nixx_lf_ras_w1s_s cn; */
+};
+
+static inline u64 NIXX_LF_RAS_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RAS_W1S(void)
+{
+	return 0x248;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_drop_octs
+ *
+ * NIX LF Receive Queue Dropped Octets Operation Register A 64-bit atomic
+ * load-and-add to this register reads NIX_RQ_CTX_S[DROP_OCTS]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the RQ
+ * within LF.  All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI.  RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_drop_octs {
+	u64 u;
+	struct nixx_lf_rq_op_drop_octs_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_rq_op_drop_octs_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_DROP_OCTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_DROP_OCTS(void)
+{
+	return 0x930;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_drop_pkts
+ *
+ * NIX LF Receive Queue Dropped Packets Operation Register A 64-bit
+ * atomic load-and-add to this register reads NIX_RQ_CTX_S[DROP_PKTS].
+ * The atomic write data has format NIX_OP_Q_WDATA_S and selects the RQ
+ * within LF.  All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI.  RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_drop_pkts {
+	u64 u;
+	struct nixx_lf_rq_op_drop_pkts_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_rq_op_drop_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_DROP_PKTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_DROP_PKTS(void)
+{
+	return 0x940;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_int
+ *
+ * NIX LF Receive Queue Interrupt Operation Register A 64-bit atomic
+ * load-and-add to this register reads RQ interrupts and interrupt
+ * enables. A 64-bit write optionally sets or clears interrupts and
+ * interrupt enables.  All other accesses to this register (e.g. reads,
+ * 128-bit accesses) are RAZ/WI.  RSL accesses to this register are
+ * RAZ/WI.
+ */
+union nixx_lf_rq_op_int {
+	u64 u;
+	struct nixx_lf_rq_op_int_s {
+		u64 rq_int                           : 8;
+		u64 rq_int_ena                       : 8;
+		u64 reserved_16_41                   : 26;
+		u64 op_err                           : 1;
+		u64 setop                            : 1;
+		u64 rq                               : 20;
+	} s;
+	/* struct nixx_lf_rq_op_int_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_INT(void)
+{
+	return 0x900;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_octs
+ *
+ * NIX LF Receive Queue Octets Operation Register A 64-bit atomic load-
+ * and-add to this register reads NIX_RQ_CTX_S[OCTS]. The atomic write
+ * data has format NIX_OP_Q_WDATA_S and selects the RQ within LF.  All
+ * other accesses to this register (e.g. reads and writes) are RAZ/WI.
+ * RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_octs {
+	u64 u;
+	struct nixx_lf_rq_op_octs_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_rq_op_octs_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_OCTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_OCTS(void)
+{
+	return 0x910;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_pkts
+ *
+ * NIX LF Receive Queue Packets Operation Register A 64-bit atomic load-
+ * and-add to this register reads NIX_RQ_CTX_S[PKTS]. The atomic write
+ * data has format NIX_OP_Q_WDATA_S and selects the RQ within LF.  All
+ * other accesses to this register (e.g. reads and writes) are RAZ/WI.
+ * RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_pkts {
+	u64 u;
+	struct nixx_lf_rq_op_pkts_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_rq_op_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_PKTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_PKTS(void)
+{
+	return 0x920;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rq_op_re_pkts
+ *
+ * NIX LF Receive Queue Errored Packets Operation Register A 64-bit
+ * atomic load-and-add to this register reads NIX_RQ_CTX_S[RE_PKTS]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the RQ
+ * within LF.  All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI.  RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_rq_op_re_pkts {
+	u64 u;
+	struct nixx_lf_rq_op_re_pkts_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_rq_op_re_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_RQ_OP_RE_PKTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RQ_OP_RE_PKTS(void)
+{
+	return 0x950;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rx_secret#
+ *
+ * NIX LF Receive Secret Key Registers
+ */
+union nixx_lf_rx_secretx {
+	u64 u;
+	struct nixx_lf_rx_secretx_s {
+		u64 key                              : 64;
+	} s;
+	/* struct nixx_lf_rx_secretx_s cn; */
+};
+
+static inline u64 NIXX_LF_RX_SECRETX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RX_SECRETX(u64 a)
+{
+	return 0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_rx_stat#
+ *
+ * NIX LF Receive Statistics Registers The last dimension indicates which
+ * statistic, and is enumerated by NIX_STAT_LF_RX_E.
+ */
+union nixx_lf_rx_statx {
+	u64 u;
+	struct nixx_lf_rx_statx_s {
+		u64 stat                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_lf_rx_statx_s cn; */
+};
+
+static inline u64 NIXX_LF_RX_STATX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_RX_STATX(u64 a)
+{
+	return 0x400 + 8 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_send_err_dbg
+ *
+ * NIX LF Send Error Debug Register This register captures debug info an
+ * error detected on packet send after a meta-descriptor is granted by
+ * PSE. Hardware sets [VALID] when the debug info is captured, and
+ * subsequent errors are not captured until software clears [VALID] by
+ * writing a one to it.
+ */
+union nixx_lf_send_err_dbg {
+	u64 u;
+	struct nixx_lf_send_err_dbg_s {
+		u64 errcode                          : 8;
+		u64 sq                               : 20;
+		u64 sqe_id                           : 16;
+		u64 valid                            : 1;
+		u64 reserved_45_63                   : 19;
+	} s;
+	/* struct nixx_lf_send_err_dbg_s cn; */
+};
+
+static inline u64 NIXX_LF_SEND_ERR_DBG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SEND_ERR_DBG(void)
+{
+	return 0x280;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_drop_octs
+ *
+ * NIX LF Send Queue Dropped Octets Operation Register A 64-bit atomic
+ * load-and-add to this register reads NIX_SQ_CTX_S[DROP_OCTS]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the SQ
+ * within LF.  All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI.  RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_drop_octs {
+	u64 u;
+	struct nixx_lf_sq_op_drop_octs_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_sq_op_drop_octs_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_DROP_OCTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_DROP_OCTS(void)
+{
+	return 0xa40;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_drop_pkts
+ *
+ * NIX LF Send Queue Dropped Packets Operation Register A 64-bit atomic
+ * load-and-add to this register reads NIX_SQ_CTX_S[DROP_PKTS]. The
+ * atomic write data has format NIX_OP_Q_WDATA_S and selects the SQ
+ * within LF.  All other accesses to this register (e.g. reads and
+ * writes) are RAZ/WI.  RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_drop_pkts {
+	u64 u;
+	struct nixx_lf_sq_op_drop_pkts_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_sq_op_drop_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_DROP_PKTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_DROP_PKTS(void)
+{
+	return 0xa50;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_err_dbg
+ *
+ * NIX LF SQ Operation Error Debug Register This register captures debug
+ * info for an error detected on LMT store to NIX_LF_OP_SEND() or when a
+ * NIX_LF_SQ_OP_* register is accessed. Hardware sets [VALID] when the
+ * debug info is captured, and subsequent errors are not captured until
+ * software clears [VALID] by writing a one to it.
+ */
+union nixx_lf_sq_op_err_dbg {
+	u64 u;
+	struct nixx_lf_sq_op_err_dbg_s {
+		u64 errcode                          : 8;
+		u64 sq                               : 20;
+		u64 sqe_id                           : 16;
+		u64 valid                            : 1;
+		u64 reserved_45_63                   : 19;
+	} s;
+	/* struct nixx_lf_sq_op_err_dbg_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_ERR_DBG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_ERR_DBG(void)
+{
+	return 0x260;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_int
+ *
+ * NIX LF Send Queue Interrupt Operation Register A 64-bit atomic load-
+ * and-add to this register reads SQ interrupts, interrupt enables and
+ * XOFF status. A write optionally sets or clears interrupts, interrupt
+ * enables and XOFF status. A read is RAZ.  RSL accesses to this register
+ * are RAZ/WI.
+ */
+union nixx_lf_sq_op_int {
+	u64 u;
+	struct nixx_lf_sq_op_int_s {
+		u64 sq_int                           : 8;
+		u64 sq_int_ena                       : 8;
+		u64 xoff                             : 1;
+		u64 reserved_17_41                   : 25;
+		u64 op_err                           : 1;
+		u64 setop                            : 1;
+		u64 sq                               : 20;
+	} s;
+	/* struct nixx_lf_sq_op_int_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_INT(void)
+{
+	return 0xa00;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_octs
+ *
+ * NIX LF Send Queue Octets Operation Register A 64-bit atomic load-and-
+ * add to this register reads NIX_SQ_CTX_S[OCTS]. The atomic write data
+ * has format NIX_OP_Q_WDATA_S and selects the SQ within LF.  All other
+ * accesses to this register (e.g. reads and writes) are RAZ/WI.  RSL
+ * accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_octs {
+	u64 u;
+	struct nixx_lf_sq_op_octs_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_sq_op_octs_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_OCTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_OCTS(void)
+{
+	return 0xa10;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_pkts
+ *
+ * NIX LF Send Queue Packets Operation Register A 64-bit atomic load-and-
+ * add to this register reads NIX_SQ_CTX_S[PKTS]. The atomic write data
+ * has format NIX_OP_Q_WDATA_S and selects the SQ within LF.  All other
+ * accesses to this register (e.g. reads and writes) are RAZ/WI.  RSL
+ * accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_pkts {
+	u64 u;
+	struct nixx_lf_sq_op_pkts_s {
+		u64 cnt                              : 48;
+		u64 reserved_48_62                   : 15;
+		u64 op_err                           : 1;
+	} s;
+	/* struct nixx_lf_sq_op_pkts_s cn; */
+};
+
+static inline u64 NIXX_LF_SQ_OP_PKTS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_PKTS(void)
+{
+	return 0xa20;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_sq_op_status
+ *
+ * NIX LF Send Queue Status Operation Register A 64-bit atomic load-and-
+ * add to this register reads status fields in NIX_SQ_CTX_S. The atomic
+ * write data has format NIX_OP_Q_WDATA_S and selects the SQ within LF.
+ * Completion of the load-and-add operation also ensures that all
+ * previously issued LMT stores to NIX_LF_OP_SEND() have completed.  All
+ * other accesses to this register (e.g. reads and writes) are RAZ/WI.
+ * RSL accesses to this register are RAZ/WI.
+ */
+union nixx_lf_sq_op_status {
+	u64 u;
+	struct nixx_lf_sq_op_status_s {
+		u64 sqb_count                        : 16;
+		u64 reserved_16_19                   : 4;
+		u64 head_offset                      : 6;
+		u64 reserved_26_27                   : 2;
+		u64 tail_offset                      : 6;
+		u64 reserved_34_62                   : 29;
+		u64 op_err                           : 1;
+	} s;
+	struct nixx_lf_sq_op_status_cn {
+		u64 sqb_count                        : 16;
+		u64 reserved_16_19                   : 4;
+		u64 head_offset                      : 6;
+		u64 reserved_26_27                   : 2;
+		u64 tail_offset                      : 6;
+		u64 reserved_34_35                   : 2;
+		u64 reserved_36_62                   : 27;
+		u64 op_err                           : 1;
+	} cn;
+};
+
+static inline u64 NIXX_LF_SQ_OP_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_SQ_OP_STATUS(void)
+{
+	return 0xa30;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) nix#_lf_tx_stat#
+ *
+ * NIX LF Transmit Statistics Registers The last dimension indicates
+ * which statistic, and is enumerated by NIX_STAT_LF_TX_E.
+ */
+union nixx_lf_tx_statx {
+	u64 u;
+	struct nixx_lf_tx_statx_s {
+		u64 stat                             : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct nixx_lf_tx_statx_s cn; */
+};
+
+static inline u64 NIXX_LF_TX_STATX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_LF_TX_STATX(u64 a)
+{
+	return 0x300 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_priv_af_int_cfg
+ *
+ * NIX Privileged Admin Function Interrupt Configuration Register
+ */
+union nixx_priv_af_int_cfg {
+	u64 u;
+	struct nixx_priv_af_int_cfg_s {
+		u64 msix_offset                      : 11;
+		u64 reserved_11                      : 1;
+		u64 msix_size                        : 8;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct nixx_priv_af_int_cfg_s cn; */
+};
+
+static inline u64 NIXX_PRIV_AF_INT_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_PRIV_AF_INT_CFG(void)
+{
+	return 0x8000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_priv_lf#_cfg
+ *
+ * NIX Privileged Local Function Configuration Registers These registers
+ * allow each NIX local function (LF) to be provisioned to a VF/PF for
+ * RVU. See also NIX_AF_RVU_LF_CFG_DEBUG.  Software should read this
+ * register after write to ensure that the LF is mapped to [PF_FUNC]
+ * before issuing transactions to the mapped PF and function.  [SLOT]
+ * must be zero.  Internal: Hardware ignores [SLOT] and always assumes
+ * 0x0.
+ */
+union nixx_priv_lfx_cfg {
+	u64 u;
+	struct nixx_priv_lfx_cfg_s {
+		u64 slot                             : 8;
+		u64 pf_func                          : 16;
+		u64 reserved_24_62                   : 39;
+		u64 ena                              : 1;
+	} s;
+	/* struct nixx_priv_lfx_cfg_s cn; */
+};
+
+static inline u64 NIXX_PRIV_LFX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_PRIV_LFX_CFG(u64 a)
+{
+	return 0x8000010 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) nix#_priv_lf#_int_cfg
+ *
+ * NIX Privileged LF Interrupt Configuration Registers
+ */
+union nixx_priv_lfx_int_cfg {
+	u64 u;
+	struct nixx_priv_lfx_int_cfg_s {
+		u64 msix_offset                      : 11;
+		u64 reserved_11                      : 1;
+		u64 msix_size                        : 8;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct nixx_priv_lfx_int_cfg_s cn; */
+};
+
+static inline u64 NIXX_PRIV_LFX_INT_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NIXX_PRIV_LFX_INT_CFG(u64 a)
+{
+	return 0x8000020 + 0x100 * a;
+}
+
+#endif /* __CSRS_NIX_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-npa.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-npa.h
new file mode 100644
index 000000000..b70c91bf0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-npa.h
@@ -0,0 +1,2294 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_NPA_H__
+#define __CSRS_NPA_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * NPA.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Enumeration npa_af_int_vec_e
+ *
+ * NPA Admin Function Interrupt Vector Enumeration Enumerates the NPA AF
+ * MSI-X interrupt vectors.
+ */
+#define NPA_AF_INT_VEC_E_AF_ERR (3)
+#define NPA_AF_INT_VEC_E_AQ_DONE (2)
+#define NPA_AF_INT_VEC_E_GEN (1)
+#define NPA_AF_INT_VEC_E_POISON (4)
+#define NPA_AF_INT_VEC_E_RVU (0)
+
+/**
+ * Enumeration npa_aq_comp_e
+ *
+ * NPA Admin Queue Completion Enumeration Enumerates the values of
+ * NPA_AQ_RES_S[COMPCODE].
+ */
+#define NPA_AQ_COMP_E_CTX_FAULT (4)
+#define NPA_AQ_COMP_E_CTX_POISON (3)
+#define NPA_AQ_COMP_E_GOOD (1)
+#define NPA_AQ_COMP_E_LOCKERR (5)
+#define NPA_AQ_COMP_E_NOTDONE (0)
+#define NPA_AQ_COMP_E_SWERR (2)
+
+/**
+ * Enumeration npa_aq_ctype_e
+ *
+ * NPA Admin Queue Context Type Enumeration Enumerates
+ * NPA_AQ_INST_S[CTYPE] values.
+ */
+#define NPA_AQ_CTYPE_E_AURA (0)
+#define NPA_AQ_CTYPE_E_POOL (1)
+
+/**
+ * Enumeration npa_aq_instop_e
+ *
+ * NPA Admin Queue Opcode Enumeration Enumerates NPA_AQ_INST_S[OP]
+ * values.
+ */
+#define NPA_AQ_INSTOP_E_INIT (1)
+#define NPA_AQ_INSTOP_E_LOCK (4)
+#define NPA_AQ_INSTOP_E_NOP (0)
+#define NPA_AQ_INSTOP_E_READ (3)
+#define NPA_AQ_INSTOP_E_UNLOCK (5)
+#define NPA_AQ_INSTOP_E_WRITE (2)
+
+/**
+ * Enumeration npa_aura_err_int_e
+ *
+ * NPA Aura Error Interrupt Enumeration Enumerates the bit index of
+ * NPA_AURA_S[ERR_INT], and NPA_AURA_S[ERR_INT_ENA].
+ */
+#define NPA_AURA_ERR_INT_E_AURA_ADD_OVER (1)
+#define NPA_AURA_ERR_INT_E_AURA_ADD_UNDER (2)
+#define NPA_AURA_ERR_INT_E_AURA_FREE_UNDER (0)
+#define NPA_AURA_ERR_INT_E_POOL_DIS (3)
+#define NPA_AURA_ERR_INT_E_RX(a) (0 + (a))
+
+/**
+ * Enumeration npa_bpintf_e
+ *
+ * NPA Backpressure Interface Enumeration Enumerates index of
+ * NPA_AURA_S[BP_ENA].
+ */
+#define NPA_BPINTF_E_NIXX_RX(a) (0 + (a))
+
+/**
+ * Enumeration npa_inpq_e
+ *
+ * NPA Input Queue Enumeration Enumerates ALLOC/FREE input queues from
+ * coprocessors.
+ */
+#define NPA_INPQ_E_AURA_OP (0xe)
+#define NPA_INPQ_E_BPHY (7)
+#define NPA_INPQ_E_DPI (6)
+#define NPA_INPQ_E_INTERNAL_RSV (0xf)
+#define NPA_INPQ_E_NIXX_RX(a) (0 + 2 * (a))
+#define NPA_INPQ_E_NIXX_TX(a) (1 + 2 * (a))
+#define NPA_INPQ_E_RX(a) (0 + (a))
+#define NPA_INPQ_E_SSO (4)
+#define NPA_INPQ_E_TIM (5)
+
+/**
+ * Enumeration npa_lf_int_vec_e
+ *
+ * NPA Local Function Interrupt Vector Enumeration Enumerates the NPA
+ * MSI-X interrupt vectors per LF.
+ */
+#define NPA_LF_INT_VEC_E_ERR_INT (0x40)
+#define NPA_LF_INT_VEC_E_POISON (0x41)
+#define NPA_LF_INT_VEC_E_QINTX(a) (0 + (a))
+
+/**
+ * Enumeration npa_ndc0_port_e
+ *
+ * NPA NDC0 Port Enumeration Enumerates NPA NDC0 (NDC_IDX_E::NPA_U(0))
+ * ports and the PORT index of NDC_AF_PORT()_RT()_RW()_REQ_PC and
+ * NDC_AF_PORT()_RT()_RW()_LAT_PC.
+ */
+#define NPA_NDC0_PORT_E_AURA0 (0)
+#define NPA_NDC0_PORT_E_AURA1 (1)
+#define NPA_NDC0_PORT_E_POOL0 (2)
+#define NPA_NDC0_PORT_E_POOL1 (3)
+#define NPA_NDC0_PORT_E_STACK0 (4)
+#define NPA_NDC0_PORT_E_STACK1 (5)
+
+/**
+ * Enumeration npa_pool_err_int_e
+ *
+ * NPA Pool Error Interrupt Enumeration Enumerates the bit index of
+ * NPA_POOL_S[ERR_INT] and NPA_POOL_S[ERR_INT_ENA].
+ */
+#define NPA_POOL_ERR_INT_E_OVFLS (0)
+#define NPA_POOL_ERR_INT_E_PERR (2)
+#define NPA_POOL_ERR_INT_E_RX(a) (0 + (a))
+#define NPA_POOL_ERR_INT_E_RANGE (1)
+
+/**
+ * Structure npa_aq_inst_s
+ *
+ * NPA Admin Queue Instruction Structure This structure specifies the AQ
+ * instruction. Instructions and associated software structures are
+ * stored in memory as little-endian unless NPA_AF_GEN_CFG[AF_BE] is set.
+ * Hardware reads of NPA_AQ_INST_S do not allocate into LLC.  Hardware
+ * reads and writes of the context structure selected by [CTYPE], [LF]
+ * and [CINDEX] use the NDC and LLC caching style configured for that
+ * context, i.e.: * NPA_AURA_HW_S reads and writes use
+ * NPA_AF_LF()_AURAS_CFG[CACHING] and NPA_AF_LF()_AURAS_CFG[WAY_MASK]. *
+ * NPA_POOL_HW_S reads and writes use NPA_AURA_HW_S[POOL_CACHING] and
+ * NPA_AURA_HW_S[POOL_WAY_MASK].
+ */
+union npa_aq_inst_s {
+	u64 u[2];
+	struct npa_aq_inst_s_s {
+		u64 op                               : 4;
+		u64 ctype                            : 4;
+		u64 lf                               : 9;
+		u64 reserved_17_23                   : 7;
+		u64 cindex                           : 20;
+		u64 reserved_44_62                   : 19;
+		u64 doneint                          : 1;
+		u64 res_addr                         : 64;
+	} s;
+	/* struct npa_aq_inst_s_s cn; */
+};
+
+/**
+ * Structure npa_aq_res_s
+ *
+ * NPA Admin Queue Result Structure NPA writes this structure after it
+ * completes the NPA_AQ_INST_S instruction. The result structure is
+ * exactly 16 bytes, and each instruction completion produces exactly one
+ * result structure.  Results and associated software structures are
+ * stored in memory as little-endian unless NPA_AF_GEN_CFG[AF_BE] is set.
+ * When [OP] = NPA_AQ_INSTOP_E::INIT, WRITE or READ, this structure is
+ * immediately followed by context read or write data. See
+ * NPA_AQ_INSTOP_E.  Hardware writes of NPA_AQ_RES_S and context data
+ * always allocate into LLC. Hardware reads of context data do not
+ * allocate into LLC.
+ */
+union npa_aq_res_s {
+	u64 u[2];
+	struct npa_aq_res_s_s {
+		u64 op                               : 4;
+		u64 ctype                            : 4;
+		u64 compcode                         : 8;
+		u64 doneint                          : 1;
+		u64 reserved_17_63                   : 47;
+		u64 reserved_64_127                  : 64;
+	} s;
+	/* struct npa_aq_res_s_s cn; */
+};
+
+/**
+ * Structure npa_aura_op_wdata_s
+ *
+ * NPA Aura Operation Write Data Structure This structure specifies the
+ * write data format of a 64-bit atomic load-and-add to
+ * NPA_LF_AURA_OP_ALLOC() and NPA_LF_POOL_OP_PC, and a 128-bit atomic
+ * CASP operation to NPA_LF_AURA_OP_ALLOC().
+ */
+union npa_aura_op_wdata_s {
+	u64 u;
+	struct npa_aura_op_wdata_s_s {
+		u64 aura                             : 20;
+		u64 reserved_20_62                   : 43;
+		u64 drop                             : 1;
+	} s;
+	/* struct npa_aura_op_wdata_s_s cn; */
+};
+
+/**
+ * Structure npa_aura_s
+ *
+ * NPA Aura Context Structure This structure specifies the format used by
+ * software with the NPA admin queue to read and write an aura's
+ * NPA_AURA_HW_S structure maintained by hardware in LLC/DRAM.
+ */
+union npa_aura_s {
+	u64 u[8];
+	struct npa_aura_s_s {
+		u64 pool_addr                        : 64;
+		u64 ena                              : 1;
+		u64 reserved_65_66                   : 2;
+		u64 pool_caching                     : 1;
+		u64 pool_way_mask                    : 16;
+		u64 avg_con                          : 9;
+		u64 reserved_93                      : 1;
+		u64 pool_drop_ena                    : 1;
+		u64 aura_drop_ena                    : 1;
+		u64 bp_ena                           : 2;
+		u64 reserved_98_103                  : 6;
+		u64 aura_drop                        : 8;
+		u64 shift                            : 6;
+		u64 reserved_118_119                 : 2;
+		u64 avg_level                        : 8;
+		u64 count                            : 36;
+		u64 reserved_164_167                 : 4;
+		u64 nix0_bpid                        : 9;
+		u64 reserved_177_179                 : 3;
+		u64 nix1_bpid                        : 9;
+		u64 reserved_189_191                 : 3;
+		u64 limit                            : 36;
+		u64 reserved_228_231                 : 4;
+		u64 bp                               : 8;
+		u64 reserved_240_243                 : 4;
+		u64 fc_ena                           : 1;
+		u64 fc_up_crossing                   : 1;
+		u64 fc_stype                         : 2;
+		u64 fc_hyst_bits                     : 4;
+		u64 reserved_252_255                 : 4;
+		u64 fc_addr                          : 64;
+		u64 pool_drop                        : 8;
+		u64 update_time                      : 16;
+		u64 err_int                          : 8;
+		u64 err_int_ena                      : 8;
+		u64 thresh_int                       : 1;
+		u64 thresh_int_ena                   : 1;
+		u64 thresh_up                        : 1;
+		u64 reserved_363                     : 1;
+		u64 thresh_qint_idx                  : 7;
+		u64 reserved_371                     : 1;
+		u64 err_qint_idx                     : 7;
+		u64 reserved_379_383                 : 5;
+		u64 thresh                           : 36;
+		u64 reserved_420_447                 : 28;
+		u64 reserved_448_511                 : 64;
+	} s;
+	/* struct npa_aura_s_s cn; */
+};
+
+/**
+ * Structure npa_pool_s
+ *
+ * NPA Pool Context Structure This structure specifies the format used by
+ * software with the NPA admin queue to read and write a pool's
+ * NPA_POOL_HW_S structure maintained by hardware in LLC/DRAM.
+ */
+union npa_pool_s {
+	u64 u[16];
+	struct npa_pool_s_s {
+		u64 stack_base                       : 64;
+		u64 ena                              : 1;
+		u64 nat_align                        : 1;
+		u64 reserved_66_67                   : 2;
+		u64 stack_caching                    : 1;
+		u64 reserved_69_71                   : 3;
+		u64 stack_way_mask                   : 16;
+		u64 buf_offset                       : 12;
+		u64 reserved_100_103                 : 4;
+		u64 buf_size                         : 11;
+		u64 reserved_115_127                 : 13;
+		u64 stack_max_pages                  : 32;
+		u64 stack_pages                      : 32;
+		u64 op_pc                            : 48;
+		u64 reserved_240_255                 : 16;
+		u64 stack_offset                     : 4;
+		u64 reserved_260_263                 : 4;
+		u64 shift                            : 6;
+		u64 reserved_270_271                 : 2;
+		u64 avg_level                        : 8;
+		u64 avg_con                          : 9;
+		u64 fc_ena                           : 1;
+		u64 fc_stype                         : 2;
+		u64 fc_hyst_bits                     : 4;
+		u64 fc_up_crossing                   : 1;
+		u64 reserved_297_299                 : 3;
+		u64 update_time                      : 16;
+		u64 reserved_316_319                 : 4;
+		u64 fc_addr                          : 64;
+		u64 ptr_start                        : 64;
+		u64 ptr_end                          : 64;
+		u64 reserved_512_535                 : 24;
+		u64 err_int                          : 8;
+		u64 err_int_ena                      : 8;
+		u64 thresh_int                       : 1;
+		u64 thresh_int_ena                   : 1;
+		u64 thresh_up                        : 1;
+		u64 reserved_555                     : 1;
+		u64 thresh_qint_idx                  : 7;
+		u64 reserved_563                     : 1;
+		u64 err_qint_idx                     : 7;
+		u64 reserved_571_575                 : 5;
+		u64 thresh                           : 36;
+		u64 reserved_612_639                 : 28;
+		u64 reserved_640_703                 : 64;
+		u64 reserved_704_767                 : 64;
+		u64 reserved_768_831                 : 64;
+		u64 reserved_832_895                 : 64;
+		u64 reserved_896_959                 : 64;
+		u64 reserved_960_1023                : 64;
+	} s;
+	/* struct npa_pool_s_s cn; */
+};
+
+/**
+ * Structure npa_qint_hw_s
+ *
+ * NPA Queue Interrupt Context Hardware Structure This structure contains
+ * context state maintained by hardware for each queue interrupt (QINT)
+ * in NDC/LLC/DRAM. Software accesses this structure with the
+ * NPA_LF_QINT()_* registers. Hardware maintains a table of
+ * NPA_AF_CONST[QINTS] contiguous NPA_QINT_HW_S structures per LF
+ * starting at IOVA NPA_AF_LF()_QINTS_BASE. Always stored in byte
+ * invariant little-endian format (LE8).
+ */
+union npa_qint_hw_s {
+	u32 u;
+	struct npa_qint_hw_s_s {
+		u32 count                            : 22;
+		u32 reserved_22_30                   : 9;
+		u32 ena                              : 1;
+	} s;
+	/* struct npa_qint_hw_s_s cn; */
+};
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_active_cycles_pc
+ *
+ * NPA AF Active Cycles Register
+ */
+union npa_af_active_cycles_pc {
+	u64 u;
+	struct npa_af_active_cycles_pc_s {
+		u64 act_cyc                          : 64;
+	} s;
+	/* struct npa_af_active_cycles_pc_s cn; */
+};
+
+static inline u64 NPA_AF_ACTIVE_CYCLES_PC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ACTIVE_CYCLES_PC(void)
+{
+	return 0xf0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_base
+ *
+ * NPA AF Admin Queue Base Address Register
+ */
+union npa_af_aq_base {
+	u64 u;
+	struct npa_af_aq_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 base_addr                        : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct npa_af_aq_base_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_BASE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_BASE(void)
+{
+	return 0x610;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_cfg
+ *
+ * NPA AF Admin Queue Configuration Register
+ */
+union npa_af_aq_cfg {
+	u64 u;
+	struct npa_af_aq_cfg_s {
+		u64 qsize                            : 4;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct npa_af_aq_cfg_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_CFG(void)
+{
+	return 0x600;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done
+ *
+ * NPA AF AQ Done Count Register
+ */
+union npa_af_aq_done {
+	u64 u;
+	struct npa_af_aq_done_s {
+		u64 done                             : 20;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npa_af_aq_done_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE(void)
+{
+	return 0x650;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_ack
+ *
+ * NPA AF AQ Done Count Ack Register This register is written by software
+ * to acknowledge interrupts.
+ */
+union npa_af_aq_done_ack {
+	u64 u;
+	struct npa_af_aq_done_ack_s {
+		u64 done_ack                         : 20;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npa_af_aq_done_ack_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_ACK(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_ACK(void)
+{
+	return 0x660;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_ena_w1c
+ *
+ * NPA AF AQ Done Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_af_aq_done_ena_w1c {
+	u64 u;
+	struct npa_af_aq_done_ena_w1c_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_af_aq_done_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_ENA_W1C(void)
+{
+	return 0x698;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_ena_w1s
+ *
+ * NPA AF AQ Done Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union npa_af_aq_done_ena_w1s {
+	u64 u;
+	struct npa_af_aq_done_ena_w1s_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_af_aq_done_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_ENA_W1S(void)
+{
+	return 0x690;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_int
+ *
+ * NPA AF AQ Done Interrupt Register
+ */
+union npa_af_aq_done_int {
+	u64 u;
+	struct npa_af_aq_done_int_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_af_aq_done_int_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_INT(void)
+{
+	return 0x680;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_int_w1s
+ *
+ * INTERNAL: NPA AF AQ Done Interrupt Set Register
+ */
+union npa_af_aq_done_int_w1s {
+	u64 u;
+	struct npa_af_aq_done_int_w1s_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_af_aq_done_int_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_INT_W1S(void)
+{
+	return 0x688;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_timer
+ *
+ * NPA AF Admin Queue Done Interrupt Timer Register Used to debug the
+ * queue interrupt coalescing timer.
+ */
+union npa_af_aq_done_timer {
+	u64 u;
+	struct npa_af_aq_done_timer_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct npa_af_aq_done_timer_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_TIMER(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_TIMER(void)
+{
+	return 0x670;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_done_wait
+ *
+ * NPA AF AQ Done Interrupt Coalescing Wait Register Specifies the queue
+ * interrupt coalescing settings.
+ */
+union npa_af_aq_done_wait {
+	u64 u;
+	struct npa_af_aq_done_wait_s {
+		u64 num_wait                         : 20;
+		u64 reserved_20_31                   : 12;
+		u64 time_wait                        : 16;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct npa_af_aq_done_wait_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DONE_WAIT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DONE_WAIT(void)
+{
+	return 0x640;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_door
+ *
+ * NPA AF Admin Queue Doorbell Register Software writes to this register
+ * to enqueue one or more entries to AQ.
+ */
+union npa_af_aq_door {
+	u64 u;
+	struct npa_af_aq_door_s {
+		u64 count                            : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct npa_af_aq_door_s cn; */
+};
+
+static inline u64 NPA_AF_AQ_DOOR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_DOOR(void)
+{
+	return 0x630;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_aq_status
+ *
+ * NPA AF Admin Queue Status Register
+ */
+union npa_af_aq_status {
+	u64 u;
+	struct npa_af_aq_status_s {
+		u64 reserved_0_3                     : 4;
+		u64 head_ptr                         : 20;
+		u64 reserved_24_35                   : 12;
+		u64 tail_ptr                         : 20;
+		u64 reserved_56_61                   : 6;
+		u64 aq_busy                          : 1;
+		u64 aq_err                           : 1;
+	} s;
+	struct npa_af_aq_status_cn {
+		u64 reserved_0_3                     : 4;
+		u64 head_ptr                         : 20;
+		u64 reserved_24_31                   : 8;
+		u64 reserved_32_35                   : 4;
+		u64 tail_ptr                         : 20;
+		u64 reserved_56_61                   : 6;
+		u64 aq_busy                          : 1;
+		u64 aq_err                           : 1;
+	} cn;
+};
+
+static inline u64 NPA_AF_AQ_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AQ_STATUS(void)
+{
+	return 0x620;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_avg_delay
+ *
+ * NPA AF Queue Average Delay Register
+ */
+union npa_af_avg_delay {
+	u64 u;
+	struct npa_af_avg_delay_s {
+		u64 avg_dly                          : 19;
+		u64 reserved_19_23                   : 5;
+		u64 avg_timer                        : 16;
+		u64 reserved_40_62                   : 23;
+		u64 avg_timer_dis                    : 1;
+	} s;
+	/* struct npa_af_avg_delay_s cn; */
+};
+
+static inline u64 NPA_AF_AVG_DELAY(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_AVG_DELAY(void)
+{
+	return 0x100;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_bar2_alias#
+ *
+ * INTERNAL: NPA Admin Function  BAR2 Alias Registers  These registers
+ * alias to the NPA BAR2 registers for the PF and function selected by
+ * NPA_AF_BAR2_SEL[PF_FUNC].  Internal: Not implemented. Placeholder for
+ * bug33464.
+ */
+union npa_af_bar2_aliasx {
+	u64 u;
+	struct npa_af_bar2_aliasx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct npa_af_bar2_aliasx_s cn; */
+};
+
+static inline u64 NPA_AF_BAR2_ALIASX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_BAR2_ALIASX(u64 a)
+{
+	return 0x9100000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_bar2_sel
+ *
+ * INTERNAL: NPA Admin Function BAR2 Select Register  This register
+ * configures BAR2 accesses from the NPA_AF_BAR2_ALIAS() registers in
+ * BAR0. Internal: Not implemented. Placeholder for bug33464.
+ */
+union npa_af_bar2_sel {
+	u64 u;
+	struct npa_af_bar2_sel_s {
+		u64 alias_pf_func                    : 16;
+		u64 alias_ena                        : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct npa_af_bar2_sel_s cn; */
+};
+
+static inline u64 NPA_AF_BAR2_SEL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_BAR2_SEL(void)
+{
+	return 0x9000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_blk_rst
+ *
+ * NPA AF Block Reset Register
+ */
+union npa_af_blk_rst {
+	u64 u;
+	struct npa_af_blk_rst_s {
+		u64 rst                              : 1;
+		u64 reserved_1_62                    : 62;
+		u64 busy                             : 1;
+	} s;
+	/* struct npa_af_blk_rst_s cn; */
+};
+
+static inline u64 NPA_AF_BLK_RST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_BLK_RST(void)
+{
+	return 0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_bp_test
+ *
+ * INTERNAL: NPA AF Backpressure Test Register
+ */
+union npa_af_bp_test {
+	u64 u;
+	struct npa_af_bp_test_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 32;
+		u64 enable                           : 16;
+	} s;
+	/* struct npa_af_bp_test_s cn; */
+};
+
+static inline u64 NPA_AF_BP_TEST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_BP_TEST(void)
+{
+	return 0x200;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_const
+ *
+ * NPA AF Constants Register This register contains constants for
+ * software discovery.
+ */
+union npa_af_const {
+	u64 u;
+	struct npa_af_const_s {
+		u64 stack_page_bytes                 : 8;
+		u64 stack_page_ptrs                  : 8;
+		u64 lfs                              : 12;
+		u64 qints                            : 12;
+		u64 num_ndc                          : 3;
+		u64 reserved_43_63                   : 21;
+	} s;
+	/* struct npa_af_const_s cn; */
+};
+
+static inline u64 NPA_AF_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_CONST(void)
+{
+	return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_const1
+ *
+ * NPA AF Constants Register 1 This register contains constants for
+ * software discovery.
+ */
+union npa_af_const1 {
+	u64 u;
+	struct npa_af_const1_s {
+		u64 aura_log2bytes                   : 4;
+		u64 pool_log2bytes                   : 4;
+		u64 qint_log2bytes                   : 4;
+		u64 reserved_12_63                   : 52;
+	} s;
+	/* struct npa_af_const1_s cn; */
+};
+
+static inline u64 NPA_AF_CONST1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_CONST1(void)
+{
+	return 0x18;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_dtx_filter_ctl
+ *
+ * NPA AF DTX LF Filter Control Register
+ */
+union npa_af_dtx_filter_ctl {
+	u64 u;
+	struct npa_af_dtx_filter_ctl_s {
+		u64 ena                              : 1;
+		u64 reserved_1_3                     : 3;
+		u64 lf                               : 7;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct npa_af_dtx_filter_ctl_s cn; */
+};
+
+static inline u64 NPA_AF_DTX_FILTER_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_DTX_FILTER_CTL(void)
+{
+	return 0x10040;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_eco
+ *
+ * INTERNAL: NPA AF ECO Register
+ */
+union npa_af_eco {
+	u64 u;
+	struct npa_af_eco_s {
+		u64 eco_rw                           : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct npa_af_eco_s cn; */
+};
+
+static inline u64 NPA_AF_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ECO(void)
+{
+	return 0x300;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_err_int
+ *
+ * NPA Admin Function Error Interrupt Register
+ */
+union npa_af_err_int {
+	u64 u;
+	struct npa_af_err_int_s {
+		u64 reserved_0_11                    : 12;
+		u64 aq_door_err                      : 1;
+		u64 aq_res_fault                     : 1;
+		u64 aq_inst_fault                    : 1;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct npa_af_err_int_s cn; */
+};
+
+static inline u64 NPA_AF_ERR_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ERR_INT(void)
+{
+	return 0x180;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_err_int_ena_w1c
+ *
+ * NPA Admin Function Error Interrupt Enable Clear Register This register
+ * clears interrupt enable bits.
+ */
+union npa_af_err_int_ena_w1c {
+	u64 u;
+	struct npa_af_err_int_ena_w1c_s {
+		u64 reserved_0_11                    : 12;
+		u64 aq_door_err                      : 1;
+		u64 aq_res_fault                     : 1;
+		u64 aq_inst_fault                    : 1;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct npa_af_err_int_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_ERR_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ERR_INT_ENA_W1C(void)
+{
+	return 0x198;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_err_int_ena_w1s
+ *
+ * NPA Admin Function Error Interrupt Enable Set Register This register
+ * sets interrupt enable bits.
+ */
+union npa_af_err_int_ena_w1s {
+	u64 u;
+	struct npa_af_err_int_ena_w1s_s {
+		u64 reserved_0_11                    : 12;
+		u64 aq_door_err                      : 1;
+		u64 aq_res_fault                     : 1;
+		u64 aq_inst_fault                    : 1;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct npa_af_err_int_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_ERR_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ERR_INT_ENA_W1S(void)
+{
+	return 0x190;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_err_int_w1s
+ *
+ * NPA Admin Function Error Interrupt Set Register This register sets
+ * interrupt bits.
+ */
+union npa_af_err_int_w1s {
+	u64 u;
+	struct npa_af_err_int_w1s_s {
+		u64 reserved_0_11                    : 12;
+		u64 aq_door_err                      : 1;
+		u64 aq_res_fault                     : 1;
+		u64 aq_inst_fault                    : 1;
+		u64 reserved_15_63                   : 49;
+	} s;
+	/* struct npa_af_err_int_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_ERR_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_ERR_INT_W1S(void)
+{
+	return 0x188;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_cfg
+ *
+ * NPA AF General Configuration Register This register provides NPA
+ * control and status information.
+ */
+union npa_af_gen_cfg {
+	u64 u;
+	struct npa_af_gen_cfg_s {
+		u64 reserved_0                       : 1;
+		u64 af_be                            : 1;
+		u64 reserved_2                       : 1;
+		u64 force_cond_clk_en                : 1;
+		u64 force_intf_clk_en                : 1;
+		u64 reserved_5_9                     : 5;
+		u64 ocla_bp                          : 1;
+		u64 reserved_11                      : 1;
+		u64 ratem1                           : 4;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct npa_af_gen_cfg_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_CFG(void)
+{
+	return 0x30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_int
+ *
+ * NPA AF General Interrupt Register This register contains general error
+ * interrupt summary bits.
+ */
+union npa_af_gen_int {
+	u64 u;
+	struct npa_af_gen_int_s {
+		u64 free_dis                         : 16;
+		u64 alloc_dis                        : 16;
+		u64 unmapped_pf_func                 : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct npa_af_gen_int_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_INT(void)
+{
+	return 0x140;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_int_ena_w1c
+ *
+ * NPA AF General Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_af_gen_int_ena_w1c {
+	u64 u;
+	struct npa_af_gen_int_ena_w1c_s {
+		u64 free_dis                         : 16;
+		u64 alloc_dis                        : 16;
+		u64 unmapped_pf_func                 : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct npa_af_gen_int_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_INT_ENA_W1C(void)
+{
+	return 0x158;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_int_ena_w1s
+ *
+ * NPA AF General Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union npa_af_gen_int_ena_w1s {
+	u64 u;
+	struct npa_af_gen_int_ena_w1s_s {
+		u64 free_dis                         : 16;
+		u64 alloc_dis                        : 16;
+		u64 unmapped_pf_func                 : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct npa_af_gen_int_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_INT_ENA_W1S(void)
+{
+	return 0x150;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_gen_int_w1s
+ *
+ * NPA AF General Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union npa_af_gen_int_w1s {
+	u64 u;
+	struct npa_af_gen_int_w1s_s {
+		u64 free_dis                         : 16;
+		u64 alloc_dis                        : 16;
+		u64 unmapped_pf_func                 : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct npa_af_gen_int_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_GEN_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_GEN_INT_W1S(void)
+{
+	return 0x148;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_inp_ctl
+ *
+ * NPA AF Input Control Register
+ */
+union npa_af_inp_ctl {
+	u64 u;
+	struct npa_af_inp_ctl_s {
+		u64 free_dis                         : 16;
+		u64 alloc_dis                        : 16;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct npa_af_inp_ctl_s cn; */
+};
+
+static inline u64 NPA_AF_INP_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_INP_CTL(void)
+{
+	return 0xd0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf#_auras_cfg
+ *
+ * NPA AF Local Function Auras Configuration Registers
+ */
+union npa_af_lfx_auras_cfg {
+	u64 u;
+	struct npa_af_lfx_auras_cfg_s {
+		u64 way_mask                         : 16;
+		u64 loc_aura_size                    : 4;
+		u64 loc_aura_offset                  : 14;
+		u64 caching                          : 1;
+		u64 be                               : 1;
+		u64 rmt_aura_size                    : 4;
+		u64 rmt_aura_offset                  : 14;
+		u64 rmt_lf                           : 7;
+		u64 reserved_61_63                   : 3;
+	} s;
+	struct npa_af_lfx_auras_cfg_cn96xxp1 {
+		u64 way_mask                         : 16;
+		u64 loc_aura_size                    : 4;
+		u64 loc_aura_offset                  : 14;
+		u64 caching                          : 1;
+		u64 reserved_35                      : 1;
+		u64 rmt_aura_size                    : 4;
+		u64 rmt_aura_offset                  : 14;
+		u64 rmt_lf                           : 7;
+		u64 reserved_61_63                   : 3;
+	} cn96xxp1;
+	/* struct npa_af_lfx_auras_cfg_s cn96xxp3; */
+	/* struct npa_af_lfx_auras_cfg_s cnf95xx; */
+};
+
+static inline u64 NPA_AF_LFX_AURAS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LFX_AURAS_CFG(u64 a)
+{
+	return 0x4000 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf#_loc_auras_base
+ *
+ * NPA AF Local Function Auras Base Registers
+ */
+union npa_af_lfx_loc_auras_base {
+	u64 u;
+	struct npa_af_lfx_loc_auras_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct npa_af_lfx_loc_auras_base_s cn; */
+};
+
+static inline u64 NPA_AF_LFX_LOC_AURAS_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LFX_LOC_AURAS_BASE(u64 a)
+{
+	return 0x4010 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf#_qints_base
+ *
+ * NPA AF Local Function Queue Interrupts Base Registers
+ */
+union npa_af_lfx_qints_base {
+	u64 u;
+	struct npa_af_lfx_qints_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct npa_af_lfx_qints_base_s cn; */
+};
+
+static inline u64 NPA_AF_LFX_QINTS_BASE(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LFX_QINTS_BASE(u64 a)
+{
+	return 0x4110 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf#_qints_cfg
+ *
+ * NPA AF Local Function Queue Interrupts Configuration Registers This
+ * register controls access to the LF's queue interrupt context table in
+ * LLC/DRAM. The table consists of NPA_AF_CONST[QINTS] contiguous
+ * NPA_QINT_HW_S structures. The size of each structure is 1 \<\<
+ * NPA_AF_CONST1[QINT_LOG2BYTES] bytes.
+ */
+union npa_af_lfx_qints_cfg {
+	u64 u;
+	struct npa_af_lfx_qints_cfg_s {
+		u64 reserved_0_19                    : 20;
+		u64 way_mask                         : 16;
+		u64 caching                          : 2;
+		u64 reserved_38_63                   : 26;
+	} s;
+	/* struct npa_af_lfx_qints_cfg_s cn; */
+};
+
+static inline u64 NPA_AF_LFX_QINTS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LFX_QINTS_CFG(u64 a)
+{
+	return 0x4100 + 0x40000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_lf_rst
+ *
+ * NPA Admin Function LF Reset Register
+ */
+union npa_af_lf_rst {
+	u64 u;
+	struct npa_af_lf_rst_s {
+		u64 lf                               : 8;
+		u64 reserved_8_11                    : 4;
+		u64 exec                             : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct npa_af_lf_rst_s cn; */
+};
+
+static inline u64 NPA_AF_LF_RST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_LF_RST(void)
+{
+	return 0x20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ndc_cfg
+ *
+ * NDC AF General Configuration Register This register provides NDC
+ * control.
+ */
+union npa_af_ndc_cfg {
+	u64 u;
+	struct npa_af_ndc_cfg_s {
+		u64 ndc_bypass                       : 1;
+		u64 ndc_ign_pois                     : 1;
+		u64 byp_aura                         : 1;
+		u64 byp_pool                         : 1;
+		u64 byp_stack                        : 1;
+		u64 byp_qint                         : 1;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct npa_af_ndc_cfg_s cn; */
+};
+
+static inline u64 NPA_AF_NDC_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_NDC_CFG(void)
+{
+	return 0x40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ndc_sync
+ *
+ * NPA AF NDC Sync Register Used to synchronize the NPA NDC.
+ */
+union npa_af_ndc_sync {
+	u64 u;
+	struct npa_af_ndc_sync_s {
+		u64 lf                               : 8;
+		u64 reserved_8_11                    : 4;
+		u64 exec                             : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct npa_af_ndc_sync_s cn; */
+};
+
+static inline u64 NPA_AF_NDC_SYNC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_NDC_SYNC(void)
+{
+	return 0x50;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ras
+ *
+ * NPA AF RAS Interrupt Register This register is intended for delivery
+ * of RAS events to the SCP, so should be ignored by OS drivers.
+ */
+union npa_af_ras {
+	u64 u;
+	struct npa_af_ras_s {
+		u64 reserved_0_31                    : 32;
+		u64 aq_ctx_poison                    : 1;
+		u64 aq_res_poison                    : 1;
+		u64 aq_inst_poison                   : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct npa_af_ras_s cn; */
+};
+
+static inline u64 NPA_AF_RAS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RAS(void)
+{
+	return 0x1a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ras_ena_w1c
+ *
+ * NPA AF RAS Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_af_ras_ena_w1c {
+	u64 u;
+	struct npa_af_ras_ena_w1c_s {
+		u64 reserved_0_31                    : 32;
+		u64 aq_ctx_poison                    : 1;
+		u64 aq_res_poison                    : 1;
+		u64 aq_inst_poison                   : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct npa_af_ras_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_RAS_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RAS_ENA_W1C(void)
+{
+	return 0x1b8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ras_ena_w1s
+ *
+ * NPA AF RAS Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union npa_af_ras_ena_w1s {
+	u64 u;
+	struct npa_af_ras_ena_w1s_s {
+		u64 reserved_0_31                    : 32;
+		u64 aq_ctx_poison                    : 1;
+		u64 aq_res_poison                    : 1;
+		u64 aq_inst_poison                   : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct npa_af_ras_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_RAS_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RAS_ENA_W1S(void)
+{
+	return 0x1b0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_ras_w1s
+ *
+ * NPA AF RAS Interrupt Set Register This register sets interrupt bits.
+ */
+union npa_af_ras_w1s {
+	u64 u;
+	struct npa_af_ras_w1s_s {
+		u64 reserved_0_31                    : 32;
+		u64 aq_ctx_poison                    : 1;
+		u64 aq_res_poison                    : 1;
+		u64 aq_inst_poison                   : 1;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct npa_af_ras_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_RAS_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RAS_W1S(void)
+{
+	return 0x1a8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_int
+ *
+ * NPA AF RVU Interrupt Register This register contains RVU error
+ * interrupt summary bits.
+ */
+union npa_af_rvu_int {
+	u64 u;
+	struct npa_af_rvu_int_s {
+		u64 unmapped_slot                    : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_af_rvu_int_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_INT(void)
+{
+	return 0x160;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_int_ena_w1c
+ *
+ * NPA AF RVU Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_af_rvu_int_ena_w1c {
+	u64 u;
+	struct npa_af_rvu_int_ena_w1c_s {
+		u64 unmapped_slot                    : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_af_rvu_int_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_INT_ENA_W1C(void)
+{
+	return 0x178;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_int_ena_w1s
+ *
+ * NPA AF RVU Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union npa_af_rvu_int_ena_w1s {
+	u64 u;
+	struct npa_af_rvu_int_ena_w1s_s {
+		u64 unmapped_slot                    : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_af_rvu_int_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_INT_ENA_W1S(void)
+{
+	return 0x170;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_int_w1s
+ *
+ * NPA AF RVU Interrupt Set Register This register sets interrupt bits.
+ */
+union npa_af_rvu_int_w1s {
+	u64 u;
+	struct npa_af_rvu_int_w1s_s {
+		u64 unmapped_slot                    : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_af_rvu_int_w1s_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_INT_W1S(void)
+{
+	return 0x168;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_af_rvu_lf_cfg_debug
+ *
+ * NPA Privileged LF Configuration Debug Register This debug register
+ * allows software to lookup the reverse mapping from VF/PF slot to LF.
+ * The forward mapping is programmed with NPA_PRIV_LF()_CFG.
+ */
+union npa_af_rvu_lf_cfg_debug {
+	u64 u;
+	struct npa_af_rvu_lf_cfg_debug_s {
+		u64 lf                               : 12;
+		u64 lf_valid                         : 1;
+		u64 exec                             : 1;
+		u64 reserved_14_15                   : 2;
+		u64 slot                             : 8;
+		u64 pf_func                          : 16;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct npa_af_rvu_lf_cfg_debug_s cn; */
+};
+
+static inline u64 NPA_AF_RVU_LF_CFG_DEBUG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_AF_RVU_LF_CFG_DEBUG(void)
+{
+	return 0x10030;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_alloc#
+ *
+ * NPA Aura Allocate Operation Registers These registers are used to
+ * allocate one or two pointers from a given aura's pool. A 64-bit atomic
+ * load-and-add to NPA_LF_AURA_OP_ALLOC(0) allocates a single pointer. A
+ * 128-bit atomic CASP operation to NPA_LF_AURA_OP_ALLOC(0..1) allocates
+ * two pointers. The atomic write data format is NPA_AURA_OP_WDATA_S. For
+ * CASP, the first SWAP word in the write data contains
+ * NPA_AURA_OP_WDATA_S and the remaining write data words are ignored.
+ * All other accesses to this register (e.g. reads and writes) are
+ * RAZ/WI.  RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_allocx {
+	u64 u;
+	struct npa_lf_aura_op_allocx_s {
+		u64 addr                             : 64;
+	} s;
+	/* struct npa_lf_aura_op_allocx_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_ALLOCX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_ALLOCX(u64 a)
+{
+	return 0x10 + 8 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_cnt
+ *
+ * NPA LF Aura Count Register A 64-bit atomic load-and-add to this
+ * register returns a given aura's count. A write sets or adds the aura's
+ * count. A read is RAZ.  RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_cnt {
+	u64 u;
+	struct npa_lf_aura_op_cnt_s {
+		u64 count                            : 36;
+		u64 reserved_36_41                   : 6;
+		u64 op_err                           : 1;
+		u64 cnt_add                          : 1;
+		u64 aura                             : 20;
+	} s;
+	/* struct npa_lf_aura_op_cnt_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_CNT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_CNT(void)
+{
+	return 0x30;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_free0
+ *
+ * NPA LF Aura Free Operation Register 0 A 128-bit write (STP) to
+ * NPA_LF_AURA_OP_FREE0 and NPA_LF_AURA_OP_FREE1 frees a pointer into a
+ * given aura's pool. All other accesses to these registers (e.g. reads
+ * and 64-bit writes) are RAZ/WI.  RSL accesses to this register are
+ * RAZ/WI.
+ */
+union npa_lf_aura_op_free0 {
+	u64 u;
+	struct npa_lf_aura_op_free0_s {
+		u64 addr                             : 64;
+	} s;
+	/* struct npa_lf_aura_op_free0_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_FREE0(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_FREE0(void)
+{
+	return 0x20;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_free1
+ *
+ * NPA LF Aura Free Operation Register 1 See NPA_LF_AURA_OP_FREE0.  RSL
+ * accesses to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_free1 {
+	u64 u;
+	struct npa_lf_aura_op_free1_s {
+		u64 aura                             : 20;
+		u64 reserved_20_62                   : 43;
+		u64 fabs                             : 1;
+	} s;
+	/* struct npa_lf_aura_op_free1_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_FREE1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_FREE1(void)
+{
+	return 0x28;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_int
+ *
+ * NPA LF Aura Interrupt Operation Register A 64-bit atomic load-and-add
+ * to this register reads
+ * NPA_AURA_HW_S[ERR_INT,ERR_INT_ENA,THRESH_INT,THRESH_INT_ENA]. A write
+ * optionally sets or clears these fields. A read is RAZ.  RSL accesses
+ * to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_int {
+	u64 u;
+	struct npa_lf_aura_op_int_s {
+		u64 err_int                          : 8;
+		u64 err_int_ena                      : 8;
+		u64 thresh_int                       : 1;
+		u64 thresh_int_ena                   : 1;
+		u64 reserved_18_41                   : 24;
+		u64 op_err                           : 1;
+		u64 setop                            : 1;
+		u64 aura                             : 20;
+	} s;
+	/* struct npa_lf_aura_op_int_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_INT(void)
+{
+	return 0x60;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_limit
+ *
+ * NPA LF Aura Allocation Limit Register A 64-bit atomic load-and-add to
+ * this register returns a given aura's limit. A write sets the aura's
+ * limit. A read is RAZ.  RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_aura_op_limit {
+	u64 u;
+	struct npa_lf_aura_op_limit_s {
+		u64 limit                            : 36;
+		u64 reserved_36_41                   : 6;
+		u64 op_err                           : 1;
+		u64 reserved_43                      : 1;
+		u64 aura                             : 20;
+	} s;
+	/* struct npa_lf_aura_op_limit_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_LIMIT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_LIMIT(void)
+{
+	return 0x50;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_aura_op_thresh
+ *
+ * NPA LF Aura Threshold Operation Register A 64-bit atomic load-and-add
+ * to this register reads NPA_AURA_HW_S[THRESH_UP,THRESH]. A write to the
+ * register writes NPA_AURA_HW_S[THRESH_UP,THRESH] and recomputes
+ * NPA_AURA_HW_S[THRESH_INT]. A read is RAZ.  RSL accesses to this
+ * register are RAZ/WI.
+ */
+union npa_lf_aura_op_thresh {
+	u64 u;
+	struct npa_lf_aura_op_thresh_s {
+		u64 thresh                           : 36;
+		u64 reserved_36_41                   : 6;
+		u64 op_err                           : 1;
+		u64 thresh_up                        : 1;
+		u64 aura                             : 20;
+	} s;
+	/* struct npa_lf_aura_op_thresh_s cn; */
+};
+
+static inline u64 NPA_LF_AURA_OP_THRESH(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_AURA_OP_THRESH(void)
+{
+	return 0x70;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_err_int
+ *
+ * NPA LF Error Interrupt Register
+ */
+union npa_lf_err_int {
+	u64 u;
+	struct npa_lf_err_int_s {
+		u64 aura_dis                         : 1;
+		u64 aura_oor                         : 1;
+		u64 reserved_2                       : 1;
+		u64 rmt_req_oor                      : 1;
+		u64 reserved_4_11                    : 8;
+		u64 aura_fault                       : 1;
+		u64 pool_fault                       : 1;
+		u64 stack_fault                      : 1;
+		u64 qint_fault                       : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct npa_lf_err_int_s cn; */
+};
+
+static inline u64 NPA_LF_ERR_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_ERR_INT(void)
+{
+	return 0x200;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_err_int_ena_w1c
+ *
+ * NPA LF Error Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_lf_err_int_ena_w1c {
+	u64 u;
+	struct npa_lf_err_int_ena_w1c_s {
+		u64 aura_dis                         : 1;
+		u64 aura_oor                         : 1;
+		u64 reserved_2                       : 1;
+		u64 rmt_req_oor                      : 1;
+		u64 reserved_4_11                    : 8;
+		u64 aura_fault                       : 1;
+		u64 pool_fault                       : 1;
+		u64 stack_fault                      : 1;
+		u64 qint_fault                       : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct npa_lf_err_int_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_LF_ERR_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_ERR_INT_ENA_W1C(void)
+{
+	return 0x210;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_err_int_ena_w1s
+ *
+ * NPA LF Error Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union npa_lf_err_int_ena_w1s {
+	u64 u;
+	struct npa_lf_err_int_ena_w1s_s {
+		u64 aura_dis                         : 1;
+		u64 aura_oor                         : 1;
+		u64 reserved_2                       : 1;
+		u64 rmt_req_oor                      : 1;
+		u64 reserved_4_11                    : 8;
+		u64 aura_fault                       : 1;
+		u64 pool_fault                       : 1;
+		u64 stack_fault                      : 1;
+		u64 qint_fault                       : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct npa_lf_err_int_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_ERR_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_ERR_INT_ENA_W1S(void)
+{
+	return 0x218;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_err_int_w1s
+ *
+ * NPA LF Error Interrupt Set Register This register sets interrupt bits.
+ */
+union npa_lf_err_int_w1s {
+	u64 u;
+	struct npa_lf_err_int_w1s_s {
+		u64 aura_dis                         : 1;
+		u64 aura_oor                         : 1;
+		u64 reserved_2                       : 1;
+		u64 rmt_req_oor                      : 1;
+		u64 reserved_4_11                    : 8;
+		u64 aura_fault                       : 1;
+		u64 pool_fault                       : 1;
+		u64 stack_fault                      : 1;
+		u64 qint_fault                       : 1;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct npa_lf_err_int_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_ERR_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_ERR_INT_W1S(void)
+{
+	return 0x208;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_available
+ *
+ * NPA LF Pool Available Count Operation Register A 64-bit atomic load-
+ * and-add to this register returns a given pool's free pointer count.
+ * Reads and writes are RAZ/WI.  RSL accesses to this register are
+ * RAZ/WI.
+ */
+union npa_lf_pool_op_available {
+	u64 u;
+	struct npa_lf_pool_op_available_s {
+		u64 count                            : 36;
+		u64 reserved_36_41                   : 6;
+		u64 op_err                           : 1;
+		u64 reserved_43                      : 1;
+		u64 aura                             : 20;
+	} s;
+	/* struct npa_lf_pool_op_available_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_AVAILABLE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_AVAILABLE(void)
+{
+	return 0x110;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_int
+ *
+ * NPA LF Pool Interrupt Operation Register A 64-bit atomic load-and-add
+ * to this register reads
+ * NPA_POOL_S[ERR_INT,ERR_INT_ENA,THRESH_INT,THRESH_INT_ENA]. A write
+ * optionally sets or clears these fields. A read is RAZ.  RSL accesses
+ * to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_int {
+	u64 u;
+	struct npa_lf_pool_op_int_s {
+		u64 err_int                          : 8;
+		u64 err_int_ena                      : 8;
+		u64 thresh_int                       : 1;
+		u64 thresh_int_ena                   : 1;
+		u64 reserved_18_41                   : 24;
+		u64 op_err                           : 1;
+		u64 setop                            : 1;
+		u64 aura                             : 20;
+	} s;
+	/* struct npa_lf_pool_op_int_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_INT(void)
+{
+	return 0x160;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_pc
+ *
+ * NPA LF Pool Performance Count Register A 64-bit atomic load-and-add to
+ * this register reads NPA_POOL_S[OP_PC] from a given aura's pool. The
+ * aura is selected by the atomic write data, whose format is
+ * NPA_AURA_OP_WDATA_S. Reads and writes are RAZ/WI.  RSL accesses to
+ * this register are RAZ/WI.
+ */
+union npa_lf_pool_op_pc {
+	u64 u;
+	struct npa_lf_pool_op_pc_s {
+		u64 op_pc                            : 48;
+		u64 op_err                           : 1;
+		u64 reserved_49_63                   : 15;
+	} s;
+	/* struct npa_lf_pool_op_pc_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PC(void)
+{
+	return 0x100;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_ptr_end0
+ *
+ * NPA LF Pool Pointer End Operation Register 0 A 128-bit write (STP) to
+ * the NPA_LF_POOL_OP_PTR_END0 and NPA_LF_POOL_OP_PTR_END1 registers
+ * writes to a given pool's pointer end value. All other accesses to
+ * these registers (e.g. reads and 64-bit writes) are RAZ/WI.  RSL
+ * accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_ptr_end0 {
+	u64 u;
+	struct npa_lf_pool_op_ptr_end0_s {
+		u64 ptr_end                          : 64;
+	} s;
+	/* struct npa_lf_pool_op_ptr_end0_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PTR_END0(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PTR_END0(void)
+{
+	return 0x130;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_ptr_end1
+ *
+ * NPA LF Pool Pointer End Operation Register 1 See
+ * NPA_LF_POOL_OP_PTR_END0.  RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_ptr_end1 {
+	u64 u;
+	struct npa_lf_pool_op_ptr_end1_s {
+		u64 aura                             : 20;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npa_lf_pool_op_ptr_end1_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PTR_END1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PTR_END1(void)
+{
+	return 0x138;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_ptr_start0
+ *
+ * NPA LF Pool Pointer Start Operation Register 0 A 128-bit write (STP)
+ * to the NPA_LF_POOL_OP_PTR_START0 and NPA_LF_POOL_OP_PTR_START1
+ * registers writes to a given pool's pointer start value. All other
+ * accesses to these registers (e.g. reads and 64-bit writes) are RAZ/WI.
+ * RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_ptr_start0 {
+	u64 u;
+	struct npa_lf_pool_op_ptr_start0_s {
+		u64 ptr_start                        : 64;
+	} s;
+	/* struct npa_lf_pool_op_ptr_start0_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PTR_START0(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PTR_START0(void)
+{
+	return 0x120;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_ptr_start1
+ *
+ * NPA LF Pool Pointer Start Operation Register 1 See
+ * NPA_LF_POOL_OP_PTR_START0.  RSL accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_ptr_start1 {
+	u64 u;
+	struct npa_lf_pool_op_ptr_start1_s {
+		u64 aura                             : 20;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npa_lf_pool_op_ptr_start1_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_PTR_START1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_PTR_START1(void)
+{
+	return 0x128;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_pool_op_thresh
+ *
+ * NPA LF Pool Threshold Operation Register A 64-bit atomic load-and-add
+ * to this register reads NPA_POOL_S[THRESH_UP,THRESH]. A write to the
+ * register writes NPA_POOL_S[THRESH_UP,THRESH]. A read is RAZ.  RSL
+ * accesses to this register are RAZ/WI.
+ */
+union npa_lf_pool_op_thresh {
+	u64 u;
+	struct npa_lf_pool_op_thresh_s {
+		u64 thresh                           : 36;
+		u64 reserved_36_41                   : 6;
+		u64 op_err                           : 1;
+		u64 thresh_up                        : 1;
+		u64 aura                             : 20;
+	} s;
+	/* struct npa_lf_pool_op_thresh_s cn; */
+};
+
+static inline u64 NPA_LF_POOL_OP_THRESH(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_POOL_OP_THRESH(void)
+{
+	return 0x170;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_cnt
+ *
+ * NPA LF Queue Interrupt Count Registers
+ */
+union npa_lf_qintx_cnt {
+	u64 u;
+	struct npa_lf_qintx_cnt_s {
+		u64 count                            : 22;
+		u64 reserved_22_63                   : 42;
+	} s;
+	/* struct npa_lf_qintx_cnt_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_CNT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_CNT(u64 a)
+{
+	return 0x300 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_ena_w1c
+ *
+ * NPA LF Queue Interrupt Enable Clear Registers This register clears
+ * interrupt enable bits.
+ */
+union npa_lf_qintx_ena_w1c {
+	u64 u;
+	struct npa_lf_qintx_ena_w1c_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_lf_qintx_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_ENA_W1C(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_ENA_W1C(u64 a)
+{
+	return 0x330 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_ena_w1s
+ *
+ * NPA LF Queue Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union npa_lf_qintx_ena_w1s {
+	u64 u;
+	struct npa_lf_qintx_ena_w1s_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_lf_qintx_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_ENA_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_ENA_W1S(u64 a)
+{
+	return 0x320 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_int
+ *
+ * NPA LF Queue Interrupt Registers
+ */
+union npa_lf_qintx_int {
+	u64 u;
+	struct npa_lf_qintx_int_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_lf_qintx_int_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_INT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_INT(u64 a)
+{
+	return 0x310 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_qint#_int_w1s
+ *
+ * INTERNAL: NPA LF Queue Interrupt Set Registers
+ */
+union npa_lf_qintx_int_w1s {
+	u64 u;
+	struct npa_lf_qintx_int_w1s_s {
+		u64 intr                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npa_lf_qintx_int_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_QINTX_INT_W1S(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_QINTX_INT_W1S(u64 a)
+{
+	return 0x318 + 0x1000 * a;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_ras
+ *
+ * NPA LF RAS Interrupt Register
+ */
+union npa_lf_ras {
+	u64 u;
+	struct npa_lf_ras_s {
+		u64 aura_poison                      : 1;
+		u64 pool_poison                      : 1;
+		u64 stack_poison                     : 1;
+		u64 qint_poison                      : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct npa_lf_ras_s cn; */
+};
+
+static inline u64 NPA_LF_RAS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_RAS(void)
+{
+	return 0x220;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_ras_ena_w1c
+ *
+ * NPA LF RAS Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union npa_lf_ras_ena_w1c {
+	u64 u;
+	struct npa_lf_ras_ena_w1c_s {
+		u64 aura_poison                      : 1;
+		u64 pool_poison                      : 1;
+		u64 stack_poison                     : 1;
+		u64 qint_poison                      : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct npa_lf_ras_ena_w1c_s cn; */
+};
+
+static inline u64 NPA_LF_RAS_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_RAS_ENA_W1C(void)
+{
+	return 0x230;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_ras_ena_w1s
+ *
+ * NPA LF RAS Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union npa_lf_ras_ena_w1s {
+	u64 u;
+	struct npa_lf_ras_ena_w1s_s {
+		u64 aura_poison                      : 1;
+		u64 pool_poison                      : 1;
+		u64 stack_poison                     : 1;
+		u64 qint_poison                      : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct npa_lf_ras_ena_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_RAS_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_RAS_ENA_W1S(void)
+{
+	return 0x238;
+}
+
+/**
+ * Register (RVU_PFVF_BAR2) npa_lf_ras_w1s
+ *
+ * NPA LF RAS Interrupt Set Register This register sets interrupt bits.
+ */
+union npa_lf_ras_w1s {
+	u64 u;
+	struct npa_lf_ras_w1s_s {
+		u64 aura_poison                      : 1;
+		u64 pool_poison                      : 1;
+		u64 stack_poison                     : 1;
+		u64 qint_poison                      : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct npa_lf_ras_w1s_s cn; */
+};
+
+static inline u64 NPA_LF_RAS_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_LF_RAS_W1S(void)
+{
+	return 0x228;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_priv_af_int_cfg
+ *
+ * NPA Privileged AF Interrupt Configuration Register
+ */
+union npa_priv_af_int_cfg {
+	u64 u;
+	struct npa_priv_af_int_cfg_s {
+		u64 msix_offset                      : 11;
+		u64 reserved_11                      : 1;
+		u64 msix_size                        : 8;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npa_priv_af_int_cfg_s cn; */
+};
+
+static inline u64 NPA_PRIV_AF_INT_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_PRIV_AF_INT_CFG(void)
+{
+	return 0x10000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_priv_lf#_cfg
+ *
+ * NPA Privileged Local Function Configuration Registers These registers
+ * allow each NPA local function (LF) to be provisioned to a VF/PF slot
+ * for RVU. See also NPA_AF_RVU_LF_CFG_DEBUG.  Software should read this
+ * register after write to ensure that the LF is mapped to [PF_FUNC]
+ * before issuing transactions to the mapped PF and function.  [SLOT]
+ * must be zero.  Internal: Hardware ignores [SLOT] and always assumes
+ * 0x0.
+ */
+union npa_priv_lfx_cfg {
+	u64 u;
+	struct npa_priv_lfx_cfg_s {
+		u64 slot                             : 8;
+		u64 pf_func                          : 16;
+		u64 reserved_24_62                   : 39;
+		u64 ena                              : 1;
+	} s;
+	/* struct npa_priv_lfx_cfg_s cn; */
+};
+
+static inline u64 NPA_PRIV_LFX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_PRIV_LFX_CFG(u64 a)
+{
+	return 0x10010 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npa_priv_lf#_int_cfg
+ *
+ * NPA Privileged LF Interrupt Configuration Registers
+ */
+union npa_priv_lfx_int_cfg {
+	u64 u;
+	struct npa_priv_lfx_int_cfg_s {
+		u64 msix_offset                      : 11;
+		u64 reserved_11                      : 1;
+		u64 msix_size                        : 8;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npa_priv_lfx_int_cfg_s cn; */
+};
+
+static inline u64 NPA_PRIV_LFX_INT_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPA_PRIV_LFX_INT_CFG(u64 a)
+{
+	return 0x10020 + 0x100 * a;
+}
+
+#endif /* __CSRS_NPA_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-npc.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-npc.h
new file mode 100644
index 000000000..c1c4baabe
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-npc.h
@@ -0,0 +1,1629 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_NPC_H__
+#define __CSRS_NPC_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * NPC.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Enumeration npc_errlev_e
+ *
+ * NPC Error Level Enumeration Enumerates the lowest protocol layer
+ * containing an error.
+ */
+#define NPC_ERRLEV_E_LA (1)
+#define NPC_ERRLEV_E_LB (2)
+#define NPC_ERRLEV_E_LC (3)
+#define NPC_ERRLEV_E_LD (4)
+#define NPC_ERRLEV_E_LE (5)
+#define NPC_ERRLEV_E_LF (6)
+#define NPC_ERRLEV_E_LG (7)
+#define NPC_ERRLEV_E_LH (8)
+#define NPC_ERRLEV_E_NIX (0xf)
+#define NPC_ERRLEV_E_RX(a) (0 + (a))
+#define NPC_ERRLEV_E_RE (0)
+
+/**
+ * Enumeration npc_intf_e
+ *
+ * NPC Interface Enumeration Enumerates the NPC interfaces.
+ */
+#define NPC_INTF_E_NIXX_RX(a) (0 + 2 * (a))
+#define NPC_INTF_E_NIXX_TX(a) (1 + 2 * (a))
+
+/**
+ * Enumeration npc_lid_e
+ *
+ * NPC Layer ID Enumeration Enumerates layers parsed by NPC.
+ */
+#define NPC_LID_E_LA (0)
+#define NPC_LID_E_LB (1)
+#define NPC_LID_E_LC (2)
+#define NPC_LID_E_LD (3)
+#define NPC_LID_E_LE (4)
+#define NPC_LID_E_LF (5)
+#define NPC_LID_E_LG (6)
+#define NPC_LID_E_LH (7)
+
+/**
+ * Enumeration npc_lkupop_e
+ *
+ * NPC Lookup Operation Enumeration Enumerates the lookup operation for
+ * NPC_AF_LKUP_CTL[OP].
+ */
+#define NPC_LKUPOP_E_KEY (1)
+#define NPC_LKUPOP_E_PKT (0)
+
+/**
+ * Enumeration npc_mcamkeyw_e
+ *
+ * NPC MCAM Search Key Width Enumeration
+ */
+#define NPC_MCAMKEYW_E_X1 (0)
+#define NPC_MCAMKEYW_E_X2 (1)
+#define NPC_MCAMKEYW_E_X4 (2)
+
+/**
+ * Structure npc_layer_info_s
+ *
+ * NPC Layer Parse Information Structure This structure specifies the
+ * format of NPC_RESULT_S[LA,LB,...,LH].
+ */
+union npc_layer_info_s {
+	u32 u;
+	struct npc_layer_info_s_s {
+		u32 lptr                             : 8;
+		u32 flags                            : 8;
+		u32 ltype                            : 4;
+		u32 reserved_20_31                   : 12;
+	} s;
+	/* struct npc_layer_info_s_s cn; */
+};
+
+/**
+ * Structure npc_layer_kex_s
+ *
+ * NPC Layer MCAM Search Key Extract Structure This structure specifies
+ * the format of each of the NPC_PARSE_KEX_S[LA,LB,...,LH] fields. It
+ * contains the subset of NPC_LAYER_INFO_S fields that can be included in
+ * the MCAM search key. See NPC_PARSE_KEX_S and NPC_AF_INTF()_KEX_CFG.
+ */
+union npc_layer_kex_s {
+	u32 u;
+	struct npc_layer_kex_s_s {
+		u32 flags                            : 8;
+		u32 ltype                            : 4;
+		u32 reserved_12_31                   : 20;
+	} s;
+	/* struct npc_layer_kex_s_s cn; */
+};
+
+/**
+ * Structure npc_mcam_key_x1_s
+ *
+ * NPC MCAM Search Key X1 Structure This structure specifies the MCAM
+ * search key format used by an interface when
+ * NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X1.
+ */
+union npc_mcam_key_x1_s {
+	u64 u[3];
+	struct npc_mcam_key_x1_s_s {
+		u64 intf                             : 2;
+		u64 reserved_2_63                    : 62;
+		u64 kw0                              : 64;
+		u64 kw1                              : 48;
+		u64 reserved_176_191                 : 16;
+	} s;
+	/* struct npc_mcam_key_x1_s_s cn; */
+};
+
+/**
+ * Structure npc_mcam_key_x2_s
+ *
+ * NPC MCAM Search Key X2 Structure This structure specifies the MCAM
+ * search key format used by an interface when
+ * NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X2.
+ */
+union npc_mcam_key_x2_s {
+	u64 u[5];
+	struct npc_mcam_key_x2_s_s {
+		u64 intf                             : 2;
+		u64 reserved_2_63                    : 62;
+		u64 kw0                              : 64;
+		u64 kw1                              : 64;
+		u64 kw2                              : 64;
+		u64 kw3                              : 32;
+		u64 reserved_288_319                 : 32;
+	} s;
+	/* struct npc_mcam_key_x2_s_s cn; */
+};
+
+/**
+ * Structure npc_mcam_key_x4_s
+ *
+ * NPC MCAM Search Key X4 Structure This structure specifies the MCAM
+ * search key format used by an interface when
+ * NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X4.
+ */
+union npc_mcam_key_x4_s {
+	u64 u[8];
+	struct npc_mcam_key_x4_s_s {
+		u64 intf                             : 2;
+		u64 reserved_2_63                    : 62;
+		u64 kw0                              : 64;
+		u64 kw1                              : 64;
+		u64 kw2                              : 64;
+		u64 kw3                              : 64;
+		u64 kw4                              : 64;
+		u64 kw5                              : 64;
+		u64 kw6                              : 64;
+	} s;
+	/* struct npc_mcam_key_x4_s_s cn; */
+};
+
+/**
+ * Structure npc_parse_kex_s
+ *
+ * NPC Parse Key Extract Structure This structure contains the subset of
+ * NPC_RESULT_S fields that can be included in the MCAM search key. See
+ * NPC_AF_INTF()_KEX_CFG.
+ */
+union npc_parse_kex_s {
+	u64 u[2];
+	struct npc_parse_kex_s_s {
+		u64 chan                             : 12;
+		u64 errlev                           : 4;
+		u64 errcode                          : 8;
+		u64 l2m                              : 1;
+		u64 l2b                              : 1;
+		u64 l3m                              : 1;
+		u64 l3b                              : 1;
+		u64 la                               : 12;
+		u64 lb                               : 12;
+		u64 lc                               : 12;
+		u64 ld                               : 12;
+		u64 le                               : 12;
+		u64 lf                               : 12;
+		u64 lg                               : 12;
+		u64 lh                               : 12;
+		u64 reserved_124_127                 : 4;
+	} s;
+	/* struct npc_parse_kex_s_s cn; */
+};
+
+/**
+ * Structure npc_result_s
+ *
+ * NPC Result Structure This structure contains a packet's parse and flow
+ * identification information.
+ */
+union npc_result_s {
+	u64 u[6];
+	struct npc_result_s_s {
+		u64 intf                             : 2;
+		u64 pkind                            : 6;
+		u64 chan                             : 12;
+		u64 errlev                           : 4;
+		u64 errcode                          : 8;
+		u64 l2m                              : 1;
+		u64 l2b                              : 1;
+		u64 l3m                              : 1;
+		u64 l3b                              : 1;
+		u64 eoh_ptr                          : 8;
+		u64 reserved_44_63                   : 20;
+		u64 action                           : 64;
+		u64 vtag_action                      : 64;
+		u64 la                               : 20;
+		u64 lb                               : 20;
+		u64 lc                               : 20;
+		u64 reserved_252_255                 : 4;
+		u64 ld                               : 20;
+		u64 le                               : 20;
+		u64 lf                               : 20;
+		u64 reserved_316_319                 : 4;
+		u64 lg                               : 20;
+		u64 lh                               : 20;
+		u64 reserved_360_383                 : 24;
+	} s;
+	/* struct npc_result_s_s cn; */
+};
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_active_pc
+ *
+ * NPC Interrupt-Timer Configuration Register
+ */
+union npc_af_active_pc {
+	u64 u;
+	struct npc_af_active_pc_s {
+		u64 active_pc                        : 64;
+	} s;
+	/* struct npc_af_active_pc_s cn; */
+};
+
+static inline u64 NPC_AF_ACTIVE_PC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_ACTIVE_PC(void)
+{
+	return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_blk_rst
+ *
+ * NPC AF Block Reset Register
+ */
+union npc_af_blk_rst {
+	u64 u;
+	struct npc_af_blk_rst_s {
+		u64 rst                              : 1;
+		u64 reserved_1_62                    : 62;
+		u64 busy                             : 1;
+	} s;
+	/* struct npc_af_blk_rst_s cn; */
+};
+
+static inline u64 NPC_AF_BLK_RST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_BLK_RST(void)
+{
+	return 0x40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_cfg
+ *
+ * NPC AF General Configuration Register
+ */
+union npc_af_cfg {
+	u64 u;
+	struct npc_af_cfg_s {
+		u64 reserved_0_1                     : 2;
+		u64 cclk_force                       : 1;
+		u64 force_intf_clk_en                : 1;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct npc_af_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_CFG(void)
+{
+	return 0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_const
+ *
+ * NPC AF Constants Register This register contains constants for
+ * software discovery.
+ */
+union npc_af_const {
+	u64 u;
+	struct npc_af_const_s {
+		u64 intfs                            : 4;
+		u64 lids                             : 4;
+		u64 kpus                             : 5;
+		u64 reserved_13_15                   : 3;
+		u64 mcam_bank_width                  : 10;
+		u64 reserved_26_27                   : 2;
+		u64 mcam_bank_depth                  : 16;
+		u64 mcam_banks                       : 4;
+		u64 match_stats                      : 16;
+	} s;
+	/* struct npc_af_const_s cn; */
+};
+
+static inline u64 NPC_AF_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_CONST(void)
+{
+	return 0x20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_const1
+ *
+ * NPC AF Constants 1 Register This register contains constants for
+ * software discovery.
+ */
+union npc_af_const1 {
+	u64 u;
+	struct npc_af_const1_s {
+		u64 kpu_entries                      : 12;
+		u64 pkinds                           : 8;
+		u64 cpi_size                         : 16;
+		u64 reserved_36_63                   : 28;
+	} s;
+	/* struct npc_af_const1_s cn; */
+};
+
+static inline u64 NPC_AF_CONST1(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_CONST1(void)
+{
+	return 0x30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_cpi#_cfg
+ *
+ * NPC AF Channel Parse Index Table Registers
+ */
+union npc_af_cpix_cfg {
+	u64 u;
+	struct npc_af_cpix_cfg_s {
+		u64 padd                             : 4;
+		u64 reserved_4_63                    : 60;
+	} s;
+	/* struct npc_af_cpix_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_CPIX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_CPIX_CFG(u64 a)
+{
+	return 0x200000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dbg_ctl
+ *
+ * NPC AF Debug Control Register This register controls the capture of
+ * debug information in NPC_AF_KPU()_DBG, NPC_AF_MCAM_DBG,
+ * NPC_AF_DBG_DATA() and NPC_AF_DBG_RESULT().
+ */
+union npc_af_dbg_ctl {
+	u64 u;
+	struct npc_af_dbg_ctl_s {
+		u64 continuous                       : 1;
+		u64 lkup_dbg                         : 1;
+		u64 intf_dbg                         : 4;
+		u64 reserved_6_63                    : 58;
+	} s;
+	/* struct npc_af_dbg_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_DBG_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DBG_CTL(void)
+{
+	return 0x3000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dbg_data#
+ *
+ * NPC AF Debug Data Registers These registers contain the packet header
+ * data of the last packet/lookup whose debug information is captured by
+ * NPC_AF_DBG_CTL[INTF_DBG,LKUP_DBG].
+ */
+union npc_af_dbg_datax {
+	u64 u;
+	struct npc_af_dbg_datax_s {
+		u64 data                             : 64;
+	} s;
+	/* struct npc_af_dbg_datax_s cn; */
+};
+
+static inline u64 NPC_AF_DBG_DATAX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DBG_DATAX(u64 a)
+{
+	return 0x3001400 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dbg_result#
+ *
+ * NPC AF Debug Result Registers These registers contain the result data
+ * of the last packet/lookup whose debug information is captured by
+ * NPC_AF_DBG_CTL[INTF_DBG,LKUP_DBG].  Internal: FIXME - add note about
+ * coherency of data in continuous packet capture mode.
+ */
+union npc_af_dbg_resultx {
+	u64 u;
+	struct npc_af_dbg_resultx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct npc_af_dbg_resultx_s cn; */
+};
+
+static inline u64 NPC_AF_DBG_RESULTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DBG_RESULTX(u64 a)
+{
+	return 0x3001800 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dbg_status
+ *
+ * NPC AF Debug Status Register
+ */
+union npc_af_dbg_status {
+	u64 u;
+	struct npc_af_dbg_status_s {
+		u64 done                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npc_af_dbg_status_s cn; */
+};
+
+static inline u64 NPC_AF_DBG_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DBG_STATUS(void)
+{
+	return 0x3000010;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_dv_fc_scratch
+ *
+ * INTERNAL: NPC AF Scratch Register  Internal: This register is for
+ * internal DV purpose.
+ */
+union npc_af_dv_fc_scratch {
+	u64 u;
+	struct npc_af_dv_fc_scratch_s {
+		u64 it                               : 64;
+	} s;
+	/* struct npc_af_dv_fc_scratch_s cn; */
+};
+
+static inline u64 NPC_AF_DV_FC_SCRATCH(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_DV_FC_SCRATCH(void)
+{
+	return 0x60;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_eco0
+ *
+ * INTERNAL: ECO 0 Register
+ */
+union npc_af_eco0 {
+	u64 u;
+	struct npc_af_eco0_s {
+		u64 eco_rw                           : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct npc_af_eco0_s cn; */
+};
+
+static inline u64 NPC_AF_ECO0(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_ECO0(void)
+{
+	return 0x200;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_ikpu_err_ctl
+ *
+ * NPC AF Initial KPU Error Control Registers Similar to
+ * NPC_AF_KPU()_ERR_CTL, but specifies values captured in
+ * NPC_RESULT_S[ERRLEV,ERRCODE] for errors detected by the PKIND-based
+ * initial actions from NPC_AF_PKIND()_ACTION0 and
+ * NPC_AF_PKIND()_ACTION1. [DP_OFFSET_ERRCODE] from this register is
+ * never used.
+ */
+union npc_af_ikpu_err_ctl {
+	u64 u;
+	struct npc_af_ikpu_err_ctl_s {
+		u64 errlev                           : 4;
+		u64 dp_offset_errcode                : 8;
+		u64 ptr_advance_errcode              : 8;
+		u64 var_len_offset_errcode           : 8;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct npc_af_ikpu_err_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_IKPU_ERR_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_IKPU_ERR_CTL(void)
+{
+	return 0x3000080;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_kex_cfg
+ *
+ * NPC AF Interface Key Extract Configuration Registers
+ */
+union npc_af_intfx_kex_cfg {
+	u64 u;
+	struct npc_af_intfx_kex_cfg_s {
+		u64 parse_nibble_ena                 : 31;
+		u64 reserved_31                      : 1;
+		u64 keyw                             : 3;
+		u64 reserved_35_63                   : 29;
+	} s;
+	/* struct npc_af_intfx_kex_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_KEX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_KEX_CFG(u64 a)
+{
+	return 0x1010 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_ldata#_flags#_cfg
+ *
+ * NPC AF Interface Layer Data Flags Configuration Registers These
+ * registers control the extraction of layer data (LDATA) into the MCAM
+ * search key for each interface based on the FLAGS\<3:0\> bits of two
+ * layers selected by NPC_AF_KEX_LDATA()_FLAGS_CFG.
+ */
+union npc_af_intfx_ldatax_flagsx_cfg {
+	u64 u;
+	struct npc_af_intfx_ldatax_flagsx_cfg_s {
+		u64 key_offset                       : 6;
+		u64 reserved_6                       : 1;
+		u64 ena                              : 1;
+		u64 hdr_offset                       : 8;
+		u64 bytesm1                          : 4;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npc_af_intfx_ldatax_flagsx_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_LDATAX_FLAGSX_CFG(u64 a, u64 b, u64 c)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_LDATAX_FLAGSX_CFG(u64 a, u64 b, u64 c)
+{
+	return 0x980000 + 0x10000 * a + 0x1000 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_lid#_lt#_ld#_cfg
+ *
+ * NPC AF Interface Layer Data Extract Configuration Registers These
+ * registers control the extraction of layer data (LDATA) into the MCAM
+ * search key for each interface. Up to two LDATA fields can be extracted
+ * per layer (LID(0..7) indexed by NPC_LID_E), with up to 16 bytes per
+ * LDATA field. For each layer, the corresponding NPC_LAYER_INFO_S[LTYPE]
+ * value in NPC_RESULT_S is used as the LTYPE(0..15) index and select the
+ * associated LDATA(0..1) registers.  NPC_LAYER_INFO_S[LTYPE]=0x0 means
+ * the corresponding layer not parsed (invalid), so software should keep
+ * NPC_AF_INTF()_LID()_LT(0)_LD()_CFG[ENA] clear to disable extraction
+ * when LTYPE is zero.
+ */
+union npc_af_intfx_lidx_ltx_ldx_cfg {
+	u64 u;
+	struct npc_af_intfx_lidx_ltx_ldx_cfg_s {
+		u64 key_offset                       : 6;
+		u64 flags_ena                        : 1;
+		u64 ena                              : 1;
+		u64 hdr_offset                       : 8;
+		u64 bytesm1                          : 4;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npc_af_intfx_lidx_ltx_ldx_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_LIDX_LTX_LDX_CFG(u64 a, u64 b, u64 c, u64 d)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_LIDX_LTX_LDX_CFG(u64 a, u64 b, u64 c, u64 d)
+{
+	return 0x900000 + 0x10000 * a + 0x1000 * b + 0x20 * c + 8 * d;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_miss_act
+ *
+ * NPC AF Interface MCAM Miss Action Data Registers When a combination of
+ * NPC_AF_MCAME()_BANK()_CAM()_* and NPC_AF_MCAME()_BANK()_CFG[ENA]
+ * yields an MCAM miss for a packet, this register specifies the packet's
+ * match action captured in NPC_RESULT_S[ACTION].
+ */
+union npc_af_intfx_miss_act {
+	u64 u;
+	struct npc_af_intfx_miss_act_s {
+		u64 action                           : 64;
+	} s;
+	/* struct npc_af_intfx_miss_act_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_MISS_ACT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_MISS_ACT(u64 a)
+{
+	return 0x1a00000 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_miss_stat_act
+ *
+ * NPC AF Interface MCAM Miss Stat Action Data Registers Used to
+ * optionally increment a NPC_AF_MATCH_STAT() counter when a packet
+ * misses an MCAM entry.
+ */
+union npc_af_intfx_miss_stat_act {
+	u64 u;
+	struct npc_af_intfx_miss_stat_act_s {
+		u64 stat_sel                         : 9;
+		u64 ena                              : 1;
+		u64 reserved_10_63                   : 54;
+	} s;
+	/* struct npc_af_intfx_miss_stat_act_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_MISS_STAT_ACT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_MISS_STAT_ACT(u64 a)
+{
+	return 0x1880040 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_miss_tag_act
+ *
+ * NPC AF Interface MCAM Miss VTag Action Data Registers When a
+ * combination of NPC_AF_MCAME()_BANK()_CAM()_* and
+ * NPC_AF_MCAME()_BANK()_CFG[ENA] yields an MCAM miss for a packet, this
+ * register specifies the packet's match Vtag action captured in
+ * NPC_RESULT_S[VTAG_ACTION].
+ */
+union npc_af_intfx_miss_tag_act {
+	u64 u;
+	struct npc_af_intfx_miss_tag_act_s {
+		u64 vtag_action                      : 64;
+	} s;
+	/* struct npc_af_intfx_miss_tag_act_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_MISS_TAG_ACT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_MISS_TAG_ACT(u64 a)
+{
+	return 0x1b00008 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_intf#_stat
+ *
+ * NPC AF Interface Statistics Registers Statistics per interface. Index
+ * enumerated by NPC_INTF_E.
+ */
+union npc_af_intfx_stat {
+	u64 u;
+	struct npc_af_intfx_stat_s {
+		u64 count                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct npc_af_intfx_stat_s cn; */
+};
+
+static inline u64 NPC_AF_INTFX_STAT(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_INTFX_STAT(u64 a)
+{
+	return 0x2000800 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kcam_scrub_ctl
+ *
+ * NPC AF KCAM Scrub Control Register
+ */
+union npc_af_kcam_scrub_ctl {
+	u64 u;
+	struct npc_af_kcam_scrub_ctl_s {
+		u64 ena                              : 1;
+		u64 reserved_1_7                     : 7;
+		u64 lp_dis                           : 1;
+		u64 reserved_9_15                    : 7;
+		u64 toth                             : 4;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npc_af_kcam_scrub_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_KCAM_SCRUB_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KCAM_SCRUB_CTL(void)
+{
+	return 0xb0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kex_ldata#_flags_cfg
+ *
+ * NPC AF Key Extract Layer Data Flags Configuration Register
+ */
+union npc_af_kex_ldatax_flags_cfg {
+	u64 u;
+	struct npc_af_kex_ldatax_flags_cfg_s {
+		u64 lid                              : 3;
+		u64 reserved_3_63                    : 61;
+	} s;
+	/* struct npc_af_kex_ldatax_flags_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_KEX_LDATAX_FLAGS_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KEX_LDATAX_FLAGS_CFG(u64 a)
+{
+	return 0x800 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_cfg
+ *
+ * NPC AF KPU Configuration Registers
+ */
+union npc_af_kpux_cfg {
+	u64 u;
+	struct npc_af_kpux_cfg_s {
+		u64 ena                              : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npc_af_kpux_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_CFG(u64 a)
+{
+	return 0x500 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_dbg
+ *
+ * NPC AF KPU Debug Registers This register contains information for the
+ * last packet/lookup for which debug is enabled by
+ * NPC_AF_DBG_CTL[INTF_DBG,LKUP_DBG]. The register contents are undefined
+ * when debug information is captured for a software key lookup
+ * (NPC_AF_LKUP_CTL[OP] = NPC_LKUPOP_E::KEY).
+ */
+union npc_af_kpux_dbg {
+	u64 u;
+	struct npc_af_kpux_dbg_s {
+		u64 hit_entry                        : 8;
+		u64 byp                              : 1;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct npc_af_kpux_dbg_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_DBG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_DBG(u64 a)
+{
+	return 0x3000020 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_entry#_action0
+ *
+ * NPC AF KPU Entry Action Data 0 Registers When a KPU's search data
+ * matches a KPU CAM entry in NPC_AF_KPU()_ENTRY()_CAM(), the
+ * corresponding entry action in NPC_AF_KPU()_ENTRY()_ACTION0 and
+ * NPC_AF_KPU()_ENTRY()_ACTION1 specifies the next state and operations
+ * to perform before exiting the KPU.
+ */
+union npc_af_kpux_entryx_action0 {
+	u64 u;
+	struct npc_af_kpux_entryx_action0_s {
+		u64 var_len_shift                    : 3;
+		u64 var_len_right                    : 1;
+		u64 var_len_mask                     : 8;
+		u64 var_len_offset                   : 8;
+		u64 ptr_advance                      : 8;
+		u64 capture_flags                    : 8;
+		u64 capture_ltype                    : 4;
+		u64 capture_lid                      : 3;
+		u64 reserved_43                      : 1;
+		u64 next_state                       : 8;
+		u64 parse_done                       : 1;
+		u64 capture_ena                      : 1;
+		u64 byp_count                        : 3;
+		u64 reserved_57_63                   : 7;
+	} s;
+	/* struct npc_af_kpux_entryx_action0_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ENTRYX_ACTION0(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ENTRYX_ACTION0(u64 a, u64 b)
+{
+	return 0x100020 + 0x4000 * a + 0x40 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_entry#_action1
+ *
+ * NPC AF KPU Entry Action Data 0 Registers See
+ * NPC_AF_KPU()_ENTRY()_ACTION0.
+ */
+union npc_af_kpux_entryx_action1 {
+	u64 u;
+	struct npc_af_kpux_entryx_action1_s {
+		u64 dp0_offset                       : 8;
+		u64 dp1_offset                       : 8;
+		u64 dp2_offset                       : 8;
+		u64 errcode                          : 8;
+		u64 errlev                           : 4;
+		u64 reserved_36_63                   : 28;
+	} s;
+	/* struct npc_af_kpux_entryx_action1_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ENTRYX_ACTION1(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ENTRYX_ACTION1(u64 a, u64 b)
+{
+	return 0x100028 + 0x4000 * a + 0x40 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_entry#_cam#
+ *
+ * NPC AF KPU Entry CAM Registers KPU comparison ternary data. The field
+ * values in NPC_AF_KPU()_ENTRY()_CAM() are ternary, where  each data bit
+ * of the search key matches as follows: _ [CAM(1)]\<n\>=0,
+ * [CAM(0)]\<n\>=0: Always match; search key data\<n\> don't care. _
+ * [CAM(1)]\<n\>=0, [CAM(0)]\<n\>=1: Match when search key data\<n\> ==
+ * 0. _ [CAM(1)]\<n\>=1, [CAM(0)]\<n\>=0: Match when search key data\<n\>
+ * == 1. _ [CAM(1)]\<n\>=1, [CAM(0)]\<n\>=1: Reserved.  The reserved
+ * combination is not allowed. Hardware suppresses any write to CAM(0) or
+ * CAM(1) that would result in the reserved combination for any CAM bit.
+ * The reset value for all non-reserved fields is all zeros for CAM(1)
+ * and all ones for CAM(0), matching a search key of all zeros.  Software
+ * must program a default entry for each KPU, e.g. by programming each
+ * KPU's last entry {b} (NPC_AF_KPU()_ENTRY({b})_CAM()) to always match
+ * all bits.
+ */
+union npc_af_kpux_entryx_camx {
+	u64 u;
+	struct npc_af_kpux_entryx_camx_s {
+		u64 dp0_data                         : 16;
+		u64 dp1_data                         : 16;
+		u64 dp2_data                         : 16;
+		u64 state                            : 8;
+		u64 reserved_56_63                   : 8;
+	} s;
+	/* struct npc_af_kpux_entryx_camx_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ENTRYX_CAMX(u64 a, u64 b, u64 c)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ENTRYX_CAMX(u64 a, u64 b, u64 c)
+{
+	return 0x100000 + 0x4000 * a + 0x40 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_entry_dis#
+ *
+ * NPC AF KPU Entry Disable Registers See NPC_AF_KPU()_ENTRY()_ACTION0.
+ */
+union npc_af_kpux_entry_disx {
+	u64 u;
+	struct npc_af_kpux_entry_disx_s {
+		u64 dis                              : 64;
+	} s;
+	/* struct npc_af_kpux_entry_disx_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ENTRY_DISX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ENTRY_DISX(u64 a, u64 b)
+{
+	return 0x180000 + 0x40 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu#_err_ctl
+ *
+ * NPC AF KPU Error Control Registers This register specifies values
+ * captured in NPC_RESULT_S[ERRLEV,ERRCODE] when errors are detected by a
+ * KPU.
+ */
+union npc_af_kpux_err_ctl {
+	u64 u;
+	struct npc_af_kpux_err_ctl_s {
+		u64 errlev                           : 4;
+		u64 dp_offset_errcode                : 8;
+		u64 ptr_advance_errcode              : 8;
+		u64 var_len_offset_errcode           : 8;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct npc_af_kpux_err_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_KPUX_ERR_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPUX_ERR_CTL(u64 a)
+{
+	return 0x30000a0 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_kpu_diag
+ *
+ * INTERNAL : NPC AF Debug Result Registers
+ */
+union npc_af_kpu_diag {
+	u64 u;
+	struct npc_af_kpu_diag_s {
+		u64 skip_dis                         : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npc_af_kpu_diag_s cn; */
+};
+
+static inline u64 NPC_AF_KPU_DIAG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_KPU_DIAG(void)
+{
+	return 0x3002000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_lkup_ctl
+ *
+ * NPC AF Software Lookup Control Registers
+ */
+union npc_af_lkup_ctl {
+	u64 u;
+	struct npc_af_lkup_ctl_s {
+		u64 intf                             : 2;
+		u64 pkind                            : 6;
+		u64 chan                             : 12;
+		u64 hdr_sizem1                       : 8;
+		u64 op                               : 3;
+		u64 exec                             : 1;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct npc_af_lkup_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_LKUP_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_LKUP_CTL(void)
+{
+	return 0x2000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_lkup_data#
+ *
+ * NPC AF Software Lookup Data Registers
+ */
+union npc_af_lkup_datax {
+	u64 u;
+	struct npc_af_lkup_datax_s {
+		u64 data                             : 64;
+	} s;
+	/* struct npc_af_lkup_datax_s cn; */
+};
+
+static inline u64 NPC_AF_LKUP_DATAX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_LKUP_DATAX(u64 a)
+{
+	return 0x2000200 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_lkup_result#
+ *
+ * NPC AF Software Lookup Result Registers
+ */
+union npc_af_lkup_resultx {
+	u64 u;
+	struct npc_af_lkup_resultx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct npc_af_lkup_resultx_s cn; */
+};
+
+static inline u64 NPC_AF_LKUP_RESULTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_LKUP_RESULTX(u64 a)
+{
+	return 0x2000400 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_match_stat#
+ *
+ * NPC AF Match Statistics Registers
+ */
+union npc_af_match_statx {
+	u64 u;
+	struct npc_af_match_statx_s {
+		u64 count                            : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct npc_af_match_statx_s cn; */
+};
+
+static inline u64 NPC_AF_MATCH_STATX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MATCH_STATX(u64 a)
+{
+	return 0x1880008 + 0x100 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcam_bank#_hit#
+ *
+ * NPC AF MCAM Bank Hit Registers
+ */
+union npc_af_mcam_bankx_hitx {
+	u64 u;
+	struct npc_af_mcam_bankx_hitx_s {
+		u64 hit                              : 64;
+	} s;
+	/* struct npc_af_mcam_bankx_hitx_s cn; */
+};
+
+static inline u64 NPC_AF_MCAM_BANKX_HITX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAM_BANKX_HITX(u64 a, u64 b)
+{
+	return 0x1c80000 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcam_dbg
+ *
+ * NPC AF MCAM Debug Register This register contains information for the
+ * last packet/lookup for which debug is enabled by
+ * NPC_AF_DBG_CTL[INTF_DBG,LKUP_DBG].
+ */
+union npc_af_mcam_dbg {
+	u64 u;
+	struct npc_af_mcam_dbg_s {
+		u64 hit_entry                        : 10;
+		u64 reserved_10_11                   : 2;
+		u64 hit_bank                         : 2;
+		u64 reserved_14_15                   : 2;
+		u64 miss                             : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct npc_af_mcam_dbg_s cn; */
+};
+
+static inline u64 NPC_AF_MCAM_DBG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAM_DBG(void)
+{
+	return 0x3001000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcam_scrub_ctl
+ *
+ * NPC AF MCAM Scrub Control Register
+ */
+union npc_af_mcam_scrub_ctl {
+	u64 u;
+	struct npc_af_mcam_scrub_ctl_s {
+		u64 ena                              : 1;
+		u64 reserved_1_7                     : 7;
+		u64 lp_dis                           : 1;
+		u64 reserved_9_15                    : 7;
+		u64 toth                             : 4;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct npc_af_mcam_scrub_ctl_s cn; */
+};
+
+static inline u64 NPC_AF_MCAM_SCRUB_CTL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAM_SCRUB_CTL(void)
+{
+	return 0xa0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_action
+ *
+ * NPC AF MCAM Entry Bank Action Data Registers Specifies a packet's
+ * match action captured in NPC_RESULT_S[ACTION].  When an interface is
+ * configured to use the NPC_MCAM_KEY_X2_S search key format
+ * (NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X2), *
+ * NPC_AF_MCAME()_BANK(0)_ACTION/_TAG_ACT/_STAT_ACT are used if the
+ * search key matches NPC_AF_MCAME()_BANK(0..1)_CAM()_W*. *
+ * NPC_AF_MCAME()_BANK(2)_ACTION/_TAG_ACT/_STAT_ACT are used if the
+ * search key matches NPC_AF_MCAME()_BANK(2..3)_CAM()_W*. *
+ * NPC_AF_MCAME()_BANK(1,3)_ACTION/_TAG_ACT/_STAT_ACT are not used.  When
+ * an interface is configured to use the NPC_MCAM_KEY_X4_S search key
+ * format (NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X4): *
+ * NPC_AF_MCAME()_BANK(0)_ACTION/_TAG_ACT/_STAT_ACT are used if the
+ * search key matches NPC_AF_MCAME()_BANK(0..3)_CAM()_W*. *
+ * NPC_AF_MCAME()_BANK(1..3)_ACTION/_TAG_ACT/_STAT_ACT are not used.
+ */
+union npc_af_mcamex_bankx_action {
+	u64 u;
+	struct npc_af_mcamex_bankx_action_s {
+		u64 action                           : 64;
+	} s;
+	/* struct npc_af_mcamex_bankx_action_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_ACTION(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_ACTION(u64 a, u64 b)
+{
+	return 0x1900000 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_cam#_intf
+ *
+ * NPC AF MCAM Entry Bank CAM Data Interface Registers MCAM comparison
+ * ternary data interface word. The field values in
+ * NPC_AF_MCAME()_BANK()_CAM()_INTF, NPC_AF_MCAME()_BANK()_CAM()_W0 and
+ * NPC_AF_MCAME()_BANK()_CAM()_W1 are ternary, where  each data bit of
+ * the search key matches as follows: _ [CAM(1)]\<n\>=0, [CAM(0)]\<n\>=0:
+ * Always match; search key data\<n\> don't care. _ [CAM(1)]\<n\>=0,
+ * [CAM(0)]\<n\>=1: Match when search key data\<n\> == 0. _
+ * [CAM(1)]\<n\>=1, [CAM(0)]\<n\>=0: Match when search key data\<n\> ==
+ * 1. _ [CAM(1)]\<n\>=1, [CAM(0)]\<n\>=1: Reserved.  The reserved
+ * combination is not allowed. Hardware suppresses any write to CAM(0) or
+ * CAM(1) that would result in the reserved combination for any CAM bit.
+ * The reset value for all non-reserved fields in
+ * NPC_AF_MCAME()_BANK()_CAM()_INTF, NPC_AF_MCAME()_BANK()_CAM()_W0 and
+ * NPC_AF_MCAME()_BANK()_CAM()_W1 is all zeros for CAM(1) and all ones
+ * for CAM(0), matching a search key of all zeros.  When an interface is
+ * configured to use the NPC_MCAM_KEY_X1_S search key format
+ * (NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X1), the four banks of
+ * every MCAM entry are used as individual entries, each of which is
+ * independently compared with the search key as follows: _
+ * NPC_AF_MCAME()_BANK()_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X1_S[INTF]. _ NPC_AF_MCAME()_BANK()_CAM()_W0[MD]
+ * corresponds to NPC_MCAM_KEY_X1_S[KW0]. _
+ * NPC_AF_MCAME()_BANK()_CAM()_W1[MD] corresponds to
+ * NPC_MCAM_KEY_X1_S[KW1].  When an interface is configured to use the
+ * NPC_MCAM_KEY_X2_S search key format (NPC_AF_INTF()_KEX_CFG[KEYW] =
+ * NPC_MCAMKEYW_E::X2), banks 0-1 of every MCAM entry are used as one
+ * double-wide entry, banks 2-3 as a second double-wide entry, and each
+ * double-wide entry is independently compared with the search key as
+ * follows: _ NPC_AF_MCAME()_BANK(0,2)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X2_S[INTF]. _ NPC_AF_MCAME()_BANK(0,2)_CAM()_W0[MD]
+ * corresponds to NPC_MCAM_KEY_X2_S[KW0]. _
+ * NPC_AF_MCAME()_BANK(0,2)_CAM()_W1[MD] corresponds to
+ * NPC_MCAM_KEY_X2_S[KW1]\<47:0\>. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X2_S[INTF]. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_W0[MD]\<15:0\> corresponds to
+ * NPC_MCAM_KEY_X2_S[KW1]\<63:48\>. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_W0[MD]\<63:16\> corresponds to
+ * NPC_MCAM_KEY_X2_S[KW2]\<47:0\>. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_W1[MD]\<15:0\> corresponds to
+ * NPC_MCAM_KEY_X2_S[KW2]\<63:48\>. _
+ * NPC_AF_MCAME()_BANK(1,3)_CAM()_W1[MD]\<47:16\> corresponds to
+ * NPC_MCAM_KEY_X2_S[KW3]\<31:0\>.  When an interface is configured to
+ * use the NPC_MCAM_KEY_X4_S search key format
+ * (NPC_AF_INTF()_KEX_CFG[KEYW] = NPC_MCAMKEYW_E::X4), the four banks of
+ * every MCAM entry are used as a single quad-wide entry that is compared
+ * with the search key as follows: _
+ * NPC_AF_MCAME()_BANK(0)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X4_S[INTF]. _ NPC_AF_MCAME()_BANK(0)_CAM()_W0[MD]
+ * corresponds to NPC_MCAM_KEY_X4_S[KW0]. _
+ * NPC_AF_MCAME()_BANK(0)_CAM()_W1[MD] corresponds to
+ * NPC_MCAM_KEY_X4_S[KW1]\<47:0\>. _
+ * NPC_AF_MCAME()_BANK(1)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X4_S[INTF]. _ NPC_AF_MCAME()_BANK(1)_CAM()_W0[MD]\<15:0\>
+ * corresponds to NPC_MCAM_KEY_X4_S[KW1]\<63:48\>. _
+ * NPC_AF_MCAME()_BANK(1)_CAM()_W0[MD]\<63:16\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW2]\<47:0\>. _
+ * NPC_AF_MCAME()_BANK(1)_CAM()_W1[MD]\<15:0\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW2]\<63:48\>. _
+ * NPC_AF_MCAME()_BANK(1)_CAM()_W1[MD]\<47:16\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW3]\<31:0\>. _
+ * NPC_AF_MCAME()_BANK(2)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X4_S[INTF]. _ NPC_AF_MCAME()_BANK(2)_CAM()_W0[MD]\<31:0\>
+ * corresponds to NPC_MCAM_KEY_X4_S[KW3]\<63:32\>. _
+ * NPC_AF_MCAME()_BANK(2)_CAM()_W0[MD]\<63:32\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW4]\<31:0\>. _
+ * NPC_AF_MCAME()_BANK(2)_CAM()_W1[MD]\<31:0\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW4]\<63:32\>. _
+ * NPC_AF_MCAME()_BANK(2)_CAM()_W1[MD]\<47:32\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW5]\<15:0\>. _
+ * NPC_AF_MCAME()_BANK(3)_CAM()_INTF[INTF] corresponds to
+ * NPC_MCAM_KEY_X4_S[INTF]. _ NPC_AF_MCAME()_BANK(3)_CAM()_W0[MD]\<47:0\>
+ * corresponds to NPC_MCAM_KEY_X4_S[KW5]\<63:16\>. _
+ * NPC_AF_MCAME()_BANK(3)_CAM()_W0[MD]\<63:48\> corresponds to
+ * NPC_MCAM_KEY_X4_S[KW6]\<15:0\>. _ NPC_AF_MCAME()_BANK(3)_CAM()_W1[MD]
+ * corresponds to NPC_MCAM_KEY_X4_S[KW6]\<63:16\>.  Note that for the X2
+ * and X4 formats, a wide entry will not match unless the INTF fields
+ * from the associated two or four banks match the INTF value from the
+ * search key.  For the X1 and X2 formats, a match in a lower-numbered
+ * bank takes priority over a match in any higher numbered banks. Within
+ * each bank, the lowest numbered matching entry takes priority over any
+ * higher numbered entry.
+ */
+union npc_af_mcamex_bankx_camx_intf {
+	u64 u;
+	struct npc_af_mcamex_bankx_camx_intf_s {
+		u64 intf                             : 2;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct npc_af_mcamex_bankx_camx_intf_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_INTF(u64 a, u64 b, u64 c)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_INTF(u64 a, u64 b, u64 c)
+{
+	return 0x1000000 + 0x400 * a + 0x40 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_cam#_w0
+ *
+ * NPC AF MCAM Entry Bank CAM Data Word 0 Registers MCAM comparison
+ * ternary data word 0. See NPC_AF_MCAME()_BANK()_CAM()_INTF.
+ */
+union npc_af_mcamex_bankx_camx_w0 {
+	u64 u;
+	struct npc_af_mcamex_bankx_camx_w0_s {
+		u64 md                               : 64;
+	} s;
+	/* struct npc_af_mcamex_bankx_camx_w0_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_W0(u64 a, u64 b, u64 c)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_W0(u64 a, u64 b, u64 c)
+{
+	return 0x1000010 + 0x400 * a + 0x40 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_cam#_w1
+ *
+ * NPC AF MCAM Entry Bank Data Word 1 Registers MCAM comparison ternary
+ * data word 1. See NPC_AF_MCAME()_BANK()_CAM()_INTF.
+ */
+union npc_af_mcamex_bankx_camx_w1 {
+	u64 u;
+	struct npc_af_mcamex_bankx_camx_w1_s {
+		u64 md                               : 48;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct npc_af_mcamex_bankx_camx_w1_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_W1(u64 a, u64 b, u64 c)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_CAMX_W1(u64 a, u64 b, u64 c)
+{
+	return 0x1000020 + 0x400 * a + 0x40 * b + 8 * c;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_cfg
+ *
+ * NPC AF MCAM Entry Bank Configuration Registers
+ */
+union npc_af_mcamex_bankx_cfg {
+	u64 u;
+	struct npc_af_mcamex_bankx_cfg_s {
+		u64 ena                              : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct npc_af_mcamex_bankx_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_CFG(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_CFG(u64 a, u64 b)
+{
+	return 0x1800000 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_stat_act
+ *
+ * NPC AF MCAM Entry Bank Statistics Action Registers Used to optionally
+ * increment a NPC_AF_MATCH_STAT() counter when a packet matches an MCAM
+ * entry. See also NPC_AF_MCAME()_BANK()_ACTION.
+ */
+union npc_af_mcamex_bankx_stat_act {
+	u64 u;
+	struct npc_af_mcamex_bankx_stat_act_s {
+		u64 stat_sel                         : 9;
+		u64 ena                              : 1;
+		u64 reserved_10_63                   : 54;
+	} s;
+	/* struct npc_af_mcamex_bankx_stat_act_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_STAT_ACT(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_STAT_ACT(u64 a, u64 b)
+{
+	return 0x1880000 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_mcame#_bank#_tag_act
+ *
+ * NPC AF MCAM Entry Bank VTag Action Data Registers Specifies a packet's
+ * match Vtag action captured in NPC_RESULT_S[VTAG_ACTION]. See also
+ * NPC_AF_MCAME()_BANK()_ACTION.
+ */
+union npc_af_mcamex_bankx_tag_act {
+	u64 u;
+	struct npc_af_mcamex_bankx_tag_act_s {
+		u64 vtag_action                      : 64;
+	} s;
+	/* struct npc_af_mcamex_bankx_tag_act_s cn; */
+};
+
+static inline u64 NPC_AF_MCAMEX_BANKX_TAG_ACT(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_MCAMEX_BANKX_TAG_ACT(u64 a, u64 b)
+{
+	return 0x1900008 + 0x100 * a + 0x10 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_cfg
+ *
+ * NPC AF Protocol Check Configuration Register
+ */
+union npc_af_pck_cfg {
+	u64 u;
+	struct npc_af_pck_cfg_s {
+		u64 reserved_0                       : 1;
+		u64 iip4_cksum                       : 1;
+		u64 oip4_cksum                       : 1;
+		u64 reserved_3                       : 1;
+		u64 l3b                              : 1;
+		u64 l3m                              : 1;
+		u64 l2b                              : 1;
+		u64 l2m                              : 1;
+		u64 reserved_8_23                    : 16;
+		u64 iip4_cksum_errcode               : 8;
+		u64 oip4_cksum_errcode               : 8;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct npc_af_pck_cfg_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_CFG(void)
+{
+	return 0x600;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_def_iip4
+ *
+ * NPC AF Protocol Check Inner IPv4 Definition Register Provides layer
+ * information used by the protocol checker to identify an inner IPv4
+ * header.
+ */
+union npc_af_pck_def_iip4 {
+	u64 u;
+	struct npc_af_pck_def_iip4_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct npc_af_pck_def_iip4_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_DEF_IIP4(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_DEF_IIP4(void)
+{
+	return 0x640;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_def_oip4
+ *
+ * NPC AF Protocol Check Outer IPv4 Definition Register Provides layer
+ * information used by the protocol checker to identify an outer IPv4
+ * header.
+ */
+union npc_af_pck_def_oip4 {
+	u64 u;
+	struct npc_af_pck_def_oip4_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct npc_af_pck_def_oip4_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_DEF_OIP4(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_DEF_OIP4(void)
+{
+	return 0x620;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_def_oip6
+ *
+ * NPC AF Protocol Check Outer IPv6 Definition Register Provides layer
+ * information used by the protocol checker to identify an outer IPv6
+ * header. [LID] must have the same value as NPC_AF_PCK_DEF_OIP4[LID].
+ */
+union npc_af_pck_def_oip6 {
+	u64 u;
+	struct npc_af_pck_def_oip6_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct npc_af_pck_def_oip6_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_DEF_OIP6(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_DEF_OIP6(void)
+{
+	return 0x630;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pck_def_ol2
+ *
+ * NPC AF Protocol Check Outer L2 Definition Register Provides layer
+ * information used by the protocol checker to identify an outer L2
+ * header.
+ */
+union npc_af_pck_def_ol2 {
+	u64 u;
+	struct npc_af_pck_def_ol2_s {
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_11_63                   : 53;
+	} s;
+	/* struct npc_af_pck_def_ol2_s cn; */
+};
+
+static inline u64 NPC_AF_PCK_DEF_OL2(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PCK_DEF_OL2(void)
+{
+	return 0x610;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pkind#_action0
+ *
+ * NPC AF Port Kind Action Data 0 Registers NPC_AF_PKIND()_ACTION0 and
+ * NPC_AF_PKIND()_ACTION1 specify the initial parse state and operations
+ * to perform before entering KPU 0.
+ */
+union npc_af_pkindx_action0 {
+	u64 u;
+	struct npc_af_pkindx_action0_s {
+		u64 var_len_shift                    : 3;
+		u64 var_len_right                    : 1;
+		u64 var_len_mask                     : 8;
+		u64 var_len_offset                   : 8;
+		u64 ptr_advance                      : 8;
+		u64 capture_flags                    : 8;
+		u64 capture_ltype                    : 4;
+		u64 capture_lid                      : 3;
+		u64 reserved_43                      : 1;
+		u64 next_state                       : 8;
+		u64 parse_done                       : 1;
+		u64 capture_ena                      : 1;
+		u64 byp_count                        : 3;
+		u64 reserved_57_63                   : 7;
+	} s;
+	/* struct npc_af_pkindx_action0_s cn; */
+};
+
+static inline u64 NPC_AF_PKINDX_ACTION0(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PKINDX_ACTION0(u64 a)
+{
+	return 0x80000 + 0x40 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pkind#_action1
+ *
+ * NPC AF Port Kind Action Data 1 Registers NPC_AF_PKIND()_ACTION0 and
+ * NPC_AF_PKIND()_ACTION1 specify the initial parse state and operations
+ * to perform before entering KPU 0.
+ */
+union npc_af_pkindx_action1 {
+	u64 u;
+	struct npc_af_pkindx_action1_s {
+		u64 dp0_offset                       : 8;
+		u64 dp1_offset                       : 8;
+		u64 dp2_offset                       : 8;
+		u64 errcode                          : 8;
+		u64 errlev                           : 4;
+		u64 reserved_36_63                   : 28;
+	} s;
+	/* struct npc_af_pkindx_action1_s cn; */
+};
+
+static inline u64 NPC_AF_PKINDX_ACTION1(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PKINDX_ACTION1(u64 a)
+{
+	return 0x80008 + 0x40 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) npc_af_pkind#_cpi_def#
+ *
+ * NPC AF Port Kind Channel Parse Index Definition Registers These
+ * registers specify the layer information and algorithm to compute a
+ * packet's channel parse index (CPI), which provides a port to channel
+ * adder for calculating NPC_RESULT_S[CHAN].  There are two CPI
+ * definitions per port kind, allowing the CPI computation to use two
+ * possible layer definitions in the parsed packet, e.g. DiffServ DSCP
+ * from either IPv4 or IPv6 header.  CPI pseudocode: \<pre\> for (i = 0;
+ * i \< 2; i++) {    cpi_def = NPC_AF_PKIND()_CPI_DEF(i);    LX = LA, LB,
+ * ..., or LH as selected by cpi_def[LID];     if (cpi_def[ENA]        &&
+ * ((cpi_def[LTYPE_MATCH] & cpi_def[LTYPE_MASK])             ==
+ * (NPC_RESULT_S[LX[LTYPE]] & cpi_def[LTYPE_MASK]))        &&
+ * ((cpi_def[FLAGS_MATCH] & cpi_def[FLAGS_MASK])             ==
+ * (NPC_RESULT_S[LX[FLAGS]] & cpi_def[FLAGS_MASK])))    {       // Found
+ * matching layer       nibble_offset = (2*NPC_RESULT_S[LX[LPTR]]) +
+ * cpi_def[ADD_OFFSET];       add_byte = byte at nibble_offset from start
+ * of packet;       cpi_add = (add_byte & cpi_def[ADD_MASK]) \>\>
+ * cpi_def[ADD_SHIFT];       cpi = cpi_def[CPI_BASE] + cpi_add;
+ * NPC_RESULT_S[CHAN] += NPC_AF_CPI(cpi)_CFG[PADD];       break;    } }
+ * \</pre\>
+ */
+union npc_af_pkindx_cpi_defx {
+	u64 u;
+	struct npc_af_pkindx_cpi_defx_s {
+		u64 cpi_base                         : 10;
+		u64 reserved_10_11                   : 2;
+		u64 add_shift                        : 3;
+		u64 reserved_15                      : 1;
+		u64 add_mask                         : 8;
+		u64 add_offset                       : 8;
+		u64 flags_mask                       : 8;
+		u64 flags_match                      : 8;
+		u64 ltype_mask                       : 4;
+		u64 ltype_match                      : 4;
+		u64 lid                              : 3;
+		u64 reserved_59_62                   : 4;
+		u64 ena                              : 1;
+	} s;
+	/* struct npc_af_pkindx_cpi_defx_s cn; */
+};
+
+static inline u64 NPC_AF_PKINDX_CPI_DEFX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 NPC_AF_PKINDX_CPI_DEFX(u64 a, u64 b)
+{
+	return 0x80020 + 0x40 * a + 8 * b;
+}
+
+#endif /* __CSRS_NPC_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-rvu.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-rvu.h
new file mode 100644
index 000000000..f4e0de602
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/csrs/csrs-rvu.h
@@ -0,0 +1,2276 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_RVU_H__
+#define __CSRS_RVU_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * RVU.
+ *
+ * This file is auto generated.  Do not edit.
+ *
+ */
+
+/**
+ * Enumeration rvu_af_int_vec_e
+ *
+ * RVU Admin Function Interrupt Vector Enumeration Enumerates the MSI-X
+ * interrupt vectors. Internal: RVU maintains the state of these vectors
+ * internally, and generates GIB messages for it without accessing the
+ * MSI-X table region in LLC/DRAM.
+ */
+#define RVU_AF_INT_VEC_E_GEN (3)
+#define RVU_AF_INT_VEC_E_MBOX (4)
+#define RVU_AF_INT_VEC_E_PFFLR (1)
+#define RVU_AF_INT_VEC_E_PFME (2)
+#define RVU_AF_INT_VEC_E_POISON (0)
+
+/**
+ * Enumeration rvu_bar_e
+ *
+ * RVU Base Address Register Enumeration Enumerates the base address
+ * registers. Internal: For documentation only.
+ */
+#define RVU_BAR_E_RVU_PFX_BAR0(a) (0x840000000000ll + 0x1000000000ll * (a))
+#define RVU_BAR_E_RVU_PFX_BAR0_SIZE 0x10000000ull
+#define RVU_BAR_E_RVU_PFX_FUNCX_BAR2(a, b)	\
+	(0x840200000000ll + 0x1000000000ll * (a) + 0x2000000ll * (b))
+#define RVU_BAR_E_RVU_PFX_FUNCX_BAR2_SIZE 0x100000ull
+#define RVU_BAR_E_RVU_PFX_FUNCX_BAR4(a, b)	\
+	(0x840400000000ll + 0x1000000000ll * (a) + 0x2000000ll * (b))
+#define RVU_BAR_E_RVU_PFX_FUNCX_BAR4_SIZE 0x10000ull
+
+/**
+ * Enumeration rvu_block_addr_e
+ *
+ * RVU Block Address Enumeration Enumerates addressing of RVU resource
+ * blocks within each RVU BAR, i.e. values of RVU_FUNC_ADDR_S[BLOCK] and
+ * RVU_AF_ADDR_S[BLOCK].  CNXXXX may not implement all enumerated blocks.
+ * Software can read RVU_PF/RVU_VF_BLOCK_ADDR()_DISC[IMP] to discover
+ * which blocks are implemented and enabled.
+ */
+#define RVU_BLOCK_ADDR_E_CPTX(a) (0xa + (a))
+#define RVU_BLOCK_ADDR_E_LMT (1)
+#define RVU_BLOCK_ADDR_E_NDCX(a) (0xc + (a))
+#define RVU_BLOCK_ADDR_E_NIXX(a) (4 + (a))
+#define RVU_BLOCK_ADDR_E_NPA (3)
+#define RVU_BLOCK_ADDR_E_NPC (6)
+#define RVU_BLOCK_ADDR_E_RX(a) (0 + (a))
+#define RVU_BLOCK_ADDR_E_REEX(a) (0x14 + (a))
+#define RVU_BLOCK_ADDR_E_RVUM (0)
+#define RVU_BLOCK_ADDR_E_SSO (7)
+#define RVU_BLOCK_ADDR_E_SSOW (8)
+#define RVU_BLOCK_ADDR_E_TIM (9)
+
+/**
+ * Enumeration rvu_block_type_e
+ *
+ * RVU Block Type Enumeration Enumerates values of
+ * RVU_PF/RVU_VF_BLOCK_ADDR()_DISC[BTYPE].
+ */
+#define RVU_BLOCK_TYPE_E_CPT (9)
+#define RVU_BLOCK_TYPE_E_DDF (0xb)
+#define RVU_BLOCK_TYPE_E_LMT (2)
+#define RVU_BLOCK_TYPE_E_NDC (0xa)
+#define RVU_BLOCK_TYPE_E_NIX (3)
+#define RVU_BLOCK_TYPE_E_NPA (4)
+#define RVU_BLOCK_TYPE_E_NPC (5)
+#define RVU_BLOCK_TYPE_E_RAD (0xd)
+#define RVU_BLOCK_TYPE_E_REE (0xe)
+#define RVU_BLOCK_TYPE_E_RVUM (0)
+#define RVU_BLOCK_TYPE_E_SSO (6)
+#define RVU_BLOCK_TYPE_E_SSOW (7)
+#define RVU_BLOCK_TYPE_E_TIM (8)
+#define RVU_BLOCK_TYPE_E_ZIP (0xc)
+
+/**
+ * Enumeration rvu_bus_lf_e
+ *
+ * INTERNAL: RVU Bus LF Range Enumeration  Enumerates the LF range for
+ * the RVU bus. Internal: This is an enum used in csr3 virtual equations.
+ */
+#define RVU_BUS_LF_E_RVU_BUS_LFX(a) (0 + 0x2000000 * (a))
+
+/**
+ * Enumeration rvu_bus_lf_slot_e
+ *
+ * INTERNAL: RVU Bus LF Slot Range Enumeration  Enumerates the LF and
+ * Slot range for the RVU bus. Internal: This is an enum used in csr3
+ * virtual equations.
+ */
+#define RVU_BUS_LF_SLOT_E_RVU_BUS_LFX_SLOTX(a, b)	\
+	(0 + 0x2000000 * (a) + 0x1000 * (b))
+
+/**
+ * Enumeration rvu_bus_pf_e
+ *
+ * INTERNAL: RVU Bus PF Range Enumeration  Enumerates the PF range for
+ * the RVU bus. Internal: This is an enum used in csr3 virtual equations.
+ */
+#define RVU_BUS_PF_E_RVU_BUS_PFX(a) (0ll + 0x1000000000ll * (a))
+
+/**
+ * Enumeration rvu_bus_pfvf_e
+ *
+ * INTERNAL: RVU Bus PFVF Range Enumeration  Enumerates the PF and VF
+ * ranges for the RVU bus. Internal: This is an enum used in csr3 virtual
+ * equations.
+ */
+#define RVU_BUS_PFVF_E_RVU_BUS_PFX(a) (0 + 0x2000000 * (a))
+#define RVU_BUS_PFVF_E_RVU_BUS_VFX(a) (0 + 0x2000000 * (a))
+
+/**
+ * Enumeration rvu_busbar_e
+ *
+ * INTERNAL: RVU Bus Base Address Region Enumeration  Enumerates the base
+ * address region for the RVU bus. Internal: This is an enum used in csr3
+ * virtual equations.
+ */
+#define RVU_BUSBAR_E_RVU_BUSBAR0 (0)
+#define RVU_BUSBAR_E_RVU_BUSBAR2 (0x200000000ll)
+
+/**
+ * Enumeration rvu_busdid_e
+ *
+ * INTERNAL: RVU Bus DID Enumeration  Enumerates the DID offset for the
+ * RVU bus. Internal: This is an enum used in csr3 virtual equations.
+ */
+#define RVU_BUSDID_E_RVU_BUSDID (0x840000000000ll)
+
+/**
+ * Enumeration rvu_pf_int_vec_e
+ *
+ * RVU PF Interrupt Vector Enumeration Enumerates the MSI-X interrupt
+ * vectors.
+ */
+#define RVU_PF_INT_VEC_E_AFPF_MBOX (6)
+#define RVU_PF_INT_VEC_E_VFFLRX(a) (0 + (a))
+#define RVU_PF_INT_VEC_E_VFMEX(a) (2 + (a))
+#define RVU_PF_INT_VEC_E_VFPF_MBOXX(a) (4 + (a))
+
+/**
+ * Enumeration rvu_vf_int_vec_e
+ *
+ * RVU VF Interrupt Vector Enumeration Enumerates the MSI-X interrupt
+ * vectors.
+ */
+#define RVU_VF_INT_VEC_E_MBOX (0)
+
+/**
+ * Structure rvu_af_addr_s
+ *
+ * RVU Admin Function Register Address Structure Address format for
+ * accessing shared Admin Function (AF) registers in RVU PF BAR0. These
+ * registers may be accessed by all RVU PFs whose
+ * RVU_PRIV_PF()_CFG[AF_ENA] bit is set.
+ */
+union rvu_af_addr_s {
+	u64 u;
+	struct rvu_af_addr_s_s {
+		u64 addr                             : 28;
+		u64 block                            : 5;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct rvu_af_addr_s_s cn; */
+};
+
+/**
+ * Structure rvu_func_addr_s
+ *
+ * RVU Function-unique Address Structure Address format for accessing
+ * function-unique registers in RVU PF/FUNC BAR2.
+ */
+union rvu_func_addr_s {
+	u32 u;
+	struct rvu_func_addr_s_s {
+		u32 addr                             : 12;
+		u32 lf_slot                          : 8;
+		u32 block                            : 5;
+		u32 reserved_25_31                   : 7;
+	} s;
+	/* struct rvu_func_addr_s_s cn; */
+};
+
+/**
+ * Structure rvu_msix_vec_s
+ *
+ * RVU MSI-X Vector Structure Format of entries in the RVU MSI-X table
+ * region in LLC/DRAM. See RVU_PRIV_PF()_MSIX_CFG.
+ */
+union rvu_msix_vec_s {
+	u64 u[2];
+	struct rvu_msix_vec_s_s {
+		u64 addr                             : 64;
+		u64 data                             : 32;
+		u64 mask                             : 1;
+		u64 pend                             : 1;
+		u64 reserved_98_127                  : 30;
+	} s;
+	/* struct rvu_msix_vec_s_s cn; */
+};
+
+/**
+ * Structure rvu_pf_func_s
+ *
+ * RVU PF Function Identification Structure Identifies an RVU PF/VF, and
+ * format of *_PRIV_LF()_CFG[PF_FUNC] in RVU resource blocks, e.g.
+ * NPA_PRIV_LF()_CFG[PF_FUNC].  Internal: Also used for PF/VF
+ * identification on inter-coprocessor hardware interfaces (NPA, SSO,
+ * CPT, ...).
+ */
+union rvu_pf_func_s {
+	u32 u;
+	struct rvu_pf_func_s_s {
+		u32 func                             : 10;
+		u32 pf                               : 6;
+		u32 reserved_16_31                   : 16;
+	} s;
+	/* struct rvu_pf_func_s_s cn; */
+};
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_afpf#_mbox#
+ *
+ * RVU Admin Function AF/PF Mailbox Registers
+ */
+union rvu_af_afpfx_mboxx {
+	u64 u;
+	struct rvu_af_afpfx_mboxx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct rvu_af_afpfx_mboxx_s cn; */
+};
+
+static inline u64 RVU_AF_AFPFX_MBOXX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_AFPFX_MBOXX(u64 a, u64 b)
+{
+	return 0x2000 + 0x10 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_bar2_alias#
+ *
+ * INTERNAL: RVU Admin Function  BAR2 Alias Registers  These registers
+ * alias to the RVU BAR2 registers for the PF and function selected by
+ * RVU_AF_BAR2_SEL[PF_FUNC].  Internal: Not implemented. Placeholder for
+ * bug33464.
+ */
+union rvu_af_bar2_aliasx {
+	u64 u;
+	struct rvu_af_bar2_aliasx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct rvu_af_bar2_aliasx_s cn; */
+};
+
+static inline u64 RVU_AF_BAR2_ALIASX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_BAR2_ALIASX(u64 a)
+{
+	return 0x9100000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_bar2_sel
+ *
+ * INTERNAL: RVU Admin Function BAR2 Select Register  This register
+ * configures BAR2 accesses from the RVU_AF_BAR2_ALIAS() registers in
+ * BAR0. Internal: Not implemented. Placeholder for bug33464.
+ */
+union rvu_af_bar2_sel {
+	u64 u;
+	struct rvu_af_bar2_sel_s {
+		u64 alias_pf_func                    : 16;
+		u64 alias_ena                        : 1;
+		u64 reserved_17_63                   : 47;
+	} s;
+	/* struct rvu_af_bar2_sel_s cn; */
+};
+
+static inline u64 RVU_AF_BAR2_SEL(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_BAR2_SEL(void)
+{
+	return 0x9000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_blk_rst
+ *
+ * RVU Master Admin Function Block Reset Register
+ */
+union rvu_af_blk_rst {
+	u64 u;
+	struct rvu_af_blk_rst_s {
+		u64 rst                              : 1;
+		u64 reserved_1_62                    : 62;
+		u64 busy                             : 1;
+	} s;
+	/* struct rvu_af_blk_rst_s cn; */
+};
+
+static inline u64 RVU_AF_BLK_RST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_BLK_RST(void)
+{
+	return 0x30;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_bp_test
+ *
+ * INTERNAL: RVUM Backpressure Test Registers
+ */
+union rvu_af_bp_test {
+	u64 u;
+	struct rvu_af_bp_test_s {
+		u64 lfsr_freq                        : 12;
+		u64 reserved_12_15                   : 4;
+		u64 bp_cfg                           : 16;
+		u64 enable                           : 8;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct rvu_af_bp_test_s cn; */
+};
+
+static inline u64 RVU_AF_BP_TEST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_BP_TEST(void)
+{
+	return 0x4000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_eco
+ *
+ * INTERNAL: RVU Admin Function ECO Register
+ */
+union rvu_af_eco {
+	u64 u;
+	struct rvu_af_eco_s {
+		u64 eco_rw                           : 32;
+		u64 reserved_32_63                   : 32;
+	} s;
+	/* struct rvu_af_eco_s cn; */
+};
+
+static inline u64 RVU_AF_ECO(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_ECO(void)
+{
+	return 0x20;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_gen_int
+ *
+ * RVU Admin Function General Interrupt Register This register contains
+ * General interrupt summary bits.
+ */
+union rvu_af_gen_int {
+	u64 u;
+	struct rvu_af_gen_int_s {
+		u64 unmapped                         : 1;
+		u64 msix_fault                       : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct rvu_af_gen_int_s cn; */
+};
+
+static inline u64 RVU_AF_GEN_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_GEN_INT(void)
+{
+	return 0x120;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_gen_int_ena_w1c
+ *
+ * RVU Admin Function General Interrupt Enable Clear Register This
+ * register clears interrupt enable bits.
+ */
+union rvu_af_gen_int_ena_w1c {
+	u64 u;
+	struct rvu_af_gen_int_ena_w1c_s {
+		u64 unmapped                         : 1;
+		u64 msix_fault                       : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct rvu_af_gen_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_GEN_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_GEN_INT_ENA_W1C(void)
+{
+	return 0x138;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_gen_int_ena_w1s
+ *
+ * RVU Admin Function General Interrupt Enable Set Register This register
+ * sets interrupt enable bits.
+ */
+union rvu_af_gen_int_ena_w1s {
+	u64 u;
+	struct rvu_af_gen_int_ena_w1s_s {
+		u64 unmapped                         : 1;
+		u64 msix_fault                       : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct rvu_af_gen_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_GEN_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_GEN_INT_ENA_W1S(void)
+{
+	return 0x130;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_gen_int_w1s
+ *
+ * RVU Admin Function General Interrupt Set Register This register sets
+ * interrupt bits.
+ */
+union rvu_af_gen_int_w1s {
+	u64 u;
+	struct rvu_af_gen_int_w1s_s {
+		u64 unmapped                         : 1;
+		u64 msix_fault                       : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct rvu_af_gen_int_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_GEN_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_GEN_INT_W1S(void)
+{
+	return 0x128;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_hwvf_rst
+ *
+ * RVU Admin Function Hardware VF Reset Register
+ */
+union rvu_af_hwvf_rst {
+	u64 u;
+	struct rvu_af_hwvf_rst_s {
+		u64 hwvf                             : 8;
+		u64 reserved_8_11                    : 4;
+		u64 exec                             : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct rvu_af_hwvf_rst_s cn; */
+};
+
+static inline u64 RVU_AF_HWVF_RST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_HWVF_RST(void)
+{
+	return 0x2850;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_msixtr_base
+ *
+ * RVU Admin Function MSI-X Table Region Base-Address Register
+ */
+union rvu_af_msixtr_base {
+	u64 u;
+	struct rvu_af_msixtr_base_s {
+		u64 reserved_0_6                     : 7;
+		u64 addr                             : 46;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct rvu_af_msixtr_base_s cn; */
+};
+
+static inline u64 RVU_AF_MSIXTR_BASE(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_MSIXTR_BASE(void)
+{
+	return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pf#_vf_bar4_addr
+ *
+ * RVU Admin Function PF/VF BAR4 Address Registers
+ */
+union rvu_af_pfx_vf_bar4_addr {
+	u64 u;
+	struct rvu_af_pfx_vf_bar4_addr_s {
+		u64 reserved_0_15                    : 16;
+		u64 addr                             : 48;
+	} s;
+	/* struct rvu_af_pfx_vf_bar4_addr_s cn; */
+};
+
+static inline u64 RVU_AF_PFX_VF_BAR4_ADDR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFX_VF_BAR4_ADDR(u64 a)
+{
+	return 0x1000 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pf_bar4_addr
+ *
+ * RVU Admin Function PF BAR4 Address Registers
+ */
+union rvu_af_pf_bar4_addr {
+	u64 u;
+	struct rvu_af_pf_bar4_addr_s {
+		u64 reserved_0_15                    : 16;
+		u64 addr                             : 48;
+	} s;
+	/* struct rvu_af_pf_bar4_addr_s cn; */
+};
+
+static inline u64 RVU_AF_PF_BAR4_ADDR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PF_BAR4_ADDR(void)
+{
+	return 0x40;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pf_rst
+ *
+ * RVU Admin Function PF Reset Register
+ */
+union rvu_af_pf_rst {
+	u64 u;
+	struct rvu_af_pf_rst_s {
+		u64 pf                               : 4;
+		u64 reserved_4_11                    : 8;
+		u64 exec                             : 1;
+		u64 reserved_13_63                   : 51;
+	} s;
+	/* struct rvu_af_pf_rst_s cn; */
+};
+
+static inline u64 RVU_AF_PF_RST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PF_RST(void)
+{
+	return 0x2840;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfaf_mbox_int
+ *
+ * RVU Admin Function PF to AF Mailbox Interrupt Registers
+ */
+union rvu_af_pfaf_mbox_int {
+	u64 u;
+	struct rvu_af_pfaf_mbox_int_s {
+		u64 mbox                             : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfaf_mbox_int_s cn; */
+};
+
+static inline u64 RVU_AF_PFAF_MBOX_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFAF_MBOX_INT(void)
+{
+	return 0x2880;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfaf_mbox_int_ena_w1c
+ *
+ * RVU Admin Function PF to AF Mailbox Interrupt Enable Clear Registers
+ * This register clears interrupt enable bits.
+ */
+union rvu_af_pfaf_mbox_int_ena_w1c {
+	u64 u;
+	struct rvu_af_pfaf_mbox_int_ena_w1c_s {
+		u64 mbox                             : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfaf_mbox_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_PFAF_MBOX_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFAF_MBOX_INT_ENA_W1C(void)
+{
+	return 0x2898;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfaf_mbox_int_ena_w1s
+ *
+ * RVU Admin Function PF to AF Mailbox Interrupt Enable Set Registers
+ * This register sets interrupt enable bits.
+ */
+union rvu_af_pfaf_mbox_int_ena_w1s {
+	u64 u;
+	struct rvu_af_pfaf_mbox_int_ena_w1s_s {
+		u64 mbox                             : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfaf_mbox_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFAF_MBOX_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFAF_MBOX_INT_ENA_W1S(void)
+{
+	return 0x2890;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfaf_mbox_int_w1s
+ *
+ * RVU Admin Function PF to AF Mailbox Interrupt Set Registers This
+ * register sets interrupt bits.
+ */
+union rvu_af_pfaf_mbox_int_w1s {
+	u64 u;
+	struct rvu_af_pfaf_mbox_int_w1s_s {
+		u64 mbox                             : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfaf_mbox_int_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFAF_MBOX_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFAF_MBOX_INT_W1S(void)
+{
+	return 0x2888;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfflr_int
+ *
+ * RVU Admin Function PF Function Level Reset Interrupt Registers
+ */
+union rvu_af_pfflr_int {
+	u64 u;
+	struct rvu_af_pfflr_int_s {
+		u64 flr                              : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfflr_int_s cn; */
+};
+
+static inline u64 RVU_AF_PFFLR_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFFLR_INT(void)
+{
+	return 0x28a0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfflr_int_ena_w1c
+ *
+ * RVU Admin Function PF Function Level Reset Interrupt Enable Clear
+ * Registers This register clears interrupt enable bits.
+ */
+union rvu_af_pfflr_int_ena_w1c {
+	u64 u;
+	struct rvu_af_pfflr_int_ena_w1c_s {
+		u64 flr                              : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfflr_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_PFFLR_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFFLR_INT_ENA_W1C(void)
+{
+	return 0x28b8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfflr_int_ena_w1s
+ *
+ * RVU Admin Function PF Function Level Reset Interrupt Enable Set
+ * Registers This register sets interrupt enable bits.
+ */
+union rvu_af_pfflr_int_ena_w1s {
+	u64 u;
+	struct rvu_af_pfflr_int_ena_w1s_s {
+		u64 flr                              : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfflr_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFFLR_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFFLR_INT_ENA_W1S(void)
+{
+	return 0x28b0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfflr_int_w1s
+ *
+ * RVU Admin Function PF Function Level Reset Interrupt Set Registers
+ * This register sets interrupt bits.
+ */
+union rvu_af_pfflr_int_w1s {
+	u64 u;
+	struct rvu_af_pfflr_int_w1s_s {
+		u64 flr                              : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfflr_int_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFFLR_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFFLR_INT_W1S(void)
+{
+	return 0x28a8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_int
+ *
+ * RVU Admin Function PF Bus Master Enable Interrupt Registers
+ */
+union rvu_af_pfme_int {
+	u64 u;
+	struct rvu_af_pfme_int_s {
+		u64 me                               : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfme_int_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_INT(void)
+{
+	return 0x28c0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_int_ena_w1c
+ *
+ * RVU Admin Function PF Bus Master Enable Interrupt Enable Clear
+ * Registers This register clears interrupt enable bits.
+ */
+union rvu_af_pfme_int_ena_w1c {
+	u64 u;
+	struct rvu_af_pfme_int_ena_w1c_s {
+		u64 me                               : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfme_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_INT_ENA_W1C(void)
+{
+	return 0x28d8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_int_ena_w1s
+ *
+ * RVU Admin Function PF Bus Master Enable Interrupt Enable Set Registers
+ * This register sets interrupt enable bits.
+ */
+union rvu_af_pfme_int_ena_w1s {
+	u64 u;
+	struct rvu_af_pfme_int_ena_w1s_s {
+		u64 me                               : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfme_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_INT_ENA_W1S(void)
+{
+	return 0x28d0;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_int_w1s
+ *
+ * RVU Admin Function PF Bus Master Enable Interrupt Set Registers This
+ * register sets interrupt bits.
+ */
+union rvu_af_pfme_int_w1s {
+	u64 u;
+	struct rvu_af_pfme_int_w1s_s {
+		u64 me                               : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfme_int_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_INT_W1S(void)
+{
+	return 0x28c8;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pfme_status
+ *
+ * RVU Admin Function PF Bus Master Enable Status Registers
+ */
+union rvu_af_pfme_status {
+	u64 u;
+	struct rvu_af_pfme_status_s {
+		u64 me                               : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pfme_status_s cn; */
+};
+
+static inline u64 RVU_AF_PFME_STATUS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFME_STATUS(void)
+{
+	return 0x2800;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pftrpend
+ *
+ * RVU Admin Function PF Transaction Pending Registers
+ */
+union rvu_af_pftrpend {
+	u64 u;
+	struct rvu_af_pftrpend_s {
+		u64 trpend                           : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pftrpend_s cn; */
+};
+
+static inline u64 RVU_AF_PFTRPEND(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFTRPEND(void)
+{
+	return 0x2810;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_pftrpend_w1s
+ *
+ * RVU Admin Function PF Transaction Pending Set Registers This register
+ * reads or sets bits.
+ */
+union rvu_af_pftrpend_w1s {
+	u64 u;
+	struct rvu_af_pftrpend_w1s_s {
+		u64 trpend                           : 16;
+		u64 reserved_16_63                   : 48;
+	} s;
+	/* struct rvu_af_pftrpend_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_PFTRPEND_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_PFTRPEND_W1S(void)
+{
+	return 0x2820;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_ras
+ *
+ * RVU Admin Function RAS Interrupt Register This register is intended
+ * for delivery of RAS events to the SCP, so should be ignored by OS
+ * drivers.
+ */
+union rvu_af_ras {
+	u64 u;
+	struct rvu_af_ras_s {
+		u64 msix_poison                      : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_af_ras_s cn; */
+};
+
+static inline u64 RVU_AF_RAS(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_RAS(void)
+{
+	return 0x100;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_ras_ena_w1c
+ *
+ * RVU Admin Function RAS Interrupt Enable Clear Register This register
+ * clears interrupt enable bits.
+ */
+union rvu_af_ras_ena_w1c {
+	u64 u;
+	struct rvu_af_ras_ena_w1c_s {
+		u64 msix_poison                      : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_af_ras_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_AF_RAS_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_RAS_ENA_W1C(void)
+{
+	return 0x118;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_ras_ena_w1s
+ *
+ * RVU Admin Function RAS Interrupt Enable Set Register This register
+ * sets interrupt enable bits.
+ */
+union rvu_af_ras_ena_w1s {
+	u64 u;
+	struct rvu_af_ras_ena_w1s_s {
+		u64 msix_poison                      : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_af_ras_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_RAS_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_RAS_ENA_W1S(void)
+{
+	return 0x110;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_af_ras_w1s
+ *
+ * RVU Admin Function RAS Interrupt Set Register This register sets
+ * interrupt bits.
+ */
+union rvu_af_ras_w1s {
+	u64 u;
+	struct rvu_af_ras_w1s_s {
+		u64 msix_poison                      : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_af_ras_w1s_s cn; */
+};
+
+static inline u64 RVU_AF_RAS_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_AF_RAS_W1S(void)
+{
+	return 0x108;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_block_addr#_disc
+ *
+ * RVU PF Block Address Discovery Registers These registers allow each PF
+ * driver to discover block resources that are provisioned to its PF. The
+ * register's BLOCK_ADDR index is enumerated by RVU_BLOCK_ADDR_E.
+ */
+union rvu_pf_block_addrx_disc {
+	u64 u;
+	struct rvu_pf_block_addrx_disc_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_10                    : 2;
+		u64 imp                              : 1;
+		u64 rid                              : 8;
+		u64 btype                            : 8;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct rvu_pf_block_addrx_disc_s cn; */
+};
+
+static inline u64 RVU_PF_BLOCK_ADDRX_DISC(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_BLOCK_ADDRX_DISC(u64 a)
+{
+	return 0x200 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_int
+ *
+ * RVU PF Interrupt Registers
+ */
+union rvu_pf_int {
+	u64 u;
+	struct rvu_pf_int_s {
+		u64 mbox                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_pf_int_s cn; */
+};
+
+static inline u64 RVU_PF_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_INT(void)
+{
+	return 0xc20;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_int_ena_w1c
+ *
+ * RVU PF Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union rvu_pf_int_ena_w1c {
+	u64 u;
+	struct rvu_pf_int_ena_w1c_s {
+		u64 mbox                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_pf_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_PF_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_INT_ENA_W1C(void)
+{
+	return 0xc38;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_int_ena_w1s
+ *
+ * RVU PF Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union rvu_pf_int_ena_w1s {
+	u64 u;
+	struct rvu_pf_int_ena_w1s_s {
+		u64 mbox                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_pf_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_PF_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_INT_ENA_W1S(void)
+{
+	return 0xc30;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_int_w1s
+ *
+ * RVU PF Interrupt Set Register This register sets interrupt bits.
+ */
+union rvu_pf_int_w1s {
+	u64 u;
+	struct rvu_pf_int_w1s_s {
+		u64 mbox                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_pf_int_w1s_s cn; */
+};
+
+static inline u64 RVU_PF_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_INT_W1S(void)
+{
+	return 0xc28;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_msix_pba#
+ *
+ * RVU PF MSI-X Pending-Bit-Array Registers This register is the MSI-X PF
+ * PBA table.
+ */
+union rvu_pf_msix_pbax {
+	u64 u;
+	struct rvu_pf_msix_pbax_s {
+		u64 pend                             : 64;
+	} s;
+	/* struct rvu_pf_msix_pbax_s cn; */
+};
+
+static inline u64 RVU_PF_MSIX_PBAX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_MSIX_PBAX(u64 a)
+{
+	return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_msix_vec#_addr
+ *
+ * RVU PF MSI-X Vector-Table Address Registers These registers and
+ * RVU_PF_MSIX_VEC()_CTL form the PF MSI-X vector table. The number of
+ * MSI-X vectors for a given PF is specified by
+ * RVU_PRIV_PF()_MSIX_CFG[PF_MSIXT_SIZEM1] (plus 1).  Software must do a
+ * read after any writes to the MSI-X vector table to ensure that the
+ * writes have completed before interrupts are generated to the modified
+ * vectors.
+ */
+union rvu_pf_msix_vecx_addr {
+	u64 u;
+	struct rvu_pf_msix_vecx_addr_s {
+		u64 secvec                           : 1;
+		u64 reserved_1                       : 1;
+		u64 addr                             : 51;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct rvu_pf_msix_vecx_addr_s cn; */
+};
+
+static inline u64 RVU_PF_MSIX_VECX_ADDR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_MSIX_VECX_ADDR(u64 a)
+{
+	return 0x80000 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_msix_vec#_ctl
+ *
+ * RVU PF MSI-X Vector-Table Control and Data Registers These registers
+ * and RVU_PF_MSIX_VEC()_ADDR form the PF MSI-X vector table.
+ */
+union rvu_pf_msix_vecx_ctl {
+	u64 u;
+	struct rvu_pf_msix_vecx_ctl_s {
+		u64 data                             : 32;
+		u64 mask                             : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct rvu_pf_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 RVU_PF_MSIX_VECX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_MSIX_VECX_CTL(u64 a)
+{
+	return 0x80008 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_pfaf_mbox#
+ *
+ * RVU PF/AF Mailbox Registers
+ */
+union rvu_pf_pfaf_mboxx {
+	u64 u;
+	struct rvu_pf_pfaf_mboxx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct rvu_pf_pfaf_mboxx_s cn; */
+};
+
+static inline u64 RVU_PF_PFAF_MBOXX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_PFAF_MBOXX(u64 a)
+{
+	return 0xc00 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vf#_pfvf_mbox#
+ *
+ * RVU PF/VF Mailbox Registers
+ */
+union rvu_pf_vfx_pfvf_mboxx {
+	u64 u;
+	struct rvu_pf_vfx_pfvf_mboxx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct rvu_pf_vfx_pfvf_mboxx_s cn; */
+};
+
+static inline u64 RVU_PF_VFX_PFVF_MBOXX(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFX_PFVF_MBOXX(u64 a, u64 b)
+{
+	return 0 + 0x1000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vf_bar4_addr
+ *
+ * RVU PF VF BAR4 Address Registers
+ */
+union rvu_pf_vf_bar4_addr {
+	u64 u;
+	struct rvu_pf_vf_bar4_addr_s {
+		u64 reserved_0_15                    : 16;
+		u64 addr                             : 48;
+	} s;
+	/* struct rvu_pf_vf_bar4_addr_s cn; */
+};
+
+static inline u64 RVU_PF_VF_BAR4_ADDR(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VF_BAR4_ADDR(void)
+{
+	return 0x10;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfflr_int#
+ *
+ * RVU PF VF Function Level Reset Interrupt Registers
+ */
+union rvu_pf_vfflr_intx {
+	u64 u;
+	struct rvu_pf_vfflr_intx_s {
+		u64 flr                              : 64;
+	} s;
+	/* struct rvu_pf_vfflr_intx_s cn; */
+};
+
+static inline u64 RVU_PF_VFFLR_INTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFFLR_INTX(u64 a)
+{
+	return 0x900 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfflr_int_ena_w1c#
+ *
+ * RVU PF VF Function Level Reset Interrupt Enable Clear Registers This
+ * register clears interrupt enable bits.
+ */
+union rvu_pf_vfflr_int_ena_w1cx {
+	u64 u;
+	struct rvu_pf_vfflr_int_ena_w1cx_s {
+		u64 flr                              : 64;
+	} s;
+	/* struct rvu_pf_vfflr_int_ena_w1cx_s cn; */
+};
+
+static inline u64 RVU_PF_VFFLR_INT_ENA_W1CX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFFLR_INT_ENA_W1CX(u64 a)
+{
+	return 0x960 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfflr_int_ena_w1s#
+ *
+ * RVU PF VF Function Level Reset Interrupt Enable Set Registers This
+ * register sets interrupt enable bits.
+ */
+union rvu_pf_vfflr_int_ena_w1sx {
+	u64 u;
+	struct rvu_pf_vfflr_int_ena_w1sx_s {
+		u64 flr                              : 64;
+	} s;
+	/* struct rvu_pf_vfflr_int_ena_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFFLR_INT_ENA_W1SX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFFLR_INT_ENA_W1SX(u64 a)
+{
+	return 0x940 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfflr_int_w1s#
+ *
+ * RVU PF VF Function Level Reset Interrupt Set Registers This register
+ * sets interrupt bits.
+ */
+union rvu_pf_vfflr_int_w1sx {
+	u64 u;
+	struct rvu_pf_vfflr_int_w1sx_s {
+		u64 flr                              : 64;
+	} s;
+	/* struct rvu_pf_vfflr_int_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFFLR_INT_W1SX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFFLR_INT_W1SX(u64 a)
+{
+	return 0x920 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_int#
+ *
+ * RVU PF VF Bus Master Enable Interrupt Registers
+ */
+union rvu_pf_vfme_intx {
+	u64 u;
+	struct rvu_pf_vfme_intx_s {
+		u64 me                               : 64;
+	} s;
+	/* struct rvu_pf_vfme_intx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_INTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_INTX(u64 a)
+{
+	return 0x980 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_int_ena_w1c#
+ *
+ * RVU PF VF Bus Master Enable Interrupt Enable Clear Registers This
+ * register clears interrupt enable bits.
+ */
+union rvu_pf_vfme_int_ena_w1cx {
+	u64 u;
+	struct rvu_pf_vfme_int_ena_w1cx_s {
+		u64 me                               : 64;
+	} s;
+	/* struct rvu_pf_vfme_int_ena_w1cx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_INT_ENA_W1CX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_INT_ENA_W1CX(u64 a)
+{
+	return 0x9e0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_int_ena_w1s#
+ *
+ * RVU PF VF Bus Master Enable Interrupt Enable Set Registers This
+ * register sets interrupt enable bits.
+ */
+union rvu_pf_vfme_int_ena_w1sx {
+	u64 u;
+	struct rvu_pf_vfme_int_ena_w1sx_s {
+		u64 me                               : 64;
+	} s;
+	/* struct rvu_pf_vfme_int_ena_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_INT_ENA_W1SX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_INT_ENA_W1SX(u64 a)
+{
+	return 0x9c0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_int_w1s#
+ *
+ * RVU PF VF Bus Master Enable Interrupt Set Registers This register sets
+ * interrupt bits.
+ */
+union rvu_pf_vfme_int_w1sx {
+	u64 u;
+	struct rvu_pf_vfme_int_w1sx_s {
+		u64 me                               : 64;
+	} s;
+	/* struct rvu_pf_vfme_int_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_INT_W1SX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_INT_W1SX(u64 a)
+{
+	return 0x9a0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfme_status#
+ *
+ * RVU PF VF Bus Master Enable Status Registers
+ */
+union rvu_pf_vfme_statusx {
+	u64 u;
+	struct rvu_pf_vfme_statusx_s {
+		u64 me                               : 64;
+	} s;
+	/* struct rvu_pf_vfme_statusx_s cn; */
+};
+
+static inline u64 RVU_PF_VFME_STATUSX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFME_STATUSX(u64 a)
+{
+	return 0x800 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfpf_mbox_int#
+ *
+ * RVU VF to PF Mailbox Interrupt Registers
+ */
+union rvu_pf_vfpf_mbox_intx {
+	u64 u;
+	struct rvu_pf_vfpf_mbox_intx_s {
+		u64 mbox                             : 64;
+	} s;
+	/* struct rvu_pf_vfpf_mbox_intx_s cn; */
+};
+
+static inline u64 RVU_PF_VFPF_MBOX_INTX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFPF_MBOX_INTX(u64 a)
+{
+	return 0x880 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfpf_mbox_int_ena_w1c#
+ *
+ * RVU VF to PF Mailbox Interrupt Enable Clear Registers This register
+ * clears interrupt enable bits.
+ */
+union rvu_pf_vfpf_mbox_int_ena_w1cx {
+	u64 u;
+	struct rvu_pf_vfpf_mbox_int_ena_w1cx_s {
+		u64 mbox                             : 64;
+	} s;
+	/* struct rvu_pf_vfpf_mbox_int_ena_w1cx_s cn; */
+};
+
+static inline u64 RVU_PF_VFPF_MBOX_INT_ENA_W1CX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFPF_MBOX_INT_ENA_W1CX(u64 a)
+{
+	return 0x8e0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfpf_mbox_int_ena_w1s#
+ *
+ * RVU VF to PF Mailbox Interrupt Enable Set Registers This register sets
+ * interrupt enable bits.
+ */
+union rvu_pf_vfpf_mbox_int_ena_w1sx {
+	u64 u;
+	struct rvu_pf_vfpf_mbox_int_ena_w1sx_s {
+		u64 mbox                             : 64;
+	} s;
+	/* struct rvu_pf_vfpf_mbox_int_ena_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFPF_MBOX_INT_ENA_W1SX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFPF_MBOX_INT_ENA_W1SX(u64 a)
+{
+	return 0x8c0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vfpf_mbox_int_w1s#
+ *
+ * RVU VF to PF Mailbox Interrupt Set Registers This register sets
+ * interrupt bits.
+ */
+union rvu_pf_vfpf_mbox_int_w1sx {
+	u64 u;
+	struct rvu_pf_vfpf_mbox_int_w1sx_s {
+		u64 mbox                             : 64;
+	} s;
+	/* struct rvu_pf_vfpf_mbox_int_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFPF_MBOX_INT_W1SX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFPF_MBOX_INT_W1SX(u64 a)
+{
+	return 0x8a0 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vftrpend#
+ *
+ * RVU PF VF Transaction Pending Registers
+ */
+union rvu_pf_vftrpendx {
+	u64 u;
+	struct rvu_pf_vftrpendx_s {
+		u64 trpend                           : 64;
+	} s;
+	/* struct rvu_pf_vftrpendx_s cn; */
+};
+
+static inline u64 RVU_PF_VFTRPENDX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFTRPENDX(u64 a)
+{
+	return 0x820 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR2) rvu_pf_vftrpend_w1s#
+ *
+ * RVU PF VF Transaction Pending Set Registers This register reads or
+ * sets bits.
+ */
+union rvu_pf_vftrpend_w1sx {
+	u64 u;
+	struct rvu_pf_vftrpend_w1sx_s {
+		u64 trpend                           : 64;
+	} s;
+	/* struct rvu_pf_vftrpend_w1sx_s cn; */
+};
+
+static inline u64 RVU_PF_VFTRPEND_W1SX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PF_VFTRPEND_W1SX(u64 a)
+{
+	return 0x840 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_active_pc
+ *
+ * RVU Active Program Counter Register
+ */
+union rvu_priv_active_pc {
+	u64 u;
+	struct rvu_priv_active_pc_s {
+		u64 active_pc                        : 64;
+	} s;
+	/* struct rvu_priv_active_pc_s cn; */
+};
+
+static inline u64 RVU_PRIV_ACTIVE_PC(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_ACTIVE_PC(void)
+{
+	return 0x8000030;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_block_type#_rev
+ *
+ * RVU Privileged Block Type Revision Registers These registers are used
+ * by configuration software to specify the revision ID of each block
+ * type enumerated by RVU_BLOCK_TYPE_E, to assist VF/PF software
+ * discovery.
+ */
+union rvu_priv_block_typex_rev {
+	u64 u;
+	struct rvu_priv_block_typex_rev_s {
+		u64 rid                              : 8;
+		u64 reserved_8_63                    : 56;
+	} s;
+	/* struct rvu_priv_block_typex_rev_s cn; */
+};
+
+static inline u64 RVU_PRIV_BLOCK_TYPEX_REV(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_BLOCK_TYPEX_REV(u64 a)
+{
+	return 0x8000400 + 8 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_clk_cfg
+ *
+ * RVU Privileged General Configuration Register
+ */
+union rvu_priv_clk_cfg {
+	u64 u;
+	struct rvu_priv_clk_cfg_s {
+		u64 blk_clken                        : 1;
+		u64 ncbi_clken                       : 1;
+		u64 reserved_2_63                    : 62;
+	} s;
+	/* struct rvu_priv_clk_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_CLK_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_CLK_CFG(void)
+{
+	return 0x8000020;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_const
+ *
+ * RVU Privileged Constants Register This register contains constants for
+ * software discovery.
+ */
+union rvu_priv_const {
+	u64 u;
+	struct rvu_priv_const_s {
+		u64 max_msix                         : 20;
+		u64 hwvfs                            : 12;
+		u64 pfs                              : 8;
+		u64 max_vfs_per_pf                   : 8;
+		u64 reserved_48_63                   : 16;
+	} s;
+	/* struct rvu_priv_const_s cn; */
+};
+
+static inline u64 RVU_PRIV_CONST(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_CONST(void)
+{
+	return 0x8000000;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_gen_cfg
+ *
+ * RVU Privileged General Configuration Register
+ */
+union rvu_priv_gen_cfg {
+	u64 u;
+	struct rvu_priv_gen_cfg_s {
+		u64 lock                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_priv_gen_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_GEN_CFG(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_GEN_CFG(void)
+{
+	return 0x8000010;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_cpt#_cfg
+ *
+ * RVU Privileged Hardware VF CPT Configuration Registers Similar to
+ * RVU_PRIV_HWVF()_NIX()_CFG, but for CPT({a}) block.
+ */
+union rvu_priv_hwvfx_cptx_cfg {
+	u64 u;
+	struct rvu_priv_hwvfx_cptx_cfg_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct rvu_priv_hwvfx_cptx_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_CPTX_CFG(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_CPTX_CFG(u64 a, u64 b)
+{
+	return 0x8001350 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_int_cfg
+ *
+ * RVU Privileged Hardware VF Interrupt Configuration Registers
+ */
+union rvu_priv_hwvfx_int_cfg {
+	u64 u;
+	struct rvu_priv_hwvfx_int_cfg_s {
+		u64 msix_offset                      : 11;
+		u64 reserved_11                      : 1;
+		u64 msix_size                        : 8;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct rvu_priv_hwvfx_int_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_INT_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_INT_CFG(u64 a)
+{
+	return 0x8001280 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_nix#_cfg
+ *
+ * RVU Privileged Hardware VF NIX Configuration Registers These registers
+ * are used to assist VF software discovery. For each HWVF, if the HWVF
+ * is mapped to a VF by RVU_PRIV_PF()_CFG[FIRST_HWVF,NVF], software
+ * writes NIX block's resource configuration for the VF in this register.
+ * The VF driver can read RVU_VF_BLOCK_ADDR()_DISC to discover the
+ * configuration.
+ */
+union rvu_priv_hwvfx_nixx_cfg {
+	u64 u;
+	struct rvu_priv_hwvfx_nixx_cfg_s {
+		u64 has_lf                           : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_priv_hwvfx_nixx_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_NIXX_CFG(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_NIXX_CFG(u64 a, u64 b)
+{
+	return 0x8001300 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_npa_cfg
+ *
+ * RVU Privileged Hardware VF NPA Configuration Registers Similar to
+ * RVU_PRIV_HWVF()_NIX()_CFG, but for NPA block.
+ */
+union rvu_priv_hwvfx_npa_cfg {
+	u64 u;
+	struct rvu_priv_hwvfx_npa_cfg_s {
+		u64 has_lf                           : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_priv_hwvfx_npa_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_NPA_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_NPA_CFG(u64 a)
+{
+	return 0x8001310 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_sso_cfg
+ *
+ * RVU Privileged Hardware VF SSO Configuration Registers Similar to
+ * RVU_PRIV_HWVF()_NIX()_CFG, but for SSO block.
+ */
+union rvu_priv_hwvfx_sso_cfg {
+	u64 u;
+	struct rvu_priv_hwvfx_sso_cfg_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct rvu_priv_hwvfx_sso_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_SSO_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_SSO_CFG(u64 a)
+{
+	return 0x8001320 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_ssow_cfg
+ *
+ * RVU Privileged Hardware VF SSO Work Slot Configuration Registers
+ * Similar to RVU_PRIV_HWVF()_NIX()_CFG, but for SSOW block.
+ */
+union rvu_priv_hwvfx_ssow_cfg {
+	u64 u;
+	struct rvu_priv_hwvfx_ssow_cfg_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct rvu_priv_hwvfx_ssow_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_SSOW_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_SSOW_CFG(u64 a)
+{
+	return 0x8001330 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_hwvf#_tim_cfg
+ *
+ * RVU Privileged Hardware VF SSO Work Slot Configuration Registers
+ * Similar to RVU_PRIV_HWVF()_NIX()_CFG, but for TIM block.
+ */
+union rvu_priv_hwvfx_tim_cfg {
+	u64 u;
+	struct rvu_priv_hwvfx_tim_cfg_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct rvu_priv_hwvfx_tim_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_HWVFX_TIM_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_HWVFX_TIM_CFG(u64 a)
+{
+	return 0x8001340 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_cfg
+ *
+ * RVU Privileged PF Configuration Registers
+ */
+union rvu_priv_pfx_cfg {
+	u64 u;
+	struct rvu_priv_pfx_cfg_s {
+		u64 first_hwvf                       : 12;
+		u64 nvf                              : 8;
+		u64 ena                              : 1;
+		u64 af_ena                           : 1;
+		u64 me_flr_ena                       : 1;
+		u64 pf_vf_io_bar4                    : 1;
+		u64 reserved_24_63                   : 40;
+	} s;
+	struct rvu_priv_pfx_cfg_cn96xxp1 {
+		u64 first_hwvf                       : 12;
+		u64 nvf                              : 8;
+		u64 ena                              : 1;
+		u64 af_ena                           : 1;
+		u64 me_flr_ena                       : 1;
+		u64 reserved_23_63                   : 41;
+	} cn96xxp1;
+	/* struct rvu_priv_pfx_cfg_s cn96xxp3; */
+	/* struct rvu_priv_pfx_cfg_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 RVU_PRIV_PFX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_CFG(u64 a)
+{
+	return 0x8000100 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_cpt#_cfg
+ *
+ * RVU Privileged PF CPT Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for CPT({a}) block.
+ */
+union rvu_priv_pfx_cptx_cfg {
+	u64 u;
+	struct rvu_priv_pfx_cptx_cfg_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct rvu_priv_pfx_cptx_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_CPTX_CFG(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_CPTX_CFG(u64 a, u64 b)
+{
+	return 0x8000350 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_id_cfg
+ *
+ * RVU Privileged PF ID Configuration Registers
+ */
+union rvu_priv_pfx_id_cfg {
+	u64 u;
+	struct rvu_priv_pfx_id_cfg_s {
+		u64 pf_devid                         : 8;
+		u64 vf_devid                         : 8;
+		u64 class_code                       : 24;
+		u64 reserved_40_63                   : 24;
+	} s;
+	/* struct rvu_priv_pfx_id_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_ID_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_ID_CFG(u64 a)
+{
+	return 0x8000120 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_int_cfg
+ *
+ * RVU Privileged PF Interrupt Configuration Registers
+ */
+union rvu_priv_pfx_int_cfg {
+	u64 u;
+	struct rvu_priv_pfx_int_cfg_s {
+		u64 msix_offset                      : 11;
+		u64 reserved_11                      : 1;
+		u64 msix_size                        : 8;
+		u64 reserved_20_63                   : 44;
+	} s;
+	/* struct rvu_priv_pfx_int_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_INT_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_INT_CFG(u64 a)
+{
+	return 0x8000200 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_msix_cfg
+ *
+ * RVU Privileged PF MSI-X Configuration Registers These registers
+ * specify MSI-X table sizes and locations for RVU PFs and associated
+ * VFs. Hardware maintains all RVU MSI-X tables in a contiguous memory
+ * region in LLC/DRAM called the MSI-X table region. The table region's
+ * base AF IOVA is specified by RVU_AF_MSIXTR_BASE, and its size as a
+ * multiple of 16-byte RVU_MSIX_VEC_S structures must be less than or
+ * equal to RVU_PRIV_CONST[MAX_MSIX].  A PF's MSI-X table consists of the
+ * following range of RVU_MSIX_VEC_S structures in the table region: *
+ * First index: [PF_MSIXT_OFFSET]. * Last index: [PF_MSIXT_OFFSET] +
+ * [PF_MSIXT_SIZEM1].  If a PF has enabled VFs (associated
+ * RVU_PRIV_PF()_CFG[NVF] is nonzero), then each VF's MSI-X table
+ * consumes the following range of RVU_MSIX_VEC_S structures: * First
+ * index: [VF_MSIXT_OFFSET] + N*([VF_MSIXT_SIZEM1] + 1). * Last index:
+ * [VF_MSIXT_OFFSET] + N*([VF_MSIXT_SIZEM1] + 1) + [VF_MSIXT_SIZEM1].
+ * N=0 for the first VF, N=1 for the second VF, etc.  Different PFs and
+ * VFs must have non-overlapping vector ranges, and the last index of any
+ * range must be less than RVU_PRIV_CONST[MAX_MSIX].
+ */
+union rvu_priv_pfx_msix_cfg {
+	u64 u;
+	struct rvu_priv_pfx_msix_cfg_s {
+		u64 vf_msixt_sizem1                  : 12;
+		u64 vf_msixt_offset                  : 20;
+		u64 pf_msixt_sizem1                  : 12;
+		u64 pf_msixt_offset                  : 20;
+	} s;
+	/* struct rvu_priv_pfx_msix_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_MSIX_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_MSIX_CFG(u64 a)
+{
+	return 0x8000110 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_nix#_cfg
+ *
+ * RVU Privileged PF NIX Configuration Registers These registers are used
+ * to assist PF software discovery. For each enabled RVU PF, software
+ * writes the block's resource configuration for the PF in this register.
+ * The PF driver can read RVU_PF_BLOCK_ADDR()_DISC to discover the
+ * configuration.
+ */
+union rvu_priv_pfx_nixx_cfg {
+	u64 u;
+	struct rvu_priv_pfx_nixx_cfg_s {
+		u64 has_lf                           : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_priv_pfx_nixx_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_NIXX_CFG(u64 a, u64 b)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_NIXX_CFG(u64 a, u64 b)
+{
+	return 0x8000300 + 0x10000 * a + 8 * b;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_npa_cfg
+ *
+ * RVU Privileged PF NPA Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for NPA block.
+ */
+union rvu_priv_pfx_npa_cfg {
+	u64 u;
+	struct rvu_priv_pfx_npa_cfg_s {
+		u64 has_lf                           : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_priv_pfx_npa_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_NPA_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_NPA_CFG(u64 a)
+{
+	return 0x8000310 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_sso_cfg
+ *
+ * RVU Privileged PF SSO Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for SSO block.
+ */
+union rvu_priv_pfx_sso_cfg {
+	u64 u;
+	struct rvu_priv_pfx_sso_cfg_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct rvu_priv_pfx_sso_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_SSO_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_SSO_CFG(u64 a)
+{
+	return 0x8000320 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_ssow_cfg
+ *
+ * RVU Privileged PF SSO Work Slot Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for SSOW block.
+ */
+union rvu_priv_pfx_ssow_cfg {
+	u64 u;
+	struct rvu_priv_pfx_ssow_cfg_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct rvu_priv_pfx_ssow_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_SSOW_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_SSOW_CFG(u64 a)
+{
+	return 0x8000330 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_PF_BAR0) rvu_priv_pf#_tim_cfg
+ *
+ * RVU Privileged PF SSO Work Slot Configuration Registers Similar to
+ * RVU_PRIV_PF()_NIX()_CFG, but for TIM block.
+ */
+union rvu_priv_pfx_tim_cfg {
+	u64 u;
+	struct rvu_priv_pfx_tim_cfg_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_63                    : 55;
+	} s;
+	/* struct rvu_priv_pfx_tim_cfg_s cn; */
+};
+
+static inline u64 RVU_PRIV_PFX_TIM_CFG(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_PRIV_PFX_TIM_CFG(u64 a)
+{
+	return 0x8000340 + 0x10000 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_block_addr#_disc
+ *
+ * RVU VF Block Address Discovery Registers These registers allow each VF
+ * driver to discover block resources that are provisioned to its VF. The
+ * register's BLOCK_ADDR index is enumerated by RVU_BLOCK_ADDR_E.
+ */
+union rvu_vf_block_addrx_disc {
+	u64 u;
+	struct rvu_vf_block_addrx_disc_s {
+		u64 num_lfs                          : 9;
+		u64 reserved_9_10                    : 2;
+		u64 imp                              : 1;
+		u64 rid                              : 8;
+		u64 btype                            : 8;
+		u64 reserved_28_63                   : 36;
+	} s;
+	/* struct rvu_vf_block_addrx_disc_s cn; */
+};
+
+static inline u64 RVU_VF_BLOCK_ADDRX_DISC(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_BLOCK_ADDRX_DISC(u64 a)
+{
+	return 0x200 + 8 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_int
+ *
+ * RVU VF Interrupt Registers
+ */
+union rvu_vf_int {
+	u64 u;
+	struct rvu_vf_int_s {
+		u64 mbox                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_vf_int_s cn; */
+};
+
+static inline u64 RVU_VF_INT(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_INT(void)
+{
+	return 0x20;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_int_ena_w1c
+ *
+ * RVU VF Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union rvu_vf_int_ena_w1c {
+	u64 u;
+	struct rvu_vf_int_ena_w1c_s {
+		u64 mbox                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_vf_int_ena_w1c_s cn; */
+};
+
+static inline u64 RVU_VF_INT_ENA_W1C(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_INT_ENA_W1C(void)
+{
+	return 0x38;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_int_ena_w1s
+ *
+ * RVU VF Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union rvu_vf_int_ena_w1s {
+	u64 u;
+	struct rvu_vf_int_ena_w1s_s {
+		u64 mbox                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_vf_int_ena_w1s_s cn; */
+};
+
+static inline u64 RVU_VF_INT_ENA_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_INT_ENA_W1S(void)
+{
+	return 0x30;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_int_w1s
+ *
+ * RVU VF Interrupt Set Register This register sets interrupt bits.
+ */
+union rvu_vf_int_w1s {
+	u64 u;
+	struct rvu_vf_int_w1s_s {
+		u64 mbox                             : 1;
+		u64 reserved_1_63                    : 63;
+	} s;
+	/* struct rvu_vf_int_w1s_s cn; */
+};
+
+static inline u64 RVU_VF_INT_W1S(void)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_INT_W1S(void)
+{
+	return 0x28;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_msix_pba#
+ *
+ * RVU VF MSI-X Pending-Bit-Array Registers This register is the MSI-X VF
+ * PBA table.
+ */
+union rvu_vf_msix_pbax {
+	u64 u;
+	struct rvu_vf_msix_pbax_s {
+		u64 pend                             : 64;
+	} s;
+	/* struct rvu_vf_msix_pbax_s cn; */
+};
+
+static inline u64 RVU_VF_MSIX_PBAX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_MSIX_PBAX(u64 a)
+{
+	return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_msix_vec#_addr
+ *
+ * RVU VF MSI-X Vector-Table Address Registers These registers and
+ * RVU_VF_MSIX_VEC()_CTL form the VF MSI-X vector table. The number of
+ * MSI-X vectors for a given VF is specified by
+ * RVU_PRIV_PF()_MSIX_CFG[VF_MSIXT_SIZEM1] (plus 1).  Software must do a
+ * read after any writes to the MSI-X vector table to ensure that the
+ * writes have completed before interrupts are generated to the modified
+ * vectors.
+ */
+union rvu_vf_msix_vecx_addr {
+	u64 u;
+	struct rvu_vf_msix_vecx_addr_s {
+		u64 secvec                           : 1;
+		u64 reserved_1                       : 1;
+		u64 addr                             : 51;
+		u64 reserved_53_63                   : 11;
+	} s;
+	/* struct rvu_vf_msix_vecx_addr_s cn; */
+};
+
+static inline u64 RVU_VF_MSIX_VECX_ADDR(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_MSIX_VECX_ADDR(u64 a)
+{
+	return 0x80000 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_msix_vec#_ctl
+ *
+ * RVU VF MSI-X Vector-Table Control and Data Registers These registers
+ * and RVU_VF_MSIX_VEC()_ADDR form the VF MSI-X vector table.
+ */
+union rvu_vf_msix_vecx_ctl {
+	u64 u;
+	struct rvu_vf_msix_vecx_ctl_s {
+		u64 data                             : 32;
+		u64 mask                             : 1;
+		u64 reserved_33_63                   : 31;
+	} s;
+	/* struct rvu_vf_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 RVU_VF_MSIX_VECX_CTL(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_MSIX_VECX_CTL(u64 a)
+{
+	return 0x80008 + 0x10 * a;
+}
+
+/**
+ * Register (RVU_VF_BAR2) rvu_vf_vfpf_mbox#
+ *
+ * RVU VF/PF Mailbox Registers
+ */
+union rvu_vf_vfpf_mboxx {
+	u64 u;
+	struct rvu_vf_vfpf_mboxx_s {
+		u64 data                             : 64;
+	} s;
+	/* struct rvu_vf_vfpf_mboxx_s cn; */
+};
+
+static inline u64 RVU_VF_VFPF_MBOXX(u64 a)
+	__attribute__ ((pure, always_inline));
+static inline u64 RVU_VF_VFPF_MBOXX(u64 a)
+{
+	return 0 + 8 * a;
+}
+
+#endif /* __CSRS_RVU_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/gpio.h
new file mode 100644
index 000000000..3943ffd95
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/gpio.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/smc-id.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/smc-id.h
new file mode 100644
index 000000000..93a81b295
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/smc-id.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SMC_ID_H__
+#define __SMC_ID_H__
+
+/* SMC function IDs for general purpose queries */
+
+#define OCTEONTX2_SVC_CALL_COUNT	0xc200ff00
+#define OCTEONTX2_SVC_UID		0xc200ff01
+
+#define OCTEONTX2_SVC_VERSION		0xc200ff03
+
+/* OcteonTX Service Calls version numbers */
+#define OCTEONTX2_VERSION_MAJOR	0x1
+#define OCTEONTX2_VERSION_MINOR	0x0
+
+/* x1 - node number */
+#define OCTEONTX2_DRAM_SIZE		0xc2000301
+#define OCTEONTX2_NODE_COUNT		0xc2000601
+#define OCTEONTX2_DISABLE_RVU_LFS	0xc2000b01
+
+#define OCTEONTX2_CONFIG_OOO		0xc2000b04
+
+/* fail safe */
+#define OCTEONTX2_FSAFE_PR_BOOT_SUCCESS	0xc2000b02
+
+#endif /* __SMC_ID_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/smc.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/smc.h
new file mode 100644
index 000000000..8e719a2aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/smc.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SMC_H__
+#define __SMC_H__
+
+#include <asm/arch/smc-id.h>
+
+ssize_t smc_configure_ooo(unsigned int val);
+ssize_t smc_dram_size(unsigned int node);
+ssize_t smc_disable_rvu_lfs(unsigned int node);
+ssize_t smc_flsf_fw_booted(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-octeontx2/soc.h b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/soc.h
new file mode 100644
index 000000000..9cf6628da
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-octeontx2/soc.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SOC_H__
+#define __SOC_H__
+
+/* Product PARTNUM */
+#define CN81XX	0xA2
+#define CN83XX	0xA3
+#define CN96XX	0xB2
+#define CN95XX	0xB3
+
+/* Register defines */
+
+#define otx_is_soc(soc)	(read_partnum() == (soc))
+#define otx_is_board(model) (!strcmp(read_board_name(), model))
+#define otx_is_platform(platform) (read_platform() == (platform))
+
+enum platform_t {
+	PLATFORM_HW = 0,
+	PLATFORM_EMULATOR = 1,
+	PLATFORM_ASIM = 3,
+};
+
+int read_platform(void);
+u8 read_partnum(void);
+const char *read_board_name(void);
+
+#endif /* __SOC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/am35x_def.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/am35x_def.h
new file mode 100644
index 000000000..33f6db199
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/am35x_def.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * am35x_def.h - TI's AM35x specific definitions.
+ *
+ * Based on arch/arm/include/asm/arch-omap3/cpu.h
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Copyright (c) 2010 Texas Instruments Incorporated
+ */
+
+#ifndef _AM35X_DEF_H_
+#define _AM35X_DEF_H_
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+
+/* LVL_INTR_CLEAR bits */
+#define USBOTGSS_INT_CLR	(1 << 4)
+
+/* IP_SW_RESET bits */
+#define USBOTGSS_SW_RST		(1 << 0)	/* reset USBOTG */
+#define CPGMACSS_SW_RST		(1 << 1)	/* reset CPGMAC */
+
+/* DEVCONF2 bits */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
+
+/* General register mappings of system control module */
+#define AM35X_SCM_GEN_BASE	0x48002270
+struct am35x_scm_general {
+	u32 res1[0xC4];		/* 0x000 - 0x30C */
+	u32 devconf2;		/* 0x310 */
+	u32 devconf3;		/* 0x314 */
+	u32 res2[0x2];		/* 0x318 - 0x31C */
+	u32 cba_priority;	/* 0x320 */
+	u32 lvl_intr_clr;	/* 0x324 */
+	u32 ip_sw_reset;	/* 0x328 */
+	u32 ipss_clk_ctrl;	/* 0x32C */
+};
+#define am35x_scm_general_regs ((struct am35x_scm_general *)AM35X_SCM_GEN_BASE)
+
+#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
+
+#endif /*__ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#endif /* _AM35X_DEF_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/clock.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/clock.h
new file mode 100644
index 000000000..ac537fcd3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/clock.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ */
+#ifndef _CLOCKS_H_
+#define _CLOCKS_H_
+
+#define LDELAY		12000000
+
+#define S12M		12000000
+#define S13M		13000000
+#define S19_2M		19200000
+#define S24M		24000000
+#define S26M		26000000
+#define S38_4M		38400000
+
+#define FCK_IVA2_ON	0x00000001
+#define FCK_CORE1_ON	0x03fffe29
+#define ICK_CORE1_ON	0x3ffffffb
+#define ICK_CORE2_ON	0x0000001f
+#define FCK_WKUP_ON	0x000000e9
+#define ICK_WKUP_ON	0x0000003f
+#define FCK_DSS_ON	0x00000005
+#define ICK_DSS_ON	0x00000001
+#define FCK_CAM_ON	0x00000001
+#define ICK_CAM_ON	0x00000001
+
+/* Used to index into DPLL parameter tables */
+typedef struct {
+	unsigned int m;
+	unsigned int n;
+	unsigned int fsel;
+	unsigned int m2;
+} dpll_param;
+
+struct dpll_per_36x_param {
+	unsigned int sys_clk;
+	unsigned int m;
+	unsigned int n;
+	unsigned int m2;
+	unsigned int m3;
+	unsigned int m4;
+	unsigned int m5;
+	unsigned int m6;
+	unsigned int m2div;
+};
+
+/* Following functions are exported from lowlevel_init.S */
+extern dpll_param *get_mpu_dpll_param(void);
+extern dpll_param *get_iva_dpll_param(void);
+extern dpll_param *get_core_dpll_param(void);
+extern dpll_param *get_per_dpll_param(void);
+extern dpll_param *get_per2_dpll_param(void);
+
+extern dpll_param *get_36x_mpu_dpll_param(void);
+extern dpll_param *get_36x_iva_dpll_param(void);
+extern dpll_param *get_36x_core_dpll_param(void);
+extern dpll_param *get_36x_per_dpll_param(void);
+extern dpll_param *get_36x_per2_dpll_param(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/clocks_omap3.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/clocks_omap3.h
new file mode 100644
index 000000000..48bb391f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/clocks_omap3.h
@@ -0,0 +1,347 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ */
+#ifndef _CLOCKS_OMAP3_H_
+#define _CLOCKS_OMAP3_H_
+
+#define PLL_STOP		1	/* PER & IVA */
+#define PLL_LOW_POWER_BYPASS	5	/* MPU, IVA & CORE */
+#define PLL_FAST_RELOCK_BYPASS	6	/* CORE */
+#define PLL_LOCK		7	/* MPU, IVA, CORE & PER */
+
+/*
+ * The following configurations are OPP and SysClk value independant
+ * and hence are defined here. All the other DPLL related values are
+ * tabulated in lowlevel_init.S.
+ */
+
+/* CORE DPLL */
+#define CORE_M3X2	2	/* 332MHz : CM_CLKSEL1_EMU */
+#define CORE_SSI_DIV	3	/* 221MHz : CM_CLKSEL_CORE */
+#define CORE_FUSB_DIV	2	/* 41.5MHz: */
+#define CORE_L4_DIV	2	/* 83MHz  : L4 */
+#define CORE_L3_DIV	2	/* 166MHz : L3 {DDR} */
+#define GFX_DIV		2	/* 83MHz  : CM_CLKSEL_GFX */
+#define GFX_DIV_36X	5	/* 200MHz : CM_CLKSEL_GFX */
+#define WKUP_RSM	2	/* 41.5MHz: CM_CLKSEL_WKUP */
+
+/* PER DPLL */
+#define PER_M6X2	3	/* 288MHz: CM_CLKSEL1_EMU */
+#define PER_M5X2	4	/* 216MHz: CM_CLKSEL_CAM */
+#define PER_M4X2	2	/* 432MHz: CM_CLKSEL_DSS-dss1 */
+#define PER_M3X2	16	/* 54MHz : CM_CLKSEL_DSS-tv */
+
+#define CLSEL1_EMU_VAL ((CORE_M3X2 << 16) | (PER_M6X2 << 24) | (0x0A50))
+
+/* MPU DPLL */
+
+#define MPU_M_12_ES1		0x0FE
+#define MPU_N_12_ES1		0x07
+#define MPU_FSEL_12_ES1		0x05
+#define MPU_M2_12_ES1		0x01
+
+#define MPU_M_12_ES2		0x0FA
+#define MPU_N_12_ES2		0x05
+#define MPU_FSEL_12_ES2		0x07
+#define MPU_M2_ES2		0x01
+
+#define MPU_M_12		0x085
+#define MPU_N_12		0x05
+#define MPU_FSEL_12		0x07
+#define MPU_M2_12		0x01
+
+#define MPU_M_13_ES1		0x17D
+#define MPU_N_13_ES1		0x0C
+#define MPU_FSEL_13_ES1		0x03
+#define MPU_M2_13_ES1		0x01
+
+#define MPU_M_13_ES2		0x258
+#define MPU_N_13_ES2		0x0C
+#define MPU_FSEL_13_ES2		0x03
+#define MPU_M2_13_ES2		0x01
+
+#define MPU_M_13		0x10A
+#define MPU_N_13		0x0C
+#define MPU_FSEL_13		0x03
+#define MPU_M2_13		0x01
+
+#define MPU_M_19P2_ES1		0x179
+#define MPU_N_19P2_ES1		0x12
+#define MPU_FSEL_19P2_ES1	0x04
+#define MPU_M2_19P2_ES1		0x01
+
+#define MPU_M_19P2_ES2		0x271
+#define MPU_N_19P2_ES2		0x17
+#define MPU_FSEL_19P2_ES2	0x03
+#define MPU_M2_19P2_ES2		0x01
+
+#define MPU_M_19P2		0x14C
+#define MPU_N_19P2		0x17
+#define MPU_FSEL_19P2		0x03
+#define MPU_M2_19P2		0x01
+
+#define MPU_M_26_ES1		0x17D
+#define MPU_N_26_ES1		0x19
+#define MPU_FSEL_26_ES1		0x03
+#define MPU_M2_26_ES1		0x01
+
+#define MPU_M_26_ES2		0x0FA
+#define MPU_N_26_ES2		0x0C
+#define MPU_FSEL_26_ES2		0x07
+#define MPU_M2_26_ES2		0x01
+
+#define MPU_M_26		0x085
+#define MPU_N_26		0x0C
+#define MPU_FSEL_26		0x07
+#define MPU_M2_26		0x01
+
+#define MPU_M_38P4_ES1		0x1FA
+#define MPU_N_38P4_ES1		0x32
+#define MPU_FSEL_38P4_ES1	0x03
+#define MPU_M2_38P4_ES1		0x01
+
+#define MPU_M_38P4_ES2		0x271
+#define MPU_N_38P4_ES2		0x2F
+#define MPU_FSEL_38P4_ES2	0x03
+#define MPU_M2_38P4_ES2		0x01
+
+#define MPU_M_38P4		0x14C
+#define MPU_N_38P4		0x2F
+#define MPU_FSEL_38P4		0x03
+#define MPU_M2_38P4		0x01
+
+/* IVA DPLL */
+
+#define IVA_M_12_ES1		0x07D
+#define IVA_N_12_ES1		0x05
+#define IVA_FSEL_12_ES1		0x07
+#define IVA_M2_12_ES1		0x01
+
+#define IVA_M_12_ES2		0x0B4
+#define IVA_N_12_ES2		0x05
+#define IVA_FSEL_12_ES2		0x07
+#define IVA_M2_12_ES2		0x01
+
+#define IVA_M_12		0x085
+#define IVA_N_12		0x05
+#define IVA_FSEL_12		0x07
+#define IVA_M2_12		0x01
+
+#define IVA_M_13_ES1		0x0FA
+#define IVA_N_13_ES1		0x0C
+#define IVA_FSEL_13_ES1		0x03
+#define IVA_M2_13_ES1		0x01
+
+#define IVA_M_13_ES2		0x168
+#define IVA_N_13_ES2		0x0C
+#define IVA_FSEL_13_ES2		0x03
+#define IVA_M2_13_ES2		0x01
+
+#define IVA_M_13		0x10A
+#define IVA_N_13		0x0C
+#define IVA_FSEL_13		0x03
+#define IVA_M2_13		0x01
+
+#define IVA_M_19P2_ES1		0x082
+#define IVA_N_19P2_ES1		0x09
+#define IVA_FSEL_19P2_ES1	0x07
+#define IVA_M2_19P2_ES1		0x01
+
+#define IVA_M_19P2_ES2		0x0E1
+#define IVA_N_19P2_ES2		0x0B
+#define IVA_FSEL_19P2_ES2	0x06
+#define IVA_M2_19P2_ES2		0x01
+
+#define IVA_M_19P2		0x14C
+#define IVA_N_19P2		0x17
+#define IVA_FSEL_19P2		0x03
+#define IVA_M2_19P2		0x01
+
+#define IVA_M_26_ES1		0x07D
+#define IVA_N_26_ES1		0x0C
+#define IVA_FSEL_26_ES1		0x07
+#define IVA_M2_26_ES1		0x01
+
+#define IVA_M_26_ES2		0x0B4
+#define IVA_N_26_ES2		0x0C
+#define IVA_FSEL_26_ES2		0x07
+#define IVA_M2_26_ES2		0x01
+
+#define IVA_M_26		0x085
+#define IVA_N_26		0x0C
+#define IVA_FSEL_26		0x07
+#define IVA_M2_26		0x01
+
+#define IVA_M_38P4_ES1		0x13F
+#define IVA_N_38P4_ES1		0x30
+#define IVA_FSEL_38P4_ES1	0x03
+#define IVA_M2_38P4_ES1		0x01
+
+#define IVA_M_38P4_ES2		0x0E1
+#define IVA_N_38P4_ES2		0x17
+#define IVA_FSEL_38P4_ES2	0x06
+#define IVA_M2_38P4_ES2		0x01
+
+#define IVA_M_38P4		0x14C
+#define IVA_N_38P4		0x2F
+#define IVA_FSEL_38P4		0x03
+#define IVA_M2_38P4		0x01
+
+/* CORE DPLL */
+
+#define CORE_M_12		0xA6
+#define CORE_N_12		0x05
+#define CORE_FSEL_12		0x07
+#define CORE_M2_12		0x01	/* M3 of 2 */
+
+#define CORE_M_12_ES1		0x19F
+#define CORE_N_12_ES1		0x0E
+#define CORE_FSL_12_ES1		0x03
+#define CORE_M2_12_ES1		0x1	/* M3 of 2 */
+
+#define CORE_M_13		0x14C
+#define CORE_N_13		0x0C
+#define CORE_FSEL_13		0x03
+#define CORE_M2_13		0x01	/* M3 of 2 */
+
+#define CORE_M_13_ES1		0x1B2
+#define CORE_N_13_ES1		0x10
+#define CORE_FSL_13_ES1		0x03
+#define CORE_M2_13_ES1		0x01	/* M3 of 2 */
+
+#define CORE_M_19P2		0x19F
+#define CORE_N_19P2		0x17
+#define CORE_FSEL_19P2		0x03
+#define CORE_M2_19P2		0x01	/* M3 of 2 */
+
+#define CORE_M_19P2_ES1		0x19F
+#define CORE_N_19P2_ES1		0x17
+#define CORE_FSL_19P2_ES1	0x03
+#define CORE_M2_19P2_ES1	0x01	/* M3 of 2 */
+
+#define CORE_M_26		0xA6
+#define CORE_N_26		0x0C
+#define CORE_FSEL_26		0x07
+#define CORE_M2_26		0x01	/* M3 of 2 */
+
+#define CORE_M_26_ES1		0x1B2
+#define CORE_N_26_ES1		0x21
+#define CORE_FSL_26_ES1		0x03
+#define CORE_M2_26_ES1		0x01	/* M3 of 2 */
+
+#define CORE_M_38P4		0x19F
+#define CORE_N_38P4		0x2F
+#define CORE_FSEL_38P4		0x03
+#define CORE_M2_38P4		0x01	/* M3 of 2 */
+
+#define CORE_M_38P4_ES1		0x19F
+#define CORE_N_38P4_ES1		0x2F
+#define CORE_FSL_38P4_ES1	0x03
+#define CORE_M2_38P4_ES1	0x01	/* M3 of 2 */
+
+/* PER DPLL */
+
+#define PER_M_12		0xD8
+#define PER_N_12		0x05
+#define PER_FSEL_12		0x07
+#define PER_M2_12		0x09
+
+#define PER_M_13		0x1B0
+#define PER_N_13		0x0C
+#define PER_FSEL_13		0x03
+#define PER_M2_13		0x09
+
+#define PER_M_19P2		0xE1
+#define PER_N_19P2		0x09
+#define PER_FSEL_19P2		0x07
+#define PER_M2_19P2		0x09
+
+#define PER_M_26		0xD8
+#define PER_N_26		0x0C
+#define PER_FSEL_26		0x07
+#define PER_M2_26		0x09
+
+#define PER_M_38P4		0xE1
+#define PER_N_38P4		0x13
+#define PER_FSEL_38P4		0x07
+#define PER_M2_38P4		0x09
+
+/* PER2 DPLL */
+#define PER2_M_12		0x78
+#define PER2_N_12		0x0B
+#define PER2_FSEL_12		0x03
+#define PER2_M2_12		0x01
+
+#define PER2_M_13		0x78
+#define PER2_N_13		0x0C
+#define PER2_FSEL_13		0x03
+#define PER2_M2_13		0x01
+
+#define PER2_M_19P2		0x2EE
+#define PER2_N_19P2		0x0B
+#define PER2_FSEL_19P2		0x06
+#define PER2_M2_19P2		0x0A
+
+#define PER2_M_26		0x78
+#define PER2_N_26		0x0C
+#define PER2_FSEL_26		0x03
+#define PER2_M2_26		0x01
+
+#define PER2_M_38P4		0x2EE
+#define PER2_N_38P4		0x0B
+#define PER2_FSEL_38P4		0x06
+#define PER2_M2_38P4		0x0A
+
+/* 36XX PER DPLL */
+
+#define PER_36XX_M_12		0x1B0
+#define PER_36XX_N_12		0x05
+#define PER_36XX_FSEL_12	0x07
+#define PER_36XX_M2_12		0x09
+
+#define PER_36XX_M_13		0x360
+#define PER_36XX_N_13		0x0C
+#define PER_36XX_FSEL_13	0x03
+#define PER_36XX_M2_13		0x09
+
+#define PER_36XX_M_19P2		0x1C2
+#define PER_36XX_N_19P2		0x09
+#define PER_36XX_FSEL_19P2	0x07
+#define PER_36XX_M2_19P2	0x09
+
+#define PER_36XX_M_26		0x1B0
+#define PER_36XX_N_26		0x0C
+#define PER_36XX_FSEL_26	0x07
+#define PER_36XX_M2_26		0x09
+
+#define PER_36XX_M_38P4		0x1C2
+#define PER_36XX_N_38P4		0x13
+#define PER_36XX_FSEL_38P4	0x07
+#define PER_36XX_M2_38P4	0x09
+
+/* 36XX PER2 DPLL */
+
+#define PER2_36XX_M_12		0x50
+#define PER2_36XX_N_12		0x00
+#define PER2_36XX_M2_12		0x08
+
+#define PER2_36XX_M_13		0x1BB
+#define PER2_36XX_N_13		0x05
+#define PER2_36XX_M2_13		0x08
+
+#define PER2_36XX_M_19P2		0x32
+#define PER2_36XX_N_19P2		0x00
+#define PER2_36XX_M2_19P2		0x08
+
+#define PER2_36XX_M_26		0x1BB
+#define PER2_36XX_N_26		0x0B
+#define PER2_36XX_M2_26		0x08
+
+#define PER2_36XX_M_38P4		0x19
+#define PER2_36XX_N_38P4		0x00
+#define PER2_36XX_M2_38P4		0x08
+
+#endif	/* endif _CLOCKS_OMAP3_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/cpu.h
new file mode 100644
index 000000000..3f0182e76
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/cpu.h
@@ -0,0 +1,504 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ */
+
+#ifndef _CPU_H
+#define _CPU_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+/* Register offsets of common modules */
+/* Control */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct ctrl {
+	u8 res1[0xC0];
+	u16 gpmc_nadv_ale;	/* 0xC0 */
+	u16 gpmc_noe;		/* 0xC2 */
+	u16 gpmc_nwe;		/* 0xC4 */
+	u8 res2[0x22A];
+	u32 status;		/* 0x2F0 */
+	u32 gpstatus;		/* 0x2F4 */
+	u8 res3[0x08];
+	u32 rpubkey_0;		/* 0x300 */
+	u32 rpubkey_1;		/* 0x304 */
+	u32 rpubkey_2;		/* 0x308 */
+	u32 rpubkey_3;		/* 0x30C */
+	u32 rpubkey_4;		/* 0x310 */
+	u8 res4[0x04];
+	u32 randkey_0;		/* 0x318 */
+	u32 randkey_1;		/* 0x31C */
+	u32 randkey_2;		/* 0x320 */
+	u32 randkey_3;		/* 0x324 */
+	u8 res5[0x124];
+	u32 ctrl_omap_stat;	/* 0x44C */
+};
+#else /* __ASSEMBLY__ */
+#define CONTROL_STATUS		0x2F0
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct ctrl_id {
+	u8 res1[0x4];
+	u32 idcode;		/* 0x04 */
+	u32 prod_id;		/* 0x08 */
+	u32 sku_id;		/* 0x0c */
+	u8 res2[0x08];
+	u32 die_id_0;		/* 0x18 */
+	u32 die_id_1;		/* 0x1C */
+	u32 die_id_2;		/* 0x20 */
+	u32 die_id_3;		/* 0x24 */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* boot pin mask */
+#define SYSBOOT_MASK		0x1F
+
+/* device speed */
+#define SKUID_CLK_MASK		0xf
+#define SKUID_CLK_600MHZ	0x0
+#define SKUID_CLK_720MHZ	0x8
+
+#define GPMC_BASE		(OMAP34XX_GPMC_BASE)
+#define GPMC_CONFIG_CS0		0x60
+#define GPMC_CONFIG_CS0_BASE	(GPMC_BASE + GPMC_CONFIG_CS0)
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifdef __ASSEMBLY__
+#define GPMC_CONFIG1		0x00
+#define GPMC_CONFIG2		0x04
+#define GPMC_CONFIG3		0x08
+#define GPMC_CONFIG4		0x0C
+#define GPMC_CONFIG5		0x10
+#define GPMC_CONFIG6		0x14
+#define GPMC_CONFIG7		0x18
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* GPMC Mapping */
+#define FLASH_BASE		0x10000000	/* NOR flash, */
+						/* aligned to 256 Meg */
+#define FLASH_BASE_SDPV1	0x04000000	/* NOR flash, */
+						/* aligned to 64 Meg */
+#define FLASH_BASE_SDPV2	0x10000000	/* NOR flash, */
+						/* aligned to 256 Meg */
+#define DEBUG_BASE		0x08000000	/* debug board */
+#define NAND_BASE		0x30000000	/* NAND addr */
+						/* (actual size small port) */
+#define ONENAND_MAP		0x20000000	/* OneNand addr */
+						/* (actual size small port) */
+/* SMS */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct sms {
+	u8 res1[0x10];
+	u32 sysconfig;		/* 0x10 */
+	u8 res2[0x34];
+	u32 rg_att0;		/* 0x48 */
+	u8 res3[0x84];
+	u32 class_arb0;		/* 0xD0 */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define BURSTCOMPLETE_GROUP7	(0x1 << 31)
+
+/* SDRC */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct sdrc_cs {
+	u32 mcfg;		/* 0x80 || 0xB0 */
+	u32 mr;			/* 0x84 || 0xB4 */
+	u8 res1[0x4];
+	u32 emr2;		/* 0x8C || 0xBC */
+	u8 res2[0x14];
+	u32 rfr_ctrl;		/* 0x84 || 0xD4 */
+	u32 manual;		/* 0xA8 || 0xD8 */
+	u8 res3[0x4];
+};
+
+struct sdrc_actim {
+	u32 ctrla;		/* 0x9C || 0xC4 */
+	u32 ctrlb;		/* 0xA0 || 0xC8 */
+};
+
+struct sdrc {
+	u8 res1[0x10];
+	u32 sysconfig;		/* 0x10 */
+	u32 status;		/* 0x14 */
+	u8 res2[0x28];
+	u32 cs_cfg;		/* 0x40 */
+	u32 sharing;		/* 0x44 */
+	u8 res3[0x18];
+	u32 dlla_ctrl;		/* 0x60 */
+	u32 dlla_status;	/* 0x64 */
+	u32 dllb_ctrl;		/* 0x68 */
+	u32 dllb_status;	/* 0x6C */
+	u32 power;		/* 0x70 */
+	u8 res4[0xC];
+	struct sdrc_cs cs[2];	/* 0x80 || 0xB0 */
+};
+
+/* EMIF4 */
+typedef struct emif4 {
+	unsigned int emif_mod_id_rev;
+	unsigned int sdram_sts;
+	unsigned int sdram_config;
+	unsigned int res1;
+	unsigned int sdram_refresh_ctrl;
+	unsigned int sdram_refresh_ctrl_shdw;
+	unsigned int sdram_time1;
+	unsigned int sdram_time1_shdw;
+	unsigned int sdram_time2;
+	unsigned int sdram_time2_shdw;
+	unsigned int sdram_time3;
+	unsigned int sdram_time3_shdw;
+	unsigned char res2[8];
+	unsigned int sdram_pwr_mgmt;
+	unsigned int sdram_pwr_mgmt_shdw;
+	unsigned char res3[32];
+	unsigned int sdram_iodft_tlgc;
+	unsigned char res4[128];
+	unsigned int ddr_phyctrl1;
+	unsigned int ddr_phyctrl1_shdw;
+	unsigned int ddr_phyctrl2;
+} emif4_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define DLLPHASE_90		(0x1 << 1)
+#define LOADDLL			(0x1 << 2)
+#define ENADLL			(0x1 << 3)
+#define DLL_DELAY_MASK		0xFF00
+#define DLL_NO_FILTER_MASK	((0x1 << 9) | (0x1 << 8))
+
+#define PAGEPOLICY_HIGH		(0x1 << 0)
+#define SRFRONRESET		(0x1 << 7)
+#define PWDNEN			(0x1 << 2)
+#define WAKEUPPROC		(0x1 << 26)
+
+#define DDR_SDRAM		(0x1 << 0)
+#define DEEPPD			(0x1 << 3)
+#define B32NOT16		(0x1 << 4)
+#define BANKALLOCATION		(0x2 << 6)
+#define RAMSIZE_128		(0x40 << 8) /* RAM size in 2MB chunks */
+#define ADDRMUXLEGACY		(0x1 << 19)
+#define CASWIDTH_10BITS		(0x5 << 20)
+#define RASWIDTH_13BITS		(0x2 << 24)
+#define BURSTLENGTH4		(0x2 << 0)
+#define CASL3			(0x3 << 4)
+#define SDRC_ACTIM_CTRL0_BASE	(OMAP34XX_SDRC_BASE + 0x9C)
+#define SDRC_ACTIM_CTRL1_BASE	(OMAP34XX_SDRC_BASE + 0xC4)
+#define ARE_ARCV_1		(0x1 << 0)
+#define ARCV			(0x4e2 << 8) /* Autorefresh count */
+#define OMAP34XX_SDRC_CS0	0x80000000
+#define OMAP34XX_SDRC_CS1	0xA0000000
+#define CMD_NOP			0x0
+#define CMD_PRECHARGE		0x1
+#define CMD_AUTOREFRESH		0x2
+#define CMD_ENTR_PWRDOWN	0x3
+#define CMD_EXIT_PWRDOWN	0x4
+#define CMD_ENTR_SRFRSH		0x5
+#define CMD_CKE_HIGH		0x6
+#define CMD_CKE_LOW		0x7
+#define SOFTRESET		(0x1 << 1)
+#define SMART_IDLE		(0x2 << 3)
+#define REF_ON_IDLE		(0x1 << 6)
+
+/* DMA */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct dma4_chan {
+	u32 ccr;
+	u32 clnk_ctrl;
+	u32 cicr;
+	u32 csr;
+	u32 csdp;
+	u32 cen;
+	u32 cfn;
+	u32 cssa;
+	u32 cdsa;
+	u32 csel;
+	u32 csfl;
+	u32 cdel;
+	u32 cdfl;
+	u32 csac;
+	u32 cdac;
+	u32 ccen;
+	u32 ccfn;
+	u32 color;
+};
+
+struct dma4 {
+	u32 revision;
+	u8 res1[0x4];
+	u32 irqstatus_l[0x4];
+	u32 irqenable_l[0x4];
+	u32 sysstatus;
+	u32 ocp_sysconfig;
+	u8 res2[0x34];
+	u32 caps_0;
+	u8 res3[0x4];
+	u32 caps_2;
+	u32 caps_3;
+	u32 caps_4;
+	u32 gcr;
+	u8 res4[0x4];
+	struct dma4_chan chan[32];
+};
+
+#endif /*__ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* timer regs offsets (32 bit regs) */
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct gptimer {
+	u32 tidr;	/* 0x00 r */
+	u8 res[0xc];
+	u32 tiocp_cfg;	/* 0x10 rw */
+	u32 tistat;	/* 0x14 r */
+	u32 tisr;	/* 0x18 rw */
+	u32 tier;	/* 0x1c rw */
+	u32 twer;	/* 0x20 rw */
+	u32 tclr;	/* 0x24 rw */
+	u32 tcrr;	/* 0x28 rw */
+	u32 tldr;	/* 0x2c rw */
+	u32 ttgr;	/* 0x30 rw */
+	u32 twpc;	/* 0x34 r*/
+	u32 tmar;	/* 0x38 rw*/
+	u32 tcar1;	/* 0x3c r */
+	u32 tcicr;	/* 0x40 rw */
+	u32 tcar2;	/* 0x44 r */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* enable sys_clk NO-prescale /1 */
+#define GPT_EN			((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
+
+/* Watchdog */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct watchdog {
+	u8 res1[0x34];
+	u32 wwps;	/* 0x34 r */
+	u8 res2[0x10];
+	u32 wspr;	/* 0x48 rw */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+/* PRCM */
+#define PRCM_BASE		0x48004000
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct prcm {
+	u32 fclken_iva2;	/* 0x00 */
+	u32 clken_pll_iva2;	/* 0x04 */
+	u8 res1[0x1c];
+	u32 idlest_pll_iva2;	/* 0x24 */
+	u8 res2[0x18];
+	u32 clksel1_pll_iva2 ;	/* 0x40 */
+	u32 clksel2_pll_iva2;	/* 0x44 */
+	u8 res3[0x8bc];
+	u32 clken_pll_mpu;	/* 0x904 */
+	u8 res4[0x1c];
+	u32 idlest_pll_mpu;	/* 0x924 */
+	u8 res5[0x18];
+	u32 clksel1_pll_mpu;	/* 0x940 */
+	u32 clksel2_pll_mpu;	/* 0x944 */
+	u8 res6[0xb8];
+	u32 fclken1_core;	/* 0xa00 */
+	u32 res_fclken2_core;
+	u32 fclken3_core;	/* 0xa08 */
+	u8 res7[0x4];
+	u32 iclken1_core;	/* 0xa10 */
+	u32 iclken2_core;	/* 0xa14 */
+	u32 iclken3_core;	/* 0xa18 */
+	u8 res8[0x24];
+	u32 clksel_core;	/* 0xa40 */
+	u8 res9[0xbc];
+	u32 fclken_gfx;		/* 0xb00 */
+	u8 res10[0xc];
+	u32 iclken_gfx;		/* 0xb10 */
+	u8 res11[0x2c];
+	u32 clksel_gfx;		/* 0xb40 */
+	u8 res12[0xbc];
+	u32 fclken_wkup;	/* 0xc00 */
+	u8 res13[0xc];
+	u32 iclken_wkup;	/* 0xc10 */
+	u8 res14[0xc];
+	u32 idlest_wkup;	/* 0xc20 */
+	u8 res15[0x1c];
+	u32 clksel_wkup;	/* 0xc40 */
+	u8 res16[0xbc];
+	u32 clken_pll;		/* 0xd00 */
+	u32 clken2_pll;	        /* 0xd04 */
+	u8 res17[0x18];
+	u32 idlest_ckgen;	/* 0xd20 */
+	u32 idlest2_ckgen;	/* 0xd24 */
+	u8 res18[0x18];
+	u32 clksel1_pll;	/* 0xd40 */
+	u32 clksel2_pll;	/* 0xd44 */
+	u32 clksel3_pll;	/* 0xd48 */
+	u32 clksel4_pll;	/* 0xd4c */
+	u32 clksel5_pll;	/* 0xd50 */
+	u8 res19[0xac];
+	u32 fclken_dss;		/* 0xe00 */
+	u8 res20[0xc];
+	u32 iclken_dss;		/* 0xe10 */
+	u8 res21[0x2c];
+	u32 clksel_dss;		/* 0xe40 */
+	u8 res22[0xbc];
+	u32 fclken_cam;		/* 0xf00 */
+	u8 res23[0xc];
+	u32 iclken_cam;		/* 0xf10 */
+	u8 res24[0x2c];
+	u32 clksel_cam;		/* 0xf40 */
+	u8 res25[0xbc];
+	u32 fclken_per;		/* 0x1000 */
+	u8 res26[0xc];
+	u32 iclken_per;		/* 0x1010 */
+	u8 res27[0x2c];
+	u32 clksel_per;		/* 0x1040 */
+	u8 res28[0xfc];
+	u32 clksel1_emu;	/* 0x1140 */
+	u8 res29[0x2bc];
+	u32 fclken_usbhost;	/* 0x1400 */
+	u8 res30[0xc];
+	u32 iclken_usbhost;	/* 0x1410 */
+};
+#else /* __ASSEMBLY__ */
+#define CM_CLKSEL_CORE		0x48004a40
+#define CM_CLKSEL_GFX		0x48004b40
+#define CM_CLKSEL_WKUP		0x48004c40
+#define CM_CLKEN_PLL		0x48004d00
+#define CM_CLKSEL1_PLL		0x48004d40
+#define CM_CLKSEL1_EMU		0x48005140
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define PRM_BASE		0x48306000
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct prm {
+	u8 res1[0xd40];
+	u32 clksel;		/* 0xd40 */
+	u8 res2[0x50c];
+	u32 rstctrl;		/* 0x1250 */
+	u8 res3[0x1c];
+	u32 clksrc_ctrl;	/* 0x1270 */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define PRM_RSTCTRL		0x48307250
+#define PRM_RSTCTRL_RESET	0x04
+#define PRM_RSTST			0x48307258
+#define PRM_RSTST_WARM_RESET_MASK	0x7D2
+#define SYSCLKDIV_1		(0x1 << 6)
+#define SYSCLKDIV_2		(0x1 << 7)
+
+#define CLKSEL_GPT1		(0x1 << 0)
+
+#define EN_GPT1			(0x1 << 0)
+#define EN_32KSYNC		(0x1 << 2)
+
+#define ST_WDT2			(0x1 << 5)
+
+#define ST_MPU_CLK		(0x1 << 0)
+
+#define ST_CORE_CLK		(0x1 << 0)
+
+#define ST_PERIPH_CLK		(0x1 << 1)
+
+#define ST_IVA2_CLK		(0x1 << 0)
+
+#define RESETDONE		(0x1 << 0)
+
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/* SMX-APE */
+#define PM_RT_APE_BASE_ADDR_ARM		(SMX_APE_BASE + 0x10000)
+#define PM_GPMC_BASE_ADDR_ARM		(SMX_APE_BASE + 0x12400)
+#define PM_OCM_RAM_BASE_ADDR_ARM	(SMX_APE_BASE + 0x12800)
+#define PM_IVA2_BASE_ADDR_ARM		(SMX_APE_BASE + 0x14000)
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct pm {
+	u8 res1[0x48];
+	u32 req_info_permission_0;	/* 0x48 */
+	u8 res2[0x4];
+	u32 read_permission_0;		/* 0x50 */
+	u8 res3[0x4];
+	u32 wirte_permission_0;		/* 0x58 */
+	u8 res4[0x4];
+	u32 addr_match_1;		/* 0x58 */
+	u8 res5[0x4];
+	u32 req_info_permission_1;	/* 0x68 */
+	u8 res6[0x14];
+	u32 addr_match_2;		/* 0x80 */
+};
+#endif /*__ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* Permission values for registers -Full fledged permissions to all */
+#define UNLOCK_1			0xFFFFFFFF
+#define UNLOCK_2			0x00000000
+#define UNLOCK_3			0x0000FFFF
+
+#define NOT_EARLY			0
+
+/* I2C base */
+#define I2C_BASE1		(OMAP34XX_CORE_L4_IO_BASE + 0x70000)
+#define I2C_BASE2		(OMAP34XX_CORE_L4_IO_BASE + 0x72000)
+#define I2C_BASE3		(OMAP34XX_CORE_L4_IO_BASE + 0x60000)
+
+/* MUSB base */
+#define MUSB_BASE		(OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+
+/* OMAP3 GPIO registers */
+#define OMAP_GPIO_REVISION		0x0000
+#define OMAP_GPIO_SYSCONFIG		0x0010
+#define OMAP_GPIO_SYSSTATUS		0x0014
+#define OMAP_GPIO_IRQSTATUS1		0x0018
+#define OMAP_GPIO_IRQSTATUS2		0x0028
+#define OMAP_GPIO_IRQENABLE2		0x002c
+#define OMAP_GPIO_IRQENABLE1		0x001c
+#define OMAP_GPIO_WAKE_EN		0x0020
+#define OMAP_GPIO_CTRL			0x0030
+#define OMAP_GPIO_OE			0x0034
+#define OMAP_GPIO_DATAIN		0x0038
+#define OMAP_GPIO_DATAOUT		0x003c
+#define OMAP_GPIO_LEVELDETECT0		0x0040
+#define OMAP_GPIO_LEVELDETECT1		0x0044
+#define OMAP_GPIO_RISINGDETECT		0x0048
+#define OMAP_GPIO_FALLINGDETECT		0x004c
+#define OMAP_GPIO_DEBOUNCE_EN		0x0050
+#define OMAP_GPIO_DEBOUNCE_VAL		0x0054
+#define OMAP_GPIO_CLEARIRQENABLE1	0x0060
+#define OMAP_GPIO_SETIRQENABLE1		0x0064
+#define OMAP_GPIO_CLEARWKUENA		0x0080
+#define OMAP_GPIO_SETWKUENA		0x0084
+#define OMAP_GPIO_CLEARDATAOUT		0x0090
+#define OMAP_GPIO_SETDATAOUT		0x0094
+
+#endif /* _CPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/dma.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/dma.h
new file mode 100644
index 000000000..d26e490d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/dma.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef __SDMA_H
+#define __SDMA_H
+
+/* Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ */
+
+/* Functions */
+void omap3_dma_init(void);
+int omap3_dma_conf_transfer(uint32_t chan, uint32_t *src, uint32_t *dst,
+		uint32_t sze);
+int omap3_dma_start_transfer(uint32_t chan);
+int omap3_dma_wait_for_transfer(uint32_t chan);
+int omap3_dma_conf_chan(uint32_t chan, struct dma4_chan *config);
+int omap3_dma_get_conf_chan(uint32_t chan, struct dma4_chan *config);
+
+/* Register settings */
+#define CSDP_DATA_TYPE_8BIT             0x0
+#define CSDP_DATA_TYPE_16BIT            0x1
+#define CSDP_DATA_TYPE_32BIT            0x2
+#define CSDP_SRC_BURST_SINGLE           (0x0 << 7)
+#define CSDP_SRC_BURST_EN_16BYTES       (0x1 << 7)
+#define CSDP_SRC_BURST_EN_32BYTES       (0x2 << 7)
+#define CSDP_SRC_BURST_EN_64BYTES       (0x3 << 7)
+#define CSDP_DST_BURST_SINGLE           (0x0 << 14)
+#define CSDP_DST_BURST_EN_16BYTES       (0x1 << 14)
+#define CSDP_DST_BURST_EN_32BYTES       (0x2 << 14)
+#define CSDP_DST_BURST_EN_64BYTES       (0x3 << 14)
+#define CSDP_DST_ENDIAN_LOCK_ADAPT      (0x0 << 18)
+#define CSDP_DST_ENDIAN_LOCK_LOCK       (0x1 << 18)
+#define CSDP_DST_ENDIAN_LITTLE          (0x0 << 19)
+#define CSDP_DST_ENDIAN_BIG             (0x1 << 19)
+#define CSDP_SRC_ENDIAN_LOCK_ADAPT      (0x0 << 20)
+#define CSDP_SRC_ENDIAN_LOCK_LOCK       (0x1 << 20)
+#define CSDP_SRC_ENDIAN_LITTLE          (0x0 << 21)
+#define CSDP_SRC_ENDIAN_BIG             (0x1 << 21)
+
+#define CCR_READ_PRIORITY_LOW           (0x0 << 6)
+#define CCR_READ_PRIORITY_HIGH          (0x1 << 6)
+#define CCR_ENABLE_DISABLED             (0x0 << 7)
+#define CCR_ENABLE_ENABLE               (0x1 << 7)
+#define CCR_SRC_AMODE_CONSTANT          (0x0 << 12)
+#define CCR_SRC_AMODE_POST_INC          (0x1 << 12)
+#define CCR_SRC_AMODE_SINGLE_IDX        (0x2 << 12)
+#define CCR_SRC_AMODE_DOUBLE_IDX        (0x3 << 12)
+#define CCR_DST_AMODE_CONSTANT          (0x0 << 14)
+#define CCR_DST_AMODE_POST_INC          (0x1 << 14)
+#define CCR_DST_AMODE_SINGLE_IDX        (0x2 << 14)
+#define CCR_DST_AMODE_SOUBLE_IDX        (0x3 << 14)
+
+#define CCR_RD_ACTIVE_MASK              (1 << 9)
+#define CCR_WR_ACTIVE_MASK              (1 << 10)
+
+#define CSR_TRANS_ERR			(1 << 8)
+#define CSR_SUPERVISOR_ERR		(1 << 10)
+#define CSR_MISALIGNED_ADRS_ERR		(1 << 11)
+
+/* others */
+#define CHAN_NR_MIN			0
+#define CHAN_NR_MAX			31
+
+#endif /* __SDMA_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/dss.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/dss.h
new file mode 100644
index 000000000..8bf6b4895
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/dss.h
@@ -0,0 +1,233 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * Referred to Linux Kernel DSS driver files for OMAP3 by
+ * Tomi Valkeinen from drivers/video/omap2/dss/
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 and any
+ * later version the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef DSS_H
+#define DSS_H
+
+/* DSS Base Registers */
+#define OMAP3_DSS_BASE		0x48050000
+#define OMAP3_DISPC_BASE	0x48050400
+#define OMAP3_VENC_BASE		0x48050C00
+
+/* DSS Registers */
+struct dss_regs {
+	u32 revision;				/* 0x00 */
+	u8 res1[12];				/* 0x04 */
+	u32 sysconfig;				/* 0x10 */
+	u32 sysstatus;				/* 0x14 */
+	u32 irqstatus;				/* 0x18 */
+	u8 res2[36];				/* 0x1C */
+	u32 control;				/* 0x40 */
+	u32 sdi_control;			/* 0x44 */
+	u32 pll_control;			/* 0x48 */
+};
+
+/* DISPC Registers */
+struct dispc_regs {
+	u32 revision;				/* 0x00 */
+	u8 res1[12];				/* 0x04 */
+	u32 sysconfig;				/* 0x10 */
+	u32 sysstatus;				/* 0x14 */
+	u32 irqstatus;				/* 0x18 */
+	u32 irqenable;				/* 0x1C */
+	u8 res2[32];				/* 0x20 */
+	u32 control;				/* 0x40 */
+	u32 config;				/* 0x44 */
+	u32 reserve_2;				/* 0x48 */
+	u32 default_color0;			/* 0x4C */
+	u32 default_color1;			/* 0x50 */
+	u32 trans_color0;			/* 0x54 */
+	u32 trans_color1;			/* 0x58 */
+	u32 line_status;			/* 0x5C */
+	u32 line_number;			/* 0x60 */
+	u32 timing_h;				/* 0x64 */
+	u32 timing_v;				/* 0x68 */
+	u32 pol_freq;				/* 0x6C */
+	u32 divisor;				/* 0x70 */
+	u32 global_alpha;			/* 0x74 */
+	u32 size_dig;				/* 0x78 */
+	u32 size_lcd;				/* 0x7C */
+	u32 gfx_ba0;				/* 0x80 */
+	u32 gfx_ba1;				/* 0x84 */
+	u32 gfx_position;			/* 0x88 */
+	u32 gfx_size;				/* 0x8C */
+	u8 unused[16];				/* 0x90 */
+	u32 gfx_attributes;			/* 0xA0 */
+	u32 gfx_fifo_threshold;			/* 0xA4 */
+	u32 gfx_fifo_size_status;		/* 0xA8 */
+	u32 gfx_row_inc;			/* 0xAC */
+	u32 gfx_pixel_inc;			/* 0xB0 */
+	u32 gfx_window_skip;			/* 0xB4 */
+	u32 gfx_table_ba;			/* 0xB8 */
+};
+
+/* VENC Registers */
+struct venc_regs {
+	u32 rev_id;				/* 0x00 */
+	u32 status;				/* 0x04 */
+	u32 f_control;				/* 0x08 */
+	u32 reserve_1;				/* 0x0C */
+	u32 vidout_ctrl;			/* 0x10 */
+	u32 sync_ctrl;				/* 0x14 */
+	u32 reserve_2;				/* 0x18 */
+	u32 llen;				/* 0x1C */
+	u32 flens;				/* 0x20 */
+	u32 hfltr_ctrl;				/* 0x24 */
+	u32 cc_carr_wss_carr;			/* 0x28 */
+	u32 c_phase;				/* 0x2C */
+	u32 gain_u;				/* 0x30 */
+	u32 gain_v;				/* 0x34 */
+	u32 gain_y;				/* 0x38 */
+	u32 black_level;			/* 0x3C */
+	u32 blank_level;			/* 0x40 */
+	u32 x_color;				/* 0x44 */
+	u32 m_control;				/* 0x48 */
+	u32 bstamp_wss_data;			/* 0x4C */
+	u32 s_carr;				/* 0x50 */
+	u32 line21;				/* 0x54 */
+	u32 ln_sel;				/* 0x58 */
+	u32 l21__wc_ctl;			/* 0x5C */
+	u32 htrigger_vtrigger;			/* 0x60 */
+	u32 savid__eavid;			/* 0x64 */
+	u32 flen__fal;				/* 0x68 */
+	u32 lal__phase_reset;			/* 0x6C */
+	u32 hs_int_start_stop_x;		/* 0x70 */
+	u32 hs_ext_start_stop_x;		/* 0x74 */
+	u32 vs_int_start_x;			/* 0x78 */
+	u32 vs_int_stop_x__vs_int_start_y;	/* 0x7C */
+	u32 vs_int_stop_y__vs_ext_start_x;	/* 0x80 */
+	u32 vs_ext_stop_x__vs_ext_start_y;	/* 0x84 */
+	u32 vs_ext_stop_y;			/* 0x88 */
+	u32 reserve_3;				/* 0x8C */
+	u32 avid_start_stop_x;			/* 0x90 */
+	u32 avid_start_stop_y;			/* 0x94 */
+	u32 reserve_4;				/* 0x98 */
+	u32 reserve_5;				/* 0x9C */
+	u32 fid_int_start_x__fid_int_start_y;	/* 0xA0 */
+	u32 fid_int_offset_y__fid_ext_start_x;	/* 0xA4 */
+	u32 fid_ext_start_y__fid_ext_offset_y;	/* 0xA8 */
+	u32 reserve_6;				/* 0xAC */
+	u32 tvdetgp_int_start_stop_x;		/* 0xB0 */
+	u32 tvdetgp_int_start_stop_y;		/* 0xB4 */
+	u32 gen_ctrl;				/* 0xB8 */
+	u32 reserve_7;				/* 0xBC */
+	u32 reserve_8;				/* 0xC0 */
+	u32 output_control;			/* 0xC4 */
+	u32 dac_b__dac_c;			/* 0xC8 */
+	u32 height_width;			/* 0xCC */
+};
+
+/* Few Register Offsets */
+#define TFTSTN_SHIFT				3
+#define DATALINES_SHIFT				8
+
+#define GFX_ENABLE				1
+#define GFX_FORMAT_SHIFT			1
+#define LOADMODE_SHIFT				1
+
+#define DSS_SOFTRESET				(1 << 1)
+#define DSS_RESETDONE				1
+
+/* Enabling Display controller */
+#define LCD_ENABLE				1
+#define DIG_ENABLE				(1 << 1)
+#define GO_LCD					(1 << 5)
+#define GO_DIG					(1 << 6)
+#define GP_OUT0					(1 << 15)
+#define GP_OUT1					(1 << 16)
+
+/* Configure VENC DSS Params */
+#define VENC_CLK_ENABLE				(1 << 3)
+#define DAC_DEMEN				(1 << 4)
+#define DAC_POWERDN				(1 << 5)
+#define VENC_OUT_SEL				(1 << 6)
+#define DIG_LPP_SHIFT				16
+
+/* LCD display type */
+#define PASSIVE_DISPLAY			0
+#define ACTIVE_DISPLAY			1
+
+/* TFTDATALINES */
+#define LCD_INTERFACE_12_BIT	0
+#define LCD_INTERFACE_16_BIT	1
+#define LCD_INTERFACE_18_BIT	2
+#define LCD_INTERFACE_24_BIT	3
+
+/* Polarity */
+#define DSS_IVS		(1 << 12)
+#define DSS_IHS		(1 << 13)
+#define DSS_IPC		(1 << 14)
+#define DSS_IEO		(1 << 15)
+#define DSS_ONOFF	(1 << 17)
+
+/* GFX format */
+#define GFXFORMAT_BITMAP1		(0x0 << 1)
+#define GFXFORMAT_BITMAP2		(0x1 << 1)
+#define GFXFORMAT_BITMAP4		(0x2 << 1)
+#define GFXFORMAT_BITMAP8		(0x3 << 1)
+#define GFXFORMAT_RGB12			(0x4 << 1)
+#define GFXFORMAT_ARGB16		(0x5 << 1)
+#define GFXFORMAT_RGB16			(0x6 << 1)
+#define GFXFORMAT_RGB24_UNPACKED	(0x8 << 1)
+#define GFXFORMAT_RGB24_PACKED		(0x9 << 1)
+#define GFXFORMAT_ARGB32		(0xC << 1)
+#define GFXFORMAT_RGBA32		(0xD << 1)
+#define GFXFORMAT_RGBx32		(0xE << 1)
+
+/* Panel Configuration */
+struct panel_config {
+	u32 timing_h;
+	u32 timing_v;
+	u32 pol_freq;
+	u32 divisor;
+	u32 lcd_size;
+	u32 panel_type;
+	u32 data_lines;
+	u32 load_mode;
+	u32 panel_color;
+	u32 gfx_format;
+	void *frame_buffer;
+};
+
+#define DSS_HBP(bp)    (((bp) - 1) << 20)
+#define DSS_HFP(fp)    (((fp) - 1) << 8)
+#define DSS_HSW(sw)    ((sw) - 1)
+#define DSS_VBP(bp)    ((bp) << 20)
+#define DSS_VFP(fp)    ((fp) << 8)
+#define DSS_VSW(sw)    ((sw) - 1)
+
+#define PANEL_TIMING_H(bp, fp, sw) (DSS_HBP(bp) | DSS_HFP(fp) | DSS_HSW(sw))
+#define PANEL_TIMING_V(bp, fp, sw) (DSS_VBP(bp) | DSS_VFP(fp) | DSS_VSW(sw))
+#define PANEL_LCD_SIZE(xres, yres) ((yres - 1) << 16 | (xres - 1))
+
+/* Generic DSS Functions */
+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
+			u32 height, u32 width);
+void omap3_dss_panel_config(const struct panel_config *panel_cfg);
+void omap3_dss_enable(void);
+
+#endif /* DSS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/ehci.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/ehci.h
new file mode 100644
index 000000000..fa839ef80
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/ehci.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Alexander Holler <holler@ahsoftware.de>
+ *
+ * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37
+ *
+ * See there for additional Copyrights.
+ */
+#ifndef _OMAP3_EHCI_H_
+#define _OMAP3_EHCI_H_
+
+/* USB/EHCI registers */
+#define OMAP_USBTLL_BASE				0x48062000UL
+#define OMAP_UHH_BASE					0x48064000UL
+#define OMAP_EHCI_BASE					0x48064800UL
+
+/* TLL Register Set */
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE			1
+
+/* UHH Register Set */
+#define OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
+#define OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
+#define OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
+#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE		(1 << 2)
+
+#define OMAP_UHH_SYSCONFIG_VAL		(OMAP_UHH_SYSCONFIG_CACTIVITY | \
+					OMAP_UHH_SYSCONFIG_SIDLEMODE | \
+					OMAP_UHH_SYSCONFIG_ENAWAKEUP | \
+					OMAP_UHH_SYSCONFIG_MIDLEMODE)
+
+#endif /* _OMAP3_EHCI_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/emac_defs.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/emac_defs.h
new file mode 100644
index 000000000..0f4b93499
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/emac_defs.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ */
+
+#ifndef _AM3517_EMAC_H_
+#define _AM3517_EMAC_H_
+
+#define EMAC_BASE_ADDR                 0x5C010000
+#define EMAC_WRAPPER_BASE_ADDR         0x5C000000
+#define EMAC_WRAPPER_RAM_ADDR          0x5C020000
+#define EMAC_MDIO_BASE_ADDR            0x5C030000
+#define EMAC_HW_RAM_ADDR               0x01E20000
+
+#define EMAC_MDIO_BUS_FREQ             166000000       /* 166 MHZ check */
+#define EMAC_MDIO_CLOCK_FREQ           1000000         /* 2.0 MHz */
+
+/* SOFTRESET macro definition interferes with emac_regs structure definition */
+#undef SOFTRESET
+
+typedef volatile unsigned int	dv_reg;
+typedef volatile unsigned int	*dv_reg_p;
+
+#define DAVINCI_EMAC_VERSION2
+
+#endif  /* _AM3517_EMAC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/emif4.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/emif4.h
new file mode 100644
index 000000000..bac43b231
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/emif4.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Auther:
+ *       Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Copyright (C) 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#ifndef _EMIF_H_
+#define _EMIF_H_
+
+/*
+ * Configuration values
+ */
+#define EMIF4_TIM1_T_RP		(0x3 << 25)
+#define EMIF4_TIM1_T_RCD	(0x3 << 21)
+#define EMIF4_TIM1_T_WR		(0x3 << 17)
+#define EMIF4_TIM1_T_RAS	(0x8 << 12)
+#define EMIF4_TIM1_T_RC		(0xA << 6)
+#define EMIF4_TIM1_T_RRD	(0x2 << 3)
+#define EMIF4_TIM1_T_WTR	(0x2)
+
+#define EMIF4_TIM2_T_XP		(0x2 << 28)
+#define EMIF4_TIM2_T_ODT	(0x0 << 25)
+#define EMIF4_TIM2_T_XSNR	(0x1C << 16)
+#define EMIF4_TIM2_T_XSRD	(0xC8 << 6)
+#define EMIF4_TIM2_T_RTP	(0x1 << 3)
+#define EMIF4_TIM2_T_CKE	(0x2)
+
+#define EMIF4_TIM3_T_RFC	(0x25 << 4)
+#define EMIF4_TIM3_T_RAS_MAX	(0x7)
+
+#define EMIF4_PWR_IDLE_MODE	(0x2 << 30)
+#define EMIF4_PWR_DPD_DIS	(0x0 << 10)
+#define EMIF4_PWR_DPD_EN	(0x1 << 10)
+#define EMIF4_PWR_LP_MODE	(0x0 << 8)
+#define EMIF4_PWR_PM_TIM	(0x0)
+
+#define EMIF4_INITREF_DIS	(0x0 << 31)
+#define EMIF4_REFRESH_RATE	(0x50F)
+
+#define EMIF4_CFG_SDRAM_TYP	(0x2 << 29)
+#define EMIF4_CFG_IBANK_POS	(0x0 << 27)
+#define EMIF4_CFG_DDR_TERM	(0x0 << 24)
+#define EMIF4_CFG_DDR2_DDQS	(0x1 << 23)
+#define EMIF4_CFG_DDR_DIS_DLL	(0x0 << 20)
+#define EMIF4_CFG_SDR_DRV	(0x0 << 18)
+#define EMIF4_CFG_NARROW_MD	(0x0 << 14)
+#define EMIF4_CFG_CL		(0x5 << 10)
+#define EMIF4_CFG_ROWSIZE	(0x0 << 7)
+#define EMIF4_CFG_IBANK		(0x3 << 4)
+#define EMIF4_CFG_EBANK		(0x0 << 3)
+#define EMIF4_CFG_PGSIZE	(0x2)
+
+/*
+ * EMIF4 PHY Control 1 register configuration
+ */
+#define EMIF4_DDR1_EXT_STRB_EN	(0x1 << 7)
+#define EMIF4_DDR1_EXT_STRB_DIS	(0x0 << 7)
+#define EMIF4_DDR1_PWRDN_DIS	(0x0 << 6)
+#define EMIF4_DDR1_PWRDN_EN	(0x1 << 6)
+#define EMIF4_DDR1_READ_LAT	(0x6 << 0)
+
+#endif /* endif _EMIF_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/gpio.h
new file mode 100644
index 000000000..ee092f929
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/gpio.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This work is derived from the linux 2.6.27 kernel source
+ * To fetch, use the kernel repository
+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ * Use the v2.6.27 tag.
+ *
+ * Below is the original's header including its copyright
+ *
+ *  linux/arch/arm/plat-omap/gpio.c
+ *
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+#ifndef _GPIO_OMAP3_H
+#define _GPIO_OMAP3_H
+
+#include <asm/omap_gpio.h>
+
+#define OMAP_MAX_GPIO			192
+
+#define OMAP34XX_GPIO1_BASE		0x48310000
+#define OMAP34XX_GPIO2_BASE		0x49050000
+#define OMAP34XX_GPIO3_BASE		0x49052000
+#define OMAP34XX_GPIO4_BASE		0x49054000
+#define OMAP34XX_GPIO5_BASE		0x49056000
+#define OMAP34XX_GPIO6_BASE		0x49058000
+
+#endif /* _GPIO_OMAP3_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/i2c.h
new file mode 100644
index 000000000..b04c01265
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/i2c.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef _OMAP3_I2C_H_
+#define _OMAP3_I2C_H_
+
+#define I2C_DEFAULT_BASE	I2C_BASE1
+
+#endif /* _OMAP3_I2C_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/mem.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/mem.h
new file mode 100644
index 000000000..7adc134a7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/mem.h
@@ -0,0 +1,488 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ */
+
+#ifndef _MEM_H_
+#define _MEM_H_
+
+#define CS0		0x0
+#define CS1		0x1 /* mirror CS1 regs appear offset 0x30 from CS0 */
+
+#ifndef __ASSEMBLY__
+enum {
+	STACKED = 0,
+	IP_DDR = 1,
+	COMBO_DDR = 2,
+	IP_SDR = 3,
+};
+#endif /* __ASSEMBLY__ */
+
+#define EARLY_INIT	1
+
+/*
+ * For a full explanation of these registers and values please see
+ * the Technical Reference Manual (TRM) for any of the processors in
+ * this family.
+ */
+
+/* Slower full frequency range default timings for x32 operation*/
+#define SDRC_SHARING	0x00000100
+#define SDRC_MR_0_SDR	0x00000031
+
+/*
+ * SDRC autorefresh control values.  This register consists of autorefresh
+ * enable at bits 0:1 and an autorefresh counter value in bits 8:23.  The
+ * counter is a result of ( tREFI / tCK ) - 50.
+ */
+#define SDP_3430_SDRC_RFR_CTRL_100MHz	0x0002da01
+#define SDP_3430_SDRC_RFR_CTRL_133MHz	0x0003de01 /* 7.8us/7.5ns - 50=0x3de */
+#define SDP_3430_SDRC_RFR_CTRL_165MHz	0x0004e201 /* 7.8us/6ns - 50=0x4e2 */
+#define SDP_3430_SDRC_RFR_CTRL_200MHz	0x0005e601 /* 7.8us/5ns - 50=0x5e6 */
+
+#define DLL_OFFSET		0
+#define DLL_WRITEDDRCLKX2DIS	1
+#define DLL_ENADLL		1
+#define DLL_LOCKDLL		0
+#define DLL_DLLPHASE_72		0
+#define DLL_DLLPHASE_90		1
+
+/* rkw - need to find of 90/72 degree recommendation for speed like before */
+#define SDP_SDRC_DLLAB_CTRL	((DLL_ENADLL << 3) | \
+				(DLL_LOCKDLL << 2) | (DLL_DLLPHASE_90 << 1))
+
+/* Helper macros to arrive at value of the SDRC_ACTIM_CTRLA register. */
+#define ACTIM_CTRLA_TRFC(v)	(((v) & 0x1F) << 27)	/* 31:27 */
+#define ACTIM_CTRLA_TRC(v)	(((v) & 0x1F) << 22)	/* 26:22 */
+#define ACTIM_CTRLA_TRAS(v)	(((v) & 0x0F) << 18)	/* 21:18 */
+#define ACTIM_CTRLA_TRP(v)	(((v) & 0x07) << 15)	/* 17:15 */
+#define ACTIM_CTRLA_TRCD(v)	(((v) & 0x07) << 12)	/* 14:12 */
+#define ACTIM_CTRLA_TRRD(v)	(((v) & 0x07) << 9)	/* 11:9  */
+#define ACTIM_CTRLA_TDPL(v)	(((v) & 0x07) << 6)	/*  8:6  */
+#define ACTIM_CTRLA_TDAL(v)	(v & 0x1F)		/*  4:0  */
+
+#define ACTIM_CTRLA(trfc, trc, tras, trp, trcd, trrd, tdpl, tdal)	\
+		ACTIM_CTRLA_TRFC(trfc)	|	\
+		ACTIM_CTRLA_TRC(trc)	|	\
+		ACTIM_CTRLA_TRAS(tras)	|	\
+		ACTIM_CTRLA_TRP(trp)	|	\
+		ACTIM_CTRLA_TRCD(trcd)	|	\
+		ACTIM_CTRLA_TRRD(trrd)	|	\
+		ACTIM_CTRLA_TDPL(tdpl)	|	\
+		ACTIM_CTRLA_TDAL(tdal)
+
+/* Helper macros to arrive at value of the SDRC_ACTIM_CTRLB register. */
+#define ACTIM_CTRLB_TWTR(v)	(((v) & 0x03) << 16)	/* 17:16 */
+#define ACTIM_CTRLB_TCKE(v)	(((v) & 0x07) << 12)	/* 14:12 */
+#define ACTIM_CTRLB_TXP(v)	(((v) & 0x07) << 8)	/* 10:8  */
+#define ACTIM_CTRLB_TXSR(v)	(v & 0xFF)		/*  7:0  */
+
+#define ACTIM_CTRLB(twtr, tcke, txp, txsr)		\
+		ACTIM_CTRLB_TWTR(twtr)	|	\
+		ACTIM_CTRLB_TCKE(tcke)	|	\
+		ACTIM_CTRLB_TXP(txp)	|	\
+		ACTIM_CTRLB_TXSR(txsr)
+
+/*
+ * Values used in the MCFG register.  Only values we use today
+ * are defined and the rest can be found in the TRM.  Unless otherwise
+ * noted all fields are one bit.
+ */
+#define V_MCFG_RAMTYPE_DDR		(0x1)
+#define V_MCFG_DEEPPD_EN		(0x1 << 3)
+#define V_MCFG_B32NOT16_32		(0x1 << 4)
+#define V_MCFG_BANKALLOCATION_RBC	(0x2 << 6)		/* 6:7 */
+#define V_MCFG_RAMSIZE(ramsize)		((((ramsize) >> 20)/2) << 8) /* 8:17 */
+#define V_MCFG_ADDRMUXLEGACY_FLEX	(0x1 << 19)
+#define V_MCFG_CASWIDTH(caswidth)	(((caswidth)-5) << 20)	/* 20:22 */
+#define V_MCFG_CASWIDTH_10B		V_MCFG_CASWIDTH(10)
+#define V_MCFG_RASWIDTH(raswidth)	(((raswidth)-11) << 24)	/* 24:26 */
+
+/* Macro to construct MCFG */
+#define MCFG(ramsize, raswidth)						\
+		V_MCFG_RASWIDTH(raswidth) | V_MCFG_CASWIDTH_10B |	\
+		V_MCFG_ADDRMUXLEGACY_FLEX | V_MCFG_RAMSIZE(ramsize) |	\
+		V_MCFG_BANKALLOCATION_RBC | V_MCFG_B32NOT16_32 |	\
+		V_MCFG_DEEPPD_EN | V_MCFG_RAMTYPE_DDR
+
+/* Hynix part of Overo (165MHz optimized) 6.06ns */
+#define HYNIX_TDAL_165   6
+#define HYNIX_TDPL_165   3
+#define HYNIX_TRRD_165   2
+#define HYNIX_TRCD_165   3
+#define HYNIX_TRP_165    3
+#define HYNIX_TRAS_165   7
+#define HYNIX_TRC_165   10
+#define HYNIX_TRFC_165  21
+#define HYNIX_V_ACTIMA_165	\
+		ACTIM_CTRLA(HYNIX_TRFC_165, HYNIX_TRC_165,	\
+				HYNIX_TRAS_165, HYNIX_TRP_165,	\
+				HYNIX_TRCD_165, HYNIX_TRRD_165,	\
+				HYNIX_TDPL_165, HYNIX_TDAL_165)
+
+#define HYNIX_TWTR_165   1
+#define HYNIX_TCKE_165   1
+#define HYNIX_TXP_165    2
+#define HYNIX_XSR_165    24
+#define HYNIX_V_ACTIMB_165	\
+		ACTIM_CTRLB(HYNIX_TWTR_165, HYNIX_TCKE_165,	\
+				HYNIX_TXP_165, HYNIX_XSR_165)
+
+#define HYNIX_RASWIDTH_165	13
+#define HYNIX_V_MCFG_165(size)	MCFG((size), HYNIX_RASWIDTH_165)
+
+/* Hynix part of AM/DM37xEVM (200MHz optimized) */
+#define HYNIX_TDAL_200		6
+#define HYNIX_TDPL_200		3
+#define HYNIX_TRRD_200		2
+#define HYNIX_TRCD_200		4
+#define HYNIX_TRP_200		3
+#define HYNIX_TRAS_200		8
+#define HYNIX_TRC_200		11
+#define HYNIX_TRFC_200		18
+#define HYNIX_V_ACTIMA_200	\
+		ACTIM_CTRLA(HYNIX_TRFC_200, HYNIX_TRC_200,	\
+				HYNIX_TRAS_200, HYNIX_TRP_200,	\
+				HYNIX_TRCD_200, HYNIX_TRRD_200,	\
+				HYNIX_TDPL_200, HYNIX_TDAL_200)
+
+#define HYNIX_TWTR_200		2
+#define HYNIX_TCKE_200		1
+#define HYNIX_TXP_200		1
+#define HYNIX_XSR_200		28
+#define HYNIX_V_ACTIMB_200	\
+		ACTIM_CTRLB(HYNIX_TWTR_200, HYNIX_TCKE_200,	\
+				HYNIX_TXP_200, HYNIX_XSR_200)
+
+#define HYNIX_RASWIDTH_200	14
+#define HYNIX_V_MCFG_200(size)	MCFG((size), HYNIX_RASWIDTH_200)
+
+/* Infineon part of 3430SDP (165MHz optimized) 6.06ns */
+#define INFINEON_TDAL_165	6	/* Twr/Tck + Trp/tck		*/
+					/* 15/6 + 18/6 = 5.5 -> 6	*/
+#define INFINEON_TDPL_165	3	/* 15/6 = 2.5 -> 3 (Twr)	*/
+#define INFINEON_TRRD_165	2	/* 12/6 = 2			*/
+#define INFINEON_TRCD_165	3	/* 18/6 = 3			*/
+#define INFINEON_TRP_165	3	/* 18/6 = 3			*/
+#define INFINEON_TRAS_165	7	/* 42/6 = 7			*/
+#define INFINEON_TRC_165	10	/* 60/6 = 10			*/
+#define INFINEON_TRFC_165	12	/* 72/6 = 12			*/
+
+#define INFINEON_V_ACTIMA_165	\
+		ACTIM_CTRLA(INFINEON_TRFC_165, INFINEON_TRC_165,	\
+				INFINEON_TRAS_165, INFINEON_TRP_165,	\
+				INFINEON_TRCD_165, INFINEON_TRRD_165,	\
+				INFINEON_TDPL_165, INFINEON_TDAL_165)
+
+#define INFINEON_TWTR_165	1
+#define INFINEON_TCKE_165	2
+#define INFINEON_TXP_165	2
+#define INFINEON_XSR_165	20	/* 120/6 = 20	*/
+
+#define INFINEON_V_ACTIMB_165	\
+		ACTIM_CTRLB(INFINEON_TWTR_165, INFINEON_TCKE_165,	\
+				INFINEON_TXP_165, INFINEON_XSR_165)
+
+/* Micron part of 3430 EVM (165MHz optimized) 6.06ns */
+#define MICRON_TDAL_165		6	/* Twr/Tck + Trp/tck		*/
+					/* 15/6 + 18/6 = 5.5 -> 6	*/
+#define MICRON_TDPL_165		3	/* 15/6 = 2.5 -> 3 (Twr)	*/
+#define MICRON_TRRD_165		2	/* 12/6 = 2			*/
+#define MICRON_TRCD_165		3	/* 18/6 = 3			*/
+#define MICRON_TRP_165		3	/* 18/6 = 3			*/
+#define MICRON_TRAS_165		7	/* 42/6 = 7			*/
+#define MICRON_TRC_165		10	/* 60/6 = 10			*/
+#define MICRON_TRFC_165		21	/* 125/6 = 21			*/
+
+#define MICRON_V_ACTIMA_165	\
+		ACTIM_CTRLA(MICRON_TRFC_165, MICRON_TRC_165,		\
+				MICRON_TRAS_165, MICRON_TRP_165,	\
+				MICRON_TRCD_165, MICRON_TRRD_165,	\
+				MICRON_TDPL_165, MICRON_TDAL_165)
+
+#define MICRON_TWTR_165		1
+#define MICRON_TCKE_165		1
+#define MICRON_XSR_165		23	/* 138/6 = 23		*/
+#define MICRON_TXP_165		5	/* 25/6 = 4.1 => ~5	*/
+
+#define MICRON_V_ACTIMB_165	\
+		ACTIM_CTRLB(MICRON_TWTR_165, MICRON_TCKE_165,	\
+				MICRON_TXP_165,	MICRON_XSR_165)
+
+#define MICRON_RASWIDTH_165	13
+#define MICRON_V_MCFG_165(size)	MCFG((size), MICRON_RASWIDTH_165)
+
+#define MICRON_BL_165			0x2
+#define MICRON_SIL_165			0x0
+#define MICRON_CASL_165			0x3
+#define MICRON_WBST_165			0x0
+#define MICRON_V_MR_165			((MICRON_WBST_165 << 9) | \
+		(MICRON_CASL_165 << 4) | (MICRON_SIL_165 << 3) | \
+		(MICRON_BL_165))
+
+/* Micron part (200MHz optimized) 5 ns */
+#define MICRON_TDAL_200		6
+#define MICRON_TDPL_200		3
+#define MICRON_TRRD_200		2
+#define MICRON_TRCD_200		3
+#define MICRON_TRP_200		3
+#define MICRON_TRAS_200		8
+#define MICRON_TRC_200		11
+#define MICRON_TRFC_200		15
+#define MICRON_V_ACTIMA_200	\
+		ACTIM_CTRLA(MICRON_TRFC_200, MICRON_TRC_200,		\
+				MICRON_TRAS_200, MICRON_TRP_200,	\
+				MICRON_TRCD_200, MICRON_TRRD_200,	\
+				MICRON_TDPL_200, MICRON_TDAL_200)
+
+#define MICRON_TWTR_200		2
+#define MICRON_TCKE_200		4
+#define MICRON_TXP_200		2
+#define MICRON_XSR_200		23
+#define MICRON_V_ACTIMB_200	\
+		ACTIM_CTRLB(MICRON_TWTR_200, MICRON_TCKE_200,	\
+				MICRON_TXP_200,	MICRON_XSR_200)
+
+#define MICRON_RASWIDTH_200	14
+#define MICRON_V_MCFG_200(size)	MCFG((size), MICRON_RASWIDTH_200)
+
+/* Samsung K4X51163PG - FGC6 (165MHz optimized) 6.06ns - from 2010.90 src */
+#define SAMSUNG_TDAL_165	5
+#define SAMSUNG_TDPL_165	2
+#define SAMSUNG_TRRD_165	2
+#define SAMSUNG_TRCD_165	3
+#define SAMSUNG_TRP_165		3
+#define SAMSUNG_TRAS_165	7
+#define SAMSUNG_TRC_165		10
+#define SAMSUNG_TRFC_165	12
+
+#define SAMSUNG_V_ACTIMA_165	\
+		ACTIM_CTRLA(SAMSUNG_TRFC_165, SAMSUNG_TRC_165,		\
+				SAMSUNG_TRAS_165, SAMSUNG_TRP_165,	\
+				SAMSUNG_TRCD_165, SAMSUNG_TRRD_165,	\
+				SAMSUNG_TDPL_165, SAMSUNG_TDAL_165)
+
+#define SAMSUNG_TWTR_165	1
+#define SAMSUNG_TCKE_165	2
+#define SAMSUNG_XSR_165		20
+#define SAMSUNG_TXP_165		5
+
+#define SAMSUNG_V_ACTIMB_165	\
+		ACTIM_CTRLB(SAMSUNG_TWTR_165, SAMSUNG_TCKE_165,	\
+				SAMSUNG_TXP_165, SAMSUNG_XSR_165)
+
+#define SAMSUNG_RASWIDTH_165	14
+#define SAMSUNG_V_MCFG_165(size) \
+	V_MCFG_RASWIDTH(SAMSUNG_RASWIDTH_165) | V_MCFG_CASWIDTH_10B | \
+	V_MCFG_ADDRMUXLEGACY_FLEX | V_MCFG_RAMSIZE(size) | \
+	V_MCFG_BANKALLOCATION_RBC | V_MCFG_RAMTYPE_DDR
+
+/* TODO: find which register these were taken from */
+
+#define SAMSUNG_BL_165				0x2
+#define SAMSUNG_SIL_165				0x0
+#define SAMSUNG_CASL_165			0x3
+#define SAMSUNG_WBST_165			0x0
+#define SAMSUNG_V_MR_165			((SAMSUNG_WBST_165 << 9) | \
+		(SAMSUNG_CASL_165 << 4) | (SAMSUNG_SIL_165 << 3) | \
+		(SAMSUNG_BL_165))
+
+#define SAMSUNG_SHARING 0x00003700
+
+/* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns */
+#define NUMONYX_TDAL_165	6	/* Twr/Tck + Trp/tck		*/
+					/* 15/6 + 18/6 = 5.5 -> 6	*/
+#define NUMONYX_TDPL_165	3	/* 15/6 = 2.5 -> 3 (Twr)	*/
+#define NUMONYX_TRRD_165	2	/* 12/6 = 2			*/
+#define NUMONYX_TRCD_165	4	/* 22.5/6 = 3.75 -> 4		*/
+#define NUMONYX_TRP_165		3	/* 18/6 = 3			*/
+#define NUMONYX_TRAS_165	7	/* 42/6 = 7			*/
+#define NUMONYX_TRC_165		10	/* 60/6 = 10			*/
+#define NUMONYX_TRFC_165	24	/* 140/6 = 23.3 -> 24		*/
+
+#define NUMONYX_V_ACTIMA_165	\
+		ACTIM_CTRLA(NUMONYX_TRFC_165, NUMONYX_TRC_165,		\
+				NUMONYX_TRAS_165, NUMONYX_TRP_165,	\
+				NUMONYX_TRCD_165, NUMONYX_TRRD_165,	\
+				NUMONYX_TDPL_165, NUMONYX_TDAL_165)
+
+#define NUMONYX_TWTR_165	2
+#define NUMONYX_TCKE_165	2
+#define NUMONYX_TXP_165		3	/* 200/6 =  33.3 -> 34	*/
+#define NUMONYX_XSR_165		34	/* 1.0 + 1.1 = 2.1 -> 3	*/
+
+#define NUMONYX_V_ACTIMB_165	\
+		ACTIM_CTRLB(NUMONYX_TWTR_165, NUMONYX_TCKE_165,	\
+				NUMONYX_TXP_165, NUMONYX_XSR_165)
+
+#define NUMONYX_RASWIDTH_165		15
+#define NUMONYX_V_MCFG_165(size)	MCFG((size), NUMONYX_RASWIDTH_165)
+
+/* NUMONYX part of IGEP v2 (200MHz optimized) 5 ns */
+#define NUMONYX_TDAL_200	6	/* Twr/Tck + Trp/tck		*/
+					/* 15/5 + 15/5 = 3 + 3 -> 6	*/
+#define NUMONYX_TDPL_200	3	/* 15/5 = 3 -> 3 (Twr)	        */
+#define NUMONYX_TRRD_200	2	/* 10/5 = 2			*/
+#define NUMONYX_TRCD_200	4	/* 16.2/5 = 3.24 -> 4		*/
+#define NUMONYX_TRP_200		3	/* 15/5 = 3			*/
+#define NUMONYX_TRAS_200	8	/* 40/5 = 8			*/
+#define NUMONYX_TRC_200		11	/* 55/5 = 11			*/
+#define NUMONYX_TRFC_200        28      /* 140/5 = 28                   */
+
+#define NUMONYX_V_ACTIMA_200	\
+		ACTIM_CTRLA(NUMONYX_TRFC_200, NUMONYX_TRC_200,		\
+				NUMONYX_TRAS_200, NUMONYX_TRP_200,	\
+				NUMONYX_TRCD_200, NUMONYX_TRRD_200,	\
+				NUMONYX_TDPL_200, NUMONYX_TDAL_200)
+
+#define NUMONYX_TWTR_200	2
+#define NUMONYX_TCKE_200	2
+#define NUMONYX_TXP_200		3
+#define NUMONYX_XSR_200		40
+
+#define NUMONYX_V_ACTIMB_200	\
+		ACTIM_CTRLB(NUMONYX_TWTR_200, NUMONYX_TCKE_200,	\
+				NUMONYX_TXP_200, NUMONYX_XSR_200)
+
+#define NUMONYX_RASWIDTH_200		15
+#define NUMONYX_V_MCFG_200(size)	MCFG((size), NUMONYX_RASWIDTH_200)
+
+/*
+ * GPMC settings -
+ * Definitions is as per the following format
+ * #define <PART>_GPMC_CONFIG<x> <value>
+ * Where:
+ * PART is the part name e.g. STNOR - Intel Strata Flash
+ * x is GPMC config registers from 1 to 6 (there will be 6 macros)
+ * Value is corresponding value
+ *
+ * For every valid PRCM configuration there should be only one definition of
+ * the same. if values are independent of the board, this definition will be
+ * present in this file if values are dependent on the board, then this should
+ * go into corresponding mem-boardName.h file
+ *
+ * Currently valid part Names are (PART):
+ * STNOR - Intel Strata Flash
+ * SMNAND - Samsung NAND
+ * MPDB - H4 MPDB board
+ * SBNOR - Sibley NOR
+ * MNAND - Micron Large page x16 NAND
+ * ONNAND - Samsung One NAND
+ *
+ * include/configs/file.h contains the defn - for all CS we are interested
+ * #define OMAP34XX_GPMC_CSx PART
+ * #define OMAP34XX_GPMC_CSx_SIZE Size
+ * #define OMAP34XX_GPMC_CSx_MAP Map
+ * Where:
+ * x - CS number
+ * PART - Part Name as defined above
+ * SIZE - how big is the mapping to be
+ *   GPMC_SIZE_128M - 0x8
+ *   GPMC_SIZE_64M  - 0xC
+ *   GPMC_SIZE_32M  - 0xE
+ *   GPMC_SIZE_16M  - 0xF
+ * MAP  - Map this CS to which address(GPMC address space)- Absolute address
+ *   >>24 before being used.
+ */
+#define GPMC_SIZE_256M	0x0
+#define GPMC_SIZE_128M	0x8
+#define GPMC_SIZE_64M	0xC
+#define GPMC_SIZE_32M	0xE
+#define GPMC_SIZE_16M	0xF
+
+#define GPMC_BASEADDR_MASK	0x3F
+
+#define GPMC_CS_ENABLE		0x1
+
+#define M_NAND_GPMC_CONFIG1	0x00001800
+#define M_NAND_GPMC_CONFIG2	0x00141400
+#define M_NAND_GPMC_CONFIG3	0x00141400
+#define M_NAND_GPMC_CONFIG4	0x0F010F01
+#define M_NAND_GPMC_CONFIG5	0x010C1414
+#define M_NAND_GPMC_CONFIG6	0x1f0f0A80
+#define M_NAND_GPMC_CONFIG7	0x00000C44
+
+#define STNOR_GPMC_CONFIG1	0x3
+#define STNOR_GPMC_CONFIG2	0x00151501
+#define STNOR_GPMC_CONFIG3	0x00060602
+#define STNOR_GPMC_CONFIG4	0x11091109
+#define STNOR_GPMC_CONFIG5	0x01141F1F
+#define STNOR_GPMC_CONFIG6	0x000004c4
+
+#define SIBNOR_GPMC_CONFIG1	0x1200
+#define SIBNOR_GPMC_CONFIG2	0x001f1f00
+#define SIBNOR_GPMC_CONFIG3	0x00080802
+#define SIBNOR_GPMC_CONFIG4	0x1C091C09
+#define SIBNOR_GPMC_CONFIG5	0x01131F1F
+#define SIBNOR_GPMC_CONFIG6	0x1F0F03C2
+
+#define SDPV2_MPDB_GPMC_CONFIG1	0x00611200
+#define SDPV2_MPDB_GPMC_CONFIG2	0x001F1F01
+#define SDPV2_MPDB_GPMC_CONFIG3	0x00080803
+#define SDPV2_MPDB_GPMC_CONFIG4	0x1D091D09
+#define SDPV2_MPDB_GPMC_CONFIG5	0x041D1F1F
+#define SDPV2_MPDB_GPMC_CONFIG6	0x1D0904C4
+
+#define MPDB_GPMC_CONFIG1	0x00011000
+#define MPDB_GPMC_CONFIG2	0x001f1f01
+#define MPDB_GPMC_CONFIG3	0x00080803
+#define MPDB_GPMC_CONFIG4	0x1c0b1c0a
+#define MPDB_GPMC_CONFIG5	0x041f1F1F
+#define MPDB_GPMC_CONFIG6	0x1F0F04C4
+
+#define P2_GPMC_CONFIG1	0x0
+#define P2_GPMC_CONFIG2	0x0
+#define P2_GPMC_CONFIG3	0x0
+#define P2_GPMC_CONFIG4	0x0
+#define P2_GPMC_CONFIG5	0x0
+#define P2_GPMC_CONFIG6	0x0
+
+#define ONENAND_GPMC_CONFIG1	0x00001200
+#define ONENAND_GPMC_CONFIG2	0x000F0F01
+#define ONENAND_GPMC_CONFIG3	0x00030301
+#define ONENAND_GPMC_CONFIG4	0x0F040F04
+#define ONENAND_GPMC_CONFIG5	0x010F1010
+#define ONENAND_GPMC_CONFIG6	0x1F060000
+
+#define NET_GPMC_CONFIG1	0x00001000
+#define NET_GPMC_CONFIG2	0x001e1e01
+#define NET_GPMC_CONFIG3	0x00080300
+#define NET_GPMC_CONFIG4	0x1c091c09
+#define NET_GPMC_CONFIG5	0x04181f1f
+#define NET_GPMC_CONFIG6	0x00000FCF
+#define NET_GPMC_CONFIG7	0x00000f6c
+
+/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1    0x00001000
+#define NET_LAN9221_GPMC_CONFIG2    0x00060700
+#define NET_LAN9221_GPMC_CONFIG3    0x00020201
+#define NET_LAN9221_GPMC_CONFIG4    0x06000700
+#define NET_LAN9221_GPMC_CONFIG5    0x0006090A
+#define NET_LAN9221_GPMC_CONFIG6    0x87030000
+#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
+
+
+/* max number of GPMC Chip Selects */
+#define GPMC_MAX_CS	8
+/* max number of GPMC regs */
+#define GPMC_MAX_REG	7
+
+#define DBG_MPDB	6
+#define DBG_MPDB_BASE		DEBUG_BASE
+
+#ifndef __ASSEMBLY__
+
+/* Function prototypes */
+void mem_init(void);
+
+u32 is_mem_sdr(void);
+u32 mem_ok(u32 cs);
+
+u32 get_sdr_cs_size(u32);
+u32 get_sdr_cs_offset(u32);
+
+#endif	/* __ASSEMBLY__ */
+
+#endif /* endif _MEM_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/mmc_host_def.h
new file mode 100644
index 000000000..39a7cba0f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/mmc_host_def.h
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MMC_HOST_DEF_H
+#define MMC_HOST_DEF_H
+
+#include <asm/omap_mmc.h>
+
+/* T2 Register definitions */
+#define T2_BASE			0x48002000
+
+typedef struct t2 {
+	unsigned char res1[0x274];	/* 0x000 */
+	unsigned int devconf0;		/* 0x274 */
+	unsigned char res2[0x060];	/* 0x278 */
+	unsigned int devconf1;		/* 0x2D8 */
+	unsigned char res3[0x16C];	/* 0x2DC */
+	unsigned int ctl_prog_io1;	/* 0x448 */
+	unsigned char res4[0x0D4];	/* 0x44C */
+	unsigned int pbias_lite;	/* 0x520 */
+} t2_t;
+
+#define MMCSDIO1ADPCLKISEL		(1 << 24)
+#define MMCSDIO2ADPCLKISEL		(1 << 6)
+
+#define EN_MMC1				(1 << 24)
+#define EN_MMC2				(1 << 25)
+#define EN_MMC3				(1 << 30)
+
+#define PBIASLITEPWRDNZ0		(1 << 1)
+#define PBIASSPEEDCTRL0			(1 << 2)
+#define PBIASLITEPWRDNZ1		(1 << 9)
+#define PBIASLITEVMODE1			(1 << 8)
+#define PBIASLITEVMODE0			(1 << 0)
+
+#define CTLPROGIO1SPEEDCTRL		(1 << 20)
+
+/*
+ * OMAP HSMMC register definitions
+ */
+#define OMAP_HSMMC1_BASE	0x4809C000
+#define OMAP_HSMMC2_BASE	0x480B4000
+#define OMAP_HSMMC3_BASE	0x480AD000
+
+
+#endif /* MMC_HOST_DEF_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/musb.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/musb.h
new file mode 100644
index 000000000..cb3f5d89d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/musb.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * Ilya Yanok, <ilya.yanok@gmail.com>
+ */
+
+#ifndef __ASM_ARCH_OMAP3_MUSB_H
+#define __ASM_ARCH_OMAP3_MUSB_H
+void am35x_musb_reset(struct udevice *dev);
+void am35x_musb_phy_power(struct udevice *dev, u8 on);
+void am35x_musb_clear_irq(struct udevice *dev);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/mux.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/mux.h
new file mode 100644
index 000000000..2ed520d4b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/mux.h
@@ -0,0 +1,497 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ */
+#ifndef _MUX_H_
+#define _MUX_H_
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * SB_LOW - Standby mode configuration: Output low-level
+ * SB_HI - Standby mode configuration: Output high-level
+ * SB_HIZ - Standby mode configuration: Output hi-impedence
+ * SB_PD - Standby mode pull-down enabled
+ * SB_PU - Standby mode pull-up enabled
+ * WKEN - Wakeup input enabled
+ * M0   - Mode 0
+ */
+
+#define IEN	(1 << 8)
+
+#define IDIS	(0 << 8)
+#define PTU	(1 << 4)
+#define PTD	(0 << 4)
+#define EN	(1 << 3)
+#define DIS	(0 << 3)
+
+#define SB_LOW (1 << 9)
+#define SB_HI (5 << 9)
+#define SB_HIZ (2 << 9)
+#define SB_PD (1 << 12)
+#define SB_PU (3 << 12)
+#define WKEN (1 << 14)
+
+#define M0	0
+#define M1	1
+#define M2	2
+#define M3	3
+#define M4	4
+#define M5	5
+#define M6	6
+#define M7	7
+
+/*
+ * To get the actual address the offset has to be added
+ * to OMAP34XX_CTRL_BASE
+ */
+
+/*SDRC*/
+#define CONTROL_PADCONF_SDRC_D0		0x0030
+#define CONTROL_PADCONF_SDRC_D1		0x0032
+#define CONTROL_PADCONF_SDRC_D2		0x0034
+#define CONTROL_PADCONF_SDRC_D3		0x0036
+#define CONTROL_PADCONF_SDRC_D4		0x0038
+#define CONTROL_PADCONF_SDRC_D5		0x003A
+#define CONTROL_PADCONF_SDRC_D6		0x003C
+#define CONTROL_PADCONF_SDRC_D7		0x003E
+#define CONTROL_PADCONF_SDRC_D8		0x0040
+#define CONTROL_PADCONF_SDRC_D9		0x0042
+#define CONTROL_PADCONF_SDRC_D10	0x0044
+#define CONTROL_PADCONF_SDRC_D11	0x0046
+#define CONTROL_PADCONF_SDRC_D12	0x0048
+#define CONTROL_PADCONF_SDRC_D13	0x004A
+#define CONTROL_PADCONF_SDRC_D14	0x004C
+#define CONTROL_PADCONF_SDRC_D15	0x004E
+#define CONTROL_PADCONF_SDRC_D16	0x0050
+#define CONTROL_PADCONF_SDRC_D17	0x0052
+#define CONTROL_PADCONF_SDRC_D18	0x0054
+#define CONTROL_PADCONF_SDRC_D19	0x0056
+#define CONTROL_PADCONF_SDRC_D20	0x0058
+#define CONTROL_PADCONF_SDRC_D21	0x005A
+#define CONTROL_PADCONF_SDRC_D22	0x005C
+#define CONTROL_PADCONF_SDRC_D23	0x005E
+#define CONTROL_PADCONF_SDRC_D24	0x0060
+#define CONTROL_PADCONF_SDRC_D25	0x0062
+#define CONTROL_PADCONF_SDRC_D26	0x0064
+#define CONTROL_PADCONF_SDRC_D27	0x0066
+#define CONTROL_PADCONF_SDRC_D28	0x0068
+#define CONTROL_PADCONF_SDRC_D29	0x006A
+#define CONTROL_PADCONF_SDRC_D30	0x006C
+#define CONTROL_PADCONF_SDRC_D31	0x006E
+#define CONTROL_PADCONF_SDRC_CLK	0x0070
+#define CONTROL_PADCONF_SDRC_DQS0	0x0072
+#define CONTROL_PADCONF_SDRC_DQS1	0x0074
+#define CONTROL_PADCONF_SDRC_DQS2	0x0076
+#define CONTROL_PADCONF_SDRC_DQS3	0x0078
+#define CONTROL_PADCONF_SDRC_BA0	0x05A0
+#define CONTROL_PADCONF_SDRC_BA1	0x05A2
+#define CONTROL_PADCONF_SDRC_A0		0x05A4
+#define CONTROL_PADCONF_SDRC_A1		0x05A6
+#define CONTROL_PADCONF_SDRC_A2		0x05A8
+#define CONTROL_PADCONF_SDRC_A3		0x05AA
+#define CONTROL_PADCONF_SDRC_A4		0x05AC
+#define CONTROL_PADCONF_SDRC_A5		0x05AE
+#define CONTROL_PADCONF_SDRC_A6		0x05B0
+#define CONTROL_PADCONF_SDRC_A7		0x05B2
+#define CONTROL_PADCONF_SDRC_A8		0x05B4
+#define CONTROL_PADCONF_SDRC_A9		0x05B6
+#define CONTROL_PADCONF_SDRC_A10	0x05B8
+#define CONTROL_PADCONF_SDRC_A11	0x05BA
+#define CONTROL_PADCONF_SDRC_A12	0x05BC
+#define CONTROL_PADCONF_SDRC_A13	0x05BE
+#define CONTROL_PADCONF_SDRC_A14	0x05C0
+#define CONTROL_PADCONF_SDRC_NCS0	0x05C2
+#define CONTROL_PADCONF_SDRC_NCS1	0x05C4
+#define CONTROL_PADCONF_SDRC_NCLK	0x05C6
+#define CONTROL_PADCONF_SDRC_NRAS	0x05C8
+#define CONTROL_PADCONF_SDRC_NCAS	0x05CA
+#define CONTROL_PADCONF_SDRC_NWE	0x05CC
+#define CONTROL_PADCONF_SDRC_DM0	0x05CE
+#define CONTROL_PADCONF_SDRC_DM1	0x05D0
+#define CONTROL_PADCONF_SDRC_DM2	0x05D2
+#define CONTROL_PADCONF_SDRC_DM3	0x05D4
+/*GPMC*/
+#define CONTROL_PADCONF_GPMC_A1		0x007A
+#define CONTROL_PADCONF_GPMC_A2		0x007C
+#define CONTROL_PADCONF_GPMC_A3		0x007E
+#define CONTROL_PADCONF_GPMC_A4		0x0080
+#define CONTROL_PADCONF_GPMC_A5		0x0082
+#define CONTROL_PADCONF_GPMC_A6		0x0084
+#define CONTROL_PADCONF_GPMC_A7		0x0086
+#define CONTROL_PADCONF_GPMC_A8		0x0088
+#define CONTROL_PADCONF_GPMC_A9		0x008A
+#define CONTROL_PADCONF_GPMC_A10	0x008C
+#define CONTROL_PADCONF_GPMC_A11	0x0264
+#define CONTROL_PADCONF_GPMC_D0		0x008E
+#define CONTROL_PADCONF_GPMC_D1		0x0090
+#define CONTROL_PADCONF_GPMC_D2		0x0092
+#define CONTROL_PADCONF_GPMC_D3		0x0094
+#define CONTROL_PADCONF_GPMC_D4		0x0096
+#define CONTROL_PADCONF_GPMC_D5		0x0098
+#define CONTROL_PADCONF_GPMC_D6		0x009A
+#define CONTROL_PADCONF_GPMC_D7		0x009C
+#define CONTROL_PADCONF_GPMC_D8		0x009E
+#define CONTROL_PADCONF_GPMC_D9		0x00A0
+#define CONTROL_PADCONF_GPMC_D10	0x00A2
+#define CONTROL_PADCONF_GPMC_D11	0x00A4
+#define CONTROL_PADCONF_GPMC_D12	0x00A6
+#define CONTROL_PADCONF_GPMC_D13	0x00A8
+#define CONTROL_PADCONF_GPMC_D14	0x00AA
+#define CONTROL_PADCONF_GPMC_D15	0x00AC
+#define CONTROL_PADCONF_GPMC_NCS0	0x00AE
+#define CONTROL_PADCONF_GPMC_NCS1	0x00B0
+#define CONTROL_PADCONF_GPMC_NCS2	0x00B2
+#define CONTROL_PADCONF_GPMC_NCS3	0x00B4
+#define CONTROL_PADCONF_GPMC_NCS4	0x00B6
+#define CONTROL_PADCONF_GPMC_NCS5	0x00B8
+#define CONTROL_PADCONF_GPMC_NCS6	0x00BA
+#define CONTROL_PADCONF_GPMC_NCS7	0x00BC
+#define CONTROL_PADCONF_GPMC_CLK	0x00BE
+#define CONTROL_PADCONF_GPMC_NADV_ALE	0x00C0
+#define CONTROL_PADCONF_GPMC_NOE	0x00C2
+#define CONTROL_PADCONF_GPMC_NWE	0x00C4
+#define CONTROL_PADCONF_GPMC_NBE0_CLE	0x00C6
+#define CONTROL_PADCONF_GPMC_NBE1	0x00C8
+#define CONTROL_PADCONF_GPMC_NWP	0x00CA
+#define CONTROL_PADCONF_GPMC_WAIT0	0x00CC
+#define CONTROL_PADCONF_GPMC_WAIT1	0x00CE
+#define CONTROL_PADCONF_GPMC_WAIT2	0x00D0
+#define CONTROL_PADCONF_GPMC_WAIT3	0x00D2
+/*DSS*/
+#define CONTROL_PADCONF_DSS_PCLK	0x00D4
+#define CONTROL_PADCONF_DSS_HSYNC	0x00D6
+#define CONTROL_PADCONF_DSS_VSYNC	0x00D8
+#define CONTROL_PADCONF_DSS_ACBIAS	0x00DA
+#define CONTROL_PADCONF_DSS_DATA0	0x00DC
+#define CONTROL_PADCONF_DSS_DATA1	0x00DE
+#define CONTROL_PADCONF_DSS_DATA2	0x00E0
+#define CONTROL_PADCONF_DSS_DATA3	0x00E2
+#define CONTROL_PADCONF_DSS_DATA4	0x00E4
+#define CONTROL_PADCONF_DSS_DATA5	0x00E6
+#define CONTROL_PADCONF_DSS_DATA6	0x00E8
+#define CONTROL_PADCONF_DSS_DATA7	0x00EA
+#define CONTROL_PADCONF_DSS_DATA8	0x00EC
+#define CONTROL_PADCONF_DSS_DATA9	0x00EE
+#define CONTROL_PADCONF_DSS_DATA10	0x00F0
+#define CONTROL_PADCONF_DSS_DATA11	0x00F2
+#define CONTROL_PADCONF_DSS_DATA12	0x00F4
+#define CONTROL_PADCONF_DSS_DATA13	0x00F6
+#define CONTROL_PADCONF_DSS_DATA14	0x00F8
+#define CONTROL_PADCONF_DSS_DATA15	0x00FA
+#define CONTROL_PADCONF_DSS_DATA16	0x00FC
+#define CONTROL_PADCONF_DSS_DATA17	0x00FE
+#define CONTROL_PADCONF_DSS_DATA18	0x0100
+#define CONTROL_PADCONF_DSS_DATA19	0x0102
+#define CONTROL_PADCONF_DSS_DATA20	0x0104
+#define CONTROL_PADCONF_DSS_DATA21	0x0106
+#define CONTROL_PADCONF_DSS_DATA22	0x0108
+#define CONTROL_PADCONF_DSS_DATA23	0x010A
+/*CAMERA*/
+#define CONTROL_PADCONF_CAM_HS		0x010C
+#define CONTROL_PADCONF_CAM_VS		0x010E
+#define CONTROL_PADCONF_CAM_XCLKA	0x0110
+#define CONTROL_PADCONF_CAM_PCLK	0x0112
+#define CONTROL_PADCONF_CAM_FLD		0x0114
+#define CONTROL_PADCONF_CAM_D0		0x0116
+#define CONTROL_PADCONF_CAM_D1		0x0118
+#define CONTROL_PADCONF_CAM_D2		0x011A
+#define CONTROL_PADCONF_CAM_D3		0x011C
+#define CONTROL_PADCONF_CAM_D4		0x011E
+#define CONTROL_PADCONF_CAM_D5		0x0120
+#define CONTROL_PADCONF_CAM_D6		0x0122
+#define CONTROL_PADCONF_CAM_D7		0x0124
+#define CONTROL_PADCONF_CAM_D8		0x0126
+#define CONTROL_PADCONF_CAM_D9		0x0128
+#define CONTROL_PADCONF_CAM_D10		0x012A
+#define CONTROL_PADCONF_CAM_D11		0x012C
+#define CONTROL_PADCONF_CAM_XCLKB	0x012E
+#define CONTROL_PADCONF_CAM_WEN		0x0130
+#define CONTROL_PADCONF_CAM_STROBE	0x0132
+#define CONTROL_PADCONF_CSI2_DX0	0x0134
+#define CONTROL_PADCONF_CSI2_DY0	0x0136
+#define CONTROL_PADCONF_CSI2_DX1	0x0138
+#define CONTROL_PADCONF_CSI2_DY1	0x013A
+/*Audio Interface */
+#define CONTROL_PADCONF_MCBSP2_FSX	0x013C
+#define CONTROL_PADCONF_MCBSP2_CLKX	0x013E
+#define CONTROL_PADCONF_MCBSP2_DR	0x0140
+#define CONTROL_PADCONF_MCBSP2_DX	0x0142
+#define CONTROL_PADCONF_MMC1_CLK	0x0144
+#define CONTROL_PADCONF_MMC1_CMD	0x0146
+#define CONTROL_PADCONF_MMC1_DAT0	0x0148
+#define CONTROL_PADCONF_MMC1_DAT1	0x014A
+#define CONTROL_PADCONF_MMC1_DAT2	0x014C
+#define CONTROL_PADCONF_MMC1_DAT3	0x014E
+#define CONTROL_PADCONF_MMC1_DAT4	0x0150
+#define CONTROL_PADCONF_MMC1_DAT5	0x0152
+#define CONTROL_PADCONF_MMC1_DAT6	0x0154
+#define CONTROL_PADCONF_MMC1_DAT7	0x0156
+/*Wireless LAN */
+#define CONTROL_PADCONF_MMC2_CLK	0x0158
+#define CONTROL_PADCONF_MMC2_CMD	0x015A
+#define CONTROL_PADCONF_MMC2_DAT0	0x015C
+#define CONTROL_PADCONF_MMC2_DAT1	0x015E
+#define CONTROL_PADCONF_MMC2_DAT2	0x0160
+#define CONTROL_PADCONF_MMC2_DAT3	0x0162
+#define CONTROL_PADCONF_MMC2_DAT4	0x0164
+#define CONTROL_PADCONF_MMC2_DAT5	0x0166
+#define CONTROL_PADCONF_MMC2_DAT6	0x0168
+#define CONTROL_PADCONF_MMC2_DAT7	0x016A
+/*Bluetooth*/
+#define CONTROL_PADCONF_MCBSP3_DX	0x016C
+#define CONTROL_PADCONF_MCBSP3_DR	0x016E
+#define CONTROL_PADCONF_MCBSP3_CLKX	0x0170
+#define CONTROL_PADCONF_MCBSP3_FSX	0x0172
+#define CONTROL_PADCONF_UART2_CTS	0x0174
+#define CONTROL_PADCONF_UART2_RTS	0x0176
+#define CONTROL_PADCONF_UART2_TX	0x0178
+#define CONTROL_PADCONF_UART2_RX	0x017A
+/*Modem Interface */
+#define CONTROL_PADCONF_UART1_TX	0x017C
+#define CONTROL_PADCONF_UART1_RTS	0x017E
+#define CONTROL_PADCONF_UART1_CTS	0x0180
+#define CONTROL_PADCONF_UART1_RX	0x0182
+#define CONTROL_PADCONF_MCBSP4_CLKX	0x0184
+#define CONTROL_PADCONF_MCBSP4_DR	0x0186
+#define CONTROL_PADCONF_MCBSP4_DX	0x0188
+#define CONTROL_PADCONF_MCBSP4_FSX	0x018A
+#define CONTROL_PADCONF_MCBSP1_CLKR	0x018C
+#define CONTROL_PADCONF_MCBSP1_FSR	0x018E
+#define CONTROL_PADCONF_MCBSP1_DX	0x0190
+#define CONTROL_PADCONF_MCBSP1_DR	0x0192
+#define CONTROL_PADCONF_MCBSP_CLKS	0x0194
+#define CONTROL_PADCONF_MCBSP1_FSX	0x0196
+#define CONTROL_PADCONF_MCBSP1_CLKX	0x0198
+/*Serial Interface*/
+#define CONTROL_PADCONF_UART3_CTS_RCTX	0x019A
+#define CONTROL_PADCONF_UART3_RTS_SD	0x019C
+#define CONTROL_PADCONF_UART3_RX_IRRX	0x019E
+#define CONTROL_PADCONF_UART3_TX_IRTX	0x01A0
+#define CONTROL_PADCONF_HSUSB0_CLK	0x01A2
+#define CONTROL_PADCONF_HSUSB0_STP	0x01A4
+#define CONTROL_PADCONF_HSUSB0_DIR	0x01A6
+#define CONTROL_PADCONF_HSUSB0_NXT	0x01A8
+#define CONTROL_PADCONF_HSUSB0_DATA0	0x01AA
+#define CONTROL_PADCONF_HSUSB0_DATA1	0x01AC
+#define CONTROL_PADCONF_HSUSB0_DATA2	0x01AE
+#define CONTROL_PADCONF_HSUSB0_DATA3	0x01B0
+#define CONTROL_PADCONF_HSUSB0_DATA4	0x01B2
+#define CONTROL_PADCONF_HSUSB0_DATA5	0x01B4
+#define CONTROL_PADCONF_HSUSB0_DATA6	0x01B6
+#define CONTROL_PADCONF_HSUSB0_DATA7	0x01B8
+#define CONTROL_PADCONF_I2C1_SCL	0x01BA
+#define CONTROL_PADCONF_I2C1_SDA	0x01BC
+#define CONTROL_PADCONF_I2C2_SCL	0x01BE
+#define CONTROL_PADCONF_I2C2_SDA	0x01C0
+#define CONTROL_PADCONF_I2C3_SCL	0x01C2
+#define CONTROL_PADCONF_I2C3_SDA	0x01C4
+#define CONTROL_PADCONF_I2C4_SCL	0x0A00
+#define CONTROL_PADCONF_I2C4_SDA	0x0A02
+#define CONTROL_PADCONF_HDQ_SIO		0x01C6
+#define CONTROL_PADCONF_MCSPI1_CLK	0x01C8
+#define CONTROL_PADCONF_MCSPI1_SIMO	0x01CA
+#define CONTROL_PADCONF_MCSPI1_SOMI	0x01CC
+#define CONTROL_PADCONF_MCSPI1_CS0	0x01CE
+#define CONTROL_PADCONF_MCSPI1_CS1	0x01D0
+#define CONTROL_PADCONF_MCSPI1_CS2	0x01D2
+#define CONTROL_PADCONF_MCSPI1_CS3	0x01D4
+#define CONTROL_PADCONF_MCSPI2_CLK	0x01D6
+#define CONTROL_PADCONF_MCSPI2_SIMO	0x01D8
+#define CONTROL_PADCONF_MCSPI2_SOMI	0x01DA
+#define CONTROL_PADCONF_MCSPI2_CS0	0x01DC
+#define CONTROL_PADCONF_MCSPI2_CS1	0x01DE
+/*Control and debug */
+#define CONTROL_PADCONF_SYS_32K		0x0A04
+#define CONTROL_PADCONF_SYS_CLKREQ	0x0A06
+#define CONTROL_PADCONF_SYS_NIRQ	0x01E0
+#define CONTROL_PADCONF_SYS_BOOT0	0x0A0A
+#define CONTROL_PADCONF_SYS_BOOT1	0x0A0C
+#define CONTROL_PADCONF_SYS_BOOT2	0x0A0E
+#define CONTROL_PADCONF_SYS_BOOT3	0x0A10
+#define CONTROL_PADCONF_SYS_BOOT4	0x0A12
+#define CONTROL_PADCONF_SYS_BOOT5	0x0A14
+#define CONTROL_PADCONF_SYS_BOOT6	0x0A16
+#define CONTROL_PADCONF_SYS_OFF_MODE	0x0A18
+#define CONTROL_PADCONF_SYS_CLKOUT1	0x0A1A
+#define CONTROL_PADCONF_SYS_CLKOUT2	0x01E2
+#define CONTROL_PADCONF_JTAG_NTRST	0x0A1C
+#define CONTROL_PADCONF_JTAG_TCK	0x0A1E
+#define CONTROL_PADCONF_JTAG_TMS	0x0A20
+#define CONTROL_PADCONF_JTAG_TDI	0x0A22
+#define CONTROL_PADCONF_JTAG_EMU0	0x0A24
+#define CONTROL_PADCONF_JTAG_EMU1	0x0A26
+#define CONTROL_PADCONF_ETK_CLK		0x0A28
+#define CONTROL_PADCONF_ETK_CTL		0x0A2A
+#define CONTROL_PADCONF_ETK_D0		0x0A2C
+#define CONTROL_PADCONF_ETK_D1		0x0A2E
+#define CONTROL_PADCONF_ETK_D2		0x0A30
+#define CONTROL_PADCONF_ETK_D3		0x0A32
+#define CONTROL_PADCONF_ETK_D4		0x0A34
+#define CONTROL_PADCONF_ETK_D5		0x0A36
+#define CONTROL_PADCONF_ETK_D6		0x0A38
+#define CONTROL_PADCONF_ETK_D7		0x0A3A
+#define CONTROL_PADCONF_ETK_D8		0x0A3C
+#define CONTROL_PADCONF_ETK_D9		0x0A3E
+#define CONTROL_PADCONF_ETK_D10		0x0A40
+#define CONTROL_PADCONF_ETK_D11		0x0A42
+#define CONTROL_PADCONF_ETK_D12		0x0A44
+#define CONTROL_PADCONF_ETK_D13		0x0A46
+#define CONTROL_PADCONF_ETK_D14		0x0A48
+#define CONTROL_PADCONF_ETK_D15		0x0A4A
+#define CONTROL_PADCONF_ETK_CLK_ES2	0x05D8
+#define CONTROL_PADCONF_ETK_CTL_ES2	0x05DA
+#define CONTROL_PADCONF_ETK_D0_ES2	0x05DC
+#define CONTROL_PADCONF_ETK_D1_ES2	0x05DE
+#define CONTROL_PADCONF_ETK_D2_ES2	0x05E0
+#define CONTROL_PADCONF_ETK_D3_ES2	0x05E2
+#define CONTROL_PADCONF_ETK_D4_ES2	0x05E4
+#define CONTROL_PADCONF_ETK_D5_ES2	0x05E6
+#define CONTROL_PADCONF_ETK_D6_ES2	0x05E8
+#define CONTROL_PADCONF_ETK_D7_ES2	0x05EA
+#define CONTROL_PADCONF_ETK_D8_ES2	0x05EC
+#define CONTROL_PADCONF_ETK_D9_ES2	0x05EE
+#define CONTROL_PADCONF_ETK_D10_ES2	0x05F0
+#define CONTROL_PADCONF_ETK_D11_ES2	0x05F2
+#define CONTROL_PADCONF_ETK_D12_ES2	0x05F4
+#define CONTROL_PADCONF_ETK_D13_ES2	0x05F6
+#define CONTROL_PADCONF_ETK_D14_ES2	0x05F8
+#define CONTROL_PADCONF_ETK_D15_ES2	0x05FA
+#define CONTROL_PADCONF_JTAG_RTCK	0x0A4E
+#define CONTROL_PADCONF_JTAG_TDO	0x0A50
+/*Die to Die */
+#define CONTROL_PADCONF_D2D_MCAD0	0x01E4
+#define CONTROL_PADCONF_D2D_MCAD1	0x01E6
+#define CONTROL_PADCONF_D2D_MCAD2	0x01E8
+#define CONTROL_PADCONF_D2D_MCAD3	0x01EA
+#define CONTROL_PADCONF_D2D_MCAD4	0x01EC
+#define CONTROL_PADCONF_D2D_MCAD5	0x01EE
+#define CONTROL_PADCONF_D2D_MCAD6	0x01F0
+#define CONTROL_PADCONF_D2D_MCAD7	0x01F2
+#define CONTROL_PADCONF_D2D_MCAD8	0x01F4
+#define CONTROL_PADCONF_D2D_MCAD9	0x01F6
+#define CONTROL_PADCONF_D2D_MCAD10	0x01F8
+#define CONTROL_PADCONF_D2D_MCAD11	0x01FA
+#define CONTROL_PADCONF_D2D_MCAD12	0x01FC
+#define CONTROL_PADCONF_D2D_MCAD13	0x01FE
+#define CONTROL_PADCONF_D2D_MCAD14	0x0200
+#define CONTROL_PADCONF_D2D_MCAD15	0x0202
+#define CONTROL_PADCONF_D2D_MCAD16	0x0204
+#define CONTROL_PADCONF_D2D_MCAD17	0x0206
+#define CONTROL_PADCONF_D2D_MCAD18	0x0208
+#define CONTROL_PADCONF_D2D_MCAD19	0x020A
+#define CONTROL_PADCONF_D2D_MCAD20	0x020C
+#define CONTROL_PADCONF_D2D_MCAD21	0x020E
+#define CONTROL_PADCONF_D2D_MCAD22	0x0210
+#define CONTROL_PADCONF_D2D_MCAD23	0x0212
+#define CONTROL_PADCONF_D2D_MCAD24	0x0214
+#define CONTROL_PADCONF_D2D_MCAD25	0x0216
+#define CONTROL_PADCONF_D2D_MCAD26	0x0218
+#define CONTROL_PADCONF_D2D_MCAD27	0x021A
+#define CONTROL_PADCONF_D2D_MCAD28	0x021C
+#define CONTROL_PADCONF_D2D_MCAD29	0x021E
+#define CONTROL_PADCONF_D2D_MCAD30	0x0220
+#define CONTROL_PADCONF_D2D_MCAD31	0x0222
+#define CONTROL_PADCONF_D2D_MCAD32	0x0224
+#define CONTROL_PADCONF_D2D_MCAD33	0x0226
+#define CONTROL_PADCONF_D2D_MCAD34	0x0228
+#define CONTROL_PADCONF_D2D_MCAD35	0x022A
+#define CONTROL_PADCONF_D2D_MCAD36	0x022C
+#define CONTROL_PADCONF_D2D_CLK26MI	0x022E
+#define CONTROL_PADCONF_D2D_NRESPWRON	0x0230
+#define CONTROL_PADCONF_D2D_NRESWARM	0x0232
+#define CONTROL_PADCONF_D2D_ARM9NIRQ	0x0234
+#define CONTROL_PADCONF_D2D_UMA2P6FIQ	0x0236
+#define CONTROL_PADCONF_D2D_SPINT	0x0238
+#define CONTROL_PADCONF_D2D_FRINT	0x023A
+#define CONTROL_PADCONF_D2D_DMAREQ0	0x023C
+#define CONTROL_PADCONF_D2D_DMAREQ1	0x023E
+#define CONTROL_PADCONF_D2D_DMAREQ2	0x0240
+#define CONTROL_PADCONF_D2D_DMAREQ3	0x0242
+#define CONTROL_PADCONF_D2D_N3GTRST	0x0244
+#define CONTROL_PADCONF_D2D_N3GTDI	0x0246
+#define CONTROL_PADCONF_D2D_N3GTDO	0x0248
+#define CONTROL_PADCONF_D2D_N3GTMS	0x024A
+#define CONTROL_PADCONF_D2D_N3GTCK	0x024C
+#define CONTROL_PADCONF_D2D_N3GRTCK	0x024E
+#define CONTROL_PADCONF_D2D_MSTDBY	0x0250
+#define CONTROL_PADCONF_D2D_SWAKEUP	0x0A4C
+#define CONTROL_PADCONF_D2D_IDLEREQ	0x0252
+#define CONTROL_PADCONF_D2D_IDLEACK	0x0254
+#define CONTROL_PADCONF_D2D_MWRITE	0x0256
+#define CONTROL_PADCONF_D2D_SWRITE	0x0258
+#define CONTROL_PADCONF_D2D_MREAD	0x025A
+#define CONTROL_PADCONF_D2D_SREAD	0x025C
+#define CONTROL_PADCONF_D2D_MBUSFLAG	0x025E
+#define CONTROL_PADCONF_D2D_SBUSFLAG	0x0260
+#define CONTROL_PADCONF_SDRC_CKE0	0x0262
+#define CONTROL_PADCONF_SDRC_CKE1	0x0264
+
+/* AM3517 specific mux configuration */
+#define CONTROL_PADCONF_SYS_NRESWARM	0x0A08
+/* CCDC */
+#define CONTROL_PADCONF_CCDC_PCLK	0x01E4
+#define CONTROL_PADCONF_CCDC_FIELD	0x01E6
+#define CONTROL_PADCONF_CCDC_HD		0x01E8
+#define CONTROL_PADCONF_CCDC_VD		0x01EA
+#define CONTROL_PADCONF_CCDC_WEN	0x01EC
+#define CONTROL_PADCONF_CCDC_DATA0	0x01EE
+#define CONTROL_PADCONF_CCDC_DATA1	0x01F0
+#define CONTROL_PADCONF_CCDC_DATA2	0x01F2
+#define CONTROL_PADCONF_CCDC_DATA3	0x01F4
+#define CONTROL_PADCONF_CCDC_DATA4	0x01F6
+#define CONTROL_PADCONF_CCDC_DATA5	0x01F8
+#define CONTROL_PADCONF_CCDC_DATA6	0x01FA
+#define CONTROL_PADCONF_CCDC_DATA7	0x01FC
+/* RMII */
+#define CONTROL_PADCONF_RMII_MDIO_DATA	0x01FE
+#define CONTROL_PADCONF_RMII_MDIO_CLK	0x0200
+#define CONTROL_PADCONF_RMII_RXD0	0x0202
+#define CONTROL_PADCONF_RMII_RXD1	0x0204
+#define CONTROL_PADCONF_RMII_CRS_DV	0x0206
+#define CONTROL_PADCONF_RMII_RXER	0x0208
+#define CONTROL_PADCONF_RMII_TXD0	0x020A
+#define CONTROL_PADCONF_RMII_TXD1	0x020C
+#define CONTROL_PADCONF_RMII_TXEN	0x020E
+#define CONTROL_PADCONF_RMII_50MHZ_CLK	0x0210
+#define CONTROL_PADCONF_USB0_DRVBUS	0x0212
+/* CAN */
+#define CONTROL_PADCONF_HECC1_TXD	0x0214
+#define CONTROL_PADCONF_HECC1_RXD	0x0216
+
+#define CONTROL_PADCONF_SYS_BOOT7	0x0218
+#define CONTROL_PADCONF_SDRC_DQS0N	0x021A
+#define CONTROL_PADCONF_SDRC_DQS1N	0x021C
+#define CONTROL_PADCONF_SDRC_DQS2N	0x021E
+#define CONTROL_PADCONF_SDRC_DQS3N	0x0220
+#define CONTROL_PADCONF_STRBEN_DLY0	0x0222
+#define CONTROL_PADCONF_STRBEN_DLY1	0x0224
+#define CONTROL_PADCONF_SYS_BOOT8	0x0226
+
+/* AM/DM37xx specific */
+#define CONTROL_PADCONF_GPIO112		0x0134
+#define CONTROL_PADCONF_GPIO113		0x0136
+#define CONTROL_PADCONF_GPIO114		0x0138
+#define CONTROL_PADCONF_GPIO115		0x013A
+#define CONTROL_PADCONF_GPIO127		0x0A54
+#define CONTROL_PADCONF_GPIO126		0x0A56
+#define CONTROL_PADCONF_GPIO128		0x0A58
+#define CONTROL_PADCONF_GPIO129		0x0A5A
+
+/* AM/DM37xx specific: gpio_127, gpio_127 and gpio_129 require configuration
+ * of the extended drain cells */
+#define OMAP34XX_CTRL_WKUP_CTRL		(OMAP34XX_CTRL_BASE + 0x0A5C)
+#define OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ	(1<<6)
+
+#define MUX_VAL(OFFSET, VALUE)\
+	writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
+
+#define	CP(x)	(CONTROL_PADCONF_##x)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/omap.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/omap.h
new file mode 100644
index 000000000..19155a280
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/omap.h
@@ -0,0 +1,284 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ */
+
+#ifndef _OMAP3_H_
+#define _OMAP3_H_
+
+#include <linux/sizes.h>
+
+/* Stuff on L3 Interconnect */
+#define SMX_APE_BASE			0x68000000
+
+/* GPMC */
+#define OMAP34XX_GPMC_BASE		0x6E000000
+
+/* SMS */
+#define OMAP34XX_SMS_BASE		0x6C000000
+
+/* SDRC */
+#define OMAP34XX_SDRC_BASE		0x6D000000
+
+/*
+ * L4 Peripherals - L4 Wakeup and L4 Core now
+ */
+#define OMAP34XX_CORE_L4_IO_BASE	0x48000000
+#define OMAP34XX_WAKEUP_L4_IO_BASE	0x48300000
+#define OMAP34XX_ID_L4_IO_BASE		0x4830A200
+#define OMAP34XX_L4_PER			0x49000000
+#define OMAP34XX_L4_IO_BASE		OMAP34XX_CORE_L4_IO_BASE
+
+/* DMA4/SDMA */
+#define OMAP34XX_DMA4_BASE              0x48056000
+
+/* CONTROL */
+#define OMAP34XX_CTRL_BASE		(OMAP34XX_L4_IO_BASE + 0x2000)
+
+#ifndef __ASSEMBLY__
+/* Signal Integrity Parameter Control Registers */
+struct control_prog_io {
+	unsigned char res[0x408];
+	unsigned int io2;		/* 0x408 */
+	unsigned char res2[0x38];
+	unsigned int io0;		/* 0x444 */
+	unsigned int io1;		/* 0x448 */
+};
+#endif /* __ASSEMBLY__ */
+
+/* Bit definition for CONTROL_PROG_IO1 */
+#define PRG_I2C2_PULLUPRESX		0x00000001
+
+/* Scratchpad memory */
+#define OMAP34XX_SCRATCHPAD		(OMAP34XX_CTRL_BASE + 0x910)
+
+/* UART */
+#define OMAP34XX_UART1			(OMAP34XX_L4_IO_BASE + 0x6a000)
+#define OMAP34XX_UART2			(OMAP34XX_L4_IO_BASE + 0x6c000)
+#define OMAP34XX_UART3			(OMAP34XX_L4_PER + 0x20000)
+#define OMAP34XX_UART4			(OMAP34XX_L4_PER + 0x42000)
+
+/* General Purpose Timers */
+#define OMAP34XX_GPT1			0x48318000
+#define OMAP34XX_GPT2			0x49032000
+#define OMAP34XX_GPT3			0x49034000
+#define OMAP34XX_GPT4			0x49036000
+#define OMAP34XX_GPT5			0x49038000
+#define OMAP34XX_GPT6			0x4903A000
+#define OMAP34XX_GPT7			0x4903C000
+#define OMAP34XX_GPT8			0x4903E000
+#define OMAP34XX_GPT9			0x49040000
+#define OMAP34XX_GPT10			0x48086000
+#define OMAP34XX_GPT11			0x48088000
+#define OMAP34XX_GPT12			0x48304000
+
+/* WatchDog Timers (1 secure, 3 GP) */
+#define WD1_BASE			0x4830C000
+#define WD2_BASE			0x48314000
+#define WD3_BASE			0x49030000
+
+/* 32KTIMER */
+#define SYNC_32KTIMER_BASE		0x48320000
+
+#ifndef __ASSEMBLY__
+
+struct s32ktimer {
+	unsigned char res[0x10];
+	unsigned int s32k_cr;		/* 0x10 */
+};
+
+#define DEVICE_TYPE_SHIFT		0x8
+#define DEVICE_TYPE_MASK		(0x7 << DEVICE_TYPE_SHIFT)
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+struct gpio {
+	unsigned char res1[0x34];
+	unsigned int oe;		/* 0x34 */
+	unsigned int datain;		/* 0x38 */
+	unsigned char res2[0x54];
+	unsigned int cleardataout;	/* 0x90 */
+	unsigned int setdataout;	/* 0x94 */
+};
+#endif /* __ASSEMBLY__ */
+
+#define GPIO0				(0x1 << 0)
+#define GPIO1				(0x1 << 1)
+#define GPIO2				(0x1 << 2)
+#define GPIO3				(0x1 << 3)
+#define GPIO4				(0x1 << 4)
+#define GPIO5				(0x1 << 5)
+#define GPIO6				(0x1 << 6)
+#define GPIO7				(0x1 << 7)
+#define GPIO8				(0x1 << 8)
+#define GPIO9				(0x1 << 9)
+#define GPIO10				(0x1 << 10)
+#define GPIO11				(0x1 << 11)
+#define GPIO12				(0x1 << 12)
+#define GPIO13				(0x1 << 13)
+#define GPIO14				(0x1 << 14)
+#define GPIO15				(0x1 << 15)
+#define GPIO16				(0x1 << 16)
+#define GPIO17				(0x1 << 17)
+#define GPIO18				(0x1 << 18)
+#define GPIO19				(0x1 << 19)
+#define GPIO20				(0x1 << 20)
+#define GPIO21				(0x1 << 21)
+#define GPIO22				(0x1 << 22)
+#define GPIO23				(0x1 << 23)
+#define GPIO24				(0x1 << 24)
+#define GPIO25				(0x1 << 25)
+#define GPIO26				(0x1 << 26)
+#define GPIO27				(0x1 << 27)
+#define GPIO28				(0x1 << 28)
+#define GPIO29				(0x1 << 29)
+#define GPIO30				(0x1 << 30)
+#define GPIO31				(0x1 << 31)
+
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_OFFSET0			0x40000000
+#define SRAM_OFFSET1			0x00200000
+#define SRAM_OFFSET2			0x0000F800
+#define SRAM_VECT_CODE			(SRAM_OFFSET0 | SRAM_OFFSET1 | \
+					 SRAM_OFFSET2)
+#define SRAM_CLK_CODE			(SRAM_VECT_CODE + 64)
+
+#define NON_SECURE_SRAM_START		0x40208000 /* Works for GP & EMU */
+#define NON_SECURE_SRAM_END		0x40210000
+#define NON_SECURE_SRAM_IMG_END		0x4020F000
+#define SRAM_SCRATCH_SPACE_ADDR		(NON_SECURE_SRAM_IMG_END - SZ_1K)
+
+#define LOW_LEVEL_SRAM_STACK		0x4020FFFC
+
+/* scratch area - accessible on both EMU and GP */
+#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA	NON_SECURE_SRAM_START
+
+#define DEBUG_LED1			149	/* gpio */
+#define DEBUG_LED2			150	/* gpio */
+
+#define XDR_POP		5	/* package on package part */
+#define SDR_DISCRETE	4	/* 128M memory SDR module */
+#define DDR_STACKED	3	/* stacked part on 2422 */
+#define DDR_COMBO	2	/* combo part on cpu daughter card */
+#define DDR_DISCRETE	1	/* 2x16 parts on daughter card */
+
+#define DDR_100		100	/* type found on most mem d-boards */
+#define DDR_111		111	/* some combo parts */
+#define DDR_133		133	/* most combo, some mem d-boards */
+#define DDR_165		165	/* future parts */
+
+#define CPU_3430	0x3430
+
+/*
+ * 343x real hardware:
+ *  ES1     = rev 0
+ *
+ *  ES2 onwards, the value maps to contents of IDCODE register [31:28].
+ *
+ * Note : CPU_3XX_ES20 is used in cache.S.  Please review before changing.
+ */
+#define CPU_3XX_ES10		0
+#define CPU_3XX_ES20		1
+#define CPU_3XX_ES21		2
+#define CPU_3XX_ES30		3
+#define CPU_3XX_ES31		4
+#define CPU_3XX_ES312		7
+#define CPU_3XX_MAX_REV		8
+
+/*
+ * 37xx real hardware:
+ * ES1.0 onwards, the value maps to contents of IDCODE register [31:28].
+ */
+
+#define CPU_37XX_ES10		0
+#define CPU_37XX_ES11		1
+#define CPU_37XX_ES12		2
+#define CPU_37XX_MAX_REV	3
+
+#define CPU_3XX_ID_SHIFT	28
+
+#define WIDTH_8BIT		0x0000
+#define WIDTH_16BIT		0x1000	/* bit pos for 16 bit in gpmc */
+
+/*
+ * Hawkeye values
+ */
+#define HAWKEYE_OMAP34XX	0xb7ae
+#define HAWKEYE_AM35XX		0xb868
+#define HAWKEYE_OMAP36XX	0xb891
+
+#define HAWKEYE_SHIFT		12
+
+/*
+ * Define CPU families
+ */
+#define CPU_OMAP34XX		0x3400	/* OMAP34xx/OMAP35 devices */
+#define CPU_AM35XX		0x3500	/* AM35xx devices          */
+#define CPU_OMAP36XX		0x3600	/* OMAP36xx devices        */
+
+/*
+ * Control status register values corresponding to cpu variants
+ */
+#define OMAP3503		0x5c00
+#define OMAP3515		0x1c00
+#define OMAP3525		0x4c00
+#define OMAP3530		0x0c00
+
+#define AM3505			0x5c00
+#define AM3517			0x1c00
+
+#define OMAP3730		0x0c00
+#define OMAP3725		0x4c00
+#define AM3715			0x1c00
+#define AM3703			0x5c00
+
+#define OMAP3730_1GHZ		0x0e00
+#define OMAP3725_1GHZ		0x4e00
+#define AM3715_1GHZ		0x1e00
+#define AM3703_1GHZ		0x5e00
+
+/*
+ * ROM code API related flags
+ */
+#define OMAP3_GP_ROMCODE_API_L2_INVAL		1
+#define OMAP3_GP_ROMCODE_API_WRITE_L2ACR	2
+#define OMAP3_GP_ROMCODE_API_WRITE_ACR		3
+
+/*
+ * EMU device PPA HAL related flags
+ */
+#define OMAP3_EMU_HAL_API_L2_INVAL		40
+#define OMAP3_EMU_HAL_API_WRITE_ACR		42
+
+#define OMAP3_EMU_HAL_START_HAL_CRITICAL	4
+
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		30
+#define OMAP_ABB_CLOCK_CYCLES		8
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK	(0x1 << 26)
+
+#define OMAP_REBOOT_REASON_OFFSET	0x04
+
+/* Boot parameters */
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+	unsigned int boot_message;
+	unsigned char boot_device;
+	unsigned char reserved;
+	unsigned char reset_reason;
+	unsigned char ch_flags;
+	unsigned int boot_device_descriptor;
+};
+
+int omap_reboot_mode(char *mode, unsigned int length);
+int omap_reboot_mode_clear(void);
+int omap_reboot_mode_store(char *mode);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/omap3-regs.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/omap3-regs.h
new file mode 100644
index 000000000..7b3c6c7ab
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/omap3-regs.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (c) 2011 Comelit Group SpA, Luca Ceresoli <luca.ceresoli@comelit.it>
+ */
+
+#ifndef _OMAP3_REGS_H
+#define _OMAP3_REGS_H
+
+/*
+ * Register definitions for OMAP3 processors.
+ */
+
+/*
+ * GPMC_CONFIG1 - GPMC_CONFIG7
+ */
+
+/* Values for GPMC_CONFIG1 - signal control parameters */
+#define WRAPBURST                     (1 << 31)
+#define READMULTIPLE                  (1 << 30)
+#define READTYPE                      (1 << 29)
+#define WRITEMULTIPLE                 (1 << 28)
+#define WRITETYPE                     (1 << 27)
+#define CLKACTIVATIONTIME(x)          (((x) & 3) << 25)
+#define ATTACHEDDEVICEPAGELENGTH(x)   (((x) & 3) << 23)
+#define WAITREADMONITORING            (1 << 22)
+#define WAITWRITEMONITORING           (1 << 21)
+#define WAITMONITORINGTIME(x)         (((x) & 3) << 18)
+#define WAITPINSELECT(x)              (((x) & 3) << 16)
+#define DEVICESIZE(x)                 (((x) & 3) << 12)
+#define DEVICESIZE_8BIT               DEVICESIZE(0)
+#define DEVICESIZE_16BIT              DEVICESIZE(1)
+#define DEVICETYPE(x)                 (((x) & 3) << 10)
+#define DEVICETYPE_NOR                DEVICETYPE(0)
+#define DEVICETYPE_NAND               DEVICETYPE(2)
+#define MUXADDDATA                    (1 << 9)
+#define TIMEPARAGRANULARITY           (1 << 4)
+#define GPMCFCLKDIVIDER(x)            (((x) & 3) << 0)
+
+/* Values for GPMC_CONFIG2 - CS timing */
+#define CSWROFFTIME(x)   (((x) & 0x1f) << 16)
+#define CSRDOFFTIME(x)   (((x) & 0x1f) <<  8)
+#define CSEXTRADELAY     (1 << 7)
+#define CSONTIME(x)      (((x) &  0xf) <<  0)
+
+/* Values for GPMC_CONFIG3 - nADV timing */
+#define ADVWROFFTIME(x)  (((x) & 0x1f) << 16)
+#define ADVRDOFFTIME(x)  (((x) & 0x1f) <<  8)
+#define ADVEXTRADELAY    (1 << 7)
+#define ADVONTIME(x)     (((x) &  0xf) <<  0)
+
+/* Values for GPMC_CONFIG4 - nWE and nOE timing */
+#define WEOFFTIME(x)     (((x) & 0x1f) << 24)
+#define WEEXTRADELAY     (1 << 23)
+#define WEONTIME(x)      (((x) &  0xf) << 16)
+#define OEOFFTIME(x)     (((x) & 0x1f) <<  8)
+#define OEEXTRADELAY     (1 << 7)
+#define OEONTIME(x)      (((x) &  0xf) <<  0)
+
+/* Values for GPMC_CONFIG5 - RdAccessTime and CycleTime timing */
+#define PAGEBURSTACCESSTIME(x)  (((x) &  0xf) << 24)
+#define RDACCESSTIME(x)         (((x) & 0x1f) << 16)
+#define WRCYCLETIME(x)          (((x) & 0x1f) <<  8)
+#define RDCYCLETIME(x)          (((x) & 0x1f) <<  0)
+
+/* Values for GPMC_CONFIG6 - misc timings */
+#define WRACCESSTIME(x)        (((x) & 0x1f) << 24)
+#define WRDATAONADMUXBUS(x)    (((x) &  0xf) << 16)
+#define CYCLE2CYCLEDELAY(x)    (((x) &  0xf) <<  8)
+#define CYCLE2CYCLESAMECSEN    (1 << 7)
+#define CYCLE2CYCLEDIFFCSEN    (1 << 6)
+#define BUSTURNAROUND(x)       (((x) &  0xf) <<  0)
+
+/* Values for GPMC_CONFIG7 - CS address mapping configuration */
+#define MASKADDRESS(x)         (((x) &  0xf) <<  8)
+#define CSVALID                (1 << 6)
+#define BASEADDRESS(x)         (((x) & 0x3f) <<  0)
+
+#endif /* _OMAP3_REGS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/spl.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/spl.h
new file mode 100644
index 000000000..86b1f4674
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/spl.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_NONE	0x00
+#define BOOT_DEVICE_XIP		0x01
+#define BOOT_DEVICE_NAND	0x02
+#define BOOT_DEVICE_ONENAND	0x03
+#define BOOT_DEVICE_MMC2	0x05
+#define BOOT_DEVICE_MMC1	0x06
+#define BOOT_DEVICE_XIPWAIT	0x07
+#define BOOT_DEVICE_MMC2_2      0x08
+#define BOOT_DEVICE_UART	0x10
+#define BOOT_DEVICE_USB		0x11
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/sys_proto.h
new file mode 100644
index 000000000..32ac03351
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ */
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+#include <linux/mtd/omap_gpmc.h>
+#include <asm/omap_common.h>
+
+typedef struct {
+	u32 mtype;
+	char *board_string;
+	char *nand_string;
+} omap3_sysinfo;
+
+struct emu_hal_params {
+	u32 num_params;
+	u32 param1;
+};
+
+/* Board SDRC timing values */
+struct board_sdrc_timings {
+	u32 sharing;
+	u32 mcfg;
+	u32 ctrla;
+	u32 ctrlb;
+	u32 rfr_ctrl;
+	u32 mr;
+};
+
+void prcm_init(void);
+void per_clocks_enable(void);
+void ehci_clocks_enable(void);
+
+void memif_init(void);
+void sdrc_init(void);
+void do_sdrc_init(u32, u32);
+
+void get_board_mem_timings(struct board_sdrc_timings *timings);
+int identify_nand_chip(int *mfr, int *id);
+void emif4_init(void);
+void gpmc_init(void);
+void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
+				u32 base, u32 size);
+void set_gpmc_cs0(int flash_type);
+
+void watchdog_init(void);
+void set_muxconf_regs(void);
+
+u32 get_cpu_family(void);
+u32 get_cpu_rev(void);
+u32 get_sku_id(void);
+u32 is_gpmc_muxed(void);
+u32 get_gpmc0_type(void);
+u32 get_gpmc0_width(void);
+u32 is_running_in_sdram(void);
+u32 is_running_in_sram(void);
+u32 is_running_in_flash(void);
+u32 get_device_type(void);
+void secureworld_exit(void);
+void try_unlock_memory(void);
+u32 get_boot_type(void);
+void invalidate_dcache(u32);
+u32 wait_on_value(u32, u32, void *, u32);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdelay(unsigned long);
+void make_cs1_contiguous(void);
+int omap_nand_switch_ecc(uint32_t, uint32_t);
+void power_init_r(void);
+void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
+void omap3_set_aux_cr_secure(u32 acr);
+u32 warm_reset(void);
+
+void save_omap_boot_params(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/clock.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/clock.h
new file mode 100644
index 000000000..0a626fe64
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/clock.h
@@ -0,0 +1,251 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ */
+#ifndef _CLOCKS_OMAP4_H_
+#define _CLOCKS_OMAP4_H_
+#include <asm/omap_common.h>
+
+/*
+ * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
+ * loop, allow for a minimum of 2 ms wait (in reality the wait will be
+ * much more than that)
+ */
+#define LDELAY		1000000
+
+/* CM_DLL_CTRL */
+#define CM_DLL_CTRL_OVERRIDE_SHIFT	0
+#define CM_DLL_CTRL_OVERRIDE_MASK	(1 << 0)
+#define CM_DLL_CTRL_NO_OVERRIDE		0
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT		11
+#define CM_CLKMODE_DPLL_REGM4XEN_MASK		(1 << 11)
+#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT		10
+#define CM_CLKMODE_DPLL_LPMODE_EN_MASK		(1 << 10)
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT	9
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK	(1 << 9)
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT	8
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK	(1 << 8)
+#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT		5
+#define CM_CLKMODE_DPLL_RAMP_RATE_MASK		(0x7 << 5)
+#define CM_CLKMODE_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_EN_MASK			(0x7 << 0)
+
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK		7
+
+#define DPLL_EN_STOP			1
+#define DPLL_EN_MN_BYPASS		4
+#define DPLL_EN_LOW_POWER_BYPASS	5
+#define DPLL_EN_FAST_RELOCK_BYPASS	6
+#define DPLL_EN_LOCK			7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK		1
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT	24
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK		(0xFF << 24)
+#define CM_CLKSEL_DPLL_M_SHIFT			8
+#define CM_CLKSEL_DPLL_M_MASK			(0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT			0
+#define CM_CLKSEL_DPLL_N_MASK			0x7F
+#define CM_CLKSEL_DCC_EN_SHIFT			22
+#define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
+
+/* CM_SYS_CLKSEL */
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK  7
+
+/* CM_CLKSEL_CORE */
+#define CLKSEL_CORE_SHIFT	0
+#define CLKSEL_L3_SHIFT		4
+#define CLKSEL_L4_SHIFT		8
+
+#define CLKSEL_CORE_X2_DIV_1	0
+#define CLKSEL_L3_CORE_DIV_2	1
+#define CLKSEL_L4_L3_DIV_2	1
+
+/* CM_ABE_PLL_REF_CLKSEL */
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK	1
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK	1
+
+/* CM_BYPCLK_DPLL_IVA */
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT		0
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK		3
+
+#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2		1
+
+/* CM_SHADOW_FREQ_CONFIG1 */
+#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK	1
+#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK	4
+#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK	8
+
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT	8
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK	(7 << 8)
+
+#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT	11
+#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK		(0x1F << 11)
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT		0
+#define CD_CLKCTRL_CLKTRCTRL_MASK		3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP		0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP		1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP		2
+#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO		3
+
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT		0
+#define MODULE_CLKCTRL_MODULEMODE_MASK		3
+#define MODULE_CLKCTRL_IDLEST_SHIFT		16
+#define MODULE_CLKCTRL_IDLEST_MASK		(3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE		0
+#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO		1
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN	2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL	0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING	1
+#define MODULE_CLKCTRL_IDLEST_IDLE		2
+#define MODULE_CLKCTRL_IDLEST_DISABLED		3
+
+/* CM_L4PER_GPIO4_CLKCTRL */
+#define GPIO4_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_L3INIT_HSMMCn_CLKCTRL */
+#define HSMMC_CLKCTRL_CLKSEL_MASK		(1 << 24)
+
+/* CM_WKUP_GPTIMER1_CLKCTRL */
+#define GPTIMER1_CLKCTRL_CLKSEL_MASK		(1 << 24)
+
+/* CM_CAM_ISS_CLKCTRL */
+#define ISS_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_DSS_DSS_CLKCTRL */
+#define DSS_CLKCTRL_OPTFCLKEN_MASK		0xF00
+
+/* CM_COREAON_USB_PHY_CORE_CLKCTRL */
+#define USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K	(1 << 8)
+
+/* CM_L3INIT_USBPHY_CLKCTRL */
+#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK	(1 << 8)
+
+/* CM_MPU_MPU_CLKCTRL */
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT	24
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK	(1 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT	25
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK	(1 << 25)
+
+/* Clock frequencies */
+#define OMAP_SYS_CLK_IND_38_4_MHZ	6
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
+
+/* PMIC */
+#define SMPS_I2C_SLAVE_ADDR	0x12
+/* TWL6030 SMPS */
+#define SMPS_REG_ADDR_VCORE1	0x55
+#define SMPS_REG_ADDR_VCORE2	0x5B
+#define SMPS_REG_ADDR_VCORE3	0x61
+/* TWL6032 SMPS */
+#define SMPS_REG_ADDR_SMPS1	0x55
+#define SMPS_REG_ADDR_SMPS2	0x5B
+#define SMPS_REG_ADDR_SMPS5	0x49
+
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV		607700
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV	709000
+
+/* TPS */
+#define TPS62361_I2C_SLAVE_ADDR		0x60
+#define TPS62361_REG_ADDR_SET0		0x0
+#define TPS62361_REG_ADDR_SET1		0x1
+#define TPS62361_REG_ADDR_SET2		0x2
+#define TPS62361_REG_ADDR_SET3		0x3
+#define TPS62361_REG_ADDR_CTRL		0x4
+#define TPS62361_REG_ADDR_TEMP		0x5
+#define TPS62361_REG_ADDR_RMP_CTRL	0x6
+#define TPS62361_REG_ADDR_CHIP_ID	0x8
+#define TPS62361_REG_ADDR_CHIP_ID_2	0x9
+
+#define TPS62361_BASE_VOLT_MV	500
+#define TPS62361_VSEL0_GPIO	7
+
+/* AUXCLKx reg fields */
+#define AUXCLK_ENABLE_MASK		(1 << 8)
+#define AUXCLK_SRCSELECT_SHIFT		1
+#define AUXCLK_SRCSELECT_MASK		(3 << 1)
+#define AUXCLK_CLKDIV_SHIFT		16
+#define AUXCLK_CLKDIV_MASK		(0xF << 16)
+
+#define AUXCLK_SRCSELECT_SYS_CLK	0
+#define AUXCLK_SRCSELECT_CORE_DPLL	1
+#define AUXCLK_SRCSELECT_PER_DPLL	2
+#define AUXCLK_SRCSELECT_ALTERNATE	3
+
+#define AUXCLK_CLKDIV_2			1
+#define AUXCLK_CLKDIV_16		0xF
+
+/* ALTCLKSRC */
+#define ALTCLKSRC_MODE_MASK		3
+#define ALTCLKSRC_ENABLE_INT_MASK	4
+#define ALTCLKSRC_ENABLE_EXT_MASK	8
+
+#define ALTCLKSRC_MODE_ACTIVE		1
+
+#define DPLL_NO_LOCK	0
+#define DPLL_LOCK	1
+
+/* Clock Defines */
+#define V_OSCK			38400000	/* Clock output from T2 */
+#define V_SCLK                   V_OSCK
+
+struct omap4_scrm_regs {
+	u32 revision;           /* 0x0000 */
+	u32 pad00[63];
+	u32 clksetuptime;       /* 0x0100 */
+	u32 pmicsetuptime;      /* 0x0104 */
+	u32 pad01[2];
+	u32 altclksrc;          /* 0x0110 */
+	u32 pad02[2];
+	u32 c2cclkm;            /* 0x011c */
+	u32 pad03[56];
+	u32 extclkreq;          /* 0x0200 */
+	u32 accclkreq;          /* 0x0204 */
+	u32 pwrreq;             /* 0x0208 */
+	u32 pad04[1];
+	u32 auxclkreq0;         /* 0x0210 */
+	u32 auxclkreq1;         /* 0x0214 */
+	u32 auxclkreq2;         /* 0x0218 */
+	u32 auxclkreq3;         /* 0x021c */
+	u32 auxclkreq4;         /* 0x0220 */
+	u32 auxclkreq5;         /* 0x0224 */
+	u32 pad05[3];
+	u32 c2cclkreq;          /* 0x0234 */
+	u32 pad06[54];
+	u32 auxclk0;            /* 0x0310 */
+	u32 auxclk1;            /* 0x0314 */
+	u32 auxclk2;            /* 0x0318 */
+	u32 auxclk3;            /* 0x031c */
+	u32 auxclk4;            /* 0x0320 */
+	u32 auxclk5;            /* 0x0324 */
+	u32 pad07[54];
+	u32 rsttime_reg;        /* 0x0400 */
+	u32 pad08[6];
+	u32 c2crstctrl;         /* 0x041c */
+	u32 extpwronrstctrl;    /* 0x0420 */
+	u32 pad09[59];
+	u32 extwarmrstst_reg;   /* 0x0510 */
+	u32 apewarmrstst_reg;   /* 0x0514 */
+	u32 pad10[1];
+	u32 c2cwarmrstst_reg;   /* 0x051C */
+};
+#endif /* _CLOCKS_OMAP4_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/cpu.h
new file mode 100644
index 000000000..4c9ed4558
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/cpu.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2010
+ * Texas Instruments, <www.ti.com>
+ */
+
+#ifndef _CPU_H
+#define _CPU_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#include <asm/arch/hardware.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct gptimer {
+	u32 tidr;		/* 0x00 r */
+	u8 res[0xc];
+	u32 tiocp_cfg;		/* 0x10 rw */
+	u32 tistat;		/* 0x14 r */
+	u32 tisr;		/* 0x18 rw */
+	u32 tier;		/* 0x1c rw */
+	u32 twer;		/* 0x20 rw */
+	u32 tclr;		/* 0x24 rw */
+	u32 tcrr;		/* 0x28 rw */
+	u32 tldr;		/* 0x2c rw */
+	u32 ttgr;		/* 0x30 rw */
+	u32 twpc;		/* 0x34 r */
+	u32 tmar;		/* 0x38 rw */
+	u32 tcar1;		/* 0x3c r */
+	u32 tcicr;		/* 0x40 rw */
+	u32 tcar2;		/* 0x44 r */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* enable sys_clk NO-prescale /1 */
+#define GPT_EN			((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
+
+/* Watchdog */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct watchdog {
+	u8 res1[0x34];
+	u32 wwps;		/* 0x34 r */
+	u8 res2[0x10];
+	u32 wspr;		/* 0x48 rw */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/* I2C base */
+#define I2C_BASE1		(OMAP44XX_L4_PER_BASE + 0x70000)
+#define I2C_BASE2		(OMAP44XX_L4_PER_BASE + 0x72000)
+#define I2C_BASE3		(OMAP44XX_L4_PER_BASE + 0x60000)
+#define I2C_BASE4		(OMAP44XX_L4_PER_BASE + 0x350000)
+
+/* MUSB base */
+#define MUSB_BASE		(OMAP44XX_L4_CORE_BASE + 0xAB000)
+
+/* OMAP4 GPIO registers */
+#define OMAP_GPIO_REVISION		0x0000
+#define OMAP_GPIO_SYSCONFIG		0x0010
+#define OMAP_GPIO_SYSSTATUS		0x0114
+#define OMAP_GPIO_IRQSTATUS1		0x0118
+#define OMAP_GPIO_IRQSTATUS2		0x0128
+#define OMAP_GPIO_IRQENABLE2		0x012c
+#define OMAP_GPIO_IRQENABLE1		0x011c
+#define OMAP_GPIO_WAKE_EN		0x0120
+#define OMAP_GPIO_CTRL			0x0130
+#define OMAP_GPIO_OE			0x0134
+#define OMAP_GPIO_DATAIN		0x0138
+#define OMAP_GPIO_DATAOUT		0x013c
+#define OMAP_GPIO_LEVELDETECT0		0x0140
+#define OMAP_GPIO_LEVELDETECT1		0x0144
+#define OMAP_GPIO_RISINGDETECT		0x0148
+#define OMAP_GPIO_FALLINGDETECT		0x014c
+#define OMAP_GPIO_DEBOUNCE_EN		0x0150
+#define OMAP_GPIO_DEBOUNCE_VAL		0x0154
+#define OMAP_GPIO_CLEARIRQENABLE1	0x0160
+#define OMAP_GPIO_SETIRQENABLE1		0x0164
+#define OMAP_GPIO_CLEARWKUENA		0x0180
+#define OMAP_GPIO_SETWKUENA		0x0184
+#define OMAP_GPIO_CLEARDATAOUT		0x0190
+#define OMAP_GPIO_SETDATAOUT		0x0194
+
+/*
+ * PRCM
+ */
+
+/* PRM */
+#define PRM_BASE		0x4A306000
+#define PRM_DEVICE_BASE		(PRM_BASE + 0x1B00)
+
+#define PRM_RSTCTRL		PRM_DEVICE_BASE
+#define PRM_RSTCTRL_RESET	0x01
+#define PRM_RSTST		(PRM_DEVICE_BASE + 0x4)
+#define PRM_RSTST_WARM_RESET_MASK	0x07EA
+
+#endif /* _CPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/ehci.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/ehci.h
new file mode 100644
index 000000000..30bdaad64
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/ehci.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * OMAP EHCI port support
+ * Based on LINUX KERNEL
+ * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ */
+
+#ifndef _OMAP4_EHCI_H_
+#define _OMAP4_EHCI_H_
+
+#define OMAP_EHCI_BASE				(OMAP44XX_L4_CORE_BASE + 0x64C00)
+#define OMAP_UHH_BASE				(OMAP44XX_L4_CORE_BASE + 0x64000)
+#define OMAP_USBTLL_BASE			(OMAP44XX_L4_CORE_BASE + 0x62000)
+
+/* UHH, TLL and opt clocks */
+#define CM_L3INIT_HSUSBHOST_CLKCTRL		0x4A009358UL
+
+#define HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK	(1 << 24)
+
+/* TLL Register Set */
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE		(1 << 3)
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP		(1 << 2)
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET		(1 << 1)
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY		(1 << 8)
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE		1
+
+#define OMAP_UHH_SYSCONFIG_SOFTRESET		1
+#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE	(1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOIDLE		(1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOSTDBY		(1 << 4)
+
+#define OMAP_UHH_SYSCONFIG_VAL	(OMAP_UHH_SYSCONFIG_NOIDLE | \
+					OMAP_UHH_SYSCONFIG_NOSTDBY)
+
+#endif /* _OMAP4_EHCI_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/gpio.h
new file mode 100644
index 000000000..aceb3e227
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/gpio.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This work is derived from the linux 2.6.27 kernel source
+ * To fetch, use the kernel repository
+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ * Use the v2.6.27 tag.
+ *
+ * Below is the original's header including its copyright
+ *
+ *  linux/arch/arm/plat-omap/gpio.c
+ *
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+#ifndef _GPIO_OMAP4_H
+#define _GPIO_OMAP4_H
+
+#include <asm/omap_gpio.h>
+
+#define OMAP_MAX_GPIO			192
+
+#define OMAP44XX_GPIO1_BASE		0x4A310000
+#define OMAP44XX_GPIO2_BASE		0x48055000
+#define OMAP44XX_GPIO3_BASE		0x48057000
+#define OMAP44XX_GPIO4_BASE		0x48059000
+#define OMAP44XX_GPIO5_BASE		0x4805B000
+#define OMAP44XX_GPIO6_BASE		0x4805D000
+
+#endif /* _GPIO_OMAP4_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/hardware.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/hardware.h
new file mode 100644
index 000000000..48dc80924
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/hardware.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * hardware.h
+ *
+ * hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef __OMAP_HARDWARE_H
+#define __OMAP_HARDWARE_H
+
+#include <asm/arch/omap.h>
+
+/*
+ * Common hardware definitions
+ */
+
+/* BCH Error Location Module */
+#define ELM_BASE			0x48078000
+
+/* GPMC Base address */
+#define GPMC_BASE			0x50000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/i2c.h
new file mode 100644
index 000000000..c8f2f9716
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/i2c.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2004-2010
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef _OMAP4_I2C_H_
+#define _OMAP4_I2C_H_
+
+#define I2C_DEFAULT_BASE	I2C_BASE1
+
+#endif /* _OMAP4_I2C_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/mem.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/mem.h
new file mode 100644
index 000000000..3026a002d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/mem.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author
+ *		Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * Initial Code from:
+ *		Richard Woodruff <r-woodruff2@ti.com>
+ */
+
+#ifndef _MEM_H_
+#define _MEM_H_
+
+/*
+ * GPMC settings -
+ * Definitions is as per the following format
+ * #define <PART>_GPMC_CONFIG<x> <value>
+ * Where:
+ * PART is the part name e.g. STNOR - Intel Strata Flash
+ * x is GPMC config registers from 1 to 6 (there will be 6 macros)
+ * Value is corresponding value
+ *
+ * For every valid PRCM configuration there should be only one definition of
+ * the same. if values are independent of the board, this definition will be
+ * present in this file if values are dependent on the board, then this should
+ * go into corresponding mem-boardName.h file
+ *
+ * Currently valid part Names are (PART):
+ * M_NAND - Micron NAND
+ * STNOR - STMicrolelctronics M29W128GL
+ */
+#define GPMC_SIZE_256M		0x0
+#define GPMC_SIZE_128M		0x8
+#define GPMC_SIZE_64M		0xC
+#define GPMC_SIZE_32M		0xE
+#define GPMC_SIZE_16M		0xF
+
+#define M_NAND_GPMC_CONFIG1	0x00000800
+#define M_NAND_GPMC_CONFIG2	0x001e1e00
+#define M_NAND_GPMC_CONFIG3	0x001e1e00
+#define M_NAND_GPMC_CONFIG4	0x16051807
+#define M_NAND_GPMC_CONFIG5	0x00151e1e
+#define M_NAND_GPMC_CONFIG6	0x16000f80
+#define M_NAND_GPMC_CONFIG7	0x00000008
+
+#define STNOR_GPMC_CONFIG1	0x00001200
+#define STNOR_GPMC_CONFIG2	0x00101000
+#define STNOR_GPMC_CONFIG3	0x00030301
+#define STNOR_GPMC_CONFIG4	0x10041004
+#define STNOR_GPMC_CONFIG5	0x000C1010
+#define STNOR_GPMC_CONFIG6	0x08070280
+#define STNOR_GPMC_CONFIG7	0x00000F48
+
+/* max number of GPMC Chip Selects */
+#define GPMC_MAX_CS		8
+/* max number of GPMC regs */
+#define GPMC_MAX_REG		7
+
+#endif /* endif _MEM_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/mmc_host_def.h
new file mode 100644
index 000000000..d06779956
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/mmc_host_def.h
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MMC_HOST_DEF_H
+#define MMC_HOST_DEF_H
+
+#include <asm/omap_mmc.h>
+
+/*
+ * OMAP HSMMC register definitions
+ */
+
+#define OMAP_HSMMC1_BASE	0x4809C000
+#define OMAP_HSMMC2_BASE	0x480B4000
+#define OMAP_HSMMC3_BASE	0x480AD000
+
+#endif /* MMC_HOST_DEF_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/mux_omap4.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/mux_omap4.h
new file mode 100644
index 000000000..854203c4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/mux_omap4.h
@@ -0,0 +1,328 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated
+ * Richard Woodruff		<r-woodruff2@ti.com>
+ * Aneesh V			<aneesh@ti.com>
+ * Balaji Krishnamoorthy	<balajitk@ti.com>
+ */
+#ifndef _MUX_OMAP4_H_
+#define _MUX_OMAP4_H_
+
+#include <asm/types.h>
+
+struct pad_conf_entry {
+
+	u16 offset;
+
+	u16 val;
+
+};
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_PD          (1 << 12)
+#define OFF_PU          (3 << 12)
+#define OFF_OUT_PTD     (0 << 10)
+#define OFF_OUT_PTU     (2 << 10)
+#define OFF_IN          (1 << 10)
+#define OFF_OUT         (0 << 10)
+#define OFF_EN          (1 << 9)
+#else
+#define OFF_PD          (0 << 12)
+#define OFF_PU          (0 << 12)
+#define OFF_OUT_PTD     (0 << 10)
+#define OFF_OUT_PTU     (0 << 10)
+#define OFF_IN          (0 << 10)
+#define OFF_OUT         (0 << 10)
+#define OFF_EN          (0 << 9)
+#endif
+
+#define IEN             (1 << 8)
+#define IDIS            (0 << 8)
+#define PTU             (3 << 3)
+#define PTD             (1 << 3)
+#define EN              (1 << 3)
+#define DIS             (0 << 3)
+
+#define M0              0
+#define M1              1
+#define M2              2
+#define M3              3
+#define M4              4
+#define M5              5
+#define M6              6
+#define M7              7
+
+#define SAFE_MODE	M7
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_IN_PD       (OFF_PD | OFF_IN | OFF_EN)
+#define OFF_IN_PU       (OFF_PU | OFF_IN | OFF_EN)
+#define OFF_OUT_PD      (OFF_OUT_PTD | OFF_OUT | OFF_EN)
+#define OFF_OUT_PU      (OFF_OUT_PTU | OFF_OUT | OFF_EN)
+#else
+#define OFF_IN_PD       0
+#define OFF_IN_PU       0
+#define OFF_OUT_PD      0
+#define OFF_OUT_PU      0
+#endif
+
+#define CORE_REVISION		0x0000
+#define CORE_HWINFO		0x0004
+#define CORE_SYSCONFIG		0x0010
+#define GPMC_AD0		0x0040
+#define GPMC_AD1		0x0042
+#define GPMC_AD2		0x0044
+#define GPMC_AD3		0x0046
+#define GPMC_AD4		0x0048
+#define GPMC_AD5		0x004A
+#define GPMC_AD6		0x004C
+#define GPMC_AD7		0x004E
+#define GPMC_AD8		0x0050
+#define GPMC_AD9		0x0052
+#define GPMC_AD10		0x0054
+#define GPMC_AD11		0x0056
+#define GPMC_AD12		0x0058
+#define GPMC_AD13		0x005A
+#define GPMC_AD14		0x005C
+#define GPMC_AD15		0x005E
+#define GPMC_A16		0x0060
+#define GPMC_A17		0x0062
+#define GPMC_A18		0x0064
+#define GPMC_A19		0x0066
+#define GPMC_A20		0x0068
+#define GPMC_A21		0x006A
+#define GPMC_A22		0x006C
+#define GPMC_A23		0x006E
+#define GPMC_A24		0x0070
+#define GPMC_A25		0x0072
+#define GPMC_NCS0		0x0074
+#define GPMC_NCS1		0x0076
+#define GPMC_NCS2		0x0078
+#define GPMC_NCS3		0x007A
+#define GPMC_NWP		0x007C
+#define GPMC_CLK		0x007E
+#define GPMC_NADV_ALE		0x0080
+#define GPMC_NOE		0x0082
+#define GPMC_NWE		0x0084
+#define GPMC_NBE0_CLE		0x0086
+#define GPMC_NBE1		0x0088
+#define GPMC_WAIT0		0x008A
+#define GPMC_WAIT1		0x008C
+#define C2C_DATA11		0x008E
+#define C2C_DATA12		0x0090
+#define C2C_DATA13		0x0092
+#define C2C_DATA14		0x0094
+#define C2C_DATA15		0x0096
+#define HDMI_HPD		0x0098
+#define HDMI_CEC		0x009A
+#define HDMI_DDC_SCL		0x009C
+#define HDMI_DDC_SDA		0x009E
+#define CSI21_DX0		0x00A0
+#define CSI21_DY0		0x00A2
+#define CSI21_DX1		0x00A4
+#define CSI21_DY1		0x00A6
+#define CSI21_DX2		0x00A8
+#define CSI21_DY2		0x00AA
+#define CSI21_DX3		0x00AC
+#define CSI21_DY3		0x00AE
+#define CSI21_DX4		0x00B0
+#define CSI21_DY4		0x00B2
+#define CSI22_DX0		0x00B4
+#define CSI22_DY0		0x00B6
+#define CSI22_DX1		0x00B8
+#define CSI22_DY1		0x00BA
+#define CAM_SHUTTER		0x00BC
+#define CAM_STROBE		0x00BE
+#define CAM_GLOBALRESET		0x00C0
+#define USBB1_ULPITLL_CLK	0x00C2
+#define USBB1_ULPITLL_STP	0x00C4
+#define USBB1_ULPITLL_DIR	0x00C6
+#define USBB1_ULPITLL_NXT	0x00C8
+#define USBB1_ULPITLL_DAT0	0x00CA
+#define USBB1_ULPITLL_DAT1	0x00CC
+#define USBB1_ULPITLL_DAT2	0x00CE
+#define USBB1_ULPITLL_DAT3	0x00D0
+#define USBB1_ULPITLL_DAT4	0x00D2
+#define USBB1_ULPITLL_DAT5	0x00D4
+#define USBB1_ULPITLL_DAT6	0x00D6
+#define USBB1_ULPITLL_DAT7	0x00D8
+#define USBB1_HSIC_DATA		0x00DA
+#define USBB1_HSIC_STROBE	0x00DC
+#define USBC1_ICUSB_DP		0x00DE
+#define USBC1_ICUSB_DM		0x00E0
+#define SDMMC1_CLK		0x00E2
+#define SDMMC1_CMD		0x00E4
+#define SDMMC1_DAT0		0x00E6
+#define SDMMC1_DAT1		0x00E8
+#define SDMMC1_DAT2		0x00EA
+#define SDMMC1_DAT3		0x00EC
+#define SDMMC1_DAT4		0x00EE
+#define SDMMC1_DAT5		0x00F0
+#define SDMMC1_DAT6		0x00F2
+#define SDMMC1_DAT7		0x00F4
+#define ABE_MCBSP2_CLKX		0x00F6
+#define ABE_MCBSP2_DR		0x00F8
+#define ABE_MCBSP2_DX		0x00FA
+#define ABE_MCBSP2_FSX		0x00FC
+#define ABE_MCBSP1_CLKX		0x00FE
+#define ABE_MCBSP1_DR		0x0100
+#define ABE_MCBSP1_DX		0x0102
+#define ABE_MCBSP1_FSX		0x0104
+#define ABE_PDM_UL_DATA		0x0106
+#define ABE_PDM_DL_DATA		0x0108
+#define ABE_PDM_FRAME		0x010A
+#define ABE_PDM_LB_CLK		0x010C
+#define ABE_CLKS		0x010E
+#define ABE_DMIC_CLK1		0x0110
+#define ABE_DMIC_DIN1		0x0112
+#define ABE_DMIC_DIN2		0x0114
+#define ABE_DMIC_DIN3		0x0116
+#define UART2_CTS		0x0118
+#define UART2_RTS		0x011A
+#define UART2_RX		0x011C
+#define UART2_TX		0x011E
+#define HDQ_SIO			0x0120
+#define I2C1_SCL		0x0122
+#define I2C1_SDA		0x0124
+#define I2C2_SCL		0x0126
+#define I2C2_SDA		0x0128
+#define I2C3_SCL		0x012A
+#define I2C3_SDA		0x012C
+#define I2C4_SCL		0x012E
+#define I2C4_SDA		0x0130
+#define MCSPI1_CLK		0x0132
+#define MCSPI1_SOMI		0x0134
+#define MCSPI1_SIMO		0x0136
+#define MCSPI1_CS0		0x0138
+#define MCSPI1_CS1		0x013A
+#define MCSPI1_CS2		0x013C
+#define MCSPI1_CS3		0x013E
+#define UART3_CTS_RCTX		0x0140
+#define UART3_RTS_SD		0x0142
+#define UART3_RX_IRRX		0x0144
+#define UART3_TX_IRTX		0x0146
+#define SDMMC5_CLK		0x0148
+#define SDMMC5_CMD		0x014A
+#define SDMMC5_DAT0		0x014C
+#define SDMMC5_DAT1		0x014E
+#define SDMMC5_DAT2		0x0150
+#define SDMMC5_DAT3		0x0152
+#define MCSPI4_CLK		0x0154
+#define MCSPI4_SIMO		0x0156
+#define MCSPI4_SOMI		0x0158
+#define MCSPI4_CS0		0x015A
+#define UART4_RX		0x015C
+#define UART4_TX		0x015E
+#define USBB2_ULPITLL_CLK	0x0160
+#define USBB2_ULPITLL_STP	0x0162
+#define USBB2_ULPITLL_DIR	0x0164
+#define USBB2_ULPITLL_NXT	0x0166
+#define USBB2_ULPITLL_DAT0	0x0168
+#define USBB2_ULPITLL_DAT1	0x016A
+#define USBB2_ULPITLL_DAT2	0x016C
+#define USBB2_ULPITLL_DAT3	0x016E
+#define USBB2_ULPITLL_DAT4	0x0170
+#define USBB2_ULPITLL_DAT5	0x0172
+#define USBB2_ULPITLL_DAT6	0x0174
+#define USBB2_ULPITLL_DAT7	0x0176
+#define USBB2_HSIC_DATA		0x0178
+#define USBB2_HSIC_STROBE	0x017A
+#define UNIPRO_TX0		0x017C
+#define UNIPRO_TY0		0x017E
+#define UNIPRO_TX1		0x0180
+#define UNIPRO_TY1		0x0182
+#define UNIPRO_TX2		0x0184
+#define UNIPRO_TY2		0x0186
+#define UNIPRO_RX0		0x0188
+#define UNIPRO_RY0		0x018A
+#define UNIPRO_RX1		0x018C
+#define UNIPRO_RY1		0x018E
+#define UNIPRO_RX2		0x0190
+#define UNIPRO_RY2		0x0192
+#define USBA0_OTG_CE		0x0194
+#define USBA0_OTG_DP		0x0196
+#define USBA0_OTG_DM		0x0198
+#define FREF_CLK1_OUT		0x019A
+#define FREF_CLK2_OUT		0x019C
+#define SYS_NIRQ1		0x019E
+#define SYS_NIRQ2		0x01A0
+#define SYS_BOOT0		0x01A2
+#define SYS_BOOT1		0x01A4
+#define SYS_BOOT2		0x01A6
+#define SYS_BOOT3		0x01A8
+#define SYS_BOOT4		0x01AA
+#define SYS_BOOT5		0x01AC
+#define DPM_EMU0		0x01AE
+#define DPM_EMU1		0x01B0
+#define DPM_EMU2		0x01B2
+#define DPM_EMU3		0x01B4
+#define DPM_EMU4		0x01B6
+#define DPM_EMU5		0x01B8
+#define DPM_EMU6		0x01BA
+#define DPM_EMU7		0x01BC
+#define DPM_EMU8		0x01BE
+#define DPM_EMU9		0x01C0
+#define DPM_EMU10		0x01C2
+#define DPM_EMU11		0x01C4
+#define DPM_EMU12		0x01C6
+#define DPM_EMU13		0x01C8
+#define DPM_EMU14		0x01CA
+#define DPM_EMU15		0x01CC
+#define DPM_EMU16		0x01CE
+#define DPM_EMU17		0x01D0
+#define DPM_EMU18		0x01D2
+#define DPM_EMU19		0x01D4
+#define WAKEUPEVENT_0		0x01D8
+#define WAKEUPEVENT_1		0x01DC
+#define WAKEUPEVENT_2		0x01E0
+#define WAKEUPEVENT_3		0x01E4
+#define WAKEUPEVENT_4		0x01E8
+#define WAKEUPEVENT_5		0x01EC
+#define WAKEUPEVENT_6		0x01F0
+
+#define WKUP_REVISION		0x0000
+#define WKUP_HWINFO		0x0004
+#define WKUP_SYSCONFIG		0x0010
+#define PAD0_SIM_IO		0x0040
+#define PAD1_SIM_CLK		0x0042
+#define PAD0_SIM_RESET		0x0044
+#define PAD1_SIM_CD		0x0046
+#define PAD0_SIM_PWRCTRL		0x0048
+#define PAD1_SR_SCL		0x004A
+#define PAD0_SR_SDA		0x004C
+#define PAD1_FREF_XTAL_IN		0x004E
+#define PAD0_FREF_SLICER_IN	0x0050
+#define PAD1_FREF_CLK_IOREQ	0x0052
+#define PAD0_FREF_CLK0_OUT		0x0054
+#define PAD1_FREF_CLK3_REQ		0x0056
+#define PAD0_FREF_CLK3_OUT		0x0058
+#define PAD1_FREF_CLK4_REQ		0x005A
+#define PAD0_FREF_CLK4_OUT		0x005C
+#define PAD1_SYS_32K		0x005E
+#define PAD0_SYS_NRESPWRON		0x0060
+#define PAD1_SYS_NRESWARM		0x0062
+#define PAD0_SYS_PWR_REQ		0x0064
+#define PAD1_SYS_PWRON_RESET	0x0066
+#define PAD0_SYS_BOOT6		0x0068
+#define PAD1_SYS_BOOT7		0x006A
+#define PAD0_JTAG_NTRST		0x006C
+#define PAD1_JTAG_TCK		0x006D
+#define PAD0_JTAG_RTCK		0x0070
+#define PAD1_JTAG_TMS_TMSC		0x0072
+#define PAD0_JTAG_TDI		0x0074
+#define PAD1_JTAG_TDO		0x0076
+#define PADCONF_WAKEUPEVENT_0	0x007C
+#define CONTROL_SMART1NOPMIO_PADCONF_0		0x05A0
+#define CONTROL_SMART1NOPMIO_PADCONF_1		0x05A4
+#define PADCONF_MODE		0x05A8
+#define CONTROL_XTAL_OSCILLATOR			0x05AC
+#define CONTROL_CONTROL_I2C_2			0x0604
+#define CONTROL_CONTROL_JTAG			0x0608
+#define CONTROL_CONTROL_SYS			0x060C
+#define CONTROL_SPARE_RW		0x0614
+#define CONTROL_SPARE_R		0x0618
+#define CONTROL_SPARE_R_C0		0x061C
+
+#define CONTROL_WKUP_PAD1_FREF_CLK4_REQ	0x4A31E05A
+#endif /* _MUX_OMAP4_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/omap.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/omap.h
new file mode 100644
index 000000000..8919088a7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/omap.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Authors:
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * Derived from OMAP3 work by
+ *	Richard Woodruff <r-woodruff2@ti.com>
+ *	Syed Mohammed Khasim <x0khasim@ti.com>
+ */
+
+#ifndef _OMAP4_H_
+#define _OMAP4_H_
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#include <linux/sizes.h>
+
+/*
+ * L4 Peripherals - L4 Wakeup and L4 Core now
+ */
+#define OMAP44XX_L4_CORE_BASE	0x4A000000
+#define OMAP44XX_L4_WKUP_BASE	0x4A300000
+#define OMAP44XX_L4_PER_BASE	0x48000000
+
+#define OMAP44XX_DRAM_ADDR_SPACE_START	0x80000000
+#define OMAP44XX_DRAM_ADDR_SPACE_END	0xD0000000
+#define DRAM_ADDR_SPACE_START	OMAP44XX_DRAM_ADDR_SPACE_START
+#define DRAM_ADDR_SPACE_END	OMAP44XX_DRAM_ADDR_SPACE_END
+
+/* CONTROL_ID_CODE */
+#define CONTROL_ID_CODE		0x4A002204
+
+#define OMAP4_CONTROL_ID_CODE_ES1_0	0x0B85202F
+#define OMAP4_CONTROL_ID_CODE_ES2_0	0x1B85202F
+#define OMAP4_CONTROL_ID_CODE_ES2_1	0x3B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_2	0x4B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_3	0x6B95C02F
+#define OMAP4460_CONTROL_ID_CODE_ES1_0	0x0B94E02F
+#define OMAP4460_CONTROL_ID_CODE_ES1_1	0x2B94E02F
+#define OMAP4470_CONTROL_ID_CODE_ES1_0	0x0B97502F
+
+/* UART */
+#define UART1_BASE		(OMAP44XX_L4_PER_BASE + 0x6a000)
+#define UART2_BASE		(OMAP44XX_L4_PER_BASE + 0x6c000)
+#define UART3_BASE		(OMAP44XX_L4_PER_BASE + 0x20000)
+
+/* General Purpose Timers */
+#define GPT1_BASE		(OMAP44XX_L4_WKUP_BASE + 0x18000)
+#define GPT2_BASE		(OMAP44XX_L4_PER_BASE  + 0x32000)
+#define GPT3_BASE		(OMAP44XX_L4_PER_BASE  + 0x34000)
+
+/* Watchdog Timer2 - MPU watchdog */
+#define WDT2_BASE		(OMAP44XX_L4_WKUP_BASE + 0x14000)
+
+/*
+ * Hardware Register Details
+ */
+
+/* Watchdog Timer */
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+/* GP Timer */
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/* Control Module */
+#define LDOSRAM_ACTMODE_VSET_IN_MASK	(0x1F << 5)
+#define LDOSRAM_VOLT_CTRL_OVERRIDE	0x0401040f
+#define CONTROL_EFUSE_1_OVERRIDE	0x1C4D0110
+#define CONTROL_EFUSE_2_OVERRIDE	0x99084000
+
+/* LPDDR2 IO regs */
+#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN	0x1C1C1C1C
+#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER	0x9E9E9E9E
+#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN	0x7C7C7C7C
+#define LPDDR2IO_GR10_WD_MASK				(3 << 17)
+#define CONTROL_LPDDR2IO_3_VAL		0xA0888C0F
+
+/* CONTROL_EFUSE_2 */
+#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1		0x00ffc000
+
+#define MMC1_PWRDNZ					(1 << 26)
+#define MMC1_PBIASLITE_PWRDNZ				(1 << 22)
+#define MMC1_PBIASLITE_VMODE				(1 << 21)
+
+#ifndef __ASSEMBLY__
+
+struct s32ktimer {
+	unsigned char res[0x10];
+	unsigned int s32k_cr;	/* 0x10 */
+};
+
+#define DEVICE_TYPE_SHIFT (0x8)
+#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Non-secure SRAM Addresses
+ * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
+ * at 0x40304000(EMU base) so that our code works for both EMU and GP
+ */
+#define NON_SECURE_SRAM_START	0x40304000
+#define NON_SECURE_SRAM_END	0x4030E000	/* Not inclusive */
+#define NON_SECURE_SRAM_IMG_END	0x4030C000
+#define SRAM_SCRATCH_SPACE_ADDR	(NON_SECURE_SRAM_IMG_END - SZ_1K)
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_ROM_VECT_BASE	0x4030D000
+
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		50
+#define OMAP_ABB_CLOCK_CYCLES		16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK	(0x1 << 7)
+
+#define OMAP44XX_SAR_RAM_BASE		0x4a326000
+#define OMAP_REBOOT_REASON_OFFSET	0xA0C
+#define OMAP_REBOOT_REASON_SIZE		0x0F
+
+/* Boot parameters */
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+	unsigned int boot_message;
+	unsigned int boot_device_descriptor;
+	unsigned char boot_device;
+	unsigned char reset_reason;
+	unsigned char ch_flags;
+};
+
+int omap_reboot_mode(char *mode, unsigned int length);
+int omap_reboot_mode_clear(void);
+int omap_reboot_mode_store(char *mode);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/spl.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/spl.h
new file mode 100644
index 000000000..d24944af0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/spl.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_NONE	0x00
+#define BOOT_DEVICE_XIP		0x01
+#define BOOT_DEVICE_XIPWAIT	0x02
+#define BOOT_DEVICE_NAND	0x03
+#define BOOT_DEVICE_ONENAND	0x04
+#define BOOT_DEVICE_MMC1	0x05
+#define BOOT_DEVICE_MMC2	0x06
+#define BOOT_DEVICE_MMC2_2	0x07
+#define BOOT_DEVICE_UART	0x43
+#define BOOT_DEVICE_USB		0x45
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/sys_proto.h
new file mode 100644
index 000000000..b2a688765
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/arch/omap.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/omap_common.h>
+#include <linux/mtd/omap_gpmc.h>
+#include <asm/arch/mux_omap4.h>
+#include <asm/ti-common/sys_proto.h>
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
+extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
+extern const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2;
+extern const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2;
+extern const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2;
+#else
+extern const struct lpddr2_device_details elpida_2G_S4_details;
+extern const struct lpddr2_device_details elpida_4G_S4_details;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+extern const struct lpddr2_device_timings jedec_default_timings;
+#else
+extern const struct lpddr2_device_timings elpida_2G_S4_timings;
+#endif
+
+struct omap_sysinfo {
+	char *board_string;
+};
+extern const struct omap_sysinfo sysinfo;
+
+void gpmc_init(void);
+void watchdog_init(void);
+u32 get_device_type(void);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs(void);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
+void setup_early_clocks(void);
+void prcm_init(void);
+void do_board_detect(void);
+void bypass_dpll(u32 const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap4_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap_sdram_size(void);
+u32 cortex_rev(void);
+void save_omap_boot_params(void);
+void init_omap_revision(void);
+void do_io_settings(void);
+void sri2c_init(void);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
+u32 warm_reset(void);
+void force_emif_self_refresh(void);
+void setup_warmreset_time(void);
+
+#define OMAP4_SERVICE_PL310_CONTROL_REG_SET	0x102
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/clock.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/clock.h
new file mode 100644
index 000000000..87eb3f335
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/clock.h
@@ -0,0 +1,416 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ *	Aneesh V <aneesh@ti.com>
+ *	Sricharan R <r.sricharan@ti.com>
+ */
+#ifndef _CLOCKS_OMAP5_H_
+#define _CLOCKS_OMAP5_H_
+#include <asm/omap_common.h>
+
+/*
+ * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
+ * loop, allow for a minimum of 2 ms wait (in reality the wait will be
+ * much more than that)
+ */
+#define LDELAY		1000000
+
+/* CM_DLL_CTRL */
+#define CM_DLL_CTRL_OVERRIDE_SHIFT		0
+#define CM_DLL_CTRL_OVERRIDE_MASK		(1 << 0)
+#define CM_DLL_CTRL_NO_OVERRIDE			0
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT		11
+#define CM_CLKMODE_DPLL_REGM4XEN_MASK		(1 << 11)
+#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT		10
+#define CM_CLKMODE_DPLL_LPMODE_EN_MASK		(1 << 10)
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT	9
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK	(1 << 9)
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT	8
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK	(1 << 8)
+#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT		5
+#define CM_CLKMODE_DPLL_RAMP_RATE_MASK		(0x7 << 5)
+#define CM_CLKMODE_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_EN_MASK			(0x7 << 0)
+
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK		7
+
+#define DPLL_EN_STOP			1
+#define DPLL_EN_MN_BYPASS		4
+#define DPLL_EN_LOW_POWER_BYPASS	5
+#define DPLL_EN_FAST_RELOCK_BYPASS	6
+#define DPLL_EN_LOCK			7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK		1
+
+/* SGX */
+#define CLKSEL_GPU_HYD_GCLK_MASK		(1 << 25)
+#define CLKSEL_GPU_CORE_GCLK_MASK		(1 << 24)
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT	24
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK		(0xFF << 24)
+#define CM_CLKSEL_DPLL_M_SHIFT			8
+#define CM_CLKSEL_DPLL_M_MASK			(0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT			0
+#define CM_CLKSEL_DPLL_N_MASK			0x7F
+#define CM_CLKSEL_DCC_EN_SHIFT			22
+#define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
+
+/* CM_SYS_CLKSEL */
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK  7
+
+/* CM_CLKSEL_CORE */
+#define CLKSEL_CORE_SHIFT	0
+#define CLKSEL_L3_SHIFT		4
+#define CLKSEL_L4_SHIFT		8
+
+#define CLKSEL_CORE_X2_DIV_1	0
+#define CLKSEL_L3_CORE_DIV_2	1
+#define CLKSEL_L4_L3_DIV_2	1
+
+/* CM_ABE_PLL_REF_CLKSEL */
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK	1
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK	1
+
+/* CM_CLKSEL_ABE_PLL_SYS */
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT	0
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK	1
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1		0
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2		1
+
+/* CM_BYPCLK_DPLL_IVA */
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT		0
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK		3
+
+#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2		1
+
+/* CM_SHADOW_FREQ_CONFIG1 */
+#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK	1
+#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK	4
+#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK	8
+
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT	8
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK	(7 << 8)
+
+#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT	11
+#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK		(0x1F << 11)
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT		0
+#define CD_CLKCTRL_CLKTRCTRL_MASK		3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP		0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP		1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP		2
+#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO		3
+
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT		0
+#define MODULE_CLKCTRL_MODULEMODE_MASK		3
+#define MODULE_CLKCTRL_IDLEST_SHIFT		16
+#define MODULE_CLKCTRL_IDLEST_MASK		(3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE		0
+#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO		1
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN	2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL	0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING	1
+#define MODULE_CLKCTRL_IDLEST_IDLE		2
+#define MODULE_CLKCTRL_IDLEST_DISABLED		3
+
+/* CM_L4PER_GPIO4_CLKCTRL */
+#define GPIO4_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_L3INIT_HSMMCn_CLKCTRL */
+#define HSMMC_CLKCTRL_CLKSEL_MASK		(1 << 24)
+#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK		(3 << 25)
+
+/* CM_L3INIT_SATA_CLKCTRL */
+#define SATA_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_WKUP_GPTIMER1_CLKCTRL */
+#define GPTIMER1_CLKCTRL_CLKSEL_MASK		(1 << 24)
+
+/* CM_CAM_ISS_CLKCTRL */
+#define ISS_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_DSS_DSS_CLKCTRL */
+#define DSS_CLKCTRL_OPTFCLKEN_MASK		0xF00
+
+/* CM_L3INIT_USBPHY_CLKCTRL */
+#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK	8
+
+/* CM_L3INIT_USB_HOST_HS_CLKCTRL */
+#define OPTFCLKEN_FUNC48M_CLK			(1 << 15)
+#define OPTFCLKEN_HSIC480M_P2_CLK		(1 << 14)
+#define OPTFCLKEN_HSIC480M_P1_CLK		(1 << 13)
+#define OPTFCLKEN_HSIC60M_P2_CLK		(1 << 12)
+#define OPTFCLKEN_HSIC60M_P1_CLK		(1 << 11)
+#define OPTFCLKEN_UTMI_P3_CLK			(1 << 10)
+#define OPTFCLKEN_UTMI_P2_CLK			(1 << 9)
+#define OPTFCLKEN_UTMI_P1_CLK			(1 << 8)
+#define OPTFCLKEN_HSIC480M_P3_CLK		(1 << 7)
+#define OPTFCLKEN_HSIC60M_P3_CLK		(1 << 6)
+
+/* CM_L3INIT_USB_TLL_HS_CLKCTRL */
+#define OPTFCLKEN_USB_CH0_CLK_ENABLE	(1 << 8)
+#define OPTFCLKEN_USB_CH1_CLK_ENABLE	(1 << 9)
+#define OPTFCLKEN_USB_CH2_CLK_ENABLE	(1 << 10)
+
+/* CM_COREAON_USB_PHY_CORE_CLKCTRL */
+#define USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K	(1 << 8)
+
+/* CM_COREAON_L3INIT_60M_GFCLK_CLKCTRL */
+#define L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK	(1 << 8)
+
+/* CM_L3INIT_USB_OTG_SS_CLKCTRL */
+#define OTG_SS_CLKCTRL_MODULEMODE_HW	(1 << 0)
+#define OPTFCLKEN_REFCLK960M			(1 << 8)
+
+/* CM_L3INIT_OCP2SCP1_CLKCTRL */
+#define OCP2SCP1_CLKCTRL_MODULEMODE_HW	(1 << 0)
+
+/* CM_MPU_MPU_CLKCTRL */
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT	24
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK	(3 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT	26
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK	(1 << 26)
+
+/* CM_WKUPAON_SCRM_CLKCTRL */
+#define OPTFCLKEN_SCRM_PER_SHIFT		9
+#define OPTFCLKEN_SCRM_PER_MASK			(1 << 9)
+#define OPTFCLKEN_SCRM_CORE_SHIFT		8
+#define OPTFCLKEN_SCRM_CORE_MASK		(1 << 8)
+
+/* CM_COREAON_IO_SRCOMP_CLKCTRL */
+#define OPTFCLKEN_SRCOMP_FCLK_SHIFT		8
+#define OPTFCLKEN_SRCOMP_FCLK_MASK		(1 << 8)
+
+/* PRM_RSTTIME */
+#define RSTTIME1_SHIFT				0
+#define RSTTIME1_MASK				(0x3ff << 0)
+
+/* Clock frequencies */
+#define OMAP_SYS_CLK_IND_38_4_MHZ	6
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
+
+/* CTRL_CORE_SRCOMP_NORTH_SIDE */
+#define USB2PHY_DISCHGDET	(1 << 29)
+#define USB2PHY_AUTORESUME_EN (1 << 30)
+
+/* SMPS */
+#define SMPS_I2C_SLAVE_ADDR	0x12
+#define SMPS_REG_ADDR_12_MPU	0x23
+#define SMPS_REG_ADDR_45_IVA	0x2B
+#define SMPS_REG_ADDR_8_CORE	0x37
+
+/* PALMAS VOLTAGE SETTINGS in mv for OPP_NOMINAL */
+/* ES1.0 settings */
+#define VDD_MPU		1040
+#define VDD_MM		1040
+#define VDD_CORE	1040
+
+#define VDD_MPU_LOW	890
+#define VDD_MM_LOW	890
+#define VDD_CORE_LOW	890
+
+/* ES2.0 settings */
+#define VDD_MPU_ES2	1060
+#define VDD_MM_ES2	1025
+#define VDD_CORE_ES2	1040
+
+#define VDD_MPU_ES2_HIGH 1250
+#define VDD_MM_ES2_OD  1120
+
+/* Efuse register offsets for OMAP5 platform */
+#define OMAP5_ES2_EFUSE_BASE	0x4A002000
+#define OMAP5_ES2_PROD_REGBITS	16
+
+/* CONTROL_STD_FUSE_OPP_VDD_CORE_3 */
+#define OMAP5_ES2_PROD_CORE_OPNO_VMIN	(OMAP5_ES2_EFUSE_BASE + 0x1D8)
+
+/* CONTROL_STD_FUSE_OPP_VDD_MM_4 */
+#define OMAP5_ES2_PROD_MM_OPNO_VMIN	(OMAP5_ES2_EFUSE_BASE + 0x1A4)
+/* CONTROL_STD_FUSE_OPP_VDD_MM_5 */
+#define OMAP5_ES2_PROD_MM_OPOD_VMIN	(OMAP5_ES2_EFUSE_BASE + 0x1A8)
+/* CONTROL_STD_FUSE_OPP_VDD_MPU_6 */
+#define OMAP5_ES2_PROD_MPU_OPNO_VMIN	(OMAP5_ES2_EFUSE_BASE + 0x1C4)
+/* CONTROL_STD_FUSE_OPP_VDD_MPU_7 */
+#define OMAP5_ES2_PROD_MPU_OPHI_VMIN	(OMAP5_ES2_EFUSE_BASE + 0x1C8)
+
+/* DRA74x/75x/72x voltage settings in mv for OPP_NOM per DM */
+#define VDD_MPU_DRA7_NOM	1150
+#define VDD_CORE_DRA7_NOM	1150
+#define VDD_EVE_DRA7_NOM	1060
+#define VDD_GPU_DRA7_NOM	1060
+#define VDD_IVA_DRA7_NOM	1060
+
+/* DRA74x/75x/72x voltage settings in mv for OPP_OD per DM */
+#define VDD_EVE_DRA7_OD		1150
+#define VDD_GPU_DRA7_OD		1150
+#define VDD_IVA_DRA7_OD		1150
+
+/* DRA74x/75x/72x voltage settings in mv for OPP_HIGH per DM */
+#define VDD_EVE_DRA7_HIGH	1250
+#define VDD_GPU_DRA7_HIGH	1250
+#define VDD_IVA_DRA7_HIGH	1250
+
+/* Efuse register offsets for DRA7xx platform */
+#define DRA752_EFUSE_BASE	0x4A002000
+#define DRA752_EFUSE_REGBITS	16
+/* STD_FUSE_OPP_VMIN_IVA_2 */
+#define STD_FUSE_OPP_VMIN_IVA_NOM	(DRA752_EFUSE_BASE + 0x05CC)
+/* STD_FUSE_OPP_VMIN_IVA_3 */
+#define STD_FUSE_OPP_VMIN_IVA_OD	(DRA752_EFUSE_BASE + 0x05D0)
+/* STD_FUSE_OPP_VMIN_IVA_4 */
+#define STD_FUSE_OPP_VMIN_IVA_HIGH	(DRA752_EFUSE_BASE + 0x05D4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_2 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_NOM	(DRA752_EFUSE_BASE + 0x05E0)
+/* STD_FUSE_OPP_VMIN_DSPEVE_3 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_OD	(DRA752_EFUSE_BASE + 0x05E4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_4 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH	(DRA752_EFUSE_BASE + 0x05E8)
+/* STD_FUSE_OPP_VMIN_CORE_2 */
+#define STD_FUSE_OPP_VMIN_CORE_NOM	(DRA752_EFUSE_BASE + 0x05F4)
+/* STD_FUSE_OPP_VMIN_GPU_2 */
+#define STD_FUSE_OPP_VMIN_GPU_NOM	(DRA752_EFUSE_BASE + 0x1B08)
+/* STD_FUSE_OPP_VMIN_GPU_3 */
+#define STD_FUSE_OPP_VMIN_GPU_OD	(DRA752_EFUSE_BASE + 0x1B0C)
+/* STD_FUSE_OPP_VMIN_GPU_4 */
+#define STD_FUSE_OPP_VMIN_GPU_HIGH	(DRA752_EFUSE_BASE + 0x1B10)
+/* STD_FUSE_OPP_VMIN_MPU_2 */
+#define STD_FUSE_OPP_VMIN_MPU_NOM	(DRA752_EFUSE_BASE + 0x1B20)
+/* STD_FUSE_OPP_VMIN_MPU_3 */
+#define STD_FUSE_OPP_VMIN_MPU_OD	(DRA752_EFUSE_BASE + 0x1B24)
+/* STD_FUSE_OPP_VMIN_MPU_4 */
+#define STD_FUSE_OPP_VMIN_MPU_HIGH	(DRA752_EFUSE_BASE + 0x1B28)
+
+#if defined(CONFIG_DRA7_MPU_OPP_HIGH)
+#define DRA7_MPU_OPP	OPP_HIGH
+#elif defined(CONFIG_DRA7_MPU_OPP_OD)
+#define DRA7_MPU_OPP	OPP_OD
+#else /* OPP_NOM default */
+#define DRA7_MPU_OPP	OPP_NOM
+#endif
+
+/* OPP_NOM only available option for CORE */
+#define DRA7_CORE_OPP	OPP_NOM
+
+#if defined(CONFIG_DRA7_DSPEVE_OPP_HIGH)
+#define DRA7_DSPEVE_OPP	OPP_HIGH
+#elif defined(CONFIG_DRA7_DSPEVE_OPP_OD)
+#define DRA7_DSPEVE_OPP	OPP_OD
+#else /* OPP_NOM default */
+#define DRA7_DSPEVE_OPP	OPP_NOM
+#endif
+
+#if defined(CONFIG_DRA7_IVA_OPP_HIGH)
+#define DRA7_IVA_OPP	OPP_HIGH
+#elif defined(CONFIG_DRA7_IVA_OPP_OD)
+#define DRA7_IVA_OPP	OPP_OD
+#else /* OPP_NOM default */
+#define DRA7_IVA_OPP	OPP_NOM
+#endif
+
+#if defined(CONFIG_DRA7_GPU_OPP_HIGH)
+#define DRA7_GPU_OPP	OPP_HIGH
+#elif defined(CONFIG_DRA7_GPU_OPP_OD)
+#define DRA7_GPU_OPP	OPP_OD
+#else /* OPP_NOM default */
+#define DRA7_GPU_OPP	OPP_NOM
+#endif
+
+/* Standard offset is 0.5v expressed in uv */
+#define PALMAS_SMPS_BASE_VOLT_UV 500000
+
+/* Offset is 0.73V for LP873x */
+#define LP873X_BUCK_BASE_VOLT_UV		730000
+
+/* Offset is 0.73V for LP87565 */
+#define LP87565_BUCK_BASE_VOLT_UV		730000
+
+/* TPS659038 */
+#define TPS659038_I2C_SLAVE_ADDR		0x58
+#define TPS659038_REG_ADDR_SMPS12		0x23
+#define TPS659038_REG_ADDR_SMPS45		0x2B
+#define TPS659038_REG_ADDR_SMPS6		0x2F
+#define TPS659038_REG_ADDR_SMPS7		0x33
+#define TPS659038_REG_ADDR_SMPS8		0x37
+
+/* TPS65917 */
+#define TPS65917_I2C_SLAVE_ADDR		0x58
+#define TPS65917_REG_ADDR_SMPS1		0x23
+#define TPS65917_REG_ADDR_SMPS2		0x27
+#define TPS65917_REG_ADDR_SMPS3		0x2F
+#define TPS65917_REG_ADDR_SMPS4		0x33
+
+/* LP873X */
+#define LP873X_I2C_SLAVE_ADDR		0x60
+#define LP873X_REG_ADDR_BUCK0		0x6
+#define LP873X_REG_ADDR_BUCK1		0x7
+#define LP873X_REG_ADDR_LDO1		0xA
+
+/* LP87565 */
+#define LP87565_I2C_SLAVE_ADDR		0x61
+#define LP87565_REG_ADDR_BUCK01		0xA
+#define LP87565_REG_ADDR_BUCK23		0xE
+
+/* TPS */
+#define TPS62361_I2C_SLAVE_ADDR		0x60
+#define TPS62361_REG_ADDR_SET0		0x0
+#define TPS62361_REG_ADDR_SET1		0x1
+#define TPS62361_REG_ADDR_SET2		0x2
+#define TPS62361_REG_ADDR_SET3		0x3
+#define TPS62361_REG_ADDR_CTRL		0x4
+#define TPS62361_REG_ADDR_TEMP		0x5
+#define TPS62361_REG_ADDR_RMP_CTRL	0x6
+#define TPS62361_REG_ADDR_CHIP_ID	0x8
+#define TPS62361_REG_ADDR_CHIP_ID_2	0x9
+
+#define TPS62361_BASE_VOLT_MV	500
+#define TPS62361_VSEL0_GPIO	7
+
+/* Defines for DPLL setup */
+#define DPLL_LOCKED_FREQ_TOLERANCE_0		0
+#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ	500
+#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ	1000
+
+#define DPLL_NO_LOCK	0
+#define DPLL_LOCK	1
+
+#if defined(CONFIG_DRA7XX)
+#define V_OSCK			20000000	/* Clock output from T2 */
+#else
+#define V_OSCK			19200000	/* Clock output from T2 */
+#endif
+
+#define V_SCLK	V_OSCK
+
+/* CKO buffer control */
+#define CKOBUFFER_CLK_ENABLE_MASK	(1 << 28)
+
+/* AUXCLKx reg fields */
+#define AUXCLK_ENABLE_MASK		(1 << 8)
+#define AUXCLK_SRCSELECT_SHIFT		1
+#define AUXCLK_SRCSELECT_MASK		(3 << 1)
+#define AUXCLK_CLKDIV_SHIFT		16
+#define AUXCLK_CLKDIV_MASK		(0xF << 16)
+
+#define AUXCLK_SRCSELECT_SYS_CLK	0
+#define AUXCLK_SRCSELECT_CORE_DPLL	1
+#define AUXCLK_SRCSELECT_PER_DPLL	2
+#define AUXCLK_SRCSELECT_ALTERNATE	3
+
+#endif /* _CLOCKS_OMAP5_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/cpu.h
new file mode 100644
index 000000000..9e5655319
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/cpu.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2010
+ * Texas Instruments, <www.ti.com>
+ *
+ *	Aneesh V <aneesh@ti.com>
+ */
+
+#ifndef _CPU_H
+#define _CPU_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#include <asm/arch/hardware.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+#include <asm/ti-common/omap_wdt.h>
+
+struct gptimer {
+	u32 tidr;		/* 0x00 r */
+	u8 res1[0xc];
+	u32 tiocp_cfg;		/* 0x10 rw */
+	u8 res2[0x10];
+	u32 tisr_raw;		/* 0x24 r */
+	u32 tisr;		/* 0x28 rw */
+	u32 tier;		/* 0x2c rw */
+	u32 ticr;		/* 0x30 rw */
+	u32 twer;		/* 0x34 rw */
+	u32 tclr;		/* 0x38 rw */
+	u32 tcrr;		/* 0x3c rw */
+	u32 tldr;		/* 0x40 rw */
+	u32 ttgr;		/* 0x44 rw */
+	u32 twpc;		/* 0x48 r */
+	u32 tmar;		/* 0x4c rw */
+	u32 tcar1;		/* 0x50 r */
+	u32 tcicr;		/* 0x54 rw */
+	u32 tcar2;		/* 0x58 r */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* enable sys_clk NO-prescale /1 */
+#define GPT_EN			((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
+
+#define WDT_BASE                (OMAP54XX_L4_WKUP_BASE + 0x14000)
+/* Watchdog */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct watchdog {
+	u8 res1[0x34];
+	u32 wwps;		/* 0x34 r */
+	u8 res2[0x10];
+	u32 wspr;		/* 0x48 rw */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/* I2C base */
+#define I2C_BASE1		(OMAP54XX_L4_PER_BASE + 0x70000)
+#define I2C_BASE2		(OMAP54XX_L4_PER_BASE + 0x72000)
+#define I2C_BASE3		(OMAP54XX_L4_PER_BASE + 0x60000)
+#define I2C_BASE4		(OMAP54XX_L4_PER_BASE + 0x7A000)
+#define I2C_BASE5		(OMAP54XX_L4_PER_BASE + 0x7C000)
+
+/* MUSB base */
+#define MUSB_BASE		(OMAP54XX_L4_CORE_BASE + 0xAB000)
+
+/* OMAP4 GPIO registers */
+#define OMAP_GPIO_REVISION		0x0000
+#define OMAP_GPIO_SYSCONFIG		0x0010
+#define OMAP_GPIO_SYSSTATUS		0x0114
+#define OMAP_GPIO_IRQSTATUS1		0x0118
+#define OMAP_GPIO_IRQSTATUS2		0x0128
+#define OMAP_GPIO_IRQENABLE2		0x012c
+#define OMAP_GPIO_IRQENABLE1		0x011c
+#define OMAP_GPIO_WAKE_EN		0x0120
+#define OMAP_GPIO_CTRL			0x0130
+#define OMAP_GPIO_OE			0x0134
+#define OMAP_GPIO_DATAIN		0x0138
+#define OMAP_GPIO_DATAOUT		0x013c
+#define OMAP_GPIO_LEVELDETECT0		0x0140
+#define OMAP_GPIO_LEVELDETECT1		0x0144
+#define OMAP_GPIO_RISINGDETECT		0x0148
+#define OMAP_GPIO_FALLINGDETECT		0x014c
+#define OMAP_GPIO_DEBOUNCE_EN		0x0150
+#define OMAP_GPIO_DEBOUNCE_VAL		0x0154
+#define OMAP_GPIO_CLEARIRQENABLE1	0x0160
+#define OMAP_GPIO_SETIRQENABLE1		0x0164
+#define OMAP_GPIO_CLEARWKUENA		0x0180
+#define OMAP_GPIO_SETWKUENA		0x0184
+#define OMAP_GPIO_CLEARDATAOUT		0x0190
+#define OMAP_GPIO_SETDATAOUT		0x0194
+
+/*
+ * PRCM
+ */
+
+/* PRM */
+#define PRM_BASE		0x4AE06000
+#define PRM_DEVICE_BASE		(PRM_BASE + 0x1B00)
+
+#define PRM_RSTCTRL		PRM_DEVICE_BASE
+#define PRM_RSTCTRL_RESET	0x01
+#define PRM_RSTST		(PRM_DEVICE_BASE + 0x4)
+#define PRM_RSTST_WARM_RESET_MASK	0x7FEA
+
+/* DRA7XX CPSW Config space */
+#define CPSW_BASE			0x48484000
+#define CPSW_MDIO_BASE			0x48485000
+
+/* gmii_sel register defines */
+#define GMII1_SEL_MII		0x0
+#define GMII1_SEL_RMII		0x1
+#define GMII1_SEL_RGMII		0x2
+#define GMII2_SEL_MII		(GMII1_SEL_MII << 4)
+#define GMII2_SEL_RMII		(GMII1_SEL_RMII << 4)
+#define GMII2_SEL_RGMII		(GMII1_SEL_RGMII << 4)
+
+#define MII_MODE_ENABLE		(GMII1_SEL_MII | GMII2_SEL_MII)
+#define RMII_MODE_ENABLE        (GMII1_SEL_RMII | GMII2_SEL_RMII)
+#define RGMII_MODE_ENABLE	(GMII1_SEL_RGMII | GMII2_SEL_RGMII)
+
+#endif /* _CPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
new file mode 100644
index 000000000..ea2f113f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015
+ * Texas Instruments Incorporated
+ *
+ * Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#ifndef _DRA7_IODELAY_H_
+#define _DRA7_IODELAY_H_
+
+#include <asm/arch/sys_proto.h>
+
+/* CONFIG_REG_0 */
+#define CFG_REG_0_OFFSET		0xC
+#define CFG_REG_ROM_READ_SHIFT		1
+#define CFG_REG_ROM_READ_MASK		(1 << 1)
+#define CFG_REG_CALIB_STRT_SHIFT	0
+#define CFG_REG_CALIB_STRT_MASK		(1 << 0)
+#define CFG_REG_CALIB_STRT		1
+#define CFG_REG_CALIB_END		0
+#define CFG_REG_ROM_READ_START		(1 << 1)
+#define CFG_REG_ROM_READ_END		(0 << 1)
+
+/* CONFIG_REG_2 */
+#define CFG_REG_2_OFFSET		0x14
+#define CFG_REG_REFCLK_PERIOD_SHIFT	0
+#define CFG_REG_REFCLK_PERIOD_MASK	(0xFFFF << 0)
+#define CFG_REG_REFCLK_PERIOD		0x2EF
+
+/* CONFIG_REG_8 */
+#define CFG_REG_8_OFFSET		0x2C
+#define CFG_IODELAY_UNLOCK_KEY		0x0000AAAA
+#define CFG_IODELAY_LOCK_KEY		0x0000AAAB
+
+/* CONFIG_REG_3/4 */
+#define CFG_REG_3_OFFSET	0x18
+#define CFG_REG_4_OFFSET	0x1C
+#define CFG_REG_DLY_CNT_SHIFT	16
+#define CFG_REG_DLY_CNT_MASK	(0xFFFF << 16)
+#define CFG_REG_REF_CNT_SHIFT	0
+#define CFG_REG_REF_CNT_MASK	(0xFFFF << 0)
+
+/* CTRL_CORE_SMA_SW_0 */
+#define CTRL_ISOLATE_SHIFT		2
+#define CTRL_ISOLATE_MASK		(1 << 2)
+#define ISOLATE_IO			1
+#define DEISOLATE_IO			0
+
+/* CTRL_CORE_SMA_SW_1 */
+#define RGMII2_ID_MODE_N_MASK		(1 << 26)
+#define RGMII1_ID_MODE_N_MASK		(1 << 25)
+
+/* PRM_IO_PMCTRL */
+#define PMCTRL_ISOCLK_OVERRIDE_SHIFT	0
+#define PMCTRL_ISOCLK_OVERRIDE_MASK	(1 << 0)
+#define PMCTRL_ISOCLK_STATUS_SHIFT	1
+#define PMCTRL_ISOCLK_STATUS_MASK	(1 << 1)
+#define PMCTRL_ISOCLK_OVERRIDE_CTRL	1
+#define PMCTRL_ISOCLK_NOT_OVERRIDE_CTRL	0
+
+#define ERR_CALIBRATE_IODELAY		0x1
+#define ERR_DEISOLATE_IO		0x2
+#define ERR_ISOLATE_IO			0x4
+#define ERR_UPDATE_DELAY		0x8
+#define ERR_CPDE			0x3
+#define ERR_FPDE			0x5
+
+/* CFG_XXX */
+#define CFG_X_SIGNATURE_SHIFT		12
+#define CFG_X_SIGNATURE_MASK		(0x3F << 12)
+#define CFG_X_LOCK_SHIFT		10
+#define CFG_X_LOCK_MASK			(0x1 << 10)
+#define CFG_X_COARSE_DLY_SHIFT		5
+#define CFG_X_COARSE_DLY_MASK		(0x1F << 5)
+#define CFG_X_FINE_DLY_SHIFT		0
+#define CFG_X_FINE_DLY_MASK		(0x1F << 0)
+#define CFG_X_SIGNATURE			0x29
+#define CFG_X_LOCK			1
+
+void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+			   struct iodelay_cfg_entry const *iodelay,
+			   int niodelays);
+void late_recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+			      struct iodelay_cfg_entry const *iodelay,
+			      int niodelays);
+int __recalibrate_iodelay_start(void);
+void __recalibrate_iodelay_end(int ret);
+
+int do_set_iodelay(u32 base, struct iodelay_cfg_entry const *array,
+		   int niodelays);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/ehci.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/ehci.h
new file mode 100644
index 000000000..1790b92a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/ehci.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com*
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ */
+
+#ifndef _EHCI_H
+#define _EHCI_H
+
+#define OMAP_EHCI_BASE				(OMAP54XX_L4_CORE_BASE + 0x64C00)
+#define OMAP_UHH_BASE				(OMAP54XX_L4_CORE_BASE + 0x64000)
+#define OMAP_USBTLL_BASE			(OMAP54XX_L4_CORE_BASE + 0x62000)
+
+/* TLL Register Set */
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE		(1 << 3)
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP		(1 << 2)
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET		(1 << 1)
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY		(1 << 8)
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE		1
+
+#define OMAP_UHH_SYSCONFIG_SOFTRESET		1
+#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE	(1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOIDLE		(1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOSTDBY		(1 << 4)
+
+#define OMAP_UHH_SYSCONFIG_VAL	(OMAP_UHH_SYSCONFIG_NOIDLE | \
+					OMAP_UHH_SYSCONFIG_NOSTDBY)
+
+#endif /* _EHCI_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/gpio.h
new file mode 100644
index 000000000..1e44fb5ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/gpio.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This work is derived from the linux 2.6.27 kernel source
+ * To fetch, use the kernel repository
+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ * Use the v2.6.27 tag.
+ *
+ * Below is the original's header including its copyright
+ *
+ *  linux/arch/arm/plat-omap/gpio.c
+ *
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+#ifndef _GPIO_OMAP5_H
+#define _GPIO_OMAP5_H
+
+#include <asm/omap_gpio.h>
+
+#define OMAP_MAX_GPIO			256
+
+#define OMAP54XX_GPIO1_BASE		0x4Ae10000
+#define OMAP54XX_GPIO2_BASE		0x48055000
+#define OMAP54XX_GPIO3_BASE		0x48057000
+#define OMAP54XX_GPIO4_BASE		0x48059000
+#define OMAP54XX_GPIO5_BASE		0x4805B000
+#define OMAP54XX_GPIO6_BASE		0x4805D000
+#define OMAP54XX_GPIO7_BASE		0x48051000
+#define OMAP54XX_GPIO8_BASE		0x48053000
+
+
+/* Get the GPIO index from the given bank number and bank gpio */
+#define GPIO_TO_PIN(bank, bank_gpio)	(32 * (bank - 1) + (bank_gpio))
+
+#endif /* _GPIO_OMAP5_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/hardware.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/hardware.h
new file mode 100644
index 000000000..b6d26e9f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/hardware.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * hardware.h
+ *
+ * hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef __OMAP_HARDWARE_H
+#define __OMAP_HARDWARE_H
+
+#include <asm/arch/omap.h>
+
+/*
+ * Common hardware definitions
+ */
+
+/* BCH Error Location Module */
+#define ELM_BASE			0x48078000
+
+/* GPMC Base address */
+#define GPMC_BASE			0x50000000
+
+/* EDMA3 Base address for DRA7XX and AM57XX */
+#if defined(CONFIG_DRA7XX)
+#define EDMA3_BASE			0x43300000
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/i2c.h
new file mode 100644
index 000000000..9e1edcf2b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/i2c.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2004-2010
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef _OMAP5_I2C_H_
+#define _OMAP5_I2C_H_
+
+#define I2C_DEFAULT_BASE	I2C_BASE1
+
+#endif /* _OMAP5_I2C_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/mem.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/mem.h
new file mode 100644
index 000000000..bd72fb611
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/mem.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author
+ *		Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * Initial Code from:
+ *		Richard Woodruff <r-woodruff2@ti.com>
+ */
+
+#ifndef _MEM_H_
+#define _MEM_H_
+
+/*
+ * GPMC settings -
+ * Definitions is as per the following format
+ * #define <PART>_GPMC_CONFIG<x> <value>
+ * Where:
+ * PART is the part name e.g. STNOR - Intel Strata Flash
+ * x is GPMC config registers from 1 to 6 (there will be 6 macros)
+ * Value is corresponding value
+ *
+ * For every valid PRCM configuration there should be only one definition of
+ * the same. if values are independent of the board, this definition will be
+ * present in this file if values are dependent on the board, then this should
+ * go into corresponding mem-boardName.h file
+ *
+ * Currently valid part Names are (PART):
+ * M_NAND - Micron NAND
+ * STNOR - STMicrolelctronics M29W128GL
+ */
+#define GPMC_SIZE_256M		0x0
+#define GPMC_SIZE_128M		0x8
+#define GPMC_SIZE_64M		0xC
+#define GPMC_SIZE_32M		0xE
+#define GPMC_SIZE_16M		0xF
+
+#define M_NAND_GPMC_CONFIG1	0x00000800
+#define M_NAND_GPMC_CONFIG2	0x001e1e00
+#define M_NAND_GPMC_CONFIG3	0x001e1e00
+#define M_NAND_GPMC_CONFIG4	0x16051807
+#define M_NAND_GPMC_CONFIG5	0x00151e1e
+#define M_NAND_GPMC_CONFIG6	0x16000f80
+#define M_NAND_GPMC_CONFIG7	0x00000008
+
+#define STNOR_GPMC_CONFIG1	0x00001000
+#define STNOR_GPMC_CONFIG2	0x001f1f00
+#define STNOR_GPMC_CONFIG3	0x001f1f01
+#define STNOR_GPMC_CONFIG4	0x1f011f01
+#define STNOR_GPMC_CONFIG5	0x001d1f1f
+#define STNOR_GPMC_CONFIG6	0x08070280
+#define STNOR_GPMC_CONFIG7	0x00000048
+
+/* max number of GPMC Chip Selects */
+#define GPMC_MAX_CS		8
+/* max number of GPMC regs */
+#define GPMC_MAX_REG		7
+
+#endif /* endif _MEM_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/mmc_host_def.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/mmc_host_def.h
new file mode 100644
index 000000000..d06779956
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/mmc_host_def.h
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MMC_HOST_DEF_H
+#define MMC_HOST_DEF_H
+
+#include <asm/omap_mmc.h>
+
+/*
+ * OMAP HSMMC register definitions
+ */
+
+#define OMAP_HSMMC1_BASE	0x4809C000
+#define OMAP_HSMMC2_BASE	0x480B4000
+#define OMAP_HSMMC3_BASE	0x480AD000
+
+#endif /* MMC_HOST_DEF_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
new file mode 100644
index 000000000..c7c118ec2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
@@ -0,0 +1,356 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated
+ *
+ * Nishant Kamat <nskamat@ti.com>
+ * Lokesh Vutla <lokeshvutla@ti.com>
+ */
+#ifndef _MUX_DRA7XX_H_
+#define _MUX_DRA7XX_H_
+
+#include <asm/types.h>
+
+#define PULL_ENA		(0 << 16)
+#define PULL_DIS		(1 << 16)
+#define PULL_UP			(1 << 17)
+#define INPUT_EN		(1 << 18)
+#define SLEWCONTROL		(1 << 19)
+
+/* Active pin states */
+#define PIN_OUTPUT		(0 | PULL_DIS)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(0)
+#define PIN_INPUT		(INPUT_EN | PULL_DIS)
+#define PIN_INPUT_SLEW		(INPUT_EN | SLEWCONTROL)
+#define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
+
+#define M0	0
+#define M1	1
+#define M2	2
+#define M3	3
+#define M4	4
+#define M5	5
+#define M6	6
+#define M7	7
+#define M8	8
+#define M9	9
+#define M10	10
+#define M11	11
+#define M12	12
+#define M13	13
+#define M14	14
+#define M15	15
+
+#define MODE_SELECT		(1 << 8)
+#define DELAYMODE_SHIFT		4
+
+#define MANUAL_MODE	MODE_SELECT
+
+#define VIRTUAL_MODE0	(MODE_SELECT | (0x0 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE1	(MODE_SELECT | (0x1 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE2	(MODE_SELECT | (0x2 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE3	(MODE_SELECT | (0x3 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE4	(MODE_SELECT | (0x4 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE5	(MODE_SELECT | (0x5 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE6	(MODE_SELECT | (0x6 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE7	(MODE_SELECT | (0x7 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE8	(MODE_SELECT | (0x8 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE9	(MODE_SELECT | (0x9 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE10	(MODE_SELECT | (0xa << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE11	(MODE_SELECT | (0xb << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE12	(MODE_SELECT | (0xc << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE13	(MODE_SELECT | (0xd << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE14	(MODE_SELECT | (0xe << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE15	(MODE_SELECT | (0xf << DELAYMODE_SHIFT))
+
+#define SAFE_MODE	M15
+
+#define GPMC_AD0	0x000
+#define GPMC_AD1	0x004
+#define GPMC_AD2	0x008
+#define GPMC_AD3	0x00C
+#define GPMC_AD4	0x010
+#define GPMC_AD5	0x014
+#define GPMC_AD6	0x018
+#define GPMC_AD7	0x01C
+#define GPMC_AD8	0x020
+#define GPMC_AD9	0x024
+#define GPMC_AD10	0x028
+#define GPMC_AD11	0x02C
+#define GPMC_AD12	0x030
+#define GPMC_AD13	0x034
+#define GPMC_AD14	0x038
+#define GPMC_AD15	0x03C
+#define GPMC_A0		0x040
+#define GPMC_A1		0x044
+#define GPMC_A2		0x048
+#define GPMC_A3		0x04C
+#define GPMC_A4		0x050
+#define GPMC_A5		0x054
+#define GPMC_A6		0x058
+#define GPMC_A7		0x05C
+#define GPMC_A8		0x060
+#define GPMC_A9		0x064
+#define GPMC_A10	0x068
+#define GPMC_A11	0x06C
+#define GPMC_A12	0x070
+#define GPMC_A13	0x074
+#define GPMC_A14	0x078
+#define GPMC_A15	0x07C
+#define GPMC_A16	0x080
+#define GPMC_A17	0x084
+#define GPMC_A18	0x088
+#define GPMC_A19	0x08C
+#define GPMC_A20	0x090
+#define GPMC_A21	0x094
+#define GPMC_A22	0x098
+#define GPMC_A23	0x09C
+#define GPMC_A24	0x0A0
+#define GPMC_A25	0x0A4
+#define GPMC_A26	0x0A8
+#define GPMC_A27	0x0AC
+#define GPMC_CS1	0x0B0
+#define GPMC_CS0	0x0B4
+#define GPMC_CS2	0x0B8
+#define GPMC_CS3	0x0BC
+#define GPMC_CLK	0x0C0
+#define GPMC_ADVN_ALE	0x0C4
+#define GPMC_OEN_REN	0x0C8
+#define GPMC_WEN	0x0CC
+#define GPMC_BEN0	0x0D0
+#define GPMC_BEN1	0x0D4
+#define GPMC_WAIT0	0x0D8
+#define VIN1A_CLK0	0x0DC
+#define VIN1B_CLK1	0x0E0
+#define VIN1A_DE0	0x0E4
+#define VIN1A_FLD0	0x0E8
+#define VIN1A_HSYNC0	0x0EC
+#define VIN1A_VSYNC0	0x0F0
+#define VIN1A_D0	0x0F4
+#define VIN1A_D1	0x0F8
+#define VIN1A_D2	0x0FC
+#define VIN1A_D3	0x100
+#define VIN1A_D4	0x104
+#define VIN1A_D5	0x108
+#define VIN1A_D6	0x10C
+#define VIN1A_D7	0x110
+#define VIN1A_D8	0x114
+#define VIN1A_D9	0x118
+#define VIN1A_D10	0x11C
+#define VIN1A_D11	0x120
+#define VIN1A_D12	0x124
+#define VIN1A_D13	0x128
+#define VIN1A_D14	0x12C
+#define VIN1A_D15	0x130
+#define VIN1A_D16	0x134
+#define VIN1A_D17	0x138
+#define VIN1A_D18	0x13C
+#define VIN1A_D19	0x140
+#define VIN1A_D20	0x144
+#define VIN1A_D21	0x148
+#define VIN1A_D22	0x14C
+#define VIN1A_D23	0x150
+#define VIN2A_CLK0	0x154
+#define VIN2A_DE0	0x158
+#define VIN2A_FLD0	0x15C
+#define VIN2A_HSYNC0	0x160
+#define VIN2A_VSYNC0	0x164
+#define VIN2A_D0	0x168
+#define VIN2A_D1	0x16C
+#define VIN2A_D2	0x170
+#define VIN2A_D3	0x174
+#define VIN2A_D4	0x178
+#define VIN2A_D5	0x17C
+#define VIN2A_D6	0x180
+#define VIN2A_D7	0x184
+#define VIN2A_D8	0x188
+#define VIN2A_D9	0x18C
+#define VIN2A_D10	0x190
+#define VIN2A_D11	0x194
+#define VIN2A_D12	0x198
+#define VIN2A_D13	0x19C
+#define VIN2A_D14	0x1A0
+#define VIN2A_D15	0x1A4
+#define VIN2A_D16	0x1A8
+#define VIN2A_D17	0x1AC
+#define VIN2A_D18	0x1B0
+#define VIN2A_D19	0x1B4
+#define VIN2A_D20	0x1B8
+#define VIN2A_D21	0x1BC
+#define VIN2A_D22	0x1C0
+#define VIN2A_D23	0x1C4
+#define VOUT1_CLK	0x1C8
+#define VOUT1_DE	0x1CC
+#define VOUT1_FLD	0x1D0
+#define VOUT1_HSYNC	0x1D4
+#define VOUT1_VSYNC	0x1D8
+#define VOUT1_D0	0x1DC
+#define VOUT1_D1	0x1E0
+#define VOUT1_D2	0x1E4
+#define VOUT1_D3	0x1E8
+#define VOUT1_D4	0x1EC
+#define VOUT1_D5	0x1F0
+#define VOUT1_D6	0x1F4
+#define VOUT1_D7	0x1F8
+#define VOUT1_D8	0x1FC
+#define VOUT1_D9	0x200
+#define VOUT1_D10	0x204
+#define VOUT1_D11	0x208
+#define VOUT1_D12	0x20C
+#define VOUT1_D13	0x210
+#define VOUT1_D14	0x214
+#define VOUT1_D15	0x218
+#define VOUT1_D16	0x21C
+#define VOUT1_D17	0x220
+#define VOUT1_D18	0x224
+#define VOUT1_D19	0x228
+#define VOUT1_D20	0x22C
+#define VOUT1_D21	0x230
+#define VOUT1_D22	0x234
+#define VOUT1_D23	0x238
+#define MDIO_MCLK	0x23C
+#define MDIO_D		0x240
+#define RMII_MHZ_50_CLK	0x244
+#define UART3_RXD	0x248
+#define UART3_TXD	0x24C
+#define RGMII0_TXC	0x250
+#define RGMII0_TXCTL	0x254
+#define RGMII0_TXD3	0x258
+#define RGMII0_TXD2	0x25C
+#define RGMII0_TXD1	0x260
+#define RGMII0_TXD0	0x264
+#define RGMII0_RXC	0x268
+#define RGMII0_RXCTL	0x26C
+#define RGMII0_RXD3	0x270
+#define RGMII0_RXD2	0x274
+#define RGMII0_RXD1	0x278
+#define RGMII0_RXD0	0x27C
+#define USB1_DRVVBUS	0x280
+#define USB2_DRVVBUS	0x284
+#define GPIO6_14	0x288
+#define GPIO6_15	0x28C
+#define GPIO6_16	0x290
+#define XREF_CLK0	0x294
+#define XREF_CLK1	0x298
+#define XREF_CLK2	0x29C
+#define XREF_CLK3	0x2A0
+#define MCASP1_ACLKX	0x2A4
+#define MCASP1_FSX	0x2A8
+#define MCASP1_ACLKR	0x2AC
+#define MCASP1_FSR	0x2B0
+#define MCASP1_AXR0	0x2B4
+#define MCASP1_AXR1	0x2B8
+#define MCASP1_AXR2	0x2BC
+#define MCASP1_AXR3	0x2C0
+#define MCASP1_AXR4	0x2C4
+#define MCASP1_AXR5	0x2C8
+#define MCASP1_AXR6	0x2CC
+#define MCASP1_AXR7	0x2D0
+#define MCASP1_AXR8	0x2D4
+#define MCASP1_AXR9	0x2D8
+#define MCASP1_AXR10	0x2DC
+#define MCASP1_AXR11	0x2E0
+#define MCASP1_AXR12	0x2E4
+#define MCASP1_AXR13	0x2E8
+#define MCASP1_AXR14	0x2EC
+#define MCASP1_AXR15	0x2F0
+#define MCASP2_ACLKX	0x2F4
+#define MCASP2_FSX	0x2F8
+#define MCASP2_ACLKR	0x2FC
+#define MCASP2_FSR	0x300
+#define MCASP2_AXR0	0x304
+#define MCASP2_AXR1	0x308
+#define MCASP2_AXR2	0x30C
+#define MCASP2_AXR3	0x310
+#define MCASP2_AXR4	0x314
+#define MCASP2_AXR5	0x318
+#define MCASP2_AXR6	0x31C
+#define MCASP2_AXR7	0x320
+#define MCASP3_ACLKX	0x324
+#define MCASP3_FSX	0x328
+#define MCASP3_AXR0	0x32C
+#define MCASP3_AXR1	0x330
+#define MCASP4_ACLKX	0x334
+#define MCASP4_FSX	0x338
+#define MCASP4_AXR0	0x33C
+#define MCASP4_AXR1	0x340
+#define MCASP5_ACLKX	0x344
+#define MCASP5_FSX	0x348
+#define MCASP5_AXR0	0x34C
+#define MCASP5_AXR1	0x350
+#define MMC1_CLK	0x354
+#define MMC1_CMD	0x358
+#define MMC1_DAT0	0x35C
+#define MMC1_DAT1	0x360
+#define MMC1_DAT2	0x364
+#define MMC1_DAT3	0x368
+#define MMC1_SDCD	0x36C
+#define MMC1_SDWP	0x370
+#define GPIO6_10	0x374
+#define GPIO6_11	0x378
+#define MMC3_CLK	0x37C
+#define MMC3_CMD	0x380
+#define MMC3_DAT0	0x384
+#define MMC3_DAT1	0x388
+#define MMC3_DAT2	0x38C
+#define MMC3_DAT3	0x390
+#define MMC3_DAT4	0x394
+#define MMC3_DAT5	0x398
+#define MMC3_DAT6	0x39C
+#define MMC3_DAT7	0x3A0
+#define SPI1_SCLK	0x3A4
+#define SPI1_D1		0x3A8
+#define SPI1_D0		0x3AC
+#define SPI1_CS0	0x3B0
+#define SPI1_CS1	0x3B4
+#define SPI1_CS2	0x3B8
+#define SPI1_CS3	0x3BC
+#define SPI2_SCLK	0x3C0
+#define SPI2_D1		0x3C4
+#define SPI2_D0		0x3C8
+#define SPI2_CS0	0x3CC
+#define DCAN1_TX	0x3D0
+#define DCAN1_RX	0x3D4
+#define DCAN2_TX	0x3D8
+#define DCAN2_RX	0x3DC
+#define UART1_RXD	0x3E0
+#define UART1_TXD	0x3E4
+#define UART1_CTSN	0x3E8
+#define UART1_RTSN	0x3EC
+#define UART2_RXD	0x3F0
+#define UART2_TXD	0x3F4
+#define UART2_CTSN	0x3F8
+#define UART2_RTSN	0x3FC
+#define I2C1_SDA	0x400
+#define I2C1_SCL	0x404
+#define I2C2_SDA	0x408
+#define I2C2_SCL	0x40C
+#define I2C3_SDA	0x410
+#define I2C3_SCL	0x414
+#define WAKEUP0		0x418
+#define WAKEUP1		0x41C
+#define WAKEUP2		0x420
+#define WAKEUP3		0x424
+#define ON_OFF		0x428
+#define RTC_PORZ	0x42C
+#define TMS		0x430
+#define TDI		0x434
+#define TDO		0x438
+#define TCLK		0x43C
+#define TRSTN		0x440
+#define RTCK		0x444
+#define EMU0		0x448
+#define EMU1		0x44C
+#define EMU2		0x450
+#define EMU3		0x454
+#define EMU4		0x458
+#define RESETN		0x45C
+#define NMIN_DSP	0x460
+#define RSTOUTN		0x464
+
+#define MCAN_SEL_ALT_MASK	0x6000
+#define MCAN_SEL		0x2000
+
+#endif /* _MUX_DRA7XX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/mux_omap5.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/mux_omap5.h
new file mode 100644
index 000000000..2460646e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/mux_omap5.h
@@ -0,0 +1,317 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated
+ * Richard Woodruff		<r-woodruff2@ti.com>
+ * Aneesh V			<aneesh@ti.com>
+ * Balaji Krishnamoorthy	<balajitk@ti.com>
+ */
+#ifndef _MUX_OMAP5_H_
+#define _MUX_OMAP5_H_
+
+#include <asm/types.h>
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_PD          (1 << 12)
+#define OFF_PU          (3 << 12)
+#define OFF_OUT_PTD     (0 << 10)
+#define OFF_OUT_PTU     (2 << 10)
+#define OFF_IN          (1 << 10)
+#define OFF_OUT         (0 << 10)
+#define OFF_EN          (1 << 9)
+#else
+#define OFF_PD          (0 << 12)
+#define OFF_PU          (0 << 12)
+#define OFF_OUT_PTD     (0 << 10)
+#define OFF_OUT_PTU     (0 << 10)
+#define OFF_IN          (0 << 10)
+#define OFF_OUT         (0 << 10)
+#define OFF_EN          (0 << 9)
+#endif
+
+#define IEN             (1 << 8)
+#define IDIS            (0 << 8)
+#define PTU             (3 << 3)
+#define PTD             (1 << 3)
+#define EN              (1 << 3)
+#define DIS             (0 << 3)
+
+#define M0              0
+#define M1              1
+#define M2              2
+#define M3              3
+#define M4              4
+#define M5              5
+#define M6              6
+#define M7              7
+
+#define SAFE_MODE	M7
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_IN_PD       (OFF_PD | OFF_IN | OFF_EN)
+#define OFF_IN_PU       (OFF_PU | OFF_IN | OFF_EN)
+#define OFF_OUT_PD      (OFF_OUT_PTD | OFF_OUT | OFF_EN)
+#define OFF_OUT_PU      (OFF_OUT_PTU | OFF_OUT | OFF_EN)
+#else
+#define OFF_IN_PD       0
+#define OFF_IN_PU       0
+#define OFF_OUT_PD      0
+#define OFF_OUT_PU      0
+#endif
+
+#define CORE_REVISION		0x0000
+#define CORE_HWINFO		0x0004
+#define CORE_SYSCONFIG		0x0010
+#define EMMC_CLK		0x0040
+#define EMMC_CMD		0x0042
+#define EMMC_DATA0		0x0044
+#define EMMC_DATA1		0x0046
+#define EMMC_DATA2		0x0048
+#define EMMC_DATA3		0x004a
+#define EMMC_DATA4		0x004c
+#define EMMC_DATA5		0x004e
+#define EMMC_DATA6		0x0050
+#define EMMC_DATA7		0x0052
+#define C2C_CLKOUT0		0x0054
+#define C2C_CLKOUT1		0x0056
+#define C2C_CLKIN0		0x0058
+#define C2C_CLKIN1		0x005a
+#define C2C_DATAIN0		0x005c
+#define C2C_DATAIN1		0x005e
+#define C2C_DATAIN2		0x0060
+#define C2C_DATAIN3		0x0062
+#define C2C_DATAIN4		0x0064
+#define C2C_DATAIN5		0x0066
+#define C2C_DATAIN6		0x0068
+#define C2C_DATAIN7		0x006a
+#define C2C_DATAOUT0		0x006c
+#define C2C_DATAOUT1		0x006e
+#define C2C_DATAOUT2		0x0070
+#define C2C_DATAOUT3		0x0072
+#define C2C_DATAOUT4		0x0074
+#define C2C_DATAOUT5		0x0076
+#define C2C_DATAOUT6		0x0078
+#define C2C_DATAOUT7		0x007a
+#define C2C_DATA8		0x007c
+#define C2C_DATA9		0x007e
+#define C2C_DATA10		0x0080
+#define C2C_DATA11		0x0082
+#define C2C_DATA12		0x0084
+#define C2C_DATA13		0x0086
+#define C2C_DATA14		0x0088
+#define C2C_DATA15		0x008a
+#define LLIA_WAKEREQOUT		0x008c
+#define LLIB_WAKEREQOUT		0x008e
+#define HSI1_ACREADY		0x0090
+#define HSI1_CAREADY		0x0092
+#define HSI1_ACWAKE		0x0094
+#define HSI1_CAWAKE		0x0096
+#define HSI1_ACFLAG		0x0098
+#define HSI1_ACDATA		0x009a
+#define HSI1_CAFLAG		0x009c
+#define HSI1_CADATA		0x009e
+#define UART1_TX		0x00a0
+#define UART1_CTS		0x00a2
+#define UART1_RX		0x00a4
+#define UART1_RTS		0x00a6
+#define HSI2_CAREADY		0x00a8
+#define HSI2_ACREADY		0x00aa
+#define HSI2_CAWAKE		0x00ac
+#define HSI2_ACWAKE		0x00ae
+#define HSI2_CAFLAG		0x00b0
+#define HSI2_CADATA		0x00b2
+#define HSI2_ACFLAG		0x00b4
+#define HSI2_ACDATA		0x00b6
+#define UART2_RTS		0x00b8
+#define UART2_CTS		0x00ba
+#define UART2_RX		0x00bc
+#define UART2_TX		0x00be
+#define USBB1_HSIC_STROBE	0x00c0
+#define USBB1_HSIC_DATA		0x00c2
+#define USBB2_HSIC_STROBE	0x00c4
+#define USBB2_HSIC_DATA		0x00c6
+#define TIMER10_PWM_EVT		0x00c8
+#define DSIPORTA_TE0		0x00ca
+#define DSIPORTA_LANE0X		0x00cc
+#define DSIPORTA_LANE0Y		0x00ce
+#define DSIPORTA_LANE1X		0x00d0
+#define DSIPORTA_LANE1Y		0x00d2
+#define DSIPORTA_LANE2X		0x00d4
+#define DSIPORTA_LANE2Y		0x00d6
+#define DSIPORTA_LANE3X		0x00d8
+#define DSIPORTA_LANE3Y		0x00da
+#define DSIPORTA_LANE4X		0x00dc
+#define DSIPORTA_LANE4Y		0x00de
+#define DSIPORTC_LANE0X		0x00e0
+#define DSIPORTC_LANE0Y		0x00e2
+#define DSIPORTC_LANE1X		0x00e4
+#define DSIPORTC_LANE1Y		0x00e6
+#define DSIPORTC_LANE2X		0x00e8
+#define DSIPORTC_LANE2Y		0x00ea
+#define DSIPORTC_LANE3X		0x00ec
+#define DSIPORTC_LANE3Y		0x00ee
+#define DSIPORTC_LANE4X		0x00f0
+#define DSIPORTC_LANE4Y		0x00f2
+#define DSIPORTC_TE0		0x00f4
+#define TIMER9_PWM_EVT		0x00f6
+#define I2C4_SCL		0x00f8
+#define I2C4_SDA		0x00fa
+#define MCSPI2_CLK		0x00fc
+#define MCSPI2_SIMO		0x00fe
+#define MCSPI2_SOMI		0x0100
+#define MCSPI2_CS0		0x0102
+#define RFBI_DATA15		0x0104
+#define RFBI_DATA14		0x0106
+#define RFBI_DATA13		0x0108
+#define RFBI_DATA12		0x010a
+#define RFBI_DATA11		0x010c
+#define RFBI_DATA10		0x010e
+#define RFBI_DATA9		0x0110
+#define RFBI_DATA8		0x0112
+#define RFBI_DATA7		0x0114
+#define RFBI_DATA6		0x0116
+#define RFBI_DATA5		0x0118
+#define RFBI_DATA4		0x011a
+#define RFBI_DATA3		0x011c
+#define RFBI_DATA2		0x011e
+#define RFBI_DATA1		0x0120
+#define RFBI_DATA0		0x0122
+#define RFBI_WE			0x0124
+#define RFBI_CS0		0x0126
+#define RFBI_A0			0x0128
+#define RFBI_RE			0x012a
+#define RFBI_HSYNC0		0x012c
+#define RFBI_TE_VSYNC0		0x012e
+#define GPIO6_182		0x0130
+#define GPIO6_183		0x0132
+#define GPIO6_184		0x0134
+#define GPIO6_185		0x0136
+#define GPIO6_186		0x0138
+#define GPIO6_187		0x013a
+#define HDMI_CEC		0x013c
+#define HDMI_HPD		0x013e
+#define HDMI_DDC_SCL		0x0140
+#define HDMI_DDC_SDA		0x0142
+#define CSIPORTC_LANE0X		0x0144
+#define CSIPORTC_LANE0Y		0x0146
+#define CSIPORTC_LANE1X		0x0148
+#define CSIPORTC_LANE1Y		0x014a
+#define CSIPORTB_LANE0X		0x014c
+#define CSIPORTB_LANE0Y		0x014e
+#define CSIPORTB_LANE1X		0x0150
+#define CSIPORTB_LANE1Y		0x0152
+#define CSIPORTB_LANE2X		0x0154
+#define CSIPORTB_LANE2Y		0x0156
+#define CSIPORTA_LANE0X		0x0158
+#define CSIPORTA_LANE0Y		0x015a
+#define CSIPORTA_LANE1X		0x015c
+#define CSIPORTA_LANE1Y		0x015e
+#define CSIPORTA_LANE2X		0x0160
+#define CSIPORTA_LANE2Y		0x0162
+#define CSIPORTA_LANE3X		0x0164
+#define CSIPORTA_LANE3Y		0x0166
+#define CSIPORTA_LANE4X		0x0168
+#define CSIPORTA_LANE4Y		0x016a
+#define CAM_SHUTTER		0x016c
+#define CAM_STROBE		0x016e
+#define CAM_GLOBALRESET		0x0170
+#define TIMER11_PWM_EVT		0x0172
+#define TIMER5_PWM_EVT		0x0174
+#define TIMER6_PWM_EVT		0x0176
+#define TIMER8_PWM_EVT		0x0178
+#define I2C3_SCL		0x017a
+#define I2C3_SDA		0x017c
+#define GPIO8_233		0x017e
+#define GPIO8_234		0x0180
+#define ABE_CLKS		0x0182
+#define ABEDMIC_DIN1		0x0184
+#define ABEDMIC_DIN2		0x0186
+#define ABEDMIC_DIN3		0x0188
+#define ABEDMIC_CLK1		0x018a
+#define ABEDMIC_CLK2		0x018c
+#define ABEDMIC_CLK3		0x018e
+#define ABESLIMBUS1_CLOCK	0x0190
+#define ABESLIMBUS1_DATA	0x0192
+#define ABEMCBSP2_DR		0x0194
+#define ABEMCBSP2_DX		0x0196
+#define ABEMCBSP2_FSX		0x0198
+#define ABEMCBSP2_CLKX		0x019a
+#define ABEMCPDM_UL_DATA	0x019c
+#define ABEMCPDM_DL_DATA	0x019e
+#define ABEMCPDM_FRAME		0x01a0
+#define ABEMCPDM_LB_CLK		0x01a2
+#define WLSDIO_CLK		0x01a4
+#define WLSDIO_CMD		0x01a6
+#define WLSDIO_DATA0		0x01a8
+#define WLSDIO_DATA1		0x01aa
+#define WLSDIO_DATA2		0x01ac
+#define WLSDIO_DATA3		0x01ae
+#define UART5_RX		0x01b0
+#define UART5_TX		0x01b2
+#define UART5_CTS		0x01b4
+#define UART5_RTS		0x01b6
+#define I2C2_SCL		0x01b8
+#define I2C2_SDA		0x01ba
+#define MCSPI1_CLK		0x01bc
+#define MCSPI1_SOMI		0x01be
+#define MCSPI1_SIMO		0x01c0
+#define MCSPI1_CS0		0x01c2
+#define MCSPI1_CS1		0x01c4
+#define I2C5_SCL		0x01c6
+#define I2C5_SDA		0x01c8
+#define PERSLIMBUS2_CLOCK	0x01ca
+#define PERSLIMBUS2_DATA	0x01cc
+#define UART6_TX		0x01ce
+#define UART6_RX		0x01d0
+#define UART6_CTS		0x01d2
+#define UART6_RTS		0x01d4
+#define UART3_CTS_RCTX		0x01d6
+#define UART3_RTS_IRSD		0x01d8
+#define UART3_TX_IRTX		0x01da
+#define UART3_RX_IRRX		0x01dc
+#define USBB3_HSIC_STROBE	0x01de
+#define USBB3_HSIC_DATA		0x01e0
+#define SDCARD_CLK		0x01e2
+#define SDCARD_CMD		0x01e4
+#define SDCARD_DATA2		0x01e6
+#define SDCARD_DATA3		0x01e8
+#define SDCARD_DATA0		0x01ea
+#define SDCARD_DATA1		0x01ec
+#define USBD0_HS_DP		0x01ee
+#define USBD0_HS_DM		0x01f0
+#define I2C1_PMIC_SCL		0x01f2
+#define I2C1_PMIC_SDA		0x01f4
+#define USBD0_SS_RX		0x01f6
+
+#define LLIA_WAKEREQIN		0x0040
+#define LLIB_WAKEREQIN		0x0042
+#define DRM_EMU0		0x0044
+#define DRM_EMU1		0x0046
+#define JTAG_NTRST		0x0048
+#define JTAG_TCK		0x004a
+#define JTAG_RTCK		0x004c
+#define JTAG_TMSC		0x004e
+#define JTAG_TDI		0x0050
+#define JTAG_TDO		0x0052
+#define SYS_32K			0x0054
+#define FREF_CLK_IOREQ		0x0056
+#define FREF_CLK0_OUT		0x0058
+#define FREF_CLK1_OUT		0x005a
+#define FREF_CLK2_OUT		0x005c
+#define FREF_CLK2_REQ		0x005e
+#define FREF_CLK1_REQ		0x0060
+#define SYS_NRESPWRON		0x0062
+#define SYS_NRESWARM		0x0064
+#define SYS_PWR_REQ		0x0066
+#define SYS_NIRQ1		0x0068
+#define SYS_NIRQ2		0x006a
+#define SR_PMIC_SCL		0x006c
+#define SR_PMIC_SDA		0x006e
+#define SYS_BOOT0		0x0070
+#define SYS_BOOT1		0x0072
+#define SYS_BOOT2		0x0074
+#define SYS_BOOT3		0x0076
+#define SYS_BOOT4		0x0078
+#define SYS_BOOT5		0x007a
+
+#endif /* _MUX_OMAP5_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/omap.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/omap.h
new file mode 100644
index 000000000..a9c0421b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/omap.h
@@ -0,0 +1,271 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Authors:
+ *	Aneesh V <aneesh@ti.com>
+ *	Sricharan R <r.sricharan@ti.com>
+ */
+
+#ifndef _OMAP5_H_
+#define _OMAP5_H_
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#include <linux/sizes.h>
+
+/*
+ * L4 Peripherals - L4 Wakeup and L4 Core now
+ */
+#define OMAP54XX_L4_CORE_BASE	0x4A000000
+#define OMAP54XX_L4_WKUP_BASE	0x4Ae00000
+#define OMAP54XX_L4_PER_BASE	0x48000000
+
+/* CONTROL ID CODE */
+#define CONTROL_CORE_ID_CODE	0x4A002204
+#define CONTROL_WKUP_ID_CODE	0x4AE0C204
+
+#if defined(CONFIG_DRA7XX)
+#define CONTROL_ID_CODE		CONTROL_WKUP_ID_CODE
+#else
+#define CONTROL_ID_CODE		CONTROL_CORE_ID_CODE
+#endif
+
+#if defined(CONFIG_DRA7XX)
+#define DRA7_USB_OTG_SS1_BASE		0x48890000
+#define DRA7_USB_OTG_SS1_GLUE_BASE	0x48880000
+#define DRA7_USB3_PHY1_PLL_CTRL		0x4A084C00
+#define DRA7_USB3_PHY1_POWER		0x4A002370
+#define DRA7_USB2_PHY1_POWER		0x4A002300
+
+#define DRA7_USB_OTG_SS2_BASE		0x488D0000
+#define DRA7_USB_OTG_SS2_GLUE_BASE	0x488C0000
+#define DRA7_USB2_PHY2_POWER		0x4A002E74
+#else
+#define OMAP5XX_USB_OTG_SS_BASE		0x4A030000
+#define OMAP5XX_USB_OTG_SS_GLUE_BASE	0x4A020000
+#define OMAP5XX_USB3_PHY_PLL_CTRL	0x4A084C00
+#define OMAP5XX_USB3_PHY_POWER		0x4A002370
+#define OMAP5XX_USB2_PHY_POWER		0x4A002300
+#endif
+
+/* To be verified */
+#define OMAP5430_CONTROL_ID_CODE_ES1_0		0x0B94202F
+#define OMAP5430_CONTROL_ID_CODE_ES2_0          0x1B94202F
+#define OMAP5432_CONTROL_ID_CODE_ES1_0		0x0B99802F
+#define OMAP5432_CONTROL_ID_CODE_ES2_0          0x1B99802F
+#define DRA762_CONTROL_ID_CODE_ES1_0		0x0BB5002F
+#define DRA752_CONTROL_ID_CODE_ES1_0		0x0B99002F
+#define DRA752_CONTROL_ID_CODE_ES1_1		0x1B99002F
+#define DRA752_CONTROL_ID_CODE_ES2_0		0x2B99002F
+#define DRA722_CONTROL_ID_CODE_ES1_0		0x0B9BC02F
+#define DRA722_CONTROL_ID_CODE_ES2_0		0x1B9BC02F
+#define DRA722_CONTROL_ID_CODE_ES2_1		0x2B9BC02F
+
+#define DRA762_ABZ_PACKAGE			0x2
+#define DRA762_ACD_PACKAGE			0x3
+
+/* UART */
+#define UART1_BASE		(OMAP54XX_L4_PER_BASE + 0x6a000)
+#define UART2_BASE		(OMAP54XX_L4_PER_BASE + 0x6c000)
+#define UART3_BASE		(OMAP54XX_L4_PER_BASE + 0x20000)
+#define UART4_BASE		(OMAP54XX_L4_PER_BASE + 0x6e000)
+
+/* General Purpose Timers */
+#define GPT1_BASE		(OMAP54XX_L4_WKUP_BASE + 0x18000)
+#define GPT2_BASE		(OMAP54XX_L4_PER_BASE  + 0x32000)
+#define GPT3_BASE		(OMAP54XX_L4_PER_BASE  + 0x34000)
+
+/* Watchdog Timer2 - MPU watchdog */
+#define WDT2_BASE		(OMAP54XX_L4_WKUP_BASE + 0x14000)
+
+/* QSPI */
+#define QSPI_BASE		0x4B300000
+
+/* SATA */
+#define DWC_AHSATA_BASE		0x4A140000
+
+/*
+ * Hardware Register Details
+ */
+
+/* Watchdog Timer */
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+/* GP Timer */
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/* Control Module */
+#define LDOSRAM_ACTMODE_VSET_IN_MASK	(0x1F << 5)
+#define LDOSRAM_VOLT_CTRL_OVERRIDE	0x0401040f
+#define CONTROL_EFUSE_1_OVERRIDE	0x1C4D0110
+#define CONTROL_EFUSE_2_OVERRIDE	0x00084000
+
+/* LPDDR2 IO regs */
+#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN	0x1C1C1C1C
+#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER	0x9E9E9E9E
+#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN	0x7C7C7C7C
+#define LPDDR2IO_GR10_WD_MASK				(3 << 17)
+#define CONTROL_LPDDR2IO_3_VAL		0xA0888C00
+
+/* CONTROL_EFUSE_2 */
+#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1		0x00ffc000
+
+#define SDCARD_BIAS_PWRDNZ				(1 << 27)
+#define SDCARD_PWRDNZ					(1 << 26)
+#define SDCARD_BIAS_HIZ_MODE				(1 << 25)
+#define SDCARD_PBIASLITE_VMODE				(1 << 21)
+
+#ifndef __ASSEMBLY__
+
+struct s32ktimer {
+	unsigned char res[0x10];
+	unsigned int s32k_cr;	/* 0x10 */
+};
+
+#define DEVICE_TYPE_SHIFT 0x6
+#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
+
+/* Output impedance control */
+#define ds_120_ohm	0x0
+#define ds_60_ohm	0x1
+#define ds_45_ohm	0x2
+#define ds_30_ohm	0x3
+#define ds_mask		0x3
+
+/* Slew rate control */
+#define sc_slow		0x0
+#define sc_medium	0x1
+#define sc_fast		0x2
+#define sc_na		0x3
+#define sc_mask		0x3
+
+/* Target capacitance control */
+#define lb_5_12_pf	0x0
+#define lb_12_25_pf	0x1
+#define lb_25_50_pf	0x2
+#define lb_50_80_pf	0x3
+#define lb_mask		0x3
+
+#define usb_i_mask	0x7
+
+#define DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN   0x80828082
+#define DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN 0x82828200
+#define DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL 0x8421
+#define DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL 0x8421084
+#define DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL 0x8421000
+
+#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL	0x7C7C7C6C
+#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL	0x64646464
+#define DDR_IO_0_VREF_CELLS_DDR3_VALUE				0xBAE8C631
+#define DDR_IO_1_VREF_CELLS_DDR3_VALUE				0xBC6318DC
+#define DDR_IO_2_VREF_CELLS_DDR3_VALUE				0x0
+
+#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C
+#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64646464
+#define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631
+#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xBC6318DC
+#define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000
+
+#define EFUSE_1 0x45145100
+#define EFUSE_2 0x45145100
+#define EFUSE_3 0x45145100
+#define EFUSE_4 0x45145100
+#endif /* __ASSEMBLY__ */
+
+/*
+ * In all cases, the TRM defines the RAM Memory Map for the processor
+ * and indicates the area for the downloaded image.  We use all of that
+ * space for download and once up and running may use other parts of the
+ * map for our needs.  We set a scratch space that is at the end of the
+ * OMAP5 download area, but within the DRA7xx download area (as it is
+ * much larger) and do not, at this time, make use of the additional
+ * space.
+ */
+#if defined(CONFIG_DRA7XX)
+#define NON_SECURE_SRAM_START	0x40300000
+#define NON_SECURE_SRAM_END	0x40380000	/* Not inclusive */
+#define NON_SECURE_SRAM_IMG_END	0x4037C000
+#else
+#define NON_SECURE_SRAM_START	0x40300000
+#define NON_SECURE_SRAM_END	0x40320000	/* Not inclusive */
+#define NON_SECURE_SRAM_IMG_END	0x4031E000
+#endif
+#define SRAM_SCRATCH_SPACE_ADDR	(NON_SECURE_SRAM_IMG_END - SZ_1K)
+
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_ROM_VECT_BASE	0x4031F000
+
+/* CONTROL_SRCOMP_XXX_SIDE */
+#define OVERRIDE_XS_SHIFT		30
+#define OVERRIDE_XS_MASK		(1 << 30)
+#define SRCODE_READ_XS_SHIFT		12
+#define SRCODE_READ_XS_MASK		(0xff << 12)
+#define PWRDWN_XS_SHIFT			11
+#define PWRDWN_XS_MASK			(1 << 11)
+#define DIVIDE_FACTOR_XS_SHIFT		4
+#define DIVIDE_FACTOR_XS_MASK		(0x7f << 4)
+#define MULTIPLY_FACTOR_XS_SHIFT	1
+#define MULTIPLY_FACTOR_XS_MASK		(0x7 << 1)
+#define SRCODE_OVERRIDE_SEL_XS_SHIFT	0
+#define SRCODE_OVERRIDE_SEL_XS_MASK	(1 << 0)
+
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		50
+#define OMAP_ABB_CLOCK_CYCLES		16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK		(0x1 << 7)
+#define OMAP_ABB_MM_TXDONE_MASK			(0x1 << 31)
+#define OMAP_ABB_IVA_TXDONE_MASK		(0x1 << 30)
+#define OMAP_ABB_EVE_TXDONE_MASK		(0x1 << 29)
+#define OMAP_ABB_GPU_TXDONE_MASK		(0x1 << 28)
+
+/* ABB efuse masks */
+#define OMAP5_PROD_ABB_FUSE_VSET_MASK		(0x1F << 20)
+#define OMAP5_PROD_ABB_FUSE_ENABLE_MASK		(0x1 << 25)
+#define DRA7_ABB_FUSE_VSET_MASK			(0x1F << 20)
+#define DRA7_ABB_FUSE_ENABLE_MASK		(0x1 << 25)
+#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK	(0x1 << 10)
+#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK	(0x1f << 0)
+
+#ifndef __ASSEMBLY__
+struct srcomp_params {
+	s8 divide_factor;
+	s8 multiply_factor;
+};
+
+struct ctrl_ioregs {
+	u32 ctrl_ddrch;
+	u32 ctrl_lpddr2ch;
+	u32 ctrl_ddr3ch;
+	u32 ctrl_ddrio_0;
+	u32 ctrl_ddrio_1;
+	u32 ctrl_ddrio_2;
+	u32 ctrl_emif_sdram_config_ext;
+	u32 ctrl_emif_sdram_config_ext_final;
+	u32 ctrl_ddr_ctrl_ext_0;
+};
+
+void clrset_spare_register(u8 spare_type, u32 clear_bits, u32 set_bits);
+
+#endif /* __ASSEMBLY__ */
+
+/* Boot parameters */
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+	unsigned int boot_message;
+	unsigned int boot_device_descriptor;
+	unsigned char boot_device;
+	unsigned char reset_reason;
+	unsigned char ch_flags;
+};
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/sata.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/sata.h
new file mode 100644
index 000000000..96c84fca0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/sata.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SATA Wrapper Register map
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ */
+
+#ifndef _TI_SATA_H
+#define _TI_SATA_H
+
+/* SATA Wrapper module */
+#define TI_SATA_WRAPPER_BASE		(OMAP54XX_L4_CORE_BASE + 0x141100)
+/* SATA PHY Module */
+#define TI_SATA_PLLCTRL_BASE		(OMAP54XX_L4_CORE_BASE + 0x96800)
+
+/* SATA Wrapper register offsets */
+#define TI_SATA_SYSCONFIG			0x00
+#define TI_SATA_CDRLOCK				0x04
+
+/* Register Set */
+#define TI_SATA_SYSCONFIG_OVERRIDE0		(1 << 16)
+#define TI_SATA_SYSCONFIG_STANDBY_MASK		(0x3 << 4)
+#define TI_SATA_SYSCONFIG_IDLE_MASK		(0x3 << 2)
+
+/* Standby modes */
+#define TI_SATA_STANDBY_FORCE			0x0
+#define TI_SATA_STANDBY_NO			(0x1 << 4)
+#define TI_SATA_STANDBY_SMART_WAKE		(0x3 << 4)
+#define TI_SATA_STANDBY_SMART			(0x2 << 4)
+
+/* Idle modes */
+#define TI_SATA_IDLE_FORCE			0x0
+#define TI_SATA_IDLE_NO				(0x1 << 2)
+#define TI_SATA_IDLE_SMART_WAKE			(0x3 << 2)
+#define TI_SATA_IDLE_SMART			(0x2 << 2)
+
+#endif /* _TI_SATA_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/spl.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/spl.h
new file mode 100644
index 000000000..cda3b46f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/spl.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_NONE	0x00
+#define BOOT_DEVICE_XIP		0x01
+#define BOOT_DEVICE_XIPWAIT	0x02
+#define BOOT_DEVICE_NAND	0x03
+#define BOOT_DEVICE_ONENAND	0x04
+#define BOOT_DEVICE_MMC1	0x05
+#define BOOT_DEVICE_MMC2	0x06
+#define BOOT_DEVICE_MMC2_2	0x07
+#define BOOT_DEVICE_SATA	0x09
+#define BOOT_DEVICE_SPI		0x0A
+#define BOOT_DEVICE_QSPI_1	0x0A
+#define BOOT_DEVICE_QSPI_4	0x0B
+#define BOOT_DEVICE_UART	0x43
+#define BOOT_DEVICE_DFU		0x45
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap5/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-omap5/sys_proto.h
new file mode 100644
index 000000000..80b0c93b5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/arch/omap.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/omap_common.h>
+#include <linux/mtd/omap_gpmc.h>
+#include <asm/arch/clock.h>
+#include <asm/ti-common/sys_proto.h>
+
+/*
+ * Structure for Iodelay configuration registers.
+ * Theoretical max for g_delay is 21560 ps.
+ * Theoretical max for a_delay is 1/3rd of g_delay max.
+ * So using u16 for both a/g_delay.
+ */
+struct iodelay_cfg_entry {
+	u16 offset;
+	u16 a_delay;
+	u16 g_delay;
+};
+
+struct pad_conf_entry {
+	u32 offset;
+	u32 val;
+};
+
+struct mmc_platform_fixups {
+	const char *hw_rev;
+	u32 unsupported_caps;
+	u32 max_freq;
+};
+
+struct omap_sysinfo {
+	char *board_string;
+};
+extern const struct omap_sysinfo sysinfo;
+
+void gpmc_init(void);
+void watchdog_init(void);
+u32 get_device_type(void);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs(void);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
+void setup_early_clocks(void);
+void prcm_init(void);
+void do_board_detect(void);
+void vcores_init(void);
+void bypass_dpll(u32 const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap5_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap_sdram_size(void);
+u32 cortex_rev(void);
+void save_omap_boot_params(void);
+void init_omap_revision(void);
+void init_package_revision(void);
+void do_io_settings(void);
+void sri2c_init(void);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
+u32 warm_reset(void);
+void force_emif_self_refresh(void);
+void get_ioregs(const struct ctrl_ioregs **regs);
+void srcomp_enable(void);
+void setup_warmreset_time(void);
+const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr);
+
+static inline u32 div_round_up(u32 num, u32 den)
+{
+	return (num + den - 1)/den;
+}
+
+static inline u32 usec_to_32k(u32 usec)
+{
+	return div_round_up(32768 * usec, 1000000);
+}
+
+#define OMAP5_SERVICE_L2ACTLR_SET    0x104
+#define OMAP5_SERVICE_ACR_SET        0x107
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-orion5x/spl.h b/roms/u-boot/arch/arm/include/asm/arch-orion5x/spl.h
new file mode 100644
index 000000000..dc0a9b909
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-orion5x/spl.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_NOR		1
diff --git a/roms/u-boot/arch/arm/include/asm/arch-owl/regs_s700.h b/roms/u-boot/arch/arm/include/asm/arch-owl/regs_s700.h
new file mode 100644
index 000000000..0f79faec6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-owl/regs_s700.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi S700 Register Definitions
+ *
+ */
+
+#ifndef _OWL_REGS_S700_H_
+#define _OWL_REGS_S700_H_
+
+#define CMU_COREPLL		0x0000
+#define CMU_DEVPLL		0x0004
+#define CMU_DDRPLL		0x0008
+#define CMU_NANDPLL		0x000C
+#define CMU_DISPLAYPLL		0x0010
+#define CMU_AUDIOPLL		0x0014
+#define CMU_TVOUTPLL		0x0018
+#define CMU_BUSCLK		0x001C
+#define CMU_SENSORCLK		0x0020
+#define CMU_LCDCLK		0x0024
+#define CMU_DSIPLLCLK		0x0028
+#define CMU_CSICLK		0x002C
+#define CMU_DECLK		0x0030
+#define CMU_SICLK		0x0034
+#define CMU_BUSCLK1		0x0038
+#define CMU_HDECLK		0x003C
+#define CMU_VDECLK		0x0040
+#define CMU_VCECLK		0x0044
+#define CMU_NANDCCLK		0x004C
+#define CMU_SD0CLK		0x0050
+#define CMU_SD1CLK		0x0054
+#define CMU_SD2CLK		0x0058
+#define CMU_UART0CLK		0x005C
+#define CMU_UART1CLK		0x0060
+#define CMU_UART2CLK		0x0064
+#define CMU_UART3CLK		0x0068
+#define CMU_UART4CLK		0x006C
+#define CMU_UART5CLK		0x0070
+#define CMU_UART6CLK		0x0074
+#define CMU_PWM0CLK		0x0078
+#define CMU_PWM1CLK		0x007C
+#define CMU_PWM2CLK		0x0080
+#define CMU_PWM3CLK		0x0084
+#define CMU_PWM4CLK		0x0088
+#define CMU_PWM5CLK		0x008C
+#define CMU_GPU3DCLK		0x0090
+#define CMU_CORECTL		0x009C
+#define CMU_DEVCLKEN0		0x00A0
+#define CMU_DEVCLKEN1		0x00A4
+#define CMU_DEVRST0		0x00A8
+#define CMU_DEVRST1		0x00AC
+#define CMU_USBPLL		0x00B0
+#define CMU_ETHERNETPLL		0x00B4
+#define CMU_CVBSPLL		0x00B8
+#define CMU_SSTSCLK		0x00C0
+
+#define CMU_DEVCLKEN1_ETH	BIT(23)
+
+#define GPIO_MFP_PWM           (0xE01B0000)
+#define MFP_CTL0               (GPIO_MFP_PWM + 0x40)
+#define MFP_CTL1               (GPIO_MFP_PWM + 0x44)
+#define MFP_CTL2               (GPIO_MFP_PWM + 0x48)
+#define MFP_CTL3               (GPIO_MFP_PWM + 0x4C)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-owl/regs_s900.h b/roms/u-boot/arch/arm/include/asm/arch-owl/regs_s900.h
new file mode 100644
index 000000000..084bc9b8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-owl/regs_s900.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi S900 Register Definitions
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ *
+ */
+
+#ifndef _OWL_REGS_S900_H_
+#define _OWL_REGS_S900_H_
+
+/* CMU registers */
+#define CMU_COREPLL				(0x0000)
+#define CMU_DEVPLL				(0x0004)
+#define CMU_DDRPLL				(0x0008)
+#define CMU_NANDPLL				(0x000C)
+#define CMU_DISPLAYPLL				(0x0010)
+#define CMU_AUDIOPLL				(0x0014)
+#define CMU_TVOUTPLL				(0x0018)
+#define CMU_BUSCLK				(0x001C)
+#define CMU_SENSORCLK				(0x0020)
+#define CMU_LCDCLK				(0x0024)
+#define CMU_DSICLK				(0x0028)
+#define CMU_CSICLK				(0x002C)
+#define CMU_DECLK				(0x0030)
+#define CMU_BISPCLK				(0x0034)
+#define CMU_IMXCLK				(0x0038)
+#define CMU_HDECLK				(0x003C)
+#define CMU_VDECLK				(0x0040)
+#define CMU_VCECLK				(0x0044)
+#define CMU_NANDCCLK				(0x004C)
+#define CMU_SD0CLK				(0x0050)
+#define CMU_SD1CLK				(0x0054)
+#define CMU_SD2CLK				(0x0058)
+#define CMU_UART0CLK				(0x005C)
+#define CMU_UART1CLK				(0x0060)
+#define CMU_UART2CLK				(0x0064)
+#define CMU_PWM0CLK				(0x0070)
+#define CMU_PWM1CLK				(0x0074)
+#define CMU_PWM2CLK				(0x0078)
+#define CMU_PWM3CLK				(0x007C)
+#define CMU_USBPLL				(0x0080)
+#define CMU_ASSISTPLL				(0x0084)
+#define CMU_EDPCLK				(0x0088)
+#define CMU_GPU3DCLK				(0x0090)
+#define CMU_CORECTL				(0x009C)
+#define CMU_DEVCLKEN0				(0x00A0)
+#define CMU_DEVCLKEN1				(0x00A4)
+#define CMU_DEVRST0				(0x00A8)
+#define CMU_DEVRST1				(0x00AC)
+#define CMU_UART3CLK				(0x00B0)
+#define CMU_UART4CLK				(0x00B4)
+#define CMU_UART5CLK				(0x00B8)
+#define CMU_UART6CLK				(0x00BC)
+#define CMU_TLSCLK				(0x00C0)
+#define CMU_SD3CLK				(0x00C4)
+#define CMU_PWM4CLK				(0x00C8)
+#define CMU_PWM5CLK				(0x00CC)
+#define CMU_ANALOGDEBUG				(0x00D4)
+#define CMU_TVOUTPLLDEBUG0			(0x00EC)
+#define CMU_TVOUTPLLDEBUG1			(0x00FC)
+
+#define CMU_DEVCLKEN1_ETH			BIT(22)
+#define CLK_ETHERNET				CLK_ETH_MAC
+#define CMU_ETHERNETPLL				CMU_ASSISTPLL
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-px30/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-px30/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-px30/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-px30/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-px30/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-px30/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-pxa/bitfield.h b/roms/u-boot/arch/arm/include/asm/arch-pxa/bitfield.h
new file mode 100644
index 000000000..104a21c2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-pxa/bitfield.h
@@ -0,0 +1,112 @@
+/*
+ *	FILE		bitfield.h
+ *
+ *	Version		1.1
+ *	Author		Copyright (c) Marc A. Viredaz, 1998
+ *			DEC Western Research Laboratory, Palo Alto, CA
+ *	Date		April 1998 (April 1997)
+ *	System		Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose		Definition of macros to operate on bit fields.
+ */
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size		Size of the bit field, in number of bits.
+ *    Shft		Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld		Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field		Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize		Size of the bit field, in number of bits.
+ *    FShft		Shift value of the bit field with respect to bit 0.
+ *    FMsk		Mask for the bit field.
+ *    FAlnMsk		Mask for the bit field, aligned on bit 0.
+ *    F1stBit		First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value		Bit-field value.
+ *    Field		Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt		Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+			(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data		Data containing the bit-field to be extracted.
+ *    Field		Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr		Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+			((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-pxa/config.h b/roms/u-boot/arch/arm/include/asm/arch-pxa/config.h
new file mode 100644
index 000000000..75b0e491e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-pxa/config.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Andrew Ruder <andrew.ruder@elecsyscorp.com>
+ */
+
+#ifndef _ASM_ARM_PXA_CONFIG_
+#define _ASM_ARM_PXA_CONFIG_
+
+#include <asm/arch/pxa-regs.h>
+
+/*
+ * Generic timer support
+ */
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define	CONFIG_SYS_TIMER_RATE	3250000
+#elif defined(CONFIG_CPU_PXA25X)
+#define	CONFIG_SYS_TIMER_RATE	3686400
+#else
+#error "Timer frequency unknown - please config PXA CPU type"
+#endif
+
+#define CONFIG_SYS_TIMER_COUNTER	OSCR
+
+#endif /* _ASM_ARM_PXA_CONFIG_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-pxa/hardware.h b/roms/u-boot/arch/arm/include/asm/arch-pxa/hardware.h
new file mode 100644
index 000000000..6d0023d7b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-pxa/hardware.h
@@ -0,0 +1,82 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/hardware.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Note: This file was taken from linux-2.4.19-rmk4-pxa1
+ *
+ * - 2003/01/20 implementation specifics activated
+ *   Robert Schwebel <r.schwebel@pengutronix.de>
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/mach-types.h>
+
+/*
+ * Define CONFIG_CPU_MONAHANS in case some CPU of the PXA3xx family is selected.
+ * PXA300/310/320 all have distinct register mappings in some cases, that's why
+ * the exact CPU has to be selected. CONFIG_CPU_MONAHANS is a helper for common
+ * drivers and compatibility glue with old source then.
+ */
+#ifndef	CONFIG_CPU_MONAHANS
+#if	defined(CONFIG_CPU_PXA300) || \
+	defined(CONFIG_CPU_PXA310) || \
+	defined(CONFIG_CPU_PXA320)
+#define	CONFIG_CPU_MONAHANS
+#endif
+#endif
+
+/*
+ * These are statically mapped PCMCIA IO space for designs using it as a
+ * generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc.
+ * The actual PCMCIA code is mapping required IO region at run time.
+ */
+#define PCMCIA_IO_0_BASE	0xf6000000
+#define PCMCIA_IO_1_BASE	0xf7000000
+
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE		0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xff000000
+#define UNCACHED_ADDR		UNCACHED_PHYS_0
+
+/*
+ * Intel PXA internal I/O mappings:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
+ */
+
+#include "pxa-regs.h"
+
+#ifndef __ASSEMBLY__
+
+/*
+ * GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * This must be called *before* the corresponding IRQ is registered.
+ * Use this instead of directly setting GRER/GFER.
+ */
+#define GPIO_FALLING_EDGE	1
+#define GPIO_RISING_EDGE	2
+#define GPIO_BOTH_EDGES		3
+
+#endif
+
+#endif	/* _ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-pxa/pxa-regs.h b/roms/u-boot/arch/arm/include/asm/arch-pxa/pxa-regs.h
new file mode 100644
index 000000000..b81b42c07
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-pxa/pxa-regs.h
@@ -0,0 +1,2635 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/pxa-regs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de
+ *   Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions.
+ *   Added include for hardware.h (for __REG definition)
+ */
+#ifndef _PXA_REGS_H_
+#define _PXA_REGS_H_
+
+#include "bitfield.h"
+#include "hardware.h"
+
+/* FIXME hack so that SA-1111.h will work [cb] */
+
+#ifndef __ASSEMBLY__
+typedef unsigned short	Word16 ;
+typedef unsigned int	Word32 ;
+typedef Word32		Word ;
+typedef Word		Quad [4] ;
+typedef void		*Address ;
+typedef void		(*ExcpHndlr) (void) ;
+#endif
+
+/*
+ * PXA Chip selects
+ */
+#ifdef CONFIG_CPU_MONAHANS
+#define PXA_CS0_PHYS   0x00000000 /* for both small and large same start */
+#define PXA_CS1_PHYS   0x04000000 /* Small partition start address (64MB) */
+#define PXA_CS1_LPHYS  0x30000000 /* Large partition start address (256MB) */
+#define PXA_CS2_PHYS   0x10000000 /* (64MB) */
+#define PXA_CS3_PHYS   0x14000000 /* (64MB) */
+#define PXA_PCMCIA_PHYS        0x20000000 /* (256MB) */
+#else
+#define PXA_CS0_PHYS	0x00000000
+#define PXA_CS1_PHYS	0x04000000
+#define PXA_CS2_PHYS	0x08000000
+#define PXA_CS3_PHYS	0x0C000000
+#define PXA_CS4_PHYS	0x10000000
+#define PXA_CS5_PHYS	0x14000000
+#endif /* CONFIG_CPU_MONAHANS */
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp) /* PCMCIA Space [byte]		   */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]	   */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]	   */
+
+#ifndef CONFIG_CPU_MONAHANS             /* Monahans supports only one slot */
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]	   */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]	   */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]	   */
+#endif
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]	   */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]	   */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]	   */
+
+#define _PCMCIA(Nb)			/* PCMCIA [0..1]		   */ \
+			(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]		   */
+#define _PCMCIAAttr(Nb)			/* PCMCIA Attribute [0..1]	   */ \
+			(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)			/* PCMCIA Memory [0..1]		   */ \
+			(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0			   */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O			   */
+#define _PCMCIA0Attr	_PCMCIAAttr (0) /* PCMCIA 0 Attribute		   */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory		   */
+
+#ifndef CONFIG_CPU_MONAHANS             /* Monahans supports only one slot */
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1			   */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O			   */
+#define _PCMCIA1Attr	_PCMCIAAttr (1) /* PCMCIA 1 Attribute		   */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory		   */
+#endif
+
+/*
+ * DMA Controller
+ */
+#define DCSR0		0x40000000  /* DMA Control / Status Register for Channel 0 */
+#define DCSR1		0x40000004  /* DMA Control / Status Register for Channel 1 */
+#define DCSR2		0x40000008  /* DMA Control / Status Register for Channel 2 */
+#define DCSR3		0x4000000c  /* DMA Control / Status Register for Channel 3 */
+#define DCSR4		0x40000010  /* DMA Control / Status Register for Channel 4 */
+#define DCSR5		0x40000014  /* DMA Control / Status Register for Channel 5 */
+#define DCSR6		0x40000018  /* DMA Control / Status Register for Channel 6 */
+#define DCSR7		0x4000001c  /* DMA Control / Status Register for Channel 7 */
+#define DCSR8		0x40000020  /* DMA Control / Status Register for Channel 8 */
+#define DCSR9		0x40000024  /* DMA Control / Status Register for Channel 9 */
+#define DCSR10		0x40000028  /* DMA Control / Status Register for Channel 10 */
+#define DCSR11		0x4000002c  /* DMA Control / Status Register for Channel 11 */
+#define DCSR12		0x40000030  /* DMA Control / Status Register for Channel 12 */
+#define DCSR13		0x40000034  /* DMA Control / Status Register for Channel 13 */
+#define DCSR14		0x40000038  /* DMA Control / Status Register for Channel 14 */
+#define DCSR15		0x4000003c  /* DMA Control / Status Register for Channel 15 */
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define DCSR16		0x40000040  /* DMA Control / Status Register for Channel 16 */
+#define DCSR17		0x40000044  /* DMA Control / Status Register for Channel 17 */
+#define DCSR18		0x40000048  /* DMA Control / Status Register for Channel 18 */
+#define DCSR19		0x4000004c  /* DMA Control / Status Register for Channel 19 */
+#define DCSR20		0x40000050  /* DMA Control / Status Register for Channel 20 */
+#define DCSR21		0x40000054  /* DMA Control / Status Register for Channel 21 */
+#define DCSR22		0x40000058  /* DMA Control / Status Register for Channel 22 */
+#define DCSR23		0x4000005c  /* DMA Control / Status Register for Channel 23 */
+#define DCSR24		0x40000060  /* DMA Control / Status Register for Channel 24 */
+#define DCSR25		0x40000064  /* DMA Control / Status Register for Channel 25 */
+#define DCSR26		0x40000068  /* DMA Control / Status Register for Channel 26 */
+#define DCSR27		0x4000006c  /* DMA Control / Status Register for Channel 27 */
+#define DCSR28		0x40000070  /* DMA Control / Status Register for Channel 28 */
+#define DCSR29		0x40000074  /* DMA Control / Status Register for Channel 29 */
+#define DCSR30		0x40000078  /* DMA Control / Status Register for Channel 30 */
+#define DCSR31		0x4000007c  /* DMA Control / Status Register for Channel 31 */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
+
+#define DCSR(x)		(0x40000000 | ((x) << 2))
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define DCSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)	/* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)	/* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)	/* The Descriptor Compare Status */
+#define DCSR_ENRINTR	(1 << 9)	/* The end of Receive */
+#endif
+
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#define DINT		0x400000f0  /* DMA Interrupt Register */
+
+#define DRCMR0		0x40000100  /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1		0x40000104  /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2		0x40000108  /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3		0x4000010c  /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4		0x40000110  /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5		0x40000114  /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6		0x40000118  /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7		0x4000011c  /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8		0x40000120  /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9		0x40000124  /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10		0x40000128  /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11		0x4000012c  /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12		0x40000130  /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13		0x40000134  /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14		0x40000138  /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15		0x4000013c  /* Reserved */
+#define DRCMR16		0x40000140  /* Reserved */
+#define DRCMR17		0x40000144  /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18		0x40000148  /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19		0x4000014c  /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20		0x40000150  /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21		0x40000154  /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22		0x40000158  /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23		0x4000015c  /* Reserved */
+#define DRCMR24		0x40000160  /* Reserved */
+#define DRCMR25		0x40000164  /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26		0x40000168  /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27		0x4000016C  /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28		0x40000170  /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29		0x40000174  /* Reserved */
+#define DRCMR30		0x40000178  /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31		0x4000017C  /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32		0x40000180  /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33		0x40000184  /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34		0x40000188  /* Reserved */
+#define DRCMR35		0x4000018C  /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36		0x40000190  /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37		0x40000194  /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38		0x40000198  /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39		0x4000019C  /* Reserved */
+
+#define DRCMR68		       0x40001110  /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69		       0x40001114  /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70		       0x40001118  /* Request to Channel Map Register for Camera FIFO 2 Request */
+
+#define DRCMRRXSADR	DRCMR2
+#define DRCMRTXSADR	DRCMR3
+#define DRCMRRXBTRBR	DRCMR4
+#define DRCMRTXBTTHR	DRCMR5
+#define DRCMRRXFFRBR	DRCMR6
+#define DRCMRTXFFTHR	DRCMR7
+#define DRCMRRXMCDR	DRCMR8
+#define DRCMRRXMODR	DRCMR9
+#define DRCMRTXMODR	DRCMR10
+#define DRCMRRXPCDR	DRCMR11
+#define DRCMRTXPCDR	DRCMR12
+#define DRCMRRXSSDR	DRCMR13
+#define DRCMRTXSSDR	DRCMR14
+#define DRCMRRXICDR	DRCMR17
+#define DRCMRTXICDR	DRCMR18
+#define DRCMRRXSTRBR	DRCMR19
+#define DRCMRTXSTTHR	DRCMR20
+#define DRCMRRXMMC	DRCMR21
+#define DRCMRTXMMC	DRCMR22
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x0f		/* mask for Channel Number (read / write) */
+
+#define DDADR0		0x40000200  /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0		0x40000204  /* DMA Source Address Register Channel 0 */
+#define DTADR0		0x40000208  /* DMA Target Address Register Channel 0 */
+#define DCMD0		0x4000020c  /* DMA Command Address Register Channel 0 */
+#define DDADR1		0x40000210  /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1		0x40000214  /* DMA Source Address Register Channel 1 */
+#define DTADR1		0x40000218  /* DMA Target Address Register Channel 1 */
+#define DCMD1		0x4000021c  /* DMA Command Address Register Channel 1 */
+#define DDADR2		0x40000220  /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2		0x40000224  /* DMA Source Address Register Channel 2 */
+#define DTADR2		0x40000228  /* DMA Target Address Register Channel 2 */
+#define DCMD2		0x4000022c  /* DMA Command Address Register Channel 2 */
+#define DDADR3		0x40000230  /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3		0x40000234  /* DMA Source Address Register Channel 3 */
+#define DTADR3		0x40000238  /* DMA Target Address Register Channel 3 */
+#define DCMD3		0x4000023c  /* DMA Command Address Register Channel 3 */
+#define DDADR4		0x40000240  /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4		0x40000244  /* DMA Source Address Register Channel 4 */
+#define DTADR4		0x40000248  /* DMA Target Address Register Channel 4 */
+#define DCMD4		0x4000024c  /* DMA Command Address Register Channel 4 */
+#define DDADR5		0x40000250  /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5		0x40000254  /* DMA Source Address Register Channel 5 */
+#define DTADR5		0x40000258  /* DMA Target Address Register Channel 5 */
+#define DCMD5		0x4000025c  /* DMA Command Address Register Channel 5 */
+#define DDADR6		0x40000260  /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6		0x40000264  /* DMA Source Address Register Channel 6 */
+#define DTADR6		0x40000268  /* DMA Target Address Register Channel 6 */
+#define DCMD6		0x4000026c  /* DMA Command Address Register Channel 6 */
+#define DDADR7		0x40000270  /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7		0x40000274  /* DMA Source Address Register Channel 7 */
+#define DTADR7		0x40000278  /* DMA Target Address Register Channel 7 */
+#define DCMD7		0x4000027c  /* DMA Command Address Register Channel 7 */
+#define DDADR8		0x40000280  /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8		0x40000284  /* DMA Source Address Register Channel 8 */
+#define DTADR8		0x40000288  /* DMA Target Address Register Channel 8 */
+#define DCMD8		0x4000028c  /* DMA Command Address Register Channel 8 */
+#define DDADR9		0x40000290  /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9		0x40000294  /* DMA Source Address Register Channel 9 */
+#define DTADR9		0x40000298  /* DMA Target Address Register Channel 9 */
+#define DCMD9		0x4000029c  /* DMA Command Address Register Channel 9 */
+#define DDADR10		0x400002a0  /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10		0x400002a4  /* DMA Source Address Register Channel 10 */
+#define DTADR10		0x400002a8  /* DMA Target Address Register Channel 10 */
+#define DCMD10		0x400002ac  /* DMA Command Address Register Channel 10 */
+#define DDADR11		0x400002b0  /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11		0x400002b4  /* DMA Source Address Register Channel 11 */
+#define DTADR11		0x400002b8  /* DMA Target Address Register Channel 11 */
+#define DCMD11		0x400002bc  /* DMA Command Address Register Channel 11 */
+#define DDADR12		0x400002c0  /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12		0x400002c4  /* DMA Source Address Register Channel 12 */
+#define DTADR12		0x400002c8  /* DMA Target Address Register Channel 12 */
+#define DCMD12		0x400002cc  /* DMA Command Address Register Channel 12 */
+#define DDADR13		0x400002d0  /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13		0x400002d4  /* DMA Source Address Register Channel 13 */
+#define DTADR13		0x400002d8  /* DMA Target Address Register Channel 13 */
+#define DCMD13		0x400002dc  /* DMA Command Address Register Channel 13 */
+#define DDADR14		0x400002e0  /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14		0x400002e4  /* DMA Source Address Register Channel 14 */
+#define DTADR14		0x400002e8  /* DMA Target Address Register Channel 14 */
+#define DCMD14		0x400002ec  /* DMA Command Address Register Channel 14 */
+#define DDADR15		0x400002f0  /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15		0x400002f4  /* DMA Source Address Register Channel 15 */
+#define DTADR15		0x400002f8  /* DMA Target Address Register Channel 15 */
+#define DCMD15		0x400002fc  /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x)	(0x40000200 | ((x) << 4))
+#define DSADR(x)	(0x40000204 | ((x) << 4))
+#define DTADR(x)	(0x40000208 | ((x) << 4))
+#define DCMD(x)		(0x4000020c | ((x) << 4))
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/* default combinations */
+#define DCMD_RXPCDR	(DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
+#define DCMD_RXMCDR	(DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
+#define DCMD_TXPCDR	(DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
+
+/******************************************************************************/
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define IrSR_OFFSET 0x20
+
+#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
+#define IrSR_RXPL_POS_IS_ZERO 0x0
+#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
+#define IrSR_TXPL_POS_IS_ZERO 0x0
+#define IrSR_XMODE_PULSE_1_6  (1<<2)
+#define IrSR_XMODE_PULSE_3_16 0x0
+#define IrSR_RCVEIR_IR_MODE   (1<<1)
+#define IrSR_RCVEIR_UART_MODE 0x0
+#define IrSR_XMITIR_IR_MODE   (1<<0)
+#define IrSR_XMITIR_UART_MODE 0x0
+
+#define IrSR_IR_RECEIVE_ON (\
+		IrSR_RXPL_NEG_IS_ZERO | \
+		IrSR_TXPL_POS_IS_ZERO | \
+		IrSR_XMODE_PULSE_3_16 | \
+		IrSR_RCVEIR_IR_MODE   | \
+		IrSR_XMITIR_UART_MODE)
+
+#define IrSR_IR_TRANSMIT_ON (\
+		IrSR_RXPL_NEG_IS_ZERO | \
+		IrSR_TXPL_POS_IS_ZERO | \
+		IrSR_XMODE_PULSE_3_16 | \
+		IrSR_RCVEIR_UART_MODE | \
+		IrSR_XMITIR_IR_MODE)
+
+/*
+ * Serial Audio Controller
+ */
+/* FIXME the audio defines collide w/ the SA1111 defines.  I don't like these
+ * short defines because there is too much chance of namespace collision
+ */
+#define SACR0		0x40400000  /*  Global Control Register */
+#define SACR1		0x40400004  /*  Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0		0x4040000C  /*  Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR		0x40400014  /*  Serial Audio Interrupt Mask Register */
+#define SAICR		0x40400018  /*  Serial Audio Interrupt Clear Register */
+#define SADIV		0x40400060  /*  Audio Clock Divider Register. */
+#define SADR		0x40400080  /*  Serial Audio Data Register (TX and RX FIFO access Register). */
+
+/*
+ * AC97 Controller registers
+ */
+#define POCR		0x40500000  /* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+
+#define PICR		0x40500004  /* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+
+#define MCCR		0x40500008  /* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+
+#define GCR		0x4050000C  /* Global Control Register */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		0x40500010  /* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+
+#define PISR		0x40500014  /* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+
+#define MCSR		0x40500018  /* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+
+#define GSR		0x4050001C  /* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		0x40500020  /* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		0x40500040  /* PCM FIFO Data Register */
+#define MCDR		0x40500060  /* Mic-in FIFO Data Register */
+
+#define MOCR		0x40500100  /* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+
+#define MICR		0x40500108  /* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+
+#define MOSR		0x40500110  /* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+
+#define MISR		0x40500118  /* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+
+#define MODR		0x40500140  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	0x40500200  /* Primary Audio Codec */
+#define SAC_REG_BASE	0x40500300  /* Secondary Audio Codec */
+#define PMC_REG_BASE	0x40500400  /* Primary Modem Codec */
+#define SMC_REG_BASE	0x40500500  /* Secondary Modem Codec */
+
+
+/*
+ * USB Device Controller
+ */
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+
+#define UDCCR		0x40600000	/* UDC Control Register */
+#define UDCCR_UDE	(1 << 0)		/* UDC enable */
+#define UDCCR_UDA	(1 << 1)		/* UDC active */
+#define UDCCR_RSM	(1 << 2)		/* Device resume */
+#define UDCCR_EMCE	(1 << 3)		/* Endpoint Memory Configuration Error */
+#define UDCCR_SMAC	(1 << 4)		/* Switch Endpoint Memory to Active Configuration */
+#define UDCCR_RESIR	(1 << 29)		/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 28)		/* Suspend interrupt request */
+#define UDCCR_SM	(1 << 28)		/* Suspend interrupt mask */
+#define UDCCR_RSTIR	(1 << 27)		/* Reset interrupt request */
+#define UDCCR_REM	(1 << 27)		/* Reset interrupt mask */
+#define UDCCR_RM	(1 << 29)		/* resume interrupt mask */
+#define UDCCR_SRM	(UDCCR_SM|UDCCR_RM)
+#define UDCCR_OEN	(1 << 31)		/* On-the-Go Enable */
+#define UDCCR_AALTHNP	(1 << 30)		/* A-device Alternate Host Negotiation Protocol Port Support */
+#define UDCCR_AHNP	(1 << 29)		/* A-device Host Negotiation Protocol Support */
+#define UDCCR_BHNP	(1 << 28)		/* B-device Host Negotiation Protocol Enable */
+#define UDCCR_DWRE	(1 << 16)		/* Device Remote Wake-up Enable */
+#define UDCCR_ACN	(0x03 << 11)		/* Active UDC configuration Number */
+#define UDCCR_ACN_S	11
+#define UDCCR_AIN	(0x07 << 8)		/* Active UDC interface Number */
+#define UDCCR_AIN_S	8
+#define UDCCR_AAISN	(0x07 << 5)		/* Active UDC Alternate Interface  Setting Number */
+#define UDCCR_AAISN_S	5
+
+#define UDCCS0		0x40600100	/* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR	(1 << 0)		/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)		/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)		/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 16)		/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)		/* Sent stall */
+#define UDCCS0_FST	(1 << 5)		/* Force stall */
+#define UDCCS0_RNE	(1 << 6)		/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)		/* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1		0x40600104  /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6		0x40600028  /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11		0x4060003C  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 8)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2		0x40600108  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		0x4060002C  /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12		0x40600040  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3		0x4060001C  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		0x40600030  /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13		0x40600044  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4		0x40600020  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		0x40600034  /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14		0x40600048  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5		0x40600024  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		0x40600038  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15		0x4060004C  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UFNRH		0x40600060  /* UDC Frame Number Register High */
+#define UFNRL		0x40600014  /* UDC Frame Number Register Low */
+#define UBCR2		0x40600208  /* UDC Byte Count Reg 2 */
+#define UBCR4		0x4060006c  /* UDC Byte Count Reg 4 */
+#define UBCR7		0x40600070  /* UDC Byte Count Reg 7 */
+#define UBCR9		0x40600074  /* UDC Byte Count Reg 9 */
+#define UBCR12		0x40600078  /* UDC Byte Count Reg 12 */
+#define UBCR14		0x4060007c  /* UDC Byte Count Reg 14 */
+#define UDDR0		0x40600300  /* UDC Endpoint 0 Data Register */
+#define UDDR1		0x40600304  /* UDC Endpoint 1 Data Register */
+#define UDDR2		0x40600308  /* UDC Endpoint 2 Data Register */
+#define UDDR3		0x40600200  /* UDC Endpoint 3 Data Register */
+#define UDDR4		0x40600400  /* UDC Endpoint 4 Data Register */
+#define UDDR5		0x406000A0  /* UDC Endpoint 5 Data Register */
+#define UDDR6		0x40600600  /* UDC Endpoint 6 Data Register */
+#define UDDR7		0x40600680  /* UDC Endpoint 7 Data Register */
+#define UDDR8		0x40600700  /* UDC Endpoint 8 Data Register */
+#define UDDR9		0x40600900  /* UDC Endpoint 9 Data Register */
+#define UDDR10		0x406000C0  /* UDC Endpoint 10 Data Register */
+#define UDDR11		0x40600B00  /* UDC Endpoint 11 Data Register */
+#define UDDR12		0x40600B80  /* UDC Endpoint 12 Data Register */
+#define UDDR13		0x40600C00  /* UDC Endpoint 13 Data Register */
+#define UDDR14		0x40600E00  /* UDC Endpoint 14 Data Register */
+#define UDDR15		0x406000E0  /* UDC Endpoint 15 Data Register */
+
+#define UICR0		0x40600004  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1		0x40600008  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0		0x4060000C  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
+#define USIR0_IR1	(1 << 2)	/* Interrup request ep 1 */
+#define USIR0_IR2	(1 << 4)	/* Interrup request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrup request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrup request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrup request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */
+
+#define USIR1		0x40600010  /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrup request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrup request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrup request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+
+
+#define UDCICR0         0x40600004	/* UDC Interrupt Control Register0 */
+#define UDCICR1         0x40600008	/* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR	(1 << 1)			/* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0)			/* Packet Complete interrupt for EP */
+
+#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
+#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
+#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
+
+#define UDCISR0         0x4060000C /* UDC Interrupt Status Register 0 */
+#define UDCISR1         0x40600010 /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCISR1_IRSOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCISR1_IRRU	(1 << 29)	/* IntEn - Resume */
+#define UDCISR1_IRSU	(1 << 28)	/* IntEn - Suspend */
+#define UDCISR1_IRRS	(1 << 27)	/* IntEn - Reset */
+
+
+#define UDCFNR			0x40600014 /* UDC Frame Number Register */
+#define UDCOTGICR		0x40600018 /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF		(1 << 24)	/* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR		(1 << 17)	/* Extra Transciever Interrupt Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF		(1 << 16)	/* Extra Transciever Interrupt Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R	(1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40F	(1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV44R	(1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge  Interrupt Enable */
+#define UDCOTGICR_IEVV44F	(1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge Interrupt Enable */
+#define UDCOTGICR_IESVR		(1 << 5)	/* OTG Session Valid Rising Edge Interrupt Enable */
+#define UDCOTGICR_IESVF		(1 << 4)	/* OTG Session Valid Falling Edge Interrupt Enable */
+#define UDCOTGICR_IESDR		(1 << 3)	/* OTG A-Device SRP Detect Rising Edge Interrupt Enable */
+#define UDCOTGICR_IESDF		(1 << 2)	/* OTG A-Device SRP Detect Falling  Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR		(1 << 1)	/* OTG ID Change Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEIDF		(1 << 0)	/* OTG ID Change Falling Edge Interrupt Enable */
+
+#define UDCCSN(x)	(0x40600100 + ((x) << 2))
+#define UDCCSR0		0x40600100 /* UDC Control/Status register - Endpoint 0 */
+
+#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
+#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
+#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
+#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define UDCCSRA         0x40600104 /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB         0x40600108 /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC         0x4060010C /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD         0x40600110 /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE         0x40600114 /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF         0x40600118 /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG         0x4060011C /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH         0x40600120 /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI         0x40600124 /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ         0x40600128 /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK         0x4060012C /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL         0x40600130 /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM         0x40600134 /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN         0x40600138 /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP         0x4060013C /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ         0x40600140 /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR         0x40600144 /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS         0x40600148 /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT         0x4060014C /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU         0x40600150 /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV         0x40600154 /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW         0x40600158 /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX         0x4060015C /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
+#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
+#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST	(1 << 5)	/* Force STALL */
+#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
+#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
+#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
+#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
+
+#define UDCBCN(x)	(0x40600200 + ((x) << 2))
+#define UDCBCR0         0x40600200 /* Byte Count Register - EP0 */
+#define UDCBCRA         0x40600204 /* Byte Count Register - EPA */
+#define UDCBCRB         0x40600208 /* Byte Count Register - EPB */
+#define UDCBCRC         0x4060020C /* Byte Count Register - EPC */
+#define UDCBCRD         0x40600210 /* Byte Count Register - EPD */
+#define UDCBCRE         0x40600214 /* Byte Count Register - EPE */
+#define UDCBCRF         0x40600218 /* Byte Count Register - EPF */
+#define UDCBCRG         0x4060021C /* Byte Count Register - EPG */
+#define UDCBCRH         0x40600220 /* Byte Count Register - EPH */
+#define UDCBCRI         0x40600224 /* Byte Count Register - EPI */
+#define UDCBCRJ         0x40600228 /* Byte Count Register - EPJ */
+#define UDCBCRK         0x4060022C /* Byte Count Register - EPK */
+#define UDCBCRL         0x40600230 /* Byte Count Register - EPL */
+#define UDCBCRM         0x40600234 /* Byte Count Register - EPM */
+#define UDCBCRN         0x40600238 /* Byte Count Register - EPN */
+#define UDCBCRP         0x4060023C /* Byte Count Register - EPP */
+#define UDCBCRQ         0x40600240 /* Byte Count Register - EPQ */
+#define UDCBCRR         0x40600244 /* Byte Count Register - EPR */
+#define UDCBCRS         0x40600248 /* Byte Count Register - EPS */
+#define UDCBCRT         0x4060024C /* Byte Count Register - EPT */
+#define UDCBCRU         0x40600250 /* Byte Count Register - EPU */
+#define UDCBCRV         0x40600254 /* Byte Count Register - EPV */
+#define UDCBCRW         0x40600258 /* Byte Count Register - EPW */
+#define UDCBCRX         0x4060025C /* Byte Count Register - EPX */
+
+#define UDCDN(x)	(0x40600300 + ((x) << 2))
+#define UDCDR0          0x40600300 /* Data Register - EP0 */
+#define UDCDRA          0x40600304 /* Data Register - EPA */
+#define UDCDRB          0x40600308 /* Data Register - EPB */
+#define UDCDRC          0x4060030C /* Data Register - EPC */
+#define UDCDRD          0x40600310 /* Data Register - EPD */
+#define UDCDRE          0x40600314 /* Data Register - EPE */
+#define UDCDRF          0x40600318 /* Data Register - EPF */
+#define UDCDRG          0x4060031C /* Data Register - EPG */
+#define UDCDRH          0x40600320 /* Data Register - EPH */
+#define UDCDRI          0x40600324 /* Data Register - EPI */
+#define UDCDRJ          0x40600328 /* Data Register - EPJ */
+#define UDCDRK          0x4060032C /* Data Register - EPK */
+#define UDCDRL          0x40600330 /* Data Register - EPL */
+#define UDCDRM          0x40600334 /* Data Register - EPM */
+#define UDCDRN          0x40600338 /* Data Register - EPN */
+#define UDCDRP          0x4060033C /* Data Register - EPP */
+#define UDCDRQ          0x40600340 /* Data Register - EPQ */
+#define UDCDRR          0x40600344 /* Data Register - EPR */
+#define UDCDRS          0x40600348 /* Data Register - EPS */
+#define UDCDRT          0x4060034C /* Data Register - EPT */
+#define UDCDRU          0x40600350 /* Data Register - EPU */
+#define UDCDRV          0x40600354 /* Data Register - EPV */
+#define UDCDRW          0x40600358 /* Data Register - EPW */
+#define UDCDRX          0x4060035C /* Data Register - EPX */
+
+#define UDCCN(x)	(0x40600400 + ((x) << 2))
+#define UDCCRA          0x40600404 /* Configuration register EPA */
+#define UDCCRB          0x40600408 /* Configuration register EPB */
+#define UDCCRC          0x4060040C /* Configuration register EPC */
+#define UDCCRD          0x40600410 /* Configuration register EPD */
+#define UDCCRE          0x40600414 /* Configuration register EPE */
+#define UDCCRF          0x40600418 /* Configuration register EPF */
+#define UDCCRG          0x4060041C /* Configuration register EPG */
+#define UDCCRH          0x40600420 /* Configuration register EPH */
+#define UDCCRI          0x40600424 /* Configuration register EPI */
+#define UDCCRJ          0x40600428 /* Configuration register EPJ */
+#define UDCCRK          0x4060042C /* Configuration register EPK */
+#define UDCCRL          0x40600430 /* Configuration register EPL */
+#define UDCCRM          0x40600434 /* Configuration register EPM */
+#define UDCCRN          0x40600438 /* Configuration register EPN */
+#define UDCCRP          0x4060043C /* Configuration register EPP */
+#define UDCCRQ          0x40600440 /* Configuration register EPQ */
+#define UDCCRR          0x40600444 /* Configuration register EPR */
+#define UDCCRS          0x40600448 /* Configuration register EPS */
+#define UDCCRT          0x4060044C /* Configuration register EPT */
+#define UDCCRU          0x40600450 /* Configuration register EPU */
+#define UDCCRV          0x40600454 /* Configuration register EPV */
+#define UDCCRW          0x40600458 /* Configuration register EPW */
+#define UDCCRX          0x4060045C /* Configuration register EPX */
+
+#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
+#define UDCCONR_CN_S	(25)
+#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
+#define UDCCONR_IN_S	(22)
+#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
+#define UDCCONR_AISN_S	(19)
+#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
+#define UDCCONR_EN_S	(15)
+#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
+#define UDCCONR_ET_S	(13)
+#define UDCCONR_ET_INT	(0x03 << 13)	/* Interrupt */
+#define UDCCONR_ET_BULK	(0x02 << 13)	/* Bulk */
+#define UDCCONR_ET_ISO	(0x01 << 13)	/* Isochronous */
+#define UDCCONR_ET_NU	(0x00 << 13)	/* Not used */
+#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
+#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
+#define UDCCONR_MPS_S	(2)
+#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
+#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR	(0x2)
+#define UDC_INT_PACKETCMP	(0x1)
+#define UDC_FNR_MASK		(0x7ff)
+#define UDCCSR_WR_MASK		(UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK		(0x3ff)
+
+#endif /* CONFIG_CPU_PXA27X */
+
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+
+/******************************************************************************/
+/*
+ * USB Host Controller
+ */
+#define OHCI_REGS_BASE	0x4C000000	/* required for ohci driver */
+#define UHCREV		0x4C000000
+#define UHCHCON		0x4C000004
+#define UHCCOMS		0x4C000008
+#define UHCINTS		0x4C00000C
+#define UHCINTE		0x4C000010
+#define UHCINTD		0x4C000014
+#define UHCHCCA		0x4C000018
+#define UHCPCED		0x4C00001C
+#define UHCCHED		0x4C000020
+#define UHCCCED		0x4C000024
+#define UHCBHED		0x4C000028
+#define UHCBCED		0x4C00002C
+#define UHCDHEAD	0x4C000030
+#define UHCFMI		0x4C000034
+#define UHCFMR		0x4C000038
+#define UHCFMN		0x4C00003C
+#define UHCPERS		0x4C000040
+#define UHCLST		0x4C000044
+#define UHCRHDA		0x4C000048
+#define UHCRHDB		0x4C00004C
+#define UHCRHS		0x4C000050
+#define UHCRHPS1	0x4C000054
+#define UHCRHPS2	0x4C000058
+#define UHCRHPS3	0x4C00005C
+#define UHCSTAT		0x4C000060
+#define UHCHR		0x4C000064
+#define UHCHIE		0x4C000068
+#define UHCHIT		0x4C00006C
+
+#define UHCCOMS_HCR	(1<<0)
+
+#define UHCHR_FSBIR	(1<<0)
+#define UHCHR_FHR	(1<<1)
+#define UHCHR_CGR	(1<<2)
+#define UHCHR_SSDC	(1<<3)
+#define UHCHR_UIT	(1<<4)
+#define UHCHR_SSE	(1<<5)
+#define UHCHR_PSPL	(1<<6)
+#define UHCHR_PCPL	(1<<7)
+#define UHCHR_SSEP0	(1<<9)
+#define UHCHR_SSEP1	(1<<10)
+#define UHCHR_SSEP2	(1<<11)
+
+#define UHCHIE_UPRIE	(1<<13)
+#define UHCHIE_UPS2IE	(1<<12)
+#define UHCHIE_UPS1IE	(1<<11)
+#define UHCHIE_TAIE	(1<<10)
+#define UHCHIE_HBAIE	(1<<8)
+#define UHCHIE_RWIE	(1<<7)
+
+#define UP2OCR		0x40600020
+
+#define UP2OCR_HXOE	(1<<17)
+#define UP2OCR_HXS	(1<<16)
+#define UP2OCR_IDON	(1<<10)
+#define UP2OCR_EXSUS	(1<<9)
+#define UP2OCR_EXSP	(1<<8)
+#define UP2OCR_DMSTATE	(1<<7)
+#define UP2OCR_VPM	(1<<6)
+#define UP2OCR_DPSTATE	(1<<5)
+#define UP2OCR_DPPUE	(1<<4)
+#define UP2OCR_DMPDE	(1<<3)
+#define UP2OCR_DPPDE	(1<<2)
+#define UP2OCR_CPVPE	(1<<1)
+#define UP2OCR_CPVEN	(1<<0)
+
+#endif	/* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
+
+/******************************************************************************/
+/*
+ * Fast Infrared Communication Port
+ */
+#define ICCR0		0x40800000  /* ICP Control Register 0 */
+#define ICCR1		0x40800004  /* ICP Control Register 1 */
+#define ICCR2		0x40800008  /* ICP Control Register 2 */
+#define ICDR		0x4080000c  /* ICP Data Register */
+#define ICSR0		0x40800014  /* ICP Status Register 0 */
+#define ICSR1		0x40800018  /* ICP Status Register 1 */
+
+/*
+ * Real Time Clock
+ */
+#define RCNR		0x40900000  /* RTC Count Register */
+#define RTAR		0x40900004  /* RTC Alarm Register */
+#define RTSR		0x40900008  /* RTC Status Register */
+#define RTTR		0x4090000C  /* RTC Timer Trim Register */
+#define RDAR1		0x40900018  /* Wristwatch Day Alarm Reg 1 */
+#define RDAR2		0x40900020  /* Wristwatch Day Alarm Reg 2 */
+#define RYAR1		0x4090001C  /* Wristwatch Year Alarm Reg 1 */
+#define RYAR2		0x40900024  /* Wristwatch Year Alarm Reg 2 */
+#define SWAR1		0x4090002C  /* Stopwatch Alarm Register 1 */
+#define SWAR2		0x40900030  /* Stopwatch Alarm Register 2 */
+#define PIAR		0x40900038  /* Periodic Interrupt Alarm Register */
+#define RDCR		0x40900010  /* RTC Day Count Register. */
+#define RYCR		0x40900014  /* RTC Year Count Register. */
+#define SWCR		0x40900028  /* Stopwatch Count Register */
+#define RTCPICR		0x40900034  /* Periodic Interrupt Counter Register */
+
+#define RTSR_PICE	(1 << 15)	/* Peridoc interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Peridoc interrupt Alarm enable */
+#define RTSR_PIAL	(1 << 13)	/* Peridoc  interrupt Alarm status */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+/******************************************************************************/
+/*
+ * OS Timer & Match Registers
+ */
+#define OSMR0		0x40A00000  /* OS Timer Match Register 0 */
+#define OSMR1		0x40A00004  /* OS Timer Match Register 1 */
+#define OSMR2		0x40A00008  /* OS Timer Match Register 2 */
+#define OSMR3		0x40A0000C  /* OS Timer Match Register 3 */
+#define OSCR		0x40A00010  /* OS Timer Counter Register */
+#define OSSR		0x40A00014  /* OS Timer Status Register */
+#define OWER		0x40A00018  /* OS Timer Watchdog Enable Register */
+#define OIER		0x40A0001C  /* OS Timer Interrupt Enable Register */
+
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define OSCR4		0x40A00040  /* OS Timer Counter Register 4 */
+#define OSCR5		0x40A00044  /* OS Timer Counter Register 5 */
+#define OSCR6		0x40A00048  /* OS Timer Counter Register 6 */
+#define OSCR7		0x40A0004C  /* OS Timer Counter Register 7 */
+#define OSCR8		0x40A00050  /* OS Timer Counter Register 8 */
+#define OSCR9		0x40A00054  /* OS Timer Counter Register 9 */
+#define OSCR10		0x40A00058  /* OS Timer Counter Register 10 */
+#define OSCR11		0x40A0005C  /* OS Timer Counter Register 11 */
+
+#define OSMR4		0x40A00080  /* OS Timer Match Register 4 */
+#define OSMR5		0x40A00084  /* OS Timer Match Register 5 */
+#define OSMR6		0x40A00088  /* OS Timer Match Register 6 */
+#define OSMR7		0x40A0008C  /* OS Timer Match Register 7 */
+#define OSMR8		0x40A00090  /* OS Timer Match Register 8 */
+#define OSMR9		0x40A00094  /* OS Timer Match Register 9 */
+#define OSMR10		0x40A00098  /* OS Timer Match Register 10 */
+#define OSMR11		0x40A0009C  /* OS Timer Match Register 11 */
+
+#define OMCR4		0x40A000C0  /* OS Match Control Register 4 */
+#define OMCR5		0x40A000C4  /* OS Match Control Register 5 */
+#define OMCR6		0x40A000C8  /* OS Match Control Register 6 */
+#define OMCR7		0x40A000CC  /* OS Match Control Register 7 */
+#define OMCR8		0x40A000D0  /* OS Match Control Register 8 */
+#define OMCR9		0x40A000D4  /* OS Match Control Register 9 */
+#define OMCR10		0x40A000D8  /* OS Match Control Register 10 */
+#define OMCR11		0x40A000DC  /* OS Match Control Register 11 */
+
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
+
+#define OSSR_M4		(1 << 4)	/* Match status channel 4 */
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E4		(1 << 4)	/* Interrupt enable channel 4 */
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+#define	OSCR_CLK_FREQ	3250
+
+/******************************************************************************/
+/*
+ * Core Clock
+ */
+
+#if defined(CONFIG_CPU_MONAHANS)
+#define ACCR		0x41340000  /* Application Subsystem Clock Configuration Register */
+#define ACSR		0x41340004  /* Application Subsystem Clock Status Register */
+#define AICSR		0x41340008  /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA		0x4134000C  /* A Clock Enable Register */
+#define CKENB		0x41340010  /* B Clock Enable Register */
+#define AC97_DIV	0x41340014  /* AC97 clock divisor value register */
+
+#define ACCR_SMC_MASK	0x03800000	/* Static Memory Controller Frequency Select */
+#define ACCR_SRAM_MASK	0x000c0000	/* SRAM Controller Frequency Select */
+#define ACCR_FC_MASK	0x00030000	/* Frequency Change Frequency Select */
+#define ACCR_HSIO_MASK	0x0000c000	/* High Speed IO Frequency Select */
+#define ACCR_DDR_MASK	0x00003000	/* DDR Memory Controller Frequency Select */
+#define ACCR_XN_MASK	0x00000700	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define ACCR_XL_MASK	0x0000001f	/* Crystal Frequency to Memory Frequency Multiplier */
+#define ACCR_XPDIS	(1 << 31)
+#define ACCR_SPDIS	(1 << 30)
+#define ACCR_13MEND1	(1 << 27)
+#define ACCR_D0CS	(1 << 26)
+#define ACCR_13MEND2	(1 << 21)
+#define ACCR_PCCE	(1 << 11)
+
+#define CKENA_30_MSL0	(1 << 30)	/* MSL0 Interface Unit Clock Enable */
+#define CKENA_29_SSP4	(1 << 29)	/* SSP3 Unit Clock Enable */
+#define CKENA_28_SSP3	(1 << 28)	/* SSP2 Unit Clock Enable */
+#define CKENA_27_SSP2	(1 << 27)	/* SSP1 Unit Clock Enable */
+#define CKENA_26_SSP1	(1 << 26)	/* SSP0 Unit Clock Enable */
+#define CKENA_25_TSI	(1 << 25)	/* TSI Clock Enable */
+#define CKENA_24_AC97	(1 << 24)	/* AC97 Unit Clock Enable */
+#define CKENA_23_STUART	(1 << 23)	/* STUART Unit Clock Enable */
+#define CKENA_22_FFUART	(1 << 22)	/* FFUART Unit Clock Enable */
+#define CKENA_21_BTUART	(1 << 21)	/* BTUART Unit Clock Enable */
+#define CKENA_20_UDC	(1 << 20)	/* UDC Clock Enable */
+#define CKENA_19_TPM	(1 << 19)	/* TPM Unit Clock Enable */
+#define CKENA_18_USIM1	(1 << 18)	/* USIM1 Unit Clock Enable */
+#define CKENA_17_USIM0	(1 << 17)	/* USIM0 Unit Clock Enable */
+#define CKENA_15_CIR	(1 << 15)	/* Consumer IR Clock Enable */
+#define CKENA_14_KEY	(1 << 14)	/* Keypad Controller Clock Enable */
+#define CKENA_13_MMC1	(1 << 13)	/* MMC1 Clock Enable */
+#define CKENA_12_MMC0	(1 << 12)	/* MMC0 Clock Enable */
+#define CKENA_11_FLASH	(1 << 11)	/* Boot ROM Clock Enable */
+#define CKENA_10_SRAM	(1 << 10)	/* SRAM Controller Clock Enable */
+#define CKENA_9_SMC	(1 << 9)	/* Static Memory Controller */
+#define CKENA_8_DMC	(1 << 8)	/* Dynamic Memory Controller */
+#define CKENA_7_GRAPHICS (1 << 7)	/* 2D Graphics Clock Enable */
+#define CKENA_6_USBCLI	(1 << 6)	/* USB Client Unit Clock Enable */
+#define CKENA_4_NAND	(1 << 4)	/* NAND Flash Controller Clock Enable */
+#define CKENA_3_CAMERA	(1 << 3)	/* Camera Interface Clock Enable */
+#define CKENA_2_USBHOST	(1 << 2)	/* USB Host Unit Clock Enable */
+#define CKENA_1_LCD	(1 << 1)	/* LCD Unit Clock Enable */
+
+#define CKENB_9_SYSBUS2	(1 << 9)	/* System bus 2 */
+#define CKENB_8_1WIRE	(1 << 8)	/* One Wire Interface Unit Clock Enable */
+#define CKENB_7_GPIO	(1 << 7)	/* GPIO Clock Enable */
+#define CKENB_6_IRQ	(1 << 6)	/* Interrupt Controller Clock Enable */
+#define CKENB_4_I2C	(1 << 4)	/* I2C Unit Clock Enable */
+#define CKENB_1_PWM1	(1 << 1)	/* PWM2 & PWM3 Clock Enable */
+#define CKENB_0_PWM0	(1 << 0)	/* PWM0 & PWM1 Clock Enable */
+
+#else /* if defined CONFIG_CPU_MONAHANS */
+
+#define CCCR		0x41300000  /* Core Clock Configuration Register */
+#define CKEN		0x41300004  /* Clock Enable Register */
+#define OSCC		0x41300008  /* Oscillator Configuration Register */
+#define CCSR		0x4130000C /* Core Clock Status Register */
+
+#define CKEN23_SSP1	(1 << 23) /* SSP1 Unit Clock Enable */
+#define CKEN22_MEMC	(1 << 22) /* Memory Controler */
+#define CKEN21_MSHC	(1 << 21) /* Memery Stick Host Controller */
+#define CKEN20_IM	(1 << 20) /* Internal Memory Clock Enable */
+#define CKEN19_KEYPAD	(1 << 19) /* Keypad Interface Clock Enable */
+#define CKEN18_USIM	(1 << 18) /* USIM Unit Clock Enable */
+#define CKEN17_MSL	(1 << 17) /* MSL Interface Unit Clock Enable */
+#define CKEN15_PWR_I2C	(1 << 15) /* PWR_I2C Unit Clock Enable */
+#define CKEN9_OST	(1 << 9)  /* OS Timer Unit Clock Enable */
+#define CKEN4_SSP3	(1 << 4)  /* SSP3 Unit Clock Enable */
+
+#define CCCR_N_MASK	0x0380		/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#if !defined(CONFIG_CPU_PXA27X)
+#define CCCR_M_MASK	0x0060		/* Memory Frequency to Run Mode Frequency Multiplier */
+#endif
+#define CCCR_L_MASK	0x001f		/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN24_CAMERA	(1 << 24)	/* Camera Interface Clock Enable */
+#define CKEN23_SSP1	(1 << 23)	/* SSP1 Unit Clock Enable */
+#define CKEN22_MEMC	(1 << 22)	/* Memory Controller Clock Enable */
+#define CKEN21_MEMSTK	(1 << 21)	/* Memory Stick Host Controller */
+#define CKEN20_IM	(1 << 20)	/* Internal Memory Clock Enable */
+#define CKEN19_KEYPAD	(1 << 19)	/* Keypad Interface Clock Enable */
+#define CKEN18_USIM	(1 << 18)	/* USIM Unit Clock Enable */
+#define CKEN17_MSL	(1 << 17)	/* MSL Unit Clock Enable */
+#define CKEN16_LCD	(1 << 16)	/* LCD Unit Clock Enable */
+#define CKEN15_PWRI2C	(1 << 15)	/* PWR I2C Unit Clock Enable */
+#define CKEN14_I2C	(1 << 14)	/* I2C Unit Clock Enable */
+#define CKEN13_FICP	(1 << 13)	/* FICP Unit Clock Enable */
+#define CKEN12_MMC	(1 << 12)	/* MMC Unit Clock Enable */
+#define CKEN11_USB	(1 << 11)	/* USB Unit Clock Enable */
+#if defined(CONFIG_CPU_PXA27X)
+#define CKEN10_USBHOST	(1 << 10)	/* USB Host Unit Clock Enable */
+#define CKEN24_CAMERA	(1 << 24)	/* Camera Unit Clock Enable */
+#endif
+#define CKEN8_I2S	(1 << 8)	/* I2S Unit Clock Enable */
+#define CKEN7_BTUART	(1 << 7)	/* BTUART Unit Clock Enable */
+#define CKEN6_FFUART	(1 << 6)	/* FFUART Unit Clock Enable */
+#define CKEN5_STUART	(1 << 5)	/* STUART Unit Clock Enable */
+#define CKEN3_SSP	(1 << 3)	/* SSP Unit Clock Enable */
+#define CKEN2_AC97	(1 << 2)	/* AC97 Unit Clock Enable */
+#define CKEN1_PWM1	(1 << 1)	/* PWM1 Clock Enable */
+#define CKEN0_PWM0	(1 << 0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
+#if !defined(CONFIG_CPU_PXA27X)
+#define	 CCCR_L09      (0x1F)
+#define	 CCCR_L27      (0x1)
+#define	 CCCR_L32      (0x2)
+#define	 CCCR_L36      (0x3)
+#define	 CCCR_L40      (0x4)
+#define	 CCCR_L45      (0x5)
+
+#define	 CCCR_M1       (0x1 << 5)
+#define	 CCCR_M2       (0x2 << 5)
+#define	 CCCR_M4       (0x3 << 5)
+
+#define	 CCCR_N10      (0x2 << 7)
+#define	 CCCR_N15      (0x3 << 7)
+#define	 CCCR_N20      (0x4 << 7)
+#define	 CCCR_N25      (0x5 << 7)
+#define	 CCCR_N30      (0x6 << 7)
+#endif
+
+#endif /* CONFIG_CPU_MONAHANS */
+
+/******************************************************************************/
+/*
+ * Pulse Width Modulator
+ */
+#define PWM_CTRL0	0x40B00000  /* PWM 0 Control Register */
+#define PWM_PWDUTY0	0x40B00004  /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0	0x40B00008  /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1	0x40C00000  /* PWM 1 Control Register */
+#define PWM_PWDUTY1	0x40C00004  /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1	0x40C00008  /* PWM 1 Period Control Register */
+
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define PWM_CTRL2	0x40B00010  /* PWM 2 Control Register */
+#define PWM_PWDUTY2	0x40B00014  /* PWM 2 Duty Cycle Register */
+#define PWM_PERVAL2	0x40B00018  /* PWM 2 Period Control Register */
+
+#define PWM_CTRL3	0x40C00010  /* PWM 3 Control Register */
+#define PWM_PWDUTY3	0x40C00014  /* PWM 3 Duty Cycle Register */
+#define PWM_PERVAL3	0x40C00018  /* PWM 3 Period Control Register */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
+
+/*
+ * Interrupt Controller
+ */
+#define ICIP		0x40D00000  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		0x40D00004  /* Interrupt Controller Mask Register */
+#define ICLR		0x40D00008  /* Interrupt Controller Level Register */
+#define ICFP		0x40D0000C  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		0x40D00010  /* Interrupt Controller Pending Register */
+#define ICCR		0x40D00014  /* Interrupt Controller Control Register */
+
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define ICHP		0x40D00018  /* Interrupt Controller Highest Priority Register */
+#define ICIP2		0x40D0009C  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		0x40D000A0  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		0x40D000A4  /* Interrupt Controller Level Register 2 */
+#define ICFP2		0x40D000A8  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		0x40D000AC  /* Interrupt Controller Pending Register 2 */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
+
+/******************************************************************************/
+/*
+ * General Purpose I/O
+ */
+#define GPLR0		0x40E00000  /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1		0x40E00004  /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2		0x40E00008  /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0		0x40E0000C  /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1		0x40E00010  /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2		0x40E00014  /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0		0x40E00018  /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1		0x40E0001C  /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2		0x40E00020  /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0		0x40E00024  /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1		0x40E00028  /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2		0x40E0002C  /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0		0x40E00030  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1		0x40E00034  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2		0x40E00038  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0		0x40E0003C  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1		0x40E00040  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2		0x40E00044  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0		0x40E00048  /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1		0x40E0004C  /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2		0x40E00050  /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L		0x40E00054  /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U		0x40E00058  /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L		0x40E0005C  /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U		0x40E00060  /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L		0x40E00064  /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U		0x40E00068  /* GPIO Alternate Function Select Register GPIO 80 */
+
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define GPLR3		0x40E00100  /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3		0x40E0010C  /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3		0x40E00118  /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3		0x40E00124  /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3		0x40E00130  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3		0x40E0013C  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3		0x40E00148  /* GPIO Edge Detect Status Register GPIO<127:96> */
+#define GAFR3_L		0x40E0006C  /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U		0x40E00070  /* GPIO Alternate Function Select Register GPIO<127:112> */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
+
+#ifdef CONFIG_CPU_MONAHANS
+#define GSDR0		0x40E00400 /* Bit-wise Set of GPDR[31:0] */
+#define GSDR1		0x40E00404 /* Bit-wise Set of GPDR[63:32] */
+#define GSDR2		0x40E00408 /* Bit-wise Set of GPDR[95:64] */
+#define GSDR3		0x40E0040C /* Bit-wise Set of GPDR[127:96] */
+
+#define GCDR0		0x40E00420 /* Bit-wise Clear of GPDR[31:0] */
+#define GCDR1		0x40E00424 /* Bit-wise Clear of GPDR[63:32] */
+#define GCDR2		0x40E00428 /* Bit-wise Clear of GPDR[95:64] */
+#define GCDR3		0x40E0042C /* Bit-wise Clear of GPDR[127:96] */
+
+#define GSRER0		0x40E00440 /* Set Rising Edge Det. Enable [31:0] */
+#define GSRER1		0x40E00444 /* Set Rising Edge Det. Enable [63:32] */
+#define GSRER2		0x40E00448 /* Set Rising Edge Det. Enable [95:64] */
+#define GSRER3		0x40E0044C /* Set Rising Edge Det. Enable [127:96] */
+
+#define GCRER0		0x40E00460 /* Clear Rising Edge Det. Enable [31:0] */
+#define GCRER1		0x40E00464 /* Clear Rising Edge Det. Enable [63:32] */
+#define GCRER2		0x40E00468 /* Clear Rising Edge Det. Enable [95:64] */
+#define GCRER3		0x40E0046C /* Clear Rising Edge Det. Enable[127:96] */
+
+#define GSFER0		0x40E00480 /* Set Falling Edge Det. Enable [31:0] */
+#define GSFER1		0x40E00484 /* Set Falling Edge Det. Enable [63:32] */
+#define GSFER2		0x40E00488 /* Set Falling Edge Det. Enable [95:64] */
+#define GSFER3		0x40E0048C /* Set Falling Edge Det. Enable[127:96] */
+
+#define GCFER0		0x40E004A0 /* Clr Falling Edge Det. Enable [31:0] */
+#define GCFER1		0x40E004A4 /* Clr Falling Edge Det. Enable [63:32] */
+#define GCFER2		0x40E004A8 /* Clr Falling Edge Det. Enable [95:64] */
+#define GCFER3		0x40E004AC /* Clr Falling Edge Det. Enable[127:96] */
+
+#define GSDR(x)		(0x40E00400 | ((x) & 0x60) >> 3)
+#define GCDR(x)		(0x40E00420 | ((x) & 0x60) >> 3)
+#endif
+
+#define _GPLR(x)	(0x40E00000 + (((x) & 0x60) >> 3))
+#define _GPDR(x)	(0x40E0000C + (((x) & 0x60) >> 3))
+#define _GPSR(x)	(0x40E00018 + (((x) & 0x60) >> 3))
+#define _GPCR(x)	(0x40E00024 + (((x) & 0x60) >> 3))
+#define _GRER(x)	(0x40E00030 + (((x) & 0x60) >> 3))
+#define _GFER(x)	(0x40E0003C + (((x) & 0x60) >> 3))
+#define _GEDR(x)	(0x40E00048 + (((x) & 0x60) >> 3))
+#define _GAFR(x)	(0x40E00054 + (((x) & 0x70) >> 2))
+
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define GPLR(x)		(((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3))
+#define GPDR(x)		(((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3))
+#define GPSR(x)		(((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3))
+#define GPCR(x)		(((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3))
+#define GRER(x)		(((((x) & 0x7f) < 96) ? _GRER(x) : GRER3))
+#define GFER(x)		(((((x) & 0x7f) < 96) ? _GFER(x) : GFER3))
+#define GEDR(x)		(((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3))
+#define GAFR(x)		(((((x) & 0x7f) < 96) ? _GAFR(x) : \
+			((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)))
+#else
+#define GPLR(x)		_GPLR(x)
+#define GPDR(x)		_GPDR(x)
+#define GPSR(x)		_GPSR(x)
+#define GPCR(x)		_GPCR(x)
+#define GRER(x)		_GRER(x)
+#define GFER(x)		_GFER(x)
+#define GEDR(x)		_GEDR(x)
+#define GAFR(x)		_GAFR(x)
+#endif
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+/******************************************************************************/
+/*
+ * Multi-function Pin Registers:
+ */
+/* PXA320 */
+#if defined(CONFIG_CPU_PXA320)
+#define	DF_IO0		0x40e1024c
+#define	DF_IO1		0x40e10254
+#define	DF_IO2		0x40e1025c
+#define	DF_IO3		0x40e10264
+#define	DF_IO4		0x40e1026c
+#define	DF_IO5		0x40e10274
+#define	DF_IO6		0x40e1027c
+#define	DF_IO7		0x40e10284
+#define	DF_IO8		0x40e10250
+#define	DF_IO9		0x40e10258
+#define	DF_IO10		0x40e10260
+#define	DF_IO11		0x40e10268
+#define	DF_IO12		0x40e10270
+#define	DF_IO13		0x40e10278
+#define	DF_IO14		0x40e10280
+#define	DF_IO15		0x40e10288
+#define	DF_CLE_nOE	0x40e10204
+#define	DF_ALE_nWE1	0x40e10208
+#define	DF_ALE_nWE2	0x40e1021c
+#define	DF_SCLK_E	0x40e10210
+#define	DF_nCS0		0x40e10224
+#define	DF_nCS1		0x40e10228
+#define	nBE0		0x40e10214
+#define	nBE1		0x40e10218
+#define	nLUA		0x40e10234
+#define	nLLA		0x40e10238
+#define	DF_ADDR0	0x40e1023c
+#define	DF_ADDR1	0x40e10240
+#define	DF_ADDR2	0x40e10244
+#define	DF_ADDR3	0x40e10248
+#define	DF_INT_RnB	0x40e10220
+#define	DF_nCS0		0x40e10224
+#define	DF_nCS1		0x40e10228
+#define	DF_nWE		0x40e1022c
+#define	DF_nRE		0x40e10230
+
+#define	nXCVREN		0x40e10138
+
+#define	GPIO0		0x40e10124
+#define	GPIO1		0x40e10128
+#define	GPIO2		0x40e1012c
+#define	GPIO3		0x40e10130
+#define	GPIO4		0x40e10134
+#define	GPIO5		0x40e1028c
+#define	GPIO6		0x40e10290
+#define	GPIO7		0x40e10294
+#define	GPIO8		0x40e10298
+#define	GPIO9		0x40e1029c
+#define	GPIO10		0x40e10458
+#define	GPIO11		0x40e102a0
+#define	GPIO12		0x40e102a4
+#define	GPIO13		0x40e102a8
+#define	GPIO14		0x40e102ac
+#define	GPIO15		0x40e102b0
+#define	GPIO16		0x40e102b4
+#define	GPIO17		0x40e102b8
+#define	GPIO18		0x40e102bc
+#define	GPIO19		0x40e102c0
+#define	GPIO20		0x40e102c4
+#define	GPIO21		0x40e102c8
+#define	GPIO22		0x40e102cc
+#define	GPIO23		0x40e102d0
+#define	GPIO24		0x40e102d4
+#define	GPIO25		0x40e102d8
+#define	GPIO26		0x40e102dc
+
+#define	GPIO27		0x40e10400
+#define	GPIO28		0x40e10404
+#define	GPIO29		0x40e10408
+#define	GPIO30		0x40e1040c
+#define	GPIO31		0x40e10410
+#define	GPIO32		0x40e10414
+#define	GPIO33		0x40e10418
+#define	GPIO34		0x40e1041c
+#define	GPIO35		0x40e10420
+#define	GPIO36		0x40e10424
+#define	GPIO37		0x40e10428
+#define	GPIO38		0x40e1042c
+#define	GPIO39		0x40e10430
+#define	GPIO40		0x40e10434
+#define	GPIO41		0x40e10438
+#define	GPIO42		0x40e1043c
+#define	GPIO43		0x40e10440
+#define	GPIO44		0x40e10444
+#define	GPIO45		0x40e10448
+#define	GPIO46		0x40e1044c
+#define	GPIO47		0x40e10450
+#define	GPIO48		0x40e10454
+#define	GPIO49		0x40e1045c
+#define	GPIO50		0x40e10460
+#define	GPIO51		0x40e10464
+#define	GPIO52		0x40e10468
+#define	GPIO53		0x40e1046c
+#define	GPIO54		0x40e10470
+#define	GPIO55		0x40e10474
+#define	GPIO56		0x40e10478
+#define	GPIO57		0x40e1047c
+#define	GPIO58		0x40e10480
+#define	GPIO59		0x40e10484
+#define	GPIO60		0x40e10488
+#define	GPIO61		0x40e1048c
+#define	GPIO62		0x40e10490
+
+#define	GPIO6_2		0x40e10494
+#define	GPIO7_2		0x40e10498
+#define	GPIO8_2		0x40e1049c
+#define	GPIO9_2		0x40e104a0
+#define	GPIO10_2	0x40e104a4
+#define	GPIO11_2	0x40e104a8
+#define	GPIO12_2	0x40e104ac
+#define	GPIO13_2	0x40e104b0
+
+#define	GPIO63		0x40e104b4
+#define	GPIO64		0x40e104b8
+#define	GPIO65		0x40e104bc
+#define	GPIO66		0x40e104c0
+#define	GPIO67		0x40e104c4
+#define	GPIO68		0x40e104c8
+#define	GPIO69		0x40e104cc
+#define	GPIO70		0x40e104d0
+#define	GPIO71		0x40e104d4
+#define	GPIO72		0x40e104d8
+#define	GPIO73		0x40e104dc
+
+#define	GPIO14_2	0x40e104e0
+#define	GPIO15_2	0x40e104e4
+#define	GPIO16_2	0x40e104e8
+#define	GPIO17_2	0x40e104ec
+
+#define	GPIO74		0x40e104f0
+#define	GPIO75		0x40e104f4
+#define	GPIO76		0x40e104f8
+#define	GPIO77		0x40e104fc
+#define	GPIO78		0x40e10500
+#define	GPIO79		0x40e10504
+#define	GPIO80		0x40e10508
+#define	GPIO81		0x40e1050c
+#define	GPIO82		0x40e10510
+#define	GPIO83		0x40e10514
+#define	GPIO84		0x40e10518
+#define	GPIO85		0x40e1051c
+#define	GPIO86		0x40e10520
+#define	GPIO87		0x40e10524
+#define	GPIO88		0x40e10528
+#define	GPIO89		0x40e1052c
+#define	GPIO90		0x40e10530
+#define	GPIO91		0x40e10534
+#define	GPIO92		0x40e10538
+#define	GPIO93		0x40e1053c
+#define	GPIO94		0x40e10540
+#define	GPIO95		0x40e10544
+#define	GPIO96		0x40e10548
+#define	GPIO97		0x40e1054c
+#define	GPIO98		0x40e10550
+
+#define	GPIO99		0x40e10600
+#define	GPIO100		0x40e10604
+#define	GPIO101		0x40e10608
+#define	GPIO102		0x40e1060c
+#define	GPIO103		0x40e10610
+#define	GPIO104		0x40e10614
+#define	GPIO105		0x40e10618
+#define	GPIO106		0x40e1061c
+#define	GPIO107		0x40e10620
+#define	GPIO108		0x40e10624
+#define	GPIO109		0x40e10628
+#define	GPIO110		0x40e1062c
+#define	GPIO111		0x40e10630
+#define	GPIO112		0x40e10634
+
+#define	GPIO113		0x40e10638
+#define	GPIO114		0x40e1063c
+#define	GPIO115		0x40e10640
+#define	GPIO116		0x40e10644
+#define	GPIO117		0x40e10648
+#define	GPIO118		0x40e1064c
+#define	GPIO119		0x40e10650
+#define	GPIO120		0x40e10654
+#define	GPIO121		0x40e10658
+#define	GPIO122		0x40e1065c
+#define	GPIO123		0x40e10660
+#define	GPIO124		0x40e10664
+#define	GPIO125		0x40e10668
+#define	GPIO126		0x40e1066c
+#define	GPIO127		0x40e10670
+
+#define	GPIO0_2		0x40e10674
+#define	GPIO1_2		0x40e10678
+#define	GPIO2_2		0x40e1067c
+#define	GPIO3_2		0x40e10680
+#define	GPIO4_2		0x40e10684
+#define	GPIO5_2		0x40e10688
+
+/* PXA300 and PXA310 */
+#elif	defined(CONFIG_CPU_PXA300) || defined(CONFIG_CPU_PXA310)
+#define	DF_IO0		0x40e10220
+#define	DF_IO1		0x40e10228
+#define	DF_IO2		0x40e10230
+#define	DF_IO3		0x40e10238
+#define	DF_IO4		0x40e10258
+#define	DF_IO5		0x40e10260
+#define	DF_IO7		0x40e10270
+#define	DF_IO6		0x40e10268
+#define	DF_IO8		0x40e10224
+#define	DF_IO9		0x40e1022c
+#define	DF_IO10		0x40e10234
+#define	DF_IO11		0x40e1023c
+#define	DF_IO12		0x40e1025c
+#define	DF_IO13		0x40e10264
+#define	DF_IO14		0x40e1026c
+#define	DF_IO15		0x40e10274
+#define	DF_CLE_NOE	0x40e10240
+#define	DF_ALE_nWE	0x40e1020c
+#define	DF_SCLK_E	0x40e10250
+#define	nCS0		0x40e100c4
+#define	nCS1		0x40e100c0
+#define	nBE0		0x40e10204
+#define	nBE1		0x40e10208
+#define	nLUA		0x40e10244
+#define	nLLA		0x40e10254
+#define	DF_ADDR0	0x40e10210
+#define	DF_ADDR1	0x40e10214
+#define	DF_ADDR2	0x40e10218
+#define	DF_ADDR3	0x40e1021c
+#define	DF_INT_RnB	0x40e100c8
+#define	DF_nCS0		0x40e10248
+#define	DF_nCS1		0x40e10278
+#define	DF_nWE		0x40e100cc
+#define	DF_nRE		0x40e10200
+
+#define	GPIO0		0x40e100b4
+#define	GPIO1		0x40e100b8
+#define	GPIO2		0x40e100bc
+#define	GPIO3		0x40e1027c
+#define	GPIO4		0x40e10280
+
+#define	GPIO5		0x40e10284
+#define	GPIO6		0x40e10288
+#define	GPIO7		0x40e1028c
+#define	GPIO8		0x40e10290
+#define	GPIO9		0x40e10294
+#define	GPIO10		0x40e10298
+#define	GPIO11		0x40e1029c
+#define	GPIO12		0x40e102a0
+#define	GPIO13		0x40e102a4
+#define	GPIO14		0x40e102a8
+#define	GPIO15		0x40e102ac
+#define	GPIO16		0x40e102b0
+#define	GPIO17		0x40e102b4
+#define	GPIO18		0x40e102b8
+#define	GPIO19		0x40e102bc
+#define	GPIO20		0x40e102c0
+#define	GPIO21		0x40e102c4
+#define	GPIO22		0x40e102c8
+#define	GPIO23		0x40e102cc
+#define	GPIO24		0x40e102d0
+#define	GPIO25		0x40e102d4
+#define	GPIO26		0x40e102d8
+
+#define	GPIO27		0x40e10400
+#define	GPIO28		0x40e10404
+#define	GPIO29		0x40e10408
+#define	ULPI_STP	0x40e1040c
+#define	ULPI_NXT	0x40e10410
+#define	ULPI_DIR	0x40e10414
+#define	GPIO30		0x40e10418
+#define	GPIO31		0x40e1041c
+#define	GPIO32		0x40e10420
+#define	GPIO33		0x40e10424
+#define	GPIO34		0x40e10428
+#define	GPIO35		0x40e1042c
+#define	GPIO36		0x40e10430
+#define	GPIO37		0x40e10434
+#define	GPIO38		0x40e10438
+#define	GPIO39		0x40e1043c
+#define	GPIO40		0x40e10440
+#define	GPIO41		0x40e10444
+#define	GPIO42		0x40e10448
+#define	GPIO43		0x40e1044c
+#define	GPIO44		0x40e10450
+#define	GPIO45		0x40e10454
+#define	GPIO46		0x40e10458
+#define	GPIO47		0x40e1045c
+#define	GPIO48		0x40e10460
+
+#define	GPIO49		0x40e10464
+#define	GPIO50		0x40e10468
+#define	GPIO51		0x40e1046c
+#define	GPIO52		0x40e10470
+#define	GPIO53		0x40e10474
+#define	GPIO54		0x40e10478
+#define	GPIO55		0x40e1047c
+#define	GPIO56		0x40e10480
+#define	GPIO57		0x40e10484
+#define	GPIO58		0x40e10488
+#define	GPIO59		0x40e1048c
+#define	GPIO60		0x40e10490
+#define	GPIO61		0x40e10494
+#define	GPIO62		0x40e10498
+#define	GPIO63		0x40e1049c
+#define	GPIO64		0x40e104a0
+#define	GPIO65		0x40e104a4
+#define	GPIO66		0x40e104a8
+#define	GPIO67		0x40e104ac
+#define	GPIO68		0x40e104b0
+#define	GPIO69		0x40e104b4
+#define	GPIO70		0x40e104b8
+#define	GPIO71		0x40e104bc
+#define	GPIO72		0x40e104c0
+#define	GPIO73		0x40e104c4
+#define	GPIO74		0x40e104c8
+#define	GPIO75		0x40e104cc
+#define	GPIO76		0x40e104d0
+#define	GPIO77		0x40e104d4
+#define	GPIO78		0x40e104d8
+#define	GPIO79		0x40e104dc
+#define	GPIO80		0x40e104e0
+#define	GPIO81		0x40e104e4
+#define	GPIO82		0x40e104e8
+#define	GPIO83		0x40e104ec
+#define	GPIO84		0x40e104f0
+#define	GPIO85		0x40e104f4
+#define	GPIO86		0x40e104f8
+#define	GPIO87		0x40e104fc
+#define	GPIO88		0x40e10500
+#define	GPIO89		0x40e10504
+#define	GPIO90		0x40e10508
+#define	GPIO91		0x40e1050c
+#define	GPIO92		0x40e10510
+#define	GPIO93		0x40e10514
+#define	GPIO94		0x40e10518
+#define	GPIO95		0x40e1051c
+#define	GPIO96		0x40e10520
+#define	GPIO97		0x40e10524
+#define	GPIO98		0x40e10528
+
+#define	GPIO99		0x40e10600
+#define	GPIO100		0x40e10604
+#define	GPIO101		0x40e10608
+#define	GPIO102		0x40e1060c
+#define	GPIO103		0x40e10610
+#define	GPIO104		0x40e10614
+#define	GPIO105		0x40e10618
+#define	GPIO106		0x40e1061c
+#define	GPIO107		0x40e10620
+#define	GPIO108		0x40e10624
+#define	GPIO109		0x40e10628
+#define	GPIO110		0x40e1062c
+#define	GPIO111		0x40e10630
+#define	GPIO112		0x40e10634
+
+#define	GPIO113		0x40e10638
+#define	GPIO114		0x40e1063c
+#define	GPIO115		0x40e10640
+#define	GPIO116		0x40e10644
+#define	GPIO117		0x40e10648
+#define	GPIO118		0x40e1064c
+#define	GPIO119		0x40e10650
+#define	GPIO120		0x40e10654
+#define	GPIO121		0x40e10658
+#define	GPIO122		0x40e1065c
+#define	GPIO123		0x40e10660
+#define	GPIO124		0x40e10664
+#define	GPIO125		0x40e10668
+#define	GPIO126		0x40e1066c
+#define	GPIO127		0x40e10670
+
+#define	GPIO0_2		0x40e10674
+#define	GPIO1_2		0x40e10678
+#define	GPIO2_2		0x40e102dc
+#define	GPIO3_2		0x40e102e0
+#define	GPIO4_2		0x40e102e4
+#define	GPIO5_2		0x40e102e8
+#define	GPIO6_2		0x40e102ec
+
+#ifndef	CONFIG_CPU_PXA300	/* PXA310 only */
+#define	GPIO7_2		0x40e1052c
+#define	GPIO8_2		0x40e10530
+#define	GPIO9_2		0x40e10534
+#define	GPIO10_2	0x40e10538
+#endif
+#endif
+
+#ifdef CONFIG_CPU_MONAHANS
+/* MFPR Bit Definitions, see 4-10, Vol. 1 */
+#define PULL_SEL	0x8000
+#define PULLUP_EN	0x4000
+#define PULLDOWN_EN	0x2000
+
+#define DRIVE_FAST_1mA	0x0
+#define DRIVE_FAST_2mA	0x400
+#define DRIVE_FAST_3mA	0x800
+#define DRIVE_FAST_4mA	0xC00
+#define DRIVE_SLOW_6mA	0x1000
+#define DRIVE_FAST_6mA	0x1400
+#define DRIVE_SLOW_10mA	0x1800
+#define DRIVE_FAST_10mA	0x1C00
+
+#define SLEEP_SEL	0x200
+#define SLEEP_DATA	0x100
+#define SLEEP_OE_N	0x80
+#define EDGE_CLEAR	0x40
+#define EDGE_FALL_EN	0x20
+#define EDGE_RISE_EN	0x10
+
+#define AF_SEL_0	0x0	/* Alternate function 0 (reset state) */
+#define AF_SEL_1	0x1	/* Alternate function 1 */
+#define AF_SEL_2	0x2	/* Alternate function 2 */
+#define AF_SEL_3	0x3	/* Alternate function 3 */
+#define AF_SEL_4	0x4	/* Alternate function 4 */
+#define AF_SEL_5	0x5	/* Alternate function 5 */
+#define AF_SEL_6	0x6	/* Alternate function 6 */
+#define AF_SEL_7	0x7	/* Alternate function 7 */
+
+#endif /* CONFIG_CPU_MONAHANS */
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST		1	/* reset */
+#define GPIO6_MMCCLK		6	/* MMC Clock */
+#define GPIO8_48MHz		7	/* 48 MHz clock output */
+#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
+#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
+#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
+#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
+#define GPIO12_32KHz		12	/* 32 kHz out */
+#define GPIO13_MBGNT		13	/* memory controller grant */
+#define GPIO14_MBREQ		14	/* alternate bus master request */
+#define GPIO15_nCS_1		15	/* chip select 1 */
+#define GPIO16_PWM0		16	/* PWM0 output */
+#define GPIO17_PWM1		17	/* PWM1 output */
+#define GPIO18_RDY		18	/* Ext. Bus Ready */
+#define GPIO19_DREQ1		19	/* External DMA Request */
+#define GPIO20_DREQ0		20	/* External DMA Request */
+#define GPIO23_SCLK		23	/* SSP clock */
+#define GPIO24_SFRM		24	/* SSP Frame */
+#define GPIO25_STXD		25	/* SSP transmit */
+#define GPIO26_SRXD		26	/* SSP receive */
+#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
+#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
+#define GPIO31_SYNC		31	/* AC97/I2S sync */
+#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
+#define GPIO33_nCS_5		33	/* chip select 5 */
+#define GPIO34_FFRXD		34	/* FFUART receive */
+#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
+#define GPIO35_FFCTS		35	/* FFUART Clear to send */
+#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
+#define GPIO37_FFDSR		37	/* FFUART data set ready */
+#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
+#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
+#define GPIO39_FFTXD		39	/* FFUART transmit data */
+#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
+#define GPIO41_FFRTS		41	/* FFUART request to send */
+#define GPIO42_BTRXD		42	/* BTUART receive data */
+#define GPIO43_BTTXD		43	/* BTUART transmit data */
+#define GPIO44_BTCTS		44	/* BTUART clear to send */
+#define GPIO45_BTRTS		45	/* BTUART request to send */
+#define GPIO46_ICPRXD		46	/* ICP receive data */
+#define GPIO46_STRXD		46	/* STD_UART receive data */
+#define GPIO47_ICPTXD		47	/* ICP transmit data */
+#define GPIO47_STTXD		47	/* STD_UART transmit data */
+#define GPIO48_nPOE		48	/* Output Enable for Card Space */
+#define GPIO49_nPWE		49	/* Write Enable for Card Space */
+#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
+#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
+#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
+#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
+#define GPIO53_MMCCLK		53	/* MMC Clock */
+#define GPIO54_MMCCLK		54	/* MMC Clock */
+#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
+#define GPIO55_nPREG		55	/* Card Address bit 26 */
+#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
+#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0		58	/* LCD data pin 0 */
+#define GPIO59_LDD_1		59	/* LCD data pin 1 */
+#define GPIO60_LDD_2		60	/* LCD data pin 2 */
+#define GPIO61_LDD_3		61	/* LCD data pin 3 */
+#define GPIO62_LDD_4		62	/* LCD data pin 4 */
+#define GPIO63_LDD_5		63	/* LCD data pin 5 */
+#define GPIO64_LDD_6		64	/* LCD data pin 6 */
+#define GPIO65_LDD_7		65	/* LCD data pin 7 */
+#define GPIO66_LDD_8		66	/* LCD data pin 8 */
+#define GPIO66_MBREQ		66	/* alternate bus master req */
+#define GPIO67_LDD_9		67	/* LCD data pin 9 */
+#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
+#define GPIO68_LDD_10		68	/* LCD data pin 10 */
+#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
+#define GPIO69_LDD_11		69	/* LCD data pin 11 */
+#define GPIO69_MMCCLK		69	/* MMC_CLK */
+#define GPIO70_LDD_12		70	/* LCD data pin 12 */
+#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13		71	/* LCD data pin 13 */
+#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14		72	/* LCD data pin 14 */
+#define GPIO72_32kHz		72	/* 32 kHz clock */
+#define GPIO73_LDD_15		73	/* LCD data pin 15 */
+#define GPIO73_MBGNT		73	/* Memory controller grant */
+#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
+#define GPIO75_LCD_LCLK		75	/* LCD line clock */
+#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
+#define GPIO78_nCS_2		78	/* chip select 2 */
+#define GPIO79_nCS_3		79	/* chip select 3 */
+#define GPIO80_nCS_4		80	/* chip select 4 */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN			0x000
+#define GPIO_OUT		0x080
+#define GPIO_ALT_FN_1_IN	0x100
+#define GPIO_ALT_FN_1_OUT	0x180
+#define GPIO_ALT_FN_2_IN	0x200
+#define GPIO_ALT_FN_2_OUT	0x280
+#define GPIO_ALT_FN_3_IN	0x300
+#define GPIO_ALT_FN_3_OUT	0x380
+#define GPIO_MD_MASK_NR		0x07f
+#define GPIO_MD_MASK_DIR	0x080
+#define GPIO_MD_MASK_FN		0x300
+
+#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_48MHz_MD		( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
+#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
+#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_SCLK_md		(23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
+#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
+#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
+#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
+#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
+#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
+#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
+#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
+#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
+#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
+#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
+#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
+#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
+
+#define GPIO117_SCL		(117 | GPIO_ALT_FN_1_OUT)
+#define GPIO118_SDA		(118 | GPIO_ALT_FN_1_OUT)
+
+/*
+ * Power Manager
+ */
+#ifdef CONFIG_CPU_MONAHANS
+
+#define ASCR		0x40F40000  /* Application Subsystem Power Status/Control Register */
+#define ARSR		0x40F40004  /* Application Subsystem Reset Status Register */
+#define AD3ER		0x40F40008  /* Application Subsystem D3 state Wakeup Enable Register */
+#define AD3SR		0x40F4000C  /* Application Subsystem D3 state Wakeup Status Register */
+#define AD2D0ER		0x40F40010  /* Application Subsystem D2 to D0 state Wakeup Enable Register */
+#define AD2D0SR		0x40F40014  /* Application Subsystem D2 to D0 state Wakeup Status Register */
+#define AD2D1ER		0x40F40018  /* Application Subsystem D2 to D1 state Wakeup Enable Register */
+#define AD2D1SR		0x40F4001C  /* Application Subsystem D2 to D1 state Wakeup Status Register */
+#define AD1D0ER		0x40F40020  /* Application Subsystem D1 to D0 state Wakeup Enable Register */
+#define AD1D0SR		0x40F40024  /* Application Subsystem D1 to D0 state Wakeup Status Register */
+#define ASDCNT		0x40F40028  /* Application Subsystem SRAM Drowsy Count Register */
+#define AD3R		0x40F40030  /* Application Subsystem D3 State Configuration Register */
+#define AD2R		0x40F40034  /* Application Subsystem D2 State Configuration Register */
+#define AD1R		0x40F40038  /* Application Subsystem D1 State Configuration Register */
+
+#define PMCR		0x40F50000  /* Power Manager Control Register */
+#define PSR		0x40F50004  /* Power Manager S2 Status Register */
+#define PSPR		0x40F50008  /* Power Manager Scratch Pad Register */
+#define PCFR		0x40F5000C  /* Power Manager General Configuration Register */
+#define PWER		0x40F50010  /* Power Manager Wake-up Enable Register */
+#define PWSR		0x40F50014  /* Power Manager Wake-up Status Register */
+#define PECR		0x40F50018  /* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR		0x40F50080  /* DC-DC Controller Status Register */
+#define PVCR		0x40F50100  /* Power Manager Voltage Change Control Register */
+#define    PCMD(x) (0x40F50110 + x*4)
+#define    PCMD0   (0x40F50110 + 0 * 4)
+#define    PCMD1   (0x40F50110 + 1 * 4)
+#define    PCMD2   (0x40F50110 + 2 * 4)
+#define    PCMD3   (0x40F50110 + 3 * 4)
+#define    PCMD4   (0x40F50110 + 4 * 4)
+#define    PCMD5   (0x40F50110 + 5 * 4)
+#define    PCMD6   (0x40F50110 + 6 * 4)
+#define    PCMD7   (0x40F50110 + 7 * 4)
+#define    PCMD8   (0x40F50110 + 8 * 4)
+#define    PCMD9   (0x40F50110 + 9 * 4)
+#define    PCMD10  (0x40F50110 + 10 * 4)
+#define    PCMD11  (0x40F50110 + 11 * 4)
+#define    PCMD12  (0x40F50110 + 12 * 4)
+#define    PCMD13  (0x40F50110 + 13 * 4)
+#define    PCMD14  (0x40F50110 + 14 * 4)
+#define    PCMD15  (0x40F50110 + 15 * 4)
+#define    PCMD16  (0x40F50110 + 16 * 4)
+#define    PCMD17  (0x40F50110 + 17 * 4)
+#define    PCMD18  (0x40F50110 + 18 * 4)
+#define    PCMD19  (0x40F50110 + 19 * 4)
+#define    PCMD20  (0x40F50110 + 20 * 4)
+#define    PCMD21  (0x40F50110 + 21 * 4)
+#define    PCMD22  (0x40F50110 + 22 * 4)
+#define    PCMD23  (0x40F50110 + 23 * 4)
+#define    PCMD24  (0x40F50110 + 24 * 4)
+#define    PCMD25  (0x40F50110 + 25 * 4)
+#define    PCMD26  (0x40F50110 + 26 * 4)
+#define    PCMD27  (0x40F50110 + 27 * 4)
+#define    PCMD28  (0x40F50110 + 28 * 4)
+#define    PCMD29  (0x40F50110 + 29 * 4)
+#define    PCMD30  (0x40F50110 + 30 * 4)
+#define    PCMD31  (0x40F50110 + 31 * 4)
+
+#define    PCMD_MBC    (1<<12)
+#define    PCMD_DCE    (1<<11)
+#define    PCMD_LC     (1<<10)
+#define    PCMD_SQC    (3<<8)  /* only 00 and 01 are valid */
+
+#define PVCR_FVC                   (0x1 << 28)
+#define PVCR_VCSA                  (0x1<<14)
+#define PVCR_CommandDelay          (0xf80)
+#define PVCR_ReadPointer           0x01f00000
+#define PVCR_SlaveAddress          (0x7f)
+
+#else /* ifdef CONFIG_CPU_MONAHANS */
+
+#define PMCR		0x40F00000  /* Power Manager Control Register */
+#define PSSR		0x40F00004  /* Power Manager Sleep Status Register */
+#define PSPR		0x40F00008  /* Power Manager Scratch Pad Register */
+#define PWER		0x40F0000C  /* Power Manager Wake-up Enable Register */
+#define PRER		0x40F00010  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER		0x40F00014  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR		0x40F00018  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR		0x40F0001C  /* Power Manager General Configuration Register */
+#define PGSR0		0x40F00020  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1		0x40F00024  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2		0x40F00028  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3		0x40F0002C  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR		0x40F00030  /* Reset Controller Status Register */
+
+#define	   PSLR	   0x40F00034	/* Power Manager Sleep Config Register */
+#define	   PSTR	   0x40F00038	/* Power Manager Standby Config Register */
+#define	   PSNR	   0x40F0003C	/* Power Manager Sense Config Register */
+#define	   PVCR	   0x40F00040	/* Power Manager VoltageControl Register */
+#define	   PKWR	   0x40F00050	/* Power Manager KB Wake-up Enable Reg */
+#define	   PKSR	   0x40F00054	/* Power Manager KB Level-Detect Register */
+#define	   PCMD(x) (0x40F00080 + x*4)
+#define	   PCMD0   (0x40F00080 + 0 * 4)
+#define	   PCMD1   (0x40F00080 + 1 * 4)
+#define	   PCMD2   (0x40F00080 + 2 * 4)
+#define	   PCMD3   (0x40F00080 + 3 * 4)
+#define	   PCMD4   (0x40F00080 + 4 * 4)
+#define	   PCMD5   (0x40F00080 + 5 * 4)
+#define	   PCMD6   (0x40F00080 + 6 * 4)
+#define	   PCMD7   (0x40F00080 + 7 * 4)
+#define	   PCMD8   (0x40F00080 + 8 * 4)
+#define	   PCMD9   (0x40F00080 + 9 * 4)
+#define	   PCMD10  (0x40F00080 + 10 * 4)
+#define	   PCMD11  (0x40F00080 + 11 * 4)
+#define	   PCMD12  (0x40F00080 + 12 * 4)
+#define	   PCMD13  (0x40F00080 + 13 * 4)
+#define	   PCMD14  (0x40F00080 + 14 * 4)
+#define	   PCMD15  (0x40F00080 + 15 * 4)
+#define	   PCMD16  (0x40F00080 + 16 * 4)
+#define	   PCMD17  (0x40F00080 + 17 * 4)
+#define	   PCMD18  (0x40F00080 + 18 * 4)
+#define	   PCMD19  (0x40F00080 + 19 * 4)
+#define	   PCMD20  (0x40F00080 + 20 * 4)
+#define	   PCMD21  (0x40F00080 + 21 * 4)
+#define	   PCMD22  (0x40F00080 + 22 * 4)
+#define	   PCMD23  (0x40F00080 + 23 * 4)
+#define	   PCMD24  (0x40F00080 + 24 * 4)
+#define	   PCMD25  (0x40F00080 + 25 * 4)
+#define	   PCMD26  (0x40F00080 + 26 * 4)
+#define	   PCMD27  (0x40F00080 + 27 * 4)
+#define	   PCMD28  (0x40F00080 + 28 * 4)
+#define	   PCMD29  (0x40F00080 + 29 * 4)
+#define	   PCMD30  (0x40F00080 + 30 * 4)
+#define	   PCMD31  (0x40F00080 + 31 * 4)
+
+#define	   PCMD_MBC    (1<<12)
+#define	   PCMD_DCE    (1<<11)
+#define	   PCMD_LC     (1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define	   PCMD_SQC    (3<<8)  /* currently only bit 8 is changerable, */
+				/* bit 9 should be 0 all day. */
+#define PVCR_VCSA		   (0x1<<14)
+#define PVCR_CommandDelay	   (0xf80)
+/* define MACRO for Power Manager General Configuration Register (PCFR) */
+#define PCFR_FVC		   (0x1 << 10)
+#define PCFR_PI2C_EN		   (0x1 << 6)
+
+#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
+#endif /* CONFIG_CPU_MONAHANS */
+
+/*
+ * SSP Serial Port Registers
+ */
+#define SSCR0		0x41000000  /* SSP Control Register 0 */
+#define SSCR1		0x41000004  /* SSP Control Register 1 */
+#define SSSR		0x41000008  /* SSP Status Register */
+#define SSITR		0x4100000C  /* SSP Interrupt Test Register */
+#define SSDR		0x41000010  /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
+
+/*
+ * MultiMediaCard (MMC) controller
+ */
+#define MMC_STRPCL	0x41100000  /* Control to start and stop MMC clock */
+#define MMC_STAT	0x41100004  /* MMC Status Register (read only) */
+#define MMC_CLKRT	0x41100008  /* MMC clock rate */
+#define MMC_SPI		0x4110000c  /* SPI mode control bits */
+#define MMC_CMDAT	0x41100010  /* Command/response/data sequence control */
+#define MMC_RESTO	0x41100014  /* Expected response time out */
+#define MMC_RDTO	0x41100018  /* Expected data read time out */
+#define MMC_BLKLEN	0x4110001c  /* Block length of data transaction */
+#define MMC_NOB		0x41100020  /* Number of blocks, for block mode */
+#define MMC_PRTBUF	0x41100024  /* Partial MMC_TXFIFO FIFO written */
+#define MMC_I_MASK	0x41100028  /* Interrupt Mask */
+#define MMC_I_REG	0x4110002c  /* Interrupt Register (read only) */
+#define MMC_CMD		0x41100030  /* Index of current command */
+#define MMC_ARGH	0x41100034  /* MSW part of the current command argument */
+#define MMC_ARGL	0x41100038  /* LSW part of the current command argument */
+#define MMC_RES		0x4110003c  /* Response FIFO (read only) */
+#define MMC_RXFIFO	0x41100040  /* Receive FIFO (read only) */
+#define MMC_TXFIFO	0x41100044  /* Transmit FIFO (write only) */
+
+
+/*
+ * LCD
+ */
+#define LCCR0		0x44000000  /* LCD Controller Control Register 0 */
+#define LCCR1		0x44000004  /* LCD Controller Control Register 1 */
+#define LCCR2		0x44000008  /* LCD Controller Control Register 2 */
+#define LCCR3		0x4400000C  /* LCD Controller Control Register 3 */
+#define DFBR0		0x44000020  /* DMA Channel 0 Frame Branch Register */
+#define DFBR1		0x44000024  /* DMA Channel 1 Frame Branch Register */
+#define LCSR0		0x44000038  /* LCD Controller Status Register */
+#define LCSR1		0x44000034  /* LCD Controller Status Register */
+#define LIIDR		0x4400003C  /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	0x44000040  /* TMED RGB Seed Register */
+#define TMEDCR		0x44000044  /* TMED Control Register */
+
+#define FDADR0		0x44000200  /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0		0x44000204  /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0		0x44000208  /* DMA Channel 0 Frame ID Register */
+#define LDCMD0		0x4400020C  /* DMA Channel 0 Command Register */
+#define FDADR1		0x44000210  /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1		0x44000214  /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1		0x44000218  /* DMA Channel 1 Frame ID Register */
+#define LDCMD1		0x4400021C  /* DMA Channel 1 Command Register */
+
+#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
+#define LCCR0_CMS	(1 << 1)	/* Color = 0, Monochrome = 1 */
+#define LCCR0_SDS	(1 << 2)	/* Single Panel = 0, Dual Panel = 1 */
+#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
+#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
+#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
+#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
+#define LCCR0_PAS	(1 << 7)	/* Passive = 0, Active = 1 */
+#define LCCR0_BLE	(1 << 8)	/* Little Endian = 0, Big Endian = 1 */
+#define LCCR0_DPD	(1 << 9)	/* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */
+#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
+#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
+#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
+#define LCCR0_PDD_S	12
+#define LCCR0_BM	(1 << 20)	/* Branch mask */
+#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+#if defined(CONFIG_CPU_PXA27X)
+#define LCCR0_LCDT	(1 << 22)	/* LCD Panel Type */
+#define LCCR0_RDSTM	(1 << 23)	/* Read Status Interrupt Mask */
+#define LCCR0_CMDIM	(1 << 24)	/* Command Interrupt Mask */
+#endif
+
+#define LCCR1_PPL	Fld (10, 0)	 /* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)		/* Display Width [1..800 pix.]	*/ \
+			(((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization	  */
+#define LCCR1_HorSnchWdth(Tpix)		/* Horizontal Synchronization	  */ \
+					/* pulse Width [1..64 Tpix]	  */ \
+			(((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait	   */
+					/* count - 1 [Tpix]		   */
+#define LCCR1_EndLnDel(Tpix)		/*  End-of-Line Delay		   */ \
+					/*  [1..256 Tpix]		   */ \
+			(((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock   */
+					/* Wait count - 1 [Tpix]	   */
+#define LCCR1_BegLnDel(Tpix)		/*  Beginning-of-Line Delay	   */ \
+					/*  [1..256 Tpix]		   */ \
+			(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1		   */
+#define LCCR2_DisHght(Line)		/*  Display Height [1..1024 lines] */ \
+			(((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse  */
+					/* Width - 1 [Tln] (L_FCLK)	   */
+#define LCCR2_VrtSnchWdth(Tln)		/*  Vertical Synchronization pulse */ \
+					/*  Width [1..64 Tln]		   */ \
+			(((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait	   */
+					/* count [Tln]			   */
+#define LCCR2_EndFrmDel(Tln)		/*  End-of-Frame Delay		   */ \
+					/*  [0..255 Tln]		   */ \
+			((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock   */
+					/* Wait count [Tln]		   */
+#define LCCR2_BegFrmDel(Tln)		/*  Beginning-of-Frame Delay	   */ \
+					/*  [0..255 Tln]		   */ \
+			((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S	16
+#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
+#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
+#define LCCR3_PCP	(1 << 22)	/* pixel clock polarity */
+#define LCCR3_OEP	(1 << 23)	/* output enable polarity */
+#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
+
+#define LCCR3_PDFOR_0	 (0 << 30)
+#define LCCR3_PDFOR_1	 (1 << 30)
+#define LCCR3_PDFOR_2	 (2 << 30)
+#define LCCR3_PDFOR_3	 (3 << 30)
+
+
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)		/* Pixel Clock Divisor */ \
+			(((Div) << FShft (LCCR3_PCD)))
+
+
+#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)			/* Bit Per Pixel */ \
+			((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26)))
+
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
+#define LCCR3_Acb(Acb)			/* BAC Bias */ \
+			(((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  Horizontal Synchronization	   */
+					/*  pulse active High		   */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  Horizontal Synchronization	   */
+
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  Vertical Synchronization pulse */
+					/*  active High			   */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  Vertical Synchronization pulse */
+					/*  active Low			   */
+
+#define LCSR0_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR0_SOF	(1 << 1)	/* Start of frame */
+#define LCSR0_BER	(1 << 2)	/* Bus error */
+#define LCSR0_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR0_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR0_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR0_OU	(1 << 6)	/* output FIFO underrun */
+#define LCSR0_QD	(1 << 7)	/* quick disable */
+#define LCSR0_EOF0	(1 << 8)	/* end of frame */
+#define LCSR0_BS	(1 << 9)	/* branch status */
+#define LCSR0_SINT	(1 << 10)	/* subsequent interrupt */
+
+#define LCSR1_SOF1	(1 << 0)
+#define LCSR1_SOF2	(1 << 1)
+#define LCSR1_SOF3	(1 << 2)
+#define LCSR1_SOF4	(1 << 3)
+#define LCSR1_SOF5	(1 << 4)
+#define LCSR1_SOF6	(1 << 5)
+
+#define LCSR1_EOF1	(1 << 8)
+#define LCSR1_EOF2	(1 << 9)
+#define LCSR1_EOF3	(1 << 10)
+#define LCSR1_EOF4	(1 << 11)
+#define LCSR1_EOF5	(1 << 12)
+#define LCSR1_EOF6	(1 << 13)
+
+#define LCSR1_BS1	(1 << 16)
+#define LCSR1_BS2	(1 << 17)
+#define LCSR1_BS3	(1 << 18)
+#define LCSR1_BS4	(1 << 19)
+#define LCSR1_BS5	(1 << 20)
+#define LCSR1_BS6	(1 << 21)
+
+#define LCSR1_IU2	(1 << 25)
+#define LCSR1_IU3	(1 << 26)
+#define LCSR1_IU4	(1 << 27)
+#define LCSR1_IU5	(1 << 28)
+#define LCSR1_IU6	(1 << 29)
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+#if defined(CONFIG_CPU_PXA27X)
+#define LDCMD_SOFINT	(1 << 22)
+#define LDCMD_EOFINT	(1 << 21)
+#endif
+
+/*
+ * Memory controller
+ */
+
+#ifdef CONFIG_CPU_MONAHANS
+
+/* PXA3xx */
+
+/* Static Memory Controller Registers */
+#define	MSC0		0x4A000008 /* Static Memory Control Register 0 */
+#define	MSC1		0x4A00000C /* Static Memory Control Register 1 */
+#define	MECR		0x4A000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define	SXCNFG		0x4A00001C /* Synchronous Static Memory Control Register */
+#define	MCMEM0		0x4A000028 /* Card interface Common Memory Space Socket 0 Timing */
+#define	MCATT0		0x4A000030 /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define	MCIO0		0x4A000038 /* Card interface I/O Space Socket 0 Timing Configuration */
+#define	MEMCLKCFG	0x4A000068 /* SCLK speed configuration */
+#define	CSADRCFG0	0x4A000080 /* Address Configuration for chip select 0 */
+#define	CSADRCFG1	0x4A000084 /* Address Configuration for chip select 1 */
+#define	CSADRCFG2	0x4A000088 /* Address Configuration for chip select 2 */
+#define	CSADRCFG3	0x4A00008C /* Address Configuration for chip select 3 */
+#define	CSADRCFG_P	0x4A000090 /* Address Configuration for pcmcia card interface */
+#define	CSMSADRCFG	0x4A0000A0 /* Master Address Configuration Register */
+#define	CLK_RET_DEL	0x4A0000B0 /* Delay line and mux selects for return data latching for sync. flash */
+#define	ADV_RET_DEL	0x4A0000B4 /* Delay line and mux selects for return data latching for sync. flash */
+
+/* Dynamic Memory Controller Registers */
+#define	MDCNFG		0x48100000 /* SDRAM Configuration Register 0 */
+#define	MDREFR		0x48100004 /* SDRAM Refresh Control Register */
+#define	FLYCNFG		0x48100020 /* Fly-by DMA DVAL[1:0] polarities */
+#define	MDMRS		0x48100040 /* MRS value to be written to SDRAM */
+#define	DDR_SCAL	0x48100050 /* Software Delay Line Calibration/Configuration for external DDR memory. */
+#define	DDR_HCAL	0x48100060 /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
+#define	DDR_WCAL	0x48100068 /* DDR Write Strobe Calibration Register */
+#define	DMCIER		0x48100070 /* Dynamic MC Interrupt Enable Register. */
+#define	DMCISR		0x48100078 /* Dynamic MC Interrupt Status Register. */
+#define	DDR_DLS		0x48100080 /* DDR Delay Line Value Status register for external DDR memory. */
+#define	EMPI		0x48100090 /* EMPI Control Register */
+#define	RCOMP		0x48100100
+#define	PAD_MA		0x48100110
+#define	PAD_MDMSB	0x48100114
+#define	PAD_MDLSB	0x48100118
+#define	PAD_DMEM	0x4810011c
+#define	PAD_SDCLK	0x48100120
+#define	PAD_SDCS	0x48100124
+#define	PAD_SMEM	0x48100128
+#define	PAD_SCLK	0x4810012C
+#define	TAI		0x48100F00 /* TAI Tavor Address Isolation Register */
+
+/* Some frequently used bits */
+#define MDCNFG_DMAP	0x80000000	/* SDRAM 1GB Memory Map Enable */
+#define MDCNFG_DMCEN	0x40000000	/* Enable Dynamic Memory Controller */
+#define MDCNFG_HWFREQ	0x20000000	/* Hardware Frequency Change Calibration */
+#define MDCNFG_DTYPE	0x400		/* SDRAM Type: 1=DDR SDRAM */
+
+#define MDCNFG_DTC_0	0x0		/* Timing Category of SDRAM */
+#define MDCNFG_DTC_1	0x100
+#define MDCNFG_DTC_2	0x200
+#define MDCNFG_DTC_3	0x300
+
+#define MDCNFG_DRAC_12	0x0		/* Number of Row Access Bits */
+#define MDCNFG_DRAC_13	0x20
+#define MDCNFG_DRAC_14	0x40
+
+#define MDCNFG_DCAC_9	0x0		/* Number of Column Acess Bits */
+#define MDCNFG_DCAC_10	0x08
+#define MDCNFG_DCAC_11	0x10
+
+#define MDCNFG_DBW_16	0x4		/* SDRAM Data Bus width 16bit */
+#define MDCNFG_DCSE1	0x2		/* SDRAM CS 1 Enable */
+#define MDCNFG_DCSE0	0x1		/* SDRAM CS 0 Enable */
+
+
+/* Data Flash Controller Registers */
+
+#define NDCR		0x43100000  /* Data Flash Control register */
+#define NDTR0CS0	0x43100004  /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
+/* #define NDTR0CS1	0x43100008  /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
+#define NDTR1CS0	0x4310000C  /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
+/* #define NDTR1CS1	0x43100010  /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
+#define NDSR		0x43100014  /* Data Controller Status Register */
+#define NDPCR		0x43100018  /* Data Controller Page Count Register */
+#define NDBDR0		0x4310001C  /* Data Controller Bad Block Register 0 */
+#define NDBDR1		0x43100020  /* Data Controller Bad Block Register 1 */
+#define NDDB		0x43100040  /* Data Controller Data Buffer */
+#define NDCB0		0x43100048  /* Data Controller Command Buffer0 */
+#define NDCB1		0x4310004C  /* Data Controller Command Buffer1 */
+#define NDCB2		0x43100050  /* Data Controller Command Buffer2 */
+
+#define NDCR_SPARE_EN	(0x1<<31)
+#define NDCR_ECC_EN	(0x1<<30)
+#define NDCR_DMA_EN	(0x1<<29)
+#define NDCR_ND_RUN	(0x1<<28)
+#define NDCR_DWIDTH_C	(0x1<<27)
+#define NDCR_DWIDTH_M	(0x1<<26)
+#define NDCR_PAGE_SZ	(0x3<<24)
+#define NDCR_NCSX	(0x1<<23)
+#define NDCR_ND_STOP	(0x1<<22)
+/* reserved:
+ * #define NDCR_ND_MODE	(0x3<<21)
+ * #define NDCR_NAND_MODE   0x0 */
+#define NDCR_CLR_PG_CNT	(0x1<<20)
+#define NDCR_CLR_ECC	(0x1<<19)
+#define NDCR_RD_ID_CNT	(0x7<<16)
+#define NDCR_RA_START	(0x1<<15)
+#define NDCR_PG_PER_BLK	(0x1<<14)
+#define NDCR_ND_ARB_EN	(0x1<<12)
+#define NDCR_RDYM	(0x1<<11)
+#define NDCR_CS0_PAGEDM	(0x1<<10)
+#define NDCR_CS1_PAGEDM	(0x1<<9)
+#define NDCR_CS0_CMDDM	(0x1<<8)
+#define NDCR_CS1_CMDDM	(0x1<<7)
+#define NDCR_CS0_BBDM	(0x1<<6)
+#define NDCR_CS1_BBDM	(0x1<<5)
+#define NDCR_DBERRM	(0x1<<4)
+#define NDCR_SBERRM	(0x1<<3)
+#define NDCR_WRDREQM	(0x1<<2)
+#define NDCR_RDDREQM	(0x1<<1)
+#define NDCR_WRCMDREQM	(0x1)
+
+#define NDSR_RDY	(0x1<<11)
+#define NDSR_CS0_PAGED	(0x1<<10)
+#define NDSR_CS1_PAGED	(0x1<<9)
+#define NDSR_CS0_CMDD	(0x1<<8)
+#define NDSR_CS1_CMDD	(0x1<<7)
+#define NDSR_CS0_BBD	(0x1<<6)
+#define NDSR_CS1_BBD	(0x1<<5)
+#define NDSR_DBERR	(0x1<<4)
+#define NDSR_SBERR	(0x1<<3)
+#define NDSR_WRDREQ	(0x1<<2)
+#define NDSR_RDDREQ	(0x1<<1)
+#define NDSR_WRCMDREQ	(0x1)
+
+#define NDCB0_AUTO_RS	(0x1<<25)
+#define NDCB0_CSEL	(0x1<<24)
+#define NDCB0_CMD_TYPE	(0x7<<21)
+#define NDCB0_NC	(0x1<<20)
+#define NDCB0_DBC	(0x1<<19)
+#define NDCB0_ADDR_CYC	(0x7<<16)
+#define NDCB0_CMD2	(0xff<<8)
+#define NDCB0_CMD1	(0xff)
+#define MCMEM(s) MCMEM0
+#define MCATT(s) MCATT0
+#define MCIO(s) MCIO0
+#define MECR_CIT	(1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+/* Maximum values for NAND Interface Timing Registers in DFC clock
+ * periods */
+#define DFC_MAX_tCH	7
+#define DFC_MAX_tCS	7
+#define DFC_MAX_tWH	7
+#define DFC_MAX_tWP	7
+#define DFC_MAX_tRH	7
+#define DFC_MAX_tRP	15
+#define DFC_MAX_tR	65535
+#define DFC_MAX_tWHR	15
+#define DFC_MAX_tAR	15
+
+#define DFC_CLOCK	104		/* DFC Clock is 104 MHz */
+#define DFC_CLK_PER_US	DFC_CLOCK/1000	/* clock period in ns */
+
+#else /* CONFIG_CPU_MONAHANS */
+
+/* PXA2xx */
+
+#define MEMC_BASE	0x48000000  /* Base of Memory Controller */
+#define MDCNFG_OFFSET	0x0
+#define MDREFR_OFFSET	0x4
+#define MSC0_OFFSET	0x8
+#define MSC1_OFFSET	0xC
+#define MSC2_OFFSET	0x10
+#define MECR_OFFSET	0x14
+#define SXLCR_OFFSET	0x18
+#define SXCNFG_OFFSET	0x1C
+#define FLYCNFG_OFFSET	0x20
+#define SXMRS_OFFSET	0x24
+#define MCMEM0_OFFSET	0x28
+#define MCMEM1_OFFSET	0x2C
+#define MCATT0_OFFSET	0x30
+#define MCATT1_OFFSET	0x34
+#define MCIO0_OFFSET	0x38
+#define MCIO1_OFFSET	0x3C
+#define MDMRS_OFFSET	0x40
+
+#define MDCNFG		0x48000000  /* SDRAM Configuration Register 0 */
+#define MDCNFG_DE0	0x00000001
+#define MDCNFG_DE1	0x00000002
+#define MDCNFG_DE2	0x00010000
+#define MDCNFG_DE3	0x00020000
+#define MDCNFG_DWID0	0x00000004
+
+#define MDREFR		0x48000004  /* SDRAM Refresh Control Register */
+#define MSC0		0x48000008  /* Static Memory Control Register 0 */
+#define MSC1		0x4800000C  /* Static Memory Control Register 1 */
+#define MSC2		0x48000010  /* Static Memory Control Register 2 */
+#define MECR		0x48000014  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		0x48000018  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		0x4800001C  /* Synchronous Static Memory Control Register */
+#define FLYCNFG		0x48000020
+#define SXMRS		0x48000024  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		0x48000028  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		0x4800002C  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		0x48000030  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		0x48000034  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		0x48000038  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		0x4800003C  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		0x48000040  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	0x48000044  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+#define MDREFR_ALTREFA	(1 << 31)	/* Exiting Alternate Bus Master Mode Refresh Control */
+#define MDREFR_ALTREFB	(1 << 30)	/* Entering Alternate Bus Master Mode Refresh Control */
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+#if defined(CONFIG_CPU_PXA27X)
+
+#define ARB_CNTRL	0x48000048  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK		(1<<29)	   /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
+#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
+#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
+#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
+#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+#endif /* CONFIG_CPU_PXA27X */
+
+/* LCD registers */
+#define LCCR4		0x44000010  /* LCD Controller Control Register 4 */
+#define LCCR5		0x44000014  /* LCD Controller Control Register 5 */
+#define FBR0		0x44000020  /* DMA Channel 0 Frame Branch Register */
+#define FBR1		0x44000024  /* DMA Channel 1 Frame Branch Register */
+#define FBR2		0x44000028  /* DMA Channel 2 Frame Branch Register */
+#define FBR3		0x4400002C  /* DMA Channel 3 Frame Branch Register */
+#define FBR4		0x44000030  /* DMA Channel 4 Frame Branch Register */
+#define FDADR2		0x44000220  /* DMA Channel 2 Frame Descriptor Address Register */
+#define FSADR2		0x44000224  /* DMA Channel 2 Frame Source Address Register */
+#define FIDR2		0x44000228  /* DMA Channel 2 Frame ID Register */
+#define LDCMD2		0x4400022C  /* DMA Channel 2 Command Register */
+#define FDADR3		0x44000230  /* DMA Channel 3 Frame Descriptor Address Register */
+#define FSADR3		0x44000234  /* DMA Channel 3 Frame Source Address Register */
+#define FIDR3		0x44000238  /* DMA Channel 3 Frame ID Register */
+#define LDCMD3		0x4400023C  /* DMA Channel 3 Command Register */
+#define FDADR4		0x44000240  /* DMA Channel 4 Frame Descriptor Address Register */
+#define FSADR4		0x44000244  /* DMA Channel 4 Frame Source Address Register */
+#define FIDR4		0x44000248  /* DMA Channel 4 Frame ID Register */
+#define LDCMD4		0x4400024C  /* DMA Channel 4 Command Register */
+#define FDADR5		0x44000250  /* DMA Channel 5 Frame Descriptor Address Register */
+#define FSADR5		0x44000254  /* DMA Channel 5 Frame Source Address Register */
+#define FIDR5		0x44000258  /* DMA Channel 5 Frame ID Register */
+#define LDCMD5		0x4400025C  /* DMA Channel 5 Command Register */
+
+#define OVL1C1		0x44000050  /* Overlay 1 Control Register 1 */
+#define OVL1C2		0x44000060  /* Overlay 1 Control Register 2 */
+#define OVL2C1		0x44000070  /* Overlay 2 Control Register 1 */
+#define OVL2C2		0x44000080  /* Overlay 2 Control Register 2 */
+#define CCR		0x44000090  /* Cursor Control Register */
+
+#define FBR5		0x44000110  /* DMA Channel 5 Frame Branch Register */
+#define FBR6		0x44000114  /* DMA Channel 6 Frame Branch Register */
+
+#define LCCR0_LDDALT	(1<<26)		/* LDD Alternate mapping bit when base pixel is RGBT16 */
+#define LCCR0_OUC	(1<<25)		/* Overlay Underlay Control Bit */
+
+#define LCCR5_SOFM1	(1<<0)		/* Start Of Frame Mask for Overlay 1 (channel 1) */
+#define LCCR5_SOFM2	(1<<1)		/* Start Of Frame Mask for Overlay 2 (channel 2) */
+#define LCCR5_SOFM3	(1<<2)		/* Start Of Frame Mask for Overlay 2 (channel 3) */
+#define LCCR5_SOFM4	(1<<3)		/* Start Of Frame Mask for Overlay 2 (channel 4) */
+#define LCCR5_SOFM5	(1<<4)		/* Start Of Frame Mask for cursor (channel 5) */
+#define LCCR5_SOFM6	(1<<5)		/* Start Of Frame Mask for command data (channel 6) */
+
+#define LCCR5_EOFM1	(1<<8)		/* End Of Frame Mask for Overlay 1 (channel 1) */
+#define LCCR5_EOFM2	(1<<9)		/* End Of Frame Mask for Overlay 2 (channel 2) */
+#define LCCR5_EOFM3	(1<<10)		/* End Of Frame Mask for Overlay 2 (channel 3) */
+#define LCCR5_EOFM4	(1<<11)		/* End Of Frame Mask for Overlay 2 (channel 4) */
+#define LCCR5_EOFM5	(1<<12)		/* End Of Frame Mask for cursor (channel 5) */
+#define LCCR5_EOFM6	(1<<13)		/* End Of Frame Mask for command data (channel 6) */
+
+#define LCCR5_BSM1	(1<<16)		/* Branch mask for Overlay 1 (channel 1) */
+#define LCCR5_BSM2	(1<<17)		/* Branch mask for Overlay 2 (channel 2) */
+#define LCCR5_BSM3	(1<<18)		/* Branch mask for Overlay 2 (channel 3) */
+#define LCCR5_BSM4	(1<<19)		/* Branch mask for Overlay 2 (channel 4) */
+#define LCCR5_BSM5	(1<<20)		/* Branch mask for cursor (channel 5) */
+#define LCCR5_BSM6	(1<<21)		/* Branch mask for data command	 (channel 6) */
+
+#define LCCR5_IUM1	(1<<24)		/* Input FIFO Underrun Mask for Overlay 1  */
+#define LCCR5_IUM2	(1<<25)		/* Input FIFO Underrun Mask for Overlay 2  */
+#define LCCR5_IUM3	(1<<26)		/* Input FIFO Underrun Mask for Overlay 2  */
+#define LCCR5_IUM4	(1<<27)		/* Input FIFO Underrun Mask for Overlay 2  */
+#define LCCR5_IUM5	(1<<28)		/* Input FIFO Underrun Mask for cursor */
+#define LCCR5_IUM6	(1<<29)		/* Input FIFO Underrun Mask for data command */
+
+#define OVL1C1_O1EN	(1<<31)		/* Enable bit for Overlay 1 */
+#define OVL2C1_O2EN	(1<<31)		/* Enable bit for Overlay 2 */
+#define CCR_CEN		(1<<31)		/* Enable bit for Cursor */
+
+/* Keypad controller */
+
+#define KPC		0x41500000 /* Keypad Interface Control register */
+#define KPDK		0x41500008 /* Keypad Interface Direct Key register */
+#define KPREC		0x41500010 /* Keypad Intefcace Rotary Encoder register */
+#define KPMK		0x41500018 /* Keypad Intefcace Matrix Key register */
+#define KPAS		0x41500020 /* Keypad Interface Automatic Scan register */
+#define KPASMKP0	0x41500028 /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
+#define KPASMKP1	0x41500030 /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
+#define KPASMKP2	0x41500038 /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
+#define KPASMKP3	0x41500040 /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
+#define KPKDI		0x41500048 /* Keypad Interface Key Debounce Interval register */
+
+#define KPC_AS		(0x1 << 30)  /* Automatic Scan bit */
+#define KPC_ASACT	(0x1 << 29)  /* Automatic Scan on Activity */
+#define KPC_MI		(0x1 << 22)  /* Matrix interrupt bit */
+#define KPC_IMKP	(0x1 << 21)  /* Ignore Multiple Key Press */
+#define KPC_MS7		(0x1 << 20)  /* Matrix scan line 7 */
+#define KPC_MS6		(0x1 << 19)  /* Matrix scan line 6 */
+#define KPC_MS5		(0x1 << 18)  /* Matrix scan line 5 */
+#define KPC_MS4		(0x1 << 17)  /* Matrix scan line 4 */
+#define KPC_MS3		(0x1 << 16)  /* Matrix scan line 3 */
+#define KPC_MS2		(0x1 << 15)  /* Matrix scan line 2 */
+#define KPC_MS1		(0x1 << 14)  /* Matrix scan line 1 */
+#define KPC_MS0		(0x1 << 13)  /* Matrix scan line 0 */
+#define KPC_ME		(0x1 << 12)  /* Matrix Keypad Enable */
+#define KPC_MIE		(0x1 << 11)  /* Matrix Interrupt Enable */
+#define KPC_DK_DEB_SEL	(0x1 <<	 9)  /* Direct Key Debounce select */
+#define KPC_DI		(0x1 <<	 5)  /* Direct key interrupt bit */
+#define KPC_DEE0	(0x1 <<	 2)  /* Rotary Encoder 0 Enable */
+#define KPC_DE		(0x1 <<	 1)  /* Direct Keypad Enable */
+#define KPC_DIE		(0x1 <<	 0)  /* Direct Keypad interrupt Enable */
+
+#define KPDK_DKP	(0x1 << 31)
+#define KPDK_DK7	(0x1 <<	 7)
+#define KPDK_DK6	(0x1 <<	 6)
+#define KPDK_DK5	(0x1 <<	 5)
+#define KPDK_DK4	(0x1 <<	 4)
+#define KPDK_DK3	(0x1 <<	 3)
+#define KPDK_DK2	(0x1 <<	 2)
+#define KPDK_DK1	(0x1 <<	 1)
+#define KPDK_DK0	(0x1 <<	 0)
+
+#define KPREC_OF1	(0x1 << 31)
+#define kPREC_UF1	(0x1 << 30)
+#define KPREC_OF0	(0x1 << 15)
+#define KPREC_UF0	(0x1 << 14)
+
+#define KPMK_MKP	(0x1 << 31)
+#define KPAS_SO		(0x1 << 31)
+#define KPASMKPx_SO	(0x1 << 31)
+
+#define GPIO113_BIT	(1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
+#define PSLR		0x40F00034
+#define PSTR		0x40F00038  /* Power Manager Standby Configuration Reg */
+#define PSNR		0x40F0003C  /* Power Manager Sense Configuration Reg */
+#define PVCR		0x40F00040  /* Power Manager Voltage Change Control Reg */
+#define PKWR		0x40F00050  /* Power Manager KB Wake-Up Enable Reg */
+#define PKSR		0x40F00054  /* Power Manager KB Level-Detect Status Reg */
+#define OSMR4		0x40A00080  /* */
+#define OSCR4		0x40A00040  /* OS Timer Counter Register */
+#define OMCR4		0x40A000C0  /* */
+
+#endif	/* CONFIG_CPU_PXA27X */
+
+#endif	/* _PXA_REGS_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-pxa/pxa.h b/roms/u-boot/arch/arm/include/asm/arch-pxa/pxa.h
new file mode 100644
index 000000000..428a848e1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-pxa/pxa.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * PXA common functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#ifndef	__PXA_H__
+#define	__PXA_H__
+
+#define PXA255_A0	0x00000106
+#define PXA250_C0	0x00000105
+#define PXA250_B2	0x00000104
+#define PXA250_B1	0x00000103
+#define PXA250_B0	0x00000102
+#define PXA250_A1	0x00000101
+#define PXA250_A0	0x00000100
+#define PXA210_C0	0x00000125
+#define PXA210_B2	0x00000124
+#define PXA210_B1	0x00000123
+#define PXA210_B0	0x00000122
+
+int cpu_is_pxa25x(void);
+int cpu_is_pxa27x(void);
+uint32_t pxa_get_cpu_revision(void);
+void pxa2xx_dram_init(void);
+
+#endif	/* __PXA_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-mmc.h b/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-mmc.h
new file mode 100644
index 000000000..6d9a736d9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-mmc.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#ifndef __REGS_MMC_H__
+#define __REGS_MMC_H__
+
+#define MMC0_BASE	0x41100000
+#define MMC1_BASE	0x42000000
+
+int pxa_mmc_register(int card_index);
+
+struct pxa_mmc_regs {
+	uint32_t	strpcl;
+	uint32_t	stat;
+	uint32_t	clkrt;
+	uint32_t	spi;
+	uint32_t	cmdat;
+	uint32_t	resto;
+	uint32_t	rdto;
+	uint32_t	blklen;
+	uint32_t	nob;
+	uint32_t	prtbuf;
+	uint32_t	i_mask;
+	uint32_t	i_reg;
+	uint32_t	cmd;
+	uint32_t	argh;
+	uint32_t	argl;
+	uint32_t	res;
+	uint32_t	rxfifo;
+	uint32_t	txfifo;
+};
+
+/* MMC_STRPCL */
+#define MMC_STRPCL_STOP_CLK		(1 << 0)
+#define MMC_STRPCL_START_CLK		(1 << 1)
+
+/* MMC_STAT */
+#define MMC_STAT_END_CMD_RES		(1 << 13)
+#define MMC_STAT_PRG_DONE		(1 << 12)
+#define MMC_STAT_DATA_TRAN_DONE		(1 << 11)
+#define MMC_STAT_CLK_EN			(1 << 8)
+#define MMC_STAT_RECV_FIFO_FULL		(1 << 7)
+#define MMC_STAT_XMIT_FIFO_EMPTY	(1 << 6)
+#define MMC_STAT_RES_CRC_ERROR		(1 << 5)
+#define MMC_STAT_SPI_READ_ERROR_TOKEN	(1 << 4)
+#define MMC_STAT_CRC_READ_ERROR		(1 << 3)
+#define MMC_STAT_CRC_WRITE_ERROR	(1 << 2)
+#define MMC_STAT_TIME_OUT_RESPONSE	(1 << 1)
+#define MMC_STAT_READ_TIME_OUT		(1 << 0)
+
+/* MMC_CLKRT */
+#define MMC_CLKRT_20MHZ			0
+#define MMC_CLKRT_10MHZ			1
+#define MMC_CLKRT_5MHZ			2
+#define MMC_CLKRT_2_5MHZ		3
+#define MMC_CLKRT_1_25MHZ		4
+#define MMC_CLKRT_0_625MHZ		5
+#define MMC_CLKRT_0_3125MHZ		6
+
+/* MMC_SPI */
+#define MMC_SPI_EN			(1 << 0)
+#define MMC_SPI_CS_EN			(1 << 2)
+#define MMC_SPI_CS_ADDRESS		(1 << 3)
+#define MMC_SPI_CRC_ON			(1 << 1)
+
+/* MMC_CMDAT */
+#define MMC_CMDAT_SD_4DAT		(1 << 8)
+#define MMC_CMDAT_MMC_DMA_EN		(1 << 7)
+#define MMC_CMDAT_INIT			(1 << 6)
+#define MMC_CMDAT_BUSY			(1 << 5)
+#define MMC_CMDAT_BCR			(MMC_CMDAT_BUSY | MMC_CMDAT_INIT)
+#define MMC_CMDAT_STREAM		(1 << 4)
+#define MMC_CMDAT_WRITE			(1 << 3)
+#define MMC_CMDAT_DATA_EN		(1 << 2)
+#define MMC_CMDAT_R0			0
+#define MMC_CMDAT_R1			1
+#define MMC_CMDAT_R2			2
+#define MMC_CMDAT_R3			3
+
+/* MMC_RESTO */
+#define MMC_RES_TO_MAX_MASK		0x7f
+
+/* MMC_RDTO */
+#define MMC_READ_TO_MAX_MASK		0xffff
+
+/* MMC_BLKLEN */
+#define MMC_BLK_LEN_MAX_MASK		0x3ff
+
+/* MMC_PRTBUF */
+#define MMC_PRTBUF_BUF_PART_FULL	(1 << 0)
+
+/* MMC_I_MASK */
+#define MMC_I_MASK_TXFIFO_WR_REQ	(1 << 6)
+#define MMC_I_MASK_RXFIFO_RD_REQ	(1 << 5)
+#define MMC_I_MASK_CLK_IS_OFF		(1 << 4)
+#define MMC_I_MASK_STOP_CMD		(1 << 3)
+#define MMC_I_MASK_END_CMD_RES		(1 << 2)
+#define MMC_I_MASK_PRG_DONE		(1 << 1)
+#define MMC_I_MASK_DATA_TRAN_DONE	(1 << 0)
+#define MMC_I_MASK_ALL			0x7f
+
+
+/* MMC_I_REG */
+#define MMC_I_REG_TXFIFO_WR_REQ		(1 << 6)
+#define MMC_I_REG_RXFIFO_RD_REQ		(1 << 5)
+#define MMC_I_REG_CLK_IS_OFF		(1 << 4)
+#define MMC_I_REG_STOP_CMD		(1 << 3)
+#define MMC_I_REG_END_CMD_RES		(1 << 2)
+#define MMC_I_REG_PRG_DONE		(1 << 1)
+#define MMC_I_REG_DATA_TRAN_DONE	(1 << 0)
+
+/* MMC_CMD */
+#define MMC_CMD_INDEX_MAX		0x6f
+
+#define MMC_R1_IDLE_STATE		0x01
+#define MMC_R1_ERASE_STATE		0x02
+#define MMC_R1_ILLEGAL_CMD		0x04
+#define MMC_R1_COM_CRC_ERR		0x08
+#define MMC_R1_ERASE_SEQ_ERR		0x01
+#define MMC_R1_ADDR_ERR			0x02
+#define MMC_R1_PARAM_ERR		0x04
+
+#define MMC_R1B_WP_ERASE_SKIP		0x0002
+#define MMC_R1B_ERR			0x0004
+#define MMC_R1B_CC_ERR			0x0008
+#define MMC_R1B_CARD_ECC_ERR		0x0010
+#define MMC_R1B_WP_VIOLATION		0x0020
+#define MMC_R1B_ERASE_PARAM		0x0040
+#define MMC_R1B_OOR			0x0080
+#define MMC_R1B_IDLE_STATE		0x0100
+#define MMC_R1B_ERASE_RESET		0x0200
+#define MMC_R1B_ILLEGAL_CMD		0x0400
+#define MMC_R1B_COM_CRC_ERR		0x0800
+#define MMC_R1B_ERASE_SEQ_ERR		0x1000
+#define MMC_R1B_ADDR_ERR		0x2000
+#define MMC_R1B_PARAM_ERR		0x4000
+
+#endif	/* __REGS_MMC_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-uart.h b/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-uart.h
new file mode 100644
index 000000000..bdd0a4757
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-uart.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#ifndef	__REGS_UART_H__
+#define	__REGS_UART_H__
+
+#define	FFUART_BASE		0x40100000
+#define	BTUART_BASE		0x40200000
+#define	STUART_BASE		0x40700000
+#define	HWUART_BASE		0x41600000
+
+struct pxa_uart_regs {
+	union {
+		uint32_t	thr;
+		uint32_t	rbr;
+		uint32_t	dll;
+	};
+	union {
+		uint32_t	ier;
+		uint32_t	dlh;
+	};
+	union {
+		uint32_t	fcr;
+		uint32_t	iir;
+	};
+	uint32_t	lcr;
+	uint32_t	mcr;
+	uint32_t	lsr;
+	uint32_t	msr;
+	uint32_t	spr;
+	uint32_t	isr;
+};
+
+#define	IER_DMAE	(1 << 7)
+#define	IER_UUE		(1 << 6)
+#define	IER_NRZE	(1 << 5)
+#define	IER_RTIOE	(1 << 4)
+#define	IER_MIE		(1 << 3)
+#define	IER_RLSE	(1 << 2)
+#define	IER_TIE		(1 << 1)
+#define	IER_RAVIE	(1 << 0)
+
+#define	IIR_FIFOES1	(1 << 7)
+#define	IIR_FIFOES0	(1 << 6)
+#define	IIR_TOD		(1 << 3)
+#define	IIR_IID2	(1 << 2)
+#define	IIR_IID1	(1 << 1)
+#define	IIR_IP		(1 << 0)
+
+#define	FCR_ITL2	(1 << 7)
+#define	FCR_ITL1	(1 << 6)
+#define	FCR_RESETTF	(1 << 2)
+#define	FCR_RESETRF	(1 << 1)
+#define	FCR_TRFIFOE	(1 << 0)
+#define	FCR_ITL_1	0
+#define	FCR_ITL_8	(FCR_ITL1)
+#define	FCR_ITL_16	(FCR_ITL2)
+#define	FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define	LCR_DLAB	(1 << 7)
+#define	LCR_SB		(1 << 6)
+#define	LCR_STKYP	(1 << 5)
+#define	LCR_EPS		(1 << 4)
+#define	LCR_PEN		(1 << 3)
+#define	LCR_STB		(1 << 2)
+#define	LCR_WLS1	(1 << 1)
+#define	LCR_WLS0	(1 << 0)
+
+#define	LSR_FIFOE	(1 << 7)
+#define	LSR_TEMT	(1 << 6)
+#define	LSR_TDRQ	(1 << 5)
+#define	LSR_BI		(1 << 4)
+#define	LSR_FE		(1 << 3)
+#define	LSR_PE		(1 << 2)
+#define	LSR_OE		(1 << 1)
+#define	LSR_DR		(1 << 0)
+
+#define	MCR_LOOP	(1 << 4)
+#define	MCR_OUT2	(1 << 3)
+#define	MCR_OUT1	(1 << 2)
+#define	MCR_RTS		(1 << 1)
+#define	MCR_DTR		(1 << 0)
+
+#define	MSR_DCD		(1 << 7)
+#define	MSR_RI		(1 << 6)
+#define	MSR_DSR		(1 << 5)
+#define	MSR_CTS		(1 << 4)
+#define	MSR_DDCD	(1 << 3)
+#define	MSR_TERI	(1 << 2)
+#define	MSR_DDSR	(1 << 1)
+#define	MSR_DCTS	(1 << 0)
+
+#endif	/* __REGS_UART_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-usb.h b/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-usb.h
new file mode 100644
index 000000000..e46887c9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-pxa/regs-usb.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * PXA25x UDC definitions
+ *
+ * Copyright (C) 2012 �ukasz Dałek <luk0104@gmail.com>
+ */
+
+#ifndef __REGS_USB_H__
+#define __REGS_USB_H__
+
+struct pxa25x_udc_regs {
+	/* UDC Control Register */
+	uint32_t	udccr; /* 0x000 */
+	uint32_t	reserved1;
+
+	/* UDC Control Function Register */
+	uint32_t	udccfr; /* 0x008 */
+	uint32_t	reserved2;
+
+	/* UDC Endpoint Control/Status Registers */
+	uint32_t	udccs[16]; /* 0x010 - 0x04c */
+
+	/* UDC Interrupt Control/Status Registers */
+	uint32_t	uicr0; /* 0x050 */
+	uint32_t	uicr1; /* 0x054 */
+	uint32_t	usir0; /* 0x058 */
+	uint32_t	usir1; /* 0x05c */
+
+	/* UDC Frame Number/Byte Count Registers */
+	uint32_t	ufnrh;  /* 0x060 */
+	uint32_t	ufnrl;  /* 0x064 */
+	uint32_t	ubcr2;  /* 0x068 */
+	uint32_t	ubcr4;  /* 0x06c */
+	uint32_t	ubcr7;  /* 0x070 */
+	uint32_t	ubcr9;  /* 0x074 */
+	uint32_t	ubcr12; /* 0x078 */
+	uint32_t	ubcr14; /* 0x07c */
+
+	/* UDC Endpoint Data Registers */
+	uint32_t	uddr0;  /* 0x080 */
+	uint32_t	reserved3[7];
+	uint32_t	uddr5;  /* 0x0a0 */
+	uint32_t	reserved4[7];
+	uint32_t	uddr10; /* 0x0c0 */
+	uint32_t	reserved5[7];
+	uint32_t	uddr15; /* 0x0e0 */
+	uint32_t	reserved6[7];
+	uint32_t	uddr1;  /* 0x100 */
+	uint32_t	reserved7[31];
+	uint32_t	uddr2;  /* 0x180 */
+	uint32_t	reserved8[31];
+	uint32_t	uddr3;  /* 0x200 */
+	uint32_t	reserved9[127];
+	uint32_t	uddr4;  /* 0x400 */
+	uint32_t	reserved10[127];
+	uint32_t	uddr6;  /* 0x600 */
+	uint32_t	reserved11[31];
+	uint32_t	uddr7;  /* 0x680 */
+	uint32_t	reserved12[31];
+	uint32_t	uddr8;  /* 0x700 */
+	uint32_t	reserved13[127];
+	uint32_t	uddr9;  /* 0x900 */
+	uint32_t	reserved14[127];
+	uint32_t	uddr11; /* 0xb00 */
+	uint32_t	reserved15[31];
+	uint32_t	uddr12; /* 0xb80 */
+	uint32_t	reserved16[31];
+	uint32_t	uddr13; /* 0xc00 */
+	uint32_t	reserved17[127];
+	uint32_t	uddr14; /* 0xe00 */
+
+};
+
+#define PXA25X_UDC_BASE		0x40600000
+
+#define UDCCR_UDE		(1 << 0)
+#define UDCCR_UDA		(1 << 1)
+#define UDCCR_RSM		(1 << 2)
+#define UDCCR_RESIR		(1 << 3)
+#define UDCCR_SUSIR		(1 << 4)
+#define UDCCR_SRM		(1 << 5)
+#define UDCCR_RSTIR		(1 << 6)
+#define UDCCR_REM		(1 << 7)
+
+/* Bulk IN endpoint 1/6/11 */
+#define UDCCS_BI_TSP		(1 << 7)
+#define UDCCS_BI_FST		(1 << 5)
+#define UDCCS_BI_SST		(1 << 4)
+#define UDCCS_BI_TUR		(1 << 3)
+#define UDCCS_BI_FTF		(1 << 2)
+#define UDCCS_BI_TPC		(1 << 1)
+#define UDCCS_BI_TFS		(1 << 0)
+
+/* Bulk OUT endpoint 2/7/12 */
+#define UDCCS_BO_RSP		(1 << 7)
+#define UDCCS_BO_RNE		(1 << 6)
+#define UDCCS_BO_FST		(1 << 5)
+#define UDCCS_BO_SST		(1 << 4)
+#define UDCCS_BO_DME		(1 << 3)
+#define UDCCS_BO_RPC		(1 << 1)
+#define UDCCS_BO_RFS		(1 << 0)
+
+/* Isochronous OUT endpoint 4/9/14 */
+#define UDCCS_IO_RSP		(1 << 7)
+#define UDCCS_IO_RNE		(1 << 6)
+#define UDCCS_IO_DME		(1 << 3)
+#define UDCCS_IO_ROF		(1 << 2)
+#define UDCCS_IO_RPC		(1 << 1)
+#define UDCCS_IO_RFS		(1 << 0)
+
+/* Control endpoint 0 */
+#define UDCCS0_OPR		(1 << 0)
+#define UDCCS0_IPR		(1 << 1)
+#define UDCCS0_FTF		(1 << 2)
+#define UDCCS0_DRWF		(1 << 3)
+#define UDCCS0_SST		(1 << 4)
+#define UDCCS0_FST		(1 << 5)
+#define UDCCS0_RNE		(1 << 6)
+#define UDCCS0_SA		(1 << 7)
+
+#define UICR0_IM0		(1 << 0)
+
+#define USIR0_IR0		(1 << 0)
+#define USIR0_IR1		(1 << 1)
+#define USIR0_IR2		(1 << 2)
+#define USIR0_IR3		(1 << 3)
+#define USIR0_IR4		(1 << 4)
+#define USIR0_IR5		(1 << 5)
+#define USIR0_IR6		(1 << 6)
+#define USIR0_IR7		(1 << 7)
+
+#define UDCCFR_AREN		(1 << 7) /* ACK response enable (now) */
+#define UDCCFR_ACM		(1 << 2) /* ACK control mode (wait for AREN) */
+/*
+ * Intel(R) PXA255 Processor Specification, September 2003 (page 31)
+ * define new "must be one" bits in UDCCFR (see Table 12-13.)
+ */
+#define UDCCFR_MB1		(0xff & ~(UDCCFR_AREN | UDCCFR_ACM))
+
+#define UFNRH_SIR		(1 << 7)	/* SOF interrupt request */
+#define UFNRH_SIM		(1 << 6)	/* SOF interrupt mask */
+#define UFNRH_IPE14		(1 << 5)	/* ISO packet error, ep14 */
+#define UFNRH_IPE9		(1 << 4)	/* ISO packet error, ep9 */
+#define UFNRH_IPE4		(1 << 3)	/* ISO packet error, ep4 */
+
+#endif /* __REGS_USB_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3036/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk3036/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3036/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3036/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk3036/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3036/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3128/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk3128/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3128/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3128/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk3128/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3128/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3188/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk3188/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3188/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3188/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk3188/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3188/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk322x/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk322x/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk322x/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk322x/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk322x/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk322x/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3288/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk3288/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3288/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3288/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk3288/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3288/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3308/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk3308/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3308/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3308/cru_rk3308.h b/roms/u-boot/arch/arm/include/asm/arch-rk3308/cru_rk3308.h
new file mode 100644
index 000000000..86c906bb0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3308/cru_rk3308.h
@@ -0,0 +1,288 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018 Rockchip Electronics Co., Ltd.
+ */
+#ifndef _ASM_ARCH_CRU_RK3308_H
+#define _ASM_ARCH_CRU_RK3308_H
+
+#define MHz		1000000
+#define OSC_HZ		(24 * MHz)
+
+#define APLL_HZ		(816 * MHz)
+
+#define CORE_ACLK_HZ	408000000
+#define CORE_DBG_HZ	204000000
+
+#define BUS_ACLK_HZ	200000000
+#define BUS_HCLK_HZ	100000000
+#define BUS_PCLK_HZ	100000000
+
+#define PERI_ACLK_HZ	200000000
+#define PERI_HCLK_HZ	100000000
+#define PERI_PCLK_HZ	100000000
+
+#define AUDIO_HCLK_HZ	100000000
+#define AUDIO_PCLK_HZ	100000000
+
+#define RK3308_PLL_CON(x)	((x) * 0x4)
+#define RK3308_MODE_CON		0xa0
+
+/* RK3308 pll id */
+enum rk3308_pll_id {
+	APLL,
+	DPLL,
+	VPLL0,
+	VPLL1,
+	PLL_COUNT,
+};
+
+struct rk3308_clk_info {
+	unsigned long id;
+	char *name;
+};
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk3308_clk_priv {
+	struct rk3308_cru *cru;
+	ulong armclk_hz;
+	ulong dpll_hz;
+	ulong vpll0_hz;
+	ulong vpll1_hz;
+};
+
+struct rk3308_cru {
+	struct rk3308_pll {
+		unsigned int con0;
+		unsigned int con1;
+		unsigned int con2;
+		unsigned int con3;
+		unsigned int con4;
+		unsigned int reserved0[3];
+	} pll[4];
+	unsigned int reserved1[8];
+	unsigned int mode;
+	unsigned int misc;
+	unsigned int reserved2[2];
+	unsigned int glb_cnt_th;
+	unsigned int glb_rst_st;
+	unsigned int glb_srst_fst;
+	unsigned int glb_srst_snd;
+	unsigned int glb_rst_con;
+	unsigned int pll_lock;
+	unsigned int reserved3[6];
+	unsigned int hwffc_con0;
+	unsigned int reserved4;
+	unsigned int hwffc_th;
+	unsigned int hwffc_intst;
+	unsigned int apll_con0_s;
+	unsigned int apll_con1_s;
+	unsigned int clksel_con0_s;
+	unsigned int reserved5;
+	unsigned int clksel_con[74];
+	unsigned int reserved6[54];
+	unsigned int clkgate_con[15];
+	unsigned int reserved7[(0x380 - 0x338) / 4 - 1];
+	unsigned int ssgtbl[32];
+	unsigned int softrst_con[10];
+	unsigned int reserved8[(0x480 - 0x424) / 4 - 1];
+	unsigned int sdmmc_con[2];
+	unsigned int sdio_con[2];
+	unsigned int emmc_con[2];
+};
+
+enum {
+	/* PLLCON0*/
+	PLL_BP_SHIFT		= 15,
+	PLL_POSTDIV1_SHIFT	= 12,
+	PLL_POSTDIV1_MASK	= 7 << PLL_POSTDIV1_SHIFT,
+	PLL_FBDIV_SHIFT		= 0,
+	PLL_FBDIV_MASK		= 0xfff,
+
+	/* PLLCON1 */
+	PLL_PDSEL_SHIFT		= 15,
+	PLL_PD1_SHIFT		= 14,
+	PLL_PD_SHIFT		= 13,
+	PLL_PD_MASK		= 1 << PLL_PD_SHIFT,
+	PLL_DSMPD_SHIFT		= 12,
+	PLL_DSMPD_MASK		= 1 << PLL_DSMPD_SHIFT,
+	PLL_LOCK_STATUS_SHIFT	= 10,
+	PLL_LOCK_STATUS_MASK	= 1 << PLL_LOCK_STATUS_SHIFT,
+	PLL_POSTDIV2_SHIFT	= 6,
+	PLL_POSTDIV2_MASK	= 7 << PLL_POSTDIV2_SHIFT,
+	PLL_REFDIV_SHIFT	= 0,
+	PLL_REFDIV_MASK		= 0x3f,
+
+	/* PLLCON2 */
+	PLL_FOUT4PHASEPD_SHIFT	= 27,
+	PLL_FOUTVCOPD_SHIFT	= 26,
+	PLL_FOUTPOSTDIVPD_SHIFT	= 25,
+	PLL_DACPD_SHIFT		= 24,
+	PLL_FRAC_DIV	= 0xffffff,
+
+	/* CRU_MODE */
+	PLLMUX_FROM_XIN24M	= 0,
+	PLLMUX_FROM_PLL,
+	PLLMUX_FROM_RTC32K,
+	USBPHY480M_MODE_SHIFT	= 8,
+	USBPHY480M_MODE_MASK	= 3 << USBPHY480M_MODE_SHIFT,
+	VPLL1_MODE_SHIFT		= 6,
+	VPLL1_MODE_MASK		= 3 << VPLL1_MODE_SHIFT,
+	VPLL0_MODE_SHIFT		= 4,
+	VPLL0_MODE_MASK		= 3 << VPLL0_MODE_SHIFT,
+	DPLL_MODE_SHIFT		= 2,
+	DPLL_MODE_MASK		= 3 << DPLL_MODE_SHIFT,
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_MASK		= 3 << APLL_MODE_SHIFT,
+
+	/* CRU_CLK_SEL0_CON */
+	CORE_ACLK_DIV_SHIFT	= 12,
+	CORE_ACLK_DIV_MASK	= 0x7 << CORE_ACLK_DIV_SHIFT,
+	CORE_DBG_DIV_SHIFT	= 8,
+	CORE_DBG_DIV_MASK	= 0xf << CORE_DBG_DIV_SHIFT,
+	CORE_CLK_PLL_SEL_SHIFT	= 6,
+	CORE_CLK_PLL_SEL_MASK	= 0x3 << CORE_CLK_PLL_SEL_SHIFT,
+	CORE_CLK_PLL_SEL_APLL	= 0,
+	CORE_CLK_PLL_SEL_VPLL0,
+	CORE_CLK_PLL_SEL_VPLL1,
+	CORE_DIV_CON_SHIFT	= 0,
+	CORE_DIV_CON_MASK	= 0x0f << CORE_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL5_CON */
+	BUS_PLL_SEL_SHIFT	= 6,
+	BUS_PLL_SEL_MASK	= 0x3 << BUS_PLL_SEL_SHIFT,
+	BUS_PLL_SEL_DPLL	= 0,
+	BUS_PLL_SEL_VPLL0,
+	BUS_PLL_SEL_VPLL1,
+	BUS_ACLK_DIV_SHIFT	= 0,
+	BUS_ACLK_DIV_MASK	= 0x1f << BUS_ACLK_DIV_SHIFT,
+
+	/* CRU_CLK_SEL6_CON */
+	BUS_PCLK_DIV_SHIFT	= 8,
+	BUS_PCLK_DIV_MASK	= 0x1f << BUS_PCLK_DIV_SHIFT,
+	BUS_HCLK_DIV_SHIFT	= 0,
+	BUS_HCLK_DIV_MASK	= 0x1f << BUS_HCLK_DIV_SHIFT,
+
+	/* CRU_CLK_SEL7_CON */
+	CRYPTO_APK_SEL_SHIFT	= 14,
+	CRYPTO_APK_PLL_SEL_MASK	= 3 << CRYPTO_APK_SEL_SHIFT,
+	CRYPTO_PLL_SEL_DPLL	= 0,
+	CRYPTO_PLL_SEL_VPLL0,
+	CRYPTO_PLL_SEL_VPLL1	= 0,
+	CRYPTO_APK_DIV_SHIFT	= 8,
+	CRYPTO_APK_DIV_MASK	= 0x1f << CRYPTO_APK_DIV_SHIFT,
+	CRYPTO_PLL_SEL_SHIFT	= 6,
+	CRYPTO_PLL_SEL_MASK	= 3 << CRYPTO_PLL_SEL_SHIFT,
+	CRYPTO_DIV_SHIFT	= 0,
+	CRYPTO_DIV_MASK		= 0x1f << CRYPTO_DIV_SHIFT,
+
+	/* CRU_CLK_SEL8_CON */
+	DCLK_VOP_SEL_SHIFT	= 14,
+	DCLK_VOP_SEL_MASK	= 0x3 << DCLK_VOP_SEL_SHIFT,
+	DCLK_VOP_SEL_DIVOUT	= 0,
+	DCLK_VOP_SEL_FRACOUT,
+	DCLK_VOP_SEL_24M,
+	DCLK_VOP_PLL_SEL_SHIFT	= 10,
+	DCLK_VOP_PLL_SEL_MASK	= 0x3 << DCLK_VOP_PLL_SEL_SHIFT,
+	DCLK_VOP_PLL_SEL_DPLL	= 0,
+	DCLK_VOP_PLL_SEL_VPLL0,
+	DCLK_VOP_PLL_SEL_VPLL1,
+	DCLK_VOP_DIV_SHIFT	= 0,
+	DCLK_VOP_DIV_MASK	= 0xff,
+
+	/* CRU_CLK_SEL25_CON */
+	/* CRU_CLK_SEL26_CON */
+	/* CRU_CLK_SEL27_CON */
+	/* CRU_CLK_SEL28_CON */
+	CLK_I2C_PLL_SEL_SHIFT		= 14,
+	CLK_I2C_PLL_SEL_MASK		= 0x3 << CLK_I2C_PLL_SEL_SHIFT,
+	CLK_I2C_PLL_SEL_DPLL		= 0,
+	CLK_I2C_PLL_SEL_VPLL0,
+	CLK_I2C_PLL_SEL_24M,
+	CLK_I2C_DIV_CON_SHIFT		= 0,
+	CLK_I2C_DIV_CON_MASK		= 0x7f << CLK_I2C_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL29_CON */
+	CLK_PWM_PLL_SEL_SHIFT		= 14,
+	CLK_PWM_PLL_SEL_MASK		= 0x3 << CLK_PWM_PLL_SEL_SHIFT,
+	CLK_PWM_PLL_SEL_DPLL		= 0,
+	CLK_PWM_PLL_SEL_VPLL0,
+	CLK_PWM_PLL_SEL_24M,
+	CLK_PWM_DIV_CON_SHIFT		= 0,
+	CLK_PWM_DIV_CON_MASK		= 0x7f << CLK_PWM_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL30_CON */
+	/* CRU_CLK_SEL31_CON */
+	/* CRU_CLK_SEL32_CON */
+	CLK_SPI_PLL_SEL_SHIFT		= 14,
+	CLK_SPI_PLL_SEL_MASK		= 0x3 << CLK_SPI_PLL_SEL_SHIFT,
+	CLK_SPI_PLL_SEL_DPLL		= 0,
+	CLK_SPI_PLL_SEL_VPLL0,
+	CLK_SPI_PLL_SEL_24M,
+	CLK_SPI_DIV_CON_SHIFT		= 0,
+	CLK_SPI_DIV_CON_MASK		= 0x7f << CLK_SPI_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL34_CON */
+	CLK_SARADC_DIV_CON_SHIFT	= 0,
+	CLK_SARADC_DIV_CON_MASK		= 0x7ff << CLK_SARADC_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL36_CON */
+	PERI_PLL_SEL_SHIFT	= 6,
+	PERI_PLL_SEL_MASK	= 0x3 << PERI_PLL_SEL_SHIFT,
+	PERI_PLL_DPLL		= 0,
+	PERI_PLL_VPLL0,
+	PERI_PLL_VPLL1,
+	PERI_ACLK_DIV_SHIFT	= 0,
+	PERI_ACLK_DIV_MASK	= 0x1f << PERI_ACLK_DIV_SHIFT,
+
+	/* CRU_CLK_SEL37_CON */
+	PERI_PCLK_DIV_SHIFT	= 8,
+	PERI_PCLK_DIV_MASK	= 0x1f << PERI_PCLK_DIV_SHIFT,
+	PERI_HCLK_DIV_SHIFT	= 0,
+	PERI_HCLK_DIV_MASK	= 0x1f << PERI_HCLK_DIV_SHIFT,
+
+	/* CRU_CLKSEL41_CON */
+	EMMC_CLK_SEL_SHIFT	= 15,
+	EMMC_CLK_SEL_MASK	= 1 << EMMC_CLK_SEL_SHIFT,
+	EMMC_CLK_SEL_EMMC	= 0,
+	EMMC_CLK_SEL_EMMC_DIV50,
+	EMMC_PLL_SHIFT		= 8,
+	EMMC_PLL_MASK		= 0x3 << EMMC_PLL_SHIFT,
+	EMMC_SEL_DPLL		= 0,
+	EMMC_SEL_VPLL0,
+	EMMC_SEL_VPLL1,
+	EMMC_SEL_24M,
+	EMMC_DIV_SHIFT		= 0,
+	EMMC_DIV_MASK		= 0xff << EMMC_DIV_SHIFT,
+
+	/* CRU_CLKSEL43_CON */
+	MAC_CLK_SPEED_SEL_SHIFT = 15,
+	MAC_CLK_SPEED_SEL_MASK = 1 << MAC_CLK_SPEED_SEL_SHIFT,
+	MAC_CLK_SPEED_SEL_10M = 0,
+	MAC_CLK_SPEED_SEL_100M,
+	MAC_CLK_SOURCE_SEL_SHIFT = 14,
+	MAC_CLK_SOURCE_SEL_MASK = 1 << MAC_CLK_SOURCE_SEL_SHIFT,
+	MAC_CLK_SOURCE_SEL_INTERNAL	= 0,
+	MAC_CLK_SOURCE_SEL_EXTERNAL,
+	MAC_PLL_SHIFT		= 6,
+	MAC_PLL_MASK		= 0x3 << MAC_PLL_SHIFT,
+	MAC_SEL_DPLL		= 0,
+	MAC_SEL_VPLL0,
+	MAC_SEL_VPLL1,
+	MAC_DIV_SHIFT		= 0,
+	MAC_DIV_MASK		= 0x1f << MAC_DIV_SHIFT,
+
+	/* CRU_CLK_SEL45_CON */
+	AUDIO_PCLK_DIV_SHIFT	= 8,
+	AUDIO_PCLK_DIV_MASK	= 0x1f << AUDIO_PCLK_DIV_SHIFT,
+	AUDIO_PLL_SEL_SHIFT	= 6,
+	AUDIO_PLL_SEL_MASK	= 0x3 << AUDIO_PLL_SEL_SHIFT,
+	AUDIO_PLL_VPLL0		= 0,
+	AUDIO_PLL_VPLL1,
+	AUDIO_PLL_24M,
+	AUDIO_HCLK_DIV_SHIFT	= 0,
+	AUDIO_HCLK_DIV_MASK	= 0x1f << AUDIO_HCLK_DIV_SHIFT,
+};
+
+check_member(rk3308_cru, emmc_con[1], 0x494);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3308/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk3308/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3308/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3308/grf_rk3308.h b/roms/u-boot/arch/arm/include/asm/arch-rk3308/grf_rk3308.h
new file mode 100644
index 000000000..a995bb950
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3308/grf_rk3308.h
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *Copyright 2019 Rockchip Electronics Co., Ltd.
+ */
+#ifndef _ASM_ARCH_GRF_rk3308_H
+#define _ASM_ARCH_GRF_rk3308_H
+
+struct rk3308_grf {
+	unsigned int gpio0a_iomux;
+	unsigned int reserved0;
+	unsigned int gpio0b_iomux;
+	unsigned int reserved1;
+	unsigned int gpio0c_iomux;
+	unsigned int reserved2[3];
+	unsigned int gpio1a_iomux;
+	unsigned int reserved3;
+	unsigned int gpio1bl_iomux;
+	unsigned int gpio1bh_iomux;
+	unsigned int gpio1cl_iomux;
+	unsigned int gpio1ch_iomux;
+	unsigned int gpio1d_iomux;
+	unsigned int reserved4;
+	unsigned int gpio2a_iomux;
+	unsigned int reserved5;
+	unsigned int gpio2b_iomux;
+	unsigned int reserved6;
+	unsigned int gpio2c_iomux;
+	unsigned int reserved7[3];
+	unsigned int gpio3a_iomux;
+	unsigned int reserved8;
+	unsigned int gpio3b_iomux;
+	unsigned int reserved9[5];
+	unsigned int gpio4a_iomux;
+	unsigned int reserved33;
+	unsigned int gpio4b_iomux;
+	unsigned int reserved10;
+	unsigned int gpio4c_iomux;
+	unsigned int reserved11;
+	unsigned int gpio4d_iomux;
+	unsigned int reserved34;
+	unsigned int gpio0a_p;
+	unsigned int gpio0b_p;
+	unsigned int gpio0c_p;
+	unsigned int reserved12;
+	unsigned int gpio1a_p;
+	unsigned int gpio1b_p;
+	unsigned int gpio1c_p;
+	unsigned int gpio1d_p;
+	unsigned int gpio2a_p;
+	unsigned int gpio2b_p;
+	unsigned int gpio2c_p;
+	unsigned int reserved13;
+	unsigned int gpio3a_p;
+	unsigned int gpio3b_p;
+	unsigned int reserved14[2];
+	unsigned int gpio4a_p;
+	unsigned int gpio4b_p;
+	unsigned int gpio4c_p;
+	unsigned int gpio4d_p;
+	unsigned int reserved15[(0x100 - 0xec) / 4 - 1];
+	unsigned int gpio0a_e;
+	unsigned int gpio0b_e;
+	unsigned int gpio0c_e;
+	unsigned int reserved16;
+	unsigned int gpio1a_e;
+	unsigned int gpio1b_e;
+	unsigned int gpio1c_e;
+	unsigned int gpio1d_e;
+	unsigned int gpio2a_e;
+	unsigned int gpio2b_e;
+	unsigned int gpio2c_e;
+	unsigned int reserved17;
+	unsigned int gpio3a_e;
+	unsigned int gpio3b_e;
+	unsigned int reserved18[2];
+	unsigned int gpio4a_e;
+	unsigned int gpio4b_e;
+	unsigned int gpio4c_e;
+	unsigned int gpio4d_e;
+	unsigned int gpio0a_sr;
+	unsigned int gpio0b_sr;
+	unsigned int gpio0c_sr;
+	unsigned int reserved19;
+	unsigned int gpio1a_sr;
+	unsigned int gpio1b_sr;
+	unsigned int gpio1c_sr;
+	unsigned int gpio1d_sr;
+	unsigned int gpio2a_sr;
+	unsigned int gpio2b_sr;
+	unsigned int gpio2c_sr;
+	unsigned int reserved20;
+	unsigned int gpio3a_sr;
+	unsigned int gpio3b_sr;
+	unsigned int reserved21[2];
+	unsigned int gpio4a_sr;
+	unsigned int gpio4b_sr;
+	unsigned int gpio4c_sr;
+	unsigned int gpio4d_sr;
+	unsigned int gpio0a_smt;
+	unsigned int gpio0b_smt;
+	unsigned int gpio0c_smt;
+	unsigned int reserved22;
+	unsigned int gpio1a_smt;
+	unsigned int gpio1b_smt;
+	unsigned int gpio1c_smt;
+	unsigned int gpio1d_smt;
+	unsigned int gpio2a_smt;
+	unsigned int gpio2b_smt;
+	unsigned int gpio2c_smt;
+	unsigned int reserved23;
+	unsigned int gpio3a_smt;
+	unsigned int gpio3b_smt;
+	unsigned int reserved35[2];
+	unsigned int gpio4a_smt;
+	unsigned int gpio4b_smt;
+	unsigned int gpio4c_smt;
+	unsigned int gpio4d_smt;
+	unsigned int reserved24[(0x300 - 0x1EC) / 4 - 1];
+	unsigned int soc_con0;
+	unsigned int soc_con1;
+	unsigned int soc_con2;
+	unsigned int soc_con3;
+	unsigned int soc_con4;
+	unsigned int soc_con5;
+	unsigned int soc_con6;
+	unsigned int soc_con7;
+	unsigned int soc_con8;
+	unsigned int soc_con9;
+	unsigned int soc_con10;
+	unsigned int reserved25[(0x380 - 0x328) / 4 - 1];
+	unsigned int soc_status0;
+	unsigned int reserved26[(0x400 - 0x380) / 4 - 1];
+	unsigned int cpu_con0;
+	unsigned int cpu_con1;
+	unsigned int cpu_con2;
+	unsigned int reserved27[(0x420 - 0x408) / 4 - 1];
+	unsigned int cpu_status0;
+	unsigned int cpu_status1;
+	unsigned int reserved28[(0x440 - 0x424) / 4 - 1];
+	unsigned int pvtm_con0;
+	unsigned int pvtm_con1;
+	unsigned int pvtm_status0;
+	unsigned int pvtm_status1;
+	unsigned int reserved29[(0x460 - 0x44C) / 4 - 1];
+	unsigned int tsadc_tbl;
+	unsigned int tsadc_tbh;
+	unsigned int reserved30[(0x480 - 0x464) / 4 - 1];
+	unsigned int host0_con0;
+	unsigned int host0_con1;
+	unsigned int otg_con0;
+	unsigned int host0_status0;
+	unsigned int reserved31[(0x4a0 - 0x48C) / 4 - 1];
+	unsigned int mac_con0;
+	unsigned int upctrl_con0;
+	unsigned int upctrl_status0;
+	unsigned int reserved32[(0x500 - 0x4A8) / 4 - 1];
+	unsigned int os_reg0;
+	unsigned int os_reg1;
+	unsigned int os_reg2;
+	unsigned int os_reg3;
+	unsigned int os_reg4;
+	unsigned int os_reg5;
+	unsigned int os_reg6;
+	unsigned int os_reg7;
+	unsigned int os_reg8;
+	unsigned int os_reg9;
+	unsigned int os_reg10;
+	unsigned int os_reg11;
+	unsigned int reserved38[(0x600 - 0x52c) / 4 - 1];
+	unsigned int soc_con12;
+	unsigned int reserved39;
+	unsigned int soc_con13;
+	unsigned int soc_con14;
+	unsigned int soc_con15;
+	unsigned int reserved40[(0x800 - 0x610) / 4 - 1];
+	unsigned int chip_id;
+};
+check_member(rk3308_grf, gpio0a_p, 0xa0);
+
+struct rk3308_sgrf {
+	unsigned int soc_con0;
+	unsigned int soc_con1;
+	unsigned int con_tzma_r0size;
+	unsigned int con_secure0;
+	unsigned int reserved0;
+	unsigned int clk_timer_en;
+	unsigned int clkgat_con;
+	unsigned int fastboot_addr;
+	unsigned int fastboot_en;
+	unsigned int reserved1[(0x30 - 0x24) / 4];
+	unsigned int srst_con;
+};
+check_member(rk3308_sgrf, fastboot_en, 0x20);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3328/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk3328/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3328/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3328/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk3328/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3328/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3368/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk3368/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3368/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3368/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk3368/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3368/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3399/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rk3399/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3399/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rk3399/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rk3399/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rk3399/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/boot0.h
new file mode 100644
index 000000000..0c375e543
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/boot0.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+/*
+ * Execution starts on the instruction following this 4-byte header
+ * (containing the magic 'RK30', 'RK31', 'RK32' or 'RK33').  This
+ * magic constant will be written into the final image by the rkimage
+ * tool, but we need to reserve space for it here.
+ *
+ * To make life easier for everyone, we build the SPL binary with
+ * space for this 4-byte header already included in the binary.
+ */
+#ifdef CONFIG_SPL_BUILD
+	/*
+	 * We need to add 4 bytes of space for the 'RK33' at the
+	 * beginning of the executable.	 However, as we want to keep
+	 * this generic and make it applicable to builds that are like
+	 * the RK3368 (TPL needs this, SPL doesn't) or the RK3399 (no
+	 * TPL, but extra space needed in the SPL), we simply insert
+	 * a branch-to-next-instruction-word with the expectation that
+	 * the first one may be overwritten, if this is the first stage
+	 * contained in the final image created with mkimage)...
+	 */
+	b 1f	 /* if overwritten, entry-address is at the next word */
+1:
+#endif
+#if CONFIG_IS_ENABLED(ROCKCHIP_EARLYRETURN_TO_BROM)
+	adr     r3, entry_counter
+	ldr	r0, [r3]
+	cmp	r0, #1           /* check if entry_counter == 1 */
+	beq	reset            /* regular bootup */
+	add     r0, #1
+	str	r0, [r3]         /* increment the entry_counter in memory */
+	mov     r0, #0           /* return 0 to the BROM to signal 'OK' */
+	bx	lr               /* return control to the BROM */
+entry_counter:
+	.word   0
+#endif
+
+#if (defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARM64))
+	/* U-Boot proper of armv7 do not need this */
+	b reset
+#endif
+
+#if !defined(CONFIG_ARM64)
+	/*
+	 * For armv7, the addr '_start' will used as vector start address
+	 * and write to VBAR register, which needs to aligned to 0x20.
+	 */
+	.align(5), 0x0
+_start:
+	ARM_VECTORS
+#endif
+
+#if !defined(CONFIG_TPL_BUILD) && defined(CONFIG_SPL_BUILD) && \
+	(CONFIG_ROCKCHIP_SPL_RESERVE_IRAM > 0)
+	.space CONFIG_ROCKCHIP_SPL_RESERVE_IRAM	/* space for the ATF data */
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/boot_mode.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/boot_mode.h
new file mode 100644
index 000000000..6b2a610cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/boot_mode.h
@@ -0,0 +1,25 @@
+#ifndef __REBOOT_MODE_H
+#define __REBOOT_MODE_H
+
+/* high 24 bits is tag, low 8 bits is type */
+#define REBOOT_FLAG		0x5242C300
+/* normal boot */
+#define BOOT_NORMAL		(REBOOT_FLAG + 0)
+/* enter loader rockusb mode */
+#define BOOT_LOADER		(REBOOT_FLAG + 1)
+/* enter recovery */
+#define BOOT_RECOVERY		(REBOOT_FLAG + 3)
+/* enter fastboot mode */
+#define BOOT_FASTBOOT		(REBOOT_FLAG + 9)
+/* enter charging mode */
+#define BOOT_CHARGING		(REBOOT_FLAG + 11)
+/* enter usb mass storage mode */
+#define BOOT_UMS		(REBOOT_FLAG + 12)
+/* enter bootrom download mode */
+#define BOOT_BROM_DOWNLOAD	0xEF08A53C
+
+#ifndef __ASSEMBLY__
+int setup_boot_mode(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/bootrom.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/bootrom.h
new file mode 100644
index 000000000..0da78f30b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/bootrom.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2017 Heiko Stuebner <heiko@sntech.de>
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#ifndef _ASM_ARCH_BOOTROM_H
+#define _ASM_ARCH_BOOTROM_H
+
+/*
+ * Saved Stack pointer address.
+ * Access might be needed in some special cases.
+ */
+extern u32 SAVE_SP_ADDR;
+
+/**
+ * back_to_bootrom() - return to bootrom (for TPL/SPL), passing a
+ *                     result code
+ *
+ * Transfer control back to the Rockchip BROM, restoring necessary
+ * register context and passing a command/result code to the BROM
+ * to instruct its next actions (e.g. continue boot sequence, enter
+ * download mode, ...).
+ *
+ * This function does not return.
+ *
+ * @brom_cmd: indicates how the bootrom should continue the boot
+ *            sequence (e.g. load the next stage)
+ */
+enum rockchip_bootrom_cmd {
+	/*
+	 * These can not start at 0, as 0 has a special meaning
+	 * for setjmp().
+	 */
+
+	BROM_BOOT_NEXTSTAGE = 1,  /* continue boot-sequence */
+	BROM_BOOT_ENTER_DNL,      /* have BROM enter download-mode */
+};
+
+void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd);
+
+/**
+ * Boot-device identifiers as used by the BROM
+ */
+enum {
+	BROM_BOOTSOURCE_NAND = 1,
+	BROM_BOOTSOURCE_EMMC = 2,
+	BROM_BOOTSOURCE_SPINOR = 3,
+	BROM_BOOTSOURCE_SPINAND = 4,
+	BROM_BOOTSOURCE_SD = 5,
+	BROM_BOOTSOURCE_USB = 10,
+	BROM_LAST_BOOTSOURCE = BROM_BOOTSOURCE_USB
+};
+
+extern const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1];
+
+/**
+ * Locations of the boot-device identifier in SRAM
+ */
+#define BROM_BOOTSOURCE_ID_ADDR   (CONFIG_IRAM_BASE + 0x10)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/clock.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/clock.h
new file mode 100644
index 000000000..5108180ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/clock.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2015 Google, Inc
+ */
+
+#ifndef _ASM_ARCH_CLOCK_H
+#define _ASM_ARCH_CLOCK_H
+
+struct udevice;
+
+/* define pll mode */
+#define RKCLK_PLL_MODE_SLOW		0
+#define RKCLK_PLL_MODE_NORMAL		1
+#define RKCLK_PLL_MODE_DEEP		2
+
+enum {
+	ROCKCHIP_SYSCON_NOC,
+	ROCKCHIP_SYSCON_GRF,
+	ROCKCHIP_SYSCON_SGRF,
+	ROCKCHIP_SYSCON_PMU,
+	ROCKCHIP_SYSCON_PMUGRF,
+	ROCKCHIP_SYSCON_PMUSGRF,
+	ROCKCHIP_SYSCON_CIC,
+	ROCKCHIP_SYSCON_MSCH,
+};
+
+/* Standard Rockchip clock numbers */
+enum rk_clk_id {
+	CLK_OSC,
+	CLK_ARM,
+	CLK_DDR,
+	CLK_CODEC,
+	CLK_GENERAL,
+	CLK_NEW,
+
+	CLK_COUNT,
+};
+
+#define PLL(_type, _id, _con, _mode, _mshift,			\
+		 _lshift, _pflags, _rtable)			\
+	{							\
+		.id		= _id,				\
+		.type		= _type,			\
+		.con_offset	= _con,				\
+		.mode_offset	= _mode,			\
+		.mode_shift	= _mshift,			\
+		.lock_shift	= _lshift,			\
+		.pll_flags	= _pflags,			\
+		.rate_table	= _rtable,			\
+	}
+
+#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,	\
+			_postdiv2, _dsmpd, _frac)		\
+{								\
+	.rate	= _rate##U,					\
+	.fbdiv = _fbdiv,					\
+	.postdiv1 = _postdiv1,					\
+	.refdiv = _refdiv,					\
+	.postdiv2 = _postdiv2,					\
+	.dsmpd = _dsmpd,					\
+	.frac = _frac,						\
+}
+
+struct rockchip_pll_rate_table {
+	unsigned long rate;
+	unsigned int nr;
+	unsigned int nf;
+	unsigned int no;
+	unsigned int nb;
+	/* for RK3036/RK3399 */
+	unsigned int fbdiv;
+	unsigned int postdiv1;
+	unsigned int refdiv;
+	unsigned int postdiv2;
+	unsigned int dsmpd;
+	unsigned int frac;
+};
+
+enum rockchip_pll_type {
+	pll_rk3036,
+	pll_rk3066,
+	pll_rk3328,
+	pll_rk3366,
+	pll_rk3399,
+};
+
+struct rockchip_pll_clock {
+	unsigned int			id;
+	unsigned int			con_offset;
+	unsigned int			mode_offset;
+	unsigned int			mode_shift;
+	unsigned int			lock_shift;
+	enum rockchip_pll_type		type;
+	unsigned int			pll_flags;
+	struct rockchip_pll_rate_table *rate_table;
+	unsigned int			mode_mask;
+};
+
+struct rockchip_cpu_rate_table {
+	unsigned long rate;
+	unsigned int aclk_div;
+	unsigned int pclk_div;
+};
+
+int rockchip_pll_set_rate(struct rockchip_pll_clock *pll,
+			  void __iomem *base, ulong clk_id,
+			  ulong drate);
+ulong rockchip_pll_get_rate(struct rockchip_pll_clock *pll,
+			    void __iomem *base, ulong clk_id);
+const struct rockchip_cpu_rate_table *
+rockchip_get_cpu_settings(struct rockchip_cpu_rate_table *cpu_table,
+			  ulong rate);
+
+static inline int rk_pll_id(enum rk_clk_id clk_id)
+{
+	return clk_id - 1;
+}
+
+struct sysreset_reg {
+	unsigned int glb_srst_fst_value;
+	unsigned int glb_srst_snd_value;
+};
+
+/**
+ * clk_get_divisor() - Calculate the required clock divisior
+ *
+ * Given an input rate and a required output_rate, calculate the Rockchip
+ * divisor needed to achieve this.
+ *
+ * @input_rate:		Input clock rate in Hz
+ * @output_rate:	Output clock rate in Hz
+ * @return divisor register value to use
+ */
+static inline u32 clk_get_divisor(ulong input_rate, uint output_rate)
+{
+	uint clk_div;
+
+	clk_div = input_rate / output_rate;
+	clk_div = (clk_div + 1) & 0xfffe;
+
+	return clk_div;
+}
+
+/**
+ * rockchip_get_cru() - get a pointer to the clock/reset unit registers
+ *
+ * @return pointer to registers, or -ve error on error
+ */
+void *rockchip_get_cru(void);
+
+/**
+ * rockchip_get_pmucru() - get a pointer to the clock/reset unit registers
+ *
+ * @return pointer to registers, or -ve error on error
+ */
+void *rockchip_get_pmucru(void);
+
+struct rockchip_cru;
+struct rk3288_grf;
+
+void rk3288_clk_configure_cpu(struct rockchip_cru *cru, struct rk3288_grf *grf);
+
+int rockchip_get_clk(struct udevice **devp);
+
+/*
+ * rockchip_reset_bind() - Bind soft reset device as child of clock device
+ *
+ * @pdev: clock udevice
+ * @reg_offset: the first offset in cru for softreset registers
+ * @reg_number: the reg numbers of softreset registers
+ * @return 0 success, or error value
+ */
+int rockchip_reset_bind(struct udevice *pdev, u32 reg_offset, u32 reg_number);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h
new file mode 100644
index 000000000..7445e64b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+  */
+/*
+ * Rockchip Electronics Co., Ltd.
+ */
+
+#ifndef __ASM_ARCH_CPU_RK3288_H
+#define __ASM_ARCH_CPU_RK3288_H
+
+#include <asm/io.h>
+
+#define ROCKCHIP_CPU_MASK       0xffff0000
+#define ROCKCHIP_CPU_RK3288     0x32880000
+
+#define ROCKCHIP_SOC_MASK	(ROCKCHIP_CPU_MASK | 0xff)
+#define ROCKCHIP_SOC_RK3288     (ROCKCHIP_CPU_RK3288 | 0x00)
+#define ROCKCHIP_SOC_RK3288W    (ROCKCHIP_CPU_RK3288 | 0x01)
+
+#define RK3288_HDMI_PHYS	0xff980000
+#define HDMI_CONFIG0_ID		0x4
+#define RK3288W_HDMI_REVID	0x1a
+
+static inline int rockchip_soc_id(void)
+{
+	u8 reg;
+
+#if defined(CONFIG_ROCKCHIP_RK3288)
+	reg = readb(RK3288_HDMI_PHYS + HDMI_CONFIG0_ID);
+	if (reg == RK3288W_HDMI_REVID)
+		return ROCKCHIP_SOC_RK3288W;
+	else
+		return ROCKCHIP_SOC_RK3288;
+#else
+	return 0;
+#endif
+}
+
+#define ROCKCHIP_SOC(id, ID) \
+static inline bool soc_is_##id(void) \
+{ \
+	int soc_id = rockchip_soc_id(); \
+	if (soc_id) \
+		return ((soc_id & ROCKCHIP_SOC_MASK) == ROCKCHIP_SOC_ ##ID); \
+	return false; \
+}
+
+ROCKCHIP_SOC(rk3288, RK3288)
+ROCKCHIP_SOC(rk3288w, RK3288W)
+
+#endif /* __ASM_ARCH_CPU_RK3288_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru.h
new file mode 100644
index 000000000..13ea4aba8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * (C) Copyright 2019 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#ifndef _ROCKCHIP_CLOCK_H
+#define _ROCKCHIP_CLOCK_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#if defined(CONFIG_ROCKCHIP_RK3288)
+# include <asm/arch-rockchip/cru_rk3288.h>
+#elif defined(CONFIG_ROCKCHIP_RK3399)
+# include <asm/arch-rockchip/cru_rk3399.h>
+#endif
+
+/* CRU_GLB_RST_ST */
+enum {
+	GLB_POR_RST,
+	FST_GLB_RST_ST		= BIT(0),
+	SND_GLB_RST_ST		= BIT(1),
+	FST_GLB_TSADC_RST_ST	= BIT(2),
+	SND_GLB_TSADC_RST_ST	= BIT(3),
+	FST_GLB_WDT_RST_ST	= BIT(4),
+	SND_GLB_WDT_RST_ST	= BIT(5),
+};
+
+#define MHz		1000000
+
+char *get_reset_cause(void);
+
+#endif /* _ROCKCHIP_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_px30.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_px30.h
new file mode 100644
index 000000000..732ca3704
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_px30.h
@@ -0,0 +1,449 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ */
+#ifndef _ASM_ARCH_CRU_PX30_H
+#define _ASM_ARCH_CRU_PX30_H
+
+#define MHz		1000000
+#define KHz		1000
+#define OSC_HZ		(24 * MHz)
+
+#define APLL_HZ		(600 * MHz)
+#define GPLL_HZ		(1200 * MHz)
+#define NPLL_HZ		(1188 * MHz)
+#define ACLK_BUS_HZ	(200 * MHz)
+#define HCLK_BUS_HZ	(150 * MHz)
+#define PCLK_BUS_HZ	(100 * MHz)
+#define ACLK_PERI_HZ	(200 * MHz)
+#define HCLK_PERI_HZ	(150 * MHz)
+#define PCLK_PMU_HZ	(100 * MHz)
+
+/* PX30 pll id */
+enum px30_pll_id {
+	APLL,
+	DPLL,
+	CPLL,
+	NPLL,
+	GPLL,
+	PLL_COUNT,
+};
+
+struct px30_clk_priv {
+	struct px30_cru *cru;
+	ulong gpll_hz;
+};
+
+struct px30_pmuclk_priv {
+	struct px30_pmucru *pmucru;
+	ulong gpll_hz;
+};
+
+struct px30_pll {
+	unsigned int con0;
+	unsigned int con1;
+	unsigned int con2;
+	unsigned int con3;
+	unsigned int con4;
+	unsigned int reserved0[3];
+};
+
+struct px30_cru {
+	struct px30_pll pll[4];
+	unsigned int reserved1[8];
+	unsigned int mode;
+	unsigned int misc;
+	unsigned int reserved2[2];
+	unsigned int glb_cnt_th;
+	unsigned int glb_rst_st;
+	unsigned int glb_srst_fst;
+	unsigned int glb_srst_snd;
+	unsigned int glb_rst_con;
+	unsigned int reserved3[7];
+	unsigned int hwffc_con0;
+	unsigned int reserved4;
+	unsigned int hwffc_th;
+	unsigned int hwffc_intst;
+	unsigned int apll_con0_s;
+	unsigned int apll_con1_s;
+	unsigned int clksel_con0_s;
+	unsigned int reserved5;
+	unsigned int clksel_con[60];
+	unsigned int reserved6[4];
+	unsigned int clkgate_con[18];
+	unsigned int reserved7[(0x280 - 0x244) / 4 - 1];
+	unsigned int ssgtbl[32];
+	unsigned int softrst_con[12];
+	unsigned int reserved8[(0x380 - 0x32c) / 4 - 1];
+	unsigned int sdmmc_con[2];
+	unsigned int sdio_con[2];
+	unsigned int emmc_con[2];
+	unsigned int reserved9[(0x400 - 0x394) / 4 - 1];
+	unsigned int autocs_con[8];
+};
+
+check_member(px30_cru, autocs_con[7], 0x41c);
+
+struct px30_pmucru {
+	struct px30_pll pll;
+	unsigned int pmu_mode;
+	unsigned int reserved1[7];
+	unsigned int pmu_clksel_con[6];
+	unsigned int reserved2[10];
+	unsigned int pmu_clkgate_con[2];
+	unsigned int reserved3[14];
+	unsigned int pmu_autocs_con[2];
+};
+
+check_member(px30_pmucru, pmu_autocs_con[1], 0xc4);
+
+struct pll_rate_table {
+	unsigned long rate;
+	unsigned int fbdiv;
+	unsigned int postdiv1;
+	unsigned int refdiv;
+	unsigned int postdiv2;
+	unsigned int dsmpd;
+	unsigned int frac;
+};
+
+struct cpu_rate_table {
+	unsigned long rate;
+	unsigned int aclk_div;
+	unsigned int pclk_div;
+};
+
+enum {
+	/* PLLCON0*/
+	PLL_BP_SHIFT		= 15,
+	PLL_POSTDIV1_SHIFT	= 12,
+	PLL_POSTDIV1_MASK	= 7 << PLL_POSTDIV1_SHIFT,
+	PLL_FBDIV_SHIFT		= 0,
+	PLL_FBDIV_MASK		= 0xfff,
+
+	/* PLLCON1 */
+	PLL_PDSEL_SHIFT		= 15,
+	PLL_PD1_SHIFT		= 14,
+	PLL_PD_SHIFT		= 13,
+	PLL_PD_MASK		= 1 << PLL_PD_SHIFT,
+	PLL_DSMPD_SHIFT		= 12,
+	PLL_DSMPD_MASK		= 1 << PLL_DSMPD_SHIFT,
+	PLL_LOCK_STATUS_SHIFT	= 10,
+	PLL_LOCK_STATUS_MASK	= 1 << PLL_LOCK_STATUS_SHIFT,
+	PLL_POSTDIV2_SHIFT	= 6,
+	PLL_POSTDIV2_MASK	= 7 << PLL_POSTDIV2_SHIFT,
+	PLL_REFDIV_SHIFT	= 0,
+	PLL_REFDIV_MASK		= 0x3f,
+
+	/* PLLCON2 */
+	PLL_FOUT4PHASEPD_SHIFT	= 27,
+	PLL_FOUTVCOPD_SHIFT	= 26,
+	PLL_FOUTPOSTDIVPD_SHIFT	= 25,
+	PLL_DACPD_SHIFT		= 24,
+	PLL_FRAC_DIV	= 0xffffff,
+
+	/* CRU_MODE */
+	PLLMUX_FROM_XIN24M	= 0,
+	PLLMUX_FROM_PLL,
+	PLLMUX_FROM_RTC32K,
+	USBPHY480M_MODE_SHIFT	= 8,
+	USBPHY480M_MODE_MASK	= 3 << USBPHY480M_MODE_SHIFT,
+	NPLL_MODE_SHIFT		= 6,
+	NPLL_MODE_MASK		= 3 << NPLL_MODE_SHIFT,
+	DPLL_MODE_SHIFT		= 4,
+	DPLL_MODE_MASK		= 3 << DPLL_MODE_SHIFT,
+	CPLL_MODE_SHIFT		= 2,
+	CPLL_MODE_MASK		= 3 << CPLL_MODE_SHIFT,
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_MASK		= 3 << APLL_MODE_SHIFT,
+
+	/* CRU_CLK_SEL0_CON */
+	CORE_ACLK_DIV_SHIFT	= 12,
+	CORE_ACLK_DIV_MASK	= 0x07 << CORE_ACLK_DIV_SHIFT,
+	CORE_DBG_DIV_SHIFT	= 8,
+	CORE_DBG_DIV_MASK	= 0x03 << CORE_DBG_DIV_SHIFT,
+	CORE_CLK_PLL_SEL_SHIFT	= 7,
+	CORE_CLK_PLL_SEL_MASK	= 1 << CORE_CLK_PLL_SEL_SHIFT,
+	CORE_CLK_PLL_SEL_APLL	= 0,
+	CORE_CLK_PLL_SEL_GPLL,
+	CORE_DIV_CON_SHIFT	= 0,
+	CORE_DIV_CON_MASK	= 0x0f << CORE_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL3_CON */
+	ACLK_VO_PLL_SHIFT	= 6,
+	ACLK_VO_PLL_MASK	= 0x3 << ACLK_VO_PLL_SHIFT,
+	ACLK_VO_SEL_GPLL	= 0,
+	ACLK_VO_SEL_CPLL,
+	ACLK_VO_SEL_NPLL,
+	ACLK_VO_DIV_SHIFT	= 0,
+	ACLK_VO_DIV_MASK	= 0x1f << ACLK_VO_DIV_SHIFT,
+
+	/* CRU_CLK_SEL5_CON */
+	DCLK_VOPB_SEL_SHIFT	= 14,
+	DCLK_VOPB_SEL_MASK	= 0x3 << DCLK_VOPB_SEL_SHIFT,
+	DCLK_VOPB_SEL_DIVOUT	= 0,
+	DCLK_VOPB_SEL_FRACOUT,
+	DCLK_VOPB_SEL_24M,
+	DCLK_VOPB_PLL_SEL_SHIFT	= 11,
+	DCLK_VOPB_PLL_SEL_MASK	= 0x1 << DCLK_VOPB_PLL_SEL_SHIFT,
+	DCLK_VOPB_PLL_SEL_CPLL	= 0,
+	DCLK_VOPB_PLL_SEL_NPLL,
+	DCLK_VOPB_DIV_SHIFT	= 0,
+	DCLK_VOPB_DIV_MASK	= 0xff,
+
+	/* CRU_CLK_SEL8_CON */
+	DCLK_VOPL_SEL_SHIFT	= 14,
+	DCLK_VOPL_SEL_MASK	= 0x3 << DCLK_VOPL_SEL_SHIFT,
+	DCLK_VOPL_SEL_DIVOUT	= 0,
+	DCLK_VOPL_SEL_FRACOUT,
+	DCLK_VOPL_SEL_24M,
+	DCLK_VOPL_PLL_SEL_SHIFT	= 11,
+	DCLK_VOPL_PLL_SEL_MASK	= 0x1 << DCLK_VOPL_PLL_SEL_SHIFT,
+	DCLK_VOPL_PLL_SEL_NPLL	= 0,
+	DCLK_VOPL_PLL_SEL_CPLL,
+	DCLK_VOPL_DIV_SHIFT	= 0,
+	DCLK_VOPL_DIV_MASK	= 0xff,
+
+	/* CRU_CLK_SEL14_CON */
+	PERI_PLL_SEL_SHIFT	= 15,
+	PERI_PLL_SEL_MASK	= 3 << PERI_PLL_SEL_SHIFT,
+	PERI_PLL_GPLL		= 0,
+	PERI_PLL_CPLL,
+	PERI_HCLK_DIV_SHIFT	= 8,
+	PERI_HCLK_DIV_MASK	= 0x1f << PERI_HCLK_DIV_SHIFT,
+	PERI_ACLK_DIV_SHIFT	= 0,
+	PERI_ACLK_DIV_MASK	= 0x1f << PERI_ACLK_DIV_SHIFT,
+
+	/* CRU_CLKSEL15_CON */
+	NANDC_CLK_SEL_SHIFT	= 15,
+	NANDC_CLK_SEL_MASK	= 0x1 << NANDC_CLK_SEL_SHIFT,
+	NANDC_CLK_SEL_NANDC	= 0,
+	NANDC_CLK_SEL_NANDC_DIV50,
+	NANDC_DIV50_SHIFT	= 8,
+	NANDC_DIV50_MASK	= 0x1f << NANDC_DIV50_SHIFT,
+	NANDC_PLL_SHIFT		= 6,
+	NANDC_PLL_MASK		= 0x3 << NANDC_PLL_SHIFT,
+	NANDC_SEL_GPLL		= 0,
+	NANDC_SEL_CPLL,
+	NANDC_SEL_NPLL,
+	NANDC_DIV_SHIFT		= 0,
+	NANDC_DIV_MASK		= 0x1f << NANDC_DIV_SHIFT,
+
+	/* CRU_CLKSEL20_CON */
+	EMMC_PLL_SHIFT		= 14,
+	EMMC_PLL_MASK		= 3 << EMMC_PLL_SHIFT,
+	EMMC_SEL_GPLL		= 0,
+	EMMC_SEL_CPLL,
+	EMMC_SEL_NPLL,
+	EMMC_SEL_24M,
+	EMMC_DIV_SHIFT		= 0,
+	EMMC_DIV_MASK		= 0xff << EMMC_DIV_SHIFT,
+
+	/* CRU_CLKSEL21_CON */
+	EMMC_CLK_SEL_SHIFT	= 15,
+	EMMC_CLK_SEL_MASK	= 1 << EMMC_CLK_SEL_SHIFT,
+	EMMC_CLK_SEL_EMMC	= 0,
+	EMMC_CLK_SEL_EMMC_DIV50,
+	EMMC_DIV50_SHIFT	= 0,
+	EMMC_DIV50_MASK		= 0xff << EMMC_DIV_SHIFT,
+
+	/* CRU_CLKSEL22_CON */
+	GMAC_PLL_SEL_SHIFT	= 14,
+	GMAC_PLL_SEL_MASK	= 3 << GMAC_PLL_SEL_SHIFT,
+	GMAC_PLL_SEL_GPLL	= 0,
+	GMAC_PLL_SEL_CPLL,
+	GMAC_PLL_SEL_NPLL,
+	CLK_GMAC_DIV_SHIFT	= 8,
+	CLK_GMAC_DIV_MASK	= 0x1f << CLK_GMAC_DIV_SHIFT,
+	SFC_PLL_SEL_SHIFT	= 7,
+	SFC_PLL_SEL_MASK	= 1 << SFC_PLL_SEL_SHIFT,
+	SFC_DIV_CON_SHIFT	= 0,
+	SFC_DIV_CON_MASK	= 0x7f,
+
+	/* CRU_CLK_SEL23_CON */
+	BUS_PLL_SEL_SHIFT	= 15,
+	BUS_PLL_SEL_MASK	= 1 << BUS_PLL_SEL_SHIFT,
+	BUS_PLL_SEL_GPLL	= 0,
+	BUS_PLL_SEL_CPLL,
+	BUS_ACLK_DIV_SHIFT	= 8,
+	BUS_ACLK_DIV_MASK	= 0x1f << BUS_ACLK_DIV_SHIFT,
+	RMII_CLK_SEL_SHIFT	= 7,
+	RMII_CLK_SEL_MASK	= 1 << RMII_CLK_SEL_SHIFT,
+	RMII_CLK_SEL_10M	= 0,
+	RMII_CLK_SEL_100M,
+	RMII_EXTCLK_SEL_SHIFT	= 6,
+	RMII_EXTCLK_SEL_MASK	= 1 << RMII_EXTCLK_SEL_SHIFT,
+	RMII_EXTCLK_SEL_INT	= 0,
+	RMII_EXTCLK_SEL_EXT,
+	PCLK_GMAC_DIV_SHIFT	= 0,
+	PCLK_GMAC_DIV_MASK	= 0x0f << PCLK_GMAC_DIV_SHIFT,
+
+	/* CRU_CLK_SEL24_CON */
+	BUS_PCLK_DIV_SHIFT	= 8,
+	BUS_PCLK_DIV_MASK	= 3 << BUS_PCLK_DIV_SHIFT,
+	BUS_HCLK_DIV_SHIFT	= 0,
+	BUS_HCLK_DIV_MASK	= 0x1f << BUS_HCLK_DIV_SHIFT,
+
+	/* CRU_CLK_SEL25_CON */
+	CRYPTO_APK_SEL_SHIFT	= 14,
+	CRYPTO_APK_PLL_SEL_MASK	= 3 << CRYPTO_APK_SEL_SHIFT,
+	CRYPTO_PLL_SEL_GPLL	= 0,
+	CRYPTO_PLL_SEL_CPLL,
+	CRYPTO_PLL_SEL_NPLL	= 0,
+	CRYPTO_APK_DIV_SHIFT	= 8,
+	CRYPTO_APK_DIV_MASK	= 0x1f << CRYPTO_APK_DIV_SHIFT,
+	CRYPTO_PLL_SEL_SHIFT	= 6,
+	CRYPTO_PLL_SEL_MASK	= 3 << CRYPTO_PLL_SEL_SHIFT,
+	CRYPTO_DIV_SHIFT	= 0,
+	CRYPTO_DIV_MASK		= 0x1f << CRYPTO_DIV_SHIFT,
+
+	/* CRU_CLK_SEL30_CON */
+	CLK_I2S1_DIV_CON_MASK	= 0x7f,
+	CLK_I2S1_PLL_SEL_MASK	= 0X1 << 8,
+	CLK_I2S1_PLL_SEL_GPLL	= 0X0 << 8,
+	CLK_I2S1_PLL_SEL_NPLL	= 0X1 << 8,
+	CLK_I2S1_SEL_MASK	= 0x3 << 10,
+	CLK_I2S1_SEL_I2S1	= 0x0 << 10,
+	CLK_I2S1_SEL_FRAC	= 0x1 << 10,
+	CLK_I2S1_SEL_MCLK_IN	= 0x2 << 10,
+	CLK_I2S1_SEL_OSC	= 0x3 << 10,
+	CLK_I2S1_OUT_SEL_MASK	= 0x1 << 15,
+	CLK_I2S1_OUT_SEL_I2S1	= 0x0 << 15,
+	CLK_I2S1_OUT_SEL_OSC	= 0x1 << 15,
+
+	/* CRU_CLK_SEL31_CON */
+	CLK_I2S1_FRAC_NUMERATOR_SHIFT	= 16,
+	CLK_I2S1_FRAC_NUMERATOR_MASK	= 0xffff << 16,
+	CLK_I2S1_FRAC_DENOMINATOR_SHIFT	= 0,
+	CLK_I2S1_FRAC_DENOMINATOR_MASK	= 0xffff,
+
+	/* CRU_CLK_SEL34_CON */
+	UART1_PLL_SEL_SHIFT	= 14,
+	UART1_PLL_SEL_MASK	= 3 << UART1_PLL_SEL_SHIFT,
+	UART1_PLL_SEL_GPLL	= 0,
+	UART1_PLL_SEL_24M,
+	UART1_PLL_SEL_480M,
+	UART1_PLL_SEL_NPLL,
+	UART1_DIV_CON_SHIFT	= 0,
+	UART1_DIV_CON_MASK	= 0x1f << UART1_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL35_CON */
+	UART1_CLK_SEL_SHIFT	= 14,
+	UART1_CLK_SEL_MASK	= 3 << UART1_PLL_SEL_SHIFT,
+	UART1_CLK_SEL_UART1	= 0,
+	UART1_CLK_SEL_UART1_NP5,
+	UART1_CLK_SEL_UART1_FRAC,
+	UART1_DIVNP5_SHIFT	= 0,
+	UART1_DIVNP5_MASK	= 0x1f << UART1_DIVNP5_SHIFT,
+
+	/* CRU_CLK_SEL37_CON */
+	UART2_PLL_SEL_SHIFT	= 14,
+	UART2_PLL_SEL_MASK	= 3 << UART2_PLL_SEL_SHIFT,
+	UART2_PLL_SEL_GPLL	= 0,
+	UART2_PLL_SEL_24M,
+	UART2_PLL_SEL_480M,
+	UART2_PLL_SEL_NPLL,
+	UART2_DIV_CON_SHIFT	= 0,
+	UART2_DIV_CON_MASK	= 0x1f << UART2_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL38_CON */
+	UART2_CLK_SEL_SHIFT	= 14,
+	UART2_CLK_SEL_MASK	= 3 << UART2_PLL_SEL_SHIFT,
+	UART2_CLK_SEL_UART2	= 0,
+	UART2_CLK_SEL_UART2_NP5,
+	UART2_CLK_SEL_UART2_FRAC,
+	UART2_DIVNP5_SHIFT	= 0,
+	UART2_DIVNP5_MASK	= 0x1f << UART2_DIVNP5_SHIFT,
+
+	/* CRU_CLK_SEL40_CON */
+	UART3_PLL_SEL_SHIFT	= 14,
+	UART3_PLL_SEL_MASK	= 3 << UART3_PLL_SEL_SHIFT,
+	UART3_PLL_SEL_GPLL	= 0,
+	UART3_PLL_SEL_24M,
+	UART3_PLL_SEL_480M,
+	UART3_PLL_SEL_NPLL,
+	UART3_DIV_CON_SHIFT	= 0,
+	UART3_DIV_CON_MASK	= 0x1f << UART3_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL41_CON */
+	UART3_CLK_SEL_SHIFT	= 14,
+	UART3_CLK_SEL_MASK	= 3 << UART3_PLL_SEL_SHIFT,
+	UART3_CLK_SEL_UART3	= 0,
+	UART3_CLK_SEL_UART3_NP5,
+	UART3_CLK_SEL_UART3_FRAC,
+	UART3_DIVNP5_SHIFT	= 0,
+	UART3_DIVNP5_MASK	= 0x1f << UART3_DIVNP5_SHIFT,
+
+	/* CRU_CLK_SEL46_CON */
+	UART5_PLL_SEL_SHIFT	= 14,
+	UART5_PLL_SEL_MASK	= 3 << UART5_PLL_SEL_SHIFT,
+	UART5_PLL_SEL_GPLL	= 0,
+	UART5_PLL_SEL_24M,
+	UART5_PLL_SEL_480M,
+	UART5_PLL_SEL_NPLL,
+	UART5_DIV_CON_SHIFT	= 0,
+	UART5_DIV_CON_MASK	= 0x1f << UART5_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL47_CON */
+	UART5_CLK_SEL_SHIFT	= 14,
+	UART5_CLK_SEL_MASK	= 3 << UART5_PLL_SEL_SHIFT,
+	UART5_CLK_SEL_UART5	= 0,
+	UART5_CLK_SEL_UART5_NP5,
+	UART5_CLK_SEL_UART5_FRAC,
+	UART5_DIVNP5_SHIFT	= 0,
+	UART5_DIVNP5_MASK	= 0x1f << UART5_DIVNP5_SHIFT,
+
+	/* CRU_CLK_SEL49_CON */
+	CLK_I2C_PLL_SEL_GPLL		= 0,
+	CLK_I2C_PLL_SEL_24M,
+	CLK_I2C_DIV_CON_MASK		= 0x7f,
+	CLK_I2C_PLL_SEL_MASK		= 1,
+	CLK_I2C1_PLL_SEL_SHIFT		= 15,
+	CLK_I2C1_DIV_CON_SHIFT		= 8,
+	CLK_I2C0_PLL_SEL_SHIFT		= 7,
+	CLK_I2C0_DIV_CON_SHIFT		= 0,
+
+	/* CRU_CLK_SEL50_CON */
+	CLK_I2C3_PLL_SEL_SHIFT		= 15,
+	CLK_I2C3_DIV_CON_SHIFT		= 8,
+	CLK_I2C2_PLL_SEL_SHIFT		= 7,
+	CLK_I2C2_DIV_CON_SHIFT		= 0,
+
+	/* CRU_CLK_SEL52_CON */
+	CLK_PWM_PLL_SEL_GPLL		= 0,
+	CLK_PWM_PLL_SEL_24M,
+	CLK_PWM_DIV_CON_MASK		= 0x7f,
+	CLK_PWM_PLL_SEL_MASK		= 1,
+	CLK_PWM1_PLL_SEL_SHIFT		= 15,
+	CLK_PWM1_DIV_CON_SHIFT		= 8,
+	CLK_PWM0_PLL_SEL_SHIFT		= 7,
+	CLK_PWM0_DIV_CON_SHIFT		= 0,
+
+	/* CRU_CLK_SEL53_CON */
+	CLK_SPI_PLL_SEL_GPLL		= 0,
+	CLK_SPI_PLL_SEL_24M,
+	CLK_SPI_DIV_CON_MASK		= 0x7f,
+	CLK_SPI_PLL_SEL_MASK		= 1,
+	CLK_SPI1_PLL_SEL_SHIFT		= 15,
+	CLK_SPI1_DIV_CON_SHIFT		= 8,
+	CLK_SPI0_PLL_SEL_SHIFT		= 7,
+	CLK_SPI0_DIV_CON_SHIFT		= 0,
+
+	/* CRU_CLK_SEL55_CON */
+	CLK_SARADC_DIV_CON_SHIFT	= 0,
+	CLK_SARADC_DIV_CON_MASK		= 0x7ff,
+
+	/* CRU_CLK_GATE10_CON */
+	CLK_I2S1_OUT_MCLK_PAD_MASK	= 0x1 << 9,
+	CLK_I2S1_OUT_MCLK_PAD_ENABLE	= 0x1 << 9,
+	CLK_I2S1_OUT_MCLK_PAD_DISABLE	= 0x0 << 9,
+
+	/* CRU_PMU_MODE */
+	GPLL_MODE_SHIFT			= 0,
+	GPLL_MODE_MASK			= 3 << GPLL_MODE_SHIFT,
+
+	/* CRU_PMU_CLK_SEL0_CON */
+	CLK_PMU_PCLK_DIV_SHIFT		= 0,
+	CLK_PMU_PCLK_DIV_MASK		= 0x1f << CLK_PMU_PCLK_DIV_SHIFT,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3036.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3036.h
new file mode 100644
index 000000000..5db0407ba
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3036.h
@@ -0,0 +1,171 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ */
+#ifndef _ASM_ARCH_CRU_RK3036_H
+#define _ASM_ARCH_CRU_RK3036_H
+
+#define OSC_HZ		(24 * 1000 * 1000)
+
+#define APLL_HZ		(600 * 1000000)
+#define GPLL_HZ		(594 * 1000000)
+
+#define CORE_PERI_HZ	150000000
+#define CORE_ACLK_HZ	300000000
+
+#define BUS_ACLK_HZ	148500000
+#define BUS_HCLK_HZ	148500000
+#define BUS_PCLK_HZ	74250000
+
+#define PERI_ACLK_HZ	148500000
+#define PERI_HCLK_HZ	148500000
+#define PERI_PCLK_HZ	74250000
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk3036_clk_priv {
+	struct rk3036_cru *cru;
+	ulong rate;
+};
+
+struct rk3036_cru {
+	struct rk3036_pll {
+		unsigned int con0;
+		unsigned int con1;
+		unsigned int con2;
+		unsigned int con3;
+	} pll[4];
+	unsigned int cru_mode_con;
+	unsigned int cru_clksel_con[35];
+	unsigned int cru_clkgate_con[11];
+	unsigned int reserved;
+	unsigned int cru_glb_srst_fst_value;
+	unsigned int cru_glb_srst_snd_value;
+	unsigned int reserved1[2];
+	unsigned int cru_softrst_con[9];
+	unsigned int cru_misc_con;
+	unsigned int reserved2[2];
+	unsigned int cru_glb_cnt_th;
+	unsigned int cru_sdmmc_con[2];
+	unsigned int cru_sdio_con[2];
+	unsigned int cru_emmc_con[2];
+	unsigned int reserved3;
+	unsigned int cru_rst_st;
+	unsigned int reserved4[0x23];
+	unsigned int cru_pll_mask_con;
+};
+check_member(rk3036_cru, cru_pll_mask_con, 0x01f0);
+
+struct pll_div {
+	u32 refdiv;
+	u32 fbdiv;
+	u32 postdiv1;
+	u32 postdiv2;
+	u32 frac;
+};
+
+enum {
+	/* PLLCON0*/
+	PLL_POSTDIV1_SHIFT	= 12,
+	PLL_POSTDIV1_MASK	= 7 << PLL_POSTDIV1_SHIFT,
+	PLL_FBDIV_SHIFT		= 0,
+	PLL_FBDIV_MASK		= 0xfff,
+
+	/* PLLCON1 */
+	PLL_RST_SHIFT		= 14,
+	PLL_DSMPD_SHIFT		= 12,
+	PLL_DSMPD_MASK		= 1 << PLL_DSMPD_SHIFT,
+	PLL_LOCK_STATUS_SHIFT	= 10,
+	PLL_LOCK_STATUS_MASK	= 1 << PLL_LOCK_STATUS_SHIFT,
+	PLL_POSTDIV2_SHIFT	= 6,
+	PLL_POSTDIV2_MASK	= 7 << PLL_POSTDIV2_SHIFT,
+	PLL_REFDIV_SHIFT	= 0,
+	PLL_REFDIV_MASK		= 0x3f,
+
+	/* CRU_MODE */
+	GPLL_MODE_SHIFT		= 12,
+	GPLL_MODE_MASK		= 3 << GPLL_MODE_SHIFT,
+	GPLL_MODE_SLOW		= 0,
+	GPLL_MODE_NORM,
+	GPLL_MODE_DEEP,
+	DPLL_MODE_SHIFT		= 4,
+	DPLL_MODE_MASK		= 1 << DPLL_MODE_SHIFT,
+	DPLL_MODE_SLOW		= 0,
+	DPLL_MODE_NORM,
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_MASK		= 1 << APLL_MODE_SHIFT,
+	APLL_MODE_SLOW		= 0,
+	APLL_MODE_NORM,
+
+	/* CRU_CLK_SEL0_CON */
+	BUS_ACLK_PLL_SEL_SHIFT	= 14,
+	BUS_ACLK_PLL_SEL_MASK	= 3 << BUS_ACLK_PLL_SEL_SHIFT,
+	BUS_ACLK_PLL_SEL_APLL	= 0,
+	BUS_ACLK_PLL_SEL_DPLL,
+	BUS_ACLK_PLL_SEL_GPLL,
+	BUS_ACLK_DIV_SHIFT	= 8,
+	BUS_ACLK_DIV_MASK	= 0x1f << BUS_ACLK_DIV_SHIFT,
+	CORE_CLK_PLL_SEL_SHIFT	= 7,
+	CORE_CLK_PLL_SEL_MASK	= 1 << CORE_CLK_PLL_SEL_SHIFT,
+	CORE_CLK_PLL_SEL_APLL	= 0,
+	CORE_CLK_PLL_SEL_GPLL,
+	CORE_DIV_CON_SHIFT	= 0,
+	CORE_DIV_CON_MASK	= 0x1f << CORE_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL1_CON */
+	BUS_PCLK_DIV_SHIFT	= 12,
+	BUS_PCLK_DIV_MASK	= 7 << BUS_PCLK_DIV_SHIFT,
+	BUS_HCLK_DIV_SHIFT	= 8,
+	BUS_HCLK_DIV_MASK	= 3 << BUS_HCLK_DIV_SHIFT,
+	CORE_ACLK_DIV_SHIFT	= 4,
+	CORE_ACLK_DIV_MASK	= 7 << CORE_ACLK_DIV_SHIFT,
+	CORE_PERI_DIV_SHIFT	= 0,
+	CORE_PERI_DIV_MASK	= 0xf << CORE_PERI_DIV_SHIFT,
+
+	/* CRU_CLKSEL10_CON */
+	PERI_PLL_SEL_SHIFT	= 14,
+	PERI_PLL_SEL_MASK	= 3 << PERI_PLL_SEL_SHIFT,
+	PERI_PLL_APLL		= 0,
+	PERI_PLL_DPLL,
+	PERI_PLL_GPLL,
+	PERI_PCLK_DIV_SHIFT	= 12,
+	PERI_PCLK_DIV_MASK	= 3 << PERI_PCLK_DIV_SHIFT,
+	PERI_HCLK_DIV_SHIFT	= 8,
+	PERI_HCLK_DIV_MASK	= 3 << PERI_HCLK_DIV_SHIFT,
+	PERI_ACLK_DIV_SHIFT	= 0,
+	PERI_ACLK_DIV_MASK	= 0x1f << PERI_ACLK_DIV_SHIFT,
+
+	/* CRU_CLKSEL11_CON */
+	SDIO_DIV_SHIFT		= 8,
+	SDIO_DIV_MASK		= 0x7f << SDIO_DIV_SHIFT,
+	MMC0_DIV_SHIFT		= 0,
+	MMC0_DIV_MASK		= 0x7f << MMC0_DIV_SHIFT,
+
+	/* CRU_CLKSEL12_CON */
+	EMMC_PLL_SHIFT		= 12,
+	EMMC_PLL_MASK		= 3 << EMMC_PLL_SHIFT,
+	EMMC_SEL_APLL		= 0,
+	EMMC_SEL_DPLL,
+	EMMC_SEL_GPLL,
+	EMMC_SEL_24M,
+	SDIO_PLL_SHIFT		= 10,
+	SDIO_PLL_MASK		= 3 << SDIO_PLL_SHIFT,
+	SDIO_SEL_APLL		= 0,
+	SDIO_SEL_DPLL,
+	SDIO_SEL_GPLL,
+	SDIO_SEL_24M,
+	MMC0_PLL_SHIFT		= 8,
+	MMC0_PLL_MASK		= 3 << MMC0_PLL_SHIFT,
+	MMC0_SEL_APLL		= 0,
+	MMC0_SEL_DPLL,
+	MMC0_SEL_GPLL,
+	MMC0_SEL_24M,
+	EMMC_DIV_SHIFT		= 0,
+	EMMC_DIV_MASK		= 0x7f << EMMC_DIV_SHIFT,
+
+	/* CRU_SOFTRST5_CON */
+	DDRCTRL_PSRST_SHIFT	= 11,
+	DDRCTRL_SRST_SHIFT	= 10,
+	DDRPHY_PSRST_SHIFT	= 9,
+	DDRPHY_SRST_SHIFT	= 8,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3128.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3128.h
new file mode 100644
index 000000000..cca812d29
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3128.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_CRU_RK3128_H
+#define _ASM_ARCH_CRU_RK3128_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define MHz		1000000
+#define OSC_HZ		(24 * MHz)
+
+#define APLL_HZ		(600 * MHz)
+#define GPLL_HZ		(594 * MHz)
+
+#define CORE_PERI_HZ	150000000
+#define CORE_ACLK_HZ	300000000
+
+#define BUS_ACLK_HZ	148500000
+#define BUS_HCLK_HZ	148500000
+#define BUS_PCLK_HZ	74250000
+
+#define PERI_ACLK_HZ	148500000
+#define PERI_HCLK_HZ	148500000
+#define PERI_PCLK_HZ	74250000
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk3128_clk_priv {
+	struct rk3128_cru *cru;
+};
+
+struct rk3128_cru {
+	struct rk3128_pll {
+		unsigned int con0;
+		unsigned int con1;
+		unsigned int con2;
+		unsigned int con3;
+	} pll[4];
+	unsigned int cru_mode_con;
+	unsigned int cru_clksel_con[35];
+	unsigned int cru_clkgate_con[11];
+	unsigned int reserved;
+	unsigned int cru_glb_srst_fst_value;
+	unsigned int cru_glb_srst_snd_value;
+	unsigned int reserved1[2];
+	unsigned int cru_softrst_con[9];
+	unsigned int cru_misc_con;
+	unsigned int reserved2[2];
+	unsigned int cru_glb_cnt_th;
+	unsigned int reserved3[3];
+	unsigned int cru_glb_rst_st;
+	unsigned int reserved4[(0x1c0 - 0x150) / 4 - 1];
+	unsigned int cru_sdmmc_con[2];
+	unsigned int cru_sdio_con[2];
+	unsigned int reserved5[2];
+	unsigned int cru_emmc_con[2];
+	unsigned int reserved6[4];
+	unsigned int cru_pll_prg_en;
+};
+check_member(rk3128_cru, cru_pll_prg_en, 0x01f0);
+
+struct pll_div {
+	u32 refdiv;
+	u32 fbdiv;
+	u32 postdiv1;
+	u32 postdiv2;
+	u32 frac;
+};
+
+enum {
+	/* PLLCON0*/
+	PLL_POSTDIV1_SHIFT	= 12,
+	PLL_POSTDIV1_MASK	= 7 << PLL_POSTDIV1_SHIFT,
+	PLL_FBDIV_SHIFT		= 0,
+	PLL_FBDIV_MASK		= 0xfff,
+
+	/* PLLCON1 */
+	PLL_RST_SHIFT		= 14,
+	PLL_PD_SHIFT		= 13,
+	PLL_PD_MASK		= 1 << PLL_PD_SHIFT,
+	PLL_DSMPD_SHIFT		= 12,
+	PLL_DSMPD_MASK		= 1 << PLL_DSMPD_SHIFT,
+	PLL_LOCK_STATUS_SHIFT	= 10,
+	PLL_LOCK_STATUS_MASK	= 1 << PLL_LOCK_STATUS_SHIFT,
+	PLL_POSTDIV2_SHIFT	= 6,
+	PLL_POSTDIV2_MASK	= 7 << PLL_POSTDIV2_SHIFT,
+	PLL_REFDIV_SHIFT	= 0,
+	PLL_REFDIV_MASK		= 0x3f,
+
+	/* CRU_MODE */
+	GPLL_MODE_SHIFT		= 12,
+	GPLL_MODE_MASK		= 3 << GPLL_MODE_SHIFT,
+	GPLL_MODE_SLOW		= 0,
+	GPLL_MODE_NORM,
+	GPLL_MODE_DEEP,
+	CPLL_MODE_SHIFT		= 8,
+	CPLL_MODE_MASK		= 1 << CPLL_MODE_SHIFT,
+	CPLL_MODE_SLOW		= 0,
+	CPLL_MODE_NORM,
+	DPLL_MODE_SHIFT		= 4,
+	DPLL_MODE_MASK		= 1 << DPLL_MODE_SHIFT,
+	DPLL_MODE_SLOW		= 0,
+	DPLL_MODE_NORM,
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_MASK		= 1 << APLL_MODE_SHIFT,
+	APLL_MODE_SLOW		= 0,
+	APLL_MODE_NORM,
+
+	/* CRU_CLK_SEL0_CON */
+	BUS_ACLK_PLL_SEL_SHIFT	= 14,
+	BUS_ACLK_PLL_SEL_MASK	= 3 << BUS_ACLK_PLL_SEL_SHIFT,
+	BUS_ACLK_PLL_SEL_CPLL	= 0,
+	BUS_ACLK_PLL_SEL_GPLL,
+	BUS_ACLK_PLL_SEL_GPLL_DIV2,
+	BUS_ACLK_PLL_SEL_GPLL_DIV3,
+	BUS_ACLK_DIV_SHIFT	= 8,
+	BUS_ACLK_DIV_MASK	= 0x1f << BUS_ACLK_DIV_SHIFT,
+	CORE_CLK_PLL_SEL_SHIFT	= 7,
+	CORE_CLK_PLL_SEL_MASK	= 1 << CORE_CLK_PLL_SEL_SHIFT,
+	CORE_CLK_PLL_SEL_APLL	= 0,
+	CORE_CLK_PLL_SEL_GPLL_DIV2,
+	CORE_DIV_CON_SHIFT	= 0,
+	CORE_DIV_CON_MASK	= 0x1f << CORE_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL1_CON */
+	BUS_PCLK_DIV_SHIFT	= 12,
+	BUS_PCLK_DIV_MASK	= 7 << BUS_PCLK_DIV_SHIFT,
+	BUS_HCLK_DIV_SHIFT	= 8,
+	BUS_HCLK_DIV_MASK	= 3 << BUS_HCLK_DIV_SHIFT,
+	CORE_ACLK_DIV_SHIFT	= 4,
+	CORE_ACLK_DIV_MASK	= 7 << CORE_ACLK_DIV_SHIFT,
+	CORE_PERI_DIV_SHIFT	= 0,
+	CORE_PERI_DIV_MASK	= 0xf << CORE_PERI_DIV_SHIFT,
+
+	/* CRU_CLK_SEL2_CON */
+	NANDC_PLL_SEL_SHIFT	= 14,
+	NANDC_PLL_SEL_MASK	= 3 << NANDC_PLL_SEL_SHIFT,
+	NANDC_PLL_SEL_CPLL	= 0,
+	NANDC_PLL_SEL_GPLL,
+	NANDC_CLK_DIV_SHIFT	= 8,
+	NANDC_CLK_DIV_MASK	= 0x1f << NANDC_CLK_DIV_SHIFT,
+	PVTM_CLK_DIV_SHIFT	= 0,
+	PVTM_CLK_DIV_MASK	= 0x3f << PVTM_CLK_DIV_SHIFT,
+
+	/* CRU_CLKSEL10_CON */
+	PERI_PLL_SEL_SHIFT	= 14,
+	PERI_PLL_SEL_MASK	= 1 << PERI_PLL_SEL_SHIFT,
+	PERI_PLL_APLL		= 0,
+	PERI_PLL_DPLL,
+	PERI_PLL_GPLL,
+	PERI_PCLK_DIV_SHIFT	= 12,
+	PERI_PCLK_DIV_MASK	= 3 << PERI_PCLK_DIV_SHIFT,
+	PERI_HCLK_DIV_SHIFT	= 8,
+	PERI_HCLK_DIV_MASK	= 3 << PERI_HCLK_DIV_SHIFT,
+	PERI_ACLK_DIV_SHIFT	= 0,
+	PERI_ACLK_DIV_MASK	= 0x1f << PERI_ACLK_DIV_SHIFT,
+
+	/* CRU_CLKSEL11_CON */
+	MMC0_PLL_SHIFT		= 6,
+	MMC0_PLL_MASK		= 3 << MMC0_PLL_SHIFT,
+	MMC0_SEL_APLL		= 0,
+	MMC0_SEL_GPLL,
+	MMC0_SEL_GPLL_DIV2,
+	MMC0_SEL_24M,
+	MMC0_DIV_SHIFT		= 0,
+	MMC0_DIV_MASK		= 0x3f << MMC0_DIV_SHIFT,
+
+	/* CRU_CLKSEL12_CON */
+	EMMC_PLL_SHIFT		= 14,
+	EMMC_PLL_MASK		= 3 << EMMC_PLL_SHIFT,
+	EMMC_SEL_APLL		= 0,
+	EMMC_SEL_GPLL,
+	EMMC_SEL_GPLL_DIV2,
+	EMMC_SEL_24M,
+	EMMC_DIV_SHIFT		= 8,
+	EMMC_DIV_MASK		= 0x3f << EMMC_DIV_SHIFT,
+
+	/* CLKSEL_CON24 */
+	SARADC_DIV_CON_SHIFT	= 8,
+	SARADC_DIV_CON_MASK	= GENMASK(15, 8),
+	SARADC_DIV_CON_WIDTH	= 8,
+
+	/* CRU_CLKSEL27_CON*/
+	DCLK_VOP_SEL_SHIFT         = 0,
+	DCLK_VOP_SEL_MASK          = 1 << DCLK_VOP_SEL_SHIFT,
+	DCLK_VOP_PLL_SEL_CPLL           = 0,
+	DCLK_VOP_DIV_CON_SHIFT          = 8,
+	DCLK_VOP_DIV_CON_MASK           = 0xff << DCLK_VOP_DIV_CON_SHIFT,
+
+	/* CRU_CLKSEL31_CON */
+	VIO0_PLL_SHIFT		= 5,
+	VIO0_PLL_MASK		= 7 << VIO0_PLL_SHIFT,
+	VI00_SEL_CPLL		= 0,
+	VIO0_SEL_GPLL,
+	VIO0_DIV_SHIFT		= 0,
+	VIO0_DIV_MASK		= 0x1f << VIO0_DIV_SHIFT,
+	VIO1_PLL_SHIFT		= 13,
+	VIO1_PLL_MASK		= 7 << VIO1_PLL_SHIFT,
+	VI01_SEL_CPLL		= 0,
+	VIO1_SEL_GPLL,
+	VIO1_DIV_SHIFT		= 8,
+	VIO1_DIV_MASK		= 0x1f << VIO1_DIV_SHIFT,
+
+	/* CRU_SOFTRST5_CON */
+	DDRCTRL_PSRST_SHIFT	= 11,
+	DDRCTRL_SRST_SHIFT	= 10,
+	DDRPHY_PSRST_SHIFT	= 9,
+	DDRPHY_SRST_SHIFT	= 8,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3188.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3188.h
new file mode 100644
index 000000000..eec4815bb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3188.h
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Heiko Stuebner <heiko@sntech.de>
+ */
+#ifndef _ASM_ARCH_CRU_RK3188_H
+#define _ASM_ARCH_CRU_RK3188_H
+
+#define OSC_HZ		(24 * 1000 * 1000)
+
+#define APLL_HZ		(1608 * 1000000)
+#define APLL_SAFE_HZ	(600 * 1000000)
+#define GPLL_HZ		(594 * 1000000)
+#define CPLL_HZ		(384 * 1000000)
+
+/* The SRAM is clocked off aclk_cpu, so we want to max it out for boot speed */
+#define CPU_ACLK_HZ	297000000
+#define CPU_HCLK_HZ	148500000
+#define CPU_PCLK_HZ	74250000
+#define CPU_H2P_HZ	74250000
+
+#define PERI_ACLK_HZ	148500000
+#define PERI_HCLK_HZ	148500000
+#define PERI_PCLK_HZ	74250000
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk3188_clk_priv {
+	struct rk3188_grf *grf;
+	struct rk3188_cru *cru;
+	ulong rate;
+	bool has_bwadj;
+};
+
+struct rk3188_cru {
+	struct rk3188_pll {
+		u32 con0;
+		u32 con1;
+		u32 con2;
+		u32 con3;
+	} pll[4];
+	u32 cru_mode_con;
+	u32 cru_clksel_con[35];
+	u32 cru_clkgate_con[10];
+	u32 reserved1[2];
+	u32 cru_glb_srst_fst_value;
+	u32 cru_glb_srst_snd_value;
+	u32 reserved2[2];
+	u32 cru_softrst_con[9];
+	u32 cru_misc_con;
+	u32 reserved3[2];
+	u32 cru_glb_cnt_th;
+};
+check_member(rk3188_cru, cru_glb_cnt_th, 0x0140);
+
+/* CRU_CLKSEL0_CON */
+enum {
+	/* a9_core_div: core = core_src / (a9_core_div + 1) */
+	A9_CORE_DIV_SHIFT	= 9,
+	A9_CORE_DIV_MASK	= 0x1f,
+	CORE_PLL_SHIFT		= 8,
+	CORE_PLL_MASK		= 1,
+	CORE_PLL_SELECT_APLL	= 0,
+	CORE_PLL_SELECT_GPLL,
+
+	/* core peri div: core:core_peri = 2:1, 4:1, 8:1 or 16:1 */
+	CORE_PERI_DIV_SHIFT	= 6,
+	CORE_PERI_DIV_MASK	= 3,
+
+	/* aclk_cpu pll selection */
+	CPU_ACLK_PLL_SHIFT	= 5,
+	CPU_ACLK_PLL_MASK	= 1,
+	CPU_ACLK_PLL_SELECT_APLL	= 0,
+	CPU_ACLK_PLL_SELECT_GPLL,
+
+	/* a9_cpu_div: aclk_cpu = cpu_src / (a9_cpu_div + 1) */
+	A9_CPU_DIV_SHIFT	= 0,
+	A9_CPU_DIV_MASK		= 0x1f,
+};
+
+/* CRU_CLKSEL1_CON */
+enum {
+	/* ahb2apb_pclk_div: hclk_cpu:pclk_cpu = 1:1, 2:1 or 4:1 */
+	AHB2APB_DIV_SHIFT	= 14,
+	AHB2APB_DIV_MASK	= 3,
+
+	/* cpu_pclk_div: aclk_cpu:pclk_cpu = 1:1, 2:1, 4:1 or 8:1 */
+	CPU_PCLK_DIV_SHIFT	= 12,
+	CPU_PCLK_DIV_MASK	= 3,
+
+	/* cpu_hclk_div: aclk_cpu:hclk_cpu = 1:1, 2:1 or 4:1 */
+	CPU_HCLK_DIV_SHIFT	= 8,
+	CPU_HCLK_DIV_MASK	= 3,
+
+	/* core_aclk_div: cire:aclk_core = 1:1, 2:1, 3:1, 4:1 or 8:1 */
+	CORE_ACLK_DIV_SHIFT	= 3,
+	CORE_ACLK_DIV_MASK	= 7,
+};
+
+/* CRU_CLKSEL10_CON */
+enum {
+	PERI_SEL_PLL_MASK	= 1,
+	PERI_SEL_PLL_SHIFT	= 15,
+	PERI_SEL_CPLL		= 0,
+	PERI_SEL_GPLL,
+
+	/* peri pclk div: aclk_bus:pclk_bus = 1:1, 2:1, 4:1 or 8:1 */
+	PERI_PCLK_DIV_SHIFT	= 12,
+	PERI_PCLK_DIV_MASK	= 3,
+
+	/* peripheral bus hclk div:aclk_bus: hclk_bus = 1:1, 2:1 or 4:1 */
+	PERI_HCLK_DIV_SHIFT	= 8,
+	PERI_HCLK_DIV_MASK	= 3,
+
+	/* peri aclk div: aclk_peri = periph_src / (peri_aclk_div + 1) */
+	PERI_ACLK_DIV_SHIFT	= 0,
+	PERI_ACLK_DIV_MASK	= 0x1f,
+};
+/* CRU_CLKSEL11_CON */
+enum {
+	HSICPHY_DIV_SHIFT	= 8,
+	HSICPHY_DIV_MASK	= 0x3f,
+
+	MMC0_DIV_SHIFT		= 0,
+	MMC0_DIV_MASK		= 0x3f,
+};
+
+/* CRU_CLKSEL12_CON */
+enum {
+	UART_PLL_SHIFT		= 15,
+	UART_PLL_MASK		= 1,
+	UART_PLL_SELECT_GENERAL	= 0,
+	UART_PLL_SELECT_CODEC,
+
+	EMMC_DIV_SHIFT		= 8,
+	EMMC_DIV_MASK		= 0x3f,
+
+	SDIO_DIV_SHIFT		= 0,
+	SDIO_DIV_MASK		= 0x3f,
+};
+
+/* CRU_CLKSEL25_CON */
+enum {
+	SPI1_DIV_SHIFT		= 8,
+	SPI1_DIV_MASK		= 0x7f,
+
+	SPI0_DIV_SHIFT		= 0,
+	SPI0_DIV_MASK		= 0x7f,
+};
+
+/* CRU_MODE_CON */
+enum {
+	GPLL_MODE_SHIFT		= 12,
+	GPLL_MODE_MASK		= 3,
+	GPLL_MODE_SLOW		= 0,
+	GPLL_MODE_NORMAL,
+	GPLL_MODE_DEEP,
+
+	CPLL_MODE_SHIFT		= 8,
+	CPLL_MODE_MASK		= 3,
+	CPLL_MODE_SLOW		= 0,
+	CPLL_MODE_NORMAL,
+	CPLL_MODE_DEEP,
+
+	DPLL_MODE_SHIFT		= 4,
+	DPLL_MODE_MASK		= 3,
+	DPLL_MODE_SLOW		= 0,
+	DPLL_MODE_NORMAL,
+	DPLL_MODE_DEEP,
+
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_MASK		= 3,
+	APLL_MODE_SLOW		= 0,
+	APLL_MODE_NORMAL,
+	APLL_MODE_DEEP,
+};
+
+/* CRU_APLL_CON0 */
+enum {
+	CLKR_SHIFT		= 8,
+	CLKR_MASK		= 0x3f,
+
+	CLKOD_SHIFT		= 0,
+	CLKOD_MASK		= 0x3f,
+};
+
+/* CRU_APLL_CON1 */
+enum {
+	CLKF_SHIFT		= 0,
+	CLKF_MASK		= 0x1fff,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk322x.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk322x.h
new file mode 100644
index 000000000..ee12fa831
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk322x.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ */
+#ifndef _ASM_ARCH_CRU_RK322X_H
+#define _ASM_ARCH_CRU_RK322X_H
+
+#define MHz		1000000
+#define OSC_HZ		(24 * MHz)
+
+#define APLL_HZ		(600 * MHz)
+#define GPLL_HZ		(594 * MHz)
+
+#define CORE_PERI_HZ	150000000
+#define CORE_ACLK_HZ	300000000
+
+#define BUS_ACLK_HZ	148500000
+#define BUS_HCLK_HZ	148500000
+#define BUS_PCLK_HZ	74250000
+
+#define PERI_ACLK_HZ	148500000
+#define PERI_HCLK_HZ	148500000
+#define PERI_PCLK_HZ	74250000
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk322x_clk_priv {
+	struct rk322x_cru *cru;
+	ulong rate;
+};
+
+struct rk322x_cru {
+	struct rk322x_pll {
+		unsigned int con0;
+		unsigned int con1;
+		unsigned int con2;
+	} pll[4];
+	unsigned int reserved0[4];
+	unsigned int cru_mode_con;
+	unsigned int cru_clksel_con[35];
+	unsigned int cru_clkgate_con[16];
+	unsigned int cru_softrst_con[9];
+	unsigned int cru_misc_con;
+	unsigned int reserved1[2];
+	unsigned int cru_glb_cnt_th;
+	unsigned int reserved2[3];
+	unsigned int cru_glb_rst_st;
+	unsigned int reserved3[(0x1c0 - 0x150) / 4 - 1];
+	unsigned int cru_sdmmc_con[2];
+	unsigned int cru_sdio_con[2];
+	unsigned int reserved4[2];
+	unsigned int cru_emmc_con[2];
+	unsigned int reserved5[4];
+	unsigned int cru_glb_srst_fst_value;
+	unsigned int cru_glb_srst_snd_value;
+	unsigned int cru_pll_mask_con;
+};
+check_member(rk322x_cru, cru_pll_mask_con, 0x01f8);
+
+struct pll_div {
+	u32 refdiv;
+	u32 fbdiv;
+	u32 postdiv1;
+	u32 postdiv2;
+	u32 frac;
+};
+
+enum {
+	/* PLLCON0*/
+	PLL_BP_SHIFT		= 15,
+	PLL_POSTDIV1_SHIFT	= 12,
+	PLL_POSTDIV1_MASK	= 7 << PLL_POSTDIV1_SHIFT,
+	PLL_FBDIV_SHIFT		= 0,
+	PLL_FBDIV_MASK		= 0xfff,
+
+	/* PLLCON1 */
+	PLL_RST_SHIFT		= 14,
+	PLL_PD_SHIFT		= 13,
+	PLL_PD_MASK		= 1 << PLL_PD_SHIFT,
+	PLL_DSMPD_SHIFT		= 12,
+	PLL_DSMPD_MASK		= 1 << PLL_DSMPD_SHIFT,
+	PLL_LOCK_STATUS_SHIFT	= 10,
+	PLL_LOCK_STATUS_MASK	= 1 << PLL_LOCK_STATUS_SHIFT,
+	PLL_POSTDIV2_SHIFT	= 6,
+	PLL_POSTDIV2_MASK	= 7 << PLL_POSTDIV2_SHIFT,
+	PLL_REFDIV_SHIFT	= 0,
+	PLL_REFDIV_MASK		= 0x3f,
+
+	/* CRU_MODE */
+	GPLL_MODE_SHIFT		= 12,
+	GPLL_MODE_MASK		= 1 << GPLL_MODE_SHIFT,
+	GPLL_MODE_SLOW		= 0,
+	GPLL_MODE_NORM,
+	CPLL_MODE_SHIFT		= 8,
+	CPLL_MODE_MASK		= 1 << CPLL_MODE_SHIFT,
+	CPLL_MODE_SLOW		= 0,
+	CPLL_MODE_NORM,
+	DPLL_MODE_SHIFT		= 4,
+	DPLL_MODE_MASK		= 1 << DPLL_MODE_SHIFT,
+	DPLL_MODE_SLOW		= 0,
+	DPLL_MODE_NORM,
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_MASK		= 1 << APLL_MODE_SHIFT,
+	APLL_MODE_SLOW		= 0,
+	APLL_MODE_NORM,
+
+	/* CRU_CLK_SEL0_CON */
+	BUS_ACLK_PLL_SEL_SHIFT	= 13,
+	BUS_ACLK_PLL_SEL_MASK	= 3 << BUS_ACLK_PLL_SEL_SHIFT,
+	BUS_ACLK_PLL_SEL_APLL	= 0,
+	BUS_ACLK_PLL_SEL_GPLL,
+	BUS_ACLK_PLL_SEL_HDMIPLL,
+	BUS_ACLK_DIV_SHIFT	= 8,
+	BUS_ACLK_DIV_MASK	= 0x1f << BUS_ACLK_DIV_SHIFT,
+	CORE_CLK_PLL_SEL_SHIFT	= 6,
+	CORE_CLK_PLL_SEL_MASK	= 3 << CORE_CLK_PLL_SEL_SHIFT,
+	CORE_CLK_PLL_SEL_APLL	= 0,
+	CORE_CLK_PLL_SEL_GPLL,
+	CORE_CLK_PLL_SEL_DPLL,
+	CORE_DIV_CON_SHIFT	= 0,
+	CORE_DIV_CON_MASK	= 0x1f << CORE_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL1_CON */
+	BUS_PCLK_DIV_SHIFT	= 12,
+	BUS_PCLK_DIV_MASK	= 7 << BUS_PCLK_DIV_SHIFT,
+	BUS_HCLK_DIV_SHIFT	= 8,
+	BUS_HCLK_DIV_MASK	= 3 << BUS_HCLK_DIV_SHIFT,
+	CORE_ACLK_DIV_SHIFT	= 4,
+	CORE_ACLK_DIV_MASK	= 7 << CORE_ACLK_DIV_SHIFT,
+	CORE_PERI_DIV_SHIFT	= 0,
+	CORE_PERI_DIV_MASK	= 0xf << CORE_PERI_DIV_SHIFT,
+
+	/* CRU_CLKSEL5_CON */
+	GMAC_OUT_PLL_SHIFT	= 15,
+	GMAC_OUT_PLL_MASK	= 1 << GMAC_OUT_PLL_SHIFT,
+	GMAC_OUT_DIV_SHIFT	= 8,
+	GMAC_OUT_DIV_MASK	= 0x1f << GMAC_OUT_DIV_SHIFT,
+	MAC_PLL_SEL_SHIFT	= 7,
+	MAC_PLL_SEL_MASK	= 1 << MAC_PLL_SEL_SHIFT,
+	RMII_EXTCLK_SLE_SHIFT	= 5,
+	RMII_EXTCLK_SEL_MASK	= 1 << RMII_EXTCLK_SLE_SHIFT,
+	RMII_EXTCLK_SEL_INT		= 0,
+	RMII_EXTCLK_SEL_EXT,
+	CLK_MAC_DIV_SHIFT	= 0,
+	CLK_MAC_DIV_MASK	= 0x1f << CLK_MAC_DIV_SHIFT,
+
+	/* CRU_CLKSEL10_CON */
+	PERI_PCLK_DIV_SHIFT	= 12,
+	PERI_PCLK_DIV_MASK	= 7 << PERI_PCLK_DIV_SHIFT,
+	PERI_PLL_SEL_SHIFT	= 10,
+	PERI_PLL_SEL_MASK	= 3 << PERI_PLL_SEL_SHIFT,
+	PERI_PLL_CPLL		= 0,
+	PERI_PLL_GPLL,
+	PERI_PLL_HDMIPLL,
+	PERI_HCLK_DIV_SHIFT	= 8,
+	PERI_HCLK_DIV_MASK	= 3 << PERI_HCLK_DIV_SHIFT,
+	PERI_ACLK_DIV_SHIFT	= 0,
+	PERI_ACLK_DIV_MASK	= 0x1f << PERI_ACLK_DIV_SHIFT,
+
+	/* CRU_CLKSEL11_CON */
+	EMMC_PLL_SHIFT		= 12,
+	EMMC_PLL_MASK		= 3 << EMMC_PLL_SHIFT,
+	EMMC_SEL_CPLL		= 0,
+	EMMC_SEL_GPLL,
+	EMMC_SEL_24M,
+	SDIO_PLL_SHIFT		= 10,
+	SDIO_PLL_MASK		= 3 << SDIO_PLL_SHIFT,
+	SDIO_SEL_CPLL		= 0,
+	SDIO_SEL_GPLL,
+	SDIO_SEL_24M,
+	MMC0_PLL_SHIFT		= 8,
+	MMC0_PLL_MASK		= 3 << MMC0_PLL_SHIFT,
+	MMC0_SEL_CPLL		= 0,
+	MMC0_SEL_GPLL,
+	MMC0_SEL_24M,
+	MMC0_DIV_SHIFT		= 0,
+	MMC0_DIV_MASK		= 0xff << MMC0_DIV_SHIFT,
+
+	/* CRU_CLKSEL12_CON */
+	EMMC_DIV_SHIFT		= 8,
+	EMMC_DIV_MASK		= 0xff << EMMC_DIV_SHIFT,
+	SDIO_DIV_SHIFT		= 0,
+	SDIO_DIV_MASK		= 0xff << SDIO_DIV_SHIFT,
+
+	/* CRU_CLKSEL26_CON */
+	DDR_CLK_PLL_SEL_SHIFT	= 8,
+	DDR_CLK_PLL_SEL_MASK	= 3 << DDR_CLK_PLL_SEL_SHIFT,
+	DDR_CLK_SEL_DPLL	= 0,
+	DDR_CLK_SEL_GPLL,
+	DDR_CLK_SEL_APLL,
+	DDR_DIV_SEL_SHIFT	= 0,
+	DDR_DIV_SEL_MASK	= 3 << DDR_DIV_SEL_SHIFT,
+
+	/* CRU_CLKSEL27_CON */
+	VOP_DCLK_DIV_SHIFT	= 8,
+	VOP_DCLK_DIV_MASK	= 0xff << VOP_DCLK_DIV_SHIFT,
+	VOP_PLL_SEL_SHIFT	= 1,
+	VOP_PLL_SEL_MASK	= 1 << VOP_PLL_SEL_SHIFT,
+
+	/* CRU_CLKSEL29_CON */
+	GMAC_CLK_SRC_SHIFT	= 12,
+	GMAC_CLK_SRC_MASK	= 1 << GMAC_CLK_SRC_SHIFT,
+
+	/* CRU_SOFTRST5_CON */
+	DDRCTRL_PSRST_SHIFT	= 11,
+	DDRCTRL_SRST_SHIFT	= 10,
+	DDRPHY_PSRST_SHIFT	= 9,
+	DDRPHY_SRST_SHIFT	= 8,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
new file mode 100644
index 000000000..412b73e55
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
@@ -0,0 +1,230 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * (C) Copyright 2008-2014 Rockchip Electronics
+ * Peter, Software Engineering, <superpeter.cai@gmail.com>.
+ */
+#ifndef _ASM_ARCH_CRU_RK3288_H
+#define _ASM_ARCH_CRU_RK3288_H
+
+#define OSC_HZ		(24 * 1000 * 1000)
+
+#define APLL_HZ		(1800 * 1000000)
+#define GPLL_HZ		(594 * 1000000)
+#define CPLL_HZ		(384 * 1000000)
+#define NPLL_HZ		(384 * 1000000)
+
+/* The SRAM is clocked off aclk_bus, so we want to max it out for boot speed */
+#define PD_BUS_ACLK_HZ	297000000
+#define PD_BUS_HCLK_HZ	148500000
+#define PD_BUS_PCLK_HZ	74250000
+
+#define PERI_ACLK_HZ	148500000
+#define PERI_HCLK_HZ	148500000
+#define PERI_PCLK_HZ	74250000
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk3288_clk_priv {
+	struct rk3288_grf *grf;
+	struct rockchip_cru *cru;
+	ulong rate;
+};
+
+struct rockchip_cru {
+	struct rk3288_pll {
+		u32 con0;
+		u32 con1;
+		u32 con2;
+		u32 con3;
+	} pll[5];
+	u32 cru_mode_con;
+	u32 reserved0[3];
+	u32 cru_clksel_con[43];
+	u32 reserved1[21];
+	u32 cru_clkgate_con[19];
+	u32 reserved2;
+	u32 cru_glb_srst_fst_value;
+	u32 cru_glb_srst_snd_value;
+	u32 cru_softrst_con[12];
+	u32 cru_misc_con;
+	u32 cru_glb_cnt_th;
+	u32 cru_glb_rst_con;
+	u32 reserved3;
+	u32 glb_rst_st;
+	u32 reserved4;
+	u32 cru_sdmmc_con[2];
+	u32 cru_sdio0_con[2];
+	u32 cru_sdio1_con[2];
+	u32 cru_emmc_con[2];
+};
+check_member(rockchip_cru, cru_emmc_con[1], 0x021c);
+
+/* CRU_CLKSEL11_CON */
+enum {
+	HSICPHY_DIV_SHIFT	= 8,
+	HSICPHY_DIV_MASK	= 0x3f << HSICPHY_DIV_SHIFT,
+
+	MMC0_PLL_SHIFT		= 6,
+	MMC0_PLL_MASK		= 3 << MMC0_PLL_SHIFT,
+	MMC0_PLL_SELECT_CODEC	= 0,
+	MMC0_PLL_SELECT_GENERAL,
+	MMC0_PLL_SELECT_24MHZ,
+
+	MMC0_DIV_SHIFT		= 0,
+	MMC0_DIV_MASK		= 0x3f << MMC0_DIV_SHIFT,
+};
+
+/* CRU_CLKSEL8_CON */
+enum {
+	I2S0_FRAC_DENOM_SHIFT	= 0,
+	I2S0_FRAC_DENOM_MASK	= 0xffff << I2S0_FRAC_DENOM_SHIFT,
+	I2S0_FRAC_NUMER_SHIFT	= 16,
+	I2S0_FRAC_NUMER_MASK	= 0xffffu << I2S0_FRAC_NUMER_SHIFT,
+};
+
+/* CRU_CLKSEL12_CON */
+enum {
+	EMMC_PLL_SHIFT		= 0xe,
+	EMMC_PLL_MASK		= 3 << EMMC_PLL_SHIFT,
+	EMMC_PLL_SELECT_CODEC	= 0,
+	EMMC_PLL_SELECT_GENERAL,
+	EMMC_PLL_SELECT_24MHZ,
+
+	EMMC_DIV_SHIFT		= 8,
+	EMMC_DIV_MASK		= 0x3f << EMMC_DIV_SHIFT,
+
+	SDIO0_PLL_SHIFT		= 6,
+	SDIO0_PLL_MASK		= 3 << SDIO0_PLL_SHIFT,
+	SDIO0_PLL_SELECT_CODEC	= 0,
+	SDIO0_PLL_SELECT_GENERAL,
+	SDIO0_PLL_SELECT_24MHZ,
+
+	SDIO0_DIV_SHIFT		= 0,
+	SDIO0_DIV_MASK		= 0x3f << SDIO0_DIV_SHIFT,
+};
+
+/* CRU_CLKSEL21_CON */
+enum {
+	MAC_DIV_CON_SHIFT	= 0xf,
+	MAC_DIV_CON_MASK	= 0x1f << MAC_DIV_CON_SHIFT,
+
+	RMII_EXTCLK_SHIFT	= 4,
+	RMII_EXTCLK_MASK	= 1 << RMII_EXTCLK_SHIFT,
+	RMII_EXTCLK_SELECT_INT_DIV_CLK = 0,
+	RMII_EXTCLK_SELECT_EXT_CLK = 1,
+
+	EMAC_PLL_SHIFT		= 0,
+	EMAC_PLL_MASK		= 0x3 << EMAC_PLL_SHIFT,
+	EMAC_PLL_SELECT_NEW	= 0x0,
+	EMAC_PLL_SELECT_CODEC	= 0x1,
+	EMAC_PLL_SELECT_GENERAL	= 0x2,
+};
+
+/* CRU_CLKSEL25_CON */
+enum {
+	SPI1_PLL_SHIFT		= 0xf,
+	SPI1_PLL_MASK		= 1 << SPI1_PLL_SHIFT,
+	SPI1_PLL_SELECT_CODEC	= 0,
+	SPI1_PLL_SELECT_GENERAL,
+
+	SPI1_DIV_SHIFT		= 8,
+	SPI1_DIV_MASK		= 0x7f << SPI1_DIV_SHIFT,
+
+	SPI0_PLL_SHIFT		= 7,
+	SPI0_PLL_MASK		= 1 << SPI0_PLL_SHIFT,
+	SPI0_PLL_SELECT_CODEC	= 0,
+	SPI0_PLL_SELECT_GENERAL,
+
+	SPI0_DIV_SHIFT		= 0,
+	SPI0_DIV_MASK		= 0x7f << SPI0_DIV_SHIFT,
+};
+
+/* CRU_CLKSEL37_CON */
+enum {
+	PCLK_CORE_DBG_DIV_SHIFT	= 9,
+	PCLK_CORE_DBG_DIV_MASK	= 0x1f << PCLK_CORE_DBG_DIV_SHIFT,
+
+	ATCLK_CORE_DIV_CON_SHIFT = 4,
+	ATCLK_CORE_DIV_CON_MASK	= 0x1f << ATCLK_CORE_DIV_CON_SHIFT,
+
+	CLK_L2RAM_DIV_SHIFT	= 0,
+	CLK_L2RAM_DIV_MASK	= 7 << CLK_L2RAM_DIV_SHIFT,
+};
+
+/* CRU_CLKSEL39_CON */
+enum {
+	ACLK_HEVC_PLL_SHIFT	= 0xe,
+	ACLK_HEVC_PLL_MASK	= 3 << ACLK_HEVC_PLL_SHIFT,
+	ACLK_HEVC_PLL_SELECT_CODEC = 0,
+	ACLK_HEVC_PLL_SELECT_GENERAL,
+	ACLK_HEVC_PLL_SELECT_NEW,
+
+	ACLK_HEVC_DIV_SHIFT	= 8,
+	ACLK_HEVC_DIV_MASK	= 0x1f << ACLK_HEVC_DIV_SHIFT,
+
+	SPI2_PLL_SHIFT		= 7,
+	SPI2_PLL_MASK		= 1 << SPI2_PLL_SHIFT,
+	SPI2_PLL_SELECT_CODEC	= 0,
+	SPI2_PLL_SELECT_GENERAL,
+
+	SPI2_DIV_SHIFT		= 0,
+	SPI2_DIV_MASK		= 0x7f << SPI2_DIV_SHIFT,
+};
+
+/* CRU_MODE_CON */
+enum {
+	CRU_MODE_MASK		= 3,
+
+	NPLL_MODE_SHIFT		= 0xe,
+	NPLL_MODE_MASK		= CRU_MODE_MASK << NPLL_MODE_SHIFT,
+	NPLL_MODE_SLOW		= 0,
+	NPLL_MODE_NORMAL,
+	NPLL_MODE_DEEP,
+
+	GPLL_MODE_SHIFT		= 0xc,
+	GPLL_MODE_MASK		= CRU_MODE_MASK << GPLL_MODE_SHIFT,
+	GPLL_MODE_SLOW		= 0,
+	GPLL_MODE_NORMAL,
+	GPLL_MODE_DEEP,
+
+	CPLL_MODE_SHIFT		= 8,
+	CPLL_MODE_MASK		= CRU_MODE_MASK << CPLL_MODE_SHIFT,
+	CPLL_MODE_SLOW		= 0,
+	CPLL_MODE_NORMAL,
+	CPLL_MODE_DEEP,
+
+	DPLL_MODE_SHIFT		= 4,
+	DPLL_MODE_MASK		= CRU_MODE_MASK << DPLL_MODE_SHIFT,
+	DPLL_MODE_SLOW		= 0,
+	DPLL_MODE_NORMAL,
+	DPLL_MODE_DEEP,
+
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_MASK		= CRU_MODE_MASK << APLL_MODE_SHIFT,
+	APLL_MODE_SLOW		= 0,
+	APLL_MODE_NORMAL,
+	APLL_MODE_DEEP,
+};
+
+/* CRU_APLL_CON0 */
+enum {
+	CLKR_SHIFT		= 8,
+	CLKR_MASK		= 0x3f << CLKR_SHIFT,
+
+	CLKOD_SHIFT		= 0,
+	CLKOD_MASK		= 0xf << CLKOD_SHIFT,
+};
+
+/* CRU_APLL_CON1 */
+enum {
+	LOCK_SHIFT		= 0x1f,
+	LOCK_MASK		= 1 << LOCK_SHIFT,
+	LOCK_UNLOCK		= 0,
+	LOCK_LOCK,
+
+	CLKF_SHIFT		= 0,
+	CLKF_MASK		= 0x1fff << CLKF_SHIFT,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3328.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3328.h
new file mode 100644
index 000000000..226744d67
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3328.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_CRU_RK3328_H_
+#define __ASM_ARCH_CRU_RK3328_H_
+
+struct rk3328_clk_priv {
+	struct rk3328_cru *cru;
+	ulong rate;
+};
+
+struct rk3328_cru {
+	u32 apll_con[5];
+	u32 reserved1[3];
+	u32 dpll_con[5];
+	u32 reserved2[3];
+	u32 cpll_con[5];
+	u32 reserved3[3];
+	u32 gpll_con[5];
+	u32 reserved4[3];
+	u32 mode_con;
+	u32 misc;
+	u32 reserved5[2];
+	u32 glb_cnt_th;
+	u32 glb_rst_st;
+	u32 glb_srst_snd_value;
+	u32 glb_srst_fst_value;
+	u32 npll_con[5];
+	u32 reserved6[(0x100 - 0xb4) / 4];
+	u32 clksel_con[53];
+	u32 reserved7[(0x200 - 0x1d4) / 4];
+	u32 clkgate_con[29];
+	u32 reserved8[3];
+	u32 ssgtbl[32];
+	u32 softrst_con[12];
+	u32 reserved9[(0x380 - 0x330) / 4];
+	u32 sdmmc_con[2];
+	u32 sdio_con[2];
+	u32 emmc_con[2];
+	u32 sdmmc_ext_con[2];
+};
+check_member(rk3328_cru, sdmmc_ext_con[1], 0x39c);
+#define MHz		1000000
+#define KHz		1000
+#define OSC_HZ		(24 * MHz)
+#define APLL_HZ		(600 * MHz)
+#define GPLL_HZ		(576 * MHz)
+#define CPLL_HZ		(594 * MHz)
+
+#define CLK_CORE_HZ	(600 * MHz)
+#define ACLKM_CORE_HZ	(300 * MHz)
+#define PCLK_DBG_HZ	(300 * MHz)
+
+#define PERIHP_ACLK_HZ	(144000 * KHz)
+#define PERIHP_HCLK_HZ	(72000 * KHz)
+#define PERIHP_PCLK_HZ	(72000 * KHz)
+
+#define PWM_CLOCK_HZ    (74 * MHz)
+
+enum apll_frequencies {
+	APLL_816_MHZ,
+	APLL_600_MHZ,
+};
+
+void rk3328_configure_cpu(struct rk3328_cru *cru,
+			  enum apll_frequencies apll_freq);
+
+#endif	/* __ASM_ARCH_CRU_RK3328_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3368.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3368.h
new file mode 100644
index 000000000..316c67c62
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3368.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+#ifndef _ASM_ARCH_CRU_RK3368_H
+#define _ASM_ARCH_CRU_RK3368_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/* RK3368 clock numbers */
+enum rk3368_pll_id {
+	APLLB,
+	APLLL,
+	DPLL,
+	CPLL,
+	GPLL,
+	NPLL,
+	PLL_COUNT,
+};
+
+struct rk3368_cru {
+	struct rk3368_pll {
+		unsigned int con0;
+		unsigned int con1;
+		unsigned int con2;
+		unsigned int con3;
+	} pll[6];
+	unsigned int reserved[0x28];
+	unsigned int clksel_con[56];
+	unsigned int reserved1[8];
+	unsigned int clkgate_con[25];
+	unsigned int reserved2[7];
+	unsigned int glb_srst_fst_val;
+	unsigned int glb_srst_snd_val;
+	unsigned int reserved3[0x1e];
+	unsigned int softrst_con[15];
+	unsigned int reserved4[0x11];
+	unsigned int misc_con;
+	unsigned int glb_cnt_th;
+	unsigned int glb_rst_con;
+	unsigned int glb_rst_st;
+	unsigned int reserved5[0x1c];
+	unsigned int sdmmc_con[2];
+	unsigned int sdio0_con[2];
+	unsigned int sdio1_con[2];
+	unsigned int emmc_con[2];
+};
+check_member(rk3368_cru, emmc_con[1], 0x41c);
+
+struct rk3368_clk_priv {
+	struct rk3368_cru *cru;
+};
+
+enum {
+	/* PLL CON0 */
+	PLL_NR_SHIFT			= 8,
+	PLL_NR_MASK			= GENMASK(13, 8),
+	PLL_OD_SHIFT			= 0,
+	PLL_OD_MASK			= GENMASK(3, 0),
+
+	/* PLL CON1 */
+	PLL_LOCK_STA			= BIT(31),
+	PLL_NF_SHIFT			= 0,
+	PLL_NF_MASK			= GENMASK(12, 0),
+
+	/* PLL CON2 */
+	PLL_BWADJ_SHIFT			= 0,
+	PLL_BWADJ_MASK			= GENMASK(11, 0),
+
+	/* PLL CON3 */
+	PLL_MODE_SHIFT			= 8,
+	PLL_MODE_MASK			= GENMASK(9, 8),
+	PLL_MODE_SLOW			= 0,
+	PLL_MODE_NORMAL			= 1,
+	PLL_MODE_DEEP_SLOW		= 3,
+	PLL_RESET_SHIFT			= 5,
+	PLL_RESET			= 1,
+	PLL_RESET_MASK			= GENMASK(5, 5),
+
+	/* CLKSEL12_CON */
+	MCU_STCLK_DIV_SHIFT		= 8,
+	MCU_STCLK_DIV_MASK		= GENMASK(10, 8),
+	MCU_PLL_SEL_SHIFT		= 7,
+	MCU_PLL_SEL_MASK		= BIT(7),
+	MCU_PLL_SEL_CPLL		= 0,
+	MCU_PLL_SEL_GPLL		= 1,
+	MCU_CLK_DIV_SHIFT		= 0,
+	MCU_CLK_DIV_MASK		= GENMASK(4, 0),
+
+	/* CLKSEL_CON25 */
+	CLK_SARADC_DIV_CON_SHIFT	= 8,
+	CLK_SARADC_DIV_CON_MASK		= GENMASK(15, 8),
+	CLK_SARADC_DIV_CON_WIDTH	= 8,
+
+	/* CLKSEL43_CON */
+	GMAC_DIV_CON_SHIFT		= 0x0,
+	GMAC_DIV_CON_MASK		= GENMASK(4, 0),
+	GMAC_PLL_SHIFT			= 6,
+	GMAC_PLL_MASK			= GENMASK(7, 6),
+	GMAC_PLL_SELECT_NEW		= (0x0 << GMAC_PLL_SHIFT),
+	GMAC_PLL_SELECT_CODEC		= (0x1 << GMAC_PLL_SHIFT),
+	GMAC_PLL_SELECT_GENERAL		= (0x2 << GMAC_PLL_SHIFT),
+	GMAC_MUX_SEL_EXTCLK             = BIT(8),
+
+	/* CLKSEL51_CON */
+	MMC_PLL_SEL_SHIFT		= 8,
+	MMC_PLL_SEL_MASK		= GENMASK(9, 8),
+	MMC_PLL_SEL_CPLL		= (0 << MMC_PLL_SEL_SHIFT),
+	MMC_PLL_SEL_GPLL                = (1 << MMC_PLL_SEL_SHIFT),
+	MMC_PLL_SEL_USBPHY_480M         = (2 << MMC_PLL_SEL_SHIFT),
+	MMC_PLL_SEL_24M                 = (3 << MMC_PLL_SEL_SHIFT),
+	MMC_CLK_DIV_SHIFT		= 0,
+	MMC_CLK_DIV_MASK		= GENMASK(6, 0),
+
+	/* SOFTRST1_CON */
+	MCU_PO_SRST_MASK		= BIT(13),
+	MCU_SYS_SRST_MASK		= BIT(12),
+	DMA1_SRST_REQ                   = BIT(2),
+
+	/* SOFTRST4_CON */
+	DMA2_SRST_REQ                   = BIT(0),
+
+	/* GLB_RST_CON */
+	PMU_GLB_SRST_CTRL_SHIFT		= 2,
+	PMU_GLB_SRST_CTRL_MASK		= GENMASK(3, 2),
+	PMU_RST_BY_FST_GLB_SRST 	= 0,
+	PMU_RST_BY_SND_GLB_SRST 	= 1,
+	PMU_RST_DISABLE			= 2,
+	WDT_GLB_SRST_CTRL_SHIFT		= 1,
+	WDT_GLB_SRST_CTRL_MASK		= BIT(1),
+	WDT_TRIGGER_SND_GLB_SRST 	= 0,
+	WDT_TRIGGER_FST_GLB_SRST 	= 1,
+	TSADC_GLB_SRST_CTRL_SHIFT 	= 0,
+	TSADC_GLB_SRST_CTRL_MASK  	= BIT(0),
+	TSADC_TRIGGER_SND_GLB_SRST 	= 0,
+	TSADC_TRIGGER_FST_GLB_SRST 	= 1,
+
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3399.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
new file mode 100644
index 000000000..d941a129f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_CRU_RK3399_H_
+#define __ASM_ARCH_CRU_RK3399_H_
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk3399_clk_priv {
+	struct rockchip_cru *cru;
+};
+
+struct rk3399_pmuclk_priv {
+	struct rk3399_pmucru *pmucru;
+};
+
+struct rk3399_pmucru {
+	u32 ppll_con[6];
+	u32 reserved[0x1a];
+	u32 pmucru_clksel[6];
+	u32 pmucru_clkfrac_con[2];
+	u32 reserved2[0x18];
+	u32 pmucru_clkgate_con[3];
+	u32 reserved3;
+	u32 pmucru_softrst_con[2];
+	u32 reserved4[2];
+	u32 pmucru_rstnhold_con[2];
+	u32 reserved5[2];
+	u32 pmucru_gatedis_con[2];
+};
+check_member(rk3399_pmucru, pmucru_gatedis_con[1], 0x134);
+
+struct rockchip_cru {
+	u32 apll_l_con[6];
+	u32 reserved[2];
+	u32 apll_b_con[6];
+	u32 reserved1[2];
+	u32 dpll_con[6];
+	u32 reserved2[2];
+	u32 cpll_con[6];
+	u32 reserved3[2];
+	u32 gpll_con[6];
+	u32 reserved4[2];
+	u32 npll_con[6];
+	u32 reserved5[2];
+	u32 vpll_con[6];
+	u32 reserved6[0x0a];
+	u32 clksel_con[108];
+	u32 reserved7[0x14];
+	u32 clkgate_con[35];
+	u32 reserved8[0x1d];
+	u32 softrst_con[21];
+	u32 reserved9[0x2b];
+	u32 glb_srst_fst_value;
+	u32 glb_srst_snd_value;
+	u32 glb_cnt_th;
+	u32 misc_con;
+	u32 glb_rst_con;
+	u32 glb_rst_st;
+	u32 reserved10[0x1a];
+	u32 sdmmc_con[2];
+	u32 sdio0_con[2];
+	u32 sdio1_con[2];
+};
+check_member(rockchip_cru, sdio1_con[1], 0x594);
+#define KHz		1000
+#define OSC_HZ		(24*MHz)
+#define LPLL_HZ		(600*MHz)
+#define BPLL_HZ		(600*MHz)
+#define GPLL_HZ		(594*MHz)
+#define CPLL_HZ		(384*MHz)
+#define PPLL_HZ		(676*MHz)
+
+#define PMU_PCLK_HZ	(48*MHz)
+
+#define ACLKM_CORE_L_HZ	(300*MHz)
+#define ATCLK_CORE_L_HZ	(300*MHz)
+#define PCLK_DBG_L_HZ	(100*MHz)
+
+#define ACLKM_CORE_B_HZ	(300*MHz)
+#define ATCLK_CORE_B_HZ	(300*MHz)
+#define PCLK_DBG_B_HZ	(100*MHz)
+
+#define PERIHP_ACLK_HZ	(148500*KHz)
+#define PERIHP_HCLK_HZ	(148500*KHz)
+#define PERIHP_PCLK_HZ	(37125*KHz)
+
+#define PERILP0_ACLK_HZ	(99000*KHz)
+#define PERILP0_HCLK_HZ	(99000*KHz)
+#define PERILP0_PCLK_HZ	(49500*KHz)
+
+#define PERILP1_HCLK_HZ	(99000*KHz)
+#define PERILP1_PCLK_HZ	(49500*KHz)
+
+#define PWM_CLOCK_HZ    PMU_PCLK_HZ
+
+enum apll_l_frequencies {
+	APLL_L_1600_MHZ,
+	APLL_L_600_MHZ,
+};
+
+enum apll_b_frequencies {
+	APLL_B_600_MHZ,
+};
+
+void rk3399_configure_cpu_l(struct rockchip_cru *cru,
+			    enum apll_l_frequencies apll_l_freq);
+void rk3399_configure_cpu_b(struct rockchip_cru *cru,
+			    enum apll_b_frequencies apll_b_freq);
+
+#endif	/* __ASM_ARCH_CRU_RK3399_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rv1108.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rv1108.h
new file mode 100644
index 000000000..0ba5ff6a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/cru_rv1108.h
@@ -0,0 +1,260 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+#ifndef _ASM_ARCH_CRU_RV1108_H
+#define _ASM_ARCH_CRU_RV1108_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define OSC_HZ		(24 * 1000 * 1000)
+
+#define APLL_HZ		(600 * 1000000)
+#define GPLL_HZ		(1188 * 1000000)
+#define ACLK_PERI_HZ	(148500000)
+#define HCLK_PERI_HZ	(148500000)
+#define PCLK_PERI_HZ	(74250000)
+#define ACLK_BUS_HZ	(148500000)
+
+struct rv1108_clk_priv {
+	struct rv1108_cru *cru;
+	ulong rate;
+};
+
+struct rv1108_cru {
+	struct rv1108_pll {
+		unsigned int con0;
+		unsigned int con1;
+		unsigned int con2;
+		unsigned int con3;
+		unsigned int con4;
+		unsigned int con5;
+		unsigned int reserved[2];
+	} pll[3];
+	unsigned int clksel_con[46];
+	unsigned int reserved1[2];
+	unsigned int clkgate_con[20];
+	unsigned int reserved2[4];
+	unsigned int softrst_con[13];
+	unsigned int reserved3[3];
+	unsigned int glb_srst_fst_val;
+	unsigned int glb_srst_snd_val;
+	unsigned int glb_cnt_th;
+	unsigned int misc_con;
+	unsigned int glb_rst_con;
+	unsigned int glb_rst_st;
+	unsigned int sdmmc_con[2];
+	unsigned int sdio_con[2];
+	unsigned int emmc_con[2];
+};
+check_member(rv1108_cru, emmc_con[1], 0x01ec);
+
+struct pll_div {
+	u32 refdiv;
+	u32 fbdiv;
+	u32 postdiv1;
+	u32 postdiv2;
+	u32 frac;
+};
+
+enum {
+	/* PLL CON0 */
+	FBDIV_MASK		= 0xfff,
+	FBDIV_SHIFT		= 0,
+
+	/* PLL CON1 */
+	POSTDIV2_SHIFT          = 12,
+	POSTDIV2_MASK		= 7 << POSTDIV2_SHIFT,
+	POSTDIV1_SHIFT          = 8,
+	POSTDIV1_MASK		= 7 << POSTDIV1_SHIFT,
+	REFDIV_MASK		= 0x3f,
+	REFDIV_SHIFT		= 0,
+
+	/* PLL CON2 */
+	LOCK_STA_SHIFT          = 31,
+	LOCK_STA_MASK		= 1 << LOCK_STA_SHIFT,
+	FRACDIV_MASK		= 0xffffff,
+	FRACDIV_SHIFT		= 0,
+
+	/* PLL CON3 */
+	WORK_MODE_SHIFT         = 8,
+	WORK_MODE_MASK		= 1 << WORK_MODE_SHIFT,
+	WORK_MODE_SLOW		= 0,
+	WORK_MODE_NORMAL	= 1,
+	DSMPD_SHIFT             = 3,
+	DSMPD_MASK		= 1 << DSMPD_SHIFT,
+	INTEGER_MODE			= 1,
+	GLOBAL_POWER_DOWN_SHIFT		= 0,
+	GLOBAL_POWER_DOWN_MASK		= 1 << GLOBAL_POWER_DOWN_SHIFT,
+	GLOBAL_POWER_DOWN		= 1,
+	GLOBAL_POWER_UP			= 0,
+
+	/* CLKSEL0_CON */
+	CORE_PLL_SEL_SHIFT	= 8,
+	CORE_PLL_SEL_MASK	= 3 << CORE_PLL_SEL_SHIFT,
+	CORE_PLL_SEL_APLL	= 0,
+	CORE_PLL_SEL_GPLL	= 1,
+	CORE_PLL_SEL_DPLL	= 2,
+	CORE_CLK_DIV_SHIFT	= 0,
+	CORE_CLK_DIV_MASK	= 0x1f << CORE_CLK_DIV_SHIFT,
+
+	/* CLKSEL_CON1 */
+	PCLK_DBG_DIV_CON_SHIFT		= 4,
+	PCLK_DBG_DIV_CON_MASK		= 0xf << PCLK_DBG_DIV_CON_SHIFT,
+	ACLK_CORE_DIV_CON_SHIFT		= 0,
+	ACLK_CORE_DIV_CON_MASK		= 7 << ACLK_CORE_DIV_CON_SHIFT,
+
+	/* CLKSEL_CON2 */
+	ACLK_BUS_PLL_SEL_SHIFT		= 8,
+	ACLK_BUS_PLL_SEL_MASK		= 3 << ACLK_BUS_PLL_SEL_SHIFT,
+	ACLK_BUS_PLL_SEL_GPLL		= 0,
+	ACLK_BUS_PLL_SEL_APLL		= 1,
+	ACLK_BUS_PLL_SEL_DPLL		= 2,
+	ACLK_BUS_DIV_CON_SHIFT		= 0,
+	ACLK_BUS_DIV_CON_MASK		= 0x1f << ACLK_BUS_DIV_CON_SHIFT,
+	ACLK_BUS_DIV_CON_WIDTH		= 5,
+
+	/* CLKSEL_CON3 */
+	PCLK_BUS_DIV_CON_SHIFT		= 8,
+	PCLK_BUS_DIV_CON_MASK		= 0x1f << PCLK_BUS_DIV_CON_SHIFT,
+	HCLK_BUS_DIV_CON_SHIFT		= 0,
+	HCLK_BUS_DIV_CON_MASK		= 0x1f,
+
+	/* CLKSEL_CON4 */
+	CLK_DDR_PLL_SEL_SHIFT		= 8,
+	CLK_DDR_PLL_SEL_MASK		= 0x3 << CLK_DDR_PLL_SEL_SHIFT,
+	CLK_DDR_DIV_CON_SHIFT		= 0,
+	CLK_DDR_DIV_CON_MASK		= 0x3 << CLK_DDR_DIV_CON_SHIFT,
+
+	/* CLKSEL_CON19 */
+	CLK_I2C1_PLL_SEL_SHIFT		= 15,
+	CLK_I2C1_PLL_SEL_MASK		= 1 << CLK_I2C1_PLL_SEL_SHIFT,
+	CLK_I2C1_PLL_SEL_DPLL		= 0,
+	CLK_I2C1_PLL_SEL_GPLL		= 1,
+	CLK_I2C1_DIV_CON_SHIFT		= 8,
+	CLK_I2C1_DIV_CON_MASK		= 0x7f << CLK_I2C1_DIV_CON_SHIFT,
+	CLK_I2C0_PLL_SEL_SHIFT		= 7,
+	CLK_I2C0_PLL_SEL_MASK		= 1 << CLK_I2C0_PLL_SEL_SHIFT,
+	CLK_I2C0_DIV_CON_SHIFT		= 0,
+	CLK_I2C0_DIV_CON_MASK		= 0x7f,
+	I2C_DIV_CON_WIDTH		= 7,
+
+	/* CLKSEL_CON20 */
+	CLK_I2C3_PLL_SEL_SHIFT		= 15,
+	CLK_I2C3_PLL_SEL_MASK		= 1 << CLK_I2C3_PLL_SEL_SHIFT,
+	CLK_I2C3_PLL_SEL_DPLL		= 0,
+	CLK_I2C3_PLL_SEL_GPLL		= 1,
+	CLK_I2C3_DIV_CON_SHIFT		= 8,
+	CLK_I2C3_DIV_CON_MASK		= 0x7f << CLK_I2C3_DIV_CON_SHIFT,
+	CLK_I2C2_PLL_SEL_SHIFT		= 7,
+	CLK_I2C2_PLL_SEL_MASK		= 1 << CLK_I2C2_PLL_SEL_SHIFT,
+	CLK_I2C2_DIV_CON_SHIFT		= 0,
+	CLK_I2C2_DIV_CON_MASK		= 0x7f,
+
+	/* CLKSEL_CON22 */
+	CLK_SARADC_DIV_CON_SHIFT= 0,
+	CLK_SARADC_DIV_CON_MASK	= GENMASK(9, 0),
+	CLK_SARADC_DIV_CON_WIDTH= 10,
+
+	/* CLKSEL_CON23 */
+	ACLK_PERI_PLL_SEL_SHIFT		= 15,
+	ACLK_PERI_PLL_SEL_MASK		= 1 << ACLK_PERI_PLL_SEL_SHIFT,
+	ACLK_PERI_PLL_SEL_GPLL		= 0,
+	ACLK_PERI_PLL_SEL_DPLL		= 1,
+	PCLK_PERI_DIV_CON_SHIFT		= 10,
+	PCLK_PERI_DIV_CON_MASK		= 0x1f << PCLK_PERI_DIV_CON_SHIFT,
+	HCLK_PERI_DIV_CON_SHIFT		= 5,
+	HCLK_PERI_DIV_CON_MASK		= 0x1f << HCLK_PERI_DIV_CON_SHIFT,
+	ACLK_PERI_DIV_CON_SHIFT		= 0,
+	ACLK_PERI_DIV_CON_MASK		= 0x1f,
+	PERI_DIV_CON_WIDTH		= 5,
+
+	/* CLKSEL24_CON */
+	MAC_PLL_SEL_SHIFT	= 12,
+	MAC_PLL_SEL_MASK	= 1 << MAC_PLL_SEL_SHIFT,
+	MAC_PLL_SEL_APLL	= 0,
+	MAC_PLL_SEL_GPLL	= 1,
+	RMII_EXTCLK_SEL_SHIFT   = 8,
+	RMII_EXTCLK_SEL_MASK	= 1 << RMII_EXTCLK_SEL_SHIFT,
+	MAC_CLK_DIV_MASK	= 0x1f,
+	MAC_CLK_DIV_SHIFT	= 0,
+
+	/* CLKSEL25_CON */
+	EMMC_PLL_SEL_SHIFT	= 12,
+	EMMC_PLL_SEL_MASK	= 3 << EMMC_PLL_SEL_SHIFT,
+	EMMC_PLL_SEL_DPLL	= 0,
+	EMMC_PLL_SEL_GPLL,
+	EMMC_PLL_SEL_OSC,
+
+	/* CLKSEL26_CON */
+	EMMC_CLK_DIV_SHIFT	= 8,
+	EMMC_CLK_DIV_MASK	= 0xff << EMMC_CLK_DIV_SHIFT,
+
+	/* CLKSEL27_CON */
+	SFC_PLL_SEL_SHIFT	= 7,
+	SFC_PLL_SEL_MASK	= 1 << SFC_PLL_SEL_SHIFT,
+	SFC_PLL_SEL_DPLL	= 0,
+	SFC_PLL_SEL_GPLL	= 1,
+	SFC_CLK_DIV_SHIFT	= 0,
+	SFC_CLK_DIV_MASK	= 0x3f << SFC_CLK_DIV_SHIFT,
+
+	/* CLKSEL28_CON */
+	ACLK_VIO1_PLL_SEL_SHIFT		= 14,
+	ACLK_VIO1_PLL_SEL_MASK		= 3 << ACLK_VIO1_PLL_SEL_SHIFT,
+	VIO_PLL_SEL_DPLL		= 0,
+	VIO_PLL_SEL_GPLL		= 1,
+	ACLK_VIO1_CLK_DIV_SHIFT		= 8,
+	ACLK_VIO1_CLK_DIV_MASK		= 0x1f << ACLK_VIO1_CLK_DIV_SHIFT,
+	CLK_VIO_DIV_CON_WIDTH		= 5,
+	ACLK_VIO0_PLL_SEL_SHIFT		= 6,
+	ACLK_VIO0_PLL_SEL_MASK		= 3 << ACLK_VIO0_PLL_SEL_SHIFT,
+	ACLK_VIO0_CLK_DIV_SHIFT		= 0,
+	ACLK_VIO0_CLK_DIV_MASK		= 0x1f << ACLK_VIO0_CLK_DIV_SHIFT,
+
+	/* CLKSEL29_CON */
+	PCLK_VIO_CLK_DIV_SHIFT		= 8,
+	PCLK_VIO_CLK_DIV_MASK		= 0x1f << PCLK_VIO_CLK_DIV_SHIFT,
+	HCLK_VIO_CLK_DIV_SHIFT		= 0,
+	HCLK_VIO_CLK_DIV_MASK		= 0x1f << HCLK_VIO_CLK_DIV_SHIFT,
+
+	/* CLKSEL32_CON */
+	DCLK_VOP_SEL_SHIFT		= 7,
+	DCLK_VOP_SEL_MASK		= 1 << DCLK_VOP_SEL_SHIFT,
+	DCLK_VOP_SEL_HDMI		= 0,
+	DCLK_VOP_SEL_PLL		= 1,
+	DCLK_VOP_PLL_SEL_SHIFT		= 6,
+	DCLK_VOP_PLL_SEL_MASK		= 1 << DCLK_VOP_PLL_SEL_SHIFT,
+	DCLK_VOP_PLL_SEL_GPLL		= 0,
+	DCLK_VOP_PLL_SEL_DPLL		= 1,
+	DCLK_VOP_CLK_DIV_SHIFT		= 0,
+	DCLK_VOP_CLK_DIV_MASK		= 0x3f << DCLK_VOP_CLK_DIV_SHIFT,
+	DCLK_VOP_DIV_CON_WIDTH		= 6,
+
+	/* SOFTRST1_CON*/
+	DDRPHY_SRSTN_CLKDIV_REQ_SHIFT	= 0,
+	DDRPHY_SRSTN_CLKDIV_REQ		= 1,
+	DDRPHY_SRSTN_CLKDIV_DIS		= 0,
+	DDRPHY_SRSTN_CLKDIV_REQ_MASK	= 1 << DDRPHY_SRSTN_CLKDIV_REQ_SHIFT,
+	DDRPHY_SRSTN_REQ_SHIFT		= 1,
+	DDRPHY_SRSTN_REQ		= 1,
+	DDRPHY_SRSTN_DIS		= 0,
+	DDRPHY_SRSTN_REQ_MASK		= 1 << DDRPHY_SRSTN_REQ_SHIFT,
+	DDRPHY_PSRSTN_REQ_SHIFT		= 2,
+	DDRPHY_PSRSTN_REQ		= 1,
+	DDRPHY_PSRSTN_DIS		= 0,
+	DDRPHY_PSRSTN_REQ_MASK		= 1 << DDRPHY_PSRSTN_REQ_SHIFT,
+
+	/* SOFTRST2_CON*/
+	DDRUPCTL_PSRSTN_REQ_SHIFT	= 0,
+	DDRUPCTL_PSRSTN_REQ		= 1,
+	DDRUPCTL_PSRSTN_DIS		= 0,
+	DDRUPCTL_PSRSTN_REQ_MASK	= 1 << DDRUPCTL_PSRSTN_REQ_SHIFT,
+	DDRUPCTL_NSRSTN_REQ_SHIFT	= 1,
+	DDRUPCTL_NSRSTN_REQ		= 1,
+	DDRUPCTL_NSRSTN_DIS		= 0,
+	DDRUPCTL_NSRSTN_REQ_MASK	= 1 << DDRUPCTL_NSRSTN_REQ_SHIFT,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3188.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3188.h
new file mode 100644
index 000000000..db83d0e7d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3188.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2015 Google, Inc
+ */
+
+#ifndef _ASM_ARCH_DDR_RK3188_H
+#define _ASM_ARCH_DDR_RK3188_H
+
+#include <asm/arch-rockchip/ddr_rk3288.h>
+
+/*
+ * RK3188 Memory scheduler register map.
+ */
+struct rk3188_msch {
+	u32 coreid;
+	u32 revisionid;
+	u32 ddrconf;
+	u32 ddrtiming;
+	u32 ddrmode;
+	u32 readlatency;
+};
+check_member(rk3188_msch, readlatency, 0x0014);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3288.h
new file mode 100644
index 000000000..979d5470e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3288.h
@@ -0,0 +1,443 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2015 Google, Inc
+ */
+
+#ifndef _ASM_ARCH_DDR_RK3288_H
+#define _ASM_ARCH_DDR_RK3288_H
+
+struct rk3288_ddr_pctl {
+	u32 scfg;
+	u32 sctl;
+	u32 stat;
+	u32 intrstat;
+	u32 reserved0[12];
+	u32 mcmd;
+	u32 powctl;
+	u32 powstat;
+	u32 cmdtstat;
+	u32 tstaten;
+	u32 reserved1[3];
+	u32 mrrcfg0;
+	u32 mrrstat0;
+	u32 mrrstat1;
+	u32 reserved2[4];
+	u32 mcfg1;
+	u32 mcfg;
+	u32 ppcfg;
+	u32 mstat;
+	u32 lpddr2zqcfg;
+	u32 reserved3;
+	u32 dtupdes;
+	u32 dtuna;
+	u32 dtune;
+	u32 dtuprd0;
+	u32 dtuprd1;
+	u32 dtuprd2;
+	u32 dtuprd3;
+	u32 dtuawdt;
+	u32 reserved4[3];
+	u32 togcnt1u;
+	u32 tinit;
+	u32 trsth;
+	u32 togcnt100n;
+	u32 trefi;
+	u32 tmrd;
+	u32 trfc;
+	u32 trp;
+	u32 trtw;
+	u32 tal;
+	u32 tcl;
+	u32 tcwl;
+	u32 tras;
+	u32 trc;
+	u32 trcd;
+	u32 trrd;
+	u32 trtp;
+	u32 twr;
+	u32 twtr;
+	u32 texsr;
+	u32 txp;
+	u32 txpdll;
+	u32 tzqcs;
+	u32 tzqcsi;
+	u32 tdqs;
+	u32 tcksre;
+	u32 tcksrx;
+	u32 tcke;
+	u32 tmod;
+	u32 trstl;
+	u32 tzqcl;
+	u32 tmrr;
+	u32 tckesr;
+	u32 tdpd;
+	u32 reserved5[14];
+	u32 ecccfg;
+	u32 ecctst;
+	u32 eccclr;
+	u32 ecclog;
+	u32 reserved6[28];
+	u32 dtuwactl;
+	u32 dturactl;
+	u32 dtucfg;
+	u32 dtuectl;
+	u32 dtuwd0;
+	u32 dtuwd1;
+	u32 dtuwd2;
+	u32 dtuwd3;
+	u32 dtuwdm;
+	u32 dturd0;
+	u32 dturd1;
+	u32 dturd2;
+	u32 dturd3;
+	u32 dtulfsrwd;
+	u32 dtulfsrrd;
+	u32 dtueaf;
+	u32 dfitctrldelay;
+	u32 dfiodtcfg;
+	u32 dfiodtcfg1;
+	u32 dfiodtrankmap;
+	u32 dfitphywrdata;
+	u32 dfitphywrlat;
+	u32 reserved7[2];
+	u32 dfitrddataen;
+	u32 dfitphyrdlat;
+	u32 reserved8[2];
+	u32 dfitphyupdtype0;
+	u32 dfitphyupdtype1;
+	u32 dfitphyupdtype2;
+	u32 dfitphyupdtype3;
+	u32 dfitctrlupdmin;
+	u32 dfitctrlupdmax;
+	u32 dfitctrlupddly;
+	u32 reserved9;
+	u32 dfiupdcfg;
+	u32 dfitrefmski;
+	u32 dfitctrlupdi;
+	u32 reserved10[4];
+	u32 dfitrcfg0;
+	u32 dfitrstat0;
+	u32 dfitrwrlvlen;
+	u32 dfitrrdlvlen;
+	u32 dfitrrdlvlgateen;
+	u32 dfiststat0;
+	u32 dfistcfg0;
+	u32 dfistcfg1;
+	u32 reserved11;
+	u32 dfitdramclken;
+	u32 dfitdramclkdis;
+	u32 dfistcfg2;
+	u32 dfistparclr;
+	u32 dfistparlog;
+	u32 reserved12[3];
+	u32 dfilpcfg0;
+	u32 reserved13[3];
+	u32 dfitrwrlvlresp0;
+	u32 dfitrwrlvlresp1;
+	u32 dfitrwrlvlresp2;
+	u32 dfitrrdlvlresp0;
+	u32 dfitrrdlvlresp1;
+	u32 dfitrrdlvlresp2;
+	u32 dfitrwrlvldelay0;
+	u32 dfitrwrlvldelay1;
+	u32 dfitrwrlvldelay2;
+	u32 dfitrrdlvldelay0;
+	u32 dfitrrdlvldelay1;
+	u32 dfitrrdlvldelay2;
+	u32 dfitrrdlvlgatedelay0;
+	u32 dfitrrdlvlgatedelay1;
+	u32 dfitrrdlvlgatedelay2;
+	u32 dfitrcmd;
+	u32 reserved14[46];
+	u32 ipvr;
+	u32 iptr;
+};
+check_member(rk3288_ddr_pctl, iptr, 0x03fc);
+
+struct rk3288_ddr_publ_datx {
+	u32 dxgcr;
+	u32 dxgsr[2];
+	u32 dxdllcr;
+	u32 dxdqtr;
+	u32 dxdqstr;
+	u32 reserved[10];
+};
+
+struct rk3288_ddr_publ {
+	u32 ridr;
+	u32 pir;
+	u32 pgcr;
+	u32 pgsr;
+	u32 dllgcr;
+	u32 acdllcr;
+	u32 ptr[3];
+	u32 aciocr;
+	u32 dxccr;
+	u32 dsgcr;
+	u32 dcr;
+	u32 dtpr[3];
+	u32 mr[4];
+	u32 odtcr;
+	u32 dtar;
+	u32 dtdr[2];
+	u32 reserved1[24];
+	u32 dcuar;
+	u32 dcudr;
+	u32 dcurr;
+	u32 dculr;
+	u32 dcugcr;
+	u32 dcutpr;
+	u32 dcusr[2];
+	u32 reserved2[8];
+	u32 bist[17];
+	u32 reserved3[15];
+	u32 zq0cr[2];
+	u32 zq0sr[2];
+	u32 zq1cr[2];
+	u32 zq1sr[2];
+	u32 zq2cr[2];
+	u32 zq2sr[2];
+	u32 zq3cr[2];
+	u32 zq3sr[2];
+	struct rk3288_ddr_publ_datx datx8[4];
+};
+check_member(rk3288_ddr_publ, datx8[3].dxdqstr, 0x0294);
+
+struct rk3288_msch {
+	u32 coreid;
+	u32 revisionid;
+	u32 ddrconf;
+	u32 ddrtiming;
+	u32 ddrmode;
+	u32 readlatency;
+	u32 reserved1[8];
+	u32 activate;
+	u32 devtodev;
+};
+check_member(rk3288_msch, devtodev, 0x003c);
+
+/* PCT_DFISTCFG0 */
+#define DFI_INIT_START			(1 << 0)
+
+/* PCT_DFISTCFG1 */
+#define DFI_DRAM_CLK_SR_EN		(1 << 0)
+#define DFI_DRAM_CLK_DPD_EN		(1 << 1)
+
+/* PCT_DFISTCFG2 */
+#define DFI_PARITY_INTR_EN		(1 << 0)
+#define DFI_PARITY_EN			(1 << 1)
+
+/* PCT_DFILPCFG0 */
+#define TLP_RESP_TIME_SHIFT		16
+#define LP_SR_EN			(1 << 8)
+#define LP_PD_EN			(1 << 0)
+
+/* PCT_DFITCTRLDELAY */
+#define TCTRL_DELAY_TIME_SHIFT		0
+
+/* PCT_DFITPHYWRDATA */
+#define TPHY_WRDATA_TIME_SHIFT		0
+
+/* PCT_DFITPHYRDLAT */
+#define TPHY_RDLAT_TIME_SHIFT		0
+
+/* PCT_DFITDRAMCLKDIS */
+#define TDRAM_CLK_DIS_TIME_SHIFT	0
+
+/* PCT_DFITDRAMCLKEN */
+#define TDRAM_CLK_EN_TIME_SHIFT		0
+
+/* PCTL_DFIODTCFG */
+#define RANK0_ODT_WRITE_SEL		(1 << 3)
+#define RANK1_ODT_WRITE_SEL		(1 << 11)
+
+/* PCTL_DFIODTCFG1 */
+#define ODT_LEN_BL8_W_SHIFT		16
+
+/* PUBL_ACDLLCR */
+#define ACDLLCR_DLLDIS			(1 << 31)
+#define ACDLLCR_DLLSRST			(1 << 30)
+
+/* PUBL_DXDLLCR */
+#define DXDLLCR_DLLDIS			(1 << 31)
+#define DXDLLCR_DLLSRST			(1 << 30)
+
+/* PUBL_DLLGCR */
+#define DLLGCR_SBIAS			(1 << 30)
+
+/* PUBL_DXGCR */
+#define DQSRTT				(1 << 9)
+#define DQRTT				(1 << 10)
+
+/* PIR */
+#define PIR_INIT			(1 << 0)
+#define PIR_DLLSRST			(1 << 1)
+#define PIR_DLLLOCK			(1 << 2)
+#define PIR_ZCAL			(1 << 3)
+#define PIR_ITMSRST			(1 << 4)
+#define PIR_DRAMRST			(1 << 5)
+#define PIR_DRAMINIT			(1 << 6)
+#define PIR_QSTRN			(1 << 7)
+#define PIR_RVTRN			(1 << 8)
+#define PIR_ICPC			(1 << 16)
+#define PIR_DLLBYP			(1 << 17)
+#define PIR_CTLDINIT			(1 << 18)
+#define PIR_CLRSR			(1 << 28)
+#define PIR_LOCKBYP			(1 << 29)
+#define PIR_ZCALBYP			(1 << 30)
+#define PIR_INITBYP			(1u << 31)
+
+/* PGCR */
+#define PGCR_DFTLMT_SHIFT		3
+#define PGCR_DFTCMP_SHIFT		2
+#define PGCR_DQSCFG_SHIFT		1
+#define PGCR_ITMDMD_SHIFT		0
+
+/* PGSR */
+#define PGSR_IDONE			(1 << 0)
+#define PGSR_DLDONE			(1 << 1)
+#define PGSR_ZCDONE			(1 << 2)
+#define PGSR_DIDONE			(1 << 3)
+#define PGSR_DTDONE			(1 << 4)
+#define PGSR_DTERR			(1 << 5)
+#define PGSR_DTIERR			(1 << 6)
+#define PGSR_DFTERR			(1 << 7)
+#define PGSR_RVERR			(1 << 8)
+#define PGSR_RVEIRR			(1 << 9)
+
+/* PTR0 */
+#define PRT_ITMSRST_SHIFT		18
+#define PRT_DLLLOCK_SHIFT		6
+#define PRT_DLLSRST_SHIFT		0
+
+/* PTR1 */
+#define PRT_DINIT0_SHIFT		0
+#define PRT_DINIT1_SHIFT		19
+
+/* PTR2 */
+#define PRT_DINIT2_SHIFT		0
+#define PRT_DINIT3_SHIFT		17
+
+/* DCR */
+#define DDRMD_LPDDR			0
+#define DDRMD_DDR			1
+#define DDRMD_DDR2			2
+#define DDRMD_DDR3			3
+#define DDRMD_LPDDR2_LPDDR3		4
+#define DDRMD_MASK			7
+#define DDRMD_SHIFT			0
+#define PDQ_MASK			7
+#define PDQ_SHIFT			4
+
+/* DXCCR */
+#define DQSNRES_MASK			0xf
+#define DQSNRES_SHIFT			8
+#define DQSRES_MASK			0xf
+#define DQSRES_SHIFT			4
+
+/* DTPR */
+#define TDQSCKMAX_SHIFT			27
+#define TDQSCKMAX_MASK			7
+#define TDQSCK_SHIFT			24
+#define TDQSCK_MASK			7
+
+/* DSGCR */
+#define DQSGX_SHIFT			5
+#define DQSGX_MASK			7
+#define DQSGE_SHIFT			8
+#define DQSGE_MASK			7
+
+/* SCTL */
+#define INIT_STATE			0
+#define CFG_STATE			1
+#define GO_STATE			2
+#define SLEEP_STATE			3
+#define WAKEUP_STATE			4
+
+/* STAT */
+#define LP_TRIG_SHIFT			4
+#define LP_TRIG_MASK			7
+#define PCTL_STAT_MSK			7
+#define INIT_MEM			0
+#define CONFIG				1
+#define CONFIG_REQ			2
+#define ACCESS				3
+#define ACCESS_REQ			4
+#define LOW_POWER			5
+#define LOW_POWER_ENTRY_REQ		6
+#define LOW_POWER_EXIT_REQ		7
+
+/* ZQCR*/
+#define PD_OUTPUT_SHIFT			0
+#define PU_OUTPUT_SHIFT			5
+#define PD_ONDIE_SHIFT			10
+#define PU_ONDIE_SHIFT			15
+#define ZDEN_SHIFT			28
+
+/* DDLGCR */
+#define SBIAS_BYPASS			(1 << 23)
+
+/* MCFG */
+#define MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT	24
+#define PD_IDLE_SHIFT			8
+#define MDDR_EN				(2 << 22)
+#define LPDDR2_EN			(3 << 22)
+#define DDR2_EN				(0 << 5)
+#define DDR3_EN				(1 << 5)
+#define LPDDR2_S2			(0 << 6)
+#define LPDDR2_S4			(1 << 6)
+#define MDDR_LPDDR2_BL_2		(0 << 20)
+#define MDDR_LPDDR2_BL_4		(1 << 20)
+#define MDDR_LPDDR2_BL_8		(2 << 20)
+#define MDDR_LPDDR2_BL_16		(3 << 20)
+#define DDR2_DDR3_BL_4			0
+#define DDR2_DDR3_BL_8			1
+#define TFAW_SHIFT			18
+#define PD_EXIT_SLOW			(0 << 17)
+#define PD_EXIT_FAST			(1 << 17)
+#define PD_TYPE_SHIFT			16
+#define BURSTLENGTH_SHIFT		20
+
+/* POWCTL */
+#define POWER_UP_START			(1 << 0)
+
+/* POWSTAT */
+#define POWER_UP_DONE			(1 << 0)
+
+/* MCMD */
+enum {
+	DESELECT_CMD			= 0,
+	PREA_CMD,
+	REF_CMD,
+	MRS_CMD,
+	ZQCS_CMD,
+	ZQCL_CMD,
+	RSTL_CMD,
+	MRR_CMD				= 8,
+	DPDE_CMD,
+};
+
+#define LPDDR2_MA_SHIFT			4
+#define LPDDR2_MA_MASK			0xff
+#define LPDDR2_OP_SHIFT			12
+#define LPDDR2_OP_MASK			0xff
+
+#define START_CMD			(1u << 31)
+
+/*
+ * DDRCONF
+ * [5:4] row(13+n)
+ * [1:0] col(9+n), assume bw=2
+ */
+#define DDRCONF_ROW_SHIFT		4
+#define DDRCONF_COL_SHIFT		0
+
+/* DEVTODEV */
+#define BUSWRTORD_SHIFT			4
+#define BUSRDTOWR_SHIFT			2
+#define BUSRDTORD_SHIFT			0
+
+/* mr1 for ddr3 */
+#define DDR3_DLL_DISABLE		1
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h
new file mode 100644
index 000000000..40cdcf4a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#ifndef __ASM_ARCH_DDR_RK3368_H__
+#define __ASM_ARCH_DDR_RK3368_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/*
+ * The RK3368 DDR PCTL differs from the incarnation in the RK3288 only
+ * in a few details. Most notably, it has an additional field to track
+ * tREFI in controller cycles (i.e. trefi_mem_ddr3).
+ */
+struct rk3368_ddr_pctl {
+	u32 scfg;
+	u32 sctl;
+	u32 stat;
+	u32 intrstat;
+	u32 reserved0[12];
+	u32 mcmd;
+	u32 powctl;
+	u32 powstat;
+	u32 cmdtstat;
+	u32 cmdtstaten;
+	u32 reserved1[3];
+	u32 mrrcfg0;
+	u32 mrrstat0;
+	u32 mrrstat1;
+	u32 reserved2[4];
+	u32 mcfg1;
+	u32 mcfg;
+	u32 ppcfg;
+	u32 mstat;
+	u32 lpddr2zqcfg;
+	u32 reserved3;
+	u32 dtupdes;
+	u32 dtuna;
+	u32 dtune;
+	u32 dtuprd0;
+	u32 dtuprd1;
+	u32 dtuprd2;
+	u32 dtuprd3;
+	u32 dtuawdt;
+	u32 reserved4[3];
+	u32 togcnt1u;
+	u32 tinit;
+	u32 trsth;
+	u32 togcnt100n;
+	u32 trefi;
+	u32 tmrd;
+	u32 trfc;
+	u32 trp;
+	u32 trtw;
+	u32 tal;
+	u32 tcl;
+	u32 tcwl;
+	u32 tras;
+	u32 trc;
+	u32 trcd;
+	u32 trrd;
+	u32 trtp;
+	u32 twr;
+	u32 twtr;
+	u32 texsr;
+	u32 txp;
+	u32 txpdll;
+	u32 tzqcs;
+	u32 tzqcsi;
+	u32 tdqs;
+	u32 tcksre;
+	u32 tcksrx;
+	u32 tcke;
+	u32 tmod;
+	u32 trstl;
+	u32 tzqcl;
+	u32 tmrr;
+	u32 tckesr;
+	u32 tdpd;
+	u32 trefi_mem_ddr3;
+	u32 reserved5[45];
+	u32 dtuwactl;
+	u32 dturactl;
+	u32 dtucfg;
+	u32 dtuectl;
+	u32 dtuwd0;
+	u32 dtuwd1;
+	u32 dtuwd2;
+	u32 dtuwd3;
+	u32 dtuwdm;
+	u32 dturd0;
+	u32 dturd1;
+	u32 dturd2;
+	u32 dturd3;
+	u32 dtulfsrwd;
+	u32 dtulfsrrd;
+	u32 dtueaf;
+	u32 dfitctrldelay;
+	u32 dfiodtcfg;
+	u32 dfiodtcfg1;
+	u32 dfiodtrankmap;
+	u32 dfitphywrdata;
+	u32 dfitphywrlat;
+	u32 reserved7[2];
+	u32 dfitrddataen;
+	u32 dfitphyrdlat;
+	u32 reserved8[2];
+	u32 dfitphyupdtype0;
+	u32 dfitphyupdtype1;
+	u32 dfitphyupdtype2;
+	u32 dfitphyupdtype3;
+	u32 dfitctrlupdmin;
+	u32 dfitctrlupdmax;
+	u32 dfitctrlupddly;
+	u32 reserved9;
+	u32 dfiupdcfg;
+	u32 dfitrefmski;
+	u32 dfitctrlupdi;
+	u32 reserved10[4];
+	u32 dfitrcfg0;
+	u32 dfitrstat0;
+	u32 dfitrwrlvlen;
+	u32 dfitrrdlvlen;
+	u32 dfitrrdlvlgateen;
+	u32 dfiststat0;
+	u32 dfistcfg0;
+	u32 dfistcfg1;
+	u32 reserved11;
+	u32 dfitdramclken;
+	u32 dfitdramclkdis;
+	u32 dfistcfg2;
+	u32 dfistparclr;
+	u32 dfistparlog;
+	u32 reserved12[3];
+	u32 dfilpcfg0;
+	u32 reserved13[3];
+	u32 dfitrwrlvlresp0;
+	u32 dfitrwrlvlresp1;
+	u32 dfitrwrlvlresp2;
+	u32 dfitrrdlvlresp0;
+	u32 dfitrrdlvlresp1;
+	u32 dfitrrdlvlresp2;
+	u32 dfitrwrlvldelay0;
+	u32 dfitrwrlvldelay1;
+	u32 dfitrwrlvldelay2;
+	u32 dfitrrdlvldelay0;
+	u32 dfitrrdlvldelay1;
+	u32 dfitrrdlvldelay2;
+	u32 dfitrrdlvlgatedelay0;
+	u32 dfitrrdlvlgatedelay1;
+	u32 dfitrrdlvlgatedelay2;
+	u32 dfitrcmd;
+	u32 reserved14[46];
+	u32 ipvr;
+	u32 iptr;
+};
+check_member(rk3368_ddr_pctl, iptr, 0x03fc);
+
+struct rk3368_ddrphy {
+	u32 reg[0x100];
+};
+check_member(rk3368_ddrphy, reg[0xff], 0x03fc);
+
+struct rk3368_msch {
+	u32 coreid;
+	u32 revisionid;
+	u32 ddrconf;
+	u32 ddrtiming;
+	u32 ddrmode;
+	u32 readlatency;
+	u32 reserved1[8];
+	u32 activate;
+	u32 devtodev;
+};
+check_member(rk3368_msch, devtodev, 0x003c);
+
+/* GRF_SOC_CON0 */
+enum {
+	NOC_RSP_ERR_STALL = BIT(9),
+	MOBILE_DDR_SEL = BIT(4),
+	DDR0_16BIT_EN = BIT(3),
+	MSCH0_MAINDDR3_DDR3 = BIT(2),
+	MSCH0_MAINPARTIALPOP = BIT(1),
+	UPCTL_C_ACTIVE = BIT(0),
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/edp_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/edp_rk3288.h
new file mode 100644
index 000000000..9559813e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/edp_rk3288.h
@@ -0,0 +1,638 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Copyright 2014 Rockchip Inc.
+ */
+
+#ifndef _ASM_ARCH_EDP_H
+#define _ASM_ARCH_EDP_H
+
+struct rk3288_edp {
+	u8	res0[0x10];
+	u32	dp_tx_version;
+	u8	res1[0x4];
+	u32	func_en_1;
+	u32	func_en_2;
+	u32	video_ctl_1;
+	u32	video_ctl_2;
+	u32	video_ctl_3;
+	u32	video_ctl_4;
+	u8	res2[0xc];
+	u32	video_ctl_8;
+	u8	res3[0x4];
+	u32	video_ctl_10;
+	u32	total_line_l;
+	u32	total_line_h;
+	u32	active_line_l;
+	u32	active_line_h;
+	u32	v_f_porch;
+	u32	vsync;
+	u32	v_b_porch;
+	u32	total_pixel_l;
+	u32	total_pixel_h;
+	u32	active_pixel_l;
+	u32	active_pixel_h;
+	u32	h_f_porch_l;
+	u32	h_f_porch_h;
+	u32	hsync_l;
+	u32	hysnc_h;
+	u32	h_b_porch_l;
+	u32	h_b_porch_h;
+	u32	vid_status;
+	u32	total_line_sta_l;
+	u32	total_line_sta_h;
+	u32	active_line_sta_l;
+	u32	active_line_sta_h;
+	u32	v_f_porch_sta;
+	u32	vsync_sta;
+	u32	v_b_porch_sta;
+	u32	total_pixel_sta_l;
+	u32	total_pixel_sta_h;
+	u32	active_pixel_sta_l;
+	u32	active_pixel_sta_h;
+	u32	h_f_porch_sta_l;
+	u32	h_f_porch_sta_h;
+	u32	hsync_sta_l;
+	u32	hsync_sta_h;
+	u32	h_b_porch_sta_l;
+	u32	h_b_porch__sta_h;
+	u8      res4[0x28];
+	u32	pll_reg_1;
+	u8	res5[4];
+	u32	ssc_reg;
+	u8	res6[0xc];
+	u32	tx_common;
+	u32	tx_common2;
+	u8	res7[0x4];
+	u32	dp_aux;
+	u32	dp_bias;
+	u32	dp_test;
+	u32	dp_pd;
+	u32	dp_reserv1;
+	u32	dp_reserv2;
+	u8	res8[0x224];
+	u32	lane_map;
+	u8	res9[0x14];
+	u32	analog_ctl_2;
+	u8	res10[0x48];
+	u32	int_state;
+	u32	common_int_sta_1;
+	u32	common_int_sta_2;
+	u32	common_int_sta_3;
+	u32	common_int_sta_4;
+	u32	spdif_biphase_int_sta;
+	u8	res11[0x4];
+	u32	dp_int_sta;
+	u32	common_int_mask_1;
+	u32	common_int_mask_2;
+	u32	common_int_mask_3;
+	u32	common_int_mask_4;
+	u8	res12[0x08];
+	u32	int_sta_mask;
+	u32	int_ctl;
+	u8	res13[0x200];
+	u32	sys_ctl_1;
+	u32	sys_ctl_2;
+	u32	sys_ctl_3;
+	u32	sys_ctl_4;
+	u32	dp_vid_ctl;
+	u8	res14[0x4];
+	u32	dp_aud_ctl;
+	u8	res15[0x24];
+	u32	pkt_send_ctl;
+	u8	res16[0x4];
+	u32	dp_hdcp_ctl;
+	u8	res17[0x34];
+	u32	link_bw_set;
+	u32	lane_count_set;
+	u32	dp_training_ptn_set;
+	u32	ln_link_trn_ctl[4];
+	u8	res18[0x4];
+	u32	dp_hw_link_training;
+	u8	res19[0x1c];
+	u32	dp_debug_ctl;
+	u32	hpd_deglitch_l;
+	u32	hpd_deglitch_h;
+	u8	res20[0x14];
+	u32	dp_link_debug_ctl;
+	u8	res21[0x1c];
+	u32	m_vid_0;
+	u32	m_vid_1;
+	u32	m_vid_2;
+	u32	n_vid_0;
+	u32	n_vid_1;
+	u32	n_vid_2;
+	u32	m_vid_mon;
+	u8	res22[0x14];
+	u32	dp_video_fifo_thrd;
+	u8	res23[0x8];
+	u32	dp_audio_margin;
+	u8	res24[0x20];
+	u32	dp_m_cal_ctl;
+	u32	m_vid_gen_filter_th;
+	u8	res25[0x10];
+	u32	m_aud_gen_filter_th;
+	u8	res26[0x4];
+	u32	aux_ch_sta;
+	u32	aux_err_num;
+	u32	aux_ch_defer_dtl;
+	u32	aux_rx_comm;
+	u32	buf_data_ctl;
+	u32	aux_ch_ctl_1;
+	u32	aux_addr_7_0;
+	u32	aux_addr_15_8;
+	u32	aux_addr_19_16;
+	u32	aux_ch_ctl_2;
+	u8	res27[0x18];
+	u32	buf_data[16];
+	u32	soc_general_ctl;
+	u8	res29[0x1e0];
+	u32	pll_reg_2;
+	u32	pll_reg_3;
+	u32	pll_reg_4;
+	u8	res30[0x10];
+	u32	pll_reg_5;
+};
+check_member(rk3288_edp, pll_reg_5, 0xa00);
+
+/* func_en_1 */
+#define VID_CAP_FUNC_EN_N			(0x1 << 6)
+#define VID_FIFO_FUNC_EN_N			(0x1 << 5)
+#define AUD_FIFO_FUNC_EN_N			(0x1 << 4)
+#define AUD_FUNC_EN_N				(0x1 << 3)
+#define HDCP_FUNC_EN_N				(0x1 << 2)
+#define SW_FUNC_EN_N				(0x1 << 0)
+
+/* func_en_2 */
+#define SSC_FUNC_EN_N				(0x1 << 7)
+#define AUX_FUNC_EN_N				(0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N			(0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N			(0x1 << 0)
+
+/* video_ctl_1 */
+#define VIDEO_EN				(0x1 << 7)
+#define VIDEO_MUTE				(0x1 << 6)
+
+/* video_ctl_2 */
+#define IN_D_RANGE_MASK				(0x1 << 7)
+#define IN_D_RANGE_SHIFT			(7)
+#define IN_D_RANGE_CEA				(0x1 << 7)
+#define IN_D_RANGE_VESA				(0x0 << 7)
+#define IN_BPC_MASK				(0x7 << 4)
+#define IN_BPC_SHIFT				(4)
+#define IN_BPC_12_BITS				(0x3 << 4)
+#define IN_BPC_10_BITS				(0x2 << 4)
+#define IN_BPC_8_BITS				(0x1 << 4)
+#define IN_BPC_6_BITS				(0x0 << 4)
+#define IN_COLOR_F_MASK				(0x3 << 0)
+#define IN_COLOR_F_SHIFT			(0)
+#define IN_COLOR_F_YCBCR444			(0x2 << 0)
+#define IN_COLOR_F_YCBCR422			(0x1 << 0)
+#define IN_COLOR_F_RGB				(0x0 << 0)
+
+/* video_ctl_3 */
+#define IN_YC_COEFFI_MASK			(0x1 << 7)
+#define IN_YC_COEFFI_SHIFT			(7)
+#define IN_YC_COEFFI_ITU709			(0x1 << 7)
+#define IN_YC_COEFFI_ITU601			(0x0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK		(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT		(4)
+#define VID_CHK_UPDATE_TYPE_1			(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_0			(0x0 << 4)
+
+/* video_ctl_4 */
+#define BIST_EN					(0x1 << 3)
+#define BIST_WH_64				(0x1 << 2)
+#define BIST_WH_32				(0x0 << 2)
+#define BIST_TYPE_COLR_BAR			(0x0 << 0)
+#define BIST_TYPE_GRAY_BAR			(0x1 << 0)
+#define BIST_TYPE_MOBILE_BAR			(0x2 << 0)
+
+/* video_ctl_8 */
+#define VID_HRES_TH(x)				(((x) & 0xf) << 4)
+#define VID_VRES_TH(x)				(((x) & 0xf) << 0)
+
+/* video_ctl_10 */
+#define F_SEL					(0x1 << 4)
+#define INTERACE_SCAN_CFG			(0x1 << 2)
+#define INTERACD_SCAN_CFG_OFFSET		2
+#define VSYNC_POLARITY_CFG			(0x1 << 1)
+#define VSYNC_POLARITY_CFG_OFFSET		1
+#define HSYNC_POLARITY_CFG			(0x1 << 0)
+#define HSYNC_POLARITY_CFG_OFFSET		0
+
+/* dp_pd */
+#define PD_INC_BG				(0x1 << 7)
+#define PD_EXP_BG				(0x1 << 6)
+#define PD_AUX					(0x1 << 5)
+#define PD_PLL					(0x1 << 4)
+#define PD_CH3					(0x1 << 3)
+#define PD_CH2					(0x1 << 2)
+#define PD_CH1					(0x1 << 1)
+#define PD_CH0					(0x1 << 0)
+
+/* pll_reg_1 */
+#define REF_CLK_24M				(0x1 << 0)
+#define REF_CLK_27M				(0x0 << 0)
+#define REF_CLK_MASK				(0x1 << 0)
+
+/* line_map */
+#define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
+#define LANE3_MAP_LOGIC_LANE_1			(0x1 << 6)
+#define LANE3_MAP_LOGIC_LANE_2			(0x2 << 6)
+#define LANE3_MAP_LOGIC_LANE_3			(0x3 << 6)
+#define LANE2_MAP_LOGIC_LANE_0			(0x0 << 4)
+#define LANE2_MAP_LOGIC_LANE_1			(0x1 << 4)
+#define LANE2_MAP_LOGIC_LANE_2			(0x2 << 4)
+#define LANE2_MAP_LOGIC_LANE_3			(0x3 << 4)
+#define LANE1_MAP_LOGIC_LANE_0			(0x0 << 2)
+#define LANE1_MAP_LOGIC_LANE_1			(0x1 << 2)
+#define LANE1_MAP_LOGIC_LANE_2			(0x2 << 2)
+#define LANE1_MAP_LOGIC_LANE_3			(0x3 << 2)
+#define LANE0_MAP_LOGIC_LANE_0			(0x0 << 0)
+#define LANE0_MAP_LOGIC_LANE_1			(0x1 << 0)
+#define LANE0_MAP_LOGIC_LANE_2			(0x2 << 0)
+#define LANE0_MAP_LOGIC_LANE_3			(0x3 << 0)
+
+/* analog_ctl_2 */
+#define SEL_24M					(0x1 << 3)
+
+/* common_int_sta_1 */
+#define VSYNC_DET				(0x1 << 7)
+#define PLL_LOCK_CHG				(0x1 << 6)
+#define SPDIF_ERR				(0x1 << 5)
+#define SPDIF_UNSTBL				(0x1 << 4)
+#define VID_FORMAT_CHG				(0x1 << 3)
+#define AUD_CLK_CHG				(0x1 << 2)
+#define VID_CLK_CHG				(0x1 << 1)
+#define SW_INT					(0x1 << 0)
+
+/* common_int_sta_2 */
+#define ENC_EN_CHG				(0x1 << 6)
+#define HW_BKSV_RDY				(0x1 << 3)
+#define HW_SHA_DONE				(0x1 << 2)
+#define HW_AUTH_STATE_CHG			(0x1 << 1)
+#define HW_AUTH_DONE				(0x1 << 0)
+
+/* common_int_sta_3 */
+#define AFIFO_UNDER				(0x1 << 7)
+#define AFIFO_OVER				(0x1 << 6)
+#define R0_CHK_FLAG				(0x1 << 5)
+
+/* common_int_sta_4 */
+#define PSR_ACTIVE				(0x1 << 7)
+#define PSR_INACTIVE				(0x1 << 6)
+#define SPDIF_BI_PHASE_ERR			(0x1 << 5)
+#define HOTPLUG_CHG				(0x1 << 2)
+#define HPD_LOST				(0x1 << 1)
+#define PLUG					(0x1 << 0)
+
+/* dp_int_sta */
+#define INT_HPD					(0x1 << 6)
+#define HW_LT_DONE				(0x1 << 5)
+#define SINK_LOST				(0x1 << 3)
+#define LINK_LOST				(0x1 << 2)
+#define RPLY_RECEIV				(0x1 << 1)
+#define AUX_ERR					(0x1 << 0)
+
+/* int_ctl */
+#define SOFT_INT_CTRL				(0x1 << 2)
+#define INT_POL1				(0x1 << 1)
+#define INT_POL0				(0x1 << 0)
+#define INT_POL					(INT_POL0 | INT_POL1)
+
+/* sys_ctl_1 */
+#define DET_STA					(0x1 << 2)
+#define FORCE_DET				(0x1 << 1)
+#define DET_CTRL				(0x1 << 0)
+
+/* sys_ctl_2 */
+#define CHA_CRI(x)				(((x) & 0xf) << 4)
+#define CHA_STA					(0x1 << 2)
+#define FORCE_CHA				(0x1 << 1)
+#define CHA_CTRL				(0x1 << 0)
+
+/* sys_ctl_3 */
+#define HPD_STATUS				(0x1 << 6)
+#define F_HPD					(0x1 << 5)
+#define HPD_CTRL				(0x1 << 4)
+#define HDCP_RDY				(0x1 << 3)
+#define STRM_VALID				(0x1 << 2)
+#define F_VALID					(0x1 << 1)
+#define VALID_CTRL				(0x1 << 0)
+
+/* sys_ctl_4 */
+#define FIX_M_AUD				(0x1 << 4)
+#define ENHANCED				(0x1 << 3)
+#define FIX_M_VID				(0x1 << 2)
+#define M_VID_UPDATE_CTRL			(0x3 << 0)
+
+/* pll_reg_2 */
+#define LDO_OUTPUT_V_SEL_145			(2 << 6)
+#define KVCO_DEFALUT				(1 << 4)
+#define CHG_PUMP_CUR_SEL_5US			(1 << 2)
+#define V2L_CUR_SEL_1MA				(1 << 0)
+
+/* pll_reg_3 */
+#define LOCK_DET_CNT_SEL_256			(2 << 5)
+#define LOOP_FILTER_RESET			(0 << 4)
+#define PALL_SSC_RESET				(0 << 3)
+#define LOCK_DET_BYPASS				(0 << 2)
+#define PLL_LOCK_DET_MODE			(0 << 1)
+#define PLL_LOCK_DET_FORCE			(0 << 0)
+
+/* pll_reg_5 */
+#define REGULATOR_V_SEL_950MV			(2 << 4)
+#define STANDBY_CUR_SEL				(0 << 3)
+#define CHG_PUMP_INOUT_CTRL_1200MV		(1 << 1)
+#define CHG_PUMP_INPUT_CTRL_OP			(0 << 0)
+
+/* ssc_reg */
+#define SSC_OFFSET				(0 << 6)
+#define SSC_MODE				(1 << 4)
+#define SSC_DEPTH				(9 << 0)
+
+/* tx_common */
+#define TX_SWING_PRE_EMP_MODE			(1 << 7)
+#define PRE_DRIVER_PW_CTRL1			(0 << 5)
+#define LP_MODE_CLK_REGULATOR			(0 << 4)
+#define RESISTOR_MSB_CTRL			(0 << 3)
+#define RESISTOR_CTRL				(7 << 0)
+
+/* dp_aux */
+#define DP_AUX_COMMON_MODE			(0 << 4)
+#define DP_AUX_EN				(0 << 3)
+#define AUX_TERM_50OHM				(3 << 0)
+
+/* dp_bias */
+#define DP_BG_OUT_SEL				(4 << 4)
+#define DP_DB_CUR_CTRL				(0 << 3)
+#define DP_BG_SEL				(1 << 2)
+#define DP_RESISTOR_TUNE_BG			(2 << 0)
+
+/* dp_reserv2 */
+#define CH1_CH3_SWING_EMP_CTRL			(5 << 4)
+#define CH0_CH2_SWING_EMP_CTRL			(5 << 0)
+
+/* dp_training_ptn_set */
+#define SCRAMBLING_DISABLE			(0x1 << 5)
+#define SCRAMBLING_ENABLE			(0x0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK		(0x7 << 2)
+#define LINK_QUAL_PATTERN_SET_HBR2		(0x5 << 2)
+#define LINK_QUAL_PATTERN_SET_80BIT		(0x4 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2		(0x1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE		(0x0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK		(0x3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2		(0x2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1		(0x1 << 0)
+#define SW_TRAINING_PATTERN_SET_DISABLE		(0x0 << 0)
+
+/* dp_hw_link_training_ctl */
+#define HW_LT_ERR_CODE_MASK			0x70
+#define HW_LT_ERR_CODE_SHIFT			4
+#define HW_LT_EN				(0x1 << 0)
+
+/* dp_debug_ctl */
+#define PLL_LOCK				(0x1 << 4)
+#define F_PLL_LOCK				(0x1 << 3)
+#define PLL_LOCK_CTRL				(0x1 << 2)
+#define POLL_EN					(0x1 << 1)
+#define PN_INV					(0x1 << 0)
+
+/* aux_ch_sta */
+#define AUX_BUSY				(0x1 << 4)
+#define AUX_STATUS_MASK				(0xf << 0)
+
+/* aux_ch_defer_ctl */
+#define DEFER_CTRL_EN				(0x1 << 7)
+#define DEFER_COUNT(x)				(((x) & 0x7f) << 0)
+
+/* aux_rx_comm */
+#define AUX_RX_COMM_I2C_DEFER			(0x2 << 2)
+#define AUX_RX_COMM_AUX_DEFER			(0x2 << 0)
+
+/* buffer_data_ctl */
+#define BUF_CLR					(0x1 << 7)
+#define BUF_HAVE_DATA				(0x1 << 4)
+#define BUF_DATA_COUNT(x)			(((x) & 0xf) << 0)
+
+/* aux_ch_ctl_1 */
+#define AUX_LENGTH(x)				(((x - 1) & 0xf) << 4)
+#define AUX_TX_COMM_MASK			(0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION		(0x1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION		(0x0 << 3)
+#define AUX_TX_COMM_MOT				(0x1 << 2)
+#define AUX_TX_COMM_WRITE			(0x0 << 0)
+#define AUX_TX_COMM_READ			(0x1 << 0)
+
+/* aux_ch_ctl_2 */
+#define PD_AUX_IDLE				(0x1 << 3)
+#define ADDR_ONLY				(0x1 << 1)
+#define AUX_EN					(0x1 << 0)
+
+/* tx_sw_reset */
+#define RST_DP_TX				(0x1 << 0)
+
+/* analog_ctl_1 */
+#define TX_TERMINAL_CTRL_50_OHM			(0x1 << 4)
+
+/* analog_ctl_3 */
+#define DRIVE_DVDD_BIT_1_0625V			(0x4 << 5)
+#define VCO_BIT_600_MICRO			(0x5 << 0)
+
+/* pll_filter_ctl_1 */
+#define PD_RING_OSC				(0x1 << 6)
+#define AUX_TERMINAL_CTRL_37_5_OHM		(0x0 << 4)
+#define AUX_TERMINAL_CTRL_45_OHM		(0x1 << 4)
+#define AUX_TERMINAL_CTRL_50_OHM		(0x2 << 4)
+#define AUX_TERMINAL_CTRL_65_OHM		(0x3 << 4)
+#define TX_CUR1_2X				(0x1 << 2)
+#define TX_CUR_16_MA				(0x3 << 0)
+
+/* Definition for DPCD Register */
+#define DPCD_DPCD_REV				(0x0000)
+#define DPCD_MAX_LINK_RATE			(0x0001)
+#define DPCD_MAX_LANE_COUNT			(0x0002)
+#define DP_MAX_LANE_COUNT_MASK			0x1f
+#define DP_TPS3_SUPPORTED			(1 << 6)
+#define DP_ENHANCED_FRAME_CAP			(1 << 7)
+
+#define DPCD_LINK_BW_SET			(0x0100)
+#define DPCD_LANE_COUNT_SET			(0x0101)
+
+#define DPCD_TRAINING_PATTERN_SET		(0x0102)
+#define DP_TRAINING_PATTERN_DISABLE		0
+#define DP_TRAINING_PATTERN_1			1
+#define DP_TRAINING_PATTERN_2			2
+#define DP_TRAINING_PATTERN_3			3
+#define DP_TRAINING_PATTERN_MASK		0x3
+
+#define DPCD_TRAINING_LANE0_SET			(0x0103)
+#define DP_TRAIN_VOLTAGE_SWING_MASK		0x3
+#define DP_TRAIN_VOLTAGE_SWING_SHIFT		0
+#define DP_TRAIN_MAX_SWING_REACHED		(1 << 2)
+#define DP_TRAIN_VOLTAGE_SWING_400		(0 << 0)
+#define DP_TRAIN_VOLTAGE_SWING_600		(1 << 0)
+#define DP_TRAIN_VOLTAGE_SWING_800		(2 << 0)
+#define DP_TRAIN_VOLTAGE_SWING_1200		(3 << 0)
+
+#define DP_TRAIN_PRE_EMPHASIS_MASK		(3 << 3)
+#define DP_TRAIN_PRE_EMPHASIS_0			(0 << 3)
+#define DP_TRAIN_PRE_EMPHASIS_3_5		(1 << 3)
+#define DP_TRAIN_PRE_EMPHASIS_6			(2 << 3)
+#define DP_TRAIN_PRE_EMPHASIS_9_5		(3 << 3)
+
+#define DP_TRAIN_PRE_EMPHASIS_SHIFT		3
+#define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED	(1 << 5)
+
+#define DPCD_LANE0_1_STATUS			(0x0202)
+#define DPCD_LANE2_3_STATUS			(0x0203)
+#define DP_LANE_CR_DONE				(1 << 0)
+#define DP_LANE_CHANNEL_EQ_DONE			(1 << 1)
+#define DP_LANE_SYMBOL_LOCKED			(1 << 2)
+#define DP_CHANNEL_EQ_BITS			(DP_LANE_CR_DONE |\
+						DP_LANE_CHANNEL_EQ_DONE |\
+						DP_LANE_SYMBOL_LOCKED)
+
+#define DPCD_LANE_ALIGN_STATUS_UPDATED		(0x0204)
+#define DP_INTERLANE_ALIGN_DONE			(1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED	(1 << 6)
+#define DP_LINK_STATUS_UPDATED			(1 << 7)
+
+#define DPCD_ADJUST_REQUEST_LANE0_1		(0x0206)
+#define DPCD_ADJUST_REQUEST_LANE2_3		(0x0207)
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK	0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT	0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK	0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT	2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK	0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT	4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK	0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT	6
+
+#define DPCD_TEST_REQUEST			(0x0218)
+#define DPCD_TEST_RESPONSE			(0x0260)
+#define DPCD_TEST_EDID_CHECKSUM			(0x0261)
+#define DPCD_LINK_POWER_STATE			(0x0600)
+#define DP_SET_POWER_D0				0x1
+#define DP_SET_POWER_D3				0x2
+#define DP_SET_POWER_MASK			0x3
+
+#define AUX_ADDR_7_0(x)				(((x) >> 0) & 0xff)
+#define AUX_ADDR_15_8(x)			(((x) >> 8) & 0xff)
+#define AUX_ADDR_19_16(x)			(((x) >> 16) & 0x0f)
+
+#define STREAM_ON_TIMEOUT 100
+#define PLL_LOCK_TIMEOUT 10
+#define DP_INIT_TRIES 10
+
+#define EDID_ADDR				0x50
+#define EDID_LENGTH				0x80
+#define EDID_HEADER				0x00
+#define EDID_EXTENSION_FLAG			0x7e
+
+
+enum dpcd_request {
+	DPCD_READ,
+	DPCD_WRITE,
+};
+
+enum dp_irq_type {
+	DP_IRQ_TYPE_HP_CABLE_IN,
+	DP_IRQ_TYPE_HP_CABLE_OUT,
+	DP_IRQ_TYPE_HP_CHANGE,
+	DP_IRQ_TYPE_UNKNOWN,
+};
+
+enum color_coefficient {
+	COLOR_YCBCR601,
+	COLOR_YCBCR709
+};
+
+enum dynamic_range {
+	VESA,
+	CEA
+};
+
+enum clock_recovery_m_value_type {
+	CALCULATED_M,
+	REGISTER_M
+};
+
+enum video_timing_recognition_type {
+	VIDEO_TIMING_FROM_CAPTURE,
+	VIDEO_TIMING_FROM_REGISTER
+};
+
+enum pattern_set {
+	PRBS7,
+	D10_2,
+	TRAINING_PTN1,
+	TRAINING_PTN2,
+	DP_NONE
+};
+
+enum color_space {
+	CS_RGB,
+	CS_YCBCR422,
+	CS_YCBCR444
+};
+
+enum color_depth {
+	COLOR_6,
+	COLOR_8,
+	COLOR_10,
+	COLOR_12
+};
+
+enum link_rate_type {
+	LINK_RATE_1_62GBPS = 0x06,
+	LINK_RATE_2_70GBPS = 0x0a
+};
+
+enum link_lane_count_type {
+	LANE_CNT1 = 1,
+	LANE_CNT2 = 2,
+	LANE_CNT4 = 4
+};
+
+enum link_training_state {
+	LT_START,
+	LT_CLK_RECOVERY,
+	LT_EQ_TRAINING,
+	FINISHED,
+	FAILED
+};
+
+enum voltage_swing_level {
+	VOLTAGE_LEVEL_0,
+	VOLTAGE_LEVEL_1,
+	VOLTAGE_LEVEL_2,
+	VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+	PRE_EMPHASIS_LEVEL_0,
+	PRE_EMPHASIS_LEVEL_1,
+	PRE_EMPHASIS_LEVEL_2,
+	PRE_EMPHASIS_LEVEL_3,
+};
+
+enum analog_power_block {
+	AUX_BLOCK,
+	CH0_BLOCK,
+	CH1_BLOCK,
+	CH2_BLOCK,
+	CH3_BLOCK,
+	ANALOG_TOTAL,
+	POWER_ALL
+};
+
+struct link_train {
+	unsigned char revision;
+	u8 link_rate;
+	u8 lane_count;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/f_rockusb.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/f_rockusb.h
new file mode 100644
index 000000000..977232102
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/f_rockusb.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017
+ *
+ * Eddie Cai <eddie.cai.linux@gmail.com>
+ */
+
+#ifndef _F_ROCKUSB_H_
+#define _F_ROCKUSB_H_
+#include <blk.h>
+
+#define ROCKUSB_VERSION		"0.1"
+
+#define ROCKUSB_INTERFACE_CLASS	0xff
+#define ROCKUSB_INTERFACE_SUB_CLASS	0x06
+#define ROCKUSB_INTERFACE_PROTOCOL	0x05
+
+#define RX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0  0x0200
+#define RX_ENDPOINT_MAXIMUM_PACKET_SIZE_1_1  0x0040
+#define TX_ENDPOINT_MAXIMUM_PACKET_SIZE      0x0040
+
+#define EP_BUFFER_SIZE			4096
+/*
+ * EP_BUFFER_SIZE must always be an integral multiple of maxpacket size
+ * (64 or 512 or 1024), else we break on certain controllers like DWC3
+ * that expect bulk OUT requests to be divisible by maxpacket size.
+ */
+
+#define RKUSB_BUF_SIZE		EP_BUFFER_SIZE * 2
+#define RKBLOCK_BUF_SIZE		4096
+
+#define RKUSB_STATUS_IDLE			0
+#define RKUSB_STATUS_CMD			1
+#define RKUSB_STATUS_RXDATA			2
+#define RKUSB_STATUS_TXDATA			3
+#define RKUSB_STATUS_CSW			4
+#define RKUSB_STATUS_RXDATA_PREPARE		5
+#define RKUSB_STATUS_TXDATA_PREPARE		6
+
+enum rkusb_command {
+K_FW_TEST_UNIT_READY	= 0x00,
+K_FW_READ_FLASH_ID = 0x01,
+K_FW_SET_DEVICE_ID = 0x02,
+K_FW_TEST_BAD_BLOCK = 0x03,
+K_FW_READ_10 = 0x04,
+K_FW_WRITE_10 = 0x05,
+K_FW_ERASE_10 = 0x06,
+K_FW_WRITE_SPARE = 0x07,
+K_FW_READ_SPARE = 0x08,
+
+K_FW_ERASE_10_FORCE = 0x0b,
+K_FW_GET_VERSION = 0x0c,
+
+K_FW_LBA_READ_10 = 0x14,
+K_FW_LBA_WRITE_10 = 0x15,
+K_FW_ERASE_SYS_DISK = 0x16,
+K_FW_SDRAM_READ_10 = 0x17,
+K_FW_SDRAM_WRITE_10 = 0x18,
+K_FW_SDRAM_EXECUTE = 0x19,
+K_FW_READ_FLASH_INFO = 0x1A,
+K_FW_GET_CHIP_VER = 0x1B,
+K_FW_LOW_FORMAT = 0x1C,
+K_FW_SET_RESET_FLAG = 0x1E,
+K_FW_SPI_READ_10 = 0x21,
+K_FW_SPI_WRITE_10 = 0x22,
+K_FW_LBA_ERASE_10 = 0x25,
+
+K_FW_SESSION = 0X30,
+K_FW_RESET = 0xff,
+};
+
+#define CBW_DIRECTION_OUT		0x00
+#define CBW_DIRECTION_IN		0x80
+
+struct cmd_dispatch_info {
+	enum rkusb_command cmd;
+	/* call back function to handle rockusb command */
+	void (*cb)(struct usb_ep *ep, struct usb_request *req);
+};
+
+/* Bulk-only data structures */
+
+/* Command Block Wrapper */
+struct fsg_bulk_cb_wrap {
+	__le32  signature;              /* Contains 'USBC' */
+	u32     tag;                    /* Unique per command id */
+	__le32  data_transfer_length;   /* Size of the data */
+	u8      flags;                  /* Direction in bit 7 */
+	u8      lun;                    /* lun (normally 0) */
+	u8      length;                 /* Of the CDB, <= MAX_COMMAND_SIZE */
+	u8      CDB[16];                /* Command Data Block */
+};
+
+#define USB_BULK_CB_WRAP_LEN    31
+#define USB_BULK_CB_SIG         0x43425355      /* Spells out USBC */
+#define USB_BULK_IN_FLAG        0x80
+
+/* Command status Wrapper */
+struct bulk_cs_wrap {
+	__le32  signature;              /* Should = 'USBS' */
+	u32     tag;                    /* Same as original command */
+	__le32  residue;                /* Amount not transferred */
+	u8      status;                 /* See below */
+};
+
+#define USB_BULK_CS_WRAP_LEN    13
+#define USB_BULK_CS_SIG         0x53425355      /* Spells out 'USBS' */
+#define USB_STATUS_PASS         0
+#define USB_STATUS_FAIL         1
+#define USB_STATUS_PHASE_ERROR  2
+
+#define CSW_GOOD                0x00
+#define CSW_FAIL                0x01
+
+struct f_rockusb {
+	struct usb_function usb_function;
+	struct usb_ep *in_ep, *out_ep;
+	struct usb_request *in_req, *out_req;
+	char *dev_type;
+	unsigned int dev_index;
+	unsigned int tag;
+	unsigned int lba;
+	unsigned int dl_size;
+	unsigned int dl_bytes;
+	unsigned int ul_size;
+	unsigned int ul_bytes;
+	struct blk_desc *desc;
+	int reboot_flag;
+	void *buf;
+	void *buf_head;
+};
+
+/* init rockusb device, tell rockusb which device you want to read/write*/
+void rockusb_dev_init(char *dev_type, int dev_index);
+#endif /* _F_ROCKUSB_H_ */
+
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/gpio.h
new file mode 100644
index 000000000..1aaec5fae
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/gpio.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Google, Inc
+ */
+
+#ifndef _ASM_ARCH_GPIO_H
+#define _ASM_ARCH_GPIO_H
+
+struct rockchip_gpio_regs {
+	u32 swport_dr;
+	u32 swport_ddr;
+	u32 reserved0[(0x30 - 0x08) / 4];
+	u32 inten;
+	u32 intmask;
+	u32 inttype_level;
+	u32 int_polarity;
+	u32 int_status;
+	u32 int_rawstatus;
+	u32 debounce;
+	u32 porta_eoi;
+	u32 ext_port;
+	u32 reserved1[(0x60 - 0x54) / 4];
+	u32 ls_sync;
+};
+check_member(rockchip_gpio_regs, ls_sync, 0x60);
+
+enum gpio_pu_pd {
+	GPIO_PULL_NORMAL = 0,
+	GPIO_PULL_UP,
+	GPIO_PULL_DOWN,
+	GPIO_PULL_REPEAT,
+};
+
+/* These defines are only used by spl_gpio.h */
+enum {
+	/* Banks have 8 GPIOs, so 3 bits, and there are 4 banks, so 2 bits */
+	GPIO_BANK_SHIFT		= 3,
+	GPIO_BANK_MASK		= 3 << GPIO_BANK_SHIFT,
+
+	GPIO_OFFSET_MASK	= 0x1f,
+};
+
+#define GPIO(bank, offset)	((bank) << GPIO_BANK_SHIFT | (offset))
+
+enum gpio_bank_t {
+	BANK_A = 0,
+	BANK_B,
+	BANK_C,
+	BANK_D,
+};
+
+enum gpio_dir_t {
+	GPIO_INPUT = 0,
+	GPIO_OUTPUT,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_px30.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_px30.h
new file mode 100644
index 000000000..d51e29b19
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_px30.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ */
+#ifndef _ASM_ARCH_GRF_px30_H
+#define _ASM_ARCH_GRF_px30_H
+
+struct px30_grf {
+	unsigned int gpio1al_iomux;
+	unsigned int gpio1ah_iomux;
+	unsigned int gpio1bl_iomux;
+	unsigned int gpio1bh_iomux;
+	unsigned int gpio1cl_iomux;
+	unsigned int gpio1ch_iomux;
+	unsigned int gpio1dl_iomux;
+	unsigned int gpio1dh_iomux;
+
+	unsigned int gpio2al_iomux;
+	unsigned int gpio2ah_iomux;
+	unsigned int gpio2bl_iomux;
+	unsigned int gpio2bh_iomux;
+	unsigned int gpio2cl_iomux;
+	unsigned int gpio2ch_iomux;
+	unsigned int gpio2dl_iomux;
+	unsigned int gpio2dh_iomux;
+
+	unsigned int gpio3al_iomux;
+	unsigned int gpio3ah_iomux;
+	unsigned int gpio3bl_iomux;
+	unsigned int gpio3bh_iomux;
+	unsigned int gpio3cl_iomux;
+	unsigned int gpio3ch_iomux;
+	unsigned int gpio3dl_iomux;
+	unsigned int gpio3dh_iomux;
+
+	unsigned int gpio1a_p;
+	unsigned int gpio1b_p;
+	unsigned int gpio1c_p;
+	unsigned int gpio1d_p;
+	unsigned int gpio2a_p;
+	unsigned int gpio2b_p;
+	unsigned int gpio2c_p;
+	unsigned int gpio2d_p;
+	unsigned int gpio3a_p;
+	unsigned int gpio3b_p;
+	unsigned int gpio3c_p;
+	unsigned int gpio3d_p;
+	unsigned int gpio1a_sr;
+	unsigned int gpio1b_sr;
+	unsigned int gpio1c_sr;
+	unsigned int gpio1d_sr;
+	unsigned int gpio2a_sr;
+	unsigned int gpio2b_sr;
+	unsigned int gpio2c_sr;
+	unsigned int gpio2d_sr;
+	unsigned int gpio3a_sr;
+	unsigned int gpio3b_sr;
+	unsigned int gpio3c_sr;
+	unsigned int gpio3d_sr;
+	unsigned int gpio1a_smt;
+	unsigned int gpio1b_smt;
+	unsigned int gpio1c_smt;
+	unsigned int gpio1d_smt;
+	unsigned int gpio2a_smt;
+	unsigned int gpio2b_smt;
+	unsigned int gpio2c_smt;
+	unsigned int gpio2d_smt;
+	unsigned int gpio3a_smt;
+	unsigned int gpio3b_smt;
+	unsigned int gpio3c_smt;
+	unsigned int gpio3d_smt;
+	unsigned int gpio1a_e;
+	unsigned int gpio1b_e;
+	unsigned int gpio1c_e;
+	unsigned int gpio1d_e;
+	unsigned int gpio2a_e;
+	unsigned int gpio2b_e;
+	unsigned int gpio2c_e;
+	unsigned int gpio2d_e;
+	unsigned int gpio3a_e;
+	unsigned int gpio3b_e;
+	unsigned int gpio3c_e;
+	unsigned int gpio3d_e;
+
+	unsigned int reserved0[(0x180 - 0x11C) / 4 - 1];
+	unsigned int io_vsel;
+	unsigned int iofunc_con0;
+	unsigned int reserved1[(0x400 - 0x184) / 4 - 1];
+	unsigned int soc_con[6];
+	unsigned int reserved2[(0x480 - 0x414) / 4 - 1];
+	unsigned int soc_status0;
+	unsigned int reserved3[(0x500 - 0x480) / 4 - 1];
+	unsigned int cpu_con[3];
+	unsigned int reserved4[5];
+	unsigned int cpu_status[2];
+	unsigned int reserved5[2];
+	unsigned int soc_noc_con[2];
+	unsigned int reserved6[6];
+	unsigned int ddr_bankhash[4];
+	unsigned int reserved7[(0x700 - 0x55c) / 4 - 1];
+	unsigned int host0_con[2];
+	unsigned int reserved8[(0x880 - 0x704) / 4 - 1];
+	unsigned int otg_con3;
+	unsigned int reserved9[3];
+	unsigned int host0_status4;
+	unsigned int reserved10[(0x904 - 0x890) / 4 - 1];
+	unsigned int mac_con1;
+};
+
+check_member(px30_grf, mac_con1, 0x904);
+
+struct px30_pmugrf {
+	unsigned int gpio0al_iomux;
+	unsigned int gpio0bl_iomux;
+	unsigned int gpio0cl_iomux;
+	unsigned int gpio0dl_iomux;
+	unsigned int gpio0a_p;
+	unsigned int gpio0b_p;
+	unsigned int gpio0c_p;
+	unsigned int gpio0d_p;
+	unsigned int gpio0a_e;
+	unsigned int gpio0b_e;
+	unsigned int gpio0c_e;
+	unsigned int gpio0d_e;
+	unsigned int gpio0l_sr;
+	unsigned int gpio0h_sr;
+	unsigned int gpio0l_smt;
+	unsigned int gpio0h_smt;
+	unsigned int reserved1[(0x100 - 0x3c) / 4 - 1];
+	unsigned int soc_con[4];
+	unsigned int reserved2[(0x180 - 0x10c) / 4 - 1];
+	unsigned int pvtm_con[2];
+	unsigned int reserved3[2];
+	unsigned int pvtm_status[2];
+	unsigned int reserved4[(0x200 - 0x194) / 4 - 1];
+	unsigned int os_reg[12];
+	unsigned int reset_function_status;
+};
+
+check_member(px30_pmugrf, reset_function_status, 0x230);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3036.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3036.h
new file mode 100644
index 000000000..08348d822
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3036.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ */
+#ifndef _ASM_ARCH_GRF_RK3036_H
+#define _ASM_ARCH_GRF_RK3036_H
+
+struct rk3036_grf {
+	unsigned int reserved[0x2a];
+	unsigned int gpio0a_iomux;
+	unsigned int gpio0b_iomux;
+	unsigned int gpio0c_iomux;
+	unsigned int gpio0d_iomux;
+
+	unsigned int gpio1a_iomux;
+	unsigned int gpio1b_iomux;
+	unsigned int gpio1c_iomux;
+	unsigned int gpio1d_iomux;
+
+	unsigned int gpio2a_iomux;
+	unsigned int gpio2b_iomux;
+	unsigned int gpio2c_iomux;
+	unsigned int gpio2d_iomux;
+
+	unsigned int reserved2[0x0a];
+	unsigned int gpiods;
+	unsigned int reserved3[0x05];
+	unsigned int gpio0l_pull;
+	unsigned int gpio0h_pull;
+	unsigned int gpio1l_pull;
+	unsigned int gpio1h_pull;
+	unsigned int gpio2l_pull;
+	unsigned int gpio2h_pull;
+	unsigned int reserved4[4];
+	unsigned int soc_con0;
+	unsigned int soc_con1;
+	unsigned int soc_con2;
+	unsigned int soc_status0;
+	unsigned int reserved5;
+	unsigned int soc_con3;
+	unsigned int reserved6;
+	unsigned int dmac_con0;
+	unsigned int dmac_con1;
+	unsigned int dmac_con2;
+	unsigned int reserved7[5];
+	unsigned int uoc0_con5;
+	unsigned int reserved8[4];
+	unsigned int uoc1_con4;
+	unsigned int uoc1_con5;
+	unsigned int reserved9;
+	unsigned int ddrc_stat;
+	unsigned int uoc_con6;
+	unsigned int soc_status1;
+	unsigned int cpu_con0;
+	unsigned int cpu_con1;
+	unsigned int cpu_con2;
+	unsigned int cpu_con3;
+	unsigned int reserved10;
+	unsigned int reserved11;
+	unsigned int cpu_status0;
+	unsigned int cpu_status1;
+	unsigned int os_reg[8];
+	unsigned int reserved12[6];
+	unsigned int dll_con[4];
+	unsigned int dll_status[4];
+	unsigned int dfi_wrnum;
+	unsigned int dfi_rdnum;
+	unsigned int dfi_actnum;
+	unsigned int dfi_timerval;
+	unsigned int nfi_fifo[4];
+	unsigned int reserved13[0x10];
+	unsigned int usbphy0_con[8];
+	unsigned int usbphy1_con[8];
+	unsigned int reserved14[0x10];
+	unsigned int chip_tag;
+	unsigned int sdmmc_det_cnt;
+};
+check_member(rk3036_grf, sdmmc_det_cnt, 0x304);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3128.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3128.h
new file mode 100644
index 000000000..fe07d69b4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3128.h
@@ -0,0 +1,548 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+#ifndef _ASM_ARCH_GRF_RK3128_H
+#define _ASM_ARCH_GRF_RK3128_H
+
+struct rk3128_grf {
+	unsigned int reserved[0x2a];
+	unsigned int gpio0a_iomux;
+	unsigned int gpio0b_iomux;
+	unsigned int gpio0c_iomux;
+	unsigned int gpio0d_iomux;
+	unsigned int gpio1a_iomux;
+	unsigned int gpio1b_iomux;
+	unsigned int gpio1c_iomux;
+	unsigned int gpio1d_iomux;
+	unsigned int gpio2a_iomux;
+	unsigned int gpio2b_iomux;
+	unsigned int gpio2c_iomux;
+	unsigned int gpio2d_iomux;
+	unsigned int gpio3a_iomux;
+	unsigned int gpio3b_iomux;
+	unsigned int gpio3c_iomux;
+	unsigned int gpio3d_iomux;
+	unsigned int gpio2c_iomux2;
+	unsigned int grf_cif_iomux;
+	unsigned int grf_cif_iomux1;
+	unsigned int reserved1[(0x118 - 0xf0) / 4 - 1];
+	unsigned int gpio0l_pull;
+	unsigned int gpio0h_pull;
+	unsigned int gpio1l_pull;
+	unsigned int gpio1h_pull;
+	unsigned int gpio2l_pull;
+	unsigned int gpio2h_pull;
+	unsigned int gpio3l_pull;
+	unsigned int gpio3h_pull;
+	unsigned int reserved2;
+	unsigned int soc_con0;
+	unsigned int soc_con1;
+	unsigned int soc_con2;
+	unsigned int soc_status0;
+	unsigned int reserved3[6];
+	unsigned int mac_con0;
+	unsigned int mac_con1;
+	unsigned int reserved4[4];
+	unsigned int uoc0_con0;
+	unsigned int reserved5;
+	unsigned int uoc1_con1;
+	unsigned int uoc1_con2;
+	unsigned int uoc1_con3;
+	unsigned int uoc1_con4;
+	unsigned int uoc1_con5;
+	unsigned int reserved6;
+	unsigned int ddrc_stat;
+	unsigned int reserved9;
+	unsigned int soc_status1;
+	unsigned int cpu_con0;
+	unsigned int cpu_con1;
+	unsigned int cpu_con2;
+	unsigned int cpu_con3;
+	unsigned int reserved10;
+	unsigned int reserved11;
+	unsigned int cpu_status0;
+	unsigned int cpu_status1;
+	unsigned int os_reg[8];
+	unsigned int reserved12[(0x280 - 0x1e4) / 4 - 1];
+	unsigned int usbphy0_con[8];
+	unsigned int usbphy1_con[8];
+	unsigned int uoc_status0;
+	unsigned int reserved13[(0x300 - 0x2c0) / 4 - 1];
+	unsigned int chip_tag;
+	unsigned int sdmmc_det_cnt;
+};
+check_member(rk3128_grf, sdmmc_det_cnt, 0x304);
+
+struct rk3128_pmu {
+	unsigned int wakeup_cfg;
+	unsigned int pwrdn_con;
+	unsigned int pwrdn_st;
+	unsigned int idle_req;
+	unsigned int idle_st;
+	unsigned int pwrmode_con;
+	unsigned int pwr_state;
+	unsigned int osc_cnt;
+	unsigned int core_pwrdwn_cnt;
+	unsigned int core_pwrup_cnt;
+	unsigned int sft_con;
+	unsigned int ddr_sref_st;
+	unsigned int int_con;
+	unsigned int int_st;
+	unsigned int sys_reg[4];
+};
+check_member(rk3128_pmu, int_st, 0x34);
+
+/* GRF_GPIO0A_IOMUX */
+enum {
+	GPIO0A7_SHIFT		= 14,
+	GPIO0A7_MASK		= 3 << GPIO0A7_SHIFT,
+	GPIO0A7_GPIO		= 0,
+	GPIO0A7_I2C3_SDA,
+
+	GPIO0A6_SHIFT		= 12,
+	GPIO0A6_MASK		= 3 << GPIO0A6_SHIFT,
+	GPIO0A6_GPIO		= 0,
+	GPIO0A6_I2C3_SCL,
+
+	GPIO0A3_SHIFT		= 6,
+	GPIO0A3_MASK		= 3 << GPIO0A3_SHIFT,
+	GPIO0A3_GPIO		= 0,
+	GPIO0A3_I2C1_SDA,
+
+	GPIO0A2_SHIFT		= 4,
+	GPIO0A2_MASK		= 1 << GPIO0A2_SHIFT,
+	GPIO0A2_GPIO		= 0,
+	GPIO0A2_I2C1_SCL,
+
+	GPIO0A1_SHIFT		= 2,
+	GPIO0A1_MASK		= 1 << GPIO0A1_SHIFT,
+	GPIO0A1_GPIO		= 0,
+	GPIO0A1_I2C0_SDA,
+
+	GPIO0A0_SHIFT		= 0,
+	GPIO0A0_MASK		= 1 << GPIO0A0_SHIFT,
+	GPIO0A0_GPIO		= 0,
+	GPIO0A0_I2C0_SCL,
+};
+
+/* GRF_GPIO0B_IOMUX */
+enum {
+	GPIO0B6_SHIFT		= 12,
+	GPIO0B6_MASK		= 3 << GPIO0B6_SHIFT,
+	GPIO0B6_GPIO		= 0,
+	GPIO0B6_I2S_SDI,
+	GPIO0B6_SPI_CSN0,
+
+	GPIO0B5_SHIFT		= 10,
+	GPIO0B5_MASK		= 3 << GPIO0B5_SHIFT,
+	GPIO0B5_GPIO		= 0,
+	GPIO0B5_I2S_SDO,
+	GPIO0B5_SPI_RXD,
+
+	GPIO0B4_SHIFT		= 8,
+	GPIO0B4_MASK		= 1 << GPIO0B4_SHIFT,
+	GPIO0B4_GPIO		= 0,
+	GPIO0B4_I2S_LRCKTX,
+
+	GPIO0B3_SHIFT		= 6,
+	GPIO0B3_MASK		= 3 << GPIO0B3_SHIFT,
+	GPIO0B3_GPIO		= 0,
+	GPIO0B3_I2S_LRCKRX,
+	GPIO0B3_SPI_TXD,
+
+	GPIO0B1_SHIFT		= 2,
+	GPIO0B1_MASK		= 3,
+	GPIO0B1_GPIO		= 0,
+	GPIO0B1_I2S_SCLK,
+	GPIO0B1_SPI_CLK,
+
+	GPIO0B0_SHIFT		= 0,
+	GPIO0B0_MASK		= 3,
+	GPIO0B0_GPIO		= 0,
+	GPIO0B0_I2S1_MCLK,
+};
+
+/* GRF_GPIO0D_IOMUX */
+enum {
+	GPIO0D4_SHIFT		= 8,
+	GPIO0D4_MASK		= 1 << GPIO0D4_SHIFT,
+	GPIO0D4_GPIO		= 0,
+	GPIO0D4_PWM2,
+
+	GPIO0D3_SHIFT		= 6,
+	GPIO0D3_MASK		= 1 << GPIO0D3_SHIFT,
+	GPIO0D3_GPIO		= 0,
+	GPIO0D3_PWM1,
+
+	GPIO0D2_SHIFT		= 4,
+	GPIO0D2_MASK		= 1 << GPIO0D2_SHIFT,
+	GPIO0D2_GPIO		= 0,
+	GPIO0D2_PWM0,
+
+	GPIO0D1_SHIFT		= 2,
+	GPIO0D1_MASK		= 1 << GPIO0D1_SHIFT,
+	GPIO0D1_GPIO		= 0,
+	GPIO0D1_UART2_CTSN,
+
+	GPIO0D0_SHIFT		= 0,
+	GPIO0D0_MASK		= 3 << GPIO0D0_SHIFT,
+	GPIO0D0_GPIO		= 0,
+	GPIO0D0_UART2_RTSN,
+	GPIO0D0_PMIC_SLEEP,
+};
+
+/* GRF_GPIO1A_IOMUX */
+enum {
+	GPIO1A5_SHIFT		= 10,
+	GPIO1A5_MASK		= 3 << GPIO1A5_SHIFT,
+	GPIO1A5_GPIO		= 0,
+	GPIO1A5_I2S_SDI,
+	GPIO1A5_SDMMC_DATA3,
+
+	GPIO1A4_SHIFT		= 8,
+	GPIO1A4_MASK		= 3 << GPIO1A4_SHIFT,
+	GPIO1A4_GPIO		= 0,
+	GPIO1A4_I2S_SD0,
+	GPIO1A4_SDMMC_DATA2,
+
+	GPIO1A3_SHIFT		= 6,
+	GPIO1A3_MASK		= 1 << GPIO1A3_SHIFT,
+	GPIO1A3_GPIO		= 0,
+	GPIO1A3_I2S_LRCKTX,
+
+	GPIO1A2_SHIFT		= 4,
+	GPIO1A2_MASK		= 3 << GPIO1A2_SHIFT,
+	GPIO1A2_GPIO		= 0,
+	GPIO1A2_I2S_LRCKRX,
+	GPIO1A2_SDMMC_DATA1,
+
+	GPIO1A1_SHIFT		= 2,
+	GPIO1A1_MASK		= 3 << GPIO1A1_SHIFT,
+	GPIO1A1_GPIO		= 0,
+	GPIO1A1_I2S_SCLK,
+	GPIO1A1_SDMMC_DATA0,
+	GPIO1A1_PMIC_SLEEP,
+
+	GPIO1A0_SHIFT		= 0,
+	GPIO1A0_MASK		= 3,
+	GPIO1A0_GPIO		= 0,
+	GPIO1A0_I2S_MCLK,
+	GPIO1A0_SDMMC_CLKOUT,
+	GPIO1A0_XIN32K,
+
+};
+
+/* GRF_GPIO1B_IOMUX */
+enum {
+	GPIO1B7_SHIFT		= 14,
+	GPIO1B7_MASK		= 1 << GPIO1B7_SHIFT,
+	GPIO1B7_GPIO		= 0,
+	GPIO1B7_MMC0_CMD,
+
+	GPIO1B6_SHIFT		= 12,
+	GPIO1B6_MASK		= 1 << GPIO1B6_SHIFT,
+	GPIO1B6_GPIO		= 0,
+	GPIO1B6_MMC_PWREN,
+
+	GPIO1B2_SHIFT		= 4,
+	GPIO1B2_MASK		= 3 << GPIO1B2_SHIFT,
+	GPIO1B2_GPIO		= 0,
+	GPIO1B2_SPI_RXD,
+	GPIO1B2_UART1_SIN,
+
+	GPIO1B1_SHIFT		= 2,
+	GPIO1B1_MASK		= 3 << GPIO1B1_SHIFT,
+	GPIO1B1_GPIO		= 0,
+	GPIO1B1_SPI_TXD,
+	GPIO1B1_UART1_SOUT,
+
+	GPIO1B0_SHIFT		= 0,
+	GPIO1B0_MASK		= 3 << GPIO1B0_SHIFT,
+	GPIO1B0_GPIO		= 0,
+	GPIO1B0_SPI_CLK,
+	GPIO1B0_UART1_CTSN
+};
+
+/* GRF_GPIO1C_IOMUX */
+enum {
+	GPIO1C6_SHIFT		= 12,
+	GPIO1C6_MASK		= 3 << GPIO1C6_SHIFT,
+	GPIO1C6_GPIO		= 0,
+	GPIO1C6_NAND_CS2,
+	GPIO1C6_EMMC_CMD,
+
+	GPIO1C5_SHIFT		= 10,
+	GPIO1C5_MASK		= 3 << GPIO1C5_SHIFT,
+	GPIO1C5_GPIO		= 0,
+	GPIO1C5_MMC0_D3,
+	GPIO1C5_JTAG_TMS,
+
+	GPIO1C4_SHIFT		= 8,
+	GPIO1C4_MASK		= 3 << GPIO1C4_SHIFT,
+	GPIO1C4_GPIO		= 0,
+	GPIO1C4_MMC0_D2,
+	GPIO1C4_JTAG_TCK,
+
+	GPIO1C3_SHIFT		= 6,
+	GPIO1C3_MASK		= 3 << GPIO1C3_SHIFT,
+	GPIO1C3_GPIO		= 0,
+	GPIO1C3_MMC0_D1,
+	GPIO1C3_UART2_RX,
+
+	GPIO1C2_SHIFT		= 4,
+	GPIO1C2_MASK		= 3 << GPIO1C2_SHIFT,
+	GPIO1C2_GPIO		= 0,
+	GPIO1C2_MMC0_D0,
+	GPIO1C2_UART2_TX,
+
+	GPIO1C1_SHIFT		= 2,
+	GPIO1C1_MASK		= 1 << GPIO1C1_SHIFT,
+	GPIO1C1_GPIO		= 0,
+	GPIO1C1_MMC0_DETN,
+
+	GPIO1C0_SHIFT		= 0,
+	GPIO1C0_MASK		= 1 << GPIO1C0_SHIFT,
+	GPIO1C0_GPIO		= 0,
+	GPIO1C0_MMC0_CLKOUT,
+};
+
+/* GRF_GPIO1D_IOMUX */
+enum {
+	GPIO1D7_SHIFT		= 14,
+	GPIO1D7_MASK		= 3 << GPIO1D7_SHIFT,
+	GPIO1D7_GPIO		= 0,
+	GPIO1D7_NAND_D7,
+	GPIO1D7_EMMC_D7,
+	GPIO1D7_SPI_CSN1,
+
+	GPIO1D6_SHIFT		= 12,
+	GPIO1D6_MASK		= 3 << GPIO1D6_SHIFT,
+	GPIO1D6_GPIO		= 0,
+	GPIO1D6_NAND_D6,
+	GPIO1D6_EMMC_D6,
+	GPIO1D6_SPI_CSN0,
+
+	GPIO1D5_SHIFT		= 10,
+	GPIO1D5_MASK		= 3 << GPIO1D5_SHIFT,
+	GPIO1D5_GPIO		= 0,
+	GPIO1D5_NAND_D5,
+	GPIO1D5_EMMC_D5,
+	GPIO1D5_SPI_TXD1,
+
+	GPIO1D4_SHIFT		= 8,
+	GPIO1D4_MASK		= 3 << GPIO1D4_SHIFT,
+	GPIO1D4_GPIO		= 0,
+	GPIO1D4_NAND_D4,
+	GPIO1D4_EMMC_D4,
+	GPIO1D4_SPI_RXD1,
+
+	GPIO1D3_SHIFT		= 6,
+	GPIO1D3_MASK		= 3 << GPIO1D3_SHIFT,
+	GPIO1D3_GPIO		= 0,
+	GPIO1D3_NAND_D3,
+	GPIO1D3_EMMC_D3,
+	GPIO1D3_SFC_SIO3,
+
+	GPIO1D2_SHIFT		= 4,
+	GPIO1D2_MASK		= 3 << GPIO1D2_SHIFT,
+	GPIO1D2_GPIO		= 0,
+	GPIO1D2_NAND_D2,
+	GPIO1D2_EMMC_D2,
+	GPIO1D2_SFC_SIO2,
+
+	GPIO1D1_SHIFT		= 2,
+	GPIO1D1_MASK		= 3 << GPIO1D1_SHIFT,
+	GPIO1D1_GPIO		= 0,
+	GPIO1D1_NAND_D1,
+	GPIO1D1_EMMC_D1,
+	GPIO1D1_SFC_SIO1,
+
+	GPIO1D0_SHIFT		= 0,
+	GPIO1D0_MASK		= 3 << GPIO1D0_SHIFT,
+	GPIO1D0_GPIO		= 0,
+	GPIO1D0_NAND_D0,
+	GPIO1D0_EMMC_D0,
+	GPIO1D0_SFC_SIO0,
+};
+
+/* GRF_GPIO2A_IOMUX */
+enum {
+	GPIO2A7_SHIFT		= 14,
+	GPIO2A7_MASK		= 3 << GPIO2A7_SHIFT,
+	GPIO2A7_GPIO		= 0,
+	GPIO2A7_NAND_DQS,
+	GPIO2A7_EMMC_CLKOUT,
+
+	GPIO2A6_SHIFT		= 12,
+	GPIO2A6_MASK		= 1 << GPIO2A6_SHIFT,
+	GPIO2A6_GPIO		= 0,
+	GPIO2A6_NAND_CS0,
+
+	GPIO2A5_SHIFT		= 10,
+	GPIO2A5_MASK		= 3 << GPIO2A5_SHIFT,
+	GPIO2A5_GPIO		= 0,
+	GPIO2A5_NAND_WP,
+	GPIO2A5_EMMC_PWREN,
+
+	GPIO2A4_SHIFT		= 8,
+	GPIO2A4_MASK		= 3 << GPIO2A4_SHIFT,
+	GPIO2A4_GPIO		= 0,
+	GPIO2A4_NAND_RDY,
+	GPIO2A4_EMMC_CMD,
+	GPIO2A3_SFC_CLK,
+
+	GPIO2A3_SHIFT		= 6,
+	GPIO2A3_MASK		= 3 << GPIO2A3_SHIFT,
+	GPIO2A3_GPIO		= 0,
+	GPIO2A3_NAND_RDN,
+	GPIO2A4_SFC_CSN1,
+
+	GPIO2A2_SHIFT		= 4,
+	GPIO2A2_MASK		= 3 << GPIO2A2_SHIFT,
+	GPIO2A2_GPIO		= 0,
+	GPIO2A2_NAND_WRN,
+	GPIO2A4_SFC_CSN0,
+
+	GPIO2A1_SHIFT		= 2,
+	GPIO2A1_MASK		= 3 << GPIO2A1_SHIFT,
+	GPIO2A1_GPIO		= 0,
+	GPIO2A1_NAND_CLE,
+	GPIO2A1_EMMC_CLKOUT,
+
+	GPIO2A0_SHIFT		= 0,
+	GPIO2A0_MASK		= 3 << GPIO2A0_SHIFT,
+	GPIO2A0_GPIO		= 0,
+	GPIO2A0_NAND_ALE,
+	GPIO2A0_SPI_CLK,
+};
+
+/* GRF_GPIO2B_IOMUX */
+enum {
+	GPIO2B7_SHIFT		= 14,
+	GPIO2B7_MASK		= 3 << GPIO2B7_SHIFT,
+	GPIO2B7_GPIO		= 0,
+	GPIO2B7_LCDC0_D13,
+	GPIO2B7_EBC_SDCE5,
+	GPIO2B7_GMAC_RXER,
+
+	GPIO2B6_SHIFT		= 12,
+	GPIO2B6_MASK		= 3 << GPIO2B6_SHIFT,
+	GPIO2B6_GPIO		= 0,
+	GPIO2B6_LCDC0_D12,
+	GPIO2B6_EBC_SDCE4,
+	GPIO2B6_GMAC_CLK,
+
+	GPIO2B5_SHIFT		= 10,
+	GPIO2B5_MASK		= 3 << GPIO2B5_SHIFT,
+	GPIO2B5_GPIO		= 0,
+	GPIO2B5_LCDC0_D11,
+	GPIO2B5_EBC_SDCE3,
+	GPIO2B5_GMAC_TXEN,
+
+	GPIO2B4_SHIFT		= 8,
+	GPIO2B4_MASK		= 3 << GPIO2B4_SHIFT,
+	GPIO2B4_GPIO		= 0,
+	GPIO2B4_LCDC0_D10,
+	GPIO2B4_EBC_SDCE2,
+	GPIO2B4_GMAC_MDIO,
+
+	GPIO2B3_SHIFT		= 6,
+	GPIO2B3_MASK		= 3 << GPIO2B3_SHIFT,
+	GPIO2B3_GPIO		= 0,
+	GPIO2B3_LCDC0_DEN,
+	GPIO2B3_EBC_GDCLK,
+	GPIO2B3_GMAC_RXCLK,
+
+	GPIO2B2_SHIFT		= 4,
+	GPIO2B2_MASK		= 3 << GPIO2B2_SHIFT,
+	GPIO2B2_GPIO		= 0,
+	GPIO2B2_LCDC0_VSYNC,
+	GPIO2B2_EBC_SDOE,
+	GPIO2B2_GMAC_CRS,
+
+	GPIO2B1_SHIFT		= 2,
+	GPIO2B1_MASK		= 3 << GPIO2B1_SHIFT,
+	GPIO2B1_GPIO		= 0,
+	GPIO2B1_LCDC0_HSYNC,
+	GPIO2B1_EBC_SDLE,
+	GPIO2B1_GMAC_TXCLK,
+
+	GPIO2B0_SHIFT		= 0,
+	GPIO2B0_MASK		= 3 << GPIO2B0_SHIFT,
+	GPIO2B0_GPIO		= 0,
+	GPIO2B0_LCDC0_DCLK,
+	GPIO2B0_EBC_SDCLK,
+	GPIO2B0_GMAC_RXDV,
+};
+
+/* GRF_GPIO2C_IOMUX */
+enum {
+	GPIO2C3_SHIFT		= 6,
+	GPIO2C3_MASK		= 3 << GPIO2C3_SHIFT,
+	GPIO2C3_GPIO		= 0,
+	GPIO2C3_LCDC0_D17,
+	GPIO2C3_EBC_GDPWR0,
+	GPIO2C3_GMAC_TXD0,
+
+	GPIO2C2_SHIFT		= 4,
+	GPIO2C2_MASK		= 3 << GPIO2C2_SHIFT,
+	GPIO2C2_GPIO		= 0,
+	GPIO2C2_LCDC0_D16,
+	GPIO2C2_EBC_GDSP,
+	GPIO2C2_GMAC_TXD1,
+
+	GPIO2C1_SHIFT		= 2,
+	GPIO2C1_MASK		= 3 << GPIO2C1_SHIFT,
+	GPIO2C1_GPIO		= 0,
+	GPIO2C1_LCDC0_D15,
+	GPIO2C1_EBC_GDOE,
+	GPIO2C1_GMAC_RXD0,
+
+	GPIO2C0_SHIFT		= 0,
+	GPIO2C0_MASK		= 3 << GPIO2C0_SHIFT,
+	GPIO2C0_GPIO		= 0,
+	GPIO2C0_LCDC0_D14,
+	GPIO2C0_EBC_VCOM,
+	GPIO2C0_GMAC_RXD1,
+};
+
+/* GRF_GPIO2D_IOMUX */
+enum {
+	GPIO2D6_SHIFT		= 12,
+	GPIO2D6_MASK		= 3 << GPIO2D6_SHIFT,
+	GPIO2D6_GPIO		= 0,
+	GPIO2D6_LCDC0_D22,
+	GPIO2D6_GMAC_COL	= 4,
+
+	GPIO2D1_SHIFT		= 2,
+	GPIO2D1_MASK		= 3 << GPIO2D1_SHIFT,
+	GPIO2D1_GPIO		= 0,
+	GPIO2D1_GMAC_MDC	= 3,
+};
+
+/* GRF_GPIO2C_IOMUX2 */
+enum {
+	GPIO2C7_SHIFT		= 12,
+	GPIO2C7_MASK		= 7 << GPIO2C7_SHIFT,
+	GPIO2C7_GPIO		= 0,
+	GPIO2C7_GMAC_TXD3	= 4,
+
+	GPIO2C6_SHIFT		= 12,
+	GPIO2C6_MASK		= 7 << GPIO2C6_SHIFT,
+	GPIO2C6_GPIO		= 0,
+	GPIO2C6_GMAC_TXD2	= 4,
+
+	GPIO2C5_SHIFT		= 4,
+	GPIO2C5_MASK		= 7 << GPIO2C5_SHIFT,
+	GPIO2C5_GPIO		= 0,
+	GPIO2C5_I2C2_SCL	= 3,
+	GPIO2C5_GMAC_RXD2,
+
+	GPIO2C4_SHIFT		= 0,
+	GPIO2C4_MASK		= 7 << GPIO2C4_SHIFT,
+	GPIO2C4_GPIO		= 0,
+	GPIO2C4_I2C2_SDA	= 3,
+	GPIO2C4_GMAC_RXD2,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3188.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3188.h
new file mode 100644
index 000000000..d05197670
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3188.h
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#ifndef _ASM_ARCH_GRF_RK3188_H
+#define _ASM_ARCH_GRF_RK3188_H
+
+struct rk3188_grf_gpio_lh {
+	u32 l;
+	u32 h;
+};
+
+struct rk3188_grf {
+	struct rk3188_grf_gpio_lh gpio_dir[4];
+	struct rk3188_grf_gpio_lh gpio_do[4];
+	struct rk3188_grf_gpio_lh gpio_en[4];
+
+	u32 reserved[2];
+	u32 gpio0c_iomux;
+	u32 gpio0d_iomux;
+
+	u32 gpio1a_iomux;
+	u32 gpio1b_iomux;
+	u32 gpio1c_iomux;
+	u32 gpio1d_iomux;
+
+	u32 gpio2a_iomux;
+	u32 gpio2b_iomux;
+	u32 gpio2c_iomux;
+	u32 gpio2d_iomux;
+
+	u32 gpio3a_iomux;
+	u32 gpio3b_iomux;
+	u32 gpio3c_iomux;
+	u32 gpio3d_iomux;
+
+	u32 soc_con0;
+	u32 soc_con1;
+	u32 soc_con2;
+	u32 soc_status0;
+
+	u32 busdmac_con[3];
+	u32 peridmac_con[4];
+
+	u32 cpu_con[6];
+	u32 reserved0[2];
+
+	u32 ddrc_con0;
+	u32 ddrc_stat;
+
+	u32 io_con[5];
+	u32 soc_status1;
+
+	u32 uoc0_con[4];
+	u32 uoc1_con[4];
+	u32 uoc2_con[2];
+	u32 reserved1;
+	u32 uoc3_con[2];
+	u32 hsic_stat;
+	u32 os_reg[8];
+
+	u32 gpio0_p[3];
+	u32 gpio1_p[3][4];
+
+	u32 flash_data_p;
+	u32 flash_cmd_p;
+};
+check_member(rk3188_grf, flash_cmd_p, 0x01a4);
+
+/* GRF_SOC_CON0 */
+enum {
+	HSADC_CLK_DIR_SHIFT	= 15,
+	HSADC_CLK_DIR_MASK	= 1,
+
+	HSADC_SEL_SHIFT		= 14,
+	HSADC_SEL_MASK		= 1,
+
+	NOC_REMAP_SHIFT		= 12,
+	NOC_REMAP_MASK		= 1,
+
+	EMMC_FLASH_SEL_SHIFT	= 11,
+	EMMC_FLASH_SEL_MASK	= 1,
+
+	TZPC_REVISION_SHIFT	= 7,
+	TZPC_REVISION_MASK	= 0xf,
+
+	L2CACHE_ACC_SHIFT	= 5,
+	L2CACHE_ACC_MASK	= 3,
+
+	L2RD_WAIT_SHIFT		= 3,
+	L2RD_WAIT_MASK		= 3,
+
+	IMEMRD_WAIT_SHIFT	= 1,
+	IMEMRD_WAIT_MASK	= 3,
+};
+
+/* GRF_SOC_CON1 */
+enum {
+	RKI2C4_SEL_SHIFT	= 15,
+	RKI2C4_SEL_MASK		= 1,
+
+	RKI2C3_SEL_SHIFT	= 14,
+	RKI2C3_SEL_MASK		= 1,
+
+	RKI2C2_SEL_SHIFT	= 13,
+	RKI2C2_SEL_MASK		= 1,
+
+	RKI2C1_SEL_SHIFT	= 12,
+	RKI2C1_SEL_MASK		= 1,
+
+	RKI2C0_SEL_SHIFT	= 11,
+	RKI2C0_SEL_MASK		= 1,
+
+	VCODEC_SEL_SHIFT	= 10,
+	VCODEC_SEL_MASK		= 1,
+
+	PERI_EMEM_PAUSE_SHIFT	= 9,
+	PERI_EMEM_PAUSE_MASK	= 1,
+
+	PERI_USB_PAUSE_SHIFT	= 8,
+	PERI_USB_PAUSE_MASK	= 1,
+
+	SMC_MUX_MODE_0_SHIFT	= 6,
+	SMC_MUX_MODE_0_MASK	= 1,
+
+	SMC_SRAM_MW_0_SHIFT	= 4,
+	SMC_SRAM_MW_0_MASK	= 3,
+
+	SMC_REMAP_0_SHIFT	= 3,
+	SMC_REMAP_0_MASK	= 1,
+
+	SMC_A_GT_M0_SYNC_SHIFT	= 2,
+	SMC_A_GT_M0_SYNC_MASK	= 1,
+
+	EMAC_SPEED_SHIFT	= 1,
+	EMAC_SPEEC_MASK		= 1,
+
+	EMAC_MODE_SHIFT		= 0,
+	EMAC_MODE_MASK		= 1,
+};
+
+/* GRF_SOC_CON2 */
+enum {
+	SDIO_CLK_OUT_SR_SHIFT	= 15,
+	SDIO_CLK_OUT_SR_MASK	= 1,
+
+	MEM_EMA_L2C_SHIFT	= 11,
+	MEM_EMA_L2C_MASK	= 7,
+
+	MEM_EMA_A9_SHIFT	= 8,
+	MEM_EMA_A9_MASK		= 7,
+
+	MSCH4_MAINDDR3_SHIFT	= 7,
+	MSCH4_MAINDDR3_MASK	= 1,
+	MSCH4_MAINDDR3_DDR3	= 1,
+
+	EMAC_NEWRCV_EN_SHIFT	= 6,
+	EMAC_NEWRCV_EN_MASK	= 1,
+
+	SW_ADDR15_EN_SHIFT	= 5,
+	SW_ADDR15_EN_MASK	= 1,
+
+	SW_ADDR16_EN_SHIFT	= 4,
+	SW_ADDR16_EN_MASK	= 1,
+
+	SW_ADDR17_EN_SHIFT	= 3,
+	SW_ADDR17_EN_MASK	= 1,
+
+	BANK2_TO_RANK_EN_SHIFT	= 2,
+	BANK2_TO_RANK_EN_MASK	= 1,
+
+	RANK_TO_ROW15_EN_SHIFT	= 1,
+	RANK_TO_ROW15_EN_MASK	= 1,
+
+	UPCTL_C_ACTIVE_IN_SHIFT = 0,
+	UPCTL_C_ACTIVE_IN_MASK	= 1,
+	UPCTL_C_ACTIVE_IN_MAY	= 0,
+	UPCTL_C_ACTIVE_IN_WILL,
+};
+
+/* GRF_DDRC_CON0 */
+enum {
+	DDR_16BIT_EN_SHIFT	= 15,
+	DDR_16BIT_EN_MASK	= 1,
+
+	DTO_LB_SHIFT		= 11,
+	DTO_LB_MASK		= 3,
+
+	DTO_TE_SHIFT		= 9,
+	DTO_TE_MASK		= 3,
+
+	DTO_PDR_SHIFT		= 7,
+	DTO_PDR_MASK		= 3,
+
+	DTO_PDD_SHIFT		= 5,
+	DTO_PDD_MASK		= 3,
+
+	DTO_IOM_SHIFT		= 3,
+	DTO_IOM_MASK		= 3,
+
+	DTO_OE_SHIFT		= 1,
+	DTO_OE_MASK		= 3,
+
+	ATO_AE_SHIFT		= 0,
+	ATO_AE_MASK		= 1,
+};
+
+/* GRF_UOC_CON0 */
+enum {
+	SIDDQ_SHIFT		= 13,
+	SIDDQ_MASK		= 1 << SIDDQ_SHIFT,
+
+	BYPASSSEL_SHIFT		= 9,
+	BYPASSSEL_MASK		= 1 << BYPASSSEL_SHIFT,
+
+	BYPASSDMEN_SHIFT	= 8,
+	BYPASSDMEN_MASK		= 1 << BYPASSDMEN_SHIFT,
+
+	UOC_DISABLE_SHIFT	= 4,
+	UOC_DISABLE_MASK	= 1 << UOC_DISABLE_SHIFT,
+
+	COMMON_ON_N_SHIFT	= 0,
+	COMMON_ON_N_MASK	= 1 << COMMON_ON_N_SHIFT,
+};
+
+/* GRF_UOC_CON2 */
+enum {
+	SOFT_CON_SEL_SHIFT	= 2,
+	SOFT_CON_SEL_MASK	= 1 << SOFT_CON_SEL_SHIFT,
+};
+
+/* GRF_UOC0_CON3 */
+enum {
+	TERMSEL_FULLSPEED_SHIFT	= 5,
+	TERMSEL_FULLSPEED_MASK	= 1 << TERMSEL_FULLSPEED_SHIFT,
+
+	XCVRSELECT_SHIFT	= 3,
+	XCVRSELECT_FSTRANSC	= 1,
+	XCVRSELECT_MASK		= 3 << XCVRSELECT_SHIFT,
+
+	OPMODE_SHIFT		= 1,
+	OPMODE_NODRIVING	= 1,
+	OPMODE_MASK		= 3 << OPMODE_SHIFT,
+
+	SUSPENDN_SHIFT		= 0,
+	SUSPENDN_MASK		= 1 << SUSPENDN_SHIFT,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk322x.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk322x.h
new file mode 100644
index 000000000..5f4d9d822
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk322x.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ */
+#ifndef _ASM_ARCH_GRF_RK322X_H
+#define _ASM_ARCH_GRF_RK322X_H
+
+struct rk322x_grf {
+	unsigned int gpio0a_iomux;
+	unsigned int gpio0b_iomux;
+	unsigned int gpio0c_iomux;
+	unsigned int gpio0d_iomux;
+
+	unsigned int gpio1a_iomux;
+	unsigned int gpio1b_iomux;
+	unsigned int gpio1c_iomux;
+	unsigned int gpio1d_iomux;
+
+	unsigned int gpio2a_iomux;
+	unsigned int gpio2b_iomux;
+	unsigned int gpio2c_iomux;
+	unsigned int gpio2d_iomux;
+
+	unsigned int gpio3a_iomux;
+	unsigned int gpio3b_iomux;
+	unsigned int gpio3c_iomux;
+	unsigned int gpio3d_iomux;
+
+	unsigned int reserved1[4];
+	unsigned int con_iomux;
+	unsigned int reserved2[(0x100 - 0x50) / 4 - 1];
+	unsigned int gpio0_p[4];
+	unsigned int gpio1_p[4];
+	unsigned int gpio2_p[4];
+	unsigned int gpio3_p[4];
+	unsigned int reserved3[(0x200 - 0x13c) / 4 - 1];
+	unsigned int gpio0_e[4];
+	unsigned int gpio1_e[4];
+	unsigned int gpio2_e[4];
+	unsigned int gpio3_e[4];
+	unsigned int reserved4[(0x400 - 0x23c) / 4 - 1];
+	unsigned int soc_con[7];
+	unsigned int reserved5[(0x480 - 0x418) / 4 - 1];
+	unsigned int soc_status[3];
+	unsigned int chip_id;
+	unsigned int reserved6[(0x500 - 0x48c) / 4 - 1];
+	unsigned int cpu_con[4];
+	unsigned int reserved7[4];
+	unsigned int cpu_status[2];
+	unsigned int reserved8[(0x5c8 - 0x524) / 4 - 1];
+	unsigned int os_reg[8];
+	unsigned int reserved9[(0x604 - 0x5e4) / 4 - 1];
+	unsigned int ddrc_stat;
+	unsigned int reserved10[(0x680 - 0x604) / 4 - 1];
+	unsigned int sig_detect_con[2];
+	unsigned int reserved11[(0x690 - 0x684) / 4 - 1];
+	unsigned int sig_detect_status[2];
+	unsigned int reserved12[(0x6a0 - 0x694) / 4 - 1];
+	unsigned int sig_detect_clr[2];
+	unsigned int reserved13[(0x6b0 - 0x6a4) / 4 - 1];
+	unsigned int emmc_det;
+	unsigned int reserved14[(0x700 - 0x6b0) / 4 - 1];
+	unsigned int host0_con[3];
+	unsigned int reserved15;
+	unsigned int host1_con[3];
+	unsigned int reserved16;
+	unsigned int host2_con[3];
+	unsigned int reserved17[(0x760 - 0x728) / 4 - 1];
+	unsigned int usbphy0_con[27];
+	unsigned int reserved18[(0x800 - 0x7c8) / 4 - 1];
+	unsigned int usbphy1_con[27];
+	unsigned int reserved19[(0x880 - 0x868) / 4 - 1];
+	unsigned int otg_con0;
+	unsigned int uoc_status0;
+	unsigned int reserved20[(0x900 - 0x884) / 4 - 1];
+	unsigned int mac_con[2];
+	unsigned int reserved21[(0xb00 - 0x904) / 4 - 1];
+	unsigned int macphy_con[4];
+	unsigned int macphy_status;
+};
+check_member(rk322x_grf, ddrc_stat, 0x604);
+
+struct rk322x_sgrf {
+	unsigned int soc_con[11];
+	unsigned int busdmac_con[4];
+};
+
+/* GRF_MACPHY_CON0 */
+enum {
+	MACPHY_CFG_ENABLE_SHIFT = 0,
+	MACPHY_CFG_ENABLE_MASK  = 1 << MACPHY_CFG_ENABLE_SHIFT,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3288.h
new file mode 100644
index 000000000..894d3a40b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3288.h
@@ -0,0 +1,1155 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2015 Google, Inc
+ * Copyright 2014 Rockchip Inc.
+ */
+
+#ifndef _ASM_ARCH_GRF_RK3288_H
+#define _ASM_ARCH_GRF_RK3288_H
+
+struct rk3288_grf_gpio_lh {
+	u32 l;
+	u32 h;
+};
+
+struct rk3288_grf {
+	u32 reserved[3];
+	u32 gpio1d_iomux;
+	u32 gpio2a_iomux;
+	u32 gpio2b_iomux;
+
+	u32 gpio2c_iomux;
+	u32 reserved2;
+	u32 gpio3a_iomux;
+	u32 gpio3b_iomux;
+
+	u32 gpio3c_iomux;
+	u32 gpio3dl_iomux;
+	u32 gpio3dh_iomux;
+	u32 gpio4al_iomux;
+
+	u32 gpio4ah_iomux;
+	u32 gpio4bl_iomux;
+	u32 reserved3;
+	u32 gpio4c_iomux;
+
+	u32 gpio4d_iomux;
+	u32 reserved4;
+	u32 gpio5b_iomux;
+	u32 gpio5c_iomux;
+
+	u32 reserved5;
+	u32 gpio6a_iomux;
+	u32 gpio6b_iomux;
+	u32 gpio6c_iomux;
+	u32 reserved6;
+	u32 gpio7a_iomux;
+	u32 gpio7b_iomux;
+	u32 gpio7cl_iomux;
+	u32 gpio7ch_iomux;
+	u32 reserved7;
+	u32 gpio8a_iomux;
+	u32 gpio8b_iomux;
+	u32 reserved8[30];
+	struct rk3288_grf_gpio_lh gpio_sr[8];
+	u32 gpio1_p[8][4];
+	u32 gpio1_e[8][4];
+	u32 gpio_smt;
+	u32 soc_con0;
+	u32 soc_con1;
+	u32 soc_con2;
+	u32 soc_con3;
+	u32 soc_con4;
+	u32 soc_con5;
+	u32 soc_con6;
+	u32 soc_con7;
+	u32 soc_con8;
+	u32 soc_con9;
+	u32 soc_con10;
+	u32 soc_con11;
+	u32 soc_con12;
+	u32 soc_con13;
+	u32 soc_con14;
+	u32 soc_status[22];
+	u32 reserved9[2];
+	u32 peridmac_con[4];
+	u32 ddrc0_con0;
+	u32 ddrc1_con0;
+	u32 cpu_con[5];
+	u32 reserved10[3];
+	u32 cpu_status0;
+	u32 reserved11;
+	u32 uoc0_con[5];
+	u32 uoc1_con[5];
+	u32 uoc2_con[4];
+	u32 uoc3_con[2];
+	u32 uoc4_con[2];
+	u32 pvtm_con[3];
+	u32 pvtm_status[3];
+	u32 io_vsel;
+	u32 saradc_testbit;
+	u32 tsadc_testbit_l;
+	u32 tsadc_testbit_h;
+	u32 os_reg[4];
+	u32 reserved12;
+	u32 soc_con15;
+	u32 soc_con16;
+};
+
+struct rk3288_sgrf {
+	u32 soc_con0;
+	u32 soc_con1;
+	u32 soc_con2;
+	u32 soc_con3;
+	u32 soc_con4;
+	u32 soc_con5;
+	u32 reserved1[(0x20-0x18)/4];
+	u32 busdmac_con[2];
+	u32 reserved2[(0x40-0x28)/4];
+	u32 cpu_con[3];
+	u32 reserved3[(0x50-0x4c)/4];
+	u32 soc_con6;
+	u32 soc_con7;
+	u32 soc_con8;
+	u32 soc_con9;
+	u32 soc_con10;
+	u32 soc_con11;
+	u32 soc_con12;
+	u32 soc_con13;
+	u32 soc_con14;
+	u32 soc_con15;
+	u32 soc_con16;
+	u32 soc_con17;
+	u32 soc_con18;
+	u32 soc_con19;
+	u32 soc_con20;
+	u32 soc_con21;
+	u32 reserved4[(0x100-0x90)/4];
+	u32 soc_status[2];
+	u32 reserved5[(0x120-0x108)/4];
+	u32 fast_boot_addr;
+};
+
+/* GRF_GPIO1D_IOMUX */
+enum {
+	GPIO1D3_SHIFT		= 6,
+	GPIO1D3_MASK		= 1,
+	GPIO1D3_GPIO		= 0,
+	GPIO1D3_LCDC0_DCLK,
+
+	GPIO1D2_SHIFT		= 4,
+	GPIO1D2_MASK		= 1,
+	GPIO1D2_GPIO		= 0,
+	GPIO1D2_LCDC0_DEN,
+
+	GPIO1D1_SHIFT		= 2,
+	GPIO1D1_MASK		= 1,
+	GPIO1D1_GPIO		= 0,
+	GPIO1D1_LCDC0_VSYNC,
+
+	GPIO1D0_SHIFT		= 0,
+	GPIO1D0_MASK		= 1,
+	GPIO1D0_GPIO		= 0,
+	GPIO1D0_LCDC0_HSYNC,
+};
+
+/* GRF_GPIO2C_IOMUX */
+enum {
+	GPIO2C1_SHIFT		= 2,
+	GPIO2C1_MASK		= 1,
+	GPIO2C1_GPIO		= 0,
+	GPIO2C1_I2C3CAM_SDA,
+
+	GPIO2C0_SHIFT		= 0,
+	GPIO2C0_MASK		= 1,
+	GPIO2C0_GPIO		= 0,
+	GPIO2C0_I2C3CAM_SCL,
+};
+
+/* GRF_GPIO3A_IOMUX */
+enum {
+	GPIO3A7_SHIFT		= 14,
+	GPIO3A7_MASK		= 3,
+	GPIO3A7_GPIO		= 0,
+	GPIO3A7_FLASH0_DATA7,
+	GPIO3A7_EMMC_DATA7,
+
+	GPIO3A6_SHIFT		= 12,
+	GPIO3A6_MASK		= 3,
+	GPIO3A6_GPIO		= 0,
+	GPIO3A6_FLASH0_DATA6,
+	GPIO3A6_EMMC_DATA6,
+
+	GPIO3A5_SHIFT		= 10,
+	GPIO3A5_MASK		= 3,
+	GPIO3A5_GPIO		= 0,
+	GPIO3A5_FLASH0_DATA5,
+	GPIO3A5_EMMC_DATA5,
+
+	GPIO3A4_SHIFT		= 8,
+	GPIO3A4_MASK		= 3,
+	GPIO3A4_GPIO		= 0,
+	GPIO3A4_FLASH0_DATA4,
+	GPIO3A4_EMMC_DATA4,
+
+	GPIO3A3_SHIFT		= 6,
+	GPIO3A3_MASK		= 3,
+	GPIO3A3_GPIO		= 0,
+	GPIO3A3_FLASH0_DATA3,
+	GPIO3A3_EMMC_DATA3,
+
+	GPIO3A2_SHIFT		= 4,
+	GPIO3A2_MASK		= 3,
+	GPIO3A2_GPIO		= 0,
+	GPIO3A2_FLASH0_DATA2,
+	GPIO3A2_EMMC_DATA2,
+
+	GPIO3A1_SHIFT		= 2,
+	GPIO3A1_MASK		= 3,
+	GPIO3A1_GPIO		= 0,
+	GPIO3A1_FLASH0_DATA1,
+	GPIO3A1_EMMC_DATA1,
+
+	GPIO3A0_SHIFT		= 0,
+	GPIO3A0_MASK		= 3,
+	GPIO3A0_GPIO		= 0,
+	GPIO3A0_FLASH0_DATA0,
+	GPIO3A0_EMMC_DATA0,
+};
+
+/* GRF_GPIO3B_IOMUX */
+enum {
+	GPIO3B7_SHIFT		= 14,
+	GPIO3B7_MASK		= 1,
+	GPIO3B7_GPIO		= 0,
+	GPIO3B7_FLASH0_CSN1,
+
+	GPIO3B6_SHIFT		= 12,
+	GPIO3B6_MASK		= 1,
+	GPIO3B6_GPIO		= 0,
+	GPIO3B6_FLASH0_CSN0,
+
+	GPIO3B5_SHIFT		= 10,
+	GPIO3B5_MASK		= 1,
+	GPIO3B5_GPIO		= 0,
+	GPIO3B5_FLASH0_WRN,
+
+	GPIO3B4_SHIFT		= 8,
+	GPIO3B4_MASK		= 1,
+	GPIO3B4_GPIO		= 0,
+	GPIO3B4_FLASH0_CLE,
+
+	GPIO3B3_SHIFT		= 6,
+	GPIO3B3_MASK		= 1,
+	GPIO3B3_GPIO		= 0,
+	GPIO3B3_FLASH0_ALE,
+
+	GPIO3B2_SHIFT		= 4,
+	GPIO3B2_MASK		= 1,
+	GPIO3B2_GPIO		= 0,
+	GPIO3B2_FLASH0_RDN,
+
+	GPIO3B1_SHIFT		= 2,
+	GPIO3B1_MASK		= 3,
+	GPIO3B1_GPIO		= 0,
+	GPIO3B1_FLASH0_WP,
+	GPIO3B1_EMMC_PWREN,
+
+	GPIO3B0_SHIFT		= 0,
+	GPIO3B0_MASK		= 1,
+	GPIO3B0_GPIO		= 0,
+	GPIO3B0_FLASH0_RDY,
+};
+
+/* GRF_GPIO3C_IOMUX */
+enum {
+	GPIO3C2_SHIFT		= 4,
+	GPIO3C2_MASK		= 3,
+	GPIO3C2_GPIO		= 0,
+	GPIO3C2_FLASH0_DQS,
+	GPIO3C2_EMMC_CLKOUT,
+
+	GPIO3C1_SHIFT		= 2,
+	GPIO3C1_MASK		= 3,
+	GPIO3C1_GPIO		= 0,
+	GPIO3C1_FLASH0_CSN3,
+	GPIO3C1_EMMC_RSTNOUT,
+
+	GPIO3C0_SHIFT		= 0,
+	GPIO3C0_MASK		= 3,
+	GPIO3C0_GPIO		= 0,
+	GPIO3C0_FLASH0_CSN2,
+	GPIO3C0_EMMC_CMD,
+};
+
+/* GRF_GPIO3DL_IOMUX */
+enum {
+	GPIO3D3_SHIFT		= 12,
+	GPIO3D3_MASK		= 7,
+	GPIO3D3_GPIO		= 0,
+	GPIO3D3_FLASH1_DATA3,
+	GPIO3D3_HOST_DOUT3,
+	GPIO3D3_MAC_RXD3,
+	GPIO3D3_SDIO1_DATA3,
+
+	GPIO3D2_SHIFT		= 8,
+	GPIO3D2_MASK		= 7,
+	GPIO3D2_GPIO		= 0,
+	GPIO3D2_FLASH1_DATA2,
+	GPIO3D2_HOST_DOUT2,
+	GPIO3D2_MAC_RXD2,
+	GPIO3D2_SDIO1_DATA2,
+
+	GPIO3D1_SHIFT		= 4,
+	GPIO3D1_MASK		= 7,
+	GPIO3D1_GPIO		= 0,
+	GPIO3DL1_FLASH1_DATA1,
+	GPIO3D1_HOST_DOUT1,
+	GPIO3D1_MAC_TXD3,
+	GPIO3D1_SDIO1_DATA1,
+
+	GPIO3D0_SHIFT		= 0,
+	GPIO3D0_MASK		= 7,
+	GPIO3D0_GPIO		= 0,
+	GPIO3D0_FLASH1_DATA0,
+	GPIO3D0_HOST_DOUT0,
+	GPIO3D0_MAC_TXD2,
+	GPIO3D0_SDIO1_DATA0,
+};
+
+/* GRF_GPIO3HL_IOMUX */
+enum {
+	GPIO3D7_SHIFT		= 12,
+	GPIO3D7_MASK		= 7,
+	GPIO3D7_GPIO		= 0,
+	GPIO3D7_FLASH1_DATA7,
+	GPIO3D7_HOST_DOUT7,
+	GPIO3D7_MAC_RXD1,
+	GPIO3D7_SDIO1_INTN,
+
+	GPIO3D6_SHIFT		= 8,
+	GPIO3D6_MASK		= 7,
+	GPIO3D6_GPIO		= 0,
+	GPIO3D6_FLASH1_DATA6,
+	GPIO3D6_HOST_DOUT6,
+	GPIO3D6_MAC_RXD0,
+	GPIO3D6_SDIO1_BKPWR,
+
+	GPIO3D5_SHIFT		= 4,
+	GPIO3D5_MASK		= 7,
+	GPIO3D5_GPIO		= 0,
+	GPIO3D5_FLASH1_DATA5,
+	GPIO3D5_HOST_DOUT5,
+	GPIO3D5_MAC_TXD1,
+	GPIO3D5_SDIO1_WRPRT,
+
+	GPIO3D4_SHIFT		= 0,
+	GPIO3D4_MASK		= 7,
+	GPIO3D4_GPIO		= 0,
+	GPIO3D4_FLASH1_DATA4,
+	GPIO3D4_HOST_DOUT4,
+	GPIO3D4_MAC_TXD0,
+	GPIO3D4_SDIO1_DETECTN,
+};
+
+/* GRF_GPIO4AL_IOMUX */
+enum {
+	GPIO4A3_SHIFT		= 12,
+	GPIO4A3_MASK		= 7,
+	GPIO4A3_GPIO		= 0,
+	GPIO4A3_FLASH1_ALE,
+	GPIO4A3_HOST_DOUT9,
+	GPIO4A3_MAC_CLK,
+	GPIO4A3_FLASH0_CSN6,
+
+	GPIO4A2_SHIFT		= 8,
+	GPIO4A2_MASK		= 7,
+	GPIO4A2_GPIO		= 0,
+	GPIO4A2_FLASH1_RDN,
+	GPIO4A2_HOST_DOUT8,
+	GPIO4A2_MAC_RXER,
+	GPIO4A2_FLASH0_CSN5,
+
+	GPIO4A1_SHIFT		= 4,
+	GPIO4A1_MASK		= 7,
+	GPIO4A1_GPIO		= 0,
+	GPIO4A1_FLASH1_WP,
+	GPIO4A1_HOST_CKOUTN,
+	GPIO4A1_MAC_TXDV,
+	GPIO4A1_FLASH0_CSN4,
+
+	GPIO4A0_SHIFT		= 0,
+	GPIO4A0_MASK		= 3,
+	GPIO4A0_GPIO		= 0,
+	GPIO4A0_FLASH1_RDY,
+	GPIO4A0_HOST_CKOUTP,
+	GPIO4A0_MAC_MDC,
+};
+
+/* GRF_GPIO4AH_IOMUX */
+enum {
+	GPIO4A7_SHIFT		= 12,
+	GPIO4A7_MASK		= 7,
+	GPIO4A7_GPIO		= 0,
+	GPIO4A7_FLASH1_CSN1,
+	GPIO4A7_HOST_DOUT13,
+	GPIO4A7_MAC_CSR,
+	GPIO4A7_SDIO1_CLKOUT,
+
+	GPIO4A6_SHIFT		= 8,
+	GPIO4A6_MASK		= 7,
+	GPIO4A6_GPIO		= 0,
+	GPIO4A6_FLASH1_CSN0,
+	GPIO4A6_HOST_DOUT12,
+	GPIO4A6_MAC_RXCLK,
+	GPIO4A6_SDIO1_CMD,
+
+	GPIO4A5_SHIFT		= 4,
+	GPIO4A5_MASK		= 3,
+	GPIO4A5_GPIO		= 0,
+	GPIO4A5_FLASH1_WRN,
+	GPIO4A5_HOST_DOUT11,
+	GPIO4A5_MAC_MDIO,
+
+	GPIO4A4_SHIFT		= 0,
+	GPIO4A4_MASK		= 7,
+	GPIO4A4_GPIO		= 0,
+	GPIO4A4_FLASH1_CLE,
+	GPIO4A4_HOST_DOUT10,
+	GPIO4A4_MAC_TXEN,
+	GPIO4A4_FLASH0_CSN7,
+};
+
+/* GRF_GPIO4BL_IOMUX */
+enum {
+	GPIO4B1_SHIFT		= 4,
+	GPIO4B1_MASK		= 7,
+	GPIO4B1_GPIO		= 0,
+	GPIO4B1_FLASH1_CSN2,
+	GPIO4B1_HOST_DOUT15,
+	GPIO4B1_MAC_TXCLK,
+	GPIO4B1_SDIO1_PWREN,
+
+	GPIO4B0_SHIFT		= 0,
+	GPIO4B0_MASK		= 7,
+	GPIO4B0_GPIO		= 0,
+	GPIO4B0_FLASH1_DQS,
+	GPIO4B0_HOST_DOUT14,
+	GPIO4B0_MAC_COL,
+	GPIO4B0_FLASH1_CSN3,
+};
+
+/* GRF_GPIO4C_IOMUX */
+enum {
+	GPIO4C7_SHIFT		= 14,
+	GPIO4C7_MASK		= 1,
+	GPIO4C7_GPIO		= 0,
+	GPIO4C7_SDIO0_DATA3,
+
+	GPIO4C6_SHIFT		= 12,
+	GPIO4C6_MASK		= 1,
+	GPIO4C6_GPIO		= 0,
+	GPIO4C6_SDIO0_DATA2,
+
+	GPIO4C5_SHIFT		= 10,
+	GPIO4C5_MASK		= 1,
+	GPIO4C5_GPIO		= 0,
+	GPIO4C5_SDIO0_DATA1,
+
+	GPIO4C4_SHIFT		= 8,
+	GPIO4C4_MASK		= 1,
+	GPIO4C4_GPIO		= 0,
+	GPIO4C4_SDIO0_DATA0,
+
+	GPIO4C3_SHIFT		= 6,
+	GPIO4C3_MASK		= 1,
+	GPIO4C3_GPIO		= 0,
+	GPIO4C3_UART0BT_RTSN,
+
+	GPIO4C2_SHIFT		= 4,
+	GPIO4C2_MASK		= 1,
+	GPIO4C2_GPIO		= 0,
+	GPIO4C2_UART0BT_CTSN,
+
+	GPIO4C1_SHIFT		= 2,
+	GPIO4C1_MASK		= 1,
+	GPIO4C1_GPIO		= 0,
+	GPIO4C1_UART0BT_SOUT,
+
+	GPIO4C0_SHIFT		= 0,
+	GPIO4C0_MASK		= 1,
+	GPIO4C0_GPIO		= 0,
+	GPIO4C0_UART0BT_SIN,
+};
+
+/* GRF_GPIO5B_IOMUX */
+enum {
+	GPIO5B7_SHIFT		= 14,
+	GPIO5B7_MASK		= 3,
+	GPIO5B7_GPIO		= 0,
+	GPIO5B7_SPI0_RXD,
+	GPIO5B7_TS0_DATA7,
+	GPIO5B7_UART4EXP_SIN,
+
+	GPIO5B6_SHIFT		= 12,
+	GPIO5B6_MASK		= 3,
+	GPIO5B6_GPIO		= 0,
+	GPIO5B6_SPI0_TXD,
+	GPIO5B6_TS0_DATA6,
+	GPIO5B6_UART4EXP_SOUT,
+
+	GPIO5B5_SHIFT		= 10,
+	GPIO5B5_MASK		= 3,
+	GPIO5B5_GPIO		= 0,
+	GPIO5B5_SPI0_CSN0,
+	GPIO5B5_TS0_DATA5,
+	GPIO5B5_UART4EXP_RTSN,
+
+	GPIO5B4_SHIFT		= 8,
+	GPIO5B4_MASK		= 3,
+	GPIO5B4_GPIO		= 0,
+	GPIO5B4_SPI0_CLK,
+	GPIO5B4_TS0_DATA4,
+	GPIO5B4_UART4EXP_CTSN,
+
+	GPIO5B3_SHIFT		= 6,
+	GPIO5B3_MASK		= 3,
+	GPIO5B3_GPIO		= 0,
+	GPIO5B3_UART1BB_RTSN,
+	GPIO5B3_TS0_DATA3,
+
+	GPIO5B2_SHIFT		= 4,
+	GPIO5B2_MASK		= 3,
+	GPIO5B2_GPIO		= 0,
+	GPIO5B2_UART1BB_CTSN,
+	GPIO5B2_TS0_DATA2,
+
+	GPIO5B1_SHIFT		= 2,
+	GPIO5B1_MASK		= 3,
+	GPIO5B1_GPIO		= 0,
+	GPIO5B1_UART1BB_SOUT,
+	GPIO5B1_TS0_DATA1,
+
+	GPIO5B0_SHIFT		= 0,
+	GPIO5B0_MASK		= 3,
+	GPIO5B0_GPIO		= 0,
+	GPIO5B0_UART1BB_SIN,
+	GPIO5B0_TS0_DATA0,
+};
+
+/* GRF_GPIO5C_IOMUX */
+enum {
+	GPIO5C3_SHIFT		= 6,
+	GPIO5C3_MASK		= 1,
+	GPIO5C3_GPIO		= 0,
+	GPIO5C3_TS0_ERR,
+
+	GPIO5C2_SHIFT		= 4,
+	GPIO5C2_MASK		= 1,
+	GPIO5C2_GPIO		= 0,
+	GPIO5C2_TS0_CLK,
+
+	GPIO5C1_SHIFT		= 2,
+	GPIO5C1_MASK		= 1,
+	GPIO5C1_GPIO		= 0,
+	GPIO5C1_TS0_VALID,
+
+	GPIO5C0_SHIFT		= 0,
+	GPIO5C0_MASK		= 3,
+	GPIO5C0_GPIO		= 0,
+	GPIO5C0_SPI0_CSN1,
+	GPIO5C0_TS0_SYNC,
+};
+
+/* GRF_GPIO6A_IOMUX */
+enum {
+	GPIO6A7_SHIFT		= 0xe,
+	GPIO6A7_MASK		= 1,
+	GPIO6A7_GPIO		= 0,
+	GPIO6A7_I2S_SDO3,
+
+	GPIO6A6_SHIFT		= 0xc,
+	GPIO6A6_MASK		= 1,
+	GPIO6A6_GPIO		= 0,
+	GPIO6A6_I2S_SDO2,
+
+	GPIO6A5_SHIFT		= 0xa,
+	GPIO6A5_MASK		= 1,
+	GPIO6A5_GPIO		= 0,
+	GPIO6A5_I2S_SDO1,
+
+	GPIO6A4_SHIFT		= 8,
+	GPIO6A4_MASK		= 1,
+	GPIO6A4_GPIO		= 0,
+	GPIO6A4_I2S_SDO0,
+
+	GPIO6A3_SHIFT		= 6,
+	GPIO6A3_MASK		= 1,
+	GPIO6A3_GPIO		= 0,
+	GPIO6A3_I2S_SDI,
+
+	GPIO6A2_SHIFT		= 4,
+	GPIO6A2_MASK		= 1,
+	GPIO6A2_GPIO		= 0,
+	GPIO6A2_I2S_LRCKTX,
+
+	GPIO6A1_SHIFT		= 2,
+	GPIO6A1_MASK		= 1,
+	GPIO6A1_GPIO		= 0,
+	GPIO6A1_I2S_LRCKRX,
+
+	GPIO6A0_SHIFT		= 0,
+	GPIO6A0_MASK		= 1,
+	GPIO6A0_GPIO		= 0,
+	GPIO6A0_I2S_SCLK,
+};
+
+/* GRF_GPIO6B_IOMUX */
+enum {
+	GPIO6B3_SHIFT		= 6,
+	GPIO6B3_MASK		= 1,
+	GPIO6B3_GPIO		= 0,
+	GPIO6B3_SPDIF_TX,
+
+	GPIO6B2_SHIFT		= 4,
+	GPIO6B2_MASK		= 1,
+	GPIO6B2_GPIO		= 0,
+	GPIO6B2_I2C1AUDIO_SCL,
+
+	GPIO6B1_SHIFT		= 2,
+	GPIO6B1_MASK		= 1,
+	GPIO6B1_GPIO		= 0,
+	GPIO6B1_I2C1AUDIO_SDA,
+
+	GPIO6B0_SHIFT		= 0,
+	GPIO6B0_MASK		= 1,
+	GPIO6B0_GPIO		= 0,
+	GPIO6B0_I2S_CLK,
+};
+
+/* GRF_GPIO6C_IOMUX */
+enum {
+	GPIO6C6_SHIFT		= 12,
+	GPIO6C6_MASK		= 1,
+	GPIO6C6_GPIO		= 0,
+	GPIO6C6_SDMMC0_DECTN,
+
+	GPIO6C5_SHIFT		= 10,
+	GPIO6C5_MASK		= 1,
+	GPIO6C5_GPIO		= 0,
+	GPIO6C5_SDMMC0_CMD,
+
+	GPIO6C4_SHIFT		= 8,
+	GPIO6C4_MASK		= 3,
+	GPIO6C4_GPIO		= 0,
+	GPIO6C4_SDMMC0_CLKOUT,
+	GPIO6C4_JTAG_TDO,
+
+	GPIO6C3_SHIFT		= 6,
+	GPIO6C3_MASK		= 3,
+	GPIO6C3_GPIO		= 0,
+	GPIO6C3_SDMMC0_DATA3,
+	GPIO6C3_JTAG_TCK,
+
+	GPIO6C2_SHIFT		= 4,
+	GPIO6C2_MASK		= 3,
+	GPIO6C2_GPIO		= 0,
+	GPIO6C2_SDMMC0_DATA2,
+	GPIO6C2_JTAG_TDI,
+
+	GPIO6C1_SHIFT		= 2,
+	GPIO6C1_MASK		= 3,
+	GPIO6C1_GPIO		= 0,
+	GPIO6C1_SDMMC0_DATA1,
+	GPIO6C1_JTAG_TRSTN,
+
+	GPIO6C0_SHIFT		= 0,
+	GPIO6C0_MASK		= 3,
+	GPIO6C0_GPIO		= 0,
+	GPIO6C0_SDMMC0_DATA0,
+	GPIO6C0_JTAG_TMS,
+};
+
+/* GRF_GPIO7A_IOMUX */
+enum {
+	GPIO7A7_SHIFT		= 14,
+	GPIO7A7_MASK		= 3,
+	GPIO7A7_GPIO		= 0,
+	GPIO7A7_UART3GPS_SIN,
+	GPIO7A7_GPS_MAG,
+	GPIO7A7_HSADCT1_DATA0,
+
+	GPIO7A1_SHIFT		= 2,
+	GPIO7A1_MASK		= 1,
+	GPIO7A1_GPIO		= 0,
+	GPIO7A1_PWM_1,
+
+	GPIO7A0_SHIFT		= 0,
+	GPIO7A0_MASK		= 3,
+	GPIO7A0_GPIO		= 0,
+	GPIO7A0_PWM_0,
+	GPIO7A0_VOP0_PWM,
+	GPIO7A0_VOP1_PWM,
+};
+
+/* GRF_GPIO7B_IOMUX */
+enum {
+	GPIO7B7_SHIFT		= 14,
+	GPIO7B7_MASK		= 3,
+	GPIO7B7_GPIO		= 0,
+	GPIO7B7_ISP_SHUTTERTRIG,
+	GPIO7B7_SPI1_TXD,
+
+	GPIO7B6_SHIFT		= 12,
+	GPIO7B6_MASK		= 3,
+	GPIO7B6_GPIO		= 0,
+	GPIO7B6_ISP_PRELIGHTTRIG,
+	GPIO7B6_SPI1_RXD,
+
+	GPIO7B5_SHIFT		= 10,
+	GPIO7B5_MASK		= 3,
+	GPIO7B5_GPIO		= 0,
+	GPIO7B5_ISP_FLASHTRIGOUT,
+	GPIO7B5_SPI1_CSN0,
+
+	GPIO7B4_SHIFT		= 8,
+	GPIO7B4_MASK		= 3,
+	GPIO7B4_GPIO		= 0,
+	GPIO7B4_ISP_SHUTTEREN,
+	GPIO7B4_SPI1_CLK,
+
+	GPIO7B3_SHIFT		= 6,
+	GPIO7B3_MASK		= 3,
+	GPIO7B3_GPIO		= 0,
+	GPIO7B3_USB_DRVVBUS1,
+	GPIO7B3_EDP_HOTPLUG,
+
+	GPIO7B2_SHIFT		= 4,
+	GPIO7B2_MASK		= 3,
+	GPIO7B2_GPIO		= 0,
+	GPIO7B2_UART3GPS_RTSN,
+	GPIO7B2_USB_DRVVBUS0,
+
+	GPIO7B1_SHIFT		= 2,
+	GPIO7B1_MASK		= 3,
+	GPIO7B1_GPIO		= 0,
+	GPIO7B1_UART3GPS_CTSN,
+	GPIO7B1_GPS_RFCLK,
+	GPIO7B1_GPST1_CLK,
+
+	GPIO7B0_SHIFT		= 0,
+	GPIO7B0_MASK		= 3,
+	GPIO7B0_GPIO		= 0,
+	GPIO7B0_UART3GPS_SOUT,
+	GPIO7B0_GPS_SIG,
+	GPIO7B0_HSADCT1_DATA1,
+};
+
+/* GRF_GPIO7CL_IOMUX */
+enum {
+	GPIO7C3_SHIFT		= 12,
+	GPIO7C3_MASK		= 3,
+	GPIO7C3_GPIO		= 0,
+	GPIO7C3_I2C5HDMI_SDA,
+	GPIO7C3_EDPHDMII2C_SDA,
+
+	GPIO7C2_SHIFT		= 8,
+	GPIO7C2_MASK		= 1,
+	GPIO7C2_GPIO		= 0,
+	GPIO7C2_I2C4TP_SCL,
+
+	GPIO7C1_SHIFT		= 4,
+	GPIO7C1_MASK		= 1,
+	GPIO7C1_GPIO		= 0,
+	GPIO7C1_I2C4TP_SDA,
+
+	GPIO7C0_SHIFT		= 0,
+	GPIO7C0_MASK		= 3,
+	GPIO7C0_GPIO		= 0,
+	GPIO7C0_ISP_FLASHTRIGIN,
+	GPIO7C0_EDPHDMI_CECINOUTT1,
+};
+
+/* GRF_GPIO7CH_IOMUX */
+enum {
+	GPIO7C7_SHIFT		= 12,
+	GPIO7C7_MASK		= 7,
+	GPIO7C7_GPIO		= 0,
+	GPIO7C7_UART2DBG_SOUT,
+	GPIO7C7_UART2DBG_SIROUT,
+	GPIO7C7_PWM_3,
+	GPIO7C7_EDPHDMI_CECINOUT,
+
+	GPIO7C6_SHIFT		= 8,
+	GPIO7C6_MASK		= 3,
+	GPIO7C6_GPIO		= 0,
+	GPIO7C6_UART2DBG_SIN,
+	GPIO7C6_UART2DBG_SIRIN,
+	GPIO7C6_PWM_2,
+
+	GPIO7C4_SHIFT		= 0,
+	GPIO7C4_MASK		= 3,
+	GPIO7C4_GPIO		= 0,
+	GPIO7C4_I2C5HDMI_SCL,
+	GPIO7C4_EDPHDMII2C_SCL,
+};
+
+/* GRF_GPIO8A_IOMUX */
+enum {
+	GPIO8A7_SHIFT		= 14,
+	GPIO8A7_MASK		= 3,
+	GPIO8A7_GPIO		= 0,
+	GPIO8A7_SPI2_CSN0,
+	GPIO8A7_SC_DETECT,
+	GPIO8A7_RESERVE,
+
+	GPIO8A6_SHIFT		= 12,
+	GPIO8A6_MASK		= 3,
+	GPIO8A6_GPIO		= 0,
+	GPIO8A6_SPI2_CLK,
+	GPIO8A6_SC_IO,
+	GPIO8A6_RESERVE,
+
+	GPIO8A5_SHIFT		= 10,
+	GPIO8A5_MASK		= 3,
+	GPIO8A5_GPIO		= 0,
+	GPIO8A5_I2C2SENSOR_SCL,
+	GPIO8A5_SC_CLK,
+
+	GPIO8A4_SHIFT		= 8,
+	GPIO8A4_MASK		= 3,
+	GPIO8A4_GPIO		= 0,
+	GPIO8A4_I2C2SENSOR_SDA,
+	GPIO8A4_SC_RST,
+
+	GPIO8A3_SHIFT		= 6,
+	GPIO8A3_MASK		= 3,
+	GPIO8A3_GPIO		= 0,
+	GPIO8A3_SPI2_CSN1,
+	GPIO8A3_SC_IOT1,
+
+	GPIO8A2_SHIFT		= 4,
+	GPIO8A2_MASK		= 1,
+	GPIO8A2_GPIO		= 0,
+	GPIO8A2_SC_DETECTT1,
+
+	GPIO8A1_SHIFT		= 2,
+	GPIO8A1_MASK		= 3,
+	GPIO8A1_GPIO		= 0,
+	GPIO8A1_PS2_DATA,
+	GPIO8A1_SC_VCC33V,
+
+	GPIO8A0_SHIFT		= 0,
+	GPIO8A0_MASK		= 3,
+	GPIO8A0_GPIO		= 0,
+	GPIO8A0_PS2_CLK,
+	GPIO8A0_SC_VCC18V,
+};
+
+/* GRF_GPIO8B_IOMUX */
+enum {
+	GPIO8B1_SHIFT		= 2,
+	GPIO8B1_MASK		= 3,
+	GPIO8B1_GPIO		= 0,
+	GPIO8B1_SPI2_TXD,
+	GPIO8B1_SC_CLK,
+
+	GPIO8B0_SHIFT		= 0,
+	GPIO8B0_MASK		= 3,
+	GPIO8B0_GPIO		= 0,
+	GPIO8B0_SPI2_RXD,
+	GPIO8B0_SC_RST,
+};
+
+/* GRF_SOC_CON0 */
+enum {
+	PAUSE_MMC_PERI_SHIFT	= 0xf,
+	PAUSE_MMC_PERI_MASK	= 1,
+
+	PAUSE_EMEM_PERI_SHIFT	= 0xe,
+	PAUSE_EMEM_PERI_MASK	= 1,
+
+	PAUSE_USB_PERI_SHIFT	= 0xd,
+	PAUSE_USB_PERI_MASK	= 1,
+
+	GRF_FORCE_JTAG_SHIFT	= 0xc,
+	GRF_FORCE_JTAG_MASK	= 1,
+
+	GRF_CORE_IDLE_REQ_MODE_SEL1_SHIFT = 0xb,
+	GRF_CORE_IDLE_REQ_MODE_SEL1_MASK = 1,
+
+	GRF_CORE_IDLE_REQ_MODE_SEL0_SHIFT = 0xa,
+	GRF_CORE_IDLE_REQ_MODE_SEL0_MASK = 1,
+
+	DDR1_16BIT_EN_SHIFT	= 9,
+	DDR1_16BIT_EN_MASK	= 1,
+
+	DDR0_16BIT_EN_SHIFT	= 8,
+	DDR0_16BIT_EN_MASK	= 1,
+
+	VCODEC_SHIFT		= 7,
+	VCODEC_MASK		= 1,
+	VCODEC_SELECT_VEPU_ACLK	= 0,
+	VCODEC_SELECT_VDPU_ACLK,
+
+	UPCTL1_C_ACTIVE_IN_SHIFT = 6,
+	UPCTL1_C_ACTIVE_IN_MASK	= 1,
+	UPCTL1_C_ACTIVE_IN_MAY	= 0,
+	UPCTL1_C_ACTIVE_IN_WILL,
+
+	UPCTL0_C_ACTIVE_IN_SHIFT = 5,
+	UPCTL0_C_ACTIVE_IN_MASK	= 1,
+	UPCTL0_C_ACTIVE_IN_MAY	= 0,
+	UPCTL0_C_ACTIVE_IN_WILL,
+
+	MSCH1_MAINDDR3_SHIFT	= 4,
+	MSCH1_MAINDDR3_MASK	= 1,
+	MSCH1_MAINDDR3_DDR3	= 1,
+
+	MSCH0_MAINDDR3_SHIFT	= 3,
+	MSCH0_MAINDDR3_MASK	= 1,
+	MSCH0_MAINDDR3_DDR3	= 1,
+
+	MSCH1_MAINPARTIALPOP_SHIFT = 2,
+	MSCH1_MAINPARTIALPOP_MASK = 1,
+
+	MSCH0_MAINPARTIALPOP_SHIFT = 1,
+	MSCH0_MAINPARTIALPOP_MASK = 1,
+};
+
+/* GRF_SOC_CON1 */
+enum {
+	RK3288_RMII_MODE_SHIFT = 14,
+	RK3288_RMII_MODE_MASK  = (1 << RK3288_RMII_MODE_SHIFT),
+	RK3288_RMII_MODE       = (1 << RK3288_RMII_MODE_SHIFT),
+
+	RK3288_GMAC_CLK_SEL_SHIFT = 12,
+	RK3288_GMAC_CLK_SEL_MASK  = (3 << RK3288_GMAC_CLK_SEL_SHIFT),
+	RK3288_GMAC_CLK_SEL_125M  = (0 << RK3288_GMAC_CLK_SEL_SHIFT),
+	RK3288_GMAC_CLK_SEL_25M   = (3 << RK3288_GMAC_CLK_SEL_SHIFT),
+	RK3288_GMAC_CLK_SEL_2_5M  = (2 << RK3288_GMAC_CLK_SEL_SHIFT),
+
+	RK3288_RMII_CLK_SEL_SHIFT = 11,
+	RK3288_RMII_CLK_SEL_MASK  = (1 << RK3288_RMII_CLK_SEL_SHIFT),
+	RK3288_RMII_CLK_SEL_2_5M  = (0 << RK3288_RMII_CLK_SEL_SHIFT),
+	RK3288_RMII_CLK_SEL_25M   = (1 << RK3288_RMII_CLK_SEL_SHIFT),
+
+	GMAC_SPEED_SHIFT	= 0xa,
+	GMAC_SPEED_MASK		= 1,
+	GMAC_SPEED_10M		= 0,
+	GMAC_SPEED_100M,
+
+	GMAC_FLOWCTRL_SHIFT	= 0x9,
+	GMAC_FLOWCTRL_MASK	= 1,
+
+	RK3288_GMAC_PHY_INTF_SEL_SHIFT = 6,
+	RK3288_GMAC_PHY_INTF_SEL_MASK  = (7 << RK3288_GMAC_PHY_INTF_SEL_SHIFT),
+	RK3288_GMAC_PHY_INTF_SEL_RGMII = (1 << RK3288_GMAC_PHY_INTF_SEL_SHIFT),
+	RK3288_GMAC_PHY_INTF_SEL_RMII  = (4 << RK3288_GMAC_PHY_INTF_SEL_SHIFT),
+
+	HOST_REMAP_SHIFT	= 0x5,
+	HOST_REMAP_MASK		= 1
+};
+
+/* GRF_SOC_CON2 */
+enum {
+	UPCTL1_LPDDR3_ODT_EN_SHIFT = 0xd,
+	UPCTL1_LPDDR3_ODT_EN_MASK = 1,
+	UPCTL1_LPDDR3_ODT_EN_ODT = 1,
+
+	UPCTL1_BST_DIABLE_SHIFT	= 0xc,
+	UPCTL1_BST_DIABLE_MASK	= 1,
+	UPCTL1_BST_DIABLE_DISABLE = 1,
+
+	LPDDR3_EN1_SHIFT	= 0xb,
+	LPDDR3_EN1_MASK		= 1,
+	LPDDR3_EN1_LPDDR3	= 1,
+
+	UPCTL0_LPDDR3_ODT_EN_SHIFT = 0xa,
+	UPCTL0_LPDDR3_ODT_EN_MASK = 1,
+	UPCTL0_LPDDR3_ODT_EN_ODT_ENABLE = 1,
+
+	UPCTL0_BST_DIABLE_SHIFT	= 9,
+	UPCTL0_BST_DIABLE_MASK	= 1,
+	UPCTL0_BST_DIABLE_DISABLE = 1,
+
+	LPDDR3_EN0_SHIFT	= 8,
+	LPDDR3_EN0_MASK		= 1,
+	LPDDR3_EN0_LPDDR3	= 1,
+
+	GRF_POC_FLASH0_CTRL_SHIFT = 7,
+	GRF_POC_FLASH0_CTRL_MASK = 1,
+	GRF_POC_FLASH0_CTRL_GPIO3C_3 = 0,
+	GRF_POC_FLASH0_CTRL_GRF_IO_VSEL,
+
+	SIMCARD_MUX_SHIFT	= 6,
+	SIMCARD_MUX_MASK	= 1,
+	SIMCARD_MUX_USE_A	= 1,
+	SIMCARD_MUX_USE_B	= 0,
+
+	GRF_SPDIF_2CH_EN_SHIFT	= 1,
+	GRF_SPDIF_2CH_EN_MASK	= 1,
+	GRF_SPDIF_2CH_EN_8CH	= 0,
+	GRF_SPDIF_2CH_EN_2CH,
+
+	PWM_SHIFT		= 0,
+	PWM_MASK		= 1,
+	PWM_RK			= 1,
+	PWM_PWM			= 0,
+};
+
+/* GRF_SOC_CON3 */
+enum {
+	RK3288_RXCLK_DLY_ENA_GMAC_SHIFT = 0xf,
+	RK3288_RXCLK_DLY_ENA_GMAC_MASK =
+		(1 << RK3288_RXCLK_DLY_ENA_GMAC_SHIFT),
+	RK3288_RXCLK_DLY_ENA_GMAC_DISABLE = 0,
+	RK3288_RXCLK_DLY_ENA_GMAC_ENABLE =
+		(1 << RK3288_RXCLK_DLY_ENA_GMAC_SHIFT),
+
+	RK3288_TXCLK_DLY_ENA_GMAC_SHIFT = 0xe,
+	RK3288_TXCLK_DLY_ENA_GMAC_MASK =
+		(1 << RK3288_TXCLK_DLY_ENA_GMAC_SHIFT),
+	RK3288_TXCLK_DLY_ENA_GMAC_DISABLE = 0,
+	RK3288_TXCLK_DLY_ENA_GMAC_ENABLE =
+		(1 << RK3288_TXCLK_DLY_ENA_GMAC_SHIFT),
+
+	RK3288_CLK_RX_DL_CFG_GMAC_SHIFT = 0x7,
+	RK3288_CLK_RX_DL_CFG_GMAC_MASK =
+		(0x7f << RK3288_CLK_RX_DL_CFG_GMAC_SHIFT),
+
+	RK3288_CLK_TX_DL_CFG_GMAC_SHIFT = 0x0,
+	RK3288_CLK_TX_DL_CFG_GMAC_MASK =
+		(0x7f << RK3288_CLK_TX_DL_CFG_GMAC_SHIFT),
+};
+
+/* GRF_SOC_CON6 */
+enum GRF_SOC_CON6 {
+	RK3288_HDMI_EDP_SEL_SHIFT = 0xf,
+	RK3288_HDMI_EDP_SEL_MASK =
+		1 << RK3288_HDMI_EDP_SEL_SHIFT,
+	RK3288_HDMI_EDP_SEL_EDP = 0,
+	RK3288_HDMI_EDP_SEL_HDMI,
+
+	RK3288_DSI0_DPICOLORM_SHIFT = 0x8,
+	RK3288_DSI0_DPICOLORM_MASK =
+		1 << RK3288_DSI0_DPICOLORM_SHIFT,
+
+	RK3288_DSI0_DPISHUTDN_SHIFT = 0x7,
+	RK3288_DSI0_DPISHUTDN_MASK =
+		1 << RK3288_DSI0_DPISHUTDN_SHIFT,
+
+	RK3288_DSI0_LCDC_SEL_SHIFT = 0x6,
+	RK3288_DSI0_LCDC_SEL_MASK =
+		1 << RK3288_DSI0_LCDC_SEL_SHIFT,
+	RK3288_DSI0_LCDC_SEL_BIG = 0,
+	RK3288_DSI0_LCDC_SEL_LIT = 1,
+
+	RK3288_EDP_LCDC_SEL_SHIFT = 0x5,
+	RK3288_EDP_LCDC_SEL_MASK =
+		1 << RK3288_EDP_LCDC_SEL_SHIFT,
+	RK3288_EDP_LCDC_SEL_BIG = 0,
+	RK3288_EDP_LCDC_SEL_LIT = 1,
+
+	RK3288_HDMI_LCDC_SEL_SHIFT = 0x4,
+	RK3288_HDMI_LCDC_SEL_MASK =
+		1 << RK3288_HDMI_LCDC_SEL_SHIFT,
+	RK3288_HDMI_LCDC_SEL_BIG = 0,
+	RK3288_HDMI_LCDC_SEL_LIT = 1,
+
+	RK3288_LVDS_LCDC_SEL_SHIFT = 0x3,
+	RK3288_LVDS_LCDC_SEL_MASK =
+		1 << RK3288_LVDS_LCDC_SEL_SHIFT,
+	RK3288_LVDS_LCDC_SEL_BIG = 0,
+	RK3288_LVDS_LCDC_SEL_LIT = 1,
+};
+
+/* RK3288_SOC_CON8 */
+enum GRF_SOC_CON8 {
+	RK3288_DPHY_TX0_RXMODE_SHIFT = 4,
+	RK3288_DPHY_TX0_RXMODE_MASK =
+	   0xf << RK3288_DPHY_TX0_RXMODE_SHIFT,
+	RK3288_DPHY_TX0_RXMODE_EN = 0xf,
+	RK3288_DPHY_TX0_RXMODE_DIS = 0,
+
+	RK3288_DPHY_TX0_TXSTOPMODE_SHIFT = 0x8,
+	RK3288_DPHY_TX0_TXSTOPMODE_MASK =
+	   0xf << RK3288_DPHY_TX0_TXSTOPMODE_SHIFT,
+	RK3288_DPHY_TX0_TXSTOPMODE_EN = 0xf,
+	RK3288_DPHY_TX0_TXSTOPMODE_DIS = 0,
+
+	RK3288_DPHY_TX0_TURNREQUEST_SHIFT = 0,
+	RK3288_DPHY_TX0_TURNREQUEST_MASK =
+	   0xf << RK3288_DPHY_TX0_TURNREQUEST_SHIFT,
+	RK3288_DPHY_TX0_TURNREQUEST_EN = 0xf,
+	RK3288_DPHY_TX0_TURNREQUEST_DIS = 0,
+};
+
+/* GRF_IO_VSEL */
+enum {
+	GPIO1830_V18SEL_SHIFT		= 9,
+	GPIO1830_V18SEL_MASK		= 1,
+	GPIO1830_V18SEL_3_3V		= 0,
+	GPIO1830_V18SEL_1_8V,
+
+	GPIO30_V18SEL_SHIFT	= 8,
+	GPIO30_V18SEL_MASK	= 1,
+	GPIO30_V18SEL_3_3V	= 0,
+	GPIO30_V18SEL_1_8V,
+
+	SDCARD_V18SEL_SHIFT	= 7,
+	SDCARD_V18SEL_MASK	= 1,
+	SDCARD_V18SEL_3_3V	= 0,
+	SDCARD_V18SEL_1_8V,
+
+	AUDIO_V18SEL_SHIFT	= 6,
+	AUDIO_V18SEL_MASK	= 1,
+	AUDIO_V18SEL_3_3V	= 0,
+	AUDIO_V18SEL_1_8V,
+
+	BB_V18SEL_SHIFT		= 5,
+	BB_V18SEL_MASK		= 1,
+	BB_V18SEL_3_3V		= 0,
+	BB_V18SEL_1_8V,
+
+	WIFI_V18SEL_SHIFT	= 4,
+	WIFI_V18SEL_MASK	= 1,
+	WIFI_V18SEL_3_3V	= 0,
+	WIFI_V18SEL_1_8V,
+
+	FLASH1_V18SEL_SHIFT	= 3,
+	FLASH1_V18SEL_MASK	= 1,
+	FLASH1_V18SEL_3_3V	= 0,
+	FLASH1_V18SEL_1_8V,
+
+	FLASH0_V18SEL_SHIFT	= 2,
+	FLASH0_V18SEL_MASK	= 1,
+	FLASH0_V18SEL_3_3V	= 0,
+	FLASH0_V18SEL_1_8V,
+
+	DVP_V18SEL_SHIFT	= 1,
+	DVP_V18SEL_MASK		= 1,
+	DVP_V18SEL_3_3V		= 0,
+	DVP_V18SEL_1_8V,
+
+	LCDC_V18SEL_SHIFT	= 0,
+	LCDC_V18SEL_MASK	= 1,
+	LCDC_V18SEL_3_3V	= 0,
+	LCDC_V18SEL_1_8V,
+};
+
+/* GPIO Bias settings */
+enum GPIO_BIAS {
+	GPIO_BIAS_2MA = 0,
+	GPIO_BIAS_4MA,
+	GPIO_BIAS_8MA,
+	GPIO_BIAS_12MA,
+};
+
+#define GPIO_BIAS_MASK	0x3
+#define GPIO_BIAS_SHIFT(x)  ((x) * 2)
+
+#define GPIO_PULL_MASK	0x3
+#define GPIO_PULL_SHIFT(x)  ((x) * 2)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3328.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3328.h
new file mode 100644
index 000000000..d8a46800f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3328.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __SOC_ROCKCHIP_RK3328_GRF_H__
+#define __SOC_ROCKCHIP_RK3328_GRF_H__
+
+struct rk3328_grf_regs {
+	u32 gpio0a_iomux;
+	u32 gpio0b_iomux;
+	u32 gpio0c_iomux;
+	u32 gpio0d_iomux;
+	u32 gpio1a_iomux;
+	u32 gpio1b_iomux;
+	u32 gpio1c_iomux;
+	u32 gpio1d_iomux;
+	u32 gpio2a_iomux;
+	u32 gpio2bl_iomux;
+	u32 gpio2bh_iomux;
+	u32 gpio2cl_iomux;
+	u32 gpio2ch_iomux;
+	u32 gpio2d_iomux;
+	u32 gpio3al_iomux;
+	u32 gpio3ah_iomux;
+	u32 gpio3bl_iomux;
+	u32 gpio3bh_iomux;
+	u32 gpio3c_iomux;
+	u32 gpio3d_iomux;
+	u32 com_iomux;
+	u32 reserved1[(0x100 - 0x54) / 4];
+
+	u32 gpio0a_p;
+	u32 gpio0b_p;
+	u32 gpio0c_p;
+	u32 gpio0d_p;
+	u32 gpio1a_p;
+	u32 gpio1b_p;
+	u32 gpio1c_p;
+	u32 gpio1d_p;
+	u32 gpio2a_p;
+	u32 gpio2b_p;
+	u32 gpio2c_p;
+	u32 gpio2d_p;
+	u32 gpio3a_p;
+	u32 gpio3b_p;
+	u32 gpio3c_p;
+	u32 gpio3d_p;
+	u32 reserved2[(0x200 - 0x140) / 4];
+	u32 gpio0a_e;
+	u32 gpio0b_e;
+	u32 gpio0c_e;
+	u32 gpio0d_e;
+	u32 gpio1a_e;
+	u32 gpio1b_e;
+	u32 gpio1c_e;
+	u32 gpio1d_e;
+	u32 gpio2a_e;
+	u32 gpio2b_e;
+	u32 gpio2c_e;
+	u32 gpio2d_e;
+	u32 gpio3a_e;
+	u32 gpio3b_e;
+	u32 gpio3c_e;
+	u32 gpio3d_e;
+	u32 reserved3[(0x300 - 0x240) / 4];
+	u32 gpio0l_sr;
+	u32 gpio0h_sr;
+	u32 gpio1l_sr;
+	u32 gpio1h_sr;
+	u32 gpio2l_sr;
+	u32 gpio2h_sr;
+	u32 gpio3l_sr;
+	u32 gpio3h_sr;
+	u32 reserved4[(0x380 - 0x320) / 4];
+	u32 gpio0l_smt;
+	u32 gpio0h_smt;
+	u32 gpio1l_smt;
+	u32 gpio1h_smt;
+	u32 gpio2l_smt;
+	u32 gpio2h_smt;
+	u32 gpio3l_smt;
+	u32 gpio3h_smt;
+	u32 reserved5[(0x400 - 0x3a0) / 4];
+	u32 soc_con[11];
+	u32 reserved6[(0x480 - 0x42c) / 4];
+	u32 soc_status[5];
+	u32 reserved7[(0x4c0 - 0x494) / 4];
+	u32 otg3_con[2];
+	u32 reserved8[(0x500 - 0x4c8) / 4];
+	u32 cpu_con[2];
+	u32 reserved9[(0x520 - 0x508) / 4];
+	u32 cpu_status[2];
+	u32 reserved10[(0x5c8 - 0x528) / 4];
+	u32 os_reg[8];
+	u32 reserved11[(0x680 - 0x5e8) / 4];
+	u32 sig_detect_con;
+	u32 reserved12[3];
+	u32 sig_detect_status;
+	u32 reserved13[3];
+	u32 sig_detect_status_clr;
+	u32 reserved14[3];
+
+	u32 sdmmc_det_counter;
+	u32 reserved15[(0x700 - 0x6b4) / 4];
+	u32 host0_con[3];
+	u32 reserved16[(0x880 - 0x70c) / 4];
+	u32 otg_con0;
+	u32 reserved17[3];
+	u32 host0_status;
+	u32 reserved18[(0x900 - 0x894) / 4];
+	u32 mac_con[3];
+	u32 reserved19[(0xb00 - 0x90c) / 4];
+	u32 macphy_con[4];
+	u32 macphy_status;
+};
+check_member(rk3328_grf_regs, macphy_status, 0xb10);
+
+struct rk3328_sgrf_regs {
+	u32 soc_con[6];
+	u32 reserved0[(0x100 - 0x18) / 4];
+	u32 dmac_con[6];
+	u32 reserved1[(0x180 - 0x118) / 4];
+	u32 fast_boot_addr;
+	u32 reserved2[(0x200 - 0x184) / 4];
+	u32 chip_fuse_con;
+	u32 reserved3[(0x280 - 0x204) / 4];
+	u32 hdcp_key_reg[8];
+	u32 hdcp_key_access_mask;
+};
+check_member(rk3328_sgrf_regs, hdcp_key_access_mask, 0x2a0);
+
+#endif	/* __SOC_ROCKCHIP_RK3328_GRF_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3368.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3368.h
new file mode 100644
index 000000000..0079d2007
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3368.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+#ifndef _ASM_ARCH_GRF_RK3368_H
+#define _ASM_ARCH_GRF_RK3368_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct rk3368_grf {
+	u32 gpio1a_iomux;
+	u32 gpio1b_iomux;
+	u32 gpio1c_iomux;
+	u32 gpio1d_iomux;
+	u32 gpio2a_iomux;
+	u32 gpio2b_iomux;
+	u32 gpio2c_iomux;
+	u32 gpio2d_iomux;
+	u32 gpio3a_iomux;
+	u32 gpio3b_iomux;
+	u32 gpio3c_iomux;
+	u32 gpio3d_iomux;
+	u32 reserved[0x34];
+	u32 gpio1a_pull;
+	u32 gpio1b_pull;
+	u32 gpio1c_pull;
+	u32 gpio1d_pull;
+	u32 gpio2a_pull;
+	u32 gpio2b_pull;
+	u32 gpio2c_pull;
+	u32 gpio2d_pull;
+	u32 gpio3a_pull;
+	u32 gpio3b_pull;
+	u32 gpio3c_pull;
+	u32 gpio3d_pull;
+	u32 reserved1[0x34];
+	u32 gpio1a_drv;
+	u32 gpio1b_drv;
+	u32 gpio1c_drv;
+	u32 gpio1d_drv;
+	u32 gpio2a_drv;
+	u32 gpio2b_drv;
+	u32 gpio2c_drv;
+	u32 gpio2d_drv;
+	u32 gpio3a_drv;
+	u32 gpio3b_drv;
+	u32 gpio3c_drv;
+	u32 gpio3d_drv;
+	u32 reserved2[0x34];
+	u32 gpio1l_sr;
+	u32 gpio1h_sr;
+	u32 gpio2l_sr;
+	u32 gpio2h_sr;
+	u32 gpio3l_sr;
+	u32 gpio3h_sr;
+	u32 reserved3[0x1a];
+	u32 gpio_smt;
+	u32 reserved4[0x1f];
+	u32 soc_con0;
+	u32 soc_con1;
+	u32 soc_con2;
+	u32 soc_con3;
+	u32 soc_con4;
+	u32 soc_con5;
+	u32 soc_con6;
+	u32 soc_con7;
+	u32 soc_con8;
+	u32 soc_con9;
+	u32 soc_con10;
+	u32 soc_con11;
+	u32 soc_con12;
+	u32 soc_con13;
+	u32 soc_con14;
+	u32 soc_con15;
+	u32 soc_con16;
+	u32 soc_con17;
+	u32 reserved5[0x6e];
+	u32 ddrc0_con0;
+};
+check_member(rk3368_grf, soc_con17, 0x444);
+check_member(rk3368_grf, ddrc0_con0, 0x600);
+
+struct rk3368_pmu_grf {
+	u32 gpio0a_iomux;
+	u32 gpio0b_iomux;
+	u32 gpio0c_iomux;
+	u32 gpio0d_iomux;
+	u32 gpio0a_pull;
+	u32 gpio0b_pull;
+	u32 gpio0c_pull;
+	u32 gpio0d_pull;
+	u32 gpio0a_drv;
+	u32 gpio0b_drv;
+	u32 gpio0c_drv;
+	u32 gpio0d_drv;
+	u32 gpio0l_sr;
+	u32 gpio0h_sr;
+	u32 reserved[0x72];
+	u32 os_reg[4];
+};
+check_member(rk3368_pmu_grf, gpio0h_sr, 0x34);
+check_member(rk3368_pmu_grf, os_reg[0], 0x200);
+
+/*GRF_SOC_CON11/12/13*/
+enum {
+	MCU_SRAM_BASE_BIT27_BIT12_SHIFT	= 0,
+	MCU_SRAM_BASE_BIT27_BIT12_MASK	= GENMASK(15, 0),
+};
+
+/*GRF_SOC_CON12*/
+enum {
+	MCU_EXSRAM_BASE_BIT27_BIT12_SHIFT  = 0,
+	MCU_EXSRAM_BASE_BIT27_BIT12_MASK   = GENMASK(15, 0),
+};
+
+/*GRF_SOC_CON13*/
+enum {
+	MCU_EXPERI_BASE_BIT27_BIT12_SHIFT  = 0,
+	MCU_EXPERI_BASE_BIT27_BIT12_MASK   = GENMASK(15, 0),
+};
+
+/*GRF_SOC_CON14*/
+enum {
+	MCU_EXPERI_BASE_BIT31_BIT28_SHIFT	= 12,
+	MCU_EXPERI_BASE_BIT31_BIT28_MASK	= GENMASK(15, 12),
+	MCU_EXSRAM_BASE_BIT31_BIT28_SHIFT	= 8,
+	MCU_EXSRAM_BASE_BIT31_BIT28_MASK	= GENMASK(11, 8),
+	MCU_SRAM_BASE_BIT31_BIT28_SHIFT		= 4,
+	MCU_SRAM_BASE_BIT31_BIT28_MASK		= GENMASK(7, 4),
+	MCU_CODE_BASE_BIT31_BIT28_SHIFT		= 0,
+	MCU_CODE_BASE_BIT31_BIT28_MASK		= GENMASK(3, 0),
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3399.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3399.h
new file mode 100644
index 000000000..dd89cd205
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rk3399.h
@@ -0,0 +1,672 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __SOC_ROCKCHIP_RK3399_GRF_H__
+#define __SOC_ROCKCHIP_RK3399_GRF_H__
+
+struct rk3399_grf_regs {
+	u32 reserved[0x800];
+	u32 usb3_perf_con0;
+	u32 usb3_perf_con1;
+	u32 usb3_perf_con2;
+	u32 usb3_perf_rd_max_latency_num;
+	u32 usb3_perf_rd_latency_samp_num;
+	u32 usb3_perf_rd_latency_acc_num;
+	u32 usb3_perf_rd_axi_total_byte;
+	u32 usb3_perf_wr_axi_total_byte;
+	u32 usb3_perf_working_cnt;
+	u32 reserved1[0x103];
+	u32 usb3otg0_con0;
+	u32 usb3otg0_con1;
+	u32 reserved2[2];
+	u32 usb3otg1_con0;
+	u32 usb3otg1_con1;
+	u32 reserved3[2];
+	u32 usb3otg0_status_lat0;
+	u32 usb3otg0_status_lat1;
+	u32 usb3otg0_status_cb;
+	u32 reserved4;
+	u32 usb3otg1_status_lat0;
+	u32 usb3otg1_status_lat1;
+	u32 usb3ogt1_status_cb;
+	u32 reserved5[0x6e5];
+	u32 pcie_perf_con0;
+	u32 pcie_perf_con1;
+	u32 pcie_perf_con2;
+	u32 pcie_perf_rd_max_latency_num;
+	u32 pcie_perf_rd_latency_samp_num;
+	u32 pcie_perf_rd_laterncy_acc_num;
+	u32 pcie_perf_rd_axi_total_byte;
+	u32 pcie_perf_wr_axi_total_byte;
+	u32 pcie_perf_working_cnt;
+	u32 reserved6[0x37];
+	u32 usb20_host0_con0;
+	u32 usb20_host0_con1;
+	u32 reserved7[2];
+	u32 usb20_host1_con0;
+	u32 usb20_host1_con1;
+	u32 reserved8[2];
+	u32 hsic_con0;
+	u32 hsic_con1;
+	u32 reserved9[6];
+	u32 grf_usbhost0_status;
+	u32 grf_usbhost1_Status;
+	u32 grf_hsic_status;
+	u32 reserved10[0xc9];
+	u32 hsicphy_con0;
+	u32 reserved11[3];
+	u32 usbphy0_ctrl[26];
+	u32 reserved12[6];
+	u32 usbphy1[26];
+	u32 reserved13[0x72f];
+	u32 soc_con9;
+	u32 reserved14[0x0a];
+	u32 soc_con20;
+	u32 soc_con21;
+	u32 soc_con22;
+	u32 soc_con23;
+	u32 soc_con24;
+	u32 soc_con25;
+	u32 soc_con26;
+	u32 reserved15[0xf65];
+	u32 cpu_con[4];
+	u32 reserved16[0x1c];
+	u32 cpu_status[6];
+	u32 reserved17[0x1a];
+	u32 a53_perf_con[4];
+	u32 a53_perf_rd_mon_st;
+	u32 a53_perf_rd_mon_end;
+	u32 a53_perf_wr_mon_st;
+	u32 a53_perf_wr_mon_end;
+	u32 a53_perf_rd_max_latency_num;
+	u32 a53_perf_rd_latency_samp_num;
+	u32 a53_perf_rd_laterncy_acc_num;
+	u32 a53_perf_rd_axi_total_byte;
+	u32 a53_perf_wr_axi_total_byte;
+	u32 a53_perf_working_cnt;
+	u32 a53_perf_int_status;
+	u32 reserved18[0x31];
+	u32 a72_perf_con[4];
+	u32 a72_perf_rd_mon_st;
+	u32 a72_perf_rd_mon_end;
+	u32 a72_perf_wr_mon_st;
+	u32 a72_perf_wr_mon_end;
+	u32 a72_perf_rd_max_latency_num;
+	u32 a72_perf_rd_latency_samp_num;
+	u32 a72_perf_rd_laterncy_acc_num;
+	u32 a72_perf_rd_axi_total_byte;
+	u32 a72_perf_wr_axi_total_byte;
+	u32 a72_perf_working_cnt;
+	u32 a72_perf_int_status;
+	u32 reserved19[0x7f6];
+	u32 soc_con5;
+	u32 soc_con6;
+	u32 reserved20[0x779];
+	u32 gpio2a_iomux;
+	union {
+		u32 iomux_spi2;
+		u32 gpio2b_iomux;
+	};
+	union {
+		u32 gpio2c_iomux;
+		u32 iomux_spi5;
+	};
+	u32 gpio2d_iomux;
+	union {
+		u32 gpio3a_iomux;
+		u32 iomux_spi0;
+	};
+	u32 gpio3b_iomux;
+	u32 gpio3c_iomux;
+	union {
+		u32 iomux_i2s0;
+		u32 gpio3d_iomux;
+	};
+	union {
+		u32 iomux_i2sclk;
+		u32 gpio4a_iomux;
+	};
+	union {
+		u32 iomux_sdmmc;
+		u32 iomux_uart2a;
+		u32 gpio4b_iomux;
+	};
+	union {
+		u32 iomux_pwm_0;
+		u32 iomux_pwm_1;
+		u32 iomux_uart2b;
+		u32 iomux_uart2c;
+		u32 iomux_edp_hotplug;
+		u32 gpio4c_iomux;
+	};
+	u32 gpio4d_iomux;
+	u32 reserved21[4];
+	u32 gpio2_p[4];
+	u32 gpio3_p[4];
+	u32 gpio4_p[4];
+	u32 reserved22[4];
+	u32 gpio2_sr[3][4];
+	u32 reserved23[4];
+	u32 gpio2_smt[3][4];
+	u32 reserved24[(0xe100 - 0xe0ec)/4 - 1];
+	u32 gpio2_e[4];
+	u32 gpio3_e[7];
+	u32 gpio4_e[5];
+	u32 reserved24a[(0xe200 - 0xe13c)/4 - 1];
+	u32 soc_con0;
+	u32 soc_con1;
+	u32 soc_con2;
+	u32 soc_con3;
+	u32 soc_con4;
+	u32 soc_con5_pcie;
+	u32 reserved25;
+	u32 soc_con7;
+	u32 soc_con8;
+	u32 soc_con9_pcie;
+	u32 reserved26[0x1e];
+	u32 soc_status[6];
+	u32 reserved27[0x32];
+	u32 ddrc0_con0;
+	u32 ddrc0_con1;
+	u32 ddrc1_con0;
+	u32 ddrc1_con1;
+	u32 reserved28[0xac];
+	u32 io_vsel;
+	u32 saradc_testbit;
+	u32 tsadc_testbit_l;
+	u32 tsadc_testbit_h;
+	u32 reserved29[0x6c];
+	u32 chip_id_addr;
+	u32 reserved30[0x1f];
+	u32 fast_boot_addr;
+	u32 reserved31[0x1df];
+	u32 emmccore_con[12];
+	u32 reserved32[4];
+	u32 emmccore_status[4];
+	u32 reserved33[0x1cc];
+	u32 emmcphy_con[7];
+	u32 reserved34;
+	u32 emmcphy_status;
+};
+check_member(rk3399_grf_regs, emmcphy_status, 0xf7a0);
+
+struct rk3399_pmugrf_regs {
+	union {
+		u32 iomux_pwm_3a;
+		u32 gpio0a_iomux;
+	};
+	u32 gpio0b_iomux;
+	u32 reserved0[2];
+	union {
+		u32 spi1_rxd;
+		u32 tsadc_int;
+		u32 gpio1a_iomux;
+	};
+	union {
+		u32 spi1_csclktx;
+		u32 iomux_pwm_3b;
+		u32 iomux_i2c0_sda;
+		u32 gpio1b_iomux;
+	};
+	union {
+		u32 iomux_pwm_2;
+		u32 iomux_i2c0_scl;
+		u32 gpio1c_iomux;
+	};
+	u32 gpio1d_iomux;
+	u32 reserved1[8];
+	u32 gpio0_p[2];
+	u32 reserved2[2];
+	u32 gpio1_p[4];
+	u32 reserved3[8];
+	u32 gpio0a_e;
+	u32 reserved4;
+	u32 gpio0b_e;
+	u32 reserved5[5];
+	u32 gpio1a_e;
+	u32 reserved6;
+	u32 gpio1b_e;
+	u32 reserved7;
+	u32 gpio1c_e;
+	u32 reserved8;
+	u32 gpio1d_e;
+	u32 reserved9[0x11];
+	u32 gpio0l_sr;
+	u32 reserved10;
+	u32 gpio1l_sr;
+	u32 gpio1h_sr;
+	u32 reserved11[4];
+	u32 gpio0a_smt;
+	u32 gpio0b_smt;
+	u32 reserved12[2];
+	u32 gpio1a_smt;
+	u32 gpio1b_smt;
+	u32 gpio1c_smt;
+	u32 gpio1d_smt;
+	u32 reserved13[8];
+	u32 gpio0l_he;
+	u32 reserved14;
+	u32 gpio1l_he;
+	u32 gpio1h_he;
+	u32 reserved15[4];
+	u32 soc_con0;
+	u32 reserved16[9];
+	u32 soc_con10;
+	u32 soc_con11;
+	u32 reserved17[0x24];
+	u32 pmupvtm_con0;
+	u32 pmupvtm_con1;
+	u32 pmupvtm_status0;
+	u32 pmupvtm_status1;
+	u32 grf_osc_e;
+	u32 reserved18[0x2b];
+	u32 os_reg0;
+	u32 os_reg1;
+	u32 os_reg2;
+	u32 os_reg3;
+};
+check_member(rk3399_pmugrf_regs, os_reg3, 0x30c);
+
+struct rk3399_pmusgrf_regs {
+	u32 ddr_rgn_con[35];
+	u32 reserved[0x1fe5];
+	u32 soc_con8;
+	u32 soc_con9;
+	u32 soc_con10;
+	u32 soc_con11;
+	u32 soc_con12;
+	u32 soc_con13;
+	u32 soc_con14;
+	u32 soc_con15;
+	u32 reserved1[3];
+	u32 soc_con19;
+	u32 soc_con20;
+	u32 soc_con21;
+	u32 soc_con22;
+	u32 reserved2[0x29];
+	u32 perilp_con[9];
+	u32 reserved4[7];
+	u32 perilp_status;
+	u32 reserved5[0xfaf];
+	u32 soc_con0;
+	u32 soc_con1;
+	u32 reserved6[0x3e];
+	u32 pmu_con[9];
+	u32 reserved7[0x17];
+	u32 fast_boot_addr;
+	u32 reserved8[0x1f];
+	u32 efuse_prg_mask;
+	u32 efuse_read_mask;
+	u32 reserved9[0x0e];
+	u32 pmu_slv_con0;
+	u32 pmu_slv_con1;
+	u32 reserved10[0x771];
+	u32 soc_con3;
+	u32 soc_con4;
+	u32 soc_con5;
+	u32 soc_con6;
+	u32 soc_con7;
+	u32 reserved11[8];
+	u32 soc_con16;
+	u32 soc_con17;
+	u32 soc_con18;
+	u32 reserved12[0xdd];
+	u32 slv_secure_con0;
+	u32 slv_secure_con1;
+	u32 reserved13;
+	u32 slv_secure_con2;
+	u32 slv_secure_con3;
+	u32 slv_secure_con4;
+};
+check_member(rk3399_pmusgrf_regs, slv_secure_con4, 0xe3d4);
+
+enum {
+	/* GRF_GPIO2A_IOMUX */
+	GRF_GPIO2A0_SEL_SHIFT   = 0,
+	GRF_GPIO2A0_SEL_MASK    = 3 << GRF_GPIO2A0_SEL_SHIFT,
+	GRF_I2C2_SDA            = 2,
+	GRF_GPIO2A1_SEL_SHIFT   = 2,
+	GRF_GPIO2A1_SEL_MASK    = 3 << GRF_GPIO2A1_SEL_SHIFT,
+	GRF_I2C2_SCL            = 2,
+	GRF_GPIO2A7_SEL_SHIFT   = 14,
+	GRF_GPIO2A7_SEL_MASK    = 3 << GRF_GPIO2A7_SEL_SHIFT,
+	GRF_I2C7_SDA            = 2,
+
+	/* GRF_GPIO2B_IOMUX */
+	GRF_GPIO2B0_SEL_SHIFT   = 0,
+	GRF_GPIO2B0_SEL_MASK    = 3 << GRF_GPIO2B0_SEL_SHIFT,
+	GRF_I2C7_SCL            = 2,
+	GRF_GPIO2B1_SEL_SHIFT	= 2,
+	GRF_GPIO2B1_SEL_MASK	= 3 << GRF_GPIO2B1_SEL_SHIFT,
+	GRF_SPI2TPM_RXD		= 1,
+	GRF_I2C6_SDA            = 2,
+	GRF_GPIO2B2_SEL_SHIFT	= 4,
+	GRF_GPIO2B2_SEL_MASK	= 3 << GRF_GPIO2B2_SEL_SHIFT,
+	GRF_SPI2TPM_TXD		= 1,
+	GRF_I2C6_SCL            = 2,
+	GRF_GPIO2B3_SEL_SHIFT	= 6,
+	GRF_GPIO2B3_SEL_MASK	= 3 << GRF_GPIO2B3_SEL_SHIFT,
+	GRF_SPI2TPM_CLK		= 1,
+	GRF_GPIO2B4_SEL_SHIFT	= 8,
+	GRF_GPIO2B4_SEL_MASK	= 3 << GRF_GPIO2B4_SEL_SHIFT,
+	GRF_SPI2TPM_CSN0	= 1,
+
+	/* GRF_GPIO2C_IOMUX */
+	GRF_GPIO2C0_SEL_SHIFT   = 0,
+	GRF_GPIO2C0_SEL_MASK    = 3 << GRF_GPIO2C0_SEL_SHIFT,
+	GRF_UART0BT_SIN         = 1,
+	GRF_GPIO2C1_SEL_SHIFT   = 2,
+	GRF_GPIO2C1_SEL_MASK    = 3 << GRF_GPIO2C1_SEL_SHIFT,
+	GRF_UART0BT_SOUT        = 1,
+	GRF_GPIO2C4_SEL_SHIFT   = 8,
+	GRF_GPIO2C4_SEL_MASK    = 3 << GRF_GPIO2C4_SEL_SHIFT,
+	GRF_SPI5EXPPLUS_RXD     = 2,
+	GRF_GPIO2C5_SEL_SHIFT   = 10,
+	GRF_GPIO2C5_SEL_MASK    = 3 << GRF_GPIO2C5_SEL_SHIFT,
+	GRF_SPI5EXPPLUS_TXD     = 2,
+	GRF_GPIO2C6_SEL_SHIFT   = 12,
+	GRF_GPIO2C6_SEL_MASK    = 3 << GRF_GPIO2C6_SEL_SHIFT,
+	GRF_SPI5EXPPLUS_CLK     = 2,
+	GRF_GPIO2C7_SEL_SHIFT   = 14,
+	GRF_GPIO2C7_SEL_MASK    = 3 << GRF_GPIO2C7_SEL_SHIFT,
+	GRF_SPI5EXPPLUS_CSN0    = 2,
+
+	/* GRF_GPIO3A_IOMUX */
+	GRF_GPIO3A0_SEL_SHIFT   = 0,
+	GRF_GPIO3A0_SEL_MASK    = 3 << GRF_GPIO3A0_SEL_SHIFT,
+	GRF_MAC_TXD2            = 1,
+	GRF_GPIO3A1_SEL_SHIFT   = 2,
+	GRF_GPIO3A1_SEL_MASK    = 3 << GRF_GPIO3A1_SEL_SHIFT,
+	GRF_MAC_TXD3            = 1,
+	GRF_GPIO3A2_SEL_SHIFT   = 4,
+	GRF_GPIO3A2_SEL_MASK    = 3 << GRF_GPIO3A2_SEL_SHIFT,
+	GRF_MAC_RXD2            = 1,
+	GRF_GPIO3A3_SEL_SHIFT   = 6,
+	GRF_GPIO3A3_SEL_MASK    = 3 << GRF_GPIO3A3_SEL_SHIFT,
+	GRF_MAC_RXD3            = 1,
+	GRF_GPIO3A4_SEL_SHIFT	= 8,
+	GRF_GPIO3A4_SEL_MASK	= 3 << GRF_GPIO3A4_SEL_SHIFT,
+	GRF_MAC_TXD0            = 1,
+	GRF_SPI0NORCODEC_RXD	= 2,
+	GRF_GPIO3A5_SEL_SHIFT	= 10,
+	GRF_GPIO3A5_SEL_MASK	= 3 << GRF_GPIO3A5_SEL_SHIFT,
+	GRF_MAC_TXD1            = 1,
+	GRF_SPI0NORCODEC_TXD	= 2,
+	GRF_GPIO3A6_SEL_SHIFT	= 12,
+	GRF_GPIO3A6_SEL_MASK	= 3 << GRF_GPIO3A6_SEL_SHIFT,
+	GRF_MAC_RXD0            = 1,
+	GRF_SPI0NORCODEC_CLK	= 2,
+	GRF_GPIO3A7_SEL_SHIFT	= 14,
+	GRF_GPIO3A7_SEL_MASK	= 3 << GRF_GPIO3A7_SEL_SHIFT,
+	GRF_MAC_RXD1            = 1,
+	GRF_SPI0NORCODEC_CSN0	= 2,
+
+	/* GRF_GPIO3B_IOMUX */
+	GRF_GPIO3B0_SEL_SHIFT	= 0,
+	GRF_GPIO3B0_SEL_MASK	= 3 << GRF_GPIO3B0_SEL_SHIFT,
+	GRF_MAC_MDC             = 1,
+	GRF_SPI0NORCODEC_CSN1	= 2,
+	GRF_GPIO3B1_SEL_SHIFT	= 2,
+	GRF_GPIO3B1_SEL_MASK	= 3 << GRF_GPIO3B1_SEL_SHIFT,
+	GRF_MAC_RXDV            = 1,
+	GRF_GPIO3B3_SEL_SHIFT	= 6,
+	GRF_GPIO3B3_SEL_MASK	= 3 << GRF_GPIO3B3_SEL_SHIFT,
+	GRF_MAC_CLK             = 1,
+	GRF_GPIO3B4_SEL_SHIFT	= 8,
+	GRF_GPIO3B4_SEL_MASK	= 3 << GRF_GPIO3B4_SEL_SHIFT,
+	GRF_MAC_TXEN            = 1,
+	GRF_GPIO3B5_SEL_SHIFT	= 10,
+	GRF_GPIO3B5_SEL_MASK	= 3 << GRF_GPIO3B5_SEL_SHIFT,
+	GRF_MAC_MDIO            = 1,
+	GRF_GPIO3B6_SEL_SHIFT   = 12,
+	GRF_GPIO3B6_SEL_MASK    = 3 << GRF_GPIO3B6_SEL_SHIFT,
+	GRF_MAC_RXCLK           = 1,
+	GRF_UART3_SIN           = 2,
+	GRF_GPIO3B7_SEL_SHIFT   = 14,
+	GRF_GPIO3B7_SEL_MASK    = 3 << GRF_GPIO3B7_SEL_SHIFT,
+	GRF_UART3_SOUT          = 2,
+
+	/* GRF_GPIO3C_IOMUX */
+	GRF_GPIO3C1_SEL_SHIFT	= 2,
+	GRF_GPIO3C1_SEL_MASK	= 3 << GRF_GPIO3C1_SEL_SHIFT,
+	GRF_MAC_TXCLK           = 1,
+
+	/* GRF_GPIO4A_IOMUX */
+	GRF_GPIO4A1_SEL_SHIFT   = 2,
+	GRF_GPIO4A1_SEL_MASK    = 3 << GRF_GPIO4A1_SEL_SHIFT,
+	GRF_I2C1_SDA            = 1,
+	GRF_GPIO4A2_SEL_SHIFT   = 4,
+	GRF_GPIO4A2_SEL_MASK    = 3 << GRF_GPIO4A2_SEL_SHIFT,
+	GRF_I2C1_SCL            = 1,
+
+	/* GRF_GPIO4B_IOMUX */
+	GRF_GPIO4B0_SEL_SHIFT	= 0,
+	GRF_GPIO4B0_SEL_MASK	= 3 << GRF_GPIO4B0_SEL_SHIFT,
+	GRF_SDMMC_DATA0		= 1,
+	GRF_UART2DBGA_SIN	= 2,
+	GRF_GPIO4B1_SEL_SHIFT	= 2,
+	GRF_GPIO4B1_SEL_MASK	= 3 << GRF_GPIO4B1_SEL_SHIFT,
+	GRF_SDMMC_DATA1		= 1,
+	GRF_UART2DBGA_SOUT	= 2,
+	GRF_GPIO4B2_SEL_SHIFT	= 4,
+	GRF_GPIO4B2_SEL_MASK	= 3 << GRF_GPIO4B2_SEL_SHIFT,
+	GRF_SDMMC_DATA2		= 1,
+	GRF_GPIO4B3_SEL_SHIFT	= 6,
+	GRF_GPIO4B3_SEL_MASK	= 3 << GRF_GPIO4B3_SEL_SHIFT,
+	GRF_SDMMC_DATA3		= 1,
+	GRF_GPIO4B4_SEL_SHIFT	= 8,
+	GRF_GPIO4B4_SEL_MASK    = 3 << GRF_GPIO4B4_SEL_SHIFT,
+	GRF_SDMMC_CLKOUT        = 1,
+	GRF_GPIO4B5_SEL_SHIFT   = 10,
+	GRF_GPIO4B5_SEL_MASK    = 3 << GRF_GPIO4B5_SEL_SHIFT,
+	GRF_SDMMC_CMD           = 1,
+
+	/*  GRF_GPIO4C_IOMUX */
+	GRF_GPIO4C0_SEL_SHIFT   = 0,
+	GRF_GPIO4C0_SEL_MASK    = 3 << GRF_GPIO4C0_SEL_SHIFT,
+	GRF_UART2DGBB_SIN       = 2,
+	GRF_HDMII2C_SCL         = 3,
+	GRF_GPIO4C1_SEL_SHIFT   = 2,
+	GRF_GPIO4C1_SEL_MASK    = 3 << GRF_GPIO4C1_SEL_SHIFT,
+	GRF_UART2DGBB_SOUT      = 2,
+	GRF_HDMII2C_SDA         = 3,
+	GRF_GPIO4C2_SEL_SHIFT   = 4,
+	GRF_GPIO4C2_SEL_MASK    = 3 << GRF_GPIO4C2_SEL_SHIFT,
+	GRF_PWM_0               = 1,
+	GRF_GPIO4C3_SEL_SHIFT   = 6,
+	GRF_GPIO4C3_SEL_MASK    = 3 << GRF_GPIO4C3_SEL_SHIFT,
+	GRF_UART2DGBC_SIN       = 1,
+	GRF_GPIO4C4_SEL_SHIFT   = 8,
+	GRF_GPIO4C4_SEL_MASK    = 3 << GRF_GPIO4C4_SEL_SHIFT,
+	GRF_UART2DBGC_SOUT      = 1,
+	GRF_GPIO4C6_SEL_SHIFT   = 12,
+	GRF_GPIO4C6_SEL_MASK    = 3 << GRF_GPIO4C6_SEL_SHIFT,
+	GRF_PWM_1               = 1,
+
+	/* GRF_GPIO3A_E01 */
+	GRF_GPIO3A0_E_SHIFT = 0,
+	GRF_GPIO3A0_E_MASK = 7 << GRF_GPIO3A0_E_SHIFT,
+	GRF_GPIO3A1_E_SHIFT = 3,
+	GRF_GPIO3A1_E_MASK = 7 << GRF_GPIO3A1_E_SHIFT,
+	GRF_GPIO3A2_E_SHIFT = 6,
+	GRF_GPIO3A2_E_MASK = 7 << GRF_GPIO3A2_E_SHIFT,
+	GRF_GPIO3A3_E_SHIFT = 9,
+	GRF_GPIO3A3_E_MASK = 7 << GRF_GPIO3A3_E_SHIFT,
+	GRF_GPIO3A4_E_SHIFT = 12,
+	GRF_GPIO3A4_E_MASK = 7 << GRF_GPIO3A4_E_SHIFT,
+	GRF_GPIO3A5_E0_SHIFT = 15,
+	GRF_GPIO3A5_E0_MASK = 1 << GRF_GPIO3A5_E0_SHIFT,
+
+	/*  GRF_GPIO3A_E2 */
+	GRF_GPIO3A5_E12_SHIFT = 0,
+	GRF_GPIO3A5_E12_MASK = 3 << GRF_GPIO3A5_E12_SHIFT,
+	GRF_GPIO3A6_E_SHIFT = 2,
+	GRF_GPIO3A6_E_MASK = 7 << GRF_GPIO3A6_E_SHIFT,
+	GRF_GPIO3A7_E_SHIFT = 5,
+	GRF_GPIO3A7_E_MASK = 7 << GRF_GPIO3A7_E_SHIFT,
+
+	/* GRF_GPIO3B_E01 */
+	GRF_GPIO3B0_E_SHIFT = 0,
+	GRF_GPIO3B0_E_MASK = 7 << GRF_GPIO3B0_E_SHIFT,
+	GRF_GPIO3B1_E_SHIFT = 3,
+	GRF_GPIO3B1_E_MASK = 7 << GRF_GPIO3B1_E_SHIFT,
+	GRF_GPIO3B2_E_SHIFT = 6,
+	GRF_GPIO3B2_E_MASK = 7 << GRF_GPIO3B2_E_SHIFT,
+	GRF_GPIO3B3_E_SHIFT = 9,
+	GRF_GPIO3B3_E_MASK = 7 << GRF_GPIO3B3_E_SHIFT,
+	GRF_GPIO3B4_E_SHIFT = 12,
+	GRF_GPIO3B4_E_MASK = 7 << GRF_GPIO3B4_E_SHIFT,
+	GRF_GPIO3B5_E0_SHIFT = 15,
+	GRF_GPIO3B5_E0_MASK = 1 << GRF_GPIO3B5_E0_SHIFT,
+
+	/*  GRF_GPIO3A_E2 */
+	GRF_GPIO3B5_E12_SHIFT = 0,
+	GRF_GPIO3B5_E12_MASK = 3 << GRF_GPIO3B5_E12_SHIFT,
+	GRF_GPIO3B6_E_SHIFT = 2,
+	GRF_GPIO3B6_E_MASK = 7 << GRF_GPIO3B6_E_SHIFT,
+	GRF_GPIO3B7_E_SHIFT = 5,
+	GRF_GPIO3B7_E_MASK = 7 << GRF_GPIO3B7_E_SHIFT,
+
+	/* GRF_GPIO3C_E01 */
+	GRF_GPIO3C0_E_SHIFT = 0,
+	GRF_GPIO3C0_E_MASK = 7 << GRF_GPIO3C0_E_SHIFT,
+	GRF_GPIO3C1_E_SHIFT = 3,
+	GRF_GPIO3C1_E_MASK = 7 << GRF_GPIO3C1_E_SHIFT,
+	GRF_GPIO3C2_E_SHIFT = 6,
+	GRF_GPIO3C2_E_MASK = 7 << GRF_GPIO3C2_E_SHIFT,
+	GRF_GPIO3C3_E_SHIFT = 9,
+	GRF_GPIO3C3_E_MASK = 7 << GRF_GPIO3C3_E_SHIFT,
+	GRF_GPIO3C4_E_SHIFT = 12,
+	GRF_GPIO3C4_E_MASK = 7 << GRF_GPIO3C4_E_SHIFT,
+	GRF_GPIO3C5_E0_SHIFT = 15,
+	GRF_GPIO3C5_E0_MASK = 1 << GRF_GPIO3C5_E0_SHIFT,
+
+	/*  GRF_GPIO3C_E2 */
+	GRF_GPIO3C5_E12_SHIFT = 0,
+	GRF_GPIO3C5_E12_MASK = 3 << GRF_GPIO3C5_E12_SHIFT,
+	GRF_GPIO3C6_E_SHIFT = 2,
+	GRF_GPIO3C6_E_MASK = 7 << GRF_GPIO3C6_E_SHIFT,
+	GRF_GPIO3C7_E_SHIFT = 5,
+	GRF_GPIO3C7_E_MASK = 7 << GRF_GPIO3C7_E_SHIFT,
+
+	/* GRF_SOC_CON7 */
+	GRF_UART_DBG_SEL_SHIFT  = 10,
+	GRF_UART_DBG_SEL_MASK   = 3 << GRF_UART_DBG_SEL_SHIFT,
+	GRF_UART_DBG_SEL_C      = 2,
+
+	/* GRF_SOC_CON20 */
+	GRF_DSI0_VOP_SEL_SHIFT  = 0,
+	GRF_DSI0_VOP_SEL_MASK   = 1 << GRF_DSI0_VOP_SEL_SHIFT,
+	GRF_DSI0_VOP_SEL_B      = 0,
+	GRF_DSI0_VOP_SEL_L      = 1,
+	GRF_RK3399_HDMI_VOP_SEL_MASK = 1 << 6,
+	GRF_RK3399_HDMI_VOP_SEL_B = 0 << 6,
+	GRF_RK3399_HDMI_VOP_SEL_L = 1 << 6,
+
+	/* GRF_SOC_CON22 */
+	GRF_DPHY_TX0_RXMODE_SHIFT = 0,
+	GRF_DPHY_TX0_RXMODE_MASK  = 0xf << GRF_DPHY_TX0_RXMODE_SHIFT,
+	GRF_DPHY_TX0_RXMODE_EN    = 0xb,
+	GRF_DPHY_TX0_RXMODE_DIS   = 0,
+
+	GRF_DPHY_TX0_TXSTOPMODE_SHIFT = 4,
+	GRF_DPHY_TX0_TXSTOPMODE_MASK  = 0xf0 << GRF_DPHY_TX0_TXSTOPMODE_SHIFT,
+	GRF_DPHY_TX0_TXSTOPMODE_EN    = 0xc,
+	GRF_DPHY_TX0_TXSTOPMODE_DIS   = 0,
+
+	GRF_DPHY_TX0_TURNREQUEST_SHIFT = 12,
+	GRF_DPHY_TX0_TURNREQUEST_MASK  =
+		0xf000 << GRF_DPHY_TX0_TURNREQUEST_SHIFT,
+	GRF_DPHY_TX0_TURNREQUEST_EN    = 0x1,
+	GRF_DPHY_TX0_TURNREQUEST_DIS   = 0,
+
+	/*  PMUGRF_GPIO0A_IOMUX */
+	PMUGRF_GPIO0A6_SEL_SHIFT        = 12,
+	PMUGRF_GPIO0A6_SEL_MASK = 3 << PMUGRF_GPIO0A6_SEL_SHIFT,
+	PMUGRF_PWM_3A           = 1,
+
+	/*  PMUGRF_GPIO1A_IOMUX */
+	PMUGRF_GPIO1A7_SEL_SHIFT        = 14,
+	PMUGRF_GPIO1A7_SEL_MASK = 3 << PMUGRF_GPIO1A7_SEL_SHIFT,
+	PMUGRF_SPI1EC_RXD       = 2,
+
+	/*  PMUGRF_GPIO1B_IOMUX */
+	PMUGRF_GPIO1B0_SEL_SHIFT        = 0,
+	PMUGRF_GPIO1B0_SEL_MASK = 3 << PMUGRF_GPIO1B0_SEL_SHIFT,
+	PMUGRF_SPI1EC_TXD       = 2,
+	PMUGRF_GPIO1B1_SEL_SHIFT        = 2,
+	PMUGRF_GPIO1B1_SEL_MASK = 3 << PMUGRF_GPIO1B1_SEL_SHIFT,
+	PMUGRF_SPI1EC_CLK       = 2,
+	PMUGRF_GPIO1B2_SEL_SHIFT        = 4,
+	PMUGRF_GPIO1B2_SEL_MASK = 3 << PMUGRF_GPIO1B2_SEL_SHIFT,
+	PMUGRF_SPI1EC_CSN0      = 2,
+	PMUGRF_GPIO1B3_SEL_SHIFT	= 6,
+	PMUGRF_GPIO1B3_SEL_MASK	= 3 << PMUGRF_GPIO1B3_SEL_SHIFT,
+	PMUGRF_I2C4_SDA         = 1,
+	PMUGRF_GPIO1B4_SEL_SHIFT        = 8,
+	PMUGRF_GPIO1B4_SEL_MASK	= 3 << PMUGRF_GPIO1B4_SEL_SHIFT,
+	PMUGRF_I2C4_SCL	        = 1,
+	PMUGRF_GPIO1B6_SEL_SHIFT        = 12,
+	PMUGRF_GPIO1B6_SEL_MASK = 3 << PMUGRF_GPIO1B6_SEL_SHIFT,
+	PMUGRF_PWM_3B           = 1,
+	PMUGRF_GPIO1B7_SEL_SHIFT        = 14,
+	PMUGRF_GPIO1B7_SEL_MASK = 3 << PMUGRF_GPIO1B7_SEL_SHIFT,
+	PMUGRF_I2C0PMU_SDA      = 2,
+
+	/*  PMUGRF_GPIO1C_IOMUX */
+	PMUGRF_GPIO1C0_SEL_SHIFT        = 0,
+	PMUGRF_GPIO1C0_SEL_MASK = 3 << PMUGRF_GPIO1C0_SEL_SHIFT,
+	PMUGRF_I2C0PMU_SCL      = 2,
+	PMUGRF_GPIO1C3_SEL_SHIFT        = 6,
+	PMUGRF_GPIO1C3_SEL_MASK = 3 << PMUGRF_GPIO1C3_SEL_SHIFT,
+	PMUGRF_PWM_2            = 1,
+	PMUGRF_GPIO1C4_SEL_SHIFT = 8,
+	PMUGRF_GPIO1C4_SEL_MASK = 3 << PMUGRF_GPIO1C4_SEL_SHIFT,
+	PMUGRF_I2C8PMU_SDA = 1,
+	PMUGRF_GPIO1C5_SEL_SHIFT = 10,
+	PMUGRF_GPIO1C5_SEL_MASK = 3 << PMUGRF_GPIO1C5_SEL_SHIFT,
+	PMUGRF_I2C8PMU_SCL = 1,
+};
+
+/* GRF_SOC_CON5 */
+enum {
+	RK3399_GMAC_PHY_INTF_SEL_SHIFT = 9,
+	RK3399_GMAC_PHY_INTF_SEL_MASK  = (7 << RK3399_GMAC_PHY_INTF_SEL_SHIFT),
+	RK3399_GMAC_PHY_INTF_SEL_RGMII = (1 << RK3399_GMAC_PHY_INTF_SEL_SHIFT),
+	RK3399_GMAC_PHY_INTF_SEL_RMII  = (4 << RK3399_GMAC_PHY_INTF_SEL_SHIFT),
+
+	RK3399_GMAC_CLK_SEL_SHIFT = 4,
+	RK3399_GMAC_CLK_SEL_MASK  = (3 << RK3399_GMAC_CLK_SEL_SHIFT),
+	RK3399_GMAC_CLK_SEL_125M  = (0 << RK3399_GMAC_CLK_SEL_SHIFT),
+	RK3399_GMAC_CLK_SEL_25M	  = (3 << RK3399_GMAC_CLK_SEL_SHIFT),
+	RK3399_GMAC_CLK_SEL_2_5M  = (2 << RK3399_GMAC_CLK_SEL_SHIFT),
+};
+
+/* GRF_SOC_CON6 */
+enum {
+	RK3399_RXCLK_DLY_ENA_GMAC_SHIFT = 15,
+	RK3399_RXCLK_DLY_ENA_GMAC_MASK =
+		(1 << RK3399_RXCLK_DLY_ENA_GMAC_SHIFT),
+	RK3399_RXCLK_DLY_ENA_GMAC_DISABLE = 0,
+	RK3399_RXCLK_DLY_ENA_GMAC_ENABLE =
+		(1 << RK3399_RXCLK_DLY_ENA_GMAC_SHIFT),
+
+	RK3399_TXCLK_DLY_ENA_GMAC_SHIFT	= 7,
+	RK3399_TXCLK_DLY_ENA_GMAC_MASK =
+		(1 << RK3399_TXCLK_DLY_ENA_GMAC_SHIFT),
+	RK3399_TXCLK_DLY_ENA_GMAC_DISABLE = 0,
+	RK3399_TXCLK_DLY_ENA_GMAC_ENABLE =
+		(1 << RK3399_TXCLK_DLY_ENA_GMAC_SHIFT),
+
+	RK3399_CLK_RX_DL_CFG_GMAC_SHIFT = 8,
+	RK3399_CLK_RX_DL_CFG_GMAC_MASK =
+		(0x7f << RK3399_CLK_RX_DL_CFG_GMAC_SHIFT),
+
+	RK3399_CLK_TX_DL_CFG_GMAC_SHIFT = 0,
+	RK3399_CLK_TX_DL_CFG_GMAC_MASK =
+		(0x7f << RK3399_CLK_TX_DL_CFG_GMAC_SHIFT),
+};
+
+#endif	/* __SOC_ROCKCHIP_RK3399_GRF_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rv1108.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rv1108.h
new file mode 100644
index 000000000..92bbe34af
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/grf_rv1108.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+#ifndef _ASM_ARCH_GRF_RV1108_H
+#define _ASM_ARCH_GRF_RV1108_H
+
+struct rv1108_grf {
+	u32 reserved[4];
+	u32 gpio1a_iomux;
+	u32 gpio1b_iomux;
+	u32 gpio1c_iomux;
+	u32 gpio1d_iomux;
+	u32 gpio2a_iomux;
+	u32 gpio2b_iomux;
+	u32 gpio2c_iomux;
+	u32 gpio2d_iomux;
+	u32 gpio3a_iomux;
+	u32 gpio3b_iomux;
+	u32 gpio3c_iomux;
+	u32 gpio3d_iomux;
+	u32 reserved1[52];
+	u32 gpio1a_pull;
+	u32 gpio1b_pull;
+	u32 gpio1c_pull;
+	u32 gpio1d_pull;
+	u32 gpio2a_pull;
+	u32 gpio2b_pull;
+	u32 gpio2c_pull;
+	u32 gpio2d_pull;
+	u32 gpio3a_pull;
+	u32 gpio3b_pull;
+	u32 gpio3c_pull;
+	u32 gpio3d_pull;
+	u32 reserved2[52];
+	u32 gpio1a_drv;
+	u32 gpio1b_drv;
+	u32 gpio1c_drv;
+	u32 gpio1d_drv;
+	u32 gpio2a_drv;
+	u32 gpio2b_drv;
+	u32 gpio2c_drv;
+	u32 gpio2d_drv;
+	u32 gpio3a_drv;
+	u32 gpio3b_drv;
+	u32 gpio3c_drv;
+	u32 gpio3d_drv;
+	u32 reserved3[50];
+	u32 gpio1l_sr;
+	u32 gpio1h_sr;
+	u32 gpio2l_sr;
+	u32 gpio2h_sr;
+	u32 gpio3l_sr;
+	u32 gpio3h_sr;
+	u32 reserved4[26];
+	u32 gpio1l_smt;
+	u32 gpio1h_smt;
+	u32 gpio2l_smt;
+	u32 gpio2h_smt;
+	u32 gpio3l_smt;
+	u32 gpio3h_smt;
+	u32 reserved5[24];
+	u32 soc_con0;
+	u32 soc_con1;
+	u32 soc_con2;
+	u32 soc_con3;
+	u32 soc_con4;
+	u32 soc_con5;
+	u32 soc_con6;
+	u32 soc_con7;
+	u32 soc_con8;
+	u32 soc_con9;
+	u32 soc_con10;
+	u32 soc_con11;
+	u32 reserved6[20];
+	u32 soc_status0;
+	u32 soc_status1;
+	u32 reserved7[30];
+	u32 cpu_con0;
+	u32 cpu_con1;
+	u32 reserved8[30];
+	u32 os_reg0;
+	u32 os_reg1;
+	u32 os_reg2;
+	u32 os_reg3;
+	u32 reserved9[29];
+	u32 ddr_status;
+	u32 reserved10[30];
+	u32 sig_det_con;
+	u32 reserved11[3];
+	u32 sig_det_status;
+	u32 reserved12[3];
+	u32 sig_det_clr;
+	u32 reserved13[23];
+	u32 host_con0;
+	u32 host_con1;
+	u32 reserved14[2];
+	u32 dma_con0;
+	u32 dma_con1;
+	u32 reserved15[59];
+	u32 uoc_status;
+	u32 reserved16[2];
+	u32 host_status;
+	u32 reserved17[59];
+	u32 gmac_con0;
+	u32 reserved18[191];
+	u32 chip_id;
+};
+
+check_member(rv1108_grf, chip_id, 0x0c00);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/hardware.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/hardware.h
new file mode 100644
index 000000000..62e8bed8f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/hardware.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Google, Inc
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#define RK_CLRSETBITS(clr, set)		((((clr) | (set)) << 16) | (set))
+#define RK_SETBITS(set)			RK_CLRSETBITS(0, set)
+#define RK_CLRBITS(clr)			RK_CLRSETBITS(clr, 0)
+
+#define rk_clrsetreg(addr, clr, set)	\
+				writel(((clr) | (set)) << 16 | (set), addr)
+#define rk_clrreg(addr, clr)		writel((clr) << 16, addr)
+#define rk_setreg(addr, set)		writel((set) << 16 | (set), addr)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/i2c.h
new file mode 100644
index 000000000..b0e1936f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/i2c.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+struct i2c_regs {
+	u32 con;
+	u32 clkdiv;
+	u32 mrxaddr;
+	u32 mrxraddr;
+	u32 mtxcnt;
+	u32 mrxcnt;
+	u32 ien;
+	u32 ipd;
+	u32 fcnt;
+	u32 reserved0[0x37];
+	u32 txdata[8];
+	u32 reserved1[0x38];
+	u32 rxdata[8];
+};
+
+/* Control register */
+#define I2C_CON_EN		(1 << 0)
+#define I2C_CON_MOD(mod)	((mod) << 1)
+#define I2C_MODE_TX		0x00
+#define I2C_MODE_TRX		0x01
+#define I2C_MODE_RX		0x02
+#define I2C_MODE_RRX		0x03
+#define I2C_CON_MASK		(3 << 1)
+
+#define I2C_CON_START		(1 << 3)
+#define I2C_CON_STOP		(1 << 4)
+#define I2C_CON_LASTACK		(1 << 5)
+#define I2C_CON_ACTACK		(1 << 6)
+
+/* Clock dividor register */
+#define I2C_CLKDIV_VAL(divl, divh) \
+	(((divl) & 0xffff) | (((divh) << 16) & 0xffff0000))
+
+/* the slave address accessed  for master rx mode */
+#define I2C_MRXADDR_SET(vld, addr)	(((vld) << 24) | (addr))
+
+/* the slave register address accessed  for master rx mode */
+#define I2C_MRXRADDR_SET(vld, raddr)	(((vld) << 24) | (raddr))
+
+/* interrupt enable register */
+#define I2C_BTFIEN		(1 << 0)
+#define I2C_BRFIEN		(1 << 1)
+#define I2C_MBTFIEN		(1 << 2)
+#define I2C_MBRFIEN		(1 << 3)
+#define I2C_STARTIEN		(1 << 4)
+#define I2C_STOPIEN		(1 << 5)
+#define I2C_NAKRCVIEN		(1 << 6)
+
+/* interrupt pending register */
+#define I2C_BTFIPD              (1 << 0)
+#define I2C_BRFIPD              (1 << 1)
+#define I2C_MBTFIPD             (1 << 2)
+#define I2C_MBRFIPD             (1 << 3)
+#define I2C_STARTIPD            (1 << 4)
+#define I2C_STOPIPD             (1 << 5)
+#define I2C_NAKRCVIPD           (1 << 6)
+#define I2C_IPD_ALL_CLEAN       0x7f
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/lvds_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/lvds_rk3288.h
new file mode 100644
index 000000000..fb25504b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/lvds_rk3288.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 Rockchip Inc.
+ */
+
+#ifndef _ASM_ARCH_LVDS_RK3288_H
+#define _ASM_ARCH_LVDS_RK3288_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define RK3288_LVDS_CH0_REG0			0x00
+#define RK3288_LVDS_CH0_REG0_LVDS_EN		BIT(7)
+#define RK3288_LVDS_CH0_REG0_TTL_EN		BIT(6)
+#define RK3288_LVDS_CH0_REG0_LANECK_EN		BIT(5)
+#define RK3288_LVDS_CH0_REG0_LANE4_EN		BIT(4)
+#define RK3288_LVDS_CH0_REG0_LANE3_EN		BIT(3)
+#define RK3288_LVDS_CH0_REG0_LANE2_EN		BIT(2)
+#define RK3288_LVDS_CH0_REG0_LANE1_EN		BIT(1)
+#define RK3288_LVDS_CH0_REG0_LANE0_EN		BIT(0)
+
+#define RK3288_LVDS_CH0_REG1			0x04
+#define RK3288_LVDS_CH0_REG1_LANECK_BIAS	BIT(5)
+#define RK3288_LVDS_CH0_REG1_LANE4_BIAS		BIT(4)
+#define RK3288_LVDS_CH0_REG1_LANE3_BIAS		BIT(3)
+#define RK3288_LVDS_CH0_REG1_LANE2_BIAS		BIT(2)
+#define RK3288_LVDS_CH0_REG1_LANE1_BIAS		BIT(1)
+#define RK3288_LVDS_CH0_REG1_LANE0_BIAS		BIT(0)
+
+#define RK3288_LVDS_CH0_REG2			0x08
+#define RK3288_LVDS_CH0_REG2_RESERVE_ON		BIT(7)
+#define RK3288_LVDS_CH0_REG2_LANECK_LVDS_MODE	BIT(6)
+#define RK3288_LVDS_CH0_REG2_LANE4_LVDS_MODE	BIT(5)
+#define RK3288_LVDS_CH0_REG2_LANE3_LVDS_MODE	BIT(4)
+#define RK3288_LVDS_CH0_REG2_LANE2_LVDS_MODE	BIT(3)
+#define RK3288_LVDS_CH0_REG2_LANE1_LVDS_MODE	BIT(2)
+#define RK3288_LVDS_CH0_REG2_LANE0_LVDS_MODE	BIT(1)
+#define RK3288_LVDS_CH0_REG2_PLL_FBDIV8		BIT(0)
+
+#define RK3288_LVDS_CH0_REG3			0x0c
+#define RK3288_LVDS_CH0_REG3_PLL_FBDIV_MASK	0xff
+
+#define RK3288_LVDS_CH0_REG4			0x10
+#define RK3288_LVDS_CH0_REG4_LANECK_TTL_MODE	BIT(5)
+#define RK3288_LVDS_CH0_REG4_LANE4_TTL_MODE	BIT(4)
+#define RK3288_LVDS_CH0_REG4_LANE3_TTL_MODE	BIT(3)
+#define RK3288_LVDS_CH0_REG4_LANE2_TTL_MODE	BIT(2)
+#define RK3288_LVDS_CH0_REG4_LANE1_TTL_MODE	BIT(1)
+#define RK3288_LVDS_CH0_REG4_LANE0_TTL_MODE	BIT(0)
+
+#define RK3288_LVDS_CH0_REG5			0x14
+#define RK3288_LVDS_CH0_REG5_LANECK_TTL_DATA	BIT(5)
+#define RK3288_LVDS_CH0_REG5_LANE4_TTL_DATA	BIT(4)
+#define RK3288_LVDS_CH0_REG5_LANE3_TTL_DATA	BIT(3)
+#define RK3288_LVDS_CH0_REG5_LANE2_TTL_DATA	BIT(2)
+#define RK3288_LVDS_CH0_REG5_LANE1_TTL_DATA	BIT(1)
+#define RK3288_LVDS_CH0_REG5_LANE0_TTL_DATA	BIT(0)
+
+#define RK3288_LVDS_CFG_REGC			0x30
+#define RK3288_LVDS_CFG_REGC_PLL_ENABLE		0x00
+#define RK3288_LVDS_CFG_REGC_PLL_DISABLE	0xff
+
+#define RK3288_LVDS_CH0_REGD			0x34
+#define RK3288_LVDS_CH0_REGD_PLL_PREDIV_MASK	0x1f
+
+#define RK3288_LVDS_CH0_REG20			0x80
+#define RK3288_LVDS_CH0_REG20_MSB		0x45
+#define RK3288_LVDS_CH0_REG20_LSB		0x44
+
+#define RK3288_LVDS_CFG_REG21			0x84
+#define RK3288_LVDS_CFG_REG21_TX_ENABLE		0x92
+#define RK3288_LVDS_CFG_REG21_TX_DISABLE	0x00
+
+/* fbdiv value is split over 2 registers, with bit8 in reg2 */
+#define RK3288_LVDS_PLL_FBDIV_REG2(_fbd) \
+		(_fbd & BIT(8) ? RK3288_LVDS_CH0_REG2_PLL_FBDIV8 : 0)
+#define RK3288_LVDS_PLL_FBDIV_REG3(_fbd) \
+		(_fbd & RK3288_LVDS_CH0_REG3_PLL_FBDIV_MASK)
+#define RK3288_LVDS_PLL_PREDIV_REGD(_pd) \
+		(_pd & RK3288_LVDS_CH0_REGD_PLL_PREDIV_MASK)
+
+#define RK3288_LVDS_SOC_CON6_SEL_VOP_LIT	BIT(3)
+
+#define LVDS_FMT_MASK			(7 << 16)
+#define LVDS_MSB			(1 << 3)
+#define LVDS_DUAL			(1 << 4)
+#define LVDS_FMT_1			(1 << 5)
+#define LVDS_TTL_EN			(1 << 6)
+#define LVDS_START_PHASE_RST_1		(1 << 7)
+#define LVDS_DCLK_INV			(1 << 8)
+#define LVDS_CH0_EN			(1 << 11)
+#define LVDS_CH1_EN			(1 << 12)
+#define LVDS_PWRDN			(1 << 15)
+
+#define LVDS_24BIT		(0 << 1)
+#define LVDS_18BIT		(1 << 1)
+
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/misc.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/misc.h
new file mode 100644
index 000000000..b6b03c934
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/misc.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RK3399: Architecture common definitions
+ *
+ * Copyright (C) 2019 Collabora Inc - https://www.collabora.com/
+ *      Rohan Garg <rohan.garg@collabora.com>
+ */
+
+int rockchip_cpuid_from_efuse(const u32 cpuid_offset,
+			      const u32 cpuid_length,
+			      u8 *cpuid);
+int rockchip_cpuid_set(const u8 *cpuid, const u32 cpuid_length);
+int rockchip_setup_macaddr(void);
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/periph.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/periph.h
new file mode 100644
index 000000000..2191b7d43
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/periph.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2015 Google, Inc
+ */
+
+#ifndef _ASM_ARCH_PERIPH_H
+#define _ASM_ARCH_PERIPH_H
+
+/*
+ * The peripherals supported by the hardware. This is used to specify clocks
+ * and pinctrl settings. Some SoCs will not support all of these, but it
+ * provides a common reference for common drivers to use.
+ */
+enum periph_id {
+	PERIPH_ID_PWM0,
+	PERIPH_ID_PWM1,
+	PERIPH_ID_PWM2,
+	PERIPH_ID_PWM3,
+	PERIPH_ID_PWM4,
+	PERIPH_ID_I2C0,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_I2C4,
+	PERIPH_ID_I2C5,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_I2C7,
+	PERIPH_ID_I2C8,
+	PERIPH_ID_SPI0,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SPI2,
+	PERIPH_ID_SPI3,
+	PERIPH_ID_SPI4,
+	PERIPH_ID_SPI5,
+	PERIPH_ID_UART0,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+	PERIPH_ID_UART3,
+	PERIPH_ID_UART4,
+	PERIPH_ID_LCDC0,
+	PERIPH_ID_LCDC1,
+	PERIPH_ID_SDMMC0,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_GMAC,
+	PERIPH_ID_SFC,
+	PERIPH_ID_I2S,
+
+	PERIPH_ID_COUNT,
+
+	/* Some aliases */
+	PERIPH_ID_EMMC = PERIPH_ID_SDMMC0,
+	PERIPH_ID_SDCARD = PERIPH_ID_SDMMC1,
+	PERIPH_ID_UART_BT = PERIPH_ID_UART0,
+	PERIPH_ID_UART_BB = PERIPH_ID_UART1,
+	PERIPH_ID_UART_DBG = PERIPH_ID_UART2,
+	PERIPH_ID_UART_GPS = PERIPH_ID_UART3,
+	PERIPH_ID_UART_EXP = PERIPH_ID_UART4,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3188.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3188.h
new file mode 100644
index 000000000..f7b9a0674
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3188.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#ifndef _ASM_ARCH_PMU_RK3188_H
+#define _ASM_ARCH_PMU_RK3188_H
+
+struct rk3188_pmu {
+	u32 wakeup_cfg[2];
+	u32 pwrdn_con;
+	u32 pwrdn_st;
+
+	u32 int_con;
+	u32 int_st;
+	u32 misc_con;
+
+	u32 osc_cnt;
+	u32 pll_cnt;
+	u32 pmu_cnt;
+	u32 ddrio_pwron_cnt;
+	u32 wakeup_rst_clr_cnt;
+	u32 scu_pwrdwn_cnt;
+	u32 scu_pwrup_cnt;
+	u32 misc_con1;
+	u32 gpio0_con;
+
+	u32 sys_reg[4];
+	u32 reserved0[4];
+	u32 stop_int_dly;
+	u32 gpio0_p[2];
+};
+check_member(rk3188_pmu, gpio0_p[1], 0x0068);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3288.h
new file mode 100644
index 000000000..8553d2eee
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3288.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * Copyright 2014 Rockchip Inc.
+ */
+
+#ifndef _ASM_ARCH_PMU_RK3288_H
+#define _ASM_ARCH_PMU_RK3288_H
+
+struct rk3288_pmu {
+	u32 wakeup_cfg[2];
+	u32 pwrdn_con;
+	u32 pwrdn_st;
+
+	u32 idle_req;
+	u32 idle_st;
+	u32 pwrmode_con;
+	u32 pwr_state;
+
+	u32 osc_cnt;
+	u32 pll_cnt;
+	u32 stabl_cnt;
+	u32 ddr0io_pwron_cnt;
+
+	u32 ddr1io_pwron_cnt;
+	u32 core_pwrdn_cnt;
+	u32 core_pwrup_cnt;
+	u32 gpu_pwrdn_cnt;
+
+	u32 gpu_pwrup_cnt;
+	u32 wakeup_rst_clr_cnt;
+	u32 sft_con;
+	u32 ddr_sref_st;
+
+	u32 int_con;
+	u32 int_st;
+	u32 boot_addr_sel;
+	u32 grf_con;
+
+	u32 gpio_sr;
+	u32 gpio0pull[3];
+
+	u32 gpio0drv[3];
+	u32 gpio_op;
+
+	u32 gpio0_sel18;	/* 0x80 */
+	u32 gpio0_iomux[4];	/* a, b, c, d */
+	u32 sys_reg[4];
+};
+check_member(rk3288_pmu, sys_reg[3], 0x00a0);
+
+enum {
+	PMU_GPIO0_A	= 0,
+	PMU_GPIO0_B,
+	PMU_GPIO0_C,
+	PMU_GPIO0_D,
+};
+
+/* PMU_GPIO0_B_IOMUX */
+enum {
+	GPIO0_B7_SHIFT		= 14,
+	GPIO0_B7_MASK		= 1,
+	GPIO0_B7_GPIOB7		= 0,
+	GPIO0_B7_I2C0PMU_SDA,
+
+	GPIO0_B5_SHIFT		= 10,
+	GPIO0_B5_MASK		= 1,
+	GPIO0_B5_GPIOB5		= 0,
+	GPIO0_B5_CLK_27M,
+
+	GPIO0_B2_SHIFT		= 4,
+	GPIO0_B2_MASK		= 1,
+	GPIO0_B2_GPIOB2		= 0,
+	GPIO0_B2_TSADC_INT,
+};
+
+/* PMU_GPIO0_C_IOMUX */
+enum {
+	GPIO0_C1_SHIFT		= 2,
+	GPIO0_C1_MASK		= 3,
+	GPIO0_C1_GPIOC1		= 0,
+	GPIO0_C1_TEST_CLKOUT,
+	GPIO0_C1_CLKT1_27M,
+
+	GPIO0_C0_SHIFT		= 0,
+	GPIO0_C0_MASK		= 1,
+	GPIO0_C0_GPIOC0		= 0,
+	GPIO0_C0_I2C0PMU_SCL,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3399.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3399.h
new file mode 100644
index 000000000..f1096dccc
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/pmu_rk3399.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * (C) Copyright 2018 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+#ifndef __SOC_ROCKCHIP_RK3399_PMU_H__
+#define __SOC_ROCKCHIP_RK3399_PMU_H__
+
+struct rk3399_pmu_regs {
+	u32 pmu_wakeup_cfg[5];
+	u32 pmu_pwrdn_con;
+	u32 pmu_pwrdn_st;
+	u32 pmu_pll_con;
+	u32 pmu_pwrmode_con;
+	u32 pmu_sft_con;
+	u32 pmu_int_con;
+	u32 pmu_int_st;
+	u32 pmu_gpio0_pos_int_con;
+	u32 pmu_gpio0_net_int_con;
+	u32 pmu_gpio1_pos_int_con;
+	u32 pmu_gpio1_net_int_con;
+	u32 pmu_gpio0_pos_int_st;
+	u32 pmu_gpio0_net_int_st;
+	u32 pmu_gpio1_pos_int_st;
+	u32 pmu_gpio1_net_int_st;
+	u32 pmu_pwrdn_inten;
+	u32 pmu_pwrdn_status;
+	u32 pmu_wakeup_status;
+	u32 pmu_bus_clr;
+	u32 pmu_bus_idle_req;
+	u32 pmu_bus_idle_st;
+	u32 pmu_bus_idle_ack;
+	u32 pmu_cci500_con;
+	u32 pmu_adb400_con;
+	u32 pmu_adb400_st;
+	u32 pmu_power_st;
+	u32 pmu_core_pwr_st;
+	u32 pmu_osc_cnt;
+	u32 pmu_plllock_cnt;
+	u32 pmu_pllrst_cnt;
+	u32 pmu_stable_cnt;
+	u32 pmu_ddrio_pwron_cnt;
+	u32 pmu_wakeup_rst_clr_cnt;
+	u32 pmu_ddr_sref_st;
+	u32 pmu_scu_l_pwrdn_cnt;
+	u32 pmu_scu_l_pwrup_cnt;
+	u32 pmu_scu_b_pwrdn_cnt;
+	u32 pmu_scu_b_pwrup_cnt;
+	u32 pmu_gpu_pwrdn_cnt;
+	u32 pmu_gpu_pwrup_cnt;
+	u32 pmu_center_pwrdn_cnt;
+	u32 pmu_center_pwrup_cnt;
+	u32 pmu_timeout_cnt;
+	u32 pmu_cpu0apm_con;
+	u32 pmu_cpu1apm_con;
+	u32 pmu_cpu2apm_con;
+	u32 pmu_cpu3apm_con;
+	u32 pmu_cpu0bpm_con;
+	u32 pmu_cpu1bpm_con;
+	u32 pmu_noc_auto_ena;
+	u32 pmu_pwrdn_con1;
+	u32 reserved0[0x4];
+	u32 pmu_sys_reg_reg0;
+	u32 pmu_sys_reg_reg1;
+	u32 pmu_sys_reg_reg2;
+	u32 pmu_sys_reg_reg3;
+};
+
+check_member(rk3399_pmu_regs, pmu_sys_reg_reg3, 0xfc);
+
+#endif	/* __SOC_ROCKCHIP_RK3399_PMU_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/pwm.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/pwm.h
new file mode 100644
index 000000000..e8594055c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/pwm.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Google, Inc
+ * (C) Copyright 2008-2014 Rockchip Electronics
+ */
+
+#ifndef _ASM_ARCH_PWM_H
+#define _ASM_ARCH_PWM_H
+
+struct rockchip_pwm_regs {
+	unsigned long duty;
+	unsigned long period;
+	unsigned long cntr;
+	unsigned long ctrl;
+};
+
+#define PWM_CTRL_TIMER_EN		(1 << 0)
+#define PWM_CTRL_OUTPUT_EN		(1 << 3)
+
+#define RK_PWM_DISABLE                  (0 << 0)
+#define RK_PWM_ENABLE                   (1 << 0)
+
+#define PWM_ONE_SHOT                    (0 << 1)
+#define PWM_CONTINUOUS                  (1 << 1)
+#define RK_PWM_CAPTURE                  (1 << 2)
+
+#define PWM_DUTY_POSTIVE                (1 << 3)
+#define PWM_DUTY_NEGATIVE               (0 << 3)
+#define PWM_DUTY_MASK			(1 << 3)
+
+#define PWM_INACTIVE_POSTIVE            (1 << 4)
+#define PWM_INACTIVE_NEGATIVE           (0 << 4)
+#define PWM_INACTIVE_MASK		(1 << 4)
+
+#define PWM_OUTPUT_LEFT                 (0 << 5)
+#define PWM_OUTPUT_CENTER               (1 << 5)
+
+#define PWM_LOCK			(1 << 6)
+#define PWM_UNLOCK			(0 << 6)
+
+#define PWM_LP_ENABLE                   (1 << 8)
+#define PWM_LP_DISABLE                  (0 << 8)
+
+#define PWM_SEL_SCALE_CLK		(1 << 9)
+#define PWM_SEL_SRC_CLK			(0 << 9)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/qos_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/qos_rk3288.h
new file mode 100644
index 000000000..c24b090b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/qos_rk3288.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 Rockchip Inc.
+ */
+#ifndef _ASM_ARCH_QOS_RK3288_H
+#define _ASM_ARCH_QOS_RK3288_H
+
+#define PRIORITY_HIGH_SHIFT	2
+#define PRIORITY_LOW_SHIFT	0
+
+#define CPU_AXI_QOS_PRIORITY    0x08
+
+#define VIO0_VOP_QOS            0xffad0400
+#define VIO1_VOP_QOS            0xffad0000
+#define VIO1_ISP_R_QOS          0xffad0900
+#define VIO1_ISP_W0_QOS         0xffad0100
+#define VIO1_ISP_W1_QOS         0xffad0180
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/rockchip_mipi_dsi.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/rockchip_mipi_dsi.h
new file mode 100644
index 000000000..c13957a62
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/rockchip_mipi_dsi.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ * author: Eric Gao <eric.gao@rock-chips.com>
+ */
+
+#ifndef ROCKCHIP_MIPI_DSI_H
+#define ROCKCHIP_MIPI_DSI_H
+
+/*
+ * All these mipi controller register declaration provide reg address offset,
+ * bits width, bit offset for a specified register bits. With these message, we
+ * can set or clear every bits individually for a 32bit widthregister. We use
+ * DSI_HOST_BITS macro definition to combinat these message using the following
+ * format: val(32bit) = addr(16bit) | width(8bit) | offest(8bit)
+ * For example:
+ *    #define SHUTDOWNZ           DSI_HOST_BITS(0x004, 1, 0)
+ * means SHUTDOWNZ is a signal reg bit with bit offset qual 0,and it's reg addr
+ * offset is 0x004.The conbinat result  = (0x004 << 16) | (1 << 8) | 0
+ */
+#define ADDR_SHIFT 16
+#define BITS_SHIFT 8
+#define OFFSET_SHIFT 0
+#define DSI_HOST_BITS(addr, bits, bit_offset) \
+((addr << ADDR_SHIFT) | (bits << BITS_SHIFT) | (bit_offset << OFFSET_SHIFT))
+
+/* DWC_DSI_VERSION_0x3133302A */
+#define VERSION				DSI_HOST_BITS(0x000, 32, 0)
+#define SHUTDOWNZ			DSI_HOST_BITS(0x004, 1, 0)
+#define TO_CLK_DIVISION		DSI_HOST_BITS(0x008, 8, 8)
+#define TX_ESC_CLK_DIVISION	DSI_HOST_BITS(0x008, 8, 0)
+#define DPI_VCID			DSI_HOST_BITS(0x00c, 2, 0)
+#define EN18_LOOSELY		DSI_HOST_BITS(0x010, 1, 8)
+#define DPI_COLOR_CODING	DSI_HOST_BITS(0x010, 4, 0)
+#define COLORM_ACTIVE_LOW	DSI_HOST_BITS(0x014, 1, 4)
+#define SHUTD_ACTIVE_LOW	DSI_HOST_BITS(0x014, 1, 3)
+#define HSYNC_ACTIVE_LOW	DSI_HOST_BITS(0x014, 1, 2)
+#define VSYNC_ACTIVE_LOW	DSI_HOST_BITS(0x014, 1, 1)
+#define DATAEN_ACTIVE_LOW	DSI_HOST_BITS(0x014, 1, 0)
+#define OUTVACT_LPCMD_TIME	DSI_HOST_BITS(0x018, 8, 16)
+#define INVACT_LPCMD_TIME	DSI_HOST_BITS(0x018, 8, 0)
+#define CRC_RX_EN			DSI_HOST_BITS(0x02c, 1, 4)
+#define ECC_RX_EN			DSI_HOST_BITS(0x02c, 1, 3)
+#define BTA_EN				DSI_HOST_BITS(0x02c, 1, 2)
+#define EOTP_RX_EN			DSI_HOST_BITS(0x02c, 1, 1)
+#define EOTP_TX_EN			DSI_HOST_BITS(0x02c, 1, 0)
+#define GEN_VID_RX			DSI_HOST_BITS(0x030, 2, 0)
+#define CMD_VIDEO_MODE		DSI_HOST_BITS(0x034, 1, 0)
+#define VPG_ORIENTATION		DSI_HOST_BITS(0x038, 1, 24)
+#define VPG_MODE			DSI_HOST_BITS(0x038, 1, 20)
+#define VPG_EN				DSI_HOST_BITS(0x038, 1, 16)
+#define LP_CMD_EN			DSI_HOST_BITS(0x038, 1, 15)
+#define FRAME_BTA_ACK_EN	DSI_HOST_BITS(0x038, 1, 14)
+#define LP_HFP_EN			DSI_HOST_BITS(0x038, 1, 13)
+#define LP_HBP_EN			DSI_HOST_BITS(0x038, 1, 12)
+#define LP_VACT_EN			DSI_HOST_BITS(0x038, 1, 11)
+#define LP_VFP_EN			DSI_HOST_BITS(0x038, 1, 10)
+#define LP_VBP_EN			DSI_HOST_BITS(0x038, 1, 9)
+#define LP_VSA_EN			DSI_HOST_BITS(0x038, 1, 8)
+#define VID_MODE_TYPE		DSI_HOST_BITS(0x038, 2, 0)
+#define VID_PKT_SIZE		DSI_HOST_BITS(0x03c, 14, 0)
+#define NUM_CHUNKS			DSI_HOST_BITS(0x040, 13, 0)
+#define NULL_PKT_SIZE		DSI_HOST_BITS(0x044, 13, 0)
+#define VID_HSA_TIME		DSI_HOST_BITS(0x048, 12, 0)
+#define VID_HBP_TIME		DSI_HOST_BITS(0x04c, 12, 0)
+#define VID_HLINE_TIME		DSI_HOST_BITS(0x050, 15, 0)
+#define VID_VSA_LINES		DSI_HOST_BITS(0x054, 10, 0)
+#define VID_VBP_LINES		DSI_HOST_BITS(0x058, 10, 0)
+#define VID_VFP_LINES		DSI_HOST_BITS(0x05c, 10, 0)
+#define VID_ACTIVE_LINES	DSI_HOST_BITS(0x060, 14, 0)
+#define EDPI_CMD_SIZE		DSI_HOST_BITS(0x064, 16, 0)
+#define MAX_RD_PKT_SIZE		DSI_HOST_BITS(0x068, 1, 24)
+#define DCS_LW_TX			DSI_HOST_BITS(0x068, 1, 19)
+#define DCS_SR_0P_TX		DSI_HOST_BITS(0x068, 1, 18)
+#define DCS_SW_1P_TX		DSI_HOST_BITS(0x068, 1, 17)
+#define DCS_SW_0P_TX		DSI_HOST_BITS(0x068, 1, 16)
+#define GEN_LW_TX			DSI_HOST_BITS(0x068, 1, 14)
+#define GEN_SR_2P_TX		DSI_HOST_BITS(0x068, 1, 13)
+#define GEN_SR_1P_TX		DSI_HOST_BITS(0x068, 1, 12)
+#define GEN_SR_0P_TX		DSI_HOST_BITS(0x068, 1, 11)
+#define GEN_SW_2P_TX		DSI_HOST_BITS(0x068, 1, 10)
+#define GEN_SW_1P_TX		DSI_HOST_BITS(0x068, 1, 9)
+#define GEN_SW_0P_TX		DSI_HOST_BITS(0x068, 1, 8)
+#define ACK_RQST_EN			DSI_HOST_BITS(0x068, 1, 1)
+#define TEAR_FX_EN			DSI_HOST_BITS(0x068, 1, 0)
+#define GEN_WC_MSBYTE		DSI_HOST_BITS(0x06c, 14, 16)
+#define GEN_WC_LSBYTE		DSI_HOST_BITS(0x06c, 8, 8)
+#define GEN_VC				DSI_HOST_BITS(0x06c, 2, 6)
+#define GEN_DT				DSI_HOST_BITS(0x06c, 6, 0)
+#define GEN_PLD_DATA		DSI_HOST_BITS(0x070, 32, 0)
+#define GEN_RD_CMD_BUSY		DSI_HOST_BITS(0x074, 1, 6)
+#define GEN_PLD_R_FULL		DSI_HOST_BITS(0x074, 1, 5)
+#define GEN_PLD_R_EMPTY		DSI_HOST_BITS(0x074, 1, 4)
+#define GEN_PLD_W_FULL		DSI_HOST_BITS(0x074, 1, 3)
+#define GEN_PLD_W_EMPTY		DSI_HOST_BITS(0x074, 1, 2)
+#define GEN_CMD_FULL		DSI_HOST_BITS(0x074, 1, 1)
+#define GEN_CMD_EMPTY		DSI_HOST_BITS(0x074, 1, 0)
+#define HSTX_TO_CNT			DSI_HOST_BITS(0x078, 16, 16)
+#define LPRX_TO_CNT			DSI_HOST_BITS(0x078, 16, 0)
+#define HS_RD_TO_CNT		DSI_HOST_BITS(0x07c, 16, 0)
+#define LP_RD_TO_CNT		DSI_HOST_BITS(0x080, 16, 0)
+#define PRESP_TO_MODE		DSI_HOST_BITS(0x084, 1, 24)
+#define HS_WR_TO_CNT		DSI_HOST_BITS(0x084, 16, 0)
+#define LP_WR_TO_CNT		DSI_HOST_BITS(0x088, 16, 0)
+#define BTA_TO_CNT			DSI_HOST_BITS(0x08c, 16, 0)
+#define AUTO_CLKLANE_CTRL	DSI_HOST_BITS(0x094, 1, 1)
+#define PHY_TXREQUESTCLKHS	DSI_HOST_BITS(0x094, 1, 0)
+#define PHY_HS2LP_TIME_CLK_LANE	DSI_HOST_BITS(0x098, 10, 16)
+#define PHY_HS2HS_TIME_CLK_LANE	DSI_HOST_BITS(0x098, 10, 0)
+#define PHY_HS2LP_TIME		DSI_HOST_BITS(0x09c, 8, 24)
+#define PHY_LP2HS_TIME		DSI_HOST_BITS(0x09c, 8, 16)
+#define MAX_RD_TIME			DSI_HOST_BITS(0x09c, 15, 0)
+#define PHY_FORCEPLL		DSI_HOST_BITS(0x0a0, 1, 3)
+#define PHY_ENABLECLK		DSI_HOST_BITS(0x0a0, 1, 2)
+#define PHY_RSTZ			DSI_HOST_BITS(0x0a0, 1, 1)
+#define PHY_SHUTDOWNZ		DSI_HOST_BITS(0x0a0, 1, 0)
+#define PHY_STOP_WAIT_TIME	DSI_HOST_BITS(0x0a4, 8, 8)
+#define N_LANES				DSI_HOST_BITS(0x0a4, 2, 0)
+#define PHY_TXEXITULPSLAN	DSI_HOST_BITS(0x0a8, 1, 3)
+#define PHY_TXREQULPSLAN	DSI_HOST_BITS(0x0a8, 1, 2)
+#define PHY_TXEXITULPSCLK	DSI_HOST_BITS(0x0a8, 1, 1)
+#define PHY_TXREQULPSCLK	DSI_HOST_BITS(0x0a8, 1, 0)
+#define PHY_TX_TRIGGERS		DSI_HOST_BITS(0x0ac, 4, 0)
+#define PHYSTOPSTATECLKLANE	DSI_HOST_BITS(0x0b0, 1, 2)
+#define PHYLOCK				DSI_HOST_BITS(0x0b0, 1, 0)
+#define PHY_TESTCLK			DSI_HOST_BITS(0x0b4, 1, 1)
+#define PHY_TESTCLR			DSI_HOST_BITS(0x0b4, 1, 0)
+#define PHY_TESTEN			DSI_HOST_BITS(0x0b8, 1, 16)
+#define PHY_TESTDOUT		DSI_HOST_BITS(0x0b8, 8, 8)
+#define PHY_TESTDIN			DSI_HOST_BITS(0x0b8, 8, 0)
+#define PHY_TEST_CTRL1		DSI_HOST_BITS(0x0b8, 17, 0)
+#define PHY_TEST_CTRL0		DSI_HOST_BITS(0x0b4, 2, 0)
+#define INT_ST0				DSI_HOST_BITS(0x0bc, 21, 0)
+#define INT_ST1				DSI_HOST_BITS(0x0c0, 18, 0)
+#define INT_MKS0			DSI_HOST_BITS(0x0c4, 21, 0)
+#define INT_MKS1			DSI_HOST_BITS(0x0c8, 18, 0)
+#define INT_FORCE0			DSI_HOST_BITS(0x0d8, 21, 0)
+#define INT_FORCE1			DSI_HOST_BITS(0x0dc, 18, 0)
+
+#define CODE_HS_RX_CLOCK	0x34
+#define CODE_HS_RX_LANE0	0x44
+#define CODE_HS_RX_LANE1	0x54
+#define CODE_HS_RX_LANE2	0x84
+#define CODE_HS_RX_LANE3	0x94
+
+#define CODE_PLL_VCORANGE_VCOCAP	0x10
+#define CODE_PLL_CPCTRL	0x11
+#define CODE_PLL_LPF_CP 0x12
+#define CODE_PLL_INPUT_DIV_RAT	0x17
+#define CODE_PLL_LOOP_DIV_RAT	0x18
+#define CODE_PLL_INPUT_LOOP_DIV_RAT	0x19
+#define CODE_BANDGAP_BIAS_CTRL	0x20
+#define CODE_TERMINATION_CTRL	0x21
+#define CODE_AFE_BIAS_BANDGAP_ANOLOG 0x22
+
+#define CODE_HSTXDATALANEREQUSETSTATETIME	0x70
+#define CODE_HSTXDATALANEPREPARESTATETIME	0x71
+#define CODE_HSTXDATALANEHSZEROSTATETIME	0x72
+
+/* Transmission mode between vop and MIPI controller */
+enum vid_mode_type_t {
+	NON_BURST_SYNC_PLUSE = 0,
+	NON_BURST_SYNC_EVENT,
+	BURST_MODE,
+};
+
+enum cmd_video_mode {
+	VIDEO_MODE = 0,
+	CMD_MODE,
+};
+
+/* Indicate MIPI DSI color mode */
+enum dpi_color_coding {
+	DPI_16BIT_CFG_1 = 0,
+	DPI_16BIT_CFG_2,
+	DPI_16BIT_CFG_3,
+	DPI_18BIT_CFG_1,
+	DPI_18BIT_CFG_2,
+	DPI_24BIT,
+	DPI_20BIT_YCBCR_422_LP,
+	DPI_24BIT_YCBCR_422,
+	DPI_16BIT_YCBCR_422,
+	DPI_30BIT,
+	DPI_36BIT,
+	DPI_12BIT_YCBCR_420,
+};
+
+/* Indicate which VOP the MIPI DSI use, bit or little one */
+enum  vop_id {
+	VOP_B = 0,
+	VOP_L,
+};
+
+#endif /* end of ROCKCHIP_MIPI_DSI_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram.h
new file mode 100644
index 000000000..cf2a7b7d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Rockchip Electronics Co., Ltd.
+ */
+
+#ifndef _ASM_ARCH_SDRAM_H
+#define _ASM_ARCH_SDRAM_H
+
+enum {
+	DDR4 = 0,
+	DDR3 = 0x3,
+	LPDDR2 = 0x5,
+	LPDDR3 = 0x6,
+	LPDDR4 = 0x7,
+	UNUSED = 0xFF
+};
+
+/*
+ * sys_reg2 bitfield struct
+ * [31]		row_3_4_ch1
+ * [30]		row_3_4_ch0
+ * [29:28]	chinfo
+ * [27]		rank_ch1
+ * [26:25]	col_ch1
+ * [24]		bk_ch1
+ * [23:22]	low bits of cs0_row_ch1
+ * [21:20]	low bits of cs1_row_ch1
+ * [19:18]	bw_ch1
+ * [17:16]	dbw_ch1;
+ * [15:13]	ddrtype
+ * [12]		channelnum
+ * [11]		rank_ch0
+ * [10:9]	col_ch0,
+ * [8]		bk_ch0
+ * [7:6]	low bits of cs0_row_ch0
+ * [5:4]	low bits of cs1_row_ch0
+ * [3:2]	bw_ch0
+ * [1:0]	dbw_ch0
+ */
+#define SYS_REG_DDRTYPE_SHIFT		13
+#define SYS_REG_DDRTYPE_MASK		7
+#define SYS_REG_NUM_CH_SHIFT		12
+#define SYS_REG_NUM_CH_MASK		1
+#define SYS_REG_ROW_3_4_SHIFT(ch)	(30 + (ch))
+#define SYS_REG_ROW_3_4_MASK		1
+#define SYS_REG_CHINFO_SHIFT(ch)	(28 + (ch))
+#define SYS_REG_RANK_SHIFT(ch)		(11 + (ch) * 16)
+#define SYS_REG_RANK_MASK		1
+#define SYS_REG_COL_SHIFT(ch)		(9 + (ch) * 16)
+#define SYS_REG_COL_MASK		3
+#define SYS_REG_BK_SHIFT(ch)		(8 + (ch) * 16)
+#define SYS_REG_BK_MASK			1
+#define SYS_REG_CS0_ROW_SHIFT(ch)	(6 + (ch) * 16)
+#define SYS_REG_CS0_ROW_MASK		3
+#define SYS_REG_CS1_ROW_SHIFT(ch)	(4 + (ch) * 16)
+#define SYS_REG_CS1_ROW_MASK		3
+#define SYS_REG_BW_SHIFT(ch)		(2 + (ch) * 16)
+#define SYS_REG_BW_MASK			3
+#define SYS_REG_DBW_SHIFT(ch)		((ch) * 16)
+#define SYS_REG_DBW_MASK		3
+
+/*
+ * sys_reg3 bitfield struct
+ * [7]		high bit of cs0_row_ch1
+ * [6]		high bit of cs1_row_ch1
+ * [5]		high bit of cs0_row_ch0
+ * [4]		high bit of cs1_row_ch0
+ * [3:2]	cs1_col_ch1
+ * [1:0]	cs1_col_ch0
+ */
+#define SYS_REG_VERSION_SHIFT			28
+#define SYS_REG_VERSION_MASK			0xf
+#define SYS_REG_EXTEND_CS0_ROW_SHIFT(ch)	(5 + (ch) * 2)
+#define SYS_REG_EXTEND_CS0_ROW_MASK		1
+#define SYS_REG_EXTEND_CS1_ROW_SHIFT(ch)	(4 + (ch) * 2)
+#define SYS_REG_EXTEND_CS1_ROW_MASK		1
+#define SYS_REG_CS1_COL_SHIFT(ch)		(0 + (ch) * 2)
+#define SYS_REG_CS1_COL_MASK			3
+
+/* Get sdram size decode from reg */
+size_t rockchip_sdram_size(phys_addr_t reg);
+
+/* Called by U-Boot board_init_r for Rockchip SoCs */
+int dram_init(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_common.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_common.h
new file mode 100644
index 000000000..5efa6e944
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_common.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_COMMON_H
+#define _ASM_ARCH_SDRAM_COMMON_H
+
+#ifndef MHZ
+#define MHZ		(1000 * 1000)
+#endif
+
+#define PATTERN		(0x5aa5f00f)
+
+#define MIN(a, b)	(((a) > (b)) ? (b) : (a))
+#define MAX(a, b)	(((a) > (b)) ? (a) : (b))
+
+struct sdram_cap_info {
+	unsigned int rank;
+	/* dram column number, 0 means this channel is invalid */
+	unsigned int col;
+	/* dram bank number, 3:8bank, 2:4bank */
+	unsigned int bk;
+	/* channel buswidth, 2:32bit, 1:16bit, 0:8bit */
+	unsigned int bw;
+	/* die buswidth, 2:32bit, 1:16bit, 0:8bit */
+	unsigned int dbw;
+	/*
+	 * row_3_4 = 1: 6Gb or 12Gb die
+	 * row_3_4 = 0: normal die, power of 2
+	 */
+	unsigned int row_3_4;
+	unsigned int cs0_row;
+	unsigned int cs1_row;
+	unsigned int cs0_high16bit_row;
+	unsigned int cs1_high16bit_row;
+	unsigned int ddrconfig;
+};
+
+struct sdram_base_params {
+	unsigned int ddr_freq;
+	unsigned int dramtype;
+	unsigned int num_channels;
+	unsigned int stride;
+	unsigned int odt;
+};
+
+#define DDR_SYS_REG_VERSION		(0x2)
+/*
+ * sys_reg2 bitfield struct
+ * [31]		row_3_4_ch1
+ * [30]		row_3_4_ch0
+ * [29:28]	chinfo
+ * [27]		rank_ch1
+ * [26:25]	col_ch1
+ * [24]		bk_ch1
+ * [23:22]	cs0_row_ch1
+ * [21:20]	cs1_row_ch1
+ * [19:18]	bw_ch1
+ * [17:16]	dbw_ch1;
+ * [15:13]	ddrtype
+ * [12]		channelnum
+ * [11]		rank_ch0
+ * [10:9]	col_ch0
+ * [8]		bk_ch0
+ * [7:6]	cs0_row_ch0
+ * [5:4]	cs1_row_ch0
+ * [3:2]	bw_ch0
+ * [1:0]	dbw_ch0
+ */
+#define SYS_REG_ENC_ROW_3_4(n, ch)	((n) << (30 + (ch)))
+#define SYS_REG_DEC_ROW_3_4(n, ch)	(((n) >> (30 + (ch))) & 0x1)
+#define SYS_REG_ENC_CHINFO(ch)		(1 << (28 + (ch)))
+#define SYS_REG_ENC_DDRTYPE(n)		((n) << 13)
+#define SYS_REG_DEC_DDRTYPE(n)		(((n) >> 13) & 0x7)
+#define SYS_REG_ENC_NUM_CH(n)		(((n) - 1) << 12)
+#define SYS_REG_DEC_NUM_CH(n)		(1 + (((n) >> 12) & 0x1))
+#define SYS_REG_ENC_RANK(n, ch)		(((n) - 1) << (11 + ((ch) * 16)))
+#define SYS_REG_DEC_RANK(n, ch)		(1 + (((n) >> (11 + 16 * (ch))) & 0x1))
+#define SYS_REG_ENC_COL(n, ch)		(((n) - 9) << (9 + ((ch) * 16)))
+#define SYS_REG_DEC_COL(n, ch)		(9 + (((n) >> (9 + 16 * (ch))) & 0x3))
+#define SYS_REG_ENC_BK(n, ch)		(((n) == 3 ? 0 : 1) << \
+						(8 + ((ch) * 16)))
+#define SYS_REG_DEC_BK(n, ch)		(3 - (((n) >> (8 + 16 * (ch))) & 0x1))
+#define SYS_REG_ENC_BW(n, ch)		((2 >> (n)) << (2 + ((ch) * 16)))
+#define SYS_REG_DEC_BW(n, ch)		(2 >> (((n) >> (2 + 16 * (ch))) & 0x3))
+#define SYS_REG_ENC_DBW(n, ch)		((2 >> (n)) << (0 + ((ch) * 16)))
+#define SYS_REG_DEC_DBW(n, ch)		(2 >> (((n) >> (0 + 16 * (ch))) & 0x3))
+/* sys reg 3 */
+#define SYS_REG_ENC_VERSION(n)		((n) << 28)
+#define SYS_REG_DEC_VERSION(n)		(((n) >> 28) & 0xf)
+#define SYS_REG_ENC_CS0_ROW(n, os_reg2, os_reg3, ch) do { \
+			(os_reg2) |= (((n) - 13) & 0x3) << (6 + 16 * (ch)); \
+			(os_reg3) |= ((((n) - 13) & 0x4) >> 2) << \
+				     (5 + 2 * (ch)); \
+		} while (0)
+
+#define SYS_REG_DEC_CS0_ROW(os_reg2, os_reg3, ch)	\
+		((((((os_reg2) >> (6 + 16 * (ch)) & 0x3) | \
+		 ((((os_reg3) >> (5 + 2 * (ch))) & 0x1) << 2)) + 1) & 0x7) + 12)
+
+#define SYS_REG_ENC_CS1_ROW(n, os_reg2, os_reg3, ch) do { \
+			(os_reg2) &= (~(0x3 << (4 + 16 * (ch)))); \
+			(os_reg3) &= (~(0x1 << (4 + 2 * (ch)))); \
+			(os_reg2) |= (((n) - 13) & 0x3) << (4 + 16 * (ch)); \
+			(os_reg3) |= ((((n) - 13) & 0x4) >> 2) << \
+				     (4 + 2 * (ch)); \
+		} while (0)
+
+#define SYS_REG_DEC_CS1_ROW(os_reg2, os_reg3, ch) \
+		((((((os_reg2) >> (4 + 16 * (ch)) & 0x3) | \
+		 ((((os_reg3) >> (4 + 2 * (ch))) & 0x1) << 2)) + 1) & 0x7) + 12)
+
+#define SYS_REG_ENC_CS1_COL(n, ch)	(((n) - 9) << (0 + 2 * (ch)))
+#define SYS_REG_DEC_CS1_COL(n, ch)	(9 + (((n) >> (0 + 2 * (ch))) & 0x3))
+
+void sdram_print_dram_type(unsigned char dramtype);
+void sdram_print_ddr_info(struct sdram_cap_info *cap_info,
+			  struct sdram_base_params *base);
+void sdram_print_stride(unsigned int stride);
+
+void sdram_org_config(struct sdram_cap_info *cap_info,
+		      struct sdram_base_params *base,
+		      u32 *p_os_reg2, u32 *p_os_reg3, u32 channel);
+
+int sdram_detect_bw(struct sdram_cap_info *cap_info);
+int sdram_detect_cs(struct sdram_cap_info *cap_info);
+int sdram_detect_col(struct sdram_cap_info *cap_info,
+		     u32 coltmp);
+int sdram_detect_bank(struct sdram_cap_info *cap_info,
+		      u32 coltmp, u32 bktmp);
+int sdram_detect_bg(struct sdram_cap_info *cap_info,
+		    u32 coltmp);
+int sdram_detect_dbw(struct sdram_cap_info *cap_info, u32 dram_type);
+int sdram_detect_row(struct sdram_cap_info *cap_info,
+		     u32 coltmp, u32 bktmp, u32 rowtmp);
+int sdram_detect_row_3_4(struct sdram_cap_info *cap_info,
+			 u32 coltmp, u32 bktmp);
+int sdram_detect_high_row(struct sdram_cap_info *cap_info);
+int sdram_detect_cs1_row(struct sdram_cap_info *cap_info, u32 dram_type);
+u64 sdram_get_cs_cap(struct sdram_cap_info *cap_info, u32 cs, u32 dram_type);
+void sdram_copy_to_reg(u32 *dest, const u32 *src, u32 n);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_msch.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_msch.h
new file mode 100644
index 000000000..cfb3d9cc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_msch.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_MSCH_H
+#define _ASM_ARCH_SDRAM_MSCH_H
+
+union noc_ddrtiminga0 {
+	u32 d32;
+	struct {
+		unsigned acttoact : 6;
+		unsigned reserved0 : 2;
+		unsigned rdtomiss : 6;
+		unsigned reserved1 : 2;
+		unsigned wrtomiss : 6;
+		unsigned reserved2 : 2;
+		unsigned readlatency : 8;
+	} b;
+};
+
+union noc_ddrtimingb0 {
+	u32 d32;
+	struct {
+		unsigned rdtowr : 5;
+		unsigned reserved0 : 3;
+		unsigned wrtord : 5;
+		unsigned reserved1 : 3;
+		unsigned rrd : 4;
+		unsigned reserved2 : 4;
+		unsigned faw : 6;
+		unsigned reserved3 : 2;
+	} b;
+};
+
+union noc_ddrtimingc0 {
+	u32 d32;
+	struct {
+		unsigned burstpenalty : 4;
+		unsigned reserved0 : 4;
+		unsigned wrtomwr : 6;
+		unsigned reserved1 : 18;
+	} b;
+};
+
+union noc_devtodev0 {
+	u32 d32;
+	struct {
+		unsigned busrdtord : 3;
+		unsigned reserved0 : 1;
+		unsigned busrdtowr : 3;
+		unsigned reserved1 : 1;
+		unsigned buswrtord : 3;
+		unsigned reserved2 : 1;
+		unsigned buswrtowr : 3;
+		unsigned reserved3 : 17;
+	} b;
+};
+
+union noc_ddrmode {
+	u32 d32;
+	struct {
+		unsigned autoprecharge : 1;
+		unsigned bypassfiltering : 1;
+		unsigned fawbank : 1;
+		unsigned burstsize : 2;
+		unsigned mwrsize : 2;
+		unsigned reserved2 : 1;
+		unsigned forceorder : 8;
+		unsigned forceorderstate : 8;
+		unsigned reserved3 : 8;
+	} b;
+};
+
+union noc_ddr4timing {
+	u32 d32;
+	struct {
+		unsigned ccdl : 3;
+		unsigned wrtordl : 5;
+		unsigned rrdl : 4;
+		unsigned reserved1 : 20;
+	} b;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_pctl_px30.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_pctl_px30.h
new file mode 100644
index 000000000..3a3657789
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_pctl_px30.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_PCTL_PX30_H
+#define _ASM_ARCH_SDRAM_PCTL_PX30_H
+#include <asm/arch-rockchip/sdram_common.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct ddr_pctl_regs {
+	u32 pctl[30][2];
+};
+
+/* ddr pctl registers define */
+#define DDR_PCTL2_MSTR			0x0
+#define DDR_PCTL2_STAT			0x4
+#define DDR_PCTL2_MSTR1			0x8
+#define DDR_PCTL2_MRCTRL0		0x10
+#define DDR_PCTL2_MRCTRL1		0x14
+#define DDR_PCTL2_MRSTAT		0x18
+#define DDR_PCTL2_MRCTRL2		0x1c
+#define DDR_PCTL2_DERATEEN		0x20
+#define DDR_PCTL2_DERATEINT		0x24
+#define DDR_PCTL2_PWRCTL		0x30
+#define DDR_PCTL2_PWRTMG		0x34
+#define DDR_PCTL2_HWLPCTL		0x38
+#define DDR_PCTL2_RFSHCTL0		0x50
+#define DDR_PCTL2_RFSHCTL1		0x54
+#define DDR_PCTL2_RFSHCTL2		0x58
+#define DDR_PCTL2_RFSHCTL4		0x5c
+#define DDR_PCTL2_RFSHCTL3		0x60
+#define DDR_PCTL2_RFSHTMG		0x64
+#define DDR_PCTL2_RFSHTMG1		0x68
+#define DDR_PCTL2_RFSHCTL5		0x6c
+#define DDR_PCTL2_INIT0			0xd0
+#define DDR_PCTL2_INIT1			0xd4
+#define DDR_PCTL2_INIT2			0xd8
+#define DDR_PCTL2_INIT3			0xdc
+#define DDR_PCTL2_INIT4			0xe0
+#define DDR_PCTL2_INIT5			0xe4
+#define DDR_PCTL2_INIT6			0xe8
+#define DDR_PCTL2_INIT7			0xec
+#define DDR_PCTL2_DIMMCTL		0xf0
+#define DDR_PCTL2_RANKCTL		0xf4
+#define DDR_PCTL2_CHCTL			0xfc
+#define DDR_PCTL2_DRAMTMG0		0x100
+#define DDR_PCTL2_DRAMTMG1		0x104
+#define DDR_PCTL2_DRAMTMG2		0x108
+#define DDR_PCTL2_DRAMTMG3		0x10c
+#define DDR_PCTL2_DRAMTMG4		0x110
+#define DDR_PCTL2_DRAMTMG5		0x114
+#define DDR_PCTL2_DRAMTMG6		0x118
+#define DDR_PCTL2_DRAMTMG7		0x11c
+#define DDR_PCTL2_DRAMTMG8		0x120
+#define DDR_PCTL2_DRAMTMG9		0x124
+#define DDR_PCTL2_DRAMTMG10		0x128
+#define DDR_PCTL2_DRAMTMG11		0x12c
+#define DDR_PCTL2_DRAMTMG12		0x130
+#define DDR_PCTL2_DRAMTMG13		0x134
+#define DDR_PCTL2_DRAMTMG14		0x138
+#define DDR_PCTL2_DRAMTMG15		0x13c
+#define DDR_PCTL2_DRAMTMG16		0x140
+#define DDR_PCTL2_ZQCTL0		0x180
+#define DDR_PCTL2_ZQCTL1		0x184
+#define DDR_PCTL2_ZQCTL2		0x188
+#define DDR_PCTL2_ZQSTAT		0x18c
+#define DDR_PCTL2_DFITMG0		0x190
+#define DDR_PCTL2_DFITMG1		0x194
+#define DDR_PCTL2_DFILPCFG0		0x198
+#define DDR_PCTL2_DFILPCFG1		0x19c
+#define DDR_PCTL2_DFIUPD0		0x1a0
+#define DDR_PCTL2_DFIUPD1		0x1a4
+#define DDR_PCTL2_DFIUPD2		0x1a8
+#define DDR_PCTL2_DFIMISC		0x1b0
+#define DDR_PCTL2_DFITMG2		0x1b4
+#define DDR_PCTL2_DFITMG3		0x1b8
+#define DDR_PCTL2_DFISTAT		0x1bc
+#define DDR_PCTL2_DBICTL		0x1c0
+#define DDR_PCTL2_ADDRMAP0		0x200
+#define DDR_PCTL2_ADDRMAP1		0x204
+#define DDR_PCTL2_ADDRMAP2		0x208
+#define DDR_PCTL2_ADDRMAP3		0x20c
+#define DDR_PCTL2_ADDRMAP4		0x210
+#define DDR_PCTL2_ADDRMAP5		0x214
+#define DDR_PCTL2_ADDRMAP6		0x218
+#define DDR_PCTL2_ADDRMAP7		0x21c
+#define DDR_PCTL2_ADDRMAP8		0x220
+#define DDR_PCTL2_ADDRMAP9		0x224
+#define DDR_PCTL2_ADDRMAP10		0x228
+#define DDR_PCTL2_ADDRMAP11		0x22c
+#define DDR_PCTL2_ODTCFG		0x240
+#define DDR_PCTL2_ODTMAP		0x244
+#define DDR_PCTL2_SCHED			0x250
+#define DDR_PCTL2_SCHED1		0x254
+#define DDR_PCTL2_PERFHPR1		0x25c
+#define DDR_PCTL2_PERFLPR1		0x264
+#define DDR_PCTL2_PERFWR1		0x26c
+#define DDR_PCTL2_DQMAP0		0x280
+#define DDR_PCTL2_DQMAP1		0x284
+#define DDR_PCTL2_DQMAP2		0x288
+#define DDR_PCTL2_DQMAP3		0x28c
+#define DDR_PCTL2_DQMAP4		0x290
+#define DDR_PCTL2_DQMAP5		0x294
+#define DDR_PCTL2_DBG0			0x300
+#define DDR_PCTL2_DBG1			0x304
+#define DDR_PCTL2_DBGCAM		0x308
+#define DDR_PCTL2_DBGCMD		0x30c
+#define DDR_PCTL2_DBGSTAT		0x310
+#define DDR_PCTL2_SWCTL			0x320
+#define DDR_PCTL2_SWSTAT		0x324
+#define DDR_PCTL2_POISONCFG		0x36c
+#define DDR_PCTL2_POISONSTAT		0x370
+#define DDR_PCTL2_ADVECCINDEX		0x374
+#define DDR_PCTL2_ADVECCSTAT		0x378
+#define DDR_PCTL2_PSTAT			0x3fc
+#define DDR_PCTL2_PCCFG			0x400
+#define DDR_PCTL2_PCFGR_n		0x404
+#define DDR_PCTL2_PCFGW_n		0x408
+#define DDR_PCTL2_PCTRL_n		0x490
+
+/* PCTL2_MRSTAT */
+#define MR_WR_BUSY			BIT(0)
+
+void pctl_read_mr(void __iomem *pctl_base, u32 rank, u32 mr_num);
+int pctl_write_mr(void __iomem *pctl_base, u32 rank, u32 mr_num, u32 arg,
+		  u32 dramtype);
+int pctl_write_vrefdq(void __iomem *pctl_base, u32 rank, u32 vrefrate,
+		      u32 dramtype);
+
+u32 pctl_dis_zqcs_aref(void __iomem *pctl_base);
+void pctl_rest_zqcs_aref(void __iomem *pctl_base, u32 dis_auto_zq);
+
+u32 pctl_remodify_sdram_params(struct ddr_pctl_regs *pctl_regs,
+			       struct sdram_cap_info *cap_info,
+			       u32 dram_type);
+int pctl_cfg(void __iomem *pctl_base, struct ddr_pctl_regs *pctl_regs,
+	     u32 sr_idle, u32 pd_idle);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_phy_px30.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_phy_px30.h
new file mode 100644
index 000000000..a033a1853
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_phy_px30.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_PHY_PX30_H
+#define _ASM_ARCH_SDRAM_PHY_PX30_H
+#include <asm/arch-rockchip/sdram_common.h>
+#include <asm/arch-rockchip/sdram_phy_ron_rtt_px30.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct ddr_phy_regs {
+	u32 phy[5][2];
+};
+
+#define PHY_REG(base, n)		((base) + 4 * (n))
+
+/* PHY_REG0 */
+#define DIGITAL_DERESET			BIT(3)
+#define ANALOG_DERESET			BIT(2)
+#define DIGITAL_RESET			(0 << 3)
+#define ANALOG_RESET			(0 << 2)
+
+/* PHY_REG1 */
+#define PHY_DDR2			(0)
+#define PHY_LPDDR2			(1)
+#define PHY_DDR3			(2)
+#define PHY_LPDDR3			(3)
+#define PHY_DDR4			(4)
+#define PHY_BL_4			(0 << 2)
+#define PHY_BL_8			BIT(2)
+
+/* PHY_REG2 */
+#define PHY_DTT_EN			BIT(0)
+#define PHY_DTT_DISB			(0 << 0)
+#define PHY_WRITE_LEVELING_EN		BIT(2)
+#define PHY_WRITE_LEVELING_DISB		(0 << 2)
+#define PHY_SELECT_CS0			(2)
+#define PHY_SELECT_CS1			(1)
+#define PHY_SELECT_CS0_1		(0)
+#define PHY_WRITE_LEVELING_SELECTCS(n)	((n) << 6)
+#define PHY_DATA_TRAINING_SELECTCS(n)	((n) << 4)
+
+struct ddr_phy_skew {
+	u32 a0_a1_skew[15];
+	u32 cs0_dm0_skew[11];
+	u32 cs0_dm1_skew[11];
+	u32 cs0_dm2_skew[11];
+	u32 cs0_dm3_skew[11];
+	u32 cs1_dm0_skew[11];
+	u32 cs1_dm1_skew[11];
+	u32 cs1_dm2_skew[11];
+	u32 cs1_dm3_skew[11];
+};
+
+void phy_soft_reset(void __iomem *phy_base);
+void phy_dram_set_bw(void __iomem *phy_base, u32 bw);
+void phy_cfg(void __iomem *phy_base,
+	     struct ddr_phy_regs *phy_regs, struct ddr_phy_skew *skew,
+	     struct sdram_base_params *base, u32 bw);
+int phy_data_training(void __iomem *phy_base, u32 cs, u32 dramtype);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_phy_ron_rtt_px30.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_phy_ron_rtt_px30.h
new file mode 100644
index 000000000..9c1523204
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_phy_ron_rtt_px30.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_PHY_RON_RTT_PX30_H
+#define _ASM_ARCH_SDRAM_PHY_RON_RTT_PX30_H
+
+#define PHY_DDR3_RON_RTT_DISABLE	(0)
+#define PHY_DDR3_RON_RTT_451ohm		(1)
+#define PHY_DDR3_RON_RTT_225ohm		(2)
+#define PHY_DDR3_RON_RTT_150ohm		(3)
+#define PHY_DDR3_RON_RTT_112ohm		(4)
+#define PHY_DDR3_RON_RTT_90ohm		(5)
+#define PHY_DDR3_RON_RTT_75ohm		(6)
+#define PHY_DDR3_RON_RTT_64ohm		(7)
+#define PHY_DDR3_RON_RTT_56ohm		(16)
+#define PHY_DDR3_RON_RTT_50ohm		(17)
+#define PHY_DDR3_RON_RTT_45ohm		(18)
+#define PHY_DDR3_RON_RTT_41ohm		(19)
+#define PHY_DDR3_RON_RTT_37ohm		(20)
+#define PHY_DDR3_RON_RTT_34ohm		(21)
+#define PHY_DDR3_RON_RTT_33ohm		(22)
+#define PHY_DDR3_RON_RTT_30ohm		(23)
+#define PHY_DDR3_RON_RTT_28ohm		(24)
+#define PHY_DDR3_RON_RTT_26ohm		(25)
+#define PHY_DDR3_RON_RTT_25ohm		(26)
+#define PHY_DDR3_RON_RTT_23ohm		(27)
+#define PHY_DDR3_RON_RTT_22ohm		(28)
+#define PHY_DDR3_RON_RTT_21ohm		(29)
+#define PHY_DDR3_RON_RTT_20ohm		(30)
+#define PHY_DDR3_RON_RTT_19ohm		(31)
+
+#define PHY_DDR4_LPDDR3_RON_RTT_DISABLE	(0)
+#define PHY_DDR4_LPDDR3_RON_RTT_480ohm	(1)
+#define PHY_DDR4_LPDDR3_RON_RTT_240ohm	(2)
+#define PHY_DDR4_LPDDR3_RON_RTT_160ohm	(3)
+#define PHY_DDR4_LPDDR3_RON_RTT_120ohm	(4)
+#define PHY_DDR4_LPDDR3_RON_RTT_96ohm	(5)
+#define PHY_DDR4_LPDDR3_RON_RTT_80ohm	(6)
+#define PHY_DDR4_LPDDR3_RON_RTT_68ohm	(7)
+#define PHY_DDR4_LPDDR3_RON_RTT_60ohm	(16)
+#define PHY_DDR4_LPDDR3_RON_RTT_53ohm	(17)
+#define PHY_DDR4_LPDDR3_RON_RTT_48ohm	(18)
+#define PHY_DDR4_LPDDR3_RON_RTT_43ohm	(19)
+#define PHY_DDR4_LPDDR3_RON_RTT_40ohm	(20)
+#define PHY_DDR4_LPDDR3_RON_RTT_37ohm	(21)
+#define PHY_DDR4_LPDDR3_RON_RTT_34ohm	(22)
+#define PHY_DDR4_LPDDR3_RON_RTT_32ohm	(23)
+#define PHY_DDR4_LPDDR3_RON_RTT_30ohm	(24)
+#define PHY_DDR4_LPDDR3_RON_RTT_28ohm	(25)
+#define PHY_DDR4_LPDDR3_RON_RTT_26ohm	(26)
+#define PHY_DDR4_LPDDR3_RON_RTT_25ohm	(27)
+#define PHY_DDR4_LPDDR3_RON_RTT_24ohm	(28)
+#define PHY_DDR4_LPDDR3_RON_RTT_22ohm	(29)
+#define PHY_DDR4_LPDDR3_RON_RTT_21ohm	(30)
+#define PHY_DDR4_LPDDR3_RON_RTT_20ohm	(31)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_px30.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_px30.h
new file mode 100644
index 000000000..2ab8e97ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_px30.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_PX30_H
+#define _ASM_ARCH_SDRAM_PX30_H
+#include <asm/arch-rockchip/sdram_common.h>
+#include <asm/arch-rockchip/sdram_msch.h>
+#include <asm/arch-rockchip/sdram_pctl_px30.h>
+#include <asm/arch-rockchip/sdram_phy_px30.h>
+#include <asm/arch-rockchip/sdram_phy_ron_rtt_px30.h>
+
+#define SR_IDLE				93
+#define PD_IDLE				13
+
+/* PMUGRF */
+#define PMUGRF_OS_REG0			(0x200)
+#define PMUGRF_OS_REG(n)		(PMUGRF_OS_REG0 + (n) * 4)
+
+/* DDR GRF */
+#define DDR_GRF_CON(n)			(0 + (n) * 4)
+#define DDR_GRF_STATUS_BASE		(0X100)
+#define DDR_GRF_STATUS(n)		(DDR_GRF_STATUS_BASE + (n) * 4)
+#define DDR_GRF_LP_CON			(0x20)
+
+#define SPLIT_MODE_32_L16_VALID		(0)
+#define SPLIT_MODE_32_H16_VALID		(1)
+#define SPLIT_MODE_16_L8_VALID		(2)
+#define SPLIT_MODE_16_H8_VALID		(3)
+
+#define DDR_GRF_SPLIT_CON		(0x8)
+#define SPLIT_MODE_MASK			(0x3)
+#define SPLIT_MODE_OFFSET		(9)
+#define SPLIT_BYPASS_MASK		(1)
+#define SPLIT_BYPASS_OFFSET		(8)
+#define SPLIT_SIZE_MASK			(0xff)
+#define SPLIT_SIZE_OFFSET		(0)
+
+/* CRU define */
+/* CRU_PLL_CON0 */
+#define PB(n)				((0x1 << (15 + 16)) | ((n) << 15))
+#define POSTDIV1(n)			((0x7 << (12 + 16)) | ((n) << 12))
+#define FBDIV(n)			((0xFFF << 16) | (n))
+
+/* CRU_PLL_CON1 */
+#define RSTMODE(n)			((0x1 << (15 + 16)) | ((n) << 15))
+#define RST(n)				((0x1 << (14 + 16)) | ((n) << 14))
+#define PD(n)				((0x1 << (13 + 16)) | ((n) << 13))
+#define DSMPD(n)			((0x1 << (12 + 16)) | ((n) << 12))
+#define LOCK(n)				(((n) >> 10) & 0x1)
+#define POSTDIV2(n)			((0x7 << (6 + 16)) | ((n) << 6))
+#define REFDIV(n)			((0x3F << 16) | (n))
+
+/* CRU_MODE */
+#define CLOCK_FROM_XIN_OSC		(0)
+#define CLOCK_FROM_PLL			(1)
+#define CLOCK_FROM_RTC_32K		(2)
+#define DPLL_MODE(n)			((0x3 << (4 + 16)) | ((n) << 4))
+
+/* CRU_SOFTRESET_CON1 */
+#define upctl2_psrstn_req(n)		(((0x1 << 6) << 16) | ((n) << 6))
+#define upctl2_asrstn_req(n)		(((0x1 << 5) << 16) | ((n) << 5))
+#define upctl2_srstn_req(n)		(((0x1 << 4) << 16) | ((n) << 4))
+
+/* CRU_SOFTRESET_CON2 */
+#define ddrphy_psrstn_req(n)		(((0x1 << 2) << 16) | ((n) << 2))
+#define ddrphy_srstn_req(n)		(((0x1 << 0) << 16) | ((n) << 0))
+
+/* CRU register */
+#define CRU_PLL_CON(pll_id, n)		((pll_id)  * 0x20 + (n) * 4)
+#define CRU_MODE			(0xa0)
+#define CRU_GLB_CNT_TH			(0xb0)
+#define CRU_CLKSEL_CON_BASE		0x100
+#define CRU_CLKSELS_CON(i)		(CRU_CLKSEL_CON_BASE + ((i) * 4))
+#define CRU_CLKGATE_CON_BASE		0x200
+#define CRU_CLKGATE_CON(i)		(CRU_CLKGATE_CON_BASE + ((i) * 4))
+#define CRU_CLKSFTRST_CON_BASE		0x300
+#define CRU_CLKSFTRST_CON(i)		(CRU_CLKSFTRST_CON_BASE + ((i) * 4))
+
+struct px30_ddr_grf_regs {
+	u32 ddr_grf_con[4];
+	u32 reserved1[(0x20 - 0x10) / 4];
+	u32 ddr_grf_lp_con;
+	u32 reserved2[(0x100 - 0x24) / 4];
+	u32 ddr_grf_status[11];
+};
+
+struct msch_regs {
+	u32 coreid;
+	u32 revisionid;
+	u32 deviceconf;
+	u32 devicesize;
+	u32 ddrtiminga0;
+	u32 ddrtimingb0;
+	u32 ddrtimingc0;
+	u32 devtodev0;
+	u32 reserved1[(0x110 - 0x20) / 4];
+	u32 ddrmode;
+	u32 ddr4timing;
+	u32 reserved2[(0x1000 - 0x118) / 4];
+	u32 agingx0;
+	u32 reserved3[(0x1040 - 0x1004) / 4];
+	u32 aging0;
+	u32 aging1;
+	u32 aging2;
+	u32 aging3;
+};
+
+struct sdram_msch_timings {
+	union noc_ddrtiminga0 ddrtiminga0;
+	union noc_ddrtimingb0 ddrtimingb0;
+	union noc_ddrtimingc0 ddrtimingc0;
+	union noc_devtodev0 devtodev0;
+	union noc_ddrmode ddrmode;
+	union noc_ddr4timing ddr4timing;
+	u32 agingx0;
+};
+
+struct px30_sdram_channel {
+	struct sdram_cap_info cap_info;
+	struct sdram_msch_timings noc_timings;
+};
+
+struct px30_sdram_params {
+	struct px30_sdram_channel ch;
+	struct sdram_base_params base;
+	struct ddr_pctl_regs pctl_regs;
+	struct ddr_phy_regs phy_regs;
+	struct ddr_phy_skew *skew;
+};
+
+int sdram_init(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3036.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3036.h
new file mode 100644
index 000000000..46298165f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3036.h
@@ -0,0 +1,338 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ */
+#ifndef _ASM_ARCH_SDRAM_RK3036_H
+#define _ASM_ARCH_SDRAM_RK3036_H
+
+struct rk3036_ddr_pctl {
+	u32 scfg;
+	u32 sctl;
+	u32 stat;
+	u32 intrstat;
+	u32 reserved0[12];
+	u32 mcmd;
+	u32 powctl;
+	u32 powstat;
+	u32 cmdtstat;
+	u32 cmdtstaten;
+	u32 reserved1[3];
+	u32 mrrcfg0;
+	u32 mrrstat0;
+	u32 mrrstat1;
+	u32 reserved2[4];
+	u32 mcfg1;
+	u32 mcfg;
+	u32 ppcfg;
+	u32 mstat;
+	u32 lpddr2zqcfg;
+	u32 reserved3;
+	u32 dtupdes;
+	u32 dtuna;
+	u32 dtune;
+	u32 dtuprd0;
+	u32 dtuprd1;
+	u32 dtuprd2;
+	u32 dtuprd3;
+	u32 dtuawdt;
+	u32 reserved4[3];
+	u32 togcnt1u;
+	u32 tinit;
+	u32 trsth;
+	u32 togcnt100n;
+	u32 trefi;
+	u32 tmrd;
+	u32 trfc;
+	u32 trp;
+	u32 trtw;
+	u32 tal;
+	u32 tcl;
+	u32 tcwl;
+	u32 tras;
+	u32 trc;
+	u32 trcd;
+	u32 trrd;
+	u32 trtp;
+	u32 twr;
+	u32 twtr;
+	u32 texsr;
+	u32 txp;
+	u32 txpdll;
+	u32 tzqcs;
+	u32 tzqcsi;
+	u32 tdqs;
+	u32 tcksre;
+	u32 tcksrx;
+	u32 tcke;
+	u32 tmod;
+	u32 trstl;
+	u32 tzqcl;
+	u32 tmrr;
+	u32 tckesr;
+	u32 reserved5[47];
+	u32 dtuwactl;
+	u32 dturactl;
+	u32 dtucfg;
+	u32 dtuectl;
+	u32 dtuwd0;
+	u32 dtuwd1;
+	u32 dtuwd2;
+	u32 dtuwd3;
+	u32 dtuwdm;
+	u32 dturd0;
+	u32 dturd1;
+	u32 dturd2;
+	u32 dturd3;
+	u32 dtulfsrwd;
+	u32 dtulfsrrd;
+	u32 dtueaf;
+	u32 dfitctrldelay;
+	u32 dfiodtcfg;
+	u32 dfiodtcfg1;
+	u32 dfiodtrankmap;
+	u32 dfitphywrdata;
+	u32 dfitphywrlat;
+	u32 reserved7[2];
+	u32 dfitrddataen;
+	u32 dfitphyrdlat;
+	u32 reserved8[2];
+	u32 dfitphyupdtype0;
+	u32 dfitphyupdtype1;
+	u32 dfitphyupdtype2;
+	u32 dfitphyupdtype3;
+	u32 dfitctrlupdmin;
+	u32 dfitctrlupdmax;
+	u32 dfitctrlupddly;
+	u32 reserved9;
+	u32 dfiupdcfg;
+	u32 dfitrefmski;
+	u32 dfitctrlupdi;
+	u32 reserved10[4];
+	u32 dfitrcfg0;
+	u32 dfitrstat0;
+	u32 dfitrwrlvlen;
+	u32 dfitrrdlvlen;
+	u32 dfitrrdlvlgateen;
+	u32 dfiststat0;
+	u32 dfistcfg0;
+	u32 dfistcfg1;
+	u32 reserved11;
+	u32 dfitdramclken;
+	u32 dfitdramclkdis;
+	u32 dfistcfg2;
+	u32 dfistparclr;
+	u32 dfistparlog;
+	u32 reserved12[3];
+	u32 dfilpcfg0;
+	u32 reserved13[3];
+	u32 dfitrwrlvlresp0;
+	u32 dfitrwrlvlresp1;
+	u32 dfitrwrlvlresp2;
+	u32 dfitrrdlvlresp0;
+	u32 dfitrrdlvlresp1;
+	u32 dfitrrdlvlresp2;
+	u32 dfitrwrlvldelay0;
+	u32 dfitrwrlvldelay1;
+	u32 dfitrwrlvldelay2;
+	u32 dfitrrdlvldelay0;
+	u32 dfitrrdlvldelay1;
+	u32 dfitrrdlvldelay2;
+	u32 dfitrrdlvlgatedelay0;
+	u32 dfitrrdlvlgatedelay1;
+	u32 dfitrrdlvlgatedelay2;
+	u32 dfitrcmd;
+	u32 reserved14[46];
+	u32 ipvr;
+	u32 iptr;
+};
+check_member(rk3036_ddr_pctl, iptr, 0x03fc);
+
+struct rk3036_ddr_phy {
+	u32 ddrphy_reg1;
+	u32 ddrphy_reg3;
+	u32 ddrphy_reg2;
+	u32 reserve[11];
+	u32 ddrphy_reg4a;
+	u32 ddrphy_reg4b;
+	u32 reserve1[5];
+	u32 ddrphy_reg16;
+	u32 reserve2;
+	u32 ddrphy_reg18;
+	u32 ddrphy_reg19;
+	u32 reserve3;
+	u32 ddrphy_reg21;
+	u32 reserve4;
+	u32 ddrphy_reg22;
+	u32 reserve5[3];
+	u32 ddrphy_reg25;
+	u32 ddrphy_reg26;
+	u32 ddrphy_reg27;
+	u32 ddrphy_reg28;
+	u32 reserve6[17];
+	u32 ddrphy_reg6;
+	u32 ddrphy_reg7;
+	u32 reserve7;
+	u32 ddrphy_reg8;
+	u32 ddrphy_reg0e4;
+	u32 reserve8[11];
+	u32 ddrphy_reg9;
+	u32 ddrphy_reg10;
+	u32 reserve9;
+	u32 ddrphy_reg11;
+	u32 ddrphy_reg124;
+	u32 reserve10[38];
+	u32 ddrphy_reg29;
+	u32 reserve11[40];
+	u32 ddrphy_reg264;
+	u32 reserve12[18];
+	u32 ddrphy_reg2a;
+	u32 reserve13[4];
+	u32 ddrphy_reg30;
+	u32 ddrphy_reg31;
+	u32 ddrphy_reg32;
+	u32 ddrphy_reg33;
+	u32 ddrphy_reg34;
+	u32 ddrphy_reg35;
+	u32 ddrphy_reg36;
+	u32 ddrphy_reg37;
+	u32 ddrphy_reg38;
+	u32 ddrphy_reg39;
+	u32 ddrphy_reg40;
+	u32 ddrphy_reg41;
+	u32 ddrphy_reg42;
+	u32 ddrphy_reg43;
+	u32 ddrphy_reg44;
+	u32 ddrphy_reg45;
+	u32 ddrphy_reg46;
+	u32 ddrphy_reg47;
+	u32 ddrphy_reg48;
+	u32 ddrphy_reg49;
+	u32 ddrphy_reg50;
+	u32 ddrphy_reg51;
+	u32 ddrphy_reg52;
+	u32 ddrphy_reg53;
+	u32 reserve14;
+	u32 ddrphy_reg54;
+	u32 ddrphy_reg55;
+	u32 ddrphy_reg56;
+	u32 ddrphy_reg57;
+	u32 ddrphy_reg58;
+	u32 ddrphy_reg59;
+	u32 ddrphy_reg5a;
+	u32 ddrphy_reg5b;
+	u32 ddrphy_reg5c;
+	u32 ddrphy_reg5d;
+	u32 ddrphy_reg5e;
+	u32 reserve15[28];
+	u32 ddrphy_reg5f;
+	u32 reserve16[6];
+	u32 ddrphy_reg60;
+	u32 ddrphy_reg61;
+	u32 ddrphy_reg62;
+};
+check_member(rk3036_ddr_phy, ddrphy_reg62, 0x03e8);
+
+struct rk3036_pctl_timing {
+	u32 togcnt1u;
+	u32 tinit;
+	u32 trsth;
+	u32 togcnt100n;
+	u32 trefi;
+	u32 tmrd;
+	u32 trfc;
+	u32 trp;
+	u32 trtw;
+	u32 tal;
+	u32 tcl;
+	u32 tcwl;
+	u32 tras;
+	u32 trc;
+	u32 trcd;
+	u32 trrd;
+	u32 trtp;
+	u32 twr;
+	u32 twtr;
+	u32 texsr;
+	u32 txp;
+	u32 txpdll;
+	u32 tzqcs;
+	u32 tzqcsi;
+	u32 tdqs;
+	u32 tcksre;
+	u32 tcksrx;
+	u32 tcke;
+	u32 tmod;
+	u32 trstl;
+	u32 tzqcl;
+	u32 tmrr;
+	u32 tckesr;
+	u32 tdpd;
+};
+
+struct rk3036_phy_timing {
+	u32 mr[4];
+	u32 bl;
+	u32 cl_al;
+};
+
+typedef union {
+	u32 noc_timing;
+	struct {
+		u32 acttoact:6;
+		u32 rdtomiss:6;
+		u32 wrtomiss:6;
+		u32 burstlen:3;
+		u32 rdtowr:5;
+		u32 wrtord:5;
+		u32 bwratio:1;
+	};
+} rk3036_noc_timing;
+
+struct rk3036_ddr_timing {
+	u32 freq;
+	struct rk3036_pctl_timing pctl_timing;
+	struct rk3036_phy_timing phy_timing;
+	rk3036_noc_timing noc_timing;
+};
+
+struct rk3036_service_sys {
+	u32 id_coreid;
+	u32 id_revisionid;
+	u32 ddrconf;
+	u32 ddrtiming;
+	u32 ddrmode;
+	u32 readlatency;
+};
+
+struct rk3036_ddr_config {
+	/*
+	 * 000: lpddr
+	 * 001: ddr
+	 * 010: ddr2
+	 * 011: ddr3
+	 * 100: lpddr2-s2
+	 * 101: lpddr2-s4
+	 * 110: lpddr3
+	 */
+	u32 ddr_type;
+	u32 rank;
+	u32 cs0_row;
+	u32 cs1_row;
+
+	/* 2: 4bank, 3: 8bank */
+	u32 bank;
+	u32 col;
+
+	/* bw(0: 8bit, 1: 16bit, 2: 32bit) */
+	u32 bw;
+};
+
+/* rk3036 sdram initial */
+void sdram_init(void);
+
+/* get ddr die config, implement in specific board */
+void get_ddr_config(struct rk3036_ddr_config *config);
+
+/* get ddr size on board */
+size_t sdram_size(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk322x.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk322x.h
new file mode 100644
index 000000000..6f6c5c995
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk322x.h
@@ -0,0 +1,575 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+#ifndef _ASM_ARCH_SDRAM_RK322X_H
+#define _ASM_ARCH_SDRAM_RK322X_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct rk322x_sdram_channel {
+	/*
+	 * bit width in address, eg:
+	 * 8 banks using 3 bit to address,
+	 * 2 cs using 1 bit to address.
+	 */
+	u8 rank;
+	u8 col;
+	u8 bk;
+	u8 bw;
+	u8 dbw;
+	u8 row_3_4;
+	u8 cs0_row;
+	u8 cs1_row;
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	/*
+	 * For of-platdata, which would otherwise convert this into two
+	 * byte-swapped integers. With a size of 9 bytes, this struct will
+	 * appear in of-platdata as a byte array.
+	 *
+	 * If OF_PLATDATA enabled, need to add a dummy byte in dts.(i.e 0xff)
+	 */
+	u8 dummy;
+#endif
+};
+
+struct rk322x_ddr_pctl {
+	u32 scfg;
+	u32 sctl;
+	u32 stat;
+	u32 intrstat;
+	u32 reserved0[(0x40 - 0x10) / 4];
+	u32 mcmd;
+	u32 powctl;
+	u32 powstat;
+	u32 cmdtstat;
+	u32 cmdtstaten;
+	u32 reserved1[(0x60 - 0x54) / 4];
+	u32 mrrcfg0;
+	u32 mrrstat0;
+	u32 mrrstat1;
+	u32 reserved2[(0x7c - 0x6c) / 4];
+
+	u32 mcfg1;
+	u32 mcfg;
+	u32 ppcfg;
+	u32 mstat;
+	u32 lpddr2zqcfg;
+	u32 reserved3;
+
+	u32 dtupdes;
+	u32 dtuna;
+	u32 dtune;
+	u32 dtuprd0;
+	u32 dtuprd1;
+	u32 dtuprd2;
+	u32 dtuprd3;
+	u32 dtuawdt;
+	u32 reserved4[(0xc0 - 0xb4) / 4];
+
+	u32 togcnt1u;
+	u32 tinit;
+	u32 trsth;
+	u32 togcnt100n;
+	u32 trefi;
+	u32 tmrd;
+	u32 trfc;
+	u32 trp;
+	u32 trtw;
+	u32 tal;
+	u32 tcl;
+	u32 tcwl;
+	u32 tras;
+	u32 trc;
+	u32 trcd;
+	u32 trrd;
+	u32 trtp;
+	u32 twr;
+	u32 twtr;
+	u32 texsr;
+	u32 txp;
+	u32 txpdll;
+	u32 tzqcs;
+	u32 tzqcsi;
+	u32 tdqs;
+	u32 tcksre;
+	u32 tcksrx;
+	u32 tcke;
+	u32 tmod;
+	u32 trstl;
+	u32 tzqcl;
+	u32 tmrr;
+	u32 tckesr;
+	u32 tdpd;
+	u32 tref_mem_ddr3;
+	u32 reserved5[(0x180 - 0x14c) / 4];
+	u32 ecccfg;
+	u32 ecctst;
+	u32 eccclr;
+	u32 ecclog;
+	u32 reserved6[(0x200 - 0x190) / 4];
+	u32 dtuwactl;
+	u32 dturactl;
+	u32 dtucfg;
+	u32 dtuectl;
+	u32 dtuwd0;
+	u32 dtuwd1;
+	u32 dtuwd2;
+	u32 dtuwd3;
+	u32 dtuwdm;
+	u32 dturd0;
+	u32 dturd1;
+	u32 dturd2;
+	u32 dturd3;
+	u32 dtulfsrwd;
+	u32 dtulfsrrd;
+	u32 dtueaf;
+	/* dfi control registers */
+	u32 dfitctrldelay;
+	u32 dfiodtcfg;
+	u32 dfiodtcfg1;
+	u32 dfiodtrankmap;
+	/* dfi write data registers */
+	u32 dfitphywrdata;
+	u32 dfitphywrlat;
+	u32 reserved7[(0x260 - 0x258) / 4];
+	u32 dfitrddataen;
+	u32 dfitphyrdlat;
+	u32 reserved8[(0x270 - 0x268) / 4];
+	u32 dfitphyupdtype0;
+	u32 dfitphyupdtype1;
+	u32 dfitphyupdtype2;
+	u32 dfitphyupdtype3;
+	u32 dfitctrlupdmin;
+	u32 dfitctrlupdmax;
+	u32 dfitctrlupddly;
+	u32 reserved9;
+	u32 dfiupdcfg;
+	u32 dfitrefmski;
+	u32 dfitctrlupdi;
+	u32 reserved10[(0x2ac - 0x29c) / 4];
+	u32 dfitrcfg0;
+	u32 dfitrstat0;
+	u32 dfitrwrlvlen;
+	u32 dfitrrdlvlen;
+	u32 dfitrrdlvlgateen;
+	u32 dfiststat0;
+	u32 dfistcfg0;
+	u32 dfistcfg1;
+	u32 reserved11;
+	u32 dfitdramclken;
+	u32 dfitdramclkdis;
+	u32 dfistcfg2;
+	u32 dfistparclr;
+	u32 dfistparlog;
+	u32 reserved12[(0x2f0 - 0x2e4) / 4];
+
+	u32 dfilpcfg0;
+	u32 reserved13[(0x300 - 0x2f4) / 4];
+	u32 dfitrwrlvlresp0;
+	u32 dfitrwrlvlresp1;
+	u32 dfitrwrlvlresp2;
+	u32 dfitrrdlvlresp0;
+	u32 dfitrrdlvlresp1;
+	u32 dfitrrdlvlresp2;
+	u32 dfitrwrlvldelay0;
+	u32 dfitrwrlvldelay1;
+	u32 dfitrwrlvldelay2;
+	u32 dfitrrdlvldelay0;
+	u32 dfitrrdlvldelay1;
+	u32 dfitrrdlvldelay2;
+	u32 dfitrrdlvlgatedelay0;
+	u32 dfitrrdlvlgatedelay1;
+	u32 dfitrrdlvlgatedelay2;
+	u32 dfitrcmd;
+	u32 reserved14[(0x3f8 - 0x340) / 4];
+	u32 ipvr;
+	u32 iptr;
+};
+check_member(rk322x_ddr_pctl, iptr, 0x03fc);
+
+struct rk322x_ddr_phy {
+	u32 ddrphy_reg[0x100];
+};
+
+struct rk322x_pctl_timing {
+	u32 togcnt1u;
+	u32 tinit;
+	u32 trsth;
+	u32 togcnt100n;
+	u32 trefi;
+	u32 tmrd;
+	u32 trfc;
+	u32 trp;
+	u32 trtw;
+	u32 tal;
+	u32 tcl;
+	u32 tcwl;
+	u32 tras;
+	u32 trc;
+	u32 trcd;
+	u32 trrd;
+	u32 trtp;
+	u32 twr;
+	u32 twtr;
+	u32 texsr;
+	u32 txp;
+	u32 txpdll;
+	u32 tzqcs;
+	u32 tzqcsi;
+	u32 tdqs;
+	u32 tcksre;
+	u32 tcksrx;
+	u32 tcke;
+	u32 tmod;
+	u32 trstl;
+	u32 tzqcl;
+	u32 tmrr;
+	u32 tckesr;
+	u32 tdpd;
+	u32 trefi_mem_ddr3;
+};
+
+struct rk322x_phy_timing {
+	u32 mr[4];
+	u32 mr11;
+	u32 bl;
+	u32 cl_al;
+};
+
+struct rk322x_msch_timings {
+	u32 ddrtiming;
+	u32 ddrmode;
+	u32 readlatency;
+	u32 activate;
+	u32 devtodev;
+};
+
+struct rk322x_service_sys {
+	u32 id_coreid;
+	u32 id_revisionid;
+	u32 ddrconf;
+	u32 ddrtiming;
+	u32 ddrmode;
+	u32 readlatency;
+	u32 activate;
+	u32 devtodev;
+};
+
+struct rk322x_base_params {
+	struct rk322x_msch_timings noc_timing;
+	u32 ddrconfig;
+	u32 ddr_freq;
+	u32 dramtype;
+	/*
+	 * unused for rk322x
+	 */
+	u32 stride;
+	u32 odt;
+};
+
+/* PCT_DFISTCFG0 */
+#define DFI_INIT_START			BIT(0)
+#define DFI_DATA_BYTE_DISABLE_EN	BIT(2)
+
+/* PCT_DFISTCFG1 */
+#define DFI_DRAM_CLK_SR_EN		BIT(0)
+#define DFI_DRAM_CLK_DPD_EN		BIT(1)
+
+/* PCT_DFISTCFG2 */
+#define DFI_PARITY_INTR_EN		BIT(0)
+#define DFI_PARITY_EN			BIT(1)
+
+/* PCT_DFILPCFG0 */
+#define TLP_RESP_TIME_SHIFT		16
+#define LP_SR_EN			BIT(8)
+#define LP_PD_EN			BIT(0)
+
+/* PCT_DFITCTRLDELAY */
+#define TCTRL_DELAY_TIME_SHIFT		0
+
+/* PCT_DFITPHYWRDATA */
+#define TPHY_WRDATA_TIME_SHIFT		0
+
+/* PCT_DFITPHYRDLAT */
+#define TPHY_RDLAT_TIME_SHIFT		0
+
+/* PCT_DFITDRAMCLKDIS */
+#define TDRAM_CLK_DIS_TIME_SHIFT	0
+
+/* PCT_DFITDRAMCLKEN */
+#define TDRAM_CLK_EN_TIME_SHIFT		0
+
+/* PCTL_DFIODTCFG */
+#define RANK0_ODT_WRITE_SEL		BIT(3)
+#define RANK1_ODT_WRITE_SEL		BIT(11)
+
+/* PCTL_DFIODTCFG1 */
+#define ODT_LEN_BL8_W_SHIFT		16
+
+/* PUBL_ACDLLCR */
+#define ACDLLCR_DLLDIS			BIT(31)
+#define ACDLLCR_DLLSRST			BIT(30)
+
+/* PUBL_DXDLLCR */
+#define DXDLLCR_DLLDIS			BIT(31)
+#define DXDLLCR_DLLSRST			BIT(30)
+
+/* PUBL_DLLGCR */
+#define DLLGCR_SBIAS			BIT(30)
+
+/* PUBL_DXGCR */
+#define DQSRTT				BIT(9)
+#define DQRTT				BIT(10)
+
+/* PIR */
+#define PIR_INIT			BIT(0)
+#define PIR_DLLSRST			BIT(1)
+#define PIR_DLLLOCK			BIT(2)
+#define PIR_ZCAL			BIT(3)
+#define PIR_ITMSRST			BIT(4)
+#define PIR_DRAMRST			BIT(5)
+#define PIR_DRAMINIT			BIT(6)
+#define PIR_QSTRN			BIT(7)
+#define PIR_RVTRN			BIT(8)
+#define PIR_ICPC			BIT(16)
+#define PIR_DLLBYP			BIT(17)
+#define PIR_CTLDINIT			BIT(18)
+#define PIR_CLRSR			BIT(28)
+#define PIR_LOCKBYP			BIT(29)
+#define PIR_ZCALBYP			BIT(30)
+#define PIR_INITBYP			BIT(31)
+
+/* PGCR */
+#define PGCR_DFTLMT_SHIFT		3
+#define PGCR_DFTCMP_SHIFT		2
+#define PGCR_DQSCFG_SHIFT		1
+#define PGCR_ITMDMD_SHIFT		0
+
+/* PGSR */
+#define PGSR_IDONE			BIT(0)
+#define PGSR_DLDONE			BIT(1)
+#define PGSR_ZCDONE			BIT(2)
+#define PGSR_DIDONE			BIT(3)
+#define PGSR_DTDONE			BIT(4)
+#define PGSR_DTERR			BIT(5)
+#define PGSR_DTIERR			BIT(6)
+#define PGSR_DFTERR			BIT(7)
+#define PGSR_RVERR			BIT(8)
+#define PGSR_RVEIRR			BIT(9)
+
+/* PTR0 */
+#define PRT_ITMSRST_SHIFT		18
+#define PRT_DLLLOCK_SHIFT		6
+#define PRT_DLLSRST_SHIFT		0
+
+/* PTR1 */
+#define PRT_DINIT0_SHIFT		0
+#define PRT_DINIT1_SHIFT		19
+
+/* PTR2 */
+#define PRT_DINIT2_SHIFT		0
+#define PRT_DINIT3_SHIFT		17
+
+/* DCR */
+#define DDRMD_LPDDR			0
+#define DDRMD_DDR			1
+#define DDRMD_DDR2			2
+#define DDRMD_DDR3			3
+#define DDRMD_LPDDR2_LPDDR3		4
+#define DDRMD_MASK			7
+#define DDRMD_SHIFT			0
+#define PDQ_MASK			7
+#define PDQ_SHIFT			4
+
+/* DXCCR */
+#define DQSNRES_MASK			0xf
+#define DQSNRES_SHIFT			8
+#define DQSRES_MASK			0xf
+#define DQSRES_SHIFT			4
+
+/* DTPR */
+#define TDQSCKMAX_SHIFT			27
+#define TDQSCKMAX_MASK			7
+#define TDQSCK_SHIFT			24
+#define TDQSCK_MASK			7
+
+/* DSGCR */
+#define DQSGX_SHIFT			5
+#define DQSGX_MASK			7
+#define DQSGE_SHIFT			8
+#define DQSGE_MASK			7
+
+/* SCTL */
+#define INIT_STATE			0
+#define CFG_STATE			1
+#define GO_STATE			2
+#define SLEEP_STATE			3
+#define WAKEUP_STATE			4
+
+/* STAT */
+#define LP_TRIG_SHIFT			4
+#define LP_TRIG_MASK			7
+#define PCTL_STAT_MASK			7
+#define INIT_MEM			0
+#define CONFIG				1
+#define CONFIG_REQ			2
+#define ACCESS				3
+#define ACCESS_REQ			4
+#define LOW_POWER			5
+#define LOW_POWER_ENTRY_REQ		6
+#define LOW_POWER_EXIT_REQ		7
+
+/* ZQCR*/
+#define PD_OUTPUT_SHIFT			0
+#define PU_OUTPUT_SHIFT			5
+#define PD_ONDIE_SHIFT			10
+#define PU_ONDIE_SHIFT			15
+#define ZDEN_SHIFT			28
+
+/* DDLGCR */
+#define SBIAS_BYPASS			BIT(23)
+
+/* MCFG */
+#define MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT	24
+#define PD_IDLE_SHIFT			8
+#define MDDR_EN				(2 << 22)
+#define LPDDR2_EN			(3 << 22)
+#define LPDDR3_EN			(1 << 22)
+#define DDR2_EN				(0 << 5)
+#define DDR3_EN				(1 << 5)
+#define LPDDR2_S2			(0 << 6)
+#define LPDDR2_S4			(1 << 6)
+#define MDDR_LPDDR2_BL_2		(0 << 20)
+#define MDDR_LPDDR2_BL_4		(1 << 20)
+#define MDDR_LPDDR2_BL_8		(2 << 20)
+#define MDDR_LPDDR2_BL_16		(3 << 20)
+#define DDR2_DDR3_BL_4			0
+#define DDR2_DDR3_BL_8			1
+#define TFAW_SHIFT			18
+#define PD_EXIT_SLOW			(0 << 17)
+#define PD_EXIT_FAST			(1 << 17)
+#define PD_TYPE_SHIFT			16
+#define BURSTLENGTH_SHIFT		20
+
+/* POWCTL */
+#define POWER_UP_START			BIT(0)
+
+/* POWSTAT */
+#define POWER_UP_DONE			BIT(0)
+
+/* MCMD */
+enum {
+	DESELECT_CMD			= 0,
+	PREA_CMD,
+	REF_CMD,
+	MRS_CMD,
+	ZQCS_CMD,
+	ZQCL_CMD,
+	RSTL_CMD,
+	MRR_CMD				= 8,
+	DPDE_CMD,
+};
+
+#define BANK_ADDR_MASK			7
+#define BANK_ADDR_SHIFT			17
+#define CMD_ADDR_MASK			0x1fff
+#define CMD_ADDR_SHIFT			4
+
+#define LPDDR23_MA_SHIFT		4
+#define LPDDR23_MA_MASK			0xff
+#define LPDDR23_OP_SHIFT		12
+#define LPDDR23_OP_MASK			0xff
+
+#define START_CMD			(1u << 31)
+
+/* DDRPHY REG */
+enum {
+	/* DDRPHY_REG0 */
+	SOFT_RESET_MASK				= 3,
+	SOFT_DERESET_ANALOG			= 1 << 2,
+	SOFT_DERESET_DIGITAL			= 1 << 3,
+	SOFT_RESET_SHIFT			= 2,
+
+	/* DDRPHY REG1 */
+	PHY_DDR3				= 0,
+	PHY_DDR2				= 1,
+	PHY_LPDDR3				= 2,
+	PHY_LPDDR2				= 3,
+
+	PHT_BL_8				= 1 << 2,
+	PHY_BL_4				= 0 << 2,
+
+	/* DDRPHY_REG2 */
+	MEMORY_SELECT_DDR3			= 0 << 0,
+	MEMORY_SELECT_LPDDR3			= 2 << 0,
+	MEMORY_SELECT_LPDDR2			= 3 << 0,
+	DQS_SQU_CAL_SEL_CS0_CS1			= 0 << 4,
+	DQS_SQU_CAL_SEL_CS1			= 1 << 4,
+	DQS_SQU_CAL_SEL_CS0			= 2 << 4,
+	DQS_SQU_CAL_NORMAL_MODE			= 0 << 1,
+	DQS_SQU_CAL_BYPASS_MODE			= 1 << 1,
+	DQS_SQU_CAL_START			= 1 << 0,
+	DQS_SQU_NO_CAL				= 0 << 0,
+};
+
+/* CK pull up/down driver strength control */
+enum {
+	PHY_RON_RTT_DISABLE = 0,
+	PHY_RON_RTT_451OHM = 1,
+	PHY_RON_RTT_225OHM,
+	PHY_RON_RTT_150OHM,
+	PHY_RON_RTT_112OHM,
+	PHY_RON_RTT_90OHM,
+	PHY_RON_RTT_75OHM,
+	PHY_RON_RTT_64OHM = 7,
+
+	PHY_RON_RTT_56OHM = 16,
+	PHY_RON_RTT_50OHM,
+	PHY_RON_RTT_45OHM,
+	PHY_RON_RTT_41OHM,
+	PHY_RON_RTT_37OHM,
+	PHY_RON_RTT_34OHM,
+	PHY_RON_RTT_33OHM,
+	PHY_RON_RTT_30OHM = 23,
+
+	PHY_RON_RTT_28OHM = 24,
+	PHY_RON_RTT_26OHM,
+	PHY_RON_RTT_25OHM,
+	PHY_RON_RTT_23OHM,
+	PHY_RON_RTT_22OHM,
+	PHY_RON_RTT_21OHM,
+	PHY_RON_RTT_20OHM,
+	PHY_RON_RTT_19OHM = 31,
+};
+
+/* DQS squelch DLL delay */
+enum {
+	DQS_DLL_NO_DELAY	= 0,
+	DQS_DLL_22P5_DELAY,
+	DQS_DLL_45_DELAY,
+	DQS_DLL_67P5_DELAY,
+	DQS_DLL_90_DELAY,
+	DQS_DLL_112P5_DELAY,
+	DQS_DLL_135_DELAY,
+	DQS_DLL_157P5_DELAY,
+};
+
+/* GRF_SOC_CON0 */
+#define GRF_DDR_16BIT_EN		(((0x1 << 0) << 16) | (0x1 << 0))
+#define GRF_DDR_32BIT_EN		(((0x1 << 0) << 16) | (0x0 << 0))
+#define GRF_MSCH_NOC_16BIT_EN		(((0x1 << 7) << 16) | (0x1 << 7))
+#define GRF_MSCH_NOC_32BIT_EN		(((0x1 << 7) << 16) | (0x0 << 7))
+
+#define GRF_DDRPHY_BUFFEREN_CORE_EN	(((0x1 << 8) << 16) | (0x0 << 8))
+#define GRF_DDRPHY_BUFFEREN_CORE_DIS	(((0x1 << 8) << 16) | (0x1 << 8))
+
+#define GRF_DDR3_EN			(((0x1 << 6) << 16) | (0x1 << 6))
+#define GRF_LPDDR2_3_EN			(((0x1 << 6) << 16) | (0x0 << 6))
+
+#define PHY_DRV_ODT_SET(n)		(((n) << 4) | (n))
+#define DDR3_DLL_RESET			(1 << 8)
+
+#endif /* _ASM_ARCH_SDRAM_RK322X_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3288.h
new file mode 100644
index 000000000..9220763fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3288.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * Copyright 2014 Rockchip Inc.
+ */
+
+#ifndef _ASM_ARCH_RK3288_SDRAM_H__
+#define _ASM_ARCH_RK3288_SDRAM_H__
+
+struct rk3288_sdram_channel {
+	/*
+	 * bit width in address, eg:
+	 * 8 banks using 3 bit to address,
+	 * 2 cs using 1 bit to address.
+	 */
+	u8 rank;
+	u8 col;
+	u8 bk;
+	u8 bw;
+	u8 dbw;
+	u8 row_3_4;
+	u8 cs0_row;
+	u8 cs1_row;
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	/*
+	 * For of-platdata, which would otherwise convert this into two
+	 * byte-swapped integers. With a size of 9 bytes, this struct will
+	 * appear in of-platdata as a byte array.
+	 *
+	 * If OF_PLATDATA enabled, need to add a dummy byte in dts.(i.e 0xff)
+	 */
+	u8 dummy;
+#endif
+};
+
+struct rk3288_sdram_pctl_timing {
+	u32 togcnt1u;
+	u32 tinit;
+	u32 trsth;
+	u32 togcnt100n;
+	u32 trefi;
+	u32 tmrd;
+	u32 trfc;
+	u32 trp;
+	u32 trtw;
+	u32 tal;
+	u32 tcl;
+	u32 tcwl;
+	u32 tras;
+	u32 trc;
+	u32 trcd;
+	u32 trrd;
+	u32 trtp;
+	u32 twr;
+	u32 twtr;
+	u32 texsr;
+	u32 txp;
+	u32 txpdll;
+	u32 tzqcs;
+	u32 tzqcsi;
+	u32 tdqs;
+	u32 tcksre;
+	u32 tcksrx;
+	u32 tcke;
+	u32 tmod;
+	u32 trstl;
+	u32 tzqcl;
+	u32 tmrr;
+	u32 tckesr;
+	u32 tdpd;
+};
+check_member(rk3288_sdram_pctl_timing, tdpd, 0x144 - 0xc0);
+
+struct rk3288_sdram_phy_timing {
+	u32 dtpr0;
+	u32 dtpr1;
+	u32 dtpr2;
+	u32 mr[4];
+};
+
+struct rk3288_base_params {
+	u32 noc_timing;
+	u32 noc_activate;
+	u32 ddrconfig;
+	u32 ddr_freq;
+	u32 dramtype;
+	/*
+	 * DDR Stride is address mapping for DRAM space
+	 * Stride	Ch 0 range	Ch1 range	Total
+	 * 0x00		0-256MB		256MB-512MB	512MB
+	 * 0x05		0-1GB		0-1GB		1GB
+	 * 0x09		0-2GB		0-2GB		2GB
+	 * 0x0d		0-4GB		0-4GB		4GB
+	 * 0x17		N/A		0-4GB		4GB
+	 * 0x1a		0-4GB		4GB-8GB		8GB
+	 */
+	u32 stride;
+	u32 odt;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3328.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3328.h
new file mode 100644
index 000000000..10923505d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3328.h
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2016-2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_SDRAM_RK3328_H
+#define _ASM_ARCH_SDRAM_RK3328_H
+#include <asm/arch-rockchip/sdram_common.h>
+#include <asm/arch-rockchip/sdram_pctl_px30.h>
+#include <asm/arch-rockchip/sdram_phy_px30.h>
+#include <asm/arch-rockchip/sdram_phy_ron_rtt_px30.h>
+
+#define SR_IDLE		93
+#define PD_IDLE		13
+#define SDRAM_ADDR	0x00000000
+
+/* noc registers define */
+#define DDRCONF				0x8
+#define DDRTIMING			0xc
+#define DDRMODE				0x10
+#define READLATENCY			0x14
+#define AGING0				0x18
+#define AGING1				0x1c
+#define AGING2				0x20
+#define AGING3				0x24
+#define AGING4				0x28
+#define AGING5				0x2c
+#define ACTIVATE			0x38
+#define DEVTODEV			0x3c
+#define DDR4TIMING			0x40
+
+/* DDR GRF */
+#define DDR_GRF_CON(n)		(0 + (n) * 4)
+#define DDR_GRF_STATUS_BASE	(0X100)
+#define DDR_GRF_STATUS(n)	(DDR_GRF_STATUS_BASE + (n) * 4)
+
+/* CRU_SOFTRESET_CON5 */
+#define ddrphy_psrstn_req(n)    (((0x1 << 15) << 16) | ((n) << 15))
+#define ddrphy_srstn_req(n)     (((0x1 << 14) << 16) | ((n) << 14))
+#define ddrctrl_psrstn_req(n)	(((0x1 << 13) << 16) | ((n) << 13))
+#define ddrctrl_srstn_req(n)	(((0x1 << 12) << 16) | ((n) << 12))
+#define ddrmsch_srstn_req(n)	(((0x1 << 11) << 16) | ((n) << 11))
+#define msch_srstn_req(n)		(((0x1 << 9) << 16) | ((n) << 9))
+#define dfimon_srstn_req(n)		(((0x1 << 8) << 16) | ((n) << 8))
+#define grf_ddr_srstn_req(n)	(((0x1 << 7) << 16) | ((n) << 7))
+/* CRU_SOFTRESET_CON9 */
+#define ddrctrl_asrstn_req(n)		(((0x1 << 9) << 16) | ((n) << 9))
+
+/* CRU register */
+#define CRU_PLL_CON(pll_id, n)	((pll_id)  * 0x20 + (n) * 4)
+#define CRU_MODE				(0x80)
+#define CRU_GLB_CNT_TH			(0x90)
+#define CRU_CLKSEL_CON_BASE		0x100
+#define CRU_CLKSELS_CON(i)		(CRU_CLKSEL_CON_BASE + ((i) * 4))
+#define CRU_CLKGATE_CON_BASE		0x200
+#define CRU_CLKGATE_CON(i)		(CRU_CLKGATE_CON_BASE + ((i) * 4))
+#define CRU_CLKSFTRST_CON_BASE	0x300
+#define CRU_CLKSFTRST_CON(i)	(CRU_CLKSFTRST_CON_BASE + ((i) * 4))
+
+/* CRU_PLL_CON0 */
+#define PB(n)         ((0x1 << (15 + 16)) | ((n) << 15))
+#define POSTDIV1(n)   ((0x7 << (12 + 16)) | ((n) << 12))
+#define FBDIV(n)      ((0xFFF << 16) | (n))
+
+/* CRU_PLL_CON1 */
+#define RSTMODE(n)    ((0x1 << (15 + 16)) | ((n) << 15))
+#define RST(n)        ((0x1 << (14 + 16)) | ((n) << 14))
+#define PD(n)         ((0x1 << (13 + 16)) | ((n) << 13))
+#define DSMPD(n)      ((0x1 << (12 + 16)) | ((n) << 12))
+#define LOCK(n)       (((n) >> 10) & 0x1)
+#define POSTDIV2(n)   ((0x7 << (6 + 16)) | ((n) << 6))
+#define REFDIV(n)     ((0x3F << 16) | (n))
+
+u16 ddr_cfg_2_rbc[] = {
+	/*
+	 * [5:4]  row(13+n)
+	 * [3]    cs(0:0 cs, 1:2 cs)
+	 * [2]  bank(0:0bank,1:8bank)
+	 * [1:0]    col(11+n)
+	 */
+	/* row,        cs,       bank,   col */
+	((3 << 4) | (0 << 3) | (1 << 2) | 0),
+	((3 << 4) | (0 << 3) | (1 << 2) | 1),
+	((2 << 4) | (0 << 3) | (1 << 2) | 2),
+	((3 << 4) | (0 << 3) | (1 << 2) | 2),
+	((2 << 4) | (0 << 3) | (1 << 2) | 3),
+	((3 << 4) | (1 << 3) | (1 << 2) | 0),
+	((3 << 4) | (1 << 3) | (1 << 2) | 1),
+	((2 << 4) | (1 << 3) | (1 << 2) | 2),
+	((3 << 4) | (0 << 3) | (0 << 2) | 1),
+	((2 << 4) | (0 << 3) | (1 << 2) | 1),
+};
+
+u16 ddr4_cfg_2_rbc[] = {
+	/***************************
+	 * [6]	cs 0:0cs 1:2 cs
+	 * [5:3]  row(13+n)
+	 * [2]  cs(0:0 cs, 1:2 cs)
+	 * [1]  bw    0: 16bit 1:32bit
+	 * [0]  diebw 0:8bit 1:16bit
+	 ***************************/
+	/*  cs,       row,        cs,       bw,   diebw */
+	((0 << 6) | (3 << 3) | (0 << 2) | (1 << 1) | 0),
+	((1 << 6) | (2 << 3) | (0 << 2) | (1 << 1) | 0),
+	((0 << 6) | (4 << 3) | (0 << 2) | (0 << 1) | 0),
+	((1 << 6) | (3 << 3) | (0 << 2) | (0 << 1) | 0),
+	((0 << 6) | (4 << 3) | (0 << 2) | (1 << 1) | 1),
+	((1 << 6) | (3 << 3) | (0 << 2) | (1 << 1) | 1),
+	((1 << 6) | (4 << 3) | (0 << 2) | (0 << 1) | 1),
+	((0 << 6) | (2 << 3) | (1 << 2) | (1 << 1) | 0),
+	((0 << 6) | (3 << 3) | (1 << 2) | (0 << 1) | 0),
+	((0 << 6) | (3 << 3) | (1 << 2) | (1 << 1) | 1),
+	((0 << 6) | (4 << 3) | (1 << 2) | (0 << 1) | 1),
+};
+
+u32 addrmap[21][9] = {
+	/* map0  map1  map2  map3  map4  map5  map6  map7  map8 */
+	{22, 0x00070707, 0x00000000, 0x1f000000, 0x00001f1f, 0x06060606,
+		0x06060606, 0x00000f0f, 0x3f3f},
+	{23, 0x00080808, 0x00000000, 0x00000000, 0x00001f1f, 0x07070707,
+		0x07070707, 0x00000f0f, 0x3f3f},
+	{23, 0x00090909, 0x00000000, 0x00000000, 0x00001f00, 0x08080808,
+		0x0f080808, 0x00000f0f, 0x3f3f},
+	{24, 0x00090909, 0x00000000, 0x00000000, 0x00001f00, 0x08080808,
+		0x08080808, 0x00000f0f, 0x3f3f},
+	{24, 0x000a0a0a, 0x00000000, 0x00000000, 0x00000000, 0x09090909,
+		0x0f090909, 0x00000f0f, 0x3f3f},
+	{6, 0x00070707, 0x00000000, 0x1f000000, 0x00001f1f, 0x07070707,
+		0x07070707, 0x00000f0f, 0x3f3f},
+	{7, 0x00080808, 0x00000000, 0x00000000, 0x00001f1f, 0x08080808,
+		0x08080808, 0x00000f0f, 0x3f3f},
+	{8, 0x00090909, 0x00000000, 0x00000000, 0x00001f00, 0x09090909,
+		0x0f090909, 0x00000f0f, 0x3f3f},
+	{22, 0x001f0808, 0x00000000, 0x00000000, 0x00001f1f, 0x06060606,
+		0x06060606, 0x00000f0f, 0x3f3f},
+	{23, 0x00080808, 0x00000000, 0x00000000, 0x00001f1f, 0x07070707,
+		0x0f070707, 0x00000f0f, 0x3f3f},
+
+	{24, 0x003f0a0a, 0x01010100, 0x01010101, 0x00001f1f, 0x08080808,
+		0x08080808, 0x00000f0f, 0x0801},
+	{23, 0x003f0a0a, 0x01010100, 0x01010101, 0x00001f1f, 0x08080808,
+		0x0f080808, 0x00000f0f, 0x0801},
+	{24, 0x003f0909, 0x00000007, 0x1f000000, 0x00001f1f, 0x07070707,
+		0x07070707, 0x00000f07, 0x0700},
+	{23, 0x003f0909, 0x00000007, 0x1f000000, 0x00001f1f, 0x07070707,
+		0x07070707, 0x00000f0f, 0x0700},
+	{24, 0x003f0909, 0x01010100, 0x01010101, 0x00001f1f, 0x07070707,
+		0x07070707, 0x00000f07, 0x3f01},
+	{23, 0x003f0909, 0x01010100, 0x01010101, 0x00001f1f, 0x07070707,
+		0x07070707, 0x00000f0f, 0x3f01},
+	{24, 0x003f0808, 0x00000007, 0x1f000000, 0x00001f1f, 0x06060606,
+		0x06060606, 0x00000f06, 0x3f00},
+	{8, 0x003f0a0a, 0x01010100, 0x01010101, 0x00001f1f, 0x09090909,
+		0x0f090909, 0x00000f0f, 0x0801},
+	{7, 0x003f0909, 0x00000007, 0x1f000000, 0x00001f1f, 0x08080808,
+		0x08080808, 0x00000f0f, 0x0700},
+	{7, 0x003f0909, 0x01010100, 0x01010101, 0x00001f1f, 0x08080808,
+		0x08080808, 0x00000f0f, 0x3f01},
+
+	{6, 0x003f0808, 0x00000007, 0x1f000000, 0x00001f1f, 0x07070707,
+		0x07070707, 0x00000f07, 0x3f00}
+};
+
+struct rk3328_ddr_grf_regs {
+	u32 ddr_grf_con[4];
+	u32 reserved[(0x100 - 0x10) / 4];
+	u32 ddr_grf_status[11];
+};
+
+union noc_ddrtiming {
+	u32 d32;
+	struct {
+		unsigned acttoact:6;
+		unsigned rdtomiss:6;
+		unsigned wrtomiss:6;
+		unsigned burstlen:3;
+		unsigned rdtowr:5;
+		unsigned wrtord:5;
+		unsigned bwratio:1;
+	} b;
+};
+
+union noc_activate {
+	u32 d32;
+	struct {
+		unsigned rrd:4;
+		unsigned faw:6;
+		unsigned fawbank:1;
+		unsigned reserved1:21;
+	} b;
+};
+
+union noc_devtodev {
+	u32 d32;
+	struct {
+		unsigned busrdtord:2;
+		unsigned busrdtowr:2;
+		unsigned buswrtord:2;
+		unsigned reserved2:26;
+	} b;
+};
+
+union noc_ddr4timing {
+	u32 d32;
+	struct {
+		unsigned ccdl:3;
+		unsigned wrtordl:5;
+		unsigned rrdl:4;
+		unsigned reserved2:20;
+	} b;
+};
+
+union noc_ddrmode {
+	u32 d32;
+	struct {
+		unsigned autoprecharge:1;
+		unsigned bwratioextended:1;
+		unsigned reserved3:30;
+	} b;
+};
+
+struct msch_regs {
+	u32 coreid;
+	u32 revisionid;
+	u32 ddrconf;
+	u32 ddrtiming;
+	u32 ddrmode;
+	u32 readlatency;
+	u32 aging0;
+	u32 aging1;
+	u32 aging2;
+	u32 aging3;
+	u32 aging4;
+	u32 aging5;
+	u32 reserved[2];
+	u32 activate;
+	u32 devtodev;
+	u32 ddr4_timing;
+};
+
+struct sdram_msch_timings {
+	union noc_ddrtiming ddrtiming;
+	union noc_ddrmode ddrmode;
+	u32 readlatency;
+	union noc_activate activate;
+	union noc_devtodev devtodev;
+	union noc_ddr4timing ddr4timing;
+	u32 agingx0;
+};
+
+struct rk3328_sdram_channel {
+	struct sdram_cap_info cap_info;
+	struct sdram_msch_timings noc_timings;
+};
+
+struct rk3328_sdram_params {
+	struct rk3328_sdram_channel ch;
+	struct sdram_base_params base;
+	struct ddr_pctl_regs pctl_regs;
+	struct ddr_phy_regs phy_regs;
+	struct ddr_phy_skew skew;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3399.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3399.h
new file mode 100644
index 000000000..c76372ee8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sdram_rk3399.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016-2017 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_RK3399_H
+#define _ASM_ARCH_SDRAM_RK3399_H
+#include <asm/arch-rockchip/sdram_common.h>
+#include <asm/arch-rockchip/sdram_msch.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct rk3399_ddr_pctl_regs {
+	u32 denali_ctl[332];
+};
+
+struct rk3399_ddr_publ_regs {
+	u32 denali_phy[959];
+};
+
+struct rk3399_ddr_pi_regs {
+	u32 denali_pi[200];
+};
+
+struct rk3399_ddr_cic_regs {
+	u32 cic_ctrl0;
+	u32 cic_ctrl1;
+	u32 cic_idle_th;
+	u32 cic_cg_wait_th;
+	u32 cic_status0;
+	u32 cic_status1;
+	u32 cic_ctrl2;
+	u32 cic_ctrl3;
+	u32 cic_ctrl4;
+};
+
+/* DENALI_CTL_00 */
+#define START		1
+
+/* DENALI_CTL_68 */
+#define PWRUP_SREFRESH_EXIT	BIT(16)
+
+/* DENALI_CTL_274 */
+#define MEM_RST_VALID	1
+
+struct msch_regs {
+	u32 coreid;
+	u32 revisionid;
+	u32 ddrconf;
+	u32 ddrsize;
+	union noc_ddrtiminga0 ddrtiminga0;
+	union noc_ddrtimingb0 ddrtimingb0;
+	union noc_ddrtimingc0 ddrtimingc0;
+	union noc_devtodev0 devtodev0;
+	u32 reserved0[(0x110 - 0x20) / 4];
+	union noc_ddrmode ddrmode;
+	u32 reserved1[(0x1000 - 0x114) / 4];
+	u32 agingx0;
+};
+
+struct sdram_msch_timings {
+	union noc_ddrtiminga0 ddrtiminga0;
+	union noc_ddrtimingb0 ddrtimingb0;
+	union noc_ddrtimingc0 ddrtimingc0;
+	union noc_devtodev0 devtodev0;
+	union noc_ddrmode ddrmode;
+	u32 agingx0;
+};
+
+struct rk3399_sdram_channel {
+	struct sdram_cap_info cap_info;
+	struct sdram_msch_timings noc_timings;
+};
+
+struct rk3399_sdram_params {
+	struct rk3399_sdram_channel ch[2];
+	struct sdram_base_params base;
+	struct rk3399_ddr_pctl_regs pctl_regs;
+	struct rk3399_ddr_pi_regs pi_regs;
+	struct rk3399_ddr_publ_regs phy_regs;
+};
+
+#define PI_CA_TRAINING		BIT(0)
+#define PI_WRITE_LEVELING	BIT(1)
+#define PI_READ_GATE_TRAINING	BIT(2)
+#define PI_READ_LEVELING	BIT(3)
+#define PI_WDQ_LEVELING		BIT(4)
+#define PI_FULL_TRAINING	0xff
+
+enum {
+	STRIDE_128B = 0,
+	STRIDE_256B = 1,
+	STRIDE_512B = 2,
+	STRIDE_4KB = 3,
+	UN_STRIDE = 4,
+	PART_STRIDE = 5,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sys_proto.h
new file mode 100644
index 000000000..de5a8f11a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/sys_proto.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co.,Ltd
+ */
+
+#ifndef _ASM_ARCH_SYS_PROTO_H
+#define _ASM_ARCH_SYS_PROTO_H
+
+#endif /* _ASM_ARCH_SYS_PROTO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/timer.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/timer.h
new file mode 100644
index 000000000..77b542204
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/timer.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_TIMER_H
+#define __ASM_ARCH_TIMER_H
+
+struct rk_timer {
+	u32 timer_load_count0;
+	u32 timer_load_count1;
+	u32 timer_curr_value0;
+	u32 timer_curr_value1;
+	u32 timer_ctrl_reg;
+	u32 timer_int_status;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/uart.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/uart.h
new file mode 100644
index 000000000..feede5e55
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/uart.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_UART_H
+#define __ASM_ARCH_UART_H
+struct rk_uart {
+	unsigned int rbr; /* Receive buffer register. */
+	unsigned int ier; /* Interrupt enable register. */
+	unsigned int fcr; /* FIFO control register. */
+	unsigned int lcr; /* Line control register. */
+	unsigned int mcr; /* Modem control register. */
+	unsigned int lsr; /* Line status register. */
+	unsigned int msr; /* Modem status register. */
+	unsigned int scr;
+	unsigned int reserved1[(0x30 - 0x20) / 4];
+	unsigned int srbr[(0x70 - 0x30) / 4];
+	unsigned int far;
+	unsigned int tfr;
+	unsigned int rfw;
+	unsigned int usr;
+	unsigned int tfl;
+	unsigned int rfl;
+	unsigned int srr;
+	unsigned int srts;
+	unsigned int sbcr;
+	unsigned int sdmam;
+	unsigned int sfe;
+	unsigned int srt;
+	unsigned int stet;
+	unsigned int htx;
+	unsigned int dmasa;
+	unsigned int reserver2[(0xf4 - 0xac) / 4];
+	unsigned int cpr;
+	unsigned int ucv;
+	unsigned int ctr;
+};
+
+void rk_uart_init(void *base);
+void print_hex(unsigned int n);
+void print(char *s);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/roms/u-boot/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
new file mode 100644
index 000000000..49a714143
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
@@ -0,0 +1,359 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Copyright 2014 Rockchip Inc.
+ */
+
+#ifndef _ASM_ARCH_VOP_RK3288_H
+#define _ASM_ARCH_VOP_RK3288_H
+
+struct rk3288_vop {
+	u32 reg_cfg_done;
+	u32 version_info;
+	u32 sys_ctrl;
+	u32 sys_ctrl1;
+	u32 dsp_ctrl0;
+	u32 dsp_ctrl1;
+	u32 dsp_bg;
+	u32 mcu_ctrl;
+	u32 intr_ctrl0;
+	u32 intr_ctrl1;
+	u32 intr_reserved0;
+	u32 intr_reserved1;
+
+	u32 win0_ctrl0;
+	u32 win0_ctrl1;
+	u32 win0_color_key;
+	u32 win0_vir;
+	u32 win0_yrgb_mst;
+	u32 win0_cbr_mst;
+	u32 win0_act_info;
+	u32 win0_dsp_info;
+	u32 win0_dsp_st;
+	u32 win0_scl_factor_yrgb;
+	u32 win0_scl_factor_cbr;
+	u32 win0_scl_offset;
+	u32 win0_src_alpha_ctrl;
+	u32 win0_dst_alpha_ctrl;
+	u32 win0_fading_ctrl;
+	u32 win0_reserved0;
+
+	u32 win1_ctrl0;
+	u32 win1_ctrl1;
+	u32 win1_color_key;
+	u32 win1_vir;
+	u32 win1_yrgb_mst;
+	u32 win1_cbr_mst;
+	u32 win1_act_info;
+	u32 win1_dsp_info;
+	u32 win1_dsp_st;
+	u32 win1_scl_factor_yrgb;
+	u32 win1_scl_factor_cbr;
+	u32 win1_scl_offset;
+	u32 win1_src_alpha_ctrl;
+	u32 win1_dst_alpha_ctrl;
+	u32 win1_fading_ctrl;
+	u32 win1_reservd0;
+	u32 reserved2[48];
+	u32 post_dsp_hact_info;
+	u32 post_dsp_vact_info;
+	u32 post_scl_factor_yrgb;
+	u32 post_reserved;
+	u32 post_scl_ctrl;
+	u32 post_dsp_vact_info_f1;
+	u32 dsp_htotal_hs_end;
+	u32 dsp_hact_st_end;
+	u32 dsp_vtotal_vs_end;
+	u32 dsp_vact_st_end;
+	u32 dsp_vs_st_end_f1;
+	u32 dsp_vact_st_end_f1;
+};
+check_member(rk3288_vop, dsp_vact_st_end_f1, 0x19c);
+
+enum rockchip_fb_data_format_t {
+	ARGB8888 = 0,
+	RGB888 = 1,
+	RGB565 = 2,
+};
+
+enum {
+	LB_YUV_3840X5 = 0x0,
+	LB_YUV_2560X8 = 0x1,
+	LB_RGB_3840X2 = 0x2,
+	LB_RGB_2560X4 = 0x3,
+	LB_RGB_1920X5 = 0x4,
+	LB_RGB_1280X8 = 0x5
+};
+
+enum vop_modes {
+	VOP_MODE_EDP = 0,
+	VOP_MODE_MIPI,
+	VOP_MODE_HDMI,
+	VOP_MODE_LVDS,
+	VOP_MODE_DP,
+};
+
+/* VOP_VERSION_INFO */
+#define M_FPGA_VERSION (0xffff << 16)
+#define M_RTL_VERSION  (0xffff)
+
+/* VOP_SYS_CTRL */
+#define M_AUTO_GATING_EN (1 << 23)
+#define M_STANDBY_EN     (1 << 22)
+#define M_DMA_STOP       (1 << 21)
+#define M_MMU_EN         (1 << 20)
+#define M_DAM_BURST_LENGTH (0x3 << 18)
+#define M_MIPI_OUT_EN	   (1 << 15)
+#define M_EDP_OUT_EN       (1 << 14)
+#define M_HDMI_OUT_EN      (1 << 13)
+#define M_RGB_OUT_EN       (1 << 12)
+#define M_ALL_OUT_EN		\
+		(M_MIPI_OUT_EN | M_EDP_OUT_EN | M_HDMI_OUT_EN | M_RGB_OUT_EN)
+#define M_EDPI_WMS_FS      (1 << 10)
+#define M_EDPI_WMS_MODE    (1 << 9)
+#define M_EDPI_HALT_EN     (1 << 8)
+#define M_DOUB_CH_OVERLAP_NUM (0xf << 4)
+#define M_DOUB_CHANNEL_EN     (1 << 3)
+#define M_DIRECT_PATH_LAYER_SEL (0x3 << 1)
+#define M_DIRECT_PATH_EN       (1)
+
+#define V_AUTO_GATING_EN(x) (((x) & 1) << 23)
+#define V_STANDBY_EN(x)     (((x) & 1) << 22)
+#define V_DMA_STOP(x)       (((x) & 1) << 21)
+#define V_MMU_EN(x)         (((x) & 1) << 20)
+#define V_DMA_BURST_LENGTH(x) (((x) & 3) << 18)
+#define V_MIPI_OUT_EN(x)      (((x) & 1) << 15)
+#define V_EDP_OUT_EN(x)       (((x) & 1) << 14)
+#define V_HDMI_OUT_EN(x)      (((x) & 1) << 13)
+#define V_RGB_OUT_EN(x)       (((x) & 1) << 12)
+#define V_EDPI_WMS_FS(x)      (((x) & 1) << 10)
+#define V_EDPI_WMS_MODE(x)    (((x) & 1) << 9)
+#define V_EDPI_HALT_EN(x)     (((x)&1)<<8)
+#define V_DOUB_CH_OVERLAP_NUM(x) (((x) & 0xf) << 4)
+#define V_DOUB_CHANNEL_EN(x)     (((x) & 1) << 3)
+#define V_DIRECT_PATH_LAYER_SEL(x) (((x) & 3) << 1)
+#define V_DIRECT_PATH_EN(x)       ((x) & 1)
+
+/* VOP_SYS_CTRL1 */
+#define M_AXI_OUTSTANDING_MAX_NUM (0x1f << 13)
+#define M_AXI_MAX_OUTSTANDING_EN  (1 << 12)
+#define M_NOC_WIN_QOS             (3 << 10)
+#define M_NOC_QOS_EN              (1 << 9)
+#define M_NOC_HURRY_THRESHOLD     (0x3f << 3)
+#define M_NOC_HURRY_VALUE         (0x3 << 1)
+#define M_NOC_HURRY_EN            (1)
+
+#define V_AXI_OUTSTANDING_MAX_NUM(x) (((x) & 0x1f) << 13)
+#define V_AXI_MAX_OUTSTANDING_EN(x)  (((x) & 1) << 12)
+#define V_NOC_WIN_QOS(x)             (((x) & 3) << 10)
+#define V_NOC_QOS_EN(x)              (((x) & 1) << 9)
+#define V_NOC_HURRY_THRESHOLD(x)     (((x) & 0x3f) << 3)
+#define V_NOC_HURRY_VALUE(x)         (((x) & 3) << 1)
+#define V_NOC_HURRY_EN(x)            ((x) & 1)
+
+/* VOP_DSP_CTRL0 */
+#define M_DSP_Y_MIR_EN              (1 << 23)
+#define M_DSP_X_MIR_EN              (1 << 22)
+#define M_DSP_YUV_CLIP              (1 << 21)
+#define M_DSP_CCIR656_AVG           (1 << 20)
+#define M_DSP_BLACK_EN              (1 << 19)
+#define M_DSP_BLANK_EN              (1 << 18)
+#define M_DSP_OUT_ZERO              (1 << 17)
+#define M_DSP_DUMMY_SWAP            (1 << 16)
+#define M_DSP_DELTA_SWAP            (1 << 15)
+#define M_DSP_RG_SWAP               (1 << 14)
+#define M_DSP_RB_SWAP               (1 << 13)
+#define M_DSP_BG_SWAP               (1 << 12)
+#define M_DSP_FIELD_POL             (1 << 11)
+#define M_DSP_INTERLACE             (1 << 10)
+#define M_DSP_DDR_PHASE             (1 << 9)
+#define M_DSP_DCLK_DDR              (1 << 8)
+#define M_DSP_DCLK_POL              (1 << 7)
+#define M_DSP_DEN_POL               (1 << 6)
+#define M_DSP_VSYNC_POL             (1 << 5)
+#define M_DSP_HSYNC_POL             (1 << 4)
+#define M_DSP_OUT_MODE              (0xf)
+
+#define V_DSP_Y_MIR_EN(x)              (((x) & 1) << 23)
+#define V_DSP_X_MIR_EN(x)              (((x) & 1) << 22)
+#define V_DSP_YUV_CLIP(x)              (((x) & 1) << 21)
+#define V_DSP_CCIR656_AVG(x)           (((x) & 1) << 20)
+#define V_DSP_BLACK_EN(x)              (((x) & 1) << 19)
+#define V_DSP_BLANK_EN(x)              (((x) & 1) << 18)
+#define V_DSP_OUT_ZERO(x)              (((x) & 1) << 17)
+#define V_DSP_DUMMY_SWAP(x)            (((x) & 1) << 16)
+#define V_DSP_DELTA_SWAP(x)            (((x) & 1) << 15)
+#define V_DSP_RG_SWAP(x)               (((x) & 1) << 14)
+#define V_DSP_RB_SWAP(x)               (((x) & 1) << 13)
+#define V_DSP_BG_SWAP(x)               (((x) & 1) << 12)
+#define V_DSP_FIELD_POL(x)             (((x) & 1) << 11)
+#define V_DSP_INTERLACE(x)             (((x) & 1) << 10)
+#define V_DSP_DDR_PHASE(x)             (((x) & 1) << 9)
+#define V_DSP_DCLK_DDR(x)              (((x) & 1) << 8)
+#define V_DSP_DCLK_POL(x)              (((x) & 1) << 7)
+#define V_DSP_DEN_POL(x)               (((x) & 1) << 6)
+#define V_DSP_VSYNC_POL(x)             (((x) & 1) << 5)
+#define V_DSP_HSYNC_POL(x)             (((x) & 1) << 4)
+#define V_DSP_PIN_POL(x)               (((x) & 0xf) << 4)
+#define V_DSP_OUT_MODE(x)              ((x) & 0xf)
+
+/* VOP_DSP_CTRL1 */
+#define V_RK3399_DSP_MIPI_POL(x)       ((x) << 28)
+#define V_RK3399_DSP_EDP_POL(x)        ((x) << 24)
+#define V_RK3399_DSP_HDMI_POL(x)       ((x) << 20)
+#define V_RK3399_DSP_LVDS_POL(x)       ((x) << 16)
+
+#define M_RK3399_DSP_MIPI_POL          (V_RK3399_DSP_MIPI_POL(0xf))
+#define M_RK3399_DSP_EDP_POL           (V_RK3399_DSP_EDP_POL(0xf))
+#define M_RK3399_DSP_HDMI_POL          (V_RK3399_DSP_HDMI_POL(0xf))
+#define M_RK3399_DSP_LVDS_POL          (V_RK3399_DSP_LVDS_POL(0xf))
+
+#define M_DSP_LAYER3_SEL               (3 << 14)
+#define M_DSP_LAYER2_SEL               (3 << 12)
+#define M_DSP_LAYER1_SEL               (3 << 10)
+#define M_DSP_LAYER0_SEL               (3 << 8)
+#define M_DITHER_UP_EN                 (1 << 6)
+#define M_DITHER_DOWN_SEL              (1 << 4)
+#define M_DITHER_DOWN_MODE             (1 << 3)
+#define M_DITHER_DOWN_EN               (1 << 2)
+#define M_PRE_DITHER_DOWN_EN           (1 << 1)
+#define M_DSP_LUT_EN                   (1)
+
+#define V_DSP_LAYER3_SEL(x)                (((x) & 3) << 14)
+#define V_DSP_LAYER2_SEL(x)                (((x) & 3) << 12)
+#define V_DSP_LAYER1_SEL(x)                (((x) & 3) << 10)
+#define V_DSP_LAYER0_SEL(x)                (((x) & 3) << 8)
+#define V_DITHER_UP_EN(x)                  (((x) & 1) << 6)
+#define V_DITHER_DOWN_SEL(x)               (((x) & 1) << 4)
+#define V_DITHER_DOWN_MODE(x)              (((x) & 1) << 3)
+#define V_DITHER_DOWN_EN(x)                (((x) & 1) << 2)
+#define V_PRE_DITHER_DOWN_EN(x)            (((x) & 1) << 1)
+#define V_DSP_LUT_EN(x)                    ((x)&1)
+
+/* VOP_DSP_BG */
+#define M_DSP_BG_RED     (0x3f << 20)
+#define M_DSP_BG_GREEN   (0x3f << 10)
+#define M_DSP_BG_BLUE    (0x3f << 0)
+
+#define V_DSP_BG_RED(x)     (((x) & 0x3f) << 20)
+#define V_DSP_BG_GREEN(x)   (((x) & 0x3f) << 10)
+#define V_DSP_BG_BLUE(x)    (((x) & 0x3f) << 0)
+
+/* VOP_WIN0_CTRL0 */
+#define M_WIN0_YUV_CLIP     (1 << 20)
+#define M_WIN0_CBR_DEFLICK  (1 << 19)
+#define M_WIN0_YRGB_DEFLICK  (1 << 18)
+#define M_WIN0_PPAS_ZERO_EN  (1 << 16)
+#define M_WIN0_UV_SWAP       (1 << 15)
+#define M_WIN0_MID_SWAP      (1 << 14)
+#define M_WIN0_ALPHA_SWAP    (1 << 13)
+#define M_WIN0_RB_SWAP       (1 << 12)
+#define M_WIN0_CSC_MODE      (3 << 10)
+#define M_WIN0_NO_OUTSTANDING (1 << 9)
+#define M_WIN0_INTERLACE_READ  (1 << 8)
+#define M_WIN0_LB_MODE         (7 << 5)
+#define M_WIN0_FMT_10          (1 << 4)
+#define M_WIN0_DATA_FMT        (7 << 1)
+#define M_WIN0_EN              (1 << 0)
+
+#define V_WIN0_YUV_CLIP(x)       (((x) & 1) << 20)
+#define V_WIN0_CBR_DEFLICK(x)    (((x) & 1) << 19)
+#define V_WIN0_YRGB_DEFLICK(x)   (((x) & 1) << 18)
+#define V_WIN0_PPAS_ZERO_EN(x)   (((x) & 1) << 16)
+#define V_WIN0_UV_SWAP(x)        (((x) & 1) << 15)
+#define V_WIN0_MID_SWAP(x)       (((x) & 1) << 14)
+#define V_WIN0_ALPHA_SWAP(x)     (((x) & 1) << 13)
+#define V_WIN0_RB_SWAP(x)        (((x) & 1) << 12)
+#define V_WIN0_CSC_MODE(x)       (((x) & 3) << 10)
+#define V_WIN0_NO_OUTSTANDING(x) (((x) & 1) << 9)
+#define V_WIN0_INTERLACE_READ(x)  (((x) & 1) << 8)
+#define V_WIN0_LB_MODE(x)         (((x) & 7) << 5)
+#define V_WIN0_FMT_10(x)          (((x) & 1) << 4)
+#define V_WIN0_DATA_FMT(x)        (((x) & 7) << 1)
+#define V_WIN0_EN(x)              ((x) & 1)
+
+/* VOP_WIN0_CTRL1 */
+#define M_WIN0_CBR_VSD_MODE        (1 << 31)
+#define M_WIN0_CBR_VSU_MODE        (1 << 30)
+#define M_WIN0_CBR_HSD_MODE        (3 << 28)
+#define M_WIN0_CBR_VER_SCL_MODE    (3 << 26)
+#define M_WIN0_CBR_HOR_SCL_MODE    (3 << 24)
+#define M_WIN0_YRGB_VSD_MODE       (1 << 23)
+#define M_WIN0_YRGB_VSU_MODE       (1 << 22)
+#define M_WIN0_YRGB_HSD_MODE       (3 << 20)
+#define M_WIN0_YRGB_VER_SCL_MODE   (3 << 18)
+#define M_WIN0_YRGB_HOR_SCL_MODE   (3 << 16)
+#define M_WIN0_LINE_LOAD_MODE      (1 << 15)
+#define M_WIN0_CBR_AXI_GATHER_NUM  (7 << 12)
+#define M_WIN0_YRGB_AXI_GATHER_NUM (0xf << 8)
+#define M_WIN0_VSD_CBR_GT2         (1 << 7)
+#define M_WIN0_VSD_CBR_GT4         (1 << 6)
+#define M_WIN0_VSD_YRGB_GT2        (1 << 5)
+#define M_WIN0_VSD_YRGB_GT4        (1 << 4)
+#define M_WIN0_BIC_COE_SEL         (3 << 2)
+#define M_WIN0_CBR_AXI_GATHER_EN   (1 << 1)
+#define M_WIN0_YRGB_AXI_GATHER_EN  (1)
+
+#define V_WIN0_CBR_VSD_MODE(x)        (((x) & 1) << 31)
+#define V_WIN0_CBR_VSU_MODE(x)        (((x) & 1) << 30)
+#define V_WIN0_CBR_HSD_MODE(x)        (((x) & 3) << 28)
+#define V_WIN0_CBR_VER_SCL_MODE(x)    (((x) & 3) << 26)
+#define V_WIN0_CBR_HOR_SCL_MODE(x)    (((x) & 3) << 24)
+#define V_WIN0_YRGB_VSD_MODE(x)       (((x) & 1) << 23)
+#define V_WIN0_YRGB_VSU_MODE(x)       (((x) & 1) << 22)
+#define V_WIN0_YRGB_HSD_MODE(x)       (((x) & 3) << 20)
+#define V_WIN0_YRGB_VER_SCL_MODE(x)   (((x) & 3) << 18)
+#define V_WIN0_YRGB_HOR_SCL_MODE(x)   (((x) & 3) << 16)
+#define V_WIN0_LINE_LOAD_MODE(x)      (((x) & 1) << 15)
+#define V_WIN0_CBR_AXI_GATHER_NUM(x)  (((x) & 7) << 12)
+#define V_WIN0_YRGB_AXI_GATHER_NUM(x) (((x) & 0xf) << 8)
+#define V_WIN0_VSD_CBR_GT2(x)         (((x) & 1) << 7)
+#define V_WIN0_VSD_CBR_GT4(x)         (((x) & 1) << 6)
+#define V_WIN0_VSD_YRGB_GT2(x)        (((x) & 1) << 5)
+#define V_WIN0_VSD_YRGB_GT4(x)        (((x) & 1) << 4)
+#define V_WIN0_BIC_COE_SEL(x)         (((x) & 3) << 2)
+#define V_WIN0_CBR_AXI_GATHER_EN(x)   (((x) & 1) << 1)
+#define V_WIN0_YRGB_AXI_GATHER_EN(x)  ((x) & 1)
+
+/*VOP_WIN0_COLOR_KEY*/
+#define M_WIN0_KEY_EN                 (1 << 31)
+#define M_WIN0_KEY_COLOR              (0x3fffffff)
+
+#define V_WIN0_KEY_EN(x)              (((x) & 1) << 31)
+#define V_WIN0_KEY_COLOR(x)           ((x) & 0x3fffffff)
+
+/* VOP_WIN0_VIR */
+#define V_ARGB888_VIRWIDTH(x)	(((x) & 0x3fff) << 0)
+#define V_RGB888_VIRWIDTH(x)	(((((x * 3) >> 2)+((x) % 3)) & 0x3fff) << 0)
+#define V_RGB565_VIRWIDTH(x)	(((x / 2) & 0x3fff) << 0)
+#define YUV_VIRWIDTH(x)		(((x / 4) & 0x3fff) << 0)
+
+/* VOP_WIN0_ACT_INFO */
+#define V_ACT_HEIGHT(x)         (((x) & 0x1fff) << 16)
+#define V_ACT_WIDTH(x)          ((x) & 0x1fff)
+
+/* VOP_WIN0_DSP_INFO */
+#define V_DSP_HEIGHT(x)         (((x) & 0xfff) << 16)
+#define V_DSP_WIDTH(x)          ((x) & 0xfff)
+
+/* VOP_WIN0_DSP_ST */
+#define V_DSP_YST(x)            (((x) & 0x1fff) << 16)
+#define V_DSP_XST(x)            ((x) & 0x1fff)
+
+/* VOP_WIN0_SCL_OFFSET */
+#define V_WIN0_VS_OFFSET_CBR(x)     (((x) & 0xff) << 24)
+#define V_WIN0_VS_OFFSET_YRGB(x)    (((x) & 0xff) << 16)
+#define V_WIN0_HS_OFFSET_CBR(x)     (((x) & 0xff) << 8)
+#define V_WIN0_HS_OFFSET_YRGB(x)    ((x) & 0xff)
+
+#define V_HSYNC(x)		(((x)&0x1fff)<<0)   /* hsync pulse width */
+#define V_HORPRD(x)		(((x)&0x1fff)<<16)   /* horizontal period */
+#define V_VSYNC(x)		(((x)&0x1fff)<<0)
+#define V_VERPRD(x)		(((x)&0x1fff)<<16)
+
+#define V_HEAP(x)		(((x)&0x1fff)<<0)/* horizontal active end */
+#define V_HASP(x)		(((x)&0x1fff)<<16)/* horizontal active start */
+#define V_VAEP(x)		(((x)&0x1fff)<<0)
+#define V_VASP(x)		(((x)&0x1fff)<<16)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rv1108/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-rv1108/boot0.h
new file mode 100644
index 000000000..2e78b074a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rv1108/boot0.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_BOOT0_H__
+#define __ASM_ARCH_BOOT0_H__
+
+#include <asm/arch-rockchip/boot0.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-rv1108/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-rv1108/gpio.h
new file mode 100644
index 000000000..eca79d515
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-rv1108/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef __ASM_ARCH_GPIO_H__
+#define __ASM_ARCH_GPIO_H__
+
+#include <asm/arch-rockchip/gpio.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sa1100/bitfield.h b/roms/u-boot/arch/arm/include/asm/arch-sa1100/bitfield.h
new file mode 100644
index 000000000..104a21c2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sa1100/bitfield.h
@@ -0,0 +1,112 @@
+/*
+ *	FILE		bitfield.h
+ *
+ *	Version		1.1
+ *	Author		Copyright (c) Marc A. Viredaz, 1998
+ *			DEC Western Research Laboratory, Palo Alto, CA
+ *	Date		April 1998 (April 1997)
+ *	System		Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose		Definition of macros to operate on bit fields.
+ */
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size		Size of the bit field, in number of bits.
+ *    Shft		Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld		Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field		Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize		Size of the bit field, in number of bits.
+ *    FShft		Shift value of the bit field with respect to bit 0.
+ *    FMsk		Mask for the bit field.
+ *    FAlnMsk		Mask for the bit field, aligned on bit 0.
+ *    F1stBit		First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value		Bit-field value.
+ *    Field		Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt		Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+			(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data		Data containing the bit-field to be extracted.
+ *    Field		Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr		Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+			((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/clk.h b/roms/u-boot/arch/arm/include/asm/arch-spear/clk.h
new file mode 100644
index 000000000..b193f764b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/clk.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010, STMicroelectronics - All Rights Reserved
+ * Author(s): Vipin Kumar, <vipin.kumar@st.com> for STMicroelectronics.
+ */
+
+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
+{
+	return 83000000;
+}
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-spear/gpio.h
new file mode 100644
index 000000000..4c8c40b1c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/gpio.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ */
+
+
+#ifndef __ASM_ARCH_SPEAR_GPIO_H
+#define __ASM_ARCH_SPEAR_GPIO_H
+
+enum gpio_direction {
+	GPIO_DIRECTION_IN,
+	GPIO_DIRECTION_OUT,
+};
+
+struct gpio_regs {
+	u32 gpiodata[0x100];	/* 0x000 ... 0x3fc */
+	u32 gpiodir;		/* 0x400 */
+};
+
+#define SPEAR_GPIO_COUNT		8
+#define DATA_REG_ADDR(gpio)		(1 << (gpio + 2))
+
+#endif	/* __ASM_ARCH_SPEAR_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/hardware.h b/roms/u-boot/arch/arm/include/asm/arch-spear/hardware.h
new file mode 100644
index 000000000..c05bd44c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/hardware.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009, STMicroelectronics - All Rights Reserved
+ * Author(s): Vipin Kumar, <vipin.kumar@st.com> for STMicroelectronics.
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#define CONFIG_SYS_USBD_BASE			0xE1100000
+#define CONFIG_SYS_PLUG_BASE			0xE1200000
+#define CONFIG_SYS_FIFO_BASE			0xE1000800
+#define CONFIG_SYS_UHC0_EHCI_BASE		0xE1800000
+#define CONFIG_SYS_UHC1_EHCI_BASE		0xE2000000
+#define CONFIG_SYS_SMI_BASE			0xFC000000
+#define CONFIG_SPEAR_SYSCNTLBASE		0xFCA00000
+#define CONFIG_SPEAR_TIMERBASE			0xFC800000
+#define CONFIG_SPEAR_MISCBASE			0xFCA80000
+#define CONFIG_SPEAR_ETHBASE			0xE0800000
+#define CONFIG_SPEAR_MPMCBASE			0xFC600000
+#define CONFIG_SSP1_BASE			0xD0100000
+#define CONFIG_SSP2_BASE			0xD0180000
+#define CONFIG_SSP3_BASE			0xD8180000
+#define CONFIG_GPIO_BASE			0xD8100000
+
+#define CONFIG_SYS_NAND_CLE			(1 << 16)
+#define CONFIG_SYS_NAND_ALE			(1 << 17)
+
+#if defined(CONFIG_SPEAR600)
+#define CONFIG_SYS_FSMC_BASE			0xD1800000
+#define CONFIG_FSMC_NAND_BASE			0xD2000000
+
+#define CONFIG_SPEAR_BOOTSTRAPCFG		0xFCA80000
+#define CONFIG_SPEAR_BOOTSTRAPSHFT		16
+#define CONFIG_SPEAR_BOOTSTRAPMASK		0xB
+#define CONFIG_SPEAR_ONLYSNORBOOT		0xA
+#define CONFIG_SPEAR_NORNANDBOOT		0xB
+#define CONFIG_SPEAR_NORNAND8BOOT		0x8
+#define CONFIG_SPEAR_NORNAND16BOOT		0x9
+#define CONFIG_SPEAR_USBBOOT			0x8
+
+#define CONFIG_SPEAR_MPMCREGS			100
+
+#elif defined(CONFIG_SPEAR300)
+#define CONFIG_SYS_FSMC_BASE			0x94000000
+
+#elif defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_FSMC_BASE			0x44000000
+
+#undef CONFIG_SYS_NAND_CLE
+#undef CONFIG_SYS_NAND_ALE
+#define CONFIG_SYS_NAND_CLE			(1 << 17)
+#define CONFIG_SYS_NAND_ALE			(1 << 16)
+
+#define CONFIG_SPEAR_EMIBASE			0x4F000000
+#define CONFIG_SPEAR_RASBASE			0xB4000000
+
+#define CONFIG_SYS_MACB0_BASE			0xB0000000
+#define CONFIG_SYS_MACB1_BASE			0xB0800000
+#define CONFIG_SYS_MACB2_BASE			0xB1000000
+#define CONFIG_SYS_MACB3_BASE			0xB1800000
+
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_FSMC_BASE			0x4C000000
+
+#define CONFIG_SPEAR_EMIBASE			0x40000000
+#define CONFIG_SPEAR_RASBASE			0xB3000000
+
+#define CONFIG_SYS_MACB0_BASE			0xAA000000
+
+#endif
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/spr_defs.h b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_defs.h
new file mode 100644
index 000000000..d09e7eb63
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_defs.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ */
+
+#ifndef __SPR_DEFS_H__
+#define __SPR_DEFS_H__
+
+extern int spear_board_init(ulong);
+extern void setfreq(unsigned int, unsigned int);
+extern unsigned int setfreq_sz;
+
+void plat_ddr_init(void);
+void spear_late_init(void);
+
+int snor_boot_selected(void);
+int nand_boot_selected(void);
+int pnor_boot_selected(void);
+int usb_boot_selected(void);
+int uart_boot_selected(void);
+int tftp_boot_selected(void);
+int i2c_boot_selected(void);
+int spi_boot_selected(void);
+int mmc_boot_selected(void);
+
+extern u32 mpmc_conf_vals[];
+
+struct chip_data {
+	int cpufreq;
+	int dramfreq;
+	int dramtype;
+	uchar version[32];
+};
+
+/* HW mac id in i2c memory definitions */
+#define MAGIC_OFF	0x0
+#define MAGIC_LEN	0x2
+#define MAGIC_BYTE0	0x55
+#define MAGIC_BYTE1	0xAA
+#define MAC_OFF		0x2
+#define MAC_LEN		0x6
+
+#define PNOR_WIDTH_8			0
+#define	PNOR_WIDTH_16			1
+#define	PNOR_WIDTH_32			2
+#define PNOR_WIDTH_NUM			3
+#define PNOR_WIDTH_SEARCH		0xff
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/spr_emi.h b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_emi.h
new file mode 100644
index 000000000..7b1cf35d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_emi.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Ryan CHEN, ST Micoelectronics, ryan.chen@st.com
+ */
+
+#ifndef __SPEAR_EMI_H__
+#define __SPEAR_EMI_H__
+
+#ifdef CONFIG_SPEAR_EMI
+
+struct emi_bank_regs {
+	u32 tap;
+	u32 tsdp;
+	u32 tdpw;
+	u32 tdpr;
+	u32 tdcs;
+	u32 control;
+};
+
+struct emi_regs {
+	struct emi_bank_regs bank_regs[CONFIG_SYS_MAX_FLASH_BANKS];
+	u32 tout;
+	u32 ack;
+	u32 irq;
+};
+
+#define EMI_ACKMSK		0x40
+
+/* control register definitions */
+#define EMI_CNTL_ENBBYTEW	(1 << 2)
+#define EMI_CNTL_ENBBYTER	(1 << 3)
+#define EMI_CNTL_ENBBYTERW	(EMI_CNTL_ENBBYTER | EMI_CNTL_ENBBYTEW)
+
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/spr_gpt.h b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_gpt.h
new file mode 100644
index 000000000..dced0a17a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_gpt.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ */
+
+#ifndef _SPR_GPT_H
+#define _SPR_GPT_H
+
+struct gpt_regs {
+	u8 reserved[0x80];
+	u32 control;
+	u32 status;
+	u32 compare;
+	u32 count;
+	u32 capture_re;
+	u32 capture_fe;
+};
+
+/*
+ * TIMER_CONTROL register settings
+ */
+
+#define GPT_PRESCALER_MASK		0x000F
+#define GPT_PRESCALER_1			0x0000
+#define GPT_PRESCALER_2 		0x0001
+#define GPT_PRESCALER_4 		0x0002
+#define GPT_PRESCALER_8 		0x0003
+#define GPT_PRESCALER_16		0x0004
+#define GPT_PRESCALER_32		0x0005
+#define GPT_PRESCALER_64		0x0006
+#define GPT_PRESCALER_128		0x0007
+#define GPT_PRESCALER_256		0x0008
+
+#define GPT_MODE_SINGLE_SHOT		0x0010
+#define GPT_MODE_AUTO_RELOAD		0x0000
+
+#define GPT_ENABLE			0x0020
+
+#define GPT_CAPT_MODE_MASK		0x00C0
+#define GPT_CAPT_MODE_NONE		0x0000
+#define GPT_CAPT_MODE_RE		0x0040
+#define GPT_CAPT_MODE_FE		0x0080
+#define GPT_CAPT_MODE_BOTH		0x00C0
+
+#define GPT_INT_MATCH			0x0100
+#define GPT_INT_FE			0x0200
+#define GPT_INT_RE			0x0400
+
+/*
+ * TIMER_STATUS register settings
+ */
+
+#define GPT_STS_MATCH			0x0001
+#define GPT_STS_FE			0x0002
+#define GPT_STS_RE			0x0004
+
+/*
+ * TIMER_COMPARE register settings
+ */
+
+#define GPT_FREE_RUNNING		0xFFFF
+
+/* Timer, HZ specific defines */
+#define CONFIG_SPEAR_HZ			1000
+#define CONFIG_SPEAR_HZ_CLOCK		8300000
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/spr_misc.h b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_misc.h
new file mode 100644
index 000000000..017111935
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_misc.h
@@ -0,0 +1,260 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ */
+
+#ifndef _SPR_MISC_H
+#define _SPR_MISC_H
+
+struct misc_regs {
+	u32 auto_cfg_reg;	/* 0x0 */
+	u32 armdbg_ctr_reg;	/* 0x4 */
+	u32 pll1_cntl;		/* 0x8 */
+	u32 pll1_frq;		/* 0xc */
+	u32 pll1_mod;		/* 0x10 */
+	u32 pll2_cntl;		/* 0x14 */
+	u32 pll2_frq;		/* 0x18 */
+	u32 pll2_mod;		/* 0x1C */
+	u32 pll_ctr_reg;	/* 0x20 */
+	u32 amba_clk_cfg;	/* 0x24 */
+	u32 periph_clk_cfg;	/* 0x28 */
+	u32 periph1_clken;	/* 0x2C */
+	u32 soc_core_id;	/* 0x30 */
+	u32 ras_clken;		/* 0x34 */
+	u32 periph1_rst;	/* 0x38 */
+	u32 periph2_rst;	/* 0x3C */
+	u32 ras_rst;		/* 0x40 */
+	u32 prsc1_clk_cfg;	/* 0x44 */
+	u32 prsc2_clk_cfg;	/* 0x48 */
+	u32 prsc3_clk_cfg;	/* 0x4C */
+	u32 amem_cfg_ctrl;	/* 0x50 */
+	u32 expi_clk_cfg;	/* 0x54 */
+	u32 reserved_1;		/* 0x58 */
+	u32 clcd_synth_clk;	/* 0x5C */
+	u32 irda_synth_clk;	/* 0x60 */
+	u32 uart_synth_clk;	/* 0x64 */
+	u32 gmac_synth_clk;	/* 0x68 */
+	u32 ras_synth1_clk;	/* 0x6C */
+	u32 ras_synth2_clk;	/* 0x70 */
+	u32 ras_synth3_clk;	/* 0x74 */
+	u32 ras_synth4_clk;	/* 0x78 */
+	u32 arb_icm_ml1;	/* 0x7C */
+	u32 arb_icm_ml2;	/* 0x80 */
+	u32 arb_icm_ml3;	/* 0x84 */
+	u32 arb_icm_ml4;	/* 0x88 */
+	u32 arb_icm_ml5;	/* 0x8C */
+	u32 arb_icm_ml6;	/* 0x90 */
+	u32 arb_icm_ml7;	/* 0x94 */
+	u32 arb_icm_ml8;	/* 0x98 */
+	u32 arb_icm_ml9;	/* 0x9C */
+	u32 dma_src_sel;	/* 0xA0 */
+	u32 uphy_ctr_reg;	/* 0xA4 */
+	u32 gmac_ctr_reg;	/* 0xA8 */
+	u32 port_bridge_ctrl;	/* 0xAC */
+	u32 reserved_2[4];	/* 0xB0--0xBC */
+	u32 prc1_ilck_ctrl_reg;	/* 0xC0 */
+	u32 prc2_ilck_ctrl_reg;	/* 0xC4 */
+	u32 prc3_ilck_ctrl_reg;	/* 0xC8 */
+	u32 prc4_ilck_ctrl_reg;	/* 0xCC */
+	u32 prc1_intr_ctrl_reg;	/* 0xD0 */
+	u32 prc2_intr_ctrl_reg;	/* 0xD4 */
+	u32 prc3_intr_ctrl_reg;	/* 0xD8 */
+	u32 prc4_intr_ctrl_reg;	/* 0xDC */
+	u32 powerdown_cfg_reg;	/* 0xE0 */
+	u32 ddr_1v8_compensation;	/* 0xE4  */
+	u32 ddr_2v5_compensation;	/* 0xE8 */
+	u32 core_3v3_compensation;	/* 0xEC */
+	u32 ddr_pad;		/* 0xF0 */
+	u32 bist1_ctr_reg;	/* 0xF4 */
+	u32 bist2_ctr_reg;	/* 0xF8 */
+	u32 bist3_ctr_reg;	/* 0xFC */
+	u32 bist4_ctr_reg;	/* 0x100 */
+	u32 bist5_ctr_reg;	/* 0x104 */
+	u32 bist1_rslt_reg;	/* 0x108 */
+	u32 bist2_rslt_reg;	/* 0x10C */
+	u32 bist3_rslt_reg;	/* 0x110 */
+	u32 bist4_rslt_reg;	/* 0x114 */
+	u32 bist5_rslt_reg;	/* 0x118 */
+	u32 syst_error_reg;	/* 0x11C */
+	u32 reserved_3[0x1FB8];	/* 0x120--0x7FFC */
+	u32 ras_gpp1_in;	/* 0x8000 */
+	u32 ras_gpp2_in;	/* 0x8004 */
+	u32 ras_gpp1_out;	/* 0x8008 */
+	u32 ras_gpp2_out;	/* 0x800C */
+};
+
+/* SYNTH_CLK value*/
+#define SYNTH23			0x00020003
+
+/* PLLx_FRQ value */
+#if defined(CONFIG_SPEAR3XX)
+#define FREQ_332		0xA600010C
+#define FREQ_266		0x8500010C
+#elif defined(CONFIG_SPEAR600)
+#define FREQ_332		0xA600010F
+#define FREQ_266		0x8500010F
+#endif
+
+/* PLL_CTR_REG   */
+#define MEM_CLK_SEL_MSK		0x70000000
+#define MEM_CLK_HCLK		0x00000000
+#define MEM_CLK_2HCLK		0x10000000
+#define MEM_CLK_PLL2		0x30000000
+
+#define EXPI_CLK_CFG_LOW_COMPR	0x2000
+#define EXPI_CLK_CFG_CLK_EN	0x0400
+#define EXPI_CLK_CFG_RST	0x0200
+#define EXPI_CLK_SYNT_EN	0x0010
+#define EXPI_CLK_CFG_SEL_PLL2	0x0004
+#define EXPI_CLK_CFG_INT_CLK_EN	0x0001
+
+#define PLL2_CNTL_6UA		0x1c00
+#define PLL2_CNTL_SAMPLE	0x0008
+#define PLL2_CNTL_ENABLE	0x0004
+#define PLL2_CNTL_RESETN	0x0002
+#define PLL2_CNTL_LOCK		0x0001
+
+/* AUTO_CFG_REG value */
+#define MISC_SOCCFGMSK                  0x0000003F
+#define MISC_SOCCFG30                   0x0000000C
+#define MISC_SOCCFG31                   0x0000000D
+#define MISC_NANDDIS			0x00020000
+
+/* PERIPH_CLK_CFG value */
+#define MISC_GPT3SYNTH			0x00000400
+#define MISC_GPT4SYNTH			0x00000800
+#define CONFIG_SPEAR_UART48M		0
+#define CONFIG_SPEAR_UARTCLKMSK		(0x1 << 4)
+
+/* PRSC_CLK_CFG value */
+/*
+ * Fout = Fin / (2^(N+1) * (M + 1))
+ */
+#define MISC_PRSC_N_1			0x00001000
+#define MISC_PRSC_M_9			0x00000009
+#define MISC_PRSC_N_4			0x00004000
+#define MISC_PRSC_M_399			0x0000018F
+#define MISC_PRSC_N_6			0x00006000
+#define MISC_PRSC_M_2593		0x00000A21
+#define MISC_PRSC_M_124			0x0000007C
+#define MISC_PRSC_CFG			(MISC_PRSC_N_1 | MISC_PRSC_M_9)
+
+/* PERIPH1_CLKEN, PERIPH1_RST value */
+#define MISC_USBDENB			0x01000000
+#define MISC_ETHENB			0x00800000
+#define MISC_SMIENB			0x00200000
+#define MISC_GPIO3ENB			0x00040000
+#define MISC_GPT3ENB			0x00010000
+#define MISC_SSP3ENB			0x00004000
+#define MISC_GPIO4ENB			0x00002000
+#define MISC_GPT2ENB			0x00000800
+#define MISC_FSMCENB			0x00000200
+#define MISC_I2CENB			0x00000080
+#define MISC_SSP2ENB			0x00000040
+#define MISC_SSP1ENB			0x00000020
+#define MISC_UART0ENB			0x00000008
+
+/*   PERIPH_CLK_CFG   */
+#define  XTALTIMEEN		0x00000001
+#define  PLLTIMEEN		0x00000002
+#define  CLCDCLK_SYNTH		0x00000000
+#define  CLCDCLK_48MHZ		0x00000004
+#define  CLCDCLK_EXT		0x00000008
+#define  UARTCLK_MASK		(0x1 << 4)
+#define  UARTCLK_48MHZ		0x00000000
+#define  UARTCLK_SYNTH		0x00000010
+#define  IRDACLK_48MHZ		0x00000000
+#define  IRDACLK_SYNTH		0x00000020
+#define  IRDACLK_EXT		0x00000040
+#define  RTC_DISABLE		0x00000080
+#define  GPT1CLK_48MHZ		0x00000000
+#define  GPT1CLK_SYNTH		0x00000100
+#define  GPT2CLK_48MHZ		0x00000000
+#define  GPT2CLK_SYNTH		0x00000200
+#define  GPT3CLK_48MHZ		0x00000000
+#define  GPT3CLK_SYNTH		0x00000400
+#define  GPT4CLK_48MHZ		0x00000000
+#define  GPT4CLK_SYNTH		0x00000800
+#define  GPT5CLK_48MHZ		0x00000000
+#define  GPT5CLK_SYNTH		0x00001000
+#define  GPT1_FREEZE		0x00002000
+#define  GPT2_FREEZE		0x00004000
+#define  GPT3_FREEZE		0x00008000
+#define  GPT4_FREEZE		0x00010000
+#define  GPT5_FREEZE		0x00020000
+
+/*  PERIPH1_CLKEN bits  */
+#define PERIPH_ARM1_WE		0x00000001
+#define PERIPH_ARM1		0x00000002
+#define PERIPH_ARM2		0x00000004
+#define PERIPH_UART1		0x00000008
+#define PERIPH_UART2		0x00000010
+#define PERIPH_SSP1		0x00000020
+#define PERIPH_SSP2		0x00000040
+#define PERIPH_I2C		0x00000080
+#define PERIPH_JPEG		0x00000100
+#define PERIPH_FSMC		0x00000200
+#define PERIPH_FIRDA		0x00000400
+#define PERIPH_GPT4		0x00000800
+#define PERIPH_GPT5		0x00001000
+#define PERIPH_GPIO4		0x00002000
+#define PERIPH_SSP3		0x00004000
+#define PERIPH_ADC		0x00008000
+#define PERIPH_GPT3		0x00010000
+#define PERIPH_RTC		0x00020000
+#define PERIPH_GPIO3		0x00040000
+#define PERIPH_DMA		0x00080000
+#define PERIPH_ROM		0x00100000
+#define PERIPH_SMI		0x00200000
+#define PERIPH_CLCD		0x00400000
+#define PERIPH_GMAC		0x00800000
+#define PERIPH_USBD		0x01000000
+#define PERIPH_USBH1		0x02000000
+#define PERIPH_USBH2		0x04000000
+#define PERIPH_MPMC		0x08000000
+#define PERIPH_RAMW		0x10000000
+#define PERIPH_MPMC_EN		0x20000000
+#define PERIPH_MPMC_WE		0x40000000
+#define PERIPH_MPMCMSK		0x60000000
+
+#define PERIPH_CLK_ALL		0x0FFFFFF8
+#define PERIPH_RST_ALL		0x00000004
+
+/* DDR_PAD values */
+#define DDR_PAD_CNF_MSK		0x0000ffff
+#define DDR_PAD_SW_CONF		0x00060000
+#define DDR_PAD_SSTL_SEL	0x00000001
+#define DDR_PAD_DRAM_TYPE	0x00008000
+
+/* DDR_COMP values */
+#define DDR_COMP_ACCURATE	0x00000010
+
+/* SoC revision stuff */
+#define SOC_PRI_SHFT		16
+#define SOC_SEC_SHFT		8
+
+/* Revision definitions */
+#define SOC_SPEAR_NA		0
+
+/*
+ * The definitons have started from
+ * 101 for SPEAr6xx
+ * 201 for SPEAr3xx
+ * 301 for SPEAr13xx
+ */
+#define SOC_SPEAR600_AA		101
+#define SOC_SPEAR600_AB		102
+#define SOC_SPEAR600_BA		103
+#define SOC_SPEAR600_BB		104
+#define SOC_SPEAR600_BC		105
+#define SOC_SPEAR600_BD		106
+
+#define SOC_SPEAR300		201
+#define SOC_SPEAR310		202
+#define SOC_SPEAR320		203
+
+extern int get_socrev(void);
+int fsmc_nand_switch_ecc(uint32_t eccstrength);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/spr_ssp.h b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_ssp.h
new file mode 100644
index 000000000..088d34b40
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_ssp.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ */
+
+#ifndef _SPR_SSP_H
+#define _SPR_SSP_H
+
+struct ssp_regs {
+	u32 sspcr0;
+	u32 sspcr1;
+	u32 sspdr;
+	u32 sspsr;
+	u32 sspcpsr;
+	u32 sspimsc;
+	u32 sspicr;
+	u32 sspdmacr;
+};
+
+#define SSPCR0_FRF_MOT_SPI	0x0000
+#define SSPCR0_DSS_16BITS	0x000f
+
+#define SSPCR1_SSE		0x0002
+
+#define SSPSR_TNF		0x2
+#define SSPSR_TFE		0x1
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-spear/spr_syscntl.h b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_syscntl.h
new file mode 100644
index 000000000..6a83d87d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-spear/spr_syscntl.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Ryan CHEN, ST Micoelectronics, ryan.chen@st.com
+ */
+
+#ifndef __SYSCTRL_H
+#define __SYSCTRL_H
+
+struct syscntl_regs {
+	u32 scctrl;
+	u32 scsysstat;
+	u32 scimctrl;
+	u32 scimsysstat;
+	u32 scxtalctrl;
+	u32 scpllctrl;
+	u32 scpllfctrl;
+	u32 scperctrl0;
+	u32 scperctrl1;
+	u32 scperen;
+	u32 scperdis;
+	const u32 scperclken;
+	const u32 scperstat;
+};
+
+#define MODE_SHIFT          0x00000003
+
+#define NORMAL              0x00000004
+#define SLOW                0x00000002
+#define DOZE                0x00000001
+#define SLEEP               0x00000000
+
+#define PLL_TIM             0x01FFFFFF
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stih410/sdhci.h b/roms/u-boot/arch/arm/include/asm/arch-stih410/sdhci.h
new file mode 100644
index 000000000..1735c0e39
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stih410/sdhci.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#ifndef __STI_SDHCI_H__
+#define __STI_SDHCI_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define FLASHSS_MMC_CORE_CONFIG_1			0x400
+#define FLASHSS_MMC_CORECFG_TIMEOUT_CLK_UNIT_MHZ	BIT(24)
+#define FLASHSS_MMC_CORECFG_TIMEOUT_CLK_FREQ_MIN	BIT(12)
+
+#define STI_FLASHSS_MMC_CORE_CONFIG_1			\
+	(FLASHSS_MMC_CORECFG_TIMEOUT_CLK_UNIT_MHZ	| \
+	 FLASHSS_MMC_CORECFG_TIMEOUT_CLK_FREQ_MIN)
+
+#define FLASHSS_MMC_CORE_CONFIG_2			0x404
+#define FLASHSS_MMC_CORECFG_HIGH_SPEED			BIT(28)
+#define FLASHSS_MMC_CORECFG_8BIT_EMMC			BIT(20)
+#define MAX_BLK_LENGTH_1024				BIT(16)
+#define BASE_CLK_FREQ_200				0xc8
+
+#define STI_FLASHSS_MMC_CORE_CONFIG2	\
+	(FLASHSS_MMC_CORECFG_HIGH_SPEED	| \
+	 FLASHSS_MMC_CORECFG_8BIT_EMMC	| \
+	 MAX_BLK_LENGTH_1024		| \
+	 BASE_CLK_FREQ_200 << 0)
+
+#define STI_FLASHSS_SDCARD_CORE_CONFIG2			\
+	(FLASHSS_MMC_CORECFG_HIGH_SPEED			| \
+	 MAX_BLK_LENGTH_1024				| \
+	 BASE_CLK_FREQ_200)
+
+#define FLASHSS_MMC_CORE_CONFIG_3			0x408
+#define FLASHSS_MMC_CORECFG_SLOT_TYPE_EMMC		BIT(28)
+#define FLASHSS_MMC_CORECFG_ASYNCH_INTR_SUPPORT		BIT(20)
+#define FLASHSS_MMC_CORECFG_3P3_VOLT			BIT(8)
+#define FLASHSS_MMC_CORECFG_SUSP_RES_SUPPORT		BIT(4)
+#define FLASHSS_MMC_CORECFG_SDMA			BIT(0)
+
+#define STI_FLASHSS_MMC_CORE_CONFIG3			\
+	 (FLASHSS_MMC_CORECFG_SLOT_TYPE_EMMC		| \
+	 FLASHSS_MMC_CORECFG_ASYNCH_INTR_SUPPORT	| \
+	 FLASHSS_MMC_CORECFG_3P3_VOLT			| \
+	 FLASHSS_MMC_CORECFG_SUSP_RES_SUPPORT		| \
+	 FLASHSS_MMC_CORECFG_SDMA)
+
+#define STI_FLASHSS_SDCARD_CORE_CONFIG3			\
+	 (FLASHSS_MMC_CORECFG_ASYNCH_INTR_SUPPORT	| \
+	 FLASHSS_MMC_CORECFG_3P3_VOLT			| \
+	 FLASHSS_MMC_CORECFG_SUSP_RES_SUPPORT		| \
+	 FLASHSS_MMC_CORECFG_SDMA)
+
+#define FLASHSS_MMC_CORE_CONFIG_4			0x40c
+#define FLASHSS_MMC_CORECFG_D_DRIVER_SUPPORT		BIT(20)
+#define FLASHSS_MMC_CORECFG_C_DRIVER_SUPPORT		BIT(16)
+#define FLASHSS_MMC_CORECFG_A_DRIVER_SUPPORT		BIT(12)
+
+#define STI_FLASHSS_MMC_CORE_CONFIG4			\
+	(FLASHSS_MMC_CORECFG_D_DRIVER_SUPPORT		| \
+	 FLASHSS_MMC_CORECFG_C_DRIVER_SUPPORT		| \
+	 FLASHSS_MMC_CORECFG_A_DRIVER_SUPPORT)
+
+#define ST_MMC_CCONFIG_REG_5		0x210
+#define SYSCONF_MMC1_ENABLE_BIT		3
+
+#endif	/* _STI_SDHCI_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stih410/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-stih410/sys_proto.h
new file mode 100644
index 000000000..30e7f398e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stih410/sys_proto.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#ifndef _ASM_ARCH_SYS_PROTO_H
+#define _ASM_ARCH_SYS_PROTO_H
+
+#endif /* _ASM_ARCH_SYS_PROTO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-stm32/gpio.h
new file mode 100644
index 000000000..233ce278a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32/gpio.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _GPIO_H_
+#define _GPIO_H_
+
+enum stm32_gpio_mode {
+	STM32_GPIO_MODE_IN = 0,
+	STM32_GPIO_MODE_OUT,
+	STM32_GPIO_MODE_AF,
+	STM32_GPIO_MODE_AN
+};
+
+enum stm32_gpio_otype {
+	STM32_GPIO_OTYPE_PP = 0,
+	STM32_GPIO_OTYPE_OD
+};
+
+enum stm32_gpio_speed {
+	STM32_GPIO_SPEED_2M = 0,
+	STM32_GPIO_SPEED_25M,
+	STM32_GPIO_SPEED_50M,
+	STM32_GPIO_SPEED_100M
+};
+
+enum stm32_gpio_pupd {
+	STM32_GPIO_PUPD_NO = 0,
+	STM32_GPIO_PUPD_UP,
+	STM32_GPIO_PUPD_DOWN
+};
+
+enum stm32_gpio_af {
+	STM32_GPIO_AF0 = 0,
+	STM32_GPIO_AF1,
+	STM32_GPIO_AF2,
+	STM32_GPIO_AF3,
+	STM32_GPIO_AF4,
+	STM32_GPIO_AF5,
+	STM32_GPIO_AF6,
+	STM32_GPIO_AF7,
+	STM32_GPIO_AF8,
+	STM32_GPIO_AF9,
+	STM32_GPIO_AF10,
+	STM32_GPIO_AF11,
+	STM32_GPIO_AF12,
+	STM32_GPIO_AF13,
+	STM32_GPIO_AF14,
+	STM32_GPIO_AF15
+};
+
+struct stm32_gpio_dsc {
+	u8	port;
+	u8	pin;
+};
+
+struct stm32_gpio_ctl {
+	enum stm32_gpio_mode	mode;
+	enum stm32_gpio_otype	otype;
+	enum stm32_gpio_speed	speed;
+	enum stm32_gpio_pupd	pupd;
+	enum stm32_gpio_af	af;
+};
+
+struct stm32_gpio_regs {
+	u32 moder;	/* GPIO port mode */
+	u32 otyper;	/* GPIO port output type */
+	u32 ospeedr;	/* GPIO port output speed */
+	u32 pupdr;	/* GPIO port pull-up/pull-down */
+	u32 idr;	/* GPIO port input data */
+	u32 odr;	/* GPIO port output data */
+	u32 bsrr;	/* GPIO port bit set/reset */
+	u32 lckr;	/* GPIO port configuration lock */
+	u32 afr[2];	/* GPIO alternate function */
+};
+
+struct stm32_gpio_priv {
+	struct stm32_gpio_regs *regs;
+	unsigned int gpio_range;
+};
+
+int stm32_offset_to_index(struct udevice *dev, unsigned int offset);
+
+#endif /* _GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32/stm32f.h b/roms/u-boot/arch/arm/include/asm/arch-stm32/stm32f.h
new file mode 100644
index 000000000..a1ce81eca
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32/stm32f.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#ifndef _ASM_ARCH_STM32F_H
+#define _ASM_ARCH_STM32F_H
+
+#define STM32_PERIPH_BASE	0x40000000UL
+
+#define STM32_APB2_PERIPH_BASE	(STM32_PERIPH_BASE + 0x00010000)
+#define STM32_AHB1_PERIPH_BASE	(STM32_PERIPH_BASE + 0x00020000)
+
+#define STM32_SYSCFG_BASE	(STM32_APB2_PERIPH_BASE + 0x3800)
+#define STM32_FLASH_CNTL_BASE	(STM32_AHB1_PERIPH_BASE + 0x3C00)
+
+void stm32_flash_latency_cfg(int latency);
+
+#endif /* _ASM_ARCH_STM32F_H */
+
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32f4/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-stm32f4/gpio.h
new file mode 100644
index 000000000..490f686a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32f4/gpio.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+
+#include <asm/arch-stm32/gpio.h>
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32f4/stm32.h b/roms/u-boot/arch/arm/include/asm/arch-stm32f4/stm32.h
new file mode 100644
index 000000000..2094bd732
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32f4/stm32.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ */
+
+#ifndef _MACH_STM32_H_
+#define _MACH_STM32_H_
+
+#include <asm/arch-stm32/stm32f.h>
+
+/*
+ * Peripheral memory map
+ */
+#define STM32_SYSMEM_BASE	0x1FFF0000
+
+/*
+ * Register maps
+ */
+struct stm32_u_id_regs {
+	u32 u_id_low;
+	u32 u_id_mid;
+	u32 u_id_high;
+};
+
+/*
+ * Registers access macros
+ */
+#define STM32_U_ID_BASE		(STM32_SYSMEM_BASE + 0x7A10)
+#define STM32_U_ID		((struct stm32_u_id_regs *)STM32_U_ID_BASE)
+static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
+	[0 ... 3] =	16 * 1024,
+	[4] =		64 * 1024,
+	[5 ... 11] =	128 * 1024
+};
+
+#endif /* _MACH_STM32_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h b/roms/u-boot/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h
new file mode 100644
index 000000000..fe6ca03d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#ifndef __STM32_PWR_H_
+#define __STM32_PWR_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/*
+ * Offsets of some PWR registers
+ */
+#define PWR_CR1_ODEN			BIT(16)
+#define PWR_CR1_ODSWEN			BIT(17)
+#define PWR_CSR1_ODRDY			BIT(16)
+#define PWR_CSR1_ODSWRDY		BIT(17)
+
+struct stm32_pwr_regs {
+	u32 cr1;   /* power control register 1 */
+	u32 csr1;  /* power control/status register 2 */
+};
+
+#endif /* __STM32_PWR_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32f7/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-stm32f7/gpio.h
new file mode 100644
index 000000000..21f4e0fd2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32f7/gpio.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+
+#include <asm/arch-stm32/gpio.h>
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32f7/stm32.h b/roms/u-boot/arch/arm/include/asm/arch-stm32f7/stm32.h
new file mode 100644
index 000000000..3451e74a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32f7/stm32.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#include <asm/arch-stm32/stm32f.h>
+
+static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
+	[0 ... 3] =	32 * 1024,
+	[4] =		128 * 1024,
+	[5 ... 7] =	256 * 1024
+};
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h b/roms/u-boot/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h
new file mode 100644
index 000000000..5cd6553d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#ifndef __STM32_PWR_H_
+#define __STM32_PWR_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/*
+ * Offsets of some PWR registers
+ */
+#define PWR_CR1_ODEN			BIT(16)
+#define PWR_CR1_ODSWEN			BIT(17)
+#define PWR_CSR1_ODRDY			BIT(16)
+#define PWR_CSR1_ODSWRDY		BIT(17)
+
+struct stm32_pwr_regs {
+	u32 cr1;   /* power control register 1 */
+	u32 csr1;  /* power control/status register 2 */
+	u32 cr2;   /* power control register 2 */
+	u32 csr2;  /* power control/status register 2 */
+};
+
+#endif /* __STM32_PWR_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32f7/syscfg.h b/roms/u-boot/arch/arm/include/asm/arch-stm32f7/syscfg.h
new file mode 100644
index 000000000..985ae2544
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32f7/syscfg.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016
+ * Michael Kurz, michi.kurz@gmail.com.
+ */
+
+#ifndef _STM32_SYSCFG_H
+#define _STM32_SYSCFG_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct stm32_syscfg_regs {
+	u32 memrmp;
+	u32 pmc;
+	u32 exticr1;
+	u32 exticr2;
+	u32 exticr3;
+	u32 exticr4;
+	u32 cmpcr;
+};
+
+/*
+ * SYSCFG registers base
+ */
+#define STM32_SYSCFG		((struct stm32_syscfg_regs *)STM32_SYSCFG_BASE)
+
+/* SYSCFG peripheral mode configuration register */
+#define SYSCFG_PMC_MII_RMII_SEL	BIT(23)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32h7/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-stm32h7/gpio.h
new file mode 100644
index 000000000..4f57f175f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32h7/gpio.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+
+#include <asm/arch-stm32/gpio.h>
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stm32h7/stm32.h b/roms/u-boot/arch/arm/include/asm/arch-stm32h7/stm32.h
new file mode 100644
index 000000000..2b0a67000
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stm32h7/stm32.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+/*
+ * This empty files is needed to not break compilation
+ * Some common drivers to STM32F4/F7 and H7 include a stm32.h file
+ * Some cleanup need to be done to communalize all the following
+ * stm32.h files:
+ *
+ * arch/arm/include/asm/arch-stm32f1/stm32.h
+ * arch/arm/include/asm/arch-stm32f4/stm32.h
+ * arch/arm/include/asm/arch-stm32f7/stm32.h
+ */
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stv0991/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-stv0991/gpio.h
new file mode 100644
index 000000000..b27f40785
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stv0991/gpio.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef __ASM_ARCH_STV0991_GPIO_H
+#define __ASM_ARCH_STV0991_GPIO_H
+
+enum gpio_direction {
+	GPIO_DIRECTION_IN,
+	GPIO_DIRECTION_OUT,
+};
+
+struct gpio_regs {
+	u32 data;		/* offset 0x0 */
+	u32 reserved[0xff];	/* 0x4--0x3fc */
+	u32 dir;		/* offset 0x400 */
+};
+
+#endif	/* __ASM_ARCH_STV0991_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stv0991/hardware.h b/roms/u-boot/arch/arm/include/asm/arch-stv0991/hardware.h
new file mode 100644
index 000000000..ea8f82063
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stv0991/hardware.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+/* STV0991 */
+#define SRAM0_BASE_ADDR                          0x00000000UL
+#define SRAM1_BASE_ADDR                          0x00068000UL
+#define SRAM2_BASE_ADDR                          0x000D0000UL
+#define SRAM3_BASE_ADDR                          0x00138000UL
+#define CFS_SRAM0_BASE_ADDR                      0x00198000UL
+#define CFS_SRAM1_BASE_ADDR                      0x001B8000UL
+#define FAST_SRAM_BASE_ADDR                      0x001D8000UL
+#define FLASH_BASE_ADDR                          0x40000000UL
+#define PL310_BASE_ADDR                          0x70000000UL
+#define HSAXIM_BASE_ADDR                         0x70100000UL
+#define IMGSS_BASE_ADDR                          0x70200000UL
+#define ADC_BASE_ADDR                            0x80000000UL
+#define GPIOA_BASE_ADDR                          0x80001000UL
+#define GPIOB_BASE_ADDR                          0x80002000UL
+#define GPIOC_BASE_ADDR                          0x80003000UL
+#define HDM_BASE_ADDR                            0x80004000UL
+#define THSENS_BASE_ADDR                         0x80200000UL
+#define GPTIMER2_BASE_ADDR                       0x80201000UL
+#define GPTIMER1_BASE_ADDR                       0x80202000UL
+#define QSPI_BASE_ADDR                           0x80203000UL
+#define CGU_BASE_ADDR                            0x80204000UL
+#define CREG_BASE_ADDR                           0x80205000UL
+#define PEC_BASE_ADDR                            0x80206000UL
+#define WDRU_BASE_ADDR                           0x80207000UL
+#define BSEC_BASE_ADDR                           0x80208000UL
+#define DAP_ROM_BASE_ADDR                        0x80210000UL
+#define SOC_CTI_BASE_ADDR                        0x80211000UL
+#define TPIU_BASE_ADDR                           0x80212000UL
+#define TMC_ETF_BASE_ADDR                        0x80213000UL
+#define R4_ETM_BASE_ADDR                         0x80214000UL
+#define R4_CTI_BASE_ADDR                         0x80215000UL
+#define R4_DBG_BASE_ADDR                         0x80216000UL
+#define GMAC_BASE_ADDR                           0x80300000UL
+#define RNSS_BASE_ADDR                           0x80302000UL
+#define CRYP_BASE_ADDR                           0x80303000UL
+#define HASH_BASE_ADDR                           0x80304000UL
+#define GPDMA_BASE_ADDR                          0x80305000UL
+#define ISA_BASE_ADDR                            0x8032A000UL
+#define HCI_BASE_ADDR                            0x80400000UL
+#define I2C1_BASE_ADDR                           0x80401000UL
+#define I2C2_BASE_ADDR                           0x80402000UL
+#define SAI_BASE_ADDR                            0x80403000UL
+#define USI_BASE_ADDR                            0x80404000UL
+#define SPI1_BASE_ADDR                           0x80405000UL
+#define UART_BASE_ADDR                           0x80406000UL
+#define SPI2_BASE_ADDR                           0x80500000UL
+#define CAN_BASE_ADDR                            0x80501000UL
+#define USART1_BASE_ADDR                         0x80502000UL
+#define USART2_BASE_ADDR                         0x80503000UL
+#define USART3_BASE_ADDR                         0x80504000UL
+#define USART4_BASE_ADDR                         0x80505000UL
+#define USART5_BASE_ADDR                         0x80506000UL
+#define USART6_BASE_ADDR                         0x80507000UL
+#define SDI2_BASE_ADDR                           0x80600000UL
+#define SDI1_BASE_ADDR                           0x80601000UL
+#define VICA_BASE_ADDR                           0x81000000UL
+#define VICB_BASE_ADDR                           0x81001000UL
+#define STM_CHANNELS_BASE_ADDR                   0x81100000UL
+#define STM_BASE_ADDR                            0x81110000UL
+#define SROM_BASE_ADDR                           0xFFFF0000UL
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h
new file mode 100644
index 000000000..df9dd54e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _STV0991_CGU_H
+#define _STV0991_CGU_H
+
+struct stv0991_cgu_regs {
+	u32 cpu_freq;		/* offset 0x0 */
+	u32 icn2_freq;		/* offset 0x4 */
+	u32 dma_freq;		/* offset 0x8 */
+	u32 isp_freq;		/* offset 0xc */
+	u32 h264_freq;		/* offset 0x10 */
+	u32 osif_freq;		/* offset 0x14 */
+	u32 ren_freq;		/* offset 0x18 */
+	u32 tim_freq;		/* offset 0x1c */
+	u32 sai_freq;		/* offset 0x20 */
+	u32 eth_freq;		/* offset 0x24 */
+	u32 i2c_freq;		/* offset 0x28 */
+	u32 spi_freq;		/* offset 0x2c */
+	u32 uart_freq;		/* offset 0x30 */
+	u32 qspi_freq;		/* offset 0x34 */
+	u32 sdio_freq;		/* offset 0x38 */
+	u32 usi_freq;		/* offset 0x3c */
+	u32 can_line_freq;	/* offset 0x40 */
+	u32 debug_freq;		/* offset 0x44 */
+	u32 trace_freq;		/* offset 0x48 */
+	u32 stm_freq;		/* offset 0x4c */
+	u32 eth_ctrl;		/* offset 0x50 */
+	u32 reserved[3];	/* offset 0x54 */
+	u32 osc_ctrl;		/* offset 0x60 */
+	u32 pll1_ctrl;		/* offset 0x64 */
+	u32 pll1_freq;		/* offset 0x68 */
+	u32 pll1_fract;		/* offset 0x6c */
+	u32 pll1_spread;	/* offset 0x70 */
+	u32 pll1_status;	/* offset 0x74 */
+	u32 pll2_ctrl;		/* offset 0x78 */
+	u32 pll2_freq;		/* offset 0x7c */
+	u32 pll2_fract;		/* offset 0x80 */
+	u32 pll2_spread;	/* offset 0x84 */
+	u32 pll2_status;	/* offset 0x88 */
+	u32 cgu_enable_1;	/* offset 0x8c */
+	u32 cgu_enable_2;	/* offset 0x90 */
+	u32 cgu_isp_pulse;	/* offset 0x94 */
+	u32 cgu_h264_pulse;	/* offset 0x98 */
+	u32 cgu_osif_pulse;	/* offset 0x9c */
+	u32 cgu_ren_pulse;	/* offset 0xa0 */
+
+};
+
+/* CGU Timer */
+#define CLK_TMR_OSC			0
+#define CLK_TMR_MCLK			1
+#define CLK_TMR_PLL1			2
+#define CLK_TMR_PLL2			3
+#define MDIV_SHIFT_TMR			3
+#define DIV_SHIFT_TMR			6
+
+#define TIMER1_CLK_CFG			(0 << DIV_SHIFT_TMR \
+					| 0 << MDIV_SHIFT_TMR | CLK_TMR_MCLK)
+
+/* Clock Enable/Disable */
+
+#define TIMER1_CLK_EN			(1 << 15)
+
+/* CGU Uart config */
+#define CLK_UART_MCLK			0
+#define CLK_UART_PLL1			1
+#define CLK_UART_PLL2			2
+
+#define MDIV_SHIFT_UART			3
+#define DIV_SHIFT_UART			6
+
+#define UART_CLK_CFG			(4 << DIV_SHIFT_UART \
+					| 1 << MDIV_SHIFT_UART | CLK_UART_MCLK)
+
+/* CGU Ethernet clock config */
+#define CLK_ETH_MCLK			0
+#define CLK_ETH_PLL1			1
+#define CLK_ETH_PLL2			2
+
+#define MDIV_SHIFT_ETH			3
+#define DIV_SHIFT_ETH			6
+#define DIV_ETH_125			9
+#define DIV_ETH_50			12
+#define DIV_ETH_P2P			15
+
+#define ETH_CLK_CFG			(4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \
+					| 1 << DIV_ETH_125 \
+					| 0 << DIV_SHIFT_ETH \
+					| 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1)
+ /* CGU Ethernet control */
+
+#define ETH_CLK_TX_EXT_PHY		0
+#define ETH_CLK_TX_125M			1
+#define ETH_CLK_TX_25M			2
+#define ETH_CLK_TX_2M5			3
+#define ETH_CLK_TX_DIS			7
+
+#define ETH_CLK_RX_EXT_PHY		0
+#define ETH_CLK_RX_25M			1
+#define ETH_CLK_RX_2M5			2
+#define ETH_CLK_RX_DIS			3
+#define RX_CLK_SHIFT			3
+#define ETH_CLK_MASK			~(0x1F)
+
+#define ETH_PHY_MODE_GMII		0
+#define ETH_PHY_MODE_RMII		1
+#define ETH_PHY_CLK_DIS			1
+
+#define ETH_CLK_CTRL			(ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \
+					| ETH_CLK_TX_EXT_PHY)
+/* CGU qspi clock */
+#define DIV_HCLK1_SHIFT			9
+#define DIV_CRYP_SHIFT			6
+#define MDIV_QSPI_SHIFT			3
+
+#define CLK_QSPI_OSC			0
+#define CLK_QSPI_MCLK			1
+#define CLK_QSPI_PLL1			2
+#define CLK_QSPI_PLL2			3
+
+#define QSPI_CLK_CTRL			(3 << DIV_HCLK1_SHIFT \
+					| 1 << DIV_CRYP_SHIFT \
+					| 0 << MDIV_QSPI_SHIFT \
+					| CLK_QSPI_OSC)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h
new file mode 100644
index 000000000..4d444a6df
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _STV0991_CREG_H
+#define _STV0991_CREG_H
+
+struct stv0991_creg {
+	u32 version;		/* offset 0x0 */
+	u32 hdpctl;		/* offset 0x4 */
+	u32 hdpval;		/* offset 0x8 */
+	u32 hdpgposet;		/* offset 0xc */
+	u32 hdpgpoclr;		/* offset 0x10 */
+	u32 hdpgpoval;		/* offset 0x14 */
+	u32 stm_mux;		/* offset 0x18 */
+	u32 sysctrl_1;		/* offset 0x1c */
+	u32 sysctrl_2;		/* offset 0x20 */
+	u32 sysctrl_3;		/* offset 0x24 */
+	u32 sysctrl_4;		/* offset 0x28 */
+	u32 reserved_1[0x35];	/* offset 0x2C-0xFC */
+	u32 mux1;		/* offset 0x100 */
+	u32 mux2;		/* offset 0x104 */
+	u32 mux3;		/* offset 0x108 */
+	u32 mux4;		/* offset 0x10c */
+	u32 mux5;		/* offset 0x110 */
+	u32 mux6;		/* offset 0x114 */
+	u32 mux7;		/* offset 0x118 */
+	u32 mux8;		/* offset 0x11c */
+	u32 mux9;		/* offset 0x120 */
+	u32 mux10;		/* offset 0x124 */
+	u32 mux11;		/* offset 0x128 */
+	u32 mux12;		/* offset 0x12c */
+	u32 mux13;		/* offset 0x130 */
+	u32 reserved_2[0x33];	/* offset 0x134-0x1FC */
+	u32 cfg_pad1;		/* offset 0x200 */
+	u32 cfg_pad2;		/* offset 0x204 */
+	u32 cfg_pad3;		/* offset 0x208 */
+	u32 cfg_pad4;		/* offset 0x20c */
+	u32 cfg_pad5;		/* offset 0x210 */
+	u32 cfg_pad6;		/* offset 0x214 */
+	u32 cfg_pad7;		/* offset 0x218 */
+	u32 reserved_3[0x39];	/* offset 0x21C-0x2FC */
+	u32 vdd_pad1;		/* offset 0x300 */
+	u32 vdd_pad2;		/* offset 0x304 */
+	u32 reserved_4[0x3e];	/* offset 0x308-0x3FC */
+	u32 vdd_comp1;		/* offset 0x400 */
+};
+
+/* CREG MUX 13 register */
+#define FLASH_CS_NC_SHIFT	4
+#define FLASH_CS_NC_MASK	~(7 << FLASH_CS_NC_SHIFT)
+#define CFG_FLASH_CS_NC		(0 << FLASH_CS_NC_SHIFT)
+
+#define FLASH_CLK_SHIFT		0
+#define FLASH_CLK_MASK		~(7 << FLASH_CLK_SHIFT)
+#define CFG_FLASH_CLK		(0 << FLASH_CLK_SHIFT)
+
+/* CREG MUX 12 register */
+#define GPIOC_30_MUX_SHIFT	24
+#define GPIOC_30_MUX_MASK	~(1 << GPIOC_30_MUX_SHIFT)
+#define CFG_GPIOC_30_UART_TX	(1 << GPIOC_30_MUX_SHIFT)
+
+#define GPIOC_31_MUX_SHIFT	28
+#define GPIOC_31_MUX_MASK	~(1 << GPIOC_31_MUX_SHIFT)
+#define CFG_GPIOC_31_UART_RX	(1 << GPIOC_31_MUX_SHIFT)
+
+/* CREG MUX 7 register */
+#define GPIOB_16_MUX_SHIFT	0
+#define GPIOB_16_MUX_MASK	~(1 << GPIOB_16_MUX_SHIFT)
+#define CFG_GPIOB_16_UART_TX	(1 << GPIOB_16_MUX_SHIFT)
+
+#define GPIOB_17_MUX_SHIFT	4
+#define GPIOB_17_MUX_MASK	~(1 << GPIOB_17_MUX_SHIFT)
+#define CFG_GPIOB_17_UART_RX	(1 << GPIOB_17_MUX_SHIFT)
+
+/* CREG CFG_PAD6 register */
+
+#define GPIOC_31_MODE_SHIFT	30
+#define GPIOC_31_MODE_MASK	~(1 << GPIOC_31_MODE_SHIFT)
+#define CFG_GPIOC_31_MODE_OD	(0 << GPIOC_31_MODE_SHIFT)
+#define CFG_GPIOC_31_MODE_PP	(1 << GPIOC_31_MODE_SHIFT)
+
+#define GPIOC_30_MODE_SHIFT	28
+#define GPIOC_30_MODE_MASK	~(1 << GPIOC_30_MODE_SHIFT)
+#define CFG_GPIOC_30_MODE_LOW	(0 << GPIOC_30_MODE_SHIFT)
+#define CFG_GPIOC_30_MODE_HIGH	(1 << GPIOC_30_MODE_SHIFT)
+
+/* CREG Ethernet pad config */
+
+#define VDD_ETH_PS_1V8		0
+#define VDD_ETH_PS_2V5		2
+#define VDD_ETH_PS_3V3		3
+#define VDD_ETH_PS_MASK		0x3
+
+#define VDD_ETH_PS_SHIFT	12
+#define ETH_VDD_CFG		(VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT)
+
+#define VDD_ETH_M_PS_SHIFT	28
+#define ETH_M_VDD_CFG		(VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h
new file mode 100644
index 000000000..97d28b26f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef __STV0991_DEFS_H__
+#define __STV0991_DEFS_H__
+#include <asm/arch/stv0991_periph.h>
+
+extern int stv0991_pinmux_config(enum periph_id);
+extern int clock_setup(enum periph_clock);
+
+#endif
+
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h
new file mode 100644
index 000000000..cd27472ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _STV0991_GPT_H
+#define _STV0991_GPT_H
+
+#include <asm/arch-stv0991/hardware.h>
+
+struct gpt_regs {
+	u32 cr1;
+	u32 cr2;
+	u32 reserved_1;
+	u32 dier;	/* dma_int_en */
+	u32 sr;		/* status reg */
+	u32 egr;	/* event gen */
+	u32 reserved_2[3];	/* offset 0x18--0x20*/
+	u32 cnt;
+	u32 psc;
+	u32 arr;
+};
+
+struct gpt_regs *const gpt1_regs_ptr =
+	(struct gpt_regs *) GPTIMER1_BASE_ADDR;
+
+/* Timer control1 register  */
+#define GPT_CR1_CEN			0x0001
+#define GPT_MODE_AUTO_RELOAD		(1 << 7)
+
+/* Timer prescalar reg */
+#define GPT_PRESCALER_128		0x128
+
+/* Auto reload register for free running config */
+#define GPT_FREE_RUNNING		0xFFFF
+
+/* Timer, HZ specific defines */
+#define CONFIG_STV0991_HZ		1000
+#define CONFIG_STV0991_HZ_CLOCK		(27*1000*1000)/GPT_PRESCALER_128
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h
new file mode 100644
index 000000000..7a50be183
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+	UART_GPIOC_30_31 = 0,
+	UART_GPIOB_16_17,
+	ETH_GPIOB_10_31_C_0_4,
+	QSPI_CS_CLK_PAD,
+	PERIPH_ID_I2C0,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_I2C4,
+	PERIPH_ID_I2C5,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_I2C7,
+	PERIPH_ID_SPI0,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SPI2,
+	PERIPH_ID_SDMMC0,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_I2S1,
+};
+
+enum periph_clock {
+	UART_CLOCK_CFG = 0,
+	ETH_CLOCK_CFG,
+	QSPI_CLOCK_CFG,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h
new file mode 100644
index 000000000..8cb8a8a61
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _STV0991_WD_RST_H
+#define _STV0991_WD_RST_H
+#include <asm/arch-stv0991/hardware.h>
+
+struct stv0991_wd_ru {
+	u32 wdru_config;
+	u32 wdru_ctrl1;
+	u32 wdru_ctrl2;
+	u32 wdru_tim;
+	u32 wdru_count;
+	u32 wdru_stat;
+	u32 wdru_wrlock;
+};
+
+struct stv0991_wd_ru *const stv0991_wd_ru_ptr = \
+		(struct stv0991_wd_ru *)WDRU_BASE_ADDR;
+
+/* Watchdog control register */
+#define WDRU_RST_SYS		0x1
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/boot0.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/boot0.h
new file mode 100644
index 000000000..e8e8e38f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/boot0.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the Allwinner A64 (sun50i) CPU
+ */
+
+#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) && !defined(CONFIG_SPL_BUILD)
+/* reserve space for BOOT0 header information */
+	b	reset
+	.space	1532
+#elif defined(CONFIG_ARM_BOOT_HOOK_RMR)
+/*
+ * Switch into AArch64 if needed.
+ * Refer to arch/arm/mach-sunxi/rmr_switch.S for the original source.
+ */
+	tst     x0, x0                  // this is "b #0x84" in ARM
+	b       reset
+	.space  0x7c
+
+	.word	0xe28f0058	// add     r0, pc, #88
+	.word	0xe59f1054	// ldr     r1, [pc, #84]
+	.word	0xe0800001	// add     r0, r0, r1
+	.word	0xe580d000	// str     sp, [r0]
+	.word	0xe580e004	// str     lr, [r0, #4]
+	.word	0xe10fe000	// mrs     lr, CPSR
+	.word	0xe580e008	// str     lr, [r0, #8]
+	.word	0xee11ef10	// mrc     15, 0, lr, cr1, cr0, {0}
+	.word	0xe580e00c	// str     lr, [r0, #12]
+	.word	0xee1cef10	// mrc     15, 0, lr, cr12, cr0, {0}
+	.word	0xe580e010	// str     lr, [r0, #16]
+
+	.word	0xe59f1024	// ldr     r1, [pc, #36] ; 0x170000a0
+	.word	0xe59f0024	// ldr     r0, [pc, #36] ; CONFIG_*_TEXT_BASE
+	.word	0xe5810000	// str     r0, [r1]
+	.word	0xf57ff04f	// dsb     sy
+	.word	0xf57ff06f	// isb     sy
+	.word	0xee1c0f50	// mrc     15, 0, r0, cr12, cr0, {2} ; RMR
+	.word	0xe3800003	// orr     r0, r0, #3
+	.word	0xee0c0f50	// mcr     15, 0, r0, cr12, cr0, {2} ; RMR
+	.word	0xf57ff06f	// isb     sy
+	.word	0xe320f003	// wfi
+	.word	0xeafffffd	// b       @wfi
+#ifndef CONFIG_SUN50I_GEN_H6
+	.word	0x017000a0	// writeable RVBAR mapping address
+#else
+	.word	0x09010040	// writeable RVBAR mapping address
+#endif
+#ifdef CONFIG_SPL_BUILD
+	.word	CONFIG_SPL_TEXT_BASE
+#else
+	.word   CONFIG_SYS_TEXT_BASE
+#endif
+	.word	fel_stash - .
+#else
+/* normal execution */
+	b	reset
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/ccu.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/ccu.h
new file mode 100644
index 000000000..cac5c5faf
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/ccu.h
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#ifndef _ASM_ARCH_CCU_H
+#define _ASM_ARCH_CCU_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/**
+ * enum ccu_flags - ccu clock/reset flags
+ *
+ * @CCU_CLK_F_IS_VALID:		is given clock gate is valid?
+ * @CCU_RST_F_IS_VALID:		is given reset control is valid?
+ */
+enum ccu_flags {
+	CCU_CLK_F_IS_VALID		= BIT(0),
+	CCU_RST_F_IS_VALID		= BIT(1),
+};
+
+/**
+ * struct ccu_clk_gate - ccu clock gate
+ * @off:	gate offset
+ * @bit:	gate bit
+ * @flags:	ccu clock gate flags
+ */
+struct ccu_clk_gate {
+	u16 off;
+	u32 bit;
+	enum ccu_flags flags;
+};
+
+#define GATE(_off, _bit) {			\
+	.off = _off,				\
+	.bit = _bit,				\
+	.flags = CCU_CLK_F_IS_VALID,		\
+}
+
+/**
+ * struct ccu_reset - ccu reset
+ * @off:	reset offset
+ * @bit:	reset bit
+ * @flags:	ccu reset control flags
+ */
+struct ccu_reset {
+	u16 off;
+	u32 bit;
+	enum ccu_flags flags;
+};
+
+#define RESET(_off, _bit) {			\
+	.off = _off,				\
+	.bit = _bit,				\
+	.flags = CCU_RST_F_IS_VALID,		\
+}
+
+/**
+ * struct ccu_desc - clock control unit descriptor
+ *
+ * @gates:	clock gates
+ * @resets:	reset unit
+ */
+struct ccu_desc {
+	const struct ccu_clk_gate *gates;
+	const struct ccu_reset *resets;
+};
+
+/**
+ * struct ccu_priv - sunxi clock control unit
+ *
+ * @base:	base address
+ * @desc:	ccu descriptor
+ */
+struct ccu_priv {
+	void *base;
+	const struct ccu_desc *desc;
+};
+
+/**
+ * sunxi_clk_probe - common sunxi clock probe
+ * @dev:	clock device
+ */
+int sunxi_clk_probe(struct udevice *dev);
+
+extern struct clk_ops sunxi_clk_ops;
+
+/**
+ * sunxi_reset_bind() - reset binding
+ *
+ * @dev:       reset device
+ * @count:     reset count
+ * @return 0 success, or error value
+ */
+int sunxi_reset_bind(struct udevice *dev, ulong count);
+
+#endif /* _ASM_ARCH_CCU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock.h
new file mode 100644
index 000000000..cbbe5c7a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#ifndef _SUNXI_CLOCK_H
+#define _SUNXI_CLOCK_H
+
+#include <linux/types.h>
+
+#define CLK_GATE_OPEN			0x1
+#define CLK_GATE_CLOSE			0x0
+
+/* clock control module regs definition */
+#if defined(CONFIG_MACH_SUN8I_A83T)
+#include <asm/arch/clock_sun8i_a83t.h>
+#elif defined(CONFIG_SUN50I_GEN_H6)
+#include <asm/arch/clock_sun50i_h6.h>
+#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
+      defined(CONFIG_MACH_SUN50I)
+#include <asm/arch/clock_sun6i.h>
+#elif defined(CONFIG_MACH_SUN9I)
+#include <asm/arch/clock_sun9i.h>
+#else
+#include <asm/arch/clock_sun4i.h>
+#endif
+
+#ifndef __ASSEMBLY__
+int clock_init(void);
+int clock_twi_onoff(int port, int state);
+void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz);
+void clock_init_safe(void);
+void clock_init_sec(void);
+void clock_init_uart(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
new file mode 100644
index 000000000..2cec91cb2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
@@ -0,0 +1,362 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * sun4i, sun5i and sun7i clock register definitions
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#ifndef _SUNXI_CLOCK_SUN4I_H
+#define _SUNXI_CLOCK_SUN4I_H
+
+struct sunxi_ccm_reg {
+	u32 pll1_cfg;		/* 0x00 pll1 control */
+	u32 pll1_tun;		/* 0x04 pll1 tuning */
+	u32 pll2_cfg;		/* 0x08 pll2 control */
+	u32 pll2_tun;		/* 0x0c pll2 tuning */
+	u32 pll3_cfg;		/* 0x10 pll3 control */
+	u8 res0[0x4];
+	u32 pll4_cfg;		/* 0x18 pll4 control */
+	u8 res1[0x4];
+	u32 pll5_cfg;		/* 0x20 pll5 control */
+	u32 pll5_tun;		/* 0x24 pll5 tuning */
+	u32 pll6_cfg;		/* 0x28 pll6 control */
+	u32 pll6_tun;		/* 0x2c pll6 tuning */
+	u32 pll7_cfg;		/* 0x30 pll7 control */
+	u32 pll1_tun2;		/* 0x34 pll5 tuning2 */
+	u8 res2[0x4];
+	u32 pll5_tun2;		/* 0x3c pll5 tuning2 */
+	u8 res3[0xc];
+	u32 pll_lock_dbg;	/* 0x4c pll lock time debug */
+	u32 osc24m_cfg;		/* 0x50 osc24m control */
+	u32 cpu_ahb_apb0_cfg;	/* 0x54 cpu,ahb and apb0 divide ratio */
+	u32 apb1_clk_div_cfg;	/* 0x58 apb1 clock dividor */
+	u32 axi_gate;		/* 0x5c axi module clock gating */
+	u32 ahb_gate0;		/* 0x60 ahb module clock gating 0 */
+	u32 ahb_gate1;		/* 0x64 ahb module clock gating 1 */
+	u32 apb0_gate;		/* 0x68 apb0 module clock gating */
+	u32 apb1_gate;		/* 0x6c apb1 module clock gating */
+	u8 res4[0x10];
+	u32 nand0_clk_cfg;	/* 0x80 nand sub clock control */
+	u32 ms_sclk_cfg;	/* 0x84 memory stick sub clock control */
+	u32 sd0_clk_cfg;	/* 0x88 sd0 clock control */
+	u32 sd1_clk_cfg;	/* 0x8c sd1 clock control */
+	u32 sd2_clk_cfg;	/* 0x90 sd2 clock control */
+	u32 sd3_clk_cfg;	/* 0x94 sd3 clock control */
+	u32 ts_clk_cfg;		/* 0x98 transport stream clock control */
+	u32 ss_clk_cfg;		/* 0x9c */
+	u32 spi0_clk_cfg;	/* 0xa0 */
+	u32 spi1_clk_cfg;	/* 0xa4 */
+	u32 spi2_clk_cfg;	/* 0xa8 */
+	u32 pata_clk_cfg;	/* 0xac */
+	u32 ir0_clk_cfg;	/* 0xb0 */
+	u32 ir1_clk_cfg;	/* 0xb4 */
+	u32 iis_clk_cfg;	/* 0xb8 */
+	u32 ac97_clk_cfg;	/* 0xbc */
+	u32 spdif_clk_cfg;	/* 0xc0 */
+	u32 keypad_clk_cfg;	/* 0xc4 */
+	u32 sata_clk_cfg;	/* 0xc8 */
+	u32 usb_clk_cfg;	/* 0xcc */
+	u32 gps_clk_cfg;	/* 0xd0 */
+	u32 spi3_clk_cfg;	/* 0xd4 */
+	u8 res5[0x28];
+	u32 dram_clk_gate;	/* 0x100 */
+	u32 be0_clk_cfg;	/* 0x104 */
+	u32 be1_clk_cfg;	/* 0x108 */
+	u32 fe0_clk_cfg;	/* 0x10c */
+	u32 fe1_clk_cfg;	/* 0x110 */
+	u32 mp_clk_cfg;		/* 0x114 */
+	u32 lcd0_ch0_clk_cfg;	/* 0x118 */
+	u32 lcd1_ch0_clk_cfg;	/* 0x11c */
+	u32 csi_isp_clk_cfg;	/* 0x120 */
+	u8 res6[0x4];
+	u32 tvd_clk_reg;	/* 0x128 */
+	u32 lcd0_ch1_clk_cfg;	/* 0x12c */
+	u32 lcd1_ch1_clk_cfg;	/* 0x130 */
+	u32 csi0_clk_cfg;	/* 0x134 */
+	u32 csi1_clk_cfg;	/* 0x138 */
+	u32 ve_clk_cfg;		/* 0x13c */
+	u32 audio_codec_clk_cfg;	/* 0x140 */
+	u32 avs_clk_cfg;	/* 0x144 */
+	u32 ace_clk_cfg;	/* 0x148 */
+	u32 lvds_clk_cfg;	/* 0x14c */
+	u32 hdmi_clk_cfg;	/* 0x150 */
+	u32 mali_clk_cfg;	/* 0x154 */
+	u8 res7[0x4];
+	u32 mbus_clk_cfg;	/* 0x15c */
+	u8 res8[0x4];
+	u32 gmac_clk_cfg;	/* 0x164 */
+};
+
+/* apb1 bit field */
+#define APB1_CLK_SRC_OSC24M		(0x0 << 24)
+#define APB1_CLK_SRC_PLL6		(0x1 << 24)
+#define APB1_CLK_SRC_LOSC		(0x2 << 24)
+#define APB1_CLK_SRC_MASK		(0x3 << 24)
+#define APB1_CLK_RATE_N_1		(0x0 << 16)
+#define APB1_CLK_RATE_N_2		(0x1 << 16)
+#define APB1_CLK_RATE_N_4		(0x2 << 16)
+#define APB1_CLK_RATE_N_8		(0x3 << 16)
+#define APB1_CLK_RATE_N_MASK		(3 << 16)
+#define APB1_CLK_RATE_M(m)		(((m)-1) << 0)
+#define APB1_CLK_RATE_M_MASK            (0x1f << 0)
+
+/* apb1 gate field */
+#define APB1_GATE_UART_SHIFT	(16)
+#define APB1_GATE_UART_MASK		(0xff << APB1_GATE_UART_SHIFT)
+#define APB1_GATE_TWI_SHIFT	(0)
+#define APB1_GATE_TWI_MASK		(0xf << APB1_GATE_TWI_SHIFT)
+
+/* clock divide */
+#define AXI_DIV_SHIFT		(0)
+#define AXI_DIV_1			0
+#define AXI_DIV_2			1
+#define AXI_DIV_3			2
+#define AXI_DIV_4			3
+#define AHB_DIV_SHIFT		(4)
+#define AHB_DIV_1			0
+#define AHB_DIV_2			1
+#define AHB_DIV_4			2
+#define AHB_DIV_8			3
+#define APB0_DIV_SHIFT		(8)
+#define APB0_DIV_1			0
+#define APB0_DIV_2			1
+#define APB0_DIV_4			2
+#define APB0_DIV_8			3
+#define CPU_CLK_SRC_SHIFT	(16)
+#define CPU_CLK_SRC_OSC24M		1
+#define CPU_CLK_SRC_PLL1		2
+
+#define CCM_PLL1_CFG_ENABLE_SHIFT		31
+#define CCM_PLL1_CFG_VCO_RST_SHIFT		30
+#define CCM_PLL1_CFG_VCO_BIAS_SHIFT		26
+#define CCM_PLL1_CFG_PLL4_EXCH_SHIFT		25
+#define CCM_PLL1_CFG_BIAS_CUR_SHIFT		20
+#define CCM_PLL1_CFG_DIVP_SHIFT			16
+#define CCM_PLL1_CFG_LCK_TMR_SHIFT		13
+#define CCM_PLL1_CFG_FACTOR_N_SHIFT		8
+#define CCM_PLL1_CFG_FACTOR_K_SHIFT		4
+#define CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT	3
+#define CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT	2
+#define CCM_PLL1_CFG_FACTOR_M_SHIFT		0
+
+#define PLL1_CFG_DEFAULT	0xa1005000
+
+#if defined CONFIG_OLD_SUNXI_KERNEL_COMPAT && defined CONFIG_MACH_SUN5I
+/*
+ * Older linux-sunxi-3.4 kernels override our PLL6 setting with 300 MHz,
+ * halving the mbus frequency, so set it to 300 MHz ourselves and base the
+ * mbus divider on that.
+ */
+#define PLL6_CFG_DEFAULT	0xa1009900
+#else
+#define PLL6_CFG_DEFAULT	0xa1009911
+#endif
+
+/* nand clock */
+#define NAND_CLK_SRC_OSC24		0
+#define NAND_CLK_DIV_N			0
+#define NAND_CLK_DIV_M			0
+
+/* gps clock */
+#define GPS_SCLK_GATING_OFF		0
+#define GPS_RESET			0
+
+/* ahb clock gate bit offset */
+#define AHB_GATE_OFFSET_GPS		26
+#define AHB_GATE_OFFSET_SATA		25
+#define AHB_GATE_OFFSET_PATA		24
+#define AHB_GATE_OFFSET_SPI3		23
+#define AHB_GATE_OFFSET_SPI2		22
+#define AHB_GATE_OFFSET_SPI1		21
+#define AHB_GATE_OFFSET_SPI0		20
+#define AHB_GATE_OFFSET_TS0		18
+#define AHB_GATE_OFFSET_EMAC		17
+#define AHB_GATE_OFFSET_ACE		16
+#define AHB_GATE_OFFSET_DLL		15
+#define AHB_GATE_OFFSET_SDRAM		14
+#define AHB_GATE_OFFSET_NAND0		13
+#define AHB_GATE_OFFSET_MS		12
+#define AHB_GATE_OFFSET_MMC3		11
+#define AHB_GATE_OFFSET_MMC2		10
+#define AHB_GATE_OFFSET_MMC1		9
+#define AHB_GATE_OFFSET_MMC0		8
+#define AHB_GATE_OFFSET_MMC(n)		(AHB_GATE_OFFSET_MMC0 + (n))
+#define AHB_GATE_OFFSET_BIST		7
+#define AHB_GATE_OFFSET_DMA		6
+#define AHB_GATE_OFFSET_SS		5
+#define AHB_GATE_OFFSET_USB_OHCI1	4
+#define AHB_GATE_OFFSET_USB_EHCI1	3
+#define AHB_GATE_OFFSET_USB_OHCI0	2
+#define AHB_GATE_OFFSET_USB_EHCI0	1
+#define AHB_GATE_OFFSET_USB0		0
+
+/* ahb clock gate bit offset (second register) */
+#define AHB_GATE_OFFSET_GMAC		17
+#define AHB_GATE_OFFSET_DE_FE0		14
+#define AHB_GATE_OFFSET_DE_BE0		12
+#define AHB_GATE_OFFSET_HDMI		11
+#define AHB_GATE_OFFSET_LCD1		5
+#define AHB_GATE_OFFSET_LCD0		4
+#define AHB_GATE_OFFSET_TVE1		3
+#define AHB_GATE_OFFSET_TVE0		2
+
+#define CCM_AHB_GATE_GPS (0x1 << 26)
+#define CCM_AHB_GATE_SDRAM (0x1 << 14)
+#define CCM_AHB_GATE_DLL (0x1 << 15)
+#define CCM_AHB_GATE_ACE (0x1 << 16)
+
+#define CCM_PLL3_CTRL_M_SHIFT		0
+#define CCM_PLL3_CTRL_M_MASK		(0x7f << CCM_PLL3_CTRL_M_SHIFT)
+#define CCM_PLL3_CTRL_M(n)		(((n) & 0x7f) << 0)
+#define CCM_PLL3_CTRL_INTEGER_MODE	(0x1 << 15)
+#define CCM_PLL3_CTRL_EN		(0x1 << 31)
+
+#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0)
+#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3)
+#define CCM_PLL5_CTRL_M_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_M1(n) (((n) & 0x3) << 2)
+#define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3)
+#define CCM_PLL5_CTRL_M1_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4)
+#define CCM_PLL5_CTRL_K_SHIFT 4
+#define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3)
+#define CCM_PLL5_CTRL_K_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_LDO (0x1 << 7)
+#define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8)
+#define CCM_PLL5_CTRL_N_SHIFT 8
+#define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f)
+#define CCM_PLL5_CTRL_N_X(n) (n)
+#define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16)
+#define CCM_PLL5_CTRL_P_SHIFT 16
+#define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3)
+#define CCM_PLL5_CTRL_P_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_BW (0x1 << 18)
+#define CCM_PLL5_CTRL_VCO_GAIN (0x1 << 19)
+#define CCM_PLL5_CTRL_BIAS(n) (((n) & 0x1f) << 20)
+#define CCM_PLL5_CTRL_BIAS_MASK CCM_PLL5_CTRL_BIAS(0x1f)
+#define CCM_PLL5_CTRL_BIAS_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_VCO_BIAS (0x1 << 25)
+#define CCM_PLL5_CTRL_DDR_CLK (0x1 << 29)
+#define CCM_PLL5_CTRL_BYPASS (0x1 << 30)
+#define CCM_PLL5_CTRL_EN (0x1 << 31)
+
+#define CCM_PLL6_CTRL_EN		31
+#define CCM_PLL6_CTRL_BYPASS_EN		30
+#define CCM_PLL6_CTRL_SATA_EN_SHIFT	14
+#define CCM_PLL6_CTRL_N_SHIFT		8
+#define CCM_PLL6_CTRL_N_MASK		(0x1f << CCM_PLL6_CTRL_N_SHIFT)
+#define CCM_PLL6_CTRL_K_SHIFT		4
+#define CCM_PLL6_CTRL_K_MASK		(0x3 << CCM_PLL6_CTRL_K_SHIFT)
+
+#define CCM_GPS_CTRL_RESET (0x1 << 0)
+#define CCM_GPS_CTRL_GATE (0x1 << 1)
+
+#define CCM_DRAM_CTRL_DCLK_OUT (0x1 << 15)
+
+#define CCM_MBUS_CTRL_M(n) (((n) & 0xf) << 0)
+#define CCM_MBUS_CTRL_M_MASK CCM_MBUS_CTRL_M(0xf)
+#define CCM_MBUS_CTRL_M_X(n) ((n) - 1)
+#define CCM_MBUS_CTRL_N(n) (((n) & 0xf) << 16)
+#define CCM_MBUS_CTRL_N_MASK CCM_MBUS_CTRL_N(0xf)
+#define CCM_MBUS_CTRL_N_X(n) (((n) >> 3) ? 3 : (((n) >> 2) ? 2 : (((n) >> 1) ? 1 : 0)))
+#define CCM_MBUS_CTRL_CLK_SRC(n) (((n) & 0x3) << 24)
+#define CCM_MBUS_CTRL_CLK_SRC_MASK CCM_MBUS_CTRL_CLK_SRC(0x3)
+#define CCM_MBUS_CTRL_CLK_SRC_HOSC 0x0
+#define CCM_MBUS_CTRL_CLK_SRC_PLL6 0x1
+#define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2
+#define CCM_MBUS_CTRL_GATE (0x1 << 31)
+
+#define CCM_NAND_CTRL_M(x)		((x) - 1)
+#define CCM_NAND_CTRL_N(x)		((x) << 16)
+#define CCM_NAND_CTRL_OSCM24		(0x0 << 24)
+#define CCM_NAND_CTRL_PLL6		(0x1 << 24)
+#define CCM_NAND_CTRL_PLL5		(0x2 << 24)
+#define CCM_NAND_CTRL_ENABLE		(0x1 << 31)
+
+#define CCM_MMC_CTRL_M(x)		((x) - 1)
+#define CCM_MMC_CTRL_OCLK_DLY(x)	((x) << 8)
+#define CCM_MMC_CTRL_N(x)		((x) << 16)
+#define CCM_MMC_CTRL_SCLK_DLY(x)	((x) << 20)
+#define CCM_MMC_CTRL_OSCM24		(0x0 << 24)
+#define CCM_MMC_CTRL_PLL6		(0x1 << 24)
+#define CCM_MMC_CTRL_PLL5		(0x2 << 24)
+#define CCM_MMC_CTRL_ENABLE		(0x1 << 31)
+
+#define CCM_DRAM_GATE_OFFSET_DE_FE1	24 /* Note the order of FE1 and */
+#define CCM_DRAM_GATE_OFFSET_DE_FE0	25 /* FE0 is swapped ! */
+#define CCM_DRAM_GATE_OFFSET_DE_BE0	26
+#define CCM_DRAM_GATE_OFFSET_DE_BE1	27
+
+#define CCM_LCD_CH0_CTRL_PLL3		(0 << 24)
+#define CCM_LCD_CH0_CTRL_PLL7		(1 << 24)
+#define CCM_LCD_CH0_CTRL_PLL3_2X	(2 << 24)
+#define CCM_LCD_CH0_CTRL_PLL7_2X	(3 << 24)
+#define CCM_LCD_CH0_CTRL_MIPI_PLL	0 /* No mipi pll on sun4i/5i/7i */
+#ifdef CONFIG_MACH_SUN5I
+#define CCM_LCD_CH0_CTRL_TVE_RST	(0x1 << 29)
+#else
+#define CCM_LCD_CH0_CTRL_TVE_RST	0 /* No separate tve-rst on sun4i/7i */
+#endif
+#define CCM_LCD_CH0_CTRL_RST		(0x1 << 30)
+#define CCM_LCD_CH0_CTRL_GATE		(0x1 << 31)
+
+#define CCM_LCD_CH1_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_LCD_CH1_CTRL_HALF_SCLK1	(1 << 11)
+#define CCM_LCD_CH1_CTRL_PLL3		(0 << 24)
+#define CCM_LCD_CH1_CTRL_PLL7		(1 << 24)
+#define CCM_LCD_CH1_CTRL_PLL3_2X	(2 << 24)
+#define CCM_LCD_CH1_CTRL_PLL7_2X	(3 << 24)
+/* Enable / disable both ch1 sclk1 and sclk2 at the same time */
+#define CCM_LCD_CH1_CTRL_GATE		(0x1 << 31 | 0x1 << 15)
+
+#define CCM_LVDS_CTRL_RST		(1 << 0)
+
+#define CCM_HDMI_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_HDMI_CTRL_PLL_MASK		(3 << 24)
+#define CCM_HDMI_CTRL_PLL3		(0 << 24)
+#define CCM_HDMI_CTRL_PLL7		(1 << 24)
+#define CCM_HDMI_CTRL_PLL3_2X		(2 << 24)
+#define CCM_HDMI_CTRL_PLL7_2X		(3 << 24)
+/* No separate ddc gate on sun4i, sun5i and sun7i */
+#define CCM_HDMI_CTRL_DDC_GATE		0
+#define CCM_HDMI_CTRL_GATE		(0x1 << 31)
+
+#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
+#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
+#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
+#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
+#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
+#define CCM_GMAC_CTRL_RX_CLK_DELAY(x)	((x) << 5)
+#define CCM_GMAC_CTRL_TX_CLK_DELAY(x)	((x) << 10)
+
+#define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
+#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
+#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 6)
+#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 7)
+#define CCM_USB_CTRL_PHYGATE (0x1 << 8)
+/* These 3 are sun6i only, define them as 0 on sun4i */
+#define CCM_USB_CTRL_PHY0_CLK 0
+#define CCM_USB_CTRL_PHY1_CLK 0
+#define CCM_USB_CTRL_PHY2_CLK 0
+
+/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */
+#define CCM_DE_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_DE_CTRL_PLL_MASK		(3 << 24)
+#define CCM_DE_CTRL_PLL3		(0 << 24)
+#define CCM_DE_CTRL_PLL7		(1 << 24)
+#define CCM_DE_CTRL_PLL5P		(2 << 24)
+#define CCM_DE_CTRL_RST			(1 << 30)
+#define CCM_DE_CTRL_GATE		(1 << 31)
+
+#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int hz);
+void clock_set_pll3(unsigned int hz);
+unsigned int clock_get_pll3(void);
+unsigned int clock_get_pll5p(void);
+unsigned int clock_get_pll6(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_SUN4I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
new file mode 100644
index 000000000..62abfc4ef
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
@@ -0,0 +1,341 @@
+/*
+ * Allwinner H6 clock register definitions
+ *
+ * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_CLOCK_SUN50I_H6_H
+#define _SUNXI_CLOCK_SUN50I_H6_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct sunxi_ccm_reg {
+	u32 pll1_cfg;		/* 0x000 pll1 (cpux) control */
+	u8 reserved_0x004[12];
+	u32 pll5_cfg;		/* 0x010 pll5 (ddr) control */
+	u8 reserved_0x014[12];
+	u32 pll6_cfg;		/* 0x020 pll6 (periph0) control */
+	u8 reserved_0x020[4];
+	u32 pll_periph1_cfg;	/* 0x028 pll periph1 control */
+	u8 reserved_0x028[4];
+	u32 pll7_cfg;		/* 0x030 pll7 (gpu) control */
+	u8 reserved_0x034[12];
+	u32 pll3_cfg;		/* 0x040 pll3 (video0) control */
+	u8 reserved_0x044[4];
+	u32 pll_video1_cfg;	/* 0x048 pll video1 control */
+	u8 reserved_0x04c[12];
+	u32 pll4_cfg;		/* 0x058 pll4 (ve) control */
+	u8 reserved_0x05c[4];
+	u32 pll10_cfg;		/* 0x060 pll10 (de) control */
+	u8 reserved_0x064[12];
+	u32 pll9_cfg;		/* 0x070 pll9 (hsic) control */
+	u8 reserved_0x074[4];
+	u32 pll2_cfg;		/* 0x078 pll2 (audio) control */
+	u8 reserved_0x07c[148];
+	u32 pll5_pat;		/* 0x110 pll5 (ddr) pattern */
+	u8 reserved_0x114[20];
+	u32 pll_periph1_pat0;	/* 0x128 pll periph1 pattern0 */
+	u32 pll_periph1_pat1;	/* 0x12c pll periph1 pattern1 */
+	u32 pll7_pat0;		/* 0x130 pll7 (gpu) pattern0 */
+	u32 pll7_pat1;		/* 0x134 pll7 (gpu) pattern1 */
+	u8 reserved_0x138[8];
+	u32 pll3_pat0;		/* 0x140 pll3 (video0) pattern0 */
+	u32 pll3_pat1;		/* 0x144 pll3 (video0) pattern1 */
+	u32 pll_video1_pat0;	/* 0x148 pll video1 pattern0 */
+	u32 pll_video1_pat1;	/* 0x14c pll video1 pattern1 */
+	u8 reserved_0x150[8];
+	u32 pll4_pat0;		/* 0x158 pll4 (ve) pattern0 */
+	u32 pll4_pat1;		/* 0x15c pll4 (ve) pattern1 */
+	u32 pll10_pat0;		/* 0x160 pll10 (de) pattern0 */
+	u32 pll10_pat1;		/* 0x164 pll10 (de) pattern1 */
+	u8 reserved_0x168[8];
+	u32 pll9_pat0;		/* 0x170 pll9 (hsic) pattern0 */
+	u32 pll9_pat1;		/* 0x174 pll9 (hsic) pattern1 */
+	u32 pll2_pat0;		/* 0x178 pll2 (audio) pattern0 */
+	u32 pll2_pat1;		/* 0x17c pll2 (audio) pattern1 */
+	u8 reserved_0x180[384];
+	u32 pll1_bias;		/* 0x300 pll1 (cpux) bias */
+	u8 reserved_0x304[12];
+	u32 pll5_bias;		/* 0x310 pll5 (ddr) bias */
+	u8 reserved_0x314[12];
+	u32 pll6_bias;		/* 0x320 pll6 (periph0) bias */
+	u8 reserved_0x324[4];
+	u32 pll_periph1_bias;	/* 0x328 pll periph1 bias */
+	u8 reserved_0x32c[4];
+	u32 pll7_bias;		/* 0x330 pll7 (gpu) bias */
+	u8 reserved_0x334[12];
+	u32 pll3_bias;		/* 0x340 pll3 (video0) bias */
+	u8 reserved_0x344[4];
+	u32 pll_video1_bias;	/* 0x348 pll video1 bias */
+	u8 reserved_0x34c[12];
+	u32 pll4_bias;		/* 0x358 pll4 (ve) bias */
+	u8 reserved_0x35c[4];
+	u32 pll10_bias;		/* 0x360 pll10 (de) bias */
+	u8 reserved_0x364[12];
+	u32 pll9_bias;		/* 0x370 pll9 (hsic) bias */
+	u8 reserved_0x374[4];
+	u32 pll2_bias;		/* 0x378 pll2 (audio) bias */
+	u8 reserved_0x37c[132];
+	u32 pll1_tun;		/* 0x400 pll1 (cpux) tunning */
+	u8 reserved_0x404[252];
+	u32 cpu_axi_cfg;	/* 0x500 CPUX/AXI clock control*/
+	u8 reserved_0x504[12];
+	u32 psi_ahb1_ahb2_cfg;	/* 0x510 PSI/AHB1/AHB2 clock control */
+	u8 reserved_0x514[8];
+	u32 ahb3_cfg;		/* 0x51c AHB3 clock control */
+	u32 apb1_cfg;		/* 0x520 APB1 clock control */
+	u32 apb2_cfg;		/* 0x524 APB2 clock control */
+	u8 reserved_0x528[24];
+	u32 mbus_cfg;		/* 0x540 MBUS clock control */
+	u8 reserved_0x544[188];
+	u32 de_clk_cfg;		/* 0x600 DE clock control */
+	u8 reserved_0x604[8];
+	u32 de_gate_reset;	/* 0x60c DE gate/reset control */
+	u8 reserved_0x610[16];
+	u32 di_clk_cfg;		/* 0x620 DI clock control */
+	u8 reserved_0x024[8];
+	u32 di_gate_reset;	/* 0x62c DI gate/reset control */
+	u8 reserved_0x630[64];
+	u32 gpu_clk_cfg;	/* 0x670 GPU clock control */
+	u8 reserved_0x674[8];
+	u32 gpu_gate_reset;	/* 0x67c GPU gate/reset control */
+	u32 ce_clk_cfg;		/* 0x680 CE clock control */
+	u8 reserved_0x684[8];
+	u32 ce_gate_reset;	/* 0x68c CE gate/reset control */
+	u32 ve_clk_cfg;		/* 0x690 VE clock control */
+	u8 reserved_0x694[8];
+	u32 ve_gate_reset;	/* 0x69c VE gate/reset control */
+	u8 reserved_0x6a0[16];
+	u32 emce_clk_cfg;	/* 0x6b0 EMCE clock control */
+	u8 reserved_0x6b4[8];
+	u32 emce_gate_reset;	/* 0x6bc EMCE gate/reset control */
+	u32 vp9_clk_cfg;	/* 0x6c0 VP9 clock control */
+	u8 reserved_0x6c4[8];
+	u32 vp9_gate_reset;	/* 0x6cc VP9 gate/reset control */
+	u8 reserved_0x6d0[60];
+	u32 dma_gate_reset;	/* 0x70c DMA gate/reset control */
+	u8 reserved_0x710[12];
+	u32 msgbox_gate_reset;	/* 0x71c Message Box gate/reset control */
+	u8 reserved_0x720[12];
+	u32 spinlock_gate_reset;/* 0x72c Spinlock gate/reset control */
+	u8 reserved_0x730[12];
+	u32 hstimer_gate_reset;	/* 0x73c HS Timer gate/reset control */
+	u32 avs_gate_reset;	/* 0x740 AVS gate/reset control */
+	u8 reserved_0x744[72];
+	u32 dbgsys_gate_reset;	/* 0x78c Debugging system gate/reset control */
+	u8 reserved_0x790[12];
+	u32 psi_gate_reset;	/* 0x79c PSI gate/reset control */
+	u8 reserved_0x7a0[12];
+	u32 pwm_gate_reset;	/* 0x7ac PWM gate/reset control */
+	u8 reserved_0x7b0[12];
+	u32 iommu_gate_reset;	/* 0x7bc IOMMU gate/reset control */
+	u8 reserved_0x7c0[64];
+	u32 dram_clk_cfg;		/* 0x800 DRAM clock control */
+	u32 mbus_gate;		/* 0x804 MBUS gate control */
+	u8 reserved_0x808[4];
+	u32 dram_gate_reset;	/* 0x80c DRAM gate/reset control */
+	u32 nand0_clk_cfg;	/* 0x810 NAND0 clock control */
+	u32 nand1_clk_cfg;	/* 0x814 NAND1 clock control */
+	u8 reserved_0x818[20];
+	u32 nand_gate_reset;	/* 0x82c NAND gate/reset control */
+	u32 sd0_clk_cfg;	/* 0x830 MMC0 clock control */
+	u32 sd1_clk_cfg;	/* 0x834 MMC1 clock control */
+	u32 sd2_clk_cfg;	/* 0x838 MMC2 clock control */
+	u8 reserved_0x83c[16];
+	u32 sd_gate_reset;	/* 0x84c MMC gate/reset control */
+	u8 reserved_0x850[188];
+	u32 uart_gate_reset;	/* 0x90c UART gate/reset control */
+	u8 reserved_0x910[12];
+	u32 twi_gate_reset;	/* 0x91c I2C gate/reset control */
+	u8 reserved_0x920[28];
+	u32 scr_gate_reset;	/* 0x93c SCR gate/reset control */
+	u32 spi0_clk_cfg;	/* 0x940 SPI0 clock control */
+	u32 spi1_clk_cfg;	/* 0x944 SPI1 clock control */
+	u8 reserved_0x948[36];
+	u32 spi_gate_reset;	/* 0x96c SPI gate/reset control */
+	u8 reserved_0x970[12];
+	u32 emac_gate_reset;	/* 0x97c EMAC gate/reset control */
+	u8 reserved_0x980[48];
+	u32 ts_clk_cfg;		/* 0x9b0 TS clock control */
+	u8 reserved_0x9b4[8];
+	u32 ts_gate_reset;	/* 0x9bc TS gate/reset control */
+	u32 irtx_clk_cfg;	/* 0x9c0 IR TX clock control */
+	u8 reserved_0x9c4[8];
+	u32 irtx_gate_reset;	/* 0x9cc IR TX gate/reset control */
+	u8 reserved_0x9d0[44];
+	u32 ths_gate_reset;	/* 0x9fc THS gate/reset control */
+	u8 reserved_0xa00[12];
+	u32 i2s3_clk_cfg;	/* 0xa0c I2S3 clock control */
+	u32 i2s0_clk_cfg;	/* 0xa10 I2S0 clock control */
+	u32 i2s1_clk_cfg;	/* 0xa14 I2S1 clock control */
+	u32 i2s2_clk_cfg;	/* 0xa18 I2S2 clock control */
+	u32 i2s_gate_reset;	/* 0xa1c I2S gate/reset control */
+	u32 spdif_clk_cfg;	/* 0xa20 SPDIF clock control */
+	u8 reserved_0xa24[8];
+	u32 spdif_gate_reset;	/* 0xa2c SPDIF gate/reset control */
+	u8 reserved_0xa30[16];
+	u32 dmic_clk_cfg;	/* 0xa40 DMIC clock control */
+	u8 reserved_0xa44[8];
+	u32 dmic_gate_reset;	/* 0xa4c DMIC gate/reset control */
+	u8 reserved_0xa50[16];
+	u32 ahub_clk_cfg;	/* 0xa60 Audio HUB clock control */
+	u8 reserved_0xa64[8];
+	u32 ahub_gate_reset;	/* 0xa6c Audio HUB gate/reset control */
+	u32 usb0_clk_cfg;	/* 0xa70 USB0(OTG) clock control */
+	u32 usb1_clk_cfg;	/* 0xa74 USB1(XHCI) clock control */
+	u8 reserved_0xa78[4];
+	u32 usb3_clk_cfg;	/* 0xa78 USB3 clock control */
+	u8 reserved_0xa80[12];
+	u32 usb_gate_reset;	/* 0xa8c USB gate/reset control */
+	u8 reserved_0xa90[32];
+	u32 pcie_ref_clk_cfg;	/* 0xab0 PCIE REF clock control */
+	u32 pcie_axi_clk_cfg;	/* 0xab4 PCIE AXI clock control */
+	u32 pcie_aux_clk_cfg;	/* 0xab8 PCIE AUX clock control */
+	u32 pcie_gate_reset;	/* 0xabc PCIE gate/reset control */
+	u8 reserved_0xac0[64];
+	u32 hdmi_clk_cfg;	/* 0xb00 HDMI clock control */
+	u32 hdmi_slow_clk_cfg;	/* 0xb04 HDMI slow clock control */
+	u8 reserved_0xb08[8];
+	u32 hdmi_cec_clk_cfg;	/* 0xb10 HDMI CEC clock control */
+	u8 reserved_0xb14[8];
+	u32 hdmi_gate_reset;	/* 0xb1c HDMI gate/reset control */
+	u8 reserved_0xb20[60];
+	u32 tcon_top_gate_reset;/* 0xb5c TCON TOP gate/reset control */
+	u32 tcon_lcd0_clk_cfg;	/* 0xb60 TCON LCD0 clock control */
+	u8 reserved_0xb64[24];
+	u32 tcon_lcd_gate_reset;/* 0xb7c TCON LCD gate/reset control */
+	u32 tcon_tv0_clk_cfg;	/* 0xb80 TCON TV0 clock control */
+	u8 reserved_0xb84[24];
+	u32 tcon_tv_gate_reset;	/* 0xb9c TCON TV gate/reset control */
+	u8 reserved_0xba0[96];
+	u32 csi_misc_clk_cfg;	/* 0xc00 CSI MISC clock control */
+	u32 csi_top_clk_cfg;	/* 0xc04 CSI TOP clock control */
+	u32 csi_mclk_cfg;	/* 0xc08 CSI Master clock control */
+	u8 reserved_0xc0c[32];
+	u32 csi_gate_reset;	/* 0xc2c CSI gate/reset control */
+	u8 reserved_0xc30[16];
+	u32 hdcp_clk_cfg;	/* 0xc40 HDCP clock control */
+	u8 reserved_0xc44[8];
+	u32 hdcp_gate_reset;	/* 0xc4c HDCP gate/reset control */
+	u8 reserved_0xc50[688];
+	u32 ccu_sec_switch;	/* 0xf00 CCU security switch */
+	u32 pll_lock_dbg_ctrl;	/* 0xf04 PLL lock debugging control */
+};
+
+/* pll1 bit field */
+#define CCM_PLL1_CTRL_EN		BIT(31)
+#define CCM_PLL1_LOCK_EN		BIT(29)
+#define CCM_PLL1_LOCK			BIT(28)
+#define CCM_PLL1_OUT_EN			BIT(27)
+#define CCM_PLL1_CLOCK_TIME_2		(2 << 24)
+#define CCM_PLL1_CTRL_P(p)		((p) << 16)
+#define CCM_PLL1_CTRL_N(n)		((n) << 8)
+
+/* pll5 bit field */
+#define CCM_PLL5_CTRL_EN		BIT(31)
+#define CCM_PLL5_LOCK_EN		BIT(29)
+#define CCM_PLL5_LOCK			BIT(28)
+#define CCM_PLL5_OUT_EN			BIT(27)
+#define CCM_PLL5_CTRL_N(n)		((n) << 8)
+#define CCM_PLL5_CTRL_DIV1(div1)	((div1) << 0)
+#define CCM_PLL5_CTRL_DIV2(div0)	((div0) << 1)
+
+/* pll6 bit field */
+#define CCM_PLL6_CTRL_EN		BIT(31)
+#define CCM_PLL6_LOCK_EN		BIT(29)
+#define CCM_PLL6_LOCK			BIT(28)
+#define CCM_PLL6_CTRL_N_SHIFT		8
+#define CCM_PLL6_CTRL_N_MASK		(0xff << CCM_PLL6_CTRL_N_SHIFT)
+#define CCM_PLL6_CTRL_DIV1_SHIFT	0
+#define CCM_PLL6_CTRL_DIV1_MASK		(0x1 << CCM_PLL6_CTRL_DIV1_SHIFT)
+#define CCM_PLL6_CTRL_DIV2_SHIFT	1
+#define CCM_PLL6_CTRL_DIV2_MASK		(0x1 << CCM_PLL6_CTRL_DIV2_SHIFT)
+
+/* cpu_axi bit field*/
+#define CCM_CPU_AXI_MUX_MASK		(0x3 << 24)
+#define CCM_CPU_AXI_MUX_OSC24M		(0x0 << 24)
+#define CCM_CPU_AXI_MUX_PLL_CPUX	(0x3 << 24)
+#define CCM_CPU_AXI_APB_MASK		0x300
+#define CCM_CPU_AXI_AXI_MASK		0x3
+#define CCM_CPU_AXI_DEFAULT_FACTORS	0x301
+
+#ifdef CONFIG_MACH_SUN50I_H6
+#define CCM_PLL6_DEFAULT		0xa0006300
+
+/* psi_ahb1_ahb2 bit field */
+#define CCM_PSI_AHB1_AHB2_DEFAULT	0x03000102
+
+/* ahb3 bit field */
+#define CCM_AHB3_DEFAULT		0x03000002
+
+/* apb1 bit field */
+#define CCM_APB1_DEFAULT		0x03000102
+#elif CONFIG_MACH_SUN50I_H616
+#define CCM_PLL6_DEFAULT		0xa8003100
+
+/* psi_ahb1_ahb2 bit field */
+#define CCM_PSI_AHB1_AHB2_DEFAULT	0x03000002
+
+/* ahb3 bit field */
+#define CCM_AHB3_DEFAULT		0x03000002
+
+/* apb1 bit field */
+#define CCM_APB1_DEFAULT		0x03000102
+#endif
+
+/* apb2 bit field */
+#define APB2_CLK_SRC_OSC24M		(0x0 << 24)
+#define APB2_CLK_SRC_OSC32K		(0x1 << 24)
+#define APB2_CLK_SRC_PSI		(0x2 << 24)
+#define APB2_CLK_SRC_PLL6		(0x3 << 24)
+#define APB2_CLK_SRC_MASK		(0x3 << 24)
+#define APB2_CLK_RATE_N_1		(0x0 << 8)
+#define APB2_CLK_RATE_N_2		(0x1 << 8)
+#define APB2_CLK_RATE_N_4		(0x2 << 8)
+#define APB2_CLK_RATE_N_8		(0x3 << 8)
+#define APB2_CLK_RATE_N_MASK		(3 << 8)
+#define APB2_CLK_RATE_M(m)		(((m)-1) << 0)
+#define APB2_CLK_RATE_M_MASK            (3 << 0)
+
+/* MBUS clock bit field */
+#define MBUS_ENABLE			BIT(31)
+#define MBUS_RESET			BIT(30)
+#define MBUS_CLK_SRC_MASK		GENMASK(25, 24)
+#define MBUS_CLK_SRC_OSCM24		(0 << 24)
+#define MBUS_CLK_SRC_PLL6X2		(1 << 24)
+#define MBUS_CLK_SRC_PLL5		(2 << 24)
+#define MBUS_CLK_SRC_PLL6X4		(3 << 24)
+#define MBUS_CLK_M(m)			(((m)-1) << 0)
+
+/* Module gate/reset shift*/
+#define RESET_SHIFT			(16)
+#define GATE_SHIFT			(0)
+
+/* DRAM clock bit field */
+#define DRAM_MOD_RESET			BIT(30)
+#define DRAM_CLK_UPDATE			BIT(27)
+#define DRAM_CLK_SRC_MASK		GENMASK(25, 24)
+#define DRAM_CLK_SRC_PLL5		(0 << 24)
+#define DRAM_CLK_M(m)			(((m)-1) << 0)
+
+/* MMC clock bit field */
+#define CCM_MMC_CTRL_M(x)		((x) - 1)
+#define CCM_MMC_CTRL_N(x)		((x) << 8)
+#define CCM_MMC_CTRL_OSCM24		(0x0 << 24)
+#define CCM_MMC_CTRL_PLL6X2		(0x1 << 24)
+#define CCM_MMC_CTRL_PLL_PERIPH2X2	(0x2 << 24)
+#define CCM_MMC_CTRL_ENABLE		(0x1 << 31)
+/* H6 doesn't have these delays */
+#define CCM_MMC_CTRL_OCLK_DLY(a)	((void) (a), 0)
+#define CCM_MMC_CTRL_SCLK_DLY(a)	((void) (a), 0)
+
+#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int hz);
+unsigned int clock_get_pll6(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_SUN50I_H6_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
new file mode 100644
index 000000000..ee387127f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -0,0 +1,533 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * sun6i clock register definitions
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#ifndef _SUNXI_CLOCK_SUN6I_H
+#define _SUNXI_CLOCK_SUN6I_H
+
+struct sunxi_ccm_reg {
+	u32 pll1_cfg;		/* 0x00 pll1 control */
+	u32 reserved0;
+	u32 pll2_cfg;		/* 0x08 pll2 control */
+	u32 reserved1;
+	u32 pll3_cfg;		/* 0x10 pll3 control */
+	u32 reserved2;
+	u32 pll4_cfg;		/* 0x18 pll4 control */
+	u32 reserved3;
+	u32 pll5_cfg;		/* 0x20 pll5 control */
+	u32 reserved4;
+	u32 pll6_cfg;		/* 0x28 pll6 control */
+	u32 reserved5;
+	u32 pll7_cfg;		/* 0x30 pll7 control */
+	u32 sata_pll_cfg;	/* 0x34 SATA pll control (R40 only) */
+	u32 pll8_cfg;		/* 0x38 pll8 control */
+	u32 reserved7;
+	u32 mipi_pll_cfg;	/* 0x40 MIPI pll control */
+	u32 pll9_cfg;		/* 0x44 pll9 control */
+	u32 pll10_cfg;		/* 0x48 pll10 control */
+	u32 pll11_cfg;		/* 0x4c pll11 (ddr1) control (A33 only) */
+	u32 cpu_axi_cfg;	/* 0x50 CPU/AXI divide ratio */
+	u32 ahb1_apb1_div;	/* 0x54 AHB1/APB1 divide ratio */
+	u32 apb2_div;		/* 0x58 APB2 divide ratio */
+	u32 axi_gate;		/* 0x5c axi module clock gating */
+	u32 ahb_gate0;		/* 0x60 ahb module clock gating 0 */
+	u32 ahb_gate1;		/* 0x64 ahb module clock gating 1 */
+	u32 apb1_gate;		/* 0x68 apb1 module clock gating */
+	u32 apb2_gate;		/* 0x6c apb2 module clock gating */
+	u32 bus_gate4;          /* 0x70 gate 4 module clock gating */
+	u8 res3[0xc];
+	u32 nand0_clk_cfg;	/* 0x80 nand0 clock control */
+	u32 nand1_clk_cfg;	/* 0x84 nand1 clock control */
+	u32 sd0_clk_cfg;	/* 0x88 sd0 clock control */
+	u32 sd1_clk_cfg;	/* 0x8c sd1 clock control */
+	u32 sd2_clk_cfg;	/* 0x90 sd2 clock control */
+	u32 sd3_clk_cfg;	/* 0x94 sd3 clock control */
+	u32 ts_clk_cfg;		/* 0x98 transport stream clock control */
+	u32 ss_clk_cfg;		/* 0x9c security system clock control */
+	u32 spi0_clk_cfg;	/* 0xa0 spi0 clock control */
+	u32 spi1_clk_cfg;	/* 0xa4 spi1 clock control */
+	u32 spi2_clk_cfg;	/* 0xa8 spi2 clock control */
+	u32 spi3_clk_cfg;	/* 0xac spi3 clock control */
+	u32 i2s0_clk_cfg;	/* 0xb0 I2S0 clock control*/
+	u32 i2s1_clk_cfg;	/* 0xb4 I2S1 clock control */
+	u32 reserved10[2];
+	u32 spdif_clk_cfg;	/* 0xc0 SPDIF clock control */
+	u32 reserved11;
+	u32 sata_clk_cfg;	/* 0xc8 SATA clock control (R40 only) */
+	u32 usb_clk_cfg;	/* 0xcc USB clock control */
+#ifdef CONFIG_MACH_SUN8I_R40
+	u32 cir0_clk_cfg;	/* 0xd0 CIR0 clock control (R40 only) */
+#else
+	u32 gmac_clk_cfg;	/* 0xd0 GMAC clock control (not for R40) */
+#endif
+	u32 reserved12[7];
+	u32 mdfs_clk_cfg;	/* 0xf0 MDFS clock control */
+	u32 dram_clk_cfg;	/* 0xf4 DRAM configuration clock control */
+	u32 dram_pll_cfg;	/* 0xf8 PLL_DDR cfg register, A33 only */
+	u32 mbus_reset;		/* 0xfc MBUS reset control, A33 only */
+	u32 dram_clk_gate;	/* 0x100 DRAM module gating */
+#ifdef CONFIG_SUNXI_DE2
+	u32 de_clk_cfg;		/* 0x104 DE module clock */
+#else
+	u32 be0_clk_cfg;	/* 0x104 BE0 module clock */
+#endif
+	u32 be1_clk_cfg;	/* 0x108 BE1 module clock */
+	u32 fe0_clk_cfg;	/* 0x10c FE0 module clock */
+	u32 fe1_clk_cfg;	/* 0x110 FE1 module clock */
+	u32 mp_clk_cfg;		/* 0x114 MP module clock */
+#ifdef CONFIG_SUNXI_DE2
+	u32 lcd0_clk_cfg;	/* 0x118 LCD0 module clock */
+	u32 lcd1_clk_cfg;	/* 0x11c LCD1 module clock */
+#else
+	u32 lcd0_ch0_clk_cfg;	/* 0x118 LCD0 CH0 module clock */
+	u32 lcd1_ch0_clk_cfg;	/* 0x11c LCD1 CH0 module clock */
+#endif
+	u32 tve_clk_cfg;	/* 0x120 H3/H5 TVE module clock */
+	u32 reserved14[2];
+	u32 lcd0_ch1_clk_cfg;	/* 0x12c LCD0 CH1 module clock */
+	u32 lcd1_ch1_clk_cfg;	/* 0x130 LCD1 CH1 module clock */
+	u32 csi0_clk_cfg;	/* 0x134 CSI0 module clock */
+	u32 csi1_clk_cfg;	/* 0x138 CSI1 module clock */
+	u32 ve_clk_cfg;		/* 0x13c VE module clock */
+	u32 adda_clk_cfg;	/* 0x140 ADDA module clock */
+	u32 avs_clk_cfg;	/* 0x144 AVS module clock */
+	u32 dmic_clk_cfg;	/* 0x148 Digital Mic module clock*/
+	u32 reserved15;
+	u32 hdmi_clk_cfg;	/* 0x150 HDMI module clock */
+#ifdef CONFIG_SUNXI_DE2
+	u32 hdmi_slow_clk_cfg;	/* 0x154 HDMI slow module clock */
+#else
+	u32 ps_clk_cfg;		/* 0x154 PS module clock */
+#endif
+	u32 mtc_clk_cfg;	/* 0x158 MTC module clock */
+	u32 mbus0_clk_cfg;	/* 0x15c MBUS0 module clock */
+	u32 mbus1_clk_cfg;	/* 0x160 MBUS1 module clock */
+#ifdef CONFIG_MACH_SUN8I_R40
+	u32 gmac_clk_cfg;	/* 0x164 GMAC clock control (R40 only) */
+#else
+	u32 reserved16;
+#endif
+	u32 mipi_dsi_clk_cfg;	/* 0x168 MIPI DSI clock control */
+	u32 mipi_csi_clk_cfg;	/* 0x16c MIPI CSI clock control */
+	u32 reserved17[4];
+	u32 iep_drc0_clk_cfg;	/* 0x180 IEP DRC0 module clock */
+	u32 iep_drc1_clk_cfg;	/* 0x184 IEP DRC1 module clock */
+	u32 iep_deu0_clk_cfg;	/* 0x188 IEP DEU0 module clock */
+	u32 iep_deu1_clk_cfg;	/* 0x18c IEP DEU1 module clock */
+	u32 reserved18[4];
+	u32 gpu_core_clk_cfg;	/* 0x1a0 GPU core clock config */
+	u32 gpu_mem_clk_cfg;	/* 0x1a4 GPU memory clock config */
+	u32 gpu_hyd_clk_cfg;	/* 0x1a0 GPU HYD clock config */
+	u32 reserved19[21];
+	u32 pll_lock;		/* 0x200 PLL Lock Time */
+	u32 pll1_lock;		/* 0x204 PLL1 Lock Time */
+	u32 reserved20[6];
+	u32 pll1_bias_cfg;	/* 0x220 PLL1 Bias config */
+	u32 pll2_bias_cfg;	/* 0x224 PLL2 Bias config */
+	u32 pll3_bias_cfg;	/* 0x228 PLL3 Bias config */
+	u32 pll4_bias_cfg;	/* 0x22c PLL4 Bias config */
+	u32 pll5_bias_cfg;	/* 0x230 PLL5 Bias config */
+	u32 pll6_bias_cfg;	/* 0x234 PLL6 Bias config */
+	u32 pll7_bias_cfg;	/* 0x238 PLL7 Bias config */
+	u32 pll8_bias_cfg;	/* 0x23c PLL8 Bias config */
+	u32 mipi_bias_cfg;	/* 0x240 MIPI Bias config */
+	u32 pll9_bias_cfg;	/* 0x244 PLL9 Bias config */
+	u32 pll10_bias_cfg;	/* 0x248 PLL10 Bias config */
+	u32 reserved21[5];
+	u32 pll5_tuning_cfg;	/* 0x260 PLL5 Tuning config */
+	u32 reserved21_5[7];
+	u32 pll1_pattern_cfg;	/* 0x280 PLL1 Pattern config */
+	u32 pll2_pattern_cfg;	/* 0x284 PLL2 Pattern config */
+	u32 pll3_pattern_cfg;	/* 0x288 PLL3 Pattern config */
+	u32 pll4_pattern_cfg;	/* 0x28c PLL4 Pattern config */
+	u32 pll5_pattern_cfg;	/* 0x290 PLL5 Pattern config */
+	u32 pll6_pattern_cfg;	/* 0x294 PLL6 Pattern config */
+	u32 pll7_pattern_cfg;	/* 0x298 PLL7 Pattern config */
+	u32 pll8_pattern_cfg;	/* 0x29c PLL8 Pattern config */
+	u32 mipi_pattern_cfg;	/* 0x2a0 MIPI Pattern config */
+	u32 pll9_pattern_cfg;	/* 0x2a4 PLL9 Pattern config */
+	u32 pll10_pattern_cfg;	/* 0x2a8 PLL10 Pattern config */
+	u32 pll11_pattern_cfg0; /* 0x2ac PLL11 Pattern config0, A33 only */
+	u32 pll11_pattern_cfg1; /* 0x2b0 PLL11 Pattern config0, A33 only */
+	u32 reserved22[3];
+	u32 ahb_reset0_cfg;	/* 0x2c0 AHB1 Reset 0 config */
+	u32 ahb_reset1_cfg;	/* 0x2c4 AHB1 Reset 1 config */
+	u32 ahb_reset2_cfg;	/* 0x2c8 AHB1 Reset 2 config */
+	u32 reserved23;
+	u32 apb1_reset_cfg;	/* 0x2d0 APB1 Reset config */
+	u32 reserved24;
+	u32 apb2_reset_cfg;	/* 0x2d8 APB2 Reset config */
+	u32 reserved25[5];
+	u32 ccu_sec_switch;	/* 0x2f0 CCU Security Switch, H3 only */
+	u32 reserved26[11];
+	u32 pll_lock_ctrl;	/* 0x320 PLL lock control, R40 only */
+};
+
+/* apb2 bit field */
+#define APB2_CLK_SRC_LOSC		(0x0 << 24)
+#define APB2_CLK_SRC_OSC24M		(0x1 << 24)
+#define APB2_CLK_SRC_PLL6		(0x2 << 24)
+#define APB2_CLK_SRC_MASK		(0x3 << 24)
+#define APB2_CLK_RATE_N_1		(0x0 << 16)
+#define APB2_CLK_RATE_N_2		(0x1 << 16)
+#define APB2_CLK_RATE_N_4		(0x2 << 16)
+#define APB2_CLK_RATE_N_8		(0x3 << 16)
+#define APB2_CLK_RATE_N_MASK		(3 << 16)
+#define APB2_CLK_RATE_M(m)		(((m)-1) << 0)
+#define APB2_CLK_RATE_M_MASK            (0x1f << 0)
+
+/* apb2 gate field */
+#define APB2_GATE_UART_SHIFT	(16)
+#define APB2_GATE_UART_MASK		(0xff << APB2_GATE_UART_SHIFT)
+#define APB2_GATE_TWI_SHIFT	(0)
+#define APB2_GATE_TWI_MASK		(0xf << APB2_GATE_TWI_SHIFT)
+
+/* cpu_axi_cfg bits */
+#define AXI_DIV_SHIFT			0
+#define ATB_DIV_SHIFT			8
+#define CPU_CLK_SRC_SHIFT		16
+
+#define AXI_DIV_1			0
+#define AXI_DIV_2			1
+#define AXI_DIV_3			2
+#define AXI_DIV_4			3
+#define ATB_DIV_1			0
+#define ATB_DIV_2			1
+#define ATB_DIV_4			2
+#define AHB_DIV_1			0
+#define CPU_CLK_SRC_OSC24M		1
+#define CPU_CLK_SRC_PLL1		2
+
+#define CCM_PLL1_CTRL_M(n)		((((n) - 1) & 0x3) << 0)
+#define CCM_PLL1_CTRL_K(n)		((((n) - 1) & 0x3) << 4)
+#define CCM_PLL1_CTRL_N(n)		((((n) - 1) & 0x1f) << 8)
+#define CCM_PLL1_CTRL_P(n)		(((n) & 0x3) << 16)
+#define CCM_PLL1_CTRL_EN		(0x1 << 31)
+
+#define CCM_PLL3_CTRL_M_SHIFT		0
+#define CCM_PLL3_CTRL_M_MASK		(0xf << CCM_PLL3_CTRL_M_SHIFT)
+#define CCM_PLL3_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_PLL3_CTRL_N_SHIFT		8
+#define CCM_PLL3_CTRL_N_MASK		(0x7f << CCM_PLL3_CTRL_N_SHIFT)
+#define CCM_PLL3_CTRL_N(n)		((((n) - 1) & 0x7f) << 8)
+#define CCM_PLL3_CTRL_INTEGER_MODE	(0x1 << 24)
+#define CCM_PLL3_CTRL_LOCK		(0x1 << 28)
+#define CCM_PLL3_CTRL_EN		(0x1 << 31)
+
+#define CCM_PLL5_CTRL_M(n)		((((n) - 1) & 0x3) << 0)
+#define CCM_PLL5_CTRL_K(n)		((((n) - 1) & 0x3) << 4)
+#define CCM_PLL5_CTRL_N(n)		((((n) - 1) & 0x1f) << 8)
+#define CCM_PLL5_CTRL_UPD		(0x1 << 20)
+#define CCM_PLL5_CTRL_SIGMA_DELTA_EN	(0x1 << 24)
+#define CCM_PLL5_CTRL_EN		(0x1 << 31)
+
+#define PLL6_CFG_DEFAULT		0x90041811 /* 600 MHz */
+
+#define CCM_PLL6_CTRL_N_SHIFT		8
+#define CCM_PLL6_CTRL_N_MASK		(0x1f << CCM_PLL6_CTRL_N_SHIFT)
+#define CCM_PLL6_CTRL_K_SHIFT		4
+#define CCM_PLL6_CTRL_K_MASK		(0x3 << CCM_PLL6_CTRL_K_SHIFT)
+#define CCM_PLL6_CTRL_LOCK		(1 << 28)
+
+#define CCM_SATA_PLL_DEFAULT		0x90005811 /* 100 MHz */
+
+#define CCM_MIPI_PLL_CTRL_M_SHIFT	0
+#define CCM_MIPI_PLL_CTRL_M_MASK	(0xf << CCM_MIPI_PLL_CTRL_M_SHIFT)
+#define CCM_MIPI_PLL_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_MIPI_PLL_CTRL_K_SHIFT	4
+#define CCM_MIPI_PLL_CTRL_K_MASK	(0x3 << CCM_MIPI_PLL_CTRL_K_SHIFT)
+#define CCM_MIPI_PLL_CTRL_K(n)		((((n) - 1) & 0x3) << 4)
+#define CCM_MIPI_PLL_CTRL_N_SHIFT	8
+#define CCM_MIPI_PLL_CTRL_N_MASK	(0xf << CCM_MIPI_PLL_CTRL_N_SHIFT)
+#define CCM_MIPI_PLL_CTRL_N(n)		((((n) - 1) & 0xf) << 8)
+#define CCM_MIPI_PLL_CTRL_LDO_EN	(0x3 << 22)
+#define CCM_MIPI_PLL_CTRL_EN		(0x1 << 31)
+
+#define CCM_PLL10_CTRL_M_SHIFT		0
+#define CCM_PLL10_CTRL_M_MASK		(0xf << CCM_PLL10_CTRL_M_SHIFT)
+#define CCM_PLL10_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_PLL10_CTRL_N_SHIFT		8
+#define CCM_PLL10_CTRL_N_MASK		(0x7f << CCM_PLL10_CTRL_N_SHIFT)
+#define CCM_PLL10_CTRL_N(n)		((((n) - 1) & 0x7f) << 8)
+#define CCM_PLL10_CTRL_INTEGER_MODE	(0x1 << 24)
+#define CCM_PLL10_CTRL_LOCK		(0x1 << 28)
+#define CCM_PLL10_CTRL_EN		(0x1 << 31)
+
+#define CCM_PLL11_CTRL_N(n)		((((n) - 1) & 0x3f) << 8)
+#define CCM_PLL11_CTRL_SIGMA_DELTA_EN	(0x1 << 24)
+#define CCM_PLL11_CTRL_UPD		(0x1 << 30)
+#define CCM_PLL11_CTRL_EN		(0x1 << 31)
+
+#define CCM_PLL5_TUN_LOCK_TIME(x)	(((x) & 0x7) << 24)
+#define CCM_PLL5_TUN_LOCK_TIME_MASK	CCM_PLL5_TUN_LOCK_TIME(0x7)
+#define CCM_PLL5_TUN_INIT_FREQ(x)	(((x) & 0x7f) << 16)
+#define CCM_PLL5_TUN_INIT_FREQ_MASK	CCM_PLL5_TUN_INIT_FREQ(0x7f)
+
+#if defined(CONFIG_MACH_SUN50I)
+/* AHB1=100MHz failsafe setup from the FEL mode, usable with PMIC defaults */
+#define AHB1_ABP1_DIV_DEFAULT		0x00003190 /* AHB1=PLL6/6,APB1=AHB1/2 */
+#else
+#define AHB1_ABP1_DIV_DEFAULT		0x00003180 /* AHB1=PLL6/3,APB1=AHB1/2 */
+#endif
+
+#define AXI_GATE_OFFSET_DRAM		0
+
+/* ahb_gate0 offsets */
+#ifdef CONFIG_MACH_SUNXI_H3_H5
+/*
+ * These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
+ * them 0 - 2 like they were called on older SoCs.
+ */
+#define AHB_GATE_OFFSET_USB_OHCI3	31
+#define AHB_GATE_OFFSET_USB_OHCI2	30
+#define AHB_GATE_OFFSET_USB_OHCI1	29
+#define AHB_GATE_OFFSET_USB_OHCI0	28
+#define AHB_GATE_OFFSET_USB_EHCI3	27
+#define AHB_GATE_OFFSET_USB_EHCI2	26
+#define AHB_GATE_OFFSET_USB_EHCI1	25
+#define AHB_GATE_OFFSET_USB_EHCI0	24
+#elif defined(CONFIG_MACH_SUN50I)
+#define AHB_GATE_OFFSET_USB_OHCI0	28
+#define AHB_GATE_OFFSET_USB_OHCI1	29
+#define AHB_GATE_OFFSET_USB_EHCI0	24
+#define AHB_GATE_OFFSET_USB_EHCI1	25
+#else
+#define AHB_GATE_OFFSET_USB_OHCI1	30
+#define AHB_GATE_OFFSET_USB_OHCI0	29
+#define AHB_GATE_OFFSET_USB_EHCI1	27
+#define AHB_GATE_OFFSET_USB_EHCI0	26
+#endif
+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUNXI_H3_H5)
+#define AHB_GATE_OFFSET_USB0		23
+#elif !defined(CONFIG_MACH_SUN8I_R40)
+#define AHB_GATE_OFFSET_USB0		24
+#else
+#define AHB_GATE_OFFSET_USB0		25
+#define AHB_GATE_OFFSET_SATA		24
+#endif
+#define AHB_GATE_OFFSET_MCTL		14
+#define AHB_GATE_OFFSET_GMAC		17
+#define AHB_GATE_OFFSET_NAND0		13
+#define AHB_GATE_OFFSET_NAND1		12
+#define AHB_GATE_OFFSET_MMC3		11
+#define AHB_GATE_OFFSET_MMC2		10
+#define AHB_GATE_OFFSET_MMC1		9
+#define AHB_GATE_OFFSET_MMC0		8
+#define AHB_GATE_OFFSET_MMC(n)		(AHB_GATE_OFFSET_MMC0 + (n))
+#define AHB_GATE_OFFSET_DMA		6
+#define AHB_GATE_OFFSET_SS		5
+
+/* ahb_gate1 offsets */
+#define AHB_GATE_OFFSET_DRC0		25
+#define AHB_GATE_OFFSET_DE_FE0		14
+#define AHB_GATE_OFFSET_DE_BE0		12
+#define AHB_GATE_OFFSET_DE		12
+#define AHB_GATE_OFFSET_HDMI		11
+#define AHB_GATE_OFFSET_TVE		9
+#ifndef CONFIG_SUNXI_DE2
+#define AHB_GATE_OFFSET_LCD1		5
+#define AHB_GATE_OFFSET_LCD0		4
+#else
+#define AHB_GATE_OFFSET_LCD1		4
+#define AHB_GATE_OFFSET_LCD0		3
+#endif
+
+#define CCM_NAND_CTRL_M(x)		((x) - 1)
+#define CCM_NAND_CTRL_N(x)		((x) << 16)
+#define CCM_NAND_CTRL_PLL6		(0x1 << 24)
+#define CCM_NAND_CTRL_ENABLE		(0x1 << 31)
+
+#define CCM_MMC_CTRL_M(x)		((x) - 1)
+#define CCM_MMC_CTRL_OCLK_DLY(x)	((x) << 8)
+#define CCM_MMC_CTRL_N(x)		((x) << 16)
+#define CCM_MMC_CTRL_SCLK_DLY(x)	((x) << 20)
+#define CCM_MMC_CTRL_OSCM24		(0x0 << 24)
+#define CCM_MMC_CTRL_PLL6		(0x1 << 24)
+#define CCM_MMC_CTRL_ENABLE		(0x1 << 31)
+
+#define CCM_SATA_CTRL_ENABLE		(0x1 << 31)
+#define CCM_SATA_CTRL_USE_EXTCLK	(0x1 << 24)
+
+#define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
+#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
+#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+#define CCM_USB_CTRL_PHY3_RST (0x1 << 3)
+/* There is no global phy clk gate on sun6i, define as 0 */
+#define CCM_USB_CTRL_PHYGATE 0
+#define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
+#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
+#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+#define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
+#ifdef CONFIG_MACH_SUNXI_H3_H5
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
+#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
+#define CCM_USB_CTRL_OHCI2_CLK (0x1 << 18)
+#define CCM_USB_CTRL_OHCI3_CLK (0x1 << 19)
+#else
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
+#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
+#endif
+
+#define CCM_GMAC_CTRL_TX_CLK_SRC_MII	0x0
+#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
+#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
+#define CCM_GMAC_CTRL_GPIT_MII		(0x0 << 2)
+#define CCM_GMAC_CTRL_GPIT_RGMII	(0x1 << 2)
+#define CCM_GMAC_CTRL_RX_CLK_DELAY(x)	((x) << 5)
+#define CCM_GMAC_CTRL_TX_CLK_DELAY(x)	((x) << 10)
+
+#define MDFS_CLK_DEFAULT		0x81000002 /* PLL6 / 3 */
+
+#define CCM_DRAMCLK_CFG_DIV(x)		((x - 1) << 0)
+#define CCM_DRAMCLK_CFG_DIV_MASK	(0xf << 0)
+#define CCM_DRAMCLK_CFG_DIV0(x)		((x - 1) << 8)
+#define CCM_DRAMCLK_CFG_DIV0_MASK	(0xf << 8)
+#define CCM_DRAMCLK_CFG_SRC_PLL5	(0x0 << 20)
+#define CCM_DRAMCLK_CFG_SRC_PLL6x2	(0x1 << 20)
+#define CCM_DRAMCLK_CFG_SRC_PLL11	(0x1 << 20) /* A64 only */
+#define CCM_DRAMCLK_CFG_SRC_MASK	(0x3 << 20)
+#define CCM_DRAMCLK_CFG_UPD		(0x1 << 16)
+#define CCM_DRAMCLK_CFG_RST		(0x1 << 31)
+
+#define CCM_DRAMPLL_CFG_SRC_PLL5	(0x0 << 16) /* Select PLL5 (DDR0) */
+#define CCM_DRAMPLL_CFG_SRC_PLL11	(0x1 << 16) /* Select PLL11 (DDR1) */
+#define CCM_DRAMPLL_CFG_SRC_MASK	(0x1 << 16)
+
+#define CCM_MBUS_RESET_RESET		(0x1 << 31)
+
+#define CCM_DRAM_GATE_OFFSET_DE_FE0	24
+#define CCM_DRAM_GATE_OFFSET_DE_FE1	25
+#define CCM_DRAM_GATE_OFFSET_DE_BE0	26
+#define CCM_DRAM_GATE_OFFSET_DE_BE1	27
+
+#define CCM_LCD_CH0_CTRL_PLL3		(0 << 24)
+#define CCM_LCD_CH0_CTRL_PLL7		(1 << 24)
+#define CCM_LCD_CH0_CTRL_PLL3_2X	(2 << 24)
+#define CCM_LCD_CH0_CTRL_PLL7_2X	(3 << 24)
+#define CCM_LCD_CH0_CTRL_MIPI_PLL	(4 << 24)
+/* No reset bit in ch0_clk_cfg (reset is controlled through ahb_reset1) */
+#define CCM_LCD_CH0_CTRL_RST		0
+#define CCM_LCD_CH0_CTRL_GATE		(0x1 << 31)
+
+#define CCM_LCD_CH1_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_LCD_CH1_CTRL_HALF_SCLK1	0 /* no seperate sclk1 & 2 on sun6i */
+#define CCM_LCD_CH1_CTRL_PLL3		(0 << 24)
+#define CCM_LCD_CH1_CTRL_PLL7		(1 << 24)
+#define CCM_LCD_CH1_CTRL_PLL3_2X	(2 << 24)
+#define CCM_LCD_CH1_CTRL_PLL7_2X	(3 << 24)
+#define CCM_LCD_CH1_CTRL_GATE		(0x1 << 31)
+
+#define CCM_LCD0_CTRL_GATE		(0x1 << 31)
+#define CCM_LCD0_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+
+#define CCM_LCD1_CTRL_GATE		(0x1 << 31)
+#define CCM_LCD1_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+
+#define CCM_HDMI_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_HDMI_CTRL_PLL_MASK		(3 << 24)
+#define CCM_HDMI_CTRL_PLL3		(0 << 24)
+#define CCM_HDMI_CTRL_PLL7		(1 << 24)
+#define CCM_HDMI_CTRL_PLL3_2X		(2 << 24)
+#define CCM_HDMI_CTRL_PLL7_2X		(3 << 24)
+#define CCM_HDMI_CTRL_DDC_GATE		(0x1 << 30)
+#define CCM_HDMI_CTRL_GATE		(0x1 << 31)
+
+#define CCM_HDMI_SLOW_CTRL_DDC_GATE	(1 << 31)
+
+#define CCM_TVE_CTRL_GATE		(0x1 << 31)
+#define CCM_TVE_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+
+#if defined(CONFIG_MACH_SUN50I)
+#define MBUS_CLK_DEFAULT		0x81000002 /* PLL6x2 / 3 */
+#elif defined(CONFIG_MACH_SUN8I)
+#define MBUS_CLK_DEFAULT		0x81000003 /* PLL6 / 4 */
+#else
+#define MBUS_CLK_DEFAULT		0x81000001 /* PLL6 / 2 */
+#endif
+#define MBUS_CLK_GATE			(0x1 << 31)
+
+#define CCM_PLL5_PATTERN		0xd1303333
+#define CCM_PLL11_PATTERN		0xf5860000
+
+/* ahb_reset0 offsets */
+#ifdef CONFIG_MACH_SUN8I_R40
+#define AHB_RESET_OFFSET_SATA		24
+#endif
+#define AHB_RESET_OFFSET_GMAC		17
+#define AHB_RESET_OFFSET_MCTL		14
+#define AHB_RESET_OFFSET_MMC3		11
+#define AHB_RESET_OFFSET_MMC2		10
+#define AHB_RESET_OFFSET_MMC1		9
+#define AHB_RESET_OFFSET_MMC0		8
+#define AHB_RESET_OFFSET_MMC(n)		(AHB_RESET_OFFSET_MMC0 + (n))
+#define AHB_RESET_OFFSET_SS		5
+
+/* ahb_reset1 offsets */
+#define AHB_RESET_OFFSET_SAT		26
+#define AHB_RESET_OFFSET_DRC0		25
+#define AHB_RESET_OFFSET_DE_FE0		14
+#define AHB_RESET_OFFSET_DE_BE0		12
+#define AHB_RESET_OFFSET_DE		12
+#define AHB_RESET_OFFSET_HDMI		11
+#define AHB_RESET_OFFSET_HDMI2		10
+#define AHB_RESET_OFFSET_TVE		9
+#ifndef CONFIG_SUNXI_DE2
+#define AHB_RESET_OFFSET_LCD1		5
+#define AHB_RESET_OFFSET_LCD0		4
+#else
+#define AHB_RESET_OFFSET_LCD1		4
+#define AHB_RESET_OFFSET_LCD0		3
+#endif
+
+/* ahb_reset2 offsets */
+#define AHB_RESET_OFFSET_EPHY		2
+#define AHB_RESET_OFFSET_LVDS		0
+
+/* apb2 reset */
+#define APB2_RESET_UART_SHIFT		(16)
+#define APB2_RESET_UART_MASK		(0xff << APB2_RESET_UART_SHIFT)
+#define APB2_RESET_TWI_SHIFT		(0)
+#define APB2_RESET_TWI_MASK		(0xf << APB2_RESET_TWI_SHIFT)
+
+/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */
+#define CCM_DE_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_DE_CTRL_PLL_MASK		(0xf << 24)
+#define CCM_DE_CTRL_PLL3		(0 << 24)
+#define CCM_DE_CTRL_PLL7		(1 << 24)
+#define CCM_DE_CTRL_PLL6_2X		(2 << 24)
+#define CCM_DE_CTRL_PLL8		(3 << 24)
+#define CCM_DE_CTRL_PLL9		(4 << 24)
+#define CCM_DE_CTRL_PLL10		(5 << 24)
+#define CCM_DE_CTRL_GATE		(1 << 31)
+
+/* CCM bits common to all Display Engine 2.0 clock ctrl regs */
+#define CCM_DE2_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_DE2_CTRL_PLL_MASK		(3 << 24)
+#define CCM_DE2_CTRL_PLL6_2X		(0 << 24)
+#define CCM_DE2_CTRL_PLL10		(1 << 24)
+#define CCM_DE2_CTRL_GATE		(0x1 << 31)
+
+/* CCU security switch, H3 only */
+#define CCM_SEC_SWITCH_MBUS_NONSEC	(1 << 2)
+#define CCM_SEC_SWITCH_BUS_NONSEC	(1 << 1)
+#define CCM_SEC_SWITCH_PLL_NONSEC	(1 << 0)
+
+#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int hz);
+void clock_set_pll3(unsigned int hz);
+void clock_set_pll3_factors(int m, int n);
+void clock_set_pll5(unsigned int clk, bool sigma_delta_enable);
+void clock_set_pll10(unsigned int hz);
+void clock_set_pll11(unsigned int clk, bool sigma_delta_enable);
+void clock_set_mipi_pll(unsigned int hz);
+unsigned int clock_get_pll3(void);
+unsigned int clock_get_pll6(void);
+unsigned int clock_get_mipi_pll(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_SUN6I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h
new file mode 100644
index 000000000..14df3cc8f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h
@@ -0,0 +1,305 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * sun8i a83t clock register definitions
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * from sun6i.h
+ */
+
+#ifndef _SUNXI_CLOCK_SUN8I_A83T_H
+#define _SUNXI_CLOCK_SUN8I_A83T_H
+
+struct sunxi_ccm_reg {
+	u32 pll1_c0_cfg;	/* 0x00 c1cpu# pll control */
+	u32 pll1_c1_cfg;	/* 0x04 c1cpu# pll control */
+	u32 pll2_cfg;		/* 0x08 pll2 audio control */
+	u32 reserved1;
+	u32 pll3_cfg;		/* 0x10 pll3 video0 control */
+	u32 reserved2;
+	u32 pll4_cfg;		/* 0x18 pll4 ve control */
+	u32 reserved3;
+	u32 pll5_cfg;		/* 0x20 pll5 ddr control */
+	u32 reserved4;
+	u32 pll6_cfg;		/* 0x28 pll6 peripheral control */
+	u32 reserved5[3];	/* 0x2c */
+	u32 pll7_cfg;		/* 0x38 pll7 gpu control */
+	u32 reserved6[2];	/* 0x3c */
+	u32 pll8_cfg;		/* 0x44 pll8 hsic control */
+	u32 pll9_cfg;		/* 0x48 pll9 de control */
+	u32 pll10_cfg;		/* 0x4c pll10 video1 control */
+	u32 cpu_axi_cfg;	/* 0x50 CPU/AXI divide ratio */
+	u32 ahb1_apb1_div;	/* 0x54 AHB1/APB1 divide ratio */
+	u32 apb2_div;		/* 0x58 APB2 divide ratio */
+	u32 ahb2_div;		/* 0x5c AHB2 divide ratio */
+	u32 ahb_gate0;		/* 0x60 ahb module clock gating 0 */
+	u32 ahb_gate1;		/* 0x64 ahb module clock gating 1 */
+	u32 apb1_gate;		/* 0x68 apb1 module clock gating 3 */
+	u32 apb2_gate;		/* 0x6c apb2 module clock gating 4 */
+	u32 reserved7[2];	/* 0x70 */
+	u32 cci400_cfg;		/* 0x78 cci400 clock configuration A83T only */
+	u32 reserved8;		/* 0x7c */
+	u32 nand0_clk_cfg;	/* 0x80 nand clock control */
+	u32 reserved9;		/* 0x84 */
+	u32 sd0_clk_cfg;	/* 0x88 sd0 clock control */
+	u32 sd1_clk_cfg;	/* 0x8c sd1 clock control */
+	u32 sd2_clk_cfg;	/* 0x90 sd2 clock control */
+	u32 sd3_clk_cfg;	/* 0x94 sd3 clock control */
+	u32 reserved10;		/* 0x98 */
+	u32 ss_clk_cfg;		/* 0x9c security system clock control */
+	u32 spi0_clk_cfg;	/* 0xa0 spi0 clock control */
+	u32 spi1_clk_cfg;	/* 0xa4 spi1 clock control */
+	u32 reserved11[2];	/* 0xa8 */
+	u32 i2s0_clk_cfg;	/* 0xb0 I2S0 clock control */
+	u32 i2s1_clk_cfg;	/* 0xb4 I2S1 clock control */
+	u32 i2s2_clk_cfg;	/* 0xb8 I2S2 clock control */
+	u32 tdm_clk_cfg;	/* 0xbc TDM clock control */
+	u32 spdif_clk_cfg;      /* 0xc0 SPDIF clock control */
+	u32 reserved12[2];	/* 0xc4 */
+	u32 usb_clk_cfg;	/* 0xcc USB clock control */
+	u32 reserved13[9];	/* 0xd0 */
+	u32 dram_clk_cfg;	/* 0xf4 DRAM configuration clock control */
+	u32 dram_pll_cfg;	/* 0xf8 PLL_DDR cfg register */
+	u32 mbus_reset;		/* 0xfc MBUS reset control */
+	u32 dram_clk_gate;	/* 0x100 DRAM module gating */
+	u32 reserved14[5];	/* 0x104 BE0 */
+	u32 lcd0_clk_cfg;	/* 0x118 LCD0 module clock */
+	u32 lcd1_clk_cfg;	/* 0x11c LCD1 module clock */
+	u32 reserved15[4];	/* 0x120 */
+	u32 mipi_csi_clk_cfg;	/* 0x130 MIPI CSI module clock */
+	u32 csi_clk_cfg;	/* 0x134 CSI module clock */
+	u32 reserved16;		/* 0x138 */
+	u32 ve_clk_cfg;		/* 0x13c VE module clock */
+	u32 reserved17;		/* 0x140 */
+	u32 avs_clk_cfg;	/* 0x144 AVS module clock */
+	u32 reserved18[2];	/* 0x148 */
+	u32 hdmi_clk_cfg;	/* 0x150 HDMI module clock */
+	u32 hdmi_slow_clk_cfg;	/* 0x154 HDMI slow module clock */
+	u32 reserved19;		/* 0x158 */
+	u32 mbus_clk_cfg;	/* 0x15c MBUS module clock */
+	u32 reserved20[2];	/* 0x160 */
+	u32 mipi_dsi_clk_cfg;	/* 0x168 MIPI DSI clock control */
+	u32 reserved21[13];	/* 0x16c */
+	u32 gpu_core_clk_cfg;	/* 0x1a0 GPU core clock config */
+	u32 gpu_mem_clk_cfg;	/* 0x1a4 GPU memory clock config */
+	u32 gpu_hyd_clk_cfg;	/* 0x1a8 GPU HYD clock config */
+	u32 reserved22[21];	/* 0x1ac */
+	u32 pll_stable0;	/* 0x200 PLL stable time 0 */
+	u32 pll_stable1;	/* 0x204 PLL stable time 1 */
+	u32 reserved23;		/* 0x208 */
+	u32 pll_stable_status;	/* 0x20c PLL stable status register */
+	u32 reserved24[4];	/* 0x210 */
+	u32 pll1_c0_bias_cfg;	/* 0x220 PLL1 c0cpu# Bias config */
+	u32 pll2_bias_cfg;	/* 0x224 PLL2 audio Bias config */
+	u32 pll3_bias_cfg;	/* 0x228 PLL3 video Bias config */
+	u32 pll4_bias_cfg;	/* 0x22c PLL4 ve Bias config */
+	u32 pll5_bias_cfg;	/* 0x230 PLL5 ddr Bias config */
+	u32 pll6_bias_cfg;	/* 0x234 PLL6 periph Bias config */
+	u32 pll1_c1_bias_cfg;	/* 0x238 PLL1 c1cpu# Bias config */
+	u32 pll8_bias_cfg;	/* 0x23c PLL7 Bias config */
+	u32 reserved25;		/* 0x240 */
+	u32 pll9_bias_cfg;	/* 0x244 PLL9 hsic Bias config */
+	u32 de_bias_cfg;	/* 0x248 display engine Bias config */
+	u32 video1_bias_cfg;	/* 0x24c pll video1 bias register */
+	u32 c0_tuning_cfg;	/* 0x250 pll c0cpu# tuning register */
+	u32 c1_tuning_cfg;	/* 0x254 pll c1cpu# tuning register */
+	u32 reserved26[11];	/* 0x258 */
+	u32 pll2_pattern_cfg0;	/* 0x284 PLL2 Pattern register 0 */
+	u32 pll3_pattern_cfg0;	/* 0x288 PLL3 Pattern register 0 */
+	u32 reserved27;		/* 0x28c */
+	u32 pll5_pattern_cfg0;	/* 0x290 PLL5 Pattern register 0*/
+	u32 reserved28[4];	/* 0x294 */
+	u32 pll2_pattern_cfg1;	/* 0x2a4 PLL2 Pattern register 1 */
+	u32 pll3_pattern_cfg1;	/* 0x2a8 PLL3 Pattern register 1 */
+	u32 reserved29;		/* 0x2ac */
+	u32 pll5_pattern_cfg1;	/* 0x2b0 PLL5 Pattern register 1 */
+	u32 reserved30[3];	/* 0x2b4 */
+	u32 ahb_reset0_cfg;	/* 0x2c0 AHB1 Reset 0 config */
+	u32 ahb_reset1_cfg;	/* 0x2c4 AHB1 Reset 1 config */
+	u32 ahb_reset2_cfg;	/* 0x2c8 AHB1 Reset 2 config */
+	u32 reserved31;
+	u32 ahb_reset3_cfg;	/* 0x2d0 AHB1 Reset 3 config */
+	u32 reserved32;		/* 0x2d4 */
+	u32 apb2_reset_cfg;	/* 0x2d8 BUS Reset 4 config */
+};
+
+/* apb2 bit field */
+#define APB2_CLK_SRC_LOSC		(0x0 << 24)
+#define APB2_CLK_SRC_OSC24M		(0x1 << 24)
+#define APB2_CLK_SRC_PLL6		(0x2 << 24)
+#define APB2_CLK_SRC_MASK		(0x3 << 24)
+#define APB2_CLK_RATE_N_1		(0x0 << 16)
+#define APB2_CLK_RATE_N_2		(0x1 << 16)
+#define APB2_CLK_RATE_N_4		(0x2 << 16)
+#define APB2_CLK_RATE_N_8		(0x3 << 16)
+#define APB2_CLK_RATE_N_MASK		(3 << 16)
+#define APB2_CLK_RATE_M(m)		(((m)-1) << 0)
+#define APB2_CLK_RATE_M_MASK            (0x1f << 0)
+
+/* apb2 gate field */
+#define APB2_GATE_UART_SHIFT	(16)
+#define APB2_GATE_UART_MASK		(0xff << APB2_GATE_UART_SHIFT)
+#define APB2_GATE_TWI_SHIFT	(0)
+#define APB2_GATE_TWI_MASK		(0xf << APB2_GATE_TWI_SHIFT)
+
+/* cpu_axi_cfg bits */
+#define AXI0_DIV_SHIFT			0
+#define AXI1_DIV_SHIFT			16
+#define C0_CPUX_CLK_SRC_SHIFT		12
+#define C1_CPUX_CLK_SRC_SHIFT		28
+
+#define AXI_DIV_1			0
+#define AXI_DIV_2			1
+#define AXI_DIV_3			2
+#define AXI_DIV_4			3
+#define CPU_CLK_SRC_OSC24M		0
+#define CPU_CLK_SRC_PLL1		1
+
+#define CCM_PLL1_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL1_CTRL_P(n)		(((n) & 0x1) << 16)
+#define CCM_PLL1_CTRL_EN		(0x1 << 31)
+#define CMM_PLL1_CLOCK_TIME_2		(0x2 << 24)
+
+#define PLL8_CFG_DEFAULT		0x42800
+#define CCM_CCI400_CLK_SEL_HSIC		(0x2<<24)
+
+#define CCM_PLL5_DIV1_SHIFT		16
+#define CCM_PLL5_DIV2_SHIFT		18
+#define CCM_PLL5_CTRL_N(n)		(((n) - 1) << 8)
+#define CCM_PLL5_CTRL_UPD		(0x1 << 30)
+#define CCM_PLL5_CTRL_EN		(0x1 << 31)
+
+#define PLL6_CFG_DEFAULT		0x80001900 /* 600 MHz */
+#define CCM_PLL6_CTRL_N_SHIFT		8
+#define CCM_PLL6_CTRL_N_MASK		(0xff << CCM_PLL6_CTRL_N_SHIFT)
+#define CCM_PLL6_CTRL_DIV1_SHIFT	16
+#define CCM_PLL6_CTRL_DIV1_MASK		(0x1 << CCM_PLL6_CTRL_DIV1_SHIFT)
+#define CCM_PLL6_CTRL_DIV2_SHIFT	18
+#define CCM_PLL6_CTRL_DIV2_MASK		(0x1 << CCM_PLL6_CTRL_DIV2_SHIFT)
+
+#define AHB1_ABP1_DIV_DEFAULT		0x00002190
+#define AHB1_CLK_SRC_MASK		(0x3<<12)
+#define AHB1_CLK_SRC_INTOSC		(0x0<<12)
+#define AHB1_CLK_SRC_OSC24M		(0x1<<12)
+#define AHB1_CLK_SRC_PLL6		(0x2<<12)
+
+#define AXI_GATE_OFFSET_DRAM		0
+
+/* ahb_gate0 offsets */
+#define AHB_GATE_OFFSET_USB_OHCI1	30
+#define AHB_GATE_OFFSET_USB_OHCI0	29
+#define AHB_GATE_OFFSET_USB_EHCI1	27
+#define AHB_GATE_OFFSET_USB_EHCI0	26
+#define AHB_GATE_OFFSET_USB0		24
+#define AHB_GATE_OFFSET_SPI1		21
+#define AHB_GATE_OFFSET_SPI0		20
+#define AHB_GATE_OFFSET_HSTIMER		19
+#define AHB_GATE_OFFSET_EMAC		17
+#define AHB_GATE_OFFSET_MCTL		14
+#define AHB_GATE_OFFSET_GMAC		17
+#define AHB_GATE_OFFSET_NAND0		13
+#define AHB_GATE_OFFSET_MMC0		8
+#define AHB_GATE_OFFSET_MMC(n)		(AHB_GATE_OFFSET_MMC0 + (n))
+#define AHB_GATE_OFFSET_DMA		6
+#define AHB_GATE_OFFSET_SS		5
+
+/* ahb_gate1 offsets */
+#define AHB_GATE_OFFSET_DRC0		25
+#define AHB_GATE_OFFSET_DE_FE0		14
+#define AHB_GATE_OFFSET_DE_BE0		12
+#define AHB_GATE_OFFSET_HDMI		11
+#define AHB_GATE_OFFSET_LCD1		5
+#define AHB_GATE_OFFSET_LCD0		4
+
+#define CCM_MMC_CTRL_M(x)		((x) - 1)
+#define CCM_MMC_CTRL_OCLK_DLY(x)	((x) << 8)
+#define CCM_MMC_CTRL_N(x)		((x) << 16)
+#define CCM_MMC_CTRL_SCLK_DLY(x)	((x) << 20)
+#define CCM_MMC_CTRL_OSCM24		(0x0 << 24)
+#define CCM_MMC_CTRL_PLL6		(0x1 << 24)
+#define CCM_MMC_CTRL_MODE_SEL_NEW	(0x1 << 30)
+#define CCM_MMC_CTRL_ENABLE		(0x1 << 31)
+
+#define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
+#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
+#define CCM_USB_CTRL_HSIC_RST (0x1 << 2)
+/* There is no global phy clk gate on sun6i, define as 0 */
+#define CCM_USB_CTRL_PHYGATE 0
+#define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
+#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
+#define CCM_USB_CTRL_HSIC_CLK (0x1 << 10)
+#define CCM_USB_CTRL_12M_CLK (0x1 << 11)
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
+
+#define CCM_GMAC_CTRL_TX_CLK_SRC_MII	0x0
+#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
+#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
+#define CCM_GMAC_CTRL_GPIT_MII		(0x0 << 2)
+#define CCM_GMAC_CTRL_GPIT_RGMII	(0x1 << 2)
+#define CCM_GMAC_CTRL_RX_CLK_DELAY(x)	((x) << 5)
+#define CCM_GMAC_CTRL_TX_CLK_DELAY(x)	((x) << 10)
+
+#define MDFS_CLK_DEFAULT		0x81000002 /* PLL6 / 3 */
+
+#define CCM_DRAMCLK_CFG_DIV(x)		((x - 1) << 0)
+#define CCM_DRAMCLK_CFG_DIV_MASK	(0xf << 0)
+#define CCM_DRAMCLK_CFG_DIV0(x)		((x - 1) << 8)
+#define CCM_DRAMCLK_CFG_DIV0_MASK	(0xf << 8)
+#define CCM_DRAMCLK_CFG_UPD		(0x1 << 16)
+#define CCM_DRAMCLK_CFG_RST		(0x1 << 31)
+
+#define CCM_DRAMPLL_CFG_SRC_PLL5	(0x0 << 16) /* Select PLL5 (DDR0) */
+#define CCM_DRAMPLL_CFG_SRC_PLL11	(0x1 << 16) /* Select PLL11 (DDR1) */
+#define CCM_DRAMPLL_CFG_SRC_MASK	(0x1 << 16)
+
+#define CCM_MBUS_RESET_RESET		(0x1 << 31)
+
+#define CCM_DRAM_GATE_OFFSET_DE_FE0	24
+#define CCM_DRAM_GATE_OFFSET_DE_FE1	25
+#define CCM_DRAM_GATE_OFFSET_DE_BE0	26
+#define CCM_DRAM_GATE_OFFSET_DE_BE1	27
+
+
+#define MBUS_CLK_DEFAULT		0x81000002 /* PLL6 / 2 */
+
+#define MBUS_CLK_GATE			(0x1 << 31)
+
+/* ahb_reset0 offsets */
+#define AHB_RESET_OFFSET_GMAC		17
+#define AHB_RESET_OFFSET_MCTL		14
+#define AHB_RESET_OFFSET_MMC3		11
+#define AHB_RESET_OFFSET_MMC2		10
+#define AHB_RESET_OFFSET_MMC1		9
+#define AHB_RESET_OFFSET_MMC0		8
+#define AHB_RESET_OFFSET_MMC(n)		(AHB_RESET_OFFSET_MMC0 + (n))
+#define AHB_RESET_OFFSET_SS		5
+
+/* ahb_reset1 offsets */
+#define AHB_RESET_OFFSET_SAT		26
+#define AHB_RESET_OFFSET_DRC0		25
+#define AHB_RESET_OFFSET_DE_FE0		14
+#define AHB_RESET_OFFSET_DE_BE0		12
+#define AHB_RESET_OFFSET_HDMI		11
+#define AHB_RESET_OFFSET_LCD1		5
+#define AHB_RESET_OFFSET_LCD0		4
+
+/* ahb_reset2 offsets */
+#define AHB_RESET_OFFSET_LVDS		0
+
+/* apb2 reset */
+#define APB2_RESET_UART_SHIFT		(16)
+#define APB2_RESET_UART_MASK		(0xff << APB2_RESET_UART_SHIFT)
+#define APB2_RESET_TWI_SHIFT		(0)
+#define APB2_RESET_TWI_MASK		(0xf << APB2_RESET_TWI_SHIFT)
+
+
+#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int hz);
+void clock_set_pll5(unsigned int clk);
+unsigned int clock_get_pll6(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_SUN8I_A83T_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun9i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun9i.h
new file mode 100644
index 000000000..fe6b8ba27
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/clock_sun9i.h
@@ -0,0 +1,230 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * sun9i clock register definitions
+ *
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _SUNXI_CLOCK_SUN9I_H
+#define _SUNXI_CLOCK_SUN9I_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct sunxi_ccm_reg {
+	u32 pll1_c0_cfg;	/* 0x00 c0cpu# pll configuration */
+	u32 pll2_c1_cfg;	/* 0x04 c1cpu# pll configuration */
+	u32 pll3_audio_cfg;	/* 0x08 audio pll configuration */
+	u32 pll4_periph0_cfg;	/* 0x0c peripheral0 pll configuration */
+	u32 pll5_ve_cfg;	/* 0x10 videoengine pll configuration */
+	u32 pll6_ddr_cfg;	/* 0x14 ddr pll configuration */
+	u32 pll7_video0_cfg;	/* 0x18 video0 pll configuration */
+	u32 pll8_video1_cfg;	/* 0x1c video1 pll configuration */
+	u32 pll9_gpu_cfg;	/* 0x20 gpu pll configuration */
+	u32 pll10_de_cfg;	/* 0x24 displayengine pll configuration */
+	u32 pll11_isp_cfg;	/* 0x28 isp pll6 ontrol */
+	u32 pll12_periph1_cfg;	/* 0x2c peripheral1 pll configuration */
+	u8 reserved1[0x20];	/* 0x30 */
+	u32 cpu_clk_source;	/* 0x50 cpu clk source configuration */
+	u32 c0_cfg;		/* 0x54 cpu cluster 0 clock configuration */
+	u32 c1_cfg;		/* 0x58 cpu cluster 1 clock configuration */
+	u32 gtbus_cfg;		/* 0x5c gtbus clock configuration */
+	u32 ahb0_cfg;		/* 0x60 ahb0 clock configuration */
+	u32 ahb1_cfg;		/* 0x64 ahb1 clock configuration */
+	u32 ahb2_cfg;		/* 0x68 ahb2 clock configuration */
+	u8 reserved2[0x04];	/* 0x6c */
+	u32 apb0_cfg;		/* 0x70 apb0 clock configuration */
+	u32 apb1_cfg;		/* 0x74 apb1 clock configuration */
+	u32 cci400_cfg;		/* 0x78 cci400 clock configuration */
+	u8 reserved3[0x04];	/* 0x7c */
+	u32 ats_cfg;		/* 0x80 ats clock configuration */
+	u32 trace_cfg;		/* 0x84 trace clock configuration */
+	u8 reserved4[0x14];     /* 0x88 */
+	u32 pll_stable_status;  /* 0x9c */
+	u8 reserved5[0xe0];	/* 0xa0 */
+	u32 clk_output_a;	/* 0x180 clk_output_a */
+	u32 clk_output_b;	/* 0x184 clk_output_a */
+	u8 reserved6[0x278];	/* 0x188 */
+
+	u32 nand0_clk_cfg;	/* 0x400 nand0 clock configuration0 */
+	u32 nand0_clk_cfg1;	/* 0x404 nand1 clock configuration */
+	u8 reserved7[0x08];	/* 0x408 */
+	u32 sd0_clk_cfg;	/* 0x410 sd0 clock configuration */
+	u32 sd1_clk_cfg;	/* 0x414 sd1 clock configuration */
+	u32 sd2_clk_cfg;	/* 0x418 sd2 clock configuration */
+	u32 sd3_clk_cfg;	/* 0x41c sd3 clock configuration */
+	u8 reserved8[0x08];	/* 0x420 */
+	u32 ts_clk_cfg;		/* 0x428 transport stream clock cfg */
+	u32 ss_clk_cfg;		/* 0x42c security system clock cfg */
+	u32 spi0_clk_cfg;	/* 0x430 spi0 clock configuration */
+	u32 spi1_clk_cfg;	/* 0x434 spi1 clock configuration */
+	u32 spi2_clk_cfg;	/* 0x438 spi2 clock configuration */
+	u32 spi3_clk_cfg;	/* 0x43c spi3 clock configuration */
+	u8 reserved9[0x44];	/* 0x440 */
+	u32 dram_clk_cfg;       /* 0x484 DRAM (controller) clock config */
+	u8 reserved10[0x8];     /* 0x488 */
+	u32 de_clk_cfg;		/* 0x490 display engine clock configuration */
+	u8 reserved11[0x04];	/* 0x494 */
+	u32 mp_clk_cfg;		/* 0x498 mp clock configuration */
+	u32 lcd0_clk_cfg;	/* 0x49c LCD0 module clock */
+	u32 lcd1_clk_cfg;	/* 0x4a0 LCD1 module clock */
+	u8 reserved12[0x1c];	/* 0x4a4 */
+	u32 csi_isp_clk_cfg;	/* 0x4c0 CSI ISP module clock */
+	u32 csi0_clk_cfg;	/* 0x4c4 CSI0 module clock */
+	u32 csi1_clk_cfg;	/* 0x4c8 CSI1 module clock */
+	u32 fd_clk_cfg;		/* 0x4cc FD module clock */
+	u32 ve_clk_cfg;		/* 0x4d0 VE module clock */
+	u32 avs_clk_cfg;	/* 0x4d4 AVS module clock */
+	u8 reserved13[0x18];	/* 0x4d8 */
+	u32 gpu_core_clk_cfg;	/* 0x4f0 GPU core clock config */
+	u32 gpu_mem_clk_cfg;	/* 0x4f4 GPU memory clock config */
+	u32 gpu_axi_clk_cfg;	/* 0x4f8 GPU AXI clock config */
+	u8 reserved14[0x10];	/* 0x4fc */
+	u32 gp_adc_clk_cfg;	/* 0x50c General Purpose ADC clk config */
+	u8 reserved15[0x70];	/* 0x510 */
+
+	u32 ahb_gate0;		/* 0x580 AHB0 Gating Register */
+	u32 ahb_gate1;		/* 0x584 AHB1 Gating Register */
+	u32 ahb_gate2;		/* 0x588 AHB2 Gating Register */
+	u8 reserved16[0x04];	/* 0x58c */
+	u32 apb0_gate;		/* 0x590 APB0 Clock Gating Register */
+	u32 apb1_gate;		/* 0x594 APB1 Clock Gating Register */
+	u8 reserved17[0x08];	/* 0x598 */
+	u32 ahb_reset0_cfg;	/* 0x5a0 AHB0 Software Reset Register */
+	u32 ahb_reset1_cfg;	/* 0x5a4 AHB1 Software Reset Register */
+	u32 ahb_reset2_cfg;	/* 0x5a8 AHB2 Software Reset Register */
+	u8 reserved18[0x04];	/* 0x5ac */
+	u32 apb0_reset_cfg;	/* 0x5b0 Bus Software Reset Register 3 */
+	u32 apb1_reset_cfg;	/* 0x5b4 Bus Software Reset Register 4 */
+};
+
+#define CCM_PLL4_CTRL_N_SHIFT		8
+#define CCM_PLL4_CTRL_N_MASK		(0xff << CCM_PLL4_CTRL_N_SHIFT)
+#define CCM_PLL4_CTRL_P_SHIFT		16
+#define CCM_PLL4_CTRL_P_MASK		(0x1 << CCM_PLL4_CTRL_P_SHIFT)
+#define CCM_PLL4_CTRL_M_SHIFT		18
+#define CCM_PLL4_CTRL_M_MASK		(0x1 << CCM_PLL4_CTRL_M_SHIFT)
+
+/* pllx_cfg bits */
+#define CCM_PLL1_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL1_CTRL_P(n)		(((n) & 0x1) << 16)
+#define CCM_PLL1_CTRL_EN		(1 << 31)
+#define CCM_PLL1_CLOCK_TIME_2		(2 << 24)
+
+#define CCM_PLL2_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL2_CTRL_P(n)		(((n) & 0x1) << 16)
+#define CCM_PLL2_CTRL_EN		(1 << 31)
+#define CCM_PLL2_CLOCK_TIME_2		(2 << 24)
+
+#define CCM_PLL4_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL4_CTRL_EN		(1 << 31)
+
+#define CCM_PLL6_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL6_CTRL_P(p)		(((p) & 0x1) << 16)
+#define CCM_PLL6_CTRL_EN		(1 << 31)
+#define CCM_PLL6_CFG_UPDATE             (1 << 30)
+
+#define CCM_PLL12_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL12_CTRL_EN		(1 << 31)
+
+#define PLL_C0CPUX_STATUS               (1 << 0)
+#define PLL_C1CPUX_STATUS               (1 << 1)
+#define PLL_DDR_STATUS                  (1 << 5)
+#define PLL_PERIPH1_STATUS              (1 << 11)
+
+/* cpu_clk_source bits */
+#define C0_CPUX_CLK_SRC_SHIFT           0
+#define C1_CPUX_CLK_SRC_SHIFT           8
+#define C0_CPUX_CLK_SRC_MASK            (1 << C0_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_MASK            (1 << C1_CPUX_CLK_SRC_SHIFT)
+#define C0_CPUX_CLK_SRC_OSC24M		(0 << C0_CPUX_CLK_SRC_SHIFT)
+#define C0_CPUX_CLK_SRC_PLL1		(1 << C0_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_OSC24M		(0 << C1_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_PLL2		(1 << C1_CPUX_CLK_SRC_SHIFT)
+
+/* c0_cfg */
+#define C0_CFG_AXI0_CLK_DIV_RATIO(n)    (((n - 1) & 0x3) << 0)
+#define C0_CFG_APB0_CLK_DIV_RATIO(n)    (((n - 1) & 0x3) << 8)
+
+/* ahbx_cfg */
+#define AHBx_SRC_CLK_SELECT_SHIFT       24
+#define AHBx_SRC_MASK                   (0x3 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB0_SRC_GTBUS_CLK              (0x0 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB1_SRC_GTBUS_CLK              (0x0 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB2_SRC_OSC24M                 (0x0 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_SRC_PLL_PERIPH0            (0x1 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_SRC_PLL_PERIPH1            (0x2 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_CLK_DIV_RATIO(n)           (((ffs(n) - 1) & 0x3) << 0)
+
+/* apb0_cfg */
+#define APB0_SRC_CLK_SELECT_SHIFT       24
+#define APB0_SRC_MASK                   (0x1 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_SRC_OSC24M                 (0x0 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_SRC_PLL_PERIPH0            (0x1 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_CLK_DIV_RATIO(n)           (((ffs(n) - 1) & 0x3) << 0)
+
+/* gtbus_clk_cfg */
+#define GTBUS_SRC_CLK_SELECT_SHIFT      24
+#define GTBUS_SRC_MASK                  (0x3 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_OSC24M                (0x0 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_PLL_PERIPH0           (0x1 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_PLL_PERIPH1           (0x2 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_CLK_DIV_RATIO(n)          (((n - 1) & 0x3) << 0)
+
+/* cci400_clk_cfg */
+#define CCI400_SRC_CLK_SELECT_SHIFT     24
+#define CCI400_SRC_MASK                 (0x3 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_OSC24M               (0x0 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_PLL_PERIPH0          (0x1 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_PLL_PERIPH1          (0x2 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_CLK_DIV_RATIO(n)         (((n - 1) & 0x3) << 0)
+
+/* sd#_clk_cfg fields */
+#define CCM_MMC_CTRL_M(x)		((x) - 1)
+#define CCM_MMC_CTRL_OCLK_DLY(x)	((x) << 8)
+#define CCM_MMC_CTRL_N(x)		((x) << 16)
+#define CCM_MMC_CTRL_SCLK_DLY(x)	((x) << 20)
+#define CCM_MMC_CTRL_OSCM24		(0 << 24)
+#define CCM_MMC_CTRL_PLL_PERIPH0	(1 << 24)
+#define CCM_MMC_CTRL_ENABLE		(1 << 31)
+
+/* ahb_gate0 fields */
+#define AHB_GATE_OFFSET_MCTL		14
+
+/* On sun9i all sdc-s share their ahb gate, so ignore (x) */
+#define AHB_GATE_OFFSET_NAND0		13
+#define AHB_GATE_OFFSET_MMC(x)		8
+
+/* ahb gate1 field */
+#define AHB_GATE_OFFSET_DMA		24
+
+/* apb1_gate fields */
+#define APB1_GATE_UART_SHIFT		16
+#define APB1_GATE_UART_MASK		(0xff << APB1_GATE_UART_SHIFT)
+#define APB1_GATE_TWI_SHIFT		0
+#define APB1_GATE_TWI_MASK		(0xf << APB1_GATE_TWI_SHIFT)
+
+/* ahb_reset0_cfg fields */
+#define AHB_RESET_OFFSET_MCTL		14
+
+/* On sun9i all sdc-s share their ahb reset, so ignore (x) */
+#define AHB_RESET_OFFSET_MMC(x)		8
+
+/* apb1_reset_cfg fields */
+#define APB1_RESET_UART_SHIFT		16
+#define APB1_RESET_UART_MASK		(0xff << APB1_RESET_UART_SHIFT)
+#define APB1_RESET_TWI_SHIFT		0
+#define APB1_RESET_TWI_MASK		(0xf << APB1_RESET_TWI_SHIFT)
+
+
+#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int clk);
+void clock_set_pll2(unsigned int clk);
+void clock_set_pll4(unsigned int clk);
+void clock_set_pll6(unsigned int clk);
+void clock_set_pll12(unsigned int clk);
+unsigned int clock_get_pll4_periph0(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_SUN9I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu.h
new file mode 100644
index 000000000..b08f20237
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _SUNXI_CPU_H
+#define _SUNXI_CPU_H
+
+#if defined(CONFIG_MACH_SUN9I)
+#include <asm/arch/cpu_sun9i.h>
+#elif defined(CONFIG_SUN50I_GEN_H6)
+#include <asm/arch/cpu_sun50i_h6.h>
+#else
+#include <asm/arch/cpu_sun4i.h>
+#endif
+
+#define SOCID_A64	0x1689
+#define SOCID_H3	0x1680
+#define SOCID_V3S	0x1681
+#define SOCID_H5	0x1718
+#define SOCID_R40	0x1701
+
+#endif /* _SUNXI_CPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
new file mode 100644
index 000000000..02ce73954
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -0,0 +1,220 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#ifndef _SUNXI_CPU_SUN4I_H
+#define _SUNXI_CPU_SUN4I_H
+
+#define SUNXI_SRAM_A1_BASE		0x00000000
+#define SUNXI_SRAM_A1_SIZE		(16 * 1024)	/* 16 kiB */
+
+#define SUNXI_SRAM_A2_BASE		0x00004000	/* 16 kiB */
+#define SUNXI_SRAM_A3_BASE		0x00008000	/* 13 kiB */
+#define SUNXI_SRAM_A4_BASE		0x0000b400	/* 3 kiB */
+#define SUNXI_SRAM_D_BASE		0x00010000	/* 4 kiB */
+#define SUNXI_SRAM_B_BASE		0x00020000	/* 64 kiB (secure) */
+
+#define SUNXI_DE2_BASE			0x01000000
+
+#ifdef CONFIG_MACH_SUN8I_A83T
+#define SUNXI_CPUCFG_BASE		0x01700000
+#endif
+
+#define SUNXI_SRAMC_BASE		0x01c00000
+#define SUNXI_DRAMC_BASE		0x01c01000
+#define SUNXI_DMA_BASE			0x01c02000
+#define SUNXI_NFC_BASE			0x01c03000
+#define SUNXI_TS_BASE			0x01c04000
+#define SUNXI_SPI0_BASE			0x01c05000
+#define SUNXI_SPI1_BASE			0x01c06000
+#define SUNXI_MS_BASE			0x01c07000
+#define SUNXI_TVD_BASE			0x01c08000
+#define SUNXI_CSI0_BASE			0x01c09000
+#ifndef CONFIG_MACH_SUNXI_H3_H5
+#define SUNXI_TVE0_BASE			0x01c0a000
+#endif
+#define SUNXI_EMAC_BASE			0x01c0b000
+#define SUNXI_LCD0_BASE			0x01c0C000
+#define SUNXI_LCD1_BASE			0x01c0d000
+#define SUNXI_VE_BASE			0x01c0e000
+#define SUNXI_MMC0_BASE			0x01c0f000
+#define SUNXI_MMC1_BASE			0x01c10000
+#define SUNXI_MMC2_BASE			0x01c11000
+#define SUNXI_MMC3_BASE			0x01c12000
+#ifdef CONFIG_SUNXI_GEN_SUN4I
+#define SUNXI_USB0_BASE			0x01c13000
+#define SUNXI_USB1_BASE			0x01c14000
+#endif
+#define SUNXI_SS_BASE			0x01c15000
+#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I)
+#define SUNXI_HDMI_BASE			0x01c16000
+#endif
+#define SUNXI_SPI2_BASE			0x01c17000
+#define SUNXI_SATA_BASE			0x01c18000
+#ifdef CONFIG_SUNXI_GEN_SUN4I
+#define SUNXI_PATA_BASE			0x01c19000
+#define SUNXI_ACE_BASE			0x01c1a000
+#define SUNXI_TVE1_BASE			0x01c1b000
+#define SUNXI_USB2_BASE			0x01c1c000
+#endif
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
+#define SUNXI_USBPHY_BASE		0x01c19000
+#define SUNXI_USB0_BASE			SUNXI_USBPHY_BASE
+#define SUNXI_USB1_BASE			0x01c1a000
+#define SUNXI_USB2_BASE			0x01c1b000
+#define SUNXI_USB3_BASE			0x01c1c000
+#define SUNXI_USB4_BASE			0x01c1d000
+#else
+#define SUNXI_USB0_BASE			0x01c19000
+#define SUNXI_USB1_BASE			0x01c1a000
+#define SUNXI_USB2_BASE			0x01c1b000
+#endif
+#endif
+#define SUNXI_CSI1_BASE			0x01c1d000
+#define SUNXI_TZASC_BASE		0x01c1e000
+#define SUNXI_SPI3_BASE			0x01c1f000
+
+#define SUNXI_CCM_BASE			0x01c20000
+#define SUNXI_INTC_BASE			0x01c20400
+#define SUNXI_PIO_BASE			0x01c20800
+#define SUNXI_TIMER_BASE		0x01c20c00
+#ifndef CONFIG_SUNXI_GEN_SUN6I
+#define SUNXI_PWM_BASE			0x01c20e00
+#endif
+#define SUNXI_SPDIF_BASE		0x01c21000
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+#define SUNXI_PWM_BASE			0x01c21400
+#else
+#define SUNXI_AC97_BASE			0x01c21400
+#endif
+#define SUNXI_IR0_BASE			0x01c21800
+#define SUNXI_IR1_BASE			0x01c21c00
+
+#define SUNXI_IIS_BASE			0x01c22400
+#define SUNXI_LRADC_BASE		0x01c22800
+#define SUNXI_AD_DA_BASE		0x01c22c00
+#define SUNXI_KEYPAD_BASE		0x01c23000
+#define SUNXI_TZPC_BASE			0x01c23400
+
+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUNXI_H3_H5) || \
+defined(CONFIG_MACH_SUN50I)
+/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
+#define SUNXI_SIDC_BASE			0x01c14000
+#define SUNXI_SID_BASE			0x01c14200
+#else
+#define SUNXI_SID_BASE			0x01c23800
+#endif
+
+#define SUNXI_SJTAG_BASE		0x01c23c00
+
+#define SUNXI_TP_BASE			0x01c25000
+#define SUNXI_PMU_BASE			0x01c25400
+
+#if defined CONFIG_MACH_SUN7I || defined CONFIG_MACH_SUN8I_R40
+#define SUNXI_CPUCFG_BASE		0x01c25c00
+#endif
+
+#define SUNXI_UART0_BASE		0x01c28000
+#define SUNXI_UART1_BASE		0x01c28400
+#define SUNXI_UART2_BASE		0x01c28800
+#define SUNXI_UART3_BASE		0x01c28c00
+#define SUNXI_UART4_BASE		0x01c29000
+#define SUNXI_UART5_BASE		0x01c29400
+#define SUNXI_UART6_BASE		0x01c29800
+#define SUNXI_UART7_BASE		0x01c29c00
+#define SUNXI_PS2_0_BASE		0x01c2a000
+#define SUNXI_PS2_1_BASE		0x01c2a400
+
+#define SUNXI_TWI0_BASE			0x01c2ac00
+#define SUNXI_TWI1_BASE			0x01c2b000
+#define SUNXI_TWI2_BASE			0x01c2b400
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_TWI3_BASE			0x01c0b800
+#endif
+#ifdef CONFIG_MACH_SUN7I
+#define SUNXI_TWI3_BASE			0x01c2b800
+#define SUNXI_TWI4_BASE			0x01c2c000
+#endif
+
+#define SUNXI_CAN_BASE			0x01c2bc00
+
+#define SUNXI_SCR_BASE			0x01c2c400
+
+#ifndef CONFIG_MACH_SUN6I
+#define SUNXI_GPS_BASE			0x01c30000
+#define SUNXI_MALI400_BASE		0x01c40000
+#define SUNXI_GMAC_BASE			0x01c50000
+#else
+#define SUNXI_GMAC_BASE			0x01c30000
+#endif
+
+#define SUNXI_DRAM_COM_BASE		0x01c62000
+#define SUNXI_DRAM_CTL0_BASE		0x01c63000
+#define SUNXI_DRAM_CTL1_BASE		0x01c64000
+#define SUNXI_DRAM_PHY0_BASE		0x01c65000
+#define SUNXI_DRAM_PHY1_BASE		0x01c66000
+
+#define SUNXI_GIC400_BASE		0x01c80000
+
+/* module sram */
+#define SUNXI_SRAM_C_BASE		0x01d00000
+
+#ifndef CONFIG_MACH_SUN8I_H3
+#define SUNXI_DE_FE0_BASE		0x01e00000
+#else
+#define SUNXI_TVE0_BASE			0x01e00000
+#endif
+#define SUNXI_DE_FE1_BASE		0x01e20000
+#define SUNXI_DE_BE0_BASE		0x01e60000
+#ifndef CONFIG_MACH_SUN50I_H5
+#define SUNXI_DE_BE1_BASE		0x01e40000
+#else
+#define SUNXI_TVE0_BASE			0x01e40000
+#endif
+#define SUNXI_MP_BASE			0x01e80000
+#define SUNXI_AVG_BASE			0x01ea0000
+
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
+#define SUNXI_HDMI_BASE			0x01ee0000
+#endif
+
+#define SUNXI_RTC_BASE			0x01f00000
+#define SUNXI_PRCM_BASE			0x01f01400
+
+#if defined CONFIG_SUNXI_GEN_SUN6I && \
+    !defined CONFIG_MACH_SUN8I_A83T && \
+    !defined CONFIG_MACH_SUN8I_R40
+#define SUNXI_CPUCFG_BASE		0x01f01c00
+#endif
+
+#define SUNXI_R_TWI_BASE		0x01f02400
+#define SUNXI_R_UART_BASE		0x01f02800
+#define SUNXI_R_PIO_BASE		0x01f02c00
+#define SUN6I_P2WI_BASE			0x01f03400
+#define SUNXI_RSB_BASE			0x01f03400
+
+/* CoreSight Debug Module */
+#define SUNXI_CSDM_BASE			0x3f500000
+
+#define SUNXI_DDRII_DDRIII_BASE		0x40000000	/* 2 GiB */
+
+#define SUNXI_BROM_BASE			0xffff0000	/* 32 kiB */
+
+#define SUNXI_CPU_CFG			(SUNXI_TIMER_BASE + 0x13c)
+
+/* SS bonding ids used for cpu identification */
+#define SUNXI_SS_BOND_ID_A31		4
+#define SUNXI_SS_BOND_ID_A31S		5
+
+#ifndef __ASSEMBLY__
+void sunxi_board_init(void);
+void sunxi_reset(void);
+int sunxi_get_ss_bonding_id(void);
+int sunxi_get_sid(unsigned int *sid);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _SUNXI_CPU_SUN4I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
new file mode 100644
index 000000000..d9cf8ae04
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_CPU_SUN50I_H6_H
+#define _SUNXI_CPU_SUN50I_H6_H
+
+#define SUNXI_SRAM_A1_BASE		CONFIG_SUNXI_SRAM_ADDRESS
+#define SUNXI_SRAM_C_BASE		0x00028000
+#define SUNXI_SRAM_A2_BASE		0x00100000
+
+#define SUNXI_DE3_BASE			0x01000000
+#define SUNXI_SS_BASE			0x01904000
+#define SUNXI_EMCE_BASE			0x01905000
+
+#define SUNXI_SRAMC_BASE		0x03000000
+#define SUNXI_CCM_BASE			0x03001000
+#define SUNXI_DMA_BASE			0x03002000
+/* SID address space starts at 0x03006000, but e-fuse is at offset 0x200 */
+#define SUNXI_SIDC_BASE			0x03006000
+#define SUNXI_SID_BASE			0x03006200
+#define SUNXI_TIMER_BASE		0x03009000
+#define SUNXI_PIO_BASE			0x0300B000
+#define SUNXI_PSI_BASE			0x0300C000
+
+#define SUNXI_GIC400_BASE		0x03020000
+#define SUNXI_IOMMU_BASE		0x030F0000
+
+#ifdef CONFIG_MACH_SUN50I_H6
+#define SUNXI_DRAM_COM_BASE		0x04002000
+#define SUNXI_DRAM_CTL0_BASE		0x04003000
+#define SUNXI_DRAM_PHY0_BASE		0x04005000
+#endif
+#define SUNXI_NFC_BASE			0x04011000
+#define SUNXI_MMC0_BASE			0x04020000
+#define SUNXI_MMC1_BASE			0x04021000
+#define SUNXI_MMC2_BASE			0x04022000
+#ifdef CONFIG_MACH_SUN50I_H616
+#define SUNXI_DRAM_COM_BASE		0x047FA000
+#define SUNXI_DRAM_CTL0_BASE		0x047FB000
+#define SUNXI_DRAM_PHY0_BASE		0x04800000
+#endif
+
+#define SUNXI_UART0_BASE		0x05000000
+#define SUNXI_UART1_BASE		0x05000400
+#define SUNXI_UART2_BASE		0x05000800
+#define SUNXI_UART3_BASE		0x05000C00
+#define SUNXI_TWI0_BASE			0x05002000
+#define SUNXI_TWI1_BASE			0x05002400
+#define SUNXI_TWI2_BASE			0x05002800
+#define SUNXI_TWI3_BASE			0x05002C00
+#define SUNXI_SPI0_BASE			0x05010000
+#define SUNXI_SPI1_BASE			0x05011000
+#define SUNXI_GMAC_BASE			0x05020000
+#define SUNXI_USB0_BASE			0x05100000
+#define SUNXI_XHCI_BASE			0x05200000
+#define SUNXI_USB3_BASE			0x05311000
+#define SUNXI_PCIE_BASE			0x05400000
+
+#define SUNXI_HDMI_BASE			0x06000000
+#define SUNXI_TCON_TOP_BASE		0x06510000
+#define SUNXI_TCON_LCD0_BASE		0x06511000
+#define SUNXI_TCON_TV0_BASE		0x06515000
+
+#define SUNXI_RTC_BASE			0x07000000
+#define SUNXI_R_CPUCFG_BASE		0x07000400
+#define SUNXI_PRCM_BASE			0x07010000
+#define SUNXI_R_WDOG_BASE		0x07020400
+#define SUNXI_R_PIO_BASE		0x07022000
+#define SUNXI_R_UART_BASE		0x07080000
+#define SUNXI_R_TWI_BASE		0x07081400
+
+#ifndef __ASSEMBLY__
+void sunxi_board_init(void);
+void sunxi_reset(void);
+int sunxi_get_sid(unsigned int *sid);
+#endif
+
+#endif /* _SUNXI_CPU_SUN9I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
new file mode 100644
index 000000000..9c2d11b59
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2007-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Jerry Wang <wangflord@allwinnertech.com>
+ */
+
+#ifndef _SUNXI_CPU_SUN9I_H
+#define _SUNXI_CPU_SUN9I_H
+
+#define REGS_AHB0_BASE			0x01C00000
+#define REGS_AHB1_BASE			0x00800000
+#define REGS_AHB2_BASE			0x03000000
+#define REGS_APB0_BASE			0x06000000
+#define REGS_APB1_BASE			0x07000000
+#define REGS_RCPUS_BASE			0x08000000
+
+#define SUNXI_SRAM_D_BASE		0x08100000
+
+/* AHB0 Module */
+#define SUNXI_NFC_BASE			(REGS_AHB0_BASE + 0x3000)
+#define SUNXI_TSC_BASE			(REGS_AHB0_BASE + 0x4000)
+
+#define SUNXI_GTBUS_BASE		(REGS_AHB0_BASE + 0x9000)
+/* SID address space starts at 0x01ce000, but e-fuse is at offset 0x200 */
+#define SUNXI_SID_BASE			(REGS_AHB0_BASE + 0xe200)
+
+#define SUNXI_MMC0_BASE			(REGS_AHB0_BASE + 0x0f000)
+#define SUNXI_MMC1_BASE			(REGS_AHB0_BASE + 0x10000)
+#define SUNXI_MMC2_BASE			(REGS_AHB0_BASE + 0x11000)
+#define SUNXI_MMC3_BASE			(REGS_AHB0_BASE + 0x12000)
+#define SUNXI_MMC_COMMON_BASE		(REGS_AHB0_BASE + 0x13000)
+
+#define SUNXI_SPI0_BASE			(REGS_AHB0_BASE + 0x1A000)
+#define SUNXI_SPI1_BASE			(REGS_AHB0_BASE + 0x1B000)
+#define SUNXI_SPI2_BASE			(REGS_AHB0_BASE + 0x1C000)
+#define SUNXI_SPI3_BASE			(REGS_AHB0_BASE + 0x1D000)
+
+#define SUNXI_GIC400_BASE		(REGS_AHB0_BASE + 0x40000)
+#define SUNXI_ARMA9_GIC_BASE		(REGS_AHB0_BASE + 0x41000)
+#define SUNXI_ARMA9_CPUIF_BASE		(REGS_AHB0_BASE + 0x42000)
+
+#define SUNXI_DRAM_COM_BASE		(REGS_AHB0_BASE + 0x62000)
+#define SUNXI_DRAM_CTL0_BASE		(REGS_AHB0_BASE + 0x63000)
+#define SUNXI_DRAM_CTL1_BASE		(REGS_AHB0_BASE + 0x64000)
+#define SUNXI_DRAM_PHY0_BASE		(REGS_AHB0_BASE + 0x65000)
+#define SUNXI_DRAM_PHY1_BASE		(REGS_AHB0_BASE + 0x66000)
+
+/* AHB1 Module */
+#define SUNXI_DMA_BASE			(REGS_AHB1_BASE + 0x002000)
+#define SUNXI_USBOTG_BASE		(REGS_AHB1_BASE + 0x100000)
+#define SUNXI_USBEHCI0_BASE		(REGS_AHB1_BASE + 0x200000)
+#define SUNXI_USBEHCI1_BASE		(REGS_AHB1_BASE + 0x201000)
+#define SUNXI_USBEHCI2_BASE		(REGS_AHB1_BASE + 0x202000)
+
+/* AHB2 Module */
+#define SUNXI_DE_SYS_BASE		(REGS_AHB2_BASE + 0x000000)
+#define SUNXI_DISP_SYS_BASE		(REGS_AHB2_BASE + 0x010000)
+#define SUNXI_DE_FE0_BASE		(REGS_AHB2_BASE + 0x100000)
+#define SUNXI_DE_FE1_BASE		(REGS_AHB2_BASE + 0x140000)
+#define SUNXI_DE_FE2_BASE		(REGS_AHB2_BASE + 0x180000)
+
+#define SUNXI_DE_BE0_BASE		(REGS_AHB2_BASE + 0x200000)
+#define SUNXI_DE_BE1_BASE		(REGS_AHB2_BASE + 0x240000)
+#define SUNXI_DE_BE2_BASE		(REGS_AHB2_BASE + 0x280000)
+
+#define SUNXI_DE_DEU0_BASE		(REGS_AHB2_BASE + 0x300000)
+#define SUNXI_DE_DEU1_BASE		(REGS_AHB2_BASE + 0x340000)
+#define SUNXI_DE_DRC0_BASE		(REGS_AHB2_BASE + 0x400000)
+#define SUNXI_DE_DRC1_BASE		(REGS_AHB2_BASE + 0x440000)
+
+#define SUNXI_LCD0_BASE			(REGS_AHB2_BASE + 0xC00000)
+#define SUNXI_LCD1_BASE			(REGS_AHB2_BASE + 0xC10000)
+#define SUNXI_LCD2_BASE			(REGS_AHB2_BASE + 0xC20000)
+#define SUNXI_MIPI_DSI0_BASE		(REGS_AHB2_BASE + 0xC40000)
+/* Also seen as SUNXI_MIPI_DSI0_DPHY_BASE 0x01ca1000 */
+#define SUNXI_MIPI_DSI0_DPHY_BASE	(REGS_AHB2_BASE + 0xC40100)
+#define SUNXI_HDMI_BASE			(REGS_AHB2_BASE + 0xD00000)
+
+/* APB0 Module */
+#define SUNXI_CCM_BASE			(REGS_APB0_BASE + 0x0000)
+#define SUNXI_CCMMODULE_BASE		(REGS_APB0_BASE + 0x0400)
+#define SUNXI_PIO_BASE			(REGS_APB0_BASE + 0x0800)
+#define SUNXI_TIMER_BASE		(REGS_APB0_BASE + 0x0C00)
+#define SUNXI_PWM_BASE			(REGS_APB0_BASE + 0x1400)
+#define SUNXI_LRADC_BASE		(REGS_APB0_BASE + 0x1800)
+
+/* APB1 Module */
+#define SUNXI_UART0_BASE		(REGS_APB1_BASE + 0x0000)
+#define SUNXI_UART1_BASE		(REGS_APB1_BASE + 0x0400)
+#define SUNXI_UART2_BASE		(REGS_APB1_BASE + 0x0800)
+#define SUNXI_UART3_BASE		(REGS_APB1_BASE + 0x0C00)
+#define SUNXI_UART4_BASE		(REGS_APB1_BASE + 0x1000)
+#define SUNXI_UART5_BASE		(REGS_APB1_BASE + 0x1400)
+#define SUNXI_TWI0_BASE			(REGS_APB1_BASE + 0x2800)
+#define SUNXI_TWI1_BASE			(REGS_APB1_BASE + 0x2C00)
+#define SUNXI_TWI2_BASE			(REGS_APB1_BASE + 0x3000)
+#define SUNXI_TWI3_BASE			(REGS_APB1_BASE + 0x3400)
+#define SUNXI_TWI4_BASE			(REGS_APB1_BASE + 0x3800)
+
+/* RCPUS Module */
+#define SUNXI_PRCM_BASE			(REGS_RCPUS_BASE + 0x1400)
+#define SUNXI_R_UART_BASE		(REGS_RCPUS_BASE + 0x2800)
+#define SUNXI_R_PIO_BASE		(REGS_RCPUS_BASE + 0x2c00)
+#define SUNXI_RSB_BASE			(REGS_RCPUS_BASE + 0x3400)
+
+/* Misc. */
+#define SUNXI_BROM_BASE			0xFFFF0000 /* 32K */
+#define SUNXI_CPU_CFG			(SUNXI_TIMER_BASE + 0x13c)
+
+#ifndef __ASSEMBLY__
+void sunxi_board_init(void);
+void sunxi_reset(void);
+int sunxi_get_sid(unsigned int *sid);
+#endif
+
+#endif /* _SUNXI_CPU_SUN9I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpucfg.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpucfg.h
new file mode 100644
index 000000000..4aaebe0a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/cpucfg.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi A31 CPUCFG register definition.
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com
+ */
+
+#ifndef _SUNXI_CPUCFG_H
+#define _SUNXI_CPUCFG_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#ifndef __ASSEMBLY__
+
+struct __packed sunxi_cpucfg_cpu {
+	u32 rst;		/* base + 0x0 */
+	u32 ctrl;		/* base + 0x4 */
+	u32 status;		/* base + 0x8 */
+	u8 res[0x34];		/* base + 0xc */
+};
+
+struct __packed sunxi_cpucfg_reg {
+	u8 res0[0x40];		/* 0x000 */
+	struct sunxi_cpucfg_cpu cpu[4];		/* 0x040 */
+	u8 res1[0x44];		/* 0x140 */
+	u32 gen_ctrl;		/* 0x184 */
+	u32 l2_status;		/* 0x188 */
+	u8 res2[0x4];		/* 0x18c */
+	u32 event_in;		/* 0x190 */
+	u8 res3[0xc];		/* 0x194 */
+	u32 super_standy_flag;	/* 0x1a0 */
+	u32 priv0;		/* 0x1a4 */
+	u32 priv1;		/* 0x1a8 */
+	u8 res4[0x4];		/* 0x1ac */
+	u32 cpu1_pwr_clamp;	/* 0x1b0 sun7i only */
+	u32 cpu1_pwroff;	/* 0x1b4 sun7i only */
+	u8 res5[0x2c];		/* 0x1b8 */
+	u32 dbg_ctrl1;		/* 0x1e4 */
+	u8 res6[0x18];		/* 0x1e8 */
+	u32 idle_cnt0_low;	/* 0x200 */
+	u32 idle_cnt0_high;	/* 0x204 */
+	u32 idle_cnt0_ctrl;	/* 0x208 */
+	u8 res8[0x4];		/* 0x20c */
+	u32 idle_cnt1_low;	/* 0x210 */
+	u32 idle_cnt1_high;	/* 0x214 */
+	u32 idle_cnt1_ctrl;	/* 0x218 */
+	u8 res9[0x4];		/* 0x21c */
+	u32 idle_cnt2_low;	/* 0x220 */
+	u32 idle_cnt2_high;	/* 0x224 */
+	u32 idle_cnt2_ctrl;	/* 0x228 */
+	u8 res10[0x4];		/* 0x22c */
+	u32 idle_cnt3_low;	/* 0x230 */
+	u32 idle_cnt3_high;	/* 0x234 */
+	u32 idle_cnt3_ctrl;	/* 0x238 */
+	u8 res11[0x4];		/* 0x23c */
+	u32 idle_cnt4_low;	/* 0x240 */
+	u32 idle_cnt4_high;	/* 0x244 */
+	u32 idle_cnt4_ctrl;	/* 0x248 */
+	u8 res12[0x34];		/* 0x24c */
+	u32 cnt64_ctrl;		/* 0x280 */
+	u32 cnt64_low;		/* 0x284 */
+	u32 cnt64_high;		/* 0x288 */
+};
+
+#endif /* __ASSEMBLY__ */
+#endif /* _SUNXI_CPUCFG_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/display.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/display.h
new file mode 100644
index 000000000..525f9cb83
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/display.h
@@ -0,0 +1,352 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi platform display controller register and constant defines
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _SUNXI_DISPLAY_H
+#define _SUNXI_DISPLAY_H
+
+struct sunxi_de_fe_reg {
+	u32 enable;			/* 0x000 */
+	u32 frame_ctrl;			/* 0x004 */
+	u32 bypass;			/* 0x008 */
+	u32 algorithm_sel;		/* 0x00c */
+	u32 line_int_ctrl;		/* 0x010 */
+	u8 res0[0x0c];			/* 0x014 */
+	u32 ch0_addr;			/* 0x020 */
+	u32 ch1_addr;			/* 0x024 */
+	u32 ch2_addr;			/* 0x028 */
+	u32 field_sequence;		/* 0x02c */
+	u32 ch0_offset;			/* 0x030 */
+	u32 ch1_offset;			/* 0x034 */
+	u32 ch2_offset;			/* 0x038 */
+	u8 res1[0x04];			/* 0x03c */
+	u32 ch0_stride;			/* 0x040 */
+	u32 ch1_stride;			/* 0x044 */
+	u32 ch2_stride;			/* 0x048 */
+	u32 input_fmt;			/* 0x04c */
+	u32 ch3_addr;			/* 0x050 */
+	u32 ch4_addr;			/* 0x054 */
+	u32 ch5_addr;			/* 0x058 */
+	u32 output_fmt;			/* 0x05c */
+	u32 int_enable;			/* 0x060 */
+	u32 int_status;			/* 0x064 */
+	u32 status;			/* 0x068 */
+	u8 res2[0x04];			/* 0x06c */
+	u32 csc_coef00;			/* 0x070 */
+	u32 csc_coef01;			/* 0x074 */
+	u32 csc_coef02;			/* 0x078 */
+	u32 csc_coef03;			/* 0x07c */
+	u32 csc_coef10;			/* 0x080 */
+	u32 csc_coef11;			/* 0x084 */
+	u32 csc_coef12;			/* 0x088 */
+	u32 csc_coef13;			/* 0x08c */
+	u32 csc_coef20;			/* 0x090 */
+	u32 csc_coef21;			/* 0x094 */
+	u32 csc_coef22;			/* 0x098 */
+	u32 csc_coef23;			/* 0x09c */
+	u32 deinterlace_ctrl;		/* 0x0a0 */
+	u32 deinterlace_diag;		/* 0x0a4 */
+	u32 deinterlace_tempdiff;	/* 0x0a8 */
+	u32 deinterlace_sawtooth;	/* 0x0ac */
+	u32 deinterlace_spatcomp;	/* 0x0b0 */
+	u32 deinterlace_burstlen;	/* 0x0b4 */
+	u32 deinterlace_preluma;	/* 0x0b8 */
+	u32 deinterlace_tile_addr;	/* 0x0bc */
+	u32 deinterlace_tile_stride;	/* 0x0c0 */
+	u8 res3[0x0c];			/* 0x0c4 */
+	u32 wb_stride_enable;		/* 0x0d0 */
+	u32 ch3_stride;			/* 0x0d4 */
+	u32 ch4_stride;			/* 0x0d8 */
+	u32 ch5_stride;			/* 0x0dc */
+	u32 fe_3d_ctrl;			/* 0x0e0 */
+	u32 fe_3d_ch0_addr;		/* 0x0e4 */
+	u32 fe_3d_ch1_addr;		/* 0x0e8 */
+	u32 fe_3d_ch2_addr;		/* 0x0ec */
+	u32 fe_3d_ch0_offset;		/* 0x0f0 */
+	u32 fe_3d_ch1_offset;		/* 0x0f4 */
+	u32 fe_3d_ch2_offset;		/* 0x0f8 */
+	u8 res4[0x04];			/* 0x0fc */
+	u32 ch0_insize;			/* 0x100 */
+	u32 ch0_outsize;		/* 0x104 */
+	u32 ch0_horzfact;		/* 0x108 */
+	u32 ch0_vertfact;		/* 0x10c */
+	u32 ch0_horzphase;		/* 0x110 */
+	u32 ch0_vertphase0;		/* 0x114 */
+	u32 ch0_vertphase1;		/* 0x118 */
+	u8 res5[0x04];			/* 0x11c */
+	u32 ch0_horztapoffset0;		/* 0x120 */
+	u32 ch0_horztapoffset1;		/* 0x124 */
+	u32 ch0_verttapoffset;		/* 0x128 */
+	u8 res6[0xd4];			/* 0x12c */
+	u32 ch1_insize;			/* 0x200 */
+	u32 ch1_outsize;		/* 0x204 */
+	u32 ch1_horzfact;		/* 0x208 */
+	u32 ch1_vertfact;		/* 0x20c */
+	u32 ch1_horzphase;		/* 0x210 */
+	u32 ch1_vertphase0;		/* 0x214 */
+	u32 ch1_vertphase1;		/* 0x218 */
+	u8 res7[0x04];			/* 0x21c */
+	u32 ch1_horztapoffset0;		/* 0x220 */
+	u32 ch1_horztapoffset1;		/* 0x224 */
+	u32 ch1_verttapoffset;		/* 0x228 */
+	u8 res8[0x1d4];			/* 0x22c */
+	u32 ch0_horzcoef0[32];		/* 0x400 */
+	u32 ch0_horzcoef1[32];		/* 0x480 */
+	u32 ch0_vertcoef[32];		/* 0x500 */
+	u8 res9[0x80];			/* 0x580 */
+	u32 ch1_horzcoef0[32];		/* 0x600 */
+	u32 ch1_horzcoef1[32];		/* 0x680 */
+	u32 ch1_vertcoef[32];		/* 0x700 */
+	u8 res10[0x280];		/* 0x780 */
+	u32 vpp_enable;			/* 0xa00 */
+	u32 vpp_dcti;			/* 0xa04 */
+	u32 vpp_lp1;			/* 0xa08 */
+	u32 vpp_lp2;			/* 0xa0c */
+	u32 vpp_wle;			/* 0xa10 */
+	u32 vpp_ble;			/* 0xa14 */
+};
+
+struct sunxi_de_be_reg {
+	u8 res0[0x800];			/* 0x000 */
+	u32 mode;			/* 0x800 */
+	u32 backcolor;			/* 0x804 */
+	u32 disp_size;			/* 0x808 */
+	u8 res1[0x4];			/* 0x80c */
+	u32 layer0_size;		/* 0x810 */
+	u32 layer1_size;		/* 0x814 */
+	u32 layer2_size;		/* 0x818 */
+	u32 layer3_size;		/* 0x81c */
+	u32 layer0_pos;			/* 0x820 */
+	u32 layer1_pos;			/* 0x824 */
+	u32 layer2_pos;			/* 0x828 */
+	u32 layer3_pos;			/* 0x82c */
+	u8 res2[0x10];			/* 0x830 */
+	u32 layer0_stride;		/* 0x840 */
+	u32 layer1_stride;		/* 0x844 */
+	u32 layer2_stride;		/* 0x848 */
+	u32 layer3_stride;		/* 0x84c */
+	u32 layer0_addr_low32b;		/* 0x850 */
+	u32 layer1_addr_low32b;		/* 0x854 */
+	u32 layer2_addr_low32b;		/* 0x858 */
+	u32 layer3_addr_low32b;		/* 0x85c */
+	u32 layer0_addr_high4b;		/* 0x860 */
+	u32 layer1_addr_high4b;		/* 0x864 */
+	u32 layer2_addr_high4b;		/* 0x868 */
+	u32 layer3_addr_high4b;		/* 0x86c */
+	u32 reg_ctrl;			/* 0x870 */
+	u8 res3[0xc];			/* 0x874 */
+	u32 color_key_max;		/* 0x880 */
+	u32 color_key_min;		/* 0x884 */
+	u32 color_key_config;		/* 0x888 */
+	u8 res4[0x4];			/* 0x88c */
+	u32 layer0_attr0_ctrl;		/* 0x890 */
+	u32 layer1_attr0_ctrl;		/* 0x894 */
+	u32 layer2_attr0_ctrl;		/* 0x898 */
+	u32 layer3_attr0_ctrl;		/* 0x89c */
+	u32 layer0_attr1_ctrl;		/* 0x8a0 */
+	u32 layer1_attr1_ctrl;		/* 0x8a4 */
+	u32 layer2_attr1_ctrl;		/* 0x8a8 */
+	u32 layer3_attr1_ctrl;		/* 0x8ac */
+	u8 res5[0x110];			/* 0x8b0 */
+	u32 output_color_ctrl;		/* 0x9c0 */
+	u8 res6[0xc];			/* 0x9c4 */
+	u32 output_color_coef[12];	/* 0x9d0 */
+};
+
+struct sunxi_hdmi_reg {
+	u32 version_id;			/* 0x000 */
+	u32 ctrl;			/* 0x004 */
+	u32 irq;			/* 0x008 */
+	u32 hpd;			/* 0x00c */
+	u32 video_ctrl;			/* 0x010 */
+	u32 video_size;			/* 0x014 */
+	u32 video_bp;			/* 0x018 */
+	u32 video_fp;			/* 0x01c */
+	u32 video_spw;			/* 0x020 */
+	u32 video_polarity;		/* 0x024 */
+	u8 res0[0x58];			/* 0x028 */
+	u8 avi_info_frame[0x14];	/* 0x080 */
+	u8 res1[0x4c];			/* 0x094 */
+	u32 qcp_packet0;		/* 0x0e0 */
+	u32 qcp_packet1;		/* 0x0e4 */
+	u8 res2[0x118];			/* 0x0e8 */
+	u32 pad_ctrl0;			/* 0x200 */
+	u32 pad_ctrl1;			/* 0x204 */
+	u32 pll_ctrl;			/* 0x208 */
+	u32 pll_dbg0;			/* 0x20c */
+	u32 pll_dbg1;			/* 0x210 */
+	u32 hpd_cec;			/* 0x214 */
+	u8 res3[0x28];			/* 0x218 */
+	u8 vendor_info_frame[0x14];	/* 0x240 */
+	u8 res4[0x9c];			/* 0x254 */
+	u32 pkt_ctrl0;			/* 0x2f0 */
+	u32 pkt_ctrl1;			/* 0x2f4 */
+	u8 res5[0x8];			/* 0x2f8 */
+	u32 unknown;			/* 0x300 */
+	u8 res6[0xc];			/* 0x304 */
+	u32 audio_sample_count;		/* 0x310 */
+	u8 res7[0xec];			/* 0x314 */
+	u32 audio_tx_fifo;		/* 0x400 */
+	u8 res8[0xfc];			/* 0x404 */
+#ifndef CONFIG_MACH_SUN6I
+	u32 ddc_ctrl;			/* 0x500 */
+	u32 ddc_addr;			/* 0x504 */
+	u32 ddc_int_mask;		/* 0x508 */
+	u32 ddc_int_status;		/* 0x50c */
+	u32 ddc_fifo_ctrl;		/* 0x510 */
+	u32 ddc_fifo_status;		/* 0x514 */
+	u32 ddc_fifo_data;		/* 0x518 */
+	u32 ddc_byte_count;		/* 0x51c */
+	u32 ddc_cmnd;			/* 0x520 */
+	u32 ddc_exreg;			/* 0x524 */
+	u32 ddc_clock;			/* 0x528 */
+	u8 res9[0x14];			/* 0x52c */
+	u32 ddc_line_ctrl;		/* 0x540 */
+#else
+	u32 ddc_ctrl;			/* 0x500 */
+	u32 ddc_exreg;			/* 0x504 */
+	u32 ddc_cmnd;			/* 0x508 */
+	u32 ddc_addr;			/* 0x50c */
+	u32 ddc_int_mask;		/* 0x510 */
+	u32 ddc_int_status;		/* 0x514 */
+	u32 ddc_fifo_ctrl;		/* 0x518 */
+	u32 ddc_fifo_status;		/* 0x51c */
+	u32 ddc_clock;			/* 0x520 */
+	u32 ddc_timeout;		/* 0x524 */
+	u8 res9[0x18];			/* 0x528 */
+	u32 ddc_dbg;			/* 0x540 */
+	u8 res10[0x3c];			/* 0x544 */
+	u32 ddc_fifo_data;		/* 0x580 */
+#endif
+};
+
+/*
+ * DE-FE register constants.
+ */
+#define SUNXI_DE_FE_WIDTH(x)			(((x) - 1) << 0)
+#define SUNXI_DE_FE_HEIGHT(y)			(((y) - 1) << 16)
+#define SUNXI_DE_FE_FACTOR_INT(n)		((n) << 16)
+#define SUNXI_DE_FE_ENABLE_EN			(1 << 0)
+#define SUNXI_DE_FE_FRAME_CTRL_REG_RDY		(1 << 0)
+#define SUNXI_DE_FE_FRAME_CTRL_COEF_RDY		(1 << 1)
+#define SUNXI_DE_FE_FRAME_CTRL_FRM_START	(1 << 16)
+#define SUNXI_DE_FE_BYPASS_CSC_BYPASS		(1 << 1)
+#define SUNXI_DE_FE_INPUT_FMT_ARGB8888		0x00000151
+#define SUNXI_DE_FE_OUTPUT_FMT_ARGB8888		0x00000002
+
+/*
+ * DE-BE register constants.
+ */
+#define SUNXI_DE_BE_WIDTH(x)			(((x) - 1) << 0)
+#define SUNXI_DE_BE_HEIGHT(y)			(((y) - 1) << 16)
+#define SUNXI_DE_BE_MODE_ENABLE			(1 << 0)
+#define SUNXI_DE_BE_MODE_START			(1 << 1)
+#define SUNXI_DE_BE_MODE_DEFLICKER_ENABLE	(1 << 4)
+#define SUNXI_DE_BE_MODE_LAYER0_ENABLE		(1 << 8)
+#define SUNXI_DE_BE_MODE_INTERLACE_ENABLE	(1 << 28)
+#define SUNXI_DE_BE_LAYER_STRIDE(x)		((x) << 5)
+#define SUNXI_DE_BE_REG_CTRL_LOAD_REGS		(1 << 0)
+#define SUNXI_DE_BE_LAYER_ATTR0_SRC_FE0		0x00000002
+#define SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888	(0x09 << 8)
+#define SUNXI_DE_BE_OUTPUT_COLOR_CTRL_ENABLE	1
+
+/*
+ * HDMI register constants.
+ */
+#define SUNXI_HDMI_X(x)				(((x) - 1) << 0)
+#define SUNXI_HDMI_Y(y)				(((y) - 1) << 16)
+#define SUNXI_HDMI_CTRL_ENABLE			(1 << 31)
+#define SUNXI_HDMI_IRQ_STATUS_FIFO_UF		(1 << 0)
+#define SUNXI_HDMI_IRQ_STATUS_FIFO_OF		(1 << 1)
+#define SUNXI_HDMI_IRQ_STATUS_BITS		0x73
+#define SUNXI_HDMI_HPD_DETECT			(1 << 0)
+#define SUNXI_HDMI_VIDEO_CTRL_ENABLE		(1 << 31)
+#define SUNXI_HDMI_VIDEO_CTRL_HDMI		(1 << 30)
+#define SUNXI_HDMI_VIDEO_POL_HOR		(1 << 0)
+#define SUNXI_HDMI_VIDEO_POL_VER		(1 << 1)
+#define SUNXI_HDMI_VIDEO_POL_TX_CLK		(0x3e0 << 16)
+#define SUNXI_HDMI_QCP_PACKET0			3
+#define SUNXI_HDMI_QCP_PACKET1			0
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PAD_CTRL0_HDP		0x7e80000f
+#define SUNXI_HDMI_PAD_CTRL0_RUN		0x7e8000ff
+#else
+#define SUNXI_HDMI_PAD_CTRL0_HDP		0xfe800000
+#define SUNXI_HDMI_PAD_CTRL0_RUN		0xfe800000
+#endif
+
+#ifdef CONFIG_MACH_SUN4I
+#define SUNXI_HDMI_PAD_CTRL1			0x00d8c820
+#elif defined CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PAD_CTRL1			0x01ded030
+#else
+#define SUNXI_HDMI_PAD_CTRL1			0x00d8c830
+#endif
+#define SUNXI_HDMI_PAD_CTRL1_HALVE		(1 << 6)
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PLL_CTRL			0xba48a308
+#define SUNXI_HDMI_PLL_CTRL_DIV(n)		(((n) - 1) << 4)
+#else
+#define SUNXI_HDMI_PLL_CTRL			0xfa4ef708
+#define SUNXI_HDMI_PLL_CTRL_DIV(n)		((n) << 4)
+#endif
+#define SUNXI_HDMI_PLL_CTRL_DIV_MASK		(0xf << 4)
+
+#define SUNXI_HDMI_PLL_DBG0_PLL3		(0 << 21)
+#define SUNXI_HDMI_PLL_DBG0_PLL7		(1 << 21)
+
+#define SUNXI_HDMI_PKT_CTRL0			0x00000f21
+#define SUNXI_HDMI_PKT_CTRL1			0x0000000f
+#define SUNXI_HDMI_UNKNOWN_INPUT_SYNC		0x08000000
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HMDI_DDC_CTRL_ENABLE		(1 << 0)
+#define SUNXI_HMDI_DDC_CTRL_SCL_ENABLE		(1 << 4)
+#define SUNXI_HMDI_DDC_CTRL_SDA_ENABLE		(1 << 6)
+#define SUNXI_HMDI_DDC_CTRL_START		(1 << 27)
+#define SUNXI_HMDI_DDC_CTRL_RESET		(1 << 31)
+#else
+#define SUNXI_HMDI_DDC_CTRL_RESET		(1 << 0)
+/* sun4i / sun5i / sun7i do not have a separate line_ctrl reg */
+#define SUNXI_HMDI_DDC_CTRL_SDA_ENABLE		0
+#define SUNXI_HMDI_DDC_CTRL_SCL_ENABLE		0
+#define SUNXI_HMDI_DDC_CTRL_START		(1 << 30)
+#define SUNXI_HMDI_DDC_CTRL_ENABLE		(1 << 31)
+#endif
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HMDI_DDC_ADDR_SLAVE_ADDR		(0xa0 << 0)
+#else
+#define SUNXI_HMDI_DDC_ADDR_SLAVE_ADDR		(0x50 << 0)
+#endif
+#define SUNXI_HMDI_DDC_ADDR_OFFSET(n)		(((n) & 0xff) << 8)
+#define SUNXI_HMDI_DDC_ADDR_EDDC_ADDR		(0x60 << 16)
+#define SUNXI_HMDI_DDC_ADDR_EDDC_SEGMENT(n)	((n) << 24)
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_DDC_FIFO_CTRL_CLEAR		(1 << 15)
+#else
+#define SUNXI_HDMI_DDC_FIFO_CTRL_CLEAR		(1 << 31)
+#endif
+
+#define SUNXI_HDMI_DDC_CMND_EXPLICIT_EDDC_READ	6
+#define SUNXI_HDMI_DDC_CMND_IMPLICIT_EDDC_READ	7
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_DDC_CLOCK			0x61
+#else
+/* N = 5,M=1 Fscl= Ftmds/2/10/2^N/(M+1) */
+#define SUNXI_HDMI_DDC_CLOCK			0x0d
+#endif
+
+#define SUNXI_HMDI_DDC_LINE_CTRL_SCL_ENABLE	(1 << 8)
+#define SUNXI_HMDI_DDC_LINE_CTRL_SDA_ENABLE	(1 << 9)
+
+int sunxi_simplefb_setup(void *blob);
+
+#endif /* _SUNXI_DISPLAY_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/display2.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/display2.h
new file mode 100644
index 000000000..7202d2756
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/display2.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi platform display controller register and constant defines
+ *
+ * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * Based on out of tree Linux DRM driver defines:
+ * Copyright (C) 2016 Jean-Francois Moine <moinejf@free.fr>
+ * Copyright (c) 2016 Allwinnertech Co., Ltd.
+ */
+
+#ifndef _SUNXI_DISPLAY2_H
+#define _SUNXI_DISPLAY2_H
+
+/* internal clock settings */
+struct de_clk {
+	u32 gate_cfg;
+	u32 bus_cfg;
+	u32 rst_cfg;
+	u32 div_cfg;
+	u32 sel_cfg;
+};
+
+/* global control */
+struct de_glb {
+	u32 ctl;
+	u32 status;
+	u32 dbuff;
+	u32 size;
+};
+
+/* alpha blending */
+struct de_bld {
+	u32 fcolor_ctl;
+	struct {
+		u32 fcolor;
+		u32 insize;
+		u32 offset;
+		u32 dum;
+	} attr[4];
+	u32 dum0[15];
+	u32 route;
+	u32 premultiply;
+	u32 bkcolor;
+	u32 output_size;
+	u32 bld_mode[4];
+	u32 dum1[4];
+	u32 ck_ctl;
+	u32 ck_cfg;
+	u32 dum2[2];
+	u32 ck_max[4];
+	u32 dum3[4];
+	u32 ck_min[4];
+	u32 dum4[3];
+	u32 out_ctl;
+};
+
+/* VI channel */
+struct de_vi {
+	struct {
+		u32 attr;
+		u32 size;
+		u32 coord;
+		u32 pitch[3];
+		u32 top_laddr[3];
+		u32 bot_laddr[3];
+	} cfg[4];
+	u32 fcolor[4];
+	u32 top_haddr[3];
+	u32 bot_haddr[3];
+	u32 ovl_size[2];
+	u32 hori[2];
+	u32 vert[2];
+};
+
+struct de_ui {
+	struct {
+		u32 attr;
+		u32 size;
+		u32 coord;
+		u32 pitch;
+		u32 top_laddr;
+		u32 bot_laddr;
+		u32 fcolor;
+		u32 dum;
+	} cfg[4];
+	u32 top_haddr;
+	u32 bot_haddr;
+	u32 ovl_size;
+};
+
+struct de_csc {
+	u32 csc_ctl;
+	u8 res[0xc];
+	u32 coef11;
+	u32 coef12;
+	u32 coef13;
+	u32 coef14;
+	u32 coef21;
+	u32 coef22;
+	u32 coef23;
+	u32 coef24;
+	u32 coef31;
+	u32 coef32;
+	u32 coef33;
+	u32 coef34;
+};
+
+/*
+ * DE register constants.
+ */
+#define SUNXI_DE2_MUX0_BASE			(SUNXI_DE2_BASE + 0x100000)
+#define SUNXI_DE2_MUX1_BASE			(SUNXI_DE2_BASE + 0x200000)
+
+#define SUNXI_DE2_MUX_GLB_REGS			0x00000
+#define SUNXI_DE2_MUX_BLD_REGS			0x01000
+#define SUNXI_DE2_MUX_CHAN_REGS			0x02000
+#define SUNXI_DE2_MUX_CHAN_SZ			0x1000
+#define SUNXI_DE2_MUX_VSU_REGS			0x20000
+#define SUNXI_DE2_MUX_GSU1_REGS			0x30000
+#define SUNXI_DE2_MUX_GSU2_REGS			0x40000
+#define SUNXI_DE2_MUX_GSU3_REGS			0x50000
+#define SUNXI_DE2_MUX_FCE_REGS			0xa0000
+#define SUNXI_DE2_MUX_BWS_REGS			0xa2000
+#define SUNXI_DE2_MUX_LTI_REGS			0xa4000
+#define SUNXI_DE2_MUX_PEAK_REGS			0xa6000
+#define SUNXI_DE2_MUX_ASE_REGS			0xa8000
+#define SUNXI_DE2_MUX_FCC_REGS			0xaa000
+#define SUNXI_DE2_MUX_DCSC_REGS			0xb0000
+
+#define SUNXI_DE2_FORMAT_XRGB_8888		4
+#define SUNXI_DE2_FORMAT_RGB_565		10
+
+#define SUNXI_DE2_MUX_GLB_CTL_EN		(1 << 0)
+#define SUNXI_DE2_UI_CFG_ATTR_EN		(1 << 0)
+#define SUNXI_DE2_UI_CFG_ATTR_FMT(f)		((f & 0xf) << 8)
+
+#define SUNXI_DE2_WH(w, h)			(((h - 1) << 16) | (w - 1))
+
+#endif /* _SUNXI_DISPLAY2_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dma.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dma.h
new file mode 100644
index 000000000..bd4c84f00
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dma.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Roy Spliet <rspliet@ultimaker.com>
+ */
+
+#ifndef _SUNXI_DMA_H
+#define _SUNXI_DMA_H
+
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+#include <asm/arch/dma_sun4i.h>
+#else
+#error "DMA definition not available for this architecture"
+#endif
+
+#endif /* _SUNXI_DMA_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dma_sun4i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dma_sun4i.h
new file mode 100644
index 000000000..309dc4f7c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dma_sun4i.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Roy Spliet <rspliet@ultimaker.com>
+ */
+
+#ifndef _SUNXI_DMA_SUN4I_H
+#define _SUNXI_DMA_SUN4I_H
+
+struct sunxi_dma_cfg
+{
+	u32 ctl;		/* 0x00 Control */
+	u32 src_addr;		/* 0x04 Source address */
+	u32 dst_addr;		/* 0x08 Destination address */
+	u32 bc;			/* 0x0C Byte counter */
+	u32 res0[2];
+	u32 ddma_para;		/* 0x18 extra parameter (dedicated DMA only) */
+	u32 res1;
+};
+
+struct sunxi_dma
+{
+	u32 irq_en;			/* 0x000 IRQ enable */
+	u32 irq_pend;			/* 0x004 IRQ pending */
+	u32 auto_gate;			/* 0x008 auto gating */
+	u32 res0[61];
+	struct sunxi_dma_cfg ndma[8];	/* 0x100 Normal DMA */
+	u32 res1[64];
+	struct sunxi_dma_cfg ddma[8];	/* 0x300 Dedicated DMA */
+};
+
+enum ddma_drq_type {
+	DDMA_DST_DRQ_SRAM = 0,
+	DDMA_SRC_DRQ_SRAM = 0,
+	DDMA_DST_DRQ_SDRAM = 1,
+	DDMA_SRC_DRQ_SDRAM = 1,
+	DDMA_DST_DRQ_PATA = 2,
+	DDMA_SRC_DRQ_PATA = 2,
+	DDMA_DST_DRQ_NAND = 3,
+	DDMA_SRC_DRQ_NAND = 3,
+	DDMA_DST_DRQ_USB0 = 4,
+	DDMA_SRC_DRQ_USB0 = 4,
+	DDMA_DST_DRQ_ETHERNET_MAC_TX = 6,
+	DDMA_SRC_DRQ_ETHERNET_MAC_RX = 7,
+	DDMA_DST_DRQ_SPI1_TX = 8,
+	DDMA_SRC_DRQ_SPI1_RX = 9,
+	DDMA_DST_DRQ_SECURITY_SYS_TX = 10,
+	DDMA_SRC_DRQ_SECURITY_SYS_RX = 11,
+	DDMA_DST_DRQ_TCON0 = 14,
+	DDMA_DST_DRQ_TCON1 = 15,
+	DDMA_DST_DRQ_MSC = 23,
+	DDMA_SRC_DRQ_MSC = 23,
+	DDMA_DST_DRQ_SPI0_TX = 26,
+	DDMA_SRC_DRQ_SPI0_RX = 27,
+	DDMA_DST_DRQ_SPI2_TX = 28,
+	DDMA_SRC_DRQ_SPI2_RX = 29,
+	DDMA_DST_DRQ_SPI3_TX = 30,
+	DDMA_SRC_DRQ_SPI3_RX = 31,
+};
+
+#define SUNXI_DMA_CTL_SRC_DRQ(a)		((a) & 0x1f)
+#define SUNXI_DMA_CTL_MODE_IO			(1 << 5)
+#define SUNXI_DMA_CTL_SRC_DATA_WIDTH_32		(2 << 9)
+#define SUNXI_DMA_CTL_DST_DRQ(a)		(((a) & 0x1f) << 16)
+#define SUNXI_DMA_CTL_DST_DATA_WIDTH_32		(2 << 25)
+#define SUNXI_DMA_CTL_TRIGGER			(1 << 31)
+
+#endif /* _SUNXI_DMA_SUN4I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram.h
new file mode 100644
index 000000000..c3b3e1f51
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Sunxi platform dram register definition.
+ */
+
+#ifndef _SUNXI_DRAM_H
+#define _SUNXI_DRAM_H
+
+#include <asm/io.h>
+#include <linux/types.h>
+
+/* dram regs definition */
+#if defined(CONFIG_MACH_SUN6I)
+#include <asm/arch/dram_sun6i.h>
+#elif defined(CONFIG_MACH_SUN8I_A23)
+#include <asm/arch/dram_sun8i_a23.h>
+#elif defined(CONFIG_MACH_SUN8I_A33)
+#include <asm/arch/dram_sun8i_a33.h>
+#elif defined(CONFIG_MACH_SUN8I_A83T)
+#include <asm/arch/dram_sun8i_a83t.h>
+#elif defined(CONFIG_SUNXI_DRAM_DW)
+#include <asm/arch/dram_sunxi_dw.h>
+#elif defined(CONFIG_MACH_SUN9I)
+#include <asm/arch/dram_sun9i.h>
+#elif defined(CONFIG_MACH_SUN50I_H6)
+#include <asm/arch/dram_sun50i_h6.h>
+#elif defined(CONFIG_MACH_SUN50I_H616)
+#include <asm/arch/dram_sun50i_h616.h>
+#else
+#include <asm/arch/dram_sun4i.h>
+#endif
+
+unsigned long sunxi_dram_init(void);
+void mctl_await_completion(u32 *reg, u32 mask, u32 val);
+bool mctl_mem_matches(u32 offset);
+
+#endif /* _SUNXI_DRAM_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun4i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun4i.h
new file mode 100644
index 000000000..69c6600e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun4i.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Sunxi platform dram register definition.
+ */
+
+#ifndef _SUNXI_DRAM_SUN4I_H
+#define _SUNXI_DRAM_SUN4I_H
+
+struct sunxi_dram_reg {
+	u32 ccr;		/* 0x00 controller configuration register */
+	u32 dcr;		/* 0x04 dram configuration register */
+	u32 iocr;		/* 0x08 i/o configuration register */
+	u32 csr;		/* 0x0c controller status register */
+	u32 drr;		/* 0x10 dram refresh register */
+	u32 tpr0;		/* 0x14 dram timing parameters register 0 */
+	u32 tpr1;		/* 0x18 dram timing parameters register 1 */
+	u32 tpr2;		/* 0x1c dram timing parameters register 2 */
+	u32 gdllcr;		/* 0x20 global dll control register */
+	u8 res0[0x28];
+	u32 rslr0;		/* 0x4c rank system latency register */
+	u32 rslr1;		/* 0x50 rank system latency register */
+	u8 res1[0x8];
+	u32 rdgr0;		/* 0x5c rank dqs gating register */
+	u32 rdgr1;		/* 0x60 rank dqs gating register */
+	u8 res2[0x34];
+	u32 odtcr;		/* 0x98 odt configuration register */
+	u32 dtr0;		/* 0x9c data training register 0 */
+	u32 dtr1;		/* 0xa0 data training register 1 */
+	u32 dtar;		/* 0xa4 data training address register */
+	u32 zqcr0;		/* 0xa8 zq control register 0 */
+	u32 zqcr1;		/* 0xac zq control register 1 */
+	u32 zqsr;		/* 0xb0 zq status register */
+	u32 idcr;		/* 0xb4 initializaton delay configure reg */
+	u8 res3[0x138];
+	u32 mr;			/* 0x1f0 mode register */
+	u32 emr;		/* 0x1f4 extended mode register */
+	u32 emr2;		/* 0x1f8 extended mode register */
+	u32 emr3;		/* 0x1fc extended mode register */
+	u32 dllctr;		/* 0x200 dll control register */
+	u32 dllcr[5];		/* 0x204 dll control register 0(byte 0) */
+	/* 0x208 dll control register 1(byte 1) */
+	/* 0x20c dll control register 2(byte 2) */
+	/* 0x210 dll control register 3(byte 3) */
+	/* 0x214 dll control register 4(byte 4) */
+	u32 dqtr0;		/* 0x218 dq timing register */
+	u32 dqtr1;		/* 0x21c dq timing register */
+	u32 dqtr2;		/* 0x220 dq timing register */
+	u32 dqtr3;		/* 0x224 dq timing register */
+	u32 dqstr;		/* 0x228 dqs timing register */
+	u32 dqsbtr;		/* 0x22c dqsb timing register */
+	u32 mcr;		/* 0x230 mode configure register */
+	u8 res[0x8];
+	u32 ppwrsctl;		/* 0x23c pad power save control */
+	u32 apr;		/* 0x240 arbiter period register */
+	u32 pldtr;		/* 0x244 priority level data threshold reg */
+	u8 res5[0x8];
+	u32 hpcr[32];		/* 0x250 host port configure register */
+	u8 res6[0x10];
+	u32 csel;		/* 0x2e0 controller select register */
+};
+
+struct dram_para {
+	u32 clock;
+	u32 mbus_clock;
+	u32 type;
+	u32 rank_num;
+	u32 density;
+	u32 io_width;
+	u32 bus_width;
+	u32 cas;
+	u32 zq;
+	u32 odt_en;
+	u32 size; /* For compat with dram.c files from u-boot-sunxi, unused */
+	u32 tpr0;
+	u32 tpr1;
+	u32 tpr2;
+	u32 tpr3;
+	u32 tpr4;
+	u32 tpr5;
+	u32 emr1;
+	u32 emr2;
+	u32 emr3;
+	u32 dqs_gating_delay;
+	u32 active_windowing;
+};
+
+#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5)
+#define DRAM_CCR_DQS_GATE (0x1 << 14)
+#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17)
+#define DRAM_CCR_ITM_OFF (0x1 << 28)
+#define DRAM_CCR_DATA_TRAINING (0x1 << 30)
+#define DRAM_CCR_INIT (0x1 << 31)
+
+#define DRAM_MEMORY_TYPE_DDR1 1
+#define DRAM_MEMORY_TYPE_DDR2 2
+#define DRAM_MEMORY_TYPE_DDR3 3
+#define DRAM_MEMORY_TYPE_LPDDR2 4
+#define DRAM_MEMORY_TYPE_LPDDR 5
+#define DRAM_DCR_TYPE (0x1 << 0)
+#define DRAM_DCR_TYPE_DDR2 0x0
+#define DRAM_DCR_TYPE_DDR3 0x1
+#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1)
+#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3)
+#define DRAM_DCR_IO_WIDTH_8BIT 0x0
+#define DRAM_DCR_IO_WIDTH_16BIT 0x1
+#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3)
+#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7)
+#define DRAM_DCR_CHIP_DENSITY_256M 0x0
+#define DRAM_DCR_CHIP_DENSITY_512M 0x1
+#define DRAM_DCR_CHIP_DENSITY_1024M 0x2
+#define DRAM_DCR_CHIP_DENSITY_2048M 0x3
+#define DRAM_DCR_CHIP_DENSITY_4096M 0x4
+#define DRAM_DCR_CHIP_DENSITY_8192M 0x5
+#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6)
+#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7)
+#define DRAM_DCR_BUS_WIDTH_32BIT 0x3
+#define DRAM_DCR_BUS_WIDTH_16BIT 0x1
+#define DRAM_DCR_BUS_WIDTH_8BIT 0x0
+#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10)
+#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3)
+#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12)
+#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13)
+#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3)
+#define DRAM_DCR_MODE_SEQ 0x0
+#define DRAM_DCR_MODE_INTERLEAVE 0x1
+
+#define DRAM_CSR_DTERR  (0x1 << 20)
+#define DRAM_CSR_DTIERR (0x1 << 21)
+#define DRAM_CSR_FAILED (DRAM_CSR_DTERR | DRAM_CSR_DTIERR)
+
+#define DRAM_DRR_TRFC(n) ((n) & 0xff)
+#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8)
+#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24)
+
+#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0)
+#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3)
+#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2)
+#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3)
+#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4)
+#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3)
+#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6)
+#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3)
+#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8)
+#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7)
+#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11)
+#define DRAM_MCR_RESET (0x1 << 12)
+#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13)
+#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3)
+#define DRAM_MCR_DCLK_OUT (0x1 << 16)
+
+#define DRAM_DLLCR_NRESET (0x1 << 30)
+#define DRAM_DLLCR_DISABLE (0x1 << 31)
+
+#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20)
+#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff)
+#define DRAM_ZQCR0_ZCAL (1 << 31) /* Starts ZQ calibration when set to 1 */
+#define DRAM_ZQCR0_ZDEN (1 << 28) /* Uses ZDATA instead of doing calibration */
+
+#define DRAM_ZQSR_ZDONE (1 << 31) /* ZQ calibration completion flag */
+
+#define DRAM_IOCR_ODT_EN ((3 << 30) | (3 << 0))
+
+#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0)
+#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7)
+#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4)
+#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7)
+#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9)
+#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7)
+#define DRAM_MR_POWER_DOWN (0x1 << 12)
+
+#define DRAM_CSEL_MAGIC 0x16237495
+
+unsigned long dramc_init(struct dram_para *para);
+
+#endif /* _SUNXI_DRAM_SUN4I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h
new file mode 100644
index 000000000..be02655cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h
@@ -0,0 +1,336 @@
+/*
+ * H6 dram controller register and constant defines
+ *
+ * (C) Copyright 2017  Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_DRAM_SUN50I_H6_H
+#define _SUNXI_DRAM_SUN50I_H6_H
+
+#include <stdbool.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+enum sunxi_dram_type {
+	SUNXI_DRAM_TYPE_DDR3 = 3,
+	SUNXI_DRAM_TYPE_DDR4,
+	SUNXI_DRAM_TYPE_LPDDR2 = 6,
+	SUNXI_DRAM_TYPE_LPDDR3,
+};
+
+static inline bool sunxi_dram_is_lpddr(int type)
+{
+	return type >= SUNXI_DRAM_TYPE_LPDDR2;
+}
+
+/*
+ * The following information is mainly retrieved by disassembly and some FPGA
+ * test code of sun50iw3 platform.
+ */
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x000 control register */
+	u8 reserved_0x004[4];	/* 0x004 */
+	u32 unk_0x008;		/* 0x008 */
+	u32 tmr;		/* 0x00c timer register */
+	u8 reserved_0x010[4];	/* 0x010 */
+	u32 unk_0x014;		/* 0x014 */
+	u8 reserved_0x018[8];	/* 0x018 */
+	u32 maer0;		/* 0x020 master enable register 0 */
+	u32 maer1;		/* 0x024 master enable register 1 */
+	u32 maer2;		/* 0x028 master enable register 2 */
+	u8 reserved_0x02c[468];	/* 0x02c */
+	u32 bwcr;		/* 0x200 bandwidth control register */
+	u8 reserved_0x204[12];	/* 0x204 */
+	/*
+	 * The last master configured by BSP libdram is at 0x49x, so the
+	 * size of this struct array is set to 41 (0x29) now.
+	 */
+	struct {
+		u32 cfg0;		/* 0x0 */
+		u32 cfg1;		/* 0x4 */
+		u8 reserved_0x8[8];	/* 0x8 */
+	} master[41];		/* 0x210 + index * 0x10 */
+};
+check_member(sunxi_mctl_com_reg, master[40].reserved_0x8, 0x498);
+
+/*
+ * The following register information are retrieved from some similar DRAM
+ * controllers, including the DRAM controllers in Allwinner A23/A80 SoCs,
+ * Rockchip RK3328 SoC, NXP i.MX7 SoCs and Xilinx Zynq UltraScale+ SoCs.
+ *
+ * The DRAM controller in Allwinner A23/A80 SoCs and NXP i.MX7 SoCs seems
+ * to be older than the one in Allwinner H6, as the DRAMTMG9 register
+ * is missing in these SoCs. (From the product specifications of these
+ * SoCs they're not capable of DDR4)
+ *
+ * Information sources:
+ * - dram_sun9i.h and dram_sun8i_a23.h in the same directory.
+ * - sdram_rk3328.h from the RK3328 TPL DRAM patchset
+ * - i.MX 7Solo Applications Processor Reference Manual (IMX7SRM)
+ * - Zynq UltraScale+ MPSoC Register Reference (UG1087)
+ */
+struct sunxi_mctl_ctl_reg {
+	u32 mstr;		/* 0x000 */
+	u32 statr;		/* 0x004 unused */
+	u32 mstr1;		/* 0x008 unused */
+	u32 unk_0x00c;		/* 0x00c */
+	u32 mrctrl0;		/* 0x010 unused */
+	u32 mrctrl1;		/* 0x014 unused */
+	u32 mrstatr;		/* 0x018 unused */
+	u32 mrctrl2;		/* 0x01c unused */
+	u32 derateen;		/* 0x020 unused */
+	u32 derateint;		/* 0x024 unused */
+	u8 reserved_0x028[8];	/* 0x028 */
+	u32 pwrctl;		/* 0x030 unused */
+	u32 pwrtmg;		/* 0x034 unused */
+	u32 hwlpctl;		/* 0x038 unused */
+	u8 reserved_0x03c[20];	/* 0x03c */
+	u32 rfshctl0;		/* 0x050 unused */
+	u32 rfshctl1;		/* 0x054 unused */
+	u8 reserved_0x058[8];	/* 0x05c */
+	u32 rfshctl3;		/* 0x060 */
+	u32 rfshtmg;		/* 0x064 */
+	u8 reserved_0x068[104];	/* 0x068 reserved for ECC&CRC (from ZynqMP) */
+	u32 init[8];		/* 0x0d0 */
+	u32 dimmctl;		/* 0x0f0 unused */
+	u32 rankctl;		/* 0x0f4 */
+	u8 reserved_0x0f8[8];	/* 0x0f8 */
+	u32 dramtmg[17];	/* 0x100 */
+	u8 reserved_0x144[60];	/* 0x144 */
+	u32 zqctl[3];		/* 0x180 */
+	u32 zqstat;		/* 0x18c unused */
+	u32 dfitmg0;		/* 0x190 */
+	u32 dfitmg1;		/* 0x194 */
+	u32 dfilpcfg[2];	/* 0x198 unused */
+	u32 dfiupd[3];		/* 0x1a0 */
+	u32 reserved_0x1ac;	/* 0x1ac */
+	u32 dfimisc;		/* 0x1b0 */
+	u32 dfitmg2;		/* 0x1b4 unused, may not exist */
+	u8 reserved_0x1b8[8];	/* 0x1b8 */
+	u32 dbictl;		/* 0x1c0 */
+	u8 reserved_0x1c4[60];	/* 0x1c4 */
+	u32 addrmap[12];	/* 0x200 */
+	u8 reserved_0x230[16];	/* 0x230 */
+	u32 odtcfg;		/* 0x240 */
+	u32 odtmap;		/* 0x244 */
+	u8 reserved_0x248[8];	/* 0x248 */
+	u32 sched[2];		/* 0x250 */
+	u8 reserved_0x258[180];	/* 0x258 */
+	u32 dbgcmd;		/* 0x30c unused */
+	u32 dbgstat;		/* 0x310 unused */
+	u8 reserved_0x314[12];	/* 0x314 */
+	u32 swctl;		/* 0x320 */
+	u32 swstat;		/* 0x324 */
+};
+check_member(sunxi_mctl_ctl_reg, swstat, 0x324);
+
+#define MSTR_DEVICETYPE_DDR3	BIT(0)
+#define MSTR_DEVICETYPE_LPDDR2	BIT(2)
+#define MSTR_DEVICETYPE_LPDDR3	BIT(3)
+#define MSTR_DEVICETYPE_DDR4	BIT(4)
+#define MSTR_DEVICETYPE_MASK	GENMASK(5, 0)
+#define MSTR_2TMODE		BIT(10)
+#define MSTR_BUSWIDTH_FULL	(0 << 12)
+#define MSTR_BUSWIDTH_HALF	(1 << 12)
+#define MSTR_ACTIVE_RANKS(x)	(((x == 2) ? 3 : 1) << 24)
+#define MSTR_BURST_LENGTH(x)	(((x) >> 1) << 16)
+
+/*
+ * The following register information is based on Zynq UltraScale+
+ * MPSoC Register Reference, as it's the currently only known
+ * DDR PHY similar to the one used in H6; however although the
+ * map is similar, the bit fields definitions are different.
+ *
+ * Other DesignWare DDR PHY's have similar register names, but the
+ * offset and definitions are both different.
+ */
+struct sunxi_mctl_phy_reg {
+	u32 ver;		/* 0x000 guess based on similar PHYs */
+	u32 pir;		/* 0x004 */
+	u8 reserved_0x008[8];	/* 0x008 */
+	/*
+	 * The ZynqMP manual didn't document PGCR1, however this register
+	 * exists on H6 and referenced by libdram.
+	 */
+	u32 pgcr[8];		/* 0x010 */
+	/*
+	 * By comparing the hardware and the ZynqMP manual, the PGSR seems
+	 * to start at 0x34 on H6.
+	 */
+	u8 reserved_0x030[4];	/* 0x030 */
+	u32 pgsr[3];		/* 0x034 */
+	u32 ptr[7];		/* 0x040 */
+	/*
+	 * According to ZynqMP reference there's PLLCR0~6 in this area,
+	 * but they're tagged "Type B PLL Only" and H6 seems to have
+	 * no them.
+	 * 0x080 is not present in ZynqMP reference but it seems to be
+	 * present on H6.
+	 */
+	u8 reserved_0x05c[36];	/* 0x05c */
+	u32 unk_0x080;		/* 0x080 */
+	u8 reserved_0x084[4];	/* 0x084 */
+	u32 dxccr;		/* 0x088 */
+	u8 reserved_0x08c[4];	/* 0x08c */
+	u32 dsgcr;		/* 0x090 */
+	u8 reserved_0x094[4];	/* 0x094 */
+	u32 odtcr;		/* 0x098 */
+	u8 reserved_0x09c[4];	/* 0x09c */
+	u32 aacr;		/* 0x0a0 */
+	u8 reserved_0x0a4[32];	/* 0x0a4 */
+	u32 gpr1;		/* 0x0c4 */
+	u8 reserved_0x0c8[56];	/* 0x0c8 */
+	u32 dcr;		/* 0x100 */
+	u8 reserved_0x104[12];	/* 0x104 */
+	u32 dtpr[7];		/* 0x110 */
+	u8 reserved_0x12c[20];	/* 0x12c */
+	u32 rdimmgcr[3];	/* 0x140 */
+	u8 reserved_0x14c[4];	/* 0x14c */
+	u32 rdimmcr[5];		/* 0x150 */
+	u8 reserved_0x164[4];	/* 0x164 */
+	u32 schcr[2];		/* 0x168 */
+	u8 reserved_0x170[16];	/* 0x170 */
+	/*
+	 * The ZynqMP manual documents MR0~7, 11~14 and 22.
+	 */
+	u32 mr[23];		/* 0x180 */
+	u8 reserved_0x1dc[36];	/* 0x1dc */
+	u32 dtcr[2];		/* 0x200 */
+	u32 dtar[3];		/* 0x208 */
+	u8 reserved_0x214[4];	/* 0x214 */
+	u32 dtdr[2];		/* 0x218 */
+	u8 reserved_0x220[16];	/* 0x220 */
+	u32 dtedr0;		/* 0x230 */
+	u32 dtedr1;		/* 0x234 */
+	u32 dtedr2;		/* 0x238 */
+	u32 vtdr;		/* 0x23c */
+	u32 catr[2];		/* 0x240 */
+	u8 reserved_0x248[8];
+	u32 dqsdr[3];		/* 0x250 */
+	u32 dtedr3;		/* 0x25c */
+	u8 reserved_0x260[160];	/* 0x260 */
+	u32 dcuar;		/* 0x300 */
+	u32 dcudr;		/* 0x304 */
+	u32 dcurr;		/* 0x308 */
+	u32 dculr;		/* 0x30c */
+	u32 dcugcr;		/* 0x310 */
+	u32 dcutpr;		/* 0x314 */
+	u32 dcusr[2];		/* 0x318 */
+	u8 reserved_0x320[444];	/* 0x320 */
+	u32 rankidr;		/* 0x4dc */
+	u32 riocr[6];		/* 0x4e0 */
+	u8 reserved_0x4f8[8];	/* 0x4f8 */
+	u32 aciocr[6];		/* 0x500 */
+	u8 reserved_0x518[8];	/* 0x518 */
+	u32 iovcr[2];		/* 0x520 */
+	u32 vtcr[2];		/* 0x528 */
+	u8 reserved_0x530[16];	/* 0x530 */
+	u32 acbdlr[17];		/* 0x540 */
+	u32 aclcdlr;		/* 0x584 */
+	u8 reserved_0x588[24];	/* 0x588 */
+	u32 acmdlr[2];		/* 0x5a0 */
+	u8 reserved_0x5a8[216];	/* 0x5a8 */
+	struct {
+		u32 zqcr;	/* 0x00 only the first one valid */
+		u32 zqpr[2];	/* 0x04 */
+		u32 zqdr[2];	/* 0x0c */
+		u32 zqor[2];	/* 0x14 */
+		u32 zqsr;	/* 0x1c */
+	} zq[2];		/* 0x680, 0x6a0 */
+	u8 reserved_0x6c0[64];	/* 0x6c0 */
+	struct {
+		u32 gcr[7];		/* 0x00 */
+		u8 reserved_0x1c[36];	/* 0x1c */
+		u32 bdlr0;		/* 0x40 */
+		u32 bdlr1;		/* 0x44 */
+		u32 bdlr2;		/* 0x48 */
+		u8 reserved_0x4c[4];	/* 0x4c */
+		u32 bdlr3;		/* 0x50 */
+		u32 bdlr4;		/* 0x54 */
+		u32 bdlr5;		/* 0x58 */
+		u8 reserved_0x5c[4];	/* 0x5c */
+		u32 bdlr6;		/* 0x60 */
+		u8 reserved_0x64[28];	/* 0x64 */
+		u32 lcdlr[6];		/* 0x80 */
+		u8 reserved_0x98[8];	/* 0x98 */
+		u32 mdlr[2];		/* 0xa0 */
+		u8 reserved_0xa8[24];	/* 0xa8 */
+		u32 gtr0;		/* 0xc0 */
+		u8 reserved_0xc4[12];	/* 0xc4 */
+		/*
+		 * DXnRSR0 is not documented in ZynqMP manual but
+		 * it's used in libdram.
+		 */
+		u32 rsr[4];		/* 0xd0 */
+		u32 gsr[4];		/* 0xe0 */
+		u8 reserved_0xf0[16];	/* 0xf0 */
+	} dx[4];		/* 0x700, 0x800, 0x900, 0xa00 */
+};
+check_member(sunxi_mctl_phy_reg, dx[3].reserved_0xf0, 0xaf0);
+
+#define PIR_INIT	BIT(0)
+#define PIR_ZCAL	BIT(1)
+#define PIR_CA		BIT(2)
+#define PIR_PLLINIT	BIT(4)
+#define PIR_DCAL	BIT(5)
+#define PIR_PHYRST	BIT(6)
+#define PIR_DRAMRST	BIT(7)
+#define PIR_DRAMINIT	BIT(8)
+#define PIR_WL		BIT(9)
+#define PIR_QSGATE	BIT(10)
+#define PIR_WLADJ	BIT(11)
+#define PIR_RDDSKW	BIT(12)
+#define PIR_WRDSKW	BIT(13)
+#define PIR_RDEYE	BIT(14)
+#define PIR_WREYE	BIT(15)
+#define PIR_VREF	BIT(17)
+#define PIR_CTLDINIT	BIT(18)
+#define PIR_DQS2DQ	BIT(20)
+#define PIR_DCALPSE	BIT(29)
+#define PIR_ZCALBYP	BIT(30)
+
+#define DCR_LPDDR3	(1 << 0)
+#define DCR_DDR3	(3 << 0)
+#define DCR_DDR4	(4 << 0)
+#define DCR_DDR8BANK	BIT(3)
+#define DCR_DDR2T	BIT(28)
+
+/*
+ * The delay parameters allow to allegedly specify delay times of some
+ * unknown unit for each individual bit trace in each of the four data bytes
+ * the 32-bit wide access consists of. Also three control signals can be
+ * adjusted individually.
+ */
+#define NR_OF_BYTE_LANES	(32 / BITS_PER_BYTE)
+/* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable and DQSN */
+#define WR_LINES_PER_BYTE_LANE	(BITS_PER_BYTE + 4)
+/*
+ * The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable, DQSN,
+ * Termination and Power down
+ */
+#define RD_LINES_PER_BYTE_LANE	(BITS_PER_BYTE + 6)
+struct dram_para {
+	u32 clk;
+	enum sunxi_dram_type type;
+	u8 cols;
+	u8 rows;
+	u8 ranks;
+	u8 bus_full_width;
+	const u8 dx_read_delays[NR_OF_BYTE_LANES][RD_LINES_PER_BYTE_LANE];
+	const u8 dx_write_delays[NR_OF_BYTE_LANES][WR_LINES_PER_BYTE_LANE];
+};
+
+
+static inline int ns_to_t(int nanoseconds)
+{
+	const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2;
+
+	return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000);
+}
+
+void mctl_set_timing_params(struct dram_para *para);
+
+#endif /* _SUNXI_DRAM_SUN50I_H6_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
new file mode 100644
index 000000000..134679d55
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
@@ -0,0 +1,159 @@
+/*
+ * H616 dram controller register and constant defines
+ *
+ * (C) Copyright 2020  Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * Based on H6 one, which is:
+ * (C) Copyright 2017  Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_DRAM_SUN50I_H616_H
+#define _SUNXI_DRAM_SUN50I_H616_H
+
+#include <stdbool.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+enum sunxi_dram_type {
+	SUNXI_DRAM_TYPE_DDR3 = 3,
+	SUNXI_DRAM_TYPE_DDR4,
+	SUNXI_DRAM_TYPE_LPDDR3 = 7,
+	SUNXI_DRAM_TYPE_LPDDR4
+};
+
+/* MBUS part is largely the same as in H6, except for one special register */
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x000 control register */
+	u8 reserved_0x004[4];	/* 0x004 */
+	u32 unk_0x008;		/* 0x008 */
+	u32 tmr;		/* 0x00c timer register */
+	u8 reserved_0x010[4];	/* 0x010 */
+	u32 unk_0x014;		/* 0x014 */
+	u8 reserved_0x018[8];	/* 0x018 */
+	u32 maer0;		/* 0x020 master enable register 0 */
+	u32 maer1;		/* 0x024 master enable register 1 */
+	u32 maer2;		/* 0x028 master enable register 2 */
+	u8 reserved_0x02c[468];	/* 0x02c */
+	u32 bwcr;		/* 0x200 bandwidth control register */
+	u8 reserved_0x204[12];	/* 0x204 */
+	/*
+	 * The last master configured by BSP libdram is at 0x49x, so the
+	 * size of this struct array is set to 41 (0x29) now.
+	 */
+	struct {
+		u32 cfg0;		/* 0x0 */
+		u32 cfg1;		/* 0x4 */
+		u8 reserved_0x8[8];	/* 0x8 */
+	} master[41];		/* 0x210 + index * 0x10 */
+	u8 reserved_0x4a0[96];	/* 0x4a0 */
+	u32 unk_0x500;		/* 0x500 */
+};
+check_member(sunxi_mctl_com_reg, unk_0x500, 0x500);
+
+/*
+ * Controller registers seems to be the same or at least very similar
+ * to those in H6.
+ */
+struct sunxi_mctl_ctl_reg {
+	u32 mstr;		/* 0x000 */
+	u32 statr;		/* 0x004 unused */
+	u32 mstr1;		/* 0x008 unused */
+	u32 clken;		/* 0x00c */
+	u32 mrctrl0;		/* 0x010 unused */
+	u32 mrctrl1;		/* 0x014 unused */
+	u32 mrstatr;		/* 0x018 unused */
+	u32 mrctrl2;		/* 0x01c unused */
+	u32 derateen;		/* 0x020 unused */
+	u32 derateint;		/* 0x024 unused */
+	u8 reserved_0x028[8];	/* 0x028 */
+	u32 pwrctl;		/* 0x030 unused */
+	u32 pwrtmg;		/* 0x034 unused */
+	u32 hwlpctl;		/* 0x038 unused */
+	u8 reserved_0x03c[20];	/* 0x03c */
+	u32 rfshctl0;		/* 0x050 unused */
+	u32 rfshctl1;		/* 0x054 unused */
+	u8 reserved_0x058[8];	/* 0x05c */
+	u32 rfshctl3;		/* 0x060 */
+	u32 rfshtmg;		/* 0x064 */
+	u8 reserved_0x068[104];	/* 0x068 */
+	u32 init[8];		/* 0x0d0 */
+	u32 dimmctl;		/* 0x0f0 unused */
+	u32 rankctl;		/* 0x0f4 */
+	u8 reserved_0x0f8[8];	/* 0x0f8 */
+	u32 dramtmg[17];	/* 0x100 */
+	u8 reserved_0x144[60];	/* 0x144 */
+	u32 zqctl[3];		/* 0x180 */
+	u32 zqstat;		/* 0x18c unused */
+	u32 dfitmg0;		/* 0x190 */
+	u32 dfitmg1;		/* 0x194 */
+	u32 dfilpcfg[2];	/* 0x198 unused */
+	u32 dfiupd[3];		/* 0x1a0 */
+	u32 reserved_0x1ac;	/* 0x1ac */
+	u32 dfimisc;		/* 0x1b0 */
+	u32 dfitmg2;		/* 0x1b4 unused */
+	u32 dfitmg3;		/* 0x1b8 unused */
+	u32 dfistat;		/* 0x1bc */
+	u32 dbictl;		/* 0x1c0 */
+	u8 reserved_0x1c4[60];	/* 0x1c4 */
+	u32 addrmap[12];	/* 0x200 */
+	u8 reserved_0x230[16];	/* 0x230 */
+	u32 odtcfg;		/* 0x240 */
+	u32 odtmap;		/* 0x244 */
+	u8 reserved_0x248[8];	/* 0x248 */
+	u32 sched[2];		/* 0x250 */
+	u8 reserved_0x258[180];	/* 0x258 */
+	u32 dbgcmd;		/* 0x30c unused */
+	u32 dbgstat;		/* 0x310 unused */
+	u8 reserved_0x314[12];	/* 0x314 */
+	u32 swctl;		/* 0x320 */
+	u32 swstat;		/* 0x324 */
+	u8 reserved_0x328[7768];/* 0x328 */
+	u32 unk_0x2180;		/* 0x2180 */
+	u8 reserved_0x2184[188];/* 0x2184 */
+	u32 unk_0x2240;		/* 0x2240 */
+	u8 reserved_0x2244[3900];/* 0x2244 */
+	u32 unk_0x3180;		/* 0x3180 */
+	u8 reserved_0x3184[188];/* 0x3184 */
+	u32 unk_0x3240;		/* 0x3240 */
+	u8 reserved_0x3244[3900];/* 0x3244 */
+	u32 unk_0x4180;		/* 0x4180 */
+	u8 reserved_0x4184[188];/* 0x4184 */
+	u32 unk_0x4240;		/* 0x4240 */
+};
+check_member(sunxi_mctl_ctl_reg, swstat, 0x324);
+check_member(sunxi_mctl_ctl_reg, unk_0x4240, 0x4240);
+
+#define MSTR_DEVICETYPE_DDR3	BIT(0)
+#define MSTR_DEVICETYPE_LPDDR2	BIT(2)
+#define MSTR_DEVICETYPE_LPDDR3	BIT(3)
+#define MSTR_DEVICETYPE_DDR4	BIT(4)
+#define MSTR_DEVICETYPE_MASK	GENMASK(5, 0)
+#define MSTR_2TMODE		BIT(10)
+#define MSTR_BUSWIDTH_FULL	(0 << 12)
+#define MSTR_BUSWIDTH_HALF	(1 << 12)
+#define MSTR_ACTIVE_RANKS(x)	(((x == 2) ? 3 : 1) << 24)
+#define MSTR_BURST_LENGTH(x)	(((x) >> 1) << 16)
+
+struct dram_para {
+	u32 clk;
+	enum sunxi_dram_type type;
+	u8 cols;
+	u8 rows;
+	u8 ranks;
+	u8 bus_full_width;
+};
+
+
+static inline int ns_to_t(int nanoseconds)
+{
+	const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2;
+
+	return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000);
+}
+
+void mctl_set_timing_params(struct dram_para *para);
+
+#endif /* _SUNXI_DRAM_SUN50I_H616_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun6i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun6i.h
new file mode 100644
index 000000000..b66d58cd7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun6i.h
@@ -0,0 +1,362 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sun6i platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _SUNXI_DRAM_SUN6I_H
+#define _SUNXI_DRAM_SUN6I_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x00 */
+	u32 ccr;		/* 0x04 controller configuration register */
+	u32 dbgcr;		/* 0x08 */
+	u32 dbgcr1;		/* 0x0c */
+	u32 rmcr[8];		/* 0x10 */
+	u32 mmcr[16];		/* 0x30 */
+	u32 mbagcr[6];		/* 0x70 */
+	u32 maer;		/* 0x88 */
+	u8 res0[0x14];		/* 0x8c */
+	u32 mdfscr;		/* 0x100 */
+	u32 mdfsmer;		/* 0x104 */
+	u32 mdfsmrmr;		/* 0x108 */
+	u32 mdfstr0;		/* 0x10c */
+	u32 mdfstr1;		/* 0x110 */
+	u32 mdfstr2;		/* 0x114 */
+	u32 mdfstr3;		/* 0x118 */
+	u32 mdfsgcr;		/* 0x11c */
+	u8 res1[0x1c];		/* 0x120 */
+	u32 mdfsivr;		/* 0x13c */
+	u8 res2[0x0c];		/* 0x140 */
+	u32 mdfstcr;		/* 0x14c */
+};
+
+struct sunxi_mctl_ctl_reg {
+	u8 res0[0x04];		/* 0x00 */
+	u32 sctl;		/* 0x04 */
+	u32 sstat;		/* 0x08 */
+	u8 res1[0x34];		/* 0x0c */
+	u32 mcmd;		/* 0x40 */
+	u8 res2[0x08];		/* 0x44 */
+	u32 cmdstat;		/* 0x4c */
+	u32 cmdstaten;		/* 0x50 */
+	u8 res3[0x0c];		/* 0x54 */
+	u32 mrrcfg0;		/* 0x60 */
+	u32 mrrstat0;		/* 0x64 */
+	u32 mrrstat1;		/* 0x68 */
+	u8 res4[0x10];		/* 0x6c */
+	u32 mcfg1;		/* 0x7c */
+	u32 mcfg;		/* 0x80 */
+	u32 ppcfg;		/* 0x84 */
+	u32 mstat;		/* 0x88 */
+	u32 lp2zqcfg;		/* 0x8c */
+	u8 res5[0x04];		/* 0x90 */
+	u32 dtustat;		/* 0x94 */
+	u32 dtuna;		/* 0x98 */
+	u32 dtune;		/* 0x9c */
+	u32 dtuprd0;		/* 0xa0 */
+	u32 dtuprd1;		/* 0xa4 */
+	u32 dtuprd2;		/* 0xa8 */
+	u32 dtuprd3;		/* 0xac */
+	u32 dtuawdt;		/* 0xb0 */
+	u8 res6[0x0c];		/* 0xb4 */
+	u32 togcnt1u;		/* 0xc0 */
+	u8 res7[0x08];		/* 0xc4 */
+	u32 togcnt100n;		/* 0xcc */
+	u32 trefi;		/* 0xd0 */
+	u32 tmrd;		/* 0xd4 */
+	u32 trfc;		/* 0xd8 */
+	u32 trp;		/* 0xdc */
+	u32 trtw;		/* 0xe0 */
+	u32 tal;		/* 0xe4 */
+	u32 tcl;		/* 0xe8 */
+	u32 tcwl;		/* 0xec */
+	u32 tras;		/* 0xf0 */
+	u32 trc;		/* 0xf4 */
+	u32 trcd;		/* 0xf8 */
+	u32 trrd;		/* 0xfc */
+	u32 trtp;		/* 0x100 */
+	u32 twr;		/* 0x104 */
+	u32 twtr;		/* 0x108 */
+	u32 texsr;		/* 0x10c */
+	u32 txp;		/* 0x110 */
+	u32 txpdll;		/* 0x114 */
+	u32 tzqcs;		/* 0x118 */
+	u32 tzqcsi;		/* 0x11c */
+	u32 tdqs;		/* 0x120 */
+	u32 tcksre;		/* 0x124 */
+	u32 tcksrx;		/* 0x128 */
+	u32 tcke;		/* 0x12c */
+	u32 tmod;		/* 0x130 */
+	u32 trstl;		/* 0x134 */
+	u32 tzqcl;		/* 0x138 */
+	u32 tmrr;		/* 0x13c */
+	u32 tckesr;		/* 0x140 */
+	u32 tdpd;		/* 0x144 */
+	u8 res8[0xb8];		/* 0x148 */
+	u32 dtuwactl;		/* 0x200 */
+	u32 dturactl;		/* 0x204 */
+	u32 dtucfg;		/* 0x208 */
+	u32 dtuectl;		/* 0x20c */
+	u32 dtuwd0;		/* 0x210 */
+	u32 dtuwd1;		/* 0x214 */
+	u32 dtuwd2;		/* 0x218 */
+	u32 dtuwd3;		/* 0x21c */
+	u32 dtuwdm;		/* 0x220 */
+	u32 dturd0;		/* 0x224 */
+	u32 dturd1;		/* 0x228 */
+	u32 dturd2;		/* 0x22c */
+	u32 dturd3;		/* 0x230 */
+	u32 dtulfsrwd;		/* 0x234 */
+	u32 dtulfsrrd;		/* 0x238 */
+	u32 dtueaf;		/* 0x23c */
+	u32 dfitctldly;		/* 0x240 */
+	u32 dfiodtcfg;		/* 0x244 */
+	u32 dfiodtcfg1;		/* 0x248 */
+	u32 dfiodtrmap;		/* 0x24c */
+	u32 dfitphywrd;		/* 0x250 */
+	u32 dfitphywrl;		/* 0x254 */
+	u8 res9[0x08];		/* 0x258 */
+	u32 dfitrdden;		/* 0x260 */
+	u32 dfitphyrdl;		/* 0x264 */
+	u8 res10[0x08];		/* 0x268 */
+	u32 dfitphyupdtype0;	/* 0x270 */
+	u32 dfitphyupdtype1;	/* 0x274 */
+	u32 dfitphyupdtype2;	/* 0x278 */
+	u32 dfitphyupdtype3;	/* 0x27c */
+	u32 dfitctrlupdmin;	/* 0x280 */
+	u32 dfitctrlupdmax;	/* 0x284 */
+	u32 dfitctrlupddly;	/* 0x288 */
+	u8 res11[4];		/* 0x28c */
+	u32 dfiupdcfg;		/* 0x290 */
+	u32 dfitrefmski;	/* 0x294 */
+	u32 dfitcrlupdi;	/* 0x298 */
+	u8 res12[0x10];		/* 0x29c */
+	u32 dfitrcfg0;		/* 0x2ac */
+	u32 dfitrstat0;		/* 0x2b0 */
+	u32 dfitrwrlvlen;	/* 0x2b4 */
+	u32 dfitrrdlvlen;	/* 0x2b8 */
+	u32 dfitrrdlvlgateen;	/* 0x2bc */
+	u8 res13[0x04];		/* 0x2c0 */
+	u32 dfistcfg0;		/* 0x2c4 */
+	u32 dfistcfg1;		/* 0x2c8 */
+	u8 res14[0x04];		/* 0x2cc */
+	u32 dfitdramclken;	/* 0x2d0 */
+	u32 dfitdramclkdis;	/* 0x2d4 */
+	u8 res15[0x18];		/* 0x2d8 */
+	u32 dfilpcfg0;		/* 0x2f0 */
+};
+
+struct sunxi_mctl_phy_reg {
+	u8 res0[0x04];		/* 0x00 */
+	u32 pir;		/* 0x04 */
+	u32 pgcr;		/* 0x08 phy general configuration register */
+	u32 pgsr;		/* 0x0c */
+	u32 dllgcr;		/* 0x10 */
+	u32 acdllcr;		/* 0x14 */
+	u32 ptr0;		/* 0x18 */
+	u32 ptr1;		/* 0x1c */
+	u32 ptr2;		/* 0x20 */
+	u32 aciocr;		/* 0x24 */
+	u32 dxccr;		/* 0x28 DATX8 common configuration register */
+	u32 dsgcr;		/* 0x2c dram system general config register */
+	u32 dcr;		/* 0x30 */
+	u32 dtpr0;		/* 0x34 dram timing parameters register 0 */
+	u32 dtpr1;		/* 0x38 dram timing parameters register 1 */
+	u32 dtpr2;		/* 0x3c dram timing parameters register 2 */
+	u32 mr0;		/* 0x40 mode register 0 */
+	u32 mr1;		/* 0x44 mode register 1 */
+	u32 mr2;		/* 0x48 mode register 2 */
+	u32 mr3;		/* 0x4c mode register 3 */
+	u32 odtcr;		/* 0x50 */
+	u32 dtar;		/* 0x54 data training address register */
+	u32 dtd0;		/* 0x58 */
+	u32 dtd1;		/* 0x5c */
+	u8 res1[0x60];		/* 0x60 */
+	u32 dcuar;		/* 0xc0 */
+	u32 dcudr;		/* 0xc4 */
+	u32 dcurr;		/* 0xc8 */
+	u32 dculr;		/* 0xcc */
+	u32 dcugcr;		/* 0xd0 */
+	u32 dcutpr;		/* 0xd4 */
+	u32 dcusr0;		/* 0xd8 */
+	u32 dcusr1;		/* 0xdc */
+	u8 res2[0x20];		/* 0xe0 */
+	u32 bistrr;		/* 0x100 */
+	u32 bistmskr0;		/* 0x104 */
+	u32 bistmskr1;		/* 0x108 */
+	u32 bistwcr;		/* 0x10c */
+	u32 bistlsr;		/* 0x110 */
+	u32 bistar0;		/* 0x114 */
+	u32 bistar1;		/* 0x118 */
+	u32 bistar2;		/* 0x11c */
+	u32 bistupdr;		/* 0x120 */
+	u32 bistgsr;		/* 0x124 */
+	u32 bistwer;		/* 0x128 */
+	u32 bistber0;		/* 0x12c */
+	u32 bistber1;		/* 0x130 */
+	u32 bistber2;		/* 0x134 */
+	u32 bistwcsr;		/* 0x138 */
+	u32 bistfwr0;		/* 0x13c */
+	u32 bistfwr1;		/* 0x140 */
+	u8 res3[0x3c];		/* 0x144 */
+	u32 zq0cr0;		/* 0x180 zq 0 control register 0 */
+	u32 zq0cr1;		/* 0x184 zq 0 control register 1 */
+	u32 zq0sr0;		/* 0x188 zq 0 status register 0 */
+	u32 zq0sr1;		/* 0x18c zq 0 status register 1 */
+	u8 res4[0x30];		/* 0x190 */
+	u32 dx0gcr;		/* 0x1c0 */
+	u32 dx0gsr0;		/* 0x1c4 */
+	u32 dx0gsr1;		/* 0x1c8 */
+	u32 dx0dllcr;		/* 0x1cc */
+	u32 dx0dqtr;		/* 0x1d0 */
+	u32 dx0dqstr;		/* 0x1d4 */
+	u8 res5[0x28];		/* 0x1d8 */
+	u32 dx1gcr;		/* 0x200 */
+	u32 dx1gsr0;		/* 0x204 */
+	u32 dx1gsr1;		/* 0x208 */
+	u32 dx1dllcr;		/* 0x20c */
+	u32 dx1dqtr;		/* 0x210 */
+	u32 dx1dqstr;		/* 0x214 */
+	u8 res6[0x28];		/* 0x218 */
+	u32 dx2gcr;		/* 0x240 */
+	u32 dx2gsr0;		/* 0x244 */
+	u32 dx2gsr1;		/* 0x248 */
+	u32 dx2dllcr;		/* 0x24c */
+	u32 dx2dqtr;		/* 0x250 */
+	u32 dx2dqstr;		/* 0x254 */
+	u8 res7[0x28];		/* 0x258 */
+	u32 dx3gcr;		/* 0x280 */
+	u32 dx3gsr0;		/* 0x284 */
+	u32 dx3gsr1;		/* 0x288 */
+	u32 dx3dllcr;		/* 0x28c */
+	u32 dx3dqtr;		/* 0x290 */
+	u32 dx3dqstr;		/* 0x294 */
+};
+
+/*
+ * DRAM common (sunxi_mctl_com_reg) register constants.
+ */
+#define MCTL_CR_RANK_MASK		(3 << 0)
+#define MCTL_CR_RANK(x)			(((x) - 1) << 0)
+#define MCTL_CR_BANK_MASK		(3 << 2)
+#define MCTL_CR_BANK(x)			((x) << 2)
+#define MCTL_CR_ROW_MASK		(0xf << 4)
+#define MCTL_CR_ROW(x)			(((x) - 1) << 4)
+#define MCTL_CR_PAGE_SIZE_MASK		(0xf << 8)
+#define MCTL_CR_PAGE_SIZE(x)		((fls(x) - 4) << 8)
+#define MCTL_CR_BUSW_MASK		(3 << 12)
+#define MCTL_CR_BUSW16			(1 << 12)
+#define MCTL_CR_BUSW32			(3 << 12)
+#define MCTL_CR_SEQUENCE		(1 << 15)
+#define MCTL_CR_DDR3			(3 << 16)
+#define MCTL_CR_CHANNEL_MASK		(1 << 19)
+#define MCTL_CR_CHANNEL(x)		(((x) - 1) << 19)
+#define MCTL_CR_UNKNOWN			((1 << 22) | (1 << 20))
+#define MCTL_CCR_CH0_CLK_EN		(1 << 0)
+#define MCTL_CCR_CH1_CLK_EN		(1 << 1)
+#define MCTL_CCR_MASTER_CLK_EN		(1 << 2)
+
+/*
+ * DRAM control (sunxi_mctl_ctl_reg) register constants.
+ * Note that we use constant values for a lot of the timings, this is what
+ * the original boot0 bootloader does.
+ */
+#define MCTL_SCTL_CONFIG		1
+#define MCTL_SCTL_ACCESS		2
+#define MCTL_MCMD_NOP			0x88000000
+#define MCTL_MCMD_BUSY			0x80000000
+#define MCTL_MCFG_DDR3			0x70061
+#define MCTL_TREFI			78
+#define MCTL_TMRD			4
+#define MCTL_TRFC			115
+#define MCTL_TRP			9
+#define MCTL_TPREA			0
+#define MCTL_TRTW			2
+#define MCTL_TAL			0
+#define MCTL_TCL			9
+#define MCTL_TCWL			8
+#define MCTL_TRAS			18
+#define MCTL_TRC			23
+#define MCTL_TRCD			9
+#define MCTL_TRRD			4
+#define MCTL_TRTP			4
+#define MCTL_TWR			8
+#define MCTL_TWTR			4
+#define MCTL_TEXSR			512
+#define MCTL_TXP			4
+#define MCTL_TXPDLL			14
+#define MCTL_TZQCS			64
+#define MCTL_TZQCSI			0
+#define MCTL_TDQS			1
+#define MCTL_TCKSRE			5
+#define MCTL_TCKSRX			5
+#define MCTL_TCKE			4
+#define MCTL_TMOD			12
+#define MCTL_TRSTL			80
+#define MCTL_TZQCL			512
+#define MCTL_TMRR			2
+#define MCTL_TCKESR			5
+#define MCTL_TDPD			0
+#define MCTL_DFITPHYRDL			15
+#define MCTL_DFIUPDCFG_UPD		(1 << 1)
+#define MCTL_DFISTCFG0			5
+
+/*
+ * DRAM phy (sunxi_mctl_phy_reg) register values / constants.
+ */
+#define MCTL_PIR_CLEAR_STATUS		(1 << 28)
+#define MCTL_PIR_STEP1			0xe9
+#define MCTL_PIR_STEP2			0x81
+#define MCTL_PGCR_RANK			(1 << 19)
+#define MCTL_PGCR			0x018c0202
+#define MCTL_PGSR_TRAIN_ERR_MASK	(3 << 5)
+/* constants for both acdllcr as well as dx#dllcr */
+#define MCTL_DLLCR_NRESET		(1 << 30)
+#define MCTL_DLLCR_DISABLE		(1 << 31)
+/* ptr constants these are or-ed together to get the final ptr# values */
+#define MCTL_TITMSRST			10
+#define MCTL_TDLLLOCK			2250
+#define MCTL_TDLLSRST			23
+#define MCTL_TDINIT0			217000
+#define MCTL_TDINIT1			160
+#define MCTL_TDINIT2			87000
+#define MCTL_TDINIT3			433
+/* end ptr constants */
+#define MCTL_ACIOCR_DISABLE		((3 << 18) | (1 << 8) | (1 << 3))
+#define MCTL_DXCCR_DISABLE		((1 << 3) | (1 << 2))
+#define MCTL_DXCCR			0x800
+#define MCTL_DSGCR_ENABLE		(1 << 28)
+#define MCTL_DSGCR			0xf200001b
+#define MCTL_DCR_DDR3			0x0b
+/* dtpr constants these are or-ed together to get the final dtpr# values */
+#define MCTL_TCCD			0
+#define MCTL_TDQSCKMAX			1
+#define MCTL_TDQSCK			1
+#define MCTL_TRTODT			0
+#define MCTL_TFAW			20
+#define MCTL_TAOND			0
+#define MCTL_TDLLK			512
+/* end dtpr constants */
+#define MCTL_MR0			0x1a50
+#define MCTL_MR1			0x4
+#define MCTL_MR2			((MCTL_TCWL - 5) << 3)
+#define MCTL_MR3			0x0
+#define MCTL_DX_GCR_EN			(1 << 0)
+#define MCTL_DX_GCR			0x880
+#define MCTL_DX_GSR0_RANK0_TRAIN_DONE	(1 << 0)
+#define MCTL_DX_GSR0_RANK1_TRAIN_DONE	(1 << 1)
+#define MCTL_DX_GSR0_RANK0_TRAIN_ERR	(1 << 4)
+#define MCTL_DX_GSR0_RANK1_TRAIN_ERR	(1 << 5)
+
+#endif /* _SUNXI_DRAM_SUN6I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a23.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a23.h
new file mode 100644
index 000000000..ca98597f1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a23.h
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sun8i platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * CPL <cplanxy@allwinnertech.com>
+ * Jerry Wang <wangflord@allwinnertech.com>
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _SUNXI_DRAM_SUN8I_H
+#define _SUNXI_DRAM_SUN8I_H
+
+struct dram_para {
+	u32 clock;
+	u32 type;
+	u32 zq;
+	u32 odt_en;
+	s32 odt_correction;
+	u32 para1;
+	u32 para2;
+	u32 mr0;
+	u32 mr1;
+	u32 mr2;
+	u32 mr3;
+	u32 tpr0;
+	u32 tpr1;
+	u32 tpr2;
+	u32 tpr3;
+	u32 tpr4;
+	u32 tpr5;
+	u32 tpr6;
+	u32 tpr7;
+	u32 tpr8;
+	u32 tpr9;
+	u32 tpr10;
+	u32 tpr11;
+	u32 tpr12;
+	u32 tpr13;
+};
+
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x00 */
+	u32 ccr;		/* 0x04 controller configuration register */
+	u32 dbgcr;		/* 0x08 */
+	u8 res0[0x4];		/* 0x0c */
+	u32 mcr0_0;		/* 0x10 */
+	u32 mcr1_0;		/* 0x14 */
+	u32 mcr0_1;		/* 0x18 */
+	u32 mcr1_1;		/* 0x1c */
+	u32 mcr0_2;		/* 0x20 */
+	u32 mcr1_2;		/* 0x24 */
+	u32 mcr0_3;		/* 0x28 */
+	u32 mcr1_3;		/* 0x2c */
+	u32 mcr0_4;		/* 0x30 */
+	u32 mcr1_4;		/* 0x34 */
+	u32 mcr0_5;		/* 0x38 */
+	u32 mcr1_5;		/* 0x3c */
+	u32 mcr0_6;		/* 0x40 */
+	u32 mcr1_6;		/* 0x44 */
+	u32 mcr0_7;		/* 0x48 */
+	u32 mcr1_7;		/* 0x4c */
+	u32 mcr0_8;		/* 0x50 */
+	u32 mcr1_8;		/* 0x54 */
+	u32 mcr0_9;		/* 0x58 */
+	u32 mcr1_9;		/* 0x5c */
+	u32 mcr0_10;		/* 0x60 */
+	u32 mcr1_10;		/* 0x64 */
+	u32 mcr0_11;		/* 0x68 */
+	u32 mcr1_11;		/* 0x6c */
+	u32 mcr0_12;		/* 0x70 */
+	u32 mcr1_12;		/* 0x74 */
+	u32 mcr0_13;		/* 0x78 */
+	u32 mcr1_13;		/* 0x7c */
+	u32 mcr0_14;		/* 0x80 */
+	u32 mcr1_14;		/* 0x84 */
+	u32 mcr0_15;		/* 0x88 */
+	u32 mcr1_15;		/* 0x8c */
+	u32 bwcr;		/* 0x90 */
+	u32 maer;		/* 0x94 */
+	u8 res1[0x4];		/* 0x98 */
+	u32 mcgcr;		/* 0x9c */
+	u32 bwctr;		/* 0xa0 */
+	u8 res2[0x4];		/* 0xa4 */
+	u32 swonr;		/* 0xa8 */
+	u32 swoffr;		/* 0xac */
+};
+
+struct sunxi_mctl_ctl_reg {
+	u32 mstr;		/* 0x00 */
+	u32 statr;		/* 0x04 */
+	u8 res0[0x08];		/* 0x08 */
+	u32 mrctrl0;		/* 0x10 */
+	u32 mrctrl1;		/* 0x14 */
+	u32 mrstatr;		/* 0x18 */
+	u8 res1[0x04];		/* 0x1c */
+	u32 derateen;		/* 0x20 */
+	u32 deratenint;		/* 0x24 */
+	u8 res2[0x08];		/* 0x28 */
+	u32 pwrctl;		/* 0x30 */
+	u32 pwrtmg;		/* 0x34 */
+	u8 res3[0x18];		/* 0x38 */
+	u32 rfshctl0;		/* 0x50 */
+	u32 rfshctl1;		/* 0x54 */
+	u8 res4[0x8];		/* 0x58 */
+	u32 rfshctl3;		/* 0x60 */
+	u32 rfshtmg;		/* 0x64 */
+	u8 res6[0x68];		/* 0x68 */
+	u32 init0;		/* 0xd0 */
+	u32 init1;		/* 0xd4 */
+	u32 init2;		/* 0xd8 */
+	u32 init3;		/* 0xdc */
+	u32 init4;		/* 0xe0 */
+	u32 init5;		/* 0xe4 */
+	u8 res7[0x0c];		/* 0xe8 */
+	u32 rankctl;		/* 0xf4 */
+	u8 res8[0x08];		/* 0xf8 */
+	u32 dramtmg0;		/* 0x100 */
+	u32 dramtmg1;		/* 0x104 */
+	u32 dramtmg2;		/* 0x108 */
+	u32 dramtmg3;		/* 0x10c */
+	u32 dramtmg4;		/* 0x110 */
+	u32 dramtmg5;		/* 0x114 */
+	u32 dramtmg6;		/* 0x118 */
+	u32 dramtmg7;		/* 0x11c */
+	u32 dramtmg8;		/* 0x120 */
+	u8 res9[0x5c];		/* 0x124 */
+	u32 zqctl0;		/* 0x180 */
+	u32 zqctl1;		/* 0x184 */
+	u32 zqctl2;		/* 0x188 */
+	u32 zqstat;		/* 0x18c */
+	u32 pitmg0;		/* 0x190 */
+	u32 pitmg1;		/* 0x194 */
+	u32 plpcfg0;		/* 0x198 */
+	u8 res10[0x04];		/* 0x19c */
+	u32 upd0;		/* 0x1a0 */
+	u32 upd1;		/* 0x1a4 */
+	u32 upd2;		/* 0x1a8 */
+	u32 upd3;		/* 0x1ac */
+	u32 pimisc;		/* 0x1b0 */
+	u8 res11[0x1c];		/* 0x1b4 */
+	u32 trainctl0;		/* 0x1d0 */
+	u32 trainctl1;		/* 0x1d4 */
+	u32 trainctl2;		/* 0x1d8 */
+	u32 trainstat;		/* 0x1dc */
+	u8 res12[0x60];		/* 0x1e0 */
+	u32 odtcfg;		/* 0x240 */
+	u32 odtmap;		/* 0x244 */
+	u8 res13[0x08];		/* 0x248 */
+	u32 sched;		/* 0x250 */
+	u8 res14[0x04];		/* 0x254 */
+	u32 perfshpr0;		/* 0x258 */
+	u32 perfshpr1;		/* 0x25c */
+	u32 perflpr0;		/* 0x260 */
+	u32 perflpr1;		/* 0x264 */
+	u32 perfwr0;		/* 0x268 */
+	u32 perfwr1;		/* 0x26c */
+};
+
+struct sunxi_mctl_phy_reg {
+	u8 res0[0x04];		/* 0x00 */
+	u32 pir;		/* 0x04 */
+	u32 pgcr0;		/* 0x08 phy general configuration register */
+	u32 pgcr1;		/* 0x0c phy general configuration register */
+	u32 pgsr0;		/* 0x10 */
+	u32 pgsr1;		/* 0x14 */
+	u32 dllgcr;		/* 0x18 */
+	u32 ptr0;		/* 0x1c */
+	u32 ptr1;		/* 0x20 */
+	u32 ptr2;		/* 0x24 */
+	u32 ptr3;		/* 0x28 */
+	u32 ptr4;		/* 0x2c */
+	u32 acmdlr;		/* 0x30 */
+	u32 acbdlr;		/* 0x34 */
+	u32 aciocr;		/* 0x38 */
+	u32 dxccr;		/* 0x3c DATX8 common configuration register */
+	u32 dsgcr;		/* 0x40 dram system general config register */
+	u32 dcr;		/* 0x44 */
+	u32 dtpr0;		/* 0x48 dram timing parameters register 0 */
+	u32 dtpr1;		/* 0x4c dram timing parameters register 1 */
+	u32 dtpr2;		/* 0x50 dram timing parameters register 2 */
+	u32 mr0;		/* 0x54 mode register 0 */
+	u32 mr1;		/* 0x58 mode register 1 */
+	u32 mr2;		/* 0x5c mode register 2 */
+	u32 mr3;		/* 0x60 mode register 3 */
+	u32 odtcr;		/* 0x64 */
+	u32 dtcr;		/* 0x68 */
+	u32 dtar0;		/* 0x6c data training address register 0 */
+	u32 dtar1;		/* 0x70 data training address register 1 */
+	u32 dtar2;		/* 0x74 data training address register 2 */
+	u32 dtar3;		/* 0x78 data training address register 3 */
+	u32 dtdr0;		/* 0x7c */
+	u32 dtdr1;		/* 0x80 */
+	u32 dtedr0;		/* 0x84 */
+	u32 dtedr1;		/* 0x88 */
+	u32 pgcr2;		/* 0x8c */
+	u8 res1[0x70];		/* 0x90 */
+	u32 bistrr;		/* 0x100 */
+	u32 bistwcr;		/* 0x104 */
+	u32 bistmskr0;		/* 0x108 */
+	u32 bistmskr1;		/* 0x10c */
+	u32 bistmskr2;		/* 0x110 */
+	u32 bistlsr;		/* 0x114 */
+	u32 bistar0;		/* 0x118 */
+	u32 bistar1;		/* 0x11c */
+	u32 bistar2;		/* 0x120 */
+	u32 bistupdr;		/* 0x124 */
+	u32 bistgsr;		/* 0x128 */
+	u32 bistwer;		/* 0x12c */
+	u32 bistber0;		/* 0x130 */
+	u32 bistber1;		/* 0x134 */
+	u32 bistber2;		/* 0x138 */
+	u32 bistber3;		/* 0x13c */
+	u32 bistwcsr;		/* 0x140 */
+	u32 bistfwr0;		/* 0x144 */
+	u32 bistfwr1;		/* 0x148 */
+	u32 bistfwr2;		/* 0x14c */
+	u8 res2[0x30];		/* 0x150 */
+	u32 zqcr0;		/* 0x180 zq control register 0 */
+	u32 zqcr1;		/* 0x184 zq control register 1 */
+	u32 zqsr0;		/* 0x188 zq status register 0 */
+	u32 zqsr1;		/* 0x18c zq status register 1 */
+	u32 zqcr2;		/* 0x190 zq control register 2 */
+	u8 res3[0x2c];		/* 0x194 */
+	u32 dx0gcr;		/* 0x1c0 */
+	u32 dx0gsr0;		/* 0x1c4 */
+	u32 dx0gsr1;		/* 0x1c8 */
+	u32 dx0bdlr0;		/* 0x1cc */
+	u32 dx0bdlr1;		/* 0x1d0 */
+	u32 dx0bdlr2;		/* 0x1d4 */
+	u32 dx0bdlr3;		/* 0x1d8 */
+	u32 dx0bdlr4;		/* 0x1dc */
+	u32 dx0lcdlr0;		/* 0x1e0 */
+	u32 dx0lcdlr1;		/* 0x1e4 */
+	u32 dx0lcdlr2;		/* 0x1e8 */
+	u32 dx0mdlr;		/* 0x1ec */
+	u32 dx0gtr;		/* 0x1f0 */
+	u32 dx0gsr2;		/* 0x1f4 */
+	u8 res4[0x08];		/* 0x1f8 */
+	u32 dx1gcr;		/* 0x200 */
+	u32 dx1gsr0;		/* 0x204 */
+	u32 dx1gsr1;		/* 0x208 */
+	u32 dx1bdlr0;		/* 0x20c */
+	u32 dx1bdlr1;		/* 0x210 */
+	u32 dx1bdlr2;		/* 0x214 */
+	u32 dx1bdlr3;		/* 0x218 */
+	u32 dx1bdlr4;		/* 0x21c */
+	u32 dx1lcdlr0;		/* 0x220 */
+	u32 dx1lcdlr1;		/* 0x224 */
+	u32 dx1lcdlr2;		/* 0x228 */
+	u32 dx1mdlr;		/* 0x22c */
+	u32 dx1gtr;		/* 0x230 */
+	u32 dx1gsr2;		/* 0x234 */
+};
+
+/*
+ * DRAM common (sunxi_mctl_com_reg) register constants.
+ */
+#define MCTL_CR_ROW_MASK		(0xf << 4)
+#define MCTL_CR_ROW(x)			(((x) - 1) << 4)
+#define MCTL_CR_PAGE_SIZE_MASK		(0xf << 8)
+#define MCTL_CR_PAGE_SIZE(x)		((x) << 8)
+
+#endif /* _SUNXI_DRAM_SUN8I_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a33.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a33.h
new file mode 100644
index 000000000..3f65306cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a33.h
@@ -0,0 +1,182 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sun8i platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015      Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _SUNXI_DRAM_SUN8I_A33_H
+#define _SUNXI_DRAM_SUN8I_A33_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x00 */
+	u32 ccr;		/* 0x04 controller configuration register */
+	u32 dbgcr;		/* 0x08 */
+	u8 res0[0x4];		/* 0x0c */
+	u32 mcr0_0;		/* 0x10 */
+	u32 mcr1_0;		/* 0x14 */
+	u32 mcr0_1;		/* 0x18 */
+	u32 mcr1_1;		/* 0x1c */
+	u32 mcr0_2;		/* 0x20 */
+	u32 mcr1_2;		/* 0x24 */
+	u32 mcr0_3;		/* 0x28 */
+	u32 mcr1_3;		/* 0x2c */
+	u32 mcr0_4;		/* 0x30 */
+	u32 mcr1_4;		/* 0x34 */
+	u32 mcr0_5;		/* 0x38 */
+	u32 mcr1_5;		/* 0x3c */
+	u32 mcr0_6;		/* 0x40 */
+	u32 mcr1_6;		/* 0x44 */
+	u32 mcr0_7;		/* 0x48 */
+	u32 mcr1_7;		/* 0x4c */
+	u32 mcr0_8;		/* 0x50 */
+	u32 mcr1_8;		/* 0x54 */
+	u32 mcr0_9;		/* 0x58 */
+	u32 mcr1_9;		/* 0x5c */
+	u32 mcr0_10;		/* 0x60 */
+	u32 mcr1_10;		/* 0x64 */
+	u32 mcr0_11;		/* 0x68 */
+	u32 mcr1_11;		/* 0x6c */
+	u32 mcr0_12;		/* 0x70 */
+	u32 mcr1_12;		/* 0x74 */
+	u32 mcr0_13;		/* 0x78 */
+	u32 mcr1_13;		/* 0x7c */
+	u32 mcr0_14;		/* 0x80 */
+	u32 mcr1_14;		/* 0x84 */
+	u32 mcr0_15;		/* 0x88 */
+	u32 mcr1_15;		/* 0x8c */
+	u32 bwcr;		/* 0x90 */
+	u32 maer;		/* 0x94 */
+	u32 mapr;		/* 0x98 */
+	u32 mcgcr;		/* 0x9c */
+	u32 bwctr;		/* 0xa0 */
+	u8 res2[0x8];		/* 0xa4 */
+	u32 swoffr;		/* 0xac */
+	u8 res3[0x10];		/* 0xb0 */
+	u32 swonr;		/* 0xc0 */
+	u8 res4[0x3c];		/* 0xc4 */
+	u32 mdfscr;		/* 0x100 */
+	u32 mdfsmer;		/* 0x104 */
+};
+
+struct sunxi_mctl_ctl_reg {
+	u32 pir;		/* 0x00 */
+	u32 pwrctl;		/* 0x04 */
+	u32 mrctrl0;		/* 0x08 */
+	u32 clken;		/* 0x0c */
+	u32 pgsr0;		/* 0x10 */
+	u32 pgsr1;		/* 0x14 */
+	u32 statr;		/* 0x18 */
+	u8 res1[0x14];		/* 0x1c */
+	u32 mr0;		/* 0x30 */
+	u32 mr1;		/* 0x34 */
+	u32 mr2;		/* 0x38 */
+	u32 mr3;		/* 0x3c */
+	u32 pllgcr;		/* 0x40 */
+	u32 ptr0;		/* 0x44 */
+	u32 ptr1;		/* 0x48 */
+	u32 ptr2;		/* 0x4c */
+	u32 ptr3;		/* 0x50 */
+	u32 ptr4;		/* 0x54 */
+	u32 dramtmg0;		/* 0x58 dram timing parameters register 0 */
+	u32 dramtmg1;		/* 0x5c dram timing parameters register 1 */
+	u32 dramtmg2;		/* 0x60 dram timing parameters register 2 */
+	u32 dramtmg3;		/* 0x64 dram timing parameters register 3 */
+	u32 dramtmg4;		/* 0x68 dram timing parameters register 4 */
+	u32 dramtmg5;		/* 0x6c dram timing parameters register 5 */
+	u32 dramtmg6;		/* 0x70 dram timing parameters register 6 */
+	u32 dramtmg7;		/* 0x74 dram timing parameters register 7 */
+	u32 dramtmg8;		/* 0x78 dram timing parameters register 8 */
+	u32 odtcfg;		/* 0x7c */
+	u32 pitmg0;		/* 0x80 */
+	u32 pitmg1;		/* 0x84 */
+	u8 res2[0x4];		/* 0x88 */
+	u32 rfshctl0;		/* 0x8c */
+	u32 rfshtmg;		/* 0x90 */
+	u32 rfshctl1;		/* 0x94 */
+	u32 pwrtmg;		/* 0x98 */
+	u8  res3[0x20];		/* 0x9c */
+	u32 dqsgmr;		/* 0xbc */
+	u32 dtcr;		/* 0xc0 */
+	u32 dtar0;		/* 0xc4 */
+	u32 dtar1;		/* 0xc8 */
+	u32 dtar2;		/* 0xcc */
+	u32 dtar3;		/* 0xd0 */
+	u32 dtdr0;		/* 0xd4 */
+	u32 dtdr1;		/* 0xd8 */
+	u32 dtmr0;		/* 0xdc */
+	u32 dtmr1;		/* 0xe0 */
+	u32 dtbmr;		/* 0xe4 */
+	u32 catr0;		/* 0xe8 */
+	u32 catr1;		/* 0xec */
+	u32 dtedr0;		/* 0xf0 */
+	u32 dtedr1;		/* 0xf4 */
+	u8 res4[0x8];		/* 0xf8 */
+	u32 pgcr0;		/* 0x100 */
+	u32 pgcr1;		/* 0x104 */
+	u32 pgcr2;		/* 0x108 */
+	u8 res5[0x4];		/* 0x10c */
+	u32 iovcr0;		/* 0x110 */
+	u32 iovcr1;		/* 0x114 */
+	u32 dqsdr;		/* 0x118 */
+	u32 dxccr;		/* 0x11c */
+	u32 odtmap;		/* 0x120 */
+	u32 zqctl0;		/* 0x124 */
+	u32 zqctl1;		/* 0x128 */
+	u8 res6[0x14];		/* 0x12c */
+	u32 zqcr0;		/* 0x140 zq control register 0 */
+	u32 zqcr1;		/* 0x144 zq control register 1 */
+	u32 zqcr2;		/* 0x148 zq control register 2 */
+	u32 zqsr0;		/* 0x14c zq status register 0 */
+	u32 zqsr1;		/* 0x150 zq status register 1 */
+	u8 res7[0x6c];		/* 0x154 */
+	u32 sched;		/* 0x1c0 */
+	u32 perfhpr0;		/* 0x1c4 */
+	u32 perfhpr1;		/* 0x1c8 */
+	u32 perflpr0;		/* 0x1cc */
+	u32 perflpr1;		/* 0x1d0 */
+	u32 perfwr0;		/* 0x1d4 */
+	u32 perfwr1;		/* 0x1d8 */
+};
+
+#define DXnGTR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000340 + 0x80 * x)
+#define DXnGCR0(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000344 + 0x80 * x)
+#define DXnGSR0(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000348 + 0x80 * x)
+#define DXnGSR1(x)	(SUNXI_DRAM_CTL0_BASE + 0x0000034c + 0x80 * x)
+#define DXnGSR2(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000350 + 0x80 * x)
+
+/*
+ * DRAM common (sunxi_mctl_com_reg) register constants.
+ */
+#define MCTL_CR_RANK_MASK		(3 << 0)
+#define MCTL_CR_RANK(x)			(((x) - 1) << 0)
+#define MCTL_CR_BANK_MASK		(3 << 2)
+#define MCTL_CR_BANK(x)			((x) << 2)
+#define MCTL_CR_ROW_MASK		(0xf << 4)
+#define MCTL_CR_ROW(x)			(((x) - 1) << 4)
+#define MCTL_CR_PAGE_SIZE_MASK		(0xf << 8)
+#define MCTL_CR_PAGE_SIZE(x)		((fls(x) - 4) << 8)
+#define MCTL_CR_BUSW_MASK		(7 << 12)
+#define MCTL_CR_BUSW8			(0 << 12)
+#define MCTL_CR_BUSW16			(1 << 12)
+#define MCTL_CR_SEQUENCE		(1 << 15)
+#define MCTL_CR_DDR3			(3 << 16)
+#define MCTL_CR_CHANNEL_MASK		(1 << 19)
+#define MCTL_CR_CHANNEL(x)		(((x) - 1) << 19)
+#define MCTL_CR_UNKNOWN			(0x4 << 20)
+#define MCTL_CR_CS1_CONTROL(x)		((x) << 24)
+
+/* DRAM control (sunxi_mctl_ctl_reg) register constants */
+#define MCTL_MR0			0x1c70 /* CL=11, WR=12 */
+#define MCTL_MR1			0x40
+#define MCTL_MR2			0x18 /* CWL=8 */
+#define MCTL_MR3			0x0
+
+#endif /* _SUNXI_DRAM_SUN8I_A33_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h
new file mode 100644
index 000000000..2a8799635
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h
@@ -0,0 +1,211 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sun8i platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015      Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _SUNXI_DRAM_SUN8I_A83T_H
+#define _SUNXI_DRAM_SUN8I_A83T_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x00 */
+	u32 ccr;		/* 0x04 controller configuration register */
+	u32 dbgcr;		/* 0x08 */
+	u8 res0[0x4];		/* 0x0c */
+	u32 mcr0_0;		/* 0x10 */
+	u32 mcr1_0;		/* 0x14 */
+	u32 mcr0_1;		/* 0x18 */
+	u32 mcr1_1;		/* 0x1c */
+	u32 mcr0_2;		/* 0x20 */
+	u32 mcr1_2;		/* 0x24 */
+	u32 mcr0_3;		/* 0x28 */
+	u32 mcr1_3;		/* 0x2c */
+	u32 mcr0_4;		/* 0x30 */
+	u32 mcr1_4;		/* 0x34 */
+	u32 mcr0_5;		/* 0x38 */
+	u32 mcr1_5;		/* 0x3c */
+	u32 mcr0_6;		/* 0x40 */
+	u32 mcr1_6;		/* 0x44 */
+	u32 mcr0_7;		/* 0x48 */
+	u32 mcr1_7;		/* 0x4c */
+	u32 mcr0_8;		/* 0x50 */
+	u32 mcr1_8;		/* 0x54 */
+	u32 mcr0_9;		/* 0x58 */
+	u32 mcr1_9;		/* 0x5c */
+	u32 mcr0_10;		/* 0x60 */
+	u32 mcr1_10;		/* 0x64 */
+	u32 mcr0_11;		/* 0x68 */
+	u32 mcr1_11;		/* 0x6c */
+	u32 mcr0_12;		/* 0x70 */
+	u32 mcr1_12;		/* 0x74 */
+	u32 mcr0_13;		/* 0x78 */
+	u32 mcr1_13;		/* 0x7c */
+	u32 mcr0_14;		/* 0x80 */
+	u32 mcr1_14;		/* 0x84 */
+	u32 mcr0_15;		/* 0x88 */
+	u32 mcr1_15;		/* 0x8c */
+	u32 bwcr;		/* 0x90 */
+	u32 maer;		/* 0x94 */
+	u32 mapr;		/* 0x98 */
+	u32 mcgcr;		/* 0x9c */
+	u32 bwctr;		/* 0xa0 */
+	u8 res2[0x8];		/* 0xa4 */
+	u32 swoffr;		/* 0xac */
+	u8 res3[0x10];		/* 0xb0 */
+	u32 swonr;		/* 0xc0 */
+	u8 res4[0x3c];		/* 0xc4 */
+	u32 mdfscr;		/* 0x100 */
+	u32 mdfsmer;		/* 0x104 */
+};
+
+struct sunxi_mctl_ctl_reg {
+	u32 pir;		/* 0x00 */
+	u32 pwrctl;		/* 0x04 */
+	u32 mrctrl0;		/* 0x08 */
+	u32 clken;		/* 0x0c */
+	u32 pgsr0;		/* 0x10 */
+	u32 pgsr1;		/* 0x14 */
+	u32 statr;		/* 0x18 */
+	u8 res1[0x14];		/* 0x1c */
+	u32 mr0;		/* 0x30 */
+	u32 mr1;		/* 0x34 */
+	u32 mr2;		/* 0x38 */
+	u32 mr3;		/* 0x3c */
+	u32 pllgcr;		/* 0x40 */
+	u32 ptr0;		/* 0x44 */
+	u32 ptr1;		/* 0x48 */
+	u32 ptr2;		/* 0x4c */
+	u32 ptr3;		/* 0x50 */
+	u32 ptr4;		/* 0x54 */
+	u32 dramtmg0;		/* 0x58 dram timing parameters register 0 */
+	u32 dramtmg1;		/* 0x5c dram timing parameters register 1 */
+	u32 dramtmg2;		/* 0x60 dram timing parameters register 2 */
+	u32 dramtmg3;		/* 0x64 dram timing parameters register 3 */
+	u32 dramtmg4;		/* 0x68 dram timing parameters register 4 */
+	u32 dramtmg5;		/* 0x6c dram timing parameters register 5 */
+	u32 dramtmg6;		/* 0x70 dram timing parameters register 6 */
+	u32 dramtmg7;		/* 0x74 dram timing parameters register 7 */
+	u32 dramtmg8;		/* 0x78 dram timing parameters register 8 */
+	u32 odtcfg;		/* 0x7c */
+	u32 pitmg0;		/* 0x80 */
+	u32 pitmg1;		/* 0x84 */
+	u8 res2[0x4];		/* 0x88 */
+	u32 rfshctl0;		/* 0x8c */
+	u32 rfshtmg;		/* 0x90 */
+	u32 rfshctl1;		/* 0x94 */
+	u32 pwrtmg;		/* 0x98 */
+	u8  res3[0x20];		/* 0x9c */
+	u32 dqsgmr;		/* 0xbc */
+	u32 dtcr;		/* 0xc0 */
+	u32 dtar0;		/* 0xc4 */
+	u32 dtar1;		/* 0xc8 */
+	u32 dtar2;		/* 0xcc */
+	u32 dtar3;		/* 0xd0 */
+	u32 dtdr0;		/* 0xd4 */
+	u32 dtdr1;		/* 0xd8 */
+	u32 dtmr0;		/* 0xdc */
+	u32 dtmr1;		/* 0xe0 */
+	u32 dtbmr;		/* 0xe4 */
+	u32 catr0;		/* 0xe8 */
+	u32 catr1;		/* 0xec */
+	u32 dtedr0;		/* 0xf0 */
+	u32 dtedr1;		/* 0xf4 */
+	u8 res4[0x8];		/* 0xf8 */
+	u32 pgcr0;		/* 0x100 */
+	u32 pgcr1;		/* 0x104 */
+	u32 pgcr2;		/* 0x108 */
+	u32 pgcr3;		/* 0x10c */
+	u32 iovcr0;		/* 0x110 */
+	u32 iovcr1;		/* 0x114 */
+	u32 dqsdr;		/* 0x118 */
+	u32 dxccr;		/* 0x11c */
+	u32 odtmap;		/* 0x120 */
+	u32 zqctl0;		/* 0x124 */
+	u32 zqctl1;		/* 0x128 */
+	u8 res6[0x14];		/* 0x12c */
+	u32 zqncr;		/* 0x140 zq control register 0 */
+	u32 zqnpr;		/* 0x144 zq control register 1 */
+	u32 zqndr;		/* 0x148 zq control register 2 */
+	u32 zqnsr;		/* 0x14c zq status register 0 */
+	u32 res7;		/* 0x150 zq status register 1 */
+	u8 res8[0x6c];		/* 0x154 */
+	u32 sched;		/* 0x1c0 */
+	u32 perfhpr0;		/* 0x1c4 */
+	u32 perfhpr1;		/* 0x1c8 */
+	u32 perflpr0;		/* 0x1cc */
+	u32 perflpr1;		/* 0x1d0 */
+	u32 perfwr0;		/* 0x1d4 */
+	u32 perfwr1;		/* 0x1d8 */
+};
+
+
+#define ZQnPR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000144 + 0x10 * x)
+#define ZQnDR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000148 + 0x10 * x)
+#define ZQnSR(x)	(SUNXI_DRAM_CTL0_BASE + 0x0000014c + 0x10 * x)
+
+#define DXnGTR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000340 + 0x80 * x)
+#define DXnGCR0(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000344 + 0x80 * x)
+#define DXnGSR0(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000348 + 0x80 * x)
+#define DXnGSR1(x)	(SUNXI_DRAM_CTL0_BASE + 0x0000034c + 0x80 * x)
+#define DXnGSR2(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000350 + 0x80 * x)
+
+#define CAIOCR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000210 + 0x4 * (x))
+#define DXnMDLR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000300 + 0x80 * x)
+#define DXMDLR0		(SUNXI_DRAM_CTL0_BASE + 0x00000300)
+#define DXnLCDLR0(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000304 + 0x80 * x)
+#define DXnLCDLR1(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000308 + 0x80 * x)
+#define DXnLCDLR2(x)	(SUNXI_DRAM_CTL0_BASE + 0x0000030c + 0x80 * x)
+#define DATX0IOCR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000310 + 0x4 * x)
+#define DATX1IOCR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000390 + 0x4 * x)
+#define DATX2IOCR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000410 + 0x4 * x)
+#define DATX3IOCR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000490 + 0x4 * x)
+#define MX_UPD0		(SUNXI_DRAM_CTL0_BASE + 0x00000880)
+#define MX_UPD2		(SUNXI_DRAM_CTL0_BASE + 0x00000888)
+
+#define MCTL_PROTECT		(SUNXI_DRAM_COM_BASE + 0x800)
+#define MCTL_MASTER_CFG0(x)	(SUNXI_DRAM_COM_BASE + 0x10 + 0x8 * x)
+#define MCTL_MASTER_CFG1(x)	(SUNXI_DRAM_COM_BASE + 0x14 + 0x8 * x)
+
+/*
+ * DRAM common (sunxi_mctl_com_reg) register constants.
+ */
+#define MCTL_CR_RANK_MASK		(3 << 0)
+#define MCTL_CR_RANK(x)			(((x) - 1) << 0)
+#define MCTL_CR_BANK_MASK		(3 << 2)
+#define MCTL_CR_BANK(x)			((x) << 2)
+#define MCTL_CR_ROW_MASK		(0xf << 4)
+#define MCTL_CR_ROW(x)			(((x) - 1) << 4)
+#define MCTL_CR_PAGE_SIZE_MASK		(0xf << 8)
+#define MCTL_CR_PAGE_SIZE(x)		((fls(x) - 4) << 8)
+#define MCTL_CR_BUSW_MASK		(7 << 12)
+#define MCTL_CR_BUSW8			(0 << 12)
+#define MCTL_CR_BUSW16			(1 << 12)
+#define MCTL_CR_SEQUENCE		(1 << 15)
+#define MCTL_CR_DRAM_TYPE(x)		((x) << 16)
+#define MCTL_CR_CHANNEL_MASK		(1 << 19)
+#define MCTL_CR_CHANNEL(x)		(((x) - 1) << 19)
+#define MCTL_CR_UNKNOWN			(0x4 << 20)
+#define MCTL_CR_CS1_CONTROL(x)		((x) << 24)
+
+/* DRAM control (sunxi_mctl_ctl_reg) register constants */
+#define MCTL_MR0			0x1c70 /* CL=11, WR=12 */
+#define MCTL_MR1			0x40
+#define MCTL_MR2			0x18 /* CWL=8 */
+#define MCTL_MR3			0x0
+
+#define MCTL_LPDDR3_MR0			0x0
+#define MCTL_LPDDR3_MR1			0xc3	/* twr=8, bl=8 */
+#define MCTL_LPDDR3_MR2			0xa	/* RL=12, CWL=6 */
+#define MCTL_LPDDR3_MR3			0x0
+
+#define DRAM_TYPE_DDR3		3
+#define DRAM_TYPE_LPDDR3	7
+#endif /* _SUNXI_DRAM_SUN8I_A83T_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun9i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun9i.h
new file mode 100644
index 000000000..41df5fe5b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sun9i.h
@@ -0,0 +1,281 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sun8i platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2016  Theobroma Systems Design und Consulting GmbH
+ *                     Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+ */
+
+#ifndef _SUNXI_DRAM_SUN9I_H
+#define _SUNXI_DRAM_SUN9I_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x00 */
+	u32 ccr;		/* 0x04 controller configuration register */
+	u32 dbgcr;		/* 0x08 */
+	u32 dbgcr1;		/* 0x0c */
+	u32 rmcr;		/* 0x10 */
+	u8 res1[0x1c];		/* 0x14 */
+	u32 mmcr;		/* 0x30 */
+	u8 res2[0x3c];		/* 0x34 */
+	u32 mbagcr;		/* 0x70 */
+	u32 mbacr;		/* 0x74 */
+	u8 res3[0x10];		/* 0x78 */
+	u32 maer;		/* 0x88 */
+	u8 res4[0x74];		/* 0x8c */
+	u32 mdfscr;		/* 0x100 */
+	u32 mdfsmer;		/* 0x104 */
+	u32 mdfsmrmr;		/* 0x108 */
+	u32 mdfstr[4];		/* 0x10c */
+	u32 mdfsgcr;		/* 0x11c */
+	u8 res5[0x1c];		/* 0x120 */
+	u32 mdfsivr;		/* 0x13c */
+	u8 res6[0xc];		/* 0x140 */
+	u32 mdfstcr;		/* 0x14c */
+};
+
+
+struct sunxi_mctl_ctl_reg {
+	u32 mstr;		/* 0x00 master register */
+	u32 stat;		/* 0x04 operating mode status register */
+	u8 res1[0x8];		/* 0x08 */
+	u32 mrctrl[2];		/* 0x10 mode register read/write control reg */
+	u32 mstat;		/* 0x18 mode register read/write status reg */
+	u8 res2[0x4];		/* 0x1c */
+	u32 derateen;		/* 0x20 temperature derate enable register */
+	u32 derateint;		/* 0x24 temperature derate interval register */
+	u8 res3[0x8];		/* 0x28 */
+	u32 pwrctl;		/* 0x30 low power control register */
+	u32 pwrtmg;		/* 0x34 low power timing register */
+	u8 res4[0x18];		/* 0x38 */
+	u32 rfshctl0;		/* 0x50 refresh control register 0 */
+	u32 rfshctl1;		/* 0x54 refresh control register 1 */
+	u8 res5[0x8];		/* 0x58 */
+	u32 rfshctl3;		/* 0x60 refresh control register 3 */
+	u32 rfshtmg;		/* 0x64 refresh timing register */
+	u8 res6[0x68];		/* 0x68 */
+	u32 init[6];		/* 0xd0 SDRAM initialisation register */
+	u8 res7[0xc];		/* 0xe8 */
+	u32 rankctl;		/* 0xf4 rank control register */
+	u8 res8[0x8];		/* 0xf8 */
+	u32 dramtmg[9];		/* 0x100 DRAM timing register */
+	u8 res9[0x5c];		/* 0x124 */
+	u32 zqctrl[3];		/* 0x180 ZQ control register */
+	u32 zqstat;		/* 0x18c ZQ status register */
+	u32 dfitmg[2];		/* 0x190 DFI timing register */
+	u32 dfilpcfg;		/* 0x198 DFI low power configuration register */
+	u8 res10[0x4];		/* 0x19c */
+	u32 dfiupd[4];		/* 0x1a0 DFI update register */
+	u32 dfimisc;		/* 0x1b0 DFI miscellaneous control register */
+	u8 res11[0x1c];		/* 0x1b4 */
+	u32 trainctl[3];	/* 0x1d0 */
+	u32 trainstat;	        /* 0x1dc */
+	u8 res12[0x20];		/* 0x1e0 */
+	u32 addrmap[7];	        /* 0x200 address map register */
+	u8 res13[0x24];		/* 0x21c */
+	u32 odtcfg;		/* 0x240 ODT configuration register */
+	u32 odtmap;		/* 0x244 ODT/rank map register */
+	u8 res14[0x8];		/* 0x248 */
+	u32 sched;		/* 0x250 scheduler control register */
+	u8 res15[0x4];		/* 0x254 */
+	u32 perfhpr0;		/* 0x258 high priority read CAM register 0 */
+	u32 perfhpr1;		/* 0x25c high priority read CAM register 1 */
+	u32 perflpr0;		/* 0x260 low priority read CAM register 0 */
+	u32 perflpr1;		/* 0x264 low priority read CAM register 1 */
+	u32 perfwr0;		/* 0x268 write CAM register 0 */
+	u32 perfwr1;		/* 0x26c write CAM register 1 */
+};
+
+
+struct sunxi_mctl_phy_reg {
+	u8 res0[0x04];		/* 0x00 revision id ??? */
+	u32 pir;		/* 0x04 PHY initialisation register */
+	u32 pgcr[4];		/* 0x08 PHY general configuration register */
+	u32 pgsr[2];		/* 0x18 PHY general status register */
+	u32 pllcr;		/* 0x20 PLL control register */
+	u32 ptr[5];		/* 0x24 PHY timing register */
+	u32 acmdlr;		/* 0x38 AC master delay line register */
+	u32 aclcdlr;		/* 0x3c AC local calibrated delay line reg */
+	u32 acbdlr[10];		/* 0x40 AC bit delay line register */
+	u32 aciocr[6];		/* 0x68 AC IO configuration register */
+	u32 dxccr;		/* 0x80 DATX8 common configuration register */
+	u32 dsgcr;		/* 0x84 DRAM system general config register */
+	u32 dcr;		/* 0x88 DRAM configuration register */
+	u32 dtpr[4];		/* 0x8c DRAM timing parameters register */
+	u32 mr0;		/* 0x9c mode register 0 */
+	u32 mr1;		/* 0xa0 mode register 1 */
+	u32 mr2;		/* 0xa4 mode register 2 */
+	u32 mr3;		/* 0xa8 mode register 3 */
+	u32 odtcr;		/* 0xac ODT configuration register */
+	u32 dtcr;		/* 0xb0 data training configuration register */
+	u32 dtar[4];		/* 0xb4 data training address register */
+	u32 dtdr[2];		/* 0xc4 data training data register */
+	u32 dtedr[2];		/* 0xcc data training eye data register */
+	u32 rdimmgcr[2];	/* 0xd4 RDIMM general configuration register */
+	u32 rdimmcr[2];		/* 0xdc RDIMM control register */
+	u32 gpr[2];		/* 0xe4 general purpose register */
+	u32 catr[2];		/* 0xec CA training register */
+	u32 dqdsr;		/* 0xf4 DQS drift register */
+	u8 res1[0xc8];		/* 0xf8 */
+	u32 bistrr;		/* 0x1c0 BIST run register */
+	u32 bistwcr;		/* 0x1c4 BIST word count register */
+	u32 bistmskr[3];	/* 0x1c8 BIST mask register */
+	u32 bistlsr;		/* 0x1d4 BIST LFSR seed register */
+	u32 bistar[3];		/* 0x1d8 BIST address register */
+	u32 bistupdr;		/* 0x1e4 BIST user pattern data register */
+	u32 bistgsr;		/* 0x1e8 BIST general status register */
+	u32 bistwer;		/* 0x1dc BIST word error register */
+	u32 bistber[4];		/* 0x1f0 BIST bit error register */
+	u32 bistwcsr;		/* 0x200 BIST word count status register */
+	u32 bistfwr[3];		/* 0x204 BIST fail word register */
+	u8 res2[0x28];		/* 0x210 */
+	u32 iovcr[2];		/* 0x238 IO VREF control register */
+	struct ddrphy_zq {
+		u32 cr;              /* impedance control register */
+		u32 pr;              /* impedance control data register */
+		u32 dr;              /* impedance control data register */
+		u32 sr;              /* impedance control status register */
+	} zq[4];                /* 0x240, 0x250, 0x260, 0x270 */
+	struct ddrphy_dx {
+		u32 gcr[4];          /* DATX8 general configuration register */
+		u32 gsr[3];          /* DATX8 general status register */
+		u32 bdlr[7];         /* DATX8 bit delay line register */
+		u32 lcdlr[3];        /* DATX8 local calibrated delay line reg */
+		u32 mdlr;            /* DATX8 master delay line register */
+		u32 gtr;             /* DATX8 general timing register */
+		u8 res[0x34];
+	} dx[4];                /* 0x280, 0x300, 0x380, 0x400 */
+};
+
+/*
+ * DRAM common (sunxi_mctl_com_reg) register constants.
+ */
+#define MCTL_CR_RANK_MASK		(3 << 0)
+#define MCTL_CR_RANK(x)			(((x) - 1) << 0)
+#define MCTL_CR_BANK_MASK		(3 << 2)
+#define MCTL_CR_BANK(x)			((x) << 2)
+#define MCTL_CR_ROW_MASK		(0xf << 4)
+#define MCTL_CR_ROW(x)			(((x) - 1) << 4)
+#define MCTL_CR_PAGE_SIZE_MASK		(0xf << 8)
+#define MCTL_CR_PAGE_SIZE(x)		((fls(x) - 4) << 8)
+#define MCTL_CR_BUSW_MASK		(3 << 12)
+#define MCTL_CR_BUSW16			(1 << 12)
+#define MCTL_CR_BUSW32			(3 << 12)
+#define MCTL_CR_DRAMTYPE_MASK           (7 << 16)
+#define MCTL_CR_DRAMTYPE_DDR2		(2 << 16)
+#define MCTL_CR_DRAMTYPE_DDR3		(3 << 16)
+#define MCTL_CR_DRAMTYPE_LPDDR2		(6 << 16)
+
+#define MCTL_CR_CHANNEL_MASK		((1 << 22) | (1 << 20) | (1 << 19))
+#define MCTL_CR_CHANNEL_SINGLE          (1 << 22)
+#define MCTL_CR_CHANNEL_DUAL            ((1 << 22) | (1 << 20) | (1 << 19))
+
+#define MCTL_CCR_CH0_CLK_EN		(1 << 15)
+#define MCTL_CCR_CH1_CLK_EN		(1 << 31)
+
+/*
+ * post_cke_x1024 [bits 16..25]: Cycles to wait after driving CKE high
+ * to start the SDRAM initialization sequence (in 1024s of cycles).
+ */
+#define MCTL_INIT0_POST_CKE_x1024(n)    ((n & 0x0fff) << 16)
+/*
+ * pre_cke_x1024 [bits 0..11] Cycles to wait after reset before driving
+ * CKE high to start the SDRAM initialization (in 1024s of cycles)
+ */
+#define MCTL_INIT0_PRE_CKE_x1024(n)     ((n & 0x0fff) <<  0)
+#define MCTL_INIT1_DRAM_RSTN_x1024(n)   ((n & 0xff) << 16)
+#define MCTL_INIT1_FINAL_WAIT_x32(n)    ((n & 0x3f) <<  8)
+#define MCTL_INIT1_PRE_OCD_x32(n)       ((n & 0x0f) <<  0)
+#define MCTL_INIT2_IDLE_AFTER_RESET_x32(n)  ((n & 0xff) << 8)
+#define MCTL_INIT2_MIN_STABLE_CLOCK_x1(n)   ((n & 0x0f) << 0)
+#define MCTL_INIT3_MR(n)                ((n & 0xffff) << 16)
+#define MCTL_INIT3_EMR(n)               ((n & 0xffff) <<  0)
+#define MCTL_INIT4_EMR2(n)              ((n & 0xffff) << 16)
+#define MCTL_INIT4_EMR3(n)              ((n & 0xffff) <<  0)
+#define MCTL_INIT5_DEV_ZQINIT_x32(n)        ((n & 0x00ff) << 16)
+#define MCTL_INIT5_MAX_AUTO_INIT_x1024(n)   ((n & 0x03ff) <<  0);
+
+#define MCTL_DFIMISC_DFI_INIT_COMPLETE_EN  (1 << 0)
+#define MCTL_DFIUPD0_DIS_AUTO_CTRLUPD      (1 << 31)
+
+#define MCTL_MSTR_DEVICETYPE_DDR3          1
+#define MCTL_MSTR_DEVICETYPE_LPDDR2        4
+#define MCTL_MSTR_DEVICETYPE_LPDDR3        8
+#define MCTL_MSTR_DEVICETYPE(type) \
+	((type == DRAM_TYPE_DDR3) ? MCTL_MSTR_DEVICETYPE_DDR3 : \
+		((type == DRAM_TYPE_LPDDR2) ? MCTL_MSTR_DEVICETYPE_LPDDR2 : \
+					      MCTL_MSTR_DEVICETYPE_LPDDR3))
+#define MCTL_MSTR_BURSTLENGTH4             (2 << 16)
+#define MCTL_MSTR_BURSTLENGTH8             (4 << 16)
+#define MCTL_MSTR_BURSTLENGTH16            (8 << 16)
+#define MCTL_MSTR_BURSTLENGTH(type) \
+	((type == DRAM_TYPE_DDR3) ? MCTL_MSTR_BURSTLENGTH8 : \
+		((type == DRAM_TYPE_LPDDR2) ? MCTL_MSTR_BURSTLENGTH4 : \
+					      MCTL_MSTR_BURSTLENGTH8))
+#define MCTL_MSTR_ACTIVERANKS(x)           (((x == 2) ? 3 : 1) << 24)
+#define MCTL_MSTR_BUSWIDTH8                (2 << 12)
+#define MCTL_MSTR_BUSWIDTH16               (1 << 12)
+#define MCTL_MSTR_BUSWIDTH32               (0 << 12)
+#define MCTL_MSTR_2TMODE                   (1 << 10)
+
+#define MCTL_RFSHCTL3_DIS_AUTO_REFRESH     (1 << 0)
+
+#define MCTL_ZQCTRL0_TZQCS(x)              (x << 0)
+#define MCTL_ZQCTRL0_TZQCL(x)              (x << 16)
+#define MCTL_ZQCTRL0_ZQCL_DIS              (1 << 30)
+#define MCTL_ZQCTRL0_ZQCS_DIS              (1 << 31)
+#define MCTL_ZQCTRL1_TZQRESET(x)           (x << 20)
+#define MCTL_ZQCTRL1_TZQSI_x1024(x)        (x << 0)
+#define MCTL_ZQCTRL2_TZRESET_TRIGGER       (1 << 0)
+
+#define MCTL_PHY_DCR_BYTEMASK              (1 << 10)
+#define MCTL_PHY_DCR_2TMODE                (1 << 28)
+#define MCTL_PHY_DCR_DDR8BNK               (1 << 3)
+#define MCTL_PHY_DRAMMODE_DDR3             3
+#define MCTL_PHY_DRAMMODE_LPDDR2           0
+#define MCTL_PHY_DRAMMODE_LPDDR3           1
+
+#define MCTL_DTCR_DEFAULT                  0x00003007
+#define MCTL_DTCR_RANKEN(n)                (((n == 2) ? 3 : 1) << 24)
+
+#define MCTL_PGCR1_ZCKSEL_MASK             (3 << 23)
+#define MCTL_PGCR1_IODDRM_MASK             (3 << 7)
+#define MCTL_PGCR1_IODDRM_DDR3             (1 << 7)
+#define MCTL_PGCR1_IODDRM_DDR3L            (2 << 7)
+#define MCTL_PGCR1_INHVT_EN                (1 << 26)
+
+#define MCTL_PLLGCR_PLL_BYPASS             (1 << 31)
+#define MCTL_PLLGCR_PLL_POWERDOWN          (1 << 29)
+
+#define MCTL_PIR_PLL_BYPASS                (1 << 17)
+#define MCTL_PIR_MASK                      (~(1 << 17))
+#define MCTL_PIR_INIT                      (1 << 0)
+
+#define MCTL_PGSR0_ERRORS                  (0x1ff << 20)
+
+/* Constants for assembling MR0 */
+#define DDR3_MR0_PPD_FAST_EXIT             (1 << 12)
+#define DDR3_MR0_WR(n) \
+	((n <= 8) ? ((n - 4) << 9) : (((n >> 1) & 0x7) << 9))
+#define DDR3_MR0_CL(n) \
+	((((n - 4) & 0x7) << 4) | (((n - 4) & 0x8) >> 2))
+#define DDR3_MR0_BL8                       (0 << 0)
+
+#define DDR3_MR1_RTT120OHM                 ((0 << 9) | (1 << 6) | (0 << 2))
+
+#define DDR3_MR2_TWL(n) \
+	(((n - 5) & 0x7) << 3)
+
+#define MCTL_NS2CYCLES_CEIL(ns)	((ns * (CONFIG_DRAM_CLK / 2) + 999) / 1000)
+
+#define DRAM_TYPE_DDR3		3
+#define DRAM_TYPE_LPDDR2	6
+#define DRAM_TYPE_LPDDR3	7
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sunxi_dw.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sunxi_dw.h
new file mode 100644
index 000000000..e843c1420
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/dram_sunxi_dw.h
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * sun8i H3 platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015      Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2015      Jens Kuske <jenskuske@gmail.com>
+ */
+
+#ifndef _SUNXI_DRAM_SUN8I_H3_H
+#define _SUNXI_DRAM_SUN8I_H3_H
+
+#include <linux/bitops.h>
+
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x00 control register */
+	u32 cr_r1;		/* 0x04 rank 1 control register (R40 only) */
+	u8 res0[0x4];		/* 0x08 */
+	u32 tmr;		/* 0x0c (unused on H3) */
+	u32 mcr[16][2];		/* 0x10 */
+	u32 bwcr;		/* 0x90 bandwidth control register */
+	u32 maer;		/* 0x94 master enable register */
+	u32 mapr;		/* 0x98 master priority register */
+	u32 mcgcr;		/* 0x9c */
+	u32 cpu_bwcr;		/* 0xa0 */
+	u32 gpu_bwcr;		/* 0xa4 */
+	u32 ve_bwcr;		/* 0xa8 */
+	u32 disp_bwcr;		/* 0xac */
+	u32 other_bwcr;		/* 0xb0 */
+	u32 total_bwcr;		/* 0xb4 */
+	u8 res1[0x8];		/* 0xb8 */
+	u32 swonr;		/* 0xc0 */
+	u32 swoffr;		/* 0xc4 */
+	u8 res2[0x8];		/* 0xc8 */
+	u32 cccr;		/* 0xd0 */
+	u8 res3[0x54];		/* 0xd4 */
+	u32 mdfs_bwlr[3];	/* 0x128 (unused on H3) */
+	u8 res4[0x6cc];		/* 0x134 */
+	u32 protect;		/* 0x800 */
+};
+
+#define MCTL_CR_BL8		(0x4 << 20)
+
+#define MCTL_CR_1T		(0x1 << 19)
+#define MCTL_CR_2T		(0x0 << 19)
+
+#define MCTL_CR_LPDDR3		(0x7 << 16)
+#define MCTL_CR_LPDDR2		(0x6 << 16)
+#define MCTL_CR_DDR3		(0x3 << 16)
+#define MCTL_CR_DDR2		(0x2 << 16)
+
+#define MCTL_CR_SEQUENTIAL	(0x1 << 15)
+#define MCTL_CR_INTERLEAVED	(0x0 << 15)
+
+#define MCTL_CR_FULL_WIDTH	(0x1 << 12)
+#define MCTL_CR_HALF_WIDTH	(0x0 << 12)
+#define MCTL_CR_BUS_FULL_WIDTH(x)	((x) << 12)
+
+#define MCTL_CR_PAGE_SIZE(x)	((fls(x) - 4) << 8)
+#define MCTL_CR_ROW_BITS(x)	(((x) - 1) << 4)
+#define MCTL_CR_EIGHT_BANKS	(0x1 << 2)
+#define MCTL_CR_FOUR_BANKS	(0x0 << 2)
+#define MCTL_CR_DUAL_RANK	(0x1 << 0)
+#define MCTL_CR_SINGLE_RANK	(0x0 << 0)
+
+/*
+ * CR_R1 is a register found in the R40's DRAM controller. It sets various
+ * parameters for rank 1. Bits [11:0] have the same meaning as the bits in
+ * MCTL_CR, but they apply to rank 1 only. This implies we can have
+ * different chips for rank 1 than rank 0.
+ *
+ * As address line A15 and CS1 chip select for rank 1 are muxed on the same
+ * pin, if single rank is used, A15 must be muxed in.
+ */
+#define MCTL_CR_R1_MUX_A15	(0x1 << 21)
+
+#define PROTECT_MAGIC		(0x94be6fa3)
+
+struct sunxi_mctl_ctl_reg {
+	u32 pir;		/* 0x00 PHY initialization register */
+	u32 pwrctl;		/* 0x04 */
+	u32 mrctrl;		/* 0x08 */
+	u32 clken;		/* 0x0c */
+	u32 pgsr[2];		/* 0x10 PHY general status registers */
+	u32 statr;		/* 0x18 */
+	u8 res1[0x10];		/* 0x1c */
+	u32 lp3mr11;		/* 0x2c */
+	u32 mr[4];		/* 0x30 mode registers */
+	u32 pllgcr;		/* 0x40 */
+	u32 ptr[5];		/* 0x44 PHY timing registers */
+	u32 dramtmg[9];		/* 0x58 DRAM timing registers */
+	u32 odtcfg;		/* 0x7c */
+	u32 pitmg[2];		/* 0x80 PHY interface timing registers */
+	u8 res2[0x4];		/* 0x88 */
+	u32 rfshctl0;		/* 0x8c */
+	u32 rfshtmg;		/* 0x90 refresh timing */
+	u32 rfshctl1;		/* 0x94 */
+	u32 pwrtmg;		/* 0x98 */
+	u8 res3[0x1c];		/* 0x9c */
+	u32 vtfcr;		/* 0xb8 (unused on H3) */
+	u32 dqsgmr;		/* 0xbc */
+	u32 dtcr;		/* 0xc0 */
+	u32 dtar[4];		/* 0xc4 */
+	u32 dtdr[2];		/* 0xd4 */
+	u32 dtmr[2];		/* 0xdc */
+	u32 dtbmr;		/* 0xe4 */
+	u32 catr[2];		/* 0xe8 */
+	u32 dtedr[2];		/* 0xf0 */
+	u8 res4[0x8];		/* 0xf8 */
+	u32 pgcr[4];		/* 0x100 PHY general configuration registers */
+	u32 iovcr[2];		/* 0x110 */
+	u32 dqsdr;		/* 0x118 */
+	u32 dxccr;		/* 0x11c */
+	u32 odtmap;		/* 0x120 */
+	u32 zqctl[2];		/* 0x124 */
+	u8 res6[0x14];		/* 0x12c */
+	u32 zqcr;		/* 0x140 ZQ control register */
+	u32 zqsr;		/* 0x144 ZQ status register */
+	u32 zqdr[3];		/* 0x148 ZQ data registers */
+	u8 res7[0x6c];		/* 0x154 */
+	u32 sched;		/* 0x1c0 */
+	u32 perfhpr[2];		/* 0x1c4 */
+	u32 perflpr[2];		/* 0x1cc */
+	u32 perfwr[2];		/* 0x1d4 */
+	u8 res8[0x24];		/* 0x1dc */
+	u32 acmdlr;		/* 0x200 AC master delay line register */
+	u32 aclcdlr;		/* 0x204 AC local calibrated delay line register */
+	u32 aciocr;		/* 0x208 AC I/O configuration register */
+	u8 res9[0x4];		/* 0x20c */
+	u32 acbdlr[31];		/* 0x210 AC bit delay line registers */
+	u8 res10[0x74];		/* 0x28c */
+	struct {		/* 0x300 DATX8 modules*/
+		u32 mdlr;		/* 0x00 master delay line register */
+		u32 lcdlr[3];		/* 0x04 local calibrated delay line registers */
+		u32 bdlr[11];		/* 0x10 bit delay line registers */
+		u32 sdlr;		/* 0x3c output enable bit delay registers */
+		u32 gtr;		/* 0x40 general timing register */
+		u32 gcr;		/* 0x44 general configuration register */
+		u32 gsr[3];		/* 0x48 general status registers */
+		u8 res0[0x2c];		/* 0x54 */
+	} dx[4];
+	u8 res11[0x388];	/* 0x500 */
+	u32 upd2;		/* 0x888 */
+};
+
+#define PTR3_TDINIT1(x)		((x) << 20)
+#define PTR3_TDINIT0(x)		((x) <<  0)
+
+#define PTR4_TDINIT3(x)		((x) << 20)
+#define PTR4_TDINIT2(x)		((x) <<  0)
+
+#define DRAMTMG0_TWTP(x)	((x) << 24)
+#define DRAMTMG0_TFAW(x)	((x) << 16)
+#define DRAMTMG0_TRAS_MAX(x)	((x) <<  8)
+#define DRAMTMG0_TRAS(x)	((x) <<  0)
+
+#define DRAMTMG1_TXP(x)		((x) << 16)
+#define DRAMTMG1_TRTP(x)	((x) <<  8)
+#define DRAMTMG1_TRC(x)		((x) <<  0)
+
+#define DRAMTMG2_TCWL(x)	((x) << 24)
+#define DRAMTMG2_TCL(x)		((x) << 16)
+#define DRAMTMG2_TRD2WR(x)	((x) <<  8)
+#define DRAMTMG2_TWR2RD(x)	((x) <<  0)
+
+#define DRAMTMG3_TMRW(x)	((x) << 16)
+#define DRAMTMG3_TMRD(x)	((x) << 12)
+#define DRAMTMG3_TMOD(x)	((x) <<  0)
+
+#define DRAMTMG4_TRCD(x)	((x) << 24)
+#define DRAMTMG4_TCCD(x)	((x) << 16)
+#define DRAMTMG4_TRRD(x)	((x) <<  8)
+#define DRAMTMG4_TRP(x)		((x) <<  0)
+
+#define DRAMTMG5_TCKSRX(x)	((x) << 24)
+#define DRAMTMG5_TCKSRE(x)	((x) << 16)
+#define DRAMTMG5_TCKESR(x)	((x) <<  8)
+#define DRAMTMG5_TCKE(x)	((x) <<  0)
+
+#define RFSHTMG_TREFI(x)	((x) << 16)
+#define RFSHTMG_TRFC(x)		((x) <<  0)
+
+#define PIR_CLRSR	(0x1 << 27)	/* clear status registers */
+#define PIR_QSGATE	(0x1 << 10)	/* Read DQS gate training */
+#define PIR_DRAMINIT	(0x1 << 8)	/* DRAM initialization */
+#define PIR_DRAMRST	(0x1 << 7)	/* DRAM reset */
+#define PIR_PHYRST	(0x1 << 6)	/* PHY reset */
+#define PIR_DCAL	(0x1 << 5)	/* DDL calibration */
+#define PIR_PLLINIT	(0x1 << 4)	/* PLL initialization */
+#define PIR_ZCAL	(0x1 << 1)	/* ZQ calibration */
+#define PIR_INIT	(0x1 << 0)	/* PHY initialization trigger */
+
+#define PGSR_INIT_DONE	(0x1 << 0)	/* PHY init done */
+
+#define ZQCR_PWRDOWN	(1U << 31)	/* ZQ power down */
+
+#define ACBDLR_WRITE_DELAY(x)	((x) << 8)
+
+#define DXBDLR_DQ(x)	(x)		/* DQ0-7 BDLR index */
+#define DXBDLR_DM	8		/* DM BDLR index */
+#define DXBDLR_DQS	9		/* DQS BDLR index */
+#define DXBDLR_DQSN	10		/* DQSN BDLR index */
+
+#define DXBDLR_WRITE_DELAY(x)	((x) << 8)
+#define DXBDLR_READ_DELAY(x)	((x) << 0)
+
+/*
+ * The delay parameters below allow to allegedly specify delay times of some
+ * unknown unit for each individual bit trace in each of the four data bytes
+ * the 32-bit wide access consists of. Also three control signals can be
+ * adjusted individually.
+ */
+#define NR_OF_BYTE_LANES	(32 / BITS_PER_BYTE)
+/* The eight data lines (DQn) plus DM, DQS and DQSN */
+#define LINES_PER_BYTE_LANE	(BITS_PER_BYTE + 3)
+
+struct rank_para {
+	u16 page_size;
+	u8 row_bits;
+	u8 bank_bits;
+};
+
+struct dram_para {
+	u8 dual_rank;
+	u8 bus_full_width;
+	struct rank_para ranks[2];
+	const u8 dx_read_delays[NR_OF_BYTE_LANES][LINES_PER_BYTE_LANE];
+	const u8 dx_write_delays[NR_OF_BYTE_LANES][LINES_PER_BYTE_LANE];
+	const u8 ac_delays[31];
+};
+
+static inline int ns_to_t(int nanoseconds)
+{
+	const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2;
+
+	return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000);
+}
+
+void mctl_set_timing_params(uint16_t socid, struct dram_para *para);
+
+#endif /* _SUNXI_DRAM_SUN8I_H3_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/gpio.h
new file mode 100644
index 000000000..2969a530a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -0,0 +1,255 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#ifndef _SUNXI_GPIO_H
+#define _SUNXI_GPIO_H
+
+#include <linux/types.h>
+#include <asm/arch/cpu.h>
+
+/*
+ * sunxi has 9 banks of gpio, they are:
+ * PA0 - PA17 | PB0 - PB23 | PC0 - PC24
+ * PD0 - PD27 | PE0 - PE31 | PF0 - PF5
+ * PG0 - PG9  | PH0 - PH27 | PI0 - PI12
+ */
+
+#define SUNXI_GPIO_A	0
+#define SUNXI_GPIO_B	1
+#define SUNXI_GPIO_C	2
+#define SUNXI_GPIO_D	3
+#define SUNXI_GPIO_E	4
+#define SUNXI_GPIO_F	5
+#define SUNXI_GPIO_G	6
+#define SUNXI_GPIO_H	7
+#define SUNXI_GPIO_I	8
+
+/*
+ * This defines the number of GPIO banks for the _main_ GPIO controller.
+ * You should fix up the padding in struct sunxi_gpio_reg below if you
+ * change this.
+ */
+#define SUNXI_GPIO_BANKS 9
+
+/*
+ * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO)
+ * at a different register offset.
+ *
+ * sun6i has 2 banks:
+ * PL0 - PL8  | PM0 - PM7
+ *
+ * sun8i has 1 bank:
+ * PL0 - PL11
+ *
+ * sun9i has 3 banks:
+ * PL0 - PL9  | PM0 - PM15  | PN0 - PN1
+ */
+#define SUNXI_GPIO_L	11
+#define SUNXI_GPIO_M	12
+#define SUNXI_GPIO_N	13
+
+struct sunxi_gpio {
+	u32 cfg[4];
+	u32 dat;
+	u32 drv[2];
+	u32 pull[2];
+};
+
+/* gpio interrupt control */
+struct sunxi_gpio_int {
+	u32 cfg[3];
+	u32 ctl;
+	u32 sta;
+	u32 deb;		/* interrupt debounce */
+};
+
+struct sunxi_gpio_reg {
+	struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS];
+	u8 res[0xbc];
+	struct sunxi_gpio_int gpio_int;
+};
+
+#define SUN50I_H6_GPIO_POW_MOD_SEL	0x340
+#define SUN50I_H6_GPIO_POW_MOD_VAL	0x348
+
+#define BANK_TO_GPIO(bank)	(((bank) < SUNXI_GPIO_L) ? \
+	&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
+	&((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L])
+
+#define GPIO_BANK(pin)		((pin) >> 5)
+#define GPIO_NUM(pin)		((pin) & 0x1f)
+
+#define GPIO_CFG_INDEX(pin)	(((pin) & 0x1f) >> 3)
+#define GPIO_CFG_OFFSET(pin)	((((pin) & 0x1f) & 0x7) << 2)
+
+#define GPIO_DRV_INDEX(pin)	(((pin) & 0x1f) >> 4)
+#define GPIO_DRV_OFFSET(pin)	((((pin) & 0x1f) & 0xf) << 1)
+
+#define GPIO_PULL_INDEX(pin)	(((pin) & 0x1f) >> 4)
+#define GPIO_PULL_OFFSET(pin)	((((pin) & 0x1f) & 0xf) << 1)
+
+/* GPIO bank sizes */
+#define SUNXI_GPIO_A_NR		32
+#define SUNXI_GPIO_B_NR		32
+#define SUNXI_GPIO_C_NR		32
+#define SUNXI_GPIO_D_NR		32
+#define SUNXI_GPIO_E_NR		32
+#define SUNXI_GPIO_F_NR		32
+#define SUNXI_GPIO_G_NR		32
+#define SUNXI_GPIO_H_NR		32
+#define SUNXI_GPIO_I_NR		32
+#define SUNXI_GPIO_L_NR		32
+#define SUNXI_GPIO_M_NR		32
+
+#define SUNXI_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + 0)
+
+enum sunxi_gpio_number {
+	SUNXI_GPIO_A_START = 0,
+	SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A),
+	SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B),
+	SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C),
+	SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D),
+	SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E),
+	SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
+	SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
+	SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
+	SUNXI_GPIO_L_START = 352,
+	SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
+	SUNXI_GPIO_N_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_M),
+	SUNXI_GPIO_AXP0_START = 1024,
+};
+
+/* SUNXI GPIO number definitions */
+#define SUNXI_GPA(_nr)	(SUNXI_GPIO_A_START + (_nr))
+#define SUNXI_GPB(_nr)	(SUNXI_GPIO_B_START + (_nr))
+#define SUNXI_GPC(_nr)	(SUNXI_GPIO_C_START + (_nr))
+#define SUNXI_GPD(_nr)	(SUNXI_GPIO_D_START + (_nr))
+#define SUNXI_GPE(_nr)	(SUNXI_GPIO_E_START + (_nr))
+#define SUNXI_GPF(_nr)	(SUNXI_GPIO_F_START + (_nr))
+#define SUNXI_GPG(_nr)	(SUNXI_GPIO_G_START + (_nr))
+#define SUNXI_GPH(_nr)	(SUNXI_GPIO_H_START + (_nr))
+#define SUNXI_GPI(_nr)	(SUNXI_GPIO_I_START + (_nr))
+#define SUNXI_GPL(_nr)	(SUNXI_GPIO_L_START + (_nr))
+#define SUNXI_GPM(_nr)	(SUNXI_GPIO_M_START + (_nr))
+#define SUNXI_GPN(_nr)	(SUNXI_GPIO_N_START + (_nr))
+
+#define SUNXI_GPAXP0(_nr)	(SUNXI_GPIO_AXP0_START + (_nr))
+
+/* GPIO pin function config */
+#define SUNXI_GPIO_INPUT	0
+#define SUNXI_GPIO_OUTPUT	1
+#define SUNXI_GPIO_DISABLE	7
+
+#define SUNXI_GPA_EMAC		2
+#define SUN6I_GPA_GMAC		2
+#define SUN7I_GPA_GMAC		5
+#define SUN6I_GPA_SDC2		5
+#define SUN6I_GPA_SDC3		4
+#define SUN8I_H3_GPA_UART0	2
+
+#define SUN4I_GPB_PWM		2
+#define SUN4I_GPB_TWI0		2
+#define SUN4I_GPB_TWI1		2
+#define SUN5I_GPB_TWI1		2
+#define SUN4I_GPB_TWI2		2
+#define SUN5I_GPB_TWI2		2
+#define SUN8I_V3S_GPB_TWI0	2
+#define SUN4I_GPB_UART0		2
+#define SUN5I_GPB_UART0		2
+#define SUN8I_GPB_UART2		2
+#define SUN8I_A33_GPB_UART0	3
+#define SUN8I_A83T_GPB_UART0	2
+#define SUN8I_V3S_GPB_UART0	3
+#define SUN50I_GPB_UART0	4
+
+#define SUNXI_GPC_NAND		2
+#define SUNXI_GPC_SPI0		3
+#define SUNXI_GPC_SDC2		3
+#define SUN6I_GPC_SDC3		4
+#define SUN50I_GPC_SPI0		4
+
+#define SUN8I_GPD_SDC1		3
+#define SUNXI_GPD_LCD0		2
+#define SUNXI_GPD_LVDS0		3
+#define SUNXI_GPD_PWM		2
+
+#define SUN5I_GPE_SDC2		3
+#define SUN8I_GPE_TWI2		3
+#define SUN50I_GPE_TWI2		3
+
+#define SUNXI_GPF_SDC0		2
+#define SUNXI_GPF_UART0		4
+#define SUN8I_GPF_UART0		3
+
+#define SUN4I_GPG_SDC1		4
+#define SUN5I_GPG_SDC1		2
+#define SUN6I_GPG_SDC1		2
+#define SUN8I_GPG_SDC1		2
+#define SUN8I_GPG_UART1		2
+#define SUN6I_GPG_TWI3		2
+#define SUN5I_GPG_UART1		4
+
+#define SUN6I_GPH_PWM		2
+#define SUN8I_GPH_PWM		2
+#define SUN4I_GPH_SDC1		5
+#define SUN6I_GPH_TWI0		2
+#define SUN8I_GPH_TWI0		2
+#define SUN50I_GPH_TWI0		2
+#define SUN6I_GPH_TWI1		2
+#define SUN8I_GPH_TWI1		2
+#define SUN50I_GPH_TWI1		2
+#define SUN6I_GPH_TWI2		2
+#define SUN6I_GPH_UART0		2
+#define SUN9I_GPH_UART0		2
+#define SUN50I_H6_GPH_UART0	2
+#define SUN50I_H616_GPH_UART0	2
+
+#define SUNXI_GPI_SDC3		2
+#define SUN7I_GPI_TWI3		3
+#define SUN7I_GPI_TWI4		3
+
+#define SUN6I_GPL0_R_P2WI_SCK	3
+#define SUN6I_GPL1_R_P2WI_SDA	3
+
+#define SUN8I_GPL_R_RSB		2
+#define SUN8I_H3_GPL_R_TWI	2
+#define SUN8I_A23_GPL_R_TWI	3
+#define SUN8I_GPL_R_UART	2
+#define SUN50I_GPL_R_TWI	2
+#define SUN50I_H616_GPL_R_TWI	3
+
+#define SUN9I_GPN_R_RSB		3
+
+/* GPIO pin pull-up/down config */
+#define SUNXI_GPIO_PULL_DISABLE	0
+#define SUNXI_GPIO_PULL_UP	1
+#define SUNXI_GPIO_PULL_DOWN	2
+
+/* Virtual AXP0 GPIOs */
+#define SUNXI_GPIO_AXP0_PREFIX "AXP0-"
+#define SUNXI_GPIO_AXP0_VBUS_DETECT	4
+#define SUNXI_GPIO_AXP0_VBUS_ENABLE	5
+#define SUNXI_GPIO_AXP0_GPIO_COUNT	6
+
+void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val);
+void sunxi_gpio_set_cfgpin(u32 pin, u32 val);
+int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset);
+int sunxi_gpio_get_cfgpin(u32 pin);
+int sunxi_gpio_set_drv(u32 pin, u32 val);
+int sunxi_gpio_set_pull(u32 pin, u32 val);
+int sunxi_name_to_gpio_bank(const char *name);
+int sunxi_name_to_gpio(const char *name);
+#define name_to_gpio(name) sunxi_name_to_gpio(name)
+
+#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
+int axp_gpio_init(void);
+#else
+static inline int axp_gpio_init(void) { return 0; }
+#endif
+
+#endif /* _SUNXI_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/gtbus.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/gtbus.h
new file mode 100644
index 000000000..a89102ecc
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/gtbus.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * GTBUS initialisation
+ *
+ * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
+ *                    Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+ */
+
+#ifndef _SUNXI_GTBUS_H
+#define _SUNXI_GTBUS_H
+
+#if defined(CONFIG_MACH_SUN9I)
+#include <asm/arch/gtbus_sun9i.h>
+#endif
+
+#ifndef __ASSEMBLY__
+void gtbus_init(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/gtbus_sun9i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/gtbus_sun9i.h
new file mode 100644
index 000000000..f9629923a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/gtbus_sun9i.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * GTBUS initialisation for sun9i
+ *
+ * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
+ *                    Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+ */
+
+#ifndef _SUNXI_GTBUS_SUN9I_H
+#define _SUNXI_GTBUS_SUN9I_H
+
+#include <linux/types.h>
+
+struct sunxi_gtbus_reg {
+	u32 mst_cfg[36];           /* 0x000 */
+	u8  reserved1[0x70];       /* 0x090 */
+	u32 bw_wdw_cfg;            /* 0x100 */
+	u32 mst_read_prio_cfg[2];  /* 0x104 */
+	u32 lvl2_mst_cfg;          /* 0x10c */
+	u32 sw_clk_on;             /* 0x110 */
+	u32 sw_clk_off;            /* 0x114 */
+	u32 pmu_mst_en;            /* 0x118 */
+	u32 pmu_cfg;               /* 0x11c */
+	u32 pmu_cnt[19];           /* 0x120 */
+	u32 reserved2[0x94];       /* 0x16c */
+	u32 cci400_config[3];      /* 0x200 */
+	u32 cci400_status[2];      /* 0x20c */
+};
+
+/* for register GT_MST_CFG_REG(n) */
+#define GT_ENABLE_REQ           (1<<31) /* clock on */
+#define GT_DISABLE_REQ          (1<<30) /* clock off */
+#define GT_QOS_SHIFT            28
+#define GT_THD1_SHIFT           16
+#define GT_REQN_MAX             0xf /* max no master requests in one cycle */
+#define GT_REQN_SHIFT           12
+#define GT_THD0_SHIFT           0
+
+#define GT_QOS_MAX              0x3
+#define GT_THD_MAX              0xfff
+#define GT_BW_WDW_MAX           0xffff
+
+/* mst_read_prio_cfg */
+#define GT_PRIO_LOW     0
+#define GT_PRIO_HIGH    1
+
+/* GTBUS port ids */
+#define GT_PORT_CPUM1   0
+#define GT_PORT_CPUM2   1
+#define GT_PORT_SATA    2
+#define	GT_PORT_USB3    3
+#define	GT_PORT_FE0     4
+#define	GT_PORT_BE1     5
+#define	GT_PORT_BE2     6
+#define	GT_PORT_IEP0    7
+#define	GT_PORT_FE1     8
+#define	GT_PORT_BE0     9
+#define	GT_PORT_FE2     10
+#define	GT_PORT_IEP1    11
+#define	GT_PORT_VED     12
+#define	GT_PORT_VEE     13
+#define	GT_PORT_FD      14
+#define	GT_PORT_CSI     15
+#define	GT_PORT_MP      16
+#define	GT_PORT_HSI     17
+#define	GT_PORT_SS      18
+#define	GT_PORT_TS      19
+#define	GT_PORT_DMA     20
+#define	GT_PORT_NDFC0   21
+#define	GT_PORT_NDFC1   22
+#define	GT_PORT_CPUS    23
+#define	GT_PORT_TH      24
+#define	GT_PORT_GMAC    25
+#define	GT_PORT_USB0    26
+#define	GT_PORT_MSTG0   27
+#define	GT_PORT_MSTG1   28
+#define	GT_PORT_MSTG2   29
+#define	GT_PORT_MSTG3   30
+#define	GT_PORT_USB1    31
+#define	GT_PORT_GPU0    32
+#define	GT_PORT_GPU1    33
+#define	GT_PORT_USB2    34
+#define	GT_PORT_CPUM0   35
+
+#define GP_MST_CFG_DEFAULT \
+	((GT_QOS_MAX << GT_QOS_SHIFT)   | \
+	 (GT_THD_MAX << GT_THD1_SHIFT)  | \
+	 (GT_REQN_MAX << GT_REQN_SHIFT) | \
+	 (GT_THD_MAX << GT_THD0_SHIFT))
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/i2c.h
new file mode 100644
index 000000000..1cb2ba6b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/i2c.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ */
+#ifndef _SUNXI_I2C_H_
+#define _SUNXI_I2C_H_
+
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_I2C0_ENABLE
+#define CONFIG_I2C_MVTWSI_BASE0	SUNXI_TWI0_BASE
+#endif
+#ifdef CONFIG_I2C1_ENABLE
+#define CONFIG_I2C_MVTWSI_BASE1	SUNXI_TWI1_BASE
+#endif
+#ifdef CONFIG_I2C2_ENABLE
+#define CONFIG_I2C_MVTWSI_BASE2	SUNXI_TWI2_BASE
+#endif
+#ifdef CONFIG_I2C3_ENABLE
+#define CONFIG_I2C_MVTWSI_BASE3	SUNXI_TWI3_BASE
+#endif
+#ifdef CONFIG_I2C4_ENABLE
+#define CONFIG_I2C_MVTWSI_BASE4	SUNXI_TWI4_BASE
+#endif
+#ifdef CONFIG_R_I2C_ENABLE
+#define CONFIG_I2C_MVTWSI_BASE5 SUNXI_R_TWI_BASE
+#endif
+
+/* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
+#define CONFIG_SYS_TCLK		24000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/lcdc.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/lcdc.h
new file mode 100644
index 000000000..90216bcfd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/lcdc.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi platform timing controller register and constant defines
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#ifndef _LCDC_H
+#define _LCDC_H
+
+#include <fdtdec.h>
+
+struct sunxi_lcdc_reg {
+	u32 ctrl;			/* 0x00 */
+	u32 int0;			/* 0x04 */
+	u32 int1;			/* 0x08 */
+	u8 res0[0x04];			/* 0x0c */
+	u32 tcon0_frm_ctrl;		/* 0x10 */
+	u32 tcon0_frm_seed[6];		/* 0x14 */
+	u32 tcon0_frm_table[4];		/* 0x2c */
+	u8 res1[4];			/* 0x3c */
+	u32 tcon0_ctrl;			/* 0x40 */
+	u32 tcon0_dclk;			/* 0x44 */
+	u32 tcon0_timing_active;	/* 0x48 */
+	u32 tcon0_timing_h;		/* 0x4c */
+	u32 tcon0_timing_v;		/* 0x50 */
+	u32 tcon0_timing_sync;		/* 0x54 */
+	u32 tcon0_hv_intf;		/* 0x58 */
+	u8 res2[0x04];			/* 0x5c */
+	u32 tcon0_cpu_intf;		/* 0x60 */
+	u32 tcon0_cpu_wr_dat;		/* 0x64 */
+	u32 tcon0_cpu_rd_dat0;		/* 0x68 */
+	u32 tcon0_cpu_rd_dat1;		/* 0x6c */
+	u32 tcon0_ttl_timing0;		/* 0x70 */
+	u32 tcon0_ttl_timing1;		/* 0x74 */
+	u32 tcon0_ttl_timing2;		/* 0x78 */
+	u32 tcon0_ttl_timing3;		/* 0x7c */
+	u32 tcon0_ttl_timing4;		/* 0x80 */
+	u32 tcon0_lvds_intf;		/* 0x84 */
+	u32 tcon0_io_polarity;		/* 0x88 */
+	u32 tcon0_io_tristate;		/* 0x8c */
+	u32 tcon1_ctrl;			/* 0x90 */
+	u32 tcon1_timing_source;	/* 0x94 */
+	u32 tcon1_timing_scale;		/* 0x98 */
+	u32 tcon1_timing_out;		/* 0x9c */
+	u32 tcon1_timing_h;		/* 0xa0 */
+	u32 tcon1_timing_v;		/* 0xa4 */
+	u32 tcon1_timing_sync;		/* 0xa8 */
+	u8 res3[0x44];			/* 0xac */
+	u32 tcon1_io_polarity;		/* 0xf0 */
+	u32 tcon1_io_tristate;		/* 0xf4 */
+	u8 res4[0x108];			/* 0xf8 */
+	u32 mux_ctrl;			/* 0x200 */
+	u8 res5[0x1c];			/* 0x204 */
+	u32 lvds_ana0;			/* 0x220 */
+	u32 lvds_ana1;			/* 0x224 */
+};
+
+/*
+ * LCDC register constants.
+ */
+#define SUNXI_LCDC_X(x)				(((x) - 1) << 16)
+#define SUNXI_LCDC_Y(y)				(((y) - 1) << 0)
+#define SUNXI_LCDC_TCON_VSYNC_MASK		(1 << 24)
+#define SUNXI_LCDC_TCON_HSYNC_MASK		(1 << 25)
+#define SUNXI_LCDC_CTRL_IO_MAP_MASK		(1 << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_TCON0		(0 << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_TCON1		(1 << 0)
+#define SUNXI_LCDC_CTRL_TCON_ENABLE		(1 << 31)
+#define SUNXI_LCDC_TCON0_FRM_CTRL_RGB666	((1 << 31) | (0 << 4))
+#define SUNXI_LCDC_TCON0_FRM_CTRL_RGB565	((1 << 31) | (5 << 4))
+#define SUNXI_LCDC_TCON0_FRM_SEED		0x11111111
+#define SUNXI_LCDC_TCON0_FRM_TAB0		0x01010000
+#define SUNXI_LCDC_TCON0_FRM_TAB1		0x15151111
+#define SUNXI_LCDC_TCON0_FRM_TAB2		0x57575555
+#define SUNXI_LCDC_TCON0_FRM_TAB3		0x7f7f7777
+#define SUNXI_LCDC_TCON0_CTRL_CLK_DELAY(n)	(((n) & 0x1f) << 4)
+#define SUNXI_LCDC_TCON0_CTRL_ENABLE		(1 << 31)
+#define SUNXI_LCDC_TCON0_DCLK_DIV(n)		((n) << 0)
+#define SUNXI_LCDC_TCON0_DCLK_ENABLE		(0xf << 28)
+#define SUNXI_LCDC_TCON0_TIMING_H_BP(n)		(((n) - 1) << 0)
+#define SUNXI_LCDC_TCON0_TIMING_H_TOTAL(n)	(((n) - 1) << 16)
+#define SUNXI_LCDC_TCON0_TIMING_V_BP(n)		(((n) - 1) << 0)
+#define SUNXI_LCDC_TCON0_TIMING_V_TOTAL(n)	(((n) * 2) << 16)
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+#define SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0	(1 << 20)
+#else
+#define SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0	0 /* NA */
+#endif
+#define SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(n)	((n) << 26)
+#define SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE	(1 << 31)
+#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(x)	((x) << 28)
+#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n)	(((n) & 0x1f) << 4)
+#define SUNXI_LCDC_TCON1_CTRL_INTERLACE_ENABLE	(1 << 20)
+#define SUNXI_LCDC_TCON1_CTRL_ENABLE		(1 << 31)
+#define SUNXI_LCDC_TCON1_TIMING_H_BP(n)		(((n) - 1) << 0)
+#define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n)	(((n) - 1) << 16)
+#define SUNXI_LCDC_TCON1_TIMING_V_BP(n)		(((n) - 1) << 0)
+#define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n)	((n) << 16)
+#define SUNXI_LCDC_MUX_CTRL_SRC0_MASK		(0xf << 0)
+#define SUNXI_LCDC_MUX_CTRL_SRC0(x)		((x) << 0)
+#define SUNXI_LCDC_MUX_CTRL_SRC1_MASK		(0xf << 4)
+#define SUNXI_LCDC_MUX_CTRL_SRC1(x)		((x) << 4)
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+#define SUNXI_LCDC_LVDS_ANA0			0x40040320
+#define SUNXI_LCDC_LVDS_ANA0_EN_MB		(1 << 31)
+#define SUNXI_LCDC_LVDS_ANA0_DRVC		(1 << 24)
+#define SUNXI_LCDC_LVDS_ANA0_DRVD(x)		((x) << 20)
+#else
+#define SUNXI_LCDC_LVDS_ANA0			0x3f310000
+#define SUNXI_LCDC_LVDS_ANA0_UPDATE		(1 << 22)
+#endif
+#define SUNXI_LCDC_LVDS_ANA1_INIT1		(0x1f << 26 | 0x1f << 10)
+#define SUNXI_LCDC_LVDS_ANA1_INIT2		(0x1f << 16 | 0x1f << 00)
+
+void lcdc_init(struct sunxi_lcdc_reg * const lcdc);
+void lcdc_enable(struct sunxi_lcdc_reg * const lcdc, int depth);
+void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc,
+			 const struct display_timing *mode,
+			 int clk_div, bool for_ext_vga_dac,
+			 int depth, int dclk_phase);
+void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc,
+			 const struct display_timing *mode,
+			 bool ext_hvsync, bool is_composite);
+void lcdc_pll_set(struct sunxi_ccm_reg * const ccm, int tcon,
+		  int dotclock, int *clk_div, int *clk_double,
+		  bool is_composite);
+
+#endif /* _LCDC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/mmc.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/mmc.h
new file mode 100644
index 000000000..340e25b04
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Aaron <leafy.myeh@allwinnertech.com>
+ *
+ * MMC register definition for allwinner sunxi platform.
+ */
+
+#ifndef _SUNXI_MMC_H
+#define _SUNXI_MMC_H
+
+#include <linux/types.h>
+
+struct sunxi_mmc {
+	u32 gctrl;		/* 0x00 global control */
+	u32 clkcr;		/* 0x04 clock control */
+	u32 timeout;		/* 0x08 time out */
+	u32 width;		/* 0x0c bus width */
+	u32 blksz;		/* 0x10 block size */
+	u32 bytecnt;		/* 0x14 byte count */
+	u32 cmd;		/* 0x18 command */
+	u32 arg;		/* 0x1c argument */
+	u32 resp0;		/* 0x20 response 0 */
+	u32 resp1;		/* 0x24 response 1 */
+	u32 resp2;		/* 0x28 response 2 */
+	u32 resp3;		/* 0x2c response 3 */
+	u32 imask;		/* 0x30 interrupt mask */
+	u32 mint;		/* 0x34 masked interrupt status */
+	u32 rint;		/* 0x38 raw interrupt status */
+	u32 status;		/* 0x3c status */
+	u32 ftrglevel;		/* 0x40 FIFO threshold watermark*/
+	u32 funcsel;		/* 0x44 function select */
+	u32 cbcr;		/* 0x48 CIU byte count */
+	u32 bbcr;		/* 0x4c BIU byte count */
+	u32 dbgc;		/* 0x50 debug enable */
+	u32 res0;		/* 0x54 reserved */
+	u32 a12a;		/* 0x58 Auto command 12 argument */
+	u32 ntsr;		/* 0x5c	New timing set register */
+	u32 res1[8];
+	u32 dmac;		/* 0x80 internal DMA control */
+	u32 dlba;		/* 0x84 internal DMA descr list base address */
+	u32 idst;		/* 0x88 internal DMA status */
+	u32 idie;		/* 0x8c internal DMA interrupt enable */
+	u32 chda;		/* 0x90 */
+	u32 cbda;		/* 0x94 */
+	u32 res2[26];
+#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
+	u32 res3[17];
+	u32 samp_dl;
+	u32 res4[46];
+#endif
+	u32 fifo;		/* 0x100 / 0x200 FIFO access address */
+};
+
+#define SUNXI_MMC_CLK_POWERSAVE		(0x1 << 17)
+#define SUNXI_MMC_CLK_ENABLE		(0x1 << 16)
+#define SUNXI_MMC_CLK_DIVIDER_MASK	(0xff)
+
+#define SUNXI_MMC_GCTRL_SOFT_RESET	(0x1 << 0)
+#define SUNXI_MMC_GCTRL_FIFO_RESET	(0x1 << 1)
+#define SUNXI_MMC_GCTRL_DMA_RESET	(0x1 << 2)
+#define SUNXI_MMC_GCTRL_RESET		(SUNXI_MMC_GCTRL_SOFT_RESET|\
+					 SUNXI_MMC_GCTRL_FIFO_RESET|\
+					 SUNXI_MMC_GCTRL_DMA_RESET)
+#define SUNXI_MMC_GCTRL_DMA_ENABLE	(0x1 << 5)
+#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB   (0x1 << 31)
+
+#define SUNXI_MMC_CMD_RESP_EXPIRE	(0x1 << 6)
+#define SUNXI_MMC_CMD_LONG_RESPONSE	(0x1 << 7)
+#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC	(0x1 << 8)
+#define SUNXI_MMC_CMD_DATA_EXPIRE	(0x1 << 9)
+#define SUNXI_MMC_CMD_WRITE		(0x1 << 10)
+#define SUNXI_MMC_CMD_AUTO_STOP		(0x1 << 12)
+#define SUNXI_MMC_CMD_WAIT_PRE_OVER	(0x1 << 13)
+#define SUNXI_MMC_CMD_SEND_INIT_SEQ	(0x1 << 15)
+#define SUNXI_MMC_CMD_UPCLK_ONLY	(0x1 << 21)
+#define SUNXI_MMC_CMD_START		(0x1 << 31)
+
+#define SUNXI_MMC_RINT_RESP_ERROR		(0x1 << 1)
+#define SUNXI_MMC_RINT_COMMAND_DONE		(0x1 << 2)
+#define SUNXI_MMC_RINT_DATA_OVER		(0x1 << 3)
+#define SUNXI_MMC_RINT_TX_DATA_REQUEST		(0x1 << 4)
+#define SUNXI_MMC_RINT_RX_DATA_REQUEST		(0x1 << 5)
+#define SUNXI_MMC_RINT_RESP_CRC_ERROR		(0x1 << 6)
+#define SUNXI_MMC_RINT_DATA_CRC_ERROR		(0x1 << 7)
+#define SUNXI_MMC_RINT_RESP_TIMEOUT		(0x1 << 8)
+#define SUNXI_MMC_RINT_DATA_TIMEOUT		(0x1 << 9)
+#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE	(0x1 << 10)
+#define SUNXI_MMC_RINT_FIFO_RUN_ERROR		(0x1 << 11)
+#define SUNXI_MMC_RINT_HARD_WARE_LOCKED		(0x1 << 12)
+#define SUNXI_MMC_RINT_START_BIT_ERROR		(0x1 << 13)
+#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE	(0x1 << 14)
+#define SUNXI_MMC_RINT_END_BIT_ERROR		(0x1 << 15)
+#define SUNXI_MMC_RINT_SDIO_INTERRUPT		(0x1 << 16)
+#define SUNXI_MMC_RINT_CARD_INSERT		(0x1 << 30)
+#define SUNXI_MMC_RINT_CARD_REMOVE		(0x1 << 31)
+#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT      \
+	(SUNXI_MMC_RINT_RESP_ERROR |		\
+	 SUNXI_MMC_RINT_RESP_CRC_ERROR |	\
+	 SUNXI_MMC_RINT_DATA_CRC_ERROR |	\
+	 SUNXI_MMC_RINT_RESP_TIMEOUT |		\
+	 SUNXI_MMC_RINT_DATA_TIMEOUT |		\
+	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE |	\
+	 SUNXI_MMC_RINT_FIFO_RUN_ERROR |	\
+	 SUNXI_MMC_RINT_HARD_WARE_LOCKED |	\
+	 SUNXI_MMC_RINT_START_BIT_ERROR |	\
+	 SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */
+#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT	\
+	(SUNXI_MMC_RINT_AUTO_COMMAND_DONE |	\
+	 SUNXI_MMC_RINT_DATA_OVER |		\
+	 SUNXI_MMC_RINT_COMMAND_DONE |		\
+	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE)
+
+#define SUNXI_MMC_STATUS_RXWL_FLAG		(0x1 << 0)
+#define SUNXI_MMC_STATUS_TXWL_FLAG		(0x1 << 1)
+#define SUNXI_MMC_STATUS_FIFO_EMPTY		(0x1 << 2)
+#define SUNXI_MMC_STATUS_FIFO_FULL		(0x1 << 3)
+#define SUNXI_MMC_STATUS_CARD_PRESENT		(0x1 << 8)
+#define SUNXI_MMC_STATUS_CARD_DATA_BUSY		(0x1 << 9)
+#define SUNXI_MMC_STATUS_DATA_FSM_BUSY		(0x1 << 10)
+
+#define SUNXI_MMC_NTSR_MODE_SEL_NEW		(0x1 << 31)
+
+#define SUNXI_MMC_IDMAC_RESET		(0x1 << 0)
+#define SUNXI_MMC_IDMAC_FIXBURST	(0x1 << 1)
+#define SUNXI_MMC_IDMAC_ENABLE		(0x1 << 7)
+
+#define SUNXI_MMC_IDIE_TXIRQ		(0x1 << 0)
+#define SUNXI_MMC_IDIE_RXIRQ		(0x1 << 1)
+
+#define SUNXI_MMC_COMMON_CLK_GATE		(1 << 16)
+#define SUNXI_MMC_COMMON_RESET			(1 << 18)
+
+#define SUNXI_MMC_CAL_DL_SW_EN		(0x1 << 7)
+
+struct mmc *sunxi_mmc_init(int sdc_no);
+#endif /* _SUNXI_MMC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/p2wi.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/p2wi.h
new file mode 100644
index 000000000..5f2a898b3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/p2wi.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi platform Push-Push i2c register definition.
+ *
+ * (c) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * (c)Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#ifndef _SUNXI_P2WI_H
+#define _SUNXI_P2WI_H
+
+#include <linux/types.h>
+
+#define P2WI_CTRL_RESET (0x1 << 0)
+#define P2WI_CTRL_IRQ_EN (0x1 << 1)
+#define P2WI_CTRL_TRANS_ABORT (0x1 << 6)
+#define P2WI_CTRL_TRANS_START (0x1 << 7)
+
+#define __P2WI_CC_CLK(n) (((n) & 0xff) << 0)
+#define P2WI_CC_CLK_MASK __P2WI_CC_CLK_DIV(0xff)
+#define __P2WI_CC_CLK_DIV(n) (((n) >> 1) - 1)
+#define P2WI_CC_CLK_DIV(n) \
+	__P2WI_CC_CLK(__P2WI_CC_CLK_DIV(n))
+#define P2WI_CC_SDA_OUT_DELAY(n) (((n) & 0x7) << 8)
+#define P2WI_CC_SDA_OUT_DELAY_MASK P2WI_CC_SDA_OUT_DELAY(0x7)
+
+#define P2WI_IRQ_TRANS_DONE (0x1 << 0)
+#define P2WI_IRQ_TRANS_ERR (0x1 << 1)
+#define P2WI_IRQ_LOAD_BUSY (0x1 << 2)
+
+#define P2WI_STAT_TRANS_DONE (0x1 << 0)
+#define P2WI_STAT_TRANS_ERR (0x1 << 1)
+#define P2WI_STAT_LOAD_BUSY (0x1 << 2)
+#define __P2WI_STAT_TRANS_ERR(n) (((n) & 0xff) << 8)
+#define P2WI_STAT_TRANS_ERR_MASK __P2WI_STAT_TRANS_ERR_ID(0xff)
+#define __P2WI_STAT_TRANS_ERR_BYTE_1 0x01
+#define __P2WI_STAT_TRANS_ERR_BYTE_2 0x02
+#define __P2WI_STAT_TRANS_ERR_BYTE_3 0x04
+#define __P2WI_STAT_TRANS_ERR_BYTE_4 0x08
+#define __P2WI_STAT_TRANS_ERR_BYTE_5 0x10
+#define __P2WI_STAT_TRANS_ERR_BYTE_6 0x20
+#define __P2WI_STAT_TRANS_ERR_BYTE_7 0x40
+#define __P2WI_STAT_TRANS_ERR_BYTE_8 0x80
+#define P2WI_STAT_TRANS_ERR_BYTE_1 \
+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_1)
+#define P2WI_STAT_TRANS_ERR_BYTE_2 \
+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_2)
+#define P2WI_STAT_TRANS_ERR_BYTE_3 \
+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_3)
+#define P2WI_STAT_TRANS_ERR_BYTE_4 \
+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_4)
+#define P2WI_STAT_TRANS_ERR_BYTE_5 \
+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_5)
+#define P2WI_STAT_TRANS_ERR_BYTE_6 \
+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_6)
+#define P2WI_STAT_TRANS_ERR_BYTE_7 \
+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_7)
+#define P2WI_STAT_TRANS_ERR_BYTE_8 \
+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_8)
+
+#define P2WI_DATADDR_BYTE_1(n) (((n) & 0xff) << 0)
+#define P2WI_DATADDR_BYTE_1_MASK P2WI_DATADDR_BYTE_1(0xff)
+#define P2WI_DATADDR_BYTE_2(n) (((n) & 0xff) << 8)
+#define P2WI_DATADDR_BYTE_2_MASK P2WI_DATADDR_BYTE_2(0xff)
+#define P2WI_DATADDR_BYTE_3(n) (((n) & 0xff) << 16)
+#define P2WI_DATADDR_BYTE_3_MASK P2WI_DATADDR_BYTE_3(0xff)
+#define P2WI_DATADDR_BYTE_4(n) (((n) & 0xff) << 24)
+#define P2WI_DATADDR_BYTE_4_MASK P2WI_DATADDR_BYTE_4(0xff)
+#define P2WI_DATADDR_BYTE_5(n) (((n) & 0xff) << 0)
+#define P2WI_DATADDR_BYTE_5_MASK P2WI_DATADDR_BYTE_5(0xff)
+#define P2WI_DATADDR_BYTE_6(n) (((n) & 0xff) << 8)
+#define P2WI_DATADDR_BYTE_6_MASK P2WI_DATADDR_BYTE_6(0xff)
+#define P2WI_DATADDR_BYTE_7(n) (((n) & 0xff) << 16)
+#define P2WI_DATADDR_BYTE_7_MASK P2WI_DATADDR_BYTE_7(0xff)
+#define P2WI_DATADDR_BYTE_8(n) (((n) & 0xff) << 24)
+#define P2WI_DATADDR_BYTE_8_MASK P2WI_DATADDR_BYTE_8(0xff)
+
+#define __P2WI_DATA_NUM_BYTES(n) (((n) & 0x7) << 0)
+#define P2WI_DATA_NUM_BYTES_MASK __P2WI_DATA_NUM_BYTES(0x7)
+#define P2WI_DATA_NUM_BYTES(n) __P2WI_DATA_NUM_BYTES((n) - 1)
+#define P2WI_DATA_NUM_BYTES_READ (0x1 << 4)
+
+#define P2WI_DATA_BYTE_1(n) (((n) & 0xff) << 0)
+#define P2WI_DATA_BYTE_1_MASK P2WI_DATA_BYTE_1(0xff)
+#define P2WI_DATA_BYTE_2(n) (((n) & 0xff) << 8)
+#define P2WI_DATA_BYTE_2_MASK P2WI_DATA_BYTE_2(0xff)
+#define P2WI_DATA_BYTE_3(n) (((n) & 0xff) << 16)
+#define P2WI_DATA_BYTE_3_MASK P2WI_DATA_BYTE_3(0xff)
+#define P2WI_DATA_BYTE_4(n) (((n) & 0xff) << 24)
+#define P2WI_DATA_BYTE_4_MASK P2WI_DATA_BYTE_4(0xff)
+#define P2WI_DATA_BYTE_5(n) (((n) & 0xff) << 0)
+#define P2WI_DATA_BYTE_5_MASK P2WI_DATA_BYTE_5(0xff)
+#define P2WI_DATA_BYTE_6(n) (((n) & 0xff) << 8)
+#define P2WI_DATA_BYTE_6_MASK P2WI_DATA_BYTE_6(0xff)
+#define P2WI_DATA_BYTE_7(n) (((n) & 0xff) << 16)
+#define P2WI_DATA_BYTE_7_MASK P2WI_DATA_BYTE_7(0xff)
+#define P2WI_DATA_BYTE_8(n) (((n) & 0xff) << 24)
+#define P2WI_DATA_BYTE_8_MASK P2WI_DATA_BYTE_8(0xff)
+
+#define P2WI_LINECTRL_SDA_CTRL_EN (0x1 << 0)
+#define P2WI_LINECTRL_SDA_OUT_HIGH (0x1 << 1)
+#define P2WI_LINECTRL_SCL_CTRL_EN (0x1 << 2)
+#define P2WI_LINECTRL_SCL_OUT_HIGH (0x1 << 3)
+#define P2WI_LINECTRL_SDA_STATE_HIGH (0x1 << 4)
+#define P2WI_LINECTRL_SCL_STATE_HIGH (0x1 << 5)
+
+#define P2WI_PM_DEV_ADDR(n) (((n) & 0xff) << 0)
+#define P2WI_PM_DEV_ADDR_MASK P2WI_PM_DEV_ADDR(0xff)
+#define P2WI_PM_CTRL_ADDR(n) (((n) & 0xff) << 8)
+#define P2WI_PM_CTRL_ADDR_MASK P2WI_PM_CTRL_ADDR(0xff)
+#define P2WI_PM_INIT_DATA(n) (((n) & 0xff) << 16)
+#define P2WI_PM_INIT_DATA_MASK P2WI_PM_INIT_DATA(0xff)
+#define P2WI_PM_INIT_SEND (0x1 << 31)
+
+struct sunxi_p2wi_reg {
+	u32 ctrl;	/* 0x00 control */
+	u32 cc;		/* 0x04 clock control */
+	u32 irq;	/* 0x08 interrupt */
+	u32 status;	/* 0x0c status */
+	u32 dataddr0;	/* 0x10 data address 0 */
+	u32 dataddr1;	/* 0x14 data address 1 */
+	u32 numbytes;	/* 0x18 num bytes */
+	u32 data0;	/* 0x1c data buffer 0 */
+	u32 data1;	/* 0x20 data buffer 1 */
+	u32 linectrl;	/* 0x24 line control */
+	u32 pm;		/* 0x28 power management */
+};
+
+void p2wi_init(void);
+int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data);
+int p2wi_read(const u8 addr, u8 *data);
+int p2wi_write(const u8 addr, u8 data);
+
+#endif /* _SUNXI_P2WI_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/pmic_bus.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/pmic_bus.h
new file mode 100644
index 000000000..3ccfe138f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/pmic_bus.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Sunxi PMIC bus access helpers header
+ */
+
+#ifndef _SUNXI_PMIC_BUS_H
+#define _SUNXI_PMIS_BUS_H
+
+int pmic_bus_init(void);
+int pmic_bus_read(u8 reg, u8 *data);
+int pmic_bus_write(u8 reg, u8 data);
+int pmic_bus_setbits(u8 reg, u8 bits);
+int pmic_bus_clrbits(u8 reg, u8 bits);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm.h
new file mode 100644
index 000000000..5106076f5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * Sunxi platform prcm register definition.
+ */
+
+#ifndef _SUNXI_PRCM_H
+#define _SUNXI_PRCM_H
+
+/* prcm regs definition */
+#if defined(CONFIG_SUN50I_GEN_H6)
+#include <asm/arch/prcm_sun50i.h>
+#else
+#include <asm/arch/prcm_sun6i.h>
+#endif
+
+#endif /* _SUNXI_PRCM_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
new file mode 100644
index 000000000..5f636e838
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi H6 Power Management Unit register definition.
+ *
+ * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#ifndef _SUN50I_PRCM_H
+#define _SUN50I_PRCM_H
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+
+struct sunxi_prcm_reg {
+	u32 cpus_cfg;		/* 0x000 */
+	u8 res0[0x8];		/* 0x004 */
+	u32 apbs1_cfg;		/* 0x00c */
+	u32 apbs2_cfg;		/* 0x010 */
+	u8 res1[0x108];		/* 0x014 */
+	u32 tmr_gate_reset;	/* 0x11c */
+	u8 res2[0xc];		/* 0x120 */
+	u32 twd_gate_reset;	/* 0x12c */
+	u8 res3[0xc];		/* 0x130 */
+	u32 pwm_gate_reset;	/* 0x13c */
+	u8 res4[0x4c];		/* 0x140 */
+	u32 uart_gate_reset;	/* 0x18c */
+	u8 res5[0xc];		/* 0x190 */
+	u32 twi_gate_reset;	/* 0x19c */
+	u8 res6[0x1c];		/* 0x1a0 */
+	u32 rsb_gate_reset;	/* 0x1bc */
+	u32 cir_cfg;		/* 0x1c0 */
+	u8 res7[0x8];		/* 0x1c4 */
+	u32 cir_gate_reset;	/* 0x1cc */
+	u8 res8[0x10];		/* 0x1d0 */
+	u32 w1_cfg;		/* 0x1e0 */
+	u8 res9[0x8];		/* 0x1e4 */
+	u32 w1_gate_reset;	/* 0x1ec */
+	u8 res10[0x1c];		/* 0x1f0 */
+	u32 rtc_gate_reset;	/* 0x20c */
+};
+check_member(sunxi_prcm_reg, rtc_gate_reset, 0x20c);
+
+#define PRCM_TWI_GATE		(1 << 0)
+#define PRCM_TWI_RESET		(1 << 16)
+
+#endif /* __ASSEMBLY__ */
+#endif /* _PRCM_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h
new file mode 100644
index 000000000..ab664e80b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h
@@ -0,0 +1,247 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi A31 Power Management Unit register definition.
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#ifndef _SUN6I_PRCM_H
+#define _SUN6I_PRCM_H
+
+#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4)
+#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3)
+#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1)
+#define PRCM_CPUS_CFG_PRE_DIV(n) \
+	__PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n))
+#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8)
+#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f)
+#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1)
+#define PRCM_CPUS_CFG_POST_DIV(n) \
+	__PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n))
+#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16)
+#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3)
+#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0
+#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1
+#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2
+#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3
+#define PRCM_CPUS_CFG_CLK_SRC_LOSC \
+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC)
+#define PRCM_CPUS_CFG_CLK_SRC_HOSC \
+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC)
+#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \
+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6)
+#define PRCM_CPUS_CFG_CLK_SRC_PDIV \
+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV)
+
+#define __PRCM_APB0_RATIO(n) (((n) & 0x3) << 0)
+#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3)
+#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1)
+#define PRCM_APB0_RATIO_DIV(n) \
+	__PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n))
+
+#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0)
+#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1)
+
+#define PRCM_APB0_GATE_PIO (0x1 << 0)
+#define PRCM_APB0_GATE_IR (0x1 << 1)
+#define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
+#define PRCM_APB0_GATE_P2WI (0x1 << 3)		/* sun6i */
+#define PRCM_APB0_GATE_RSB (0x1 << 3)		/* sun8i */
+#define PRCM_APB0_GATE_UART (0x1 << 4)
+#define PRCM_APB0_GATE_1WIRE (0x1 << 5)
+#define PRCM_APB0_GATE_I2C (0x1 << 6)
+
+#define PRCM_APB0_RESET_PIO (0x1 << 0)
+#define PRCM_APB0_RESET_IR (0x1 << 1)
+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
+#define PRCM_APB0_RESET_UART (0x1 << 4)
+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
+#define PRCM_APB0_RESET_I2C (0x1 << 6)
+
+#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0)
+#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1)
+#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4)
+#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(0x3)
+#define __PRCM_PLL_CTRL_USB_CLK_0 0x0
+#define __PRCM_PLL_CTRL_USB_CLK_1 0x1
+#define __PRCM_PLL_CTRL_USB_CLK_2 0x2
+#define __PRCM_PLL_CTRL_USB_CLK_3 0x3
+#define PRCM_PLL_CTRL_USB_CLK_0 \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0)
+#define PRCM_PLL_CTRL_USB_CLK_1 \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1)
+#define PRCM_PLL_CTRL_USB_CLK_2 \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2)
+#define PRCM_PLL_CTRL_USB_CLK_3 \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3)
+#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12)
+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \
+	__PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3)
+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \
+	__PRCM_PLL_CTRL_INT_PLL_IN_SEL(n)
+#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20)
+#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3)
+#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0
+#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1
+#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2
+#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3
+#define PRCM_PLL_CTRL_HOSC_CLK_0 \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0)
+#define PRCM_PLL_CTRL_HOSC_CLK_1 \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1)
+#define PRCM_PLL_CTRL_HOSC_CLK_2 \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2)
+#define PRCM_PLL_CTRL_HOSC_CLK_3 \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3)
+#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24)
+#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0)
+#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1)
+#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2)
+#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3)
+#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */
+#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16)
+#define PRCM_PLL_CTRL_LDO_OUT_MASK \
+	__PRCM_PLL_CTRL_LDO_OUT(0x7)
+/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
+#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
+#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
+#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
+
+#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
+
+#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0)
+#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf)
+#define __PRCM_CLK_MOD0_M_X(n) (n - 1)
+#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n))
+#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8)
+#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7)
+#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16)
+#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3)
+#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) - 1)
+#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n))
+#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20)
+#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7)
+#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24)
+#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7)
+#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31)
+
+#define PRCM_APB0_RESET_PIO (0x1 << 0)
+#define PRCM_APB0_RESET_IR (0x1 << 1)
+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
+#define PRCM_APB0_RESET_UART (0x1 << 4)
+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
+#define PRCM_APB0_RESET_I2C (0x1 << 6)
+
+#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8)
+#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7)
+#define __PRCM_CLK_OUTD_M_X() ((n) - 1)
+#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n))
+#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20)
+#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7)
+#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1)
+#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n)
+#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24)
+#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3)
+#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0
+#define __PRCM_CLK_OUTD_SRC_LOSC 0x1
+#define __PRCM_CLK_OUTD_SRC_HOSC 0x2
+#define __PRCM_CLK_OUTD_SRC_ERR 0x3
+#define PRCM_CLK_OUTD_SRC_LOSC2 \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2)
+#define PRCM_CLK_OUTD_SRC_LOSC \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC)
+#define PRCM_CLK_OUTD_SRC_HOSC \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC)
+#define PRCM_CLK_OUTD_SRC_ERR \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR)
+#define PRCM_CLK_OUTD_EN (0x1 << 31)
+
+#define PRCM_CPU0_PWROFF (0x1 << 0)
+#define PRCM_CPU1_PWROFF (0x1 << 1)
+#define PRCM_CPU2_PWROFF (0x1 << 2)
+#define PRCM_CPU3_PWROFF (0x1 << 3)
+#define PRCM_CPU_ALL_PWROFF (0xf << 0)
+
+#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0)
+#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1)
+#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2)
+#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3)
+
+#define PRCM_VDD_GPU_PWROFF (0x1 << 0)
+
+#define PRCM_VDD_SYS_RESET (0x1 << 0)
+
+#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff)
+
+#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff)
+
+#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
+
+#define PRCM_SEC_SWITCH_APB0_CLK_NONSEC (0x1 << 0)
+#define PRCM_SEC_SWITCH_PLL_CFG_NONSEC (0x1 << 1)
+#define PRCM_SEC_SWITCH_PWR_GATE_NONSEC (0x1 << 2)
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+
+struct sunxi_prcm_reg {
+	u32 cpus_cfg;		/* 0x000 */
+	u8 res0[0x8];		/* 0x004 */
+	u32 apb0_ratio;		/* 0x00c */
+	u32 cpu0_cfg;		/* 0x010 */
+	u32 cpu1_cfg;		/* 0x014 */
+	u32 cpu2_cfg;		/* 0x018 */
+	u32 cpu3_cfg;		/* 0x01c */
+	u8 res1[0x8];		/* 0x020 */
+	u32 apb0_gate;		/* 0x028 */
+	u8 res2[0x14];		/* 0x02c */
+	u32 pll_ctrl0;		/* 0x040 */
+	u32 pll_ctrl1;		/* 0x044 */
+	u8 res3[0x8];		/* 0x048 */
+	u32 clk_1wire;		/* 0x050 */
+	u32 clk_ir;		/* 0x054 */
+	u8 res4[0x58];		/* 0x058 */
+	u32 apb0_reset;		/* 0x0b0 */
+	u8 res5[0x3c];		/* 0x0b4 */
+	u32 clk_outd;		/* 0x0f0 */
+	u8 res6[0xc];		/* 0x0f4 */
+	u32 cpu_pwroff;		/* 0x100 */
+	u8 res7[0xc];		/* 0x104 */
+	u32 vdd_sys_pwroff;	/* 0x110 */
+	u8 res8[0x4];		/* 0x114 */
+	u32 gpu_pwroff;		/* 0x118 */
+	u8 res9[0x4];		/* 0x11c */
+	u32 vdd_pwr_reset;	/* 0x120 */
+	u8 res10[0x1c];		/* 0x124 */
+	u32 cpu_pwr_clamp[4];	/* 0x140 but first one is actually unused */
+	u8 res11[0x30];		/* 0x150 */
+	u32 dram_pwr;		/* 0x180 */
+	u8 res12[0xc];		/* 0x184 */
+	u32 dram_tst;		/* 0x190 */
+	u8 res13[0x3c];		/* 0x194 */
+	u32 prcm_sec_switch;	/* 0x1d0 */
+};
+
+void prcm_apb0_enable(u32 flags);
+void prcm_apb0_disable(u32 flags);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _PRCM_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/pwm.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/pwm.h
new file mode 100644
index 000000000..b89bddd2e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/pwm.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _SUNXI_PWM_H
+#define _SUNXI_PWM_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define SUNXI_PWM_CTRL_REG		(SUNXI_PWM_BASE + 0)
+#define SUNXI_PWM_CH0_PERIOD		(SUNXI_PWM_BASE + 4)
+
+#define SUNXI_PWM_CTRL_PRESCALE0(x)	((x) & 0xf)
+#define SUNXI_PWM_CTRL_PRESCALE0_MASK	0xf
+#define SUNXI_PWM_CTRL_ENABLE0		(0x5 << 4)
+#define SUNXI_PWM_CTRL_POLARITY0(x)	((x) << 5)
+#define SUNXI_PWM_CTRL_CH0_ACT_STA	BIT(5)
+#define SUNXI_PWM_CTRL_CLK_GATE		BIT(6)
+
+#define SUNXI_PWM_CH0_PERIOD_MAX	(0xffff)
+#define SUNXI_PWM_CH0_PERIOD_PRD(x)	((x & 0xffff) << 16)
+#define SUNXI_PWM_CH0_PERIOD_DUTY(x)	((x) & 0xffff)
+
+#define SUNXI_PWM_PERIOD_80PCT		0x04af03c0
+
+#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN5I
+#define SUNXI_PWM_PIN0			SUNXI_GPB(2)
+#define SUNXI_PWM_MUX			SUN4I_GPB_PWM
+#endif
+
+#if defined CONFIG_MACH_SUN6I
+#define SUNXI_PWM_PIN0			SUNXI_GPH(13)
+#define SUNXI_PWM_MUX			SUN6I_GPH_PWM
+#endif
+
+#if defined CONFIG_MACH_SUN8I_A23 || defined CONFIG_MACH_SUN8I_A33
+#define SUNXI_PWM_PIN0			SUNXI_GPH(0)
+#define SUNXI_PWM_MUX			SUN8I_GPH_PWM
+#endif
+
+struct sunxi_pwm {
+	u32 ctrl;
+	u32 ch0_period;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/rsb.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/rsb.h
new file mode 100644
index 000000000..8c64a995f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/rsb.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on allwinner u-boot sources rsb code which is:
+ * (C) Copyright 2007-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * lixiang <lixiang@allwinnertech.com>
+ */
+
+#ifndef __SUNXI_RSB_H
+#define __SUNXI_RSB_H
+
+#include <asm/io.h>
+
+struct sunxi_rsb_reg {
+	u32 ctrl;	/* 0x00 */
+	u32 ccr;	/* 0x04 */
+	u32 inte;	/* 0x08 */
+	u32 stat;	/* 0x0c */
+	u32 addr;	/* 0x10 */
+	u8 res0[8];	/* 0x14 */
+	u32 data;	/* 0x1c */
+	u8 res1[4];	/* 0x20 */
+	u32 lcr;	/* 0x24 */
+	u32 dmcr;	/* 0x28 */
+	u32 cmd;	/* 0x2c */
+	u32 devaddr;	/* 0x30 */
+};
+
+#define RSB_CTRL_SOFT_RST		(1 << 0)
+#define RSB_CTRL_START_TRANS		(1 << 7)
+
+#define RSB_STAT_TOVER_INT		(1 << 0)
+#define RSB_STAT_TERR_INT		(1 << 1)
+#define RSB_STAT_LBSY_INT		(1 << 2)
+
+#define RSB_DMCR_DEVICE_MODE_DATA	0x7c3e00
+#define RSB_DMCR_DEVICE_MODE_START	(1 << 31)
+
+#define RSB_CMD_BYTE_WRITE		0x4e
+#define RSB_CMD_BYTE_READ		0x8b
+#define RSB_CMD_SET_RTSADDR		0xe8
+
+#define RSB_DEVADDR_RUNTIME_ADDR(x)	((x) << 16)
+#define RSB_DEVADDR_DEVICE_ADDR(x)	((x) << 0)
+
+int rsb_init(void);
+int rsb_set_device_address(u16 device_addr, u16 runtime_addr);
+int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data);
+int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/spl.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/spl.h
new file mode 100644
index 000000000..58cdf806d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/spl.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#include <sunxi_image.h>
+
+#define SPL_ADDR		CONFIG_SUNXI_SRAM_ADDRESS
+
+/* The low 8-bits of the 'boot_media' field in the SPL header */
+#define SUNXI_BOOTED_FROM_MMC0	0
+#define SUNXI_BOOTED_FROM_NAND	1
+#define SUNXI_BOOTED_FROM_MMC2	2
+#define SUNXI_BOOTED_FROM_SPI	3
+#define SUNXI_BOOTED_FROM_MMC0_HIGH	0x10
+#define SUNXI_BOOTED_FROM_MMC2_HIGH	0x12
+
+#define is_boot0_magic(addr)	(memcmp((void *)(addr), BOOT0_MAGIC, 8) == 0)
+
+uint32_t sunxi_get_boot_device(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/sys_proto.h
new file mode 100644
index 000000000..064602292
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/sys_proto.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <linux/types.h>
+
+void sdelay(unsigned long);
+
+/* return_to_fel() - Return to BROM from SPL
+ *
+ * This returns back into the BROM after U-Boot SPL has performed its initial
+ * init. It uses the provided lr and sp to do so.
+ *
+ * @lr:		BROM link register value (return address)
+ * @sp:		BROM stack pointer
+ */
+void return_to_fel(uint32_t lr, uint32_t sp);
+
+/* Board / SoC level designware gmac init */
+#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUN7I_GMAC
+void eth_init_board(void);
+#else
+static inline void eth_init_board(void) {}
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/timer.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/timer.h
new file mode 100644
index 000000000..bb5626d89
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/timer.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Configuration settings for the Allwinner A10-evb board.
+ */
+
+#ifndef _SUNXI_TIMER_H_
+#define _SUNXI_TIMER_H_
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/arch/watchdog.h>
+
+/* General purpose timer */
+struct sunxi_timer {
+	u32 ctl;
+	u32 inter;
+	u32 val;
+	u8 res[4];
+};
+
+/* Audio video sync*/
+struct sunxi_avs {
+	u32 ctl;		/* 0x80 */
+	u32 cnt0;		/* 0x84 */
+	u32 cnt1;		/* 0x88 */
+	u32 div;		/* 0x8c */
+};
+
+/* 64 bit counter */
+struct sunxi_64cnt {
+	u32 ctl;		/* 0xa0 */
+	u32 lo;			/* 0xa4 */
+	u32 hi;			/* 0xa8 */
+};
+
+/* Rtc */
+struct sunxi_rtc {
+	u32 ctl;		/* 0x100 */
+	u32 yymmdd;		/* 0x104 */
+	u32 hhmmss;		/* 0x108 */
+};
+
+/* Alarm */
+struct sunxi_alarm {
+	u32 ddhhmmss;		/* 0x10c */
+	u32 hhmmss;		/* 0x110 */
+	u32 en;			/* 0x114 */
+	u32 irqen;		/* 0x118 */
+	u32 irqsta;		/* 0x11c */
+};
+
+/* Timer general purpose register */
+struct sunxi_tgp {
+	u32 tgpd;
+};
+
+struct sunxi_timer_reg {
+	u32 tirqen;		/* 0x00 */
+	u32 tirqsta;		/* 0x04 */
+	u8 res1[8];
+	struct sunxi_timer timer[6];	/* We have 6 timers */
+	u8 res2[16];
+	struct sunxi_avs avs;
+#if defined(CONFIG_SUNXI_GEN_SUN4I) || defined(CONFIG_MACH_SUN8I_R40)
+	struct sunxi_wdog wdog;	/* 0x90 */
+	/* XXX the following is not accurate for sun5i/sun7i */
+	struct sunxi_64cnt cnt64;	/* 0xa0 */
+	u8 res4[0x58];
+	struct sunxi_rtc rtc;
+	struct sunxi_alarm alarm;
+	struct sunxi_tgp tgp[4];
+	u8 res5[8];
+	u32 cpu_cfg;
+#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
+	u8 res3[16];
+	struct sunxi_wdog wdog[5];	/* We have 5 watchdogs */
+#endif
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/tve.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/tve.h
new file mode 100644
index 000000000..46cd87e79
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/tve.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi TV encoder register and constant defines
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#ifndef _TVE_H
+#define _TVE_H
+
+enum tve_mode {
+	tve_mode_vga,
+	tve_mode_composite_pal,
+	tve_mode_composite_ntsc,
+	tve_mode_composite_pal_m,
+	tve_mode_composite_pal_nc,
+};
+
+/*
+ * This is based on the A10s User Manual, and the A10s only supports
+ * composite video and not vga like the A10 / A20 does, still other
+ * than the removed vga out capability the tvencoder seems to be the same.
+ * "unknown#" registers are registers which are used in the A10 kernel code,
+ * but not documented in the A10s User Manual.
+ */
+struct sunxi_tve_reg {
+	u32 gctrl;			/* 0x000 */
+	u32 cfg0;			/* 0x004 */
+	u32 dac_cfg0;			/* 0x008 */
+	u32 filter;			/* 0x00c */
+	u32 chroma_freq;		/* 0x010 */
+	u32 porch_num;			/* 0x014 */
+	u32 unknown0;			/* 0x018 */
+	u32 line_num;			/* 0x01c */
+	u32 blank_black_level;		/* 0x020 */
+	u32 unknown1;			/* 0x024, seems to be 1 byte per dac */
+	u8 res0[0x08];			/* 0x028 */
+	u32 auto_detect_en;		/* 0x030 */
+	u32 auto_detect_int_status;	/* 0x034 */
+	u32 auto_detect_status;		/* 0x038 */
+	u32 auto_detect_debounce;	/* 0x03c */
+	u32 csc_reg0;			/* 0x040 */
+	u32 csc_reg1;			/* 0x044 */
+	u32 csc_reg2;			/* 0x048 */
+	u32 csc_reg3;			/* 0x04c */
+	u8 res1[0xb0];			/* 0x050 */
+	u32 color_burst;		/* 0x100 */
+	u32 vsync_num;			/* 0x104 */
+	u32 notch_freq;			/* 0x108 */
+	u32 cbr_level;			/* 0x10c */
+	u32 burst_phase;		/* 0x110 */
+	u32 burst_width;		/* 0x114 */
+	u32 unknown2;			/* 0x118 */
+	u32 sync_vbi_level;		/* 0x11c */
+	u32 white_level;		/* 0x120 */
+	u32 active_num;			/* 0x124 */
+	u32 chroma_bw_gain;		/* 0x128 */
+	u32 notch_width;		/* 0x12c */
+	u32 resync_num;			/* 0x130 */
+	u32 slave_para;			/* 0x134 */
+	u32 cfg1;			/* 0x138 */
+	u32 cfg2;			/* 0x13c */
+};
+
+/*
+ * TVE register constants.
+ */
+#define SUNXI_TVE_GCTRL_ENABLE			(1 << 0)
+/*
+ * Select input 0 to disable dac, 1 - 4 to feed dac from tve0, 5 - 8 to feed
+ * dac from tve1. When using tve1 the mux value must be written to both tve0's
+ * and tve1's gctrl reg.
+ */
+#define SUNXI_TVE_GCTRL_DAC_INPUT_MASK(dac)	(0xf << (((dac) + 1) * 4))
+#define SUNXI_TVE_GCTRL_DAC_INPUT(dac, sel)	((sel) << (((dac) + 1) * 4))
+#define SUNXI_TVE_CFG0_VGA			0x20000000
+#define SUNXI_TVE_CFG0_PAL			0x07030001
+#define SUNXI_TVE_CFG0_NTSC			0x07030000
+#define SUNXI_TVE_DAC_CFG0_VGA			0x403e1ac7
+#ifdef CONFIG_MACH_SUN5I
+#define SUNXI_TVE_DAC_CFG0_COMPOSITE		0x433f0009
+#else
+#define SUNXI_TVE_DAC_CFG0_COMPOSITE		0x403f0008
+#endif
+#define SUNXI_TVE_FILTER_COMPOSITE		0x00000120
+#define SUNXI_TVE_CHROMA_FREQ_PAL_M		0x21e6efe3
+#define SUNXI_TVE_CHROMA_FREQ_PAL_NC		0x21f69446
+#define SUNXI_TVE_PORCH_NUM_PAL			0x008a0018
+#define SUNXI_TVE_PORCH_NUM_NTSC		0x00760020
+#define SUNXI_TVE_LINE_NUM_PAL			0x00160271
+#define SUNXI_TVE_LINE_NUM_NTSC			0x0016020d
+#define SUNXI_TVE_BLANK_BLACK_LEVEL_PAL		0x00fc00fc
+#define SUNXI_TVE_BLANK_BLACK_LEVEL_NTSC	0x00f0011a
+#define SUNXI_TVE_UNKNOWN1_VGA			0x00000000
+#define SUNXI_TVE_UNKNOWN1_COMPOSITE		0x18181818
+#define SUNXI_TVE_AUTO_DETECT_EN_DET_EN(dac)	(1 << ((dac) + 0))
+#define SUNXI_TVE_AUTO_DETECT_EN_INT_EN(dac)	(1 << ((dac) + 16))
+#define SUNXI_TVE_AUTO_DETECT_INT_STATUS(dac)	(1 << ((dac) + 0))
+#define SUNXI_TVE_AUTO_DETECT_STATUS_SHIFT(dac)	((dac) * 8)
+#define SUNXI_TVE_AUTO_DETECT_STATUS_MASK(dac)	(3 << ((dac) * 8))
+#define SUNXI_TVE_AUTO_DETECT_STATUS_NONE	0
+#define SUNXI_TVE_AUTO_DETECT_STATUS_CONNECTED	1
+#define SUNXI_TVE_AUTO_DETECT_STATUS_SHORT_GND	3
+#define SUNXI_TVE_AUTO_DETECT_DEBOUNCE_SHIFT(d)	((d) * 8)
+#define SUNXI_TVE_AUTO_DETECT_DEBOUNCE_MASK(d)	(0xf << ((d) * 8))
+#define SUNXI_TVE_CSC_REG0_ENABLE		(1 << 31)
+#define SUNXI_TVE_CSC_REG0			0x08440832
+#define SUNXI_TVE_CSC_REG1			0x3b6dace1
+#define SUNXI_TVE_CSC_REG2			0x0e1d13dc
+#define SUNXI_TVE_CSC_REG3			0x00108080
+#define SUNXI_TVE_COLOR_BURST_PAL_M		0x00000000
+#define SUNXI_TVE_CBR_LEVEL_PAL			0x00002828
+#define SUNXI_TVE_CBR_LEVEL_NTSC		0x0000004f
+#define SUNXI_TVE_BURST_PHASE_NTSC		0x00000000
+#define SUNXI_TVE_BURST_WIDTH_COMPOSITE		0x0016447e
+#define SUNXI_TVE_UNKNOWN2_PAL			0x0000e0e0
+#define SUNXI_TVE_UNKNOWN2_NTSC			0x0000a0a0
+#define SUNXI_TVE_SYNC_VBI_LEVEL_NTSC		0x001000f0
+#define SUNXI_TVE_ACTIVE_NUM_COMPOSITE		0x000005a0
+#define SUNXI_TVE_CHROMA_BW_GAIN_COMP		0x00000002
+#define SUNXI_TVE_NOTCH_WIDTH_COMPOSITE		0x00000101
+#define SUNXI_TVE_RESYNC_NUM_PAL		0x800d000c
+#define SUNXI_TVE_RESYNC_NUM_NTSC		0x000e000c
+#define SUNXI_TVE_SLAVE_PARA_COMPOSITE		0x00000000
+
+void tvencoder_mode_set(struct sunxi_tve_reg * const tve, enum tve_mode mode);
+void tvencoder_enable(struct sunxi_tve_reg * const tve);
+
+#endif /* _TVE_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/tzpc.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/tzpc.h
new file mode 100644
index 000000000..7a6fcaebd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/tzpc.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#ifndef _SUNXI_TZPC_H
+#define _SUNXI_TZPC_H
+
+#ifndef __ASSEMBLY__
+struct sunxi_tzpc {
+	u32 r0size;		/* 0x00 Size of secure RAM region */
+	u32 decport0_status;	/* 0x04 Status of decode protection port 0 */
+	u32 decport0_set;	/* 0x08 Set decode protection port 0 */
+	u32 decport0_clear;	/* 0x0c Clear decode protection port 0 */
+	/* For A80 and later SoCs */
+	u32 decport1_status;	/* 0x10 Status of decode protection port 1 */
+	u32 decport1_set;	/* 0x14 Set decode protection port 1 */
+	u32 decport1_clear;	/* 0x18 Clear decode protection port 1 */
+	u32 decport2_status;	/* 0x1c Status of decode protection port 2 */
+	u32 decport2_set;	/* 0x20 Set decode protection port 2 */
+	u32 decport2_clear;	/* 0x24 Clear decode protection port 2 */
+};
+#endif
+
+#define SUN6I_TZPC_DECPORT0_RTC	(1 << 1)
+
+#define SUN8I_H3_TZPC_DECPORT0_ALL  0xbe
+#define SUN8I_H3_TZPC_DECPORT1_ALL  0xff
+#define SUN8I_H3_TZPC_DECPORT2_ALL  0x7f
+
+void tzpc_init(void);
+
+#endif /* _SUNXI_TZPC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-sunxi/watchdog.h b/roms/u-boot/arch/arm/include/asm/arch-sunxi/watchdog.h
new file mode 100644
index 000000000..38e2ef2ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-sunxi/watchdog.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * Watchdog register definitions
+ */
+
+#ifndef _SUNXI_WATCHDOG_H_
+#define _SUNXI_WATCHDOG_H_
+
+#define WDT_CTRL_RESTART	(0x1 << 0)
+#define WDT_CTRL_KEY		(0x0a57 << 1)
+
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN5I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
+
+#define WDT_MODE_EN		(0x1 << 0)
+#define WDT_MODE_RESET_EN	(0x1 << 1)
+
+struct sunxi_wdog {
+	u32 ctl;		/* 0x00 */
+	u32 mode;		/* 0x04 */
+	u32 res[2];
+};
+
+#else
+
+#define WDT_CFG_RESET		(0x1)
+#define WDT_MODE_EN		(0x1)
+
+struct sunxi_wdog {
+	u32 irq_en;		/* 0x00 */
+	u32 irq_sta;		/* 0x04 */
+	u32 res1[2];
+	u32 ctl;		/* 0x10 */
+	u32 cfg;		/* 0x14 */
+	u32 mode;		/* 0x18 */
+	u32 res2;
+};
+
+#endif
+
+#endif /* _SUNXI_WATCHDOG_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/ap.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/ap.h
new file mode 100644
index 000000000..de21dffa5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/ap.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+#include <asm/types.h>
+
+/* Stabilization delays, in usec */
+#define PLL_STABILIZATION_DELAY	(300)
+#define IO_STABILIZATION_DELAY	(1000)
+
+#define PLLX_ENABLED		(1 << 30)
+#define CCLK_BURST_POLICY	0x20008888
+#define SUPER_CCLK_DIVIDER	0x80000000
+
+/* Calculate clock fractional divider value from ref and target frequencies */
+#define CLK_DIVIDER(REF, FREQ)	((((REF) * 2) / FREQ) - 2)
+
+/* Calculate clock frequency value from reference and clock divider value */
+#define CLK_FREQUENCY(REF, REG)	(((REF) * 2) / (REG + 2))
+
+/* AVP/CPU ID */
+#define PG_UP_TAG_0_PID_CPU	0x55555555	/* CPU aka "a9" aka "mpcore" */
+#define PG_UP_TAG_0		0x0
+
+/* AP base physical address of internal SRAM */
+#define NV_PA_BASE_SRAM		0x40000000
+
+#define EXCEP_VECTOR_CPU_RESET_VECTOR	(NV_PA_EVP_BASE + 0x100)
+#define CSITE_CPU_DBG0_LAR		(NV_PA_CSITE_BASE + 0x10FB0)
+#define CSITE_CPU_DBG1_LAR		(NV_PA_CSITE_BASE + 0x12FB0)
+
+#define FLOW_CTLR_HALT_COP_EVENTS	(NV_PA_FLOW_BASE + 4)
+#define FLOW_MODE_STOP			2
+#define HALT_COP_EVENT_JTAG		(1 << 28)
+#define HALT_COP_EVENT_IRQ_1		(1 << 11)
+#define HALT_COP_EVENT_FIQ_1		(1 << 9)
+
+/* This is the main entry into U-Boot, used by the Cortex-A9 */
+extern void _start(void);
+
+/**
+ * Works out the SOC/SKU type used for clocks settings
+ *
+ * @return	SOC type - see TEGRA_SOC...
+ */
+int tegra_get_chip_sku(void);
+
+/**
+ * Returns the pure SOC (chip ID) from the HIDREV register
+ *
+ * @return	SOC ID - see CHIPID_TEGRAxx...
+ */
+int tegra_get_chip(void);
+
+/**
+ * Returns the SKU ID from the sku_info register
+ *
+ * @return	SKU ID - see SKU_ID_Txx...
+ */
+int tegra_get_sku_info(void);
+
+/* Do any chip-specific cache config */
+void config_cache(void);
+
+#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
+bool tegra_cpu_is_non_secure(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/apb_misc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/apb_misc.h
new file mode 100644
index 000000000..d438966af
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/apb_misc.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ */
+
+#ifndef _GP_PADCTRL_H_
+#define _GP_PADCTRL_H_
+
+/* APB_MISC_PP registers */
+struct apb_misc_pp_ctlr {
+	u32	reserved0[2];
+	u32	strapping_opt_a;/* 0x08: APB_MISC_PP_STRAPPING_OPT_A */
+	u32	reserved1[6];	/* 0x0c .. 0x20 */
+	u32	cfg_ctl;	/* 0x24 */
+};
+
+/* bit fields definitions for APB_MISC_PP_STRAPPING_OPT_A register */
+#define RAM_CODE_SHIFT		4
+#define RAM_CODE_MASK		(0xf << RAM_CODE_SHIFT)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/board.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/board.h
new file mode 100644
index 000000000..24d0db8ce
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/board.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA_BOARD_H_
+#define _TEGRA_BOARD_H_
+
+/* Set up pinmux to make UART usable */
+void gpio_early_init_uart(void);
+
+/* Set up early UART output */
+void board_init_uart_f(void);
+
+/* Set up any early GPIOs the board might need for proper operation */
+void gpio_early_init(void);  /* overrideable GPIO config        */
+
+/*
+ * Hooks to allow boards to set up the pinmux for a specific function.
+ * Has to be implemented in the board files as we don't yet support pinmux
+ * setup from FDT. If a board file does not implement one of those functions
+ * an empty stub function will be called.
+ */
+
+void pinmux_init(void);      /* overridable general pinmux setup */
+void pin_mux_usb(void);      /* overridable USB pinmux setup     */
+void pin_mux_spi(void);      /* overridable SPI pinmux setup     */
+void pin_mux_nand(void);     /* overridable NAND pinmux setup    */
+void pin_mux_mmc(void);      /* overridable mmc pinmux setup     */
+void pin_mux_display(void);  /* overridable DISPLAY pinmux setup */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/bpmp_abi.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/bpmp_abi.h
new file mode 100644
index 000000000..373da526e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/bpmp_abi.h
@@ -0,0 +1,1590 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION.
+ */
+
+#ifndef _ABI_BPMP_ABI_H_
+#define _ABI_BPMP_ABI_H_
+
+#ifdef LK
+#include <stdint.h>
+#endif
+
+#ifndef __ABI_PACKED
+#define __ABI_PACKED __attribute__((packed))
+#endif
+
+#ifdef NO_GCC_EXTENSIONS
+#define EMPTY char empty;
+#define EMPTY_ARRAY 1
+#else
+#define EMPTY
+#define EMPTY_ARRAY 0
+#endif
+
+#ifndef __UNION_ANON
+#define __UNION_ANON
+#endif
+/**
+ * @file
+ */
+
+
+/**
+ * @defgroup MRQ MRQ Messages
+ * @brief Messages sent to/from BPMP via IPC
+ * @{
+ *   @defgroup MRQ_Format Message Format
+ *   @defgroup MRQ_Codes Message Request (MRQ) Codes
+ *   @defgroup MRQ_Payloads Message Payloads
+ *   @defgroup Error_Codes Error Codes
+ * @}
+ */
+
+/**
+ * @addtogroup MRQ_Format Message Format
+ * @{
+ * The CPU requests the BPMP to perform a particular service by
+ * sending it an IVC frame containing a single MRQ message. An MRQ
+ * message consists of a @ref mrq_request followed by a payload whose
+ * format depends on mrq_request::mrq.
+ *
+ * The BPMP processes the data and replies with an IVC frame (on the
+ * same IVC channel) containing and MRQ response. An MRQ response
+ * consists of a @ref mrq_response followed by a payload whose format
+ * depends on the associated mrq_request::mrq.
+ *
+ * A well-defined subset of the MRQ messages that the CPU sends to the
+ * BPMP can lead to BPMP eventually sending an MRQ message to the
+ * CPU. For example, when the CPU uses an #MRQ_THERMAL message to set
+ * a thermal trip point, the BPMP may eventually send a single
+ * #MRQ_THERMAL message of its own to the CPU indicating that the trip
+ * point has been crossed.
+ * @}
+ */
+
+/**
+ * @ingroup MRQ_Format
+ * @brief header for an MRQ message
+ *
+ * Provides the MRQ number for the MRQ message: #mrq. The remainder of
+ * the MRQ message is a payload (immediately following the
+ * mrq_request) whose format depends on mrq.
+ *
+ * @todo document the flags
+ */
+struct mrq_request {
+	/** @brief MRQ number of the request */
+	uint32_t mrq;
+	/** @brief flags for the request */
+	uint32_t flags;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Format
+ * @brief header for an MRQ response
+ *
+ *  Provides an error code for the associated MRQ message. The
+ *  remainder of the MRQ response is a payload (immediately following
+ *  the mrq_response) whose format depends on the associated
+ *  mrq_request::mrq
+ *
+ * @todo document the flags
+ */
+struct mrq_response {
+	/** @brief error code for the MRQ request itself */
+	int32_t err;
+	/** @brief flags for the response */
+	uint32_t flags;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Format
+ * Minimum needed size for an IPC message buffer
+ */
+#define MSG_MIN_SZ	128
+/**
+ * @ingroup MRQ_Format
+ *  Minimum size guaranteed for data in an IPC message buffer
+ */
+#define MSG_DATA_MIN_SZ	120
+
+/**
+ * @ingroup MRQ_Codes
+ * @name Legal MRQ codes
+ * These are the legal values for mrq_request::mrq
+ * @{
+ */
+
+#define MRQ_PING		0
+#define MRQ_QUERY_TAG		1
+#define MRQ_MODULE_LOAD		4
+#define MRQ_MODULE_UNLOAD	5
+#define MRQ_TRACE_MODIFY	7
+#define MRQ_WRITE_TRACE		8
+#define MRQ_THREADED_PING	9
+#define MRQ_MODULE_MAIL		11
+#define MRQ_DEBUGFS		19
+#define MRQ_RESET		20
+#define MRQ_I2C			21
+#define MRQ_CLK			22
+#define MRQ_QUERY_ABI		23
+#define MRQ_PG_READ_STATE	25
+#define MRQ_PG_UPDATE_STATE	26
+#define MRQ_THERMAL		27
+#define MRQ_CPU_VHINT		28
+#define MRQ_ABI_RATCHET		29
+#define MRQ_EMC_DVFS_LATENCY	31
+#define MRQ_TRACE_ITER		64
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @brief Maximum MRQ code to be sent by CPU software to
+ * BPMP. Subject to change in future
+ */
+#define MAX_CPU_MRQ_ID		64
+
+/**
+ * @addtogroup MRQ_Payloads Message Payloads
+ * @{
+ *   @defgroup Ping
+ *   @defgroup Query_Tag Query Tag
+ *   @defgroup Module Loadable Modules
+ *   @defgroup Trace
+ *   @defgroup Debugfs
+ *   @defgroup Reset
+ *   @defgroup I2C
+ *   @defgroup Clocks
+ *   @defgroup ABI_info ABI Info
+ *   @defgroup MC_Flush MC Flush
+ *   @defgroup Powergating
+ *   @defgroup Thermal
+ *   @defgroup Vhint CPU Voltage hint
+ *   @defgroup MRQ_Deprecated Deprecated MRQ messages
+ *   @defgroup EMC
+ * @}
+ */
+
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PING
+ * @brief A simple ping
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: @ref mrq_ping_request
+ * * Response Payload: @ref mrq_ping_response
+ *
+ * @ingroup MRQ_Codes
+ * @def MRQ_THREADED_PING
+ * @brief A deeper ping
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_ping_request
+ * * Response Payload: @ref mrq_ping_response
+ *
+ * Behavior is equivalent to a simple #MRQ_PING except that BPMP
+ * responds from a thread context (providing a slightly more robust
+ * sign of life).
+ *
+ */
+
+/**
+ * @ingroup Ping
+ * @brief request with #MRQ_PING
+ *
+ * Used by the sender of an #MRQ_PING message to request a pong from
+ * recipient. The response from the recipient is computed based on
+ * #challenge.
+ */
+struct mrq_ping_request {
+/** @brief arbitrarily chosen value */
+	uint32_t challenge;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Ping
+ * @brief response to #MRQ_PING
+ *
+ * Sent in response to an #MRQ_PING message. #reply should be the
+ * mrq_ping_request challenge left shifted by 1 with the carry-bit
+ * dropped.
+ *
+ */
+struct mrq_ping_response {
+	/** @brief response to the MRQ_PING challege */
+	uint32_t reply;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_QUERY_TAG
+ * @brief Query BPMP firmware's tag (i.e. version information)
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_query_tag_request
+ * * Response Payload: N/A
+ *
+ */
+
+/**
+ * @ingroup Query_Tag
+ * @brief request with #MRQ_QUERY_TAG
+ *
+ * Used by #MRQ_QUERY_TAG call to ask BPMP to fill in the memory
+ * pointed by #addr with BPMP firmware header.
+ *
+ * The sender is reponsible for ensuring that #addr is mapped in to
+ * the recipient's address map.
+ */
+struct mrq_query_tag_request {
+  /** @brief base address to store the firmware header */
+	uint32_t addr;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_LOAD
+ * @brief dynamically load a BPMP code module
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_load_request
+ * * Response Payload: @ref mrq_module_load_response
+ *
+ * @note This MRQ is disabled on production systems
+ *
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_LOAD
+ *
+ * Used by #MRQ_MODULE_LOAD calls to ask the recipient to dynamically
+ * load the code located at #phys_addr and having size #size
+ * bytes. #phys_addr is treated as a void pointer.
+ *
+ * The recipient copies the code from #phys_addr to locally allocated
+ * memory prior to responding to this message.
+ *
+ * @todo document the module header format
+ *
+ * The sender is responsible for ensuring that the code is mapped in
+ * the recipient's address map.
+ *
+ */
+struct mrq_module_load_request {
+	/** @brief base address of the code to load. Treated as (void *) */
+	uint32_t phys_addr; /* (void *) */
+	/** @brief size in bytes of code to load */
+	uint32_t size;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Module
+ * @brief response to #MRQ_MODULE_LOAD
+ *
+ * @todo document mrq_response::err
+ */
+struct mrq_module_load_response {
+	/** @brief handle to the loaded module */
+	uint32_t base;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_UNLOAD
+ * @brief unload a previously loaded code module
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_unload_request
+ * * Response Payload: N/A
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_UNLOAD
+ *
+ * Used by #MRQ_MODULE_UNLOAD calls to request that a previously loaded
+ * module be unloaded.
+ */
+struct mrq_module_unload_request {
+	/** @brief handle of the module to unload */
+	uint32_t base;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_TRACE_MODIFY
+ * @brief modify the set of enabled trace events
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_trace_modify_request
+ * * Response Payload: @ref mrq_trace_modify_response
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Trace
+ * @brief request with #MRQ_TRACE_MODIFY
+ *
+ * Used by %MRQ_TRACE_MODIFY calls to enable or disable specify trace
+ * events.  #set takes precedence for any bit set in both #set and
+ * #clr.
+ */
+struct mrq_trace_modify_request {
+	/** @brief bit mask of trace events to disable */
+	uint32_t clr;
+	/** @brief bit mask of trace events to enable */
+	uint32_t set;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Trace
+ * @brief response to #MRQ_TRACE_MODIFY
+ *
+ * Sent in repsonse to an #MRQ_TRACE_MODIFY message. #mask reflects the
+ * state of which events are enabled after the recipient acted on the
+ * message.
+ *
+ */
+struct mrq_trace_modify_response {
+	/** @brief bit mask of trace event enable states */
+	uint32_t mask;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_WRITE_TRACE
+ * @brief Write trace data to a buffer
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_write_trace_request
+ * * Response Payload: @ref mrq_write_trace_response
+ *
+ * mrq_response::err depends on the @ref mrq_write_trace_request field
+ * values. err is -#BPMP_EINVAL if size is zero or area is NULL or
+ * area is in an illegal range. A positive value for err indicates the
+ * number of bytes written to area.
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Trace
+ * @brief request with #MRQ_WRITE_TRACE
+ *
+ * Used by MRQ_WRITE_TRACE calls to ask the recipient to copy trace
+ * data from the recipient's local buffer to the output buffer. #area
+ * is treated as a byte-aligned pointer in the recipient's address
+ * space.
+ *
+ * The sender is responsible for ensuring that the output
+ * buffer is mapped in the recipient's address map. The recipient is
+ * responsible for protecting its own code and data from accidental
+ * overwrites.
+ */
+struct mrq_write_trace_request {
+	/** @brief base address of output buffer */
+	uint32_t area;
+	/** @brief size in bytes of the output buffer */
+	uint32_t size;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Trace
+ * @brief response to #MRQ_WRITE_TRACE
+ *
+ * Once this response is sent, the respondent will not access the
+ * output buffer further.
+ */
+struct mrq_write_trace_response {
+	/**
+	 * @brief flag whether more data remains in local buffer
+	 *
+	 * Value is 1 if the entire local trace buffer has been
+	 * drained to the outputbuffer. Value is 0 otherwise.
+	 */
+	uint32_t eof;
+} __ABI_PACKED;
+
+/** @private */
+struct mrq_threaded_ping_request {
+	uint32_t challenge;
+} __ABI_PACKED;
+
+/** @private */
+struct mrq_threaded_ping_response {
+	uint32_t reply;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_MAIL
+ * @brief send a message to a loadable module
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_mail_request
+ * * Response Payload: @ref mrq_module_mail_response
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_MAIL
+ */
+struct mrq_module_mail_request {
+	/** @brief handle to the previously loaded module */
+	uint32_t base;
+	/** @brief module-specific mail payload
+	 *
+	 * The length of data[ ] is unknown to the BPMP core firmware
+	 * but it is limited to the size of an IPC message.
+	 */
+	uint8_t data[EMPTY_ARRAY];
+} __ABI_PACKED;
+
+/**
+ * @ingroup Module
+ * @brief response to #MRQ_MODULE_MAIL
+ */
+struct mrq_module_mail_response {
+	/** @brief module-specific mail payload
+	 *
+	 * The length of data[ ] is unknown to the BPMP core firmware
+	 * but it is limited to the size of an IPC message.
+	 */
+	uint8_t data[EMPTY_ARRAY];
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_DEBUGFS
+ * @brief Interact with BPMP's debugfs file nodes
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_debugfs_request
+ * * Response Payload: @ref mrq_debugfs_response
+ */
+
+/**
+ * @addtogroup Debugfs
+ * @{
+ *
+ * The BPMP firmware implements a pseudo-filesystem called
+ * debugfs. Any driver within the firmware may register with debugfs
+ * to expose an arbitrary set of "files" in the filesystem. When
+ * software on the CPU writes to a debugfs file, debugfs passes the
+ * written data to a callback provided by the driver. When software on
+ * the CPU reads a debugfs file, debugfs queries the driver for the
+ * data to return to the CPU. The intention of the debugfs filesystem
+ * is to provide information useful for debugging the system at
+ * runtime.
+ *
+ * @note The files exposed via debugfs are not part of the
+ * BPMP firmware's ABI. debugfs files may be added or removed in any
+ * given version of the firmware. Typically the semantics of a debugfs
+ * file are consistent from version to version but even that is not
+ * guaranteed.
+ *
+ * @}
+ */
+/** @ingroup Debugfs */
+enum mrq_debugfs_commands {
+	CMD_DEBUGFS_READ = 1,
+	CMD_DEBUGFS_WRITE = 2,
+	CMD_DEBUGFS_DUMPDIR = 3,
+	CMD_DEBUGFS_MAX
+};
+
+/**
+ * @ingroup Debugfs
+ * @brief parameters for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_fileop_request {
+	/** @brief physical address pointing at filename */
+	uint32_t fnameaddr;
+	/** @brief length in bytes of filename buffer */
+	uint32_t fnamelen;
+	/** @brief physical address pointing to data buffer */
+	uint32_t dataaddr;
+	/** @brief length in bytes of data buffer */
+	uint32_t datalen;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief parameters for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_dumpdir_request {
+	/** @brief physical address pointing to data buffer */
+	uint32_t dataaddr;
+	/** @brief length in bytes of data buffer */
+	uint32_t datalen;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief response data for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_fileop_response {
+	/** @brief always 0 */
+	uint32_t reserved;
+	/** @brief number of bytes read from or written to data buffer */
+	uint32_t nbytes;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief response data for CMD_DEBUGFS_DUMPDIR command
+ */
+struct cmd_debugfs_dumpdir_response {
+	/** @brief always 0 */
+	uint32_t reserved;
+	/** @brief number of bytes read from or written to data buffer */
+	uint32_t nbytes;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief request with #MRQ_DEBUGFS.
+ *
+ * The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs
+ * command to execute. Legal commands are the values of @ref
+ * mrq_debugfs_commands. Each command requires a specific additional
+ * payload of data.
+ *
+ * |command            |payload|
+ * |-------------------|-------|
+ * |CMD_DEBUGFS_READ   |fop    |
+ * |CMD_DEBUGFS_WRITE  |fop    |
+ * |CMD_DEBUGFS_DUMPDIR|dumpdir|
+ */
+struct mrq_debugfs_request {
+	uint32_t cmd;
+	union {
+		struct cmd_debugfs_fileop_request fop;
+		struct cmd_debugfs_dumpdir_request dumpdir;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ */
+struct mrq_debugfs_response {
+	/** @brief always 0 */
+	int32_t reserved;
+	union {
+		/** @brief response data for CMD_DEBUGFS_READ OR
+		 * CMD_DEBUGFS_WRITE command
+		 */
+		struct cmd_debugfs_fileop_response fop;
+		/** @brief response data for CMD_DEBUGFS_DUMPDIR command */
+		struct cmd_debugfs_dumpdir_response dumpdir;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @addtogroup Debugfs
+ * @{
+ */
+#define DEBUGFS_S_ISDIR	(1 << 9)
+#define DEBUGFS_S_IRUSR	(1 << 8)
+#define DEBUGFS_S_IWUSR	(1 << 7)
+/** @} */
+
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_RESET
+ * @brief reset an IP block
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_reset_request
+ * * Response Payload: N/A
+ */
+
+/**
+ * @ingroup Reset
+ */
+enum mrq_reset_commands {
+	CMD_RESET_ASSERT = 1,
+	CMD_RESET_DEASSERT = 2,
+	CMD_RESET_MODULE = 3,
+	CMD_RESET_MAX, /* not part of ABI and subject to change */
+};
+
+/**
+ * @ingroup Reset
+ * @brief request with MRQ_RESET
+ *
+ * Used by the sender of an #MRQ_RESET message to request BPMP to
+ * assert or or deassert a given reset line.
+ */
+struct mrq_reset_request {
+	/** @brief reset action to perform (@enum mrq_reset_commands) */
+	uint32_t cmd;
+	/** @brief id of the reset to affected */
+	uint32_t reset_id;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_I2C
+ * @brief issue an i2c transaction
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_i2c_request
+ * * Response Payload: @ref mrq_i2c_response
+ */
+
+/**
+ * @addtogroup I2C
+ * @{
+ */
+#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE	(MSG_DATA_MIN_SZ - 12)
+#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE	(MSG_DATA_MIN_SZ - 4)
+/** @} */
+
+/**
+ * @ingroup I2C
+ * @name Serial I2C flags
+ * Use these flags with serial_i2c_request::flags
+ * @{
+ */
+#define SERIALI2C_TEN           0x0010
+#define SERIALI2C_RD            0x0001
+#define SERIALI2C_STOP          0x8000
+#define SERIALI2C_NOSTART       0x4000
+#define SERIALI2C_REV_DIR_ADDR  0x2000
+#define SERIALI2C_IGNORE_NAK    0x1000
+#define SERIALI2C_NO_RD_ACK     0x0800
+#define SERIALI2C_RECV_LEN      0x0400
+/** @} */
+/** @ingroup I2C */
+enum {
+	CMD_I2C_XFER = 1
+};
+
+/**
+ * @ingroup I2C
+ * @brief serializable i2c request
+ *
+ * Instances of this structure are packed (little-endian) into
+ * cmd_i2c_xfer_request::data_buf. Each instance represents a single
+ * transaction (or a portion of a transaction with repeated starts) on
+ * an i2c bus.
+ *
+ * Because these structures are packed, some instances are likely to
+ * be misaligned. Additionally because #data is variable length, it is
+ * not possible to iterate through a serialized list of these
+ * structures without inspecting #len in each instance.  It may be
+ * easier to serialize or deserialize cmd_i2c_xfer_request::data_buf
+ * manually rather than using this structure definition.
+*/
+struct serial_i2c_request {
+	/** @brief I2C slave address */
+	uint16_t addr;
+	/** @brief bitmask of SERIALI2C_ flags */
+	uint16_t flags;
+	/** @brief length of I2C transaction in bytes */
+	uint16_t len;
+	/** @brief for write transactions only, #len bytes of data */
+	uint8_t data[];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief trigger one or more i2c transactions
+ */
+struct cmd_i2c_xfer_request {
+	/** @brief valid bus number from mach-t186/i2c-t186.h*/
+	uint32_t bus_id;
+
+	/** @brief count of valid bytes in #data_buf*/
+	uint32_t data_size;
+
+	/** @brief serialized packed instances of @ref serial_i2c_request*/
+	uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief container for data read from the i2c bus
+ *
+ * Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute
+ * zero or more I2C reads. The data read from the bus is serialized
+ * into #data_buf.
+ */
+struct cmd_i2c_xfer_response {
+	/** @brief count of valid bytes in #data_buf*/
+	uint32_t data_size;
+	/** @brief i2c read data */
+	uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief request with #MRQ_I2C
+ */
+struct mrq_i2c_request {
+	/** @brief always CMD_I2C_XFER (i.e. 1) */
+	uint32_t cmd;
+	/** @brief parameters of the transfer request */
+	struct cmd_i2c_xfer_request xfer;
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief response to #MRQ_I2C
+ */
+struct mrq_i2c_response {
+	struct cmd_i2c_xfer_response xfer;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_CLK
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_clk_request
+ * * Response Payload: @ref mrq_clk_response
+ * @addtogroup Clocks
+ * @{
+ */
+
+/**
+ * @name MRQ_CLK sub-commands
+ * @{
+ */
+enum {
+	CMD_CLK_GET_RATE = 1,
+	CMD_CLK_SET_RATE = 2,
+	CMD_CLK_ROUND_RATE = 3,
+	CMD_CLK_GET_PARENT = 4,
+	CMD_CLK_SET_PARENT = 5,
+	CMD_CLK_IS_ENABLED = 6,
+	CMD_CLK_ENABLE = 7,
+	CMD_CLK_DISABLE = 8,
+	CMD_CLK_GET_ALL_INFO = 14,
+	CMD_CLK_GET_MAX_CLK_ID = 15,
+	CMD_CLK_MAX,
+};
+/** @} */
+
+#define MRQ_CLK_NAME_MAXLEN	40
+#define MRQ_CLK_MAX_PARENTS	16
+
+/** @private */
+struct cmd_clk_get_rate_request {
+	EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_rate_response {
+	int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_set_rate_request {
+	int32_t unused;
+	int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_set_rate_response {
+	int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_round_rate_request {
+	int32_t unused;
+	int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_round_rate_response {
+	int64_t rate;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_parent_request {
+	EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_parent_response {
+	uint32_t parent_id;
+} __ABI_PACKED;
+
+struct cmd_clk_set_parent_request {
+	uint32_t parent_id;
+} __ABI_PACKED;
+
+struct cmd_clk_set_parent_response {
+	uint32_t parent_id;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_is_enabled_request {
+	EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_is_enabled_response {
+	int32_t state;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_enable_request {
+	EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_enable_response {
+	EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_disable_request {
+	EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_disable_response {
+	EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_all_info_request {
+	EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_all_info_response {
+	uint32_t flags;
+	uint32_t parent;
+	uint32_t parents[MRQ_CLK_MAX_PARENTS];
+	uint8_t num_parents;
+	uint8_t name[MRQ_CLK_NAME_MAXLEN];
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_max_clk_id_request {
+	EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_max_clk_id_response {
+	uint32_t max_id;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup Clocks
+ * @brief request with #MRQ_CLK
+ *
+ * Used by the sender of an #MRQ_CLK message to control clocks. The
+ * clk_request is split into several sub-commands. Some sub-commands
+ * require no additional data. Others have a sub-command specific
+ * payload
+ *
+ * |sub-command                 |payload                |
+ * |----------------------------|-----------------------|
+ * |CMD_CLK_GET_RATE            |-                      |
+ * |CMD_CLK_SET_RATE            |clk_set_rate           |
+ * |CMD_CLK_ROUND_RATE          |clk_round_rate         |
+ * |CMD_CLK_GET_PARENT          |-                      |
+ * |CMD_CLK_SET_PARENT          |clk_set_parent         |
+ * |CMD_CLK_IS_ENABLED          |-                      |
+ * |CMD_CLK_ENABLE              |-                      |
+ * |CMD_CLK_DISABLE             |-                      |
+ * |CMD_CLK_GET_ALL_INFO        |-                      |
+ * |CMD_CLK_GET_MAX_CLK_ID      |-                      |
+ *
+ */
+
+struct mrq_clk_request {
+	/** @brief sub-command and clock id concatenated to 32-bit word.
+	 * - bits[31..24] is the sub-cmd.
+	 * - bits[23..0] is the clock id
+	 */
+	uint32_t cmd_and_id;
+
+	union {
+		/** @private */
+		struct cmd_clk_get_rate_request clk_get_rate;
+		struct cmd_clk_set_rate_request clk_set_rate;
+		struct cmd_clk_round_rate_request clk_round_rate;
+		/** @private */
+		struct cmd_clk_get_parent_request clk_get_parent;
+		struct cmd_clk_set_parent_request clk_set_parent;
+		/** @private */
+		struct cmd_clk_enable_request clk_enable;
+		/** @private */
+		struct cmd_clk_disable_request clk_disable;
+		/** @private */
+		struct cmd_clk_is_enabled_request clk_is_enabled;
+		/** @private */
+		struct cmd_clk_get_all_info_request clk_get_all_info;
+		/** @private */
+		struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Clocks
+ * @brief response to MRQ_CLK
+ *
+ * Each sub-command supported by @ref mrq_clk_request may return
+ * sub-command-specific data. Some do and some do not as indicated in
+ * the following table
+ *
+ * |sub-command                 |payload                 |
+ * |----------------------------|------------------------|
+ * |CMD_CLK_GET_RATE            |clk_get_rate            |
+ * |CMD_CLK_SET_RATE            |clk_set_rate            |
+ * |CMD_CLK_ROUND_RATE          |clk_round_rate          |
+ * |CMD_CLK_GET_PARENT          |clk_get_parent          |
+ * |CMD_CLK_SET_PARENT          |clk_set_parent          |
+ * |CMD_CLK_IS_ENABLED          |clk_is_enabled          |
+ * |CMD_CLK_ENABLE              |-                       |
+ * |CMD_CLK_DISABLE             |-                       |
+ * |CMD_CLK_GET_ALL_INFO        |clk_get_all_info        |
+ * |CMD_CLK_GET_MAX_CLK_ID      |clk_get_max_id          |
+ *
+ */
+
+struct mrq_clk_response {
+	union {
+		struct cmd_clk_get_rate_response clk_get_rate;
+		struct cmd_clk_set_rate_response clk_set_rate;
+		struct cmd_clk_round_rate_response clk_round_rate;
+		struct cmd_clk_get_parent_response clk_get_parent;
+		struct cmd_clk_set_parent_response clk_set_parent;
+		/** @private */
+		struct cmd_clk_enable_response clk_enable;
+		/** @private */
+		struct cmd_clk_disable_response clk_disable;
+		struct cmd_clk_is_enabled_response clk_is_enabled;
+		struct cmd_clk_get_all_info_response clk_get_all_info;
+		struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_QUERY_ABI
+ * @brief check if an MRQ is implemented
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: @ref mrq_query_abi_request
+ * * Response Payload: @ref mrq_query_abi_response
+ */
+
+/**
+ * @ingroup ABI_info
+ * @brief request with MRQ_QUERY_ABI
+ *
+ * Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported
+ * by the recipient.
+ */
+struct mrq_query_abi_request {
+	/** @brief MRQ code to query */
+	uint32_t mrq;
+} __ABI_PACKED;
+
+/**
+ * @ingroup ABI_info
+ * @brief response to MRQ_QUERY_ABI
+ */
+struct mrq_query_abi_response {
+	/** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
+	int32_t status;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PG_READ_STATE
+ * @brief read the power-gating state of a partition
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pg_read_state_request
+ * * Response Payload: @ref mrq_pg_read_state_response
+ * @addtogroup Powergating
+ * @{
+ */
+
+/**
+ * @brief request with #MRQ_PG_READ_STATE
+ *
+ * Used by MRQ_PG_READ_STATE call to read the current state of a
+ * partition.
+ */
+struct mrq_pg_read_state_request {
+	/** @brief ID of partition */
+	uint32_t partition_id;
+} __ABI_PACKED;
+
+/**
+ * @brief response to MRQ_PG_READ_STATE
+ * @todo define possible errors.
+ */
+struct mrq_pg_read_state_response {
+	/** @brief read as don't care */
+	uint32_t sram_state;
+	/** @brief state of power partition
+	 * * 0 : off
+	 * * 1 : on
+	 */
+	uint32_t logic_state;
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PG_UPDATE_STATE
+ * @brief modify the power-gating state of a partition
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pg_update_state_request
+ * * Response Payload: N/A
+ * @addtogroup Powergating
+ * @{
+ */
+
+/**
+ * @brief request with mrq_pg_update_state_request
+ *
+ * Used by #MRQ_PG_UPDATE_STATE call to request BPMP to change the
+ * state of a power partition #partition_id.
+ */
+struct mrq_pg_update_state_request {
+	/** @brief ID of partition */
+	uint32_t partition_id;
+	/** @brief secondary control of power partition
+	 *  @details Ignored by many versions of the BPMP
+	 *  firmware. For maximum compatibility, set the value
+	 *  according to @logic_state
+	 * *  0x1: power ON partition (@ref logic_state == 0x3)
+	 * *  0x3: power OFF partition (@ref logic_state == 0x1)
+	 */
+	uint32_t sram_state;
+	/** @brief controls state of power partition, legal values are
+	 * *  0x1 : power OFF partition
+	 * *  0x3 : power ON partition
+	 */
+	uint32_t logic_state;
+	/** @brief change state of clocks of the power partition, legal values
+	 * *  0x0 : do not change clock state
+	 * *  0x1 : disable partition clocks (only applicable when
+	 *          @ref logic_state == 0x1)
+	 * *  0x3 : enable partition clocks (only applicable when
+	 *          @ref logic_state == 0x3)
+	 */
+	uint32_t clock_state;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_THERMAL
+ * @brief interact with BPMP thermal framework
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: TODO
+ * * Response Payload: TODO
+ *
+ * @addtogroup Thermal
+ *
+ * The BPMP firmware includes a thermal framework. Drivers within the
+ * bpmp firmware register with the framework to provide thermal
+ * zones. Each thermal zone corresponds to an entity whose temperature
+ * can be measured. The framework also has a notion of trip points. A
+ * trip point consists of a thermal zone id, a temperature, and a
+ * callback routine. The framework invokes the callback when the zone
+ * hits the indicated temperature. The BPMP firmware uses this thermal
+ * framework interally to implement various temperature-dependent
+ * functions.
+ *
+ * Software on the CPU can use #MRQ_THERMAL (with payload @ref
+ * mrq_thermal_host_to_bpmp_request) to interact with the BPMP thermal
+ * framework. The CPU must It can query the number of supported zones,
+ * query zone temperatures, and set trip points.
+ *
+ * When a trip point set by the CPU gets crossed, BPMP firmware issues
+ * an IPC to the CPU having mrq_request::mrq = #MRQ_THERMAL and a
+ * payload of @ref mrq_thermal_bpmp_to_host_request.
+ * @{
+ */
+enum mrq_thermal_host_to_bpmp_cmd {
+	/**
+	 * @brief Check whether the BPMP driver supports the specified
+	 * request type.
+	 *
+	 * Host needs to supply request parameters.
+	 *
+	 * mrq_response::err is 0 if the specified request is
+	 * supported and -#BPMP_ENODEV otherwise.
+	 */
+	CMD_THERMAL_QUERY_ABI = 0,
+
+	/**
+	 * @brief Get the current temperature of the specified zone.
+	 *
+	 * Host needs to supply request parameters.
+	 *
+	 * mrq_response::err is
+	 * *  0: Temperature query succeeded.
+	 * *  -#BPMP_EINVAL: Invalid request parameters.
+	 * *  -#BPMP_ENOENT: No driver registered for thermal zone..
+	 * *  -#BPMP_EFAULT: Problem reading temperature measurement.
+	 */
+	CMD_THERMAL_GET_TEMP = 1,
+
+	/**
+	 * @brief Enable or disable and set the lower and upper
+	 *   thermal limits for a thermal trip point. Each zone has
+	 *   one trip point.
+	 *
+	 * Host needs to supply request parameters. Once the
+	 * temperature hits a trip point, the BPMP will send a message
+	 * to the CPU having MRQ=MRQ_THERMAL and
+	 * type=CMD_THERMAL_HOST_TRIP_REACHED
+	 *
+	 * mrq_response::err is
+	 * *  0: Trip successfully set.
+	 * *  -#BPMP_EINVAL: Invalid request parameters.
+	 * *  -#BPMP_ENOENT: No driver registered for thermal zone.
+	 * *  -#BPMP_EFAULT: Problem setting trip point.
+	 */
+	CMD_THERMAL_SET_TRIP = 2,
+
+	/**
+	 * @brief Get the number of supported thermal zones.
+	 *
+	 * No request parameters required.
+	 *
+	 * mrq_response::err is always 0, indicating success.
+	 */
+	CMD_THERMAL_GET_NUM_ZONES = 3,
+
+	/** @brief: number of supported host-to-bpmp commands. May
+	 * increase in future
+	 */
+	CMD_THERMAL_HOST_TO_BPMP_NUM
+};
+
+enum mrq_thermal_bpmp_to_host_cmd {
+	/**
+	 * @brief Indication that the temperature for a zone has
+	 *   exceeded the range indicated in the thermal trip point
+	 *   for the zone.
+	 *
+	 * BPMP needs to supply request parameters. Host only needs to
+	 * acknowledge.
+	 */
+	CMD_THERMAL_HOST_TRIP_REACHED = 100,
+
+	/** @brief: number of supported bpmp-to-host commands. May
+	 * increase in future
+	 */
+	CMD_THERMAL_BPMP_TO_HOST_NUM
+};
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_QUERY_ABI
+ *
+ * zone: Request type for which to check existence.
+ */
+struct cmd_thermal_query_abi_request {
+	uint32_t type;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_GET_TEMP
+ *
+ * zone: Number of thermal zone.
+ */
+struct cmd_thermal_get_temp_request {
+	uint32_t zone;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host reply data for request CMD_THERMAL_GET_TEMP
+ *
+ * error: 0 if request succeeded.
+ *	-BPMP_EINVAL if request parameters were invalid.
+ *      -BPMP_ENOENT if no driver was registered for the specified thermal zone.
+ *      -BPMP_EFAULT for other thermal zone driver errors.
+ * temp: Current temperature in millicelsius.
+ */
+struct cmd_thermal_get_temp_response {
+	int32_t temp;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_SET_TRIP
+ *
+ * zone: Number of thermal zone.
+ * low: Temperature of lower trip point in millicelsius
+ * high: Temperature of upper trip point in millicelsius
+ * enabled: 1 to enable trip point, 0 to disable trip point
+ */
+struct cmd_thermal_set_trip_request {
+	uint32_t zone;
+	int32_t low;
+	int32_t high;
+	uint32_t enabled;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host request data for request type CMD_THERMAL_HOST_TRIP_REACHED
+ *
+ * zone: Number of thermal zone where trip point was reached.
+ */
+struct cmd_thermal_host_trip_reached_request {
+	uint32_t zone;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host reply data for request type CMD_THERMAL_GET_NUM_ZONES
+ *
+ * num: Number of supported thermal zones. The thermal zones are indexed
+ *      starting from zero.
+ */
+struct cmd_thermal_get_num_zones_response {
+	uint32_t num;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data.
+ *
+ * Reply type is union mrq_thermal_bpmp_to_host_response.
+ *
+ * type: Type of request. Values listed in enum mrq_thermal_type.
+ * data: Request type specific parameters.
+ */
+struct mrq_thermal_host_to_bpmp_request {
+	uint32_t type;
+	union {
+		struct cmd_thermal_query_abi_request query_abi;
+		struct cmd_thermal_get_temp_request get_temp;
+		struct cmd_thermal_set_trip_request set_trip;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host request data.
+ *
+ * type: Type of request. Values listed in enum mrq_thermal_type.
+ * data: Request type specific parameters.
+ */
+struct mrq_thermal_bpmp_to_host_request {
+	uint32_t type;
+	union {
+		struct cmd_thermal_host_trip_reached_request host_trip_reached;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
+/*
+ * Data in reply to a Host->BPMP request.
+ */
+union mrq_thermal_bpmp_to_host_response {
+	struct cmd_thermal_get_temp_response get_temp;
+	struct cmd_thermal_get_num_zones_response get_num_zones;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_CPU_VHINT
+ * @brief Query CPU voltage hint data
+ *
+ * * Platforms: T186
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_cpu_vhint_request
+ * * Response Payload: N/A
+ *
+ * @addtogroup Vhint CPU Voltage hint
+ * @{
+ */
+
+/**
+ * @brief request with #MRQ_CPU_VHINT
+ *
+ * Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data
+ * from BPMP to memory space pointed by #addr. CCPLEX is responsible
+ * to allocate sizeof(cpu_vhint_data) sized block of memory and
+ * appropriately map it for BPMP before sending the request.
+ */
+struct mrq_cpu_vhint_request {
+	/** @brief IOVA address for the #cpu_vhint_data */
+	uint32_t addr; /* struct cpu_vhint_data * */
+	/** @brief ID of the cluster whose data is requested */
+	uint32_t cluster_id; /* enum cluster_id */
+} __ABI_PACKED;
+
+/**
+ * @brief description of the CPU v/f relation
+ *
+ * Used by #MRQ_CPU_VHINT call to carry data pointed by #addr of
+ * struct mrq_cpu_vhint_request
+ */
+struct cpu_vhint_data {
+	uint32_t ref_clk_hz; /**< reference frequency in Hz */
+	uint16_t pdiv; /**< post divider value */
+	uint16_t mdiv; /**< input divider value */
+	uint16_t ndiv_max; /**< fMAX expressed with max NDIV value */
+	/** table of ndiv values as a function of vINDEX (voltage index) */
+	uint16_t ndiv[80];
+	/** minimum allowed NDIV value */
+	uint16_t ndiv_min;
+	/** minimum allowed voltage hint value (as in vINDEX) */
+	uint16_t vfloor;
+	/** maximum allowed voltage hint value (as in vINDEX) */
+	uint16_t vceil;
+	/** post-multiplier for vindex value */
+	uint16_t vindex_mult;
+	/** post-divider for vindex value */
+	uint16_t vindex_div;
+	/** reserved for future use */
+	uint16_t reserved[328];
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_ABI_RATCHET
+ * @brief ABI ratchet value query
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_abi_ratchet_request
+ * * Response Payload: @ref mrq_abi_ratchet_response
+ * @addtogroup ABI_info
+ * @{
+ */
+
+/**
+ * @brief an ABI compatibility mechanism
+ *
+ * BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
+ * revision of this header file.
+ * 1. That future revision deprecates some MRQ
+ * 2. That future revision introduces a breaking change to an existing
+ *    MRQ or
+ * 3. A bug is discovered in an existing implementation of the BPMP-FW
+ *    (or possibly one of its clients) which warrants deprecating that
+ *    implementation.
+ */
+#define BPMP_ABI_RATCHET_VALUE 3
+
+/**
+ * @brief request with #MRQ_ABI_RATCHET.
+ *
+ * #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header
+ * against which the requester was compiled.
+ *
+ * If ratchet is less than BPMP's #BPMP_ABI_RATCHET_VALUE, BPMP may
+ * reply with mrq_response::err = -#BPMP_ERANGE to indicate that
+ * BPMP-FW cannot interoperate correctly with the requester. Requester
+ * should cease further communication with BPMP.
+ *
+ * Otherwise, err shall be 0.
+ */
+struct mrq_abi_ratchet_request {
+	/** @brief requester's ratchet value */
+	uint16_t ratchet;
+};
+
+/**
+ * @brief response to #MRQ_ABI_RATCHET
+ *
+ * #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header
+ * against which BPMP firwmare was compiled.
+ *
+ * If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE,
+ * the requster must either interoperate with BPMP according to an ABI
+ * header version with BPMP_ABI_RATCHET_VALUE = ratchet or cease
+ * communication with BPMP.
+ *
+ * If mrq_response::err is 0 and ratchet is greater than or equal to the
+ * requester's BPMP_ABI_RATCHET_VALUE, the requester should continue
+ * normal operation.
+ */
+struct mrq_abi_ratchet_response {
+	/** @brief BPMP's ratchet value */
+	uint16_t ratchet;
+};
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_EMC_DVFS_LATENCY
+ * @brief query frequency dependent EMC DVFS latency
+ *
+ * * Platforms: T186
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: N/A
+ * * Response Payload: @ref mrq_emc_dvfs_latency_response
+ * @addtogroup EMC
+ * @{
+ */
+
+/**
+ * @brief used by @ref mrq_emc_dvfs_latency_response
+ */
+struct emc_dvfs_latency {
+	/** @brief EMC frequency in kHz */
+	uint32_t freq;
+	/** @brief EMC DVFS latency in nanoseconds */
+	uint32_t latency;
+} __ABI_PACKED;
+
+#define EMC_DVFS_LATENCY_MAX_SIZE	14
+/**
+ * @brief response to #MRQ_EMC_DVFS_LATENCY
+ */
+struct mrq_emc_dvfs_latency_response {
+	/** @brief the number valid entries in #pairs */
+	uint32_t num_pairs;
+	/** @brief EMC <frequency, latency> information */
+	struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE];
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_TRACE_ITER
+ * @brief manage the trace iterator
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: N/A
+ * * Response Payload: @ref mrq_trace_iter_request
+ * @addtogroup Trace
+ * @{
+ */
+enum {
+	/** @brief (re)start the tracing now. Ignore older events */
+	TRACE_ITER_INIT = 0,
+	/** @brief clobber all events in the trace buffer */
+	TRACE_ITER_CLEAN = 1
+};
+
+/**
+ * @brief request with #MRQ_TRACE_ITER
+ */
+struct mrq_trace_iter_request {
+	/** @brief TRACE_ITER_INIT or TRACE_ITER_CLEAN */
+	uint32_t cmd;
+} __ABI_PACKED;
+
+/** @} */
+
+/*
+ *  4. Enumerations
+ */
+
+/*
+ *   4.1 CPU enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ *
+ *   4.2 CPU Cluster enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ *
+ *   4.3 System low power state enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ */
+
+/*
+ *   4.4 Clock enumerations
+ *
+ * For clock enumerations, see <mach-t186/clk-t186.h>
+ */
+
+/*
+ *   4.5 Reset enumerations
+ *
+ * For reset enumerations, see <mach-t186/reset-t186.h>
+ */
+
+/*
+ *   4.6 Thermal sensor enumerations
+ *
+ * For thermal sensor enumerations, see <mach-t186/thermal-t186.h>
+ */
+
+/**
+ * @defgroup Error_Codes
+ * Negative values for mrq_response::err generally indicate some
+ * error. The ABI defines the following error codes. Negating these
+ * defines is an exercise left to the user.
+ * @{
+ */
+/** @brief No such file or directory */
+#define BPMP_ENOENT	2
+/** @brief No MRQ handler */
+#define BPMP_ENOHANDLER	3
+/** @brief I/O error */
+#define BPMP_EIO	5
+/** @brief Bad sub-MRQ command */
+#define BPMP_EBADCMD	6
+/** @brief Not enough memory */
+#define BPMP_ENOMEM	12
+/** @brief Permission denied */
+#define BPMP_EACCES	13
+/** @brief Bad address */
+#define BPMP_EFAULT	14
+/** @brief No such device */
+#define BPMP_ENODEV	19
+/** @brief Argument is a directory */
+#define BPMP_EISDIR	21
+/** @brief Invalid argument */
+#define BPMP_EINVAL	22
+/** @brief Timeout during operation */
+#define BPMP_ETIMEDOUT  23
+/** @brief Out of range */
+#define BPMP_ERANGE	34
+/** @} */
+/** @} */
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/cboot.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/cboot.h
new file mode 100644
index 000000000..4e1da98d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/cboot.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2019 NVIDIA Corporation. All rights reserved.
+ */
+
+#ifndef _TEGRA_CBOOT_H_
+#define _TEGRA_CBOOT_H_
+
+#include <net.h>
+
+#ifdef CONFIG_ARM64
+
+extern unsigned long cboot_boot_x0;
+
+void cboot_save_boot_params(unsigned long x0, unsigned long x1,
+			    unsigned long x2, unsigned long x3);
+int cboot_dram_init(void);
+int cboot_dram_init_banksize(void);
+ulong cboot_get_usable_ram_top(ulong total_size);
+int cboot_get_ethaddr(const void *fdt, uint8_t mac[ETH_ALEN]);
+#else
+static inline void cboot_save_boot_params(unsigned long x0, unsigned long x1,
+					  unsigned long x2, unsigned long x3)
+{
+}
+
+static inline int cboot_dram_init(void)
+{
+	return -ENOSYS;
+}
+
+static inline int cboot_dram_init_banksize(void)
+{
+	return -ENOSYS;
+}
+
+static inline ulong cboot_get_usable_ram_top(ulong total_size)
+{
+	return 0;
+}
+
+static inline int cboot_get_ethaddr(const void *fdt, uint8_t mac[ETH_ALEN])
+{
+	return -ENOSYS;
+}
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/clk_rst.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/clk_rst.h
new file mode 100644
index 000000000..2359e142f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/clk_rst.h
@@ -0,0 +1,451 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010-2014
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA_CLK_RST_H_
+#define _TEGRA_CLK_RST_H_
+
+/* PLL registers - there are several PLLs in the clock controller */
+struct clk_pll {
+	uint pll_base;		/* the control register */
+	/* pll_out[0] is output A control, pll_out[1] is output B control */
+	uint pll_out[2];
+	uint pll_misc;		/* other misc things */
+};
+
+/* PLL registers - there are several PLLs in the clock controller */
+struct clk_pll_simple {
+	uint pll_base;		/* the control register */
+	uint pll_misc;		/* other misc things */
+};
+
+struct clk_pllm {
+	uint pllm_base;		/* the control register */
+	uint pllm_out;		/* output control */
+	uint pllm_misc1;	/* misc1 */
+	uint pllm_misc2;	/* misc2 */
+};
+
+/* RST_DEV_(L,H,U,V,W)_(SET,CLR) and CLK_ENB_(L,H,U,V,W)_(SET,CLR) */
+struct clk_set_clr {
+	uint set;
+	uint clr;
+};
+
+/*
+ * Most PLLs use the clk_pll structure, but some have a simpler two-member
+ * structure for which we use clk_pll_simple. The reason for this non-
+ * othogonal setup is not stated.
+ */
+enum {
+	TEGRA_CLK_PLLS		= 6,	/* Number of normal PLLs */
+	TEGRA_CLK_SIMPLE_PLLS	= 3,	/* Number of simple PLLs */
+	TEGRA_CLK_REGS		= 3,	/* Number of clock enable regs L/H/U */
+	TEGRA_CLK_SOURCES	= 64,	/* Number of ppl clock sources L/H/U */
+	TEGRA_CLK_REGS_VW	= 2,	/* Number of clock enable regs V/W */
+	TEGRA_CLK_SOURCES_VW	= 32,	/* Number of ppl clock sources V/W */
+	TEGRA_CLK_SOURCES_X	= 32,	/* Number of ppl clock sources X */
+	TEGRA_CLK_SOURCES_Y	= 18,	/* Number of ppl clock sources Y */
+};
+
+/* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */
+struct clk_rst_ctlr {
+	uint crc_rst_src;			/* _RST_SOURCE_0,0x00 */
+	uint crc_rst_dev[TEGRA_CLK_REGS];	/* _RST_DEVICES_L/H/U_0 */
+	uint crc_clk_out_enb[TEGRA_CLK_REGS];	/* _CLK_OUT_ENB_L/H/U_0 */
+	uint crc_reserved0;		/* reserved_0,		0x1C */
+	uint crc_cclk_brst_pol;		/* _CCLK_BURST_POLICY_0, 0x20 */
+	uint crc_super_cclk_div;	/* _SUPER_CCLK_DIVIDER_0,0x24 */
+	uint crc_sclk_brst_pol;		/* _SCLK_BURST_POLICY_0, 0x28 */
+	uint crc_super_sclk_div;	/* _SUPER_SCLK_DIVIDER_0,0x2C */
+	uint crc_clk_sys_rate;		/* _CLK_SYSTEM_RATE_0,	0x30 */
+	uint crc_prog_dly_clk;		/* _PROG_DLY_CLK_0,	0x34 */
+	uint crc_aud_sync_clk_rate;	/* _AUDIO_SYNC_CLK_RATE_0,0x38 */
+	uint crc_reserved1;		/* reserved_1,		0x3C */
+	uint crc_cop_clk_skip_plcy;	/* _COP_CLK_SKIP_POLICY_0,0x40 */
+	uint crc_clk_mask_arm;		/* _CLK_MASK_ARM_0,	0x44 */
+	uint crc_misc_clk_enb;		/* _MISC_CLK_ENB_0,	0x48 */
+	uint crc_clk_cpu_cmplx;		/* _CLK_CPU_CMPLX_0,	0x4C */
+	uint crc_osc_ctrl;		/* _OSC_CTRL_0,		0x50 */
+	uint crc_pll_lfsr;		/* _PLL_LFSR_0,		0x54 */
+	uint crc_osc_freq_det;		/* _OSC_FREQ_DET_0,	0x58 */
+	uint crc_osc_freq_det_stat;	/* _OSC_FREQ_DET_STATUS_0,0x5C */
+	uint crc_reserved2[8];		/* reserved_2[8],	0x60-7C */
+
+	struct clk_pll crc_pll[TEGRA_CLK_PLLS];	/* PLLs from 0x80 to 0xdc */
+
+	/* PLLs from 0xe0 to 0xf4    */
+	struct clk_pll_simple crc_pll_simple[TEGRA_CLK_SIMPLE_PLLS];
+
+	uint crc_reserved10;		/* _reserved_10,	0xF8 */
+	uint crc_reserved11;		/* _reserved_11,	0xFC */
+
+	uint crc_clk_src[TEGRA_CLK_SOURCES]; /*_I2S1_0...	0x100-1fc */
+
+	uint crc_reserved20[32];	/* _reserved_20,	0x200-27c */
+
+	uint crc_clk_out_enb_x;		/* _CLK_OUT_ENB_X_0,	0x280 */
+	uint crc_clk_enb_x_set;		/* _CLK_ENB_X_SET_0,	0x284 */
+	uint crc_clk_enb_x_clr;		/* _CLK_ENB_X_CLR_0,	0x288 */
+
+	uint crc_rst_devices_x;		/* _RST_DEVICES_X_0,	0x28c */
+	uint crc_rst_dev_x_set;		/* _RST_DEV_X_SET_0,	0x290 */
+	uint crc_rst_dev_x_clr;		/* _RST_DEV_X_CLR_0,	0x294 */
+
+	uint crc_clk_out_enb_y;		/* _CLK_OUT_ENB_Y_0,	0x298 */
+	uint crc_clk_enb_y_set;		/* _CLK_ENB_Y_SET_0,	0x29c */
+	uint crc_clk_enb_y_clr;		/* _CLK_ENB_Y_CLR_0,	0x2a0 */
+
+	uint crc_rst_devices_y;		/* _RST_DEVICES_Y_0,	0x2a4 */
+	uint crc_rst_dev_y_set;		/* _RST_DEV_Y_SET_0,	0x2a8 */
+	uint crc_rst_dev_y_clr;		/* _RST_DEV_Y_CLR_0,	0x2ac */
+
+	uint crc_reserved21[17];	/* _reserved_21,	0x2b0-2f0 */
+
+	uint crc_dfll_base;		/* _DFLL_BASE_0,	0x2f4 */
+
+	uint crc_reserved22[2];		/* _reserved_22,	0x2f8-2fc */
+
+	/* _RST_DEV_L/H/U_SET_0 0x300 ~ 0x314 */
+	struct clk_set_clr crc_rst_dev_ex[TEGRA_CLK_REGS];
+
+	uint crc_reserved30[2];		/* _reserved_30,	0x318, 0x31c */
+
+	/* _CLK_ENB_L/H/U_CLR_0 0x320 ~ 0x334 */
+	struct clk_set_clr crc_clk_enb_ex[TEGRA_CLK_REGS];
+
+	uint crc_reserved31[2];		/* _reserved_31,	0x338, 0x33c */
+
+	uint crc_cpu_cmplx_set;		/* _RST_CPU_CMPLX_SET_0,    0x340 */
+	uint crc_cpu_cmplx_clr;		/* _RST_CPU_CMPLX_CLR_0,    0x344 */
+
+	/* Additional (T30) registers */
+	uint crc_clk_cpu_cmplx_set;	/* _CLK_CPU_CMPLX_SET_0,    0x348 */
+	uint crc_clk_cpu_cmplx_clr;	/* _CLK_CPU_CMPLX_SET_0,    0x34c */
+
+	uint crc_reserved32[2];		/* _reserved_32,      0x350,0x354 */
+
+	uint crc_rst_dev_vw[TEGRA_CLK_REGS_VW]; /* _RST_DEVICES_V/W_0 */
+	uint crc_clk_out_enb_vw[TEGRA_CLK_REGS_VW]; /* _CLK_OUT_ENB_V/W_0 */
+	uint crc_cclkg_brst_pol;	/* _CCLKG_BURST_POLICY_0,   0x368 */
+	uint crc_super_cclkg_div;	/* _SUPER_CCLKG_DIVIDER_0,  0x36C */
+	uint crc_cclklp_brst_pol;	/* _CCLKLP_BURST_POLICY_0,  0x370 */
+	uint crc_super_cclkp_div;	/* _SUPER_CCLKLP_DIVIDER_0, 0x374 */
+	uint crc_clk_cpug_cmplx;	/* _CLK_CPUG_CMPLX_0,       0x378 */
+	uint crc_clk_cpulp_cmplx;	/* _CLK_CPULP_CMPLX_0,      0x37C */
+	uint crc_cpu_softrst_ctrl;	/* _CPU_SOFTRST_CTRL_0,     0x380 */
+	uint crc_cpu_softrst_ctrl1;	/* _CPU_SOFTRST_CTRL1_0,    0x384 */
+	uint crc_cpu_softrst_ctrl2;	/* _CPU_SOFTRST_CTRL2_0,    0x388 */
+	uint crc_reserved33[9];		/* _reserved_33,        0x38c-3ac */
+	uint crc_clk_src_vw[TEGRA_CLK_SOURCES_VW];	/* 0x3B0-0x42C */
+	/* _RST_DEV_V/W_SET_0 0x430 ~ 0x43c */
+	struct clk_set_clr crc_rst_dev_ex_vw[TEGRA_CLK_REGS_VW];
+	/* _CLK_ENB_V/W_CLR_0 0x440 ~ 0x44c */
+	struct clk_set_clr crc_clk_enb_ex_vw[TEGRA_CLK_REGS_VW];
+	/* Additional (T114+) registers */
+	uint crc_rst_cpug_cmplx_set;	/* _RST_CPUG_CMPLX_SET_0,  0x450 */
+	uint crc_rst_cpug_cmplx_clr;	/* _RST_CPUG_CMPLX_CLR_0,  0x454 */
+	uint crc_rst_cpulp_cmplx_set;	/* _RST_CPULP_CMPLX_SET_0, 0x458 */
+	uint crc_rst_cpulp_cmplx_clr;	/* _RST_CPULP_CMPLX_CLR_0, 0x45C */
+	uint crc_clk_cpug_cmplx_set;	/* _CLK_CPUG_CMPLX_SET_0,  0x460 */
+	uint crc_clk_cpug_cmplx_clr;	/* _CLK_CPUG_CMPLX_CLR_0,  0x464 */
+	uint crc_clk_cpulp_cmplx_set;	/* _CLK_CPULP_CMPLX_SET_0, 0x468 */
+	uint crc_clk_cpulp_cmplx_clr;	/* _CLK_CPULP_CMPLX_CLR_0, 0x46C */
+	uint crc_cpu_cmplx_status;	/* _CPU_CMPLX_STATUS_0,    0x470 */
+	uint crc_reserved40[1];		/* _reserved_40,        0x474 */
+	uint crc_intstatus;		/* __INTSTATUS_0,       0x478 */
+	uint crc_intmask;		/* __INTMASK_0,         0x47C */
+	uint crc_utmip_pll_cfg0;	/* _UTMIP_PLL_CFG0_0,	0x480 */
+	uint crc_utmip_pll_cfg1;	/* _UTMIP_PLL_CFG1_0,	0x484 */
+	uint crc_utmip_pll_cfg2;	/* _UTMIP_PLL_CFG2_0,	0x488 */
+
+	uint crc_plle_aux;		/* _PLLE_AUX_0,		0x48C */
+	uint crc_sata_pll_cfg0;		/* _SATA_PLL_CFG0_0,	0x490 */
+	uint crc_sata_pll_cfg1;		/* _SATA_PLL_CFG1_0,	0x494 */
+	uint crc_pcie_pll_cfg0;		/* _PCIE_PLL_CFG0_0,	0x498 */
+
+	uint crc_prog_audio_dly_clk;	/* _PROG_AUDIO_DLY_CLK_0, 0x49C */
+	uint crc_audio_sync_clk_i2s0;	/* _AUDIO_SYNC_CLK_I2S0_0, 0x4A0 */
+	uint crc_audio_sync_clk_i2s1;	/* _AUDIO_SYNC_CLK_I2S1_0, 0x4A4 */
+	uint crc_audio_sync_clk_i2s2;	/* _AUDIO_SYNC_CLK_I2S2_0, 0x4A8 */
+	uint crc_audio_sync_clk_i2s3;	/* _AUDIO_SYNC_CLK_I2S3_0, 0x4AC */
+	uint crc_audio_sync_clk_i2s4;	/* _AUDIO_SYNC_CLK_I2S4_0, 0x4B0 */
+	uint crc_audio_sync_clk_spdif;	/* _AUDIO_SYNC_CLK_SPDIF_0, 0x4B4 */
+
+	uint crc_plld2_base;		/* _PLLD2_BASE_0, 0x4B8 */
+	uint crc_plld2_misc;		/* _PLLD2_MISC_0, 0x4BC */
+	uint crc_utmip_pll_cfg3;	/* _UTMIP_PLL_CFG3_0, 0x4C0 */
+	uint crc_pllrefe_base;		/* _PLLREFE_BASE_0, 0x4C4 */
+	uint crc_pllrefe_misc;		/* _PLLREFE_MISC_0, 0x4C8 */
+	uint crs_reserved_50[7];	/* _reserved_50, 0x4CC-0x4E4 */
+	uint crc_pllc2_base;		/* _PLLC2_BASE_0, 0x4E8 */
+	uint crc_pllc2_misc0;		/* _PLLC2_MISC_0_0, 0x4EC */
+	uint crc_pllc2_misc1;		/* _PLLC2_MISC_1_0, 0x4F0 */
+	uint crc_pllc2_misc2;		/* _PLLC2_MISC_2_0, 0x4F4 */
+	uint crc_pllc2_misc3;		/* _PLLC2_MISC_3_0, 0x4F8 */
+	uint crc_pllc3_base;		/* _PLLC3_BASE_0, 0x4FC */
+	uint crc_pllc3_misc0;		/* _PLLC3_MISC_0_0, 0x500 */
+	uint crc_pllc3_misc1;		/* _PLLC3_MISC_1_0, 0x504 */
+	uint crc_pllc3_misc2;		/* _PLLC3_MISC_2_0, 0x508 */
+	uint crc_pllc3_misc3;		/* _PLLC3_MISC_3_0, 0x50C */
+	uint crc_pllx_misc1;		/* _PLLX_MISC_1_0, 0x510 */
+	uint crc_pllx_misc2;		/* _PLLX_MISC_2_0, 0x514 */
+	uint crc_pllx_misc3;		/* _PLLX_MISC_3_0, 0x518 */
+	uint crc_xusbio_pll_cfg0;	/* _XUSBIO_PLL_CFG0_0, 0x51C */
+	uint crc_xusbio_pll_cfg1;	/* _XUSBIO_PLL_CFG0_1, 0x520 */
+	uint crc_plle_aux1;		/* _PLLE_AUX1_0, 0x524 */
+	uint crc_pllp_reshift;		/* _PLLP_RESHIFT_0, 0x528 */
+	uint crc_utmipll_hw_pwrdn_cfg0;	/* _UTMIPLL_HW_PWRDN_CFG0_0, 0x52C */
+	uint crc_pllu_hw_pwrdn_cfg0;	/* _PLLU_HW_PWRDN_CFG0_0, 0x530 */
+	uint crc_xusb_pll_cfg0;		/* _XUSB_PLL_CFG0_0, 0x534 */
+	uint crc_reserved51[1];		/* _reserved_51, 0x538 */
+	uint crc_clk_cpu_misc;		/* _CLK_CPU_MISC_0, 0x53C */
+	uint crc_clk_cpug_misc;		/* _CLK_CPUG_MISC_0, 0x540 */
+	uint crc_clk_cpulp_misc;	/* _CLK_CPULP_MISC_0, 0x544 */
+	uint crc_pllx_hw_ctrl_cfg;	/* _PLLX_HW_CTRL_CFG_0, 0x548 */
+	uint crc_pllx_sw_ramp_cfg;	/* _PLLX_SW_RAMP_CFG_0, 0x54C */
+	uint crc_pllx_hw_ctrl_status;	/* _PLLX_HW_CTRL_STATUS_0, 0x550 */
+	uint crc_reserved52[1];		/* _reserved_52, 0x554 */
+	uint crc_super_gr3d_clk_div;	/* _SUPER_GR3D_CLK_DIVIDER_0, 0x558 */
+	uint crc_spare_reg0;		/* _SPARE_REG0_0, 0x55C */
+	u32 _rsv32[4];                  /*                    0x560-0x56c */
+	u32 crc_plld2_ss_cfg;		/* _PLLD2_SS_CFG            0x570 */
+	u32 _rsv32_1[7];		/*                      0x574-58c */
+	struct clk_pll_simple plldp;	/* _PLLDP_BASE, 0x590 _PLLDP_MISC */
+	u32 crc_plldp_ss_cfg;		/* _PLLDP_SS_CFG, 0x598 */
+
+	/* Tegra124+ - skip to 0x600 here for new CLK_SOURCE_ regs */
+	uint _rsrv32_2[25];			/* _0x59C - 0x5FC */
+	uint crc_clk_src_x[TEGRA_CLK_SOURCES_X]; /* XUSB, etc, 0x600-0x67C */
+
+	/* Tegra210 - skip to 0x694 here for new CLK_SOURCE_ regs */
+	uint crc_reserved61[5];	/* _reserved_61, 0x680 - 0x690 */
+	/*
+	 * NOTE: PLLA1 regs are in the middle of this Y region. Break this in
+	 * two later if PLLA1 is needed, but for now this is cleaner.
+	 */
+	uint crc_clk_src_y[TEGRA_CLK_SOURCES_Y]; /* SPARE1, etc, 0x694-0x6D8 */
+};
+
+/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */
+#define CPU3_CLK_STP_SHIFT	11
+#define CPU2_CLK_STP_SHIFT	10
+#define CPU1_CLK_STP_SHIFT	9
+#define CPU0_CLK_STP_SHIFT	8
+#define CPU0_CLK_STP_MASK	(1U << CPU0_CLK_STP_SHIFT)
+
+/* CLK_RST_CONTROLLER_PLLx_BASE_0 */
+#define PLL_BYPASS_SHIFT	31
+#define PLL_BYPASS_MASK		(1U << PLL_BYPASS_SHIFT)
+
+#define PLL_ENABLE_SHIFT	30
+#define PLL_ENABLE_MASK		(1U << PLL_ENABLE_SHIFT)
+
+#define PLL_BASE_OVRRIDE_MASK	(1U << 28)
+
+#define PLL_LOCK_SHIFT		27
+#define PLL_LOCK_MASK		(1U << PLL_LOCK_SHIFT)
+
+/* CLK_RST_CONTROLLER_PLLx_OUTx_0 */
+#define PLL_OUT_RSTN		(1 << 0)
+#define PLL_OUT_CLKEN		(1 << 1)
+#define PLL_OUT_OVRRIDE		(1 << 2)
+
+#define PLL_OUT_RATIO_SHIFT	8
+#define PLL_OUT_RATIO_MASK	(0xffU << PLL_OUT_RATIO_SHIFT)
+
+/* CLK_RST_CONTROLLER_PLLx_MISC_0 */
+#define PLL_DCCON_SHIFT		20
+#define PLL_DCCON_MASK		(1U << PLL_DCCON_SHIFT)
+
+#define PLLP_OUT1_OVR		(1 << 2)
+#define PLLP_OUT2_OVR		(1 << 18)
+#define PLLP_OUT3_OVR		(1 << 2)
+#define PLLP_OUT4_OVR		(1 << 18)
+#define PLLP_OUT1_RATIO		8
+#define PLLP_OUT2_RATIO		24
+#define PLLP_OUT3_RATIO		8
+#define PLLP_OUT4_RATIO		24
+
+enum {
+	IN_408_OUT_204_DIVISOR = 2,
+	IN_408_OUT_102_DIVISOR = 6,
+	IN_408_OUT_48_DIVISOR = 15,
+	IN_408_OUT_9_6_DIVISOR = 83,
+};
+
+#define PLLP_OUT1_RSTN_DIS	(1 << 0)
+#define PLLP_OUT1_RSTN_EN	(0 << 0)
+#define PLLP_OUT1_CLKEN		(1 << 1)
+#define PLLP_OUT2_RSTN_DIS	(1 << 16)
+#define PLLP_OUT2_RSTN_EN	(0 << 16)
+#define PLLP_OUT2_CLKEN		(1 << 17)
+
+#define PLLP_OUT3_RSTN_DIS	(1 << 0)
+#define PLLP_OUT3_RSTN_EN	(0 << 0)
+#define PLLP_OUT3_CLKEN		(1 << 1)
+#define PLLP_OUT4_RSTN_DIS	(1 << 16)
+#define PLLP_OUT4_RSTN_EN	(0 << 16)
+#define PLLP_OUT4_CLKEN		(1 << 17)
+
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 */
+#define PLLU_POWERDOWN		(1 << 16)
+#define PLL_ENABLE_POWERDOWN	(1 << 14)
+#define PLL_ACTIVE_POWERDOWN	(1 << 12)
+
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0 */
+#define UTMIP_FORCE_PD_SAMP_C_POWERDOWN		(1 << 4)
+#define UTMIP_FORCE_PD_SAMP_B_POWERDOWN		(1 << 2)
+#define UTMIP_FORCE_PD_SAMP_A_POWERDOWN		(1 << 0)
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 0x50 */
+#define OSC_XOE_SHIFT			0
+#define OSC_XOE_MASK			(1 << OSC_XOE_SHIFT)
+#define OSC_XOE_ENABLE			(1 << OSC_XOE_SHIFT)
+#define OSC_XOBP_SHIFT			1
+#define OSC_XOBP_MASK			(1U << OSC_XOBP_SHIFT)
+#define OSC_XOFS_SHIFT			4
+#define OSC_XOFS_MASK			(0x3F << OSC_XOFS_SHIFT)
+#define OSC_DRIVE_STRENGTH		7
+
+/*
+ * CLK_RST_CONTROLLER_CLK_SOURCE_x_OUT_0 - the mask here is normally 8 bits
+ * but can be 16. We could use knowledge we have to restrict the mask in
+ * the 8-bit cases (the divider_bits value returned by
+ * get_periph_clock_source()) but it does not seem worth it since the code
+ * already checks the ranges of values it is writing, in clk_get_divider().
+ */
+#define OUT_CLK_DIVISOR_SHIFT	0
+#define OUT_CLK_DIVISOR_MASK	(0xffff << OUT_CLK_DIVISOR_SHIFT)
+
+#define OUT_CLK_SOURCE_31_30_SHIFT	30
+#define OUT_CLK_SOURCE_31_30_MASK	(3U << OUT_CLK_SOURCE_31_30_SHIFT)
+
+#define OUT_CLK_SOURCE_31_29_SHIFT	29
+#define OUT_CLK_SOURCE_31_29_MASK	(7U << OUT_CLK_SOURCE_31_29_SHIFT)
+
+/* Note: See comment for MASK_BITS_31_28 in arch-tegra/clock.h */
+#define OUT_CLK_SOURCE_31_28_SHIFT	28
+#define OUT_CLK_SOURCE_31_28_MASK	(15U << OUT_CLK_SOURCE_31_28_SHIFT)
+
+/* CLK_RST_CONTROLLER_SCLK_BURST_POLICY */
+#define SCLK_SYS_STATE_SHIFT    28U
+#define SCLK_SYS_STATE_MASK     (15U << SCLK_SYS_STATE_SHIFT)
+enum {
+	SCLK_SYS_STATE_STDBY,
+	SCLK_SYS_STATE_IDLE,
+	SCLK_SYS_STATE_RUN,
+	SCLK_SYS_STATE_IRQ = 4U,
+	SCLK_SYS_STATE_FIQ = 8U,
+};
+#define SCLK_COP_FIQ_MASK       (1 << 27)
+#define SCLK_CPU_FIQ_MASK       (1 << 26)
+#define SCLK_COP_IRQ_MASK       (1 << 25)
+#define SCLK_CPU_IRQ_MASK       (1 << 24)
+
+#define SCLK_SWAKEUP_FIQ_SOURCE_SHIFT		12
+#define SCLK_SWAKEUP_FIQ_SOURCE_MASK		\
+		(7 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT)
+#define SCLK_SWAKEUP_IRQ_SOURCE_SHIFT		8
+#define SCLK_SWAKEUP_IRQ_SOURCE_MASK		\
+		(7 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT)
+#define SCLK_SWAKEUP_RUN_SOURCE_SHIFT		4
+#define SCLK_SWAKEUP_RUN_SOURCE_MASK		\
+		(7 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT)
+#define SCLK_SWAKEUP_IDLE_SOURCE_SHIFT		0
+
+#define SCLK_SWAKEUP_IDLE_SOURCE_MASK		\
+		(7 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT)
+enum {
+	SCLK_SOURCE_CLKM,
+	SCLK_SOURCE_PLLC_OUT1,
+	SCLK_SOURCE_PLLP_OUT4,
+	SCLK_SOURCE_PLLP_OUT3,
+	SCLK_SOURCE_PLLP_OUT2,
+	SCLK_SOURCE_CLKD,
+	SCLK_SOURCE_CLKS,
+	SCLK_SOURCE_PLLM_OUT1,
+};
+#define SCLK_SWAKE_FIQ_SRC_PLLM_OUT1    (7 << 12)
+#define SCLK_SWAKE_IRQ_SRC_PLLM_OUT1    (7 << 8)
+#define SCLK_SWAKE_RUN_SRC_PLLM_OUT1    (7 << 4)
+#define SCLK_SWAKE_IDLE_SRC_PLLM_OUT1   (7 << 0)
+
+/* CLK_RST_CONTROLLER_SUPER_SCLK_DIVIDER */
+#define SUPER_SCLK_ENB_SHIFT		31U
+#define SUPER_SCLK_ENB_MASK		(1U << 31)
+#define SUPER_SCLK_DIVIDEND_SHIFT	8
+#define SUPER_SCLK_DIVIDEND_MASK	(0xff << SUPER_SCLK_DIVIDEND_SHIFT)
+#define SUPER_SCLK_DIVISOR_SHIFT	0
+#define SUPER_SCLK_DIVISOR_MASK		(0xff << SUPER_SCLK_DIVISOR_SHIFT)
+
+/* CLK_RST_CONTROLLER_CLK_SYSTEM_RATE 0x30 */
+#define CLK_SYS_RATE_HCLK_DISABLE_SHIFT 7
+#define CLK_SYS_RATE_HCLK_DISABLE_MASK  (1 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT)
+#define CLK_SYS_RATE_AHB_RATE_SHIFT     4
+#define CLK_SYS_RATE_AHB_RATE_MASK      (3 << CLK_SYS_RATE_AHB_RATE_SHIFT)
+#define CLK_SYS_RATE_PCLK_DISABLE_SHIFT 3
+#define CLK_SYS_RATE_PCLK_DISABLE_MASK  (1 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT)
+#define CLK_SYS_RATE_APB_RATE_SHIFT     0
+#define CLK_SYS_RATE_APB_RATE_MASK      (3 << CLK_SYS_RATE_AHB_RATE_SHIFT)
+
+/* CLK_RST_CONTROLLER_RST_CPUxx_CMPLX_CLR 0x344 */
+#define CLR_CPURESET0			(1 << 0)
+#define CLR_CPURESET1			(1 << 1)
+#define CLR_CPURESET2			(1 << 2)
+#define CLR_CPURESET3			(1 << 3)
+#define CLR_DBGRESET0			(1 << 12)
+#define CLR_DBGRESET1			(1 << 13)
+#define CLR_DBGRESET2			(1 << 14)
+#define CLR_DBGRESET3			(1 << 15)
+#define CLR_CORERESET0			(1 << 16)
+#define CLR_CORERESET1			(1 << 17)
+#define CLR_CORERESET2			(1 << 18)
+#define CLR_CORERESET3			(1 << 19)
+#define CLR_CXRESET0			(1 << 20)
+#define CLR_CXRESET1			(1 << 21)
+#define CLR_CXRESET2			(1 << 22)
+#define CLR_CXRESET3			(1 << 23)
+#define CLR_L2RESET			(1 << 24)
+#define CLR_NONCPURESET			(1 << 29)
+#define CLR_PRESETDBG			(1 << 30)
+
+/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR 0x34c */
+#define CLR_CPU0_CLK_STP		(1 << 8)
+#define CLR_CPU1_CLK_STP		(1 << 9)
+#define CLR_CPU2_CLK_STP		(1 << 10)
+#define CLR_CPU3_CLK_STP		(1 << 11)
+
+/* CRC_CLK_SOURCE_MSELECT_0 0x3b4 */
+#define MSELECT_CLK_SRC_PLLP_OUT0	(0 << 29)
+
+/* CRC_CLK_ENB_V_SET_0 0x440 */
+#define SET_CLK_ENB_CPUG_ENABLE		(1 << 0)
+#define SET_CLK_ENB_CPULP_ENABLE	(1 << 1)
+#define SET_CLK_ENB_MSELECT_ENABLE	(1 << 3)
+
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 0x484 */
+#define PLL_ACTIVE_POWERDOWN		(1 << 12)
+#define PLL_ENABLE_POWERDOWN		(1 << 14)
+#define PLLU_POWERDOWN			(1 << 16)
+
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0 0x488 */
+#define UTMIP_FORCE_PD_SAMP_A_POWERDOWN	(1 << 0)
+#define UTMIP_FORCE_PD_SAMP_B_POWERDOWN	(1 << 2)
+#define UTMIP_FORCE_PD_SAMP_C_POWERDOWN	(1 << 4)
+
+/* CLK_RST_CONTROLLER_PLLX_MISC_3 */
+#define PLLX_IDDQ_SHIFT			3
+#define PLLX_IDDQ_MASK			(1U << PLLX_IDDQ_SHIFT)
+
+/* CLK_RST_PLLDP_SS_CFG */
+#define PLLDP_SS_CFG_CLAMP		(1 << 22)
+#define PLLDP_SS_CFG_UNDOCUMENTED	(1 << 24)
+#define PLLDP_SS_CFG_DITHER		(1 << 28)
+
+/* CLK_RST_PLLD_MISC */
+#define PLLD_CLKENABLE			30
+
+#endif	/* _TEGRA_CLK_RST_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/clock.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/clock.h
new file mode 100644
index 000000000..1d80d9e94
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/clock.h
@@ -0,0 +1,423 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+/* Tegra clock control functions */
+
+#ifndef _TEGRA_CLOCK_H_
+#define _TEGRA_CLOCK_H_
+
+struct udevice;
+
+/* Set of oscillator frequencies supported in the internal API. */
+enum clock_osc_freq {
+	/* All in MHz, so 13_0 is 13.0MHz */
+	CLOCK_OSC_FREQ_13_0,
+	CLOCK_OSC_FREQ_19_2,
+	CLOCK_OSC_FREQ_12_0,
+	CLOCK_OSC_FREQ_26_0,
+	CLOCK_OSC_FREQ_38_4,
+	CLOCK_OSC_FREQ_48_0,
+
+	CLOCK_OSC_FREQ_COUNT,
+};
+
+/*
+ * Note that no Tegra clock register actually uses all of bits 31:28 as
+ * the mux field. Rather, bits 30:28, 29:28, or 28 are used. However, in
+ * those cases, nothing is stored in the bits about the mux field, so it's
+ * safe to pretend that the mux field extends all the way to the end of the
+ * register. As such, the U-Boot clock driver is currently a bit lazy, and
+ * doesn't distinguish between 31:28, 30:28, 29:28 and 28; it just lumps
+ * them all together and pretends they're all 31:28.
+ */
+enum {
+	MASK_BITS_31_30,
+	MASK_BITS_31_29,
+	MASK_BITS_31_28,
+};
+
+#include <asm/arch/clock-tables.h>
+/* PLL stabilization delay in usec */
+#define CLOCK_PLL_STABLE_DELAY_US 300
+
+/* return the current oscillator clock frequency */
+enum clock_osc_freq clock_get_osc_freq(void);
+
+/* return the clk_m frequency */
+unsigned int clk_m_get_rate(unsigned int parent_rate);
+
+/**
+ * Start PLL using the provided configuration parameters.
+ *
+ * @param id	clock id
+ * @param divm	input divider
+ * @param divn	feedback divider
+ * @param divp	post divider 2^n
+ * @param cpcon	charge pump setup control
+ * @param lfcon	loop filter setup control
+ *
+ * @returns monotonic time in us that the PLL will be stable
+ */
+unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn,
+		u32 divp, u32 cpcon, u32 lfcon);
+
+/**
+ * Set PLL output frequency
+ *
+ * @param clkid	clock id
+ * @param pllout	pll output id
+ * @param rate		desired output rate
+ *
+ * @return 0 if ok, -1 on error (invalid clock id or no suitable divider)
+ */
+int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout,
+		unsigned rate);
+
+/**
+ * Read low-level parameters of a PLL.
+ *
+ * @param id	clock id to read (note: USB is not supported)
+ * @param divm	returns input divider
+ * @param divn	returns feedback divider
+ * @param divp	returns post divider 2^n
+ * @param cpcon	returns charge pump setup control
+ * @param lfcon	returns loop filter setup control
+ *
+ * @returns 0 if ok, -1 on error (invalid clock id)
+ */
+int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
+		u32 *divp, u32 *cpcon, u32 *lfcon);
+
+/*
+ * Enable a clock
+ *
+ * @param id	clock id
+ */
+void clock_enable(enum periph_id clkid);
+
+/*
+ * Disable a clock
+ *
+ * @param id	clock id
+ */
+void clock_disable(enum periph_id clkid);
+
+/*
+ * Set whether a clock is enabled or disabled.
+ *
+ * @param id		clock id
+ * @param enable	1 to enable, 0 to disable
+ */
+void clock_set_enable(enum periph_id clkid, int enable);
+
+/**
+ * Reset a peripheral. This puts it in reset, waits for a delay, then takes
+ * it out of reset and waits for th delay again.
+ *
+ * @param periph_id	peripheral to reset
+ * @param us_delay	time to delay in microseconds
+ */
+void reset_periph(enum periph_id periph_id, int us_delay);
+
+/**
+ * Put a peripheral into or out of reset.
+ *
+ * @param periph_id	peripheral to reset
+ * @param enable	1 to put into reset, 0 to take out of reset
+ */
+void reset_set_enable(enum periph_id periph_id, int enable);
+
+
+/* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */
+enum crc_reset_id {
+	/* Things we can hold in reset for each CPU */
+	crc_rst_cpu = 1,
+	crc_rst_de = 1 << 4,	/* What is de? */
+	crc_rst_watchdog = 1 << 8,
+	crc_rst_debug = 1 << 12,
+};
+
+/**
+ * Put parts of the CPU complex into or out of reset.\
+ *
+ * @param cpu		cpu number (0 or 1 on Tegra2, 0-3 on Tegra3)
+ * @param which		which parts of the complex to affect (OR of crc_reset_id)
+ * @param reset		1 to assert reset, 0 to de-assert
+ */
+void reset_cmplx_set_enable(int cpu, int which, int reset);
+
+/**
+ * Set the source for a peripheral clock. This plus the divisor sets the
+ * clock rate. You need to look up the datasheet to see the meaning of the
+ * source parameter as it changes for each peripheral.
+ *
+ * Warning: This function is only for use pre-relocation. Please use
+ * clock_start_periph_pll() instead.
+ *
+ * @param periph_id	peripheral to adjust
+ * @param source	source clock (0, 1, 2 or 3)
+ */
+void clock_ll_set_source(enum periph_id periph_id, unsigned source);
+
+/**
+ * This function is similar to clock_ll_set_source() except that it can be
+ * used for clocks with more than 2 mux bits.
+ *
+ * @param periph_id	peripheral to adjust
+ * @param mux_bits	number of mux bits for the clock
+ * @param source	source clock (0-15 depending on mux_bits)
+ */
+int clock_ll_set_source_bits(enum periph_id periph_id, int mux_bits,
+			     unsigned source);
+
+/**
+ * Set the source and divisor for a peripheral clock. This sets the
+ * clock rate. You need to look up the datasheet to see the meaning of the
+ * source parameter as it changes for each peripheral.
+ *
+ * Warning: This function is only for use pre-relocation. Please use
+ * clock_start_periph_pll() instead.
+ *
+ * @param periph_id	peripheral to adjust
+ * @param source	source clock (0, 1, 2 or 3)
+ * @param divisor	divisor value to use
+ */
+void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
+		unsigned divisor);
+
+/**
+ * Returns the current parent clock ID of a given peripheral. This can be
+ * useful in order to call clock_*_periph_*() from generic code that has no
+ * specific knowledge of system-level clock tree structure.
+ *
+ * @param periph_id	peripheral to query
+ * @return clock ID of the peripheral's current parent clock
+ */
+enum clock_id clock_get_periph_parent(enum periph_id periph_id);
+
+/**
+ * Start a peripheral PLL clock at the given rate. This also resets the
+ * peripheral.
+ *
+ * @param periph_id	peripheral to start
+ * @param parent	PLL id of required parent clock
+ * @param rate		Required clock rate in Hz
+ * @return rate selected in Hz, or -1U if something went wrong
+ */
+unsigned clock_start_periph_pll(enum periph_id periph_id,
+		enum clock_id parent, unsigned rate);
+
+/**
+ * Returns the rate of a peripheral clock in Hz. Since the caller almost
+ * certainly knows the parent clock (having just set it) we require that
+ * this be passed in so we don't need to work it out.
+ *
+ * @param periph_id	peripheral to start
+ * @param parent	PLL id of parent clock (used to calculate rate, you
+ *			must know this!)
+ * @return clock rate of peripheral in Hz
+ */
+unsigned long clock_get_periph_rate(enum periph_id periph_id,
+		enum clock_id parent);
+
+/**
+ * Adjust peripheral PLL clock to the given rate. This does not reset the
+ * peripheral. If a second stage divisor is not available, pass NULL for
+ * extra_div. If it is available, then this parameter will return the
+ * divisor selected (which will be a power of 2 from 1 to 256).
+ *
+ * @param periph_id	peripheral to start
+ * @param parent	PLL id of required parent clock
+ * @param rate		Required clock rate in Hz
+ * @param extra_div	value for the second-stage divisor (NULL if one is
+			not available)
+ * @return rate selected in Hz, or -1U if something went wrong
+ */
+unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
+		enum clock_id parent, unsigned rate, int *extra_div);
+
+/**
+ * Returns the clock rate of a specified clock, in Hz.
+ *
+ * @param parent	PLL id of clock to check
+ * @return rate of clock in Hz
+ */
+unsigned clock_get_rate(enum clock_id clkid);
+
+/**
+ * Start up a UART using low-level calls
+ *
+ * Prior to relocation clock_start_periph_pll() cannot be called. This
+ * function provides a way to set up a UART using low-level calls which
+ * do not require BSS.
+ *
+ * @param periph_id	Peripheral ID of UART to enable (e,g, PERIPH_ID_UART1)
+ */
+void clock_ll_start_uart(enum periph_id periph_id);
+
+/**
+ * Decode a peripheral ID from a device tree node.
+ *
+ * This works by looking up the peripheral's 'clocks' node and reading out
+ * the second cell, which is the clock number / peripheral ID.
+ *
+ * @param blob		FDT blob to use
+ * @param node		Node to look at
+ * @return peripheral ID, or PERIPH_ID_NONE if none
+ */
+int clock_decode_periph_id(struct udevice *dev);
+
+/**
+ * Checks if the oscillator bypass is enabled (XOBP bit)
+ *
+ * @return 1 if bypass is enabled, 0 if not
+ */
+int clock_get_osc_bypass(void);
+
+/*
+ * Checks that clocks are valid and prints a warning if not
+ *
+ * @return 0 if ok, -1 on error
+ */
+int clock_verify(void);
+
+/* Initialize the clocks */
+void clock_init(void);
+
+/* Initialize the PLLs */
+void clock_early_init(void);
+
+/* @return true if hardware indicates that clock_early_init() was called */
+bool clock_early_init_done(void);
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id);
+
+/* Returns a pointer to the given 'simple' PLL */
+struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid);
+
+/*
+ * Given a peripheral ID, determine where the mux bits are in the peripheral
+ * clock's register, the number of divider bits the clock has, and the SoC-
+ * specific clock type.
+ *
+ * This is an internal API between the core Tegra clock code and the SoC-
+ * specific clock code.
+ *
+ * @param periph_id     peripheral to query
+ * @param mux_bits      Set to number of bits in mux register
+ * @param divider_bits  Set to the relevant MASK_BITS_* value
+ * @param type          Set to the SoC-specific clock type
+ * @return 0 on success, -1 on error
+ */
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+			  int *divider_bits, int *type);
+
+/*
+ * Given a peripheral ID and clock source mux value, determine the clock_id
+ * of that peripheral's parent.
+ *
+ * This is an internal API between the core Tegra clock code and the SoC-
+ * specific clock code.
+ *
+ * @param periph_id     peripheral to query
+ * @param source        raw clock source mux value
+ * @return the CLOCK_ID_* value @source represents
+ */
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source);
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id     peripheral to start
+ * @param source        PLL id of required parent clock
+ * @param mux_bits      Set to number of bits in mux register: 2 or 4
+ * @param divider_bits  Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+		enum clock_id parent, int *mux_bits, int *divider_bits);
+
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id        Clock ID according to tegra30 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id);
+
+/**
+ * Set the output frequency you want for each PLL clock.
+ * PLL output frequencies are programmed by setting their N, M and P values.
+ * The governing equations are:
+ *     VCO = (Fi / m) * n, Fo = VCO / (2^p)
+ *     where Fo is the output frequency from the PLL.
+ * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
+ *     216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
+ * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
+ *
+ * @param n PLL feedback divider(DIVN)
+ * @param m PLL input divider(DIVN)
+ * @param p post divider(DIVP)
+ * @param cpcon base PLL charge pump(CPCON)
+ * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
+ *              be overridden), 1 if PLL is already correct
+ */
+int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon);
+
+/* return 1 if a peripheral ID is in range */
+#define clock_type_id_isvalid(id) ((id) >= 0 && \
+		(id) < CLOCK_TYPE_COUNT)
+
+/* return 1 if a periphc_internal_id is in range */
+#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
+		(id) < PERIPHC_COUNT)
+
+/* SoC-specific TSC init */
+void arch_timer_init(void);
+
+void tegra30_set_up_pllp(void);
+
+/* Number of PLL-based clocks (i.e. not OSC, MCLK or 32KHz) */
+#define CLOCK_ID_PLL_COUNT	(CLOCK_ID_COUNT - 3)
+
+struct clk_pll_info {
+	u32	m_shift:5;	/* DIVM_SHIFT */
+	u32	n_shift:5;	/* DIVN_SHIFT */
+	u32	p_shift:5;	/* DIVP_SHIFT */
+	u32	kcp_shift:5;	/* KCP/cpcon SHIFT */
+	u32	kvco_shift:5;	/* KVCO/lfcon SHIFT */
+	u32	lock_ena:6;	/* LOCK_ENABLE/EN_LOCKDET shift */
+	u32	rsvd:1;
+	u32	m_mask:10;	/* DIVM_MASK */
+	u32	n_mask:12;	/* DIVN_MASK */
+	u32	p_mask:10;	/* DIVP_MASK or VCO_MASK */
+	u32	kcp_mask:10;	/* KCP/CPCON MASK */
+	u32	kvco_mask:10;	/* KVCO/LFCON MASK */
+	u32	lock_det:6;	/* LOCK_DETECT/LOCKED shift */
+	u32	rsvd2:6;
+};
+extern struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT];
+
+struct periph_clk_init {
+	enum periph_id periph_id;
+	enum clock_id parent_clock_id;
+};
+extern struct periph_clk_init periph_clk_init_table[];
+
+/**
+ * Enable output clock for external peripherals
+ *
+ * @param clk_id	Clock ID to output (1, 2 or 3)
+ * @return 0 if OK. -ve on error
+ */
+int clock_external_output(int clk_id);
+
+#endif  /* _TEGRA_CLOCK_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/dc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/dc.h
new file mode 100644
index 000000000..6444af299
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/dc.h
@@ -0,0 +1,572 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef __ASM_ARCH_TEGRA_DC_H
+#define __ASM_ARCH_TEGRA_DC_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/* Register definitions for the Tegra display controller */
+
+/* CMD register 0x000 ~ 0x43 */
+struct dc_cmd_reg {
+	/* Address 0x000 ~ 0x002 */
+	uint gen_incr_syncpt;		/* _CMD_GENERAL_INCR_SYNCPT_0 */
+	uint gen_incr_syncpt_ctrl;	/* _CMD_GENERAL_INCR_SYNCPT_CNTRL_0 */
+	uint gen_incr_syncpt_err;	/* _CMD_GENERAL_INCR_SYNCPT_ERROR_0 */
+
+	uint reserved0[5];		/* reserved_0[5] */
+
+	/* Address 0x008 ~ 0x00a */
+	uint win_a_incr_syncpt;		/* _CMD_WIN_A_INCR_SYNCPT_0 */
+	uint win_a_incr_syncpt_ctrl;	/* _CMD_WIN_A_INCR_SYNCPT_CNTRL_0 */
+	uint win_a_incr_syncpt_err;	/* _CMD_WIN_A_INCR_SYNCPT_ERROR_0 */
+
+	uint reserved1[5];		/* reserved_1[5] */
+
+	/* Address 0x010 ~ 0x012 */
+	uint win_b_incr_syncpt;		/* _CMD_WIN_B_INCR_SYNCPT_0 */
+	uint win_b_incr_syncpt_ctrl;	/* _CMD_WIN_B_INCR_SYNCPT_CNTRL_0 */
+	uint win_b_incr_syncpt_err;	/* _CMD_WIN_B_INCR_SYNCPT_ERROR_0 */
+
+	uint reserved2[5];		/* reserved_2[5] */
+
+	/* Address 0x018 ~ 0x01a */
+	uint win_c_incr_syncpt;		/* _CMD_WIN_C_INCR_SYNCPT_0 */
+	uint win_c_incr_syncpt_ctrl;	/* _CMD_WIN_C_INCR_SYNCPT_CNTRL_0 */
+	uint win_c_incr_syncpt_err;	/* _CMD_WIN_C_INCR_SYNCPT_ERROR_0 */
+
+	uint reserved3[13];		/* reserved_3[13] */
+
+	/* Address 0x028 */
+	uint cont_syncpt_vsync;		/* _CMD_CONT_SYNCPT_VSYNC_0 */
+
+	uint reserved4[7];		/* reserved_4[7] */
+
+	/* Address 0x030 ~ 0x033 */
+	uint ctxsw;			/* _CMD_CTXSW_0 */
+	uint disp_cmd_opt0;		/* _CMD_DISPLAY_COMMAND_OPTION0_0 */
+	uint disp_cmd;			/* _CMD_DISPLAY_COMMAND_0 */
+	uint sig_raise;			/* _CMD_SIGNAL_RAISE_0 */
+
+	uint reserved5[2];		/* reserved_0[2] */
+
+	/* Address 0x036 ~ 0x03e */
+	uint disp_pow_ctrl;		/* _CMD_DISPLAY_POWER_CONTROL_0 */
+	uint int_stat;			/* _CMD_INT_STATUS_0 */
+	uint int_mask;			/* _CMD_INT_MASK_0 */
+	uint int_enb;			/* _CMD_INT_ENABLE_0 */
+	uint int_type;			/* _CMD_INT_TYPE_0 */
+	uint int_polarity;		/* _CMD_INT_POLARITY_0 */
+	uint sig_raise1;		/* _CMD_SIGNAL_RAISE1_0 */
+	uint sig_raise2;		/* _CMD_SIGNAL_RAISE2_0 */
+	uint sig_raise3;		/* _CMD_SIGNAL_RAISE3_0 */
+
+	uint reserved6;			/* reserved_6 */
+
+	/* Address 0x040 ~ 0x043 */
+	uint state_access;		/* _CMD_STATE_ACCESS_0 */
+	uint state_ctrl;		/* _CMD_STATE_CONTROL_0 */
+	uint disp_win_header;		/* _CMD_DISPLAY_WINDOW_HEADER_0 */
+	uint reg_act_ctrl;		/* _CMD_REG_ACT_CONTROL_0 */
+};
+
+enum {
+	PIN_REG_COUNT		= 4,
+	PIN_OUTPUT_SEL_COUNT	= 7,
+};
+
+/* COM register 0x300 ~ 0x329 */
+struct dc_com_reg {
+	/* Address 0x300 ~ 0x301 */
+	uint crc_ctrl;			/* _COM_CRC_CONTROL_0 */
+	uint crc_checksum;		/* _COM_CRC_CHECKSUM_0 */
+
+	/* _COM_PIN_OUTPUT_ENABLE0/1/2/3_0: Address 0x302 ~ 0x305 */
+	uint pin_output_enb[PIN_REG_COUNT];
+
+	/* _COM_PIN_OUTPUT_POLARITY0/1/2/3_0: Address 0x306 ~ 0x309 */
+	uint pin_output_polarity[PIN_REG_COUNT];
+
+	/* _COM_PIN_OUTPUT_DATA0/1/2/3_0: Address 0x30a ~ 0x30d */
+	uint pin_output_data[PIN_REG_COUNT];
+
+	/* _COM_PIN_INPUT_ENABLE0_0: Address 0x30e ~ 0x311 */
+	uint pin_input_enb[PIN_REG_COUNT];
+
+	/* Address 0x312 ~ 0x313 */
+	uint pin_input_data0;		/* _COM_PIN_INPUT_DATA0_0 */
+	uint pin_input_data1;		/* _COM_PIN_INPUT_DATA1_0 */
+
+	/* _COM_PIN_OUTPUT_SELECT0/1/2/3/4/5/6_0: Address 0x314 ~ 0x31a */
+	uint pin_output_sel[PIN_OUTPUT_SEL_COUNT];
+
+	/* Address 0x31b ~ 0x329 */
+	uint pin_misc_ctrl;		/* _COM_PIN_MISC_CONTROL_0 */
+	uint pm0_ctrl;			/* _COM_PM0_CONTROL_0 */
+	uint pm0_duty_cycle;		/* _COM_PM0_DUTY_CYCLE_0 */
+	uint pm1_ctrl;			/* _COM_PM1_CONTROL_0 */
+	uint pm1_duty_cycle;		/* _COM_PM1_DUTY_CYCLE_0 */
+	uint spi_ctrl;			/* _COM_SPI_CONTROL_0 */
+	uint spi_start_byte;		/* _COM_SPI_START_BYTE_0 */
+	uint hspi_wr_data_ab;		/* _COM_HSPI_WRITE_DATA_AB_0 */
+	uint hspi_wr_data_cd;		/* _COM_HSPI_WRITE_DATA_CD */
+	uint hspi_cs_dc;		/* _COM_HSPI_CS_DC_0 */
+	uint scratch_reg_a;		/* _COM_SCRATCH_REGISTER_A_0 */
+	uint scratch_reg_b;		/* _COM_SCRATCH_REGISTER_B_0 */
+	uint gpio_ctrl;			/* _COM_GPIO_CTRL_0 */
+	uint gpio_debounce_cnt;		/* _COM_GPIO_DEBOUNCE_COUNTER_0 */
+	uint crc_checksum_latched;	/* _COM_CRC_CHECKSUM_LATCHED_0 */
+};
+
+enum dc_disp_h_pulse_pos {
+	H_PULSE0_POSITION_A,
+	H_PULSE0_POSITION_B,
+	H_PULSE0_POSITION_C,
+	H_PULSE0_POSITION_D,
+	H_PULSE0_POSITION_COUNT,
+};
+
+struct _disp_h_pulse {
+	/* _DISP_H_PULSE0/1/2_CONTROL_0 */
+	uint h_pulse_ctrl;
+	/* _DISP_H_PULSE0/1/2_POSITION_A/B/C/D_0 */
+	uint h_pulse_pos[H_PULSE0_POSITION_COUNT];
+};
+
+enum dc_disp_v_pulse_pos {
+	V_PULSE0_POSITION_A,
+	V_PULSE0_POSITION_B,
+	V_PULSE0_POSITION_C,
+	V_PULSE0_POSITION_COUNT,
+};
+
+struct _disp_v_pulse0 {
+	/* _DISP_H_PULSE0/1_CONTROL_0 */
+	uint v_pulse_ctrl;
+	/* _DISP_H_PULSE0/1_POSITION_A/B/C_0 */
+	uint v_pulse_pos[V_PULSE0_POSITION_COUNT];
+};
+
+struct _disp_v_pulse2 {
+	/* _DISP_H_PULSE2/3_CONTROL_0 */
+	uint v_pulse_ctrl;
+	/* _DISP_H_PULSE2/3_POSITION_A_0 */
+	uint v_pulse_pos_a;
+};
+
+enum dc_disp_h_pulse_reg {
+	H_PULSE0,
+	H_PULSE1,
+	H_PULSE2,
+	H_PULSE_COUNT,
+};
+
+enum dc_disp_pp_select {
+	PP_SELECT_A,
+	PP_SELECT_B,
+	PP_SELECT_C,
+	PP_SELECT_D,
+	PP_SELECT_COUNT,
+};
+
+/* DISP register 0x400 ~ 0x4c1 */
+struct dc_disp_reg {
+	/* Address 0x400 ~ 0x40a */
+	uint disp_signal_opt0;		/* _DISP_DISP_SIGNAL_OPTIONS0_0 */
+	uint disp_signal_opt1;		/* _DISP_DISP_SIGNAL_OPTIONS1_0 */
+	uint disp_win_opt;		/* _DISP_DISP_WIN_OPTIONS_0 */
+	uint mem_high_pri;		/* _DISP_MEM_HIGH_PRIORITY_0 */
+	uint mem_high_pri_timer;	/* _DISP_MEM_HIGH_PRIORITY_TIMER_0 */
+	uint disp_timing_opt;		/* _DISP_DISP_TIMING_OPTIONS_0 */
+	uint ref_to_sync;		/* _DISP_REF_TO_SYNC_0 */
+	uint sync_width;		/* _DISP_SYNC_WIDTH_0 */
+	uint back_porch;		/* _DISP_BACK_PORCH_0 */
+	uint disp_active;		/* _DISP_DISP_ACTIVE_0 */
+	uint front_porch;		/* _DISP_FRONT_PORCH_0 */
+
+	/* Address 0x40b ~ 0x419: _DISP_H_PULSE0/1/2_  */
+	struct _disp_h_pulse h_pulse[H_PULSE_COUNT];
+
+	/* Address 0x41a ~ 0x421 */
+	struct _disp_v_pulse0 v_pulse0;	/* _DISP_V_PULSE0_ */
+	struct _disp_v_pulse0 v_pulse1;	/* _DISP_V_PULSE1_ */
+
+	/* Address 0x422 ~ 0x425 */
+	struct _disp_v_pulse2 v_pulse3;	/* _DISP_V_PULSE2_ */
+	struct _disp_v_pulse2 v_pulse4;	/* _DISP_V_PULSE3_ */
+
+	/* Address 0x426 ~ 0x429 */
+	uint m0_ctrl;			/* _DISP_M0_CONTROL_0 */
+	uint m1_ctrl;			/* _DISP_M1_CONTROL_0 */
+	uint di_ctrl;			/* _DISP_DI_CONTROL_0 */
+	uint pp_ctrl;			/* _DISP_PP_CONTROL_0 */
+
+	/* Address 0x42a ~ 0x42d: _DISP_PP_SELECT_A/B/C/D_0 */
+	uint pp_select[PP_SELECT_COUNT];
+
+	/* Address 0x42e ~ 0x435 */
+	uint disp_clk_ctrl;		/* _DISP_DISP_CLOCK_CONTROL_0 */
+	uint disp_interface_ctrl;	/* _DISP_DISP_INTERFACE_CONTROL_0 */
+	uint disp_color_ctrl;		/* _DISP_DISP_COLOR_CONTROL_0 */
+	uint shift_clk_opt;		/* _DISP_SHIFT_CLOCK_OPTIONS_0 */
+	uint data_enable_opt;		/* _DISP_DATA_ENABLE_OPTIONS_0 */
+	uint serial_interface_opt;	/* _DISP_SERIAL_INTERFACE_OPTIONS_0 */
+	uint lcd_spi_opt;		/* _DISP_LCD_SPI_OPTIONS_0 */
+	uint border_color;		/* _DISP_BORDER_COLOR_0 */
+
+	/* Address 0x436 ~ 0x439 */
+	uint color_key0_lower;		/* _DISP_COLOR_KEY0_LOWER_0 */
+	uint color_key0_upper;		/* _DISP_COLOR_KEY0_UPPER_0 */
+	uint color_key1_lower;		/* _DISP_COLOR_KEY1_LOWER_0 */
+	uint color_key1_upper;		/* _DISP_COLOR_KEY1_UPPER_0 */
+
+	uint reserved0[2];		/* reserved_0[2] */
+
+	/* Address 0x43c ~ 0x442 */
+	uint cursor_foreground;		/* _DISP_CURSOR_FOREGROUND_0 */
+	uint cursor_background;		/* _DISP_CURSOR_BACKGROUND_0 */
+	uint cursor_start_addr;		/* _DISP_CURSOR_START_ADDR_0 */
+	uint cursor_start_addr_ns;	/* _DISP_CURSOR_START_ADDR_NS_0 */
+	uint cursor_pos;		/* _DISP_CURSOR_POSITION_0 */
+	uint cursor_pos_ns;		/* _DISP_CURSOR_POSITION_NS_0 */
+	uint seq_ctrl;			/* _DISP_INIT_SEQ_CONTROL_0 */
+
+	/* Address 0x443 ~ 0x446 */
+	uint spi_init_seq_data_a;	/* _DISP_SPI_INIT_SEQ_DATA_A_0 */
+	uint spi_init_seq_data_b;	/* _DISP_SPI_INIT_SEQ_DATA_B_0 */
+	uint spi_init_seq_data_c;	/* _DISP_SPI_INIT_SEQ_DATA_C_0 */
+	uint spi_init_seq_data_d;	/* _DISP_SPI_INIT_SEQ_DATA_D_0 */
+
+	uint reserved1[0x39];		/* reserved1[0x39], */
+
+	/* Address 0x480 ~ 0x484 */
+	uint dc_mccif_fifoctrl;		/* _DISP_DC_MCCIF_FIFOCTRL_0 */
+	uint mccif_disp0a_hyst;		/* _DISP_MCCIF_DISPLAY0A_HYST_0 */
+	uint mccif_disp0b_hyst;		/* _DISP_MCCIF_DISPLAY0B_HYST_0 */
+	uint mccif_disp0c_hyst;		/* _DISP_MCCIF_DISPLAY0C_HYST_0 */
+	uint mccif_disp1b_hyst;		/* _DISP_MCCIF_DISPLAY1B_HYST_0 */
+
+	uint reserved2[0x3b];		/* reserved2[0x3b] */
+
+	/* Address 0x4c0 ~ 0x4c1 */
+	uint dac_crt_ctrl;		/* _DISP_DAC_CRT_CTRL_0 */
+	uint disp_misc_ctrl;		/* _DISP_DISP_MISC_CONTROL_0 */
+
+	u32 rsvd_4c2[34];		/* 4c2 - 4e3 */
+
+	/* Address 0x4e4 */
+	u32 blend_background_color;	/* _DISP_BLEND_BACKGROUND_COLOR_0 */
+};
+
+enum dc_winc_filter_p {
+	WINC_FILTER_COUNT	= 0x10,
+};
+
+/* Window A/B/C register 0x500 ~ 0x628 */
+struct dc_winc_reg {
+
+	/* Address 0x500 */
+	uint color_palette;		/* _WINC_COLOR_PALETTE_0 */
+
+	uint reserved0[0xff];		/* reserved_0[0xff] */
+
+	/* Address 0x600 */
+	uint palette_color_ext;		/* _WINC_PALETTE_COLOR_EXT_0 */
+
+	/* _WINC_H_FILTER_P00~0F_0 */
+	/* Address 0x601 ~ 0x610 */
+	uint h_filter_p[WINC_FILTER_COUNT];
+
+	/* Address 0x611 ~ 0x618 */
+	uint csc_yof;			/* _WINC_CSC_YOF_0 */
+	uint csc_kyrgb;			/* _WINC_CSC_KYRGB_0 */
+	uint csc_kur;			/* _WINC_CSC_KUR_0 */
+	uint csc_kvr;			/* _WINC_CSC_KVR_0 */
+	uint csc_kug;			/* _WINC_CSC_KUG_0 */
+	uint csc_kvg;			/* _WINC_CSC_KVG_0 */
+	uint csc_kub;			/* _WINC_CSC_KUB_0 */
+	uint csc_kvb;			/* _WINC_CSC_KVB_0 */
+
+	/* Address 0x619 ~ 0x628: _WINC_V_FILTER_P00~0F_0 */
+	uint v_filter_p[WINC_FILTER_COUNT];
+};
+
+/* WIN A/B/C Register 0x700 ~ 0x719*/
+struct dc_win_reg {
+	/* Address 0x700 ~ 0x719 */
+	uint win_opt;			/* _WIN_WIN_OPTIONS_0 */
+	uint byte_swap;			/* _WIN_BYTE_SWAP_0 */
+	uint buffer_ctrl;		/* _WIN_BUFFER_CONTROL_0 */
+	uint color_depth;		/* _WIN_COLOR_DEPTH_0 */
+	uint pos;			/* _WIN_POSITION_0 */
+	uint size;			/* _WIN_SIZE_0 */
+	uint prescaled_size;		/* _WIN_PRESCALED_SIZE_0 */
+	uint h_initial_dda;		/* _WIN_H_INITIAL_DDA_0 */
+	uint v_initial_dda;		/* _WIN_V_INITIAL_DDA_0 */
+	uint dda_increment;		/* _WIN_DDA_INCREMENT_0 */
+	uint line_stride;		/* _WIN_LINE_STRIDE_0 */
+	uint buf_stride;		/* _WIN_BUF_STRIDE_0 */
+	uint uv_buf_stride;		/* _WIN_UV_BUF_STRIDE_0 */
+	uint buffer_addr_mode;		/* _WIN_BUFFER_ADDR_MODE_0 */
+	uint dv_ctrl;			/* _WIN_DV_CONTROL_0 */
+	uint blend_nokey;		/* _WIN_BLEND_NOKEY_0 */
+	uint blend_1win;		/* _WIN_BLEND_1WIN_0 */
+	uint blend_2win_x;		/* _WIN_BLEND_2WIN_X_0 */
+	uint blend_2win_y;		/* _WIN_BLEND_2WIN_Y_0 */
+	uint blend_3win_xy;		/* _WIN_BLEND_3WIN_XY_0 */
+	uint hp_fetch_ctrl;		/* _WIN_HP_FETCH_CONTROL_0 */
+	uint global_alpha;		/* _WIN_GLOBAL_ALPHA */
+	uint blend_layer_ctrl;		/* _WINBUF_BLEND_LAYER_CONTROL_0 */
+	uint blend_match_select;	/* _WINBUF_BLEND_MATCH_SELECT_0 */
+	uint blend_nomatch_select;	/* _WINBUF_BLEND_NOMATCH_SELECT_0 */
+	uint blend_alpha_1bit;		/* _WINBUF_BLEND_ALPHA_1BIT_0 */
+};
+
+/* WINBUF A/B/C Register 0x800 ~ 0x80d */
+struct dc_winbuf_reg {
+	/* Address 0x800 ~ 0x80d */
+	uint start_addr;		/* _WINBUF_START_ADDR_0 */
+	uint start_addr_ns;		/* _WINBUF_START_ADDR_NS_0 */
+	uint start_addr_u;		/* _WINBUF_START_ADDR_U_0 */
+	uint start_addr_u_ns;		/* _WINBUF_START_ADDR_U_NS_0 */
+	uint start_addr_v;		/* _WINBUF_START_ADDR_V_0 */
+	uint start_addr_v_ns;		/* _WINBUF_START_ADDR_V_NS_0 */
+	uint addr_h_offset;		/* _WINBUF_ADDR_H_OFFSET_0 */
+	uint addr_h_offset_ns;		/* _WINBUF_ADDR_H_OFFSET_NS_0 */
+	uint addr_v_offset;		/* _WINBUF_ADDR_V_OFFSET_0 */
+	uint addr_v_offset_ns;		/* _WINBUF_ADDR_V_OFFSET_NS_0 */
+	uint uflow_status;		/* _WINBUF_UFLOW_STATUS_0 */
+	uint buffer_surface_kind;	/* DC_WIN_BUFFER_SURFACE_KIND */
+	uint rsvd_80c;
+	uint start_addr_hi;		/* DC_WINBUF_START_ADDR_HI_0 */
+};
+
+/* Display Controller (DC_) regs */
+struct dc_ctlr {
+	struct dc_cmd_reg cmd;		/* CMD register 0x000 ~ 0x43 */
+	uint reserved0[0x2bc];
+
+	struct dc_com_reg com;		/* COM register 0x300 ~ 0x329 */
+	uint reserved1[0xd6];
+
+	struct dc_disp_reg disp;	/* DISP register 0x400 ~ 0x4e4 */
+	uint reserved2[0x1b];
+
+	struct dc_winc_reg winc;	/* Window A/B/C 0x500 ~ 0x628 */
+	uint reserved3[0xd7];
+
+	struct dc_win_reg win;		/* WIN A/B/C 0x700 ~ 0x719*/
+	uint reserved4[0xe6];
+
+	struct dc_winbuf_reg winbuf;	/* WINBUF A/B/C 0x800 ~ 0x80d */
+};
+
+/* DC_CMD_DISPLAY_COMMAND 0x032 */
+#define CTRL_MODE_SHIFT		5
+#define CTRL_MODE_MASK		(0x3 << CTRL_MODE_SHIFT)
+enum {
+	CTRL_MODE_STOP,
+	CTRL_MODE_C_DISPLAY,
+	CTRL_MODE_NC_DISPLAY,
+};
+
+/* _WIN_COLOR_DEPTH_0 */
+enum win_color_depth_id {
+	COLOR_DEPTH_P1,
+	COLOR_DEPTH_P2,
+	COLOR_DEPTH_P4,
+	COLOR_DEPTH_P8,
+	COLOR_DEPTH_B4G4R4A4,
+	COLOR_DEPTH_B5G5R5A,
+	COLOR_DEPTH_B5G6R5,
+	COLOR_DEPTH_AB5G5R5,
+	COLOR_DEPTH_B8G8R8A8 = 12,
+	COLOR_DEPTH_R8G8B8A8,
+	COLOR_DEPTH_B6x2G6x2R6x2A8,
+	COLOR_DEPTH_R6x2G6x2B6x2A8,
+	COLOR_DEPTH_YCbCr422,
+	COLOR_DEPTH_YUV422,
+	COLOR_DEPTH_YCbCr420P,
+	COLOR_DEPTH_YUV420P,
+	COLOR_DEPTH_YCbCr422P,
+	COLOR_DEPTH_YUV422P,
+	COLOR_DEPTH_YCbCr422R,
+	COLOR_DEPTH_YUV422R,
+	COLOR_DEPTH_YCbCr422RA,
+	COLOR_DEPTH_YUV422RA,
+};
+
+/* DC_CMD_DISPLAY_POWER_CONTROL 0x036 */
+#define PW0_ENABLE		BIT(0)
+#define PW1_ENABLE		BIT(2)
+#define PW2_ENABLE		BIT(4)
+#define PW3_ENABLE		BIT(6)
+#define PW4_ENABLE		BIT(8)
+#define PM0_ENABLE		BIT(16)
+#define PM1_ENABLE		BIT(18)
+#define SPI_ENABLE		BIT(24)
+#define HSPI_ENABLE		BIT(25)
+
+/* DC_CMD_STATE_ACCESS 0x040 */
+#define  READ_MUX_ASSEMBLY	(0 << 0)
+#define  READ_MUX_ACTIVE	(1 << 0)
+#define  WRITE_MUX_ASSEMBLY	(0 << 2)
+#define  WRITE_MUX_ACTIVE	(1 << 2)
+
+/* DC_CMD_STATE_CONTROL 0x041 */
+#define GENERAL_ACT_REQ		BIT(0)
+#define WIN_A_ACT_REQ		BIT(1)
+#define WIN_B_ACT_REQ		BIT(2)
+#define WIN_C_ACT_REQ		BIT(3)
+#define WIN_D_ACT_REQ		BIT(4)
+#define WIN_H_ACT_REQ		BIT(5)
+#define CURSOR_ACT_REQ		BIT(7)
+#define GENERAL_UPDATE		BIT(8)
+#define WIN_A_UPDATE		BIT(9)
+#define WIN_B_UPDATE		BIT(10)
+#define WIN_C_UPDATE		BIT(11)
+#define WIN_D_UPDATE		BIT(12)
+#define WIN_H_UPDATE		BIT(13)
+#define CURSOR_UPDATE		BIT(15)
+#define NC_HOST_TRIG		BIT(24)
+
+/* DC_CMD_DISPLAY_WINDOW_HEADER 0x042 */
+#define WINDOW_A_SELECT		BIT(4)
+#define WINDOW_B_SELECT		BIT(5)
+#define WINDOW_C_SELECT		BIT(6)
+#define	WINDOW_D_SELECT		BIT(7)
+#define	WINDOW_H_SELECT		BIT(8)
+
+/* DC_DISP_DISP_WIN_OPTIONS 0x402 */
+#define	CURSOR_ENABLE		BIT(16)
+#define	SOR_ENABLE		BIT(25)
+#define	TVO_ENABLE		BIT(28)
+#define	DSI_ENABLE		BIT(29)
+#define	HDMI_ENABLE		BIT(30)
+
+/* DC_DISP_DISP_TIMING_OPTIONS 0x405 */
+#define	VSYNC_H_POSITION(x)	((x) & 0xfff)
+
+/* DC_DISP_DISP_CLOCK_CONTROL 0x42e */
+#define SHIFT_CLK_DIVIDER_SHIFT	0
+#define SHIFT_CLK_DIVIDER_MASK	(0xff << SHIFT_CLK_DIVIDER_SHIFT)
+#define	PIXEL_CLK_DIVIDER_SHIFT	8
+#define	PIXEL_CLK_DIVIDER_MSK	(0xf << PIXEL_CLK_DIVIDER_SHIFT)
+enum {
+	PIXEL_CLK_DIVIDER_PCD1,
+	PIXEL_CLK_DIVIDER_PCD1H,
+	PIXEL_CLK_DIVIDER_PCD2,
+	PIXEL_CLK_DIVIDER_PCD3,
+	PIXEL_CLK_DIVIDER_PCD4,
+	PIXEL_CLK_DIVIDER_PCD6,
+	PIXEL_CLK_DIVIDER_PCD8,
+	PIXEL_CLK_DIVIDER_PCD9,
+	PIXEL_CLK_DIVIDER_PCD12,
+	PIXEL_CLK_DIVIDER_PCD16,
+	PIXEL_CLK_DIVIDER_PCD18,
+	PIXEL_CLK_DIVIDER_PCD24,
+	PIXEL_CLK_DIVIDER_PCD13,
+};
+
+/* DC_DISP_DISP_INTERFACE_CONTROL 0x42f */
+#define DATA_FORMAT_SHIFT	0
+#define DATA_FORMAT_MASK	(0xf << DATA_FORMAT_SHIFT)
+enum {
+	DATA_FORMAT_DF1P1C,
+	DATA_FORMAT_DF1P2C24B,
+	DATA_FORMAT_DF1P2C18B,
+	DATA_FORMAT_DF1P2C16B,
+	DATA_FORMAT_DF2S,
+	DATA_FORMAT_DF3S,
+	DATA_FORMAT_DFSPI,
+	DATA_FORMAT_DF1P3C24B,
+	DATA_FORMAT_DF1P3C18B,
+};
+#define DATA_ALIGNMENT_SHIFT	8
+enum {
+	DATA_ALIGNMENT_MSB,
+	DATA_ALIGNMENT_LSB,
+};
+#define DATA_ORDER_SHIFT	9
+enum {
+	DATA_ORDER_RED_BLUE,
+	DATA_ORDER_BLUE_RED,
+};
+
+/* DC_DISP_DATA_ENABLE_OPTIONS 0x432 */
+#define DE_SELECT_SHIFT		0
+#define DE_SELECT_MASK		(0x3 << DE_SELECT_SHIFT)
+#define DE_SELECT_ACTIVE_BLANK	0x0
+#define DE_SELECT_ACTIVE	0x1
+#define DE_SELECT_ACTIVE_IS	0x2
+#define DE_CONTROL_SHIFT	2
+#define DE_CONTROL_MASK		(0x7 << DE_CONTROL_SHIFT)
+enum {
+	DE_CONTROL_ONECLK,
+	DE_CONTROL_NORMAL,
+	DE_CONTROL_EARLY_EXT,
+	DE_CONTROL_EARLY,
+	DE_CONTROL_ACTIVE_BLANK,
+};
+
+/* DC_WIN_WIN_OPTIONS 0x700 */
+#define H_DIRECTION		BIT(0)
+enum {
+	H_DIRECTION_INCREMENT,
+	H_DIRECTION_DECREMENT,
+};
+#define V_DIRECTION		BIT(2)
+enum {
+	V_DIRECTION_INCREMENT,
+	V_DIRECTION_DECREMENT,
+};
+#define COLOR_EXPAND		BIT(6)
+#define CP_ENABLE		BIT(16)
+#define DV_ENABLE		BIT(20)
+#define WIN_ENABLE		BIT(30)
+
+/* DC_WIN_BYTE_SWAP 0x701 */
+#define BYTE_SWAP_SHIFT		0
+#define BYTE_SWAP_MASK		(3 << BYTE_SWAP_SHIFT)
+enum {
+	BYTE_SWAP_NOSWAP,
+	BYTE_SWAP_SWAP2,
+	BYTE_SWAP_SWAP4,
+	BYTE_SWAP_SWAP4HW
+};
+
+/* DC_WIN_POSITION 0x704 */
+#define H_POSITION_SHIFT	0
+#define H_POSITION_MASK		(0x1FFF << H_POSITION_SHIFT)
+#define V_POSITION_SHIFT	16
+#define V_POSITION_MASK		(0x1FFF << V_POSITION_SHIFT)
+
+/* DC_WIN_SIZE 0x705 */
+#define H_SIZE_SHIFT		0
+#define H_SIZE_MASK		(0x1FFF << H_SIZE_SHIFT)
+#define V_SIZE_SHIFT		16
+#define V_SIZE_MASK		(0x1FFF << V_SIZE_SHIFT)
+
+/* DC_WIN_PRESCALED_SIZE 0x706 */
+#define H_PRESCALED_SIZE_SHIFT	0
+#define H_PRESCALED_SIZE_MASK	(0x7FFF << H_PRESCALED_SIZE)
+#define V_PRESCALED_SIZE_SHIFT	16
+#define V_PRESCALED_SIZE_MASK	(0x1FFF << V_PRESCALED_SIZE)
+
+/* DC_WIN_DDA_INCREMENT 0x709 */
+#define H_DDA_INC_SHIFT		0
+#define H_DDA_INC_MASK		(0xFFFF << H_DDA_INC_SHIFT)
+#define V_DDA_INC_SHIFT		16
+#define V_DDA_INC_MASK		(0xFFFF << V_DDA_INC_SHIFT)
+
+#define DC_POLL_TIMEOUT_MS		50
+#define DC_N_WINDOWS			5
+#define DC_REG_SAVE_SPACE		(DC_N_WINDOWS + 5)
+
+#endif /* __ASM_ARCH_TEGRA_DC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/funcmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/funcmux.h
new file mode 100644
index 000000000..cf3ce3b41
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/funcmux.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra high-level function multiplexing */
+
+#ifndef _TEGRA_FUNCMUX_H_
+#define _TEGRA_FUNCMUX_H_
+
+/**
+ * Select a config for a particular peripheral.
+ *
+ * Each peripheral can operate through a number of configurations,
+ * which are sets of pins that it uses to bring out its signals.
+ * The basic config is 0, and higher numbers indicate different
+ * pinmux settings to bring the peripheral out on other pins,
+ *
+ * This function also disables tristate for the function's pins,
+ * so that they operate in normal mode.
+ *
+ * @param id		Peripheral id
+ * @param config	Configuration to use (FUNCMUX_...), 0 for default
+ * @return 0 if ok, -1 on error (e.g. incorrect id or config)
+ */
+int funcmux_select(enum periph_id id, int config);
+
+#endif	/* _TEGRA_FUNCMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/fuse.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/fuse.h
new file mode 100644
index 000000000..5b8e0bd8d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/fuse.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _FUSE_H_
+#define _FUSE_H_
+
+/* FUSE registers */
+struct fuse_regs {
+	u32 reserved0[64];		/* 0x00 - 0xFC: */
+	u32 production_mode;		/* 0x100: FUSE_PRODUCTION_MODE */
+	u32 reserved1[3];		/* 0x104 - 0x10c: */
+	u32 sku_info;			/* 0x110 */
+	u32 reserved2[13];		/* 0x114 - 0x144: */
+	u32 fa;				/* 0x148: FUSE_FA */
+	u32 reserved3[21];		/* 0x14C - 0x19C: */
+	u32 security_mode;		/* 0x1A0: FUSE_SECURITY_MODE */
+};
+
+#endif	/* ifndef _FUSE_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/gp_padctrl.h
new file mode 100644
index 000000000..4362c53d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/gp_padctrl.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010-2015
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA_GP_PADCTRL_H_
+#define _TEGRA_GP_PADCTRL_H_
+
+#define GP_HIDREV			0x804
+
+/* bit fields definitions for APB_MISC_GP_HIDREV register */
+#define HIDREV_CHIPID_SHIFT		8
+#define HIDREV_CHIPID_MASK		(0xff << HIDREV_CHIPID_SHIFT)
+#define HIDREV_MAJORPREV_SHIFT		4
+#define HIDREV_MAJORPREV_MASK		(0xf << HIDREV_MAJORPREV_SHIFT)
+
+/* CHIPID field returned from APB_MISC_GP_HIDREV register */
+#define CHIPID_TEGRA20			0x20
+#define CHIPID_TEGRA30			0x30
+#define CHIPID_TEGRA114			0x35
+#define CHIPID_TEGRA124			0x40
+#define CHIPID_TEGRA210			0x21
+
+#endif	/* _TEGRA_GP_PADCTRL_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/gpio.h
new file mode 100644
index 000000000..fe7b3a50e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/gpio.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011, Google Inc. All rights reserved.
+ */
+
+#ifndef _TEGRA_GPIO_H_
+#define _TEGRA_GPIO_H_
+
+#include <dt-bindings/gpio/tegra-gpio.h>
+
+#define TEGRA_GPIOS_PER_PORT	8
+#define TEGRA_PORTS_PER_BANK	4
+#define MAX_NUM_GPIOS           (TEGRA_GPIO_PORTS * TEGRA_GPIO_BANKS * 8)
+#define GPIO_NAME_SIZE		20	/* gpio_request max label len */
+
+#define GPIO_BANK(x)		((x) >> 5)
+#define GPIO_PORT(x)		(((x) >> 3) & 0x3)
+#define GPIO_FULLPORT(x)	((x) >> 3)
+#define GPIO_BIT(x)		((x) & 0x7)
+
+enum tegra_gpio_init {
+	TEGRA_GPIO_INIT_IN,
+	TEGRA_GPIO_INIT_OUT0,
+	TEGRA_GPIO_INIT_OUT1,
+};
+
+struct tegra_gpio_config {
+	u32 gpio:16;
+	u32 init:2;
+};
+
+/**
+ * Configure a list of GPIOs
+ *
+ * @param config	List of GPIO configurations
+ * @param len		Number of config items in list
+ */
+void gpio_config_table(const struct tegra_gpio_config *config, int len);
+
+#endif	/* TEGRA_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/gpu.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/gpu.h
new file mode 100644
index 000000000..d4d6deb49
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/gpu.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2015
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef __ASM_ARCH_TEGRA_GPU_H
+#define __ASM_ARCH_TEGRA_GPU_H
+
+#if defined(CONFIG_TEGRA_GPU)
+
+void tegra_gpu_config(void);
+
+#else /* CONFIG_TEGRA_GPU */
+
+static inline void tegra_gpu_config(void)
+{
+}
+
+#endif /* CONFIG_TEGRA_GPU */
+
+#if defined(CONFIG_OF_LIBFDT)
+
+int tegra_gpu_enable_node(void *blob, const char *gpupath);
+
+#else /* CONFIG_OF_LIBFDT */
+
+static inline int tegra_gpu_enable_node(void *blob, const char *compat)
+{
+	return 0;
+}
+
+#endif /* CONFIG_OF_LIBFDT */
+
+#endif	/* __ASM_ARCH_TEGRA_GPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/ivc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/ivc.h
new file mode 100644
index 000000000..52c10b8fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/ivc.h
@@ -0,0 +1,176 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ */
+
+#ifndef _ASM_ARCH_TEGRA_IVC_H
+#define _ASM_ARCH_TEGRA_IVC_H
+
+/*
+ * Tegra IVC is a communication protocol that transfers fixed-size frames
+ * bi-directionally and in-order between the local CPU and some remote entity.
+ * Communication is via a statically sized and allocated buffer in shared
+ * memory and a notification mechanism.
+ *
+ * This API handles all aspects of the shared memory buffer's metadata, and
+ * leaves all aspects of the frame content to the calling code; frames
+ * typically contain some higher-level protocol. The notification mechanism is
+ * also handled externally to this API, since it can vary from instance to
+ * instance.
+ *
+ * The client model is to first find some free (for TX) or filled (for RX)
+ * frame, process that frame's memory buffer (fill or read it), and then
+ * inform the protocol that the frame has been filled/read, i.e. advance the
+ * write/read pointer. If the channel is full, there may be no available frames
+ * to fill/read. In this case, client code may either poll for an available
+ * frame, or wait for the remote entity to send a notification to the local
+ * CPU.
+ */
+
+/**
+ * struct tegra_ivc - In-memory shared memory layout.
+ *
+ * This is described in detail in ivc.c.
+ */
+struct tegra_ivc_channel_header;
+
+/**
+ * struct tegra_ivc - Software state of an IVC channel.
+ *
+ * This state is internal to the IVC code and should not be accessed directly
+ * by clients. It is public solely so clients can allocate storage for the
+ * structure.
+ */
+struct tegra_ivc {
+	/**
+	 * rx_channel - Pointer to the shared memory region used to receive
+	 * messages from the remote entity.
+	 */
+	struct tegra_ivc_channel_header *rx_channel;
+	/**
+	 * tx_channel - Pointer to the shared memory region used to send
+	 * messages to the remote entity.
+	 */
+	struct tegra_ivc_channel_header *tx_channel;
+	/**
+	 * r_pos - The position in list of frames in rx_channel that we are
+	 * reading from.
+	 */
+	uint32_t r_pos;
+	/**
+	 * w_pos - The position in list of frames in tx_channel that we are
+	 * writing to.
+	 */
+	uint32_t w_pos;
+	/**
+	 * nframes - The number of frames allocated (in each direction) in
+	 * shared memory.
+	 */
+	uint32_t nframes;
+	/**
+	 * frame_size - The size of each frame in shared memory.
+	 */
+	uint32_t frame_size;
+	/**
+	 * notify - Function to call to notify the remote processor of a
+	 * change in channel state.
+	 */
+	void (*notify)(struct tegra_ivc *);
+};
+
+/**
+ * tegra_ivc_read_get_next_frame - Locate the next frame to receive.
+ *
+ * Locate the next frame to be received/processed, return the address of the
+ * frame, and do not remove it from the queue. Repeated calls to this function
+ * will return the same address until tegra_ivc_read_advance() is called.
+ *
+ * @ivc		The IVC channel.
+ * @frame	Pointer to be filled with the address of the frame to receive.
+ *
+ * @return 0 if a frame is available, else a negative error code.
+ */
+int tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc, void **frame);
+
+/**
+ * tegra_ivc_read_advance - Advance the read queue.
+ *
+ * Inform the protocol and remote entity that the frame returned by
+ * tegra_ivc_read_get_next_frame() has been processed. The remote end may then
+ * re-use it to transmit further data. Subsequent to this function returning,
+ * tegra_ivc_read_get_next_frame() will return a different frame.
+ *
+ * @ivc		The IVC channel.
+ *
+ * @return 0 if OK, else a negative error code.
+ */
+int tegra_ivc_read_advance(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_write_get_next_frame - Locate the next frame to fill for transmit.
+ *
+ * Locate the next frame to be filled for transmit, return the address of the
+ * frame, and do not add it to the queue. Repeated calls to this function
+ * will return the same address until tegra_ivc_read_advance() is called.
+ *
+ * @ivc		The IVC channel.
+ * @frame	Pointer to be filled with the address of the frame to fill.
+ *
+ * @return 0 if a frame is available, else a negative error code.
+ */
+int tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc, void **frame);
+
+/**
+ * tegra_ivc_write_advance - Advance the write queue.
+ *
+ * Inform the protocol and remote entity that the frame returned by
+ * tegra_ivc_write_get_next_frame() has been filled and should be transmitted.
+ * The remote end may then read data from it. Subsequent to this function
+ * returning, tegra_ivc_write_get_next_frame() will return a different frame.
+ *
+ * @ivc		The IVC channel.
+ *
+ * @return 0 if OK, else a negative error code.
+ */
+int tegra_ivc_write_advance(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_channel_notified - handle internal messages
+ *
+ * This function must be called following every notification.
+ *
+ * @ivc		The IVC channel.
+ *
+ * @return 0 if the channel is ready for communication, or -EAGAIN if a
+ * channel reset is in progress.
+ */
+int tegra_ivc_channel_notified(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_channel_reset - initiates a reset of the shared memory state
+ *
+ * This function must be called after a channel is initialized but before it
+ * is used for communication. The channel will be ready for use when a
+ * subsequent call to notify the remote of the channel reset indicates the
+ * reset operation is complete.
+ *
+ * @ivc		The IVC channel.
+ */
+void tegra_ivc_channel_reset(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_init - Initialize a channel's software state.
+ *
+ * @ivc		The IVC channel.
+ * @rx_base	Address of the the RX shared memory buffer.
+ * @tx_base	Address of the the TX shared memory buffer.
+ * @nframes	Number of frames in each shared memory buffer.
+ * @frame_size	Size of each frame.
+ *
+ * @return 0 if OK, else a negative error code.
+ */
+int tegra_ivc_init(struct tegra_ivc *ivc, ulong rx_base, ulong tx_base,
+		   uint32_t nframes, uint32_t frame_size,
+		   void (*notify)(struct tegra_ivc *));
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/pinmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/pinmux.h
new file mode 100644
index 000000000..4b6e84195
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/pinmux.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2014
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA_PINMUX_H_
+#define _TEGRA_PINMUX_H_
+
+#include <linux/types.h>
+
+#include <asm/arch/tegra.h>
+
+/* The pullup/pulldown state of a pin group */
+enum pmux_pull {
+	PMUX_PULL_NORMAL = 0,
+	PMUX_PULL_DOWN,
+	PMUX_PULL_UP,
+};
+
+/* Defines whether a pin group is tristated or in normal operation */
+enum pmux_tristate {
+	PMUX_TRI_NORMAL = 0,
+	PMUX_TRI_TRISTATE = 1,
+};
+
+#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
+enum pmux_pin_io {
+	PMUX_PIN_OUTPUT = 0,
+	PMUX_PIN_INPUT = 1,
+	PMUX_PIN_NONE,
+};
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_LOCK
+enum pmux_pin_lock {
+	PMUX_PIN_LOCK_DEFAULT = 0,
+	PMUX_PIN_LOCK_DISABLE,
+	PMUX_PIN_LOCK_ENABLE,
+};
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_OD
+enum pmux_pin_od {
+	PMUX_PIN_OD_DEFAULT = 0,
+	PMUX_PIN_OD_DISABLE,
+	PMUX_PIN_OD_ENABLE,
+};
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET
+enum pmux_pin_ioreset {
+	PMUX_PIN_IO_RESET_DEFAULT = 0,
+	PMUX_PIN_IO_RESET_DISABLE,
+	PMUX_PIN_IO_RESET_ENABLE,
+};
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL
+enum pmux_pin_rcv_sel {
+	PMUX_PIN_RCV_SEL_DEFAULT = 0,
+	PMUX_PIN_RCV_SEL_NORMAL,
+	PMUX_PIN_RCV_SEL_HIGH,
+};
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV
+enum pmux_pin_e_io_hv {
+	PMUX_PIN_E_IO_HV_DEFAULT = 0,
+	PMUX_PIN_E_IO_HV_NORMAL,
+	PMUX_PIN_E_IO_HV_HIGH,
+};
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+/* Defines a pin group cfg's low-power mode select */
+enum pmux_lpmd {
+	PMUX_LPMD_X8 = 0,
+	PMUX_LPMD_X4,
+	PMUX_LPMD_X2,
+	PMUX_LPMD_X,
+	PMUX_LPMD_NONE = -1,
+};
+#endif
+
+#if defined(TEGRA_PMX_PINS_HAVE_SCHMT) || defined(TEGRA_PMX_GRPS_HAVE_SCHMT)
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pmux_schmt {
+	PMUX_SCHMT_DISABLE = 0,
+	PMUX_SCHMT_ENABLE = 1,
+	PMUX_SCHMT_NONE = -1,
+};
+#endif
+
+#if defined(TEGRA_PMX_PINS_HAVE_HSM) || defined(TEGRA_PMX_GRPS_HAVE_HSM)
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pmux_hsm {
+	PMUX_HSM_DISABLE = 0,
+	PMUX_HSM_ENABLE = 1,
+	PMUX_HSM_NONE = -1,
+};
+#endif
+
+/*
+ * This defines the configuration for a pin, including the function assigned,
+ * pull up/down settings and tristate settings. Having set up one of these
+ * you can call pinmux_config_pingroup() to configure a pin in one step. Also
+ * available is pinmux_config_table() to configure a list of pins.
+ */
+struct pmux_pingrp_config {
+	u32 pingrp:16;		/* pin group PMUX_PINGRP_...        */
+	u32 func:8;		/* function to assign PMUX_FUNC_... */
+	u32 pull:2;		/* pull up/down/normal PMUX_PULL_...*/
+	u32 tristate:2;		/* tristate or normal PMUX_TRI_...  */
+#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
+	u32 io:2;		/* input or output PMUX_PIN_...     */
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_LOCK
+	u32 lock:2;		/* lock enable/disable PMUX_PIN...  */
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_OD
+	u32 od:2;		/* open-drain or push-pull driver   */
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET
+	u32 ioreset:2;		/* input/output reset PMUX_PIN...   */
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL
+	u32 rcv_sel:2;		/* select between High and Normal  */
+				/* VIL/VIH receivers */
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV
+	u32 e_io_hv:2;		/* select 3.3v tolerant receivers */
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_SCHMT
+	u32 schmt:2;		/* schmitt enable            */
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_HSM
+	u32 hsm:2;		/* high-speed mode enable    */
+#endif
+};
+
+#ifdef TEGRA_PMX_SOC_HAS_IO_CLAMPING
+/* Set/clear the pinmux CLAMP_INPUTS_WHEN_TRISTATED bit */
+void pinmux_set_tristate_input_clamping(void);
+void pinmux_clear_tristate_input_clamping(void);
+#endif
+
+/* Set the mux function for a pin group */
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
+
+/* Set the pull up/down feature for a pin group */
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
+
+/* Set a pin group to tristate */
+void pinmux_tristate_enable(enum pmux_pingrp pin);
+
+/* Set a pin group to normal (non tristate) */
+void pinmux_tristate_disable(enum pmux_pingrp pin);
+
+#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
+/* Set a pin group as input or output */
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
+#endif
+
+/**
+ * Configure a list of pin groups
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config,
+				int len);
+
+struct pmux_pingrp_desc {
+	u8 funcs[4];
+#if defined(CONFIG_TEGRA20)
+	u8 ctl_id;
+	u8 pull_id;
+#endif /* CONFIG_TEGRA20 */
+};
+
+extern const struct pmux_pingrp_desc *tegra_soc_pingroups;
+
+#ifdef TEGRA_PMX_SOC_HAS_DRVGRPS
+
+#define PMUX_SLWF_MIN	0
+#define PMUX_SLWF_MAX	3
+#define PMUX_SLWF_NONE	-1
+
+#define PMUX_SLWR_MIN	0
+#define PMUX_SLWR_MAX	3
+#define PMUX_SLWR_NONE	-1
+
+#define PMUX_DRVUP_MIN	0
+#define PMUX_DRVUP_MAX	127
+#define PMUX_DRVUP_NONE	-1
+
+#define PMUX_DRVDN_MIN	0
+#define PMUX_DRVDN_MAX	127
+#define PMUX_DRVDN_NONE	-1
+
+/*
+ * This defines the configuration for a pin group's pad control config
+ */
+struct pmux_drvgrp_config {
+	u32 drvgrp:16;	/* pin group PMUX_DRVGRP_x   */
+	u32 slwf:3;		/* falling edge slew         */
+	u32 slwr:3;		/* rising edge slew          */
+	u32 drvup:8;		/* pull-up drive strength    */
+	u32 drvdn:8;		/* pull-down drive strength  */
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+	u32 lpmd:3;		/* low-power mode selection  */
+#endif
+#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
+	u32 schmt:2;		/* schmidt enable            */
+#endif
+#ifdef TEGRA_PMX_GRPS_HAVE_HSM
+	u32 hsm:2;		/* high-speed mode enable    */
+#endif
+};
+
+/**
+ * Set the GP pad configs
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config,
+				int len);
+
+#endif /* TEGRA_PMX_SOC_HAS_DRVGRPS */
+
+#ifdef TEGRA_PMX_SOC_HAS_MIPI_PAD_CTRL_GRPS
+struct pmux_mipipadctrlgrp_config {
+	u32 grp:16;	/* pin group PMUX_MIPIPADCTRLGRP_x   */
+	u32 func:8;	/* function to assign PMUX_FUNC_... */
+};
+
+void pinmux_config_mipipadctrlgrp_table(
+	const struct pmux_mipipadctrlgrp_config *config, int len);
+
+struct pmux_mipipadctrlgrp_desc {
+	u8 funcs[2];
+};
+
+extern const struct pmux_mipipadctrlgrp_desc *tegra_soc_mipipadctrl_groups;
+#endif /* TEGRA_PMX_SOC_HAS_MIPI_PAD_CTRL_GRPS */
+
+#endif /* _TEGRA_PINMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/pmc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/pmc.h
new file mode 100644
index 000000000..e1f5a7381
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/pmc.h
@@ -0,0 +1,413 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010-2019
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _PMC_H_
+#define _PMC_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/* Power Management Controller (APBDEV_PMC_) registers */
+struct pmc_ctlr {
+	uint pmc_cntrl;			/* _CNTRL_0, offset 00 */
+	uint pmc_sec_disable;		/* _SEC_DISABLE_0, offset 04 */
+	uint pmc_pmc_swrst;		/* _PMC_SWRST_0, offset 08 */
+	uint pmc_wake_mask;		/* _WAKE_MASK_0, offset 0C */
+	uint pmc_wake_lvl;		/* _WAKE_LVL_0, offset 10 */
+	uint pmc_wake_status;		/* _WAKE_STATUS_0, offset 14 */
+	uint pmc_sw_wake_status;	/* _SW_WAKE_STATUS_0, offset 18 */
+	uint pmc_dpd_pads_oride;	/* _DPD_PADS_ORIDE_0, offset 1C */
+	uint pmc_dpd_sample;		/* _DPD_PADS_SAMPLE_0, offset 20 */
+	uint pmc_dpd_enable;		/* _DPD_PADS_ENABLE_0, offset 24 */
+	uint pmc_pwrgate_timer_off;	/* _PWRGATE_TIMER_OFF_0, offset 28 */
+#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30)
+	uint pmc_pwrgate_timer_on;	/* _PWRGATE_TIMER_ON_0, offset 2C */
+#else
+	uint pmc_clamp_status;		/* _CLAMP_STATUS_0, offset 2C */
+#endif
+	uint pmc_pwrgate_toggle;	/* _PWRGATE_TOGGLE_0, offset 30 */
+	uint pmc_remove_clamping;	/* _REMOVE_CLAMPING_CMD_0, offset 34 */
+	uint pmc_pwrgate_status;	/* _PWRGATE_STATUS_0, offset 38 */
+	uint pmc_pwrgood_timer;		/* _PWRGOOD_TIMER_0, offset 3C */
+	uint pmc_blink_timer;		/* _BLINK_TIMER_0, offset 40 */
+	uint pmc_no_iopower;		/* _NO_IOPOWER_0, offset 44 */
+	uint pmc_pwr_det;		/* _PWR_DET_0, offset 48 */
+	uint pmc_pwr_det_latch;		/* _PWR_DET_LATCH_0, offset 4C */
+
+	uint pmc_scratch0;		/* _SCRATCH0_0, offset 50 */
+	uint pmc_scratch1;		/* _SCRATCH1_0, offset 54 */
+	uint pmc_scratch2;		/* _SCRATCH2_0, offset 58 */
+	uint pmc_scratch3;		/* _SCRATCH3_0, offset 5C */
+	uint pmc_scratch4;		/* _SCRATCH4_0, offset 60 */
+	uint pmc_scratch5;		/* _SCRATCH5_0, offset 64 */
+	uint pmc_scratch6;		/* _SCRATCH6_0, offset 68 */
+	uint pmc_scratch7;		/* _SCRATCH7_0, offset 6C */
+	uint pmc_scratch8;		/* _SCRATCH8_0, offset 70 */
+	uint pmc_scratch9;		/* _SCRATCH9_0, offset 74 */
+	uint pmc_scratch10;		/* _SCRATCH10_0, offset 78 */
+	uint pmc_scratch11;		/* _SCRATCH11_0, offset 7C */
+	uint pmc_scratch12;		/* _SCRATCH12_0, offset 80 */
+	uint pmc_scratch13;		/* _SCRATCH13_0, offset 84 */
+	uint pmc_scratch14;		/* _SCRATCH14_0, offset 88 */
+	uint pmc_scratch15;		/* _SCRATCH15_0, offset 8C */
+	uint pmc_scratch16;		/* _SCRATCH16_0, offset 90 */
+	uint pmc_scratch17;		/* _SCRATCH17_0, offset 94 */
+	uint pmc_scratch18;		/* _SCRATCH18_0, offset 98 */
+	uint pmc_scratch19;		/* _SCRATCH19_0, offset 9C */
+	uint pmc_scratch20;		/* _SCRATCH20_0, offset A0 */
+	uint pmc_scratch21;		/* _SCRATCH21_0, offset A4 */
+	uint pmc_scratch22;		/* _SCRATCH22_0, offset A8 */
+	uint pmc_scratch23;		/* _SCRATCH23_0, offset AC */
+
+	uint pmc_secure_scratch0;	/* _SECURE_SCRATCH0_0, offset B0 */
+	uint pmc_secure_scratch1;	/* _SECURE_SCRATCH1_0, offset B4 */
+	uint pmc_secure_scratch2;	/* _SECURE_SCRATCH2_0, offset B8 */
+	uint pmc_secure_scratch3;	/* _SECURE_SCRATCH3_0, offset BC */
+	uint pmc_secure_scratch4;	/* _SECURE_SCRATCH4_0, offset C0 */
+	uint pmc_secure_scratch5;	/* _SECURE_SCRATCH5_0, offset C4 */
+
+	uint pmc_cpupwrgood_timer;	/* _CPUPWRGOOD_TIMER_0, offset C8 */
+	uint pmc_cpupwroff_timer;	/* _CPUPWROFF_TIMER_0, offset CC */
+	uint pmc_pg_mask;		/* _PG_MASK_0, offset D0 */
+	uint pmc_pg_mask_1;		/* _PG_MASK_1_0, offset D4 */
+	uint pmc_auto_wake_lvl;		/* _AUTO_WAKE_LVL_0, offset D8 */
+	uint pmc_auto_wake_lvl_mask;	/* _AUTO_WAKE_LVL_MASK_0, offset DC */
+	uint pmc_wake_delay;		/* _WAKE_DELAY_0, offset E0 */
+	uint pmc_pwr_det_val;		/* _PWR_DET_VAL_0, offset E4 */
+	uint pmc_ddr_pwr;		/* _DDR_PWR_0, offset E8 */
+	uint pmc_usb_debounce_del;	/* _USB_DEBOUNCE_DEL_0, offset EC */
+	uint pmc_usb_ao;		/* _USB_AO_0, offset F0 */
+	uint pmc_crypto_op;		/* _CRYPTO_OP__0, offset F4 */
+	uint pmc_pllp_wb0_override;	/* _PLLP_WB0_OVERRIDE_0, offset F8 */
+
+	uint pmc_scratch24;		/* _SCRATCH24_0, offset FC */
+	uint pmc_scratch25;		/* _SCRATCH24_0, offset 100 */
+	uint pmc_scratch26;		/* _SCRATCH24_0, offset 104 */
+	uint pmc_scratch27;		/* _SCRATCH24_0, offset 108 */
+	uint pmc_scratch28;		/* _SCRATCH24_0, offset 10C */
+	uint pmc_scratch29;		/* _SCRATCH24_0, offset 110 */
+	uint pmc_scratch30;		/* _SCRATCH24_0, offset 114 */
+	uint pmc_scratch31;		/* _SCRATCH24_0, offset 118 */
+	uint pmc_scratch32;		/* _SCRATCH24_0, offset 11C */
+	uint pmc_scratch33;		/* _SCRATCH24_0, offset 120 */
+	uint pmc_scratch34;		/* _SCRATCH24_0, offset 124 */
+	uint pmc_scratch35;		/* _SCRATCH24_0, offset 128 */
+	uint pmc_scratch36;		/* _SCRATCH24_0, offset 12C */
+	uint pmc_scratch37;		/* _SCRATCH24_0, offset 130 */
+	uint pmc_scratch38;		/* _SCRATCH24_0, offset 134 */
+	uint pmc_scratch39;		/* _SCRATCH24_0, offset 138 */
+	uint pmc_scratch40;		/* _SCRATCH24_0, offset 13C */
+	uint pmc_scratch41;		/* _SCRATCH24_0, offset 140 */
+	uint pmc_scratch42;		/* _SCRATCH24_0, offset 144 */
+
+	uint pmc_bo_mirror0;		/* _BOUNDOUT_MIRROR0_0, offset 148 */
+	uint pmc_bo_mirror1;		/* _BOUNDOUT_MIRROR1_0, offset 14C */
+	uint pmc_bo_mirror2;		/* _BOUNDOUT_MIRROR2_0, offset 150 */
+	uint pmc_sys_33v_en;		/* _SYS_33V_EN_0, offset 154 */
+	uint pmc_bo_mirror_access;	/* _BOUNDOUT_MIRROR_ACCESS_0, off158 */
+	uint pmc_gate;			/* _GATE_0, offset 15C */
+	/* The following fields are in Tegra124 and later only */
+	uint pmc_wake2_mask;		/* _WAKE2_MASK_0, offset 160 */
+	uint pmc_wake2_lvl;		/* _WAKE2_LVL_0,  offset 164 */
+	uint pmc_wake2_stat;		/* _WAKE2_STATUS_0, offset 168 */
+	uint pmc_sw_wake2_stat;		/* _SW_WAKE2_STATUS_0, offset 16C */
+	uint pmc_auto_wake2_lvl_mask;	/* _AUTO_WAKE2_LVL_MASK_0, offset 170 */
+	uint pmc_pg_mask2;		/* _PG_MASK_2_0, offset 174 */
+	uint pmc_pg_mask_ce1;		/* _PG_MASK_CE1_0, offset 178 */
+	uint pmc_pg_mask_ce2;		/* _PG_MASK_CE2_0, offset 17C */
+	uint pmc_pg_mask_ce3;		/* _PG_MASK_CE3_0, offset 180 */
+	uint pmc_pwrgate_timer_ce0;	/* _PWRGATE_TIMER_CE_0_0, offset 184 */
+	uint pmc_pwrgate_timer_ce1;	/* _PWRGATE_TIMER_CE_1_0, offset 188 */
+	uint pmc_pwrgate_timer_ce2;	/* _PWRGATE_TIMER_CE_2_0, offset 18C */
+	uint pmc_pwrgate_timer_ce3;	/* _PWRGATE_TIMER_CE_3_0, offset 190 */
+	uint pmc_pwrgate_timer_ce4;	/* _PWRGATE_TIMER_CE_4_0, offset 194 */
+	uint pmc_pwrgate_timer_ce5;	/* _PWRGATE_TIMER_CE_5_0, offset 198 */
+	uint pmc_pwrgate_timer_ce6;	/* _PWRGATE_TIMER_CE_6_0, offset 19C */
+	uint pmc_pcx_edpd_cntrl;	/* _PCX_EDPD_CNTRL_0, offset 1A0 */
+	uint pmc_osc_edpd_over;		/* _OSC_EDPD_OVER_0, offset 1A4 */
+	uint pmc_clk_out_cntrl;		/* _CLK_OUT_CNTRL_0, offset 1A8 */
+	uint pmc_sata_pwrgate;		/* _SATA_PWRGT_0, offset 1AC */
+	uint pmc_sensor_ctrl;		/* _SENSOR_CTRL_0, offset 1B0 */
+	uint pmc_reset_status;		/* _RTS_STATUS_0, offset 1B4 */
+	uint pmc_io_dpd_req;		/* _IO_DPD_REQ_0, offset 1B8 */
+	uint pmc_io_dpd_stat;		/* _IO_DPD_STATUS_0, offset 1BC */
+	uint pmc_io_dpd2_req;		/* _IO_DPD2_REQ_0, offset 1C0 */
+	uint pmc_io_dpd2_stat;		/* _IO_DPD2_STATUS_0, offset 1C4 */
+	uint pmc_sel_dpd_tim;		/* _SEL_DPD_TIM_0, offset 1C8 */
+	uint pmc_vddp_sel;		/* _VDDP_SEL_0, offset 1CC */
+
+	uint pmc_ddr_cfg;		/* _DDR_CFG_0, offset 1D0 */
+	uint pmc_e_no_vttgen;		/* _E_NO_VTTGEN_0, offset 1D4 */
+	uint pmc_reserved0;		/* _RESERVED, offset 1D8 */
+	uint pmc_pllm_wb0_ovrride_frq;	/* _PLLM_WB0_OVERRIDE_FREQ_0, off 1DC */
+	uint pmc_test_pwrgate;		/* _TEST_PWRGATE_0, offset 1E0 */
+	uint pmc_pwrgate_timer_mult;	/* _PWRGATE_TIMER_MULT_0, offset 1E4 */
+	uint pmc_dsi_sel_dpd;		/* _DSI_SEL_DPD_0, offset 1E8 */
+	uint pmc_utmip_uhsic_triggers;	/* _UTMIP_UHSIC_TRIGGERS_0, off 1EC */
+	uint pmc_utmip_uhsic_saved_st;  /* _UTMIP_UHSIC_SAVED_STATE_0, off1F0 */
+	uint pmc_utmip_pad_cfg;		/* _UTMIP_PAD_CFG_0, offset 1F4 */
+	uint pmc_utmip_term_pad_cfg;	/* _UTMIP_TERM_PAD_CFG_0, offset 1F8 */
+	uint pmc_utmip_uhsic_sleep_cfg;	/* _UTMIP_UHSIC_SLEEP_CFG_0, off 1FC */
+
+	uint pmc_todo_0[9];		/* offset 200-220 */
+	uint pmc_secure_scratch6;	/* _SECURE_SCRATCH6_0, offset 224 */
+	uint pmc_secure_scratch7;	/* _SECURE_SCRATCH7_0, offset 228 */
+	uint pmc_scratch43;		/* _SCRATCH43_0, offset 22C */
+	uint pmc_scratch44;		/* _SCRATCH44_0, offset 230 */
+	uint pmc_scratch45;
+	uint pmc_scratch46;
+	uint pmc_scratch47;
+	uint pmc_scratch48;
+	uint pmc_scratch49;
+	uint pmc_scratch50;
+	uint pmc_scratch51;
+	uint pmc_scratch52;
+	uint pmc_scratch53;
+	uint pmc_scratch54;
+	uint pmc_scratch55;		/* _SCRATCH55_0, offset 25C */
+	uint pmc_scratch0_eco;		/* _SCRATCH0_ECO_0, offset 260 */
+	uint pmc_por_dpd_ctrl;		/* _POR_DPD_CTRL_0, offset 264 */
+	uint pmc_scratch2_eco;		/* _SCRATCH2_ECO_0, offset 268 */
+	uint pmc_todo_1[17];		/* TODO: 26C ~ 2AC */
+	uint pmc_pllm_wb0_override2;	/* _PLLM_WB0_OVERRIDE2, offset 2B0 */
+	uint pmc_tsc_mult;		/* _TSC_MULT_0, offset 2B4 */
+	uint pmc_cpu_vsense_override;	/* _CPU_VSENSE_OVERRIDE_0, offset 2B8 */
+	uint pmc_glb_amap_cfg;		/* _GLB_AMAP_CFG_0, offset 2BC */
+	uint pmc_sticky_bits;		/* _STICKY_BITS_0, offset 2C0 */
+	uint pmc_sec_disable2;		/* _SEC_DISALBE2, offset 2C4 */
+	uint pmc_weak_bias;		/* _WEAK_BIAS_0, offset 2C8 */
+	uint pmc_todo_3[13];		/* TODO: 2CC ~ 2FC */
+	uint pmc_secure_scratch8;	/* _SECURE_SCRATCH8_0, offset 300 */
+	uint pmc_secure_scratch9;
+	uint pmc_secure_scratch10;
+	uint pmc_secure_scratch11;
+	uint pmc_secure_scratch12;
+	uint pmc_secure_scratch13;
+	uint pmc_secure_scratch14;
+	uint pmc_secure_scratch15;
+	uint pmc_secure_scratch16;
+	uint pmc_secure_scratch17;
+	uint pmc_secure_scratch18;
+	uint pmc_secure_scratch19;
+	uint pmc_secure_scratch20;
+	uint pmc_secure_scratch21;
+	uint pmc_secure_scratch22;
+	uint pmc_secure_scratch23;
+	uint pmc_secure_scratch24;	/* _SECURE_SCRATCH24_0, offset 340 */
+	uint pmc_secure_scratch25;
+	uint pmc_secure_scratch26;
+	uint pmc_secure_scratch27;
+	uint pmc_secure_scratch28;
+	uint pmc_secure_scratch29;
+	uint pmc_secure_scratch30;
+	uint pmc_secure_scratch31;
+	uint pmc_secure_scratch32;
+	uint pmc_secure_scratch33;
+	uint pmc_secure_scratch34;
+	uint pmc_secure_scratch35;	/* _SECURE_SCRATCH35_0, offset 36C */
+
+	uint pmc_reserved1[52];		/* RESERVED: 370 ~ 43C */
+	uint pmc_cntrl2;		/* _CNTRL2_0, offset 440 */
+	uint pmc_reserved2[6];		/* RESERVED: 444 ~ 458 */
+	uint pmc_io_dpd3_req;		/* _IO_DPD3_REQ_0, offset 45c */
+	uint pmc_io_dpd3_stat;		/* _IO_DPD3_STATUS_0, offset 460 */
+	uint pmc_strap_opt_a;		/* _STRAPPING_OPT_A_0, offset 464 */
+	uint pmc_reserved3[102];	/* RESERVED: 468 ~ 5FC */
+
+	uint pmc_scratch56;		/* _SCRATCH56_0, offset 600 */
+	uint pmc_scratch57;
+	uint pmc_scratch58;
+	uint pmc_scratch59;
+	uint pmc_scratch60;
+	uint pmc_scratch61;
+	uint pmc_scratch62;
+	uint pmc_scratch63;
+	uint pmc_scratch64;
+	uint pmc_scratch65;
+	uint pmc_scratch66;
+	uint pmc_scratch67;
+	uint pmc_scratch68;
+	uint pmc_scratch69;
+	uint pmc_scratch70;
+	uint pmc_scratch71;
+	uint pmc_scratch72;
+	uint pmc_scratch73;
+	uint pmc_scratch74;
+	uint pmc_scratch75;
+	uint pmc_scratch76;
+	uint pmc_scratch77;
+	uint pmc_scratch78;
+	uint pmc_scratch79;
+	uint pmc_scratch80;
+	uint pmc_scratch81;
+	uint pmc_scratch82;
+	uint pmc_scratch83;
+	uint pmc_scratch84;
+	uint pmc_scratch85;
+	uint pmc_scratch86;
+	uint pmc_scratch87;
+	uint pmc_scratch88;
+	uint pmc_scratch89;
+	uint pmc_scratch90;
+	uint pmc_scratch91;
+	uint pmc_scratch92;
+	uint pmc_scratch93;
+	uint pmc_scratch94;
+	uint pmc_scratch95;
+	uint pmc_scratch96;
+	uint pmc_scratch97;
+	uint pmc_scratch98;
+	uint pmc_scratch99;
+	uint pmc_scratch100;
+	uint pmc_scratch101;
+	uint pmc_scratch102;
+	uint pmc_scratch103;
+	uint pmc_scratch104;
+	uint pmc_scratch105;
+	uint pmc_scratch106;
+	uint pmc_scratch107;
+	uint pmc_scratch108;
+	uint pmc_scratch109;
+	uint pmc_scratch110;
+	uint pmc_scratch111;
+	uint pmc_scratch112;
+	uint pmc_scratch113;
+	uint pmc_scratch114;
+	uint pmc_scratch115;
+	uint pmc_scratch116;
+	uint pmc_scratch117;
+	uint pmc_scratch118;
+	uint pmc_scratch119;
+	uint pmc_scratch1_eco;	/* offset 700 */
+};
+
+#define CPU_PWRED	1
+#define CPU_CLMP	1
+
+#define PARTID_CP	0xFFFFFFF8
+#define START_CP	(1 << 8)
+
+#define CPUPWRREQ_OE	(1 << 16)
+#define CPUPWRREQ_POL	(1 << 15)
+
+#define CRAIL		0
+#define CE0		14
+#define C0NC		15
+#define SOR		17
+
+#define PMC_XOFS_SHIFT	1
+#define PMC_XOFS_MASK	(0x3F << PMC_XOFS_SHIFT)
+
+#if defined(CONFIG_TEGRA114)
+#define TIMER_MULT_SHIFT	0
+#define TIMER_MULT_MASK		(3 << TIMER_MULT_SHIFT)
+#define TIMER_MULT_CPU_SHIFT	2
+#define TIMER_MULT_CPU_MASK	(3 << TIMER_MULT_CPU_SHIFT)
+#elif defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210)
+#define TIMER_MULT_SHIFT	0
+#define TIMER_MULT_MASK		(7 << TIMER_MULT_SHIFT)
+#define TIMER_MULT_CPU_SHIFT	3
+#define TIMER_MULT_CPU_MASK	(7 << TIMER_MULT_CPU_SHIFT)
+#endif
+
+#define MULT_1			0
+#define MULT_2			1
+#define MULT_4			2
+#define MULT_8			3
+#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210)
+#define MULT_16			4
+#endif
+
+#define AMAP_WRITE_SHIFT	20
+#define AMAP_WRITE_ON		(1 << AMAP_WRITE_SHIFT)
+
+/* SEC_DISABLE_0, 0x04 */
+#define SEC_DISABLE_WRITE0_ON			(1 << 4)
+#define SEC_DISABLE_READ0_ON			(1 << 5)
+#define SEC_DISABLE_WRITE1_ON			(1 << 6)
+#define SEC_DISABLE_READ1_ON			(1 << 7)
+#define SEC_DISABLE_WRITE2_ON			(1 << 8)
+#define SEC_DISABLE_READ2_ON			(1 << 9)
+#define SEC_DISABLE_WRITE3_ON			(1 << 10)
+#define SEC_DISABLE_READ3_ON			(1 << 11)
+#define SEC_DISABLE_AMAP_WRITE_ON		(1 << 20)
+
+/* APBDEV_PMC_PWRGATE_TOGGLE_0 0x30 */
+#define PWRGATE_TOGGLE_PARTID_CRAIL		0
+#define PWRGATE_TOGGLE_PARTID_TD		1
+#define PWRGATE_TOGGLE_PARTID_VE		2
+#define PWRGATE_TOGGLE_PARTID_PCX		3
+#define PWRGATE_TOGGLE_PARTID_VDE		4
+#define PWRGATE_TOGGLE_PARTID_L2C		5
+#define PWRGATE_TOGGLE_PARTID_MPE		6
+#define PWRGATE_TOGGLE_PARTID_HEG		7
+#define PWRGATE_TOGGLE_PARTID_SAX		8
+#define PWRGATE_TOGGLE_PARTID_CE1		9
+#define PWRGATE_TOGGLE_PARTID_CE2		10
+#define PWRGATE_TOGGLE_PARTID_CE3		11
+#define PWRGATE_TOGGLE_PARTID_CELP		12
+#define PWRGATE_TOGGLE_PARTID_CE0		14
+#define PWRGATE_TOGGLE_PARTID_C0NC		15
+#define PWRGATE_TOGGLE_PARTID_C1NC		16
+#define PWRGATE_TOGGLE_PARTID_SOR		17
+#define PWRGATE_TOGGLE_PARTID_DIS		18
+#define PWRGATE_TOGGLE_PARTID_DISB		19
+#define PWRGATE_TOGGLE_PARTID_XUSBA		20
+#define PWRGATE_TOGGLE_PARTID_XUSBB		21
+#define PWRGATE_TOGGLE_PARTID_XUSBC		22
+#define PWRGATE_TOGGLE_PARTID_VIC		23
+#define PWRGATE_TOGGLE_PARTID_IRAM		24
+#define PWRGATE_TOGGLE_START			(1 << 8)
+
+/* APBDEV_PMC_PWRGATE_STATUS_0 0x38 */
+#define PWRGATE_STATUS_CRAIL_ENABLE		(1 << 0)
+#define PWRGATE_STATUS_TD_ENABLE		(1 << 1)
+#define PWRGATE_STATUS_VE_ENABLE		(1 << 2)
+#define PWRGATE_STATUS_PCX_ENABLE		(1 << 3)
+#define PWRGATE_STATUS_VDE_ENABLE		(1 << 4)
+#define PWRGATE_STATUS_L2C_ENABLE		(1 << 5)
+#define PWRGATE_STATUS_MPE_ENABLE		(1 << 6)
+#define PWRGATE_STATUS_HEG_ENABLE		(1 << 7)
+#define PWRGATE_STATUS_SAX_ENABLE		(1 << 8)
+#define PWRGATE_STATUS_CE1_ENABLE		(1 << 9)
+#define PWRGATE_STATUS_CE2_ENABLE		(1 << 10)
+#define PWRGATE_STATUS_CE3_ENABLE		(1 << 11)
+#define PWRGATE_STATUS_CELP_ENABLE		(1 << 12)
+#define PWRGATE_STATUS_CE0_ENABLE		(1 << 14)
+#define PWRGATE_STATUS_C0NC_ENABLE		(1 << 15)
+#define PWRGATE_STATUS_C1NC_ENABLE		(1 << 16)
+#define PWRGATE_STATUS_SOR_ENABLE		(1 << 17)
+#define PWRGATE_STATUS_DIS_ENABLE		(1 << 18)
+#define PWRGATE_STATUS_DISB_ENABLE		(1 << 19)
+#define PWRGATE_STATUS_XUSBA_ENABLE		(1 << 20)
+#define PWRGATE_STATUS_XUSBB_ENABLE		(1 << 21)
+#define PWRGATE_STATUS_XUSBC_ENABLE		(1 << 22)
+#define PWRGATE_STATUS_VIC_ENABLE		(1 << 23)
+#define PWRGATE_STATUS_IRAM_ENABLE		(1 << 24)
+
+/* APBDEV_PMC_CNTRL2_0 0x440 */
+#define HOLD_CKE_LOW_EN				(1 << 12)
+
+/* PMC read/write functions */
+u32 tegra_pmc_readl(unsigned long offset);
+void tegra_pmc_writel(u32 value, unsigned long offset);
+
+#define PMC_CNTRL		0x0
+#define  PMC_CNTRL_MAIN_RST	BIT(4)
+
+#if IS_ENABLED(CONFIG_TEGRA186)
+#  define PMC_SCRATCH0 0x32000
+#else
+#  define PMC_SCRATCH0 0x00050
+#endif
+
+/* for secure PMC */
+#define TEGRA_SMC_PMC		0xc2fffe00
+#define  TEGRA_SMC_PMC_READ	0xaa
+#define  TEGRA_SMC_PMC_WRITE	0xbb
+
+#endif	/* PMC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/pmu.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/pmu.h
new file mode 100644
index 000000000..e850875d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/pmu.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA_PMU_H_
+#define _TEGRA_PMU_H_
+
+/* Set core and CPU voltages to nominal levels */
+int pmu_set_nominal(void);
+
+#endif	/* _TEGRA_PMU_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/powergate.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/powergate.h
new file mode 100644
index 000000000..2e491f190
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/powergate.h
@@ -0,0 +1,39 @@
+#ifndef _TEGRA_POWERGATE_H_
+#define _TEGRA_POWERGATE_H_
+
+#include <asm/arch/clock.h>
+
+enum tegra_powergate {
+	TEGRA_POWERGATE_CPU,
+	TEGRA_POWERGATE_3D,
+	TEGRA_POWERGATE_VENC,
+	TEGRA_POWERGATE_PCIE,
+	TEGRA_POWERGATE_VDEC,
+	TEGRA_POWERGATE_L2,
+	TEGRA_POWERGATE_MPE,
+	TEGRA_POWERGATE_HEG,
+	TEGRA_POWERGATE_SATA,
+	TEGRA_POWERGATE_CPU1,
+	TEGRA_POWERGATE_CPU2,
+	TEGRA_POWERGATE_CPU3,
+	TEGRA_POWERGATE_CELP,
+	TEGRA_POWERGATE_3D1,
+	TEGRA_POWERGATE_CPU0,
+	TEGRA_POWERGATE_C0NC,
+	TEGRA_POWERGATE_C1NC,
+	TEGRA_POWERGATE_SOR,
+	TEGRA_POWERGATE_DIS,
+	TEGRA_POWERGATE_DISB,
+	TEGRA_POWERGATE_XUSBA,
+	TEGRA_POWERGATE_XUSBB,
+	TEGRA_POWERGATE_XUSBC,
+	TEGRA_POWERGATE_VIC,
+	TEGRA_POWERGATE_IRAM,
+};
+
+int tegra_powergate_sequence_power_up(enum tegra_powergate id,
+				      enum periph_id periph);
+int tegra_powergate_power_on(enum tegra_powergate id);
+int tegra_powergate_power_off(enum tegra_powergate id);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/pwm.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/pwm.h
new file mode 100644
index 000000000..eebd104de
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/pwm.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Tegra pulse width frequency modulator definitions
+ *
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+#ifndef __ASM_ARCH_TEGRA_PWM_H
+#define __ASM_ARCH_TEGRA_PWM_H
+
+/* This is a single PWM channel */
+struct pwm_ctlr {
+	uint control;		/* Control register */
+	uint reserved[3];	/* Space space */
+};
+
+#define PWM_NUM_CHANNELS	4
+
+/* PWM_CONTROLLER_PWM_CSR_0/1/2/3_0 */
+#define PWM_ENABLE_SHIFT	31
+#define PWM_ENABLE_MASK	(0x1 << PWM_ENABLE_SHIFT)
+
+#define PWM_WIDTH_SHIFT	16
+#define PWM_WIDTH_MASK		(0x7FFF << PWM_WIDTH_SHIFT)
+
+#define PWM_DIVIDER_SHIFT	0
+#define PWM_DIVIDER_MASK	(0x1FFF << PWM_DIVIDER_SHIFT)
+
+#endif	/* __ASM_ARCH_TEGRA_PWM_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/scu.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/scu.h
new file mode 100644
index 000000000..afe076419
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/scu.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _SCU_H_
+#define _SCU_H_
+
+/* ARM Snoop Control Unit (SCU) registers */
+struct scu_ctlr {
+	uint scu_ctrl;		/* SCU Control Register, offset 00 */
+	uint scu_cfg;		/* SCU Config Register, offset 04 */
+	uint scu_cpu_pwr_stat;	/* SCU CPU Power Status Register, offset 08 */
+	uint scu_inv_all;	/* SCU Invalidate All Register, offset 0C */
+	uint scu_reserved0[12];	/* reserved, offset 10-3C */
+	uint scu_filt_start;	/* SCU Filtering Start Address Reg, offset 40 */
+	uint scu_filt_end;	/* SCU Filtering End Address Reg, offset 44 */
+	uint scu_reserved1[2];	/* reserved, offset 48-4C */
+	uint scu_acc_ctl;	/* SCU Access Control Register, offset 50 */
+	uint scu_ns_acc_ctl;	/* SCU Non-secure Access Cntrl Reg, offset 54 */
+};
+
+#define SCU_CTRL_ENABLE		(1 << 0)
+
+#endif	/* SCU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/sys_proto.h
new file mode 100644
index 000000000..62e1c7bcd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/sys_proto.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+void invalidate_dcache(void);
+
+/**
+ * tegra_board_id() - Get the board iD
+ *
+ * @return a board ID, or -ve on error
+ */
+int tegra_board_id(void);
+
+/**
+ * tegra_lcd_pmic_init() - Set up the PMIC for a board
+ *
+ * @board_id: Board ID which may be used to select LCD type
+ * @return 0 if OK, -ve on error
+ */
+int tegra_lcd_pmic_init(int board_id);
+
+/**
+ * nvidia_board_init() - perform any board-specific init
+ *
+ * @return 0 if OK, -ve on error
+ */
+int nvidia_board_init(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra.h
new file mode 100644
index 000000000..7a4e0972f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA_H_
+#define _TEGRA_H_
+
+#define NV_PA_ARM_PERIPHBASE	0x50040000
+#define NV_PA_PG_UP_BASE	0x60000000
+#define NV_PA_TMRUS_BASE	0x60005010
+#define NV_PA_CLK_RST_BASE	0x60006000
+#define NV_PA_FLOW_BASE		0x60007000
+#define NV_PA_GPIO_BASE		0x6000D000
+#define NV_PA_EVP_BASE		0x6000F000
+#define NV_PA_APB_MISC_BASE	0x70000000
+#define NV_PA_APB_MISC_GP_BASE	(NV_PA_APB_MISC_BASE + 0x0800)
+#define NV_PA_APB_UARTA_BASE	(NV_PA_APB_MISC_BASE + 0x6000)
+#define NV_PA_APB_UARTB_BASE	(NV_PA_APB_MISC_BASE + 0x6040)
+#define NV_PA_APB_UARTC_BASE	(NV_PA_APB_MISC_BASE + 0x6200)
+#define NV_PA_APB_UARTD_BASE	(NV_PA_APB_MISC_BASE + 0x6300)
+#define NV_PA_APB_UARTE_BASE	(NV_PA_APB_MISC_BASE + 0x6400)
+#define NV_PA_NAND_BASE		(NV_PA_APB_MISC_BASE + 0x8000)
+#define NV_PA_SPI_BASE		(NV_PA_APB_MISC_BASE + 0xC380)
+#define NV_PA_SLINK1_BASE	(NV_PA_APB_MISC_BASE + 0xD400)
+#define NV_PA_SLINK2_BASE	(NV_PA_APB_MISC_BASE + 0xD600)
+#define NV_PA_SLINK3_BASE	(NV_PA_APB_MISC_BASE + 0xD800)
+#define NV_PA_SLINK4_BASE	(NV_PA_APB_MISC_BASE + 0xDA00)
+#define NV_PA_SLINK5_BASE	(NV_PA_APB_MISC_BASE + 0xDC00)
+#define NV_PA_SLINK6_BASE	(NV_PA_APB_MISC_BASE + 0xDE00)
+#define TEGRA_DVC_BASE		(NV_PA_APB_MISC_BASE + 0xD000)
+#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) || \
+	defined(CONFIG_TEGRA114) || defined(CONFIG_TEGRA124) || \
+	defined(CONFIG_TEGRA132) || defined(CONFIG_TEGRA210)
+#define NV_PA_PMC_BASE		(NV_PA_APB_MISC_BASE + 0xE400)
+#else
+#define NV_PA_PMC_BASE		0xc360000
+#endif
+#define NV_PA_EMC_BASE		(NV_PA_APB_MISC_BASE + 0xF400)
+#define NV_PA_FUSE_BASE		(NV_PA_APB_MISC_BASE + 0xF800)
+#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) || \
+	defined(CONFIG_TEGRA114)
+#define NV_PA_CSITE_BASE	0x70040000
+#else
+#define NV_PA_CSITE_BASE	0x70800000
+#endif
+#define TEGRA_USB_ADDR_MASK	0xFFFFC000
+
+#define NV_PA_SDRC_CS0		NV_PA_SDRAM_BASE
+#define LOW_LEVEL_SRAM_STACK	0x4000FFFC
+#define EARLY_AVP_STACK		(NV_PA_SDRAM_BASE + 0x20000)
+#define EARLY_CPU_STACK		(EARLY_AVP_STACK - 4096)
+#define PG_UP_TAG_AVP		0xAAAAAAAA
+
+#ifndef __ASSEMBLY__
+struct timerus {
+	unsigned int cntr_1us;
+};
+
+/* Address at which WB code runs, it must not overlap Bootrom's IRAM usage */
+#define NV_WB_RUN_ADDRESS	0x40020000
+
+#define NVBOOTTYPE_RECOVERY	2	/* BR entered RCM */
+#define NVBOOTINFOTABLE_BOOTTYPE 0xC	/* Boot type in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTSIZE	0x38	/* BCT size in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTPTR	0x3C	/* BCT pointer in BIT in IRAM */
+
+/* These are the available SKUs (product types) for Tegra */
+enum {
+	SKU_ID_T20_7		= 0x7,
+	SKU_ID_T20		= 0x8,
+	SKU_ID_T25SE		= 0x14,
+	SKU_ID_AP25		= 0x17,
+	SKU_ID_T25		= 0x18,
+	SKU_ID_AP25E		= 0x1b,
+	SKU_ID_T25E		= 0x1c,
+	SKU_ID_T33		= 0x80,
+	SKU_ID_T30		= 0x81, /* Cardhu value */
+	SKU_ID_TM30MQS_P_A3	= 0xb1,
+	SKU_ID_T114_ENG		= 0x00, /* Dalmore value, unfused */
+	SKU_ID_T114_1		= 0x01,
+	SKU_ID_T124_ENG		= 0x00, /* Venice2 value, unfused */
+	SKU_ID_T210_ENG		= 0x00, /* unfused value TBD */
+};
+
+/*
+ * These are used to distinguish SOC types for setting up clocks. Mostly
+ * we can tell the clocking required by looking at the SOC sku_id, but
+ * for T30 it is a user option as to whether to run PLLP in fast or slow
+ * mode, so we have two options there.
+ */
+enum {
+	TEGRA_SOC_T20,
+	TEGRA_SOC_T25,
+	TEGRA_SOC_T30,
+	TEGRA_SOC_T114,
+	TEGRA_SOC_T124,
+	TEGRA_SOC_T210,
+
+	TEGRA_SOC_CNT,
+	TEGRA_SOC_UNKNOWN	= -1,
+};
+
+/* Tegra system controller (SYSCON) devices */
+enum {
+	TEGRA_SYSCON_PMC,
+};
+
+#else  /* __ASSEMBLY__ */
+#define PRM_RSTCTRL		NV_PA_PMC_BASE
+#endif
+
+#endif	/* TEGRA_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_ahub.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_ahub.h
new file mode 100644
index 000000000..96d542a91
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_ahub.h
@@ -0,0 +1,475 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * tegra_ahub.h - Definitions for Tegra124 audio hub driver
+ * Taken from dc tegra_ahub.h
+ *
+ * Copyright 2018 Google LLC
+ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA_AHUB_H_
+#define _TEGRA_AHUB_H_
+
+/*
+ * Each TX CIF transmits data into the XBAR. Each RX CIF can receive audio
+ * transmitted by a particular TX CIF.
+ */
+struct xbar_regs {
+	u32 apbif_rx0;		/* AUDIO_APBIF_RX0, offset 0x00 */
+	u32 apbif_rx1;		/* AUDIO_APBIF_RX1, offset 0x04 */
+	u32 apbif_rx2;		/* AUDIO_APBIF_RX2, offset 0x08 */
+	u32 apbif_rx3;		/* AUDIO_APBIF_RX3, offset 0x0C */
+
+	u32 i2s0_rx0;		/* AUDIO_I2S0_RX0,  offset 0x10 */
+	u32 i2s1_rx0;		/* AUDIO_I2S1_RX0,  offset 0x14 */
+	u32 i2s2_rx0;		/* AUDIO_I2S2_RX0,  offset 0x18 */
+	u32 i2s3_rx0;		/* AUDIO_I2S3_RX0,  offset 0x1C */
+	u32 i2s4_rx0;		/* AUDIO_I2S4_RX0,  offset 0x20 */
+
+	u32 dam0_rx0;		/* AUDIO_DAM0_RX0,  offset 0x24 */
+	u32 dam0_rx1;		/* AUDIO_DAM0_RX1,  offset 0x28 */
+	u32 dam1_rx0;		/* AUDIO_DAM1_RX0,  offset 0x2C */
+	u32 dam1_rx1;		/* AUDIO_DAM1_RX1,  offset 0x30 */
+	u32 dam2_rx0;		/* AUDIO_DAM2_RX0,  offset 0x34 */
+	u32 dam2_rx1;		/* AUDIO_DAM2_RX1,  offset 0x38 */
+
+	u32 spdif_rx0;		/* AUDIO_SPDIF_RX0, offset 0x3C */
+	u32 spdif_rx1;		/* AUDIO_SPDIF_RX1, offset 0x40 */
+
+	u32 apbif_rx4;		/* AUDIO_APBIF_RX4, offset 0x44 */
+	u32 apbif_rx5;		/* AUDIO_APBIF_RX4, offset 0x48 */
+	u32 apbif_rx6;		/* AUDIO_APBIF_RX4, offset 0x4C */
+	u32 apbif_rx7;		/* AUDIO_APBIF_RX4, offset 0x50 */
+	u32 apbif_rx8;		/* AUDIO_APBIF_RX4, offset 0x54 */
+	u32 apbif_rx9;		/* AUDIO_APBIF_RX4, offset 0x58 */
+
+	u32 amx0_rx0;		/* AUDIO_AMX0_RX0,  offset 0x5C */
+	u32 amx0_rx1;		/* AUDIO_AMX0_RX1,  offset 0x60 */
+	u32 amx0_rx2;		/* AUDIO_AMX0_RX2,  offset 0x64 */
+	u32 amx0_rx3;		/* AUDIO_AMX0_RX3,  offset 0x68 */
+
+	u32 adx0_rx0;		/* AUDIO_ADX0_RX0,  offset 0x6C */
+};
+
+struct apbif_regs {
+	u32 channel0_ctrl;		/* APBIF_CHANNEL0_CTRL */
+	u32 channel0_clr;		/* APBIF_CHANNEL0_CLEAR */
+	u32 channel0_stat;		/* APBIF_CHANNEL0_STATUS */
+	u32 channel0_txfifo;		/* APBIF_CHANNEL0_TXFIFO */
+	u32 channel0_rxfifo;		/* APBIF_CHANNEL0_RXFIFO */
+	u32 channel0_cif_tx0_ctrl;	/* APBIF_AUDIOCIF_TX0_CTRL */
+	u32 channel0_cif_rx0_ctrl;	/* APBIF_AUDIOCIF_RX0_CTRL */
+	u32 channel0_reserved0;		/* RESERVED, offset 0x1C */
+	/* ahub_channel1_ctrl/clr/stat/txfifo/rxfifl/ciftx/cifrx ... here */
+	/* ahub_channel2_ctrl/clr/stat/txfifo/rxfifl/ciftx/cifrx ... here */
+	/* ahub_channel3_ctrl/clr/stat/txfifo/rxfifl/ciftx/cifrx ... here */
+	u32 reserved123[3 * 8];
+	u32 config_link_ctrl;		/* APBIF_CONFIG_LINK_CTRL_0, off 0x80 */
+	u32 misc_ctrl;			/* APBIF_MISC_CTRL_0, offset 0x84 */
+	u32 apbdma_live_stat;		/* APBIF_APBDMA_LIVE_STATUS_0 */
+	u32 i2s_live_stat;		/* APBIF_I2S_LIVE_STATUS_0 */
+	u32 dam0_live_stat;		/* APBIF_DAM0_LIVE_STATUS_0 */
+	u32 dam1_live_stat;		/* APBIF_DAM0_LIVE_STATUS_0 */
+	u32 dam2_live_stat;		/* APBIF_DAM0_LIVE_STATUS_0 */
+	u32 spdif_live_stat;		/* APBIF_SPDIF_LIVE_STATUS_0 */
+	u32 i2s_int_mask;		/* APBIF_I2S_INT_MASK_0, offset B0 */
+	u32 dam_int_mask;		/* APBIF_DAM_INT_MASK_0 */
+	u32 reserved_int_mask;		/* RESERVED, offset 0xB8 */
+	u32 spdif_int_mask;		/* APBIF_SPDIF_INT_MASK_0 */
+	u32 apbif_int_mask;		/* APBIF_APBIF_INT_MASK_0, off C0 */
+	u32 reserved2_int_mask;		/* RESERVED, offset 0xC4 */
+	u32 i2s_int_stat;		/* APBIF_I2S_INT_STATUS_0, offset C8 */
+	u32 dam_int_stat;		/* APBIF_DAM_INT_STATUS_0 */
+	u32 reserved_int_stat;		/* RESERVED, offset 0xD0 */
+	u32 spdif_int_stat;		/* APBIF_SPDIF_INT_STATUS_0 */
+	u32 apbif_int_stat;		/* APBIF_APBIF_INT_STATUS_0 */
+	u32 reserved2_int_stat;		/* RESERVED, offset 0xDC */
+	u32 i2s_int_src;		/* APBIF_I2S_INT_SOURCE_0, offset E0 */
+	u32 dam_int_src;		/* APBIF_DAM_INT_SOURCE_0 */
+	u32 reserved_int_src;		/* RESERVED, offset 0xE8 */
+	u32 spdif_int_src;		/* APBIF_SPDIF_INT_SOURCE_0 */
+	u32 apbif_int_src;		/* APBIF_APBIF_INT_SOURCE_0, off F0 */
+	u32 reserved2_int_src;		/* RESERVED, offset 0xF4 */
+	u32 i2s_int_set;		/* APBIF_I2S_INT_SET_0, offset 0xF8 */
+	u32 dam_int_set;		/* APBIF_DAM_INT_SET_0, offset 0xFC */
+	u32 spdif_int_set;		/* APBIF_SPDIF_INT_SET_0, off 0x100 */
+	u32 apbif_int_set;		/* APBIF_APBIF_INT_SET_0, off 0x104 */
+};
+
+/*
+ * Tegra AHUB Registers Definition
+ */
+enum {
+	TEGRA_AUDIOCIF_CTRL_FIFO_THRESHOLD_SHIFT = 24,
+	TEGRA_AUDIOCIF_CTRL_FIFO_THRESHOLD_MASK_US = 0x3f,
+	TEGRA_AUDIOCIF_CTRL_FIFO_THRESHOLD_MASK =
+			TEGRA_AUDIOCIF_CTRL_FIFO_THRESHOLD_MASK_US <<
+			TEGRA_AUDIOCIF_CTRL_FIFO_THRESHOLD_SHIFT,
+
+	/* Channel count minus 1 */
+	TEGRA_AUDIOCIF_CTRL_AUDIO_CHANNELS_SHIFT = 20,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_CHANNELS_MASK_US = 0xf,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_CHANNELS_MASK =
+			TEGRA_AUDIOCIF_CTRL_AUDIO_CHANNELS_MASK_US <<
+			TEGRA_AUDIOCIF_CTRL_AUDIO_CHANNELS_SHIFT,
+
+	/* Channel count minus 1 */
+	TEGRA_AUDIOCIF_CTRL_CLIENT_CHANNELS_SHIFT = 16,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_CHANNELS_MASK_US = 0xf,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_CHANNELS_MASK =
+			TEGRA_AUDIOCIF_CTRL_CLIENT_CHANNELS_MASK_US <<
+			TEGRA_AUDIOCIF_CTRL_CLIENT_CHANNELS_SHIFT,
+
+	TEGRA_AUDIOCIF_BITS_4 = 0,
+	TEGRA_AUDIOCIF_BITS_8 = 1,
+	TEGRA_AUDIOCIF_BITS_12 = 2,
+	TEGRA_AUDIOCIF_BITS_16 = 3,
+	TEGRA_AUDIOCIF_BITS_20 = 4,
+	TEGRA_AUDIOCIF_BITS_24 = 5,
+	TEGRA_AUDIOCIF_BITS_28 = 6,
+	TEGRA_AUDIOCIF_BITS_32 = 7,
+
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT = 12,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_MASK =
+		7 << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_4 =
+		TEGRA_AUDIOCIF_BITS_4  << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_8 =
+		TEGRA_AUDIOCIF_BITS_8  << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_12 =
+		TEGRA_AUDIOCIF_BITS_12 << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_16 =
+		TEGRA_AUDIOCIF_BITS_16 << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_20 =
+		TEGRA_AUDIOCIF_BITS_20 << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_24 =
+		TEGRA_AUDIOCIF_BITS_24 << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_28 =
+		TEGRA_AUDIOCIF_BITS_28 << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_32 =
+		TEGRA_AUDIOCIF_BITS_32 << TEGRA_AUDIOCIF_CTRL_AUDIO_BITS_SHIFT,
+
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT = 8,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_MASK =
+		7 << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_4 =
+		TEGRA_AUDIOCIF_BITS_4  << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_8 =
+		TEGRA_AUDIOCIF_BITS_8  << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_12 =
+		TEGRA_AUDIOCIF_BITS_12 << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_16 =
+		TEGRA_AUDIOCIF_BITS_16 << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_20 =
+		TEGRA_AUDIOCIF_BITS_20 << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_24 =
+		TEGRA_AUDIOCIF_BITS_24 << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_28 =
+		TEGRA_AUDIOCIF_BITS_28 << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_32 =
+		TEGRA_AUDIOCIF_BITS_32 << TEGRA_AUDIOCIF_CTRL_CLIENT_BITS_SHIFT,
+
+	TEGRA_AUDIOCIF_EXPAND_ZERO = 0,
+	TEGRA_AUDIOCIF_EXPAND_ONE = 1,
+	TEGRA_AUDIOCIF_EXPAND_LFSR = 2,
+
+	TEGRA_AUDIOCIF_CTRL_EXPAND_SHIFT = 6,
+	TEGRA_AUDIOCIF_CTRL_EXPAND_MASK = 3 << TEGRA_AUDIOCIF_CTRL_EXPAND_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_EXPAND_ZERO =
+		TEGRA_AUDIOCIF_EXPAND_ZERO << TEGRA_AUDIOCIF_CTRL_EXPAND_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_EXPAND_ONE =
+		TEGRA_AUDIOCIF_EXPAND_ONE  << TEGRA_AUDIOCIF_CTRL_EXPAND_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_EXPAND_LFSR =
+		TEGRA_AUDIOCIF_EXPAND_LFSR << TEGRA_AUDIOCIF_CTRL_EXPAND_SHIFT,
+
+	TEGRA_AUDIOCIF_STEREO_CONV_CH0 = 0,
+	TEGRA_AUDIOCIF_STEREO_CONV_CH1 = 1,
+	TEGRA_AUDIOCIF_STEREO_CONV_AVG = 2,
+
+	TEGRA_AUDIOCIF_CTRL_STEREO_CONV_SHIFT = 4,
+	TEGRA_AUDIOCIF_CTRL_STEREO_CONV_MASK =
+			3 << TEGRA_AUDIOCIF_CTRL_STEREO_CONV_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_STEREO_CONV_CH0 =
+			TEGRA_AUDIOCIF_STEREO_CONV_CH0 <<
+			TEGRA_AUDIOCIF_CTRL_STEREO_CONV_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_STEREO_CONV_CH1 =
+			TEGRA_AUDIOCIF_STEREO_CONV_CH1 <<
+			TEGRA_AUDIOCIF_CTRL_STEREO_CONV_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_STEREO_CONV_AVG =
+			TEGRA_AUDIOCIF_STEREO_CONV_AVG <<
+			TEGRA_AUDIOCIF_CTRL_STEREO_CONV_SHIFT,
+
+	TEGRA_AUDIOCIF_CTRL_REPLICATE = 3,
+
+	TEGRA_AUDIOCIF_DIRECTION_TX = 0,
+	TEGRA_AUDIOCIF_DIRECTION_RX = 1,
+
+	TEGRA_AUDIOCIF_CTRL_DIRECTION_SHIFT = 2,
+	TEGRA_AUDIOCIF_CTRL_DIRECTION_MASK =
+			1 << TEGRA_AUDIOCIF_CTRL_DIRECTION_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_DIRECTION_TX =
+			TEGRA_AUDIOCIF_DIRECTION_TX <<
+			TEGRA_AUDIOCIF_CTRL_DIRECTION_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_DIRECTION_RX =
+			TEGRA_AUDIOCIF_DIRECTION_RX <<
+			TEGRA_AUDIOCIF_CTRL_DIRECTION_SHIFT,
+
+	TEGRA_AUDIOCIF_TRUNCATE_ROUND = 0,
+	TEGRA_AUDIOCIF_TRUNCATE_CHOP = 1,
+
+	TEGRA_AUDIOCIF_CTRL_TRUNCATE_SHIFT = 1,
+	TEGRA_AUDIOCIF_CTRL_TRUNCATE_MASK =
+			1 << TEGRA_AUDIOCIF_CTRL_TRUNCATE_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_TRUNCATE_ROUND =
+			TEGRA_AUDIOCIF_TRUNCATE_ROUND <<
+			TEGRA_AUDIOCIF_CTRL_TRUNCATE_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_TRUNCATE_CHOP =
+			TEGRA_AUDIOCIF_TRUNCATE_CHOP  <<
+			TEGRA_AUDIOCIF_CTRL_TRUNCATE_SHIFT,
+
+	TEGRA_AUDIOCIF_MONO_CONV_ZERO = 0,
+	TEGRA_AUDIOCIF_MONO_CONV_COPY = 1,
+
+	TEGRA_AUDIOCIF_CTRL_MONO_CONV_SHIFT = 0,
+	TEGRA_AUDIOCIF_CTRL_MONO_CONV_MASK =
+			1 << TEGRA_AUDIOCIF_CTRL_MONO_CONV_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_MONO_CONV_ZERO =
+			TEGRA_AUDIOCIF_MONO_CONV_ZERO <<
+			TEGRA_AUDIOCIF_CTRL_MONO_CONV_SHIFT,
+	TEGRA_AUDIOCIF_CTRL_MONO_CONV_COPY =
+			TEGRA_AUDIOCIF_MONO_CONV_COPY <<
+			TEGRA_AUDIOCIF_CTRL_MONO_CONV_SHIFT,
+
+	/* Registers within TEGRA_AUDIO_CLUSTER_BASE */
+
+	TEGRA_AHUB_CHANNEL_CTRL = 0x0,
+	TEGRA_AHUB_CHANNEL_CTRL_STRIDE = 0x20,
+	TEGRA_AHUB_CHANNEL_CTRL_COUNT = 4,
+	TEGRA_AHUB_CHANNEL_CTRL_TX_EN = 1 << 31,
+	TEGRA_AHUB_CHANNEL_CTRL_RX_EN = 1 << 30,
+	TEGRA_AHUB_CHANNEL_CTRL_LOOPBACK = 1 << 29,
+
+	TEGRA_AHUB_CHANNEL_CTRL_TX_THRESHOLD_SHIFT = 16,
+	TEGRA_AHUB_CHANNEL_CTRL_TX_THRESHOLD_MASK_US = 0xff,
+	TEGRA_AHUB_CHANNEL_CTRL_TX_THRESHOLD_MASK =
+			TEGRA_AHUB_CHANNEL_CTRL_TX_THRESHOLD_MASK_US <<
+			TEGRA_AHUB_CHANNEL_CTRL_TX_THRESHOLD_SHIFT,
+
+	TEGRA_AHUB_CHANNEL_CTRL_RX_THRESHOLD_SHIFT = 8,
+	TEGRA_AHUB_CHANNEL_CTRL_RX_THRESHOLD_MASK_US = 0xff,
+	TEGRA_AHUB_CHANNEL_CTRL_RX_THRESHOLD_MASK =
+			TEGRA_AHUB_CHANNEL_CTRL_RX_THRESHOLD_MASK_US <<
+			TEGRA_AHUB_CHANNEL_CTRL_RX_THRESHOLD_SHIFT,
+
+	TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_EN = 1 << 6,
+
+	TEGRA_PACK_8_4 = 2,
+	TEGRA_PACK_16 = 3,
+
+	TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_SHIFT = 4,
+	TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_MASK_US = 3,
+	TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_MASK =
+		TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_MASK_US <<
+		TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_SHIFT,
+	TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_8_4 =
+		TEGRA_PACK_8_4 << TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_SHIFT,
+	TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_16 =
+		TEGRA_PACK_16 << TEGRA_AHUB_CHANNEL_CTRL_TX_PACK_SHIFT,
+
+	TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_EN = 1 << 2,
+
+	TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_SHIFT = 0,
+	TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_MASK_US = 3,
+	TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_MASK =
+		TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_MASK_US <<
+		TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_SHIFT,
+	TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_8_4 =
+		TEGRA_PACK_8_4 << TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_SHIFT,
+	TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_16 =
+		TEGRA_PACK_16 << TEGRA_AHUB_CHANNEL_CTRL_RX_PACK_SHIFT,
+
+	/* TEGRA_AHUB_CHANNEL_CLEAR */
+
+	TEGRA_AHUB_CHANNEL_CLEAR = 0x4,
+	TEGRA_AHUB_CHANNEL_CLEAR_STRIDE = 0x20,
+	TEGRA_AHUB_CHANNEL_CLEAR_COUNT = 4,
+	TEGRA_AHUB_CHANNEL_CLEAR_TX_SOFT_RESET = 1 << 31,
+	TEGRA_AHUB_CHANNEL_CLEAR_RX_SOFT_RESET = 1 << 30,
+
+	TEGRA_AHUB_CHANNEL_STATUS = 0x8,
+	TEGRA_AHUB_CHANNEL_STATUS_STRIDE = 0x20,
+	TEGRA_AHUB_CHANNEL_STATUS_COUNT = 4,
+	TEGRA_AHUB_CHANNEL_STATUS_TX_FREE_SHIFT = 24,
+	TEGRA_AHUB_CHANNEL_STATUS_TX_FREE_MASK_US = 0xff,
+	TEGRA_AHUB_CHANNEL_STATUS_TX_FREE_MASK =
+			TEGRA_AHUB_CHANNEL_STATUS_TX_FREE_MASK_US <<
+			TEGRA_AHUB_CHANNEL_STATUS_TX_FREE_SHIFT,
+	TEGRA_AHUB_CHANNEL_STATUS_RX_FREE_SHIFT = 16,
+	TEGRA_AHUB_CHANNEL_STATUS_RX_FREE_MASK_US = 0xff,
+	TEGRA_AHUB_CHANNEL_STATUS_RX_FREE_MASK =
+			TEGRA_AHUB_CHANNEL_STATUS_RX_FREE_MASK_US <<
+			TEGRA_AHUB_CHANNEL_STATUS_RX_FREE_SHIFT,
+	TEGRA_AHUB_CHANNEL_STATUS_TX_TRIG = 1 << 1,
+	TEGRA_AHUB_CHANNEL_STATUS_RX_TRIG = 1 << 0,
+
+	TEGRA_AHUB_CHANNEL_TXFIFO = 0xc,
+	TEGRA_AHUB_CHANNEL_TXFIFO_STRIDE = 0x20,
+	TEGRA_AHUB_CHANNEL_TXFIFO_COUNT = 4,
+
+	TEGRA_AHUB_CHANNEL_RXFIFO = 0x10,
+	TEGRA_AHUB_CHANNEL_RXFIFO_STRIDE = 0x20,
+	TEGRA_AHUB_CHANNEL_RXFIFO_COUNT = 4,
+
+	TEGRA_AHUB_CIF_TX_CTRL = 0x14,
+	TEGRA_AHUB_CIF_TX_CTRL_STRIDE = 0x20,
+	TEGRA_AHUB_CIF_TX_CTRL_COUNT = 4,
+	/* Uses field from TEGRA_AUDIOCIF_CTRL_* */
+
+	TEGRA_AHUB_CIF_RX_CTRL = 0x18,
+	TEGRA_AHUB_CIF_RX_CTRL_STRIDE = 0x20,
+	TEGRA_AHUB_CIF_RX_CTRL_COUNT = 4,
+	/* Uses field from TEGRA_AUDIOCIF_CTRL_* */
+
+	TEGRA_AHUB_CONFIG_LINK_CTRL = 0x80,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_MASTER_FIFO_FULL_CNT_SHIFT = 28,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_MASTER_FIFO_FULL_CNT_MASK_US = 0xf,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_MASTER_FIFO_FULL_CNT_MASK =
+		TEGRA_AHUB_CONFIG_LINK_CTRL_MASTER_FIFO_FULL_CNT_MASK_US <<
+		TEGRA_AHUB_CONFIG_LINK_CTRL_MASTER_FIFO_FULL_CNT_SHIFT,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_TIMEOUT_CNT_SHIFT = 16,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_TIMEOUT_CNT_MASK_US = 0xfff,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_TIMEOUT_CNT_MASK =
+		TEGRA_AHUB_CONFIG_LINK_CTRL_TIMEOUT_CNT_MASK_US <<
+		TEGRA_AHUB_CONFIG_LINK_CTRL_TIMEOUT_CNT_SHIFT,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_IDLE_CNT_SHIFT = 4,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_IDLE_CNT_MASK_US = 0xfff,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_IDLE_CNT_MASK =
+		TEGRA_AHUB_CONFIG_LINK_CTRL_IDLE_CNT_MASK_US <<
+		TEGRA_AHUB_CONFIG_LINK_CTRL_IDLE_CNT_SHIFT,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_CG_EN = 1 << 2,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_CLEAR_TIMEOUT_CNTR = 1 << 1,
+	TEGRA_AHUB_CONFIG_LINK_CTRL_SOFT_RESET = 1 << 0,
+
+	TEGRA_AHUB_MISC_CTRL = 0x84,
+	TEGRA_AHUB_MISC_CTRL_AUDIO_ACTIVE = 1 << 31,
+	TEGRA_AHUB_MISC_CTRL_AUDIO_CG_EN = 1 << 8,
+	TEGRA_AHUB_MISC_CTRL_AUDIO_OBS_SEL_SHIFT = 0,
+	TEGRA_AHUB_MISC_CTRL_AUDIO_OBS_SEL_MASK =
+			0x1f << TEGRA_AHUB_MISC_CTRL_AUDIO_OBS_SEL_SHIFT,
+
+	TEGRA_AHUB_APBDMA_LIVE_STATUS = 0x88,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH3_RX_CIF_FIFO_FULL = 1 << 31,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH3_TX_CIF_FIFO_FULL = 1 << 30,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH2_RX_CIF_FIFO_FULL = 1 << 29,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH2_TX_CIF_FIFO_FULL = 1 << 28,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH1_RX_CIF_FIFO_FULL = 1 << 27,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH1_TX_CIF_FIFO_FULL = 1 << 26,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH0_RX_CIF_FIFO_FULL = 1 << 25,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH0_TX_CIF_FIFO_FULL = 1 << 24,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH3_RX_CIF_FIFO_EMPTY = 1 << 23,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH3_TX_CIF_FIFO_EMPTY = 1 << 22,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH2_RX_CIF_FIFO_EMPTY = 1 << 21,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH2_TX_CIF_FIFO_EMPTY = 1 << 20,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH1_RX_CIF_FIFO_EMPTY = 1 << 19,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH1_TX_CIF_FIFO_EMPTY = 1 << 18,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH0_RX_CIF_FIFO_EMPTY = 1 << 17,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH0_TX_CIF_FIFO_EMPTY = 1 << 16,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH3_RX_DMA_FIFO_FULL = 1 << 15,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH3_TX_DMA_FIFO_FULL = 1 << 14,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH2_RX_DMA_FIFO_FULL = 1 << 13,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH2_TX_DMA_FIFO_FULL = 1 << 12,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH1_RX_DMA_FIFO_FULL = 1 << 11,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH1_TX_DMA_FIFO_FULL = 1 << 10,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH0_RX_DMA_FIFO_FULL = 1 << 9,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH0_TX_DMA_FIFO_FULL = 1 << 8,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH3_RX_DMA_FIFO_EMPTY = 1 << 7,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH3_TX_DMA_FIFO_EMPTY = 1 << 6,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH2_RX_DMA_FIFO_EMPTY = 1 << 5,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH2_TX_DMA_FIFO_EMPTY = 1 << 4,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH1_RX_DMA_FIFO_EMPTY = 1 << 3,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH1_TX_DMA_FIFO_EMPTY = 1 << 2,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH0_RX_DMA_FIFO_EMPTY = 1 << 1,
+	TEGRA_AHUB_APBDMA_LIVE_STATUS_CH0_TX_DMA_FIFO_EMPTY = 1 << 0,
+
+	TEGRA_AHUB_I2S_LIVE_STATUS = 0x8c,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S4_RX_FIFO_FULL = 1 << 29,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S4_TX_FIFO_FULL = 1 << 28,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S3_RX_FIFO_FULL = 1 << 27,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S3_TX_FIFO_FULL = 1 << 26,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S2_RX_FIFO_FULL = 1 << 25,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S2_TX_FIFO_FULL = 1 << 24,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S1_RX_FIFO_FULL = 1 << 23,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S1_TX_FIFO_FULL = 1 << 22,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S0_RX_FIFO_FULL = 1 << 21,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S0_TX_FIFO_FULL = 1 << 20,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S4_RX_FIFO_ENABLED = 1 << 19,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S4_TX_FIFO_ENABLED = 1 << 18,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S3_RX_FIFO_ENABLED = 1 << 17,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S3_TX_FIFO_ENABLED = 1 << 16,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S2_RX_FIFO_ENABLED = 1 << 15,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S2_TX_FIFO_ENABLED = 1 << 14,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S1_RX_FIFO_ENABLED = 1 << 13,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S1_TX_FIFO_ENABLED = 1 << 12,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S0_RX_FIFO_ENABLED = 1 << 11,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S0_TX_FIFO_ENABLED = 1 << 10,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S4_RX_FIFO_EMPTY = 1 << 9,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S4_TX_FIFO_EMPTY = 1 << 8,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S3_RX_FIFO_EMPTY = 1 << 7,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S3_TX_FIFO_EMPTY = 1 << 6,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S2_RX_FIFO_EMPTY = 1 << 5,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S2_TX_FIFO_EMPTY = 1 << 4,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S1_RX_FIFO_EMPTY = 1 << 3,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S1_TX_FIFO_EMPTY = 1 << 2,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S0_RX_FIFO_EMPTY = 1 << 1,
+	TEGRA_AHUB_I2S_LIVE_STATUS_I2S0_TX_FIFO_EMPTY = 1 << 0,
+
+	TEGRA_AHUB_DAM_LIVE_STATUS = 0x90,
+	TEGRA_AHUB_DAM_LIVE_STATUS_STRIDE = 0x8,
+	TEGRA_AHUB_DAM_LIVE_STATUS_COUNT = 3,
+	TEGRA_AHUB_DAM_LIVE_STATUS_TX_ENABLED = 1 << 26,
+	TEGRA_AHUB_DAM_LIVE_STATUS_RX1_ENABLED = 1 << 25,
+	TEGRA_AHUB_DAM_LIVE_STATUS_RX0_ENABLED = 1 << 24,
+	TEGRA_AHUB_DAM_LIVE_STATUS_TXFIFO_FULL = 1 << 15,
+	TEGRA_AHUB_DAM_LIVE_STATUS_RX1FIFO_FULL = 1 << 9,
+	TEGRA_AHUB_DAM_LIVE_STATUS_RX0FIFO_FULL = 1 << 8,
+	TEGRA_AHUB_DAM_LIVE_STATUS_TXFIFO_EMPTY = 1 << 7,
+	TEGRA_AHUB_DAM_LIVE_STATUS_RX1FIFO_EMPTY = 1 << 1,
+	TEGRA_AHUB_DAM_LIVE_STATUS_RX0FIFO_EMPTY = 1 << 0,
+
+	TEGRA_AHUB_SPDIF_LIVE_STATUS = 0xa8,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_USER_TX_ENABLED = 1 << 11,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_USER_RX_ENABLED = 1 << 10,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_DATA_TX_ENABLED = 1 << 9,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_DATA_RX_ENABLED = 1 << 8,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_USER_TXFIFO_FULL = 1 << 7,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_USER_RXFIFO_FULL = 1 << 6,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_DATA_TXFIFO_FULL = 1 << 5,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_DATA_RXFIFO_FULL = 1 << 4,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_USER_TXFIFO_EMPTY = 1 << 3,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_USER_RXFIFO_EMPTY = 1 << 2,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_DATA_TXFIFO_EMPTY = 1 << 1,
+	TEGRA_AHUB_SPDIF_LIVE_STATUS_DATA_RXFIFO_EMPTY = 1 << 0,
+
+	TEGRA_AHUB_I2S_INT_MASK = 0xb0,
+	TEGRA_AHUB_DAM_INT_MASK = 0xb4,
+	TEGRA_AHUB_SPDIF_INT_MASK = 0xbc,
+	TEGRA_AHUB_APBIF_INT_MASK = 0xc0,
+	TEGRA_AHUB_I2S_INT_STATUS = 0xc8,
+	TEGRA_AHUB_DAM_INT_STATUS = 0xcc,
+	TEGRA_AHUB_SPDIF_INT_STATUS = 0xd4,
+	TEGRA_AHUB_APBIF_INT_STATUS = 0xd8,
+	TEGRA_AHUB_I2S_INT_SOURCE = 0xe0,
+	TEGRA_AHUB_DAM_INT_SOURCE = 0xe4,
+	TEGRA_AHUB_SPDIF_INT_SOURCE = 0xec,
+	TEGRA_AHUB_APBIF_INT_SOURCE = 0xf0,
+	TEGRA_AHUB_I2S_INT_SET = 0xf8,
+	TEGRA_AHUB_DAM_INT_SET = 0xfc,
+	TEGRA_AHUB_SPDIF_INT_SET = 0x100,
+	TEGRA_AHUB_APBIF_INT_SET = 0x104,
+
+	TEGRA_AHUB_AUDIO_RX = 0x0,
+	TEGRA_AHUB_AUDIO_RX_STRIDE = 0x4,
+	TEGRA_AHUB_AUDIO_RX_COUNT = 17,
+};
+
+#endif	/* _TEGRA_I2C_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h
new file mode 100644
index 000000000..e57b9ef9c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * NVIDIA Tegra I2C controller
+ *
+ * Copyright 2010-2011 NVIDIA Corporation
+ */
+
+#ifndef _TEGRA_I2C_H_
+#define _TEGRA_I2C_H_
+
+#include <asm/types.h>
+
+struct udevice;
+
+enum {
+	I2C_TIMEOUT_USEC = 10000,	/* Wait time for completion */
+	I2C_FIFO_DEPTH = 8,		/* I2C fifo depth */
+};
+
+enum i2c_transaction_flags {
+	I2C_IS_WRITE = 0x1,		/* for I2C write operation */
+	I2C_IS_10_BIT_ADDRESS = 0x2,	/* for 10-bit I2C slave address */
+	I2C_USE_REPEATED_START = 0x4,	/* for repeat start */
+	I2C_NO_ACK = 0x8,		/* for slave that won't generate ACK */
+	I2C_SOFTWARE_CONTROLLER	= 0x10,	/* for I2C transfer using GPIO */
+	I2C_NO_STOP = 0x20,
+};
+
+/* Contians the I2C transaction details */
+struct i2c_trans_info {
+	/* flags to indicate the transaction details */
+	enum i2c_transaction_flags flags;
+	u32 address;	/* I2C slave device address */
+	u32 num_bytes;	/* number of bytes to be transferred */
+	/*
+	 * Send/receive buffer. For the I2C send operation this buffer should
+	 * be filled with the data to be sent to the slave device. For the I2C
+	 * receive operation this buffer is filled with the data received from
+	 * the slave device.
+	 */
+	u8 *buf;
+	int is_10bit_address;
+};
+
+struct i2c_control {
+	u32 tx_fifo;
+	u32 rx_fifo;
+	u32 packet_status;
+	u32 fifo_control;
+	u32 fifo_status;
+	u32 int_mask;
+	u32 int_status;
+};
+
+struct dvc_ctlr {
+	u32 ctrl1;			/* 00: DVC_CTRL_REG1 */
+	u32 ctrl2;			/* 04: DVC_CTRL_REG2 */
+	u32 ctrl3;			/* 08: DVC_CTRL_REG3 */
+	u32 status;			/* 0C: DVC_STATUS_REG */
+	u32 ctrl;			/* 10: DVC_I2C_CTRL_REG */
+	u32 addr_data;			/* 14: DVC_I2C_ADDR_DATA_REG */
+	u32 reserved_0[2];		/* 18: */
+	u32 req;			/* 20: DVC_REQ_REGISTER */
+	u32 addr_data3;			/* 24: DVC_I2C_ADDR_DATA_REG_3 */
+	u32 reserved_1[6];		/* 28: */
+	u32 cnfg;			/* 40: DVC_I2C_CNFG */
+	u32 cmd_addr0;			/* 44: DVC_I2C_CMD_ADDR0 */
+	u32 cmd_addr1;			/* 48: DVC_I2C_CMD_ADDR1 */
+	u32 cmd_data1;			/* 4C: DVC_I2C_CMD_DATA1 */
+	u32 cmd_data2;			/* 50: DVC_I2C_CMD_DATA2 */
+	u32 reserved_2[2];		/* 54: */
+	u32 i2c_status;			/* 5C: DVC_I2C_STATUS */
+	struct i2c_control control;	/* 60 ~ 78 */
+};
+
+struct i2c_ctlr {
+	u32 cnfg;			/* 00: I2C_I2C_CNFG */
+	u32 cmd_addr0;			/* 04: I2C_I2C_CMD_ADDR0 */
+	u32 cmd_addr1;			/* 08: I2C_I2C_CMD_DATA1 */
+	u32 cmd_data1;			/* 0C: I2C_I2C_CMD_DATA2 */
+	u32 cmd_data2;			/* 10: DVC_I2C_CMD_DATA2 */
+	u32 reserved_0[2];		/* 14: */
+	u32 status;			/* 1C: I2C_I2C_STATUS */
+	u32 sl_cnfg;			/* 20: I2C_I2C_SL_CNFG */
+	u32 sl_rcvd;			/* 24: I2C_I2C_SL_RCVD */
+	u32 sl_status;			/* 28: I2C_I2C_SL_STATUS */
+	u32 sl_addr1;			/* 2C: I2C_I2C_SL_ADDR1 */
+	u32 sl_addr2;			/* 30: I2C_I2C_SL_ADDR2 */
+	u32 reserved_1[2];		/* 34: */
+	u32 sl_delay_count;		/* 3C: I2C_I2C_SL_DELAY_COUNT */
+	u32 reserved_2[4];		/* 40: */
+	struct i2c_control control;	/* 50 ~ 68 */
+	u32 clk_div;			/* 6C: I2C_I2C_CLOCK_DIVISOR */
+};
+
+/* bit fields definitions for IO Packet Header 1 format */
+#define PKT_HDR1_PROTOCOL_SHIFT		4
+#define PKT_HDR1_PROTOCOL_MASK		(0xf << PKT_HDR1_PROTOCOL_SHIFT)
+#define PKT_HDR1_CTLR_ID_SHIFT		12
+#define PKT_HDR1_CTLR_ID_MASK		(0xf << PKT_HDR1_CTLR_ID_SHIFT)
+#define PKT_HDR1_PKT_ID_SHIFT		16
+#define PKT_HDR1_PKT_ID_MASK		(0xff << PKT_HDR1_PKT_ID_SHIFT)
+#define PROTOCOL_TYPE_I2C		1
+
+/* bit fields definitions for IO Packet Header 2 format */
+#define PKT_HDR2_PAYLOAD_SIZE_SHIFT	0
+#define PKT_HDR2_PAYLOAD_SIZE_MASK	(0xfff << PKT_HDR2_PAYLOAD_SIZE_SHIFT)
+
+/* bit fields definitions for IO Packet Header 3 format */
+#define PKT_HDR3_READ_MODE_SHIFT	19
+#define PKT_HDR3_READ_MODE_MASK		(1 << PKT_HDR3_READ_MODE_SHIFT)
+#define PKT_HDR3_REPEAT_START_SHIFT	16
+#define PKT_HDR3_REPEAT_START_MASK	(1 << PKT_HDR3_REPEAT_START_SHIFT)
+#define PKT_HDR3_SLAVE_ADDR_SHIFT	0
+#define PKT_HDR3_SLAVE_ADDR_MASK	(0x3ff << PKT_HDR3_SLAVE_ADDR_SHIFT)
+
+#define DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT	26
+#define DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK	\
+				(1 << DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT)
+
+/* I2C_CNFG */
+#define I2C_CNFG_NEW_MASTER_FSM_SHIFT	11
+#define I2C_CNFG_NEW_MASTER_FSM_MASK	(1 << I2C_CNFG_NEW_MASTER_FSM_SHIFT)
+#define I2C_CNFG_PACKET_MODE_SHIFT	10
+#define I2C_CNFG_PACKET_MODE_MASK	(1 << I2C_CNFG_PACKET_MODE_SHIFT)
+
+/* I2C_SL_CNFG */
+#define I2C_SL_CNFG_NEWSL_SHIFT		2
+#define I2C_SL_CNFG_NEWSL_MASK		(1 << I2C_SL_CNFG_NEWSL_SHIFT)
+
+/* I2C_FIFO_STATUS */
+#define TX_FIFO_FULL_CNT_SHIFT		0
+#define TX_FIFO_FULL_CNT_MASK		(0xf << TX_FIFO_FULL_CNT_SHIFT)
+#define TX_FIFO_EMPTY_CNT_SHIFT		4
+#define TX_FIFO_EMPTY_CNT_MASK		(0xf << TX_FIFO_EMPTY_CNT_SHIFT)
+
+/* I2C_INTERRUPT_STATUS */
+#define I2C_INT_XFER_COMPLETE_SHIFT	7
+#define I2C_INT_XFER_COMPLETE_MASK	(1 << I2C_INT_XFER_COMPLETE_SHIFT)
+#define I2C_INT_NO_ACK_SHIFT		3
+#define I2C_INT_NO_ACK_MASK		(1 << I2C_INT_NO_ACK_SHIFT)
+#define I2C_INT_ARBITRATION_LOST_SHIFT	2
+#define I2C_INT_ARBITRATION_LOST_MASK	(1 << I2C_INT_ARBITRATION_LOST_SHIFT)
+
+/* I2C_CLK_DIVISOR_REGISTER */
+#define CLK_DIV_STD_FAST_MODE		0x19
+#define CLK_DIV_HS_MODE			1
+#define CLK_MULT_STD_FAST_MODE		8
+
+/**
+ * Returns the bus number of the DVC controller
+ *
+ * @return number of bus, or -1 if there is no DVC active
+ */
+int tegra_i2c_get_dvc_bus(struct udevice **busp);
+
+#endif	/* _TEGRA_I2C_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_i2s.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_i2s.h
new file mode 100644
index 000000000..9319383f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_i2s.h
@@ -0,0 +1,206 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * tegra_i2s.h - Definitions for Tegra124 I2S driver.
+ * Note, some structures (ex, CIF) are different in Tegra114.
+ *
+ * NVIDIA Tegra I2S controller
+ * Modified from dc tegra_regs.h
+ *
+ * Copyright 2018 Google LLC
+ *
+ * Copyright (c) 2011-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA_I2S_H_
+#define _TEGRA_I2S_H_
+
+struct i2s_ctlr {
+	u32 ctrl;		/* I2S_CTRL_0, 0x00 */
+	u32 timing;		/* I2S_TIMING_0, 0x04 */
+	u32 offset;		/* I2S_OFFSET_0, 0x08 */
+	u32 ch_ctrl;		/* I2S_CH_CTRL_0, 0x0C */
+	u32 slot_ctrl;		/* I2S_SLOT_CTRL_0, 0x10 */
+	u32 cif_tx_ctrl;	/* I2S_CIF_TX_CTRL_0, 0x14 */
+	u32 cif_rx_ctrl;	/* I2S_CIF_RX_CTRL_0, 0x18 */
+	u32 flowctl;		/* I2S_FLOWCTL_0, 0x1C */
+	u32 tx_step;		/* I2S_TX_STEP_0, 0x20 */
+	u32 flow_status;	/* I2S_FLOW_STATUS_0, 0x24 */
+	u32 flow_total;		/* I2S_FLOW_TOTAL_0, 0x28 */
+	u32 flow_over;		/* I2S_FLOW_OVER_0, 0x2C */
+	u32 flow_under;		/* I2S_FLOW_UNDER_0, 0x30 */
+	u32 reserved[12];	/* RESERVED, 0x34 - 0x60 */
+	u32 slot_ctrl2;		/* I2S_SLOT_CTRL2_0, 0x64*/
+};
+
+enum {
+	I2S_CTRL_XFER_EN_TX = 1 << 31,
+	I2S_CTRL_XFER_EN_RX = 1 << 30,
+	I2S_CTRL_CG_EN = 1 << 29,
+	I2S_CTRL_SOFT_RESET = 1 << 28,
+	I2S_CTRL_TX_FLOWCTL_EN = 1 << 27,
+
+	I2S_CTRL_OBS_SEL_SHIFT = 24,
+	I2S_CTRL_OBS_SEL_MASK = 7 << I2S_CTRL_OBS_SEL_SHIFT,
+
+	I2S_FRAME_FORMAT_LRCK = 0,
+	I2S_FRAME_FORMAT_FSYNC = 1,
+
+	I2S_CTRL_FRAME_FORMAT_SHIFT = 12,
+	I2S_CTRL_FRAME_FORMAT_MASK = 7 << I2S_CTRL_FRAME_FORMAT_SHIFT,
+	I2S_CTRL_FRAME_FORMAT_LRCK = I2S_FRAME_FORMAT_LRCK <<
+				     I2S_CTRL_FRAME_FORMAT_SHIFT,
+	I2S_CTRL_FRAME_FORMAT_FSYNC = I2S_FRAME_FORMAT_FSYNC <<
+				      I2S_CTRL_FRAME_FORMAT_SHIFT,
+
+	I2S_CTRL_MASTER_ENABLE = 1 << 10,
+
+	I2S_LRCK_LEFT_LOW = 0,
+	I2S_LRCK_RIGHT_LOW = 1,
+
+	I2S_CTRL_LRCK_SHIFT = 9,
+	I2S_CTRL_LRCK_MASK = 1 << I2S_CTRL_LRCK_SHIFT,
+	I2S_CTRL_LRCK_L_LOW = I2S_LRCK_LEFT_LOW  << I2S_CTRL_LRCK_SHIFT,
+	I2S_CTRL_LRCK_R_LOW = I2S_LRCK_RIGHT_LOW << I2S_CTRL_LRCK_SHIFT,
+
+	I2S_CTRL_LPBK_ENABLE = 1 << 8,
+
+	I2S_BIT_CODE_LINEAR = 0,
+	I2S_BIT_CODE_ULAW = 1,
+	I2S_BIT_CODE_ALAW = 2,
+
+	I2S_CTRL_BIT_CODE_SHIFT = 4,
+	I2S_CTRL_BIT_CODE_MASK = 3 << I2S_CTRL_BIT_CODE_SHIFT,
+	I2S_CTRL_BIT_CODE_LINEAR = I2S_BIT_CODE_LINEAR <<
+				   I2S_CTRL_BIT_CODE_SHIFT,
+	I2S_CTRL_BIT_CODE_ULAW = I2S_BIT_CODE_ULAW << I2S_CTRL_BIT_CODE_SHIFT,
+	I2S_CTRL_BIT_CODE_ALAW = I2S_BIT_CODE_ALAW << I2S_CTRL_BIT_CODE_SHIFT,
+
+	I2S_BITS_8 = 1,
+	I2S_BITS_12 = 2,
+	I2S_BITS_16 = 3,
+	I2S_BITS_20 = 4,
+	I2S_BITS_24 = 5,
+	I2S_BITS_28 = 6,
+	I2S_BITS_32 = 7,
+
+	/* Sample container size; see {RX,TX}_MASK field in CH_CTRL below */
+	I2S_CTRL_BIT_SIZE_SHIFT = 0,
+	I2S_CTRL_BIT_SIZE_MASK = 7 << I2S_CTRL_BIT_SIZE_SHIFT,
+	I2S_CTRL_BIT_SIZE_8 = I2S_BITS_8  << I2S_CTRL_BIT_SIZE_SHIFT,
+	I2S_CTRL_BIT_SIZE_12 = I2S_BITS_12 << I2S_CTRL_BIT_SIZE_SHIFT,
+	I2S_CTRL_BIT_SIZE_16 = I2S_BITS_16 << I2S_CTRL_BIT_SIZE_SHIFT,
+	I2S_CTRL_BIT_SIZE_20 = I2S_BITS_20 << I2S_CTRL_BIT_SIZE_SHIFT,
+	I2S_CTRL_BIT_SIZE_24 = I2S_BITS_24 << I2S_CTRL_BIT_SIZE_SHIFT,
+	I2S_CTRL_BIT_SIZE_28 = I2S_BITS_28 << I2S_CTRL_BIT_SIZE_SHIFT,
+	I2S_CTRL_BIT_SIZE_32 = I2S_BITS_32 << I2S_CTRL_BIT_SIZE_SHIFT,
+
+	I2S_TIMING_NON_SYM_ENABLE = 1 << 12,
+	I2S_TIMING_CHANNEL_BIT_COUNT_SHIFT = 0,
+	I2S_TIMING_CHANNEL_BIT_COUNT_MASK_US = 0x7ff,
+	I2S_TIMING_CHANNEL_BIT_COUNT_MASK =
+			I2S_TIMING_CHANNEL_BIT_COUNT_MASK_US <<
+			I2S_TIMING_CHANNEL_BIT_COUNT_SHIFT,
+
+	I2S_OFFSET_RX_DATA_OFFSET_SHIFT = 16,
+	I2S_OFFSET_RX_DATA_OFFSET_MASK_US = 0x7ff,
+	I2S_OFFSET_RX_DATA_OFFSET_MASK = I2S_OFFSET_RX_DATA_OFFSET_MASK_US <<
+					 I2S_OFFSET_RX_DATA_OFFSET_SHIFT,
+	I2S_OFFSET_TX_DATA_OFFSET_SHIFT = 0,
+	I2S_OFFSET_TX_DATA_OFFSET_MASK_US = 0x7ff,
+	I2S_OFFSET_TX_DATA_OFFSET_MASK = I2S_OFFSET_TX_DATA_OFFSET_MASK_US <<
+					 I2S_OFFSET_TX_DATA_OFFSET_SHIFT,
+
+	/* FSYNC width - 1 in bit clocks */
+	I2S_CH_CTRL_FSYNC_WIDTH_SHIFT = 24,
+	I2S_CH_CTRL_FSYNC_WIDTH_MASK_US = 0xff,
+	I2S_CH_CTRL_FSYNC_WIDTH_MASK = I2S_CH_CTRL_FSYNC_WIDTH_MASK_US <<
+				       I2S_CH_CTRL_FSYNC_WIDTH_SHIFT,
+
+	I2S_HIGHZ_NO = 0,
+	I2S_HIGHZ_YES = 1,
+	I2S_HIGHZ_ON_HALF_BIT_CLK = 2,
+
+	I2S_CH_CTRL_HIGHZ_CTRL_SHIFT = 12,
+	I2S_CH_CTRL_HIGHZ_CTRL_MASK = 3 << I2S_CH_CTRL_HIGHZ_CTRL_SHIFT,
+	I2S_CH_CTRL_HIGHZ_CTRL_NO = I2S_HIGHZ_NO <<
+				    I2S_CH_CTRL_HIGHZ_CTRL_SHIFT,
+	I2S_CH_CTRL_HIGHZ_CTRL_YES = I2S_HIGHZ_YES <<
+				     I2S_CH_CTRL_HIGHZ_CTRL_SHIFT,
+	I2S_CH_CTRL_HIGHZ_CTRL_ON_HALF_BIT_CLK = I2S_HIGHZ_ON_HALF_BIT_CLK <<
+						 I2S_CH_CTRL_HIGHZ_CTRL_SHIFT,
+
+	I2S_MSB_FIRST = 0,
+	I2S_LSB_FIRST = 1,
+
+	I2S_CH_CTRL_RX_BIT_ORDER_SHIFT = 10,
+	I2S_CH_CTRL_RX_BIT_ORDER_MASK = 1 << I2S_CH_CTRL_RX_BIT_ORDER_SHIFT,
+	I2S_CH_CTRL_RX_BIT_ORDER_MSB_FIRST = I2S_MSB_FIRST <<
+					     I2S_CH_CTRL_RX_BIT_ORDER_SHIFT,
+	I2S_CH_CTRL_RX_BIT_ORDER_LSB_FIRST = I2S_LSB_FIRST <<
+					     I2S_CH_CTRL_RX_BIT_ORDER_SHIFT,
+	I2S_CH_CTRL_TX_BIT_ORDER_SHIFT = 9,
+	I2S_CH_CTRL_TX_BIT_ORDER_MASK = 1 << I2S_CH_CTRL_TX_BIT_ORDER_SHIFT,
+	I2S_CH_CTRL_TX_BIT_ORDER_MSB_FIRST = I2S_MSB_FIRST <<
+					     I2S_CH_CTRL_TX_BIT_ORDER_SHIFT,
+	I2S_CH_CTRL_TX_BIT_ORDER_LSB_FIRST = I2S_LSB_FIRST <<
+					     I2S_CH_CTRL_TX_BIT_ORDER_SHIFT,
+
+	I2S_POS_EDGE = 0,
+	I2S_NEG_EDGE = 1,
+
+	I2S_CH_CTRL_EGDE_CTRL_SHIFT = 8,
+	I2S_CH_CTRL_EGDE_CTRL_MASK = 1 << I2S_CH_CTRL_EGDE_CTRL_SHIFT,
+	I2S_CH_CTRL_EGDE_CTRL_POS_EDGE = I2S_POS_EDGE <<
+					 I2S_CH_CTRL_EGDE_CTRL_SHIFT,
+	I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE = I2S_NEG_EDGE <<
+					 I2S_CH_CTRL_EGDE_CTRL_SHIFT,
+
+	/* Sample size is # bits from BIT_SIZE minus this field */
+	I2S_CH_CTRL_RX_MASK_BITS_SHIFT = 4,
+	I2S_CH_CTRL_RX_MASK_BITS_MASK_US = 7,
+	I2S_CH_CTRL_RX_MASK_BITS_MASK = I2S_CH_CTRL_RX_MASK_BITS_MASK_US <<
+					I2S_CH_CTRL_RX_MASK_BITS_SHIFT,
+
+	I2S_CH_CTRL_TX_MASK_BITS_SHIFT = 0,
+	I2S_CH_CTRL_TX_MASK_BITS_MASK_US = 7,
+	I2S_CH_CTRL_TX_MASK_BITS_MASK = I2S_CH_CTRL_TX_MASK_BITS_MASK_US <<
+					I2S_CH_CTRL_TX_MASK_BITS_SHIFT,
+
+	/* Number of slots in frame, minus 1 */
+	I2S_SLOT_CTRL_TOTAL_SLOTS_SHIFT = 16,
+	I2S_SLOT_CTRL_TOTAL_SLOTS_MASK_US = 7,
+	I2S_SLOT_CTRL_TOTAL_SLOTS_MASK = I2S_SLOT_CTRL_TOTAL_SLOTS_MASK_US <<
+					 I2S_SLOT_CTRL_TOTAL_SLOTS_SHIFT,
+
+	/* TDM mode slot enable bitmask */
+	I2S_SLOT_CTRL_RX_SLOT_ENABLES_SHIFT = 8,
+	I2S_SLOT_CTRL_RX_SLOT_ENABLES_MASK =
+			0xff << I2S_SLOT_CTRL_RX_SLOT_ENABLES_SHIFT,
+
+	I2S_SLOT_CTRL_TX_SLOT_ENABLES_SHIFT = 0,
+	I2S_SLOT_CTRL_TX_SLOT_ENABLES_MASK = 0xff <<
+					   I2S_SLOT_CTRL_TX_SLOT_ENABLES_SHIFT,
+
+	I2S_FILTER_LINEAR = 0,
+	I2S_FILTER_QUAD = 1,
+
+	I2S_FLOWCTL_FILTER_SHIFT = 31,
+	I2S_FLOWCTL_FILTER_MASK = 1 << I2S_FLOWCTL_FILTER_SHIFT,
+	I2S_FLOWCTL_FILTER_LINEAR = I2S_FILTER_LINEAR <<
+				    I2S_FLOWCTL_FILTER_SHIFT,
+	I2S_FLOWCTL_FILTER_QUAD = I2S_FILTER_QUAD << I2S_FLOWCTL_FILTER_SHIFT,
+
+	I2S_TX_STEP_SHIFT = 0,
+	I2S_TX_STEP_MASK_US = 0xffff,
+	I2S_TX_STEP_MASK = I2S_TX_STEP_MASK_US << I2S_TX_STEP_SHIFT,
+
+	I2S_FLOW_STATUS_UNDERFLOW = 1 << 31,
+	I2S_FLOW_STATUS_OVERFLOW = 1 << 30,
+	I2S_FLOW_STATUS_MONITOR_INT_EN = 1 << 4,
+	I2S_FLOW_STATUS_COUNTER_CLR = 1 << 3,
+	I2S_FLOW_STATUS_MONITOR_CLR = 1 << 2,
+	I2S_FLOW_STATUS_COUNTER_EN = 1 << 1,
+	I2S_FLOW_STATUS_MONITOR_EN = 1 << 0,
+};
+
+#endif	/* _TEGRA_I2C_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_mmc.h
new file mode 100644
index 000000000..d6a55764b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/tegra_mmc.h
@@ -0,0 +1,148 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Portions Copyright (C) 2011-2012,2019 NVIDIA Corporation
+ */
+
+#ifndef __TEGRA_MMC_H_
+#define __TEGRA_MMC_H_
+
+#include <clk.h>
+#include <reset.h>
+#include <fdtdec.h>
+#include <asm/gpio.h>
+
+/* for mmc_config definition */
+#include <mmc.h>
+
+#ifndef __ASSEMBLY__
+struct tegra_mmc {
+	unsigned int	sysad;		/* _SYSTEM_ADDRESS_0 */
+	unsigned short	blksize;	/* _BLOCK_SIZE_BLOCK_COUNT_0 15:00 */
+	unsigned short	blkcnt;		/* _BLOCK_SIZE_BLOCK_COUNT_0 31:16 */
+	unsigned int	argument;	/* _ARGUMENT_0 */
+	unsigned short	trnmod;		/* _CMD_XFER_MODE_0 15:00 xfer mode */
+	unsigned short	cmdreg;		/* _CMD_XFER_MODE_0 31:16 cmd reg */
+	unsigned int	rspreg0;	/* _RESPONSE_R0_R1_0 CMD RESP 31:00 */
+	unsigned int	rspreg1;	/* _RESPONSE_R2_R3_0 CMD RESP 63:32 */
+	unsigned int	rspreg2;	/* _RESPONSE_R4_R5_0 CMD RESP 95:64 */
+	unsigned int	rspreg3;	/* _RESPONSE_R6_R7_0 CMD RESP 127:96 */
+	unsigned int	bdata;		/* _BUFFER_DATA_PORT_0 */
+	unsigned int	prnsts;		/* _PRESENT_STATE_0 */
+	unsigned char	hostctl;	/* _POWER_CONTROL_HOST_0 7:00 */
+	unsigned char	pwrcon;		/* _POWER_CONTROL_HOST_0 15:8 */
+	unsigned char	blkgap;		/* _POWER_CONTROL_HOST_9 23:16 */
+	unsigned char	wakcon;		/* _POWER_CONTROL_HOST_0 31:24 */
+	unsigned short	clkcon;		/* _CLOCK_CONTROL_0 15:00 */
+	unsigned char	timeoutcon;	/* _TIMEOUT_CTRL 23:16 */
+	unsigned char	swrst;		/* _SW_RESET_ 31:24 */
+	unsigned int	norintsts;	/* _INTERRUPT_STATUS_0 */
+	unsigned int	norintstsen;	/* _INTERRUPT_STATUS_ENABLE_0 */
+	unsigned int	norintsigen;	/* _INTERRUPT_SIGNAL_ENABLE_0 */
+	unsigned short	acmd12errsts;	/* _AUTO_CMD12_ERR_STATUS_0 15:00 */
+	unsigned char	res1[2];	/* _RESERVED 31:16 */
+	unsigned int	capareg;	/* _CAPABILITIES_0 */
+	unsigned char	res2[4];	/* RESERVED, offset 44h-47h */
+	unsigned int	maxcurr;	/* _MAXIMUM_CURRENT_0 */
+	unsigned char	res3[4];	/* RESERVED, offset 4Ch-4Fh */
+	unsigned short	setacmd12err;	/* offset 50h */
+	unsigned short	setinterr;	/* offset 52h */
+	unsigned char	admaerr;	/* offset 54h */
+	unsigned char	res4[3];	/* RESERVED, offset 55h-57h */
+	unsigned long	admaaddr;	/* offset 58h-5Fh */
+	unsigned char	res5[0x9c];	/* RESERVED, offset 60h-FBh */
+	unsigned short	slotintstatus;	/* offset FCh */
+	unsigned short	hcver;		/* HOST Version */
+	unsigned int	venclkctl;	/* _VENDOR_CLOCK_CNTRL_0,    100h */
+	unsigned int	venspictl;	/* _VENDOR_SPI_CNTRL_0,      104h */
+	unsigned int	venspiintsts;	/* _VENDOR_SPI_INT_STATUS_0, 108h */
+	unsigned int	venceatactl;	/* _VENDOR_CEATA_CNTRL_0,    10Ch */
+	unsigned int	venbootctl;	/* _VENDOR_BOOT_CNTRL_0,     110h */
+	unsigned int	venbootacktout;	/* _VENDOR_BOOT_ACK_TIMEOUT, 114h */
+	unsigned int	venbootdattout;	/* _VENDOR_BOOT_DAT_TIMEOUT, 118h */
+	unsigned int	vendebouncecnt;	/* _VENDOR_DEBOUNCE_COUNT_0, 11Ch */
+	unsigned int	venmiscctl;	/* _VENDOR_MISC_CNTRL_0,     120h */
+	unsigned int	res6[47];	/* 0x124 ~ 0x1DC */
+	unsigned int	sdmemcmppadctl;	/* _SDMEMCOMPPADCTRL_0,      1E0h */
+	unsigned int	autocalcfg;	/* _AUTO_CAL_CONFIG_0,       1E4h */
+	unsigned int	autocalintval;	/* _AUTO_CAL_INTERVAL_0,     1E8h */
+	unsigned int	autocalsts;	/* _AUTO_CAL_STATUS_0,       1ECh */
+};
+
+#define TEGRA_MMC_PWRCTL_SD_BUS_POWER				(1 << 0)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8			(5 << 1)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0			(6 << 1)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3			(7 << 1)
+
+#define TEGRA_MMC_HOSTCTL_DMASEL_MASK				(3 << 3)
+#define TEGRA_MMC_HOSTCTL_DMASEL_SDMA				(0 << 3)
+#define TEGRA_MMC_HOSTCTL_DMASEL_ADMA2_32BIT			(2 << 3)
+#define TEGRA_MMC_HOSTCTL_DMASEL_ADMA2_64BIT			(3 << 3)
+
+#define TEGRA_MMC_TRNMOD_DMA_ENABLE				(1 << 0)
+#define TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE			(1 << 1)
+#define TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_WRITE		(0 << 4)
+#define TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ			(1 << 4)
+#define TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT			(1 << 5)
+
+#define TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_MASK			(3 << 0)
+#define TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE		(0 << 0)
+#define TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136		(1 << 0)
+#define TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48		(2 << 0)
+#define TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY	(3 << 0)
+
+#define TEGRA_MMC_TRNMOD_CMD_CRC_CHECK				(1 << 3)
+#define TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK			(1 << 4)
+#define TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER	(1 << 5)
+
+#define TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD			(1 << 0)
+#define TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT			(1 << 1)
+
+#define TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE			(1 << 0)
+#define TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE			(1 << 1)
+#define TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE			(1 << 2)
+
+#define TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT			8
+#define TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_MASK			(0xff << 8)
+
+#define TEGRA_MMC_MISCON_ENABLE_EXT_LOOPBACK			(1 << 17)
+
+#define TEGRA_MMC_SWRST_SW_RESET_FOR_ALL			(1 << 0)
+#define TEGRA_MMC_SWRST_SW_RESET_FOR_CMD_LINE			(1 << 1)
+#define TEGRA_MMC_SWRST_SW_RESET_FOR_DAT_LINE			(1 << 2)
+
+#define TEGRA_MMC_NORINTSTS_CMD_COMPLETE			(1 << 0)
+#define TEGRA_MMC_NORINTSTS_XFER_COMPLETE			(1 << 1)
+#define TEGRA_MMC_NORINTSTS_DMA_INTERRUPT			(1 << 3)
+#define TEGRA_MMC_NORINTSTS_ERR_INTERRUPT			(1 << 15)
+#define TEGRA_MMC_NORINTSTS_CMD_TIMEOUT				(1 << 16)
+
+#define TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE			(1 << 0)
+#define TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE			(1 << 1)
+#define TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT			(1 << 3)
+#define TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY		(1 << 4)
+#define TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY			(1 << 5)
+
+#define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE			(1 << 1)
+
+/* SDMMC1/3 settings from SDMMCx Initialization Sequence of TRM */
+#define MEMCOMP_PADCTRL_VREF	7
+#define AUTO_CAL_ENABLE		(1 << 29)
+#define AUTO_CAL_ACTIVE		(1 << 31)
+#define AUTO_CAL_START		(1 << 31)
+#if defined(CONFIG_TEGRA210)
+#define AUTO_CAL_PD_OFFSET	(0x7D << 8)
+#define AUTO_CAL_PU_OFFSET	(0 << 0)
+#define IO_TRIM_BYPASS_MASK	(1 << 2)
+#define TRIM_VAL_SHIFT		24
+#define TRIM_VAL_MASK		(0x1F << TRIM_VAL_SHIFT)
+#define TAP_VAL_SHIFT		16
+#define TAP_VAL_MASK		(0xFF << TAP_VAL_SHIFT)
+#else
+#define AUTO_CAL_PD_OFFSET	(0x70 << 8)
+#define AUTO_CAL_PU_OFFSET	(0x62 << 0)
+#endif
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* __TEGRA_MMC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/timer.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/timer.h
new file mode 100644
index 000000000..1c4decacd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/timer.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+/* Tegra20 timer functions */
+
+#ifndef _TEGRA_TIMER_H
+#define _TEGRA_TIMER_H
+
+/* returns the current monotonic timer value in microseconds */
+unsigned long timer_get_us(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/uart.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/uart.h
new file mode 100644
index 000000000..24f0bdd51
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/uart.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _UART_H_
+#define _UART_H_
+
+/* UART registers */
+struct uart_ctlr {
+	uint uart_thr_dlab_0;		/* UART_THR_DLAB_0_0, offset 00 */
+	uint uart_ier_dlab_0;		/* UART_IER_DLAB_0_0, offset 04 */
+	uint uart_iir_fcr;		/* UART_IIR_FCR_0, offset 08 */
+	uint uart_lcr;			/* UART_LCR_0, offset 0C */
+	uint uart_mcr;			/* UART_MCR_0, offset 10 */
+	uint uart_lsr;			/* UART_LSR_0, offset 14 */
+	uint uart_msr;			/* UART_MSR_0, offset 18 */
+	uint uart_spr;			/* UART_SPR_0, offset 1C */
+	uint uart_irda_csr;		/* UART_IRDA_CSR_0, offset 20 */
+	uint uart_reserved[6];		/* Reserved, unused, offset 24-38*/
+	uint uart_asr;			/* UART_ASR_0, offset 3C */
+};
+
+#define NVRM_PLLP_FIXED_FREQ_KHZ	216000
+#define NV_DEFAULT_DEBUG_BAUD		115200
+
+#define UART_FCR_TRIGGER_3	0x30	/* Mask for trigger set at 3 */
+
+#endif	/* UART_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/usb.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/usb.h
new file mode 100644
index 000000000..6e6ea1443
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/usb.h
@@ -0,0 +1,360 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
+ */
+
+#ifndef _TEGRA_USB_H_
+#define _TEGRA_USB_H_
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+	/* 0x000 */
+	uint id;
+	uint reserved0;
+	uint host;
+	uint device;
+
+	/* 0x010 */
+	uint txbuf;
+	uint rxbuf;
+	uint reserved1[2];
+
+	/* 0x020 */
+	uint reserved2[56];
+
+	/* 0x100 */
+	u16 cap_length;
+	u16 hci_version;
+	uint hcs_params;
+	uint hcc_params;
+	uint reserved3[5];
+
+	/* 0x120 */
+	uint dci_version;
+	uint dcc_params;
+	uint reserved4[2];
+
+#ifdef CONFIG_TEGRA20
+	/* 0x130 */
+	uint reserved4_2[4];
+
+	/* 0x140 */
+	uint usb_cmd;
+	uint usb_sts;
+	uint usb_intr;
+	uint frindex;
+
+	/* 0x150 */
+	uint reserved5;
+	uint periodic_list_base;
+	uint async_list_addr;
+	uint async_tt_sts;
+
+	/* 0x160 */
+	uint burst_size;
+	uint tx_fill_tuning;
+	uint reserved6;   /* is this port_sc1 on some controllers? */
+	uint icusb_ctrl;
+
+	/* 0x170 */
+	uint ulpi_viewport;
+	uint reserved7;
+	uint endpt_nak;
+	uint endpt_nak_enable;
+
+	/* 0x180 */
+	uint reserved;
+	uint port_sc1;
+	uint reserved8[6];
+
+	/* 0x1a0 */
+	uint reserved9;
+	uint otgsc;
+	uint usb_mode;
+	uint endpt_setup_stat;
+
+	/* 0x1b0 */
+	uint reserved10[20];
+
+	/* 0x200 */
+	uint reserved11[0x80];
+#else
+	/* 0x130 */
+	uint usb_cmd;
+	uint usb_sts;
+	uint usb_intr;
+	uint frindex;
+
+	/* 0x140 */
+	uint reserved5;
+	uint periodic_list_base;
+	uint async_list_addr;
+	uint reserved5_1;
+
+	/* 0x150 */
+	uint burst_size;
+	uint tx_fill_tuning;
+	uint reserved6;
+	uint icusb_ctrl;
+
+	/* 0x160 */
+	uint ulpi_viewport;
+	uint reserved7[3];
+
+	/* 0x170 */
+	uint reserved;
+	uint port_sc1;
+	uint reserved8[6];
+
+	/* 0x190 */
+	uint reserved9[8];
+
+	/* 0x1b0 */
+	uint reserved10;
+	uint hostpc1_devlc;
+	uint reserved10_1[2];
+
+	/* 0x1c0 */
+	uint reserved10_2[4];
+
+	/* 0x1d0 */
+	uint reserved10_3[4];
+
+	/* 0x1e0 */
+	uint reserved10_4[4];
+
+	/* 0x1f0 */
+	uint reserved10_5;
+	uint otgsc;
+	uint usb_mode;
+	uint reserved10_6;
+
+	/* 0x200 */
+	uint endpt_nak;
+	uint endpt_nak_enable;
+	uint endpt_setup_stat;
+	uint reserved11_1[0x7D];
+#endif
+
+	/* 0x400 */
+	uint susp_ctrl;
+	uint phy_vbus_sensors;
+	uint phy_vbus_wakeup_id;
+	uint phy_alt_vbus_sys;
+
+#ifdef CONFIG_TEGRA20
+	/* 0x410 */
+	uint usb1_legacy_ctrl;
+	uint reserved12[4];
+
+	/* 0x424 */
+	uint ulpi_timing_ctrl_0;
+	uint ulpi_timing_ctrl_1;
+	uint reserved13[53];
+#else
+
+	/* 0x410 */
+	uint usb1_legacy_ctrl;
+	uint reserved12[3];
+
+	/* 0x420 */
+	uint reserved13[56];
+#endif
+
+	/* 0x500 */
+	uint reserved14[64 * 3];
+
+	/* 0x800 */
+	uint utmip_pll_cfg0;
+	uint utmip_pll_cfg1;
+	uint utmip_xcvr_cfg0;
+	uint utmip_bias_cfg0;
+
+	/* 0x810 */
+	uint utmip_hsrx_cfg0;
+	uint utmip_hsrx_cfg1;
+	uint utmip_fslsrx_cfg0;
+	uint utmip_fslsrx_cfg1;
+
+	/* 0x820 */
+	uint utmip_tx_cfg0;
+	uint utmip_misc_cfg0;
+	uint utmip_misc_cfg1;
+	uint utmip_debounce_cfg0;
+
+	/* 0x830 */
+	uint utmip_bat_chrg_cfg0;
+	uint utmip_spare_cfg0;
+	uint utmip_xcvr_cfg1;
+	uint utmip_bias_cfg1;
+};
+
+/* USB1_LEGACY_CTRL */
+#define USB1_NO_LEGACY_MODE		1
+
+#define VBUS_SENSE_CTL_SHIFT			1
+#define VBUS_SENSE_CTL_MASK			(3 << VBUS_SENSE_CTL_SHIFT)
+#define VBUS_SENSE_CTL_VBUS_WAKEUP		0
+#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP	1
+#define VBUS_SENSE_CTL_AB_SESS_VLD		2
+#define VBUS_SENSE_CTL_A_SESS_VLD		3
+
+/* USBx_IF_USB_SUSP_CTRL_0 */
+#define UTMIP_PHY_ENB			        (1 << 12)
+#define UTMIP_RESET			        (1 << 11)
+#define USB_PHY_CLK_VALID			(1 << 7)
+#define USB_SUSP_CLR				(1 << 5)
+
+#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30)
+/* USB2_IF_USB_SUSP_CTRL_0 */
+#define ULPI_PHY_ENB				(1 << 13)
+
+/* USB2_IF_ULPI_TIMING_CTRL_0 */
+#define ULPI_OUTPUT_PINMUX_BYP			(1 << 10)
+#define ULPI_CLKOUT_PINMUX_BYP			(1 << 11)
+
+/* USB2_IF_ULPI_TIMING_CTRL_1 */
+#define ULPI_DATA_TRIMMER_LOAD			(1 << 0)
+#define ULPI_DATA_TRIMMER_SEL(x)		(((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD		(1 << 16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x)	(((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD			(1 << 24)
+#define ULPI_DIR_TRIMMER_SEL(x)			(((x) & 0x7) << 25)
+#endif
+
+/* USBx_UTMIP_MISC_CFG0 */
+#define UTMIP_SUSPEND_EXIT_ON_EDGE		(1 << 22)
+
+/* USBx_UTMIP_MISC_CFG1 */
+#define UTMIP_PHY_XTAL_CLOCKEN			(1 << 30)
+
+/*
+ * Tegra 3 and later: Moved to Clock and Reset register space, see
+ * CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0
+ */
+#define UTMIP_PLLU_STABLE_COUNT_SHIFT		6
+#define UTMIP_PLLU_STABLE_COUNT_MASK		\
+				(0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
+/*
+ * Tegra 3 and later: Moved to Clock and Reset register space, see
+ * CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0
+ */
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT	18
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK		\
+				(0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
+
+/* USBx_UTMIP_PLL_CFG1_0 */
+/* Tegra 3 and later: Moved to Clock and Reset register space */
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT	27
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK	\
+				(0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
+#define UTMIP_XTAL_FREQ_COUNT_SHIFT		0
+#define UTMIP_XTAL_FREQ_COUNT_MASK		0xfff
+
+/* USBx_UTMIP_BIAS_CFG0_0 */
+#define UTMIP_HSDISCON_LEVEL_MSB		(1 << 24)
+#define UTMIP_OTGPD				(1 << 11)
+#define UTMIP_BIASPD				(1 << 10)
+#define UTMIP_HSDISCON_LEVEL_SHIFT		2
+#define UTMIP_HSDISCON_LEVEL_MASK		\
+				(0x3 << UTMIP_HSDISCON_LEVEL_SHIFT)
+#define UTMIP_HSSQUELCH_LEVEL_SHIFT		0
+#define UTMIP_HSSQUELCH_LEVEL_MASK		\
+				(0x3 << UTMIP_HSSQUELCH_LEVEL_SHIFT)
+
+/* USBx_UTMIP_BIAS_CFG1_0 */
+#define UTMIP_FORCE_PDTRK_POWERDOWN		1
+#define UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT	8
+#define UTMIP_BIAS_DEBOUNCE_TIMESCALE_MASK	\
+				(0x3f << UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT)
+#define UTMIP_BIAS_PDTRK_COUNT_SHIFT		3
+#define UTMIP_BIAS_PDTRK_COUNT_MASK		\
+				(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
+
+/* USBx_UTMIP_DEBOUNCE_CFG0_0 */
+#define UTMIP_DEBOUNCE_CFG0_SHIFT		0
+#define UTMIP_DEBOUNCE_CFG0_MASK		0xffff
+
+/* USBx_UTMIP_TX_CFG0_0 */
+#define UTMIP_FS_PREAMBLE_J			(1 << 19)
+
+/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
+#define UTMIP_PD_CHRG				1
+
+/* USBx_UTMIP_SPARE_CFG0_0 */
+#define FUSE_SETUP_SEL				(1 << 3)
+
+/* USBx_UTMIP_HSRX_CFG0_0 */
+#define UTMIP_IDLE_WAIT_SHIFT			15
+#define UTMIP_IDLE_WAIT_MASK			(0x1f << UTMIP_IDLE_WAIT_SHIFT)
+#define UTMIP_ELASTIC_LIMIT_SHIFT		10
+#define UTMIP_ELASTIC_LIMIT_MASK		\
+				(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
+
+/* USBx_UTMIP_HSRX_CFG1_0 */
+#define UTMIP_HS_SYNC_START_DLY_SHIFT		1
+#define UTMIP_HS_SYNC_START_DLY_MASK		\
+				(0x1f << UTMIP_HS_SYNC_START_DLY_SHIFT)
+
+/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
+#define IC_ENB1					(1 << 3)
+
+#ifdef CONFIG_TEGRA20
+/* PORTSC1, USB1 */
+#define PTS1_SHIFT				31
+#define PTS1_MASK				(1 << PTS1_SHIFT)
+#define STS1					(1 << 30)
+
+/* PORTSC, USB2, USB3 */
+#define PTS_SHIFT		30
+#define PTS_MASK		(3U << PTS_SHIFT)
+#define STS			(1 << 29)
+#else
+/* USB2D_HOSTPC1_DEVLC_0 */
+#define PTS_SHIFT				29
+#define PTS_MASK				(0x7U << PTS_SHIFT)
+#define STS						(1 << 28)
+#endif
+
+#define PTS_UTMI	0
+#define PTS_RESERVED	1
+#define PTS_ULPI	2
+#define PTS_ICUSB_SER	3
+#define PTS_HSIC	4
+
+/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
+#define WKOC				(1 << 22)
+#define WKDS				(1 << 21)
+#define WKCN				(1 << 20)
+
+/* USBx_UTMIP_XCVR_CFG0_0 */
+#define UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
+#define UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
+#define UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
+#define UTMIP_XCVR_LSBIAS_SE			(1 << 21)
+#define UTMIP_XCVR_HSSLEW_MSB_SHIFT		25
+#define UTMIP_XCVR_HSSLEW_MSB_MASK		\
+			(0x7f << UTMIP_XCVR_HSSLEW_MSB_SHIFT)
+#define UTMIP_XCVR_SETUP_MSB_SHIFT	22
+#define UTMIP_XCVR_SETUP_MSB_MASK	(0x7 << UTMIP_XCVR_SETUP_MSB_SHIFT)
+#define UTMIP_XCVR_SETUP_SHIFT		0
+#define UTMIP_XCVR_SETUP_MASK		(0xf << UTMIP_XCVR_SETUP_SHIFT)
+
+/* USBx_UTMIP_XCVR_CFG1_0 */
+#define UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT		18
+#define UTMIP_XCVR_TERM_RANGE_ADJ_MASK		\
+			(0xf << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT)
+#define UTMIP_FORCE_PDDISC_POWERDOWN		(1 << 0)
+#define UTMIP_FORCE_PDCHRP_POWERDOWN		(1 << 2)
+#define UTMIP_FORCE_PDDR_POWERDOWN		(1 << 4)
+
+/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
+#define VBUS_VLD_STS			(1 << 26)
+#define VBUS_B_SESS_VLD_SW_VALUE	(1 << 12)
+#define VBUS_B_SESS_VLD_SW_EN		(1 << 11)
+
+/* Setup USB on the board */
+int usb_process_devicetree(const void *blob);
+
+#endif	/* _TEGRA_USB_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/warmboot.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/warmboot.h
new file mode 100644
index 000000000..3f02073ee
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/warmboot.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _WARM_BOOT_H_
+#define _WARM_BOOT_H_
+
+#define STRAP_OPT_A_RAM_CODE_SHIFT	4
+#define STRAP_OPT_A_RAM_CODE_MASK	(0xf << STRAP_OPT_A_RAM_CODE_SHIFT)
+
+/* Defines the supported operating modes */
+enum fuse_operating_mode {
+	MODE_PRODUCTION = 3,
+	MODE_UNDEFINED,
+};
+
+/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */
+enum {
+	HASH_LENGTH = 4
+};
+
+/* Defines the storage for a hash value (128 bits) */
+struct hash {
+	u32 hash[HASH_LENGTH];
+};
+
+/*
+ * Defines the code header information for the boot rom.
+ *
+ * The code immediately follows the code header.
+ *
+ * Note that the code header needs to be 16 bytes aligned to preserve
+ * the alignment of relevant data for hash and decryption computations without
+ * requiring extra copies to temporary memory areas.
+ */
+struct wb_header {
+	u32 length_insecure;	/* length of the code header */
+	u32 reserved[3];
+	struct hash hash;	/* hash of header+code, starts next field*/
+	struct hash random_aes_block;	/* a data block to aid security. */
+	u32 length_secure;	/* length of the code header */
+	u32 destination;	/* destination address to put the wb code */
+	u32 entry_point;	/* execution address of the wb code */
+	u32 code_length;	/* length of the code */
+};
+
+/*
+ * The warm boot code needs direct access to these registers since it runs in
+ * SRAM and cannot call other U-Boot code.
+ */
+union osc_ctrl_reg {
+	struct {
+		u32 xoe:1;
+		u32 xobp:1;
+		u32 reserved0:2;
+		u32 xofs:6;
+		u32 reserved1:2;
+		u32 xods:5;
+		u32 reserved2:3;
+		u32 oscfi_spare:8;
+		u32 pll_ref_div:2;
+		u32 osc_freq:2;
+	};
+	u32 word;
+};
+
+union pllx_base_reg {
+	struct {
+		u32 divm:5;
+		u32 reserved0:3;
+		u32 divn:10;
+		u32 reserved1:2;
+		u32 divp:3;
+		u32 reserved2:4;
+		u32 lock:1;
+		u32 reserved3:1;
+		u32 ref_dis:1;
+		u32 enable:1;
+		u32 bypass:1;
+	};
+	u32 word;
+};
+
+union pllx_misc_reg {
+	struct {
+		u32 vcocon:4;
+		u32 lfcon:4;
+		u32 cpcon:4;
+		u32 lock_sel:6;
+		u32 reserved0:1;
+		u32 lock_enable:1;
+		u32 reserved1:1;
+		u32 dccon:1;
+		u32 pts:2;
+		u32 reserved2:6;
+		u32 out1_div_byp:1;
+		u32 out1_inv_clk:1;
+	};
+	u32 word;
+};
+
+/*
+ * TODO: This register is not documented in the TRM yet. We could move this
+ * into the EMC and give it a proper interface, but not while it is
+ * undocumented.
+ */
+union scratch3_reg {
+	struct {
+		u32 pllx_base_divm:5;
+		u32 pllx_base_divn:10;
+		u32 pllx_base_divp:3;
+		u32 pllx_misc_lfcon:4;
+		u32 pllx_misc_cpcon:4;
+	};
+	u32 word;
+};
+
+
+/**
+ * Save warmboot memory settings for a later resume
+ *
+ * @return 0 if ok, -1 on error
+ */
+int warmboot_save_sdram_params(void);
+
+int warmboot_prepare_code(u32 seg_address, u32 seg_length);
+int sign_data_block(u8 *source, u32 length, u8 *signature);
+void wb_start(void);	/* Start of WB assembly code */
+void wb_end(void);	/* End of WB assembly code */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra/xusb-padctl.h b/roms/u-boot/arch/arm/include/asm/arch-tegra/xusb-padctl.h
new file mode 100644
index 000000000..7e14d8109
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra/xusb-padctl.h
@@ -0,0 +1,25 @@
+#ifndef _TEGRA_XUSB_PADCTL_H_
+#define _TEGRA_XUSB_PADCTL_H_
+
+struct tegra_xusb_phy;
+
+/**
+ * tegra_xusb_phy_get() - obtain a reference to a specified padctl PHY
+ * @type: the type of PHY to obtain
+ *
+ * The type of PHY varies between SoC generations. Typically there are XUSB,
+ * PCIe and SATA PHYs, though not all generations support all of them. The
+ * value of type can usually be directly parsed from a device tree.
+ *
+ * Return: a pointer to the PHY or NULL if no such PHY exists
+ */
+struct tegra_xusb_phy *tegra_xusb_phy_get(unsigned int type);
+
+void tegra_xusb_padctl_init(void);
+void tegra_xusb_padctl_exit(void);
+int tegra_xusb_phy_prepare(struct tegra_xusb_phy *phy);
+int tegra_xusb_phy_enable(struct tegra_xusb_phy *phy);
+int tegra_xusb_phy_disable(struct tegra_xusb_phy *phy);
+int tegra_xusb_phy_unprepare(struct tegra_xusb_phy *phy);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/clock-tables.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/clock-tables.h
new file mode 100644
index 000000000..9b95b339e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/clock-tables.h
@@ -0,0 +1,392 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra114 clock PLL tables */
+
+#ifndef _TEGRA114_CLOCK_TABLES_H_
+#define _TEGRA114_CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+	CLOCK_ID_FIRST,
+	CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+	CLOCK_ID_MEMORY,
+	CLOCK_ID_PERIPH,
+	CLOCK_ID_AUDIO,
+	CLOCK_ID_USB,
+	CLOCK_ID_DISPLAY,
+
+	/* now the simple ones */
+	CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_EPCI,
+	CLOCK_ID_SFROM32KHZ,
+
+	/* These are the base clocks (inputs to the Tegra SOC) */
+	CLOCK_ID_32KHZ,
+	CLOCK_ID_OSC,
+	CLOCK_ID_CLK_M,
+
+	CLOCK_ID_COUNT,	/* number of PLLs */
+	CLOCK_ID_DISPLAY2,	/* placeholder */
+	CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+	PERIPH_ID_FIRST,
+
+	/* Low word: 31:0 (DEVICES_L) */
+	PERIPH_ID_CPU = PERIPH_ID_FIRST,
+	PERIPH_ID_COP,
+	PERIPH_ID_TRIGSYS,
+	PERIPH_ID_RESERVED3,
+	PERIPH_ID_RTC,
+	PERIPH_ID_TMR,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+
+	/* 8 */
+	PERIPH_ID_GPIO,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SPDIF,
+	PERIPH_ID_I2S1,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_NDFLASH,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC4,
+
+	/* 16 */
+	PERIPH_ID_RESERVED16,
+	PERIPH_ID_PWM,
+	PERIPH_ID_I2S2,
+	PERIPH_ID_EPP,
+	PERIPH_ID_VI,
+	PERIPH_ID_2D,
+	PERIPH_ID_USBD,
+	PERIPH_ID_ISP,
+
+	/* 24 */
+	PERIPH_ID_3D,
+	PERIPH_ID_RESERVED24,
+	PERIPH_ID_DISP2,
+	PERIPH_ID_DISP1,
+	PERIPH_ID_HOST1X,
+	PERIPH_ID_VCP,
+	PERIPH_ID_I2S0,
+	PERIPH_ID_CACHE2,
+
+	/* Middle word: 63:32 (DEVICES_H) */
+	PERIPH_ID_MEM,
+	PERIPH_ID_AHBDMA,
+	PERIPH_ID_APBDMA,
+	PERIPH_ID_RESERVED35,
+	PERIPH_ID_KBC,
+	PERIPH_ID_STAT_MON,
+	PERIPH_ID_PMC,
+	PERIPH_ID_FUSE,
+
+	/* 40 */
+	PERIPH_ID_KFUSE,
+	PERIPH_ID_SBC1,
+	PERIPH_ID_SNOR,
+	PERIPH_ID_RESERVED43,
+	PERIPH_ID_SBC2,
+	PERIPH_ID_RESERVED45,
+	PERIPH_ID_SBC3,
+	PERIPH_ID_I2C5,
+
+	/* 48 */
+	PERIPH_ID_DSI,
+	PERIPH_ID_TVO,
+	PERIPH_ID_MIPI,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_CSI,
+	PERIPH_ID_TVDAC,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_UART3,
+
+	/* 56 */
+	PERIPH_ID_RESERVED56,
+	PERIPH_ID_EMC,
+	PERIPH_ID_USB2,
+	PERIPH_ID_USB3,
+	PERIPH_ID_MPE,
+	PERIPH_ID_VDE,
+	PERIPH_ID_BSEA,
+	PERIPH_ID_BSEV,
+
+	/* Upper word 95:64 (DEVICES_U) */
+	PERIPH_ID_SPEEDO,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_SBC4,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_PCIE,
+	PERIPH_ID_OWR,
+
+	/* 72 */
+	PERIPH_ID_AFI,
+	PERIPH_ID_CORESIGHT,
+	PERIPH_ID_PCIEXCLK,
+	PERIPH_ID_AVPUCQ,
+	PERIPH_ID_RESERVED76,
+	PERIPH_ID_RESERVED77,
+	PERIPH_ID_RESERVED78,
+	PERIPH_ID_DTV,
+
+	/* 80 */
+	PERIPH_ID_NANDSPEED,
+	PERIPH_ID_I2CSLOW,
+	PERIPH_ID_DSIB,
+	PERIPH_ID_RESERVED83,
+	PERIPH_ID_IRAMA,
+	PERIPH_ID_IRAMB,
+	PERIPH_ID_IRAMC,
+	PERIPH_ID_IRAMD,
+
+	/* 88 */
+	PERIPH_ID_CRAM2,
+	PERIPH_ID_RESERVED89,
+	PERIPH_ID_MDOUBLER,
+	PERIPH_ID_RESERVED91,
+	PERIPH_ID_SUSOUT,
+	PERIPH_ID_RESERVED93,
+	PERIPH_ID_RESERVED94,
+	PERIPH_ID_RESERVED95,
+
+	PERIPH_ID_VW_FIRST,
+	/* V word: 31:0 */
+	PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST,
+	PERIPH_ID_CPULP,
+	PERIPH_ID_3D2,
+	PERIPH_ID_MSELECT,
+	PERIPH_ID_TSENSOR,
+	PERIPH_ID_I2S3,
+	PERIPH_ID_I2S4,
+	PERIPH_ID_I2C4,
+
+	/* 104 */
+	PERIPH_ID_SBC5,
+	PERIPH_ID_SBC6,
+	PERIPH_ID_AUDIO,
+	PERIPH_ID_APBIF,
+	PERIPH_ID_DAM0,
+	PERIPH_ID_DAM1,
+	PERIPH_ID_DAM2,
+	PERIPH_ID_HDA2CODEC2X,
+
+	/* 112 */
+	PERIPH_ID_ATOMICS,
+	PERIPH_ID_EX_RESERVED17,
+	PERIPH_ID_EX_RESERVED18,
+	PERIPH_ID_EX_RESERVED19,
+	PERIPH_ID_EX_RESERVED20,
+	PERIPH_ID_EX_RESERVED21,
+	PERIPH_ID_EX_RESERVED22,
+	PERIPH_ID_ACTMON,
+
+	/* 120 */
+	PERIPH_ID_EX_RESERVED24,
+	PERIPH_ID_EX_RESERVED25,
+	PERIPH_ID_EX_RESERVED26,
+	PERIPH_ID_EX_RESERVED27,
+	PERIPH_ID_SATA,
+	PERIPH_ID_HDA,
+	PERIPH_ID_EX_RESERVED30,
+	PERIPH_ID_EX_RESERVED31,
+
+	/* W word: 31:0 */
+	PERIPH_ID_HDA2HDMICODEC,
+	PERIPH_ID_RESERVED1_SATACOLD,
+	PERIPH_ID_RESERVED2_PCIERX0,
+	PERIPH_ID_RESERVED3_PCIERX1,
+	PERIPH_ID_RESERVED4_PCIERX2,
+	PERIPH_ID_RESERVED5_PCIERX3,
+	PERIPH_ID_RESERVED6_PCIERX4,
+	PERIPH_ID_RESERVED7_PCIERX5,
+
+	/* 136 */
+	PERIPH_ID_CEC,
+	PERIPH_ID_PCIE2_IOBIST,
+	PERIPH_ID_EMC_IOBIST,
+	PERIPH_ID_HDMI_IOBIST,
+	PERIPH_ID_SATA_IOBIST,
+	PERIPH_ID_MIPI_IOBIST,
+	PERIPH_ID_EMC1_IOBIST,
+	PERIPH_ID_XUSB,
+
+	/* 144 */
+	PERIPH_ID_CILAB,
+	PERIPH_ID_CILCD,
+	PERIPH_ID_CILE,
+	PERIPH_ID_DSIA_LP,
+	PERIPH_ID_DSIB_LP,
+	PERIPH_ID_RESERVED21_ENTROPY,
+	PERIPH_ID_RESERVED22_W,
+	PERIPH_ID_RESERVED23_W,
+
+	/* 152 */
+	PERIPH_ID_RESERVED24_W,
+	PERIPH_ID_AMX0,
+	PERIPH_ID_ADX0,
+	PERIPH_ID_DVFS,
+	PERIPH_ID_XUSB_SS,
+	PERIPH_ID_EMC_DLL,
+	PERIPH_ID_MC1,
+	PERIPH_ID_EMC1,
+
+	PERIPH_ID_COUNT,
+	PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+	PLL_OUT1,
+	PLL_OUT2,
+	PLL_OUT3,
+	PLL_OUT4
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ */
+enum periphc_internal_id {
+	/* 0x00 */
+	PERIPHC_I2S1,
+	PERIPHC_I2S2,
+	PERIPHC_SPDIF_OUT,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_PWM,
+	PERIPHC_05h,
+	PERIPHC_SBC2,
+	PERIPHC_SBC3,
+
+	/* 0x08 */
+	PERIPHC_08h,
+	PERIPHC_I2C1,
+	PERIPHC_I2C5,
+	PERIPHC_0bh,
+	PERIPHC_0ch,
+	PERIPHC_SBC1,
+	PERIPHC_DISP1,
+	PERIPHC_DISP2,
+
+	/* 0x10 */
+	PERIPHC_CVE,
+	PERIPHC_11h,
+	PERIPHC_VI,
+	PERIPHC_13h,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC2,
+	PERIPHC_G3D,
+	PERIPHC_G2D,
+
+	/* 0x18 */
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC4,
+	PERIPHC_VFIR,
+	PERIPHC_EPP,
+	PERIPHC_MPE,
+	PERIPHC_MIPI,
+	PERIPHC_UART1,
+	PERIPHC_UART2,
+
+	/* 0x20 */
+	PERIPHC_HOST1X,
+	PERIPHC_21h,
+	PERIPHC_TVO,
+	PERIPHC_HDMI,
+	PERIPHC_24h,
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_EMC,
+
+	/* 0x28 */
+	PERIPHC_UART3,
+	PERIPHC_29h,
+	PERIPHC_VI_SENSOR,
+	PERIPHC_2bh,
+	PERIPHC_2ch,
+	PERIPHC_SBC4,
+	PERIPHC_I2C3,
+	PERIPHC_SDMMC3,
+
+	/* 0x30 */
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_VDE,
+	PERIPHC_OWR,
+	PERIPHC_NOR,
+	PERIPHC_CSITE,
+	PERIPHC_I2S0,
+	PERIPHC_37h,
+
+	PERIPHC_VW_FIRST,
+	/* 0x38 */
+	PERIPHC_G3D2 = PERIPHC_VW_FIRST,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+
+	/* 0x40 */
+	PERIPHC_AUDIO,
+	PERIPHC_41h,
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+	PERIPHC_ACTMON,
+	PERIPHC_EXTPERIPH1,
+
+	/* 0x48 */
+	PERIPHC_EXTPERIPH2,
+	PERIPHC_EXTPERIPH3,
+	PERIPHC_NANDSPEED,
+	PERIPHC_I2CSLOW,
+	PERIPHC_SYS,
+	PERIPHC_SPEEDO,
+	PERIPHC_4eh,
+	PERIPHC_4fh,
+
+	/* 0x50 */
+	PERIPHC_50h,
+	PERIPHC_51h,
+	PERIPHC_52h,
+	PERIPHC_53h,
+	PERIPHC_SATAOOB,
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+
+	PERIPHC_COUNT,
+
+	PERIPHC_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */
+#define PERIPH_REG(id) \
+	(id < PERIPH_ID_VW_FIRST) ? \
+		((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+		(id) < PERIPH_ID_COUNT)
+
+#endif	/* _TEGRA114_CLOCK_TABLES_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/clock.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/clock.h
new file mode 100644
index 000000000..84e1da42e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/clock.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra114 clock control functions */
+
+#ifndef _TEGRA114_CLOCK_H_
+#define _TEGRA114_CLOCK_H_
+
+#include <asm/arch-tegra/clock.h>
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT          28
+#define OSC_FREQ_MASK           (0xF << OSC_FREQ_SHIFT)
+
+/* CLK_RST_CONTROLLER_PLLC_MISC_0 */
+#define PLLC_IDDQ		(1 << 26)
+
+#endif	/* _TEGRA114_CLOCK_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/flow.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/flow.h
new file mode 100644
index 000000000..4f0fc3b7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/flow.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA114_FLOW_H_
+#define _TEGRA114_FLOW_H_
+
+struct flow_ctlr {
+	u32 halt_cpu_events;
+	u32 halt_cop_events;
+	u32 cpu_csr;
+	u32 cop_csr;
+	u32 xrq_events;
+	u32 halt_cpu1_events;
+	u32 cpu1_csr;
+	u32 halt_cpu2_events;
+	u32 cpu2_csr;
+	u32 halt_cpu3_events;
+	u32 cpu3_csr;
+	u32 cluster_control;
+};
+
+#endif	/* _TEGRA114_FLOW_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/funcmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/funcmux.h
new file mode 100644
index 000000000..f3b1bd47e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/funcmux.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra114 high-level function multiplexing */
+
+#ifndef _TEGRA114_FUNCMUX_H_
+#define _TEGRA114_FUNCMUX_H_
+
+#include <asm/arch-tegra/funcmux.h>
+
+/* Configs supported by the func mux */
+enum {
+	FUNCMUX_DEFAULT = 0,	/* default config */
+
+	/* UART configs */
+	FUNCMUX_UART4_GMI = 0,
+};
+#endif	/* _TEGRA114_FUNCMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/gp_padctrl.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
new file mode 100644
index 000000000..69b35a141
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA114_GP_PADCTRL_H_
+#define _TEGRA114_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+	u32	modereg;	/* 0x00: APB_MISC_GP_MODEREG */
+	u32	hidrev;		/* 0x04: APB_MISC_GP_HIDREV */
+	u32	reserved0[22];	/* 0x08 - 0x5C: */
+	u32	emu_revid;	/* 0x60: APB_MISC_GP_EMU_REVID */
+	u32	xactor_scratch;	/* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+	u32	aocfg1;		/* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+	u32	aocfg2;		/* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */
+	u32	atcfg1;		/* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+	u32	atcfg2;		/* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+	u32	atcfg3;		/* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
+	u32	atcfg4;		/* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */
+	u32	atcfg5;		/* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
+	u32	cdev1cfg;	/* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
+	u32	cdev2cfg;	/* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
+	u32	reserved1;	/* 0x8C: */
+	u32	dap1cfg;	/* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
+	u32	dap2cfg;	/* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
+	u32	dap3cfg;	/* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
+	u32	dap4cfg;	/* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
+	u32	dbgcfg;		/* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
+	u32	reserved2[3];	/* 0xA4 - 0xAC: */
+	u32	sdio3cfg;	/* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
+	u32	spicfg;		/* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
+	u32	uaacfg;		/* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
+	u32	uabcfg;		/* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
+	u32	uart2cfg;	/* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
+	u32	uart3cfg;	/* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
+	u32	reserved3[9];	/* 0xC8-0xE8: */
+	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+	u32	reserved4[3];	/* 0xF0-0xF8: */
+	u32	ddccfg;		/* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */
+	u32	gmacfg;		/* 0x100: APB_MISC_GP_GMACFGPADCTRL */
+	u32	reserved5[3];	/* 0x104-0x10C: */
+	u32	gmecfg;		/* 0x110: APB_MISC_GP_GMECFGPADCTRL */
+	u32	gmfcfg;		/* 0x114: APB_MISC_GP_GMFCFGPADCTRL */
+	u32	gmgcfg;		/* 0x118: APB_MISC_GP_GMGCFGPADCTRL */
+	u32	gmhcfg;		/* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */
+	u32	owrcfg;		/* 0x120: APB_MISC_GP_OWRCFGPADCTRL */
+	u32	uadcfg;		/* 0x124: APB_MISC_GP_UADCFGPADCTRL */
+	u32	reserved6;	/* 0x128: */
+	u32	dev3cfg;	/* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */
+	u32	reserved7[2];	/* 0x130 - 0x134: */
+	u32	ceccfg;		/* 0x138: APB_MISC_GP_CECCFGPADCTRL */
+	u32	reserved8[22];	/* 0x13C - 0x190: */
+	u32	atcfg6;		/* 0x194: APB_MISC_GP_ATCFG6PADCTRL */
+	u32	dap5cfg;	/* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */
+	u32	vbuscfg;	/* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */
+	u32	aocfg3;		/* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */
+	u32	hvccfg0;	/* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */
+	u32	sdio4cfg;	/* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */
+	u32	aocfg0;		/* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */
+};
+
+/* SDMMC1/3 settings from section 27.5 of T114 TRM */
+#define SDIOCFG_DRVUP_SLWF	0
+#define SDIOCFG_DRVDN_SLWR	0
+#define SDIOCFG_DRVUP		0x24
+#define SDIOCFG_DRVDN		0x14
+
+#endif	/* _TEGRA114_GP_PADCTRL_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/gpio.h
new file mode 100644
index 000000000..4f084e2de
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/gpio.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA114_GPIO_H_
+#define _TEGRA114_GPIO_H_
+
+/*
+ * The Tegra114 GPIO controller has 246 GPIOS in 8 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS	4	/* number of ports per bank */
+#define TEGRA_GPIO_BANKS	8	/* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+#include <asm/arch-tegra30/gpio.h>
+
+#endif	/* _TEGRA114_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/mc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/mc.h
new file mode 100644
index 000000000..3930bab57
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/mc.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2014
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA114_MC_H_
+#define _TEGRA114_MC_H_
+
+/**
+ * Defines the memory controller registers we need/care about
+ */
+struct mc_ctlr {
+	u32 reserved0[4];			/* offset 0x00 - 0x0C */
+	u32 mc_smmu_config;			/* offset 0x10 */
+	u32 mc_smmu_tlb_config;			/* offset 0x14 */
+	u32 mc_smmu_ptc_config;			/* offset 0x18 */
+	u32 mc_smmu_ptb_asid;			/* offset 0x1C */
+	u32 mc_smmu_ptb_data;			/* offset 0x20 */
+	u32 reserved1[3];			/* offset 0x24 - 0x2C */
+	u32 mc_smmu_tlb_flush;			/* offset 0x30 */
+	u32 mc_smmu_ptc_flush;			/* offset 0x34 */
+	u32 reserved2[6];			/* offset 0x38 - 0x4C */
+	u32 mc_emem_cfg;			/* offset 0x50 */
+	u32 mc_emem_adr_cfg;			/* offset 0x54 */
+	u32 mc_emem_adr_cfg_dev0;		/* offset 0x58 */
+	u32 mc_emem_adr_cfg_dev1;		/* offset 0x5C */
+	u32 reserved3[12];			/* offset 0x60 - 0x8C */
+	u32 mc_emem_arb_reserved[28];		/* offset 0x90 - 0xFC */
+	u32 reserved4[338];			/* offset 0x100 - 0x644 */
+	u32 mc_video_protect_bom;		/* offset 0x648 */
+	u32 mc_video_protect_size_mb;		/* offset 0x64c */
+	u32 mc_video_protect_reg_ctrl;		/* offset 0x650 */
+};
+
+#endif	/* _TEGRA114_MC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/pinmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/pinmux.h
new file mode 100644
index 000000000..414b22e20
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/pinmux.h
@@ -0,0 +1,328 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef _TEGRA114_PINMUX_H_
+#define _TEGRA114_PINMUX_H_
+
+enum pmux_pingrp {
+	PMUX_PINGRP_ULPI_DATA0_PO1,
+	PMUX_PINGRP_ULPI_DATA1_PO2,
+	PMUX_PINGRP_ULPI_DATA2_PO3,
+	PMUX_PINGRP_ULPI_DATA3_PO4,
+	PMUX_PINGRP_ULPI_DATA4_PO5,
+	PMUX_PINGRP_ULPI_DATA5_PO6,
+	PMUX_PINGRP_ULPI_DATA6_PO7,
+	PMUX_PINGRP_ULPI_DATA7_PO0,
+	PMUX_PINGRP_ULPI_CLK_PY0,
+	PMUX_PINGRP_ULPI_DIR_PY1,
+	PMUX_PINGRP_ULPI_NXT_PY2,
+	PMUX_PINGRP_ULPI_STP_PY3,
+	PMUX_PINGRP_DAP3_FS_PP0,
+	PMUX_PINGRP_DAP3_DIN_PP1,
+	PMUX_PINGRP_DAP3_DOUT_PP2,
+	PMUX_PINGRP_DAP3_SCLK_PP3,
+	PMUX_PINGRP_PV0,
+	PMUX_PINGRP_PV1,
+	PMUX_PINGRP_SDMMC1_CLK_PZ0,
+	PMUX_PINGRP_SDMMC1_CMD_PZ1,
+	PMUX_PINGRP_SDMMC1_DAT3_PY4,
+	PMUX_PINGRP_SDMMC1_DAT2_PY5,
+	PMUX_PINGRP_SDMMC1_DAT1_PY6,
+	PMUX_PINGRP_SDMMC1_DAT0_PY7,
+	PMUX_PINGRP_CLK2_OUT_PW5 = (0x68 / 4),
+	PMUX_PINGRP_CLK2_REQ_PCC5,
+	PMUX_PINGRP_HDMI_INT_PN7 = (0x110 / 4),
+	PMUX_PINGRP_DDC_SCL_PV4,
+	PMUX_PINGRP_DDC_SDA_PV5,
+	PMUX_PINGRP_UART2_RXD_PC3 = (0x164 / 4),
+	PMUX_PINGRP_UART2_TXD_PC2,
+	PMUX_PINGRP_UART2_RTS_N_PJ6,
+	PMUX_PINGRP_UART2_CTS_N_PJ5,
+	PMUX_PINGRP_UART3_TXD_PW6,
+	PMUX_PINGRP_UART3_RXD_PW7,
+	PMUX_PINGRP_UART3_CTS_N_PA1,
+	PMUX_PINGRP_UART3_RTS_N_PC0,
+	PMUX_PINGRP_PU0,
+	PMUX_PINGRP_PU1,
+	PMUX_PINGRP_PU2,
+	PMUX_PINGRP_PU3,
+	PMUX_PINGRP_PU4,
+	PMUX_PINGRP_PU5,
+	PMUX_PINGRP_PU6,
+	PMUX_PINGRP_GEN1_I2C_SDA_PC5,
+	PMUX_PINGRP_GEN1_I2C_SCL_PC4,
+	PMUX_PINGRP_DAP4_FS_PP4,
+	PMUX_PINGRP_DAP4_DIN_PP5,
+	PMUX_PINGRP_DAP4_DOUT_PP6,
+	PMUX_PINGRP_DAP4_SCLK_PP7,
+	PMUX_PINGRP_CLK3_OUT_PEE0,
+	PMUX_PINGRP_CLK3_REQ_PEE1,
+	PMUX_PINGRP_GMI_WP_N_PC7,
+	PMUX_PINGRP_GMI_IORDY_PI5,
+	PMUX_PINGRP_GMI_WAIT_PI7,
+	PMUX_PINGRP_GMI_ADV_N_PK0,
+	PMUX_PINGRP_GMI_CLK_PK1,
+	PMUX_PINGRP_GMI_CS0_N_PJ0,
+	PMUX_PINGRP_GMI_CS1_N_PJ2,
+	PMUX_PINGRP_GMI_CS2_N_PK3,
+	PMUX_PINGRP_GMI_CS3_N_PK4,
+	PMUX_PINGRP_GMI_CS4_N_PK2,
+	PMUX_PINGRP_GMI_CS6_N_PI3,
+	PMUX_PINGRP_GMI_CS7_N_PI6,
+	PMUX_PINGRP_GMI_AD0_PG0,
+	PMUX_PINGRP_GMI_AD1_PG1,
+	PMUX_PINGRP_GMI_AD2_PG2,
+	PMUX_PINGRP_GMI_AD3_PG3,
+	PMUX_PINGRP_GMI_AD4_PG4,
+	PMUX_PINGRP_GMI_AD5_PG5,
+	PMUX_PINGRP_GMI_AD6_PG6,
+	PMUX_PINGRP_GMI_AD7_PG7,
+	PMUX_PINGRP_GMI_AD8_PH0,
+	PMUX_PINGRP_GMI_AD9_PH1,
+	PMUX_PINGRP_GMI_AD10_PH2,
+	PMUX_PINGRP_GMI_AD11_PH3,
+	PMUX_PINGRP_GMI_AD12_PH4,
+	PMUX_PINGRP_GMI_AD13_PH5,
+	PMUX_PINGRP_GMI_AD14_PH6,
+	PMUX_PINGRP_GMI_AD15_PH7,
+	PMUX_PINGRP_GMI_A16_PJ7,
+	PMUX_PINGRP_GMI_A17_PB0,
+	PMUX_PINGRP_GMI_A18_PB1,
+	PMUX_PINGRP_GMI_A19_PK7,
+	PMUX_PINGRP_GMI_WR_N_PI0,
+	PMUX_PINGRP_GMI_OE_N_PI1,
+	PMUX_PINGRP_GMI_DQS_P_PJ3,
+	PMUX_PINGRP_GMI_RST_N_PI4,
+	PMUX_PINGRP_GEN2_I2C_SCL_PT5,
+	PMUX_PINGRP_GEN2_I2C_SDA_PT6,
+	PMUX_PINGRP_SDMMC4_CLK_PCC4,
+	PMUX_PINGRP_SDMMC4_CMD_PT7,
+	PMUX_PINGRP_SDMMC4_DAT0_PAA0,
+	PMUX_PINGRP_SDMMC4_DAT1_PAA1,
+	PMUX_PINGRP_SDMMC4_DAT2_PAA2,
+	PMUX_PINGRP_SDMMC4_DAT3_PAA3,
+	PMUX_PINGRP_SDMMC4_DAT4_PAA4,
+	PMUX_PINGRP_SDMMC4_DAT5_PAA5,
+	PMUX_PINGRP_SDMMC4_DAT6_PAA6,
+	PMUX_PINGRP_SDMMC4_DAT7_PAA7,
+	PMUX_PINGRP_CAM_MCLK_PCC0 = (0x284 / 4),
+	PMUX_PINGRP_PCC1,
+	PMUX_PINGRP_PBB0,
+	PMUX_PINGRP_CAM_I2C_SCL_PBB1,
+	PMUX_PINGRP_CAM_I2C_SDA_PBB2,
+	PMUX_PINGRP_PBB3,
+	PMUX_PINGRP_PBB4,
+	PMUX_PINGRP_PBB5,
+	PMUX_PINGRP_PBB6,
+	PMUX_PINGRP_PBB7,
+	PMUX_PINGRP_PCC2,
+	PMUX_PINGRP_JTAG_RTCK,
+	PMUX_PINGRP_PWR_I2C_SCL_PZ6,
+	PMUX_PINGRP_PWR_I2C_SDA_PZ7,
+	PMUX_PINGRP_KB_ROW0_PR0,
+	PMUX_PINGRP_KB_ROW1_PR1,
+	PMUX_PINGRP_KB_ROW2_PR2,
+	PMUX_PINGRP_KB_ROW3_PR3,
+	PMUX_PINGRP_KB_ROW4_PR4,
+	PMUX_PINGRP_KB_ROW5_PR5,
+	PMUX_PINGRP_KB_ROW6_PR6,
+	PMUX_PINGRP_KB_ROW7_PR7,
+	PMUX_PINGRP_KB_ROW8_PS0,
+	PMUX_PINGRP_KB_ROW9_PS1,
+	PMUX_PINGRP_KB_ROW10_PS2,
+	PMUX_PINGRP_KB_COL0_PQ0 = (0x2fc / 4),
+	PMUX_PINGRP_KB_COL1_PQ1,
+	PMUX_PINGRP_KB_COL2_PQ2,
+	PMUX_PINGRP_KB_COL3_PQ3,
+	PMUX_PINGRP_KB_COL4_PQ4,
+	PMUX_PINGRP_KB_COL5_PQ5,
+	PMUX_PINGRP_KB_COL6_PQ6,
+	PMUX_PINGRP_KB_COL7_PQ7,
+	PMUX_PINGRP_CLK_32K_OUT_PA0,
+	PMUX_PINGRP_SYS_CLK_REQ_PZ5,
+	PMUX_PINGRP_CORE_PWR_REQ,
+	PMUX_PINGRP_CPU_PWR_REQ,
+	PMUX_PINGRP_PWR_INT_N,
+	PMUX_PINGRP_CLK_32K_IN,
+	PMUX_PINGRP_OWR,
+	PMUX_PINGRP_DAP1_FS_PN0,
+	PMUX_PINGRP_DAP1_DIN_PN1,
+	PMUX_PINGRP_DAP1_DOUT_PN2,
+	PMUX_PINGRP_DAP1_SCLK_PN3,
+	PMUX_PINGRP_CLK1_REQ_PEE2,
+	PMUX_PINGRP_CLK1_OUT_PW4,
+	PMUX_PINGRP_SPDIF_IN_PK6,
+	PMUX_PINGRP_SPDIF_OUT_PK5,
+	PMUX_PINGRP_DAP2_FS_PA2,
+	PMUX_PINGRP_DAP2_DIN_PA4,
+	PMUX_PINGRP_DAP2_DOUT_PA5,
+	PMUX_PINGRP_DAP2_SCLK_PA3,
+	PMUX_PINGRP_DVFS_PWM_PX0,
+	PMUX_PINGRP_GPIO_X1_AUD_PX1,
+	PMUX_PINGRP_GPIO_X3_AUD_PX3,
+	PMUX_PINGRP_DVFS_CLK_PX2,
+	PMUX_PINGRP_GPIO_X4_AUD_PX4,
+	PMUX_PINGRP_GPIO_X5_AUD_PX5,
+	PMUX_PINGRP_GPIO_X6_AUD_PX6,
+	PMUX_PINGRP_GPIO_X7_AUD_PX7,
+	PMUX_PINGRP_SDMMC3_CLK_PA6 = (0x390 / 4),
+	PMUX_PINGRP_SDMMC3_CMD_PA7,
+	PMUX_PINGRP_SDMMC3_DAT0_PB7,
+	PMUX_PINGRP_SDMMC3_DAT1_PB6,
+	PMUX_PINGRP_SDMMC3_DAT2_PB5,
+	PMUX_PINGRP_SDMMC3_DAT3_PB4,
+	PMUX_PINGRP_HDMI_CEC_PEE3 = (0x3e0 / 4),
+	PMUX_PINGRP_SDMMC1_WP_N_PV3,
+	PMUX_PINGRP_SDMMC3_CD_N_PV2,
+	PMUX_PINGRP_GPIO_W2_AUD_PW2,
+	PMUX_PINGRP_GPIO_W3_AUD_PW3,
+	PMUX_PINGRP_USB_VBUS_EN0_PN4,
+	PMUX_PINGRP_USB_VBUS_EN1_PN5,
+	PMUX_PINGRP_SDMMC3_CLK_LB_IN_PEE5,
+	PMUX_PINGRP_SDMMC3_CLK_LB_OUT_PEE4,
+	PMUX_PINGRP_GMI_CLK_LB,
+	PMUX_PINGRP_RESET_OUT_N,
+	PMUX_PINGRP_COUNT,
+};
+
+enum pmux_drvgrp {
+	PMUX_DRVGRP_AO1,
+	PMUX_DRVGRP_AO2,
+	PMUX_DRVGRP_AT1,
+	PMUX_DRVGRP_AT2,
+	PMUX_DRVGRP_AT3,
+	PMUX_DRVGRP_AT4,
+	PMUX_DRVGRP_AT5,
+	PMUX_DRVGRP_CDEV1,
+	PMUX_DRVGRP_CDEV2,
+	PMUX_DRVGRP_DAP1 = (0x28 / 4),
+	PMUX_DRVGRP_DAP2,
+	PMUX_DRVGRP_DAP3,
+	PMUX_DRVGRP_DAP4,
+	PMUX_DRVGRP_DBG,
+	PMUX_DRVGRP_SDIO3 = (0x48 / 4),
+	PMUX_DRVGRP_SPI,
+	PMUX_DRVGRP_UAA,
+	PMUX_DRVGRP_UAB,
+	PMUX_DRVGRP_UART2,
+	PMUX_DRVGRP_UART3,
+	PMUX_DRVGRP_SDIO1 = (0x84 / 4),
+	PMUX_DRVGRP_DDC = (0x94 / 4),
+	PMUX_DRVGRP_GMA,
+	PMUX_DRVGRP_GME = (0xa8 / 4),
+	PMUX_DRVGRP_GMF,
+	PMUX_DRVGRP_GMG,
+	PMUX_DRVGRP_GMH,
+	PMUX_DRVGRP_OWR,
+	PMUX_DRVGRP_UDA,
+	PMUX_DRVGRP_DEV3 = (0xc4 / 4),
+	PMUX_DRVGRP_CEC = (0xd0 / 4),
+	PMUX_DRVGRP_AT6 = (0x12c / 4),
+	PMUX_DRVGRP_DAP5,
+	PMUX_DRVGRP_USB_VBUS_EN,
+	PMUX_DRVGRP_AO3,
+	PMUX_DRVGRP_HV0,
+	PMUX_DRVGRP_SDIO4,
+	PMUX_DRVGRP_AO0,
+	PMUX_DRVGRP_COUNT,
+};
+
+enum pmux_func {
+	PMUX_FUNC_DEFAULT,
+	PMUX_FUNC_BLINK,
+	PMUX_FUNC_CEC,
+	PMUX_FUNC_CLDVFS,
+	PMUX_FUNC_CLK,
+	PMUX_FUNC_CLK12,
+	PMUX_FUNC_CPU,
+	PMUX_FUNC_DAP,
+	PMUX_FUNC_DAP1,
+	PMUX_FUNC_DAP2,
+	PMUX_FUNC_DEV3,
+	PMUX_FUNC_DISPLAYA,
+	PMUX_FUNC_DISPLAYA_ALT,
+	PMUX_FUNC_DISPLAYB,
+	PMUX_FUNC_DTV,
+	PMUX_FUNC_EMC_DLL,
+	PMUX_FUNC_EXTPERIPH1,
+	PMUX_FUNC_EXTPERIPH2,
+	PMUX_FUNC_EXTPERIPH3,
+	PMUX_FUNC_GMI,
+	PMUX_FUNC_GMI_ALT,
+	PMUX_FUNC_HDA,
+	PMUX_FUNC_HSI,
+	PMUX_FUNC_I2C1,
+	PMUX_FUNC_I2C2,
+	PMUX_FUNC_I2C3,
+	PMUX_FUNC_I2C4,
+	PMUX_FUNC_I2CPWR,
+	PMUX_FUNC_I2S0,
+	PMUX_FUNC_I2S1,
+	PMUX_FUNC_I2S2,
+	PMUX_FUNC_I2S3,
+	PMUX_FUNC_I2S4,
+	PMUX_FUNC_IRDA,
+	PMUX_FUNC_KBC,
+	PMUX_FUNC_NAND,
+	PMUX_FUNC_NAND_ALT,
+	PMUX_FUNC_OWR,
+	PMUX_FUNC_PMI,
+	PMUX_FUNC_PWM0,
+	PMUX_FUNC_PWM1,
+	PMUX_FUNC_PWM2,
+	PMUX_FUNC_PWM3,
+	PMUX_FUNC_PWRON,
+	PMUX_FUNC_RESET_OUT_N,
+	PMUX_FUNC_RTCK,
+	PMUX_FUNC_SDMMC1,
+	PMUX_FUNC_SDMMC2,
+	PMUX_FUNC_SDMMC3,
+	PMUX_FUNC_SDMMC4,
+	PMUX_FUNC_SOC,
+	PMUX_FUNC_SPDIF,
+	PMUX_FUNC_SPI1,
+	PMUX_FUNC_SPI2,
+	PMUX_FUNC_SPI3,
+	PMUX_FUNC_SPI4,
+	PMUX_FUNC_SPI5,
+	PMUX_FUNC_SPI6,
+	PMUX_FUNC_SYSCLK,
+	PMUX_FUNC_TRACE,
+	PMUX_FUNC_UARTA,
+	PMUX_FUNC_UARTB,
+	PMUX_FUNC_UARTC,
+	PMUX_FUNC_UARTD,
+	PMUX_FUNC_ULPI,
+	PMUX_FUNC_USB,
+	PMUX_FUNC_VGP1,
+	PMUX_FUNC_VGP2,
+	PMUX_FUNC_VGP3,
+	PMUX_FUNC_VGP4,
+	PMUX_FUNC_VGP5,
+	PMUX_FUNC_VGP6,
+	PMUX_FUNC_VI,
+	PMUX_FUNC_VI_ALT1,
+	PMUX_FUNC_VI_ALT3,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_RSVD4,
+	PMUX_FUNC_COUNT,
+};
+
+#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x868
+#define TEGRA_PMX_SOC_HAS_IO_CLAMPING
+#define TEGRA_PMX_SOC_HAS_DRVGRPS
+#define TEGRA_PMX_GRPS_HAVE_LPMD
+#define TEGRA_PMX_GRPS_HAVE_SCHMT
+#define TEGRA_PMX_GRPS_HAVE_HSM
+#define TEGRA_PMX_PINS_HAVE_E_INPUT
+#define TEGRA_PMX_PINS_HAVE_LOCK
+#define TEGRA_PMX_PINS_HAVE_OD
+#define TEGRA_PMX_PINS_HAVE_IO_RESET
+#define TEGRA_PMX_PINS_HAVE_RCV_SEL
+#include <asm/arch-tegra/pinmux.h>
+
+#endif /* _TEGRA114_PINMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/powergate.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/powergate.h
new file mode 100644
index 000000000..260ea801b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/powergate.h
@@ -0,0 +1,6 @@
+#ifndef _TEGRA114_POWERGATE_H_
+#define _TEGRA114_POWERGATE_H_
+
+#include <asm/arch-tegra/powergate.h>
+
+#endif /* _TEGRA114_POWERGATE_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/sysctr.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/sysctr.h
new file mode 100644
index 000000000..228f423be
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/sysctr.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA114_SYSCTR_H_
+#define _TEGRA114_SYSCTR_H_
+
+struct sysctr_ctlr {
+	u32 cntcr;		/* 0x00: SYSCTR0_CNTCR Counter Control */
+	u32 cntsr;		/* 0x04: SYSCTR0_CNTSR Counter Status */
+	u32 cntcv0;		/* 0x08: SYSCTR0_CNTCV0 Counter Count 31:00 */
+	u32 cntcv1;		/* 0x0C: SYSCTR0_CNTCV1 Counter Count 63:32 */
+	u32 reserved1[4];	/* 0x10 - 0x1C */
+	u32 cntfid0;		/* 0x20: SYSCTR0_CNTFID0 Freq Table Entry */
+	u32 cntfid1;		/* 0x24: SYSCTR0_CNTFID1 Freq Table End */
+	u32 reserved2[1002];	/* 0x28 - 0xFCC */
+	u32 counterid[12];	/* 0xFD0 - 0xFxx CounterID regs, RO */
+};
+
+#define TSC_CNTCR_ENABLE	(1 << 0)	/* Enable */
+#define TSC_CNTCR_HDBG		(1 << 1)	/* Halt on debug */
+
+#endif	/* _TEGRA114_SYSCTR_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra114/tegra.h b/roms/u-boot/arch/arm/include/asm/arch-tegra114/tegra.h
new file mode 100644
index 000000000..317b4bc14
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra114/tegra.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA114_H_
+#define _TEGRA114_H_
+
+#define NV_PA_SDRAM_BASE	0x80000000	/* 0x80000000 for real T114 */
+#define NV_PA_TSC_BASE		0x700F0000	/* System Counter TSC regs */
+#define NV_PA_MC_BASE		0x70019000
+
+#include <asm/arch-tegra/tegra.h>
+
+#define BCT_ODMDATA_OFFSET	1752	/* offset to ODMDATA word */
+
+#undef NVBOOTINFOTABLE_BCTSIZE
+#undef NVBOOTINFOTABLE_BCTPTR
+#define NVBOOTINFOTABLE_BCTSIZE        0x48    /* BCT size in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTPTR 0x4C    /* BCT pointer in BIT in IRAM */
+
+#define MAX_NUM_CPU            4
+
+#endif /* TEGRA114_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/ahb.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/ahb.h
new file mode 100644
index 000000000..d88cdfece
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/ahb.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA124_AHB_H_
+#define _TEGRA124_AHB_H_
+
+struct ahb_ctlr {
+	u32 reserved0;			/* 00h */
+	u32 arbitration_disable;	/* _ARBITRATION_DISABLE_0,	04h */
+	u32 arbitration_priority_ctrl;	/* _ARBITRATION_PRIORITY_CTRL_0,08h */
+	u32 arbitration_usr_protect;	/* _ARBITRATION_USR_PROTECT_0,	0ch */
+	u32 gizmo_ahb_mem;		/* _GIZMO_AHB_MEM_0,		10h */
+	u32 gizmo_apb_dma;		/* _GIZMO_APB_DMA_0,		14h */
+	u32 reserved6[2];		/* 18h, 1ch */
+	u32 gizmo_usb;			/* _GIZMO_USB_0,		20h */
+	u32 gizmo_ahb_xbar_bridge;	/* _GIZMO_AHB_XBAR_BRIDGE_0,	24h */
+	u32 gizmo_cpu_ahb_bridge;	/* _GIZMO_CPU_AHB_BRIDGE_0,	28h */
+	u32 gizmo_cop_ahb_bridge;	/* _GIZMO_COP_AHB_BRIDGE_0,	2ch */
+	u32 gizmo_xbar_apb_ctlr;	/* _GIZMO_XBAR_APB_CTLR_0,	30h */
+	u32 gizmo_vcp_ahb_bridge;	/* _GIZMO_VCP_AHB_BRIDGE_0,	34h */
+	u32 reserved13[2];		/* 38h, 3ch */
+	u32 gizmo_nand;			/* _GIZMO_NAND_0,		40h */
+	u32 reserved15;			/* 44h */
+	u32 gizmo_sdmmc4;		/* _GIZMO_SDMMC4_0,		48h */
+	u32 reserved17;			/* 4ch */
+	u32 gizmo_se;			/* _GIZMO_SE_0,			50h */
+	u32 gizmo_tzram;		/* _GIZMO_TZRAM_0,		54h */
+	u32 reserved20[3];		/* 58h, 5ch, 60h */
+	u32 gizmo_bsev;			/* _GIZMO_BSEV_0,		64h */
+	u32 reserved22[3];		/* 68h, 6ch, 70h */
+	u32 gizmo_bsea;			/* _GIZMO_BSEA_0,		74h */
+	u32 gizmo_nor;			/* _GIZMO_NOR_0,		78h */
+	u32 gizmo_usb2;			/* _GIZMO_USB2_0,		7ch */
+	u32 gizmo_usb3;			/* _GIZMO_USB3_0,		80h */
+	u32 gizmo_sdmmc1;		/* _GIZMO_SDMMC1_0,		84h */
+	u32 gizmo_sdmmc2;		/* _GIZMO_SDMMC2_0,		88h */
+	u32 gizmo_sdmmc3;		/* _GIZMO_SDMMC3_0,		8ch */
+	u32 reserved30[13];		/* 90h ~ c0h */
+	u32 ahb_wrq_empty;		/* _AHB_WRQ_EMPTY_0,		c4h */
+	u32 reserved32[5];		/* c8h ~ d8h */
+	u32 ahb_mem_prefetch_cfg_x;	/* _AHB_MEM_PREFETCH_CFG_X_0,	dch */
+	u32 arbitration_xbar_ctrl;	/* _ARBITRATION_XBAR_CTRL_0,	e0h */
+	u32 ahb_mem_prefetch_cfg3;	/* _AHB_MEM_PREFETCH_CFG3_0,	e4h */
+	u32 ahb_mem_prefetch_cfg4;	/* _AHB_MEM_PREFETCH_CFG3_0,	e8h */
+	u32 avp_ppcs_rd_coh_status;	/* _AVP_PPCS_RD_COH_STATUS_0,	ech */
+	u32 ahb_mem_prefetch_cfg1;	/* _AHB_MEM_PREFETCH_CFG1_0,	f0h */
+	u32 ahb_mem_prefetch_cfg2;	/* _AHB_MEM_PREFETCH_CFG2_0,	f4h */
+	u32 ahbslvmem_status;		/* _AHBSLVMEM_STATUS_0, f8h */
+	/* _ARBITRATION_AHB_MEM_WRQUE_MST_ID_0, fch */
+	u32 arbitration_ahb_mem_wrque_mst_id;
+	u32 arbitration_cpu_abort_addr;	/* _ARBITRATION_CPU_ABORT_ADDR_0,100h */
+	u32 arbitration_cpu_abort_info;	/* _ARBITRATION_CPU_ABORT_INFO_0,104h */
+	u32 arbitration_cop_abort_addr;	/* _ARBITRATION_COP_ABORT_ADDR_0,108h */
+	u32 arbitration_cop_abort_info;	/* _ARBITRATION_COP_ABORT_INFO_0,10ch */
+	u32 reserved46[4];		/* 110h ~ 11ch */
+	u32 avpc_mccif_fifoctrl;	/* _AVPC_MCCIF_FIFOCTRL_0,	120h */
+	u32 timeout_wcoal_avpc;		/* _TIMEOUT_WCOAL_AVPC_0,	124h */
+	u32 mpcorelp_mccif_fifoctrl;	/* _MPCORELP_MCCIF_FIFOCTRL_0,	128h */
+	u32 mpcore_mccif_fifoctrl;	/* _MPCORE_MCCIF_FIFOCTRL_0,	12ch */
+	u32 axicif_fastsync_ctrl;	/* AXICIF_FASTSYNC_CTRL_0,	130h */
+	u32 axicif_fastsync_statistics;	/* _AXICIF_FASTSYNC_STATISTICS_0,134h */
+	/* _AXICIF_FASTSYNC0_CPUCLK_TO_MCCLK_0,	138h */
+	u32 axicif_fastsync0_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC1_CPUCLK_TO_MCCLK_0, 13ch */
+	u32 axicif_fastsync1_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC2_CPUCLK_TO_MCCLK_0, 140h */
+	u32 axicif_fastsync2_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC0_MCCLK_TO_CPUCLK_0, 144h */
+	u32 axicif_fastsync0_mcclk_to_cpuclk;
+	/* _AXICIF_FASTSYNC1_MCCLK_TO_CPUCLK_0, 148h */
+	u32 axicif_fastsync1_mcclk_to_cpuclk;
+	/* _AXICIF_FASTSYNC2_MCCLK_TO_CPUCLK_0, 14ch */
+	u32 axicif_fastsync2_mcclk_to_cpuclk;
+};
+
+#define PPSB_STOPCLK_ENABLE	(1 << 2)
+
+#define GIZ_ENABLE_SPLIT	(1 << 0)
+#define GIZ_ENB_FAST_REARB	(1 << 2)
+#define GIZ_DONT_SPLIT_AHB_WR	(1 << 7)
+
+#define GIZ_USB_IMMEDIATE	(1 << 18)
+
+/* AHB_ARBITRATION_XBAR_CTRL_0 0xe0 */
+#define ARBITRATION_XBAR_CTRL_PPSB_ENABLE	(1 << 2)
+
+#endif	/* _TEGRA124_AHB_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/clock-tables.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/clock-tables.h
new file mode 100644
index 000000000..9f5312531
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/clock-tables.h
@@ -0,0 +1,497 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra124 clock PLL tables */
+
+#ifndef _TEGRA124_CLOCK_TABLES_H_
+#define _TEGRA124_CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+	CLOCK_ID_FIRST,
+	CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+	CLOCK_ID_MEMORY,
+	CLOCK_ID_PERIPH,
+	CLOCK_ID_AUDIO,
+	CLOCK_ID_USB,
+	CLOCK_ID_DISPLAY,
+
+	/* now the simple ones */
+	CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_EPCI,
+	CLOCK_ID_SFROM32KHZ,
+	CLOCK_ID_DP,	/* Special for Tegra124 */
+
+	/* These are the base clocks (inputs to the Tegra SoC) */
+	CLOCK_ID_32KHZ,
+	CLOCK_ID_OSC,
+	CLOCK_ID_CLK_M,
+
+	CLOCK_ID_COUNT,	/* number of PLLs */
+
+	/*
+	 * These are clock IDs that are used in table clock_source[][]
+	 * but will not be assigned as a clock source for any peripheral.
+	 */
+	CLOCK_ID_DISPLAY2,
+	CLOCK_ID_CGENERAL2,
+	CLOCK_ID_CGENERAL3,
+	CLOCK_ID_MEMORY2,
+	CLOCK_ID_SRC2,
+
+	CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+	PERIPH_ID_FIRST,
+
+	/* Low word: 31:0 (DEVICES_L) */
+	PERIPH_ID_CPU = PERIPH_ID_FIRST,
+	PERIPH_ID_COP,
+	PERIPH_ID_TRIGSYS,
+	PERIPH_ID_ISPB,
+	PERIPH_ID_RESERVED4,
+	PERIPH_ID_TMR,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+
+	/* 8 */
+	PERIPH_ID_GPIO,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SPDIF,
+	PERIPH_ID_I2S1,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_RESERVED13,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC4,
+
+	/* 16 */
+	PERIPH_ID_TCW,
+	PERIPH_ID_PWM,
+	PERIPH_ID_I2S2,
+	PERIPH_ID_RESERVED19,
+	PERIPH_ID_VI,
+	PERIPH_ID_RESERVED21,
+	PERIPH_ID_USBD,
+	PERIPH_ID_ISP,
+
+	/* 24 */
+	PERIPH_ID_RESERVED24,
+	PERIPH_ID_RESERVED25,
+	PERIPH_ID_DISP2,
+	PERIPH_ID_DISP1,
+	PERIPH_ID_HOST1X,
+	PERIPH_ID_VCP,
+	PERIPH_ID_I2S0,
+	PERIPH_ID_CACHE2,
+
+	/* Middle word: 63:32 (DEVICES_H) */
+	PERIPH_ID_MEM,
+	PERIPH_ID_AHBDMA,
+	PERIPH_ID_APBDMA,
+	PERIPH_ID_RESERVED35,
+	PERIPH_ID_RESERVED36,
+	PERIPH_ID_STAT_MON,
+	PERIPH_ID_RESERVED38,
+	PERIPH_ID_FUSE,
+
+	/* 40 */
+	PERIPH_ID_KFUSE,
+	PERIPH_ID_SBC1,
+	PERIPH_ID_SNOR,
+	PERIPH_ID_RESERVED43,
+	PERIPH_ID_SBC2,
+	PERIPH_ID_XIO,
+	PERIPH_ID_SBC3,
+	PERIPH_ID_I2C5,
+
+	/* 48 */
+	PERIPH_ID_DSI,
+	PERIPH_ID_RESERVED49,
+	PERIPH_ID_HSI,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_CSI,
+	PERIPH_ID_RESERVED53,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_UART3,
+
+	/* 56 */
+	PERIPH_ID_MIPI_CAL,
+	PERIPH_ID_EMC,
+	PERIPH_ID_USB2,
+	PERIPH_ID_USB3,
+	PERIPH_ID_RESERVED60,
+	PERIPH_ID_VDE,
+	PERIPH_ID_BSEA,
+	PERIPH_ID_BSEV,
+
+	/* Upper word 95:64 (DEVICES_U) */
+	PERIPH_ID_RESERVED64,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_SBC4,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_PCIE,
+	PERIPH_ID_OWR,
+
+	/* 72 */
+	PERIPH_ID_AFI,
+	PERIPH_ID_CORESIGHT,
+	PERIPH_ID_PCIEXCLK,
+	PERIPH_ID_AVPUCQ,
+	PERIPH_ID_LA,
+	PERIPH_ID_TRACECLKIN,
+	PERIPH_ID_SOC_THERM,
+	PERIPH_ID_DTV,
+
+	/* 80 */
+	PERIPH_ID_RESERVED80,
+	PERIPH_ID_I2CSLOW,
+	PERIPH_ID_DSIB,
+	PERIPH_ID_TSEC,
+	PERIPH_ID_RESERVED84,
+	PERIPH_ID_RESERVED85,
+	PERIPH_ID_RESERVED86,
+	PERIPH_ID_EMUCIF,
+
+	/* 88 */
+	PERIPH_ID_RESERVED88,
+	PERIPH_ID_XUSB_HOST,
+	PERIPH_ID_RESERVED90,
+	PERIPH_ID_MSENC,
+	PERIPH_ID_RESERVED92,
+	PERIPH_ID_RESERVED93,
+	PERIPH_ID_RESERVED94,
+	PERIPH_ID_XUSB_DEV,
+
+	PERIPH_ID_VW_FIRST,
+	/* V word: 31:0 */
+	PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST,
+	PERIPH_ID_CPULP,
+	PERIPH_ID_V_RESERVED2,
+	PERIPH_ID_MSELECT,
+	PERIPH_ID_V_RESERVED4,
+	PERIPH_ID_I2S3,
+	PERIPH_ID_I2S4,
+	PERIPH_ID_I2C4,
+
+	/* 104 */
+	PERIPH_ID_SBC5,
+	PERIPH_ID_SBC6,
+	PERIPH_ID_AUDIO,
+	PERIPH_ID_APBIF,
+	PERIPH_ID_DAM0,
+	PERIPH_ID_DAM1,
+	PERIPH_ID_DAM2,
+	PERIPH_ID_HDA2CODEC2X,
+
+	/* 112 */
+	PERIPH_ID_ATOMICS,
+	PERIPH_ID_V_RESERVED17,
+	PERIPH_ID_V_RESERVED18,
+	PERIPH_ID_V_RESERVED19,
+	PERIPH_ID_V_RESERVED20,
+	PERIPH_ID_V_RESERVED21,
+	PERIPH_ID_V_RESERVED22,
+	PERIPH_ID_ACTMON,
+
+	/* 120 */
+	PERIPH_ID_EXTPERIPH1,
+	PERIPH_ID_EXTPERIPH2,
+	PERIPH_ID_EXTPERIPH3,
+	PERIPH_ID_OOB,
+	PERIPH_ID_SATA,
+	PERIPH_ID_HDA,
+	PERIPH_ID_V_RESERVED30,
+	PERIPH_ID_V_RESERVED31,
+
+	/* W word: 31:0 */
+	PERIPH_ID_HDA2HDMICODEC,
+	PERIPH_ID_SATACOLD,
+	PERIPH_ID_W_RESERVED2,
+	PERIPH_ID_W_RESERVED3,
+	PERIPH_ID_W_RESERVED4,
+	PERIPH_ID_W_RESERVED5,
+	PERIPH_ID_W_RESERVED6,
+	PERIPH_ID_W_RESERVED7,
+
+	/* 136 */
+	PERIPH_ID_CEC,
+	PERIPH_ID_W_RESERVED9,
+	PERIPH_ID_W_RESERVED10,
+	PERIPH_ID_W_RESERVED11,
+	PERIPH_ID_W_RESERVED12,
+	PERIPH_ID_W_RESERVED13,
+	PERIPH_ID_XUSB_PADCTL,
+	PERIPH_ID_W_RESERVED15,
+
+	/* 144 */
+	PERIPH_ID_W_RESERVED16,
+	PERIPH_ID_W_RESERVED17,
+	PERIPH_ID_W_RESERVED18,
+	PERIPH_ID_W_RESERVED19,
+	PERIPH_ID_W_RESERVED20,
+	PERIPH_ID_ENTROPY,
+	PERIPH_ID_DDS,
+	PERIPH_ID_W_RESERVED23,
+
+	/* 152 */
+	PERIPH_ID_DP2,
+	PERIPH_ID_AMX0,
+	PERIPH_ID_ADX0,
+	PERIPH_ID_DVFS,
+	PERIPH_ID_XUSB_SS,
+	PERIPH_ID_W_RESERVED29,
+	PERIPH_ID_W_RESERVED30,
+	PERIPH_ID_W_RESERVED31,
+
+	PERIPH_ID_X_FIRST,
+	/* X word: 31:0 */
+	PERIPH_ID_SPARE = PERIPH_ID_X_FIRST,
+	PERIPH_ID_X_RESERVED1,
+	PERIPH_ID_X_RESERVED2,
+	PERIPH_ID_X_RESERVED3,
+	PERIPH_ID_CAM_MCLK,
+	PERIPH_ID_CAM_MCLK2,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_X_RESERVED7,
+
+	/* 168 */
+	PERIPH_ID_X_RESERVED8,
+	PERIPH_ID_X_RESERVED9,
+	PERIPH_ID_X_RESERVED10,
+	PERIPH_ID_VIM2_CLK,
+	PERIPH_ID_X_RESERVED12,
+	PERIPH_ID_X_RESERVED13,
+	PERIPH_ID_EMC_DLL,
+	PERIPH_ID_X_RESERVED15,
+
+	/* 176 */
+	PERIPH_ID_HDMI_AUDIO,
+	PERIPH_ID_CLK72MHZ,
+	PERIPH_ID_VIC,
+	PERIPH_ID_X_RESERVED19,
+	PERIPH_ID_ADX1,
+	PERIPH_ID_DPAUX,
+	PERIPH_ID_SOR0,
+	PERIPH_ID_X_RESERVED23,
+
+	/* 184 */
+	PERIPH_ID_GPU,
+	PERIPH_ID_AMX1,
+	PERIPH_ID_AFC5,
+	PERIPH_ID_AFC4,
+	PERIPH_ID_AFC3,
+	PERIPH_ID_AFC2,
+	PERIPH_ID_AFC1,
+	PERIPH_ID_AFC0,
+
+	PERIPH_ID_COUNT,
+	PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+	PLL_OUT1,
+	PLL_OUT2,
+	PLL_OUT3,
+	PLL_OUT4
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ */
+enum periphc_internal_id {
+	/* 0x00 */
+	PERIPHC_I2S1,
+	PERIPHC_I2S2,
+	PERIPHC_SPDIF_OUT,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_PWM,
+	PERIPHC_05h,
+	PERIPHC_SBC2,
+	PERIPHC_SBC3,
+
+	/* 0x08 */
+	PERIPHC_08h,
+	PERIPHC_I2C1,
+	PERIPHC_I2C5,
+	PERIPHC_0bh,
+	PERIPHC_0ch,
+	PERIPHC_SBC1,
+	PERIPHC_DISP1,
+	PERIPHC_DISP2,
+
+	/* 0x10 */
+	PERIPHC_10h,
+	PERIPHC_11h,
+	PERIPHC_VI,
+	PERIPHC_13h,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC2,
+	PERIPHC_G3D,
+	PERIPHC_G2D,
+
+	/* 0x18 */
+	PERIPHC_18h,
+	PERIPHC_SDMMC4,
+	PERIPHC_VFIR,
+	PERIPHC_1Bh,
+	PERIPHC_1Ch,
+	PERIPHC_HSI,
+	PERIPHC_UART1,
+	PERIPHC_UART2,
+
+	/* 0x20 */
+	PERIPHC_HOST1X,
+	PERIPHC_21h,
+	PERIPHC_22h,
+	PERIPHC_HDMI,
+	PERIPHC_24h,
+	PERIPHC_25h,
+	PERIPHC_I2C2,
+	PERIPHC_EMC,
+
+	/* 0x28 */
+	PERIPHC_UART3,
+	PERIPHC_29h,
+	PERIPHC_VI_SENSOR,
+	PERIPHC_2bh,
+	PERIPHC_2ch,
+	PERIPHC_SBC4,
+	PERIPHC_I2C3,
+	PERIPHC_SDMMC3,
+
+	/* 0x30 */
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_VDE,
+	PERIPHC_OWR,
+	PERIPHC_NOR,
+	PERIPHC_CSITE,
+	PERIPHC_I2S0,
+	PERIPHC_DTV,
+
+	/* 0x38 */
+	PERIPHC_38h,
+	PERIPHC_39h,
+	PERIPHC_3ah,
+	PERIPHC_3bh,
+	PERIPHC_MSENC,
+	PERIPHC_TSEC,
+	PERIPHC_3eh,
+	PERIPHC_OSC,
+
+	PERIPHC_VW_FIRST,
+	/* 0x40 */
+	PERIPHC_40h = PERIPHC_VW_FIRST,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+
+	/* 0x48 */
+	PERIPHC_AUDIO,
+	PERIPHC_49h,
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+	PERIPHC_ACTMON,
+	PERIPHC_EXTPERIPH1,
+
+	/* 0x50 */
+	PERIPHC_EXTPERIPH2,
+	PERIPHC_EXTPERIPH3,
+	PERIPHC_52h,
+	PERIPHC_I2CSLOW,
+	PERIPHC_SYS,
+	PERIPHC_55h,
+	PERIPHC_56h,
+	PERIPHC_57h,
+
+	/* 0x58 */
+	PERIPHC_58h,
+	PERIPHC_SOR,
+	PERIPHC_5ah,
+	PERIPHC_5bh,
+	PERIPHC_SATAOOB,
+	PERIPHC_SATA,
+	PERIPHC_HDA,		/* 0x428 */
+	PERIPHC_5fh,
+
+	PERIPHC_X_FIRST,
+	/* 0x60 */
+	PERIPHC_XUSB_CORE_HOST = PERIPHC_X_FIRST,	/* 0x600 */
+	PERIPHC_XUSB_FALCON,
+	PERIPHC_XUSB_FS,
+	PERIPHC_XUSB_CORE_DEV,
+	PERIPHC_XUSB_SS,
+	PERIPHC_CILAB,
+	PERIPHC_CILCD,
+	PERIPHC_CILE,
+
+	/* 0x68 */
+	PERIPHC_DSIA_LP,
+	PERIPHC_DSIB_LP,
+	PERIPHC_ENTROPY,
+	PERIPHC_DVFS_REF,
+	PERIPHC_DVFS_SOC,
+	PERIPHC_TRACECLKIN,
+	PERIPHC_ADX0,
+	PERIPHC_AMX0,
+
+	/* 0x70 */
+	PERIPHC_EMC_LATENCY,
+	PERIPHC_SOC_THERM,
+	PERIPHC_72h,
+	PERIPHC_73h,
+	PERIPHC_74h,
+	PERIPHC_75h,
+	PERIPHC_VI_SENSOR2,
+	PERIPHC_I2C6,
+
+	/* 0x78 */
+	PERIPHC_78h,
+	PERIPHC_EMC_DLL,
+	PERIPHC_HDMI_AUDIO,
+	PERIPHC_CLK72MHZ,
+	PERIPHC_ADX1,
+	PERIPHC_AMX1,
+	PERIPHC_VIC,
+	PERIPHC_7fh,
+
+	PERIPHC_COUNT,
+
+	PERIPHC_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */
+#define PERIPH_REG(id) \
+	(id < PERIPH_ID_VW_FIRST) ? \
+		((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+		(id) < PERIPH_ID_COUNT)
+
+#endif	/* _TEGRA124_CLOCK_TABLES_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/clock.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/clock.h
new file mode 100644
index 000000000..3f54d3627
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/clock.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra124 clock control definitions */
+
+#ifndef _TEGRA124_CLOCK_H_
+#define _TEGRA124_CLOCK_H_
+
+#include <asm/arch-tegra/clock.h>
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT          28
+#define OSC_FREQ_MASK           (0xF << OSC_FREQ_SHIFT)
+
+/* CLK_RST_CONTROLLER_PLLC_MISC_0 */
+#define PLLC_IDDQ			(1 << 26)
+
+/* CLK_RST_CONTROLLER_CLK_SOURCE_SOR0_0 */
+#define SOR0_CLK_SEL0			(1 << 14)
+#define SOR0_CLK_SEL1			(1 << 15)
+
+int tegra_plle_enable(void);
+
+void clock_sor_enable_edp_clock(void);
+
+/**
+ * clock_set_display_rate() - Set the display clock rate
+ *
+ * @frequency: the requested PLLD frequency
+ *
+ * Return the PLLD frequenc (which may not quite what was requested), or 0
+ * on failure
+ */
+u32 clock_set_display_rate(u32 frequency);
+
+/**
+ * clock_set_up_plldp() - Set up the EDP clock ready for use
+ */
+void clock_set_up_plldp(void);
+
+#endif	/* _TEGRA124_CLOCK_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/display.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/display.h
new file mode 100644
index 000000000..47e0056dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/display.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef __ASM_ARCH_TEGRA_DISPLAY_H
+#define __ASM_ARCH_TEGRA_DISPLAY_H
+
+/**
+ * Register a new display based on device tree configuration.
+ *
+ * The frame buffer can be positioned by U-Boot or overridden by the fdt.
+ * You should pass in the U-Boot address here, and check the contents of
+ * struct fdt_disp_config to see what was actually chosen.
+ *
+ * @param blob			Device tree blob
+ * @param default_lcd_base	Default address of LCD frame buffer
+ * @return 0 if ok, -1 on error (unsupported bits per pixel)
+ */
+int tegra_display_probe(const void *blob, void *default_lcd_base);
+
+/**
+ * Return the current display configuration
+ *
+ * @return pointer to display configuration, or NULL if there is no valid
+ * config
+ */
+struct fdt_disp_config *tegra_display_get_config(void);
+
+/**
+ * Perform the next stage of the LCD init if it is time to do so.
+ *
+ * LCD init can be time-consuming because of the number of delays we need
+ * while waiting for the backlight power supply, etc. This function can
+ * be called at various times during U-Boot operation to advance the
+ * initialization of the LCD to the next stage if sufficient time has
+ * passed since the last stage. It keeps track of what stage it is up to
+ * and the time that it is permitted to move to the next stage.
+ *
+ * The final call should have wait=1 to complete the init.
+ *
+ * @param blob	fdt blob containing LCD information
+ * @param wait	1 to wait until all init is complete, and then return
+ *		0 to return immediately, potentially doing nothing if it is
+ *		not yet time for the next init.
+ */
+int tegra_lcd_check_next_stage(const void *blob, int wait);
+
+/**
+ * Set up the maximum LCD size so we can size the frame buffer.
+ *
+ * @param blob	fdt blob containing LCD information
+ */
+void tegra_lcd_early_init(const void *blob);
+
+#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/flow.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/flow.h
new file mode 100644
index 000000000..ebcb22f1c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/flow.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA124_FLOW_H_
+#define _TEGRA124_FLOW_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct flow_ctlr {
+	u32 halt_cpu_events;	/* offset 0x00 */
+	u32 halt_cop_events;	/* offset 0x04 */
+	u32 cpu_csr;		/* offset 0x08 */
+	u32 cop_csr;		/* offset 0x0c */
+	u32 xrq_events;		/* offset 0x10 */
+	u32 halt_cpu1_events;	/* offset 0x14 */
+	u32 cpu1_csr;		/* offset 0x18 */
+	u32 halt_cpu2_events;	/* offset 0x1c */
+	u32 cpu2_csr;		/* offset 0x20 */
+	u32 halt_cpu3_events;	/* offset 0x24 */
+	u32 cpu3_csr;		/* offset 0x28 */
+	u32 cluster_control;	/* offset 0x2c */
+	u32 halt_cop1_events;	/* offset 0x30 */
+	u32 halt_cop1_csr;	/* offset 0x34 */
+	u32 cpu_pwr_csr;	/* offset 0x38 */
+	u32 mpid;		/* offset 0x3c */
+	u32 ram_repair;		/* offset 0x40 */
+	u32 flow_dbg_sel;	/* offset 0x44 */
+	u32 flow_dbg_cnt0;	/* offset 0x48 */
+	u32 flow_dbg_cnt1;	/* offset 0x4c */
+	u32 flow_dbg_qual;	/* offset 0x50 */
+	u32 flow_ctrl_spare;	/* offset 0x54 */
+	u32 ram_repair_cluster1;/* offset 0x58 */
+};
+
+/* HALT_COP_EVENTS_0, 0x04 */
+#define EVENT_MSEC		(1 << 24)
+#define EVENT_USEC		(1 << 25)
+#define EVENT_JTAG		(1 << 28)
+#define EVENT_MODE_STOP		(2 << 29)
+
+/* FLOW_CTLR_CLUSTER_CONTROL_0 0x2c */
+#define ACTIVE_LP		(1 << 0)
+
+/* CPUn_CSR_0 */
+#define CSR_ENABLE		(1 << 0)
+#define CSR_IMMEDIATE_WAKE	(1 << 3)
+#define CSR_WAIT_WFI_SHIFT	8
+#define CSR_PWR_OFF_STS		(1 << 16)
+
+#define RAM_REPAIR_REQ		BIT(0)
+#define RAM_REPAIR_STS		BIT(1)
+#define RAM_REPAIR_BYPASS_EN	BIT(2)
+
+#endif	/*  _TEGRA124_FLOW_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/funcmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/funcmux.h
new file mode 100644
index 000000000..8d4501e7d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/funcmux.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra124 high-level function multiplexing */
+
+#ifndef _TEGRA124_FUNCMUX_H_
+#define _TEGRA124_FUNCMUX_H_
+
+#include <asm/arch-tegra/funcmux.h>
+
+/* Configs supported by the func mux */
+enum {
+	FUNCMUX_DEFAULT = 0,	/* default config */
+
+	/* UART configs */
+	FUNCMUX_UART1_KBC = 0,
+	FUNCMUX_UART4_GPIO = 0,
+};
+#endif	/* _TEGRA124_FUNCMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/gp_padctrl.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/gp_padctrl.h
new file mode 100644
index 000000000..750a2dc64
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/gp_padctrl.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA124_GP_PADCTRL_H_
+#define _TEGRA124_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+	u32	modereg;	/* 0x00: APB_MISC_GP_MODEREG */
+	u32	hidrev;		/* 0x04: APB_MISC_GP_HIDREV */
+	u32	reserved0[22];	/* 0x08 - 0x5C: */
+	u32	emu_revid;	/* 0x60: APB_MISC_GP_EMU_REVID */
+	u32	xactor_scratch;	/* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+	u32	aocfg1;		/* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+	u32	aocfg2;		/* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */
+	u32	atcfg1;		/* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+	u32	atcfg2;		/* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+	u32	atcfg3;		/* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
+	u32	atcfg4;		/* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */
+	u32	atcfg5;		/* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
+	u32	cdev1cfg;	/* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
+	u32	cdev2cfg;	/* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
+	u32	reserved1;	/* 0x8C: */
+	u32	dap1cfg;	/* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
+	u32	dap2cfg;	/* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
+	u32	dap3cfg;	/* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
+	u32	dap4cfg;	/* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
+	u32	dbgcfg;		/* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
+	u32	reserved2[3];	/* 0xA4 - 0xAC: */
+	u32	sdio3cfg;	/* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
+	u32	spicfg;		/* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
+	u32	uaacfg;		/* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
+	u32	uabcfg;		/* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
+	u32	uart2cfg;	/* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
+	u32	uart3cfg;	/* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
+	u32	reserved3[9];	/* 0xC8-0xE8: */
+	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+	u32	reserved4[3];	/* 0xF0-0xF8: */
+	u32	ddccfg;		/* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */
+	u32	gmacfg;		/* 0x100: APB_MISC_GP_GMACFGPADCTRL */
+	u32	reserved5[3];	/* 0x104-0x10C: */
+	u32	gmecfg;		/* 0x110: APB_MISC_GP_GMECFGPADCTRL */
+	u32	gmfcfg;		/* 0x114: APB_MISC_GP_GMFCFGPADCTRL */
+	u32	gmgcfg;		/* 0x118: APB_MISC_GP_GMGCFGPADCTRL */
+	u32	gmhcfg;		/* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */
+	u32	owrcfg;		/* 0x120: APB_MISC_GP_OWRCFGPADCTRL */
+	u32	uadcfg;		/* 0x124: APB_MISC_GP_UADCFGPADCTRL */
+	u32	reserved6;	/* 0x128: */
+	u32	dev3cfg;	/* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */
+	u32	reserved7[2];	/* 0x130 - 0x134: */
+	u32	ceccfg;		/* 0x138: APB_MISC_GP_CECCFGPADCTRL */
+	u32	reserved8[22];	/* 0x13C - 0x190: */
+	u32	atcfg6;		/* 0x194: APB_MISC_GP_ATCFG6PADCTRL */
+	u32	dap5cfg;	/* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */
+	u32	vbuscfg;	/* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */
+	u32	aocfg3;		/* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */
+	u32	hvccfg0;	/* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */
+	u32	sdio4cfg;	/* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */
+	u32	aocfg0;		/* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */
+};
+
+/* SDMMC1/3 settings from section 27.5 of T114 TRM */
+#define SDIOCFG_DRVUP_SLWF	0
+#define SDIOCFG_DRVDN_SLWR	0
+#define SDIOCFG_DRVUP		0x24
+#define SDIOCFG_DRVDN		0x14
+
+#endif	/* _TEGRA124_GP_PADCTRL_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/gpio.h
new file mode 100644
index 000000000..e5ea2815a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/gpio.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA124_GPIO_H_
+#define _TEGRA124_GPIO_H_
+
+/*
+ * The Tegra124 GPIO controller has 256 GPIOS in 8 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS	4	/* number of ports per bank */
+#define TEGRA_GPIO_BANKS	8	/* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+	uint gpio_config[TEGRA_GPIO_PORTS];
+	uint gpio_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_out[TEGRA_GPIO_PORTS];
+	uint gpio_in[TEGRA_GPIO_PORTS];
+	uint gpio_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_int_clear[TEGRA_GPIO_PORTS];
+	uint gpio_masked_config[TEGRA_GPIO_PORTS];
+	uint gpio_masked_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_in[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+	struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+#endif	/* _TEGRA124_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/mc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/mc.h
new file mode 100644
index 000000000..617e55af2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/mc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA124_MC_H_
+#define _TEGRA124_MC_H_
+
+/**
+ * Defines the memory controller registers we need/care about
+ */
+struct mc_ctlr {
+	u32 reserved0[4];			/* offset 0x00 - 0x0C */
+	u32 mc_smmu_config;			/* offset 0x10 */
+	u32 mc_smmu_tlb_config;			/* offset 0x14 */
+	u32 mc_smmu_ptc_config;			/* offset 0x18 */
+	u32 mc_smmu_ptb_asid;			/* offset 0x1C */
+	u32 mc_smmu_ptb_data;			/* offset 0x20 */
+	u32 reserved1[3];			/* offset 0x24 - 0x2C */
+	u32 mc_smmu_tlb_flush;			/* offset 0x30 */
+	u32 mc_smmu_ptc_flush;			/* offset 0x34 */
+	u32 reserved2[6];			/* offset 0x38 - 0x4C */
+	u32 mc_emem_cfg;			/* offset 0x50 */
+	u32 mc_emem_adr_cfg;			/* offset 0x54 */
+	u32 mc_emem_adr_cfg_dev0;		/* offset 0x58 */
+	u32 mc_emem_adr_cfg_dev1;		/* offset 0x5C */
+	u32 reserved3[4];			/* offset 0x60 - 0x6C */
+	u32 mc_security_cfg0;			/* offset 0x70 */
+	u32 mc_security_cfg1;			/* offset 0x74 */
+	u32 reserved4[6];			/* offset 0x7C - 0x8C */
+	u32 mc_emem_arb_reserved[28];		/* offset 0x90 - 0xFC */
+	u32 reserved5[74];			/* offset 0x100 - 0x224 */
+	u32 mc_smmu_translation_enable_0;	/* offset 0x228 */
+	u32 mc_smmu_translation_enable_1;	/* offset 0x22C */
+	u32 mc_smmu_translation_enable_2;	/* offset 0x230 */
+	u32 mc_smmu_translation_enable_3;	/* offset 0x234 */
+	u32 mc_smmu_afi_asid;			/* offset 0x238 */
+	u32 mc_smmu_avpc_asid;			/* offset 0x23C */
+	u32 mc_smmu_dc_asid;			/* offset 0x240 */
+	u32 mc_smmu_dcb_asid;			/* offset 0x244 */
+	u32 reserved6[2];                       /* offset 0x248 - 0x24C */
+	u32 mc_smmu_hc_asid;			/* offset 0x250 */
+	u32 mc_smmu_hda_asid;			/* offset 0x254 */
+	u32 mc_smmu_isp2_asid;			/* offset 0x258 */
+	u32 reserved7[2];                       /* offset 0x25C - 0x260 */
+	u32 mc_smmu_msenc_asid;			/* offset 0x264 */
+	u32 mc_smmu_nv_asid;			/* offset 0x268 */
+	u32 mc_smmu_nv2_asid;			/* offset 0x26C */
+	u32 mc_smmu_ppcs_asid;			/* offset 0x270 */
+	u32 mc_smmu_sata_asid;			/* offset 0x274 */
+	u32 reserved8[1];                       /* offset 0x278 */
+	u32 mc_smmu_vde_asid;			/* offset 0x27C */
+	u32 mc_smmu_vi_asid;			/* offset 0x280 */
+	u32 mc_smmu_vic_asid;			/* offset 0x284 */
+	u32 mc_smmu_xusb_host_asid;		/* offset 0x288 */
+	u32 mc_smmu_xusb_dev_asid;		/* offset 0x28C */
+	u32 reserved9[1];                       /* offset 0x290 */
+	u32 mc_smmu_tsec_asid;			/* offset 0x294 */
+	u32 mc_smmu_ppcs1_asid;			/* offset 0x298 */
+	u32 reserved10[235];			/* offset 0x29C - 0x644 */
+	u32 mc_video_protect_bom;		/* offset 0x648 */
+	u32 mc_video_protect_size_mb;		/* offset 0x64c */
+	u32 mc_video_protect_reg_ctrl;		/* offset 0x650 */
+};
+
+#define TEGRA_MC_SMMU_CONFIG_ENABLE (1 << 0)
+
+#define TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_ENABLED		(0 << 0)
+#define TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_DISABLED	(1 << 0)
+
+#endif	/* _TEGRA124_MC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/pinmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/pinmux.h
new file mode 100644
index 000000000..4c593aae7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/pinmux.h
@@ -0,0 +1,359 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef _TEGRA124_PINMUX_H_
+#define _TEGRA124_PINMUX_H_
+
+enum pmux_pingrp {
+	PMUX_PINGRP_ULPI_DATA0_PO1,
+	PMUX_PINGRP_ULPI_DATA1_PO2,
+	PMUX_PINGRP_ULPI_DATA2_PO3,
+	PMUX_PINGRP_ULPI_DATA3_PO4,
+	PMUX_PINGRP_ULPI_DATA4_PO5,
+	PMUX_PINGRP_ULPI_DATA5_PO6,
+	PMUX_PINGRP_ULPI_DATA6_PO7,
+	PMUX_PINGRP_ULPI_DATA7_PO0,
+	PMUX_PINGRP_ULPI_CLK_PY0,
+	PMUX_PINGRP_ULPI_DIR_PY1,
+	PMUX_PINGRP_ULPI_NXT_PY2,
+	PMUX_PINGRP_ULPI_STP_PY3,
+	PMUX_PINGRP_DAP3_FS_PP0,
+	PMUX_PINGRP_DAP3_DIN_PP1,
+	PMUX_PINGRP_DAP3_DOUT_PP2,
+	PMUX_PINGRP_DAP3_SCLK_PP3,
+	PMUX_PINGRP_PV0,
+	PMUX_PINGRP_PV1,
+	PMUX_PINGRP_SDMMC1_CLK_PZ0,
+	PMUX_PINGRP_SDMMC1_CMD_PZ1,
+	PMUX_PINGRP_SDMMC1_DAT3_PY4,
+	PMUX_PINGRP_SDMMC1_DAT2_PY5,
+	PMUX_PINGRP_SDMMC1_DAT1_PY6,
+	PMUX_PINGRP_SDMMC1_DAT0_PY7,
+	PMUX_PINGRP_CLK2_OUT_PW5 = (0x68 / 4),
+	PMUX_PINGRP_CLK2_REQ_PCC5,
+	PMUX_PINGRP_HDMI_INT_PN7 = (0x110 / 4),
+	PMUX_PINGRP_DDC_SCL_PV4,
+	PMUX_PINGRP_DDC_SDA_PV5,
+	PMUX_PINGRP_UART2_RXD_PC3 = (0x164 / 4),
+	PMUX_PINGRP_UART2_TXD_PC2,
+	PMUX_PINGRP_UART2_RTS_N_PJ6,
+	PMUX_PINGRP_UART2_CTS_N_PJ5,
+	PMUX_PINGRP_UART3_TXD_PW6,
+	PMUX_PINGRP_UART3_RXD_PW7,
+	PMUX_PINGRP_UART3_CTS_N_PA1,
+	PMUX_PINGRP_UART3_RTS_N_PC0,
+	PMUX_PINGRP_PU0,
+	PMUX_PINGRP_PU1,
+	PMUX_PINGRP_PU2,
+	PMUX_PINGRP_PU3,
+	PMUX_PINGRP_PU4,
+	PMUX_PINGRP_PU5,
+	PMUX_PINGRP_PU6,
+	PMUX_PINGRP_GEN1_I2C_SDA_PC5,
+	PMUX_PINGRP_GEN1_I2C_SCL_PC4,
+	PMUX_PINGRP_DAP4_FS_PP4,
+	PMUX_PINGRP_DAP4_DIN_PP5,
+	PMUX_PINGRP_DAP4_DOUT_PP6,
+	PMUX_PINGRP_DAP4_SCLK_PP7,
+	PMUX_PINGRP_CLK3_OUT_PEE0,
+	PMUX_PINGRP_CLK3_REQ_PEE1,
+	PMUX_PINGRP_PC7,
+	PMUX_PINGRP_PI5,
+	PMUX_PINGRP_PI7,
+	PMUX_PINGRP_PK0,
+	PMUX_PINGRP_PK1,
+	PMUX_PINGRP_PJ0,
+	PMUX_PINGRP_PJ2,
+	PMUX_PINGRP_PK3,
+	PMUX_PINGRP_PK4,
+	PMUX_PINGRP_PK2,
+	PMUX_PINGRP_PI3,
+	PMUX_PINGRP_PI6,
+	PMUX_PINGRP_PG0,
+	PMUX_PINGRP_PG1,
+	PMUX_PINGRP_PG2,
+	PMUX_PINGRP_PG3,
+	PMUX_PINGRP_PG4,
+	PMUX_PINGRP_PG5,
+	PMUX_PINGRP_PG6,
+	PMUX_PINGRP_PG7,
+	PMUX_PINGRP_PH0,
+	PMUX_PINGRP_PH1,
+	PMUX_PINGRP_PH2,
+	PMUX_PINGRP_PH3,
+	PMUX_PINGRP_PH4,
+	PMUX_PINGRP_PH5,
+	PMUX_PINGRP_PH6,
+	PMUX_PINGRP_PH7,
+	PMUX_PINGRP_PJ7,
+	PMUX_PINGRP_PB0,
+	PMUX_PINGRP_PB1,
+	PMUX_PINGRP_PK7,
+	PMUX_PINGRP_PI0,
+	PMUX_PINGRP_PI1,
+	PMUX_PINGRP_PI2,
+	PMUX_PINGRP_PI4,
+	PMUX_PINGRP_GEN2_I2C_SCL_PT5,
+	PMUX_PINGRP_GEN2_I2C_SDA_PT6,
+	PMUX_PINGRP_SDMMC4_CLK_PCC4,
+	PMUX_PINGRP_SDMMC4_CMD_PT7,
+	PMUX_PINGRP_SDMMC4_DAT0_PAA0,
+	PMUX_PINGRP_SDMMC4_DAT1_PAA1,
+	PMUX_PINGRP_SDMMC4_DAT2_PAA2,
+	PMUX_PINGRP_SDMMC4_DAT3_PAA3,
+	PMUX_PINGRP_SDMMC4_DAT4_PAA4,
+	PMUX_PINGRP_SDMMC4_DAT5_PAA5,
+	PMUX_PINGRP_SDMMC4_DAT6_PAA6,
+	PMUX_PINGRP_SDMMC4_DAT7_PAA7,
+	PMUX_PINGRP_CAM_MCLK_PCC0 = (0x284 / 4),
+	PMUX_PINGRP_PCC1,
+	PMUX_PINGRP_PBB0,
+	PMUX_PINGRP_CAM_I2C_SCL_PBB1,
+	PMUX_PINGRP_CAM_I2C_SDA_PBB2,
+	PMUX_PINGRP_PBB3,
+	PMUX_PINGRP_PBB4,
+	PMUX_PINGRP_PBB5,
+	PMUX_PINGRP_PBB6,
+	PMUX_PINGRP_PBB7,
+	PMUX_PINGRP_PCC2,
+	PMUX_PINGRP_JTAG_RTCK,
+	PMUX_PINGRP_PWR_I2C_SCL_PZ6,
+	PMUX_PINGRP_PWR_I2C_SDA_PZ7,
+	PMUX_PINGRP_KB_ROW0_PR0,
+	PMUX_PINGRP_KB_ROW1_PR1,
+	PMUX_PINGRP_KB_ROW2_PR2,
+	PMUX_PINGRP_KB_ROW3_PR3,
+	PMUX_PINGRP_KB_ROW4_PR4,
+	PMUX_PINGRP_KB_ROW5_PR5,
+	PMUX_PINGRP_KB_ROW6_PR6,
+	PMUX_PINGRP_KB_ROW7_PR7,
+	PMUX_PINGRP_KB_ROW8_PS0,
+	PMUX_PINGRP_KB_ROW9_PS1,
+	PMUX_PINGRP_KB_ROW10_PS2,
+	PMUX_PINGRP_KB_ROW11_PS3,
+	PMUX_PINGRP_KB_ROW12_PS4,
+	PMUX_PINGRP_KB_ROW13_PS5,
+	PMUX_PINGRP_KB_ROW14_PS6,
+	PMUX_PINGRP_KB_ROW15_PS7,
+	PMUX_PINGRP_KB_COL0_PQ0,
+	PMUX_PINGRP_KB_COL1_PQ1,
+	PMUX_PINGRP_KB_COL2_PQ2,
+	PMUX_PINGRP_KB_COL3_PQ3,
+	PMUX_PINGRP_KB_COL4_PQ4,
+	PMUX_PINGRP_KB_COL5_PQ5,
+	PMUX_PINGRP_KB_COL6_PQ6,
+	PMUX_PINGRP_KB_COL7_PQ7,
+	PMUX_PINGRP_CLK_32K_OUT_PA0,
+	PMUX_PINGRP_CORE_PWR_REQ = (0x324 / 4),
+	PMUX_PINGRP_CPU_PWR_REQ,
+	PMUX_PINGRP_PWR_INT_N,
+	PMUX_PINGRP_CLK_32K_IN,
+	PMUX_PINGRP_OWR,
+	PMUX_PINGRP_DAP1_FS_PN0,
+	PMUX_PINGRP_DAP1_DIN_PN1,
+	PMUX_PINGRP_DAP1_DOUT_PN2,
+	PMUX_PINGRP_DAP1_SCLK_PN3,
+	PMUX_PINGRP_DAP_MCLK1_REQ_PEE2,
+	PMUX_PINGRP_DAP_MCLK1_PW4,
+	PMUX_PINGRP_SPDIF_IN_PK6,
+	PMUX_PINGRP_SPDIF_OUT_PK5,
+	PMUX_PINGRP_DAP2_FS_PA2,
+	PMUX_PINGRP_DAP2_DIN_PA4,
+	PMUX_PINGRP_DAP2_DOUT_PA5,
+	PMUX_PINGRP_DAP2_SCLK_PA3,
+	PMUX_PINGRP_DVFS_PWM_PX0,
+	PMUX_PINGRP_GPIO_X1_AUD_PX1,
+	PMUX_PINGRP_GPIO_X3_AUD_PX3,
+	PMUX_PINGRP_DVFS_CLK_PX2,
+	PMUX_PINGRP_GPIO_X4_AUD_PX4,
+	PMUX_PINGRP_GPIO_X5_AUD_PX5,
+	PMUX_PINGRP_GPIO_X6_AUD_PX6,
+	PMUX_PINGRP_GPIO_X7_AUD_PX7,
+	PMUX_PINGRP_SDMMC3_CLK_PA6 = (0x390 / 4),
+	PMUX_PINGRP_SDMMC3_CMD_PA7,
+	PMUX_PINGRP_SDMMC3_DAT0_PB7,
+	PMUX_PINGRP_SDMMC3_DAT1_PB6,
+	PMUX_PINGRP_SDMMC3_DAT2_PB5,
+	PMUX_PINGRP_SDMMC3_DAT3_PB4,
+	PMUX_PINGRP_PEX_L0_RST_N_PDD1 = (0x3bc / 4),
+	PMUX_PINGRP_PEX_L0_CLKREQ_N_PDD2,
+	PMUX_PINGRP_PEX_WAKE_N_PDD3,
+	PMUX_PINGRP_PEX_L1_RST_N_PDD5 = (0x3cc / 4),
+	PMUX_PINGRP_PEX_L1_CLKREQ_N_PDD6,
+	PMUX_PINGRP_HDMI_CEC_PEE3 = (0x3e0 / 4),
+	PMUX_PINGRP_SDMMC1_WP_N_PV3,
+	PMUX_PINGRP_SDMMC3_CD_N_PV2,
+	PMUX_PINGRP_GPIO_W2_AUD_PW2,
+	PMUX_PINGRP_GPIO_W3_AUD_PW3,
+	PMUX_PINGRP_USB_VBUS_EN0_PN4,
+	PMUX_PINGRP_USB_VBUS_EN1_PN5,
+	PMUX_PINGRP_SDMMC3_CLK_LB_IN_PEE5,
+	PMUX_PINGRP_SDMMC3_CLK_LB_OUT_PEE4,
+	PMUX_PINGRP_GMI_CLK_LB,
+	PMUX_PINGRP_RESET_OUT_N,
+	PMUX_PINGRP_KB_ROW16_PT0,
+	PMUX_PINGRP_KB_ROW17_PT1,
+	PMUX_PINGRP_USB_VBUS_EN2_PFF1,
+	PMUX_PINGRP_PFF2,
+	PMUX_PINGRP_DP_HPD_PFF0 = (0x430 / 4),
+	PMUX_PINGRP_COUNT,
+};
+
+enum pmux_drvgrp {
+	PMUX_DRVGRP_AO1,
+	PMUX_DRVGRP_AO2,
+	PMUX_DRVGRP_AT1,
+	PMUX_DRVGRP_AT2,
+	PMUX_DRVGRP_AT3,
+	PMUX_DRVGRP_AT4,
+	PMUX_DRVGRP_AT5,
+	PMUX_DRVGRP_CDEV1,
+	PMUX_DRVGRP_CDEV2,
+	PMUX_DRVGRP_DAP1 = (0x28 / 4),
+	PMUX_DRVGRP_DAP2,
+	PMUX_DRVGRP_DAP3,
+	PMUX_DRVGRP_DAP4,
+	PMUX_DRVGRP_DBG,
+	PMUX_DRVGRP_SDIO3 = (0x48 / 4),
+	PMUX_DRVGRP_SPI,
+	PMUX_DRVGRP_UAA,
+	PMUX_DRVGRP_UAB,
+	PMUX_DRVGRP_UART2,
+	PMUX_DRVGRP_UART3,
+	PMUX_DRVGRP_SDIO1 = (0x84 / 4),
+	PMUX_DRVGRP_DDC = (0x94 / 4),
+	PMUX_DRVGRP_GMA,
+	PMUX_DRVGRP_GME = (0xa8 / 4),
+	PMUX_DRVGRP_GMF,
+	PMUX_DRVGRP_GMG,
+	PMUX_DRVGRP_GMH,
+	PMUX_DRVGRP_OWR,
+	PMUX_DRVGRP_UDA,
+	PMUX_DRVGRP_GPV,
+	PMUX_DRVGRP_DEV3,
+	PMUX_DRVGRP_CEC = (0xd0 / 4),
+	PMUX_DRVGRP_AT6 = (0x12c / 4),
+	PMUX_DRVGRP_DAP5,
+	PMUX_DRVGRP_USB_VBUS_EN,
+	PMUX_DRVGRP_AO3 = (0x140 / 4),
+	PMUX_DRVGRP_AO0 = (0x148 / 4),
+	PMUX_DRVGRP_HV0,
+	PMUX_DRVGRP_SDIO4 = (0x15c / 4),
+	PMUX_DRVGRP_AO4,
+	PMUX_DRVGRP_COUNT,
+};
+
+enum pmux_mipipadctrlgrp {
+	PMUX_MIPIPADCTRLGRP_DSI_B,
+	PMUX_MIPIPADCTRLGRP_COUNT,
+};
+
+enum pmux_func {
+	PMUX_FUNC_DEFAULT,
+	PMUX_FUNC_BLINK,
+	PMUX_FUNC_CCLA,
+	PMUX_FUNC_CEC,
+	PMUX_FUNC_CLDVFS,
+	PMUX_FUNC_CLK,
+	PMUX_FUNC_CLK12,
+	PMUX_FUNC_CPU,
+	PMUX_FUNC_CSI,
+	PMUX_FUNC_DAP,
+	PMUX_FUNC_DAP1,
+	PMUX_FUNC_DAP2,
+	PMUX_FUNC_DEV3,
+	PMUX_FUNC_DISPLAYA,
+	PMUX_FUNC_DISPLAYA_ALT,
+	PMUX_FUNC_DISPLAYB,
+	PMUX_FUNC_DP,
+	PMUX_FUNC_DSI_B,
+	PMUX_FUNC_DTV,
+	PMUX_FUNC_EXTPERIPH1,
+	PMUX_FUNC_EXTPERIPH2,
+	PMUX_FUNC_EXTPERIPH3,
+	PMUX_FUNC_GMI,
+	PMUX_FUNC_GMI_ALT,
+	PMUX_FUNC_HDA,
+	PMUX_FUNC_HSI,
+	PMUX_FUNC_I2C1,
+	PMUX_FUNC_I2C2,
+	PMUX_FUNC_I2C3,
+	PMUX_FUNC_I2C4,
+	PMUX_FUNC_I2CPWR,
+	PMUX_FUNC_I2S0,
+	PMUX_FUNC_I2S1,
+	PMUX_FUNC_I2S2,
+	PMUX_FUNC_I2S3,
+	PMUX_FUNC_I2S4,
+	PMUX_FUNC_IRDA,
+	PMUX_FUNC_KBC,
+	PMUX_FUNC_OWR,
+	PMUX_FUNC_PE,
+	PMUX_FUNC_PE0,
+	PMUX_FUNC_PE1,
+	PMUX_FUNC_PMI,
+	PMUX_FUNC_PWM0,
+	PMUX_FUNC_PWM1,
+	PMUX_FUNC_PWM2,
+	PMUX_FUNC_PWM3,
+	PMUX_FUNC_PWRON,
+	PMUX_FUNC_RESET_OUT_N,
+	PMUX_FUNC_RTCK,
+	PMUX_FUNC_SATA,
+	PMUX_FUNC_SDMMC1,
+	PMUX_FUNC_SDMMC2,
+	PMUX_FUNC_SDMMC3,
+	PMUX_FUNC_SDMMC4,
+	PMUX_FUNC_SOC,
+	PMUX_FUNC_SPDIF,
+	PMUX_FUNC_SPI1,
+	PMUX_FUNC_SPI2,
+	PMUX_FUNC_SPI3,
+	PMUX_FUNC_SPI4,
+	PMUX_FUNC_SPI5,
+	PMUX_FUNC_SPI6,
+	PMUX_FUNC_SYS,
+	PMUX_FUNC_TMDS,
+	PMUX_FUNC_TRACE,
+	PMUX_FUNC_UARTA,
+	PMUX_FUNC_UARTB,
+	PMUX_FUNC_UARTC,
+	PMUX_FUNC_UARTD,
+	PMUX_FUNC_ULPI,
+	PMUX_FUNC_USB,
+	PMUX_FUNC_VGP1,
+	PMUX_FUNC_VGP2,
+	PMUX_FUNC_VGP3,
+	PMUX_FUNC_VGP4,
+	PMUX_FUNC_VGP5,
+	PMUX_FUNC_VGP6,
+	PMUX_FUNC_VI,
+	PMUX_FUNC_VI_ALT1,
+	PMUX_FUNC_VI_ALT3,
+	PMUX_FUNC_VIMCLK2,
+	PMUX_FUNC_VIMCLK2_ALT,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_RSVD4,
+	PMUX_FUNC_COUNT,
+};
+
+#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x868
+#define TEGRA_PMX_SOC_MIPIPADCTRL_BASE_REG 0x820
+#define TEGRA_PMX_SOC_HAS_IO_CLAMPING
+#define TEGRA_PMX_SOC_HAS_DRVGRPS
+#define TEGRA_PMX_SOC_HAS_MIPI_PAD_CTRL_GRPS
+#define TEGRA_PMX_GRPS_HAVE_LPMD
+#define TEGRA_PMX_GRPS_HAVE_SCHMT
+#define TEGRA_PMX_GRPS_HAVE_HSM
+#define TEGRA_PMX_PINS_HAVE_E_INPUT
+#define TEGRA_PMX_PINS_HAVE_LOCK
+#define TEGRA_PMX_PINS_HAVE_OD
+#define TEGRA_PMX_PINS_HAVE_IO_RESET
+#define TEGRA_PMX_PINS_HAVE_RCV_SEL
+#include <asm/arch-tegra/pinmux.h>
+
+#endif /* _TEGRA124_PINMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/powergate.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/powergate.h
new file mode 100644
index 000000000..8a0cfbaf9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/powergate.h
@@ -0,0 +1,6 @@
+#ifndef _TEGRA124_POWERGATE_H_
+#define _TEGRA124_POWERGATE_H_
+
+#include <asm/arch-tegra/powergate.h>
+
+#endif /* _TEGRA124_POWERGATE_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/pwm.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/pwm.h
new file mode 100644
index 000000000..9ab23e8f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/pwm.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Tegra pulse width frequency modulator definitions
+ *
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+#ifndef __ASM_ARCH_TEGRA124_PWM_H
+#define __ASM_ARCH_TEGRA124_PWM_H
+
+#include <asm/arch-tegra/pwm.h>
+
+#endif	/* __ASM_ARCH_TEGRA124_PWM_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/sysctr.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/sysctr.h
new file mode 100644
index 000000000..6567104d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/sysctr.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA124_SYSCTR_H_
+#define _TEGRA124_SYSCTR_H_
+
+struct sysctr_ctlr {
+	u32 cntcr;		/* 0x00: SYSCTR0_CNTCR Counter Control */
+	u32 cntsr;		/* 0x04: SYSCTR0_CNTSR Counter Status */
+	u32 cntcv0;		/* 0x08: SYSCTR0_CNTCV0 Counter Count 31:00 */
+	u32 cntcv1;		/* 0x0C: SYSCTR0_CNTCV1 Counter Count 63:32 */
+	u32 reserved1[4];	/* 0x10 - 0x1C */
+	u32 cntfid0;		/* 0x20: SYSCTR0_CNTFID0 Freq Table Entry */
+	u32 cntfid1;		/* 0x24: SYSCTR0_CNTFID1 Freq Table End */
+	u32 reserved2[1002];	/* 0x28 - 0xFCC */
+	u32 counterid[12];	/* 0xFD0 - 0xFxx CounterID regs, RO */
+};
+
+#define TSC_CNTCR_ENABLE	(1 << 0)	/* Enable */
+#define TSC_CNTCR_HDBG		(1 << 1)	/* Halt on debug */
+
+#endif	/* _TEGRA124_SYSCTR_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra124/tegra.h b/roms/u-boot/arch/arm/include/asm/arch-tegra124/tegra.h
new file mode 100644
index 000000000..34070b863
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra124/tegra.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA124_H_
+#define _TEGRA124_H_
+
+#define NV_PA_SDRAM_BASE	0x80000000
+#define NV_PA_TSC_BASE		0x700F0000	/* System Counter TSC regs */
+#define NV_PA_MC_BASE		0x70019000	/* Mem Ctlr regs (MCB, etc.) */
+#define NV_PA_AHB_BASE		0x6000C000	/* System regs (AHB, etc.) */
+
+#include <asm/arch-tegra/tegra.h>
+
+#define BCT_ODMDATA_OFFSET	1704	/* offset to ODMDATA word */
+
+#undef NVBOOTINFOTABLE_BCTSIZE
+#undef NVBOOTINFOTABLE_BCTPTR
+#define NVBOOTINFOTABLE_BCTSIZE	0x48	/* BCT size in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTPTR	0x4C	/* BCT pointer in BIT in IRAM */
+
+#define MAX_NUM_CPU		4
+#define MCB_EMEM_ARB_OVERRIDE	(NV_PA_MC_BASE + 0xE8)
+
+#define TEGRA_USB1_BASE		0x7D000000
+
+#endif /* _TEGRA124_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra186/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-tegra186/gpio.h
new file mode 100644
index 000000000..8b7e40975
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra186/gpio.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ */
+
+#ifndef _TEGRA186_GPIO_H_
+#define _TEGRA186_GPIO_H_
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra186/tegra.h b/roms/u-boot/arch/arm/include/asm/arch-tegra186/tegra.h
new file mode 100644
index 000000000..d86cedbab
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra186/tegra.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2013-2016, NVIDIA CORPORATION.
+ */
+
+#ifndef _TEGRA186_TEGRA_H_
+#define _TEGRA186_TEGRA_H_
+
+#define GICD_BASE		0x03881000	/* Generic Int Cntrlr Distrib */
+#define GICC_BASE		0x03882000	/* Generic Int Cntrlr CPU I/F */
+#define NV_PA_SDRAM_BASE	0x80000000
+
+#include <asm/arch-tegra/tegra.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/clock-tables.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/clock-tables.h
new file mode 100644
index 000000000..861b3d5d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/clock-tables.h
@@ -0,0 +1,185 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2010-2012 NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra20 clock PLL tables */
+
+#ifndef _CLOCK_TABLES_H_
+#define _CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+	CLOCK_ID_FIRST,
+	CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+	CLOCK_ID_MEMORY,
+	CLOCK_ID_PERIPH,
+	CLOCK_ID_AUDIO,
+	CLOCK_ID_USB,
+	CLOCK_ID_DISPLAY,
+
+	/* now the simple ones */
+	CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_EPCI,
+	CLOCK_ID_SFROM32KHZ,
+
+	/* These are the base clocks (inputs to the Tegra SOC) */
+	CLOCK_ID_32KHZ,
+	CLOCK_ID_OSC,
+	CLOCK_ID_CLK_M,
+
+	CLOCK_ID_COUNT,	/* number of clocks */
+	CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+	PERIPH_ID_FIRST,
+
+	/* Low word: 31:0 */
+	PERIPH_ID_CPU = PERIPH_ID_FIRST,
+	PERIPH_ID_RESERVED1,
+	PERIPH_ID_RESERVED2,
+	PERIPH_ID_AC97,
+	PERIPH_ID_RTC,
+	PERIPH_ID_TMR,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+
+	/* 8 */
+	PERIPH_ID_GPIO,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SPDIF,
+	PERIPH_ID_I2S1,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_NDFLASH,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC4,
+
+	/* 16 */
+	PERIPH_ID_TWC,
+	PERIPH_ID_PWM,
+	PERIPH_ID_I2S2,
+	PERIPH_ID_EPP,
+	PERIPH_ID_VI,
+	PERIPH_ID_2D,
+	PERIPH_ID_USBD,
+	PERIPH_ID_ISP,
+
+	/* 24 */
+	PERIPH_ID_3D,
+	PERIPH_ID_IDE,
+	PERIPH_ID_DISP2,
+	PERIPH_ID_DISP1,
+	PERIPH_ID_HOST1X,
+	PERIPH_ID_VCP,
+	PERIPH_ID_RESERVED30,
+	PERIPH_ID_CACHE2,
+
+	/* Middle word: 63:32 */
+	PERIPH_ID_MEM,
+	PERIPH_ID_AHBDMA,
+	PERIPH_ID_APBDMA,
+	PERIPH_ID_RESERVED35,
+	PERIPH_ID_KBC,
+	PERIPH_ID_STAT_MON,
+	PERIPH_ID_PMC,
+	PERIPH_ID_FUSE,
+
+	/* 40 */
+	PERIPH_ID_KFUSE,
+	PERIPH_ID_SBC1,
+	PERIPH_ID_SNOR,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SBC2,
+	PERIPH_ID_XIO,
+	PERIPH_ID_SBC3,
+	PERIPH_ID_DVC_I2C,
+
+	/* 48 */
+	PERIPH_ID_DSI,
+	PERIPH_ID_TVO,
+	PERIPH_ID_MIPI,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_CSI,
+	PERIPH_ID_TVDAC,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_UART3,
+
+	/* 56 */
+	PERIPH_ID_RESERVED56,
+	PERIPH_ID_EMC,
+	PERIPH_ID_USB2,
+	PERIPH_ID_USB3,
+	PERIPH_ID_MPE,
+	PERIPH_ID_VDE,
+	PERIPH_ID_BSEA,
+	PERIPH_ID_BSEV,
+
+	/* Upper word 95:64 */
+	PERIPH_ID_SPEEDO,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_SBC4,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_PCIE,
+	PERIPH_ID_OWR,
+
+	/* 72 */
+	PERIPH_ID_AFI,
+	PERIPH_ID_CORESIGHT,
+	PERIPH_ID_PCIEXCLK,
+	PERIPH_ID_AVPUCQ,
+	PERIPH_ID_RESERVED76,
+	PERIPH_ID_RESERVED77,
+	PERIPH_ID_RESERVED78,
+	PERIPH_ID_RESERVED79,
+
+	/* 80 */
+	PERIPH_ID_RESERVED80,
+	PERIPH_ID_RESERVED81,
+	PERIPH_ID_RESERVED82,
+	PERIPH_ID_RESERVED83,
+	PERIPH_ID_IRAMA,
+	PERIPH_ID_IRAMB,
+	PERIPH_ID_IRAMC,
+	PERIPH_ID_IRAMD,
+
+	/* 88 */
+	PERIPH_ID_CRAM2,
+	PERIPH_ID_SYNC_CLK_DOUBLER,
+	PERIPH_ID_CLK_M_DOUBLER,
+	PERIPH_ID_RESERVED91,
+	PERIPH_ID_SUS_OUT,
+	PERIPH_ID_DEV2_OUT,
+	PERIPH_ID_DEV1_OUT,
+
+	PERIPH_ID_COUNT,
+	PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+	PLL_OUT1,
+	PLL_OUT2,
+	PLL_OUT3,
+	PLL_OUT4
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U */
+#define PERIPH_REG(id) ((id) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range, and not a simple PLL */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && \
+		(id) < CLOCK_ID_FIRST_SIMPLE)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+		(id) < PERIPH_ID_COUNT)
+
+#endif	/* _CLOCK_TABLES_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/clock.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/clock.h
new file mode 100644
index 000000000..8158b8344
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/clock.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+/* Tegra20 clock control functions */
+
+#ifndef _TEGRA20_CLOCK_H
+#define _TEGRA20_CLOCK_H
+
+#include <asm/arch-tegra/clock.h>
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT          30
+#define OSC_FREQ_MASK           (3U << OSC_FREQ_SHIFT)
+
+int tegra_plle_enable(void);
+
+#endif	/* _TEGRA20_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/display.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/display.h
new file mode 100644
index 000000000..e7b3cffd4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/display.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef __ASM_ARCH_TEGRA_DISPLAY_H
+#define __ASM_ARCH_TEGRA_DISPLAY_H
+
+#include <asm/arch-tegra/dc.h>
+
+/* This holds information about a window which can be displayed */
+struct disp_ctl_win {
+	enum win_color_depth_id fmt;	/* Color depth/format */
+	unsigned	bpp;		/* Bits per pixel */
+	phys_addr_t	phys_addr;	/* Physical address in memory */
+	unsigned	x;		/* Horizontal address offset (bytes) */
+	unsigned	y;		/* Veritical address offset (bytes) */
+	unsigned	w;		/* Width of source window */
+	unsigned	h;		/* Height of source window */
+	unsigned	stride;		/* Number of bytes per line */
+	unsigned	out_x;		/* Left edge of output window (col) */
+	unsigned	out_y;		/* Top edge of output window (row) */
+	unsigned	out_w;		/* Width of output window in pixels */
+	unsigned	out_h;		/* Height of output window in pixels */
+};
+
+#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/emc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/emc.h
new file mode 100644
index 000000000..58ee08c9f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/emc.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _ARCH_EMC_H_
+#define _ARCH_EMC_H_
+
+#include <asm/types.h>
+
+#define TEGRA_EMC_NUM_REGS	46
+
+/* EMC Registers */
+struct emc_ctlr {
+	u32 cfg;		/* 0x00: EMC_CFG */
+	u32 reserved0[3];	/* 0x04 ~ 0x0C */
+	u32 adr_cfg;		/* 0x10: EMC_ADR_CFG */
+	u32 adr_cfg1;		/* 0x14: EMC_ADR_CFG_1 */
+	u32 reserved1[2];	/* 0x18 ~ 0x18 */
+	u32 refresh_ctrl;	/* 0x20: EMC_REFCTRL */
+	u32 pin;		/* 0x24: EMC_PIN */
+	u32 timing_ctrl;	/* 0x28: EMC_TIMING_CONTROL */
+	u32 rc;			/* 0x2C: EMC_RC */
+	u32 rfc;		/* 0x30: EMC_RFC */
+	u32 ras;		/* 0x34: EMC_RAS */
+	u32 rp;			/* 0x38: EMC_RP */
+	u32 r2w;		/* 0x3C: EMC_R2W */
+	u32 w2r;		/* 0x40: EMC_W2R */
+	u32 r2p;		/* 0x44: EMC_R2P */
+	u32 w2p;		/* 0x48: EMC_W2P */
+	u32 rd_rcd;		/* 0x4C: EMC_RD_RCD */
+	u32 wd_rcd;		/* 0x50: EMC_WD_RCD */
+	u32 rrd;		/* 0x54: EMC_RRD */
+	u32 rext;		/* 0x58: EMC_REXT */
+	u32 wdv;		/* 0x5C: EMC_WDV */
+	u32 quse;		/* 0x60: EMC_QUSE */
+	u32 qrst;		/* 0x64: EMC_QRST */
+	u32 qsafe;		/* 0x68: EMC_QSAFE */
+	u32 rdv;		/* 0x6C: EMC_RDV */
+	u32 refresh;		/* 0x70: EMC_REFRESH */
+	u32 burst_refresh_num;	/* 0x74: EMC_BURST_REFRESH_NUM */
+	u32 pdex2wr;		/* 0x78: EMC_PDEX2WR */
+	u32 pdex2rd;		/* 0x7c: EMC_PDEX2RD */
+	u32 pchg2pden;		/* 0x80: EMC_PCHG2PDEN */
+	u32 act2pden;		/* 0x84: EMC_ACT2PDEN */
+	u32 ar2pden;		/* 0x88: EMC_AR2PDEN */
+	u32 rw2pden;		/* 0x8C: EMC_RW2PDEN */
+	u32 txsr;		/* 0x90: EMC_TXSR */
+	u32 tcke;		/* 0x94: EMC_TCKE */
+	u32 tfaw;		/* 0x98: EMC_TFAW */
+	u32 trpab;		/* 0x9C: EMC_TRPAB */
+	u32 tclkstable;		/* 0xA0: EMC_TCLKSTABLE */
+	u32 tclkstop;		/* 0xA4: EMC_TCLKSTOP */
+	u32 trefbw;		/* 0xA8: EMC_TREFBW */
+	u32 quse_extra;		/* 0xAC: EMC_QUSE_EXTRA */
+	u32 odt_write;		/* 0xB0: EMC_ODT_WRITE */
+	u32 odt_read;		/* 0xB4: EMC_ODT_READ */
+	u32 reserved2[5];	/* 0xB8 ~ 0xC8 */
+	u32 mrs;		/* 0xCC: EMC_MRS */
+	u32 emrs;		/* 0xD0: EMC_EMRS */
+	u32 ref;		/* 0xD4: EMC_REF */
+	u32 pre;		/* 0xD8: EMC_PRE */
+	u32 nop;		/* 0xDC: EMC_NOP */
+	u32 self_ref;		/* 0xE0: EMC_SELF_REF */
+	u32 dpd;		/* 0xE4: EMC_DPD */
+	u32 mrw;		/* 0xE8: EMC_MRW */
+	u32 mrr;		/* 0xEC: EMC_MRR */
+	u32 reserved3;		/* 0xF0: */
+	u32 fbio_cfg1;		/* 0xF4: EMC_FBIO_CFG1 */
+	u32 fbio_dqsib_dly;	/* 0xF8: EMC_FBIO_DQSIB_DLY */
+	u32 fbio_dqsib_dly_msb;	/* 0xFC: EMC_FBIO_DQSIB_DLY_MSG */
+	u32 fbio_spare;		/* 0x100: SBIO_SPARE */
+				/* There are more registers ... */
+};
+
+/**
+ * Set up the EMC for the given rate. The timing parameters are retrieved
+ * from the device tree "nvidia,tegra20-emc" node and its
+ * "nvidia,tegra20-emc-table" sub-nodes.
+ *
+ * @param blob	Device tree blob
+ * @param rate	Clock speed of memory controller in Hz (=2x memory bus rate)
+ * @return 0 if ok, else -ve error code (look in emc.c to decode it)
+ */
+int tegra_set_emc(const void *blob, unsigned rate);
+
+/**
+ * Get a pointer to the EMC controller from the device tree.
+ *
+ * @param blob	Device tree blob
+ * @return pointer to EMC controller
+ */
+struct emc_ctlr *emc_get_controller(const void *blob);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/flow.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/flow.h
new file mode 100644
index 000000000..33be841dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/flow.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _FLOW_H_
+#define _FLOW_H_
+
+struct flow_ctlr {
+	u32	halt_cpu_events;
+	u32	halt_cop_events;
+	u32	cpu_csr;
+	u32	cop_csr;
+	u32	halt_cpu1_events;
+	u32	cpu1_csr;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/funcmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/funcmux.h
new file mode 100644
index 000000000..e9e96c1f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/funcmux.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+/* Tegra20 high-level function multiplexing */
+
+#ifndef _TEGRA20_FUNCMUX_H_
+#define _TEGRA20_FUNCMUX_H_
+
+#include <asm/arch-tegra/funcmux.h>
+
+/* Configs supported by the func mux */
+enum {
+	FUNCMUX_DEFAULT = 0,	/* default config */
+
+	/* UART configs */
+	FUNCMUX_UART1_IRRX_IRTX = 0,
+	FUNCMUX_UART1_UAA_UAB,
+	FUNCMUX_UART1_GPU,
+	FUNCMUX_UART1_SDIO1,
+	FUNCMUX_UART2_UAD = 0,
+	FUNCMUX_UART4_GMC = 0,
+
+	/* I2C configs */
+	FUNCMUX_DVC_I2CP = 0,
+	FUNCMUX_I2C1_RM = 0,
+	FUNCMUX_I2C2_DDC = 0,
+	FUNCMUX_I2C2_PTA,
+	FUNCMUX_I2C3_DTF = 0,
+
+	/* SDMMC configs */
+	FUNCMUX_SDMMC1_SDIO1_4BIT = 0,
+	FUNCMUX_SDMMC2_DTA_DTD_8BIT = 0,
+	FUNCMUX_SDMMC3_SDB_4BIT = 0,
+	FUNCMUX_SDMMC3_SDB_SLXA_8BIT,
+	FUNCMUX_SDMMC4_ATC_ATD_8BIT = 0,
+	FUNCMUX_SDMMC4_ATB_GMA_4_BIT,
+	FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT,
+
+	/* USB configs */
+	FUNCMUX_USB2_ULPI = 0,
+
+	/* Serial Flash configs */
+	FUNCMUX_SPI1_GMC_GMD = 0,
+
+	/* NAND flags */
+	FUNCMUX_NDFLASH_ATC = 0,
+	FUNCMUX_NDFLASH_KBC_8_BIT,
+};
+#endif	/* _TEGRA20_FUNCMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/gp_padctrl.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/gp_padctrl.h
new file mode 100644
index 000000000..dd2ee1265
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/gp_padctrl.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA20_GP_PADCTRL_H_
+#define _TEGRA20_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+	u32	modereg;	/* 0x00: APB_MISC_GP_MODEREG */
+	u32	hidrev;		/* 0x04: APB_MISC_GP_HIDREV */
+	u32	reserved0[22];	/* 0x08 - 0x5C: */
+	u32	emu_revid;	/* 0x60: APB_MISC_GP_EMU_REVID */
+	u32	xactor_scratch;	/* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+	u32	aocfg1;		/* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+	u32	aocfg2;		/* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
+	u32	atcfg1;		/* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+	u32	atcfg2;		/* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+	u32	cdevcfg1;	/* 0x78: APB_MISC_GP_CDEV1CFGPADCTRL */
+	u32	cdevcfg2;	/* 0x7C: APB_MISC_GP_CDEV2CFGPADCTRL */
+	u32	csuscfg;	/* 0x80: APB_MISC_GP_CSUSCFGPADCTRL */
+	u32	dap1cfg;	/* 0x84: APB_MISC_GP_DAP1CFGPADCTRL */
+	u32	dap2cfg;	/* 0x88: APB_MISC_GP_DAP2CFGPADCTRL */
+	u32	dap3cfg;	/* 0x8C: APB_MISC_GP_DAP3CFGPADCTRL */
+	u32	dap4cfg;	/* 0x90: APB_MISC_GP_DAP4CFGPADCTRL */
+	u32	dbgcfg;		/* 0x94: APB_MISC_GP_DBGCFGPADCTRL */
+	u32	lcdcfg1;	/* 0x98: APB_MISC_GP_LCDCFG1PADCTRL */
+	u32	lcdcfg2;	/* 0x9C: APB_MISC_GP_LCDCFG2PADCTRL */
+	u32	sdmmc2_cfg;	/* 0xA0: APB_MISC_GP_SDMMC2CFGPADCTRL */
+	u32	sdmmc3_cfg;	/* 0xA4: APB_MISC_GP_SDMMC3CFGPADCTRL */
+	u32	spicfg;		/* 0xA8: APB_MISC_GP_SPICFGPADCTRL */
+	u32	uaacfg;		/* 0xAC: APB_MISC_GP_UAACFGPADCTRL */
+	u32	uabcfg;		/* 0xB0: APB_MISC_GP_UABCFGPADCTRL */
+	u32	uart2cfg;	/* 0xB4: APB_MISC_GP_UART2CFGPADCTRL */
+	u32	uart3cfg;	/* 0xB8: APB_MISC_GP_UART3CFGPADCTRL */
+	u32	vicfg1;		/* 0xBC: APB_MISC_GP_VICFG1PADCTRL */
+	u32	vicfg2;		/* 0xC0: APB_MISC_GP_VICFG2PADCTRL */
+	u32	xm2cfga;	/* 0xC4: APB_MISC_GP_XM2CFGAPADCTRL */
+	u32	xm2cfgc;	/* 0xC8: APB_MISC_GP_XM2CFGCPADCTRL */
+	u32	xm2cfgd;	/* 0xCC: APB_MISC_GP_XM2CFGDPADCTRL */
+	u32	xm2clkcfg;	/* 0xD0: APB_MISC_GP_XM2CLKCFGPADCTRL */
+	u32	memcomp;	/* 0xD4: APB_MISC_GP_MEMCOMPPADCTRL */
+};
+
+#endif	/* _TEGRA20_GP_PADCTRL_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/gpio.h
new file mode 100644
index 000000000..6818c2872
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/gpio.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011, Google Inc. All rights reserved.
+ * Portions Copyright 2011-2012 NVIDIA Corporation
+ */
+
+#ifndef _TEGRA20_GPIO_H_
+#define _TEGRA20_GPIO_H_
+
+/*
+ * The Tegra 2x GPIO controller has 224 GPIOs arranged in 7 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS	4	/* number of ports per bank */
+#define TEGRA_GPIO_BANKS	7	/* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+	uint gpio_config[TEGRA_GPIO_PORTS];
+	uint gpio_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_out[TEGRA_GPIO_PORTS];
+	uint gpio_in[TEGRA_GPIO_PORTS];
+	uint gpio_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+	struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+#endif	/* TEGRA20_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/mc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/mc.h
new file mode 100644
index 000000000..71283e4e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/mc.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2014
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA20_MC_H_
+#define _TEGRA20_MC_H_
+
+/**
+ * Defines the memory controller registers we need/care about
+ */
+struct mc_ctlr {
+	u32 reserved0[3];			/* offset 0x00 - 0x08 */
+	u32 mc_emem_cfg;			/* offset 0x0C */
+	u32 mc_emem_adr_cfg;			/* offset 0x10 */
+	u32 mc_emem_arb_cfg0;			/* offset 0x14 */
+	u32 mc_emem_arb_cfg1;			/* offset 0x18 */
+	u32 mc_emem_arb_cfg2;			/* offset 0x1C */
+	u32 reserved1;				/* offset 0x20 */
+	u32 mc_gart_cfg;			/* offset 0x24 */
+	u32 mc_gart_entry_addr;			/* offset 0x28 */
+	u32 mc_gart_entry_data;			/* offset 0x2C */
+	u32 mc_gart_error_req;			/* offset 0x30 */
+	u32 mc_gart_error_addr;			/* offset 0x34 */
+	u32 reserved2;				/* offset 0x38 */
+	u32 mc_timeout_ctrl;			/* offset 0x3C */
+	u32 reserved3[6];			/* offset 0x40 - 0x54 */
+	u32 mc_decerr_emem_others_status;	/* offset 0x58 */
+	u32 mc_decerr_emem_others_adr;		/* offset 0x5C */
+	u32 reserved4[40];			/* offset 0x60 - 0xFC */
+	u32 reserved5[93];			/* offset 0x100 - 0x270 */
+};
+
+#endif	/* _TEGRA20_MC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/pinmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/pinmux.h
new file mode 100644
index 000000000..e9e3801e6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/pinmux.h
@@ -0,0 +1,238 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA20_PINMUX_H_
+#define _TEGRA20_PINMUX_H_
+
+/*
+ * Pin groups which we adjust. There are three basic attributes of each pin
+ * group which use this enum:
+ *
+ *	- function
+ *	- pullup / pulldown
+ *	- tristate or normal
+ */
+enum pmux_pingrp {
+	/* APB_MISC_PP_TRISTATE_REG_A_0 */
+	PMUX_PINGRP_ATA,
+	PMUX_PINGRP_ATB,
+	PMUX_PINGRP_ATC,
+	PMUX_PINGRP_ATD,
+	PMUX_PINGRP_CDEV1,
+	PMUX_PINGRP_CDEV2,
+	PMUX_PINGRP_CSUS,
+	PMUX_PINGRP_DAP1,
+
+	PMUX_PINGRP_DAP2,
+	PMUX_PINGRP_DAP3,
+	PMUX_PINGRP_DAP4,
+	PMUX_PINGRP_DTA,
+	PMUX_PINGRP_DTB,
+	PMUX_PINGRP_DTC,
+	PMUX_PINGRP_DTD,
+	PMUX_PINGRP_DTE,
+
+	PMUX_PINGRP_GPU,
+	PMUX_PINGRP_GPV,
+	PMUX_PINGRP_I2CP,
+	PMUX_PINGRP_IRTX,
+	PMUX_PINGRP_IRRX,
+	PMUX_PINGRP_KBCB,
+	PMUX_PINGRP_KBCA,
+	PMUX_PINGRP_PMC,
+
+	PMUX_PINGRP_PTA,
+	PMUX_PINGRP_RM,
+	PMUX_PINGRP_KBCE,
+	PMUX_PINGRP_KBCF,
+	PMUX_PINGRP_GMA,
+	PMUX_PINGRP_GMC,
+	PMUX_PINGRP_SDIO1,
+	PMUX_PINGRP_OWC,
+
+	/* 32: APB_MISC_PP_TRISTATE_REG_B_0 */
+	PMUX_PINGRP_GME,
+	PMUX_PINGRP_SDC,
+	PMUX_PINGRP_SDD,
+	PMUX_PINGRP_RESERVED0,
+	PMUX_PINGRP_SLXA,
+	PMUX_PINGRP_SLXC,
+	PMUX_PINGRP_SLXD,
+	PMUX_PINGRP_SLXK,
+
+	PMUX_PINGRP_SPDI,
+	PMUX_PINGRP_SPDO,
+	PMUX_PINGRP_SPIA,
+	PMUX_PINGRP_SPIB,
+	PMUX_PINGRP_SPIC,
+	PMUX_PINGRP_SPID,
+	PMUX_PINGRP_SPIE,
+	PMUX_PINGRP_SPIF,
+
+	PMUX_PINGRP_SPIG,
+	PMUX_PINGRP_SPIH,
+	PMUX_PINGRP_UAA,
+	PMUX_PINGRP_UAB,
+	PMUX_PINGRP_UAC,
+	PMUX_PINGRP_UAD,
+	PMUX_PINGRP_UCA,
+	PMUX_PINGRP_UCB,
+
+	PMUX_PINGRP_RESERVED1,
+	PMUX_PINGRP_ATE,
+	PMUX_PINGRP_KBCC,
+	PMUX_PINGRP_RESERVED2,
+	PMUX_PINGRP_RESERVED3,
+	PMUX_PINGRP_GMB,
+	PMUX_PINGRP_GMD,
+	PMUX_PINGRP_DDC,
+
+	/* 64: APB_MISC_PP_TRISTATE_REG_C_0 */
+	PMUX_PINGRP_LD0,
+	PMUX_PINGRP_LD1,
+	PMUX_PINGRP_LD2,
+	PMUX_PINGRP_LD3,
+	PMUX_PINGRP_LD4,
+	PMUX_PINGRP_LD5,
+	PMUX_PINGRP_LD6,
+	PMUX_PINGRP_LD7,
+
+	PMUX_PINGRP_LD8,
+	PMUX_PINGRP_LD9,
+	PMUX_PINGRP_LD10,
+	PMUX_PINGRP_LD11,
+	PMUX_PINGRP_LD12,
+	PMUX_PINGRP_LD13,
+	PMUX_PINGRP_LD14,
+	PMUX_PINGRP_LD15,
+
+	PMUX_PINGRP_LD16,
+	PMUX_PINGRP_LD17,
+	PMUX_PINGRP_LHP0,
+	PMUX_PINGRP_LHP1,
+	PMUX_PINGRP_LHP2,
+	PMUX_PINGRP_LVP0,
+	PMUX_PINGRP_LVP1,
+	PMUX_PINGRP_HDINT,
+
+	PMUX_PINGRP_LM0,
+	PMUX_PINGRP_LM1,
+	PMUX_PINGRP_LVS,
+	PMUX_PINGRP_LSC0,
+	PMUX_PINGRP_LSC1,
+	PMUX_PINGRP_LSCK,
+	PMUX_PINGRP_LDC,
+	PMUX_PINGRP_LCSN,
+
+	/* 96: APB_MISC_PP_TRISTATE_REG_D_0 */
+	PMUX_PINGRP_LSPI,
+	PMUX_PINGRP_LSDA,
+	PMUX_PINGRP_LSDI,
+	PMUX_PINGRP_LPW0,
+	PMUX_PINGRP_LPW1,
+	PMUX_PINGRP_LPW2,
+	PMUX_PINGRP_LDI,
+	PMUX_PINGRP_LHS,
+
+	PMUX_PINGRP_LPP,
+	PMUX_PINGRP_RESERVED4,
+	PMUX_PINGRP_KBCD,
+	PMUX_PINGRP_GPU7,
+	PMUX_PINGRP_DTF,
+	PMUX_PINGRP_UDA,
+	PMUX_PINGRP_CRTP,
+	PMUX_PINGRP_SDB,
+
+	/* these pin groups only have pullup and pull down control */
+	PMUX_PINGRP_CK32,
+	PMUX_PINGRP_DDRC,
+	PMUX_PINGRP_PMCA,
+	PMUX_PINGRP_PMCB,
+	PMUX_PINGRP_PMCC,
+	PMUX_PINGRP_PMCD,
+	PMUX_PINGRP_PMCE,
+	PMUX_PINGRP_XM2C,
+	PMUX_PINGRP_XM2D,
+	PMUX_PINGRP_COUNT,
+};
+
+/*
+ * Functions which can be assigned to each of the pin groups. The values here
+ * bear no relation to the values programmed into pinmux registers and are
+ * purely a convenience. The translation is done through a table search.
+ */
+enum pmux_func {
+	PMUX_FUNC_DEFAULT,
+	PMUX_FUNC_AHB_CLK,
+	PMUX_FUNC_APB_CLK,
+	PMUX_FUNC_AUDIO_SYNC,
+	PMUX_FUNC_CRT,
+	PMUX_FUNC_DAP1,
+	PMUX_FUNC_DAP2,
+	PMUX_FUNC_DAP3,
+	PMUX_FUNC_DAP4,
+	PMUX_FUNC_DAP5,
+	PMUX_FUNC_DISPA,
+	PMUX_FUNC_DISPB,
+	PMUX_FUNC_EMC_TEST0_DLL,
+	PMUX_FUNC_EMC_TEST1_DLL,
+	PMUX_FUNC_GMI,
+	PMUX_FUNC_GMI_INT,
+	PMUX_FUNC_HDMI,
+	PMUX_FUNC_I2C,
+	PMUX_FUNC_I2C2,
+	PMUX_FUNC_I2C3,
+	PMUX_FUNC_IDE,
+	PMUX_FUNC_KBC,
+	PMUX_FUNC_MIO,
+	PMUX_FUNC_MIPI_HS,
+	PMUX_FUNC_NAND,
+	PMUX_FUNC_OSC,
+	PMUX_FUNC_OWR,
+	PMUX_FUNC_PCIE,
+	PMUX_FUNC_PLLA_OUT,
+	PMUX_FUNC_PLLC_OUT1,
+	PMUX_FUNC_PLLM_OUT1,
+	PMUX_FUNC_PLLP_OUT2,
+	PMUX_FUNC_PLLP_OUT3,
+	PMUX_FUNC_PLLP_OUT4,
+	PMUX_FUNC_PWM,
+	PMUX_FUNC_PWR_INTR,
+	PMUX_FUNC_PWR_ON,
+	PMUX_FUNC_RTCK,
+	PMUX_FUNC_SDIO1,
+	PMUX_FUNC_SDIO2,
+	PMUX_FUNC_SDIO3,
+	PMUX_FUNC_SDIO4,
+	PMUX_FUNC_SFLASH,
+	PMUX_FUNC_SPDIF,
+	PMUX_FUNC_SPI1,
+	PMUX_FUNC_SPI2,
+	PMUX_FUNC_SPI2_ALT,
+	PMUX_FUNC_SPI3,
+	PMUX_FUNC_SPI4,
+	PMUX_FUNC_TRACE,
+	PMUX_FUNC_TWC,
+	PMUX_FUNC_UARTA,
+	PMUX_FUNC_UARTB,
+	PMUX_FUNC_UARTC,
+	PMUX_FUNC_UARTD,
+	PMUX_FUNC_UARTE,
+	PMUX_FUNC_ULPI,
+	PMUX_FUNC_VI,
+	PMUX_FUNC_VI_SENSOR_CLK,
+	PMUX_FUNC_XIO,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_RSVD4,
+	PMUX_FUNC_COUNT,
+};
+
+#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x868
+#include <asm/arch-tegra/pinmux.h>
+
+#endif /* _TEGRA20_PINMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/powergate.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/powergate.h
new file mode 100644
index 000000000..439d88b70
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/powergate.h
@@ -0,0 +1,6 @@
+#ifndef _TEGRA20_POWERGATE_H_
+#define _TEGRA20_POWERGATE_H_
+
+#include <asm/arch-tegra/powergate.h>
+
+#endif /* _TEGRA20_POWERGATE_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/pwm.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/pwm.h
new file mode 100644
index 000000000..9467617b5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/pwm.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Tegra pulse width frequency modulator definitions
+ *
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+#ifndef __ASM_ARCH_TEGRA20_PWM_H
+#define __ASM_ARCH_TEGRA20_PWM_H
+
+#include <asm/arch-tegra/pwm.h>
+
+#endif	/* __ASM_ARCH_TEGRA20_PWM_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/sdram_param.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/sdram_param.h
new file mode 100644
index 000000000..3d1405fa3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/sdram_param.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2010, 2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _SDRAM_PARAM_H_
+#define _SDRAM_PARAM_H_
+
+/*
+ * Defines the number of 32-bit words provided in each set of SDRAM parameters
+ * for arbitration configuration data.
+ */
+#define BCT_SDRAM_ARB_CONFIG_WORDS 27
+
+enum memory_type {
+	MEMORY_TYPE_NONE = 0,
+	MEMORY_TYPE_DDR,
+	MEMORY_TYPE_LPDDR,
+	MEMORY_TYPE_DDR2,
+	MEMORY_TYPE_LPDDR2,
+	MEMORY_TYPE_NUM,
+	MEMORY_TYPE_FORCE32 = 0x7FFFFFFF
+};
+
+/* Defines the SDRAM parameter structure */
+struct sdram_params {
+	enum memory_type memory_type;
+	u32 pllm_charge_pump_setup_control;
+	u32 pllm_loop_filter_setup_control;
+	u32 pllm_input_divider;
+	u32 pllm_feedback_divider;
+	u32 pllm_post_divider;
+	u32 pllm_stable_time;
+	u32 emc_clock_divider;
+	u32 emc_auto_cal_interval;
+	u32 emc_auto_cal_config;
+	u32 emc_auto_cal_wait;
+	u32 emc_pin_program_wait;
+	u32 emc_rc;
+	u32 emc_rfc;
+	u32 emc_ras;
+	u32 emc_rp;
+	u32 emc_r2w;
+	u32 emc_w2r;
+	u32 emc_r2p;
+	u32 emc_w2p;
+	u32 emc_rd_rcd;
+	u32 emc_wr_rcd;
+	u32 emc_rrd;
+	u32 emc_rext;
+	u32 emc_wdv;
+	u32 emc_quse;
+	u32 emc_qrst;
+	u32 emc_qsafe;
+	u32 emc_rdv;
+	u32 emc_refresh;
+	u32 emc_burst_refresh_num;
+	u32 emc_pdex2wr;
+	u32 emc_pdex2rd;
+	u32 emc_pchg2pden;
+	u32 emc_act2pden;
+	u32 emc_ar2pden;
+	u32 emc_rw2pden;
+	u32 emc_txsr;
+	u32 emc_tcke;
+	u32 emc_tfaw;
+	u32 emc_trpab;
+	u32 emc_tclkstable;
+	u32 emc_tclkstop;
+	u32 emc_trefbw;
+	u32 emc_quseextra;
+	u32 emc_fbioc_fg1;
+	u32 emc_fbio_dqsib_dly;
+	u32 emc_fbio_dqsib_dly_msb;
+	u32 emc_fbio_quse_dly;
+	u32 emc_fbio_quse_dly_msb;
+	u32 emc_fbio_cfg5;
+	u32 emc_fbio_cfg6;
+	u32 emc_fbio_spare;
+	u32 emc_mrs;
+	u32 emc_emrs;
+	u32 emc_mrw1;
+	u32 emc_mrw2;
+	u32 emc_mrw3;
+	u32 emc_mrw_reset_command;
+	u32 emc_mrw_reset_init_wait;
+	u32 emc_adr_cfg;
+	u32 emc_adr_cfg1;
+	u32 emc_emem_cfg;
+	u32 emc_low_latency_config;
+	u32 emc_cfg;
+	u32 emc_cfg2;
+	u32 emc_dbg;
+	u32 ahb_arbitration_xbar_ctrl;
+	u32 emc_cfg_dig_dll;
+	u32 emc_dll_xform_dqs;
+	u32 emc_dll_xform_quse;
+	u32 warm_boot_wait;
+	u32 emc_ctt_term_ctrl;
+	u32 emc_odt_write;
+	u32 emc_odt_read;
+	u32 emc_zcal_ref_cnt;
+	u32 emc_zcal_wait_cnt;
+	u32 emc_zcal_mrw_cmd;
+	u32 emc_mrs_reset_dll;
+	u32 emc_mrw_zq_init_dev0;
+	u32 emc_mrw_zq_init_dev1;
+	u32 emc_mrw_zq_init_wait;
+	u32 emc_mrs_reset_dll_wait;
+	u32 emc_emrs_emr2;
+	u32 emc_emrs_emr3;
+	u32 emc_emrs_ddr2_dll_enable;
+	u32 emc_mrs_ddr2_dll_reset;
+	u32 emc_emrs_ddr2_ocd_calib;
+	u32 emc_edr2_wait;
+	u32 emc_cfg_clktrim0;
+	u32 emc_cfg_clktrim1;
+	u32 emc_cfg_clktrim2;
+	u32 pmc_ddr_pwr;
+	u32 apb_misc_gp_xm2cfga_padctrl;
+	u32 apb_misc_gp_xm2cfgc_padctrl;
+	u32 apb_misc_gp_xm2cfgc_padctrl2;
+	u32 apb_misc_gp_xm2cfgd_padctrl;
+	u32 apb_misc_gp_xm2cfgd_padctrl2;
+	u32 apb_misc_gp_xm2clkcfg_padctrl;
+	u32 apb_misc_gp_xm2comp_padctrl;
+	u32 apb_misc_gp_xm2vttgen_padctrl;
+	u32 arbitration_config[BCT_SDRAM_ARB_CONFIG_WORDS];
+};
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra20/tegra.h b/roms/u-boot/arch/arm/include/asm/arch-tegra20/tegra.h
new file mode 100644
index 000000000..3fecbcdb6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra20/tegra.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA20_H_
+#define _TEGRA20_H_
+
+#define NV_PA_SDRAM_BASE	0x00000000
+#define NV_PA_MC_BASE		0x7000F000
+
+#include <asm/arch-tegra/tegra.h>
+
+#define TEGRA_USB1_BASE		0xC5000000
+
+#define BCT_ODMDATA_OFFSET	4068	/* 12 bytes from end of BCT */
+
+#define MAX_NUM_CPU		2
+
+#endif	/* TEGRA20_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/ahb.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/ahb.h
new file mode 100644
index 000000000..8ecd6d9ba
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/ahb.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA210_AHB_H_
+#define _TEGRA210_AHB_H_
+
+struct ahb_ctlr {
+	u32 reserved0;			/* 00h */
+	u32 arbitration_disable;	/* _ARBITRATION_DISABLE_0,	04h */
+	u32 arbitration_priority_ctrl;	/* _ARBITRATION_PRIORITY_CTRL_0,08h */
+	u32 arbitration_usr_protect;	/* _ARBITRATION_USR_PROTECT_0,	0ch */
+	u32 gizmo_ahb_mem;		/* _GIZMO_AHB_MEM_0,		10h */
+	u32 gizmo_apb_dma;		/* _GIZMO_APB_DMA_0,		14h */
+	u32 reserved6[2];		/* 18h, 1ch */
+	u32 gizmo_usb;			/* _GIZMO_USB_0,		20h */
+	u32 gizmo_ahb_xbar_bridge;	/* _GIZMO_AHB_XBAR_BRIDGE_0,	24h */
+	u32 gizmo_cpu_ahb_bridge;	/* _GIZMO_CPU_AHB_BRIDGE_0,	28h */
+	u32 gizmo_cop_ahb_bridge;	/* _GIZMO_COP_AHB_BRIDGE_0,	2ch */
+	u32 gizmo_xbar_apb_ctlr;	/* _GIZMO_XBAR_APB_CTLR_0,	30h */
+	u32 gizmo_vcp_ahb_bridge;	/* _GIZMO_VCP_AHB_BRIDGE_0,	34h */
+	u32 reserved13[2];		/* 38h, 3ch */
+	u32 gizmo_nand;			/* _GIZMO_NAND_0,		40h */
+	u32 reserved15;			/* 44h */
+	u32 gizmo_sdmmc4;		/* _GIZMO_SDMMC4_0,		48h */
+	u32 reserved17;			/* 4ch */
+	u32 gizmo_se;			/* _GIZMO_SE_0,			50h */
+	u32 gizmo_tzram;		/* _GIZMO_TZRAM_0,		54h */
+	u32 reserved20[3];		/* 58h, 5ch, 60h */
+	u32 gizmo_bsev;			/* _GIZMO_BSEV_0,		64h */
+	u32 reserved22[3];		/* 68h, 6ch, 70h */
+	u32 gizmo_bsea;			/* _GIZMO_BSEA_0,		74h */
+	u32 gizmo_nor;			/* _GIZMO_NOR_0,		78h */
+	u32 gizmo_usb2;			/* _GIZMO_USB2_0,		7ch */
+	u32 gizmo_usb3;			/* _GIZMO_USB3_0,		80h */
+	u32 gizmo_sdmmc1;		/* _GIZMO_SDMMC1_0,		84h */
+	u32 gizmo_sdmmc2;		/* _GIZMO_SDMMC2_0,		88h */
+	u32 gizmo_sdmmc3;		/* _GIZMO_SDMMC3_0,		8ch */
+	u32 reserved30[13];		/* 90h ~ c0h */
+	u32 ahb_wrq_empty;		/* _AHB_WRQ_EMPTY_0,		c4h */
+	u32 reserved32[5];		/* c8h ~ d8h */
+	u32 ahb_mem_prefetch_cfg_x;	/* _AHB_MEM_PREFETCH_CFG_X_0,	dch */
+	u32 arbitration_xbar_ctrl;	/* _ARBITRATION_XBAR_CTRL_0,	e0h */
+	u32 ahb_mem_prefetch_cfg3;	/* _AHB_MEM_PREFETCH_CFG3_0,	e4h */
+	u32 ahb_mem_prefetch_cfg4;	/* _AHB_MEM_PREFETCH_CFG3_0,	e8h */
+	u32 avp_ppcs_rd_coh_status;	/* _AVP_PPCS_RD_COH_STATUS_0,	ech */
+	u32 ahb_mem_prefetch_cfg1;	/* _AHB_MEM_PREFETCH_CFG1_0,	f0h */
+	u32 ahb_mem_prefetch_cfg2;	/* _AHB_MEM_PREFETCH_CFG2_0,	f4h */
+	u32 ahbslvmem_status;		/* _AHBSLVMEM_STATUS_0, f8h */
+	/* _ARBITRATION_AHB_MEM_WRQUE_MST_ID_0, fch */
+	u32 arbitration_ahb_mem_wrque_mst_id;
+	u32 arbitration_cpu_abort_addr;	/* _ARBITRATION_CPU_ABORT_ADDR_0,100h */
+	u32 arbitration_cpu_abort_info;	/* _ARBITRATION_CPU_ABORT_INFO_0,104h */
+	u32 arbitration_cop_abort_addr;	/* _ARBITRATION_COP_ABORT_ADDR_0,108h */
+	u32 arbitration_cop_abort_info;	/* _ARBITRATION_COP_ABORT_INFO_0,10ch */
+	u32 reserved46[4];		/* 110h ~ 11ch */
+	u32 avpc_mccif_fifoctrl;	/* _AVPC_MCCIF_FIFOCTRL_0,	120h */
+	u32 timeout_wcoal_avpc;		/* _TIMEOUT_WCOAL_AVPC_0,	124h */
+	u32 mpcorelp_mccif_fifoctrl;	/* _MPCORELP_MCCIF_FIFOCTRL_0,	128h */
+	u32 mpcore_mccif_fifoctrl;	/* _MPCORE_MCCIF_FIFOCTRL_0,	12ch */
+	u32 axicif_fastsync_ctrl;	/* AXICIF_FASTSYNC_CTRL_0,	130h */
+	u32 axicif_fastsync_statistics;	/* _AXICIF_FASTSYNC_STATISTICS_0,134h */
+	/* _AXICIF_FASTSYNC0_CPUCLK_TO_MCCLK_0,	138h */
+	u32 axicif_fastsync0_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC1_CPUCLK_TO_MCCLK_0, 13ch */
+	u32 axicif_fastsync1_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC2_CPUCLK_TO_MCCLK_0, 140h */
+	u32 axicif_fastsync2_cpuclk_to_mcclk;
+	/* _AXICIF_FASTSYNC0_MCCLK_TO_CPUCLK_0, 144h */
+	u32 axicif_fastsync0_mcclk_to_cpuclk;
+	/* _AXICIF_FASTSYNC1_MCCLK_TO_CPUCLK_0, 148h */
+	u32 axicif_fastsync1_mcclk_to_cpuclk;
+	/* _AXICIF_FASTSYNC2_MCCLK_TO_CPUCLK_0, 14ch */
+	u32 axicif_fastsync2_mcclk_to_cpuclk;
+};
+
+#define PPSB_STOPCLK_ENABLE	(1 << 2)
+
+#define GIZ_ENABLE_SPLIT	(1 << 0)
+#define GIZ_ENB_FAST_REARB	(1 << 2)
+#define GIZ_DONT_SPLIT_AHB_WR	(1 << 7)
+
+#define GIZ_USB_IMMEDIATE	(1 << 18)
+
+/* AHB_ARBITRATION_XBAR_CTRL_0 0xe0 */
+#define ARBITRATION_XBAR_CTRL_PPSB_ENABLE	(1 << 2)
+
+#endif	/* _TEGRA210_AHB_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/clock-tables.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/clock-tables.h
new file mode 100644
index 000000000..c6d7487e6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/clock-tables.h
@@ -0,0 +1,567 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra210 clock PLL tables */
+
+#ifndef _TEGRA210_CLOCK_TABLES_H_
+#define _TEGRA210_CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+	CLOCK_ID_FIRST,
+	CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+	CLOCK_ID_MEMORY,
+	CLOCK_ID_PERIPH,
+	CLOCK_ID_AUDIO,
+	CLOCK_ID_USB,
+	CLOCK_ID_DISPLAY,
+
+	/* now the simple ones */
+	CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_EPCI,
+	CLOCK_ID_SFROM32KHZ,
+	CLOCK_ID_DP,
+
+	/* These are the base clocks (inputs to the Tegra SoC) */
+	CLOCK_ID_32KHZ,
+	CLOCK_ID_OSC,
+	CLOCK_ID_CLK_M,
+
+	CLOCK_ID_COUNT,	/* number of PLLs */
+
+	/*
+	 * These are clock IDs that are used in table clock_source[][]
+	 * but will not be assigned as a clock source for any peripheral.
+	 */
+	CLOCK_ID_DISPLAY2,
+	CLOCK_ID_CGENERAL_0,
+	CLOCK_ID_CGENERAL_1,
+	CLOCK_ID_CGENERAL2,
+	CLOCK_ID_CGENERAL3,
+	CLOCK_ID_CGENERAL4_0,
+	CLOCK_ID_CGENERAL4_1,
+	CLOCK_ID_CGENERAL4_2,
+	CLOCK_ID_MEMORY2,
+	CLOCK_ID_SRC2,
+
+	CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+	PERIPH_ID_FIRST,
+
+	/* Low word: 31:0 (DEVICES_L) */
+	PERIPH_ID_CPU = PERIPH_ID_FIRST,
+	PERIPH_ID_COP,
+	PERIPH_ID_TRIGSYS,
+	PERIPH_ID_ISPB,
+	PERIPH_ID_RESERVED4,
+	PERIPH_ID_TMR,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+
+	/* 8 */
+	PERIPH_ID_GPIO,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SPDIF,
+	PERIPH_ID_I2S2,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_RESERVED13,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC4,
+
+	/* 16 */
+	PERIPH_ID_TCW,
+	PERIPH_ID_PWM,
+	PERIPH_ID_I2S3,
+	PERIPH_ID_RESERVED19,
+	PERIPH_ID_VI,
+	PERIPH_ID_RESERVED21,
+	PERIPH_ID_USBD,
+	PERIPH_ID_ISP,
+
+	/* 24 */
+	PERIPH_ID_RESERVED24,
+	PERIPH_ID_RESERVED25,
+	PERIPH_ID_DISP2,
+	PERIPH_ID_DISP1,
+	PERIPH_ID_HOST1X,
+	PERIPH_ID_VCP,
+	PERIPH_ID_I2S1,
+	PERIPH_ID_CACHE2,
+
+	/* Middle word: 63:32 (DEVICES_H) */
+	PERIPH_ID_MEM,
+	PERIPH_ID_AHBDMA,
+	PERIPH_ID_APBDMA,
+	PERIPH_ID_RESERVED35,
+	PERIPH_ID_RESERVED36,
+	PERIPH_ID_STAT_MON,
+	PERIPH_ID_RESERVED38,
+	PERIPH_ID_FUSE,
+
+	/* 40 */
+	PERIPH_ID_KFUSE,
+	PERIPH_ID_SBC1,
+	PERIPH_ID_SNOR,
+	PERIPH_ID_RESERVED43,
+	PERIPH_ID_SBC2,
+	PERIPH_ID_XIO,
+	PERIPH_ID_SBC3,
+	PERIPH_ID_I2C5,
+
+	/* 48 */
+	PERIPH_ID_DSI,
+	PERIPH_ID_RESERVED49,
+	PERIPH_ID_HSI,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_CSI,
+	PERIPH_ID_RESERVED53,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_UART3,
+
+	/* 56 */
+	PERIPH_ID_MIPI_CAL,
+	PERIPH_ID_EMC,
+	PERIPH_ID_USB2,
+	PERIPH_ID_USB3,
+	PERIPH_ID_RESERVED60,
+	PERIPH_ID_VDE,
+	PERIPH_ID_BSEA,
+	PERIPH_ID_BSEV,
+
+	/* Upper word 95:64 (DEVICES_U) */
+	PERIPH_ID_RESERVED64,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_SBC4,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_PCIE,
+	PERIPH_ID_OWR,
+
+	/* 72 */
+	PERIPH_ID_AFI,
+	PERIPH_ID_CORESIGHT,
+	PERIPH_ID_PCIEXCLK,
+	PERIPH_ID_AVPUCQ,
+	PERIPH_ID_LA,
+	PERIPH_ID_TRACECLKIN,
+	PERIPH_ID_SOC_THERM,
+	PERIPH_ID_DTV,
+
+	/* 80 */
+	PERIPH_ID_RESERVED80,
+	PERIPH_ID_I2CSLOW,
+	PERIPH_ID_DSIB,
+	PERIPH_ID_TSEC,
+	PERIPH_ID_RESERVED84,
+	PERIPH_ID_RESERVED85,
+	PERIPH_ID_RESERVED86,
+	PERIPH_ID_EMUCIF,
+
+	/* 88 */
+	PERIPH_ID_RESERVED88,
+	PERIPH_ID_XUSB_HOST,
+	PERIPH_ID_RESERVED90,
+	PERIPH_ID_MSENC,
+	PERIPH_ID_RESERVED92,
+	PERIPH_ID_RESERVED93,
+	PERIPH_ID_RESERVED94,
+	PERIPH_ID_XUSB_DEV,
+
+	PERIPH_ID_VW_FIRST,
+	/* V word: 31:0 */
+	PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST,
+	PERIPH_ID_CPULP,
+	PERIPH_ID_V_RESERVED2,
+	PERIPH_ID_MSELECT,
+	PERIPH_ID_V_RESERVED4,
+	PERIPH_ID_I2S4,
+	PERIPH_ID_I2S5,
+	PERIPH_ID_I2C4,
+
+	/* 104 */
+	PERIPH_ID_SBC5,
+	PERIPH_ID_SBC6,
+	PERIPH_ID_AHUB,
+	PERIPH_ID_APB2APE,
+	PERIPH_ID_V_RESERVED12,
+	PERIPH_ID_V_RESERVED13,
+	PERIPH_ID_V_RESERVED14,
+	PERIPH_ID_HDA2CODEC2X,
+
+	/* 112 */
+	PERIPH_ID_ATOMICS,
+	PERIPH_ID_V_RESERVED17,
+	PERIPH_ID_V_RESERVED18,
+	PERIPH_ID_V_RESERVED19,
+	PERIPH_ID_V_RESERVED20,
+	PERIPH_ID_V_RESERVED21,
+	PERIPH_ID_V_RESERVED22,
+	PERIPH_ID_ACTMON,
+
+	/* 120 */
+	PERIPH_ID_EXTPERIPH1,
+	PERIPH_ID_EXTPERIPH2,
+	PERIPH_ID_EXTPERIPH3,
+	PERIPH_ID_OOB,
+	PERIPH_ID_SATA,
+	PERIPH_ID_HDA,
+	PERIPH_ID_V_RESERVED30,
+	PERIPH_ID_V_RESERVED31,
+
+	/* W word: 31:0 */
+	PERIPH_ID_HDA2HDMICODEC,
+	PERIPH_ID_SATACOLD,
+	PERIPH_ID_W_RESERVED2,
+	PERIPH_ID_W_RESERVED3,
+	PERIPH_ID_W_RESERVED4,
+	PERIPH_ID_W_RESERVED5,
+	PERIPH_ID_W_RESERVED6,
+	PERIPH_ID_W_RESERVED7,
+
+	/* 136 */
+	PERIPH_ID_CEC,
+	PERIPH_ID_W_RESERVED9,
+	PERIPH_ID_W_RESERVED10,
+	PERIPH_ID_W_RESERVED11,
+	PERIPH_ID_W_RESERVED12,
+	PERIPH_ID_W_RESERVED13,
+	PERIPH_ID_XUSB_PADCTL,
+	PERIPH_ID_W_RESERVED15,
+
+	/* 144 */
+	PERIPH_ID_W_RESERVED16,
+	PERIPH_ID_W_RESERVED17,
+	PERIPH_ID_W_RESERVED18,
+	PERIPH_ID_W_RESERVED19,
+	PERIPH_ID_W_RESERVED20,
+	PERIPH_ID_ENTROPY,
+	PERIPH_ID_DDS,
+	PERIPH_ID_W_RESERVED23,
+
+	/* 152 */
+	PERIPH_ID_W_RESERVED24,
+	PERIPH_ID_W_RESERVED25,
+	PERIPH_ID_W_RESERVED26,
+	PERIPH_ID_DVFS,
+	PERIPH_ID_XUSB_SS,
+	PERIPH_ID_W_RESERVED29,
+	PERIPH_ID_W_RESERVED30,
+	PERIPH_ID_W_RESERVED31,
+
+	PERIPH_ID_X_FIRST,
+	/* X word: 31:0 */
+	PERIPH_ID_SPARE = PERIPH_ID_X_FIRST,
+	PERIPH_ID_X_RESERVED1,
+	PERIPH_ID_X_RESERVED2,
+	PERIPH_ID_X_RESERVED3,
+	PERIPH_ID_CAM_MCLK,
+	PERIPH_ID_CAM_MCLK2,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_X_RESERVED7,
+
+	/* 168 */
+	PERIPH_ID_X_RESERVED8,
+	PERIPH_ID_X_RESERVED9,
+	PERIPH_ID_X_RESERVED10,
+	PERIPH_ID_VIM2_CLK,
+	PERIPH_ID_X_RESERVED12,
+	PERIPH_ID_X_RESERVED13,
+	PERIPH_ID_EMC_DLL,
+	PERIPH_ID_X_RESERVED15,
+
+	/* 176 */
+	PERIPH_ID_HDMI_AUDIO,
+	PERIPH_ID_CLK72MHZ,
+	PERIPH_ID_VIC,
+	PERIPH_ID_X_RESERVED19,
+	PERIPH_ID_X_RESERVED20,
+	PERIPH_ID_DPAUX,
+	PERIPH_ID_SOR0,
+	PERIPH_ID_X_RESERVED23,
+
+	/* 184 */
+	PERIPH_ID_GPU,
+	PERIPH_ID_X_RESERVED25,
+	PERIPH_ID_X_RESERVED26,
+	PERIPH_ID_X_RESERVED27,
+	PERIPH_ID_X_RESERVED28,
+	PERIPH_ID_X_RESERVED29,
+	PERIPH_ID_X_RESERVED30,
+	PERIPH_ID_X_RESERVED31,
+
+	PERIPH_ID_Y_FIRST,
+	/* Y word: 31:0 (192:223) */
+	PERIPH_ID_SPARE1 = PERIPH_ID_Y_FIRST,
+	PERIPH_ID_Y_RESERVED1,
+	PERIPH_ID_Y_RESERVED2,
+	PERIPH_ID_Y_RESERVED3,
+	PERIPH_ID_Y_RESERVED4,
+	PERIPH_ID_Y_RESERVED5,
+	PERIPH_ID_APE,
+	PERIPH_ID_Y_RESERVED7,
+
+	/* 200 */
+	PERIPH_ID_MC_CDPA,
+	PERIPH_ID_Y_RESERVED9,
+	PERIPH_ID_Y_RESERVED10,
+	PERIPH_ID_Y_RESERVED11,
+	PERIPH_ID_Y_RESERVED12,
+	PERIPH_ID_PEX_USB_UPHY,
+	PERIPH_ID_Y_RESERVED14,
+	PERIPH_ID_Y_RESERVED15,
+
+	/* 208 */
+	PERIPH_ID_VI_I2C,
+	PERIPH_ID_Y_RESERVED17,
+	PERIPH_ID_Y_RESERVED18,
+	PERIPH_ID_QSPI,
+	PERIPH_ID_Y_RESERVED20,
+	PERIPH_ID_Y_RESERVED21,
+	PERIPH_ID_Y_RESERVED22,
+	PERIPH_ID_Y_RESERVED23,
+
+	/* 216 */
+	PERIPH_ID_Y_RESERVED24,
+	PERIPH_ID_Y_RESERVED25,
+	PERIPH_ID_Y_RESERVED26,
+	PERIPH_ID_Y_RESERVED27,
+	PERIPH_ID_Y_RESERVED28,
+	PERIPH_ID_Y_RESERVED29,
+	PERIPH_ID_Y_RESERVED30,
+	PERIPH_ID_Y_RESERVED31,
+
+	PERIPH_ID_COUNT,
+	PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+	PLL_OUT1,
+	PLL_OUT2,
+	PLL_OUT3,
+	PLL_OUT4
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ */
+enum periphc_internal_id {
+	/* 0x00 */
+	PERIPHC_I2S2,
+	PERIPHC_I2S3,
+	PERIPHC_SPDIF_OUT,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_PWM,
+	PERIPHC_05h,
+	PERIPHC_SBC2,
+	PERIPHC_SBC3,
+
+	/* 0x08 */
+	PERIPHC_08h,
+	PERIPHC_I2C1,
+	PERIPHC_I2C5,
+	PERIPHC_0bh,
+	PERIPHC_0ch,
+	PERIPHC_SBC1,
+	PERIPHC_DISP1,
+	PERIPHC_DISP2,
+
+	/* 0x10 */
+	PERIPHC_10h,
+	PERIPHC_11h,
+	PERIPHC_VI,
+	PERIPHC_13h,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC2,
+	PERIPHC_G3D,
+	PERIPHC_G2D,
+
+	/* 0x18 */
+	PERIPHC_18h,
+	PERIPHC_SDMMC4,
+	PERIPHC_VFIR,
+	PERIPHC_1Bh,
+	PERIPHC_1Ch,
+	PERIPHC_HSI,
+	PERIPHC_UART1,
+	PERIPHC_UART2,
+
+	/* 0x20 */
+	PERIPHC_HOST1X,
+	PERIPHC_21h,
+	PERIPHC_22h,
+	PERIPHC_HDMI,
+	PERIPHC_24h,
+	PERIPHC_25h,
+	PERIPHC_I2C2,
+	PERIPHC_EMC,
+
+	/* 0x28 */
+	PERIPHC_UART3,
+	PERIPHC_29h,
+	PERIPHC_VI_SENSOR,
+	PERIPHC_2bh,
+	PERIPHC_2ch,
+	PERIPHC_SBC4,
+	PERIPHC_I2C3,
+	PERIPHC_SDMMC3,
+
+	/* 0x30 */
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_VDE,
+	PERIPHC_OWR,
+	PERIPHC_NOR,
+	PERIPHC_CSITE,
+	PERIPHC_I2S1,
+	PERIPHC_DTV,
+
+	/* 0x38 */
+	PERIPHC_38h,
+	PERIPHC_39h,
+	PERIPHC_3ah,
+	PERIPHC_3bh,
+	PERIPHC_MSENC,
+	PERIPHC_TSEC,
+	PERIPHC_3eh,
+	PERIPHC_OSC,
+
+	PERIPHC_VW_FIRST,
+	/* 0x40 */
+	PERIPHC_40h = PERIPHC_VW_FIRST,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S4,
+	PERIPHC_I2S5,
+	PERIPHC_I2C4,
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+
+	/* 0x48 */
+	PERIPHC_AUDIO,
+	PERIPHC_49h,
+	PERIPHC_4ah,
+	PERIPHC_4bh,
+	PERIPHC_4ch,
+	PERIPHC_HDA2CODEC2X,
+	PERIPHC_ACTMON,
+	PERIPHC_EXTPERIPH1,
+
+	/* 0x50 */
+	PERIPHC_EXTPERIPH2,
+	PERIPHC_EXTPERIPH3,
+	PERIPHC_52h,
+	PERIPHC_I2CSLOW,
+	PERIPHC_SYS,
+	PERIPHC_55h,
+	PERIPHC_56h,
+	PERIPHC_57h,
+
+	/* 0x58 */
+	PERIPHC_58h,
+	PERIPHC_59h,
+	PERIPHC_5ah,
+	PERIPHC_5bh,
+	PERIPHC_SATAOOB,
+	PERIPHC_SATA,
+	PERIPHC_HDA,		/* 0x428 */
+	PERIPHC_5fh,
+
+	PERIPHC_X_FIRST,
+	/* 0x60 */
+	PERIPHC_XUSB_CORE_HOST = PERIPHC_X_FIRST,	/* 0x600 */
+	PERIPHC_XUSB_FALCON,
+	PERIPHC_XUSB_FS,
+	PERIPHC_XUSB_CORE_DEV,
+	PERIPHC_XUSB_SS,
+	PERIPHC_CILAB,
+	PERIPHC_CILCD,
+	PERIPHC_CILE,
+
+	/* 0x68 */
+	PERIPHC_DSIA_LP,
+	PERIPHC_DSIB_LP,
+	PERIPHC_ENTROPY,
+	PERIPHC_DVFS_REF,
+	PERIPHC_DVFS_SOC,
+	PERIPHC_TRACECLKIN,
+	PERIPHC_6Eh,
+	PERIPHC_6Fh,
+
+	/* 0x70 */
+	PERIPHC_EMC_LATENCY,
+	PERIPHC_SOC_THERM,
+	PERIPHC_72h,
+	PERIPHC_73h,
+	PERIPHC_74h,
+	PERIPHC_75h,
+	PERIPHC_VI_SENSOR2,
+	PERIPHC_I2C6,
+
+	/* 0x78 */
+	PERIPHC_78h,
+	PERIPHC_EMC_DLL,
+	PERIPHC_7ah,
+	PERIPHC_CLK72MHZ,
+	PERIPHC_7ch,
+	PERIPHC_7dh,
+	PERIPHC_VIC,
+	PERIPHC_7fh,
+
+	PERIPHC_Y_FIRST,
+	/* 0x80 */
+	PERIPHC_SDMMC_LEGACY_TM = PERIPHC_Y_FIRST,	/* 0x694 */
+	PERIPHC_NVDEC,			/* 0x698 */
+	PERIPHC_NVJPG,			/* 0x69c */
+	PERIPHC_NVENC,			/* 0x6a0 */
+	PERIPHC_84h,
+	PERIPHC_85h,
+	PERIPHC_86h,
+	PERIPHC_87h,
+
+	/* 0x88 */
+	PERIPHC_88h,
+	PERIPHC_89h,
+	PERIPHC_DMIC3,			/* 0x6bc:  */
+	PERIPHC_APE,			/* 0x6c0:  */
+	PERIPHC_QSPI,			/* 0x6c4:  */
+	PERIPHC_VI_I2C,			/* 0x6c8:  */
+	PERIPHC_USB2_HSIC_TRK,		/* 0x6cc:  */
+	PERIPHC_PEX_SATA_USB_RX_BYP,	/* 0x6d0:  */
+
+	/* 0x90 */
+	PERIPHC_MAUD,			/* 0x6d4:  */
+	PERIPHC_TSECB,			/* 0x6d8:  */
+
+	PERIPHC_COUNT,
+	PERIPHC_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */
+#define PERIPH_REG(id) \
+	(id < PERIPH_ID_VW_FIRST) ? \
+		((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+		(id) < PERIPH_ID_COUNT)
+
+#endif	/* _TEGRA210_CLOCK_TABLES_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/clock.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/clock.h
new file mode 100644
index 000000000..438a6f46c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/clock.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra210 clock control definitions */
+
+#ifndef _TEGRA210_CLOCK_H_
+#define _TEGRA210_CLOCK_H_
+
+#include <asm/arch-tegra/clock.h>
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT          28
+#define OSC_FREQ_MASK           (0xF << OSC_FREQ_SHIFT)
+
+/* PLL bits that differ from generic clk_rst.h */
+#define PLLC_RESET		30
+#define PLLC_IDDQ		27
+#define PLLD_ENABLE_CLK		21
+#define PLLD_EN_LCKDET		28
+
+int tegra_plle_enable(void);
+
+#endif	/* _TEGRA210_CLOCK_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/flow.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/flow.h
new file mode 100644
index 000000000..ef0be19e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/flow.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA210_FLOW_H_
+#define _TEGRA210_FLOW_H_
+
+struct flow_ctlr {
+	u32 halt_cpu_events;	/* offset 0x00 */
+	u32 halt_cop_events;	/* offset 0x04 */
+	u32 cpu_csr;		/* offset 0x08 */
+	u32 cop_csr;		/* offset 0x0c */
+	u32 xrq_events;		/* offset 0x10 */
+	u32 halt_cpu1_events;	/* offset 0x14 */
+	u32 cpu1_csr;		/* offset 0x18 */
+	u32 halt_cpu2_events;	/* offset 0x1c */
+	u32 cpu2_csr;		/* offset 0x20 */
+	u32 halt_cpu3_events;	/* offset 0x24 */
+	u32 cpu3_csr;		/* offset 0x28 */
+	u32 cluster_control;	/* offset 0x2c */
+	u32 halt_cop1_events;	/* offset 0x30 */
+	u32 halt_cop1_csr;	/* offset 0x34 */
+	u32 cpu_pwr_csr;	/* offset 0x38 */
+	u32 mpid;		/* offset 0x3c */
+	u32 ram_repair;		/* offset 0x40 */
+};
+
+/* HALT_COP_EVENTS_0, 0x04 */
+#define EVENT_MSEC		(1 << 24)
+#define EVENT_USEC		(1 << 25)
+#define EVENT_JTAG		(1 << 28)
+#define EVENT_MODE_STOP		(2 << 29)
+
+/* FLOW_CTLR_CLUSTER_CONTROL_0 0x2c */
+#define ACTIVE_LP		(1 << 0)
+
+/* CPUn_CSR_0 */
+#define CSR_ENABLE		(1 << 0)
+#define CSR_IMMEDIATE_WAKE	(1 << 3)
+#define CSR_WAIT_WFI_SHIFT	8
+
+#endif /*  _TEGRA210_FLOW_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/funcmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/funcmux.h
new file mode 100644
index 000000000..f6270e57a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/funcmux.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra210 high-level function multiplexing */
+
+#ifndef _TEGRA210_FUNCMUX_H_
+#define _TEGRA210_FUNCMUX_H_
+
+#include <asm/arch-tegra/funcmux.h>
+
+/* Configs supported by the func mux */
+enum {
+	FUNCMUX_DEFAULT = 0,	/* default config */
+
+	/* UART configs */
+	FUNCMUX_UART1_UART1 = 0,
+	FUNCMUX_UART4_UART4 = 0,
+};
+#endif	/* _TEGRA210_FUNCMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/gp_padctrl.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/gp_padctrl.h
new file mode 100644
index 000000000..e9ff90375
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/gp_padctrl.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA210_GP_PADCTRL_H_
+#define _TEGRA210_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+	u32	modereg;	/* 0x00: APB_MISC_GP_MODEREG */
+	u32	hidrev;		/* 0x04: APB_MISC_GP_HIDREV */
+	u32	reserved0[22];	/* 0x08 - 0x5C: */
+	u32	emu_revid;	/* 0x60: APB_MISC_GP_EMU_REVID */
+	u32	xactor_scratch;	/* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+	u32	aocfg1;		/* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+	u32	aocfg2;		/* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */
+	u32	atcfg1;		/* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+	u32	atcfg2;		/* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+	u32	atcfg3;		/* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
+	u32	atcfg4;		/* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */
+	u32	atcfg5;		/* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
+	u32	cdev1cfg;	/* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
+	u32	cdev2cfg;	/* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
+	u32	reserved1;	/* 0x8C: */
+	u32	dap1cfg;	/* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
+	u32	dap2cfg;	/* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
+	u32	dap3cfg;	/* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
+	u32	dap4cfg;	/* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
+	u32	dbgcfg;		/* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
+	u32	reserved2[3];	/* 0xA4 - 0xAC: */
+	u32	sdio3cfg;	/* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
+	u32	spicfg;		/* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
+	u32	uaacfg;		/* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
+	u32	uabcfg;		/* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
+	u32	uart2cfg;	/* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
+	u32	uart3cfg;	/* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
+	u32	reserved3[9];	/* 0xC8-0xE8: */
+	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+	u32	reserved4[3];	/* 0xF0-0xF8: */
+	u32	ddccfg;		/* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */
+	u32	gmacfg;		/* 0x100: APB_MISC_GP_GMACFGPADCTRL */
+	u32	reserved5[3];	/* 0x104-0x10C: */
+	u32	gmecfg;		/* 0x110: APB_MISC_GP_GMECFGPADCTRL */
+	u32	gmfcfg;		/* 0x114: APB_MISC_GP_GMFCFGPADCTRL */
+	u32	gmgcfg;		/* 0x118: APB_MISC_GP_GMGCFGPADCTRL */
+	u32	gmhcfg;		/* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */
+	u32	owrcfg;		/* 0x120: APB_MISC_GP_OWRCFGPADCTRL */
+	u32	uadcfg;		/* 0x124: APB_MISC_GP_UADCFGPADCTRL */
+	u32	reserved6;	/* 0x128: */
+	u32	dev3cfg;	/* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */
+	u32	reserved7[2];	/* 0x130 - 0x134: */
+	u32	ceccfg;		/* 0x138: APB_MISC_GP_CECCFGPADCTRL */
+	u32	reserved8[22];	/* 0x13C - 0x190: */
+	u32	atcfg6;		/* 0x194: APB_MISC_GP_ATCFG6PADCTRL */
+	u32	dap5cfg;	/* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */
+	u32	vbuscfg;	/* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */
+	u32	aocfg3;		/* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */
+	u32	hvccfg0;	/* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */
+	u32	sdio4cfg;	/* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */
+	u32	aocfg0;		/* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */
+};
+
+/* SDMMC1/3 settings from section 27.5 of T114 TRM */
+#define SDIOCFG_DRVUP_SLWF	0
+#define SDIOCFG_DRVDN_SLWR	0
+#define SDIOCFG_DRVUP		0x24
+#define SDIOCFG_DRVDN		0x14
+
+#endif	/* _TEGRA210_GP_PADCTRL_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/gpio.h
new file mode 100644
index 000000000..cb91b10be
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/gpio.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA210_GPIO_H_
+#define _TEGRA210_GPIO_H_
+
+/*
+ * The Tegra210 GPIO controller has 256 GPIOS in 8 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS	4	/* number of ports per bank */
+#define TEGRA_GPIO_BANKS	8	/* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+	uint gpio_config[TEGRA_GPIO_PORTS];
+	uint gpio_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_out[TEGRA_GPIO_PORTS];
+	uint gpio_in[TEGRA_GPIO_PORTS];
+	uint gpio_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_int_clear[TEGRA_GPIO_PORTS];
+	uint gpio_masked_config[TEGRA_GPIO_PORTS];
+	uint gpio_masked_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_in[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+	struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+#endif	/* _TEGRA210_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/mc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/mc.h
new file mode 100644
index 000000000..5a2a5681d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/mc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2014-2015 NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef _TEGRA210_MC_H_
+#define _TEGRA210_MC_H_
+
+/**
+ * Defines the memory controller registers we need/care about
+ */
+struct mc_ctlr {
+	u32 reserved0[4];			/* offset 0x00 - 0x0C */
+	u32 mc_smmu_config;			/* offset 0x10 */
+	u32 mc_smmu_tlb_config;			/* offset 0x14 */
+	u32 mc_smmu_ptc_config;			/* offset 0x18 */
+	u32 mc_smmu_ptb_asid;			/* offset 0x1C */
+	u32 mc_smmu_ptb_data;			/* offset 0x20 */
+	u32 reserved1[3];			/* offset 0x24 - 0x2C */
+	u32 mc_smmu_tlb_flush;			/* offset 0x30 */
+	u32 mc_smmu_ptc_flush;			/* offset 0x34 */
+	u32 reserved2[6];			/* offset 0x38 - 0x4C */
+	u32 mc_emem_cfg;			/* offset 0x50 */
+	u32 mc_emem_adr_cfg;			/* offset 0x54 */
+	u32 mc_emem_adr_cfg_dev0;		/* offset 0x58 */
+	u32 mc_emem_adr_cfg_dev1;		/* offset 0x5C */
+	u32 reserved3[4];			/* offset 0x60 - 0x6C */
+	u32 mc_security_cfg0;			/* offset 0x70 */
+	u32 mc_security_cfg1;			/* offset 0x74 */
+	u32 reserved4[6];			/* offset 0x7C - 0x8C */
+	u32 mc_emem_arb_reserved[28];		/* offset 0x90 - 0xFC */
+	u32 reserved5[74];			/* offset 0x100 - 0x224 */
+	u32 mc_smmu_translation_enable_0;	/* offset 0x228 */
+	u32 mc_smmu_translation_enable_1;	/* offset 0x22C */
+	u32 mc_smmu_translation_enable_2;	/* offset 0x230 */
+	u32 mc_smmu_translation_enable_3;	/* offset 0x234 */
+	u32 mc_smmu_afi_asid;			/* offset 0x238 */
+	u32 mc_smmu_avpc_asid;			/* offset 0x23C */
+	u32 mc_smmu_dc_asid;			/* offset 0x240 */
+	u32 mc_smmu_dcb_asid;			/* offset 0x244 */
+	u32 reserved6[2];                       /* offset 0x248 - 0x24C */
+	u32 mc_smmu_hc_asid;			/* offset 0x250 */
+	u32 mc_smmu_hda_asid;			/* offset 0x254 */
+	u32 mc_smmu_isp2_asid;			/* offset 0x258 */
+	u32 reserved7[2];                       /* offset 0x25C - 0x260 */
+	u32 mc_smmu_msenc_asid;			/* offset 0x264 */
+	u32 mc_smmu_nv_asid;			/* offset 0x268 */
+	u32 mc_smmu_nv2_asid;			/* offset 0x26C */
+	u32 mc_smmu_ppcs_asid;			/* offset 0x270 */
+	u32 mc_smmu_sata_asid;			/* offset 0x274 */
+	u32 reserved8[1];                       /* offset 0x278 */
+	u32 mc_smmu_vde_asid;			/* offset 0x27C */
+	u32 mc_smmu_vi_asid;			/* offset 0x280 */
+	u32 mc_smmu_vic_asid;			/* offset 0x284 */
+	u32 mc_smmu_xusb_host_asid;		/* offset 0x288 */
+	u32 mc_smmu_xusb_dev_asid;		/* offset 0x28C */
+	u32 reserved9[1];                       /* offset 0x290 */
+	u32 mc_smmu_tsec_asid;			/* offset 0x294 */
+	u32 mc_smmu_ppcs1_asid;			/* offset 0x298 */
+	u32 reserved10[235];			/* offset 0x29C - 0x644 */
+	u32 mc_video_protect_bom;		/* offset 0x648 */
+	u32 mc_video_protect_size_mb;		/* offset 0x64c */
+	u32 mc_video_protect_reg_ctrl;		/* offset 0x650 */
+};
+
+#define TEGRA_MC_SMMU_CONFIG_ENABLE (1 << 0)
+
+#define TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_ENABLED		(0 << 0)
+#define TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_DISABLED	(1 << 0)
+
+#endif	/* _TEGRA210_MC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/pinmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/pinmux.h
new file mode 100644
index 000000000..9e9407462
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/pinmux.h
@@ -0,0 +1,415 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef _TEGRA210_PINMUX_H_
+#define _TEGRA210_PINMUX_H_
+
+enum pmux_pingrp {
+	PMUX_PINGRP_SDMMC1_CLK_PM0,
+	PMUX_PINGRP_SDMMC1_CMD_PM1,
+	PMUX_PINGRP_SDMMC1_DAT3_PM2,
+	PMUX_PINGRP_SDMMC1_DAT2_PM3,
+	PMUX_PINGRP_SDMMC1_DAT1_PM4,
+	PMUX_PINGRP_SDMMC1_DAT0_PM5,
+	PMUX_PINGRP_SDMMC3_CLK_PP0 = (0x1c / 4),
+	PMUX_PINGRP_SDMMC3_CMD_PP1,
+	PMUX_PINGRP_SDMMC3_DAT0_PP5,
+	PMUX_PINGRP_SDMMC3_DAT1_PP4,
+	PMUX_PINGRP_SDMMC3_DAT2_PP3,
+	PMUX_PINGRP_SDMMC3_DAT3_PP2,
+	PMUX_PINGRP_PEX_L0_RST_N_PA0 = (0x38 / 4),
+	PMUX_PINGRP_PEX_L0_CLKREQ_N_PA1,
+	PMUX_PINGRP_PEX_WAKE_N_PA2,
+	PMUX_PINGRP_PEX_L1_RST_N_PA3,
+	PMUX_PINGRP_PEX_L1_CLKREQ_N_PA4,
+	PMUX_PINGRP_SATA_LED_ACTIVE_PA5,
+	PMUX_PINGRP_SPI1_MOSI_PC0,
+	PMUX_PINGRP_SPI1_MISO_PC1,
+	PMUX_PINGRP_SPI1_SCK_PC2,
+	PMUX_PINGRP_SPI1_CS0_PC3,
+	PMUX_PINGRP_SPI1_CS1_PC4,
+	PMUX_PINGRP_SPI2_MOSI_PB4,
+	PMUX_PINGRP_SPI2_MISO_PB5,
+	PMUX_PINGRP_SPI2_SCK_PB6,
+	PMUX_PINGRP_SPI2_CS0_PB7,
+	PMUX_PINGRP_SPI2_CS1_PDD0,
+	PMUX_PINGRP_SPI4_MOSI_PC7,
+	PMUX_PINGRP_SPI4_MISO_PD0,
+	PMUX_PINGRP_SPI4_SCK_PC5,
+	PMUX_PINGRP_SPI4_CS0_PC6,
+	PMUX_PINGRP_QSPI_SCK_PEE0,
+	PMUX_PINGRP_QSPI_CS_N_PEE1,
+	PMUX_PINGRP_QSPI_IO0_PEE2,
+	PMUX_PINGRP_QSPI_IO1_PEE3,
+	PMUX_PINGRP_QSPI_IO2_PEE4,
+	PMUX_PINGRP_QSPI_IO3_PEE5,
+	PMUX_PINGRP_DMIC1_CLK_PE0 = (0xa4 / 4),
+	PMUX_PINGRP_DMIC1_DAT_PE1,
+	PMUX_PINGRP_DMIC2_CLK_PE2,
+	PMUX_PINGRP_DMIC2_DAT_PE3,
+	PMUX_PINGRP_DMIC3_CLK_PE4,
+	PMUX_PINGRP_DMIC3_DAT_PE5,
+	PMUX_PINGRP_GEN1_I2C_SCL_PJ1,
+	PMUX_PINGRP_GEN1_I2C_SDA_PJ0,
+	PMUX_PINGRP_GEN2_I2C_SCL_PJ2,
+	PMUX_PINGRP_GEN2_I2C_SDA_PJ3,
+	PMUX_PINGRP_GEN3_I2C_SCL_PF0,
+	PMUX_PINGRP_GEN3_I2C_SDA_PF1,
+	PMUX_PINGRP_CAM_I2C_SCL_PS2,
+	PMUX_PINGRP_CAM_I2C_SDA_PS3,
+	PMUX_PINGRP_PWR_I2C_SCL_PY3,
+	PMUX_PINGRP_PWR_I2C_SDA_PY4,
+	PMUX_PINGRP_UART1_TX_PU0,
+	PMUX_PINGRP_UART1_RX_PU1,
+	PMUX_PINGRP_UART1_RTS_PU2,
+	PMUX_PINGRP_UART1_CTS_PU3,
+	PMUX_PINGRP_UART2_TX_PG0,
+	PMUX_PINGRP_UART2_RX_PG1,
+	PMUX_PINGRP_UART2_RTS_PG2,
+	PMUX_PINGRP_UART2_CTS_PG3,
+	PMUX_PINGRP_UART3_TX_PD1,
+	PMUX_PINGRP_UART3_RX_PD2,
+	PMUX_PINGRP_UART3_RTS_PD3,
+	PMUX_PINGRP_UART3_CTS_PD4,
+	PMUX_PINGRP_UART4_TX_PI4,
+	PMUX_PINGRP_UART4_RX_PI5,
+	PMUX_PINGRP_UART4_RTS_PI6,
+	PMUX_PINGRP_UART4_CTS_PI7,
+	PMUX_PINGRP_DAP1_FS_PB0,
+	PMUX_PINGRP_DAP1_DIN_PB1,
+	PMUX_PINGRP_DAP1_DOUT_PB2,
+	PMUX_PINGRP_DAP1_SCLK_PB3,
+	PMUX_PINGRP_DAP2_FS_PAA0,
+	PMUX_PINGRP_DAP2_DIN_PAA2,
+	PMUX_PINGRP_DAP2_DOUT_PAA3,
+	PMUX_PINGRP_DAP2_SCLK_PAA1,
+	PMUX_PINGRP_DAP4_FS_PJ4,
+	PMUX_PINGRP_DAP4_DIN_PJ5,
+	PMUX_PINGRP_DAP4_DOUT_PJ6,
+	PMUX_PINGRP_DAP4_SCLK_PJ7,
+	PMUX_PINGRP_CAM1_MCLK_PS0,
+	PMUX_PINGRP_CAM2_MCLK_PS1,
+	PMUX_PINGRP_JTAG_RTCK,
+	PMUX_PINGRP_CLK_32K_IN,
+	PMUX_PINGRP_CLK_32K_OUT_PY5,
+	PMUX_PINGRP_BATT_BCL,
+	PMUX_PINGRP_CLK_REQ,
+	PMUX_PINGRP_CPU_PWR_REQ,
+	PMUX_PINGRP_PWR_INT_N,
+	PMUX_PINGRP_SHUTDOWN,
+	PMUX_PINGRP_CORE_PWR_REQ,
+	PMUX_PINGRP_AUD_MCLK_PBB0,
+	PMUX_PINGRP_DVFS_PWM_PBB1,
+	PMUX_PINGRP_DVFS_CLK_PBB2,
+	PMUX_PINGRP_GPIO_X1_AUD_PBB3,
+	PMUX_PINGRP_GPIO_X3_AUD_PBB4,
+	PMUX_PINGRP_PCC7,
+	PMUX_PINGRP_HDMI_CEC_PCC0,
+	PMUX_PINGRP_HDMI_INT_DP_HPD_PCC1,
+	PMUX_PINGRP_SPDIF_OUT_PCC2,
+	PMUX_PINGRP_SPDIF_IN_PCC3,
+	PMUX_PINGRP_USB_VBUS_EN0_PCC4,
+	PMUX_PINGRP_USB_VBUS_EN1_PCC5,
+	PMUX_PINGRP_DP_HPD0_PCC6,
+	PMUX_PINGRP_WIFI_EN_PH0,
+	PMUX_PINGRP_WIFI_RST_PH1,
+	PMUX_PINGRP_WIFI_WAKE_AP_PH2,
+	PMUX_PINGRP_AP_WAKE_BT_PH3,
+	PMUX_PINGRP_BT_RST_PH4,
+	PMUX_PINGRP_BT_WAKE_AP_PH5,
+	PMUX_PINGRP_AP_WAKE_NFC_PH7,
+	PMUX_PINGRP_NFC_EN_PI0,
+	PMUX_PINGRP_NFC_INT_PI1,
+	PMUX_PINGRP_GPS_EN_PI2,
+	PMUX_PINGRP_GPS_RST_PI3,
+	PMUX_PINGRP_CAM_RST_PS4,
+	PMUX_PINGRP_CAM_AF_EN_PS5,
+	PMUX_PINGRP_CAM_FLASH_EN_PS6,
+	PMUX_PINGRP_CAM1_PWDN_PS7,
+	PMUX_PINGRP_CAM2_PWDN_PT0,
+	PMUX_PINGRP_CAM1_STROBE_PT1,
+	PMUX_PINGRP_LCD_TE_PY2,
+	PMUX_PINGRP_LCD_BL_PWM_PV0,
+	PMUX_PINGRP_LCD_BL_EN_PV1,
+	PMUX_PINGRP_LCD_RST_PV2,
+	PMUX_PINGRP_LCD_GPIO1_PV3,
+	PMUX_PINGRP_LCD_GPIO2_PV4,
+	PMUX_PINGRP_AP_READY_PV5,
+	PMUX_PINGRP_TOUCH_RST_PV6,
+	PMUX_PINGRP_TOUCH_CLK_PV7,
+	PMUX_PINGRP_MODEM_WAKE_AP_PX0,
+	PMUX_PINGRP_TOUCH_INT_PX1,
+	PMUX_PINGRP_MOTION_INT_PX2,
+	PMUX_PINGRP_ALS_PROX_INT_PX3,
+	PMUX_PINGRP_TEMP_ALERT_PX4,
+	PMUX_PINGRP_BUTTON_POWER_ON_PX5,
+	PMUX_PINGRP_BUTTON_VOL_UP_PX6,
+	PMUX_PINGRP_BUTTON_VOL_DOWN_PX7,
+	PMUX_PINGRP_BUTTON_SLIDE_SW_PY0,
+	PMUX_PINGRP_BUTTON_HOME_PY1,
+	PMUX_PINGRP_PA6,
+	PMUX_PINGRP_PE6,
+	PMUX_PINGRP_PE7,
+	PMUX_PINGRP_PH6,
+	PMUX_PINGRP_PK0,
+	PMUX_PINGRP_PK1,
+	PMUX_PINGRP_PK2,
+	PMUX_PINGRP_PK3,
+	PMUX_PINGRP_PK4,
+	PMUX_PINGRP_PK5,
+	PMUX_PINGRP_PK6,
+	PMUX_PINGRP_PK7,
+	PMUX_PINGRP_PL0,
+	PMUX_PINGRP_PL1,
+	PMUX_PINGRP_PZ0,
+	PMUX_PINGRP_PZ1,
+	PMUX_PINGRP_PZ2,
+	PMUX_PINGRP_PZ3,
+	PMUX_PINGRP_PZ4,
+	PMUX_PINGRP_PZ5,
+	PMUX_PINGRP_COUNT,
+};
+
+enum pmux_drvgrp {
+	PMUX_DRVGRP_ALS_PROX_INT = (0x10 / 4),
+	PMUX_DRVGRP_AP_READY,
+	PMUX_DRVGRP_AP_WAKE_BT,
+	PMUX_DRVGRP_AP_WAKE_NFC,
+	PMUX_DRVGRP_AUD_MCLK,
+	PMUX_DRVGRP_BATT_BCL,
+	PMUX_DRVGRP_BT_RST,
+	PMUX_DRVGRP_BT_WAKE_AP,
+	PMUX_DRVGRP_BUTTON_HOME,
+	PMUX_DRVGRP_BUTTON_POWER_ON,
+	PMUX_DRVGRP_BUTTON_SLIDE_SW,
+	PMUX_DRVGRP_BUTTON_VOL_DOWN,
+	PMUX_DRVGRP_BUTTON_VOL_UP,
+	PMUX_DRVGRP_CAM1_MCLK,
+	PMUX_DRVGRP_CAM1_PWDN,
+	PMUX_DRVGRP_CAM1_STROBE,
+	PMUX_DRVGRP_CAM2_MCLK,
+	PMUX_DRVGRP_CAM2_PWDN,
+	PMUX_DRVGRP_CAM_AF_EN,
+	PMUX_DRVGRP_CAM_FLASH_EN,
+	PMUX_DRVGRP_CAM_I2C_SCL,
+	PMUX_DRVGRP_CAM_I2C_SDA,
+	PMUX_DRVGRP_CAM_RST,
+	PMUX_DRVGRP_CLK_32K_IN,
+	PMUX_DRVGRP_CLK_32K_OUT,
+	PMUX_DRVGRP_CLK_REQ,
+	PMUX_DRVGRP_CORE_PWR_REQ,
+	PMUX_DRVGRP_CPU_PWR_REQ,
+	PMUX_DRVGRP_DAP1_DIN,
+	PMUX_DRVGRP_DAP1_DOUT,
+	PMUX_DRVGRP_DAP1_FS,
+	PMUX_DRVGRP_DAP1_SCLK,
+	PMUX_DRVGRP_DAP2_DIN,
+	PMUX_DRVGRP_DAP2_DOUT,
+	PMUX_DRVGRP_DAP2_FS,
+	PMUX_DRVGRP_DAP2_SCLK,
+	PMUX_DRVGRP_DAP4_DIN,
+	PMUX_DRVGRP_DAP4_DOUT,
+	PMUX_DRVGRP_DAP4_FS,
+	PMUX_DRVGRP_DAP4_SCLK,
+	PMUX_DRVGRP_DMIC1_CLK,
+	PMUX_DRVGRP_DMIC1_DAT,
+	PMUX_DRVGRP_DMIC2_CLK,
+	PMUX_DRVGRP_DMIC2_DAT,
+	PMUX_DRVGRP_DMIC3_CLK,
+	PMUX_DRVGRP_DMIC3_DAT,
+	PMUX_DRVGRP_DP_HPD0,
+	PMUX_DRVGRP_DVFS_CLK,
+	PMUX_DRVGRP_DVFS_PWM,
+	PMUX_DRVGRP_GEN1_I2C_SCL,
+	PMUX_DRVGRP_GEN1_I2C_SDA,
+	PMUX_DRVGRP_GEN2_I2C_SCL,
+	PMUX_DRVGRP_GEN2_I2C_SDA,
+	PMUX_DRVGRP_GEN3_I2C_SCL,
+	PMUX_DRVGRP_GEN3_I2C_SDA,
+	PMUX_DRVGRP_PA6,
+	PMUX_DRVGRP_PCC7,
+	PMUX_DRVGRP_PE6,
+	PMUX_DRVGRP_PE7,
+	PMUX_DRVGRP_PH6,
+	PMUX_DRVGRP_PK0,
+	PMUX_DRVGRP_PK1,
+	PMUX_DRVGRP_PK2,
+	PMUX_DRVGRP_PK3,
+	PMUX_DRVGRP_PK4,
+	PMUX_DRVGRP_PK5,
+	PMUX_DRVGRP_PK6,
+	PMUX_DRVGRP_PK7,
+	PMUX_DRVGRP_PL0,
+	PMUX_DRVGRP_PL1,
+	PMUX_DRVGRP_PZ0,
+	PMUX_DRVGRP_PZ1,
+	PMUX_DRVGRP_PZ2,
+	PMUX_DRVGRP_PZ3,
+	PMUX_DRVGRP_PZ4,
+	PMUX_DRVGRP_PZ5,
+	PMUX_DRVGRP_GPIO_X1_AUD,
+	PMUX_DRVGRP_GPIO_X3_AUD,
+	PMUX_DRVGRP_GPS_EN,
+	PMUX_DRVGRP_GPS_RST,
+	PMUX_DRVGRP_HDMI_CEC,
+	PMUX_DRVGRP_HDMI_INT_DP_HPD,
+	PMUX_DRVGRP_JTAG_RTCK,
+	PMUX_DRVGRP_LCD_BL_EN,
+	PMUX_DRVGRP_LCD_BL_PWM,
+	PMUX_DRVGRP_LCD_GPIO1,
+	PMUX_DRVGRP_LCD_GPIO2,
+	PMUX_DRVGRP_LCD_RST,
+	PMUX_DRVGRP_LCD_TE,
+	PMUX_DRVGRP_MODEM_WAKE_AP,
+	PMUX_DRVGRP_MOTION_INT,
+	PMUX_DRVGRP_NFC_EN,
+	PMUX_DRVGRP_NFC_INT,
+	PMUX_DRVGRP_PEX_L0_CLKREQ_N,
+	PMUX_DRVGRP_PEX_L0_RST_N,
+	PMUX_DRVGRP_PEX_L1_CLKREQ_N,
+	PMUX_DRVGRP_PEX_L1_RST_N,
+	PMUX_DRVGRP_PEX_WAKE_N,
+	PMUX_DRVGRP_PWR_I2C_SCL,
+	PMUX_DRVGRP_PWR_I2C_SDA,
+	PMUX_DRVGRP_PWR_INT_N,
+	PMUX_DRVGRP_QSPI_SCK = (0x1bc / 4),
+	PMUX_DRVGRP_SATA_LED_ACTIVE,
+	PMUX_DRVGRP_SDMMC1,
+	PMUX_DRVGRP_SDMMC2,
+	PMUX_DRVGRP_SDMMC3 = (0x1dc / 4),
+	PMUX_DRVGRP_SDMMC4,
+	PMUX_DRVGRP_SHUTDOWN = (0x1f4 / 4),
+	PMUX_DRVGRP_SPDIF_IN,
+	PMUX_DRVGRP_SPDIF_OUT,
+	PMUX_DRVGRP_SPI1_CS0,
+	PMUX_DRVGRP_SPI1_CS1,
+	PMUX_DRVGRP_SPI1_MISO,
+	PMUX_DRVGRP_SPI1_MOSI,
+	PMUX_DRVGRP_SPI1_SCK,
+	PMUX_DRVGRP_SPI2_CS0,
+	PMUX_DRVGRP_SPI2_CS1,
+	PMUX_DRVGRP_SPI2_MISO,
+	PMUX_DRVGRP_SPI2_MOSI,
+	PMUX_DRVGRP_SPI2_SCK,
+	PMUX_DRVGRP_SPI4_CS0,
+	PMUX_DRVGRP_SPI4_MISO,
+	PMUX_DRVGRP_SPI4_MOSI,
+	PMUX_DRVGRP_SPI4_SCK,
+	PMUX_DRVGRP_TEMP_ALERT,
+	PMUX_DRVGRP_TOUCH_CLK,
+	PMUX_DRVGRP_TOUCH_INT,
+	PMUX_DRVGRP_TOUCH_RST,
+	PMUX_DRVGRP_UART1_CTS,
+	PMUX_DRVGRP_UART1_RTS,
+	PMUX_DRVGRP_UART1_RX,
+	PMUX_DRVGRP_UART1_TX,
+	PMUX_DRVGRP_UART2_CTS,
+	PMUX_DRVGRP_UART2_RTS,
+	PMUX_DRVGRP_UART2_RX,
+	PMUX_DRVGRP_UART2_TX,
+	PMUX_DRVGRP_UART3_CTS,
+	PMUX_DRVGRP_UART3_RTS,
+	PMUX_DRVGRP_UART3_RX,
+	PMUX_DRVGRP_UART3_TX,
+	PMUX_DRVGRP_UART4_CTS,
+	PMUX_DRVGRP_UART4_RTS,
+	PMUX_DRVGRP_UART4_RX,
+	PMUX_DRVGRP_UART4_TX,
+	PMUX_DRVGRP_USB_VBUS_EN0,
+	PMUX_DRVGRP_USB_VBUS_EN1,
+	PMUX_DRVGRP_WIFI_EN,
+	PMUX_DRVGRP_WIFI_RST,
+	PMUX_DRVGRP_WIFI_WAKE_AP,
+	PMUX_DRVGRP_COUNT,
+};
+
+enum pmux_func {
+	PMUX_FUNC_DEFAULT,
+	PMUX_FUNC_AUD,
+	PMUX_FUNC_BCL,
+	PMUX_FUNC_BLINK,
+	PMUX_FUNC_CCLA,
+	PMUX_FUNC_CEC,
+	PMUX_FUNC_CLDVFS,
+	PMUX_FUNC_CLK,
+	PMUX_FUNC_CORE,
+	PMUX_FUNC_CPU,
+	PMUX_FUNC_DISPLAYA,
+	PMUX_FUNC_DISPLAYB,
+	PMUX_FUNC_DMIC1,
+	PMUX_FUNC_DMIC2,
+	PMUX_FUNC_DMIC3,
+	PMUX_FUNC_DP,
+	PMUX_FUNC_DTV,
+	PMUX_FUNC_EXTPERIPH3,
+	PMUX_FUNC_I2C1,
+	PMUX_FUNC_I2C2,
+	PMUX_FUNC_I2C3,
+	PMUX_FUNC_I2CPMU,
+	PMUX_FUNC_I2CVI,
+	PMUX_FUNC_I2S1,
+	PMUX_FUNC_I2S2,
+	PMUX_FUNC_I2S3,
+	PMUX_FUNC_I2S4A,
+	PMUX_FUNC_I2S4B,
+	PMUX_FUNC_I2S5A,
+	PMUX_FUNC_I2S5B,
+	PMUX_FUNC_IQC0,
+	PMUX_FUNC_IQC1,
+	PMUX_FUNC_JTAG,
+	PMUX_FUNC_PE,
+	PMUX_FUNC_PE0,
+	PMUX_FUNC_PE1,
+	PMUX_FUNC_PMI,
+	PMUX_FUNC_PWM0,
+	PMUX_FUNC_PWM1,
+	PMUX_FUNC_PWM2,
+	PMUX_FUNC_PWM3,
+	PMUX_FUNC_QSPI,
+	PMUX_FUNC_SATA,
+	PMUX_FUNC_SDMMC1,
+	PMUX_FUNC_SDMMC3,
+	PMUX_FUNC_SHUTDOWN,
+	PMUX_FUNC_SOC,
+	PMUX_FUNC_SOR0,
+	PMUX_FUNC_SOR1,
+	PMUX_FUNC_SPDIF,
+	PMUX_FUNC_SPI1,
+	PMUX_FUNC_SPI2,
+	PMUX_FUNC_SPI3,
+	PMUX_FUNC_SPI4,
+	PMUX_FUNC_SYS,
+	PMUX_FUNC_TOUCH,
+	PMUX_FUNC_UART,
+	PMUX_FUNC_UARTA,
+	PMUX_FUNC_UARTB,
+	PMUX_FUNC_UARTC,
+	PMUX_FUNC_UARTD,
+	PMUX_FUNC_USB,
+	PMUX_FUNC_VGP1,
+	PMUX_FUNC_VGP2,
+	PMUX_FUNC_VGP3,
+	PMUX_FUNC_VGP4,
+	PMUX_FUNC_VGP5,
+	PMUX_FUNC_VGP6,
+	PMUX_FUNC_VIMCLK,
+	PMUX_FUNC_VIMCLK2,
+	PMUX_FUNC_RSVD0,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_COUNT,
+};
+
+#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x8d4
+#define TEGRA_PMX_SOC_HAS_IO_CLAMPING
+#define TEGRA_PMX_SOC_HAS_DRVGRPS
+#define TEGRA_PMX_PINS_HAVE_E_INPUT
+#define TEGRA_PMX_PINS_HAVE_LOCK
+#define TEGRA_PMX_PINS_HAVE_OD
+#define TEGRA_PMX_PINS_HAVE_E_IO_HV
+#include <asm/arch-tegra/pinmux.h>
+
+#endif /* _TEGRA210_PINMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/powergate.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/powergate.h
new file mode 100644
index 000000000..ec8f518dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/powergate.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2014-2015 NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef _TEGRA210_POWERGATE_H_
+#define _TEGRA210_POWERGATE_H_
+
+#include <asm/arch-tegra/powergate.h>
+
+#endif /* _TEGRA210_POWERGATE_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/sysctr.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/sysctr.h
new file mode 100644
index 000000000..cb1c4997f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/sysctr.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA210_SYSCTR_H_
+#define _TEGRA210_SYSCTR_H_
+
+struct sysctr_ctlr {
+	u32 cntcr;		/* 0x00: SYSCTR0_CNTCR Counter Control */
+	u32 cntsr;		/* 0x04: SYSCTR0_CNTSR Counter Status */
+	u32 cntcv0;		/* 0x08: SYSCTR0_CNTCV0 Counter Count 31:00 */
+	u32 cntcv1;		/* 0x0C: SYSCTR0_CNTCV1 Counter Count 63:32 */
+	u32 reserved1[4];	/* 0x10 - 0x1C */
+	u32 cntfid0;		/* 0x20: SYSCTR0_CNTFID0 Freq Table Entry */
+	u32 cntfid1;		/* 0x24: SYSCTR0_CNTFID1 Freq Table End */
+	u32 reserved2[1002];	/* 0x28 - 0xFCC */
+	u32 counterid[12];	/* 0xFD0 - 0xFxx CounterID regs, RO */
+};
+
+#define TSC_CNTCR_ENABLE	(1 << 0)	/* Enable */
+#define TSC_CNTCR_HDBG		(1 << 1)	/* Halt on debug */
+
+#endif	/* _TEGRA210_SYSCTR_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra210/tegra.h b/roms/u-boot/arch/arm/include/asm/arch-tegra210/tegra.h
new file mode 100644
index 000000000..1c6fba64c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra210/tegra.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA210_TEGRA_H_
+#define _TEGRA210_TEGRA_H_
+
+#define GICD_BASE		0x50041000	/* Generic Int Cntrlr Distrib */
+#define GICC_BASE		0x50042000	/* Generic Int Cntrlr CPU I/F */
+#define NV_PA_AHB_BASE		0x6000C000	/* System regs (AHB, etc.) */
+#define NV_PA_TSC_BASE		0x700F0000	/* System Counter TSC regs */
+#define NV_PA_MC_BASE		0x70019000	/* Mem Ctlr regs (MCB, etc.) */
+#define NV_PA_SDRAM_BASE	0x80000000
+
+#include <asm/arch-tegra/tegra.h>
+
+#define BCT_ODMDATA_OFFSET	1288	/* offset to ODMDATA word */
+
+#undef NVBOOTINFOTABLE_BCTSIZE
+#undef NVBOOTINFOTABLE_BCTPTR
+#define NVBOOTINFOTABLE_BCTSIZE	0x48	/* BCT size in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTPTR	0x4C	/* BCT pointer in BIT in IRAM */
+
+#define MAX_NUM_CPU		4
+#define MCB_EMEM_ARB_OVERRIDE	(NV_PA_MC_BASE + 0xE8)
+
+#define TEGRA_USB1_BASE		0x7D000000
+
+#endif /* _TEGRA210_TEGRA_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/clock-tables.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/clock-tables.h
new file mode 100644
index 000000000..8588009c6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/clock-tables.h
@@ -0,0 +1,372 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra30 clock PLL tables */
+
+#ifndef _TEGRA30_CLOCK_TABLES_H_
+#define _TEGRA30_CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+	CLOCK_ID_FIRST,
+	CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+	CLOCK_ID_MEMORY,
+	CLOCK_ID_PERIPH,
+	CLOCK_ID_AUDIO,
+	CLOCK_ID_USB,
+	CLOCK_ID_DISPLAY,
+
+	/* now the simple ones */
+	CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_EPCI,
+	CLOCK_ID_SFROM32KHZ,
+
+	/* These are the base clocks (inputs to the Tegra SOC) */
+	CLOCK_ID_32KHZ,
+	CLOCK_ID_OSC,
+	CLOCK_ID_CLK_M,
+
+	CLOCK_ID_COUNT,	/* number of PLLs */
+	CLOCK_ID_DISPLAY2,	/* Tegra3, placeholder */
+	CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+	PERIPH_ID_FIRST,
+
+	/* Low word: 31:0 */
+	PERIPH_ID_CPU = PERIPH_ID_FIRST,
+	PERIPH_ID_COP,
+	PERIPH_ID_TRIGSYS,
+	PERIPH_ID_RESERVED3,
+	PERIPH_ID_RESERVED4,
+	PERIPH_ID_TMR,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+
+	/* 8 */
+	PERIPH_ID_GPIO,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SPDIF,
+	PERIPH_ID_I2S1,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_NDFLASH,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC4,
+
+	/* 16 */
+	PERIPH_ID_RESERVED16,
+	PERIPH_ID_PWM,
+	PERIPH_ID_I2S2,
+	PERIPH_ID_EPP,
+	PERIPH_ID_VI,
+	PERIPH_ID_2D,
+	PERIPH_ID_USBD,
+	PERIPH_ID_ISP,
+
+	/* 24 */
+	PERIPH_ID_3D,
+	PERIPH_ID_RESERVED24,
+	PERIPH_ID_DISP2,
+	PERIPH_ID_DISP1,
+	PERIPH_ID_HOST1X,
+	PERIPH_ID_VCP,
+	PERIPH_ID_I2S0,
+	PERIPH_ID_CACHE2,
+
+	/* Middle word: 63:32 */
+	PERIPH_ID_MEM,
+	PERIPH_ID_AHBDMA,
+	PERIPH_ID_APBDMA,
+	PERIPH_ID_RESERVED35,
+	PERIPH_ID_KBC,
+	PERIPH_ID_STAT_MON,
+	PERIPH_ID_PMC,
+	PERIPH_ID_FUSE,
+
+	/* 40 */
+	PERIPH_ID_KFUSE,
+	PERIPH_ID_SBC1,
+	PERIPH_ID_SNOR,
+	PERIPH_ID_RESERVED43,
+	PERIPH_ID_SBC2,
+	PERIPH_ID_RESERVED45,
+	PERIPH_ID_SBC3,
+	PERIPH_ID_DVC_I2C,
+
+	/* 48 */
+	PERIPH_ID_DSI,
+	PERIPH_ID_TVO,
+	PERIPH_ID_MIPI,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_CSI,
+	PERIPH_ID_TVDAC,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_UART3,
+
+	/* 56 */
+	PERIPH_ID_RESERVED56,
+	PERIPH_ID_EMC,
+	PERIPH_ID_USB2,
+	PERIPH_ID_USB3,
+	PERIPH_ID_MPE,
+	PERIPH_ID_VDE,
+	PERIPH_ID_BSEA,
+	PERIPH_ID_BSEV,
+
+	/* Upper word 95:64 */
+	PERIPH_ID_SPEEDO,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_SBC4,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_PCIE,
+	PERIPH_ID_OWR,
+
+	/* 72 */
+	PERIPH_ID_AFI,
+	PERIPH_ID_CORESIGHT,
+	PERIPH_ID_PCIEXCLK,
+	PERIPH_ID_AVPUCQ,
+	PERIPH_ID_RESERVED76,
+	PERIPH_ID_RESERVED77,
+	PERIPH_ID_RESERVED78,
+	PERIPH_ID_DTV,
+
+	/* 80 */
+	PERIPH_ID_NANDSPEED,
+	PERIPH_ID_I2CSLOW,
+	PERIPH_ID_DSIB,
+	PERIPH_ID_RESERVED83,
+	PERIPH_ID_IRAMA,
+	PERIPH_ID_IRAMB,
+	PERIPH_ID_IRAMC,
+	PERIPH_ID_IRAMD,
+
+	/* 88 */
+	PERIPH_ID_CRAM2,
+	PERIPH_ID_RESERVED89,
+	PERIPH_ID_MDOUBLER,
+	PERIPH_ID_RESERVED91,
+	PERIPH_ID_SUSOUT,
+	PERIPH_ID_RESERVED93,
+	PERIPH_ID_RESERVED94,
+	PERIPH_ID_RESERVED95,
+
+	PERIPH_ID_VW_FIRST,
+	/* V word: 31:0 */
+	PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST,
+	PERIPH_ID_CPULP,
+	PERIPH_ID_3D2,
+	PERIPH_ID_MSELECT,
+	PERIPH_ID_TSENSOR,
+	PERIPH_ID_I2S3,
+	PERIPH_ID_I2S4,
+	PERIPH_ID_I2C4,
+
+	/* 08 */
+	PERIPH_ID_SBC5,
+	PERIPH_ID_SBC6,
+	PERIPH_ID_AUDIO,
+	PERIPH_ID_APBIF,
+	PERIPH_ID_DAM0,
+	PERIPH_ID_DAM1,
+	PERIPH_ID_DAM2,
+	PERIPH_ID_HDA2CODEC2X,
+
+	/* 16 */
+	PERIPH_ID_ATOMICS,
+	PERIPH_ID_EX_RESERVED17,
+	PERIPH_ID_EX_RESERVED18,
+	PERIPH_ID_EX_RESERVED19,
+	PERIPH_ID_EX_RESERVED20,
+	PERIPH_ID_EX_RESERVED21,
+	PERIPH_ID_EX_RESERVED22,
+	PERIPH_ID_ACTMON,
+
+	/* 24 */
+	PERIPH_ID_EX_RESERVED24,
+	PERIPH_ID_EX_RESERVED25,
+	PERIPH_ID_EX_RESERVED26,
+	PERIPH_ID_EX_RESERVED27,
+	PERIPH_ID_SATA,
+	PERIPH_ID_HDA,
+	PERIPH_ID_EX_RESERVED30,
+	PERIPH_ID_EX_RESERVED31,
+
+	/* W word: 31:0 */
+	PERIPH_ID_HDA2HDMICODEC,
+	PERIPH_ID_SATACOLD,
+	PERIPH_ID_RESERVED0_PCIERX0,
+	PERIPH_ID_RESERVED1_PCIERX1,
+	PERIPH_ID_RESERVED2_PCIERX2,
+	PERIPH_ID_RESERVED3_PCIERX3,
+	PERIPH_ID_RESERVED4_PCIERX4,
+	PERIPH_ID_RESERVED5_PCIERX5,
+
+	/* 40 */
+	PERIPH_ID_CEC,
+	PERIPH_ID_RESERVED6_PCIE2,
+	PERIPH_ID_RESERVED7_EMC,
+	PERIPH_ID_RESERVED8_HDMI,
+	PERIPH_ID_RESERVED9_SATA,
+	PERIPH_ID_RESERVED10_MIPI,
+	PERIPH_ID_EX_RESERVED46,
+	PERIPH_ID_EX_RESERVED47,
+
+	PERIPH_ID_COUNT,
+	PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+	PLL_OUT1,
+	PLL_OUT2,
+	PLL_OUT3,
+	PLL_OUT4
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ */
+enum periphc_internal_id {
+	/* 0x00 */
+	PERIPHC_I2S1,
+	PERIPHC_I2S2,
+	PERIPHC_SPDIF_OUT,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_PWM,
+	PERIPHC_05h,
+	PERIPHC_SBC2,
+	PERIPHC_SBC3,
+
+	/* 0x08 */
+	PERIPHC_08h,
+	PERIPHC_I2C1,
+	PERIPHC_DVC_I2C,
+	PERIPHC_0bh,
+	PERIPHC_0ch,
+	PERIPHC_SBC1,
+	PERIPHC_DISP1,
+	PERIPHC_DISP2,
+
+	/* 0x10 */
+	PERIPHC_CVE,
+	PERIPHC_11h,
+	PERIPHC_VI,
+	PERIPHC_13h,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC2,
+	PERIPHC_G3D,
+	PERIPHC_G2D,
+
+	/* 0x18 */
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC4,
+	PERIPHC_VFIR,
+	PERIPHC_EPP,
+	PERIPHC_MPE,
+	PERIPHC_MIPI,
+	PERIPHC_UART1,
+	PERIPHC_UART2,
+
+	/* 0x20 */
+	PERIPHC_HOST1X,
+	PERIPHC_21h,
+	PERIPHC_TVO,
+	PERIPHC_HDMI,
+	PERIPHC_24h,
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_EMC,
+
+	/* 0x28 */
+	PERIPHC_UART3,
+	PERIPHC_29h,
+	PERIPHC_VI_SENSOR,
+	PERIPHC_2bh,
+	PERIPHC_2ch,
+	PERIPHC_SBC4,
+	PERIPHC_I2C3,
+	PERIPHC_SDMMC3,
+
+	/* 0x30 */
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_VDE,
+	PERIPHC_OWR,
+	PERIPHC_NOR,
+	PERIPHC_CSITE,
+	PERIPHC_I2S0,
+	PERIPHC_37h,
+
+	PERIPHC_VW_FIRST,
+	/* 0x38 */
+	PERIPHC_G3D2 = PERIPHC_VW_FIRST,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+
+	/* 0x40 */
+	PERIPHC_AUDIO,
+	PERIPHC_41h,
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+	PERIPHC_ACTMON,
+	PERIPHC_EXTPERIPH1,
+
+	/* 0x48 */
+	PERIPHC_EXTPERIPH2,
+	PERIPHC_EXTPERIPH3,
+	PERIPHC_NANDSPEED,
+	PERIPHC_I2CSLOW,
+	PERIPHC_SYS,
+	PERIPHC_SPEEDO,
+	PERIPHC_4eh,
+	PERIPHC_4fh,
+
+	/* 0x50 */
+	PERIPHC_50h,
+	PERIPHC_51h,
+	PERIPHC_52h,
+	PERIPHC_53h,
+	PERIPHC_SATAOOB,
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+
+	PERIPHC_COUNT,
+
+	PERIPHC_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */
+#define PERIPH_REG(id) \
+	(id < PERIPH_ID_VW_FIRST) ? \
+		((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+		(id) < PERIPH_ID_COUNT)
+
+#endif	/* _TEGRA30_CLOCK_TABLES_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/clock.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/clock.h
new file mode 100644
index 000000000..7f5a115bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/clock.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra30 clock control functions */
+
+#ifndef _TEGRA30_CLOCK_H_
+#define _TEGRA30_CLOCK_H_
+
+#include <asm/arch-tegra/clock.h>
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT          28
+#define OSC_FREQ_MASK           (0xF << OSC_FREQ_SHIFT)
+
+int tegra_plle_enable(void);
+
+#endif	/* _TEGRA30_CLOCK_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/flow.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/flow.h
new file mode 100644
index 000000000..f3e947e9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/flow.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA30_FLOW_H_
+#define _TEGRA30_FLOW_H_
+
+struct flow_ctlr {
+	u32 halt_cpu_events;
+	u32 halt_cop_events;
+	u32 cpu_csr;
+	u32 cop_csr;
+	u32 xrq_events;
+	u32 halt_cpu1_events;
+	u32 cpu1_csr;
+	u32 halt_cpu2_events;
+	u32 cpu2_csr;
+	u32 halt_cpu3_events;
+	u32 cpu3_csr;
+	u32 cluster_control;
+};
+
+#endif	/* _TEGRA30_FLOW_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/funcmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/funcmux.h
new file mode 100644
index 000000000..2e8b33591
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/funcmux.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra30 high-level function multiplexing */
+
+#ifndef _TEGRA30_FUNCMUX_H_
+#define _TEGRA30_FUNCMUX_H_
+
+#include <asm/arch-tegra/funcmux.h>
+
+/* Configs supported by the func mux */
+enum {
+	FUNCMUX_DEFAULT = 0,	/* default config */
+
+	/* UART configs */
+	FUNCMUX_UART1_ULPI = 0,
+};
+#endif	/* _TEGRA30_FUNCMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/gp_padctrl.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
new file mode 100644
index 000000000..4ff785de8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA30_GP_PADCTRL_H_
+#define _TEGRA30_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+	u32	modereg;	/* 0x00: APB_MISC_GP_MODEREG */
+	u32	hidrev;		/* 0x04: APB_MISC_GP_HIDREV */
+	u32	reserved0[22];	/* 0x08 - 0x5C: */
+	u32	emu_revid;	/* 0x60: APB_MISC_GP_EMU_REVID */
+	u32	xactor_scratch;	/* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+	u32	aocfg1;		/* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+	u32	aocfg2;		/* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
+	u32	atcfg1;		/* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+	u32	atcfg2;		/* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+	u32	atcfg3;		/* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
+	u32	atcfg4;		/* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */
+	u32	atcfg5;		/* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
+	u32	cdev1cfg;	/* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
+	u32	cdev2cfg;	/* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
+	u32	csuscfg;	/* 0x8C: APB_MISC_GP_CSUSCFGPADCTRL */
+	u32	dap1cfg;	/* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
+	u32	dap2cfg;	/* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
+	u32	dap3cfg;	/* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
+	u32	dap4cfg;	/* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
+	u32	dbgcfg;		/* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
+	u32	lcdcfg1;	/* 0xA4: APB_MISC_GP_LCDCFG1PADCTRL */
+	u32	lcdcfg2;	/* 0xA8: APB_MISC_GP_LCDCFG2PADCTRL */
+	u32	sdio2cfg;	/* 0xAC: APB_MISC_GP_SDIO2CFGPADCTRL */
+	u32	sdio3cfg;	/* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
+	u32	spicfg;		/* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
+	u32	uaacfg;		/* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
+	u32	uabcfg;		/* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
+	u32	uart2cfg;	/* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
+	u32	uart3cfg;	/* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
+	u32	vicfg1;		/* 0xC8: APB_MISC_GP_VICFG1PADCTRL */
+	u32	vivttgen;	/* 0xCC: APB_MISC_GP_VIVTTGENPADCTRL */
+	u32	reserved1[7];	/* 0xD0-0xE8: */
+	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+};
+
+/* SDMMC1/3 settings from section 24.6 of T30 TRM */
+#define SDIOCFG_DRVUP_SLWF	1
+#define SDIOCFG_DRVDN_SLWR	1
+#define SDIOCFG_DRVUP		0x2E
+#define SDIOCFG_DRVDN		0x2A
+
+#endif	/* _TEGRA30_GP_PADCTRL_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/gpio.h
new file mode 100644
index 000000000..1dd2e426b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/gpio.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA30_GPIO_H_
+#define _TEGRA30_GPIO_H_
+
+/*
+ * The Tegra 3x GPIO controller has 246 GPIOS in 8 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS	4	/* number of ports per bank */
+#define TEGRA_GPIO_BANKS	8	/* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+	uint gpio_config[TEGRA_GPIO_PORTS];
+	uint gpio_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_out[TEGRA_GPIO_PORTS];
+	uint gpio_in[TEGRA_GPIO_PORTS];
+	uint gpio_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_int_clear[TEGRA_GPIO_PORTS];
+	uint gpio_masked_config[TEGRA_GPIO_PORTS];
+	uint gpio_masked_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_in[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+	struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+#endif	/* _TEGRA30_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/mc.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/mc.h
new file mode 100644
index 000000000..bbb0fe77b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/mc.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  (C) Copyright 2014
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _TEGRA30_MC_H_
+#define _TEGRA30_MC_H_
+
+/**
+ * Defines the memory controller registers we need/care about
+ */
+struct mc_ctlr {
+	u32 reserved0[4];			/* offset 0x00 - 0x0C */
+	u32 mc_smmu_config;			/* offset 0x10 */
+	u32 mc_smmu_tlb_config;			/* offset 0x14 */
+	u32 mc_smmu_ptc_config;			/* offset 0x18 */
+	u32 mc_smmu_ptb_asid;			/* offset 0x1C */
+	u32 mc_smmu_ptb_data;			/* offset 0x20 */
+	u32 reserved1[3];			/* offset 0x24 - 0x2C */
+	u32 mc_smmu_tlb_flush;			/* offset 0x30 */
+	u32 mc_smmu_ptc_flush;			/* offset 0x34 */
+	u32 mc_smmu_asid_security;		/* offset 0x38 */
+	u32 reserved2[5];			/* offset 0x3C - 0x4C */
+	u32 mc_emem_cfg;			/* offset 0x50 */
+	u32 mc_emem_adr_cfg;			/* offset 0x54 */
+	u32 mc_emem_adr_cfg_dev0;		/* offset 0x58 */
+	u32 mc_emem_adr_cfg_dev1;		/* offset 0x5C */
+	u32 reserved3[12];			/* offset 0x60 - 0x8C */
+	u32 mc_emem_arb_reserved[28];		/* offset 0x90 - 0xFC */
+	u32 reserved4[338];			/* offset 0x100 - 0x644 */
+	u32 mc_video_protect_bom;		/* offset 0x648 */
+	u32 mc_video_protect_size_mb;		/* offset 0x64c */
+	u32 mc_video_protect_reg_ctrl;		/* offset 0x650 */
+};
+
+#endif	/* _TEGRA30_MC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/pinmux.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/pinmux.h
new file mode 100644
index 000000000..1261943f5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/pinmux.h
@@ -0,0 +1,404 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef _TEGRA30_PINMUX_H_
+#define _TEGRA30_PINMUX_H_
+
+enum pmux_pingrp {
+	PMUX_PINGRP_ULPI_DATA0_PO1,
+	PMUX_PINGRP_ULPI_DATA1_PO2,
+	PMUX_PINGRP_ULPI_DATA2_PO3,
+	PMUX_PINGRP_ULPI_DATA3_PO4,
+	PMUX_PINGRP_ULPI_DATA4_PO5,
+	PMUX_PINGRP_ULPI_DATA5_PO6,
+	PMUX_PINGRP_ULPI_DATA6_PO7,
+	PMUX_PINGRP_ULPI_DATA7_PO0,
+	PMUX_PINGRP_ULPI_CLK_PY0,
+	PMUX_PINGRP_ULPI_DIR_PY1,
+	PMUX_PINGRP_ULPI_NXT_PY2,
+	PMUX_PINGRP_ULPI_STP_PY3,
+	PMUX_PINGRP_DAP3_FS_PP0,
+	PMUX_PINGRP_DAP3_DIN_PP1,
+	PMUX_PINGRP_DAP3_DOUT_PP2,
+	PMUX_PINGRP_DAP3_SCLK_PP3,
+	PMUX_PINGRP_PV0,
+	PMUX_PINGRP_PV1,
+	PMUX_PINGRP_SDMMC1_CLK_PZ0,
+	PMUX_PINGRP_SDMMC1_CMD_PZ1,
+	PMUX_PINGRP_SDMMC1_DAT3_PY4,
+	PMUX_PINGRP_SDMMC1_DAT2_PY5,
+	PMUX_PINGRP_SDMMC1_DAT1_PY6,
+	PMUX_PINGRP_SDMMC1_DAT0_PY7,
+	PMUX_PINGRP_PV2,
+	PMUX_PINGRP_PV3,
+	PMUX_PINGRP_CLK2_OUT_PW5,
+	PMUX_PINGRP_CLK2_REQ_PCC5,
+	PMUX_PINGRP_LCD_PWR1_PC1,
+	PMUX_PINGRP_LCD_PWR2_PC6,
+	PMUX_PINGRP_LCD_SDIN_PZ2,
+	PMUX_PINGRP_LCD_SDOUT_PN5,
+	PMUX_PINGRP_LCD_WR_N_PZ3,
+	PMUX_PINGRP_LCD_CS0_N_PN4,
+	PMUX_PINGRP_LCD_DC0_PN6,
+	PMUX_PINGRP_LCD_SCK_PZ4,
+	PMUX_PINGRP_LCD_PWR0_PB2,
+	PMUX_PINGRP_LCD_PCLK_PB3,
+	PMUX_PINGRP_LCD_DE_PJ1,
+	PMUX_PINGRP_LCD_HSYNC_PJ3,
+	PMUX_PINGRP_LCD_VSYNC_PJ4,
+	PMUX_PINGRP_LCD_D0_PE0,
+	PMUX_PINGRP_LCD_D1_PE1,
+	PMUX_PINGRP_LCD_D2_PE2,
+	PMUX_PINGRP_LCD_D3_PE3,
+	PMUX_PINGRP_LCD_D4_PE4,
+	PMUX_PINGRP_LCD_D5_PE5,
+	PMUX_PINGRP_LCD_D6_PE6,
+	PMUX_PINGRP_LCD_D7_PE7,
+	PMUX_PINGRP_LCD_D8_PF0,
+	PMUX_PINGRP_LCD_D9_PF1,
+	PMUX_PINGRP_LCD_D10_PF2,
+	PMUX_PINGRP_LCD_D11_PF3,
+	PMUX_PINGRP_LCD_D12_PF4,
+	PMUX_PINGRP_LCD_D13_PF5,
+	PMUX_PINGRP_LCD_D14_PF6,
+	PMUX_PINGRP_LCD_D15_PF7,
+	PMUX_PINGRP_LCD_D16_PM0,
+	PMUX_PINGRP_LCD_D17_PM1,
+	PMUX_PINGRP_LCD_D18_PM2,
+	PMUX_PINGRP_LCD_D19_PM3,
+	PMUX_PINGRP_LCD_D20_PM4,
+	PMUX_PINGRP_LCD_D21_PM5,
+	PMUX_PINGRP_LCD_D22_PM6,
+	PMUX_PINGRP_LCD_D23_PM7,
+	PMUX_PINGRP_LCD_CS1_N_PW0,
+	PMUX_PINGRP_LCD_M1_PW1,
+	PMUX_PINGRP_LCD_DC1_PD2,
+	PMUX_PINGRP_HDMI_INT_PN7,
+	PMUX_PINGRP_DDC_SCL_PV4,
+	PMUX_PINGRP_DDC_SDA_PV5,
+	PMUX_PINGRP_CRT_HSYNC_PV6,
+	PMUX_PINGRP_CRT_VSYNC_PV7,
+	PMUX_PINGRP_VI_D0_PT4,
+	PMUX_PINGRP_VI_D1_PD5,
+	PMUX_PINGRP_VI_D2_PL0,
+	PMUX_PINGRP_VI_D3_PL1,
+	PMUX_PINGRP_VI_D4_PL2,
+	PMUX_PINGRP_VI_D5_PL3,
+	PMUX_PINGRP_VI_D6_PL4,
+	PMUX_PINGRP_VI_D7_PL5,
+	PMUX_PINGRP_VI_D8_PL6,
+	PMUX_PINGRP_VI_D9_PL7,
+	PMUX_PINGRP_VI_D10_PT2,
+	PMUX_PINGRP_VI_D11_PT3,
+	PMUX_PINGRP_VI_PCLK_PT0,
+	PMUX_PINGRP_VI_MCLK_PT1,
+	PMUX_PINGRP_VI_VSYNC_PD6,
+	PMUX_PINGRP_VI_HSYNC_PD7,
+	PMUX_PINGRP_UART2_RXD_PC3,
+	PMUX_PINGRP_UART2_TXD_PC2,
+	PMUX_PINGRP_UART2_RTS_N_PJ6,
+	PMUX_PINGRP_UART2_CTS_N_PJ5,
+	PMUX_PINGRP_UART3_TXD_PW6,
+	PMUX_PINGRP_UART3_RXD_PW7,
+	PMUX_PINGRP_UART3_CTS_N_PA1,
+	PMUX_PINGRP_UART3_RTS_N_PC0,
+	PMUX_PINGRP_PU0,
+	PMUX_PINGRP_PU1,
+	PMUX_PINGRP_PU2,
+	PMUX_PINGRP_PU3,
+	PMUX_PINGRP_PU4,
+	PMUX_PINGRP_PU5,
+	PMUX_PINGRP_PU6,
+	PMUX_PINGRP_GEN1_I2C_SDA_PC5,
+	PMUX_PINGRP_GEN1_I2C_SCL_PC4,
+	PMUX_PINGRP_DAP4_FS_PP4,
+	PMUX_PINGRP_DAP4_DIN_PP5,
+	PMUX_PINGRP_DAP4_DOUT_PP6,
+	PMUX_PINGRP_DAP4_SCLK_PP7,
+	PMUX_PINGRP_CLK3_OUT_PEE0,
+	PMUX_PINGRP_CLK3_REQ_PEE1,
+	PMUX_PINGRP_GMI_WP_N_PC7,
+	PMUX_PINGRP_GMI_IORDY_PI5,
+	PMUX_PINGRP_GMI_WAIT_PI7,
+	PMUX_PINGRP_GMI_ADV_N_PK0,
+	PMUX_PINGRP_GMI_CLK_PK1,
+	PMUX_PINGRP_GMI_CS0_N_PJ0,
+	PMUX_PINGRP_GMI_CS1_N_PJ2,
+	PMUX_PINGRP_GMI_CS2_N_PK3,
+	PMUX_PINGRP_GMI_CS3_N_PK4,
+	PMUX_PINGRP_GMI_CS4_N_PK2,
+	PMUX_PINGRP_GMI_CS6_N_PI3,
+	PMUX_PINGRP_GMI_CS7_N_PI6,
+	PMUX_PINGRP_GMI_AD0_PG0,
+	PMUX_PINGRP_GMI_AD1_PG1,
+	PMUX_PINGRP_GMI_AD2_PG2,
+	PMUX_PINGRP_GMI_AD3_PG3,
+	PMUX_PINGRP_GMI_AD4_PG4,
+	PMUX_PINGRP_GMI_AD5_PG5,
+	PMUX_PINGRP_GMI_AD6_PG6,
+	PMUX_PINGRP_GMI_AD7_PG7,
+	PMUX_PINGRP_GMI_AD8_PH0,
+	PMUX_PINGRP_GMI_AD9_PH1,
+	PMUX_PINGRP_GMI_AD10_PH2,
+	PMUX_PINGRP_GMI_AD11_PH3,
+	PMUX_PINGRP_GMI_AD12_PH4,
+	PMUX_PINGRP_GMI_AD13_PH5,
+	PMUX_PINGRP_GMI_AD14_PH6,
+	PMUX_PINGRP_GMI_AD15_PH7,
+	PMUX_PINGRP_GMI_A16_PJ7,
+	PMUX_PINGRP_GMI_A17_PB0,
+	PMUX_PINGRP_GMI_A18_PB1,
+	PMUX_PINGRP_GMI_A19_PK7,
+	PMUX_PINGRP_GMI_WR_N_PI0,
+	PMUX_PINGRP_GMI_OE_N_PI1,
+	PMUX_PINGRP_GMI_DQS_PI2,
+	PMUX_PINGRP_GMI_RST_N_PI4,
+	PMUX_PINGRP_GEN2_I2C_SCL_PT5,
+	PMUX_PINGRP_GEN2_I2C_SDA_PT6,
+	PMUX_PINGRP_SDMMC4_CLK_PCC4,
+	PMUX_PINGRP_SDMMC4_CMD_PT7,
+	PMUX_PINGRP_SDMMC4_DAT0_PAA0,
+	PMUX_PINGRP_SDMMC4_DAT1_PAA1,
+	PMUX_PINGRP_SDMMC4_DAT2_PAA2,
+	PMUX_PINGRP_SDMMC4_DAT3_PAA3,
+	PMUX_PINGRP_SDMMC4_DAT4_PAA4,
+	PMUX_PINGRP_SDMMC4_DAT5_PAA5,
+	PMUX_PINGRP_SDMMC4_DAT6_PAA6,
+	PMUX_PINGRP_SDMMC4_DAT7_PAA7,
+	PMUX_PINGRP_SDMMC4_RST_N_PCC3,
+	PMUX_PINGRP_CAM_MCLK_PCC0,
+	PMUX_PINGRP_PCC1,
+	PMUX_PINGRP_PBB0,
+	PMUX_PINGRP_CAM_I2C_SCL_PBB1,
+	PMUX_PINGRP_CAM_I2C_SDA_PBB2,
+	PMUX_PINGRP_PBB3,
+	PMUX_PINGRP_PBB4,
+	PMUX_PINGRP_PBB5,
+	PMUX_PINGRP_PBB6,
+	PMUX_PINGRP_PBB7,
+	PMUX_PINGRP_PCC2,
+	PMUX_PINGRP_JTAG_RTCK_PU7,
+	PMUX_PINGRP_PWR_I2C_SCL_PZ6,
+	PMUX_PINGRP_PWR_I2C_SDA_PZ7,
+	PMUX_PINGRP_KB_ROW0_PR0,
+	PMUX_PINGRP_KB_ROW1_PR1,
+	PMUX_PINGRP_KB_ROW2_PR2,
+	PMUX_PINGRP_KB_ROW3_PR3,
+	PMUX_PINGRP_KB_ROW4_PR4,
+	PMUX_PINGRP_KB_ROW5_PR5,
+	PMUX_PINGRP_KB_ROW6_PR6,
+	PMUX_PINGRP_KB_ROW7_PR7,
+	PMUX_PINGRP_KB_ROW8_PS0,
+	PMUX_PINGRP_KB_ROW9_PS1,
+	PMUX_PINGRP_KB_ROW10_PS2,
+	PMUX_PINGRP_KB_ROW11_PS3,
+	PMUX_PINGRP_KB_ROW12_PS4,
+	PMUX_PINGRP_KB_ROW13_PS5,
+	PMUX_PINGRP_KB_ROW14_PS6,
+	PMUX_PINGRP_KB_ROW15_PS7,
+	PMUX_PINGRP_KB_COL0_PQ0,
+	PMUX_PINGRP_KB_COL1_PQ1,
+	PMUX_PINGRP_KB_COL2_PQ2,
+	PMUX_PINGRP_KB_COL3_PQ3,
+	PMUX_PINGRP_KB_COL4_PQ4,
+	PMUX_PINGRP_KB_COL5_PQ5,
+	PMUX_PINGRP_KB_COL6_PQ6,
+	PMUX_PINGRP_KB_COL7_PQ7,
+	PMUX_PINGRP_CLK_32K_OUT_PA0,
+	PMUX_PINGRP_SYS_CLK_REQ_PZ5,
+	PMUX_PINGRP_CORE_PWR_REQ,
+	PMUX_PINGRP_CPU_PWR_REQ,
+	PMUX_PINGRP_PWR_INT_N,
+	PMUX_PINGRP_CLK_32K_IN,
+	PMUX_PINGRP_OWR,
+	PMUX_PINGRP_DAP1_FS_PN0,
+	PMUX_PINGRP_DAP1_DIN_PN1,
+	PMUX_PINGRP_DAP1_DOUT_PN2,
+	PMUX_PINGRP_DAP1_SCLK_PN3,
+	PMUX_PINGRP_CLK1_REQ_PEE2,
+	PMUX_PINGRP_CLK1_OUT_PW4,
+	PMUX_PINGRP_SPDIF_IN_PK6,
+	PMUX_PINGRP_SPDIF_OUT_PK5,
+	PMUX_PINGRP_DAP2_FS_PA2,
+	PMUX_PINGRP_DAP2_DIN_PA4,
+	PMUX_PINGRP_DAP2_DOUT_PA5,
+	PMUX_PINGRP_DAP2_SCLK_PA3,
+	PMUX_PINGRP_SPI2_MOSI_PX0,
+	PMUX_PINGRP_SPI2_MISO_PX1,
+	PMUX_PINGRP_SPI2_CS0_N_PX3,
+	PMUX_PINGRP_SPI2_SCK_PX2,
+	PMUX_PINGRP_SPI1_MOSI_PX4,
+	PMUX_PINGRP_SPI1_SCK_PX5,
+	PMUX_PINGRP_SPI1_CS0_N_PX6,
+	PMUX_PINGRP_SPI1_MISO_PX7,
+	PMUX_PINGRP_SPI2_CS1_N_PW2,
+	PMUX_PINGRP_SPI2_CS2_N_PW3,
+	PMUX_PINGRP_SDMMC3_CLK_PA6,
+	PMUX_PINGRP_SDMMC3_CMD_PA7,
+	PMUX_PINGRP_SDMMC3_DAT0_PB7,
+	PMUX_PINGRP_SDMMC3_DAT1_PB6,
+	PMUX_PINGRP_SDMMC3_DAT2_PB5,
+	PMUX_PINGRP_SDMMC3_DAT3_PB4,
+	PMUX_PINGRP_SDMMC3_DAT4_PD1,
+	PMUX_PINGRP_SDMMC3_DAT5_PD0,
+	PMUX_PINGRP_SDMMC3_DAT6_PD3,
+	PMUX_PINGRP_SDMMC3_DAT7_PD4,
+	PMUX_PINGRP_PEX_L0_PRSNT_N_PDD0,
+	PMUX_PINGRP_PEX_L0_RST_N_PDD1,
+	PMUX_PINGRP_PEX_L0_CLKREQ_N_PDD2,
+	PMUX_PINGRP_PEX_WAKE_N_PDD3,
+	PMUX_PINGRP_PEX_L1_PRSNT_N_PDD4,
+	PMUX_PINGRP_PEX_L1_RST_N_PDD5,
+	PMUX_PINGRP_PEX_L1_CLKREQ_N_PDD6,
+	PMUX_PINGRP_PEX_L2_PRSNT_N_PDD7,
+	PMUX_PINGRP_PEX_L2_RST_N_PCC6,
+	PMUX_PINGRP_PEX_L2_CLKREQ_N_PCC7,
+	PMUX_PINGRP_HDMI_CEC_PEE3,
+	PMUX_PINGRP_COUNT,
+};
+
+enum pmux_drvgrp {
+	PMUX_DRVGRP_AO1,
+	PMUX_DRVGRP_AO2,
+	PMUX_DRVGRP_AT1,
+	PMUX_DRVGRP_AT2,
+	PMUX_DRVGRP_AT3,
+	PMUX_DRVGRP_AT4,
+	PMUX_DRVGRP_AT5,
+	PMUX_DRVGRP_CDEV1,
+	PMUX_DRVGRP_CDEV2,
+	PMUX_DRVGRP_CSUS,
+	PMUX_DRVGRP_DAP1,
+	PMUX_DRVGRP_DAP2,
+	PMUX_DRVGRP_DAP3,
+	PMUX_DRVGRP_DAP4,
+	PMUX_DRVGRP_DBG,
+	PMUX_DRVGRP_LCD1,
+	PMUX_DRVGRP_LCD2,
+	PMUX_DRVGRP_SDIO2,
+	PMUX_DRVGRP_SDIO3,
+	PMUX_DRVGRP_SPI,
+	PMUX_DRVGRP_UAA,
+	PMUX_DRVGRP_UAB,
+	PMUX_DRVGRP_UART2,
+	PMUX_DRVGRP_UART3,
+	PMUX_DRVGRP_VI1,
+	PMUX_DRVGRP_SDIO1 = (0x84 / 4),
+	PMUX_DRVGRP_CRT = (0x90 / 4),
+	PMUX_DRVGRP_DDC,
+	PMUX_DRVGRP_GMA,
+	PMUX_DRVGRP_GMB,
+	PMUX_DRVGRP_GMC,
+	PMUX_DRVGRP_GMD,
+	PMUX_DRVGRP_GME,
+	PMUX_DRVGRP_GMF,
+	PMUX_DRVGRP_GMG,
+	PMUX_DRVGRP_GMH,
+	PMUX_DRVGRP_OWR,
+	PMUX_DRVGRP_UDA,
+	PMUX_DRVGRP_GPV,
+	PMUX_DRVGRP_DEV3,
+	PMUX_DRVGRP_CEC = (0xd0 / 4),
+	PMUX_DRVGRP_COUNT,
+};
+
+enum pmux_func {
+	PMUX_FUNC_DEFAULT,
+	PMUX_FUNC_BLINK,
+	PMUX_FUNC_CEC,
+	PMUX_FUNC_CLK_12M_OUT,
+	PMUX_FUNC_CLK_32K_IN,
+	PMUX_FUNC_CORE_PWR_REQ,
+	PMUX_FUNC_CPU_PWR_REQ,
+	PMUX_FUNC_CRT,
+	PMUX_FUNC_DAP,
+	PMUX_FUNC_DDR,
+	PMUX_FUNC_DEV3,
+	PMUX_FUNC_DISPLAYA,
+	PMUX_FUNC_DISPLAYB,
+	PMUX_FUNC_DTV,
+	PMUX_FUNC_EXTPERIPH1,
+	PMUX_FUNC_EXTPERIPH2,
+	PMUX_FUNC_EXTPERIPH3,
+	PMUX_FUNC_GMI,
+	PMUX_FUNC_GMI_ALT,
+	PMUX_FUNC_HDA,
+	PMUX_FUNC_HDCP,
+	PMUX_FUNC_HDMI,
+	PMUX_FUNC_HSI,
+	PMUX_FUNC_I2C1,
+	PMUX_FUNC_I2C2,
+	PMUX_FUNC_I2C3,
+	PMUX_FUNC_I2C4,
+	PMUX_FUNC_I2CPWR,
+	PMUX_FUNC_I2S0,
+	PMUX_FUNC_I2S1,
+	PMUX_FUNC_I2S2,
+	PMUX_FUNC_I2S3,
+	PMUX_FUNC_I2S4,
+	PMUX_FUNC_INVALID,
+	PMUX_FUNC_KBC,
+	PMUX_FUNC_MIO,
+	PMUX_FUNC_NAND,
+	PMUX_FUNC_NAND_ALT,
+	PMUX_FUNC_OWR,
+	PMUX_FUNC_PCIE,
+	PMUX_FUNC_PWM0,
+	PMUX_FUNC_PWM1,
+	PMUX_FUNC_PWM2,
+	PMUX_FUNC_PWM3,
+	PMUX_FUNC_PWR_INT_N,
+	PMUX_FUNC_RTCK,
+	PMUX_FUNC_SATA,
+	PMUX_FUNC_SDMMC1,
+	PMUX_FUNC_SDMMC2,
+	PMUX_FUNC_SDMMC3,
+	PMUX_FUNC_SDMMC4,
+	PMUX_FUNC_SPDIF,
+	PMUX_FUNC_SPI1,
+	PMUX_FUNC_SPI2,
+	PMUX_FUNC_SPI2_ALT,
+	PMUX_FUNC_SPI3,
+	PMUX_FUNC_SPI4,
+	PMUX_FUNC_SPI5,
+	PMUX_FUNC_SPI6,
+	PMUX_FUNC_SYSCLK,
+	PMUX_FUNC_TEST,
+	PMUX_FUNC_TRACE,
+	PMUX_FUNC_UARTA,
+	PMUX_FUNC_UARTB,
+	PMUX_FUNC_UARTC,
+	PMUX_FUNC_UARTD,
+	PMUX_FUNC_UARTE,
+	PMUX_FUNC_ULPI,
+	PMUX_FUNC_VGP1,
+	PMUX_FUNC_VGP2,
+	PMUX_FUNC_VGP3,
+	PMUX_FUNC_VGP4,
+	PMUX_FUNC_VGP5,
+	PMUX_FUNC_VGP6,
+	PMUX_FUNC_VI,
+	PMUX_FUNC_VI_ALT1,
+	PMUX_FUNC_VI_ALT2,
+	PMUX_FUNC_VI_ALT3,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_RSVD4,
+	PMUX_FUNC_COUNT,
+};
+
+#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x868
+#define TEGRA_PMX_SOC_HAS_DRVGRPS
+#define TEGRA_PMX_GRPS_HAVE_LPMD
+#define TEGRA_PMX_GRPS_HAVE_SCHMT
+#define TEGRA_PMX_GRPS_HAVE_HSM
+#define TEGRA_PMX_PINS_HAVE_E_INPUT
+#define TEGRA_PMX_PINS_HAVE_LOCK
+#define TEGRA_PMX_PINS_HAVE_OD
+#define TEGRA_PMX_PINS_HAVE_IO_RESET
+#include <asm/arch-tegra/pinmux.h>
+
+#endif /* _TEGRA30_PINMUX_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/powergate.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/powergate.h
new file mode 100644
index 000000000..c70e44b62
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/powergate.h
@@ -0,0 +1,6 @@
+#ifndef _TEGRA30_POWERGATE_H_
+#define _TEGRA30_POWERGATE_H_
+
+#include <asm/arch-tegra/powergate.h>
+
+#endif /* _TEGRA30_POWERGATE_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-tegra30/tegra.h b/roms/u-boot/arch/arm/include/asm/arch-tegra30/tegra.h
new file mode 100644
index 000000000..1de7d2ff2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-tegra30/tegra.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA30_H_
+#define _TEGRA30_H_
+
+#define NV_PA_MC_BASE		0x7000F000
+#define NV_PA_SDRAM_BASE	0x80000000	/* 0x80000000 for real T30 */
+
+#include <asm/arch-tegra/tegra.h>
+
+#define TEGRA_USB1_BASE		0x7D000000
+
+#define BCT_ODMDATA_OFFSET	6116	/* 12 bytes from end of BCT */
+
+#define MAX_NUM_CPU		4
+
+#endif	/* TEGRA30_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-vf610/clock.h b/roms/u-boot/arch/arm/include/asm/arch-vf610/clock.h
new file mode 100644
index 000000000..ec9786ce4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-vf610/clock.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_BUS_CLK,
+	MXC_IPG_CLK,
+	MXC_UART_CLK,
+	MXC_ESDHC_CLK,
+	MXC_FEC_CLK,
+	MXC_I2C_CLK,
+	MXC_DSPI_CLK,
+};
+
+void enable_ocotp_clk(unsigned char enable);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+u32 get_lpuart_clk(void);
+#ifdef CONFIG_SYS_I2C_MXC
+int enable_i2c_clk(unsigned char enable, unsigned int i2c_num);
+#endif
+
+#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK)
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-vf610/crm_regs.h b/roms/u-boot/arch/arm/include/asm/arch-vf610/crm_regs.h
new file mode 100644
index 000000000..0c9ed5293
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -0,0 +1,275 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ARCH_ARM_MACH_VF610_CCM_REGS_H__
+#define __ARCH_ARM_MACH_VF610_CCM_REGS_H__
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Clock Controller Module (CCM) */
+struct ccm_reg {
+	u32 ccr;
+	u32 csr;
+	u32 ccsr;
+	u32 cacrr;
+	u32 cscmr1;
+	u32 cscdr1;
+	u32 cscdr2;
+	u32 cscdr3;
+	u32 cscmr2;
+	u32 cscdr4;
+	u32 ctor;
+	u32 clpcr;
+	u32 cisr;
+	u32 cimr;
+	u32 ccosr;
+	u32 cgpr;
+	u32 ccgr0;
+	u32 ccgr1;
+	u32 ccgr2;
+	u32 ccgr3;
+	u32 ccgr4;
+	u32 ccgr5;
+	u32 ccgr6;
+	u32 ccgr7;
+	u32 ccgr8;
+	u32 ccgr9;
+	u32 ccgr10;
+	u32 ccgr11;
+	u32 cmeor0;
+	u32 cmeor1;
+	u32 cmeor2;
+	u32 cmeor3;
+	u32 cmeor4;
+	u32 cmeor5;
+	u32 cppdsr;
+	u32 ccowr;
+	u32 ccpgr0;
+	u32 ccpgr1;
+	u32 ccpgr2;
+	u32 ccpgr3;
+};
+
+/* Analog components control digital interface (ANADIG) */
+struct anadig_reg {
+	u32 reserved_0x000[4];
+	u32 pll3_ctrl;
+	u32 reserved_0x014[3];
+	u32 pll7_ctrl;
+	u32 reserved_0x024[3];
+	u32 pll2_ctrl;
+	u32 reserved_0x034[3];
+	u32 pll2_ss;
+	u32 reserved_0x044[3];
+	u32 pll2_num;
+	u32 reserved_0x054[3];
+	u32 pll2_denom;
+	u32 reserved_0x064[3];
+	u32 pll4_ctrl;
+	u32 reserved_0x074[3];
+	u32 pll4_num;
+	u32 reserved_0x084[3];
+	u32 pll4_denom;
+	u32 reserved_0x094[3];
+	u32 pll6_ctrl;
+	u32 reserved_0x0A4[3];
+	u32 pll6_num;
+	u32 reserved_0x0B4[3];
+	u32 pll6_denom;
+	u32 reserved_0x0C4[7];
+	u32 pll5_ctrl;
+	u32 reserved_0x0E4[3];
+	u32 pll3_pfd;
+	u32 reserved_0x0F4[3];
+	u32 pll2_pfd;
+	u32 reserved_0x104[3];
+	u32 reg_1p1;
+	u32 reserved_0x114[3];
+	u32 reg_3p0;
+	u32 reserved_0x124[3];
+	u32 reg_2p5;
+	u32 reserved_0x134[7];
+	u32 ana_misc0;
+	u32 reserved_0x154[3];
+	u32 ana_misc1;
+	u32 reserved_0x164[63];
+	u32 anadig_digprog;
+	u32 reserved_0x264[3];
+	u32 pll1_ctrl;
+	u32 reserved_0x274[3];
+	u32 pll1_ss;
+	u32 reserved_0x284[3];
+	u32 pll1_num;
+	u32 reserved_0x294[3];
+	u32 pll1_denom;
+	u32 reserved_0x2A4[3];
+	u32 pll1_pdf;
+	u32 reserved_0x2B4[3];
+	u32 pll_lock;
+};
+#endif
+
+#define CCM_CCR_FIRC_EN				(1 << 16)
+#define CCM_CCR_OSCNT_MASK			0xff
+#define CCM_CCR_OSCNT(v)			((v) & 0xff)
+
+#define CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET	19
+#define CCM_CCSR_PLL2_PFD_CLK_SEL_MASK		(0x7 << 19)
+#define CCM_CCSR_PLL2_PFD_CLK_SEL(v)		(((v) & 0x7) << 19)
+
+#define CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET	16
+#define CCM_CCSR_PLL1_PFD_CLK_SEL_MASK		(0x7 << 16)
+#define CCM_CCSR_PLL1_PFD_CLK_SEL(v)		(((v) & 0x7) << 16)
+
+#define CCM_CCSR_PLL2_PFD4_EN			(1 << 15)
+#define CCM_CCSR_PLL2_PFD3_EN			(1 << 14)
+#define CCM_CCSR_PLL2_PFD2_EN			(1 << 13)
+#define CCM_CCSR_PLL2_PFD1_EN			(1 << 12)
+#define CCM_CCSR_PLL1_PFD4_EN			(1 << 11)
+#define CCM_CCSR_PLL1_PFD3_EN			(1 << 10)
+#define CCM_CCSR_PLL1_PFD2_EN			(1 << 9)
+#define CCM_CCSR_PLL1_PFD1_EN			(1 << 8)
+
+#define CCM_CCSR_DDRC_CLK_SEL(v)		((v) << 6)
+#define CCM_CCSR_FAST_CLK_SEL(v)		((v) << 5)
+
+#define CCM_CCSR_SYS_CLK_SEL_OFFSET		0
+#define CCM_CCSR_SYS_CLK_SEL_MASK		0x7
+#define CCM_CCSR_SYS_CLK_SEL(v)			((v) & 0x7)
+
+#define CCM_CACRR_IPG_CLK_DIV_OFFSET		11
+#define CCM_CACRR_IPG_CLK_DIV_MASK		(0x3 << 11)
+#define CCM_CACRR_IPG_CLK_DIV(v)		(((v) & 0x3) << 11)
+#define CCM_CACRR_BUS_CLK_DIV_OFFSET		3
+#define CCM_CACRR_BUS_CLK_DIV_MASK		(0x7 << 3)
+#define CCM_CACRR_BUS_CLK_DIV(v)		(((v) & 0x7) << 3)
+#define CCM_CACRR_ARM_CLK_DIV_OFFSET		0
+#define CCM_CACRR_ARM_CLK_DIV_MASK		0x7
+#define CCM_CACRR_ARM_CLK_DIV(v)		((v) & 0x7)
+
+#define CCM_CSCMR1_DCU1_CLK_SEL			(1 << 29)
+#define CCM_CSCMR1_DCU0_CLK_SEL			(1 << 28)
+
+#define CCM_CSCMR1_QSPI0_CLK_SEL_OFFSET		22
+#define CCM_CSCMR1_QSPI0_CLK_SEL_MASK		(0x3 << 22)
+#define CCM_CSCMR1_QSPI0_CLK_SEL(v)		(((v) & 0x3) << 22)
+#define CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET	18
+#define CCM_CSCMR1_ESDHC1_CLK_SEL_MASK		(0x3 << 18)
+#define CCM_CSCMR1_ESDHC1_CLK_SEL(v)		(((v) & 0x3) << 18)
+#define CCM_CSCMR1_NFC_CLK_SEL_OFFSET		12
+#define CCM_CSCMR1_NFC_CLK_SEL_MASK		(0x3 << 12)
+#define CCM_CSCMR1_NFC_CLK_SEL(v)		(((v) & 0x3) << 12)
+
+#define CCM_CSCDR1_RMII_CLK_EN			(1 << 24)
+
+#define CCM_CSCDR2_NFC_EN			(1 << 9)
+#define CCM_CSCDR2_NFC_FRAC_DIV_EN		(1 << 13)
+#define CCM_CSCDR2_NFC_CLK_INV			(1 << 14)
+#define CCM_CSCDR2_NFC_FRAC_DIV_OFFSET		4
+#define CCM_CSCDR2_NFC_FRAC_DIV_MASK		(0xf << 4)
+#define CCM_CSCDR2_NFC_FRAC_DIV(v)		(((v) & 0xf) << 4)
+
+#define CCM_CSCDR2_ESDHC1_EN			(1 << 29)
+#define CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET	20
+#define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK		(0xf << 20)
+#define CCM_CSCDR2_ESDHC1_CLK_DIV(v)		(((v) & 0xf) << 20)
+
+#define CCM_CSCDR3_DCU1_EN			(1 << 23)
+#define CCM_CSCDR3_DCU1_DIV_MASK		(0x7 << 20)
+#define CCM_CSCDR3_DCU1_DIV(v)			(((v) & 0x7) << 20)
+#define CCM_CSCDR3_DCU0_EN			(1 << 19)
+#define CCM_CSCDR3_DCU0_DIV_MASK		(0x7 << 16)
+#define CCM_CSCDR3_DCU0_DIV(v)			(((v) & 0x7) << 16)
+
+#define CCM_CSCDR3_NFC_PRE_DIV_OFFSET		13
+#define CCM_CSCDR3_NFC_PRE_DIV_MASK		(0x7 << 13)
+#define CCM_CSCDR3_NFC_PRE_DIV(v)		(((v) & 0x7) << 13)
+#define CCM_CSCDR3_QSPI0_EN			(1 << 4)
+#define CCM_CSCDR3_QSPI0_DIV(v)			((v) << 3)
+#define CCM_CSCDR3_QSPI0_X2_DIV(v)		((v) << 2)
+#define CCM_CSCDR3_QSPI0_X4_DIV(v)		((v) & 0x3)
+
+#define CCM_CSCMR2_RMII_CLK_SEL_OFFSET		4
+#define CCM_CSCMR2_RMII_CLK_SEL_MASK		(0x3 << 4)
+#define CCM_CSCMR2_RMII_CLK_SEL(v)		(((v) & 0x3) << 4)
+
+#define CCM_REG_CTRL_MASK			0xffffffff
+#define CCM_CCGR0_UART0_CTRL_MASK               (0x3 << 14)
+#define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
+#define CCM_CCGR0_UART2_CTRL_MASK		(0x3 << 18)
+#define CCM_CCGR0_DSPI0_CTRL_MASK		(0x3 << 24)
+#define CCM_CCGR0_DSPI1_CTRL_MASK		(0x3 << 26)
+#define CCM_CCGR1_USBC0_CTRL_MASK       (0x3 << 8)
+#define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
+#define CCM_CCGR1_TCON0_CTRL_MASK		(0x3 << 26)
+#define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
+#define CCM_CCGR2_QSPI0_CTRL_MASK		(0x3 << 8)
+#define CCM_CCGR2_IOMUXC_CTRL_MASK		(0x3 << 16)
+#define CCM_CCGR2_PORTA_CTRL_MASK		(0x3 << 18)
+#define CCM_CCGR2_PORTB_CTRL_MASK		(0x3 << 20)
+#define CCM_CCGR2_PORTC_CTRL_MASK		(0x3 << 22)
+#define CCM_CCGR2_PORTD_CTRL_MASK		(0x3 << 24)
+#define CCM_CCGR2_PORTE_CTRL_MASK		(0x3 << 26)
+#define CCM_CCGR3_ANADIG_CTRL_MASK		0x3
+#define CCM_CCGR3_SCSC_CTRL_MASK        (0x3 << 4)
+#define CCM_CCGR3_DCU0_CTRL_MASK		(0x3 << 16)
+#define CCM_CCGR4_WKUP_CTRL_MASK		(0x3 << 20)
+#define CCM_CCGR4_CCM_CTRL_MASK			(0x3 << 22)
+#define CCM_CCGR4_GPC_CTRL_MASK			(0x3 << 24)
+#define CCM_CCGR4_I2C0_CTRL_MASK		(0x3 << 12)
+#define CCM_CCGR4_I2C1_CTRL_MASK		(0x3 << 14)
+#define CCM_CCGR6_OCOTP_CTRL_MASK		(0x3 << 10)
+#define CCM_CCGR6_DSPI2_CTRL_MASK		(0x3 << 24)
+#define CCM_CCGR6_DSPI3_CTRL_MASK		(0x3 << 26)
+#define CCM_CCGR6_DDRMC_CTRL_MASK		(0x3 << 28)
+#define CCM_CCGR7_SDHC1_CTRL_MASK		(0x3 << 4)
+#define CCM_CCGR7_USBC1_CTRL_MASK       (0x3 << 8)
+#define CCM_CCGR9_FEC0_CTRL_MASK		0x3
+#define CCM_CCGR9_FEC1_CTRL_MASK		(0x3 << 2)
+#define CCM_CCGR10_NFC_CTRL_MASK		0x3
+#define CCM_CCGR10_I2C2_CTRL_MASK		(0x3 << 12)
+#define CCM_CCGR10_I2C3_CTRL_MASK		(0x3 << 14)
+
+#define ANADIG_PLL7_CTRL_BYPASS         (1 << 16)
+#define ANADIG_PLL7_CTRL_ENABLE         (1 << 13)
+#define ANADIG_PLL7_CTRL_POWERDOWN      (1 << 12)
+#define ANADIG_PLL7_CTRL_DIV_SELECT     (1 << 1)
+#define ANADIG_PLL5_CTRL_BYPASS                 (1 << 16)
+#define ANADIG_PLL5_CTRL_ENABLE                 (1 << 13)
+#define ANADIG_PLL5_CTRL_POWERDOWN              (1 << 12)
+#define ANADIG_PLL5_CTRL_DIV_SELECT		1
+#define ANADIG_PLL3_CTRL_BYPASS         (1 << 16)
+#define ANADIG_PLL3_CTRL_ENABLE         (1 << 13)
+#define ANADIG_PLL3_CTRL_POWERDOWN      (1 << 12)
+#define ANADIG_PLL3_CTRL_DIV_SELECT     (1 << 1)
+#define ANADIG_PLL2_CTRL_ENABLE			(1 << 13)
+#define ANADIG_PLL2_CTRL_POWERDOWN		(1 << 12)
+#define ANADIG_PLL2_CTRL_DIV_SELECT		1
+#define ANADIG_PLL1_CTRL_ENABLE			(1 << 13)
+#define ANADIG_PLL1_CTRL_POWERDOWN		(1 << 12)
+#define ANADIG_PLL1_CTRL_DIV_SELECT		1
+
+#define FASE_CLK_FREQ		24000000
+#define SLOW_CLK_FREQ		32000
+#define PLL1_PFD1_FREQ		500000000
+#define PLL1_PFD2_FREQ		452000000
+#define PLL1_PFD3_FREQ		396000000
+#define PLL1_PFD4_FREQ		528000000
+#define PLL1_MAIN_FREQ		528000000
+#define PLL2_PFD1_FREQ		500000000
+#define PLL2_PFD2_FREQ		396000000
+#define PLL2_PFD3_FREQ		339000000
+#define PLL2_PFD4_FREQ		413000000
+#define PLL2_MAIN_FREQ		528000000
+#define PLL3_MAIN_FREQ		480000000
+#define PLL3_PFD3_FREQ		298000000
+#define PLL5_MAIN_FREQ		500000000
+
+#define ENET_EXTERNAL_CLK	50000000
+#define AUDIO_EXTERNAL_CLK	24576000
+
+#endif /*__ARCH_ARM_MACH_VF610_CCM_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h b/roms/u-boot/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
new file mode 100644
index 000000000..03e3cecb9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015
+ * Toradex, Inc.
+ *
+ * Authors: Stefan Agner
+ *          Sanchayan Maity
+ */
+
+#ifndef __ASM_ARCH_VF610_DDRMC_H
+#define __ASM_ARCH_VF610_DDRMC_H
+
+#include <asm/arch/iomux-vf610.h>
+
+struct ddr3_jedec_timings {
+	u8 tinit;
+	u32 trst_pwron;
+	u32 cke_inactive;
+	u8 wrlat;
+	u8 caslat_lin;
+	u8 trc;
+	u8 trrd;
+	u8 tccd;
+	u8 tbst_int_interval;
+	u8 tfaw;
+	u8 trp;
+	u8 twtr;
+	u8 tras_min;
+	u8 tmrd;
+	u8 trtp;
+	u32 tras_max;
+	u8 tmod;
+	u8 tckesr;
+	u8 tcke;
+	u8 trcd_int;
+	u8 tras_lockout;
+	u8 tdal;
+	u8 bstlen;
+	u16 tdll;
+	u8 trp_ab;
+	u16 tref;
+	u8 trfc;
+	u16 tref_int;
+	u8 tpdex;
+	u8 txpdll;
+	u8 txsnr;
+	u16 txsr;
+	u8 cksrx;
+	u8 cksre;
+	u8 freq_chg_en;
+	u16 zqcl;
+	u16 zqinit;
+	u8 zqcs;
+	u8 ref_per_zq;
+	u8 zqcs_rotate;
+	u8 aprebit;
+	u8 cmd_age_cnt;
+	u8 age_cnt;
+	u8 q_fullness;
+	u8 odt_rd_mapcs0;
+	u8 odt_wr_mapcs0;
+	u8 wlmrd;
+	u8 wldqsen;
+};
+
+struct ddrmc_cr_setting {
+	u32	setting;
+	int	cr_rnum; /* CR register ; -1 for last entry */
+};
+
+struct ddrmc_phy_setting {
+	u32	setting;
+	int	phy_rnum; /* PHY register ; -1 for last entry */
+};
+
+void ddrmc_setup_iomux(const iomux_v3_cfg_t *pads, int pads_count);
+void ddrmc_phy_init(void);
+void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
+			  struct ddrmc_cr_setting *board_cr_settings,
+			  struct ddrmc_phy_setting *board_phy_settings,
+			  int col_diff, int row_diff);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/arch-vf610/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-vf610/gpio.h
new file mode 100644
index 000000000..0b9e10f51
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-vf610/gpio.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ */
+
+#ifndef __ASM_ARCH_VF610_GPIO_H
+#define __ASM_ARCH_VF610_GPIO_H
+
+#define VYBRID_GPIO_COUNT		32
+#define VF610_GPIO_DIRECTION_IN	0x0
+#define VF610_GPIO_DIRECTION_OUT	0x1
+
+/* GPIO registers */
+struct vybrid_gpio_regs {
+	u32 gpio_pdor;
+	u32 gpio_psor;
+	u32 gpio_pcor;
+	u32 gpio_ptor;
+	u32 gpio_pdir;
+};
+
+struct vybrid_gpio_plat {
+	unsigned int chip;
+	u32 base;
+	const char *port_name;
+};
+#endif	/* __ASM_ARCH_VF610_GPIO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h b/roms/u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h
new file mode 100644
index 000000000..97211f4b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -0,0 +1,480 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define ARCH_MXC
+
+#define IRAM_BASE_ADDR		0x3F000000	/* internal ram */
+#define IRAM_SIZE		0x00080000	/* 512 KB */
+
+#define AIPS0_BASE_ADDR		0x40000000
+#define AIPS1_BASE_ADDR		0x40080000
+
+/* AIPS 0 */
+#define MSCM_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00001000)
+#define MSCM_IR_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00001800)
+#define CA5SCU_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00002000)
+#define CA5_INTD_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00003000)
+#define CA5_L2C_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00006000)
+#define NIC0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00008000)
+#define NIC1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00009000)
+#define NIC2_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000A000)
+#define NIC3_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000B000)
+#define NIC4_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000C000)
+#define NIC5_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000D000)
+#define NIC6_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000E000)
+#define NIC7_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000F000)
+#define AHBTZASC_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00010000)
+#define TZASC_SYS0_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00011000)
+#define TZASC_SYS1_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00012000)
+#define TZASC_GFX_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00013000)
+#define TZASC_DDR0_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00014000)
+#define TZASC_DDR1_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00015000)
+#define CSU_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00017000)
+#define DMA0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00018000)
+#define DMA0_TCD_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00019000)
+#define SEMA4_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0001D000)
+#define FB_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0001E000)
+#define DMA_MUX0_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00024000)
+#define UART0_BASE		(AIPS0_BASE_ADDR + 0x00027000)
+#define UART1_BASE		(AIPS0_BASE_ADDR + 0x00028000)
+#define UART2_BASE		(AIPS0_BASE_ADDR + 0x00029000)
+#define UART3_BASE		(AIPS0_BASE_ADDR + 0x0002A000)
+#define SPI0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0002C000)
+#define SPI1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0002D000)
+#define SAI0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0002F000)
+#define SAI1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00030000)
+#define SAI2_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00031000)
+#define SAI3_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00032000)
+#define CRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00033000)
+#define USBC0_BASE_ADDR     (AIPS0_BASE_ADDR + 0x00034000)
+#define PDB_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00036000)
+#define PIT_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00037000)
+#define FTM0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00038000)
+#define FTM1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00039000)
+#define ADC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0003B000)
+#define TCON0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0003D000)
+#define WDOG1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0003E000)
+#define LPTMR_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00040000)
+#define RLE_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00042000)
+#define MLB_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00043000)
+#define QSPI0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00044000)
+#define IOMUXC_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00048000)
+#define ANADIG_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00050000)
+#define USB_PHY0_BASE_ADDR  (AIPS0_BASE_ADDR + 0x00050800)
+#define USB_PHY1_BASE_ADDR  (AIPS0_BASE_ADDR + 0x00050C00)
+#define SCSC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00052000)
+#define DCU0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00058000)
+#define ASRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00060000)
+#define SPDIF_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00061000)
+#define ESAI_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00062000)
+#define ESAI_FIFO_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00063000)
+#define WDOG_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00065000)
+#define I2C1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00066000)
+#define I2C2_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00067000)
+#define I2C3_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000E6000)
+#define I2C4_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000E7000)
+#define WKUP_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006A000)
+#define CCM_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006B000)
+#define GPC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006C000)
+#define VREG_DIG_BASE_ADDR	(AIPS0_BASE_ADDR + 0x0006D000)
+#define SRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006E000)
+#define CMU_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006F000)
+#define GPIO0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF000)
+#define GPIO1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF040)
+#define GPIO2_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF080)
+#define GPIO3_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF0C0)
+#define GPIO4_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF100)
+
+/* AIPS 1 */
+#define OCOTP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00025000)
+#define DDR_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0002E000)
+#define ESDHC0_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00031000)
+#define ESDHC1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00032000)
+#define USBC1_BASE_ADDR     (AIPS1_BASE_ADDR + 0x00034000)
+#define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
+#define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
+#define DCU1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00058000)
+#define NFC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00060000)
+
+#define QSPI0_AMBA_BASE		0x20000000
+
+/* MUX mode and PAD ctrl are in one register */
+#define CONFIG_IOMUX_SHARE_CONF_REG
+
+#define FEC_QUIRK_ENET_MAC
+#define I2C_QUIRK_REG
+
+/* MSCM interrupt rounter */
+#define MSCM_IRSPRC_CP0_EN				1
+#define MSCM_IRSPRC_NUM					112
+
+/* DDRMC */
+#define DDRMC_PHY_DQ_TIMING				0x00002613
+#define DDRMC_PHY_DQS_TIMING				0x00002615
+#define DDRMC_PHY_CTRL					0x00210000
+#define DDRMC_PHY_MASTER_CTRL				0x0001012a
+#define DDRMC_PHY_SLAVE_CTRL				0x00002000
+#define DDRMC_PHY_OFF					0x00000000
+#define DDRMC_PHY_PROC_PAD_ODT				0x00010101
+
+#define DDRMC_PHY50_DDR3_MODE				(1 << 12)
+#define DDRMC_PHY50_EN_SW_HALF_CYCLE			(1 << 8)
+
+#define DDRMC_CR00_DRAM_CLASS_DDR3			(0x6 << 8)
+#define DDRMC_CR00_DRAM_CLASS_LPDDR2			(0x5 << 8)
+#define DDRMC_CR00_START				1
+#define DDRMC_CR02_DRAM_TINIT(v)			((v) & 0xffffff)
+#define DDRMC_CR10_TRST_PWRON(v)			(v)
+#define DDRMC_CR11_CKE_INACTIVE(v)			(v)
+#define DDRMC_CR12_WRLAT(v)				(((v) & 0x1f) << 8)
+#define DDRMC_CR12_CASLAT_LIN(v)			((v) & 0x3f)
+#define DDRMC_CR13_TRC(v)				(((v) & 0xff) << 24)
+#define DDRMC_CR13_TRRD(v)				(((v) & 0xff) << 16)
+#define DDRMC_CR13_TCCD(v)				(((v) & 0x1f) << 8)
+#define DDRMC_CR13_TBST_INT_INTERVAL(v)			((v) & 0x7)
+#define DDRMC_CR14_TFAW(v)				(((v) & 0x3f) << 24)
+#define DDRMC_CR14_TRP(v)				(((v) & 0x1f) << 16)
+#define DDRMC_CR14_TWTR(v)				(((v) & 0xf) << 8)
+#define DDRMC_CR14_TRAS_MIN(v)				((v) & 0xff)
+#define DDRMC_CR16_TMRD(v)				(((v) & 0x1f) << 24)
+#define DDRMC_CR16_TRTP(v)				(((v) & 0xf) << 16)
+#define DDRMC_CR17_TRAS_MAX(v)				(((v) & 0x1ffff) << 8)
+#define DDRMC_CR17_TMOD(v)				((v) & 0xff)
+#define DDRMC_CR18_TCKESR(v)				(((v) & 0x1f) << 8)
+#define DDRMC_CR18_TCKE(v)				((v) & 0x7)
+#define DDRMC_CR20_AP_EN				(1 << 24)
+#define DDRMC_CR21_TRCD_INT(v)				(((v) & 0xff) << 16)
+#define DDRMC_CR21_TRAS_LOCKOUT(v)			((v) << 8)
+#define DDRMC_CR21_CCMAP_EN				1
+#define DDRMC_CR22_TDAL(v)				(((v) & 0x3f) << 16)
+#define DDRMC_CR23_BSTLEN(v)				(((v) & 0x7) << 24)
+#define DDRMC_CR23_TDLL(v)				((v) & 0xffff)
+#define DDRMC_CR24_TRP_AB(v)				((v) & 0x1f)
+#define DDRMC_CR25_TREF_EN				(1 << 16)
+#define DDRMC_CR26_TREF(v)				(((v) & 0xffff) << 16)
+#define DDRMC_CR26_TRFC(v)				((v) & 0x3ff)
+#define DDRMC_CR28_TREF_INT(v)				((v) & 0xffff)
+#define DDRMC_CR29_TPDEX(v)				((v) & 0xffff)
+#define DDRMC_CR30_TXPDLL(v)				((v) & 0xffff)
+#define DDRMC_CR31_TXSNR(v)				(((v) & 0xffff) << 16)
+#define DDRMC_CR31_TXSR(v)				((v) & 0xffff)
+#define DDRMC_CR33_EN_QK_SREF				(1 << 16)
+#define DDRMC_CR34_CKSRX(v)				(((v) & 0xf) << 16)
+#define DDRMC_CR34_CKSRE(v)				(((v) & 0xf) << 8)
+#define DDRMC_CR38_FREQ_CHG_EN(v)			(((v) & 0x1) << 8)
+#define DDRMC_CR39_PHY_INI_COM(v)			(((v) & 0xffff) << 16)
+#define DDRMC_CR39_PHY_INI_STA(v)			(((v) & 0xff) << 8)
+#define DDRMC_CR39_FRQ_CH_DLLOFF(v)			((v) & 0x3)
+#define DDRMC_CR41_PHY_INI_STRT_INI_DIS			1
+#define DDRMC_CR48_MR1_DA_0(v)				(((v) & 0xffff) << 16)
+#define DDRMC_CR48_MR0_DA_0(v)				((v) & 0xffff)
+#define DDRMC_CR66_ZQCL(v)				(((v) & 0xfff) << 16)
+#define DDRMC_CR66_ZQINIT(v)				((v) & 0xfff)
+#define DDRMC_CR67_ZQCS(v)				((v) & 0xfff)
+#define DDRMC_CR69_ZQ_ON_SREF_EX(v)			(((v) & 0xf) << 8)
+#define DDRMC_CR70_REF_PER_ZQ(v)			(v)
+#define DDRMC_CR72_ZQCS_ROTATE(v)			(((v) & 0x1) << 24)
+#define DDRMC_CR73_APREBIT(v)				(((v) & 0xf) << 24)
+#define DDRMC_CR73_COL_DIFF(v)				(((v) & 0x7) << 16)
+#define DDRMC_CR73_ROW_DIFF(v)				(((v) & 0x3) << 8)
+#define DDRMC_CR74_BANKSPLT_EN				(1 << 24)
+#define DDRMC_CR74_ADDR_CMP_EN				(1 << 16)
+#define DDRMC_CR74_CMD_AGE_CNT(v)			(((v) & 0xff) << 8)
+#define DDRMC_CR74_AGE_CNT(v)				((v) & 0xff)
+#define DDRMC_CR75_RW_PG_EN				(1 << 24)
+#define DDRMC_CR75_RW_EN				(1 << 16)
+#define DDRMC_CR75_PRI_EN				(1 << 8)
+#define DDRMC_CR75_PLEN					1
+#define DDRMC_CR76_NQENT_ACTDIS(v)			(((v) & 0x7) << 24)
+#define DDRMC_CR76_D_RW_G_BKCN(v)			(((v) & 0x3) << 16)
+#define DDRMC_CR76_W2R_SPLT_EN				(1 << 8)
+#define DDRMC_CR76_CS_EN				1
+#define DDRMC_CR77_CS_MAP				(1 << 24)
+#define DDRMC_CR77_DI_RD_INTLEAVE			(1 << 8)
+#define DDRMC_CR77_SWAP_EN				1
+#define DDRMC_CR78_Q_FULLNESS(v)			(((v) & 0x7) << 24)
+#define DDRMC_CR78_BUR_ON_FLY_BIT(v)			((v) & 0xf)
+#define DDRMC_CR79_CTLUPD_AREF(v)			(((v) & 0x1) << 24)
+#define DDRMC_CR80_MC_INIT_COMPLETE			(1 << 8)
+#define DDRMC_CR82_INT_MASK				(1 << 28)
+#define DDRMC_CR87_ODT_WR_MAPCS0(v)			((v) << 24)
+#define DDRMC_CR87_ODT_RD_MAPCS0(v)			((v) << 16)
+#define DDRMC_CR88_TODTL_CMD(v)				(((v) & 0x1f) << 16)
+#define DDRMC_CR89_AODT_RWSMCS(v)			((v) & 0xf)
+#define DDRMC_CR91_R2W_SMCSDL(v)			(((v) & 0x7) << 16)
+#define DDRMC_CR93_SW_LVL_MODE_OFF			(8)
+#define DDRMC_CR93_SW_LVL_MODE(v) (((v) & 0x3) << DDRMC_CR93_SW_LVL_MODE_OFF)
+#define DDRMC_CR93_SWLVL_LOAD				BIT(16)
+#define DDRMC_CR93_SWLVL_START				BIT(24)
+#define DDRMC_CR94_SWLVL_EXIT				BIT(0)
+#define DDRMC_CR94_SWLVL_OP_DONE			BIT(8)
+#define DDRMC_CR94_SWLVL_RESP_0_OFF			(24)
+#define DDRMC_CR95_SWLVL_RESP_1_OFF			(0)
+#define DDRMC_CR96_WLMRD(v)				(((v) & 0x3f) << 8)
+#define DDRMC_CR96_WLDQSEN(v)				((v) & 0x3f)
+#define DDRMC_CR97_WRLVL_EN				(1 << 24)
+#define DDRMC_CR98_WRLVL_DL_0(v)			((v) & 0xffff)
+#define DDRMC_CR99_WRLVL_DL_1(v)			((v) & 0xffff)
+#define DDRMC_CR101_PHY_RDLVL_EDGE_OFF			(24)
+#define DDRMC_CR101_PHY_RDLVL_EDGE BIT(DDRMC_CR101_PHY_RDLVL_EDGE_OFF)
+#define DDRMC_CR102_RDLVL_GT_REGEN			(1 << 16)
+#define DDRMC_CR102_RDLVL_REG_EN			(1 << 8)
+#define DDRMC_CR105_RDLVL_DL_0_OFF			(8)
+#define DDRMC_CR105_RDLVL_DL_0(v) (((v) & 0xff) << DDRMC_CR105_RDLVL_DL_0_OFF)
+#define DDRMC_CR106_RDLVL_GTDL_0(v)			((v) & 0xff)
+#define DDRMC_CR110_RDLVL_DL_1_OFF			(0)
+#define DDRMC_CR110_RDLVL_DL_1(v)			((v) & 0xff)
+#define DDRMC_CR110_RDLVL_GTDL_1(v)			(((v) & 0xff) << 16)
+#define DDRMC_CR114_RDLVL_GTDL_2(v)			(((v) & 0xffff) << 8)
+#define DDRMC_CR115_RDLVL_GTDL_2(v)			((v) & 0xff)
+#define DDRMC_CR117_AXI0_W_PRI(v)			(((v) & 0x3) << 8)
+#define DDRMC_CR117_AXI0_R_PRI(v)			((v) & 0x3)
+#define DDRMC_CR118_AXI1_W_PRI(v)			(((v) & 0x3) << 24)
+#define DDRMC_CR118_AXI1_R_PRI(v)			(((v) & 0x3) << 16)
+#define DDRMC_CR120_AXI0_PRI1_RPRI(v)			(((v) & 0xf) << 24)
+#define DDRMC_CR120_AXI0_PRI0_RPRI(v)			(((v) & 0xf) << 16)
+#define DDRMC_CR121_AXI0_PRI3_RPRI(v)			(((v) & 0xf) << 8)
+#define DDRMC_CR121_AXI0_PRI2_RPRI(v)			((v) & 0xf)
+#define DDRMC_CR122_AXI1_PRI1_RPRI(v)			(((v) & 0xf) << 24)
+#define DDRMC_CR122_AXI1_PRI0_RPRI(v)			(((v) & 0xf) << 16)
+#define DDRMC_CR122_AXI0_PRIRLX(v)			((v) & 0x3ff)
+#define DDRMC_CR123_AXI1_PRI3_RPRI(v)			(((v) & 0xf) << 8)
+#define DDRMC_CR123_AXI1_PRI2_RPRI(v)			((v) & 0xf)
+#define DDRMC_CR123_AXI1_P_ODR_EN			(1 << 16)
+#define DDRMC_CR124_AXI1_PRIRLX(v)			((v) & 0x3ff)
+#define DDRMC_CR126_PHY_RDLAT(v)			(((v) & 0x3f) << 8)
+#define DDRMC_CR132_WRLAT_ADJ(v)			(((v) & 0x1f) << 8)
+#define DDRMC_CR132_RDLAT_ADJ(v)			((v) & 0x3f)
+#define DDRMC_CR137_PHYCTL_DL(v)			(((v) & 0xf) << 16)
+#define DDRMC_CR138_PHY_WRLV_MXDL(v)			(((v) & 0xffff) << 16)
+#define DDRMC_CR138_PHYDRAM_CK_EN(v)			(((v) & 0x7) << 8)
+#define DDRMC_CR139_PHY_WRLV_RESPLAT(v)			(((v) & 0xff) << 24)
+#define DDRMC_CR139_PHY_WRLV_LOAD(v)			(((v) & 0xff) << 16)
+#define DDRMC_CR139_PHY_WRLV_DLL(v)			(((v) & 0xff) << 8)
+#define DDRMC_CR139_PHY_WRLV_EN(v)			((v) & 0xff)
+#define DDRMC_CR140_PHY_WRLV_WW(v)			((v) & 0x3ff)
+#define DDRMC_CR143_RDLV_GAT_MXDL(v)			(((v) & 0xffff) << 16)
+#define DDRMC_CR143_RDLV_MXDL(v)			((v) & 0xffff)
+#define DDRMC_CR144_PHY_RDLVL_RES(v)			(((v) & 0xff) << 24)
+#define DDRMC_CR144_PHY_RDLV_LOAD(v)			(((v) & 0xff) << 16)
+#define DDRMC_CR144_PHY_RDLV_DLL(v)			(((v) & 0xff) << 8)
+#define DDRMC_CR144_PHY_RDLV_EN(v)			((v) & 0xff)
+#define DDRMC_CR145_PHY_RDLV_RR(v)			((v) & 0x3ff)
+#define DDRMC_CR146_PHY_RDLVL_RESP(v)			(v)
+#define DDRMC_CR147_RDLV_RESP_MASK(v)			((v) & 0xfffff)
+#define DDRMC_CR148_RDLV_GATE_RESP_MASK(v)		((v) & 0xfffff)
+#define DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(v)		(((v) & 0xf) << 8)
+#define DDRMC_CR151_RDLVL_DQ_ZERO_CNT(v)		((v) & 0xf)
+#define DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(v)	(((v) & 0x1f) << 27)
+#define DDRMC_CR154_PAD_ZQ_MODE(v)			(((v) & 0x3) << 21)
+#define DDRMC_CR154_DDR_SEL_PAD_CONTR(v)		(((v) & 0x3) << 18)
+#define DDRMC_CR154_PAD_ZQ_HW_FOR(v)			(((v) & 0x1) << 14)
+#define DDRMC_CR155_AXI0_AWCACHE			(1 << 10)
+#define DDRMC_CR155_PAD_ODT_BYTE1(v)			(((v) & 0x7) << 3)
+#define DDRMC_CR155_PAD_ODT_BYTE0(v)			((v) & 0x7)
+#define DDRMC_CR158_TWR(v)				((v) & 0x3f)
+#define DDRMC_CR161_ODT_EN(v)				(((v) & 0x1) << 16)
+#define DDRMC_CR161_TODTH_RD(v)				(((v) & 0xf) << 8)
+#define DDRMC_CR161_TODTH_WR(v)				((v) & 0xf)
+
+/* System Reset Controller (SRC) */
+#define SRC_SRSR_SW_RST					(0x1 << 18)
+#define SRC_SRSR_RESETB					(0x1 << 7)
+#define SRC_SRSR_JTAG_RST				(0x1 << 5)
+#define SRC_SRSR_WDOG_M4				(0x1 << 4)
+#define SRC_SRSR_WDOG_A5				(0x1 << 3)
+#define SRC_SRSR_POR_RST				(0x1 << 0)
+#define SRC_SBMR1_BOOTCFG1_SDMMC        BIT(6)
+#define SRC_SBMR1_BOOTCFG1_MMC          BIT(4)
+#define SRC_SBMR2_BMOD_MASK             (0x3 << 24)
+#define SRC_SBMR2_BMOD_SHIFT            24
+#define SRC_SBMR2_BMOD_FUSES            0x0
+#define SRC_SBMR2_BMOD_SERIAL           0x1
+#define SRC_SBMR2_BMOD_RCON             0x2
+
+/* Slow Clock Source Controller Module (SCSC) */
+#define SCSC_SOSC_CTR_SOSC_EN            0x1
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#include <linux/bitops.h>
+
+/* System Reset Controller (SRC) */
+struct src {
+	u32 scr;
+	u32 sbmr1;
+	u32 srsr;
+	u32 secr;
+	u32 gpsr;
+	u32 sicr;
+	u32 simr;
+	u32 sbmr2;
+	u32 gpr0;
+	u32 gpr1;
+	u32 gpr2;
+	u32 gpr3;
+	u32 gpr4;
+	u32 hab0;
+	u32 hab1;
+	u32 hab2;
+	u32 hab3;
+	u32 hab4;
+	u32 hab5;
+	u32 misc0;
+	u32 misc1;
+	u32 misc2;
+	u32 misc3;
+};
+
+/* Periodic Interrupt Timer (PIT) */
+struct pit_reg {
+	u32 mcr;
+	u32 recv0[55];
+	u32 ltmr64h;
+	u32 ltmr64l;
+	u32 recv1[6];
+	u32 ldval0;
+	u32 cval0;
+	u32 tctrl0;
+	u32 tflg0;
+	u32 ldval1;
+	u32 cval1;
+	u32 tctrl1;
+	u32 tflg1;
+	u32 ldval2;
+	u32 cval2;
+	u32 tctrl2;
+	u32 tflg2;
+	u32 ldval3;
+	u32 cval3;
+	u32 tctrl3;
+	u32 tflg3;
+	u32 ldval4;
+	u32 cval4;
+	u32 tctrl4;
+	u32 tflg4;
+	u32 ldval5;
+	u32 cval5;
+	u32 tctrl5;
+	u32 tflg5;
+	u32 ldval6;
+	u32 cval6;
+	u32 tctrl6;
+	u32 tflg6;
+	u32 ldval7;
+	u32 cval7;
+	u32 tctrl7;
+	u32 tflg7;
+};
+
+/* Watchdog Timer (WDOG) */
+struct wdog_regs {
+	u16 wcr;
+	u16 wsr;
+	u16 wrsr;
+	u16 wicr;
+	u16 wmcr;
+};
+
+/* LPDDR2/DDR3 SDRAM Memory Controller (DDRMC) */
+struct ddrmr_regs {
+	u32 cr[162];
+	u32 rsvd[94];
+	u32 phy[53];
+};
+
+/* On-Chip One Time Programmable Controller (OCOTP) */
+struct ocotp_regs {
+	u32 ctrl;
+	u32 ctrl_set;
+	u32 ctrl_clr;
+	u32 ctrl_tog;
+	u32 timing;
+	u32 rsvd0[3];
+	u32 data;
+	u32 rsvd1[3];
+	u32 read_ctrl;
+	u32 rsvd2[3];
+	u32 read_fuse_data;
+	u32 rsvd3[7];
+	u32 scs;
+	u32 scs_set;
+	u32 scs_clr;
+	u32 scs_tog;
+	u32 crc_addr;
+	u32 rsvd4[3];
+	u32 crc_value;
+	u32 rsvd5[3];
+	u32 version;
+	u32 rsvd6[0xdb];
+
+	struct fuse_bank {
+		u32 fuse_regs[0x20];
+	} bank[16];
+};
+
+struct fuse_bank0_regs {
+	u32 lock;
+	u32 rsvd0[3];
+	u32 uid_low;
+	u32 rsvd1[3];
+	u32 uid_high;
+	u32 rsvd2[0x17];
+};
+
+struct fuse_bank4_regs {
+	u32 sjc_resp0;
+	u32 rsvd0[3];
+	u32 sjc_resp1;
+	u32 rsvd1[3];
+	u32 mac_addr0;
+	u32 rsvd2[3];
+	u32 mac_addr1;
+	u32 rsvd3[3];
+	u32 mac_addr2;
+	u32 rsvd4[3];
+	u32 mac_addr3;
+	u32 rsvd5[3];
+	u32 gp1;
+	u32 rsvd6[3];
+	u32 gp2;
+	u32 rsvd7[3];
+};
+
+/* MSCM Interrupt Router */
+struct mscm_ir {
+	u32 ircp0ir;
+	u32 ircp1ir;
+	u32 rsvd1[6];
+	u32 ircpgir;
+	u32 rsvd2[23];
+	u16 irsprc[112];
+	u16 rsvd3[848];
+};
+
+/* SCSC */
+struct scsc_reg {
+	u32 sirc_ctr;
+	u32 sosc_ctr;
+};
+
+/* MSCM */
+struct mscm {
+	u32 cpxtype;
+	u32 cpxnum;
+	u32 cpxmaster;
+	u32 cpxcount;
+	u32 cpxcfg0;
+	u32 cpxcfg1;
+	u32 cpxcfg2;
+	u32 cpxcfg3;
+};
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* __ASM_ARCH_IMX_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/roms/u-boot/arch/arm/include/asm/arch-vf610/iomux-vf610.h
new file mode 100644
index 000000000..8ba03e5a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -0,0 +1,255 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __IOMUX_VF610_H__
+#define __IOMUX_VF610_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+/* Pad control groupings */
+#define VF610_UART_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_25ohm | \
+				PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_SDHC_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_20ohm | \
+				PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_ENET_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
+				PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_DDR_PAD_CTRL	PAD_CTL_DSE_25ohm
+#define VF610_DDR_PAD_CTRL_1	(PAD_CTL_DSE_25ohm | \
+				PAD_CTL_INPUT_DIFFERENTIAL)
+#define VF610_I2C_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
+				PAD_CTL_SPEED_HIGH | PAD_CTL_ODE | \
+				PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_NFC_IO_PAD_CTRL	(PAD_CTL_SPEED_MED | PAD_CTL_SRE | \
+				PAD_CTL_DSE_50ohm | PAD_CTL_PUS_47K_UP | \
+				PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_NFC_CN_PAD_CTRL	(PAD_CTL_SPEED_MED | PAD_CTL_SRE | \
+				PAD_CTL_DSE_25ohm | PAD_CTL_OBE_ENABLE)
+#define VF610_NFC_RB_PAD_CTRL	(PAD_CTL_SPEED_MED | PAD_CTL_SRE | \
+				PAD_CTL_PUS_22K_UP | PAD_CTL_IBE_ENABLE)
+
+#define VF610_QSPI_PAD_CTRL	(PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_150ohm | \
+				PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
+
+#define VF610_GPIO_PAD_CTRL	(PAD_CTL_SPEED_MED | PAD_CTL_DSE_50ohm | \
+				PAD_CTL_IBE_ENABLE)
+
+#define VF610_DSPI_PAD_CTRL	(PAD_CTL_OBE_ENABLE | PAD_CTL_DSE_20ohm | \
+				PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+#define VF610_DSPI_SIN_PAD_CTRL	(PAD_CTL_IBE_ENABLE | PAD_CTL_DSE_20ohm | \
+				PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+#define VF610_DCU_PAD_CTRL     (PAD_CTL_SPEED_MED | PAD_CTL_SRE | \
+				PAD_CTL_DSE_37ohm | PAD_CTL_OBE_ENABLE)
+
+enum {
+	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTA6__RMII0_CLKOUT		= IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTA7__GPIO_134		= IOMUX_PAD(0x0218, 0x0218, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTA17__GPIO_7			= IOMUX_PAD(0x001c, 0x001c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTA20__GPIO_10		= IOMUX_PAD(0x0028, 0x0028, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTA21__GPIO_11		= IOMUX_PAD(0x002c, 0x002c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTA30__GPIO_20		= IOMUX_PAD(0x0050, 0x0050, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTA31__GPIO_21		= IOMUX_PAD(0x0054, 0x0054, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB0__GPIO_22			= IOMUX_PAD(0x0058, 0x0058, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB1__GPIO_23			= IOMUX_PAD(0x005C, 0x005C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB4__UART1_TX		= IOMUX_PAD(0x0068, 0x0068, 2, 0x0380, 0, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTB5__UART1_RX		= IOMUX_PAD(0x006c, 0x006c, 2, 0x037c, 0, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTB6__GPIO_28			= IOMUX_PAD(0x0070, 0x0070, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB7__GPIO_29			= IOMUX_PAD(0x0074, 0x0074, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB8__GPIO_30			= IOMUX_PAD(0x0078, 0x0078, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB9__GPIO_31			= IOMUX_PAD(0x007C, 0x007C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB10__UART0_TX		= IOMUX_PAD(0x0080, 0x0080, 1, __NA_, 0, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTB11__UART0_RX		= IOMUX_PAD(0x0084, 0x0084, 1, __NA_, 0, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTB12__GPIO_34		= IOMUX_PAD(0x0088, 0x0088, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB13__GPIO_35		= IOMUX_PAD(0x008c, 0x008c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB16__GPIO_38		= IOMUX_PAD(0x0098, 0x0098, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB17__GPIO_39		= IOMUX_PAD(0x009c, 0x009c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB18__GPIO_40		= IOMUX_PAD(0x00a0, 0x00a0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB21__GPIO_43		= IOMUX_PAD(0x00ac, 0x00ac, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB22__GPIO_44		= IOMUX_PAD(0x00b0, 0x00b0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB23__GPIO_93		= IOMUX_PAD(0x0174, 0x0174, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB26__GPIO_96		= IOMUX_PAD(0x0180, 0x0180, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTB28__GPIO_98		= IOMUX_PAD(0x0188, 0x0188, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC1__GPIO_46			= IOMUX_PAD(0x00b8, 0x00b8, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC1__RMII0_MDIO		= IOMUX_PAD(0x00b8, 0x00b8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC0__GPIO_45			= IOMUX_PAD(0x00b4, 0x00b4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC0__RMII0_MDC		= IOMUX_PAD(0x00b4, 0x00b4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC2__RMII0_CRS_DV		= IOMUX_PAD(0x00bc, 0x00bc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC2__GPIO_47			= IOMUX_PAD(0x00bc, 0x00bc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC3__RMII0_RD1		= IOMUX_PAD(0x00c0, 0x00c0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC3__GPIO_48			= IOMUX_PAD(0x00c0, 0x00c0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC4__RMII0_RD0		= IOMUX_PAD(0x00c4, 0x00c4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC4__GPIO_49			= IOMUX_PAD(0x00c4, 0x00c4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC5__RMII0_RXER		= IOMUX_PAD(0x00c8, 0x00c8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC5__GPIO_50			= IOMUX_PAD(0x00c8, 0x00c8, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC6__RMII0_TD1		= IOMUX_PAD(0x00cc, 0x00cc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC6__GPIO_51			= IOMUX_PAD(0x00cc, 0x00cc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC7__RMII0_TD0		= IOMUX_PAD(0x00D0, 0x00D0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC7__GPIO_52			= IOMUX_PAD(0x00D0, 0x00D0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC8__RMII0_TXEN		= IOMUX_PAD(0x00D4, 0x00D4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC8__GPIO_53			= IOMUX_PAD(0x00D4, 0x00D4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC10__RMII1_MDIO		= IOMUX_PAD(0x00dc, 0x00dc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC9__RMII1_MDC		= IOMUX_PAD(0x00d8, 0x00d8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC11__RMII1_CRS_DV		= IOMUX_PAD(0x00e0, 0x00e0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC12__RMII1_RD1		= IOMUX_PAD(0x00e4, 0x00e4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC13__RMII1_RD0		= IOMUX_PAD(0x00e8, 0x00e8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC14__RMII1_RXER		= IOMUX_PAD(0x00ec, 0x00ec, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC15__RMII1_TD1		= IOMUX_PAD(0x00f0, 0x00f0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC16__RMII1_TD0		= IOMUX_PAD(0x00f4, 0x00f4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC17__RMII1_TXEN		= IOMUX_PAD(0x00f8, 0x00f8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTD5__DSPI1_CS0		= IOMUX_PAD(0x0150, 0x0150, 3, 0x300, 1, VF610_DSPI_PAD_CTRL),
+	VF610_PAD_PTD6__DSPI1_SIN		= IOMUX_PAD(0x0154, 0x0154, 3, 0x2fc, 1, VF610_DSPI_SIN_PAD_CTRL),
+	VF610_PAD_PTD7__DSPI1_SOUT		= IOMUX_PAD(0x0158, 0x0158, 3, __NA_, 0, VF610_DSPI_PAD_CTRL),
+	VF610_PAD_PTD8__DSPI1_SCK		= IOMUX_PAD(0x015c, 0x015c, 3, 0x2f8, 1, VF610_DSPI_PAD_CTRL),
+	VF610_PAD_PTC29__GPIO_102		= IOMUX_PAD(0x0198, 0x0198, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTC30__GPIO_103		= IOMUX_PAD(0x019c, 0x019c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTA24__ESDHC1_CLK		= IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA25__ESDHC1_CMD		= IOMUX_PAD(0x003c, 0x003c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA26__ESDHC1_DAT0		= IOMUX_PAD(0x0040, 0x0040, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA27__ESDHC1_DAT1		= IOMUX_PAD(0x0044, 0x0044, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA28__ESDHC1_DAT2		= IOMUX_PAD(0x0048, 0x0048, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA29__ESDHC1_DAT3		= IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTB14__I2C0_SCL		= IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1, VF610_I2C_PAD_CTRL),
+	VF610_PAD_PTB15__I2C0_SDA		= IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1, VF610_I2C_PAD_CTRL),
+	VF610_PAD_PTA22__I2C2_SCL		= IOMUX_PAD(0x0030, 0x0030, 6, 0x034c, 0, VF610_I2C_PAD_CTRL),
+	VF610_PAD_PTA23__I2C2_SDA		= IOMUX_PAD(0x0034, 0x0034, 6, 0x0350, 0, VF610_I2C_PAD_CTRL),
+	VF610_PAD_PTD31__NF_IO15		= IOMUX_PAD(0x00fc, 0x00fc, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD31__GPIO_63		= IOMUX_PAD(0x00fc, 0x00fc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD30__NF_IO14		= IOMUX_PAD(0x0100, 0x0100, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD30__GPIO_64		= IOMUX_PAD(0x0100, 0x0100, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD29__NF_IO13		= IOMUX_PAD(0x0104, 0x0104, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD29__GPIO_65		= IOMUX_PAD(0x0104, 0x0104, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD28__NF_IO12		= IOMUX_PAD(0x0108, 0x0108, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD28__GPIO_66		= IOMUX_PAD(0x0108, 0x0108, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD27__NF_IO11		= IOMUX_PAD(0x010c, 0x010c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD27__GPIO_67		= IOMUX_PAD(0x010c, 0x010c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD26__NF_IO10		= IOMUX_PAD(0x0110, 0x0110, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD26__GPIO_68		= IOMUX_PAD(0x0110, 0x0110, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD25__NF_IO9			= IOMUX_PAD(0x0114, 0x0114, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD25__GPIO_69		= IOMUX_PAD(0x0114, 0x0114, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD24__NF_IO8			= IOMUX_PAD(0x0118, 0x0118, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD24__GPIO_70		= IOMUX_PAD(0x0118, 0x0118, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD23__NF_IO7			= IOMUX_PAD(0x011c, 0x011c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD0__QSPI0_A_QSCK		= IOMUX_PAD(0x013c, 0x013c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD0__UART2_TX		= IOMUX_PAD(0x013c, 0x013c, 2, 0x38c, 2, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTD1__QSPI0_A_CS0		= IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD1__UART2_RX		= IOMUX_PAD(0x0140, 0x0140, 2, 0x388, 2, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTD2__QSPI0_A_DATA3		= IOMUX_PAD(0x0144, 0x0144, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD2__GPIO_81			= IOMUX_PAD(0x0144, 0x0144, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD3__QSPI0_A_DATA2		= IOMUX_PAD(0x0148, 0x0148, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD3__GPIO_82			= IOMUX_PAD(0x0148, 0x0148, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD4__GPIO_83			= IOMUX_PAD(0x014C, 0x014C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD4__QSPI0_A_DATA1		= IOMUX_PAD(0x014c, 0x014c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD5__QSPI0_A_DATA0		= IOMUX_PAD(0x0150, 0x0150, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD7__QSPI0_B_QSCK		= IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD8__QSPI0_B_CS0		= IOMUX_PAD(0x015c, 0x015c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD9__QSPI0_B_DATA3		= IOMUX_PAD(0x0160, 0x0160, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD9__GPIO_88			= IOMUX_PAD(0x0160, 0x0160, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD10__QSPI0_B_DATA2		= IOMUX_PAD(0x0164, 0x0164, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD10__GPIO_89		= IOMUX_PAD(0x0164, 0x0164, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD11__QSPI0_B_DATA1		= IOMUX_PAD(0x0168, 0x0168, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD11__GPIO_90		= IOMUX_PAD(0x0168, 0x0168, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD12__QSPI0_B_DATA0		= IOMUX_PAD(0x016c, 0x016c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD12__GPIO_91		= IOMUX_PAD(0x016c, 0x016c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD13__GPIO_92		= IOMUX_PAD(0x0170, 0x0170, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD22__NF_IO6			= IOMUX_PAD(0x0120, 0x0120, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD21__NF_IO5			= IOMUX_PAD(0x0124, 0x0124, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD20__NF_IO4			= IOMUX_PAD(0x0128, 0x0128, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD19__NF_IO3			= IOMUX_PAD(0x012c, 0x012c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD18__NF_IO2			= IOMUX_PAD(0x0130, 0x0130, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD17__NF_IO1			= IOMUX_PAD(0x0134, 0x0134, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTD16__NF_IO0			= IOMUX_PAD(0x0138, 0x0138, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+	VF610_PAD_PTB24__NF_WE_B		= IOMUX_PAD(0x0178, 0x0178, 5, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
+	VF610_PAD_PTB25__NF_CE0_B		= IOMUX_PAD(0x017c, 0x017c, 5, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
+
+	VF610_PAD_PTB27__NF_RE_B 		= IOMUX_PAD(0x0184, 0x0184, 6, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
+
+	VF610_PAD_PTC26__NF_RB_B 		= IOMUX_PAD(0x018C, 0x018C, 5, __NA_, 0, VF610_NFC_RB_PAD_CTRL),
+
+	VF610_PAD_PTC27__NF_ALE  		= IOMUX_PAD(0x0190, 0x0190, 6, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
+
+	VF610_PAD_PTC28__NF_CLE  		= IOMUX_PAD(0x0194, 0x0194, 6, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
+
+	VF610_PAD_PTE0__DCU0_HSYNC		= IOMUX_PAD(0x01a4, 0x01a4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE1__DCU0_VSYNC		= IOMUX_PAD(0x01a8, 0x01a8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE2__DCU0_PCLK		= IOMUX_PAD(0x01ac, 0x01ac, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE4__DCU0_DE			= IOMUX_PAD(0x01b4, 0x01b4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE5__DCU0_R0			= IOMUX_PAD(0x01b8, 0x01b8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE6__DCU0_R1			= IOMUX_PAD(0x01bc, 0x01bc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE7__DCU0_R2			= IOMUX_PAD(0x01c0, 0x01c0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE8__DCU0_R3			= IOMUX_PAD(0x01c4, 0x01c4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE9__DCU0_R4			= IOMUX_PAD(0x01c8, 0x01c8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE10__DCU0_R5		= IOMUX_PAD(0x01cc, 0x01cc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE11__DCU0_R6		= IOMUX_PAD(0x01d0, 0x01d0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE12__DCU0_R7		= IOMUX_PAD(0x01d4, 0x01d4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE13__DCU0_G0		= IOMUX_PAD(0x01d8, 0x01d8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE14__DCU0_G1		= IOMUX_PAD(0x01dc, 0x01dc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE15__DCU0_G2		= IOMUX_PAD(0x01e0, 0x01e0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE16__DCU0_G3		= IOMUX_PAD(0x01e4, 0x01e4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE17__DCU0_G4		= IOMUX_PAD(0x01e8, 0x01e8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE18__DCU0_G5		= IOMUX_PAD(0x01ec, 0x01ec, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE19__DCU0_G6		= IOMUX_PAD(0x01f0, 0x01f0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE20__DCU0_G7		= IOMUX_PAD(0x01f4, 0x01f4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE21__DCU0_B0		= IOMUX_PAD(0x01f8, 0x01f8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE22__DCU0_B1		= IOMUX_PAD(0x01fc, 0x01fc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE23__DCU0_B2		= IOMUX_PAD(0x0200, 0x0200, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE24__DCU0_B3		= IOMUX_PAD(0x0204, 0x0204, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE25__DCU0_B4		= IOMUX_PAD(0x0208, 0x0208, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE26__DCU0_B5		= IOMUX_PAD(0x020c, 0x020c, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE27__DCU0_B6		= IOMUX_PAD(0x0210, 0x0210, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE28__DCU0_B7		= IOMUX_PAD(0x0214, 0x0214, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+
+	VF610_PAD_DDR_RESETB			= IOMUX_PAD(0x021c, 0x021c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A15__DDR_A_15		= IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A14__DDR_A_14		= IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A13__DDR_A_13		= IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A12__DDR_A_12		= IOMUX_PAD(0x022c, 0x022c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A11__DDR_A_11		= IOMUX_PAD(0x0230, 0x0230, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A10__DDR_A_10		= IOMUX_PAD(0x0234, 0x0234, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A9__DDR_A_9		= IOMUX_PAD(0x0238, 0x0238, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A8__DDR_A_8		= IOMUX_PAD(0x023c, 0x023c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A7__DDR_A_7		= IOMUX_PAD(0x0240, 0x0240, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A6__DDR_A_6		= IOMUX_PAD(0x0244, 0x0244, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A5__DDR_A_5		= IOMUX_PAD(0x0248, 0x0248, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A4__DDR_A_4		= IOMUX_PAD(0x024c, 0x024c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A3__DDR_A_3		= IOMUX_PAD(0x0250, 0x0250, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A2__DDR_A_2		= IOMUX_PAD(0x0254, 0x0254, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A1__DDR_A_1		= IOMUX_PAD(0x0258, 0x0258, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A0__DDR_A_0		= IOMUX_PAD(0x025c, 0x025c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_BA2__DDR_BA_2		= IOMUX_PAD(0x0260, 0x0260, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_BA1__DDR_BA_1		= IOMUX_PAD(0x0264, 0x0264, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_BA0__DDR_BA_0		= IOMUX_PAD(0x0268, 0x0268, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_CAS__DDR_CAS_B		= IOMUX_PAD(0x026c, 0x026c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_CKE__DDR_CKE_0		= IOMUX_PAD(0x0270, 0x0270, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_CLK__DDR_CLK_0		= IOMUX_PAD(0x0274, 0x0274, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_CS__DDR_CS_B_0		= IOMUX_PAD(0x0278, 0x0278, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D15__DDR_D_15		= IOMUX_PAD(0x027c, 0x027c, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D14__DDR_D_14		= IOMUX_PAD(0x0280, 0x0280, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D13__DDR_D_13		= IOMUX_PAD(0x0284, 0x0284, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D12__DDR_D_12		= IOMUX_PAD(0x0288, 0x0288, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D11__DDR_D_11		= IOMUX_PAD(0x028c, 0x028c, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D10__DDR_D_10		= IOMUX_PAD(0x0290, 0x0290, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D9__DDR_D_9		= IOMUX_PAD(0x0294, 0x0294, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D8__DDR_D_8		= IOMUX_PAD(0x0298, 0x0298, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D7__DDR_D_7		= IOMUX_PAD(0x029c, 0x029c, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D6__DDR_D_6		= IOMUX_PAD(0x02a0, 0x02a0, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D5__DDR_D_5		= IOMUX_PAD(0x02a4, 0x02a4, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D4__DDR_D_4		= IOMUX_PAD(0x02a8, 0x02a8, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D3__DDR_D_3		= IOMUX_PAD(0x02ac, 0x02ac, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D2__DDR_D_2		= IOMUX_PAD(0x02b0, 0x02b0, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D1__DDR_D_1		= IOMUX_PAD(0x02b4, 0x02b4, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_D0__DDR_D_0		= IOMUX_PAD(0x02b8, 0x02b8, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_DQM1__DDR_DQM_1		= IOMUX_PAD(0x02bc, 0x02bc, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_DQM0__DDR_DQM_0		= IOMUX_PAD(0x02c0, 0x02c0, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_DQS1__DDR_DQS_1		= IOMUX_PAD(0x02c4, 0x02c4, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_DQS0__DDR_DQS_0		= IOMUX_PAD(0x02c8, 0x02c8, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1),
+	VF610_PAD_DDR_RAS__DDR_RAS_B		= IOMUX_PAD(0x02cc, 0x02cc, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_WE__DDR_WE_B		= IOMUX_PAD(0x02d0, 0x02d0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_ODT1__DDR_ODT_0		= IOMUX_PAD(0x02d4, 0x02d4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_ODT0__DDR_ODT_1		= IOMUX_PAD(0x02d8, 0x02d8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1	= IOMUX_PAD(0x02dc, 0x02dc, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2	= IOMUX_PAD(0x02e0, 0x02e0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+};
+
+#endif	/* __IOMUX_VF610_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/armv7.h b/roms/u-boot/arch/arm/include/asm/armv7.h
new file mode 100644
index 000000000..2fb824b69
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/armv7.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ */
+#ifndef ARMV7_H
+#define ARMV7_H
+
+/* Cortex-A9 revisions */
+#define MIDR_CORTEX_A9_R0P1	0x410FC091
+#define MIDR_CORTEX_A9_R1P2	0x411FC092
+#define MIDR_CORTEX_A9_R1P3	0x411FC093
+#define MIDR_CORTEX_A9_R2P10	0x412FC09A
+
+/* Cortex-A15 revisions */
+#define MIDR_CORTEX_A15_R0P0	0x410FC0F0
+#define MIDR_CORTEX_A15_R2P2	0x412FC0F2
+
+/* Cortex-A7 revisions */
+#define MIDR_CORTEX_A7_R0P0	0x410FC070
+
+#define MIDR_PRIMARY_PART_MASK	0xFF0FFFF0
+
+/* ID_PFR1 feature fields */
+#define CPUID_ARM_SEC_SHIFT		4
+#define CPUID_ARM_SEC_MASK		(0xF << CPUID_ARM_SEC_SHIFT)
+#define CPUID_ARM_VIRT_SHIFT		12
+#define CPUID_ARM_VIRT_MASK		(0xF << CPUID_ARM_VIRT_SHIFT)
+#define CPUID_ARM_GENTIMER_SHIFT	16
+#define CPUID_ARM_GENTIMER_MASK		(0xF << CPUID_ARM_GENTIMER_SHIFT)
+
+/* valid bits in CBAR register / PERIPHBASE value */
+#define CBAR_MASK			0xFFFF8000
+
+/* CCSIDR */
+#define CCSIDR_LINE_SIZE_OFFSET		0
+#define CCSIDR_LINE_SIZE_MASK		0x7
+#define CCSIDR_ASSOCIATIVITY_OFFSET	3
+#define CCSIDR_ASSOCIATIVITY_MASK	(0x3FF << 3)
+#define CCSIDR_NUM_SETS_OFFSET		13
+#define CCSIDR_NUM_SETS_MASK		(0x7FFF << 13)
+
+/*
+ * Values for InD field in CSSELR
+ * Selects the type of cache
+ */
+#define ARMV7_CSSELR_IND_DATA_UNIFIED	0
+#define ARMV7_CSSELR_IND_INSTRUCTION	1
+
+/* Values for Ctype fields in CLIDR */
+#define ARMV7_CLIDR_CTYPE_NO_CACHE		0
+#define ARMV7_CLIDR_CTYPE_INSTRUCTION_ONLY	1
+#define ARMV7_CLIDR_CTYPE_DATA_ONLY		2
+#define ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA	3
+#define ARMV7_CLIDR_CTYPE_UNIFIED		4
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/barriers.h>
+
+/* read L2 control register (L2CTLR) */
+static inline uint32_t read_l2ctlr(void)
+{
+	uint32_t val = 0;
+
+	asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
+
+	return val;
+}
+
+/* write L2 control register (L2CTLR) */
+static inline void write_l2ctlr(uint32_t val)
+{
+	/*
+	 * Note: L2CTLR can only be written when the L2 memory system
+	 * is idle, ie before the MMU is enabled.
+	 */
+	asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory");
+	isb();
+}
+
+/*
+ * Workaround for ARM errata # 798870
+ * Set L2ACTLR[7] to reissue any memory transaction in the L2 that has been
+ * stalled for 1024 cycles to verify that its hazard condition still exists.
+ */
+static inline void v7_enable_l2_hazard_detect(void)
+{
+	uint32_t val;
+
+	/* L2ACTLR[7]: Enable hazard detect timeout */
+	asm volatile ("mrc     p15, 1, %0, c15, c0, 0\n\t" : "=r"(val));
+	val |= (1 << 7);
+	asm volatile ("mcr     p15, 1, %0, c15, c0, 0\n\t" : : "r"(val));
+}
+
+/*
+ * Workaround for ARM errata # 799270
+ * Ensure that the L2 logic has been used within the previous 256 cycles
+ * before modifying the ACTLR.SMP bit. This is required during boot before
+ * MMU has been enabled, or during a specified reset or power down sequence.
+ */
+static inline void v7_enable_smp(uint32_t address)
+{
+	uint32_t temp, val;
+
+	/* Read auxiliary control register */
+	asm volatile ("mrc     p15, 0, %0, c1, c0, 1\n\t" : "=r"(val));
+
+	/* Enable SMP */
+	val |= (1 << 6);
+
+	/* Dummy read to assure L2 access */
+	temp = readl(address);
+	temp &= 0;
+	val |= temp;
+
+	/* Write auxiliary control register */
+	asm volatile ("mcr     p15, 0, %0, c1, c0, 1\n\t" : : "r"(val));
+
+	CP15DSB;
+	CP15ISB;
+}
+
+void v7_en_l2_hazard_detect(void);
+void v7_outer_cache_enable(void);
+void v7_outer_cache_disable(void);
+void v7_outer_cache_flush_all(void);
+void v7_outer_cache_inval_all(void);
+void v7_outer_cache_flush_range(u32 start, u32 end);
+void v7_outer_cache_inval_range(u32 start, u32 end);
+
+#ifdef CONFIG_ARMV7_NONSEC
+
+int armv7_init_nonsec(void);
+int armv7_apply_memory_carveout(u64 *start, u64 *size);
+bool armv7_boot_nonsec(void);
+
+/* defined in assembly file */
+unsigned int _nonsec_init(void);
+void _do_nonsec_entry(void *target_pc, unsigned long r0,
+		      unsigned long r1, unsigned long r2);
+void _smp_pen(void);
+
+extern char __secure_start[];
+extern char __secure_end[];
+extern char __secure_stack_start[];
+extern char __secure_stack_end[];
+
+#endif /* CONFIG_ARMV7_NONSEC */
+
+void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
+				 u32 cpu_rev_comb, u32 cpu_variant,
+				 u32 cpu_rev);
+void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+			  u32 cpu_variant, u32 cpu_rev);
+#endif /* ! __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/armv7_mpu.h b/roms/u-boot/arch/arm/include/asm/armv7_mpu.h
new file mode 100644
index 000000000..16b9d0d1a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/armv7_mpu.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ */
+
+#ifndef _ASM_ARMV7_MPU_H
+#define _ASM_ARMV7_MPU_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#ifdef CONFIG_CPU_V7M
+#define AP_SHIFT			24
+#define XN_SHIFT			28
+#define TEX_SHIFT			19
+#define S_SHIFT				18
+#define C_SHIFT				17
+#define B_SHIFT				16
+#else /* CONFIG_CPU_V7R */
+#define XN_SHIFT			12
+#define AP_SHIFT			8
+#define TEX_SHIFT			3
+#define S_SHIFT				2
+#define C_SHIFT				1
+#define B_SHIFT				0
+#endif /* CONFIG_CPU_V7R */
+
+#define CACHEABLE			BIT(C_SHIFT)
+#define BUFFERABLE			BIT(B_SHIFT)
+#define SHAREABLE			BIT(S_SHIFT)
+#define REGION_SIZE_SHIFT		1
+#define ENABLE_REGION			BIT(0)
+#define DISABLE_REGION			0
+
+enum region_number {
+	REGION_0 = 0,
+	REGION_1,
+	REGION_2,
+	REGION_3,
+	REGION_4,
+	REGION_5,
+	REGION_6,
+	REGION_7,
+};
+
+enum ap {
+	NO_ACCESS = 0,
+	PRIV_RW_USR_NO,
+	PRIV_RW_USR_RO,
+	PRIV_RW_USR_RW,
+	UNPREDICTABLE,
+	PRIV_RO_USR_NO,
+	PRIV_RO_USR_RO,
+};
+
+enum mr_attr {
+	STRONG_ORDER = 0,
+	SHARED_WRITE_BUFFERED,
+	O_I_WT_NO_WR_ALLOC,
+	O_I_WB_NO_WR_ALLOC,
+	O_I_NON_CACHEABLE,
+	O_I_WB_RD_WR_ALLOC,
+	DEVICE_NON_SHARED,
+};
+enum size {
+	REGION_8MB = 22,
+	REGION_16MB,
+	REGION_32MB,
+	REGION_64MB,
+	REGION_128MB,
+	REGION_256MB,
+	REGION_512MB,
+	REGION_1GB,
+	REGION_2GB,
+	REGION_4GB,
+};
+
+enum xn {
+	XN_DIS = 0,
+	XN_EN,
+};
+
+struct mpu_region_config {
+	uint32_t start_addr;
+	enum region_number region_no;
+	enum xn xn;
+	enum ap ap;
+	enum mr_attr mr_attr;
+	enum size reg_size;
+};
+
+void disable_mpu(void);
+void enable_mpu(void);
+int mpu_enabled(void);
+void mpu_config(struct mpu_region_config *reg_config);
+void setup_mpu_regions(struct mpu_region_config *rgns, u32 num_rgns);
+
+static inline u32 get_attr_encoding(u32 mr_attr)
+{
+	u32 attr;
+
+	switch (mr_attr) {
+	case STRONG_ORDER:
+		attr = SHAREABLE;
+		break;
+	case SHARED_WRITE_BUFFERED:
+		attr = BUFFERABLE;
+		break;
+	case O_I_WT_NO_WR_ALLOC:
+		attr = CACHEABLE;
+		break;
+	case O_I_WB_NO_WR_ALLOC:
+		attr = CACHEABLE | BUFFERABLE;
+		break;
+	case O_I_NON_CACHEABLE:
+		attr = 1 << TEX_SHIFT;
+		break;
+	case O_I_WB_RD_WR_ALLOC:
+		attr = (1 << TEX_SHIFT) | CACHEABLE | BUFFERABLE;
+		break;
+	case DEVICE_NON_SHARED:
+		attr = (2 << TEX_SHIFT) | BUFFERABLE;
+		break;
+	default:
+		attr = 0; /* strongly ordered */
+		break;
+	};
+
+	return attr;
+}
+
+#endif /* _ASM_ARMV7_MPU_H */
diff --git a/roms/u-boot/arch/arm/include/asm/armv7m.h b/roms/u-boot/arch/arm/include/asm/armv7m.h
new file mode 100644
index 000000000..ad67b4fa3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/armv7m.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010,2011
+ * Vladimir Khusainov, Emcraft Systems, vlad@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ */
+
+#ifndef ARMV7M_H
+#define ARMV7M_H
+
+/* armv7m fixed base addresses */
+#define V7M_SCS_BASE		0xE000E000
+#define V7M_NVIC_BASE		(V7M_SCS_BASE + 0x0100)
+#define V7M_SCB_BASE		(V7M_SCS_BASE + 0x0D00)
+#define V7M_PROC_FTR_BASE	(V7M_SCS_BASE + 0x0D78)
+#define V7M_MPU_BASE		(V7M_SCS_BASE + 0x0D90)
+#define V7M_FPU_BASE		(V7M_SCS_BASE + 0x0F30)
+#define V7M_CACHE_MAINT_BASE	(V7M_SCS_BASE + 0x0F50)
+#define V7M_ACCESS_CNTL_BASE	(V7M_SCS_BASE + 0x0F90)
+
+#define V7M_SCB_VTOR		0x08
+
+#if !defined(__ASSEMBLY__)
+struct v7m_scb {
+	uint32_t cpuid;		/* CPUID Base Register */
+	uint32_t icsr;		/* Interrupt Control and State Register */
+	uint32_t vtor;		/* Vector Table Offset Register */
+	uint32_t aircr;		/* App Interrupt and Reset Control Register */
+	uint32_t scr;		/* offset 0x10: System Control Register */
+	uint32_t ccr;		/* offset 0x14: Config and Control Register */
+	uint32_t shpr1;		/* offset 0x18: System Handler Priority Reg 1 */
+	uint32_t shpr2;		/* offset 0x1c: System Handler Priority Reg 2 */
+	uint32_t shpr3;		/* offset 0x20: System Handler Priority Reg 3 */
+	uint32_t shcrs;		/* offset 0x24: System Handler Control State */
+	uint32_t cfsr;		/* offset 0x28: Configurable Fault Status Reg */
+	uint32_t hfsr;		/* offset 0x2C: HardFault Status Register */
+	uint32_t res;		/* offset 0x30: reserved */
+	uint32_t mmar;		/* offset 0x34: MemManage Fault Address Reg */
+	uint32_t bfar;		/* offset 0x38: BusFault Address Reg */
+	uint32_t afsr;		/* offset 0x3C: Auxiliary Fault Status Reg */
+};
+#define V7M_SCB				((struct v7m_scb *)V7M_SCB_BASE)
+
+#define V7M_AIRCR_VECTKEY		0x5fa
+#define V7M_AIRCR_VECTKEY_SHIFT		16
+#define V7M_AIRCR_ENDIAN		(1 << 15)
+#define V7M_AIRCR_PRIGROUP_SHIFT	8
+#define V7M_AIRCR_PRIGROUP_MSK		(0x7 << V7M_AIRCR_PRIGROUP_SHIFT)
+#define V7M_AIRCR_SYSRESET		(1 << 2)
+
+#define V7M_ICSR_VECTACT_MSK		0xFF
+
+#define V7M_CCR_DCACHE			16
+#define V7M_CCR_ICACHE			17
+
+struct v7m_mpu {
+	uint32_t type;		/* Type Register */
+	uint32_t ctrl;		/* Control Register */
+	uint32_t rnr;		/* Region Number Register */
+	uint32_t rbar;		/* Region Base Address Register */
+	uint32_t rasr;		/* Region Attribute and Size Register */
+};
+#define V7M_MPU				((struct v7m_mpu *)V7M_MPU_BASE)
+
+#endif /* !defined(__ASSEMBLY__) */
+#endif /* ARMV7M_H */
diff --git a/roms/u-boot/arch/arm/include/asm/armv8/cpu.h b/roms/u-boot/arch/arm/include/asm/armv8/cpu.h
new file mode 100644
index 000000000..40d54dc85
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/armv8/cpu.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#define MIDR_PARTNUM_CORTEX_A35	0xD04
+#define MIDR_PARTNUM_CORTEX_A53	0xD03
+#define MIDR_PARTNUM_CORTEX_A72	0xD08
+#define MIDR_PARTNUM_SHIFT	0x4
+#define MIDR_PARTNUM_MASK	(0xFFF << 0x4)
+
+static inline unsigned int read_midr(void)
+{
+	unsigned long val;
+
+	asm volatile("mrs %0, midr_el1" : "=r" (val));
+
+	return val;
+}
+
+#define is_cortex_a35() (((read_midr() & MIDR_PARTNUM_MASK) >> \
+			 MIDR_PARTNUM_SHIFT) == MIDR_PARTNUM_CORTEX_A35)
+#define is_cortex_a53() (((read_midr() & MIDR_PARTNUM_MASK) >> \
+			 MIDR_PARTNUM_SHIFT) == MIDR_PARTNUM_CORTEX_A53)
+#define is_cortex_a72() (((read_midr() & MIDR_PARTNUM_MASK) >>\
+			 MIDR_PARTNUM_SHIFT) == MIDR_PARTNUM_CORTEX_A72)
diff --git a/roms/u-boot/arch/arm/include/asm/armv8/mmu.h b/roms/u-boot/arch/arm/include/asm/armv8/mmu.h
new file mode 100644
index 000000000..fc97c5511
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/armv8/mmu.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#ifndef _ASM_ARMV8_MMU_H_
+#define _ASM_ARMV8_MMU_H_
+
+#include <hang.h>
+#include <linux/const.h>
+
+/*
+ * block/section address mask and size definitions.
+ */
+
+/* PAGE_SHIFT determines the page size */
+#undef  PAGE_SIZE
+#define PAGE_SHIFT		12
+#define PAGE_SIZE		(1 << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE - 1))
+
+/***************************************************************/
+
+/*
+ * Memory types
+ */
+#define MT_DEVICE_NGNRNE	0
+#define MT_DEVICE_NGNRE		1
+#define MT_DEVICE_GRE		2
+#define MT_NORMAL_NC		3
+#define MT_NORMAL		4
+
+#define MEMORY_ATTRIBUTES	((0x00 << (MT_DEVICE_NGNRNE * 8)) |	\
+				(0x04 << (MT_DEVICE_NGNRE * 8))   |	\
+				(0x0c << (MT_DEVICE_GRE * 8))     |	\
+				(0x44 << (MT_NORMAL_NC * 8))      |	\
+				(UL(0xff) << (MT_NORMAL * 8)))
+
+/*
+ * Hardware page table definitions.
+ *
+ */
+
+#define PTE_TYPE_MASK		(3 << 0)
+#define PTE_TYPE_FAULT		(0 << 0)
+#define PTE_TYPE_TABLE		(3 << 0)
+#define PTE_TYPE_PAGE		(3 << 0)
+#define PTE_TYPE_BLOCK		(1 << 0)
+#define PTE_TYPE_VALID		(1 << 0)
+
+#define PTE_TABLE_PXN		(1UL << 59)
+#define PTE_TABLE_XN		(1UL << 60)
+#define PTE_TABLE_AP		(1UL << 61)
+#define PTE_TABLE_NS		(1UL << 63)
+
+/*
+ * Block
+ */
+#define PTE_BLOCK_MEMTYPE(x)	((x) << 2)
+#define PTE_BLOCK_NS            (1 << 5)
+#define PTE_BLOCK_NON_SHARE	(0 << 8)
+#define PTE_BLOCK_OUTER_SHARE	(2 << 8)
+#define PTE_BLOCK_INNER_SHARE	(3 << 8)
+#define PTE_BLOCK_AF		(1 << 10)
+#define PTE_BLOCK_NG		(1 << 11)
+#define PTE_BLOCK_PXN		(UL(1) << 53)
+#define PTE_BLOCK_UXN		(UL(1) << 54)
+
+/*
+ * AttrIndx[2:0]
+ */
+#define PMD_ATTRINDX(t)		((t) << 2)
+#define PMD_ATTRINDX_MASK	(7 << 2)
+#define PMD_ATTRMASK		(PTE_BLOCK_PXN		| \
+				 PTE_BLOCK_UXN		| \
+				 PMD_ATTRINDX_MASK	| \
+				 PTE_TYPE_VALID)
+
+/*
+ * TCR flags.
+ */
+#define TCR_T0SZ(x)		((64 - (x)) << 0)
+#define TCR_IRGN_NC		(0 << 8)
+#define TCR_IRGN_WBWA		(1 << 8)
+#define TCR_IRGN_WT		(2 << 8)
+#define TCR_IRGN_WBNWA		(3 << 8)
+#define TCR_IRGN_MASK		(3 << 8)
+#define TCR_ORGN_NC		(0 << 10)
+#define TCR_ORGN_WBWA		(1 << 10)
+#define TCR_ORGN_WT		(2 << 10)
+#define TCR_ORGN_WBNWA		(3 << 10)
+#define TCR_ORGN_MASK		(3 << 10)
+#define TCR_SHARED_NON		(0 << 12)
+#define TCR_SHARED_OUTER	(2 << 12)
+#define TCR_SHARED_INNER	(3 << 12)
+#define TCR_TG0_4K		(0 << 14)
+#define TCR_TG0_64K		(1 << 14)
+#define TCR_TG0_16K		(2 << 14)
+#define TCR_EPD1_DISABLE	(1 << 23)
+
+#define TCR_EL1_RSVD		(1 << 31)
+#define TCR_EL2_RSVD		(1 << 31 | 1 << 23)
+#define TCR_EL3_RSVD		(1 << 31 | 1 << 23)
+
+#ifndef __ASSEMBLY__
+static inline void set_ttbr_tcr_mair(int el, u64 table, u64 tcr, u64 attr)
+{
+	asm volatile("dsb sy");
+	if (el == 1) {
+		asm volatile("msr ttbr0_el1, %0" : : "r" (table) : "memory");
+		asm volatile("msr tcr_el1, %0" : : "r" (tcr) : "memory");
+		asm volatile("msr mair_el1, %0" : : "r" (attr) : "memory");
+	} else if (el == 2) {
+		asm volatile("msr ttbr0_el2, %0" : : "r" (table) : "memory");
+		asm volatile("msr tcr_el2, %0" : : "r" (tcr) : "memory");
+		asm volatile("msr mair_el2, %0" : : "r" (attr) : "memory");
+	} else if (el == 3) {
+		asm volatile("msr ttbr0_el3, %0" : : "r" (table) : "memory");
+		asm volatile("msr tcr_el3, %0" : : "r" (tcr) : "memory");
+		asm volatile("msr mair_el3, %0" : : "r" (attr) : "memory");
+	} else {
+		hang();
+	}
+	asm volatile("isb");
+}
+
+struct mm_region {
+	u64 virt;
+	u64 phys;
+	u64 size;
+	u64 attrs;
+};
+
+extern struct mm_region *mem_map;
+void setup_pgtables(void);
+u64 get_tcr(int el, u64 *pips, u64 *pva_bits);
+#endif
+
+#endif /* _ASM_ARMV8_MMU_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/armv8/sec_firmware.h b/roms/u-boot/arch/arm/include/asm/armv8/sec_firmware.h
new file mode 100644
index 000000000..0f86c72b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/armv8/sec_firmware.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 NXP Semiconductor, Inc.
+ */
+
+#ifndef __SEC_FIRMWARE_H_
+#define __SEC_FIRMWARE_H_
+
+#define PSCI_INVALID_VER		0xffffffff
+#define SEC_JR3_OFFSET			0x40000
+#define WORD_MASK			0xffffffff
+#define WORD_SHIFT			32
+
+int sec_firmware_init(const void *, u32 *, u32 *, u32 *, u32 *);
+int _sec_firmware_entry(const void *, u32 *, u32 *);
+bool sec_firmware_is_valid(const void *);
+bool sec_firmware_support_hwrng(void);
+int sec_firmware_get_random(uint8_t *rand, int bytes);
+int fdt_fixup_kaslr(void *fdt);
+#ifdef CONFIG_SEC_FIRMWARE_ARMV8_PSCI
+unsigned int sec_firmware_support_psci_version(void);
+unsigned int _sec_firmware_support_psci_version(void);
+#else
+static inline unsigned int sec_firmware_support_psci_version(void)
+{
+	return PSCI_INVALID_VER;
+}
+#endif
+
+static inline unsigned int sec_firmware_used_jobring_offset(void)
+{
+	return SEC_JR3_OFFSET;
+}
+
+#endif /* __SEC_FIRMWARE_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/assembler.h b/roms/u-boot/arch/arm/include/asm/assembler.h
new file mode 100644
index 000000000..b14691858
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/assembler.h
@@ -0,0 +1,84 @@
+/*
+ *  arch/arm/include/asm/assembler.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains arm architecture specific defines
+ *  for the different processors.
+ *
+ *  Do not include any C declarations in this file - it is included by
+ *  assembler source.
+ */
+
+#include <config.h>
+#include <asm/unified.h>
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#ifndef __ARMEB__
+#define lspull		lsr
+#define lspush		lsl
+#define get_byte_0	lsl #0
+#define get_byte_1	lsr #8
+#define get_byte_2	lsr #16
+#define get_byte_3	lsr #24
+#define put_byte_0	lsl #0
+#define put_byte_1	lsl #8
+#define put_byte_2	lsl #16
+#define put_byte_3	lsl #24
+#else
+#define lspull		lsl
+#define lspush		lsr
+#define get_byte_0	lsr #24
+#define get_byte_1	lsr #16
+#define get_byte_2	lsr #8
+#define get_byte_3      lsl #0
+#define put_byte_0	lsl #24
+#define put_byte_1	lsl #16
+#define put_byte_2	lsl #8
+#define put_byte_3      lsl #0
+#endif
+
+/*
+ * Data preload for architectures that support it
+ */
+#if defined(__ARM_ARCH_5E__) || defined(__ARM_ARCH_5TE__) || \
+	defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) || \
+	defined(__ARM_ARCH_6T2__) || defined(__ARM_ARCH_6Z__) || \
+	defined(__ARM_ARCH_6ZK__) || defined(__ARM_ARCH_7A__) || \
+	defined(__ARM_ARCH_7R__)
+#define PLD(code...)	code
+#else
+#define PLD(code...)
+#endif
+
+/*
+ * We only support cores that support at least Thumb-1 and thus we use
+ * 'bx lr'
+ */
+	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+	.macro	ret\c, reg
+	.ifeqs	"\reg", "lr"
+	bx\c	\reg
+	.else
+	mov\c	pc, \reg
+	.endif
+	.endm
+	.endr
+
+/*
+ * Cache aligned, used for optimized memcpy/memset
+ * In the kernel this is only enabled for Feroceon CPU's...
+ * We disable it especially for Thumb builds since those instructions
+ * are not made in a Thumb ready way...
+ */
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+#define CALGN(code...)
+#else
+#define CALGN(code...) code
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/atomic.h b/roms/u-boot/arch/arm/include/asm/atomic.h
new file mode 100644
index 000000000..5822b0a52
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/atomic.h
@@ -0,0 +1,32 @@
+/*
+ *  linux/include/asm-arm/atomic.h
+ *
+ *  Copyright (c) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ *   13-04-1997	RMK	Made functions atomic!
+ *   07-12-1997	RMK	Upgraded for v2.1.
+ *   26-08-1998	PJB	Added #ifdef __KERNEL__
+ */
+#ifndef __ASM_ARM_ATOMIC_H
+#define __ASM_ARM_ATOMIC_H
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#include <asm/proc-armv/system.h>
+#include <asm-generic/atomic.h>
+
+/* Atomic operations are already serializing on ARM */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/barriers.h b/roms/u-boot/arch/arm/include/asm/barriers.h
new file mode 100644
index 000000000..75b9eb4bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/barriers.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * ARM and ARM64 barrier instructions
+ * split from armv7.h to allow sharing between ARM and ARM64
+ *
+ * Original copyright in armv7.h was:
+ * (C) Copyright 2010 Texas Instruments, <www.ti.com> Aneesh V <aneesh@ti.com>
+ *
+ * Much of the original barrier code was contributed by:
+ *   Valentine Barshak <valentine.barshak@cogentembedded.com>
+ */
+#ifndef __BARRIERS_H__
+#define __BARRIERS_H__
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_ARM64
+/*
+ * CP15 Barrier instructions
+ * Please note that we have separate barrier instructions in ARMv7
+ * However, we use the CP15 based instructtions because we use
+ * -march=armv5 in U-Boot
+ */
+#define CP15ISB	asm volatile ("mcr     p15, 0, %0, c7, c5, 4" : : "r" (0))
+#define CP15DSB	asm volatile ("mcr     p15, 0, %0, c7, c10, 4" : : "r" (0))
+#define CP15DMB	asm volatile ("mcr     p15, 0, %0, c7, c10, 5" : : "r" (0))
+
+#endif /* !CONFIG_ARM64 */
+
+#if __LINUX_ARM_ARCH__ >= 7
+#define ISB	asm volatile ("isb sy" : : : "memory")
+#define DSB	asm volatile ("dsb sy" : : : "memory")
+#define DMB	asm volatile ("dmb sy" : : : "memory")
+#elif __LINUX_ARM_ARCH__ == 6
+#define ISB	CP15ISB
+#define DSB	CP15DSB
+#define DMB	CP15DMB
+#else
+#define ISB	asm volatile ("" : : : "memory")
+#define DSB	CP15DSB
+#define DMB	asm volatile ("" : : : "memory")
+#endif
+
+#define isb()	ISB
+#define dsb()	DSB
+#define dmb()	DMB
+#endif	/* __ASSEMBLY__ */
+#endif	/* __BARRIERS_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/bitops.h b/roms/u-boot/arch/arm/include/asm/bitops.h
new file mode 100644
index 000000000..fa8548624
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/bitops.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright 1995, Russell King.
+ * Various bits and pieces copyrights include:
+ *  Linus Torvalds (test_bit).
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ *
+ * Please note that the code in this file should never be included
+ * from user space.  Many of these are not implemented in assembler
+ * since they would be too costly.  Also, they require priviledged
+ * instructions (which are not available from user mode) to ensure
+ * that they are atomic.
+ */
+
+#ifndef __ASM_ARM_BITOPS_H
+#define __ASM_ARM_BITOPS_H
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+#include <asm/proc-armv/system.h>
+
+#define smp_mb__before_clear_bit()	do { } while (0)
+#define smp_mb__after_clear_bit()	do { } while (0)
+
+/*
+ * Function prototypes to keep gcc -Wall happy.
+ */
+extern void set_bit(int nr, volatile void * addr);
+
+extern void clear_bit(int nr, volatile void * addr);
+
+extern void change_bit(int nr, volatile void * addr);
+
+static inline void __change_bit(int nr, volatile void *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	*p ^= mask;
+}
+
+static inline int __test_and_set_bit(int nr, volatile void *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old | mask;
+	return (old & mask) != 0;
+}
+
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+	unsigned long flags = 0;
+	int out;
+
+	local_irq_save(flags);
+	out = __test_and_set_bit(nr, addr);
+	local_irq_restore(flags);
+
+	return out;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile void *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old & ~mask;
+	return (old & mask) != 0;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+	unsigned long flags = 0;
+	int out;
+
+	local_irq_save(flags);
+	out = __test_and_clear_bit(nr, addr);
+	local_irq_restore(flags);
+
+	return out;
+}
+
+extern int test_and_change_bit(int nr, volatile void * addr);
+
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old ^ mask;
+	return (old & mask) != 0;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int test_bit(int nr, const void * addr)
+{
+    return ((unsigned char *) addr)[nr >> 3] & (1U << (nr & 7));
+}
+
+static inline int __ilog2(unsigned int x)
+{
+	return generic_fls(x) - 1;
+}
+
+#define ffz(x)  __ffs(~(x))
+
+static inline int find_next_zero_bit(void *addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *)addr) + (offset / BITS_PER_LONG);
+	unsigned long result = offset & ~(BITS_PER_LONG - 1);
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= (BITS_PER_LONG - 1);
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (BITS_PER_LONG - offset);
+		if (size < BITS_PER_LONG)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= BITS_PER_LONG;
+		result += BITS_PER_LONG;
+	}
+	while (size & ~(BITS_PER_LONG - 1)) {
+		tmp = *(p++);
+		if (~tmp)
+			goto found_middle;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL << size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+
+#define ext2_set_bit			test_and_set_bit
+#define ext2_clear_bit			test_and_clear_bit
+#define ext2_test_bit			test_bit
+#define ext2_find_first_zero_bit	find_first_zero_bit
+#define ext2_find_next_zero_bit		find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem. */
+#define minix_test_and_set_bit(nr,addr)	test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr)		set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr)	test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr)		test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size)	find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ARM_BITOPS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/boot0-linux-kernel-header.h b/roms/u-boot/arch/arm/include/asm/boot0-linux-kernel-header.h
new file mode 100644
index 000000000..c6cd76f32
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/boot0-linux-kernel-header.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2017 NVIDIA Corporation <www.nvidia.com>
+ *
+ * Derived from Linux kernel v4.14 files:
+ *
+ * arch/arm64/include/asm/assembler.h:
+ * Based on arch/arm/include/asm/assembler.h, arch/arm/mm/proc-macros.S
+ * Copyright (C) 1996-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * arch/arm64/kernel/head.S:
+ * Based on arch/arm/kernel/head.S
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (C) 2003-2012 ARM Ltd.
+ * Authors:	Catalin Marinas <catalin.marinas@arm.com>
+ *		Will Deacon <will.deacon@arm.com>
+ *
+ * arch/arm64/kernel/image.h:
+ * Copyright (C) 2014 ARM Ltd.
+ */
+
+	/*
+	 * Emit a 64-bit absolute little endian symbol reference in a way that
+	 * ensures that it will be resolved at build time, even when building a
+	 * PIE binary. This requires cooperation from the linker script, which
+	 * must emit the lo32/hi32 halves individually.
+	 */
+	.macro	le64sym, sym
+	.long	\sym\()_lo32
+	.long	\sym\()_hi32
+	.endm
+
+.globl _start
+_start:
+	/*
+	 * DO NOT MODIFY. Image header expected by Linux boot-loaders.
+	 */
+	b	reset				/* branch to kernel start, magic */
+	.long	0				/* reserved */
+	le64sym	_kernel_offset_le		/* Image load offset from start of RAM, little-endian */
+	le64sym	_kernel_size_le			/* Effective size of kernel image, little-endian */
+	le64sym	_kernel_flags_le		/* Informative flags, little-endian */
+	.quad	0				/* reserved */
+	.quad	0				/* reserved */
+	.quad	0				/* reserved */
+	.ascii	"ARM\x64"			/* Magic number */
+	.long	0				/* reserved */
diff --git a/roms/u-boot/arch/arm/include/asm/bootm.h b/roms/u-boot/arch/arm/include/asm/bootm.h
new file mode 100644
index 000000000..a2131ca07
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/bootm.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2013, Google Inc.
+ *
+ * Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ */
+#ifndef ARM_BOOTM_H
+#define ARM_BOOTM_H
+
+extern void udc_disconnect(void);
+
+#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
+		defined(CONFIG_CMDLINE_TAG) || \
+		defined(CONFIG_INITRD_TAG) || \
+		defined(CONFIG_SERIAL_TAG) || \
+		defined(CONFIG_REVISION_TAG)
+# define BOOTM_ENABLE_TAGS		1
+#else
+# define BOOTM_ENABLE_TAGS		0
+#endif
+
+#ifdef CONFIG_SETUP_MEMORY_TAGS
+# define BOOTM_ENABLE_MEMORY_TAGS	1
+#else
+# define BOOTM_ENABLE_MEMORY_TAGS	0
+#endif
+
+#ifdef CONFIG_CMDLINE_TAG
+ #define BOOTM_ENABLE_CMDLINE_TAG	1
+#else
+ #define BOOTM_ENABLE_CMDLINE_TAG	0
+#endif
+
+#ifdef CONFIG_INITRD_TAG
+ #define BOOTM_ENABLE_INITRD_TAG	1
+#else
+ #define BOOTM_ENABLE_INITRD_TAG	0
+#endif
+
+struct tag_serialnr;
+#ifdef CONFIG_SERIAL_TAG
+ #define BOOTM_ENABLE_SERIAL_TAG	1
+void get_board_serial(struct tag_serialnr *serialnr);
+#else
+ #define BOOTM_ENABLE_SERIAL_TAG	0
+static inline void get_board_serial(struct tag_serialnr *serialnr)
+{
+}
+#endif
+
+#ifdef CONFIG_REVISION_TAG
+ #define BOOTM_ENABLE_REVISION_TAG	1
+u32 get_board_rev(void);
+#else
+ #define BOOTM_ENABLE_REVISION_TAG	0
+static inline u32 get_board_rev(void)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/byteorder.h b/roms/u-boot/arch/arm/include/asm/byteorder.h
new file mode 100644
index 000000000..20cce7657
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/byteorder.h
@@ -0,0 +1,32 @@
+/*
+ *  linux/include/asm-arm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ * When in big endian mode, byte accesses appear as:
+ *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef __ASM_ARM_BYTEORDER_H
+#define __ASM_ARM_BYTEORDER_H
+
+
+#include <asm/types.h>
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#if defined(__ARMEB__) || defined(__AARCH64EB__)
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/cache.h b/roms/u-boot/arch/arm/include/asm/cache.h
new file mode 100644
index 000000000..b10edf805
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/cache.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/system.h>
+
+#ifndef CONFIG_ARM64
+
+/*
+ * Invalidate L2 Cache using co-proc instruction
+ */
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+void invalidate_l2_cache(void);
+#else
+static inline void invalidate_l2_cache(void)
+{
+	unsigned int val=0;
+
+	asm volatile("mcr p15, 1, %0, c15, c11, 0 @ invl l2 cache"
+		: : "r" (val) : "cc");
+	isb();
+}
+#endif
+
+int check_cache_range(unsigned long start, unsigned long stop);
+
+void l2_cache_enable(void);
+void l2_cache_disable(void);
+void set_section_dcache(int section, enum dcache_option option);
+
+void arm_init_before_mmu(void);
+void cpu_cache_initialization(void);
+void dram_bank_mmu_setup(int bank);
+
+#endif
+
+/*
+ * The value of the largest data cache relevant to DMA operations shall be set
+ * for us in CONFIG_SYS_CACHELINE_SIZE.  In some cases this may be a larger
+ * value than found in the L1 cache but this is OK to use in terms of
+ * alignment.
+ */
+#define ARCH_DMA_MINALIGN	CONFIG_SYS_CACHELINE_SIZE
+
+/*
+ * arm_reserve_mmu() - Reserve memory for MMU TLB table
+ *
+ * Default implementation for reserving memory for MMU TLB table. It is used
+ * during generic board init sequence in common/board_f.c. Weakly defined, so
+ * that machines can override it if needed.
+ *
+ * Return: 0 if OK
+ */
+int arm_reserve_mmu(void);
+
+#endif /* _ASM_CACHE_H */
diff --git a/roms/u-boot/arch/arm/include/asm/config.h b/roms/u-boot/arch/arm/include/asm/config.h
new file mode 100644
index 000000000..14860d89b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/config.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _ASM_CONFIG_H_
+#define _ASM_CONFIG_H_
+
+#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+
+#if defined(CONFIG_ARCH_LS1021A) || \
+	defined(CONFIG_CPU_PXA27X) || \
+	defined(CONFIG_CPU_MONAHANS) || \
+	defined(CONFIG_CPU_PXA25X) || \
+	defined(CONFIG_FSL_LAYERSCAPE)
+#include <asm/arch/config.h>
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/davinci_rtc.h b/roms/u-boot/arch/arm/include/asm/davinci_rtc.h
new file mode 100644
index 000000000..7894bd9ce
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/davinci_rtc.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * -------------------------------------------------------------------------
+ *
+ *  linux/include/asm-arm/arch-davinci/hardware.h
+ *
+ *  Copyright (C) 2006 Texas Instruments.
+ */
+#ifndef __ASM_DAVINCI_RTC_H
+#define __ASM_DAVINCI_RTC_H
+
+struct davinci_rtc {
+	unsigned int	second;
+	unsigned int	minutes;
+	unsigned int	hours;
+	unsigned int	day;
+	unsigned int	month; /* 0x10 */
+	unsigned int	year;
+	unsigned int	dotw;
+	unsigned int	resv1;
+	unsigned int	alarmsecond; /* 0x20 */
+	unsigned int	alarmminute;
+	unsigned int	alarmhour;
+	unsigned int	alarmday;
+	unsigned int	alarmmonth; /* 0x30 */
+	unsigned int	alarmyear;
+	unsigned int	resv2[2];
+	unsigned int	ctrl; /* 0x40 */
+	unsigned int	status;
+	unsigned int	irq;
+	unsigned int	complsb;
+	unsigned int	compmsb; /* 0x50 */
+	unsigned int	osc;
+	unsigned int	resv3[2];
+	unsigned int	scratch0; /* 0x60 */
+	unsigned int	scratch1;
+	unsigned int	scratch2;
+	unsigned int	kick0r;
+	unsigned int	kick1r; /* 0x70 */
+};
+
+#define RTC_STATE_BUSY	0x01
+#define RTC_STATE_RUN	0x02
+
+#define RTC_KICK0R_WE	0x83e70b13
+#define RTC_KICK1R_WE	0x95a4f1e0
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/dma-mapping.h b/roms/u-boot/arch/arm/include/asm/dma-mapping.h
new file mode 100644
index 000000000..8af1ea0aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/dma-mapping.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+#ifndef __ASM_ARM_DMA_MAPPING_H
+#define __ASM_ARM_DMA_MAPPING_H
+
+#include <asm/cache.h>
+#include <cpu_func.h>
+#include <linux/dma-direction.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <malloc.h>
+
+static inline void *dma_alloc_coherent(size_t len, unsigned long *handle)
+{
+	*handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, ROUND(len, ARCH_DMA_MINALIGN));
+	return (void *)*handle;
+}
+
+static inline void dma_free_coherent(void *addr)
+{
+	free(addr);
+}
+
+#endif /* __ASM_ARM_DMA_MAPPING_H */
diff --git a/roms/u-boot/arch/arm/include/asm/ehci-omap.h b/roms/u-boot/arch/arm/include/asm/ehci-omap.h
new file mode 100644
index 000000000..f970bba93
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ehci-omap.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * OMAP EHCI port support
+ * Based on LINUX KERNEL
+ * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com*
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ */
+
+#ifndef _OMAP_COMMON_EHCI_H_
+#define _OMAP_COMMON_EHCI_H_
+
+enum usbhs_omap_port_mode {
+	OMAP_USBHS_PORT_MODE_UNUSED,
+	OMAP_EHCI_PORT_MODE_PHY,
+	OMAP_EHCI_PORT_MODE_TLL,
+	OMAP_EHCI_PORT_MODE_HSIC,
+};
+
+#define OMAP_HS_USB_PORTS	3
+
+#define is_ehci_phy_mode(x)	((x) == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)	((x) == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)	((x) == OMAP_EHCI_PORT_MODE_HSIC)
+
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_USBHS_REV1					0x00000010 /* OMAP3 */
+#define OMAP_USBHS_REV2					0x50700100 /* OMAP4 */
+#define OMAP_USBHS_REV2_1				0x50700101 /* OMAP5 */
+
+/* UHH Register Set */
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
+
+#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		1
+#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
+#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
+#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)
+
+#define OMAP_P1_MODE_CLEAR				(3 << 16)
+#define OMAP_P1_MODE_TLL				(1 << 16)
+#define OMAP_P1_MODE_HSIC				(3 << 16)
+#define OMAP_P2_MODE_CLEAR				(3 << 18)
+#define OMAP_P2_MODE_TLL				(1 << 18)
+#define OMAP_P2_MODE_HSIC				(3 << 18)
+#define OMAP_P3_MODE_CLEAR				(3 << 20)
+#define OMAP_P3_MODE_HSIC				(3 << 20)
+
+/* EHCI Register Set */
+#define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)
+#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT		31
+#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT		24
+#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT			22
+#define EHCI_INSNREG05_ULPI_REGADD_SHIFT		16
+
+#define OMAP_REV1_TLL_CHANNEL_COUNT			3
+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
+
+/* TLL Register Set */
+#define OMAP_TLL_CHANNEL_CONF(num)			(0x004 * num)
+#define OMAP_TLL_CHANNEL_CONF_DRVVBUS			(1 << 16)
+#define OMAP_TLL_CHANNEL_CONF_CHRGVBUS			(1 << 15)
+#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
+#define OMAP_TLL_CHANNEL_CONF_CHANMODE_TRANSPARENT_UTMI	(2 << 1)
+#define OMAP_TLL_CHANNEL_CONF_CHANEN			1
+
+struct omap_usbhs_board_data {
+	enum usbhs_omap_port_mode port_mode[OMAP_HS_USB_PORTS];
+};
+
+struct omap_usbtll {
+	u32 rev;		/* 0x00 */
+	u32 hwinfo;		/* 0x04 */
+	u8 reserved1[0x8];
+	u32 sysc;		/* 0x10 */
+	u32 syss;		/* 0x14 */
+	u32 irqst;		/* 0x18 */
+	u32 irqen;		/* 0x1c */
+	u8 reserved2[0x10];
+	u32 shared_conf;	/* 0x30 */
+	u8 reserved3[0xc];
+	u32 channel_conf;	/* 0x40 */
+};
+
+struct omap_uhh {
+	u32 rev;	/* 0x00 */
+	u32 hwinfo;	/* 0x04 */
+	u8 reserved1[0x8];
+	u32 sysc;	/* 0x10 */
+	u32 syss;	/* 0x14 */
+	u8 reserved2[0x28];
+	u32 hostconfig;	/* 0x40 */
+	u32 debugcsr;	/* 0x44 */
+};
+
+struct omap_ehci {
+	u32 hccapbase;		/* 0x00 */
+	u32 hcsparams;		/* 0x04 */
+	u32 hccparams;		/* 0x08 */
+	u8 reserved1[0x04];
+	u32 usbcmd;		/* 0x10 */
+	u32 usbsts;		/* 0x14 */
+	u32 usbintr;		/* 0x18 */
+	u32 frindex;		/* 0x1c */
+	u32 ctrldssegment;	/* 0x20 */
+	u32 periodiclistbase;	/* 0x24 */
+	u32 asysnclistaddr;	/* 0x28 */
+	u8 reserved2[0x24];
+	u32 configflag;		/* 0x50 */
+	u32 portsc_i;		/* 0x54 */
+	u8 reserved3[0x38];
+	u32 insreg00;		/* 0x90 */
+	u32 insreg01;		/* 0x94 */
+	u32 insreg02;		/* 0x98 */
+	u32 insreg03;		/* 0x9c */
+	u32 insreg04;		/* 0xa0 */
+	u32 insreg05_utmi_ulpi;	/* 0xa4 */
+	u32 insreg06;		/* 0xa8 */
+	u32 insreg07;		/* 0xac */
+	u32 insreg08;		/* 0xb0 */
+};
+
+#if !CONFIG_IS_ENABLED(DM_USB) || !CONFIG_IS_ENABLED(OF_CONTROL)
+/*
+ * FIXME: forward declaration of this structs needed because omap got the
+ * ehci implementation backwards. move out ehci_hcd_x from board files
+ */
+struct ehci_hccr;
+struct ehci_hcor;
+
+int omap_ehci_hcd_init(int index, struct omap_usbhs_board_data *usbhs_pdata,
+		       struct ehci_hccr **hccr, struct ehci_hcor **hcor);
+int omap_ehci_hcd_stop(void);
+#endif
+
+#endif /* _OMAP_COMMON_EHCI_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/emif.h b/roms/u-boot/arch/arm/include/asm/emif.h
new file mode 100644
index 000000000..35424345b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/emif.h
@@ -0,0 +1,1303 @@
+/*
+ * OMAP44xx EMIF header
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EMIF_H_
+#define _EMIF_H_
+#include <asm/types.h>
+#include <asm/io.h>
+
+/* Base address */
+#ifndef EMIF1_BASE
+#define EMIF1_BASE				0x4c000000
+#endif
+#define EMIF2_BASE				0x4d000000
+
+#define EMIF_4D					0x4
+#define EMIF_4D5				0x5
+
+/* Registers shifts, masks and values */
+
+/* EMIF_MOD_ID_REV */
+#define EMIF_REG_SCHEME_SHIFT			30
+#define EMIF_REG_SCHEME_MASK			(0x3 << 30)
+#define EMIF_REG_MODULE_ID_SHIFT			16
+#define EMIF_REG_MODULE_ID_MASK			(0xfff << 16)
+#define EMIF_REG_RTL_VERSION_SHIFT			11
+#define EMIF_REG_RTL_VERSION_MASK			(0x1f << 11)
+#define EMIF_REG_MAJOR_REVISION_SHIFT		8
+#define EMIF_REG_MAJOR_REVISION_MASK		(0x7 << 8)
+#define EMIF_REG_MINOR_REVISION_SHIFT		0
+#define EMIF_REG_MINOR_REVISION_MASK		(0x3f << 0)
+
+/* STATUS */
+#define EMIF_REG_BE_SHIFT				31
+#define EMIF_REG_BE_MASK				(1 << 31)
+#define EMIF_REG_DUAL_CLK_MODE_SHIFT		30
+#define EMIF_REG_DUAL_CLK_MODE_MASK			(1 << 30)
+#define EMIF_REG_FAST_INIT_SHIFT			29
+#define EMIF_REG_FAST_INIT_MASK			(1 << 29)
+#define EMIF_REG_LEVLING_TO_SHIFT		4
+#define EMIF_REG_LEVELING_TO_MASK		(7 << 4)
+#define EMIF_REG_PHY_DLL_READY_SHIFT		2
+#define EMIF_REG_PHY_DLL_READY_MASK			(1 << 2)
+
+/* SDRAM_CONFIG */
+#define EMIF_REG_SDRAM_TYPE_SHIFT			29
+#define EMIF_REG_SDRAM_TYPE_MASK			(0x7 << 29)
+#define EMIF_REG_SDRAM_TYPE_DDR1			0
+#define EMIF_REG_SDRAM_TYPE_LPDDR1			1
+#define EMIF_REG_SDRAM_TYPE_DDR2			2
+#define EMIF_REG_SDRAM_TYPE_DDR3			3
+#define EMIF_REG_SDRAM_TYPE_LPDDR2_S4			4
+#define EMIF_REG_SDRAM_TYPE_LPDDR2_S2			5
+#define EMIF_REG_IBANK_POS_SHIFT			27
+#define EMIF_REG_IBANK_POS_MASK			(0x3 << 27)
+#define EMIF_REG_DDR_TERM_SHIFT			24
+#define EMIF_REG_DDR_TERM_MASK			(0x7 << 24)
+#define EMIF_REG_DDR2_DDQS_SHIFT			23
+#define EMIF_REG_DDR2_DDQS_MASK			(1 << 23)
+#define EMIF_REG_DYN_ODT_SHIFT			21
+#define EMIF_REG_DYN_ODT_MASK			(0x3 << 21)
+#define EMIF_REG_DDR_DISABLE_DLL_SHIFT		20
+#define EMIF_REG_DDR_DISABLE_DLL_MASK		(1 << 20)
+#define EMIF_REG_SDRAM_DRIVE_SHIFT			18
+#define EMIF_REG_SDRAM_DRIVE_MASK			(0x3 << 18)
+#define EMIF_REG_CWL_SHIFT				16
+#define EMIF_REG_CWL_MASK				(0x3 << 16)
+#define EMIF_REG_NARROW_MODE_SHIFT			14
+#define EMIF_REG_NARROW_MODE_MASK			(0x3 << 14)
+#define EMIF_REG_CL_SHIFT				10
+#define EMIF_REG_CL_MASK				(0xf << 10)
+#define EMIF_REG_ROWSIZE_SHIFT			7
+#define EMIF_REG_ROWSIZE_MASK			(0x7 << 7)
+#define EMIF_REG_IBANK_SHIFT			4
+#define EMIF_REG_IBANK_MASK				(0x7 << 4)
+#define EMIF_REG_EBANK_SHIFT			3
+#define EMIF_REG_EBANK_MASK				(1 << 3)
+#define EMIF_REG_PAGESIZE_SHIFT			0
+#define EMIF_REG_PAGESIZE_MASK			(0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define EMIF_REG_CS1NVMEN_SHIFT			30
+#define EMIF_REG_CS1NVMEN_MASK			(1 << 30)
+#define EMIF_REG_EBANK_POS_SHIFT			27
+#define EMIF_REG_EBANK_POS_MASK			(1 << 27)
+#define EMIF_REG_RDBNUM_SHIFT			4
+#define EMIF_REG_RDBNUM_MASK			(0x3 << 4)
+#define EMIF_REG_RDBSIZE_SHIFT			0
+#define EMIF_REG_RDBSIZE_MASK			(0x7 << 0)
+
+/* SDRAM_REF_CTRL */
+#define EMIF_REG_INITREF_DIS_SHIFT			31
+#define EMIF_REG_INITREF_DIS_MASK			(1 << 31)
+#define EMIF_REG_SRT_SHIFT				29
+#define EMIF_REG_SRT_MASK				(1 << 29)
+#define EMIF_REG_ASR_SHIFT				28
+#define EMIF_REG_ASR_MASK				(1 << 28)
+#define EMIF_REG_PASR_SHIFT				24
+#define EMIF_REG_PASR_MASK				(0x7 << 24)
+#define EMIF_REG_REFRESH_RATE_SHIFT			0
+#define EMIF_REG_REFRESH_RATE_MASK			(0xffff << 0)
+
+/* SDRAM_REF_CTRL_SHDW */
+#define EMIF_REG_REFRESH_RATE_SHDW_SHIFT		0
+#define EMIF_REG_REFRESH_RATE_SHDW_MASK		(0xffff << 0)
+
+/* SDRAM_TIM_1 */
+#define EMIF_REG_T_RP_SHIFT				25
+#define EMIF_REG_T_RP_MASK				(0xf << 25)
+#define EMIF_REG_T_RCD_SHIFT			21
+#define EMIF_REG_T_RCD_MASK				(0xf << 21)
+#define EMIF_REG_T_WR_SHIFT				17
+#define EMIF_REG_T_WR_MASK				(0xf << 17)
+#define EMIF_REG_T_RAS_SHIFT			12
+#define EMIF_REG_T_RAS_MASK				(0x1f << 12)
+#define EMIF_REG_T_RC_SHIFT				6
+#define EMIF_REG_T_RC_MASK				(0x3f << 6)
+#define EMIF_REG_T_RRD_SHIFT			3
+#define EMIF_REG_T_RRD_MASK				(0x7 << 3)
+#define EMIF_REG_T_WTR_SHIFT			0
+#define EMIF_REG_T_WTR_MASK				(0x7 << 0)
+
+/* SDRAM_TIM_1_SHDW */
+#define EMIF_REG_T_RP_SHDW_SHIFT			25
+#define EMIF_REG_T_RP_SHDW_MASK			(0xf << 25)
+#define EMIF_REG_T_RCD_SHDW_SHIFT			21
+#define EMIF_REG_T_RCD_SHDW_MASK			(0xf << 21)
+#define EMIF_REG_T_WR_SHDW_SHIFT			17
+#define EMIF_REG_T_WR_SHDW_MASK			(0xf << 17)
+#define EMIF_REG_T_RAS_SHDW_SHIFT			12
+#define EMIF_REG_T_RAS_SHDW_MASK			(0x1f << 12)
+#define EMIF_REG_T_RC_SHDW_SHIFT			6
+#define EMIF_REG_T_RC_SHDW_MASK			(0x3f << 6)
+#define EMIF_REG_T_RRD_SHDW_SHIFT			3
+#define EMIF_REG_T_RRD_SHDW_MASK			(0x7 << 3)
+#define EMIF_REG_T_WTR_SHDW_SHIFT			0
+#define EMIF_REG_T_WTR_SHDW_MASK			(0x7 << 0)
+
+/* SDRAM_TIM_2 */
+#define EMIF_REG_T_XP_SHIFT				28
+#define EMIF_REG_T_XP_MASK				(0x7 << 28)
+#define EMIF_REG_T_ODT_SHIFT			25
+#define EMIF_REG_T_ODT_MASK				(0x7 << 25)
+#define EMIF_REG_T_XSNR_SHIFT			16
+#define EMIF_REG_T_XSNR_MASK			(0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHIFT			6
+#define EMIF_REG_T_XSRD_MASK			(0x3ff << 6)
+#define EMIF_REG_T_RTP_SHIFT			3
+#define EMIF_REG_T_RTP_MASK				(0x7 << 3)
+#define EMIF_REG_T_CKE_SHIFT			0
+#define EMIF_REG_T_CKE_MASK				(0x7 << 0)
+
+/* SDRAM_TIM_2_SHDW */
+#define EMIF_REG_T_XP_SHDW_SHIFT			28
+#define EMIF_REG_T_XP_SHDW_MASK			(0x7 << 28)
+#define EMIF_REG_T_ODT_SHDW_SHIFT			25
+#define EMIF_REG_T_ODT_SHDW_MASK			(0x7 << 25)
+#define EMIF_REG_T_XSNR_SHDW_SHIFT			16
+#define EMIF_REG_T_XSNR_SHDW_MASK			(0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHDW_SHIFT			6
+#define EMIF_REG_T_XSRD_SHDW_MASK			(0x3ff << 6)
+#define EMIF_REG_T_RTP_SHDW_SHIFT			3
+#define EMIF_REG_T_RTP_SHDW_MASK			(0x7 << 3)
+#define EMIF_REG_T_CKE_SHDW_SHIFT			0
+#define EMIF_REG_T_CKE_SHDW_MASK			(0x7 << 0)
+
+/* SDRAM_TIM_3 */
+#define EMIF_REG_T_CKESR_SHIFT			21
+#define EMIF_REG_T_CKESR_MASK			(0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHIFT			15
+#define EMIF_REG_ZQ_ZQCS_MASK			(0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHIFT			13
+#define EMIF_REG_T_TDQSCKMAX_MASK			(0x3 << 13)
+#define EMIF_REG_T_RFC_SHIFT			4
+#define EMIF_REG_T_RFC_MASK				(0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHIFT			0
+#define EMIF_REG_T_RAS_MAX_MASK			(0xf << 0)
+
+/* SDRAM_TIM_3_SHDW */
+#define EMIF_REG_T_CKESR_SHDW_SHIFT			21
+#define EMIF_REG_T_CKESR_SHDW_MASK			(0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHDW_SHIFT			15
+#define EMIF_REG_ZQ_ZQCS_SHDW_MASK			(0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHDW_SHIFT		13
+#define EMIF_REG_T_TDQSCKMAX_SHDW_MASK		(0x3 << 13)
+#define EMIF_REG_T_RFC_SHDW_SHIFT			4
+#define EMIF_REG_T_RFC_SHDW_MASK			(0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHDW_SHIFT		0
+#define EMIF_REG_T_RAS_MAX_SHDW_MASK		(0xf << 0)
+
+/* LPDDR2_NVM_TIM */
+#define EMIF_REG_NVM_T_XP_SHIFT			28
+#define EMIF_REG_NVM_T_XP_MASK			(0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHIFT			24
+#define EMIF_REG_NVM_T_WTR_MASK			(0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHIFT			20
+#define EMIF_REG_NVM_T_RP_MASK			(0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHIFT			16
+#define EMIF_REG_NVM_T_WRA_MASK			(0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHIFT			8
+#define EMIF_REG_NVM_T_RRD_MASK			(0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHIFT			0
+#define EMIF_REG_NVM_T_RCDMIN_MASK			(0xff << 0)
+
+/* LPDDR2_NVM_TIM_SHDW */
+#define EMIF_REG_NVM_T_XP_SHDW_SHIFT		28
+#define EMIF_REG_NVM_T_XP_SHDW_MASK			(0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHDW_SHIFT		24
+#define EMIF_REG_NVM_T_WTR_SHDW_MASK		(0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHDW_SHIFT		20
+#define EMIF_REG_NVM_T_RP_SHDW_MASK			(0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHDW_SHIFT		16
+#define EMIF_REG_NVM_T_WRA_SHDW_MASK		(0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHDW_SHIFT		8
+#define EMIF_REG_NVM_T_RRD_SHDW_MASK		(0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_SHIFT		0
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_MASK		(0xff << 0)
+
+/* PWR_MGMT_CTRL */
+#define EMIF_REG_IDLEMODE_SHIFT			30
+#define EMIF_REG_IDLEMODE_MASK			(0x3 << 30)
+#define EMIF_REG_PD_TIM_SHIFT			12
+#define EMIF_REG_PD_TIM_MASK			(0xf << 12)
+#define EMIF_REG_DPD_EN_SHIFT			11
+#define EMIF_REG_DPD_EN_MASK			(1 << 11)
+#define EMIF_REG_LP_MODE_SHIFT			8
+#define EMIF_REG_LP_MODE_MASK			(0x7 << 8)
+#define EMIF_REG_SR_TIM_SHIFT			4
+#define EMIF_REG_SR_TIM_MASK			(0xf << 4)
+#define EMIF_REG_CS_TIM_SHIFT			0
+#define EMIF_REG_CS_TIM_MASK			(0xf << 0)
+
+/* PWR_MGMT_CTRL_SHDW */
+#define EMIF_REG_PD_TIM_SHDW_SHIFT			12
+#define EMIF_REG_PD_TIM_SHDW_MASK			(0xf << 12)
+#define EMIF_REG_SR_TIM_SHDW_SHIFT			4
+#define EMIF_REG_SR_TIM_SHDW_MASK			(0xf << 4)
+#define EMIF_REG_CS_TIM_SHDW_SHIFT			0
+#define EMIF_REG_CS_TIM_SHDW_MASK			(0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define EMIF_REG_VALUE_0_SHIFT			0
+#define EMIF_REG_VALUE_0_MASK			(0x7f << 0)
+
+/* LPDDR2_MODE_REG_CFG */
+#define EMIF_REG_CS_SHIFT				31
+#define EMIF_REG_CS_MASK				(1 << 31)
+#define EMIF_REG_REFRESH_EN_SHIFT			30
+#define EMIF_REG_REFRESH_EN_MASK			(1 << 30)
+#define EMIF_REG_ADDRESS_SHIFT			0
+#define EMIF_REG_ADDRESS_MASK			(0xff << 0)
+
+/* OCP_CONFIG */
+#define EMIF_REG_SYS_THRESH_MAX_SHIFT		24
+#define EMIF_REG_SYS_THRESH_MAX_MASK		(0xf << 24)
+#define EMIF_REG_MPU_THRESH_MAX_SHIFT		20
+#define EMIF_REG_MPU_THRESH_MAX_MASK		(0xf << 20)
+#define EMIF_REG_LL_THRESH_MAX_SHIFT		16
+#define EMIF_REG_LL_THRESH_MAX_MASK			(0xf << 16)
+#define EMIF_REG_PR_OLD_COUNT_SHIFT			0
+#define EMIF_REG_PR_OLD_COUNT_MASK			(0xff << 0)
+
+/* OCP_CFG_VAL_1 */
+#define EMIF_REG_SYS_BUS_WIDTH_SHIFT		30
+#define EMIF_REG_SYS_BUS_WIDTH_MASK			(0x3 << 30)
+#define EMIF_REG_LL_BUS_WIDTH_SHIFT			28
+#define EMIF_REG_LL_BUS_WIDTH_MASK			(0x3 << 28)
+#define EMIF_REG_WR_FIFO_DEPTH_SHIFT		8
+#define EMIF_REG_WR_FIFO_DEPTH_MASK			(0xff << 8)
+#define EMIF_REG_CMD_FIFO_DEPTH_SHIFT		0
+#define EMIF_REG_CMD_FIFO_DEPTH_MASK		(0xff << 0)
+
+/* OCP_CFG_VAL_2 */
+#define EMIF_REG_RREG_FIFO_DEPTH_SHIFT		16
+#define EMIF_REG_RREG_FIFO_DEPTH_MASK		(0xff << 16)
+#define EMIF_REG_RSD_FIFO_DEPTH_SHIFT		8
+#define EMIF_REG_RSD_FIFO_DEPTH_MASK		(0xff << 8)
+#define EMIF_REG_RCMD_FIFO_DEPTH_SHIFT		0
+#define EMIF_REG_RCMD_FIFO_DEPTH_MASK		(0xff << 0)
+
+/* IODFT_TLGC */
+#define EMIF_REG_TLEC_SHIFT				16
+#define EMIF_REG_TLEC_MASK				(0xffff << 16)
+#define EMIF_REG_MT_SHIFT				14
+#define EMIF_REG_MT_MASK				(1 << 14)
+#define EMIF_REG_ACT_CAP_EN_SHIFT			13
+#define EMIF_REG_ACT_CAP_EN_MASK			(1 << 13)
+#define EMIF_REG_OPG_LD_SHIFT			12
+#define EMIF_REG_OPG_LD_MASK			(1 << 12)
+#define EMIF_REG_RESET_PHY_SHIFT			10
+#define EMIF_REG_RESET_PHY_MASK			(1 << 10)
+#define EMIF_REG_MMS_SHIFT				8
+#define EMIF_REG_MMS_MASK				(1 << 8)
+#define EMIF_REG_MC_SHIFT				4
+#define EMIF_REG_MC_MASK				(0x3 << 4)
+#define EMIF_REG_PC_SHIFT				1
+#define EMIF_REG_PC_MASK				(0x7 << 1)
+#define EMIF_REG_TM_SHIFT				0
+#define EMIF_REG_TM_MASK				(1 << 0)
+
+/* IODFT_CTRL_MISR_RSLT */
+#define EMIF_REG_DQM_TLMR_SHIFT			16
+#define EMIF_REG_DQM_TLMR_MASK			(0x3ff << 16)
+#define EMIF_REG_CTL_TLMR_SHIFT			0
+#define EMIF_REG_CTL_TLMR_MASK			(0x7ff << 0)
+
+/* IODFT_ADDR_MISR_RSLT */
+#define EMIF_REG_ADDR_TLMR_SHIFT			0
+#define EMIF_REG_ADDR_TLMR_MASK			(0x1fffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_1 */
+#define EMIF_REG_DATA_TLMR_31_0_SHIFT		0
+#define EMIF_REG_DATA_TLMR_31_0_MASK		(0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_2 */
+#define EMIF_REG_DATA_TLMR_63_32_SHIFT		0
+#define EMIF_REG_DATA_TLMR_63_32_MASK		(0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_3 */
+#define EMIF_REG_DATA_TLMR_66_64_SHIFT		0
+#define EMIF_REG_DATA_TLMR_66_64_MASK		(0x7 << 0)
+
+/* PERF_CNT_1 */
+#define EMIF_REG_COUNTER1_SHIFT			0
+#define EMIF_REG_COUNTER1_MASK			(0xffffffff << 0)
+
+/* PERF_CNT_2 */
+#define EMIF_REG_COUNTER2_SHIFT			0
+#define EMIF_REG_COUNTER2_MASK			(0xffffffff << 0)
+
+/* PERF_CNT_CFG */
+#define EMIF_REG_CNTR2_MCONNID_EN_SHIFT		31
+#define EMIF_REG_CNTR2_MCONNID_EN_MASK		(1 << 31)
+#define EMIF_REG_CNTR2_REGION_EN_SHIFT		30
+#define EMIF_REG_CNTR2_REGION_EN_MASK		(1 << 30)
+#define EMIF_REG_CNTR2_CFG_SHIFT			16
+#define EMIF_REG_CNTR2_CFG_MASK			(0xf << 16)
+#define EMIF_REG_CNTR1_MCONNID_EN_SHIFT		15
+#define EMIF_REG_CNTR1_MCONNID_EN_MASK		(1 << 15)
+#define EMIF_REG_CNTR1_REGION_EN_SHIFT		14
+#define EMIF_REG_CNTR1_REGION_EN_MASK		(1 << 14)
+#define EMIF_REG_CNTR1_CFG_SHIFT			0
+#define EMIF_REG_CNTR1_CFG_MASK			(0xf << 0)
+
+/* PERF_CNT_SEL */
+#define EMIF_REG_MCONNID2_SHIFT			24
+#define EMIF_REG_MCONNID2_MASK			(0xff << 24)
+#define EMIF_REG_REGION_SEL2_SHIFT			16
+#define EMIF_REG_REGION_SEL2_MASK			(0x3 << 16)
+#define EMIF_REG_MCONNID1_SHIFT			8
+#define EMIF_REG_MCONNID1_MASK			(0xff << 8)
+#define EMIF_REG_REGION_SEL1_SHIFT			0
+#define EMIF_REG_REGION_SEL1_MASK			(0x3 << 0)
+
+/* PERF_CNT_TIM */
+#define EMIF_REG_TOTAL_TIME_SHIFT			0
+#define EMIF_REG_TOTAL_TIME_MASK			(0xffffffff << 0)
+
+/* READ_IDLE_CTRL */
+#define EMIF_REG_READ_IDLE_LEN_SHIFT		16
+#define EMIF_REG_READ_IDLE_LEN_MASK			(0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHIFT		0
+#define EMIF_REG_READ_IDLE_INTERVAL_MASK		(0x1ff << 0)
+
+/* READ_IDLE_CTRL_SHDW */
+#define EMIF_REG_READ_IDLE_LEN_SHDW_SHIFT		16
+#define EMIF_REG_READ_IDLE_LEN_SHDW_MASK		(0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_SHIFT	0
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_MASK	(0x1ff << 0)
+
+/* IRQ_EOI */
+#define EMIF_REG_EOI_SHIFT				0
+#define EMIF_REG_EOI_MASK				(1 << 0)
+
+/* IRQSTATUS_RAW_SYS */
+#define EMIF_REG_DNV_SYS_SHIFT			2
+#define EMIF_REG_DNV_SYS_MASK			(1 << 2)
+#define EMIF_REG_TA_SYS_SHIFT			1
+#define EMIF_REG_TA_SYS_MASK			(1 << 1)
+#define EMIF_REG_ERR_SYS_SHIFT			0
+#define EMIF_REG_ERR_SYS_MASK			(1 << 0)
+
+/* IRQSTATUS_RAW_LL */
+#define EMIF_REG_DNV_LL_SHIFT			2
+#define EMIF_REG_DNV_LL_MASK			(1 << 2)
+#define EMIF_REG_TA_LL_SHIFT			1
+#define EMIF_REG_TA_LL_MASK				(1 << 1)
+#define EMIF_REG_ERR_LL_SHIFT			0
+#define EMIF_REG_ERR_LL_MASK			(1 << 0)
+
+/* IRQSTATUS_SYS */
+
+/* IRQSTATUS_LL */
+
+/* IRQENABLE_SET_SYS */
+#define EMIF_REG_EN_DNV_SYS_SHIFT			2
+#define EMIF_REG_EN_DNV_SYS_MASK			(1 << 2)
+#define EMIF_REG_EN_TA_SYS_SHIFT			1
+#define EMIF_REG_EN_TA_SYS_MASK			(1 << 1)
+#define EMIF_REG_EN_ERR_SYS_SHIFT			0
+#define EMIF_REG_EN_ERR_SYS_MASK			(1 << 0)
+
+/* IRQENABLE_SET_LL */
+#define EMIF_REG_EN_DNV_LL_SHIFT			2
+#define EMIF_REG_EN_DNV_LL_MASK			(1 << 2)
+#define EMIF_REG_EN_TA_LL_SHIFT			1
+#define EMIF_REG_EN_TA_LL_MASK			(1 << 1)
+#define EMIF_REG_EN_ERR_LL_SHIFT			0
+#define EMIF_REG_EN_ERR_LL_MASK			(1 << 0)
+
+/* IRQENABLE_CLR_SYS */
+
+/* IRQENABLE_CLR_LL */
+
+/* ZQ_CONFIG */
+#define EMIF_REG_ZQ_CS1EN_SHIFT			31
+#define EMIF_REG_ZQ_CS1EN_MASK			(1 << 31)
+#define EMIF_REG_ZQ_CS0EN_SHIFT			30
+#define EMIF_REG_ZQ_CS0EN_MASK			(1 << 30)
+#define EMIF_REG_ZQ_DUALCALEN_SHIFT			29
+#define EMIF_REG_ZQ_DUALCALEN_MASK			(1 << 29)
+#define EMIF_REG_ZQ_SFEXITEN_SHIFT			28
+#define EMIF_REG_ZQ_SFEXITEN_MASK			(1 << 28)
+#define EMIF_REG_ZQ_ZQINIT_MULT_SHIFT		18
+#define EMIF_REG_ZQ_ZQINIT_MULT_MASK		(0x3 << 18)
+#define EMIF_REG_ZQ_ZQCL_MULT_SHIFT			16
+#define EMIF_REG_ZQ_ZQCL_MULT_MASK			(0x3 << 16)
+#define EMIF_REG_ZQ_REFINTERVAL_SHIFT		0
+#define EMIF_REG_ZQ_REFINTERVAL_MASK		(0xffff << 0)
+
+/* TEMP_ALERT_CONFIG */
+#define EMIF_REG_TA_CS1EN_SHIFT			31
+#define EMIF_REG_TA_CS1EN_MASK			(1 << 31)
+#define EMIF_REG_TA_CS0EN_SHIFT			30
+#define EMIF_REG_TA_CS0EN_MASK			(1 << 30)
+#define EMIF_REG_TA_SFEXITEN_SHIFT			28
+#define EMIF_REG_TA_SFEXITEN_MASK			(1 << 28)
+#define EMIF_REG_TA_DEVWDT_SHIFT			26
+#define EMIF_REG_TA_DEVWDT_MASK			(0x3 << 26)
+#define EMIF_REG_TA_DEVCNT_SHIFT			24
+#define EMIF_REG_TA_DEVCNT_MASK			(0x3 << 24)
+#define EMIF_REG_TA_REFINTERVAL_SHIFT		0
+#define EMIF_REG_TA_REFINTERVAL_MASK		(0x3fffff << 0)
+
+/* OCP_ERR_LOG */
+#define EMIF_REG_MADDRSPACE_SHIFT			14
+#define EMIF_REG_MADDRSPACE_MASK			(0x3 << 14)
+#define EMIF_REG_MBURSTSEQ_SHIFT			11
+#define EMIF_REG_MBURSTSEQ_MASK			(0x7 << 11)
+#define EMIF_REG_MCMD_SHIFT				8
+#define EMIF_REG_MCMD_MASK				(0x7 << 8)
+#define EMIF_REG_MCONNID_SHIFT			0
+#define EMIF_REG_MCONNID_MASK			(0xff << 0)
+
+/* DDR_PHY_CTRL_1 */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHIFT		4
+#define EMIF_REG_DDR_PHY_CTRL_1_MASK		(0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHIFT			0
+#define EMIF_REG_READ_LATENCY_MASK			(0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT		4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_MASK		(0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT	12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK	(0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_SHIFT		4
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_MASK		(0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHDW_SHIFT		0
+#define EMIF_REG_READ_LATENCY_SHDW_MASK		(0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT	4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK	(0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK	(0xFFFFF << 12)
+#define EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_SHIFT		25
+#define EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_MASK		(1 << 25)
+#define EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_SHIFT	26
+#define EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_MASK		(1 << 26)
+#define EMIF_DDR_PHY_CTRL_1_RDLVL_MASK_SHIFT		27
+#define EMIF_DDR_PHY_CTRL_1_RDLVL_MASK_MASK		(1 << 27)
+
+/* DDR_PHY_CTRL_2 */
+#define EMIF_REG_DDR_PHY_CTRL_2_SHIFT		0
+#define EMIF_REG_DDR_PHY_CTRL_2_MASK		(0xffffffff << 0)
+
+/*EMIF_READ_WRITE_LEVELING_CONTROL*/
+#define EMIF_REG_RDWRLVLFULL_START_SHIFT	31
+#define EMIF_REG_RDWRLVLFULL_START_MASK		(1 << 31)
+#define EMIF_REG_RDWRLVLINC_PRE_SHIFT		24
+#define EMIF_REG_RDWRLVLINC_PRE_MASK		(0x7F << 24)
+#define EMIF_REG_RDLVLINC_INT_SHIFT		16
+#define EMIF_REG_RDLVLINC_INT_MASK		(0xFF << 16)
+#define EMIF_REG_RDLVLGATEINC_INT_SHIFT		8
+#define EMIF_REG_RDLVLGATEINC_INT_MASK		(0xFF << 8)
+#define EMIF_REG_WRLVLINC_INT_SHIFT		0
+#define EMIF_REG_WRLVLINC_INT_MASK		(0xFF << 0)
+
+/*EMIF_READ_WRITE_LEVELING_RAMP_CONTROL*/
+#define EMIF_REG_RDWRLVL_EN_SHIFT		31
+#define EMIF_REG_RDWRLVL_EN_MASK		(1 << 31)
+#define EMIF_REG_RDWRLVLINC_RMP_PRE_SHIFT	24
+#define EMIF_REG_RDWRLVLINC_RMP_PRE_MASK	(0x7F << 24)
+#define EMIF_REG_RDLVLINC_RMP_INT_SHIFT		16
+#define EMIF_REG_RDLVLINC_RMP_INT_MASK		(0xFF << 16)
+#define EMIF_REG_RDLVLGATEINC_RMP_INT_SHIFT	8
+#define EMIF_REG_RDLVLGATEINC_RMP_INT_MASK	(0xFF << 8)
+#define EMIF_REG_WRLVLINC_RMP_INT_SHIFT		0
+#define EMIF_REG_WRLVLINC_RMP_INT_MASK		(0xFF << 0)
+
+/*EMIF_READ_WRITE_LEVELING_RAMP_WINDOW*/
+#define EMIF_REG_RDWRLVLINC_RMP_WIN_SHIFT	0
+#define EMIF_REG_RDWRLVLINC_RMP_WIN_MASK	(0x1FFF << 0)
+
+/* EMIF_PHY_CTRL_36 */
+#define EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR	(1 << 8)
+
+#define PHY_RDDQS_RATIO_REGS		5
+#define PHY_FIFO_WE_SLAVE_RATIO_REGS	5
+#define PHY_REG_WR_DQ_SLAVE_RATIO_REGS	10
+
+/*Leveling Fields */
+#define DDR3_WR_LVL_INT		0x73
+#define DDR3_RD_LVL_INT		0x33
+#define DDR3_RD_LVL_GATE_INT	0x59
+#define RD_RW_LVL_INC_PRE	0x0
+#define DDR3_FULL_LVL		(1 << EMIF_REG_RDWRLVL_EN_SHIFT)
+
+#define DDR3_INC_LVL	((DDR3_WR_LVL_INT << EMIF_REG_WRLVLINC_INT_SHIFT)   \
+		| (DDR3_RD_LVL_GATE_INT << EMIF_REG_RDLVLGATEINC_INT_SHIFT) \
+		| (DDR3_RD_LVL_INT << EMIF_REG_RDLVLINC_RMP_INT_SHIFT)      \
+		| (RD_RW_LVL_INC_PRE << EMIF_REG_RDWRLVLINC_RMP_PRE_SHIFT))
+
+#define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES	0x0000C1A7
+#define SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES	0x000001A7
+#define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES_ES2 0x0000C1C7
+
+/* DMM */
+#define DMM_BASE			0x4E000040
+
+/* Memory Adapter */
+#define MA_BASE				0x482AF040
+#define MA_PRIORITY			0x482A2000
+#define MA_HIMEM_INTERLEAVE_UN_SHIFT	8
+#define MA_HIMEM_INTERLEAVE_UN_MASK	(1 << 8)
+
+/* DMM_LISA_MAP */
+#define EMIF_SYS_ADDR_SHIFT		24
+#define EMIF_SYS_ADDR_MASK		(0xff << 24)
+#define EMIF_SYS_SIZE_SHIFT		20
+#define EMIF_SYS_SIZE_MASK		(0x7 << 20)
+#define EMIF_SDRC_INTL_SHIFT	18
+#define EMIF_SDRC_INTL_MASK		(0x3 << 18)
+#define EMIF_SDRC_ADDRSPC_SHIFT	16
+#define EMIF_SDRC_ADDRSPC_MASK	(0x3 << 16)
+#define EMIF_SDRC_MAP_SHIFT		8
+#define EMIF_SDRC_MAP_MASK		(0x3 << 8)
+#define EMIF_SDRC_ADDR_SHIFT	0
+#define EMIF_SDRC_ADDR_MASK		(0xff << 0)
+
+/* DMM_LISA_MAP fields */
+#define DMM_SDRC_MAP_UNMAPPED		0
+#define DMM_SDRC_MAP_EMIF1_ONLY		1
+#define DMM_SDRC_MAP_EMIF2_ONLY		2
+#define DMM_SDRC_MAP_EMIF1_AND_EMIF2	3
+
+#define DMM_SDRC_INTL_NONE		0
+#define DMM_SDRC_INTL_128B		1
+#define DMM_SDRC_INTL_256B		2
+#define DMM_SDRC_INTL_512		3
+
+#define DMM_SDRC_ADDR_SPC_SDRAM		0
+#define DMM_SDRC_ADDR_SPC_NVM		1
+#define DMM_SDRC_ADDR_SPC_INVALID	2
+
+#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL		(\
+	(DMM_SDRC_MAP_EMIF1_AND_EMIF2 << EMIF_SDRC_MAP_SHIFT) |\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT) |\
+	(DMM_SDRC_INTL_128B << EMIF_SDRC_INTL_SHIFT) |\
+	(CONFIG_SYS_SDRAM_BASE << EMIF_SYS_ADDR_SHIFT))
+
+#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL	(\
+	(DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL	(\
+	(DMM_SDRC_MAP_EMIF2_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+/* Trap for invalid TILER PAT entries */
+#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP		(\
+	(0  << EMIF_SDRC_ADDR_SHIFT) |\
+	(DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_INVALID << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT)|\
+	(0xFF << EMIF_SYS_ADDR_SHIFT))
+
+#define EMIF_EXT_PHY_CTRL_TIMING_REG	0x5
+
+/* EMIF ECC CTRL reg */
+#define EMIF_ECC_CTRL_REG_ECC_EN_SHIFT			31
+#define EMIF_ECC_CTRL_REG_ECC_EN_MASK			(1 << 31)
+#define EMIF_ECC_CTRL_REG_ECC_ADDR_RGN_PROT_SHIFT	30
+#define EMIF_ECC_CTRL_REG_ECC_ADDR_RGN_PROT_MASK	(1 << 30)
+#define EMIF_ECC_CTRL_REG_ECC_VERIFY_DIS_SHIFT		29
+#define EMIF_ECC_CTRL_REG_ECC_VERIFY_DIS_MASK		(1 << 29)
+#define EMIF_ECC_REG_RMW_EN_SHIFT			28
+#define EMIF_ECC_REG_RMW_EN_MASK			(1 << 28)
+#define EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_SHIFT		1
+#define EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK		(1 << 1)
+#define EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_SHIFT		0
+#define EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK		(1 << 0)
+
+/* EMIF ECC ADDRESS RANGE */
+#define EMIF_ECC_REG_ECC_END_ADDR_SHIFT			16
+#define EMIF_ECC_REG_ECC_END_ADDR_MASK			(0xffff << 16)
+#define EMIF_ECC_REG_ECC_START_ADDR_SHIFT		0
+#define EMIF_ECC_REG_ECC_START_ADDR_MASK		(0xffff << 0)
+
+/* EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS */
+#define EMIF_INT_ONEBIT_ECC_ERR_SYS_SHIFT		5
+#define EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK		(1 << 5)
+#define EMIF_INT_TWOBIT_ECC_ERR_SYS_SHIFT		4
+#define EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK		(1 << 4)
+#define EMIF_INT_WR_ECC_ERR_SYS_SHIFT			3
+#define EMIF_INT_WR_ECC_ERR_SYS_MASK			(1 << 3)
+
+/* Reg mapping structure */
+struct emif_reg_struct {
+	u32 emif_mod_id_rev;
+	u32 emif_status;
+	u32 emif_sdram_config;
+	u32 emif_lpddr2_nvm_config;
+	u32 emif_sdram_ref_ctrl;
+	u32 emif_sdram_ref_ctrl_shdw;
+	u32 emif_sdram_tim_1;
+	u32 emif_sdram_tim_1_shdw;
+	u32 emif_sdram_tim_2;
+	u32 emif_sdram_tim_2_shdw;
+	u32 emif_sdram_tim_3;
+	u32 emif_sdram_tim_3_shdw;
+	u32 emif_lpddr2_nvm_tim;
+	u32 emif_lpddr2_nvm_tim_shdw;
+	u32 emif_pwr_mgmt_ctrl;
+	u32 emif_pwr_mgmt_ctrl_shdw;
+	u32 emif_lpddr2_mode_reg_data;
+	u32 padding1[1];
+	u32 emif_lpddr2_mode_reg_data_es2;
+	u32 padding11[1];
+	u32 emif_lpddr2_mode_reg_cfg;
+	u32 emif_l3_config;
+	u32 emif_l3_cfg_val_1;
+	u32 emif_l3_cfg_val_2;
+	u32 emif_iodft_tlgc;
+	u32 padding2[7];
+	u32 emif_perf_cnt_1;
+	u32 emif_perf_cnt_2;
+	u32 emif_perf_cnt_cfg;
+	u32 emif_perf_cnt_sel;
+	u32 emif_perf_cnt_tim;
+	u32 padding3;
+	u32 emif_read_idlectrl;
+	u32 emif_read_idlectrl_shdw;
+	u32 padding4;
+	u32 emif_irqstatus_raw_sys;
+	u32 emif_irqstatus_raw_ll;
+	u32 emif_irqstatus_sys;
+	u32 emif_irqstatus_ll;
+	u32 emif_irqenable_set_sys;
+	u32 emif_irqenable_set_ll;
+	u32 emif_irqenable_clr_sys;
+	u32 emif_irqenable_clr_ll;
+	u32 padding5;
+	u32 emif_zq_config;
+	u32 emif_temp_alert_config;
+	u32 emif_l3_err_log;
+	u32 emif_rd_wr_lvl_rmp_win;
+	u32 emif_rd_wr_lvl_rmp_ctl;
+	u32 emif_rd_wr_lvl_ctl;
+	u32 padding6[1];
+	u32 emif_ddr_phy_ctrl_1;
+	u32 emif_ddr_phy_ctrl_1_shdw;
+	u32 emif_ddr_phy_ctrl_2;
+	u32 padding7[4];
+	u32 emif_prio_class_serv_map;
+	u32 emif_connect_id_serv_1_map;
+	u32 emif_connect_id_serv_2_map;
+	u32 padding8;
+	u32 emif_ecc_ctrl_reg;
+	u32 emif_ecc_address_range_1;
+	u32 emif_ecc_address_range_2;
+	u32 padding8_1;
+	u32 emif_rd_wr_exec_thresh;
+	u32 emif_cos_config;
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_ARCH_KEYSTONE)
+	u32 padding9[2];
+	u32 emif_1b_ecc_err_cnt;
+	u32 emif_1b_ecc_err_thrush;
+	u32 emif_1b_ecc_err_dist_1;
+	u32 emif_1b_ecc_err_addr_log;
+	u32 emif_2b_ecc_err_addr_log;
+	u32 emif_ddr_phy_status[28];
+	u32 padding10[19];
+#else
+	u32 padding9[6];
+	u32 emif_ddr_phy_status[28];
+	u32 padding10[20];
+#endif
+	u32 emif_ddr_ext_phy_ctrl_1;
+	u32 emif_ddr_ext_phy_ctrl_1_shdw;
+	u32 emif_ddr_ext_phy_ctrl_2;
+	u32 emif_ddr_ext_phy_ctrl_2_shdw;
+	u32 emif_ddr_ext_phy_ctrl_3;
+	u32 emif_ddr_ext_phy_ctrl_3_shdw;
+	u32 emif_ddr_ext_phy_ctrl_4;
+	u32 emif_ddr_ext_phy_ctrl_4_shdw;
+	u32 emif_ddr_ext_phy_ctrl_5;
+	u32 emif_ddr_ext_phy_ctrl_5_shdw;
+	u32 emif_ddr_ext_phy_ctrl_6;
+	u32 emif_ddr_ext_phy_ctrl_6_shdw;
+	u32 emif_ddr_ext_phy_ctrl_7;
+	u32 emif_ddr_ext_phy_ctrl_7_shdw;
+	u32 emif_ddr_ext_phy_ctrl_8;
+	u32 emif_ddr_ext_phy_ctrl_8_shdw;
+	u32 emif_ddr_ext_phy_ctrl_9;
+	u32 emif_ddr_ext_phy_ctrl_9_shdw;
+	u32 emif_ddr_ext_phy_ctrl_10;
+	u32 emif_ddr_ext_phy_ctrl_10_shdw;
+	u32 emif_ddr_ext_phy_ctrl_11;
+	u32 emif_ddr_ext_phy_ctrl_11_shdw;
+	u32 emif_ddr_ext_phy_ctrl_12;
+	u32 emif_ddr_ext_phy_ctrl_12_shdw;
+	u32 emif_ddr_ext_phy_ctrl_13;
+	u32 emif_ddr_ext_phy_ctrl_13_shdw;
+	u32 emif_ddr_ext_phy_ctrl_14;
+	u32 emif_ddr_ext_phy_ctrl_14_shdw;
+	u32 emif_ddr_ext_phy_ctrl_15;
+	u32 emif_ddr_ext_phy_ctrl_15_shdw;
+	u32 emif_ddr_ext_phy_ctrl_16;
+	u32 emif_ddr_ext_phy_ctrl_16_shdw;
+	u32 emif_ddr_ext_phy_ctrl_17;
+	u32 emif_ddr_ext_phy_ctrl_17_shdw;
+	u32 emif_ddr_ext_phy_ctrl_18;
+	u32 emif_ddr_ext_phy_ctrl_18_shdw;
+	u32 emif_ddr_ext_phy_ctrl_19;
+	u32 emif_ddr_ext_phy_ctrl_19_shdw;
+	u32 emif_ddr_ext_phy_ctrl_20;
+	u32 emif_ddr_ext_phy_ctrl_20_shdw;
+	u32 emif_ddr_ext_phy_ctrl_21;
+	u32 emif_ddr_ext_phy_ctrl_21_shdw;
+	u32 emif_ddr_ext_phy_ctrl_22;
+	u32 emif_ddr_ext_phy_ctrl_22_shdw;
+	u32 emif_ddr_ext_phy_ctrl_23;
+	u32 emif_ddr_ext_phy_ctrl_23_shdw;
+	u32 emif_ddr_ext_phy_ctrl_24;
+	u32 emif_ddr_ext_phy_ctrl_24_shdw;
+	u32 emif_ddr_ext_phy_ctrl_25;
+	u32 emif_ddr_ext_phy_ctrl_25_shdw;
+	u32 emif_ddr_ext_phy_ctrl_26;
+	u32 emif_ddr_ext_phy_ctrl_26_shdw;
+	u32 emif_ddr_ext_phy_ctrl_27;
+	u32 emif_ddr_ext_phy_ctrl_27_shdw;
+	u32 emif_ddr_ext_phy_ctrl_28;
+	u32 emif_ddr_ext_phy_ctrl_28_shdw;
+	u32 emif_ddr_ext_phy_ctrl_29;
+	u32 emif_ddr_ext_phy_ctrl_29_shdw;
+	u32 emif_ddr_ext_phy_ctrl_30;
+	u32 emif_ddr_ext_phy_ctrl_30_shdw;
+	u32 emif_ddr_ext_phy_ctrl_31;
+	u32 emif_ddr_ext_phy_ctrl_31_shdw;
+	u32 emif_ddr_ext_phy_ctrl_32;
+	u32 emif_ddr_ext_phy_ctrl_32_shdw;
+	u32 emif_ddr_ext_phy_ctrl_33;
+	u32 emif_ddr_ext_phy_ctrl_33_shdw;
+	u32 emif_ddr_ext_phy_ctrl_34;
+	u32 emif_ddr_ext_phy_ctrl_34_shdw;
+	u32 emif_ddr_ext_phy_ctrl_35;
+	u32 emif_ddr_ext_phy_ctrl_35_shdw;
+	union {
+		u32 emif_ddr_ext_phy_ctrl_36;
+		u32 emif_ddr_fifo_misaligned_clear_1;
+	};
+	union {
+		u32 emif_ddr_ext_phy_ctrl_36_shdw;
+		u32 emif_ddr_fifo_misaligned_clear_2;
+	};
+};
+
+struct dmm_lisa_map_regs {
+	u32 dmm_lisa_map_0;
+	u32 dmm_lisa_map_1;
+	u32 dmm_lisa_map_2;
+	u32 dmm_lisa_map_3;
+	u8 is_ma_present;
+};
+
+#define CS0	0
+#define CS1	1
+/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
+#define MAX_LPDDR2_FREQ	400000000	/* 400 MHz */
+
+/*
+ * The period of DDR clk is represented as numerator and denominator for
+ * better accuracy in integer based calculations. However, if the numerator
+ * and denominator are very huge there may be chances of overflow in
+ * calculations. So, as a trade-off keep denominator(and consequently
+ * numerator) within a limit sacrificing some accuracy - but not much
+ * If denominator and numerator are already small (such as at 400 MHz)
+ * no adjustment is needed
+ */
+#define EMIF_PERIOD_DEN_LIMIT	1000
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES	6
+/*
+ * Indices into the Addressing Table array.
+ * One entry each for all the different types of devices with different
+ * addressing schemes
+ */
+#define ADDR_TABLE_INDEX64M	0
+#define ADDR_TABLE_INDEX128M	1
+#define ADDR_TABLE_INDEX256M	2
+#define ADDR_TABLE_INDEX512M	3
+#define ADDR_TABLE_INDEX1GS4	4
+#define ADDR_TABLE_INDEX2GS4	5
+#define ADDR_TABLE_INDEX4G	6
+#define ADDR_TABLE_INDEX8G	7
+#define ADDR_TABLE_INDEX1GS2	8
+#define ADDR_TABLE_INDEX2GS2	9
+#define ADDR_TABLE_INDEXMAX	10
+
+/* Number of Row bits */
+#define ROW_9  0
+#define ROW_10 1
+#define ROW_11 2
+#define ROW_12 3
+#define ROW_13 4
+#define ROW_14 5
+#define ROW_15 6
+#define ROW_16 7
+
+/* Number of Column bits */
+#define COL_8   0
+#define COL_9   1
+#define COL_10  2
+#define COL_11  3
+#define COL_7   4 /*Not supported by OMAP included for completeness */
+
+/* Number of Banks*/
+#define BANKS1 0
+#define BANKS2 1
+#define BANKS4 2
+#define BANKS8 3
+
+/* Refresh rate in micro seconds x 10 */
+#define T_REFI_15_6	156
+#define T_REFI_7_8	78
+#define T_REFI_3_9	39
+
+#define EBANK_CS1_DIS	0
+#define EBANK_CS1_EN	1
+
+/* Read Latency used by the device at reset */
+#define RL_BOOT		3
+/* Read Latency for the highest frequency you want to use */
+#ifdef CONFIG_OMAP54XX
+#define RL_FINAL	8
+#else
+#define RL_FINAL	6
+#endif
+
+
+/* Interleaving policies at EMIF level- between banks and Chip Selects */
+#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING	0
+#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING	3
+
+/*
+ * Interleaving policy to be used
+ * Currently set to MAX interleaving for better performance
+ */
+#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
+
+/* State of the core voltage:
+ * This is important for some parameters such as read idle control and
+ * ZQ calibration timings. Timings are much stricter when voltage ramp
+ * is happening compared to when the voltage is stable.
+ * We need to calculate two sets of values for these parameters and use
+ * them accordingly
+ */
+#define LPDDR2_VOLTAGE_STABLE	0
+#define LPDDR2_VOLTAGE_RAMPING	1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_REG_READ_IDLE_LEN_VAL	5
+
+/* Interval between forced 'read idles' */
+/* To be used when voltage is changed for DPS/DVFS - 1us */
+#define READ_IDLE_INTERVAL_DVFS		(1*1000)
+/*
+ * To be used when voltage is not scaled except by Smart Reflex
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL	(50*1000)
+
+
+/*
+ * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
+ * be enough. This shoule be enough also in the case when voltage is changing
+ * due to smart-reflex.
+ */
+#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US	(50*1000)
+/*
+ * If voltage is changing due to DVFS ZQCS should be performed more
+ * often(every 50us)
+ */
+#define EMIF_ZQCS_INTERVAL_DVFS_IN_US	50
+
+/* The interval between ZQCL commands as a multiple of ZQCS interval */
+#define REG_ZQ_ZQCL_MULT		4
+/* The interval between ZQINIT commands as a multiple of ZQCL interval */
+#define REG_ZQ_ZQINIT_MULT		3
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define REG_ZQ_SFEXITEN_ENABLE		1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ * None of the boards that we know of have this capability
+ * So disabled by default
+ */
+#define REG_ZQ_DUALCALEN_DISABLE	0
+/*
+ * Enable ZQ Calibration by default on CS0. If we are asked to program
+ * the EMIF there will be something connected to CS0 for sure
+ */
+#define REG_ZQ_CS0EN_ENABLE		1
+
+/* EMIF_PWR_MGMT_CTRL register */
+/* Low power modes */
+#define LP_MODE_DISABLE		0
+#define LP_MODE_CLOCK_STOP	1
+#define LP_MODE_SELF_REFRESH	2
+#define LP_MODE_PWR_DN		3
+
+/* REG_DPD_EN */
+#define DPD_DISABLE	0
+#define DPD_ENABLE	1
+
+/* Maximum delay before Low Power Modes */
+#define REG_CS_TIM		0x0
+#define REG_SR_TIM		0xF
+#define REG_PD_TIM		0xF
+
+
+/* EMIF_PWR_MGMT_CTRL register */
+#define EMIF_PWR_MGMT_CTRL (\
+	((REG_CS_TIM << EMIF_REG_CS_TIM_SHIFT) & EMIF_REG_CS_TIM_MASK)|\
+	((REG_SR_TIM << EMIF_REG_SR_TIM_SHIFT) & EMIF_REG_SR_TIM_MASK)|\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+	((LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT)\
+			& EMIF_REG_LP_MODE_MASK) |\
+	((DPD_DISABLE << EMIF_REG_DPD_EN_SHIFT)\
+			& EMIF_REG_DPD_EN_MASK))\
+
+#define EMIF_PWR_MGMT_CTRL_SHDW (\
+	((REG_CS_TIM << EMIF_REG_CS_TIM_SHDW_SHIFT)\
+			& EMIF_REG_CS_TIM_SHDW_MASK) |\
+	((REG_SR_TIM << EMIF_REG_SR_TIM_SHDW_SHIFT)\
+			& EMIF_REG_SR_TIM_SHDW_MASK) |\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+			& EMIF_REG_PD_TIM_SHDW_MASK))
+
+/* EMIF_L3_CONFIG register value */
+#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0	0x0A0000FF
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0	0x0A300000
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0	0x0A500000
+
+/*
+ * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
+ * All these fields have magic values dependent on frequency and
+ * determined by PHY and DLL integration with EMIF. Setting the magic
+ * values suggested by hw team.
+ */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL			0x049FF
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ			0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ			0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS	0xFF
+
+/*
+* MR1 value:
+* Burst length	: 8
+* Burst type	: sequential
+* Wrap		: enabled
+* nWR		: 3(default). EMIF does not do pre-charge.
+*		: So nWR is don't care
+*/
+#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3	0x23
+#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8	0xc3
+
+/* MR2 */
+#define MR2_RL3_WL1			1
+#define MR2_RL4_WL2			2
+#define MR2_RL5_WL2			3
+#define MR2_RL6_WL3			4
+
+/* MR10: ZQ calibration codes */
+#define MR10_ZQ_ZQCS		0x56
+#define MR10_ZQ_ZQCL		0xAB
+#define MR10_ZQ_ZQINIT		0xFF
+#define MR10_ZQ_ZQRESET		0xC3
+
+/* TEMP_ALERT_CONFIG */
+#define TEMP_ALERT_POLL_INTERVAL_MS	360 /* for temp gradient - 5 C/s */
+#define TEMP_ALERT_CONFIG_DEVCT_1	0
+#define TEMP_ALERT_CONFIG_DEVWDT_32	2
+
+/* MR16 value: refresh full array(no partial array self refresh) */
+#define MR16_REF_FULL_ARRAY	0
+
+/*
+ * Maximum number of entries we keep in our array of timing tables
+ * We need not keep all the speed bins supported by the device
+ * We need to keep timing tables for only the speed bins that we
+ * are interested in
+ */
+#define MAX_NUM_SPEEDBINS	4
+
+/* LPDDR2 Densities */
+#define LPDDR2_DENSITY_64Mb	0
+#define LPDDR2_DENSITY_128Mb	1
+#define LPDDR2_DENSITY_256Mb	2
+#define LPDDR2_DENSITY_512Mb	3
+#define LPDDR2_DENSITY_1Gb	4
+#define LPDDR2_DENSITY_2Gb	5
+#define LPDDR2_DENSITY_4Gb	6
+#define LPDDR2_DENSITY_8Gb	7
+#define LPDDR2_DENSITY_16Gb	8
+#define LPDDR2_DENSITY_32Gb	9
+
+/* LPDDR2 type */
+#define	LPDDR2_TYPE_S4	0
+#define	LPDDR2_TYPE_S2	1
+#define	LPDDR2_TYPE_NVM	2
+
+/* LPDDR2 IO width */
+#define	LPDDR2_IO_WIDTH_32	0
+#define	LPDDR2_IO_WIDTH_16	1
+#define	LPDDR2_IO_WIDTH_8	2
+
+/* Mode register numbers */
+#define LPDDR2_MR0	0
+#define LPDDR2_MR1	1
+#define LPDDR2_MR2	2
+#define LPDDR2_MR3	3
+#define LPDDR2_MR4	4
+#define LPDDR2_MR5	5
+#define LPDDR2_MR6	6
+#define LPDDR2_MR7	7
+#define LPDDR2_MR8	8
+#define LPDDR2_MR9	9
+#define LPDDR2_MR10	10
+#define LPDDR2_MR11	11
+#define LPDDR2_MR16	16
+#define LPDDR2_MR17	17
+#define LPDDR2_MR18	18
+
+/* MR0 */
+#define LPDDR2_MR0_DAI_SHIFT	0
+#define LPDDR2_MR0_DAI_MASK	1
+#define LPDDR2_MR0_DI_SHIFT	1
+#define LPDDR2_MR0_DI_MASK	(1 << 1)
+#define LPDDR2_MR0_DNVI_SHIFT	2
+#define LPDDR2_MR0_DNVI_MASK	(1 << 2)
+
+/* MR4 */
+#define MR4_SDRAM_REF_RATE_SHIFT	0
+#define MR4_SDRAM_REF_RATE_MASK		7
+#define MR4_TUF_SHIFT			7
+#define MR4_TUF_MASK			(1 << 7)
+
+/* MR4 SDRAM Refresh Rate field values */
+#define SDRAM_TEMP_LESS_LOW_SHUTDOWN			0x0
+#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS		0x1
+#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS		0x2
+#define SDRAM_TEMP_NOMINAL				0x3
+#define SDRAM_TEMP_RESERVED_4				0x4
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH			0x5
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS	0x6
+#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN			0x7
+
+#define LPDDR2_MANUFACTURER_SAMSUNG	1
+#define LPDDR2_MANUFACTURER_QIMONDA	2
+#define LPDDR2_MANUFACTURER_ELPIDA	3
+#define LPDDR2_MANUFACTURER_ETRON	4
+#define LPDDR2_MANUFACTURER_NANYA	5
+#define LPDDR2_MANUFACTURER_HYNIX	6
+#define LPDDR2_MANUFACTURER_MOSEL	7
+#define LPDDR2_MANUFACTURER_WINBOND	8
+#define LPDDR2_MANUFACTURER_ESMT	9
+#define LPDDR2_MANUFACTURER_SPANSION 11
+#define LPDDR2_MANUFACTURER_SST		12
+#define LPDDR2_MANUFACTURER_ZMOS	13
+#define LPDDR2_MANUFACTURER_INTEL	14
+#define LPDDR2_MANUFACTURER_NUMONYX	254
+#define LPDDR2_MANUFACTURER_MICRON	255
+
+/* MR8 register fields */
+#define MR8_TYPE_SHIFT		0x0
+#define MR8_TYPE_MASK		0x3
+#define MR8_DENSITY_SHIFT	0x2
+#define MR8_DENSITY_MASK	(0xF << 0x2)
+#define MR8_IO_WIDTH_SHIFT	0x6
+#define MR8_IO_WIDTH_MASK	(0x3 << 0x6)
+
+/* SDRAM TYPE */
+#define EMIF_SDRAM_TYPE_DDR2	0x2
+#define EMIF_SDRAM_TYPE_DDR3	0x3
+#define EMIF_SDRAM_TYPE_LPDDR2	0x4
+
+struct lpddr2_addressing {
+	u8	num_banks;
+	u8	t_REFI_us_x10;
+	u8	row_sz[2]; /* One entry each for x32 and x16 */
+	u8	col_sz[2]; /* One entry each for x32 and x16 */
+};
+
+/* Structure for timings from the DDR datasheet */
+struct lpddr2_ac_timings {
+	u32 max_freq;
+	u8 RL;
+	u8 tRPab;
+	u8 tRCD;
+	u8 tWR;
+	u8 tRASmin;
+	u8 tRRD;
+	u8 tWTRx2;
+	u8 tXSR;
+	u8 tXPx2;
+	u8 tRFCab;
+	u8 tRTPx2;
+	u8 tCKE;
+	u8 tCKESR;
+	u8 tZQCS;
+	u32 tZQCL;
+	u32 tZQINIT;
+	u8 tDQSCKMAXx2;
+	u8 tRASmax;
+	u8 tFAW;
+
+};
+
+/*
+ * Min tCK values for some of the parameters:
+ * If the calculated clock cycles for the respective parameter is
+ * less than the corresponding min tCK value, we need to set the min
+ * tCK value. This may happen at lower frequencies.
+ */
+struct lpddr2_min_tck {
+	u32 tRL;
+	u32 tRP_AB;
+	u32 tRCD;
+	u32 tWR;
+	u32 tRAS_MIN;
+	u32 tRRD;
+	u32 tWTR;
+	u32 tXP;
+	u32 tRTP;
+	u8  tCKE;
+	u32 tCKESR;
+	u32 tFAW;
+};
+
+struct lpddr2_device_details {
+	u8	type;
+	u8	density;
+	u8	io_width;
+	u8	manufacturer;
+};
+
+struct lpddr2_device_timings {
+	const struct lpddr2_ac_timings **ac_timings;
+	const struct lpddr2_min_tck *min_tck;
+};
+
+/* Details of the devices connected to each chip-select of an EMIF instance */
+struct emif_device_details {
+	const struct lpddr2_device_details *cs0_device_details;
+	const struct lpddr2_device_details *cs1_device_details;
+	const struct lpddr2_device_timings *cs0_device_timings;
+	const struct lpddr2_device_timings *cs1_device_timings;
+};
+
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialization and DVFS
+ */
+struct emif_regs {
+	u32 freq;
+	u32 sdram_config_init;
+	u32 sdram_config;
+	u32 sdram_config2;
+	u32 ref_ctrl;
+	u32 ref_ctrl_final;
+	u32 sdram_tim1;
+	u32 sdram_tim2;
+	u32 sdram_tim3;
+	u32 ocp_config;
+	u32 read_idle_ctrl;
+	u32 zq_config;
+	u32 temp_alert_config;
+	u32 emif_ddr_phy_ctlr_1_init;
+	u32 emif_ddr_phy_ctlr_1;
+	u32 emif_ddr_ext_phy_ctrl_1;
+	u32 emif_ddr_ext_phy_ctrl_2;
+	u32 emif_ddr_ext_phy_ctrl_3;
+	u32 emif_ddr_ext_phy_ctrl_4;
+	u32 emif_ddr_ext_phy_ctrl_5;
+	u32 emif_rd_wr_lvl_rmp_win;
+	u32 emif_rd_wr_lvl_rmp_ctl;
+	u32 emif_rd_wr_lvl_ctl;
+	u32 emif_rd_wr_exec_thresh;
+	u32 emif_prio_class_serv_map;
+	u32 emif_connect_id_serv_1_map;
+	u32 emif_connect_id_serv_2_map;
+	u32 emif_cos_config;
+	u32 emif_ecc_ctrl_reg;
+	u32 emif_ecc_address_range_1;
+	u32 emif_ecc_address_range_2;
+};
+
+struct lpddr2_mr_regs {
+	s8 mr1;
+	s8 mr2;
+	s8 mr3;
+	s8 mr10;
+	s8 mr16;
+};
+
+struct read_write_regs {
+	u32 read_reg;
+	u32 write_reg;
+};
+
+static inline u32 get_emif_rev(u32 base)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	return (readl(&emif->emif_mod_id_rev) & EMIF_REG_MAJOR_REVISION_MASK)
+		>> EMIF_REG_MAJOR_REVISION_SHIFT;
+}
+
+/*
+ * Get SDRAM type connected to EMIF.
+ * Assuming similar SDRAM parts are connected to both EMIF's
+ * which is typically the case. So it is sufficient to get
+ * SDRAM type from EMIF1.
+ */
+static inline u32 emif_sdram_type(u32 sdram_config)
+{
+	return (sdram_config & EMIF_REG_SDRAM_TYPE_MASK)
+	       >> EMIF_REG_SDRAM_TYPE_SHIFT;
+}
+
+/* assert macros */
+#if defined(DEBUG)
+#define emif_assert(c)	({ if (!(c)) for (;;); })
+#else
+#define emif_assert(c)	({ if (0) hang(); })
+#endif
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
+#else
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+			struct lpddr2_device_details *lpddr2_dev_details);
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings);
+#endif
+
+void do_ext_phy_settings(u32 base, const struct emif_regs *regs);
+void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs);
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+extern u32 *const T_num;
+extern u32 *const T_den;
+#endif
+
+void config_data_eye_leveling_samples(u32 emif_base);
+const struct read_write_regs *get_bug_regs(u32 *iterations);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/fsl_secure_boot.h b/roms/u-boot/arch/arm/include/asm/fsl_secure_boot.h
new file mode 100644
index 000000000..b0c7599e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/fsl_secure_boot.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef __FSL_SECURE_BOOT_H
+#define __FSL_SECURE_BOOT_H
+
+#ifdef CONFIG_CHAIN_OF_TRUST
+#define CONFIG_FSL_SEC_MON
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Define the key hash for U-Boot here if public/private key pair used to
+ * sign U-boot are different from the SRK hash put in the fuse
+ * Example of defining KEY_HASH is
+ * #define CONFIG_SPL_UBOOT_KEY_HASH \
+ *      "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
+ * else leave it defined as NULL
+ */
+
+#define CONFIG_SPL_UBOOT_KEY_HASH	NULL
+#endif /* ifdef CONFIG_SPL_BUILD */
+
+#define CONFIG_KEY_REVOCATION
+
+#if defined(CONFIG_FSL_LAYERSCAPE)
+/*
+ * For fsl layerscape based platforms, ESBC image Address in Header
+ * is 64 bit.
+ */
+#define CONFIG_ESBC_ADDR_64BIT
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_SYS_RAMBOOT
+/* The key used for verification of next level images
+ * is picked up from an Extension Table which has
+ * been verified by the ISBC (Internal Secure boot Code)
+ * in boot ROM of the SoC.
+ * The feature is only applicable in case of NOR boot and is
+ * not applicable in case of RAMBOOT (NAND, SD, SPI).
+ * For LS, this feature is available for all device if IE Table
+ * is copied to XIP memory
+ * Also, for LS, ISBC doesn't verify this table.
+ */
+#define CONFIG_FSL_ISBC_KEY_EXT
+
+#endif
+
+#ifdef CONFIG_ARCH_LS2080A
+#define CONFIG_EXTRA_ENV \
+	"setenv fdt_high 0xa0000000;"	\
+	"setenv initrd_high 0xcfffffff;"	\
+	"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#else
+#define CONFIG_EXTRA_ENV \
+	"setenv fdt_high 0xffffffff;"	\
+	"setenv initrd_high 0xffffffff;"	\
+	"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#endif
+
+/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
+ * Non-XIP Memory (Nand/SD)*/
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_FSL_LSCH3) || \
+	defined(CONFIG_SD_BOOT) || defined(CONFIG_NAND_BOOT)
+#define CONFIG_BOOTSCRIPT_COPY_RAM
+#endif
+/* The address needs to be modified according to NOR, NAND, SD and
+ * DDR memory map
+ */
+#ifdef CONFIG_FSL_LSCH3
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_BS_ADDR_DEVICE		0x20600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x20640000
+#else /* NOR BOOT */
+#define CONFIG_BS_ADDR_DEVICE		0x580600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x580640000
+#endif /*ifdef CONFIG_QSPI_BOOT */
+#define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00004000
+#define CONFIG_BS_ADDR_RAM		0xa0600000
+#define CONFIG_BS_HDR_ADDR_RAM		0xa0640000
+#else
+#ifdef CONFIG_SD_BOOT
+/* For SD boot address and size are assigned in terms of sector
+ * offset and no. of sectors respectively.
+ */
+#define CONFIG_BS_ADDR_DEVICE		0x00003000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00003200
+#define CONFIG_BS_SIZE			0x00000008
+#define CONFIG_BS_HDR_SIZE		0x00000010
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BS_ADDR_DEVICE		0x00600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00640000
+#define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00002000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BS_ADDR_DEVICE		0x40600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x40640000
+#define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00002000
+#else /* Default NOR Boot */
+#define CONFIG_BS_ADDR_DEVICE		0x60600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x60640000
+#define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00002000
+#endif
+#define CONFIG_BS_ADDR_RAM		0x81000000
+#define CONFIG_BS_HDR_ADDR_RAM		0x81020000
+#endif
+
+#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
+#define CONFIG_BOOTSCRIPT_ADDR		CONFIG_BS_ADDR_RAM
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_RAM
+#else
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_DEVICE
+/* BOOTSCRIPT_ADDR is not required */
+#endif
+
+#ifdef CONFIG_FSL_LS_PPA
+/* Define the key hash here if SRK used for signing PPA image is
+ * different from SRK hash put in SFP used for U-Boot.
+ * Example
+ * #define PPA_KEY_HASH \
+ *	"41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
+ */
+#define PPA_KEY_HASH		NULL
+#endif /* ifdef CONFIG_FSL_LS_PPA */
+
+#include <config_fsl_chain_trust.h>
+#endif /* #ifndef CONFIG_SPL_BUILD */
+#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/gic-v3.h b/roms/u-boot/arch/arm/include/asm/gic-v3.h
new file mode 100644
index 000000000..35efec78c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/gic-v3.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Broadcom.
+ */
+
+#ifndef __GIC_V3_H__
+#define __GIC_V3_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define GICR_CTLR_ENABLE_LPIS		BIT(0)
+#define GICR_CTLR_RWP			BIT(3)
+
+#define GICR_TYPER_CPU_NUMBER(r)	(((r) >> 8) & 0xffff)
+
+#define GICR_WAKER_PROCESSORSLEEP	BIT(1)
+#define GICR_WAKER_CHILDRENASLEEP	BIT(2)
+
+#define GIC_BASER_CACHE_NCNB		0ULL
+#define GIC_BASER_CACHE_SAMEASINNER	0ULL
+#define GIC_BASER_CACHE_NC		1ULL
+#define GIC_BASER_CACHE_RAWT		2ULL
+#define GIC_BASER_CACHE_RAWB		3ULL
+#define GIC_BASER_CACHE_WAWT		4ULL
+#define GIC_BASER_CACHE_WAWB		5ULL
+#define GIC_BASER_CACHE_RAWAWT		6ULL
+#define GIC_BASER_CACHE_RAWAWB		7ULL
+#define GIC_BASER_CACHE_MASK		7ULL
+#define GIC_BASER_NONSHAREABLE		0ULL
+#define GIC_BASER_INNERSHAREABLE	1ULL
+#define GIC_BASER_OUTERSHAREABLE	2ULL
+#define GIC_BASER_SHAREABILITY_MASK	3ULL
+
+#define GIC_BASER_CACHEABILITY(reg, inner_outer, type)	\
+	(GIC_BASER_CACHE_##type << reg##_##inner_outer##_CACHEABILITY_SHIFT)
+
+#define GIC_BASER_SHAREABILITY(reg, type)	\
+	(GIC_BASER_##type << reg##_SHAREABILITY_SHIFT)
+
+/* encode a size field of width @w containing @n - 1 units */
+#define GIC_ENCODE_SZ(n, w) (((unsigned long)(n) - 1) &\
+			     GENMASK_ULL(((w) - 1), 0))
+
+#define GICR_PROPBASER_SHAREABILITY_SHIFT		(10)
+#define GICR_PROPBASER_INNER_CACHEABILITY_SHIFT		(7)
+#define GICR_PROPBASER_OUTER_CACHEABILITY_SHIFT		(56)
+#define GICR_PROPBASER_SHAREABILITY_MASK	\
+	GIC_BASER_SHAREABILITY(GICR_PROPBASER, SHAREABILITY_MASK)
+#define GICR_PROPBASER_INNER_CACHEABILITY_MASK	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, MASK)
+#define GICR_PROPBASER_OUTER_CACHEABILITY_MASK	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, OUTER, MASK)
+#define GICR_PROPBASER_CACHEABILITY_MASK GICR_PROPBASER_INNER_CACHEABILITY_MASK
+
+#define GICR_PROPBASER_INNERSHAREABLE	\
+	GIC_BASER_SHAREABILITY(GICR_PROPBASER, INNERSHAREABLE)
+
+#define GICR_PROPBASER_NCNB	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, NCNB)
+#define GICR_PROPBASER_NC	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, NC)
+#define GICR_PROPBASER_RAWT	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, RAWT)
+#define GICR_PROPBASER_RAWB	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, RAWB)
+#define GICR_PROPBASER_WAWT	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, WAWT)
+#define GICR_PROPBASER_WAWB	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, WAWB)
+#define GICR_PROPBASER_RAWAWT	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, RAWAWT)
+#define GICR_PROPBASER_RAWAWB	\
+	GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, RAWAWB)
+
+#define GICR_PROPBASER_IDBITS_MASK	(0x1f)
+#define GICR_PROPBASER_ADDRESS(x)	((x) & GENMASK_ULL(51, 12))
+#define GICR_PENDBASER_ADDRESS(x)	((x) & GENMASK_ULL(51, 16))
+
+#define GICR_PENDBASER_SHAREABILITY_SHIFT		(10)
+#define GICR_PENDBASER_INNER_CACHEABILITY_SHIFT		(7)
+#define GICR_PENDBASER_OUTER_CACHEABILITY_SHIFT		(56)
+#define GICR_PENDBASER_SHAREABILITY_MASK	\
+	GIC_BASER_SHAREABILITY(GICR_PENDBASER, SHAREABILITY_MASK)
+#define GICR_PENDBASER_INNER_CACHEABILITY_MASK	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, MASK)
+#define GICR_PENDBASER_OUTER_CACHEABILITY_MASK	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, OUTER, MASK)
+#define GICR_PENDBASER_CACHEABILITY_MASK	\
+	GICR_PENDBASER_INNER_CACHEABILITY_MASK
+
+#define GICR_PENDBASER_INNERSHAREABLE	\
+	GIC_BASER_SHAREABILITY(GICR_PENDBASER, INNERSHAREABLE)
+
+#define GICR_PENDBASER_NCNB	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, NCNB)
+#define GICR_PENDBASER_NC	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, NC)
+#define GICR_PENDBASER_RAWT	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, RAWT)
+#define GICR_PENDBASER_RAWB	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, RAWB)
+#define GICR_PENDBASER_WAWT	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, WAWT)
+#define GICR_PENDBASER_WAWB	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, WAWB)
+#define GICR_PENDBASER_RAWAWT	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, RAWAWT)
+#define GICR_PENDBASER_RAWAWB	\
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, RAWAWB)
+
+#define GICR_PENDBASER_PTZ	BIT_ULL(62)
+
+#define ITS_MAX_LPI_NRBITS	16 /* 64K LPIs */
+
+#define GICD_TYPER_ID_BITS(typer)	((((typer) >> 19) & 0x1f) + 1)
+#define GICD_TYPER_NUM_LPIS(typer)	((((typer) >> 11) & 0x1f) + 1)
+#define GICD_TYPER_IRQS(typer)		((((typer) & 0x1f) + 1) * 32)
+
+/* Message based interrupts support */
+#define GICD_TYPER_MBIS		BIT(16)
+/* LPI support */
+#define GICD_TYPER_LPIS		BIT(17)
+#define GICD_TYPER_RSS		BIT(26)
+
+#define GIC_REDISTRIBUTOR_OFFSET 0x20000
+
+#ifdef CONFIG_GIC_V3_ITS
+int gic_lpi_tables_init(void);
+#else
+int gic_lpi_tables_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_GIC_V3_ITS */
+
+#endif /* __GIC_V3_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/gic.h b/roms/u-boot/arch/arm/include/asm/gic.h
new file mode 100644
index 000000000..bd3a80cdf
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/gic.h
@@ -0,0 +1,110 @@
+#ifndef __GIC_H__
+#define __GIC_H__
+
+/* Register offsets for the ARM generic interrupt controller (GIC) */
+
+#define GIC_DIST_OFFSET		0x1000
+#define GIC_CPU_OFFSET_A9	0x0100
+#define GIC_CPU_OFFSET_A15	0x2000
+
+/* Distributor Registers */
+#define GICD_CTLR		0x0000
+#define GICD_TYPER		0x0004
+#define GICD_IIDR		0x0008
+#define GICD_STATUSR		0x0010
+#define GICD_SETSPI_NSR		0x0040
+#define GICD_CLRSPI_NSR		0x0048
+#define GICD_SETSPI_SR		0x0050
+#define GICD_CLRSPI_SR		0x0058
+#define GICD_SEIR		0x0068
+#define GICD_IGROUPRn		0x0080
+#define GICD_ISENABLERn		0x0100
+#define GICD_ICENABLERn		0x0180
+#define GICD_ISPENDRn		0x0200
+#define GICD_ICPENDRn		0x0280
+#define GICD_ISACTIVERn		0x0300
+#define GICD_ICACTIVERn		0x0380
+#define GICD_IPRIORITYRn	0x0400
+#define GICD_ITARGETSRn		0x0800
+#define GICD_ICFGR		0x0c00
+#define GICD_IGROUPMODRn	0x0d00
+#define GICD_NSACRn		0x0e00
+#define GICD_SGIR		0x0f00
+#define GICD_CPENDSGIRn		0x0f10
+#define GICD_SPENDSGIRn		0x0f20
+#define GICD_IROUTERn		0x6000
+
+/* Cpu Interface Memory Mapped Registers */
+#define GICC_CTLR		0x0000
+#define GICC_PMR		0x0004
+#define GICC_BPR		0x0008
+#define GICC_IAR		0x000C
+#define GICC_EOIR		0x0010
+#define GICC_RPR		0x0014
+#define GICC_HPPIR		0x0018
+#define GICC_ABPR		0x001c
+#define GICC_AIAR		0x0020
+#define GICC_AEOIR		0x0024
+#define GICC_AHPPIR		0x0028
+#define GICC_APRn		0x00d0
+#define GICC_NSAPRn		0x00e0
+#define GICC_IIDR		0x00fc
+#define GICC_DIR		0x1000
+
+/* ReDistributor Registers for Control and Physical LPIs */
+#define GICR_CTLR		0x0000
+#define GICR_IIDR		0x0004
+#define GICR_TYPER		0x0008
+#define GICR_STATUSR		0x0010
+#define GICR_WAKER		0x0014
+#define GICR_SETLPIR		0x0040
+#define GICR_CLRLPIR		0x0048
+#define GICR_SEIR		0x0068
+#define GICR_PROPBASER		0x0070
+#define GICR_PENDBASER		0x0078
+#define GICR_INVLPIR		0x00a0
+#define GICR_INVALLR		0x00b0
+#define GICR_SYNCR		0x00c0
+#define GICR_MOVLPIR		0x0100
+#define GICR_MOVALLR		0x0110
+
+/* ReDistributor Registers for SGIs and PPIs */
+#define GICR_IGROUPRn		0x0080
+#define GICR_ISENABLERn		0x0100
+#define GICR_ICENABLERn		0x0180
+#define GICR_ISPENDRn		0x0200
+#define GICR_ICPENDRn		0x0280
+#define GICR_ISACTIVERn		0x0300
+#define GICR_ICACTIVERn		0x0380
+#define GICR_IPRIORITYRn	0x0400
+#define GICR_ICFGR0		0x0c00
+#define GICR_ICFGR1		0x0c04
+#define GICR_IGROUPMODRn	0x0d00
+#define GICR_NSACRn		0x0e00
+
+/* Cpu Interface System Registers */
+#define ICC_IAR0_EL1		S3_0_C12_C8_0
+#define ICC_IAR1_EL1		S3_0_C12_C12_0
+#define ICC_EOIR0_EL1		S3_0_C12_C8_1
+#define ICC_EOIR1_EL1		S3_0_C12_C12_1
+#define ICC_HPPIR0_EL1		S3_0_C12_C8_2
+#define ICC_HPPIR1_EL1		S3_0_C12_C12_2
+#define ICC_BPR0_EL1		S3_0_C12_C8_3
+#define ICC_BPR1_EL1		S3_0_C12_C12_3
+#define ICC_DIR_EL1		S3_0_C12_C11_1
+#define ICC_PMR_EL1		S3_0_C4_C6_0
+#define ICC_RPR_EL1		S3_0_C12_C11_3
+#define ICC_CTLR_EL1		S3_0_C12_C12_4
+#define ICC_CTLR_EL3		S3_6_C12_C12_4
+#define ICC_SRE_EL1		S3_0_C12_C12_5
+#define ICC_SRE_EL2		S3_4_C12_C9_5
+#define ICC_SRE_EL3		S3_6_C12_C12_5
+#define ICC_IGRPEN0_EL1		S3_0_C12_C12_6
+#define ICC_IGRPEN1_EL1		S3_0_C12_C12_7
+#define ICC_IGRPEN1_EL3		S3_6_C12_C12_7
+#define ICC_SEIEN_EL1		S3_0_C12_C13_0
+#define ICC_SGI0R_EL1		S3_0_C12_C11_7
+#define ICC_SGI1R_EL1		S3_0_C12_C11_5
+#define ICC_ASGI1R_EL1		S3_0_C12_C11_6
+
+#endif /* __GIC_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/global_data.h b/roms/u-boot/arch/arm/include/asm/global_data.h
new file mode 100644
index 000000000..79432f3bb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/global_data.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2002-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#ifndef	__ASM_GBL_DATA_H
+#define __ASM_GBL_DATA_H
+
+#ifndef __ASSEMBLY__
+
+#include <config.h>
+
+#include <asm/types.h>
+#include <linux/types.h>
+
+/* Architecture-specific global data */
+struct arch_global_data {
+#if defined(CONFIG_FSL_ESDHC) || defined(CONFIG_FSL_ESDHC_IMX)
+	u32 sdhc_clk;
+#endif
+
+#if defined(CONFIG_FSL_ESDHC)
+	u32 sdhc_per_clk;
+#endif
+
+#if defined(CONFIG_U_QE)
+	u32 qe_clk;
+	u32 brg_clk;
+	uint mp_alloc_base;
+	uint mp_alloc_top;
+#endif /* CONFIG_U_QE */
+
+#ifdef CONFIG_AT91FAMILY
+	/* "static data" needed by at91's clock.c */
+	unsigned long	cpu_clk_rate_hz;
+	unsigned long	main_clk_rate_hz;
+	unsigned long	mck_rate_hz;
+	unsigned long	plla_rate_hz;
+	unsigned long	pllb_rate_hz;
+	unsigned long	at91_pllb_usb_init;
+#endif
+	/* "static data" needed by most of timer.c on ARM platforms */
+	unsigned long timer_rate_hz;
+	unsigned int tbu;
+	unsigned int tbl;
+	unsigned long lastinc;
+	unsigned long long timer_reset_value;
+#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+	unsigned long tlb_addr;
+	unsigned long tlb_size;
+#if defined(CONFIG_ARM64)
+	unsigned long tlb_fillptr;
+	unsigned long tlb_emerg;
+#endif
+#endif
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#define MEM_RESERVE_SECURE_SECURED	0x1
+#define MEM_RESERVE_SECURE_MAINTAINED	0x2
+#define MEM_RESERVE_SECURE_ADDR_MASK	(~0x3)
+	/*
+	 * Secure memory addr
+	 * This variable needs maintenance if the RAM base is not zero,
+	 * or if RAM splits into non-consecutive banks. It also has a
+	 * flag indicating the secure memory is marked as secure by MMU.
+	 * Flags used: 0x1 secured
+	 *             0x2 maintained
+	 */
+	phys_addr_t secure_ram;
+	unsigned long tlb_allocated;
+#endif
+#ifdef CONFIG_RESV_RAM
+	/*
+	 * Reserved RAM for memory resident, eg. Management Complex (MC)
+	 * driver which continues to run after U-Boot exits.
+	 */
+	phys_addr_t resv_ram;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+	u32 omap_boot_device;
+	u32 omap_boot_mode;
+	u8 omap_ch_flags;
+#endif
+#if defined(CONFIG_FSL_LSCH3) && defined(CONFIG_SYS_FSL_HAS_DP_DDR)
+	unsigned long mem2_clk;
+#endif
+
+#ifdef CONFIG_ARCH_IMX8
+	struct udevice *scu_dev;
+#endif
+};
+
+#include <asm-generic/global_data.h>
+
+#if defined(__clang__) || defined(CONFIG_LTO)
+
+#define DECLARE_GLOBAL_DATA_PTR
+#define gd	get_gd()
+
+static inline gd_t *get_gd(void)
+{
+	gd_t *gd_ptr;
+
+#ifdef CONFIG_ARM64
+	__asm__ volatile("mov %0, x18\n" : "=r" (gd_ptr));
+#else
+	__asm__ volatile("mov %0, r9\n" : "=r" (gd_ptr));
+#endif
+
+	return gd_ptr;
+}
+
+#else
+
+#ifdef CONFIG_ARM64
+#define DECLARE_GLOBAL_DATA_PTR		register volatile gd_t *gd asm ("x18")
+#else
+#define DECLARE_GLOBAL_DATA_PTR		register volatile gd_t *gd asm ("r9")
+#endif
+#endif
+
+static inline void set_gd(volatile gd_t *gd_ptr)
+{
+#ifdef CONFIG_ARM64
+	__asm__ volatile("ldr x18, %0\n" : : "m"(gd_ptr));
+#elif __ARM_ARCH >= 7
+	__asm__ volatile("ldr r9, %0\n" : : "m"(gd_ptr));
+#else
+	__asm__ volatile("mov r9, %0\n" : : "r"(gd_ptr));
+#endif
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_GBL_DATA_H */
diff --git a/roms/u-boot/arch/arm/include/asm/gpio.h b/roms/u-boot/arch/arm/include/asm/gpio.h
new file mode 100644
index 000000000..760936788
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/gpio.h
@@ -0,0 +1,10 @@
+#if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) && \
+	!defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM68360) && \
+	!defined(CONFIG_ARCH_BCM6858) && !defined(CONFIG_ARCH_BCM63158) && \
+	!defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_ASPEED) && \
+	!defined(CONFIG_ARCH_U8500) && !defined(CONFIG_CORTINA_PLATFORM) && \
+	!defined(CONFIG_TARGET_BCMNS3) && !defined(CONFIG_TARGET_TOTAL_COMPUTE) && \
+	!defined(CONFIG_ARCH_QEMU)
+#include <asm/arch/gpio.h>
+#endif
+#include <asm-generic/gpio.h>
diff --git a/roms/u-boot/arch/arm/include/asm/handoff.h b/roms/u-boot/arch/arm/include/asm/handoff.h
new file mode 100644
index 000000000..0790d2ab1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/handoff.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Architecture-specific SPL handoff information for ARM
+ *
+ * Copyright 2019 Amarula Solutions, BV
+ * Written by Michael Trimarchi <michael@amarulasolutions.com>
+ */
+
+#ifndef __asm_handoff_h
+#define __asm_handoff_h
+
+/**
+ * struct arch_spl_handoff - architecture-specific handoff info
+ *
+ * @usable_ram_top: Value returned by board_get_usable_ram_top() in SPL
+ */
+struct arch_spl_handoff {
+	ulong usable_ram_top;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/hardware.h b/roms/u-boot/arch/arm/include/asm/hardware.h
new file mode 100644
index 000000000..1fd1a5b65
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/hardware.h
@@ -0,0 +1,18 @@
+/*
+ *  linux/include/asm-arm/hardware.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Common hardware definitions
+ */
+
+#ifndef __ASM_HARDWARE_H
+#define __ASM_HARDWARE_H
+
+#include <asm/arch/hardware.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/io.h b/roms/u-boot/arch/arm/include/asm/io.h
new file mode 100644
index 000000000..df264a170
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/io.h
@@ -0,0 +1,498 @@
+/*
+ *  linux/include/asm-arm/io.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
+ *			constant addresses and variable addresses.
+ *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
+ *			specific IO header files.
+ *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
+ *  04-Apr-1999	PJB	Added check_signature.
+ *  12-Dec-1999	RMK	More cleanups
+ *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
+ */
+#ifndef __ASM_ARM_IO_H
+#define __ASM_ARM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+#include <asm/barriers.h>
+#if 0	/* XXX###XXX */
+#include <asm/arch/hardware.h>
+#endif	/* XXX###XXX */
+
+static inline void sync(void)
+{
+}
+
+/*
+ * Generic virtual read/write.  Note that we don't support half-word
+ * read/writes.  We define __arch_*[bl] here, and leave __arch_*w
+ * to the architecture specific code.
+ */
+#define __arch_getb(a)			(*(volatile unsigned char *)(a))
+#define __arch_getw(a)			(*(volatile unsigned short *)(a))
+#define __arch_getl(a)			(*(volatile unsigned int *)(a))
+#define __arch_getq(a)			(*(volatile unsigned long long *)(a))
+
+#define __arch_putb(v,a)		(*(volatile unsigned char *)(a) = (v))
+#define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+#define __arch_putq(v,a)		(*(volatile unsigned long long *)(a) = (v))
+
+static inline void __raw_writesb(unsigned long addr, const void *data,
+				 int bytelen)
+{
+	uint8_t *buf = (uint8_t *)data;
+	while(bytelen--)
+		__arch_putb(*buf++, addr);
+}
+
+static inline void __raw_writesw(unsigned long addr, const void *data,
+				 int wordlen)
+{
+	uint16_t *buf = (uint16_t *)data;
+	while(wordlen--)
+		__arch_putw(*buf++, addr);
+}
+
+static inline void __raw_writesl(unsigned long addr, const void *data,
+				 int longlen)
+{
+	uint32_t *buf = (uint32_t *)data;
+	while(longlen--)
+		__arch_putl(*buf++, addr);
+}
+
+static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+{
+	uint8_t *buf = (uint8_t *)data;
+	while(bytelen--)
+		*buf++ = __arch_getb(addr);
+}
+
+static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+{
+	uint16_t *buf = (uint16_t *)data;
+	while(wordlen--)
+		*buf++ = __arch_getw(addr);
+}
+
+static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+{
+	uint32_t *buf = (uint32_t *)data;
+	while(longlen--)
+		*buf++ = __arch_getl(addr);
+}
+
+#define __raw_writeb(v,a)	__arch_putb(v,a)
+#define __raw_writew(v,a)	__arch_putw(v,a)
+#define __raw_writel(v,a)	__arch_putl(v,a)
+#define __raw_writeq(v,a)	__arch_putq(v,a)
+
+#define __raw_readb(a)		__arch_getb(a)
+#define __raw_readw(a)		__arch_getw(a)
+#define __raw_readl(a)		__arch_getl(a)
+#define __raw_readq(a)		__arch_getq(a)
+
+/*
+ * TODO: The kernel offers some more advanced versions of barriers, it might
+ * have some advantages to use them instead of the simple one here.
+ */
+#define mb()		dsb()
+#define rmb()		dsb()
+#define wmb()		dsb()
+#define __iormb()	dmb()
+#define __iowmb()	dmb()
+
+#define smp_processor_id()	0
+
+#define writeb(v,c)	({ u8  __v = v; __iowmb(); __arch_putb(__v,c); __v; })
+#define writew(v,c)	({ u16 __v = v; __iowmb(); __arch_putw(__v,c); __v; })
+#define writel(v,c)	({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
+#define writeq(v,c)	({ u64 __v = v; __iowmb(); __arch_putq(__v,c); __v; })
+
+#define readb(c)	({ u8  __v = __arch_getb(c); __iormb(); __v; })
+#define readw(c)	({ u16 __v = __arch_getw(c); __iormb(); __v; })
+#define readl(c)	({ u32 __v = __arch_getl(c); __iormb(); __v; })
+#define readq(c)	({ u64 __v = __arch_getq(c); __iormb(); __v; })
+
+/*
+ * Relaxed I/O memory access primitives. These follow the Device memory
+ * ordering rules but do not guarantee any ordering relative to Normal memory
+ * accesses.
+ */
+#define readb_relaxed(c)	({ u8  __r = __raw_readb(c); __r; })
+#define readw_relaxed(c)	({ u16 __r = le16_to_cpu((__force __le16) \
+						__raw_readw(c)); __r; })
+#define readl_relaxed(c)	({ u32 __r = le32_to_cpu((__force __le32) \
+						__raw_readl(c)); __r; })
+#define readq_relaxed(c)	({ u64 __r = le64_to_cpu((__force __le64) \
+						__raw_readq(c)); __r; })
+
+#define writeb_relaxed(v, c)	((void)__raw_writeb((v), (c)))
+#define writew_relaxed(v, c)	((void)__raw_writew((__force u16) \
+						    cpu_to_le16(v), (c)))
+#define writel_relaxed(v, c)	((void)__raw_writel((__force u32) \
+						    cpu_to_le32(v), (c)))
+#define writeq_relaxed(v, c)	((void)__raw_writeq((__force u64) \
+						    cpu_to_le64(v), (c)))
+
+/*
+ * The compiler seems to be incapable of optimising constants
+ * properly.  Spell it out to the compiler in some cases.
+ * These are only valid for small values of "off" (< 1<<12)
+ */
+#define __raw_base_writeb(val,base,off)	__arch_base_putb(val,base,off)
+#define __raw_base_writew(val,base,off)	__arch_base_putw(val,base,off)
+#define __raw_base_writel(val,base,off)	__arch_base_putl(val,base,off)
+
+#define __raw_base_readb(base,off)	__arch_base_getb(base,off)
+#define __raw_base_readw(base,off)	__arch_base_getw(base,off)
+#define __raw_base_readl(base,off)	__arch_base_getl(base,off)
+
+/*
+ * Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define out_arch(type,endian,a,v)	__raw_write##type(cpu_to_##endian(v),a)
+#define in_arch(type,endian,a)		endian##_to_cpu(__raw_read##type(a))
+
+#define out_le64(a,v)	out_arch(q,le64,a,v)
+#define out_le32(a,v)	out_arch(l,le32,a,v)
+#define out_le16(a,v)	out_arch(w,le16,a,v)
+
+#define in_le64(a)	in_arch(q,le64,a)
+#define in_le32(a)	in_arch(l,le32,a)
+#define in_le16(a)	in_arch(w,le16,a)
+
+#define out_be64(a,v)	out_arch(l,be64,a,v)
+#define out_be32(a,v)	out_arch(l,be32,a,v)
+#define out_be16(a,v)	out_arch(w,be16,a,v)
+
+#define in_be64(a)	in_arch(l,be64,a)
+#define in_be32(a)	in_arch(l,be32,a)
+#define in_be16(a)	in_arch(w,be16,a)
+
+#define out_64(a,v)	__raw_writeq(v,a)
+#define out_32(a,v)	__raw_writel(v,a)
+#define out_16(a,v)	__raw_writew(v,a)
+#define out_8(a,v)	__raw_writeb(v,a)
+
+#define in_64(a)	__raw_readq(a)
+#define in_32(a)	__raw_readl(a)
+#define in_16(a)	__raw_readw(a)
+#define in_8(a)		__raw_readb(a)
+
+#define clrbits(type, addr, clear) \
+	out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+	out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_32(addr, clear) clrbits(32, addr, clear)
+#define setbits_32(addr, set) setbits(32, addr, set)
+#define clrsetbits_32(addr, clear, set) clrsetbits(32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_16(addr, clear) clrbits(16, addr, clear)
+#define setbits_16(addr, set) setbits(16, addr, set)
+#define clrsetbits_16(addr, clear, set) clrsetbits(16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
+#define clrbits_be64(addr, clear) clrbits(be64, addr, clear)
+#define setbits_be64(addr, set) setbits(be64, addr, set)
+#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
+
+#define clrbits_le64(addr, clear) clrbits(le64, addr, clear)
+#define setbits_le64(addr, set) setbits(le64, addr, set)
+#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
+
+#define clrbits_64(addr, clear) clrbits(64, addr, clear)
+#define setbits_64(addr, set) setbits(64, addr, set)
+#define clrsetbits_64(addr, clear, set) clrsetbits(64, addr, clear, set)
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+#if 0	/* XXX###XXX */
+#include <asm/arch/io.h>
+#endif	/* XXX###XXX */
+
+/*
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerous
+ * ARM documents:
+ *
+ *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
+ *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions.  Note that
+ * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+ */
+#ifdef __io
+#define outb(v,p)			__raw_writeb(v,__io(p))
+#define outw(v,p)			__raw_writew(cpu_to_le16(v),__io(p))
+#define outl(v,p)			__raw_writel(cpu_to_le32(v),__io(p))
+
+#define inb(p)	({ unsigned int __v = __raw_readb(__io(p)); __v; })
+#define inw(p)	({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; })
+#define inl(p)	({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; })
+
+#define outsb(p,d,l)			__raw_writesb(__io(p),d,l)
+#define outsw(p,d,l)			__raw_writesw(__io(p),d,l)
+#define outsl(p,d,l)			__raw_writesl(__io(p),d,l)
+
+#define insb(p,d,l)			__raw_readsb(__io(p),d,l)
+#define insw(p,d,l)			__raw_readsw(__io(p),d,l)
+#define insl(p,d,l)			__raw_readsl(__io(p),d,l)
+#endif
+
+#define outb_p(val,port)		outb((val),(port))
+#define outw_p(val,port)		outw((val),(port))
+#define outl_p(val,port)		outl((val),(port))
+#define inb_p(port)			inb((port))
+#define inw_p(port)			inw((port))
+#define inl_p(port)			inl((port))
+
+#define outsb_p(port,from,len)		outsb(port,from,len)
+#define outsw_p(port,from,len)		outsw(port,from,len)
+#define outsl_p(port,from,len)		outsl(port,from,len)
+#define insb_p(port,to,len)		insb(port,to,len)
+#define insw_p(port,to,len)		insw(port,to,len)
+#define insl_p(port,to,len)		insl(port,to,len)
+
+#define writesl(a, d, s)	__raw_writesl((unsigned long)a, d, s)
+#define readsl(a, d, s)		__raw_readsl((unsigned long)a, d, s)
+#define writesw(a, d, s)	__raw_writesw((unsigned long)a, d, s)
+#define readsw(a, d, s)		__raw_readsw((unsigned long)a, d, s)
+#define writesb(a, d, s)	__raw_writesb((unsigned long)a, d, s)
+#define readsb(a, d, s)		__raw_readsb((unsigned long)a, d, s)
+
+/*
+ * DMA-consistent mapping functions.  These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices.  This is the "generic" version.  The PCI specific version
+ * is in pci.h
+ */
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
+extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
+extern void consistent_sync(void *vaddr, size_t size, int rw);
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, unsigned long, size_t);
+extern void _memcpy_toio(unsigned long, const void *, size_t);
+extern void _memset_io(unsigned long, int, size_t);
+
+extern void __readwrite_bug(const char *fn);
+
+/* Optimized copy functions to read from/write to IO sapce */
+#ifdef CONFIG_ARM64
+/*
+ * Copy data from IO memory space to "real" memory space.
+ */
+static inline
+void __memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
+{
+	while (count && !IS_ALIGNED((unsigned long)from, 8)) {
+		*(u8 *)to = __raw_readb(from);
+		from++;
+		to++;
+		count--;
+	}
+
+	while (count >= 8) {
+		*(u64 *)to = __raw_readq(from);
+		from += 8;
+		to += 8;
+		count -= 8;
+	}
+
+	while (count) {
+		*(u8 *)to = __raw_readb(from);
+		from++;
+		to++;
+		count--;
+	}
+}
+
+/*
+ * Copy data from "real" memory space to IO memory space.
+ */
+static inline
+void __memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
+{
+	while (count && !IS_ALIGNED((unsigned long)to, 8)) {
+		__raw_writeb(*(u8 *)from, to);
+		from++;
+		to++;
+		count--;
+	}
+
+	while (count >= 8) {
+		__raw_writeq(*(u64 *)from, to);
+		from += 8;
+		to += 8;
+		count -= 8;
+	}
+
+	while (count) {
+		__raw_writeb(*(u8 *)from, to);
+		from++;
+		to++;
+		count--;
+	}
+}
+
+/*
+ * "memset" on IO memory space.
+ */
+static inline
+void __memset_io(volatile void __iomem *dst, int c, size_t count)
+{
+	u64 qc = (u8)c;
+
+	qc |= qc << 8;
+	qc |= qc << 16;
+	qc |= qc << 32;
+
+	while (count && !IS_ALIGNED((unsigned long)dst, 8)) {
+		__raw_writeb(c, dst);
+		dst++;
+		count--;
+	}
+
+	while (count >= 8) {
+		__raw_writeq(qc, dst);
+		dst += 8;
+		count -= 8;
+	}
+
+	while (count) {
+		__raw_writeb(c, dst);
+		dst++;
+		count--;
+	}
+}
+#endif /* CONFIG_ARM64 */
+
+#ifdef CONFIG_ARM64
+#define memset_io(a, b, c)		__memset_io((a), (b), (c))
+#define memcpy_fromio(a, b, c)		__memcpy_fromio((a), (b), (c))
+#define memcpy_toio(a, b, c)		__memcpy_toio((a), (b), (c))
+#else
+#define memset_io(a, b, c)		memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c)		memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c)		memcpy((void *)(a), (b), (c))
+#endif
+
+/*
+ * If this architecture has ISA IO, then define the isa_read/isa_write
+ * macros.
+ */
+#ifdef __mem_isa
+
+#define isa_readb(addr)			__raw_readb(__mem_isa(addr))
+#define isa_readw(addr)			__raw_readw(__mem_isa(addr))
+#define isa_readl(addr)			__raw_readl(__mem_isa(addr))
+#define isa_writeb(val,addr)		__raw_writeb(val,__mem_isa(addr))
+#define isa_writew(val,addr)		__raw_writew(val,__mem_isa(addr))
+#define isa_writel(val,addr)		__raw_writel(val,__mem_isa(addr))
+#define isa_memset_io(a,b,c)		_memset_io(__mem_isa(a),(b),(c))
+#define isa_memcpy_fromio(a,b,c)	_memcpy_fromio((a),__mem_isa(b),(c))
+#define isa_memcpy_toio(a,b,c)		_memcpy_toio(__mem_isa((a)),(b),(c))
+
+#define isa_eth_io_copy_and_sum(a,b,c,d) \
+				eth_copy_and_sum((a),__mem_isa(b),(c),(d))
+
+static inline int
+isa_check_signature(unsigned long io_addr, const unsigned char *signature,
+		    int length)
+{
+	int retval = 0;
+	do {
+		if (isa_readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+#else	/* __mem_isa */
+
+#define isa_readb(addr)			(__readwrite_bug("isa_readb"),0)
+#define isa_readw(addr)			(__readwrite_bug("isa_readw"),0)
+#define isa_readl(addr)			(__readwrite_bug("isa_readl"),0)
+#define isa_writeb(val,addr)		__readwrite_bug("isa_writeb")
+#define isa_writew(val,addr)		__readwrite_bug("isa_writew")
+#define isa_writel(val,addr)		__readwrite_bug("isa_writel")
+#define isa_memset_io(a,b,c)		__readwrite_bug("isa_memset_io")
+#define isa_memcpy_fromio(a,b,c)	__readwrite_bug("isa_memcpy_fromio")
+#define isa_memcpy_toio(a,b,c)		__readwrite_bug("isa_memcpy_toio")
+
+#define isa_eth_io_copy_and_sum(a,b,c,d) \
+				__readwrite_bug("isa_eth_io_copy_and_sum")
+
+#define isa_check_signature(io,sig,len)	(0)
+
+#endif	/* __mem_isa */
+#endif	/* __KERNEL__ */
+
+#include <asm-generic/io.h>
+#include <iotrace.h>
+
+#endif	/* __ASM_ARM_IO_H */
diff --git a/roms/u-boot/arch/arm/include/asm/iproc-common/armpll.h b/roms/u-boot/arch/arm/include/asm/iproc-common/armpll.h
new file mode 100644
index 000000000..f5b60b191
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/iproc-common/armpll.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#ifndef __ARMPLL_H
+#define __ARMPLL_H
+
+#include <linux/types.h>
+
+uint32_t armpll_config(uint32_t clkmhz);
+
+#endif /*__ARMPLL_H */
diff --git a/roms/u-boot/arch/arm/include/asm/iproc-common/configs.h b/roms/u-boot/arch/arm/include/asm/iproc-common/configs.h
new file mode 100644
index 000000000..4733c0793
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/iproc-common/configs.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#ifndef __IPROC_COMMON_CONFIGS_H
+#define __IPROC_COMMON_CONFIGS_H
+
+#include <linux/stringify.h>
+
+/* Architecture, CPU, chip, etc */
+#define CONFIG_IPROC
+
+/* Memory Info */
+#define CONFIG_SYS_SDRAM_BASE		0x61000000
+
+#endif /* __IPROC_COMMON_CONFIGS_H */
diff --git a/roms/u-boot/arch/arm/include/asm/iproc-common/iproc_sdhci.h b/roms/u-boot/arch/arm/include/asm/iproc-common/iproc_sdhci.h
new file mode 100644
index 000000000..4e299217f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/iproc-common/iproc_sdhci.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: <SPDX License Expression> */
+/*
+ * Copyright 2019 Broadcom
+ *
+ */
+
+#ifndef __IPROC_SDHCI_H
+#define __IPROC_SDHCI_H
+
+int iproc_sdhci_init(int dev_index, u32 quirks);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/iproc-common/sysmap.h b/roms/u-boot/arch/arm/include/asm/iproc-common/sysmap.h
new file mode 100644
index 000000000..efd2f35f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/iproc-common/sysmap.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#ifndef __SYSMAP_H
+#define __SYSMAP_H
+
+#define IHOST_PROC_CLK_PLLARMA					0X19000C00
+#define IHOST_PROC_CLK_PLLARMB					0X19000C04
+#define IHOST_PROC_CLK_PLLARMA__PLLARM_PDIV_R				24
+
+#define IHOST_PROC_CLK_WR_ACCESS				0X19000000
+#define IHOST_PROC_CLK_POLICY_FREQ				0X19000008
+#define IHOST_PROC_CLK_POLICY_FREQ__PRIV_ACCESS_MODE			31
+#define IHOST_PROC_CLK_POLICY_FREQ__POLICY3_FREQ_R			24
+#define IHOST_PROC_CLK_POLICY_FREQ__POLICY2_FREQ_R			16
+#define IHOST_PROC_CLK_POLICY_FREQ__POLICY1_FREQ_R			 8
+#define IHOST_PROC_CLK_POLICY_CTL				0X1900000C
+#define IHOST_PROC_CLK_POLICY_CTL__GO					 0
+#define IHOST_PROC_CLK_POLICY_CTL__GO_AC				 1
+#define IHOST_PROC_CLK_PLLARMB__PLLARM_NDIV_FRAC_R			 0
+#define IHOST_PROC_CLK_PLLARMB__PLLARM_NDIV_FRAC_WIDTH			20
+#define IHOST_PROC_CLK_PLLARMA__PLLARM_LOCK				28
+#define IHOST_PROC_CLK_POLICY_FREQ__POLICY0_FREQ_R			 0
+#define IHOST_PROC_CLK_PLLARMA__PLLARM_NDIV_INT_R			 8
+#define IHOST_PROC_CLK_PLLARMA__PLLARM_SOFT_POST_RESETB			 1
+#define IHOST_PROC_CLK_PLLARMA__PLLARM_SOFT_RESETB			 0
+#define IHOST_PROC_CLK_CORE0_CLKGATE				0X19000200
+#define IHOST_PROC_CLK_CORE1_CLKGATE				0X19000204
+#define IHOST_PROC_CLK_ARM_SWITCH_CLKGATE			0X19000210
+#define IHOST_PROC_CLK_ARM_PERIPH_CLKGATE			0X19000300
+#define IHOST_PROC_CLK_APB0_CLKGATE				0X19000400
+#define IPROC_CLKCT_HDELAY_SW_EN				0x00000303
+
+#define IPROC_REG_WRITE_ACCESS					0x00a5a501
+
+#define IPROC_PERIPH_BASE					0x19020000
+#define IPROC_PERIPH_INT_CTRL_REG_BASE		(IPROC_PERIPH_BASE +  0x100)
+#define IPROC_PERIPH_GLB_TIM_REG_BASE		(IPROC_PERIPH_BASE +  0x200)
+#define IPROC_PERIPH_PVT_TIM_REG_BASE		(IPROC_PERIPH_BASE +  0x600)
+#define IPROC_PERIPH_INT_DISTR_REG_BASE		(IPROC_PERIPH_BASE + 0x1000)
+
+#define PLL_AXI_CLK						0x1DCD6500
+
+#endif /* __SYSMAP_H */
diff --git a/roms/u-boot/arch/arm/include/asm/iproc-common/timer.h b/roms/u-boot/arch/arm/include/asm/iproc-common/timer.h
new file mode 100644
index 000000000..44810c863
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/iproc-common/timer.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Broadcom Corporation.
+ */
+
+#ifndef __TIMER_H
+#define __TIMER_H
+
+#include <linux/types.h>
+
+void timer_systick_init(uint32_t tick_ms);
+void timer_global_init(void);
+
+/* ARM A9 Private Timer */
+#define TIMER_PVT_LOAD_OFFSET			0x00000000
+#define TIMER_PVT_COUNTER_OFFSET		0x00000004
+#define TIMER_PVT_CTRL_OFFSET			0x00000008
+#define TIMER_PVT_STATUS_OFFSET			0x0000000C
+#define TIMER_PVT_TIM_CTRL_TIM_EN		0x00000001
+#define TIMER_PVT_TIM_CTRL_AUTO_RELD		0x00000002
+#define TIMER_PVT_TIM_CTRL_INT_EN		0x00000004
+#define TIMER_PVT_TIM_CTRL_PRESC_MASK		0x0000FF00
+#define TIMER_PVT_TIM_INT_STATUS_SET		0x00000001
+
+/* Global timer */
+#define TIMER_GLB_LOW_OFFSET			0x00000000
+#define TIMER_GLB_HI_OFFSET			0x00000004
+#define TIMER_GLB_CTRL_OFFSET			0x00000008
+#define TIMER_GLB_TIM_CTRL_TIM_EN		0x00000001
+#define TIMER_GLB_TIM_CTRL_COMP_EN		0x00000002
+#define TIMER_GLB_TIM_CTRL_INT_EN		0x00000004
+#define TIMER_GLB_TIM_CTRL_AUTO_INC		0x00000008
+#define TIMER_GLB_TIM_CTRL_PRESC_MASK		0x0000FF00
+#define TIMER_GLB_TIM_INT_STATUS_SET		0x00000001
+
+#endif /*__TIMER_H */
diff --git a/roms/u-boot/arch/arm/include/asm/kona-common/clk.h b/roms/u-boot/arch/arm/include/asm/kona-common/clk.h
new file mode 100644
index 000000000..fded004c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/kona-common/clk.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+/* This API file is loosely based on u-boot/drivers/video/ipu.h and linux */
+
+#ifndef __KONA_COMMON_CLK_H
+#define __KONA_COMMON_CLK_H
+
+#include <linux/types.h>
+
+struct clk;
+
+/* Only implement required functions for your specific architecture */
+int clk_init(void);
+struct clk *clk_get(const char *id);
+int clk_enable(struct clk *clk);
+void clk_disable(struct clk *clk);
+unsigned long clk_get_rate(struct clk *clk);
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_rate(struct clk *clk, unsigned long rate);
+int clk_set_parent(struct clk *clk, struct clk *parent);
+struct clk *clk_get_parent(struct clk *clk);
+int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep);
+int clk_bsc_enable(void *base);
+int clk_usb_otg_enable(void *base);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/kona-common/kona_sdhci.h b/roms/u-boot/arch/arm/include/asm/kona-common/kona_sdhci.h
new file mode 100644
index 000000000..22db651a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/kona-common/kona_sdhci.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Broadcom Corporation.
+ */
+
+#ifndef __KONA_SDHCI_H
+#define __KONA_SDHCI_H
+
+int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/linkage.h b/roms/u-boot/arch/arm/include/asm/linkage.h
new file mode 100644
index 000000000..dbe4b4e31
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/boot_mode.h b/roms/u-boot/arch/arm/include/asm/mach-imx/boot_mode.h
new file mode 100644
index 000000000..6dc585596
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/boot_mode.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Boundary Devices Inc.
+ */
+
+#ifndef _ASM_BOOT_MODE_H
+#define _ASM_BOOT_MODE_H
+#define MAKE_CFGVAL(cfg1, cfg2, cfg3, cfg4) \
+	((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1)
+#define MAKE_CFGVAL_PRIMARY_BOOT	0xfffffff0
+#define MAKE_CFGVAL_SECONDARY_BOOT	0xffffffff
+
+enum boot_device {
+	WEIM_NOR_BOOT,
+	ONE_NAND_BOOT,
+	PATA_BOOT,
+	SATA_BOOT,
+	I2C_BOOT,
+	SPI_NOR_BOOT,
+	SD1_BOOT,
+	SD2_BOOT,
+	SD3_BOOT,
+	SD4_BOOT,
+	MMC1_BOOT,
+	MMC2_BOOT,
+	MMC3_BOOT,
+	MMC4_BOOT,
+	NAND_BOOT,
+	QSPI_BOOT,
+	FLEXSPI_BOOT,
+	USB_BOOT,
+	UNKNOWN_BOOT,
+	BOOT_DEV_NUM = UNKNOWN_BOOT,
+};
+
+/* Boot device type */
+#define BOOT_TYPE_SD		0x1
+#define BOOT_TYPE_MMC		0x2
+#define BOOT_TYPE_NAND		0x3
+#define BOOT_TYPE_QSPI		0x4
+#define BOOT_TYPE_WEIM		0x5
+#define BOOT_TYPE_SPINOR	0x6
+#define BOOT_TYPE_USB		0xF
+
+struct boot_mode {
+	const char *name;
+	unsigned cfg_val;
+};
+
+void add_board_boot_modes(const struct boot_mode *p);
+void boot_mode_apply(unsigned cfg_val);
+extern const struct boot_mode soc_boot_modes[];
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/dma.h b/roms/u-boot/arch/arm/include/asm/mach-imx/dma.h
new file mode 100644
index 000000000..55eb84cb8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/dma.h
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 APBH DMA
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2020 NXP
+ */
+
+#ifndef __DMA_H__
+#define __DMA_H__
+
+#include <asm/cache.h>
+#include <linux/list.h>
+#include <linux/compiler.h>
+
+#define DMA_PIO_WORDS		15
+#define MXS_DMA_ALIGNMENT	ARCH_DMA_MINALIGN
+
+/*
+ * MXS DMA channels
+ */
+#if defined(CONFIG_MX23)
+enum {
+	MXS_DMA_CHANNEL_AHB_APBH_LCDIF = 0,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP0,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP1,
+	MXS_DMA_CHANNEL_AHB_APBH_RESERVED0,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+	MXS_MAX_DMA_CHANNELS,
+};
+#elif defined(CONFIG_MX28)
+enum {
+	MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP1,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP2,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP3,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI4,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+	MXS_DMA_CHANNEL_AHB_APBH_HSADC,
+	MXS_DMA_CHANNEL_AHB_APBH_LCDIF,
+	MXS_DMA_CHANNEL_AHB_APBH_RESERVED0,
+	MXS_DMA_CHANNEL_AHB_APBH_RESERVED1,
+	MXS_MAX_DMA_CHANNELS,
+};
+#else
+enum {
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI4,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+	MXS_MAX_DMA_CHANNELS,
+};
+#endif
+
+/*
+ * MXS DMA hardware command.
+ *
+ * This structure describes the in-memory layout of an entire DMA command,
+ * including space for the maximum number of PIO accesses. See the appropriate
+ * reference manual for a detailed description of what these fields mean to the
+ * DMA hardware.
+ */
+#define	MXS_DMA_DESC_COMMAND_MASK	0x3
+#define	MXS_DMA_DESC_COMMAND_OFFSET	0
+#define	MXS_DMA_DESC_COMMAND_NO_DMAXFER	0x0
+#define	MXS_DMA_DESC_COMMAND_DMA_WRITE	0x1
+#define	MXS_DMA_DESC_COMMAND_DMA_READ	0x2
+#define	MXS_DMA_DESC_COMMAND_DMA_SENSE	0x3
+#define	MXS_DMA_DESC_CHAIN		(1 << 2)
+#define	MXS_DMA_DESC_IRQ		(1 << 3)
+#define	MXS_DMA_DESC_NAND_LOCK		(1 << 4)
+#define	MXS_DMA_DESC_NAND_WAIT_4_READY	(1 << 5)
+#define	MXS_DMA_DESC_DEC_SEM		(1 << 6)
+#define	MXS_DMA_DESC_WAIT4END		(1 << 7)
+#define	MXS_DMA_DESC_HALT_ON_TERMINATE	(1 << 8)
+#define	MXS_DMA_DESC_TERMINATE_FLUSH	(1 << 9)
+#define	MXS_DMA_DESC_PIO_WORDS_MASK	(0xf << 12)
+#define	MXS_DMA_DESC_PIO_WORDS_OFFSET	12
+#define	MXS_DMA_DESC_BYTES_MASK		(0xffff << 16)
+#define	MXS_DMA_DESC_BYTES_OFFSET	16
+
+struct mxs_dma_cmd {
+	u32		next;
+	u32		data;
+	union {
+		u32	address;
+		u32	alternate;
+	};
+	u32		pio_words[DMA_PIO_WORDS];
+};
+
+/*
+ * MXS DMA command descriptor.
+ *
+ * This structure incorporates an MXS DMA hardware command structure, along
+ * with metadata.
+ */
+#define	MXS_DMA_DESC_FIRST	(1 << 0)
+#define	MXS_DMA_DESC_LAST	(1 << 1)
+#define	MXS_DMA_DESC_READY	(1 << 31)
+
+struct mxs_dma_desc {
+	struct mxs_dma_cmd	cmd;
+	unsigned int		flags;
+	u32			address;
+	void			*buffer;
+	struct list_head	node;
+} __aligned(MXS_DMA_ALIGNMENT);
+
+/**
+ * MXS DMA channel
+ *
+ * This structure represents a single DMA channel. The MXS platform code
+ * maintains an array of these structures to represent every DMA channel in the
+ * system (see mxs_dma_channels).
+ */
+#define	MXS_DMA_FLAGS_IDLE	0
+#define	MXS_DMA_FLAGS_BUSY	(1 << 0)
+#define	MXS_DMA_FLAGS_FREE	0
+#define	MXS_DMA_FLAGS_ALLOCATED	(1 << 16)
+#define	MXS_DMA_FLAGS_VALID	(1 << 31)
+
+struct mxs_dma_chan {
+	const char *name;
+	unsigned long dev;
+	struct mxs_dma_device *dma;
+	unsigned int flags;
+	unsigned int active_num;
+	unsigned int pending_num;
+	struct list_head active;
+	struct list_head done;
+};
+
+struct mxs_dma_desc *mxs_dma_desc_alloc(void);
+void mxs_dma_desc_free(struct mxs_dma_desc *);
+int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc);
+
+int mxs_dma_go(int chan);
+void mxs_dma_init(void);
+int mxs_dma_init_channel(int chan);
+int mxs_dma_release(int chan);
+
+void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc);
+
+#endif	/* __DMA_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/gpio.h b/roms/u-boot/arch/arm/include/asm/mach-imx/gpio.h
new file mode 100644
index 000000000..1b7c9cd52
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/gpio.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ */
+
+
+#ifndef __ASM_ARCH_IMX_GPIO_H
+#define __ASM_ARCH_IMX_GPIO_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+/* GPIO registers */
+struct gpio_regs {
+	u32 gpio_dr;	/* data */
+	u32 gpio_dir;	/* direction */
+	u32 gpio_psr;	/* pad satus */
+};
+#endif
+
+#define IMX_GPIO_NR(port, index)		((((port)-1)*32)+((index)&31))
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/hab.h b/roms/u-boot/arch/arm/include/asm/mach-imx/hab.h
new file mode 100644
index 000000000..2abf28ea4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/hab.h
@@ -0,0 +1,239 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012-2015 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+*/
+
+#ifndef __SECURE_MX6Q_H__
+#define __SECURE_MX6Q_H__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/*
+ * IVT header definitions
+ * Security Reference Manual for i.MX 7Dual and 7Solo Applications Processors,
+ * Rev. 0, 03/2017
+ * Section : 6.7.1.1
+ */
+#define IVT_HEADER_MAGIC	0xD1
+#define IVT_TOTAL_LENGTH	0x20
+
+struct __packed ivt_header {
+	uint8_t		magic;
+	uint16_t	length;
+	uint8_t		version;
+};
+
+struct ivt {
+	struct ivt_header hdr;	/* IVT header above */
+	uint32_t entry;		/* Absolute address of first instruction */
+	uint32_t reserved1;	/* Reserved should be zero */
+	uint32_t dcd;		/* Absolute address of the image DCD */
+	uint32_t boot;		/* Absolute address of the boot data */
+	uint32_t self;		/* Absolute address of the IVT */
+	uint32_t csf;		/* Absolute address of the CSF */
+	uint32_t reserved2;	/* Reserved should be zero */
+};
+
+struct __packed hab_hdr {
+	u8 tag;              /* Tag field */
+	u8 len[2];           /* Length field in bytes (big-endian) */
+	u8 par;              /* Parameters field */
+};
+
+/* Default event structure */
+struct __packed evt_def {
+	struct hab_hdr hdr;		/* Header */
+	uint32_t sts;			/* Status */
+	uint32_t ctx;			/* Default context */
+	uint8_t *data;			/* Default data location */
+	size_t bytes;			/* Size of default data */
+};
+
+/* -------- start of HAB API updates ------------*/
+/* The following are taken from HAB4 SIS */
+
+/* Status definitions */
+enum hab_status {
+	HAB_STS_ANY = 0x00,
+	HAB_FAILURE = 0x33,
+	HAB_WARNING = 0x69,
+	HAB_SUCCESS = 0xf0
+};
+
+/* Security Configuration definitions */
+enum hab_config {
+	HAB_CFG_RETURN = 0x33,	/* < Field Return IC */
+	HAB_CFG_OPEN = 0xf0,	/* < Non-secure IC */
+	HAB_CFG_CLOSED = 0xcc	/* < Secure IC */
+};
+
+/* State definitions */
+enum hab_state {
+	HAB_STATE_INITIAL = 0x33,	/* Initialising state (transitory) */
+	HAB_STATE_CHECK = 0x55,		/* Check state (non-secure) */
+	HAB_STATE_NONSECURE = 0x66,	/* Non-secure state */
+	HAB_STATE_TRUSTED = 0x99,	/* Trusted state */
+	HAB_STATE_SECURE = 0xaa,	/* Secure state */
+	HAB_STATE_FAIL_SOFT = 0xcc, /* Soft fail state */
+	HAB_STATE_FAIL_HARD = 0xff, /* Hard fail state (terminal) */
+	HAB_STATE_NONE = 0xf0,		/* No security state machine */
+	HAB_STATE_MAX
+};
+
+enum hab_reason {
+	HAB_RSN_ANY = 0x00,			/* Match any reason */
+	HAB_ENG_FAIL = 0x30,		/* Engine failure */
+	HAB_INV_ADDRESS = 0x22,		/* Invalid address: access denied */
+	HAB_INV_ASSERTION = 0x0c,   /* Invalid assertion */
+	HAB_INV_CALL = 0x28,		/* Function called out of sequence */
+	HAB_INV_CERTIFICATE = 0x21, /* Invalid certificate */
+	HAB_INV_COMMAND = 0x06,     /* Invalid command: command malformed */
+	HAB_INV_CSF = 0x11,			/* Invalid csf */
+	HAB_INV_DCD = 0x27,			/* Invalid dcd */
+	HAB_INV_INDEX = 0x0f,		/* Invalid index: access denied */
+	HAB_INV_IVT = 0x05,			/* Invalid ivt */
+	HAB_INV_KEY = 0x1d,			/* Invalid key */
+	HAB_INV_RETURN = 0x1e,		/* Failed callback function */
+	HAB_INV_SIGNATURE = 0x18,   /* Invalid signature */
+	HAB_INV_SIZE = 0x17,		/* Invalid data size */
+	HAB_MEM_FAIL = 0x2e,		/* Memory failure */
+	HAB_OVR_COUNT = 0x2b,		/* Expired poll count */
+	HAB_OVR_STORAGE = 0x2d,		/* Exhausted storage region */
+	HAB_UNS_ALGORITHM = 0x12,   /* Unsupported algorithm */
+	HAB_UNS_COMMAND = 0x03,		/* Unsupported command */
+	HAB_UNS_ENGINE = 0x0a,		/* Unsupported engine */
+	HAB_UNS_ITEM = 0x24,		/* Unsupported configuration item */
+	HAB_UNS_KEY = 0x1b,	        /* Unsupported key type/parameters */
+	HAB_UNS_PROTOCOL = 0x14,	/* Unsupported protocol */
+	HAB_UNS_STATE = 0x09,		/* Unsuitable state */
+	HAB_RSN_MAX
+};
+
+enum hab_context {
+	HAB_CTX_ANY = 0x00,			/* Match any context */
+	HAB_CTX_FAB = 0xff,		    /* Event logged in hab_fab_test() */
+	HAB_CTX_ENTRY = 0xe1,		/* Event logged in hab_rvt.entry() */
+	HAB_CTX_TARGET = 0x33,	    /* Event logged in hab_rvt.check_target() */
+	HAB_CTX_AUTHENTICATE = 0x0a,/* Logged in hab_rvt.authenticate_image() */
+	HAB_CTX_DCD = 0xdd,         /* Event logged in hab_rvt.run_dcd() */
+	HAB_CTX_CSF = 0xcf,         /* Event logged in hab_rvt.run_csf() */
+	HAB_CTX_COMMAND = 0xc0,     /* Event logged executing csf/dcd command */
+	HAB_CTX_AUT_DAT = 0xdb,		/* Authenticated data block */
+	HAB_CTX_ASSERT = 0xa0,		/* Event logged in hab_rvt.assert() */
+	HAB_CTX_EXIT = 0xee,		/* Event logged in hab_rvt.exit() */
+	HAB_CTX_MAX
+};
+
+enum hab_target {
+	HAB_TGT_MEMORY		= 0x0f,
+	HAB_TGT_PERIPHERAL	= 0xf0,
+	HAB_TGT_ANY		= 0x55,
+};
+
+struct imx_sec_config_fuse_t {
+	int bank;
+	int word;
+};
+
+#if defined(CONFIG_IMX_HAB)
+extern struct imx_sec_config_fuse_t const imx_sec_config_fuse;
+#endif
+
+/*Function prototype description*/
+typedef enum hab_status hab_rvt_report_event_t(enum hab_status, uint32_t,
+		uint8_t* , size_t*);
+typedef enum hab_status hab_rvt_report_status_t(enum hab_config *,
+		enum hab_state *);
+typedef enum hab_status hab_loader_callback_f_t(void**, size_t*, const void*);
+typedef enum hab_status hab_rvt_entry_t(void);
+typedef enum hab_status hab_rvt_exit_t(void);
+typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t,
+		void **, size_t *, hab_loader_callback_f_t);
+typedef enum hab_status hab_rvt_check_target_t(enum hab_target, const void *,
+					       size_t);
+typedef void hab_rvt_failsafe_t(void);
+typedef void hapi_clock_init_t(void);
+
+#define HAB_ENG_ANY		0x00   /* Select first compatible engine */
+#define HAB_ENG_SCC		0x03   /* Security controller */
+#define HAB_ENG_RTIC	0x05   /* Run-time integrity checker */
+#define HAB_ENG_SAHARA  0x06   /* Crypto accelerator */
+#define HAB_ENG_CSU		0x0a   /* Central Security Unit */
+#define HAB_ENG_SRTC	0x0c   /* Secure clock */
+#define HAB_ENG_DCP		0x1b   /* Data Co-Processor */
+#define HAB_ENG_CAAM	0x1d   /* CAAM */
+#define HAB_ENG_SNVS	0x1e   /* Secure Non-Volatile Storage */
+#define HAB_ENG_OCOTP	0x21   /* Fuse controller */
+#define HAB_ENG_DTCP	0x22   /* DTCP co-processor */
+#define HAB_ENG_ROM		0x36   /* Protected ROM area */
+#define HAB_ENG_HDCP	0x24   /* HDCP co-processor */
+#define HAB_ENG_RTL		0x77   /* RTL simulation engine */
+#define HAB_ENG_SW		0xff   /* Software engine */
+
+#ifdef CONFIG_ARM64
+#ifdef CONFIG_IMX8MQ
+#define HAB_RVT_BASE                   0x00000880
+#else
+#define HAB_RVT_BASE                   0x00000900
+#endif
+
+#define HAB_RVT_ENTRY			(*(ulong *)(HAB_RVT_BASE + 0x08))
+#define HAB_RVT_EXIT			(*(ulong *)(HAB_RVT_BASE + 0x10))
+#define HAB_RVT_CHECK_TARGET		(*(ulong *)(HAB_RVT_BASE + 0x18))
+#define HAB_RVT_AUTHENTICATE_IMAGE	(*(ulong *)(HAB_RVT_BASE + 0x20))
+#define HAB_RVT_REPORT_EVENT		(*(ulong *)(HAB_RVT_BASE + 0x40))
+#define HAB_RVT_REPORT_STATUS		(*(ulong *)(HAB_RVT_BASE + 0x48))
+#define HAB_RVT_FAILSAFE		(*(ulong *)(HAB_RVT_BASE + 0x50))
+#else
+
+#ifdef CONFIG_ROM_UNIFIED_SECTIONS
+#define HAB_RVT_BASE			0x00000100
+#else
+#define HAB_RVT_BASE_NEW		0x00000098
+#define HAB_RVT_BASE_OLD		0x00000094
+#define HAB_RVT_BASE ((is_mx6dqp()) ?					\
+			HAB_RVT_BASE_NEW :				\
+			(is_mx6dq() && (soc_rev() >= CHIP_REV_1_3)) ?	\
+			HAB_RVT_BASE_NEW :				\
+			(is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ?	\
+			HAB_RVT_BASE_NEW : HAB_RVT_BASE_OLD)
+#endif
+
+#define HAB_RVT_ENTRY			(*(uint32_t *)(HAB_RVT_BASE + 0x04))
+#define HAB_RVT_EXIT			(*(uint32_t *)(HAB_RVT_BASE + 0x08))
+#define HAB_RVT_CHECK_TARGET		(*(uint32_t *)(HAB_RVT_BASE + 0x0C))
+#define HAB_RVT_AUTHENTICATE_IMAGE	(*(uint32_t *)(HAB_RVT_BASE + 0x10))
+#define HAB_RVT_REPORT_EVENT		(*(uint32_t *)(HAB_RVT_BASE + 0x20))
+#define HAB_RVT_REPORT_STATUS		(*(uint32_t *)(HAB_RVT_BASE + 0x24))
+#define HAB_RVT_FAILSAFE		(*(uint32_t *)(HAB_RVT_BASE + 0x28))
+
+#endif /*CONFIG_ARM64*/
+
+#define HAB_CID_ROM 0 /**< ROM Caller ID */
+#define HAB_CID_UBOOT 1 /**< UBOOT Caller ID*/
+
+#define HAB_TAG_RVT          0xDD  /* ROM Vector Table */
+#define HAB_CMD_HDR          0xD4  /* CSF Header */
+#define HAB_CMD_WRT_DAT      0xCC  /* Write Data command tag */
+#define HAB_CMD_CHK_DAT      0xCF  /* Check Data command tag */
+#define HAB_CMD_SET          0xB1  /* Set command tag */
+#define HAB_PAR_MID          0x01  /* MID parameter value */
+
+#define IVT_SIZE			0x20
+#define CSF_PAD_SIZE			0x2000
+
+#define HAB_TAG_EVT		0xDB
+#define HAB_TAG_EVT_DEF		0x0C
+
+#define HAB_MAJ_VER		0x40
+#define HAB_MAJ_MASK		0xF0
+
+/* ----------- end of HAB API updates ------------*/
+
+int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,
+			       uint32_t ivt_offset);
+bool imx_hab_is_enabled(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/imx-nandbcb.h b/roms/u-boot/arch/arm/include/asm/mach-imx/imx-nandbcb.h
new file mode 100644
index 000000000..74c9031d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/imx-nandbcb.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _IMX_NAND_BCB_H_
+#define _IMX_NAND_BCB_H_
+
+#define FCB_FINGERPRINT		0x20424346      /* 'FCB' */
+#define FCB_VERSION_1		0x01000000
+#define FCB_FINGERPRINT_OFF	0x4		/* FCB fingerprint offset*/
+
+#define DBBT_FINGERPRINT	0x54424244	/* 'DBBT' */
+#define DBBT_VERSION_1		0x01000000
+#define DBBT_FINGERPRINT_OFF	0x4		/* DBBT fingerprint offset*/
+
+struct dbbt_block {
+	u32 checksum;	/* reserved on i.MX6 */
+	u32 fingerprint;
+	u32 version;
+	u32 numberbb;	/* reserved on i.MX6 */
+	u32 dbbtpages;
+};
+
+struct fcb_block {
+	u32 checksum;		/* First fingerprint in first byte */
+	u32 fingerprint;	/* 2nd fingerprint at byte 4 */
+	u32 version;		/* 3rd fingerprint at byte 8 */
+	u8 datasetup;
+	u8 datahold;
+	u8 addr_setup;
+	u8 dsample_time;
+
+	/* These are for application use only and not for ROM. */
+	u8 nandtiming;
+	u8 rea;
+	u8 rloh;
+	u8 rhoh;
+	u32 pagesize;		/* 2048 for 2K pages, 4096 for 4K pages */
+	u32 oob_pagesize;	/* 2112 for 2K pages, 4314 for 4K pages */
+	u32 sectors;		/* Number of 2K sections per block */
+	u32 nr_nand;		/* Total Number of NANDs - not used by ROM */
+	u32 nr_die;		/* Number of separate chips in this NAND */
+	u32 celltype;		/* MLC or SLC */
+	u32 ecc_type;		/* Type of ECC, can be one of BCH-0-20 */
+	u32 ecc_nr;		/* Number of bytes for Block0 - BCH */
+
+	/* Block size in bytes for all blocks other than Block0 - BCH */
+	u32 ecc_size;
+	u32 ecc_level;		/* Ecc level for Block 0 - BCH */
+	u32 meta_size;		/* Metadata size - BCH */
+	/* Number of blocks per page for ROM use - BCH */
+	u32 nr_blocks;
+	u32 ecc_type_sdk;	/* Type of ECC, can be one of BCH-0-20 */
+	u32 ecc_nr_sdk;		/* Number of bytes for Block0 - BCH */
+	/* Block size in bytes for all blocks other than Block0 - BCH */
+	u32 ecc_size_sdk;
+	u32 ecc_level_sdk;	/* Ecc level for Block 0 - BCH */
+	/* Number of blocks per page for SDK use - BCH */
+	u32 nr_blocks_sdk;
+	u32 meta_size_sdk;	/* Metadata size - BCH */
+	u32 erase_th;		/* To set into BCH_MODE register */
+
+	/*
+	 * 0: normal boot
+	 * 1: to load patch starting next to FCB
+	 */
+	u32 bootpatch;
+	u32 patch_size;	/* Size of patch in sectors */
+	u32 fw1_start;	/* Firmware image starts on this sector */
+	u32 fw2_start;	/* Secondary FW Image starting Sector */
+	u32 fw1_pages;	/* Number of sectors in firmware image */
+	u32 fw2_pages;	/* Number of sector in secondary FW image */
+	u32 dbbt_start; /* Page address where dbbt search area begins */
+
+	/*
+	 * Byte in page data that have manufacturer marked bad block marker,
+	 * this will be swapped with metadata[0] to complete page data.
+	 */
+	u32 bb_byte;
+
+	/*
+	 * For BCH ECC sizes other than 8 and 16 the bad block marker does not
+	 * start at 0th bit of bb_byte. This field is used to get to
+	 * the start bit of bad block marker byte with in bb_byte
+	 */
+	u32 bb_start_bit;
+
+	/*
+	 * FCB value that gives byte offset for
+	 * bad block marker on physical NAND page
+	 */
+	u32 phy_offset;
+	u32 bchtype;
+
+	u32 readlatency;
+	u32 predelay;
+	u32 cedelay;
+	u32 postdelay;
+	u32 cmdaddpause;
+	u32 datapause;
+	u32 tmspeed;
+	u32 busytimeout;
+
+	/* the flag to enable (1)/disable(0) bi swap */
+	u32 disbbm;
+
+	/* The swap position of main area in spare area */
+	u32 spare_offset;
+
+	/* Actual for iMX7 only */
+	u32 onfi_sync_enable;
+	u32 onfi_sync_speed;
+	u32 onfi_sync_nand_data;
+	u32 reserved2[6];
+	u32 disbbm_search;
+	u32 disbbm_search_limit;
+	u32 reserved3[15];
+	u32 read_retry_enable;
+	u32 reserved4[1];
+	u32 fill_to_1024[183];
+};
+
+#endif	/* _IMX_NAND_BCB_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/imximage.cfg b/roms/u-boot/arch/arm/include/asm/mach-imx/imximage.cfg
new file mode 100644
index 000000000..8fbc0620c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/imximage.cfg
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * i.MX image header offset values
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/*
+ * NOTE: This file must be kept in sync with tools/imximage.h because
+ *       tools/imximage.c can not cross-include headers from arch/arm/
+ *       and vice-versa.
+ */
+
+#ifndef __ASM_IMX_COMMON_IMXIMAGE_CFG__
+#define __ASM_IMX_COMMON_IMXIMAGE_CFG__
+
+/* Standard image header offset for NAND, SATA, SD, SPI flash. */
+#define FLASH_OFFSET_STANDARD	0x400
+/* Specific image header offset for booting from OneNAND. */
+#define FLASH_OFFSET_ONENAND	0x100
+/* Specific image header offset for booting from memory-mapped NOR. */
+#define FLASH_OFFSET_NOR	0x1000
+
+#endif  /* __ASM_IMX_COMMON_IMXIMAGE_CFG__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/iomux-v3.h b/roms/u-boot/arch/arm/include/asm/mach-imx/iomux-v3.h
new file mode 100644
index 000000000..1de709335
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/iomux-v3.h
@@ -0,0 +1,301 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Based on Linux i.MX iomux-v3.h file:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+#include <linux/types.h>
+
+/*
+ *	build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ *
+ * IOMUX/PAD Bit field definitions
+ *
+ * MUX_CTRL_OFS:	    0..11 (12)
+ * PAD_CTRL_OFS:	   12..23 (12)
+ * SEL_INPUT_OFS:	   24..35 (12)
+ * MUX_MODE + SION + LPSR: 36..41  (6)
+ * PAD_CTRL + NO_PAD_CTRL: 42..59 (18)
+ * SEL_INP:		   60..63  (4)
+*/
+
+typedef u64 iomux_v3_cfg_t;
+
+#define MUX_CTRL_OFS_SHIFT	0
+#define MUX_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
+#define MUX_PAD_CTRL_OFS_SHIFT	12
+#define MUX_PAD_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << \
+	MUX_PAD_CTRL_OFS_SHIFT)
+#define MUX_SEL_INPUT_OFS_SHIFT	24
+#define MUX_SEL_INPUT_OFS_MASK	((iomux_v3_cfg_t)0xfff << \
+	MUX_SEL_INPUT_OFS_SHIFT)
+
+#define MUX_MODE_SHIFT		36
+#define MUX_MODE_MASK		((iomux_v3_cfg_t)0x3f << MUX_MODE_SHIFT)
+#define MUX_PAD_CTRL_SHIFT	42
+#define MUX_PAD_CTRL_MASK	((iomux_v3_cfg_t)0x3ffff << MUX_PAD_CTRL_SHIFT)
+#define MUX_SEL_INPUT_SHIFT	60
+#define MUX_SEL_INPUT_MASK	((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
+
+#define MUX_MODE_SION		((iomux_v3_cfg_t)IOMUX_CONFIG_SION << \
+	MUX_MODE_SHIFT)
+#define MUX_PAD_CTRL(x)		((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+
+#define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs,	\
+		sel_input, pad_ctrl)					\
+	(((iomux_v3_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT)     |	\
+	((iomux_v3_cfg_t)(mux_mode)      << MUX_MODE_SHIFT)         |	\
+	((iomux_v3_cfg_t)(pad_ctrl_ofs)  << MUX_PAD_CTRL_OFS_SHIFT) |	\
+	((iomux_v3_cfg_t)(pad_ctrl)      << MUX_PAD_CTRL_SHIFT)     |	\
+	((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)|	\
+	((iomux_v3_cfg_t)(sel_input)     << MUX_SEL_INPUT_SHIFT))
+
+#define NEW_PAD_CTRL(cfg, pad)	(((cfg) & ~MUX_PAD_CTRL_MASK) | \
+					MUX_PAD_CTRL(pad))
+
+#define __NA_			0x000
+#define NO_MUX_I		0
+#define NO_PAD_I		0
+
+#define NO_PAD_CTRL		(1 << 17)
+
+#define IOMUX_CONFIG_LPSR       0x20
+#define MUX_MODE_LPSR           ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \
+				MUX_MODE_SHIFT)
+#ifdef CONFIG_IMX8M
+#define PAD_CTL_DSE0		(0x0 << 0)
+#define PAD_CTL_DSE1		(0x1 << 0)
+#define PAD_CTL_DSE2		(0x2 << 0)
+#define PAD_CTL_DSE3		(0x3 << 0)
+#define PAD_CTL_DSE4		(0x4 << 0)
+#define PAD_CTL_DSE5		(0x5 << 0)
+#define PAD_CTL_DSE6		(0x6 << 0)
+#define PAD_CTL_DSE7		(0x7 << 0)
+
+#define PAD_CTL_FSEL0		(0x0 << 3)
+#define PAD_CTL_FSEL1		(0x1 << 3)
+#define PAD_CTL_FSEL2		(0x2 << 3)
+#define PAD_CTL_FSEL3		(0x3 << 3)
+
+#define PAD_CTL_ODE		(0x1 << 5)
+#define PAD_CTL_PUE		(0x1 << 6)
+#define PAD_CTL_HYS		(0x1 << 7)
+#if defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
+#define PAD_CTL_PE		(0x1 << 8)
+#else
+#define PAD_CTL_LVTTL		(0x1 << 8)
+#endif
+
+#elif defined CONFIG_MX7
+
+#define IOMUX_LPSR_SEL_INPUT_OFS 0x70000
+
+#define PAD_CTL_DSE_1P8V_140OHM   (0x0<<0)
+#define PAD_CTL_DSE_1P8V_35OHM    (0x1<<0)
+#define PAD_CTL_DSE_1P8V_70OHM    (0x2<<0)
+#define PAD_CTL_DSE_1P8V_23OHM    (0x3<<0)
+
+#define PAD_CTL_DSE_3P3V_196OHM   (0x0<<0)
+#define PAD_CTL_DSE_3P3V_49OHM    (0x1<<0)
+#define PAD_CTL_DSE_3P3V_98OHM    (0x2<<0)
+#define PAD_CTL_DSE_3P3V_32OHM    (0x3<<0)
+
+#define PAD_CTL_SRE_FAST     (0 << 2)
+#define PAD_CTL_SRE_SLOW     (0x1 << 2)
+
+#define PAD_CTL_HYS       (0x1 << 3)
+#define PAD_CTL_PUE       (0x1 << 4)
+
+#define PAD_CTL_PUS_PD100KOHM  ((0x0 << 5) | PAD_CTL_PUE)
+#define PAD_CTL_PUS_PU5KOHM    ((0x1 << 5) | PAD_CTL_PUE)
+#define PAD_CTL_PUS_PU47KOHM   ((0x2 << 5) | PAD_CTL_PUE)
+#define PAD_CTL_PUS_PU100KOHM  ((0x3 << 5) | PAD_CTL_PUE)
+
+#else
+
+#ifdef CONFIG_MX6
+
+#define PAD_CTL_HYS		(1 << 16)
+
+#define PAD_CTL_PUS_100K_DOWN	(0 << 14 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_47K_UP	(1 << 14 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP	(2 << 14 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP	(3 << 14 | PAD_CTL_PUE)
+#define PAD_CTL_PUE		(1 << 13 | PAD_CTL_PKE)
+#define PAD_CTL_PKE		(1 << 12)
+
+#define PAD_CTL_ODE		(1 << 11)
+
+#if defined(CONFIG_MX6SL)
+#define PAD_CTL_SPEED_LOW	(1 << 6)
+#else
+#define PAD_CTL_SPEED_LOW	(0 << 6)
+#endif
+#define PAD_CTL_SPEED_MED	(2 << 6)
+#define PAD_CTL_SPEED_HIGH	(3 << 6)
+
+#define PAD_CTL_DSE_DISABLE	(0 << 3)
+#define PAD_CTL_DSE_240ohm	(1 << 3)
+#define PAD_CTL_DSE_120ohm	(2 << 3)
+#define PAD_CTL_DSE_80ohm	(3 << 3)
+#define PAD_CTL_DSE_60ohm	(4 << 3)
+#define PAD_CTL_DSE_48ohm	(5 << 3)
+#define PAD_CTL_DSE_40ohm	(6 << 3)
+#define PAD_CTL_DSE_34ohm	(7 << 3)
+
+#define PAD_CTL_DSE_260ohm	(1 << 3)
+#define PAD_CTL_DSE_130ohm	(2 << 3)
+#define PAD_CTL_DSE_88ohm	(3 << 3)
+#define PAD_CTL_DSE_65ohm	(4 << 3)
+#define PAD_CTL_DSE_52ohm	(5 << 3)
+#define PAD_CTL_DSE_43ohm	(6 << 3)
+#define PAD_CTL_DSE_37ohm	(7 << 3)
+
+/* i.MX6SL/SLL */
+#define PAD_CTL_LVE		(1 << 1)
+#define PAD_CTL_LVE_BIT		(1 << 22)
+
+/* i.MX6SLL */
+#define PAD_CTL_IPD_BIT		(1 << 27)
+
+#elif defined(CONFIG_VF610)
+
+#define PAD_MUX_MODE_SHIFT	20
+
+#define PAD_CTL_INPUT_DIFFERENTIAL (1 << 16)
+
+#define PAD_CTL_SPEED_MED	(1 << 12)
+#define PAD_CTL_SPEED_HIGH	(3 << 12)
+
+#define PAD_CTL_SRE		(1 << 11)
+
+#define PAD_CTL_ODE		(1 << 10)
+
+#define PAD_CTL_DSE_150ohm	(1 << 6)
+#define PAD_CTL_DSE_75ohm	(2 << 6)
+#define PAD_CTL_DSE_50ohm	(3 << 6)
+#define PAD_CTL_DSE_37ohm	(4 << 6)
+#define PAD_CTL_DSE_30ohm	(5 << 6)
+#define PAD_CTL_DSE_25ohm	(6 << 6)
+#define PAD_CTL_DSE_20ohm	(7 << 6)
+
+#define PAD_CTL_PUS_47K_UP	(1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP	(2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP	(3 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PKE		(1 << 3)
+#define PAD_CTL_PUE		(1 << 2 | PAD_CTL_PKE)
+
+#define PAD_CTL_OBE_IBE_ENABLE	(3 << 0)
+#define PAD_CTL_OBE_ENABLE	(1 << 1)
+#define PAD_CTL_IBE_ENABLE	(1 << 0)
+
+#else
+
+#define PAD_CTL_DVS		(1 << 13)
+#define PAD_CTL_INPUT_DDR	(1 << 9)
+#define PAD_CTL_HYS		(1 << 8)
+
+#define PAD_CTL_PKE		(1 << 7)
+#define PAD_CTL_PUE		(1 << 6 | PAD_CTL_PKE)
+#define PAD_CTL_PUS_100K_DOWN	(0 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_47K_UP	(1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP	(2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP	(3 << 4 | PAD_CTL_PUE)
+
+#define PAD_CTL_ODE		(1 << 3)
+
+#define PAD_CTL_DSE_LOW		(0 << 1)
+#define PAD_CTL_DSE_MED		(1 << 1)
+#define PAD_CTL_DSE_HIGH	(2 << 1)
+#define PAD_CTL_DSE_MAX		(3 << 1)
+
+#endif
+
+#define PAD_CTL_SRE_SLOW	(0 << 0)
+#define PAD_CTL_SRE_FAST	(1 << 0)
+
+#endif
+
+#define IOMUX_CONFIG_SION	0x10
+
+#define GPIO_PIN_MASK		0x1f
+#define GPIO_PORT_SHIFT		5
+#define GPIO_PORT_MASK		(0x7 << GPIO_PORT_SHIFT)
+#define GPIO_PORTA		(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB		(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC		(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD		(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE		(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF		(5 << GPIO_PORT_SHIFT)
+
+void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
+void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
+				     unsigned count);
+/*
+* Set bits for general purpose registers
+*/
+void imx_iomux_set_gpr_register(int group, int start_bit,
+					 int num_bits, int value);
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+				unsigned int direction);
+void imx_iomux_gpio_get_function(unsigned int gpio,
+				u32 *gpio_state);
+#endif
+
+/* macros for declaring and using pinmux array */
+#if defined(CONFIG_MX6QDL)
+#define IOMUX_PADS(x) (MX6Q_##x), (MX6DL_##x)
+#define SETUP_IOMUX_PAD(def)					\
+if (is_mx6dq() || is_mx6dqp()) {				\
+	imx_iomux_v3_setup_pad(MX6Q_##def);			\
+} else {							\
+	imx_iomux_v3_setup_pad(MX6DL_##def);			\
+}
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)/2)
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define IOMUX_PADS(x) MX6Q_##x
+#define SETUP_IOMUX_PAD(def)					\
+	imx_iomux_v3_setup_pad(MX6Q_##def);
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#elif defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+#define IOMUX_PADS(x) MX6_##x
+#define SETUP_IOMUX_PAD(def)					\
+	imx_iomux_v3_setup_pad(MX6_##def);
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#else
+#define IOMUX_PADS(x) MX6DL_##x
+#define SETUP_IOMUX_PAD(def)					\
+	imx_iomux_v3_setup_pad(MX6DL_##def);
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#endif
+
+#endif	/* __MACH_IOMUX_V3_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/module_fuse.h b/roms/u-boot/arch/arm/include/asm/mach-imx/module_fuse.h
new file mode 100644
index 000000000..a46fc3f1f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/module_fuse.h
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __MODULE_FUSE_H__
+#define __MODULE_FUSE_H__
+
+enum fuse_module_type {
+	MODULE_TSC,
+	MODULE_ADC1,
+	MODULE_ADC2,
+	MODULE_SIM1,
+	MODULE_SIM2,
+	MODULE_FLEXCAN1,
+	MODULE_FLEXCAN2,
+	MODULE_SPDIF,
+	MODULE_EIM,
+	MODULE_SD1,
+	MODULE_SD2,
+	MODULE_SD3,
+	MODULE_SD4,
+	MODULE_QSPI1,
+	MODULE_QSPI2,
+	MODULE_GPMI,
+	MODULE_APBHDMA,
+	MODULE_LCDIF,
+	MODULE_PXP,
+	MODULE_CSI,
+	MODULE_ENET1,
+	MODULE_ENET2,
+	MODULE_CAAM,
+	MODULE_USB_OTG1,
+	MODULE_USB_OTG2,
+	MODULE_SAI2,
+	MODULE_SAI3,
+	MODULE_BEE,
+	MODULE_UART1,
+	MODULE_UART2,
+	MODULE_UART3,
+	MODULE_UART4,
+	MODULE_UART5,
+	MODULE_UART6,
+	MODULE_UART7,
+	MODULE_UART8,
+	MODULE_PWM5,
+	MODULE_PWM6,
+	MODULE_PWM7,
+	MODULE_PWM8,
+	MODULE_ECSPI1,
+	MODULE_ECSPI2,
+	MODULE_ECSPI3,
+	MODULE_ECSPI4,
+	MODULE_ECSPI5,
+	MODULE_I2C1,
+	MODULE_I2C2,
+	MODULE_I2C3,
+	MODULE_I2C4,
+	MODULE_GPT1,
+	MODULE_GPT2,
+	MODULE_EPIT1,
+	MODULE_EPIT2,
+	MODULE_EPDC,
+	MODULE_ESAI,
+	MODULE_DCP,
+	MODULE_DCP_CRYPTO,
+};
+
+struct fuse_entry_desc {
+	enum fuse_module_type module;
+	const char *node_path;
+	u32 fuse_word_offset;
+	u32 fuse_bit_offset;
+	u32 status;
+};
+
+#if !CONFIG_IS_ENABLED(IMX_MODULE_FUSE)
+static inline u32 check_module_fused(enum fuse_module_type module)
+{
+	return 0;
+};
+
+static inline u32 esdhc_fused(ulong base_addr)
+{
+	return 0;
+};
+
+static inline u32 ecspi_fused(ulong base_addr)
+{
+	return 0;
+};
+
+static inline u32 uart_fused(ulong base_addr)
+{
+	return 0;
+};
+
+static inline u32 usb_fused(ulong base_addr)
+{
+	return 0;
+};
+
+static inline u32 qspi_fused(ulong base_addr)
+{
+	return 0;
+};
+
+static inline u32 i2c_fused(ulong base_addr)
+{
+	return 0;
+};
+
+static inline u32 enet_fused(ulong base_addr)
+{
+	return 0;
+};
+#else
+u32 check_module_fused(enum fuse_module_type module);
+u32 esdhc_fused(ulong base_addr);
+u32 ecspi_fused(ulong base_addr);
+u32 uart_fused(ulong base_addr);
+u32 usb_fused(ulong base_addr);
+u32 qspi_fused(ulong base_addr);
+u32 i2c_fused(ulong base_addr);
+u32 enet_fused(ulong base_addr);
+#endif
+#endif /* __MODULE_FUSE_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/mx5_video.h b/roms/u-boot/arch/arm/include/asm/mach-imx/mx5_video.h
new file mode 100644
index 000000000..dc6aa00c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/mx5_video.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012
+ * Anatolij Gustschin, DENX Software Engineering, <agust@denx.de>
+ */
+#ifndef __MX5_VIDEO_H
+#define __MX5_VIDEO_H
+
+#ifdef CONFIG_VIDEO
+void lcd_enable(void);
+void setup_iomux_lcd(void);
+#else
+static inline void lcd_enable(void) { }
+static inline void setup_iomux_lcd(void) { }
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/mxc_i2c.h b/roms/u-boot/arch/arm/include/asm/mach-imx/mxc_i2c.h
new file mode 100644
index 000000000..e8b330f33
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/mxc_i2c.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+#ifndef __ASM_ARCH_MXC_MXC_I2C_H__
+#define __ASM_ARCH_MXC_MXC_I2C_H__
+#include <asm-generic/gpio.h>
+#include <asm/mach-imx/iomux-v3.h>
+#if CONFIG_IS_ENABLED(CLK)
+#include <clk.h>
+#endif
+
+struct i2c_pin_ctrl {
+	iomux_v3_cfg_t i2c_mode;
+	iomux_v3_cfg_t gpio_mode;
+	unsigned char gp;
+	unsigned char spare;
+};
+
+struct i2c_pads_info {
+	struct i2c_pin_ctrl scl;
+	struct i2c_pin_ctrl sda;
+};
+
+/*
+ * Information about i2c controller
+ * struct mxc_i2c_bus - information about the i2c[x] bus
+ * @index: i2c bus index
+ * @base: Address of I2C bus controller
+ * @driver_data: Flags for different platforms, such as I2C_QUIRK_FLAG.
+ * @speed: Speed of I2C bus
+ * @pads_info: pinctrl info for this i2c bus, will be used when pinctrl is ok.
+ * The following two is only to be compatible with non-DM part.
+ * @idle_bus_fn: function to force bus idle
+ * @idle_bus_data: parameter for idle_bus_fun
+ * For DM:
+ * bus: The device structure for i2c bus controller
+ * scl-gpio: specify the gpio related to SCL pin
+ * sda-gpio: specify the gpio related to SDA pin
+ */
+struct mxc_i2c_bus {
+	/*
+	 * board file can use this index to locate which i2c_pads_info is for
+	 * i2c_idle_bus. When pinmux is implement, this entry can be
+	 * discarded. Here we do not use dev_seq(dev), because we do not want to
+	 * export device to board file.
+	 */
+	int index;
+	ulong base;
+	ulong driver_data;
+	int speed;
+	struct i2c_pads_info *pads_info;
+#if CONFIG_IS_ENABLED(CLK)
+	struct clk per_clk;
+#endif
+#if !CONFIG_IS_ENABLED(DM_I2C)
+	int (*idle_bus_fn)(void *p);
+	void *idle_bus_data;
+#else
+	struct udevice *bus;
+	/* Use gpio to force bus idle when bus state is abnormal */
+	struct gpio_desc scl_gpio;
+	struct gpio_desc sda_gpio;
+#endif
+};
+
+#if defined(CONFIG_MX6QDL)
+#define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
+	struct i2c_pads_info mx6q_##name = {		\
+		.scl = {				\
+			.i2c_mode = MX6Q_##scl_i2c,	\
+			.gpio_mode = MX6Q_##scl_gpio,	\
+			.gp = scl_gp,			\
+		},					\
+		.sda = {				\
+			.i2c_mode = MX6Q_##sda_i2c,	\
+			.gpio_mode = MX6Q_##sda_gpio,	\
+			.gp = sda_gp,			\
+		}					\
+	};						\
+	struct i2c_pads_info mx6s_##name = {		\
+		.scl = {				\
+			.i2c_mode = MX6DL_##scl_i2c,	\
+			.gpio_mode = MX6DL_##scl_gpio,	\
+			.gp = scl_gp,			\
+		},					\
+		.sda = {				\
+			.i2c_mode = MX6DL_##sda_i2c,	\
+			.gpio_mode = MX6DL_##sda_gpio,	\
+			.gp = sda_gp,			\
+		}					\
+	};
+
+
+#define I2C_PADS_INFO(name)	\
+	(is_mx6dq() || is_mx6dqp()) ? &mx6q_##name : &mx6s_##name
+#endif
+
+int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
+	      struct i2c_pads_info *p);
+void bus_i2c_init(int index, int speed, int slave_addr,
+		int (*idle_bus_fn)(void *p), void *p);
+int force_idle_bus(void *priv);
+int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/rdc-sema.h b/roms/u-boot/arch/arm/include/asm/mach-imx/rdc-sema.h
new file mode 100644
index 000000000..70d6a76a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/rdc-sema.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __RDC_SEMA_H__
+#define __RDC_SEMA_H__
+
+/*
+ * rdc_peri_cfg_t and rdc_ma_cft_t use the same layout.
+ *
+ *   [ 23 22 | 21 20 | 19 18 | 17 16 ] | [ 15 - 8 ] | [ 7 - 0 ]
+ *      d3      d2      d1       d0    | master id  |  peri id
+ *   d[x] means domain[x], x can be [3 - 0].
+ */
+typedef u32 rdc_peri_cfg_t;
+typedef u32 rdc_ma_cfg_t;
+
+#define RDC_PERI_SHIFT		0
+#define RDC_PERI_MASK		0xFF
+
+#define RDC_DOMAIN_SHIFT_BASE	16
+#define RDC_DOMAIN_MASK		0xFF0000
+#define RDC_DOMAIN_SHIFT(x)	(RDC_DOMAIN_SHIFT_BASE + ((x << 1)))
+#define RDC_DOMAIN(x)		((rdc_peri_cfg_t)(0x3 << RDC_DOMAIN_SHIFT(x)))
+
+#define RDC_MASTER_SHIFT	8
+#define RDC_MASTER_MASK		0xFF00
+#define RDC_MASTER_CFG(master_id, domain_id) (rdc_ma_cfg_t)((master_id << 8) | \
+					(domain_id << RDC_DOMAIN_SHIFT_BASE))
+
+/* The Following macro definitions are common to i.MX6SX and i.MX7D */
+#define SEMA_GATES_NUM		64
+
+#define RDC_MDA_DID_SHIFT	0
+#define RDC_MDA_DID_MASK	(0x3 << RDC_MDA_DID_SHIFT)
+#define RDC_MDA_LCK_SHIFT	31
+#define RDC_MDA_LCK_MASK	(0x1 << RDC_MDA_LCK_SHIFT)
+
+#define RDC_PDAP_DW_SHIFT(domain)	((domain) << 1)
+#define RDC_PDAP_DR_SHIFT(domain)	(1 + RDC_PDAP_DW_SHIFT(domain))
+#define RDC_PDAP_DW_MASK(domain)	(1 << RDC_PDAP_DW_SHIFT(domain))
+#define RDC_PDAP_DR_MASK(domain)	(1 << RDC_PDAP_DR_SHIFT(domain))
+#define RDC_PDAP_DRW_MASK(domain)	(RDC_PDAP_DW_MASK(domain) | \
+					 RDC_PDAP_DR_MASK(domain))
+
+#define RDC_PDAP_SREQ_SHIFT	30
+#define RDC_PDAP_SREQ_MASK	(0x1 << RDC_PDAP_SREQ_SHIFT)
+#define RDC_PDAP_LCK_SHIFT	31
+#define RDC_PDAP_LCK_MASK	(0x1 << RDC_PDAP_LCK_SHIFT)
+
+#define RDC_MRSA_SADR_SHIFT	7
+#define RDC_MRSA_SADR_MASK	(0x1ffffff << RDC_MRSA_SADR_SHIFT)
+
+#define RDC_MREA_EADR_SHIFT	7
+#define RDC_MREA_EADR_MASK	(0x1ffffff << RDC_MREA_EADR_SHIFT)
+
+#define RDC_MRC_DW_SHIFT(domain)	(domain)
+#define RDC_MRC_DR_SHIFT(domain)	(1 + RDC_MRC_DW_SHIFT(domain))
+#define RDC_MRC_DW_MASK(domain)		(1 << RDC_MRC_DW_SHIFT(domain))
+#define RDC_MRC_DR_MASK(domain)		(1 << RDC_MRC_DR_SHIFT(domain))
+#define RDC_MRC_DRW_MASK(domain)	(RDC_MRC_DW_MASK(domain) | \
+					 RDC_MRC_DR_MASK(domain))
+#define RDC_MRC_ENA_SHIFT	30
+#define RDC_MRC_ENA_MASK	(0x1 << RDC_MRC_ENA_SHIFT)
+#define RDC_MRC_LCK_SHIFT	31
+#define RDC_MRC_LCK_MASK	(0x1 << RDC_MRC_LCK_SHIFT)
+
+#define RDC_MRVS_VDID_SHIFT	0
+#define RDC_MRVS_VDID_MASK	(0x3 << RDC_MRVS_VDID_SHIFT)
+#define RDC_MRVS_AD_SHIFT	4
+#define RDC_MRVS_AD_MASK	(0x1 << RDC_MRVS_AD_SHIFT)
+#define RDC_MRVS_VADDR_SHIFT	5
+#define RDC_MRVS_VADDR_MASK	(0x7ffffff << RDC_MRVS_VADDR_SHIFT)
+
+#define RDC_SEMA_GATE_GTFSM_SHIFT	0
+#define RDC_SEMA_GATE_GTFSM_MASK	(0xf << RDC_SEMA_GATE_GTFSM_SHIFT)
+#define RDC_SEMA_GATE_LDOM_SHIFT	5
+#define RDC_SEMA_GATE_LDOM_MASK		(0x3 << RDC_SEMA_GATE_LDOM_SHIFT)
+
+#define RDC_SEMA_RSTGT_RSTGDP_SHIFT	0
+#define RDC_SEMA_RSTGT_RSTGDP_MASK	(0xff << RDC_SEMA_RSTGT_RSTGDP_SHIFT)
+#define RDC_SEMA_RSTGT_RSTGSM_SHIFT	2
+#define RDC_SEMA_RSTGT_RSTGSM_MASK	(0x3 << RDC_SEMA_RSTGT_RSTGSM_SHIFT)
+#define RDC_SEMA_RSTGT_RSTGMS_SHIFT	4
+#define RDC_SEMA_RSTGT_RSTGMS_MASK	(0xf << RDC_SEMA_RSTGT_RSTGMS_SHIFT)
+#define RDC_SEMA_RSTGT_RSTGTN_SHIFT	8
+#define RDC_SEMA_RSTGT_RSTGTN_MASK	(0xff << RDC_SEMA_RSTGT_RSTGTN_SHIFT)
+
+int imx_rdc_check_permission(int per_id, int dom_id);
+int imx_rdc_sema_lock(int per_id);
+int imx_rdc_sema_unlock(int per_id);
+int imx_rdc_setup_peri(rdc_peri_cfg_t p);
+int imx_rdc_setup_peripherals(rdc_peri_cfg_t const *peripherals_list,
+			      unsigned count);
+int imx_rdc_setup_ma(rdc_ma_cfg_t p);
+int imx_rdc_setup_masters(rdc_ma_cfg_t const *masters_list, unsigned count);
+
+#endif	/* __RDC_SEMA_H__*/
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/regs-apbh.h b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-apbh.h
new file mode 100644
index 000000000..94c330c7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-apbh.h
@@ -0,0 +1,587 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 APBH Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2020 NXP
+ */
+
+#ifndef __REGS_APBH_H__
+#define __REGS_APBH_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+
+#if defined(CONFIG_MX23)
+struct mxs_apbh_regs {
+	mxs_reg_32(hw_apbh_ctrl0)
+	mxs_reg_32(hw_apbh_ctrl1)
+	mxs_reg_32(hw_apbh_ctrl2)
+	mxs_reg_32(hw_apbh_channel_ctrl)
+
+	union {
+	struct {
+		mxs_reg_32(hw_apbh_ch_curcmdar)
+		mxs_reg_32(hw_apbh_ch_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch_cmd)
+		mxs_reg_32(hw_apbh_ch_bar)
+		mxs_reg_32(hw_apbh_ch_sema)
+		mxs_reg_32(hw_apbh_ch_debug1)
+		mxs_reg_32(hw_apbh_ch_debug2)
+	} ch[8];
+	struct {
+		mxs_reg_32(hw_apbh_ch0_curcmdar)
+		mxs_reg_32(hw_apbh_ch0_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch0_cmd)
+		mxs_reg_32(hw_apbh_ch0_bar)
+		mxs_reg_32(hw_apbh_ch0_sema)
+		mxs_reg_32(hw_apbh_ch0_debug1)
+		mxs_reg_32(hw_apbh_ch0_debug2)
+		mxs_reg_32(hw_apbh_ch1_curcmdar)
+		mxs_reg_32(hw_apbh_ch1_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch1_cmd)
+		mxs_reg_32(hw_apbh_ch1_bar)
+		mxs_reg_32(hw_apbh_ch1_sema)
+		mxs_reg_32(hw_apbh_ch1_debug1)
+		mxs_reg_32(hw_apbh_ch1_debug2)
+		mxs_reg_32(hw_apbh_ch2_curcmdar)
+		mxs_reg_32(hw_apbh_ch2_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch2_cmd)
+		mxs_reg_32(hw_apbh_ch2_bar)
+		mxs_reg_32(hw_apbh_ch2_sema)
+		mxs_reg_32(hw_apbh_ch2_debug1)
+		mxs_reg_32(hw_apbh_ch2_debug2)
+		mxs_reg_32(hw_apbh_ch3_curcmdar)
+		mxs_reg_32(hw_apbh_ch3_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch3_cmd)
+		mxs_reg_32(hw_apbh_ch3_bar)
+		mxs_reg_32(hw_apbh_ch3_sema)
+		mxs_reg_32(hw_apbh_ch3_debug1)
+		mxs_reg_32(hw_apbh_ch3_debug2)
+		mxs_reg_32(hw_apbh_ch4_curcmdar)
+		mxs_reg_32(hw_apbh_ch4_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch4_cmd)
+		mxs_reg_32(hw_apbh_ch4_bar)
+		mxs_reg_32(hw_apbh_ch4_sema)
+		mxs_reg_32(hw_apbh_ch4_debug1)
+		mxs_reg_32(hw_apbh_ch4_debug2)
+		mxs_reg_32(hw_apbh_ch5_curcmdar)
+		mxs_reg_32(hw_apbh_ch5_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch5_cmd)
+		mxs_reg_32(hw_apbh_ch5_bar)
+		mxs_reg_32(hw_apbh_ch5_sema)
+		mxs_reg_32(hw_apbh_ch5_debug1)
+		mxs_reg_32(hw_apbh_ch5_debug2)
+		mxs_reg_32(hw_apbh_ch6_curcmdar)
+		mxs_reg_32(hw_apbh_ch6_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch6_cmd)
+		mxs_reg_32(hw_apbh_ch6_bar)
+		mxs_reg_32(hw_apbh_ch6_sema)
+		mxs_reg_32(hw_apbh_ch6_debug1)
+		mxs_reg_32(hw_apbh_ch6_debug2)
+		mxs_reg_32(hw_apbh_ch7_curcmdar)
+		mxs_reg_32(hw_apbh_ch7_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch7_cmd)
+		mxs_reg_32(hw_apbh_ch7_bar)
+		mxs_reg_32(hw_apbh_ch7_sema)
+		mxs_reg_32(hw_apbh_ch7_debug1)
+		mxs_reg_32(hw_apbh_ch7_debug2)
+	};
+	};
+	mxs_reg_32(hw_apbh_version)
+};
+
+#else
+struct mxs_apbh_regs {
+	mxs_reg_32(hw_apbh_ctrl0)
+	mxs_reg_32(hw_apbh_ctrl1)
+	mxs_reg_32(hw_apbh_ctrl2)
+	mxs_reg_32(hw_apbh_channel_ctrl)
+	mxs_reg_32(hw_apbh_devsel)
+	mxs_reg_32(hw_apbh_dma_burst_size)
+	mxs_reg_32(hw_apbh_debug)
+
+	uint32_t	reserved[36];
+
+	union {
+	struct {
+		mxs_reg_32(hw_apbh_ch_curcmdar)
+		mxs_reg_32(hw_apbh_ch_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch_cmd)
+		mxs_reg_32(hw_apbh_ch_bar)
+		mxs_reg_32(hw_apbh_ch_sema)
+		mxs_reg_32(hw_apbh_ch_debug1)
+		mxs_reg_32(hw_apbh_ch_debug2)
+	} ch[16];
+	struct {
+		mxs_reg_32(hw_apbh_ch0_curcmdar)
+		mxs_reg_32(hw_apbh_ch0_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch0_cmd)
+		mxs_reg_32(hw_apbh_ch0_bar)
+		mxs_reg_32(hw_apbh_ch0_sema)
+		mxs_reg_32(hw_apbh_ch0_debug1)
+		mxs_reg_32(hw_apbh_ch0_debug2)
+		mxs_reg_32(hw_apbh_ch1_curcmdar)
+		mxs_reg_32(hw_apbh_ch1_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch1_cmd)
+		mxs_reg_32(hw_apbh_ch1_bar)
+		mxs_reg_32(hw_apbh_ch1_sema)
+		mxs_reg_32(hw_apbh_ch1_debug1)
+		mxs_reg_32(hw_apbh_ch1_debug2)
+		mxs_reg_32(hw_apbh_ch2_curcmdar)
+		mxs_reg_32(hw_apbh_ch2_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch2_cmd)
+		mxs_reg_32(hw_apbh_ch2_bar)
+		mxs_reg_32(hw_apbh_ch2_sema)
+		mxs_reg_32(hw_apbh_ch2_debug1)
+		mxs_reg_32(hw_apbh_ch2_debug2)
+		mxs_reg_32(hw_apbh_ch3_curcmdar)
+		mxs_reg_32(hw_apbh_ch3_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch3_cmd)
+		mxs_reg_32(hw_apbh_ch3_bar)
+		mxs_reg_32(hw_apbh_ch3_sema)
+		mxs_reg_32(hw_apbh_ch3_debug1)
+		mxs_reg_32(hw_apbh_ch3_debug2)
+		mxs_reg_32(hw_apbh_ch4_curcmdar)
+		mxs_reg_32(hw_apbh_ch4_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch4_cmd)
+		mxs_reg_32(hw_apbh_ch4_bar)
+		mxs_reg_32(hw_apbh_ch4_sema)
+		mxs_reg_32(hw_apbh_ch4_debug1)
+		mxs_reg_32(hw_apbh_ch4_debug2)
+		mxs_reg_32(hw_apbh_ch5_curcmdar)
+		mxs_reg_32(hw_apbh_ch5_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch5_cmd)
+		mxs_reg_32(hw_apbh_ch5_bar)
+		mxs_reg_32(hw_apbh_ch5_sema)
+		mxs_reg_32(hw_apbh_ch5_debug1)
+		mxs_reg_32(hw_apbh_ch5_debug2)
+		mxs_reg_32(hw_apbh_ch6_curcmdar)
+		mxs_reg_32(hw_apbh_ch6_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch6_cmd)
+		mxs_reg_32(hw_apbh_ch6_bar)
+		mxs_reg_32(hw_apbh_ch6_sema)
+		mxs_reg_32(hw_apbh_ch6_debug1)
+		mxs_reg_32(hw_apbh_ch6_debug2)
+		mxs_reg_32(hw_apbh_ch7_curcmdar)
+		mxs_reg_32(hw_apbh_ch7_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch7_cmd)
+		mxs_reg_32(hw_apbh_ch7_bar)
+		mxs_reg_32(hw_apbh_ch7_sema)
+		mxs_reg_32(hw_apbh_ch7_debug1)
+		mxs_reg_32(hw_apbh_ch7_debug2)
+		mxs_reg_32(hw_apbh_ch8_curcmdar)
+		mxs_reg_32(hw_apbh_ch8_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch8_cmd)
+		mxs_reg_32(hw_apbh_ch8_bar)
+		mxs_reg_32(hw_apbh_ch8_sema)
+		mxs_reg_32(hw_apbh_ch8_debug1)
+		mxs_reg_32(hw_apbh_ch8_debug2)
+		mxs_reg_32(hw_apbh_ch9_curcmdar)
+		mxs_reg_32(hw_apbh_ch9_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch9_cmd)
+		mxs_reg_32(hw_apbh_ch9_bar)
+		mxs_reg_32(hw_apbh_ch9_sema)
+		mxs_reg_32(hw_apbh_ch9_debug1)
+		mxs_reg_32(hw_apbh_ch9_debug2)
+		mxs_reg_32(hw_apbh_ch10_curcmdar)
+		mxs_reg_32(hw_apbh_ch10_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch10_cmd)
+		mxs_reg_32(hw_apbh_ch10_bar)
+		mxs_reg_32(hw_apbh_ch10_sema)
+		mxs_reg_32(hw_apbh_ch10_debug1)
+		mxs_reg_32(hw_apbh_ch10_debug2)
+		mxs_reg_32(hw_apbh_ch11_curcmdar)
+		mxs_reg_32(hw_apbh_ch11_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch11_cmd)
+		mxs_reg_32(hw_apbh_ch11_bar)
+		mxs_reg_32(hw_apbh_ch11_sema)
+		mxs_reg_32(hw_apbh_ch11_debug1)
+		mxs_reg_32(hw_apbh_ch11_debug2)
+		mxs_reg_32(hw_apbh_ch12_curcmdar)
+		mxs_reg_32(hw_apbh_ch12_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch12_cmd)
+		mxs_reg_32(hw_apbh_ch12_bar)
+		mxs_reg_32(hw_apbh_ch12_sema)
+		mxs_reg_32(hw_apbh_ch12_debug1)
+		mxs_reg_32(hw_apbh_ch12_debug2)
+		mxs_reg_32(hw_apbh_ch13_curcmdar)
+		mxs_reg_32(hw_apbh_ch13_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch13_cmd)
+		mxs_reg_32(hw_apbh_ch13_bar)
+		mxs_reg_32(hw_apbh_ch13_sema)
+		mxs_reg_32(hw_apbh_ch13_debug1)
+		mxs_reg_32(hw_apbh_ch13_debug2)
+		mxs_reg_32(hw_apbh_ch14_curcmdar)
+		mxs_reg_32(hw_apbh_ch14_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch14_cmd)
+		mxs_reg_32(hw_apbh_ch14_bar)
+		mxs_reg_32(hw_apbh_ch14_sema)
+		mxs_reg_32(hw_apbh_ch14_debug1)
+		mxs_reg_32(hw_apbh_ch14_debug2)
+		mxs_reg_32(hw_apbh_ch15_curcmdar)
+		mxs_reg_32(hw_apbh_ch15_nxtcmdar)
+		mxs_reg_32(hw_apbh_ch15_cmd)
+		mxs_reg_32(hw_apbh_ch15_bar)
+		mxs_reg_32(hw_apbh_ch15_sema)
+		mxs_reg_32(hw_apbh_ch15_debug1)
+		mxs_reg_32(hw_apbh_ch15_debug2)
+	};
+	};
+	mxs_reg_32(hw_apbh_version)
+};
+#endif
+
+#endif
+
+#define	APBH_CTRL0_SFTRST				(1 << 31)
+#define	APBH_CTRL0_CLKGATE				(1 << 30)
+#define	APBH_CTRL0_AHB_BURST8_EN			(1 << 29)
+#define	APBH_CTRL0_APB_BURST_EN				(1 << 28)
+#if defined(CONFIG_MX23)
+#define	APBH_CTRL0_RSVD0_MASK				(0xf << 24)
+#define	APBH_CTRL0_RSVD0_OFFSET				24
+#define	APBH_CTRL0_RESET_CHANNEL_MASK			(0xff << 16)
+#define	APBH_CTRL0_RESET_CHANNEL_OFFSET			16
+#define	APBH_CTRL0_CLKGATE_CHANNEL_MASK			(0xff << 8)
+#define	APBH_CTRL0_CLKGATE_CHANNEL_OFFSET		8
+#define	APBH_CTRL0_CLKGATE_CHANNEL_SSP0			0x02
+#define	APBH_CTRL0_CLKGATE_CHANNEL_SSP1			0x04
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND0		0x10
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND1		0x20
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND2		0x40
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND3		0x80
+#elif defined(CONFIG_MX28)
+#define	APBH_CTRL0_RSVD0_MASK				(0xfff << 16)
+#define	APBH_CTRL0_RSVD0_OFFSET				16
+#define	APBH_CTRL0_CLKGATE_CHANNEL_MASK			0xffff
+#define	APBH_CTRL0_CLKGATE_CHANNEL_OFFSET		0
+#define	APBH_CTRL0_CLKGATE_CHANNEL_SSP0			0x0001
+#define	APBH_CTRL0_CLKGATE_CHANNEL_SSP1			0x0002
+#define	APBH_CTRL0_CLKGATE_CHANNEL_SSP2			0x0004
+#define	APBH_CTRL0_CLKGATE_CHANNEL_SSP3			0x0008
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND0		0x0010
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND1		0x0020
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND2		0x0040
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND3		0x0080
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND4		0x0100
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND5		0x0200
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND6		0x0400
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND7		0x0800
+#define	APBH_CTRL0_CLKGATE_CHANNEL_HSADC		0x1000
+#define	APBH_CTRL0_CLKGATE_CHANNEL_LCDIF		0x2000
+#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M))
+#define	APBH_CTRL0_CLKGATE_CHANNEL_OFFSET		0
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND0		0x0001
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND1		0x0002
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND2		0x0004
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND3		0x0008
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND4		0x0010
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND5		0x0020
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND6		0x0040
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND7		0x0080
+#define	APBH_CTRL0_CLKGATE_CHANNEL_SSP			0x0100
+#endif
+
+#define	APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN			(1 << 31)
+#define	APBH_CTRL1_CH14_CMDCMPLT_IRQ_EN			(1 << 30)
+#define	APBH_CTRL1_CH13_CMDCMPLT_IRQ_EN			(1 << 29)
+#define	APBH_CTRL1_CH12_CMDCMPLT_IRQ_EN			(1 << 28)
+#define	APBH_CTRL1_CH11_CMDCMPLT_IRQ_EN			(1 << 27)
+#define	APBH_CTRL1_CH10_CMDCMPLT_IRQ_EN			(1 << 26)
+#define	APBH_CTRL1_CH9_CMDCMPLT_IRQ_EN			(1 << 25)
+#define	APBH_CTRL1_CH8_CMDCMPLT_IRQ_EN			(1 << 24)
+#define	APBH_CTRL1_CH7_CMDCMPLT_IRQ_EN			(1 << 23)
+#define	APBH_CTRL1_CH6_CMDCMPLT_IRQ_EN			(1 << 22)
+#define	APBH_CTRL1_CH5_CMDCMPLT_IRQ_EN			(1 << 21)
+#define	APBH_CTRL1_CH4_CMDCMPLT_IRQ_EN			(1 << 20)
+#define	APBH_CTRL1_CH3_CMDCMPLT_IRQ_EN			(1 << 19)
+#define	APBH_CTRL1_CH2_CMDCMPLT_IRQ_EN			(1 << 18)
+#define	APBH_CTRL1_CH1_CMDCMPLT_IRQ_EN			(1 << 17)
+#define	APBH_CTRL1_CH0_CMDCMPLT_IRQ_EN			(1 << 16)
+#define	APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET		16
+#define	APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_MASK		(0xffff << 16)
+#define	APBH_CTRL1_CH15_CMDCMPLT_IRQ			(1 << 15)
+#define	APBH_CTRL1_CH14_CMDCMPLT_IRQ			(1 << 14)
+#define	APBH_CTRL1_CH13_CMDCMPLT_IRQ			(1 << 13)
+#define	APBH_CTRL1_CH12_CMDCMPLT_IRQ			(1 << 12)
+#define	APBH_CTRL1_CH11_CMDCMPLT_IRQ			(1 << 11)
+#define	APBH_CTRL1_CH10_CMDCMPLT_IRQ			(1 << 10)
+#define	APBH_CTRL1_CH9_CMDCMPLT_IRQ			(1 << 9)
+#define	APBH_CTRL1_CH8_CMDCMPLT_IRQ			(1 << 8)
+#define	APBH_CTRL1_CH7_CMDCMPLT_IRQ			(1 << 7)
+#define	APBH_CTRL1_CH6_CMDCMPLT_IRQ			(1 << 6)
+#define	APBH_CTRL1_CH5_CMDCMPLT_IRQ			(1 << 5)
+#define	APBH_CTRL1_CH4_CMDCMPLT_IRQ			(1 << 4)
+#define	APBH_CTRL1_CH3_CMDCMPLT_IRQ			(1 << 3)
+#define	APBH_CTRL1_CH2_CMDCMPLT_IRQ			(1 << 2)
+#define	APBH_CTRL1_CH1_CMDCMPLT_IRQ			(1 << 1)
+#define	APBH_CTRL1_CH0_CMDCMPLT_IRQ			(1 << 0)
+
+#define	APBH_CTRL2_CH15_ERROR_STATUS			(1 << 31)
+#define	APBH_CTRL2_CH14_ERROR_STATUS			(1 << 30)
+#define	APBH_CTRL2_CH13_ERROR_STATUS			(1 << 29)
+#define	APBH_CTRL2_CH12_ERROR_STATUS			(1 << 28)
+#define	APBH_CTRL2_CH11_ERROR_STATUS			(1 << 27)
+#define	APBH_CTRL2_CH10_ERROR_STATUS			(1 << 26)
+#define	APBH_CTRL2_CH9_ERROR_STATUS			(1 << 25)
+#define	APBH_CTRL2_CH8_ERROR_STATUS			(1 << 24)
+#define	APBH_CTRL2_CH7_ERROR_STATUS			(1 << 23)
+#define	APBH_CTRL2_CH6_ERROR_STATUS			(1 << 22)
+#define	APBH_CTRL2_CH5_ERROR_STATUS			(1 << 21)
+#define	APBH_CTRL2_CH4_ERROR_STATUS			(1 << 20)
+#define	APBH_CTRL2_CH3_ERROR_STATUS			(1 << 19)
+#define	APBH_CTRL2_CH2_ERROR_STATUS			(1 << 18)
+#define	APBH_CTRL2_CH1_ERROR_STATUS			(1 << 17)
+#define	APBH_CTRL2_CH0_ERROR_STATUS			(1 << 16)
+#define	APBH_CTRL2_CH15_ERROR_IRQ			(1 << 15)
+#define	APBH_CTRL2_CH14_ERROR_IRQ			(1 << 14)
+#define	APBH_CTRL2_CH13_ERROR_IRQ			(1 << 13)
+#define	APBH_CTRL2_CH12_ERROR_IRQ			(1 << 12)
+#define	APBH_CTRL2_CH11_ERROR_IRQ			(1 << 11)
+#define	APBH_CTRL2_CH10_ERROR_IRQ			(1 << 10)
+#define	APBH_CTRL2_CH9_ERROR_IRQ			(1 << 9)
+#define	APBH_CTRL2_CH8_ERROR_IRQ			(1 << 8)
+#define	APBH_CTRL2_CH7_ERROR_IRQ			(1 << 7)
+#define	APBH_CTRL2_CH6_ERROR_IRQ			(1 << 6)
+#define	APBH_CTRL2_CH5_ERROR_IRQ			(1 << 5)
+#define	APBH_CTRL2_CH4_ERROR_IRQ			(1 << 4)
+#define	APBH_CTRL2_CH3_ERROR_IRQ			(1 << 3)
+#define	APBH_CTRL2_CH2_ERROR_IRQ			(1 << 2)
+#define	APBH_CTRL2_CH1_ERROR_IRQ			(1 << 1)
+#define	APBH_CTRL2_CH0_ERROR_IRQ			(1 << 0)
+
+#if defined(CONFIG_MX28)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_MASK		(0xffff << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP0		(0x0001 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP1		(0x0002 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP2		(0x0004 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP3		(0x0008 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND0		(0x0010 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND1		(0x0020 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND2		(0x0040 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND3		(0x0080 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND4		(0x0100 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND5		(0x0200 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND6		(0x0400 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND7		(0x0800 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_HSADC		(0x1000 << 16)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_LCDIF		(0x2000 << 16)
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_MASK		0xffff
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET		0
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP0		0x0001
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP1		0x0002
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP2		0x0004
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP3		0x0008
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND0		0x0010
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND1		0x0020
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND2		0x0040
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND3		0x0080
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND4		0x0100
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND5		0x0200
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND6		0x0400
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND7		0x0800
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_HSADC		0x1000
+#define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF		0x2000
+#endif
+
+/* Not on i.MX23 */
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET		16
+
+#if defined(CONFIG_MX23)
+#define	APBH_DEVSEL_CH7_MASK				(0xf << 28)
+#define	APBH_DEVSEL_CH7_OFFSET				28
+#define	APBH_DEVSEL_CH6_MASK				(0xf << 24)
+#define	APBH_DEVSEL_CH6_OFFSET				24
+#define	APBH_DEVSEL_CH5_MASK				(0xf << 20)
+#define	APBH_DEVSEL_CH5_OFFSET				20
+#define	APBH_DEVSEL_CH4_MASK				(0xf << 16)
+#define	APBH_DEVSEL_CH4_OFFSET				16
+#define	APBH_DEVSEL_CH3_MASK				(0xf << 12)
+#define	APBH_DEVSEL_CH3_OFFSET				12
+#define	APBH_DEVSEL_CH2_MASK				(0xf << 8)
+#define	APBH_DEVSEL_CH2_OFFSET				8
+#define	APBH_DEVSEL_CH1_MASK				(0xf << 4)
+#define	APBH_DEVSEL_CH1_OFFSET				4
+#define	APBH_DEVSEL_CH0_MASK				(0xf << 0)
+#define	APBH_DEVSEL_CH0_OFFSET				0
+#elif defined(CONFIG_MX28)
+#define	APBH_DEVSEL_CH15_MASK				(0x3 << 30)
+#define	APBH_DEVSEL_CH15_OFFSET				30
+#define	APBH_DEVSEL_CH14_MASK				(0x3 << 28)
+#define	APBH_DEVSEL_CH14_OFFSET				28
+#define	APBH_DEVSEL_CH13_MASK				(0x3 << 26)
+#define	APBH_DEVSEL_CH13_OFFSET				26
+#define	APBH_DEVSEL_CH12_MASK				(0x3 << 24)
+#define	APBH_DEVSEL_CH12_OFFSET				24
+#define	APBH_DEVSEL_CH11_MASK				(0x3 << 22)
+#define	APBH_DEVSEL_CH11_OFFSET				22
+#define	APBH_DEVSEL_CH10_MASK				(0x3 << 20)
+#define	APBH_DEVSEL_CH10_OFFSET				20
+#define	APBH_DEVSEL_CH9_MASK				(0x3 << 18)
+#define	APBH_DEVSEL_CH9_OFFSET				18
+#define	APBH_DEVSEL_CH8_MASK				(0x3 << 16)
+#define	APBH_DEVSEL_CH8_OFFSET				16
+#define	APBH_DEVSEL_CH7_MASK				(0x3 << 14)
+#define	APBH_DEVSEL_CH7_OFFSET				14
+#define	APBH_DEVSEL_CH6_MASK				(0x3 << 12)
+#define	APBH_DEVSEL_CH6_OFFSET				12
+#define	APBH_DEVSEL_CH5_MASK				(0x3 << 10)
+#define	APBH_DEVSEL_CH5_OFFSET				10
+#define	APBH_DEVSEL_CH4_MASK				(0x3 << 8)
+#define	APBH_DEVSEL_CH4_OFFSET				8
+#define	APBH_DEVSEL_CH3_MASK				(0x3 << 6)
+#define	APBH_DEVSEL_CH3_OFFSET				6
+#define	APBH_DEVSEL_CH2_MASK				(0x3 << 4)
+#define	APBH_DEVSEL_CH2_OFFSET				4
+#define	APBH_DEVSEL_CH1_MASK				(0x3 << 2)
+#define	APBH_DEVSEL_CH1_OFFSET				2
+#define	APBH_DEVSEL_CH0_MASK				(0x3 << 0)
+#define	APBH_DEVSEL_CH0_OFFSET				0
+#endif
+
+#if defined(CONFIG_MX28)
+#define	APBH_DMA_BURST_SIZE_CH15_MASK			(0x3 << 30)
+#define	APBH_DMA_BURST_SIZE_CH15_OFFSET			30
+#define	APBH_DMA_BURST_SIZE_CH14_MASK			(0x3 << 28)
+#define	APBH_DMA_BURST_SIZE_CH14_OFFSET			28
+#define	APBH_DMA_BURST_SIZE_CH13_MASK			(0x3 << 26)
+#define	APBH_DMA_BURST_SIZE_CH13_OFFSET			26
+#define	APBH_DMA_BURST_SIZE_CH12_MASK			(0x3 << 24)
+#define	APBH_DMA_BURST_SIZE_CH12_OFFSET			24
+#define	APBH_DMA_BURST_SIZE_CH11_MASK			(0x3 << 22)
+#define	APBH_DMA_BURST_SIZE_CH11_OFFSET			22
+#define	APBH_DMA_BURST_SIZE_CH10_MASK			(0x3 << 20)
+#define	APBH_DMA_BURST_SIZE_CH10_OFFSET			20
+#define	APBH_DMA_BURST_SIZE_CH9_MASK			(0x3 << 18)
+#define	APBH_DMA_BURST_SIZE_CH9_OFFSET			18
+#define	APBH_DMA_BURST_SIZE_CH8_MASK			(0x3 << 16)
+#define	APBH_DMA_BURST_SIZE_CH8_OFFSET			16
+#define	APBH_DMA_BURST_SIZE_CH8_BURST0			(0x0 << 16)
+#define	APBH_DMA_BURST_SIZE_CH8_BURST4			(0x1 << 16)
+#define	APBH_DMA_BURST_SIZE_CH8_BURST8			(0x2 << 16)
+#define	APBH_DMA_BURST_SIZE_CH7_MASK			(0x3 << 14)
+#define	APBH_DMA_BURST_SIZE_CH7_OFFSET			14
+#define	APBH_DMA_BURST_SIZE_CH6_MASK			(0x3 << 12)
+#define	APBH_DMA_BURST_SIZE_CH6_OFFSET			12
+#define	APBH_DMA_BURST_SIZE_CH5_MASK			(0x3 << 10)
+#define	APBH_DMA_BURST_SIZE_CH5_OFFSET			10
+#define	APBH_DMA_BURST_SIZE_CH4_MASK			(0x3 << 8)
+#define	APBH_DMA_BURST_SIZE_CH4_OFFSET			8
+#define	APBH_DMA_BURST_SIZE_CH3_MASK			(0x3 << 6)
+#define	APBH_DMA_BURST_SIZE_CH3_OFFSET			6
+#define	APBH_DMA_BURST_SIZE_CH3_BURST0			(0x0 << 6)
+#define	APBH_DMA_BURST_SIZE_CH3_BURST4			(0x1 << 6)
+#define	APBH_DMA_BURST_SIZE_CH3_BURST8			(0x2 << 6)
+
+#define	APBH_DMA_BURST_SIZE_CH2_MASK			(0x3 << 4)
+#define	APBH_DMA_BURST_SIZE_CH2_OFFSET			4
+#define	APBH_DMA_BURST_SIZE_CH2_BURST0			(0x0 << 4)
+#define	APBH_DMA_BURST_SIZE_CH2_BURST4			(0x1 << 4)
+#define	APBH_DMA_BURST_SIZE_CH2_BURST8			(0x2 << 4)
+#define	APBH_DMA_BURST_SIZE_CH1_MASK			(0x3 << 2)
+#define	APBH_DMA_BURST_SIZE_CH1_OFFSET			2
+#define	APBH_DMA_BURST_SIZE_CH1_BURST0			(0x0 << 2)
+#define	APBH_DMA_BURST_SIZE_CH1_BURST4			(0x1 << 2)
+#define	APBH_DMA_BURST_SIZE_CH1_BURST8			(0x2 << 2)
+
+#define	APBH_DMA_BURST_SIZE_CH0_MASK			0x3
+#define	APBH_DMA_BURST_SIZE_CH0_OFFSET			0
+#define	APBH_DMA_BURST_SIZE_CH0_BURST0			0x0
+#define	APBH_DMA_BURST_SIZE_CH0_BURST4			0x1
+#define	APBH_DMA_BURST_SIZE_CH0_BURST8			0x2
+
+#define	APBH_DEBUG_GPMI_ONE_FIFO			(1 << 0)
+#endif
+
+#define	APBH_CHn_CURCMDAR_CMD_ADDR_MASK			0xffffffff
+#define	APBH_CHn_CURCMDAR_CMD_ADDR_OFFSET		0
+
+#define	APBH_CHn_NXTCMDAR_CMD_ADDR_MASK			0xffffffff
+#define	APBH_CHn_NXTCMDAR_CMD_ADDR_OFFSET		0
+
+#define	APBH_CHn_CMD_XFER_COUNT_MASK			(0xffff << 16)
+#define	APBH_CHn_CMD_XFER_COUNT_OFFSET			16
+#define	APBH_CHn_CMD_CMDWORDS_MASK			(0xf << 12)
+#define	APBH_CHn_CMD_CMDWORDS_OFFSET			12
+#define	APBH_CHn_CMD_HALTONTERMINATE			(1 << 8)
+#define	APBH_CHn_CMD_WAIT4ENDCMD			(1 << 7)
+#define	APBH_CHn_CMD_SEMAPHORE				(1 << 6)
+#define	APBH_CHn_CMD_NANDWAIT4READY			(1 << 5)
+#define	APBH_CHn_CMD_NANDLOCK				(1 << 4)
+#define	APBH_CHn_CMD_IRQONCMPLT				(1 << 3)
+#define	APBH_CHn_CMD_CHAIN				(1 << 2)
+#define	APBH_CHn_CMD_COMMAND_MASK			0x3
+#define	APBH_CHn_CMD_COMMAND_OFFSET			0
+#define	APBH_CHn_CMD_COMMAND_NO_DMA_XFER		0x0
+#define	APBH_CHn_CMD_COMMAND_DMA_WRITE			0x1
+#define	APBH_CHn_CMD_COMMAND_DMA_READ			0x2
+#define	APBH_CHn_CMD_COMMAND_DMA_SENSE			0x3
+
+#define	APBH_CHn_BAR_ADDRESS_MASK			0xffffffff
+#define	APBH_CHn_BAR_ADDRESS_OFFSET			0
+
+#define	APBH_CHn_SEMA_RSVD2_MASK			(0xff << 24)
+#define	APBH_CHn_SEMA_RSVD2_OFFSET			24
+#define	APBH_CHn_SEMA_PHORE_MASK			(0xff << 16)
+#define	APBH_CHn_SEMA_PHORE_OFFSET			16
+#define	APBH_CHn_SEMA_RSVD1_MASK			(0xff << 8)
+#define	APBH_CHn_SEMA_RSVD1_OFFSET			8
+#define	APBH_CHn_SEMA_INCREMENT_SEMA_MASK		(0xff << 0)
+#define	APBH_CHn_SEMA_INCREMENT_SEMA_OFFSET		0
+
+#define	APBH_CHn_DEBUG1_REQ				(1 << 31)
+#define	APBH_CHn_DEBUG1_BURST				(1 << 30)
+#define	APBH_CHn_DEBUG1_KICK				(1 << 29)
+#define	APBH_CHn_DEBUG1_END				(1 << 28)
+#define	APBH_CHn_DEBUG1_SENSE				(1 << 27)
+#define	APBH_CHn_DEBUG1_READY				(1 << 26)
+#define	APBH_CHn_DEBUG1_LOCK				(1 << 25)
+#define	APBH_CHn_DEBUG1_NEXTCMDADDRVALID		(1 << 24)
+#define	APBH_CHn_DEBUG1_RD_FIFO_EMPTY			(1 << 23)
+#define	APBH_CHn_DEBUG1_RD_FIFO_FULL			(1 << 22)
+#define	APBH_CHn_DEBUG1_WR_FIFO_EMPTY			(1 << 21)
+#define	APBH_CHn_DEBUG1_WR_FIFO_FULL			(1 << 20)
+#define	APBH_CHn_DEBUG1_RSVD1_MASK			(0x7fff << 5)
+#define	APBH_CHn_DEBUG1_RSVD1_OFFSET			5
+#define	APBH_CHn_DEBUG1_STATEMACHINE_MASK		0x1f
+#define	APBH_CHn_DEBUG1_STATEMACHINE_OFFSET		0
+#define	APBH_CHn_DEBUG1_STATEMACHINE_IDLE		0x00
+#define	APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD1		0x01
+#define	APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD3		0x02
+#define	APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD2		0x03
+#define	APBH_CHn_DEBUG1_STATEMACHINE_XFER_DECODE	0x04
+#define	APBH_CHn_DEBUG1_STATEMACHINE_REQ_WAIT		0x05
+#define	APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD4		0x06
+#define	APBH_CHn_DEBUG1_STATEMACHINE_PIO_REQ		0x07
+#define	APBH_CHn_DEBUG1_STATEMACHINE_READ_FLUSH		0x08
+#define	APBH_CHn_DEBUG1_STATEMACHINE_READ_WAIT		0x09
+#define	APBH_CHn_DEBUG1_STATEMACHINE_WRITE		0x0c
+#define	APBH_CHn_DEBUG1_STATEMACHINE_READ_REQ		0x0d
+#define	APBH_CHn_DEBUG1_STATEMACHINE_CHECK_CHAIN	0x0e
+#define	APBH_CHn_DEBUG1_STATEMACHINE_XFER_COMPLETE	0x0f
+#define	APBH_CHn_DEBUG1_STATEMACHINE_TERMINATE		0x14
+#define	APBH_CHn_DEBUG1_STATEMACHINE_WAIT_END		0x15
+#define	APBH_CHn_DEBUG1_STATEMACHINE_WRITE_WAIT		0x1c
+#define	APBH_CHn_DEBUG1_STATEMACHINE_HALT_AFTER_TERM	0x1d
+#define	APBH_CHn_DEBUG1_STATEMACHINE_CHECK_WAIT		0x1e
+#define	APBH_CHn_DEBUG1_STATEMACHINE_WAIT_READY		0x1f
+
+#define	APBH_CHn_DEBUG2_APB_BYTES_MASK			(0xffff << 16)
+#define	APBH_CHn_DEBUG2_APB_BYTES_OFFSET		16
+#define	APBH_CHn_DEBUG2_AHB_BYTES_MASK			0xffff
+#define	APBH_CHn_DEBUG2_AHB_BYTES_OFFSET		0
+
+#define	APBH_VERSION_MAJOR_MASK				(0xff << 24)
+#define	APBH_VERSION_MAJOR_OFFSET			24
+#define	APBH_VERSION_MINOR_MASK				(0xff << 16)
+#define	APBH_VERSION_MINOR_OFFSET			16
+#define	APBH_VERSION_STEP_MASK				0xffff
+#define	APBH_VERSION_STEP_OFFSET			0
+
+#endif	/* __REGS_APBH_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/regs-bch.h b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-bch.h
new file mode 100644
index 000000000..5a149002e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-bch.h
@@ -0,0 +1,234 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 BCH Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010, 2016 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2020 NXP
+ *
+ */
+
+#ifndef __MX28_REGS_BCH_H__
+#define __MX28_REGS_BCH_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_bch_regs {
+	mxs_reg_32(hw_bch_ctrl)
+	mxs_reg_32(hw_bch_status0)
+	mxs_reg_32(hw_bch_mode)
+	mxs_reg_32(hw_bch_encodeptr)
+	mxs_reg_32(hw_bch_dataptr)
+	mxs_reg_32(hw_bch_metaptr)
+
+	uint32_t	reserved[4];
+
+	mxs_reg_32(hw_bch_layoutselect)
+	mxs_reg_32(hw_bch_flash0layout0)
+	mxs_reg_32(hw_bch_flash0layout1)
+	mxs_reg_32(hw_bch_flash1layout0)
+	mxs_reg_32(hw_bch_flash1layout1)
+	mxs_reg_32(hw_bch_flash2layout0)
+	mxs_reg_32(hw_bch_flash2layout1)
+	mxs_reg_32(hw_bch_flash3layout0)
+	mxs_reg_32(hw_bch_flash3layout1)
+	mxs_reg_32(hw_bch_dbgkesread)
+	mxs_reg_32(hw_bch_dbgcsferead)
+	mxs_reg_32(hw_bch_dbgsyndegread)
+	mxs_reg_32(hw_bch_dbgahbmread)
+	mxs_reg_32(hw_bch_blockname)
+	mxs_reg_32(hw_bch_version)
+	mxs_reg_32(hw_bch_debug1)
+};
+#endif
+
+#define	BCH_CTRL_SFTRST					(1 << 31)
+#define	BCH_CTRL_CLKGATE				(1 << 30)
+#define	BCH_CTRL_DEBUGSYNDROME				(1 << 22)
+#define	BCH_CTRL_M2M_LAYOUT_MASK			(0x3 << 18)
+#define	BCH_CTRL_M2M_LAYOUT_OFFSET			18
+#define	BCH_CTRL_M2M_ENCODE				(1 << 17)
+#define	BCH_CTRL_M2M_ENABLE				(1 << 16)
+#define	BCH_CTRL_DEBUG_STALL_IRQ_EN			(1 << 10)
+#define	BCH_CTRL_COMPLETE_IRQ_EN			(1 << 8)
+#define	BCH_CTRL_BM_ERROR_IRQ				(1 << 3)
+#define	BCH_CTRL_DEBUG_STALL_IRQ			(1 << 2)
+#define	BCH_CTRL_COMPLETE_IRQ				(1 << 0)
+
+#define	BCH_STATUS0_HANDLE_MASK				(0xfff << 20)
+#define	BCH_STATUS0_HANDLE_OFFSET			20
+#define	BCH_STATUS0_COMPLETED_CE_MASK			(0xf << 16)
+#define	BCH_STATUS0_COMPLETED_CE_OFFSET			16
+#define	BCH_STATUS0_STATUS_BLK0_MASK			(0xff << 8)
+#define	BCH_STATUS0_STATUS_BLK0_OFFSET			8
+#define	BCH_STATUS0_STATUS_BLK0_ZERO			(0x00 << 8)
+#define	BCH_STATUS0_STATUS_BLK0_ERROR1			(0x01 << 8)
+#define	BCH_STATUS0_STATUS_BLK0_ERROR2			(0x02 << 8)
+#define	BCH_STATUS0_STATUS_BLK0_ERROR3			(0x03 << 8)
+#define	BCH_STATUS0_STATUS_BLK0_ERROR4			(0x04 << 8)
+#define	BCH_STATUS0_STATUS_BLK0_UNCORRECTABLE		(0xfe << 8)
+#define	BCH_STATUS0_STATUS_BLK0_ERASED			(0xff << 8)
+#define	BCH_STATUS0_ALLONES				(1 << 4)
+#define	BCH_STATUS0_CORRECTED				(1 << 3)
+#define	BCH_STATUS0_UNCORRECTABLE			(1 << 2)
+
+#define	BCH_MODE_ERASE_THRESHOLD_MASK			0xff
+#define	BCH_MODE_ERASE_THRESHOLD_OFFSET			0
+#define BCH_MODE_ERASE_THRESHOLD(v)			\
+	(((v) << BCH_MODE_ERASE_THRESHOLD_OFFSET) &	\
+	 BCH_MODE_ERASE_THRESHOLD_MASK)
+
+#define	BCH_ENCODEPTR_ADDR_MASK				0xffffffff
+#define	BCH_ENCODEPTR_ADDR_OFFSET			0
+
+#define	BCH_DATAPTR_ADDR_MASK				0xffffffff
+#define	BCH_DATAPTR_ADDR_OFFSET				0
+
+#define	BCH_METAPTR_ADDR_MASK				0xffffffff
+#define	BCH_METAPTR_ADDR_OFFSET				0
+
+#define	BCH_LAYOUTSELECT_CS15_SELECT_MASK		(0x3 << 30)
+#define	BCH_LAYOUTSELECT_CS15_SELECT_OFFSET		30
+#define	BCH_LAYOUTSELECT_CS14_SELECT_MASK		(0x3 << 28)
+#define	BCH_LAYOUTSELECT_CS14_SELECT_OFFSET		28
+#define	BCH_LAYOUTSELECT_CS13_SELECT_MASK		(0x3 << 26)
+#define	BCH_LAYOUTSELECT_CS13_SELECT_OFFSET		26
+#define	BCH_LAYOUTSELECT_CS12_SELECT_MASK		(0x3 << 24)
+#define	BCH_LAYOUTSELECT_CS12_SELECT_OFFSET		24
+#define	BCH_LAYOUTSELECT_CS11_SELECT_MASK		(0x3 << 22)
+#define	BCH_LAYOUTSELECT_CS11_SELECT_OFFSET		22
+#define	BCH_LAYOUTSELECT_CS10_SELECT_MASK		(0x3 << 20)
+#define	BCH_LAYOUTSELECT_CS10_SELECT_OFFSET		20
+#define	BCH_LAYOUTSELECT_CS9_SELECT_MASK		(0x3 << 18)
+#define	BCH_LAYOUTSELECT_CS9_SELECT_OFFSET		18
+#define	BCH_LAYOUTSELECT_CS8_SELECT_MASK		(0x3 << 16)
+#define	BCH_LAYOUTSELECT_CS8_SELECT_OFFSET		16
+#define	BCH_LAYOUTSELECT_CS7_SELECT_MASK		(0x3 << 14)
+#define	BCH_LAYOUTSELECT_CS7_SELECT_OFFSET		14
+#define	BCH_LAYOUTSELECT_CS6_SELECT_MASK		(0x3 << 12)
+#define	BCH_LAYOUTSELECT_CS6_SELECT_OFFSET		12
+#define	BCH_LAYOUTSELECT_CS5_SELECT_MASK		(0x3 << 10)
+#define	BCH_LAYOUTSELECT_CS5_SELECT_OFFSET		10
+#define	BCH_LAYOUTSELECT_CS4_SELECT_MASK		(0x3 << 8)
+#define	BCH_LAYOUTSELECT_CS4_SELECT_OFFSET		8
+#define	BCH_LAYOUTSELECT_CS3_SELECT_MASK		(0x3 << 6)
+#define	BCH_LAYOUTSELECT_CS3_SELECT_OFFSET		6
+#define	BCH_LAYOUTSELECT_CS2_SELECT_MASK		(0x3 << 4)
+#define	BCH_LAYOUTSELECT_CS2_SELECT_OFFSET		4
+#define	BCH_LAYOUTSELECT_CS1_SELECT_MASK		(0x3 << 2)
+#define	BCH_LAYOUTSELECT_CS1_SELECT_OFFSET		2
+#define	BCH_LAYOUTSELECT_CS0_SELECT_MASK		(0x3 << 0)
+#define	BCH_LAYOUTSELECT_CS0_SELECT_OFFSET		0
+
+#define	BCH_FLASHLAYOUT0_NBLOCKS_MASK			(0xff << 24)
+#define	BCH_FLASHLAYOUT0_NBLOCKS_OFFSET			24
+#define	BCH_FLASHLAYOUT0_META_SIZE_MASK			(0xff << 16)
+#define	BCH_FLASHLAYOUT0_META_SIZE_OFFSET		16
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M))
+#define	BCH_FLASHLAYOUT0_ECC0_MASK			(0x1f << 11)
+#define	BCH_FLASHLAYOUT0_ECC0_OFFSET			11
+#else
+#define	BCH_FLASHLAYOUT0_ECC0_MASK			(0xf << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_OFFSET			12
+#endif
+#define	BCH_FLASHLAYOUT0_ECC0_NONE			(0x0 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC2			(0x1 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC4			(0x2 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC6			(0x3 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC8			(0x4 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC10			(0x5 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC12			(0x6 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC14			(0x7 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC16			(0x8 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC18			(0x9 << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC20			(0xa << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC22			(0xb << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC24			(0xc << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC26			(0xd << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC28			(0xe << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC30			(0xf << 12)
+#define	BCH_FLASHLAYOUT0_ECC0_ECC32			(0x10 << 12)
+#define	BCH_FLASHLAYOUT0_GF13_0_GF14_1_MASK		BIT(10)
+#define	BCH_FLASHLAYOUT0_GF13_0_GF14_1_OFFSET		10
+#define	BCH_FLASHLAYOUT0_DATA0_SIZE_MASK		0x3ff
+#define	BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET		0
+
+#define	BCH_FLASHLAYOUT1_PAGE_SIZE_MASK			(0xffff << 16)
+#define	BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET		16
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M))
+#define	BCH_FLASHLAYOUT1_ECCN_MASK			(0x1f << 11)
+#define	BCH_FLASHLAYOUT1_ECCN_OFFSET			11
+#else
+#define	BCH_FLASHLAYOUT1_ECCN_MASK			(0xf << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_OFFSET			12
+#endif
+#define	BCH_FLASHLAYOUT1_ECCN_NONE			(0x0 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC2			(0x1 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC4			(0x2 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC6			(0x3 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC8			(0x4 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC10			(0x5 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC12			(0x6 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC14			(0x7 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC16			(0x8 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC18			(0x9 << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC20			(0xa << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC22			(0xb << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC24			(0xc << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC26			(0xd << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC28			(0xe << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC30			(0xf << 12)
+#define	BCH_FLASHLAYOUT1_ECCN_ECC32			(0x10 << 12)
+#define	BCH_FLASHLAYOUT1_GF13_0_GF14_1_MASK		BIT(10)
+#define	BCH_FLASHLAYOUT1_GF13_0_GF14_1_OFFSET		10
+#define	BCH_FLASHLAYOUT1_DATAN_SIZE_MASK		0x3ff
+#define	BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET		0
+
+#define	BCH_DEBUG0_RSVD1_MASK				(0x1f << 27)
+#define	BCH_DEBUG0_RSVD1_OFFSET				27
+#define	BCH_DEBUG0_ROM_BIST_ENABLE			(1 << 26)
+#define	BCH_DEBUG0_ROM_BIST_COMPLETE			(1 << 25)
+#define	BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_MASK	(0x1ff << 16)
+#define	BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_OFFSET	16
+#define	BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_NORMAL	(0x0 << 16)
+#define	BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_TEST_MODE	(0x1 << 16)
+#define	BCH_DEBUG0_KES_DEBUG_SHIFT_SYND			(1 << 15)
+#define	BCH_DEBUG0_KES_DEBUG_PAYLOAD_FLAG		(1 << 14)
+#define	BCH_DEBUG0_KES_DEBUG_MODE4K			(1 << 13)
+#define	BCH_DEBUG0_KES_DEBUG_KICK			(1 << 12)
+#define	BCH_DEBUG0_KES_STANDALONE			(1 << 11)
+#define	BCH_DEBUG0_KES_DEBUG_STEP			(1 << 10)
+#define	BCH_DEBUG0_KES_DEBUG_STALL			(1 << 9)
+#define	BCH_DEBUG0_BM_KES_TEST_BYPASS			(1 << 8)
+#define	BCH_DEBUG0_RSVD0_MASK				(0x3 << 6)
+#define	BCH_DEBUG0_RSVD0_OFFSET				6
+#define	BCH_DEBUG0_DEBUG_REG_SELECT_MASK		0x3f
+#define	BCH_DEBUG0_DEBUG_REG_SELECT_OFFSET		0
+
+#define	BCH_DBGKESREAD_VALUES_MASK			0xffffffff
+#define	BCH_DBGKESREAD_VALUES_OFFSET			0
+
+#define	BCH_DBGCSFEREAD_VALUES_MASK			0xffffffff
+#define	BCH_DBGCSFEREAD_VALUES_OFFSET			0
+
+#define	BCH_DBGSYNDGENREAD_VALUES_MASK			0xffffffff
+#define	BCH_DBGSYNDGENREAD_VALUES_OFFSET		0
+
+#define	BCH_DBGAHBMREAD_VALUES_MASK			0xffffffff
+#define	BCH_DBGAHBMREAD_VALUES_OFFSET			0
+
+#define	BCH_BLOCKNAME_NAME_MASK				0xffffffff
+#define	BCH_BLOCKNAME_NAME_OFFSET			0
+
+#define	BCH_VERSION_MAJOR_MASK				(0xff << 24)
+#define	BCH_VERSION_MAJOR_OFFSET			24
+#define	BCH_VERSION_MINOR_MASK				(0xff << 16)
+#define	BCH_VERSION_MINOR_OFFSET			16
+#define	BCH_VERSION_STEP_MASK				0xffff
+#define	BCH_VERSION_STEP_OFFSET				0
+
+#endif	/* __MX28_REGS_BCH_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/regs-common.h b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-common.h
new file mode 100644
index 000000000..0f9bd3cd7
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-common.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MXS Register Accessors
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#ifndef __MXS_REGS_COMMON_H__
+#define __MXS_REGS_COMMON_H__
+
+#include <linux/types.h>
+
+/*
+ * The i.MXS has interesting feature when it comes to register access. There
+ * are four kinds of access to one particular register. Those are:
+ *
+ * 1) Common read/write access. To use this mode, just write to the address of
+ *    the register.
+ * 2) Set bits only access. To set bits, write which bits you want to set to the
+ *    address of the register + 0x4.
+ * 3) Clear bits only access. To clear bits, write which bits you want to clear
+ *    to the address of the register + 0x8.
+ * 4) Toggle bits only access. To toggle bits, write which bits you want to
+ *    toggle to the address of the register + 0xc.
+ *
+ * IMPORTANT NOTE: Not all registers support accesses 2-4! Also, not all bits
+ * can be set/cleared by pure write as in access type 1, some need to be
+ * explicitly set/cleared by using access type 2-3.
+ *
+ * The following macros and structures allow the user to either access the
+ * register in all aforementioned modes (by accessing reg_name, reg_name_set,
+ * reg_name_clr, reg_name_tog) or pass the register structure further into
+ * various functions with correct type information (by accessing reg_name_reg).
+ *
+ */
+
+#define	__mxs_reg_8(name)		\
+	uint8_t	name[4];		\
+	uint8_t	name##_set[4];		\
+	uint8_t	name##_clr[4];		\
+	uint8_t	name##_tog[4];		\
+
+#define	__mxs_reg_32(name)		\
+	uint32_t name;			\
+	uint32_t name##_set;		\
+	uint32_t name##_clr;		\
+	uint32_t name##_tog;
+
+struct mxs_register_8 {
+	__mxs_reg_8(reg)
+};
+
+struct mxs_register_32 {
+	__mxs_reg_32(reg)
+};
+
+#define	mxs_reg_8(name)				\
+	union {						\
+		struct { __mxs_reg_8(name) };		\
+		struct mxs_register_8 name##_reg;	\
+	};
+
+#define	mxs_reg_32(name)				\
+	union {						\
+		struct { __mxs_reg_32(name) };		\
+		struct mxs_register_32 name##_reg;	\
+	};
+
+#endif	/* __MXS_REGS_COMMON_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/regs-gpmi.h b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-gpmi.h
new file mode 100644
index 000000000..33daa53c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-gpmi.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28 GPMI Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __MX28_REGS_GPMI_H__
+#define __MX28_REGS_GPMI_H__
+
+#include <asm/mach-imx/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_gpmi_regs {
+	mxs_reg_32(hw_gpmi_ctrl0)
+	mxs_reg_32(hw_gpmi_compare)
+	mxs_reg_32(hw_gpmi_eccctrl)
+	mxs_reg_32(hw_gpmi_ecccount)
+	mxs_reg_32(hw_gpmi_payload)
+	mxs_reg_32(hw_gpmi_auxiliary)
+	mxs_reg_32(hw_gpmi_ctrl1)
+	mxs_reg_32(hw_gpmi_timing0)
+	mxs_reg_32(hw_gpmi_timing1)
+
+	uint32_t	reserved[4];
+
+	mxs_reg_32(hw_gpmi_data)
+	mxs_reg_32(hw_gpmi_stat)
+	mxs_reg_32(hw_gpmi_debug)
+	mxs_reg_32(hw_gpmi_version)
+};
+#endif
+
+#define	GPMI_CTRL0_SFTRST				(1 << 31)
+#define	GPMI_CTRL0_CLKGATE				(1 << 30)
+#define	GPMI_CTRL0_RUN					(1 << 29)
+#define	GPMI_CTRL0_DEV_IRQ_EN				(1 << 28)
+#define	GPMI_CTRL0_LOCK_CS				(1 << 27)
+#define	GPMI_CTRL0_UDMA					(1 << 26)
+#define	GPMI_CTRL0_COMMAND_MODE_MASK			(0x3 << 24)
+#define	GPMI_CTRL0_COMMAND_MODE_OFFSET			24
+#define	GPMI_CTRL0_COMMAND_MODE_WRITE			(0x0 << 24)
+#define	GPMI_CTRL0_COMMAND_MODE_READ			(0x1 << 24)
+#define	GPMI_CTRL0_COMMAND_MODE_READ_AND_COMPARE	(0x2 << 24)
+#define	GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY		(0x3 << 24)
+#define	GPMI_CTRL0_WORD_LENGTH				(1 << 23)
+#define	GPMI_CTRL0_CS_MASK				(0x7 << 20)
+#define	GPMI_CTRL0_CS_OFFSET				20
+#define	GPMI_CTRL0_ADDRESS_MASK				(0x7 << 17)
+#define	GPMI_CTRL0_ADDRESS_OFFSET			17
+#define	GPMI_CTRL0_ADDRESS_NAND_DATA			(0x0 << 17)
+#define	GPMI_CTRL0_ADDRESS_NAND_CLE			(0x1 << 17)
+#define	GPMI_CTRL0_ADDRESS_NAND_ALE			(0x2 << 17)
+#define	GPMI_CTRL0_ADDRESS_INCREMENT			(1 << 16)
+#define	GPMI_CTRL0_XFER_COUNT_MASK			0xffff
+#define	GPMI_CTRL0_XFER_COUNT_OFFSET			0
+
+#define	GPMI_COMPARE_MASK_MASK				(0xffff << 16)
+#define	GPMI_COMPARE_MASK_OFFSET			16
+#define	GPMI_COMPARE_REFERENCE_MASK			0xffff
+#define	GPMI_COMPARE_REFERENCE_OFFSET			0
+
+#define	GPMI_ECCCTRL_HANDLE_MASK			(0xffff << 16)
+#define	GPMI_ECCCTRL_HANDLE_OFFSET			16
+#define	GPMI_ECCCTRL_ECC_CMD_MASK			(0x3 << 13)
+#define	GPMI_ECCCTRL_ECC_CMD_OFFSET			13
+#define	GPMI_ECCCTRL_ECC_CMD_DECODE			(0x0 << 13)
+#define	GPMI_ECCCTRL_ECC_CMD_ENCODE			(0x1 << 13)
+#define	GPMI_ECCCTRL_RANDOMIZER_ENABLE			(1 << 11)
+#define	GPMI_ECCCTRL_RANDOMIZER_TYPE0			0
+#define	GPMI_ECCCTRL_RANDOMIZER_TYPE1			(1 << 9)
+#define	GPMI_ECCCTRL_RANDOMIZER_TYPE2			(2 << 9)
+
+#define	GPMI_ECCCTRL_ENABLE_ECC				(1 << 12)
+#define	GPMI_ECCCTRL_BUFFER_MASK_MASK			0x1ff
+#define	GPMI_ECCCTRL_BUFFER_MASK_OFFSET			0
+#define	GPMI_ECCCTRL_BUFFER_MASK_BCH_AUXONLY		0x100
+#define	GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE		0x1ff
+
+#define	GPMI_ECCCOUNT_COUNT_MASK			0xffff
+#define	GPMI_ECCCOUNT_COUNT_OFFSET			0
+
+#define	GPMI_PAYLOAD_ADDRESS_MASK			(0x3fffffff << 2)
+#define	GPMI_PAYLOAD_ADDRESS_OFFSET			2
+
+#define	GPMI_AUXILIARY_ADDRESS_MASK			(0x3fffffff << 2)
+#define	GPMI_AUXILIARY_ADDRESS_OFFSET			2
+
+#define	GPMI_CTRL1_DECOUPLE_CS				(1 << 24)
+#define	GPMI_CTRL1_WRN_DLY_SEL_MASK			(0x3 << 22)
+#define	GPMI_CTRL1_WRN_DLY_SEL_OFFSET			22
+#define	GPMI_CTRL1_TIMEOUT_IRQ_EN			(1 << 20)
+#define	GPMI_CTRL1_GANGED_RDYBUSY			(1 << 19)
+#define	GPMI_CTRL1_BCH_MODE				(1 << 18)
+#define	GPMI_CTRL1_DLL_ENABLE				(1 << 17)
+#define	GPMI_CTRL1_HALF_PERIOD				(1 << 16)
+#define	GPMI_CTRL1_RDN_DELAY_MASK			(0xf << 12)
+#define	GPMI_CTRL1_RDN_DELAY_OFFSET			12
+#define	GPMI_CTRL1_DMA2ECC_MODE				(1 << 11)
+#define	GPMI_CTRL1_DEV_IRQ				(1 << 10)
+#define	GPMI_CTRL1_TIMEOUT_IRQ				(1 << 9)
+#define	GPMI_CTRL1_BURST_EN				(1 << 8)
+#define	GPMI_CTRL1_ABORT_WAIT_REQUEST			(1 << 7)
+#define	GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_MASK	(0x7 << 4)
+#define	GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_OFFSET	4
+#define	GPMI_CTRL1_DEV_RESET				(1 << 3)
+#define	GPMI_CTRL1_ATA_IRQRDY_POLARITY			(1 << 2)
+#define	GPMI_CTRL1_CAMERA_MODE				(1 << 1)
+#define	GPMI_CTRL1_GPMI_MODE				(1 << 0)
+
+#define	GPMI_TIMING0_ADDRESS_SETUP_MASK			(0xff << 16)
+#define	GPMI_TIMING0_ADDRESS_SETUP_OFFSET		16
+#define	GPMI_TIMING0_DATA_HOLD_MASK			(0xff << 8)
+#define	GPMI_TIMING0_DATA_HOLD_OFFSET			8
+#define	GPMI_TIMING0_DATA_SETUP_MASK			0xff
+#define	GPMI_TIMING0_DATA_SETUP_OFFSET			0
+
+#define	GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_MASK		(0xffff << 16)
+#define	GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_OFFSET		16
+
+#define	GPMI_TIMING2_UDMA_TRP_MASK			(0xff << 24)
+#define	GPMI_TIMING2_UDMA_TRP_OFFSET			24
+#define	GPMI_TIMING2_UDMA_ENV_MASK			(0xff << 16)
+#define	GPMI_TIMING2_UDMA_ENV_OFFSET			16
+#define	GPMI_TIMING2_UDMA_HOLD_MASK			(0xff << 8)
+#define	GPMI_TIMING2_UDMA_HOLD_OFFSET			8
+#define	GPMI_TIMING2_UDMA_SETUP_MASK			0xff
+#define	GPMI_TIMING2_UDMA_SETUP_OFFSET			0
+
+#define	GPMI_DATA_DATA_MASK				0xffffffff
+#define	GPMI_DATA_DATA_OFFSET				0
+
+#define	GPMI_STAT_READY_BUSY_MASK			(0xff << 24)
+#define	GPMI_STAT_READY_BUSY_OFFSET			24
+#define	GPMI_STAT_RDY_TIMEOUT_MASK			(0xff << 16)
+#define	GPMI_STAT_RDY_TIMEOUT_OFFSET			16
+#define	GPMI_STAT_DEV7_ERROR				(1 << 15)
+#define	GPMI_STAT_DEV6_ERROR				(1 << 14)
+#define	GPMI_STAT_DEV5_ERROR				(1 << 13)
+#define	GPMI_STAT_DEV4_ERROR				(1 << 12)
+#define	GPMI_STAT_DEV3_ERROR				(1 << 11)
+#define	GPMI_STAT_DEV2_ERROR				(1 << 10)
+#define	GPMI_STAT_DEV1_ERROR				(1 << 9)
+#define	GPMI_STAT_DEV0_ERROR				(1 << 8)
+#define	GPMI_STAT_ATA_IRQ				(1 << 4)
+#define	GPMI_STAT_INVALID_BUFFER_MASK			(1 << 3)
+#define	GPMI_STAT_FIFO_EMPTY				(1 << 2)
+#define	GPMI_STAT_FIFO_FULL				(1 << 1)
+#define	GPMI_STAT_PRESENT				(1 << 0)
+
+#define	GPMI_DEBUG_WAIT_FOR_READY_END_MASK		(0xff << 24)
+#define	GPMI_DEBUG_WAIT_FOR_READY_END_OFFSET		24
+#define	GPMI_DEBUG_DMA_SENSE_MASK			(0xff << 16)
+#define	GPMI_DEBUG_DMA_SENSE_OFFSET			16
+#define	GPMI_DEBUG_DMAREQ_MASK				(0xff << 8)
+#define	GPMI_DEBUG_DMAREQ_OFFSET			8
+#define	GPMI_DEBUG_CMD_END_MASK				0xff
+#define	GPMI_DEBUG_CMD_END_OFFSET			0
+
+#define	GPMI_VERSION_MAJOR_MASK				(0xff << 24)
+#define	GPMI_VERSION_MAJOR_OFFSET			24
+#define	GPMI_VERSION_MINOR_MASK				(0xff << 16)
+#define	GPMI_VERSION_MINOR_OFFSET			16
+#define	GPMI_VERSION_STEP_MASK				0xffff
+#define	GPMI_VERSION_STEP_OFFSET			0
+
+#define	GPMI_DEBUG2_UDMA_STATE_MASK			(0xf << 24)
+#define	GPMI_DEBUG2_UDMA_STATE_OFFSET			24
+#define	GPMI_DEBUG2_BUSY				(1 << 23)
+#define	GPMI_DEBUG2_PIN_STATE_MASK			(0x7 << 20)
+#define	GPMI_DEBUG2_PIN_STATE_OFFSET			20
+#define	GPMI_DEBUG2_PIN_STATE_PSM_IDLE			(0x0 << 20)
+#define	GPMI_DEBUG2_PIN_STATE_PSM_BYTCNT		(0x1 << 20)
+#define	GPMI_DEBUG2_PIN_STATE_PSM_ADDR			(0x2 << 20)
+#define	GPMI_DEBUG2_PIN_STATE_PSM_STALL			(0x3 << 20)
+#define	GPMI_DEBUG2_PIN_STATE_PSM_STROBE		(0x4 << 20)
+#define	GPMI_DEBUG2_PIN_STATE_PSM_ATARDY		(0x5 << 20)
+#define	GPMI_DEBUG2_PIN_STATE_PSM_DHOLD			(0x6 << 20)
+#define	GPMI_DEBUG2_PIN_STATE_PSM_DONE			(0x7 << 20)
+#define	GPMI_DEBUG2_MAIN_STATE_MASK			(0xf << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_OFFSET			16
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_IDLE			(0x0 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_BYTCNT		(0x1 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_WAITFE		(0x2 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_WAITFR		(0x3 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_DMAREQ		(0x4 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_DMAACK		(0x5 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_WAITFF		(0x6 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_LDFIFO		(0x7 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_LDDMAR		(0x8 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_RDCMP		(0x9 << 16)
+#define	GPMI_DEBUG2_MAIN_STATE_MSM_DONE			(0xa << 16)
+#define	GPMI_DEBUG2_SYND2GPMI_BE_MASK			(0xf << 12)
+#define	GPMI_DEBUG2_SYND2GPMI_BE_OFFSET			12
+#define	GPMI_DEBUG2_GPMI2SYND_VALID			(1 << 11)
+#define	GPMI_DEBUG2_GPMI2SYND_READY			(1 << 10)
+#define	GPMI_DEBUG2_SYND2GPMI_VALID			(1 << 9)
+#define	GPMI_DEBUG2_SYND2GPMI_READY			(1 << 8)
+#define	GPMI_DEBUG2_VIEW_DELAYED_RDN			(1 << 7)
+#define	GPMI_DEBUG2_UPDATE_WINDOW			(1 << 6)
+#define	GPMI_DEBUG2_RDN_TAP_MASK			0x3f
+#define	GPMI_DEBUG2_RDN_TAP_OFFSET			0
+
+#define	GPMI_DEBUG3_APB_WORD_CNTR_MASK			(0xffff << 16)
+#define	GPMI_DEBUG3_APB_WORD_CNTR_OFFSET		16
+#define	GPMI_DEBUG3_DEV_WORD_CNTR_MASK			0xffff
+#define	GPMI_DEBUG3_DEV_WORD_CNTR_OFFSET		0
+
+#endif	/* __MX28_REGS_GPMI_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/regs-lcdif.h b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-lcdif.h
new file mode 100644
index 000000000..587463879
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-lcdif.h
@@ -0,0 +1,240 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale i.MX28/6SX/6UL/7D LCDIF Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+#ifndef __IMX_REGS_LCDIF_H__
+#define __IMX_REGS_LCDIF_H__
+
+#ifndef	__ASSEMBLY__
+#include <asm/mach-imx/regs-common.h>
+
+struct mxs_lcdif_regs {
+	mxs_reg_32(hw_lcdif_ctrl)		/* 0x00 */
+	mxs_reg_32(hw_lcdif_ctrl1)		/* 0x10 */
+#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+	defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \
+	defined(CONFIG_IMX8M) || defined(CONFIG_IMXRT)
+	mxs_reg_32(hw_lcdif_ctrl2)		/* 0x20 */
+#endif
+	mxs_reg_32(hw_lcdif_transfer_count)	/* 0x20/0x30 */
+	mxs_reg_32(hw_lcdif_cur_buf)		/* 0x30/0x40 */
+	mxs_reg_32(hw_lcdif_next_buf)		/* 0x40/0x50 */
+
+#if defined(CONFIG_MX23)
+	uint32_t	reserved1[4];
+#endif
+
+	mxs_reg_32(hw_lcdif_timing)		/* 0x60 */
+	mxs_reg_32(hw_lcdif_vdctrl0)		/* 0x70 */
+	mxs_reg_32(hw_lcdif_vdctrl1)		/* 0x80 */
+	mxs_reg_32(hw_lcdif_vdctrl2)		/* 0x90 */
+	mxs_reg_32(hw_lcdif_vdctrl3)		/* 0xa0 */
+	mxs_reg_32(hw_lcdif_vdctrl4)		/* 0xb0 */
+	mxs_reg_32(hw_lcdif_dvictrl0)		/* 0xc0 */
+	mxs_reg_32(hw_lcdif_dvictrl1)		/* 0xd0 */
+	mxs_reg_32(hw_lcdif_dvictrl2)		/* 0xe0 */
+	mxs_reg_32(hw_lcdif_dvictrl3)		/* 0xf0 */
+	mxs_reg_32(hw_lcdif_dvictrl4)		/* 0x100 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl0)	/* 0x110 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl1)	/* 0x120 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl2)	/* 0x130 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl3)	/* 0x140 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl4)	/* 0x150 */
+	mxs_reg_32(hw_lcdif_csc_offset)		/* 0x160 */
+	mxs_reg_32(hw_lcdif_csc_limit)		/* 0x170 */
+
+#if defined(CONFIG_MX23)
+	uint32_t	reserved2[12];
+#endif
+	mxs_reg_32(hw_lcdif_data)		/* 0x1b0/0x180 */
+	mxs_reg_32(hw_lcdif_bm_error_stat)	/* 0x1c0/0x190 */
+#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+	defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \
+	defined(CONFIG_IMX8M) || defined(CONFIG_IMXRT)
+	mxs_reg_32(hw_lcdif_crc_stat)		/* 0x1a0 */
+#endif
+	mxs_reg_32(hw_lcdif_lcdif_stat)		/* 0x1d0/0x1b0 */
+	mxs_reg_32(hw_lcdif_version)		/* 0x1e0/0x1c0 */
+	mxs_reg_32(hw_lcdif_debug0)		/* 0x1f0/0x1d0 */
+	mxs_reg_32(hw_lcdif_debug1)		/* 0x200/0x1e0 */
+	mxs_reg_32(hw_lcdif_debug2)		/* 0x1f0 */
+#if defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+	defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \
+	defined(CONFIG_IMX8M)
+	mxs_reg_32(hw_lcdif_thres)
+	mxs_reg_32(hw_lcdif_as_ctrl)
+	mxs_reg_32(hw_lcdif_as_buf)
+	mxs_reg_32(hw_lcdif_as_next_buf)
+	mxs_reg_32(hw_lcdif_as_clrkeylow)
+	mxs_reg_32(hw_lcdif_as_clrkeyhigh)
+	mxs_reg_32(hw_lcdif_as_sync_delay)
+	mxs_reg_32(hw_lcdif_as_debug3)
+	mxs_reg_32(hw_lcdif_as_debug4)
+	mxs_reg_32(hw_lcdif_as_debug5)
+#endif
+};
+#endif
+
+#define	LCDIF_CTRL_SFTRST					(1 << 31)
+#define	LCDIF_CTRL_CLKGATE					(1 << 30)
+#define	LCDIF_CTRL_YCBCR422_INPUT				(1 << 29)
+#define	LCDIF_CTRL_READ_WRITEB					(1 << 28)
+#define	LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE				(1 << 27)
+#define	LCDIF_CTRL_DATA_SHIFT_DIR				(1 << 26)
+#define	LCDIF_CTRL_SHIFT_NUM_BITS_MASK				(0x1f << 21)
+#define	LCDIF_CTRL_SHIFT_NUM_BITS_OFFSET			21
+#define	LCDIF_CTRL_DVI_MODE					(1 << 20)
+#define	LCDIF_CTRL_BYPASS_COUNT					(1 << 19)
+#define	LCDIF_CTRL_VSYNC_MODE					(1 << 18)
+#define	LCDIF_CTRL_DOTCLK_MODE					(1 << 17)
+#define	LCDIF_CTRL_DATA_SELECT					(1 << 16)
+#define	LCDIF_CTRL_INPUT_DATA_SWIZZLE_MASK			(0x3 << 14)
+#define	LCDIF_CTRL_INPUT_DATA_SWIZZLE_OFFSET			14
+#define	LCDIF_CTRL_CSC_DATA_SWIZZLE_MASK			(0x3 << 12)
+#define	LCDIF_CTRL_CSC_DATA_SWIZZLE_OFFSET			12
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK			(0x3 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_OFFSET			10
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT			(0 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT			(1 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT			(2 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT			(3 << 10)
+#define	LCDIF_CTRL_WORD_LENGTH_MASK				(0x3 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_OFFSET				8
+#define	LCDIF_CTRL_WORD_LENGTH_16BIT				(0 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_8BIT				(1 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_18BIT				(2 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_24BIT				(3 << 8)
+#define	LCDIF_CTRL_RGB_TO_YCBCR422_CSC				(1 << 7)
+#define	LCDIF_CTRL_LCDIF_MASTER					(1 << 5)
+#define	LCDIF_CTRL_DATA_FORMAT_16_BIT				(1 << 3)
+#define	LCDIF_CTRL_DATA_FORMAT_18_BIT				(1 << 2)
+#define	LCDIF_CTRL_DATA_FORMAT_24_BIT				(1 << 1)
+#define	LCDIF_CTRL_RUN						(1 << 0)
+
+#define	LCDIF_CTRL1_COMBINE_MPU_WR_STRB				(1 << 27)
+#define	LCDIF_CTRL1_BM_ERROR_IRQ_EN				(1 << 26)
+#define	LCDIF_CTRL1_BM_ERROR_IRQ				(1 << 25)
+#define	LCDIF_CTRL1_RECOVER_ON_UNDERFLOW			(1 << 24)
+#define	LCDIF_CTRL1_INTERLACE_FIELDS				(1 << 23)
+#define	LCDIF_CTRL1_START_INTERLACE_FROM_SECOND_FIELD		(1 << 22)
+#define	LCDIF_CTRL1_FIFO_CLEAR					(1 << 21)
+#define	LCDIF_CTRL1_IRQ_ON_ALTERNATE_FIELDS			(1 << 20)
+#define	LCDIF_CTRL1_BYTE_PACKING_FORMAT_MASK			(0xf << 16)
+#define	LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET			16
+#define	LCDIF_CTRL1_OVERFLOW_IRQ_EN				(1 << 15)
+#define	LCDIF_CTRL1_UNDERFLOW_IRQ_EN				(1 << 14)
+#define	LCDIF_CTRL1_CUR_FRAME_DONE_IRQ_EN			(1 << 13)
+#define	LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN				(1 << 12)
+#define	LCDIF_CTRL1_OVERFLOW_IRQ				(1 << 11)
+#define	LCDIF_CTRL1_UNDERFLOW_IRQ				(1 << 10)
+#define	LCDIF_CTRL1_CUR_FRAME_DONE_IRQ				(1 << 9)
+#define	LCDIF_CTRL1_VSYNC_EDGE_IRQ				(1 << 8)
+#define	LCDIF_CTRL1_BUSY_ENABLE					(1 << 2)
+#define	LCDIF_CTRL1_MODE86					(1 << 1)
+#define	LCDIF_CTRL1_RESET					(1 << 0)
+
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_MASK			(0x7 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_OFFSET			21
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_1			(0x0 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_2			(0x1 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_4			(0x2 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_8			(0x3 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_16			(0x4 << 21)
+#define	LCDIF_CTRL2_BURST_LEN_8					(1 << 20)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_MASK			(0x7 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_OFFSET			16
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_RGB			(0x0 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_RBG			(0x1 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_GBR			(0x2 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_GRB			(0x3 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_BRG			(0x4 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_BGR			(0x5 << 16)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_MASK			(0x7 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_OFFSET			12
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_RGB			(0x0 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_RBG			(0x1 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_GBR			(0x2 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_GRB			(0x3 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_BRG			(0x4 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_BGR			(0x5 << 12)
+#define	LCDIF_CTRL2_READ_PACK_DIR				(1 << 10)
+#define	LCDIF_CTRL2_READ_MODE_OUTPUT_IN_RGB_FORMAT		(1 << 9)
+#define	LCDIF_CTRL2_READ_MODE_6_BIT_INPUT			(1 << 8)
+#define	LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_MASK		(0x7 << 4)
+#define	LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_OFFSET	4
+#define	LCDIF_CTRL2_INITIAL_DUMMY_READ_MASK			(0x7 << 1)
+#define	LCDIF_CTRL2_INITIAL_DUMMY_READ_OFFSET			1
+
+#define	LCDIF_TRANSFER_COUNT_V_COUNT_MASK			(0xffff << 16)
+#define	LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET			16
+#define	LCDIF_TRANSFER_COUNT_H_COUNT_MASK			(0xffff << 0)
+#define	LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET			0
+
+#define	LCDIF_CUR_BUF_ADDR_MASK					0xffffffff
+#define	LCDIF_CUR_BUF_ADDR_OFFSET				0
+
+#define	LCDIF_NEXT_BUF_ADDR_MASK				0xffffffff
+#define	LCDIF_NEXT_BUF_ADDR_OFFSET				0
+
+#define	LCDIF_TIMING_CMD_HOLD_MASK				(0xff << 24)
+#define	LCDIF_TIMING_CMD_HOLD_OFFSET				24
+#define	LCDIF_TIMING_CMD_SETUP_MASK				(0xff << 16)
+#define	LCDIF_TIMING_CMD_SETUP_OFFSET				16
+#define	LCDIF_TIMING_DATA_HOLD_MASK				(0xff << 8)
+#define	LCDIF_TIMING_DATA_HOLD_OFFSET				8
+#define	LCDIF_TIMING_DATA_SETUP_MASK				(0xff << 0)
+#define	LCDIF_TIMING_DATA_SETUP_OFFSET				0
+
+#define	LCDIF_VDCTRL0_VSYNC_OEB					(1 << 29)
+#define	LCDIF_VDCTRL0_ENABLE_PRESENT				(1 << 28)
+#define	LCDIF_VDCTRL0_VSYNC_POL					(1 << 27)
+#define	LCDIF_VDCTRL0_HSYNC_POL					(1 << 26)
+#define	LCDIF_VDCTRL0_DOTCLK_POL				(1 << 25)
+#define	LCDIF_VDCTRL0_ENABLE_POL				(1 << 24)
+#define	LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT				(1 << 21)
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT			(1 << 20)
+#define	LCDIF_VDCTRL0_HALF_LINE					(1 << 19)
+#define	LCDIF_VDCTRL0_HALF_LINE_MODE				(1 << 18)
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_MASK			0x3ffff
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_OFFSET			0
+
+#define	LCDIF_VDCTRL1_VSYNC_PERIOD_MASK				0xffffffff
+#define	LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET			0
+
+#if defined(CONFIG_MX23)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK			(0xff << 24)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET			24
+#else
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK			(0x3fff << 18)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET			18
+#endif
+#define	LCDIF_VDCTRL2_HSYNC_PERIOD_MASK				0x3ffff
+#define	LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET			0
+
+#define	LCDIF_VDCTRL3_MUX_SYNC_SIGNALS				(1 << 29)
+#define	LCDIF_VDCTRL3_VSYNC_ONLY				(1 << 28)
+#define	LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_MASK			(0xfff << 16)
+#define	LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET		16
+#define	LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_MASK			(0xffff << 0)
+#define	LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_OFFSET			0
+
+#define	LCDIF_VDCTRL4_DOTCLK_DLY_SEL_MASK			(0x7 << 29)
+#define	LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET			29
+#define	LCDIF_VDCTRL4_SYNC_SIGNALS_ON				(1 << 18)
+#define	LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_MASK		0x3ffff
+#define	LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_OFFSET		0
+
+#endif /* __IMX_REGS_LCDIF_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/regs-usbphy.h b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-usbphy.h
new file mode 100644
index 000000000..2b18ec20f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/regs-usbphy.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Freescale USB PHY Register Definitions
+ *
+ */
+
+#ifndef __REGS_USBPHY_H__
+#define __REGS_USBPHY_H__
+
+#define USBPHY_CTRL						0x00000030
+#define USBPHY_CTRL_SET					0x00000034
+#define USBPHY_CTRL_CLR					0x00000038
+#define USBPHY_CTRL_TOG					0x0000003C
+#define USBPHY_PWD						0x00000000
+#define USBPHY_TX						0x00000010
+#define USBPHY_RX						0x00000020
+#define USBPHY_DEBUG					0x00000050
+
+#define USBPHY_CTRL_ENUTMILEVEL2		(1 << 14)
+#define USBPHY_CTRL_ENUTMILEVEL3		(1 << 15)
+#define USBPHY_CTRL_OTG_ID				(1 << 27)
+#define USBPHY_CTRL_CLKGATE				(1 << 30)
+#define USBPHY_CTRL_SFTRST				(1 << 31)
+
+#endif /* __REGS_USBPHY_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/sata.h b/roms/u-boot/arch/arm/include/asm/mach-imx/sata.h
new file mode 100644
index 000000000..cf9b73e68
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/sata.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __IMX_SATA_H_
+#define __IMX_SATA_H_
+
+/*
+ * SATA setup for i.mx6 quad based platform
+ */
+
+int setup_sata(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/spi.h b/roms/u-boot/arch/arm/include/asm/mach-imx/spi.h
new file mode 100644
index 000000000..598a996a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/spi.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MXC_SPI_H_
+#define __MXC_SPI_H_
+
+/*
+ * Board-level chip-select callback
+ * Should return GPIO # to be used for chip-select
+ */
+
+int board_spi_cs_gpio(unsigned bus, unsigned cs);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/sys_proto.h b/roms/u-boot/arch/arm/include/asm/mach-imx/sys_proto.h
new file mode 100644
index 000000000..b61218984
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/sys_proto.h
@@ -0,0 +1,228 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/io.h>
+#include <asm/mach-imx/regs-common.h>
+#include <asm/mach-imx/module_fuse.h>
+#include <linux/bitops.h>
+#include "../arch-imx/cpu.h"
+
+struct bd_info;
+
+#define soc_rev() (get_cpu_rev() & 0xFF)
+#define is_soc_rev(rev) (soc_rev() == rev)
+
+/* returns MXC_CPU_ value */
+#define cpu_type(rev) (((rev) >> 12) & 0x1ff)
+#define soc_type(rev) (((rev) >> 12) & 0xf0)
+/* both macros return/take MXC_CPU_ constants */
+#define get_cpu_type() (cpu_type(get_cpu_rev()))
+#define get_soc_type() (soc_type(get_cpu_rev()))
+#define is_cpu_type(cpu) (get_cpu_type() == cpu)
+#define is_soc_type(soc) (get_soc_type() == soc)
+
+#define is_mx6() (is_soc_type(MXC_SOC_MX6))
+#define is_mx7() (is_soc_type(MXC_SOC_MX7))
+#define is_imx8m() (is_soc_type(MXC_SOC_IMX8M))
+#define is_imx8() (is_soc_type(MXC_SOC_IMX8))
+#define is_imxrt() (is_soc_type(MXC_SOC_IMXRT))
+
+#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
+#define is_mx6dq() (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+#define is_mx6sdl() (is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6DL))
+#define is_mx6dl() (is_cpu_type(MXC_CPU_MX6DL))
+#define is_mx6sx() (is_cpu_type(MXC_CPU_MX6SX))
+#define is_mx6sl() (is_cpu_type(MXC_CPU_MX6SL))
+#define is_mx6solo() (is_cpu_type(MXC_CPU_MX6SOLO))
+#define is_mx6ul() (is_cpu_type(MXC_CPU_MX6UL))
+#define is_mx6ull() (is_cpu_type(MXC_CPU_MX6ULL) || is_cpu_type(MXC_CPU_MX6ULZ))
+#define is_mx6ulz() (is_cpu_type(MXC_CPU_MX6ULZ))
+#define is_mx6sll() (is_cpu_type(MXC_CPU_MX6SLL))
+
+#define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP))
+
+#define is_imx8mq() (is_cpu_type(MXC_CPU_IMX8MQ) || is_cpu_type(MXC_CPU_IMX8MD) || is_cpu_type(MXC_CPU_IMX8MQL))
+#define is_imx8md() (is_cpu_type(MXC_CPU_IMX8MD))
+#define is_imx8mql() (is_cpu_type(MXC_CPU_IMX8MQL))
+#define is_imx8qm() (is_cpu_type(MXC_CPU_IMX8QM))
+#define is_imx8mm() (is_cpu_type(MXC_CPU_IMX8MM) || is_cpu_type(MXC_CPU_IMX8MML) ||\
+	is_cpu_type(MXC_CPU_IMX8MMD) || is_cpu_type(MXC_CPU_IMX8MMDL) || \
+	is_cpu_type(MXC_CPU_IMX8MMS) || is_cpu_type(MXC_CPU_IMX8MMSL))
+#define is_imx8mml() (is_cpu_type(MXC_CPU_IMX8MML))
+#define is_imx8mmd() (is_cpu_type(MXC_CPU_IMX8MMD))
+#define is_imx8mmdl() (is_cpu_type(MXC_CPU_IMX8MMDL))
+#define is_imx8mms() (is_cpu_type(MXC_CPU_IMX8MMS))
+#define is_imx8mmsl() (is_cpu_type(MXC_CPU_IMX8MMSL))
+#define is_imx8mn() (is_cpu_type(MXC_CPU_IMX8MN) || is_cpu_type(MXC_CPU_IMX8MND) || \
+	is_cpu_type(MXC_CPU_IMX8MNS) || is_cpu_type(MXC_CPU_IMX8MNL) || \
+	is_cpu_type(MXC_CPU_IMX8MNDL) || is_cpu_type(MXC_CPU_IMX8MNSL) || \
+	is_cpu_type(MXC_CPU_IMX8MNUD) || is_cpu_type(MXC_CPU_IMX8MNUS) || is_cpu_type(MXC_CPU_IMX8MNUQ))
+#define is_imx8mnd() (is_cpu_type(MXC_CPU_IMX8MND))
+#define is_imx8mns() (is_cpu_type(MXC_CPU_IMX8MNS))
+#define is_imx8mnl() (is_cpu_type(MXC_CPU_IMX8MNL))
+#define is_imx8mndl() (is_cpu_type(MXC_CPU_IMX8MNDL))
+#define is_imx8mnsl() (is_cpu_type(MXC_CPU_IMX8MNSL))
+#define is_imx8mnuq() (is_cpu_type(MXC_CPU_IMX8MNUQ))
+#define is_imx8mnud() (is_cpu_type(MXC_CPU_IMX8MNUD))
+#define is_imx8mnus() (is_cpu_type(MXC_CPU_IMX8MNUS))
+#define is_imx8mp() (is_cpu_type(MXC_CPU_IMX8MP)  || is_cpu_type(MXC_CPU_IMX8MPD) || \
+	is_cpu_type(MXC_CPU_IMX8MPL) || is_cpu_type(MXC_CPU_IMX8MP6))
+#define is_imx8mpd() (is_cpu_type(MXC_CPU_IMX8MPD))
+#define is_imx8mpl() (is_cpu_type(MXC_CPU_IMX8MPL))
+#define is_imx8mp6() (is_cpu_type(MXC_CPU_IMX8MP6))
+
+#define is_imx8qxp() (is_cpu_type(MXC_CPU_IMX8QXP))
+
+#define is_imxrt1020() (is_cpu_type(MXC_CPU_IMXRT1020))
+#define is_imxrt1050() (is_cpu_type(MXC_CPU_IMXRT1050))
+
+#ifdef CONFIG_MX6
+#define IMX6_SRC_GPR10_BMODE			BIT(28)
+#define IMX6_SRC_GPR10_PERSIST_SECONDARY_BOOT	BIT(30)
+
+#define IMX6_BMODE_MASK			GENMASK(7, 0)
+#define	IMX6_BMODE_SHIFT		4
+#define IMX6_BMODE_EMI_MASK		BIT(3)
+#define IMX6_BMODE_EMI_SHIFT		3
+#define IMX6_BMODE_SERIAL_ROM_MASK	GENMASK(26, 24)
+#define IMX6_BMODE_SERIAL_ROM_SHIFT	24
+
+enum imx6_bmode_serial_rom {
+	IMX6_BMODE_ECSPI1,
+	IMX6_BMODE_ECSPI2,
+	IMX6_BMODE_ECSPI3,
+	IMX6_BMODE_ECSPI4,
+	IMX6_BMODE_ECSPI5,
+	IMX6_BMODE_I2C1,
+	IMX6_BMODE_I2C2,
+	IMX6_BMODE_I2C3,
+};
+
+enum imx6_bmode_emi {
+	IMX6_BMODE_NOR,
+	IMX6_BMODE_ONENAND,
+};
+
+enum imx6_bmode {
+	IMX6_BMODE_EMI,
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+	IMX6_BMODE_QSPI,
+	IMX6_BMODE_RESERVED,
+#else
+	IMX6_BMODE_RESERVED,
+	IMX6_BMODE_SATA,
+#endif
+	IMX6_BMODE_SERIAL_ROM,
+	IMX6_BMODE_SD,
+	IMX6_BMODE_ESD,
+	IMX6_BMODE_MMC,
+	IMX6_BMODE_EMMC,
+	IMX6_BMODE_NAND_MIN,
+	IMX6_BMODE_NAND_MAX = 0xf,
+};
+
+u32 imx6_src_get_boot_mode(void);
+void gpr_init(void);
+
+#endif /* CONFIG_MX6 */
+
+#ifdef CONFIG_MX7
+#define IMX7_SRC_GPR10_BMODE			BIT(28)
+#define IMX7_SRC_GPR10_PERSIST_SECONDARY_BOOT	BIT(30)
+#endif
+
+/* address translation table */
+struct rproc_att {
+	u32 da; /* device address (From Cortex M4 view) */
+	u32 sa; /* system bus address */
+	u32 size; /* size of reg range */
+};
+
+#ifdef CONFIG_IMX8M
+struct rom_api {
+	u16 ver;
+	u16 tag;
+	u32 reserved1;
+	u32 (*download_image)(u8 *dest, u32 offset, u32 size,  u32 xor);
+	u32 (*query_boot_infor)(u32 info_type, u32 *info, u32 xor);
+};
+
+enum boot_dev_type_e {
+	BT_DEV_TYPE_SD = 1,
+	BT_DEV_TYPE_MMC = 2,
+	BT_DEV_TYPE_NAND = 3,
+	BT_DEV_TYPE_FLEXSPINOR = 4,
+
+	BT_DEV_TYPE_USB = 0xE,
+	BT_DEV_TYPE_MEM_DEV = 0xF,
+
+	BT_DEV_TYPE_INVALID = 0xFF
+};
+
+#define QUERY_ROM_VER		1
+#define QUERY_BT_DEV		2
+#define QUERY_PAGE_SZ		3
+#define QUERY_IVT_OFF		4
+#define QUERY_BT_STAGE		5
+#define QUERY_IMG_OFF		6
+
+#define ROM_API_OKAY		0xF0
+
+extern struct rom_api *g_rom_api;
+#endif
+
+u32 get_nr_cpus(void);
+u32 get_cpu_rev(void);
+u32 get_cpu_speed_grade_hz(void);
+u32 get_cpu_temp_grade(int *minc, int *maxc);
+const char *get_imx_type(u32 imxtype);
+u32 imx_ddr_size(void);
+void sdelay(unsigned long);
+void set_chipselect_size(int const);
+
+void init_aips(void);
+void init_src(void);
+void init_snvs(void);
+void imx_wdog_disable_powerdown(void);
+
+void board_mem_get_layout(u64 *phys_sdram_1_start,
+			  u64 *phys_sdram_1_size,
+			  u64 *phys_sdram_2_start,
+			  u64 *phys_sdram_2_size);
+
+int arch_auxiliary_core_check_up(u32 core_id);
+
+int board_mmc_get_env_dev(int devno);
+
+int nxp_board_rev(void);
+char nxp_board_rev_string(void);
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int fecmxc_initialize(struct bd_info *bis);
+u32 get_ahb_clk(void);
+u32 get_periph_clk(void);
+
+void lcdif_power_down(void);
+
+int mxs_reset_block(struct mxs_register_32 *reg);
+int mxs_wait_mask_set(struct mxs_register_32 *reg, u32 mask, u32 timeout);
+int mxs_wait_mask_clr(struct mxs_register_32 *reg, u32 mask, u32 timeout);
+
+unsigned long call_imx_sip(unsigned long id, unsigned long reg0,
+			   unsigned long reg1, unsigned long reg2,
+			   unsigned long reg3);
+unsigned long call_imx_sip_ret2(unsigned long id, unsigned long reg0,
+				unsigned long *reg1, unsigned long reg2,
+				unsigned long reg3);
+
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/syscounter.h b/roms/u-boot/arch/arm/include/asm/mach-imx/syscounter.h
new file mode 100644
index 000000000..a2cae1edb
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/syscounter.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _ASM_ARCH_SYSTEM_COUNTER_H
+#define _ASM_ARCH_SYSTEM_COUNTER_H
+
+/* System Counter */
+struct sctr_regs {
+	u32 cntcr;
+	u32 cntsr;
+	u32 cntcv1;
+	u32 cntcv2;
+	u32 resv1[4];
+	u32 cntfid0;
+	u32 cntfid1;
+	u32 cntfid2;
+	u32 resv2[1001];
+	u32 counterid[1];
+};
+
+#define SC_CNTCR_ENABLE		(1 << 0)
+#define SC_CNTCR_HDBG		(1 << 1)
+#define SC_CNTCR_FREQ0		(1 << 8)
+#define SC_CNTCR_FREQ1		(1 << 9)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-imx/video.h b/roms/u-boot/arch/arm/include/asm/mach-imx/video.h
new file mode 100644
index 000000000..d1a14ad7d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-imx/video.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __IMX_VIDEO_H_
+#define __IMX_VIDEO_H_
+
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+struct display_info_t {
+	int	bus;
+	int	addr;
+	int	pixfmt;
+	int	di;
+	int	(*detect)(struct display_info_t const *dev);
+	void	(*enable)(struct display_info_t const *dev);
+	struct	fb_videomode mode;
+};
+
+#ifdef CONFIG_IMX_HDMI
+extern int detect_hdmi(struct display_info_t const *dev);
+#endif
+
+#ifdef CONFIG_IMX_VIDEO_SKIP
+extern struct display_info_t const displays[];
+extern size_t display_count;
+#endif
+
+int ipu_set_ldb_clock(int rate);
+int ipu_displays_init(void);
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/mach-types.h b/roms/u-boot/arch/arm/include/asm/mach-types.h
new file mode 100644
index 000000000..32532b3ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mach-types.h
@@ -0,0 +1,5054 @@
+/*
+ * This was automagically generated from arch/arm/tools/mach-types!
+ * Do NOT edit
+ */
+
+#ifndef __ASM_ARM_MACH_TYPE_H
+#define __ASM_ARM_MACH_TYPE_H
+
+/* see arch/arm/kernel/arch.c for a description of these */
+#define MACH_TYPE_EBSA110              0
+#define MACH_TYPE_RISCPC               1
+#define MACH_TYPE_NEXUSPCI             3
+#define MACH_TYPE_EBSA285              4
+#define MACH_TYPE_NETWINDER            5
+#define MACH_TYPE_CATS                 6
+#define MACH_TYPE_TBOX                 7
+#define MACH_TYPE_CO285                8
+#define MACH_TYPE_CLPS7110             9
+#define MACH_TYPE_ARCHIMEDES           10
+#define MACH_TYPE_A5K                  11
+#define MACH_TYPE_ETOILE               12
+#define MACH_TYPE_LACIE_NAS            13
+#define MACH_TYPE_CLPS7500             14
+#define MACH_TYPE_SHARK                15
+#define MACH_TYPE_BRUTUS               16
+#define MACH_TYPE_PERSONAL_SERVER      17
+#define MACH_TYPE_ITSY                 18
+#define MACH_TYPE_L7200                19
+#define MACH_TYPE_PLEB                 20
+#define MACH_TYPE_INTEGRATOR           21
+#define MACH_TYPE_H3600                22
+#define MACH_TYPE_IXP1200              23
+#define MACH_TYPE_P720T                24
+#define MACH_TYPE_ASSABET              25
+#define MACH_TYPE_VICTOR               26
+#define MACH_TYPE_LART                 27
+#define MACH_TYPE_RANGER               28
+#define MACH_TYPE_GRAPHICSCLIENT       29
+#define MACH_TYPE_XP860                30
+#define MACH_TYPE_CERF                 31
+#define MACH_TYPE_NANOENGINE           32
+#define MACH_TYPE_FPIC                 33
+#define MACH_TYPE_EXTENEX1             34
+#define MACH_TYPE_SHERMAN              35
+#define MACH_TYPE_ACCELENT_SA          36
+#define MACH_TYPE_ACCELENT_L7200       37
+#define MACH_TYPE_NETPORT              38
+#define MACH_TYPE_PANGOLIN             39
+#define MACH_TYPE_YOPY                 40
+#define MACH_TYPE_COOLIDGE             41
+#define MACH_TYPE_HUW_WEBPANEL         42
+#define MACH_TYPE_SPOTME               43
+#define MACH_TYPE_FREEBIRD             44
+#define MACH_TYPE_TI925                45
+#define MACH_TYPE_RISCSTATION          46
+#define MACH_TYPE_CAVY                 47
+#define MACH_TYPE_JORNADA720           48
+#define MACH_TYPE_OMNIMETER            49
+#define MACH_TYPE_EDB7211              50
+#define MACH_TYPE_CITYGO               51
+#define MACH_TYPE_PFS168               52
+#define MACH_TYPE_SPOT                 53
+#define MACH_TYPE_FLEXANET             54
+#define MACH_TYPE_WEBPAL               55
+#define MACH_TYPE_LINPDA               56
+#define MACH_TYPE_ANAKIN               57
+#define MACH_TYPE_MVI                  58
+#define MACH_TYPE_JUPITER              59
+#define MACH_TYPE_PSIONW               60
+#define MACH_TYPE_ALN                  61
+#define MACH_TYPE_CAMELOT              62
+#define MACH_TYPE_GDS2200              63
+#define MACH_TYPE_PSION_SERIES7        64
+#define MACH_TYPE_XFILE                65
+#define MACH_TYPE_ACCELENT_EP9312      66
+#define MACH_TYPE_IC200                67
+#define MACH_TYPE_CREDITLART           68
+#define MACH_TYPE_HTM                  69
+#define MACH_TYPE_IQ80310              70
+#define MACH_TYPE_FREEBOT              71
+#define MACH_TYPE_ENTEL                72
+#define MACH_TYPE_ENP3510              73
+#define MACH_TYPE_TRIZEPS              74
+#define MACH_TYPE_NESA                 75
+#define MACH_TYPE_VENUS                76
+#define MACH_TYPE_TARDIS               77
+#define MACH_TYPE_MERCURY              78
+#define MACH_TYPE_EMPEG                79
+#define MACH_TYPE_I80200FCC            80
+#define MACH_TYPE_ITT_CPB              81
+#define MACH_TYPE_SVC                  82
+#define MACH_TYPE_ALPHA2               84
+#define MACH_TYPE_ALPHA1               85
+#define MACH_TYPE_NETARM               86
+#define MACH_TYPE_SIMPAD               87
+#define MACH_TYPE_PDA1                 88
+#define MACH_TYPE_LUBBOCK              89
+#define MACH_TYPE_ANIKO                90
+#define MACH_TYPE_CLEP7212             91
+#define MACH_TYPE_CS89712              92
+#define MACH_TYPE_WEARARM              93
+#define MACH_TYPE_POSSIO_PX            94
+#define MACH_TYPE_SIDEARM              95
+#define MACH_TYPE_STORK                96
+#define MACH_TYPE_SHANNON              97
+#define MACH_TYPE_ACE                  98
+#define MACH_TYPE_BALLYARM             99
+#define MACH_TYPE_SIMPUTER             100
+#define MACH_TYPE_NEXTERM              101
+#define MACH_TYPE_SA1100_ELF           102
+#define MACH_TYPE_GATOR                103
+#define MACH_TYPE_GRANITE              104
+#define MACH_TYPE_CONSUS               105
+#define MACH_TYPE_AAED2000             106
+#define MACH_TYPE_CDB89712             107
+#define MACH_TYPE_GRAPHICSMASTER       108
+#define MACH_TYPE_ADSBITSY             109
+#define MACH_TYPE_PXA_IDP              110
+#define MACH_TYPE_PLCE                 111
+#define MACH_TYPE_PT_SYSTEM3           112
+#define MACH_TYPE_MEDALB               113
+#define MACH_TYPE_EAGLE                114
+#define MACH_TYPE_DSC21                115
+#define MACH_TYPE_DSC24                116
+#define MACH_TYPE_TI5472               117
+#define MACH_TYPE_AUTCPU12             118
+#define MACH_TYPE_UENGINE              119
+#define MACH_TYPE_BLUESTEM             120
+#define MACH_TYPE_XINGU8               121
+#define MACH_TYPE_BUSHSTB              122
+#define MACH_TYPE_EPSILON1             123
+#define MACH_TYPE_BALLOON              124
+#define MACH_TYPE_PUPPY                125
+#define MACH_TYPE_ELROY                126
+#define MACH_TYPE_GMS720               127
+#define MACH_TYPE_S24X                 128
+#define MACH_TYPE_JTEL_CLEP7312        129
+#define MACH_TYPE_CX821XX              130
+#define MACH_TYPE_EDB7312              131
+#define MACH_TYPE_BSA1110              132
+#define MACH_TYPE_POWERPIN             133
+#define MACH_TYPE_OPENARM              134
+#define MACH_TYPE_WHITECHAPEL          135
+#define MACH_TYPE_H3100                136
+#define MACH_TYPE_H3800                137
+#define MACH_TYPE_BLUE_V1              138
+#define MACH_TYPE_PXA_CERF             139
+#define MACH_TYPE_ARM7TEVB             140
+#define MACH_TYPE_D7400                141
+#define MACH_TYPE_PIRANHA              142
+#define MACH_TYPE_SBCAMELOT            143
+#define MACH_TYPE_KINGS                144
+#define MACH_TYPE_SMDK2400             145
+#define MACH_TYPE_COLLIE               146
+#define MACH_TYPE_IDR                  147
+#define MACH_TYPE_BADGE4               148
+#define MACH_TYPE_WEBNET               149
+#define MACH_TYPE_D7300                150
+#define MACH_TYPE_CEP                  151
+#define MACH_TYPE_FORTUNET             152
+#define MACH_TYPE_VC547X               153
+#define MACH_TYPE_FILEWALKER           154
+#define MACH_TYPE_NETGATEWAY           155
+#define MACH_TYPE_SYMBOL2800           156
+#define MACH_TYPE_SUNS                 157
+#define MACH_TYPE_FRODO                158
+#define MACH_TYPE_MACH_TYTE_MS301      159
+#define MACH_TYPE_MX1ADS               160
+#define MACH_TYPE_H7201                161
+#define MACH_TYPE_H7202                162
+#define MACH_TYPE_AMICO                163
+#define MACH_TYPE_IAM                  164
+#define MACH_TYPE_TT530                165
+#define MACH_TYPE_SAM2400              166
+#define MACH_TYPE_JORNADA56X           167
+#define MACH_TYPE_ACTIVE               168
+#define MACH_TYPE_IQ80321              169
+#define MACH_TYPE_WID                  170
+#define MACH_TYPE_SABINAL              171
+#define MACH_TYPE_IXP425_MATACUMBE     172
+#define MACH_TYPE_MINIPRINT            173
+#define MACH_TYPE_ADM510X              174
+#define MACH_TYPE_SVS200               175
+#define MACH_TYPE_ATG_TCU              176
+#define MACH_TYPE_JORNADA820           177
+#define MACH_TYPE_S3C44B0              178
+#define MACH_TYPE_MARGIS2              179
+#define MACH_TYPE_KS8695               180
+#define MACH_TYPE_BRH                  181
+#define MACH_TYPE_S3C2410              182
+#define MACH_TYPE_POSSIO_PX30          183
+#define MACH_TYPE_S3C2800              184
+#define MACH_TYPE_FLEETWOOD            185
+#define MACH_TYPE_OMAHA                186
+#define MACH_TYPE_TA7                  187
+#define MACH_TYPE_NOVA                 188
+#define MACH_TYPE_HMK                  189
+#define MACH_TYPE_KARO                 190
+#define MACH_TYPE_FESTER               191
+#define MACH_TYPE_GPI                  192
+#define MACH_TYPE_SMDK2410             193
+#define MACH_TYPE_I519                 194
+#define MACH_TYPE_NEXIO                195
+#define MACH_TYPE_BITBOX               196
+#define MACH_TYPE_G200                 197
+#define MACH_TYPE_GILL                 198
+#define MACH_TYPE_PXA_MERCURY          199
+#define MACH_TYPE_CEIVA                200
+#define MACH_TYPE_FRET                 201
+#define MACH_TYPE_EMAILPHONE           202
+#define MACH_TYPE_H3900                203
+#define MACH_TYPE_PXA1                 204
+#define MACH_TYPE_KOAN369              205
+#define MACH_TYPE_COGENT               206
+#define MACH_TYPE_ESL_SIMPUTER         207
+#define MACH_TYPE_ESL_SIMPUTER_CLR     208
+#define MACH_TYPE_ESL_SIMPUTER_BW      209
+#define MACH_TYPE_HHP_CRADLE           210
+#define MACH_TYPE_HE500                211
+#define MACH_TYPE_INHANDELF2           212
+#define MACH_TYPE_INHANDFTIP           213
+#define MACH_TYPE_DNP1110              214
+#define MACH_TYPE_PNP1110              215
+#define MACH_TYPE_CSB226               216
+#define MACH_TYPE_ARNOLD               217
+#define MACH_TYPE_VOICEBLUE            218
+#define MACH_TYPE_JZ8028               219
+#define MACH_TYPE_H5400                220
+#define MACH_TYPE_FORTE                221
+#define MACH_TYPE_ACAM                 222
+#define MACH_TYPE_ABOX                 223
+#define MACH_TYPE_ATMEL                224
+#define MACH_TYPE_SITSANG              225
+#define MACH_TYPE_CPU1110LCDNET        226
+#define MACH_TYPE_MPL_VCMA9            227
+#define MACH_TYPE_OPUS_A1              228
+#define MACH_TYPE_DAYTONA              229
+#define MACH_TYPE_KILLBEAR             230
+#define MACH_TYPE_YOHO                 231
+#define MACH_TYPE_JASPER               232
+#define MACH_TYPE_DSC25                233
+#define MACH_TYPE_OMAP_INNOVATOR       234
+#define MACH_TYPE_RAMSES               235
+#define MACH_TYPE_S28X                 236
+#define MACH_TYPE_MPORT3               237
+#define MACH_TYPE_PXA_EAGLE250         238
+#define MACH_TYPE_PDB                  239
+#define MACH_TYPE_BLUE_2G              240
+#define MACH_TYPE_BLUEARCH             241
+#define MACH_TYPE_IXDP2400             242
+#define MACH_TYPE_IXDP2800             243
+#define MACH_TYPE_EXPLORER             244
+#define MACH_TYPE_IXDP425              245
+#define MACH_TYPE_CHIMP                246
+#define MACH_TYPE_STORK_NEST           247
+#define MACH_TYPE_STORK_EGG            248
+#define MACH_TYPE_WISMO                249
+#define MACH_TYPE_EZLINX               250
+#define MACH_TYPE_AT91RM9200           251
+#define MACH_TYPE_ADTECH_ORION         252
+#define MACH_TYPE_NEPTUNE              253
+#define MACH_TYPE_HACKKIT              254
+#define MACH_TYPE_PXA_WINS30           255
+#define MACH_TYPE_LAVINNA              256
+#define MACH_TYPE_PXA_UENGINE          257
+#define MACH_TYPE_INNOKOM              258
+#define MACH_TYPE_BMS                  259
+#define MACH_TYPE_IXCDP1100            260
+#define MACH_TYPE_PRPMC1100            261
+#define MACH_TYPE_AT91RM9200DK         262
+#define MACH_TYPE_ARMSTICK             263
+#define MACH_TYPE_ARMONIE              264
+#define MACH_TYPE_MPORT1               265
+#define MACH_TYPE_S3C5410              266
+#define MACH_TYPE_ZCP320A              267
+#define MACH_TYPE_I_BOX                268
+#define MACH_TYPE_STLC1502             269
+#define MACH_TYPE_SIREN                270
+#define MACH_TYPE_GREENLAKE            271
+#define MACH_TYPE_ARGUS                272
+#define MACH_TYPE_COMBADGE             273
+#define MACH_TYPE_ROKEPXA              274
+#define MACH_TYPE_CINTEGRATOR          275
+#define MACH_TYPE_GUIDEA07             276
+#define MACH_TYPE_TAT257               277
+#define MACH_TYPE_IGP2425              278
+#define MACH_TYPE_BLUEGRAMMA           279
+#define MACH_TYPE_IPOD                 280
+#define MACH_TYPE_ADSBITSYX            281
+#define MACH_TYPE_TRIZEPS2             282
+#define MACH_TYPE_VIPER                283
+#define MACH_TYPE_ADSBITSYPLUS         284
+#define MACH_TYPE_ADSAGC               285
+#define MACH_TYPE_STP7312              286
+#define MACH_TYPE_NX_PHNX              287
+#define MACH_TYPE_WEP_EP250            288
+#define MACH_TYPE_INHANDELF3           289
+#define MACH_TYPE_ADI_COYOTE           290
+#define MACH_TYPE_IYONIX               291
+#define MACH_TYPE_DAMICAM_SA1110       292
+#define MACH_TYPE_MEG03                293
+#define MACH_TYPE_PXA_WHITECHAPEL      294
+#define MACH_TYPE_NWSC                 295
+#define MACH_TYPE_NWLARM               296
+#define MACH_TYPE_IXP425_MGUARD        297
+#define MACH_TYPE_PXA_NETDCU4          298
+#define MACH_TYPE_IXDP2401             299
+#define MACH_TYPE_IXDP2801             300
+#define MACH_TYPE_ZODIAC               301
+#define MACH_TYPE_ARMMODUL             302
+#define MACH_TYPE_KETOP                303
+#define MACH_TYPE_AV7200               304
+#define MACH_TYPE_ARCH_TI925           305
+#define MACH_TYPE_ACQ200               306
+#define MACH_TYPE_PT_DAFIT             307
+#define MACH_TYPE_IHBA                 308
+#define MACH_TYPE_QUINQUE              309
+#define MACH_TYPE_NIMBRAONE            310
+#define MACH_TYPE_NIMBRA29X            311
+#define MACH_TYPE_NIMBRA210            312
+#define MACH_TYPE_HHP_D95XX            313
+#define MACH_TYPE_LABARM               314
+#define MACH_TYPE_M825XX               315
+#define MACH_TYPE_M7100                316
+#define MACH_TYPE_NIPC2                317
+#define MACH_TYPE_FU7202               318
+#define MACH_TYPE_ADSAGX               319
+#define MACH_TYPE_PXA_POOH             320
+#define MACH_TYPE_BANDON               321
+#define MACH_TYPE_PCM7210              322
+#define MACH_TYPE_NMS9200              323
+#define MACH_TYPE_LOGODL               324
+#define MACH_TYPE_M7140                325
+#define MACH_TYPE_KOREBOT              326
+#define MACH_TYPE_IQ31244              327
+#define MACH_TYPE_KOAN393              328
+#define MACH_TYPE_INHANDFTIP3          329
+#define MACH_TYPE_GONZO                330
+#define MACH_TYPE_BAST                 331
+#define MACH_TYPE_SCANPASS             332
+#define MACH_TYPE_EP7312_POOH          333
+#define MACH_TYPE_TA7S                 334
+#define MACH_TYPE_TA7V                 335
+#define MACH_TYPE_ICARUS               336
+#define MACH_TYPE_H1900                337
+#define MACH_TYPE_GEMINI               338
+#define MACH_TYPE_AXIM                 339
+#define MACH_TYPE_AUDIOTRON            340
+#define MACH_TYPE_H2200                341
+#define MACH_TYPE_LOOX600              342
+#define MACH_TYPE_NIOP                 343
+#define MACH_TYPE_DM310                344
+#define MACH_TYPE_SEEDPXA_C2           345
+#define MACH_TYPE_IXP4XX_MGUARD_PCI    346
+#define MACH_TYPE_H1940                347
+#define MACH_TYPE_SCORPIO              348
+#define MACH_TYPE_VIVA                 349
+#define MACH_TYPE_PXA_XCARD            350
+#define MACH_TYPE_CSB335               351
+#define MACH_TYPE_IXRD425              352
+#define MACH_TYPE_IQ80315              353
+#define MACH_TYPE_NMP7312              354
+#define MACH_TYPE_CX861XX              355
+#define MACH_TYPE_ENP2611              356
+#define MACH_TYPE_XDA                  357
+#define MACH_TYPE_CSIR_IMS             358
+#define MACH_TYPE_IXP421_DNAEETH       359
+#define MACH_TYPE_POCKETSERV9200       360
+#define MACH_TYPE_TOTO                 361
+#define MACH_TYPE_S3C2440              362
+#define MACH_TYPE_KS8695P              363
+#define MACH_TYPE_SE4000               364
+#define MACH_TYPE_QUADRICEPS           365
+#define MACH_TYPE_BRONCO               366
+#define MACH_TYPE_ESL_WIRELESS_TAB     367
+#define MACH_TYPE_ESL_SOFCOMP          368
+#define MACH_TYPE_S5C7375              369
+#define MACH_TYPE_SPEARHEAD            370
+#define MACH_TYPE_PANTERA              371
+#define MACH_TYPE_PRAYOGLITE           372
+#define MACH_TYPE_GUMSTIX              373
+#define MACH_TYPE_RCUBE                374
+#define MACH_TYPE_REA_OLV              375
+#define MACH_TYPE_PXA_IPHONE           376
+#define MACH_TYPE_S3C3410              377
+#define MACH_TYPE_ESPD_4510B           378
+#define MACH_TYPE_MP1X                 379
+#define MACH_TYPE_AT91RM9200TB         380
+#define MACH_TYPE_ADSVGX               381
+#define MACH_TYPE_OMAP_H2              382
+#define MACH_TYPE_PELEE                383
+#define MACH_TYPE_E740                 384
+#define MACH_TYPE_IQ80331              385
+#define MACH_TYPE_VERSATILE_PB         387
+#define MACH_TYPE_KEV7A400             388
+#define MACH_TYPE_LPD7A400             389
+#define MACH_TYPE_LPD7A404             390
+#define MACH_TYPE_FUJITSU_CAMELOT      391
+#define MACH_TYPE_JANUS2M              392
+#define MACH_TYPE_EMBTF                393
+#define MACH_TYPE_HPM                  394
+#define MACH_TYPE_SMDK2410TK           395
+#define MACH_TYPE_SMDK2410AJ           396
+#define MACH_TYPE_STREETRACER          397
+#define MACH_TYPE_EFRAME               398
+#define MACH_TYPE_CSB337               399
+#define MACH_TYPE_PXA_LARK             400
+#define MACH_TYPE_PNP2110              401
+#define MACH_TYPE_TCC72X               402
+#define MACH_TYPE_ALTAIR               403
+#define MACH_TYPE_KC3                  404
+#define MACH_TYPE_SINTEFTD             405
+#define MACH_TYPE_MAINSTONE            406
+#define MACH_TYPE_ADAY4X               407
+#define MACH_TYPE_LITE300              408
+#define MACH_TYPE_S5C7376              409
+#define MACH_TYPE_MT02                 410
+#define MACH_TYPE_MPORT3S              411
+#define MACH_TYPE_RA_ALPHA             412
+#define MACH_TYPE_XCEP                 413
+#define MACH_TYPE_ARCOM_VULCAN         414
+#define MACH_TYPE_STARGATE             415
+#define MACH_TYPE_ARMADILLOJ           416
+#define MACH_TYPE_ELROY_JACK           417
+#define MACH_TYPE_BACKEND              418
+#define MACH_TYPE_S5LINBOX             419
+#define MACH_TYPE_NOMADIK              420
+#define MACH_TYPE_IA_CPU_9200          421
+#define MACH_TYPE_AT91_BJA1            422
+#define MACH_TYPE_CORGI                423
+#define MACH_TYPE_POODLE               424
+#define MACH_TYPE_TEN                  425
+#define MACH_TYPE_ROVERP5P             426
+#define MACH_TYPE_SC2700               427
+#define MACH_TYPE_EX_EAGLE             428
+#define MACH_TYPE_NX_PXA12             429
+#define MACH_TYPE_NX_PXA5              430
+#define MACH_TYPE_BLACKBOARD2          431
+#define MACH_TYPE_I819                 432
+#define MACH_TYPE_IXMB995E             433
+#define MACH_TYPE_SKYRIDER             434
+#define MACH_TYPE_SKYHAWK              435
+#define MACH_TYPE_ENTERPRISE           436
+#define MACH_TYPE_DEP2410              437
+#define MACH_TYPE_ARMCORE              438
+#define MACH_TYPE_HOBBIT               439
+#define MACH_TYPE_H7210                440
+#define MACH_TYPE_PXA_NETDCU5          441
+#define MACH_TYPE_ACC                  442
+#define MACH_TYPE_ESL_SARVA            443
+#define MACH_TYPE_XM250                444
+#define MACH_TYPE_T6TC1XB              445
+#define MACH_TYPE_ESS710               446
+#define MACH_TYPE_MX31ADS              447
+#define MACH_TYPE_HIMALAYA             448
+#define MACH_TYPE_BOLFENK              449
+#define MACH_TYPE_AT91RM9200KR         450
+#define MACH_TYPE_EDB9312              451
+#define MACH_TYPE_OMAP_GENERIC         452
+#define MACH_TYPE_AXIMX3               453
+#define MACH_TYPE_EB67XDIP             454
+#define MACH_TYPE_WEBTXS               455
+#define MACH_TYPE_HAWK                 456
+#define MACH_TYPE_CCAT91SBC001         457
+#define MACH_TYPE_EXPRESSO             458
+#define MACH_TYPE_H4000                459
+#define MACH_TYPE_DINO                 460
+#define MACH_TYPE_ML675K               461
+#define MACH_TYPE_EDB9301              462
+#define MACH_TYPE_EDB9315              463
+#define MACH_TYPE_RECIVA_TT            464
+#define MACH_TYPE_CSTCB01              465
+#define MACH_TYPE_CSTCB1               466
+#define MACH_TYPE_SHADWELL             467
+#define MACH_TYPE_GOEPEL263            468
+#define MACH_TYPE_ACQ100               469
+#define MACH_TYPE_MX1FS2               470
+#define MACH_TYPE_HIPTOP_G1            471
+#define MACH_TYPE_SPARKY               472
+#define MACH_TYPE_NS9750               473
+#define MACH_TYPE_PHOENIX              474
+#define MACH_TYPE_VR1000               475
+#define MACH_TYPE_DEISTERPXA           476
+#define MACH_TYPE_BCM1160              477
+#define MACH_TYPE_PCM022               478
+#define MACH_TYPE_ADSGCX               479
+#define MACH_TYPE_DREADNAUGHT          480
+#define MACH_TYPE_DM320                481
+#define MACH_TYPE_MARKOV               482
+#define MACH_TYPE_COS7A400             483
+#define MACH_TYPE_MILANO               484
+#define MACH_TYPE_UE9328               485
+#define MACH_TYPE_UEX255               486
+#define MACH_TYPE_UE2410               487
+#define MACH_TYPE_A620                 488
+#define MACH_TYPE_OCELOT               489
+#define MACH_TYPE_CHEETAH              490
+#define MACH_TYPE_OMAP_PERSEUS2        491
+#define MACH_TYPE_ZVUE                 492
+#define MACH_TYPE_ROVERP1              493
+#define MACH_TYPE_ASIDIAL2             494
+#define MACH_TYPE_S3C24A0              495
+#define MACH_TYPE_E800                 496
+#define MACH_TYPE_E750                 497
+#define MACH_TYPE_S3C5500              498
+#define MACH_TYPE_SMDK5500             499
+#define MACH_TYPE_SIGNALSYNC           500
+#define MACH_TYPE_NBC                  501
+#define MACH_TYPE_KODIAK               502
+#define MACH_TYPE_NETBOOKPRO           503
+#define MACH_TYPE_HW90200              504
+#define MACH_TYPE_CONDOR               505
+#define MACH_TYPE_CUP                  506
+#define MACH_TYPE_KITE                 507
+#define MACH_TYPE_SCB9328              508
+#define MACH_TYPE_OMAP_H3              509
+#define MACH_TYPE_OMAP_H4              510
+#define MACH_TYPE_N10                  511
+#define MACH_TYPE_MONTAJADE            512
+#define MACH_TYPE_SG560                513
+#define MACH_TYPE_DP1000               514
+#define MACH_TYPE_OMAP_OSK             515
+#define MACH_TYPE_RG100V3              516
+#define MACH_TYPE_MX2ADS               517
+#define MACH_TYPE_PXA_KILO             518
+#define MACH_TYPE_IXP4XX_EAGLE         519
+#define MACH_TYPE_TOSA                 520
+#define MACH_TYPE_MB2520F              521
+#define MACH_TYPE_EMC1000              522
+#define MACH_TYPE_TIDSC25              523
+#define MACH_TYPE_AKCPMXL              524
+#define MACH_TYPE_AV3XX                525
+#define MACH_TYPE_AVILA                526
+#define MACH_TYPE_PXA_MPM10            527
+#define MACH_TYPE_PXA_KYANITE          528
+#define MACH_TYPE_SGOLD                529
+#define MACH_TYPE_OSCAR                530
+#define MACH_TYPE_EPXA4USB2            531
+#define MACH_TYPE_XSENGINE             532
+#define MACH_TYPE_IP600                533
+#define MACH_TYPE_MCAN2                534
+#define MACH_TYPE_DDI_BLUERIDGE        535
+#define MACH_TYPE_SKYMINDER            536
+#define MACH_TYPE_LPD79520             537
+#define MACH_TYPE_EDB9302              538
+#define MACH_TYPE_HW90340              539
+#define MACH_TYPE_CIP_BOX              540
+#define MACH_TYPE_IVPN                 541
+#define MACH_TYPE_RSOC2                542
+#define MACH_TYPE_HUSKY                543
+#define MACH_TYPE_BOXER                544
+#define MACH_TYPE_SHEPHERD             545
+#define MACH_TYPE_AML42800AA           546
+#define MACH_TYPE_LPC2294              548
+#define MACH_TYPE_SWITCHGRASS          549
+#define MACH_TYPE_ENS_CMU              550
+#define MACH_TYPE_MM6_SDB              551
+#define MACH_TYPE_SATURN               552
+#define MACH_TYPE_I30030EVB            553
+#define MACH_TYPE_MXC27530EVB          554
+#define MACH_TYPE_SMDK2800             555
+#define MACH_TYPE_MTWILSON             556
+#define MACH_TYPE_ZITI                 557
+#define MACH_TYPE_GRANDFATHER          558
+#define MACH_TYPE_TENGINE              559
+#define MACH_TYPE_S3C2460              560
+#define MACH_TYPE_PDM                  561
+#define MACH_TYPE_H4700                562
+#define MACH_TYPE_H6300                563
+#define MACH_TYPE_RZ1700               564
+#define MACH_TYPE_A716                 565
+#define MACH_TYPE_ESTK2440A            566
+#define MACH_TYPE_ATWIXP425            567
+#define MACH_TYPE_CSB336               568
+#define MACH_TYPE_RIRM2                569
+#define MACH_TYPE_CX23518              570
+#define MACH_TYPE_CX2351X              571
+#define MACH_TYPE_COMPUTIME            572
+#define MACH_TYPE_IZARUS               573
+#define MACH_TYPE_RTS                  574
+#define MACH_TYPE_SE5100               575
+#define MACH_TYPE_S3C2510              576
+#define MACH_TYPE_CSB437TL             577
+#define MACH_TYPE_SLAUSON              578
+#define MACH_TYPE_PEARLRIVER           579
+#define MACH_TYPE_TDC_P210             580
+#define MACH_TYPE_SG580                581
+#define MACH_TYPE_WRSBCARM7            582
+#define MACH_TYPE_IPD                  583
+#define MACH_TYPE_PXA_DNP2110          584
+#define MACH_TYPE_XAENIAX              585
+#define MACH_TYPE_SOMN4250             586
+#define MACH_TYPE_PLEB2                587
+#define MACH_TYPE_CORNWALLIS           588
+#define MACH_TYPE_GURNEY_DRV           589
+#define MACH_TYPE_CHAFFEE              590
+#define MACH_TYPE_RMS101               591
+#define MACH_TYPE_RX3715               592
+#define MACH_TYPE_SWIFT                593
+#define MACH_TYPE_ROVERP7              594
+#define MACH_TYPE_PR818S               595
+#define MACH_TYPE_TRXPRO               596
+#define MACH_TYPE_NSLU2                597
+#define MACH_TYPE_E400                 598
+#define MACH_TYPE_TRAB                 599
+#define MACH_TYPE_CMC_PU2              600
+#define MACH_TYPE_FULCRUM              601
+#define MACH_TYPE_NETGATE42X           602
+#define MACH_TYPE_STR710               603
+#define MACH_TYPE_IXDPG425             604
+#define MACH_TYPE_TOMTOMGO             605
+#define MACH_TYPE_VERSATILE_AB         606
+#define MACH_TYPE_EDB9307              607
+#define MACH_TYPE_SG565                608
+#define MACH_TYPE_LPD79524             609
+#define MACH_TYPE_LPD79525             610
+#define MACH_TYPE_RMS100               611
+#define MACH_TYPE_KB9200               612
+#define MACH_TYPE_SX1                  613
+#define MACH_TYPE_HMS39C7092           614
+#define MACH_TYPE_ARMADILLO            615
+#define MACH_TYPE_IPCU                 616
+#define MACH_TYPE_LOOX720              617
+#define MACH_TYPE_IXDP465              618
+#define MACH_TYPE_IXDP2351             619
+#define MACH_TYPE_ADSVIX               620
+#define MACH_TYPE_DM270                621
+#define MACH_TYPE_SOCLTPLUS            622
+#define MACH_TYPE_ECIA                 623
+#define MACH_TYPE_CM4008               624
+#define MACH_TYPE_P2001                625
+#define MACH_TYPE_MUDSHARK             627
+#define MACH_TYPE_HB2                  628
+#define MACH_TYPE_IQ80332              629
+#define MACH_TYPE_SENDT                630
+#define MACH_TYPE_MX2JAZZ              631
+#define MACH_TYPE_MULTIIO              632
+#define MACH_TYPE_HRDISPLAY            633
+#define MACH_TYPE_MXC27530ADS          634
+#define MACH_TYPE_TRIZEPS3             635
+#define MACH_TYPE_ZEFEERDZA            636
+#define MACH_TYPE_ZEFEERDZB            637
+#define MACH_TYPE_ZEFEERDZG            638
+#define MACH_TYPE_ZEFEERDZN            639
+#define MACH_TYPE_ZEFEERDZQ            640
+#define MACH_TYPE_GTWX5715             641
+#define MACH_TYPE_ASTRO_JACK           643
+#define MACH_TYPE_TIP03                644
+#define MACH_TYPE_A9200EC              645
+#define MACH_TYPE_PNX0105              646
+#define MACH_TYPE_ADCPOECPU            647
+#define MACH_TYPE_CSB637               648
+#define MACH_TYPE_MB9200               650
+#define MACH_TYPE_KULUN                651
+#define MACH_TYPE_SNAPPER              652
+#define MACH_TYPE_OPTIMA               653
+#define MACH_TYPE_DLHSBC               654
+#define MACH_TYPE_X30                  655
+#define MACH_TYPE_N30                  656
+#define MACH_TYPE_MANGA_KS8695         657
+#define MACH_TYPE_AJAX                 658
+#define MACH_TYPE_NEC_MP900            659
+#define MACH_TYPE_VVTK1000             661
+#define MACH_TYPE_KAFA                 662
+#define MACH_TYPE_VVTK3000             663
+#define MACH_TYPE_PIMX1                664
+#define MACH_TYPE_OLLIE                665
+#define MACH_TYPE_SKYMAX               666
+#define MACH_TYPE_JAZZ                 667
+#define MACH_TYPE_TEL_T3               668
+#define MACH_TYPE_AISINO_FCR255        669
+#define MACH_TYPE_BTWEB                670
+#define MACH_TYPE_DBG_LH79520          671
+#define MACH_TYPE_CM41XX               672
+#define MACH_TYPE_TS72XX               673
+#define MACH_TYPE_NGGPXA               674
+#define MACH_TYPE_CSB535               675
+#define MACH_TYPE_CSB536               676
+#define MACH_TYPE_PXA_TRAKPOD          677
+#define MACH_TYPE_PRAXIS               678
+#define MACH_TYPE_LH75411              679
+#define MACH_TYPE_OTOM                 680
+#define MACH_TYPE_NEXCODER_2440        681
+#define MACH_TYPE_LOOX410              682
+#define MACH_TYPE_WESTLAKE             683
+#define MACH_TYPE_NSB                  684
+#define MACH_TYPE_ESL_SARVA_STN        685
+#define MACH_TYPE_ESL_SARVA_TFT        686
+#define MACH_TYPE_ESL_SARVA_IAD        687
+#define MACH_TYPE_ESL_SARVA_ACC        688
+#define MACH_TYPE_TYPHOON              689
+#define MACH_TYPE_CNAV                 690
+#define MACH_TYPE_A730                 691
+#define MACH_TYPE_NETSTAR              692
+#define MACH_TYPE_PHASEFALE_SUPERCON   693
+#define MACH_TYPE_SHIVA1100            694
+#define MACH_TYPE_ETEXSC               695
+#define MACH_TYPE_IXDPG465             696
+#define MACH_TYPE_A9M2410              697
+#define MACH_TYPE_A9M2440              698
+#define MACH_TYPE_A9M9750              699
+#define MACH_TYPE_A9M9360              700
+#define MACH_TYPE_UNC90                701
+#define MACH_TYPE_ECO920               702
+#define MACH_TYPE_SATVIEW              703
+#define MACH_TYPE_ROADRUNNER           704
+#define MACH_TYPE_AT91RM9200EK         705
+#define MACH_TYPE_GP32                 706
+#define MACH_TYPE_GEM                  707
+#define MACH_TYPE_I858                 708
+#define MACH_TYPE_HX2750               709
+#define MACH_TYPE_MXC91131EVB          710
+#define MACH_TYPE_P700                 711
+#define MACH_TYPE_CPE                  712
+#define MACH_TYPE_SPITZ                713
+#define MACH_TYPE_NIMBRA340            714
+#define MACH_TYPE_LPC22XX              715
+#define MACH_TYPE_COMET3               716
+#define MACH_TYPE_COMET4               717
+#define MACH_TYPE_CSB625               718
+#define MACH_TYPE_FORTUNET2            719
+#define MACH_TYPE_S5H2200              720
+#define MACH_TYPE_OPTORM920            721
+#define MACH_TYPE_ADSBITSYXB           722
+#define MACH_TYPE_ADSSPHERE            723
+#define MACH_TYPE_ADSPORTAL            724
+#define MACH_TYPE_LN2410SBC            725
+#define MACH_TYPE_CB3RUFC              726
+#define MACH_TYPE_MP2USB               727
+#define MACH_TYPE_NTNP425C             728
+#define MACH_TYPE_COLIBRI              729
+#define MACH_TYPE_PCM7220              730
+#define MACH_TYPE_GATEWAY7001          731
+#define MACH_TYPE_PCM027               732
+#define MACH_TYPE_CMPXA                733
+#define MACH_TYPE_ANUBIS               734
+#define MACH_TYPE_ITE8152              735
+#define MACH_TYPE_LPC3XXX              736
+#define MACH_TYPE_PUPPETEER            737
+#define MACH_TYPE_E570                 739
+#define MACH_TYPE_X50                  740
+#define MACH_TYPE_RECON                741
+#define MACH_TYPE_XBOARDGP8            742
+#define MACH_TYPE_FPIC2                743
+#define MACH_TYPE_AKITA                744
+#define MACH_TYPE_A81                  745
+#define MACH_TYPE_SVM_SC25X            746
+#define MACH_TYPE_VADATECH020          747
+#define MACH_TYPE_TLI                  748
+#define MACH_TYPE_EDB9315LC            749
+#define MACH_TYPE_PASSEC               750
+#define MACH_TYPE_DS_TIGER             751
+#define MACH_TYPE_E310                 752
+#define MACH_TYPE_E330                 753
+#define MACH_TYPE_RT3000               754
+#define MACH_TYPE_NOKIA770             755
+#define MACH_TYPE_PNX0106              756
+#define MACH_TYPE_HX21XX               757
+#define MACH_TYPE_FARADAY              758
+#define MACH_TYPE_SBC9312              759
+#define MACH_TYPE_BATMAN               760
+#define MACH_TYPE_JPD201               761
+#define MACH_TYPE_MIPSA                762
+#define MACH_TYPE_KACOM                763
+#define MACH_TYPE_SWARCOCPU            764
+#define MACH_TYPE_SWARCODSL            765
+#define MACH_TYPE_BLUEANGEL            766
+#define MACH_TYPE_HAIRYGRAMA           767
+#define MACH_TYPE_BANFF                768
+#define MACH_TYPE_CARMEVA              769
+#define MACH_TYPE_SAM255               770
+#define MACH_TYPE_PPM10                771
+#define MACH_TYPE_EDB9315A             772
+#define MACH_TYPE_SUNSET               773
+#define MACH_TYPE_STARGATE2            774
+#define MACH_TYPE_INTELMOTE2           775
+#define MACH_TYPE_TRIZEPS4             776
+#define MACH_TYPE_MAINSTONE2           777
+#define MACH_TYPE_EZ_IXP42X            778
+#define MACH_TYPE_TAPWAVE_ZODIAC       779
+#define MACH_TYPE_UNIVERSALMETER       780
+#define MACH_TYPE_HICOARM9             781
+#define MACH_TYPE_PNX4008              782
+#define MACH_TYPE_KWS6000              783
+#define MACH_TYPE_PORTUX920T           784
+#define MACH_TYPE_EZ_X5                785
+#define MACH_TYPE_OMAP_RUDOLPH         786
+#define MACH_TYPE_CPUAT91              787
+#define MACH_TYPE_REA9200              788
+#define MACH_TYPE_ACTS_PUNE_SA1110     789
+#define MACH_TYPE_IXP425               790
+#define MACH_TYPE_I30030ADS            791
+#define MACH_TYPE_PERCH                792
+#define MACH_TYPE_EIS05R1              793
+#define MACH_TYPE_PEPPERPAD            794
+#define MACH_TYPE_SB3010               795
+#define MACH_TYPE_RM9200               796
+#define MACH_TYPE_DMA03                797
+#define MACH_TYPE_ROAD_S101            798
+#define MACH_TYPE_IQ81340SC            799
+#define MACH_TYPE_IQ_NEXTGEN_B         800
+#define MACH_TYPE_IQ81340MC            801
+#define MACH_TYPE_IQ_NEXTGEN_D         802
+#define MACH_TYPE_IQ_NEXTGEN_E         803
+#define MACH_TYPE_MALLOW_AT91          804
+#define MACH_TYPE_CYBERTRACKER_I       805
+#define MACH_TYPE_GESBC931X            806
+#define MACH_TYPE_CENTIPAD             807
+#define MACH_TYPE_ARMSOC               808
+#define MACH_TYPE_SE4200               809
+#define MACH_TYPE_EMS197A              810
+#define MACH_TYPE_MICRO9               811
+#define MACH_TYPE_MICRO9L              812
+#define MACH_TYPE_UC5471DSP            813
+#define MACH_TYPE_SJ5471ENG            814
+#define MACH_TYPE_CMPXA26X             815
+#define MACH_TYPE_NC                   816
+#define MACH_TYPE_OMAP_PALMTE          817
+#define MACH_TYPE_AJAX52X              818
+#define MACH_TYPE_SIRIUSTAR            819
+#define MACH_TYPE_IODATA_HDLG          820
+#define MACH_TYPE_AT91RM9200UTL        821
+#define MACH_TYPE_BIOSAFE              822
+#define MACH_TYPE_MP1000               823
+#define MACH_TYPE_PARSY                824
+#define MACH_TYPE_CCXP                 825
+#define MACH_TYPE_OMAP_GSAMPLE         826
+#define MACH_TYPE_REALVIEW_EB          827
+#define MACH_TYPE_SAMOA                828
+#define MACH_TYPE_PALMT3               829
+#define MACH_TYPE_I878                 830
+#define MACH_TYPE_BORZOI               831
+#define MACH_TYPE_GECKO                832
+#define MACH_TYPE_DS101                833
+#define MACH_TYPE_OMAP_PALMTT2         834
+#define MACH_TYPE_PALMLD               835
+#define MACH_TYPE_CC9C                 836
+#define MACH_TYPE_SBC1670              837
+#define MACH_TYPE_IXDP28X5             838
+#define MACH_TYPE_OMAP_PALMTT          839
+#define MACH_TYPE_ML696K               840
+#define MACH_TYPE_ARCOM_ZEUS           841
+#define MACH_TYPE_OSIRIS               842
+#define MACH_TYPE_MAESTRO              843
+#define MACH_TYPE_PALMTE2              844
+#define MACH_TYPE_IXBBM                845
+#define MACH_TYPE_MX27ADS              846
+#define MACH_TYPE_AX8004               847
+#define MACH_TYPE_AT91SAM9261EK        848
+#define MACH_TYPE_LOFT                 849
+#define MACH_TYPE_MAGPIE               850
+#define MACH_TYPE_MX21ADS              851
+#define MACH_TYPE_MB87M3400            852
+#define MACH_TYPE_MGUARD_DELTA         853
+#define MACH_TYPE_DAVINCI_DVDP         854
+#define MACH_TYPE_HTCUNIVERSAL         855
+#define MACH_TYPE_TPAD                 856
+#define MACH_TYPE_ROVERP3              857
+#define MACH_TYPE_JORNADA928           858
+#define MACH_TYPE_MV88FXX81            859
+#define MACH_TYPE_STMP36XX             860
+#define MACH_TYPE_SXNI79524            861
+#define MACH_TYPE_AMS_DELTA            862
+#define MACH_TYPE_URANIUM              863
+#define MACH_TYPE_UCON                 864
+#define MACH_TYPE_NAS100D              865
+#define MACH_TYPE_L083_1000            866
+#define MACH_TYPE_EZX                  867
+#define MACH_TYPE_PNX5220              868
+#define MACH_TYPE_BUTTE                869
+#define MACH_TYPE_SRM2                 870
+#define MACH_TYPE_DSBR                 871
+#define MACH_TYPE_CRYSTALBALL          872
+#define MACH_TYPE_TINYPXA27X           873
+#define MACH_TYPE_HERBIE               874
+#define MACH_TYPE_MAGICIAN             875
+#define MACH_TYPE_CM4002               876
+#define MACH_TYPE_B4                   877
+#define MACH_TYPE_MAUI                 878
+#define MACH_TYPE_CYBERTRACKER_G       879
+#define MACH_TYPE_NXDKN                880
+#define MACH_TYPE_MIO8390              881
+#define MACH_TYPE_OMI_BOARD            882
+#define MACH_TYPE_MX21CIV              883
+#define MACH_TYPE_MAHI_CDAC            884
+#define MACH_TYPE_PALMTX               885
+#define MACH_TYPE_S3C2413              887
+#define MACH_TYPE_SAMSYS_EP0           888
+#define MACH_TYPE_WG302V1              889
+#define MACH_TYPE_WG302V2              890
+#define MACH_TYPE_EB42X                891
+#define MACH_TYPE_IQ331ES              892
+#define MACH_TYPE_COSYDSP              893
+#define MACH_TYPE_UPLAT7D              894
+#define MACH_TYPE_PTDAVINCI            895
+#define MACH_TYPE_MBUS                 896
+#define MACH_TYPE_NADIA2VB             897
+#define MACH_TYPE_R1000                898
+#define MACH_TYPE_HW90250              899
+#define MACH_TYPE_OMAP_2430SDP         900
+#define MACH_TYPE_DAVINCI_EVM          901
+#define MACH_TYPE_OMAP_TORNADO         902
+#define MACH_TYPE_OLOCREEK             903
+#define MACH_TYPE_PALMZ72              904
+#define MACH_TYPE_NXDB500              905
+#define MACH_TYPE_APF9328              906
+#define MACH_TYPE_OMAP_WIPOQ           907
+#define MACH_TYPE_OMAP_TWIP            908
+#define MACH_TYPE_TREO650              909
+#define MACH_TYPE_ACUMEN               910
+#define MACH_TYPE_XP100                911
+#define MACH_TYPE_FS2410               912
+#define MACH_TYPE_PXA270_CERF          913
+#define MACH_TYPE_SQ2FTLPALM           914
+#define MACH_TYPE_BSEMSERVER           915
+#define MACH_TYPE_NETCLIENT            916
+#define MACH_TYPE_PALMT5               917
+#define MACH_TYPE_PALMTC               918
+#define MACH_TYPE_OMAP_APOLLON         919
+#define MACH_TYPE_MXC30030EVB          920
+#define MACH_TYPE_REA_2D               921
+#define MACH_TYPE_TI3E524              922
+#define MACH_TYPE_ATEB9200             923
+#define MACH_TYPE_AUCKLAND             924
+#define MACH_TYPE_AK3320M              925
+#define MACH_TYPE_DURAMAX              926
+#define MACH_TYPE_N35                  927
+#define MACH_TYPE_PRONGHORN            928
+#define MACH_TYPE_FUNDY                929
+#define MACH_TYPE_LOGICPD_PXA270       930
+#define MACH_TYPE_CPU777               931
+#define MACH_TYPE_SIMICON9201          932
+#define MACH_TYPE_LEAP2_HPM            933
+#define MACH_TYPE_CM922TXA10           934
+#define MACH_TYPE_PXA                  935
+#define MACH_TYPE_SANDGATE2            936
+#define MACH_TYPE_SANDGATE2G           937
+#define MACH_TYPE_SANDGATE2P           938
+#define MACH_TYPE_FRED_JACK            939
+#define MACH_TYPE_TTG_COLOR1           940
+#define MACH_TYPE_NXEB500HMI           941
+#define MACH_TYPE_NETDCU8              942
+#define MACH_TYPE_NG_FVX538            944
+#define MACH_TYPE_NG_FVS338            945
+#define MACH_TYPE_PNX4103              946
+#define MACH_TYPE_HESDB                947
+#define MACH_TYPE_XSILO                948
+#define MACH_TYPE_ESPRESSO             949
+#define MACH_TYPE_EMLC                 950
+#define MACH_TYPE_SISTERON             951
+#define MACH_TYPE_RX1950               952
+#define MACH_TYPE_TSC_VENUS            953
+#define MACH_TYPE_DS101J               954
+#define MACH_TYPE_MXC30030ADS          955
+#define MACH_TYPE_FUJITSU_WIMAXSOC     956
+#define MACH_TYPE_DUALPCMODEM          957
+#define MACH_TYPE_GESBC9312            958
+#define MACH_TYPE_HTCAPACHE            959
+#define MACH_TYPE_IXDP435              960
+#define MACH_TYPE_CATPROVT100          961
+#define MACH_TYPE_PICOTUX1XX           962
+#define MACH_TYPE_PICOTUX2XX           963
+#define MACH_TYPE_DSMG600              964
+#define MACH_TYPE_EMPC2                965
+#define MACH_TYPE_VENTURA              966
+#define MACH_TYPE_PHIDGET_SBC          967
+#define MACH_TYPE_IJ3K                 968
+#define MACH_TYPE_PISGAH               969
+#define MACH_TYPE_OMAP_FSAMPLE         970
+#define MACH_TYPE_SG720                971
+#define MACH_TYPE_REDFOX               972
+#define MACH_TYPE_MYSH_EP9315_1        973
+#define MACH_TYPE_TPF106               974
+#define MACH_TYPE_AT91RM9200KG         975
+#define MACH_TYPE_SLEDB                976
+#define MACH_TYPE_ONTRACK              977
+#define MACH_TYPE_PM1200               978
+#define MACH_TYPE_ESS24XXX             979
+#define MACH_TYPE_COREMP7              980
+#define MACH_TYPE_NEXCODER_6446        981
+#define MACH_TYPE_STVC8380             982
+#define MACH_TYPE_TEKLYNX              983
+#define MACH_TYPE_CARBONADO            984
+#define MACH_TYPE_SYSMOS_MP730         985
+#define MACH_TYPE_SNAPPER_CL15         986
+#define MACH_TYPE_PGIGIM               987
+#define MACH_TYPE_PTX9160P2            988
+#define MACH_TYPE_DCORE1               989
+#define MACH_TYPE_VICTORPXA            990
+#define MACH_TYPE_MX2DTB               991
+#define MACH_TYPE_PXA_IREX_ER0100      992
+#define MACH_TYPE_OMAP_PALMZ71         993
+#define MACH_TYPE_BARTEC_DEG           994
+#define MACH_TYPE_HW50251              995
+#define MACH_TYPE_IBOX                 996
+#define MACH_TYPE_ATLASLH7A404         997
+#define MACH_TYPE_PT2026               998
+#define MACH_TYPE_HTCALPINE            999
+#define MACH_TYPE_BARTEC_VTU           1000
+#define MACH_TYPE_VCOREII              1001
+#define MACH_TYPE_PDNB3                1002
+#define MACH_TYPE_HTCBEETLES           1003
+#define MACH_TYPE_S3C6400              1004
+#define MACH_TYPE_S3C2443              1005
+#define MACH_TYPE_OMAP_LDK             1006
+#define MACH_TYPE_SMDK2460             1007
+#define MACH_TYPE_SMDK2440             1008
+#define MACH_TYPE_SMDK2412             1009
+#define MACH_TYPE_WEBBOX               1010
+#define MACH_TYPE_CWWNDP               1011
+#define MACH_TYPE_DRAGON               1012
+#define MACH_TYPE_OPENDO_CPU_BOARD     1013
+#define MACH_TYPE_CCM2200              1014
+#define MACH_TYPE_ETWARM               1015
+#define MACH_TYPE_M93030               1016
+#define MACH_TYPE_CC7U                 1017
+#define MACH_TYPE_MTT_RANGER           1018
+#define MACH_TYPE_NEXUS                1019
+#define MACH_TYPE_DESMAN               1020
+#define MACH_TYPE_BKDE303              1021
+#define MACH_TYPE_SMDK2413             1022
+#define MACH_TYPE_AML_M7200            1023
+#define MACH_TYPE_AML_M5900            1024
+#define MACH_TYPE_SG640                1025
+#define MACH_TYPE_EDG79524             1026
+#define MACH_TYPE_AI2410               1027
+#define MACH_TYPE_IXP465               1028
+#define MACH_TYPE_BALLOON3             1029
+#define MACH_TYPE_HEINS                1030
+#define MACH_TYPE_MPLUSEVA             1031
+#define MACH_TYPE_RT042                1032
+#define MACH_TYPE_CWIEM                1033
+#define MACH_TYPE_CM_X270              1034
+#define MACH_TYPE_CM_X255              1035
+#define MACH_TYPE_ESH_AT91             1036
+#define MACH_TYPE_SANDGATE3            1037
+#define MACH_TYPE_PRIMO                1038
+#define MACH_TYPE_GEMSTONE             1039
+#define MACH_TYPE_PRONGHORNMETRO       1040
+#define MACH_TYPE_SIDEWINDER           1041
+#define MACH_TYPE_PICOMOD1             1042
+#define MACH_TYPE_SG590                1043
+#define MACH_TYPE_AKAI9307             1044
+#define MACH_TYPE_FONTAINE             1045
+#define MACH_TYPE_WOMBAT               1046
+#define MACH_TYPE_ACQ300               1047
+#define MACH_TYPE_MOD_270              1048
+#define MACH_TYPE_VC0820               1049
+#define MACH_TYPE_ANI_AIM              1050
+#define MACH_TYPE_JELLYFISH            1051
+#define MACH_TYPE_AMANITA              1052
+#define MACH_TYPE_VLINK                1053
+#define MACH_TYPE_DEXFLEX              1054
+#define MACH_TYPE_EIGEN_TTQ            1055
+#define MACH_TYPE_ARCOM_TITAN          1056
+#define MACH_TYPE_TABLA                1057
+#define MACH_TYPE_MDIRAC3              1058
+#define MACH_TYPE_MRHFBP2              1059
+#define MACH_TYPE_AT91RM9200RB         1060
+#define MACH_TYPE_ANI_APM              1061
+#define MACH_TYPE_ELLA1                1062
+#define MACH_TYPE_INHAND_PXA27X        1063
+#define MACH_TYPE_INHAND_PXA25X        1064
+#define MACH_TYPE_EMPOS_XM             1065
+#define MACH_TYPE_EMPOS                1066
+#define MACH_TYPE_EMPOS_TINY           1067
+#define MACH_TYPE_EMPOS_SM             1068
+#define MACH_TYPE_EGRET                1069
+#define MACH_TYPE_OSTRICH              1070
+#define MACH_TYPE_N50                  1071
+#define MACH_TYPE_ECBAT91              1072
+#define MACH_TYPE_STAREAST             1073
+#define MACH_TYPE_DSPG_DW              1074
+#define MACH_TYPE_ONEARM               1075
+#define MACH_TYPE_MRG110_6             1076
+#define MACH_TYPE_WRT300NV2            1077
+#define MACH_TYPE_XM_BULVERDE          1078
+#define MACH_TYPE_MSM6100              1079
+#define MACH_TYPE_ETI_B1               1080
+#define MACH_TYPE_ZILOG_ZA9L           1081
+#define MACH_TYPE_BIT2440              1082
+#define MACH_TYPE_NBI                  1083
+#define MACH_TYPE_SMDK2443             1084
+#define MACH_TYPE_VDAVINCI             1085
+#define MACH_TYPE_ATC6                 1086
+#define MACH_TYPE_MULTMDW              1087
+#define MACH_TYPE_MBA2440              1088
+#define MACH_TYPE_ECSD                 1089
+#define MACH_TYPE_PALMZ31              1090
+#define MACH_TYPE_FSG                  1091
+#define MACH_TYPE_RAZOR101             1092
+#define MACH_TYPE_OPERA_TDM            1093
+#define MACH_TYPE_COMCERTO             1094
+#define MACH_TYPE_TB0319               1095
+#define MACH_TYPE_KWS8000              1096
+#define MACH_TYPE_B2                   1097
+#define MACH_TYPE_LCL54                1098
+#define MACH_TYPE_AT91SAM9260EK        1099
+#define MACH_TYPE_GLANTANK             1100
+#define MACH_TYPE_N2100                1101
+#define MACH_TYPE_N4100                1102
+#define MACH_TYPE_VERTICAL_RSC4        1103
+#define MACH_TYPE_SG8100               1104
+#define MACH_TYPE_IM42XX               1105
+#define MACH_TYPE_FTXX                 1106
+#define MACH_TYPE_LWFUSION             1107
+#define MACH_TYPE_QT2410               1108
+#define MACH_TYPE_KIXRP435             1109
+#define MACH_TYPE_CCW9C                1110
+#define MACH_TYPE_DABHS                1111
+#define MACH_TYPE_GZMX                 1112
+#define MACH_TYPE_IPNW100AP            1113
+#define MACH_TYPE_CC9P9360DEV          1114
+#define MACH_TYPE_CC9P9750DEV          1115
+#define MACH_TYPE_CC9P9360VAL          1116
+#define MACH_TYPE_CC9P9750VAL          1117
+#define MACH_TYPE_NX70V                1118
+#define MACH_TYPE_AT91RM9200DF         1119
+#define MACH_TYPE_SE_PILOT2            1120
+#define MACH_TYPE_MTCN_T800            1121
+#define MACH_TYPE_VCMX212              1122
+#define MACH_TYPE_LYNX                 1123
+#define MACH_TYPE_AT91SAM9260ID        1124
+#define MACH_TYPE_HW86052              1125
+#define MACH_TYPE_PILZ_PMI3            1126
+#define MACH_TYPE_EDB9302A             1127
+#define MACH_TYPE_EDB9307A             1128
+#define MACH_TYPE_CT_DFS               1129
+#define MACH_TYPE_PILZ_PMI4            1130
+#define MACH_TYPE_XCEEDNP_IXP          1131
+#define MACH_TYPE_SMDK2442B            1132
+#define MACH_TYPE_XNODE                1133
+#define MACH_TYPE_AIDX270              1134
+#define MACH_TYPE_REMA                 1135
+#define MACH_TYPE_BPS1000              1136
+#define MACH_TYPE_HW90350              1137
+#define MACH_TYPE_OMAP_3430SDP         1138
+#define MACH_TYPE_BLUETOUCH            1139
+#define MACH_TYPE_VSTMS                1140
+#define MACH_TYPE_XSBASE270            1141
+#define MACH_TYPE_AT91SAM9260EK_CN     1142
+#define MACH_TYPE_ADSTURBOXB           1143
+#define MACH_TYPE_OTI4110              1144
+#define MACH_TYPE_HME_PXA              1145
+#define MACH_TYPE_DEISTERDCA           1146
+#define MACH_TYPE_CES_SSEM2            1147
+#define MACH_TYPE_CES_MTR              1148
+#define MACH_TYPE_TDS_AVNG_SBC         1149
+#define MACH_TYPE_EVEREST              1150
+#define MACH_TYPE_PNX4010              1151
+#define MACH_TYPE_OXNAS                1152
+#define MACH_TYPE_FIORI                1153
+#define MACH_TYPE_ML1200               1154
+#define MACH_TYPE_PECOS                1155
+#define MACH_TYPE_NB2XXX               1156
+#define MACH_TYPE_HW6900               1157
+#define MACH_TYPE_CDCS_QUOLL           1158
+#define MACH_TYPE_QUICKSILVER          1159
+#define MACH_TYPE_UPLAT926             1160
+#define MACH_TYPE_DEP2410_THOMAS       1161
+#define MACH_TYPE_DTK2410              1162
+#define MACH_TYPE_CHILI                1163
+#define MACH_TYPE_DEMETER              1164
+#define MACH_TYPE_DIONYSUS             1165
+#define MACH_TYPE_AS352X               1166
+#define MACH_TYPE_SERVICE              1167
+#define MACH_TYPE_CS_E9301             1168
+#define MACH_TYPE_MICRO9M              1169
+#define MACH_TYPE_IA_MOSPCK            1170
+#define MACH_TYPE_QL201B               1171
+#define MACH_TYPE_BBM                  1174
+#define MACH_TYPE_EXXX                 1175
+#define MACH_TYPE_WMA11B               1176
+#define MACH_TYPE_PELCO_ATLAS          1177
+#define MACH_TYPE_G500                 1178
+#define MACH_TYPE_BUG                  1179
+#define MACH_TYPE_MX33ADS              1180
+#define MACH_TYPE_CHUB                 1181
+#define MACH_TYPE_NEO1973_GTA01        1182
+#define MACH_TYPE_W90N740              1183
+#define MACH_TYPE_MEDALLION_SA2410     1184
+#define MACH_TYPE_IA_CPU_9200_2        1185
+#define MACH_TYPE_DIMMRM9200           1186
+#define MACH_TYPE_PM9261               1187
+#define MACH_TYPE_ML7304               1189
+#define MACH_TYPE_UCP250               1190
+#define MACH_TYPE_INTBOARD             1191
+#define MACH_TYPE_GULFSTREAM           1192
+#define MACH_TYPE_LABQUEST             1193
+#define MACH_TYPE_VCMX313              1194
+#define MACH_TYPE_URG200               1195
+#define MACH_TYPE_CPUX255LCDNET        1196
+#define MACH_TYPE_NETDCU9              1197
+#define MACH_TYPE_NETDCU10             1198
+#define MACH_TYPE_DSPG_DGA             1199
+#define MACH_TYPE_DSPG_DVW             1200
+#define MACH_TYPE_SOLOS                1201
+#define MACH_TYPE_AT91SAM9263EK        1202
+#define MACH_TYPE_OSSTBOX              1203
+#define MACH_TYPE_KBAT9261             1204
+#define MACH_TYPE_CT1100               1205
+#define MACH_TYPE_AKCPPXA              1206
+#define MACH_TYPE_OCHAYA1020           1207
+#define MACH_TYPE_HITRACK              1208
+#define MACH_TYPE_SYME1                1209
+#define MACH_TYPE_SYHL1                1210
+#define MACH_TYPE_EMPCA400             1211
+#define MACH_TYPE_EM7210               1212
+#define MACH_TYPE_HTCHERMES            1213
+#define MACH_TYPE_ETI_C1               1214
+#define MACH_TYPE_AC100                1216
+#define MACH_TYPE_SNEETCH              1217
+#define MACH_TYPE_STUDENTMATE          1218
+#define MACH_TYPE_ZIR2410              1219
+#define MACH_TYPE_ZIR2413              1220
+#define MACH_TYPE_DLONIP3              1221
+#define MACH_TYPE_INSTREAM             1222
+#define MACH_TYPE_AMBARELLA            1223
+#define MACH_TYPE_NEVIS                1224
+#define MACH_TYPE_HTC_TRINITY          1225
+#define MACH_TYPE_QL202B               1226
+#define MACH_TYPE_VPAC270              1227
+#define MACH_TYPE_RD129                1228
+#define MACH_TYPE_HTCWIZARD            1229
+#define MACH_TYPE_TREO680              1230
+#define MACH_TYPE_TECON_TMEZON         1231
+#define MACH_TYPE_ZYLONITE             1233
+#define MACH_TYPE_GENE1270             1234
+#define MACH_TYPE_ZIR2412              1235
+#define MACH_TYPE_MX31LITE             1236
+#define MACH_TYPE_T700WX               1237
+#define MACH_TYPE_VF100                1238
+#define MACH_TYPE_NSB2                 1239
+#define MACH_TYPE_NXHMI_BB             1240
+#define MACH_TYPE_NXHMI_RE             1241
+#define MACH_TYPE_N4100PRO             1242
+#define MACH_TYPE_SAM9260              1243
+#define MACH_TYPE_OMAP_TREO600         1244
+#define MACH_TYPE_INDY2410             1245
+#define MACH_TYPE_NELT_A               1246
+#define MACH_TYPE_N311                 1248
+#define MACH_TYPE_AT91SAM9260VGK       1249
+#define MACH_TYPE_AT91LEPPE            1250
+#define MACH_TYPE_AT91LEPCCN           1251
+#define MACH_TYPE_APC7100              1252
+#define MACH_TYPE_STARGAZER            1253
+#define MACH_TYPE_SONATA               1254
+#define MACH_TYPE_SCHMOOGIE            1255
+#define MACH_TYPE_AZTOOL               1256
+#define MACH_TYPE_MIOA701              1257
+#define MACH_TYPE_SXNI9260             1258
+#define MACH_TYPE_MXC27520EVB          1259
+#define MACH_TYPE_ARMADILLO5X0         1260
+#define MACH_TYPE_MB9260               1261
+#define MACH_TYPE_MB9263               1262
+#define MACH_TYPE_IPAC9302             1263
+#define MACH_TYPE_CC9P9360JS           1264
+#define MACH_TYPE_GALLIUM              1265
+#define MACH_TYPE_MSC2410              1266
+#define MACH_TYPE_GHI270               1267
+#define MACH_TYPE_DAVINCI_LEONARDO     1268
+#define MACH_TYPE_OIAB                 1269
+#define MACH_TYPE_SMDK6400             1270
+#define MACH_TYPE_NOKIA_N800           1271
+#define MACH_TYPE_GREENPHONE           1272
+#define MACH_TYPE_COMPEXWP18           1273
+#define MACH_TYPE_XMATE                1274
+#define MACH_TYPE_ENERGIZER            1275
+#define MACH_TYPE_IME1                 1276
+#define MACH_TYPE_SWEDATMS             1277
+#define MACH_TYPE_NTNP435C             1278
+#define MACH_TYPE_SPECTRO2             1279
+#define MACH_TYPE_H6039                1280
+#define MACH_TYPE_EP80219              1281
+#define MACH_TYPE_SAMOA_II             1282
+#define MACH_TYPE_CWMXL                1283
+#define MACH_TYPE_AS9200               1284
+#define MACH_TYPE_SFX1149              1285
+#define MACH_TYPE_NAVI010              1286
+#define MACH_TYPE_MULTMDP              1287
+#define MACH_TYPE_SCB9520              1288
+#define MACH_TYPE_HTCATHENA            1289
+#define MACH_TYPE_XP179                1290
+#define MACH_TYPE_H4300                1291
+#define MACH_TYPE_GORAMO_MLR           1292
+#define MACH_TYPE_MXC30020EVB          1293
+#define MACH_TYPE_ADSBITSYG5           1294
+#define MACH_TYPE_ADSPORTALPLUS        1295
+#define MACH_TYPE_MMSP2PLUS            1296
+#define MACH_TYPE_EM_X270              1297
+#define MACH_TYPE_TPP302               1298
+#define MACH_TYPE_TPM104               1299
+#define MACH_TYPE_TPM102               1300
+#define MACH_TYPE_TPM109               1301
+#define MACH_TYPE_FBXO1                1302
+#define MACH_TYPE_HXD8                 1303
+#define MACH_TYPE_NEO1973_GTA02        1304
+#define MACH_TYPE_EMTEST               1305
+#define MACH_TYPE_AD6900               1306
+#define MACH_TYPE_EUROPA               1307
+#define MACH_TYPE_METROCONNECT         1308
+#define MACH_TYPE_EZ_S2410             1309
+#define MACH_TYPE_EZ_S2440             1310
+#define MACH_TYPE_EZ_EP9312            1311
+#define MACH_TYPE_EZ_EP9315            1312
+#define MACH_TYPE_EZ_X7                1313
+#define MACH_TYPE_GODOTDB              1314
+#define MACH_TYPE_MISTRAL              1315
+#define MACH_TYPE_MSM                  1316
+#define MACH_TYPE_CT5910               1317
+#define MACH_TYPE_CT5912               1318
+#define MACH_TYPE_HYNET_INE            1319
+#define MACH_TYPE_HYNET_APP            1320
+#define MACH_TYPE_MSM7200              1321
+#define MACH_TYPE_MSM7600              1322
+#define MACH_TYPE_CEB255               1323
+#define MACH_TYPE_CIEL                 1324
+#define MACH_TYPE_SLM5650              1325
+#define MACH_TYPE_AT91SAM9RLEK         1326
+#define MACH_TYPE_COMTECH_ROUTER       1327
+#define MACH_TYPE_SBC2410X             1328
+#define MACH_TYPE_AT4X0BD              1329
+#define MACH_TYPE_CBIFR                1330
+#define MACH_TYPE_ARCOM_QUANTUM        1331
+#define MACH_TYPE_MATRIX520            1332
+#define MACH_TYPE_MATRIX510            1333
+#define MACH_TYPE_MATRIX500            1334
+#define MACH_TYPE_M501                 1335
+#define MACH_TYPE_AAEON1270            1336
+#define MACH_TYPE_MATRIX500EV          1337
+#define MACH_TYPE_PAC500               1338
+#define MACH_TYPE_PNX8181              1339
+#define MACH_TYPE_COLIBRI320           1340
+#define MACH_TYPE_AZTOOLBB             1341
+#define MACH_TYPE_AZTOOLG2             1342
+#define MACH_TYPE_DVLHOST              1343
+#define MACH_TYPE_ZIR9200              1344
+#define MACH_TYPE_ZIR9260              1345
+#define MACH_TYPE_COCOPAH              1346
+#define MACH_TYPE_NDS                  1347
+#define MACH_TYPE_ROSENCRANTZ          1348
+#define MACH_TYPE_FTTX_ODSC            1349
+#define MACH_TYPE_CLASSE_R6904         1350
+#define MACH_TYPE_CAM60                1351
+#define MACH_TYPE_MXC30031ADS          1352
+#define MACH_TYPE_DATACALL             1353
+#define MACH_TYPE_AT91EB01             1354
+#define MACH_TYPE_RTY                  1355
+#define MACH_TYPE_DWL2100              1356
+#define MACH_TYPE_VINSI                1357
+#define MACH_TYPE_DB88F5281            1358
+#define MACH_TYPE_CSB726               1359
+#define MACH_TYPE_TIK27                1360
+#define MACH_TYPE_MX_UC7420            1361
+#define MACH_TYPE_RIRM3                1362
+#define MACH_TYPE_PELCO_ODYSSEY        1363
+#define MACH_TYPE_ADX_ABOX             1365
+#define MACH_TYPE_ADX_TPID             1366
+#define MACH_TYPE_MINICHECK            1367
+#define MACH_TYPE_IDAM                 1368
+#define MACH_TYPE_MARIO_MX             1369
+#define MACH_TYPE_VI1888               1370
+#define MACH_TYPE_ZR4230               1371
+#define MACH_TYPE_T1_IX_BLUE           1372
+#define MACH_TYPE_SYHQ2                1373
+#define MACH_TYPE_COMPUTIME_R3         1374
+#define MACH_TYPE_ORATIS               1375
+#define MACH_TYPE_MIKKO                1376
+#define MACH_TYPE_HOLON                1377
+#define MACH_TYPE_OLIP8                1378
+#define MACH_TYPE_GHI270HG             1379
+#define MACH_TYPE_DAVINCI_DM6467_EVM   1380
+#define MACH_TYPE_DAVINCI_DM355_EVM    1381
+#define MACH_TYPE_BLACKRIVER           1383
+#define MACH_TYPE_SANDGATEWP           1384
+#define MACH_TYPE_CDOTBWSG             1385
+#define MACH_TYPE_QUARK963             1386
+#define MACH_TYPE_CSB735               1387
+#define MACH_TYPE_LITTLETON            1388
+#define MACH_TYPE_MIO_P550             1389
+#define MACH_TYPE_MOTION2440           1390
+#define MACH_TYPE_IMM500               1391
+#define MACH_TYPE_HOMEMATIC            1392
+#define MACH_TYPE_ERMINE               1393
+#define MACH_TYPE_KB9202B              1394
+#define MACH_TYPE_HS1XX                1395
+#define MACH_TYPE_STUDENTMATE2440      1396
+#define MACH_TYPE_ARVOO_L1_Z1          1397
+#define MACH_TYPE_DEP2410K             1398
+#define MACH_TYPE_XXSVIDEO             1399
+#define MACH_TYPE_IM4004               1400
+#define MACH_TYPE_OCHAYA1050           1401
+#define MACH_TYPE_LEP9261              1402
+#define MACH_TYPE_SVENMEB              1403
+#define MACH_TYPE_FORTUNET2NE          1404
+#define MACH_TYPE_NXHX                 1406
+#define MACH_TYPE_REALVIEW_PB11MP      1407
+#define MACH_TYPE_IDS500               1408
+#define MACH_TYPE_ORS_N725             1409
+#define MACH_TYPE_HSDARM               1410
+#define MACH_TYPE_SHA_PON003           1411
+#define MACH_TYPE_SHA_PON004           1412
+#define MACH_TYPE_SHA_PON007           1413
+#define MACH_TYPE_SHA_PON011           1414
+#define MACH_TYPE_H6042                1415
+#define MACH_TYPE_H6043                1416
+#define MACH_TYPE_LOOXC550             1417
+#define MACH_TYPE_CNTY_TITAN           1418
+#define MACH_TYPE_APP3XX               1419
+#define MACH_TYPE_SIDEOATSGRAMA        1420
+#define MACH_TYPE_TREO700P             1421
+#define MACH_TYPE_TREO700W             1422
+#define MACH_TYPE_TREO750              1423
+#define MACH_TYPE_TREO755P             1424
+#define MACH_TYPE_EZREGANUT9200        1425
+#define MACH_TYPE_SARGE                1426
+#define MACH_TYPE_A696                 1427
+#define MACH_TYPE_TURTLE               1428
+#define MACH_TYPE_MX27_3DS             1430
+#define MACH_TYPE_BISHOP               1431
+#define MACH_TYPE_PXX                  1432
+#define MACH_TYPE_REDWOOD              1433
+#define MACH_TYPE_OMAP_2430DLP         1436
+#define MACH_TYPE_OMAP_2430OSK         1437
+#define MACH_TYPE_SARDINE              1438
+#define MACH_TYPE_HALIBUT              1439
+#define MACH_TYPE_TROUT                1440
+#define MACH_TYPE_GOLDFISH             1441
+#define MACH_TYPE_GESBC2440            1442
+#define MACH_TYPE_NOMAD                1443
+#define MACH_TYPE_ROSALIND             1444
+#define MACH_TYPE_CC9P9215             1445
+#define MACH_TYPE_CC9P9210             1446
+#define MACH_TYPE_CC9P9215JS           1447
+#define MACH_TYPE_CC9P9210JS           1448
+#define MACH_TYPE_NASFFE               1449
+#define MACH_TYPE_TN2X0BD              1450
+#define MACH_TYPE_GWMPXA               1451
+#define MACH_TYPE_EXYPLUS              1452
+#define MACH_TYPE_JADOO21              1453
+#define MACH_TYPE_LOOXN560             1454
+#define MACH_TYPE_BONSAI               1455
+#define MACH_TYPE_ADSMILGATO           1456
+#define MACH_TYPE_GBA                  1457
+#define MACH_TYPE_H6044                1458
+#define MACH_TYPE_APP                  1459
+#define MACH_TYPE_TCT_HAMMER           1460
+#define MACH_TYPE_HERALD               1461
+#define MACH_TYPE_ARTEMIS              1462
+#define MACH_TYPE_HTCTITAN             1463
+#define MACH_TYPE_QRANIUM              1464
+#define MACH_TYPE_ADX_WSC2             1465
+#define MACH_TYPE_ADX_MEDCOM           1466
+#define MACH_TYPE_BBOARD               1467
+#define MACH_TYPE_CAMBRIA              1468
+#define MACH_TYPE_MT7XXX               1469
+#define MACH_TYPE_MATRIX512            1470
+#define MACH_TYPE_MATRIX522            1471
+#define MACH_TYPE_IPAC5010             1472
+#define MACH_TYPE_SAKURA               1473
+#define MACH_TYPE_GROCX                1474
+#define MACH_TYPE_PM9263               1475
+#define MACH_TYPE_SIM_ONE              1476
+#define MACH_TYPE_ACQ132               1477
+#define MACH_TYPE_DATR                 1478
+#define MACH_TYPE_ACTUX1               1479
+#define MACH_TYPE_ACTUX2               1480
+#define MACH_TYPE_ACTUX3               1481
+#define MACH_TYPE_FLEXIT               1482
+#define MACH_TYPE_BH2X0BD              1483
+#define MACH_TYPE_ATB2002              1484
+#define MACH_TYPE_XENON                1485
+#define MACH_TYPE_FM607                1486
+#define MACH_TYPE_MATRIX514            1487
+#define MACH_TYPE_MATRIX524            1488
+#define MACH_TYPE_INPOD                1489
+#define MACH_TYPE_JIVE                 1490
+#define MACH_TYPE_TLL_MX21             1491
+#define MACH_TYPE_SBC2800              1492
+#define MACH_TYPE_CC7UCAMRY            1493
+#define MACH_TYPE_UBISYS_P9_SC15       1494
+#define MACH_TYPE_UBISYS_P9_SSC2D10    1495
+#define MACH_TYPE_UBISYS_P9_RCU3       1496
+#define MACH_TYPE_AML_M8000            1497
+#define MACH_TYPE_SNAPPER_270          1498
+#define MACH_TYPE_OMAP_BBX             1499
+#define MACH_TYPE_UCN2410              1500
+#define MACH_TYPE_SAM9_L9260           1501
+#define MACH_TYPE_ETI_C2               1502
+#define MACH_TYPE_AVALANCHE            1503
+#define MACH_TYPE_REALVIEW_PB1176      1504
+#define MACH_TYPE_DP1500               1505
+#define MACH_TYPE_APPLE_IPHONE         1506
+#define MACH_TYPE_YL9200               1507
+#define MACH_TYPE_RD88F5182            1508
+#define MACH_TYPE_KUROBOX_PRO          1509
+#define MACH_TYPE_SE_POET              1510
+#define MACH_TYPE_MX31_3DS             1511
+#define MACH_TYPE_R270                 1512
+#define MACH_TYPE_ARMOUR21             1513
+#define MACH_TYPE_DT2                  1514
+#define MACH_TYPE_VT4                  1515
+#define MACH_TYPE_TYCO320              1516
+#define MACH_TYPE_ADMA                 1517
+#define MACH_TYPE_WP188                1518
+#define MACH_TYPE_CORSICA              1519
+#define MACH_TYPE_BIGEYE               1520
+#define MACH_TYPE_TLL5000              1522
+#define MACH_TYPE_BEBOT                1523
+#define MACH_TYPE_QONG                 1524
+#define MACH_TYPE_TCOMPACT             1525
+#define MACH_TYPE_PUMA5                1526
+#define MACH_TYPE_ELARA                1527
+#define MACH_TYPE_ELLINGTON            1528
+#define MACH_TYPE_XDA_ATOM             1529
+#define MACH_TYPE_ENERGIZER2           1530
+#define MACH_TYPE_ODIN                 1531
+#define MACH_TYPE_ACTUX4               1532
+#define MACH_TYPE_ESL_OMAP             1533
+#define MACH_TYPE_OMAP2EVM             1534
+#define MACH_TYPE_OMAP3EVM             1535
+#define MACH_TYPE_ADX_PCU57            1536
+#define MACH_TYPE_MONACO               1537
+#define MACH_TYPE_LEVANTE              1538
+#define MACH_TYPE_TMXIPX425            1539
+#define MACH_TYPE_LEEP                 1540
+#define MACH_TYPE_RAAD                 1541
+#define MACH_TYPE_DNS323               1542
+#define MACH_TYPE_AP1000               1543
+#define MACH_TYPE_A9SAM6432            1544
+#define MACH_TYPE_SHINY                1545
+#define MACH_TYPE_OMAP3_BEAGLE         1546
+#define MACH_TYPE_CSR_BDB2             1547
+#define MACH_TYPE_NOKIA_N810           1548
+#define MACH_TYPE_C270                 1549
+#define MACH_TYPE_SENTRY               1550
+#define MACH_TYPE_PCM038               1551
+#define MACH_TYPE_ANC300               1552
+#define MACH_TYPE_HTCKAISER            1553
+#define MACH_TYPE_SBAT100              1554
+#define MACH_TYPE_MODUNORM             1555
+#define MACH_TYPE_PELOS_TWARM          1556
+#define MACH_TYPE_FLANK                1557
+#define MACH_TYPE_SIRLOIN              1558
+#define MACH_TYPE_BRISKET              1559
+#define MACH_TYPE_CHUCK                1560
+#define MACH_TYPE_OTTER                1561
+#define MACH_TYPE_DAVINCI_LDK          1562
+#define MACH_TYPE_PHREEDOM             1563
+#define MACH_TYPE_SG310                1564
+#define MACH_TYPE_TS209                1565
+#define MACH_TYPE_AT91CAP9ADK          1566
+#define MACH_TYPE_TION9315             1567
+#define MACH_TYPE_MAST                 1568
+#define MACH_TYPE_PFW                  1569
+#define MACH_TYPE_YL_P2440             1570
+#define MACH_TYPE_ZSBC32               1571
+#define MACH_TYPE_OMAP_PACE2           1572
+#define MACH_TYPE_IMX_PACE2            1573
+#define MACH_TYPE_MX31MOBOARD          1574
+#define MACH_TYPE_MX37_3DS             1575
+#define MACH_TYPE_RCC                  1576
+#define MACH_TYPE_ARM9                 1577
+#define MACH_TYPE_VISION_EP9307        1578
+#define MACH_TYPE_SCLY1000             1579
+#define MACH_TYPE_FONTEL_EP            1580
+#define MACH_TYPE_VOICEBLUE3G          1581
+#define MACH_TYPE_TT9200               1582
+#define MACH_TYPE_DIGI2410             1583
+#define MACH_TYPE_TERASTATION_PRO2     1584
+#define MACH_TYPE_LINKSTATION_PRO      1585
+#define MACH_TYPE_MOTOROLA_A780        1587
+#define MACH_TYPE_MOTOROLA_E6          1588
+#define MACH_TYPE_MOTOROLA_E2          1589
+#define MACH_TYPE_MOTOROLA_E680        1590
+#define MACH_TYPE_UR2410               1591
+#define MACH_TYPE_TAS9261              1592
+#define MACH_TYPE_HERMES_HD            1593
+#define MACH_TYPE_PERSEO_HD            1594
+#define MACH_TYPE_STARGAZER2           1595
+#define MACH_TYPE_E350                 1596
+#define MACH_TYPE_WPCM450              1597
+#define MACH_TYPE_CARTESIO             1598
+#define MACH_TYPE_TOYBOX               1599
+#define MACH_TYPE_TX27                 1600
+#define MACH_TYPE_TS409                1601
+#define MACH_TYPE_P300                 1602
+#define MACH_TYPE_XDACOMET             1603
+#define MACH_TYPE_DEXFLEX2             1604
+#define MACH_TYPE_OW                   1605
+#define MACH_TYPE_ARMEBS3              1606
+#define MACH_TYPE_U3                   1607
+#define MACH_TYPE_SMDK2450             1608
+#define MACH_TYPE_RSI_EWS              1609
+#define MACH_TYPE_TNB                  1610
+#define MACH_TYPE_TOEPATH              1611
+#define MACH_TYPE_KB9263               1612
+#define MACH_TYPE_MT7108               1613
+#define MACH_TYPE_SMTR2440             1614
+#define MACH_TYPE_MANAO                1615
+#define MACH_TYPE_CM_X300              1616
+#define MACH_TYPE_GULFSTREAM_KP        1617
+#define MACH_TYPE_LANREADYFN522        1618
+#define MACH_TYPE_ARMA37               1619
+#define MACH_TYPE_MENDEL               1620
+#define MACH_TYPE_PELCO_ILIAD          1621
+#define MACH_TYPE_UNIT2P               1622
+#define MACH_TYPE_INC20OTTER           1623
+#define MACH_TYPE_AT91SAM9G20EK        1624
+#define MACH_TYPE_STORCENTER           1625
+#define MACH_TYPE_SMDK6410             1626
+#define MACH_TYPE_U300                 1627
+#define MACH_TYPE_U500                 1628
+#define MACH_TYPE_DS9260               1629
+#define MACH_TYPE_RIVERROCK            1630
+#define MACH_TYPE_SCIBATH              1631
+#define MACH_TYPE_AT91SAM7SE512EK      1632
+#define MACH_TYPE_WRT350N_V2           1633
+#define MACH_TYPE_MULTIMEDIA           1634
+#define MACH_TYPE_MARVIN               1635
+#define MACH_TYPE_X500                 1636
+#define MACH_TYPE_AWLUG4LCU            1637
+#define MACH_TYPE_PALERMOC             1638
+#define MACH_TYPE_OMAP_LDP             1639
+#define MACH_TYPE_IP500                1640
+#define MACH_TYPE_ASE2                 1642
+#define MACH_TYPE_MX35EVB              1643
+#define MACH_TYPE_AML_M8050            1644
+#define MACH_TYPE_MX35_3DS             1645
+#define MACH_TYPE_MARS                 1646
+#define MACH_TYPE_NEUROS_OSD2          1647
+#define MACH_TYPE_BADGER               1648
+#define MACH_TYPE_TRIZEPS4WL           1649
+#define MACH_TYPE_TRIZEPS5             1650
+#define MACH_TYPE_MARLIN               1651
+#define MACH_TYPE_TS78XX               1652
+#define MACH_TYPE_HPIPAQ214            1653
+#define MACH_TYPE_AT572D940DCM         1654
+#define MACH_TYPE_NE1BOARD             1655
+#define MACH_TYPE_ZANTE                1656
+#define MACH_TYPE_SFFSDR               1657
+#define MACH_TYPE_TW2662               1658
+#define MACH_TYPE_VF10XX               1659
+#define MACH_TYPE_ZORAN43XX            1660
+#define MACH_TYPE_SONIX926             1661
+#define MACH_TYPE_CELESTIALSEMI        1662
+#define MACH_TYPE_CC9M2443JS           1663
+#define MACH_TYPE_TW5334               1664
+#define MACH_TYPE_HTCARTEMIS           1665
+#define MACH_TYPE_NAL_HLITE            1666
+#define MACH_TYPE_HTCVOGUE             1667
+#define MACH_TYPE_SMARTWEB             1668
+#define MACH_TYPE_MV86XX               1669
+#define MACH_TYPE_MV87XX               1670
+#define MACH_TYPE_SONGYOUNGHO          1671
+#define MACH_TYPE_YOUNGHOTEMA          1672
+#define MACH_TYPE_PCM037               1673
+#define MACH_TYPE_MMVP                 1674
+#define MACH_TYPE_MMAP                 1675
+#define MACH_TYPE_PTID2410             1676
+#define MACH_TYPE_JAMES_926            1677
+#define MACH_TYPE_FM6000               1678
+#define MACH_TYPE_DB88F6281_BP         1680
+#define MACH_TYPE_RD88F6192_NAS        1681
+#define MACH_TYPE_RD88F6281            1682
+#define MACH_TYPE_DB78X00_BP           1683
+#define MACH_TYPE_SMDK2416             1685
+#define MACH_TYPE_OCE_SPIDER_SI        1686
+#define MACH_TYPE_OCE_SPIDER_SK        1687
+#define MACH_TYPE_ROVERN6              1688
+#define MACH_TYPE_PELCO_EVOLUTION      1689
+#define MACH_TYPE_WBD111               1690
+#define MACH_TYPE_ELARACPE             1691
+#define MACH_TYPE_MABV3                1692
+#define MACH_TYPE_MV2120               1693
+#define MACH_TYPE_CSB737               1695
+#define MACH_TYPE_MX51_3DS             1696
+#define MACH_TYPE_G900                 1697
+#define MACH_TYPE_APF27                1698
+#define MACH_TYPE_GGUS2000             1699
+#define MACH_TYPE_OMAP_2430_MIMIC      1700
+#define MACH_TYPE_IMX27LITE            1701
+#define MACH_TYPE_ALMEX                1702
+#define MACH_TYPE_CONTROL              1703
+#define MACH_TYPE_MBA2410              1704
+#define MACH_TYPE_VOLCANO              1705
+#define MACH_TYPE_ZENITH               1706
+#define MACH_TYPE_MUCHIP               1707
+#define MACH_TYPE_MAGELLAN             1708
+#define MACH_TYPE_USB_A9260            1709
+#define MACH_TYPE_USB_A9263            1710
+#define MACH_TYPE_QIL_A9260            1711
+#define MACH_TYPE_CME9210              1712
+#define MACH_TYPE_HCZH4                1713
+#define MACH_TYPE_SPEARBASIC           1714
+#define MACH_TYPE_DEP2440              1715
+#define MACH_TYPE_HDL_GXR              1716
+#define MACH_TYPE_HDL_GT               1717
+#define MACH_TYPE_HDL_4G               1718
+#define MACH_TYPE_S3C6000              1719
+#define MACH_TYPE_MMSP2_MDK            1720
+#define MACH_TYPE_MPX220               1721
+#define MACH_TYPE_KZM_ARM11_01         1722
+#define MACH_TYPE_HTC_POLARIS          1723
+#define MACH_TYPE_HTC_KAISER           1724
+#define MACH_TYPE_LG_KS20              1725
+#define MACH_TYPE_HHGPS                1726
+#define MACH_TYPE_NOKIA_N810_WIMAX     1727
+#define MACH_TYPE_INSIGHT              1728
+#define MACH_TYPE_SAPPHIRE             1729
+#define MACH_TYPE_CSB637XO             1730
+#define MACH_TYPE_EVISIONG             1731
+#define MACH_TYPE_STMP37XX             1732
+#define MACH_TYPE_STMP378X             1733
+#define MACH_TYPE_TNT                  1734
+#define MACH_TYPE_TBXT                 1735
+#define MACH_TYPE_PLAYMATE             1736
+#define MACH_TYPE_PNS10                1737
+#define MACH_TYPE_EZNAVI               1738
+#define MACH_TYPE_PS4000               1739
+#define MACH_TYPE_EZX_A780             1740
+#define MACH_TYPE_EZX_E680             1741
+#define MACH_TYPE_EZX_A1200            1742
+#define MACH_TYPE_EZX_E6               1743
+#define MACH_TYPE_EZX_E2               1744
+#define MACH_TYPE_EZX_A910             1745
+#define MACH_TYPE_CWMX31               1746
+#define MACH_TYPE_SL2312               1747
+#define MACH_TYPE_BLENNY               1748
+#define MACH_TYPE_DS107                1749
+#define MACH_TYPE_DSX07                1750
+#define MACH_TYPE_PICOCOM1             1751
+#define MACH_TYPE_LYNX_WOLVERINE       1752
+#define MACH_TYPE_UBISYS_P9_SC19       1753
+#define MACH_TYPE_KRATOS_LOW           1754
+#define MACH_TYPE_M700                 1755
+#define MACH_TYPE_EDMINI_V2            1756
+#define MACH_TYPE_ZIPIT2               1757
+#define MACH_TYPE_HSLFEMTOCELL         1758
+#define MACH_TYPE_DAINTREE_AT91        1759
+#define MACH_TYPE_SG560USB             1760
+#define MACH_TYPE_OMAP3_PANDORA        1761
+#define MACH_TYPE_USR8200              1762
+#define MACH_TYPE_S1S65K               1763
+#define MACH_TYPE_S2S65A               1764
+#define MACH_TYPE_ICORE                1765
+#define MACH_TYPE_MSS2                 1766
+#define MACH_TYPE_BELMONT              1767
+#define MACH_TYPE_ASUSP525             1768
+#define MACH_TYPE_LB88RC8480           1769
+#define MACH_TYPE_HIPXA                1770
+#define MACH_TYPE_MX25_3DS             1771
+#define MACH_TYPE_M800                 1772
+#define MACH_TYPE_OMAP3530_LV_SOM      1773
+#define MACH_TYPE_PRIMA_EVB            1774
+#define MACH_TYPE_MX31BT1              1775
+#define MACH_TYPE_ATLAS4_EVB           1776
+#define MACH_TYPE_MX31CICADA           1777
+#define MACH_TYPE_MI424WR              1778
+#define MACH_TYPE_AXS_ULTRAX           1779
+#define MACH_TYPE_AT572D940DEB         1780
+#define MACH_TYPE_DAVINCI_DA830_EVM    1781
+#define MACH_TYPE_EP9302               1782
+#define MACH_TYPE_AT572D940HFEB        1783
+#define MACH_TYPE_CYBOOK3              1784
+#define MACH_TYPE_WDG002               1785
+#define MACH_TYPE_SG560ADSL            1786
+#define MACH_TYPE_NEXTIO_N2800_ICA     1787
+#define MACH_TYPE_DOVE_DB              1788
+#define MACH_TYPE_VANDIHUD             1790
+#define MACH_TYPE_MAGX_E8              1791
+#define MACH_TYPE_MAGX_Z6              1792
+#define MACH_TYPE_MAGX_V8              1793
+#define MACH_TYPE_MAGX_U9              1794
+#define MACH_TYPE_TOUGHCF08            1795
+#define MACH_TYPE_ZW4400               1796
+#define MACH_TYPE_MARAT91              1797
+#define MACH_TYPE_OVERO                1798
+#define MACH_TYPE_AT2440EVB            1799
+#define MACH_TYPE_NEOCORE926           1800
+#define MACH_TYPE_WNR854T              1801
+#define MACH_TYPE_IMX27                1802
+#define MACH_TYPE_MOOSE_DB             1803
+#define MACH_TYPE_FAB4                 1804
+#define MACH_TYPE_HTCDIAMOND           1805
+#define MACH_TYPE_FIONA                1806
+#define MACH_TYPE_MXC30030_X           1807
+#define MACH_TYPE_BMP1000              1808
+#define MACH_TYPE_LOGI9200             1809
+#define MACH_TYPE_TQMA31               1810
+#define MACH_TYPE_CCW9P9215JS          1811
+#define MACH_TYPE_RD88F5181L_GE        1812
+#define MACH_TYPE_SIFMAIN              1813
+#define MACH_TYPE_SAM9_L9261           1814
+#define MACH_TYPE_CC9M2443             1815
+#define MACH_TYPE_XARIA300             1816
+#define MACH_TYPE_IT9200               1817
+#define MACH_TYPE_RD88F5181L_FXO       1818
+#define MACH_TYPE_KRISS_SENSOR         1819
+#define MACH_TYPE_PILZ_PMI5            1820
+#define MACH_TYPE_JADE                 1821
+#define MACH_TYPE_KS8695_SOFTPLC       1822
+#define MACH_TYPE_GPRISC3              1823
+#define MACH_TYPE_STAMP9G20            1824
+#define MACH_TYPE_SMDK6430             1825
+#define MACH_TYPE_SMDKC100             1826
+#define MACH_TYPE_TAVOREVB             1827
+#define MACH_TYPE_SAAR                 1828
+#define MACH_TYPE_DEISTER_EYECAM       1829
+#define MACH_TYPE_AT91SAM9M10G45EK     1830
+#define MACH_TYPE_LINKSTATION_PRODUO   1831
+#define MACH_TYPE_HIT_B0               1832
+#define MACH_TYPE_ADX_RMU              1833
+#define MACH_TYPE_XG_CPE_MAIN          1834
+#define MACH_TYPE_EDB9407A             1835
+#define MACH_TYPE_DTB9608              1836
+#define MACH_TYPE_EM104V1              1837
+#define MACH_TYPE_DEMO                 1838
+#define MACH_TYPE_LOGI9260             1839
+#define MACH_TYPE_MX31_EXM32           1840
+#define MACH_TYPE_USB_A9G20            1841
+#define MACH_TYPE_PICPROJE2008         1842
+#define MACH_TYPE_CS_E9315             1843
+#define MACH_TYPE_QIL_A9G20            1844
+#define MACH_TYPE_SHA_PON020           1845
+#define MACH_TYPE_NAD                  1846
+#define MACH_TYPE_SBC35_A9260          1847
+#define MACH_TYPE_SBC35_A9G20          1848
+#define MACH_TYPE_DAVINCI_BEGINNING    1849
+#define MACH_TYPE_UWC                  1850
+#define MACH_TYPE_MXLADS               1851
+#define MACH_TYPE_HTCNIKE              1852
+#define MACH_TYPE_DEISTER_PXA270       1853
+#define MACH_TYPE_CME9210JS            1854
+#define MACH_TYPE_CC9P9360             1855
+#define MACH_TYPE_MOCHA                1856
+#define MACH_TYPE_WAPD170AG            1857
+#define MACH_TYPE_LINKSTATION_MINI     1858
+#define MACH_TYPE_AFEB9260             1859
+#define MACH_TYPE_W90X900              1860
+#define MACH_TYPE_W90X700              1861
+#define MACH_TYPE_KT300IP              1862
+#define MACH_TYPE_KT300IP_G20          1863
+#define MACH_TYPE_SRCM                 1864
+#define MACH_TYPE_WLNX_9260            1865
+#define MACH_TYPE_OPENMOKO_GTA03       1866
+#define MACH_TYPE_OSPREY2              1867
+#define MACH_TYPE_KBIO9260             1868
+#define MACH_TYPE_GINZA                1869
+#define MACH_TYPE_A636N                1870
+#define MACH_TYPE_IMX27IPCAM           1871
+#define MACH_TYPE_NEMOC                1872
+#define MACH_TYPE_GENEVA               1873
+#define MACH_TYPE_HTCPHAROS            1874
+#define MACH_TYPE_NEONC                1875
+#define MACH_TYPE_NAS7100              1876
+#define MACH_TYPE_TEUPHONE             1877
+#define MACH_TYPE_ANNAX_ETH2           1878
+#define MACH_TYPE_CSB733               1879
+#define MACH_TYPE_BK3                  1880
+#define MACH_TYPE_OMAP_EM32            1881
+#define MACH_TYPE_ET9261CP             1882
+#define MACH_TYPE_JASPERC              1883
+#define MACH_TYPE_ISSI_ARM9            1884
+#define MACH_TYPE_UED                  1885
+#define MACH_TYPE_ESIBLADE             1886
+#define MACH_TYPE_EYE02                1887
+#define MACH_TYPE_IMX27KBD             1888
+#define MACH_TYPE_KIXVP435             1890
+#define MACH_TYPE_KIXNP435             1891
+#define MACH_TYPE_AFRICA               1892
+#define MACH_TYPE_NH233                1893
+#define MACH_TYPE_RD88F6183AP_GE       1894
+#define MACH_TYPE_BCM4760              1895
+#define MACH_TYPE_EDDY_V2              1896
+#define MACH_TYPE_REALVIEW_PBA8        1897
+#define MACH_TYPE_HID_A7               1898
+#define MACH_TYPE_HERO                 1899
+#define MACH_TYPE_OMAP_POSEIDON        1900
+#define MACH_TYPE_REALVIEW_PBX         1901
+#define MACH_TYPE_MICRO9S              1902
+#define MACH_TYPE_MAKO                 1903
+#define MACH_TYPE_XDAFLAME             1904
+#define MACH_TYPE_PHIDGET_SBC2         1905
+#define MACH_TYPE_LIMESTONE            1906
+#define MACH_TYPE_IPROBE_C32           1907
+#define MACH_TYPE_RUT100               1908
+#define MACH_TYPE_ASUSP535             1909
+#define MACH_TYPE_HTCRAPHAEL           1910
+#define MACH_TYPE_SYGDG1               1911
+#define MACH_TYPE_SYGDG2               1912
+#define MACH_TYPE_SEOUL                1913
+#define MACH_TYPE_SALERNO              1914
+#define MACH_TYPE_UCN_S3C64XX          1915
+#define MACH_TYPE_MSM7201A             1916
+#define MACH_TYPE_LPR1                 1917
+#define MACH_TYPE_ARMADILLO500FX       1918
+#define MACH_TYPE_G3EVM                1919
+#define MACH_TYPE_Z3_DM355             1920
+#define MACH_TYPE_W90P910EVB           1921
+#define MACH_TYPE_W90P920EVB           1922
+#define MACH_TYPE_W90P950EVB           1923
+#define MACH_TYPE_W90N960EVB           1924
+#define MACH_TYPE_CAMHD                1925
+#define MACH_TYPE_MVC100               1926
+#define MACH_TYPE_ELECTRUM_200         1927
+#define MACH_TYPE_HTCJADE              1928
+#define MACH_TYPE_MEMPHIS              1929
+#define MACH_TYPE_IMX27SBC             1930
+#define MACH_TYPE_LEXTAR               1931
+#define MACH_TYPE_MV88F6281GTW_GE      1932
+#define MACH_TYPE_NCP                  1933
+#define MACH_TYPE_Z32AN                1934
+#define MACH_TYPE_TMQ_CAPD             1935
+#define MACH_TYPE_OMAP3_WL             1936
+#define MACH_TYPE_CHUMBY               1937
+#define MACH_TYPE_ATSARM9              1938
+#define MACH_TYPE_DAVINCI_DM365_EVM    1939
+#define MACH_TYPE_BAHAMAS              1940
+#define MACH_TYPE_DAS                  1941
+#define MACH_TYPE_MINIDAS              1942
+#define MACH_TYPE_VK1000               1943
+#define MACH_TYPE_CENTRO               1944
+#define MACH_TYPE_CTERA_2BAY           1945
+#define MACH_TYPE_EDGECONNECT          1946
+#define MACH_TYPE_ND27000              1947
+#define MACH_TYPE_GEMALTO_COBRA        1948
+#define MACH_TYPE_INGELABS_COMET       1949
+#define MACH_TYPE_POLLUX_WIZ           1950
+#define MACH_TYPE_BLACKSTONE           1951
+#define MACH_TYPE_TOPAZ                1952
+#define MACH_TYPE_AIXLE                1953
+#define MACH_TYPE_MW998                1954
+#define MACH_TYPE_NOKIA_RX51           1955
+#define MACH_TYPE_VSC5605EV            1956
+#define MACH_TYPE_NT98700DK            1957
+#define MACH_TYPE_ICONTACT             1958
+#define MACH_TYPE_SWARCO_FRCPU         1959
+#define MACH_TYPE_SWARCO_SCPU          1960
+#define MACH_TYPE_BBOX_P16             1961
+#define MACH_TYPE_BSTD                 1962
+#define MACH_TYPE_SBC2440II            1963
+#define MACH_TYPE_PCM034               1964
+#define MACH_TYPE_NESO                 1965
+#define MACH_TYPE_WLNX_9G20            1966
+#define MACH_TYPE_OMAP_ZOOM2           1967
+#define MACH_TYPE_TOTEMNOVA            1968
+#define MACH_TYPE_C5000                1969
+#define MACH_TYPE_UNIPO_AT91SAM9263    1970
+#define MACH_TYPE_ETHERNUT5            1971
+#define MACH_TYPE_ARM11                1972
+#define MACH_TYPE_CPUAT9260            1973
+#define MACH_TYPE_CPUPXA255            1974
+#define MACH_TYPE_EUKREA_CPUIMX27      1975
+#define MACH_TYPE_CHEFLUX              1976
+#define MACH_TYPE_EB_CPUX9K2           1977
+#define MACH_TYPE_OPCOTEC              1978
+#define MACH_TYPE_YT                   1979
+#define MACH_TYPE_MOTOQ                1980
+#define MACH_TYPE_BSB1                 1981
+#define MACH_TYPE_ACS5K                1982
+#define MACH_TYPE_MILAN                1983
+#define MACH_TYPE_QUARTZV2             1984
+#define MACH_TYPE_RSVP                 1985
+#define MACH_TYPE_RMP200               1986
+#define MACH_TYPE_SNAPPER_9260         1987
+#define MACH_TYPE_DSM320               1988
+#define MACH_TYPE_ADSGCM               1989
+#define MACH_TYPE_ASE2_400             1990
+#define MACH_TYPE_PIZZA                1991
+#define MACH_TYPE_SPOT_NGPL            1992
+#define MACH_TYPE_ARMATA               1993
+#define MACH_TYPE_EXEDA                1994
+#define MACH_TYPE_MX31SF005            1995
+#define MACH_TYPE_F5D8231_4_V2         1996
+#define MACH_TYPE_Q2440                1997
+#define MACH_TYPE_QQ2440               1998
+#define MACH_TYPE_MINI2440             1999
+#define MACH_TYPE_COLIBRI300           2000
+#define MACH_TYPE_JADES                2001
+#define MACH_TYPE_SPARK                2002
+#define MACH_TYPE_BENZINA              2003
+#define MACH_TYPE_BLAZE                2004
+#define MACH_TYPE_LINKSTATION_LS_HGL   2005
+#define MACH_TYPE_HTCKOVSKY            2006
+#define MACH_TYPE_SONY_PRS505          2007
+#define MACH_TYPE_HANLIN_V3            2008
+#define MACH_TYPE_SAPPHIRA             2009
+#define MACH_TYPE_DACK_SDA_01          2010
+#define MACH_TYPE_ARMBOX               2011
+#define MACH_TYPE_HARRIS_RVP           2012
+#define MACH_TYPE_RIBALDO              2013
+#define MACH_TYPE_AGORA                2014
+#define MACH_TYPE_OMAP3_MINI           2015
+#define MACH_TYPE_A9SAM6432_B          2016
+#define MACH_TYPE_USG2410              2017
+#define MACH_TYPE_PC72052_I10_REVB     2018
+#define MACH_TYPE_MX35_EXM32           2019
+#define MACH_TYPE_TOPAS910             2020
+#define MACH_TYPE_HYENA                2021
+#define MACH_TYPE_POSPAX               2022
+#define MACH_TYPE_HDL_GX               2023
+#define MACH_TYPE_CTERA_4BAY           2024
+#define MACH_TYPE_CTERA_PLUG_C         2025
+#define MACH_TYPE_CRWEA_PLUG_I         2026
+#define MACH_TYPE_EGAUGE2              2027
+#define MACH_TYPE_DIDJ                 2028
+#define MACH_TYPE_MEISTER              2029
+#define MACH_TYPE_HTCBLACKSTONE        2030
+#define MACH_TYPE_CPUAT9G20            2031
+#define MACH_TYPE_SMDK6440             2032
+#define MACH_TYPE_OMAP_35XX_MVP        2033
+#define MACH_TYPE_CTERA_PLUG_I         2034
+#define MACH_TYPE_PVG610               2035
+#define MACH_TYPE_HPRW6815             2036
+#define MACH_TYPE_OMAP3_OSWALD         2037
+#define MACH_TYPE_NAS4220B             2038
+#define MACH_TYPE_HTCRAPHAEL_CDMA      2039
+#define MACH_TYPE_HTCDIAMOND_CDMA      2040
+#define MACH_TYPE_SCALER               2041
+#define MACH_TYPE_ZYLONITE2            2042
+#define MACH_TYPE_ASPENITE             2043
+#define MACH_TYPE_TETON                2044
+#define MACH_TYPE_TTC_DKB              2045
+#define MACH_TYPE_BISHOP2              2046
+#define MACH_TYPE_IPPV5                2047
+#define MACH_TYPE_FARM926              2048
+#define MACH_TYPE_MMCCPU               2049
+#define MACH_TYPE_SGMSFL               2050
+#define MACH_TYPE_TT8000               2051
+#define MACH_TYPE_ZRN4300LP            2052
+#define MACH_TYPE_MPTC                 2053
+#define MACH_TYPE_H6051                2054
+#define MACH_TYPE_PVG610_101           2055
+#define MACH_TYPE_STAMP9261_PC_EVB     2056
+#define MACH_TYPE_PELCO_ODYSSEUS       2057
+#define MACH_TYPE_TNY_A9260            2058
+#define MACH_TYPE_TNY_A9G20            2059
+#define MACH_TYPE_AESOP_MP2530F        2060
+#define MACH_TYPE_DX900                2061
+#define MACH_TYPE_CPODC2               2062
+#define MACH_TYPE_TILT_8925            2063
+#define MACH_TYPE_DAVINCI_DM357_EVM    2064
+#define MACH_TYPE_SWORDFISH            2065
+#define MACH_TYPE_CORVUS               2066
+#define MACH_TYPE_TAURUS               2067
+#define MACH_TYPE_AXM                  2068
+#define MACH_TYPE_AXC                  2069
+#define MACH_TYPE_BABY                 2070
+#define MACH_TYPE_MP200                2071
+#define MACH_TYPE_PCM043               2072
+#define MACH_TYPE_HANLIN_V3C           2073
+#define MACH_TYPE_KBK9G20              2074
+#define MACH_TYPE_ADSTURBOG5           2075
+#define MACH_TYPE_AVENGER_LITE1        2076
+#define MACH_TYPE_SUC                  2077
+#define MACH_TYPE_AT91SAM7S256         2078
+#define MACH_TYPE_MENDOZA              2079
+#define MACH_TYPE_KIRA                 2080
+#define MACH_TYPE_MX1HBM               2081
+#define MACH_TYPE_QUATRO43XX           2082
+#define MACH_TYPE_QUATRO4230           2083
+#define MACH_TYPE_NSB400               2084
+#define MACH_TYPE_DRP255               2085
+#define MACH_TYPE_THOTH                2086
+#define MACH_TYPE_FIRESTONE            2087
+#define MACH_TYPE_ASUSP750             2088
+#define MACH_TYPE_CTERA_DL             2089
+#define MACH_TYPE_SOCR                 2090
+#define MACH_TYPE_HTCOXYGEN            2091
+#define MACH_TYPE_HEROC                2092
+#define MACH_TYPE_ZENO6800             2093
+#define MACH_TYPE_SC2MCS               2094
+#define MACH_TYPE_GENE100              2095
+#define MACH_TYPE_AS353X               2096
+#define MACH_TYPE_SHEEVAPLUG           2097
+#define MACH_TYPE_AT91SAM9G20          2098
+#define MACH_TYPE_MV88F6192GTW_FE      2099
+#define MACH_TYPE_CC9200               2100
+#define MACH_TYPE_SM9200               2101
+#define MACH_TYPE_TP9200               2102
+#define MACH_TYPE_SNAPPERDV            2103
+#define MACH_TYPE_AVENGERS_LITE        2104
+#define MACH_TYPE_AVENGERS_LITE1       2105
+#define MACH_TYPE_OMAP3AXON            2106
+#define MACH_TYPE_MA8XX                2107
+#define MACH_TYPE_MP201EK              2108
+#define MACH_TYPE_DAVINCI_TUX          2109
+#define MACH_TYPE_MPA1600              2110
+#define MACH_TYPE_PELCO_TROY           2111
+#define MACH_TYPE_NSB667               2112
+#define MACH_TYPE_ROVERS5_4MPIX        2113
+#define MACH_TYPE_TWOCOM               2114
+#define MACH_TYPE_UBISYS_P9_RCU3R2     2115
+#define MACH_TYPE_HERO_ESPRESSO        2116
+#define MACH_TYPE_AFEUSB               2117
+#define MACH_TYPE_T830                 2118
+#define MACH_TYPE_SPD8020_CC           2119
+#define MACH_TYPE_OM_3D7K              2120
+#define MACH_TYPE_PICOCOM2             2121
+#define MACH_TYPE_UWG4MX27             2122
+#define MACH_TYPE_UWG4MX31             2123
+#define MACH_TYPE_CHERRY               2124
+#define MACH_TYPE_MX51_BABBAGE         2125
+#define MACH_TYPE_S3C2440TURKIYE       2126
+#define MACH_TYPE_TX37                 2127
+#define MACH_TYPE_SBC2800_9G20         2128
+#define MACH_TYPE_BENZGLB              2129
+#define MACH_TYPE_BENZTD               2130
+#define MACH_TYPE_CARTESIO_PLUS        2131
+#define MACH_TYPE_SOLRAD_G20           2132
+#define MACH_TYPE_MX27WALLACE          2133
+#define MACH_TYPE_FMZWEBMODUL          2134
+#define MACH_TYPE_RD78X00_MASA         2135
+#define MACH_TYPE_SMALLOGGER           2136
+#define MACH_TYPE_CCW9P9215            2137
+#define MACH_TYPE_DM355_LEOPARD        2138
+#define MACH_TYPE_TS219                2139
+#define MACH_TYPE_TNY_A9263            2140
+#define MACH_TYPE_APOLLO               2141
+#define MACH_TYPE_AT91CAP9STK          2142
+#define MACH_TYPE_SPC300               2143
+#define MACH_TYPE_EKO                  2144
+#define MACH_TYPE_CCW9M2443            2145
+#define MACH_TYPE_CCW9M2443JS          2146
+#define MACH_TYPE_M2M_ROUTER_DEVICE    2147
+#define MACH_TYPE_STAR9104NAS          2148
+#define MACH_TYPE_PCA100               2149
+#define MACH_TYPE_Z3_DM365_MOD_01      2150
+#define MACH_TYPE_HIPOX                2151
+#define MACH_TYPE_OMAP3_PITEDS         2152
+#define MACH_TYPE_BM150R               2153
+#define MACH_TYPE_TBONE                2154
+#define MACH_TYPE_MERLIN               2155
+#define MACH_TYPE_FALCON               2156
+#define MACH_TYPE_DAVINCI_DA850_EVM    2157
+#define MACH_TYPE_S5P6440              2158
+#define MACH_TYPE_AT91SAM9G10EK        2159
+#define MACH_TYPE_OMAP_4430SDP         2160
+#define MACH_TYPE_LPC313X              2161
+#define MACH_TYPE_MAGX_ZN5             2162
+#define MACH_TYPE_MAGX_EM30            2163
+#define MACH_TYPE_MAGX_VE66            2164
+#define MACH_TYPE_MEESC                2165
+#define MACH_TYPE_OTC570               2166
+#define MACH_TYPE_BCU2412              2167
+#define MACH_TYPE_BEACON               2168
+#define MACH_TYPE_ACTIA_TGW            2169
+#define MACH_TYPE_E4430                2170
+#define MACH_TYPE_QL300                2171
+#define MACH_TYPE_BTMAVB101            2172
+#define MACH_TYPE_BTMAWB101            2173
+#define MACH_TYPE_SQ201                2174
+#define MACH_TYPE_QUATRO45XX           2175
+#define MACH_TYPE_OPENPAD              2176
+#define MACH_TYPE_TX25                 2177
+#define MACH_TYPE_OMAP3_TORPEDO        2178
+#define MACH_TYPE_HTCRAPHAEL_K         2179
+#define MACH_TYPE_LAL43                2181
+#define MACH_TYPE_HTCRAPHAEL_CDMA500   2182
+#define MACH_TYPE_ANW6410              2183
+#define MACH_TYPE_HTCPROPHET           2185
+#define MACH_TYPE_CFA_10022            2186
+#define MACH_TYPE_IMX27_VISSTRIM_M10   2187
+#define MACH_TYPE_PX2IMX27             2188
+#define MACH_TYPE_STM3210E_EVAL        2189
+#define MACH_TYPE_DVS10                2190
+#define MACH_TYPE_PORTUXG20            2191
+#define MACH_TYPE_ARM_SPV              2192
+#define MACH_TYPE_SMDKC110             2193
+#define MACH_TYPE_CABESPRESSO          2194
+#define MACH_TYPE_HMC800               2195
+#define MACH_TYPE_SHOLES               2196
+#define MACH_TYPE_BTMXC31              2197
+#define MACH_TYPE_DT501                2198
+#define MACH_TYPE_KTX                  2199
+#define MACH_TYPE_OMAP3517EVM          2200
+#define MACH_TYPE_NETSPACE_V2          2201
+#define MACH_TYPE_NETSPACE_MAX_V2      2202
+#define MACH_TYPE_D2NET_V2             2203
+#define MACH_TYPE_NET2BIG_V2           2204
+#define MACH_TYPE_NET4BIG_V2           2205
+#define MACH_TYPE_NET5BIG_V2           2206
+#define MACH_TYPE_ENDB2443             2207
+#define MACH_TYPE_INETSPACE_V2         2208
+#define MACH_TYPE_TROS                 2209
+#define MACH_TYPE_PELCO_HOMER          2210
+#define MACH_TYPE_OFSP8                2211
+#define MACH_TYPE_AT91SAM9G45EKES      2212
+#define MACH_TYPE_GUF_CUPID            2213
+#define MACH_TYPE_EAB1R                2214
+#define MACH_TYPE_DESIREC              2215
+#define MACH_TYPE_CORDOBA              2216
+#define MACH_TYPE_IRVINE               2217
+#define MACH_TYPE_SFF772               2218
+#define MACH_TYPE_PELCO_MILANO         2219
+#define MACH_TYPE_PC7302               2220
+#define MACH_TYPE_BIP6000              2221
+#define MACH_TYPE_SILVERMOON           2222
+#define MACH_TYPE_VC0830               2223
+#define MACH_TYPE_DT430                2224
+#define MACH_TYPE_JI42PF               2225
+#define MACH_TYPE_GNET_KSM             2226
+#define MACH_TYPE_GNET_SGM             2227
+#define MACH_TYPE_GNET_SGR             2228
+#define MACH_TYPE_OMAP3_ICETEKEVM      2229
+#define MACH_TYPE_PNP                  2230
+#define MACH_TYPE_CTERA_2BAY_K         2231
+#define MACH_TYPE_CTERA_2BAY_U         2232
+#define MACH_TYPE_SAS_C                2233
+#define MACH_TYPE_VMA2315              2234
+#define MACH_TYPE_VCS                  2235
+#define MACH_TYPE_SPEAR600             2236
+#define MACH_TYPE_SPEAR300             2237
+#define MACH_TYPE_SPEAR1300            2238
+#define MACH_TYPE_LILLY1131            2239
+#define MACH_TYPE_ARVOO_AX301          2240
+#define MACH_TYPE_MAPPHONE             2241
+#define MACH_TYPE_LEGEND               2242
+#define MACH_TYPE_SALSA                2243
+#define MACH_TYPE_LOUNGE               2244
+#define MACH_TYPE_VISION               2245
+#define MACH_TYPE_VMB20                2246
+#define MACH_TYPE_HY2410               2247
+#define MACH_TYPE_HY9315               2248
+#define MACH_TYPE_BULLWINKLE           2249
+#define MACH_TYPE_ARM_ULTIMATOR2       2250
+#define MACH_TYPE_VS_V210              2252
+#define MACH_TYPE_VS_V212              2253
+#define MACH_TYPE_HMT                  2254
+#define MACH_TYPE_KM_KIRKWOOD          2255
+#define MACH_TYPE_VESPER               2256
+#define MACH_TYPE_STR9                 2257
+#define MACH_TYPE_OMAP3_WL_FF          2258
+#define MACH_TYPE_SIMCOM               2259
+#define MACH_TYPE_MCWEBIO              2260
+#define MACH_TYPE_OMAP3_PHRAZER        2261
+#define MACH_TYPE_DARWIN               2262
+#define MACH_TYPE_ORATISCOMU           2263
+#define MACH_TYPE_RTSBC20              2264
+#define MACH_TYPE_I780                 2265
+#define MACH_TYPE_GEMINI324            2266
+#define MACH_TYPE_ORATISLAN            2267
+#define MACH_TYPE_ORATISALOG           2268
+#define MACH_TYPE_ORATISMADI           2269
+#define MACH_TYPE_ORATISOT16           2270
+#define MACH_TYPE_ORATISDESK           2271
+#define MACH_TYPE_VEXPRESS             2272
+#define MACH_TYPE_SINTEXO              2273
+#define MACH_TYPE_CM3389               2274
+#define MACH_TYPE_OMAP3_CIO            2275
+#define MACH_TYPE_SGH_I900             2276
+#define MACH_TYPE_BST100               2277
+#define MACH_TYPE_PASSION              2278
+#define MACH_TYPE_INDESIGN_AT91SAM     2279
+#define MACH_TYPE_C4_BADGER            2280
+#define MACH_TYPE_C4_VIPER             2281
+#define MACH_TYPE_D2NET                2282
+#define MACH_TYPE_BIGDISK              2283
+#define MACH_TYPE_NOTALVISION          2284
+#define MACH_TYPE_OMAP3_KBOC           2285
+#define MACH_TYPE_CYCLONE              2286
+#define MACH_TYPE_NINJA                2287
+#define MACH_TYPE_AT91SAM9G20EK_2MMC   2288
+#define MACH_TYPE_BCMRING              2289
+#define MACH_TYPE_RESOL_DL2            2290
+#define MACH_TYPE_IFOSW                2291
+#define MACH_TYPE_HTCRHODIUM           2292
+#define MACH_TYPE_HTCTOPAZ             2293
+#define MACH_TYPE_MATRIX504            2294
+#define MACH_TYPE_MRFSA                2295
+#define MACH_TYPE_SC_P270              2296
+#define MACH_TYPE_ATLAS5_EVB           2297
+#define MACH_TYPE_PELCO_LOBOX          2298
+#define MACH_TYPE_DILAX_PCU200         2299
+#define MACH_TYPE_LEONARDO             2300
+#define MACH_TYPE_ZORAN_APPROACH7      2301
+#define MACH_TYPE_DP6XX                2302
+#define MACH_TYPE_BCM2153_VESPER       2303
+#define MACH_TYPE_MAHIMAHI             2304
+#define MACH_TYPE_CLICKC               2305
+#define MACH_TYPE_ZB_GATEWAY           2306
+#define MACH_TYPE_TAZCARD              2307
+#define MACH_TYPE_TAZDEV               2308
+#define MACH_TYPE_ANNAX_CB_ARM         2309
+#define MACH_TYPE_ANNAX_DM3            2310
+#define MACH_TYPE_CEREBRIC             2311
+#define MACH_TYPE_ORCA                 2312
+#define MACH_TYPE_PC9260               2313
+#define MACH_TYPE_EMS285A              2314
+#define MACH_TYPE_GEC2410              2315
+#define MACH_TYPE_GEC2440              2316
+#define MACH_TYPE_ARCH_MW903           2317
+#define MACH_TYPE_MW2440               2318
+#define MACH_TYPE_ECAC2378             2319
+#define MACH_TYPE_TAZKIOSK             2320
+#define MACH_TYPE_WHITERABBIT_MCH      2321
+#define MACH_TYPE_SBOX9263             2322
+#define MACH_TYPE_SMDK6442             2324
+#define MACH_TYPE_OPENRD_BASE          2325
+#define MACH_TYPE_INCREDIBLE           2326
+#define MACH_TYPE_INCREDIBLEC          2327
+#define MACH_TYPE_HEROCT               2328
+#define MACH_TYPE_MMNET1000            2329
+#define MACH_TYPE_DEVKIT8000           2330
+#define MACH_TYPE_DEVKIT9000           2331
+#define MACH_TYPE_MX31TXTR             2332
+#define MACH_TYPE_U380                 2333
+#define MACH_TYPE_HUALU_BOARD          2334
+#define MACH_TYPE_NPCMX50              2335
+#define MACH_TYPE_MX51_EFIKAMX         2336
+#define MACH_TYPE_MX51_LANGE52         2337
+#define MACH_TYPE_RIOM                 2338
+#define MACH_TYPE_COMCAS               2339
+#define MACH_TYPE_WSI_MX27             2340
+#define MACH_TYPE_CM_T35               2341
+#define MACH_TYPE_NET2BIG              2342
+#define MACH_TYPE_MOTOROLA_A1600       2343
+#define MACH_TYPE_IGEP0020             2344
+#define MACH_TYPE_IGEP0010             2345
+#define MACH_TYPE_MV6281GTWGE2         2346
+#define MACH_TYPE_SCAT100              2347
+#define MACH_TYPE_SANMINA              2348
+#define MACH_TYPE_MOMENTO              2349
+#define MACH_TYPE_NUC9XX               2350
+#define MACH_TYPE_NUC910EVB            2351
+#define MACH_TYPE_NUC920EVB            2352
+#define MACH_TYPE_NUC950EVB            2353
+#define MACH_TYPE_NUC945EVB            2354
+#define MACH_TYPE_NUC960EVB            2355
+#define MACH_TYPE_NUC932EVB            2356
+#define MACH_TYPE_NUC900               2357
+#define MACH_TYPE_SD1SOC               2358
+#define MACH_TYPE_LN2440BC             2359
+#define MACH_TYPE_RSBC                 2360
+#define MACH_TYPE_OPENRD_CLIENT        2361
+#define MACH_TYPE_HPIPAQ11X            2362
+#define MACH_TYPE_WAYLAND              2363
+#define MACH_TYPE_ACNBSX102            2364
+#define MACH_TYPE_HWAT91               2365
+#define MACH_TYPE_AT91SAM9263CS        2366
+#define MACH_TYPE_CSB732               2367
+#define MACH_TYPE_U8500                2368
+#define MACH_TYPE_HUQIU                2369
+#define MACH_TYPE_MX51_EFIKASB         2370
+#define MACH_TYPE_PMT1G                2371
+#define MACH_TYPE_HTCELF               2372
+#define MACH_TYPE_ARMADILLO420         2373
+#define MACH_TYPE_ARMADILLO440         2374
+#define MACH_TYPE_U_CHIP_DUAL_ARM      2375
+#define MACH_TYPE_CSR_BDB3             2376
+#define MACH_TYPE_DOLBY_CAT1018        2377
+#define MACH_TYPE_HY9307               2378
+#define MACH_TYPE_A_ES                 2379
+#define MACH_TYPE_DAVINCI_IRIF         2380
+#define MACH_TYPE_AGAMA9263            2381
+#define MACH_TYPE_MARVELL_JASPER       2382
+#define MACH_TYPE_FLINT                2383
+#define MACH_TYPE_TAVOREVB3            2384
+#define MACH_TYPE_SCH_M490             2386
+#define MACH_TYPE_RBL01                2387
+#define MACH_TYPE_OMNIFI               2388
+#define MACH_TYPE_OTAVALO              2389
+#define MACH_TYPE_HTC_EXCALIBUR_S620   2391
+#define MACH_TYPE_HTC_OPAL             2392
+#define MACH_TYPE_TOUCHBOOK            2393
+#define MACH_TYPE_LATTE                2394
+#define MACH_TYPE_XA200                2395
+#define MACH_TYPE_NIMROD               2396
+#define MACH_TYPE_CC9P9215_3G          2397
+#define MACH_TYPE_CC9P9215_3GJS        2398
+#define MACH_TYPE_TK71                 2399
+#define MACH_TYPE_COMHAM3525           2400
+#define MACH_TYPE_MX31EREBUS           2401
+#define MACH_TYPE_MCARDMX27            2402
+#define MACH_TYPE_PARADISE             2403
+#define MACH_TYPE_TIDE                 2404
+#define MACH_TYPE_WZL2440              2405
+#define MACH_TYPE_SDRDEMO              2406
+#define MACH_TYPE_ETHERCAN2            2407
+#define MACH_TYPE_ECMIMG20             2408
+#define MACH_TYPE_OMAP_DRAGON          2409
+#define MACH_TYPE_HALO                 2410
+#define MACH_TYPE_HUANGSHAN            2411
+#define MACH_TYPE_VL_MA2SC             2412
+#define MACH_TYPE_RAUMFELD_RC          2413
+#define MACH_TYPE_RAUMFELD_CONNECTOR   2414
+#define MACH_TYPE_RAUMFELD_SPEAKER     2415
+#define MACH_TYPE_MULTIBUS_MASTER      2416
+#define MACH_TYPE_MULTIBUS_PBK         2417
+#define MACH_TYPE_TNETV107X            2418
+#define MACH_TYPE_SNAKE                2419
+#define MACH_TYPE_CWMX27               2420
+#define MACH_TYPE_SCH_M480             2421
+#define MACH_TYPE_PLATYPUS             2422
+#define MACH_TYPE_PSS2                 2423
+#define MACH_TYPE_DAVINCI_APM150       2424
+#define MACH_TYPE_STR9100              2425
+#define MACH_TYPE_NET5BIG              2426
+#define MACH_TYPE_SEABED9263           2427
+#define MACH_TYPE_MX51_M2ID            2428
+#define MACH_TYPE_OCTVOCPLUS_EB        2429
+#define MACH_TYPE_KLK_FIREFOX          2430
+#define MACH_TYPE_KLK_WIRMA_MODULE     2431
+#define MACH_TYPE_KLK_WIRMA_MMI        2432
+#define MACH_TYPE_SUPERSONIC           2433
+#define MACH_TYPE_LIBERTY              2434
+#define MACH_TYPE_MH355                2435
+#define MACH_TYPE_PC7802               2436
+#define MACH_TYPE_GNET_SGC             2437
+#define MACH_TYPE_EINSTEIN15           2438
+#define MACH_TYPE_CMPD                 2439
+#define MACH_TYPE_DAVINCI_HASE1        2440
+#define MACH_TYPE_LGEINCITEPHONE       2441
+#define MACH_TYPE_EA313X               2442
+#define MACH_TYPE_FWBD_39064           2443
+#define MACH_TYPE_FWBD_390128          2444
+#define MACH_TYPE_PELCO_MOE            2445
+#define MACH_TYPE_MINIMIX27            2446
+#define MACH_TYPE_OMAP3_THUNDER        2447
+#define MACH_TYPE_PASSIONC             2448
+#define MACH_TYPE_MX27AMATA            2449
+#define MACH_TYPE_BGAT1                2450
+#define MACH_TYPE_BUZZ                 2451
+#define MACH_TYPE_MB9G20               2452
+#define MACH_TYPE_YUSHAN               2453
+#define MACH_TYPE_LIZARD               2454
+#define MACH_TYPE_OMAP3POLYCOM         2455
+#define MACH_TYPE_SMDKV210             2456
+#define MACH_TYPE_BRAVO                2457
+#define MACH_TYPE_SIOGENTOO1           2458
+#define MACH_TYPE_SIOGENTOO2           2459
+#define MACH_TYPE_SM3K                 2460
+#define MACH_TYPE_ACER_TEMPO_F900      2461
+#define MACH_TYPE_GLITTERTIND          2463
+#define MACH_TYPE_OMAP_ZOOM3           2464
+#define MACH_TYPE_OMAP_3630SDP         2465
+#define MACH_TYPE_CYBOOK2440           2466
+#define MACH_TYPE_TORINO_S             2467
+#define MACH_TYPE_HAVANA               2468
+#define MACH_TYPE_BEAUMONT_11          2469
+#define MACH_TYPE_VANGUARD             2470
+#define MACH_TYPE_S5PC110_DRACO        2471
+#define MACH_TYPE_CARTESIO_TWO         2472
+#define MACH_TYPE_ASTER                2473
+#define MACH_TYPE_VOGUESV210           2474
+#define MACH_TYPE_ACM500X              2475
+#define MACH_TYPE_KM9260               2476
+#define MACH_TYPE_NIDEFLEXG1           2477
+#define MACH_TYPE_CTERA_PLUG_IO        2478
+#define MACH_TYPE_SMARTQ7              2479
+#define MACH_TYPE_AT91SAM9G10EK2       2480
+#define MACH_TYPE_ASUSP527             2481
+#define MACH_TYPE_AT91SAM9G20MPM2      2482
+#define MACH_TYPE_TOPASA900            2483
+#define MACH_TYPE_ELECTRUM_100         2484
+#define MACH_TYPE_MX51GRB              2485
+#define MACH_TYPE_XEA300               2486
+#define MACH_TYPE_HTCSTARTREK          2487
+#define MACH_TYPE_LIMA                 2488
+#define MACH_TYPE_CSB740               2489
+#define MACH_TYPE_USB_S8815            2490
+#define MACH_TYPE_WATSON_EFM_PLUGIN    2491
+#define MACH_TYPE_MILKYWAY             2492
+#define MACH_TYPE_G4EVM                2493
+#define MACH_TYPE_PICOMOD6             2494
+#define MACH_TYPE_OMAPL138_HAWKBOARD   2495
+#define MACH_TYPE_IP6000               2496
+#define MACH_TYPE_IP6010               2497
+#define MACH_TYPE_UTM400               2498
+#define MACH_TYPE_OMAP3_ZYBEX          2499
+#define MACH_TYPE_WIRELESS_SPACE       2500
+#define MACH_TYPE_SX560                2501
+#define MACH_TYPE_TS41X                2502
+#define MACH_TYPE_ELPHEL10373          2503
+#define MACH_TYPE_RHOBOT               2504
+#define MACH_TYPE_MX51_REFRESH         2505
+#define MACH_TYPE_LS9260               2506
+#define MACH_TYPE_SHANK                2507
+#define MACH_TYPE_QSD8X50_ST1          2508
+#define MACH_TYPE_AT91SAM9M10EKES      2509
+#define MACH_TYPE_HIRAM                2510
+#define MACH_TYPE_PHY3250              2511
+#define MACH_TYPE_EA3250               2512
+#define MACH_TYPE_FDI3250              2513
+#define MACH_TYPE_AT91SAM9263NIT       2515
+#define MACH_TYPE_CCMX51               2516
+#define MACH_TYPE_CCMX51JS             2517
+#define MACH_TYPE_CCWMX51              2518
+#define MACH_TYPE_CCWMX51JS            2519
+#define MACH_TYPE_MINI6410             2520
+#define MACH_TYPE_TINY6410             2521
+#define MACH_TYPE_NANO6410             2522
+#define MACH_TYPE_AT572D940HFNLDB      2523
+#define MACH_TYPE_HTCLEO               2524
+#define MACH_TYPE_AVP13                2525
+#define MACH_TYPE_XXSVIDEOD            2526
+#define MACH_TYPE_VPNEXT               2527
+#define MACH_TYPE_SWARCO_ITC3          2528
+#define MACH_TYPE_TX51                 2529
+#define MACH_TYPE_DOLBY_CAT1021        2530
+#define MACH_TYPE_MX28EVK              2531
+#define MACH_TYPE_PHOENIX260           2532
+#define MACH_TYPE_UVACA_STORK          2533
+#define MACH_TYPE_SMARTQ5              2534
+#define MACH_TYPE_ALL3078              2535
+#define MACH_TYPE_CTERA_2BAY_DS        2536
+#define MACH_TYPE_SIOGENTOO3           2537
+#define MACH_TYPE_EPB5000              2538
+#define MACH_TYPE_HY9263               2539
+#define MACH_TYPE_ACER_TEMPO_M900      2540
+#define MACH_TYPE_ACER_TEMPO_DX900     2541
+#define MACH_TYPE_ACER_TEMPO_X960      2542
+#define MACH_TYPE_ACER_ETEN_V900       2543
+#define MACH_TYPE_ACER_ETEN_X900       2544
+#define MACH_TYPE_BONNELL              2545
+#define MACH_TYPE_OHT_MX27             2546
+#define MACH_TYPE_HTCQUARTZ            2547
+#define MACH_TYPE_DAVINCI_DM6467TEVM   2548
+#define MACH_TYPE_C3AX03               2549
+#define MACH_TYPE_MXT_TD60             2550
+#define MACH_TYPE_ESYX                 2551
+#define MACH_TYPE_DOVE_DB2             2552
+#define MACH_TYPE_BULLDOG              2553
+#define MACH_TYPE_DERELL_ME2000        2554
+#define MACH_TYPE_BCMRING_BASE         2555
+#define MACH_TYPE_BCMRING_EVM          2556
+#define MACH_TYPE_BCMRING_EVM_JAZZ     2557
+#define MACH_TYPE_BCMRING_SP           2558
+#define MACH_TYPE_BCMRING_SV           2559
+#define MACH_TYPE_BCMRING_SV_JAZZ      2560
+#define MACH_TYPE_BCMRING_TABLET       2561
+#define MACH_TYPE_BCMRING_VP           2562
+#define MACH_TYPE_BCMRING_EVM_SEIKOR   2563
+#define MACH_TYPE_BCMRING_SP_WQVGA     2564
+#define MACH_TYPE_BCMRING_CUSTOM       2565
+#define MACH_TYPE_ACER_S200            2566
+#define MACH_TYPE_BT270                2567
+#define MACH_TYPE_ISEO                 2568
+#define MACH_TYPE_CEZANNE              2569
+#define MACH_TYPE_LUCCA                2570
+#define MACH_TYPE_SUPERSMART           2571
+#define MACH_TYPE_CS_MISANO            2572
+#define MACH_TYPE_MAGNOLIA2            2573
+#define MACH_TYPE_EMXX                 2574
+#define MACH_TYPE_OUTLAW               2575
+#define MACH_TYPE_RIOT_BEI2            2576
+#define MACH_TYPE_RIOT_VOX             2577
+#define MACH_TYPE_RIOT_X37             2578
+#define MACH_TYPE_MEGA25MX             2579
+#define MACH_TYPE_BENZINA2             2580
+#define MACH_TYPE_IGNITE               2581
+#define MACH_TYPE_FOGGIA               2582
+#define MACH_TYPE_AREZZO               2583
+#define MACH_TYPE_LEICA_SKYWALKER      2584
+#define MACH_TYPE_JACINTO2_JAMR        2585
+#define MACH_TYPE_GTS_NOVA             2586
+#define MACH_TYPE_P3600                2587
+#define MACH_TYPE_DLT2                 2588
+#define MACH_TYPE_DF3120               2589
+#define MACH_TYPE_ECUCORE_9G20         2590
+#define MACH_TYPE_NAUTEL_LPC3240       2591
+#define MACH_TYPE_GLACIER              2592
+#define MACH_TYPE_PHRAZER_BULLDOG      2593
+#define MACH_TYPE_OMAP3_BULLDOG        2594
+#define MACH_TYPE_PCA101               2595
+#define MACH_TYPE_BUZZC                2596
+#define MACH_TYPE_SASIE2               2597
+#define MACH_TYPE_SMARTMETER_DL        2599
+#define MACH_TYPE_WZL6410              2600
+#define MACH_TYPE_WZL6410M             2601
+#define MACH_TYPE_WZL6410F             2602
+#define MACH_TYPE_WZL6410I             2603
+#define MACH_TYPE_SPACECOM1            2604
+#define MACH_TYPE_PINGU920             2605
+#define MACH_TYPE_BRAVOC               2606
+#define MACH_TYPE_VDSSW                2608
+#define MACH_TYPE_ROMULUS              2609
+#define MACH_TYPE_OMAP_MAGIC           2610
+#define MACH_TYPE_ELTD100              2611
+#define MACH_TYPE_CAPC7117             2612
+#define MACH_TYPE_SWAN                 2613
+#define MACH_TYPE_VEU                  2614
+#define MACH_TYPE_RM2                  2615
+#define MACH_TYPE_TT2100               2616
+#define MACH_TYPE_VENICE               2617
+#define MACH_TYPE_PC7323               2618
+#define MACH_TYPE_MASP                 2619
+#define MACH_TYPE_FUJITSU_TVSTBSOC     2620
+#define MACH_TYPE_FUJITSU_TVSTBSOC1    2621
+#define MACH_TYPE_LEXIKON              2622
+#define MACH_TYPE_MINI2440V2           2623
+#define MACH_TYPE_ICONTROL             2624
+#define MACH_TYPE_GPLUGD               2625
+#define MACH_TYPE_QSD8X50A_ST1_1       2626
+#define MACH_TYPE_QSD8X50A_ST1_5       2627
+#define MACH_TYPE_BEE                  2628
+#define MACH_TYPE_MX23EVK              2629
+#define MACH_TYPE_AP4EVB               2630
+#define MACH_TYPE_STOCKHOLM            2631
+#define MACH_TYPE_LPC_H3131            2632
+#define MACH_TYPE_STINGRAY             2633
+#define MACH_TYPE_KRAKEN               2634
+#define MACH_TYPE_GW2388               2635
+#define MACH_TYPE_JADECPU              2636
+#define MACH_TYPE_CARLISLE             2637
+#define MACH_TYPE_LUX_SF9              2638
+#define MACH_TYPE_NEMID_TB             2639
+#define MACH_TYPE_TERRIER              2640
+#define MACH_TYPE_TURBOT               2641
+#define MACH_TYPE_SANDDAB              2642
+#define MACH_TYPE_MX35_CICADA          2643
+#define MACH_TYPE_GHI2703D             2644
+#define MACH_TYPE_LUX_SFX9             2645
+#define MACH_TYPE_LUX_SF9G             2646
+#define MACH_TYPE_LUX_EDK9             2647
+#define MACH_TYPE_HW90240              2648
+#define MACH_TYPE_DM365_LEOPARD        2649
+#define MACH_TYPE_MITYOMAPL138         2650
+#define MACH_TYPE_SCAT110              2651
+#define MACH_TYPE_ACER_A1              2652
+#define MACH_TYPE_CMCONTROL            2653
+#define MACH_TYPE_PELCO_LAMAR          2654
+#define MACH_TYPE_RFP43                2655
+#define MACH_TYPE_SK86R0301            2656
+#define MACH_TYPE_CTPXA                2657
+#define MACH_TYPE_EPB_ARM9_A           2658
+#define MACH_TYPE_GURUPLUG             2659
+#define MACH_TYPE_SPEAR310             2660
+#define MACH_TYPE_SPEAR320             2661
+#define MACH_TYPE_ROBOTX               2662
+#define MACH_TYPE_LSXHL                2663
+#define MACH_TYPE_SMARTLITE            2664
+#define MACH_TYPE_CWS2                 2665
+#define MACH_TYPE_M619                 2666
+#define MACH_TYPE_SMARTVIEW            2667
+#define MACH_TYPE_LSA_SALSA            2668
+#define MACH_TYPE_KIZBOX               2669
+#define MACH_TYPE_HTCCHARMER           2670
+#define MACH_TYPE_GUF_NESO_LT          2671
+#define MACH_TYPE_PM9G45               2672
+#define MACH_TYPE_HTCPANTHER           2673
+#define MACH_TYPE_HTCPANTHER_CDMA      2674
+#define MACH_TYPE_REB01                2675
+#define MACH_TYPE_AQUILA               2676
+#define MACH_TYPE_SPARK_SLS_HW2        2677
+#define MACH_TYPE_ESATA_SHEEVAPLUG     2678
+#define MACH_TYPE_MSM7X30_SURF         2679
+#define MACH_TYPE_MICRO2440            2680
+#define MACH_TYPE_AM2440               2681
+#define MACH_TYPE_TQ2440               2682
+#define MACH_TYPE_EA2478DEVKIT         2683
+#define MACH_TYPE_AK880X               2684
+#define MACH_TYPE_COBRA3530            2685
+#define MACH_TYPE_PMPPB                2686
+#define MACH_TYPE_U6715                2687
+#define MACH_TYPE_AXAR1500_SENDER      2688
+#define MACH_TYPE_G30_DVB              2689
+#define MACH_TYPE_VC088X               2690
+#define MACH_TYPE_MIOA702              2691
+#define MACH_TYPE_HPMIN                2692
+#define MACH_TYPE_AK880XAK             2693
+#define MACH_TYPE_ARM926TOMAP850       2694
+#define MACH_TYPE_LKEVM                2695
+#define MACH_TYPE_MW6410               2696
+#define MACH_TYPE_TERASTATION_WXL      2697
+#define MACH_TYPE_CPU8000E             2698
+#define MACH_TYPE_TOKYO                2700
+#define MACH_TYPE_MSM7201A_SURF        2701
+#define MACH_TYPE_MSM7201A_FFA         2702
+#define MACH_TYPE_MSM7X25_SURF         2703
+#define MACH_TYPE_MSM7X25_FFA          2704
+#define MACH_TYPE_MSM7X27_SURF         2705
+#define MACH_TYPE_MSM7X27_FFA          2706
+#define MACH_TYPE_MSM7X30_FFA          2707
+#define MACH_TYPE_QSD8X50_SURF         2708
+#define MACH_TYPE_QSD8X50_COMET        2709
+#define MACH_TYPE_QSD8X50_FFA          2710
+#define MACH_TYPE_QSD8X50A_SURF        2711
+#define MACH_TYPE_QSD8X50A_FFA         2712
+#define MACH_TYPE_ADX_XGCP10           2713
+#define MACH_TYPE_MCGWUMTS2A           2714
+#define MACH_TYPE_MOBIKT               2715
+#define MACH_TYPE_MX53_EVK             2716
+#define MACH_TYPE_IGEP0030             2717
+#define MACH_TYPE_AXELL_H40_H50_CTRL   2718
+#define MACH_TYPE_DTCOMMOD             2719
+#define MACH_TYPE_GOULD                2720
+#define MACH_TYPE_SIBERIA              2721
+#define MACH_TYPE_SBC3530              2722
+#define MACH_TYPE_QARM                 2723
+#define MACH_TYPE_MIPS                 2724
+#define MACH_TYPE_MX27GRB              2725
+#define MACH_TYPE_SBC8100              2726
+#define MACH_TYPE_SAARB                2727
+#define MACH_TYPE_OMAP3MINI            2728
+#define MACH_TYPE_CNMBOOK7SE           2729
+#define MACH_TYPE_CATAN                2730
+#define MACH_TYPE_HARMONY              2731
+#define MACH_TYPE_TONGA                2732
+#define MACH_TYPE_CYBOOK_ORIZON        2733
+#define MACH_TYPE_HTCRHODIUMCDMA       2734
+#define MACH_TYPE_EPC_G45              2735
+#define MACH_TYPE_EPC_LPC3250          2736
+#define MACH_TYPE_MXC91341EVB          2737
+#define MACH_TYPE_RTW1000              2738
+#define MACH_TYPE_BOBCAT               2739
+#define MACH_TYPE_TRIZEPS6             2740
+#define MACH_TYPE_MSM7X30_FLUID        2741
+#define MACH_TYPE_NEDAP9263            2742
+#define MACH_TYPE_NETGEAR_MS2110       2743
+#define MACH_TYPE_BMX                  2744
+#define MACH_TYPE_NETSTREAM            2745
+#define MACH_TYPE_VPNEXT_RCU           2746
+#define MACH_TYPE_VPNEXT_MPU           2747
+#define MACH_TYPE_BCMRING_TABLET_V1    2748
+#define MACH_TYPE_SGARM10              2749
+#define MACH_TYPE_OMAP3_CPS            2751
+#define MACH_TYPE_AXAR1500_RECEIVER    2752
+#define MACH_TYPE_WBD222               2753
+#define MACH_TYPE_MT65XX               2754
+#define MACH_TYPE_MSM8X60_SURF         2755
+#define MACH_TYPE_MSM8X60_SIM          2756
+#define MACH_TYPE_TCC8000_SDK          2758
+#define MACH_TYPE_NANOS                2759
+#define MACH_TYPE_STAMP9G10            2760
+#define MACH_TYPE_STAMP9G45            2761
+#define MACH_TYPE_H6053                2762
+#define MACH_TYPE_SMINT01              2763
+#define MACH_TYPE_PRTLVT2              2764
+#define MACH_TYPE_AP420                2765
+#define MACH_TYPE_DAVINCI_DM365_FC     2767
+#define MACH_TYPE_MSM8X55_SURF         2768
+#define MACH_TYPE_MSM8X55_FFA          2769
+#define MACH_TYPE_ESL_VAMANA           2770
+#define MACH_TYPE_SBC35                2771
+#define MACH_TYPE_MPX6446              2772
+#define MACH_TYPE_OREO_CONTROLLER      2773
+#define MACH_TYPE_KOPIN_MODELS         2774
+#define MACH_TYPE_TTC_VISION2          2775
+#define MACH_TYPE_CNS3420VB            2776
+#define MACH_TYPE_LPC2                 2777
+#define MACH_TYPE_OLYMPUS              2778
+#define MACH_TYPE_VORTEX               2779
+#define MACH_TYPE_S5PC200              2780
+#define MACH_TYPE_ECUCORE_9263         2781
+#define MACH_TYPE_SMDKC200             2782
+#define MACH_TYPE_EMSISO_SX27          2783
+#define MACH_TYPE_APX_SOM9G45_EK       2784
+#define MACH_TYPE_SONGSHAN             2785
+#define MACH_TYPE_TIANSHAN             2786
+#define MACH_TYPE_VPX500               2787
+#define MACH_TYPE_AM3517SAM            2788
+#define MACH_TYPE_SKAT91_SIM508        2789
+#define MACH_TYPE_SKAT91_S3E           2790
+#define MACH_TYPE_OMAP4_PANDA          2791
+#define MACH_TYPE_DF7220               2792
+#define MACH_TYPE_NEMINI               2793
+#define MACH_TYPE_T8200                2794
+#define MACH_TYPE_APF51                2795
+#define MACH_TYPE_DR_RC_UNIT           2796
+#define MACH_TYPE_BORDEAUX             2797
+#define MACH_TYPE_CATANIA_B            2798
+#define MACH_TYPE_MX51_OCEAN           2799
+#define MACH_TYPE_TI8168EVM            2800
+#define MACH_TYPE_NEOCOREOMAP          2801
+#define MACH_TYPE_WITHINGS_WBP         2802
+#define MACH_TYPE_DBPS                 2803
+#define MACH_TYPE_PCBFP0001            2805
+#define MACH_TYPE_SPEEDY               2806
+#define MACH_TYPE_CHRYSAOR             2807
+#define MACH_TYPE_TANGO                2808
+#define MACH_TYPE_SYNOLOGY_DSX11       2809
+#define MACH_TYPE_HANLIN_V3EXT         2810
+#define MACH_TYPE_HANLIN_V5            2811
+#define MACH_TYPE_HANLIN_V3PLUS        2812
+#define MACH_TYPE_IRIVER_STORY         2813
+#define MACH_TYPE_IREX_ILIAD           2814
+#define MACH_TYPE_IREX_DR1000          2815
+#define MACH_TYPE_TETON_BGA            2816
+#define MACH_TYPE_SNAPPER9G45          2817
+#define MACH_TYPE_TAM3517              2818
+#define MACH_TYPE_PDC100               2819
+#define MACH_TYPE_EUKREA_CPUIMX25SD    2820
+#define MACH_TYPE_EUKREA_CPUIMX35SD    2821
+#define MACH_TYPE_EUKREA_CPUIMX51SD    2822
+#define MACH_TYPE_EUKREA_CPUIMX51      2823
+#define MACH_TYPE_P565                 2824
+#define MACH_TYPE_ACER_A4              2825
+#define MACH_TYPE_DAVINCI_DM368_BIP    2826
+#define MACH_TYPE_ESHARE               2827
+#define MACH_TYPE_WLBARGN              2829
+#define MACH_TYPE_BM170                2830
+#define MACH_TYPE_NETSPACE_MINI_V2     2831
+#define MACH_TYPE_NETSPACE_PLUG_V2     2832
+#define MACH_TYPE_SIEMENS_L1           2833
+#define MACH_TYPE_ELV_LCU1             2834
+#define MACH_TYPE_MCU1                 2835
+#define MACH_TYPE_OMAP3_TAO3530        2836
+#define MACH_TYPE_OMAP3_PCUTOUCH       2837
+#define MACH_TYPE_SMDKC210             2838
+#define MACH_TYPE_OMAP3_BRAILLO        2839
+#define MACH_TYPE_SPYPLUG              2840
+#define MACH_TYPE_GINGER               2841
+#define MACH_TYPE_TNY_T3530            2842
+#define MACH_TYPE_PCAAL1               2843
+#define MACH_TYPE_SPADE                2844
+#define MACH_TYPE_MXC25_TOPAZ          2845
+#define MACH_TYPE_T5325                2846
+#define MACH_TYPE_GW2361               2847
+#define MACH_TYPE_ELOG                 2848
+#define MACH_TYPE_INCOME               2849
+#define MACH_TYPE_BCM589X              2850
+#define MACH_TYPE_ETNA                 2851
+#define MACH_TYPE_HAWKS                2852
+#define MACH_TYPE_MESON                2853
+#define MACH_TYPE_XSBASE255            2854
+#define MACH_TYPE_PVM2030              2855
+#define MACH_TYPE_MIOA502              2856
+#define MACH_TYPE_VVBOX_SDORIG2        2857
+#define MACH_TYPE_VVBOX_SDLITE2        2858
+#define MACH_TYPE_VVBOX_SDPRO4         2859
+#define MACH_TYPE_HTC_SPV_M700         2860
+#define MACH_TYPE_MX257SX              2861
+#define MACH_TYPE_GONI                 2862
+#define MACH_TYPE_MSM8X55_SVLTE_FFA    2863
+#define MACH_TYPE_MSM8X55_SVLTE_SURF   2864
+#define MACH_TYPE_QUICKSTEP            2865
+#define MACH_TYPE_DMW96                2866
+#define MACH_TYPE_HAMMERHEAD           2867
+#define MACH_TYPE_TRIDENT              2868
+#define MACH_TYPE_LIGHTNING            2869
+#define MACH_TYPE_ICONNECT             2870
+#define MACH_TYPE_AUTOBOT              2871
+#define MACH_TYPE_COCONUT              2872
+#define MACH_TYPE_DURIAN               2873
+#define MACH_TYPE_CAYENNE              2874
+#define MACH_TYPE_FUJI                 2875
+#define MACH_TYPE_SYNOLOGY_6282        2876
+#define MACH_TYPE_EM1SY                2877
+#define MACH_TYPE_M502                 2878
+#define MACH_TYPE_MATRIX518            2879
+#define MACH_TYPE_TINY_GURNARD         2880
+#define MACH_TYPE_SPEAR1310            2881
+#define MACH_TYPE_BV07                 2882
+#define MACH_TYPE_MXT_TD61             2883
+#define MACH_TYPE_OPENRD_ULTIMATE      2884
+#define MACH_TYPE_DEVIXP               2885
+#define MACH_TYPE_MICCPT               2886
+#define MACH_TYPE_MIC256               2887
+#define MACH_TYPE_AS1167               2888
+#define MACH_TYPE_OMAP3_IBIZA          2889
+#define MACH_TYPE_U5500                2890
+#define MACH_TYPE_DAVINCI_PICTO        2891
+#define MACH_TYPE_MECHA                2892
+#define MACH_TYPE_BUBBA3               2893
+#define MACH_TYPE_PUPITRE              2894
+#define MACH_TYPE_TEGRA_VOGUE          2896
+#define MACH_TYPE_TEGRA_E1165          2897
+#define MACH_TYPE_SIMPLENET            2898
+#define MACH_TYPE_EC4350TBM            2899
+#define MACH_TYPE_PEC_TC               2900
+#define MACH_TYPE_PEC_HC2              2901
+#define MACH_TYPE_ESL_MOBILIS_A        2902
+#define MACH_TYPE_ESL_MOBILIS_B        2903
+#define MACH_TYPE_ESL_WAVE_A           2904
+#define MACH_TYPE_ESL_WAVE_B           2905
+#define MACH_TYPE_UNISENSE_MMM         2906
+#define MACH_TYPE_BLUESHARK            2907
+#define MACH_TYPE_E10                  2908
+#define MACH_TYPE_APP3K_ROBIN          2909
+#define MACH_TYPE_POV15HD              2910
+#define MACH_TYPE_STELLA               2911
+#define MACH_TYPE_LINKSTATION_LSCHL    2913
+#define MACH_TYPE_NETWALKER            2914
+#define MACH_TYPE_ACSX106              2915
+#define MACH_TYPE_ATLAS5_C1            2916
+#define MACH_TYPE_NSB3AST              2917
+#define MACH_TYPE_GNET_SLC             2918
+#define MACH_TYPE_AF4000               2919
+#define MACH_TYPE_ARK9431              2920
+#define MACH_TYPE_FS_S5PC100           2921
+#define MACH_TYPE_OMAP3505NOVA8        2922
+#define MACH_TYPE_OMAP3621_EDP1        2923
+#define MACH_TYPE_ORATISAES            2924
+#define MACH_TYPE_SMDKV310             2925
+#define MACH_TYPE_SIEMENS_L0           2926
+#define MACH_TYPE_VENTANA              2927
+#define MACH_TYPE_WM8505_7IN_NETBOOK   2928
+#define MACH_TYPE_EC4350SDB            2929
+#define MACH_TYPE_MIMAS                2930
+#define MACH_TYPE_TITAN                2931
+#define MACH_TYPE_CRANEBOARD           2932
+#define MACH_TYPE_ES2440               2933
+#define MACH_TYPE_NAJAY_A9263          2934
+#define MACH_TYPE_HTCTORNADO           2935
+#define MACH_TYPE_DIMM_MX257           2936
+#define MACH_TYPE_JIGEN                2937
+#define MACH_TYPE_SMDK6450             2938
+#define MACH_TYPE_MENO_QNG             2939
+#define MACH_TYPE_NS2416               2940
+#define MACH_TYPE_RPC353               2941
+#define MACH_TYPE_TQ6410               2942
+#define MACH_TYPE_SKY6410              2943
+#define MACH_TYPE_DYNASTY              2944
+#define MACH_TYPE_VIVO                 2945
+#define MACH_TYPE_BURY_BL7582          2946
+#define MACH_TYPE_BURY_BPS5270         2947
+#define MACH_TYPE_BASI                 2948
+#define MACH_TYPE_TN200                2949
+#define MACH_TYPE_C2MMI                2950
+#define MACH_TYPE_MESON_6236M          2951
+#define MACH_TYPE_MESON_8626M          2952
+#define MACH_TYPE_TUBE                 2953
+#define MACH_TYPE_MESSINA              2954
+#define MACH_TYPE_MX50_ARM2            2955
+#define MACH_TYPE_CETUS9263            2956
+#define MACH_TYPE_BROWNSTONE           2957
+#define MACH_TYPE_VMX25                2958
+#define MACH_TYPE_VMX51                2959
+#define MACH_TYPE_ABACUS               2960
+#define MACH_TYPE_CM4745               2961
+#define MACH_TYPE_ORATISLINK           2962
+#define MACH_TYPE_DAVINCI_DM365_DVR    2963
+#define MACH_TYPE_NETVIZ               2964
+#define MACH_TYPE_FLEXIBITY            2965
+#define MACH_TYPE_WLAN_COMPUTER        2966
+#define MACH_TYPE_LPC24XX              2967
+#define MACH_TYPE_SPICA                2968
+#define MACH_TYPE_GPSDISPLAY           2969
+#define MACH_TYPE_BIPNET               2970
+#define MACH_TYPE_OVERO_CTU_INERTIAL   2971
+#define MACH_TYPE_DAVINCI_DM355_MMM    2972
+#define MACH_TYPE_PC9260_V2            2973
+#define MACH_TYPE_PTX7545              2974
+#define MACH_TYPE_TM_EFDC              2975
+#define MACH_TYPE_OMAP3_WALDO1         2977
+#define MACH_TYPE_FLYER                2978
+#define MACH_TYPE_TORNADO3240          2979
+#define MACH_TYPE_SOLI_01              2980
+#define MACH_TYPE_OMAPL138_EUROPALC    2981
+#define MACH_TYPE_HELIOS_V1            2982
+#define MACH_TYPE_NETSPACE_LITE_V2     2983
+#define MACH_TYPE_SSC                  2984
+#define MACH_TYPE_PREMIERWAVE_EN       2985
+#define MACH_TYPE_WASABI               2986
+#define MACH_TYPE_MX50_RDP             2988
+#define MACH_TYPE_UNIVERSAL_C210       2989
+#define MACH_TYPE_REAL6410             2990
+#define MACH_TYPE_SPX_SAKURA           2991
+#define MACH_TYPE_IJ3K_2440            2992
+#define MACH_TYPE_OMAP3_BC10           2993
+#define MACH_TYPE_THEBE                2994
+#define MACH_TYPE_RV082                2995
+#define MACH_TYPE_ARMLGUEST            2996
+#define MACH_TYPE_TJINC1000            2997
+#define MACH_TYPE_DOCKSTAR             2998
+#define MACH_TYPE_AX8008               2999
+#define MACH_TYPE_GNET_SGCE            3000
+#define MACH_TYPE_PXWNAS_500_1000      3001
+#define MACH_TYPE_AWM2                 3003
+#define MACH_TYPE_TI8148EVM            3004
+#define MACH_TYPE_SEABOARD             3005
+#define MACH_TYPE_LINKSTATION_CHLV2    3006
+#define MACH_TYPE_TERA_PRO2_RACK       3007
+#define MACH_TYPE_RUBYS                3008
+#define MACH_TYPE_AQUARIUS             3009
+#define MACH_TYPE_MX53_ARD             3010
+#define MACH_TYPE_MX53_SMD             3011
+#define MACH_TYPE_LSWXL                3012
+#define MACH_TYPE_DOVE_AVNG_V3         3013
+#define MACH_TYPE_SDI_ESS_9263         3014
+#define MACH_TYPE_JOCPU550             3015
+#define MACH_TYPE_MSM8X60_RUMI3        3016
+#define MACH_TYPE_MSM8X60_FFA          3017
+#define MACH_TYPE_YANOMAMI             3018
+#define MACH_TYPE_GTA04                3019
+#define MACH_TYPE_CM_A510              3020
+#define MACH_TYPE_OMAP3_RFS200         3021
+#define MACH_TYPE_KX33XX               3022
+#define MACH_TYPE_PTX7510              3023
+#define MACH_TYPE_TOP9000              3024
+#define MACH_TYPE_TEENOTE              3025
+#define MACH_TYPE_TS3                  3026
+#define MACH_TYPE_A0                   3027
+#define MACH_TYPE_FSM9XXX_SURF         3028
+#define MACH_TYPE_FSM9XXX_FFA          3029
+#define MACH_TYPE_FRRHWCDMA60W         3030
+#define MACH_TYPE_REMUS                3031
+#define MACH_TYPE_AT91CAP7XDK          3032
+#define MACH_TYPE_AT91CAP7STK          3033
+#define MACH_TYPE_KT_SBC_SAM9_1        3034
+#define MACH_TYPE_ARMADA_XP_DB         3036
+#define MACH_TYPE_SPDM                 3037
+#define MACH_TYPE_GTIB                 3038
+#define MACH_TYPE_DGM3240              3039
+#define MACH_TYPE_ATLAS_I_LPE          3040
+#define MACH_TYPE_HTCMEGA              3041
+#define MACH_TYPE_TRICORDER            3042
+#define MACH_TYPE_TX28                 3043
+#define MACH_TYPE_BSTBRD               3044
+#define MACH_TYPE_PWB3090              3045
+#define MACH_TYPE_IDEA6410             3046
+#define MACH_TYPE_QBC9263              3047
+#define MACH_TYPE_BORABORA             3048
+#define MACH_TYPE_VALDEZ               3049
+#define MACH_TYPE_LS9G20               3050
+#define MACH_TYPE_MIOS_V1              3051
+#define MACH_TYPE_S5PC110_CRESPO       3052
+#define MACH_TYPE_CONTROLTEK9G20       3053
+#define MACH_TYPE_TIN307               3054
+#define MACH_TYPE_TIN510               3055
+#define MACH_TYPE_EP3517               3056
+#define MACH_TYPE_BLUECHEESE           3057
+#define MACH_TYPE_TEM3X30              3058
+#define MACH_TYPE_HARVEST_DESOTO       3059
+#define MACH_TYPE_MSM8X60_QRDC         3060
+#define MACH_TYPE_SPEAR900             3061
+#define MACH_TYPE_PCONTROL_G20         3062
+#define MACH_TYPE_RDSTOR               3063
+#define MACH_TYPE_USDLOADER            3064
+#define MACH_TYPE_TSOPLOADER           3065
+#define MACH_TYPE_KRONOS               3066
+#define MACH_TYPE_FFCORE               3067
+#define MACH_TYPE_MONE                 3068
+#define MACH_TYPE_UNIT2S               3069
+#define MACH_TYPE_ACER_A5              3070
+#define MACH_TYPE_ETHERPRO_ISP         3071
+#define MACH_TYPE_STRETCHS7000         3072
+#define MACH_TYPE_P87_SMARTSIM         3073
+#define MACH_TYPE_TULIP                3074
+#define MACH_TYPE_SUNFLOWER            3075
+#define MACH_TYPE_RIB                  3076
+#define MACH_TYPE_CLOD                 3077
+#define MACH_TYPE_RUMP                 3078
+#define MACH_TYPE_TENDERLOIN           3079
+#define MACH_TYPE_SHORTLOIN            3080
+#define MACH_TYPE_ANTARES              3082
+#define MACH_TYPE_WB40N                3083
+#define MACH_TYPE_HERRING              3084
+#define MACH_TYPE_NAXY400              3085
+#define MACH_TYPE_NAXY1200             3086
+#define MACH_TYPE_VPR200               3087
+#define MACH_TYPE_BUG20                3088
+#define MACH_TYPE_GOFLEXNET            3089
+#define MACH_TYPE_TORBRECK             3090
+#define MACH_TYPE_SAARB_MG1            3091
+#define MACH_TYPE_CALLISTO             3092
+#define MACH_TYPE_MULTHSU              3093
+#define MACH_TYPE_SALUDA               3094
+#define MACH_TYPE_PEMP_OMAP3_APOLLO    3095
+#define MACH_TYPE_VC0718               3096
+#define MACH_TYPE_MVBLX                3097
+#define MACH_TYPE_INHAND_APEIRON       3098
+#define MACH_TYPE_INHAND_FURY          3099
+#define MACH_TYPE_INHAND_SIREN         3100
+#define MACH_TYPE_HDNVP                3101
+#define MACH_TYPE_SOFTWINNER           3102
+#define MACH_TYPE_PRIMA2_EVB           3103
+#define MACH_TYPE_NAS6210              3104
+#define MACH_TYPE_UNISDEV              3105
+#define MACH_TYPE_SBCA11               3106
+#define MACH_TYPE_SAGA                 3107
+#define MACH_TYPE_NS_K330              3108
+#define MACH_TYPE_TANNA                3109
+#define MACH_TYPE_IMATE8502            3110
+#define MACH_TYPE_ASPEN                3111
+#define MACH_TYPE_DAINTREE_CWAC        3112
+#define MACH_TYPE_ZMX25                3113
+#define MACH_TYPE_MAPLE1               3114
+#define MACH_TYPE_QSD8X72_SURF         3115
+#define MACH_TYPE_QSD8X72_FFA          3116
+#define MACH_TYPE_ABILENE              3117
+#define MACH_TYPE_EIGEN_TTR            3118
+#define MACH_TYPE_IOMEGA_IX2_200       3119
+#define MACH_TYPE_CORETEC_VCX7400      3120
+#define MACH_TYPE_SANTIAGO             3121
+#define MACH_TYPE_MX257SOL             3122
+#define MACH_TYPE_STRASBOURG           3123
+#define MACH_TYPE_MSM8X60_FLUID        3124
+#define MACH_TYPE_SMARTQV5             3125
+#define MACH_TYPE_SMARTQV3             3126
+#define MACH_TYPE_SMARTQV7             3127
+#define MACH_TYPE_PAZ00                3128
+#define MACH_TYPE_ACMENETUSFOXG20      3129
+#define MACH_TYPE_FWBD_0404            3131
+#define MACH_TYPE_HDGU                 3132
+#define MACH_TYPE_PYRAMID              3133
+#define MACH_TYPE_EPIPHAN              3134
+#define MACH_TYPE_OMAP_BENDER          3135
+#define MACH_TYPE_GURNARD              3136
+#define MACH_TYPE_GTL_IT5100           3137
+#define MACH_TYPE_BCM2708              3138
+#define MACH_TYPE_MX51_GGC             3139
+#define MACH_TYPE_SHARESPACE           3140
+#define MACH_TYPE_HABA_KNX_EXPLORER    3141
+#define MACH_TYPE_SIMTEC_KIRKMOD       3142
+#define MACH_TYPE_CRUX                 3143
+#define MACH_TYPE_MX51_BRAVO           3144
+#define MACH_TYPE_CHARON               3145
+#define MACH_TYPE_PICOCOM3             3146
+#define MACH_TYPE_PICOCOM4             3147
+#define MACH_TYPE_SERRANO              3148
+#define MACH_TYPE_DOUBLESHOT           3149
+#define MACH_TYPE_EVSY                 3150
+#define MACH_TYPE_HUASHAN              3151
+#define MACH_TYPE_LAUSANNE             3152
+#define MACH_TYPE_EMERALD              3153
+#define MACH_TYPE_TQMA35               3154
+#define MACH_TYPE_MARVEL               3155
+#define MACH_TYPE_MANUAE               3156
+#define MACH_TYPE_CHACHA               3157
+#define MACH_TYPE_LEMON                3158
+#define MACH_TYPE_CSC                  3159
+#define MACH_TYPE_GIRA_KNXIP_ROUTER    3160
+#define MACH_TYPE_T20                  3161
+#define MACH_TYPE_HDMINI               3162
+#define MACH_TYPE_SCIPHONE_G2          3163
+#define MACH_TYPE_EXPRESS              3164
+#define MACH_TYPE_EXPRESS_KT           3165
+#define MACH_TYPE_MAXIMASP             3166
+#define MACH_TYPE_NITROGEN_IMX51       3167
+#define MACH_TYPE_NITROGEN_IMX53       3168
+#define MACH_TYPE_SUNFIRE              3169
+#define MACH_TYPE_AROWANA              3170
+#define MACH_TYPE_TEGRA_DAYTONA        3171
+#define MACH_TYPE_TEGRA_SWORDFISH      3172
+#define MACH_TYPE_EDISON               3173
+#define MACH_TYPE_SVP8500V1            3174
+#define MACH_TYPE_SVP8500V2            3175
+#define MACH_TYPE_SVP5500              3176
+#define MACH_TYPE_B5500                3177
+#define MACH_TYPE_S5500                3178
+#define MACH_TYPE_ICON                 3179
+#define MACH_TYPE_ELEPHANT             3180
+#define MACH_TYPE_SHOOTER              3182
+#define MACH_TYPE_SPADE_LTE            3183
+#define MACH_TYPE_PHILHWANI            3184
+#define MACH_TYPE_GSNCOMM              3185
+#define MACH_TYPE_STRASBOURG_A2        3186
+#define MACH_TYPE_MMM                  3187
+#define MACH_TYPE_DAVINCI_DM365_BV     3188
+#define MACH_TYPE_AG5EVM               3189
+#define MACH_TYPE_SC575PLC             3190
+#define MACH_TYPE_SC575IPC             3191
+#define MACH_TYPE_OMAP3_TDM3730        3192
+#define MACH_TYPE_TOP9000_EVAL         3194
+#define MACH_TYPE_TOP9000_SU           3195
+#define MACH_TYPE_UTM300               3196
+#define MACH_TYPE_TSUNAGI              3197
+#define MACH_TYPE_TS75XX               3198
+#define MACH_TYPE_TS47XX               3200
+#define MACH_TYPE_DA850_K5             3201
+#define MACH_TYPE_AX502                3202
+#define MACH_TYPE_IGEP0032             3203
+#define MACH_TYPE_ANTERO               3204
+#define MACH_TYPE_SYNERGY              3205
+#define MACH_TYPE_ICS_IF_VOIP          3206
+#define MACH_TYPE_WLF_CRAGG_6410       3207
+#define MACH_TYPE_PUNICA               3208
+#define MACH_TYPE_TRIMSLICE            3209
+#define MACH_TYPE_MX27_WMULTRA         3210
+#define MACH_TYPE_MACKEREL             3211
+#define MACH_TYPE_FA9X27               3213
+#define MACH_TYPE_NS2816TB             3214
+#define MACH_TYPE_NS2816_NTPAD         3215
+#define MACH_TYPE_NS2816_NTNB          3216
+#define MACH_TYPE_KAEN                 3217
+#define MACH_TYPE_NV1000               3218
+#define MACH_TYPE_NUC950TS             3219
+#define MACH_TYPE_NOKIA_RM680          3220
+#define MACH_TYPE_AST2200              3221
+#define MACH_TYPE_LEAD                 3222
+#define MACH_TYPE_UNINO1               3223
+#define MACH_TYPE_GREECO               3224
+#define MACH_TYPE_VERDI                3225
+#define MACH_TYPE_DM6446_ADBOX         3226
+#define MACH_TYPE_QUAD_SALSA           3227
+#define MACH_TYPE_ABB_GMA_1_1          3228
+#define MACH_TYPE_SVCID                3229
+#define MACH_TYPE_MSM8960_SIM          3230
+#define MACH_TYPE_MSM8960_RUMI3        3231
+#define MACH_TYPE_ICON_G               3232
+#define MACH_TYPE_MB3                  3233
+#define MACH_TYPE_GSIA18S              3234
+#define MACH_TYPE_PIVICC               3235
+#define MACH_TYPE_PCM048               3236
+#define MACH_TYPE_DDS                  3237
+#define MACH_TYPE_CHALTEN_XA1          3238
+#define MACH_TYPE_TS48XX               3239
+#define MACH_TYPE_TONGA2_TFTTIMER      3240
+#define MACH_TYPE_WHISTLER             3241
+#define MACH_TYPE_ASL_PHOENIX          3242
+#define MACH_TYPE_AT91SAM9263OTLITE    3243
+#define MACH_TYPE_DDPLUG               3244
+#define MACH_TYPE_D2PLUG               3245
+#define MACH_TYPE_KZM9D                3246
+#define MACH_TYPE_VERDI_LTE            3247
+#define MACH_TYPE_NANOZOOM             3248
+#define MACH_TYPE_DM3730_SOM_LV        3249
+#define MACH_TYPE_DM3730_TORPEDO       3250
+#define MACH_TYPE_ANCHOVY              3251
+#define MACH_TYPE_RE2REV20             3253
+#define MACH_TYPE_RE2REV21             3254
+#define MACH_TYPE_CNS21XX              3255
+#define MACH_TYPE_RIDER                3257
+#define MACH_TYPE_NSK330               3258
+#define MACH_TYPE_CNS2133EVB           3259
+#define MACH_TYPE_Z3_816X_MOD          3260
+#define MACH_TYPE_Z3_814X_MOD          3261
+#define MACH_TYPE_BEECT                3262
+#define MACH_TYPE_DMA_THUNDERBUG       3263
+#define MACH_TYPE_OMN_AT91SAM9G20      3264
+#define MACH_TYPE_MX25_E2S_UC          3265
+#define MACH_TYPE_MIONE                3266
+#define MACH_TYPE_TOP9000_TCU          3267
+#define MACH_TYPE_TOP9000_BSL          3268
+#define MACH_TYPE_KINGDOM              3269
+#define MACH_TYPE_ARMADILLO460         3270
+#define MACH_TYPE_LQ2                  3271
+#define MACH_TYPE_SWEDA_TMS2           3272
+#define MACH_TYPE_MX53_LOCO            3273
+#define MACH_TYPE_ACER_A8              3275
+#define MACH_TYPE_ACER_GAUGUIN         3276
+#define MACH_TYPE_GUPPY                3277
+#define MACH_TYPE_MX61_ARD             3278
+#define MACH_TYPE_TX53                 3279
+#define MACH_TYPE_OMAPL138_CASE_A3     3280
+#define MACH_TYPE_UEMD                 3281
+#define MACH_TYPE_CCWMX51MUT           3282
+#define MACH_TYPE_ROCKHOPPER           3283
+#define MACH_TYPE_ENCORE               3284
+#define MACH_TYPE_HKDKC100             3285
+#define MACH_TYPE_TS42XX               3286
+#define MACH_TYPE_AEBL                 3287
+#define MACH_TYPE_WARIO                3288
+#define MACH_TYPE_GFS_SPM              3289
+#define MACH_TYPE_CM_T3730             3290
+#define MACH_TYPE_ISC3                 3291
+#define MACH_TYPE_RASCAL               3292
+#define MACH_TYPE_HREFV60              3293
+#define MACH_TYPE_TPT_2_0              3294
+#define MACH_TYPE_PYRAMID_TD           3295
+#define MACH_TYPE_SPLENDOR             3296
+#define MACH_TYPE_GUF_PLANET           3297
+#define MACH_TYPE_MSM8X60_QT           3298
+#define MACH_TYPE_HTC_HD_MINI          3299
+#define MACH_TYPE_ATHENE               3300
+#define MACH_TYPE_DEEP_R_EK_1          3301
+#define MACH_TYPE_VIVOW_CT             3302
+#define MACH_TYPE_NERY_1000            3303
+#define MACH_TYPE_RFL109145_SSRV       3304
+#define MACH_TYPE_NMH                  3305
+#define MACH_TYPE_WN802T               3306
+#define MACH_TYPE_DRAGONET             3307
+#define MACH_TYPE_GENEVA_B             3308
+#define MACH_TYPE_AT91SAM9263DESK16L   3309
+#define MACH_TYPE_BCMHANA_SV           3310
+#define MACH_TYPE_BCMHANA_TABLET       3311
+#define MACH_TYPE_KOI                  3312
+#define MACH_TYPE_TS4800               3313
+#define MACH_TYPE_TQMA9263             3314
+#define MACH_TYPE_HOLIDAY              3315
+#define MACH_TYPE_DMA6410              3316
+#define MACH_TYPE_PCATS_OVERLAY        3317
+#define MACH_TYPE_HWGW6410             3318
+#define MACH_TYPE_SHENZHOU             3319
+#define MACH_TYPE_CWME9210             3320
+#define MACH_TYPE_CWME9210JS           3321
+#define MACH_TYPE_PGS_SITARA           3322
+#define MACH_TYPE_COLIBRI_TEGRA2       3323
+#define MACH_TYPE_W21                  3324
+#define MACH_TYPE_POLYSAT1             3325
+#define MACH_TYPE_DATAWAY              3326
+#define MACH_TYPE_COBRAL138            3327
+#define MACH_TYPE_ROVERPCS8            3328
+#define MACH_TYPE_MARVELC              3329
+#define MACH_TYPE_NAVEFIHID            3330
+#define MACH_TYPE_DM365_CV100          3331
+#define MACH_TYPE_ABLE                 3332
+#define MACH_TYPE_LEGACY               3333
+#define MACH_TYPE_ICONG                3334
+#define MACH_TYPE_ROVER_G8             3335
+#define MACH_TYPE_T5388P               3336
+#define MACH_TYPE_DINGO                3337
+#define MACH_TYPE_GOFLEXHOME           3338
+#define MACH_TYPE_LANREADYFN511        3340
+#define MACH_TYPE_OMAP3_BAIA           3341
+#define MACH_TYPE_OMAP3SMARTDISPLAY    3342
+#define MACH_TYPE_XILINX               3343
+#define MACH_TYPE_A2F                  3344
+#define MACH_TYPE_SKY25                3345
+#define MACH_TYPE_CCMX53               3346
+#define MACH_TYPE_CCMX53JS             3347
+#define MACH_TYPE_CCWMX53              3348
+#define MACH_TYPE_CCWMX53JS            3349
+#define MACH_TYPE_FRISMS               3350
+#define MACH_TYPE_MSM7X27A_FFA         3351
+#define MACH_TYPE_MSM7X27A_SURF        3352
+#define MACH_TYPE_MSM7X27A_RUMI3       3353
+#define MACH_TYPE_DIMMSAM9G20          3354
+#define MACH_TYPE_DIMM_IMX28           3355
+#define MACH_TYPE_AMK_A4               3356
+#define MACH_TYPE_GNET_SGME            3357
+#define MACH_TYPE_SHOOTER_U            3358
+#define MACH_TYPE_VMX53                3359
+#define MACH_TYPE_RHINO                3360
+#define MACH_TYPE_ARMLEX4210           3361
+#define MACH_TYPE_SWARCOEXTMODEM       3362
+#define MACH_TYPE_SNOWBALL             3363
+#define MACH_TYPE_PCM049               3364
+#define MACH_TYPE_VIGOR                3365
+#define MACH_TYPE_OSLO_AMUNDSEN        3366
+#define MACH_TYPE_GSL_DIAMOND          3367
+#define MACH_TYPE_CV2201               3368
+#define MACH_TYPE_CV2202               3369
+#define MACH_TYPE_CV2203               3370
+#define MACH_TYPE_VIT_IBOX             3371
+#define MACH_TYPE_DM6441_ESP           3372
+#define MACH_TYPE_AT91SAM9X5EK         3373
+#define MACH_TYPE_LIBRA                3374
+#define MACH_TYPE_EASYCRRH             3375
+#define MACH_TYPE_TRIPEL               3376
+#define MACH_TYPE_ENDIAN_MINI          3377
+#define MACH_TYPE_XILINX_EP107         3378
+#define MACH_TYPE_NURI                 3379
+#define MACH_TYPE_JANUS                3380
+#define MACH_TYPE_DDNAS                3381
+#define MACH_TYPE_TAG                  3382
+#define MACH_TYPE_TAGW                 3383
+#define MACH_TYPE_NITROGEN_VM_IMX51    3384
+#define MACH_TYPE_VIPRINET             3385
+#define MACH_TYPE_BOCKW                3386
+#define MACH_TYPE_EVA2000              3387
+#define MACH_TYPE_STEELYARD            3388
+#define MACH_TYPE_LPC2468OEM           3389
+#define MACH_TYPE_MACH_SDH001          3390
+#define MACH_TYPE_LPC2478MICROBLOX     3391
+#define MACH_TYPE_NSSLSBOARD           3392
+#define MACH_TYPE_GENEVA_B5            3393
+#define MACH_TYPE_SPEAR1340            3394
+#define MACH_TYPE_REXMAS               3395
+#define MACH_TYPE_MSM8960_CDP          3396
+#define MACH_TYPE_MSM8960_MDP          3397
+#define MACH_TYPE_MSM8960_FLUID        3398
+#define MACH_TYPE_MSM8960_APQ          3399
+#define MACH_TYPE_HELIOS_V2            3400
+#define MACH_TYPE_MIF10P               3401
+#define MACH_TYPE_IAM28                3402
+#define MACH_TYPE_PICASSO              3403
+#define MACH_TYPE_MR301A               3404
+#define MACH_TYPE_NOTLE                3405
+#define MACH_TYPE_EELX2                3406
+#define MACH_TYPE_MOON                 3407
+#define MACH_TYPE_RUBY                 3408
+#define MACH_TYPE_GOLDENGATE           3409
+#define MACH_TYPE_CTBU_GEN2            3410
+#define MACH_TYPE_KMP_AM17_01          3411
+#define MACH_TYPE_WTPLUG               3412
+#define MACH_TYPE_MX27SU2              3413
+#define MACH_TYPE_NB31                 3414
+#define MACH_TYPE_HJSDU                3415
+#define MACH_TYPE_TD3_REV1             3416
+#define MACH_TYPE_EAG_CI4000           3417
+#define MACH_TYPE_NET5BIG_NAND_V2      3418
+#define MACH_TYPE_CPX2                 3419
+#define MACH_TYPE_NET2BIG_NAND_V2      3420
+#define MACH_TYPE_ECUV5                3421
+#define MACH_TYPE_HSGX6D               3422
+#define MACH_TYPE_DAWAD7               3423
+#define MACH_TYPE_SAM9REPEATER         3424
+#define MACH_TYPE_GT_I5700             3425
+#define MACH_TYPE_CTERA_PLUG_C2        3426
+#define MACH_TYPE_MARVELCT             3427
+#define MACH_TYPE_AG11005              3428
+#define MACH_TYPE_OMAP_BLAZE           3429
+#define MACH_TYPE_VANGOGH              3430
+#define MACH_TYPE_MATRIX505            3431
+#define MACH_TYPE_OCE_NIGMA            3432
+#define MACH_TYPE_T55                  3433
+#define MACH_TYPE_BIO3K                3434
+#define MACH_TYPE_EXPRESSCT            3435
+#define MACH_TYPE_CARDHU               3436
+#define MACH_TYPE_ARUBA                3437
+#define MACH_TYPE_BONAIRE              3438
+#define MACH_TYPE_NUC700EVB            3439
+#define MACH_TYPE_NUC710EVB            3440
+#define MACH_TYPE_NUC740EVB            3441
+#define MACH_TYPE_NUC745EVB            3442
+#define MACH_TYPE_TRANSCEDE            3443
+#define MACH_TYPE_MORA                 3444
+#define MACH_TYPE_NDA_EVM              3445
+#define MACH_TYPE_TIMU                 3446
+#define MACH_TYPE_EXPRESSH             3447
+#define MACH_TYPE_VERIDIS_A300         3448
+#define MACH_TYPE_DM368_LEOPARD        3449
+#define MACH_TYPE_OMAP_MCOP            3450
+#define MACH_TYPE_TRITIP               3451
+#define MACH_TYPE_SM1K                 3452
+#define MACH_TYPE_MONCH                3453
+#define MACH_TYPE_CURACAO              3454
+#define MACH_TYPE_ORIGEN               3455
+#define MACH_TYPE_EPC10                3456
+#define MACH_TYPE_SGH_I740             3457
+#define MACH_TYPE_TUNA                 3458
+#define MACH_TYPE_MX51_TULIP           3459
+#define MACH_TYPE_MX51_ASTER7          3460
+#define MACH_TYPE_ACRO37XBRD           3461
+#define MACH_TYPE_ELKE                 3462
+#define MACH_TYPE_SBC6000X             3463
+#define MACH_TYPE_R1801E               3464
+#define MACH_TYPE_H1600                3465
+#define MACH_TYPE_MINI210              3466
+#define MACH_TYPE_MINI8168             3467
+#define MACH_TYPE_PC7308               3468
+#define MACH_TYPE_GE863                3469
+#define MACH_TYPE_KMM2M01              3470
+#define MACH_TYPE_MX51EREBUS           3471
+#define MACH_TYPE_WM8650REFBOARD       3472
+#define MACH_TYPE_TUXRAIL              3473
+#define MACH_TYPE_ARTHUR               3474
+#define MACH_TYPE_DOORBOY              3475
+#define MACH_TYPE_XARINA               3476
+#define MACH_TYPE_ROVERX7              3477
+#define MACH_TYPE_SDVR                 3478
+#define MACH_TYPE_ACER_MAYA            3479
+#define MACH_TYPE_PICO                 3480
+#define MACH_TYPE_CWMX233              3481
+#define MACH_TYPE_CWAM1808             3482
+#define MACH_TYPE_CWDM365              3483
+#define MACH_TYPE_MX51_MORAY           3484
+#define MACH_TYPE_THALES_CBC           3485
+#define MACH_TYPE_BLUEPOINT            3486
+#define MACH_TYPE_DIR665               3487
+#define MACH_TYPE_ACMEROVER1           3488
+#define MACH_TYPE_SHOOTER_CT           3489
+#define MACH_TYPE_BLISS                3490
+#define MACH_TYPE_BLISSC               3491
+#define MACH_TYPE_THALES_ADC           3492
+#define MACH_TYPE_UBISYS_P9D_EVP       3493
+#define MACH_TYPE_ATDGP318             3494
+#define MACH_TYPE_DMA210U              3495
+#define MACH_TYPE_EM_T3                3496
+#define MACH_TYPE_HTX3250              3497
+#define MACH_TYPE_G50                  3498
+#define MACH_TYPE_ECO5                 3499
+#define MACH_TYPE_WINTERGRASP          3500
+#define MACH_TYPE_PURO                 3501
+#define MACH_TYPE_SHOOTER_K            3502
+#define MACH_TYPE_NSPIRE               3503
+#define MACH_TYPE_MICKXX               3504
+#define MACH_TYPE_LXMB                 3505
+#define MACH_TYPE_TMDXSCBP6616X        3506
+#define MACH_TYPE_ADAM                 3507
+#define MACH_TYPE_B1004                3508
+#define MACH_TYPE_OBOEA                3509
+#define MACH_TYPE_A1015                3510
+#define MACH_TYPE_ROBIN_VBDT30         3511
+#define MACH_TYPE_TEGRA_ENTERPRISE     3512
+#define MACH_TYPE_RFL108200_MK10       3513
+#define MACH_TYPE_RFL108300_MK16       3514
+#define MACH_TYPE_ROVER_V7             3515
+#define MACH_TYPE_MIPHONE              3516
+#define MACH_TYPE_FEMTOBTS             3517
+#define MACH_TYPE_MONOPOLI             3518
+#define MACH_TYPE_BOSS                 3519
+#define MACH_TYPE_DAVINCI_DM368_VTAM   3520
+#define MACH_TYPE_CLCON                3521
+#define MACH_TYPE_NOKIA_RM696          3522
+#define MACH_TYPE_TAHITI               3523
+#define MACH_TYPE_FIGHTER              3524
+#define MACH_TYPE_SGH_I710             3525
+#define MACH_TYPE_INTEGREPROSCB        3526
+#define MACH_TYPE_MONZA                3527
+#define MACH_TYPE_MX6Q_SABREAUTO       3529
+#define MACH_TYPE_GMA01X               3530
+#define MACH_TYPE_SBC51                3531
+#define MACH_TYPE_FIT                  3532
+#define MACH_TYPE_STEELHEAD            3533
+#define MACH_TYPE_PANTHER              3534
+#define MACH_TYPE_MSM8960_LIQUID       3535
+#define MACH_TYPE_LEXIKONCT            3536
+#define MACH_TYPE_NS2816_STB           3537
+#define MACH_TYPE_SEI_MM2_LPC3250      3538
+#define MACH_TYPE_CMIMX53              3539
+#define MACH_TYPE_SANDWICH             3540
+#define MACH_TYPE_CHIEF                3541
+#define MACH_TYPE_POGO_E02             3542
+#define MACH_TYPE_MIKRAP_X168          3543
+#define MACH_TYPE_HTCMOZART            3544
+#define MACH_TYPE_HTCGOLD              3545
+#define MACH_TYPE_MT72XX               3546
+#define MACH_TYPE_MX51_IVY             3547
+#define MACH_TYPE_MX51_LVD             3548
+#define MACH_TYPE_OMAP3_WISER2         3549
+#define MACH_TYPE_DREAMPLUG            3550
+#define MACH_TYPE_COBAS_C_111          3551
+#define MACH_TYPE_COBAS_U_411          3552
+#define MACH_TYPE_HSSD                 3553
+#define MACH_TYPE_IOM35X               3554
+#define MACH_TYPE_PSOM_OMAP            3555
+#define MACH_TYPE_IPHONE_2G            3556
+#define MACH_TYPE_IPHONE_3G            3557
+#define MACH_TYPE_IPOD_TOUCH_1G        3558
+#define MACH_TYPE_PHAROS_TPC           3559
+#define MACH_TYPE_MX53_HYDRA           3560
+#define MACH_TYPE_NS2816_DEV_BOARD     3561
+#define MACH_TYPE_IPHONE_3GS           3562
+#define MACH_TYPE_IPHONE_4             3563
+#define MACH_TYPE_IPOD_TOUCH_4G        3564
+#define MACH_TYPE_DRAGON_E1100         3565
+#define MACH_TYPE_TOPSIDE              3566
+#define MACH_TYPE_IRISIII              3567
+#define MACH_TYPE_DETO_MACARM9         3568
+#define MACH_TYPE_ETI_D1               3569
+#define MACH_TYPE_SOM3530SDK           3570
+#define MACH_TYPE_OC_ENGINE            3571
+#define MACH_TYPE_APQ8064_SIM          3572
+#define MACH_TYPE_ALPS                 3575
+#define MACH_TYPE_TNY_T3730            3576
+#define MACH_TYPE_GERYON_NFE           3577
+#define MACH_TYPE_NS2816_REF_BOARD     3578
+#define MACH_TYPE_SILVERSTONE          3579
+#define MACH_TYPE_MTT2440              3580
+#define MACH_TYPE_YNICDB               3581
+#define MACH_TYPE_BCT                  3582
+#define MACH_TYPE_TUSCAN               3583
+#define MACH_TYPE_XBT_SAM9G45          3584
+#define MACH_TYPE_ENBW_CMC             3585
+#define MACH_TYPE_APQ8060_DRAGON       3586
+#define MACH_TYPE_CH104MX257           3587
+#define MACH_TYPE_OPENPRI              3588
+#define MACH_TYPE_AM335XEVM            3589
+#define MACH_TYPE_PICODMB              3590
+#define MACH_TYPE_WALUIGI              3591
+#define MACH_TYPE_PUNICAG7             3592
+#define MACH_TYPE_IPAD_1G              3593
+#define MACH_TYPE_APPLETV_2G           3594
+#define MACH_TYPE_MACH_ECOG45          3595
+#define MACH_TYPE_AIT_CAM_ENC_4XX      3596
+#define MACH_TYPE_RUNNYMEDE            3597
+#define MACH_TYPE_PLAY                 3598
+#define MACH_TYPE_HW90260              3599
+#define MACH_TYPE_TAGH                 3600
+#define MACH_TYPE_FILBERT              3601
+#define MACH_TYPE_GETINGE_NETCOMV3     3602
+#define MACH_TYPE_CW20                 3603
+#define MACH_TYPE_CINEMA               3604
+#define MACH_TYPE_CINEMA_TEA           3605
+#define MACH_TYPE_CINEMA_COFFEE        3606
+#define MACH_TYPE_CINEMA_JUICE         3607
+#define MACH_TYPE_THEPAD               3608
+#define MACH_TYPE_MX53_MIRAGE2         3609
+#define MACH_TYPE_MX53_EFIKASB         3610
+#define MACH_TYPE_STM_B2000            3612
+#define MACH_TYPE_M28EVK               3613
+#define MACH_TYPE_PDA                  3614
+#define MACH_TYPE_MERAKI_MR58          3615
+#define MACH_TYPE_KOTA2                3616
+#define MACH_TYPE_LETCOOL              3617
+#define MACH_TYPE_MX27IAT              3618
+#define MACH_TYPE_APOLLO_TD            3619
+#define MACH_TYPE_ARENA                3620
+#define MACH_TYPE_GSNGATEWAY           3621
+#define MACH_TYPE_LF2000               3622
+#define MACH_TYPE_BONITO               3623
+#define MACH_TYPE_ASYMPTOTE            3624
+#define MACH_TYPE_BST2BRD              3625
+#define MACH_TYPE_TX335S               3626
+#define MACH_TYPE_PELCO_TESLA          3627
+#define MACH_TYPE_RRHTESTPLAT          3628
+#define MACH_TYPE_VIDTONIC_PRO         3629
+#define MACH_TYPE_PL_APOLLO            3630
+#define MACH_TYPE_PL_PHOENIX           3631
+#define MACH_TYPE_M28CU3               3632
+#define MACH_TYPE_VVBOX_HD             3633
+#define MACH_TYPE_COREWARE_SAM9260_    3634
+#define MACH_TYPE_MARMADUKE            3635
+#define MACH_TYPE_AMG_XLCORE_CAMERA    3636
+#define MACH_TYPE_OMAP3_EGF            3637
+#define MACH_TYPE_SMDK4212             3638
+#define MACH_TYPE_DNP9200              3639
+#define MACH_TYPE_TF101                3640
+#define MACH_TYPE_OMAP3SILVIO          3641
+#define MACH_TYPE_PICASSO2             3642
+#define MACH_TYPE_VANGOGH2             3643
+#define MACH_TYPE_OLPC_XO_1_75         3644
+#define MACH_TYPE_GX400                3645
+#define MACH_TYPE_GS300                3646
+#define MACH_TYPE_ACER_A9              3647
+#define MACH_TYPE_VIVOW_EVM            3648
+#define MACH_TYPE_VELOCE_CXQ           3649
+#define MACH_TYPE_VELOCE_CXM           3650
+#define MACH_TYPE_P1852                3651
+#define MACH_TYPE_NAXY100              3652
+#define MACH_TYPE_TAISHAN              3653
+#define MACH_TYPE_TOUCHLINK            3654
+#define MACH_TYPE_STM32F103ZE          3655
+#define MACH_TYPE_STM_NMHDK_FLI7610    3657
+#define MACH_TYPE_TOP28X               3658
+#define MACH_TYPE_OKL4VP_MICROVISOR    3659
+#define MACH_TYPE_POP                  3660
+#define MACH_TYPE_LAYER                3661
+#define MACH_TYPE_TRONDHEIM            3662
+#define MACH_TYPE_EVA                  3663
+#define MACH_TYPE_TRUST_TAURUS         3664
+#define MACH_TYPE_NS2816_HUASHAN       3665
+#define MACH_TYPE_NS2816_YANGCHENG     3666
+#define MACH_TYPE_P852                 3667
+#define MACH_TYPE_FLEA3                3668
+#define MACH_TYPE_BOWFIN               3669
+#define MACH_TYPE_MV88DE3100           3670
+#define MACH_TYPE_PIA_AM35X            3671
+#define MACH_TYPE_CEDAR                3672
+#define MACH_TYPE_PICASSO_E            3673
+#define MACH_TYPE_SAMSUNG_E60          3674
+#define MACH_TYPE_MDM9615              3675
+#define MACH_TYPE_SDVR_MINI            3676
+#define MACH_TYPE_OMAP3_IJ3K           3677
+#define MACH_TYPE_MODASMC1             3678
+#define MACH_TYPE_APQ8064_RUMI3        3679
+#define MACH_TYPE_MATRIX506            3680
+#define MACH_TYPE_MSM9615_MTP          3681
+#define MACH_TYPE_DM36X_SPAWNDC        3682
+#define MACH_TYPE_SFF792               3683
+#define MACH_TYPE_AM335XIAEVM          3684
+#define MACH_TYPE_G3C2440              3685
+#define MACH_TYPE_TION270              3686
+#define MACH_TYPE_W22Q7ARM02           3687
+#define MACH_TYPE_OMAP_CAT             3688
+#define MACH_TYPE_AT91SAM9N12EK        3689
+#define MACH_TYPE_MORRISON             3690
+#define MACH_TYPE_SVDU                 3691
+#define MACH_TYPE_LPP01                3692
+#define MACH_TYPE_UBC283               3693
+#define MACH_TYPE_ZEPPELIN             3694
+#define MACH_TYPE_MOTUS                3695
+#define MACH_TYPE_NEOMAINBOARD         3696
+#define MACH_TYPE_DEVKIT3250           3697
+#define MACH_TYPE_DEVKIT7000           3698
+#define MACH_TYPE_FMC_UIC              3699
+#define MACH_TYPE_FMC_DCM              3700
+#define MACH_TYPE_BATWM                3701
+#define MACH_TYPE_ATLAS6CB             3702
+#define MACH_TYPE_QUATTROF             3703
+#define MACH_TYPE_QUATTROU             3704
+#define MACH_TYPE_BLUE                 3705
+#define MACH_TYPE_COLORADO             3706
+#define MACH_TYPE_POPC                 3707
+#define MACH_TYPE_PROMWAD_JADE         3708
+#define MACH_TYPE_AMP                  3709
+#define MACH_TYPE_GNET_AMP             3710
+#define MACH_TYPE_TOQUES               3711
+#define MACH_TYPE_APX4DEVKIT           3712
+#define MACH_TYPE_DCT_STORM            3713
+#define MACH_TYPE_Z3                   3714
+#define MACH_TYPE_OWL                  3715
+#define MACH_TYPE_COGENT_CSB1741       3716
+#define MACH_TYPE_OMAP3                3717
+#define MACH_TYPE_ADILLUSTRA610        3718
+#define MACH_TYPE_ECAFE_NA04           3719
+#define MACH_TYPE_POPCT                3720
+#define MACH_TYPE_OMAP3_HELENA         3721
+#define MACH_TYPE_ACH                  3722
+#define MACH_TYPE_MODULE_DTB           3723
+#define MACH_TYPE_RACKBOX              3724
+#define MACH_TYPE_OSLO_ELISABETH       3725
+#define MACH_TYPE_TT01                 3726
+#define MACH_TYPE_MSM8930_CDP          3727
+#define MACH_TYPE_MSM8930_MTP          3728
+#define MACH_TYPE_MSM8930_FLUID        3729
+#define MACH_TYPE_LTU11                3730
+#define MACH_TYPE_AM1808_SPAWNCO       3731
+#define MACH_TYPE_FLX6410              3732
+#define MACH_TYPE_MX6Q_QSB             3733
+#define MACH_TYPE_MX53_PLT424          3734
+#define MACH_TYPE_JASMINE              3735
+#define MACH_TYPE_L138_OWLBOARD_PLUS   3736
+#define MACH_TYPE_WR21                 3737
+#define MACH_TYPE_PEABOY               3739
+#define MACH_TYPE_MX28_PLATO           3740
+#define MACH_TYPE_KACOM2               3741
+#define MACH_TYPE_SLCO                 3742
+#define MACH_TYPE_IMX51PICO            3743
+#define MACH_TYPE_GLINK1               3744
+#define MACH_TYPE_DIAMOND              3745
+#define MACH_TYPE_D9000                3746
+#define MACH_TYPE_W5300E01             3747
+#define MACH_TYPE_IM6000               3748
+#define MACH_TYPE_MX51_FRED51          3749
+#define MACH_TYPE_STM32F2              3750
+#define MACH_TYPE_VILLE                3751
+#define MACH_TYPE_PTIP_MURNAU          3752
+#define MACH_TYPE_PTIP_CLASSIC         3753
+#define MACH_TYPE_MX53GRB              3754
+#define MACH_TYPE_GAGARIN              3755
+#define MACH_TYPE_MSM7X27A_QRD1        3756
+#define MACH_TYPE_NAS2BIG              3757
+#define MACH_TYPE_SUPERFEMTO           3758
+#define MACH_TYPE_TEUFEL               3759
+#define MACH_TYPE_DINARA               3760
+#define MACH_TYPE_VANQUISH             3761
+#define MACH_TYPE_ZIPABOX1             3762
+#define MACH_TYPE_U9540                3763
+#define MACH_TYPE_JET                  3764
+#define MACH_TYPE_SMDK4412             3765
+#define MACH_TYPE_ELITE                3766
+#define MACH_TYPE_SPEAR320_HMI         3767
+#define MACH_TYPE_ONTARIO              3768
+#define MACH_TYPE_MX6Q_SABRELITE       3769
+#define MACH_TYPE_VC200                3770
+#define MACH_TYPE_MSM7625A_FFA         3771
+#define MACH_TYPE_MSM7625A_SURF        3772
+#define MACH_TYPE_BENTHOSSBP           3773
+#define MACH_TYPE_SMDK5210             3774
+#define MACH_TYPE_EMPQ2300             3775
+#define MACH_TYPE_MINIPOS              3776
+#define MACH_TYPE_OMAP5_SEVM           3777
+#define MACH_TYPE_SHELTER              3778
+#define MACH_TYPE_OMAP3_DEVKIT8500     3779
+#define MACH_TYPE_EDGETD               3780
+#define MACH_TYPE_COPPERYARD           3781
+#define MACH_TYPE_EDGE                 3782
+#define MACH_TYPE_EDGE_U               3783
+#define MACH_TYPE_EDGE_TD              3784
+#define MACH_TYPE_WDSS                 3785
+#define MACH_TYPE_DL_PB25              3786
+#define MACH_TYPE_DSS11                3787
+#define MACH_TYPE_CPA                  3788
+#define MACH_TYPE_APTP2000             3789
+#define MACH_TYPE_MARZEN               3790
+#define MACH_TYPE_ST_TURBINE           3791
+#define MACH_TYPE_GTL_IT3300           3792
+#define MACH_TYPE_MX6_MULE             3793
+#define MACH_TYPE_V7PXA_DT             3794
+#define MACH_TYPE_V7MMP_DT             3795
+#define MACH_TYPE_DRAGON7              3796
+#define MACH_TYPE_KROME                3797
+#define MACH_TYPE_ORATISDANTE          3798
+#define MACH_TYPE_FATHOM               3799
+#define MACH_TYPE_DNS325               3800
+#define MACH_TYPE_SARNEN               3801
+#define MACH_TYPE_UBISYS_G1            3802
+#define MACH_TYPE_MX53_PF1             3803
+#define MACH_TYPE_ASANTI               3804
+#define MACH_TYPE_VOLTA                3805
+#define MACH_TYPE_S5P6450              3806
+#define MACH_TYPE_KNIGHT               3807
+#define MACH_TYPE_BEAGLEBONE           3808
+#define MACH_TYPE_BECKER               3809
+#define MACH_TYPE_FC360                3810
+#define MACH_TYPE_PMI2_XLS             3811
+#define MACH_TYPE_TARANTO              3812
+#define MACH_TYPE_PLUTUX               3813
+#define MACH_TYPE_IPMP_MEDCOM          3814
+#define MACH_TYPE_ABSOLUT              3815
+#define MACH_TYPE_AWPB3                3816
+#define MACH_TYPE_NFP32XX_DT           3817
+#define MACH_TYPE_DL_PB53              3818
+#define MACH_TYPE_ACU_II               3819
+#define MACH_TYPE_AVALON               3820
+#define MACH_TYPE_SPHINX               3821
+#define MACH_TYPE_TITAN_T              3822
+#define MACH_TYPE_HARVEST_BORIS        3823
+#define MACH_TYPE_MACH_MSM7X30_M3S     3824
+#define MACH_TYPE_SMDK5250             3825
+#define MACH_TYPE_IMXT_LITE            3826
+#define MACH_TYPE_IMXT_STD             3827
+#define MACH_TYPE_IMXT_LOG             3828
+#define MACH_TYPE_IMXT_NAV             3829
+#define MACH_TYPE_IMXT_FULL            3830
+#define MACH_TYPE_AG09015              3831
+#define MACH_TYPE_DP1ARM9              3833
+#define MACH_TYPE_PICASSO_M            3834
+#define MACH_TYPE_VIDEO_GADGET         3835
+#define MACH_TYPE_MTT_OM3X             3836
+#define MACH_TYPE_MX6Q_ARM2            3837
+#define MACH_TYPE_PICOSAM9G45          3838
+#define MACH_TYPE_VPM_DM365            3839
+#define MACH_TYPE_BONFIRE              3840
+#define MACH_TYPE_MT2P2D               3841
+#define MACH_TYPE_SIGPDA01             3842
+#define MACH_TYPE_CN27                 3843
+#define MACH_TYPE_MX25_CWTAP           3844
+#define MACH_TYPE_APF28                3845
+#define MACH_TYPE_PELCO_MAXWELL        3846
+#define MACH_TYPE_GE_PHOENIX           3847
+#define MACH_TYPE_EMPC_A500            3848
+#define MACH_TYPE_IMS_ARM9             3849
+#define MACH_TYPE_MINI2416             3850
+#define MACH_TYPE_MINI2450             3851
+#define MACH_TYPE_MINI310              3852
+#define MACH_TYPE_SPEAR_HURRICANE      3853
+#define MACH_TYPE_MT7208               3854
+#define MACH_TYPE_LPC178X              3855
+#define MACH_TYPE_FARLEYS              3856
+#define MACH_TYPE_EFM32GG_DK3750       3857
+#define MACH_TYPE_ZEUS_BOARD           3858
+#define MACH_TYPE_CC51                 3859
+#define MACH_TYPE_FXI_C210             3860
+#define MACH_TYPE_MSM8627_CDP          3861
+#define MACH_TYPE_MSM8627_MTP          3862
+#define MACH_TYPE_ARMADILLO800EVA      3863
+#define MACH_TYPE_PRIMOU               3864
+#define MACH_TYPE_PRIMOC               3865
+#define MACH_TYPE_PRIMOCT              3866
+#define MACH_TYPE_A9500                3867
+#define MACH_TYPE_PULSE_TD             3868
+#define MACH_TYPE_PLUTO                3869
+#define MACH_TYPE_ACFX100              3870
+#define MACH_TYPE_MSM8625_RUMI3        3871
+#define MACH_TYPE_VALENTE              3872
+#define MACH_TYPE_CRFS_RFEYE           3873
+#define MACH_TYPE_RFEYE                3874
+#define MACH_TYPE_PHIDGET_SBC3         3875
+#define MACH_TYPE_TCW_MIKA             3876
+#define MACH_TYPE_IMX28_EGF            3877
+#define MACH_TYPE_VALENTE_WX           3878
+#define MACH_TYPE_HUANGSHANS           3879
+#define MACH_TYPE_BOSPHORUS1           3880
+#define MACH_TYPE_PRIMA                3881
+#define MACH_TYPE_M3_SKT               3882
+#define MACH_TYPE_M3_REF               3883
+#define MACH_TYPE_EVITA_ULK            3884
+#define MACH_TYPE_MERISC600            3885
+#define MACH_TYPE_DOLAK                3886
+#define MACH_TYPE_SBC53                3887
+#define MACH_TYPE_ELITE_ULK            3888
+#define MACH_TYPE_POV2                 3889
+#define MACH_TYPE_IPOD_TOUCH_2G        3890
+#define MACH_TYPE_DA850_PQAB           3891
+#define MACH_TYPE_FERMI                3892
+#define MACH_TYPE_CCARDWMX28           3893
+#define MACH_TYPE_CCARDMX28            3894
+#define MACH_TYPE_FS20_FCM2050         3895
+#define MACH_TYPE_KINETIS              3896
+#define MACH_TYPE_KAI                  3897
+#define MACH_TYPE_BCTHB2               3898
+#define MACH_TYPE_INELS3_CU            3899
+#define MACH_TYPE_JUNIPER              3900
+#define MACH_TYPE_DA850_APOLLO         3901
+#define MACH_TYPE_TRACNAS              3902
+#define MACH_TYPE_MITYARM335X          3903
+#define MACH_TYPE_XCGZ7X               3904
+#define MACH_TYPE_CUBOX                3905
+#define MACH_TYPE_TERMINATOR           3906
+#define MACH_TYPE_EYE03                3907
+#define MACH_TYPE_KOTA3                3908
+#define MACH_TYPE_MX5                  3909
+#define MACH_TYPE_PSCPE                3910
+#define MACH_TYPE_AKT1100              3911
+#define MACH_TYPE_PCAAXL2              3912
+#define MACH_TYPE_PRIMODD_CT           3913
+#define MACH_TYPE_NSBC                 3914
+#define MACH_TYPE_MESON2_SKT           3915
+#define MACH_TYPE_MESON2_REF           3916
+#define MACH_TYPE_CCARDWMX28JS         3917
+#define MACH_TYPE_CCARDMX28JS          3918
+#define MACH_TYPE_INDICO               3919
+#define MACH_TYPE_MSM8960DT            3920
+#define MACH_TYPE_PRIMODS              3921
+#define MACH_TYPE_BELUGA_M1388         3922
+#define MACH_TYPE_PRIMOTD              3923
+#define MACH_TYPE_VARAN_MASTER         3924
+#define MACH_TYPE_PRIMODD              3925
+#define MACH_TYPE_JETDUO               3926
+#define MACH_TYPE_MX53_UMOBO           3927
+#define MACH_TYPE_TRATS                3928
+#define MACH_TYPE_STARCRAFT            3929
+#define MACH_TYPE_QSEVEN_TEGRA2        3930
+#define MACH_TYPE_LICHEE_SUN4I_DEVBD   3931
+#define MACH_TYPE_MOVENOW              3932
+#define MACH_TYPE_GOLF_U               3933
+#define MACH_TYPE_MSM7627A_EVB         3934
+#define MACH_TYPE_RAMBO                3935
+#define MACH_TYPE_GOLFU                3936
+#define MACH_TYPE_MANGO310             3937
+#define MACH_TYPE_DNS343               3938
+#define MACH_TYPE_VAR_SOM_OM44         3939
+#define MACH_TYPE_NAON                 3940
+#define MACH_TYPE_VP4000               3941
+#define MACH_TYPE_IMPCARD              3942
+#define MACH_TYPE_SMOOVCAM             3943
+#define MACH_TYPE_COBHAM3725           3944
+#define MACH_TYPE_COBHAM3730           3945
+#define MACH_TYPE_COBHAM3703           3946
+#define MACH_TYPE_QUETZAL              3947
+#define MACH_TYPE_APQ8064_CDP          3948
+#define MACH_TYPE_APQ8064_MTP          3949
+#define MACH_TYPE_APQ8064_FLUID        3950
+#define MACH_TYPE_APQ8064_LIQUID       3951
+#define MACH_TYPE_MANGO210             3952
+#define MACH_TYPE_MANGO100             3953
+#define MACH_TYPE_MANGO24              3954
+#define MACH_TYPE_MANGO64              3955
+#define MACH_TYPE_NSA320               3956
+#define MACH_TYPE_ELV_CCU2             3957
+#define MACH_TYPE_TRITON_X00           3958
+#define MACH_TYPE_TRITON_1500_2000     3959
+#define MACH_TYPE_POGOPLUGV4           3960
+#define MACH_TYPE_VENUS_CL             3961
+#define MACH_TYPE_VULCANO_G20          3962
+#define MACH_TYPE_SGS_I9100            3963
+#define MACH_TYPE_STSV2                3964
+#define MACH_TYPE_CSB1724              3965
+#define MACH_TYPE_OMAPL138_LCDK        3966
+#define MACH_TYPE_JEWEL_DD             3967
+#define MACH_TYPE_PVD_MX25             3968
+#define MACH_TYPE_MESON6_SKT           3969
+#define MACH_TYPE_MESON6_REF           3970
+#define MACH_TYPE_PXM                  3971
+#define MACH_TYPE_S3                   3972
+#define MACH_TYPE_POGOPLUGV3           3973
+#define MACH_TYPE_MLP89626             3974
+#define MACH_TYPE_IOMEGAHMNDCE         3975
+#define MACH_TYPE_POGOPLUGV3PCI        3976
+#define MACH_TYPE_BNTV250              3977
+#define MACH_TYPE_MX53_QSEVEN          3978
+#define MACH_TYPE_GTL_IT1100           3979
+#define MACH_TYPE_MX6Q_SABRESD         3980
+#define MACH_TYPE_MT4                  3981
+#define MACH_TYPE_JUMBO_D              3982
+#define MACH_TYPE_JUMBO_I              3983
+#define MACH_TYPE_FS20_DMP             3984
+#define MACH_TYPE_DNS320               3985
+#define MACH_TYPE_MX28BACOS            3986
+#define MACH_TYPE_TL80                 3987
+#define MACH_TYPE_POLATIS_NIC_1001     3988
+#define MACH_TYPE_TELY                 3989
+#define MACH_TYPE_U8520                3990
+#define MACH_TYPE_MANTA                3991
+#define MACH_TYPE_SPEAR_EM_S900        3992
+#define MACH_TYPE_MPQ8064_CDP          3993
+#define MACH_TYPE_MPQ8064_STB          3994
+#define MACH_TYPE_MPQ8064_DTV          3995
+#define MACH_TYPE_DM368SOM             3996
+#define MACH_TYPE_GPRISB2              3997
+#define MACH_TYPE_CHAMMID              3998
+#define MACH_TYPE_SEOUL2               3999
+#define MACH_TYPE_OMAP4_NOOKTABLET     4000
+#define MACH_TYPE_AALTO                4001
+#define MACH_TYPE_METRO                4002
+#define MACH_TYPE_CYDM3730             4003
+#define MACH_TYPE_TQMA53               4004
+#define MACH_TYPE_MSM7627A_QRD3        4005
+#define MACH_TYPE_MX28_CANBY           4006
+#define MACH_TYPE_TIGER                4007
+#define MACH_TYPE_PCATS_9307_TYPE_A    4008
+#define MACH_TYPE_PCATS_9307_TYPE_O    4009
+#define MACH_TYPE_PCATS_9307_TYPE_R    4010
+#define MACH_TYPE_STREAMPLUG           4011
+#define MACH_TYPE_ICECHICKEN_DEV       4012
+#define MACH_TYPE_HEDGEHOG             4013
+#define MACH_TYPE_YUSEND_OBC           4014
+#define MACH_TYPE_IMXNINJA             4015
+#define MACH_TYPE_OMAP4_JAROD          4016
+#define MACH_TYPE_ECO5_PK              4017
+#define MACH_TYPE_QJ2440               4018
+#define MACH_TYPE_MX6Q_MERCURY         4019
+#define MACH_TYPE_CM6810               4020
+#define MACH_TYPE_OMAP4_TORPEDO        4021
+#define MACH_TYPE_NSA310               4022
+#define MACH_TYPE_TMX536               4023
+#define MACH_TYPE_KTT20                4024
+#define MACH_TYPE_DRAGONIX             4025
+#define MACH_TYPE_LUNGCHING            4026
+#define MACH_TYPE_BULOGICS             4027
+#define MACH_TYPE_MX535_SX             4028
+#define MACH_TYPE_NGUI3250             4029
+#define MACH_TYPE_SALUTEC_DAC          4030
+#define MACH_TYPE_LOCO                 4031
+#define MACH_TYPE_CTERA_PLUG_USI       4032
+#define MACH_TYPE_SCEPTER              4033
+#define MACH_TYPE_SGA                  4034
+#define MACH_TYPE_P_81_J5              4035
+#define MACH_TYPE_P_81_O4              4036
+#define MACH_TYPE_MSM8625_SURF         4037
+#define MACH_TYPE_CARALLON_SHARK       4038
+#define MACH_TYPE_LSGCICAM             4039
+#define MACH_TYPE_ORDOG                4040
+#define MACH_TYPE_PUENTE_IO            4041
+#define MACH_TYPE_MSM8625_EVB          4042
+#define MACH_TYPE_EV_AM1707            4043
+#define MACH_TYPE_EV_AM1707E2          4044
+#define MACH_TYPE_EV_AM3517E2          4045
+#define MACH_TYPE_CALABRIA             4046
+#define MACH_TYPE_EV_IMX287            4047
+#define MACH_TYPE_ERAU                 4048
+#define MACH_TYPE_SICHUAN              4049
+#define MACH_TYPE_WIRMA3               4050
+#define MACH_TYPE_DAVINCI_DA850        4051
+#define MACH_TYPE_OMAP138_TRUNARC      4052
+#define MACH_TYPE_BCM4761              4053
+#define MACH_TYPE_PICASSO_E2           4054
+#define MACH_TYPE_PICASSO_MF           4055
+#define MACH_TYPE_MIRO                 4056
+#define MACH_TYPE_AT91SAM9G20EWON3     4057
+#define MACH_TYPE_YOYO                 4058
+#define MACH_TYPE_WINDJKL              4059
+#define MACH_TYPE_MONARUDO             4060
+#define MACH_TYPE_BATAN                4061
+#define MACH_TYPE_TADAO                4062
+#define MACH_TYPE_BASO                 4063
+#define MACH_TYPE_MAHON                4064
+#define MACH_TYPE_VILLEC2              4065
+#define MACH_TYPE_ASI1230              4066
+#define MACH_TYPE_ALASKA               4067
+#define MACH_TYPE_SWARCO_SHDSL2        4068
+#define MACH_TYPE_OXRTU                4069
+#define MACH_TYPE_OMAP5_PANDA          4070
+#define MACH_TYPE_MX28XDI              4071
+#define MACH_TYPE_C8000                4072
+#define MACH_TYPE_BJE_DISPLAY3_5       4073
+#define MACH_TYPE_PICOMOD7             4074
+#define MACH_TYPE_PICOCOM5             4075
+#define MACH_TYPE_QBLISSA8             4076
+#define MACH_TYPE_ARMSTONEA8           4077
+#define MACH_TYPE_NETDCU14             4078
+#define MACH_TYPE_AT91SAM9X5_EPIPHAN   4079
+#define MACH_TYPE_P2U                  4080
+#define MACH_TYPE_DORIS                4081
+#define MACH_TYPE_J49                  4082
+#define MACH_TYPE_VDSS2E               4083
+#define MACH_TYPE_VC300                4084
+#define MACH_TYPE_NS115_PAD_TEST       4085
+#define MACH_TYPE_NS115_PAD_REF        4086
+#define MACH_TYPE_NS115_PHONE_TEST     4087
+#define MACH_TYPE_NS115_PHONE_REF      4088
+#define MACH_TYPE_GOLFC                4089
+#define MACH_TYPE_XEROX_OLYMPUS        4090
+#define MACH_TYPE_MX6SL_ARM2           4091
+#define MACH_TYPE_CSB1701_CSB1726      4092
+#define MACH_TYPE_AT91SAM9XEEK         4093
+#define MACH_TYPE_EBV210               4094
+#define MACH_TYPE_MSM7627A_QRD7        4095
+#define MACH_TYPE_SVTHIN               4096
+#define MACH_TYPE_DUOVERO              4097
+#define MACH_TYPE_CHUPACABRA           4098
+#define MACH_TYPE_SCORPION             4099
+#define MACH_TYPE_DAVINCI_HE_HMI10     4100
+#define MACH_TYPE_TOPKICK              4101
+#define MACH_TYPE_M3_AUGUESTRUSH       4102
+#define MACH_TYPE_IPC335X              4103
+#define MACH_TYPE_SUN4I                4104
+#define MACH_TYPE_IMX233_OLINUXINO     4105
+#define MACH_TYPE_K2_WL                4106
+#define MACH_TYPE_K2_UL                4107
+#define MACH_TYPE_K2_CL                4108
+#define MACH_TYPE_MINBARI_W            4109
+#define MACH_TYPE_MINBARI_M            4110
+#define MACH_TYPE_K035                 4111
+#define MACH_TYPE_ARIEL                4112
+#define MACH_TYPE_ARIELSAARC           4113
+#define MACH_TYPE_ARIELDKB             4114
+#define MACH_TYPE_ARMADILLO810         4115
+#define MACH_TYPE_TAM335X              4116
+#define MACH_TYPE_GROUPER              4117
+#define MACH_TYPE_MPCSA21_9G20         4118
+#define MACH_TYPE_M6U_CPU              4119
+#define MACH_TYPE_DAVINCI_DP10         4120
+#define MACH_TYPE_GINKGO               4121
+#define MACH_TYPE_CGT_QMX6             4122
+#define MACH_TYPE_PROFPGA              4123
+#define MACH_TYPE_ACFX100OC            4124
+#define MACH_TYPE_ACFX100NB            4125
+#define MACH_TYPE_CAPRICORN            4126
+#define MACH_TYPE_PISCES               4127
+#define MACH_TYPE_ARIES                4128
+#define MACH_TYPE_CANCER               4129
+#define MACH_TYPE_LEO                  4130
+#define MACH_TYPE_VIRGO                4131
+#define MACH_TYPE_SAGITTARIUS          4132
+#define MACH_TYPE_DEVIL                4133
+#define MACH_TYPE_BALLANTINES          4134
+#define MACH_TYPE_OMAP3_PROCERUSVPU    4135
+#define MACH_TYPE_MY27                 4136
+#define MACH_TYPE_SUN6I                4137
+#define MACH_TYPE_SUN5I                4138
+#define MACH_TYPE_MX512_MX             4139
+#define MACH_TYPE_KZM9G                4140
+#define MACH_TYPE_VDSTBN               4141
+#define MACH_TYPE_CFA10036             4142
+#define MACH_TYPE_CFA10049             4143
+#define MACH_TYPE_PCM051               4144
+#define MACH_TYPE_VYBRID_VF7XX         4145
+#define MACH_TYPE_VYBRID_VF6XX         4146
+#define MACH_TYPE_VYBRID_VF5XX         4147
+#define MACH_TYPE_VYBRID_VF4XX         4148
+#define MACH_TYPE_ARIA_G25             4149
+#define MACH_TYPE_BCM21553             4150
+#define MACH_TYPE_SMDK5410             4151
+#define MACH_TYPE_LPC18XX              4152
+#define MACH_TYPE_ORATISPARTY          4153
+#define MACH_TYPE_QSEVEN               4154
+#define MACH_TYPE_GMV_GENERIC          4155
+#define MACH_TYPE_TH_LINK_ETH          4156
+#define MACH_TYPE_TN_MUNINN            4157
+#define MACH_TYPE_RAMPAGE              4158
+#define MACH_TYPE_VISSTRIM_MV10        4159
+#define MACH_TYPE_MONACO_TDU           4160
+#define MACH_TYPE_MONACO_UL            4161
+#define MACH_TYPE_ENRC2_U              4162
+#define MACH_TYPE_EVITA_UL             4163
+#define MACH_TYPE_MX28_WILMA           4164
+#define MACH_TYPE_MONACO_U             4165
+#define MACH_TYPE_MSM8625_FFA          4166
+#define MACH_TYPE_VPU101               4167
+#define MACH_TYPE_OPERA_UL             4168
+#define MACH_TYPE_BAILEYS              4169
+#define MACH_TYPE_FAMILYBOX            4170
+#define MACH_TYPE_ENSEMBLE_MX35        4171
+#define MACH_TYPE_SC_SPS_1             4172
+#define MACH_TYPE_UCSIMPLY_SAM9260     4173
+#define MACH_TYPE_UNICORN              4174
+#define MACH_TYPE_M9G45A               4175
+#define MACH_TYPE_MTWEBIF              4176
+#define MACH_TYPE_PLAYSTONE            4177
+#define MACH_TYPE_CHELSEA              4178
+#define MACH_TYPE_BAYERN               4179
+#define MACH_TYPE_MITWO                4180
+#define MACH_TYPE_MX25_NOAH            4181
+#define MACH_TYPE_STM_B2020            4182
+#define MACH_TYPE_ANNAX_SRC            4183
+#define MACH_TYPE_IONICS_STRATUS       4184
+#define MACH_TYPE_HUGO                 4185
+#define MACH_TYPE_EM300                4186
+#define MACH_TYPE_MMP3_QSEVEN          4187
+#define MACH_TYPE_BOSPHORUS2           4188
+#define MACH_TYPE_TT2200               4189
+#define MACH_TYPE_OCELOT3              4190
+#define MACH_TYPE_TEK_COBRA            4191
+#define MACH_TYPE_PROTOU               4192
+#define MACH_TYPE_MSM8625_EVT          4193
+#define MACH_TYPE_MX53_SELLWOOD        4194
+#define MACH_TYPE_SOMIQ_AM35           4195
+#define MACH_TYPE_SOMIQ_AM37           4196
+#define MACH_TYPE_K2_PLC_CL            4197
+#define MACH_TYPE_TC2                  4198
+#define MACH_TYPE_DULEX_J              4199
+#define MACH_TYPE_STM_B2044            4200
+#define MACH_TYPE_DELUXE_J             4201
+#define MACH_TYPE_MANGO2443            4202
+#define MACH_TYPE_CP2DCG               4203
+#define MACH_TYPE_CP2DTG               4204
+#define MACH_TYPE_CP2DUG               4205
+#define MACH_TYPE_VAR_SOM_AM33         4206
+#define MACH_TYPE_PEPPER               4207
+#define MACH_TYPE_MANGO2450            4208
+#define MACH_TYPE_VALENTE_WX_C9        4209
+#define MACH_TYPE_MINITV               4210
+#define MACH_TYPE_U8540                4211
+#define MACH_TYPE_IV_ATLAS_I_Z7E       4212
+#define MACH_TYPE_COGENT_CSB1733       4213
+#define MACH_TYPE_MACH_TYPE_SKY        4214
+#define MACH_TYPE_BLUESKY              4215
+#define MACH_TYPE_NGROUTER             4216
+#define MACH_TYPE_MX53_DENETIM         4217
+#define MACH_TYPE_OPAL                 4218
+#define MACH_TYPE_GNET_US3GREF         4219
+#define MACH_TYPE_GNET_NC3G            4220
+#define MACH_TYPE_GNET_GE3G            4221
+#define MACH_TYPE_ADP2                 4222
+#define MACH_TYPE_TQMA28               4223
+#define MACH_TYPE_KACOM3               4224
+#define MACH_TYPE_RRHDEMO              4225
+#define MACH_TYPE_PROTODUG             4226
+#define MACH_TYPE_LAGO                 4227
+#define MACH_TYPE_KTT30                4228
+#define MACH_TYPE_TS43XX               4229
+#define MACH_TYPE_MX6Q_DENSO           4230
+#define MACH_TYPE_COMSAT_GSMUMTS8      4231
+#define MACH_TYPE_DREAMX               4232
+#define MACH_TYPE_THUNDERSTONEM        4233
+#define MACH_TYPE_YOYOPAD              4234
+#define MACH_TYPE_YOYOPATIENT          4235
+#define MACH_TYPE_A10L                 4236
+#define MACH_TYPE_MQ60                 4237
+#define MACH_TYPE_LINKSTATION_LSQL     4238
+#define MACH_TYPE_AM3703GATEWAY        4239
+#define MACH_TYPE_ACCIPITER            4240
+#define MACH_TYPE_P1853                4241
+#define MACH_TYPE_MAGNIDUG             4242
+#define MACH_TYPE_HYDRA                4243
+#define MACH_TYPE_SUN3I                4244
+#define MACH_TYPE_STM_B2078            4245
+#define MACH_TYPE_AT91SAM9263DESKV2    4246
+#define MACH_TYPE_DELUXE_R             4247
+#define MACH_TYPE_P_98_V               4248
+#define MACH_TYPE_P_98_C               4249
+#define MACH_TYPE_DAVINCI_AM18XX_OMN   4250
+#define MACH_TYPE_SOCFPGA_CYCLONE5     4251
+#define MACH_TYPE_CABATUIN             4252
+#define MACH_TYPE_YOYOPAD_FT           4253
+#define MACH_TYPE_DAN2400EVB           4254
+#define MACH_TYPE_DAN3400EVB           4255
+#define MACH_TYPE_EDM_SF_IMX6          4256
+#define MACH_TYPE_EDM_CF_IMX6          4257
+#define MACH_TYPE_VPOS3XX              4258
+#define MACH_TYPE_VULCANO_9X5          4259
+#define MACH_TYPE_SPMP8000             4260
+#define MACH_TYPE_CATALINA             4261
+#define MACH_TYPE_RD88F5181L_FE        4262
+#define MACH_TYPE_MX535_MX             4263
+#define MACH_TYPE_ARMADILLO840         4264
+#define MACH_TYPE_SPC9000BASEBOARD     4265
+#define MACH_TYPE_IRIS                 4266
+#define MACH_TYPE_PROTODCG             4267
+#define MACH_TYPE_PALMTREE             4268
+#define MACH_TYPE_NOVENA               4269
+#define MACH_TYPE_MA_UM                4270
+#define MACH_TYPE_MA_AM                4271
+#define MACH_TYPE_EMS348               4272
+#define MACH_TYPE_CM_FX6               4273
+#define MACH_TYPE_ARNDALE              4274
+#define MACH_TYPE_Q5XR5                4275
+#define MACH_TYPE_WILLOW               4276
+#define MACH_TYPE_OMAP3621_ODYV3       4277
+#define MACH_TYPE_OMAPL138_PRESONUS    4278
+#define MACH_TYPE_DVF99                4279
+#define MACH_TYPE_IMPRESSION_J         4280
+#define MACH_TYPE_QBLISSA9             4281
+#define MACH_TYPE_ROBIN_HELIVIEW10     4282
+#define MACH_TYPE_SUN7I                4283
+#define MACH_TYPE_MX6Q_HDMIDONGLE      4284
+#define MACH_TYPE_MX6_SID2             4285
+#define MACH_TYPE_HELIOS_V3            4286
+#define MACH_TYPE_HELIOS_V4            4287
+#define MACH_TYPE_Q7_IMX6              4288
+#define MACH_TYPE_ODROIDX              4289
+#define MACH_TYPE_ROBPRO               4290
+#define MACH_TYPE_RESEARCH59IF_MK1     4291
+#define MACH_TYPE_BOBSLEIGH            4292
+#define MACH_TYPE_DCSHGWT3             4293
+#define MACH_TYPE_GLD1018              4294
+#define MACH_TYPE_EV10                 4295
+#define MACH_TYPE_NITROGEN6X           4296
+#define MACH_TYPE_P_107_BB             4297
+#define MACH_TYPE_EVITA_UTL            4298
+#define MACH_TYPE_FALCONWING           4299
+#define MACH_TYPE_DCT3                 4300
+#define MACH_TYPE_CPX2E_CELL           4301
+#define MACH_TYPE_AMIRO                4302
+#define MACH_TYPE_MX6Q_BRASSBOARD      4303
+#define MACH_TYPE_DALMORE              4304
+#define MACH_TYPE_OMAP3_PORTAL7CP      4305
+#define MACH_TYPE_TEGRA_PLUTO          4306
+#define MACH_TYPE_MX6SL_EVK            4307
+#define MACH_TYPE_M7                   4308
+#define MACH_TYPE_PXM2                 4309
+#define MACH_TYPE_HABA_KNX_LITE        4310
+#define MACH_TYPE_TAI                  4311
+#define MACH_TYPE_PROTOTD              4312
+#define MACH_TYPE_DST_TONTO            4313
+#define MACH_TYPE_DRACO                4314
+#define MACH_TYPE_DXR2                 4315
+#define MACH_TYPE_RUT                  4316
+#define MACH_TYPE_AM180X_WSC           4317
+#define MACH_TYPE_DELUXE_U             4318
+#define MACH_TYPE_DELUXE_UL            4319
+#define MACH_TYPE_AT91SAM9260MEDTHS    4320
+#define MACH_TYPE_MATRIX516            4321
+#define MACH_TYPE_VID401X              4322
+#define MACH_TYPE_HELIOS_V5            4323
+#define MACH_TYPE_PLAYPAQ2             4324
+#define MACH_TYPE_IGAM                 4325
+#define MACH_TYPE_AMICO_I              4326
+#define MACH_TYPE_AMICO_E              4327
+#define MACH_TYPE_SENTIENT_MM3_CK      4328
+#define MACH_TYPE_SMX6                 4329
+#define MACH_TYPE_PANGO                4330
+#define MACH_TYPE_NS115_STICK          4331
+#define MACH_TYPE_BCTRM3               4332
+#define MACH_TYPE_DOCTORWS             4333
+#define MACH_TYPE_M2601                4334
+#define MACH_TYPE_GRIDCO_TRINITY       4335
+#define MACH_TYPE_PC3032               4336
+#define MACH_TYPE_VGG1111              4337
+#define MACH_TYPE_COUNTACH             4338
+#define MACH_TYPE_VISSTRIM_SM20        4339
+#define MACH_TYPE_A639                 4340
+#define MACH_TYPE_SPACEMONKEY          4341
+#define MACH_TYPE_ZPDU_STAMP           4342
+#define MACH_TYPE_HTC_G7_CLONE         4343
+#define MACH_TYPE_FT2080_CORVUS        4344
+#define MACH_TYPE_FISLAND              4345
+#define MACH_TYPE_ZPDU                 4346
+#define MACH_TYPE_URT                  4347
+#define MACH_TYPE_CONTI_OVIP           4348
+#define MACH_TYPE_OMAPL138_NAGRA       4349
+#define MACH_TYPE_DA850_AT3KP1         4350
+#define MACH_TYPE_DA850_AT3KP2         4351
+#define MACH_TYPE_SURMA                4352
+#define MACH_TYPE_STM_B2092            4353
+#define MACH_TYPE_MX535_YCR            4354
+#define MACH_TYPE_M7_WL                4355
+#define MACH_TYPE_M7_U                 4356
+#define MACH_TYPE_OMAP3_STNDT_EVM      4357
+#define MACH_TYPE_M7_WLV               4358
+#define MACH_TYPE_XAM3517              4359
+#define MACH_TYPE_A220                 4360
+#define MACH_TYPE_ACLIMA_ODIE          4361
+#define MACH_TYPE_VIBBLE               4362
+#define MACH_TYPE_K2_U                 4363
+#define MACH_TYPE_MX53_EGF             4364
+#define MACH_TYPE_NOVPEK_IMX53         4365
+#define MACH_TYPE_NOVPEK_IMX6X         4366
+#define MACH_TYPE_MX25_SMARTBOX        4367
+#define MACH_TYPE_EICG6410             4368
+#define MACH_TYPE_PICASSO_E3           4369
+#define MACH_TYPE_MOTONAVIGATOR        4370
+#define MACH_TYPE_VARIOCONNECT2        4371
+#define MACH_TYPE_DELUXE_TW            4372
+#define MACH_TYPE_KORE3                4374
+#define MACH_TYPE_MX6S_DRS             4375
+#define MACH_TYPE_CMIMX6               4376
+#define MACH_TYPE_ROTH                 4377
+#define MACH_TYPE_EQ4UX                4378
+#define MACH_TYPE_X1PLUS               4379
+#define MACH_TYPE_MODIMX27             4380
+#define MACH_TYPE_VIDEON_HDUAC         4381
+#define MACH_TYPE_BLACKBIRD            4382
+#define MACH_TYPE_RUNMASTER            4383
+#define MACH_TYPE_CERES                4384
+#define MACH_TYPE_NAD435               4385
+#define MACH_TYPE_NS115_PROTO_TYPE     4386
+#define MACH_TYPE_FS20_VCC             4387
+#define MACH_TYPE_MESON6TV             4388
+#define MACH_TYPE_MESON6TV_SKT         4389
+#define MACH_TYPE_KEYSTONE             4390
+#define MACH_TYPE_PCM052               4391
+#define MACH_TYPE_TYPE                 4392
+#define MACH_TYPE_QRD_SKUD_PRIME       4393
+#define MACH_TYPE_RAINBOWG15           4394
+#define MACH_TYPE_GUF_SANTARO          4395
+#define MACH_TYPE_SHEEPSHEAD           4396
+#define MACH_TYPE_MX6_IWG15M_MXM       4397
+#define MACH_TYPE_MX6_IWG15M_Q7        4398
+#define MACH_TYPE_AT91SAM9263IF8MIC    4399
+#define MACH_TYPE_EXCEL                4400
+#define MACH_TYPE_MARCOPOLO            4401
+#define MACH_TYPE_MX535_SDCR           4402
+#define MACH_TYPE_MX53_CSB2733         4403
+#define MACH_TYPE_DIVA                 4404
+#define MACH_TYPE_NCR_7744             4405
+#define MACH_TYPE_MACALLAN             4406
+#define MACH_TYPE_WNR3500              4407
+#define MACH_TYPE_PGAVRF               4408
+#define MACH_TYPE_HELIOS_V6            4409
+#define MACH_TYPE_LCCT                 4410
+#define MACH_TYPE_CSNDUG               4411
+#define MACH_TYPE_WANDBOARD_IMX6       4412
+#define MACH_TYPE_OMAP4_JET            4413
+#define MACH_TYPE_TEGRA_ROTH           4414
+#define MACH_TYPE_M7DCG                4415
+#define MACH_TYPE_M7DUG                4416
+#define MACH_TYPE_M7DTG                4417
+#define MACH_TYPE_AP42X                4418
+#define MACH_TYPE_VAR_SOM_MX6          4419
+#define MACH_TYPE_PDLU                 4420
+#define MACH_TYPE_HYDROGEN             4421
+#define MACH_TYPE_NPA211E              4422
+#define MACH_TYPE_ARCADIA              4423
+#define MACH_TYPE_ARCADIA_L            4424
+#define MACH_TYPE_MSM8930DT            4425
+#define MACH_TYPE_KTAM3874             4426
+#define MACH_TYPE_CEC4                 4427
+#define MACH_TYPE_APE6EVM              4428
+#define MACH_TYPE_TX6                  4429
+#define MACH_TYPE_OWENSOM              4430
+#define MACH_TYPE_CFA10037             4431
+#define MACH_TYPE_NATEKS_VOIP          4432
+#define MACH_TYPE_EZP1000              4433
+#define MACH_TYPE_WGR826V              4434
+#define MACH_TYPE_EXUMA                4435
+#define MACH_TYPE_FREGATE              4436
+#define MACH_TYPE_OSIRISIMX508         4437
+#define MACH_TYPE_ST_EXIGO             4438
+#define MACH_TYPE_PISMO                4439
+#define MACH_TYPE_ATC7                 4440
+#define MACH_TYPE_NSPIRECLP            4441
+#define MACH_TYPE_NSPIRETP             4442
+#define MACH_TYPE_NSPIRECX             4443
+#define MACH_TYPE_MAYA                 4444
+#define MACH_TYPE_WECCT                4445
+#define MACH_TYPE_M2S                  4446
+#define MACH_TYPE_MSM8625Q_EVBD        4447
+#define MACH_TYPE_TINY210              4448
+#define MACH_TYPE_G3                   4449
+#define MACH_TYPE_HURRICANE            4450
+#define MACH_TYPE_MX6_POD              4451
+#define MACH_TYPE_ELONDCN              4452
+#define MACH_TYPE_CWMX535              4453
+#define MACH_TYPE_M7_WLJ               4454
+#define MACH_TYPE_QSP_ARM              4455
+#define MACH_TYPE_MSM8625Q_SKUD        4456
+#define MACH_TYPE_HTCMONDRIAN          4457
+#define MACH_TYPE_WATSON_EAD           4458
+#define MACH_TYPE_MITWOA               4459
+#define MACH_TYPE_OMAP3_WOLVERINE      4460
+#define MACH_TYPE_MAPLETREE            4461
+#define MACH_TYPE_MSM8625_FIH_SAE      4462
+#define MACH_TYPE_EPC35                4463
+#define MACH_TYPE_SMARTRTU             4464
+#define MACH_TYPE_RCM101               4465
+#define MACH_TYPE_AMX_IMX53_MXX        4466
+#define MACH_TYPE_CP3DCG               4467
+#define MACH_TYPE_CP3DTG               4468
+#define MACH_TYPE_CP3DUG               4469
+#define MACH_TYPE_ACER_A12             4470
+#define MACH_TYPE_SBC6X                4471
+#define MACH_TYPE_U2                   4472
+#define MACH_TYPE_SMDK4270             4473
+#define MACH_TYPE_PRISCILLAG           4474
+#define MACH_TYPE_PRISCILLAC           4475
+#define MACH_TYPE_PRISCILLA            4476
+#define MACH_TYPE_INNOVA_SHPU_V2       4477
+#define MACH_TYPE_M7CDTU               4478
+#define MACH_TYPE_MACH_TYPE_DEP2410    4479
+#define MACH_TYPE_BCTRE3               4480
+#define MACH_TYPE_OMAP_M100            4481
+#define MACH_TYPE_FLO                  4482
+#define MACH_TYPE_NANOBONE             4483
+#define MACH_TYPE_STM_B2105            4484
+#define MACH_TYPE_OMAP4_BSC_BAP_V3     4485
+#define MACH_TYPE_SS1PAM               4486
+#define MACH_TYPE_DLXP_WL              4487
+#define MACH_TYPE_PRIMOMINIU           4488
+#define MACH_TYPE_MRT_35HD_DUALNAS_E   4489
+#define MACH_TYPE_KIWI                 4490
+#define MACH_TYPE_HW90496              4491
+#define MACH_TYPE_MEP2440              4492
+#define MACH_TYPE_COLIBRI_T30          4493
+#define MACH_TYPE_CWV1                 4494
+#define MACH_TYPE_NSA325               4495
+#define MACH_TYPE_DLXP_UL              4496
+#define MACH_TYPE_DPXMTC               4497
+#define MACH_TYPE_TT_STUTTGART         4498
+#define MACH_TYPE_MIRANDA_APCII        4499
+#define MACH_TYPE_MX6Q_MODEROX         4500
+#define MACH_TYPE_MUDSKIPPER           4501
+#define MACH_TYPE_URANIA               4502
+#define MACH_TYPE_STM_B2112            4503
+#define MACH_TYPE_GTOU                 4504
+#define MACH_TYPE_MX6Q_ATS_PHOENIX     4505
+#define MACH_TYPE_STM_B2116            4506
+#define MACH_TYPE_MYTHOLOGY            4507
+#define MACH_TYPE_FC360V1              4508
+#define MACH_TYPE_GPS_SENSOR           4509
+#define MACH_TYPE_GAZELLE              4510
+#define MACH_TYPE_MPQ8064_DMA          4511
+#define MACH_TYPE_WEMS_ASD01           4512
+#define MACH_TYPE_APALIS_T30           4513
+#define MACH_TYPE_MX6Q_QSBC35_C398     4514
+#define MACH_TYPE_ARMSTONEA9           4515
+#define MACH_TYPE_OMAP_BLAZETABLET     4516
+#define MACH_TYPE_AR6MXQ               4517
+#define MACH_TYPE_AR6MXS               4518
+#define MACH_TYPE_DETO_APOS_MX6        4519
+#define MACH_TYPE_GWVENTANA            4520
+#define MACH_TYPE_IGEP0033             4521
+#define MACH_TYPE_RACA                 4522
+#define MACH_TYPE_APPLESODA            4523
+#define MACH_TYPE_H52C1_CONCERTO       4524
+#define MACH_TYPE_FCMBRD               4525
+#define MACH_TYPE_PCAAXS1              4526
+#define MACH_TYPE_LS_ORCA              4527
+#define MACH_TYPE_PCM051LB             4528
+#define MACH_TYPE_MX6S_LP507_GVCI      4529
+#define MACH_TYPE_DIDO                 4530
+#define MACH_TYPE_SWARCO_ITC3_9G20     4531
+#define MACH_TYPE_ROBO_ROADY           4532
+#define MACH_TYPE_RSKRZA1              4533
+#define MACH_TYPE_SWARCO_SID           4534
+#define MACH_TYPE_MX6_IWG15S_SBC       4535
+#define MACH_TYPE_MX6Q_CAMARO          4536
+#define MACH_TYPE_HB6MXS               4537
+#define MACH_TYPE_LAGER                4538
+#define MACH_TYPE_LP8X4X               4539
+#define MACH_TYPE_TEGRATAB7            4540
+#define MACH_TYPE_ANDROMEDA            4541
+#define MACH_TYPE_BOOTES               4542
+#define MACH_TYPE_NETHMI               4543
+#define MACH_TYPE_TEGRATAB             4544
+#define MACH_TYPE_SOM5_EVB             4545
+#define MACH_TYPE_VENATICORUM          4546
+#define MACH_TYPE_STM_B2110            4547
+#define MACH_TYPE_ELUX_HATHOR          4548
+#define MACH_TYPE_HELIOS_V7            4549
+#define MACH_TYPE_XC10V1               4550
+#define MACH_TYPE_CP2U                 4551
+#define MACH_TYPE_IAP_F                4552
+#define MACH_TYPE_IAP_G                4553
+#define MACH_TYPE_AAE                  4554
+#define MACH_TYPE_PEGASUS              4555
+#define MACH_TYPE_CYGNUS               4556
+#define MACH_TYPE_CENTAURUS            4557
+#define MACH_TYPE_MSM8930_QRD8930      4558
+#define MACH_TYPE_QUBY_TIM             4559
+#define MACH_TYPE_ZEDI3250A            4560
+#define MACH_TYPE_GRUS                 4561
+#define MACH_TYPE_APOLLO3              4562
+#define MACH_TYPE_COWON_R7             4563
+#define MACH_TYPE_TONGA3               4564
+#define MACH_TYPE_P535                 4565
+#define MACH_TYPE_SA3874I              4566
+#define MACH_TYPE_MX6_NAVICO_COM       4567
+#define MACH_TYPE_PROXMOBIL2           4568
+#define MACH_TYPE_UBINUX1              4569
+#define MACH_TYPE_ISTOS                4570
+#define MACH_TYPE_BENVOLIO4            4571
+#define MACH_TYPE_ECO5_BX2             4572
+#define MACH_TYPE_EUKREA_CPUIMX28SD    4573
+#define MACH_TYPE_DOMOTAB              4574
+#define MACH_TYPE_PFLA03               4575
+#define MACH_TYPE_ET_CPU_301_16        4576
+#define MACH_TYPE_SKYWALKER            4577
+#define MACH_TYPE_SCORPIUS             4578
+#define MACH_TYPE_CAPRICORNUS          4579
+#define MACH_TYPE_LYRA                 4580
+#define MACH_TYPE_GATERO               4581
+#define MACH_TYPE_GATERO01             4582
+#define MACH_TYPE_Z4DTG                4583
+#define MACH_TYPE_LUPUS                4584
+#define MACH_TYPE_LEAP101              4585
+#define MACH_TYPE_CM_T335              4586
+#define MACH_TYPE_PNA                  4587
+#define MACH_TYPE_ECOFOREST_CPU2013    4588
+#define MACH_TYPE_APQ8064_DMA          4589
+#define MACH_TYPE_MX53_ARMOUR          4590
+#define MACH_TYPE_EUROFUNK_AEPL3       4591
+#define MACH_TYPE_EUROFUNK_MHLS3       4592
+#define MACH_TYPE_EUROFUNK_E1IF        4593
+#define MACH_TYPE_LEPUS                4594
+#define MACH_TYPE_BORA                 4595
+#define MACH_TYPE_ADS4011              4596
+#define MACH_TYPE_BEAVER               4597
+#define MACH_TYPE_IMX233_IUNGO         4598
+#define MACH_TYPE_CEPHEUS              4599
+#define MACH_TYPE_CETUS                4600
+#define MACH_TYPE_CHAMAELEON           4601
+#define MACH_TYPE_ARDBEG               4602
+#define MACH_TYPE_IXORA                4603
+#define MACH_TYPE_JUGLANS              4604
+#define MACH_TYPE_CANISMAJOR           4605
+#define MACH_TYPE_AT91SAM9263MIB       4606
+#define MACH_TYPE_COSINO_9G35          4607
+#define MACH_TYPE_TINY4412             4608
+#define MACH_TYPE_BALLOON4             4609
+#define MACH_TYPE_PGG                  4610
+#define MACH_TYPE_XXSQ701              4611
+#define MACH_TYPE_MX6_NAVICO_RDR       4612
+#define MACH_TYPE_PHANTOM              4613
+#define MACH_TYPE_CANISMINORH          4614
+#define MACH_TYPE_CARINA               4615
+#define MACH_TYPE_E1859                4616
+#define MACH_TYPE_ARMSTONEA5           4617
+#define MACH_TYPE_PICOCOMA5            4618
+#define MACH_TYPE_NETDCUA5             4619
+#define MACH_TYPE_MOLLY                4620
+#define MACH_TYPE_MASERATI             4621
+#define MACH_TYPE_MX53_IDEBX           4622
+#define MACH_TYPE_MX53_C2CB            4623
+#define MACH_TYPE_MIPSEE               4624
+#define MACH_TYPE_SEEKLOP              4625
+#define MACH_TYPE_AUDISEE              4626
+#define MACH_TYPE_TX48                 4627
+#define MACH_TYPE_TL7689_PAD_REF       4628
+#define MACH_TYPE_TL7689_PAD_TEST      4629
+#define MACH_TYPE_TL7689_PHONE_REF     4630
+#define MACH_TYPE_TL7689_PHONE_TEST    4631
+#define MACH_TYPE_SWARCO_SCC_WKS       4632
+#define MACH_TYPE_ACCORDO2             4633
+#define MACH_TYPE_TRIZEPS7             4634
+#define MACH_TYPE_F100                 4635
+#define MACH_TYPE_ARMADILLO410         4636
+#define MACH_TYPE_TINY2416             4637
+#define MACH_TYPE_TINY2451             4638
+#define MACH_TYPE_MINI2451             4639
+#define MACH_TYPE_TINY5250             4640
+#define MACH_TYPE_TINY3358             4641
+#define MACH_TYPE_T6_UL                4642
+#define MACH_TYPE_T6_U                 4643
+#define MACH_TYPE_T6_ULA               4644
+#define MACH_TYPE_T6_WL                4645
+#define MACH_TYPE_T6_WHL               4646
+#define MACH_TYPE_CIRCINUS             4647
+#define MACH_TYPE_SOCPK255             4648
+#define MACH_TYPE_SOCPRV270            4649
+#define MACH_TYPE_SOCPRC270            4650
+#define MACH_TYPE_MACH_CP5DTU          4651
+#define MACH_TYPE_CP5DTU               4652
+#define MACH_TYPE_CP5DUG               4653
+#define MACH_TYPE_CP5DWG               4654
+#define MACH_TYPE_AM335X_EGF           4655
+#define MACH_TYPE_AZM9G45              4656
+#define MACH_TYPE_AZM335X              4657
+#define MACH_TYPE_LYNBRD               4658
+#define MACH_TYPE_AM35X_EGF            4659
+#define MACH_TYPE_SEVULCAN             4660
+#define MACH_TYPE_AX8008M              4661
+#define MACH_TYPE_AX8008MR             4662
+#define MACH_TYPE_XYNIX                4663
+#define MACH_TYPE_OMAP3621_ODYV4       4664
+#define MACH_TYPE_MX6_CAMERONET        4665
+#define MACH_TYPE_OMAP4_DART           4666
+#define MACH_TYPE_MX6Q_ENZO            4667
+#define MACH_TYPE_EV_IMX287MICRO       4668
+#define MACH_TYPE_EV_IMX287MINI        4669
+#define MACH_TYPE_MX53_CEC2            4670
+#define MACH_TYPE_HELIOS_V8            4671
+#define MACH_TYPE_HELIOS_V9            4672
+#define MACH_TYPE_COGNAC               4673
+#define MACH_TYPE_ZEST                 4674
+#define MACH_TYPE_GC3                  4675
+#define MACH_TYPE_DAD_MEDIA            4676
+#define MACH_TYPE_HTOUCH               4677
+#define MACH_TYPE_SPT7500BASEBOARD     4678
+#define MACH_TYPE_OMAP4_DART_EVM       4679
+#define MACH_TYPE_MX53_TLV             4680
+#define MACH_TYPE_PDAK2H               4681
+#define MACH_TYPE_MATRIX513            4682
+#define MACH_TYPE_LIVEBOX01            4683
+#define MACH_TYPE_CEVRZA1L             4684
+#define MACH_TYPE_B1010                4685
+#define MACH_TYPE_FWTMK1               4686
+#define MACH_TYPE_GRENADA              4687
+#define MACH_TYPE_HASSEL               4688
+#define MACH_TYPE_ODROIDXU             4689
+#define MACH_TYPE_ODROIDU2             4690
+#define MACH_TYPE_NAIAD                4691
+#define MACH_TYPE_HARRIER              4692
+#define MACH_TYPE_PCL052               4693
+#define MACH_TYPE_LIBRA2404            4694
+#define MACH_TYPE_MX6_LEMONBOARD       4695
+#define MACH_TYPE_MX6_ATLAS            4696
+#define MACH_TYPE_ELECSYS_Z2           4697
+#define MACH_TYPE_ELECSYS_Z4           4698
+#define MACH_TYPE_IPQ806X_DB149        4699
+#define MACH_TYPE_PULSAR               4700
+#define MACH_TYPE_SCALANCEM            4701
+#define MACH_TYPE_NA11                 4702
+#define MACH_TYPE_IPQ806X_DB147        4703
+#define MACH_TYPE_IPQ806X_AP148        4704
+#define MACH_TYPE_AMLTD_IMX6           4705
+#define MACH_TYPE_PIA_AM335X           4706
+#define MACH_TYPE_BLADE                4707
+#define MACH_TYPE_MATISSE              4708
+#define MACH_TYPE_IKEBANA              4709
+#define MACH_TYPE_LF3000               4710
+#define MACH_TYPE_CARALLON_STINGRAY    4711
+#define MACH_TYPE_MENSA                4712
+#define MACH_TYPE_CES_COREBOARD        4713
+#define MACH_TYPE_VYBRID_IWG16M_UMXM   4714
+#define MACH_TYPE_LOKI                 4715
+#define MACH_TYPE_PCM053               4716
+#define MACH_TYPE_SMM200               4717
+#define MACH_TYPE_M507                 4718
+#define MACH_TYPE_ORSOC_ARMSOC_8695    4719
+#define MACH_TYPE_AM335X_ZY            4720
+#define MACH_TYPE_ARRAKIS              4721
+#define MACH_TYPE_SXLT                 4722
+#define MACH_TYPE_YLCM                 4723
+#define MACH_TYPE_EAGLE6D              4724
+#define MACH_TYPE_LCU1                 4725
+#define MACH_TYPE_MX6DL_IWG15M_Q7      4726
+#define MACH_TYPE_SBCPHYFLEXAM335      4727
+#define MACH_TYPE_SBCPHYCARDAM335      4728
+#define MACH_TYPE_SBCPHYFLEXIMX6       4729
+#define MACH_TYPE_HOMESERVERSTICK      4730
+#define MACH_TYPE_ECXEC                4731
+#define MACH_TYPE_HH300                4732
+#define MACH_TYPE_CPUCA8               4733
+#define MACH_TYPE_A0057_LSEMBEDDEDPC   4734
+#define MACH_TYPE_IPROC                4735
+#define MACH_TYPE_NEMESIS_NFE          4736
+#define MACH_TYPE_MABV3X25             4737
+#define MACH_TYPE_OCTANT               4738
+#define MACH_TYPE_MSM7X27_THUNDER      4739
+#define MACH_TYPE_MAXIM                4740
+#define MACH_TYPE_TELEMATICCTRLUNIT    4741
+#define MACH_TYPE_MX6Q_JCDBOX          4742
+#define MACH_TYPE_CKB_1808             4743
+#define MACH_TYPE_CKB_3352             4744
+#define MACH_TYPE_HIKIRK               4745
+#define MACH_TYPE_DNS320L              4746
+#define MACH_TYPE_STM_B2120            4747
+#define MACH_TYPE_STM_B2089            4748
+#define MACH_TYPE_COLIBRI_VF50         4749
+#define MACH_TYPE_COLIBRI_VF61         4750
+#define MACH_TYPE_SYNERGY2             4751
+#define MACH_TYPE_PCM051_HMI           4752
+#define MACH_TYPE_TEK2                 4753
+#define MACH_TYPE_DUCKBILL             4754
+#define MACH_TYPE_MX50_SEISMIC         4755
+#define MACH_TYPE_TWOFACE              4756
+#define MACH_TYPE_T10                  4757
+#define MACH_TYPE_LIB1313              4758
+#define MACH_TYPE_HIMX                 4759
+#define MACH_TYPE_VCM30_T30            4760
+#define MACH_TYPE_CORNERVIEW           4761
+#define MACH_TYPE_P01600               4762
+#define MACH_TYPE_AXEL                 4763
+#define MACH_TYPE_IMX6_ANDY            4764
+#define MACH_TYPE_NSA220               4765
+#define MACH_TYPE_TI8168HSC1           4766
+#define MACH_TYPE_DORY                 4767
+#define MACH_TYPE_ECV4                 4768
+#define MACH_TYPE_WEBBG3FLIGHT         4769
+#define MACH_TYPE_SBC_PHYCORE_AM335X   4770
+#define MACH_TYPE_TSC                  4771
+#define MACH_TYPE_IMX6_CLOUS           4772
+#define MACH_TYPE_C1                   4773
+#define MACH_TYPE_VCM30T30             4774
+#define MACH_TYPE_IMX6_EMSYM_BLURR     4775
+#define MACH_TYPE_PDIS_M               4776
+#define MACH_TYPE_MX6Q_REX             4777
+#define MACH_TYPE_SWARCO_FR_ANYBUS     4778
+#define MACH_TYPE_SHMAC                4779
+#define MACH_TYPE_CKB_RZA1H            4780
+#define MACH_TYPE_AZETI_SP_NG01        4781
+#define MACH_TYPE_E6210                4782
+#define MACH_TYPE_MH9001               4783
+#define MACH_TYPE_STM_B2147            4784
+#define MACH_TYPE_OMAP5_VARSOM         4785
+#define MACH_TYPE_CUBEA5               4786
+#define MACH_TYPE_CP5                  4787
+#define MACH_TYPE_FORNAX               4788
+#define MACH_TYPE_ICU                  4789
+#define MACH_TYPE_COMUS3               4790
+#define MACH_TYPE_LIBRA4344            4791
+#define MACH_TYPE_LIBRA4644            4792
+#define MACH_TYPE_PAVO                 4793
+#define MACH_TYPE_XL824                4794
+#define MACH_TYPE_XL850                4795
+#define MACH_TYPE_MX6_PICO_ITX         4796
+#define MACH_TYPE_AMICO_S              4797
+#define MACH_TYPE_AMICO_P              4798
+#define MACH_TYPE_MINNOW               4799
+#define MACH_TYPE_DAVINCI_DM365_ZY     4800
+#define MACH_TYPE_PAVO_2               4801
+#define MACH_TYPE_IAVS                 4802
+#define MACH_TYPE_RANA                 4803
+#define MACH_TYPE_MERAKI_MS26          4804
+#define MACH_TYPE_VP2_REFRESH          4805
+#define MACH_TYPE_MCB1800              4806
+#define MACH_TYPE_MX6Q_DEVONIT_TC3     4807
+#define MACH_TYPE_UC81XX               4808
+#define MACH_TYPE_UC84XX               4809
+#define MACH_TYPE_IPQ806X_AP145        4810
+#define MACH_TYPE_IPQ806X_DB149_MMC    4811
+#define MACH_TYPE_IPQ806X_AP145_MMC    4812
+#define MACH_TYPE_E3QT                 4813
+#define MACH_TYPE_U222                 4814
+#define MACH_TYPE_UFO878               4815
+#define MACH_TYPE_GEKKO                4816
+#define MACH_TYPE_MINI2440ARM          4817
+#define MACH_TYPE_MPCSB2_9G20          4818
+#define MACH_TYPE_TL7689_PAD_706       4819
+#define MACH_TYPE_TDA7                 4820
+#define MACH_TYPE_CUBOXI               4821
+#define MACH_TYPE_TIBIDABO             4822
+#define MACH_TYPE_T216MINI             4823
+#define MACH_TYPE_HERA_IMX6            4824
+#define MACH_TYPE_GRIDPOINT_EC1K       4825
+#define MACH_TYPE_LIBRA4404            4826
+#define MACH_TYPE_MI_MOCHA             4827
+#define MACH_TYPE_BCM2835              4828
+#define MACH_TYPE_NFP6XXX              4829
+#define MACH_TYPE_TETRA                4830
+#define MACH_TYPE_NECO                 4831
+#define MACH_TYPE_PROTONEX_VPM402      4832
+#define MACH_TYPE_MX6Q_SAVAGE          4833
+#define MACH_TYPE_MX6Q_SOMB            4834
+#define MACH_TYPE_FILI_DL              4835
+#define MACH_TYPE_ADAPT_SDRDC          4836
+#define MACH_TYPE_DS_QUARTZ            4837
+#define MACH_TYPE_ULTRAFLEX            4838
+#define MACH_TYPE_APQ8064_ADP_2        4839
+#define MACH_TYPE_BEAN                 4840
+#define MACH_TYPE_BALDR                4841
+#define MACH_TYPE_CCIMX6ADPT           4842
+#define MACH_TYPE_TS4900               4843
+#define MACH_TYPE_ZEPLUG               4844
+#define MACH_TYPE_MSM8X60_DUPLICITY    4845
+#define MACH_TYPE_CTERA_2BAY_A         4846
+#define MACH_TYPE_AM335X_BAP_V3_1      4847
+#define MACH_TYPE_XPECT01              4848
+#define MACH_TYPE_ESI23                4849
+#define MACH_TYPE_MX6DL_SBC35_C398     4850
+#define MACH_TYPE_MX6SOLO_SBC35_C398   4851
+#define MACH_TYPE_KSP5012              4852
+#define MACH_TYPE_MX6Q_ZEUS            4853
+#define MACH_TYPE_INNOVA_MATRIX        4854
+#define MACH_TYPE_RF6XXR               4855
+#define MACH_TYPE_PECORINO             4856
+#define MACH_TYPE_MHPLAY_W             4857
+#define MACH_TYPE_PELCO_DRAGONFLY      4858
+#define MACH_TYPE_VSM_CHAMHIGH         4859
+#define MACH_TYPE_HACHIKO              4860
+#define MACH_TYPE_TL7689_PHONE_IN260   4861
+#define MACH_TYPE_CWMX6                4862
+#define MACH_TYPE_HD3                  4863
+#define MACH_TYPE_UHD4                 4864
+#define MACH_TYPE_BULPRINT_BOARD       4865
+#define MACH_TYPE_PELCO_SPECTRAHD2     4866
+#define MACH_TYPE_VISTEONV2X           4867
+#define MACH_TYPE_PHIDGET_VINTSBC      4868
+#define MACH_TYPE_LMU7030              4869
+#define MACH_TYPE_ECC2                 4870
+#define MACH_TYPE_CDS_CTS              4871
+#define MACH_TYPE_AXELLITE             4872
+#define MACH_TYPE_ARNIE                4873
+#define MACH_TYPE_AGATEWAY             4874
+#define MACH_TYPE_PICOMODA9            4875
+#define MACH_TYPE_P_137_I6             4876
+#define MACH_TYPE_VVDN_MCAM            4877
+#define MACH_TYPE_MX6_INSIGHT          4878
+#define MACH_TYPE_VIPRINET_200         4879
+#define MACH_TYPE_ELLYPTO              4880
+#define MACH_TYPE_G7P                  4881
+#define MACH_TYPE_YSE5250              4882
+#define MACH_TYPE_NG500                4883
+#define MACH_TYPE_DTSC02               4884
+#define MACH_TYPE_MX6DL_SBB            4885
+#define MACH_TYPE_APALIS_IMX6Q         4886
+#define MACH_TYPE_WOMBAT6              4887
+#define MACH_TYPE_BALTO                4888
+#define MACH_TYPE_TNGSBL               4889
+#define MACH_TYPE_H6061                4890
+#define MACH_TYPE_XA300                4891
+#define MACH_TYPE_PELCO_WOOFF          4892
+#define MACH_TYPE_PELCO_EVM            4893
+#define MACH_TYPE_MX6Q_IMXB            4894
+#define MACH_TYPE_SMARTTAB_V55         4895
+#define MACH_TYPE_SMARTTAB_V11A        4896
+#define MACH_TYPE_SMARTTAB_V71A        4897
+#define MACH_TYPE_NOVASOM5             4898
+#define MACH_TYPE_CCIMX6SBC            4899
+#define MACH_TYPE_INTOUCH              4900
+#define MACH_TYPE_MX6S_HAWTHORNE       4901
+#define MACH_TYPE_SEAH                 4902
+#define MACH_TYPE_AM335X_EC3           4903
+#define MACH_TYPE_EMBEST_MARS          4904
+#define MACH_TYPE_MX6DL_VIKITOUCH      4905
+#define MACH_TYPE_IX2_NG               4906
+#define MACH_TYPE_PEKQSD               4907
+#define MACH_TYPE_PTEKN                4908
+#define MACH_TYPE_APQ8064_ADP2_ES2     4909
+#define MACH_TYPE_GHIIMX6              4910
+#define MACH_TYPE_M3000                4911
+#define MACH_TYPE_TCW101               4912
+#define MACH_TYPE_IPQ806X_AP148_1XX    4913
+#define MACH_TYPE_HNS_ACADIA           4914
+#define MACH_TYPE_MX6S_VIKITOUCH       4915
+#define MACH_TYPE_CM_QS600             4916
+#define MACH_TYPE_IPQ806X_DB149_2XX    4917
+#define MACH_TYPE_EAG_UGW400           4918
+#define MACH_TYPE_SK_GRANT_OEM         4919
+#define MACH_TYPE_KNOBLOCH_TXT         4920
+#define MACH_TYPE_MX6SL_SHD            4921
+#define MACH_TYPE_HIMX0294             4922
+#define MACH_TYPE_MX6Q_TTJ500          4923
+#define MACH_TYPE_CONTI_SGM358         4924
+#define MACH_TYPE_DENSOJ6REF           4925
+#define MACH_TYPE_KEVIN                4926
+#define MACH_TYPE_VVDN_TOII            4927
+#define MACH_TYPE_PENGWYN              4928
+#define MACH_TYPE_XARINA_ENTRY         4929
+#define MACH_TYPE_CONTI_MRNEVO         4930
+#define MACH_TYPE_NSA310S              4931
+#define MACH_TYPE_POWERECU             4932
+#define MACH_TYPE_Q7M120               4933
+#define MACH_TYPE_H6829                4934
+#define MACH_TYPE_AG13008              4935
+#define MACH_TYPE_IPQ806X_STORM        4936
+#define MACH_TYPE_DM3725_GSOM          4937
+#define MACH_TYPE_HP_PRIME             4938
+#define MACH_TYPE_FIRESTORM            4939
+#define MACH_TYPE_WINGZ                4940
+#define MACH_TYPE_ANDROMED             4941
+#define MACH_TYPE_SCM120               4942
+#define MACH_TYPE_CM_3G                4943
+#define MACH_TYPE_IPA400               4944
+#define MACH_TYPE_HYDRA_MKII           4945
+#define MACH_TYPE_AXM2                 4946
+#define MACH_TYPE_CALOPUS              4947
+#define MACH_TYPE_BCTRM3S              4948
+#define MACH_TYPE_DM385LB              4949
+#define MACH_TYPE_SURMA_MKII           4950
+#define MACH_TYPE_OMAP4_SKHU_HCAM      4951
+#define MACH_TYPE_SCMCON               4952
+#define MACH_TYPE_KLK_IMX6S_G          4953
+#define MACH_TYPE_AM335XMX             4954
+#define MACH_TYPE_DMVA2_BTFU_WCAM      4955
+#define MACH_TYPE_UXC                  4956
+#define MACH_TYPE_ELARM_A              4957
+#define MACH_TYPE_EMPC_AIMX6           4958
+#define MACH_TYPE_BCTRE2G2             4959
+#define MACH_TYPE_DMD                  4960
+#define MACH_TYPE_DISCOVERY            4961
+#define MACH_TYPE_RELIAGATE_10_20      4962
+#define MACH_TYPE_MX6Q_DSA2LS          4963
+#define MACH_TYPE_MX6SL_ECT5           4964
+#define MACH_TYPE_COBHAM_MDC3          4965
+#define MACH_TYPE_TS_WAV               4966
+#define MACH_TYPE_XIN_GIGE_CAM         4967
+#define MACH_TYPE_ASAIIOTG             4968
+#define MACH_TYPE_DAU                  4969
+#define MACH_TYPE_SOCFPGA_ARRIA5       4970
+#define MACH_TYPE_IPQ806X_AP160        4971
+#define MACH_TYPE_IPQ806X_AP161        4972
+#define MACH_TYPE_GEMX6                4973
+#define MACH_TYPE_EFUSA9               4974
+#define MACH_TYPE_DYNACOR_10_20        4975
+#define MACH_TYPE_BLUELIGHTNING        4976
+#define MACH_TYPE_SILVERBULLET         4977
+#define MACH_TYPE_MX6_MAEXLE           4978
+#define MACH_TYPE_PAYTEC_EPT           4979
+#define MACH_TYPE_ATLASCOPCO_ITMK2     4980
+#define MACH_TYPE_ATLASCOPCO_FLEXDRV   4981
+#define MACH_TYPE_ATLASCOPCO_FLEXIT    4982
+#define MACH_TYPE_PCDON                4983
+#define MACH_TYPE_DM8168_IWG12M_Q7     4984
+#define MACH_TYPE_RTM9431              4985
+#define MACH_TYPE_ARM11_CAR            4986
+#define MACH_TYPE_VIDEOPHONE           4987
+#define MACH_TYPE_MPFA                 4988
+#define MACH_TYPE_PS10                 4989
+#define MACH_TYPE_HGATEWAY             4990
+#define MACH_TYPE_IPQ806X_AP160_2      4991
+#define MACH_TYPE_ECP5COM              4992
+#define MACH_TYPE_H6064                4993
+#define MACH_TYPE_MX6X_MX              4994
+#define MACH_TYPE_MAJIC5422            4995
+#define MACH_TYPE_EMINDS               4996
+#define MACH_TYPE_TI8168TOII           4997
+#define MACH_TYPE_VXR10                4998
+#define MACH_TYPE_DS5                  4999
+#define MACH_TYPE_DS3                  5000
+#define MACH_TYPE_NOKIAN97             5001
+#define MACH_TYPE_TECNINT_ODBC         5002
+#define MACH_TYPE_C111                 5003
+#define MACH_TYPE_ML300DU              5004
+#define MACH_TYPE_YAK                  5005
+#define MACH_TYPE_NSA221               5006
+#define MACH_TYPE_GINKGOP              5007
+#define MACH_TYPE_MANGO                5008
+#define MACH_TYPE_AMBS2E               5009
+#define MACH_TYPE_AMBS3L               5010
+#define MACH_TYPE_DRA7XX_EVM           5011
+#define MACH_TYPE_DENSODRA74XMID       5012
+#define MACH_TYPE_MILD                 5013
+#define MACH_TYPE_YLCM_MK2             5014
+#define MACH_TYPE_DS_CB                5015
+#define MACH_TYPE_EMPEROR              5016
+#define MACH_TYPE_ARTPEC               5017
+#define MACH_TYPE_DCIM                 5018
+#define MACH_TYPE_WS1XX                5019
+#define MACH_TYPE_IPQ806X_AK01_1XX     5020
+#define MACH_TYPE_MGWACE_DEC           5021
+#define MACH_TYPE_W6000                5022
+#define MACH_TYPE_WATSON_FIB_PLUGIN    5023
+#define MACH_TYPE_MX6Q_TINYREX         5024
+#define MACH_TYPE_MX6S_TINYREX         5025
+#define MACH_TYPE_MX6Q_MODEROS         5026
+#define MACH_TYPE_AFI                  5027
+#define MACH_TYPE_RCPRO                5028
+#define MACH_TYPE_ONBOX                5029
+#define MACH_TYPE_EXYNOS4412           5030
+#define MACH_TYPE_EXYNOS4413           5031
+#define MACH_TYPE_PELCO_DF20_EVT       5032
+#define MACH_TYPE_LION_DUG             5033
+#define MACH_TYPE_LIONP_DUG            5034
+#define MACH_TYPE_ESSE                 5035
+#define MACH_TYPE_ILLINOIS             5036
+#define MACH_TYPE_TI8168KSIPOLARIS     5037
+#define MACH_TYPE_YSE_BOARD            5038
+#define MACH_TYPE_PELCO_HWE0_EVT       5039
+#define MACH_TYPE_PELCO_S2E_EVM        5040
+#define MACH_TYPE_PELCO_DRAGONFLY20    5041
+#define MACH_TYPE_PELCO_HAWKEYE        5042
+#define MACH_TYPE_ARM                  5043
+#define MACH_TYPE_TCAM                 5044
+#define MACH_TYPE_MX6Q_HOBBY           5045
+#define MACH_TYPE_H6067                5046
+#define MACH_TYPE_DENSODRA72XLOW       5047
+#define MACH_TYPE_MX6_UNETBIT          5048
+#define MACH_TYPE_BT_OAK               5049
+#define MACH_TYPE_BT500                5050
+#define MACH_TYPE_FARWATER_GEO         5051
+#define MACH_TYPE_YT2                  5052
+#define MACH_TYPE_EH9000               5053
+#define MACH_TYPE_GVPU                 5054
+#define MACH_TYPE_CEDEX                5055
+#define MACH_TYPE_NT450R5G             5056
+#define MACH_TYPE_MSA23XX              5057
+#define MACH_TYPE_OMAP3_MOSS           5058
+#define MACH_TYPE_KYEONGHAWOO          5059
+#define MACH_TYPE_GIRA_IM03            5060
+#define MACH_TYPE_EUROFUNK_AIIF        5061
+#define MACH_TYPE_BCU1                 5062
+#define MACH_TYPE_DIYEFIS6410          5063
+#define MACH_TYPE_MX53_TURING          5064
+#define MACH_TYPE_MX6X_TURING          5065
+#define MACH_TYPE_MX6DL_TURING         5066
+#define MACH_TYPE_MX53_INDASH          5067
+#define MACH_TYPE_MX6Q_INDASH          5068
+#define MACH_TYPE_MX6DL_INDASH         5069
+#define MACH_TYPE_RTS_G6               5070
+#define MACH_TYPE_KA_TITAN             5071
+#define MACH_TYPE_CL_SOM_IMX7          5072
+#define MACH_TYPE_VVDN_MGSI_VSIS       5073
+#define MACH_TYPE_MX6Q_NANO            5074
+#define MACH_TYPE_PDU001               5075
+#define MACH_TYPE_CAB_PROYK            5076
+#define MACH_TYPE_KLIN                 5077
+#define MACH_TYPE_ENMAN_STEUERBOX      5078
+#define MACH_TYPE_LS_STINGRAY          5079
+#define MACH_TYPE_IPDU                 5080
+#define MACH_TYPE_LINDA                5081
+#define MACH_TYPE_MX6Q_OPENREX         5082
+#define MACH_TYPE_ON100                5083
+#define MACH_TYPE_EMINDS_RTU12         5084
+#define MACH_TYPE_EMINDS_AVL10         5085
+#define MACH_TYPE_MAIN_PLC_LME         5086
+#define MACH_TYPE_MSPX                 5087
+#define MACH_TYPE_CGW_300              5088
+#define MACH_TYPE_MX7D_CICADA          5089
+#define MACH_TYPE_VIRT2REAL_DM365      5090
+#define MACH_TYPE_DM365_VIRT2REAL      5091
+#define MACH_TYPE_H6073                5092
+#define MACH_TYPE_GTGATEWAY            5093
+#define MACH_TYPE_XARINA_STANDARD      5094
+#define MACH_TYPE_NOVASOMS             5095
+#define MACH_TYPE_NOVASOMP             5096
+#define MACH_TYPE_NOVASOMU             5097
+#define MACH_TYPE_MX6Q_MPBD            5098
+#define MACH_TYPE_NCR_1930             5099
+#define MACH_TYPE_UAP301               5100
+#define MACH_TYPE_URT02                5101
+#define MACH_TYPE_ATC8                 5102
+#define MACH_TYPE_IOT_GATEWAY          5103
+#define MACH_TYPE_HSM_PHOENIX          5104
+#define MACH_TYPE_MISSOURI             5105
+#define MACH_TYPE_REMARKABLE           5106
+#define MACH_TYPE_FA0113               5107
+#define MACH_TYPE_INNOVA_STATNETTAWM   5108
+#define MACH_TYPE_TEGRA3               5109
+#define MACH_TYPE_MALI400              5110
+#define MACH_TYPE_MALI450              5111
+#define MACH_TYPE_NASM25               5112
+#define MACH_TYPE_TOMATO               5113
+#define MACH_TYPE_OMAP3_MRC3D          5114
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/macro.h b/roms/u-boot/arch/arm/include/asm/macro.h
new file mode 100644
index 000000000..bb33b4bc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/macro.h
@@ -0,0 +1,337 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * include/asm-arm/macro.h
+ *
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#ifndef __ASM_ARM_MACRO_H__
+#define __ASM_ARM_MACRO_H__
+
+#ifdef CONFIG_ARM64
+#include <asm/system.h>
+#endif
+
+#ifdef __ASSEMBLY__
+
+/*
+ * These macros provide a convenient way to write 8, 16 and 32 bit data
+ * to any address.
+ * Registers r4 and r5 are used, any data in these registers are
+ * overwritten by the macros.
+ * The macros are valid for any ARM architecture, they do not implement
+ * any memory barriers so caution is recommended when using these when the
+ * caches are enabled or on a multi-core system.
+ */
+
+.macro	write32, addr, data
+	ldr	r4, =\addr
+	ldr	r5, =\data
+	str	r5, [r4]
+.endm
+
+.macro	write16, addr, data
+	ldr	r4, =\addr
+	ldrh	r5, =\data
+	strh	r5, [r4]
+.endm
+
+.macro	write8, addr, data
+	ldr	r4, =\addr
+	ldrb	r5, =\data
+	strb	r5, [r4]
+.endm
+
+/*
+ * This macro generates a loop that can be used for delays in the code.
+ * Register r4 is used, any data in this register is overwritten by the
+ * macro.
+ * The macro is valid for any ARM architeture. The actual time spent in the
+ * loop will vary from CPU to CPU though.
+ */
+
+.macro	wait_timer, time
+	ldr	r4, =\time
+1:
+	nop
+	subs	r4, r4, #1
+	bcs	1b
+.endm
+
+#ifdef CONFIG_ARM64
+/*
+ * Register aliases.
+ */
+lr	.req	x30
+
+/*
+ * Branch according to exception level
+ */
+.macro	switch_el, xreg, el3_label, el2_label, el1_label
+	mrs	\xreg, CurrentEL
+	cmp	\xreg, 0xc
+	b.eq	\el3_label
+	cmp	\xreg, 0x8
+	b.eq	\el2_label
+	cmp	\xreg, 0x4
+	b.eq	\el1_label
+.endm
+
+/*
+ * Branch if current processor is a Cortex-A57 core.
+ */
+.macro	branch_if_a57_core, xreg, a57_label
+	mrs	\xreg, midr_el1
+	lsr	\xreg, \xreg, #4
+	and	\xreg, \xreg, #0x00000FFF
+	cmp	\xreg, #0xD07		/* Cortex-A57 MPCore processor. */
+	b.eq	\a57_label
+.endm
+
+/*
+ * Branch if current processor is a Cortex-A53 core.
+ */
+.macro	branch_if_a53_core, xreg, a53_label
+	mrs	\xreg, midr_el1
+	lsr	\xreg, \xreg, #4
+	and	\xreg, \xreg, #0x00000FFF
+	cmp	\xreg, #0xD03		/* Cortex-A53 MPCore processor. */
+	b.eq	\a53_label
+.endm
+
+/*
+ * Branch if current processor is a slave,
+ * choose processor with all zero affinity value as the master.
+ */
+.macro	branch_if_slave, xreg, slave_label
+#ifdef CONFIG_ARMV8_MULTIENTRY
+	/* NOTE: MPIDR handling will be erroneous on multi-cluster machines */
+	mrs	\xreg, mpidr_el1
+	tst	\xreg, #0xff		/* Test Affinity 0 */
+	b.ne	\slave_label
+	lsr	\xreg, \xreg, #8
+	tst	\xreg, #0xff		/* Test Affinity 1 */
+	b.ne	\slave_label
+	lsr	\xreg, \xreg, #8
+	tst	\xreg, #0xff		/* Test Affinity 2 */
+	b.ne	\slave_label
+	lsr	\xreg, \xreg, #16
+	tst	\xreg, #0xff		/* Test Affinity 3 */
+	b.ne	\slave_label
+#endif
+.endm
+
+/*
+ * Branch if current processor is a master,
+ * choose processor with all zero affinity value as the master.
+ */
+.macro	branch_if_master, xreg1, xreg2, master_label
+#ifdef CONFIG_ARMV8_MULTIENTRY
+	/* NOTE: MPIDR handling will be erroneous on multi-cluster machines */
+	mrs	\xreg1, mpidr_el1
+	lsr	\xreg2, \xreg1, #32
+	lsl	\xreg2, \xreg2, #32
+	lsl	\xreg1, \xreg1, #40
+	lsr	\xreg1, \xreg1, #40
+	orr	\xreg1, \xreg1, \xreg2
+	cbz	\xreg1, \master_label
+#else
+	b 	\master_label
+#endif
+.endm
+
+/*
+ * Switch from EL3 to EL2 for ARMv8
+ * @ep:     kernel entry point
+ * @flag:   The execution state flag for lower exception
+ *          level, ES_TO_AARCH64 or ES_TO_AARCH32
+ * @tmp:    temporary register
+ *
+ * For loading 32-bit OS, x1 is machine nr and x2 is ftaddr.
+ * For loading 64-bit OS, x0 is physical address to the FDT blob.
+ * They will be passed to the guest.
+ */
+.macro armv8_switch_to_el2_m, ep, flag, tmp
+	msr	cptr_el3, xzr		/* Disable coprocessor traps to EL3 */
+	mov	\tmp, #CPTR_EL2_RES1
+	msr	cptr_el2, \tmp		/* Disable coprocessor traps to EL2 */
+
+	/* Initialize Generic Timers */
+	msr	cntvoff_el2, xzr
+
+	/* Initialize SCTLR_EL2
+	 *
+	 * setting RES1 bits (29,28,23,22,18,16,11,5,4) to 1
+	 * and RES0 bits (31,30,27,26,24,21,20,17,15-13,10-6) +
+	 * EE,WXN,I,SA,C,A,M to 0
+	 */
+	ldr	\tmp, =(SCTLR_EL2_RES1 | SCTLR_EL2_EE_LE |\
+			SCTLR_EL2_WXN_DIS | SCTLR_EL2_ICACHE_DIS |\
+			SCTLR_EL2_SA_DIS | SCTLR_EL2_DCACHE_DIS |\
+			SCTLR_EL2_ALIGN_DIS | SCTLR_EL2_MMU_DIS)
+	msr	sctlr_el2, \tmp
+
+	mov	\tmp, sp
+	msr	sp_el2, \tmp		/* Migrate SP */
+	mrs	\tmp, vbar_el3
+	msr	vbar_el2, \tmp		/* Migrate VBAR */
+
+	/* Check switch to AArch64 EL2 or AArch32 Hypervisor mode */
+	cmp	\flag, #ES_TO_AARCH32
+	b.eq	1f
+
+	/*
+	 * The next lower exception level is AArch64, 64bit EL2 | HCE |
+	 * RES1 (Bits[5:4]) | Non-secure EL0/EL1.
+	 * and the SMD depends on requirements.
+	 */
+#ifdef CONFIG_ARMV8_PSCI
+	ldr	\tmp, =(SCR_EL3_RW_AARCH64 | SCR_EL3_HCE_EN |\
+			SCR_EL3_RES1 | SCR_EL3_NS_EN)
+#else
+	ldr	\tmp, =(SCR_EL3_RW_AARCH64 | SCR_EL3_HCE_EN |\
+			SCR_EL3_SMD_DIS | SCR_EL3_RES1 |\
+			SCR_EL3_NS_EN)
+#endif
+
+#ifdef CONFIG_ARMV8_EA_EL3_FIRST
+	orr	\tmp, \tmp, #SCR_EL3_EA_EN
+#endif
+	msr	scr_el3, \tmp
+
+	/* Return to the EL2_SP2 mode from EL3 */
+	ldr	\tmp, =(SPSR_EL_DEBUG_MASK | SPSR_EL_SERR_MASK |\
+			SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+			SPSR_EL_M_AARCH64 | SPSR_EL_M_EL2H)
+	msr	spsr_el3, \tmp
+	msr	elr_el3, \ep
+	eret
+
+1:
+	/*
+	 * The next lower exception level is AArch32, 32bit EL2 | HCE |
+	 * SMD | RES1 (Bits[5:4]) | Non-secure EL0/EL1.
+	 */
+	ldr	\tmp, =(SCR_EL3_RW_AARCH32 | SCR_EL3_HCE_EN |\
+			SCR_EL3_SMD_DIS | SCR_EL3_RES1 |\
+			SCR_EL3_NS_EN)
+	msr	scr_el3, \tmp
+
+	/* Return to AArch32 Hypervisor mode */
+	ldr     \tmp, =(SPSR_EL_END_LE | SPSR_EL_ASYN_MASK |\
+			SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+			SPSR_EL_T_A32 | SPSR_EL_M_AARCH32 |\
+			SPSR_EL_M_HYP)
+	msr	spsr_el3, \tmp
+	msr     elr_el3, \ep
+	eret
+.endm
+
+/*
+ * Switch from EL2 to EL1 for ARMv8
+ * @ep:     kernel entry point
+ * @flag:   The execution state flag for lower exception
+ *          level, ES_TO_AARCH64 or ES_TO_AARCH32
+ * @tmp:    temporary register
+ *
+ * For loading 32-bit OS, x1 is machine nr and x2 is ftaddr.
+ * For loading 64-bit OS, x0 is physical address to the FDT blob.
+ * They will be passed to the guest.
+ */
+.macro armv8_switch_to_el1_m, ep, flag, tmp
+	/* Initialize Generic Timers */
+	mrs	\tmp, cnthctl_el2
+	/* Enable EL1 access to timers */
+	orr	\tmp, \tmp, #(CNTHCTL_EL2_EL1PCEN_EN |\
+		CNTHCTL_EL2_EL1PCTEN_EN)
+	msr	cnthctl_el2, \tmp
+	msr	cntvoff_el2, xzr
+
+	/* Initilize MPID/MPIDR registers */
+	mrs	\tmp, midr_el1
+	msr	vpidr_el2, \tmp
+	mrs	\tmp, mpidr_el1
+	msr	vmpidr_el2, \tmp
+
+	/* Disable coprocessor traps */
+	mov	\tmp, #CPTR_EL2_RES1
+	msr	cptr_el2, \tmp		/* Disable coprocessor traps to EL2 */
+	msr	hstr_el2, xzr		/* Disable coprocessor traps to EL2 */
+	mov	\tmp, #CPACR_EL1_FPEN_EN
+	msr	cpacr_el1, \tmp		/* Enable FP/SIMD at EL1 */
+
+	/* SCTLR_EL1 initialization
+	 *
+	 * setting RES1 bits (29,28,23,22,20,11) to 1
+	 * and RES0 bits (31,30,27,21,17,13,10,6) +
+	 * UCI,EE,EOE,WXN,nTWE,nTWI,UCT,DZE,I,UMA,SED,ITD,
+	 * CP15BEN,SA0,SA,C,A,M to 0
+	 */
+	ldr	\tmp, =(SCTLR_EL1_RES1 | SCTLR_EL1_UCI_DIS |\
+			SCTLR_EL1_EE_LE | SCTLR_EL1_WXN_DIS |\
+			SCTLR_EL1_NTWE_DIS | SCTLR_EL1_NTWI_DIS |\
+			SCTLR_EL1_UCT_DIS | SCTLR_EL1_DZE_DIS |\
+			SCTLR_EL1_ICACHE_DIS | SCTLR_EL1_UMA_DIS |\
+			SCTLR_EL1_SED_EN | SCTLR_EL1_ITD_EN |\
+			SCTLR_EL1_CP15BEN_DIS | SCTLR_EL1_SA0_DIS |\
+			SCTLR_EL1_SA_DIS | SCTLR_EL1_DCACHE_DIS |\
+			SCTLR_EL1_ALIGN_DIS | SCTLR_EL1_MMU_DIS)
+	msr	sctlr_el1, \tmp
+
+	mov	\tmp, sp
+	msr	sp_el1, \tmp		/* Migrate SP */
+	mrs	\tmp, vbar_el2
+	msr	vbar_el1, \tmp		/* Migrate VBAR */
+
+	/* Check switch to AArch64 EL1 or AArch32 Supervisor mode */
+	cmp	\flag, #ES_TO_AARCH32
+	b.eq	1f
+
+	/* Initialize HCR_EL2 */
+	ldr	\tmp, =(HCR_EL2_RW_AARCH64 | HCR_EL2_HCD_DIS)
+	msr	hcr_el2, \tmp
+
+	/* Return to the EL1_SP1 mode from EL2 */
+	ldr	\tmp, =(SPSR_EL_DEBUG_MASK | SPSR_EL_SERR_MASK |\
+			SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+			SPSR_EL_M_AARCH64 | SPSR_EL_M_EL1H)
+	msr	spsr_el2, \tmp
+	msr     elr_el2, \ep
+	eret
+
+1:
+	/* Initialize HCR_EL2 */
+	ldr	\tmp, =(HCR_EL2_RW_AARCH32 | HCR_EL2_HCD_DIS)
+	msr	hcr_el2, \tmp
+
+	/* Return to AArch32 Supervisor mode from EL2 */
+	ldr	\tmp, =(SPSR_EL_END_LE | SPSR_EL_ASYN_MASK |\
+			SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+			SPSR_EL_T_A32 | SPSR_EL_M_AARCH32 |\
+			SPSR_EL_M_SVC)
+	msr     spsr_el2, \tmp
+	msr     elr_el2, \ep
+	eret
+.endm
+
+#if defined(CONFIG_GICV3)
+.macro gic_wait_for_interrupt_m xreg1
+0 :	wfi
+	mrs     \xreg1, ICC_IAR1_EL1
+	msr     ICC_EOIR1_EL1, \xreg1
+	cbnz    \xreg1, 0b
+.endm
+#elif defined(CONFIG_GICV2)
+.macro gic_wait_for_interrupt_m xreg1, wreg2
+0 :	wfi
+	ldr     \wreg2, [\xreg1, GICC_AIAR]
+	str     \wreg2, [\xreg1, GICC_AEOIR]
+	and	\wreg2, \wreg2, #0x3ff
+	cbnz    \wreg2, 0b
+.endm
+#endif
+
+#endif /* CONFIG_ARM64 */
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARM_MACRO_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/memory.h b/roms/u-boot/arch/arm/include/asm/memory.h
new file mode 100644
index 000000000..6b460786e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/memory.h
@@ -0,0 +1,136 @@
+/*
+ *  linux/include/asm-arm/memory.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_ARM_MEMORY_H
+#define __ASM_ARM_MEMORY_H
+
+#if 0	/* XXX###XXX */
+
+#include <asm/arch/memory.h>
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * These are *only* valid on the kernel direct mapped RAM memory.
+ */
+static inline unsigned long virt_to_phys(void *x)
+{
+	return __virt_to_phys((unsigned long)(x));
+}
+
+static inline void *phys_to_virt(unsigned long x)
+{
+	return (void *)(__phys_to_virt((unsigned long)(x)));
+}
+
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
+
+/*
+ * Virtual <-> DMA view memory address translations
+ * Again, these are *only* valid on the kernel direct mapped RAM
+ * memory.  Use of these is *deprecated*.
+ */
+#define virt_to_bus(x)		(__virt_to_bus((unsigned long)(x)))
+#define bus_to_virt(x)		((void *)(__bus_to_virt((unsigned long)(x))))
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE().  It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ *  page_to_pfn(page)	convert a struct page * to a PFN number
+ *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
+ *  pfn_valid(pfn)	indicates whether a PFN number is valid
+ *
+ *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(k)	indicates whether a virtual address is valid
+ */
+#ifndef CONFIG_DISCONTIGMEM
+
+#define page_to_pfn(page)	(((page) - mem_map) + PHYS_PFN_OFFSET)
+#define pfn_to_page(pfn)	((mem_map + (pfn)) - PHYS_PFN_OFFSET)
+#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+
+#define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+#define virt_addr_valid(kaddr)	((kaddr) >= PAGE_OFFSET && (kaddr) < (unsigned long)high_memory)
+
+#define PHYS_TO_NID(addr)	(0)
+
+#define VALID_PAGE(page)	((page - mem_map) < max_mapnr)
+
+#else
+
+/*
+ * This is more complex.  We have a set of mem_map arrays spread
+ * around in memory.
+ */
+#define page_to_pfn(page)					\
+	(((page) - page_zone(page)->zone_mem_map)		\
+	  + (page_zone(page)->zone_start_paddr >> PAGE_SHIFT))
+
+#define pfn_to_page(pfn)					\
+	(PFN_TO_MAPBASE(pfn) + LOCAL_MAP_NR((pfn) << PAGE_SHIFT))
+
+#define pfn_valid(pfn)						\
+  ({								\
+	unsigned int node = PFN_TO_NID(pfn);			\
+	struct pglist_data *nd = NODE_DATA(node);		\
+	((node < NR_NODES) &&					\
+	 ((pfn - (nd->node_start_paddr >> PAGE_SHIFT)) < nd->node_size));\
+   })
+
+#define virt_to_page(kaddr)					\
+	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
+
+#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < NR_NODES)
+
+/*
+ * Common discontigmem stuff.
+ *  PHYS_TO_NID is used by the ARM kernel/setup.c
+ */
+#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
+
+/*
+ * 2.4 compatibility
+ *
+ * VALID_PAGE returns a non-zero value if given page pointer is valid.
+ * This assumes all node's mem_maps are stored within the node they
+ * refer to.  This is actually inherently buggy.
+ */
+#define VALID_PAGE(page) \
+({ unsigned int node = KVADDR_TO_NID(page); \
+   ((node < NR_NODES) && \
+     ((unsigned)((page) - NODE_MEM_MAP(node)) < NODE_DATA(node)->node_size)); \
+})
+
+#endif
+
+/*
+ * We should really eliminate virt_to_bus() here - it's deprecated.
+ */
+#define page_to_bus(page)	(virt_to_bus(page_address(page)))
+
+#endif	/* XXX###XXX */
+
+#endif	/* __ASM_ARM_MEMORY_H */
diff --git a/roms/u-boot/arch/arm/include/asm/mmu.h b/roms/u-boot/arch/arm/include/asm/mmu.h
new file mode 100644
index 000000000..9ac16f599
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/mmu.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __ASM_ARM_MMU_H
+#define __ASM_ARM_MMU_H
+
+void init_addr_map(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/omap_common.h b/roms/u-boot/arch/arm/include/asm/omap_common.h
new file mode 100644
index 000000000..de8fc99d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/omap_common.h
@@ -0,0 +1,838 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ */
+#ifndef	_OMAP_COMMON_H_
+#define	_OMAP_COMMON_H_
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+#define NUM_SYS_CLKS	7
+
+struct bd_info;
+
+struct prcm_regs {
+	/* cm1.ckgen */
+	u32 cm_clksel_core;
+	u32 cm_clksel_abe;
+	u32 cm_dll_ctrl;
+	u32 cm_clkmode_dpll_core;
+	u32 cm_idlest_dpll_core;
+	u32 cm_autoidle_dpll_core;
+	u32 cm_clksel_dpll_core;
+	u32 cm_div_m2_dpll_core;
+	u32 cm_div_m3_dpll_core;
+	u32 cm_div_h11_dpll_core;
+	u32 cm_div_h12_dpll_core;
+	u32 cm_div_h13_dpll_core;
+	u32 cm_div_h14_dpll_core;
+	u32 cm_div_h21_dpll_core;
+	u32 cm_div_h24_dpll_core;
+	u32 cm_ssc_deltamstep_dpll_core;
+	u32 cm_ssc_modfreqdiv_dpll_core;
+	u32 cm_emu_override_dpll_core;
+	u32 cm_div_h22_dpllcore;
+	u32 cm_div_h23_dpll_core;
+	u32 cm_clkmode_dpll_mpu;
+	u32 cm_idlest_dpll_mpu;
+	u32 cm_autoidle_dpll_mpu;
+	u32 cm_clksel_dpll_mpu;
+	u32 cm_div_m2_dpll_mpu;
+	u32 cm_ssc_deltamstep_dpll_mpu;
+	u32 cm_ssc_modfreqdiv_dpll_mpu;
+	u32 cm_bypclk_dpll_mpu;
+	u32 cm_clkmode_dpll_iva;
+	u32 cm_idlest_dpll_iva;
+	u32 cm_autoidle_dpll_iva;
+	u32 cm_clksel_dpll_iva;
+	u32 cm_div_h11_dpll_iva;
+	u32 cm_div_h12_dpll_iva;
+	u32 cm_ssc_deltamstep_dpll_iva;
+	u32 cm_ssc_modfreqdiv_dpll_iva;
+	u32 cm_bypclk_dpll_iva;
+	u32 cm_clkmode_dpll_abe;
+	u32 cm_idlest_dpll_abe;
+	u32 cm_autoidle_dpll_abe;
+	u32 cm_clksel_dpll_abe;
+	u32 cm_div_m2_dpll_abe;
+	u32 cm_div_m3_dpll_abe;
+	u32 cm_ssc_deltamstep_dpll_abe;
+	u32 cm_ssc_modfreqdiv_dpll_abe;
+	u32 cm_clkmode_dpll_ddrphy;
+	u32 cm_idlest_dpll_ddrphy;
+	u32 cm_autoidle_dpll_ddrphy;
+	u32 cm_clksel_dpll_ddrphy;
+	u32 cm_div_m2_dpll_ddrphy;
+	u32 cm_div_h11_dpll_ddrphy;
+	u32 cm_div_h12_dpll_ddrphy;
+	u32 cm_div_h13_dpll_ddrphy;
+	u32 cm_ssc_deltamstep_dpll_ddrphy;
+	u32 cm_clkmode_dpll_dsp;
+	u32 cm_shadow_freq_config1;
+	u32 cm_clkmode_dpll_gmac;
+	u32 cm_mpu_mpu_clkctrl;
+
+	/* cm1.dsp */
+	u32 cm_dsp_clkstctrl;
+	u32 cm_dsp_dsp_clkctrl;
+
+	/* cm1.abe */
+	u32 cm1_abe_clkstctrl;
+	u32 cm1_abe_l4abe_clkctrl;
+	u32 cm1_abe_aess_clkctrl;
+	u32 cm1_abe_pdm_clkctrl;
+	u32 cm1_abe_dmic_clkctrl;
+	u32 cm1_abe_mcasp_clkctrl;
+	u32 cm1_abe_mcbsp1_clkctrl;
+	u32 cm1_abe_mcbsp2_clkctrl;
+	u32 cm1_abe_mcbsp3_clkctrl;
+	u32 cm1_abe_slimbus_clkctrl;
+	u32 cm1_abe_timer5_clkctrl;
+	u32 cm1_abe_timer6_clkctrl;
+	u32 cm1_abe_timer7_clkctrl;
+	u32 cm1_abe_timer8_clkctrl;
+	u32 cm1_abe_wdt3_clkctrl;
+
+	/* cm2.ckgen */
+	u32 cm_clksel_mpu_m3_iss_root;
+	u32 cm_clksel_usb_60mhz;
+	u32 cm_scale_fclk;
+	u32 cm_core_dvfs_perf1;
+	u32 cm_core_dvfs_perf2;
+	u32 cm_core_dvfs_perf3;
+	u32 cm_core_dvfs_perf4;
+	u32 cm_core_dvfs_current;
+	u32 cm_iva_dvfs_perf_tesla;
+	u32 cm_iva_dvfs_perf_ivahd;
+	u32 cm_iva_dvfs_perf_abe;
+	u32 cm_iva_dvfs_current;
+	u32 cm_clkmode_dpll_per;
+	u32 cm_idlest_dpll_per;
+	u32 cm_autoidle_dpll_per;
+	u32 cm_clksel_dpll_per;
+	u32 cm_div_m2_dpll_per;
+	u32 cm_div_m3_dpll_per;
+	u32 cm_div_h11_dpll_per;
+	u32 cm_div_h12_dpll_per;
+	u32 cm_div_h13_dpll_per;
+	u32 cm_div_h14_dpll_per;
+	u32 cm_ssc_deltamstep_dpll_per;
+	u32 cm_ssc_modfreqdiv_dpll_per;
+	u32 cm_emu_override_dpll_per;
+	u32 cm_clkmode_dpll_usb;
+	u32 cm_idlest_dpll_usb;
+	u32 cm_autoidle_dpll_usb;
+	u32 cm_clksel_dpll_usb;
+	u32 cm_div_m2_dpll_usb;
+	u32 cm_ssc_deltamstep_dpll_usb;
+	u32 cm_ssc_modfreqdiv_dpll_usb;
+	u32 cm_clkdcoldo_dpll_usb;
+	u32 cm_clkmode_dpll_pcie_ref;
+	u32 cm_clkmode_apll_pcie;
+	u32 cm_idlest_apll_pcie;
+	u32 cm_div_m2_apll_pcie;
+	u32 cm_clkvcoldo_apll_pcie;
+	u32 cm_clkmode_dpll_unipro;
+	u32 cm_idlest_dpll_unipro;
+	u32 cm_autoidle_dpll_unipro;
+	u32 cm_clksel_dpll_unipro;
+	u32 cm_div_m2_dpll_unipro;
+	u32 cm_ssc_deltamstep_dpll_unipro;
+	u32 cm_ssc_modfreqdiv_dpll_unipro;
+	u32 cm_coreaon_usb_phy1_core_clkctrl;
+	u32 cm_coreaon_usb_phy2_core_clkctrl;
+	u32 cm_coreaon_usb_phy3_core_clkctrl;
+	u32 cm_coreaon_l3init_60m_gfclk_clkctrl;
+
+	/* cm2.core */
+	u32 cm_coreaon_bandgap_clkctrl;
+	u32 cm_coreaon_io_srcomp_clkctrl;
+	u32 cm_l3_1_clkstctrl;
+	u32 cm_l3_1_dynamicdep;
+	u32 cm_l3_1_l3_1_clkctrl;
+	u32 cm_l3_2_clkstctrl;
+	u32 cm_l3_2_dynamicdep;
+	u32 cm_l3_2_l3_2_clkctrl;
+	u32 cm_l3_gpmc_clkctrl;
+	u32 cm_l3_2_ocmc_ram_clkctrl;
+	u32 cm_mpu_m3_clkstctrl;
+	u32 cm_mpu_m3_staticdep;
+	u32 cm_mpu_m3_dynamicdep;
+	u32 cm_mpu_m3_mpu_m3_clkctrl;
+	u32 cm_sdma_clkstctrl;
+	u32 cm_sdma_staticdep;
+	u32 cm_sdma_dynamicdep;
+	u32 cm_sdma_sdma_clkctrl;
+	u32 cm_memif_clkstctrl;
+	u32 cm_memif_dmm_clkctrl;
+	u32 cm_memif_emif_fw_clkctrl;
+	u32 cm_memif_emif_1_clkctrl;
+	u32 cm_memif_emif_2_clkctrl;
+	u32 cm_memif_dll_clkctrl;
+	u32 cm_memif_emif_h1_clkctrl;
+	u32 cm_memif_emif_h2_clkctrl;
+	u32 cm_memif_dll_h_clkctrl;
+	u32 cm_c2c_clkstctrl;
+	u32 cm_c2c_staticdep;
+	u32 cm_c2c_dynamicdep;
+	u32 cm_c2c_sad2d_clkctrl;
+	u32 cm_c2c_modem_icr_clkctrl;
+	u32 cm_c2c_sad2d_fw_clkctrl;
+	u32 cm_l4cfg_clkstctrl;
+	u32 cm_l4cfg_dynamicdep;
+	u32 cm_l4cfg_l4_cfg_clkctrl;
+	u32 cm_l4cfg_hw_sem_clkctrl;
+	u32 cm_l4cfg_mailbox_clkctrl;
+	u32 cm_l4cfg_sar_rom_clkctrl;
+	u32 cm_l3instr_clkstctrl;
+	u32 cm_l3instr_l3_3_clkctrl;
+	u32 cm_l3instr_l3_instr_clkctrl;
+	u32 cm_l3instr_intrconn_wp1_clkctrl;
+
+	/* cm2.ivahd */
+	u32 cm_ivahd_clkstctrl;
+	u32 cm_ivahd_ivahd_clkctrl;
+	u32 cm_ivahd_sl2_clkctrl;
+
+	/* cm2.cam */
+	u32 cm_cam_clkstctrl;
+	u32 cm_cam_iss_clkctrl;
+	u32 cm_cam_fdif_clkctrl;
+	u32 cm_cam_vip1_clkctrl;
+	u32 cm_cam_vip2_clkctrl;
+	u32 cm_cam_vip3_clkctrl;
+	u32 cm_cam_lvdsrx_clkctrl;
+	u32 cm_cam_csi1_clkctrl;
+	u32 cm_cam_csi2_clkctrl;
+
+	/* cm2.dss */
+	u32 cm_dss_clkstctrl;
+	u32 cm_dss_dss_clkctrl;
+
+	/* cm2.sgx */
+	u32 cm_sgx_clkstctrl;
+	u32 cm_sgx_sgx_clkctrl;
+
+	/* cm2.l3init */
+	u32 cm_l3init_clkstctrl;
+
+	/* cm2.l3init */
+	u32 cm_l3init_hsmmc1_clkctrl;
+	u32 cm_l3init_hsmmc2_clkctrl;
+	u32 cm_l3init_hsi_clkctrl;
+	u32 cm_l3init_hsusbhost_clkctrl;
+	u32 cm_l3init_hsusbotg_clkctrl;
+	u32 cm_l3init_hsusbtll_clkctrl;
+	u32 cm_l3init_p1500_clkctrl;
+	u32 cm_l3init_sata_clkctrl;
+	u32 cm_l3init_fsusb_clkctrl;
+	u32 cm_l3init_ocp2scp1_clkctrl;
+	u32 cm_l3init_ocp2scp3_clkctrl;
+	u32 cm_l3init_usb_otg_ss1_clkctrl;
+	u32 cm_l3init_usb_otg_ss2_clkctrl;
+
+	u32 prm_irqstatus_mpu;
+	u32 prm_irqstatus_mpu_2;
+
+	/* cm2.l4per */
+	u32 cm_l4per_clkstctrl;
+	u32 cm_l4per_dynamicdep;
+	u32 cm_l4per_adc_clkctrl;
+	u32 cm_l4per_gptimer10_clkctrl;
+	u32 cm_l4per_gptimer11_clkctrl;
+	u32 cm_l4per_gptimer2_clkctrl;
+	u32 cm_l4per_gptimer3_clkctrl;
+	u32 cm_l4per_gptimer4_clkctrl;
+	u32 cm_l4per_gptimer9_clkctrl;
+	u32 cm_l4per_elm_clkctrl;
+	u32 cm_l4per_gpio2_clkctrl;
+	u32 cm_l4per_gpio3_clkctrl;
+	u32 cm_l4per_gpio4_clkctrl;
+	u32 cm_l4per_gpio5_clkctrl;
+	u32 cm_l4per_gpio6_clkctrl;
+	u32 cm_l4per_hdq1w_clkctrl;
+	u32 cm_l4per_hecc1_clkctrl;
+	u32 cm_l4per_hecc2_clkctrl;
+	u32 cm_l4per_i2c1_clkctrl;
+	u32 cm_l4per_i2c2_clkctrl;
+	u32 cm_l4per_i2c3_clkctrl;
+	u32 cm_l4per_i2c4_clkctrl;
+	u32 cm_l4per_l4per_clkctrl;
+	u32 cm_l4per_mcasp2_clkctrl;
+	u32 cm_l4per_mcasp3_clkctrl;
+	u32 cm_l4per_mgate_clkctrl;
+	u32 cm_l4per_mcspi1_clkctrl;
+	u32 cm_l4per_mcspi2_clkctrl;
+	u32 cm_l4per_mcspi3_clkctrl;
+	u32 cm_l4per_mcspi4_clkctrl;
+	u32 cm_l4per_gpio7_clkctrl;
+	u32 cm_l4per_gpio8_clkctrl;
+	u32 cm_l4per_mmcsd3_clkctrl;
+	u32 cm_l4per_mmcsd4_clkctrl;
+	u32 cm_l4per_msprohg_clkctrl;
+	u32 cm_l4per_slimbus2_clkctrl;
+	u32 cm_l4per_qspi_clkctrl;
+	u32 cm_l4per_uart1_clkctrl;
+	u32 cm_l4per_uart2_clkctrl;
+	u32 cm_l4per_uart3_clkctrl;
+	u32 cm_l4per_uart4_clkctrl;
+	u32 cm_l4per_mmcsd5_clkctrl;
+	u32 cm_l4per_i2c5_clkctrl;
+	u32 cm_l4per_uart5_clkctrl;
+	u32 cm_l4per_uart6_clkctrl;
+	u32 cm_l4sec_clkstctrl;
+	u32 cm_l4sec_staticdep;
+	u32 cm_l4sec_dynamicdep;
+	u32 cm_l4sec_aes1_clkctrl;
+	u32 cm_l4sec_aes2_clkctrl;
+	u32 cm_l4sec_des3des_clkctrl;
+	u32 cm_l4sec_pkaeip29_clkctrl;
+	u32 cm_l4sec_rng_clkctrl;
+	u32 cm_l4sec_sha2md51_clkctrl;
+	u32 cm_l4sec_cryptodma_clkctrl;
+
+	/* l4 wkup regs */
+	u32 cm_abe_pll_ref_clksel;
+	u32 cm_sys_clksel;
+	u32 cm_abe_pll_sys_clksel;
+	u32 cm_wkup_clkstctrl;
+	u32 cm_wkup_l4wkup_clkctrl;
+	u32 cm_wkup_wdtimer1_clkctrl;
+	u32 cm_wkup_wdtimer2_clkctrl;
+	u32 cm_wkup_gpio1_clkctrl;
+	u32 cm_wkup_gptimer1_clkctrl;
+	u32 cm_wkup_gptimer12_clkctrl;
+	u32 cm_wkup_synctimer_clkctrl;
+	u32 cm_wkup_usim_clkctrl;
+	u32 cm_wkup_sarram_clkctrl;
+	u32 cm_wkup_keyboard_clkctrl;
+	u32 cm_wkup_rtc_clkctrl;
+	u32 cm_wkup_bandgap_clkctrl;
+	u32 cm_wkupaon_scrm_clkctrl;
+	u32 cm_wkupaon_io_srcomp_clkctrl;
+	u32 prm_rstctrl;
+	u32 prm_rstst;
+	u32 prm_rsttime;
+	u32 prm_io_pmctrl;
+	u32 prm_vc_val_bypass;
+	u32 prm_vc_cfg_i2c_mode;
+	u32 prm_vc_cfg_i2c_clk;
+	u32 prm_abbldo_mpu_setup;
+	u32 prm_abbldo_mpu_ctrl;
+	u32 prm_abbldo_mm_setup;
+	u32 prm_abbldo_mm_ctrl;
+	u32 prm_abbldo_iva_setup;
+	u32 prm_abbldo_iva_ctrl;
+	u32 prm_abbldo_eve_setup;
+	u32 prm_abbldo_eve_ctrl;
+	u32 prm_abbldo_gpu_setup;
+	u32 prm_abbldo_gpu_ctrl;
+
+	u32 cm_div_m4_dpll_core;
+	u32 cm_div_m5_dpll_core;
+	u32 cm_div_m6_dpll_core;
+	u32 cm_div_m7_dpll_core;
+	u32 cm_div_m4_dpll_iva;
+	u32 cm_div_m5_dpll_iva;
+	u32 cm_div_m4_dpll_ddrphy;
+	u32 cm_div_m5_dpll_ddrphy;
+	u32 cm_div_m6_dpll_ddrphy;
+	u32 cm_div_m4_dpll_per;
+	u32 cm_div_m5_dpll_per;
+	u32 cm_div_m6_dpll_per;
+	u32 cm_div_m7_dpll_per;
+	u32 cm_l3instr_intrconn_wp1_clkct;
+	u32 cm_l3init_usbphy_clkctrl;
+	u32 cm_l4per_mcbsp4_clkctrl;
+	u32 prm_vc_cfg_channel;
+
+	/* SCRM stuff, used by some boards */
+	u32 scrm_auxclk0;
+	u32 scrm_auxclk1;
+
+	/* GMAC Clk Ctrl */
+	u32 cm_gmac_gmac_clkctrl;
+	u32 cm_gmac_clkstctrl;
+
+	/* IPU */
+	u32 cm_ipu_clkstctrl;
+	u32 cm_ipu_i2c5_clkctrl;
+
+	/*l3main1 edma*/
+	u32 cm_l3main1_tptc1_clkctrl;
+	u32 cm_l3main1_tptc2_clkctrl;
+};
+
+struct omap_sys_ctrl_regs {
+	u32 control_status;
+	u32 control_core_mac_id_0_lo;
+	u32 control_core_mac_id_0_hi;
+	u32 control_core_mac_id_1_lo;
+	u32 control_core_mac_id_1_hi;
+	u32 control_phy_power_usb;
+	u32 control_core_mmr_lock1;
+	u32 control_core_mmr_lock2;
+	u32 control_core_mmr_lock3;
+	u32 control_core_mmr_lock4;
+	u32 control_core_mmr_lock5;
+	u32 control_core_control_io1;
+	u32 control_core_control_io2;
+	u32 control_id_code;
+	u32 control_std_fuse_die_id_0;
+	u32 control_std_fuse_die_id_1;
+	u32 control_std_fuse_die_id_2;
+	u32 control_std_fuse_die_id_3;
+	u32 control_std_fuse_opp_bgap;
+	u32 control_ldosram_iva_voltage_ctrl;
+	u32 control_ldosram_mpu_voltage_ctrl;
+	u32 control_ldosram_core_voltage_ctrl;
+	u32 control_usbotghs_ctrl;
+	u32 control_phy_power_sata;
+	u32 control_padconf_core_base;
+	u32 control_paconf_global;
+	u32 control_paconf_mode;
+	u32 control_smart1io_padconf_0;
+	u32 control_smart1io_padconf_1;
+	u32 control_smart1io_padconf_2;
+	u32 control_smart2io_padconf_0;
+	u32 control_smart2io_padconf_1;
+	u32 control_smart2io_padconf_2;
+	u32 control_smart3io_padconf_0;
+	u32 control_smart3io_padconf_1;
+	u32 control_pbias;
+	u32 control_i2c_0;
+	u32 control_camera_rx;
+	u32 control_hdmi_tx_phy;
+	u32 control_uniportm;
+	u32 control_dsiphy;
+	u32 control_mcbsplp;
+	u32 control_usb2phycore;
+	u32 control_hdmi_1;
+	u32 control_hsi;
+	u32 control_ddr3ch1_0;
+	u32 control_ddr3ch2_0;
+	u32 control_ddrch1_0;
+	u32 control_ddrch1_1;
+	u32 control_ddrch2_0;
+	u32 control_ddrch2_1;
+	u32 control_lpddr2ch1_0;
+	u32 control_lpddr2ch1_1;
+	u32 control_ddrio_0;
+	u32 control_ddrio_1;
+	u32 control_ddrio_2;
+	u32 control_ddr_control_ext_0;
+	u32 control_lpddr2io1_0;
+	u32 control_lpddr2io1_1;
+	u32 control_lpddr2io1_2;
+	u32 control_lpddr2io1_3;
+	u32 control_lpddr2io2_0;
+	u32 control_lpddr2io2_1;
+	u32 control_lpddr2io2_2;
+	u32 control_lpddr2io2_3;
+	u32 control_hyst_1;
+	u32 control_usbb_hsic_control;
+	u32 control_c2c;
+	u32 control_core_control_spare_rw;
+	u32 control_core_control_spare_r;
+	u32 control_core_control_spare_r_c0;
+	u32 control_srcomp_north_side;
+	u32 control_srcomp_south_side;
+	u32 control_srcomp_east_side;
+	u32 control_srcomp_west_side;
+	u32 control_srcomp_code_latch;
+	u32 control_pbiaslite;
+	u32 control_port_emif1_sdram_config;
+	u32 control_port_emif1_lpddr2_nvm_config;
+	u32 control_port_emif2_sdram_config;
+	u32 control_emif1_sdram_config_ext;
+	u32 control_emif2_sdram_config_ext;
+	u32 control_wkup_ldovbb_mpu_voltage_ctrl;
+	u32 control_wkup_ldovbb_mm_voltage_ctrl;
+	u32 control_wkup_ldovbb_iva_voltage_ctrl;
+	u32 control_wkup_ldovbb_eve_voltage_ctrl;
+	u32 control_wkup_ldovbb_gpu_voltage_ctrl;
+	u32 control_smart1nopmio_padconf_0;
+	u32 control_smart1nopmio_padconf_1;
+	u32 control_padconf_mode;
+	u32 control_xtal_oscillator;
+	u32 control_i2c_2;
+	u32 control_ckobuffer;
+	u32 control_wkup_control_spare_rw;
+	u32 control_wkup_control_spare_r;
+	u32 control_wkup_control_spare_r_c0;
+	u32 control_srcomp_east_side_wkup;
+	u32 control_efuse_1;
+	u32 control_efuse_2;
+	u32 control_efuse_3;
+	u32 control_efuse_4;
+	u32 control_efuse_5;
+	u32 control_efuse_6;
+	u32 control_efuse_7;
+	u32 control_efuse_8;
+	u32 control_efuse_9;
+	u32 control_efuse_10;
+	u32 control_efuse_11;
+	u32 control_efuse_12;
+	u32 control_efuse_13;
+	u32 control_padconf_wkup_base;
+	u32 iodelay_config_base;
+	u32 ctrl_core_sma_sw_0;
+	u32 ctrl_core_sma_sw_1;
+};
+
+#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX)
+struct dpll_params {
+	u32 m;
+	u32 n;
+	s8 m2;
+	s8 m3;
+	s8 m4_h11;
+	s8 m5_h12;
+	s8 m6_h13;
+	s8 m7_h14;
+	s8 h21;
+	s8 h22;
+	s8 h23;
+	s8 h24;
+};
+
+struct dpll_regs {
+	u32 cm_clkmode_dpll;
+	u32 cm_idlest_dpll;
+	u32 cm_autoidle_dpll;
+	u32 cm_clksel_dpll;
+	u32 cm_div_m2_dpll;
+	u32 cm_div_m3_dpll;
+	u32 cm_div_m4_h11_dpll;
+	u32 cm_div_m5_h12_dpll;
+	u32 cm_div_m6_h13_dpll;
+	u32 cm_div_m7_h14_dpll;
+	u32 reserved[2];
+	u32 cm_div_h21_dpll;
+	u32 cm_div_h22_dpll;
+	u32 cm_div_h23_dpll;
+	u32 cm_div_h24_dpll;
+};
+#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+
+struct dplls {
+	const struct dpll_params *mpu;
+	const struct dpll_params *core;
+	const struct dpll_params *per;
+	const struct dpll_params *abe;
+	const struct dpll_params *iva;
+	const struct dpll_params *usb;
+	const struct dpll_params *ddr;
+	const struct dpll_params *gmac;
+};
+
+struct pmic_data {
+	u32 base_offset;
+	u32 step;
+	u32 start_code;
+	unsigned gpio;
+	int gpio_en;
+	u32 i2c_slave_addr;
+	void (*pmic_bus_init)(void);
+	int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data);
+};
+
+#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX)
+enum {
+	OPP_LOW,
+	OPP_NOM,
+	OPP_OD,
+	OPP_HIGH,
+	NUM_OPPS,
+};
+
+/**
+ * struct volts_efuse_data - efuse definition for voltage
+ * @reg:	register address for efuse
+ * @reg_bits:	Number of bits in a register address, mandatory.
+ */
+struct volts_efuse_data {
+	u32 reg[NUM_OPPS];
+	u8 reg_bits;
+};
+
+struct volts {
+	u32 value[NUM_OPPS];
+	u32 addr;
+	struct volts_efuse_data efuse;
+	struct pmic_data *pmic;
+
+	u32 abb_tx_done_mask;
+};
+
+enum {
+	VOLT_MPU,
+	VOLT_CORE,
+	VOLT_MM,
+	VOLT_GPU,
+	VOLT_EVE,
+	VOLT_IVA,
+	NUM_VOLT_RAILS,
+};
+
+struct vcores_data {
+	struct volts mpu;
+	struct volts core;
+	struct volts mm;
+	struct volts gpu;
+	struct volts eve;
+	struct volts iva;
+};
+#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+
+extern struct prcm_regs const **prcm;
+extern struct prcm_regs const omap5_es1_prcm;
+extern struct prcm_regs const omap5_es2_prcm;
+extern struct prcm_regs const omap4_prcm;
+extern struct prcm_regs const dra7xx_prcm;
+extern struct dplls const **dplls_data;
+extern struct dplls dra7xx_dplls;
+extern struct dplls dra72x_dplls;
+extern struct dplls dra76x_dplls;
+extern struct vcores_data const **omap_vcores;
+extern const u32 sys_clk_array[8];
+extern struct omap_sys_ctrl_regs const **ctrl;
+extern struct omap_sys_ctrl_regs const am33xx_ctrl;
+extern struct omap_sys_ctrl_regs const omap3_ctrl;
+extern struct omap_sys_ctrl_regs const omap4_ctrl;
+extern struct omap_sys_ctrl_regs const omap5_ctrl;
+extern struct omap_sys_ctrl_regs const dra7xx_ctrl;
+
+extern struct pmic_data tps659038;
+extern struct pmic_data lp8733;
+extern struct pmic_data lp87565;
+
+void hw_data_init(void);
+
+const struct dpll_params *get_mpu_dpll_params(struct dplls const *);
+const struct dpll_params *get_core_dpll_params(struct dplls const *);
+const struct dpll_params *get_per_dpll_params(struct dplls const *);
+const struct dpll_params *get_iva_dpll_params(struct dplls const *);
+const struct dpll_params *get_usb_dpll_params(struct dplls const *);
+const struct dpll_params *get_abe_dpll_params(struct dplls const *);
+
+#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX)
+void do_enable_clocks(u32 const *clk_domains,
+		      u32 const *clk_modules_hw_auto,
+		      u32 const *clk_modules_explicit_en,
+		      u8 wait_for_enable);
+
+void do_disable_clocks(u32 const *clk_domains,
+		       u32 const *clk_modules_disable,
+		       u8 wait_for_disable);
+#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+
+void setup_post_dividers(u32 const base,
+			const struct dpll_params *params);
+u32 omap_ddr_clk(void);
+u32 get_sys_clk_index(void);
+void enable_basic_clocks(void);
+void enable_basic_uboot_clocks(void);
+
+void enable_usb_clocks(int index);
+void disable_usb_clocks(int index);
+
+#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX)
+void scale_vcores(struct vcores_data const *);
+#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+int get_voltrail_opp(int rail_offset);
+u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+	       u32 txdone, u32 txdone_mask, u32 opp);
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
+
+struct tag_serialnr;
+
+void omap_die_id_serial(void);
+void omap_die_id_get_board_serial(struct tag_serialnr *serialnr);
+void omap_die_id_usbethaddr(void);
+void omap_die_id_display(void);
+
+#ifdef CONFIG_FASTBOOT_FLASH
+void omap_set_fastboot_vars(void);
+#else
+static inline void omap_set_fastboot_vars(void) { }
+#endif
+
+void recalibrate_iodelay(void);
+
+void omap_smc1(u32 service, u32 val);
+
+/*
+ * Low-level helper function used when performing secure ROM calls on high-
+ * security (HS) device variants by doing a specially-formed smc entry.
+ */
+u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params);
+u32 omap_smc_sec_cpu1(u32 service, u32 proc_id, u32 flag, u32 *params);
+
+void enable_edma3_clocks(void);
+void disable_edma3_clocks(void);
+
+void omap_die_id(unsigned int *die_id);
+
+/* Initialize general purpose I2C(0) on the SoC */
+void gpi2c_init(void);
+
+/* Common FDT Fixups */
+int ft_hs_disable_rng(void *fdt, struct bd_info *bd);
+int ft_hs_fixup_dram(void *fdt, struct bd_info *bd);
+int ft_hs_add_tee(void *fdt, struct bd_info *bd);
+
+/* ABB */
+#define OMAP_ABB_NOMINAL_OPP		0
+#define OMAP_ABB_FAST_OPP		1
+#define OMAP_ABB_SLOW_OPP		3
+#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK		(0x1 << 0)
+#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK		(0x1 << 1)
+#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK		(0x1 << 2)
+#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK		(0x1 << 6)
+#define OMAP_ABB_SETUP_SR2EN_MASK			(0x1 << 0)
+#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK		(0x1 << 2)
+#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK		(0x1 << 1)
+#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK		(0xff << 8)
+
+static inline u32 omap_revision(void)
+{
+	extern u32 *const omap_si_rev;
+	return *omap_si_rev;
+}
+
+#define OMAP44xx	0x44000000
+
+static inline u8 is_omap44xx(void)
+{
+	extern u32 *const omap_si_rev;
+	return (*omap_si_rev & 0xFF000000) == OMAP44xx;
+};
+
+#define OMAP54xx	0x54000000
+
+static inline u8 is_omap54xx(void)
+{
+	extern u32 *const omap_si_rev;
+	return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
+}
+
+#define DRA7XX		0x07000000
+#define DRA72X		0x07200000
+#define DRA76X		0x07600000
+
+static inline u8 is_dra7xx(void)
+{
+	extern u32 *const omap_si_rev;
+	return ((*omap_si_rev & 0xFF000000) == DRA7XX);
+}
+
+static inline u8 is_dra72x(void)
+{
+	extern u32 *const omap_si_rev;
+	return (*omap_si_rev & 0xFFF00000) == DRA72X;
+}
+
+static inline u8 is_dra76x(void)
+{
+	extern u32 *const omap_si_rev;
+	return (*omap_si_rev & 0xFFF00000) == DRA76X;
+}
+
+static inline u8 is_dra76x_abz(void)
+{
+	extern u32 *const omap_si_rev;
+	return (*omap_si_rev & 0xF) == 2;
+}
+
+static inline u8 is_dra76x_acd(void)
+{
+	extern u32 *const omap_si_rev;
+	return (*omap_si_rev & 0xF) == 3;
+}
+#endif
+
+/*
+ * silicon revisions.
+ * Moving this to common, so that most of code can be moved to common,
+ * directories.
+ */
+
+/* omap4 */
+#define OMAP4430_SILICON_ID_INVALID	0xFFFFFFFF
+#define OMAP4430_ES1_0	0x44300100
+#define OMAP4430_ES2_0	0x44300200
+#define OMAP4430_ES2_1	0x44300210
+#define OMAP4430_ES2_2	0x44300220
+#define OMAP4430_ES2_3	0x44300230
+#define OMAP4460_ES1_0	0x44600100
+#define OMAP4460_ES1_1	0x44600110
+#define OMAP4470_ES1_0	0x44700100
+
+/* omap5 */
+#define OMAP5430_SILICON_ID_INVALID	0
+#define OMAP5430_ES1_0	0x54300100
+#define OMAP5432_ES1_0	0x54320100
+#define OMAP5430_ES2_0  0x54300200
+#define OMAP5432_ES2_0  0x54320200
+
+/* DRA7XX */
+#define DRA762_ES1_0	0x07620100
+#define DRA752_ES1_0	0x07520100
+#define DRA752_ES1_1	0x07520110
+#define DRA752_ES2_0	0x07520200
+#define DRA722_ES1_0	0x07220100
+#define DRA722_ES2_0	0x07220200
+#define DRA722_ES2_1	0x07220210
+
+#define DRA762_ABZ_ES1_0	0x07620102
+#define DRA762_ACD_ES1_0	0x07620103
+/*
+ * silicon device type
+ * Moving to common from cpu.h, since it is shared by various omap devices
+ */
+#define TST_DEVICE          0x0
+#define EMU_DEVICE          0x1
+#define HS_DEVICE           0x2
+#define GP_DEVICE           0x3
+
+
+/*
+ * SRAM scratch space entries
+ */
+#define OMAP_SRAM_SCRATCH_OMAP_REV	SRAM_SCRATCH_SPACE_ADDR
+#define OMAP_SRAM_SCRATCH_EMIF_SIZE	(SRAM_SCRATCH_SPACE_ADDR + 0x4)
+#define OMAP_SRAM_SCRATCH_EMIF_T_NUM	(SRAM_SCRATCH_SPACE_ADDR + 0xC)
+#define OMAP_SRAM_SCRATCH_EMIF_T_DEN	(SRAM_SCRATCH_SPACE_ADDR + 0x10)
+#define OMAP_SRAM_SCRATCH_PRCM_PTR      (SRAM_SCRATCH_SPACE_ADDR + 0x14)
+#define OMAP_SRAM_SCRATCH_DPLLS_PTR     (SRAM_SCRATCH_SPACE_ADDR + 0x18)
+#define OMAP_SRAM_SCRATCH_VCORES_PTR    (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+#define OMAP_SRAM_SCRATCH_SYS_CTRL	(SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP_SRAM_SCRATCH_BOOT_PARAMS	(SRAM_SCRATCH_SPACE_ADDR + 0x24)
+#ifndef TI_SRAM_SCRATCH_BOARD_EEPROM_START
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START (SRAM_SCRATCH_SPACE_ADDR + 0x28)
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_END (SRAM_SCRATCH_SPACE_ADDR + 0x200)
+#endif
+#define OMAP_SRAM_SCRATCH_SPACE_END	(TI_SRAM_SCRATCH_BOARD_EEPROM_END)
+
+/* Boot parameters */
+#define DEVICE_DATA_OFFSET	0x18
+#define BOOT_MODE_OFFSET	0x8
+
+#define CH_FLAGS_CHSETTINGS	(1 << 0)
+#define CH_FLAGS_CHRAM		(1 << 1)
+#define CH_FLAGS_CHFLASH	(1 << 2)
+#define CH_FLAGS_CHMMCSD	(1 << 3)
+
+#ifndef __ASSEMBLY__
+u32 omap_sys_boot_device(void);
+#endif
+
+#endif /* _OMAP_COMMON_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/omap_gpio.h b/roms/u-boot/arch/arm/include/asm/omap_gpio.h
new file mode 100644
index 000000000..408421002
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/omap_gpio.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This work is derived from the linux 2.6.27 kernel source
+ * To fetch, use the kernel repository
+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ * Use the v2.6.27 tag.
+ *
+ * Below is the original's header including its copyright
+ *
+ *  linux/arch/arm/plat-omap/gpio.c
+ *
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+#ifndef _GPIO_H
+#define _GPIO_H
+
+#include <asm/arch/cpu.h>
+
+#if CONFIG_IS_ENABLED(DM_GPIO)
+
+/* Information about a GPIO bank */
+struct omap_gpio_plat {
+	int bank_index;
+	ulong base;	/* address of registers in physical memory */
+	const char *port_name;
+};
+
+#else
+
+struct gpio_bank {
+	void *base;
+};
+
+extern const struct gpio_bank *const omap_gpio_bank;
+
+/**
+ * Check if gpio is valid.
+ *
+ * @param gpio	GPIO number
+ * @return 1 if ok, 0 on error
+ */
+int gpio_is_valid(int gpio);
+#endif
+
+#endif /* _GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/omap_i2c.h b/roms/u-boot/arch/arm/include/asm/omap_i2c.h
new file mode 100644
index 000000000..9f0f27223
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/omap_i2c.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _OMAP_I2C_H
+#define _OMAP_I2C_H
+
+#if CONFIG_IS_ENABLED(DM_I2C)
+
+/* Information about a GPIO bank */
+struct omap_i2c_plat {
+	ulong base;	/* address of registers in physical memory */
+	int speed;
+	int ip_rev;
+};
+
+#endif
+
+enum {
+	OMAP_I2C_REV_V1 = 0,
+	OMAP_I2C_REV_V2 = 1,
+};
+
+#endif /* _OMAP_I2C_H */
diff --git a/roms/u-boot/arch/arm/include/asm/omap_mmc.h b/roms/u-boot/arch/arm/include/asm/omap_mmc.h
new file mode 100644
index 000000000..7933ad5a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/omap_mmc.h
@@ -0,0 +1,240 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef OMAP_MMC_H_
+#define OMAP_MMC_H_
+
+#include <mmc.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct hsmmc {
+#ifndef CONFIG_OMAP34XX
+	unsigned int hl_rev;
+	unsigned int hl_hwinfo;
+	unsigned int hl_sysconfig;
+	unsigned char res0[0xf4];
+#endif
+	unsigned char res1[0x10];
+	unsigned int sysconfig;		/* 0x10 */
+	unsigned int sysstatus;		/* 0x14 */
+	unsigned char res2[0x14];
+	unsigned int con;		/* 0x2C */
+	unsigned int pwcnt;		/* 0x30 */
+	unsigned int dll;		/* 0x34 */
+	unsigned char res3[0xcc];
+	unsigned int blk;		/* 0x104 */
+	unsigned int arg;		/* 0x108 */
+	unsigned int cmd;		/* 0x10C */
+	unsigned int rsp10;		/* 0x110 */
+	unsigned int rsp32;		/* 0x114 */
+	unsigned int rsp54;		/* 0x118 */
+	unsigned int rsp76;		/* 0x11C */
+	unsigned int data;		/* 0x120 */
+	unsigned int pstate;		/* 0x124 */
+	unsigned int hctl;		/* 0x128 */
+	unsigned int sysctl;		/* 0x12C */
+	unsigned int stat;		/* 0x130 */
+	unsigned int ie;		/* 0x134 */
+	unsigned char res4[0x4];
+	unsigned int ac12;		/* 0x13C */
+	unsigned int capa;		/* 0x140 */
+	unsigned int capa2;		/* 0x144 */
+	unsigned char res5[0xc];
+	unsigned int admaes;		/* 0x154 */
+	unsigned int admasal;		/* 0x158 */
+};
+
+struct omap_hsmmc_plat {
+	struct mmc_config cfg;
+	struct hsmmc *base_addr;
+	struct mmc *mmc;
+	u32 controller_flags;
+	const char *hw_rev;
+};
+
+/*
+ * OMAP HS MMC Bit definitions
+ */
+#define MADMA_EN			(0x1 << 0)
+#define MMC_SOFTRESET			(0x1 << 1)
+#define RESETDONE			(0x1 << 0)
+#define NOOPENDRAIN			(0x0 << 0)
+#define OPENDRAIN			(0x1 << 0)
+#define OD				(0x1 << 0)
+#define INIT_NOINIT			(0x0 << 1)
+#define INIT_INITSTREAM			(0x1 << 1)
+#define HR_NOHOSTRESP			(0x0 << 2)
+#define STR_BLOCK			(0x0 << 3)
+#define MODE_FUNC			(0x0 << 4)
+#define DW8_1_4BITMODE			(0x0 << 5)
+#define MIT_CTO				(0x0 << 6)
+#define CDP_ACTIVEHIGH			(0x0 << 7)
+#define WPP_ACTIVEHIGH			(0x0 << 8)
+#define RESERVED_MASK			(0x3 << 9)
+#define CTPL_MMC_SD			(0x0 << 11)
+#define DDR				(0x1 << 19)
+#define DMA_MASTER			(0x1 << 20)
+#define BLEN_512BYTESLEN		(0x200 << 0)
+#define NBLK_STPCNT			(0x0 << 16)
+#define DE_ENABLE			(0x1 << 0)
+#define BCE_ENABLE			(0x1 << 1)
+#define ACEN_ENABLE			(0x1 << 2)
+#define DDIR_OFFSET			(4)
+#define DDIR_MASK			(0x1 << 4)
+#define DDIR_WRITE			(0x0 << 4)
+#define DDIR_READ			(0x1 << 4)
+#define MSBS_SGLEBLK			(0x0 << 5)
+#define MSBS_MULTIBLK			(0x1 << 5)
+#define RSP_TYPE_OFFSET			(16)
+#define RSP_TYPE_MASK			(0x3 << 16)
+#define RSP_TYPE_NORSP			(0x0 << 16)
+#define RSP_TYPE_LGHT136		(0x1 << 16)
+#define RSP_TYPE_LGHT48			(0x2 << 16)
+#define RSP_TYPE_LGHT48B		(0x3 << 16)
+#define CCCE_NOCHECK			(0x0 << 19)
+#define CCCE_CHECK			(0x1 << 19)
+#define CICE_NOCHECK			(0x0 << 20)
+#define CICE_CHECK			(0x1 << 20)
+#define DP_OFFSET			(21)
+#define DP_MASK				(0x1 << 21)
+#define DP_NO_DATA			(0x0 << 21)
+#define DP_DATA				(0x1 << 21)
+#define CMD_TYPE_NORMAL			(0x0 << 22)
+#define INDEX_OFFSET			(24)
+#define INDEX_MASK			(0x3f << 24)
+#define INDEX(i)			(i << 24)
+#define DATI_MASK			(0x1 << 1)
+#define CMDI_MASK			(0x1 << 0)
+#define DTW_1_BITMODE			(0x0 << 1)
+#define DTW_4_BITMODE			(0x1 << 1)
+#define DTW_8_BITMODE                   (0x1 << 5) /* CON[DW8]*/
+#define SDBP_PWROFF			(0x0 << 8)
+#define SDBP_PWRON			(0x1 << 8)
+#define SDVS_MASK			(0x7 << 9)
+#define SDVS_1V8			(0x5 << 9)
+#define SDVS_3V0			(0x6 << 9)
+#define SDVS_3V3			(0x7 << 9)
+#define DMA_SELECT			(0x2 << 3)
+#define ICE_MASK			(0x1 << 0)
+#define ICE_STOP			(0x0 << 0)
+#define ICS_MASK			(0x1 << 1)
+#define ICS_NOTREADY			(0x0 << 1)
+#define ICE_OSCILLATE			(0x1 << 0)
+#define CEN_MASK			(0x1 << 2)
+#define CEN_ENABLE			(0x1 << 2)
+#define CLKD_OFFSET			(6)
+#define CLKD_MASK			(0x3FF << 6)
+#define DTO_MASK			(0xF << 16)
+#define DTO_15THDTO			(0xE << 16)
+#define SOFTRESETALL			(0x1 << 24)
+#define CC_MASK				(0x1 << 0)
+#define TC_MASK				(0x1 << 1)
+#define BWR_MASK			(0x1 << 4)
+#define BRR_MASK			(0x1 << 5)
+#define ERRI_MASK			(0x1 << 15)
+#define IE_CC				(0x01 << 0)
+#define IE_TC				(0x01 << 1)
+#define IE_BWR				(0x01 << 4)
+#define IE_BRR				(0x01 << 5)
+#define IE_CTO				(0x01 << 16)
+#define IE_CCRC				(0x01 << 17)
+#define IE_CEB				(0x01 << 18)
+#define IE_CIE				(0x01 << 19)
+#define IE_DTO				(0x01 << 20)
+#define IE_DCRC				(0x01 << 21)
+#define IE_DEB				(0x01 << 22)
+#define IE_ADMAE			(0x01 << 25)
+#define IE_CERR				(0x01 << 28)
+#define IE_BADA				(0x01 << 29)
+
+#define VS33_3V3SUP			BIT(24)
+#define VS30_3V0SUP			BIT(25)
+#define VS18_1V8SUP			BIT(26)
+
+#define AC12_ET				BIT(22)
+#define AC12_V1V8_SIGEN			BIT(19)
+#define AC12_SCLK_SEL			BIT(23)
+#define AC12_UHSMC_MASK			(7 << 16)
+#define AC12_UHSMC_DDR50		(4 << 16)
+#define AC12_UHSMC_SDR104		(3 << 16)
+#define AC12_UHSMC_SDR50		(2 << 16)
+#define AC12_UHSMC_SDR25		(1 << 16)
+#define AC12_UHSMC_SDR12		(0 << 16)
+#define AC12_UHSMC_RES			(0x7 << 16)
+
+/* Driver definitions */
+#define MMCSD_SECTOR_SIZE		512
+#define MMC_CARD			0
+#define SD_CARD				1
+#define BYTE_MODE			0
+#define SECTOR_MODE			1
+#define CLK_INITSEQ			0
+#define CLK_400KHZ			1
+#define CLK_MISC			2
+
+#define CLKD_MAX			0x3FF	/* max clock divisor: 1023 */
+
+#define RSP_TYPE_NONE	(RSP_TYPE_NORSP   | CCCE_NOCHECK | CICE_NOCHECK)
+#define MMC_CMD0	(INDEX(0)  | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
+
+/* Clock Configurations and Macros */
+#ifdef CONFIG_OMAP54XX
+#define MMC_CLOCK_REFERENCE	192 /* MHz */
+#else
+#define MMC_CLOCK_REFERENCE	96 /* MHz */
+#endif
+
+/* DLL */
+#define DLL_SWT			BIT(20)
+#define DLL_FORCE_SR_C_SHIFT	13
+#define DLL_FORCE_SR_C_MASK	0x7f
+#define DLL_FORCE_VALUE		BIT(12)
+#define DLL_CALIB		BIT(1)
+
+#define MAX_PHASE_DELAY		0x7c
+
+/* CAPA2 */
+#define CAPA2_TSDR50		BIT(13)
+
+#define mmc_reg_out(addr, mask, val)\
+	writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
+
+#define INT_EN_MASK (IE_BADA | IE_CERR | IE_DEB | IE_DCRC |\
+		IE_DTO | IE_CIE | IE_CEB | IE_CCRC | IE_ADMAE | IE_CTO |\
+		IE_BRR | IE_BWR | IE_TC | IE_CC)
+
+#define CON_CLKEXTFREE		BIT(16)
+#define CON_PADEN		BIT(15)
+#define PSTATE_CLEV		BIT(24)
+#define PSTATE_DLEV		(0xF << 20)
+#define PSTATE_DLEV_DAT0	(0x1 << 20)
+
+int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
+		int wp_gpio);
+
+void vmmc_pbias_config(uint voltage);
+void board_mmc_poweron_ldo(uint voltage);
+#endif /* OMAP_MMC_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/omap_musb.h b/roms/u-boot/arch/arm/include/asm/omap_musb.h
new file mode 100644
index 000000000..614c93def
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/omap_musb.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board data structure for musb gadget on OMAPs
+ *
+ * Copyright (C) 2012, Ilya Yanok <ilya.yanok@gmail.com>
+ */
+
+#ifndef __ASM_ARM_OMAP_MUSB_H
+#define __ASM_ARM_OMAP_MUSB_H
+#include <linux/usb/musb.h>
+
+extern struct musb_platform_ops musb_dsps_ops;
+extern const struct musb_platform_ops am35x_ops;
+extern const struct musb_platform_ops omap2430_ops;
+
+struct omap_musb_board_data {
+	u8 interface_type;
+	struct udevice *dev;
+	void (*set_phy_power)(struct udevice *dev, u8 on);
+	void (*clear_irq)(struct udevice *dev);
+	void (*reset)(struct udevice *dev);
+};
+
+enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+struct ti_musb_plat {
+	void *base;
+	void *ctrl_mod_base;
+	struct musb_hdrc_platform_data plat;
+};
+
+#endif /* __ASM_ARM_OMAP_MUSB_H */
diff --git a/roms/u-boot/arch/arm/include/asm/omap_sec_common.h b/roms/u-boot/arch/arm/include/asm/omap_sec_common.h
new file mode 100644
index 000000000..30f0a9f5c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/omap_sec_common.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andreas Dannenberg <dannenberg@ti.com>
+ */
+#ifndef	_OMAP_SEC_COMMON_H_
+#define	_OMAP_SEC_COMMON_H_
+
+/*
+ * Invoke secure ROM API on high-security (HS) device variants. It formats
+ * the variable argument list into the format expected by the ROM code before
+ * triggering the actual low-level smc entry.
+ */
+u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...);
+
+/*
+ * Invoke a secure ROM API on high-secure (HS) device variants that can be used
+ * to verify a secure blob by authenticating and optionally decrypting it. The
+ * exact operation performed depends on how the certificate that was embedded
+ * into the blob during the signing/encryption step when the secure blob was
+ * first created.
+ */
+int secure_boot_verify_image(void **p_image, size_t *p_size);
+
+/*
+ * Return the start of secure reserved RAM, if a default start address has
+ * not been configured then return a region at the end of the external DRAM.
+ */
+u32 get_sec_mem_start(void);
+
+/*
+ * Invoke a secure HAL API that allows configuration of the external memory
+ * firewall regions.
+ */
+int secure_emif_firewall_setup(uint8_t region_num, uint32_t start_addr,
+			       uint32_t size, uint32_t access_perm,
+			       uint32_t initiator_perm);
+
+/*
+ * Invoke a secure HAL API on high-secure (HS) device variants that reserves a
+ * region of external memory for secure world use, and protects it using memory
+ * firewalls that prevent public world access. This API is intended to setaside
+ * memory that will be used for a secure world OS/TEE.
+ */
+int secure_emif_reserve(void);
+
+/*
+ * Invoke a secure HAL API to lock the external memory firewall configurations.
+ * After this API is called, none of the HAL APIs for configuring the that
+ * firewall will be usable (calls to those APIs will return failure and have
+ * no effect).
+ */
+int secure_emif_firewall_lock(void);
+
+/*
+ * Invoke a secure HAL API to authenticate and install a Trusted Execution
+ * Environment (TEE) image.
+ */
+int secure_tee_install(u32 tee_image);
+
+#endif /* _OMAP_SEC_COMMON_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/opcodes-sec.h b/roms/u-boot/arch/arm/include/asm/opcodes-sec.h
new file mode 100644
index 000000000..55c696c5b
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/opcodes-sec.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#ifndef __ASM_ARM_OPCODES_SEC_H
+#define __ASM_ARM_OPCODES_SEC_H
+
+#include <asm/opcodes.h>
+
+#define __SMC(imm4) __inst_arm_thumb32(					\
+	0xE1600070 | (((imm4) & 0xF) << 0),				\
+	0xF7F08000 | (((imm4) & 0xF) << 16)				\
+)
+
+#endif /* __ASM_ARM_OPCODES_SEC_H */
diff --git a/roms/u-boot/arch/arm/include/asm/opcodes-virt.h b/roms/u-boot/arch/arm/include/asm/opcodes-virt.h
new file mode 100644
index 000000000..437b9a899
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/opcodes-virt.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
+ * Copyright (C) 2012  Linaro Limited
+ */
+#ifndef __ASM_ARM_OPCODES_VIRT_H
+#define __ASM_ARM_OPCODES_VIRT_H
+
+#include <asm/opcodes.h>
+
+#define __HVC(imm16) __inst_arm_thumb32(				\
+	0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F),	\
+	0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF)	\
+)
+
+#define __ERET	__inst_arm_thumb32(					\
+	0xE160006E,							\
+	0xF3DE8F00							\
+)
+
+#define __MSR_ELR_HYP(regnum)	__inst_arm_thumb32(			\
+	0xE12EF300 | regnum,						\
+	0xF3808E30 | (regnum << 16)					\
+)
+
+#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
diff --git a/roms/u-boot/arch/arm/include/asm/opcodes.h b/roms/u-boot/arch/arm/include/asm/opcodes.h
new file mode 100644
index 000000000..21b334429
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/opcodes.h
@@ -0,0 +1,228 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  arch/arm/include/asm/opcodes.h
+ */
+
+#ifndef __ASM_ARM_OPCODES_H
+#define __ASM_ARM_OPCODES_H
+
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
+#endif
+
+#define ARM_OPCODE_CONDTEST_FAIL   0
+#define ARM_OPCODE_CONDTEST_PASS   1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
+
+
+/*
+ * Assembler opcode byteswap helpers.
+ * These are only intended for use by this header: don't use them directly,
+ * because they will be suboptimal in most cases.
+ */
+#define ___asm_opcode_swab32(x) (	\
+	  (((x) << 24) & 0xFF000000)	\
+	| (((x) <<  8) & 0x00FF0000)	\
+	| (((x) >>  8) & 0x0000FF00)	\
+	| (((x) >> 24) & 0x000000FF)	\
+)
+#define ___asm_opcode_swab16(x) (	\
+	  (((x) << 8) & 0xFF00)		\
+	| (((x) >> 8) & 0x00FF)		\
+)
+#define ___asm_opcode_swahb32(x) (	\
+	  (((x) << 8) & 0xFF00FF00)	\
+	| (((x) >> 8) & 0x00FF00FF)	\
+)
+#define ___asm_opcode_swahw32(x) (	\
+	  (((x) << 16) & 0xFFFF0000)	\
+	| (((x) >> 16) & 0x0000FFFF)	\
+)
+#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
+#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
+
+
+/*
+ * Opcode byteswap helpers
+ *
+ * These macros help with converting instructions between a canonical integer
+ * format and in-memory representation, in an endianness-agnostic manner.
+ *
+ * __mem_to_opcode_*() convert from in-memory representation to canonical form.
+ * __opcode_to_mem_*() convert from canonical form to in-memory representation.
+ *
+ *
+ * Canonical instruction representation:
+ *
+ *	ARM:		0xKKLLMMNN
+ *	Thumb 16-bit:	0x0000KKLL, where KK < 0xE8
+ *	Thumb 32-bit:	0xKKLLMMNN, where KK >= 0xE8
+ *
+ * There is no way to distinguish an ARM instruction in canonical representation
+ * from a Thumb instruction (just as these cannot be distinguished in memory).
+ * Where this distinction is important, it needs to be tracked separately.
+ *
+ * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
+ * represent any valid Thumb-2 instruction.  For this range,
+ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
+ *
+ * The ___asm variants are intended only for use by this header, in situations
+ * involving inline assembler.  For .S files, the normal __opcode_*() macros
+ * should do the right thing.
+ */
+#ifdef __ASSEMBLY__
+
+#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
+#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
+#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
+#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
+#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
+#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
+
+#else /* ! __ASSEMBLY__ */
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define ___opcode_swab32(x) swab32(x)
+#define ___opcode_swab16(x) swab16(x)
+#define ___opcode_swahb32(x) swahb32(x)
+#define ___opcode_swahw32(x) swahw32(x)
+#define ___opcode_identity32(x) ((u32)(x))
+#define ___opcode_identity16(x) ((u16)(x))
+
+#endif /* ! __ASSEMBLY__ */
+
+
+#ifdef CONFIG_CPU_ENDIAN_BE8
+
+#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
+#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
+
+#else /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+/*
+ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
+ * work in all cases, due to alignment constraints.  For now, a correct
+ * version is not provided for BE32.
+ */
+#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
+#endif
+
+#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
+#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
+#endif
+
+/* Operations specific to Thumb opcodes */
+
+/* Instruction size checks: */
+#define __opcode_is_thumb32(x) (		\
+	   ((x) & 0xF8000000) == 0xE8000000	\
+	|| ((x) & 0xF0000000) == 0xF0000000	\
+)
+#define __opcode_is_thumb16(x) (					\
+	   ((x) & 0xFFFF0000) == 0					\
+	&& !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000)	\
+)
+
+/* Operations to construct or split 32-bit Thumb instructions: */
+#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
+#define __opcode_thumb32_second(x) (___opcode_identity16(x))
+#define __opcode_thumb32_compose(first, second) (			\
+	  (___opcode_identity32(___opcode_identity16(first)) << 16)	\
+	| ___opcode_identity32(___opcode_identity16(second))		\
+)
+#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
+#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
+#define ___asm_opcode_thumb32_compose(first, second) (			    \
+	  (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
+	| ___asm_opcode_identity32(___asm_opcode_identity16(second))	    \
+)
+
+/*
+ * Opcode injection helpers
+ *
+ * In rare cases it is necessary to assemble an opcode which the
+ * assembler does not support directly, or which would normally be
+ * rejected because of the CFLAGS or AFLAGS used to build the affected
+ * file.
+ *
+ * Before using these macros, consider carefully whether it is feasible
+ * instead to change the build flags for your file, or whether it really
+ * makes sense to support old assembler versions when building that
+ * particular kernel feature.
+ *
+ * The macros defined here should only be used where there is no viable
+ * alternative.
+ *
+ *
+ * __inst_arm(x): emit the specified ARM opcode
+ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
+ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
+ *
+ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
+ *	16-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
+ *	32-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ *
+ * Note that using these macros directly is poor practice.  Instead, you
+ * should use them to define human-readable wrapper macros to encode the
+ * instructions that you care about.  In code which might run on ARMv7 or
+ * above, you can usually use the __inst_arm_thumb{16,32} macros to
+ * specify the ARM and Thumb alternatives at the same time.  This ensures
+ * that the correct opcode gets emitted depending on the instruction set
+ * used for the kernel build.
+ *
+ * Look at opcodes-virt.h for an example of how to use these macros.
+ */
+#include <linux/stringify.h>
+
+#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
+#define __inst_thumb32(x) ___inst_thumb32(				\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)),	\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x))	\
+)
+#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
+	__inst_thumb16(thumb_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
+	__inst_thumb32(thumb_opcode)
+#else
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#endif
+
+/* Helpers for the helpers.  Don't use these directly. */
+#ifdef __ASSEMBLY__
+#define ___inst_arm(x) .long x
+#define ___inst_thumb16(x) .short x
+#define ___inst_thumb32(first, second) .short first, second
+#else
+#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
+#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
+#define ___inst_thumb32(first, second) \
+	".short " __stringify(first) ", " __stringify(second) "\n\t"
+#endif
+
+#endif /* __ASM_ARM_OPCODES_H */
diff --git a/roms/u-boot/arch/arm/include/asm/pl310.h b/roms/u-boot/arch/arm/include/asm/pl310.h
new file mode 100644
index 000000000..f69e9e45f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/pl310.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ */
+#ifndef _PL310_H_
+#define _PL310_H_
+
+#include <linux/types.h>
+
+/* Register bit fields */
+#define PL310_AUX_CTRL_ASSOCIATIVITY_MASK	(1 << 16)
+#define L2X0_DYNAMIC_CLK_GATING_EN		(1 << 1)
+#define L2X0_STNDBY_MODE_EN			(1 << 0)
+#define L2X0_CTRL_EN				1
+
+#define L310_SHARED_ATT_OVERRIDE_ENABLE		(1 << 22)
+#define L310_AUX_CTRL_DATA_PREFETCH_MASK	(1 << 28)
+#define L310_AUX_CTRL_INST_PREFETCH_MASK	(1 << 29)
+#define L310_LATENCY_CTRL_SETUP(n)		((n) << 0)
+#define L310_LATENCY_CTRL_RD(n)			((n) << 4)
+#define L310_LATENCY_CTRL_WR(n)			((n) << 8)
+
+#define L2X0_CACHE_ID_PART_MASK     (0xf << 6)
+#define L2X0_CACHE_ID_PART_L310     (3 << 6)
+#define L2X0_CACHE_ID_RTL_MASK          0x3f
+#define L2X0_CACHE_ID_RTL_R3P2          0x8
+
+struct pl310_regs {
+	u32 pl310_cache_id;
+	u32 pl310_cache_type;
+	u32 pad1[62];
+	u32 pl310_ctrl;
+	u32 pl310_aux_ctrl;
+	u32 pl310_tag_latency_ctrl;
+	u32 pl310_data_latency_ctrl;
+	u32 pad2[60];
+	u32 pl310_event_cnt_ctrl;
+	u32 pl310_event_cnt1_cfg;
+	u32 pl310_event_cnt0_cfg;
+	u32 pl310_event_cnt1_val;
+	u32 pl310_event_cnt0_val;
+	u32 pl310_intr_mask;
+	u32 pl310_masked_intr_stat;
+	u32 pl310_raw_intr_stat;
+	u32 pl310_intr_clear;
+	u32 pad3[323];
+	u32 pl310_cache_sync;
+	u32 pad4[15];
+	u32 pl310_inv_line_pa;
+	u32 pad5[2];
+	u32 pl310_inv_way;
+	u32 pad6[12];
+	u32 pl310_clean_line_pa;
+	u32 pad7[1];
+	u32 pl310_clean_line_idx;
+	u32 pl310_clean_way;
+	u32 pad8[12];
+	u32 pl310_clean_inv_line_pa;
+	u32 pad9[1];
+	u32 pl310_clean_inv_line_idx;
+	u32 pl310_clean_inv_way;
+	u32 pad10[64];
+	u32 pl310_lockdown_dbase;
+	u32 pl310_lockdown_ibase;
+	u32 pad11[190];
+	u32 pl310_addr_filter_start;
+	u32 pl310_addr_filter_end;
+	u32 pad12[190];
+	u32 pl310_test_operation;
+	u32 pad13[3];
+	u32 pl310_line_data;
+	u32 pad14[7];
+	u32 pl310_line_tag;
+	u32 pad15[3];
+	u32 pl310_debug_ctrl;
+	u32 pad16[7];
+	u32 pl310_prefetch_ctrl;
+	u32 pad17[7];
+	u32 pl310_power_ctrl;
+};
+
+void pl310_inval_all(void);
+void pl310_clean_inval_all(void);
+void pl310_inval_range(u32 start, u32 end);
+void pl310_clean_inval_range(u32 start, u32 end);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/posix_types.h b/roms/u-boot/arch/arm/include/asm/posix_types.h
new file mode 100644
index 000000000..d254b95b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/posix_types.h
@@ -0,0 +1,87 @@
+/*
+ *  linux/include/asm-arm/posix_types.h
+ *
+ *  Copyright (C) 1996-1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ARCH_ARM_POSIX_TYPES_H
+#define __ARCH_ARM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short		__kernel_dev_t;
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned short		__kernel_uid_t;
+typedef unsigned short		__kernel_gid_t;
+
+#ifdef	__aarch64__
+typedef unsigned long		__kernel_size_t;
+typedef long			__kernel_ssize_t;
+typedef long			__kernel_ptrdiff_t;
+#else
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+#endif
+
+typedef long			__kernel_time_t;
+typedef long			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_daddr_t;
+typedef char *			__kernel_caddr_t;
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+typedef unsigned short		__kernel_old_uid_t;
+typedef unsigned short		__kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define __FD_SET(fd, fdsetp) \
+		(((fd_set *)fdsetp)->fds_bits[fd >> 5] |= (1<<(fd & 31)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd, fdsetp) \
+		(((fd_set *)fdsetp)->fds_bits[fd >> 5] &= ~(1<<(fd & 31)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fdsetp) \
+		((((fd_set *)fdsetp)->fds_bits[fd >> 5] & (1<<(fd & 31))) != 0)
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) \
+		(memset (fdsetp, 0, sizeof (*(fd_set *)fdsetp)))
+
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/proc-armv/domain.h b/roms/u-boot/arch/arm/include/asm/proc-armv/domain.h
new file mode 100644
index 000000000..aadc83187
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/proc-armv/domain.h
@@ -0,0 +1,50 @@
+/*
+ *  linux/include/asm-arm/proc-armv/domain.h
+ *
+ *  Copyright (C) 1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROC_DOMAIN_H
+#define __ASM_PROC_DOMAIN_H
+
+/*
+ * Domain numbers
+ *
+ *  DOMAIN_IO     - domain 2 includes all IO only
+ *  DOMAIN_KERNEL - domain 1 includes all kernel memory only
+ *  DOMAIN_USER   - domain 0 includes all user memory only
+ */
+#define DOMAIN_USER	0
+#define DOMAIN_KERNEL	1
+#define DOMAIN_TABLE	1
+#define DOMAIN_IO	2
+
+/*
+ * Domain types
+ */
+#define DOMAIN_NOACCESS	0
+#define DOMAIN_CLIENT	1
+#define DOMAIN_MANAGER	3
+
+#define domain_val(dom,type)	((type) << 2*(dom))
+
+#define set_domain(x)					\
+	do {						\
+	__asm__ __volatile__(				\
+	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
+	  : : "r" (x));					\
+	} while (0)
+
+#define modify_domain(dom,type)				\
+	do {						\
+	unsigned int domain = current->thread.domain;	\
+	domain &= ~domain_val(dom, DOMAIN_MANAGER);	\
+	domain |= domain_val(dom, type);		\
+	current->thread.domain = domain;		\
+	set_domain(current->thread.domain);		\
+	} while (0)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/proc-armv/processor.h b/roms/u-boot/arch/arm/include/asm/proc-armv/processor.h
new file mode 100644
index 000000000..532f2079e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/proc-armv/processor.h
@@ -0,0 +1,74 @@
+/*
+ *  linux/include/asm-arm/proc-armv/processor.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-09-1996	RMK	Created
+ *   26-09-1996	RMK	Added 'EXTRA_THREAD_STRUCT*'
+ *   28-09-1996	RMK	Moved start_thread into the processor dependencies
+ *   09-09-1998	PJB	Delete redundant `wp_works_ok'
+ *   30-05-1999	PJB	Save sl across context switches
+ *   31-07-1999	RMK	Added 'domain' stuff
+ */
+#ifndef __ASM_PROC_PROCESSOR_H
+#define __ASM_PROC_PROCESSOR_H
+
+#include <asm/proc-armv/domain.h>
+
+#define KERNEL_STACK_SIZE	PAGE_SIZE
+
+struct context_save_struct {
+	unsigned long cpsr;
+	unsigned long r4;
+	unsigned long r5;
+	unsigned long r6;
+	unsigned long r7;
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long sl;
+	unsigned long fp;
+	unsigned long pc;
+};
+
+#define INIT_CSS (struct context_save_struct){ SVC_MODE, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+
+#define EXTRA_THREAD_STRUCT						\
+	unsigned int	domain;
+
+#define EXTRA_THREAD_STRUCT_INIT					\
+	domain:	  domain_val(DOMAIN_USER, DOMAIN_CLIENT) |		\
+		  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |		\
+		  domain_val(DOMAIN_IO, DOMAIN_CLIENT)
+
+#define start_thread(regs,pc,sp)					\
+({									\
+	unsigned long *stack = (unsigned long *)sp;			\
+	set_fs(USER_DS);						\
+	memzero(regs->uregs, sizeof(regs->uregs));			\
+	if (current->personality & ADDR_LIMIT_32BIT)			\
+		regs->ARM_cpsr = USR_MODE;				\
+	else								\
+		regs->ARM_cpsr = USR26_MODE;				\
+	regs->ARM_pc = pc;		/* pc */			\
+	regs->ARM_sp = sp;		/* sp */			\
+	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
+	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
+	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
+})
+
+#define KSTK_EIP(tsk)	(((unsigned long *)(4096+(unsigned long)(tsk)))[1019])
+#define KSTK_ESP(tsk)	(((unsigned long *)(4096+(unsigned long)(tsk)))[1017])
+
+/* Allocation and freeing of basic task resources. */
+/*
+ * NOTE! The task struct and the stack go together
+ */
+#define ll_alloc_task_struct() ((struct task_struct *) __get_free_pages(GFP_KERNEL,1))
+#define ll_free_task_struct(p) free_pages((unsigned long)(p),1)
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/proc-armv/ptrace.h b/roms/u-boot/arch/arm/include/asm/proc-armv/ptrace.h
new file mode 100644
index 000000000..e37ad8fd1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/proc-armv/ptrace.h
@@ -0,0 +1,131 @@
+/*
+ *  linux/include/asm-arm/proc-armv/ptrace.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROC_PTRACE_H
+#define __ASM_PROC_PTRACE_H
+
+#ifdef CONFIG_ARM64
+
+#define PCMASK		0
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored
+ * on the stack during an exception.
+ */
+struct pt_regs {
+	unsigned long elr;
+	unsigned long regs[31];
+};
+
+#endif	/* __ASSEMBLY__ */
+
+#else	/* CONFIG_ARM64 */
+
+#define USR26_MODE	0x00
+#define FIQ26_MODE	0x01
+#define IRQ26_MODE	0x02
+#define SVC26_MODE	0x03
+#define USR_MODE	0x10
+#define FIQ_MODE	0x11
+#define IRQ_MODE	0x12
+#define SVC_MODE	0x13
+#define MON_MODE	0x16
+#define ABT_MODE	0x17
+#define HYP_MODE	0x1a
+#define UND_MODE	0x1b
+#define SYSTEM_MODE	0x1f
+#define MODE_MASK	0x1f
+#define T_BIT		0x20
+#define F_BIT		0x40
+#define I_BIT		0x80
+#define A_BIT		0x100
+#define CC_V_BIT	(1 << 28)
+#define CC_C_BIT	(1 << 29)
+#define CC_Z_BIT	(1 << 30)
+#define CC_N_BIT	(1 << 31)
+#define PCMASK		0
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long uregs[18];
+};
+
+#define ARM_cpsr	uregs[16]
+#define ARM_pc		uregs[15]
+#define ARM_lr		uregs[14]
+#define ARM_sp		uregs[13]
+#define ARM_ip		uregs[12]
+#define ARM_fp		uregs[11]
+#define ARM_r10		uregs[10]
+#define ARM_r9		uregs[9]
+#define ARM_r8		uregs[8]
+#define ARM_r7		uregs[7]
+#define ARM_r6		uregs[6]
+#define ARM_r5		uregs[5]
+#define ARM_r4		uregs[4]
+#define ARM_r3		uregs[3]
+#define ARM_r2		uregs[2]
+#define ARM_r1		uregs[1]
+#define ARM_r0		uregs[0]
+#define ARM_ORIG_r0	uregs[17]
+
+#ifdef __KERNEL__
+
+#define user_mode(regs)	\
+	(((regs)->ARM_cpsr & 0xf) == 0)
+
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+#define thumb_mode(regs) \
+	(((regs)->ARM_cpsr & T_BIT))
+#else
+#define thumb_mode(regs) (0)
+#endif
+
+#define processor_mode(regs) \
+	((regs)->ARM_cpsr & MODE_MASK)
+
+#define interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & F_BIT))
+
+#define condition_codes(regs) \
+	((regs)->ARM_cpsr & (CC_V_BIT|CC_C_BIT|CC_Z_BIT|CC_N_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+	if ((regs->ARM_cpsr & 0xf) == 0 &&
+	    (regs->ARM_cpsr & (F_BIT|I_BIT)) == 0)
+		return 1;
+
+	/*
+	 * Force CPSR to something logical...
+	 */
+	regs->ARM_cpsr &= (CC_V_BIT|CC_C_BIT|CC_Z_BIT|CC_N_BIT|0x10);
+
+	return 0;
+}
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* CONFIG_ARM64 */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/proc-armv/system.h b/roms/u-boot/arch/arm/include/asm/proc-armv/system.h
new file mode 100644
index 000000000..c61374e9f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/proc-armv/system.h
@@ -0,0 +1,224 @@
+/*
+ *  linux/include/asm-arm/proc-armv/system.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROC_SYSTEM_H
+#define __ASM_PROC_SYSTEM_H
+
+/*
+ * Save the current interrupt enable state & disable IRQs
+ */
+#ifdef CONFIG_ARM64
+
+/*
+ * Save the current interrupt enable state
+ * and disable IRQs/FIQs
+ */
+#define local_irq_save(flags)					\
+	({							\
+	asm volatile(						\
+	"mrs	%0, daif\n"					\
+	"msr	daifset, #3"					\
+	: "=r" (flags)						\
+	:							\
+	: "memory");						\
+	})
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(flags)				\
+	({							\
+	asm volatile(						\
+	"msr	daif, %0"					\
+	:							\
+	: "r" (flags)						\
+	: "memory");						\
+	})
+
+/*
+ * Enable IRQs/FIQs
+ */
+#define local_irq_enable()					\
+	({							\
+	asm volatile(						\
+	"msr	daifclr, #3"					\
+	:							\
+	:							\
+	: "memory");						\
+	})
+
+/*
+ * Disable IRQs/FIQs
+ */
+#define local_irq_disable()					\
+	({							\
+	asm volatile(						\
+	"msr	daifset, #3"					\
+	:							\
+	:							\
+	: "memory");						\
+	})
+
+#else	/* CONFIG_ARM64 */
+
+#define local_irq_save(x)					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_save\n"	\
+"	orr	%1, %0, #128\n"					\
+"	msr	cpsr_c, %1"					\
+	: "=r" (x), "=r" (temp)					\
+	:							\
+	: "memory");						\
+	})
+
+/*
+ * Enable IRQs
+ */
+#define local_irq_enable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_enable\n"	\
+"	bic	%0, %0, #128\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory");						\
+	})
+
+/*
+ * Disable IRQs
+ */
+#define local_irq_disable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_disable\n"	\
+"	orr	%0, %0, #128\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory");						\
+	})
+
+/*
+ * Enable FIQs
+ */
+#define __stf()							\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ stf\n"		\
+"	bic	%0, %0, #64\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory");						\
+	})
+
+/*
+ * Disable FIQs
+ */
+#define __clf()							\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ clf\n"		\
+"	orr	%0, %0, #64\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory");						\
+	})
+
+/*
+ * Save the current interrupt enable state.
+ */
+#define local_save_flags(x)					\
+	({							\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_save_flags\n"	\
+	  : "=r" (x)						\
+	  :							\
+	  : "memory");						\
+	})
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(x)					\
+	__asm__ __volatile__(					\
+	"msr	cpsr_c, %0		@ local_irq_restore\n"	\
+	:							\
+	: "r" (x)						\
+	: "memory")
+
+#endif	/* CONFIG_ARM64 */
+
+#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) || \
+	defined(CONFIG_ARM64)
+/*
+ * On the StrongARM, "swp" is terminally broken since it bypasses the
+ * cache totally.  This means that the cache becomes inconsistent, and,
+ * since we use normal loads/stores as well, this is really bad.
+ * Typically, this causes oopsen in filp_close, but could have other,
+ * more disasterous effects.  There are two work-arounds:
+ *  1. Disable interrupts and emulate the atomic swap
+ *  2. Clean the cache, perform atomic swap, flush the cache
+ *
+ * We choose (1) since its the "easiest" to achieve here and is not
+ * dependent on the processor type.
+ */
+#define swp_is_buggy
+#endif
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	extern void __bad_xchg(volatile void *, int);
+	unsigned long ret;
+#ifdef swp_is_buggy
+	unsigned long flags;
+#endif
+
+	switch (size) {
+#ifdef swp_is_buggy
+		case 1:
+			local_irq_save(flags);
+			ret = *(volatile unsigned char *)ptr;
+			*(volatile unsigned char *)ptr = x;
+			local_irq_restore(flags);
+			break;
+
+		case 4:
+			local_irq_save(flags);
+			ret = *(volatile unsigned long *)ptr;
+			*(volatile unsigned long *)ptr = x;
+			local_irq_restore(flags);
+			break;
+#else
+		case 1:	__asm__ __volatile__ ("swpb %0, %1, [%2]"
+					: "=&r" (ret)
+					: "r" (x), "r" (ptr)
+					: "memory");
+			break;
+		case 4:	__asm__ __volatile__ ("swp %0, %1, [%2]"
+					: "=&r" (ret)
+					: "r" (x), "r" (ptr)
+					: "memory");
+			break;
+#endif
+		default: __bad_xchg(ptr, size), ret = 0;
+	}
+
+	return ret;
+}
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/processor.h b/roms/u-boot/arch/arm/include/asm/processor.h
new file mode 100644
index 000000000..83481c6cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/processor.h
@@ -0,0 +1,134 @@
+/*
+ *  linux/include/asm-arm/processor.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_PROCESSOR_H
+#define __ASM_ARM_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#define FP_SIZE 35
+
+struct fp_hard_struct {
+	unsigned int save[FP_SIZE];		/* as yet undefined */
+};
+
+struct fp_soft_struct {
+	unsigned int save[FP_SIZE];		/* undefined information */
+};
+
+union fp_state {
+	struct fp_hard_struct	hard;
+	struct fp_soft_struct	soft;
+};
+
+typedef unsigned long mm_segment_t;		/* domain register	*/
+
+#ifdef __KERNEL__
+
+#define EISA_bus 0
+#define MCA_bus 0
+#define MCA_bus__is_a_macro
+
+#include <asm/atomic.h>
+#include <asm/ptrace.h>
+#if 0	/* XXX###XXX */
+#include <asm/arch/memory.h>
+#endif	/* XXX###XXX */
+#include <asm/proc-armv/processor.h>
+#include <asm/types.h>
+
+union debug_insn {
+	u32	arm;
+	u16	thumb;
+};
+
+struct debug_entry {
+	u32			address;
+	union debug_insn	insn;
+};
+
+struct debug_info {
+	int			nsaved;
+	struct debug_entry	bp[2];
+};
+
+struct thread_struct {
+	atomic_t			refcount;
+							/* fault info	  */
+	unsigned long			address;
+	unsigned long			trap_no;
+	unsigned long			error_code;
+							/* floating point */
+	union fp_state			fpstate;
+							/* debugging	  */
+	struct debug_info		debug;
+							/* context info	  */
+	struct context_save_struct	*save;
+	EXTRA_THREAD_STRUCT
+};
+
+#define INIT_THREAD  {					\
+	refcount:	ATOMIC_INIT(1),			\
+	EXTRA_THREAD_STRUCT_INIT			\
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+static inline unsigned long thread_saved_pc(struct thread_struct *t)
+{
+	return t->save ? pc_pointer(t->save->pc) : 0;
+}
+
+static inline unsigned long thread_saved_fp(struct thread_struct *t)
+{
+	return t->save ? t->save->fp : 0;
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(tsk, mm)		do { } while (0)
+#define release_segments(mm)		do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define THREAD_SIZE	(8192)
+
+extern struct task_struct *alloc_task_struct(void);
+extern void __free_task_struct(struct task_struct *);
+#define get_task_struct(p)	atomic_inc(&(p)->thread.refcount)
+#define free_task_struct(p)					\
+ do {								\
+	if (atomic_dec_and_test(&(p)->thread.refcount))		\
+		__free_task_struct((p));			\
+ } while (0)
+
+#define init_task	(init_task_union.task)
+#define init_stack	(init_task_union.stack)
+
+#define cpu_relax()	barrier()
+
+/*
+ * Create a new kernel thread
+ */
+extern int arch_kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#endif
+
+#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/roms/u-boot/arch/arm/include/asm/psci.h b/roms/u-boot/arch/arm/include/asm/psci.h
new file mode 100644
index 000000000..67e923406
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/psci.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_PSCI_H__
+#define __ARM_PSCI_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define ARM_PSCI_VER_1_0		(0x00010000)
+#define ARM_PSCI_VER_0_2		(0x00000002)
+
+/* PSCI 0.1 interface */
+#define ARM_PSCI_FN_BASE		0x95c1ba5e
+#define ARM_PSCI_FN(n)			(ARM_PSCI_FN_BASE + (n))
+
+#define ARM_PSCI_FN_CPU_SUSPEND		ARM_PSCI_FN(0)
+#define ARM_PSCI_FN_CPU_OFF		ARM_PSCI_FN(1)
+#define ARM_PSCI_FN_CPU_ON		ARM_PSCI_FN(2)
+#define ARM_PSCI_FN_MIGRATE		ARM_PSCI_FN(3)
+
+#define ARM_PSCI_RET_SUCCESS		0
+#define ARM_PSCI_RET_NI			(-1)
+#define ARM_PSCI_RET_INVAL		(-2)
+#define ARM_PSCI_RET_DENIED		(-3)
+#define ARM_PSCI_RET_ALREADY_ON		(-4)
+#define ARM_PSCI_RET_ON_PENDING		(-5)
+#define ARM_PSCI_RET_INTERNAL_FAILURE	(-6)
+#define ARM_PSCI_RET_NOT_PRESENT	(-7)
+#define ARM_PSCI_RET_DISABLED		(-8)
+#define ARM_PSCI_RET_INVALID_ADDRESS	(-9)
+
+/* PSCI 0.2 interface */
+#define ARM_PSCI_0_2_FN_BASE			0x84000000
+#define ARM_PSCI_0_2_FN(n)			(ARM_PSCI_0_2_FN_BASE + (n))
+
+#define ARM_PSCI_0_2_FN64_BASE			0xC4000000
+#define ARM_PSCI_0_2_FN64(n)			(ARM_PSCI_0_2_FN64_BASE + (n))
+
+#define ARM_PSCI_0_2_FN_PSCI_VERSION		ARM_PSCI_0_2_FN(0)
+#define ARM_PSCI_0_2_FN_CPU_SUSPEND		ARM_PSCI_0_2_FN(1)
+#define ARM_PSCI_0_2_FN_CPU_OFF			ARM_PSCI_0_2_FN(2)
+#define ARM_PSCI_0_2_FN_CPU_ON			ARM_PSCI_0_2_FN(3)
+#define ARM_PSCI_0_2_FN_AFFINITY_INFO		ARM_PSCI_0_2_FN(4)
+#define ARM_PSCI_0_2_FN_MIGRATE			ARM_PSCI_0_2_FN(5)
+#define ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE	ARM_PSCI_0_2_FN(6)
+#define ARM_PSCI_0_2_FN_MIGRATE_INFO_UP_CPU	ARM_PSCI_0_2_FN(7)
+#define ARM_PSCI_0_2_FN_SYSTEM_OFF		ARM_PSCI_0_2_FN(8)
+#define ARM_PSCI_0_2_FN_SYSTEM_RESET		ARM_PSCI_0_2_FN(9)
+
+#define ARM_PSCI_0_2_FN64_CPU_SUSPEND		ARM_PSCI_0_2_FN64(1)
+#define ARM_PSCI_0_2_FN64_CPU_ON		ARM_PSCI_0_2_FN64(3)
+#define ARM_PSCI_0_2_FN64_AFFINITY_INFO		ARM_PSCI_0_2_FN64(4)
+#define ARM_PSCI_0_2_FN64_MIGRATE		ARM_PSCI_0_2_FN64(5)
+#define ARM_PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU	ARM_PSCI_0_2_FN64(7)
+#define ARM_PSCI_0_2_FN64_SYSTEM_RESET2		ARM_PSCI_0_2_FN64(18)
+
+/* PSCI 1.0 interface */
+#define ARM_PSCI_1_0_FN_PSCI_FEATURES		ARM_PSCI_0_2_FN(10)
+#define ARM_PSCI_1_0_FN_CPU_FREEZE		ARM_PSCI_0_2_FN(11)
+#define ARM_PSCI_1_0_FN_CPU_DEFAULT_SUSPEND	ARM_PSCI_0_2_FN(12)
+#define ARM_PSCI_1_0_FN_NODE_HW_STATE		ARM_PSCI_0_2_FN(13)
+#define ARM_PSCI_1_0_FN_SYSTEM_SUSPEND		ARM_PSCI_0_2_FN(14)
+#define ARM_PSCI_1_0_FN_SET_SUSPEND_MODE	ARM_PSCI_0_2_FN(15)
+#define ARM_PSCI_1_0_FN_STAT_RESIDENCY		ARM_PSCI_0_2_FN(16)
+#define ARM_PSCI_1_0_FN_STAT_COUNT		ARM_PSCI_0_2_FN(17)
+
+#define ARM_PSCI_1_0_FN64_CPU_DEFAULT_SUSPEND	ARM_PSCI_0_2_FN64(12)
+#define ARM_PSCI_1_0_FN64_NODE_HW_STATE		ARM_PSCI_0_2_FN64(13)
+#define ARM_PSCI_1_0_FN64_SYSTEM_SUSPEND	ARM_PSCI_0_2_FN64(14)
+#define ARM_PSCI_1_0_FN64_STAT_RESIDENCY	ARM_PSCI_0_2_FN64(16)
+#define ARM_PSCI_1_0_FN64_STAT_COUNT		ARM_PSCI_0_2_FN64(17)
+
+/* 1KB stack per core */
+#define ARM_PSCI_STACK_SHIFT	10
+#define ARM_PSCI_STACK_SIZE	(1 << ARM_PSCI_STACK_SHIFT)
+
+/* PSCI affinity level state returned by AFFINITY_INFO */
+#define PSCI_AFFINITY_LEVEL_ON		0
+#define PSCI_AFFINITY_LEVEL_OFF		1
+#define PSCI_AFFINITY_LEVEL_ON_PENDING	2
+
+#define PSCI_RESET2_TYPE_VENDOR_SHIFT	31
+#define PSCI_RESET2_TYPE_VENDOR		BIT(PSCI_RESET2_TYPE_VENDOR_SHIFT)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <linux/bitops.h>
+
+/* These 3 helper functions assume cpu < CONFIG_ARMV7_PSCI_NR_CPUS */
+u32 psci_get_target_pc(int cpu);
+u32 psci_get_context_id(int cpu);
+void psci_save(int cpu, u32 pc, u32 context_id);
+
+void psci_cpu_entry(void);
+u32 psci_get_cpu_id(void);
+void psci_cpu_off_common(void);
+
+int psci_update_dt(void *fdt);
+void psci_board_init(void);
+int fdt_psci(void *fdt);
+
+void psci_v7_flush_dcache_all(void);
+#endif /* ! __ASSEMBLY__ */
+
+#endif /* __ARM_PSCI_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/ptrace.h b/roms/u-boot/arch/arm/include/asm/ptrace.h
new file mode 100644
index 000000000..a836f6cc6
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ptrace.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_ARM_PTRACE_H
+#define __ASM_ARM_PTRACE_H
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+
+#define PTRACE_SETOPTIONS	21
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD	0x00000001
+
+#include <asm/proc-armv/ptrace.h>
+
+#ifndef __ASSEMBLY__
+#define pc_pointer(v) \
+	((v) & ~PCMASK)
+
+#define instruction_pointer(regs) \
+	(pc_pointer((regs)->ARM_pc))
+
+#ifdef __KERNEL__
+extern void show_regs(struct pt_regs *);
+
+#define predicate(x)	(x & 0xf0000000)
+#define PREDICATE_ALWAYS	0xe0000000
+
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/sections.h b/roms/u-boot/arch/arm/include/asm/sections.h
new file mode 100644
index 000000000..dff3bc260
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/sections.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ */
+
+#ifndef __ASM_ARM_SECTIONS_H
+#define __ASM_ARM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/secure.h b/roms/u-boot/arch/arm/include/asm/secure.h
new file mode 100644
index 000000000..c7b00be8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/secure.h
@@ -0,0 +1,61 @@
+#ifndef __ASM_SECURE_H
+#define __ASM_SECURE_H
+
+#include <config.h>
+#include <asm/global_data.h>
+
+#define __secure __section("._secure.text")
+#define __secure_data __section("._secure.data")
+
+#ifndef __ASSEMBLY__
+
+typedef struct secure_svc_tbl {
+	u32	id;
+#ifdef CONFIG_ARMV8_PSCI
+	u8	pad[4];
+#endif
+	void	*func;
+} secure_svc_tbl_t;
+
+/*
+ * Macro to declare a SiP function service in '_secure_svc_tbl_entries' section
+ */
+#define DECLARE_SECURE_SVC(_name, _id, _fn) \
+	static const secure_svc_tbl_t __secure_svc_ ## _name \
+		__used __section("._secure_svc_tbl_entries") \
+			 = { \
+				.id = _id, \
+				.func = _fn }
+
+#else
+
+#ifdef CONFIG_ARMV8_PSCI
+#define SECURE_SVC_TBL_OFFSET		16
+#else
+#define SECURE_SVC_TBL_OFFSET		8
+
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_ARMV7_SECURE_BASE) || defined(CONFIG_ARMV8_SECURE_BASE)
+/*
+ * Warning, horror ahead.
+ *
+ * The target code lives in our "secure ram", but u-boot doesn't know
+ * that, and has blindly added reloc_off to every relocation
+ * entry. Gahh. Do the opposite conversion. This hack also prevents
+ * GCC from generating code veeners, which u-boot doesn't relocate at
+ * all...
+ */
+#define secure_ram_addr(_fn) ({						\
+			DECLARE_GLOBAL_DATA_PTR;			\
+			void *__fn = _fn;				\
+			typeof(_fn) *__tmp = (__fn - gd->reloc_off);	\
+			__tmp;						\
+		})
+#else
+#define secure_ram_addr(_fn)	(_fn)
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/setjmp.h b/roms/u-boot/arch/arm/include/asm/setjmp.h
new file mode 100644
index 000000000..662bec863
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/setjmp.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ * (C) Copyright 2016 Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef _SETJMP_H_
+#define _SETJMP_H_	1
+
+/*
+ * This really should be opaque, but the EFI implementation wrongly
+ * assumes that a 'struct jmp_buf_data' is defined.
+ */
+struct jmp_buf_data {
+#if defined(__aarch64__)
+	u64  regs[13];
+#else
+	u32  regs[10];  /* r4-r9, sl, fp, sp, lr */
+#endif
+};
+
+typedef struct jmp_buf_data jmp_buf[1];
+
+int setjmp(jmp_buf jmp);
+void longjmp(jmp_buf jmp, int ret);
+
+#endif /* _SETJMP_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/setup.h b/roms/u-boot/arch/arm/include/asm/setup.h
new file mode 100644
index 000000000..e0e2d7e36
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/setup.h
@@ -0,0 +1,274 @@
+/*
+ *  linux/include/asm/setup.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Structure passed to kernel to tell it about the
+ *  hardware it's running on.  See linux/Documentation/arm/Setup
+ *  for more info.
+ *
+ * NOTE:
+ *  This file contains two ways to pass information from the boot
+ *  loader to the kernel. The old struct param_struct is deprecated,
+ *  but it will be kept in the kernel for 5 years from now
+ *  (2001). This will allow boot loaders to convert to the new struct
+ *  tag way.
+ */
+#ifndef __ASMARM_SETUP_H
+#define __ASMARM_SETUP_H
+
+/*
+ * Usage:
+ *  - do not go blindly adding fields, add them at the end
+ *  - when adding fields, don't rely on the address until
+ *    a patch from me has been released
+ *  - unused fields should be zero (for future expansion)
+ *  - this structure is relatively short-lived - only
+ *    guaranteed to contain useful data in setup_arch()
+ */
+#define COMMAND_LINE_SIZE 1024
+
+/* This is the old deprecated way to pass parameters to the kernel */
+struct param_struct {
+    union {
+	struct {
+	    unsigned long page_size;		/*  0 */
+	    unsigned long nr_pages;		/*  4 */
+	    unsigned long ramdisk_size;		/*  8 */
+	    unsigned long flags;		/* 12 */
+#define FLAG_READONLY	1
+#define FLAG_RDLOAD	4
+#define FLAG_RDPROMPT	8
+	    unsigned long rootdev;		/* 16 */
+	    unsigned long video_num_cols;	/* 20 */
+	    unsigned long video_num_rows;	/* 24 */
+	    unsigned long video_x;		/* 28 */
+	    unsigned long video_y;		/* 32 */
+	    unsigned long memc_control_reg;	/* 36 */
+	    unsigned char sounddefault;		/* 40 */
+	    unsigned char adfsdrives;		/* 41 */
+	    unsigned char bytes_per_char_h;	/* 42 */
+	    unsigned char bytes_per_char_v;	/* 43 */
+	    unsigned long pages_in_bank[4];	/* 44 */
+	    unsigned long pages_in_vram;	/* 60 */
+	    unsigned long initrd_start;		/* 64 */
+	    unsigned long initrd_size;		/* 68 */
+	    unsigned long rd_start;		/* 72 */
+	    unsigned long system_rev;		/* 76 */
+	    unsigned long system_serial_low;	/* 80 */
+	    unsigned long system_serial_high;	/* 84 */
+	    unsigned long mem_fclk_21285;       /* 88 */
+	} s;
+	char unused[256];
+    } u1;
+    union {
+	char paths[8][128];
+	struct {
+	    unsigned long magic;
+	    char n[1024 - sizeof(unsigned long)];
+	} s;
+    } u2;
+    char commandline[COMMAND_LINE_SIZE];
+};
+
+
+/*
+ * The new way of passing information: a list of tagged entries
+ */
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	u32 size;
+	u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	u32 flags;		/* bit 0 = read-only */
+	u32 pagesize;
+	u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+
+struct tag_mem32 {
+	u32	size;
+	u32	start;	/* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT	0x54410003
+
+struct tag_videotext {
+	u8		x;
+	u8		y;
+	u16		video_page;
+	u8		video_mode;
+	u8		video_cols;
+	u16		video_ega_bx;
+	u8		video_lines;
+	u8		video_isvga;
+	u16		video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK	0x54410004
+
+struct tag_ramdisk {
+	u32 flags;	/* bit 0 = load, bit 1 = prompt */
+	u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
+	u32 start;	/* starting block of floppy-based RAM disk image */
+};
+
+/* describes where the compressed ramdisk image lives (virtual address) */
+/*
+ * this one accidentally used virtual addresses - as such,
+ * it's deprecated.
+ */
+#define ATAG_INITRD	0x54410005
+
+/* describes where the compressed ramdisk image lives (physical address) */
+#define ATAG_INITRD2	0x54420005
+
+struct tag_initrd {
+	u32 start;	/* physical start address */
+	u32 size;	/* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL	0x54410006
+
+struct tag_serialnr {
+	u32 low;
+	u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION	0x54410007
+
+struct tag_revision {
+	u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB	0x54410008
+
+struct tag_videolfb {
+	u16		lfb_width;
+	u16		lfb_height;
+	u16		lfb_depth;
+	u16		lfb_linelength;
+	u32		lfb_base;
+	u32		lfb_size;
+	u8		red_size;
+	u8		red_pos;
+	u8		green_size;
+	u8		green_pos;
+	u8		blue_size;
+	u8		blue_pos;
+	u8		rsvd_size;
+	u8		rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410009
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* acorn RiscPC specific information */
+#define ATAG_ACORN	0x41000101
+
+struct tag_acorn {
+	u32 memc_control_reg;
+	u32 vram_pages;
+	u8 sounddefault;
+	u8 adfsdrives;
+};
+
+/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+#define ATAG_MEMCLK	0x41000402
+
+struct tag_memclk {
+	u32 fmemclk;
+};
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core		core;
+		struct tag_mem32	mem;
+		struct tag_videotext	videotext;
+		struct tag_ramdisk	ramdisk;
+		struct tag_initrd	initrd;
+		struct tag_serialnr	serialnr;
+		struct tag_revision	revision;
+		struct tag_videolfb	videolfb;
+		struct tag_cmdline	cmdline;
+
+		/*
+		 * Acorn specific
+		 */
+		struct tag_acorn	acorn;
+
+		/*
+		 * DC21285 specific
+		 */
+		struct tag_memclk	memclk;
+	} u;
+};
+
+struct tagtable {
+	u32 tag;
+	int (*parse)(const struct tag *);
+};
+
+#define __tag __attribute__((unused)) __section(".taglist")
+#define __tagtable(tag, fn) \
+static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+#define tag_member_present(tag,member)				\
+	((unsigned long)(&((struct tag *)0L)->member + 1)	\
+		<= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)		\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+/*
+ * Memory map description
+ */
+#define NR_BANKS 8
+
+struct meminfo {
+	int nr_banks;
+	unsigned long end;
+	struct {
+		unsigned long start;
+		unsigned long size;
+		int           node;
+	} bank[NR_BANKS];
+};
+
+extern struct meminfo meminfo;
+
+#endif
+
+/*
+ * Board specified tags
+ */
+void setup_board_tags(struct tag **in_params);
diff --git a/roms/u-boot/arch/arm/include/asm/spin_table.h b/roms/u-boot/arch/arm/include/asm/spin_table.h
new file mode 100644
index 000000000..dec18c6e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/spin_table.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __ASM_SPIN_TABLE_H__
+#define __ASM_SPIN_TABLE_H__
+
+extern u64 spin_table_cpu_release_addr;
+extern char spin_table_reserve_begin;
+extern char spin_table_reserve_end;
+
+int spin_table_update_dt(void *fdt);
+
+#endif /* __ASM_SPIN_TABLE_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/spl.h b/roms/u-boot/arch/arm/include/asm/spl.h
new file mode 100644
index 000000000..e568af256
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/spl.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef	_ASM_SPL_H_
+#define	_ASM_SPL_H_
+
+#if defined(CONFIG_ARCH_OMAP2PLUS) \
+	|| defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \
+	|| defined(CONFIG_EXYNOS4210) || defined(CONFIG_ARCH_K3)
+/* Platform-specific defines */
+#include <asm/arch/spl.h>
+
+#else
+enum {
+	BOOT_DEVICE_RAM,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_MMC2_2,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_NOR,
+	BOOT_DEVICE_UART,
+	BOOT_DEVICE_SPI,
+	BOOT_DEVICE_USB,
+	BOOT_DEVICE_SATA,
+	BOOT_DEVICE_I2C,
+	BOOT_DEVICE_BOARD,
+	BOOT_DEVICE_DFU,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_BOOTROM,
+	BOOT_DEVICE_NONE
+};
+#endif
+
+/* Linker symbols. */
+extern char __bss_start[], __bss_end[];
+
+#ifndef CONFIG_DM
+extern gd_t gdata;
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/string.h b/roms/u-boot/arch/arm/include/asm/string.h
new file mode 100644
index 000000000..11eaa34fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/string.h
@@ -0,0 +1,53 @@
+#ifndef __ASM_ARM_STRING_H
+#define __ASM_ARM_STRING_H
+
+#include <config.h>
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+
+#undef __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#undef __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#if CONFIG_IS_ENABLED(USE_ARCH_MEMCPY)
+#define __HAVE_ARCH_MEMCPY
+#endif
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMZERO
+#if CONFIG_IS_ENABLED(USE_ARCH_MEMSET)
+#define __HAVE_ARCH_MEMSET
+#endif
+extern void * memset(void *, int, __kernel_size_t);
+
+#if 0
+extern void __memzero(void *ptr, __kernel_size_t n);
+
+#define memset(p,v,n)							\
+	({								\
+		if ((n) != 0) {						\
+			if (__builtin_constant_p((v)) && (v) == 0)	\
+				__memzero((p),(n));			\
+			else						\
+				memset((p),(v),(n));			\
+		}							\
+		(p);							\
+	})
+
+#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
+#else
+extern void memzero(void *ptr, __kernel_size_t n);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/system.h b/roms/u-boot/arch/arm/include/asm/system.h
new file mode 100644
index 000000000..11fceec4d
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/system.h
@@ -0,0 +1,634 @@
+#ifndef __ASM_ARM_SYSTEM_H
+#define __ASM_ARM_SYSTEM_H
+
+#include <linux/compiler.h>
+#include <asm/barriers.h>
+
+#ifdef CONFIG_ARM64
+
+/*
+ * SCTLR_EL1/SCTLR_EL2/SCTLR_EL3 bits definitions
+ */
+#define CR_M		(1 << 0)	/* MMU enable			*/
+#define CR_A		(1 << 1)	/* Alignment abort enable	*/
+#define CR_C		(1 << 2)	/* Dcache enable		*/
+#define CR_SA		(1 << 3)	/* Stack Alignment Check Enable	*/
+#define CR_I		(1 << 12)	/* Icache enable		*/
+#define CR_WXN		(1 << 19)	/* Write Permision Imply XN	*/
+#define CR_EE		(1 << 25)	/* Exception (Big) Endian	*/
+
+#define ES_TO_AARCH64		1
+#define ES_TO_AARCH32		0
+
+/*
+ * SCR_EL3 bits definitions
+ */
+#define SCR_EL3_RW_AARCH64	(1 << 10) /* Next lower level is AArch64     */
+#define SCR_EL3_RW_AARCH32	(0 << 10) /* Lower lowers level are AArch32  */
+#define SCR_EL3_HCE_EN		(1 << 8)  /* Hypervisor Call enable          */
+#define SCR_EL3_SMD_DIS		(1 << 7)  /* Secure Monitor Call disable     */
+#define SCR_EL3_RES1		(3 << 4)  /* Reserved, RES1                  */
+#define SCR_EL3_EA_EN		(1 << 3)  /* External aborts taken to EL3    */
+#define SCR_EL3_NS_EN		(1 << 0)  /* EL0 and EL1 in Non-scure state  */
+
+/*
+ * SPSR_EL3/SPSR_EL2 bits definitions
+ */
+#define SPSR_EL_END_LE		(0 << 9)  /* Exception Little-endian          */
+#define SPSR_EL_DEBUG_MASK	(1 << 9)  /* Debug exception masked           */
+#define SPSR_EL_ASYN_MASK	(1 << 8)  /* Asynchronous data abort masked   */
+#define SPSR_EL_SERR_MASK	(1 << 8)  /* System Error exception masked    */
+#define SPSR_EL_IRQ_MASK	(1 << 7)  /* IRQ exception masked             */
+#define SPSR_EL_FIQ_MASK	(1 << 6)  /* FIQ exception masked             */
+#define SPSR_EL_T_A32		(0 << 5)  /* AArch32 instruction set A32      */
+#define SPSR_EL_M_AARCH64	(0 << 4)  /* Exception taken from AArch64     */
+#define SPSR_EL_M_AARCH32	(1 << 4)  /* Exception taken from AArch32     */
+#define SPSR_EL_M_SVC		(0x3)     /* Exception taken from SVC mode    */
+#define SPSR_EL_M_HYP		(0xa)     /* Exception taken from HYP mode    */
+#define SPSR_EL_M_EL1H		(5)       /* Exception taken from EL1h mode   */
+#define SPSR_EL_M_EL2H		(9)       /* Exception taken from EL2h mode   */
+
+/*
+ * CPTR_EL2 bits definitions
+ */
+#define CPTR_EL2_RES1		(3 << 12 | 0x3ff)           /* Reserved, RES1 */
+
+/*
+ * SCTLR_EL2 bits definitions
+ */
+#define SCTLR_EL2_RES1		(3 << 28 | 3 << 22 | 1 << 18 | 1 << 16 |\
+				 1 << 11 | 3 << 4)	    /* Reserved, RES1 */
+#define SCTLR_EL2_EE_LE		(0 << 25) /* Exception Little-endian          */
+#define SCTLR_EL2_WXN_DIS	(0 << 19) /* Write permission is not XN       */
+#define SCTLR_EL2_ICACHE_DIS	(0 << 12) /* Instruction cache disabled       */
+#define SCTLR_EL2_SA_DIS	(0 << 3)  /* Stack Alignment Check disabled   */
+#define SCTLR_EL2_DCACHE_DIS	(0 << 2)  /* Data cache disabled              */
+#define SCTLR_EL2_ALIGN_DIS	(0 << 1)  /* Alignment check disabled         */
+#define SCTLR_EL2_MMU_DIS	(0)       /* MMU disabled                     */
+
+/*
+ * CNTHCTL_EL2 bits definitions
+ */
+#define CNTHCTL_EL2_EL1PCEN_EN	(1 << 1)  /* Physical timer regs accessible   */
+#define CNTHCTL_EL2_EL1PCTEN_EN	(1 << 0)  /* Physical counter accessible      */
+
+/*
+ * HCR_EL2 bits definitions
+ */
+#define HCR_EL2_RW_AARCH64	(1 << 31) /* EL1 is AArch64                   */
+#define HCR_EL2_RW_AARCH32	(0 << 31) /* Lower levels are AArch32         */
+#define HCR_EL2_HCD_DIS		(1 << 29) /* Hypervisor Call disabled         */
+
+/*
+ * CPACR_EL1 bits definitions
+ */
+#define CPACR_EL1_FPEN_EN	(3 << 20) /* SIMD and FP instruction enabled  */
+
+/*
+ * SCTLR_EL1 bits definitions
+ */
+#define SCTLR_EL1_RES1		(3 << 28 | 3 << 22 | 1 << 20 |\
+				 1 << 11) /* Reserved, RES1                   */
+#define SCTLR_EL1_UCI_DIS	(0 << 26) /* Cache instruction disabled       */
+#define SCTLR_EL1_EE_LE		(0 << 25) /* Exception Little-endian          */
+#define SCTLR_EL1_WXN_DIS	(0 << 19) /* Write permission is not XN       */
+#define SCTLR_EL1_NTWE_DIS	(0 << 18) /* WFE instruction disabled         */
+#define SCTLR_EL1_NTWI_DIS	(0 << 16) /* WFI instruction disabled         */
+#define SCTLR_EL1_UCT_DIS	(0 << 15) /* CTR_EL0 access disabled          */
+#define SCTLR_EL1_DZE_DIS	(0 << 14) /* DC ZVA instruction disabled      */
+#define SCTLR_EL1_ICACHE_DIS	(0 << 12) /* Instruction cache disabled       */
+#define SCTLR_EL1_UMA_DIS	(0 << 9)  /* User Mask Access disabled        */
+#define SCTLR_EL1_SED_EN	(0 << 8)  /* SETEND instruction enabled       */
+#define SCTLR_EL1_ITD_EN	(0 << 7)  /* IT instruction enabled           */
+#define SCTLR_EL1_CP15BEN_DIS	(0 << 5)  /* CP15 barrier operation disabled  */
+#define SCTLR_EL1_SA0_DIS	(0 << 4)  /* Stack Alignment EL0 disabled     */
+#define SCTLR_EL1_SA_DIS	(0 << 3)  /* Stack Alignment EL1 disabled     */
+#define SCTLR_EL1_DCACHE_DIS	(0 << 2)  /* Data cache disabled              */
+#define SCTLR_EL1_ALIGN_DIS	(0 << 1)  /* Alignment check disabled         */
+#define SCTLR_EL1_MMU_DIS	(0)       /* MMU disabled                     */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs;
+
+u64 get_page_table_size(void);
+#define PGTABLE_SIZE	get_page_table_size()
+
+/* 2MB granularity */
+#define MMU_SECTION_SHIFT	21
+#define MMU_SECTION_SIZE	(1 << MMU_SECTION_SHIFT)
+
+/* These constants need to be synced to the MT_ types in asm/armv8/mmu.h */
+enum dcache_option {
+	DCACHE_OFF = 0 << 2,
+	DCACHE_WRITETHROUGH = 3 << 2,
+	DCACHE_WRITEBACK = 4 << 2,
+	DCACHE_WRITEALLOC = 4 << 2,
+};
+
+#define wfi()				\
+	({asm volatile(			\
+	"wfi" : : : "memory");		\
+	})
+
+static inline unsigned int current_el(void)
+{
+	unsigned long el;
+
+	asm volatile("mrs %0, CurrentEL" : "=r" (el) : : "cc");
+	return 3 & (el >> 2);
+}
+
+static inline unsigned int get_sctlr(void)
+{
+	unsigned int el;
+	unsigned long val;
+
+	el = current_el();
+	if (el == 1)
+		asm volatile("mrs %0, sctlr_el1" : "=r" (val) : : "cc");
+	else if (el == 2)
+		asm volatile("mrs %0, sctlr_el2" : "=r" (val) : : "cc");
+	else
+		asm volatile("mrs %0, sctlr_el3" : "=r" (val) : : "cc");
+
+	return val;
+}
+
+static inline void set_sctlr(unsigned long val)
+{
+	unsigned int el;
+
+	el = current_el();
+	if (el == 1)
+		asm volatile("msr sctlr_el1, %0" : : "r" (val) : "cc");
+	else if (el == 2)
+		asm volatile("msr sctlr_el2, %0" : : "r" (val) : "cc");
+	else
+		asm volatile("msr sctlr_el3, %0" : : "r" (val) : "cc");
+
+	asm volatile("isb");
+}
+
+static inline unsigned long read_mpidr(void)
+{
+	unsigned long val;
+
+	asm volatile("mrs %0, mpidr_el1" : "=r" (val));
+
+	return val;
+}
+
+#define BSP_COREID	0
+
+void __asm_flush_dcache_all(void);
+void __asm_invalidate_dcache_all(void);
+void __asm_flush_dcache_range(u64 start, u64 end);
+
+/**
+ * __asm_invalidate_dcache_range() - Invalidate a range of virtual addresses
+ *
+ * This performance an invalidate from @start to @end - 1. Both addresses
+ * should be cache-aligned, otherwise this function will align the start
+ * address and may continue past the end address.
+ *
+ * Data in the address range is evicted from the cache and is not written back
+ * to memory.
+ *
+ * @start: Start address to invalidate
+ * @end: End address to invalidate up to (exclusive)
+ */
+void __asm_invalidate_dcache_range(u64 start, u64 end);
+void __asm_invalidate_tlb_all(void);
+void __asm_invalidate_icache_all(void);
+int __asm_invalidate_l3_dcache(void);
+int __asm_flush_l3_dcache(void);
+int __asm_invalidate_l3_icache(void);
+void __asm_switch_ttbr(u64 new_ttbr);
+
+/*
+ * armv8_switch_to_el2() - switch from EL3 to EL2 for ARMv8
+ *
+ * @args:        For loading 64-bit OS, fdt address.
+ *               For loading 32-bit OS, zero.
+ * @mach_nr:     For loading 64-bit OS, zero.
+ *               For loading 32-bit OS, machine nr
+ * @fdt_addr:    For loading 64-bit OS, zero.
+ *               For loading 32-bit OS, fdt address.
+ * @arg4:	 Input argument.
+ * @entry_point: kernel entry point
+ * @es_flag:     execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
+ */
+void __noreturn armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr,
+				    u64 arg4, u64 entry_point, u64 es_flag);
+/*
+ * armv8_switch_to_el1() - switch from EL2 to EL1 for ARMv8
+ *
+ * @args:        For loading 64-bit OS, fdt address.
+ *               For loading 32-bit OS, zero.
+ * @mach_nr:     For loading 64-bit OS, zero.
+ *               For loading 32-bit OS, machine nr
+ * @fdt_addr:    For loading 64-bit OS, zero.
+ *               For loading 32-bit OS, fdt address.
+ * @arg4:	 Input argument.
+ * @entry_point: kernel entry point
+ * @es_flag:     execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
+ */
+void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr,
+			 u64 arg4, u64 entry_point, u64 es_flag);
+void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr,
+			  u64 arg4, u64 entry_point);
+void gic_init(void);
+void gic_send_sgi(unsigned long sgino);
+void wait_for_wakeup(void);
+void protect_secure_region(void);
+void smp_kick_all_cpus(void);
+
+void flush_l3_cache(void);
+void mmu_change_region_attr(phys_addr_t start, size_t size, u64 attrs);
+
+/*
+ * smc_call() - issue a secure monitor call
+ *
+ * Issue a secure monitor call in accordance with ARM "SMC Calling convention",
+ * DEN0028A
+ *
+ * @args: input and output arguments
+ */
+void smc_call(struct pt_regs *args);
+
+void __noreturn psci_system_reset(void);
+void __noreturn psci_system_reset2(u32 reset_level, u32 cookie);
+void __noreturn psci_system_off(void);
+
+#ifdef CONFIG_ARMV8_PSCI
+extern char __secure_start[];
+extern char __secure_end[];
+extern char __secure_stack_start[];
+extern char __secure_stack_end[];
+
+void armv8_setup_psci(void);
+void psci_setup_vectors(void);
+void psci_arch_init(void);
+#endif
+
+#endif	/* __ASSEMBLY__ */
+
+#else /* CONFIG_ARM64 */
+
+#ifdef __KERNEL__
+
+#define CPU_ARCH_UNKNOWN	0
+#define CPU_ARCH_ARMv3		1
+#define CPU_ARCH_ARMv4		2
+#define CPU_ARCH_ARMv4T		3
+#define CPU_ARCH_ARMv5		4
+#define CPU_ARCH_ARMv5T		5
+#define CPU_ARCH_ARMv5TE	6
+#define CPU_ARCH_ARMv5TEJ	7
+#define CPU_ARCH_ARMv6		8
+#define CPU_ARCH_ARMv7		9
+
+/*
+ * CR1 bits (CP#15 CR1)
+ */
+#define CR_M	(1 << 0)	/* MMU enable				*/
+#define CR_A	(1 << 1)	/* Alignment abort enable		*/
+#define CR_C	(1 << 2)	/* Dcache enable			*/
+#define CR_W	(1 << 3)	/* Write buffer enable			*/
+#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
+#define CR_D	(1 << 5)	/* 32-bit data address range		*/
+#define CR_L	(1 << 6)	/* Implementation defined		*/
+#define CR_B	(1 << 7)	/* Big endian				*/
+#define CR_S	(1 << 8)	/* System MMU protection		*/
+#define CR_R	(1 << 9)	/* ROM MMU protection			*/
+#define CR_F	(1 << 10)	/* Implementation defined		*/
+#define CR_Z	(1 << 11)	/* Implementation defined		*/
+#define CR_I	(1 << 12)	/* Icache enable			*/
+#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
+#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
+#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
+#define CR_DT	(1 << 16)
+#define CR_IT	(1 << 18)
+#define CR_ST	(1 << 19)
+#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
+#define CR_U	(1 << 22)	/* Unaligned access operation		*/
+#define CR_XP	(1 << 23)	/* Extended page tables			*/
+#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
+#define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
+#define CR_TRE	(1 << 28)	/* TEX remap enable			*/
+#define CR_AFE	(1 << 29)	/* Access flag enable			*/
+#define CR_TE	(1 << 30)	/* Thumb exception enable		*/
+
+#if defined(CONFIG_ARMV7_LPAE) && !defined(PGTABLE_SIZE)
+#define PGTABLE_SIZE		(4096 * 5)
+#elif !defined(PGTABLE_SIZE)
+#define PGTABLE_SIZE		(4096 * 4)
+#endif
+
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences.  Apparently we can't trust
+ * the compiler from one version to another so a bit of paranoia won't hurt.
+ * This string is meant to be concatenated with the inline asm string and
+ * will cause compilation to stop on mismatch.
+ * (for details, see gcc PR 15089)
+ */
+#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_ARMV7_LPAE
+void switch_to_hypervisor_ret(void);
+#endif
+
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+#ifdef __ARM_ARCH_7A__
+#define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define wfi()
+#endif
+
+static inline unsigned long get_cpsr(void)
+{
+	unsigned long cpsr;
+
+	asm volatile("mrs %0, cpsr" : "=r"(cpsr): );
+	return cpsr;
+}
+
+static inline int is_hyp(void)
+{
+#ifdef CONFIG_ARMV7_LPAE
+	/* HYP mode requires LPAE ... */
+	return ((get_cpsr() & 0x1f) == 0x1a);
+#else
+	/* ... so without LPAE support we can optimize all hyp code away */
+	return 0;
+#endif
+}
+
+static inline unsigned int get_cr(void)
+{
+	unsigned int val;
+
+	if (is_hyp())
+		asm volatile("mrc p15, 4, %0, c1, c0, 0	@ get CR" : "=r" (val)
+								  :
+								  : "cc");
+	else
+		asm volatile("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val)
+								  :
+								  : "cc");
+	return val;
+}
+
+static inline void set_cr(unsigned int val)
+{
+	if (is_hyp())
+		asm volatile("mcr p15, 4, %0, c1, c0, 0	@ set CR" :
+								  : "r" (val)
+								  : "cc");
+	else
+		asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR" :
+								  : "r" (val)
+								  : "cc");
+	isb();
+}
+
+#ifdef CONFIG_ARMV7_LPAE
+/* Long-Descriptor Translation Table Level 1/2 Bits */
+#define TTB_SECT_XN_MASK	(1ULL << 54)
+#define TTB_SECT_NG_MASK	(1 << 11)
+#define TTB_SECT_AF		(1 << 10)
+#define TTB_SECT_SH_MASK	(3 << 8)
+#define TTB_SECT_NS_MASK	(1 << 5)
+#define TTB_SECT_AP		(1 << 6)
+/* Note: TTB AP bits are set elsewhere */
+#define TTB_SECT_MAIR(x)	((x & 0x7) << 2) /* Index into MAIR */
+#define TTB_SECT		(1 << 0)
+#define TTB_PAGETABLE		(3 << 0)
+
+/* TTBCR flags */
+#define TTBCR_EAE		(1 << 31)
+#define TTBCR_T0SZ(x)		((x) << 0)
+#define TTBCR_T1SZ(x)		((x) << 16)
+#define TTBCR_USING_TTBR0	(TTBCR_T0SZ(0) | TTBCR_T1SZ(0))
+#define TTBCR_IRGN0_NC		(0 << 8)
+#define TTBCR_IRGN0_WBWA	(1 << 8)
+#define TTBCR_IRGN0_WT		(2 << 8)
+#define TTBCR_IRGN0_WBNWA	(3 << 8)
+#define TTBCR_IRGN0_MASK	(3 << 8)
+#define TTBCR_ORGN0_NC		(0 << 10)
+#define TTBCR_ORGN0_WBWA	(1 << 10)
+#define TTBCR_ORGN0_WT		(2 << 10)
+#define TTBCR_ORGN0_WBNWA	(3 << 10)
+#define TTBCR_ORGN0_MASK	(3 << 10)
+#define TTBCR_SHARED_NON	(0 << 12)
+#define TTBCR_SHARED_OUTER	(2 << 12)
+#define TTBCR_SHARED_INNER	(3 << 12)
+#define TTBCR_EPD0		(0 << 7)
+
+/*
+ * VMSAv8-32 Long-descriptor format memory region attributes
+ * (ARM Architecture Reference Manual section G5.7.4 [DDI0487E.a])
+ *
+ * MAIR0[ 7: 0] 0x00 Device-nGnRnE (aka Strongly-Ordered)
+ * MAIR0[15: 8] 0xaa Outer/Inner Write-Through, Read-Allocate No Write-Allocate
+ * MAIR0[23:16] 0xee Outer/Inner Write-Back, Read-Allocate No Write-Allocate
+ * MAIR0[31:24] 0xff Outer/Inner Write-Back, Read-Allocate Write-Allocate
+ */
+#define MEMORY_ATTRIBUTES	((0x00 << (0 * 8)) | (0xaa << (1 * 8)) | \
+				 (0xee << (2 * 8)) | (0xff << (3 * 8)))
+
+/* options available for data cache on each page */
+enum dcache_option {
+	DCACHE_OFF = TTB_SECT | TTB_SECT_MAIR(0) | TTB_SECT_XN_MASK,
+	DCACHE_WRITETHROUGH = TTB_SECT | TTB_SECT_MAIR(1),
+	DCACHE_WRITEBACK = TTB_SECT | TTB_SECT_MAIR(2),
+	DCACHE_WRITEALLOC = TTB_SECT | TTB_SECT_MAIR(3),
+};
+#elif defined(CONFIG_CPU_V7A)
+/* Short-Descriptor Translation Table Level 1 Bits */
+#define TTB_SECT_NS_MASK	(1 << 19)
+#define TTB_SECT_NG_MASK	(1 << 17)
+#define TTB_SECT_S_MASK		(1 << 16)
+/* Note: TTB AP bits are set elsewhere */
+#define TTB_SECT_AP		(3 << 10)
+#define TTB_SECT_TEX(x)		((x & 0x7) << 12)
+#define TTB_SECT_DOMAIN(x)	((x & 0xf) << 5)
+#define TTB_SECT_XN_MASK	(1 << 4)
+#define TTB_SECT_C_MASK		(1 << 3)
+#define TTB_SECT_B_MASK		(1 << 2)
+#define TTB_SECT		(2 << 0)
+
+/*
+ * Short-descriptor format memory region attributes, without TEX remap
+ * (ARM Architecture Reference Manual section G5.7.2 [DDI0487E.a])
+ *
+ * TEX[0] C  B
+ *   0    0  0   Device-nGnRnE (aka Strongly-Ordered)
+ *   0    1  0   Outer/Inner Write-Through, Read-Allocate No Write-Allocate
+ *   0    1  1   Outer/Inner Write-Back, Read-Allocate No Write-Allocate
+ *   1    1  1   Outer/Inner Write-Back, Read-Allocate Write-Allocate
+ */
+enum dcache_option {
+	DCACHE_OFF = TTB_SECT_DOMAIN(0) | TTB_SECT_XN_MASK | TTB_SECT,
+	DCACHE_WRITETHROUGH = TTB_SECT_DOMAIN(0) | TTB_SECT | TTB_SECT_C_MASK,
+	DCACHE_WRITEBACK = DCACHE_WRITETHROUGH | TTB_SECT_B_MASK,
+	DCACHE_WRITEALLOC = DCACHE_WRITEBACK | TTB_SECT_TEX(1),
+};
+#else
+#define TTB_SECT_AP		(3 << 10)
+/* options available for data cache on each page */
+enum dcache_option {
+	DCACHE_OFF = 0x12,
+	DCACHE_WRITETHROUGH = 0x1a,
+	DCACHE_WRITEBACK = 0x1e,
+	DCACHE_WRITEALLOC = 0x16,
+};
+#endif
+
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+#define DCACHE_DEFAULT_OPTION	DCACHE_WRITETHROUGH
+#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
+#define DCACHE_DEFAULT_OPTION	DCACHE_WRITEALLOC
+#elif defined(CONFIG_SYS_ARM_CACHE_WRITEBACK)
+#define DCACHE_DEFAULT_OPTION	DCACHE_WRITEBACK
+#endif
+
+/* Size of an MMU section */
+enum {
+#ifdef CONFIG_ARMV7_LPAE
+	MMU_SECTION_SHIFT	= 21, /* 2MB */
+#else
+	MMU_SECTION_SHIFT	= 20, /* 1MB */
+#endif
+	MMU_SECTION_SIZE	= 1 << MMU_SECTION_SHIFT,
+};
+
+#ifdef CONFIG_CPU_V7A
+/* TTBR0 bits */
+#define TTBR0_BASE_ADDR_MASK	0xFFFFC000
+#define TTBR0_RGN_NC			(0 << 3)
+#define TTBR0_RGN_WBWA			(1 << 3)
+#define TTBR0_RGN_WT			(2 << 3)
+#define TTBR0_RGN_WB			(3 << 3)
+/* TTBR0[6] is IRGN[0] and TTBR[0] is IRGN[1] */
+#define TTBR0_IRGN_NC			(0 << 0 | 0 << 6)
+#define TTBR0_IRGN_WBWA			(0 << 0 | 1 << 6)
+#define TTBR0_IRGN_WT			(1 << 0 | 0 << 6)
+#define TTBR0_IRGN_WB			(1 << 0 | 1 << 6)
+#endif
+
+/**
+ * mmu_page_table_flush() - register an update to page tables
+ *
+ * Register an update to the page tables, and flush the TLB
+ *
+ * @start:	start address of update in page table
+ * @stop:	stop address of update in page table
+ */
+void mmu_page_table_flush(unsigned long start, unsigned long stop);
+
+#ifdef CONFIG_ARMV7_PSCI
+void psci_arch_cpu_entry(void);
+void psci_arch_init(void);
+u32 psci_version(void);
+s32 psci_features(u32 function_id, u32 psci_fid);
+s32 psci_cpu_off(void);
+s32 psci_cpu_on(u32 function_id, u32 target_cpu, u32 pc,
+		u32 context_id);
+s32 psci_affinity_info(u32 function_id, u32 target_affinity,
+		       u32  lowest_affinity_level);
+u32 psci_migrate_info_type(void);
+void psci_system_off(void);
+void psci_system_reset(void);
+s32 psci_features(u32 function_id, u32 psci_fid);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* CONFIG_ARM64 */
+
+#ifndef __ASSEMBLY__
+/**
+ * save_boot_params() - Save boot parameters before starting reset sequence
+ *
+ * If you provide this function it will be called immediately U-Boot starts,
+ * both for SPL and U-Boot proper.
+ *
+ * All registers are unchanged from U-Boot entry. No registers need be
+ * preserved.
+ *
+ * This is not a normal C function. There is no stack. Return by branching to
+ * save_boot_params_ret.
+ *
+ * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3);
+ */
+
+/**
+ * save_boot_params_ret() - Return from save_boot_params()
+ *
+ * If you provide save_boot_params(), then you should jump back to this
+ * function when done. Try to preserve all registers.
+ *
+ * If your implementation of save_boot_params() is in C then it is acceptable
+ * to simply call save_boot_params_ret() at the end of your function. Since
+ * there is no link register set up, you cannot just exit the function. U-Boot
+ * will return to the (initialised) value of lr, and likely crash/hang.
+ *
+ * If your implementation of save_boot_params() is in assembler then you
+ * should use 'b' or 'bx' to return to save_boot_params_ret.
+ */
+void save_boot_params_ret(void);
+
+/**
+ * mmu_set_region_dcache_behaviour_phys() - set virt/phys mapping
+ *
+ * Change the virt/phys mapping and cache settings for a region.
+ *
+ * @virt:	virtual start address of memory region to change
+ * @phys:	physical address for the memory region to set
+ * @size:	size of memory region to change
+ * @option:	dcache option to select
+ */
+void mmu_set_region_dcache_behaviour_phys(phys_addr_t virt, phys_addr_t phys,
+					size_t size, enum dcache_option option);
+
+/**
+ * mmu_set_region_dcache_behaviour() - set cache settings
+ *
+ * Change the cache settings for a region.
+ *
+ * @start:	start address of memory region to change
+ * @size:	size of memory region to change
+ * @option:	dcache option to select
+ */
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
+				     enum dcache_option option);
+
+#ifdef CONFIG_SYS_NONCACHED_MEMORY
+/**
+ * noncached_init() - Initialize non-cached memory region
+ *
+ * Initialize non-cached memory area. This memory region will be typically
+ * located right below the malloc() area and mapped uncached in the MMU.
+ *
+ * It is called during the generic post-relocation init sequence.
+ *
+ * Return: 0 if OK
+ */
+int noncached_init(void);
+
+phys_addr_t noncached_alloc(size_t size, size_t align);
+#endif /* CONFIG_SYS_NONCACHED_MEMORY */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/ti-common/davinci_nand.h b/roms/u-boot/arch/arm/include/asm/ti-common/davinci_nand.h
new file mode 100644
index 000000000..28842c3b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ti-common/davinci_nand.h
@@ -0,0 +1,98 @@
+/*
+ * NAND Flash Driver
+ *
+ * Copyright (C) 2006-2014 Texas Instruments.
+ *
+ * Based on Linux DaVinci NAND driver by TI.
+ */
+
+#ifndef _DAVINCI_NAND_H_
+#define _DAVINCI_NAND_H_
+
+#include <linux/mtd/rawnand.h>
+#include <asm/arch/hardware.h>
+
+#define NAND_READ_START  	0x00
+#define NAND_READ_END    	0x30
+#define NAND_STATUS      	0x70
+
+#define MASK_CLE		0x10
+#define MASK_ALE		0x08
+
+#ifdef CONFIG_SYS_NAND_MASK_CLE
+#undef MASK_CLE
+#define MASK_CLE CONFIG_SYS_NAND_MASK_CLE
+#endif
+#ifdef CONFIG_SYS_NAND_MASK_ALE
+#undef MASK_ALE
+#define MASK_ALE CONFIG_SYS_NAND_MASK_ALE
+#endif
+
+struct davinci_emif_regs {
+	uint32_t	ercsr;
+	uint32_t	awccr;
+	uint32_t	sdbcr;
+	uint32_t	sdrcr;
+	union {
+		uint32_t abncr[4];
+		struct {
+			uint32_t ab1cr;
+			uint32_t ab2cr;
+			uint32_t ab3cr;
+			uint32_t ab4cr;
+		};
+	};
+	uint32_t	sdtimr;
+	uint32_t	ddrsr;
+	uint32_t	ddrphycr;
+	uint32_t	ddrphysr;
+	uint32_t	totar;
+	uint32_t	totactr;
+	uint32_t	ddrphyid_rev;
+	uint32_t	sdsretr;
+	uint32_t	eirr;
+	uint32_t	eimr;
+	uint32_t	eimsr;
+	uint32_t	eimcr;
+	uint32_t	ioctrlr;
+	uint32_t	iostatr;
+	uint32_t	rsvd0;
+	uint32_t	one_nand_cr;
+	uint32_t	nandfcr;
+	uint32_t	nandfsr;
+	uint32_t	rsvd1[2];
+	uint32_t	nandfecc[4];
+	uint32_t	rsvd2[15];
+	uint32_t	nand4biteccload;
+	uint32_t	nand4bitecc[4];
+	uint32_t	nanderradd1;
+	uint32_t	nanderradd2;
+	uint32_t	nanderrval1;
+	uint32_t	nanderrval2;
+};
+
+#define davinci_emif_regs \
+	((struct davinci_emif_regs *)DAVINCI_ASYNC_EMIF_CNTRL_BASE)
+
+#define DAVINCI_NANDFCR_NAND_ENABLE(n)			(1 << ((n) - 2))
+#define DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK		(3 << 4)
+#define DAVINCI_NANDFCR_4BIT_ECC_SEL(n)			(((n) - 2) << 4)
+#define DAVINCI_NANDFCR_1BIT_ECC_START(n)		(1 << (8 + ((n) - 2)))
+#define DAVINCI_NANDFCR_4BIT_ECC_START			(1 << 12)
+#define DAVINCI_NANDFCR_4BIT_CALC_START			(1 << 13)
+#define DAVINCI_NANDFCR_CS2NAND				(1 << 0)
+
+/* Chip Select setup */
+#define DAVINCI_ABCR_STROBE_SELECT			(1 << 31)
+#define DAVINCI_ABCR_EXT_WAIT				(1 << 30)
+#define DAVINCI_ABCR_WSETUP(n)				(n << 26)
+#define DAVINCI_ABCR_WSTROBE(n)				(n << 20)
+#define DAVINCI_ABCR_WHOLD(n)				(n << 17)
+#define DAVINCI_ABCR_RSETUP(n)				(n << 13)
+#define DAVINCI_ABCR_RSTROBE(n)				(n << 7)
+#define DAVINCI_ABCR_RHOLD(n)				(n << 4)
+#define DAVINCI_ABCR_TA(n)				(n << 2)
+#define DAVINCI_ABCR_ASIZE_16BIT			1
+#define DAVINCI_ABCR_ASIZE_8BIT				0
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/ti-common/keystone_nav.h b/roms/u-boot/arch/arm/include/asm/ti-common/keystone_nav.h
new file mode 100644
index 000000000..e57751442
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ti-common/keystone_nav.h
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Multicore Navigator definitions
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef _KEYSTONE_NAV_H_
+#define _KEYSTONE_NAV_H_
+
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+#define QM_OK                    0
+#define QM_ERR                  -1
+#define QM_DESC_TYPE_HOST        0
+#define QM_DESC_PSINFO_IN_DESCR  0
+#define QM_DESC_DEFAULT_DESCINFO    (QM_DESC_TYPE_HOST << 30) | \
+					(QM_DESC_PSINFO_IN_DESCR << 22)
+
+/* Packet Info */
+#define QM_DESC_PINFO_EPIB              1
+#define QM_DESC_PINFO_RETURN_OWN        1
+#define QM_DESC_DEFAULT_PINFO           (QM_DESC_PINFO_EPIB << 31) | \
+					(QM_DESC_PINFO_RETURN_OWN << 15)
+
+struct qm_cfg_reg {
+	u32	revision;
+	u32	__pad1;
+	u32	divert;
+	u32	link_ram_base0;
+	u32	link_ram_size0;
+	u32	link_ram_base1;
+	u32	link_ram_size1;
+	u32	link_ram_base2;
+	u32	starvation[0];
+};
+
+struct	descr_mem_setup_reg {
+	u32	base_addr;
+	u32	start_idx;
+	u32	desc_reg_size;
+	u32	_res0;
+};
+
+struct qm_reg_queue {
+	u32	entry_count;
+	u32	byte_count;
+	u32	packet_size;
+	u32	ptr_size_thresh;
+};
+
+struct qm_config {
+	/* QM module addresses */
+	u32	stat_cfg;	/* status and config		*/
+	struct qm_reg_queue *queue;	/* management region	*/
+	u32	mngr_vbusm;	/* management region (VBUSM)	*/
+	u32	i_lram;		/* internal linking RAM		*/
+	struct qm_reg_queue *proxy;
+	u32	status_ram;
+	struct qm_cfg_reg *mngr_cfg;
+				/* Queue manager config region	*/
+	u32	intd_cfg;	/* QMSS INTD config region	*/
+	struct	descr_mem_setup_reg *desc_mem;
+				/* descritor memory setup region*/
+	u32	region_num;
+	u32	pdsp_cmd;	/* PDSP1 command interface	*/
+	u32	pdsp_ctl;	/* PDSP1 control registers	*/
+	u32	pdsp_iram;
+	/* QM configuration parameters */
+
+	u32	qpool_num;	/* */
+};
+
+struct qm_host_desc {
+	u32 desc_info;
+	u32 tag_info;
+	u32 packet_info;
+	u32 buff_len;
+	u32 buff_ptr;
+	u32 next_bdptr;
+	u32 orig_buff_len;
+	u32 orig_buff_ptr;
+	u32 timestamp;
+	u32 swinfo[3];
+	u32 ps_data[20];
+};
+
+#define HDESC_NUM        256
+
+int	qm_init(void);
+void	qm_close(void);
+void	qm_push(struct qm_host_desc *hd, u32 qnum);
+struct qm_host_desc *qm_pop(u32 qnum);
+
+void	qm_buff_push(struct qm_host_desc *hd, u32 qnum,
+		     void *buff_ptr, u32 buff_len);
+
+struct	qm_host_desc *qm_pop_from_free_pool(void);
+void	queue_close(u32 qnum);
+
+/*
+ * DMA API
+ */
+#define CPDMA_REG_VAL_MAKE_RX_FLOW_A(einfo, psinfo, rxerr, desc, \
+				     psloc, sopoff, qmgr, qnum) \
+	(((einfo & 1) << 30)  | \
+	 ((psinfo & 1) << 29) | \
+	 ((rxerr & 1) << 28)  | \
+	 ((desc & 3) << 26)   | \
+	 ((psloc & 1) << 25)  | \
+	 ((sopoff & 0x1ff) << 16) | \
+	 ((qmgr & 3) << 12)   | \
+	 ((qnum & 0xfff) << 0))
+
+#define CPDMA_REG_VAL_MAKE_RX_FLOW_D(fd0qm, fd0qnum, fd1qm, fd1qnum) \
+	(((fd0qm & 3) << 28)  | \
+	 ((fd0qnum & 0xfff) << 16) | \
+	 ((fd1qm & 3) << 12)  | \
+	 ((fd1qnum & 0xfff) <<  0))
+
+#define CPDMA_CHAN_A_ENABLE ((u32)1 << 31)
+#define CPDMA_CHAN_A_TDOWN  (1 << 30)
+#define TDOWN_TIMEOUT_COUNT  100
+
+struct global_ctl_regs {
+	u32	revision;
+	u32	perf_control;
+	u32	emulation_control;
+	u32	priority_control;
+	u32	qm_base_addr[4];
+};
+
+struct tx_chan_regs {
+	u32	cfg_a;
+	u32	cfg_b;
+	u32	res[6];
+};
+
+struct rx_chan_regs {
+	u32	cfg_a;
+	u32	res[7];
+};
+
+struct rx_flow_regs {
+	u32	control;
+	u32	tags;
+	u32	tag_sel;
+	u32	fdq_sel[2];
+	u32	thresh[3];
+};
+
+struct pktdma_cfg {
+	struct global_ctl_regs	*global;
+	struct tx_chan_regs	*tx_ch;
+	u32			tx_ch_num;
+	struct rx_chan_regs	*rx_ch;
+	u32			rx_ch_num;
+	u32			*tx_sched;
+	struct rx_flow_regs	*rx_flows;
+	u32			rx_flow_num;
+
+	u32			rx_free_q;
+	u32			rx_rcv_q;
+	u32			tx_snd_q;
+
+	u32			rx_flow; /* flow that is used for RX */
+};
+
+extern struct pktdma_cfg netcp_pktdma;
+
+/*
+ * packet dma user allocates memory for rx buffers
+ * and describe it in the following structure
+ */
+struct rx_buff_desc {
+	u8	*buff_ptr;
+	u32	num_buffs;
+	u32	buff_len;
+	u32	rx_flow;
+};
+
+int ksnav_close(struct pktdma_cfg *pktdma);
+int ksnav_init(struct pktdma_cfg *pktdma, struct rx_buff_desc *rx_buffers);
+int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes, u32 swinfo2);
+void *ksnav_recv(struct pktdma_cfg *pktdma, u32 **pkt, int *num_bytes);
+void ksnav_release_rxhd(struct pktdma_cfg *pktdma, void *hd);
+
+#endif  /* _KEYSTONE_NAV_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/ti-common/keystone_net.h b/roms/u-boot/arch/arm/include/asm/ti-common/keystone_net.h
new file mode 100644
index 000000000..0852ce80a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ti-common/keystone_net.h
@@ -0,0 +1,235 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * emac definitions for keystone2 devices
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef _KEYSTONE_NET_H_
+#define _KEYSTONE_NET_H_
+
+#include <asm/io.h>
+#include <phy.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/* EMAC */
+#ifdef CONFIG_KSNET_NETCP_V1_0
+
+#define GBETH_BASE			(CONFIG_KSNET_NETCP_BASE + 0x00090000)
+#define EMAC_EMACSL_BASE_ADDR		(GBETH_BASE + 0x900)
+#define EMAC_MDIO_BASE_ADDR		(GBETH_BASE + 0x300)
+#define EMAC_SGMII_BASE_ADDR		(GBETH_BASE + 0x100)
+#define DEVICE_EMACSL_BASE(x)		(EMAC_EMACSL_BASE_ADDR + (x) * 0x040)
+
+/* Register offsets */
+#define CPGMACSL_REG_CTL		0x04
+#define CPGMACSL_REG_STATUS		0x08
+#define CPGMACSL_REG_RESET		0x0c
+#define CPGMACSL_REG_MAXLEN		0x10
+
+#elif defined CONFIG_KSNET_NETCP_V1_5
+
+#define GBETH_BASE			(CONFIG_KSNET_NETCP_BASE + 0x00200000)
+#define CPGMACSL_REG_RX_PRI_MAP		0x020
+#define EMAC_EMACSL_BASE_ADDR		(GBETH_BASE + 0x22000)
+#define EMAC_MDIO_BASE_ADDR		(GBETH_BASE + 0x00f00)
+#define EMAC_SGMII_BASE_ADDR		(GBETH_BASE + 0x00100)
+#define DEVICE_EMACSL_BASE(x)		(EMAC_EMACSL_BASE_ADDR + (x) * 0x1000)
+
+/* Register offsets */
+#define CPGMACSL_REG_CTL		0x330
+#define CPGMACSL_REG_STATUS		0x334
+#define CPGMACSL_REG_RESET		0x338
+#define CPGMACSL_REG_MAXLEN		0x024
+
+#endif
+
+#define KEYSTONE2_EMAC_GIG_ENABLE
+
+#define MAC_ID_BASE_ADDR		CONFIG_KSNET_MAC_ID_BASE
+
+/* MDIO module input frequency */
+#ifdef CONFIG_SOC_K2G
+#define EMAC_MDIO_BUS_FREQ		(ks_clk_get_rate(sys_clk0_3_clk))
+#else
+#define EMAC_MDIO_BUS_FREQ		(ks_clk_get_rate(pass_pll_clk))
+#endif
+/* MDIO clock output frequency */
+#define EMAC_MDIO_CLOCK_FREQ		2500000	/* 2.5 MHz */
+
+#define EMAC_MACCONTROL_MIIEN_ENABLE		0x20
+#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE	0x1
+#define EMAC_MACCONTROL_GIGABIT_ENABLE		BIT(7)
+#define EMAC_MACCONTROL_GIGFORCE		BIT(17)
+#define EMAC_MACCONTROL_RMIISPEED_100		BIT(15)
+
+#define EMAC_MIN_ETHERNET_PKT_SIZE		60
+
+struct mac_sl_cfg {
+	u_int32_t max_rx_len;	/* Maximum receive packet length. */
+	u_int32_t ctl;		/* Control bitfield */
+};
+
+/**
+ * Definition: Control bitfields used in the ctl field of mac_sl_cfg
+ */
+#define GMACSL_RX_ENABLE_RCV_CONTROL_FRAMES	BIT(24)
+#define GMACSL_RX_ENABLE_RCV_SHORT_FRAMES	BIT(23)
+#define GMACSL_RX_ENABLE_RCV_ERROR_FRAMES	BIT(22)
+#define GMACSL_RX_ENABLE_EXT_CTL		BIT(18)
+#define GMACSL_RX_ENABLE_GIG_FORCE		BIT(17)
+#define GMACSL_RX_ENABLE_IFCTL_B		BIT(16)
+#define GMACSL_RX_ENABLE_IFCTL_A		BIT(15)
+#define GMACSL_RX_ENABLE_CMD_IDLE		BIT(11)
+#define GMACSL_TX_ENABLE_SHORT_GAP		BIT(10)
+#define GMACSL_ENABLE_GIG_MODE			BIT(7)
+#define GMACSL_TX_ENABLE_PACE			BIT(6)
+#define GMACSL_ENABLE				BIT(5)
+#define GMACSL_TX_ENABLE_FLOW_CTL		BIT(4)
+#define GMACSL_RX_ENABLE_FLOW_CTL		BIT(3)
+#define GMACSL_ENABLE_LOOPBACK			BIT(1)
+#define GMACSL_ENABLE_FULL_DUPLEX		BIT(0)
+
+/* EMAC SL function return values */
+#define GMACSL_RET_OK				0
+#define GMACSL_RET_INVALID_PORT			-1
+#define GMACSL_RET_WARN_RESET_INCOMPLETE	-2
+#define GMACSL_RET_WARN_MAXLEN_TOO_BIG		-3
+#define GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE	-4
+
+/* EMAC SL register definitions */
+#define DEVICE_EMACSL_RESET_POLL_COUNT		100
+
+/* Soft reset register values */
+#define CPGMAC_REG_RESET_VAL_RESET_MASK		BIT(0)
+#define CPGMAC_REG_RESET_VAL_RESET		BIT(0)
+#define CPGMAC_REG_MAXLEN_LEN			0x3fff
+
+/* CPSW */
+/* Control bitfields */
+#define CPSW_CTL_P2_PASS_PRI_TAGGED		BIT(5)
+#define CPSW_CTL_P1_PASS_PRI_TAGGED		BIT(4)
+#define CPSW_CTL_P0_PASS_PRI_TAGGED		BIT(3)
+#define CPSW_CTL_P0_ENABLE			BIT(2)
+#define CPSW_CTL_VLAN_AWARE			BIT(1)
+#define CPSW_CTL_FIFO_LOOPBACK			BIT(0)
+
+#define DEVICE_CPSW_NUM_PORTS			CONFIG_KSNET_CPSW_NUM_PORTS
+#define DEVICE_N_GMACSL_PORTS			(DEVICE_CPSW_NUM_PORTS - 1)
+
+#ifdef CONFIG_KSNET_NETCP_V1_0
+
+#define DEVICE_CPSW_BASE			(GBETH_BASE + 0x800)
+#define CPSW_REG_CTL				0x004
+#define CPSW_REG_STAT_PORT_EN			0x00c
+#define CPSW_REG_MAXLEN				0x040
+#define CPSW_REG_ALE_CONTROL			0x608
+#define CPSW_REG_ALE_PORTCTL(x)			(0x640 + (x) * 4)
+#define CPSW_REG_VAL_STAT_ENABLE_ALL		0xf
+
+#elif defined CONFIG_KSNET_NETCP_V1_5
+
+#define DEVICE_CPSW_BASE			(GBETH_BASE + 0x20000)
+#define CPSW_REG_CTL				0x00004
+#define CPSW_REG_STAT_PORT_EN			0x00014
+#define CPSW_REG_MAXLEN				0x01024
+#define CPSW_REG_ALE_CONTROL			0x1e008
+#define CPSW_REG_ALE_PORTCTL(x)			(0x1e040 + (x) * 4)
+#define CPSW_REG_VAL_STAT_ENABLE_ALL		0x1ff
+
+#endif
+
+#define CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE	((u_int32_t)0xc0000000)
+#define CPSW_REG_VAL_ALE_CTL_BYPASS		((u_int32_t)0x00000010)
+#define CPSW_REG_VAL_PORTCTL_FORWARD_MODE	0x3
+
+#define target_get_switch_ctl()			CPSW_CTL_P0_ENABLE
+#define SWITCH_MAX_PKT_SIZE			9000
+
+/* SGMII */
+#define SGMII_REG_STATUS_LOCK			BIT(4)
+#define SGMII_REG_STATUS_LINK			BIT(0)
+#define SGMII_REG_STATUS_AUTONEG		BIT(2)
+#define SGMII_REG_CONTROL_AUTONEG		BIT(0)
+#define SGMII_REG_CONTROL_MASTER		BIT(5)
+#define SGMII_REG_MR_ADV_ENABLE			BIT(0)
+#define SGMII_REG_MR_ADV_LINK			BIT(15)
+#define SGMII_REG_MR_ADV_FULL_DUPLEX		BIT(12)
+#define SGMII_REG_MR_ADV_GIG_MODE		BIT(11)
+
+#define SGMII_LINK_MAC_MAC_AUTONEG		0
+#define SGMII_LINK_MAC_PHY			1
+#define SGMII_LINK_MAC_MAC_FORCED		2
+#define SGMII_LINK_MAC_FIBER			3
+#define SGMII_LINK_MAC_PHY_FORCED		4
+
+#ifdef CONFIG_KSNET_NETCP_V1_0
+#define SGMII_OFFSET(x)		((x <= 1) ? (x * 0x100) : ((x * 0x100) + 0x100))
+#elif defined CONFIG_KSNET_NETCP_V1_5
+#define SGMII_OFFSET(x)		((x) * 0x100)
+#endif
+
+#define SGMII_IDVER_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x000)
+#define SGMII_SRESET_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x004)
+#define SGMII_CTL_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x010)
+#define SGMII_STATUS_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x014)
+#define SGMII_MRADV_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x018)
+#define SGMII_LPADV_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x020)
+#define SGMII_TXCFG_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x030)
+#define SGMII_RXCFG_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x034)
+#define SGMII_AUXCFG_REG(x)	(EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x038)
+
+/* RGMII */
+#define RGMII_REG_STATUS_LINK		BIT(0)
+
+#define RGMII_STATUS_REG		(GBETH_BASE + 0x18)
+
+/* PSS */
+#ifdef CONFIG_KSNET_NETCP_V1_0
+
+#define DEVICE_PSTREAM_CFG_REG_ADDR	(CONFIG_KSNET_NETCP_BASE + 0x604)
+#define DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI	0x06060606
+#define hw_config_streaming_switch()\
+	writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI, DEVICE_PSTREAM_CFG_REG_ADDR);
+
+#elif defined CONFIG_KSNET_NETCP_V1_5
+
+#define DEVICE_PSTREAM_CFG_REG_ADDR	(CONFIG_KSNET_NETCP_BASE + 0x500)
+#define DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI	0x0
+
+#define hw_config_streaming_switch()\
+	writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
+	       DEVICE_PSTREAM_CFG_REG_ADDR);\
+	writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
+	       DEVICE_PSTREAM_CFG_REG_ADDR+4);\
+	writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
+	       DEVICE_PSTREAM_CFG_REG_ADDR+8);\
+	writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
+	       DEVICE_PSTREAM_CFG_REG_ADDR+12);
+
+#endif
+
+/* EMAC MDIO Registers Structure */
+struct mdio_regs {
+	u32 version;
+	u32 control;
+	u32 alive;
+	u32 link;
+	u32 linkintraw;
+	u32 linkintmasked;
+	u32 rsvd0[2];
+	u32 userintraw;
+	u32 userintmasked;
+	u32 userintmaskset;
+	u32 userintmaskclear;
+	u32 rsvd1[20];
+	u32 useraccess0;
+	u32 userphysel0;
+	u32 useraccess1;
+	u32 userphysel1;
+};
+
+#endif  /* _KEYSTONE_NET_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/ti-common/keystone_serdes.h b/roms/u-boot/arch/arm/include/asm/ti-common/keystone_serdes.h
new file mode 100644
index 000000000..623438856
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ti-common/keystone_serdes.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Texas Instruments Keystone SerDes driver
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __TI_KEYSTONE_SERDES_H__
+#define __TI_KEYSTONE_SERDES_H__
+
+/* SERDES Reference clock */
+enum ks2_serdes_clock {
+	SERDES_CLOCK_100M,		/* 100 MHz */
+	SERDES_CLOCK_122P88M,		/* 122.88 MHz */
+	SERDES_CLOCK_125M,		/* 125 MHz */
+	SERDES_CLOCK_156P25M,		/* 156.25 MHz */
+	SERDES_CLOCK_312P5M,		/* 312.5 MHz */
+};
+
+/* SERDES Lane Baud Rate */
+enum ks2_serdes_rate {
+	SERDES_RATE_4P9152G,		/* 4.9152 GBaud */
+	SERDES_RATE_5G,			/* 5 GBaud */
+	SERDES_RATE_6P144G,		/* 6.144 GBaud */
+	SERDES_RATE_6P25G,		/* 6.25 GBaud */
+	SERDES_RATE_10p3125g,		/* 10.3215 GBaud */
+	SERDES_RATE_12p5g,		/* 12.5 GBaud */
+};
+
+/* SERDES Lane Rate Mode */
+enum ks2_serdes_rate_mode {
+	SERDES_FULL_RATE,
+	SERDES_HALF_RATE,
+	SERDES_QUARTER_RATE,
+};
+
+/* SERDES PHY TYPE */
+enum ks2_serdes_interface {
+	SERDES_PHY_SGMII,
+	SERDES_PHY_PCSR,		/* XGE SERDES */
+};
+
+struct ks2_serdes {
+	enum ks2_serdes_clock clk;
+	enum ks2_serdes_rate rate;
+	enum ks2_serdes_rate_mode rate_mode;
+	enum ks2_serdes_interface intf;
+	u32 loopback;
+};
+
+int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes);
+
+#endif /* __TI_KEYSTONE_SERDES_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/ti-common/omap_wdt.h b/roms/u-boot/arch/arm/include/asm/ti-common/omap_wdt.h
new file mode 100644
index 000000000..42d7e4c98
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ti-common/omap_wdt.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * omap_wdt.h
+ *
+ * OMAP Watchdog header file
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef __OMAP_WDT_H__
+#define __OMAP_WDT_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/*
+ * Watchdog:
+ * Using the prescaler, the OMAP watchdog could go for many
+ * months before firing.  These limits work without scaling,
+ * with the 60 second default assumed by most tools and docs.
+ */
+#define TIMER_MARGIN_MAX	(24 * 60 * 60)	/* 1 day */
+#define TIMER_MARGIN_DEFAULT	60	/* 60 secs */
+#define TIMER_MARGIN_MIN	1
+
+#define PTV			0	/* prescale */
+#define GET_WLDR_VAL(secs)	(0xffffffff - ((secs) * (32768/(1<<PTV))) + 1)
+#define WDT_WWPS_PEND_WCLR	BIT(0)
+#define WDT_WWPS_PEND_WLDR	BIT(2)
+#define WDT_WWPS_PEND_WTGR	BIT(3)
+#define WDT_WWPS_PEND_WSPR	BIT(4)
+
+#define WDT_WCLR_PRE		BIT(5)
+#define WDT_WCLR_PTV_OFF	2
+
+/* Watchdog timer registers */
+struct wd_timer {
+	unsigned int resv1[4];
+	unsigned int wdtwdsc;	/* offset 0x010 */
+	unsigned int wdtwdst;	/* offset 0x014 */
+	unsigned int wdtwisr;	/* offset 0x018 */
+	unsigned int wdtwier;	/* offset 0x01C */
+	unsigned int wdtwwer;	/* offset 0x020 */
+	unsigned int wdtwclr;	/* offset 0x024 */
+	unsigned int wdtwcrr;	/* offset 0x028 */
+	unsigned int wdtwldr;	/* offset 0x02C */
+	unsigned int wdtwtgr;	/* offset 0x030 */
+	unsigned int wdtwwps;	/* offset 0x034 */
+	unsigned int resv2[3];
+	unsigned int wdtwdly;	/* offset 0x044 */
+	unsigned int wdtwspr;	/* offset 0x048 */
+	unsigned int resv3[1];
+	unsigned int wdtwqeoi;	/* offset 0x050 */
+	unsigned int wdtwqstar;	/* offset 0x054 */
+	unsigned int wdtwqsta;	/* offset 0x058 */
+	unsigned int wdtwqens;	/* offset 0x05C */
+	unsigned int wdtwqenc;	/* offset 0x060 */
+	unsigned int resv4[39];
+	unsigned int wdt_unfr;	/* offset 0x100 */
+};
+
+struct omap3_wdt_priv {
+	struct wd_timer *regs;
+	unsigned int wdt_trgr_pattern;
+};
+
+#endif /* __OMAP_WDT_H__ */
diff --git a/roms/u-boot/arch/arm/include/asm/ti-common/sys_proto.h b/roms/u-boot/arch/arm/include/asm/ti-common/sys_proto.h
new file mode 100644
index 000000000..a96a8382f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ti-common/sys_proto.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014
+ * Texas Instruments, <www.ti.com>
+ */
+#ifndef _TI_COMMON_SYS_PROTO_H_
+#define _TI_COMMON_SYS_PROTO_H_
+
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define TI_ARMV7_DRAM_ADDR_SPACE_START	0x80000000
+#define TI_ARMV7_DRAM_ADDR_SPACE_END	0xFFFFFFFF
+
+#define OMAP_INIT_CONTEXT_SPL			0
+#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR	1
+#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL	2
+#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH	3
+
+static inline u32 running_from_sdram(void)
+{
+	u32 pc;
+	asm volatile ("mov %0, pc" : "=r" (pc));
+	return ((pc >= TI_ARMV7_DRAM_ADDR_SPACE_START) &&
+	    (pc < TI_ARMV7_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+	/*
+	 * u-boot can be running from sdram either because of configuration
+	 * Header or by SPL. If because of CH, then the romcode sets the
+	 * CHSETTINGS executed bit to true in the boot parameter structure that
+	 * it passes to the bootloader.This parameter is stored in the ch_flags
+	 * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
+	 * mandatory section if CH is present.
+	 */
+	if (gd->arch.omap_ch_flags & CH_FLAGS_CHSETTINGS)
+		return 0;
+	else
+		return running_from_sdram();
+}
+
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ *  1. SPL running from SRAM
+ *  2. U-Boot running from FLASH
+ *  3. Non-XIP U-Boot loaded to SDRAM by SPL
+ *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ *     Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap_hw_init_context(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	return OMAP_INIT_CONTEXT_SPL;
+#else
+	if (uboot_loaded_by_spl())
+		return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
+	else if (running_from_sdram())
+		return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
+	else
+		return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
+#endif
+}
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/ti-common/ti-aemif.h b/roms/u-boot/arch/arm/include/asm/ti-common/ti-aemif.h
new file mode 100644
index 000000000..a77538673
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ti-common/ti-aemif.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * AEMIF definitions
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef _AEMIF_H_
+#define _AEMIF_H_
+
+#define AEMIF_NUM_CS               4
+#define AEMIF_MODE_NOR             0
+#define AEMIF_MODE_NAND            1
+#define AEMIF_MODE_ONENAND         2
+#define AEMIF_PRESERVE             -1
+
+struct aemif_config {
+	unsigned mode;
+	unsigned select_strobe;
+	unsigned extend_wait;
+	unsigned wr_setup;
+	unsigned wr_strobe;
+	unsigned wr_hold;
+	unsigned rd_setup;
+	unsigned rd_strobe;
+	unsigned rd_hold;
+	unsigned turn_around;
+	enum {
+		AEMIF_WIDTH_8	= 0,
+		AEMIF_WIDTH_16	= 1,
+		AEMIF_WIDTH_32	= 2,
+	} width;
+};
+
+void aemif_init(int num_cs, struct aemif_config *config);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/ti-common/ti-edma3.h b/roms/u-boot/arch/arm/include/asm/ti-common/ti-edma3.h
new file mode 100644
index 000000000..9abdbc88e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/ti-common/ti-edma3.h
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Enhanced Direct Memory Access (EDMA3) Controller
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef _EDMA3_H_
+#define _EDMA3_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+#include <linux/stddef.h>
+
+#define EDMA3_PARSET_NULL_LINK			0xffff
+
+/*
+ * All parameter RAM set options
+ * opt field in edma3_param_set_config structure
+ */
+#define EDMA3_SLOPT_PRIV_LEVEL			BIT(31)
+#define EDMA3_SLOPT_PRIV_ID(id)			((0xf & (id)) << 24)
+#define EDMA3_SLOPT_INTERM_COMP_CHAIN_ENB	BIT(23)
+#define EDMA3_SLOPT_TRANS_COMP_CHAIN_ENB	BIT(22)
+#define EDMA3_SLOPT_INTERM_COMP_INT_ENB		BIT(21)
+#define EDMA3_SLOPT_TRANS_COMP_INT_ENB		BIT(20)
+#define EDMA3_SLOPT_COMP_CODE(code)		((0x3f & (code)) << 12)
+#define EDMA3_SLOPT_FIFO_WIDTH_8		0
+#define EDMA3_SLOPT_FIFO_WIDTH_16		(1 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_32		(2 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_64		(3 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_128		(4 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_256		(5 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_SET(w)		((w & 0x7) << 8)
+#define EDMA3_SLOPT_STATIC			BIT(3)
+#define EDMA3_SLOPT_AB_SYNC			BIT(2)
+#define EDMA3_SLOPT_DST_ADDR_CONST_MODE		BIT(1)
+#define EDMA3_SLOPT_SRC_ADDR_CONST_MODE		BIT(0)
+
+enum edma3_address_mode {
+	INCR = 0,
+	FIFO = 1
+};
+
+enum edma3_fifo_width {
+	W8BIT = 0,
+	W16BIT = 1,
+	W32BIT = 2,
+	W64BIT = 3,
+	W128BIT = 4,
+	W256BIT = 5
+};
+
+enum edma3_sync_dimension {
+	ASYNC = 0,
+	ABSYNC = 1
+};
+
+/* PaRAM slots are laid out like this */
+struct edma3_slot_layout {
+	u32 opt;
+	u32 src;
+	u32 a_b_cnt;
+	u32 dst;
+	u32 src_dst_bidx;
+	u32 link_bcntrld;
+	u32 src_dst_cidx;
+	u32 ccnt;
+} __packed;
+
+/*
+ * Use this to assign trigger word number of edma3_slot_layout struct.
+ * trigger_word_name - is the exact name from edma3_slot_layout.
+ */
+#define EDMA3_TWORD(trigger_word_name)\
+		(offsetof(struct edma3_slot_layout, trigger_word_name) / 4)
+
+struct edma3_slot_config {
+	u32 opt;
+	u32 src;
+	u32 dst;
+	int bcnt;
+	int acnt;
+	int ccnt;
+	int src_bidx;
+	int dst_bidx;
+	int src_cidx;
+	int dst_cidx;
+	int bcntrld;
+	int link;
+};
+
+struct edma3_channel_config {
+	int slot;
+	int chnum;
+	int complete_code;	/* indicate pending complete interrupt */
+	int trigger_slot_word;	/* only used for qedma */
+};
+
+void qedma3_start(u32 base, struct edma3_channel_config *cfg);
+void qedma3_stop(u32 base, struct edma3_channel_config *cfg);
+void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg);
+int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg);
+void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param);
+void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param);
+
+void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode,
+		    enum edma3_fifo_width width);
+void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx);
+void edma3_set_dest_addr(u32 base, int slot, u32 dst);
+
+void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode,
+		   enum edma3_fifo_width width);
+void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx);
+void edma3_set_src_addr(u32 base, int slot, u32 src);
+
+void edma3_set_transfer_params(u32 base, int slot, int acnt,
+			       int bcnt, int ccnt, u16 bcnt_rld,
+			       enum edma3_sync_dimension sync_mode);
+void edma3_transfer(unsigned long edma3_base_addr, unsigned int
+		edma_slot_num, void *dst, void *src, size_t len);
+void edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num,
+		void *dst, u8 val, size_t len);
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/types.h b/roms/u-boot/arch/arm/include/asm/types.h
new file mode 100644
index 000000000..900b2619a
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/types.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_ARM_TYPES_H
+#define __ASM_ARM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+typedef unsigned short umode_t;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifdef	CONFIG_ARM64
+#define BITS_PER_LONG 64
+#else	/* CONFIG_ARM64 */
+#define BITS_PER_LONG 32
+#endif	/* CONFIG_ARM64 */
+
+#ifdef CONFIG_PHYS_64BIT
+typedef unsigned long long phys_addr_t;
+typedef unsigned long long phys_size_t;
+#else
+/* DMA addresses are 32-bits wide */
+typedef unsigned long phys_addr_t;
+typedef unsigned long phys_size_t;
+#endif
+
+/*
+ * A dma_addr_t can hold any valid DMA address, i.e., any address returned
+ * by the DMA API.
+ *
+ * If the DMA API only uses 32-bit addresses, dma_addr_t need only be 32
+ * bits wide.  Bus addresses, e.g., PCI BARs, may be wider than 32 bits,
+ * but drivers do memory-mapped I/O to ioremapped kernel virtual addresses,
+ * so they don't care about the size of the actual bus addresses.
+ */
+#ifdef CONFIG_DMA_ADDR_T_64BIT
+typedef unsigned long long dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/u-boot-arm.h b/roms/u-boot/arch/arm/include/asm/u-boot-arm.h
new file mode 100644
index 000000000..0b93cc48c
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/u-boot-arm.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+#ifndef _U_BOOT_ARM_H_
+#define _U_BOOT_ARM_H_	1
+
+#ifndef __ASSEMBLY__
+
+/* for the following variables, see start.S */
+extern ulong IRQ_STACK_START;	/* top of IRQ stack */
+extern ulong FIQ_STACK_START;	/* top of FIQ stack */
+extern ulong _datarel_start_ofs;
+extern ulong _datarelrolocal_start_ofs;
+extern ulong _datarellocal_start_ofs;
+extern ulong _datarelro_start_ofs;
+extern ulong IRQ_STACK_START_IN;	/* 8 bytes in IRQ stack */
+
+void s_init(void);
+
+/* cpu/.../cpu.c */
+int	cleanup_before_linux(void);
+
+/* Set up ARMv7 MMU, caches and TLBs */
+void	cpu_init_cp15(void);
+
+/* cpu/.../arch/cpu.c */
+int	arch_misc_init(void);
+
+/* board/.../... */
+int	board_init(void);
+
+/* calls to c from vectors.S */
+struct pt_regs;
+
+void bad_mode(void);
+void do_undefined_instruction(struct pt_regs *pt_regs);
+void do_software_interrupt(struct pt_regs *pt_regs);
+void do_prefetch_abort(struct pt_regs *pt_regs);
+void do_data_abort(struct pt_regs *pt_regs);
+void do_not_used(struct pt_regs *pt_regs);
+#ifdef CONFIG_ARM64
+void do_fiq(struct pt_regs *pt_regs, unsigned int esr);
+void do_irq(struct pt_regs *pt_regs, unsigned int esr);
+#else
+void do_fiq(struct pt_regs *pt_regs);
+void do_irq(struct pt_regs *pt_regswq);
+#endif
+
+void reset_misc(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif	/* _U_BOOT_ARM_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/u-boot.h b/roms/u-boot/arch/arm/include/asm/u-boot.h
new file mode 100644
index 000000000..07528a46f
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/u-boot.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ ********************************************************************
+ * NOTE: This header file defines an interface to U-Boot. Including
+ * this (unmodified) header file in another file is considered normal
+ * use of U-Boot, and does *not* fall under the heading of "derived
+ * work".
+ ********************************************************************
+ */
+
+#ifndef _U_BOOT_H_
+#define _U_BOOT_H_	1
+
+/* Use the generic board which requires a unified bd_info */
+#include <asm-generic/u-boot.h>
+#include <asm/u-boot-arm.h>
+
+/* For image.h:image_check_target_arch() */
+#ifndef CONFIG_ARM64
+#define IH_ARCH_DEFAULT IH_ARCH_ARM
+#else
+#define IH_ARCH_DEFAULT IH_ARCH_ARM64
+#endif
+
+#endif	/* _U_BOOT_H_ */
diff --git a/roms/u-boot/arch/arm/include/asm/unaligned.h b/roms/u-boot/arch/arm/include/asm/unaligned.h
new file mode 100644
index 000000000..0a228fb8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/unaligned.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_ARM_UNALIGNED_H
+#define _ASM_ARM_UNALIGNED_H
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+/*
+ * Select endianness
+ */
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+#else
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+#endif
+
+#endif /* _ASM_ARM_UNALIGNED_H */
diff --git a/roms/u-boot/arch/arm/include/asm/unified.h b/roms/u-boot/arch/arm/include/asm/unified.h
new file mode 100644
index 000000000..2fae54ebd
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/unified.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+	.syntax unified
+#endif
+
+#ifdef CONFIG_CPU_V7M
+#define AR_CLASS(x...)
+#define M_CLASS(x...)	x
+#else
+#define AR_CLASS(x...)	x
+#define M_CLASS(x...)
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE	PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...)	x
+#ifdef __ASSEMBLY__
+#define W(instr)	instr.w
+#else
+#define WASM(instr)	#instr ".w"
+#endif
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE	0
+
+#define ARM(x...)	x
+#define THUMB(x...)
+#ifdef __ASSEMBLY__
+#define W(instr)	instr
+#else
+#define WASM(instr)	#instr
+#endif
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+	.macro	it, cond
+	.endm
+	.macro	itt, cond
+	.endm
+	.macro	ite, cond
+	.endm
+	.macro	ittt, cond
+	.endm
+	.macro	itte, cond
+	.endm
+	.macro	itet, cond
+	.endm
+	.macro	itee, cond
+	.endm
+	.macro	itttt, cond
+	.endm
+	.macro	ittte, cond
+	.endm
+	.macro	ittet, cond
+	.endm
+	.macro	ittee, cond
+	.endm
+	.macro	itett, cond
+	.endm
+	.macro	itete, cond
+	.endm
+	.macro	iteet, cond
+	.endm
+	.macro	iteee, cond
+	.endm
+#else	/* !__ASSEMBLY__ */
+__asm__(
+"	.macro	it, cond\n"
+"	.endm\n"
+"	.macro	itt, cond\n"
+"	.endm\n"
+"	.macro	ite, cond\n"
+"	.endm\n"
+"	.macro	ittt, cond\n"
+"	.endm\n"
+"	.macro	itte, cond\n"
+"	.endm\n"
+"	.macro	itet, cond\n"
+"	.endm\n"
+"	.macro	itee, cond\n"
+"	.endm\n"
+"	.macro	itttt, cond\n"
+"	.endm\n"
+"	.macro	ittte, cond\n"
+"	.endm\n"
+"	.macro	ittet, cond\n"
+"	.endm\n"
+"	.macro	ittee, cond\n"
+"	.endm\n"
+"	.macro	itett, cond\n"
+"	.endm\n"
+"	.macro	itete, cond\n"
+"	.endm\n"
+"	.macro	iteet, cond\n"
+"	.endm\n"
+"	.macro	iteee, cond\n"
+"	.endm\n");
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* CONFIG_ARM_ASM_UNIFIED */
+
+#endif	/* !__ASM_UNIFIED_H */
diff --git a/roms/u-boot/arch/arm/include/asm/utils.h b/roms/u-boot/arch/arm/include/asm/utils.h
new file mode 100644
index 000000000..eee60c50e
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/utils.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ */
+#ifndef _UTILS_H_
+#define _UTILS_H_
+
+static inline s32 log_2_n_round_up(u32 n)
+{
+	s32 log2n = -1;
+	u32 temp = n;
+
+	while (temp) {
+		log2n++;
+		temp >>= 1;
+	}
+
+	if (n & (n - 1))
+		return log2n + 1; /* not power of 2 - round up */
+	else
+		return log2n; /* power of 2 */
+}
+
+static inline s32 log_2_n_round_down(u32 n)
+{
+	s32 log2n = -1;
+	u32 temp = n;
+
+	while (temp) {
+		log2n++;
+		temp >>= 1;
+	}
+
+	return log2n;
+}
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/asm/xen.h b/roms/u-boot/arch/arm/include/asm/xen.h
new file mode 100644
index 000000000..8e2ee3d64
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/xen.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) 2020 EPAM Systems Inc.
+ */
+
+extern unsigned long rom_pointer[];
+
diff --git a/roms/u-boot/arch/arm/include/asm/xen/hypercall.h b/roms/u-boot/arch/arm/include/asm/xen/hypercall.h
new file mode 100644
index 000000000..a4fd07707
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/xen/hypercall.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * hypercall.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
+ */
+
+#ifndef _ASM_ARM_XEN_HYPERCALL_H
+#define _ASM_ARM_XEN_HYPERCALL_H
+
+#include <xen/interface/xen.h>
+
+int HYPERVISOR_xen_version(int cmd, void *arg);
+int HYPERVISOR_console_io(int cmd, int count, char *str);
+int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count);
+int HYPERVISOR_sched_op(int cmd, void *arg);
+int HYPERVISOR_event_channel_op(int cmd, void *arg);
+unsigned long HYPERVISOR_hvm_op(int op, void *arg);
+int HYPERVISOR_memory_op(unsigned int cmd, void *arg);
+#endif /* _ASM_ARM_XEN_HYPERCALL_H */
diff --git a/roms/u-boot/arch/arm/include/asm/xen/system.h b/roms/u-boot/arch/arm/include/asm/xen/system.h
new file mode 100644
index 000000000..0fc8a7995
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/asm/xen/system.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * (C) 2014 Karim Allah Ahmed <karim.allah.ahmed@gmail.com>
+ * (C) 2020, EPAM Systems Inc.
+ */
+#ifndef _ASM_ARM_XEN_SYSTEM_H
+#define _ASM_ARM_XEN_SYSTEM_H
+
+#include <compiler.h>
+#include <asm/bitops.h>
+
+/* If *ptr == old, then store new there (and return new).
+ * Otherwise, return the old value.
+ * Atomic.
+ */
+#define synch_cmpxchg(ptr, old, new) \
+({ __typeof__(*ptr) stored = old; \
+	__atomic_compare_exchange_n(ptr, &stored, new, 0, __ATOMIC_SEQ_CST, __ATOMIC_SEQ_CST) ? new : old; \
+})
+
+/* As test_and_clear_bit, but using __ATOMIC_SEQ_CST */
+static inline int synch_test_and_clear_bit(int nr, volatile void *addr)
+{
+	u8 *byte = ((u8 *)addr) + (nr >> 3);
+	u8 bit = 1 << (nr & 7);
+	u8 orig;
+
+	orig = __atomic_fetch_and(byte, ~bit, __ATOMIC_SEQ_CST);
+
+	return (orig & bit) != 0;
+}
+
+/* As test_and_set_bit, but using __ATOMIC_SEQ_CST */
+static inline int synch_test_and_set_bit(int nr, volatile void *base)
+{
+	u8 *byte = ((u8 *)base) + (nr >> 3);
+	u8 bit = 1 << (nr & 7);
+	u8 orig;
+
+	orig = __atomic_fetch_or(byte, bit, __ATOMIC_SEQ_CST);
+
+	return (orig & bit) != 0;
+}
+
+/* As set_bit, but using __ATOMIC_SEQ_CST */
+static inline void synch_set_bit(int nr, volatile void *addr)
+{
+	synch_test_and_set_bit(nr, addr);
+}
+
+/* As clear_bit, but using __ATOMIC_SEQ_CST */
+static inline void synch_clear_bit(int nr, volatile void *addr)
+{
+	synch_test_and_clear_bit(nr, addr);
+}
+
+/* As test_bit, but with a following memory barrier. */
+//static inline int synch_test_bit(int nr, volatile void *addr)
+static inline int synch_test_bit(int nr, const void *addr)
+{
+	int result;
+
+	result = test_bit(nr, addr);
+	barrier();
+	return result;
+}
+
+#define xchg(ptr, v)	__atomic_exchange_n(ptr, v, __ATOMIC_SEQ_CST)
+#define xchg(ptr, v)	__atomic_exchange_n(ptr, v, __ATOMIC_SEQ_CST)
+
+#define xen_mb()	mb()
+#define xen_rmb()	rmb()
+#define xen_wmb()	wmb()
+
+#define to_phys(x)		((unsigned long)(x))
+#define to_virt(x)		((void *)(x))
+
+#define PFN_UP(x)		(unsigned long)(((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
+#define PFN_DOWN(x)		(unsigned long)((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x)		((unsigned long)(x) << PAGE_SHIFT)
+#define PHYS_PFN(x)		(unsigned long)((x) >> PAGE_SHIFT)
+
+#define virt_to_pfn(_virt)	(PFN_DOWN(to_phys(_virt)))
+#define virt_to_mfn(_virt)	(PFN_DOWN(to_phys(_virt)))
+#define mfn_to_virt(_mfn)	(to_virt(PFN_PHYS(_mfn)))
+#define pfn_to_virt(_pfn)	(to_virt(PFN_PHYS(_pfn)))
+
+#endif
diff --git a/roms/u-boot/arch/arm/include/debug/8250.S b/roms/u-boot/arch/arm/include/debug/8250.S
new file mode 100644
index 000000000..5e37536af
--- /dev/null
+++ b/roms/u-boot/arch/arm/include/debug/8250.S
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * arch/arm/include/debug/8250.S
+ *
+ *  Copyright (C) 1994-2013 Russell King
+ */
+#include <linux/serial_reg.h>
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+		.endm
+
+#ifdef CONFIG_DEBUG_UART_8250_WORD
+		.macro	store, rd, rx:vararg
+		str	\rd, \rx
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldr	\rd, \rx
+		.endm
+#else
+		.macro	store, rd, rx:vararg
+		strb	\rd, \rx
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldrb	\rd, \rx
+		.endm
+#endif
+
+#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT
+
+		.macro	senduart,rd,rx
+		store	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		load	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL
+1001:		load	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+#endif
+		.endm
diff --git a/roms/u-boot/arch/arm/lib/Makefile b/roms/u-boot/arch/arm/lib/Makefile
new file mode 100644
index 000000000..7f6633271
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/Makefile
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+lib-$(CONFIG_USE_PRIVATE_LIBGCC) += ashldi3.o ashrdi3.o lshrdi3.o \
+				    lib1funcs.o uldivmod.o div0.o \
+				    div64.o muldi3.o
+
+ifdef CONFIG_CPU_V7M
+obj-y	+= vectors_m.o crt0.o
+else ifdef CONFIG_ARM64
+obj-y	+= crt0_64.o
+else
+obj-y	+= vectors.o crt0.o
+endif
+
+ifdef CONFIG_ARM64
+obj-y   += setjmp_aarch64.o
+else
+obj-y   += setjmp.o
+endif
+
+ifndef CONFIG_SPL_BUILD
+ifdef CONFIG_ARM64
+obj-y	+= relocate_64.o
+else
+obj-y	+= relocate.o
+endif
+
+obj-$(CONFIG_CPU_V7M) += cmd_boot.o
+obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
+obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o
+obj-$(CONFIG_CMD_BOOTM) += bootm.o
+obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o
+obj-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
+else
+obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
+obj-$(CONFIG_SPL_FRAMEWORK) += zimage.o
+obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
+endif
+obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
+obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o
+obj-$(CONFIG_SEMIHOSTING) += semihosting.o
+
+obj-y	+= bdinfo.o
+obj-y	+= sections.o
+CFLAGS_REMOVE_sections.o := $(LTO_CFLAGS)
+
+obj-y	+= stack.o
+ifdef CONFIG_CPU_V7M
+obj-y	+= interrupts_m.o
+else ifdef CONFIG_ARM64
+obj-$(CONFIG_FSL_LAYERSCAPE) += ccn504.o
+ifneq ($(CONFIG_GICV2)$(CONFIG_GICV3),)
+obj-y	+= gic_64.o
+endif
+obj-$(CONFIG_GIC_V3_ITS)	+= gic-v3-its.o
+obj-y	+= interrupts_64.o
+else
+obj-y	+= interrupts.o
+endif
+ifndef CONFIG_$(SPL_TPL_)SYSRESET
+obj-y	+= reset.o
+endif
+
+obj-y	+= cache.o
+obj-$(CONFIG_SYS_ARM_CACHE_CP15)	+= cache-cp15.o
+CFLAGS_REMOVE_cache-cp15.o := $(LTO_CFLAGS)
+
+obj-y	+= psci-dt.o
+
+obj-$(CONFIG_DEBUG_LL)	+= debug.o
+
+# For EABI conformant tool chains, provide eabi_compat()
+ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
+extra-y	+= eabi_compat.o
+endif
+
+# some files can only build in ARM or THUMB2, not THUMB1
+
+ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+asflags-$(CONFIG_HAS_THUMB2) += -DCONFIG_THUMB2_KERNEL
+ifndef CONFIG_HAS_THUMB2
+
+# for C files, just apend -marm, which will override previous -mthumb*
+
+ifndef CONFIG_ARM64
+CFLAGS_cache.o := -marm
+CFLAGS_cache-cp15.o := -marm
+endif
+
+# For .S, drop -mthumb* and other thumb-related options.
+# CFLAGS_REMOVE_* would not have an effet, so AFLAGS_REMOVE_*
+# was implemented and is used here.
+# Also, define ${target}_NO_THUMB_BUILD for these two targets
+# so that the code knows it should not use Thumb.
+
+AFLAGS_REMOVE_memset.o := -mthumb -mthumb-interwork
+AFLAGS_REMOVE_memcpy.o := -mthumb -mthumb-interwork
+AFLAGS_memset.o := -DMEMSET_NO_THUMB_BUILD
+AFLAGS_memcpy.o := -DMEMCPY_NO_THUMB_BUILD
+endif
+endif
+
+# For building EFI apps
+CFLAGS_$(EFI_CRT0) := $(CFLAGS_EFI)
+CFLAGS_REMOVE_$(EFI_CRT0) := $(CFLAGS_NON_EFI)
+
+CFLAGS_$(EFI_RELOC) := $(CFLAGS_EFI)
+CFLAGS_REMOVE_$(EFI_RELOC) := $(CFLAGS_NON_EFI)
+
+extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
+# TODO: As of v2019.01 the relocation code for the EFI application cannot
+# be built on ARMv7-M.
+ifndef CONFIG_CPU_V7M
+#extra-$(CONFIG_CMD_BOOTEFI_SELFTEST) += $(EFI_CRT0) $(EFI_RELOC)
+endif
+extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC)
diff --git a/roms/u-boot/arch/arm/lib/ashldi3.S b/roms/u-boot/arch/arm/lib/ashldi3.S
new file mode 100644
index 000000000..6330de483
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/ashldi3.S
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+.pushsection .text.__ashldi3, "ax"
+ENTRY(__ashldi3)
+ENTRY(__aeabi_llsl)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	ah, ah, lsl r2
+	movpl	ah, al, lsl r3
+ ARM(	orrmi	ah, ah, al, lsr ip	)
+ THUMB(	lsrmi	r3, al, ip		)
+ THUMB(	orrmi	ah, ah, r3		)
+	mov	al, al, lsl r2
+	ret	lr
+
+ENDPROC(__ashldi3)
+ENDPROC(__aeabi_llsl)
+.popsection
diff --git a/roms/u-boot/arch/arm/lib/ashrdi3.S b/roms/u-boot/arch/arm/lib/ashrdi3.S
new file mode 100644
index 000000000..642031234
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/ashrdi3.S
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+.pushsection .text.__ashrdi3, "ax"
+ENTRY(__ashrdi3)
+ENTRY(__aeabi_lasr)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	al, al, lsr r2
+	movpl	al, ah, asr r3
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
+	mov	ah, ah, asr r2
+	ret	lr
+
+ENDPROC(__ashrdi3)
+ENDPROC(__aeabi_lasr)
+.popsection
diff --git a/roms/u-boot/arch/arm/lib/asm-offsets.c b/roms/u-boot/arch/arm/lib/asm-offsets.c
new file mode 100644
index 000000000..1a306ec41
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/asm-offsets.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
+ *
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <common.h>
+#include <linux/kbuild.h>
+#include <linux/arm-smccc.h>
+
+#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) \
+	|| defined(CONFIG_MX51) || defined(CONFIG_MX53)
+#include <asm/arch/imx-regs.h>
+#endif
+
+int main(void)
+{
+	/*
+	 * TODO : Check if each entry in this file is really necessary.
+	 *   - struct esdramc_regs
+	 *   - struct max_regs
+	 *   - struct aips_regs
+	 *   - struct aipi_regs
+	 *   - struct clkctl
+	 *   - struct dpll
+	 * are used only for generating asm-offsets.h.
+	 * It means their offset addresses are referenced only from assembly
+	 * code. Is it better to define the macros directly in headers?
+	 */
+
+#if defined(CONFIG_MX25)
+	/* Clock Control Module */
+	DEFINE(CCM_CCTL, offsetof(struct ccm_regs, cctl));
+	DEFINE(CCM_CGCR0, offsetof(struct ccm_regs, cgr0));
+	DEFINE(CCM_CGCR1, offsetof(struct ccm_regs, cgr1));
+	DEFINE(CCM_CGCR2, offsetof(struct ccm_regs, cgr2));
+	DEFINE(CCM_PCDR2, offsetof(struct ccm_regs, pcdr[2]));
+	DEFINE(CCM_MCR, offsetof(struct ccm_regs, mcr));
+
+	/* Enhanced SDRAM Controller */
+	DEFINE(ESDRAMC_ESDCTL0, offsetof(struct esdramc_regs, ctl0));
+	DEFINE(ESDRAMC_ESDCFG0, offsetof(struct esdramc_regs, cfg0));
+	DEFINE(ESDRAMC_ESDMISC, offsetof(struct esdramc_regs, misc));
+
+	/* Multi-Layer AHB Crossbar Switch */
+	DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0));
+	DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0));
+	DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1));
+	DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1));
+	DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2));
+	DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2));
+	DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3));
+	DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3));
+	DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4));
+	DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4));
+	DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0));
+	DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1));
+	DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2));
+	DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3));
+	DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4));
+
+	/* AHB <-> IP-Bus Interface */
+	DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7));
+	DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15));
+#endif
+
+#if defined(CONFIG_MX27)
+	DEFINE(AIPI1_PSR0, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr0));
+	DEFINE(AIPI1_PSR1, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr1));
+	DEFINE(AIPI2_PSR0, IMX_AIPI2_BASE + offsetof(struct aipi_regs, psr0));
+	DEFINE(AIPI2_PSR1, IMX_AIPI2_BASE + offsetof(struct aipi_regs, psr1));
+
+	DEFINE(CSCR, IMX_PLL_BASE + offsetof(struct pll_regs, cscr));
+	DEFINE(MPCTL0, IMX_PLL_BASE + offsetof(struct pll_regs, mpctl0));
+	DEFINE(SPCTL0, IMX_PLL_BASE + offsetof(struct pll_regs, spctl0));
+	DEFINE(PCDR0, IMX_PLL_BASE + offsetof(struct pll_regs, pcdr0));
+	DEFINE(PCDR1, IMX_PLL_BASE + offsetof(struct pll_regs, pcdr1));
+	DEFINE(PCCR0, IMX_PLL_BASE + offsetof(struct pll_regs, pccr0));
+	DEFINE(PCCR1, IMX_PLL_BASE + offsetof(struct pll_regs, pccr1));
+
+	DEFINE(ESDCTL0_ROF, offsetof(struct esdramc_regs, esdctl0));
+	DEFINE(ESDCFG0_ROF, offsetof(struct esdramc_regs, esdcfg0));
+	DEFINE(ESDCTL1_ROF, offsetof(struct esdramc_regs, esdctl1));
+	DEFINE(ESDCFG1_ROF, offsetof(struct esdramc_regs, esdcfg1));
+	DEFINE(ESDMISC_ROF, offsetof(struct esdramc_regs, esdmisc));
+
+	DEFINE(GPCR, IMX_SYSTEM_CTL_BASE +
+		offsetof(struct system_control_regs, gpcr));
+	DEFINE(FMCR, IMX_SYSTEM_CTL_BASE +
+		offsetof(struct system_control_regs, fmcr));
+#endif
+
+#if defined(CONFIG_MX35)
+	/* Round up to make sure size gives nice stack alignment */
+	DEFINE(CLKCTL_CCMR, offsetof(struct ccm_regs, ccmr));
+	DEFINE(CLKCTL_PDR0, offsetof(struct ccm_regs, pdr0));
+	DEFINE(CLKCTL_PDR1, offsetof(struct ccm_regs, pdr1));
+	DEFINE(CLKCTL_PDR2, offsetof(struct ccm_regs, pdr2));
+	DEFINE(CLKCTL_PDR3, offsetof(struct ccm_regs, pdr3));
+	DEFINE(CLKCTL_PDR4, offsetof(struct ccm_regs, pdr4));
+	DEFINE(CLKCTL_RCSR, offsetof(struct ccm_regs, rcsr));
+	DEFINE(CLKCTL_MPCTL, offsetof(struct ccm_regs, mpctl));
+	DEFINE(CLKCTL_PPCTL, offsetof(struct ccm_regs, ppctl));
+	DEFINE(CLKCTL_ACMR, offsetof(struct ccm_regs, acmr));
+	DEFINE(CLKCTL_COSR, offsetof(struct ccm_regs, cosr));
+	DEFINE(CLKCTL_CGR0, offsetof(struct ccm_regs, cgr0));
+	DEFINE(CLKCTL_CGR1, offsetof(struct ccm_regs, cgr1));
+	DEFINE(CLKCTL_CGR2, offsetof(struct ccm_regs, cgr2));
+	DEFINE(CLKCTL_CGR3, offsetof(struct ccm_regs, cgr3));
+
+	/* Multi-Layer AHB Crossbar Switch */
+	DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0));
+	DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0));
+	DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1));
+	DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1));
+	DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2));
+	DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2));
+	DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3));
+	DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3));
+	DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4));
+	DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4));
+	DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0));
+	DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1));
+	DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2));
+	DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3));
+	DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4));
+	DEFINE(MAX_MGPCR5, offsetof(struct max_regs, mgpcr5));
+
+	/* AHB <-> IP-Bus Interface */
+	DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7));
+	DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15));
+	DEFINE(AIPS_PACR_0_7, offsetof(struct aips_regs, pacr_0_7));
+	DEFINE(AIPS_PACR_8_15, offsetof(struct aips_regs, pacr_8_15));
+	DEFINE(AIPS_PACR_16_23, offsetof(struct aips_regs, pacr_16_23));
+	DEFINE(AIPS_PACR_24_31, offsetof(struct aips_regs, pacr_24_31));
+	DEFINE(AIPS_OPACR_0_7, offsetof(struct aips_regs, opacr_0_7));
+	DEFINE(AIPS_OPACR_8_15, offsetof(struct aips_regs, opacr_8_15));
+	DEFINE(AIPS_OPACR_16_23, offsetof(struct aips_regs, opacr_16_23));
+	DEFINE(AIPS_OPACR_24_31, offsetof(struct aips_regs, opacr_24_31));
+	DEFINE(AIPS_OPACR_32_39, offsetof(struct aips_regs, opacr_32_39));
+#endif
+
+#if defined(CONFIG_MX51) || defined(CONFIG_MX53)
+	/* Round up to make sure size gives nice stack alignment */
+	DEFINE(CLKCTL_CCMR, offsetof(struct clkctl, ccr));
+	DEFINE(CLKCTL_CCDR, offsetof(struct clkctl, ccdr));
+	DEFINE(CLKCTL_CSR, offsetof(struct clkctl, csr));
+	DEFINE(CLKCTL_CCSR, offsetof(struct clkctl, ccsr));
+	DEFINE(CLKCTL_CACRR, offsetof(struct clkctl, cacrr));
+	DEFINE(CLKCTL_CBCDR, offsetof(struct clkctl, cbcdr));
+	DEFINE(CLKCTL_CBCMR, offsetof(struct clkctl, cbcmr));
+	DEFINE(CLKCTL_CSCMR1, offsetof(struct clkctl, cscmr1));
+	DEFINE(CLKCTL_CSCMR2, offsetof(struct clkctl, cscmr2));
+	DEFINE(CLKCTL_CSCDR1, offsetof(struct clkctl, cscdr1));
+	DEFINE(CLKCTL_CS1CDR, offsetof(struct clkctl, cs1cdr));
+	DEFINE(CLKCTL_CS2CDR, offsetof(struct clkctl, cs2cdr));
+	DEFINE(CLKCTL_CDCDR, offsetof(struct clkctl, cdcdr));
+	DEFINE(CLKCTL_CHSCCDR, offsetof(struct clkctl, chsccdr));
+	DEFINE(CLKCTL_CSCDR2, offsetof(struct clkctl, cscdr2));
+	DEFINE(CLKCTL_CSCDR3, offsetof(struct clkctl, cscdr3));
+	DEFINE(CLKCTL_CSCDR4, offsetof(struct clkctl, cscdr4));
+	DEFINE(CLKCTL_CWDR, offsetof(struct clkctl, cwdr));
+	DEFINE(CLKCTL_CDHIPR, offsetof(struct clkctl, cdhipr));
+	DEFINE(CLKCTL_CDCR, offsetof(struct clkctl, cdcr));
+	DEFINE(CLKCTL_CTOR, offsetof(struct clkctl, ctor));
+	DEFINE(CLKCTL_CLPCR, offsetof(struct clkctl, clpcr));
+	DEFINE(CLKCTL_CISR, offsetof(struct clkctl, cisr));
+	DEFINE(CLKCTL_CIMR, offsetof(struct clkctl, cimr));
+	DEFINE(CLKCTL_CCOSR, offsetof(struct clkctl, ccosr));
+	DEFINE(CLKCTL_CGPR, offsetof(struct clkctl, cgpr));
+	DEFINE(CLKCTL_CCGR0, offsetof(struct clkctl, ccgr0));
+	DEFINE(CLKCTL_CCGR1, offsetof(struct clkctl, ccgr1));
+	DEFINE(CLKCTL_CCGR2, offsetof(struct clkctl, ccgr2));
+	DEFINE(CLKCTL_CCGR3, offsetof(struct clkctl, ccgr3));
+	DEFINE(CLKCTL_CCGR4, offsetof(struct clkctl, ccgr4));
+	DEFINE(CLKCTL_CCGR5, offsetof(struct clkctl, ccgr5));
+	DEFINE(CLKCTL_CCGR6, offsetof(struct clkctl, ccgr6));
+	DEFINE(CLKCTL_CMEOR, offsetof(struct clkctl, cmeor));
+#if defined(CONFIG_MX53)
+	DEFINE(CLKCTL_CCGR7, offsetof(struct clkctl, ccgr7));
+#endif
+
+	/* DPLL */
+	DEFINE(PLL_DP_CTL, offsetof(struct dpll, dp_ctl));
+	DEFINE(PLL_DP_CONFIG, offsetof(struct dpll, dp_config));
+	DEFINE(PLL_DP_OP, offsetof(struct dpll, dp_op));
+	DEFINE(PLL_DP_MFD, offsetof(struct dpll, dp_mfd));
+	DEFINE(PLL_DP_MFN, offsetof(struct dpll, dp_mfn));
+	DEFINE(PLL_DP_HFS_OP, offsetof(struct dpll, dp_hfs_op));
+	DEFINE(PLL_DP_HFS_MFD, offsetof(struct dpll, dp_hfs_mfd));
+	DEFINE(PLL_DP_HFS_MFN, offsetof(struct dpll, dp_hfs_mfn));
+#endif
+
+#ifdef CONFIG_ARM_SMCCC
+	DEFINE(ARM_SMCCC_RES_X0_OFFS, offsetof(struct arm_smccc_res, a0));
+	DEFINE(ARM_SMCCC_RES_X2_OFFS, offsetof(struct arm_smccc_res, a2));
+	DEFINE(ARM_SMCCC_QUIRK_ID_OFFS, offsetof(struct arm_smccc_quirk, id));
+	DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS, offsetof(struct arm_smccc_quirk, state));
+#endif
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/lib/bdinfo.c b/roms/u-boot/arch/arm/lib/bdinfo.c
new file mode 100644
index 000000000..b22ee07b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/bdinfo.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ARM-specific information for the 'bd' command
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void arch_print_bdinfo(void)
+{
+	struct bd_info *bd = gd->bd;
+
+	bdinfo_print_num_l("arch_number", bd->bi_arch_number);
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
+		bdinfo_print_num_ll("Secure ram",
+				    gd->arch.secure_ram &
+				    MEM_RESERVE_SECURE_ADDR_MASK);
+	}
+#endif
+#ifdef CONFIG_RESV_RAM
+	if (gd->arch.resv_ram)
+		bdinfo_print_num_ll("Reserved ram", gd->arch.resv_ram);
+#endif
+#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+	bdinfo_print_num_l("TLB addr", gd->arch.tlb_addr);
+#endif
+	bdinfo_print_num_l("irq_sp", gd->irq_sp);	/* irq stack pointer */
+	bdinfo_print_num_l("sp start ", gd->start_addr_sp);
+	/*
+	 * TODO: Currently only support for davinci SOC's is added.
+	 * Remove this check once all the board implement this.
+	 */
+#ifdef CONFIG_CLOCKS
+	printf("ARM frequency = %ld MHz\n", bd->bi_arm_freq);
+	printf("DSP frequency = %ld MHz\n", bd->bi_dsp_freq);
+	printf("DDR frequency = %ld MHz\n", bd->bi_ddr_freq);
+#endif
+#ifdef CONFIG_BOARD_TYPES
+	printf("Board Type  = %ld\n", gd->board_type);
+#endif
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+	printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
+	       CONFIG_VAL(SYS_MALLOC_F_LEN));
+#endif
+}
diff --git a/roms/u-boot/arch/arm/lib/bootm-fdt.c b/roms/u-boot/arch/arm/lib/bootm-fdt.c
new file mode 100644
index 000000000..29020bd1c
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/bootm-fdt.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2013, Google Inc.
+ *
+ * Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ *  - Added prep subcommand support
+ *  - Reorganized source - modeled after powerpc version
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Copyright (C) 2001  Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+#ifdef CONFIG_ARMV7_NONSEC
+#include <asm/armv7.h>
+#endif
+#include <asm/global_data.h>
+#include <asm/psci.h>
+#include <asm/spin_table.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_FMAN_ENET
+__weak int fdt_update_ethernet_dt(void *blob)
+{
+	return 0;
+}
+#endif
+
+int arch_fixup_fdt(void *blob)
+{
+	__maybe_unused int ret = 0;
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_OF_LIBFDT)
+	struct bd_info *bd = gd->bd;
+	int bank;
+	u64 start[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		start[bank] = bd->bi_dram[bank].start;
+		size[bank] = bd->bi_dram[bank].size;
+#ifdef CONFIG_ARMV7_NONSEC
+		ret = armv7_apply_memory_carveout(&start[bank], &size[bank]);
+		if (ret)
+			return ret;
+#endif
+	}
+
+#ifdef CONFIG_OF_LIBFDT
+	ret = fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_ARMV8_SPIN_TABLE
+	ret = spin_table_update_dt(blob);
+	if (ret)
+		return ret;
+#endif
+
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV8_PSCI) || \
+	CONFIG_IS_ENABLED(SEC_FIRMWARE_ARMV8_PSCI)
+	ret = psci_update_dt(blob);
+	if (ret)
+		return ret;
+#endif
+#endif
+
+#ifdef CONFIG_FMAN_ENET
+	ret = fdt_update_ethernet_dt(blob);
+	if (ret)
+		return ret;
+#endif
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/lib/bootm.c b/roms/u-boot/arch/arm/lib/bootm.c
new file mode 100644
index 000000000..f60ee3a7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/bootm.c
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ *  - Added prep subcommand support
+ *  - Reorganized source - modeled after powerpc version
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Copyright (C) 2001  Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ */
+
+#include <common.h>
+#include <bootstage.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <lmb.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <dm/root.h>
+#include <env.h>
+#include <image.h>
+#include <u-boot/zlib.h>
+#include <asm/byteorder.h>
+#include <linux/libfdt.h>
+#include <mapmem.h>
+#include <fdt_support.h>
+#include <asm/bootm.h>
+#include <asm/secure.h>
+#include <linux/compiler.h>
+#include <bootm.h>
+#include <vxworks.h>
+#include <asm/cache.h>
+
+#ifdef CONFIG_ARMV7_NONSEC
+#include <asm/armv7.h>
+#endif
+#include <asm/setup.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct tag *params;
+
+static ulong get_sp(void)
+{
+	ulong ret;
+
+	asm("mov %0, sp" : "=r"(ret) : );
+	return ret;
+}
+
+void arch_lmb_reserve(struct lmb *lmb)
+{
+	ulong sp, bank_end;
+	int bank;
+
+	/*
+	 * Booting a (Linux) kernel image
+	 *
+	 * Allocate space for command line and board info - the
+	 * address should be as high as possible within the reach of
+	 * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
+	 * memory, which means far enough below the current stack
+	 * pointer.
+	 */
+	sp = get_sp();
+	debug("## Current stack ends at 0x%08lx ", sp);
+
+	/* adjust sp by 4K to be safe */
+	sp -= 4096;
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		if (!gd->bd->bi_dram[bank].size ||
+		    sp < gd->bd->bi_dram[bank].start)
+			continue;
+		/* Watch out for RAM at end of address space! */
+		bank_end = gd->bd->bi_dram[bank].start +
+			gd->bd->bi_dram[bank].size - 1;
+		if (sp > bank_end)
+			continue;
+		if (bank_end > gd->ram_top)
+			bank_end = gd->ram_top - 1;
+
+		lmb_reserve(lmb, sp, bank_end - sp + 1);
+		break;
+	}
+}
+
+__weak void board_quiesce_devices(void)
+{
+}
+
+/**
+ * announce_and_cleanup() - Print message and prepare for kernel boot
+ *
+ * @fake: non-zero to do everything except actually boot
+ */
+static void announce_and_cleanup(int fake)
+{
+	bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
+#ifdef CONFIG_BOOTSTAGE_FDT
+	bootstage_fdt_add_report();
+#endif
+#ifdef CONFIG_BOOTSTAGE_REPORT
+	bootstage_report();
+#endif
+
+#ifdef CONFIG_USB_DEVICE
+	udc_disconnect();
+#endif
+
+	board_quiesce_devices();
+
+	printf("\nStarting kernel ...%s\n\n", fake ?
+		"(fake run for tracing)" : "");
+	/*
+	 * Call remove function of all devices with a removal flag set.
+	 * This may be useful for last-stage operations, like cancelling
+	 * of DMA operation or releasing device internal buffers.
+	 */
+	dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL | DM_REMOVE_NON_VITAL);
+
+	/* Remove all active vital devices next */
+	dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);
+
+	cleanup_before_linux();
+}
+
+static void setup_start_tag (struct bd_info *bd)
+{
+	params = (struct tag *)bd->bi_boot_params;
+
+	params->hdr.tag = ATAG_CORE;
+	params->hdr.size = tag_size (tag_core);
+
+	params->u.core.flags = 0;
+	params->u.core.pagesize = 0;
+	params->u.core.rootdev = 0;
+
+	params = tag_next (params);
+}
+
+static void setup_memory_tags(struct bd_info *bd)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		params->hdr.tag = ATAG_MEM;
+		params->hdr.size = tag_size (tag_mem32);
+
+		params->u.mem.start = bd->bi_dram[i].start;
+		params->u.mem.size = bd->bi_dram[i].size;
+
+		params = tag_next (params);
+	}
+}
+
+static void setup_commandline_tag(struct bd_info *bd, char *commandline)
+{
+	char *p;
+
+	if (!commandline)
+		return;
+
+	/* eat leading white space */
+	for (p = commandline; *p == ' '; p++);
+
+	/* skip non-existent command lines so the kernel will still
+	 * use its default command line.
+	 */
+	if (*p == '\0')
+		return;
+
+	params->hdr.tag = ATAG_CMDLINE;
+	params->hdr.size =
+		(sizeof (struct tag_header) + strlen (p) + 1 + 4) >> 2;
+
+	strcpy (params->u.cmdline.cmdline, p);
+
+	params = tag_next (params);
+}
+
+static void setup_initrd_tag(struct bd_info *bd, ulong initrd_start,
+			     ulong initrd_end)
+{
+	/* an ATAG_INITRD node tells the kernel where the compressed
+	 * ramdisk can be found. ATAG_RDIMG is a better name, actually.
+	 */
+	params->hdr.tag = ATAG_INITRD2;
+	params->hdr.size = tag_size (tag_initrd);
+
+	params->u.initrd.start = initrd_start;
+	params->u.initrd.size = initrd_end - initrd_start;
+
+	params = tag_next (params);
+}
+
+static void setup_serial_tag(struct tag **tmp)
+{
+	struct tag *params = *tmp;
+	struct tag_serialnr serialnr;
+
+	get_board_serial(&serialnr);
+	params->hdr.tag = ATAG_SERIAL;
+	params->hdr.size = tag_size (tag_serialnr);
+	params->u.serialnr.low = serialnr.low;
+	params->u.serialnr.high= serialnr.high;
+	params = tag_next (params);
+	*tmp = params;
+}
+
+static void setup_revision_tag(struct tag **in_params)
+{
+	u32 rev = 0;
+
+	rev = get_board_rev();
+	params->hdr.tag = ATAG_REVISION;
+	params->hdr.size = tag_size (tag_revision);
+	params->u.revision.rev = rev;
+	params = tag_next (params);
+}
+
+static void setup_end_tag(struct bd_info *bd)
+{
+	params->hdr.tag = ATAG_NONE;
+	params->hdr.size = 0;
+}
+
+__weak void setup_board_tags(struct tag **in_params) {}
+
+#ifdef CONFIG_ARM64
+static void do_nonsec_virt_switch(void)
+{
+	smp_kick_all_cpus();
+	dcache_disable();	/* flush cache before swtiching to EL2 */
+}
+#endif
+
+__weak void board_prep_linux(bootm_headers_t *images) { }
+
+/* Subcommand: PREP */
+static void boot_prep_linux(bootm_headers_t *images)
+{
+	char *commandline = env_get("bootargs");
+
+	if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) {
+#ifdef CONFIG_OF_LIBFDT
+		debug("using: FDT\n");
+		if (image_setup_linux(images)) {
+			panic("FDT creation failed!");
+		}
+#endif
+	} else if (BOOTM_ENABLE_TAGS) {
+		debug("using: ATAGS\n");
+		setup_start_tag(gd->bd);
+		if (BOOTM_ENABLE_SERIAL_TAG)
+			setup_serial_tag(&params);
+		if (BOOTM_ENABLE_CMDLINE_TAG)
+			setup_commandline_tag(gd->bd, commandline);
+		if (BOOTM_ENABLE_REVISION_TAG)
+			setup_revision_tag(&params);
+		if (BOOTM_ENABLE_MEMORY_TAGS)
+			setup_memory_tags(gd->bd);
+		if (BOOTM_ENABLE_INITRD_TAG) {
+			/*
+			 * In boot_ramdisk_high(), it may relocate ramdisk to
+			 * a specified location. And set images->initrd_start &
+			 * images->initrd_end to relocated ramdisk's start/end
+			 * addresses. So use them instead of images->rd_start &
+			 * images->rd_end when possible.
+			 */
+			if (images->initrd_start && images->initrd_end) {
+				setup_initrd_tag(gd->bd, images->initrd_start,
+						 images->initrd_end);
+			} else if (images->rd_start && images->rd_end) {
+				setup_initrd_tag(gd->bd, images->rd_start,
+						 images->rd_end);
+			}
+		}
+		setup_board_tags(&params);
+		setup_end_tag(gd->bd);
+	} else {
+		panic("FDT and ATAGS support not compiled in\n");
+	}
+
+	board_prep_linux(images);
+}
+
+__weak bool armv7_boot_nonsec_default(void)
+{
+#ifdef CONFIG_ARMV7_BOOT_SEC_DEFAULT
+	return false;
+#else
+	return true;
+#endif
+}
+
+#ifdef CONFIG_ARMV7_NONSEC
+bool armv7_boot_nonsec(void)
+{
+	char *s = env_get("bootm_boot_mode");
+	bool nonsec = armv7_boot_nonsec_default();
+
+	if (s && !strcmp(s, "sec"))
+		nonsec = false;
+
+	if (s && !strcmp(s, "nonsec"))
+		nonsec = true;
+
+	return nonsec;
+}
+#endif
+
+#ifdef CONFIG_ARM64
+__weak void update_os_arch_secondary_cores(uint8_t os_arch)
+{
+}
+
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+static void switch_to_el1(void)
+{
+	if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
+	    (images.os.arch == IH_ARCH_ARM))
+		armv8_switch_to_el1(0, (u64)gd->bd->bi_arch_number,
+				    (u64)images.ft_addr, 0,
+				    (u64)images.ep,
+				    ES_TO_AARCH32);
+	else
+		armv8_switch_to_el1((u64)images.ft_addr, 0, 0, 0,
+				    images.ep,
+				    ES_TO_AARCH64);
+}
+#endif
+#endif
+
+/* Subcommand: GO */
+static void boot_jump_linux(bootm_headers_t *images, int flag)
+{
+#ifdef CONFIG_ARM64
+	void (*kernel_entry)(void *fdt_addr, void *res0, void *res1,
+			void *res2);
+	int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
+
+	kernel_entry = (void (*)(void *fdt_addr, void *res0, void *res1,
+				void *res2))images->ep;
+
+	debug("## Transferring control to Linux (at address %lx)...\n",
+		(ulong) kernel_entry);
+	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+
+	announce_and_cleanup(fake);
+
+	if (!fake) {
+#ifdef CONFIG_ARMV8_PSCI
+		armv8_setup_psci();
+#endif
+		do_nonsec_virt_switch();
+
+		update_os_arch_secondary_cores(images->os.arch);
+
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+		armv8_switch_to_el2((u64)images->ft_addr, 0, 0, 0,
+				    (u64)switch_to_el1, ES_TO_AARCH64);
+#else
+		if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
+		    (images->os.arch == IH_ARCH_ARM))
+			armv8_switch_to_el2(0, (u64)gd->bd->bi_arch_number,
+					    (u64)images->ft_addr, 0,
+					    (u64)images->ep,
+					    ES_TO_AARCH32);
+		else
+			armv8_switch_to_el2((u64)images->ft_addr, 0, 0, 0,
+					    images->ep,
+					    ES_TO_AARCH64);
+#endif
+	}
+#else
+	unsigned long machid = gd->bd->bi_arch_number;
+	char *s;
+	void (*kernel_entry)(int zero, int arch, uint params);
+	unsigned long r2;
+	int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
+
+	kernel_entry = (void (*)(int, int, uint))images->ep;
+#ifdef CONFIG_CPU_V7M
+	ulong addr = (ulong)kernel_entry | 1;
+	kernel_entry = (void *)addr;
+#endif
+	s = env_get("machid");
+	if (s) {
+		if (strict_strtoul(s, 16, &machid) < 0) {
+			debug("strict_strtoul failed!\n");
+			return;
+		}
+		printf("Using machid 0x%lx from environment\n", machid);
+	}
+
+	debug("## Transferring control to Linux (at address %08lx)" \
+		"...\n", (ulong) kernel_entry);
+	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+	announce_and_cleanup(fake);
+
+	if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len)
+		r2 = (unsigned long)images->ft_addr;
+	else
+		r2 = gd->bd->bi_boot_params;
+
+	if (!fake) {
+#ifdef CONFIG_ARMV7_NONSEC
+		if (armv7_boot_nonsec()) {
+			armv7_init_nonsec();
+			secure_ram_addr(_do_nonsec_entry)(kernel_entry,
+							  0, machid, r2);
+		} else
+#endif
+			kernel_entry(0, machid, r2);
+	}
+#endif
+}
+
+/* Main Entry point for arm bootm implementation
+ *
+ * Modeled after the powerpc implementation
+ * DIFFERENCE: Instead of calling prep and go at the end
+ * they are called if subcommand is equal 0.
+ */
+int do_bootm_linux(int flag, int argc, char *const argv[],
+		   bootm_headers_t *images)
+{
+	/* No need for those on ARM */
+	if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE)
+		return -1;
+
+	if (flag & BOOTM_STATE_OS_PREP) {
+		boot_prep_linux(images);
+		return 0;
+	}
+
+	if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) {
+		boot_jump_linux(images, flag);
+		return 0;
+	}
+
+	boot_prep_linux(images);
+	boot_jump_linux(images, flag);
+	return 0;
+}
+
+#if defined(CONFIG_BOOTM_VXWORKS)
+void boot_prep_vxworks(bootm_headers_t *images)
+{
+#if defined(CONFIG_OF_LIBFDT)
+	int off;
+
+	if (images->ft_addr) {
+		off = fdt_path_offset(images->ft_addr, "/memory");
+		if (off > 0) {
+			if (arch_fixup_fdt(images->ft_addr))
+				puts("## WARNING: fixup memory failed!\n");
+		}
+	}
+#endif
+	cleanup_before_linux();
+}
+void boot_jump_vxworks(bootm_headers_t *images)
+{
+#if defined(CONFIG_ARM64) && defined(CONFIG_ARMV8_PSCI)
+	armv8_setup_psci();
+	smp_kick_all_cpus();
+#endif
+
+	/* ARM VxWorks requires device tree physical address to be passed */
+	((void (*)(void *))images->ep)(images->ft_addr);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/lib/cache-cp15.c b/roms/u-boot/arch/arm/lib/cache-cp15.c
new file mode 100644
index 000000000..aab1bf436
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/cache-cp15.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <linux/compiler.h>
+#include <asm/armv7_mpu.h>
+
+#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SYS_ARM_MMU
+__weak void arm_init_before_mmu(void)
+{
+}
+
+static void set_section_phys(int section, phys_addr_t phys,
+			     enum dcache_option option)
+{
+#ifdef CONFIG_ARMV7_LPAE
+	u64 *page_table = (u64 *)gd->arch.tlb_addr;
+	/* Need to set the access flag to not fault */
+	u64 value = TTB_SECT_AP | TTB_SECT_AF;
+#else
+	u32 *page_table = (u32 *)gd->arch.tlb_addr;
+	u32 value = TTB_SECT_AP;
+#endif
+
+	/* Add the page offset */
+	value |= phys;
+
+	/* Add caching bits */
+	value |= option;
+
+	/* Set PTE */
+	page_table[section] = value;
+}
+
+void set_section_dcache(int section, enum dcache_option option)
+{
+	set_section_phys(section, (u32)section << MMU_SECTION_SHIFT, option);
+}
+
+__weak void mmu_page_table_flush(unsigned long start, unsigned long stop)
+{
+	debug("%s: Warning: not implemented\n", __func__);
+}
+
+void mmu_set_region_dcache_behaviour_phys(phys_addr_t start, phys_addr_t phys,
+					size_t size, enum dcache_option option)
+{
+#ifdef CONFIG_ARMV7_LPAE
+	u64 *page_table = (u64 *)gd->arch.tlb_addr;
+#else
+	u32 *page_table = (u32 *)gd->arch.tlb_addr;
+#endif
+	unsigned long startpt, stoppt;
+	unsigned long upto, end;
+
+	/* div by 2 before start + size to avoid phys_addr_t overflow */
+	end = ALIGN((start / 2) + (size / 2), MMU_SECTION_SIZE / 2)
+	      >> (MMU_SECTION_SHIFT - 1);
+	start = start >> MMU_SECTION_SHIFT;
+
+#ifdef CONFIG_ARMV7_LPAE
+	debug("%s: start=%pa, size=%zu, option=%llx\n", __func__, &start, size,
+	      option);
+#else
+	debug("%s: start=%pa, size=%zu, option=0x%x\n", __func__, &start, size,
+	      option);
+#endif
+	for (upto = start; upto < end; upto++, phys += MMU_SECTION_SIZE)
+		set_section_phys(upto, phys, option);
+
+	/*
+	 * Make sure range is cache line aligned
+	 * Only CPU maintains page tables, hence it is safe to always
+	 * flush complete cache lines...
+	 */
+
+	startpt = (unsigned long)&page_table[start];
+	startpt &= ~(CONFIG_SYS_CACHELINE_SIZE - 1);
+	stoppt = (unsigned long)&page_table[end];
+	stoppt = ALIGN(stoppt, CONFIG_SYS_CACHELINE_SIZE);
+	mmu_page_table_flush(startpt, stoppt);
+}
+
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
+				     enum dcache_option option)
+{
+	mmu_set_region_dcache_behaviour_phys(start, start, size, option);
+}
+
+__weak void dram_bank_mmu_setup(int bank)
+{
+	struct bd_info *bd = gd->bd;
+	int	i;
+
+	/* bd->bi_dram is available only after relocation */
+	if ((gd->flags & GD_FLG_RELOC) == 0)
+		return;
+
+	debug("%s: bank: %d\n", __func__, bank);
+	for (i = bd->bi_dram[bank].start >> MMU_SECTION_SHIFT;
+	     i < (bd->bi_dram[bank].start >> MMU_SECTION_SHIFT) +
+		 (bd->bi_dram[bank].size >> MMU_SECTION_SHIFT);
+	     i++)
+		set_section_dcache(i, DCACHE_DEFAULT_OPTION);
+}
+
+/* to activate the MMU we need to set up virtual memory: use 1M areas */
+static inline void mmu_setup(void)
+{
+	int i;
+	u32 reg;
+
+	arm_init_before_mmu();
+	/* Set up an identity-mapping for all 4GB, rw for everyone */
+	for (i = 0; i < ((4096ULL * 1024 * 1024) >> MMU_SECTION_SHIFT); i++)
+		set_section_dcache(i, DCACHE_OFF);
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		dram_bank_mmu_setup(i);
+	}
+
+#if defined(CONFIG_ARMV7_LPAE) && __LINUX_ARM_ARCH__ != 4
+	/* Set up 4 PTE entries pointing to our 4 1GB page tables */
+	for (i = 0; i < 4; i++) {
+		u64 *page_table = (u64 *)(gd->arch.tlb_addr + (4096 * 4));
+		u64 tpt = gd->arch.tlb_addr + (4096 * i);
+		page_table[i] = tpt | TTB_PAGETABLE;
+	}
+
+	reg = TTBCR_EAE;
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+	reg |= TTBCR_ORGN0_WT | TTBCR_IRGN0_WT;
+#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
+	reg |= TTBCR_ORGN0_WBWA | TTBCR_IRGN0_WBWA;
+#else
+	reg |= TTBCR_ORGN0_WBNWA | TTBCR_IRGN0_WBNWA;
+#endif
+
+	if (is_hyp()) {
+		/* Set HTCR to enable LPAE */
+		asm volatile("mcr p15, 4, %0, c2, c0, 2"
+			: : "r" (reg) : "memory");
+		/* Set HTTBR0 */
+		asm volatile("mcrr p15, 4, %0, %1, c2"
+			:
+			: "r"(gd->arch.tlb_addr + (4096 * 4)), "r"(0)
+			: "memory");
+		/* Set HMAIR */
+		asm volatile("mcr p15, 4, %0, c10, c2, 0"
+			: : "r" (MEMORY_ATTRIBUTES) : "memory");
+	} else {
+		/* Set TTBCR to enable LPAE */
+		asm volatile("mcr p15, 0, %0, c2, c0, 2"
+			: : "r" (reg) : "memory");
+		/* Set 64-bit TTBR0 */
+		asm volatile("mcrr p15, 0, %0, %1, c2"
+			:
+			: "r"(gd->arch.tlb_addr + (4096 * 4)), "r"(0)
+			: "memory");
+		/* Set MAIR */
+		asm volatile("mcr p15, 0, %0, c10, c2, 0"
+			: : "r" (MEMORY_ATTRIBUTES) : "memory");
+	}
+#elif defined(CONFIG_CPU_V7A)
+	if (is_hyp()) {
+		/* Set HTCR to disable LPAE */
+		asm volatile("mcr p15, 4, %0, c2, c0, 2"
+			: : "r" (0) : "memory");
+	} else {
+		/* Set TTBCR to disable LPAE */
+		asm volatile("mcr p15, 0, %0, c2, c0, 2"
+			: : "r" (0) : "memory");
+	}
+	/* Set TTBR0 */
+	reg = gd->arch.tlb_addr & TTBR0_BASE_ADDR_MASK;
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+	reg |= TTBR0_RGN_WT | TTBR0_IRGN_WT;
+#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
+	reg |= TTBR0_RGN_WBWA | TTBR0_IRGN_WBWA;
+#else
+	reg |= TTBR0_RGN_WB | TTBR0_IRGN_WB;
+#endif
+	asm volatile("mcr p15, 0, %0, c2, c0, 0"
+		     : : "r" (reg) : "memory");
+#else
+	/* Copy the page table address to cp15 */
+	asm volatile("mcr p15, 0, %0, c2, c0, 0"
+		     : : "r" (gd->arch.tlb_addr) : "memory");
+#endif
+	/*
+	 * initial value of Domain Access Control Register (DACR)
+	 * Set the access control to client (1U) for each of the 16 domains
+	 */
+	asm volatile("mcr p15, 0, %0, c3, c0, 0"
+		     : : "r" (0x55555555));
+
+	/* and enable the mmu */
+	reg = get_cr();	/* get control reg. */
+	set_cr(reg | CR_M);
+}
+
+static int mmu_enabled(void)
+{
+	return get_cr() & CR_M;
+}
+#endif /* CONFIG_SYS_ARM_MMU */
+
+/* cache_bit must be either CR_I or CR_C */
+static void cache_enable(uint32_t cache_bit)
+{
+	uint32_t reg;
+
+	/* The data cache is not active unless the mmu/mpu is enabled too */
+#ifdef CONFIG_SYS_ARM_MMU
+	if ((cache_bit == CR_C) && !mmu_enabled())
+		mmu_setup();
+#elif defined(CONFIG_SYS_ARM_MPU)
+	if ((cache_bit == CR_C) && !mpu_enabled()) {
+		printf("Consider enabling MPU before enabling caches\n");
+		return;
+	}
+#endif
+	reg = get_cr();	/* get control reg. */
+	set_cr(reg | cache_bit);
+}
+
+/* cache_bit must be either CR_I or CR_C */
+static void cache_disable(uint32_t cache_bit)
+{
+	uint32_t reg;
+
+	reg = get_cr();
+
+	if (cache_bit == CR_C) {
+		/* if cache isn;t enabled no need to disable */
+		if ((reg & CR_C) != CR_C)
+			return;
+#ifdef CONFIG_SYS_ARM_MMU
+		/* if disabling data cache, disable mmu too */
+		cache_bit |= CR_M;
+#endif
+	}
+	reg = get_cr();
+
+#ifdef CONFIG_SYS_ARM_MMU
+	if (cache_bit == (CR_C | CR_M))
+#elif defined(CONFIG_SYS_ARM_MPU)
+	if (cache_bit == CR_C)
+#endif
+		flush_dcache_all();
+	set_cr(reg & ~cache_bit);
+}
+#endif
+
+#if CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+void icache_enable(void)
+{
+	return;
+}
+
+void icache_disable(void)
+{
+	return;
+}
+
+int icache_status(void)
+{
+	return 0;					/* always off */
+}
+#else
+void icache_enable(void)
+{
+	cache_enable(CR_I);
+}
+
+void icache_disable(void)
+{
+	cache_disable(CR_I);
+}
+
+int icache_status(void)
+{
+	return (get_cr() & CR_I) != 0;
+}
+#endif
+
+#if CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void dcache_enable(void)
+{
+	return;
+}
+
+void dcache_disable(void)
+{
+	return;
+}
+
+int dcache_status(void)
+{
+	return 0;					/* always off */
+}
+#else
+void dcache_enable(void)
+{
+	cache_enable(CR_C);
+}
+
+void dcache_disable(void)
+{
+	cache_disable(CR_C);
+}
+
+int dcache_status(void)
+{
+	return (get_cr() & CR_C) != 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/lib/cache-pl310.c b/roms/u-boot/arch/arm/lib/cache-pl310.c
new file mode 100644
index 000000000..bbaaaa415
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/cache-pl310.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ */
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/armv7.h>
+#include <asm/pl310.h>
+#include <config.h>
+#include <common.h>
+
+struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+
+static void pl310_cache_sync(void)
+{
+	writel(0, &pl310->pl310_cache_sync);
+}
+
+static void pl310_background_op_all_ways(u32 *op_reg)
+{
+	u32 assoc_16, associativity, way_mask;
+
+	assoc_16 = readl(&pl310->pl310_aux_ctrl) &
+			PL310_AUX_CTRL_ASSOCIATIVITY_MASK;
+	if (assoc_16)
+		associativity = 16;
+	else
+		associativity = 8;
+
+	way_mask = (1 << associativity) - 1;
+	/* Invalidate all ways */
+	writel(way_mask, op_reg);
+	/* Wait for all ways to be invalidated */
+	while (readl(op_reg) & way_mask)
+		;
+	pl310_cache_sync();
+}
+
+void v7_outer_cache_inval_all(void)
+{
+	pl310_background_op_all_ways(&pl310->pl310_inv_way);
+}
+
+void v7_outer_cache_flush_all(void)
+{
+	pl310_background_op_all_ways(&pl310->pl310_clean_inv_way);
+}
+
+/* Flush(clean invalidate) memory from start to stop-1 */
+void v7_outer_cache_flush_range(u32 start, u32 stop)
+{
+	/* PL310 currently supports only 32 bytes cache line */
+	u32 pa, line_size = 32;
+
+	/*
+	 * Align to the beginning of cache-line - this ensures that
+	 * the first 5 bits are 0 as required by PL310 TRM
+	 */
+	start &= ~(line_size - 1);
+
+	for (pa = start; pa < stop; pa = pa + line_size)
+		writel(pa, &pl310->pl310_clean_inv_line_pa);
+
+	pl310_cache_sync();
+}
+
+/* invalidate memory from start to stop-1 */
+void v7_outer_cache_inval_range(u32 start, u32 stop)
+{
+	/* PL310 currently supports only 32 bytes cache line */
+	u32 pa, line_size = 32;
+
+	/*
+	 * If start address is not aligned to cache-line do not
+	 * invalidate the first cache-line
+	 */
+	if (start & (line_size - 1)) {
+		printf("ERROR: %s - start address is not aligned - 0x%08x\n",
+			__func__, start);
+		/* move to next cache line */
+		start = (start + line_size - 1) & ~(line_size - 1);
+	}
+
+	/*
+	 * If stop address is not aligned to cache-line do not
+	 * invalidate the last cache-line
+	 */
+	if (stop & (line_size - 1)) {
+		printf("ERROR: %s - stop address is not aligned - 0x%08x\n",
+			__func__, stop);
+		/* align to the beginning of this cache line */
+		stop &= ~(line_size - 1);
+	}
+
+	for (pa = start; pa < stop; pa = pa + line_size)
+		writel(pa, &pl310->pl310_inv_line_pa);
+
+	pl310_cache_sync();
+}
diff --git a/roms/u-boot/arch/arm/lib/cache.c b/roms/u-boot/arch/arm/lib/cache.c
new file mode 100644
index 000000000..a2bf2e57b
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/cache.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+/* for now: just dummy functions to satisfy the linker */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <malloc.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Flush range from all levels of d-cache/unified-cache.
+ * Affects the range [start, start + size - 1].
+ */
+__weak void flush_cache(unsigned long start, unsigned long size)
+{
+	flush_dcache_range(start, start + size);
+}
+
+/*
+ * Default implementation:
+ * do a range flush for the entire range
+ */
+__weak void flush_dcache_all(void)
+{
+	flush_cache(0, ~0);
+}
+
+/*
+ * Default implementation of enable_caches()
+ * Real implementation should be in platform code
+ */
+__weak void enable_caches(void)
+{
+	puts("WARNING: Caches not enabled\n");
+}
+
+__weak void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+	/* An empty stub, real implementation should be in platform code */
+}
+__weak void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	/* An empty stub, real implementation should be in platform code */
+}
+
+int check_cache_range(unsigned long start, unsigned long stop)
+{
+	int ok = 1;
+
+	if (start & (CONFIG_SYS_CACHELINE_SIZE - 1))
+		ok = 0;
+
+	if (stop & (CONFIG_SYS_CACHELINE_SIZE - 1))
+		ok = 0;
+
+	if (!ok) {
+		warn_non_spl("CACHE: Misaligned operation at range [%08lx, %08lx]\n",
+			     start, stop);
+	}
+
+	return ok;
+}
+
+#ifdef CONFIG_SYS_NONCACHED_MEMORY
+/*
+ * Reserve one MMU section worth of address space below the malloc() area that
+ * will be mapped uncached.
+ */
+static unsigned long noncached_start;
+static unsigned long noncached_end;
+static unsigned long noncached_next;
+
+void noncached_set_region(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	mmu_set_region_dcache_behaviour(noncached_start,
+					noncached_end - noncached_start,
+					DCACHE_OFF);
+#endif
+}
+
+int noncached_init(void)
+{
+	phys_addr_t start, end;
+	size_t size;
+
+	/* If this calculation changes, update board_f.c:reserve_noncached() */
+	end = ALIGN(mem_malloc_start, MMU_SECTION_SIZE) - MMU_SECTION_SIZE;
+	size = ALIGN(CONFIG_SYS_NONCACHED_MEMORY, MMU_SECTION_SIZE);
+	start = end - size;
+
+	debug("mapping memory %pa-%pa non-cached\n", &start, &end);
+
+	noncached_start = start;
+	noncached_end = end;
+	noncached_next = start;
+
+	noncached_set_region();
+
+	return 0;
+}
+
+phys_addr_t noncached_alloc(size_t size, size_t align)
+{
+	phys_addr_t next = ALIGN(noncached_next, align);
+
+	if (next >= noncached_end || (noncached_end - next) < size)
+		return 0;
+
+	debug("allocated %zu bytes of uncached memory @%pa\n", size, &next);
+	noncached_next = next + size;
+
+	return next;
+}
+#endif /* CONFIG_SYS_NONCACHED_MEMORY */
+
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+void invalidate_l2_cache(void)
+{
+	unsigned int val = 0;
+
+	asm volatile("mcr p15, 1, %0, c15, c11, 0 @ invl l2 cache"
+		: : "r" (val) : "cc");
+	isb();
+}
+#endif
+
+int arch_reserve_mmu(void)
+{
+	return arm_reserve_mmu();
+}
+
+__weak int arm_reserve_mmu(void)
+{
+#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+	/* reserve TLB table */
+	gd->arch.tlb_size = PGTABLE_SIZE;
+	gd->relocaddr -= gd->arch.tlb_size;
+
+	/* round down to next 64 kB limit */
+	gd->relocaddr &= ~(0x10000 - 1);
+
+	gd->arch.tlb_addr = gd->relocaddr;
+	debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr,
+	      gd->arch.tlb_addr + gd->arch.tlb_size);
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	/*
+	 * Record allocated tlb_addr in case gd->tlb_addr to be overwritten
+	 * with location within secure ram.
+	 */
+	gd->arch.tlb_allocated = gd->arch.tlb_addr;
+#endif
+#endif
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/lib/ccn504.S b/roms/u-boot/arch/arm/lib/ccn504.S
new file mode 100644
index 000000000..2c584095c
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/ccn504.S
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015 Freescale Semiconductor
+ *
+ * Extracted from gic_64.S
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+/*************************************************************************
+ *
+ * void ccn504_add_masters_to_dvm(CCI_MN_BASE, CCI_MN_RNF_NODEID_LIST,
+ * 				  CCI_MN_DVM_DOMAIN_CTL_SET);
+ *
+ * Add fully-coherent masters to DVM domain
+ *
+ *************************************************************************/
+ENTRY(ccn504_add_masters_to_dvm)
+	/*
+	 * x0: CCI_MN_BASE
+	 * x1: CCI_MN_RNF_NODEID_LIST
+	 * x2: CCI_MN_DVM_DOMAIN_CTL_SET
+	 */
+
+	/* Add fully-coherent masters to DVM domain */
+	ldr	x9, [x0, x1]
+	str	x9, [x0, x2]
+1:	ldr	x10, [x0, x2]
+	mvn	x11, x10
+	tst	x11, x10 /* Wait for domain addition to complete */
+	b.ne	1b
+
+	ret
+ENDPROC(ccn504_add_masters_to_dvm)
+
+/*************************************************************************
+ *
+ * void ccn504_set_qos(CCI_Sx_QOS_CONTROL_BASE, QoS Value);
+ *
+ * Initialize QoS settings for AR/AW override.
+ * Right now, this function sets the same QoS value for all RN-I ports
+ *
+ *************************************************************************/
+ENTRY(ccn504_set_qos)
+	/*
+	 * x0: CCI_Sx_QOS_CONTROL_BASE
+	 * x1: QoS Value
+	 */
+
+	/* Set all RN-I ports to QoS value denoted by x1 */
+	ldr	x9, [x0]
+	mov	x10, x1
+	orr	x9, x9, x10
+	str	x9, [x0]
+
+	ret
+ENDPROC(ccn504_set_qos)
+
+/*************************************************************************
+ *
+ * void ccn504_set_aux(CCI_AUX_CONTROL_BASE, Value);
+ *
+ * Initialize AUX control settings
+ *
+ *************************************************************************/
+ENTRY(ccn504_set_aux)
+	/*
+	 * x0: CCI_AUX_CONTROL_BASE
+	 * x1: Value
+	 */
+
+	ldr	x9, [x0]
+	mov	x10, x1
+	orr	x9, x9, x10
+	str	x9, [x0]
+
+	ret
+ENDPROC(ccn504_set_aux)
+
diff --git a/roms/u-boot/arch/arm/lib/cmd_boot.c b/roms/u-boot/arch/arm/lib/cmd_boot.c
new file mode 100644
index 000000000..c905ecc4b
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/cmd_boot.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Copyright 2015 ATS Advanced Telematics Systems GmbH
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ */
+
+#include <common.h>
+#include <command.h>
+
+/*
+ * ARMv7M does not support ARM instruction mode. However, the
+ * interworking BLX and BX instructions do encode the ARM/Thumb
+ * field in bit 0. This means that when executing any Branch
+ * and eXchange instruction we must set bit 0 to one to guarantee
+ * that we keep the processor in Thumb instruction mode. From The
+ * ARMv7-M Instruction Set A4.1.1:
+ *   "ARMv7-M only supports the Thumb instruction execution state,
+ *    therefore the value of address bit [0] must be 1 in interworking
+ *    instructions, otherwise a fault occurs."
+ */
+unsigned long do_go_exec(ulong (*entry)(int, char * const []),
+			 int argc, char *const argv[])
+{
+	ulong addr = (ulong)entry | 1;
+	entry = (void *)addr;
+
+	return entry(argc, argv);
+}
diff --git a/roms/u-boot/arch/arm/lib/crt0.S b/roms/u-boot/arch/arm/lib/crt0.S
new file mode 100644
index 000000000..46b6be21a
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/crt0.S
@@ -0,0 +1,182 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  crt0 - C-runtime startup Code for ARM U-Boot
+ *
+ *  Copyright (c) 2012  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#include <config.h>
+#include <asm-offsets.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * This file handles the target-independent stages of the U-Boot
+ * start-up where a C runtime environment is needed. Its entry point
+ * is _main and is branched into from the target's start.S file.
+ *
+ * _main execution sequence is:
+ *
+ * 1. Set up initial environment for calling board_init_f().
+ *    This environment only provides a stack and a place to store
+ *    the GD ('global data') structure, both located in some readily
+ *    available RAM (SRAM, locked cache...). In this context, VARIABLE
+ *    global data, initialized or not (BSS), are UNAVAILABLE; only
+ *    CONSTANT initialized data are available. GD should be zeroed
+ *    before board_init_f() is called.
+ *
+ * 2. Call board_init_f(). This function prepares the hardware for
+ *    execution from system RAM (DRAM, DDR...) As system RAM may not
+ *    be available yet, , board_init_f() must use the current GD to
+ *    store any data which must be passed on to later stages. These
+ *    data include the relocation destination, the future stack, and
+ *    the future GD location.
+ *
+ * 3. Set up intermediate environment where the stack and GD are the
+ *    ones allocated by board_init_f() in system RAM, but BSS and
+ *    initialized non-const data are still not available.
+ *
+ * 4a.For U-Boot proper (not SPL), call relocate_code(). This function
+ *    relocates U-Boot from its current location into the relocation
+ *    destination computed by board_init_f().
+ *
+ * 4b.For SPL, board_init_f() just returns (to crt0). There is no
+ *    code relocation in SPL.
+ *
+ * 5. Set up final environment for calling board_init_r(). This
+ *    environment has BSS (initialized to 0), initialized non-const
+ *    data (initialized to their intended value), and stack in system
+ *    RAM (for SPL moving the stack and GD into RAM is optional - see
+ *    CONFIG_SPL_STACK_R). GD has retained values set by board_init_f().
+ *
+ * 6. For U-Boot proper (not SPL), some CPUs have some work left to do
+ *    at this point regarding memory, so call c_runtime_cpu_setup.
+ *
+ * 7. Branch to board_init_r().
+ *
+ * For more information see 'Board Initialisation Flow in README.
+ */
+
+/*
+ * Macro for clearing BSS during SPL execution. Usually called during the
+ * relocation process for most boards before entering board_init_r(), but
+ * can also be done early before entering board_init_f() on plaforms that
+ * can afford it due to sufficient memory being available early.
+ */
+
+.macro CLEAR_BSS
+	ldr	r0, =__bss_start	/* this is auto-relocated! */
+
+#ifdef CONFIG_USE_ARCH_MEMSET
+	ldr	r3, =__bss_end		/* this is auto-relocated! */
+	mov	r1, #0x00000000		/* prepare zero to clear BSS */
+
+	subs	r2, r3, r0		/* r2 = memset len */
+	bl	memset
+#else
+	ldr	r1, =__bss_end		/* this is auto-relocated! */
+	mov	r2, #0x00000000		/* prepare zero to clear BSS */
+
+clbss_l:cmp	r0, r1			/* while not at end of BSS */
+	strlo	r2, [r0]		/* clear 32-bit BSS word */
+	addlo	r0, r0, #4		/* move to next */
+	blo	clbss_l
+#endif
+.endm
+
+/*
+ * entry point of crt0 sequence
+ */
+
+ENTRY(_main)
+
+/*
+ * Set up initial C runtime environment and call board_init_f(0).
+ */
+
+#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK)
+	ldr	r0, =(CONFIG_TPL_STACK)
+#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+	ldr	r0, =(CONFIG_SPL_STACK)
+#else
+	ldr	r0, =(CONFIG_SYS_INIT_SP_ADDR)
+#endif
+	bic	r0, r0, #7	/* 8-byte alignment for ABI compliance */
+	mov	sp, r0
+	bl	board_init_f_alloc_reserve
+	mov	sp, r0
+	/* set up gd here, outside any C code */
+	mov	r9, r0
+	bl	board_init_f_init_reserve
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_EARLY_BSS)
+	CLEAR_BSS
+#endif
+
+	mov	r0, #0
+	bl	board_init_f
+
+#if ! defined(CONFIG_SPL_BUILD)
+
+/*
+ * Set up intermediate environment (new sp and gd) and call
+ * relocate_code(addr_moni). Trick here is that we'll return
+ * 'here' but relocated.
+ */
+
+	ldr	r0, [r9, #GD_START_ADDR_SP]	/* sp = gd->start_addr_sp */
+	bic	r0, r0, #7	/* 8-byte alignment for ABI compliance */
+	mov	sp, r0
+	ldr	r9, [r9, #GD_NEW_GD]		/* r9 <- gd->new_gd */
+
+	adr	lr, here
+	ldr	r0, [r9, #GD_RELOC_OFF]		/* r0 = gd->reloc_off */
+	add	lr, lr, r0
+#if defined(CONFIG_CPU_V7M)
+	orr	lr, #1				/* As required by Thumb-only */
+#endif
+	ldr	r0, [r9, #GD_RELOCADDR]		/* r0 = gd->relocaddr */
+	b	relocate_code
+here:
+/*
+ * now relocate vectors
+ */
+
+	bl	relocate_vectors
+
+/* Set up final (full) environment */
+
+	bl	c_runtime_cpu_setup	/* we still call old routine here */
+#endif
+#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)
+
+#if !defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_EARLY_BSS)
+	CLEAR_BSS
+#endif
+
+# ifdef CONFIG_SPL_BUILD
+	/* Use a DRAM stack for the rest of SPL, if requested */
+	bl	spl_relocate_stack_gd
+	cmp	r0, #0
+	movne	sp, r0
+	movne	r9, r0
+# endif
+
+#if ! defined(CONFIG_SPL_BUILD)
+	bl coloured_LED_init
+	bl red_led_on
+#endif
+	/* call board_init_r(gd_t *id, ulong dest_addr) */
+	mov     r0, r9                  /* gd_t */
+	ldr	r1, [r9, #GD_RELOCADDR]	/* dest_addr */
+	/* call board_init_r */
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+	ldr	lr, =board_init_r	/* this is auto-relocated! */
+	bx	lr
+#else
+	ldr	pc, =board_init_r	/* this is auto-relocated! */
+#endif
+	/* we should not return here. */
+#endif
+
+ENDPROC(_main)
diff --git a/roms/u-boot/arch/arm/lib/crt0_64.S b/roms/u-boot/arch/arm/lib/crt0_64.S
new file mode 100644
index 000000000..680e674fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/crt0_64.S
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * crt0 - C-runtime startup Code for AArch64 U-Boot
+ *
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2012
+ * Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#include <config.h>
+#include <asm-offsets.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * This file handles the target-independent stages of the U-Boot
+ * start-up where a C runtime environment is needed. Its entry point
+ * is _main and is branched into from the target's start.S file.
+ *
+ * _main execution sequence is:
+ *
+ * 1. Set up initial environment for calling board_init_f().
+ *    This environment only provides a stack and a place to store
+ *    the GD ('global data') structure, both located in some readily
+ *    available RAM (SRAM, locked cache...). In this context, VARIABLE
+ *    global data, initialized or not (BSS), are UNAVAILABLE; only
+ *    CONSTANT initialized data are available. GD should be zeroed
+ *    before board_init_f() is called.
+ *
+ * 2. Call board_init_f(). This function prepares the hardware for
+ *    execution from system RAM (DRAM, DDR...) As system RAM may not
+ *    be available yet, , board_init_f() must use the current GD to
+ *    store any data which must be passed on to later stages. These
+ *    data include the relocation destination, the future stack, and
+ *    the future GD location.
+ *
+ * 3. Set up intermediate environment where the stack and GD are the
+ *    ones allocated by board_init_f() in system RAM, but BSS and
+ *    initialized non-const data are still not available.
+ *
+ * 4a.For U-Boot proper (not SPL), call relocate_code(). This function
+ *    relocates U-Boot from its current location into the relocation
+ *    destination computed by board_init_f().
+ *
+ * 4b.For SPL, board_init_f() just returns (to crt0). There is no
+ *    code relocation in SPL.
+ *
+ * 5. Set up final environment for calling board_init_r(). This
+ *    environment has BSS (initialized to 0), initialized non-const
+ *    data (initialized to their intended value), and stack in system
+ *    RAM (for SPL moving the stack and GD into RAM is optional - see
+ *    CONFIG_SPL_STACK_R). GD has retained values set by board_init_f().
+ *
+ * TODO: For SPL, implement stack relocation on AArch64.
+ *
+ * 6. For U-Boot proper (not SPL), some CPUs have some work left to do
+ *    at this point regarding memory, so call c_runtime_cpu_setup.
+ *
+ * 7. Branch to board_init_r().
+ *
+ * For more information see 'Board Initialisation Flow in README.
+ */
+
+ENTRY(_main)
+
+/*
+ * Set up initial C runtime environment and call board_init_f(0).
+ */
+#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK)
+	ldr	x0, =(CONFIG_TPL_STACK)
+#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+	ldr	x0, =(CONFIG_SPL_STACK)
+#elif defined(CONFIG_INIT_SP_RELATIVE)
+#if CONFIG_POSITION_INDEPENDENT
+	adrp	x0, __bss_start     /* x0 <- Runtime &__bss_start */
+	add	x0, x0, #:lo12:__bss_start
+#else
+	adr	x0, __bss_start
+#endif
+	add	x0, x0, #CONFIG_SYS_INIT_SP_BSS_OFFSET
+#else
+	ldr	x0, =(CONFIG_SYS_INIT_SP_ADDR)
+#endif
+	bic	sp, x0, #0xf	/* 16-byte alignment for ABI compliance */
+	mov	x0, sp
+	bl	board_init_f_alloc_reserve
+	mov	sp, x0
+	/* set up gd here, outside any C code */
+	mov	x18, x0
+	bl	board_init_f_init_reserve
+
+	mov	x0, #0
+	bl	board_init_f
+
+#if !defined(CONFIG_SPL_BUILD)
+/*
+ * Set up intermediate environment (new sp and gd) and call
+ * relocate_code(addr_moni). Trick here is that we'll return
+ * 'here' but relocated.
+ */
+	ldr	x0, [x18, #GD_START_ADDR_SP]	/* x0 <- gd->start_addr_sp */
+	bic	sp, x0, #0xf	/* 16-byte alignment for ABI compliance */
+	ldr	x18, [x18, #GD_NEW_GD]		/* x18 <- gd->new_gd */
+
+	adr	lr, relocation_return
+#if CONFIG_POSITION_INDEPENDENT
+	/* Add in link-vs-runtime offset */
+	adrp	x0, _start		/* x0 <- Runtime value of _start */
+	add	x0, x0, #:lo12:_start
+	ldr	x9, _TEXT_BASE		/* x9 <- Linked value of _start */
+	sub	x9, x9, x0		/* x9 <- Run-vs-link offset */
+	add	lr, lr, x9
+#if defined(CONFIG_SYS_RELOC_GD_ENV_ADDR)
+	ldr	x0, [x18, #GD_ENV_ADDR]	/* x0 <- gd->env_addr */
+	add	x0, x0, x9
+	str	x0, [x18, #GD_ENV_ADDR]
+#endif
+#endif
+	/* Add in link-vs-relocation offset */
+	ldr	x9, [x18, #GD_RELOC_OFF]	/* x9 <- gd->reloc_off */
+	add	lr, lr, x9	/* new return address after relocation */
+	ldr	x0, [x18, #GD_RELOCADDR]	/* x0 <- gd->relocaddr */
+	b	relocate_code
+
+relocation_return:
+
+/*
+ * Set up final (full) environment
+ */
+	bl	c_runtime_cpu_setup		/* still call old routine */
+#endif /* !CONFIG_SPL_BUILD */
+#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)
+#if defined(CONFIG_SPL_BUILD)
+	bl	spl_relocate_stack_gd           /* may return NULL */
+	/* set up gd here, outside any C code, if new stack is returned */
+	cmp	x0, #0
+	csel	x18, x0, x18, ne
+	/*
+	 * Perform 'sp = (x0 != NULL) ? x0 : sp' while working
+	 * around the constraint that conditional moves can not
+	 * have 'sp' as an operand
+	 */
+	mov	x1, sp
+	cmp	x0, #0
+	csel	x0, x0, x1, ne
+	mov	sp, x0
+#endif
+
+/*
+ * Clear BSS section
+ */
+	ldr	x0, =__bss_start		/* this is auto-relocated! */
+	ldr	x1, =__bss_end			/* this is auto-relocated! */
+clear_loop:
+	str	xzr, [x0], #8
+	cmp	x0, x1
+	b.lo	clear_loop
+
+	/* call board_init_r(gd_t *id, ulong dest_addr) */
+	mov	x0, x18				/* gd_t */
+	ldr	x1, [x18, #GD_RELOCADDR]	/* dest_addr */
+	b	board_init_r			/* PC relative jump */
+
+	/* NOTREACHED - board_init_r() does not return */
+#endif
+
+ENDPROC(_main)
diff --git a/roms/u-boot/arch/arm/lib/crt0_aarch64_efi.S b/roms/u-boot/arch/arm/lib/crt0_aarch64_efi.S
new file mode 100644
index 000000000..492195f76
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/crt0_aarch64_efi.S
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-2-Clause */
+/*
+ * crt0-efi-aarch64.S - PE/COFF header for aarch64 EFI applications
+ *
+ * Copright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ *
+ *
+ * This file is taken and modified from the gnu-efi project.
+ */
+
+#include <asm-generic/pe.h>
+
+	.section	.text.head
+
+	/*
+	 * Magic "MZ" signature for PE/COFF
+	 */
+	.globl	ImageBase
+ImageBase:
+	.short	IMAGE_DOS_SIGNATURE		/* 'MZ' */
+	.skip	54				/* 'MZ' + pad + offset == 64 */
+	.long   LINUX_ARM64_MAGIC		/* For GRUB's linux command */
+	.long	pe_header - ImageBase		/* Offset to the PE header */
+pe_header:
+	.long	IMAGE_NT_SIGNATURE		/* 'PE' */
+coff_header:
+	.short	IMAGE_FILE_MACHINE_ARM64	/* AArch64 */
+	.short	2				/* nr_sections */
+	.long	0				/* TimeDateStamp */
+	.long	0				/* PointerToSymbolTable */
+	.long	0				/* NumberOfSymbols */
+	.short	section_table - optional_header	/* SizeOfOptionalHeader */
+	/* Characteristics */
+	.short	(IMAGE_FILE_EXECUTABLE_IMAGE | \
+		 IMAGE_FILE_LINE_NUMS_STRIPPED | \
+		 IMAGE_FILE_LOCAL_SYMS_STRIPPED | \
+		 IMAGE_FILE_DEBUG_STRIPPED)
+optional_header:
+	.short	IMAGE_NT_OPTIONAL_HDR64_MAGIC	/* PE32+ format */
+	.byte	0x02				/* MajorLinkerVersion */
+	.byte	0x14				/* MinorLinkerVersion */
+	.long	_edata - _start			/* SizeOfCode */
+	.long	0				/* SizeOfInitializedData */
+	.long	0				/* SizeOfUninitializedData */
+	.long	_start - ImageBase		/* AddressOfEntryPoint */
+	.long	_start - ImageBase		/* BaseOfCode */
+
+extra_header_fields:
+	.quad	0				/* ImageBase */
+	.long	0x20				/* SectionAlignment */
+	.long	0x8				/* FileAlignment */
+	.short	0				/* MajorOperatingSystemVersion */
+	.short	0				/* MinorOperatingSystemVersion */
+	.short	0				/* MajorImageVersion */
+	.short	0				/* MinorImageVersion */
+	.short	0				/* MajorSubsystemVersion */
+	.short	0				/* MinorSubsystemVersion */
+	.long	0				/* Win32VersionValue */
+
+	.long	_edata - ImageBase		/* SizeOfImage */
+
+	/*
+	 * Everything before the kernel image is considered part of the header
+	 */
+	.long	_start - ImageBase		/* SizeOfHeaders */
+	.long	0				/* CheckSum */
+	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION /* Subsystem */
+	.short	0				/* DllCharacteristics */
+	.quad	0				/* SizeOfStackReserve */
+	.quad	0				/* SizeOfStackCommit */
+	.quad	0				/* SizeOfHeapReserve */
+	.quad	0				/* SizeOfHeapCommit */
+	.long	0				/* LoaderFlags */
+	.long	0x6				/* NumberOfRvaAndSizes */
+
+	.quad	0				/* ExportTable */
+	.quad	0				/* ImportTable */
+	.quad	0				/* ResourceTable */
+	.quad	0				/* ExceptionTable */
+	.quad	0				/* CertificationTable */
+	.quad	0				/* BaseRelocationTable */
+
+	/* Section table */
+section_table:
+
+	/*
+	 * The EFI application loader requires a relocation section
+	 * because EFI applications must be relocatable.  This is a
+	 * dummy section as far as we are concerned.
+	 */
+	.ascii	".reloc"
+	.byte	0
+	.byte	0			/* end of 0 padding of section name */
+	.long	0
+	.long	0
+	.long	0			/* SizeOfRawData */
+	.long	0			/* PointerToRawData */
+	.long	0			/* PointerToRelocations */
+	.long	0			/* PointerToLineNumbers */
+	.short	0			/* NumberOfRelocations */
+	.short	0			/* NumberOfLineNumbers */
+	.long	0x42100040		/* Characteristics (section flags) */
+
+
+	.ascii	".text"
+	.byte	0
+	.byte	0
+	.byte	0			/* end of 0 padding of section name */
+	.long	_edata - _start		/* VirtualSize */
+	.long	_start - ImageBase	/* VirtualAddress */
+	.long	_edata - _start		/* SizeOfRawData */
+	.long	_start - ImageBase	/* PointerToRawData */
+
+	.long	0		/* PointerToRelocations (0 for executables) */
+	.long	0		/* PointerToLineNumbers (0 for executables) */
+	.short	0		/* NumberOfRelocations  (0 for executables) */
+	.short	0		/* NumberOfLineNumbers  (0 for executables) */
+	.long	0xe0500020	/* Characteristics (section flags) */
+
+_start:
+	stp		x29, x30, [sp, #-32]!
+	mov		x29, sp
+
+	stp		x0, x1, [sp, #16]
+	adr		x0, ImageBase
+	adrp		x1, _DYNAMIC
+	add		x1, x1, #:lo12:_DYNAMIC
+	bl		_relocate
+	cbnz		x0, 0f
+
+	ldp		x0, x1, [sp, #16]
+	bl		efi_main
+
+0:	ldp		x29, x30, [sp], #32
+	ret
diff --git a/roms/u-boot/arch/arm/lib/crt0_arm_efi.S b/roms/u-boot/arch/arm/lib/crt0_arm_efi.S
new file mode 100644
index 000000000..cc8a115f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/crt0_arm_efi.S
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-2-Clause */
+/*
+ * crt0-efi-arm.S - PE/COFF header for ARM EFI applications
+ *
+ * Copright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * This file is taken and modified from the gnu-efi project.
+ */
+
+#include <asm-generic/pe.h>
+
+	.section	.text.head
+
+	/*
+	 * Magic "MZ" signature for PE/COFF
+	 */
+	.globl	image_base
+image_base:
+	.short	IMAGE_DOS_SIGNATURE		/* 'MZ' */
+	.skip	58				/* 'MZ' + pad + offset == 64 */
+	.long	pe_header - image_base		/* Offset to the PE header */
+pe_header:
+	.long	IMAGE_NT_SIGNATURE		/* 'PE' */
+coff_header:
+	.short	IMAGE_FILE_MACHINE_THUMB	/* Mixed ARM/Thumb */
+	.short	2				/* nr_sections */
+	.long	0				/* TimeDateStamp */
+	.long	0				/* PointerToSymbolTable */
+	.long	0				/* NumberOfSymbols */
+	.short	section_table - optional_header	/* SizeOfOptionalHeader */
+	/* Characteristics */
+	.short	(IMAGE_FILE_EXECUTABLE_IMAGE | \
+		 IMAGE_FILE_LINE_NUMS_STRIPPED | \
+		 IMAGE_FILE_LOCAL_SYMS_STRIPPED | \
+		 IMAGE_FILE_32BIT_MACHINE | \
+		 IMAGE_FILE_DEBUG_STRIPPED)
+optional_header:
+	.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	/* PE32 format */
+	.byte	0x02				/* MajorLinkerVersion */
+	.byte	0x14				/* MinorLinkerVersion */
+	.long	_edata - _start			/* SizeOfCode */
+	.long	0				/* SizeOfInitializedData */
+	.long	0				/* SizeOfUninitializedData */
+	.long	_start - image_base		/* AddressOfEntryPoint */
+	.long	_start - image_base		/* BaseOfCode */
+	.long	0				/* BaseOfData */
+
+extra_header_fields:
+	.long	0				/* image_base */
+	.long	0x20				/* SectionAlignment */
+	.long	0x8				/* FileAlignment */
+	.short	0				/* MajorOperatingSystemVersion */
+	.short	0				/* MinorOperatingSystemVersion */
+	.short	0				/* MajorImageVersion */
+	.short	0				/* MinorImageVersion */
+	.short	0				/* MajorSubsystemVersion */
+	.short	0				/* MinorSubsystemVersion */
+	.long	0				/* Win32VersionValue */
+
+	.long	_edata - image_base		/* SizeOfImage */
+
+	/*
+	 * Everything before the kernel image is considered part of the header
+	 */
+	.long	_start - image_base		/* SizeOfHeaders */
+	.long	0				/* CheckSum */
+	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION	/* Subsystem */
+	.short	0				/* DllCharacteristics */
+	.long	0				/* SizeOfStackReserve */
+	.long	0				/* SizeOfStackCommit */
+	.long	0				/* SizeOfHeapReserve */
+	.long	0				/* SizeOfHeapCommit */
+	.long	0				/* LoaderFlags */
+	.long	0x6				/* NumberOfRvaAndSizes */
+
+	.quad	0				/* ExportTable */
+	.quad	0				/* ImportTable */
+	.quad	0				/* ResourceTable */
+	.quad	0				/* ExceptionTable */
+	.quad	0				/* CertificationTable */
+	.quad	0				/* BaseRelocationTable */
+
+section_table:
+
+	/*
+	 * The EFI application loader requires a relocation section
+	 * because EFI applications must be relocatable.  This is a
+	 * dummy section as far as we are concerned.
+	 */
+	.ascii	".reloc"
+	.byte	0
+	.byte	0			/* end of 0 padding of section name */
+	.long	0
+	.long	0
+	.long	0			/* SizeOfRawData */
+	.long	0			/* PointerToRawData */
+	.long	0			/* PointerToRelocations */
+	.long	0			/* PointerToLineNumbers */
+	.short	0			/* NumberOfRelocations */
+	.short	0			/* NumberOfLineNumbers */
+	.long	0x42100040		/* Characteristics (section flags) */
+
+	.ascii	".text"
+	.byte	0
+	.byte	0
+	.byte	0			/* end of 0 padding of section name */
+	.long	_edata - _start		/* VirtualSize */
+	.long	_start - image_base	/* VirtualAddress */
+	.long	_edata - _start		/* SizeOfRawData */
+	.long	_start - image_base	/* PointerToRawData */
+
+	.long	0		/* PointerToRelocations (0 for executables) */
+	.long	0		/* PointerToLineNumbers (0 for executables) */
+	.short	0		/* NumberOfRelocations  (0 for executables) */
+	.short	0		/* NumberOfLineNumbers  (0 for executables) */
+	.long	0xe0500020	/* Characteristics (section flags) */
+
+_start:
+	stmfd		sp!, {r0-r2, lr}
+
+	adr		r1, .L_DYNAMIC
+	ldr		r0, [r1]
+	add		r1, r0, r1
+	adr		r0, image_base
+	bl		_relocate
+	teq		r0, #0
+	bne		0f
+
+	ldmfd		sp, {r0-r1}
+	bl		efi_main
+
+0:	add		sp, sp, #12
+	ldr		pc, [sp], #4
+
+.L_DYNAMIC:
+	.word		_DYNAMIC - .
diff --git a/roms/u-boot/arch/arm/lib/debug.S b/roms/u-boot/arch/arm/lib/debug.S
new file mode 100644
index 000000000..5983f2c04
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/debug.S
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  linux/arch/arm/kernel/debug.S
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *
+ *  32-bit debugging code
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+		.text
+
+/*
+ * Some debugging routines (useful if you've got MM problems and
+ * printk isn't working).  For DEBUGGING ONLY!!!  Do not leave
+ * references to these in a production kernel!
+ */
+
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
+
+#ifdef CONFIG_MMU
+		.macro	addruart_current, rx, tmp1, tmp2
+		addruart	\tmp1, \tmp2, \rx
+		mrc		p15, 0, \rx, c1, c0
+		tst		\rx, #1
+		moveq		\rx, \tmp1
+		movne		\rx, \tmp2
+		.endm
+
+#else /* !CONFIG_MMU */
+		.macro	addruart_current, rx, tmp1, tmp2
+		addruart	\rx, \tmp1, \tmp2
+		.endm
+
+#endif /* CONFIG_MMU */
+
+/*
+ * Useful debugging routines
+ */
+ENTRY(printhex8)
+		mov	r1, #8
+		b	printhex
+ENDPROC(printhex8)
+
+ENTRY(printhex4)
+		mov	r1, #4
+		b	printhex
+ENDPROC(printhex4)
+
+ENTRY(printhex2)
+		mov	r1, #2
+printhex:	adr	r2, hexbuf
+		add	r3, r2, r1
+		mov	r1, #0
+		strb	r1, [r3]
+1:		and	r1, r0, #15
+		mov	r0, r0, lsr #4
+		cmp	r1, #10
+		addlt	r1, r1, #'0'
+		addge	r1, r1, #'a' - 10
+		strb	r1, [r3, #-1]!
+		teq	r3, r2
+		bne	1b
+		mov	r0, r2
+		b	printascii
+ENDPROC(printhex2)
+
+hexbuf:		.space 16
+
+		.ltorg
+
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
+ENTRY(printascii)
+		addruart_current r3, r1, r2
+		b	2f
+1:		waituart r2, r3
+		senduart r1, r3
+		busyuart r2, r3
+		teq	r1, #'\n'
+		moveq	r1, #'\r'
+		beq	1b
+2:		teq	r0, #0
+		ldrneb	r1, [r0], #1
+		teqne	r1, #0
+		bne	1b
+		mov	pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+		addruart_current r3, r1, r2
+		mov	r1, r0
+		mov	r0, #0
+		b	1b
+ENDPROC(printch)
+
+#ifdef CONFIG_MMU
+ENTRY(debug_ll_addr)
+		addruart r2, r3, ip
+		str	r2, [r0]
+		str	r3, [r1]
+		mov	pc, lr
+ENDPROC(debug_ll_addr)
+#endif
+
+#else
+
+ENTRY(printascii)
+		mov	r1, r0
+		mov	r0, #0x04		@ SYS_WRITE0
+	ARM(	svc	#0x123456	)
+	THUMB(	svc	#0xab		)
+		mov	pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+		adr	r1, hexbuf
+		strb	r0, [r1]
+		mov	r0, #0x03		@ SYS_WRITEC
+	ARM(	svc	#0x123456	)
+	THUMB(	svc	#0xab		)
+		mov	pc, lr
+ENDPROC(printch)
+
+ENTRY(debug_ll_addr)
+		mov	r2, #0
+		str	r2, [r0]
+		str	r2, [r1]
+		mov	pc, lr
+ENDPROC(debug_ll_addr)
+
+#endif
diff --git a/roms/u-boot/arch/arm/lib/div0.c b/roms/u-boot/arch/arm/lib/div0.c
new file mode 100644
index 000000000..b91b408f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/div0.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#include <hang.h>
+
+/* Replacement (=dummy) for GNU/Linux division-by zero handler */
+void __div0 (void)
+{
+	hang();
+}
diff --git a/roms/u-boot/arch/arm/lib/div64.S b/roms/u-boot/arch/arm/lib/div64.S
new file mode 100644
index 000000000..3ef1ce1ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/div64.S
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  linux/arch/arm/lib/div64.S
+ *
+ *  Optimized computation of 64-bit dividend / 32-bit divisor
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Oct 5, 2003
+ *  Copyright:	Monta Vista Software, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#ifdef __UBOOT__
+#define UNWIND(x...)
+#endif
+
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
+#else
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
+#endif
+
+/*
+ * __do_div64: perform a division with 64-bit dividend and 32-bit divisor.
+ *
+ * Note: Calling convention is totally non standard for optimal code.
+ *       This is meant to be used by do_div() from include/asm/div64.h only.
+ *
+ * Input parameters:
+ * 	xh-xl	= dividend (clobbered)
+ * 	r4	= divisor (preserved)
+ *
+ * Output values:
+ * 	yh-yl	= result
+ * 	xh	= remainder
+ *
+ * Clobbered regs: xl, ip
+ */
+
+.pushsection .text.__do_div64, "ax"
+ENTRY(__do_div64)
+UNWIND(.fnstart)
+
+	@ Test for easy paths first.
+	subs	ip, r4, #1
+	bls	9f			@ divisor is 0 or 1
+	tst	ip, r4
+	beq	8f			@ divisor is power of 2
+
+	@ See if we need to handle upper 32-bit result.
+	cmp	xh, r4
+	mov	yh, #0
+	blo	3f
+
+	@ Align divisor with upper part of dividend.
+	@ The aligned divisor is stored in yl preserving the original.
+	@ The bit position is stored in ip.
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	yl, r4
+	clz	ip, xh
+	sub	yl, yl, ip
+	mov	ip, #1
+	mov	ip, ip, lsl yl
+	mov	yl, r4, lsl yl
+
+#else
+
+	mov	yl, r4
+	mov	ip, #1
+1:	cmp	yl, #0x80000000
+	cmpcc	yl, xh
+	movcc	yl, yl, lsl #1
+	movcc	ip, ip, lsl #1
+	bcc	1b
+
+#endif
+
+	@ The division loop for needed upper bit positions.
+ 	@ Break out early if dividend reaches 0.
+2:	cmp	xh, yl
+	orrcs	yh, yh, ip
+	subscs	xh, xh, yl
+	movsne	ip, ip, lsr #1
+	mov	yl, yl, lsr #1
+	bne	2b
+
+	@ See if we need to handle lower 32-bit result.
+3:	cmp	xh, #0
+	mov	yl, #0
+	cmpeq	xl, r4
+	movlo	xh, xl
+	retlo	lr
+
+	@ The division loop for lower bit positions.
+	@ Here we shift remainer bits leftwards rather than moving the
+	@ divisor for comparisons, considering the carry-out bit as well.
+	mov	ip, #0x80000000
+4:	movs	xl, xl, lsl #1
+	adcs	xh, xh, xh
+	beq	6f
+	cmpcc	xh, r4
+5:	orrcs	yl, yl, ip
+	subcs	xh, xh, r4
+	movs	ip, ip, lsr #1
+	bne	4b
+	ret	lr
+
+	@ The top part of remainder became zero.  If carry is set
+	@ (the 33th bit) this is a false positive so resume the loop.
+	@ Otherwise, if lower part is also null then we are done.
+6:	bcs	5b
+	cmp	xl, #0
+	reteq	lr
+
+	@ We still have remainer bits in the low part.  Bring them up.
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	xh, xl			@ we know xh is zero here so...
+	add	xh, xh, #1
+	mov	xl, xl, lsl xh
+	mov	ip, ip, lsr xh
+
+#else
+
+7:	movs	xl, xl, lsl #1
+	mov	ip, ip, lsr #1
+	bcc	7b
+
+#endif
+
+	@ Current remainder is now 1.  It is worthless to compare with
+	@ divisor at this point since divisor can not be smaller than 3 here.
+	@ If possible, branch for another shift in the division loop.
+	@ If no bit position left then we are done.
+	movs	ip, ip, lsr #1
+	mov	xh, #1
+	bne	4b
+	ret	lr
+
+8:	@ Division by a power of 2: determine what that divisor order is
+	@ then simply shift values around
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	ip, r4
+	rsb	ip, ip, #31
+
+#else
+
+	mov	yl, r4
+	cmp	r4, #(1 << 16)
+	mov	ip, #0
+	movhs	yl, yl, lsr #16
+	movhs	ip, #16
+
+	cmp	yl, #(1 << 8)
+	movhs	yl, yl, lsr #8
+	addhs	ip, ip, #8
+
+	cmp	yl, #(1 << 4)
+	movhs	yl, yl, lsr #4
+	addhs	ip, ip, #4
+
+	cmp	yl, #(1 << 2)
+	addhi	ip, ip, #3
+	addls	ip, ip, yl, lsr #1
+
+#endif
+
+	mov	yh, xh, lsr ip
+	mov	yl, xl, lsr ip
+	rsb	ip, ip, #32
+ ARM(	orr	yl, yl, xh, lsl ip	)
+ THUMB(	lsl	xh, xh, ip		)
+ THUMB(	orr	yl, yl, xh		)
+	mov	xh, xl, lsl ip
+	mov	xh, xh, lsr ip
+	ret	lr
+
+	@ eq -> division by 1: obvious enough...
+9:	moveq	yl, xl
+	moveq	yh, xh
+	moveq	xh, #0
+	reteq	lr
+UNWIND(.fnend)
+
+UNWIND(.fnstart)
+UNWIND(.pad #4)
+UNWIND(.save {lr})
+Ldiv0_64:
+	@ Division by 0:
+	str	lr, [sp, #-8]!
+	bl	__div0
+
+	@ as wrong as it could be...
+	mov	yl, #0
+	mov	yh, #0
+	mov	xh, #0
+	ldr	pc, [sp], #8
+
+UNWIND(.fnend)
+ENDPROC(__do_div64)
+.popsection
diff --git a/roms/u-boot/arch/arm/lib/eabi_compat.c b/roms/u-boot/arch/arm/lib/eabi_compat.c
new file mode 100644
index 000000000..f7029918d
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/eabi_compat.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Utility functions needed for (some) EABI conformant tool chains.
+ *
+ * (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
+ */
+
+#include <common.h>
+
+int raise (int signum)
+{
+	/* Even if printf() is available, it's large. Punt it for SPL builds */
+#if !defined(CONFIG_SPL_BUILD)
+	printf("raise: Signal # %d caught\n", signum);
+#endif
+	return 0;
+}
+
+/* Dummy function to avoid linker complaints */
+void __aeabi_unwind_cpp_pr0(void)
+{
+}
+
+void __aeabi_unwind_cpp_pr1(void)
+{
+}
+
+/* Copy memory like memcpy, but no return value required.  */
+void __aeabi_memcpy(void *dest, const void *src, size_t n)
+{
+	(void) memcpy(dest, src, n);
+}
+
+void __aeabi_memset(void *dest, size_t n, int c)
+{
+	(void) memset(dest, c, n);
+}
diff --git a/roms/u-boot/arch/arm/lib/elf_aarch64_efi.lds b/roms/u-boot/arch/arm/lib/elf_aarch64_efi.lds
new file mode 100644
index 000000000..90af469f4
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/elf_aarch64_efi.lds
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * U-Boot aarch64 EFI linker script
+ *
+ * Modified from elf_aarch64_efi.lds in gnu-efi
+ */
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+	.text 0x0 : {
+		_text = .;
+		*(.text.head)
+		*(.text)
+		*(.text.*)
+		*(.gnu.linkonce.t.*)
+		*(.srodata)
+		*(.rodata*)
+		. = ALIGN(16);
+	}
+	_etext = .;
+	_text_size = . - _text;
+	.dynamic  : { *(.dynamic) }
+	.data : {
+		_data = .;
+		*(.sdata)
+		*(.data)
+		*(.data1)
+		*(.data.*)
+		*(.got.plt)
+		*(.got)
+
+		/*
+		 * The EFI loader doesn't seem to like a .bss section, so we
+		 * stick it all into .data:
+		 */
+		. = ALIGN(16);
+		_bss = .;
+		*(.sbss)
+		*(.scommon)
+		*(.dynbss)
+		*(.bss)
+		*(.bss.*)
+		*(COMMON)
+		. = ALIGN(16);
+		_bss_end = .;
+		_edata = .;
+	}
+	.rela.dyn : { *(.rela.dyn) }
+	.rela.plt : { *(.rela.plt) }
+	.rela.got : { *(.rela.got) }
+	.rela.data : { *(.rela.data) *(.rela.data*) }
+	_data_size = . - _etext;
+
+	. = ALIGN(4096);
+	.dynsym   : { *(.dynsym) }
+	. = ALIGN(4096);
+	.dynstr   : { *(.dynstr) }
+	. = ALIGN(4096);
+	.note.gnu.build-id : { *(.note.gnu.build-id) }
+	/DISCARD/ : {
+		*(.rel.reloc)
+		*(.eh_frame)
+		*(.note.GNU-stack)
+	}
+	.comment 0 : { *(.comment) }
+}
diff --git a/roms/u-boot/arch/arm/lib/elf_arm_efi.lds b/roms/u-boot/arch/arm/lib/elf_arm_efi.lds
new file mode 100644
index 000000000..d6d742e86
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/elf_arm_efi.lds
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * U-Boot ARM EFI linker script
+ *
+ * Modified from elf_arm_efi.lds in gnu-efi
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text 0x0 : {
+		_text = .;
+		*(.text.head)
+		*(.text)
+		*(.text.*)
+		*(.gnu.linkonce.t.*)
+		*(.srodata)
+		*(.rodata*)
+		. = ALIGN(16);
+	}
+	_etext = .;
+	_text_size = . - _text;
+	.dynamic  : { *(.dynamic) }
+	.data : {
+		_data = .;
+		*(.sdata)
+		*(.data)
+		*(.data1)
+		*(.data.*)
+		*(.got.plt)
+		*(.got)
+
+		/*
+		 * The EFI loader doesn't seem to like a .bss section, so we
+		 * stick it all into .data:
+		 */
+		. = ALIGN(16);
+		_bss = .;
+		*(.sbss)
+		*(.scommon)
+		*(.dynbss)
+		*(.bss)
+		*(.bss.*)
+		*(COMMON)
+		. = ALIGN(16);
+		_bss_end = .;
+		_edata = .;
+	}
+	.rel.dyn : { *(.rel.dyn) }
+	.rel.plt : { *(.rel.plt) }
+	.rel.got : { *(.rel.got) }
+	.rel.data : { *(.rel.data) *(.rel.data*) }
+	_data_size = . - _etext;
+
+	/DISCARD/ : {
+		*(.rel.reloc)
+		*(.eh_frame)
+		*(.note.GNU-stack)
+		*(.dynsym)
+		*(.dynstr)
+		*(.note.gnu.build-id)
+		*(.comment)
+	}
+}
diff --git a/roms/u-boot/arch/arm/lib/gic-v3-its.c b/roms/u-boot/arch/arm/lib/gic-v3-its.c
new file mode 100644
index 000000000..2d3fdb600
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/gic-v3-its.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Broadcom.
+ */
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <asm/gic.h>
+#include <asm/gic-v3.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+
+static u32 lpi_id_bits;
+
+#define LPI_NRBITS		lpi_id_bits
+#define LPI_PROPBASE_SZ		ALIGN(BIT(LPI_NRBITS), SZ_64K)
+#define LPI_PENDBASE_SZ		ALIGN(BIT(LPI_NRBITS) / 8, SZ_64K)
+
+/* Number of GIC re-distributors */
+#define MAX_GIC_REDISTRIBUTORS	8
+
+/*
+ * gic_v3_its_priv - gic details
+ *
+ * @gicd_base: gicd base address
+ * @gicr_base: gicr base address
+ * @lpi_base: gic lpi base address
+ * @num_redist: number of gic re-distributors
+ */
+struct gic_v3_its_priv {
+	ulong gicd_base;
+	ulong gicr_base;
+	ulong lpi_base;
+	u32 num_redist;
+};
+
+static int gic_v3_its_get_gic_addr(struct gic_v3_its_priv *priv)
+{
+	struct udevice *dev;
+	fdt_addr_t addr;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_IRQ,
+					  DM_DRIVER_GET(arm_gic_v3_its), &dev);
+	if (ret) {
+		pr_err("%s: failed to get %s irq device\n", __func__,
+		       DM_DRIVER_GET(arm_gic_v3_its)->name);
+		return ret;
+	}
+
+	addr = dev_read_addr_index(dev, 0);
+	if (addr == FDT_ADDR_T_NONE) {
+		pr_err("%s: failed to get GICD address\n", __func__);
+		return -EINVAL;
+	}
+	priv->gicd_base = addr;
+
+	addr = dev_read_addr_index(dev, 1);
+	if (addr == FDT_ADDR_T_NONE) {
+		pr_err("%s: failed to get GICR address\n", __func__);
+		return -EINVAL;
+	}
+	priv->gicr_base = addr;
+
+	return 0;
+}
+
+static int gic_v3_its_get_gic_lpi_addr(struct gic_v3_its_priv *priv)
+{
+	struct regmap *regmap;
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_SYSCON,
+					  DM_DRIVER_GET(gic_lpi_syscon), &dev);
+	if (ret) {
+		pr_err("%s: failed to get %s syscon device\n", __func__,
+		       DM_DRIVER_GET(gic_lpi_syscon)->name);
+		return ret;
+	}
+
+	regmap = syscon_get_regmap(dev);
+	if (!regmap) {
+		pr_err("%s: failed to regmap for %s syscon device\n", __func__,
+		       DM_DRIVER_GET(gic_lpi_syscon)->name);
+		return -ENODEV;
+	}
+	priv->lpi_base = regmap->ranges[0].start;
+
+	priv->num_redist = dev_read_u32_default(dev, "max-gic-redistributors",
+						MAX_GIC_REDISTRIBUTORS);
+
+	return 0;
+}
+
+/*
+ * Program the GIC LPI configuration tables for all
+ * the re-distributors and enable the LPI table
+ */
+int gic_lpi_tables_init(void)
+{
+	struct gic_v3_its_priv priv;
+	u32 gicd_typer;
+	u64 val;
+	u64 tmp;
+	int i;
+	u64 redist_lpi_base;
+	u64 pend_base;
+	ulong pend_tab_total_sz;
+	void *pend_tab_va;
+
+	if (gic_v3_its_get_gic_addr(&priv))
+		return -EINVAL;
+
+	if (gic_v3_its_get_gic_lpi_addr(&priv))
+		return -EINVAL;
+
+	gicd_typer = readl((uintptr_t)(priv.gicd_base + GICD_TYPER));
+	/* GIC support for Locality specific peripheral interrupts (LPI's) */
+	if (!(gicd_typer & GICD_TYPER_LPIS)) {
+		pr_err("GIC implementation does not support LPI's\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Check for LPI is disabled for all the redistributors.
+	 * Once the LPI table is enabled, can not program the
+	 * LPI configuration tables again, unless the GIC is reset.
+	 */
+	for (i = 0; i < priv.num_redist; i++) {
+		u32 offset = i * GIC_REDISTRIBUTOR_OFFSET;
+
+		if ((readl((uintptr_t)(priv.gicr_base + offset))) &
+		    GICR_CTLR_ENABLE_LPIS) {
+			pr_err("Re-Distributor %d LPI is already enabled\n",
+			       i);
+			return -EINVAL;
+		}
+	}
+
+	/* lpi_id_bits to get LPI_PENDBASE_SZ and LPi_PROPBASE_SZ */
+	lpi_id_bits = min_t(u32, GICD_TYPER_ID_BITS(gicd_typer),
+			    ITS_MAX_LPI_NRBITS);
+
+	/* Set PropBase */
+	val = (priv.lpi_base |
+	       GICR_PROPBASER_INNERSHAREABLE |
+	       GICR_PROPBASER_RAWAWB |
+	       ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK));
+
+	writeq(val, (uintptr_t)(priv.gicr_base + GICR_PROPBASER));
+	tmp = readl((uintptr_t)(priv.gicr_base + GICR_PROPBASER));
+	if ((tmp ^ val) & GICR_PROPBASER_SHAREABILITY_MASK) {
+		if (!(tmp & GICR_PROPBASER_SHAREABILITY_MASK)) {
+			val &= ~(GICR_PROPBASER_SHAREABILITY_MASK |
+				GICR_PROPBASER_CACHEABILITY_MASK);
+			val |= GICR_PROPBASER_NC;
+			writeq(val,
+			       (uintptr_t)(priv.gicr_base + GICR_PROPBASER));
+		}
+	}
+
+	redist_lpi_base = priv.lpi_base + LPI_PROPBASE_SZ;
+	pend_tab_total_sz = priv.num_redist * LPI_PENDBASE_SZ;
+	pend_tab_va = map_physmem(redist_lpi_base, pend_tab_total_sz,
+				  MAP_NOCACHE);
+	memset(pend_tab_va, 0, pend_tab_total_sz);
+	flush_cache((ulong)pend_tab_va, pend_tab_total_sz);
+	unmap_physmem(pend_tab_va, MAP_NOCACHE);
+
+	pend_base = priv.gicr_base + GICR_PENDBASER;
+	for (i = 0; i < priv.num_redist; i++) {
+		u32 offset = i * GIC_REDISTRIBUTOR_OFFSET;
+
+		val = ((redist_lpi_base + (i * LPI_PENDBASE_SZ)) |
+			GICR_PENDBASER_INNERSHAREABLE |
+			GICR_PENDBASER_RAWAWB |
+			GICR_PENDBASER_PTZ);
+
+		writeq(val, (uintptr_t)(pend_base + offset));
+		tmp = readq((uintptr_t)(pend_base + offset));
+		if (!(tmp & GICR_PENDBASER_SHAREABILITY_MASK)) {
+			val &= ~(GICR_PENDBASER_SHAREABILITY_MASK |
+				 GICR_PENDBASER_CACHEABILITY_MASK);
+			val |= GICR_PENDBASER_NC;
+			writeq(val, (uintptr_t)(pend_base + offset));
+		}
+
+		/* Enable LPI for the redistributor */
+		writel(GICR_CTLR_ENABLE_LPIS,
+		       (uintptr_t)(priv.gicr_base + offset));
+	}
+
+	return 0;
+}
+
+static const struct udevice_id gic_v3_its_ids[] = {
+	{ .compatible = "arm,gic-v3" },
+	{}
+};
+
+U_BOOT_DRIVER(arm_gic_v3_its) = {
+	.name		= "gic-v3",
+	.id		= UCLASS_IRQ,
+	.of_match	= gic_v3_its_ids,
+};
+
+static const struct udevice_id gic_lpi_syscon_ids[] = {
+	{ .compatible = "gic-lpi-base" },
+	{}
+};
+
+U_BOOT_DRIVER(gic_lpi_syscon) = {
+	.name		= "gic-lpi-base",
+	.id		= UCLASS_SYSCON,
+	.of_match	= gic_lpi_syscon_ids,
+};
diff --git a/roms/u-boot/arch/arm/lib/gic_64.S b/roms/u-boot/arch/arm/lib/gic_64.S
new file mode 100644
index 000000000..155212a41
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/gic_64.S
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * GIC Initialization Routines.
+ *
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/gic.h>
+#include <asm/macro.h>
+
+
+/*************************************************************************
+ *
+ * void gic_init_secure(DistributorBase);
+ *
+ * Initialize secure copy of GIC at EL3.
+ *
+ *************************************************************************/
+ENTRY(gic_init_secure)
+	/*
+	 * Initialize Distributor
+	 * x0: Distributor Base
+	 */
+#if defined(CONFIG_GICV3)
+	mov	w9, #0x37		/* EnableGrp0 | EnableGrp1NS */
+					/* EnableGrp1S | ARE_S | ARE_NS */
+	str	w9, [x0, GICD_CTLR]	/* Secure GICD_CTLR */
+	ldr	w9, [x0, GICD_TYPER]
+	and	w10, w9, #0x1f		/* ITLinesNumber */
+	cbz	w10, 1f			/* No SPIs */
+	add	x11, x0, (GICD_IGROUPRn + 4)
+	add	x12, x0, (GICD_IGROUPMODRn + 4)
+	mov	w9, #~0
+0:	str	w9, [x11], #0x4
+	str	wzr, [x12], #0x4	/* Config SPIs as Group1NS */
+	sub	w10, w10, #0x1
+	cbnz	w10, 0b
+#elif defined(CONFIG_GICV2)
+	mov	w9, #0x3		/* EnableGrp0 | EnableGrp1 */
+	str	w9, [x0, GICD_CTLR]	/* Secure GICD_CTLR */
+	ldr	w9, [x0, GICD_TYPER]
+	and	w10, w9, #0x1f		/* ITLinesNumber */
+	cbz	w10, 1f			/* No SPIs */
+	add	x11, x0, GICD_IGROUPRn
+	mov	w9, #~0			/* Config SPIs as Grp1 */
+	str	w9, [x11], #0x4
+0:	str	w9, [x11], #0x4
+	sub	w10, w10, #0x1
+	cbnz	w10, 0b
+
+	ldr	x1, =GICC_BASE		/* GICC_CTLR */
+	mov	w0, #3			/* EnableGrp0 | EnableGrp1 */
+	str	w0, [x1]
+
+	mov	w0, #1 << 7		/* allow NS access to GICC_PMR */
+	str	w0, [x1, #4]		/* GICC_PMR */
+#endif
+1:
+	ret
+ENDPROC(gic_init_secure)
+
+
+/*************************************************************************
+ * For Gicv2:
+ * void gic_init_secure_percpu(DistributorBase, CpuInterfaceBase);
+ * For Gicv3:
+ * void gic_init_secure_percpu(ReDistributorBase);
+ *
+ * Initialize secure copy of GIC at EL3.
+ *
+ *************************************************************************/
+ENTRY(gic_init_secure_percpu)
+#if defined(CONFIG_GICV3)
+	/*
+	 * Initialize ReDistributor
+	 * x0: ReDistributor Base
+	 */
+	mrs	x10, mpidr_el1
+	lsr	x9, x10, #32
+	bfi	x10, x9, #24, #8	/* w10 is aff3:aff2:aff1:aff0 */
+	mov	x9, x0
+1:	ldr	x11, [x9, GICR_TYPER]
+	lsr	x11, x11, #32		/* w11 is aff3:aff2:aff1:aff0 */
+	cmp	w10, w11
+	b.eq	2f
+	add	x9, x9, #(2 << 16)
+	b	1b
+
+	/* x9: ReDistributor Base Address of Current CPU */
+2:	mov	w10, #~0x2
+	ldr	w11, [x9, GICR_WAKER]
+	and	w11, w11, w10		/* Clear ProcessorSleep */
+	str	w11, [x9, GICR_WAKER]
+	dsb	st
+	isb
+3:	ldr	w10, [x9, GICR_WAKER]
+	tbnz	w10, #2, 3b		/* Wait Children be Alive */
+
+	add	x10, x9, #(1 << 16)	/* SGI_Base */
+	mov	w11, #~0
+	str	w11, [x10, GICR_IGROUPRn]
+	str	wzr, [x10, GICR_IGROUPMODRn]	/* SGIs|PPIs Group1NS */
+	mov	w11, #0x1		/* Enable SGI 0 */
+	str	w11, [x10, GICR_ISENABLERn]
+
+	switch_el x10, 3f, 2f, 1f
+3:
+	/* Initialize Cpu Interface */
+	mrs	x10, ICC_SRE_EL3
+	orr	x10, x10, #0xf		/* SRE & Disable IRQ/FIQ Bypass & */
+					/* Allow EL2 access to ICC_SRE_EL2 */
+	msr	ICC_SRE_EL3, x10
+	isb
+
+	mov	x10, #0x3		/* EnableGrp1NS | EnableGrp1S */
+	msr	ICC_IGRPEN1_EL3, x10
+	isb
+
+	msr	ICC_CTLR_EL3, xzr
+	isb
+2:
+	mrs	x10, ICC_SRE_EL2
+	orr	x10, x10, #0xf		/* SRE & Disable IRQ/FIQ Bypass & */
+					/* Allow EL1 access to ICC_SRE_EL1 */
+	msr	ICC_SRE_EL2, x10
+	isb
+1:
+	msr	ICC_CTLR_EL1, xzr	/* NonSecure ICC_CTLR_EL1 */
+	isb
+
+	mov	x10, #0x1 << 7		/* Non-Secure access to ICC_PMR_EL1 */
+	msr	ICC_PMR_EL1, x10
+	isb
+#elif defined(CONFIG_GICV2)
+	/*
+	 * Initialize SGIs and PPIs
+	 * x0: Distributor Base
+	 * x1: Cpu Interface Base
+	 */
+	mov	w9, #~0			/* Config SGIs and PPIs as Grp1 */
+	str	w9, [x0, GICD_IGROUPRn]	/* GICD_IGROUPR0 */
+	mov	w9, #0x1		/* Enable SGI 0 */
+	str	w9, [x0, GICD_ISENABLERn]
+
+	/* Initialize Cpu Interface */
+	mov	w9, #0x1e7		/* Disable IRQ/FIQ Bypass & */
+					/* Enable Ack Group1 Interrupt & */
+					/* EnableGrp0 & EnableGrp1 */
+	str	w9, [x1, GICC_CTLR]	/* Secure GICC_CTLR */
+
+	mov	w9, #0x1 << 7		/* Non-Secure access to GICC_PMR */
+	str	w9, [x1, GICC_PMR]
+#endif
+	ret
+ENDPROC(gic_init_secure_percpu)
+
+
+/*************************************************************************
+ * For Gicv2:
+ * void gic_kick_secondary_cpus(DistributorBase);
+ * For Gicv3:
+ * void gic_kick_secondary_cpus(void);
+ *
+ *************************************************************************/
+ENTRY(gic_kick_secondary_cpus)
+#if defined(CONFIG_GICV3)
+	mov	x9, #(1 << 40)
+	msr	ICC_ASGI1R_EL1, x9
+	isb
+#elif defined(CONFIG_GICV2)
+	mov	w9, #0x8000
+	movk	w9, #0x100, lsl #16
+	str	w9, [x0, GICD_SGIR]
+#endif
+	ret
+ENDPROC(gic_kick_secondary_cpus)
+
+
+/*************************************************************************
+ * For Gicv2:
+ * void gic_wait_for_interrupt(CpuInterfaceBase);
+ * For Gicv3:
+ * void gic_wait_for_interrupt(void);
+ *
+ * Wait for SGI 0 from master.
+ *
+ *************************************************************************/
+ENTRY(gic_wait_for_interrupt)
+#if defined(CONFIG_GICV3)
+	gic_wait_for_interrupt_m x9
+#elif defined(CONFIG_GICV2)
+	gic_wait_for_interrupt_m x0, w9
+#endif
+	ret
+ENDPROC(gic_wait_for_interrupt)
diff --git a/roms/u-boot/arch/arm/lib/image.c b/roms/u-boot/arch/arm/lib/image.c
new file mode 100644
index 000000000..e394c1ad9
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/image.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2009
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#include <common.h>
+#include <image.h>
+#include <mapmem.h>
+#include <asm/global_data.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define LINUX_ARM64_IMAGE_MAGIC 0x644d5241
+
+/* See Documentation/arm64/booting.txt in the Linux kernel */
+struct Image_header {
+	uint32_t	code0;		/* Executable code */
+	uint32_t	code1;		/* Executable code */
+	uint64_t	text_offset;	/* Image load offset, LE */
+	uint64_t	image_size;	/* Effective Image size, LE */
+	uint64_t	flags;		/* Kernel flags, LE */
+	uint64_t	res2;		/* reserved */
+	uint64_t	res3;		/* reserved */
+	uint64_t	res4;		/* reserved */
+	uint32_t	magic;		/* Magic number */
+	uint32_t	res5;
+};
+
+int booti_setup(ulong image, ulong *relocated_addr, ulong *size,
+		bool force_reloc)
+{
+	struct Image_header *ih;
+	uint64_t dst;
+	uint64_t image_size, text_offset;
+
+	*relocated_addr = image;
+
+	ih = (struct Image_header *)map_sysmem(image, 0);
+
+	if (ih->magic != le32_to_cpu(LINUX_ARM64_IMAGE_MAGIC)) {
+		puts("Bad Linux ARM64 Image magic!\n");
+		return 1;
+	}
+
+	/*
+	 * Prior to Linux commit a2c1d73b94ed, the text_offset field
+	 * is of unknown endianness.  In these cases, the image_size
+	 * field is zero, and we can assume a fixed value of 0x80000.
+	 */
+	if (ih->image_size == 0) {
+		puts("Image lacks image_size field, assuming 16MiB\n");
+		image_size = 16 << 20;
+		text_offset = 0x80000;
+	} else {
+		image_size = le64_to_cpu(ih->image_size);
+		text_offset = le64_to_cpu(ih->text_offset);
+	}
+
+	*size = image_size;
+
+	/*
+	 * If bit 3 of the flags field is set, the 2MB aligned base of the
+	 * kernel image can be anywhere in physical memory, so respect
+	 * images->ep.  Otherwise, relocate the image to the base of RAM
+	 * since memory below it is not accessible via the linear mapping.
+	 */
+	if (!force_reloc && (le64_to_cpu(ih->flags) & BIT(3)))
+		dst = image - text_offset;
+	else
+		dst = gd->bd->bi_dram[0].start;
+
+	*relocated_addr = ALIGN(dst, SZ_2M) + text_offset;
+
+	unmap_sysmem(ih);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/lib/interrupts.c b/roms/u-boot/arch/arm/lib/interrupts.c
new file mode 100644
index 000000000..6dc27d1d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/interrupts.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <efi_loader.h>
+#include <irq_func.h>
+#include <asm/global_data.h>
+#include <asm/proc-armv/ptrace.h>
+#include <asm/ptrace.h>
+#include <asm/u-boot-arm.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int interrupt_init(void)
+{
+	/*
+	 * setup up stacks if necessary
+	 */
+	IRQ_STACK_START_IN = gd->irq_sp + 8;
+
+	enable_interrupts();
+
+	return 0;
+}
+
+void enable_interrupts(void)
+{
+	return;
+}
+int disable_interrupts(void)
+{
+	return 0;
+}
+
+void bad_mode (void)
+{
+	panic ("Resetting CPU ...\n");
+	reset_cpu();
+}
+
+static void show_efi_loaded_images(struct pt_regs *regs)
+{
+	efi_print_image_infos((void *)instruction_pointer(regs));
+}
+
+static void dump_instr(struct pt_regs *regs)
+{
+	unsigned long addr = instruction_pointer(regs);
+	const int thumb = thumb_mode(regs);
+	const int width = thumb ? 4 : 8;
+	int i;
+
+	if (thumb)
+		addr &= ~1L;
+	else
+		addr &= ~3L;
+	printf("Code: ");
+	for (i = -4; i < 1 + !!thumb; i++) {
+		unsigned int val;
+
+		if (thumb)
+			val = ((u16 *)addr)[i];
+		else
+			val = ((u32 *)addr)[i];
+		printf(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+	}
+	printf("\n");
+}
+
+void show_regs (struct pt_regs *regs)
+{
+	unsigned long __maybe_unused flags;
+	const char __maybe_unused *processor_modes[] = {
+	"USER_26",	"FIQ_26",	"IRQ_26",	"SVC_26",
+	"UK4_26",	"UK5_26",	"UK6_26",	"UK7_26",
+	"UK8_26",	"UK9_26",	"UK10_26",	"UK11_26",
+	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26",
+	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32",
+	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32",
+	"UK8_32",	"UK9_32",	"HYP_32",	"UND_32",
+	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32",
+	};
+
+	flags = condition_codes (regs);
+
+	printf("pc : [<%08lx>]	   lr : [<%08lx>]\n",
+	       instruction_pointer(regs), regs->ARM_lr);
+	if (gd->flags & GD_FLG_RELOC) {
+		printf("reloc pc : [<%08lx>]	   lr : [<%08lx>]\n",
+		       instruction_pointer(regs) - gd->reloc_off,
+		       regs->ARM_lr - gd->reloc_off);
+	}
+	printf("sp : %08lx  ip : %08lx	 fp : %08lx\n",
+	       regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+	printf ("r10: %08lx  r9 : %08lx	 r8 : %08lx\n",
+		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+	printf ("r7 : %08lx  r6 : %08lx	 r5 : %08lx  r4 : %08lx\n",
+		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+	printf ("r3 : %08lx  r2 : %08lx	 r1 : %08lx  r0 : %08lx\n",
+		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+	printf ("Flags: %c%c%c%c",
+		flags & CC_N_BIT ? 'N' : 'n',
+		flags & CC_Z_BIT ? 'Z' : 'z',
+		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+	printf ("  IRQs %s  FIQs %s  Mode %s%s\n",
+		interrupts_enabled (regs) ? "on" : "off",
+		fast_interrupts_enabled (regs) ? "on" : "off",
+		processor_modes[processor_mode (regs)],
+		thumb_mode (regs) ? " (T)" : "");
+	dump_instr(regs);
+}
+
+/* fixup PC to point to the instruction leading to the exception */
+static inline void fixup_pc(struct pt_regs *regs, int offset)
+{
+	uint32_t pc = instruction_pointer(regs) + offset;
+	regs->ARM_pc = pc | (regs->ARM_pc & PCMASK);
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+	efi_restore_gd();
+	printf ("undefined instruction\n");
+	fixup_pc(pt_regs, -4);
+	show_regs (pt_regs);
+	show_efi_loaded_images(pt_regs);
+	bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+	efi_restore_gd();
+	printf ("software interrupt\n");
+	fixup_pc(pt_regs, -4);
+	show_regs (pt_regs);
+	show_efi_loaded_images(pt_regs);
+	bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+	efi_restore_gd();
+	printf ("prefetch abort\n");
+	fixup_pc(pt_regs, -8);
+	show_regs (pt_regs);
+	show_efi_loaded_images(pt_regs);
+	bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+	efi_restore_gd();
+	printf ("data abort\n");
+	fixup_pc(pt_regs, -8);
+	show_regs (pt_regs);
+	show_efi_loaded_images(pt_regs);
+	bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+	efi_restore_gd();
+	printf ("not used\n");
+	fixup_pc(pt_regs, -8);
+	show_regs (pt_regs);
+	show_efi_loaded_images(pt_regs);
+	bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+	efi_restore_gd();
+	printf ("fast interrupt request\n");
+	fixup_pc(pt_regs, -8);
+	show_regs (pt_regs);
+	show_efi_loaded_images(pt_regs);
+	bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+	efi_restore_gd();
+	printf ("interrupt request\n");
+	fixup_pc(pt_regs, -8);
+	show_regs (pt_regs);
+	show_efi_loaded_images(pt_regs);
+	bad_mode ();
+}
diff --git a/roms/u-boot/arch/arm/lib/interrupts_64.c b/roms/u-boot/arch/arm/lib/interrupts_64.c
new file mode 100644
index 000000000..c653e67db
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/interrupts_64.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <common.h>
+#include <asm/global_data.h>
+#include <asm/ptrace.h>
+#include <irq_func.h>
+#include <linux/compiler.h>
+#include <efi_loader.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int interrupt_init(void)
+{
+	enable_interrupts();
+
+	return 0;
+}
+
+void enable_interrupts(void)
+{
+	return;
+}
+
+int disable_interrupts(void)
+{
+	return 0;
+}
+
+static void show_efi_loaded_images(struct pt_regs *regs)
+{
+	efi_print_image_infos((void *)regs->elr);
+}
+
+static void dump_instr(struct pt_regs *regs)
+{
+	u32 *addr = (u32 *)(regs->elr & ~3UL);
+	int i;
+
+	printf("Code: ");
+	for (i = -4; i < 1; i++)
+		printf(i == 0 ? "(%08x) " : "%08x ", addr[i]);
+	printf("\n");
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	int i;
+
+	if (gd->flags & GD_FLG_RELOC)
+		printf("elr: %016lx lr : %016lx (reloc)\n",
+		       regs->elr - gd->reloc_off,
+		       regs->regs[30] - gd->reloc_off);
+	printf("elr: %016lx lr : %016lx\n", regs->elr, regs->regs[30]);
+
+	for (i = 0; i < 29; i += 2)
+		printf("x%-2d: %016lx x%-2d: %016lx\n",
+		       i, regs->regs[i], i+1, regs->regs[i+1]);
+	printf("\n");
+	dump_instr(regs);
+}
+
+/*
+ * do_bad_sync handles the impossible case in the Synchronous Abort vector.
+ */
+void do_bad_sync(struct pt_regs *pt_regs, unsigned int esr)
+{
+	efi_restore_gd();
+	printf("Bad mode in \"Synchronous Abort\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	show_efi_loaded_images(pt_regs);
+	panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_irq handles the impossible case in the Irq vector.
+ */
+void do_bad_irq(struct pt_regs *pt_regs, unsigned int esr)
+{
+	efi_restore_gd();
+	printf("Bad mode in \"Irq\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	show_efi_loaded_images(pt_regs);
+	panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_fiq handles the impossible case in the Fiq vector.
+ */
+void do_bad_fiq(struct pt_regs *pt_regs, unsigned int esr)
+{
+	efi_restore_gd();
+	printf("Bad mode in \"Fiq\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	show_efi_loaded_images(pt_regs);
+	panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_error handles the impossible case in the Error vector.
+ */
+void do_bad_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+	efi_restore_gd();
+	printf("Bad mode in \"Error\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	show_efi_loaded_images(pt_regs);
+	panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_sync handles the Synchronous Abort exception.
+ */
+void do_sync(struct pt_regs *pt_regs, unsigned int esr)
+{
+	efi_restore_gd();
+	printf("\"Synchronous Abort\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	show_efi_loaded_images(pt_regs);
+	panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_irq handles the Irq exception.
+ */
+void do_irq(struct pt_regs *pt_regs, unsigned int esr)
+{
+	efi_restore_gd();
+	printf("\"Irq\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	show_efi_loaded_images(pt_regs);
+	panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_fiq handles the Fiq exception.
+ */
+void do_fiq(struct pt_regs *pt_regs, unsigned int esr)
+{
+	efi_restore_gd();
+	printf("\"Fiq\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	show_efi_loaded_images(pt_regs);
+	panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_error handles the Error exception.
+ * Errors are more likely to be processor specific,
+ * it is defined with weak attribute and can be redefined
+ * in processor specific code.
+ */
+void __weak do_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+	efi_restore_gd();
+	printf("\"Error\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	show_efi_loaded_images(pt_regs);
+	panic("Resetting CPU ...\n");
+}
diff --git a/roms/u-boot/arch/arm/lib/interrupts_m.c b/roms/u-boot/arch/arm/lib/interrupts_m.c
new file mode 100644
index 000000000..277854aa8
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/interrupts_m.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+
+/*
+ * Upon exception entry ARMv7-M processors automatically save stack
+ * frames containing some registers. For simplicity initial
+ * implementation uses only this auto-saved stack frame.
+ * This does not contain complete register set dump,
+ * only R0-R3, R12, LR, PC and xPSR are saved.
+ */
+
+struct autosave_regs {
+	long uregs[8];
+};
+
+#define ARM_XPSR	uregs[7]
+#define ARM_PC		uregs[6]
+#define ARM_LR		uregs[5]
+#define ARM_R12		uregs[4]
+#define ARM_R3		uregs[3]
+#define ARM_R2		uregs[2]
+#define ARM_R1		uregs[1]
+#define ARM_R0		uregs[0]
+
+int interrupt_init(void)
+{
+	enable_interrupts();
+
+	return 0;
+}
+
+void enable_interrupts(void)
+{
+	return;
+}
+
+int disable_interrupts(void)
+{
+	return 0;
+}
+
+void dump_regs(struct autosave_regs *regs)
+{
+	printf("pc : %08lx    lr : %08lx    xPSR : %08lx\n",
+	       regs->ARM_PC, regs->ARM_LR, regs->ARM_XPSR);
+	printf("r12 : %08lx   r3 : %08lx    r2 : %08lx\n"
+		"r1 : %08lx    r0 : %08lx\n",
+		regs->ARM_R12, regs->ARM_R3, regs->ARM_R2,
+		regs->ARM_R1, regs->ARM_R0);
+}
+
+void bad_mode(void)
+{
+	panic("Resetting CPU ...\n");
+	reset_cpu();
+}
+
+void do_hard_fault(struct autosave_regs *autosave_regs)
+{
+	printf("Hard fault\n");
+	dump_regs(autosave_regs);
+	bad_mode();
+}
+
+void do_mm_fault(struct autosave_regs *autosave_regs)
+{
+	printf("Memory management fault\n");
+	dump_regs(autosave_regs);
+	bad_mode();
+}
+
+void do_bus_fault(struct autosave_regs *autosave_regs)
+{
+	printf("Bus fault\n");
+	dump_regs(autosave_regs);
+	bad_mode();
+}
+
+void do_usage_fault(struct autosave_regs *autosave_regs)
+{
+	printf("Usage fault\n");
+	dump_regs(autosave_regs);
+	bad_mode();
+}
+
+void do_invalid_entry(struct autosave_regs *autosave_regs)
+{
+	printf("Exception\n");
+	dump_regs(autosave_regs);
+	bad_mode();
+}
diff --git a/roms/u-boot/arch/arm/lib/lib1funcs.S b/roms/u-boot/arch/arm/lib/lib1funcs.S
new file mode 100644
index 000000000..0798d098a
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/lib1funcs.S
@@ -0,0 +1,427 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines
+ *
+ * Author: Nicolas Pitre <nico@fluxnic.net>
+ *   - contributed to gcc-3.4 on Sep 30, 2003
+ *   - adapted for the Linux kernel on Oct 2, 2003
+ */
+/*
+ * Copyright 1995, 1996, 1998, 1999, 2000, 2003 Free Software Foundation, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * U-Boot compatibility bit, define empty UNWIND() macro as, since we
+ * do not support stack unwinding and define CONFIG_AEABI to make all
+ * of the functions available without diverging from Linux code.
+ */
+#ifdef __UBOOT__
+#define UNWIND(x...)
+#define CONFIG_AEABI
+#endif
+
+.macro ARM_DIV_BODY dividend, divisor, result, curbit
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	\curbit, \divisor
+	clz	\result, \dividend
+	sub	\result, \curbit, \result
+	mov	\curbit, #1
+	mov	\divisor, \divisor, lsl \result
+	mov	\curbit, \curbit, lsl \result
+	mov	\result, #0
+	
+#else
+
+	@ Initially shift the divisor left 3 bits if possible,
+	@ set curbit accordingly.  This allows for curbit to be located
+	@ at the left end of each 4 bit nibbles in the division loop
+	@ to save one loop in most cases.
+	tst	\divisor, #0xe0000000
+	moveq	\divisor, \divisor, lsl #3
+	moveq	\curbit, #8
+	movne	\curbit, #1
+
+	@ Unless the divisor is very big, shift it up in multiples of
+	@ four bits, since this is the amount of unwinding in the main
+	@ division loop.  Continue shifting until the divisor is 
+	@ larger than the dividend.
+1:	cmp	\divisor, #0x10000000
+	cmplo	\divisor, \dividend
+	movlo	\divisor, \divisor, lsl #4
+	movlo	\curbit, \curbit, lsl #4
+	blo	1b
+
+	@ For very big divisors, we must shift it a bit at a time, or
+	@ we will be in danger of overflowing.
+1:	cmp	\divisor, #0x80000000
+	cmplo	\divisor, \dividend
+	movlo	\divisor, \divisor, lsl #1
+	movlo	\curbit, \curbit, lsl #1
+	blo	1b
+
+	mov	\result, #0
+
+#endif
+
+	@ Division loop
+1:	cmp	\dividend, \divisor
+	subhs	\dividend, \dividend, \divisor
+	orrhs	\result,   \result,   \curbit
+	cmp	\dividend, \divisor,  lsr #1
+	subhs	\dividend, \dividend, \divisor, lsr #1
+	orrhs	\result,   \result,   \curbit,  lsr #1
+	cmp	\dividend, \divisor,  lsr #2
+	subhs	\dividend, \dividend, \divisor, lsr #2
+	orrhs	\result,   \result,   \curbit,  lsr #2
+	cmp	\dividend, \divisor,  lsr #3
+	subhs	\dividend, \dividend, \divisor, lsr #3
+	orrhs	\result,   \result,   \curbit,  lsr #3
+	cmp	\dividend, #0			@ Early termination?
+	movsne	\curbit,   \curbit,  lsr #4	@ No, any more bits to do?
+	movne	\divisor,  \divisor, lsr #4
+	bne	1b
+
+.endm
+
+
+.macro ARM_DIV2_ORDER divisor, order
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	\order, \divisor
+	rsb	\order, \order, #31
+
+#else
+
+	cmp	\divisor, #(1 << 16)
+	movhs	\divisor, \divisor, lsr #16
+	movhs	\order, #16
+	movlo	\order, #0
+
+	cmp	\divisor, #(1 << 8)
+	movhs	\divisor, \divisor, lsr #8
+	addhs	\order, \order, #8
+
+	cmp	\divisor, #(1 << 4)
+	movhs	\divisor, \divisor, lsr #4
+	addhs	\order, \order, #4
+
+	cmp	\divisor, #(1 << 2)
+	addhi	\order, \order, #3
+	addls	\order, \order, \divisor, lsr #1
+
+#endif
+
+.endm
+
+
+.macro ARM_MOD_BODY dividend, divisor, order, spare
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	\order, \divisor
+	clz	\spare, \dividend
+	sub	\order, \order, \spare
+	mov	\divisor, \divisor, lsl \order
+
+#else
+
+	mov	\order, #0
+
+	@ Unless the divisor is very big, shift it up in multiples of
+	@ four bits, since this is the amount of unwinding in the main
+	@ division loop.  Continue shifting until the divisor is 
+	@ larger than the dividend.
+1:	cmp	\divisor, #0x10000000
+	cmplo	\divisor, \dividend
+	movlo	\divisor, \divisor, lsl #4
+	addlo	\order, \order, #4
+	blo	1b
+
+	@ For very big divisors, we must shift it a bit at a time, or
+	@ we will be in danger of overflowing.
+1:	cmp	\divisor, #0x80000000
+	cmplo	\divisor, \dividend
+	movlo	\divisor, \divisor, lsl #1
+	addlo	\order, \order, #1
+	blo	1b
+
+#endif
+
+	@ Perform all needed subtractions to keep only the reminder.
+	@ Do comparisons in batch of 4 first.
+	subs	\order, \order, #3		@ yes, 3 is intended here
+	blt	2f
+
+1:	cmp	\dividend, \divisor
+	subhs	\dividend, \dividend, \divisor
+	cmp	\dividend, \divisor,  lsr #1
+	subhs	\dividend, \dividend, \divisor, lsr #1
+	cmp	\dividend, \divisor,  lsr #2
+	subhs	\dividend, \dividend, \divisor, lsr #2
+	cmp	\dividend, \divisor,  lsr #3
+	subhs	\dividend, \dividend, \divisor, lsr #3
+	cmp	\dividend, #1
+	mov	\divisor, \divisor, lsr #4
+	subsge	\order, \order, #4
+	bge	1b
+
+	tst	\order, #3
+	teqne	\dividend, #0
+	beq	5f
+
+	@ Either 1, 2 or 3 comparison/subtractions are left.
+2:	cmn	\order, #2
+	blt	4f
+	beq	3f
+	cmp	\dividend, \divisor
+	subhs	\dividend, \dividend, \divisor
+	mov	\divisor,  \divisor,  lsr #1
+3:	cmp	\dividend, \divisor
+	subhs	\dividend, \dividend, \divisor
+	mov	\divisor,  \divisor,  lsr #1
+4:	cmp	\dividend, \divisor
+	subhs	\dividend, \dividend, \divisor
+5:
+.endm
+
+
+.pushsection .text.__udivsi3, "ax"
+ENTRY(__udivsi3)
+ENTRY(__aeabi_uidiv)
+UNWIND(.fnstart)
+
+	subs	r2, r1, #1
+	reteq	lr
+	bcc	Ldiv0
+	cmp	r0, r1
+	bls	11f
+	tst	r1, r2
+	beq	12f
+
+	ARM_DIV_BODY r0, r1, r2, r3
+
+	mov	r0, r2
+	ret	lr
+
+11:	moveq	r0, #1
+	movne	r0, #0
+	ret	lr
+
+12:	ARM_DIV2_ORDER r1, r2
+
+	mov	r0, r0, lsr r2
+	ret	lr
+
+UNWIND(.fnend)
+ENDPROC(__udivsi3)
+ENDPROC(__aeabi_uidiv)
+.popsection
+
+.pushsection .text.__umodsi3, "ax"
+ENTRY(__umodsi3)
+UNWIND(.fnstart)
+
+	subs	r2, r1, #1			@ compare divisor with 1
+	bcc	Ldiv0
+	cmpne	r0, r1				@ compare dividend with divisor
+	moveq   r0, #0
+	tsthi	r1, r2				@ see if divisor is power of 2
+	andeq	r0, r0, r2
+	retls	lr
+
+	ARM_MOD_BODY r0, r1, r2, r3
+
+	ret	lr
+
+UNWIND(.fnend)
+ENDPROC(__umodsi3)
+.popsection
+
+.pushsection .text.__divsi3, "ax"
+ENTRY(__divsi3)
+ENTRY(__aeabi_idiv)
+UNWIND(.fnstart)
+
+	cmp	r1, #0
+	eor	ip, r0, r1			@ save the sign of the result.
+	beq	Ldiv0
+	rsbmi	r1, r1, #0			@ loops below use unsigned.
+	subs	r2, r1, #1			@ division by 1 or -1 ?
+	beq	10f
+	movs	r3, r0
+	rsbmi	r3, r0, #0			@ positive dividend value
+	cmp	r3, r1
+	bls	11f
+	tst	r1, r2				@ divisor is power of 2 ?
+	beq	12f
+
+	ARM_DIV_BODY r3, r1, r0, r2
+
+	cmp	ip, #0
+	rsbmi	r0, r0, #0
+	ret	lr
+
+10:	teq	ip, r0				@ same sign ?
+	rsbmi	r0, r0, #0
+	ret	lr
+
+11:	movlo	r0, #0
+	moveq	r0, ip, asr #31
+	orreq	r0, r0, #1
+	ret	lr
+
+12:	ARM_DIV2_ORDER r1, r2
+
+	cmp	ip, #0
+	mov	r0, r3, lsr r2
+	rsbmi	r0, r0, #0
+	ret	lr
+
+UNWIND(.fnend)
+ENDPROC(__divsi3)
+ENDPROC(__aeabi_idiv)
+.popsection
+
+.pushsection .text.__modsi3, "ax"
+ENTRY(__modsi3)
+UNWIND(.fnstart)
+
+	cmp	r1, #0
+	beq	Ldiv0
+	rsbmi	r1, r1, #0			@ loops below use unsigned.
+	movs	ip, r0				@ preserve sign of dividend
+	rsbmi	r0, r0, #0			@ if negative make positive
+	subs	r2, r1, #1			@ compare divisor with 1
+	cmpne	r0, r1				@ compare dividend with divisor
+	moveq	r0, #0
+	tsthi	r1, r2				@ see if divisor is power of 2
+	andeq	r0, r0, r2
+	bls	10f
+
+	ARM_MOD_BODY r0, r1, r2, r3
+
+10:	cmp	ip, #0
+	rsbmi	r0, r0, #0
+	ret	lr
+
+UNWIND(.fnend)
+ENDPROC(__modsi3)
+.popsection
+
+#ifdef CONFIG_AEABI
+
+.pushsection .text.__aeabi_uidivmod, "ax"
+ENTRY(__aeabi_uidivmod)
+UNWIND(.fnstart)
+UNWIND(.save {r0, r1, ip, lr}	)
+
+	stmfd	sp!, {r0, r1, ip, lr}
+	bl	__aeabi_uidiv
+	ldmfd	sp!, {r1, r2, ip, lr}
+	mul	r3, r0, r2
+	sub	r1, r1, r3
+	ret	lr
+
+UNWIND(.fnend)
+ENDPROC(__aeabi_uidivmod)
+.popsection
+
+.pushsection .text.__aeabi_uidivmod, "ax"
+ENTRY(__aeabi_idivmod)
+UNWIND(.fnstart)
+UNWIND(.save {r0, r1, ip, lr}	)
+
+	stmfd	sp!, {r0, r1, ip, lr}
+	bl	__aeabi_idiv
+	ldmfd	sp!, {r1, r2, ip, lr}
+	mul	r3, r0, r2
+	sub	r1, r1, r3
+	ret	lr
+
+UNWIND(.fnend)
+ENDPROC(__aeabi_idivmod)
+.popsection
+
+#endif
+
+.pushsection .text.Ldiv0, "ax"
+Ldiv0:
+UNWIND(.fnstart)
+UNWIND(.pad #4)
+UNWIND(.save {lr})
+
+	str	lr, [sp, #-8]!
+	bl	__div0
+	mov	r0, #0			@ About as wrong as it could be.
+	ldr	pc, [sp], #8
+
+UNWIND(.fnend)
+ENDPROC(Ldiv0)
+.popsection
+
+/* Thumb-1 specialities */
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD) && !defined(CONFIG_HAS_THUMB2)
+.pushsection .text.__gnu_thumb1_case_sqi, "ax"
+ENTRY(__gnu_thumb1_case_sqi)
+	push	{r1}
+	mov	r1, lr
+	lsrs	r1, r1, #1
+	lsls	r1, r1, #1
+	ldrsb	r1, [r1, r0]
+	lsls	r1, r1, #1
+	add	lr, lr, r1
+	pop	{r1}
+	bx	lr
+ENDPROC(__gnu_thumb1_case_sqi)
+.popsection
+
+.pushsection .text.__gnu_thumb1_case_uqi, "ax"
+ENTRY(__gnu_thumb1_case_uqi)
+	push	{r1}
+	mov	r1, lr
+	lsrs	r1, r1, #1
+	lsls	r1, r1, #1
+	ldrb	r1, [r1, r0]
+	lsls	r1, r1, #1
+	add	lr, lr, r1
+	pop	{r1}
+	bx	lr
+ENDPROC(__gnu_thumb1_case_uqi)
+.popsection
+
+.pushsection .text.__gnu_thumb1_case_shi, "ax"
+ENTRY(__gnu_thumb1_case_shi)
+	push	{r0, r1}
+	mov	r1, lr
+	lsrs	r1, r1, #1
+	lsls	r0, r0, #1
+	lsls	r1, r1, #1
+	ldrsh	r1, [r1, r0]
+	lsls	r1, r1, #1
+	add	lr, lr, r1
+	pop	{r0, r1}
+	bx	lr
+ENDPROC(__gnu_thumb1_case_shi)
+.popsection
+
+.pushsection .text.__gnu_thumb1_case_uhi, "ax"
+ENTRY(__gnu_thumb1_case_uhi)
+	push	{r0, r1}
+	mov	r1, lr
+	lsrs	r1, r1, #1
+	lsls	r0, r0, #1
+	lsls	r1, r1, #1
+	ldrh	r1, [r1, r0]
+	lsls	r1, r1, #1
+	add	lr, lr, r1
+	pop	{r0, r1}
+	bx	lr
+ENDPROC(__gnu_thumb1_case_uhi)
+.popsection
+#endif
diff --git a/roms/u-boot/arch/arm/lib/lshrdi3.S b/roms/u-boot/arch/arm/lib/lshrdi3.S
new file mode 100644
index 000000000..cfa5607c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/lshrdi3.S
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+.pushsection .text.__lshldi3, "ax"
+ENTRY(__lshrdi3)
+ENTRY(__aeabi_llsr)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	al, al, lsr r2
+	movpl	al, ah, lsr r3
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
+	mov	ah, ah, lsr r2
+	ret	lr
+
+ENDPROC(__lshrdi3)
+ENDPROC(__aeabi_llsr)
+.popsection
diff --git a/roms/u-boot/arch/arm/lib/memcpy.S b/roms/u-boot/arch/arm/lib/memcpy.S
new file mode 100644
index 000000000..f7fb77235
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/memcpy.S
@@ -0,0 +1,264 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  linux/arch/arm/lib/memcpy.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 28, 2005
+ *  Copyright:	MontaVista Software, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#define LDR1W_SHIFT	0
+#define STR1W_SHIFT	0
+
+	.macro ldr1w ptr reg abort
+	W(ldr) \reg, [\ptr], #4
+	.endm
+
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
+	.endm
+
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
+
+	.macro ldr1b ptr reg cond=al abort
+	ldrb\cond\() \reg, [\ptr], #1
+	.endm
+
+	.macro str1w ptr reg abort
+	W(str) \reg, [\ptr], #4
+	.endm
+
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
+
+	.macro str1b ptr reg cond=al abort
+	strb\cond\() \reg, [\ptr], #1
+	.endm
+
+	.macro enter reg1 reg2
+	stmdb sp!, {r0, \reg1, \reg2}
+	.endm
+
+	.macro exit reg1 reg2
+	ldmfd sp!, {r0, \reg1, \reg2}
+	.endm
+
+	.text
+
+/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
+	.syntax unified
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD) && !defined(MEMCPY_NO_THUMB_BUILD)
+	.thumb
+	.thumb_func
+#endif
+ENTRY(memcpy)
+		cmp	r0, r1
+		bxeq	lr
+
+		enter	r4, lr
+
+		subs	r2, r2, #4
+		blt	8f
+		ands	ip, r0, #3
+	PLD(	pld	[r1, #0]		)
+		bne	9f
+		ands	ip, r1, #3
+		bne	10f
+
+1:		subs	r2, r2, #(28)
+		stmfd	sp!, {r5 - r8}
+		blt	5f
+
+	CALGN(	ands	ip, r0, #31		)
+	CALGN(	rsb	r3, ip, #32		)
+	CALGN(	sbcsne	r4, r3, r2		)  @ C is always set here
+	CALGN(	bcs	2f			)
+	CALGN(	adr	r4, 6f			)
+	CALGN(	subs	r2, r2, r3		)  @ C gets set
+	CALGN(	add	pc, r4, ip		)
+
+	PLD(	pld	[r1, #0]		)
+2:	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #28]		)
+	PLD(	blt	4f			)
+	PLD(	pld	[r1, #60]		)
+	PLD(	pld	[r1, #92]		)
+
+3:	PLD(	pld	[r1, #124]		)
+4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		subs	r2, r2, #32
+		str8w	r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		bge	3b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	4b			)
+
+5:		ands	ip, r2, #28
+		rsb	ip, ip, #32
+#if LDR1W_SHIFT > 0
+		lsl	ip, ip, #LDR1W_SHIFT
+#endif
+		addne	pc, pc, ip		@ C is always clear here
+		b	7f
+6:
+		.rept	(1 << LDR1W_SHIFT)
+		W(nop)
+		.endr
+		ldr1w	r1, r3, abort=20f
+		ldr1w	r1, r4, abort=20f
+		ldr1w	r1, r5, abort=20f
+		ldr1w	r1, r6, abort=20f
+		ldr1w	r1, r7, abort=20f
+		ldr1w	r1, r8, abort=20f
+		ldr1w	r1, lr, abort=20f
+
+#if LDR1W_SHIFT < STR1W_SHIFT
+		lsl	ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+		lsr	ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
+		add	pc, pc, ip
+		nop
+		.rept	(1 << STR1W_SHIFT)
+		W(nop)
+		.endr
+		str1w	r0, r3, abort=20f
+		str1w	r0, r4, abort=20f
+		str1w	r0, r5, abort=20f
+		str1w	r0, r6, abort=20f
+		str1w	r0, r7, abort=20f
+		str1w	r0, r8, abort=20f
+		str1w	r0, lr, abort=20f
+
+	CALGN(	bcs	2b			)
+
+7:		ldmfd	sp!, {r5 - r8}
+
+8:		movs	r2, r2, lsl #31
+		ldr1b	r1, r3, ne, abort=21f
+		ldr1b	r1, r4, cs, abort=21f
+		ldr1b	r1, ip, cs, abort=21f
+		str1b	r0, r3, ne, abort=21f
+		str1b	r0, r4, cs, abort=21f
+		str1b	r0, ip, cs, abort=21f
+
+		exit	r4, lr
+		bx	lr
+
+9:		rsb	ip, ip, #4
+		cmp	ip, #2
+		ldr1b	r1, r3, gt, abort=21f
+		ldr1b	r1, r4, ge, abort=21f
+		ldr1b	r1, lr, abort=21f
+		str1b	r0, r3, gt, abort=21f
+		str1b	r0, r4, ge, abort=21f
+		subs	r2, r2, ip
+		str1b	r0, lr, abort=21f
+		blt	8b
+		ands	ip, r1, #3
+		beq	1b
+
+10:		bic	r1, r1, #3
+		cmp	ip, #2
+		ldr1w	r1, lr, abort=21f
+		beq	17f
+		bgt	18f
+
+
+		.macro	forward_copy_shift pull push
+
+		subs	r2, r2, #28
+		blt	14f
+
+	CALGN(	ands	ip, r0, #31		)
+	CALGN(	rsb	ip, ip, #32		)
+	CALGN(	sbcsne	r4, ip, r2		)  @ C is always set here
+	CALGN(	subcc	r2, r2, ip		)
+	CALGN(	bcc	15f			)
+
+11:		stmfd	sp!, {r5 - r9}
+
+	PLD(	pld	[r1, #0]		)
+	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #28]		)
+	PLD(	blt	13f			)
+	PLD(	pld	[r1, #60]		)
+	PLD(	pld	[r1, #92]		)
+
+12:	PLD(	pld	[r1, #124]		)
+13:		ldr4w	r1, r4, r5, r6, r7, abort=19f
+		mov	r3, lr, lspull #\pull
+		subs	r2, r2, #32
+		ldr4w	r1, r8, r9, ip, lr, abort=19f
+		orr	r3, r3, r4, lspush #\push
+		mov	r4, r4, lspull #\pull
+		orr	r4, r4, r5, lspush #\push
+		mov	r5, r5, lspull #\pull
+		orr	r5, r5, r6, lspush #\push
+		mov	r6, r6, lspull #\pull
+		orr	r6, r6, r7, lspush #\push
+		mov	r7, r7, lspull #\pull
+		orr	r7, r7, r8, lspush #\push
+		mov	r8, r8, lspull #\pull
+		orr	r8, r8, r9, lspush #\push
+		mov	r9, r9, lspull #\pull
+		orr	r9, r9, ip, lspush #\push
+		mov	ip, ip, lspull #\pull
+		orr	ip, ip, lr, lspush #\push
+		str8w	r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f
+		bge	12b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	13b			)
+
+		ldmfd	sp!, {r5 - r9}
+
+14:		ands	ip, r2, #28
+		beq	16f
+
+15:		mov	r3, lr, lspull #\pull
+		ldr1w	r1, lr, abort=21f
+		subs	ip, ip, #4
+		orr	r3, r3, lr, lspush #\push
+		str1w	r0, r3, abort=21f
+		bgt	15b
+	CALGN(	cmp	r2, #0			)
+	CALGN(	bge	11b			)
+
+16:		sub	r1, r1, #(\push / 8)
+		b	8b
+
+		.endm
+
+
+		forward_copy_shift	pull=8	push=24
+
+17:		forward_copy_shift	pull=16	push=16
+
+18:		forward_copy_shift	pull=24	push=8
+
+
+/*
+ * Abort preamble and completion macros.
+ * If a fixup handler is required then those macros must surround it.
+ * It is assumed that the fixup code will handle the private part of
+ * the exit macro.
+ */
+
+	.macro	copy_abort_preamble
+19:	ldmfd	sp!, {r5 - r9}
+	b	21f
+20:	ldmfd	sp!, {r5 - r8}
+21:
+	.endm
+
+	.macro	copy_abort_end
+	ldmfd	sp!, {r4, lr}
+	bx	lr
+	.endm
+
+ENDPROC(memcpy)
diff --git a/roms/u-boot/arch/arm/lib/memset.S b/roms/u-boot/arch/arm/lib/memset.S
new file mode 100644
index 000000000..2277d1202
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/memset.S
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  linux/arch/arm/lib/memset.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ *  ASM optimised string functions
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.text
+	.align	5
+
+	.syntax unified
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD) && !defined(MEMSET_NO_THUMB_BUILD)
+	.thumb
+	.thumb_func
+#endif
+ENTRY(memset)
+	ands	r3, r0, #3		@ 1 unaligned?
+	mov	ip, r0			@ preserve r0 as return value
+	bne	6f			@ 1
+/*
+ * we know that the pointer in ip is aligned to a word boundary.
+ */
+1:	orr	r1, r1, r1, lsl #8
+	orr	r1, r1, r1, lsl #16
+	mov	r3, r1
+	cmp	r2, #16
+	blt	4f
+
+#if ! CALGN(1)+0
+
+/*
+ * We need 2 extra registers for this loop - use r8 and the LR
+ */
+	stmfd	sp!, {r8, lr}
+	mov	r8, r1
+	mov	lr, r1
+
+2:	subs	r2, r2, #64
+	stmiage	ip!, {r1, r3, r8, lr}	@ 64 bytes at a time.
+	stmiage	ip!, {r1, r3, r8, lr}
+	stmiage	ip!, {r1, r3, r8, lr}
+	stmiage	ip!, {r1, r3, r8, lr}
+	bgt	2b
+	ldmfdeq	sp!, {r8, pc}		@ Now <64 bytes to go.
+/*
+ * No need to correct the count; we're only testing bits from now on
+ */
+	tst	r2, #32
+	stmiane	ip!, {r1, r3, r8, lr}
+	stmiane	ip!, {r1, r3, r8, lr}
+	tst	r2, #16
+	stmiane	ip!, {r1, r3, r8, lr}
+	ldmfd	sp!, {r8, lr}
+
+#else
+
+/*
+ * This version aligns the destination pointer in order to write
+ * whole cache lines at once.
+ */
+
+	stmfd	sp!, {r4-r8, lr}
+	mov	r4, r1
+	mov	r5, r1
+	mov	r6, r1
+	mov	r7, r1
+	mov	r8, r1
+	mov	lr, r1
+
+	cmp	r2, #96
+	tstgt	ip, #31
+	ble	3f
+
+	and	r8, ip, #31
+	rsb	r8, r8, #32
+	sub	r2, r2, r8
+	movs	r8, r8, lsl #(32 - 4)
+	stmiacs	ip!, {r4, r5, r6, r7}
+	stmiami	ip!, {r4, r5}
+	tst	r8, #(1 << 30)
+	mov	r8, r1
+	strne	r1, [ip], #4
+
+3:	subs	r2, r2, #64
+	stmiage	ip!, {r1, r3-r8, lr}
+	stmiage	ip!, {r1, r3-r8, lr}
+	bgt	3b
+	ldmfdeq	sp!, {r4-r8, pc}
+
+	tst	r2, #32
+	stmiane	ip!, {r1, r3-r8, lr}
+	tst	r2, #16
+	stmiane	ip!, {r4-r7}
+	ldmfd	sp!, {r4-r8, lr}
+
+#endif
+
+4:	tst	r2, #8
+	stmiane	ip!, {r1, r3}
+	tst	r2, #4
+	strne	r1, [ip], #4
+/*
+ * When we get here, we've got less than 4 bytes to zero.  We
+ * may have an unaligned pointer as well.
+ */
+5:	tst	r2, #2
+	strbne	r1, [ip], #1
+	strbne	r1, [ip], #1
+	tst	r2, #1
+	strbne	r1, [ip], #1
+	ret	lr
+
+6:	subs	r2, r2, #4		@ 1 do we have enough
+	blt	5b			@ 1 bytes to align with?
+	cmp	r3, #2			@ 1
+	strblt	r1, [ip], #1		@ 1
+	strble	r1, [ip], #1		@ 1
+	strb	r1, [ip], #1		@ 1
+	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
+	b	1b
+ENDPROC(memset)
diff --git a/roms/u-boot/arch/arm/lib/muldi3.S b/roms/u-boot/arch/arm/lib/muldi3.S
new file mode 100644
index 000000000..e6c918119
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/muldi3.S
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  linux/arch/arm/lib/muldi3.S
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Oct 19, 2005
+ *  Copyright:  Monta Vista Software, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
+#else
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
+#endif
+
+.pushsection .text.__muldi3, "ax"
+ENTRY(__muldi3)
+ENTRY(__aeabi_lmul)
+
+	mul	xh, yl, xh
+	mla	xh, xl, yh, xh
+	mov	ip, xl, lsr #16
+	mov	yh, yl, lsr #16
+	bic	xl, xl, ip, lsl #16
+	bic	yl, yl, yh, lsl #16
+	mla	xh, yh, ip, xh
+	mul	yh, xl, yh
+	mul	xl, yl, xl
+	mul	ip, yl, ip
+	adds	xl, xl, yh, lsl #16
+	adc	xh, xh, yh, lsr #16
+	adds	xl, xl, ip, lsl #16
+	adc	xh, xh, ip, lsr #16
+	ret	lr
+
+ENDPROC(__muldi3)
+ENDPROC(__aeabi_lmul)
+.popsection
diff --git a/roms/u-boot/arch/arm/lib/psci-dt.c b/roms/u-boot/arch/arm/lib/psci-dt.c
new file mode 100644
index 000000000..903b33570
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/psci-dt.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 NXP Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/cache.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#include <linux/sizes.h>
+#include <linux/kernel.h>
+#include <asm/psci.h>
+#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT)
+#include <asm/armv8/sec_firmware.h>
+#endif
+
+int fdt_psci(void *fdt)
+{
+#if defined(CONFIG_ARMV7_PSCI) || defined(CONFIG_ARMV8_PSCI) || \
+	defined(CONFIG_SEC_FIRMWARE_ARMV8_PSCI)
+	int nodeoff;
+	unsigned int psci_ver = 0;
+	int tmp;
+
+	nodeoff = fdt_path_offset(fdt, "/cpus");
+	if (nodeoff < 0) {
+		printf("couldn't find /cpus\n");
+		return nodeoff;
+	}
+
+	/* add 'enable-method = "psci"' to each cpu node */
+	for (tmp = fdt_first_subnode(fdt, nodeoff);
+	     tmp >= 0;
+	     tmp = fdt_next_subnode(fdt, tmp)) {
+		const struct fdt_property *prop;
+		int len;
+
+		prop = fdt_get_property(fdt, tmp, "device_type", &len);
+		if (!prop)
+			continue;
+		if (len < 4)
+			continue;
+		if (strcmp(prop->data, "cpu"))
+			continue;
+
+		/*
+		 * Not checking rv here, our approach is to skip over errors in
+		 * individual cpu nodes, hopefully some of the nodes are
+		 * processed correctly and those will boot
+		 */
+		fdt_setprop_string(fdt, tmp, "enable-method", "psci");
+	}
+
+	nodeoff = fdt_path_offset(fdt, "/psci");
+	if (nodeoff >= 0)
+		goto init_psci_node;
+
+	nodeoff = fdt_path_offset(fdt, "/");
+	if (nodeoff < 0)
+		return nodeoff;
+
+	nodeoff = fdt_add_subnode(fdt, nodeoff, "psci");
+	if (nodeoff < 0)
+		return nodeoff;
+
+init_psci_node:
+#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT)
+	psci_ver = sec_firmware_support_psci_version();
+#elif defined(CONFIG_ARMV7_PSCI_1_0) || defined(CONFIG_ARMV8_PSCI)
+	psci_ver = ARM_PSCI_VER_1_0;
+#elif defined(CONFIG_ARMV7_PSCI_0_2)
+	psci_ver = ARM_PSCI_VER_0_2;
+#endif
+	if (psci_ver >= ARM_PSCI_VER_1_0) {
+		tmp = fdt_setprop_string(fdt, nodeoff,
+				"compatible", "arm,psci-1.0");
+		if (tmp)
+			return tmp;
+	}
+
+	if (psci_ver >= ARM_PSCI_VER_0_2) {
+		tmp = fdt_appendprop_string(fdt, nodeoff,
+				"compatible", "arm,psci-0.2");
+		if (tmp)
+			return tmp;
+	}
+
+#if !CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT)
+	/*
+	 * The Secure firmware framework isn't able to support PSCI version 0.1.
+	 */
+	if (psci_ver < ARM_PSCI_VER_0_2) {
+		tmp = fdt_appendprop_string(fdt, nodeoff,
+				"compatible", "arm,psci");
+		if (tmp)
+			return tmp;
+		tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_suspend",
+				ARM_PSCI_FN_CPU_SUSPEND);
+		if (tmp)
+			return tmp;
+		tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_off",
+				ARM_PSCI_FN_CPU_OFF);
+		if (tmp)
+			return tmp;
+		tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_on",
+				ARM_PSCI_FN_CPU_ON);
+		if (tmp)
+			return tmp;
+		tmp = fdt_setprop_u32(fdt, nodeoff, "migrate",
+				ARM_PSCI_FN_MIGRATE);
+		if (tmp)
+			return tmp;
+	}
+#endif
+
+	tmp = fdt_setprop_string(fdt, nodeoff, "method", "smc");
+	if (tmp)
+		return tmp;
+
+	tmp = fdt_setprop_string(fdt, nodeoff, "status", "okay");
+	if (tmp)
+		return tmp;
+
+#endif
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/lib/reloc_aarch64_efi.c b/roms/u-boot/arch/arm/lib/reloc_aarch64_efi.c
new file mode 100644
index 000000000..1aa57dbc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/reloc_aarch64_efi.c
@@ -0,0 +1,86 @@
+/* reloc_aarch64.c - position independent x86 ELF shared object relocator
+   Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+   Copyright (C) 1999 Hewlett-Packard Co.
+	Contributed by David Mosberger <davidm@hpl.hp.com>.
+
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above
+      copyright notice, this list of conditions and the following
+      disclaimer in the documentation and/or other materials
+      provided with the distribution.
+    * Neither the name of Hewlett-Packard Co. nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+    CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+    BE LIABLE FOR ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+    PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+    PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+    THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+    SUCH DAMAGE.
+*/
+
+#include <efi.h>
+
+#include <elf.h>
+
+efi_status_t EFIAPI _relocate(long ldbase, Elf64_Dyn *dyn)
+{
+	long relsz = 0, relent = 0;
+	Elf64_Rela *rel = 0;
+	unsigned long *addr;
+	int i;
+
+	for (i = 0; dyn[i].d_tag != DT_NULL; ++i) {
+		switch (dyn[i].d_tag) {
+		case DT_RELA:
+			rel = (Elf64_Rela *)((ulong)dyn[i].d_un.d_ptr + ldbase);
+			break;
+		case DT_RELASZ:
+			relsz = dyn[i].d_un.d_val;
+			break;
+		case DT_RELAENT:
+			relent = dyn[i].d_un.d_val;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (!rel && relent == 0)
+		return EFI_SUCCESS;
+
+	if (!rel || relent == 0)
+		return EFI_LOAD_ERROR;
+
+	while (relsz > 0) {
+		/* apply the relocs */
+		switch (ELF64_R_TYPE(rel->r_info)) {
+		case R_AARCH64_NONE:
+			break;
+		case R_AARCH64_RELATIVE:
+			addr = (ulong *)(ldbase + rel->r_offset);
+			*addr = ldbase + rel->r_addend;
+			break;
+		default:
+			break;
+		}
+		rel = (Elf64_Rela *)((char *)rel + relent);
+		relsz -= relent;
+	}
+	return EFI_SUCCESS;
+}
diff --git a/roms/u-boot/arch/arm/lib/reloc_arm_efi.c b/roms/u-boot/arch/arm/lib/reloc_arm_efi.c
new file mode 100644
index 000000000..9103c035c
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/reloc_arm_efi.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * reloc_arm.c - position-independent ARM ELF shared object relocator
+ *
+ * Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Contributed by David Mosberger <davidm@hpl.hp.com>.
+ *
+ * All rights reserved.
+ *
+ * This file is taken and modified from the gnu-efi project.
+ */
+
+#include <efi.h>
+#include <elf.h>
+
+efi_status_t EFIAPI _relocate(long ldbase, Elf32_Dyn *dyn)
+{
+	long relsz = 0, relent = 0;
+	Elf32_Rel *rel = 0;
+	ulong *addr;
+	int i;
+
+	for (i = 0; dyn[i].d_tag != DT_NULL; ++i) {
+		switch (dyn[i].d_tag) {
+		case DT_REL:
+			rel = (Elf32_Rel *)((ulong)dyn[i].d_un.d_ptr
+					+ ldbase);
+			break;
+		case DT_RELSZ:
+			relsz = dyn[i].d_un.d_val;
+			break;
+		case DT_RELENT:
+			relent = dyn[i].d_un.d_val;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (!rel && relent == 0)
+		return EFI_SUCCESS;
+
+	if (!rel || relent == 0)
+		return EFI_LOAD_ERROR;
+
+	while (relsz > 0) {
+		/* apply the relocs */
+		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_ARM_NONE:
+			break;
+		case R_ARM_RELATIVE:
+			addr = (ulong *)(ldbase + rel->r_offset);
+			*addr += ldbase;
+			break;
+		default:
+			break;
+		}
+		rel = (Elf32_Rel *)((char *)rel + relent);
+		relsz -= relent;
+	}
+
+	return EFI_SUCCESS;
+}
diff --git a/roms/u-boot/arch/arm/lib/relocate.S b/roms/u-boot/arch/arm/lib/relocate.S
new file mode 100644
index 000000000..e5f7267be
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/relocate.S
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  relocate - common relocation function for ARM U-Boot
+ *
+ *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+
+#include <asm-offsets.h>
+#include <asm/assembler.h>
+#include <config.h>
+#include <elf.h>
+#include <linux/linkage.h>
+#ifdef CONFIG_CPU_V7M
+#include <asm/armv7m.h>
+#endif
+
+/*
+ * Default/weak exception vectors relocation routine
+ *
+ * This routine covers the standard ARM cases: normal (0x00000000),
+ * high (0xffff0000) and VBAR. SoCs which do not comply with any of
+ * the standard cases must provide their own, strong, version.
+ */
+
+	.section	.text.relocate_vectors,"ax",%progbits
+	.weak		relocate_vectors
+
+ENTRY(relocate_vectors)
+
+#ifdef CONFIG_CPU_V7M
+	/*
+	 * On ARMv7-M we only have to write the new vector address
+	 * to VTOR register.
+	 */
+	ldr	r0, [r9, #GD_RELOCADDR]	/* r0 = gd->relocaddr */
+	ldr	r1, =V7M_SCB_BASE
+	str	r0, [r1, V7M_SCB_VTOR]
+#else
+#ifdef CONFIG_HAS_VBAR
+	/*
+	 * If the ARM processor has the security extensions,
+	 * use VBAR to relocate the exception vectors.
+	 */
+	ldr	r0, [r9, #GD_RELOCADDR]	/* r0 = gd->relocaddr */
+	mcr     p15, 0, r0, c12, c0, 0  /* Set VBAR */
+#else
+	/*
+	 * Copy the relocated exception vectors to the
+	 * correct address
+	 * CP15 c1 V bit gives us the location of the vectors:
+	 * 0x00000000 or 0xFFFF0000.
+	 */
+	ldr	r0, [r9, #GD_RELOCADDR]	/* r0 = gd->relocaddr */
+	mrc	p15, 0, r2, c1, c0, 0	/* V bit (bit[13]) in CP15 c1 */
+	ands	r2, r2, #(1 << 13)
+	ldreq	r1, =0x00000000		/* If V=0 */
+	ldrne	r1, =0xFFFF0000		/* If V=1 */
+	ldmia	r0!, {r2-r8,r10}
+	stmia	r1!, {r2-r8,r10}
+	ldmia	r0!, {r2-r8,r10}
+	stmia	r1!, {r2-r8,r10}
+#endif
+#endif
+	bx	lr
+
+ENDPROC(relocate_vectors)
+
+/*
+ * void relocate_code(addr_moni)
+ *
+ * This function relocates the monitor code.
+ *
+ * NOTE:
+ * To prevent the code below from containing references with an R_ARM_ABS32
+ * relocation record type, we never refer to linker-defined symbols directly.
+ * Instead, we declare literals which contain their relative location with
+ * respect to relocate_code, and at run time, add relocate_code back to them.
+ */
+
+ENTRY(relocate_code)
+	ldr	r1, =__image_copy_start	/* r1 <- SRC &__image_copy_start */
+	subs	r4, r0, r1		/* r4 <- relocation offset */
+	beq	relocate_done		/* skip relocation */
+	ldr	r2, =__image_copy_end	/* r2 <- SRC &__image_copy_end */
+
+copy_loop:
+	ldmia	r1!, {r10-r11}		/* copy from source address [r1]    */
+	stmia	r0!, {r10-r11}		/* copy to   target address [r0]    */
+	cmp	r1, r2			/* until source end address [r2]    */
+	blo	copy_loop
+
+	/*
+	 * fix .rel.dyn relocations
+	 */
+	ldr	r2, =__rel_dyn_start	/* r2 <- SRC &__rel_dyn_start */
+	ldr	r3, =__rel_dyn_end	/* r3 <- SRC &__rel_dyn_end */
+fixloop:
+	ldmia	r2!, {r0-r1}		/* (r0,r1) <- (SRC location,fixup) */
+	and	r1, r1, #0xff
+	cmp	r1, #R_ARM_RELATIVE
+	bne	fixnext
+
+	/* relative fix: increase location by offset */
+	add	r0, r0, r4
+	ldr	r1, [r0]
+	add	r1, r1, r4
+	str	r1, [r0]
+fixnext:
+	cmp	r2, r3
+	blo	fixloop
+
+relocate_done:
+
+#ifdef __XSCALE__
+	/*
+	 * On xscale, icache must be invalidated and write buffers drained,
+	 * even with cache disabled - 4.2.7 of xscale core developer's manual
+	 */
+	mcr	p15, 0, r0, c7, c7, 0	/* invalidate icache */
+	mcr	p15, 0, r0, c7, c10, 4	/* drain write buffer */
+#endif
+
+	/* ARMv4- don't know bx lr but the assembler fails to see that */
+
+#ifdef __ARM_ARCH_4__
+	mov	pc, lr
+#else
+	bx	lr
+#endif
+
+ENDPROC(relocate_code)
diff --git a/roms/u-boot/arch/arm/lib/relocate_64.S b/roms/u-boot/arch/arm/lib/relocate_64.S
new file mode 100644
index 000000000..72e91f270
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/relocate_64.S
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * relocate - common relocation function for AArch64 U-Boot
+ *
+ * (C) Copyright 2013
+ * Albert ARIBAUD <albert.u.boot@aribaud.net>
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <elf.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+/*
+ * void relocate_code(addr_moni)
+ *
+ * This function relocates the monitor code.
+ * x0 holds the destination address.
+ */
+ENTRY(relocate_code)
+	stp	x29, x30, [sp, #-32]!	/* create a stack frame */
+	mov	x29, sp
+	str	x0, [sp, #16]
+	/*
+	 * Copy u-boot from flash to RAM
+	 */
+	adrp	x1, __image_copy_start		/* x1 <- address bits [31:12] */
+	add	x1, x1, :lo12:__image_copy_start/* x1 <- address bits [11:00] */
+	subs	x9, x0, x1			/* x9 <- Run to copy offset */
+	b.eq	relocate_done			/* skip relocation */
+	/*
+	 * Don't ldr x1, __image_copy_start here, since if the code is already
+	 * running at an address other than it was linked to, that instruction
+	 * will load the relocated value of __image_copy_start. To
+	 * correctly apply relocations, we need to know the linked value.
+	 *
+	 * Linked &__image_copy_start, which we know was at
+	 * CONFIG_SYS_TEXT_BASE, which is stored in _TEXT_BASE, as a non-
+	 * relocated value, since it isn't a symbol reference.
+	 */
+	ldr	x1, _TEXT_BASE		/* x1 <- Linked &__image_copy_start */
+	subs	x9, x0, x1		/* x9 <- Link to copy offset */
+
+	adrp	x1, __image_copy_start		/* x1 <- address bits [31:12] */
+	add	x1, x1, :lo12:__image_copy_start/* x1 <- address bits [11:00] */
+	adrp	x2, __image_copy_end		/* x2 <- address bits [31:12] */
+	add	x2, x2, :lo12:__image_copy_end	/* x2 <- address bits [11:00] */
+copy_loop:
+	ldp	x10, x11, [x1], #16	/* copy from source address [x1] */
+	stp	x10, x11, [x0], #16	/* copy to   target address [x0] */
+	cmp	x1, x2			/* until source end address [x2] */
+	b.lo	copy_loop
+	str	x0, [sp, #24]
+
+	/*
+	 * Fix .rela.dyn relocations
+	 */
+	adrp	x2, __rel_dyn_start		/* x2 <- address bits [31:12] */
+	add	x2, x2, :lo12:__rel_dyn_start	/* x2 <- address bits [11:00] */
+	adrp	x3, __rel_dyn_end		/* x3 <- address bits [31:12] */
+	add	x3, x3, :lo12:__rel_dyn_end	/* x3 <- address bits [11:00] */
+fixloop:
+	ldp	x0, x1, [x2], #16	/* (x0,x1) <- (SRC location, fixup) */
+	ldr	x4, [x2], #8		/* x4 <- addend */
+	and	x1, x1, #0xffffffff
+	cmp	x1, #R_AARCH64_RELATIVE
+	bne	fixnext
+
+	/* relative fix: store addend plus offset at dest location */
+	add	x0, x0, x9
+	add	x4, x4, x9
+	str	x4, [x0]
+fixnext:
+	cmp	x2, x3
+	b.lo	fixloop
+
+relocate_done:
+	switch_el x1, 3f, 2f, 1f
+	bl	hang
+3:	mrs	x0, sctlr_el3
+	b	0f
+2:	mrs	x0, sctlr_el2
+	b	0f
+1:	mrs	x0, sctlr_el1
+0:	tbz	w0, #2, 5f	/* skip flushing cache if disabled */
+	tbz	w0, #12, 4f	/* skip invalidating i-cache if disabled */
+	ic	iallu		/* i-cache invalidate all */
+	isb	sy
+4:	ldp	x0, x1, [sp, #16]
+	bl	__asm_flush_dcache_range
+	bl     __asm_flush_l3_dcache
+5:	ldp	x29, x30, [sp],#32
+	ret
+ENDPROC(relocate_code)
diff --git a/roms/u-boot/arch/arm/lib/reset.c b/roms/u-boot/arch/arm/lib/reset.c
new file mode 100644
index 000000000..95169bae1
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/reset.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * (C) Copyright 2004 Texas Insturments
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <linux/delay.h>
+
+__weak void reset_misc(void)
+{
+}
+
+int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	puts ("resetting ...\n");
+
+	mdelay(50);				/* wait 50 ms */
+
+	disable_interrupts();
+
+	reset_misc();
+	reset_cpu();
+
+	/*NOTREACHED*/
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/lib/sections.c b/roms/u-boot/arch/arm/lib/sections.c
new file mode 100644
index 000000000..857879711
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/sections.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ */
+#include <linux/compiler.h>
+
+/**
+ * These two symbols are declared in a C file so that the linker
+ * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one
+ * it would use if the symbols were defined in the linker file.
+ * Using only R_ARM_RELATIVE relocation ensures that references to
+ * the symbols are correct after as well as before relocation.
+ *
+ * We need a 0-byte-size type for these symbols, and the compiler
+ * does not allow defining objects of C type 'void'. Using an empty
+ * struct is allowed by the compiler, but causes gcc versions 4.4 and
+ * below to complain about aliasing. Therefore we use the next best
+ * thing: zero-sized arrays, which are both 0-byte-size and exempt from
+ * aliasing warnings.
+ */
+
+char __bss_start[0] __section(".__bss_start");
+char __bss_end[0] __section(".__bss_end");
+char __image_copy_start[0] __section(".__image_copy_start");
+char __image_copy_end[0] __section(".__image_copy_end");
+char __rel_dyn_start[0] __section(".__rel_dyn_start");
+char __rel_dyn_end[0] __section(".__rel_dyn_end");
+char __secure_start[0] __section(".__secure_start");
+char __secure_end[0] __section(".__secure_end");
+char __secure_stack_start[0] __section(".__secure_stack_start");
+char __secure_stack_end[0] __section(".__secure_stack_end");
+char __efi_runtime_start[0] __section(".__efi_runtime_start");
+char __efi_runtime_stop[0] __section(".__efi_runtime_stop");
+char __efi_runtime_rel_start[0] __section(".__efi_runtime_rel_start");
+char __efi_runtime_rel_stop[0] __section(".__efi_runtime_rel_stop");
+char _end[0] __section(".__end");
diff --git a/roms/u-boot/arch/arm/lib/semihosting.c b/roms/u-boot/arch/arm/lib/semihosting.c
new file mode 100644
index 000000000..904fddd6c
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/semihosting.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Broadcom Corporation
+ */
+
+/*
+ * Minimal semihosting implementation for reading files into memory. If more
+ * features like writing files or console output are required they can be
+ * added later. This code has been tested on arm64/aarch64 fastmodel only.
+ * An untested placeholder exists for armv7 architectures, but since they
+ * are commonly available in silicon now, fastmodel usage makes less sense
+ * for them.
+ */
+#include <common.h>
+#include <command.h>
+#include <env.h>
+#include <log.h>
+
+#define SYSOPEN		0x01
+#define SYSCLOSE	0x02
+#define SYSREAD		0x06
+#define SYSFLEN		0x0C
+
+#define MODE_READ	0x0
+#define MODE_READBIN	0x1
+
+/*
+ * Call the handler
+ */
+static noinline long smh_trap(unsigned int sysnum, void *addr)
+{
+	register long result asm("r0");
+#if defined(CONFIG_ARM64)
+	asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr));
+#elif defined(CONFIG_CPU_V7M)
+	asm volatile ("bkpt #0xAB" : "=r" (result) : "0"(sysnum), "r"(addr));
+#else
+	/* Note - untested placeholder */
+	asm volatile ("svc #0x123456" : "=r" (result) : "0"(sysnum), "r"(addr));
+#endif
+	return result;
+}
+
+/*
+ * Open a file on the host. Mode is "r" or "rb" currently. Returns a file
+ * descriptor or -1 on error.
+ */
+static long smh_open(const char *fname, char *modestr)
+{
+	long fd;
+	unsigned long mode;
+	struct smh_open_s {
+		const char *fname;
+		unsigned long mode;
+		size_t len;
+	} open;
+
+	debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr);
+
+	/* Check the file mode */
+	if (!(strcmp(modestr, "r"))) {
+		mode = MODE_READ;
+	} else if (!(strcmp(modestr, "rb"))) {
+		mode = MODE_READBIN;
+	} else {
+		printf("%s: ERROR mode \'%s\' not supported\n", __func__,
+		       modestr);
+		return -1;
+	}
+
+	open.fname = fname;
+	open.len = strlen(fname);
+	open.mode = mode;
+
+	/* Open the file on the host */
+	fd = smh_trap(SYSOPEN, &open);
+	if (fd == -1)
+		printf("%s: ERROR fd %ld for file \'%s\'\n", __func__, fd,
+		       fname);
+
+	return fd;
+}
+
+/*
+ * Read 'len' bytes of file into 'memp'. Returns 0 on success, else failure
+ */
+static long smh_read(long fd, void *memp, size_t len)
+{
+	long ret;
+	struct smh_read_s {
+		long fd;
+		void *memp;
+		size_t len;
+	} read;
+
+	debug("%s: fd %ld, memp %p, len %zu\n", __func__, fd, memp, len);
+
+	read.fd = fd;
+	read.memp = memp;
+	read.len = len;
+
+	ret = smh_trap(SYSREAD, &read);
+	if (ret < 0) {
+		/*
+		 * The ARM handler allows for returning partial lengths,
+		 * but in practice this never happens so rather than create
+		 * hard to maintain partial read loops and such, just fail
+		 * with an error message.
+		 */
+		printf("%s: ERROR ret %ld, fd %ld, len %zu memp %p\n",
+		       __func__, ret, fd, len, memp);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Close the file using the file descriptor
+ */
+static long smh_close(long fd)
+{
+	long ret;
+
+	debug("%s: fd %ld\n", __func__, fd);
+
+	ret = smh_trap(SYSCLOSE, &fd);
+	if (ret == -1)
+		printf("%s: ERROR fd %ld\n", __func__, fd);
+
+	return ret;
+}
+
+/*
+ * Get the file length from the file descriptor
+ */
+static long smh_len_fd(long fd)
+{
+	long ret;
+
+	debug("%s: fd %ld\n", __func__, fd);
+
+	ret = smh_trap(SYSFLEN, &fd);
+	if (ret == -1)
+		printf("%s: ERROR ret %ld, fd %ld\n", __func__, ret, fd);
+
+	return ret;
+}
+
+static int smh_load_file(const char * const name, ulong load_addr,
+			 ulong *end_addr)
+{
+	long fd;
+	long len;
+	long ret;
+
+	fd = smh_open(name, "rb");
+	if (fd == -1)
+		return -1;
+
+	len = smh_len_fd(fd);
+	if (len < 0) {
+		smh_close(fd);
+		return -1;
+	}
+
+	ret = smh_read(fd, (void *)load_addr, len);
+	smh_close(fd);
+
+	if (ret == 0) {
+		*end_addr = load_addr + len - 1;
+		printf("loaded file %s from %08lX to %08lX, %08lX bytes\n",
+		       name,
+		       load_addr,
+		       *end_addr,
+		       len);
+	} else {
+		printf("read failed\n");
+		return 0;
+	}
+
+	return 0;
+}
+
+static int do_smhload(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	if (argc == 3 || argc == 4) {
+		ulong load_addr;
+		ulong end_addr = 0;
+		int ret;
+		char end_str[64];
+
+		load_addr = simple_strtoul(argv[2], NULL, 16);
+		if (!load_addr)
+			return -1;
+
+		ret = smh_load_file(argv[1], load_addr, &end_addr);
+		if (ret < 0)
+			return CMD_RET_FAILURE;
+
+		/* Optionally save returned end to the environment */
+		if (argc == 4) {
+			sprintf(end_str, "0x%08lx", end_addr);
+			env_set(argv[3], end_str);
+		}
+	} else {
+		return CMD_RET_USAGE;
+	}
+	return 0;
+}
+
+U_BOOT_CMD(smhload, 4, 0, do_smhload, "load a file using semihosting",
+	   "<file> 0x<address> [end var]\n"
+	   "    - load a semihosted file to the address specified\n"
+	   "      if the optional [end var] is specified, the end\n"
+	   "      address of the file will be stored in this environment\n"
+	   "      variable.\n");
diff --git a/roms/u-boot/arch/arm/lib/setjmp.S b/roms/u-boot/arch/arm/lib/setjmp.S
new file mode 100644
index 000000000..176a1d531
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/setjmp.S
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <config.h>
+#include <asm/assembler.h>
+#include <linux/linkage.h>
+
+.pushsection .text.setjmp, "ax"
+ENTRY(setjmp)
+	/*
+	 * A subroutine must preserve the contents of the registers
+	 * r4-r8, r10, r11 (v1-v5, v7 and v8) and SP (and r9 in PCS
+	 * variants that designate r9 as v6).
+	 */
+	mov  ip, sp
+	stm  a1, {v1-v8, ip, lr}
+	mov  a1, #0
+	bx   lr
+ENDPROC(setjmp)
+.popsection
+
+.pushsection .text.longjmp, "ax"
+ENTRY(longjmp)
+	ldm  a1, {v1-v8, ip, lr}
+	mov  sp, ip
+	mov  a1, a2
+	/* If we were passed a return value of zero, return one instead */
+	cmp  a1, #0
+	bne  1f
+	mov  a1, #1
+1:
+	bx   lr
+ENDPROC(longjmp)
+.popsection
diff --git a/roms/u-boot/arch/arm/lib/setjmp_aarch64.S b/roms/u-boot/arch/arm/lib/setjmp_aarch64.S
new file mode 100644
index 000000000..1b8d000eb
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/setjmp_aarch64.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <config.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+.pushsection .text.setjmp, "ax"
+ENTRY(setjmp)
+	/* Preserve all callee-saved registers and the SP */
+	stp  x19, x20, [x0,#0]
+	stp  x21, x22, [x0,#16]
+	stp  x23, x24, [x0,#32]
+	stp  x25, x26, [x0,#48]
+	stp  x27, x28, [x0,#64]
+	stp  x29, x30, [x0,#80]
+	mov  x2, sp
+	str  x2, [x0, #96]
+	mov  x0, #0
+	ret
+ENDPROC(setjmp)
+.popsection
+
+.pushsection .text.longjmp, "ax"
+ENTRY(longjmp)
+	ldp  x19, x20, [x0,#0]
+	ldp  x21, x22, [x0,#16]
+	ldp  x23, x24, [x0,#32]
+	ldp  x25, x26, [x0,#48]
+	ldp  x27, x28, [x0,#64]
+	ldp  x29, x30, [x0,#80]
+	ldr  x2, [x0,#96]
+	mov  sp, x2
+	/* Move the return value in place, but return 1 if passed 0. */
+	adds x0, xzr, x1
+	csinc x0, x0, xzr, ne
+	ret
+ENDPROC(longjmp)
+.popsection
diff --git a/roms/u-boot/arch/arm/lib/spl.c b/roms/u-boot/arch/arm/lib/spl.c
new file mode 100644
index 000000000..8e2bdf353
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/spl.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Tom Rini <trini@ti.com>
+ */
+
+#include <common.h>
+#include <config.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <image.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <linux/compiler.h>
+#include <asm/mach-types.h>
+
+#ifndef CONFIG_SPL_DM
+/* Pointer to as well as the global data structure for SPL */
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * WARNING: This is going away very soon. Don't use it and don't submit
+ * pafches that rely on it. The global_data area is set up in crt0.S.
+ */
+gd_t gdata __section(".data");
+#endif
+
+/*
+ * In the context of SPL, board_init_f() prepares the hardware for execution
+ * from system RAM (DRAM, DDR...). As system RAM may not be available yet,
+ * board_init_f() must use the current GD to store any data which must be
+ * passed on to later stages. These data include the relocation destination,
+ * the future stack, and the future GD location. BSS is cleared after this
+ * function (and therefore must be accessible).
+ *
+ * We provide this version by default but mark it as __weak to allow for
+ * platforms to do this in their own way if needed. Please see the top
+ * level U-Boot README "Board Initialization Flow" section for info on what
+ * to put in this function.
+ */
+void __weak board_init_f(ulong dummy)
+{
+}
+
+/*
+ * This function jumps to an image with argument. Normally an FDT or ATAGS
+ * image.
+ */
+#ifdef CONFIG_SPL_OS_BOOT
+#ifdef CONFIG_ARM64
+void __noreturn jump_to_image_linux(struct spl_image_info *spl_image)
+{
+	debug("Entering kernel arg pointer: 0x%p\n", spl_image->arg);
+	cleanup_before_linux();
+	armv8_switch_to_el2((u64)spl_image->arg, 0, 0, 0,
+			    spl_image->entry_point, ES_TO_AARCH64);
+}
+#else
+void __noreturn jump_to_image_linux(struct spl_image_info *spl_image)
+{
+	unsigned long machid = 0xffffffff;
+#ifdef CONFIG_MACH_TYPE
+	machid = CONFIG_MACH_TYPE;
+#endif
+
+	debug("Entering kernel arg pointer: 0x%p\n", spl_image->arg);
+	typedef void (*image_entry_arg_t)(int, int, void *)
+		__attribute__ ((noreturn));
+	image_entry_arg_t image_entry =
+		(image_entry_arg_t)(uintptr_t) spl_image->entry_point;
+	cleanup_before_linux();
+	image_entry(0, machid, spl_image->arg);
+}
+#endif	/* CONFIG_ARM64 */
+#endif
diff --git a/roms/u-boot/arch/arm/lib/stack.c b/roms/u-boot/arch/arm/lib/stack.c
new file mode 100644
index 000000000..b03e1cfc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/stack.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2015 Andreas Bießmann <andreas@biessmann.org>
+ *
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2002-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ */
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int arch_reserve_stacks(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	gd->start_addr_sp -= 128;	/* leave 32 words for abort-stack */
+	gd->irq_sp = gd->start_addr_sp;
+#else
+	/* setup stack pointer for exceptions */
+	gd->irq_sp = gd->start_addr_sp;
+
+# if !defined(CONFIG_ARM64)
+	/* leave 3 words for abort-stack, plus 1 for alignment */
+	gd->start_addr_sp -= 16;
+# endif
+#endif
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/lib/uldivmod.S b/roms/u-boot/arch/arm/lib/uldivmod.S
new file mode 100644
index 000000000..5e9e136cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/uldivmod.S
@@ -0,0 +1,245 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2010, Google Inc.
+ *
+ * Brought in from coreboot uldivmod.S
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * A, Q = r0 + (r1 << 32)
+ * B, R = r2 + (r3 << 32)
+ * A / B = Q ... R
+ */
+
+A_0	.req	r0
+A_1	.req	r1
+B_0	.req	r2
+B_1	.req	r3
+C_0	.req	r4
+C_1	.req	r5
+D_0	.req	r6
+D_1	.req	r7
+
+Q_0	.req	r0
+Q_1	.req	r1
+R_0	.req	r2
+R_1	.req	r3
+
+THUMB(
+TMP	.req	r8
+)
+
+.pushsection .text.__aeabi_uldivmod, "ax"
+ENTRY(__aeabi_uldivmod)
+
+	stmfd	sp!, {r4, r5, r6, r7, THUMB(TMP,) lr}
+	@ Test if B == 0
+	orrs	ip, B_0, B_1		@ Z set -> B == 0
+	beq	L_div_by_0
+	@ Test if B is power of 2: (B & (B - 1)) == 0
+	subs	C_0, B_0, #1
+	sbc	C_1, B_1, #0
+	tst	C_0, B_0
+	tsteq	B_1, C_1
+	beq	L_pow2
+	@ Test if A_1 == B_1 == 0
+	orrs	ip, A_1, B_1
+	beq	L_div_32_32
+
+L_div_64_64:
+/* CLZ only exists in ARM architecture version 5 and above. */
+#ifdef HAVE_CLZ
+	mov	C_0, #1
+	mov	C_1, #0
+	@ D_0 = clz A
+	teq	A_1, #0
+	clz	D_0, A_1
+	clzeq	ip, A_0
+	addeq	D_0, D_0, ip
+	@ D_1 = clz B
+	teq	B_1, #0
+	clz	D_1, B_1
+	clzeq	ip, B_0
+	addeq	D_1, D_1, ip
+	@ if clz B - clz A > 0
+	subs	D_0, D_1, D_0
+	bls	L_done_shift
+	@ B <<= (clz B - clz A)
+	subs	D_1, D_0, #32
+	rsb	ip, D_0, #32
+	movmi	B_1, B_1, lsl D_0
+ARM(	orrmi	B_1, B_1, B_0, lsr ip	)
+THUMB(	lsrmi	TMP, B_0, ip		)
+THUMB(	orrmi	B_1, B_1, TMP		)
+	movpl	B_1, B_0, lsl D_1
+	mov	B_0, B_0, lsl D_0
+	@ C = 1 << (clz B - clz A)
+	movmi	C_1, C_1, lsl D_0
+ARM(	orrmi	C_1, C_1, C_0, lsr ip	)
+THUMB(	lsrmi	TMP, C_0, ip		)
+THUMB(	orrmi	C_1, C_1, TMP		)
+	movpl	C_1, C_0, lsl D_1
+	mov	C_0, C_0, lsl D_0
+L_done_shift:
+	mov	D_0, #0
+	mov	D_1, #0
+	@ C: current bit; D: result
+#else
+	@ C: current bit; D: result
+	mov	C_0, #1
+	mov	C_1, #0
+	mov	D_0, #0
+	mov	D_1, #0
+L_lsl_4:
+	cmp	B_1, #0x10000000
+	cmpcc	B_1, A_1
+	cmpeq	B_0, A_0
+	bcs	L_lsl_1
+	@ B <<= 4
+	mov	B_1, B_1, lsl #4
+	orr	B_1, B_1, B_0, lsr #28
+	mov	B_0, B_0, lsl #4
+	@ C <<= 4
+	mov	C_1, C_1, lsl #4
+	orr	C_1, C_1, C_0, lsr #28
+	mov	C_0, C_0, lsl #4
+	b	L_lsl_4
+L_lsl_1:
+	cmp	B_1, #0x80000000
+	cmpcc	B_1, A_1
+	cmpeq	B_0, A_0
+	bcs	L_subtract
+	@ B <<= 1
+	mov	B_1, B_1, lsl #1
+	orr	B_1, B_1, B_0, lsr #31
+	mov	B_0, B_0, lsl #1
+	@ C <<= 1
+	mov	C_1, C_1, lsl #1
+	orr	C_1, C_1, C_0, lsr #31
+	mov	C_0, C_0, lsl #1
+	b	L_lsl_1
+#endif
+L_subtract:
+	@ if A >= B
+	cmp	A_1, B_1
+	cmpeq	A_0, B_0
+	bcc	L_update
+	@ A -= B
+	subs	A_0, A_0, B_0
+	sbc	A_1, A_1, B_1
+	@ D |= C
+	orr	D_0, D_0, C_0
+	orr	D_1, D_1, C_1
+L_update:
+	@ if A == 0: break
+	orrs	ip, A_1, A_0
+	beq	L_exit
+	@ C >>= 1
+	movs	C_1, C_1, lsr #1
+	movs	C_0, C_0, rrx
+	@ if C == 0: break
+	orrs	ip, C_1, C_0
+	beq	L_exit
+	@ B >>= 1
+	movs	B_1, B_1, lsr #1
+	mov	B_0, B_0, rrx
+	b	L_subtract
+L_exit:
+	@ Note: A, B & Q, R are aliases
+	mov	R_0, A_0
+	mov	R_1, A_1
+	mov	Q_0, D_0
+	mov	Q_1, D_1
+	ldmfd	sp!, {r4, r5, r6, r7, THUMB(TMP,) pc}
+
+L_div_32_32:
+	@ Note:	A_0 &	r0 are aliases
+	@	Q_1	r1
+	mov	r1, B_0
+	bl	__aeabi_uidivmod
+	mov	R_0, r1
+	mov	R_1, #0
+	mov	Q_1, #0
+	ldmfd	sp!, {r4, r5, r6, r7, THUMB(TMP,) pc}
+
+L_pow2:
+#ifdef HAVE_CLZ
+	@ Note: A, B and Q, R are aliases
+	@ R = A & (B - 1)
+	and	C_0, A_0, C_0
+	and	C_1, A_1, C_1
+	@ Q = A >> log2(B)
+	@ Note: B must not be 0 here!
+	clz	D_0, B_0
+	add	D_1, D_0, #1
+	rsbs	D_0, D_0, #31
+	bpl	L_1
+	clz	D_0, B_1
+	rsb	D_0, D_0, #31
+	mov	A_0, A_1, lsr D_0
+	add	D_0, D_0, #32
+L_1:
+	movpl	A_0, A_0, lsr D_0
+ARM(	orrpl	A_0, A_0, A_1, lsl D_1	)
+THUMB(	lslpl	TMP, A_1, D_1		)
+THUMB(	orrpl	A_0, A_0, TMP		)
+	mov	A_1, A_1, lsr D_0
+	@ Mov back C to R
+	mov	R_0, C_0
+	mov	R_1, C_1
+	ldmfd	sp!, {r4, r5, r6, r7, THUMB(TMP,) pc}
+#else
+	@ Note: A, B and Q, R are aliases
+	@ R = A & (B - 1)
+	and	C_0, A_0, C_0
+	and	C_1, A_1, C_1
+	@ Q = A >> log2(B)
+	@ Note: B must not be 0 here!
+	@ Count the leading zeroes in B.
+	mov	D_0, #0
+	orrs	B_0, B_0, B_0
+	@ If B is greater than 1 << 31, divide A and B by 1 << 32.
+	moveq	A_0, A_1
+	moveq	A_1, #0
+	moveq	B_0, B_1
+	@ Count the remaining leading zeroes in B.
+	movs	B_1, B_0, lsl #16
+	addeq	D_0, #16
+	moveq	B_0, B_0, lsr #16
+	tst	B_0, #0xff
+	addeq	D_0, #8
+	moveq	B_0, B_0, lsr #8
+	tst	B_0, #0xf
+	addeq	D_0, #4
+	moveq	B_0, B_0, lsr #4
+	tst	B_0, #0x3
+	addeq	D_0, #2
+	moveq	B_0, B_0, lsr #2
+	tst	B_0, #0x1
+	addeq	D_0, #1
+	@ Shift A to the right by the appropriate amount.
+	rsb	D_1, D_0, #32
+	mov	Q_0, A_0, lsr D_0
+ ARM(   orr     Q_0, Q_0, A_1, lsl D_1	)
+ THUMB(	lsl	A_1, D_1		)
+ THUMB(	orr	Q_0, A_1		)
+	mov	Q_1, A_1, lsr D_0
+	@ Move C to R
+	mov	R_0, C_0
+	mov	R_1, C_1
+	ldmfd	sp!, {r4, r5, r6, r7, THUMB(TMP,) pc}
+#endif
+
+L_div_by_0:
+	bl	__div0
+	@ As wrong as it could be
+	mov	Q_0, #0
+	mov	Q_1, #0
+	mov	R_0, #0
+	mov	R_1, #0
+	ldmfd	sp!, {r4, r5, r6, r7, THUMB(TMP,) pc}
+ENDPROC(__aeabi_uldivmod)
+.popsection
diff --git a/roms/u-boot/arch/arm/lib/vectors.S b/roms/u-boot/arch/arm/lib/vectors.S
new file mode 100644
index 000000000..56f368155
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/vectors.S
@@ -0,0 +1,292 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  vectors - Generic ARM exception table code
+ *
+ *  Copyright (c) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (c) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (c) 2000	Wolfgang Denk <wd@denx.de>
+ *  Copyright (c) 2001	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2002	Kyle Harris <kharris@nexus-tech.net>
+ */
+
+#include <config.h>
+
+/*
+ * A macro to allow insertion of an ARM exception vector either
+ * for the non-boot0 case or by a boot0-header.
+ */
+        .macro ARM_VECTORS
+#ifdef CONFIG_ARCH_K3
+	ldr     pc, _reset
+#else
+	b	reset
+#endif
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+	.endm
+
+
+/*
+ *************************************************************************
+ *
+ * Symbol _start is referenced elsewhere, so make it global
+ *
+ *************************************************************************
+ */
+
+.globl _start
+
+/*
+ *************************************************************************
+ *
+ * Vectors have their own section so linker script can map them easily
+ *
+ *************************************************************************
+ */
+
+	.section ".vectors", "ax"
+
+#if defined(CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK)
+/*
+ * Various SoCs need something special and SoC-specific up front in
+ * order to boot, allow them to set that in their boot0.h file and then
+ * use it here.
+ *
+ * To allow a boot0 hook to insert a 'special' sequence after the vector
+ * table (e.g. for the socfpga), the presence of a boot0 hook supresses
+ * the below vector table and assumes that the vector table is filled in
+ * by the boot0 hook.  The requirements for a boot0 hook thus are:
+ *   (1) defines '_start:' as appropriate
+ *   (2) inserts the vector table using ARM_VECTORS as appropriate
+ */
+#include <asm/arch/boot0.h>
+#else
+
+/*
+ *************************************************************************
+ *
+ * Exception vectors as described in ARM reference manuals
+ *
+ * Uses indirect branch to allow reaching handlers anywhere in memory.
+ *
+ *************************************************************************
+ */
+
+_start:
+#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
+	.word	CONFIG_SYS_DV_NOR_BOOT_CFG
+#endif
+	ARM_VECTORS
+#endif /* !defined(CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK) */
+
+/*
+ *************************************************************************
+ *
+ * Indirect vectors table
+ *
+ * Symbols referenced here must be defined somewhere else
+ *
+ *************************************************************************
+ */
+
+	.globl  _reset
+	.globl	_undefined_instruction
+	.globl	_software_interrupt
+	.globl	_prefetch_abort
+	.globl	_data_abort
+	.globl	_not_used
+	.globl	_irq
+	.globl	_fiq
+
+#ifdef CONFIG_ARCH_K3
+_reset:			.word reset
+#endif
+_undefined_instruction:	.word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+
+	.balignl 16,0xdeadbeef
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+/* SPL interrupt handling: just hang */
+
+#ifdef CONFIG_SPL_BUILD
+
+	.align	5
+undefined_instruction:
+software_interrupt:
+prefetch_abort:
+data_abort:
+not_used:
+irq:
+fiq:
+1:
+	b	1b			/* hang and never return */
+
+#else	/* !CONFIG_SPL_BUILD */
+
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+#ifdef IRAM_BASE_ADDR
+	.word   IRAM_BASE_ADDR + 0x20
+#else
+	.word	0x0badc0de
+#endif
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	@ carve out a frame on current user stack
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
+	ldr	r2, IRQ_STACK_START_IN
+	@ get values for "aborted" pc and cpsr (into parm regs)
+	ldmia	r2, {r2 - r3}
+	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r3}	@ save sp_SVC, lr_SVC, pc, cpsr
+	mov	r0, sp		@ save current stack into r0 (param register)
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	@ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+	add	r8, sp, #S_PC
+	stmdb	r8, {sp, lr}^		@ Calling SP, LR
+	str	lr, [r8, #0]		@ Save calling PC
+	mrs	r6, spsr
+	str	r6, [r8, #4]		@ Save CPSR
+	str	r0, [r8, #8]		@ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4		@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
+
+	str	lr, [r13]	@ save caller lr in position 0 of saved stack
+	mrs	lr, spsr	@ get the spsr
+	str	lr, [r13, #4]	@ save spsr in position 1 of saved stack
+	mov	r13, #MODE_SVC	@ prepare SVC-Mode
+	@ msr	spsr_c, r13
+	msr	spsr, r13	@ switch modes, make sure moves will execute
+	mov	lr, pc		@ capture return pc
+	movs	pc, lr		@ jump to next instruction & switch modes.
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+/*
+ * exception handlers
+ */
+
+	.align  5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_not_used
+
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_fiq
+
+#endif	/* CONFIG_SPL_BUILD */
diff --git a/roms/u-boot/arch/arm/lib/vectors_m.S b/roms/u-boot/arch/arm/lib/vectors_m.S
new file mode 100644
index 000000000..7d2d55c7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/vectors_m.S
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ */
+
+#include <config.h>
+#include <asm/assembler.h>
+#include <linux/linkage.h>
+
+.type __hard_fault_entry, %function
+__hard_fault_entry:
+	mov	r0, sp	@ pass auto-saved registers as argument
+	b	do_hard_fault
+
+.type __mm_fault_entry, %function
+__mm_fault_entry:
+	mov	r0, sp	@ pass auto-saved registers as argument
+	b	do_mm_fault
+
+.type __bus_fault_entry, %function
+__bus_fault_entry:
+	mov	r0, sp	@ pass auto-saved registers as argument
+	b	do_bus_fault
+
+.type __usage_fault_entry, %function
+__usage_fault_entry:
+	mov	r0, sp	@ pass auto-saved registers as argument
+	b	do_usage_fault
+
+.type __invalid_entry, %function
+__invalid_entry:
+	mov	r0, sp	@ pass auto-saved registers as argument
+	b	do_invalid_entry
+
+   .section  .vectors
+ENTRY(_start)
+	.long	CONFIG_SYS_INIT_SP_ADDR		@ 0 - Reset stack pointer
+	.long	reset				@ 1 - Reset
+	.long	__invalid_entry			@ 2 - NMI
+	.long	__hard_fault_entry		@ 3 - HardFault
+	.long	__mm_fault_entry		@ 4 - MemManage
+	.long	__bus_fault_entry		@ 5 - BusFault
+	.long	__usage_fault_entry		@ 6 - UsageFault
+	.long	__invalid_entry			@ 7 - Reserved
+	.long	__invalid_entry			@ 8 - Reserved
+	.long	__invalid_entry			@ 9 - Reserved
+	.long	__invalid_entry			@ 10 - Reserved
+	.long	__invalid_entry			@ 11 - SVCall
+	.long	__invalid_entry			@ 12 - Debug Monitor
+	.long	__invalid_entry			@ 13 - Reserved
+	.long	__invalid_entry			@ 14 - PendSV
+	.long	__invalid_entry			@ 15 - SysTick
+	.rept	255 - 16
+	.long	__invalid_entry			@ 16..255 - External Interrupts
+	.endr
diff --git a/roms/u-boot/arch/arm/lib/zimage.c b/roms/u-boot/arch/arm/lib/zimage.c
new file mode 100644
index 000000000..45e9c4506
--- /dev/null
+++ b/roms/u-boot/arch/arm/lib/zimage.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016
+ * Ladislav Michl <ladis@linux-mips.org>
+ *
+ * bootz code:
+ * Copyright (C) 2012 Marek Vasut <marek.vasut@gmail.com>
+ */
+#include <common.h>
+#include <image.h>
+
+#define	LINUX_ARM_ZIMAGE_MAGIC	0x016f2818
+#define	BAREBOX_IMAGE_MAGIC	0x00786f62
+
+struct arm_z_header {
+	uint32_t	code[9];
+	uint32_t	zi_magic;
+	uint32_t	zi_start;
+	uint32_t	zi_end;
+} __attribute__ ((__packed__));
+
+int bootz_setup(ulong image, ulong *start, ulong *end)
+{
+	struct arm_z_header *zi = (struct arm_z_header *)image;
+
+	if (zi->zi_magic != LINUX_ARM_ZIMAGE_MAGIC &&
+	    zi->zi_magic != BAREBOX_IMAGE_MAGIC) {
+		if (!IS_ENABLED(CONFIG_SPL_BUILD))
+			puts("zimage: Bad magic!\n");
+		return 1;
+	}
+
+	*start = zi->zi_start;
+	*end = zi->zi_end;
+	if (!IS_ENABLED(CONFIG_SPL_BUILD))
+		printf("Kernel image @ %#08lx [ %#08lx - %#08lx ]\n",
+		       image, *start, *end);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-aspeed/Kconfig b/roms/u-boot/arch/arm/mach-aspeed/Kconfig
new file mode 100644
index 000000000..9a725f195
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/Kconfig
@@ -0,0 +1,43 @@
+if ARCH_ASPEED
+
+config SYS_ARCH
+	default "arm"
+
+config SYS_SOC
+	default "aspeed"
+
+config SYS_TEXT_BASE
+	default 0x00000000
+
+choice
+	prompt "Aspeed SoC select"
+	depends on ARCH_ASPEED
+	default ASPEED_AST2500
+
+config ASPEED_AST2500
+	bool "Support Aspeed AST2500 SoC"
+	depends on DM_RESET
+	select CPU_ARM1176
+	help
+	  The Aspeed AST2500 is a ARM-based SoC with arm1176 CPU.
+	  It is used as Board Management Controller on many server boards,
+	  which is enabled by support of LPC and eSPI peripherals.
+
+config ASPEED_AST2600
+	bool "Support Aspeed AST2600 SoC"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select SYS_ARCH_TIMER
+	select SUPPORT_SPL
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+	help
+	  The Aspeed AST2600 is a ARM-based SoC with Cortex-A7 CPU.
+	  It is used as Board Management Controller on many server boards,
+	  which is enabled by support of LPC and eSPI peripherals.
+
+endchoice
+
+source "arch/arm/mach-aspeed/ast2500/Kconfig"
+source "arch/arm/mach-aspeed/ast2600/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-aspeed/Makefile b/roms/u-boot/arch/arm/mach-aspeed/Makefile
new file mode 100644
index 000000000..42599c125
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2016 Google, Inc
+
+obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
+obj-$(CONFIG_ASPEED_AST2500) += ast2500/
+obj-$(CONFIG_ASPEED_AST2600) += ast2600/
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2500/Kconfig b/roms/u-boot/arch/arm/mach-aspeed/ast2500/Kconfig
new file mode 100644
index 000000000..b815153bf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2500/Kconfig
@@ -0,0 +1,16 @@
+if ASPEED_AST2500
+
+config SYS_CPU
+	default "arm1176"
+
+config TARGET_EVB_AST2500
+	bool "Evb-AST2500"
+	help
+	  Evb-AST2500 is Aspeed evaluation board for AST2500 chip.
+	  It has 512M of RAM, 32M of SPI flash, two Ethernet ports,
+	  4 Serial ports, 4 USB ports, VGA port, PCIe, SD card slot,
+	  20 pin JTAG, pinouts for 14 I2Cs, 3 SPIs and eSPI, 8 PWMs.
+
+source "board/aspeed/evb_ast2500/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2500/Makefile b/roms/u-boot/arch/arm/mach-aspeed/ast2500/Makefile
new file mode 100644
index 000000000..db70432ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2500/Makefile
@@ -0,0 +1,3 @@
+obj-y += lowlevel_init.o
+obj-y += board_common.o
+obj-y += clk_ast2500.o
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2500/board_common.c b/roms/u-boot/arch/arm/mach-aspeed/ast2500/board_common.c
new file mode 100644
index 000000000..aca200223
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2500/board_common.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2016 Google, Inc
+ */
+#include <common.h>
+#include <dm.h>
+#include <init.h>
+#include <log.h>
+#include <ram.h>
+#include <timer.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/wdt.h>
+#include <linux/err.h>
+#include <dm/uclass.h>
+
+/*
+ * Second Watchdog Timer by default is configured
+ * to trigger secondary boot source.
+ */
+#define AST_2ND_BOOT_WDT		1
+
+/*
+ * Third Watchdog Timer by default is configured
+ * to toggle Flash address mode switch before reset.
+ */
+#define AST_FLASH_ADDR_DETECT_WDT	2
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	struct udevice *dev;
+	struct ram_info ram;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM FAIL1\r\n");
+		return ret;
+	}
+
+	ret = ram_get_info(dev, &ram);
+	if (ret) {
+		debug("DRAM FAIL2\r\n");
+		return ret;
+	}
+
+	gd->ram_size = ram.size;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2500/clk_ast2500.c b/roms/u-boot/arch/arm/mach-aspeed/ast2500/clk_ast2500.c
new file mode 100644
index 000000000..02bd3f67c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2500/clk_ast2500.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Google, Inc
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/scu_ast2500.h>
+#include <linux/err.h>
+
+int ast_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(aspeed_ast2500_scu), devp);
+}
+
+void *ast_get_scu(void)
+{
+	struct ast2500_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = ast_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->scu;
+}
+
+void ast_scu_unlock(struct ast2500_scu *scu)
+{
+	writel(SCU_UNLOCK_VALUE, &scu->protection_key);
+	while (!readl(&scu->protection_key))
+		;
+}
+
+void ast_scu_lock(struct ast2500_scu *scu)
+{
+	writel(~SCU_UNLOCK_VALUE, &scu->protection_key);
+	while (readl(&scu->protection_key))
+		;
+}
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2500/lowlevel_init.S b/roms/u-boot/arch/arm/mach-aspeed/ast2500/lowlevel_init.S
new file mode 100644
index 000000000..9ec3dd46b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2500/lowlevel_init.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ */
+#include <asm/arch/scu_ast2500.h>
+
+/* registers for low level init */
+#define SCU_PROT_KEY		0x1e6e2000
+#define SCU_VGA_HANDSHAKE	0x1e6e2040
+#define SCU_HW_STRAP		0x1e6e2070
+#define SCU_HW_STRAP_CLR	0x1e6e207c
+#define WDT3_CTRL		0x1e78504c
+
+.global lowlevel_init
+lowlevel_init:
+
+	/* unlock SCU */
+	ldr	r0, =SCU_PROT_KEY
+	ldr	r1, =SCU_UNLOCK_VALUE
+	str	r1, [r0]
+
+	/* set BMC FW as DRAM initializer */
+	ldr	r0, =SCU_VGA_HANDSHAKE
+	ldr	r1, [r0]
+	orr	r1, #0x80
+	str	r1, [r0]
+
+	/* set PERST# as LPC reset source if eSPI mode is enabled*/
+	ldr	r0, =SCU_HW_STRAP
+	ldr	r1, [r0]
+	tst	r1, #(0x1 << 25)
+	ldrne	r0, =SCU_HW_STRAP_CLR
+	movne	r1, #(0x1 << 14)
+	strne	r1, [r0]
+
+	/* disable WDT3 for SPI 3/4 bytes auto-detection */
+	ldr	r0, =WDT3_CTRL
+	mov	r1, #0x0
+	str	r1, [r0]
+
+	mov	pc, lr
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2600/Kconfig b/roms/u-boot/arch/arm/mach-aspeed/ast2600/Kconfig
new file mode 100644
index 000000000..f3a53387a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2600/Kconfig
@@ -0,0 +1,17 @@
+if ASPEED_AST2600
+
+config SYS_CPU
+	default "armv7"
+
+config TARGET_EVB_AST2600
+	bool "EVB-AST2600"
+	depends on ASPEED_AST2600
+	help
+	  EVB-AST2600 is Aspeed evaluation board for AST2600A0 chip.
+	  It has 512M of RAM, 32M of SPI flash, two Ethernet ports,
+	  4 Serial ports, 4 USB ports, VGA port, PCIe, SD card slot,
+	  20 pin JTAG, pinouts for 14 I2Cs, 3 SPIs and eSPI, 8 PWMs.
+
+source "board/aspeed/evb_ast2600/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2600/Makefile b/roms/u-boot/arch/arm/mach-aspeed/ast2600/Makefile
new file mode 100644
index 000000000..448d3201a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2600/Makefile
@@ -0,0 +1,2 @@
+obj-y   += lowlevel_init.o board_common.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2600/board_common.c b/roms/u-boot/arch/arm/mach-aspeed/ast2600/board_common.c
new file mode 100644
index 000000000..82ff21908
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2600/board_common.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <timer.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <dm/uclass.h>
+#include <asm/arch/scu_ast2600.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Memory Control registers */
+#define MCR_BASE			0x1e6e0000
+#define MCR_CONF			(MCR_BASE + 0x004)
+
+/* bit fields of MCR_CONF */
+#define MCR_CONF_ECC_EN			BIT(7)
+#define MCR_CONF_VGA_MEMSZ_MASK		GENMASK(3, 2)
+#define MCR_CONF_VGA_MEMSZ_SHIFT	2
+#define MCR_CONF_MEMSZ_MASK		GENMASK(1, 0)
+#define MCR_CONF_MEMSZ_SHIFT		0
+
+int dram_init(void)
+{
+	int ret;
+	struct udevice *dev;
+	struct ram_info ram;
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("cannot get DRAM driver\n");
+		return ret;
+	}
+
+	ret = ram_get_info(dev, &ram);
+	if (ret) {
+		debug("cannot get DRAM information\n");
+		return ret;
+	}
+
+	gd->ram_size = ram.size;
+	return 0;
+}
+
+int board_init(void)
+{
+	int i = 0, rc;
+	struct udevice *dev;
+
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	while (1) {
+		rc = uclass_get_device(UCLASS_MISC, i++, &dev);
+		if (rc)
+			break;
+	}
+
+	return 0;
+}
+
+void board_add_ram_info(int use_default)
+{
+	int rc;
+	uint32_t conf;
+	uint32_t ecc, act_size, vga_rsvd;
+	struct udevice *scu_dev;
+	struct ast2600_scu *scu;
+
+	rc = uclass_get_device_by_driver(UCLASS_CLK,
+					 DM_DRIVER_GET(aspeed_ast2600_scu), &scu_dev);
+	if (rc) {
+		debug("%s: cannot find SCU device, rc=%d\n", __func__, rc);
+		return;
+	}
+
+	scu = devfdt_get_addr_ptr(scu_dev);
+	if (IS_ERR_OR_NULL(scu)) {
+		debug("%s: cannot get SCU address pointer\n", __func__);
+		return;
+	}
+
+	conf = readl(MCR_CONF);
+
+	ecc = conf & MCR_CONF_ECC_EN;
+	act_size = 0x100 << ((conf & MCR_CONF_MEMSZ_MASK) >> MCR_CONF_MEMSZ_SHIFT);
+	vga_rsvd = 0x8 << ((conf & MCR_CONF_VGA_MEMSZ_MASK) >> MCR_CONF_VGA_MEMSZ_SHIFT);
+
+	/* no VGA reservation if efuse VGA disable bit is set */
+	if (readl(scu->efuse) & SCU_EFUSE_DIS_VGA)
+		vga_rsvd = 0;
+
+	printf(" (capacity:%d MiB, VGA:%d MiB), ECC %s", act_size,
+	       vga_rsvd, (ecc) ? "on" : "off");
+}
+
+void enable_caches(void)
+{
+	/* get rid of the warning message */
+}
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2600/lowlevel_init.S b/roms/u-boot/arch/arm/mach-aspeed/ast2600/lowlevel_init.S
new file mode 100644
index 000000000..594963d03
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2600/lowlevel_init.S
@@ -0,0 +1,233 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) ASPEED Technology Inc.
+ */
+#include <config.h>
+#include <asm/armv7.h>
+#include <linux/linkage.h>
+#include <asm/arch/scu_ast2600.h>
+
+/* SCU register offsets */
+#define SCU_BASE		0x1e6e2000
+#define SCU_PROT_KEY1		(SCU_BASE + 0x000)
+#define SCU_PROT_KEY2		(SCU_BASE + 0x010)
+#define SCU_SMP_BOOT		(SCU_BASE + 0x180)
+#define SCU_HWSTRAP1		(SCU_BASE + 0x510)
+#define SCU_CA7_PARITY_CHK	(SCU_BASE + 0x820)
+#define SCU_CA7_PARITY_CLR	(SCU_BASE + 0x824)
+#define SCU_MMIO_DEC		(SCU_BASE + 0xc24)
+
+/* FMC SPI register offsets */
+#define FMC_BASE		0x1e620000
+#define FMC_CE0_CTRL		(FMC_BASE + 0x010)
+#define FMC_SW_RST_CTRL		(FMC_BASE + 0x050)
+#define FMC_WDT1_CTRL_MODE	(FMC_BASE + 0x060)
+#define FMC_WDT2_CTRL_MODE	(FMC_BASE + 0x064)
+
+/*
+ * The SMP mailbox provides a space with few instructions in it
+ * for secondary cores to execute on and wait for the signal of
+ * SMP core bring up.
+ *
+ *       SMP mailbox
+ * +----------------------+
+ * |                      |
+ * | mailbox insn. for    |
+ * | cpuN polling SMP go  |
+ * |                      |
+ * +----------------------+ 0xC
+ * | mailbox ready signal |
+ * +----------------------+ 0x8
+ * | cpuN GO signal       |
+ * +----------------------+ 0x4
+ * | cpuN entrypoint      |
+ * +----------------------+ SMP_MAILBOX_BASE
+ */
+#define SMP_MBOX_BASE		(SCU_SMP_BOOT)
+#define SMP_MBOX_FIELD_ENTRY	(SMP_MBOX_BASE + 0x0)
+#define SMP_MBOX_FIELD_GOSIGN	(SMP_MBOX_BASE + 0x4)
+#define SMP_MBOX_FIELD_READY	(SMP_MBOX_BASE + 0x8)
+#define SMP_MBOX_FIELD_POLLINSN	(SMP_MBOX_BASE + 0xc)
+
+.macro scu_unlock
+	movw	r0, #(SCU_UNLOCK_KEY & 0xffff)
+	movt	r0, #(SCU_UNLOCK_KEY >> 16)
+
+	ldr	r1, =SCU_PROT_KEY1
+	str	r0, [r1]
+	ldr	r1, =SCU_PROT_KEY2
+	str	r0, [r1]
+.endm
+
+.macro timer_init
+	ldr	r1, =SCU_HWSTRAP1
+	ldr	r1, [r1]
+	and	r1, #0x700
+	lsr	r1, #0x8
+
+	/* 1.2GHz */
+	cmp	r1, #0x0
+	movweq	r0, #0x8c00
+	movteq	r0, #0x4786
+
+	/* 1.6GHz */
+	cmp	r1, #0x1
+	movweq	r0, #0x1000
+	movteq	r0, #0x5f5e
+
+	/* 1.2GHz */
+	cmp	r1, #0x2
+	movweq	r0, #0x8c00
+	movteq	r0, #0x4786
+
+	/* 1.6GHz */
+	cmp	r1, #0x3
+	movweq	r0, #0x1000
+	movteq	r0, #0x5f5e
+
+	/* 800MHz */
+	cmp	r1, #0x4
+	movwge	r0, #0x0800
+	movtge	r0, #0x2faf
+
+	mcr	p15, 0, r0, c14, c0, 0	@; update CNTFRQ
+.endm
+
+
+.globl lowlevel_init
+
+lowlevel_init:
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+	mov	pc, lr
+#else
+	/* setup ARM arch timer frequency */
+	timer_init
+
+	/* reset SMP mailbox as early as possible */
+	mov	r0, #0x0
+	ldr	r1, =SMP_MBOX_FIELD_READY
+	str	r0, [r1]
+
+	/* set ACTLR.SMP to enable cache use */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, #0x40
+	mcr	p15, 0, r0, c1, c0, 1
+
+	/*
+	 * we treat cpu0 as the primary core and
+	 * put secondary core (cpuN) to sleep
+	 */
+	mrc   p15, 0, r0, c0, c0, 5	@; Read CPU ID register
+	ands  r0, #0xff			@; Mask off, leaving the CPU ID field
+	movw  r2, #0xab00
+	movt  r2, #0xabba
+	orr   r2, r0
+
+	beq   do_primary_core_setup
+
+	/* hold cpuN until mailbox is ready */
+poll_mailbox_ready:
+	wfe
+	ldr	r0, =SMP_MBOX_FIELD_READY
+	ldr	r0, [r0]
+	movw	r1, #0xcafe
+	movt	r1, #0xbabe
+	cmp	r1, r0
+	bne	poll_mailbox_ready
+
+	/* parameters for relocated SMP go polling insn. */
+	ldr	r0, =SMP_MBOX_FIELD_GOSIGN
+	ldr	r1, =SMP_MBOX_FIELD_ENTRY
+
+	/* no return */
+	ldr	pc, =SMP_MBOX_FIELD_POLLINSN
+
+do_primary_core_setup:
+	scu_unlock
+
+	/* MMIO decode setting */
+	ldr	r0, =SCU_MMIO_DEC
+	mov	r1, #0x2000
+	str	r1, [r0]
+
+	/* enable CA7 cache parity check */
+	mov	r0, #0
+	ldr	r1, =SCU_CA7_PARITY_CLR
+	str	r0, [r1]
+
+	mov	r0, #0x1
+	ldr	r1, =SCU_CA7_PARITY_CHK
+	str	r0, [r1]
+
+	/* do not fill FMC50[1] if boot from eMMC */
+	ldr	r0, =SCU_HWSTRAP1
+	ldr	r1, [r0]
+	ands	r1, #0x04
+	bne	skip_fill_wip_bit
+
+	/* fill FMC50[1] for waiting WIP idle */
+	mov	r0, #0x02
+	ldr	r1, =FMC_SW_RST_CTRL
+	str	r0, [r1]
+
+skip_fill_wip_bit:
+	/* disable FMC WDT for SPI address mode detection */
+	mov	r0, #0
+	ldr	r1, =FMC_WDT1_CTRL_MODE
+	str	r0, [r1]
+
+	/* relocate mailbox insn. for cpuN polling SMP go signal */
+	adrl	r0, mailbox_insn
+	adrl	r1, mailbox_insn_end
+
+	ldr	r2, =#SMP_MBOX_FIELD_POLLINSN
+
+relocate_mailbox_insn:
+	ldr	r3, [r0], #0x4
+	str	r3, [r2], #0x4
+	cmp	r0, r1
+	bne	relocate_mailbox_insn
+
+	/* reset SMP go sign */
+	mov	r0, #0
+	ldr	r1, =SMP_MBOX_FIELD_GOSIGN
+	str	r0, [r1]
+
+	/* notify cpuN mailbox is ready */
+	movw	r0, #0xCAFE
+	movt	r0, #0xBABE
+	ldr	r1, =SMP_MBOX_FIELD_READY
+	str	r0, [r1]
+	sev
+
+	/* back to arch calling code */
+	mov	pc, lr
+
+/*
+ * insn. inside mailbox to poll SMP go signal.
+ *
+ * Note that as this code will be relocated, any
+ * pc-relative assembly should NOT be used.
+ */
+mailbox_insn:
+	/*
+	 * r0 ~ r3 are parameters:
+	 *  r0 = SMP_MBOX_FIELD_GOSIGN
+	 *  r1 = SMP_MBOX_FIELD_ENTRY
+	 *  r2 = per-cpu go sign value
+	 *  r3 = no used now
+	 */
+poll_mailbox_smp_go:
+	wfe
+	ldr	r4, [r0]
+	cmp	r2, r4
+	bne	poll_mailbox_smp_go
+
+	/* SMP GO signal confirmed, release cpuN */
+	ldr	pc, [r1]
+
+mailbox_insn_end:
+	/* should never reach */
+	b	.
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2600/spl.c b/roms/u-boot/arch/arm/mach-aspeed/ast2600/spl.c
new file mode 100644
index 000000000..0d8cb2967
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast2600/spl.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <spl.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/scu_ast2600.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong dummy)
+{
+	spl_early_init();
+	preloader_console_init();
+	timer_init();
+	dram_init();
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_RAM;
+}
+
+struct image_header *spl_get_load_buffer(ssize_t offset, size_t size)
+{
+	/*
+	 * When boot from SPI, AST2600 already remap 0x00000000 ~ 0x0fffffff
+	 * to BMC SPI memory space 0x20000000 ~ 0x2fffffff. The next stage BL
+	 * has been located in SPI for XIP. In this case, the load buffer for
+	 * SPL image loading will be set to the remapped address of the next
+	 * BL instead of the DRAM space CONFIG_SYS_LOAD_ADDR
+	 */
+	return (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	/* boot linux */
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	/* just empty function now - can't decide what to choose */
+	debug("%s: %s\n", __func__, name);
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast_wdt.c b/roms/u-boot/arch/arm/mach-aspeed/ast_wdt.c
new file mode 100644
index 000000000..5bc442ef3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-aspeed/ast_wdt.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Google, Inc
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/wdt.h>
+#include <linux/err.h>
+
+u32 ast_reset_mode_from_flags(ulong flags)
+{
+	return flags & WDT_CTRL_RESET_MASK;
+}
+
+u32 ast_reset_mask_from_flags(ulong flags)
+{
+	return flags >> 2;
+}
+
+ulong ast_flags_from_reset_mode_mask(u32 reset_mode, u32 reset_mask)
+{
+	ulong ret = reset_mode & WDT_CTRL_RESET_MASK;
+
+	if (ret == WDT_CTRL_RESET_SOC)
+		ret |= (reset_mask << 2);
+
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/Kconfig b/roms/u-boot/arch/arm/mach-at91/Kconfig
new file mode 100644
index 000000000..1adf09b9a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/Kconfig
@@ -0,0 +1,347 @@
+if ARCH_AT91
+
+config AT91FAMILY
+	def_bool y
+
+config AT91SAM9260
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9G20
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9XE
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9261
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9263
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9G45
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9M10G45
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9N12
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9RL
+	bool
+	select CPU_ARM926EJS
+
+config AT91SAM9X5
+	bool
+	select CPU_ARM926EJS
+
+config SAM9X60
+	bool
+	select CPU_ARM926EJS
+
+config SAMA7G5
+	bool
+	select CPU_V7A
+
+config SAMA5D2
+	bool
+	select CPU_V7A
+	select ATMEL_SFR
+
+config SAMA5D3
+	bool
+	select CPU_V7A
+
+config SAMA5D4
+	bool
+	select CPU_V7A
+	select ATMEL_SFR
+
+choice
+	prompt "Atmel AT91 board select"
+	optional
+
+config TARGET_AT91RM9200EK
+	bool "Atmel AT91RM9200 evaluation kit"
+	select CPU_ARM920T
+
+config TARGET_AT91SAM9260EK
+	bool "Atmel at91sam9260 reference board"
+	select AT91SAM9260
+	select BOARD_EARLY_INIT_F
+
+config TARGET_ETHERNUT5
+	bool "Ethernut5 board"
+	select AT91SAM9XE
+
+config TARGET_SNAPPER9260
+	bool "Support snapper9260"
+	select AT91SAM9260
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_GURNARD
+	bool "Support gurnard"
+	select AT91SAM9G45
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_SERIAL
+	select DM_SPI
+	select SPI
+	imply CMD_DM
+
+config TARGET_AT91SAM9261EK
+	bool "Atmel at91sam9261 reference board"
+	select AT91SAM9261
+	select BOARD_EARLY_INIT_F
+
+config TARGET_PM9261
+	bool "Ronetix pm9261 board"
+	select AT91SAM9261
+
+config TARGET_AT91SAM9263EK
+	bool "Atmel at91sam9263 reference board"
+	select AT91SAM9263
+	select BOARD_EARLY_INIT_F
+
+config TARGET_USB_A9263
+	bool "Caloa USB A9260 board"
+	select AT91SAM9263
+
+config TARGET_PM9263
+	bool "Ronetix pm9263 board"
+	select AT91SAM9263
+
+config TARGET_AT91SAM9M10G45EK
+	bool "Atmel AT91SAM9M10G45-EK board"
+	select AT91SAM9M10G45
+	select BOARD_EARLY_INIT_F
+	select SUPPORT_SPL
+
+config TARGET_PM9G45
+	bool "Ronetix pm9g45 board"
+	select AT91SAM9G45
+
+config TARGET_AT91SAM9N12EK
+	bool "Atmel AT91SAM9N12-EK board"
+	select AT91SAM9N12
+	select BOARD_EARLY_INIT_F
+	select SUPPORT_SPL
+
+config TARGET_AT91SAM9RLEK
+	bool "Atmel at91sam9rl reference board"
+	select AT91SAM9RL
+	select BOARD_EARLY_INIT_F
+
+config TARGET_AT91SAM9X5EK
+	bool "Atmel AT91SAM9X5-EK board"
+	select AT91SAM9X5
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
+config TARGET_GARDENA_SMART_GATEWAY_AT91SAM
+	bool "GARDENA smart Gateway (AT91SAM)"
+	select AT91SAM9X5
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
+config TARGET_SAM9X60EK
+	bool "SAM9X60-EK board"
+	select SAM9X60
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+
+config TARGET_SAMA5D2_PTC_EK
+	bool "SAMA5D2 PTC EK board"
+	select BOARD_EARLY_INIT_F
+	select SAMA5D2
+	select BOARD_LATE_INIT
+
+config TARGET_SAMA5D2_XPLAINED
+	bool "SAMA5D2 Xplained board"
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SAMA5D2
+	select SUPPORT_SPL
+
+config TARGET_SAMA5D27_SOM1_EK
+	bool "SAMA5D27 SOM1 EK board"
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select SUPPORT_SPL
+	select ATMEL_SFR
+	help
+	  The SAMA5D27 SOM1 embeds SAMA5D2 SiP(System in Package),
+	  a 64Mbit QSPI flash, KSZ8081 Phy and a Mac-address EEPROM
+	  24AA02E48. The SAMA5D2 SiP integrates the ARM Cortex-A5
+	  processor-based SAMA5D2 MPU with up to 1 Gbit DDR2-SDRAM
+	  in a single package.
+
+config TARGET_SAMA5D27_WLSOM1_EK
+	bool "SAMA5D27 WLSOM1 EK board"
+	select SAMA5D2
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select SUPPORT_SPL
+	help
+	  The SAMA5D27 WLSOM1 embeds SAMA5D2 SiP (System in Package),
+	  a 64Mbit QSPI flash with Mac-address, KSZ8081 Phy. A wireless
+	  module providing bluetooth and wifi is also embedded.
+	  The SAMA5D2 SiP integrates the ARM Cortex-A5
+	  processor-based SAMA5D2 MPU with 2 Gbit LPDDR2-SDRAM
+	  in a single package.
+
+config TARGET_SAMA5D2_ICP
+	bool "SAMA5D2 Industrial Connectivity Platform (ICP)"
+	select SAMA5D2
+	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	help
+	  The SAMA5D2 ICP embeds SAMA5D27 rev. C SoC, together with
+	  a 64Mbit QSPI flash, 3xMikrobus connectors, 4xUSB ,
+	  EtherCat and WILC3000 devices on board.
+
+config TARGET_SAMA5D3_XPLAINED
+	bool "SAMA5D3 Xplained board"
+	select BOARD_EARLY_INIT_F
+	select SAMA5D3
+	select SUPPORT_SPL
+	select BOARD_LATE_INIT
+
+config TARGET_SAMA5D3XEK
+	bool "SAMA5D3X-EK board"
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SAMA5D3
+	select SUPPORT_SPL
+
+config TARGET_SAMA5D4_XPLAINED
+	bool "SAMA5D4 Xplained board"
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SAMA5D4
+	select SUPPORT_SPL
+
+config TARGET_SAMA5D4EK
+	bool "SAMA5D4 Evaluation Kit"
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SAMA5D4
+	select SUPPORT_SPL
+
+config TARGET_MEESC
+	bool "Support meesc"
+	select AT91SAM9263
+
+config TARGET_CORVUS
+	bool "Support corvus"
+	select AT91SAM9M10G45
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_SERIAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_SAMA7G5EK
+       bool "SAMA7G5 EK board"
+       select SAMA7G5
+       select BOARD_EARLY_INIT_F
+       select BOARD_LATE_INIT
+
+
+config TARGET_TAURUS
+	bool "Support taurus"
+	select AT91SAM9G20
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_SERIAL
+	select DM_SPI
+	select SPI
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_SMARTWEB
+	bool "Support smartweb"
+	select AT91SAM9260
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_SERIAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_VINCO
+	bool "Support VINCO"
+	select DM
+	select DM_SPI
+	select SAMA5D4
+	select SPI
+	select SUPPORT_SPL
+	imply CMD_DM
+
+endchoice
+
+config ATMEL_SFR
+	bool
+	default n
+
+config SYS_SOC
+	default "at91"
+
+source "board/atmel/at91rm9200ek/Kconfig"
+source "board/atmel/at91sam9260ek/Kconfig"
+source "board/atmel/at91sam9261ek/Kconfig"
+source "board/atmel/at91sam9263ek/Kconfig"
+source "board/atmel/at91sam9m10g45ek/Kconfig"
+source "board/atmel/at91sam9n12ek/Kconfig"
+source "board/atmel/at91sam9rlek/Kconfig"
+source "board/atmel/at91sam9x5ek/Kconfig"
+source "board/atmel/sam9x60ek/Kconfig"
+source "board/atmel/sama7g5ek/Kconfig"
+source "board/atmel/sama5d2_ptc_ek/Kconfig"
+source "board/atmel/sama5d2_xplained/Kconfig"
+source "board/atmel/sama5d27_som1_ek/Kconfig"
+source "board/atmel/sama5d27_wlsom1_ek/Kconfig"
+source "board/atmel/sama5d2_icp/Kconfig"
+source "board/atmel/sama5d3_xplained/Kconfig"
+source "board/atmel/sama5d3xek/Kconfig"
+source "board/atmel/sama5d4_xplained/Kconfig"
+source "board/atmel/sama5d4ek/Kconfig"
+source "board/bluewater/gurnard/Kconfig"
+source "board/bluewater/snapper9260/Kconfig"
+source "board/calao/usb_a9263/Kconfig"
+source "board/egnite/ethernut5/Kconfig"
+source "board/esd/meesc/Kconfig"
+source "board/gardena/smart-gateway-at91sam/Kconfig"
+source "board/l+g/vinco/Kconfig"
+source "board/ronetix/pm9261/Kconfig"
+source "board/ronetix/pm9263/Kconfig"
+source "board/ronetix/pm9g45/Kconfig"
+source "board/siemens/corvus/Kconfig"
+source "board/siemens/taurus/Kconfig"
+source "board/siemens/smartweb/Kconfig"
+
+config SPL_LDSCRIPT
+	default "arch/arm/mach-at91/arm926ejs/u-boot-spl.lds" if CPU_ARM926EJS
+	default "arch/arm/mach-at91/armv7/u-boot-spl.lds" if CPU_V7A
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-at91/Makefile b/roms/u-boot/arch/arm/mach-at91/Makefile
new file mode 100644
index 000000000..cbd0ed68c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
+ifneq ($(CONFIG_SPL_BUILD),)
+obj-$(CONFIG_AT91SAM9260) += sdram.o spl_at91.o
+obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o
+obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o
+obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o
+obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o
+obj-$(CONFIG_SAMA5D2) += bootparams_atmel.o mpddrc.o spl_atmel.o matrix.o
+obj-$(CONFIG_SAMA5D3) += bootparams_atmel.o mpddrc.o spl_atmel.o
+obj-$(CONFIG_SAMA5D4) += bootparams_atmel.o mpddrc.o spl_atmel.o matrix.o
+obj-y += spl.o
+obj-$(CONFIG_ATMEL_SFR) += atmel_sfr.o
+endif
+
+obj-y += clock.o
+obj-$(CONFIG_CPU_ARM920T)	+= arm920t/
+obj-$(CONFIG_CPU_ARM926EJS)	+= arm926ejs/
+obj-$(CONFIG_CPU_V7A)		+= armv7/
diff --git a/roms/u-boot/arch/arm/mach-at91/arm920t/Makefile b/roms/u-boot/arch/arm/mach-at91/arm920t/Makefile
new file mode 100644
index 000000000..3adf89357
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm920t/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	+= lowlevel_init.o
+obj-y	+= reset.o
+obj-y	+= timer.o
+obj-y	+= clock.o
+obj-y	+= cpu.o
+obj-y	+= at91rm9200_devices.o
diff --git a/roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c b/roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c
new file mode 100644
index 000000000..c849885bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * [partely copied from arch/arm/cpu/arm926ejs/at91/arm9260_devices.c]
+ *
+ * (C) Copyright 2011
+ * Andreas Bießmann <andreas@biessmann.org>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 17, 1);		/* TXD0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 18, PUP);		/* RXD0 */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 20, PUP);		/* RXD1 */
+	at91_set_a_periph(AT91_PIO_PORTB, 21, 1);		/* TXD1 */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 22, PUP);		/* RXD2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 23, 1);		/* TXD2 */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 30, PUP);		/* DRXD */
+	at91_set_a_periph(AT91_PIO_PORTA, 31, 1);		/* DTXD */
+	/* writing SYS to PCER has no effect on AT91RM9200 */
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm920t/clock.c b/roms/u-boot/arch/arm/mach-at91/arm920t/clock.c
new file mode 100644
index 000000000..c7440278d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm920t/clock.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
+ *
+ * Copyright (C) 2011 Andreas Bießmann
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+#include <common.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+#define EN_PLLB_TIMEOUT	500
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static unsigned long at91_css_to_rate(unsigned long css)
+{
+	switch (css) {
+	case AT91_PMC_MCKR_CSS_SLOW:
+		return CONFIG_SYS_AT91_SLOW_CLOCK;
+	case AT91_PMC_MCKR_CSS_MAIN:
+		return gd->arch.main_clk_rate_hz;
+	case AT91_PMC_MCKR_CSS_PLLA:
+		return gd->arch.plla_rate_hz;
+	case AT91_PMC_MCKR_CSS_PLLB:
+		return gd->arch.pllb_rate_hz;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_USB_ATMEL
+static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
+{
+	unsigned i, div = 0, mul = 0, diff = 1 << 30;
+	unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
+
+	/* PLL output max 240 MHz (or 180 MHz per errata) */
+	if (out_freq > 240000000)
+		goto fail;
+
+	for (i = 1; i < 256; i++) {
+		int diff1;
+		unsigned input, mul1;
+
+		/*
+		 * PLL input between 1MHz and 32MHz per spec, but lower
+		 * frequences seem necessary in some cases so allow 100K.
+		 * Warning: some newer products need 2MHz min.
+		 */
+		input = main_freq / i;
+		if (input < 100000)
+			continue;
+		if (input > 32000000)
+			continue;
+
+		mul1 = out_freq / input;
+		if (mul1 > 2048)
+			continue;
+		if (mul1 < 2)
+			goto fail;
+
+		diff1 = out_freq - input * mul1;
+		if (diff1 < 0)
+			diff1 = -diff1;
+		if (diff > diff1) {
+			diff = diff1;
+			div = i;
+			mul = mul1;
+			if (diff == 0)
+				break;
+		}
+	}
+	if (i == 256 && diff > (out_freq >> 5))
+		goto fail;
+	return ret | ((mul - 1) << 16) | div;
+fail:
+	return 0;
+}
+#endif
+
+static u32 at91_pll_rate(u32 freq, u32 reg)
+{
+	unsigned mul, div;
+
+	div = reg & 0xff;
+	mul = (reg >> 16) & 0x7ff;
+	if (div && mul) {
+		freq /= div;
+		freq *= mul + 1;
+	} else
+		freq = 0;
+
+	return freq;
+}
+
+int at91_clock_init(unsigned long main_clock)
+{
+	unsigned freq, mckr;
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+	unsigned tmp;
+	/*
+	 * When the bootloader initialized the main oscillator correctly,
+	 * there's no problem using the cycle counter.  But if it didn't,
+	 * or when using oscillator bypass mode, we must be told the speed
+	 * of the main clock.
+	 */
+	if (!main_clock) {
+		do {
+			tmp = readl(&pmc->mcfr);
+		} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
+		tmp &= AT91_PMC_MCFR_MAINF_MASK;
+		main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
+	}
+#endif
+	gd->arch.main_clk_rate_hz = main_clock;
+
+	/* report if PLLA is more than mildly overclocked */
+	gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+
+#ifdef CONFIG_USB_ATMEL
+	/*
+	 * USB clock init:  choose 48 MHz PLLB value,
+	 * disable 48MHz clock during usb peripheral suspend.
+	 *
+	 * REVISIT:  assumes MCK doesn't derive from PLLB!
+	 */
+	gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
+			     AT91_PMC_PLLBR_USBDIV_2;
+	gd->arch.pllb_rate_hz = at91_pll_rate(main_clock,
+					      gd->arch.at91_pllb_usb_init);
+#endif
+
+	/*
+	 * MCK and CPU derive from one of those primary clocks.
+	 * For now, assume this parentage won't change.
+	 */
+	mckr = readl(&pmc->mckr);
+	gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+	freq = gd->arch.mck_rate_hz;
+
+	freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2));	/* prescale */
+	/* mdiv */
+	gd->arch.mck_rate_hz = freq /
+			(1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+	gd->arch.cpu_clk_rate_hz = freq;
+
+	return 0;
+}
+
+int at91_pllb_clk_enable(u32 pllbr)
+{
+	struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+	ulong start_time, tmp_time;
+
+	start_time = get_timer(0);
+	writel(pllbr, &pmc->pllbr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) {
+		tmp_time = get_timer(0);
+		if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {
+			printf("ERROR: failed to enable PLLB\n");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+int at91_pllb_clk_disable(void)
+{
+	struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+	ulong start_time, tmp_time;
+
+	start_time = get_timer(0);
+	writel(0, &pmc->pllbr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) {
+		tmp_time = get_timer(0);
+		if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {
+			printf("ERROR: failed to disable PLLB\n");
+			return -1;
+		}
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm920t/cpu.c b/roms/u-boot/arch/arm/mach-at91/arm920t/cpu.c
new file mode 100644
index 000000000..44c079c0f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm920t/cpu.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * [origin: arch/arm/cpu/arm926ejs/at91/cpu.c]
+ *
+ * (C) Copyright 2011
+ * Andreas Bießmann, andreas@biessmann.org
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ * (C) Copyright 2009
+ * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
+
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+#define CONFIG_SYS_AT91_MAIN_CLOCK 0
+#endif
+
+int arch_cpu_init(void)
+{
+	return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm920t/lowlevel_init.S b/roms/u-boot/arch/arm/mach-at91/arm920t/lowlevel_init.S
new file mode 100644
index 000000000..de99c616a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm920t/lowlevel_init.S
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the at91rm9200dk board by
+ * (C) Copyright 2004
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+#include <config.h>
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_mc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pio.h>
+
+#define ARM920T_CONTROL	0xC0000000	/* @ set bit 31 (iA) and 30 (nF) */
+
+_MTEXT_BASE:
+#undef START_FROM_MEM
+#ifdef START_FROM_MEM
+	.word	CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
+#else
+	.word	CONFIG_SYS_TEXT_BASE
+#endif
+
+.globl lowlevel_init
+lowlevel_init:
+	ldr     r1, =AT91_ASM_PMC_MOR
+	/* Main oscillator Enable register */
+#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
+	ldr     r0, =0x0000FF01		/* Enable main oscillator */
+#else
+	ldr     r0, =0x0000FF00		/* Disable main oscillator */
+#endif
+	str     r0, [r1] /*AT91C_CKGR_MOR] */
+	/* Add loop to compensate Main Oscillator startup time */
+	ldr     r0, =0x00000010
+LoopOsc:
+	subs    r0, r0, #1
+	bhi     LoopOsc
+
+	/* memory control configuration */
+	/* this isn't very elegant, but	 what the heck */
+	ldr	r0, =SMRDATA
+	ldr	r1, _MTEXT_BASE
+	sub	r0, r0, r1
+	ldr	r2, =SMRDATAE
+	sub	r2, r2, r1
+pllloop:
+	/* the address */
+	ldr	r1, [r0], #4
+	/* the value */
+	ldr	r3, [r0], #4
+	str	r3, [r1]
+	cmp	r2, r0
+	bne	pllloop
+	/* delay - this is all done by guess */
+	ldr	r0, =0x00010000
+	/* (vs reading PMC_SR for LOCKA, LOCKB ... or MOSCS earlier) */
+lock:
+	subs	r0, r0, #1
+	bhi	lock
+	ldr	r0, =SMRDATA1
+	ldr	r1, _MTEXT_BASE
+	sub	r0, r0, r1
+	ldr	r2, =SMRDATA1E
+	sub	r2, r2, r1
+sdinit:
+	/* the address */
+	ldr	r1, [r0], #4
+	/* the value */
+	ldr	r3, [r0], #4
+	str	r3, [r1]
+	cmp	r2, r0
+	bne	sdinit
+
+	/* switch from FastBus to Asynchronous clock mode */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #ARM920T_CONTROL
+	mcr	p15, 0, r0, c1, c0, 0
+
+	/* everything is fine now */
+	mov	pc, lr
+
+	.ltorg
+
+SMRDATA:
+	.word AT91_ASM_MC_EBI_CFG
+	.word CONFIG_SYS_EBI_CFGR_VAL
+	.word AT91_ASM_MC_SMC_CSR0
+	.word CONFIG_SYS_SMC_CSR0_VAL
+	.word AT91_ASM_PMC_PLLAR
+	.word CONFIG_SYS_PLLAR_VAL
+	.word AT91_ASM_PMC_PLLBR
+	.word CONFIG_SYS_PLLBR_VAL
+	.word AT91_ASM_PMC_MCKR
+	.word CONFIG_SYS_MCKR_VAL
+SMRDATAE:
+	/* here there's a delay */
+SMRDATA1:
+	.word AT91_ASM_PIOC_ASR
+	.word CONFIG_SYS_PIOC_ASR_VAL
+	.word AT91_ASM_PIOC_BSR
+	.word CONFIG_SYS_PIOC_BSR_VAL
+	.word AT91_ASM_PIOC_PDR
+	.word CONFIG_SYS_PIOC_PDR_VAL
+	.word AT91_ASM_MC_EBI_CSA
+	.word CONFIG_SYS_EBI_CSA_VAL
+	.word AT91_ASM_MC_SDRAMC_CR
+	.word CONFIG_SYS_SDRC_CR_VAL
+	.word AT91_ASM_MC_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word AT91_ASM_MC_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL1
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word AT91_ASM_MC_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL2
+	.word CONFIG_SYS_SDRAM1
+	.word CONFIG_SYS_SDRAM_VAL
+	.word AT91_ASM_MC_SDRAMC_TR
+	.word CONFIG_SYS_SDRC_TR_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word AT91_ASM_MC_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL3
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+SMRDATA1E:
+	/* SMRDATA1 is 176 bytes long */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/roms/u-boot/arch/arm/mach-at91/arm920t/reset.c b/roms/u-boot/arch/arm/mach-at91/arm920t/reset.c
new file mode 100644
index 000000000..91e375146
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm920t/reset.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Lineo, Inc. <www.lineo.com>
+ * Bernhard Kuhn <bkuhn@lineo.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_st.h>
+
+void  __attribute__((weak)) board_reset(void)
+{
+	/* true empty function for defining weak symbol */
+}
+
+void reset_cpu(void)
+{
+	at91_st_t *st = (at91_st_t *) ATMEL_BASE_ST;
+
+	board_reset();
+
+	/* Reset the cpu by setting up the watchdog timer */
+	writel(AT91_ST_WDMR_RSTEN | AT91_ST_WDMR_EXTEN | AT91_ST_WDMR_WDV(2),
+		&st->wdmr);
+	writel(AT91_ST_CR_WDRST, &st->cr);
+	/* and let it timeout */
+	while (1)
+		;
+	/* Never reached */
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm920t/timer.c b/roms/u-boot/arch/arm/mach-at91/arm920t/timer.c
new file mode 100644
index 000000000..c400e8781
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm920t/timer.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2002
+ * Lineo, Inc. <www.lineo.com>
+ * Bernhard Kuhn <bkuhn@lineo.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_tc.h>
+#include <asm/arch/clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* the number of clocks per CONFIG_SYS_HZ */
+#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
+
+int timer_init(void)
+{
+	at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC;
+
+	at91_periph_clk_enable(ATMEL_ID_TC0);
+
+	writel(0, &tc->bcr);
+	writel(AT91_TC_BMR_TC0XC0S_NONE | AT91_TC_BMR_TC1XC1S_NONE |
+		AT91_TC_BMR_TC2XC2S_NONE , &tc->bmr);
+
+	writel(AT91_TC_CCR_CLKDIS, &tc->tc[0].ccr);
+	/* set to MCLK/2 and restart the timer
+	when the value in TC_RC is reached */
+	writel(AT91_TC_CMR_TCCLKS_CLOCK1 | AT91_TC_CMR_CPCTRG, &tc->tc[0].cmr);
+
+	writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interrupts */
+	writel(TIMER_LOAD_VAL, &tc->tc[0].rc);
+
+	writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr);
+	gd->arch.lastinc = 0;
+	gd->arch.tbl = 0;
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer_raw(void)
+{
+	at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC;
+	u32 now;
+
+	now = readl(&tc->tc[0].cv) & 0x0000ffff;
+
+	if (now >= gd->arch.lastinc) {
+		/* normal mode */
+		gd->arch.tbl += now - gd->arch.lastinc;
+	} else {
+		/* we have an overflow ... */
+		gd->arch.tbl += now + TIMER_LOAD_VAL - gd->arch.lastinc;
+	}
+	gd->arch.lastinc = now;
+
+	return gd->arch.tbl;
+}
+
+static ulong get_timer_masked(void)
+{
+	return get_timer_raw()/TIMER_LOAD_VAL;
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	u32 tmo;
+	u32 endtime;
+	signed long diff;
+
+	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
+	tmo *= usec;
+	tmo /= 1000;
+
+	endtime = get_timer_raw() + tmo;
+
+	do {
+		u32 now = get_timer_raw();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/Makefile b/roms/u-boot/arch/arm/mach-at91/arm926ejs/Makefile
new file mode 100644
index 000000000..8de6a2f96
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/Makefile
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-$(CONFIG_AT91SAM9260)	+= at91sam9260_devices.o
+obj-$(CONFIG_AT91SAM9G20)	+= at91sam9260_devices.o
+obj-$(CONFIG_AT91SAM9XE)	+= at91sam9260_devices.o
+obj-$(CONFIG_AT91SAM9261)	+= at91sam9261_devices.o
+obj-$(CONFIG_AT91SAM9G10)	+= at91sam9261_devices.o
+obj-$(CONFIG_AT91SAM9263)	+= at91sam9263_devices.o
+obj-$(CONFIG_AT91SAM9RL)	+= at91sam9rl_devices.o
+obj-$(CONFIG_AT91SAM9M10G45)	+= at91sam9m10g45_devices.o
+obj-$(CONFIG_AT91SAM9G45)	+= at91sam9m10g45_devices.o
+obj-$(CONFIG_AT91SAM9N12)	+= at91sam9n12_devices.o
+obj-$(CONFIG_AT91SAM9X5)	+= at91sam9x5_devices.o
+obj-$(CONFIG_SAM9X60)		+= sam9x60_devices.o
+obj-$(CONFIG_AT91_EFLASH)	+= eflash.o
+obj-$(CONFIG_AT91_LED)	+= led.o
+obj-y += clock.o
+obj-y += cpu.o
+obj-y	+= reset.o
+ifeq ($(CONFIG_ATMEL_PIT_TIMER),)
+obj-y	+= timer.o
+endif
+
+ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+obj-y	+= lowlevel_init.o
+endif
+endif
+
+ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+ifndef CONFIG_HAS_THUMB2
+
+CFLAGS_cache.o := -marm
+
+endif
+endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
new file mode 100644
index 000000000..c10571fa2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 4, 1);		/* TXD0 */
+	at91_set_a_periph(AT91_PIO_PORTB, 5, PUP);		/* RXD0 */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 6, 1);		/* TXD1 */
+	at91_set_a_periph(AT91_PIO_PORTB, 7, PUP);		/* RXD1 */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 8, 1);		/* TXD2 */
+	at91_set_a_periph(AT91_PIO_PORTB, 9, PUP);		/* RXD2 */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 14, PUP);		/* DRXD */
+	at91_set_a_periph(AT91_PIO_PORTB, 15, 1);		/* DTXD */
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 0, PUP);	/* SPI0_MISO */
+	at91_set_a_periph(AT91_PIO_PORTA, 1, PUP);	/* SPI0_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTA, 2, PUP);	/* SPI0_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_b_periph(AT91_PIO_PORTC, 11, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_b_periph(AT91_PIO_PORTC, 16, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_b_periph(AT91_PIO_PORTC, 17, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTC, 11, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTC, 16, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTC, 17, 1);
+	}
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 0, PUP);	/* SPI1_MISO */
+	at91_set_a_periph(AT91_PIO_PORTB, 1, PUP);	/* SPI1_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTB, 2, PUP);	/* SPI1_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI1);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_b_periph(AT91_PIO_PORTC, 5, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_b_periph(AT91_PIO_PORTC, 4, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_b_periph(AT91_PIO_PORTC, 3, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTC, 5, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTC, 4, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+	}
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_periph_clk_enable(ATMEL_ID_EMAC0);
+
+	at91_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* ETXCK_EREFCK */
+	at91_set_a_periph(AT91_PIO_PORTA, 17, 0);	/* ERXDV */
+	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* ERX0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* ERX1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* ERXER */
+	at91_set_a_periph(AT91_PIO_PORTA, 16, 0);	/* ETXEN */
+	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* ETX0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* ETX1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 21, 0);	/* EMDIO */
+	at91_set_a_periph(AT91_PIO_PORTA, 20, 0);	/* EMDC */
+
+#ifndef CONFIG_RMII
+	at91_set_b_periph(AT91_PIO_PORTA, 28, 0);	/* ECRS */
+	at91_set_b_periph(AT91_PIO_PORTA, 29, 0);	/* ECOL */
+	at91_set_b_periph(AT91_PIO_PORTA, 25, 0);	/* ERX2 */
+	at91_set_b_periph(AT91_PIO_PORTA, 26, 0);	/* ERX3 */
+	at91_set_b_periph(AT91_PIO_PORTA, 27, 0);	/* ERXCK */
+#if defined(CONFIG_AT91SAM9260EK)
+	/*
+	 * use PA10, PA11 for ETX2, ETX3.
+	 * PA23 and PA24 are for TWI EEPROM
+	 */
+	at91_set_b_periph(AT91_PIO_PORTA, 10, 0);	/* ETX2 */
+	at91_set_b_periph(AT91_PIO_PORTA, 11, 0);	/* ETX3 */
+#else
+	at91_set_b_periph(AT91_PIO_PORTA, 23, 0);	/* ETX2 */
+	at91_set_b_periph(AT91_PIO_PORTA, 24, 0);	/* ETX3 */
+#if defined(CONFIG_AT91SAM9G20)
+	/* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
+	at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
+	at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
+#endif
+#endif
+	at91_set_b_periph(AT91_PIO_PORTA, 22, 0);	/* ETXER */
+#endif
+}
+#endif
+
+#if defined(CONFIG_GENERIC_ATMEL_MCI)
+void at91_mci_hw_init(void)
+{
+	at91_periph_clk_enable(ATMEL_ID_MCI);
+
+	at91_set_a_periph(AT91_PIO_PORTA, 8, 1);	/* MCCK */
+#if defined(CONFIG_ATMEL_MCI_PORTB)
+	at91_set_b_periph(AT91_PIO_PORTA, 1, 1);	/* MCCDB */
+	at91_set_b_periph(AT91_PIO_PORTA, 0, 1);	/* MCDB0 */
+	at91_set_b_periph(AT91_PIO_PORTA, 5, 1);	/* MCDB1 */
+	at91_set_b_periph(AT91_PIO_PORTA, 4, 1);	/* MCDB2 */
+	at91_set_b_periph(AT91_PIO_PORTA, 3, 1);	/* MCDB3 */
+#else
+	at91_set_a_periph(AT91_PIO_PORTA, 7, 1);	/* MCCDA */
+	at91_set_a_periph(AT91_PIO_PORTA, 6, 1);	/* MCDA0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 9, 1);	/* MCDA1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 10, 1);	/* MCDA2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 11, 1);	/* MCDA3 */
+#endif
+}
+#endif
+
+void at91_sdram_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTC, 16, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 17, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 18, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 19, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 20, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 21, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 22, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 23, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 24, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 25, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 26, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 27, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 28, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 29, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 30, 0);
+	at91_set_a_periph(AT91_PIO_PORTC, 31, 0);
+}
+
+/* Platform data for the GPIOs */
+static const struct at91_port_plat at91sam9260_plat[] = {
+	{ ATMEL_BASE_PIOA, "PA" },
+	{ ATMEL_BASE_PIOB, "PB" },
+	{ ATMEL_BASE_PIOC, "PC" },
+};
+
+U_BOOT_DRVINFOS(at91sam9260_gpios) = {
+	{ "atmel_at91rm9200_gpio", &at91sam9260_plat[0] },
+	{ "atmel_at91rm9200_gpio", &at91sam9260_plat[1] },
+	{ "atmel_at91rm9200_gpio", &at91sam9260_plat[2] },
+};
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
new file mode 100644
index 000000000..0c2b9f2ec
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTC, 8, 1);		/* TXD0 */
+	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);		/* RXD0 */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTC, 12, 1);		/* TXD1 */
+	at91_set_a_periph(AT91_PIO_PORTC, 13, 0);		/* RXD1 */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTC, 14, 1);		/* TXD2 */
+	at91_set_a_periph(AT91_PIO_PORTC, 15, 0);		/* RXD2 */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 9, 0);		/* DRXD */
+	at91_set_a_periph(AT91_PIO_PORTA, 10, 1);		/* DTXD */
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 0, PUP);	/* SPI0_MISO */
+	at91_set_a_periph(AT91_PIO_PORTA, 1, PUP);	/* SPI0_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTA, 2, PUP);	/* SPI0_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_a_periph(AT91_PIO_PORTA, 4, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_a_periph(AT91_PIO_PORTA, 5, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_a_periph(AT91_PIO_PORTA, 6, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 4, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 6, 1);
+	}
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 30, PUP);	/* SPI1_MISO */
+	at91_set_a_periph(AT91_PIO_PORTB, 31, PUP);	/* SPI1_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTB, 29, PUP);	/* SPI1_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI1);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_a_periph(AT91_PIO_PORTB, 28, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_b_periph(AT91_PIO_PORTA, 24, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_b_periph(AT91_PIO_PORTA, 25, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_a_periph(AT91_PIO_PORTA, 26, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 28, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 24, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 25, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 26, 1);
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c
new file mode 100644
index 000000000..3b8a46238
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2009-2011
+ * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
+ * esd electronic system design gmbh <www.esd.eu>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 26, 1);		/* TXD0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 27, PUP);		/* RXD0 */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTD, 0, 1);		/* TXD1 */
+	at91_set_a_periph(AT91_PIO_PORTD, 1, PUP);		/* RXD1 */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTD, 2, 1);		/* TXD2 */
+	at91_set_a_periph(AT91_PIO_PORTD, 3, PUP);		/* RXD2 */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTC, 30, PUP);		/* DRXD */
+	at91_set_a_periph(AT91_PIO_PORTC, 31, 1);		/* DTXD */
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_b_periph(AT91_PIO_PORTA, 0, PUP);	/* SPI0_MISO */
+	at91_set_b_periph(AT91_PIO_PORTA, 1, PUP);	/* SPI0_MOSI */
+	at91_set_b_periph(AT91_PIO_PORTA, 2, PUP);	/* SPI0_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_b_periph(AT91_PIO_PORTA, 4, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_b_periph(AT91_PIO_PORTB, 11, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 4, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 11, 1);
+	}
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 12, PUP);	/* SPI1_MISO */
+	at91_set_a_periph(AT91_PIO_PORTB, 13, PUP);	/* SPI1_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTB, 14, PUP);	/* SPI1_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI1);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
+	}
+}
+#endif
+
+#if defined(CONFIG_GENERIC_ATMEL_MCI)
+void at91_mci_hw_init(void)
+{
+	at91_periph_clk_enable(ATMEL_ID_MCI1);
+
+	at91_set_a_periph(AT91_PIO_PORTA, 6, PUP);	/* MCI1_CK */
+
+#if defined(CONFIG_ATMEL_MCI_PORTB)
+	at91_set_a_periph(AT91_PIO_PORTA, 21, PUP);	/* MCI1_CDB */
+	at91_set_a_periph(AT91_PIO_PORTA, 22, PUP);	/* MCI1_DB0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 23, PUP);	/* MCI1_DB1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 24, PUP);	/* MCI1_DB2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 25, PUP);	/* MCI1_DB3 */
+#else
+	at91_set_a_periph(AT91_PIO_PORTA, 7, PUP);	/* MCI1_CDA */
+	at91_set_a_periph(AT91_PIO_PORTA, 8, PUP);	/* MCI1_DA0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 9, PUP);	/* MCI1_DA1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 10, PUP);	/* MCI1_DA2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 11, PUP);	/* MCI1_DA3 */
+#endif
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTE, 21, 0);	/* ETXCK_EREFCK */
+	at91_set_b_periph(AT91_PIO_PORTC, 25, 0);	/* ERXDV */
+	at91_set_a_periph(AT91_PIO_PORTE, 25, 0);	/* ERX0 */
+	at91_set_a_periph(AT91_PIO_PORTE, 26, 0);	/* ERX1 */
+	at91_set_a_periph(AT91_PIO_PORTE, 27, 0);	/* ERXER */
+	at91_set_a_periph(AT91_PIO_PORTE, 28, 0);	/* ETXEN */
+	at91_set_a_periph(AT91_PIO_PORTE, 23, 0);	/* ETX0 */
+	at91_set_a_periph(AT91_PIO_PORTE, 24, 0);	/* ETX1 */
+	at91_set_a_periph(AT91_PIO_PORTE, 30, 0);	/* EMDIO */
+	at91_set_a_periph(AT91_PIO_PORTE, 29, 0);	/* EMDC */
+
+#ifndef CONFIG_RMII
+	at91_set_a_periph(AT91_PIO_PORTE, 22, 0);	/* ECRS */
+	at91_set_b_periph(AT91_PIO_PORTC, 26, 0);	/* ECOL */
+	at91_set_b_periph(AT91_PIO_PORTC, 22, 0);	/* ERX2 */
+	at91_set_b_periph(AT91_PIO_PORTC, 23, 0);	/* ERX3 */
+	at91_set_b_periph(AT91_PIO_PORTC, 27, 0);	/* ERXCK */
+	at91_set_b_periph(AT91_PIO_PORTC, 20, 0);	/* ETX2 */
+	at91_set_b_periph(AT91_PIO_PORTC, 21, 0);	/* ETX3 */
+	at91_set_b_periph(AT91_PIO_PORTC, 24, 0);	/* ETXER */
+#endif
+}
+#endif
+
+#ifdef CONFIG_USB_OHCI_NEW
+void at91_uhp_hw_init(void)
+{
+	/* Enable VBus on UHP ports */
+	at91_set_pio_output(AT91_PIO_PORTA, 21, 0);
+	at91_set_pio_output(AT91_PIO_PORTA, 24, 0);
+}
+#endif
+
+#ifdef CONFIG_AT91_CAN
+void at91_can_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* CAN_TX */
+	at91_set_a_periph(AT91_PIO_PORTA, 14, 1);	/* CAN_RX */
+
+	at91_periph_clk_enable(ATMEL_ID_CAN);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c
new file mode 100644
index 000000000..d517810c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 19, 1);	/* TXD0 */
+	at91_set_a_periph(AT91_PIO_PORTB, 18, PUP);	/* RXD0 */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 4, 1);		/* TXD1 */
+	at91_set_a_periph(AT91_PIO_PORTB, 5, PUP);		/* RXD1 */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTD, 6, 1);		/* TXD2 */
+	at91_set_a_periph(AT91_PIO_PORTD, 7, PUP);		/* RXD2 */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* DRXD */
+	at91_set_a_periph(AT91_PIO_PORTB, 13, 1);	/* DTXD */
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 0, PUP);	/* SPI0_MISO */
+	at91_set_a_periph(AT91_PIO_PORTB, 1, PUP);	/* SPI0_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTB, 2, PUP);	/* SPI0_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_b_periph(AT91_PIO_PORTB, 18, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_b_periph(AT91_PIO_PORTB, 19, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_b_periph(AT91_PIO_PORTD, 27, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 19, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTD, 27, 1);
+	}
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 14, PUP);	/* SPI1_MISO */
+	at91_set_a_periph(AT91_PIO_PORTB, 15, PUP);	/* SPI1_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTB, 16, PUP);	/* SPI1_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI1);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_b_periph(AT91_PIO_PORTD, 28, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_a_periph(AT91_PIO_PORTD, 18, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_a_periph(AT91_PIO_PORTD, 19, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTD, 28, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTD, 18, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTD, 19, 1);
+	}
+
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 17, 0);	/* ETXCK_EREFCK */
+	at91_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* ERXDV */
+	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* ERX0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* ERX1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 16, 0);	/* ERXER */
+	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* ETXEN */
+	at91_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* ETX0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* ETX1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* EMDIO */
+	at91_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* EMDC */
+#ifndef CONFIG_RMII
+	at91_set_b_periph(AT91_PIO_PORTA, 29, 0);	/* ECRS */
+	at91_set_b_periph(AT91_PIO_PORTA, 30, 0);	/* ECOL */
+	at91_set_b_periph(AT91_PIO_PORTA, 8,  0);	/* ERX2 */
+	at91_set_b_periph(AT91_PIO_PORTA, 9,  0);	/* ERX3 */
+	at91_set_b_periph(AT91_PIO_PORTA, 28, 0);	/* ERXCK */
+	at91_set_b_periph(AT91_PIO_PORTA, 6,  0);	/* ETX2 */
+	at91_set_b_periph(AT91_PIO_PORTA, 7,  0);	/* ETX3 */
+	at91_set_b_periph(AT91_PIO_PORTA, 27, 0);	/* ETXER */
+#endif
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 0, 0);	/* MCI0 CLK */
+	at91_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* MCI0 CDA */
+	at91_set_a_periph(AT91_PIO_PORTA, 2, 0);	/* MCI0 DA0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 3, 0);	/* MCI0 DA1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 4, 0);	/* MCI0 DA2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 5, 0);	/* MCI0 DA3 */
+
+	at91_periph_clk_enable(ATMEL_ID_MCI0);
+}
+#endif
+
+/* Platform data for the GPIOs */
+static const struct at91_port_plat at91sam9260_plat[] = {
+	{ ATMEL_BASE_PIOA, "PA" },
+	{ ATMEL_BASE_PIOB, "PB" },
+	{ ATMEL_BASE_PIOC, "PC" },
+	{ ATMEL_BASE_PIOD, "PD" },
+	{ ATMEL_BASE_PIOE, "PE" },
+};
+
+U_BOOT_DRVINFOS(at91sam9260_gpios) = {
+	{ "atmel_at91rm9200_gpio", &at91sam9260_plat[0] },
+	{ "atmel_at91rm9200_gpio", &at91sam9260_plat[1] },
+	{ "atmel_at91rm9200_gpio", &at91sam9260_plat[2] },
+	{ "atmel_at91rm9200_gpio", &at91sam9260_plat[3] },
+	{ "atmel_at91rm9200_gpio", &at91sam9260_plat[4] },
+};
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
new file mode 100644
index 000000000..736c799e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013 Atmel Corporation
+ * Josh Wu <josh.wu@atmel.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/clk.h>
+
+unsigned int has_lcdc()
+{
+	return 1;
+}
+
+void at91_serial0_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 1);		/* TXD0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0);		/* RXD0 */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 1);		/* TXD1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0);		/* RXD1 */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 1);		/* TXD2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0);		/* RXD2 */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_serial3_hw_init(void)
+{
+	at91_pio3_set_b_periph(AT91_PIO_PORTC, 22, 1);		/* TXD3 */
+	at91_pio3_set_b_periph(AT91_PIO_PORTC, 23, 0);		/* RXD3 */
+	at91_periph_clk_enable(ATMEL_ID_USART3);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 1);		/* DTXD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0);		/* DRXD */
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* SPI0_MISO */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* SPI0_MOSI */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* SPI0_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+
+	if (cs_mask & (1 << 0))
+		at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
+	if (cs_mask & (1 << 1))
+		at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
+	if (cs_mask & (1 << 2))
+		at91_set_pio_output(AT91_PIO_PORTA, 1, 1);
+	if (cs_mask & (1 << 3))
+		at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_pio3_set_b_periph(AT91_PIO_PORTA, 21, 0);	/* SPI1_MISO */
+	at91_pio3_set_b_periph(AT91_PIO_PORTA, 22, 0);	/* SPI1_MOSI */
+	at91_pio3_set_b_periph(AT91_PIO_PORTA, 23, 0);	/* SPI1_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI1);
+
+	if (cs_mask & (1 << 0))
+		at91_set_pio_output(AT91_PIO_PORTA, 8, 1);
+	if (cs_mask & (1 << 1))
+		at91_set_pio_output(AT91_PIO_PORTA, 0, 1);
+	if (cs_mask & (1 << 2))
+		at91_set_pio_output(AT91_PIO_PORTA, 31, 1);
+	if (cs_mask & (1 << 3))
+		at91_set_pio_output(AT91_PIO_PORTA, 30, 1);
+}
+#endif
+
+void at91_mci_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0);	/* MCCK */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0);	/* MCCDA */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* MCDA0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* MCDA1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* MCDA2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0);	/* MCDA3 */
+
+	at91_periph_clk_enable(ATMEL_ID_HSMCI0);
+}
+
+#ifdef CONFIG_LCD
+void at91_lcd_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDDPWR */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDVSYNC */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDHSYNC */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0);	/* LCDDOTCK */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* LCDDEN */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0);	/* LCDDOTCK */
+
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* LCDD0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* LCDD1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* LCDD2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* LCDD3 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0);	/* LCDD4 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0);	/* LCDD5 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* LCDD6 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* LCDD7 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* LCDD8 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* LCDD9 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD10 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD11 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD12 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* LCDD13 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD14 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD15 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDD16 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0);	/* LCDD17 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDD18 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDD19 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0);	/* LCDD20 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0);	/* LCDD21 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDD22 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDD23 */
+
+	at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c
new file mode 100644
index 000000000..b4002eb75
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 6, 1);		/* TXD0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 7, PUP);		/* RXD0 */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 11, 1);		/* TXD1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 12, PUP);		/* RXD1 */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 13, 1);		/* TXD2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 14, PUP);		/* RXD2 */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 21, PUP);		/* DRXD */
+	at91_set_a_periph(AT91_PIO_PORTA, 22, 1);		/* DTXD */
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 25, PUP);	/* SPI0_MISO */
+	at91_set_a_periph(AT91_PIO_PORTA, 26, PUP);	/* SPI0_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTA, 27, PUP);	/* SPI0_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_a_periph(AT91_PIO_PORTA, 28, 1);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_b_periph(AT91_PIO_PORTB, 7, 1);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_a_periph(AT91_PIO_PORTD, 8, 1);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_b_periph(AT91_PIO_PORTD, 9, 1);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_pio_output(AT91_PIO_PORTA, 28, 1);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_pio_output(AT91_PIO_PORTB, 7, 1);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_pio_output(AT91_PIO_PORTD, 8, 1);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_pio_output(AT91_PIO_PORTD, 9, 1);
+	}
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 2, 0);        /* MCI CLK */
+	at91_set_a_periph(AT91_PIO_PORTA, 1, 0);        /* MCI CDA */
+	at91_set_a_periph(AT91_PIO_PORTA, 0, 0);        /* MCI DA0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 3, 0);        /* MCI DA1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 4, 0);        /* MCI DA2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 5, 0);        /* MCI DA3 */
+
+	at91_periph_clk_enable(ATMEL_ID_MCI);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c
new file mode 100644
index 000000000..f44760bed
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Atmel Corporation
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+unsigned int get_chip_id(void)
+{
+	/* The 0x40 is the offset of cidr in DBGU */
+	return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK;
+}
+
+unsigned int get_extension_chip_id(void)
+{
+	/* The 0x44 is the offset of exid in DBGU */
+	return readl(ATMEL_BASE_DBGU + 0x44);
+}
+
+unsigned int has_emac1()
+{
+	return cpu_is_at91sam9x25();
+}
+
+unsigned int has_emac0()
+{
+	return !(cpu_is_at91sam9g15());
+}
+
+unsigned int has_lcdc()
+{
+	return cpu_is_at91sam9g15() || cpu_is_at91sam9g35()
+		|| cpu_is_at91sam9x35();
+}
+
+char *get_cpu_name()
+{
+	unsigned int extension_id = get_extension_chip_id();
+
+	if (cpu_is_at91sam9x5()) {
+		switch (extension_id) {
+		case ARCH_EXID_AT91SAM9G15:
+			return "AT91SAM9G15";
+		case ARCH_EXID_AT91SAM9G25:
+			return "AT91SAM9G25";
+		case ARCH_EXID_AT91SAM9G35:
+			return "AT91SAM9G35";
+		case ARCH_EXID_AT91SAM9X25:
+			return "AT91SAM9X25";
+		case ARCH_EXID_AT91SAM9X35:
+			return "AT91SAM9X35";
+		default:
+			return "Unknown CPU type";
+		}
+	} else {
+		return "Unknown CPU type";
+	}
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0);	/* DRXD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 1);	/* DTXD */
+
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+void at91_serial0_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 1);	/* TXD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* RXD */
+
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 1);	/* TXD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0);	/* RXD */
+
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 1);	/* TXD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0);	/* RXD */
+
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_mci_hw_init(void)
+{
+	/* Initialize the MCI0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 1);	/* MCCK */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 1);	/* MCCDA */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 1);	/* MCDA0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 1);	/* MCDA1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 1);	/* MCDA2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 1);	/* MCDA3 */
+
+	at91_periph_clk_enable(ATMEL_ID_HSMCI0);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* SPI0_MISO */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* SPI0_MOSI */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* SPI0_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+
+	if (cs_mask & (1 << 0))
+		at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0);
+	if (cs_mask & (1 << 1))
+		at91_pio3_set_b_periph(AT91_PIO_PORTA, 7, 0);
+	if (cs_mask & (1 << 2))
+		at91_pio3_set_b_periph(AT91_PIO_PORTA, 1, 0);
+	if (cs_mask & (1 << 3))
+		at91_pio3_set_b_periph(AT91_PIO_PORTB, 3, 0);
+	if (cs_mask & (1 << 4))
+		at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
+	if (cs_mask & (1 << 5))
+		at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
+	if (cs_mask & (1 << 6))
+		at91_set_pio_output(AT91_PIO_PORTA, 1, 0);
+	if (cs_mask & (1 << 7))
+		at91_set_pio_output(AT91_PIO_PORTB, 3, 0);
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_pio3_set_b_periph(AT91_PIO_PORTA, 21, 0);	/* SPI1_MISO */
+	at91_pio3_set_b_periph(AT91_PIO_PORTA, 22, 0);	/* SPI1_MOSI */
+	at91_pio3_set_b_periph(AT91_PIO_PORTA, 23, 0);	/* SPI1_SPCK */
+
+	at91_periph_clk_enable(ATMEL_ID_SPI1);
+
+	if (cs_mask & (1 << 0))
+		at91_pio3_set_b_periph(AT91_PIO_PORTA, 8, 0);
+	if (cs_mask & (1 << 1))
+		at91_pio3_set_b_periph(AT91_PIO_PORTA, 0, 0);
+	if (cs_mask & (1 << 2))
+		at91_pio3_set_b_periph(AT91_PIO_PORTA, 31, 0);
+	if (cs_mask & (1 << 3))
+		at91_pio3_set_b_periph(AT91_PIO_PORTA, 30, 0);
+	if (cs_mask & (1 << 4))
+		at91_set_pio_output(AT91_PIO_PORTA, 8, 0);
+	if (cs_mask & (1 << 5))
+		at91_set_pio_output(AT91_PIO_PORTA, 0, 0);
+	if (cs_mask & (1 << 6))
+		at91_set_pio_output(AT91_PIO_PORTA, 31, 0);
+	if (cs_mask & (1 << 7))
+		at91_set_pio_output(AT91_PIO_PORTA, 30, 0);
+}
+#endif
+
+#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI_HCD)
+void at91_uhp_hw_init(void)
+{
+	/* Enable VBus on UHP ports */
+	at91_set_pio_output(AT91_PIO_PORTD, 18, 0); /* port A */
+	at91_set_pio_output(AT91_PIO_PORTD, 19, 0); /* port B */
+#if defined(CONFIG_USB_OHCI_NEW)
+	/* port C is OHCI only */
+	at91_set_pio_output(AT91_PIO_PORTD, 20, 0); /* port C */
+#endif
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	if (has_emac0()) {
+		/* Enable EMAC0 clock */
+		at91_periph_clk_enable(ATMEL_ID_EMAC0);
+		/* EMAC0 pins setup */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 4, 0);	/* ETXCK */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 3, 0);	/* ERXDV */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* ERX0 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 1, 0);	/* ERX1 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* ERXER */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0);	/* ETXEN */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0);	/* ETX0 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 10, 0);	/* ETX1 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 5, 0);	/* EMDIO */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0);	/* EMDC */
+	}
+
+	if (has_emac1()) {
+		/* Enable EMAC1 clock */
+		at91_periph_clk_enable(ATMEL_ID_EMAC1);
+		/* EMAC1 pins setup */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 29, 0);	/* ETXCK */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 28, 0);	/* ECRSDV */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 20, 0);	/* ERXO */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 21, 0);	/* ERX1 */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 16, 0);	/* ERXER */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 27, 0);	/* ETXEN */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 18, 0);	/* ETX0 */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 19, 0);	/* ETX1 */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 31, 0);	/* EMDIO */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 30, 0);	/* EMDC */
+	}
+
+#ifndef CONFIG_RMII
+	/* Only emac0 support MII */
+	if (has_emac0()) {
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* ECRS */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0);	/* ECOL */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* ERX2 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 14, 0);	/* ERX3 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 15, 0);	/* ERXCK */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 11, 0);	/* ETX2 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* ETX3 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0);	/* ETXER */
+	}
+#endif
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/clock.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/clock.c
new file mode 100644
index 000000000..c68e0c0c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/clock.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
+ *
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <common.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+#define EN_PLLB_TIMEOUT	500
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static unsigned long at91_css_to_rate(unsigned long css)
+{
+	switch (css) {
+	case AT91_PMC_MCKR_CSS_SLOW:
+		return CONFIG_SYS_AT91_SLOW_CLOCK;
+	case AT91_PMC_MCKR_CSS_MAIN:
+		return gd->arch.main_clk_rate_hz;
+	case AT91_PMC_MCKR_CSS_PLLA:
+		return gd->arch.plla_rate_hz;
+	case AT91_PMC_MCKR_CSS_PLLB:
+		return gd->arch.pllb_rate_hz;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_USB_ATMEL
+static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
+{
+	unsigned i, div = 0, mul = 0, diff = 1 << 30;
+	unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
+
+	/* PLL output max 240 MHz (or 180 MHz per errata) */
+	if (out_freq > 240000000)
+		goto fail;
+
+	for (i = 1; i < 256; i++) {
+		int diff1;
+		unsigned input, mul1;
+
+		/*
+		 * PLL input between 1MHz and 32MHz per spec, but lower
+		 * frequences seem necessary in some cases so allow 100K.
+		 * Warning: some newer products need 2MHz min.
+		 */
+		input = main_freq / i;
+#if defined(CONFIG_AT91SAM9G20)
+		if (input < 2000000)
+			continue;
+#endif
+		if (input < 100000)
+			continue;
+		if (input > 32000000)
+			continue;
+
+		mul1 = out_freq / input;
+#if defined(CONFIG_AT91SAM9G20)
+		if (mul > 63)
+			continue;
+#endif
+		if (mul1 > 2048)
+			continue;
+		if (mul1 < 2)
+			goto fail;
+
+		diff1 = out_freq - input * mul1;
+		if (diff1 < 0)
+			diff1 = -diff1;
+		if (diff > diff1) {
+			diff = diff1;
+			div = i;
+			mul = mul1;
+			if (diff == 0)
+				break;
+		}
+	}
+	if (i == 256 && diff > (out_freq >> 5))
+		goto fail;
+	return ret | ((mul - 1) << 16) | div;
+fail:
+	return 0;
+}
+#endif
+
+static u32 at91_pll_rate(u32 freq, u32 reg)
+{
+	unsigned mul, div;
+
+	div = reg & 0xff;
+	mul = (reg >> 16) & 0x7ff;
+	if (div && mul) {
+		freq /= div;
+		freq *= mul + 1;
+	} else
+		freq = 0;
+
+	return freq;
+}
+
+int at91_clock_init(unsigned long main_clock)
+{
+	unsigned freq, mckr;
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+	unsigned tmp;
+	/*
+	 * When the bootloader initialized the main oscillator correctly,
+	 * there's no problem using the cycle counter.  But if it didn't,
+	 * or when using oscillator bypass mode, we must be told the speed
+	 * of the main clock.
+	 */
+	if (!main_clock) {
+		do {
+			tmp = readl(&pmc->mcfr);
+		} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
+		tmp &= AT91_PMC_MCFR_MAINF_MASK;
+		main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
+	}
+#endif
+	gd->arch.main_clk_rate_hz = main_clock;
+
+	/* report if PLLA is more than mildly overclocked */
+	gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+
+#ifdef CONFIG_USB_ATMEL
+	/*
+	 * USB clock init:  choose 48 MHz PLLB value,
+	 * disable 48MHz clock during usb peripheral suspend.
+	 *
+	 * REVISIT:  assumes MCK doesn't derive from PLLB!
+	 */
+	gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
+			     AT91_PMC_PLLBR_USBDIV_2;
+	gd->arch.pllb_rate_hz = at91_pll_rate(main_clock,
+					      gd->arch.at91_pllb_usb_init);
+#endif
+
+	/*
+	 * MCK and CPU derive from one of those primary clocks.
+	 * For now, assume this parentage won't change.
+	 */
+	mckr = readl(&pmc->mckr);
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
+		|| defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
+	/* plla divisor by 2 */
+	gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
+#endif
+	gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+	freq = gd->arch.mck_rate_hz;
+
+#if defined(CONFIG_AT91SAM9X5)
+	/* different in prescale on at91sam9x5 */
+	freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 4));
+#else
+	freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2));	/* prescale */
+#endif
+
+#if defined(CONFIG_AT91SAM9G20)
+	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
+	gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
+		freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
+	if (mckr & AT91_PMC_MCKR_MDIV_MASK)
+		freq /= 2;			/* processor clock division */
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
+		|| defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
+	/* mdiv <==> divisor
+	 *  0   <==>   1
+	 *  1   <==>   2
+	 *  2   <==>   4
+	 *  3   <==>   3
+	 */
+	gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
+		(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
+		? freq / 3
+		: freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+#else
+	gd->arch.mck_rate_hz = freq /
+			(1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+#endif
+	gd->arch.cpu_clk_rate_hz = freq;
+
+	return 0;
+}
+
+#if !defined(AT91_PLL_LOCK_TIMEOUT)
+#define AT91_PLL_LOCK_TIMEOUT	1000000
+#endif
+
+void at91_plla_init(u32 pllar)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(pllar, &pmc->pllar);
+	while (!(readl(&pmc->sr) & AT91_PMC_LOCKA))
+		;
+}
+void at91_pllb_init(u32 pllbr)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(pllbr, &pmc->pllbr);
+	while (!(readl(&pmc->sr) & AT91_PMC_LOCKB))
+		;
+}
+
+void at91_mck_init(u32 mckr)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = readl(&pmc->mckr);
+	tmp &= ~AT91_PMC_MCKR_PRES_MASK;
+	tmp |= mckr & AT91_PMC_MCKR_PRES_MASK;
+	writel(tmp, &pmc->mckr);
+	while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+		;
+
+	tmp = readl(&pmc->mckr);
+	tmp &= ~AT91_PMC_MCKR_MDIV_MASK;
+	tmp |= mckr & AT91_PMC_MCKR_MDIV_MASK;
+	writel(tmp, &pmc->mckr);
+	while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+		;
+
+	tmp = readl(&pmc->mckr);
+	tmp &= ~AT91_PMC_MCKR_PLLADIV_MASK;
+	tmp |= mckr & AT91_PMC_MCKR_PLLADIV_MASK;
+	writel(tmp, &pmc->mckr);
+	while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+		;
+
+	tmp = readl(&pmc->mckr);
+	tmp &= ~AT91_PMC_MCKR_CSS_MASK;
+	tmp |= mckr & AT91_PMC_MCKR_CSS_MASK;
+	writel(tmp, &pmc->mckr);
+	while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+		;
+}
+
+int at91_pllb_clk_enable(u32 pllbr)
+{
+	struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+	ulong start_time, tmp_time;
+
+	start_time = get_timer(0);
+	writel(pllbr, &pmc->pllbr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) {
+		tmp_time = get_timer(0);
+		if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {
+			printf("ERROR: failed to enable PLLB\n");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+int at91_pllb_clk_disable(void)
+{
+	struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+	ulong start_time, tmp_time;
+
+	start_time = get_timer(0);
+	writel(0, &pmc->pllbr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) {
+		tmp_time = get_timer(0);
+		if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {
+			printf("ERROR: failed to disable PLLB\n");
+			return -1;
+		}
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/cpu.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/cpu.c
new file mode 100644
index 000000000..761edb6df
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/cpu.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ * (C) Copyright 2009
+ * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <vsprintf.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_gpbr.h>
+#include <asm/arch/clk.h>
+
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+#define CONFIG_SYS_AT91_MAIN_CLOCK 0
+#endif
+
+int arch_cpu_init(void)
+{
+	return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+}
+
+void arch_preboot_os(void)
+{
+	ulong cpiv;
+	at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
+
+	cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir));
+
+	/*
+	 * Disable PITC
+	 * Add 0x1000 to current counter to stop it faster
+	 * without waiting for wrapping back to 0
+	 */
+	writel(cpiv + 0x1000, &pit->mr);
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char __maybe_unused buf[32];
+
+	printf("CPU: %s\n", ATMEL_CPU_NAME);
+	printf("Crystal frequency: %8s MHz\n",
+					strmhz(buf, get_main_clk_rate()));
+	printf("CPU clock        : %8s MHz\n",
+					strmhz(buf, get_cpu_clk_rate()));
+	printf("Master clock     : %8s MHz\n",
+					strmhz(buf, get_mck_clk_rate()));
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/eflash.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/eflash.c
new file mode 100644
index 000000000..23c24936e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/eflash.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ */
+
+/*
+ * this driver supports the enhanced embedded flash in the Atmel
+ * AT91SAM9XE devices with the following geometry:
+ *
+ * AT91SAM9XE128: 1 plane of  8 regions of 32 pages (total  256 pages)
+ * AT91SAM9XE256: 1 plane of 16 regions of 32 pages (total  512 pages)
+ * AT91SAM9XE512: 1 plane of 32 regions of 32 pages (total 1024 pages)
+ * (the exact geometry is read from the flash at runtime, so any
+ *  future devices should already be covered)
+ *
+ * Regions can be write/erase protected.
+ * Whole (!) pages can be individually written with erase on the fly.
+ * Writing partial pages will corrupt the rest of the page.
+ *
+ * The flash is presented to u-boot with each region being a sector,
+ * having the following effects:
+ * Each sector can be hardware protected (protect on/off).
+ * Each page in a sector can be rewritten anytime.
+ * Since pages are erased when written, the "erase" does nothing.
+ * The first "CONFIG_EFLASH_PROTSECTORS" cannot be unprotected
+ * by u-Boot commands.
+ *
+ * Note: Redundant environment will not work in this flash since
+ * it does use partial page writes. Make sure the environment spans
+ * whole pages!
+ */
+
+/*
+ * optional TODOs (nice to have features):
+ *
+ * make the driver coexist with other NOR flash drivers
+ *	(use an index into flash_info[], requires work
+ *	in those other drivers, too)
+ * Make the erase command fill the sectors with 0xff
+ *	(if the flashes grow larger in the future and
+ *	someone puts a jffs2 into them)
+ * do a read-modify-write for partially programmed pages
+ */
+#include <common.h>
+#include <flash.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_eefc.h>
+#include <asm/arch/at91_dbu.h>
+
+/* checks to detect configuration errors */
+#if CONFIG_SYS_MAX_FLASH_BANKS!=1
+#error eflash: this driver can only handle 1 bank
+#endif
+
+/* global structure */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+static u32 pagesize;
+
+unsigned long flash_init(void)
+{
+	at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC;
+	at91_dbu_t *dbu = (at91_dbu_t *) ATMEL_BASE_DBGU;
+	u32 id, size, nplanes, planesize, nlocks;
+	u32 addr, i, tmp=0;
+
+	debug("eflash: init\n");
+
+	flash_info[0].flash_id = FLASH_UNKNOWN;
+
+	/* check if its an AT91ARM9XE SoC */
+	if ((readl(&dbu->cidr) & AT91_DBU_CID_ARCH_MASK) != AT91_DBU_CID_ARCH_9XExx) {
+		puts("eflash: not an AT91SAM9XE\n");
+		return 0;
+	}
+
+	/* now query the eflash for its structure */
+	writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GETD, &eefc->fcr);
+	while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+		;
+	id = readl(&eefc->frr);		/* word 0 */
+	size = readl(&eefc->frr);	/* word 1 */
+	pagesize = readl(&eefc->frr);	/* word 2 */
+	nplanes = readl(&eefc->frr);	/* word 3 */
+	planesize = readl(&eefc->frr);	/* word 4 */
+	debug("id=%08x size=%u pagesize=%u planes=%u planesize=%u\n",
+		id, size, pagesize, nplanes, planesize);
+	for (i=1; i<nplanes; i++) {
+		tmp = readl(&eefc->frr);	/* words 5..4+nplanes-1 */
+	};
+	nlocks = readl(&eefc->frr);	/* word 4+nplanes */
+	debug("nlocks=%u\n", nlocks);
+	/* since we are going to use the lock regions as sectors, check count */
+	if (nlocks > CONFIG_SYS_MAX_FLASH_SECT) {
+		printf("eflash: number of lock regions(%u) "\
+			"> CONFIG_SYS_MAX_FLASH_SECT. reducing...\n",
+			nlocks);
+		nlocks = CONFIG_SYS_MAX_FLASH_SECT;
+	}
+	flash_info[0].size = size;
+	flash_info[0].sector_count = nlocks;
+	flash_info[0].flash_id = id;
+
+	addr = ATMEL_BASE_FLASH;
+	for (i=0; i<nlocks; i++) {
+		tmp = readl(&eefc->frr);	/* words 4+nplanes+1.. */
+		flash_info[0].start[i] = addr;
+		flash_info[0].protect[i] = 0;
+		addr += tmp;
+	};
+
+	/* now read the protection information for all regions */
+	writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr);
+	while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+		;
+	for (i=0; i<flash_info[0].sector_count; i++) {
+		if (i%32 == 0)
+			tmp = readl(&eefc->frr);
+		flash_info[0].protect[i] = (tmp >> (i%32)) & 1;
+#if defined(CONFIG_EFLASH_PROTSECTORS)
+		if (i < CONFIG_EFLASH_PROTSECTORS)
+			flash_info[0].protect[i] = 1;
+#endif
+	}
+
+	return size;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+	int i;
+
+	puts("AT91SAM9XE embedded flash\n  Size: ");
+	print_size(info->size, " in ");
+	printf("%d Sectors\n", info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+	return;
+}
+
+int flash_real_protect (flash_info_t *info, long sector, int prot)
+{
+	at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC;
+	u32 pagenum = (info->start[sector]-ATMEL_BASE_FLASH)/pagesize;
+	u32 i, tmp=0;
+
+	debug("protect sector=%ld prot=%d\n", sector, prot);
+
+#if defined(CONFIG_EFLASH_PROTSECTORS)
+	if (sector < CONFIG_EFLASH_PROTSECTORS) {
+		if (!prot) {
+			printf("eflash: sector %lu cannot be unprotected\n",
+				sector);
+		}
+		return 1; /* return anyway, caller does not care for result */
+	}
+#endif
+	if (prot) {
+		writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_SLB |
+			(pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr);
+	} else {
+		writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_CLB |
+			(pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr);
+	}
+	while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+		;
+	/* now re-read the protection information for all regions */
+	writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr);
+	while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+		;
+	for (i=0; i<info->sector_count; i++) {
+		if (i%32 == 0)
+			tmp = readl(&eefc->frr);
+		info->protect[i] = (tmp >> (i%32)) & 1;
+	}
+	return 0;
+}
+
+static u32 erase_write_page (u32 pagenum)
+{
+	at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC;
+
+	debug("erase+write page=%u\n", pagenum);
+
+	/* give erase and write page command */
+	writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_EWP |
+		(pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr);
+	while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+		;
+	/* return status */
+	return readl(&eefc->fsr)
+		& (AT91_EEFC_FSR_FCMDE | AT91_EEFC_FSR_FLOCKE);
+}
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	debug("erase first=%d last=%d\n", s_first, s_last);
+	puts("this flash does not need and support erasing!\n");
+	return 0;
+}
+
+/*
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ */
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	u32 pagenum;
+	u32 *src32, *dst32;
+	u32 i;
+
+	debug("write src=%08lx addr=%08lx cnt=%lx\n",
+		(ulong)src, addr, cnt);
+
+	/* REQUIRE addr to be on a page start, abort if not */
+	if (addr % pagesize) {
+		printf ("eflash: start %08lx is not on page start\n"\
+			"        write aborted\n", addr);
+		return 1;
+	}
+
+	/* now start copying data */
+	pagenum = (addr-ATMEL_BASE_FLASH)/pagesize;
+	src32 = (u32 *) src;
+	dst32 = (u32 *) addr;
+	while (cnt > 0) {
+		i = pagesize / 4;
+		/* fill page buffer */
+		while (i--)
+			*dst32++ = *src32++;
+		/* write page */
+		if (erase_write_page(pagenum))
+			return 1;
+		pagenum++;
+		if (cnt > pagesize)
+			cnt -= pagesize;
+		else
+			cnt = 0;
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/led.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/led.c
new file mode 100644
index 000000000..de24db183
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/led.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
+#include <status_led.h>
+
+#ifdef CONFIG_RED_LED
+void red_led_on(void)
+{
+	gpio_set_value(CONFIG_RED_LED, 1);
+}
+
+void red_led_off(void)
+{
+	gpio_set_value(CONFIG_RED_LED, 0);
+}
+#endif
+
+#ifdef CONFIG_GREEN_LED
+void green_led_on(void)
+{
+	gpio_set_value(CONFIG_GREEN_LED, 0);
+}
+
+void green_led_off(void)
+{
+	gpio_set_value(CONFIG_GREEN_LED, 1);
+}
+#endif
+
+#ifdef CONFIG_YELLOW_LED
+void yellow_led_on(void)
+{
+	gpio_set_value(CONFIG_YELLOW_LED, 0);
+}
+
+void yellow_led_off(void)
+{
+	gpio_set_value(CONFIG_YELLOW_LED, 1);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/lowlevel_init.S b/roms/u-boot/arch/arm/mach-at91/arm926ejs/lowlevel_init.S
new file mode 100644
index 000000000..994f42eb4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/lowlevel_init.S
@@ -0,0 +1,245 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <config.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_rstc.h>
+#ifdef CONFIG_ATMEL_LEGACY
+#include <asm/arch/at91sam9_matrix.h>
+#endif
+#ifndef CONFIG_SYS_MATRIX_EBICSA_VAL
+#define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL
+#endif
+
+.globl lowlevel_init
+.type lowlevel_init,function
+lowlevel_init:
+
+POS1:
+	adr	r5, POS1	/* r5 = POS1 run time */
+	ldr	r0, =POS1	/* r0 = POS1 compile */
+	sub	r5, r5, r0	/* r0 = CONFIG_SYS_TEXT_BASE-1 */
+
+	/* memory control configuration 1 */
+	ldr	r0, =SMRDATA
+	ldr	r2, =SMRDATA1
+	add	r0, r0, r5
+	add	r2, r2, r5
+0:
+	/* the address */
+	ldr	r1, [r0], #4
+	/* the value */
+	ldr	r3, [r0], #4
+	str	r3, [r1]
+	cmp	r2, r0
+	bne	0b
+
+/* ----------------------------------------------------------------------------
+ * PMC Init Step 1.
+ * ----------------------------------------------------------------------------
+ * - Check if the PLL is already initialized
+ * ----------------------------------------------------------------------------
+ */
+	ldr	r1, =(AT91_ASM_PMC_MCKR)
+	ldr	r0, [r1]
+	and	r0, r0, #3
+	cmp	r0, #0
+	bne	PLL_setup_end
+
+/* ---------------------------------------------------------------------------
+ * - Enable the Main Oscillator
+ * ---------------------------------------------------------------------------
+ */
+	ldr	r1, =(AT91_ASM_PMC_MOR)
+	ldr	r2, =(AT91_ASM_PMC_SR)
+	/* Main oscillator Enable register PMC_MOR: */
+	ldr	r0, =CONFIG_SYS_MOR_VAL
+	str	r0, [r1]
+
+	/* Reading the PMC Status to detect when the Main Oscillator is enabled */
+	mov	r6, #AT91_PMC_IXR_MOSCS
+MOSCS_Loop:
+	ldr	r3, [r2]
+	and	r3, r6, r3
+	cmp	r3, #AT91_PMC_IXR_MOSCS
+	bne	MOSCS_Loop
+
+/* ----------------------------------------------------------------------------
+ * PMC Init Step 2.
+ * ----------------------------------------------------------------------------
+ * Setup PLLA
+ * ----------------------------------------------------------------------------
+ */
+	ldr	r1, =(AT91_ASM_PMC_PLLAR)
+	ldr	r0, =CONFIG_SYS_PLLAR_VAL
+	str	r0, [r1]
+
+	/* Reading the PMC Status register to detect when the PLLA is locked */
+	mov	r6, #AT91_PMC_IXR_LOCKA
+MOSCS_Loop1:
+	ldr	r3, [r2]
+	and	r3, r6, r3
+	cmp	r3, #AT91_PMC_IXR_LOCKA
+	bne	MOSCS_Loop1
+
+/* ----------------------------------------------------------------------------
+ * PMC Init Step 3.
+ * ----------------------------------------------------------------------------
+ * - Switch on the Main Oscillator
+ * ----------------------------------------------------------------------------
+ */
+	ldr	r1, =(AT91_ASM_PMC_MCKR)
+
+	/* -Master Clock Controller register PMC_MCKR */
+	ldr	r0, =CONFIG_SYS_MCKR1_VAL
+	str	r0, [r1]
+
+	/* Reading the PMC Status to detect when the Master clock is ready */
+	mov	r6, #AT91_PMC_IXR_MCKRDY
+MCKRDY_Loop:
+	ldr	r3, [r2]
+	and	r3, r6, r3
+	cmp	r3, #AT91_PMC_IXR_MCKRDY
+	bne	MCKRDY_Loop
+
+	ldr	r0, =CONFIG_SYS_MCKR2_VAL
+	str	r0, [r1]
+
+	/* Reading the PMC Status to detect when the Master clock is ready */
+	mov	r6, #AT91_PMC_IXR_MCKRDY
+MCKRDY_Loop1:
+	ldr	r3, [r2]
+	and	r3, r6, r3
+	cmp	r3, #AT91_PMC_IXR_MCKRDY
+	bne	MCKRDY_Loop1
+PLL_setup_end:
+
+/* ----------------------------------------------------------------------------
+ * - memory control configuration 2
+ * ----------------------------------------------------------------------------
+ */
+	ldr	r0, =(AT91_ASM_SDRAMC_TR)
+	ldr	r1, [r0]
+	cmp	r1, #0
+	bne	SDRAM_setup_end
+
+	ldr	r0, =SMRDATA1
+	ldr	r2, =SMRDATA2
+	add	r0, r0, r5
+	add	r2, r2, r5
+2:
+	/* the address */
+	ldr	r1, [r0], #4
+	/* the value */
+	ldr	r3, [r0], #4
+	str	r3, [r1]
+	cmp	r2, r0
+	bne	2b
+
+SDRAM_setup_end:
+	/* everything is fine now */
+	mov	pc, lr
+
+	.ltorg
+
+SMRDATA:
+	.word AT91_ASM_WDT_MR
+	.word CONFIG_SYS_WDTC_WDMR_VAL
+	/* configure PIOx as EBI0 D[16-31] */
+#if defined(CONFIG_AT91SAM9263)
+	.word AT91_ASM_PIOD_PDR
+	.word CONFIG_SYS_PIOD_PDR_VAL1
+	.word AT91_ASM_PIOD_PUDR
+	.word CONFIG_SYS_PIOD_PPUDR_VAL
+	.word AT91_ASM_PIOD_ASR
+	.word CONFIG_SYS_PIOD_PPUDR_VAL
+#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) \
+	|| defined(CONFIG_AT91SAM9G20)
+	.word AT91_ASM_PIOC_PDR
+	.word CONFIG_SYS_PIOC_PDR_VAL1
+	.word AT91_ASM_PIOC_PUDR
+	.word CONFIG_SYS_PIOC_PPUDR_VAL
+#endif
+	.word AT91_ASM_MATRIX_CSA0
+	.word CONFIG_SYS_MATRIX_EBICSA_VAL
+
+	/* flash */
+	.word AT91_ASM_SMC_MODE0
+	.word CONFIG_SYS_SMC0_MODE0_VAL
+
+	.word AT91_ASM_SMC_CYCLE0
+	.word CONFIG_SYS_SMC0_CYCLE0_VAL
+
+	.word AT91_ASM_SMC_PULSE0
+	.word CONFIG_SYS_SMC0_PULSE0_VAL
+
+	.word AT91_ASM_SMC_SETUP0
+	.word CONFIG_SYS_SMC0_SETUP0_VAL
+
+SMRDATA1:
+	.word AT91_ASM_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL1
+	.word AT91_ASM_SDRAMC_TR
+	.word CONFIG_SYS_SDRC_TR_VAL1
+	.word AT91_ASM_SDRAMC_CR
+	.word CONFIG_SYS_SDRC_CR_VAL
+	.word AT91_ASM_SDRAMC_MDR
+	.word CONFIG_SYS_SDRC_MDR_VAL
+	.word AT91_ASM_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL2
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL1
+	.word AT91_ASM_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL3
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL2
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL3
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL4
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL5
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL6
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL7
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL8
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL9
+	.word AT91_ASM_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL4
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL10
+	.word AT91_ASM_SDRAMC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL5
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL11
+	.word AT91_ASM_SDRAMC_TR
+	.word CONFIG_SYS_SDRC_TR_VAL2
+	.word CONFIG_SYS_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL12
+	/* User reset enable*/
+	.word AT91_ASM_RSTC_MR
+	.word CONFIG_SYS_RSTC_RMR_VAL
+#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP
+	/* MATRIX_MCFG - REMAP all masters */
+	.word AT91_ASM_MATRIX_MCFG
+	.word 0x1FF
+#endif
+SMRDATA2:
+	.word 0
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/reset.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/reset.c
new file mode 100644
index 000000000..6acbfa330
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/reset.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_rstc.h>
+
+/* Reset the cpu by telling the reset controller to do so */
+void reset_cpu(void)
+{
+	at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
+	writel(AT91_RSTC_KEY
+		| AT91_RSTC_CR_PROCRST	/* Processor Reset */
+		| AT91_RSTC_CR_PERRST	/* Peripheral Reset */
+#ifdef CONFIG_AT91RESET_EXTRST
+		| AT91_RSTC_CR_EXTRST	/* External Reset (assert nRST pin) */
+#endif
+		, &rstc->cr);
+	/* never reached */
+	while (1)
+		;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/sam9x60_devices.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/sam9x60_devices.c
new file mode 100644
index 000000000..e3d3dd880
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/sam9x60_devices.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+unsigned int get_chip_id(void)
+{
+	/* The 0x40 is the offset of cidr in DBGU */
+	return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK;
+}
+
+unsigned int get_extension_chip_id(void)
+{
+	/* The 0x44 is the offset of exid in DBGU */
+	return readl(ATMEL_BASE_DBGU + 0x44);
+}
+
+unsigned int has_emac1(void)
+{
+	return cpu_is_sam9x60();
+}
+
+unsigned int has_emac0(void)
+{
+	return cpu_is_sam9x60();
+}
+
+unsigned int has_lcdc(void)
+{
+	return cpu_is_sam9x60();
+}
+
+char *get_cpu_name(void)
+{
+	unsigned int extension_id = get_extension_chip_id();
+
+	if (cpu_is_sam9x60()) {
+		switch (extension_id) {
+		case ARCH_EXID_SAM9X60:
+			return "SAM9X60";
+		case ARCH_EXID_SAM9X60_D6K:
+			return "SAM9X60 8MiB SDRAM SiP";
+		case ARCH_EXID_SAM9X60_D5M:
+			return "SAM9X60 64MiB DDR2 SiP";
+		case ARCH_EXID_SAM9X60_D1G:
+			return "SAM9X60 128MiB DDR2 SiP";
+		default:
+			return "Unknown CPU type";
+		}
+	} else {
+		return "Unknown CPU type";
+	}
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 1);	/* DRXD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 1);	/* DTXD */
+
+	at91_periph_clk_enable(ATMEL_ID_DBGU);
+}
+
+void at91_mci_hw_init(void)
+{
+	/* Initialize the SDMMC0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 1);	/* CLK */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 1);	/* CMD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 1);	/* DAT0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 1);	/* DAT1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 1);	/* DAT2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 1);	/* DAT3 */
+
+	at91_periph_clk_enable(ATMEL_ID_SDMMC0);
+}
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	if (has_emac0()) {
+		/* Enable EMAC0 clock */
+		at91_periph_clk_enable(ATMEL_ID_EMAC0);
+		/* EMAC0 pins setup */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 4, 0);	/* ETXCK */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 3, 0);	/* ERXDV */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* ERX0 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 1, 0);	/* ERX1 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* ERXER */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0);	/* ETXEN */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0);	/* ETX0 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 10, 0);	/* ETX1 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 5, 0);	/* EMDIO */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0);	/* EMDC */
+	}
+
+	if (has_emac1()) {
+		/* Enable EMAC1 clock */
+		at91_periph_clk_enable(ATMEL_ID_EMAC1);
+		/* EMAC1 pins setup */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 29, 0);	/* ETXCK */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 28, 0);	/* ECRSDV */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 20, 0);	/* ERXO */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 21, 0);	/* ERX1 */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 16, 0);	/* ERXER */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 27, 0);	/* ETXEN */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 18, 0);	/* ETX0 */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 19, 0);	/* ETX1 */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 31, 0);	/* EMDIO */
+		at91_pio3_set_b_periph(AT91_PIO_PORTC, 30, 0);	/* EMDC */
+	}
+
+#ifndef CONFIG_RMII
+	/* Only emac0 support MII */
+	if (has_emac0()) {
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* ECRS */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0);	/* ECOL */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* ERX2 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 14, 0);	/* ERX3 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 15, 0);	/* ERXCK */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 11, 0);	/* ETX2 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* ETX3 */
+		at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0);	/* ETXER */
+	}
+#endif
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/timer.c b/roms/u-boot/arch/arm/mach-at91/arm926ejs/timer.c
new file mode 100644
index 000000000..a8cf0e4bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/timer.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/clk.h>
+#include <div64.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by
+ * setting the 20 bit counter period to its maximum (0xfffff).
+ * (See the relevant data sheets to understand that this really works)
+ *
+ * We do also mimic the typical powerpc way of incrementing
+ * two 32 bit registers called tbl and tbu.
+ *
+ * Those registers increment at 1/16 the main clock rate.
+ */
+
+#define TIMER_LOAD_VAL	0xfffff
+
+/*
+ * Use the PITC in full 32 bit incrementing mode
+ */
+int timer_init(void)
+{
+	at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
+
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+
+	/* Enable PITC */
+	writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
+
+	gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
+
+	return 0;
+}
+
+/*
+ * Return the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds b/roms/u-boot/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
new file mode 100644
index 000000000..74f635522
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ */
+
+MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE, \
+		LENGTH = IMAGE_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+		__start = .;
+		*(.vectors)
+		arch/arm/cpu/arm926ejs/start.o	(.text*)
+		*(.text*)
+	} >.sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	. = ALIGN(4);
+	.u_boot_list : { KEEP(*(SORT(.u_boot_list*))) } > .sram
+
+	. = ALIGN(4);
+	__image_copy_end = .;
+
+	.end :
+	{
+		*(.__end)
+	} >.sram
+
+	_image_binary_end = .;
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} >.sdram
+}
+
+#if defined(IMAGE_MAX_SIZE)
+ASSERT(__image_copy_end - __start <= (IMAGE_MAX_SIZE), \
+	"SPL image too big");
+#endif
+
+#if defined(CONFIG_SPL_BSS_MAX_SIZE)
+ASSERT(__bss_end - __bss_start <= (CONFIG_SPL_BSS_MAX_SIZE), \
+	"SPL image BSS too big");
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/Makefile b/roms/u-boot/arch/arm/mach-at91/armv7/Makefile
new file mode 100644
index 000000000..f5b266595
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2013
+# Bo Shen <voice.shen@atmel.com>
+
+obj-$(CONFIG_SAMA5D2)	+= sama5d2_devices.o clock.o
+obj-$(CONFIG_SAMA5D3)	+= sama5d3_devices.o clock.o
+obj-$(CONFIG_SAMA5D4)	+= sama5d4_devices.o clock.o
+obj-$(CONFIG_SAMA7G5)	+= sama7g5_devices.o
+obj-y += cpu.o
+obj-y += reset.o
+ifneq ($(CONFIG_ATMEL_PIT_TIMER),y)
+ifneq ($(CONFIG_MCHP_PIT64B_TIMER),y)
+# old non-DM timer driver
+obj-y += timer.o
+endif
+endif
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/clock.c b/roms/u-boot/arch/arm/mach-at91/armv7/clock.c
new file mode 100644
index 000000000..aa6bb6bf3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/clock.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
+ *
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
+ * Copyright (C) 2015 Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#include <common.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static unsigned long at91_css_to_rate(unsigned long css)
+{
+	switch (css) {
+	case AT91_PMC_MCKR_CSS_SLOW:
+		return CONFIG_SYS_AT91_SLOW_CLOCK;
+	case AT91_PMC_MCKR_CSS_MAIN:
+		return gd->arch.main_clk_rate_hz;
+	case AT91_PMC_MCKR_CSS_PLLA:
+		return gd->arch.plla_rate_hz;
+	}
+
+	return 0;
+}
+
+static u32 at91_pll_rate(u32 freq, u32 reg)
+{
+	unsigned mul, div;
+
+	div = reg & 0xff;
+	mul = (reg >> 18) & 0x7f;
+	if (div && mul) {
+		freq /= div;
+		freq *= mul + 1;
+	} else {
+		freq = 0;
+	}
+
+	return freq;
+}
+
+int at91_clock_init(unsigned long main_clock)
+{
+	unsigned freq, mckr;
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+	unsigned tmp;
+	/*
+	 * When the bootloader initialized the main oscillator correctly,
+	 * there's no problem using the cycle counter.  But if it didn't,
+	 * or when using oscillator bypass mode, we must be told the speed
+	 * of the main clock.
+	 */
+	if (!main_clock) {
+		do {
+			tmp = readl(&pmc->mcfr);
+		} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
+		tmp &= AT91_PMC_MCFR_MAINF_MASK;
+		main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
+	}
+#endif
+	gd->arch.main_clk_rate_hz = main_clock;
+
+	/* report if PLLA is more than mildly overclocked */
+	gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+
+	/*
+	 * MCK and CPU derive from one of those primary clocks.
+	 * For now, assume this parentage won't change.
+	 */
+	mckr = readl(&pmc->mckr);
+
+	/* plla divisor by 2 */
+	if (mckr & (1 << 12))
+		gd->arch.plla_rate_hz >>= 1;
+
+	gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+	freq = gd->arch.mck_rate_hz;
+
+	/* prescale */
+	freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
+
+	switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
+	case AT91_PMC_MCKR_MDIV_2:
+		gd->arch.mck_rate_hz = freq / 2;
+		break;
+	case AT91_PMC_MCKR_MDIV_3:
+		gd->arch.mck_rate_hz = freq / 3;
+		break;
+	case AT91_PMC_MCKR_MDIV_4:
+		gd->arch.mck_rate_hz = freq / 4;
+		break;
+	default:
+		break;
+	}
+
+	gd->arch.cpu_clk_rate_hz = freq;
+
+	return 0;
+}
+
+void at91_plla_init(u32 pllar)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(pllar, &pmc->pllar);
+	while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
+		;
+}
+
+void at91_mck_init(u32 mckr)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = readl(&pmc->mckr);
+	tmp &= ~(AT91_PMC_MCKR_CSS_MASK  |
+		 AT91_PMC_MCKR_PRES_MASK |
+		 AT91_PMC_MCKR_MDIV_MASK |
+		 AT91_PMC_MCKR_PLLADIV_2);
+#ifdef CPU_HAS_H32MXDIV
+	tmp &= ~AT91_PMC_MCKR_H32MXDIV;
+#endif
+
+	tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK  |
+		       AT91_PMC_MCKR_PRES_MASK |
+		       AT91_PMC_MCKR_MDIV_MASK |
+		       AT91_PMC_MCKR_PLLADIV_2);
+#ifdef CPU_HAS_H32MXDIV
+	tmp |= mckr & AT91_PMC_MCKR_H32MXDIV;
+#endif
+
+	writel(tmp, &pmc->mckr);
+
+	while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+		;
+}
+
+/*
+ * For the Master Clock Controller Register(MCKR), while switching
+ * to a lower clock source, we must switch the clock source first
+ * instead of last. Otherwise, we could end up with too high frequency
+ * on the internal bus and peripherals.
+ */
+void at91_mck_init_down(u32 mckr)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = readl(&pmc->mckr);
+	tmp &= (~AT91_PMC_MCKR_CSS_MASK);
+	tmp |= (mckr & AT91_PMC_MCKR_CSS_MASK);
+	writel(tmp, &pmc->mckr);
+
+	while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+		;
+
+#ifdef CPU_HAS_H32MXDIV
+	tmp = readl(&pmc->mckr);
+	tmp &= (~AT91_PMC_MCKR_H32MXDIV);
+	tmp |= (mckr & AT91_PMC_MCKR_H32MXDIV);
+	writel(tmp, &pmc->mckr);
+#endif
+
+	tmp = readl(&pmc->mckr);
+	tmp &= (~AT91_PMC_MCKR_PLLADIV_MASK);
+	tmp |= (mckr & AT91_PMC_MCKR_PLLADIV_MASK);
+	writel(tmp, &pmc->mckr);
+
+	tmp = readl(&pmc->mckr);
+	tmp &= (~AT91_PMC_MCKR_MDIV_MASK);
+	tmp |= (mckr & AT91_PMC_MCKR_MDIV_MASK);
+	writel(tmp, &pmc->mckr);
+
+	tmp = readl(&pmc->mckr);
+	tmp &= (~AT91_PMC_MCKR_PRES_MASK);
+	tmp |= (mckr & AT91_PMC_MCKR_PRES_MASK);
+	writel(tmp, &pmc->mckr);
+}
+
+int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 regval, status;
+	u32 timeout = 1000;
+
+	if (id > AT91_PMC_PCR_PID_MASK)
+		return -EINVAL;
+
+	if (div > 0xff)
+		return -EINVAL;
+
+	if (clk_source == GCK_CSS_UPLL_CLK) {
+		if (at91_upll_clk_enable())
+			return -ENODEV;
+	}
+
+	writel(id, &pmc->pcr);
+	regval = readl(&pmc->pcr);
+	regval &= ~AT91_PMC_PCR_GCKCSS;
+	regval &= ~AT91_PMC_PCR_GCKDIV;
+
+	switch (clk_source) {
+	case GCK_CSS_SLOW_CLK:
+		regval |= AT91_PMC_PCR_GCKCSS_SLOW_CLK;
+		break;
+	case GCK_CSS_MAIN_CLK:
+		regval |= AT91_PMC_PCR_GCKCSS_MAIN_CLK;
+		break;
+	case GCK_CSS_PLLA_CLK:
+		regval |= AT91_PMC_PCR_GCKCSS_PLLA_CLK;
+		break;
+	case GCK_CSS_UPLL_CLK:
+		regval |= AT91_PMC_PCR_GCKCSS_UPLL_CLK;
+		break;
+	case GCK_CSS_MCK_CLK:
+		regval |= AT91_PMC_PCR_GCKCSS_MCK_CLK;
+		break;
+	case GCK_CSS_AUDIO_CLK:
+		regval |= AT91_PMC_PCR_GCKCSS_AUDIO_CLK;
+		break;
+	default:
+		printf("Error GCK clock source selection!\n");
+		return -EINVAL;
+	}
+
+	regval |= AT91_PMC_PCR_CMD_WRITE |
+		  AT91_PMC_PCR_GCKDIV_(div) |
+		  AT91_PMC_PCR_GCKEN;
+
+	writel(regval, &pmc->pcr);
+
+	do {
+		udelay(1);
+		status = readl(&pmc->sr);
+	} while ((!!(--timeout)) && (!(status & AT91_PMC_GCKRDY)));
+
+	if (!timeout)
+		printf("Timeout waiting for GCK ready!\n");
+
+	return 0;
+}
+
+u32 at91_get_periph_generated_clk(u32 id)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 regval, clk_source, div;
+	u32 freq;
+
+	if (id > AT91_PMC_PCR_PID_MASK)
+		return 0;
+
+	writel(id, &pmc->pcr);
+	regval = readl(&pmc->pcr);
+
+	clk_source = regval & AT91_PMC_PCR_GCKCSS;
+	switch (clk_source) {
+	case AT91_PMC_PCR_GCKCSS_SLOW_CLK:
+		freq = CONFIG_SYS_AT91_SLOW_CLOCK;
+		break;
+	case AT91_PMC_PCR_GCKCSS_MAIN_CLK:
+		freq = gd->arch.main_clk_rate_hz;
+		break;
+	case AT91_PMC_PCR_GCKCSS_PLLA_CLK:
+		freq = gd->arch.plla_rate_hz;
+		break;
+	case AT91_PMC_PCR_GCKCSS_UPLL_CLK:
+		freq = AT91_UTMI_PLL_CLK_FREQ;
+		break;
+	case AT91_PMC_PCR_GCKCSS_MCK_CLK:
+		freq = gd->arch.mck_rate_hz;
+		break;
+	default:
+		printf("Improper GCK clock source selection!\n");
+		freq = 0;
+		break;
+	}
+
+	div = ((regval & AT91_PMC_PCR_GCKDIV) >> AT91_PMC_PCR_GCKDIV_OFFSET);
+	div += 1;
+
+	return freq / div;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/cpu.c b/roms/u-boot/arch/arm/mach-at91/armv7/cpu.c
new file mode 100644
index 000000000..9b3753491
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/cpu.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ * (C) Copyright 2009
+ * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <vsprintf.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_gpbr.h>
+#include <asm/arch/clk.h>
+
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+#define CONFIG_SYS_AT91_MAIN_CLOCK 0
+#endif
+
+int arch_cpu_init(void)
+{
+#if defined(CONFIG_CLK_CCF)
+	return 0;
+#else
+	return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+#endif
+}
+
+void arch_preboot_os(void)
+{
+#if (IS_ENABLED(CONFIG_ATMEL_PIT_TIMER))
+	ulong cpiv;
+	at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+	cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir));
+
+	/*
+	 * Disable PITC
+	 * Add 0x1000 to current counter to stop it faster
+	 * without waiting for wrapping back to 0
+	 */
+	writel(cpiv + 0x1000, &pit->mr);
+#endif
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char buf[32];
+
+	printf("CPU: %s\n", get_cpu_name());
+	printf("Crystal frequency: %8s MHz\n",
+	       strmhz(buf, get_main_clk_rate()));
+	printf("CPU clock        : %8s MHz\n",
+	       strmhz(buf, get_cpu_clk_rate()));
+	printf("Master clock     : %8s MHz\n",
+	       strmhz(buf, get_mck_clk_rate()));
+
+	return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+	icache_enable();
+	dcache_enable();
+}
+
+#define ATMEL_CHIPID_CIDR_VERSION	0x1f
+
+unsigned int get_chip_id(void)
+{
+	return readl(ATMEL_CHIPID_CIDR) & ~ATMEL_CHIPID_CIDR_VERSION;
+}
+
+unsigned int get_extension_chip_id(void)
+{
+	return readl(ATMEL_CHIPID_EXID);
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/reset.c b/roms/u-boot/arch/arm/mach-at91/armv7/reset.c
new file mode 100644
index 000000000..1ea415ea9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/reset.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_rstc.h>
+
+/* Reset the cpu by telling the reset controller to do so */
+void reset_cpu(void)
+{
+	at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
+
+	writel(AT91_RSTC_KEY
+		| AT91_RSTC_CR_PROCRST	/* Processor Reset */
+		| AT91_RSTC_CR_PERRST	/* Peripheral Reset */
+#ifdef CONFIG_AT91RESET_EXTRST
+		| AT91_RSTC_CR_EXTRST	/* External Reset (assert nRST pin) */
+#endif
+		, &rstc->cr);
+	/* never reached */
+	do { } while (1);
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/sama5d2_devices.c b/roms/u-boot/arch/arm/mach-at91/armv7/sama5d2_devices.c
new file mode 100644
index 000000000..9e9d026c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/sama5d2_devices.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sama5d2.h>
+
+int _cpu_is_sama5d2(void)
+{
+	unsigned int chip_id = get_chip_id();
+
+	return ((chip_id == ARCH_ID_SAMA5D2) ||
+		(chip_id == ARCH_ID_SAMA5D2_SIP)) ? 1 : 0;
+}
+
+char *get_cpu_name(void)
+{
+	unsigned int chip_id = get_chip_id();
+	unsigned int extension_id = get_extension_chip_id();
+
+	if (chip_id == ARCH_ID_SAMA5D2) {
+		switch (extension_id) {
+		case ARCH_EXID_SAMA5D21CU:
+			return "SAMA5D21";
+		case ARCH_EXID_SAMA5D22CU:
+			return "SAMA5D22-CU";
+		case ARCH_EXID_SAMA5D22CN:
+			return "SAMA5D22-CN";
+		case ARCH_EXID_SAMA5D23CU:
+			return "SAMA5D23-CU";
+		case ARCH_EXID_SAMA5D24CX:
+			return "SAMA5D24-CX";
+		case ARCH_EXID_SAMA5D24CU:
+			return "SAMA5D24-CU";
+		case ARCH_EXID_SAMA5D26CU:
+			return "SAMA5D26-CU";
+		case ARCH_EXID_SAMA5D27CU:
+			return "SAMA5D27-CU";
+		case ARCH_EXID_SAMA5D27CN:
+			return "SAMA5D27-CN";
+		case ARCH_EXID_SAMA5D28CU:
+			return "SAMA5D28-CU";
+		case ARCH_EXID_SAMA5D28CN:
+			return "SAMA5D28-CN";
+		}
+	}
+
+	if ((chip_id == ARCH_ID_SAMA5D2) || (chip_id == ARCH_ID_SAMA5D2_SIP)) {
+		switch (extension_id) {
+		case ARCH_EXID_SAMA5D225C_D1M:
+			return "SAMA5D225 128M bits DDR2 SDRAM";
+		case ARCH_EXID_SAMA5D27C_D5M:
+			return "SAMA5D27 512M bits DDR2 SDRAM";
+		case ARCH_EXID_SAMA5D27C_D1G:
+			return "SAMA5D27 1G bits DDR2 SDRAM";
+		case ARCH_EXID_SAMA5D27C_LD1G:
+			return "SAMA5D27 1G bits LPDDR2 SDRAM";
+		case ARCH_EXID_SAMA5D27C_LD2G:
+			return "SAMA5D27 2G bits LPDDR2 SDRAM";
+		case ARCH_EXID_SAMA5D28C_D1G:
+			return "SAMA5D28 1G bits DDR2 SDRAM";
+		case ARCH_EXID_SAMA5D28C_LD1G:
+			return "SAMA5D28 1G bits LPDDR2 SDRAM";
+		case ARCH_EXID_SAMA5D28C_LD2G:
+			return "SAMA5D28 2G bits LPDDR2 SDRAM";
+		}
+	}
+
+	return "Unknown CPU type";
+}
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+void at91_udp_hw_init(void)
+{
+	at91_upll_clk_enable();
+
+	at91_periph_clk_enable(ATMEL_ID_UDPHS);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/sama5d3_devices.c b/roms/u-boot/arch/arm/mach-at91/armv7/sama5d3_devices.c
new file mode 100644
index 000000000..091059ea5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/sama5d3_devices.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012-2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ */
+
+#include <common.h>
+#include <asm/arch/sama5d3.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+unsigned int has_emac()
+{
+	return cpu_is_sama5d31() || cpu_is_sama5d35() || cpu_is_sama5d36();
+}
+
+unsigned int has_gmac()
+{
+	return !cpu_is_sama5d31();
+}
+
+unsigned int has_lcdc()
+{
+	return !cpu_is_sama5d35();
+}
+
+char *get_cpu_name()
+{
+	unsigned int extension_id = get_extension_chip_id();
+
+	if (cpu_is_sama5d3())
+		switch (extension_id) {
+		case ARCH_EXID_SAMA5D31:
+			return "SAMA5D31";
+		case ARCH_EXID_SAMA5D33:
+			return "SAMA5D33";
+		case ARCH_EXID_SAMA5D34:
+			return "SAMA5D34";
+		case ARCH_EXID_SAMA5D35:
+			return "SAMA5D35";
+		case ARCH_EXID_SAMA5D36:
+			return "SAMA5D36";
+		default:
+			return "Unknown CPU type";
+		}
+	else
+		return "Unknown CPU type";
+}
+
+void at91_serial0_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 18, 1);	/* TXD0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 0);	/* RXD0 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 29, 1);	/* TXD1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 28, 0);	/* RXD1 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_pio3_set_b_periph(AT91_PIO_PORTE, 26, 1);	/* TXD2 */
+	at91_pio3_set_b_periph(AT91_PIO_PORTE, 25, 0);	/* RXD2 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 31, 1);	/* DTXD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 30, 0);	/* DRXD */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_DBGU);
+}
+
+#if defined(CONFIG_ATMEL_SPI)
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0);       /* SPI0_MISO */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0);       /* SPI0_MOSI */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0);       /* SPI0_SPCK */
+
+	if (cs_mask & (1 << 0))
+		at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
+	if (cs_mask & (1 << 1))
+		at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
+	if (cs_mask & (1 << 2))
+		at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
+	if (cs_mask & (1 << 3))
+		at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 0);	/* MCI0 CMD */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 0);	/* MCI0 DA0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0);	/* MCI0 DA1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0);        /* MCI0 DA2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 4, 0);        /* MCI0 DA3 */
+#ifdef CONFIG_ATMEL_MCI_8BIT
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 5, 0);        /* MCI0 DA4 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 0);        /* MCI0 DA5 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 0);        /* MCI0 DA6 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 0);        /* MCI0 DA7 */
+#endif
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 0);        /* MCI0 CLK */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_MCI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* ETXCK_EREFCK */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0);	/* ERXDV */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* ERX0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* ERX1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* ERXER */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0);	/* ETXEN */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* ETX0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* ETX1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* EMDIO */
+	at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* EMDC */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_EMAC);
+}
+
+void at91_gmac_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* GTX0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 1, 0);	/* GTX1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* GTX2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 3, 0);	/* GTX3 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 4, 0);	/* GRX0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 5, 0);	/* GRX1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0);	/* GRX2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0);	/* GRX3 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0);	/* GTXCK */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0);	/* GTXEN */
+
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 11, 0);	/* GRXCK */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* GRXER */
+
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* GMDC */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0);	/* GMDIO */
+	at91_pio3_set_a_periph(AT91_PIO_PORTB, 18, 0);	/* G125CK */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_GMAC);
+}
+#endif
+
+#ifdef CONFIG_LCD
+void at91_lcd_hw_init(void)
+{
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0);	/* LCDPWM */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0);	/* LCDDISP */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0);	/* LCDVSYNC */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* LCDHSYNC */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0);	/* LCDDOTCK */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0);	/* LCDDEN */
+
+	/* The lower 16-bit of LCD only available on Port A */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  0, 0);	/* LCDD0 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  1, 0);	/* LCDD1 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  2, 0);	/* LCDD2 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  3, 0);	/* LCDD3 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  4, 0);	/* LCDD4 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  5, 0);	/* LCDD5 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  6, 0);	/* LCDD6 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  7, 0);	/* LCDD7 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  8, 0);	/* LCDD8 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA,  9, 0);	/* LCDD9 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* LCDD10 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* LCDD11 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* LCDD12 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* LCDD13 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* LCDD14 */
+	at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* LCDD15 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+void at91_udp_hw_init(void)
+{
+	/* Enable UPLL clock */
+	at91_upll_clk_enable();
+	/* Enable UDPHS clock */
+	at91_periph_clk_enable(ATMEL_ID_UDPHS);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/sama5d4_devices.c b/roms/u-boot/arch/arm/mach-at91/armv7/sama5d4_devices.c
new file mode 100644
index 000000000..e68ae9940
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/sama5d4_devices.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/at91_sfr.h>
+#include <asm/arch/sama5d4.h>
+
+char *get_cpu_name()
+{
+	unsigned int extension_id = get_extension_chip_id();
+
+	if (cpu_is_sama5d4())
+		switch (extension_id) {
+		case ARCH_EXID_SAMA5D41:
+			return "SAMA5D41";
+		case ARCH_EXID_SAMA5D42:
+			return "SAMA5D42";
+		case ARCH_EXID_SAMA5D43:
+			return "SAMA5D43";
+		case ARCH_EXID_SAMA5D44:
+			return "SAMA5D44";
+		default:
+			return "Unknown CPU type";
+		}
+	else
+		return "Unknown CPU type";
+}
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+void at91_udp_hw_init(void)
+{
+	/* Enable UPLL clock */
+	at91_upll_clk_enable();
+	/* Enable UDPHS clock */
+	at91_periph_clk_enable(ATMEL_ID_UDPHS);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/sama7g5_devices.c b/roms/u-boot/arch/arm/mach-at91/armv7/sama7g5_devices.c
new file mode 100644
index 000000000..a58f671f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/sama7g5_devices.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Microchip Technology, Inc.
+ *		      Eugen Hristev <eugen.hristev@microchip.com>
+ */
+
+char *get_cpu_name(void)
+{
+	return "SAMA7G5";
+}
+
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/timer.c b/roms/u-boot/arch/arm/mach-at91/armv7/timer.c
new file mode 100644
index 000000000..1f54c5dca
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/timer.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/clk.h>
+#include <div64.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * We're using the SAMA5D3x PITC in 32 bit mode, by
+ * setting the 20 bit counter period to its maximum (0xfffff).
+ * (See the relevant data sheets to understand that this really works)
+ *
+ * We do also mimic the typical powerpc way of incrementing
+ * two 32 bit registers called tbl and tbu.
+ *
+ * Those registers increment at 1/16 the main clock rate.
+ */
+
+#define TIMER_LOAD_VAL	0xfffff
+
+/*
+ * Use the PITC in full 32 bit incrementing mode
+ */
+int timer_init(void)
+{
+	at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+	/* Enable PITC Clock */
+	at91_periph_clk_enable(ATMEL_ID_PIT);
+
+	/* Enable PITC */
+	writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
+
+	gd->arch.timer_rate_hz = get_pit_clk_rate() / 16;
+
+	return 0;
+}
+
+/*
+ * Return the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/armv7/u-boot-spl.lds b/roms/u-boot/arch/arm/mach-at91/armv7/u-boot-spl.lds
new file mode 100644
index 000000000..950ea55d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/armv7/u-boot-spl.lds
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * (C) 2013 Atmel Corporation
+ *	    Bo Shen <voice.shen@atmel.com>
+ */
+
+MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE, \
+		LENGTH = IMAGE_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+		__start = .;
+		*(.vectors)
+		arch/arm/cpu/armv7/start.o	(.text*)
+		*(.text*)
+	} >.sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	. = ALIGN(4);
+	.u_boot_list : { KEEP(*(SORT(.u_boot_list*))) } > .sram
+
+	. = ALIGN(4);
+	__image_copy_end = .;
+
+	.end :
+	{
+		*(.__end)
+	} >.sram
+
+	_image_binary_end = .;
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} >.sdram
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/atmel_sfr.c b/roms/u-boot/arch/arm/mach-at91/atmel_sfr.c
new file mode 100644
index 000000000..b14222460
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/atmel_sfr.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#include <common.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/at91_sfr.h>
+
+#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D4)
+void redirect_int_from_saic_to_aic(void)
+{
+	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
+	u32 key32;
+
+	if (!(readl(&sfr->aicredir) & ATMEL_SFR_AICREDIR_NSAIC)) {
+		key32 = readl(&sfr->sn1) ^ ATMEL_SFR_AICREDIR_KEY;
+		writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir);
+	}
+}
+
+void configure_2nd_sram_as_l2_cache(void)
+{
+	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
+
+	writel(1, &sfr->l2cc_hramc);
+}
+#endif
+
+void configure_ddrcfg_input_buffers(bool open)
+{
+	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
+
+	if (open)
+		writel(ATMEL_SFR_DDRCFG_FDQIEN | ATMEL_SFR_DDRCFG_FDQSIEN,
+		       &sfr->ddrcfg);
+	else
+		writel(0, &sfr->ddrcfg);
+}
+
diff --git a/roms/u-boot/arch/arm/mach-at91/bootparams_atmel.S b/roms/u-boot/arch/arm/mach-at91/bootparams_atmel.S
new file mode 100644
index 000000000..45cd7a9f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/bootparams_atmel.S
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Atmel SAMA5Dx boot parameter handling
+ *
+ * Copyright (c) 2016 Marek Vasut <marex@denx.de>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/system.h>
+#include <linux/linkage.h>
+
+ENTRY(save_boot_params)
+	ldr	r0, =bootrom_stash
+	str	r4, [r0, #0]
+	b	save_boot_params_ret
+ENDPROC(save_boot_params)
diff --git a/roms/u-boot/arch/arm/mach-at91/clock.c b/roms/u-boot/arch/arm/mach-at91/clock.c
new file mode 100644
index 000000000..8344daeb3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/clock.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <wdt.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_wdt.h>
+
+#define EN_UPLL_TIMEOUT		500
+
+void at91_periph_clk_enable(int id)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+#ifdef CPU_HAS_PCR
+	u32 regval;
+	u32 div_value;
+
+	if (id > AT91_PMC_PCR_PID_MASK)
+		return;
+
+	writel(id, &pmc->pcr);
+
+	div_value = readl(&pmc->pcr) & AT91_PMC_PCR_DIV;
+
+	regval = AT91_PMC_PCR_EN | AT91_PMC_PCR_CMD_WRITE | id | div_value;
+
+	writel(regval, &pmc->pcr);
+#else
+	writel(0x01 << id, &pmc->pcer);
+#endif
+}
+
+void at91_periph_clk_disable(int id)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+#ifdef CPU_HAS_PCR
+	u32 regval;
+
+	if (id > AT91_PMC_PCR_PID_MASK)
+		return;
+
+	regval = AT91_PMC_PCR_CMD_WRITE | id;
+
+	writel(regval, &pmc->pcr);
+#else
+	writel(0x01 << id, &pmc->pcdr);
+#endif
+}
+
+void at91_system_clk_enable(int sys_clk)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(sys_clk, &pmc->scer);
+}
+
+void at91_system_clk_disable(int sys_clk)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(sys_clk, &pmc->scdr);
+}
+
+int at91_upll_clk_enable(void)
+{
+	struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+	ulong start_time, tmp_time;
+
+	if ((readl(&pmc->uckr) & AT91_PMC_UPLLEN) == AT91_PMC_UPLLEN)
+		return 0;
+
+	start_time = get_timer(0);
+	writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) {
+		tmp_time = get_timer(0);
+		if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) {
+			printf("ERROR: failed to enable UPLL\n");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+int at91_upll_clk_disable(void)
+{
+	struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+	ulong start_time, tmp_time;
+
+	start_time = get_timer(0);
+	writel(readl(&pmc->uckr) & ~AT91_PMC_UPLLEN, &pmc->uckr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) {
+		tmp_time = get_timer(0);
+		if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) {
+			printf("ERROR: failed to stop UPLL\n");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+void at91_usb_clk_init(u32 value)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(value, &pmc->usb);
+}
+
+void at91_pllicpr_init(u32 icpr)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(icpr, &pmc->pllicpr);
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/config.mk b/roms/u-boot/arch/arm/mach-at91/config.mk
new file mode 100644
index 000000000..542639465
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/config.mk
@@ -0,0 +1,9 @@
+ifeq ($(CONFIG_CPU_ARM926EJS),y)
+PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
+endif
+
+ifeq ($(CONFIG_CPU_V7A),y)
+ifndef CONFIG_SPL_BUILD
+INPUTS-y	+= u-boot.img
+endif
+endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_common.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_common.h
new file mode 100644
index 000000000..f7b411cf7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_common.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#ifndef AT91_COMMON_H
+#define AT91_COMMON_H
+
+void at91_can_hw_init(void);
+void at91_gmac_hw_init(void);
+void at91_macb_hw_init(void);
+void at91_mci_hw_init(void);
+void at91_serial0_hw_init(void);
+void at91_serial1_hw_init(void);
+void at91_serial2_hw_init(void);
+void at91_seriald_hw_init(void);
+void at91_spi0_hw_init(unsigned long cs_mask);
+void at91_spi1_hw_init(unsigned long cs_mask);
+void at91_udp_hw_init(void);
+void at91_uhp_hw_init(void);
+void at91_lcd_hw_init(void);
+void at91_plla_init(u32 pllar);
+void at91_pllb_init(u32 pllar);
+void at91_mck_init(u32 mckr);
+void at91_mck_init_down(u32 mckr);
+void at91_pmc_init(void);
+void mem_init(void);
+void at91_phy_reset(void);
+void at91_sdram_hw_init(void);
+void at91_mck_init(u32 mckr);
+void at91_spl_board_init(void);
+void at91_disable_wdt(void);
+void matrix_init(void);
+void redirect_int_from_saic_to_aic(void);
+void configure_2nd_sram_as_l2_cache(void);
+#ifdef CONFIG_ATMEL_SFR
+void configure_ddrcfg_input_buffers(bool open);
+#endif
+
+int at91_set_ethaddr(int offset);
+int at91_set_eth1addr(int offset);
+void at91_spi_nor_set_ethaddr(void);
+int at91_video_show_board_info(void);
+
+#endif /* AT91_COMMON_H */
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_dbu.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_dbu.h
new file mode 100644
index 000000000..91bb686bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_dbu.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Debug Unit
+ * Based on AT91SAM9XE datasheet
+ */
+
+#ifndef AT91_DBU_H
+#define AT91_DBU_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_dbu {
+	u32	cr;	/* Control Register WO */
+	u32	mr;	/* Mode Register  RW */
+	u32	ier;	/* Interrupt Enable Register WO */
+	u32	idr;	/* Interrupt Disable Register WO */
+	u32	imr;	/* Interrupt Mask Register RO */
+	u32	sr;	/* Status Register RO */
+	u32	rhr;	/* Receive Holding Register RO */
+	u32	thr;	/* Transmit Holding Register WO */
+	u32	brgr;	/* Baud Rate Generator Register RW */
+	u32	res1[7];/* 0x0024 - 0x003C Reserved */
+	u32	cidr;	/* Chip ID Register RO */
+	u32	exid;	/* Chip ID Extension Register RO */
+	u32	fnr;	/* Force NTRST Register RW */
+} at91_dbu_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_DBU_CID_ARCH_MASK		0x0ff00000
+#define AT91_DBU_CID_ARCH_9xx		0x01900000
+#define AT91_DBU_CID_ARCH_9XExx	0x02900000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_eefc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_eefc.h
new file mode 100644
index 000000000..e7bb2bfec
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_eefc.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Enhanced Embedded Flash Controller
+ * Based on AT91SAM9XE datasheet
+ */
+
+#ifndef AT91_EEFC_H
+#define AT91_EEFC_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_eefc {
+	u32	fmr;	/* Flash Mode Register RW */
+	u32	fcr;	/* Flash Command Register WO */
+	u32	fsr;	/* Flash Status Register RO */
+	u32	frr;	/* Flash Result Register RO */
+} at91_eefc_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_EEFC_FMR_FWS_MASK	0x00000f00
+#define AT91_EEFC_FMR_FRDY_BIT	0x00000001
+
+#define AT91_EEFC_FCR_KEY		0x5a000000
+#define AT91_EEFC_FCR_FARG_MASK	0x00ffff00
+#define AT91_EEFC_FCR_FARG_SHIFT	8
+#define AT91_EEFC_FCR_FCMD_GETD	0x0
+#define AT91_EEFC_FCR_FCMD_WP		0x1
+#define AT91_EEFC_FCR_FCMD_WPL		0x2
+#define AT91_EEFC_FCR_FCMD_EWP		0x3
+#define AT91_EEFC_FCR_FCMD_EWPL	0x4
+#define AT91_EEFC_FCR_FCMD_EA		0x5
+#define AT91_EEFC_FCR_FCMD_SLB		0x8
+#define AT91_EEFC_FCR_FCMD_CLB		0x9
+#define AT91_EEFC_FCR_FCMD_GLB		0xA
+#define AT91_EEFC_FCR_FCMD_SGPB	0xB
+#define AT91_EEFC_FCR_FCMD_CGPB	0xC
+#define AT91_EEFC_FCR_FCMD_GGPB	0xD
+
+#define AT91_EEFC_FSR_FRDY	1
+#define AT91_EEFC_FSR_FCMDE	2
+#define AT91_EEFC_FSR_FLOCKE	4
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_emac.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_emac.h
new file mode 100644
index 000000000..44b943be3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_emac.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
+ *
+ * based on AT91RM9200 datasheet revision I (36. Ethernet MAC (EMAC))
+ */
+
+#ifndef AT91_H
+#define AT91_H
+
+typedef struct at91_emac {
+	u32	 ctl;
+	u32	 cfg;
+	u32	 sr;
+	u32	 tar;
+	u32	 tcr;
+	u32	 tsr;
+	u32	 rbqp;
+	u32	 reserved0;
+	u32	 rsr;
+	u32	 isr;
+	u32	 ier;
+	u32	 idr;
+	u32	 imr;
+	u32	 man;
+	u32	 reserved1[2];
+	u32	 fra;
+	u32	 scol;
+	u32	 mocl;
+	u32	 ok;
+	u32	 seqe;
+	u32	 ale;
+	u32	 dte;
+	u32	 lcol;
+	u32	 ecol;
+	u32	 cse;
+	u32	 tue;
+	u32	 cde;
+	u32	 elr;
+	u32	 rjb;
+	u32	 usf;
+	u32	 sqee;
+	u32	 drfc;
+	u32	 reserved2[3];
+	u32	 hsh;
+	u32	 hsl;
+	u32	 sa1l;
+	u32	 sa1h;
+	u32	 sa2l;
+	u32	 sa2h;
+	u32	 sa3l;
+	u32	 sa3h;
+	u32	 sa4l;
+	u32	 sa4h;
+} at91_emac_t;
+
+#define AT91_EMAC_CTL_LB	0x0001
+#define AT91_EMAC_CTL_LBL	0x0002
+#define AT91_EMAC_CTL_RE	0x0004
+#define AT91_EMAC_CTL_TE	0x0008
+#define AT91_EMAC_CTL_MPE	0x0010
+#define AT91_EMAC_CTL_CSR	0x0020
+#define AT91_EMAC_CTL_ISR	0x0040
+#define AT91_EMAC_CTL_WES	0x0080
+#define AT91_EMAC_CTL_BP	0x1000
+
+#define AT91_EMAC_CFG_SPD	0x0001
+#define AT91_EMAC_CFG_FD	0x0002
+#define AT91_EMAC_CFG_BR	0x0004
+#define AT91_EMAC_CFG_CAF	0x0010
+#define AT91_EMAC_CFG_NBC	0x0020
+#define AT91_EMAC_CFG_MTI	0x0040
+#define AT91_EMAC_CFG_UNI	0x0080
+#define AT91_EMAC_CFG_BIG	0x0100
+#define AT91_EMAC_CFG_EAE	0x0200
+#define AT91_EMAC_CFG_CLK_MASK	0xFFFFF3FF
+#define AT91_EMAC_CFG_MCLK_8	0x0000
+#define AT91_EMAC_CFG_MCLK_16	0x0400
+#define AT91_EMAC_CFG_MCLK_32	0x0800
+#define AT91_EMAC_CFG_MCLK_64	0x0C00
+#define AT91_EMAC_CFG_RTY	0x1000
+#define AT91_EMAC_CFG_RMII	0x2000
+
+#define AT91_EMAC_SR_LINK	0x0001
+#define AT91_EMAC_SR_MDIO	0x0002
+#define AT91_EMAC_SR_IDLE	0x0004
+
+#define AT91_EMAC_TCR_LEN(x)	(x & 0x7FF)
+#define AT91_EMAC_TCR_NCRC	0x8000
+
+#define AT91_EMAC_TSR_OVR	0x0001
+#define AT91_EMAC_TSR_COL	0x0002
+#define AT91_EMAC_TSR_RLE	0x0004
+#define AT91_EMAC_TSR_TXIDLE	0x0008
+#define AT91_EMAC_TSR_BNQ	0x0010
+#define AT91_EMAC_TSR_COMP	0x0020
+#define AT91_EMAC_TSR_UND	0x0040
+
+#define AT91_EMAC_RSR_BNA	0x0001
+#define AT91_EMAC_RSR_REC	0x0002
+#define AT91_EMAC_RSR_OVR	0x0004
+
+/*  ISR, IER, IDR, IMR use the same bits */
+#define AT91_EMAC_IxR_DONE	0x0001
+#define AT91_EMAC_IxR_RCOM	0x0002
+#define AT91_EMAC_IxR_RBNA	0x0004
+#define AT91_EMAC_IxR_TOVR	0x0008
+#define AT91_EMAC_IxR_TUND	0x0010
+#define AT91_EMAC_IxR_RTRY	0x0020
+#define AT91_EMAC_IxR_TBRE	0x0040
+#define AT91_EMAC_IxR_TCOM	0x0080
+#define AT91_EMAC_IxR_TIDLE	0x0100
+#define AT91_EMAC_IxR_LINK	0x0200
+#define AT91_EMAC_IxR_ROVR	0x0400
+#define AT91_EMAC_IxR_HRESP	0x0800
+
+#define AT91_EMAC_MAN_DATA_MASK		0xFFFF
+#define AT91_EMAC_MAN_CODE_802_3	0x00020000
+#define AT91_EMAC_MAN_REGA(reg)		((reg & 0x1F) << 18)
+#define AT91_EMAC_MAN_PHYA(phy)		((phy & 0x1F) << 23)
+#define AT91_EMAC_MAN_RW_R		0x20000000
+#define AT91_EMAC_MAN_RW_W		0x10000000
+#define AT91_EMAC_MAN_HIGH		0x40000000
+#define AT91_EMAC_MAN_LOW		0x80000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_gpbr.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_gpbr.h
new file mode 100644
index 000000000..ac1bb1cf0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_gpbr.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * General Purpose Backup Registers
+ * Based on AT91SAM9XE datasheet
+ */
+
+#ifndef AT91_GPBR_H
+#define AT91_GPBR_H
+
+/*
+ * The Atmel AT91SAM9 series has a small resource of 4 nonvolatile
+ * 32 Bit registers (buffered by the Vbu power).
+ *
+ * Please consider carefully before using this resource for tasks
+ * that do not really need nonvolatile registers. Maybe you can
+ * store information in EEPROM or FLASH instead.
+ *
+ * However, if you use a GPBR please document its use here and
+ * reference the define in your code!
+ *
+ * known typical uses of the GPBRs:
+ * GPBR[0]: offset for RTT timekeeping (u-boot, kernel)
+ * GPBR[1]: unused
+ * GPBR[2]: unused
+ * GPBR[3]: bootcount (u-boot)
+ */
+#define AT91_GPBR_INDEX_TIMEOFF 0
+#define AT91_GPBR_INDEX_BOOTCOUNT 3
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_gpbr {
+	u32 reg[4];
+} at91_gpbr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_matrix.h
new file mode 100644
index 000000000..d98fcf510
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_matrix.h
@@ -0,0 +1,239 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
+ */
+
+#ifndef AT91_MATRIX_H
+#define AT91_MATRIX_H
+
+#ifdef __ASSEMBLY__
+
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
+#define AT91_ASM_MATRIX_CSA0	(ATMEL_BASE_MATRIX + 0x11C)
+#elif defined(CONFIG_AT91SAM9261)
+#define AT91_ASM_MATRIX_CSA0	(ATMEL_BASE_MATRIX + 0x30)
+#elif defined(CONFIG_AT91SAM9263)
+#define AT91_ASM_MATRIX_CSA0	(ATMEL_BASE_MATRIX + 0x120)
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#define AT91_ASM_MATRIX_CSA0	(ATMEL_BASE_MATRIX + 0x128)
+#else
+#error AT91_ASM_MATRIX_CSA0 is not definied for current CPU
+#endif
+
+#define AT91_ASM_MATRIX_MCFG	ATMEL_BASE_MATRIX
+
+#else
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
+#define AT91_MATRIX_MASTERS	6
+#define AT91_MATRIX_SLAVES	5
+#elif defined(CONFIG_AT91SAM9261)
+#define AT91_MATRIX_MASTERS	1
+#define AT91_MATRIX_SLAVES	5
+#elif defined(CONFIG_AT91SAM9263)
+#define AT91_MATRIX_MASTERS	9
+#define AT91_MATRIX_SLAVES	7
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#define AT91_MATRIX_MASTERS	11
+#define AT91_MATRIX_SLAVES	8
+#else
+#error CPU not supported. Please update at91_matrix.h
+#endif
+
+typedef struct at91_priority {
+	u32	a;
+	u32	b;
+} at91_priority_t;
+
+typedef struct at91_matrix {
+	u32		mcfg[AT91_MATRIX_MASTERS];
+#if defined(CONFIG_AT91SAM9261)
+	u32		scfg[AT91_MATRIX_SLAVES];
+	u32		res61_1[3];
+	u32		tcr;
+	u32		res61_2[2];
+	u32		csa;
+	u32		pucr;
+	u32		res61_3[114];
+#else
+	u32		reserve1[16 - AT91_MATRIX_MASTERS];
+	u32		scfg[AT91_MATRIX_SLAVES];
+	u32		reserve2[16 - AT91_MATRIX_SLAVES];
+	at91_priority_t	pr[AT91_MATRIX_SLAVES];
+	u32		reserve3[32 - (2 * AT91_MATRIX_SLAVES)];
+	u32		mrcr;		/* 0x100 Master Remap Control */
+	u32		reserve4[3];
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	u32		ccr[52];	/* 0x110 - 0x1E0 Chip Configuration */
+	u32		womr;		/* 0x1E4 Write Protect Mode  */
+	u32		wpsr;		/* 0x1E8 Write Protect Status */
+	u32		resg45_1[10];
+#elif defined(CONFIG_AT91SAM9260)  || defined(CONFIG_AT91SAM9G20)
+	u32		res60_1[3];
+	u32		csa;
+	u32		res60_2[56];
+#elif defined(CONFIG_AT91SAM9263)
+	u32		res63_1;
+	u32		tcmr;
+	u32		res63_2[2];
+	u32		csa[2];
+	u32		res63_3[54];
+#else
+	u32		reserve5[60];
+#endif
+#endif
+} at91_matrix_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_CSA_DBPUC		0x00000100
+#define AT91_MATRIX_CSA_VDDIOMSEL_1_8V	0x00000000
+#define AT91_MATRIX_CSA_VDDIOMSEL_3_3V	0x00010000
+
+#define AT91_MATRIX_CSA_EBI_CS1A	0x00000002
+#define AT91_MATRIX_CSA_EBI_CS3A	0x00000008
+#define AT91_MATRIX_CSA_EBI_CS4A	0x00000010
+#define AT91_MATRIX_CSA_EBI_CS5A	0x00000020
+
+#define AT91_MATRIX_CSA_EBI1_CS2A	0x00000008
+
+#if defined CONFIG_AT91SAM9261
+/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define	AT91_MATRIX_MCFG_RCB0	(1 << 0)
+/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define	AT91_MATRIX_MCFG_RCB1	(1 << 1)
+#endif
+
+/* Undefined Length Burst Type */
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#define AT91_MATRIX_MCFG_ULBT_INFINITE	0x00000000
+#define AT91_MATRIX_MCFG_ULBT_SINGLE	0x00000001
+#define AT91_MATRIX_MCFG_ULBT_FOUR	0x00000002
+#define AT91_MATRIX_MCFG_ULBT_EIGHT	0x00000003
+#define AT91_MATRIX_MCFG_ULBT_SIXTEEN	0x00000004
+#endif
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#define AT91_MATRIX_MCFG_ULBT_THIRTYTWO	0x00000005
+#define AT91_MATRIX_MCFG_ULBT_SIXTYFOUR	0x00000006
+#define AT91_MATRIX_MCFG_ULBT_128	0x00000007
+#endif
+
+/* Default Master Type */
+#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_NONE	0x00000000
+#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_LAST	0x00010000
+#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED	0x00020000
+
+/* Fixed Index of Default Master */
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9263) || \
+	defined(CONFIG_AT91SAM9M10G45)
+#define	AT91_MATRIX_SCFG_FIXED_DEFMSTR(x)	((x & 0xf) << 18)
+#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9260)
+#define	AT91_MATRIX_SCFG_FIXED_DEFMSTR(x)	((x & 7) << 18)
+#endif
+
+/* Maximum Number of Allowed Cycles for a Burst */
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#define	AT91_MATRIX_SCFG_SLOT_CYCLE(x)	((x & 0x1ff) << 0)
+#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) || \
+	defined(CONFIG_AT91SAM9263)
+#define	AT91_MATRIX_SCFG_SLOT_CYCLE(x)	((x & 0xff) << 0)
+#endif
+
+/* Arbitration Type */
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263)
+#define	AT91_MATRIX_SCFG_ARBT_ROUND_ROBIN	0x00000000
+#define	AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY	0x01000000
+#endif
+
+/* Master Remap Control Register */
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define	AT91_MATRIX_MRCR_RCB0	(1 << 0)
+/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define	AT91_MATRIX_MRCR_RCB1	(1 << 1)
+#endif
+#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G45) || \
+	defined(CONFIG_AT91SAM9M10G45)
+#define	AT91_MATRIX_MRCR_RCB2	0x00000004
+#define	AT91_MATRIX_MRCR_RCB3	0x00000008
+#define	AT91_MATRIX_MRCR_RCB4	0x00000010
+#define	AT91_MATRIX_MRCR_RCB5	0x00000020
+#define	AT91_MATRIX_MRCR_RCB6	0x00000040
+#define	AT91_MATRIX_MRCR_RCB7	0x00000080
+#define	AT91_MATRIX_MRCR_RCB8	0x00000100
+#endif
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#define	AT91_MATRIX_MRCR_RCB9	0x00000200
+#define	AT91_MATRIX_MRCR_RCB10	0x00000400
+#define	AT91_MATRIX_MRCR_RCB11	0x00000800
+#endif
+
+/* TCM Configuration Register */
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+/* Size of ITCM enabled memory block */
+#define	AT91_MATRIX_TCMR_ITCM_0		0x00000000
+#define	AT91_MATRIX_TCMR_ITCM_32	0x00000040
+/* Size of DTCM enabled memory block */
+#define	AT91_MATRIX_TCMR_DTCM_0		0x00000000
+#define	AT91_MATRIX_TCMR_DTCM_32	0x00000060
+#define	AT91_MATRIX_TCMR_DTCM_64	0x00000070
+/* Wait state TCM register */
+#define	AT91_MATRIX_TCMR_TCM_NO_WS	0x00000000
+#define	AT91_MATRIX_TCMR_TCM_ONE_WS	0x00000800
+#endif
+#if defined(CONFIG_AT91SAM9263)
+/* Size of ITCM enabled memory block */
+#define	AT91_MATRIX_TCMR_ITCM_0		0x00000000
+#define	AT91_MATRIX_TCMR_ITCM_16	0x00000005
+#define	AT91_MATRIX_TCMR_ITCM_32	0x00000006
+/* Size of DTCM enabled memory block */
+#define	AT91_MATRIX_TCMR_DTCM_0		0x00000000
+#define	AT91_MATRIX_TCMR_DTCM_16	0x00000050
+#define	AT91_MATRIX_TCMR_DTCM_32	0x00000060
+#endif
+#if defined(CONFIG_AT91SAM9261)
+/* Size of ITCM enabled memory block */
+#define	AT91_MATRIX_TCMR_ITCM_0		0x00000000
+#define	AT91_MATRIX_TCMR_ITCM_16	0x00000005
+#define	AT91_MATRIX_TCMR_ITCM_32	0x00000006
+#define	AT91_MATRIX_TCMR_ITCM_64	0x00000007
+/* Size of DTCM enabled memory block */
+#define	AT91_MATRIX_TCMR_DTCM_0		0x00000000
+#define	AT91_MATRIX_TCMR_DTCM_16	0x00000050
+#define	AT91_MATRIX_TCMR_DTCM_32	0x00000060
+#define	AT91_MATRIX_TCMR_DTCM_64	0x00000070
+#endif
+
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+/* Video Mode Configuration Register */
+#define	AT91C_MATRIX_VDEC_SEL_OFF	0x00000000
+#define	AT91C_MATRIX_VDEC_SEL_ON	0x00000001
+/* Write Protect Mode Register */
+#define	AT91_MATRIX_WPMR_WP_WPDIS	0x00000000
+#define	AT91_MATRIX_WPMR_WP_WPEN	0x00000001
+#define	AT91_MATRIX_WPMR_WPKEY		0xFFFFFF00	/* Write Protect KEY */
+/* Write Protect Status Register */
+#define	AT91_MATRIX_WPSR_NO_WPV		0x00000000
+#define	AT91_MATRIX_WPSR_WPV		0x00000001
+#define	AT91_MATRIX_WPSR_WPVSRC		0x00FFFF00	/* Write Protect Violation Source */
+#endif
+
+/* USB Pad Pull-Up Control Register */
+#if defined(CONFIG_AT91SAM9261)
+#define	AT91_MATRIX_USBPUCR_PUON	0x40000000
+#endif
+
+#define AT91_MATRIX_PRA_M0(x)	((x & 3) << 0)	/* Master 0 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M1(x)	((x & 3) << 4)	/* Master 1 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M2(x)	((x & 3) << 8)	/* Master 2 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M3(x)	((x & 3) << 12)	/* Master 3 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M4(x)	((x & 3) << 16)	/* Master 4 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M5(x)	((x & 3) << 20)	/* Master 5 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M6(x)	((x & 3) << 24)	/* Master 6 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M7(x)	((x & 3) << 28)	/* Master 7 Priority Reg. A*/
+#define AT91_MATRIX_PRB_M8(x)	((x & 3) << 0)	/* Master 8 Priority Reg. B) */
+#define AT91_MATRIX_PRB_M9(x)	((x & 3) << 4)	/* Master 9 Priority Reg. B) */
+#define AT91_MATRIX_PRB_M10(x)	((x & 3) << 8)	/* Master 10 Priority Reg. B) */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_mc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_mc.h
new file mode 100644
index 000000000..18b0e163c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_mc.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
+ */
+
+#ifndef AT91_MC_H
+#define AT91_MC_H
+
+#define AT91_ASM_MC_EBI_CSA	(ATMEL_BASE_MC + 0x60)
+#define AT91_ASM_MC_EBI_CFG	(ATMEL_BASE_MC + 0x64)
+#define AT91_ASM_MC_SMC_CSR0	(ATMEL_BASE_MC + 0x70)
+#define AT91_ASM_MC_SDRAMC_MR	(ATMEL_BASE_MC + 0x90)
+#define AT91_ASM_MC_SDRAMC_TR	(ATMEL_BASE_MC + 0x94)
+#define AT91_ASM_MC_SDRAMC_CR	(ATMEL_BASE_MC + 0x98)
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_ebi {
+	u32 	csa;		/* 0x00 Chip Select Assignment Register */
+	u32	cfgr;		/* 0x04 Configuration Register */
+	u32	reserved[2];
+} at91_ebi_t;
+
+#define AT91_EBI_CSA_CS0A	0x0001
+#define AT91_EBI_CSA_CS1A	0x0002
+
+#define AT91_EBI_CSA_CS3A	0x0008
+#define AT91_EBI_CSA_CS4A	0x0010
+
+typedef struct at91_sdramc {
+	u32	mr; 	/* 0x00 SDRAMC Mode Register */
+	u32	tr; 	/* 0x04 SDRAMC Refresh Timer Register */
+	u32	cr; 	/* 0x08 SDRAMC Configuration Register */
+	u32	ssr; 	/* 0x0C SDRAMC Self Refresh Register */
+	u32	lpr; 	/* 0x10 SDRAMC Low Power Register */
+	u32	ier; 	/* 0x14 SDRAMC Interrupt Enable Register */
+	u32	idr; 	/* 0x18 SDRAMC Interrupt Disable Register */
+	u32	imr; 	/* 0x1C SDRAMC Interrupt Mask Register */
+	u32	icr; 	/* 0x20 SDRAMC Interrupt Status Register */
+	u32	reserved[3];
+} at91_sdramc_t;
+
+typedef struct at91_smc {
+	u32	csr[8]; 	/* 0x00 SDRAMC Mode Register */
+} at91_smc_t;
+
+#define AT91_SMC_CSR_RWHOLD(x)		((x & 0x7) << 28)
+#define AT91_SMC_CSR_RWSETUP(x)		((x & 0x7) << 24)
+#define AT91_SMC_CSR_ACSS_STANDARD	0x00000000
+#define AT91_SMC_CSR_ACSS_1CYCLE	0x00010000
+#define AT91_SMC_CSR_ACSS_2CYCLE	0x00020000
+#define AT91_SMC_CSR_ACSS_3CYCLE	0x00030000
+#define AT91_SMC_CSR_DRP		0x00008000
+#define AT91_SMC_CSR_DBW_8		0x00004000
+#define AT91_SMC_CSR_DBW_16		0x00002000
+#define AT91_SMC_CSR_BAT_8		0x00000000
+#define AT91_SMC_CSR_BAT_16		0x00001000
+#define AT91_SMC_CSR_TDF(x)		((x & 0xF) << 8)
+#define AT91_SMC_CSR_WSEN		0x00000080
+#define AT91_SMC_CSR_NWS(x)		(x & 0x7F)
+
+typedef struct at91_bfc {
+	u32	mr; 	/* 0x00 SDRAMC Mode Register */
+} at91_bfc_t;
+
+typedef struct at91_mc {
+	u32		rcr;		/* 0x00 MC Remap Control Register */
+	u32		asr;		/* 0x04 MC Abort Status Register */
+	u32		aasr;		/* 0x08 MC Abort Address Status Reg */
+	u32		mpr;		/* 0x0C MC Master Priority Register */
+	u32		reserved1[20];	/* 0x10-0x5C */
+	at91_ebi_t	ebi;		/* 0x60	- 0x6C EBI */
+	at91_smc_t	smc;		/* 0x70 - 0x8C SMC User Interface */
+	at91_sdramc_t	sdramc;		/* 0x90 - 0xBC SDRAMC User Interface */
+	at91_bfc_t	bfc;		/* 0xC0 BFC User Interface */
+	u32		reserved2[15];
+} at91_mc_t;
+
+#endif
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pdc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pdc.h
new file mode 100644
index 000000000..a855a7177
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pdc.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
+ */
+
+#ifndef AT91_PDC_H
+#define AT91_PDC_H
+
+typedef struct at91_pdc {
+	u32	rpr;		/* 0x100 Receive Pointer Register */
+	u32	rcr;		/* 0x104 Receive Counter Register */
+	u32	tpr;		/* 0x108 Transmit Pointer Register */
+	u32	tcr;		/* 0x10C Transmit Counter Register */
+	u32	pnpr;		/* 0x110 Receive Next Pointer Register */
+	u32	pncr;		/* 0x114 Receive Next Counter Register */
+	u32	tnpr;		/* 0x118 Transmit Next Pointer Register */
+	u32	tncr;		/* 0x11C Transmit Next Counter Register */
+	u32	ptcr;		/* 0x120 Transfer Control Register */
+	u32	ptsr;		/* 0x124 Transfer Status Register */
+} at91_pdc_t;
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pio.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pio.h
new file mode 100644
index 000000000..f51e47e55
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+
+#define AT91_ASM_PIO_RANGE	0x200
+#define AT91_ASM_PIOC_ASR	\
+	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x70)
+#define AT91_ASM_PIOC_BSR	\
+	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x74)
+#define AT91_ASM_PIOC_PDR	\
+	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x04)
+#define AT91_ASM_PIOC_PUDR	\
+	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x60)
+
+#define AT91_ASM_PIOD_PDR	\
+	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x04)
+#define AT91_ASM_PIOD_PUDR	\
+	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x60)
+#define AT91_ASM_PIOD_ASR	\
+	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x70)
+
+#define PIO_SCDR_DIV		0x3fff	/* Slow Clock Divider Selection for Debouncing Mask */
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_port {
+	u32	per;		/* 0x00 PIO Enable Register */
+	u32	pdr;		/* 0x04 PIO Disable Register */
+	u32	psr;		/* 0x08 PIO Status Register */
+	u32	reserved0;
+	u32	oer;		/* 0x10 Output Enable Register */
+	u32	odr;		/* 0x14 Output Disable Registerr */
+	u32	osr;		/* 0x18 Output Status Register */
+	u32	reserved1;
+	u32	ifer;		/* 0x20 Input Filter Enable Register */
+	u32	ifdr;		/* 0x24 Input Filter Disable Register */
+	u32	ifsr;		/* 0x28 Input Filter Status Register */
+	u32	reserved2;
+	u32	sodr;		/* 0x30 Set Output Data Register */
+	u32	codr;		/* 0x34 Clear Output Data Register */
+	u32	odsr;		/* 0x38 Output Data Status Register */
+	u32	pdsr;		/* 0x3C Pin Data Status Register */
+	u32	ier;		/* 0x40 Interrupt Enable Register */
+	u32	idr;		/* 0x44 Interrupt Disable Register */
+	u32	imr;		/* 0x48 Interrupt Mask Register */
+	u32	isr;		/* 0x4C Interrupt Status Register */
+	u32	mder;		/* 0x50 Multi-driver Enable Register */
+	u32	mddr;		/* 0x54 Multi-driver Disable Register */
+	u32	mdsr;		/* 0x58 Multi-driver Status Register */
+	u32	reserved3;
+	u32	pudr;		/* 0x60 Pull-up Disable Register */
+	u32	puer;		/* 0x64 Pull-up Enable Register */
+	u32	pusr;		/* 0x68 Pad Pull-up Status Register */
+	u32	reserved4;
+	union {
+		struct {
+			u32	abcdsr1;	/* 0x70 Peripheral ABCD Select Register 1 */
+			u32	abcdsr2;	/* 0x74 Peripheral ABCD Select Register 2 */
+			u32	reserved5[2];
+			u32	ifscdr;		/* 0x80 Input Filter SCLK Disable Register */
+			u32	ifscer;		/* 0x84 Input Filter SCLK Enable Register */
+			u32	ifscsr;		/* 0x88 Input Filter SCLK Status Register */
+			u32	scdr;		/* 0x8C SCLK Divider Debouncing Register */
+			u32	ppddr;		/* 0x90 Pad Pull-down Disable Register */
+			u32	ppder;		/* 0x94 Pad Pull-down Enable Register */
+			u32	ppdsr;		/* 0x98 Pad Pull-down Status Register */
+			u32	reserved6;	/*  */
+		} pio3;
+
+		struct {
+			u32	asr;		/* 0x70 Select A Register */
+			u32	bsr;		/* 0x74 Select B Register */
+			u32	absr;		/* 0x78 AB Select Status Register */
+			u32	reserved5[9];	/*  */
+		} pio2;
+	} mux;
+
+	u32	ower;		/* 0xA0 Output Write Enable Register */
+	u32	owdr;		/* 0xA4 Output Write Disable Register */
+	u32	owsr;		/* OxA8 Output Write Status Register */
+	u32	reserved7;	/*  */
+	u32	aimer;		/* 0xB0 Additional INT Modes Enable Register */
+	u32	aimdr;		/* 0xB4 Additional INT Modes Disable Register */
+	u32	aimmr;		/* 0xB8 Additional INT Modes Mask Register */
+	u32	reserved8;	/* */
+	u32	esr;		/* 0xC0 Edge Select Register */
+	u32	lsr;		/* 0xC4 Level Select Register */
+	u32	elsr;		/* 0xC8 Edge/Level Status Register */
+	u32	reserved9;	/* 0xCC */
+	u32	fellsr;		/* 0xD0 Falling /Low Level Select Register */
+	u32	rehlsr;		/* 0xD4 Rising /High Level Select Register */
+	u32	frlhsr;		/* 0xD8 Fall/Rise - Low/High Status Register */
+	u32	reserved10;	/* */
+	u32	locksr;		/* 0xE0 Lock Status */
+	u32	wpmr;		/* 0xE4 Write Protect Mode Register */
+	u32	wpsr;		/* 0xE8 Write Protect Status Register */
+	u32	reserved11[5];	/* */
+	u32	schmitt;	/* 0x100 Schmitt Trigger Register */
+	u32	reserved12[4];	/* 0x104 ~ 0x110 */
+	u32	driver1;	/* 0x114 I/O Driver Register1(AT91SAM9x5's driver1) */
+	u32	driver12;	/* 0x118 I/O Driver Register12(AT91SAM9x5's driver2 or SAMA5D3x's driver1 ) */
+	u32	driver2;	/* 0x11C I/O Driver Register2(SAMA5D3x's driver2) */
+	u32	reserved13[12];	/* 0x120 ~ 0x14C */
+} at91_port_t;
+
+typedef union at91_pio {
+	struct {
+		at91_port_t	pioa;
+		at91_port_t	piob;
+		at91_port_t	pioc;
+		at91_port_t	piod;	/* not present in all hardware */
+		at91_port_t	pioe;/* not present in all hardware */
+	};
+	at91_port_t port[5];
+} at91_pio_t;
+
+#ifdef CONFIG_AT91_GPIO
+int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup);
+int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on);
+int at91_set_pio_output(unsigned port, unsigned pin, int value);
+int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup);
+int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on);
+int at91_set_pio_value(unsigned port, unsigned pin, int value);
+int at91_get_pio_value(unsigned port, unsigned pin);
+
+int at91_pio3_set_a_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_b_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_c_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_d_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div);
+int at91_pio3_set_pio_pullup(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_pio_pulldown(unsigned port, unsigned pin, int is_on);
+int at91_pio3_set_pio_disable_schmitt_trig(unsigned port, unsigned pin);
+#endif
+#endif
+
+#define	AT91_PIO_PORTA		0x0
+#define	AT91_PIO_PORTB		0x1
+#define	AT91_PIO_PORTC		0x2
+#define	AT91_PIO_PORTD		0x3
+#define	AT91_PIO_PORTE		0x4
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pit.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pit.h
new file mode 100644
index 000000000..dfaf2e026
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pit.h]
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+typedef struct at91_pit {
+	u32	mr;	/* 0x00 Mode Register */
+	u32	sr;	/* 0x04 Status Register */
+	u32	pivr;	/* 0x08 Periodic Interval Value Register */
+	u32	piir;	/* 0x0C Periodic Interval Image Register */
+} at91_pit_t;
+
+#define		AT91_PIT_MR_IEN		0x02000000
+#define		AT91_PIT_MR_EN		0x01000000
+#define		AT91_PIT_MR_PIV_MASK(x)	(x & 0x000fffff)
+#define		AT91_PIT_MR_PIV(x)	(x & AT91_PIT_MR_PIV_MASK)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pmc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pmc.h
new file mode 100644
index 000000000..2ce99d956
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -0,0 +1,269 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel arch/arm/mach-at91/include/mach/at91_pmc.h]
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#ifdef __ASSEMBLY__
+
+#define	AT91_ASM_PMC_MOR	(ATMEL_BASE_PMC + 0x20)
+#define	AT91_ASM_PMC_PLLAR	(ATMEL_BASE_PMC + 0x28)
+#define	AT91_ASM_PMC_PLLBR	(ATMEL_BASE_PMC + 0x2c)
+#define AT91_ASM_PMC_MCKR	(ATMEL_BASE_PMC + 0x30)
+#define AT91_ASM_PMC_SR		(ATMEL_BASE_PMC + 0x68)
+
+#else
+
+#include <asm/types.h>
+#include <linux/bitops.h>
+
+typedef struct at91_pmc {
+	u32	scer;		/* 0x00 System Clock Enable Register */
+	u32	scdr;		/* 0x04 System Clock Disable Register */
+	u32	scsr;		/* 0x08 System Clock Status Register */
+	u32	reserved0;
+	u32	pcer;		/* 0x10 Peripheral Clock Enable Register */
+	u32	pcdr;		/* 0x14 Peripheral Clock Disable Register */
+	u32	pcsr;		/* 0x18 Peripheral Clock Status Register */
+	u32	uckr;		/* 0x1C UTMI Clock Register */
+	u32	mor;		/* 0x20 Main Oscilator Register */
+	u32	mcfr;		/* 0x24 Main Clock Frequency Register */
+	u32	pllar;		/* 0x28 PLL A Register */
+	u32	pllbr;		/* 0x2C PLL B Register */
+	u32	mckr;		/* 0x30 Master Clock Register */
+	u32	reserved1;
+	u32	usb;		/* 0x38 USB Clock Register */
+	u32	reserved2;
+	u32	pck[4];		/* 0x40 Programmable Clock Register 0 - 3 */
+	u32	reserved3[4];
+	u32	ier;		/* 0x60 Interrupt Enable Register */
+	u32	idr;		/* 0x64 Interrupt Disable Register */
+	u32	sr;		/* 0x68 Status Register */
+	u32	imr;		/* 0x6C Interrupt Mask Register */
+	u32	reserved4[4];
+	u32	pllicpr;	/* 0x80 Change Pump Current Register (SAM9) */
+	u32	reserved5[24];
+	u32	wpmr;		/* 0xE4 Write Protect Mode Register (CAP0) */
+	u32	wpsr;		/* 0xE8 Write Protect Status Register (CAP0) */
+	u32	reserved6[5];
+	u32	pcer1;		/* 0x100 Periperial Clock Enable Register 1 */
+	u32	pcdr1;		/* 0x104 Periperial Clock Disable Register 1 */
+	u32	pcsr1;		/* 0x108 Periperial Clock Status Register 1 */
+	u32	pcr;		/* 0x10c Periperial Control Register */
+	u32	ocr;		/* 0x110 Oscillator Calibration Register */
+} at91_pmc_t;
+
+#endif	/* end not assembly */
+
+#define AT91_PMC_MOR_MOSCEN		0x01
+#define AT91_PMC_MOR_OSCBYPASS		0x02
+#define AT91_PMC_MOR_MOSCRCEN		0x08
+#define AT91_PMC_MOR_OSCOUNT(x)		(((x) & 0xff) << 8)
+#define AT91_PMC_MOR_KEY(x)		(((x) & 0xff) << 16)
+#define AT91_PMC_MOR_MOSCSEL		(1 << 24)
+
+#define AT91_PMC_PLLXR_DIV(x)		((x) & 0xFF)
+#define AT91_PMC_PLLXR_PLLCOUNT(x)	(((x) & 0x3F) << 8)
+#define AT91_PMC_PLLXR_OUT(x)		(((x) & 0x03) << 14)
+#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
+	defined(CONFIG_SAMA5D4)
+#define AT91_PMC_PLLXR_MUL(x)		(((x) & 0x7F) << 18)
+#else
+#define AT91_PMC_PLLXR_MUL(x)		(((x) & 0x7FF) << 16)
+#endif
+#define AT91_PMC_PLLAR_29		0x20000000
+#define AT91_PMC_PLLBR_USBDIV_1		0x00000000
+#define AT91_PMC_PLLBR_USBDIV_2		0x10000000
+#define AT91_PMC_PLLBR_USBDIV_4		0x20000000
+
+#define AT91_PMC_MCFR_MAINRDY		0x00010000
+#define AT91_PMC_MCFR_MAINF_MASK	0x0000FFFF
+#define AT91_PMC_MCFR_RCMEAS		0x00100000
+#define AT91_PMC_MCFR_CCSS_XTAL_OSC	0x01000000
+
+#define AT91_PMC_MCKR_CSS_SLOW		0x00000000
+#define AT91_PMC_MCKR_CSS_MAIN		0x00000001
+#define AT91_PMC_MCKR_CSS_PLLA		0x00000002
+#define AT91_PMC_MCKR_CSS_PLLB		0x00000003
+#define AT91_PMC_MCKR_CSS_MASK		0x00000003
+
+#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
+	defined(CONFIG_SAMA5D4) || \
+	defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
+#define AT91_PMC_MCKR_PRES_1		0x00000000
+#define AT91_PMC_MCKR_PRES_2		0x00000010
+#define AT91_PMC_MCKR_PRES_4		0x00000020
+#define AT91_PMC_MCKR_PRES_8		0x00000030
+#define AT91_PMC_MCKR_PRES_16		0x00000040
+#define AT91_PMC_MCKR_PRES_32		0x00000050
+#define AT91_PMC_MCKR_PRES_64		0x00000060
+#define AT91_PMC_MCKR_PRES_MASK		0x00000070
+#else
+#define AT91_PMC_MCKR_PRES_1		0x00000000
+#define AT91_PMC_MCKR_PRES_2		0x00000004
+#define AT91_PMC_MCKR_PRES_4		0x00000008
+#define AT91_PMC_MCKR_PRES_8		0x0000000C
+#define AT91_PMC_MCKR_PRES_16		0x00000010
+#define AT91_PMC_MCKR_PRES_32		0x00000014
+#define AT91_PMC_MCKR_PRES_64		0x00000018
+#define AT91_PMC_MCKR_PRES_MASK		0x0000001C
+#endif
+
+#ifdef CONFIG_AT91RM9200
+#define AT91_PMC_MCKR_MDIV_1		0x00000000
+#define AT91_PMC_MCKR_MDIV_2		0x00000100
+#define AT91_PMC_MCKR_MDIV_3		0x00000200
+#define AT91_PMC_MCKR_MDIV_4		0x00000300
+#define AT91_PMC_MCKR_MDIV_MASK		0x00000300
+#else
+#define AT91_PMC_MCKR_MDIV_1		0x00000000
+#define AT91_PMC_MCKR_MDIV_2		0x00000100
+#define AT91_PMC_MCKR_MDIV_3		0x00000300
+#define AT91_PMC_MCKR_MDIV_4		0x00000200
+#define AT91_PMC_MCKR_MDIV_MASK		0x00000300
+#endif
+
+#define AT91_PMC_MCKR_PLLADIV_MASK	0x00003000
+#define AT91_PMC_MCKR_PLLADIV_1		0x00000000
+#define AT91_PMC_MCKR_PLLADIV_2		0x00001000
+
+#define AT91_PMC_MCKR_H32MXDIV		0x01000000
+
+#define AT91_PMC_IXR_MOSCS		0x00000001
+#define AT91_PMC_IXR_LOCKA		0x00000002
+#define AT91_PMC_IXR_LOCKB		0x00000004
+#define AT91_PMC_IXR_MCKRDY		0x00000008
+#define AT91_PMC_IXR_LOCKU		0x00000040
+#define AT91_PMC_IXR_PCKRDY0		0x00000100
+#define AT91_PMC_IXR_PCKRDY1		0x00000200
+#define AT91_PMC_IXR_PCKRDY2		0x00000400
+#define AT91_PMC_IXR_PCKRDY3		0x00000800
+#define AT91_PMC_IXR_MOSCSELS		0x00010000
+
+#define AT91_PMC_PCR_PID_MASK		(0x3f)
+#define AT91_PMC_PCR_GCKCSS		(0x7 << 8)
+#define AT91_PMC_PCR_GCKCSS_MASK	0x07
+#define AT91_PMC_PCR_GCKCSS_OFFSET	8
+#define AT91_PMC_PCR_GCKCSS_(x)		((x & 0x07) << 8)
+#define		AT91_PMC_PCR_GCKCSS_SLOW_CLK	(0x0 << 8)
+#define		AT91_PMC_PCR_GCKCSS_MAIN_CLK	(0x1 << 8)
+#define		AT91_PMC_PCR_GCKCSS_PLLA_CLK	(0x2 << 8)
+#define		AT91_PMC_PCR_GCKCSS_UPLL_CLK	(0x3 << 8)
+#define		AT91_PMC_PCR_GCKCSS_MCK_CLK	(0x4 << 8)
+#define		AT91_PMC_PCR_GCKCSS_AUDIO_CLK	(0x5 << 8)
+#define AT91_PMC_PCR_CMD_WRITE		(0x1 << 12)
+#define AT91_PMC_PCR_DIV		(0x3 << 16)
+#define AT91_PMC_PCR_GCKDIV		(0xff << 20)
+#define AT91_PMC_PCR_GCKDIV_MASK	0xff
+#define AT91_PMC_PCR_GCKDIV_OFFSET	20
+#define AT91_PMC_PCR_GCKDIV_(x)		((x & 0xff) << 20)
+#define AT91_PMC_PCR_EN			(0x1 << 28)
+#define AT91_PMC_PCR_GCKEN		(0x1 << 29)
+
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91_PMC_DDR		(1 <<  2)		/* DDR Clock */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
+#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
+
+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x] */
+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
+#define			AT91_PMC_USBDIV_1		(0 << 28)
+#define			AT91_PMC_USBDIV_2		(1 << 28)
+#define			AT91_PMC_USBDIV_4		(2 << 28)
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+#define		AT91_PMC_PLLA_WR_ERRATA	(1     << 29)		/* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */
+
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_2			(1 << 2)
+#define			AT91_PMC_PRES_4			(2 << 2)
+#define			AT91_PMC_PRES_8			(3 << 2)
+#define			AT91_PMC_PRES_16		(4 << 2)
+#define			AT91_PMC_PRES_32		(5 << 2)
+#define			AT91_PMC_PRES_64		(6 << 2)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
+#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
+#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
+#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9 only] */
+#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
+#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
+#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
+#define			AT91_PMC_PDIV_1			(0 << 12)
+#define			AT91_PMC_PDIV_2			(1 << 12)
+
+#define AT91_PMC_USB_USBS_MASK		0x1
+#define AT91_PMC_USB_USBS_OFFSET		0
+#define AT91_PMC_USB_USBS_(x)		(x & 0x1)
+#define		AT91_PMC_USBS_USB_PLLA		(0x0)		/* USB Clock Input is PLLA */
+#define		AT91_PMC_USBS_USB_UPLL		(0x1)		/* USB Clock Input is UPLL */
+#define		AT91_PMC_USBS_USB_PLLB		(0x1)		/* USB Clock Input is PLLB, AT91SAM9N12 only */
+#define AT91_PMC_USB_DIV_MASK		0xf
+#define AT91_PMC_USB_DIV_OFFSET		8
+#define AT91_PMC_USB_DIV_(x)		((x & 0xf) << 8)
+#define		AT91_PMC_USB_DIV_2		(0x1 <<  8)	/* USB Clock divided by 2 */
+#define		AT91_PMC_USBDIV_8		(0x7 <<  8)	/* USB Clock divided by 8 */
+#define		AT91_PMC_USBDIV_10		(0x9 <<  8)	/* USB Clock divided by 10 */
+
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_MOSCSELS	BIT(16)			/* Main Oscillator Selection Status */
+#define		AT91_PMC_MOSCRCS	BIT(17)			/* 12 MHz RC Oscillator Status */
+#define		AT91_PMC_GCKRDY		(1 << 24)
+#define		AT91_PMC_PROTKEY	0x504d4301	/* Activation Code */
+
+/* PLL Charge Pump Current Register (PMC_PLLICPR) */
+#define AT91_PMC_ICP_PLLA(x)		(((x) & 0x3) << 0)
+#define AT91_PMC_IPLL_PLLA(x)		(((x) & 0x7) << 8)
+#define AT91_PMC_ICP_PLLU(x)		(((x) & 0x3) << 16)
+#define AT91_PMC_IVCO_PLLU(x)		(((x) & 0x3) << 24)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rstc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rstc.h
new file mode 100644
index 000000000..11ffe4454
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_rstc.h]
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+/* Reset Controller Status Register */
+#define AT91_ASM_RSTC_SR	(ATMEL_BASE_RSTC + 0x04)
+#define AT91_ASM_RSTC_MR	(ATMEL_BASE_RSTC + 0x08)
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_rstc {
+	u32	cr;	/* Reset Controller Control Register */
+	u32	sr;	/* Reset Controller Status Register */
+	u32	mr;	/* Reset Controller Mode Register */
+} at91_rstc_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_RSTC_KEY		0xA5000000
+
+#define AT91_RSTC_CR_PROCRST	0x00000001
+#define AT91_RSTC_CR_PERRST	0x00000004
+#define AT91_RSTC_CR_EXTRST	0x00000008
+
+#define AT91_RSTC_MR_URSTEN	0x00000001
+#define AT91_RSTC_MR_URSTIEN	0x00000010
+#define AT91_RSTC_MR_ERSTL(x)	((x & 0xf) << 8)
+#define AT91_RSTC_MR_ERSTL_MASK	0x0000FF00
+
+#define AT91_RSTC_SR_NRSTL	0x00010000
+
+#define AT91_RSTC_RSTTYP		(7 << 8)	/* Reset Type */
+#define AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define AT91_RSTC_RSTTYP_WAKEUP	(1 << 8)
+#define AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define AT91_RSTC_RSTTYP_USER		(4 << 8)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rtc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rtc.h
new file mode 100644
index 000000000..19d75515e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+/* Control Register */
+#define AT91_RTC_CR		(ATMEL_BASE_RTC + 0x00)
+#define AT91_RTC_UPDTIM		(1 <<  0)	/* Update Request Time */
+#define AT91_RTC_UPDCAL		(1 <<  1)	/* Update Request Calendar */
+#define AT91_RTC_TIMEVSEL	(3 <<  8)	/* Time Event Selection */
+#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
+#define AT91_RTC_TIMEVSEL_HOUR	(1 << 8)
+#define AT91_RTC_TIMEVSEL_DAY24	(2 << 8)
+#define AT91_RTC_TIMEVSEL_DAY12	(3 << 8)
+#define AT91_RTC_CALEVSEL	(3 << 16)	/* Calendar Event Selection */
+#define AT91_RTC_CALEVSEL_WEEK	(0 << 16)
+#define AT91_RTC_CALEVSEL_MONTH	(1 << 16)
+#define AT91_RTC_CALEVSEL_YEAR	(2 << 16)
+
+#define AT91_RTC_MR		(ATMEL_BASE_RTC + 0x04)	/* Mode Register */
+#define AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+
+#define AT91_RTC_TIMR		(ATMEL_BASE_RTC + 0x08)	/* Time Register */
+#define AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
+#define AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
+#define AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
+#define AT91_RTC_AMPM		(1    << 22)		/* AM/PM */
+
+#define AT91_RTC_CALR		(ATMEL_BASE_RTC + 0x0c)	/* Calendar Register */
+#define AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
+#define AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
+#define AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
+#define AT91_RTC_DAY		(7    << 21)		/* Current Day */
+#define AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
+
+#define AT91_RTC_TIMALR		(ATMEL_BASE_RTC + 0x10)	/* Time Alarm */
+#define AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enab */
+#define AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enab */
+#define AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
+
+#define AT91_RTC_CALALR		(ATMEL_BASE_RTC + 0x14)	/* Calendar Alarm */
+#define AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
+#define AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
+
+#define AT91_RTC_SR		(ATMEL_BASE_RTC + 0x18)	/* Status Register */
+#define AT91_RTC_ACKUPD		(1 <<  0)		/* Ack for Update */
+#define AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
+#define AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
+#define AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
+#define AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
+
+#define AT91_RTC_SCCR		(ATMEL_BASE_RTC + 0x1c)	/* Status Clear Cmd */
+#define AT91_RTC_IER		(ATMEL_BASE_RTC + 0x20)	/* Interrupt Enable */
+#define AT91_RTC_IDR		(ATMEL_BASE_RTC + 0x24)	/* Interrupt Disable */
+#define AT91_RTC_IMR		(ATMEL_BASE_RTC + 0x28)	/* Interrupt Mask */
+
+#define AT91_RTC_VER		(ATMEL_BASE_RTC + 0x2c)	/* Valid Entry */
+#define AT91_RTC_NVTIM		(1 <<  0)		/* Non-valid Time */
+#define AT91_RTC_NVCAL		(1 <<  1)		/* Non-valid Calendar */
+#define AT91_RTC_NVTIMALR	(1 <<  2)		/* .. Time Alarm */
+#define AT91_RTC_NVCALALR	(1 <<  3)		/* .. Calendar Alarm */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rtt.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rtt.h
new file mode 100644
index 000000000..ba88c441e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Real-time Timer
+ * Based on AT91SAM9XE datasheet
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_rtt {
+	u32	mr;	/* Mode Register   RW 0x00008000 */
+	u32	ar;	/* Alarm Register  RW 0xFFFFFFFF */
+	u32	vr;	/* Value Register  RO 0x00000000 */
+	u32	sr;	/* Status Register RO 0x00000000 */
+} at91_rtt_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_RTT_MR_RTPRES	0x0000ffff
+#define AT91_RTT_MR_ALMIEN	0x00010000
+#define AT91_RTT_RTTINCIEN	0x00020000
+#define AT91_RTT_RTTRST	0x00040000
+
+#define AT91_RTT_SR_ALMS	0x00000001
+#define AT91_RTT_SR_RTTINC	0x00000002
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_sck.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_sck.h
new file mode 100644
index 000000000..3cf8a5673
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_sck.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#ifndef AT91_SCK_H
+#define AT91_SCK_H
+
+/*
+ * SCKCR flags
+ */
+#define AT91SAM9G45_SCKCR_RCEN	    (1 << 0)	/* RC Oscillator Enable */
+#define AT91SAM9G45_SCKCR_OSC32EN   (1 << 1)	/* 32kHz Oscillator Enable */
+#define AT91SAM9G45_SCKCR_OSC32BYP  (1 << 2)	/* 32kHz Oscillator Bypass */
+#define AT91SAM9G45_SCKCR_OSCSEL    (1 << 3)	/* Slow Clock Selector */
+#define		AT91SAM9G45_SCKCR_OSCSEL_RC	(0 << 3)
+#define		AT91SAM9G45_SCKCR_OSCSEL_32	(1 << 3)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_sfr.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_sfr.h
new file mode 100644
index 000000000..4517df41b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_sfr.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Special Function Register (SFR)
+ *
+ * Copyright (C) 2014 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ */
+
+#ifndef __AT91_SFR_H
+#define __AT91_SFR_H
+
+#include <linux/bitops.h>
+struct atmel_sfr {
+	u32 reserved1;	/* 0x00 */
+	union {
+		u32 ddrcfg;	/* 0x04: DDR Configuration Register */
+		u32 ebicsa;	/* 0x04: EBI Chip Select Register */
+	};
+	u32 reserved2;	/* 0x08 */
+	u32 reserved3;	/* 0x0c */
+	u32 ohciicr;	/* 0x10: OHCI Interrupt Configuration Register */
+	u32 ohciisr;	/* 0x14: OHCI Interrupt Status Register */
+	u32 reserved4[4];	/* 0x18 ~ 0x24 */
+	u32 secure;		/* 0x28: Security Configuration Register */
+	u32 reserved5[5];	/* 0x2c ~ 0x3c */
+	u32 ebicfg;		/* 0x40: EBI Configuration Register */
+	u32 reserved6[2];	/* 0x44 ~ 0x48 */
+	u32 sn0;		/* 0x4c */
+	u32 sn1;		/* 0x50 */
+	u32 aicredir;	/* 0x54 */
+	u32 l2cc_hramc;	/* 0x58 */
+};
+
+/* Register Mapping*/
+#define AT91_SFR_DDRCFG		0x04	/* DDR Configuration Register */
+#define AT91_SFR_CCFG_EBICSA	0x04	/* EBI Chip Select Register */
+/* 0x08 ~ 0x0c: Reserved */
+#define AT91_SFR_OHCIICR	0x10	/* OHCI INT Configuration Register */
+#define AT91_SFR_OHCIISR	0x14	/* OHCI INT Status Register */
+#define AT91_SFR_UTMICKTRIM	0x30	/* UTMI Clock Trimming Register */
+#define AT91_SFR_UTMISWAP	0x3c	/* UTMI DP/DM Pin Swapping Register */
+#define AT91_SFR_LS		0x7c	/* Light Sleep Register */
+#define AT91_SFR_I2SCLKSEL	0x90	/* I2SC Register */
+#define AT91_SFR_WPMR		0xe4	/* Write Protection Mode Register */
+
+/* Bit field in DDRCFG */
+#define ATMEL_SFR_DDRCFG_FDQIEN		0x00010000
+#define ATMEL_SFR_DDRCFG_FDQSIEN	0x00020000
+
+/* Bit field in EBICFG */
+#define AT91_SFR_EBICFG_DRIVE0		(0x3 << 0)
+#define AT91_SFR_EBICFG_DRIVE0_LOW		(0x0 << 0)
+#define AT91_SFR_EBICFG_DRIVE0_MEDIUM		(0x2 << 0)
+#define AT91_SFR_EBICFG_DRIVE0_HIGH		(0x3 << 0)
+#define AT91_SFR_EBICFG_PULL0		(0x3 << 2)
+#define AT91_SFR_EBICFG_PULL0_UP		(0x0 << 2)
+#define AT91_SFR_EBICFG_PULL0_NONE		(0x1 << 2)
+#define AT91_SFR_EBICFG_PULL0_DOWN		(0x3 << 2)
+#define AT91_SFR_EBICFG_SCH0		(0x1 << 4)
+#define AT91_SFR_EBICFG_SCH0_OFF		(0x0 << 4)
+#define AT91_SFR_EBICFG_SCH0_ON			(0x1 << 4)
+#define AT91_SFR_EBICFG_DRIVE1		(0x3 << 8)
+#define AT91_SFR_EBICFG_DRIVE1_LOW		(0x0 << 8)
+#define AT91_SFR_EBICFG_DRIVE1_MEDIUM		(0x2 << 8)
+#define AT91_SFR_EBICFG_DRIVE1_HIGH		(0x3 << 8)
+#define AT91_SFR_EBICFG_PULL1		(0x3 << 10)
+#define AT91_SFR_EBICFG_PULL1_UP		(0x0 << 10)
+#define AT91_SFR_EBICFG_PULL1_NONE		(0x1 << 10)
+#define AT91_SFR_EBICFG_PULL1_DOWN		(0x3 << 10)
+#define AT91_SFR_EBICFG_SCH1		(0x1 << 12)
+#define AT91_SFR_EBICFG_SCH1_OFF		(0x0 << 12)
+#define AT91_SFR_EBICFG_SCH1_ON			(0x1 << 12)
+
+/* Bit field in AICREDIR */
+#define ATMEL_SFR_AICREDIR_NSAIC	0x00000001
+
+/* Bit field in DDRCFG */
+#define ATMEL_SFR_DDRCFG_FDQIEN                0x00010000
+#define ATMEL_SFR_DDRCFG_FDQSIEN       0x00020000
+
+#define AT91_SFR_CCFG_EBI_CSA(cs, val)		((val) << (cs))
+#define AT91_SFR_CCFG_EBI_DBPUC			BIT(8)
+#define AT91_SFR_CCFG_EBI_DBPDC			BIT(9)
+#define AT91_SFR_CCFG_EBI_DRIVE_SAM9X60		BIT(16)
+#define AT91_SFR_CCFG_EBI_DRIVE			BIT(17)
+#define AT91_SFR_CCFG_DQIEN_F			BIT(20)
+#define AT91_SFR_CCFG_NFD0_ON_D16		BIT(24)
+#define AT91_SFR_CCFG_DDR_MP_EN			BIT(25)
+
+#define AT91_SFR_OHCIICR_RES(x)			BIT(x)
+#define AT91_SFR_OHCIICR_ARIE			BIT(4)
+#define AT91_SFR_OHCIICR_APPSTART		BIT(5)
+#define AT91_SFR_OHCIICR_USB_SUSP(x)		BIT(8 + (x))
+#define AT91_SFR_OHCIICR_UDPPUDIS		BIT(23)
+#define AT91_OHCIICR_USB_SUSPEND		GENMASK(10, 8)
+
+#define AT91_SFR_OHCIISR_RIS(x)			BIT(x)
+
+#define AT91_UTMICKTRIM_FREQ			GENMASK(1, 0)
+
+#define AT91_SFR_UTMISWAP_PORT(x)		BIT(x)
+
+#define AT91_SFR_LS_VALUE(x)			BIT(x)
+#define AT91_SFR_LS_MEM_POWER_GATING_ULP1_EN	BIT(16)
+
+#define AT91_SFR_WPMR_WPEN			BIT(0)
+#define AT91_SFR_WPMR_WPKEY_MASK		GENMASK(31, 8)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_spi.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_spi.h
new file mode 100644
index 000000000..ce7bbf276
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_spi.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_spi.h]
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#include <asm/arch/at91_pdc.h>
+
+typedef struct at91_spi {
+	u32		cr;		/* 0x00 Control Register */
+	u32		mr;		/* 0x04 Mode Register */
+	u32		rdr;		/* 0x08 Receive Data Register */
+	u32		tdr;		/* 0x0C Transmit Data Register */
+	u32		sr;		/* 0x10 Status Register */
+	u32		ier;		/* 0x14 Interrupt Enable Register */
+	u32		idr;		/* 0x18 Interrupt Disable Register */
+	u32		imr;		/* 0x1C Interrupt Mask Register */
+	u32		reserve1[4];
+	u32		csr[4];		/* 0x30 Chip Select Register 0-3 */
+	u32		reserve2[48];
+	at91_pdc_t	pdc;
+} at91_spi_t;
+
+#ifdef CONFIG_ATMEL_LEGACY
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#define AT91_SPI_RPR		0x0100			/* Receive Pointer Register */
+
+#define AT91_SPI_RCR		0x0104			/* Receive Counter Register */
+
+#define AT91_SPI_TPR		0x0108			/* Transmit Pointer Register */
+
+#define AT91_SPI_TCR		0x010c			/* Transmit Counter Register */
+
+#define AT91_SPI_RNPR		0x0110			/* Receive Next Pointer Register */
+
+#define AT91_SPI_RNCR		0x0114			/* Receive Next Counter Register */
+
+#define AT91_SPI_TNPR		0x0118			/* Transmit Next Pointer Register */
+
+#define AT91_SPI_TNCR		0x011c			/* Transmit Next Counter Register */
+
+#define AT91_SPI_PTCR		0x0120			/* PDC Transfer Control Register */
+#define		AT91_SPI_RXTEN		(0x1 << 0)		/* Receiver Transfer Enable */
+#define		AT91_SPI_RXTDIS		(0x1 << 1)		/* Receiver Transfer Disable */
+#define		AT91_SPI_TXTEN		(0x1 << 8)		/* Transmitter Transfer Enable */
+#define		AT91_SPI_TXTDIS		(0x1 << 9)		/* Transmitter Transfer Disable */
+
+#define AT91_SPI_PTSR		0x0124			/* PDC Transfer Status Register */
+
+#endif /* CONFIG_ATMEL_LEGACY */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_st.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_st.h
new file mode 100644
index 000000000..ec4658a39
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_st.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+typedef struct at91_st {
+
+	u32	cr;
+	u32	pimr;
+	u32	wdmr;
+	u32	rtmr;
+	u32	sr;
+	u32	ier;
+	u32	idr;
+	u32	imr;
+	u32	rtar;
+	u32	crtr;
+} at91_st_t ;
+
+#define AT91_ST_CR_WDRST	1
+
+#define AT91_ST_WDMR_WDV(x)	(x & 0xFFFF)
+#define AT91_ST_WDMR_RSTEN	0x00010000
+#define AT91_ST_WDMR_EXTEN 	0x00020000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_tc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_tc.h
new file mode 100644
index 000000000..eb6950ab2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_tc.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
+ */
+
+#ifndef AT91_TC_H
+#define AT91_TC_H
+
+typedef struct at91_tcc {
+	u32		ccr;	/* 0x00 Channel Control Register */
+	u32		cmr;	/* 0x04 Channel Mode Register */
+	u32		reserved1[2];
+	u32		cv;	/* 0x10 Counter Value */
+	u32		ra;	/* 0x14 Register A */
+	u32		rb;	/* 0x18 Register B */
+	u32		rc;	/* 0x1C Register C */
+	u32		sr;	/* 0x20 Status Register */
+	u32		ier;	/* 0x24 Interrupt Enable Register */
+	u32		idr;	/* 0x28 Interrupt Disable Register */
+	u32		imr;	/* 0x2C Interrupt Mask Register */
+	u32		reserved3[4];
+} at91_tcc_t;
+
+#define AT91_TC_CCR_CLKEN		0x00000001
+#define AT91_TC_CCR_CLKDIS		0x00000002
+#define AT91_TC_CCR_SWTRG		0x00000004
+
+#define AT91_TC_CMR_CPCTRG		0x00004000
+
+#define AT91_TC_CMR_TCCLKS_CLOCK1	0x00000000
+#define AT91_TC_CMR_TCCLKS_CLOCK2	0x00000001
+#define AT91_TC_CMR_TCCLKS_CLOCK3	0x00000002
+#define AT91_TC_CMR_TCCLKS_CLOCK4	0x00000003
+#define AT91_TC_CMR_TCCLKS_CLOCK5	0x00000004
+#define AT91_TC_CMR_TCCLKS_XC0		0x00000005
+#define AT91_TC_CMR_TCCLKS_XC1		0x00000006
+#define AT91_TC_CMR_TCCLKS_XC2		0x00000007
+
+typedef struct at91_tc {
+	at91_tcc_t	tc[3];	/* 0x00 TC Channel 0-2 */
+	u32		bcr;	/* 0xC0 TC Block Control Register */
+	u32		bmr;	/* 0xC4 TC Block Mode Register */
+} at91_tc_t;
+
+#define AT91_TC_BMR_TC0XC0S_TCLK0	0x00000000
+#define AT91_TC_BMR_TC0XC0S_NONE	0x00000001
+#define AT91_TC_BMR_TC0XC0S_TIOA1	0x00000002
+#define AT91_TC_BMR_TC0XC0S_TIOA2	0x00000003
+
+#define AT91_TC_BMR_TC1XC1S_TCLK1	0x00000000
+#define AT91_TC_BMR_TC1XC1S_NONE	0x00000004
+#define AT91_TC_BMR_TC1XC1S_TIOA0	0x00000008
+#define AT91_TC_BMR_TC1XC1S_TIOA2	0x0000000C
+
+#define AT91_TC_BMR_TC2XC2S_TCLK2	0x00000000
+#define AT91_TC_BMR_TC2XC2S_NONE	0x00000010
+#define AT91_TC_BMR_TC2XC2S_TIOA0	0x00000020
+#define AT91_TC_BMR_TC2XC2S_TIOA1	0x00000030
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91_wdt.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_wdt.h
new file mode 100644
index 000000000..8ef8e007d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel arch/arm/mach-at91/include/mach/at91_wdt.h]
+ *
+ * Copyright (C) 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2018 Microchip Technology Inc.
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#ifdef __ASSEMBLY__
+
+#define AT91_ASM_WDT_MR	(ATMEL_BASE_WDT +  0x04)
+
+#else
+
+typedef struct at91_wdt {
+	u32	cr;
+	u32	mr;
+	u32	sr;
+} at91_wdt_t;
+
+struct at91_wdt_priv {
+	void __iomem *regs;
+	u32 regval;
+};
+
+#endif
+
+/* Watchdog Control Register */
+#define AT91_WDT_CR			0x00
+#define AT91_WDT_CR_WDRSTT		1
+#define AT91_WDT_CR_KEY			0xa5000000	/* KEY Password */
+
+/* Watchdog Mode Register*/
+#define AT91_WDT_MR			0X04
+#define AT91_WDT_MR_WDV(x)		(x & 0xfff)
+#define AT91_WDT_MR_WDFIEN		0x00001000
+#define AT91_WDT_MR_WDRSTEN		0x00002000
+#define AT91_WDT_MR_WDRPROC		0x00004000
+#define AT91_WDT_MR_WDDIS		0x00008000
+#define AT91_WDT_MR_WDD(x)		((x & 0xfff) << 16)
+#define AT91_WDT_MR_WDDBGHLT		0x10000000
+#define AT91_WDT_MR_WDIDLEHLT		0x20000000
+
+/* Hardware timeout in seconds */
+#define WDT_MAX_TIMEOUT		16
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91rm9200.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91rm9200.h
new file mode 100644
index 000000000..309039347
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ */
+
+#ifndef __AT91RM9200_H__
+#define __AT91RM9200_H__
+
+/* Periperial Identifiers */
+
+#define ATMEL_ID_SYS	1	/* System Peripheral */
+#define ATMEL_ID_PIOA	2	/* PIO port A */
+#define ATMEL_ID_PIOB	3	/* PIO port B */
+#define ATMEL_ID_PIOC	4	/* PIO port C */
+#define ATMEL_ID_PIOD	5	/* PIO port D BGA only */
+#define ATMEL_ID_USART0	6	/* USART 0 */
+#define ATMEL_ID_USART1	7	/* USART 1 */
+#define ATMEL_ID_USART2	8	/* USART 2 */
+#define ATMEL_ID_USART3	9	/* USART 3 */
+#define ATMEL_ID_MCI	10	/* Multimedia Card Interface */
+#define ATMEL_ID_UDP	11	/* USB Device Port */
+#define ATMEL_ID_TWI	12	/* Two Wire Interface */
+#define ATMEL_ID_SPI	13	/* Serial Peripheral Interface */
+#define ATMEL_ID_SSC0	14	/* Synch. Serial Controller 0 */
+#define ATMEL_ID_SSC1	15	/* Synch. Serial Controller 1 */
+#define ATMEL_ID_SSC2	16	/* Synch. Serial Controller 2 */
+#define ATMEL_ID_TC0	17	/* Timer Counter 0 */
+#define ATMEL_ID_TC1	18	/* Timer Counter 1 */
+#define ATMEL_ID_TC2	19	/* Timer Counter 2 */
+#define ATMEL_ID_TC3	20	/* Timer Counter 3 */
+#define ATMEL_ID_TC4	21	/* Timer Counter 4 */
+#define ATMEL_ID_TC5	22	/* Timer Counter 5 */
+#define ATMEL_ID_UHP	23	/* OHCI USB Host Port */
+#define ATMEL_ID_EMAC	24	/* Ethernet MAC */
+#define ATMEL_ID_IRQ0	25	/* Advanced Interrupt Controller */
+#define ATMEL_ID_IRQ1	26	/* Advanced Interrupt Controller */
+#define ATMEL_ID_IRQ2	27	/* Advanced Interrupt Controller */
+#define ATMEL_ID_IRQ3	28	/* Advanced Interrupt Controller */
+#define ATMEL_ID_IRQ4	29	/* Advanced Interrupt Controller */
+#define ATMEL_ID_IRQ5	30	/* Advanced Interrupt Controller */
+#define ATMEL_ID_IRQ6	31	/* Advanced Interrupt Controller */
+
+#define ATMEL_USB_HOST_BASE	0x00300000
+
+#define ATMEL_BASE_TC		0xFFFA0000
+#define ATMEL_BASE_UDP		0xFFFB0000
+#define ATMEL_BASE_MCI		0xFFFB4000
+#define ATMEL_BASE_TWI		0xFFFB8000
+#define ATMEL_BASE_EMAC		0xFFFBC000
+#define ATMEL_BASE_USART	0xFFFC0000	/* 4x 0x4000 Offset */
+#define ATMEL_BASE_USART0	ATMEL_BASE_USART
+#define ATMEL_BASE_USART1	(ATMEL_BASE_USART + 0x4000)
+#define ATMEL_BASE_USART2	(ATMEL_BASE_USART + 0x8000)
+#define ATMEL_BASE_USART3	(ATMEL_BASE_USART + 0xC000)
+
+#define ATMEL_BASE_SCC		0xFFFD0000	/* 4x 0x4000 Offset */
+#define ATMEL_BASE_SPI		0xFFFE0000
+
+#define ATMEL_BASE_AIC		0xFFFFF000
+#define ATMEL_BASE_DBGU		0xFFFFF200
+#define ATMEL_BASE_PIO		0xFFFFF400	/* 4x 0x200 Offset */
+#define ATMEL_BASE_PIOA		0xFFFFF400
+#define ATMEL_BASE_PIOB		0xFFFFF600
+#define ATMEL_BASE_PIOC		0xFFFFF800
+#define ATMEL_BASE_PIOD		0xFFFFFA00
+#define ATMEL_BASE_PMC		0xFFFFFC00
+#define ATMEL_BASE_ST		0xFFFFFD00
+#define ATMEL_BASE_RTC		0xFFFFFE00
+#define ATMEL_BASE_MC		0xFFFFFF00
+
+#define AT91_PIO_BASE	ATMEL_BASE_PIO
+
+/* AT91RM9200 Periperial Multiplexing A */
+/* Port A */
+#define ATMEL_PMX_AA_EREFCK	0x00000080
+#define ATMEL_PMX_AA_ETXCK	0x00000080
+#define ATMEL_PMX_AA_ETXEN	0x00000100
+#define ATMEL_PMX_AA_ETX0	0x00000200
+#define ATMEL_PMX_AA_ETX1	0x00000400
+#define ATMEL_PMX_AA_ECRS	0x00000800
+#define ATMEL_PMX_AA_ECRSDV	0x00000800
+#define ATMEL_PMX_AA_ERX0	0x00001000
+#define ATMEL_PMX_AA_ERX1	0x00002000
+#define ATMEL_PMX_AA_ERXER	0x00004000
+#define ATMEL_PMX_AA_EMDC	0x00008000
+#define ATMEL_PMX_AA_EMDIO	0x00010000
+
+#define ATMEL_PMX_AA_TXD2	0x00800000
+
+#define ATMEL_PMX_AA_TWD	0x02000000
+#define ATMEL_PMX_AA_TWCK	0x04000000
+
+/* Port B */
+#define ATMEL_PMX_BA_ERXCK	0x00080000
+#define ATMEL_PMX_BA_ECOL	0x00040000
+#define ATMEL_PMX_BA_ERXDV	0x00020000
+#define ATMEL_PMX_BA_ERX3	0x00010000
+#define ATMEL_PMX_BA_ERX2	0x00008000
+#define ATMEL_PMX_BA_ETXER	0x00004000
+#define ATMEL_PMX_BA_ETX3	0x00002000
+#define ATMEL_PMX_BA_ETX2	0x00001000
+
+/* Port B */
+
+#define ATMEL_PMX_CA_BFCK	0x00000001
+#define ATMEL_PMX_CA_BFRDY	0x00000002
+#define ATMEL_PMX_CA_SMOE	0x00000002
+#define ATMEL_PMX_CA_BFAVD	0x00000004
+#define ATMEL_PMX_CA_BFBAA	0x00000008
+#define ATMEL_PMX_CA_SMWE	0x00000008
+#define ATMEL_PMX_CA_BFOE	0x00000010
+#define ATMEL_PMX_CA_BFWE	0x00000020
+#define ATMEL_PMX_CA_NWAIT	0x00000040
+#define ATMEL_PMX_CA_A23	0x00000080
+#define ATMEL_PMX_CA_A24	0x00000100
+#define ATMEL_PMX_CA_A25	0x00000200
+#define ATMEL_PMX_CA_CFRNW	0x00000200
+#define ATMEL_PMX_CA_NCS4	0x00000400
+#define ATMEL_PMX_CA_CFCS	0x00000400
+#define ATMEL_PMX_CA_NCS5	0x00000800
+#define ATMEL_PMX_CA_CFCE1	0x00001000
+#define ATMEL_PMX_CA_NCS6	0x00001000
+#define ATMEL_PMX_CA_CFCE2	0x00002000
+#define ATMEL_PMX_CA_NCS7	0x00002000
+#define ATMEL_PMX_CA_D16_31	0xFFFF0000
+
+#define ATMEL_PIO_PORTS		4	/* theese SoCs have 4 PIO */
+#define ATMEL_PMC_UHP		AT91RM9200_PMC_UHP
+
+#define CONFIG_SYS_ATMEL_CPU_NAME	"AT91RM9200"
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9260.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9260.h
new file mode 100644
index 000000000..2daeb4fef
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9260.h]
+ *
+ * (C) 2006 Andrew Victor
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * Definitions for the SoCs:
+ * AT91SAM9260, AT91SAM9G20, AT91SAM9XE
+ *
+ * Note that those SoCs are mostly software and pin compatible,
+ * therefore this file applies to all of them. Differences between
+ * those SoCs are concentrated at the end of this file.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Peripherals */
+#define ATMEL_ID_PIOA	2	/* Parallel IO Controller A */
+#define ATMEL_ID_PIOB	3	/* Parallel IO Controller B */
+#define ATMEL_ID_PIOC	4	/* Parallel IO Controller C */
+#define ATMEL_ID_ADC	5	/* Analog-to-Digital Converter */
+#define ATMEL_ID_USART0	6	/* USART 0 */
+#define ATMEL_ID_USART1	7	/* USART 1 */
+#define ATMEL_ID_USART2	8	/* USART 2 */
+#define ATMEL_ID_MCI	9	/* Multimedia Card Interface */
+#define ATMEL_ID_UDP	10	/* USB Device Port */
+#define ATMEL_ID_TWI0	11	/* Two-Wire Interface 0 */
+#define ATMEL_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+/* Reserved:		15 */
+/* Reserved:		16 */
+#define ATMEL_ID_TC0	17	/* Timer Counter 0 */
+#define ATMEL_ID_TC1	18	/* Timer Counter 1 */
+#define ATMEL_ID_TC2	19	/* Timer Counter 2 */
+#define ATMEL_ID_UHP	20	/* USB Host port */
+#define ATMEL_ID_EMAC0	21	/* Ethernet 0 */
+#define ATMEL_ID_ISI	22	/* Image Sensor Interface */
+#define ATMEL_ID_USART3	23	/* USART 3 */
+#define ATMEL_ID_USART4	24	/* USART 4 */
+/* USART5 or TWI1:	25 */
+#define ATMEL_ID_TC3	26	/* Timer Counter 3 */
+#define ATMEL_ID_TC4	27	/* Timer Counter 4 */
+#define ATMEL_ID_TC5	28	/* Timer Counter 5 */
+#define ATMEL_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define ATMEL_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define ATMEL_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_TCB0		0xfffa0000
+#define ATMEL_BASE_TC0		0xfffa0000
+#define ATMEL_BASE_TC1		0xfffa0040
+#define ATMEL_BASE_TC2		0xfffa0080
+#define ATMEL_BASE_UDP0		0xfffa4000
+#define ATMEL_BASE_MCI		0xfffa8000
+#define ATMEL_BASE_TWI0		0xfffac000
+#define ATMEL_BASE_USART0	0xfffb0000
+#define ATMEL_BASE_USART1	0xfffb4000
+#define ATMEL_BASE_USART2	0xfffb8000
+#define ATMEL_BASE_SSC0		0xfffbc000
+#define ATMEL_BASE_ISI0		0xfffc0000
+#define ATMEL_BASE_EMAC0	0xfffc4000
+#define ATMEL_BASE_SPI0		0xfffc8000
+#define ATMEL_BASE_SPI1		0xfffcc000
+#define ATMEL_BASE_USART3	0xfffd0000
+#define ATMEL_BASE_USART4	0xfffd4000
+/* USART5 or TWI1:		0xfffd8000 */
+#define ATMEL_BASE_TCB1		0xfffdc000
+#define ATMEL_BASE_TC3		0xfffdc000
+#define ATMEL_BASE_TC4		0xfffdc040
+#define ATMEL_BASE_TC5		0xfffdc080
+#define ATMEL_BASE_ADC		0xfffe0000
+/* Reserved:	0xfffe4000 - 0xffffe7ff */
+
+/*
+ * System Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_SYS		0xffffe800
+#define ATMEL_BASE_SDRAMC	0xffffea00
+#define ATMEL_BASE_SMC		0xffffec00
+#define ATMEL_BASE_MATRIX	0xffffee00
+#define ATMEL_BASE_CCFG         0xffffef14
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_DBGU		0xfffff200
+#define ATMEL_BASE_PIOA		0xfffff400
+#define ATMEL_BASE_PIOB		0xfffff600
+#define ATMEL_BASE_PIOC		0xfffff800
+/* EEFC:			0xfffffa00 */
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffd00
+#define ATMEL_BASE_SHDWN	0xfffffd10
+#define ATMEL_BASE_RTT		0xfffffd20
+#define ATMEL_BASE_PIT		0xfffffd30
+#define ATMEL_BASE_WDT		0xfffffd40
+/* GPBR(non-XE SoCs):		0xfffffd50 */
+/* GPBR(XE SoCs):		0xfffffd60 */
+/* Reserved:	0xfffffd70 - 0xffffffff */
+
+/*
+ * Internal Memory common on all these SoCs
+ */
+#define ATMEL_BASE_BOOT		0x00000000	/* Boot mapped area */
+#define ATMEL_BASE_ROM		0x00100000	/* Internal ROM base address */
+/* SRAM or FLASH:		0x00200000 */
+/* SRAM:			0x00300000 */
+/* Reserved:			0x00400000 */
+#define ATMEL_UHP_BASE		0x00500000	/* USB Host controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000	/* typically NOR */
+#define ATMEL_BASE_CS1		0x20000000	/* SDRAM */
+#define ATMEL_BASE_CS2		0x30000000
+#define ATMEL_BASE_CS3		0x40000000	/* typically NAND */
+#define ATMEL_BASE_CS4		0x50000000
+#define ATMEL_BASE_CS5		0x60000000
+#define ATMEL_BASE_CS6		0x70000000
+#define ATMEL_BASE_CS7		0x80000000
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfffffd3c
+
+/*
+ * Other misc defines
+ */
+#if !CONFIG_IS_ENABLED(DM_GPIO)
+#define ATMEL_PIO_PORTS		3		/* these SoCs have 3 PIO */
+#define ATMEL_BASE_PIO		ATMEL_BASE_PIOA
+#endif
+#define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
+
+/*
+ * SoC specific defines
+ */
+#if defined(CONFIG_AT91SAM9XE)
+# define ATMEL_CPU_NAME		"AT91SAM9XE"
+# define ATMEL_ID_TWI1		25	/* TWI 1 */
+# define ATMEL_BASE_FLASH	0x00200000	/* Internal FLASH */
+# define ATMEL_BASE_SRAM	0x00300000	/* Internal SRAM */
+# define ATMEL_BASE_TWI1	0xfffd8000
+# define ATMEL_BASE_EEFC	0xfffffa00
+# define ATMEL_BASE_GPBR	0xfffffd60
+#elif defined(CONFIG_AT91SAM9260)
+# define ATMEL_CPU_NAME		"AT91SAM9260"
+# define ATMEL_ID_USART5	25	/* USART 5 */
+# define ATMEL_BASE_SRAM0	0x00200000	/* Internal SRAM 0 */
+# define ATMEL_BASE_SRAM1	0x00300000	/* Internal SRAM 1 */
+# define ATMEL_BASE_USART5	0xfffd8000
+# define ATMEL_BASE_GPBR	0xfffffd50
+#elif defined(CONFIG_AT91SAM9G20)
+# define ATMEL_CPU_NAME		"AT91SAM9G20"
+# define ATMEL_ID_USART5	25	/* USART 5 */
+# define ATMEL_BASE_SRAM0	0x00200000	/* Internal SRAM 0 */
+# define ATMEL_BASE_SRAM1	0x00300000	/* Internal SRAM 1 */
+# define ATMEL_BASE_USART5	0xfffd8000
+# define ATMEL_BASE_GPBR	0xfffffd50
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
new file mode 100644
index 000000000..7271129f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9260_matrix.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines access to the matrix' maximum of
+ * 16 masters and 16 slaves.
+ * However, on the AT91SAM9260/9G20/9XE there exist only
+ * 6 Masters and 5 Slaves!
+ */
+struct at91_matrix {
+	u32	mcfg[16];	/* Master Configuration Registers */
+	u32	scfg[16];	/* Slave Configuration Registers */
+	u32	pras[16][2];	/* Priority Assignment Slave Registers */
+	u32	mrcr;		/* Master Remap Control Register */
+	u32	filler[0x06];
+	u32	ebicsa;		/* EBI Chip Select Assignment Register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT	18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_M0PR_SHIFT		0
+#define AT91_MATRIX_M1PR_SHIFT		4
+#define AT91_MATRIX_M2PR_SHIFT		8
+#define AT91_MATRIX_M3PR_SHIFT		12
+#define AT91_MATRIX_M4PR_SHIFT		16
+#define AT91_MATRIX_M5PR_SHIFT		20
+
+#define AT91_MATRIX_RCB0		(1 << 0)
+#define AT91_MATRIX_RCB1		(1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define AT91_MATRIX_DBPUC		(1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+#define AT91_MATRIX_EBI_IOSR_SEL	(1 << 17)
+
+/* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_SLOT_CYCLE		(0xff << 0)
+#define AT91_MATRIX_SLOT_CYCLE_(x)	(x << 0)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9261.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9261.h
new file mode 100644
index 000000000..d5de8d555
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261.h]
+ *
+ * Copyright (C) SAN People
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * Definitions for the SoCs:
+ * AT91SAM9261, AT91SAM9G10
+ *
+ * Note that those SoCs are mostly software and pin compatible,
+ * therefore this file applies to all of them. Differences between
+ * those SoCs are concentrated at the end of this file.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Peripherals */
+#define ATMEL_ID_PIOA	2	/* Parallel IO Controller A */
+#define ATMEL_ID_PIOB	3	/* Parallel IO Controller B */
+#define ATMEL_ID_PIOC	4	/* Parallel IO Controller C */
+/* Reserved:		5 */
+#define ATMEL_ID_USART0	6	/* USART 0 */
+#define ATMEL_ID_USART1	7	/* USART 1 */
+#define ATMEL_ID_USART2	8	/* USART 2 */
+#define ATMEL_ID_MCI	9	/* Multimedia Card Interface */
+#define ATMEL_ID_UDP	10	/* USB Device Port */
+#define ATMEL_ID_TWI0	11	/* Two-Wire Interface 0 */
+#define ATMEL_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define ATMEL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define ATMEL_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define ATMEL_ID_TC0	17	/* Timer Counter 0 */
+#define ATMEL_ID_TC1	18	/* Timer Counter 1 */
+#define ATMEL_ID_TC2	19	/* Timer Counter 2 */
+#define ATMEL_ID_UHP	20	/* USB Host port */
+#define ATMEL_ID_LCDC	21	/* LDC Controller */
+/* Reserved:		22-28 */
+#define ATMEL_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define ATMEL_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define ATMEL_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_TCB0		0xfffa0000
+#define ATMEL_BASE_TC0		0xfffa0000
+#define ATMEL_BASE_TC1		0xfffa0040
+#define ATMEL_BASE_TC2		0xfffa0080
+#define ATMEL_BASE_UDP0		0xfffa4000
+#define ATMEL_BASE_MCI		0xfffa8000
+#define ATMEL_BASE_TWI0		0xfffac000
+#define ATMEL_BASE_USART0	0xfffb0000
+#define ATMEL_BASE_USART1	0xfffb4000
+#define ATMEL_BASE_USART2	0xfffb8000
+#define ATMEL_BASE_SSC0		0xfffbc000
+#define ATMEL_BASE_SSC1		0xfffc0000
+#define ATMEL_BASE_SSC2		0xfffc4000
+#define ATMEL_BASE_SPI0		0xfffc8000
+#define ATMEL_BASE_SPI1		0xfffcc000
+/* Reserved:	0xfffc4000 - 0xffffe9ff */
+
+/*
+ * System Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_SYS		0xffffea00
+#define ATMEL_BASE_SDRAMC	0xffffea00
+#define ATMEL_BASE_SMC		0xffffec00
+#define ATMEL_BASE_MATRIX	0xffffee00
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_DBGU		0xfffff200
+#define ATMEL_BASE_PIOA		0xfffff400
+#define ATMEL_BASE_PIOB		0xfffff600
+#define ATMEL_BASE_PIOC		0xfffff800
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffd00
+#define ATMEL_BASE_SHDWN	0xfffffd10
+#define ATMEL_BASE_RTT		0xfffffd20
+#define ATMEL_BASE_PIT		0xfffffd30
+#define ATMEL_BASE_WDT		0xfffffd40
+#define ATMEL_BASE_GPBR		0xfffffd50
+
+/*
+ * Internal Memory common on all these SoCs
+ */
+#define ATMEL_BASE_SRAM		0x00300000	/* Internal SRAM base address */
+#define ATMEL_SIZE_SRAM		0x00028000	/* Internal SRAM size (160Kb) */
+
+#define ATMEL_BASE_ROM		0x00400000	/* Internal ROM base address */
+#define ATMEL_SIZE_ROM		0x00008000	/* Internal ROM size (32Kb) */
+
+#define ATMEL_BASE_UHP		0x00500000	/* USB Host controller */
+#define ATMEL_BASE_LCDC		0x00600000	/* LDC controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000	/* typically NOR */
+#define ATMEL_BASE_CS1		0x20000000	/* SDRAM */
+#define ATMEL_BASE_CS2		0x30000000
+#define ATMEL_BASE_CS3		0x40000000	/* typically NAND */
+#define ATMEL_BASE_CS4		0x50000000
+#define ATMEL_BASE_CS5		0x60000000
+#define ATMEL_BASE_CS6		0x70000000
+#define ATMEL_BASE_CS7		0x80000000
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfffffd3c
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS		3		/* theese SoCs have 3 PIO */
+#define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
+#define ATMEL_BASE_PIO		ATMEL_BASE_PIOA
+
+/*
+ * SoC specific defines
+ */
+#if defined(CONFIG_AT91SAM9261)
+# define ATMEL_CPU_NAME		"AT91SAM9261"
+#elif defined(CONFIG_AT91SAM9G10)
+# define ATMEL_CPU_NAME		"AT91SAM9G10"
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
new file mode 100644
index 000000000..b856759b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261_matrix.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#ifndef __ASSEMBLY__
+
+struct at91_matrix {
+	u32	mcfg;	/* Master Configuration Registers */
+	u32	scfg[5];	/* Slave Configuration Registers */
+	u32	filler[6];
+	u32	ebicsa;		/* EBI Chip Select Assignment Register */
+};
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_ULBT_INFINITE       (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE         (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR           (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT          (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN        (4 << 0)
+
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE   (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST   (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED  (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN    (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_M0PR_SHIFT          0
+#define AT91_MATRIX_M1PR_SHIFT          4
+#define AT91_MATRIX_M2PR_SHIFT          8
+#define AT91_MATRIX_M3PR_SHIFT          12
+#define AT91_MATRIX_M4PR_SHIFT          16
+#define AT91_MATRIX_M5PR_SHIFT          20
+
+#define AT91_MATRIX_RCB0                (1 << 0)
+#define AT91_MATRIX_RCB1                (1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC         (1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1        (1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2        (1 << 5)
+#define AT91_MATRIX_DBPUC               (1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V      (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V      (1 << 16)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9263.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9263.h
new file mode 100644
index 000000000..c9fff934d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263.h]
+ *
+ * (C) 2007 Atmel Corporation.
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * Definitions for the SoC:
+ * AT91SAM9263
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Peripherals */
+#define ATMEL_ID_PIOA	2	/* Parallel IO Controller A */
+#define ATMEL_ID_PIOB	3	/* Parallel IO Controller B */
+#define ATMEL_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+/* Reserved:		5 */
+/* Reserved:		6 */
+#define ATMEL_ID_USART0	7	/* USART 0 */
+#define ATMEL_ID_USART1	8	/* USART 1 */
+#define ATMEL_ID_USART2	9	/* USART 2 */
+#define ATMEL_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define ATMEL_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define ATMEL_ID_CAN	12	/* CAN */
+#define ATMEL_ID_TWI	13	/* Two-Wire Interface */
+#define ATMEL_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define ATMEL_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define ATMEL_ID_AC97C	18	/* AC97 Controller */
+#define ATMEL_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define ATMEL_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_EMAC	21	/* Ethernet */
+/* Reserved:		22 */
+#define ATMEL_ID_2DGE	23	/* 2D Graphic Engine */
+#define ATMEL_ID_UDP	24	/* USB Device Port */
+#define ATMEL_ID_ISI	25	/* Image Sensor Interface */
+#define ATMEL_ID_LCDC	26	/* LCD Controller */
+#define ATMEL_ID_DMA	27	/* DMA Controller */
+/* Reserved:		28 */
+#define ATMEL_ID_UHP	29	/* USB Host port */
+#define ATMEL_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define ATMEL_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_UDP		0xfff78000
+#define ATMEL_BASE_TCB0		0xfff7c000
+#define ATMEL_BASE_TC0		0xfff7c000
+#define ATMEL_BASE_TC1		0xfff7c040
+#define ATMEL_BASE_TC2		0xfff7c080
+#define ATMEL_BASE_MCI0		0xfff80000
+#define ATMEL_BASE_MCI1		0xfff84000
+#define ATMEL_BASE_TWI		0xfff88000
+#define ATMEL_BASE_USART0	0xfff8c000
+#define ATMEL_BASE_USART1	0xfff90000
+#define ATMEL_BASE_USART2	0xfff94000
+#define ATMEL_BASE_SSC0		0xfff98000
+#define ATMEL_BASE_SSC1		0xfff9c000
+#define ATMEL_BASE_AC97C	0xfffa0000
+#define ATMEL_BASE_SPI0		0xfffa4000
+#define ATMEL_BASE_SPI1		0xfffa8000
+#define ATMEL_BASE_CAN		0xfffac000
+#define ATMEL_BASE_PWMC		0xfffb8000
+#define ATMEL_BASE_EMAC		0xfffbc000
+#define ATMEL_BASE_ISI		0xfffc4000
+#define ATMEL_BASE_2DGE		0xfffc8000
+
+/*
+ * System Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_ECC0		0xffffe000
+#define ATMEL_BASE_SDRAMC0	0xffffe200
+#define ATMEL_BASE_SMC0		0xffffe400
+#define ATMEL_BASE_ECC1		0xffffe600
+#define ATMEL_BASE_SDRAMC1	0xffffe800
+#define ATMEL_BASE_SMC1		0xffffea00
+#define ATMEL_BASE_MATRIX	0xffffec00
+#define ATMEL_BASE_CCFG		0xffffed10
+#define ATMEL_BASE_DBGU		0xffffee00
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_PIOA		0xfffff200
+#define ATMEL_BASE_PIOB		0xfffff400
+#define ATMEL_BASE_PIOC		0xfffff600
+#define ATMEL_BASE_PIOD		0xfffff800
+#define ATMEL_BASE_PIOE		0xfffffa00
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffd00
+#define ATMEL_BASE_SHDWC	0xfffffd10
+#define ATMEL_BASE_RTT0		0xfffffd20
+#define ATMEL_BASE_PIT		0xfffffd30
+#define ATMEL_BASE_WDT		0xfffffd40
+#define ATMEL_BASE_RTT1		0xfffffd50
+#define ATMEL_BASE_GPBR		0xfffffd60
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_SRAM0	0x00300000	/* Internal SRAM 0 */
+
+#define ATMEL_BASE_ROM		0x00400000	/* Internal ROM */
+
+#define ATMEL_BASE_SRAM1	0x00500000	/* Internal SRAM 1 */
+
+#define ATMEL_BASE_LCDC		0x00700000	/* LCD Controller */
+#define ATMEL_BASE_DMAC		0x00800000	/* DMA Controller */
+#define ATMEL_BASE_UHP		0x00a00000	/* USB Host controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000	/* typically NOR */
+#define ATMEL_BASE_CS1		0x20000000	/* SDRAM */
+#define ATMEL_BASE_CS2		0x30000000
+#define ATMEL_BASE_CS3		0x40000000	/* typically NAND */
+#define ATMEL_BASE_CS4		0x50000000
+#define ATMEL_BASE_CS5		0x60000000
+#define ATMEL_BASE_CS6		0x70000000
+#define ATMEL_BASE_CS7		0x80000000
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfffffd3c
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS		5		/* this SoCs has 5 PIO */
+#define ATMEL_BASE_PIO		ATMEL_BASE_PIOA
+#define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
+
+/*
+ * Cpu Name
+ */
+#define ATMEL_CPU_NAME		"AT91SAM9263"
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
new file mode 100644
index 000000000..f08d2eb1f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263_matrix.h]
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines access to the matrix' maximum of
+ * 16 masters and 16 slaves.
+ * Note: not all masters/slaves are available
+ */
+struct at91_matrix {
+	u32	mcfg[16];	/* Master Configuration Registers */
+	u32	scfg[16];	/* Slave Configuration Registers */
+	u32	pras[16][2];	/* Priority Assignment Slave Registers */
+	u32	mrcr;		/* Master Remap Control Register */
+	u32	filler[0x06];
+	u32	ebicsa;		/* EBI Chip Select Assignment Register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT	18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_M0PR_SHIFT		0
+#define AT91_MATRIX_M1PR_SHIFT		4
+#define AT91_MATRIX_M2PR_SHIFT		8
+#define AT91_MATRIX_M3PR_SHIFT		12
+#define AT91_MATRIX_M4PR_SHIFT		16
+#define AT91_MATRIX_M5PR_SHIFT		20
+
+#define AT91_MATRIX_RCB0		(1 << 0)
+#define AT91_MATRIX_RCB1		(1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define AT91_MATRIX_DBPUC		(1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_matrix.h
new file mode 100644
index 000000000..558abbe26
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_matrix.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jrosoft.com>
+ */
+
+#ifndef __ASM_ARCH_AT91SAM9_MATRIX_H
+#define __ASM_ARCH_AT91SAM9_MATRIX_H
+
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
+#include <asm/arch/at91sam9260_matrix.h>
+#elif defined(CONFIG_AT91SAM9261)
+#include <asm/arch/at91sam9261_matrix.h>
+#elif defined(CONFIG_AT91SAM9263)
+#include <asm/arch/at91sam9263_matrix.h>
+#elif defined(CONFIG_AT91SAM9RL)
+#include <asm/arch/at91sam9rl_matrix.h>
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#include <asm/arch/at91sam9g45_matrix.h>
+#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
+#include <asm/arch/at91sam9x5_matrix.h>
+#else
+#error "Unsupported AT91SAM9/CAP9 processor"
+#endif
+
+#endif /* __ASM_ARCH_AT91SAM9_MATRIX_H */
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
new file mode 100644
index 000000000..64abf70c5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel arch/arm/mach-at91/include/mach/at91_wdt.h]
+ *
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ */
+
+#ifndef AT91SAM9_SDRAMC_H
+#define AT91SAM9_SDRAMC_H
+
+#ifdef __ASSEMBLY__
+
+#ifndef ATMEL_BASE_SDRAMC
+#define ATMEL_BASE_SDRAMC	ATMEL_BASE_SDRAMC0
+#endif
+
+#define AT91_ASM_SDRAMC_MR	ATMEL_BASE_SDRAMC
+#define AT91_ASM_SDRAMC_TR	(ATMEL_BASE_SDRAMC + 0x04)
+#define AT91_ASM_SDRAMC_CR	(ATMEL_BASE_SDRAMC + 0x08)
+#define AT91_ASM_SDRAMC_MDR	(ATMEL_BASE_SDRAMC + 0x24)
+
+#else
+struct sdramc_reg {
+	u32	mr;
+	u32	tr;
+	u32	cr;
+	u32	lpr;
+	u32	ier;
+	u32	idr;
+	u32	imr;
+	u32	isr;
+	u32	mdr;
+};
+
+int sdramc_initialize(unsigned int sdram_address,
+		      const struct sdramc_reg *p);
+#endif
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR		(ATMEL_BASE_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		0
+#define			AT91_SDRAMC_MODE_NOP		1
+#define			AT91_SDRAMC_MODE_PRECHARGE	2
+#define			AT91_SDRAMC_MODE_LMR		3
+#define			AT91_SDRAMC_MODE_REFRESH	4
+#define			AT91_SDRAMC_MODE_EXT_LMR	5
+#define			AT91_SDRAMC_MODE_DEEP		6
+
+#define AT91_SDRAMC_TR		(ATMEL_BASE_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR		(ATMEL_BASE_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_1	(1 << 5)
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define			AT91_SDRAMC_CAS_3	(3 << 5)
+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 7)
+#define			AT91_SDRAMC_DBW_16	(1 << 7)
+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TWR_VAL(x)	(x << 8)
+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
+#define			AT91_SDRAMC_TRC_VAL(x)	(x << 12)
+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRP_VAL(x)	(x << 16)
+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
+#define			AT91_SDRAMC_TRCD_VAL(x)	(x << 20)
+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TRAS_VAL(x)	(x << 24)
+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
+#define		AT91_SDRAMC_TXSR_VAL(x)	(x << 28)
+
+#define AT91_SDRAMC_LPR		(ATMEL_BASE_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_SDRAMC_LPCB_DISABLE		0
+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strength */
+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_SDRAMC_IER		(ATMEL_BASE_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(ATMEL_BASE_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(ATMEL_BASE_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(ATMEL_BASE_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR		(ATMEL_BASE_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_SDRAMC_MD_SDRAM		0
+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_smc.h
new file mode 100644
index 000000000..404ffaad4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9_smc.h]
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ */
+
+#ifndef AT91SAM9_SMC_H
+#define AT91SAM9_SMC_H
+
+#ifdef __ASSEMBLY__
+
+#ifndef ATMEL_BASE_SMC
+#define ATMEL_BASE_SMC	ATMEL_BASE_SMC0
+#endif
+
+#define AT91_ASM_SMC_SETUP0	ATMEL_BASE_SMC
+#define AT91_ASM_SMC_PULSE0	(ATMEL_BASE_SMC + 0x04)
+#define AT91_ASM_SMC_CYCLE0	(ATMEL_BASE_SMC + 0x08)
+#define AT91_ASM_SMC_MODE0	(ATMEL_BASE_SMC + 0x0C)
+
+#else
+
+typedef struct	at91_cs {
+	u32	setup;		/* 0x00 SMC Setup Register */
+	u32	pulse;		/* 0x04 SMC Pulse Register */
+	u32	cycle;		/* 0x08 SMC Cycle Register */
+	u32	mode;		/* 0x0C SMC Mode Register */
+} at91_cs_t;
+
+typedef struct	at91_smc {
+	at91_cs_t	cs[8];
+} at91_smc_t;
+
+#endif /*  __ASSEMBLY__ */
+
+#define AT91_SMC_SETUP_NWE(x)		(x & 0x3f)
+#define AT91_SMC_SETUP_NCS_WR(x)	((x & 0x3f) << 8)
+#define AT91_SMC_SETUP_NRD(x)		((x & 0x3f) << 16)
+#define AT91_SMC_SETUP_NCS_RD(x)	((x & 0x3f) << 24)
+
+#define AT91_SMC_PULSE_NWE(x)		(x & 0x7f)
+#define AT91_SMC_PULSE_NCS_WR(x)	((x & 0x7f) << 8)
+#define AT91_SMC_PULSE_NRD(x)		((x & 0x7f) << 16)
+#define AT91_SMC_PULSE_NCS_RD(x)	((x & 0x7f) << 24)
+
+#define AT91_SMC_CYCLE_NWE(x)		(x & 0x1ff)
+#define AT91_SMC_CYCLE_NRD(x)		((x & 0x1ff) << 16)
+
+#define AT91_SMC_MODE_RM_NCS		0x00000000
+#define AT91_SMC_MODE_RM_NRD		0x00000001
+#define AT91_SMC_MODE_WM_NCS		0x00000000
+#define AT91_SMC_MODE_WM_NWE		0x00000002
+
+#define AT91_SMC_MODE_EXNW_DISABLE	0x00000000
+#define AT91_SMC_MODE_EXNW_FROZEN	0x00000020
+#define AT91_SMC_MODE_EXNW_READY	0x00000030
+
+#define AT91_SMC_MODE_BAT		0x00000100
+#define AT91_SMC_MODE_DBW_8		0x00000000
+#define AT91_SMC_MODE_DBW_16		0x00001000
+#define AT91_SMC_MODE_DBW_32		0x00002000
+#define AT91_SMC_MODE_TDF_CYCLE(x)	((x & 0xf) << 16)
+#define AT91_SMC_MODE_TDF		0x00100000
+#define AT91_SMC_MODE_PMEN		0x01000000
+#define AT91_SMC_MODE_PS_4		0x00000000
+#define AT91_SMC_MODE_PS_8		0x10000000
+#define AT91_SMC_MODE_PS_16		0x20000000
+#define AT91_SMC_MODE_PS_32		0x30000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9g45.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9g45.h
new file mode 100644
index 000000000..588032582
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Chip-specific header file for the AT91SAM9M1x family
+ *
+ * (C) 2008 Atmel Corporation.
+ *
+ * Definitions for the SoC:
+ * AT91SAM9G45
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Controller Interrupt */
+#define ATMEL_ID_PIOA	2	/* Parallel I/O Controller A */
+#define ATMEL_ID_PIOB	3	/* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC	4	/* Parallel I/O Controller C */
+#define ATMEL_ID_PIODE	5	/* Parallel I/O Controller D and E */
+#define ATMEL_ID_TRNG	6	/* True Random Number Generator */
+#define ATMEL_ID_USART0	7	/* USART 0 */
+#define ATMEL_ID_USART1	8	/* USART 1 */
+#define ATMEL_ID_USART2	9	/* USART 2 */
+#define ATMEL_ID_USART3	10	/* USART 3 */
+#define ATMEL_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_TWI0	12	/* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1	13	/* Two-Wire Interface 1 */
+#define ATMEL_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_SSC0	16	/* Synchronous Serial Controller 0 */
+#define ATMEL_ID_SSC1	17	/* Synchronous Serial Controller 1 */
+#define ATMEL_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define ATMEL_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC	20	/* Touch Screen ADC Controller */
+#define ATMEL_ID_DMA	21	/* DMA Controller */
+#define ATMEL_ID_UHPHS	22	/* USB Host High Speed */
+#define ATMEL_ID_LCDC	23	/* LCD Controller */
+#define ATMEL_ID_AC97C	24	/* AC97 Controller */
+#define ATMEL_ID_EMAC	25	/* Ethernet MAC */
+#define ATMEL_ID_ISI	26	/* Image Sensor Interface */
+#define ATMEL_ID_UDPHS	27	/* USB Device High Speed */
+#define ATMEL_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
+#define ATMEL_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
+#define ATMEL_ID_VDEC	30	/* Video Decoder */
+#define ATMEL_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_UDPHS	0xfff78000
+#define ATMEL_BASE_TC0		0xfff7c000
+#define ATMEL_BASE_TC1		0xfff7c040
+#define ATMEL_BASE_TC2		0xfff7c080
+#define ATMEL_BASE_MCI0		0xfff80000
+#define ATMEL_BASE_TWI0		0xfff84000
+#define ATMEL_BASE_TWI1		0xfff88000
+#define ATMEL_BASE_USART0	0xfff8c000
+#define ATMEL_BASE_USART1	0xfff90000
+#define ATMEL_BASE_USART2	0xfff94000
+#define ATMEL_BASE_USART3	0xfff98000
+#define ATMEL_BASE_SSC0		0xfff9c000
+#define ATMEL_BASE_SSC1		0xfffa0000
+#define ATMEL_BASE_SPI0		0xfffa4000
+#define ATMEL_BASE_SPI1		0xfffa8000
+#define ATMEL_BASE_AC97C	0xfffac000
+#define ATMEL_BASE_TSC		0xfffb0000
+#define ATMEL_BASE_ISI		0xfffb4000
+#define ATMEL_BASE_PWMC		0xfffb8000
+#define ATMEL_BASE_EMAC		0xfffbc000
+#define ATMEL_BASE_AES		0xfffc0000
+#define ATMEL_BASE_TDES		0xfffc4000
+#define ATMEL_BASE_SHA		0xfffc8000
+#define ATMEL_BASE_TRNG		0xfffcc000
+#define ATMEL_BASE_MCI1		0xfffd0000
+#define ATMEL_BASE_TC3		0xfffd4000
+#define ATMEL_BASE_TC4		0xfffd4040
+#define ATMEL_BASE_TC5		0xfffd4080
+/* Reserved:	0xfffd8000 - 0xffffe1ff */
+
+/*
+ * System Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_SYS		0xffffe200
+#define ATMEL_BASE_ECC		0xffffe200
+#define ATMEL_BASE_DDRSDRC1	0xffffe400
+#define ATMEL_BASE_DDRSDRC0	0xffffe600
+#define ATMEL_BASE_SMC		0xffffe800
+#define ATMEL_BASE_MATRIX	0xffffea00
+#define ATMEL_BASE_DMA		0xffffec00
+#define ATMEL_BASE_DBGU		0xffffee00
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_PIOA		0xfffff200
+#define ATMEL_BASE_PIOB		0xfffff400
+#define ATMEL_BASE_PIOC		0xfffff600
+#define ATMEL_BASE_PIOD		0xfffff800
+#define ATMEL_BASE_PIOE		0xfffffa00
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffd00
+#define ATMEL_BASE_SHDWN	0xfffffd10
+#define ATMEL_BASE_RTT		0xfffffd20
+#define ATMEL_BASE_PIT		0xfffffd30
+#define ATMEL_BASE_WDT		0xfffffd40
+#define ATMEL_BASE_SCKCR	0xfffffd50
+#define ATMEL_BASE_GPBR		0xfffffd60
+#define ATMEL_BASE_RTC		0xfffffdb0
+/* Reserved:	0xfffffdc0 - 0xffffffff */
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_SRAM		0x00300000	/* Internal SRAM base address */
+#define ATMEL_BASE_ROM		0x00400000	/* Internal ROM base address */
+#define ATMEL_BASE_LCDC		0x00500000	/* LCD Controller */
+#define ATMEL_BASE_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+#define ATMEL_BASE_HCI		0x00700000	/* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00800000	/* USB Host controller (EHCI) */
+#define ATMEL_BASE_VDEC		0x00900000	/* Video Decoder Controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000
+#define ATMEL_BASE_CS1		0x20000000
+#define ATMEL_BASE_CS2		0x30000000
+#define ATMEL_BASE_CS3		0x40000000
+#define ATMEL_BASE_CS4		0x50000000
+#define ATMEL_BASE_CS5		0x60000000
+#define ATMEL_BASE_CS6		0x70000000
+#define ATMEL_BASE_CS7		0x80000000
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfffffd3c
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS		5		/* this SoCs has 5 PIO */
+#define ATMEL_BASE_PIO		ATMEL_BASE_PIOA
+#define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
+#define ATMEL_ID_UHP		ATMEL_ID_UHPHS
+/*
+ * Cpu Name
+ */
+#define ATMEL_CPU_NAME		"AT91SAM9G45"
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
new file mode 100644
index 000000000..62d4901bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Matrix-centric header file for the AT91SAM9M1x family
+ *
+ *  Copyright (C) 2008 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#ifndef __ASSEMBLY__
+
+struct at91_matrix {
+	u32	mcfg[16];
+	u32	scfg[16];
+	u32	pras[16][2];
+	u32	mrcr;           /* 0x100 Master Remap Control */
+	u32	filler[3];
+	u32	tcmr;
+	u32	filler2;
+	u32	ddrmpr;
+	u32	filler3[3];
+	u32	ebicsa;
+	u32	filler4[47];
+	u32	wpmr;
+	u32	wpsr;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define	AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define	AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define	AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define	AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define	AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define	AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define	AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define	AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define	AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define	AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define	AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+
+#define AT91_MATRIX_M0PR_SHIFT          0
+#define AT91_MATRIX_M1PR_SHIFT          4
+#define AT91_MATRIX_M2PR_SHIFT          8
+#define AT91_MATRIX_M3PR_SHIFT          12
+#define AT91_MATRIX_M4PR_SHIFT          16
+#define AT91_MATRIX_M5PR_SHIFT          20
+#define AT91_MATRIX_M6PR_SHIFT          24
+#define AT91_MATRIX_M7PR_SHIFT          28
+
+#define AT91_MATRIX_M8PR_SHIFT          0  /* register B */
+#define AT91_MATRIX_M9PR_SHIFT          4  /* register B */
+#define AT91_MATRIX_M10PR_SHIFT         8  /* register B */
+#define AT91_MATRIX_M11PR_SHIFT         12 /* register B */
+
+#define AT91_MATRIX_RCB0                (1 << 0)
+#define AT91_MATRIX_RCB1                (1 << 1)
+#define AT91_MATRIX_RCB2                (1 << 2)
+#define AT91_MATRIX_RCB3                (1 << 3)
+#define AT91_MATRIX_RCB4                (1 << 4)
+#define AT91_MATRIX_RCB5                (1 << 5)
+#define AT91_MATRIX_RCB6                (1 << 6)
+#define AT91_MATRIX_RCB7                (1 << 7)
+#define AT91_MATRIX_RCB8                (1 << 8)
+#define AT91_MATRIX_RCB9                (1 << 9)
+#define AT91_MATRIX_RCB10               (1 << 10)
+
+#define AT91_MATRIX_EBI_CS1A_SMC                (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC             (1 << 1)
+#define AT91_MATRIX_EBI_CS3A_SMC                (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA     (1 << 3)
+#define AT91_MATRIX_EBI_CS4A_SMC                (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF0            (1 << 4)
+#define AT91_MATRIX_EBI_CS5A_SMC                (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF1            (1 << 5)
+#define AT91_MATRIX_EBI_DBPU_ON                 (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF                (1 << 8)
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V          (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V          (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED        (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL         (1 << 17)
+#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED        (0 << 18)
+#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL         (1 << 18)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9rl.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9rl.h
new file mode 100644
index 000000000..8f9155c9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -0,0 +1,128 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl.h]
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Peripherals */
+#define ATMEL_ID_PIOA	2	/* Parallel IO Controller A */
+#define ATMEL_ID_PIOB	3	/* Parallel IO Controller B */
+#define ATMEL_ID_PIOC	4	/* Parallel IO Controller C */
+#define ATMEL_ID_PIOD	5	/* Parallel IO Controller D */
+#define ATMEL_ID_USART0	6	/* USART 0 */
+#define ATMEL_ID_USART1	7	/* USART 1 */
+#define ATMEL_ID_USART2	8	/* USART 2 */
+#define ATMEL_ID_USART3	9	/* USART 3 */
+#define ATMEL_ID_MCI	10	/* Multimedia Card Interface */
+#define ATMEL_ID_TWI0	11	/* TWI 0 */
+#define ATMEL_ID_TWI1	12	/* TWI 1 */
+#define ATMEL_ID_SPI	13	/* Serial Peripheral Interface */
+#define ATMEL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define ATMEL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define ATMEL_ID_TC0	16	/* Timer Counter 0 */
+#define ATMEL_ID_TC1	17	/* Timer Counter 1 */
+#define ATMEL_ID_TC2	18	/* Timer Counter 2 */
+#define ATMEL_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC	20	/* Touch Screen Controller */
+#define ATMEL_ID_DMA	21	/* DMA Controller */
+#define ATMEL_ID_UDPHS	22	/* USB Device HS */
+#define ATMEL_ID_LCDC	23	/* LCD Controller */
+#define ATMEL_ID_AC97C	24	/* AC97 Controller */
+#define ATMEL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define ATMEL_BASE_TCB0		0xfffa0000
+#define ATMEL_BASE_TC0		0xfffa0000
+#define ATMEL_BASE_TC1		0xfffa0040
+#define ATMEL_BASE_TC2		0xfffa0080
+#define ATMEL_BASE_MCI		0xfffa4000
+#define ATMEL_BASE_TWI0		0xfffa8000
+#define ATMEL_BASE_TWI1		0xfffac000
+#define ATMEL_BASE_USART0	0xfffb0000
+#define ATMEL_BASE_USART1	0xfffb4000
+#define ATMEL_BASE_USART2	0xfffb8000
+#define ATMEL_BASE_USART3	0xfffbc000
+#define ATMEL_BASE_SSC0		0xfffc0000
+#define ATMEL_BASE_SSC1		0xfffc4000
+#define ATMEL_BASE_PWMC		0xfffc8000
+#define ATMEL_BASE_SPI0		0xfffcc000
+#define ATMEL_BASE_TSC		0xfffd0000
+#define ATMEL_BASE_UDPHS	0xfffd4000
+#define ATMEL_BASE_AC97C	0xfffd8000
+#define ATMEL_BASE_SYS		0xffffc000
+
+/*
+ * System Peripherals
+ */
+#define ATMEL_BASE_DMA		0xffffe600
+#define ATMEL_BASE_ECC		0xffffe800
+#define ATMEL_BASE_SDRAMC	0xffffea00
+#define ATMEL_BASE_SMC		0xffffec00
+#define ATMEL_BASE_MATRIX	0xffffee00
+#define ATMEL_BASE_CCFG		0xffffef10
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_DBGU		0xfffff200
+#define ATMEL_BASE_PIOA		0xfffff400
+#define ATMEL_BASE_PIOB		0xfffff600
+#define ATMEL_BASE_PIOC		0xfffff800
+#define ATMEL_BASE_PIOD		0xfffffa00
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffd00
+#define ATMEL_BASE_SHDWC	0xfffffd10
+#define ATMEL_BASE_RTT		0xfffffd20
+#define ATMEL_BASE_PIT		0xfffffd30
+#define ATMEL_BASE_WDT		0xfffffd40
+#define ATMEL_BASE_SCKCR	0xfffffd50
+#define ATMEL_BASE_GPBR		0xfffffd60
+#define ATMEL_BASE_RTC		0xfffffe00
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_SRAM		0x00300000	/* Internal SRAM base address */
+#define ATMEL_BASE_ROM		0x00400000	/* Internal ROM base address */
+
+#define ATMEL_BASE_LCDC		0x00500000	/* LCD Controller */
+#define ATMEL_UHP_BASE		0x00600000	/* USB Device HS controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000
+#define ATMEL_BASE_CS1		0x20000000	/* SDRAM */
+#define ATMEL_BASE_CS2		0x30000000
+#define ATMEL_BASE_CS3		0x40000000	/* NAND */
+#define ATMEL_BASE_CS4		0x50000000	/* Compact Flash Slot 0 */
+#define ATMEL_BASE_CS5		0x60000000	/* Compact Flash Slot 1 */
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfffffd3c
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS		4		/* this SoC has 4 PIO */
+#define ATMEL_BASE_PIO		ATMEL_BASE_PIOA
+
+/*
+ * Cpu Name
+ */
+#define ATMEL_CPU_NAME		"AT91SAM9RL"
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
new file mode 100644
index 000000000..295f768b5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -0,0 +1,61 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl_matrix.h]
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#ifndef __ASSEMBLY__
+
+struct at91_matrix {
+	u32	mcfg[16];	/* Master Configuration Registers */
+	u32	scfg[16];	/* Slave Configuration Registers */
+	u32	pras[16][2];	/* Priority Assignment Slave Registers */
+	u32	mrcr;		/* Master Remap Control Register */
+	u32	filler[7];
+	u32	ebicsa;		/* EBI Chip Select Assignment Register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT	18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_M0PR_SHIFT		0
+#define AT91_MATRIX_M1PR_SHIFT		4
+#define AT91_MATRIX_M2PR_SHIFT		8
+#define AT91_MATRIX_M3PR_SHIFT		12
+#define AT91_MATRIX_M4PR_SHIFT		16
+#define AT91_MATRIX_M5PR_SHIFT		20
+
+#define AT91_MATRIX_RCB0		(1 << 0)
+#define AT91_MATRIX_RCB1		(1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define AT91_MATRIX_DBPUC		(1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9x5.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9x5.h
new file mode 100644
index 000000000..e3c494c5d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Chip-specific header file for the AT91SAM9x5 family
+ *
+ *  Copyright (C) 2012-2013 Atmel Corporation.
+ *
+ * Definitions for the SoC:
+ * AT91SAM9x5 & AT91SAM9N12
+ */
+
+#ifndef __AT91SAM9X5_H__
+#define __AT91SAM9X5_H__
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Controller Interrupt */
+#define ATMEL_ID_PIOAB	2	/* Parallel I/O Controller A and B */
+#define ATMEL_ID_PIOCD	3	/* Parallel I/O Controller C and D */
+#define ATMEL_ID_SMD	4	/* SMD Soft Modem (SMD), only for AT91SAM9X5 */
+#define ATMEL_ID_FUSE	4	/* FUSE Controller, only for AT91SAM9N12 */
+#define ATMEL_ID_USART0	5	/* USART 0 */
+#define ATMEL_ID_USART1	6	/* USART 1 */
+#define ATMEL_ID_USART2	7	/* USART 2 */
+#define ATMEL_ID_USART3	8	/* USART 3 */
+#define ATMEL_ID_TWI0	9	/* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1	10	/* Two-Wire Interface 1 */
+#define ATMEL_ID_TWI2	11	/* Two-Wire Interface 2 */
+#define ATMEL_ID_HSMCI0	12	/* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_SPI0	13	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	14	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_UART0	15	/* UART 0 */
+#define ATMEL_ID_UART1	16	/* UART 1 */
+#define ATMEL_ID_TC01	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define ATMEL_ID_PWM	18	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_ADC	19	/* ADC Controller */
+#define ATMEL_ID_DMAC0	20	/* DMA Controller 0 */
+#define ATMEL_ID_DMAC1	21	/* DMA Controller 1 */
+#define ATMEL_ID_UHPHS	22	/* USB Host High Speed */
+#define ATMEL_ID_UDPHS	23	/* USB Device High Speed */
+#define ATMEL_ID_EMAC0	24	/* Ethernet MAC0 */
+#define ATMEL_ID_LCDC	25	/* LCD Controller */
+#define ATMEL_ID_HSMCI1	26	/* High Speed Multimedia Card Interface 1 */
+#define ATMEL_ID_EMAC1	27	/* Ethernet MAC1 */
+#define ATMEL_ID_SSC	28	/* Synchronous Serial Controller */
+#define ATMEL_ID_TRNG	30	/* True Random Number Generator */
+#define ATMEL_ID_IRQ	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define ATMEL_BASE_SPI0		0xf0000000
+#define ATMEL_BASE_SPI1		0xf0004000
+#define ATMEL_BASE_HSMCI0	0xf0008000
+#define ATMEL_BASE_HSMCI1	0xf000c000
+#define ATMEL_BASE_SSC		0xf0010000
+#define ATMEL_BASE_CAN0		0xf8000000
+#define ATMEL_BASE_CAN1		0xf8004000
+#define ATMEL_BASE_TC0		0xf8008000
+#define ATMEL_BASE_TC1		0xf8008040
+#define ATMEL_BASE_TC2		0xf8008080
+#define ATMEL_BASE_TC3		0xf800c000
+#define ATMEL_BASE_TC4		0xf800c040
+#define ATMEL_BASE_TC5		0xf800c080
+#define ATMEL_BASE_TWI0		0xf8010000
+#define ATMEL_BASE_TWI1		0xf8014000
+#define ATMEL_BASE_TWI2		0xf8018000
+#define ATMEL_BASE_USART0	0xf801c000
+#define ATMEL_BASE_USART1	0xf8020000
+#define ATMEL_BASE_USART2	0xf8024000
+#define ATMEL_BASE_USART3	0xf8028000
+#define ATMEL_BASE_EMAC0	0xf802c000
+#define ATMEL_BASE_EMAC1	0xf8030000
+#define ATMEL_BASE_PWM		0xf8034000
+#define ATMEL_BASE_LCDC		0xf8038000
+#define ATMEL_BASE_UDPHS	0xf803c000
+#define ATMEL_BASE_UART0	0xf8040000
+#define ATMEL_BASE_UART1	0xf8044000
+#define ATMEL_BASE_ISI		0xf8048000
+#define ATMEL_BASE_ADC		0xf804c000
+#define ATMEL_BASE_SYS		0xffffc000
+
+/*
+ * System Peripherals
+ */
+#define ATMEL_BASE_FUSE		0xffffdc00
+#define ATMEL_BASE_MATRIX	0xffffde00
+#define ATMEL_BASE_PMECC	0xffffe000
+#define ATMEL_BASE_PMERRLOC	0xffffe600
+#define ATMEL_BASE_DDRSDRC	0xffffe800
+#define ATMEL_BASE_SMC		0xffffea00
+#define ATMEL_BASE_DMAC0	0xffffec00
+#define ATMEL_BASE_DMAC1	0xffffee00
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_DBGU		0xfffff200
+#define ATMEL_BASE_PIOA		0xfffff400
+#define ATMEL_BASE_PIOB		0xfffff600
+#define ATMEL_BASE_PIOC		0xfffff800
+#define ATMEL_BASE_PIOD		0xfffffa00
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffe00
+#define ATMEL_BASE_SHDWC	0xfffffe10
+#define ATMEL_BASE_PIT		0xfffffe30
+#define ATMEL_BASE_WDT		0xfffffe40
+#define ATMEL_BASE_GPBR		0xfffffe60
+#define ATMEL_BASE_RTC		0xfffffeb0
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM		0x00100000 /* Internal ROM base address */
+#define ATMEL_BASE_SRAM		0x00300000 /* Internal SRAM base address */
+
+#ifdef CONFIG_AT91SAM9N12
+#define ATMEL_BASE_OHCI		0x00500000 /* USB Host controller */
+#else	/* AT91SAM9X5 */
+#define ATMEL_BASE_SMD		0x00400000 /* SMD Controller */
+#define ATMEL_BASE_UDPHS_FIFO	0x00500000 /* USB Device HS controller */
+#define ATMEL_BASE_OHCI		0x00600000 /* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00700000 /* USB Host controller (EHCI) */
+#endif
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000
+#define ATMEL_BASE_CS1		0x20000000
+#define ATMEL_BASE_CS2		0x30000000
+#define ATMEL_BASE_CS3		0x40000000
+#define ATMEL_BASE_CS4		0x50000000
+#define ATMEL_BASE_CS5		0x60000000
+
+/* 9x5 series chip id definitions */
+#define ARCH_ID_AT91SAM9X5	0x819a05a0
+#define ARCH_ID_VERSION_MASK	0x1f
+#define ARCH_EXID_AT91SAM9G15	0x00000000
+#define ARCH_EXID_AT91SAM9G35	0x00000001
+#define ARCH_EXID_AT91SAM9X35	0x00000002
+#define ARCH_EXID_AT91SAM9G25	0x00000003
+#define ARCH_EXID_AT91SAM9X25	0x00000004
+
+#define cpu_is_at91sam9x5()	(get_chip_id() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g25()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9g35()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x25()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9X25))
+#define cpu_is_at91sam9x35()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9X35))
+
+/*
+ * Cpu Name
+ */
+#ifdef CONFIG_AT91SAM9N12
+#define ATMEL_CPU_NAME	"AT91SAM9N12"
+#else	/* AT91SAM9X5 */
+#define ATMEL_CPU_NAME	get_cpu_name()
+#endif
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfffffe3c
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS         4
+#define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
+#define ATMEL_ID_UHP		ATMEL_ID_UHPHS
+
+/*
+ * PMECC table in ROM
+ */
+#define ATMEL_PMECC_INDEX_OFFSET_512	0x8000
+#define ATMEL_PMECC_INDEX_OFFSET_1024	0x10000
+
+/*
+ * at91sam9x5 specific prototypes
+ */
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_emac1(void);
+unsigned int has_emac0(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
new file mode 100644
index 000000000..8288090d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Matrix-centric header file for the AT91SAM9X5 family
+ *
+ *  Copyright (C) 2012-2013 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9X5 & AT91SAM9N12 preliminary datasheet.
+ */
+
+#ifndef __AT91SAM9X5_MATRIX_H__
+#define __AT91SAM9X5_MATRIX_H__
+
+#ifndef __ASSEMBLY__
+
+/* AT91SAM9N12 Matrix definition is a subset of AT91SAM9X5. */
+struct at91_matrix {
+	u32	mcfg[16];
+	u32	scfg[16];
+	u32	pras[16][2];
+	u32	mrcr;           /* 0x100 Master Remap Control */
+	u32	filler[5];
+#ifdef CONFIG_AT91SAM9X5
+	u32	filler1[2];
+#endif
+	/* EBI Chip Select Assignment Register
+	 * 0x118: AT91SAM9N12
+	 * 0x120: AT91SAM9X5
+	 */
+	u32	ebicsa;
+	u32	filler4[47];
+#ifdef CONFIG_AT91SAM9N12
+	u32	filler5[2];
+#endif
+	u32	wpmr;
+	u32	wpsr;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+
+#define AT91_MATRIX_M0PR_SHIFT          0
+#define AT91_MATRIX_M1PR_SHIFT          4
+#define AT91_MATRIX_M2PR_SHIFT          8
+#define AT91_MATRIX_M3PR_SHIFT          12
+#define AT91_MATRIX_M4PR_SHIFT          16
+#define AT91_MATRIX_M5PR_SHIFT          20
+#define AT91_MATRIX_M6PR_SHIFT          24
+#define AT91_MATRIX_M7PR_SHIFT          28
+
+#define AT91_MATRIX_M8PR_SHIFT          0  /* register B */
+#define AT91_MATRIX_M9PR_SHIFT          4  /* register B */
+#define AT91_MATRIX_M10PR_SHIFT         8  /* register B */
+#define AT91_MATRIX_M11PR_SHIFT         12 /* register B */
+
+#define AT91_MATRIX_RCB0                (1 << 0)
+#define AT91_MATRIX_RCB1                (1 << 1)
+#define AT91_MATRIX_RCB2                (1 << 2)
+#define AT91_MATRIX_RCB3                (1 << 3)
+#define AT91_MATRIX_RCB4                (1 << 4)
+#define AT91_MATRIX_RCB5                (1 << 5)
+#define AT91_MATRIX_RCB6                (1 << 6)
+#define AT91_MATRIX_RCB7                (1 << 7)
+#define AT91_MATRIX_RCB8                (1 << 8)
+#define AT91_MATRIX_RCB9                (1 << 9)
+#define AT91_MATRIX_RCB10               (1 << 10)
+
+#define AT91_MATRIX_EBI_CS1A_SMC                (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC             (1 << 1)
+#define AT91_MATRIX_EBI_CS3A_SMC                (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA     (1 << 3)
+#define AT91_MATRIX_EBI_DBPU_ON                 (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF                (1 << 8)
+#define AT91_MATRIX_EBI_DBPD_ON                 (0 << 9)
+#define AT91_MATRIX_EBI_DBPD_OFF                (1 << 9)
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V          (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V          (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED        (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL         (1 << 17)
+#define AT91_MATRIX_NFD0_ON_D0                  (0 << 24)
+#define AT91_MATRIX_NFD0_ON_D16                 (1 << 24)
+#define AT91_MATRIX_MP_OFF                      (0 << 25)
+#define AT91_MATRIX_MP_ON                       (1 << 25)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_mpddrc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
new file mode 100644
index 000000000..40ec87e2f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
@@ -0,0 +1,232 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#ifndef __ATMEL_MPDDRC_H__
+#define __ATMEL_MPDDRC_H__
+
+struct atmel_mpddrc_config {
+	u32 mr;
+	u32 rtr;
+	u32 cr;
+	u32 tpr0;
+	u32 tpr1;
+	u32 tpr2;
+	u32 md;
+	u32 lpddr23_lpr;
+	u32 cal_mr4;
+	u32 tim_cal;
+};
+
+/*
+ * Only define the needed register in mpddr
+ * If other register needed, will add them later
+ */
+struct atmel_mpddr {
+	u32 mr;			/* 0x00: Mode Register */
+	u32 rtr;		/* 0x04: Refresh Timer Register */
+	u32 cr;			/* 0x08: Configuration Register */
+	u32 tpr0;		/* 0x0c: Timing Parameter 0 Register */
+	u32 tpr1;		/* 0x10: Timing Parameter 1 Register */
+	u32 tpr2;		/* 0x14: Timing Parameter 2 Register */
+	u32 reserved;		/* 0x18: Reserved */
+	u32 lpr;		/* 0x1c: Low-power Register */
+	u32 md;			/* 0x20: Memory Device Register */
+	u32 reserved1;		/* 0x24: Reserved */
+	u32 lpddr23_lpr;	/* 0x28: LPDDR2-LPDDR3 Low-power Register*/
+	u32 cal_mr4;		/* 0x2c: Calibration and MR4 Register */
+	u32 tim_cal;		/* 0x30: Timing Calibration Register */
+	u32 io_calibr;		/* 0x34: IO Calibration */
+	u32 ocms;		/* 0x38: OCMS Register */
+	u32 ocms_key1;		/* 0x3c: OCMS KEY1 Register */
+	u32 ocms_key2;		/* 0x40: OCMS KEY2 Register */
+	u32 conf_arbiter;	/* 0x44: Configuration Arbiter Register */
+	u32 timeout;		/* 0x48: Timeout Port 0/1/2/3 Register */
+	u32 req_port0123;	/* 0x4c: Request Port 0/1/2/3 Register */
+	u32 req_port4567;	/* 0x50: Request Port 4/5/6/7 Register */
+	u32 bdw_port0123;	/* 0x54: Bandwidth Port 0/1/2/3 Register */
+	u32 bdw_port4567;	/* 0x58: Bandwidth Port 4/5/6/7 Register */
+	u32 rd_data_path;	/* 0x5c: Read Datapath Register */
+	u32 reserved2[33];
+	u32 wpmr;		/* 0xe4: Write Protection Mode Register */
+	u32 wpsr;		/* 0xe8: Write Protection Status Register */
+	u32 reserved3[4];
+	u32 version;		/* 0xfc: IP version */
+};
+
+
+int ddr2_init(const unsigned int base,
+	      const unsigned int ram_address,
+	      const struct atmel_mpddrc_config *mpddr_value);
+
+int lpddr2_init(const unsigned int base,
+		const unsigned int ram_address,
+		const struct atmel_mpddrc_config *mpddr_value);
+
+int ddr3_init(const unsigned int base,
+	      const unsigned int ram_address,
+	      const struct atmel_mpddrc_config *mpddr_value);
+
+/* Bit field in mode register */
+#define ATMEL_MPDDRC_MR_MODE_NORMAL_CMD		0x0
+#define ATMEL_MPDDRC_MR_MODE_NOP_CMD		0x1
+#define ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD	0x2
+#define ATMEL_MPDDRC_MR_MODE_LMR_CMD		0x3
+#define ATMEL_MPDDRC_MR_MODE_RFSH_CMD		0x4
+#define ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD	0x5
+#define ATMEL_MPDDRC_MR_MODE_DEEP_CMD		0x6
+#define ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD		0x7
+#define ATMEL_MPDDRC_MR_MRS(v)			(((v) & 0xFF) << 0x8)
+
+/* Bit field in refresh timer register */
+#define ATMEL_MPDDRC_RTR_ADJ_REF		(0x1 << 16)
+#define ATMEL_MPDDRC_RTR_MR4VALUE(v)		(((v) & 0x7) << 20)
+
+/* Bit field in configuration register */
+#define ATMEL_MPDDRC_CR_NC_MASK			0x3
+#define ATMEL_MPDDRC_CR_NC_COL_9		0x0
+#define ATMEL_MPDDRC_CR_NC_COL_10		0x1
+#define ATMEL_MPDDRC_CR_NC_COL_11		0x2
+#define ATMEL_MPDDRC_CR_NC_COL_12		0x3
+#define ATMEL_MPDDRC_CR_NR_MASK			(0x3 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_11		(0x0 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_12		(0x1 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_13		(0x2 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_14		(0x3 << 2)
+#define ATMEL_MPDDRC_CR_CAS_MASK		(0x7 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS2		(0x2 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS3		(0x3 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS4		(0x4 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS5		(0x5 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS6		(0x6 << 4)
+#define ATMEL_MPDDRC_CR_DLL_RESET_ENABLED	(0x1 << 7)
+#define ATMEL_MPDDRC_CR_DIC_DS			(0x1 << 8)
+#define ATMEL_MPDDRC_CR_DIS_DLL			(0x1 << 9)
+#define ATMEL_MPDDRC_CR_ZQ_INIT			(0x0 << 10)
+#define ATMEL_MPDDRC_CR_ZQ_LONG			(0x1 << 10)
+#define ATMEL_MPDDRC_CR_ZQ_SHORT		(0x2 << 10)
+#define ATMEL_MPDDRC_CR_ZQ_RESET		(0x3 << 10)
+#define ATMEL_MPDDRC_CR_OCD_DEFAULT		(0x7 << 12)
+#define ATMEL_MPDDRC_CR_DQMS_SHARED		(0x1 << 16)
+#define ATMEL_MPDDRC_CR_ENRDM_ON		(0x1 << 17)
+#define ATMEL_MPDDRC_CR_NB_8BANKS		(0x1 << 20)
+#define ATMEL_MPDDRC_CR_NDQS_DISABLED		(0x1 << 21)
+#define ATMEL_MPDDRC_CR_DECOD_INTERLEAVED	(0x1 << 22)
+#define ATMEL_MPDDRC_CR_UNAL_SUPPORTED		(0x1 << 23)
+
+/* Bit field in timing parameter 0 register */
+#define ATMEL_MPDDRC_TPR0_TRAS_OFFSET		0
+#define ATMEL_MPDDRC_TPR0_TRAS_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TRCD_OFFSET		4
+#define ATMEL_MPDDRC_TPR0_TRCD_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TWR_OFFSET		8
+#define ATMEL_MPDDRC_TPR0_TWR_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TRC_OFFSET		12
+#define ATMEL_MPDDRC_TPR0_TRC_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TRP_OFFSET		16
+#define ATMEL_MPDDRC_TPR0_TRP_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TRRD_OFFSET		20
+#define ATMEL_MPDDRC_TPR0_TRRD_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TWTR_OFFSET		24
+#define ATMEL_MPDDRC_TPR0_TWTR_MASK		0x7
+#define ATMEL_MPDDRC_TPR0_RDC_WRRD_OFFSET	27
+#define ATMEL_MPDDRC_TPR0_RDC_WRRD_MASK		0x1
+#define ATMEL_MPDDRC_TPR0_TMRD_OFFSET		28
+#define ATMEL_MPDDRC_TPR0_TMRD_MASK		0xf
+
+/* Bit field in timing parameter 1 register */
+#define ATMEL_MPDDRC_TPR1_TRFC_OFFSET		0
+#define ATMEL_MPDDRC_TPR1_TRFC_MASK		0x7f
+#define ATMEL_MPDDRC_TPR1_TXSNR_OFFSET		8
+#define ATMEL_MPDDRC_TPR1_TXSNR_MASK		0xff
+#define ATMEL_MPDDRC_TPR1_TXSRD_OFFSET		16
+#define ATMEL_MPDDRC_TPR1_TXSRD_MASK		0xff
+#define ATMEL_MPDDRC_TPR1_TXP_OFFSET		24
+#define ATMEL_MPDDRC_TPR1_TXP_MASK		0xf
+
+/* Bit field in timing parameter 2 register */
+#define ATMEL_MPDDRC_TPR2_TXARD_OFFSET		0
+#define ATMEL_MPDDRC_TPR2_TXARD_MASK		0xf
+#define ATMEL_MPDDRC_TPR2_TXARDS_OFFSET		4
+#define ATMEL_MPDDRC_TPR2_TXARDS_MASK		0xf
+#define ATMEL_MPDDRC_TPR2_TRPA_OFFSET		8
+#define ATMEL_MPDDRC_TPR2_TRPA_MASK		0xf
+#define ATMEL_MPDDRC_TPR2_TRTP_OFFSET		12
+#define ATMEL_MPDDRC_TPR2_TRTP_MASK		0x7
+#define ATMEL_MPDDRC_TPR2_TFAW_OFFSET		16
+#define ATMEL_MPDDRC_TPR2_TFAW_MASK		0xf
+
+/* Bit field in Memory Device Register */
+#define ATMEL_MPDDRC_MD_SDR_SDRAM	0x0
+#define ATMEL_MPDDRC_MD_LP_SDR_SDRAM	0x1
+#define ATMEL_MPDDRC_MD_DDR_SDRAM	0x2
+#define ATMEL_MPDDRC_MD_LPDDR_SDRAM	0x3
+#define ATMEL_MPDDRC_MD_DDR3_SDRAM	0x4
+#define ATMEL_MPDDRC_MD_LPDDR3_SDRAM	0x5
+#define ATMEL_MPDDRC_MD_DDR2_SDRAM	0x6
+#define ATMEL_MPDDRC_MD_LPDDR2_SDRAM	0x7
+#define ATMEL_MPDDRC_MD_DBW_MASK	(0x1 << 4)
+#define ATMEL_MPDDRC_MD_DBW_32_BITS	(0x0 << 4)
+#define ATMEL_MPDDRC_MD_DBW_16_BITS	(0x1 << 4)
+
+/* Bit field in I/O Calibration Register */
+#define ATMEL_MPDDRC_IO_CALIBR_RDIV		0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_34_3	0x1
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_40	0x2
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_48	0x3
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_60	0x4
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_80	0x6
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_120	0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_35	0x2
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_43	0x3
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_52	0x4
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_70	0x6
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_105	0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_37	0x2
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_44	0x3
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55	0x4
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_73	0x6
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_110	0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_37	0x2
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_44	0x3
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55	0x4
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_73	0x6
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_110	0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_TZQIO		(0x7f << 8)
+#define ATMEL_MPDDRC_IO_CALIBR_TZQIO_(x)	(((x) & 0x7f) << 8)
+
+#define ATMEL_MPDDRC_IO_CALIBR_CALCODEP		(0xf << 16)
+#define ATMEL_MPDDRC_IO_CALIBR_CALCODEP_(x)	(((x) & 0xf) << 16)
+#define ATMEL_MPDDRC_IO_CALIBR_CALCODEN		(0xf << 20)
+#define ATMEL_MPDDRC_IO_CALIBR_CALCODEN_(x)	(((x) & 0xf) << 20)
+
+#define ATMEL_MPDDRC_IO_CALIBR_EN_CALIB		(0x1 << 4)
+
+/* Bit field in Read Data Path Register */
+#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_SAMPLING	0x3
+#define ATMEL_MPDDRC_RD_DATA_PATH_NO_SHIFT		0x0
+#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_ONE_CYCLE	0x1
+#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE	0x2
+#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_THREE_CYCLE	0x3
+
+/* Bit field in LPDDR2 - LPDDR3 Low Power Register */
+#define ATMEL_MPDDRC_LPDDR23_LPR_DS(x)			(((x) & 0xf) << 24)
+
+/* Bit field in CAL_MR4 Calibration and MR4 Register */
+#define ATMEL_MPDDRC_CAL_MR4_COUNT_CAL(x)		(((x) & 0xffff) << 0)
+#define ATMEL_MPDDRC_CAL_MR4_MR4R(x)			(((x) & 0xffff) << 16)
+
+/* Bit field in TIM_CAL Timing Calibration Register */
+#define ATMEL_MPDDRC_CALR_ZQCS(x)			(((x) & 0xff) << 0)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_pio4.h b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_pio4.h
new file mode 100644
index 000000000..c3bd9140d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_pio4.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Atmel Corporation.
+ *		      Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#ifndef __ATMEL_PIO4_H
+#define __ATMEL_PIO4_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+struct atmel_pio4_port {
+	u32 mskr;		/* 0x00 PIO Mask Register */
+	u32 cfgr;		/* 0x04 PIO Configuration Register */
+	u32 pdsr;		/* 0x08 PIO Pin Data Status Register */
+	u32 locksr;		/* 0x0C PIO Lock Status Register */
+	u32 sodr;		/* 0x10 PIO Set Output Data Register */
+	u32 codr;		/* 0x14 PIO Clear Output Data Register */
+	u32 odsr;		/* 0x18 PIO Output Data Status Register */
+	u32 reserved0;
+	u32 ier;		/* 0x20 PIO Interrupt Enable Register */
+	u32 idr;		/* 0x24 PIO Interrupt Disable Register */
+	u32 imr;		/* 0x28 PIO Interrupt Mask Register */
+	u32 isr;		/* 0x2C PIO Interrupt Status Register */
+	u32 reserved1[3];
+	u32 iofr;		/* 0x3C PIO I/O Freeze Register */
+};
+
+#endif
+
+/*
+ * PIO Configuration Register Fields
+ */
+#define ATMEL_PIO_CFGR_FUNC_MASK	GENMASK(2, 0)
+#define ATMEL_PIO_CFGR_FUNC_GPIO	(0x0 << 0)
+#define ATMEL_PIO_CFGR_FUNC_PERIPH_A	(0x1 << 0)
+#define ATMEL_PIO_CFGR_FUNC_PERIPH_B	(0x2 << 0)
+#define ATMEL_PIO_CFGR_FUNC_PERIPH_C	(0x3 << 0)
+#define ATMEL_PIO_CFGR_FUNC_PERIPH_D	(0x4 << 0)
+#define ATMEL_PIO_CFGR_FUNC_PERIPH_E	(0x5 << 0)
+#define ATMEL_PIO_CFGR_FUNC_PERIPH_F	(0x6 << 0)
+#define ATMEL_PIO_CFGR_FUNC_PERIPH_G	(0x7 << 0)
+#define ATMEL_PIO_DIR_MASK		BIT(8)
+#define ATMEL_PIO_PUEN_MASK		BIT(9)
+#define ATMEL_PIO_PDEN_MASK		BIT(10)
+#define ATMEL_PIO_SR			BIT(11)
+#define ATMEL_PIO_IFEN_MASK		BIT(12)
+#define ATMEL_PIO_IFSCEN_MASK		BIT(13)
+#define ATMEL_PIO_OPD_MASK		BIT(14)
+#define ATMEL_PIO_SCHMITT_MASK		BIT(15)
+#define ATMEL_PIO_DRVSTR_MASK		GENMASK(17, 16)
+#define ATMEL_PIO_DRVSTR_LO		(1 << 16)
+#define ATMEL_PIO_DRVSTR_ME		(2 << 16)
+#define ATMEL_PIO_DRVSTR_HI		(3 << 16)
+#define ATMEL_PIO_DRVSTR_OFFSET		16
+#define ATMEL_PIO_CFGR_EVTSEL_MASK	GENMASK(26, 24)
+#define ATMEL_PIO_CFGR_EVTSEL_FALLING	(0 << 24)
+#define ATMEL_PIO_CFGR_EVTSEL_RISING	(1 << 24)
+#define ATMEL_PIO_CFGR_EVTSEL_BOTH	(2 << 24)
+#define ATMEL_PIO_CFGR_EVTSEL_LOW	(3 << 24)
+#define ATMEL_PIO_CFGR_EVTSEL_HIGH	(4 << 24)
+
+#define ATMEL_PIO_NPINS_PER_BANK	32
+#define ATMEL_PIO_BANK(pin_id)		(pin_id / ATMEL_PIO_NPINS_PER_BANK)
+#define ATMEL_PIO_LINE(pin_id)		(pin_id % ATMEL_PIO_NPINS_PER_BANK)
+#define ATMEL_PIO_BANK_OFFSET		0x40
+
+#define ATMEL_GET_PIN_NO(pinfunc)	((pinfunc) & 0xff)
+#define ATMEL_GET_PIN_FUNC(pinfunc)	((pinfunc >> 16) & 0xf)
+#define ATMEL_GET_PIN_IOSET(pinfunc)	((pinfunc >> 20) & 0xf)
+
+#define AT91_PIO_PORTA		0x0
+#define AT91_PIO_PORTB		0x1
+#define AT91_PIO_PORTC		0x2
+#define AT91_PIO_PORTD		0x3
+
+int atmel_pio4_set_gpio(u32 port, u32 pin, u32 config);
+int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 config);
+int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 config);
+int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 config);
+int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 config);
+int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 config);
+int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 config);
+int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 config);
+int atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value);
+int atmel_pio4_get_pio_input(u32 port, u32 pin);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_sdhci.h b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_sdhci.h
new file mode 100644
index 000000000..48b6bd223
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_sdhci.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2015 Atmel Corporation
+ *		      Wenyou.Yang <wenyou.yang@atmel.com>
+ */
+
+#ifndef __ATMEL_SDHCI_H
+#define __ATMEL_SDHCI_H
+
+int atmel_sdhci_init(void *regbase, u32 id);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_serial.h b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_serial.h
new file mode 100644
index 000000000..5d1426936
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_serial.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2014 Google, Inc
+ */
+
+#ifndef _ATMEL_SERIAL_H
+#define _ATMEL_SERIAL_H
+
+/* Information about a serial port */
+struct atmel_serial_plat {
+	uint32_t base_addr;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_usba_udc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
new file mode 100644
index 000000000..835b47d91
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2005-2013 Atmel Corporation
+ *			   Bo Shen <voice.shen@atmel.com>
+ */
+
+#ifndef __ATMEL_USBA_UDC_H__
+#define __ATMEL_USBA_UDC_H__
+
+#include <linux/usb/atmel_usba_udc.h>
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)		\
+	[idx] = {					\
+		.name	= nam,				\
+		.index	= idx,				\
+		.fifo_size	= maxpkt,		\
+		.nr_banks	= maxbk,		\
+		.can_dma	= dma,			\
+		.can_isoc	= isoc,			\
+	}
+
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
+	defined(CONFIG_AT91SAM9X5)
+static struct usba_ep_data usba_udc_ep[] = {
+	EP("ep0", 0, 64, 1, 0, 0),
+	EP("ep1", 1, 1024, 2, 1, 1),
+	EP("ep2", 2, 1024, 2, 1, 1),
+	EP("ep3", 3, 1024, 3, 1, 0),
+	EP("ep4", 4, 1024, 3, 1, 0),
+	EP("ep5", 5, 1024, 3, 1, 1),
+	EP("ep6", 6, 1024, 3, 1, 1),
+};
+#elif defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
+	defined(CONFIG_SAMA5D4)
+static struct usba_ep_data usba_udc_ep[] = {
+	EP("ep0", 0, 64, 1, 0, 0),
+	EP("ep1", 1, 1024, 3, 1, 0),
+	EP("ep2", 2, 1024, 3, 1, 0),
+	EP("ep3", 3, 1024, 2, 1, 0),
+	EP("ep4", 4, 1024, 2, 1, 0),
+	EP("ep5", 5, 1024, 2, 1, 0),
+	EP("ep6", 6, 1024, 2, 1, 0),
+	EP("ep7", 7, 1024, 2, 1, 0),
+	EP("ep8", 8, 1024, 2, 0, 0),
+	EP("ep9", 9, 1024, 2, 0, 0),
+	EP("ep10", 10, 1024, 2, 0, 0),
+	EP("ep11", 11, 1024, 2, 0, 0),
+	EP("ep12", 12, 1024, 2, 0, 0),
+	EP("ep13", 13, 1024, 2, 0, 0),
+	EP("ep14", 14, 1024, 2, 0, 0),
+	EP("ep15", 15, 1024, 2, 0, 0),
+};
+#else
+# error "NO usba_udc_ep defined"
+#endif
+
+#undef EP
+
+struct usba_platform_data pdata = {
+	.num_ep	= ARRAY_SIZE(usba_udc_ep),
+	.ep	= usba_udc_ep,
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/clk.h b/roms/u-boot/arch/arm/mach-at91/include/mach/clk.h
new file mode 100644
index 000000000..c1d92739e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/clk.h
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+#ifndef __ASM_ARM_ARCH_CLK_H__
+#define __ASM_ARM_ARCH_CLK_H__
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/global_data.h>
+
+#define GCK_CSS_SLOW_CLK	0
+#define GCK_CSS_MAIN_CLK	1
+#define GCK_CSS_PLLA_CLK	2
+#define GCK_CSS_UPLL_CLK	3
+#define GCK_CSS_MCK_CLK		4
+#define GCK_CSS_AUDIO_CLK	5
+
+#define AT91_UTMI_PLL_CLK_FREQ	480000000
+
+static inline unsigned long get_cpu_clk_rate(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	return gd->arch.cpu_clk_rate_hz;
+}
+
+static inline unsigned long get_main_clk_rate(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	return gd->arch.main_clk_rate_hz;
+}
+
+static inline unsigned long get_mck_clk_rate(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	return gd->arch.mck_rate_hz;
+}
+
+static inline unsigned long get_plla_clk_rate(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	return gd->arch.plla_rate_hz;
+}
+
+static inline unsigned long get_pllb_clk_rate(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	return gd->arch.pllb_rate_hz;
+}
+
+static inline u32 get_pllb_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	return gd->arch.at91_pllb_usb_init;
+}
+
+#ifdef CPU_HAS_H32MXDIV
+static inline unsigned int get_h32mxdiv(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	return readl(&pmc->mckr) & AT91_PMC_MCKR_H32MXDIV;
+}
+#else
+static inline unsigned int get_h32mxdiv(void)
+{
+	return 0;
+}
+#endif
+
+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
+{
+	if (get_h32mxdiv())
+		return get_mck_clk_rate() / 2;
+	else
+		return get_mck_clk_rate();
+}
+
+static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
+{
+	if (get_h32mxdiv())
+		return get_mck_clk_rate() / 2;
+	else
+		return get_mck_clk_rate();
+}
+
+static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
+{
+	return get_mck_clk_rate();
+}
+
+static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
+{
+	if (get_h32mxdiv())
+		return get_mck_clk_rate() / 2;
+	else
+		return get_mck_clk_rate();
+}
+
+static inline unsigned long get_twi_clk_rate(unsigned int dev_id)
+{
+	if (get_h32mxdiv())
+		return get_mck_clk_rate() / 2;
+	else
+		return get_mck_clk_rate();
+}
+
+static inline unsigned long get_mci_clk_rate(void)
+{
+	if (get_h32mxdiv())
+		return get_mck_clk_rate() / 2;
+	else
+		return get_mck_clk_rate();
+}
+
+static inline unsigned long get_pit_clk_rate(void)
+{
+	if (get_h32mxdiv())
+		return get_mck_clk_rate() / 2;
+	else
+		return get_mck_clk_rate();
+}
+
+int at91_clock_init(unsigned long main_clock);
+void at91_periph_clk_enable(int id);
+void at91_periph_clk_disable(int id);
+int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div);
+u32 at91_get_periph_generated_clk(u32 id);
+void at91_system_clk_enable(int sys_clk);
+void at91_system_clk_disable(int sys_clk);
+int at91_upll_clk_enable(void);
+int at91_upll_clk_disable(void);
+void at91_usb_clk_init(u32 value);
+int at91_pllb_clk_enable(u32 pllbr);
+int at91_pllb_clk_disable(void);
+void at91_pllicpr_init(u32 icpr);
+
+#endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-at91/include/mach/gpio.h
new file mode 100644
index 000000000..c1aef798b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/gpio.h
@@ -0,0 +1,261 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/gpio.h]
+ *
+ *  Copyright (C) 2005 HP Labs
+ */
+
+#ifndef __ASM_ARCH_AT91_GPIO_H
+#define __ASM_ARCH_AT91_GPIO_H
+
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/hardware.h>
+
+#ifdef CONFIG_ATMEL_LEGACY
+
+#define PIN_BASE		0
+
+#define MAX_GPIO_BANKS		5
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
+static unsigned long at91_pios[] = {
+	ATMEL_BASE_PIOA,
+	ATMEL_BASE_PIOB,
+	ATMEL_BASE_PIOC,
+#ifdef ATMEL_BASE_PIOD
+	ATMEL_BASE_PIOD,
+#ifdef ATMEL_BASE_PIOE
+	ATMEL_BASE_PIOE
+#endif
+#endif
+};
+
+static inline void *pin_to_controller(unsigned pin)
+{
+	pin -= PIN_BASE;
+	pin /= 32;
+	return (void *)(at91_pios[pin]);
+}
+
+static inline unsigned pin_to_mask(unsigned pin)
+{
+	pin -= PIN_BASE;
+	return 1 << (pin % 32);
+}
+
+/* The following macros are need for backward compatibility */
+#define at91_set_GPIO_periph(x, y) \
+	at91_set_pio_periph((x - PIN_BASE) / 32,(x % 32), y)
+#define at91_set_A_periph(x, y) \
+	at91_set_a_periph((x - PIN_BASE) / 32,(x % 32), y)
+#define at91_set_B_periph(x, y) \
+	at91_set_b_periph((x - PIN_BASE) / 32,(x % 32), y)
+#define at91_set_gpio_deglitch(x, y) \
+	at91_set_pio_deglitch((x - PIN_BASE) / 32,(x % 32), y)
+#define at91_set_gpio_output(x, y) \
+	at91_set_pio_output((x - PIN_BASE) / 32,(x % 32), y)
+#define at91_set_gpio_input(x, y) \
+	at91_set_pio_input((x - PIN_BASE) / 32,(x % 32), y)
+#endif
+
+#define at91_set_gpio_value(x, y) \
+	at91_set_pio_value((x / 32), (x % 32), y)
+#define at91_get_gpio_value(x)	\
+	at91_get_pio_value((x / 32), (x % 32))
+
+#define GPIO_PIOA_BASE  (0)
+#define GPIO_PIOB_BASE  (GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE  (GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE  (GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE  (GPIO_PIOD_BASE + 32)
+#define GPIO_PIN_PA(x)  (GPIO_PIOA_BASE + (x))
+#define GPIO_PIN_PB(x)  (GPIO_PIOB_BASE + (x))
+#define GPIO_PIN_PC(x)  (GPIO_PIOC_BASE + (x))
+#define GPIO_PIN_PD(x)  (GPIO_PIOD_BASE + (x))
+#define GPIO_PIN_PE(x)  (GPIO_PIOE_BASE + (x))
+
+static inline unsigned at91_gpio_to_port(unsigned gpio)
+{
+	return gpio / 32;
+}
+
+static inline unsigned at91_gpio_to_pin(unsigned gpio)
+{
+	return gpio % 32;
+}
+
+/* Platform data for each GPIO port */
+struct at91_port_plat {
+	uint32_t base_addr;
+	const char *bank_name;
+};
+
+#endif /* __ASM_ARCH_AT91_GPIO_H */
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/hardware.h b/roms/u-boot/arch/arm/mach-at91/include/mach/hardware.h
new file mode 100644
index 000000000..0a16c8ff0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/hardware.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+#ifndef __ASM_ARM_ARCH_HARDWARE_H__
+#define __ASM_ARM_ARCH_HARDWARE_H__
+
+#if defined(CONFIG_AT91RM9200)
+# include <asm/arch/at91rm9200.h>
+#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9XE)
+# include <asm/arch/at91sam9260.h>
+#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
+# include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_AT91SAM9263)
+# include <asm/arch/at91sam9263.h>
+#elif defined(CONFIG_AT91SAM9RL)
+# include <asm/arch/at91sam9rl.h>
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+# include <asm/arch/at91sam9g45.h>
+#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
+# include <asm/arch/at91sam9x5.h>
+#elif defined(CONFIG_SAM9X60)
+# include <asm/arch/sam9x60.h>
+#elif defined(CONFIG_SAMA7G5)
+# include <asm/arch/sama7g5.h>
+#elif defined(CONFIG_SAMA5D2)
+# include <asm/arch/sama5d2.h>
+#elif defined(CONFIG_SAMA5D3)
+# include <asm/arch/sama5d3.h>
+#elif defined(CONFIG_SAMA5D4)
+# include <asm/arch/sama5d4.h>
+#else
+# error "Unsupported AT91 processor"
+#endif
+
+#endif /* __ASM_ARM_ARCH_HARDWARE_H__ */
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sam9x60.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sam9x60.h
new file mode 100644
index 000000000..c08d19c69
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sam9x60.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Chip-specific header file for the SAM9X60 SoC.
+ *
+ * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
+ */
+
+#ifndef __SAM9X60_H__
+#define __SAM9X60_H__
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ		0	/* Advanced Interrupt Controller */
+#define ATMEL_ID_SYS		1	/* System Controller Interrupt */
+#define ATMEL_ID_PIOA		2	/* Parallel I/O Controller A */
+#define ATMEL_ID_PIOB		3	/* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC		4	/* Parallel I/O Controller C */
+#define ATMEL_ID_FLEXCOM0	5	/* FLEXCOM 0 */
+#define ATMEL_ID_FLEXCOM1	6	/* FLEXCOM 1 */
+#define ATMEL_ID_FLEXCOM2	7	/* FLEXCOM 2 */
+#define ATMEL_ID_FLEXCOM3	8	/* FLEXCOM 3 */
+#define ATMEL_ID_FLEXCOM6	9	/* FLEXCOM 6 */
+#define ATMEL_ID_FLEXCOM7	10	/* FLEXCOM 7 */
+#define ATMEL_ID_FLEXCOM8	11	/* FLEXCOM 8 */
+#define ATMEL_ID_SDMMC0		12	/* SDMMC 0 */
+#define ATMEL_ID_FLEXCOM4	13	/* FLEXCOM 4 */
+#define ATMEL_ID_FLEXCOM5	14	/* FLEXCOM 5 */
+#define ATMEL_ID_FLEXCOM9	15	/* FLEXCOM 9 */
+#define ATMEL_ID_FLEXCOM10	16	/* FLEXCOM 10 */
+#define ATMEL_ID_TC01		17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define ATMEL_ID_PWM		18	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_ADC		19	/* ADC Controller */
+#define ATMEL_ID_XDMAC0		20	/* XDMA Controller 0 */
+#define ATMEL_ID_MATRIX		21	/* BUS Matrix */
+#define ATMEL_ID_UHPHS		22	/* USB Host High Speed */
+#define ATMEL_ID_UDPHS		23	/* USB Device High Speed */
+#define ATMEL_ID_EMAC0		24	/* Ethernet MAC 0 */
+#define ATMEL_ID_LCDC		25	/* LCD Controller */
+#define ATMEL_ID_SDMMC1		26	/* SDMMC 1 */
+#define ATMEL_ID_EMAC1		27	/* Ethernet MAC `1 */
+#define ATMEL_ID_SSC		28	/* Synchronous Serial Controller */
+#define ATMEL_ID_IRQ		31	/* Advanced Interrupt Controller */
+#define ATMEL_ID_TRNG		38	/* True Random Number Generator */
+#define ATMEL_ID_PIOD		44	/* Parallel I/O Controller D */
+#define ATMEL_ID_DBGU		47	/* Debug unit */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define ATMEL_BASE_FLEXCOM4	0xf0000000
+#define ATMEL_BASE_FLEXCOM5	0xf0004000
+#define ATMEL_BASE_XDMA0	0xf0008000
+#define ATMEL_BASE_SSC		0xf0010000
+#define ATMEL_BASE_QSPI		0xf0014000
+#define ATMEL_BASE_CAN0		0xf8000000
+#define ATMEL_BASE_CAN1		0xf8004000
+#define ATMEL_BASE_TC0		0xf8008000
+#define ATMEL_BASE_TC1		0xf8008040
+#define ATMEL_BASE_TC2		0xf8008080
+#define ATMEL_BASE_TC3		0xf800c000
+#define ATMEL_BASE_TC4		0xf800c040
+#define ATMEL_BASE_TC5		0xf800c080
+#define ATMEL_BASE_FLEXCOM6	0xf8010000
+#define ATMEL_BASE_FLEXCOM7	0xf8014000
+#define ATMEL_BASE_FLEXCOM8	0xf8018000
+#define ATMEL_BASE_FLEXCOM0	0xf801c000
+#define ATMEL_BASE_FLEXCOM1	0xf8020000
+#define ATMEL_BASE_FLEXCOM2	0xf8024000
+#define ATMEL_BASE_FLEXCOM3	0xf8028000
+#define ATMEL_BASE_EMAC0	0xf802c000
+#define ATMEL_BASE_EMAC1	0xf8030000
+#define ATMEL_BASE_PWM		0xf8034000
+#define ATMEL_BASE_LCDC		0xf8038000
+#define ATMEL_BASE_UDPHS	0xf803c000
+#define ATMEL_BASE_FLEXCOM9	0xf8040000
+#define ATMEL_BASE_FLEXCOM10 0xf8044000
+#define ATMEL_BASE_ISI		0xf8048000
+#define ATMEL_BASE_ADC		0xf804c000
+#define ATMEL_BASE_SFR		0xf8050000
+#define ATMEL_BASE_SYS		0xffffc000
+
+/*
+ * System Peripherals
+ */
+#define ATMEL_BASE_MATRIX	0xffffde00
+#define ATMEL_BASE_PMECC	0xffffe000
+#define ATMEL_BASE_PMERRLOC	0xffffe600
+#define ATMEL_BASE_MPDDRC	0xffffe800
+#define ATMEL_BASE_SMC		0xffffea00
+#define ATMEL_BASE_SDRAMC	0xffffec00
+#define ATMEL_BASE_AIC		0xfffff100
+#define ATMEL_BASE_DBGU		0xfffff200
+#define ATMEL_BASE_PIOA		0xfffff400
+#define ATMEL_BASE_PIOB		0xfffff600
+#define ATMEL_BASE_PIOC		0xfffff800
+#define ATMEL_BASE_PIOD		0xfffffa00
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffe00
+#define ATMEL_BASE_SHDWC	0xfffffe10
+#define ATMEL_BASE_PIT		0xfffffe40
+#define ATMEL_BASE_GPBR		0xfffffe60
+#define ATMEL_BASE_RTC		0xfffffea8
+#define ATMEL_BASE_WDT		0xffffff80
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM		0x00100000 /* Internal ROM base address */
+#define ATMEL_BASE_SRAM		0x00300000 /* Internal SRAM base address */
+#define ATMEL_BASE_UDPHS_FIFO	0x00500000 /* USB Device HS controller */
+#define ATMEL_BASE_OHCI		0x00600000 /* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00700000 /* USB Host controller (EHCI) */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000
+#define ATMEL_BASE_CS1		0x20000000
+#define ATMEL_BASE_CS2		0x30000000
+#define ATMEL_BASE_CS3		0x40000000
+#define ATMEL_BASE_CS4		0x50000000
+#define ATMEL_BASE_CS5		0x60000000
+#define ATMEL_BASE_SDMMC0	0x80000000
+#define ATMEL_BASE_SDMMC1	0x90000000
+
+/* 9x60 series chip id definitions */
+#define ARCH_ID_SAM9X60		0x819b35a0
+#define ARCH_ID_VERSION_MASK	0x1f
+#define ARCH_EXID_SAM9X60	0x00000000
+#define ARCH_EXID_SAM9X60_D6K	0x00000011
+#define ARCH_EXID_SAM9X60_D5M	0x00000001
+#define ARCH_EXID_SAM9X60_D1G	0x00000010
+
+#define cpu_is_sam9x60()	(get_chip_id() == ARCH_ID_SAM9X60)
+
+/*
+ * Cpu Name
+ */
+#define ATMEL_CPU_NAME	get_cpu_name()
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfffffe4c
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS	4
+#define CPU_HAS_PCR
+#define CPU_NO_PLLB
+#define PLL_ID_PLLA 0
+#define PLL_ID_UPLL 1
+
+/*
+ * PMECC table in ROM
+ */
+#define ATMEL_PMECC_INDEX_OFFSET_512	0x0000
+#define ATMEL_PMECC_INDEX_OFFSET_1024	0x8000
+
+/*
+ * SAM9X60 specific prototypes
+ */
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_emac1(void);
+unsigned int has_emac0(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sama5_boot.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5_boot.h
new file mode 100644
index 000000000..db7531bb1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5_boot.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Boot mode definitions for the SAMA5Dx SoC
+ *
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ */
+
+#ifndef __SAMA5_BOOT_H
+#define __SAMA5_BOOT_H
+
+/* Boot modes stored by BootROM in r4 */
+#define ATMEL_SAMA5_BOOT_FROM_OFF	0
+#define ATMEL_SAMA5_BOOT_FROM_MASK	0xf
+#define ATMEL_SAMA5_BOOT_FROM_SPI	(0 << 0)
+#define ATMEL_SAMA5_BOOT_FROM_MCI	(1 << 0)
+#define ATMEL_SAMA5_BOOT_FROM_SMC	(2 << 0)
+#define ATMEL_SAMA5_BOOT_FROM_TWI	(3 << 0)
+#define ATMEL_SAMA5_BOOT_FROM_QSPI	(4 << 0)
+#define ATMEL_SAMA5_BOOT_FROM_SAMBA	(7 << 0)
+
+#define ATMEL_SAMA5_BOOT_DEV_ID_OFF	4
+#define ATMEL_SAMA5_BOOT_DEV_ID_MASK	0xf
+
+#endif /* __SAMA5_BOOT_H */
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sama5_matrix.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5_matrix.h
new file mode 100644
index 000000000..2a92d7016
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5_matrix.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Bus Matrix header file for the SAMA5 family
+ *
+ * Copyright (C) 2014 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ */
+
+#ifndef __SAMA5_MATRIX_H
+#define __SAMA5_MATRIX_H
+
+struct atmel_matrix {
+	u32 mcfg[16];	/* 0x00 ~ 0x3c: Master Configuration Register */
+	u32 scfg[16];	/* 0x40 ~ 0x7c: Slave Configuration Register */
+	u32 pras[16][2];/* 0x80 ~ 0xfc: Priority Register A/B */
+	u32 res1[20];	/* 0x100 ~ 0x14c */
+	u32 meier;	/* 0x150: Master Error Interrupt Enable Register */
+	u32 meidr;	/* 0x154: Master Error Interrupt Disable Register */
+	u32 meimr;	/* 0x158: Master Error Interrupt Mask Register */
+	u32 mesr;	/* 0x15c: Master Error Status Register */
+	u32 mear[16];	/* 0x160 ~ 0x19c: Master Error Address Register */
+	u32 res2[17];	/* 0x1A0 ~ 0x1E0 */
+	u32 wpmr;	/* 0x1E4: Write Protection Mode Register */
+	u32 wpsr;	/* 0x1E8: Write Protection Status Register */
+	u32 res3[5];	/* 0x1EC ~ 0x1FC */
+	u32 ssr[16];	/* 0x200 ~ 0x23c: Security Slave Register */
+	u32 sassr[16];	/* 0x240 ~ 0x27c: Security Areas Split Slave Register */
+	u32 srtsr[16];	/* 0x280 ~ 0x2bc: Security Region Top Slave */
+	u32 spselr[3];	/* 0x2c0 ~ 0x2c8: Security Peripheral Select Register */
+};
+
+/* Bit field in WPMR */
+#define ATMEL_MATRIX_WPMR_WPKEY	0x4D415400
+#define ATMEL_MATRIX_WPMR_WPEN	0x00000001
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d2.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d2.h
new file mode 100644
index 000000000..d1b2e01cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d2.h
@@ -0,0 +1,246 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Chip-specific header file for the SAMA5D2 SoC
+ *
+ * Copyright (C) 2015 Atmel
+ *		      Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#ifndef __SAMA5D2_H
+#define __SAMA5D2_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ		0	/* FIQ Interrupt ID */
+/* 1 */
+#define ATMEL_ID_ARM		2	/* Performance Monitor Unit */
+#define ATMEL_ID_PIT		3	/* Periodic Interval Timer Interrupt */
+#define ATMEL_ID_WDT		4	/* Watchdog Timer Interrupt */
+#define ATMEL_ID_GMAC		5	/* Ethernet MAC */
+#define ATMEL_ID_XDMAC0		6	/* DMA Controller 0 */
+#define ATMEL_ID_XDMAC1		7	/* DMA Controller 1 */
+#define ATMEL_ID_ICM		8	/* Integrity Check Monitor */
+#define ATMEL_ID_AES		9	/* Advanced Encryption Standard */
+#define ATMEL_ID_AESB		10	/* AES bridge */
+#define ATMEL_ID_TDES		11	/* Triple Data Encryption Standard */
+#define ATMEL_ID_SHA		12	/* SHA Signature */
+#define ATMEL_ID_MPDDRC		13	/* MPDDR Controller */
+#define ATMEL_ID_MATRIX1	14	/* H32MX, 32-bit AHB Matrix */
+#define ATMEL_ID_MATRIX0	15	/* H64MX, 64-bit AHB Matrix */
+#define ATMEL_ID_SECUMOD	16	/* Secure Module */
+#define ATMEL_ID_HSMC		17	/* Multi-bit ECC interrupt */
+#define ATMEL_ID_PIOA		18	/* Parallel I/O Controller A */
+#define ATMEL_ID_FLEXCOM0	19	/* FLEXCOM0 */
+#define ATMEL_ID_FLEXCOM1	20	/* FLEXCOM1 */
+#define ATMEL_ID_FLEXCOM2	21	/* FLEXCOM2 */
+#define ATMEL_ID_FLEXCOM3	22	/* FLEXCOM3 */
+#define ATMEL_ID_FLEXCOM4	23	/* FLEXCOM4 */
+#define ATMEL_ID_UART0		24	/* UART0 */
+#define ATMEL_ID_UART1		25	/* UART1 */
+#define ATMEL_ID_UART2		26	/* UART2 */
+#define ATMEL_ID_UART3		27	/* UART3 */
+#define ATMEL_ID_UART4		28	/* UART4 */
+#define ATMEL_ID_TWIHS0		29	/* Two-wire Interface 0 */
+#define ATMEL_ID_TWIHS1		30	/* Two-wire Interface 1 */
+#define ATMEL_ID_SDMMC0		31	/* Secure Data Memory Card Controller 0 */
+#define ATMEL_ID_SDMMC1		32	/* Secure Data Memory Card Controller 1 */
+#define ATMEL_ID_SPI0		33	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1		34	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_TC0		35	/* Timer Counter 0 (ch.0,1,2) */
+#define ATMEL_ID_TC1		36	/* Timer Counter 1 (ch.3,4,5) */
+/* 37 */
+#define ATMEL_ID_PWM		38	/* PWMController0 (ch. 0,1,2,3) */
+/* 39 */
+#define ATMEL_ID_ADC		40	/* Touch Screen ADC Controller */
+#define ATMEL_ID_UHPHS		41	/* USB Host High Speed */
+#define ATMEL_ID_UDPHS		42	/* USB Device High Speed */
+#define ATMEL_ID_SSC0		43	/* Serial Synchronous Controller 0 */
+#define ATMEL_ID_SSC1		44	/* Serial Synchronous Controller 1 */
+#define ATMEL_ID_LCDC		45	/* LCD Controller */
+#define ATMEL_ID_ISI		46	/* Image Sensor Controller, for A5D2, named after ISC */
+#define ATMEL_ID_TRNG		47	/* True Random Number Generator */
+#define ATMEL_ID_PDMIC		48	/* PDM Interface Controller */
+#define ATMEL_ID_AIC_IRQ	49	/* IRQ Interrupt ID */
+#define ATMEL_ID_SFC		50	/* Fuse Controller */
+#define ATMEL_ID_SECURAM	51	/* Secure RAM */
+#define ATMEL_ID_QSPI0		52	/* QSPI0 */
+#define ATMEL_ID_QSPI1		53	/* QSPI1 */
+#define ATMEL_ID_I2SC0		54	/* Inter-IC Sound Controller 0 */
+#define ATMEL_ID_I2SC1		55	/* Inter-IC Sound Controller 1 */
+#define ATMEL_ID_CAN0_INT0	56	/* MCAN 0 Interrupt0 */
+#define ATMEL_ID_CAN1_INT0	57	/* MCAN 1 Interrupt0 */
+/* 58 */
+#define ATMEL_ID_CLASSD		59	/* Audio Class D Amplifier */
+#define ATMEL_ID_SFR		60	/* Special Function Register */
+#define ATMEL_ID_SAIC		61	/* Secured AIC */
+#define ATMEL_ID_AIC		62	/* Advanced Interrupt Controller */
+#define ATMEL_ID_L2CC		63	/* L2 Cache Controller */
+#define ATMEL_ID_CAN0_INT1	64	/* MCAN 0 Interrupt1 */
+#define ATMEL_ID_CAN1_INT1	65	/* MCAN 1 Interrupt1 */
+#define ATMEL_ID_GMAC_Q1	66	/* GMAC Queue 1 Interrupt */
+#define ATMEL_ID_GMAC_Q2	67	/* GMAC Queue 2 Interrupt */
+#define ATMEL_ID_PIOB		68	/* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC		69	/* Parallel I/O Controller C */
+#define ATMEL_ID_PIOD		70	/* Parallel I/O Controller D */
+#define ATMEL_ID_SDMMC0_TIMER	71	/* Secure Data Memory Card Controller 0 (TIMER) */
+#define ATMEL_ID_SDMMC1_TIMER	72	/* Secure Data Memory Card Controller 1 (TIMER) */
+/* 73 */
+#define ATMEL_ID_SYS		74	/* System Controller Interrupt */
+#define ATMEL_ID_ACC		75	/* Analog Comparator */
+#define ATMEL_ID_RXLP		76	/* UART Low-Power */
+#define ATMEL_ID_SFRBU		77	/* Special Function Register BackUp */
+#define ATMEL_ID_CHIPID		78	/* Chip ID */
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_LCDC		0xf0000000
+#define ATMEL_BASE_XDMAC1	0xf0004000
+#define ATMEL_BASE_MPDDRC	0xf000c000
+#define ATMEL_BASE_XDMAC0	0xf0010000
+#define ATMEL_BASE_PMC		0xf0014000
+#define ATMEL_BASE_MATRIX0	0xf0018000
+#define ATMEL_BASE_QSPI0	0xf0020000
+#define ATMEL_BASE_QSPI1	0xf0024000
+#define ATMEL_BASE_SPI0		0xf8000000
+#define ATMEL_BASE_GMAC		0xf8008000
+#define ATMEL_BASE_TC0		0xf800c000
+#define ATMEL_BASE_TC1		0xf8010000
+#define ATMEL_BASE_HSMC		0xf8014000
+#define ATMEL_BASE_UART0	0xf801c000
+#define ATMEL_BASE_UART1	0xf8020000
+#define ATMEL_BASE_UART2	0xf8024000
+#define ATMEL_BASE_TWI0		0xf8028000
+#define ATMEL_BASE_SFR		0xf8030000
+#define ATMEL_BASE_SYSC		0xf8048000
+#define ATMEL_BASE_SPI1		0xfc000000
+#define ATMEL_BASE_UART3	0xfc008000
+#define ATMEL_BASE_UART4	0xfc00c000
+#define ATMEL_BASE_TWI1		0xfc028000
+#define ATMEL_BASE_UDPHS	0xfc02c000
+
+#define ATMEL_BASE_PIOA		0xfc038000
+#define ATMEL_BASE_MATRIX1	0xfc03c000
+
+#define ATMEL_CHIPID_CIDR	0xfc069000
+#define ATMEL_CHIPID_EXID	0xfc069004
+
+/*
+ * Address Memory Space
+ */
+#define ATMEL_BASE_CS0			0x10000000
+#define ATMEL_BASE_DDRCS		0x20000000
+#define ATMEL_BASE_CS1			0x60000000
+#define ATMEL_BASE_CS2			0x70000000
+#define ATMEL_BASE_CS3			0x80000000
+#define ATMEL_BASE_QSPI0_AES_MEM	0x90000000
+#define ATMEL_BASE_QSPI1_AES_MEM	0x98000000
+#define ATMEL_BASE_SDMMC0		0xa0000000
+#define ATMEL_BASE_SDMMC1		0xb0000000
+#define ATMEL_BASE_QSPI0_MEM		0xd0000000
+#define ATMEL_BASE_QSPI1_MEM		0xd8000000
+
+/*
+ * Internal Memories
+ */
+#define ATMEL_BASE_UDPHS_FIFO	0x00300000	/* USB Device HS controller */
+#define ATMEL_BASE_OHCI		0x00400000	/* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00500000	/* USB Host controller (EHCI) */
+
+/*
+ * SYSC Spawns
+ */
+#define ATMEL_BASE_RSTC		ATMEL_BASE_SYSC
+#define ATMEL_BASE_SHDWC	(ATMEL_BASE_SYSC + 0x10)
+#define ATMEL_BASE_PIT		(ATMEL_BASE_SYSC + 0x30)
+#define ATMEL_BASE_WDT		(ATMEL_BASE_SYSC + 0x40)
+#define ATMEL_BASE_SCKC		(ATMEL_BASE_SYSC + 0x50)
+#define ATMEL_BASE_RTC		(ATMEL_BASE_SYSC + 0xb0)
+
+/*
+ * Other misc definitions
+ */
+#define ATMEL_BASE_PMECC	(ATMEL_BASE_HSMC + 0x70)
+#define ATMEL_BASE_PMERRLOC	(ATMEL_BASE_HSMC + 0x500)
+#define ATMEL_BASE_SMC		(ATMEL_BASE_HSMC + 0x700)
+
+#define ATMEL_BASE_PIOB		(ATMEL_BASE_PIOA + 0x40)
+#define ATMEL_BASE_PIOC		(ATMEL_BASE_PIOB + 0x40)
+#define ATMEL_BASE_PIOD		(ATMEL_BASE_PIOC + 0x40)
+
+#define ATMEL_PIO_PORTS		4
+#define CPU_HAS_PCR
+#define CPU_HAS_H32MXDIV
+
+/* AICREDIR Unlock Key */
+#define ATMEL_SFR_AICREDIR_KEY		0xB6D81C4D
+
+/* MATRIX0(H64MX) slave id definitions */
+#define H64MX_SLAVE_AXIMX_BRIDGE	0	/* Bridge from H64MX to AXIMX */
+#define H64MX_SLAVE_PERIPH_BRIDGE	1	/* H64MX Peripheral Bridge */
+#define H64MX_SLAVE_DDRC_PORT0		2	/* DDR2 Port0-AESOTF */
+#define H64MX_SLAVE_DDRC_PORT1		3	/* DDR2 Port1 */
+#define H64MX_SLAVE_DDRC_PORT2		4	/* DDR2 Port2 */
+#define H64MX_SLAVE_DDRC_PORT3		5	/* DDR2 Port3 */
+#define H64MX_SLAVE_DDRC_PORT4		6	/* DDR2 Port4 */
+#define H64MX_SLAVE_DDRC_PORT5		7	/* DDR2 Port5 */
+#define H64MX_SLAVE_DDRC_PORT6		8	/* DDR2 Port6 */
+#define H64MX_SLAVE_DDRC_PORT7		9	/* DDR2 Port7 */
+#define H64MX_SLAVE_SRAM		10	/* Internal SRAM 128K */
+#define H64MX_SLAVE_CACHE_L2		11	/* Internal SRAM 128K(L2) */
+#define H64MX_SLAVE_QSPI0		12	/* QSPI0 */
+#define H64MX_SLAVE_QSPI1		13	/* QSPI1 */
+#define H64MX_SLAVE_AESB		14	/* AESB */
+
+/* MATRIX1(H32MX) slave id definitions */
+#define H32MX_SLAVE_H64MX_BRIDGE	0	/* Bridge from H32MX to H64MX */
+#define H32MX_SLAVE_PERIPH_BRIDGE0	1	/* H32MX Peripheral Bridge 0 */
+#define H32MX_SLAVE_PERIPH_BRIDGE1	2	/* H32MX Peripheral Bridge 1 */
+#define H32MX_SLAVE_EBI			3	/* External Bus Interface */
+#define H32MX_SLAVE_NFC_CMD		3	/* NFC command Register */
+#define H32MX_SLAVE_NFC_SRAM		4	/* NFC SRAM */
+#define H32MX_SLAVE_USB			5	/* USB Device & Host */
+
+/* SAMA5D2 series chip id definitions */
+#define ARCH_ID_SAMA5D2		0x8a5c08c0
+#define ARCH_EXID_SAMA5D21CU	0x0000005a
+#define ARCH_EXID_SAMA5D22CU	0x00000059
+#define ARCH_EXID_SAMA5D22CN	0x00000069
+#define ARCH_EXID_SAMA5D23CU	0x00000058
+#define ARCH_EXID_SAMA5D24CX	0x00000004
+#define ARCH_EXID_SAMA5D24CU	0x00000014
+#define ARCH_EXID_SAMA5D26CU	0x00000012
+#define ARCH_EXID_SAMA5D27CU	0x00000011
+#define ARCH_EXID_SAMA5D27CN	0x00000021
+#define ARCH_EXID_SAMA5D28CU	0x00000010
+#define ARCH_EXID_SAMA5D28CN	0x00000020
+
+#define ARCH_ID_SAMA5D2_SIP		0x8a5c08c2
+#define ARCH_EXID_SAMA5D225C_D1M	0x00000053
+#define ARCH_EXID_SAMA5D27C_D5M		0x00000032
+#define ARCH_EXID_SAMA5D27C_D1G		0x00000033
+#define ARCH_EXID_SAMA5D27C_LD1G	0x00000061
+#define ARCH_EXID_SAMA5D27C_LD2G	0x00000062
+#define ARCH_EXID_SAMA5D28C_D1G		0x00000013
+#define ARCH_EXID_SAMA5D28C_LD1G	0x00000071
+#define ARCH_EXID_SAMA5D28C_LD2G	0x00000072
+
+/* Checked if defined in ethernet driver macb */
+#define cpu_is_sama5d2	_cpu_is_sama5d2
+
+/* PIT Timer(PIT_PIIR) */
+#define CONFIG_SYS_TIMER_COUNTER	0xf804803c
+
+/* No PMECC Galois table in ROM */
+#define NO_GALOIS_TABLE_IN_ROM
+
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+int _cpu_is_sama5d2(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d2_smc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d2_smc.h
new file mode 100644
index 000000000..928a078f5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d2_smc.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Microchip Corporation.
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on SAMA5D2 datasheet.
+ */
+
+#ifndef SAMA5D2_SMC_H
+#define SAMA5D2_SMC_H
+
+#ifdef __ASSEMBLY__
+#define AT91_ASM_SMC_SETUP0	(ATMEL_BASE_SMC + 0x700)
+#define AT91_ASM_SMC_PULSE0	(ATMEL_BASE_SMC + 0x704)
+#define AT91_ASM_SMC_CYCLE0	(ATMEL_BASE_SMC + 0x708)
+#define AT91_ASM_SMC_TIMINGS0	(ATMEL_BASE_SMC + 0x70c)
+#define AT91_ASM_SMC_MODE0	(ATMEL_BASE_SMC + 0x710)
+#else
+struct at91_cs {
+	u32	setup;		/* 0x600 SMC Setup Register */
+	u32	pulse;		/* 0x604 SMC Pulse Register */
+	u32	cycle;		/* 0x608 SMC Cycle Register */
+	u32	timings;	/* 0x60C SMC Cycle Register */
+	u32	mode;		/* 0x610 SMC Mode Register */
+};
+
+struct at91_smc {
+	struct at91_cs cs[4];
+};
+#endif /*  __ASSEMBLY__ */
+
+#define AT91_SMC_SETUP_NWE(x)		(x & 0x3f)
+#define AT91_SMC_SETUP_NCS_WR(x)	((x & 0x3f) << 8)
+#define AT91_SMC_SETUP_NRD(x)		((x & 0x3f) << 16)
+#define AT91_SMC_SETUP_NCS_RD(x)	((x & 0x3f) << 24)
+
+#define AT91_SMC_PULSE_NWE(x)		(x & 0x7f)
+#define AT91_SMC_PULSE_NCS_WR(x)	((x & 0x7f) << 8)
+#define AT91_SMC_PULSE_NRD(x)		((x & 0x7f) << 16)
+#define AT91_SMC_PULSE_NCS_RD(x)	((x & 0x7f) << 24)
+
+#define AT91_SMC_CYCLE_NWE(x)		(x & 0x1ff)
+#define AT91_SMC_CYCLE_NRD(x)		((x & 0x1ff) << 16)
+
+#define AT91_SMC_TIMINGS_TCLR(x)	(x & 0xf)
+#define AT91_SMC_TIMINGS_TADL(x)	((x & 0xf) << 4)
+#define AT91_SMC_TIMINGS_TAR(x)		((x & 0xf) << 8)
+#define AT91_SMC_TIMINGS_OCMS(x)	((x & 0x1) << 12)
+#define AT91_SMC_TIMINGS_TRR(x)		((x & 0xf) << 16)
+#define AT91_SMC_TIMINGS_TWB(x)		((x & 0xf) << 24)
+#define AT91_SMC_TIMINGS_RBNSEL(x)	((x & 0xf) << 28)
+#define AT91_SMC_TIMINGS_NFSEL(x)	((x & 0x1) << 31)
+
+#define AT91_SMC_MODE_RM_NCS		0x00000000
+#define AT91_SMC_MODE_RM_NRD		0x00000001
+#define AT91_SMC_MODE_WM_NCS		0x00000000
+#define AT91_SMC_MODE_WM_NWE		0x00000002
+
+#define AT91_SMC_MODE_EXNW_DISABLE	0x00000000
+#define AT91_SMC_MODE_EXNW_FROZEN	0x00000020
+#define AT91_SMC_MODE_EXNW_READY	0x00000030
+
+#define AT91_SMC_MODE_BAT		0x00000100
+#define AT91_SMC_MODE_DBW_8		0x00000000
+#define AT91_SMC_MODE_DBW_16		0x00001000
+#define AT91_SMC_MODE_DBW_32		0x00002000
+#define AT91_SMC_MODE_TDF_CYCLE(x)	((x & 0xf) << 16)
+#define AT91_SMC_MODE_TDF		0x00100000
+#define AT91_SMC_MODE_PMEN		0x01000000
+#define AT91_SMC_MODE_PS_4		0x00000000
+#define AT91_SMC_MODE_PS_8		0x10000000
+#define AT91_SMC_MODE_PS_16		0x20000000
+#define AT91_SMC_MODE_PS_32		0x30000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d3.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d3.h
new file mode 100644
index 000000000..f4f05676f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d3.h
@@ -0,0 +1,208 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Chip-specific header file for the SAMA5D3 family
+ *
+ * (C) 2012 - 2013 Atmel Corporation.
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * Definitions for the SoC:
+ * SAMA5D3
+ */
+
+#ifndef SAMA5D3_H
+#define SAMA5D3_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Controller Interrupt */
+#define ATMEL_ID_DBGU	2	/* Debug Unit Interrupt */
+#define ATMEL_ID_PIT	3	/* Periodic Interval Timer Interrupt */
+#define ATMEL_ID_WDT	4	/* Watchdog timer Interrupt */
+#define ATMEL_ID_SMC	5	/* Multi-bit ECC Interrupt */
+#define ATMEL_ID_PIOA	6	/* Parallel I/O Controller A */
+#define ATMEL_ID_PIOB	7	/* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC	8	/* Parallel I/O Controller C */
+#define ATMEL_ID_PIOD	9	/* Parallel I/O Controller D */
+#define ATMEL_ID_PIOE	10	/* Parallel I/O Controller E */
+#define ATMEL_ID_SMD	11	/* SMD Soft Modem */
+#define ATMEL_ID_USART0	12	/* USART 0 */
+#define ATMEL_ID_USART1	13	/* USART 1 */
+#define ATMEL_ID_USART2	14	/* USART 2 */
+#define ATMEL_ID_USART3	15	/* USART 3 */
+#define ATMEL_ID_UART0	16
+#define ATMEL_ID_UART1	17
+#define ATMEL_ID_TWI0	18	/* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1	19	/* Two-Wire Interface 1 */
+#define ATMEL_ID_TWI2	20	/* Two-Wire Interface 2 */
+#define ATMEL_ID_MCI0	21	/* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_MCI1	22	/*  */
+#define ATMEL_ID_MCI2	23	/*  */
+#define ATMEL_ID_SPI0	24	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	25	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_TC0	26	/* */
+#define ATMEL_ID_TC1	27	/* */
+#define ATMEL_ID_PWMC	28	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC	29	/* Touch Screen ADC Controller */
+#define ATMEL_ID_DMA0	30	/* DMA Controller */
+#define ATMEL_ID_DMA1	31	/* DMA Controller */
+#define ATMEL_ID_UHPHS	32	/* USB Host High Speed */
+#define ATMEL_ID_UDPHS	33	/* USB Device High Speed */
+#define ATMEL_ID_GMAC	34
+#define ATMEL_ID_EMAC	35	/* Ethernet MAC */
+#define ATMEL_ID_LCDC	36	/* LCD Controller */
+#define ATMEL_ID_ISI	37	/* Image Sensor Interface */
+#define ATMEL_ID_SSC0	38	/* Synchronous Serial Controller 0 */
+#define ATMEL_ID_SSC1	39	/* Synchronous Serial Controller 1 */
+#define ATMEL_ID_CAN0	40
+#define ATMEL_ID_CAN1	41
+#define ATMEL_ID_SHA	42
+#define ATMEL_ID_AES	43
+#define ATMEL_ID_TDES	44
+#define ATMEL_ID_TRNG	45
+#define ATMEL_ID_ARM	46
+#define ATMEL_ID_IRQ0	47	/* Advanced Interrupt Controller */
+#define ATMEL_ID_FUSE	48
+#define ATMEL_ID_MPDDRC	49
+
+/* sama5d3 series chip id definitions */
+#define ARCH_ID_SAMA5D3		0x8a5c07c0
+#define ARCH_EXID_SAMA5D31	0x00444300
+#define ARCH_EXID_SAMA5D33	0x00414300
+#define ARCH_EXID_SAMA5D34	0x00414301
+#define ARCH_EXID_SAMA5D35	0x00584300
+#define ARCH_EXID_SAMA5D36	0x00004301
+
+#define cpu_is_sama5d3()	(get_chip_id() == ARCH_ID_SAMA5D3)
+#define cpu_is_sama5d31()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D31))
+#define cpu_is_sama5d33()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D33))
+#define cpu_is_sama5d34()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D34))
+#define cpu_is_sama5d35()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D35))
+#define cpu_is_sama5d36()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D36))
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_MCI0		0xf0000000
+#define ATMEL_BASE_SPI0		0xf0004000
+#define ATMEL_BASE_SSC0		0xf000C000
+#define ATMEL_BASE_TC2		0xf0010000
+#define ATMEL_BASE_TWI0		0xf0014000
+#define ATMEL_BASE_TWI1		0xf0018000
+#define ATMEL_BASE_USART0	0xf001c000
+#define ATMEL_BASE_USART1	0xf0020000
+#define ATMEL_BASE_UART0	0xf0024000
+#define ATMEL_BASE_GMAC		0xf0028000
+#define ATMEL_BASE_PWMC		0xf002c000
+#define ATMEL_BASE_LCDC		0xf0030000
+#define ATMEL_BASE_ISI		0xf0034000
+#define ATMEL_BASE_SFR		0xf0038000
+/* Reserved: 0xf003c000 - 0xf8000000 */
+#define ATMEL_BASE_MCI1		0xf8000000
+#define ATMEL_BASE_MCI2		0xf8004000
+#define ATMEL_BASE_SPI1		0xf8008000
+#define ATMEL_BASE_SSC1		0xf800c000
+#define ATMEL_BASE_CAN1		0xf8010000
+#define ATMEL_BASE_TC3		0xf8014000
+#define ATMEL_BASE_TSADC	0xf8018000
+#define ATMEL_BASE_TWI2		0xf801c000
+#define ATMEL_BASE_USART2	0xf8020000
+#define ATMEL_BASE_USART3	0xf8024000
+#define ATMEL_BASE_UART1	0xf8028000
+#define ATMEL_BASE_EMAC		0xf802c000
+#define ATMEL_BASE_UDPHS	0xf8030000
+#define ATMEL_BASE_SHA		0xf8034000
+#define ATMEL_BASE_AES		0xf8038000
+#define ATMEL_BASE_TDES		0xf803c000
+#define ATMEL_BASE_TRNG		0xf8040000
+/* Reserved:	0xf804400 - 0xffffc00 */
+
+/*
+ * System Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_SYS		0xffffc000
+#define ATMEL_BASE_SMC		0xffffc000
+#define ATMEL_BASE_PMECC	(ATMEL_BASE_SMC + 0x070)
+#define ATMEL_BASE_PMERRLOC	(ATMEL_BASE_SMC + 0x500)
+#define ATMEL_BASE_FUSE		0xffffe400
+#define ATMEL_BASE_DMAC0	0xffffe600
+#define ATMEL_BASE_DMAC1	0xffffe800
+#define ATMEL_BASE_MPDDRC	0xffffea00
+#define ATMEL_BASE_MATRIX	0xffffec00
+#define ATMEL_BASE_DBGU		0xffffee00
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_PIOA		0xfffff200
+#define ATMEL_BASE_PIOB		0xfffff400
+#define ATMEL_BASE_PIOC		0xfffff600
+#define ATMEL_BASE_PIOD		0xfffff800
+#define ATMEL_BASE_PIOE		0xfffffa00
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffe00
+#define ATMEL_BASE_SHDWN	0xfffffe10
+#define ATMEL_BASE_PIT		0xfffffe30
+#define ATMEL_BASE_WDT		0xfffffe40
+#define ATMEL_BASE_SCKCR	0xfffffe50
+#define ATMEL_BASE_GPBR		0xfffffe60
+#define ATMEL_BASE_RTC		0xfffffeb0
+/* Reserved:	0xfffffee0 - 0xffffffff */
+
+#define ATMEL_CHIPID_CIDR	0xffffee40
+#define ATMEL_CHIPID_EXID	0xffffee44
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM		0x00100000	/* Internal ROM base address */
+#define ATMEL_BASE_SRAM		0x00200000	/* Internal ROM base address */
+#define ATMEL_BASE_SRAM0	0x00300000	/* Internal SRAM base address */
+#define ATMEL_BASE_SRAM1	0x00310000	/* Internal SRAM base address */
+#define ATMEL_BASE_SMD		0x00400000	/* Internal ROM base address */
+#define ATMEL_BASE_UDPHS_FIFO	0x00500000	/* USB Device HS controller */
+#define ATMEL_BASE_OHCI		0x00600000	/* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00700000	/* USB Host controller (EHCI) */
+#define ATMEL_BASE_AXI		0x00800000	/* Video Decoder Controller */
+#define ATMEL_BASE_DAP		0x00900000	/* Video Decoder Controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000
+#define ATMEL_BASE_DDRCS	0x20000000
+#define ATMEL_BASE_CS1		0x40000000
+#define ATMEL_BASE_CS2		0x50000000
+#define ATMEL_BASE_CS3		0x60000000
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS		5
+#define CPU_HAS_PCR
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfffffe3c
+
+/*
+ * PMECC table in ROM
+ */
+#define ATMEL_PMECC_INDEX_OFFSET_512	0x8000
+#define ATMEL_PMECC_INDEX_OFFSET_1024	0x10000
+
+/*
+ * SAMA5D3 specific prototypes
+ */
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_emac(void);
+unsigned int has_gmac(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d3_smc.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d3_smc.h
new file mode 100644
index 000000000..547e7b72f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d3_smc.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Atmel Corporation.
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on SAMA5D3 datasheet.
+ */
+
+#ifndef SAMA5D3_SMC_H
+#define SAMA5D3_SMC_H
+
+#ifdef __ASSEMBLY__
+#define AT91_ASM_SMC_SETUP0	(ATMEL_BASE_SMC + 0x600)
+#define AT91_ASM_SMC_PULSE0	(ATMEL_BASE_SMC + 0x604)
+#define AT91_ASM_SMC_CYCLE0	(ATMEL_BASE_SMC + 0x608)
+#define AT91_ASM_SMC_TIMINGS0	(ATMEL_BASE_SMC + 0x60c)
+#define AT91_ASM_SMC_MODE0	(ATMEL_BASE_SMC + 0x610)
+#else
+struct at91_cs {
+	u32	setup;		/* 0x600 SMC Setup Register */
+	u32	pulse;		/* 0x604 SMC Pulse Register */
+	u32	cycle;		/* 0x608 SMC Cycle Register */
+	u32	timings;	/* 0x60C SMC Cycle Register */
+	u32	mode;		/* 0x610 SMC Mode Register */
+};
+
+struct at91_smc {
+	u32 reserved[384];
+	struct at91_cs cs[4];
+};
+#endif /*  __ASSEMBLY__ */
+
+#define AT91_SMC_SETUP_NWE(x)		(x & 0x3f)
+#define AT91_SMC_SETUP_NCS_WR(x)	((x & 0x3f) << 8)
+#define AT91_SMC_SETUP_NRD(x)		((x & 0x3f) << 16)
+#define AT91_SMC_SETUP_NCS_RD(x)	((x & 0x3f) << 24)
+
+#define AT91_SMC_PULSE_NWE(x)		(x & 0x3f)
+#define AT91_SMC_PULSE_NCS_WR(x)	((x & 0x3f) << 8)
+#define AT91_SMC_PULSE_NRD(x)		((x & 0x3f) << 16)
+#define AT91_SMC_PULSE_NCS_RD(x)	((x & 0x3f) << 24)
+
+#define AT91_SMC_CYCLE_NWE(x)		(x & 0x1ff)
+#define AT91_SMC_CYCLE_NRD(x)		((x & 0x1ff) << 16)
+
+#define AT91_SMC_TIMINGS_TCLR(x)	(x & 0xf)
+#define AT91_SMC_TIMINGS_TADL(x)	((x & 0xf) << 4)
+#define AT91_SMC_TIMINGS_TAR(x)		((x & 0xf) << 8)
+#define AT91_SMC_TIMINGS_OCMS(x)	((x & 0x1) << 12)
+#define AT91_SMC_TIMINGS_TRR(x)		((x & 0xf) << 16)
+#define AT91_SMC_TIMINGS_TWB(x)		((x & 0xf) << 24)
+#define AT91_SMC_TIMINGS_RBNSEL(x)	((x & 0xf) << 28)
+#define AT91_SMC_TIMINGS_NFSEL(x)	((x & 0x1) << 31)
+
+#define AT91_SMC_MODE_RM_NCS		0x00000000
+#define AT91_SMC_MODE_RM_NRD		0x00000001
+#define AT91_SMC_MODE_WM_NCS		0x00000000
+#define AT91_SMC_MODE_WM_NWE		0x00000002
+
+#define AT91_SMC_MODE_EXNW_DISABLE	0x00000000
+#define AT91_SMC_MODE_EXNW_FROZEN	0x00000020
+#define AT91_SMC_MODE_EXNW_READY	0x00000030
+
+#define AT91_SMC_MODE_BAT		0x00000100
+#define AT91_SMC_MODE_DBW_8		0x00000000
+#define AT91_SMC_MODE_DBW_16		0x00001000
+#define AT91_SMC_MODE_DBW_32		0x00002000
+#define AT91_SMC_MODE_TDF_CYCLE(x)	((x & 0xf) << 16)
+#define AT91_SMC_MODE_TDF		0x00100000
+#define AT91_SMC_MODE_PMEN		0x01000000
+#define AT91_SMC_MODE_PS_4		0x00000000
+#define AT91_SMC_MODE_PS_8		0x10000000
+#define AT91_SMC_MODE_PS_16		0x20000000
+#define AT91_SMC_MODE_PS_32		0x30000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d4.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d4.h
new file mode 100644
index 000000000..e2edb6a51
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sama5d4.h
@@ -0,0 +1,234 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Chip-specific header file for the SAMA5D4 SoC
+ *
+ * Copyright (C) 2014 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ */
+
+#ifndef __SAMA5D4_H
+#define __SAMA5D4_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* FIQ Interrupt */
+#define ATMEL_ID_SYS	1	/* System Controller */
+#define ATMEL_ID_ARM	2	/* Performance Monitor Unit */
+#define ATMEL_ID_PIT	3	/* Periodic Interval Timer */
+#define ATMEL_ID_WDT	4	/* Watchdog timer */
+#define ATMEL_ID_PIOD	5	/* Parallel I/O Controller D */
+#define ATMEL_ID_USART0	6	/* USART 0 */
+#define ATMEL_ID_USART1	7	/* USART 1 */
+#define ATMEL_ID_DMA0	8	/* DMA Controller 0 */
+#define ATMEL_ID_ICM	9	/* Integrity Check Monitor */
+#define ATMEL_ID_PKCC	10	/* Public Key Crypto Controller */
+#define ATMEL_ID_AES	12	/* Advanced Encryption Standard */
+#define ATMEL_ID_AESB	13	/* AES Bridge*/
+#define ATMEL_ID_TDES	14	/* Triple Data Encryption Standard */
+#define ATMEL_ID_SHA    15	/* SHA Signature */
+#define ATMEL_ID_MPDDRC	16	/* MPDDR controller */
+#define ATMEL_ID_MATRIX1	17	/* H32MX, 32-bit AHB Matrix */
+#define ATMEL_ID_MATRIX0	18	/* H64MX, 64-bit AHB Matrix */
+#define ATMEL_ID_VDEC	19	/* Video Decoder */
+#define ATMEL_ID_SBM	20	/* Secure Box Module */
+#define ATMEL_ID_SMC	22	/* Multi-bit ECC interrupt */
+#define ATMEL_ID_PIOA	23	/* Parallel I/O Controller A */
+#define ATMEL_ID_PIOB	24	/* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC	25	/* Parallel I/O Controller C */
+#define ATMEL_ID_PIOE	26	/* Parallel I/O Controller E */
+#define ATMEL_ID_UART0	27	/* UART 0 */
+#define ATMEL_ID_UART1	28	/* UART 1 */
+#define ATMEL_ID_USART2	29	/* USART 2 */
+#define ATMEL_ID_USART3	30	/* USART 3 */
+#define ATMEL_ID_USART4	31	/* USART 4 */
+#define ATMEL_ID_TWI0	32	/* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1	33	/* Two-Wire Interface 1 */
+#define ATMEL_ID_TWI2	34	/* Two-Wire Interface 2 */
+#define ATMEL_ID_MCI0	35	/* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_MCI1	36	/* High Speed Multimedia Card Interface 1 */
+#define ATMEL_ID_SPI0	37	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	38	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_SPI2	39	/* Serial Peripheral Interface 2 */
+#define ATMEL_ID_TC0	40	/* Timer Counter 0 (ch. 0, 1, 2) */
+#define ATMEL_ID_TC1	41	/* Timer Counter 1 (ch. 3, 4, 5) */
+#define ATMEL_ID_TC2	42	/* Timer Counter 2 (ch. 6, 7, 8) */
+#define ATMEL_ID_PWMC	43	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_ADC	44	/* Touch Screen ADC Controller */
+#define ATMEL_ID_DBGU	45	/* Debug Unit Interrupt */
+#define ATMEL_ID_UHPHS	46	/* USB Host High Speed */
+#define ATMEL_ID_UDPHS	47	/* USB Device High Speed */
+#define ATMEL_ID_SSC0	48	/* Synchronous Serial Controller 0 */
+#define ATMEL_ID_SSC1	49	/* Synchronous Serial Controller 1 */
+#define ATMEL_ID_XDMAC1	50	/* DMA Controller 1 */
+#define ATMEL_ID_LCDC	51	/* LCD Controller */
+#define ATMEL_ID_ISI	52	/* Image Sensor Interface */
+#define ATMEL_ID_TRNG	53	/* True Random Number Generator */
+#define ATMEL_ID_GMAC0	54	/* Ethernet MAC 0 */
+#define ATMEL_ID_GMAC1	55	/* Ethernet MAC 1 */
+#define ATMEL_ID_IRQ	56	/* IRQ Interrupt ID */
+#define ATMEL_ID_SFC	57	/* Fuse Controller */
+#define ATMEL_ID_SECURAM	59	/* Secured RAM */
+#define ATMEL_ID_SMD	61	/* SMD Soft Modem */
+#define ATMEL_ID_TWI3	62	/* Two-Wire Interface 3 */
+#define ATMEL_ID_CATB	63	/* Capacitive Touch Controller */
+#define ATMEL_ID_SFR	64	/* Special Funcion Register */
+#define ATMEL_ID_AIC	65	/* Advanced Interrupt Controller */
+#define ATMEL_ID_SAIC	66	/* Secured Advanced Interrupt Controller */
+#define ATMEL_ID_L2CC	67	/* L2 Cache Controller */
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_LCDC		0xf0000000
+#define ATMEL_BASE_DMAC1	0xf0004000
+#define ATMEL_BASE_ISI		0xf0008000
+#define ATMEL_BASE_PKCC		0xf000C000
+#define ATMEL_BASE_MPDDRC	0xf0010000
+#define ATMEL_BASE_DMAC0	0xf0014000
+#define ATMEL_BASE_PMC		0xf0018000
+#define ATMEL_BASE_MATRIX0	0xf001c000
+#define ATMEL_BASE_AESB		0xf0020000
+/* Reserved: 0xf0024000 - 0xf8000000 */
+#define ATMEL_BASE_MCI0		0xf8000000
+#define ATMEL_BASE_UART0	0xf8004000
+#define ATMEL_BASE_SSC0		0xf8008000
+#define ATMEL_BASE_PWMC		0xf800c000
+#define ATMEL_BASE_SPI0		0xf8010000
+#define ATMEL_BASE_TWI0		0xf8014000
+#define ATMEL_BASE_TWI1		0xf8018000
+#define ATMEL_BASE_TC0		0xf801c000
+#define ATMEL_BASE_GMAC0	0xf8020000
+#define ATMEL_BASE_TWI2		0xf8024000
+#define ATMEL_BASE_SFR		0xf8028000
+#define ATMEL_BASE_USART0	0xf802c000
+#define ATMEL_BASE_USART1	0xf8030000
+/* Reserved:	0xf8034000 - 0xfc000000 */
+#define ATMEL_BASE_MCI1		0xfc000000
+#define ATMEL_BASE_UART1	0xfc004000
+#define ATMEL_BASE_USART2	0xfc008000
+#define ATMEL_BASE_USART3	0xfc00c000
+#define ATMEL_BASE_USART4	0xfc010000
+#define ATMEL_BASE_SSC1		0xfc014000
+#define ATMEL_BASE_SPI1		0xfc018000
+#define ATMEL_BASE_SPI2		0xfc01c000
+#define ATMEL_BASE_TC1		0xfc020000
+#define ATMEL_BASE_TC2		0xfc024000
+#define ATMEL_BASE_GMAC1	0xfc028000
+#define ATMEL_BASE_UDPHS	0xfc02c000
+#define ATMEL_BASE_TRNG		0xfc030000
+#define ATMEL_BASE_ADC		0xfc034000
+#define ATMEL_BASE_TWI3		0xfc038000
+
+#define ATMEL_BASE_MATRIX1	0xfc054000
+
+#define ATMEL_BASE_SMC		0xfc05c000
+#define ATMEL_BASE_PMECC	(ATMEL_BASE_SMC + 0x070)
+#define ATMEL_BASE_PMERRLOC	(ATMEL_BASE_SMC + 0x500)
+
+#define ATMEL_BASE_PIOD		0xfc068000
+#define ATMEL_BASE_RSTC		0xfc068600
+#define ATMEL_BASE_PIT		0xfc068630
+#define ATMEL_BASE_WDT		0xfc068640
+
+#define ATMEL_BASE_DBGU		0xfc069000
+#define ATMEL_BASE_PIOA		0xfc06a000
+#define ATMEL_BASE_PIOB		0xfc06b000
+#define ATMEL_BASE_PIOC		0xfc06c000
+#define ATMEL_BASE_PIOE		0xfc06d000
+#define ATMEL_BASE_AIC		0xfc06e000
+
+#define ATMEL_CHIPID_CIDR	0xfc069040
+#define ATMEL_CHIPID_EXID	0xfc069044
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM		0x00000000	/* Internal ROM base address */
+#define ATMEL_BASE_NFC		0x00100000	/* NFC SRAM */
+#define ATMEL_BASE_SRAM		0x00200000	/* Internal ROM base address */
+#define ATMEL_BASE_VDEC		0x00300000	/* Video Decoder Controller */
+#define ATMEL_BASE_UDPHS_FIFO	0x00400000	/* USB Device HS controller */
+#define ATMEL_BASE_OHCI		0x00500000	/* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00600000	/* USB Host controller (EHCI) */
+#define ATMEL_BASE_AXI		0x00700000
+#define ATMEL_BASE_DAP		0x00800000
+#define ATMEL_BASE_SMD		0x00900000
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000
+#define ATMEL_BASE_DDRCS	0x20000000
+#define ATMEL_BASE_CS1		0x60000000
+#define ATMEL_BASE_CS2		0x70000000
+#define ATMEL_BASE_CS3		0x80000000
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS		5
+#define CPU_HAS_PCR
+#define CPU_HAS_H32MXDIV
+
+/* MATRIX0(H64MX) slave id definitions */
+#define H64MX_SLAVE_AXIMX_BRIDGE	0	/* Bridge from H64MX to AXIMX */
+#define H64MX_SLAVE_PERIPH_BRIDGE	1	/* H64MX Peripheral Bridge */
+#define H64MX_SLAVE_VDEC		2	/* Video Decoder */
+#define H64MX_SLAVE_DDRC_PORT0		3	/* DDR2 Port0-AESOTF */
+#define H64MX_SLAVE_DDRC_PORT1		4	/* DDR2 Port1 */
+#define H64MX_SLAVE_DDRC_PORT2		5	/* DDR2 Port2 */
+#define H64MX_SLAVE_DDRC_PORT3		6	/* DDR2 Port3 */
+#define H64MX_SLAVE_DDRC_PORT4		7	/* DDR2 Port4 */
+#define H64MX_SLAVE_DDRC_PORT5		8	/* DDR2 Port5 */
+#define H64MX_SLAVE_DDRC_PORT6		9	/* DDR2 Port6 */
+#define H64MX_SLAVE_DDRC_PORT7		10	/* DDR2 Port7 */
+#define H64MX_SLAVE_SRAM		11	/* Internal SRAM 128K */
+#define H64MX_SLAVE_H32MX_BRIDGE	12	/* Bridge from H64MX to H32MX */
+
+/* MATRIX1(H32MX) slave id definitions */
+#define H32MX_SLAVE_H64MX_BRIDGE	0	/* Bridge from H32MX to H64MX */
+#define H32MX_SLAVE_PERIPH_BRIDGE0	1	/* H32MX Peripheral Bridge 0 */
+#define H32MX_SLAVE_PERIPH_BRIDGE1	2	/* H32MX Peripheral Bridge 1 */
+#define H32MX_SLAVE_EBI			3	/* External Bus Interface */
+#define H32MX_SLAVE_NFC_CMD		3	/* NFC command Register */
+#define H32MX_SLAVE_NFC_SRAM		4	/* NFC SRAM */
+#define H32MX_SLAVE_USB			5	/* USB Device & Host */
+#define H32MX_SLAVE_SMD			6	/* Soft Modem (SMD) */
+
+/* AICREDIR Unlock Key */
+#define ATMEL_SFR_AICREDIR_KEY		0x5F67B102
+
+/* sama5d4 series chip id definitions */
+#define ARCH_ID_SAMA5D4		0x8a5c07c0
+#define ARCH_EXID_SAMA5D41	0x00000001
+#define ARCH_EXID_SAMA5D42	0x00000002
+#define ARCH_EXID_SAMA5D43	0x00000003
+#define ARCH_EXID_SAMA5D44	0x00000004
+
+#define cpu_is_sama5d4()	(get_chip_id() == ARCH_ID_SAMA5D4)
+#define cpu_is_sama5d41()	(cpu_is_sama5d4() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D41))
+#define cpu_is_sama5d42()	(cpu_is_sama5d4() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D42))
+#define cpu_is_sama5d43()	(cpu_is_sama5d4() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D43))
+#define cpu_is_sama5d44()	(cpu_is_sama5d4() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D44))
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfc06863c
+
+/*
+ * No PMECC Galois table in ROM
+ */
+#define NO_GALOIS_TABLE_IN_ROM
+
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/include/mach/sama7g5.h b/roms/u-boot/arch/arm/mach-at91/include/mach/sama7g5.h
new file mode 100644
index 000000000..ae43e8700
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/include/mach/sama7g5.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Chip-specific header file for the SAMA7G5 SoC
+ *
+ * Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
+ *		      Eugen Hristev <eugen.hristev@microchip.com>
+ */
+
+#ifndef __SAMA7G5_H__
+#define __SAMA7G5_H__
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FLEXCOM0	38
+#define ATMEL_ID_FLEXCOM1	39
+#define ATMEL_ID_FLEXCOM2	40
+#define ATMEL_ID_FLEXCOM3	41
+
+#define ATMEL_ID_SDMMC0		80
+#define ATMEL_ID_SDMMC1		81
+
+#define ATMEL_ID_PIT64B0	70
+#define ATMEL_ID_PIT64B		ATMEL_ID_PIT64B0
+
+#define ATMEL_CHIPID_CIDR	0xe0020000
+#define ATMEL_CHIPID_EXID	0xe0020004
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_PIOA		0xe0014000
+#define ATMEL_BASE_PIOB		(ATMEL_BASE_PIOA + 0x40)
+#define ATMEL_BASE_PIOC		(ATMEL_BASE_PIOB + 0x40)
+#define ATMEL_BASE_PIOD		(ATMEL_BASE_PIOC + 0x40)
+#define ATMEL_BASE_PIOE		(ATMEL_BASE_PIOD + 0x40)
+
+#define ATMEL_PIO_PORTS		5
+
+#define CPU_HAS_PCR
+
+#define ATMEL_BASE_PMC		0xe0018000
+
+#define ATMEL_BASE_WDT		0xe001c000
+#define ATMEL_BASE_RSTC		0xe001d000
+#define ATMEL_BASE_WDTS		0xe001d180
+#define ATMEL_BASE_SCKCR	0xe001d050
+
+#define ATMEL_BASE_SDMMC0	0xe1204000
+#define ATMEL_BASE_SDMMC1	0xe1208000
+
+#define ATMEL_BASE_PIT64B0	0xe1800000
+
+#define ATMEL_BASE_FLEXCOM0	0xe1818000
+#define ATMEL_BASE_FLEXCOM1	0xe181c000
+#define ATMEL_BASE_FLEXCOM2	0xe1820000
+#define ATMEL_BASE_FLEXCOM3	0xe1824000
+#define ATMEL_BASE_FLEXCOM4	0xe2018000
+
+#define ATMEL_BASE_TZC400	0xe3000000
+
+#define ATMEL_BASE_UMCTL2	0xe3800000
+#define ATMEL_BASE_UMCTL2_MP	0xe38003f8
+#define ATMEL_BASE_PUBL		0xe3804000
+
+#define ATMEL_NUM_FLEXCOM	12
+#define ATMEL_PIO_PORTS		5
+
+#define ATMEL_BASE_PIT64BC	ATMEL_BASE_PIT64B0
+
+#ifndef __ASSEMBLY__
+char *get_cpu_name(void);
+#endif
+
+#endif /* #ifndef __SAMA7G5_H__ */
diff --git a/roms/u-boot/arch/arm/mach-at91/matrix.c b/roms/u-boot/arch/arm/mach-at91/matrix.c
new file mode 100644
index 000000000..2fa8493a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/matrix.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#include <common.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/sama5_matrix.h>
+
+void matrix_init(void)
+{
+	struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0;
+	struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1;
+	int i;
+
+	/* DDR port 1 ~ port 7 */
+	for (i = H64MX_SLAVE_DDRC_PORT1; i <= H64MX_SLAVE_DDRC_PORT7; i++) {
+		writel(0x000f0f0f, &h64mx->ssr[i]);
+		writel(0x0000ffff, &h64mx->sassr[i]);
+		writel(0x0000000f, &h64mx->srtsr[i]);
+	}
+
+	/* EBI CS3 (NANDFlash 128M) and NFC Command Registers(128M) */
+	writel(0x00c0c0c0, &h32mx->ssr[H32MX_SLAVE_EBI]);
+	writel(0xff000000, &h32mx->sassr[H32MX_SLAVE_EBI]);
+	writel(0xff000000, &h32mx->srtsr[H32MX_SLAVE_EBI]);
+
+	/* NFC SRAM */
+	writel(0x00010101, &h32mx->ssr[H32MX_SLAVE_NFC_SRAM]);
+	writel(0x00000001, &h32mx->sassr[H32MX_SLAVE_NFC_SRAM]);
+	writel(0x00000001, &h32mx->srtsr[H32MX_SLAVE_NFC_SRAM]);
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/mpddrc.c b/roms/u-boot/arch/arm/mach-at91/mpddrc.c
new file mode 100644
index 000000000..5422c0545
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/mpddrc.c
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou Yang <wenyou.yang@atmel.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/atmel_mpddrc.h>
+#include <asm/arch/at91_common.h>
+#include <linux/delay.h>
+
+#define SAMA5D3_MPDDRC_VERSION		0x140
+
+static inline void atmel_mpddr_op(const struct atmel_mpddr *mpddr,
+	      int mode,
+	      u32 ram_address)
+{
+	writel(mode, &mpddr->mr);
+	dmb();
+	writel(0, ram_address);
+}
+
+static int ddr2_decodtype_is_seq(const unsigned int base, u32 cr)
+{
+	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
+	u16 version = readl(&mpddr->version) & 0xffff;
+
+	if ((version >= SAMA5D3_MPDDRC_VERSION) &&
+	    (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
+		return 0;
+
+	return 1;
+}
+
+
+int ddr2_init(const unsigned int base,
+	      const unsigned int ram_address,
+	      const struct atmel_mpddrc_config *mpddr_value)
+{
+	const struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
+
+	u32 ba_off, cr;
+
+	/* Compute bank offset according to NC in configuration register */
+	ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
+	if (ddr2_decodtype_is_seq(base, mpddr_value->cr))
+		ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
+
+	ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;
+
+	/* Program the memory device type into the memory device register */
+	writel(mpddr_value->md, &mpddr->md);
+
+	/* Program the configuration register */
+	writel(mpddr_value->cr, &mpddr->cr);
+
+	/* Program the timing register */
+	writel(mpddr_value->tpr0, &mpddr->tpr0);
+	writel(mpddr_value->tpr1, &mpddr->tpr1);
+	writel(mpddr_value->tpr2, &mpddr->tpr2);
+
+	/* Issue a NOP command */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/* A 200 us is provided to precede any signal toggle */
+	udelay(200);
+
+	/* Issue a NOP command */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/* Issue an all banks precharge command */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+
+	/* Issue an extended mode register set(EMRS2) to choose operation */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x2 << ba_off));
+
+	/* Issue an extended mode register set(EMRS3) to set EMSR to 0 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x3 << ba_off));
+
+	/*
+	 * Issue an extended mode register set(EMRS1) to enable DLL and
+	 * program D.I.C (output driver impedance control)
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x1 << ba_off));
+
+	/* Enable DLL reset */
+	cr = readl(&mpddr->cr);
+	writel(cr | ATMEL_MPDDRC_CR_DLL_RESET_ENABLED, &mpddr->cr);
+
+	/* A mode register set(MRS) cycle is issued to reset DLL */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+
+	/* Issue an all banks precharge command */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+
+	/* Two auto-refresh (CBR) cycles are provided */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+
+	/* Disable DLL reset */
+	cr = readl(&mpddr->cr);
+	writel(cr & (~ATMEL_MPDDRC_CR_DLL_RESET_ENABLED), &mpddr->cr);
+
+	/* A mode register set (MRS) cycle is issued to disable DLL reset */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+
+	/* Set OCD calibration in default state */
+	cr = readl(&mpddr->cr);
+	writel(cr | ATMEL_MPDDRC_CR_OCD_DEFAULT, &mpddr->cr);
+
+	/*
+	 * An extended mode register set (EMRS1) cycle is issued
+	 * to OCD default value
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x1 << ba_off));
+
+	 /* OCD calibration mode exit */
+	cr = readl(&mpddr->cr);
+	writel(cr & (~ATMEL_MPDDRC_CR_OCD_DEFAULT), &mpddr->cr);
+
+	/*
+	 * An extended mode register set (EMRS1) cycle is issued
+	 * to enable OCD exit
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x1 << ba_off));
+
+	/* A nornal mode command is provided */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
+
+	/* Perform a write access to any DDR2-SDRAM address */
+	writel(0, ram_address);
+
+	/* Write the refresh rate */
+	writel(mpddr_value->rtr, &mpddr->rtr);
+
+	return 0;
+}
+
+int ddr3_init(const unsigned int base,
+	      const unsigned int ram_address,
+	      const struct atmel_mpddrc_config *mpddr_value)
+{
+	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
+	u32 ba_off;
+
+	/* Compute bank offset according to NC in configuration register */
+	ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
+	if (ddr2_decodtype_is_seq(base, mpddr_value->cr))
+		ba_off += ((mpddr_value->cr &
+			   ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
+
+	ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;
+
+	/* Program the memory device type */
+	writel(mpddr_value->md, &mpddr->md);
+
+	/*
+	 * Program features of the DDR3-SDRAM device and timing parameters
+	 */
+	writel(mpddr_value->cr, &mpddr->cr);
+
+	writel(mpddr_value->tpr0, &mpddr->tpr0);
+	writel(mpddr_value->tpr1, &mpddr->tpr1);
+	writel(mpddr_value->tpr2, &mpddr->tpr2);
+
+	/* A NOP command is issued to the DDR3-SRAM */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/* A pause of at least 500us must be observed before a single toggle. */
+	udelay(500);
+
+	/* A NOP command is issued to the DDR3-SDRAM */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/*
+	 * An Extended Mode Register Set (EMRS2) cycle is issued to choose
+	 * between commercial or high temperature operations.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x2 << ba_off));
+	/*
+	 * Step 7: An Extended Mode Register Set (EMRS3) cycle is issued to set
+	 * the Extended Mode Register to 0.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x3 << ba_off));
+	/*
+	 * An Extended Mode Register Set (EMRS1) cycle is issued to disable and
+	 * to program O.D.S. (Output Driver Strength).
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x1 << ba_off));
+
+	/*
+	 * Write a one to the DLL bit (enable DLL reset) in the MPDDRC
+	 * Configuration Register.
+	 */
+
+	/* A Mode Register Set (MRS) cycle is issued to reset DLL. */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+
+	udelay(50);
+
+	/*
+	 * A Calibration command (MRS) is issued to calibrate RTT and RON
+	 * values for the Process Voltage Temperature (PVT).
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_DEEP_CMD, ram_address);
+
+	/* A Normal Mode command is provided. */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
+
+	/* Perform a write access to any DDR3-SDRAM address. */
+	writel(0, ram_address);
+
+	/*
+	 * Write the refresh rate into the COUNT field in the MPDDRC
+	 * Refresh Timer Register (MPDDRC_RTR):
+	 */
+	writel(mpddr_value->rtr, &mpddr->rtr);
+
+	return 0;
+}
+
+int lpddr2_init(const unsigned int base,
+		const unsigned int ram_address,
+		const struct atmel_mpddrc_config *mpddr_value)
+{
+	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
+	u32 reg;
+
+	writel(mpddr_value->lpddr23_lpr, &mpddr->lpddr23_lpr);
+
+	writel(mpddr_value->tim_cal, &mpddr->tim_cal);
+
+	/* 1. Program the memory device type */
+	writel(mpddr_value->md, &mpddr->md);
+
+	/*
+	 * 2. Program features of the LPDDR2-SDRAM device and timing parameters
+	 */
+	writel(mpddr_value->cr, &mpddr->cr);
+
+	writel(mpddr_value->tpr0, &mpddr->tpr0);
+	writel(mpddr_value->tpr1, &mpddr->tpr1);
+	writel(mpddr_value->tpr2, &mpddr->tpr2);
+
+	/* 3. A NOP command is issued to the LPDDR2-SDRAM */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/*
+	 * 3bis. Add memory barrier then Perform a write access to
+	 * any low-power DDR2-SDRAM address to acknowledge the command.
+	*/
+
+	dmb();
+	writel(0, ram_address);
+
+	/* 4. A pause of at least 100 ns must be observed before a single toggle */
+	udelay(1);
+
+	/* 5. A NOP command is issued to the LPDDR2-SDRAM */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/*  6. A pause of at least 200 us must be observed before a Reset Command */
+	udelay(200);
+
+	/* 7. A Reset command is issued to the low-power DDR2-SDRAM. */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(63), ram_address);
+
+	/*
+	 * 8. A pause of at least tINIT5 must be observed before issuing
+	 * any commands
+	 */
+	udelay(1);
+
+	/* 9. A Calibration command is issued to the low-power DDR2-SDRAM. */
+	reg = readl(&mpddr->cr);
+	reg &= ~ATMEL_MPDDRC_CR_ZQ_RESET;
+	reg |= ATMEL_MPDDRC_CR_ZQ_RESET;
+	writel(reg, &mpddr->cr);
+
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(10), ram_address);
+
+	/*
+	 * 9bis: The ZQ Calibration command is now issued.
+	 * Program the type of calibration in the MPDDRC_CR: set the
+	 * ZQ field to the SHORT value.
+	 */
+	reg = readl(&mpddr->cr);
+	reg &= ~ATMEL_MPDDRC_CR_ZQ_RESET;
+	reg |= ATMEL_MPDDRC_CR_ZQ_SHORT;
+	writel(reg, &mpddr->cr);
+
+	/*
+	 * 10: A Mode Register Write command with 1 to the MRS field
+	 * is issued to the low-power DDR2-SDRAM.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(1), ram_address);
+
+	/*
+	 * 11: A Mode Register Write command with 2 to the MRS field
+	 * is issued to the low-power DDR2-SDRAM.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(2), ram_address);
+
+	/*
+	 * 12: A Mode Register Write command with 3 to the MRS field
+	 * is issued to the low-power DDR2-SDRAM.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(3), ram_address);
+
+	/*
+	 * 13: A Mode Register Write command with 16 to the MRS field
+	 * is issued to the low-power DDR2-SDRAM.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(16), ram_address);
+
+	/*
+	 * 14: In the DDR Configuration Register, open the input buffers.
+	 */
+#ifdef CONFIG_ATMEL_SFR
+	configure_ddrcfg_input_buffers(true);
+#endif
+
+	/* 15. A NOP command is issued to the LPDDR2-SDRAM */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/*
+	 * 16: A Mode Register Write command with 5 to the MRS field
+	 * is issued to the low-power DDR2-SDRAM.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(5), ram_address);
+
+	/*
+	 * 17: A Mode Register Write command with 6 to the MRS field
+	 * is issued to the low-power DDR2-SDRAM.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(6), ram_address);
+
+	/*
+	 * 18: A Mode Register Write command with 8 to the MRS field
+	 * is issued to the low-power DDR2-SDRAM.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(8), ram_address);
+
+	/*
+	 * 19: A Mode Register Write command with 0 to the MRS field
+	 * is issued to the low-power DDR2-SDRAM.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
+			 ATMEL_MPDDRC_MR_MRS(0), ram_address);
+
+	/*
+	 * 20: A Normal Mode command is provided.
+	 */
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
+
+	 /* 21: In the DDR Configuration Register, close the input buffers. */
+#ifdef CONFIG_ATMEL_SFR
+	configure_ddrcfg_input_buffers(false);
+#endif
+
+	/*
+	 * 22: Write the refresh rate into the COUNT field in the MPDDRC
+	 * Refresh Timer Register.
+	 */
+	writel(mpddr_value->rtr, &mpddr->rtr);
+
+	/* 23. Configre CAL MR4 register */
+	writel(mpddr_value->cal_mr4, &mpddr->cal_mr4);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/phy.c b/roms/u-boot/arch/arm/mach-at91/phy.c
new file mode 100644
index 000000000..6101eee35
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/phy.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2012
+ * Markus Hubig <mhubig@imko.de>
+ * IMKO GmbH <www.imko.de>
+ *
+ * Copyright (C) 2013 DENX Software Engineering, hs@denx.de
+ */
+
+#include <common.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/sizes.h>
+#include <asm/arch/at91_rstc.h>
+#include <watchdog.h>
+
+void at91_phy_reset(void)
+{
+	unsigned long erstl;
+	unsigned long start = get_timer(0);
+	unsigned long const timeout = 1000; /* 1000ms */
+	at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
+
+	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
+
+	/*
+	 * Need to reset PHY -> 500ms reset
+	 * Reset PHY by pulling the NRST line for 500ms to low. To do so
+	 * disable user reset for low level on NRST pin and poll the NRST
+	 * level in reset status register.
+	 */
+	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
+		AT91_RSTC_MR_URSTEN, &rstc->mr);
+
+	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
+
+	/* Wait for end of hardware reset */
+	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
+		/* avoid shutdown by watchdog */
+		WATCHDOG_RESET();
+		mdelay(10);
+
+		/* timeout for not getting stuck in an endless loop */
+		if (get_timer(start) >= timeout) {
+			puts("*** ERROR: Timeout waiting for PHY reset!\n");
+			break;
+		}
+	};
+
+	/* Restore NRST value */
+	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/sdram.c b/roms/u-boot/arch/arm/mach-at91/sdram.c
new file mode 100644
index 000000000..6638aa82b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/sdram.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <asm/arch/gpio.h>
+
+int sdramc_initialize(unsigned int sdram_address, const struct sdramc_reg *p)
+{
+	struct sdramc_reg *reg = (struct sdramc_reg *)ATMEL_BASE_SDRAMC;
+	unsigned int i;
+
+	/* SDRAM feature must be in the configuration register */
+	writel(p->cr, &reg->cr);
+
+	/* The SDRAM memory type must be set in the Memory Device Register */
+	writel(p->mdr, &reg->mdr);
+
+	/*
+	 * The minimum pause of 200 us is provided to precede any single
+	 * toggle
+	 */
+	for (i = 0; i < 1000; i++)
+		;
+
+	/* A NOP command is issued to the SDRAM devices */
+	writel(AT91_SDRAMC_MODE_NOP, &reg->mr);
+	writel(0x00000000, sdram_address);
+
+	/* An All Banks Precharge command is issued to the SDRAM devices */
+	writel(AT91_SDRAMC_MODE_PRECHARGE, &reg->mr);
+	writel(0x00000000, sdram_address);
+
+	for (i = 0; i < 10000; i++)
+		;
+
+	/* Eight auto-refresh cycles are provided */
+	for (i = 0; i < 8; i++) {
+		writel(AT91_SDRAMC_MODE_REFRESH, &reg->mr);
+		writel(0x00000001 + i, sdram_address + 4 + 4 * i);
+	}
+
+	/*
+	 * A Mode Register set (MRS) cyscle is issued to program the
+	 * SDRAM parameters(TCSR, PASR, DS)
+	 */
+	writel(AT91_SDRAMC_MODE_LMR, &reg->mr);
+	writel(0xcafedede, sdram_address + 0x24);
+
+	/*
+	 * The application must go into Normal Mode, setting Mode
+	 * to 0 in the Mode Register and perform a write access at
+	 * any location in the SDRAM.
+	 */
+	writel(AT91_SDRAMC_MODE_NORMAL, &reg->mr);
+	writel(0x00000000, sdram_address);	/* Perform Normal mode */
+
+	/*
+	 * Write the refresh rate into the count field in the SDRAMC
+	 * Refresh Timer Rgister.
+	 */
+	writel(p->tr, &reg->tr);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/spl.c b/roms/u-boot/arch/arm/mach-at91/spl.c
new file mode 100644
index 000000000..8d537998c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/spl.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/clk.h>
+#include <spl.h>
+
+#if !defined(CONFIG_WDT_AT91)
+void at91_disable_wdt(void)
+{
+	struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
+
+	writel(AT91_WDT_MR_WDDIS, &wdt->mr);
+}
+#endif
+
+#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
+    defined(CONFIG_SAMA5D4)
+#include <asm/arch/sama5_boot.h>
+struct {
+	u32	r4;
+} bootrom_stash __section(".data");
+
+u32 spl_boot_device(void)
+{
+	u32 dev = (bootrom_stash.r4 >> ATMEL_SAMA5_BOOT_FROM_OFF) &
+		  ATMEL_SAMA5_BOOT_FROM_MASK;
+	u32 off = (bootrom_stash.r4 >> ATMEL_SAMA5_BOOT_DEV_ID_OFF) &
+		  ATMEL_SAMA5_BOOT_DEV_ID_MASK;
+
+#if defined(CONFIG_SYS_USE_MMC) || defined(CONFIG_SD_BOOT)
+	if (dev == ATMEL_SAMA5_BOOT_FROM_MCI) {
+#if defined(CONFIG_SPL_OF_CONTROL)
+		return BOOT_DEVICE_MMC1;
+#else
+		if (off == 0)
+			return BOOT_DEVICE_MMC1;
+		if (off == 1)
+			return BOOT_DEVICE_MMC2;
+		printf("ERROR: MMC controller %i not present!\n", dev);
+		hang();
+#endif
+	}
+#endif
+
+#if defined(CONFIG_SYS_USE_SERIALFLASH) || \
+	defined(CONFIG_SYS_USE_SPIFLASH) || \
+	defined(CONFIG_SPI_BOOT)
+	if (dev == ATMEL_SAMA5_BOOT_FROM_SPI)
+		return BOOT_DEVICE_SPI;
+#endif
+	if (dev == ATMEL_SAMA5_BOOT_FROM_QSPI)
+		return BOOT_DEVICE_SPI;
+
+	if (dev == ATMEL_SAMA5_BOOT_FROM_SMC)
+		return BOOT_DEVICE_NAND;
+
+	if (dev == ATMEL_SAMA5_BOOT_FROM_SAMBA)
+		return BOOT_DEVICE_USB;
+
+	printf("ERROR: SMC/TWI/QSPI boot device not supported!\n"
+	       "       Boot device %i, controller number %i\n", dev, off);
+
+	return BOOT_DEVICE_NONE;
+}
+#else
+u32 spl_boot_device(void)
+{
+#if defined(CONFIG_SYS_USE_MMC) || defined(CONFIG_SD_BOOT)
+	return BOOT_DEVICE_MMC1;
+#elif defined(CONFIG_SYS_USE_NANDFLASH) || defined(CONFIG_NAND_BOOT)
+	return BOOT_DEVICE_NAND;
+#elif defined(CONFIG_SYS_USE_SERIALFLASH) || \
+	defined(CONFIG_SYS_USE_SPIFLASH) || \
+	defined(CONFIG_SPI_BOOT)
+	return BOOT_DEVICE_SPI;
+#endif
+	return BOOT_DEVICE_NONE;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-at91/spl_at91.c b/roms/u-boot/arch/arm/mach-at91/spl_at91.c
new file mode 100644
index 000000000..d0c732539
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/spl_at91.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 DENX Software Engineering
+ *     Heiko Schocher <hs@denx.de>
+ *
+ * Based on:
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91sam9_matrix.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/clk.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void enable_ext_reset(void)
+{
+	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
+
+	writel(AT91_RSTC_KEY | AT91_RSTC_MR_URSTEN, &rstc->mr);
+}
+
+void lowlevel_clock_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	if (!(readl(&pmc->sr) & AT91_PMC_MOSCS)) {
+		/* Enable Main Oscillator */
+		writel(AT91_PMC_MOSCS | (0x40 << 8), &pmc->mor);
+
+		/* Wait until Main Oscillator is stable */
+		while (!(readl(&pmc->sr) & AT91_PMC_MOSCS))
+			;
+	}
+
+	/* After stabilization, switch to Main Oscillator */
+	if ((readl(&pmc->mckr) & AT91_PMC_CSS) == AT91_PMC_CSS_SLOW) {
+		unsigned long tmp;
+
+		tmp = readl(&pmc->mckr);
+		tmp &= ~AT91_PMC_CSS;
+		tmp |= AT91_PMC_CSS_MAIN;
+		writel(tmp, &pmc->mckr);
+		while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+			;
+
+		tmp &= ~AT91_PMC_PRES;
+		tmp |= AT91_PMC_PRES_1;
+		writel(tmp, &pmc->mckr);
+		while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+			;
+	}
+
+	return;
+}
+
+void __weak matrix_init(void)
+{
+}
+
+void __weak at91_spl_board_init(void)
+{
+}
+
+void __weak spl_board_init(void)
+{
+}
+
+void board_init_f(ulong dummy)
+{
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+	int ret;
+
+	ret = spl_early_init();
+	if (ret) {
+		debug("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+#endif
+
+	lowlevel_clock_init();
+#if !defined(CONFIG_WDT_AT91)
+	at91_disable_wdt();
+#endif
+
+	/*
+	 * At this stage the main oscillator is supposed to be enabled
+	 * PCK = MCK = MOSC
+	 */
+	at91_pllicpr_init(0x00);
+
+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
+	at91_plla_init(CONFIG_SYS_AT91_PLLA);
+
+	/* PCK = PLLA = 2 * MCK */
+	at91_mck_init(CONFIG_SYS_MCKR);
+
+	/* Switch MCK on PLLA output */
+	at91_mck_init(CONFIG_SYS_MCKR_CSS);
+
+#if defined(CONFIG_SYS_AT91_PLLB)
+	/* Configure PLLB */
+	at91_pllb_init(CONFIG_SYS_AT91_PLLB);
+#endif
+
+	/* Enable External Reset */
+	enable_ext_reset();
+
+	/* Initialize matrix */
+	matrix_init();
+
+	gd->arch.mck_rate_hz = CONFIG_SYS_MASTER_CLOCK;
+	/*
+	 * init timer long enough for using in spl.
+	 */
+	timer_init();
+
+	/* enable clocks for all PIOs */
+#if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
+	at91_periph_clk_enable(ATMEL_ID_PIOAB);
+	at91_periph_clk_enable(ATMEL_ID_PIOCD);
+#else
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
+	at91_periph_clk_enable(ATMEL_ID_PIOB);
+	at91_periph_clk_enable(ATMEL_ID_PIOC);
+#endif
+
+#if defined(CONFIG_SPL_SERIAL_SUPPORT)
+	/* init console */
+	at91_seriald_hw_init();
+	preloader_console_init();
+#endif
+
+	mem_init();
+
+	at91_spl_board_init();
+}
diff --git a/roms/u-boot/arch/arm/mach-at91/spl_atmel.c b/roms/u-boot/arch/arm/mach-at91/spl_atmel.c
new file mode 100644
index 000000000..217ed12e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-at91/spl_atmel.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/clk.h>
+#include <spl.h>
+
+static void switch_to_main_crystal_osc(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = readl(&pmc->mor);
+	tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff);
+	tmp &= ~AT91_PMC_MOR_KEY(0xff);
+	tmp |= AT91_PMC_MOR_MOSCEN;
+	tmp |= AT91_PMC_MOR_OSCOUNT(8);
+	tmp |= AT91_PMC_MOR_KEY(0x37);
+	writel(tmp, &pmc->mor);
+	while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS))
+		;
+
+#if defined(CONFIG_SAMA5D2)
+	/* Enable a measurement of the external oscillator */
+	tmp = readl(&pmc->mcfr);
+	tmp |= AT91_PMC_MCFR_CCSS_XTAL_OSC;
+	tmp |= AT91_PMC_MCFR_RCMEAS;
+	writel(tmp, &pmc->mcfr);
+
+	while (!(readl(&pmc->mcfr) & AT91_PMC_MCFR_MAINRDY))
+		;
+
+	if (!(readl(&pmc->mcfr) & AT91_PMC_MCFR_MAINF_MASK))
+		hang();
+#endif
+
+	tmp = readl(&pmc->mor);
+/*
+ * some boards have an external oscillator with driving.
+ * in this case we need to disable the internal SoC driving (bypass mode)
+ */
+#if defined(CONFIG_SPL_AT91_MCK_BYPASS)
+	tmp |= AT91_PMC_MOR_OSCBYPASS;
+#else
+	tmp &= ~AT91_PMC_MOR_OSCBYPASS;
+#endif
+	tmp &= ~AT91_PMC_MOR_KEY(0xff);
+	tmp |= AT91_PMC_MOR_KEY(0x37);
+	writel(tmp, &pmc->mor);
+
+	tmp = readl(&pmc->mor);
+	tmp |= AT91_PMC_MOR_MOSCSEL;
+	tmp &= ~AT91_PMC_MOR_KEY(0xff);
+	tmp |= AT91_PMC_MOR_KEY(0x37);
+	writel(tmp, &pmc->mor);
+
+	while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS))
+		;
+
+#if !defined(CONFIG_SAMA5D2)
+	/* Wait until MAINRDY field is set to make sure main clock is stable */
+	while (!(readl(&pmc->mcfr) & AT91_PMC_MAINRDY))
+		;
+#endif
+
+#if !defined(CONFIG_SAMA5D4) && !defined(CONFIG_SAMA5D2)
+	tmp = readl(&pmc->mor);
+	tmp &= ~AT91_PMC_MOR_MOSCRCEN;
+	tmp &= ~AT91_PMC_MOR_KEY(0xff);
+	tmp |= AT91_PMC_MOR_KEY(0x37);
+	writel(tmp, &pmc->mor);
+#endif
+}
+
+__weak void matrix_init(void)
+{
+	/* This only be used for sama5d4 soc now */
+}
+
+__weak void redirect_int_from_saic_to_aic(void)
+{
+	/* This only be used for sama5d4 soc now */
+}
+
+/* empty stub to satisfy current lowlevel_init, can be removed any time */
+void s_init(void)
+{
+}
+
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+	if (IS_ENABLED(CONFIG_OF_CONTROL)) {
+		ret = spl_early_init();
+		if (ret) {
+			debug("spl_early_init() failed: %d\n", ret);
+			hang();
+		}
+	}
+	switch_to_main_crystal_osc();
+
+#ifdef CONFIG_SAMA5D2
+	configure_2nd_sram_as_l2_cache();
+#endif
+
+#if !defined(CONFIG_WDT_AT91)
+	/* disable watchdog */
+	at91_disable_wdt();
+#endif
+
+	/* PMC configuration */
+	at91_pmc_init();
+
+	at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+
+	matrix_init();
+
+	redirect_int_from_saic_to_aic();
+
+	timer_init();
+
+	board_early_init_f();
+
+	mem_init();
+
+	ret = spl_init();
+	if (ret) {
+		debug("spl_init() failed: %d\n", ret);
+		hang();
+	}
+
+	preloader_console_init();
+
+}
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/Kconfig b/roms/u-boot/arch/arm/mach-bcm283x/Kconfig
new file mode 100644
index 000000000..b3287ce8b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/Kconfig
@@ -0,0 +1,215 @@
+config BCM2835
+	bool "Broadcom BCM2835 SoC support"
+	depends on ARCH_BCM283X
+	select CPU_ARM1176
+
+config BCM2836
+	bool "Broadcom BCM2836 SoC support"
+	depends on ARCH_BCM283X
+	select ARMV7_LPAE
+	select CPU_V7A
+
+config BCM2837
+	bool "Broadcom BCM2837 SoC support"
+	depends on ARCH_BCM283X
+
+config BCM2837_32B
+	bool "Broadcom BCM2837 SoC 32-bit support"
+	depends on ARCH_BCM283X
+	select BCM2837
+	select ARMV7_LPAE
+	select CPU_V7A
+
+config BCM2837_64B
+	bool "Broadcom BCM2837 SoC 64-bit support"
+	depends on ARCH_BCM283X
+	select BCM2837
+	select ARM64
+
+config BCM2711
+	bool "Broadcom BCM2711 SoC support"
+	depends on ARCH_BCM283X
+
+config BCM2711_32B
+	bool "Broadcom BCM2711 SoC 32-bit support"
+	depends on ARCH_BCM283X
+	select BCM2711
+	select ARMV7_LPAE
+	select CPU_V7A
+	select PHYS_64BIT
+
+config BCM2711_64B
+	bool "Broadcom BCM2711 SoC 64-bit support"
+	depends on ARCH_BCM283X
+	select BCM2711
+	select ARM64
+
+menu "Broadcom BCM283X family"
+	depends on ARCH_BCM283X
+
+choice
+	prompt "Broadcom BCM283X board select"
+	optional
+
+config TARGET_RPI
+	bool "Raspberry Pi (all BCM2835 variants)"
+	help
+	  Support for all ARM1176-/BCM2835-based Raspberry Pi variants, such as
+	  the A, A+, B, B+, Compute Module, and Zero. This option cannot
+	  support BCM2836/BCM2837-based Raspberry Pis such as the RPi 2 and
+	  RPi 3 due to different peripheral address maps.
+
+	  This option creates a build targeting the ARM1176 ISA.
+	select BCM2835
+
+config TARGET_RPI_0_W
+	bool "Raspberry Pi Zero W"
+	help
+	  Support for all ARM1176-/BCM2835-based Raspberry Pi variants, such as
+	  the RPi Zero model W.
+
+	  This option assumes the VideoCore firmware is configured to use the
+	  mini UART (rather than PL011) for the serial console. This is the
+	  default on the RPi Zero W. To enable the UART console, the following
+	  non-default option must be present in config.txt: enable_uart=1.
+	  This is required for U-Boot to operate correctly, even if you only
+	  care about the HDMI/usbkbd console.
+
+	  This option creates a build targeting the ARMv7/AArch32 ISA.
+	select BCM2835
+
+config TARGET_RPI_2
+	bool "Raspberry Pi 2"
+	help
+	  Support for all BCM2836-based Raspberry Pi variants, such as
+	  the RPi 2 model B.
+
+	  This option also supports BCM2837-based variants such as the RPi 3
+	  Model B, when run in 32-bit mode, provided you have configured the
+	  VideoCore firmware to select the PL011 UART for the console by:
+	  a) config.txt should contain dtoverlay=pi3-miniuart-bt.
+	  b) You should run the following to tell the VC FW to process DT when
+	  booting, and copy u-boot.bin.img (rather than u-boot.bin) to the SD
+	  card as the kernel image:
+
+	       path/to/kernel/scripts/mkknlimg --dtok u-boot.bin u-boot.bin.img
+
+	  This works as of firmware.git commit 046effa13ebc "firmware:
+	  arm_loader: emmc clock depends on core clock See:
+	  https://github.com/raspberrypi/firmware/issues/572".
+
+	  This option creates a build targeting the ARMv7/AArch32 ISA.
+	select BCM2836
+
+config TARGET_RPI_3_32B
+	bool "Raspberry Pi 3 32-bit build"
+	help
+	  Support for all BCM2837-based Raspberry Pi variants, such as
+	  the RPi 3 model B, in AArch32 (32-bit) mode.
+
+	  This option assumes the VideoCore firmware is configured to use the
+	  mini UART (rather than PL011) for the serial console. This is the
+	  default on the RPi 3. To enable the UART console, the following non-
+	  default option must be present in config.txt: enable_uart=1. This is
+	  required for U-Boot to operate correctly, even if you only care
+	  about the HDMI/usbkbd console.
+
+	  This option creates a build targeting the ARMv7/AArch32 ISA.
+	select BCM2837_32B
+
+config TARGET_RPI_3
+	bool "Raspberry Pi 3 64-bit build"
+	help
+	  Support for all BCM2837-based Raspberry Pi variants, such as
+	  the RPi 3 model B, in AArch64 (64-bit) mode.
+
+	  This option assumes the VideoCore firmware is configured to use the
+	  mini UART (rather than PL011) for the serial console. This is the
+	  default on the RPi 3. To enable the UART console, the following non-
+	  default option must be present in config.txt: enable_uart=1. This is
+	  required for U-Boot to operate correctly, even if you only care
+	  about the HDMI/usbkbd console.
+
+	  At the time of writing, the VC FW requires a non-default option in
+	  config.txt to request the ARM CPU boot in 64-bit mode:
+	  arm_control=0x200
+
+	  The VC FW typically provides ARM "stub" code to set up the CPU and
+	  quiesce secondary SMP CPUs. This is not currently true in 64-bit
+	  mode. In order to boot U-Boot before the VC FW is enhanced, please
+	  see the commit description for the commit which added RPi3 support
+	  for a workaround. Since the instructions are temporary, they are not
+	  duplicated here. The VC FW enhancement is tracked in
+	  https://github.com/raspberrypi/firmware/issues/579.
+
+	  This option creates a build targeting the ARMv8/AArch64 ISA.
+	select BCM2837_64B
+
+config TARGET_RPI_4_32B
+	bool "Raspberry Pi 4 32-bit build"
+	help
+	  Support for all BCM2711-based Raspberry Pi variants, such as
+	  the RPi 4 model B, in AArch32 (32-bit) mode.
+
+	  This option assumes the VideoCore firmware is configured to use the
+	  mini UART (rather than PL011) for the serial console. This is the
+	  default on the RPi 4. To enable the UART console, the following non-
+	  default option must be present in config.txt: enable_uart=1. This is
+	  required for U-Boot to operate correctly, even if you only care
+	  about the HDMI/usbkbd console.
+
+	  Due to hardware incompatibilities, this can't be used with
+	  BCM283/5/6/7.
+
+	  This option creates a build targeting the ARMv7/AArch32 ISA.
+	select BCM2711_32B
+
+config TARGET_RPI_4
+	bool "Raspberry Pi 4 64-bit build"
+	help
+	  Support for all BCM2711-based Raspberry Pi variants, such as
+	  the RPi 4 model B, in AArch64 (64-bit) mode.
+
+	  This option assumes the VideoCore firmware is configured to use the
+	  mini UART (rather than PL011) for the serial console. This is the
+	  default on the RPi 4. To enable the UART console, the following non-
+	  default option must be present in config.txt: enable_uart=1. This is
+	  required for U-Boot to operate correctly, even if you only care
+	  about the HDMI/usbkbd console.
+
+	  Due to hardware incompatibilities, this can't be used with
+	  BCM283/5/6/7.
+
+	  Also, due to a bug in firmware, switching to 64bit mode doesn't
+	  happen automatically based on the kernel's image filename. See
+	  https://github.com/raspberrypi/firmware/issues/1193 for more details.
+	  Until that is resolved, the configuration (config.txt) needs to
+	  explicitly set: arm_64bit=1.
+
+	  This option creates a build targeting the ARMv8/AArch64 ISA.
+	select BCM2711_64B
+
+config TARGET_RPI_ARM64
+	bool "Raspberry Pi one binary 64-bit build"
+	help
+	  Support for all armv8 based Raspberry Pi variants, such as
+	  the RPi 4 model B, in AArch64 (64-bit) mode.
+	select ARM64
+
+endchoice
+
+config SYS_BOARD
+	default "rpi"
+
+config SYS_VENDOR
+	default "raspberrypi"
+
+config SYS_SOC
+	default "bcm283x"
+
+config SYS_CONFIG_NAME
+	default "rpi"
+
+source "board/raspberrypi/rpi/Kconfig"
+
+endmenu
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/Makefile b/roms/u-boot/arch/arm/mach-bcm283x/Makefile
new file mode 100644
index 000000000..7cd068832
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# (C) Copyright 2012 Stephen Warren
+
+obj-$(CONFIG_BCM2835) += lowlevel_init.o
+obj-y	+= init.o reset.o mbox.o msg.o phys2bus.o
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/include/mach/base.h b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/base.h
new file mode 100644
index 000000000..4ccaf6969
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/base.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2019 Matthias Brugger
+ */
+
+#ifndef _BCM283x_BASE_H_
+#define _BCM283x_BASE_H_
+
+extern unsigned long rpi_bcm283x_base;
+
+#ifdef CONFIG_ARMV7_LPAE
+#ifdef CONFIG_TARGET_RPI_4_32B
+#include <addr_map.h>
+#define phys_to_virt addrmap_phys_to_virt
+#define virt_to_phys addrmap_virt_to_phys
+#endif
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/gpio.h
new file mode 100644
index 000000000..4aeb48eeb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/gpio.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Vikram Narayananan
+ * <vikram186@gmail.com>
+ * (C) Copyright 2012,2015 Stephen Warren
+ */
+
+#ifndef _BCM2835_GPIO_H_
+#define _BCM2835_GPIO_H_
+
+#define BCM2835_GPIO_COUNT		54
+
+#define BCM2835_GPIO_FSEL_MASK		0x7
+#define BCM2835_GPIO_INPUT		0x0
+#define BCM2835_GPIO_OUTPUT		0x1
+#define BCM2835_GPIO_ALT0		0x4
+#define BCM2835_GPIO_ALT1		0x5
+#define BCM2835_GPIO_ALT2		0x6
+#define BCM2835_GPIO_ALT3		0x7
+#define BCM2835_GPIO_ALT4		0x3
+#define BCM2835_GPIO_ALT5		0x2
+
+#define BCM2835_GPIO_COMMON_BANK(gpio)	((gpio < 32) ? 0 : 1)
+#define BCM2835_GPIO_COMMON_SHIFT(gpio)	(gpio & 0x1f)
+
+#define BCM2835_GPIO_FSEL_BANK(gpio)	(gpio / 10)
+#define BCM2835_GPIO_FSEL_SHIFT(gpio)	((gpio % 10) * 3)
+
+struct bcm2835_gpio_regs {
+	u32 gpfsel[6];
+	u32 reserved1;
+	u32 gpset[2];
+	u32 reserved2;
+	u32 gpclr[2];
+	u32 reserved3;
+	u32 gplev[2];
+	u32 reserved4;
+	u32 gpeds[2];
+	u32 reserved5;
+	u32 gpren[2];
+	u32 reserved6;
+	u32 gpfen[2];
+	u32 reserved7;
+	u32 gphen[2];
+	u32 reserved8;
+	u32 gplen[2];
+	u32 reserved9;
+	u32 gparen[2];
+	u32 reserved10;
+	u32 gppud;
+	u32 gppudclk[2];
+};
+
+/**
+ * struct bcm2835_gpio_plat - GPIO platform description
+ *
+ * @base: Base address of GPIO controller
+ */
+struct bcm2835_gpio_plat {
+	unsigned long base;
+};
+
+#endif /* _BCM2835_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/include/mach/mbox.h b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/mbox.h
new file mode 100644
index 000000000..2ae2d3d97
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/mbox.h
@@ -0,0 +1,530 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ */
+
+#ifndef _BCM2835_MBOX_H
+#define _BCM2835_MBOX_H
+
+#include <linux/compiler.h>
+#include <asm/arch/base.h>
+
+/*
+ * The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU")
+ * and the ARM CPU. The ARM CPU is often thought of as the main CPU.
+ * However, the VideoCore actually controls the initial SoC boot, and hides
+ * much of the hardware behind a protocol. This protocol is transported
+ * using the SoC's mailbox hardware module.
+ *
+ * The mailbox hardware supports passing 32-bit values back and forth.
+ * Presumably by software convention of the firmware, the bottom 4 bits of the
+ * value are used to indicate a logical channel, and the upper 28 bits are the
+ * actual payload. Various channels exist using these simple raw messages. See
+ * https://github.com/raspberrypi/firmware/wiki/Mailboxes for a list. As an
+ * example, the messages on the power management channel are a bitmask of
+ * devices whose power should be enabled.
+ *
+ * The property mailbox channel passes messages that contain the (16-byte
+ * aligned) ARM physical address of a memory buffer. This buffer is passed to
+ * the VC for processing, is modified in-place by the VC, and the address then
+ * passed back to the ARM CPU as the response mailbox message to indicate
+ * request completion. The buffers have a generic and extensible format; each
+ * buffer contains a standard header, a list of "tags", and a terminating zero
+ * entry. Each tag contains an ID indicating its type, and length fields for
+ * generic parsing. With some limitations, an arbitrary set of tags may be
+ * combined together into a single message buffer. This file defines structs
+ * representing the header and many individual tag layouts and IDs.
+ */
+
+/* Raw mailbox HW */
+
+#define BCM2835_MBOX_PHYSADDR ({ BUG_ON(!rpi_bcm283x_base); \
+				 rpi_bcm283x_base + 0x0000b880; })
+
+struct bcm2835_mbox_regs {
+	u32 read;
+	u32 rsvd0[5];
+	u32 mail0_status;
+	u32 mail0_config;
+	u32 write;
+	u32 rsvd1[5];
+	u32 mail1_status;
+	u32 mail1_config;
+};
+
+#define BCM2835_MBOX_STATUS_WR_FULL	0x80000000
+#define BCM2835_MBOX_STATUS_RD_EMPTY	0x40000000
+
+/* Lower 4-bits are channel ID */
+#define BCM2835_CHAN_MASK		0xf
+#define BCM2835_MBOX_PACK(chan, data)	(((data) & (~BCM2835_CHAN_MASK)) | \
+					 (chan & BCM2835_CHAN_MASK))
+#define BCM2835_MBOX_UNPACK_CHAN(val)	((val) & BCM2835_CHAN_MASK)
+#define BCM2835_MBOX_UNPACK_DATA(val)	((val) & (~BCM2835_CHAN_MASK))
+
+/* Property mailbox buffer structures */
+
+#define BCM2835_MBOX_PROP_CHAN		8
+
+/* All message buffers must start with this header */
+struct bcm2835_mbox_hdr {
+	u32 buf_size;
+	u32 code;
+};
+
+#define BCM2835_MBOX_REQ_CODE		0
+#define BCM2835_MBOX_RESP_CODE_SUCCESS	0x80000000
+
+#define BCM2835_MBOX_INIT_HDR(_m_) { \
+		memset((_m_), 0, sizeof(*(_m_))); \
+		(_m_)->hdr.buf_size = sizeof(*(_m_)); \
+		(_m_)->hdr.code = 0; \
+		(_m_)->end_tag = 0; \
+	}
+
+/*
+ * A message buffer contains a list of tags. Each tag must also start with
+ * a standardized header.
+ */
+struct bcm2835_mbox_tag_hdr {
+	u32 tag;
+	u32 val_buf_size;
+	u32 val_len;
+};
+
+#define BCM2835_MBOX_INIT_TAG(_t_, _id_) { \
+		(_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \
+		(_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \
+		(_t_)->tag_hdr.val_len = sizeof((_t_)->body.req); \
+	}
+
+#define BCM2835_MBOX_INIT_TAG_NO_REQ(_t_, _id_) { \
+		(_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \
+		(_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \
+		(_t_)->tag_hdr.val_len = 0; \
+	}
+
+/* When responding, the VC sets this bit in val_len to indicate a response */
+#define BCM2835_MBOX_TAG_VAL_LEN_RESPONSE	0x80000000
+
+/*
+ * Below we define the ID and struct for many possible tags. This header only
+ * defines individual tag structs, not entire message structs, since in
+ * general an arbitrary set of tags may be combined into a single message.
+ * Clients of the mbox API are expected to define their own overall message
+ * structures by combining the header, a set of tags, and a terminating
+ * entry. For example,
+ *
+ * struct msg {
+ *     struct bcm2835_mbox_hdr hdr;
+ *     struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
+ *     ... perhaps other tags here ...
+ *     u32 end_tag;
+ * };
+ */
+
+#define BCM2835_MBOX_TAG_GET_BOARD_REV	0x00010002
+
+struct bcm2835_mbox_tag_get_board_rev {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+		} req;
+		struct {
+			u32 rev;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_MAC_ADDRESS	0x00010003
+
+struct bcm2835_mbox_tag_get_mac_address {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+		} req;
+		struct {
+			u8 mac[6];
+			u8 pad[2];
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_BOARD_SERIAL	0x00010004
+
+struct bcm2835_mbox_tag_get_board_serial {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct __packed {
+			u64 serial;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_ARM_MEMORY		0x00010005
+
+struct bcm2835_mbox_tag_get_arm_mem {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+		} req;
+		struct {
+			u32 mem_base;
+			u32 mem_size;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_POWER_DEVID_SDHCI		0
+#define BCM2835_MBOX_POWER_DEVID_UART0		1
+#define BCM2835_MBOX_POWER_DEVID_UART1		2
+#define BCM2835_MBOX_POWER_DEVID_USB_HCD	3
+#define BCM2835_MBOX_POWER_DEVID_I2C0		4
+#define BCM2835_MBOX_POWER_DEVID_I2C1		5
+#define BCM2835_MBOX_POWER_DEVID_I2C2		6
+#define BCM2835_MBOX_POWER_DEVID_SPI		7
+#define BCM2835_MBOX_POWER_DEVID_CCP2TX		8
+
+#define BCM2835_MBOX_POWER_STATE_RESP_ON	(1 << 0)
+/* Device doesn't exist */
+#define BCM2835_MBOX_POWER_STATE_RESP_NODEV	(1 << 1)
+
+#define BCM2835_MBOX_TAG_GET_POWER_STATE	0x00020001
+
+struct bcm2835_mbox_tag_get_power_state {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			u32 device_id;
+		} req;
+		struct {
+			u32 device_id;
+			u32 state;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_SET_POWER_STATE	0x00028001
+
+#define BCM2835_MBOX_SET_POWER_STATE_REQ_ON	(1 << 0)
+#define BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT	(1 << 1)
+
+struct bcm2835_mbox_tag_set_power_state {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			u32 device_id;
+			u32 state;
+		} req;
+		struct {
+			u32 device_id;
+			u32 state;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_CLOCK_RATE	0x00030002
+
+#define BCM2835_MBOX_CLOCK_ID_EMMC	1
+#define BCM2835_MBOX_CLOCK_ID_UART	2
+#define BCM2835_MBOX_CLOCK_ID_ARM	3
+#define BCM2835_MBOX_CLOCK_ID_CORE	4
+#define BCM2835_MBOX_CLOCK_ID_V3D	5
+#define BCM2835_MBOX_CLOCK_ID_H264	6
+#define BCM2835_MBOX_CLOCK_ID_ISP	7
+#define BCM2835_MBOX_CLOCK_ID_SDRAM	8
+#define BCM2835_MBOX_CLOCK_ID_PIXEL	9
+#define BCM2835_MBOX_CLOCK_ID_PWM	10
+#define BCM2835_MBOX_CLOCK_ID_EMMC2	12
+
+struct bcm2835_mbox_tag_get_clock_rate {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			u32 clock_id;
+		} req;
+		struct {
+			u32 clock_id;
+			u32 rate_hz;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_ALLOCATE_BUFFER	0x00040001
+
+struct bcm2835_mbox_tag_allocate_buffer {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			u32 alignment;
+		} req;
+		struct {
+			u32 fb_address;
+			u32 fb_size;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_RELEASE_BUFFER		0x00048001
+
+struct bcm2835_mbox_tag_release_buffer {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+		} req;
+		struct {
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_BLANK_SCREEN		0x00040002
+
+struct bcm2835_mbox_tag_blank_screen {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			/* bit 0 means on, other bots reserved */
+			u32 state;
+		} req;
+		struct {
+			u32 state;
+		} resp;
+	} body;
+};
+
+/* Physical means output signal */
+#define BCM2835_MBOX_TAG_GET_PHYSICAL_W_H	0x00040003
+#define BCM2835_MBOX_TAG_TEST_PHYSICAL_W_H	0x00044003
+#define BCM2835_MBOX_TAG_SET_PHYSICAL_W_H	0x00048003
+
+struct bcm2835_mbox_tag_physical_w_h {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		/* req not used for get */
+		struct {
+			u32 width;
+			u32 height;
+		} req;
+		struct {
+			u32 width;
+			u32 height;
+		} resp;
+	} body;
+};
+
+/* Virtual means display buffer */
+#define BCM2835_MBOX_TAG_GET_VIRTUAL_W_H	0x00040004
+#define BCM2835_MBOX_TAG_TEST_VIRTUAL_W_H	0x00044004
+#define BCM2835_MBOX_TAG_SET_VIRTUAL_W_H	0x00048004
+
+struct bcm2835_mbox_tag_virtual_w_h {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		/* req not used for get */
+		struct {
+			u32 width;
+			u32 height;
+		} req;
+		struct {
+			u32 width;
+			u32 height;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_DEPTH		0x00040005
+#define BCM2835_MBOX_TAG_TEST_DEPTH		0x00044005
+#define BCM2835_MBOX_TAG_SET_DEPTH		0x00048005
+
+struct bcm2835_mbox_tag_depth {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		/* req not used for get */
+		struct {
+			u32 bpp;
+		} req;
+		struct {
+			u32 bpp;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_PIXEL_ORDER	0x00040006
+#define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER	0x00044006
+#define BCM2835_MBOX_TAG_SET_PIXEL_ORDER	0x00048006
+
+#define BCM2835_MBOX_PIXEL_ORDER_BGR		0
+#define BCM2835_MBOX_PIXEL_ORDER_RGB		1
+
+struct bcm2835_mbox_tag_pixel_order {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		/* req not used for get */
+		struct {
+			u32 order;
+		} req;
+		struct {
+			u32 order;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_ALPHA_MODE		0x00040007
+#define BCM2835_MBOX_TAG_TEST_ALPHA_MODE	0x00044007
+#define BCM2835_MBOX_TAG_SET_ALPHA_MODE		0x00048007
+
+#define BCM2835_MBOX_ALPHA_MODE_0_OPAQUE	0
+#define BCM2835_MBOX_ALPHA_MODE_0_TRANSPARENT	1
+#define BCM2835_MBOX_ALPHA_MODE_IGNORED		2
+
+struct bcm2835_mbox_tag_alpha_mode {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		/* req not used for get */
+		struct {
+			u32 alpha;
+		} req;
+		struct {
+			u32 alpha;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_PITCH		0x00040008
+
+struct bcm2835_mbox_tag_pitch {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+		} req;
+		struct {
+			u32 pitch;
+		} resp;
+	} body;
+};
+
+/* Offset of display window within buffer */
+#define BCM2835_MBOX_TAG_GET_VIRTUAL_OFFSET	0x00040009
+#define BCM2835_MBOX_TAG_TEST_VIRTUAL_OFFSET	0x00044009
+#define BCM2835_MBOX_TAG_SET_VIRTUAL_OFFSET	0x00048009
+
+struct bcm2835_mbox_tag_virtual_offset {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		/* req not used for get */
+		struct {
+			u32 x;
+			u32 y;
+		} req;
+		struct {
+			u32 x;
+			u32 y;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_OVERSCAN		0x0004000a
+#define BCM2835_MBOX_TAG_TEST_OVERSCAN		0x0004400a
+#define BCM2835_MBOX_TAG_SET_OVERSCAN		0x0004800a
+
+struct bcm2835_mbox_tag_overscan {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		/* req not used for get */
+		struct {
+			u32 top;
+			u32 bottom;
+			u32 left;
+			u32 right;
+		} req;
+		struct {
+			u32 top;
+			u32 bottom;
+			u32 left;
+			u32 right;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_GET_PALETTE		0x0004000b
+
+struct bcm2835_mbox_tag_get_palette {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+		} req;
+		struct {
+			u32 data[1024];
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_TEST_PALETTE		0x0004400b
+
+struct bcm2835_mbox_tag_test_palette {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			u32 offset;
+			u32 num_entries;
+			u32 data[256];
+		} req;
+		struct {
+			u32 is_invalid;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_SET_PALETTE		0x0004800b
+
+struct bcm2835_mbox_tag_set_palette {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			u32 offset;
+			u32 num_entries;
+			u32 data[256];
+		} req;
+		struct {
+			u32 is_invalid;
+		} resp;
+	} body;
+};
+
+#define BCM2835_MBOX_TAG_NOTIFY_XHCI_RESET          0x00030058
+
+struct bcm2835_mbox_tag_pci_dev_addr {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			u32 dev_addr;
+		} req;
+		struct {
+		} resp;
+	} body;
+};
+
+/*
+ * Pass a raw u32 message to the VC, and receive a raw u32 back.
+ *
+ * Returns 0 for success, any other value for error.
+ */
+int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv);
+
+/*
+ * Pass a complete property-style buffer to the VC, and wait until it has
+ * been processed.
+ *
+ * This function expects a pointer to the mbox_hdr structure in an attempt
+ * to ensure some degree of type safety. However, some number of tags and
+ * a termination value are expected to immediately follow the header in
+ * memory, as required by the property protocol.
+ *
+ * Each struct bcm2835_mbox_hdr passed must be allocated with
+ * ALLOC_CACHE_ALIGN_BUFFER(x, y, z) to ensure proper cache flush/invalidate.
+ *
+ * Returns 0 for success, any other value for error.
+ */
+int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/include/mach/msg.h b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/msg.h
new file mode 100644
index 000000000..e45c1bf01
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/msg.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ */
+
+#ifndef _BCM2835_MSG_H
+#define _BCM2835_MSG_H
+
+/**
+ * bcm2835_power_on_module() - power on an SoC module
+ *
+ * @module: ID of module to power on (BCM2835_MBOX_POWER_DEVID_...)
+ * @return 0 if OK, -EIO on error
+ */
+int bcm2835_power_on_module(u32 module);
+
+/**
+ * bcm2835_get_mmc_clock() - get the frequency of the MMC clock
+ *
+ * @clock_id: ID of clock to get frequency for
+ * @return clock frequency, or -ve on error
+ */
+int bcm2835_get_mmc_clock(u32 clock_id);
+
+/**
+ * bcm2835_get_video_size() - get the current display size
+ *
+ * @widthp: Returns the width in pixels
+ * @heightp: Returns the height in pixels
+ * @return 0 if OK, -ve on error
+ */
+int bcm2835_get_video_size(int *widthp, int *heightp);
+
+/**
+ * bcm2835_set_video_params() - set the video parameters
+ *
+ * @widthp: Video width to request (returns the actual width selected)
+ * @heightp: Video height to request (returns the actual height selected)
+ * @depth_bpp: Requested bit depth
+ * @pixel_order: Pixel order to use (BCM2835_MBOX_PIXEL_ORDER_...)
+ * @alpha_mode: Alpha transparency mode to use (BCM2835_MBOX_ALPHA_MODE_...)
+ * @fb_basep: Returns base address of frame buffer
+ * @fb_sizep: Returns size of frame buffer
+ * @pitchp: Returns number of bytes in each frame buffer line
+ * @return 0 if OK, -ve on error
+ */
+int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp,
+			     int pixel_order, int alpha_mode, ulong *fb_basep,
+			     ulong *fb_sizep, int *pitchp);
+
+/**
+ * bcm2711_load_vl805_firmware() - get vl805's firmware loaded
+ *
+ * @return 0 if OK, -EIO on error
+ */
+int bcm2711_notify_vl805_reset(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/include/mach/sdhci.h b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/sdhci.h
new file mode 100644
index 000000000..732369068
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/sdhci.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ */
+
+#ifndef _BCM2835_SDHCI_H_
+#define _BCM2835_SDHCI_H_
+
+#include <asm/arch/base.h>
+
+#define BCM2835_SDHCI_PHYSADDR ({ BUG_ON(!rpi_bcm283x_base); \
+				  rpi_bcm283x_base + 0x00300000; })
+
+int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/include/mach/timer.h b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/timer.h
new file mode 100644
index 000000000..5567dbd7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/timer.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ */
+
+#ifndef _BCM2835_TIMER_H
+#define _BCM2835_TIMER_H
+
+#ifndef __ASSEMBLY__
+#include <asm/arch/base.h>
+#include <linux/bug.h>
+#endif
+
+#define BCM2835_TIMER_PHYSADDR ({ BUG_ON(!rpi_bcm283x_base); \
+				  rpi_bcm283x_base + 0x00003000; })
+
+#define BCM2835_TIMER_CS_M3	(1 << 3)
+#define BCM2835_TIMER_CS_M2	(1 << 2)
+#define BCM2835_TIMER_CS_M1	(1 << 1)
+#define BCM2835_TIMER_CS_M0	(1 << 0)
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+struct bcm2835_timer_regs {
+	u32 cs;
+	u32 clo;
+	u32 chi;
+	u32 c0;
+	u32 c1;
+	u32 c2;
+	u32 c3;
+};
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/include/mach/wdog.h b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/wdog.h
new file mode 100644
index 000000000..994266672
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/include/mach/wdog.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ */
+
+#ifndef _BCM2835_WDOG_H
+#define _BCM2835_WDOG_H
+
+#include <asm/arch/base.h>
+
+#define BCM2835_WDOG_PHYSADDR ({ BUG_ON(!rpi_bcm283x_base); \
+				 rpi_bcm283x_base + 0x00100000; })
+
+struct bcm2835_wdog_regs {
+	u32 unknown0[7];
+	u32 rstc;
+	u32 rsts;
+	u32 wdog;
+};
+
+#define BCM2835_WDOG_PASSWORD			0x5a000000
+
+#define BCM2835_WDOG_RSTC_WRCFG_MASK		0x00000030
+#define BCM2835_WDOG_RSTC_WRCFG_FULL_RESET	0x00000020
+
+#define BCM2835_WDOG_WDOG_TIMEOUT_MASK		0x0000ffff
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/init.c b/roms/u-boot/arch/arm/mach-bcm283x/init.c
new file mode 100644
index 000000000..49027ce0a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/init.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <dm/device.h>
+#include <fdt_support.h>
+#include <asm/global_data.h>
+
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS	0x600000000UL
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE	0x800000UL
+
+#ifdef CONFIG_ARM64
+#include <asm/armv8/mmu.h>
+
+#define MEM_MAP_MAX_ENTRIES (4)
+
+static struct mm_region bcm283x_mem_map[MEM_MAP_MAX_ENTRIES] = {
+	{
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x3f000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x3f000000UL,
+		.phys = 0x3f000000UL,
+		.size = 0x01000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+static struct mm_region bcm2711_mem_map[MEM_MAP_MAX_ENTRIES] = {
+	{
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0xfc000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xfc000000UL,
+		.phys = 0xfc000000UL,
+		.size = 0x03800000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS,
+		.phys = BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS,
+		.size = BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = bcm283x_mem_map;
+
+/*
+ * I/O address space varies on different chip versions.
+ * We set the base address by inspecting the DTB.
+ */
+static const struct udevice_id board_ids[] = {
+	{ .compatible = "brcm,bcm2837", .data = (ulong)&bcm283x_mem_map},
+	{ .compatible = "brcm,bcm2838", .data = (ulong)&bcm2711_mem_map},
+	{ .compatible = "brcm,bcm2711", .data = (ulong)&bcm2711_mem_map},
+	{ },
+};
+
+static void _rpi_update_mem_map(struct mm_region *pd)
+{
+	int i;
+
+	for (i = 0; i < MEM_MAP_MAX_ENTRIES; i++) {
+		mem_map[i].virt = pd[i].virt;
+		mem_map[i].phys = pd[i].phys;
+		mem_map[i].size = pd[i].size;
+		mem_map[i].attrs = pd[i].attrs;
+	}
+}
+
+static void rpi_update_mem_map(void)
+{
+	int ret;
+	struct mm_region *mm;
+	const struct udevice_id *of_match = board_ids;
+
+	while (of_match->compatible) {
+		ret = fdt_node_check_compatible(gd->fdt_blob, 0,
+						of_match->compatible);
+		if (!ret) {
+			mm = (struct mm_region *)of_match->data;
+			_rpi_update_mem_map(mm);
+			break;
+		}
+
+		of_match++;
+	}
+}
+#else
+static void rpi_update_mem_map(void) {}
+#endif
+
+unsigned long rpi_bcm283x_base = 0x3f000000;
+
+int arch_cpu_init(void)
+{
+	icache_enable();
+
+	return 0;
+}
+
+int mach_cpu_init(void)
+{
+	int ret, soc_offset;
+	u64 io_base, size;
+
+	rpi_update_mem_map();
+
+	/* Get IO base from device tree */
+	soc_offset = fdt_path_offset(gd->fdt_blob, "/soc");
+	if (soc_offset < 0)
+		return soc_offset;
+
+	ret = fdt_read_range((void *)gd->fdt_blob, soc_offset, 0, NULL,
+				&io_base, &size);
+	if (ret)
+		return ret;
+
+	rpi_bcm283x_base = io_base;
+
+	return 0;
+}
+
+#ifdef CONFIG_ARMV7_LPAE
+#ifdef CONFIG_TARGET_RPI_4_32B
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT	0xff800000UL
+#include <addr_map.h>
+#include <asm/system.h>
+
+void init_addr_map(void)
+{
+	mmu_set_region_dcache_behaviour_phys(BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT,
+					     BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS,
+					     BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE,
+					     DCACHE_OFF);
+
+	/* identity mapping for 0..BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT */
+	addrmap_set_entry(0, 0, BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT, 0);
+	/* XHCI MMIO on PCIe at BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT */
+	addrmap_set_entry(BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT,
+			  BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS,
+			  BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE, 1);
+}
+#endif
+
+void enable_caches(void)
+{
+	dcache_enable();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/lowlevel_init.S b/roms/u-boot/arch/arm/mach-bcm283x/lowlevel_init.S
new file mode 100644
index 000000000..d29ff137e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/lowlevel_init.S
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ */
+
+.globl lowlevel_init
+lowlevel_init:
+	mov	pc, lr
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/mbox.c b/roms/u-boot/arch/arm/mach-bcm283x/mbox.c
new file mode 100644
index 000000000..da9faafe1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/mbox.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 Stephen Warren
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/arch/base.h>
+#include <asm/arch/mbox.h>
+#include <phys2bus.h>
+
+#define TIMEOUT 1000 /* ms */
+
+int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv)
+{
+	struct bcm2835_mbox_regs *regs =
+		(struct bcm2835_mbox_regs *)BCM2835_MBOX_PHYSADDR;
+	ulong endtime = get_timer(0) + TIMEOUT;
+	u32 val;
+
+	debug("time: %lu timeout: %lu\n", get_timer(0), endtime);
+
+	if (send & BCM2835_CHAN_MASK) {
+		printf("mbox: Illegal mbox data 0x%08x\n", send);
+		return -1;
+	}
+
+	/* Drain any stale responses */
+
+	for (;;) {
+		val = readl(&regs->mail0_status);
+		if (val & BCM2835_MBOX_STATUS_RD_EMPTY)
+			break;
+		if (get_timer(0) >= endtime) {
+			printf("mbox: Timeout draining stale responses\n");
+			return -1;
+		}
+		val = readl(&regs->read);
+	}
+
+	/* Wait for space to send */
+
+	for (;;) {
+		val = readl(&regs->mail1_status);
+		if (!(val & BCM2835_MBOX_STATUS_WR_FULL))
+			break;
+		if (get_timer(0) >= endtime) {
+			printf("mbox: Timeout waiting for send space\n");
+			return -1;
+		}
+	}
+
+	/* Send the request */
+
+	val = BCM2835_MBOX_PACK(chan, send);
+	debug("mbox: TX raw: 0x%08x\n", val);
+	writel(val, &regs->write);
+
+	/* Wait for the response */
+
+	for (;;) {
+		val = readl(&regs->mail0_status);
+		if (!(val & BCM2835_MBOX_STATUS_RD_EMPTY))
+			break;
+		if (get_timer(0) >= endtime) {
+			printf("mbox: Timeout waiting for response\n");
+			return -1;
+		}
+	}
+
+	/* Read the response */
+
+	val = readl(&regs->read);
+	debug("mbox: RX raw: 0x%08x\n", val);
+
+	/* Validate the response */
+
+	if (BCM2835_MBOX_UNPACK_CHAN(val) != chan) {
+		printf("mbox: Response channel mismatch\n");
+		return -1;
+	}
+
+	*recv = BCM2835_MBOX_UNPACK_DATA(val);
+
+	return 0;
+}
+
+#ifdef DEBUG
+void dump_buf(struct bcm2835_mbox_hdr *buffer)
+{
+	u32 *p;
+	u32 words;
+	int i;
+
+	p = (u32 *)buffer;
+	words = buffer->buf_size / 4;
+	for (i = 0; i < words; i++)
+		printf("    0x%04x: 0x%08x\n", i * 4, p[i]);
+}
+#endif
+
+int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer)
+{
+	int ret;
+	u32 rbuffer;
+	struct bcm2835_mbox_tag_hdr *tag;
+	int tag_index;
+
+#ifdef DEBUG
+	printf("mbox: TX buffer\n");
+	dump_buf(buffer);
+#endif
+
+	flush_dcache_range((unsigned long)buffer,
+			   (unsigned long)((void *)buffer +
+			   roundup(buffer->buf_size, ARCH_DMA_MINALIGN)));
+
+	ret = bcm2835_mbox_call_raw(chan,
+				    phys_to_bus((unsigned long)buffer),
+				    &rbuffer);
+	if (ret)
+		return ret;
+
+	invalidate_dcache_range((unsigned long)buffer,
+				(unsigned long)((void *)buffer +
+				roundup(buffer->buf_size, ARCH_DMA_MINALIGN)));
+
+	if (rbuffer != phys_to_bus((unsigned long)buffer)) {
+		printf("mbox: Response buffer mismatch\n");
+		return -1;
+	}
+
+#ifdef DEBUG
+	printf("mbox: RX buffer\n");
+	dump_buf(buffer);
+#endif
+
+	/* Validate overall response status */
+
+	if (buffer->code != BCM2835_MBOX_RESP_CODE_SUCCESS) {
+		printf("mbox: Header response code invalid\n");
+		return -1;
+	}
+
+	/* Validate each tag's response status */
+
+	tag = (void *)(buffer + 1);
+	tag_index = 0;
+	while (tag->tag) {
+		if (!(tag->val_len & BCM2835_MBOX_TAG_VAL_LEN_RESPONSE)) {
+			printf("mbox: Tag %d missing val_len response bit\n",
+				tag_index);
+			return -1;
+		}
+		/*
+		 * Clear the reponse bit so clients can just look right at the
+		 * length field without extra processing
+		 */
+		tag->val_len &= ~BCM2835_MBOX_TAG_VAL_LEN_RESPONSE;
+		tag = (void *)(((u8 *)tag) + sizeof(*tag) + tag->val_buf_size);
+		tag_index++;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/msg.c b/roms/u-boot/arch/arm/mach-bcm283x/msg.c
new file mode 100644
index 000000000..347aece3c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/msg.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 Stephen Warren
+ */
+
+#include <common.h>
+#include <memalign.h>
+#include <phys2bus.h>
+#include <asm/arch/mbox.h>
+#include <linux/delay.h>
+
+struct msg_set_power_state {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_set_power_state set_power_state;
+	u32 end_tag;
+};
+
+struct msg_get_clock_rate {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
+	u32 end_tag;
+};
+
+struct msg_query {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+	u32 end_tag;
+};
+
+struct msg_setup {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+	struct bcm2835_mbox_tag_virtual_w_h virtual_w_h;
+	struct bcm2835_mbox_tag_depth depth;
+	struct bcm2835_mbox_tag_pixel_order pixel_order;
+	struct bcm2835_mbox_tag_alpha_mode alpha_mode;
+	struct bcm2835_mbox_tag_virtual_offset virtual_offset;
+	struct bcm2835_mbox_tag_overscan overscan;
+	struct bcm2835_mbox_tag_allocate_buffer allocate_buffer;
+	struct bcm2835_mbox_tag_pitch pitch;
+	u32 end_tag;
+};
+
+struct msg_notify_vl805_reset {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_pci_dev_addr dev_addr;
+	u32 end_tag;
+};
+
+int bcm2835_power_on_module(u32 module)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_pwr);
+	BCM2835_MBOX_INIT_TAG(&msg_pwr->set_power_state,
+			      SET_POWER_STATE);
+	msg_pwr->set_power_state.body.req.device_id = module;
+	msg_pwr->set_power_state.body.req.state =
+		BCM2835_MBOX_SET_POWER_STATE_REQ_ON |
+		BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT;
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN,
+				     &msg_pwr->hdr);
+	if (ret) {
+		printf("bcm2835: Could not set module %u power state\n",
+		       module);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+int bcm2835_get_mmc_clock(u32 clock_id)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1);
+	int ret;
+
+	ret = bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
+	if (ret)
+		return ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_clk);
+	BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE);
+	msg_clk->get_clock_rate.body.req.clock_id = clock_id;
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
+	if (ret) {
+		printf("bcm2835: Could not query eMMC clock rate\n");
+		return -EIO;
+	}
+
+	return msg_clk->get_clock_rate.body.resp.rate_hz;
+}
+
+int bcm2835_get_video_size(int *widthp, int *heightp)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_query, msg_query, 1);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_query);
+	BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_query->physical_w_h,
+				     GET_PHYSICAL_W_H);
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_query->hdr);
+	if (ret) {
+		printf("bcm2835: Could not query display resolution\n");
+		return ret;
+	}
+	*widthp = msg_query->physical_w_h.body.resp.width;
+	*heightp = msg_query->physical_w_h.body.resp.height;
+
+	return 0;
+}
+
+int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp,
+			     int pixel_order, int alpha_mode, ulong *fb_basep,
+			     ulong *fb_sizep, int *pitchp)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_setup, msg_setup, 1);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_setup);
+	BCM2835_MBOX_INIT_TAG(&msg_setup->physical_w_h, SET_PHYSICAL_W_H);
+	msg_setup->physical_w_h.body.req.width = *widthp;
+	msg_setup->physical_w_h.body.req.height = *heightp;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_w_h, SET_VIRTUAL_W_H);
+	msg_setup->virtual_w_h.body.req.width = *widthp;
+	msg_setup->virtual_w_h.body.req.height = *heightp;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->depth, SET_DEPTH);
+	msg_setup->depth.body.req.bpp = 32;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->pixel_order, SET_PIXEL_ORDER);
+	msg_setup->pixel_order.body.req.order = pixel_order;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->alpha_mode, SET_ALPHA_MODE);
+	msg_setup->alpha_mode.body.req.alpha = alpha_mode;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_offset, SET_VIRTUAL_OFFSET);
+	msg_setup->virtual_offset.body.req.x = 0;
+	msg_setup->virtual_offset.body.req.y = 0;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->overscan, SET_OVERSCAN);
+	msg_setup->overscan.body.req.top = 0;
+	msg_setup->overscan.body.req.bottom = 0;
+	msg_setup->overscan.body.req.left = 0;
+	msg_setup->overscan.body.req.right = 0;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER);
+	msg_setup->allocate_buffer.body.req.alignment = 0x100;
+	BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_setup->pitch, GET_PITCH);
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr);
+	if (ret) {
+		printf("bcm2835: Could not configure display\n");
+		return ret;
+	}
+	*widthp = msg_setup->physical_w_h.body.resp.width;
+	*heightp = msg_setup->physical_w_h.body.resp.height;
+	*pitchp = msg_setup->pitch.body.resp.pitch;
+	*fb_basep = bus_to_phys(
+			msg_setup->allocate_buffer.body.resp.fb_address);
+	*fb_sizep = msg_setup->allocate_buffer.body.resp.fb_size;
+
+	return 0;
+}
+
+/*
+ * On the Raspberry Pi 4, after a PCI reset, VL805's (the xHCI chip) firmware
+ * may either be loaded directly from an EEPROM or, if not present, by the
+ * SoC's VideoCore. This informs VideoCore that VL805 needs its firmware
+ * loaded.
+ */
+int bcm2711_notify_vl805_reset(void)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_notify_vl805_reset,
+				 msg_notify_vl805_reset, 1);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_notify_vl805_reset);
+	BCM2835_MBOX_INIT_TAG(&msg_notify_vl805_reset->dev_addr,
+			      NOTIFY_XHCI_RESET);
+
+	/*
+	 * The pci device address is expected like this:
+	 *
+	 *   PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12
+	 *
+	 * But since RPi4's PCIe setup is hardwired, we know the address in
+	 * advance.
+	 */
+	msg_notify_vl805_reset->dev_addr.body.req.dev_addr = 0x100000;
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN,
+				     &msg_notify_vl805_reset->hdr);
+	if (ret) {
+		printf("bcm2711: Faild to load vl805's firmware, %d\n", ret);
+		return -EIO;
+	}
+
+	udelay(200);
+
+	return 0;
+}
+
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/phys2bus.c b/roms/u-boot/arch/arm/mach-bcm283x/phys2bus.c
new file mode 100644
index 000000000..8e4318bf5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/phys2bus.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 Stephen Warren
+ */
+
+#include <config.h>
+#include <phys2bus.h>
+
+unsigned long phys_to_bus(unsigned long phys)
+{
+#ifndef CONFIG_BCM2835
+	return 0xc0000000 | phys;
+#else
+	return 0x40000000 | phys;
+#endif
+}
+
+unsigned long bus_to_phys(unsigned long bus)
+{
+	return bus & ~0xc0000000;
+}
diff --git a/roms/u-boot/arch/arm/mach-bcm283x/reset.c b/roms/u-boot/arch/arm/mach-bcm283x/reset.c
new file mode 100644
index 000000000..f13ac0c63
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcm283x/reset.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/base.h>
+#include <asm/arch/wdog.h>
+#include <efi_loader.h>
+
+#define RESET_TIMEOUT 10
+
+/*
+ * The Raspberry Pi firmware uses the RSTS register to know which partiton
+ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10.
+ * Partiton 63 is a special partition used by the firmware to indicate halt.
+ */
+#define BCM2835_WDOG_RSTS_RASPBERRYPI_HALT	0x555
+
+/* max ticks timeout */
+#define BCM2835_WDOG_MAX_TIMEOUT	0x000fffff
+
+void hw_watchdog_disable(void) {}
+
+__efi_runtime_data struct bcm2835_wdog_regs *wdog_regs;
+
+static void __efi_runtime
+__reset_cpu(struct bcm2835_wdog_regs *wdog_regs, ulong ticks)
+{
+	uint32_t rstc, timeout;
+
+	if (ticks == 0) {
+		hw_watchdog_disable();
+		timeout = RESET_TIMEOUT;
+	} else
+		timeout = ticks & BCM2835_WDOG_MAX_TIMEOUT;
+
+	rstc = readl(&wdog_regs->rstc);
+	rstc &= ~BCM2835_WDOG_RSTC_WRCFG_MASK;
+	rstc |= BCM2835_WDOG_RSTC_WRCFG_FULL_RESET;
+
+	writel(BCM2835_WDOG_PASSWORD | timeout, &wdog_regs->wdog);
+	writel(BCM2835_WDOG_PASSWORD | rstc, &wdog_regs->rstc);
+}
+
+void reset_cpu(void)
+{
+	struct bcm2835_wdog_regs *regs =
+		(struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR;
+
+	__reset_cpu(regs, 0);
+}
+
+#ifdef CONFIG_EFI_LOADER
+
+void __efi_runtime EFIAPI efi_reset_system(
+			enum efi_reset_type reset_type,
+			efi_status_t reset_status,
+			unsigned long data_size, void *reset_data)
+{
+	u32 val;
+
+	if (reset_type == EFI_RESET_COLD ||
+	    reset_type == EFI_RESET_WARM ||
+	    reset_type == EFI_RESET_PLATFORM_SPECIFIC) {
+		__reset_cpu(wdog_regs, 0);
+	} else if (reset_type == EFI_RESET_SHUTDOWN) {
+		/*
+		 * We set the watchdog hard reset bit here to distinguish this reset
+		 * from the normal (full) reset. bootcode.bin will not reboot after a
+		 * hard reset.
+		 */
+		val = readl(&wdog_regs->rsts);
+		val |= BCM2835_WDOG_PASSWORD;
+		val |= BCM2835_WDOG_RSTS_RASPBERRYPI_HALT;
+		writel(val, &wdog_regs->rsts);
+		__reset_cpu(wdog_regs, 0);
+	}
+
+	while (1) { }
+}
+
+efi_status_t efi_reset_system_init(void)
+{
+	wdog_regs = (struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR;
+	return efi_add_runtime_mmio(&wdog_regs, sizeof(*wdog_regs));
+}
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-bcmstb/Kconfig b/roms/u-boot/arch/arm/mach-bcmstb/Kconfig
new file mode 100644
index 000000000..0a56c3c7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcmstb/Kconfig
@@ -0,0 +1,43 @@
+if ARCH_BCMSTB
+
+config TARGET_BCM7445
+	bool "Broadcom 7445 TSBL"
+	depends on ARCH_BCMSTB
+	help
+	  Support for the Broadcom 7445 SoC.  This port assumes BOLT
+	  is acting as the second stage bootloader, and U-Boot is
+	  acting as the third stage bootloader (TSBL), loaded by BOLT.
+
+config TARGET_BCM7260
+	bool "Broadcom 7260 TSBL"
+	depends on ARCH_BCMSTB
+	help
+	  Support for the Broadcom 7260 SoC.  This port assumes BOLT
+	  is acting as the second stage bootloader, and U-Boot is
+	  acting as the third stage bootloader (TSBL), loaded by BOLT.
+
+config SYS_CPU
+	default "armv7"
+
+config SYS_BOARD
+	default "bcmstb"
+
+config SYS_VENDOR
+	default "broadcom"
+
+config SYS_SOC
+	default "bcmstb"
+
+config SYS_CONFIG_NAME
+	default "bcm7445" if TARGET_BCM7445
+	default "bcm7260" if TARGET_BCM7260
+
+config SYS_FDT_SAVE_ADDRESS
+	hex "Address to which the prior stage provided DTB will be copied"
+	default 0x1f00000
+
+config BCMSTB_SDHCI_INDEX
+	int "Index of preferred BCMSTB SDHCI alias in DTB"
+	default 1
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-bcmstb/Makefile b/roms/u-boot/arch/arm/mach-bcmstb/Makefile
new file mode 100644
index 000000000..71e5727e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcmstb/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2018  Cisco Systems, Inc.
+#
+# Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+#
+
+obj-y	:= lowlevel_init.o
diff --git a/roms/u-boot/arch/arm/mach-bcmstb/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-bcmstb/include/mach/gpio.h
new file mode 100644
index 000000000..bffecf9bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcmstb/include/mach/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018  Cisco Systems, Inc.
+ *
+ * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+ */
+
+#ifndef _BCMSTB_GPIO_H
+#define _BCMSTB_GPIO_H
+
+#endif /* _BCMSTB_GPIO_H */
diff --git a/roms/u-boot/arch/arm/mach-bcmstb/include/mach/hardware.h b/roms/u-boot/arch/arm/mach-bcmstb/include/mach/hardware.h
new file mode 100644
index 000000000..76f799d02
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcmstb/include/mach/hardware.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018  Cisco Systems, Inc.
+ *
+ * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+ */
+
+#ifndef _BCMSTB_HARDWARE_H
+#define _BCMSTB_HARDWARE_H
+
+#endif /* _BCMSTB_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-bcmstb/include/mach/sdhci.h b/roms/u-boot/arch/arm/mach-bcmstb/include/mach/sdhci.h
new file mode 100644
index 000000000..243783d68
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcmstb/include/mach/sdhci.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018  Cisco Systems, Inc.
+ *
+ * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+ */
+
+#ifndef _BCMSTB_SDHCI_H
+#define _BCMSTB_SDHCI_H
+
+#include <linux/types.h>
+
+int bcmstb_sdhci_init(phys_addr_t regbase);
+
+#endif /* _BCMSTB_SDHCI_H */
diff --git a/roms/u-boot/arch/arm/mach-bcmstb/include/mach/timer.h b/roms/u-boot/arch/arm/mach-bcmstb/include/mach/timer.h
new file mode 100644
index 000000000..039dd664c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcmstb/include/mach/timer.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018  Cisco Systems, Inc.
+ *
+ * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+ */
+
+#ifndef _BCMSTB_TIMER_H
+#define _BCMSTB_TIMER_H
+
+uint64_t get_ticks(void);
+
+#endif /* _BCMSTB_TIMER_H */
diff --git a/roms/u-boot/arch/arm/mach-bcmstb/lowlevel_init.S b/roms/u-boot/arch/arm/mach-bcmstb/lowlevel_init.S
new file mode 100644
index 000000000..aa81f7024
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-bcmstb/lowlevel_init.S
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018  Cisco Systems, Inc.
+ *
+ * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(save_boot_params)
+	ldr	r6, =bcmstb_boot_parameters
+	str	r0, [r6, #0]
+	str	r1, [r6, #4]
+	str	r2, [r6, #8]
+	str	r3, [r6, #12]
+	str	sp, [r6, #16]
+	str	lr, [r6, #20]
+	ldr	r6, =prior_stage_fdt_address
+	str	r2, [r6]
+	b	save_boot_params_ret
+ENDPROC(save_boot_params)
diff --git a/roms/u-boot/arch/arm/mach-cortina/Makefile b/roms/u-boot/arch/arm/mach-cortina/Makefile
new file mode 100644
index 000000000..ffb869227
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-cortina/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2020 Cortina Access Inc.
+#
+obj-y += lowlevel_init.o
diff --git a/roms/u-boot/arch/arm/mach-davinci/Kconfig b/roms/u-boot/arch/arm/mach-davinci/Kconfig
new file mode 100644
index 000000000..6eca8db6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/Kconfig
@@ -0,0 +1,140 @@
+if ARCH_DAVINCI
+
+choice
+	prompt "DaVinci board select"
+	optional
+
+config TARGET_DA850EVM
+	bool "DA850 EVM board"
+	select MACH_DAVINCI_DA850_EVM
+	select SOC_DA850
+	select SUPPORT_SPL
+
+config TARGET_OMAPL138_LCDK
+	bool "OMAPL138 LCDK"
+	select SOC_DA8XX
+	select SUPPORT_SPL
+	select SPL_BOARD_INIT
+
+config TARGET_LEGOEV3
+	bool "LEGO MINDSTORMS EV3"
+	select MACH_DAVINCI_DA850_EVM
+	select SOC_DA850
+
+endchoice
+
+config SYS_SOC
+	default "davinci"
+
+config DA850_LOWLEVEL
+	bool "Enable Lowlevel DA850 initialization"
+	depends on SOC_DA850
+
+config SYS_DA850_PLL_INIT
+	bool
+
+config SYS_DA850_DDR_INIT
+	bool
+
+config SOC_DA850
+	bool
+	select SOC_DA8XX
+
+config SOC_DA8XX
+	bool
+	select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL
+	select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL
+
+config MACH_DAVINCI_DA850_EVM
+	bool
+
+if SYS_DA850_PLL_INIT
+comment "DA850 PLL Initialization Parameters"
+
+config SYS_DV_CLKMODE
+	int "PLLCTL Clock Mode"
+	default 0
+	help
+	  Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator
+
+config SYS_DA850_PLL0_POSTDIV
+	int "PLLC0 PLL Post-Divider"
+	default 1
+	help
+	  Value written to PLLC0 PLL Post-Divider Control Register
+
+config SYS_DA850_PLL0_PLLDIV1
+	hex "PLLC0 Divider 1"
+	default 0x8000
+	help
+	  Value written to PLLC0 Divider 1 register
+
+config SYS_DA850_PLL0_PLLDIV2
+	hex "PLLC0 Divider 2"
+	default 0x8001
+	help
+	  Value written to PLLC0 Divider 2 register
+
+config SYS_DA850_PLL0_PLLDIV3
+	hex "PLLC0 Divider 3"
+	default 0x8002
+	help
+	  Value written to PLLC0 Divider 3 register
+
+config SYS_DA850_PLL0_PLLDIV4
+	hex "PLLC0 Divider 4"
+	default 0x8003
+	help
+	  Value written to PLLC0 Divider 4 register
+
+config SYS_DA850_PLL0_PLLDIV5
+	hex "PLLC0 Divider 5"
+	default 0x8002
+	help
+	  Value written to PLLC0 Divider 5 register
+
+config SYS_DA850_PLL0_PLLDIV6
+	hex "PLLC0 Divider 6"
+	default 0x8000
+	help
+	  Value written to PLLC0 Divider 6 register
+
+config SYS_DA850_PLL0_PLLDIV7
+	hex "PLLC0 Divider 7"
+	default 0x8005
+	help
+	  Value written to PLLC0 Divider 7 register
+
+config SYS_DA850_PLL1_POSTDIV
+	hex "PLLC1 PLL Post-Divider"
+	default 1
+	help
+	  Value written to PLLC1 PLL Post-Divider Control Register
+
+config SYS_DA850_PLL1_PLLDIV1
+	hex "PLLC1 Divider 2"
+	default 0x8000
+	help
+	  Value written to PLLC1 Divider 1 register
+
+config SYS_DA850_PLL1_PLLDIV2
+	hex "PLLC1 Divider 2"
+	default 0x8001
+	help
+	  Value written to PLLC1 Divider 2 register
+
+config SYS_DA850_PLL1_PLLDIV3
+	hex "PLLC1 Divider 3"
+	default 0x8002
+	help
+	  Value written to PLLC1 Divider 3 register
+
+endif
+
+source "board/davinci/da8xxevm/Kconfig"
+source "board/lego/ev3/Kconfig"
+
+config SPL_LDSCRIPT
+	default "board/davinci/da8xxevm/u-boot-spl-da850evm.lds"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-davinci/Makefile b/roms/u-boot/arch/arm/mach-davinci/Makefile
new file mode 100644
index 000000000..ed8827407
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+
+obj-y				+= cpu.o misc.o timer.o psc.o pinmux.o reset.o
+obj-$(CONFIG_DA850_LOWLEVEL)	+= da850_lowlevel.o
+obj-$(CONFIG_SOC_DM355)	+= dm355.o
+obj-$(CONFIG_SOC_DM365)	+= dm365.o
+obj-$(CONFIG_SOC_DM644X)	+= dm644x.o
+obj-$(CONFIG_SOC_DM646X)	+= dm646x.o
+obj-$(CONFIG_SOC_DA850)	+= da850_pinmux.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_FRAMEWORK)	+= spl.o
+obj-$(CONFIG_SOC_DM365)	+= dm365_lowlevel.o
+obj-$(CONFIG_SOC_DA8XX)	+= da850_lowlevel.o
+endif
diff --git a/roms/u-boot/arch/arm/mach-davinci/config.mk b/roms/u-boot/arch/arm/mach-davinci/config.mk
new file mode 100644
index 000000000..4674cae43
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/config.mk
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2012, Texas Instruments, Incorporated - http://www.ti.com/
+ifndef CONFIG_SPL_BUILD
+INPUTS-$(CONFIG_SPL_FRAMEWORK)	+= u-boot.ais
+endif
diff --git a/roms/u-boot/arch/arm/mach-davinci/cpu.c b/roms/u-boot/arch/arm/mach-davinci/cpu.c
new file mode 100644
index 000000000..aefd21dc4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/cpu.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2004 Texas Instruments.
+ * Copyright (C) 2009 David Brownell
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/arch/hardware.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* offsets from PLL controller base */
+#define PLLC_PLLCTL	0x100
+#define PLLC_PLLM	0x110
+#define PLLC_PREDIV	0x114
+#define PLLC_PLLDIV1	0x118
+#define PLLC_PLLDIV2	0x11c
+#define PLLC_PLLDIV3	0x120
+#define PLLC_POSTDIV	0x128
+#define PLLC_BPDIV	0x12c
+#define PLLC_PLLDIV4	0x160
+#define PLLC_PLLDIV5	0x164
+#define PLLC_PLLDIV6	0x168
+#define PLLC_PLLDIV7	0x16c
+#define PLLC_PLLDIV8	0x170
+#define PLLC_PLLDIV9	0x174
+
+unsigned int sysdiv[9] = {
+	PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5,
+	PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9
+};
+
+int clk_get(enum davinci_clk_ids id)
+{
+	int pre_div;
+	int pllm;
+	int post_div;
+	int pll_out;
+	unsigned int pll_base;
+
+	pll_out = CONFIG_SYS_OSCIN_FREQ;
+
+	if (id == DAVINCI_AUXCLK_CLKID)
+		goto out;
+
+	if ((id >> 16) == 1)
+		pll_base = (unsigned int)davinci_pllc1_regs;
+	else
+		pll_base = (unsigned int)davinci_pllc0_regs;
+
+	id &= 0xFFFF;
+
+	/*
+	 * Lets keep this simple. Combining operations can result in
+	 * unexpected approximations
+	 */
+	pre_div = (readl(pll_base + PLLC_PREDIV) &
+		DAVINCI_PLLC_DIV_MASK) + 1;
+	pllm = readl(pll_base + PLLC_PLLM) + 1;
+
+	pll_out /= pre_div;
+	pll_out *= pllm;
+
+	if (id == DAVINCI_PLLM_CLKID)
+		goto out;
+
+	post_div = (readl(pll_base + PLLC_POSTDIV) &
+		DAVINCI_PLLC_DIV_MASK) + 1;
+
+	pll_out /= post_div;
+
+	if (id == DAVINCI_PLLC_CLKID)
+		goto out;
+
+	pll_out /= (readl(pll_base + sysdiv[id - 1]) &
+		DAVINCI_PLLC_DIV_MASK) + 1;
+
+out:
+	return pll_out;
+}
+
+int set_cpu_clk_info(void)
+{
+	gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000;
+	/* DDR PHY uses an x2 input clock */
+	gd->bd->bi_ddr_freq = cpu_is_da830() ? 0 :
+				(clk_get(DAVINCI_DDR_CLKID) / 1000000);
+	gd->bd->bi_dsp_freq = 0;
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-davinci/da850_lowlevel.c b/roms/u-boot/arch/arm/mach-davinci/da850_lowlevel.c
new file mode 100644
index 000000000..759c93747
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/da850_lowlevel.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SoC-specific lowlevel code for DA850
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#include <common.h>
+#include <init.h>
+#include <nand.h>
+#include <ns16550.h>
+#include <post.h>
+#include <asm/arch/da850_lowlevel.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/davinci_misc.h>
+#include <asm/arch/ddr2_defs.h>
+#include <asm/ti-common/davinci_nand.h>
+#include <asm/arch/pll_defs.h>
+
+void davinci_enable_uart0(void)
+{
+	lpsc_on(DAVINCI_LPSC_UART0);
+
+	/* Bringup UART0 out of reset */
+	REG(UART0_PWREMU_MGMT) = 0x00006001;
+}
+
+#if defined(CONFIG_SYS_DA850_PLL_INIT)
+static void da850_waitloop(unsigned long loopcnt)
+{
+	unsigned long	i;
+
+	for (i = 0; i < loopcnt; i++)
+		asm("   NOP");
+}
+
+static int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
+{
+	if (reg == davinci_pllc0_regs)
+		/* Unlock PLL registers. */
+		clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK);
+
+	/*
+	 * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
+	 * through MMR
+	 */
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLENSRC);
+	/* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
+	clrbits_le32(&reg->pllctl, PLLCTL_EXTCLKSRC);
+
+	/* Set PLLEN=0 => PLL BYPASS MODE */
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLEN);
+
+	da850_waitloop(150);
+
+	if (reg == davinci_pllc0_regs) {
+		/*
+		 * Select the Clock Mode bit 8 as External Clock or On Chip
+		 * Oscilator
+		 */
+		dv_maskbits(&reg->pllctl, ~PLLCTL_RES_9);
+		setbits_le32(&reg->pllctl,
+			(CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT));
+	}
+
+	/* Clear PLLRST bit to reset the PLL */
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLRST);
+
+	/* Disable the PLL output */
+	setbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
+
+	/* PLL initialization sequence */
+	/*
+	 * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
+	 * power down bit
+	 */
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLPWRDN);
+
+	/* Enable the PLL from Disable Mode PLLDIS bit to 0 */
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
+
+#if defined(CONFIG_SYS_DA850_PLL0_PREDIV)
+	/* program the prediv */
+	if (reg == davinci_pllc0_regs && CONFIG_SYS_DA850_PLL0_PREDIV)
+		writel((PLL_DIVEN | CONFIG_SYS_DA850_PLL0_PREDIV),
+			&reg->prediv);
+#endif
+
+	/* Program the required multiplier value in PLLM */
+	writel(pllmult, &reg->pllm);
+
+	/* program the postdiv */
+	if (reg == davinci_pllc0_regs)
+		writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV),
+			&reg->postdiv);
+	else
+		writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV),
+			&reg->postdiv);
+
+	/*
+	 * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
+	 * no GO operation is currently in progress
+	 */
+	while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
+		;
+
+	if (reg == davinci_pllc0_regs) {
+		writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, &reg->plldiv1);
+		writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, &reg->plldiv2);
+		writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, &reg->plldiv3);
+		writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, &reg->plldiv4);
+		writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, &reg->plldiv5);
+		writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, &reg->plldiv6);
+		writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, &reg->plldiv7);
+	} else {
+		writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, &reg->plldiv1);
+		writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, &reg->plldiv2);
+		writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, &reg->plldiv3);
+	}
+
+	/*
+	 * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
+	 * transition.
+	 */
+	setbits_le32(&reg->pllcmd, PLLCMD_GOSTAT);
+
+	/*
+	 * Wait for the GOSTAT bit in PLLSTAT to clear to 0
+	 * (completion of phase alignment).
+	 */
+	while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
+		;
+
+	/* Wait for PLL to reset properly. See PLL spec for PLL reset time */
+	da850_waitloop(200);
+
+	/* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
+	setbits_le32(&reg->pllctl, PLLCTL_PLLRST);
+
+	/* Wait for PLL to lock. See PLL spec for PLL lock time */
+	da850_waitloop(2400);
+
+	/*
+	 * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
+	 * mode
+	 */
+	setbits_le32(&reg->pllctl, PLLCTL_PLLEN);
+
+
+	/*
+	 * clear EMIFA and EMIFB clock source settings, let them
+	 * run off SYSCLK
+	 */
+	if (reg == davinci_pllc0_regs)
+		dv_maskbits(&davinci_syscfg_regs->cfgchip3,
+			~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC));
+
+	return 0;
+}
+#endif /* CONFIG_SYS_DA850_PLL_INIT */
+
+#if defined(CONFIG_SYS_DA850_DDR_INIT)
+static int da850_ddr_setup(void)
+{
+	unsigned long	tmp;
+
+	/* Enable the Clock to DDR2/mDDR */
+	lpsc_on(DAVINCI_LPSC_DDR_EMIF);
+
+	tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+	if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
+		/* Begin VTP Calibration */
+		clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+		clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+		clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+
+		/* Polling READY bit to see when VTP calibration is done */
+		tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+		while ((tmp & VTP_READY) != VTP_READY)
+			tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+
+		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+	}
+	setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
+	writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
+
+	if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) {
+		/* DDR2 */
+		clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
+			(1 << DDR_SLEW_DDR_PDENA_BIT) |
+			(1 << DDR_SLEW_CMOSEN_BIT));
+	} else {
+		/* MOBILE DDR */
+		setbits_le32(&davinci_syscfg1_regs->ddr_slew,
+			(1 << DDR_SLEW_DDR_PDENA_BIT) |
+			(1 << DDR_SLEW_CMOSEN_BIT));
+	}
+
+	/*
+	 * SDRAM Configuration Register (SDCR):
+	 * First set the BOOTUNLOCK bit to make configuration bits
+	 * writeable.
+	 */
+	setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
+
+	/*
+	 * Write the new value of these bits and clear BOOTUNLOCK.
+	 * At the same time, set the TIMUNLOCK bit to allow changing
+	 * the timing registers
+	 */
+	tmp = CONFIG_SYS_DA850_DDR2_SDBCR;
+	tmp &= ~DV_DDR_BOOTUNLOCK;
+	tmp |= DV_DDR_TIMUNLOCK;
+	writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
+
+	/* write memory configuration and timing */
+	if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) {
+		/* MOBILE DDR only*/
+		writel(CONFIG_SYS_DA850_DDR2_SDBCR2,
+			&dv_ddr2_regs_ctrl->sdbcr2);
+	}
+	writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
+	writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
+
+	/* clear the TIMUNLOCK bit and write the value of the CL field */
+	tmp &= ~DV_DDR_TIMUNLOCK;
+	writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
+
+	/*
+	 * LPMODEN and MCLKSTOPEN must be set!
+	 * Without this bits set, PSC don;t switch states !!
+	 */
+	writel(CONFIG_SYS_DA850_DDR2_SDRCR |
+		(1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
+		(1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
+		&dv_ddr2_regs_ctrl->sdrcr);
+
+	/* SyncReset the Clock to EMIF3A SDRAM */
+	lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
+	/* Enable the Clock to EMIF3A SDRAM */
+	lpsc_on(DAVINCI_LPSC_DDR_EMIF);
+
+	/* disable self refresh */
+	clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
+		DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN);
+	writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
+
+	return 0;
+}
+#endif /* CONFIG_SYS_DA850_DDR_INIT */
+
+__attribute__((weak))
+void board_gpio_init(void)
+{
+	return;
+}
+
+int arch_cpu_init(void)
+{
+	/* Unlock kick registers */
+	writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
+	writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
+
+	dv_maskbits(&davinci_syscfg_regs->suspsrc,
+		CONFIG_SYS_DA850_SYSCFG_SUSPSRC);
+
+	/* configure pinmux settings */
+	if (davinci_configure_pin_mux_items(pinmuxes, pinmuxes_size))
+		return 1;
+
+#if defined(CONFIG_SYS_DA850_PLL_INIT)
+	/* PLL setup */
+	da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM);
+	da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM);
+#endif
+	/* setup CSn config */
+#if defined(CONFIG_SYS_DA850_CS2CFG)
+	writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
+#endif
+#if defined(CONFIG_SYS_DA850_CS3CFG)
+	writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
+#endif
+
+	da8xx_configure_lpsc_items(lpsc, lpsc_size);
+
+	/* GPIO setup */
+	board_gpio_init();
+
+#if !CONFIG_IS_ENABLED(DM_SERIAL)
+	ns16550_init((struct ns16550 *)(CONFIG_SYS_NS16550_COM1),
+		     CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+#endif
+	/*
+	 * Fix Power and Emulation Management Register
+	 * see sprufw3a.pdf page 37 Table 24
+	 */
+	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+		DAVINCI_UART_PWREMU_MGMT_UTRST),
+#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE)
+	       &davinci_uart0_ctrl_regs->pwremu_mgmt);
+#else
+	       &davinci_uart2_ctrl_regs->pwremu_mgmt);
+#endif
+
+#if defined(CONFIG_SYS_DA850_DDR_INIT)
+	da850_ddr_setup();
+#endif
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-davinci/da850_pinmux.c b/roms/u-boot/arch/arm/mach-davinci/da850_pinmux.c
new file mode 100644
index 000000000..f2536c8dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/da850_pinmux.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Pinmux configurations for the DA850 SoCs
+ *
+ * Copyright (C) 2011 OMICRON electronics GmbH
+ */
+
+#include <common.h>
+#include <asm/arch/davinci_misc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pinmux_defs.h>
+
+/* SPI pin muxer settings */
+const struct pinmux_config spi0_pins_base[] = {
+	{ pinmux(3), 1, 0 }, /* SPI0_CLK */
+	{ pinmux(3), 1, 2 }, /* SPI0_SOMI */
+	{ pinmux(3), 1, 3 }, /* SPI0_SIMO */
+};
+
+const struct pinmux_config spi0_pins_scs0[] = {
+	{ pinmux(4), 1, 1 }, /* SPI0_SCS[0] */
+};
+
+const struct pinmux_config spi1_pins_base[] = {
+	{ pinmux(5), 1, 2 }, /* SPI1_CLK */
+	{ pinmux(5), 1, 4 }, /* SPI1_SOMI */
+	{ pinmux(5), 1, 5 }, /* SPI1_SIMO */
+};
+
+const struct pinmux_config spi1_pins_scs0[] = {
+	{ pinmux(5), 1, 1 }, /* SPI1_SCS[0] */
+};
+
+/* UART pin muxer settings */
+const struct pinmux_config uart0_pins_txrx[] = {
+	{ pinmux(3), 2, 4 }, /* UART0_RXD */
+	{ pinmux(3), 2, 5 }, /* UART0_TXD */
+};
+
+const struct pinmux_config uart0_pins_rtscts[] = {
+	{ pinmux(3), 2, 6 },
+	{ pinmux(3), 2, 7 },
+};
+
+const struct pinmux_config uart1_pins_txrx[] = {
+	{ pinmux(4), 2, 6 }, /* UART1_RXD */
+	{ pinmux(4), 2, 7 }, /* UART1_TXD */
+};
+
+const struct pinmux_config uart2_pins_txrx[] = {
+	{ pinmux(4), 2, 4 }, /* UART2_RXD */
+	{ pinmux(4), 2, 5 }, /* UART2_TXD */
+};
+
+const struct pinmux_config uart2_pins_rtscts[] = {
+	{ pinmux(0), 4, 6 }, /* UART2_RTS */
+	{ pinmux(0), 4, 7 }, /* UART2_CTS */
+};
+
+/* EMAC pin muxer settings*/
+const struct pinmux_config emac_pins_rmii[] = {
+	{ pinmux(14), 8, 2 }, /* RMII_TXD[1] */
+	{ pinmux(14), 8, 3 }, /* RMII_TXD[0] */
+	{ pinmux(14), 8, 4 }, /* RMII_TXEN */
+	{ pinmux(14), 8, 5 }, /* RMII_RXD[1] */
+	{ pinmux(14), 8, 6 }, /* RMII_RXD[0] */
+	{ pinmux(14), 8, 7 }, /* RMII_RXER */
+	{ pinmux(15), 0, 0 }, /* RMII_MHz_50_CLK */
+	{ pinmux(15), 8, 1 }, /* RMII_CRS_DV */
+};
+
+const struct pinmux_config emac_pins_mii[] = {
+	{ pinmux(2), 8, 1 }, /* MII_TXEN */
+	{ pinmux(2), 8, 2 }, /* MII_TXCLK */
+	{ pinmux(2), 8, 3 }, /* MII_COL */
+	{ pinmux(2), 8, 4 }, /* MII_TXD[3] */
+	{ pinmux(2), 8, 5 }, /* MII_TXD[2] */
+	{ pinmux(2), 8, 6 }, /* MII_TXD[1] */
+	{ pinmux(2), 8, 7 }, /* MII_TXD[0] */
+	{ pinmux(3), 8, 0 }, /* MII_RXCLK */
+	{ pinmux(3), 8, 1 }, /* MII_RXDV */
+	{ pinmux(3), 8, 2 }, /* MII_RXER */
+	{ pinmux(3), 8, 3 }, /* MII_CRS */
+	{ pinmux(3), 8, 4 }, /* MII_RXD[3] */
+	{ pinmux(3), 8, 5 }, /* MII_RXD[2] */
+	{ pinmux(3), 8, 6 }, /* MII_RXD[1] */
+	{ pinmux(3), 8, 7 }, /* MII_RXD[0] */
+};
+
+const struct pinmux_config emac_pins_mdio[] = {
+	{ pinmux(4), 8, 0 }, /* MDIO_CLK */
+	{ pinmux(4), 8, 1 }, /* MDIO_D */
+};
+
+/* I2C pin muxer settings */
+const struct pinmux_config i2c0_pins[] = {
+	{ pinmux(4), 2, 2 }, /* I2C0_SCL */
+	{ pinmux(4), 2, 3 }, /* I2C0_SDA */
+};
+
+const struct pinmux_config i2c1_pins[] = {
+	{ pinmux(4), 4, 4 }, /* I2C1_SCL */
+	{ pinmux(4), 4, 5 }, /* I2C1_SDA */
+};
+
+/* EMIFA pin muxer settings */
+const struct pinmux_config emifa_pins_cs2[] = {
+	{ pinmux(7), 1, 0 }, /* EMA_CS2 */
+};
+
+const struct pinmux_config emifa_pins_cs3[] = {
+	{ pinmux(7), 1, 1 }, /* EMA_CS[3] */
+};
+
+const struct pinmux_config emifa_pins_cs4[] = {
+	{ pinmux(7), 1, 2 }, /* EMA_CS[4] */
+};
+
+const struct pinmux_config emifa_pins_nand[] = {
+	{ pinmux(7), 1, 4 },  /* EMA_WE */
+	{ pinmux(7), 1, 5 },  /* EMA_OE */
+	{ pinmux(9), 1, 0 },  /* EMA_D[7] */
+	{ pinmux(9), 1, 1 },  /* EMA_D[6] */
+	{ pinmux(9), 1, 2 },  /* EMA_D[5] */
+	{ pinmux(9), 1, 3 },  /* EMA_D[4] */
+	{ pinmux(9), 1, 4 },  /* EMA_D[3] */
+	{ pinmux(9), 1, 5 },  /* EMA_D[2] */
+	{ pinmux(9), 1, 6 },  /* EMA_D[1] */
+	{ pinmux(9), 1, 7 },  /* EMA_D[0] */
+	{ pinmux(12), 1, 5 }, /* EMA_A[2] */
+	{ pinmux(12), 1, 6 }, /* EMA_A[1] */
+};
+
+/* NOR pin muxer settings */
+const struct pinmux_config emifa_pins_nor[] = {
+	{ pinmux(5), 1, 6 },  /* EMA_BA[1] */
+	{ pinmux(6), 1, 6 },  /* EMA_WAIT[1] */
+	{ pinmux(7), 1, 4 },  /* EMA_WE */
+	{ pinmux(7), 1, 5 },  /* EMA_OE */
+	{ pinmux(8), 1, 0 },  /* EMA_D[15] */
+	{ pinmux(8), 1, 1 },  /* EMA_D[14] */
+	{ pinmux(8), 1, 2 },  /* EMA_D[13] */
+	{ pinmux(8), 1, 3 },  /* EMA_D[12] */
+	{ pinmux(8), 1, 4 },  /* EMA_D[11] */
+	{ pinmux(8), 1, 5 },  /* EMA_D[10] */
+	{ pinmux(8), 1, 6 },  /* EMA_D[9] */
+	{ pinmux(8), 1, 7 },  /* EMA_D[8] */
+	{ pinmux(9), 1, 0 },  /* EMA_D[7] */
+	{ pinmux(9), 1, 1 },  /* EMA_D[6] */
+	{ pinmux(9), 1, 2 },  /* EMA_D[5] */
+	{ pinmux(9), 1, 3 },  /* EMA_D[4] */
+	{ pinmux(9), 1, 4 },  /* EMA_D[3] */
+	{ pinmux(9), 1, 5 },  /* EMA_D[2] */
+	{ pinmux(9), 1, 6 },  /* EMA_D[1] */
+	{ pinmux(9), 1, 7 },  /* EMA_D[0] */
+	{ pinmux(10), 1, 1 }, /* EMA_A[22] */
+	{ pinmux(10), 1, 2 }, /* EMA_A[21] */
+	{ pinmux(10), 1, 3 }, /* EMA_A[20] */
+	{ pinmux(10), 1, 4 }, /* EMA_A[19] */
+	{ pinmux(10), 1, 5 }, /* EMA_A[18] */
+	{ pinmux(10), 1, 6 }, /* EMA_A[17] */
+	{ pinmux(10), 1, 7 }, /* EMA_A[16] */
+	{ pinmux(11), 1, 0 }, /* EMA_A[15] */
+	{ pinmux(11), 1, 1 }, /* EMA_A[14] */
+	{ pinmux(11), 1, 2 }, /* EMA_A[13] */
+	{ pinmux(11), 1, 3 }, /* EMA_A[12] */
+	{ pinmux(11), 1, 4 }, /* EMA_A[11] */
+	{ pinmux(11), 1, 5 }, /* EMA_A[10] */
+	{ pinmux(11), 1, 6 }, /* EMA_A[9] */
+	{ pinmux(11), 1, 7 }, /* EMA_A[8] */
+	{ pinmux(12), 1, 0 }, /* EMA_A[7] */
+	{ pinmux(12), 1, 1 }, /* EMA_A[6] */
+	{ pinmux(12), 1, 2 }, /* EMA_A[5] */
+	{ pinmux(12), 1, 3 }, /* EMA_A[4] */
+	{ pinmux(12), 1, 4 }, /* EMA_A[3] */
+	{ pinmux(12), 1, 5 }, /* EMA_A[2] */
+	{ pinmux(12), 1, 6 }, /* EMA_A[1] */
+	{ pinmux(12), 1, 7 }, /* EMA_A[0] */
+};
+
+/* MMC0 pin muxer settings */
+const struct pinmux_config mmc0_pins[] = {
+	{ pinmux(10), 2, 0 },	/* MMCSD0_CLK */
+	{ pinmux(10), 2, 1 },	/* MMCSD0_CMD */
+	{ pinmux(10), 2, 2 },	/* MMCSD0_DAT_0 */
+	{ pinmux(10), 2, 3 },	/* MMCSD0_DAT_1 */
+	{ pinmux(10), 2, 4 },	/* MMCSD0_DAT_2 */
+	{ pinmux(10), 2, 5 },	/* MMCSD0_DAT_3 */
+	/* DA850 supports only 4-bit mode, remaining pins are not configured */
+};
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/aintc_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/aintc_defs.h
new file mode 100644
index 000000000..7419a58bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/aintc_defs.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#ifndef _DV_AINTC_DEFS_H_
+#define _DV_AINTC_DEFS_H_
+
+struct dv_aintc_regs {
+	unsigned int	fiq0;		/* 0x00 */
+	unsigned int	fiq1;		/* 0x04 */
+	unsigned int	irq0;		/* 0x08 */
+	unsigned int	irq1;		/* 0x0c */
+	unsigned int	fiqentry;	/* 0x10 */
+	unsigned int	irqentry;	/* 0x14 */
+	unsigned int	eint0;		/* 0x18 */
+	unsigned int	eint1;		/* 0x1c */
+	unsigned int	intctl;		/* 0x20 */
+	unsigned int	eabase;		/* 0x24 */
+	unsigned char	rsvd0[8];	/* 0x28 */
+	unsigned int	intpri0;	/* 0x30 */
+	unsigned int	intpri1;	/* 0x34 */
+	unsigned int	intpri2;	/* 0x38 */
+	unsigned int	intpri3;	/* 0x3c */
+	unsigned int	intpri4;	/* 0x40 */
+	unsigned int	intpri5;	/* 0x44 */
+	unsigned int	intpri6;	/* 0x48 */
+	unsigned int	intpri7;	/* 0x4c */
+};
+
+#define dv_aintc_regs ((struct dv_aintc_regs *)DAVINCI_ARM_INTC_BASE)
+
+#define DV_AINTC_INTCTL_IDMODE	(1 << 2)
+
+#endif /* _DV_AINTC_DEFS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/da850_lowlevel.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/da850_lowlevel.h
new file mode 100644
index 000000000..bb23ad3f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/da850_lowlevel.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SoC-specific lowlevel code for DA850
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#ifndef __DA850_LOWLEVEL_H
+#define __DA850_LOWLEVEL_H
+
+#include <asm/arch/pinmux_defs.h>
+
+/* pinmux_resource[] vector is defined in the board specific file */
+extern const struct pinmux_resource pinmuxes[];
+extern const int pinmuxes_size;
+
+extern const struct lpsc_resource lpsc[];
+extern const int lpsc_size;
+
+/* NOR Boot Configuration Word Field Descriptions */
+#define DA850_NORBOOT_COPY_XK(X)	((X - 1) << 8)
+#define DA850_NORBOOT_METHOD_DIRECT	(1 << 4)
+#define DA850_NORBOOT_16BIT		(1 << 0)
+
+#define dv_maskbits(addr, val) \
+	writel((readl(addr) & val), addr)
+
+void da850_lpc_transition(unsigned char pscnum, unsigned char module,
+		unsigned char domain, unsigned char state);
+void da850_psc_init(void);
+void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
+	unsigned long value);
+
+#endif /* #ifndef __DA850_LOWLEVEL_H */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/da8xx-usb.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/da8xx-usb.h
new file mode 100644
index 000000000..215706e17
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/da8xx-usb.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * da8xx-usb.h -- TI's DA8xx platform specific usb wrapper definitions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/davinci.h
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ */
+#ifndef __DA8XX_MUSB_H__
+#define __DA8XX_MUSB_H__
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+
+/* Base address of da8xx usb0 wrapper */
+#define DA8XX_USB_OTG_BASE  0x01E00000
+
+/* Base address of da8xx musb core */
+#define DA8XX_USB_OTG_CORE_BASE (DA8XX_USB_OTG_BASE + 0x400)
+
+/* Timeout for DA8xx usb module */
+#define DA8XX_USB_OTG_TIMEOUT 0x3FFFFFF
+
+/*
+ * DA8xx platform USB wrapper register overlay.
+ */
+struct da8xx_usb_regs {
+	dv_reg	revision;
+	dv_reg	control;
+	dv_reg 	status;
+	dv_reg 	emulation;
+	dv_reg 	mode;
+	dv_reg 	autoreq;
+	dv_reg 	srpfixtime;
+	dv_reg 	teardown;
+	dv_reg 	intsrc;
+	dv_reg 	intsrc_set;
+	dv_reg 	intsrc_clr;
+	dv_reg 	intmsk;
+	dv_reg 	intmsk_set;
+	dv_reg 	intmsk_clr;
+	dv_reg 	intsrcmsk;
+	dv_reg 	eoi;
+	dv_reg 	intvector;
+	dv_reg 	grndis_size[4];
+};
+
+#define da8xx_usb_regs ((struct da8xx_usb_regs *)DA8XX_USB_OTG_BASE)
+
+/* DA8XX interrupt bits definitions */
+#define DA8XX_USB_TX_ENDPTS_MASK  0x1f	/* ep0 + 4 tx */
+#define DA8XX_USB_RX_ENDPTS_MASK  0x1e	/* 4 rx */
+#define DA8XX_USB_TXINT_SHIFT	  0
+#define DA8XX_USB_RXINT_SHIFT	  8
+
+#define DA8XX_USB_USBINT_MASK	  0x01ff0000	/* 8 Mentor, DRVVBUS */
+#define DA8XX_USB_TXINT_MASK \
+		(DA8XX_USB_TX_ENDPTS_MASK << DA8XX_USB_TXINT_SHIFT)
+#define DA8XX_USB_RXINT_MASK \
+		(DA8XX_USB_RX_ENDPTS_MASK << DA8XX_USB_RXINT_SHIFT)
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD	(1 << 17)
+#define CFGCHIP2_VBUSSENSE	(1 << 16)
+#define CFGCHIP2_RESET		(1 << 15)
+#define CFGCHIP2_OTGMODE	(3 << 13)
+#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
+#define CFGCHIP2_FORCE_HOST	(1 << 13)
+#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
+#define CFGCHIP2_PHYPWRDN	(1 << 10)
+#define CFGCHIP2_OTGPWRDN	(1 << 9)
+#define CFGCHIP2_DATPOL 	(1 << 8)
+#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
+#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
+#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
+#define CFGCHIP2_REFFREQ	(0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
+
+#define DA8XX_USB_VBUS_GPIO	(1 << 15)
+
+#endif	/* __DA8XX_MUSB_H__ */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/davinci_misc.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/davinci_misc.h
new file mode 100644
index 000000000..48b11f7a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/davinci_misc.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ */
+
+#ifndef __MISC_H
+#define __MISC_H
+
+#include <asm/arch/hardware.h>
+
+/* pin muxer definitions */
+#define PIN_MUX_NUM_FIELDS	8	/* Per register */
+#define PIN_MUX_FIELD_SIZE	4	/* n in bits */
+#define PIN_MUX_FIELD_MASK	((1 << PIN_MUX_FIELD_SIZE) - 1)
+
+/* pin definition */
+struct pinmux_config {
+	dv_reg		*mux;		/* Address of mux register */
+	unsigned char	value;		/* Value to set in field */
+	unsigned char	field;		/* field number */
+};
+
+/* pin table definition */
+struct pinmux_resource {
+	const struct pinmux_config	*pins;
+	const int 			n_pins;
+};
+
+#define PINMUX_ITEM(item) { \
+				.pins = item, \
+				.n_pins = ARRAY_SIZE(item) \
+			  }
+
+struct lpsc_resource {
+	const int	lpsc_no;
+};
+
+int dvevm_read_mac_address(uint8_t *buf);
+void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr);
+int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins);
+int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
+				    int n_items);
+#if defined(CONFIG_DRIVER_TI_EMAC)
+void davinci_emac_mii_mode_sel(int mode_sel);
+#endif
+void irq_init(void);
+int da8xx_configure_lpsc_items(const struct lpsc_resource *item,
+				    const int n_items);
+
+#endif /* __MISC_H */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/ddr2_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/ddr2_defs.h
new file mode 100644
index 000000000..bfdb74467
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/ddr2_defs.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#ifndef _DV_DDR2_DEFS_H_
+#define _DV_DDR2_DEFS_H_
+
+/*
+ * DDR2 Memory Ctrl Register structure
+ * See sprueh7d.pdf for more details.
+ */
+struct dv_ddr2_regs_ctrl {
+	unsigned char	rsvd0[4];	/* 0x00 */
+	unsigned int	sdrstat;	/* 0x04 */
+	unsigned int	sdbcr;		/* 0x08 */
+	unsigned int	sdrcr;		/* 0x0C */
+	unsigned int	sdtimr;		/* 0x10 */
+	unsigned int	sdtimr2;	/* 0x14 */
+	unsigned char	rsvd1[4];	/* 0x18 */
+	unsigned int	sdbcr2;		/* 0x1C */
+	unsigned int	pbbpr;		/* 0x20 */
+	unsigned char	rsvd2[156];	/* 0x24 */
+	unsigned int	irr;		/* 0xC0 */
+	unsigned int	imr;		/* 0xC4 */
+	unsigned int	imsr;		/* 0xC8 */
+	unsigned int	imcr;		/* 0xCC */
+	unsigned char	rsvd3[20];	/* 0xD0 */
+	unsigned int	ddrphycr;	/* 0xE4 */
+	unsigned int	ddrphycr2;	/* 0xE8 */
+	unsigned char	rsvd4[4];	/* 0xEC */
+};
+
+#define DV_DDR_PHY_PWRDNEN		0x40
+#define DV_DDR_PHY_EXT_STRBEN	0x80
+#define DV_DDR_PHY_RD_LATENCY_SHIFT	0
+
+#define DV_DDR_SDTMR1_RFC_SHIFT	25
+#define DV_DDR_SDTMR1_RP_SHIFT	22
+#define DV_DDR_SDTMR1_RCD_SHIFT	19
+#define DV_DDR_SDTMR1_WR_SHIFT	16
+#define DV_DDR_SDTMR1_RAS_SHIFT	11
+#define DV_DDR_SDTMR1_RC_SHIFT	6
+#define DV_DDR_SDTMR1_RRD_SHIFT	3
+#define DV_DDR_SDTMR1_WTR_SHIFT	0
+
+#define DV_DDR_SDTMR2_RASMAX_SHIFT	27
+#define DV_DDR_SDTMR2_XP_SHIFT	25
+#define DV_DDR_SDTMR2_ODT_SHIFT	23
+#define DV_DDR_SDTMR2_XSNR_SHIFT	16
+#define DV_DDR_SDTMR2_XSRD_SHIFT	8
+#define DV_DDR_SDTMR2_RTP_SHIFT	5
+#define DV_DDR_SDTMR2_CKE_SHIFT	0
+
+#define DV_DDR_SDCR_DDR2TERM1_SHIFT	27
+#define DV_DDR_SDCR_IBANK_POS_SHIFT	26
+#define DV_DDR_SDCR_MSDRAMEN_SHIFT	25
+#define DV_DDR_SDCR_DDRDRIVE1_SHIFT	24
+#define DV_DDR_SDCR_BOOTUNLOCK_SHIFT	23
+#define DV_DDR_SDCR_DDR_DDQS_SHIFT	22
+#define DV_DDR_SDCR_DDR2EN_SHIFT	20
+#define DV_DDR_SDCR_DDRDRIVE0_SHIFT	18
+#define DV_DDR_SDCR_DDREN_SHIFT	17
+#define DV_DDR_SDCR_SDRAMEN_SHIFT	16
+#define DV_DDR_SDCR_TIMUNLOCK_SHIFT	15
+#define DV_DDR_SDCR_BUS_WIDTH_SHIFT	14
+#define DV_DDR_SDCR_CL_SHIFT		9
+#define DV_DDR_SDCR_IBANK_SHIFT	4
+#define DV_DDR_SDCR_PAGESIZE_SHIFT	0
+
+#define DV_DDR_SDRCR_LPMODEN	(1 << 31)
+#define DV_DDR_SDRCR_MCLKSTOPEN	(1 << 30)
+
+#define DV_DDR_SRCR_LPMODEN_SHIFT	31
+#define DV_DDR_SRCR_MCLKSTOPEN_SHIFT	30
+
+#define DV_DDR_BOOTUNLOCK	(1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT)
+#define DV_DDR_TIMUNLOCK	(1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT)
+
+#define dv_ddr2_regs_ctrl \
+	((struct dv_ddr2_regs_ctrl *)DAVINCI_DDR_EMIF_CTRL_BASE)
+
+#endif /* _DV_DDR2_DEFS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h
new file mode 100644
index 000000000..eb1488e74
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SoC-specific lowlevel code for tms320dm365 and similar chips
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#ifndef __DM365_LOWLEVEL_H
+#define __DM365_LOWLEVEL_H
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+void dm365_waitloop(unsigned long loopcnt);
+int dm365_pll1_init(unsigned long pllmult, unsigned long prediv);
+int dm365_pll2_init(unsigned long pllm, unsigned long prediv);
+int dm365_ddr_setup(void);
+void dm365_psc_init(void);
+void dm365_pinmux_ctl(unsigned long offset, unsigned long mask,
+	unsigned long value);
+void dm36x_lowlevel_init(ulong bootflag);
+
+#endif /* #ifndef __DM365_LOWLEVEL_H */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/emac_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/emac_defs.h
new file mode 100644
index 000000000..7c6c19ba0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/emac_defs.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ */
+
+#ifndef _DM644X_EMAC_H_
+#define _DM644X_EMAC_H_
+
+#include <asm/arch/hardware.h>
+
+#define EMAC_BASE_ADDR			DAVINCI_EMAC_CNTRL_REGS_BASE
+#define EMAC_WRAPPER_BASE_ADDR		DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE
+#define EMAC_WRAPPER_RAM_ADDR		DAVINCI_EMAC_WRAPPER_RAM_BASE
+#define EMAC_MDIO_BASE_ADDR		DAVINCI_MDIO_CNTRL_REGS_BASE
+#define DAVINCI_EMAC_VERSION2
+
+/* MDIO module input frequency */
+#define EMAC_MDIO_BUS_FREQ		clk_get(DAVINCI_MDIO_CLKID)
+/* MDIO clock output frequency */
+#define EMAC_MDIO_CLOCK_FREQ		2000000		/* 2.0 MHz */
+
+#endif  /* _DM644X_EMAC_H_ */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/gpio.h
new file mode 100644
index 000000000..e5a405341
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/gpio.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ */
+#ifndef _GPIO_DEFS_H_
+#define _GPIO_DEFS_H_
+
+#define DAVINCI_GPIO_BINTEN	0x01E26008
+#define DAVINCI_GPIO_BANK01	0x01E26010
+#define DAVINCI_GPIO_BANK23	0x01E26038
+#define DAVINCI_GPIO_BANK45	0x01E26060
+#define DAVINCI_GPIO_BANK67	0x01E26088
+#define DAVINCI_GPIO_BANK8	0x01E260B0
+
+#define davinci_gpio_bank01 ((struct davinci_gpio *)DAVINCI_GPIO_BANK01)
+#define davinci_gpio_bank23 ((struct davinci_gpio *)DAVINCI_GPIO_BANK23)
+#define davinci_gpio_bank45 ((struct davinci_gpio *)DAVINCI_GPIO_BANK45)
+#define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
+#define davinci_gpio_bank8 ((struct davinci_gpio *)DAVINCI_GPIO_BANK8)
+
+#if !CONFIG_IS_ENABLED(DM_GPIO)
+#define gpio_status()		gpio_info()
+#endif
+#define GPIO_NAME_SIZE		20
+#define MAX_NUM_GPIOS		144
+#define GPIO_BANK(gp)		(davinci_gpio_bank01 + ((gp) >> 5))
+
+void gpio_info(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/hardware.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/hardware.h
new file mode 100644
index 000000000..4466c6c1d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/hardware.h
@@ -0,0 +1,415 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * -------------------------------------------------------------------------
+ *
+ *  linux/include/asm-arm/arch-davinci/hardware.h
+ *
+ *  Copyright (C) 2006 Texas Instruments.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/sizes.h>
+
+#define	REG(addr)	(*(volatile unsigned int *)(addr))
+#define REG_P(addr)	((volatile unsigned int *)(addr))
+
+#ifndef __ASSEMBLY__
+typedef volatile unsigned int	dv_reg;
+typedef volatile unsigned int *	dv_reg_p;
+#endif
+
+#define DAVINCI_UART0_BASE			0x01c42000
+#define DAVINCI_UART1_BASE			0x01d0c000
+#define DAVINCI_UART2_BASE			0x01d0d000
+#define DAVINCI_I2C0_BASE			0x01c22000
+#define DAVINCI_I2C1_BASE			0x01e28000
+#define DAVINCI_TIMER0_BASE			0x01c20000
+#define DAVINCI_TIMER1_BASE			0x01c21000
+#define DAVINCI_WDOG_BASE			0x01c21000
+#define DAVINCI_RTC_BASE			0x01c23000
+#define DAVINCI_PLL_CNTRL0_BASE			0x01c11000
+#define DAVINCI_PLL_CNTRL1_BASE			0x01e1a000
+#define DAVINCI_PSC0_BASE			0x01c10000
+#define DAVINCI_PSC1_BASE			0x01e27000
+#define DAVINCI_SPI0_BASE			0x01c41000
+#define DAVINCI_USB_OTG_BASE			0x01e00000
+#define DAVINCI_SPI1_BASE			(cpu_is_da830() ? \
+						0x01e12000 : 0x01f0e000)
+#define DAVINCI_GPIO_BASE			0x01e26000
+#define DAVINCI_EMAC_CNTRL_REGS_BASE		0x01e23000
+#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE	0x01e22000
+#define DAVINCI_EMAC_WRAPPER_RAM_BASE		0x01e20000
+#define DAVINCI_MDIO_CNTRL_REGS_BASE		0x01e24000
+#define DAVINCI_SYSCFG1_BASE			0x01e2c000
+#define DAVINCI_MMC_SD0_BASE			0x01c40000
+#define DAVINCI_MMC_SD1_BASE			0x01e1b000
+#define DAVINCI_TIMER2_BASE			0x01f0c000
+#define DAVINCI_TIMER3_BASE			0x01f0d000
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE		0x68000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x40000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE	0x60000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE	0x62000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE4_BASE	0x64000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE5_BASE	0x66000000
+#define DAVINCI_DDR_EMIF_CTRL_BASE		0xb0000000
+#define DAVINCI_DDR_EMIF_DATA_BASE		0xc0000000
+#define DAVINCI_INTC_BASE			0xfffee000
+#define DAVINCI_BOOTCFG_BASE			0x01c14000
+#define DAVINCI_LCD_CNTL_BASE			0x01e13000
+#define DAVINCI_L3CBARAM_BASE			0x80000000
+#define JTAG_ID_REG                            (DAVINCI_BOOTCFG_BASE + 0x18)
+#define CHIP_REV_ID_REG				(DAVINCI_BOOTCFG_BASE + 0x24)
+#define HOST1CFG				(DAVINCI_BOOTCFG_BASE + 0x44)
+#define PSC0_MDCTL				(DAVINCI_PSC0_BASE + 0xa00)
+
+#define GPIO_BANK0_REG_DIR_ADDR			(DAVINCI_GPIO_BASE + 0x10)
+#define GPIO_BANK0_REG_OPDATA_ADDR		(DAVINCI_GPIO_BASE + 0x14)
+#define GPIO_BANK0_REG_SET_ADDR			(DAVINCI_GPIO_BASE + 0x18)
+#define GPIO_BANK0_REG_CLR_ADDR			(DAVINCI_GPIO_BASE + 0x1c)
+#define GPIO_BANK2_REG_DIR_ADDR			(DAVINCI_GPIO_BASE + 0x38)
+#define GPIO_BANK2_REG_OPDATA_ADDR		(DAVINCI_GPIO_BASE + 0x3c)
+#define GPIO_BANK2_REG_SET_ADDR			(DAVINCI_GPIO_BASE + 0x40)
+#define GPIO_BANK2_REG_CLR_ADDR			(DAVINCI_GPIO_BASE + 0x44)
+#define GPIO_BANK6_REG_DIR_ADDR			(DAVINCI_GPIO_BASE + 0x88)
+#define GPIO_BANK6_REG_OPDATA_ADDR		(DAVINCI_GPIO_BASE + 0x8c)
+#define GPIO_BANK6_REG_SET_ADDR			(DAVINCI_GPIO_BASE + 0x90)
+#define GPIO_BANK6_REG_CLR_ADDR			(DAVINCI_GPIO_BASE + 0x94)
+
+/* Power and Sleep Controller (PSC) Domains */
+#define DAVINCI_GPSC_ARMDOMAIN		0
+#define DAVINCI_GPSC_DSPDOMAIN		1
+
+#define DAVINCI_LPSC_TPCC		0
+#define DAVINCI_LPSC_TPTC0		1
+#define DAVINCI_LPSC_TPTC1		2
+#define DAVINCI_LPSC_AEMIF		3
+#define DAVINCI_LPSC_SPI0		4
+#define DAVINCI_LPSC_MMC_SD		5
+#define DAVINCI_LPSC_AINTC		6
+#define DAVINCI_LPSC_ARM_RAM_ROM	7
+#define DAVINCI_LPSC_SECCTL_KEYMGR	8
+#define DAVINCI_LPSC_UART0		9
+#define DAVINCI_LPSC_SCR0		10
+#define DAVINCI_LPSC_SCR1		11
+#define DAVINCI_LPSC_SCR2		12
+#define DAVINCI_LPSC_DMAX		13
+#define DAVINCI_LPSC_ARM		14
+#define DAVINCI_LPSC_GEM		15
+
+/* for LPSCs in PSC1, offset from 32 for differentiation */
+#define DAVINCI_LPSC_PSC1_BASE		32
+#define DAVINCI_LPSC_USB20		(DAVINCI_LPSC_PSC1_BASE + 1)
+#define DAVINCI_LPSC_USB11		(DAVINCI_LPSC_PSC1_BASE + 2)
+#define DAVINCI_LPSC_GPIO		(DAVINCI_LPSC_PSC1_BASE + 3)
+#define DAVINCI_LPSC_UHPI		(DAVINCI_LPSC_PSC1_BASE + 4)
+#define DAVINCI_LPSC_EMAC		(DAVINCI_LPSC_PSC1_BASE + 5)
+#define DAVINCI_LPSC_DDR_EMIF		(DAVINCI_LPSC_PSC1_BASE + 6)
+#define DAVINCI_LPSC_McASP0		(DAVINCI_LPSC_PSC1_BASE + 7)
+#define DAVINCI_LPSC_SPI1		(DAVINCI_LPSC_PSC1_BASE + 10)
+#define DAVINCI_LPSC_I2C1		(DAVINCI_LPSC_PSC1_BASE + 11)
+#define DAVINCI_LPSC_UART1		(DAVINCI_LPSC_PSC1_BASE + 12)
+#define DAVINCI_LPSC_UART2		(DAVINCI_LPSC_PSC1_BASE + 13)
+#define DAVINCI_LPSC_LCDC		(DAVINCI_LPSC_PSC1_BASE + 16)
+#define DAVINCI_LPSC_ePWM		(DAVINCI_LPSC_PSC1_BASE + 17)
+#define DAVINCI_LPSC_MMCSD1		(DAVINCI_LPSC_PSC1_BASE + 18)
+#define DAVINCI_LPSC_eCAP		(DAVINCI_LPSC_PSC1_BASE + 20)
+#define DAVINCI_LPSC_L3_CBA_RAM		(DAVINCI_LPSC_PSC1_BASE + 31)
+
+/* DA830-specific peripherals */
+#define DAVINCI_LPSC_McASP1		(DAVINCI_LPSC_PSC1_BASE + 8)
+#define DAVINCI_LPSC_McASP2		(DAVINCI_LPSC_PSC1_BASE + 9)
+#define DAVINCI_LPSC_eQEP		(DAVINCI_LPSC_PSC1_BASE + 21)
+#define DAVINCI_LPSC_SCR8		(DAVINCI_LPSC_PSC1_BASE + 24)
+#define DAVINCI_LPSC_SCR7		(DAVINCI_LPSC_PSC1_BASE + 25)
+#define DAVINCI_LPSC_SCR12		(DAVINCI_LPSC_PSC1_BASE + 26)
+
+/* DA850-specific peripherals */
+#define DAVINCI_LPSC_TPCC1		(DAVINCI_LPSC_PSC1_BASE + 0)
+#define DAVINCI_LPSC_SATA		(DAVINCI_LPSC_PSC1_BASE + 8)
+#define DAVINCI_LPSC_VPIF		(DAVINCI_LPSC_PSC1_BASE + 9)
+#define DAVINCI_LPSC_McBSP0		(DAVINCI_LPSC_PSC1_BASE + 14)
+#define DAVINCI_LPSC_McBSP1		(DAVINCI_LPSC_PSC1_BASE + 15)
+#define DAVINCI_LPSC_MMC_SD1		(DAVINCI_LPSC_PSC1_BASE + 18)
+#define DAVINCI_LPSC_uPP		(DAVINCI_LPSC_PSC1_BASE + 19)
+#define DAVINCI_LPSC_TPTC2		(DAVINCI_LPSC_PSC1_BASE + 21)
+#define DAVINCI_LPSC_SCR_F0		(DAVINCI_LPSC_PSC1_BASE + 24)
+#define DAVINCI_LPSC_SCR_F1		(DAVINCI_LPSC_PSC1_BASE + 25)
+#define DAVINCI_LPSC_SCR_F2		(DAVINCI_LPSC_PSC1_BASE + 26)
+#define DAVINCI_LPSC_SCR_F6		(DAVINCI_LPSC_PSC1_BASE + 27)
+#define DAVINCI_LPSC_SCR_F7		(DAVINCI_LPSC_PSC1_BASE + 28)
+#define DAVINCI_LPSC_SCR_F8		(DAVINCI_LPSC_PSC1_BASE + 29)
+#define DAVINCI_LPSC_BR_F7		(DAVINCI_LPSC_PSC1_BASE + 30)
+
+#ifndef __ASSEMBLY__
+void lpsc_on(unsigned int id);
+void lpsc_syncreset(unsigned int id);
+void lpsc_disable(unsigned int id);
+void dsp_on(void);
+
+void davinci_enable_uart0(void);
+void davinci_enable_emac(void);
+void davinci_enable_i2c(void);
+void davinci_errata_workarounds(void);
+
+#define	PSC_ENABLE		0x3
+#define	PSC_DISABLE		0x2
+#define	PSC_SYNCRESET		0x1
+#define	PSC_SWRSTDISABLE	0x0
+
+#define PSC_PSC0_MODULE_ID_CNT		16
+#define PSC_PSC1_MODULE_ID_CNT		32
+
+#define UART0_PWREMU_MGMT		(0x01c42030)
+
+struct davinci_psc_regs {
+	dv_reg	revid;
+	dv_reg	rsvd0[71];
+	dv_reg	ptcmd;
+	dv_reg	rsvd1;
+	dv_reg	ptstat;
+	dv_reg	rsvd2[437];
+	union {
+		struct {
+			dv_reg	mdstat[PSC_PSC0_MODULE_ID_CNT];
+			dv_reg	rsvd3[112];
+			dv_reg	mdctl[PSC_PSC0_MODULE_ID_CNT];
+		} psc0;
+		struct {
+			dv_reg	mdstat[PSC_PSC1_MODULE_ID_CNT];
+			dv_reg	rsvd3[96];
+			dv_reg	mdctl[PSC_PSC1_MODULE_ID_CNT];
+		} psc1;
+	};
+};
+
+#define davinci_psc0_regs ((struct davinci_psc_regs *)DAVINCI_PSC0_BASE)
+#define davinci_psc1_regs ((struct davinci_psc_regs *)DAVINCI_PSC1_BASE)
+
+#define PSC_MDSTAT_STATE		0x3f
+#define PSC_MDCTL_NEXT			0x07
+
+struct davinci_pllc_regs {
+	dv_reg	revid;
+	dv_reg	rsvd1[56];
+	dv_reg	rstype;
+	dv_reg	rsvd2[6];
+	dv_reg	pllctl;
+	dv_reg	ocsel;
+	dv_reg	rsvd3[2];
+	dv_reg	pllm;
+	dv_reg	prediv;
+	dv_reg	plldiv1;
+	dv_reg	plldiv2;
+	dv_reg	plldiv3;
+	dv_reg	oscdiv;
+	dv_reg	postdiv;
+	dv_reg	rsvd4[3];
+	dv_reg	pllcmd;
+	dv_reg	pllstat;
+	dv_reg	alnctl;
+	dv_reg	dchange;
+	dv_reg	cken;
+	dv_reg	ckstat;
+	dv_reg	systat;
+	dv_reg	rsvd5[3];
+	dv_reg	plldiv4;
+	dv_reg	plldiv5;
+	dv_reg	plldiv6;
+	dv_reg	plldiv7;
+	dv_reg	rsvd6[32];
+	dv_reg	emucnt0;
+	dv_reg	emucnt1;
+};
+
+#define davinci_pllc0_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL0_BASE)
+#define davinci_pllc1_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL1_BASE)
+#define DAVINCI_PLLC_DIV_MASK	0x1f
+
+/*
+ * A clock ID is a 32-bit number where bit 16 represents the PLL controller
+ * (clear is PLLC0, set is PLLC1) and the low 16 bits represent the divisor,
+ * counting from 1. Clock IDs may be passed to clk_get().
+ */
+
+/* flags to select PLL controller */
+#define DAVINCI_PLLC0_FLAG			(0)
+#define DAVINCI_PLLC1_FLAG			(1 << 16)
+
+enum davinci_clk_ids {
+	/*
+	 * Clock IDs for PLL outputs. Each may be switched on/off
+	 * independently, and each may map to one or more peripherals.
+	 */
+	DAVINCI_PLL0_SYSCLK2			= DAVINCI_PLLC0_FLAG | 2,
+	DAVINCI_PLL0_SYSCLK4			= DAVINCI_PLLC0_FLAG | 4,
+	DAVINCI_PLL0_SYSCLK6			= DAVINCI_PLLC0_FLAG | 6,
+	DAVINCI_PLL1_SYSCLK1			= DAVINCI_PLLC1_FLAG | 1,
+	DAVINCI_PLL1_SYSCLK2			= DAVINCI_PLLC1_FLAG | 2,
+
+	/* map peripherals to clock IDs */
+	DAVINCI_ARM_CLKID			= DAVINCI_PLL0_SYSCLK6,
+	DAVINCI_DDR_CLKID			= DAVINCI_PLL1_SYSCLK1,
+	DAVINCI_MDIO_CLKID			= DAVINCI_PLL0_SYSCLK4,
+	DAVINCI_MMC_CLKID			= DAVINCI_PLL0_SYSCLK2,
+	DAVINCI_SPI0_CLKID			= DAVINCI_PLL0_SYSCLK2,
+	DAVINCI_MMCSD_CLKID			= DAVINCI_PLL0_SYSCLK2,
+
+	/* special clock ID - output of PLL multiplier */
+	DAVINCI_PLLM_CLKID			= 0x0FF,
+
+	/* special clock ID - output of PLL post divisor */
+	DAVINCI_PLLC_CLKID			= 0x100,
+
+	/* special clock ID - PLL bypass */
+	DAVINCI_AUXCLK_CLKID			= 0x101,
+};
+
+#define DAVINCI_UART2_CLKID	(cpu_is_da830() ? DAVINCI_PLL0_SYSCLK2 \
+						: get_async3_src())
+
+#define DAVINCI_SPI1_CLKID	(cpu_is_da830() ? DAVINCI_PLL0_SYSCLK2 \
+						: get_async3_src())
+
+int clk_get(enum davinci_clk_ids id);
+
+/* Boot config */
+struct davinci_syscfg_regs {
+	dv_reg	revid;
+	dv_reg	rsvd[7];
+	dv_reg	bootcfg;
+	dv_reg	chiprevidr;
+	dv_reg	rsvd2[4];
+	dv_reg	kick0;
+	dv_reg	kick1;
+	dv_reg	rsvd1[52];
+	dv_reg	mstpri[3];
+	dv_reg  rsvd3;
+	dv_reg	pinmux[20];
+	dv_reg	suspsrc;
+	dv_reg	chipsig;
+	dv_reg	chipsig_clr;
+	dv_reg	cfgchip0;
+	dv_reg	cfgchip1;
+	dv_reg	cfgchip2;
+	dv_reg	cfgchip3;
+	dv_reg	cfgchip4;
+};
+
+#define davinci_syscfg_regs \
+	((struct davinci_syscfg_regs *)DAVINCI_BOOTCFG_BASE)
+
+enum {
+	DAVINCI_NAND8_BOOT	= 0b001110,
+	DAVINCI_NAND16_BOOT	= 0b010000,
+	DAVINCI_SD_OR_MMC_BOOT	= 0b011100,
+	DAVINCI_MMC_ONLY_BOOT	= 0b111100,
+	DAVINCI_SPI0_FLASH_BOOT	= 0b001010,
+	DAVINCI_SPI1_FLASH_BOOT	= 0b001100,
+};
+
+#define pinmux(x)	(&davinci_syscfg_regs->pinmux[x])
+
+/* Emulation suspend bits */
+#define DAVINCI_SYSCFG_SUSPSRC_EMAC		(1 << 5)
+#define DAVINCI_SYSCFG_SUSPSRC_I2C		(1 << 16)
+#define DAVINCI_SYSCFG_SUSPSRC_SPI0		(1 << 21)
+#define DAVINCI_SYSCFG_SUSPSRC_SPI1		(1 << 22)
+#define DAVINCI_SYSCFG_SUSPSRC_UART0		(1 << 18)
+#define DAVINCI_SYSCFG_SUSPSRC_UART1		(1 << 19)
+#define DAVINCI_SYSCFG_SUSPSRC_UART2		(1 << 20)
+#define DAVINCI_SYSCFG_SUSPSRC_TIMER0		(1 << 27)
+
+struct davinci_syscfg1_regs {
+	dv_reg	vtpio_ctl;
+	dv_reg	ddr_slew;
+	dv_reg	deepsleep;
+	dv_reg	pupd_ena;
+	dv_reg	pupd_sel;
+	dv_reg	rxactive;
+	dv_reg	pwrdwn;
+};
+
+#define davinci_syscfg1_regs \
+	((struct davinci_syscfg1_regs *)DAVINCI_SYSCFG1_BASE)
+
+#define DDR_SLEW_CMOSEN_BIT	4
+#define DDR_SLEW_DDR_PDENA_BIT	5
+
+#define VTP_POWERDWN		(1 << 6)
+#define VTP_LOCK		(1 << 7)
+#define VTP_CLKRZ		(1 << 13)
+#define VTP_READY		(1 << 15)
+#define VTP_IOPWRDWN		(1 << 14)
+
+#define DV_SYSCFG_KICK0_UNLOCK	0x83e70b13
+#define DV_SYSCFG_KICK1_UNLOCK	0x95a4f1e0
+
+/* Interrupt controller */
+struct davinci_aintc_regs {
+	dv_reg	revid;
+	dv_reg	cr;
+	dv_reg	dummy0[2];
+	dv_reg	ger;
+	dv_reg	dummy1[219];
+	dv_reg	ecr1;
+	dv_reg	ecr2;
+	dv_reg	ecr3;
+	dv_reg	dummy2[1117];
+	dv_reg	hier;
+};
+
+#define davinci_aintc_regs ((struct davinci_aintc_regs *)DAVINCI_INTC_BASE)
+
+struct davinci_uart_ctrl_regs {
+	dv_reg	revid1;
+	dv_reg	revid2;
+	dv_reg	pwremu_mgmt;
+	dv_reg	mdr;
+};
+
+#define DAVINCI_UART_CTRL_BASE 0x28
+#define DAVINCI_UART0_CTRL_ADDR (DAVINCI_UART0_BASE + DAVINCI_UART_CTRL_BASE)
+#define DAVINCI_UART1_CTRL_ADDR (DAVINCI_UART1_BASE + DAVINCI_UART_CTRL_BASE)
+#define DAVINCI_UART2_CTRL_ADDR (DAVINCI_UART2_BASE + DAVINCI_UART_CTRL_BASE)
+
+#define davinci_uart0_ctrl_regs \
+	((struct davinci_uart_ctrl_regs *)DAVINCI_UART0_CTRL_ADDR)
+#define davinci_uart1_ctrl_regs \
+	((struct davinci_uart_ctrl_regs *)DAVINCI_UART1_CTRL_ADDR)
+#define davinci_uart2_ctrl_regs \
+	((struct davinci_uart_ctrl_regs *)DAVINCI_UART2_CTRL_ADDR)
+
+/* UART PWREMU_MGMT definitions */
+#define DAVINCI_UART_PWREMU_MGMT_FREE	(1 << 0)
+#define DAVINCI_UART_PWREMU_MGMT_URRST	(1 << 13)
+#define DAVINCI_UART_PWREMU_MGMT_UTRST	(1 << 14)
+
+static inline int cpu_is_da830(void)
+{
+	unsigned int jtag_id	= REG(JTAG_ID_REG);
+	unsigned short part_no	= (jtag_id >> 12) & 0xffff;
+
+	return ((part_no == 0xb7df) ? 1 : 0);
+}
+static inline int cpu_is_da850(void)
+{
+	unsigned int jtag_id    = REG(JTAG_ID_REG);
+	unsigned short part_no  = (jtag_id >> 12) & 0xffff;
+
+	return ((part_no == 0xb7d1) ? 1 : 0);
+}
+
+static inline enum davinci_clk_ids get_async3_src(void)
+{
+	return (REG(&davinci_syscfg_regs->cfgchip3) & 0x10) ?
+			DAVINCI_PLL1_SYSCLK2 : DAVINCI_PLL0_SYSCLK2;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/i2c_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/i2c_defs.h
new file mode 100644
index 000000000..f12460dd5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/i2c_defs.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2004-2014
+ * Texas Instruments, <www.ti.com>
+ *
+ * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ */
+#ifndef _I2C_DEFS_H_
+#define _I2C_DEFS_H_
+
+#define I2C_BASE		0x01c22000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/pinmux_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/pinmux_defs.h
new file mode 100644
index 000000000..4901ba49c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/pinmux_defs.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Pinmux configurations for the DAxxx SoCs
+ *
+ * Copyright (C) 2011 OMICRON electronics GmbH
+ */
+
+#ifndef __ASM_ARCH_PINMUX_DEFS_H
+#define __ASM_ARCH_PINMUX_DEFS_H
+
+#include <asm/arch/davinci_misc.h>
+#include <config.h>
+
+/* SPI0 pin muxer settings */
+extern const struct pinmux_config spi0_pins_base[3];
+extern const struct pinmux_config spi0_pins_scs0[1];
+extern const struct pinmux_config spi0_pins_ena[1];
+
+/* SPI1 pin muxer settings */
+extern const struct pinmux_config spi1_pins_base[3];
+extern const struct pinmux_config spi1_pins_scs0[1];
+
+/* UART pin muxer settings */
+extern const struct pinmux_config uart0_pins_txrx[2];
+extern const struct pinmux_config uart0_pins_rtscts[2];
+extern const struct pinmux_config uart1_pins_txrx[2];
+extern const struct pinmux_config uart2_pins_txrx[2];
+extern const struct pinmux_config uart2_pins_rtscts[2];
+
+/* EMAC pin muxer settings*/
+extern const struct pinmux_config emac_pins_rmii[8];
+extern const struct pinmux_config emac_pins_rmii_clk_source[1];
+extern const struct pinmux_config emac_pins_mii[15];
+extern const struct pinmux_config emac_pins_mdio[2];
+
+/* I2C pin muxer settings */
+extern const struct pinmux_config i2c0_pins[2];
+extern const struct pinmux_config i2c1_pins[2];
+
+/* EMIFA pin muxer settings */
+extern const struct pinmux_config emifa_pins[40];
+extern const struct pinmux_config emifa_pins_cs0[1];
+extern const struct pinmux_config emifa_pins_cs2[1];
+extern const struct pinmux_config emifa_pins_cs3[1];
+extern const struct pinmux_config emifa_pins_cs4[1];
+extern const struct pinmux_config emifa_pins_nand[12];
+extern const struct pinmux_config emifa_pins_nor[43];
+
+/* USB pin mux setting */
+extern const struct pinmux_config usb_pins[1];
+
+/* MMC pin muxer settings */
+extern const struct pinmux_config mmc0_pins_8bit[10];
+extern const struct pinmux_config mmc0_pins[6];
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/pll_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/pll_defs.h
new file mode 100644
index 000000000..e38fafd7c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/pll_defs.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#ifndef _DV_PLL_DEFS_H_
+#define _DV_PLL_DEFS_H_
+
+struct dv_pll_regs {
+	unsigned int	pid;		/* 0x00 */
+	unsigned char	rsvd0[224];	/* 0x04 */
+	unsigned int	rstype;		/* 0xe4 */
+	unsigned char	rsvd1[24];	/* 0xe8 */
+	unsigned int	pllctl;		/* 0x100 */
+	unsigned char	rsvd2[4];	/* 0x104 */
+	unsigned int	secctl;		/* 0x108 */
+	unsigned int	rv;		/* 0x10c */
+	unsigned int	pllm;		/* 0x110 */
+	unsigned int	prediv;		/* 0x114 */
+	unsigned int	plldiv1;	/* 0x118 */
+	unsigned int	plldiv2;	/* 0x11c */
+	unsigned int	plldiv3;	/* 0x120 */
+	unsigned int	oscdiv1;	/* 0x124 */
+	unsigned int	postdiv;	/* 0x128 */
+	unsigned int	bpdiv;		/* 0x12c */
+	unsigned char	rsvd5[8];	/* 0x130 */
+	unsigned int	pllcmd;		/* 0x138 */
+	unsigned int	pllstat;	/* 0x13c */
+	unsigned int	alnctl;		/* 0x140 */
+	unsigned int	dchange;	/* 0x144 */
+	unsigned int	cken;		/* 0x148 */
+	unsigned int	ckstat;		/* 0x14c */
+	unsigned int	systat;		/* 0x150 */
+	unsigned char	rsvd6[12];	/* 0x154 */
+	unsigned int	plldiv4;	/* 0x160 */
+	unsigned int	plldiv5;	/* 0x164 */
+	unsigned int	plldiv6;	/* 0x168 */
+	unsigned int	plldiv7;	/* 0x16C */
+	unsigned int	plldiv8;	/* 0x170 */
+	unsigned int	plldiv9;	/* 0x174 */
+};
+
+#define PLL_MASTER_LOCK	(1 << 4)
+
+#define PLLCTL_CLOCK_MODE_SHIFT	8
+#define PLLCTL_PLLEN	(1 << 0)
+#define PLLCTL_PLLPWRDN	(1 << 1)
+#define PLLCTL_PLLRST	(1 << 3)
+#define PLLCTL_PLLDIS	(1 << 4)
+#define PLLCTL_PLLENSRC	(1 << 5)
+#define PLLCTL_RES_9	(1 << 8)
+#define PLLCTL_EXTCLKSRC	(1 << 9)
+
+#define PLL_DIVEN	(1 << 15)
+#define PLL_POSTDEN	PLL_DIVEN
+
+#define PLL_SCSCFG3_DIV45PENA	(1 << 2)
+#define PLL_SCSCFG3_EMA_CLKSRC	(1 << 1)
+
+#define PLL_RSTYPE_POR		(1 << 0)
+#define PLL_RSTYPE_XWRST	(1 << 1)
+
+#define PLLSECCTL_TINITZ	(1 << 16)
+#define PLLSECCTL_TENABLE	(1 << 17)
+#define PLLSECCTL_TENABLEDIV	(1 << 18)
+#define PLLSECCTL_STOPMODE	(1 << 22)
+
+#define PLLCMD_GOSET		(1 << 0)
+#define PLLCMD_GOSTAT		(1 << 0)
+
+#define PLL0_LOCK		0x07000000
+#define PLL1_LOCK		0x07000000
+
+#define dv_pll0_regs ((struct dv_pll_regs *)DAVINCI_PLL_CNTRL0_BASE)
+#define dv_pll1_regs ((struct dv_pll_regs *)DAVINCI_PLL_CNTRL1_BASE)
+
+#define ARM_PLLDIV	(offsetof(struct dv_pll_regs, plldiv2))
+#define DDR_PLLDIV	(offsetof(struct dv_pll_regs, plldiv7))
+#define SPI_PLLDIV	(offsetof(struct dv_pll_regs, plldiv4))
+
+unsigned int davinci_clk_get(unsigned int div);
+#endif /* _DV_PLL_DEFS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/psc_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/psc_defs.h
new file mode 100644
index 000000000..582e6f23d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/psc_defs.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#ifndef _DV_PSC_DEFS_H_
+#define _DV_PSC_DEFS_H_
+
+/*
+ * Power/Sleep Ctrl Register structure
+ * See sprufb3.pdf, Chapter 7
+ */
+struct dv_psc_regs {
+	unsigned int	pid;		/* 0x000 */
+	unsigned char	rsvd0[16];	/* 0x004 */
+	unsigned char	rsvd1[4];	/* 0x014 */
+	unsigned int	inteval;	/* 0x018 */
+	unsigned char	rsvd2[36];	/* 0x01C */
+	unsigned int	merrpr0;	/* 0x040 */
+	unsigned int	merrpr1;	/* 0x044 */
+	unsigned char	rsvd3[8];	/* 0x048 */
+	unsigned int	merrcr0;	/* 0x050 */
+	unsigned int	merrcr1;	/* 0x054 */
+	unsigned char	rsvd4[8];	/* 0x058 */
+	unsigned int	perrpr;		/* 0x060 */
+	unsigned char	rsvd5[4];	/* 0x064 */
+	unsigned int	perrcr;		/* 0x068 */
+	unsigned char	rsvd6[4];	/* 0x06C */
+	unsigned int	epcpr;		/* 0x070 */
+	unsigned char	rsvd7[4];	/* 0x074 */
+	unsigned int	epccr;		/* 0x078 */
+	unsigned char	rsvd8[144];	/* 0x07C */
+	unsigned char	rsvd9[20];	/* 0x10C */
+	unsigned int	ptcmd;		/* 0x120 */
+	unsigned char	rsvd10[4];	/* 0x124 */
+	unsigned int	ptstat;		/* 0x128 */
+	unsigned char	rsvd11[212];	/* 0x12C */
+	unsigned int	pdstat0;	/* 0x200 */
+	unsigned int	pdstat1;	/* 0x204 */
+	unsigned char	rsvd12[248];	/* 0x208 */
+	unsigned int	pdctl0;		/* 0x300 */
+	unsigned int	pdctl1;		/* 0x304 */
+	unsigned char	rsvd13[536];	/* 0x308 */
+	unsigned int	mckout0;	/* 0x520 */
+	unsigned int	mckout1;	/* 0x524 */
+	unsigned char	rsvd14[728];	/* 0x528 */
+	unsigned int	mdstat[52];	/* 0x800 */
+	unsigned char	rsvd15[304];	/* 0x8D0 */
+	unsigned int	mdctl[52];	/* 0xA00 */
+};
+
+/* PSC constants */
+#define EMURSTIE_MASK	(0x00000200)
+
+#define PD0		(0)
+
+#define PSC_ENABLE		(0x3)
+#define PSC_DISABLE		(0x2)
+#define PSC_SYNCRESET		(0x1)
+#define PSC_SWRSTDISABLE	(0x0)
+
+#define PSC_GOSTAT		(1 << 0)
+#define PSC_MD_STATE_MSK	(0x1f)
+
+#define PSC_CMD_GO		(1 << 0)
+
+#define dv_psc_regs ((struct dv_psc_regs *)DAVINCI_PWR_SLEEP_CNTRL_BASE)
+
+#endif /* _DV_PSC_DEFS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/sdmmc_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/sdmmc_defs.h
new file mode 100644
index 000000000..d4195cf58
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/sdmmc_defs.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Davinci MMC Controller Defines - Based on Linux davinci_mmc.c
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated
+ */
+
+#ifndef _SDMMC_DEFS_H_
+#define _SDMMC_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+/* MMC Control Reg fields */
+#define MMCCTL_DATRST		(1 << 0)
+#define MMCCTL_CMDRST		(1 << 1)
+#define MMCCTL_WIDTH_4_BIT	(1 << 2)
+#define MMCCTL_DATEG_DISABLED	(0 << 6)
+#define MMCCTL_DATEG_RISING	(1 << 6)
+#define MMCCTL_DATEG_FALLING	(2 << 6)
+#define MMCCTL_DATEG_BOTH	(3 << 6)
+#define MMCCTL_PERMDR_LE	(0 << 9)
+#define MMCCTL_PERMDR_BE	(1 << 9)
+#define MMCCTL_PERMDX_LE	(0 << 10)
+#define MMCCTL_PERMDX_BE	(1 << 10)
+
+/* MMC Clock Control Reg fields */
+#define MMCCLK_CLKEN		(1 << 8)
+#define MMCCLK_CLKRT_MASK	(0xFF << 0)
+
+/* MMC Status Reg0 fields */
+#define MMCST0_DATDNE		(1 << 0)
+#define MMCST0_BSYDNE		(1 << 1)
+#define MMCST0_RSPDNE		(1 << 2)
+#define MMCST0_TOUTRD		(1 << 3)
+#define MMCST0_TOUTRS		(1 << 4)
+#define MMCST0_CRCWR		(1 << 5)
+#define MMCST0_CRCRD		(1 << 6)
+#define MMCST0_CRCRS		(1 << 7)
+#define MMCST0_DXRDY		(1 << 9)
+#define MMCST0_DRRDY		(1 << 10)
+#define MMCST0_DATED		(1 << 11)
+#define MMCST0_TRNDNE		(1 << 12)
+
+#define MMCST0_ERR_MASK		(0x00F8)
+
+/* MMC Status Reg1 fields */
+#define MMCST1_BUSY		(1 << 0)
+#define MMCST1_CLKSTP		(1 << 1)
+#define MMCST1_DXEMP		(1 << 2)
+#define MMCST1_DRFUL		(1 << 3)
+#define MMCST1_DAT3ST		(1 << 4)
+#define MMCST1_FIFOEMP		(1 << 5)
+#define MMCST1_FIFOFUL		(1 << 6)
+
+/* MMC INT Mask Reg fields */
+#define MMCIM_EDATDNE		(1 << 0)
+#define MMCIM_EBSYDNE		(1 << 1)
+#define MMCIM_ERSPDNE		(1 << 2)
+#define MMCIM_ETOUTRD		(1 << 3)
+#define MMCIM_ETOUTRS		(1 << 4)
+#define MMCIM_ECRCWR		(1 << 5)
+#define MMCIM_ECRCRD		(1 << 6)
+#define MMCIM_ECRCRS		(1 << 7)
+#define MMCIM_EDXRDY		(1 << 9)
+#define MMCIM_EDRRDY		(1 << 10)
+#define MMCIM_EDATED		(1 << 11)
+#define MMCIM_ETRNDNE		(1 << 12)
+
+#define MMCIM_MASKALL		(0xFFFFFFFF)
+
+/* MMC Resp Tout Reg fields */
+#define MMCTOR_TOR_MASK		(0xFF)		/* dont write to reg, | it */
+#define MMCTOR_TOD_20_16_SHIFT  (8)
+
+/* MMC Data Read Tout Reg fields */
+#define MMCTOD_TOD_0_15_MASK	(0xFFFF)
+
+/* MMC Block len Reg fields */
+#define MMCBLEN_BLEN_MASK	(0xFFF)
+
+/* MMC Num Blocks Reg fields */
+#define MMCNBLK_NBLK_MASK	(0xFFFF)
+#define MMCNBLK_NBLK_MAX	(0xFFFF)
+
+/* MMC Num Blocks Counter Reg fields */
+#define MMCNBLC_NBLC_MASK	(0xFFFF)
+
+/* MMC Cmd Reg fields */
+#define MMCCMD_CMD_MASK		(0x3F)
+#define MMCCMD_PPLEN		(1 << 7)
+#define MMCCMD_BSYEXP		(1 << 8)
+#define MMCCMD_RSPFMT_NONE	(0 << 9)
+#define MMCCMD_RSPFMT_R1567	(1 << 9)
+#define MMCCMD_RSPFMT_R2	(2 << 9)
+#define MMCCMD_RSPFMT_R3	(3 << 9)
+#define MMCCMD_DTRW		(1 << 11)
+#define MMCCMD_STRMTP		(1 << 12)
+#define MMCCMD_WDATX		(1 << 13)
+#define MMCCMD_INITCK		(1 << 14)
+#define MMCCMD_DCLR		(1 << 15)
+#define MMCCMD_DMATRIG		(1 << 16)
+
+/* FIFO control Reg fields */
+#define MMCFIFOCTL_FIFORST	(1 << 0)
+#define MMCFIFOCTL_FIFODIR	(1 << 1)
+#define MMCFIFOCTL_FIFOLEV	(1 << 2)
+#define MMCFIFOCTL_ACCWD_4	(0 << 3)	/* access width of 4 bytes */
+#define MMCFIFOCTL_ACCWD_3	(1 << 3)	/* access width of 3 bytes */
+#define MMCFIFOCTL_ACCWD_2	(2 << 3)	/* access width of 2 bytes */
+#define MMCFIFOCTL_ACCWD_1	(3 << 3)	/* access width of 1 byte */
+
+/* Davinci MMC Register definitions */
+struct davinci_mmc_regs {
+	dv_reg mmcctl;
+	dv_reg mmcclk;
+	dv_reg mmcst0;
+	dv_reg mmcst1;
+	dv_reg mmcim;
+	dv_reg mmctor;
+	dv_reg mmctod;
+	dv_reg mmcblen;
+	dv_reg mmcnblk;
+	dv_reg mmcnblc;
+	dv_reg mmcdrr;
+	dv_reg mmcdxr;
+	dv_reg mmccmd;
+	dv_reg mmcarghl;
+	dv_reg mmcrsp01;
+	dv_reg mmcrsp23;
+	dv_reg mmcrsp45;
+	dv_reg mmcrsp67;
+	dv_reg mmcdrsp;
+	dv_reg mmcetok;
+	dv_reg mmccidx;
+	dv_reg mmcckc;
+	dv_reg mmctorc;
+	dv_reg mmctodc;
+	dv_reg mmcblnc;
+	dv_reg sdioctl;
+	dv_reg sdiost0;
+	dv_reg sdioien;
+	dv_reg sdioist;
+	dv_reg mmcfifoctl;
+};
+
+/* Davinci MMC board definitions */
+struct davinci_mmc {
+	struct davinci_mmc_regs *reg_base;	/* Register base address */
+	uint input_clk;		/* Input clock to MMC controller */
+	uint host_caps;		/* Host capabilities */
+	uint voltages;		/* Host supported voltages */
+	struct mmc_config cfg;
+};
+
+#define DAVINCI_MAX_BLOCKS	(32)
+struct davinci_mmc_plat {
+	struct davinci_mmc_regs *reg_base;	/* Register base address */
+	struct mmc_config cfg;
+	struct mmc mmc;
+};
+
+int davinci_mmc_init(struct bd_info *bis, struct davinci_mmc *host);
+
+#endif /* _SDMMC_DEFS_H */
diff --git a/roms/u-boot/arch/arm/mach-davinci/include/mach/timer_defs.h b/roms/u-boot/arch/arm/mach-davinci/include/mach/timer_defs.h
new file mode 100644
index 000000000..110e67e45
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/include/mach/timer_defs.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ */
+#ifndef _TIMER_DEFS_H_
+#define _TIMER_DEFS_H_
+
+struct davinci_timer {
+	u_int32_t	pid12;
+	u_int32_t	emumgt;
+	u_int32_t	na1;
+	u_int32_t	na2;
+	u_int32_t	tim12;
+	u_int32_t	tim34;
+	u_int32_t	prd12;
+	u_int32_t	prd34;
+	u_int32_t	tcr;
+	u_int32_t	tgcr;
+	u_int32_t	wdtcr;
+};
+
+#define DV_TIMER_TCR_ENAMODE_MASK		3
+
+#define DV_TIMER_TCR_ENAMODE12_SHIFT		6
+#define DV_TIMER_TCR_CLKSRC12_SHIFT		8
+#define DV_TIMER_TCR_READRSTMODE12_SHIFT	10
+#define DV_TIMER_TCR_CAPMODE12_SHIFT		11
+#define DV_TIMER_TCR_CAPVTMODE12_SHIFT		12
+#define DV_TIMER_TCR_ENAMODE34_SHIFT		22
+#define DV_TIMER_TCR_CLKSRC34_SHIFT		24
+#define DV_TIMER_TCR_READRSTMODE34_SHIFT	26
+#define DV_TIMER_TCR_CAPMODE34_SHIFT		27
+#define DV_TIMER_TCR_CAPEVTMODE12_SHIFT		28
+
+#define DV_WDT_ENABLE_SYS_RESET		0x00020000
+#define DV_WDT_TRIGGER_SYS_RESET	0x00020002
+
+#ifdef CONFIG_HW_WATCHDOG
+void davinci_hw_watchdog_enable(void);
+void davinci_hw_watchdog_reset(void);
+#endif
+#endif /* _TIMER_DEFS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-davinci/misc.c b/roms/u-boot/arch/arm/mach-davinci/misc.c
new file mode 100644
index 000000000..90b38b7e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/misc.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Miscelaneous DaVinci functions.
+ *
+ * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ */
+
+#include <common.h>
+#include <env.h>
+#include <i2c.h>
+#include <init.h>
+#include <log.h>
+#include <net.h>
+#include <asm/arch/hardware.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/davinci_misc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SPL_BUILD
+int dram_init(void)
+{
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size(
+			(void *)CONFIG_SYS_SDRAM_BASE,
+			CONFIG_MAX_RAM_BANK_SIZE);
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+/*
+ * Read ethernet MAC address from EEPROM for DVEVM compatible boards.
+ * Returns 1 if found, 0 otherwise.
+ */
+int dvevm_read_mac_address(uint8_t *buf)
+{
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
+	/* Read MAC address. */
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00,
+		CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &buf[0], 6))
+		goto i2cerr;
+
+	/* Check that MAC address is valid. */
+	if (!is_valid_ethaddr(buf))
+		goto err;
+
+	return 1; /* Found */
+
+i2cerr:
+	printf("Read from EEPROM @ 0x%02x failed\n",
+		CONFIG_SYS_I2C_EEPROM_ADDR);
+err:
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
+
+	return 0;
+}
+
+/*
+ * Set the mii mode as MII or RMII
+ */
+void davinci_emac_mii_mode_sel(int mode_sel)
+{
+	int val;
+
+	val = readl(&davinci_syscfg_regs->cfgchip3);
+	if (mode_sel == 0)
+		val &= ~(1 << 8);
+	else
+		val |= (1 << 8);
+	writel(val, &davinci_syscfg_regs->cfgchip3);
+}
+
+/*
+ * If there is no MAC address in the environment, then it will be initialized
+ * (silently) from the value in the EEPROM.
+ */
+void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
+{
+	uint8_t env_enetaddr[6];
+	int ret;
+
+	ret = eth_env_get_enetaddr_by_index("eth", 0, env_enetaddr);
+	if (!ret) {
+		/*
+		 * There is no MAC address in the environment, so we
+		 * initialize it from the value in the EEPROM.
+		 */
+		debug("### Setting environment from EEPROM MAC address = "
+			"\"%pM\"\n",
+			env_enetaddr);
+		ret = !eth_env_set_enetaddr("ethaddr", rom_enetaddr);
+	}
+	if (!ret)
+		printf("Failed to set mac address from EEPROM: %d\n", ret);
+}
+#endif	/* CONFIG_DRIVER_TI_EMAC */
+
+void irq_init(void)
+{
+	/*
+	 * Mask all IRQs by clearing the global enable and setting
+	 * the enable clear for all the 90 interrupts.
+	 */
+	writel(0, &davinci_aintc_regs->ger);
+
+	writel(0, &davinci_aintc_regs->hier);
+
+	writel(0xffffffff, &davinci_aintc_regs->ecr1);
+	writel(0xffffffff, &davinci_aintc_regs->ecr2);
+	writel(0xffffffff, &davinci_aintc_regs->ecr3);
+}
+
+/*
+ * Enable PSC for various peripherals.
+ */
+int da8xx_configure_lpsc_items(const struct lpsc_resource *item,
+				    const int n_items)
+{
+	int i;
+
+	for (i = 0; i < n_items; i++)
+		lpsc_on(item[i].lpsc_no);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-davinci/pinmux.c b/roms/u-boot/arch/arm/mach-davinci/pinmux.c
new file mode 100644
index 000000000..7904257b4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/pinmux.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * DaVinci pinmux functions.
+ *
+ * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/davinci_misc.h>
+
+/*
+ * Change the setting of a pin multiplexer field.
+ *
+ * Takes an array of pinmux settings similar to:
+ *
+ * struct pinmux_config uart_pins[] = {
+ *	{ &davinci_syscfg_regs->pinmux[8], 2, 7 },
+ *	{ &davinci_syscfg_regs->pinmux[9], 2, 0 }
+ * };
+ *
+ * Stepping through the array, each pinmux[n] register has the given value
+ * set in the pin mux field specified.
+ *
+ * The number of pins in the array must be passed (ARRAY_SIZE can provide
+ * this value conveniently).
+ *
+ * Returns 0 if all field numbers and values are in the correct range,
+ * else returns -1.
+ */
+int davinci_configure_pin_mux(const struct pinmux_config *pins,
+			      const int n_pins)
+{
+	int i;
+
+	/* check for invalid pinmux values */
+	for (i = 0; i < n_pins; i++) {
+		if (pins[i].field >= PIN_MUX_NUM_FIELDS ||
+		    (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0)
+			return -1;
+	}
+
+	/* configure the pinmuxes */
+	for (i = 0; i < n_pins; i++) {
+		const int offset = pins[i].field * PIN_MUX_FIELD_SIZE;
+		const unsigned int value = pins[i].value << offset;
+		const unsigned int mask = PIN_MUX_FIELD_MASK << offset;
+		const dv_reg *mux = pins[i].mux;
+
+		writel(value | (readl(mux) & (~mask)), mux);
+	}
+
+	return 0;
+}
+
+/*
+ * Configure multiple pinmux resources.
+ *
+ * Takes an pinmux_resource array of pinmux_config and pin counts:
+ *
+ * const struct pinmux_resource pinmuxes[] = {
+ *	PINMUX_ITEM(uart_pins),
+ *	PINMUX_ITEM(i2c_pins),
+ * };
+ *
+ * The number of items in the array must be passed (ARRAY_SIZE can provide
+ * this value conveniently).
+ *
+ * Each item entry is configured in the defined order. If configuration
+ * of any item fails, -1 is returned and none of the following items are
+ * configured. On success, 0 is returned.
+ */
+int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
+				    const int n_items)
+{
+	int i;
+
+	for (i = 0; i < n_items; i++) {
+		if (davinci_configure_pin_mux(item[i].pins,
+					      item[i].n_pins) != 0)
+			return -1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-davinci/psc.c b/roms/u-boot/arch/arm/mach-davinci/psc.c
new file mode 100644
index 000000000..dae10aa03
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/psc.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Power and Sleep Controller (PSC) functions.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+/*
+ * The PSC manages three inputs to a "module" which may be a peripheral or
+ * CPU.  Those inputs are the module's:  clock; reset signal; and sometimes
+ * its power domain.  For our purposes, we only care whether clock and power
+ * are active, and the module is out of reset.
+ *
+ * DaVinci chips may include two separate power domains: "Always On" and "DSP".
+ * Chips without a DSP generally have only one domain.
+ *
+ * The "Always On" power domain is always on when the chip is on, and is
+ * powered by the VDD pins (on DM644X). The majority of DaVinci modules
+ * lie within the "Always On" power domain.
+ *
+ * A separate domain called the "DSP" domain houses the C64x+ and other video
+ * hardware such as VICP. In some chips, the "DSP" domain is not always on.
+ * The "DSP" power domain is powered by the CVDDDSP pins (on DM644X).
+ */
+
+/* Works on Always On power domain only (no PD argument) */
+static void lpsc_transition(unsigned int id, unsigned int state)
+{
+	dv_reg_p mdstat, mdctl, ptstat, ptcmd;
+	struct davinci_psc_regs *psc_regs;
+
+	if (id < DAVINCI_LPSC_PSC1_BASE) {
+		if (id >= PSC_PSC0_MODULE_ID_CNT)
+			return;
+		psc_regs = davinci_psc0_regs;
+		mdstat = &psc_regs->psc0.mdstat[id];
+		mdctl = &psc_regs->psc0.mdctl[id];
+	} else {
+		id -= DAVINCI_LPSC_PSC1_BASE;
+		if (id >= PSC_PSC1_MODULE_ID_CNT)
+			return;
+		psc_regs = davinci_psc1_regs;
+		mdstat = &psc_regs->psc1.mdstat[id];
+		mdctl = &psc_regs->psc1.mdctl[id];
+	}
+	ptstat = &psc_regs->ptstat;
+	ptcmd = &psc_regs->ptcmd;
+
+	while (readl(ptstat) & 0x01)
+		continue;
+
+	if ((readl(mdstat) & PSC_MDSTAT_STATE) == state)
+		return; /* Already in that state */
+
+	writel((readl(mdctl) & ~PSC_MDCTL_NEXT) | state, mdctl);
+	writel(0x01, ptcmd);
+
+	while (readl(ptstat) & 0x01)
+		continue;
+	while ((readl(mdstat) & PSC_MDSTAT_STATE) != state)
+		continue;
+}
+
+void lpsc_on(unsigned int id)
+{
+	lpsc_transition(id, 0x03);
+}
+
+void lpsc_syncreset(unsigned int id)
+{
+	lpsc_transition(id, 0x01);
+}
+
+void lpsc_disable(unsigned int id)
+{
+	lpsc_transition(id, 0x0);
+}
diff --git a/roms/u-boot/arch/arm/mach-davinci/reset.c b/roms/u-boot/arch/arm/mach-davinci/reset.c
new file mode 100644
index 000000000..0d59eb6e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/reset.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Processor reset using WDT.
+ *
+ * Copyright (C) 2012 Dmitry Bondar <bond@inmys.ru>
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/timer_defs.h>
+#include <asm/arch/hardware.h>
+
+void reset_cpu(void)
+{
+	struct davinci_timer *const wdttimer =
+		(struct davinci_timer *)DAVINCI_WDOG_BASE;
+	writel(0x08, &wdttimer->tgcr);
+	writel(readl(&wdttimer->tgcr) | 0x03, &wdttimer->tgcr);
+	writel(0, &wdttimer->tim12);
+	writel(0, &wdttimer->tim34);
+	writel(0, &wdttimer->prd12);
+	writel(0, &wdttimer->prd34);
+	writel(readl(&wdttimer->tcr) | 0x40, &wdttimer->tcr);
+	writel(readl(&wdttimer->wdtcr) | 0x4000, &wdttimer->wdtcr);
+	writel(0xa5c64000, &wdttimer->wdtcr);
+	writel(0xda7e4000, &wdttimer->wdtcr);
+	writel(0x4000, &wdttimer->wdtcr);
+	while (1)
+		/*nothing*/;
+}
diff --git a/roms/u-boot/arch/arm/mach-davinci/spl.c b/roms/u-boot/arch/arm/mach-davinci/spl.c
new file mode 100644
index 000000000..d0d7a8147
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/spl.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#include <common.h>
+#include <config.h>
+#include <hang.h>
+#include <init.h>
+#include <spl.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <nand.h>
+#include <asm/arch/dm365_lowlevel.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <spi_flash.h>
+#include <mmc.h>
+
+#ifndef CONFIG_SPL_LIBCOMMON_SUPPORT
+void puts(const char *str)
+{
+	while (*str)
+		putc(*str++);
+}
+
+void putc(char c)
+{
+	if (c == '\n')
+		ns16550_putc((struct ns16550 *)(CONFIG_SYS_NS16550_COM1), '\r');
+
+	ns16550_putc((struct ns16550 *)(CONFIG_SYS_NS16550_COM1), c);
+}
+#endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */
+
+void board_init_f(ulong dummy)
+{
+	arch_cpu_init();
+
+	spl_early_init();
+
+	preloader_console_init();
+}
+
+u32 spl_boot_device(void)
+{
+	switch (davinci_syscfg_regs->bootcfg) {
+#ifdef CONFIG_SPL_NAND_SUPPORT
+	case DAVINCI_NAND8_BOOT:
+	case DAVINCI_NAND16_BOOT:
+		return BOOT_DEVICE_NAND;
+#endif
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case DAVINCI_SD_OR_MMC_BOOT:
+	case DAVINCI_MMC_ONLY_BOOT:
+		return BOOT_DEVICE_MMC1;
+#endif
+
+#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
+	case DAVINCI_SPI0_FLASH_BOOT:
+	case DAVINCI_SPI1_FLASH_BOOT:
+		return BOOT_DEVICE_SPI;
+#endif
+
+	default:
+		puts("Unknown boot device\n");
+		hang();
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-davinci/timer.c b/roms/u-boot/arch/arm/mach-davinci/timer.c
new file mode 100644
index 000000000..43e057490
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-davinci/timer.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/timer_defs.h>
+#include <div64.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct davinci_timer * const timer =
+	(struct davinci_timer *)CONFIG_SYS_TIMERBASE;
+
+#define TIMER_LOAD_VAL	0xffffffff
+
+#define TIM_CLK_DIV	16
+
+int timer_init(void)
+{
+	/* We are using timer34 in unchained 32-bit mode, full speed */
+	writel(0x0, &timer->tcr);
+	writel(0x0, &timer->tgcr);
+	writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr);
+	writel(0x0, &timer->tim34);
+	writel(TIMER_LOAD_VAL, &timer->prd34);
+	writel(2 << 22, &timer->tcr);
+	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV;
+	gd->arch.timer_reset_value = 0;
+
+	return(0);
+}
+
+/*
+ * Get the current 64 bit timer tick count
+ */
+unsigned long long get_ticks(void)
+{
+	unsigned long now = readl(&timer->tim34);
+
+	/* increment tbu if tbl has rolled over */
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
+
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+ulong get_timer(ulong base)
+{
+	unsigned long long timer_diff;
+
+	timer_diff = get_ticks() - gd->arch.timer_reset_value;
+
+	return lldiv(timer_diff,
+		     (gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned long long endtime;
+
+	endtime = lldiv((unsigned long long)usec * gd->arch.timer_rate_hz,
+			1000000UL);
+	endtime += get_ticks();
+
+	while (get_ticks() < endtime)
+		;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}
+
+#ifdef CONFIG_HW_WATCHDOG
+static struct davinci_timer * const wdttimer =
+	(struct davinci_timer *)CONFIG_SYS_WDTTIMERBASE;
+
+/*
+ * See prufw2.pdf for using Timer as a WDT
+ */
+void davinci_hw_watchdog_enable(void)
+{
+	writel(0x0, &wdttimer->tcr);
+	writel(0x0, &wdttimer->tgcr);
+	/* TIMMODE = 2h */
+	writel(0x08 | 0x03 | ((TIM_CLK_DIV - 1) << 8), &wdttimer->tgcr);
+	writel(CONFIG_SYS_WDT_PERIOD_LOW, &wdttimer->prd12);
+	writel(CONFIG_SYS_WDT_PERIOD_HIGH, &wdttimer->prd34);
+	writel(2 << 22, &wdttimer->tcr);
+	writel(0x0, &wdttimer->tim12);
+	writel(0x0, &wdttimer->tim34);
+	/* set WDEN bit, WDKEY 0xa5c6 */
+	writel(0xa5c64000, &wdttimer->wdtcr);
+	/* clear counter register */
+	writel(0xda7e4000, &wdttimer->wdtcr);
+}
+
+void davinci_hw_watchdog_reset(void)
+{
+	writel(0xa5c64000, &wdttimer->wdtcr);
+	writel(0xda7e4000, &wdttimer->wdtcr);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/Kconfig b/roms/u-boot/arch/arm/mach-exynos/Kconfig
new file mode 100644
index 000000000..14347e7c7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/Kconfig
@@ -0,0 +1,174 @@
+if ARCH_EXYNOS
+
+choice
+	prompt "EXYNOS architecture type select"
+	optional
+
+config ARCH_EXYNOS4
+	bool "Exynos4 SoC family"
+	select BOARD_EARLY_INIT_F
+	select CPU_V7A
+	select BLK
+	select DM_MMC
+	help
+	  Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
+	  are multiple SoCs in this family including Exynos4210, Exynos4412,
+	  and Exynos4212.
+
+config ARCH_EXYNOS5
+	bool "Exynos5 SoC family"
+	select BOARD_EARLY_INIT_F
+	select CPU_V7A
+	select SHA_HW_ACCEL
+	imply CMD_HASH
+	imply CRC32_VERIFY
+	imply HASH_VERIFY
+	imply USB_ETHER_ASIX
+	imply USB_ETHER_RTL8152
+	imply USB_ETHER_SMSC95XX
+	select BLK
+	select DM_MMC
+
+	help
+	  Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
+	  Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs
+	  in this family including Exynos5250, Exynos5420 and Exynos5800.
+
+config ARCH_EXYNOS7
+	bool "Exynos7 SoC family"
+	select ARM64
+	select BOARD_EARLY_INIT_F
+	select BLK
+	select DM_MMC
+	help
+	  Samsung Exynos7 SoC family are based on ARM Cortex-A57 CPU or
+	  Cortex-A53 CPU (and some in a big.LITTLE configuration). There are
+	  multiple SoCs in this family including Exynos7420.
+
+endchoice
+
+if ARCH_EXYNOS4
+
+choice
+	prompt "EXYNOS4 board select"
+
+config TARGET_SMDKV310
+	bool "Exynos4210 SMDKV310 board"
+	select OF_CONTROL
+	select SUPPORT_SPL
+
+config TARGET_TRATS
+	bool "Exynos4210 Trats board"
+
+config TARGET_S5PC210_UNIVERSAL
+	bool "EXYNOS4210 Universal C210 board"
+
+config TARGET_ORIGEN
+	bool "Exynos4412 Origen board"
+	select SUPPORT_SPL
+
+config TARGET_TRATS2
+	bool "Exynos4412 Trat2 board"
+
+config TARGET_ODROID
+	bool "Exynos4412 Odroid board"
+
+endchoice
+endif
+
+if ARCH_EXYNOS5
+
+config SPL_GPIO_SUPPORT
+	default y
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+choice
+	prompt "EXYNOS5 board select"
+
+config TARGET_ODROID_XU3
+	bool "Exynos5422 Odroid board"
+	select OF_CONTROL
+
+config TARGET_ARNDALE
+	bool "Exynos5250 Arndale board"
+	select ARM_ERRATA_773022
+	select ARM_ERRATA_774769
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select OF_CONTROL
+	select SUPPORT_SPL
+
+config TARGET_SMDK5250
+	bool "SMDK5250 board"
+	select OF_CONTROL
+	select SUPPORT_SPL
+
+config TARGET_SNOW
+	bool "Snow board"
+	select OF_CONTROL
+	select SUPPORT_SPL
+
+config TARGET_SPRING
+	bool "Spring board"
+	select OF_CONTROL
+	select SUPPORT_SPL
+
+config TARGET_SMDK5420
+	bool "SMDK5420 board"
+	select OF_CONTROL
+	select SUPPORT_SPL
+
+config TARGET_PEACH_PI
+	bool "Peach Pi board"
+	select OF_CONTROL
+	select SUPPORT_SPL
+
+config TARGET_PEACH_PIT
+	bool "Peach Pit board"
+	select OF_CONTROL
+	select SUPPORT_SPL
+
+endchoice
+endif
+
+if ARCH_EXYNOS7
+
+choice
+	prompt "EXYNOS7 board select"
+
+config  TARGET_ESPRESSO7420
+	bool "ESPRESSO7420 board"
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select CLK_EXYNOS
+	select OF_CONTROL
+	select PINCTRL
+	select PINCTRL_EXYNOS7420
+	select SUPPORT_SPL
+
+endchoice
+endif
+
+config SYS_SOC
+	default "exynos"
+
+source "board/samsung/smdkv310/Kconfig"
+source "board/samsung/trats/Kconfig"
+source "board/samsung/universal_c210/Kconfig"
+source "board/samsung/origen/Kconfig"
+source "board/samsung/trats2/Kconfig"
+source "board/samsung/odroid/Kconfig"
+source "board/samsung/arndale/Kconfig"
+source "board/samsung/smdk5250/Kconfig"
+source "board/samsung/smdk5420/Kconfig"
+source "board/samsung/espresso7420/Kconfig"
+
+config SPL_LDSCRIPT
+	default "board/samsung/common/exynos-uboot-spl.lds" if ARCH_EXYNOS5 || ARCH_EXYNOS4
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/Makefile b/roms/u-boot/arch/arm/mach-exynos/Makefile
new file mode 100644
index 000000000..e895c1315
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2009 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+
+obj-y	+= soc.o
+obj-$(CONFIG_CPU_V7A) += clock.o pinmux.o power.o system.o
+obj-$(CONFIG_ARM64)	+= mmu-arm64.o
+
+obj-$(CONFIG_EXYNOS5420)	+= sec_boot.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_EXYNOS5)	+= clock_init_exynos5.o
+obj-$(CONFIG_EXYNOS5)	+= dmc_common.o dmc_init_ddr3.o
+obj-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o
+obj-y	+= spl_boot.o tzpc.o
+obj-y	+= lowlevel_init.o
+endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/clock.c b/roms/u-boot/arch/arm/mach-exynos/clock.c
new file mode 100644
index 000000000..ef48d35aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/clock.c
@@ -0,0 +1,1791 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/periph.h>
+
+#define PLL_DIV_1024	1024
+#define PLL_DIV_65535	65535
+#define PLL_DIV_65536	65536
+/* *
+ * This structure is to store the src bit, div bit and prediv bit
+ * positions of the peripheral clocks of the src and div registers
+ */
+struct clk_bit_info {
+	enum periph_id id;
+	int32_t src_mask;
+	int32_t div_mask;
+	int32_t prediv_mask;
+	int8_t src_bit;
+	int8_t div_bit;
+	int8_t prediv_bit;
+};
+
+static struct clk_bit_info exynos5_bit_info[] = {
+	/* periph id		s_mask	d_mask	p_mask	s_bit	d_bit	p_bit */
+	{PERIPH_ID_UART0,	0xf,	0xf,	-1,	0,	0,	-1},
+	{PERIPH_ID_UART1,	0xf,	0xf,	-1,	4,	4,	-1},
+	{PERIPH_ID_UART2,	0xf,	0xf,	-1,	8,	8,	-1},
+	{PERIPH_ID_UART3,	0xf,	0xf,	-1,	12,	12,	-1},
+	{PERIPH_ID_I2C0,	-1,	0x7,	0x7,	-1,	24,	0},
+	{PERIPH_ID_I2C1,	-1,	0x7,	0x7,	-1,	24,	0},
+	{PERIPH_ID_I2C2,	-1,	0x7,	0x7,	-1,	24,	0},
+	{PERIPH_ID_I2C3,	-1,	0x7,	0x7,	-1,	24,	0},
+	{PERIPH_ID_I2C4,	-1,	0x7,	0x7,	-1,	24,	0},
+	{PERIPH_ID_I2C5,	-1,	0x7,	0x7,	-1,	24,	0},
+	{PERIPH_ID_I2C6,	-1,	0x7,	0x7,	-1,	24,	0},
+	{PERIPH_ID_I2C7,	-1,	0x7,	0x7,	-1,	24,	0},
+	{PERIPH_ID_SPI0,	0xf,	0xf,	0xff,	16,	0,	8},
+	{PERIPH_ID_SPI1,	0xf,	0xf,	0xff,	20,	16,	24},
+	{PERIPH_ID_SPI2,	0xf,	0xf,	0xff,	24,	0,	8},
+	{PERIPH_ID_SDMMC0,	0xf,	0xf,	0xff,	0,	0,	8},
+	{PERIPH_ID_SDMMC1,	0xf,	0xf,	0xff,	4,	16,	24},
+	{PERIPH_ID_SDMMC2,	0xf,	0xf,	0xff,	8,	0,	8},
+	{PERIPH_ID_SDMMC3,	0xf,	0xf,	0xff,	12,	16,	24},
+	{PERIPH_ID_I2S0,	0xf,	0xf,	0xff,	0,	0,	4},
+	{PERIPH_ID_I2S1,	0xf,	0xf,	0xff,	4,	12,	16},
+	{PERIPH_ID_SPI3,	0xf,	0xf,	0xff,	0,	0,	4},
+	{PERIPH_ID_SPI4,	0xf,	0xf,	0xff,	4,	12,	16},
+	{PERIPH_ID_SDMMC4,	0xf,	0xf,	0xff,	16,	0,	8},
+	{PERIPH_ID_PWM0,	0xf,	0xf,	-1,	24,	0,	-1},
+	{PERIPH_ID_PWM1,	0xf,	0xf,	-1,	24,	0,	-1},
+	{PERIPH_ID_PWM2,	0xf,	0xf,	-1,	24,	0,	-1},
+	{PERIPH_ID_PWM3,	0xf,	0xf,	-1,	24,	0,	-1},
+	{PERIPH_ID_PWM4,	0xf,	0xf,	-1,	24,	0,	-1},
+
+	{PERIPH_ID_NONE,	-1,	-1,	-1,	-1,	-1,	-1},
+};
+
+static struct clk_bit_info exynos542x_bit_info[] = {
+	/* periph id		s_mask	d_mask	p_mask	s_bit	d_bit	p_bit */
+	{PERIPH_ID_UART0,	0xf,	0xf,	-1,	4,	8,	-1},
+	{PERIPH_ID_UART1,	0xf,	0xf,	-1,	8,	12,	-1},
+	{PERIPH_ID_UART2,	0xf,	0xf,	-1,	12,	16,	-1},
+	{PERIPH_ID_UART3,	0xf,	0xf,	-1,	16,	20,	-1},
+	{PERIPH_ID_I2C0,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2C1,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2C2,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2C3,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2C4,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2C5,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2C6,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2C7,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_SPI0,	0xf,	0xf,	0xff,	20,	20,	8},
+	{PERIPH_ID_SPI1,	0xf,	0xf,	0xff,	24,	24,	16},
+	{PERIPH_ID_SPI2,	0xf,	0xf,	0xff,	28,	28,	24},
+	{PERIPH_ID_SDMMC0,	0x7,	0x3ff,	-1,	8,	0,	-1},
+	{PERIPH_ID_SDMMC1,	0x7,	0x3ff,	-1,	12,	10,	-1},
+	{PERIPH_ID_SDMMC2,	0x7,	0x3ff,	-1,	16,	20,	-1},
+	{PERIPH_ID_I2C8,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2C9,	-1,	0x3f,	-1,	-1,	8,	-1},
+	{PERIPH_ID_I2S0,	0xf,	0xf,	0xff,	0,	0,	4},
+	{PERIPH_ID_I2S1,	0xf,	0xf,	0xff,	4,	12,	16},
+	{PERIPH_ID_SPI3,	0xf,	0xf,	0xff,	12,	16,	0},
+	{PERIPH_ID_SPI4,	0xf,	0xf,	0xff,	16,	20,	8},
+	{PERIPH_ID_PWM0,	0xf,	0xf,	-1,	24,	28,	-1},
+	{PERIPH_ID_PWM1,	0xf,	0xf,	-1,	24,	28,	-1},
+	{PERIPH_ID_PWM2,	0xf,	0xf,	-1,	24,	28,	-1},
+	{PERIPH_ID_PWM3,	0xf,	0xf,	-1,	24,	28,	-1},
+	{PERIPH_ID_PWM4,	0xf,	0xf,	-1,	24,	28,	-1},
+	{PERIPH_ID_I2C10,	-1,	0x3f,	-1,	-1,	8,	-1},
+
+	{PERIPH_ID_NONE,	-1,	-1,	-1,	-1,	-1,	-1},
+};
+
+/* Epll Clock division values to achive different frequency output */
+static struct set_epll_con_val exynos5_epll_div[] = {
+	{ 192000000, 0, 48, 3, 1, 0 },
+	{ 180000000, 0, 45, 3, 1, 0 },
+	{  73728000, 1, 73, 3, 3, 47710 },
+	{  67737600, 1, 90, 4, 3, 20762 },
+	{  49152000, 0, 49, 3, 3, 9961 },
+	{  45158400, 0, 45, 3, 3, 10381 },
+	{ 180633600, 0, 45, 3, 1, 10381 }
+};
+
+/* exynos: return pll clock frequency */
+static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
+{
+	unsigned long m, p, s = 0, mask, fout;
+	unsigned int div;
+	unsigned int freq;
+	/*
+	 * APLL_CON: MIDV [25:16]
+	 * MPLL_CON: MIDV [25:16]
+	 * EPLL_CON: MIDV [24:16]
+	 * VPLL_CON: MIDV [24:16]
+	 * BPLL_CON: MIDV [25:16]: Exynos5
+	 */
+	if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL ||
+	    pllreg == SPLL)
+		mask = 0x3ff;
+	else
+		mask = 0x1ff;
+
+	m = (r >> 16) & mask;
+
+	/* PDIV [13:8] */
+	p = (r >> 8) & 0x3f;
+	/* SDIV [2:0] */
+	s = r & 0x7;
+
+	freq = CONFIG_SYS_CLK_FREQ;
+
+	if (pllreg == EPLL || pllreg == RPLL) {
+		k = k & 0xffff;
+		/* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */
+		fout = (m + k / PLL_DIV_65536) * (freq / (p * (1 << s)));
+	} else if (pllreg == VPLL) {
+		k = k & 0xfff;
+
+		/*
+		 * Exynos4210
+		 * FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV)
+		 *
+		 * Exynos4412
+		 * FOUT = (MDIV + K / 65535) * FIN / (PDIV * 2^SDIV)
+		 *
+		 * Exynos5250
+		 * FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV)
+		 */
+		if (proid_is_exynos4210())
+			div = PLL_DIV_1024;
+		else if (proid_is_exynos4412())
+			div = PLL_DIV_65535;
+		else if (proid_is_exynos5250() || proid_is_exynos5420() ||
+			 proid_is_exynos5422())
+			div = PLL_DIV_65536;
+		else
+			return 0;
+
+		fout = (m + k / div) * (freq / (p * (1 << s)));
+	} else {
+		/*
+		 * Exynos4412 / Exynos5250
+		 * FOUT = MDIV * FIN / (PDIV * 2^SDIV)
+		 *
+		 * Exynos4210
+		 * FOUT = MDIV * FIN / (PDIV * 2^(SDIV-1))
+		 */
+		if (proid_is_exynos4210())
+			fout = m * (freq / (p * (1 << (s - 1))));
+		else
+			fout = m * (freq / (p * (1 << s)));
+	}
+	return fout;
+}
+
+/* exynos4: return pll clock frequency */
+static unsigned long exynos4_get_pll_clk(int pllreg)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long r, k = 0;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con0);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con0);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con0);
+		k = readl(&clk->epll_con1);
+		break;
+	case VPLL:
+		r = readl(&clk->vpll_con0);
+		k = readl(&clk->vpll_con1);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	return exynos_get_pll_clk(pllreg, r, k);
+}
+
+/* exynos4x12: return pll clock frequency */
+static unsigned long exynos4x12_get_pll_clk(int pllreg)
+{
+	struct exynos4x12_clock *clk =
+		(struct exynos4x12_clock *)samsung_get_base_clock();
+	unsigned long r, k = 0;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con0);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con0);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con0);
+		k = readl(&clk->epll_con1);
+		break;
+	case VPLL:
+		r = readl(&clk->vpll_con0);
+		k = readl(&clk->vpll_con1);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	return exynos_get_pll_clk(pllreg, r, k);
+}
+
+/* exynos5: return pll clock frequency */
+static unsigned long exynos5_get_pll_clk(int pllreg)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	unsigned long r, k = 0, fout;
+	unsigned int pll_div2_sel, fout_sel;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con0);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con0);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con0);
+		k = readl(&clk->epll_con1);
+		break;
+	case VPLL:
+		r = readl(&clk->vpll_con0);
+		k = readl(&clk->vpll_con1);
+		break;
+	case BPLL:
+		r = readl(&clk->bpll_con0);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	fout = exynos_get_pll_clk(pllreg, r, k);
+
+	/* According to the user manual, in EVT1 MPLL and BPLL always gives
+	 * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/
+	if (pllreg == MPLL || pllreg == BPLL) {
+		pll_div2_sel = readl(&clk->pll_div2_sel);
+
+		switch (pllreg) {
+		case MPLL:
+			fout_sel = (pll_div2_sel >> MPLL_FOUT_SEL_SHIFT)
+					& MPLL_FOUT_SEL_MASK;
+			break;
+		case BPLL:
+			fout_sel = (pll_div2_sel >> BPLL_FOUT_SEL_SHIFT)
+					& BPLL_FOUT_SEL_MASK;
+			break;
+		default:
+			fout_sel = -1;
+			break;
+		}
+
+		if (fout_sel == 0)
+			fout /= 2;
+	}
+
+	return fout;
+}
+
+/* exynos542x: return pll clock frequency */
+static unsigned long exynos542x_get_pll_clk(int pllreg)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned long r, k = 0;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con0);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con0);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con0);
+		k = readl(&clk->epll_con1);
+		break;
+	case VPLL:
+		r = readl(&clk->vpll_con0);
+		k = readl(&clk->vpll_con1);
+		break;
+	case BPLL:
+		r = readl(&clk->bpll_con0);
+		break;
+	case RPLL:
+		r = readl(&clk->rpll_con0);
+		k = readl(&clk->rpll_con1);
+		break;
+	case SPLL:
+		r = readl(&clk->spll_con0);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	return exynos_get_pll_clk(pllreg, r, k);
+}
+
+static struct clk_bit_info *get_clk_bit_info(int peripheral)
+{
+	int i;
+	struct clk_bit_info *info;
+
+	if (proid_is_exynos542x())
+		info = exynos542x_bit_info;
+	else
+		info = exynos5_bit_info;
+
+	for (i = 0; info[i].id != PERIPH_ID_NONE; i++) {
+		if (info[i].id == peripheral)
+			break;
+	}
+
+	if (info[i].id == PERIPH_ID_NONE)
+		debug("ERROR: Peripheral ID %d not found\n", peripheral);
+
+	return &info[i];
+}
+
+static unsigned long exynos5_get_periph_rate(int peripheral)
+{
+	struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
+	unsigned long sclk = 0;
+	unsigned int src = 0, div = 0, sub_div = 0;
+	struct exynos5_clock *clk =
+			(struct exynos5_clock *)samsung_get_base_clock();
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		src = readl(&clk->src_peric0);
+		div = readl(&clk->div_peric0);
+		break;
+	case PERIPH_ID_PWM0:
+	case PERIPH_ID_PWM1:
+	case PERIPH_ID_PWM2:
+	case PERIPH_ID_PWM3:
+	case PERIPH_ID_PWM4:
+		src = readl(&clk->src_peric0);
+		div = readl(&clk->div_peric3);
+		break;
+	case PERIPH_ID_I2S0:
+		src = readl(&clk->src_mau);
+		div = sub_div = readl(&clk->div_mau);
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+		src = readl(&clk->src_peric1);
+		div = sub_div = readl(&clk->div_peric1);
+		break;
+	case PERIPH_ID_SPI2:
+		src = readl(&clk->src_peric1);
+		div = sub_div = readl(&clk->div_peric2);
+		break;
+	case PERIPH_ID_SPI3:
+	case PERIPH_ID_SPI4:
+		src = readl(&clk->sclk_src_isp);
+		div = sub_div = readl(&clk->sclk_div_isp);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+		src = readl(&clk->src_fsys);
+		div = sub_div = readl(&clk->div_fsys1);
+		break;
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC3:
+		src = readl(&clk->src_fsys);
+		div = sub_div = readl(&clk->div_fsys2);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+		src = EXYNOS_SRC_MPLL;
+		div = readl(&clk->div_top1);
+		sub_div = readl(&clk->div_top0);
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	};
+
+	if (bit_info->src_bit >= 0)
+		src = (src >> bit_info->src_bit) & bit_info->src_mask;
+
+	switch (src) {
+	case EXYNOS_SRC_MPLL:
+		sclk = exynos5_get_pll_clk(MPLL);
+		break;
+	case EXYNOS_SRC_EPLL:
+		sclk = exynos5_get_pll_clk(EPLL);
+		break;
+	case EXYNOS_SRC_VPLL:
+		sclk = exynos5_get_pll_clk(VPLL);
+		break;
+	default:
+		debug("%s: EXYNOS_SRC %d not supported\n", __func__, src);
+		return 0;
+	}
+
+	/* Clock divider ratio for this peripheral */
+	if (bit_info->div_bit >= 0)
+		div = (div >> bit_info->div_bit) & bit_info->div_mask;
+
+	/* Clock pre-divider ratio for this peripheral */
+	if (bit_info->prediv_bit >= 0)
+		sub_div = (sub_div >> bit_info->prediv_bit)
+			  & bit_info->prediv_mask;
+
+	/* Calculate and return required clock rate */
+	return (sclk / (div + 1)) / (sub_div + 1);
+}
+
+static unsigned long exynos542x_get_periph_rate(int peripheral)
+{
+	struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
+	unsigned long sclk = 0;
+	unsigned int src = 0, div = 0, sub_div = 0;
+	struct exynos5420_clock *clk =
+			(struct exynos5420_clock *)samsung_get_base_clock();
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+	case PERIPH_ID_PWM0:
+	case PERIPH_ID_PWM1:
+	case PERIPH_ID_PWM2:
+	case PERIPH_ID_PWM3:
+	case PERIPH_ID_PWM4:
+		src = readl(&clk->src_peric0);
+		div = readl(&clk->div_peric0);
+		break;
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+	case PERIPH_ID_SPI2:
+		src = readl(&clk->src_peric1);
+		div = readl(&clk->div_peric1);
+		sub_div = readl(&clk->div_peric4);
+		break;
+	case PERIPH_ID_SPI3:
+	case PERIPH_ID_SPI4:
+		src = readl(&clk->src_isp);
+		div = readl(&clk->div_isp1);
+		sub_div = readl(&clk->div_isp1);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC3:
+		src = readl(&clk->src_fsys);
+		div = readl(&clk->div_fsys1);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+	case PERIPH_ID_I2C8:
+	case PERIPH_ID_I2C9:
+	case PERIPH_ID_I2C10:
+		src = EXYNOS542X_SRC_MPLL;
+		div = readl(&clk->div_top1);
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	};
+
+	if (bit_info->src_bit >= 0)
+		src = (src >> bit_info->src_bit) & bit_info->src_mask;
+
+	switch (src) {
+	case EXYNOS542X_SRC_MPLL:
+		sclk = exynos542x_get_pll_clk(MPLL);
+		break;
+	case EXYNOS542X_SRC_SPLL:
+		sclk = exynos542x_get_pll_clk(SPLL);
+		break;
+	case EXYNOS542X_SRC_EPLL:
+		sclk = exynos542x_get_pll_clk(EPLL);
+		break;
+	case EXYNOS542X_SRC_RPLL:
+		sclk = exynos542x_get_pll_clk(RPLL);
+		break;
+	default:
+		debug("%s: EXYNOS542X_SRC %d not supported", __func__, src);
+		return 0;
+	}
+
+	/* Clock divider ratio for this peripheral */
+	if (bit_info->div_bit >= 0)
+		div = (div >> bit_info->div_bit) & bit_info->div_mask;
+
+	/* Clock pre-divider ratio for this peripheral */
+	if (bit_info->prediv_bit >= 0)
+		sub_div = (sub_div >> bit_info->prediv_bit)
+			  & bit_info->prediv_mask;
+
+	/* Calculate and return required clock rate */
+	return (sclk / (div + 1)) / (sub_div + 1);
+}
+
+unsigned long clock_get_periph_rate(int peripheral)
+{
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			return exynos542x_get_periph_rate(peripheral);
+		return exynos5_get_periph_rate(peripheral);
+	} else {
+		return 0;
+	}
+}
+
+/* exynos4: return ARM clock frequency */
+static unsigned long exynos4_get_arm_clk(void)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long div;
+	unsigned long armclk;
+	unsigned int core_ratio;
+	unsigned int core2_ratio;
+
+	div = readl(&clk->div_cpu0);
+
+	/* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */
+	core_ratio = (div >> 0) & 0x7;
+	core2_ratio = (div >> 28) & 0x7;
+
+	armclk = get_pll_clk(APLL) / (core_ratio + 1);
+	armclk /= (core2_ratio + 1);
+
+	return armclk;
+}
+
+/* exynos4x12: return ARM clock frequency */
+static unsigned long exynos4x12_get_arm_clk(void)
+{
+	struct exynos4x12_clock *clk =
+		(struct exynos4x12_clock *)samsung_get_base_clock();
+	unsigned long div;
+	unsigned long armclk;
+	unsigned int core_ratio;
+	unsigned int core2_ratio;
+
+	div = readl(&clk->div_cpu0);
+
+	/* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */
+	core_ratio = (div >> 0) & 0x7;
+	core2_ratio = (div >> 28) & 0x7;
+
+	armclk = get_pll_clk(APLL) / (core_ratio + 1);
+	armclk /= (core2_ratio + 1);
+
+	return armclk;
+}
+
+/* exynos5: return ARM clock frequency */
+static unsigned long exynos5_get_arm_clk(void)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	unsigned long div;
+	unsigned long armclk;
+	unsigned int arm_ratio;
+	unsigned int arm2_ratio;
+
+	div = readl(&clk->div_cpu0);
+
+	/* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */
+	arm_ratio = (div >> 0) & 0x7;
+	arm2_ratio = (div >> 28) & 0x7;
+
+	armclk = get_pll_clk(APLL) / (arm_ratio + 1);
+	armclk /= (arm2_ratio + 1);
+
+	return armclk;
+}
+
+/* exynos4: return pwm clock frequency */
+static unsigned long exynos4_get_pwm_clk(void)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long pclk, sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	if (s5p_get_cpu_rev() == 0) {
+		/*
+		 * CLK_SRC_PERIL0
+		 * PWM_SEL [27:24]
+		 */
+		sel = readl(&clk->src_peril0);
+		sel = (sel >> 24) & 0xf;
+
+		if (sel == 0x6)
+			sclk = get_pll_clk(MPLL);
+		else if (sel == 0x7)
+			sclk = get_pll_clk(EPLL);
+		else if (sel == 0x8)
+			sclk = get_pll_clk(VPLL);
+		else
+			return 0;
+
+		/*
+		 * CLK_DIV_PERIL3
+		 * PWM_RATIO [3:0]
+		 */
+		ratio = readl(&clk->div_peril3);
+		ratio = ratio & 0xf;
+	} else if (s5p_get_cpu_rev() == 1) {
+		sclk = get_pll_clk(MPLL);
+		ratio = 8;
+	} else
+		return 0;
+
+	pclk = sclk / (ratio + 1);
+
+	return pclk;
+}
+
+/* exynos4x12: return pwm clock frequency */
+static unsigned long exynos4x12_get_pwm_clk(void)
+{
+	unsigned long pclk, sclk;
+	unsigned int ratio;
+
+	sclk = get_pll_clk(MPLL);
+	ratio = 8;
+
+	pclk = sclk / (ratio + 1);
+
+	return pclk;
+}
+
+/* exynos4: return uart clock frequency */
+static unsigned long exynos4_get_uart_clk(int dev_index)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long uclk, sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	/*
+	 * CLK_SRC_PERIL0
+	 * UART0_SEL [3:0]
+	 * UART1_SEL [7:4]
+	 * UART2_SEL [8:11]
+	 * UART3_SEL [12:15]
+	 * UART4_SEL [16:19]
+	 * UART5_SEL [23:20]
+	 */
+	sel = readl(&clk->src_peril0);
+	sel = (sel >> (dev_index << 2)) & 0xf;
+
+	if (sel == 0x6)
+		sclk = get_pll_clk(MPLL);
+	else if (sel == 0x7)
+		sclk = get_pll_clk(EPLL);
+	else if (sel == 0x8)
+		sclk = get_pll_clk(VPLL);
+	else
+		return 0;
+
+	/*
+	 * CLK_DIV_PERIL0
+	 * UART0_RATIO [3:0]
+	 * UART1_RATIO [7:4]
+	 * UART2_RATIO [8:11]
+	 * UART3_RATIO [12:15]
+	 * UART4_RATIO [16:19]
+	 * UART5_RATIO [23:20]
+	 */
+	ratio = readl(&clk->div_peril0);
+	ratio = (ratio >> (dev_index << 2)) & 0xf;
+
+	uclk = sclk / (ratio + 1);
+
+	return uclk;
+}
+
+/* exynos4x12: return uart clock frequency */
+static unsigned long exynos4x12_get_uart_clk(int dev_index)
+{
+	struct exynos4x12_clock *clk =
+		(struct exynos4x12_clock *)samsung_get_base_clock();
+	unsigned long uclk, sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	/*
+	 * CLK_SRC_PERIL0
+	 * UART0_SEL [3:0]
+	 * UART1_SEL [7:4]
+	 * UART2_SEL [8:11]
+	 * UART3_SEL [12:15]
+	 * UART4_SEL [16:19]
+	 */
+	sel = readl(&clk->src_peril0);
+	sel = (sel >> (dev_index << 2)) & 0xf;
+
+	if (sel == 0x6)
+		sclk = get_pll_clk(MPLL);
+	else if (sel == 0x7)
+		sclk = get_pll_clk(EPLL);
+	else if (sel == 0x8)
+		sclk = get_pll_clk(VPLL);
+	else
+		return 0;
+
+	/*
+	 * CLK_DIV_PERIL0
+	 * UART0_RATIO [3:0]
+	 * UART1_RATIO [7:4]
+	 * UART2_RATIO [8:11]
+	 * UART3_RATIO [12:15]
+	 * UART4_RATIO [16:19]
+	 */
+	ratio = readl(&clk->div_peril0);
+	ratio = (ratio >> (dev_index << 2)) & 0xf;
+
+	uclk = sclk / (ratio + 1);
+
+	return uclk;
+}
+
+static unsigned long exynos4_get_mmc_clk(int dev_index)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long uclk, sclk;
+	unsigned int sel, ratio, pre_ratio;
+	int shift = 0;
+
+	sel = readl(&clk->src_fsys);
+	sel = (sel >> (dev_index << 2)) & 0xf;
+
+	if (sel == 0x6)
+		sclk = get_pll_clk(MPLL);
+	else if (sel == 0x7)
+		sclk = get_pll_clk(EPLL);
+	else if (sel == 0x8)
+		sclk = get_pll_clk(VPLL);
+	else
+		return 0;
+
+	switch (dev_index) {
+	case 0:
+	case 1:
+		ratio = readl(&clk->div_fsys1);
+		pre_ratio = readl(&clk->div_fsys1);
+		break;
+	case 2:
+	case 3:
+		ratio = readl(&clk->div_fsys2);
+		pre_ratio = readl(&clk->div_fsys2);
+		break;
+	case 4:
+		ratio = readl(&clk->div_fsys3);
+		pre_ratio = readl(&clk->div_fsys3);
+		break;
+	default:
+		return 0;
+	}
+
+	if (dev_index == 1 || dev_index == 3)
+		shift = 16;
+
+	ratio = (ratio >> shift) & 0xf;
+	pre_ratio = (pre_ratio >> (shift + 8)) & 0xff;
+	uclk = (sclk / (ratio + 1)) / (pre_ratio + 1);
+
+	return uclk;
+}
+
+/* exynos4: set the mmc clock */
+static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned int addr, clear_bit, set_bit;
+
+	/*
+	 * CLK_DIV_FSYS1
+	 * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
+	 * CLK_DIV_FSYS2
+	 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
+	 * CLK_DIV_FSYS3
+	 * MMC4_RATIO [3:0]
+	 */
+	if (dev_index < 2) {
+		addr = (unsigned int)&clk->div_fsys1;
+		clear_bit = MASK_PRE_RATIO(dev_index);
+		set_bit = SET_PRE_RATIO(dev_index, div);
+	} else if (dev_index == 4) {
+		addr = (unsigned int)&clk->div_fsys3;
+		dev_index -= 4;
+		/* MMC4 is controlled with the MMC4_RATIO value */
+		clear_bit = MASK_RATIO(dev_index);
+		set_bit = SET_RATIO(dev_index, div);
+	} else {
+		addr = (unsigned int)&clk->div_fsys2;
+		dev_index -= 2;
+		clear_bit = MASK_PRE_RATIO(dev_index);
+		set_bit = SET_PRE_RATIO(dev_index, div);
+	}
+
+	clrsetbits_le32(addr, clear_bit, set_bit);
+}
+
+/* exynos5: set the mmc clock */
+static void exynos5_set_mmc_clk(int dev_index, unsigned int div)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	unsigned int addr;
+
+	/*
+	 * CLK_DIV_FSYS1
+	 * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
+	 * CLK_DIV_FSYS2
+	 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
+	 */
+	if (dev_index < 2) {
+		addr = (unsigned int)&clk->div_fsys1;
+	} else {
+		addr = (unsigned int)&clk->div_fsys2;
+		dev_index -= 2;
+	}
+
+	clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
+			(div & 0xff) << ((dev_index << 4) + 8));
+}
+
+/* exynos5: set the mmc clock */
+static void exynos5420_set_mmc_clk(int dev_index, unsigned int div)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned int addr;
+	unsigned int shift;
+
+	/*
+	 * CLK_DIV_FSYS1
+	 * MMC0_RATIO [9:0]
+	 * MMC1_RATIO [19:10]
+	 * MMC2_RATIO [29:20]
+	 */
+	addr = (unsigned int)&clk->div_fsys1;
+	shift = dev_index * 10;
+
+	clrsetbits_le32(addr, 0x3ff << shift, (div & 0x3ff) << shift);
+}
+
+/* get_lcd_clk: return lcd clock frequency */
+static unsigned long exynos4_get_lcd_clk(void)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long pclk, sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	/*
+	 * CLK_SRC_LCD0
+	 * FIMD0_SEL [3:0]
+	 */
+	sel = readl(&clk->src_lcd0);
+	sel = sel & 0xf;
+
+	/*
+	 * 0x6: SCLK_MPLL
+	 * 0x7: SCLK_EPLL
+	 * 0x8: SCLK_VPLL
+	 */
+	if (sel == 0x6)
+		sclk = get_pll_clk(MPLL);
+	else if (sel == 0x7)
+		sclk = get_pll_clk(EPLL);
+	else if (sel == 0x8)
+		sclk = get_pll_clk(VPLL);
+	else
+		return 0;
+
+	/*
+	 * CLK_DIV_LCD0
+	 * FIMD0_RATIO [3:0]
+	 */
+	ratio = readl(&clk->div_lcd0);
+	ratio = ratio & 0xf;
+
+	pclk = sclk / (ratio + 1);
+
+	return pclk;
+}
+
+/* get_lcd_clk: return lcd clock frequency */
+static unsigned long exynos5_get_lcd_clk(void)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	unsigned long pclk, sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	/*
+	 * CLK_SRC_LCD0
+	 * FIMD0_SEL [3:0]
+	 */
+	sel = readl(&clk->src_disp1_0);
+	sel = sel & 0xf;
+
+	/*
+	 * 0x6: SCLK_MPLL
+	 * 0x7: SCLK_EPLL
+	 * 0x8: SCLK_VPLL
+	 */
+	if (sel == 0x6)
+		sclk = get_pll_clk(MPLL);
+	else if (sel == 0x7)
+		sclk = get_pll_clk(EPLL);
+	else if (sel == 0x8)
+		sclk = get_pll_clk(VPLL);
+	else
+		return 0;
+
+	/*
+	 * CLK_DIV_LCD0
+	 * FIMD0_RATIO [3:0]
+	 */
+	ratio = readl(&clk->div_disp1_0);
+	ratio = ratio & 0xf;
+
+	pclk = sclk / (ratio + 1);
+
+	return pclk;
+}
+
+static unsigned long exynos5420_get_lcd_clk(void)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned long pclk, sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	/*
+	 * CLK_SRC_DISP10
+	 * FIMD1_SEL [4]
+	 * 0: SCLK_RPLL
+	 * 1: SCLK_SPLL
+	 */
+	sel = readl(&clk->src_disp10);
+	sel &= (1 << 4);
+
+	if (sel)
+		sclk = get_pll_clk(SPLL);
+	else
+		sclk = get_pll_clk(RPLL);
+
+	/*
+	 * CLK_DIV_DISP10
+	 * FIMD1_RATIO [3:0]
+	 */
+	ratio = readl(&clk->div_disp10);
+	ratio = ratio & 0xf;
+
+	pclk = sclk / (ratio + 1);
+
+	return pclk;
+}
+
+static unsigned long exynos5800_get_lcd_clk(void)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned long sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	/*
+	 * CLK_SRC_DISP10
+	 * CLKMUX_FIMD1 [6:4]
+	 */
+	sel = (readl(&clk->src_disp10) >> 4) & 0x7;
+
+	if (sel) {
+		/*
+		 * Mapping of CLK_SRC_DISP10 CLKMUX_FIMD1 [6:4] values into
+		 * PLLs. The first element is a placeholder to bypass the
+		 * default settig.
+		 */
+		const int reg_map[] = {0, CPLL, DPLL, MPLL, SPLL, IPLL, EPLL,
+									RPLL};
+		sclk = get_pll_clk(reg_map[sel]);
+	} else
+		sclk = CONFIG_SYS_CLK_FREQ;
+	/*
+	 * CLK_DIV_DISP10
+	 * FIMD1_RATIO [3:0]
+	 */
+	ratio = readl(&clk->div_disp10) & 0xf;
+
+	return sclk / (ratio + 1);
+}
+
+void exynos4_set_lcd_clk(void)
+{
+	struct exynos4_clock *clk =
+	    (struct exynos4_clock *)samsung_get_base_clock();
+
+	/*
+	 * CLK_GATE_BLOCK
+	 * CLK_CAM	[0]
+	 * CLK_TV	[1]
+	 * CLK_MFC	[2]
+	 * CLK_G3D	[3]
+	 * CLK_LCD0	[4]
+	 * CLK_LCD1	[5]
+	 * CLK_GPS	[7]
+	 */
+	setbits_le32(&clk->gate_block, 1 << 4);
+
+	/*
+	 * CLK_SRC_LCD0
+	 * FIMD0_SEL		[3:0]
+	 * MDNIE0_SEL		[7:4]
+	 * MDNIE_PWM0_SEL	[8:11]
+	 * MIPI0_SEL		[12:15]
+	 * set lcd0 src clock 0x6: SCLK_MPLL
+	 */
+	clrsetbits_le32(&clk->src_lcd0, 0xf, 0x6);
+
+	/*
+	 * CLK_GATE_IP_LCD0
+	 * CLK_FIMD0		[0]
+	 * CLK_MIE0		[1]
+	 * CLK_MDNIE0		[2]
+	 * CLK_DSIM0		[3]
+	 * CLK_SMMUFIMD0	[4]
+	 * CLK_PPMULCD0		[5]
+	 * Gating all clocks for FIMD0
+	 */
+	setbits_le32(&clk->gate_ip_lcd0, 1 << 0);
+
+	/*
+	 * CLK_DIV_LCD0
+	 * FIMD0_RATIO		[3:0]
+	 * MDNIE0_RATIO		[7:4]
+	 * MDNIE_PWM0_RATIO	[11:8]
+	 * MDNIE_PWM_PRE_RATIO	[15:12]
+	 * MIPI0_RATIO		[19:16]
+	 * MIPI0_PRE_RATIO	[23:20]
+	 * set fimd ratio
+	 */
+	clrsetbits_le32(&clk->div_lcd0, 0xf, 0x1);
+}
+
+void exynos5_set_lcd_clk(void)
+{
+	struct exynos5_clock *clk =
+	    (struct exynos5_clock *)samsung_get_base_clock();
+
+	/*
+	 * CLK_GATE_BLOCK
+	 * CLK_CAM	[0]
+	 * CLK_TV	[1]
+	 * CLK_MFC	[2]
+	 * CLK_G3D	[3]
+	 * CLK_LCD0	[4]
+	 * CLK_LCD1	[5]
+	 * CLK_GPS	[7]
+	 */
+	setbits_le32(&clk->gate_block, 1 << 4);
+
+	/*
+	 * CLK_SRC_LCD0
+	 * FIMD0_SEL		[3:0]
+	 * MDNIE0_SEL		[7:4]
+	 * MDNIE_PWM0_SEL	[8:11]
+	 * MIPI0_SEL		[12:15]
+	 * set lcd0 src clock 0x6: SCLK_MPLL
+	 */
+	clrsetbits_le32(&clk->src_disp1_0, 0xf, 0x6);
+
+	/*
+	 * CLK_GATE_IP_LCD0
+	 * CLK_FIMD0		[0]
+	 * CLK_MIE0		[1]
+	 * CLK_MDNIE0		[2]
+	 * CLK_DSIM0		[3]
+	 * CLK_SMMUFIMD0	[4]
+	 * CLK_PPMULCD0		[5]
+	 * Gating all clocks for FIMD0
+	 */
+	setbits_le32(&clk->gate_ip_disp1, 1 << 0);
+
+	/*
+	 * CLK_DIV_LCD0
+	 * FIMD0_RATIO		[3:0]
+	 * MDNIE0_RATIO		[7:4]
+	 * MDNIE_PWM0_RATIO	[11:8]
+	 * MDNIE_PWM_PRE_RATIO	[15:12]
+	 * MIPI0_RATIO		[19:16]
+	 * MIPI0_PRE_RATIO	[23:20]
+	 * set fimd ratio
+	 */
+	clrsetbits_le32(&clk->div_disp1_0, 0xf, 0x0);
+}
+
+void exynos5420_set_lcd_clk(void)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned int cfg;
+
+	/*
+	 * CLK_SRC_DISP10
+	 * FIMD1_SEL [4]
+	 * 0: SCLK_RPLL
+	 * 1: SCLK_SPLL
+	 */
+	cfg = readl(&clk->src_disp10);
+	cfg &= ~(0x1 << 4);
+	cfg |= (0 << 4);
+	writel(cfg, &clk->src_disp10);
+
+	/*
+	 * CLK_DIV_DISP10
+	 * FIMD1_RATIO		[3:0]
+	 */
+	cfg = readl(&clk->div_disp10);
+	cfg &= ~(0xf << 0);
+	cfg |= (0 << 0);
+	writel(cfg, &clk->div_disp10);
+}
+
+void exynos5800_set_lcd_clk(void)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned int cfg;
+
+	/*
+	 * Use RPLL for pixel clock
+	 * CLK_SRC_DISP10 CLKMUX_FIMD1 [6:4]
+	 * ==================
+	 * 111: SCLK_RPLL
+	 */
+	cfg = readl(&clk->src_disp10) | (0x7 << 4);
+	writel(cfg, &clk->src_disp10);
+
+	/*
+	 * CLK_DIV_DISP10
+	 * FIMD1_RATIO		[3:0]
+	 */
+	clrsetbits_le32(&clk->div_disp10, 0xf << 0, 0x0 << 0);
+}
+
+void exynos4_set_mipi_clk(void)
+{
+	struct exynos4_clock *clk =
+	    (struct exynos4_clock *)samsung_get_base_clock();
+
+	/*
+	 * CLK_SRC_LCD0
+	 * FIMD0_SEL		[3:0]
+	 * MDNIE0_SEL		[7:4]
+	 * MDNIE_PWM0_SEL	[8:11]
+	 * MIPI0_SEL		[12:15]
+	 * set mipi0 src clock 0x6: SCLK_MPLL
+	 */
+	clrsetbits_le32(&clk->src_lcd0, 0xf << 12, 0x6 << 12);
+
+	/*
+	 * CLK_SRC_MASK_LCD0
+	 * FIMD0_MASK		[0]
+	 * MDNIE0_MASK		[4]
+	 * MDNIE_PWM0_MASK	[8]
+	 * MIPI0_MASK		[12]
+	 * set src mask mipi0 0x1: Unmask
+	 */
+	setbits_le32(&clk->src_mask_lcd0, 0x1 << 12);
+
+	/*
+	 * CLK_GATE_IP_LCD0
+	 * CLK_FIMD0		[0]
+	 * CLK_MIE0		[1]
+	 * CLK_MDNIE0		[2]
+	 * CLK_DSIM0		[3]
+	 * CLK_SMMUFIMD0	[4]
+	 * CLK_PPMULCD0		[5]
+	 * Gating all clocks for MIPI0
+	 */
+	setbits_le32(&clk->gate_ip_lcd0, 1 << 3);
+
+	/*
+	 * CLK_DIV_LCD0
+	 * FIMD0_RATIO		[3:0]
+	 * MDNIE0_RATIO		[7:4]
+	 * MDNIE_PWM0_RATIO	[11:8]
+	 * MDNIE_PWM_PRE_RATIO	[15:12]
+	 * MIPI0_RATIO		[19:16]
+	 * MIPI0_PRE_RATIO	[23:20]
+	 * set mipi ratio
+	 */
+	clrsetbits_le32(&clk->div_lcd0, 0xf << 16, 0x1 << 16);
+}
+
+int exynos5_set_epll_clk(unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+	unsigned int lockcnt;
+	unsigned int start;
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+
+	epll_con = readl(&clk->epll_con0);
+	epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
+			EPLL_CON0_LOCK_DET_EN_SHIFT) |
+		EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
+		EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT |
+		EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) {
+		if (exynos5_epll_div[i].freq_out == rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(exynos5_epll_div))
+		return -1;
+
+	epll_con_k = exynos5_epll_div[i].k_dsm << 0;
+	epll_con |= exynos5_epll_div[i].en_lock_det <<
+				EPLL_CON0_LOCK_DET_EN_SHIFT;
+	epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT;
+	epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT;
+	epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT;
+
+	/*
+	 * Required period ( in cycles) to genarate a stable clock output.
+	 * The maximum clock time can be up to 3000 * PDIV cycles of PLLs
+	 * frequency input (as per spec)
+	 */
+	lockcnt = 3000 * exynos5_epll_div[i].p_div;
+
+	writel(lockcnt, &clk->epll_lock);
+	writel(epll_con, &clk->epll_con0);
+	writel(epll_con_k, &clk->epll_con1);
+
+	start = get_timer(0);
+
+	 while (!(readl(&clk->epll_con0) &
+			(0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
+		if (get_timer(start) > TIMEOUT_EPLL_LOCK) {
+			debug("%s: Timeout waiting for EPLL lock\n", __func__);
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static int exynos5420_set_i2s_clk_source(void)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+
+	setbits_le32(&clk->src_top6, EXYNOS5420_CLK_SRC_MOUT_EPLL);
+	clrsetbits_le32(&clk->src_mau, EXYNOS5420_AUDIO0_SEL_MASK,
+			(EXYNOS5420_CLK_SRC_SCLK_EPLL));
+	setbits_le32(EXYNOS5_AUDIOSS_BASE, 1 << 0);
+
+	return 0;
+}
+
+int exynos5_set_i2s_clk_source(unsigned int i2s_id)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	unsigned int *audio_ass = (unsigned int *)samsung_get_base_audio_ass();
+
+	if (i2s_id == 0) {
+		setbits_le32(&clk->src_top2, CLK_SRC_MOUT_EPLL);
+		clrsetbits_le32(&clk->src_mau, AUDIO0_SEL_MASK,
+				(CLK_SRC_SCLK_EPLL));
+		setbits_le32(audio_ass, AUDIO_CLKMUX_ASS);
+	} else if (i2s_id == 1) {
+		clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK,
+				(CLK_SRC_SCLK_EPLL));
+	} else {
+		return -1;
+	}
+	return 0;
+}
+
+int exynos5_set_i2s_clk_prescaler(unsigned int src_frq,
+				  unsigned int dst_frq,
+				  unsigned int i2s_id)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	unsigned int div;
+
+	if ((dst_frq == 0) || (src_frq == 0)) {
+		debug("%s: Invalid requency input for prescaler\n", __func__);
+		debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+		return -1;
+	}
+
+	div = (src_frq / dst_frq);
+	if (i2s_id == 0) {
+		if (div > AUDIO_0_RATIO_MASK) {
+			debug("%s: Frequency ratio is out of range\n",
+			      __func__);
+			debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+			return -1;
+		}
+		clrsetbits_le32(&clk->div_mau, AUDIO_0_RATIO_MASK,
+				(div & AUDIO_0_RATIO_MASK));
+	} else if (i2s_id == 1) {
+		if (div > AUDIO_1_RATIO_MASK) {
+			debug("%s: Frequency ratio is out of range\n",
+			      __func__);
+			debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+			return -1;
+		}
+		clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK,
+				(div & AUDIO_1_RATIO_MASK));
+	} else {
+		return -1;
+	}
+	return 0;
+}
+
+/**
+ * Linearly searches for the most accurate main and fine stage clock scalars
+ * (divisors) for a specified target frequency and scalar bit sizes by checking
+ * all multiples of main_scalar_bits values. Will always return scalars up to or
+ * slower than target.
+ *
+ * @param main_scalar_bits	Number of main scalar bits, must be > 0 and < 32
+ * @param fine_scalar_bits	Number of fine scalar bits, must be > 0 and < 32
+ * @param input_freq		Clock frequency to be scaled in Hz
+ * @param target_freq		Desired clock frequency in Hz
+ * @param best_fine_scalar	Pointer to store the fine stage divisor
+ *
+ * @return best_main_scalar	Main scalar for desired frequency or -1 if none
+ * found
+ */
+static int clock_calc_best_scalar(unsigned int main_scaler_bits,
+	unsigned int fine_scalar_bits, unsigned int input_rate,
+	unsigned int target_rate, unsigned int *best_fine_scalar)
+{
+	int i;
+	int best_main_scalar = -1;
+	unsigned int best_error = target_rate;
+	const unsigned int cap = (1 << fine_scalar_bits) - 1;
+	const unsigned int loops = 1 << main_scaler_bits;
+
+	debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate,
+			target_rate, cap);
+
+	assert(best_fine_scalar != NULL);
+	assert(main_scaler_bits <= fine_scalar_bits);
+
+	*best_fine_scalar = 1;
+
+	if (input_rate == 0 || target_rate == 0)
+		return -1;
+
+	if (target_rate >= input_rate)
+		return 1;
+
+	for (i = 1; i <= loops; i++) {
+		const unsigned int effective_div =
+			max(min(input_rate / i / target_rate, cap), 1U);
+		const unsigned int effective_rate = input_rate / i /
+							effective_div;
+		const int error = target_rate - effective_rate;
+
+		debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div,
+				effective_rate, error);
+
+		if (error >= 0 && error <= best_error) {
+			best_error = error;
+			best_main_scalar = i;
+			*best_fine_scalar = effective_div;
+		}
+	}
+
+	return best_main_scalar;
+}
+
+static int exynos5_set_spi_clk(enum periph_id periph_id,
+					unsigned int rate)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	int main;
+	unsigned int fine;
+	unsigned shift, pre_shift;
+	unsigned mask = 0xff;
+	u32 *reg;
+
+	main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine);
+	if (main < 0) {
+		debug("%s: Cannot set clock rate for periph %d",
+				__func__, periph_id);
+		return -1;
+	}
+	main = main - 1;
+	fine = fine - 1;
+
+	switch (periph_id) {
+	case PERIPH_ID_SPI0:
+		reg = &clk->div_peric1;
+		shift = 0;
+		pre_shift = 8;
+		break;
+	case PERIPH_ID_SPI1:
+		reg = &clk->div_peric1;
+		shift = 16;
+		pre_shift = 24;
+		break;
+	case PERIPH_ID_SPI2:
+		reg = &clk->div_peric2;
+		shift = 0;
+		pre_shift = 8;
+		break;
+	case PERIPH_ID_SPI3:
+		reg = &clk->sclk_div_isp;
+		shift = 0;
+		pre_shift = 4;
+		break;
+	case PERIPH_ID_SPI4:
+		reg = &clk->sclk_div_isp;
+		shift = 12;
+		pre_shift = 16;
+		break;
+	default:
+		debug("%s: Unsupported peripheral ID %d\n", __func__,
+		      periph_id);
+		return -1;
+	}
+	clrsetbits_le32(reg, mask << shift, (main & mask) << shift);
+	clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift);
+
+	return 0;
+}
+
+static int exynos5420_set_spi_clk(enum periph_id periph_id,
+					unsigned int rate)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	int main;
+	unsigned int fine;
+	unsigned shift, pre_shift;
+	unsigned div_mask = 0xf, pre_div_mask = 0xff;
+	u32 *reg;
+	u32 *pre_reg;
+
+	main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine);
+	if (main < 0) {
+		debug("%s: Cannot set clock rate for periph %d",
+		      __func__, periph_id);
+		return -1;
+	}
+	main = main - 1;
+	fine = fine - 1;
+
+	switch (periph_id) {
+	case PERIPH_ID_SPI0:
+		reg = &clk->div_peric1;
+		shift = 20;
+		pre_reg = &clk->div_peric4;
+		pre_shift = 8;
+		break;
+	case PERIPH_ID_SPI1:
+		reg = &clk->div_peric1;
+		shift = 24;
+		pre_reg = &clk->div_peric4;
+		pre_shift = 16;
+		break;
+	case PERIPH_ID_SPI2:
+		reg = &clk->div_peric1;
+		shift = 28;
+		pre_reg = &clk->div_peric4;
+		pre_shift = 24;
+		break;
+	case PERIPH_ID_SPI3:
+		reg = &clk->div_isp1;
+		shift = 16;
+		pre_reg = &clk->div_isp1;
+		pre_shift = 0;
+		break;
+	case PERIPH_ID_SPI4:
+		reg = &clk->div_isp1;
+		shift = 20;
+		pre_reg = &clk->div_isp1;
+		pre_shift = 8;
+		break;
+	default:
+		debug("%s: Unsupported peripheral ID %d\n", __func__,
+		      periph_id);
+		return -1;
+	}
+
+	clrsetbits_le32(reg, div_mask << shift, (main & div_mask) << shift);
+	clrsetbits_le32(pre_reg, pre_div_mask << pre_shift,
+			(fine & pre_div_mask) << pre_shift);
+
+	return 0;
+}
+
+static unsigned long exynos4_get_i2c_clk(void)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long sclk, aclk_100;
+	unsigned int ratio;
+
+	sclk = get_pll_clk(APLL);
+
+	ratio = (readl(&clk->div_top)) >> 4;
+	ratio &= 0xf;
+	aclk_100 = sclk / (ratio + 1);
+	return aclk_100;
+}
+
+unsigned long get_pll_clk(int pllreg)
+{
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			return exynos542x_get_pll_clk(pllreg);
+		return exynos5_get_pll_clk(pllreg);
+	} else if (cpu_is_exynos4()) {
+		if (proid_is_exynos4412())
+			return exynos4x12_get_pll_clk(pllreg);
+		return exynos4_get_pll_clk(pllreg);
+	}
+
+	return 0;
+}
+
+unsigned long get_arm_clk(void)
+{
+	if (cpu_is_exynos5()) {
+		return exynos5_get_arm_clk();
+	} else if (cpu_is_exynos4()) {
+		if (proid_is_exynos4412())
+			return exynos4x12_get_arm_clk();
+		return exynos4_get_arm_clk();
+	}
+
+	return 0;
+}
+
+unsigned long get_i2c_clk(void)
+{
+	if (cpu_is_exynos5())
+		return clock_get_periph_rate(PERIPH_ID_I2C0);
+	else if (cpu_is_exynos4())
+		return exynos4_get_i2c_clk();
+
+	return 0;
+}
+
+unsigned long get_pwm_clk(void)
+{
+	if (cpu_is_exynos5()) {
+		return clock_get_periph_rate(PERIPH_ID_PWM0);
+	} else if (cpu_is_exynos4()) {
+		if (proid_is_exynos4412())
+			return exynos4x12_get_pwm_clk();
+		return exynos4_get_pwm_clk();
+	}
+
+	return 0;
+}
+
+unsigned long get_uart_clk(int dev_index)
+{
+	enum periph_id id;
+
+	switch (dev_index) {
+	case 0:
+		id = PERIPH_ID_UART0;
+		break;
+	case 1:
+		id = PERIPH_ID_UART1;
+		break;
+	case 2:
+		id = PERIPH_ID_UART2;
+		break;
+	case 3:
+		id = PERIPH_ID_UART3;
+		break;
+	default:
+		debug("%s: invalid UART index %d", __func__, dev_index);
+		return -1;
+	}
+
+	if (cpu_is_exynos5()) {
+		return clock_get_periph_rate(id);
+	} else if (cpu_is_exynos4()) {
+		if (proid_is_exynos4412())
+			return exynos4x12_get_uart_clk(dev_index);
+		return exynos4_get_uart_clk(dev_index);
+	}
+
+	return 0;
+}
+
+unsigned long get_mmc_clk(int dev_index)
+{
+	enum periph_id id;
+
+	if (cpu_is_exynos4())
+		return exynos4_get_mmc_clk(dev_index);
+
+	switch (dev_index) {
+	case 0:
+		id = PERIPH_ID_SDMMC0;
+		break;
+	case 1:
+		id = PERIPH_ID_SDMMC1;
+		break;
+	case 2:
+		id = PERIPH_ID_SDMMC2;
+		break;
+	case 3:
+		id = PERIPH_ID_SDMMC3;
+		break;
+	default:
+		debug("%s: invalid MMC index %d", __func__, dev_index);
+		return -1;
+	}
+
+	return clock_get_periph_rate(id);
+}
+
+void set_mmc_clk(int dev_index, unsigned int div)
+{
+	/* If want to set correct value, it needs to substract one from div.*/
+	if (div > 0)
+		div -= 1;
+
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			exynos5420_set_mmc_clk(dev_index, div);
+		else
+			exynos5_set_mmc_clk(dev_index, div);
+	} else if (cpu_is_exynos4()) {
+		exynos4_set_mmc_clk(dev_index, div);
+	}
+}
+
+unsigned long get_lcd_clk(void)
+{
+	if (cpu_is_exynos4()) {
+		return exynos4_get_lcd_clk();
+	} else if (cpu_is_exynos5()) {
+		if (proid_is_exynos5420())
+			return exynos5420_get_lcd_clk();
+		else if (proid_is_exynos5422())
+			return exynos5800_get_lcd_clk();
+		else
+			return exynos5_get_lcd_clk();
+	}
+
+	return 0;
+}
+
+void set_lcd_clk(void)
+{
+	if (cpu_is_exynos4()) {
+		exynos4_set_lcd_clk();
+	} else if (cpu_is_exynos5()) {
+		if (proid_is_exynos5250())
+			exynos5_set_lcd_clk();
+		else if (proid_is_exynos5420())
+			exynos5420_set_lcd_clk();
+		else
+			exynos5800_set_lcd_clk();
+	}
+}
+
+void set_mipi_clk(void)
+{
+	if (cpu_is_exynos4())
+		exynos4_set_mipi_clk();
+}
+
+int set_spi_clk(int periph_id, unsigned int rate)
+{
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			return exynos5420_set_spi_clk(periph_id, rate);
+		return exynos5_set_spi_clk(periph_id, rate);
+	}
+
+	return 0;
+}
+
+int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq,
+			  unsigned int i2s_id)
+{
+	if (cpu_is_exynos5())
+		return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq, i2s_id);
+
+	return 0;
+}
+
+int set_i2s_clk_source(unsigned int i2s_id)
+{
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			return exynos5420_set_i2s_clk_source();
+		else
+			return exynos5_set_i2s_clk_source(i2s_id);
+	}
+
+	return 0;
+}
+
+int set_epll_clk(unsigned long rate)
+{
+	if (cpu_is_exynos5())
+		return exynos5_set_epll_clk(rate);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/clock_init.h b/roms/u-boot/arch/arm/mach-exynos/clock_init.h
new file mode 100644
index 000000000..a4d3fdae8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/clock_init.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Clock initialization routines
+ *
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+#ifndef __EXYNOS_CLOCK_INIT_H
+#define __EXYNOS_CLOCK_INIT_H
+
+enum {
+#ifdef CONFIG_EXYNOS5420
+	MEM_TIMINGS_MSR_COUNT	= 5,
+#else
+	MEM_TIMINGS_MSR_COUNT	= 4,
+#endif
+};
+
+/* These are the ratio's for configuring ARM clock */
+struct arm_clk_ratios {
+	unsigned arm_freq_mhz;		/* Frequency of ARM core in MHz */
+
+	unsigned apll_mdiv;
+	unsigned apll_pdiv;
+	unsigned apll_sdiv;
+
+	unsigned arm2_ratio;
+	unsigned apll_ratio;
+	unsigned pclk_dbg_ratio;
+	unsigned atb_ratio;
+	unsigned periph_ratio;
+	unsigned acp_ratio;
+	unsigned cpud_ratio;
+	unsigned arm_ratio;
+};
+
+/* These are the memory timings for a particular memory type and speed */
+struct mem_timings {
+	enum mem_manuf mem_manuf;	/* Memory manufacturer */
+	enum ddr_mode mem_type;		/* Memory type */
+	unsigned frequency_mhz;		/* Frequency of memory in MHz */
+
+	/* Here follow the timing parameters for the selected memory */
+	unsigned apll_mdiv;
+	unsigned apll_pdiv;
+	unsigned apll_sdiv;
+	unsigned mpll_mdiv;
+	unsigned mpll_pdiv;
+	unsigned mpll_sdiv;
+	unsigned cpll_mdiv;
+	unsigned cpll_pdiv;
+	unsigned cpll_sdiv;
+	unsigned gpll_mdiv;
+	unsigned gpll_pdiv;
+	unsigned gpll_sdiv;
+	unsigned epll_mdiv;
+	unsigned epll_pdiv;
+	unsigned epll_sdiv;
+	unsigned vpll_mdiv;
+	unsigned vpll_pdiv;
+	unsigned vpll_sdiv;
+	unsigned bpll_mdiv;
+	unsigned bpll_pdiv;
+	unsigned bpll_sdiv;
+	unsigned kpll_mdiv;
+	unsigned kpll_pdiv;
+	unsigned kpll_sdiv;
+	unsigned dpll_mdiv;
+	unsigned dpll_pdiv;
+	unsigned dpll_sdiv;
+	unsigned ipll_mdiv;
+	unsigned ipll_pdiv;
+	unsigned ipll_sdiv;
+	unsigned spll_mdiv;
+	unsigned spll_pdiv;
+	unsigned spll_sdiv;
+	unsigned rpll_mdiv;
+	unsigned rpll_pdiv;
+	unsigned rpll_sdiv;
+	unsigned pclk_cdrex_ratio;
+	unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
+
+	unsigned timing_ref;
+	unsigned timing_row;
+	unsigned timing_data;
+	unsigned timing_power;
+
+	/* DQS, DQ, DEBUG offsets */
+	unsigned phy0_dqs;
+	unsigned phy1_dqs;
+	unsigned phy0_dq;
+	unsigned phy1_dq;
+	unsigned phy0_tFS;
+	unsigned phy1_tFS;
+	unsigned phy0_pulld_dqs;
+	unsigned phy1_pulld_dqs;
+
+	unsigned lpddr3_ctrl_phy_reset;
+	unsigned ctrl_start_point;
+	unsigned ctrl_inc;
+	unsigned ctrl_start;
+	unsigned ctrl_dll_on;
+	unsigned ctrl_ref;
+
+	unsigned ctrl_force;
+	unsigned ctrl_rdlat;
+	unsigned ctrl_bstlen;
+
+	unsigned fp_resync;
+	unsigned iv_size;
+	unsigned dfi_init_start;
+	unsigned aref_en;
+
+	unsigned rd_fetch;
+
+	unsigned zq_mode_dds;
+	unsigned zq_mode_term;
+	unsigned zq_mode_noterm;	/* 1 to allow termination disable */
+
+	unsigned memcontrol;
+	unsigned memconfig;
+
+	unsigned membaseconfig0;
+	unsigned membaseconfig1;
+	unsigned prechconfig_tp_cnt;
+	unsigned dpwrdn_cyc;
+	unsigned dsref_cyc;
+	unsigned concontrol;
+	/* Channel and Chip Selection */
+	uint8_t dmc_channels;		/* number of memory channels */
+	uint8_t chips_per_channel;	/* number of chips per channel */
+	uint8_t chips_to_configure;	/* number of chips to configure */
+	uint8_t send_zq_init;		/* 1 to send this command */
+	unsigned impedance;		/* drive strength impedeance */
+	uint8_t gate_leveling_enable;	/* check gate leveling is enabled */
+	uint8_t read_leveling_enable;	/* check h/w read leveling is enabled */
+};
+
+/**
+ * Get the correct memory timings for our selected memory type and speed.
+ *
+ * This function can be called from SPL or the main U-Boot.
+ *
+ * @return pointer to the memory timings that we should use
+ */
+struct mem_timings *clock_get_mem_timings(void);
+
+/*
+ * Initialize clock for the device
+ */
+void system_clock_init(void);
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ */
+void emmc_boot_clk_div_set(void);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/clock_init_exynos4.c b/roms/u-boot/arch/arm/mach-exynos/clock_init_exynos4.c
new file mode 100644
index 000000000..584e4bac0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/clock_init_exynos4.c
@@ -0,0 +1,94 @@
+/*
+ * Clock Initialization for board based on EXYNOS4210
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include "common_setup.h"
+#include "exynos4_setup.h"
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+void system_clock_init(void)
+{
+	struct exynos4_clock *clk =
+			(struct exynos4_clock *)samsung_get_base_clock();
+
+	writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
+
+	sdelay(0x10000);
+
+	writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+	writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+	writel(CLK_SRC_DMC_VAL, &clk->src_dmc);
+	writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus);
+	writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus);
+	writel(CLK_SRC_FSYS_VAL, &clk->src_fsys);
+	writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0);
+	writel(CLK_SRC_CAM_VAL, &clk->src_cam);
+	writel(CLK_SRC_MFC_VAL, &clk->src_mfc);
+	writel(CLK_SRC_G3D_VAL, &clk->src_g3d);
+	writel(CLK_SRC_LCD0_VAL, &clk->src_lcd0);
+
+	sdelay(0x10000);
+
+	writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
+	writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
+	writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0);
+	writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1);
+	writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus);
+	writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus);
+	writel(CLK_DIV_TOP_VAL, &clk->div_top);
+	writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
+	writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
+	writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3);
+	writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0);
+	writel(CLK_DIV_CAM_VAL, &clk->div_cam);
+	writel(CLK_DIV_MFC_VAL, &clk->div_mfc);
+	writel(CLK_DIV_G3D_VAL, &clk->div_g3d);
+	writel(CLK_DIV_LCD0_VAL, &clk->div_lcd0);
+
+	/* Set PLL locktime */
+	writel(PLL_LOCKTIME, &clk->apll_lock);
+	writel(PLL_LOCKTIME, &clk->mpll_lock);
+	writel(PLL_LOCKTIME, &clk->epll_lock);
+	writel(PLL_LOCKTIME, &clk->vpll_lock);
+
+	writel(APLL_CON1_VAL, &clk->apll_con1);
+	writel(APLL_CON0_VAL, &clk->apll_con0);
+	writel(MPLL_CON1_VAL, &clk->mpll_con1);
+	writel(MPLL_CON0_VAL, &clk->mpll_con0);
+	writel(EPLL_CON1_VAL, &clk->epll_con1);
+	writel(EPLL_CON0_VAL, &clk->epll_con0);
+	writel(VPLL_CON1_VAL, &clk->vpll_con1);
+	writel(VPLL_CON0_VAL, &clk->vpll_con0);
+
+	sdelay(0x30000);
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/clock_init_exynos5.c b/roms/u-boot/arch/arm/mach-exynos/clock_init_exynos5.c
new file mode 100644
index 000000000..1cb8d391e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/clock_init_exynos5.c
@@ -0,0 +1,1002 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock setup for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/dwmmc.h>
+
+#include "clock_init.h"
+#include "common_setup.h"
+#include "exynos5_setup.h"
+
+#define FSYS1_MMC0_DIV_MASK	0xff0f
+#define FSYS1_MMC0_DIV_VAL	0x0701
+
+struct arm_clk_ratios arm_clk_ratios[] = {
+#ifdef CONFIG_EXYNOS5420
+	{
+		.arm_freq_mhz = 900,
+
+		.apll_mdiv = 0x96,
+		.apll_pdiv = 0x2,
+		.apll_sdiv = 0x1,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x3,
+		.pclk_dbg_ratio = 0x6,
+		.atb_ratio = 0x6,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x0,
+		.cpud_ratio = 0x2,
+		.arm_ratio = 0x0,
+	}
+#else
+	{
+		.arm_freq_mhz = 600,
+
+		.apll_mdiv = 0xc8,
+		.apll_pdiv = 0x4,
+		.apll_sdiv = 0x1,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x1,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x2,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x1,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 800,
+
+		.apll_mdiv = 0x64,
+		.apll_pdiv = 0x3,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x1,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x3,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x2,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 1000,
+
+		.apll_mdiv = 0x7d,
+		.apll_pdiv = 0x3,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x1,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x4,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x2,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 1200,
+
+		.apll_mdiv = 0x96,
+		.apll_pdiv = 0x3,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x3,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x5,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x3,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 1400,
+
+		.apll_mdiv = 0xaf,
+		.apll_pdiv = 0x3,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x3,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x6,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x3,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 1700,
+
+		.apll_mdiv = 0x1a9,
+		.apll_pdiv = 0x6,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x3,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x6,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x3,
+		.arm_ratio = 0x0,
+	}
+#endif
+};
+
+struct mem_timings mem_timings[] = {
+#ifdef CONFIG_EXYNOS5420
+	{
+		.mem_manuf = MEM_MANUF_SAMSUNG,
+		.mem_type = DDR_MODE_DDR3,
+		.frequency_mhz = 800,
+
+		/* MPLL @800MHz*/
+		.mpll_mdiv = 0xc8,
+		.mpll_pdiv = 0x3,
+		.mpll_sdiv = 0x1,
+		/* CPLL @666MHz */
+		.cpll_mdiv = 0xde,
+		.cpll_pdiv = 0x4,
+		.cpll_sdiv = 0x1,
+		/* EPLL @600MHz */
+		.epll_mdiv = 0x64,
+		.epll_pdiv = 0x2,
+		.epll_sdiv = 0x1,
+		/* VPLL @430MHz */
+		.vpll_mdiv = 0xd7,
+		.vpll_pdiv = 0x3,
+		.vpll_sdiv = 0x2,
+		/* BPLL @800MHz */
+		.bpll_mdiv = 0xc8,
+		.bpll_pdiv = 0x3,
+		.bpll_sdiv = 0x1,
+		/* KPLL @600MHz */
+		.kpll_mdiv = 0x190,
+		.kpll_pdiv = 0x4,
+		.kpll_sdiv = 0x2,
+		/* DPLL @600MHz */
+		.dpll_mdiv = 0x190,
+		.dpll_pdiv = 0x4,
+		.dpll_sdiv = 0x2,
+		/* IPLL @370MHz */
+		.ipll_mdiv = 0xb9,
+		.ipll_pdiv = 0x3,
+		.ipll_sdiv = 0x2,
+		/* SPLL @400MHz */
+		.spll_mdiv = 0xc8,
+		.spll_pdiv = 0x3,
+		.spll_sdiv = 0x2,
+		/* RPLL @141Mhz */
+		.rpll_mdiv = 0x5E,
+		.rpll_pdiv = 0x2,
+		.rpll_sdiv = 0x3,
+
+		.direct_cmd_msr = {
+			0x00020018, 0x00030000, 0x00010046, 0x00000d70,
+			0x00000c70
+		},
+		.timing_ref = 0x000000bb,
+		.timing_row = 0x6836650f,
+		.timing_data = 0x3630580b,
+		.timing_power = 0x41000a26,
+		.phy0_dqs = 0x08080808,
+		.phy1_dqs = 0x08080808,
+		.phy0_dq = 0x08080808,
+		.phy1_dq = 0x08080808,
+		.phy0_tFS = 0x8,
+		.phy1_tFS = 0x8,
+		.phy0_pulld_dqs = 0xf,
+		.phy1_pulld_dqs = 0xf,
+
+		.lpddr3_ctrl_phy_reset = 0x1,
+		.ctrl_start_point = 0x10,
+		.ctrl_inc = 0x10,
+		.ctrl_start = 0x1,
+		.ctrl_dll_on = 0x1,
+		.ctrl_ref = 0x8,
+
+		.ctrl_force = 0x1a,
+		.ctrl_rdlat = 0x0b,
+		.ctrl_bstlen = 0x08,
+
+		.fp_resync = 0x8,
+		.iv_size = 0x7,
+		.dfi_init_start = 1,
+		.aref_en = 1,
+
+		.rd_fetch = 0x3,
+
+		.zq_mode_dds = 0x7,
+		.zq_mode_term = 0x1,
+		.zq_mode_noterm = 1,
+
+		/*
+		* Dynamic Clock: Always Running
+		* Memory Burst length: 8
+		* Number of chips: 1
+		* Memory Bus width: 32 bit
+		* Memory Type: DDR3
+		* Additional Latancy for PLL: 0 Cycle
+		*/
+		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+			DMC_MEMCONTROL_TP_DISABLE |
+			DMC_MEMCONTROL_DSREF_DISABLE |
+			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+			DMC_MEMCONTROL_NUM_CHIP_1 |
+			DMC_MEMCONTROL_BL_8 |
+			DMC_MEMCONTROL_PZQ_DISABLE |
+			DMC_MEMCONTROL_MRR_BYTE_7_0,
+		.memconfig = DMC_MEMCONFIG_CHIP_MAP_SPLIT |
+			DMC_MEMCONFIGX_CHIP_COL_10 |
+			DMC_MEMCONFIGX_CHIP_ROW_15 |
+			DMC_MEMCONFIGX_CHIP_BANK_8,
+		.prechconfig_tp_cnt = 0xff,
+		.dpwrdn_cyc = 0xff,
+		.dsref_cyc = 0xffff,
+		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+			DMC_CONCONTROL_RD_FETCH_DISABLE |
+			DMC_CONCONTROL_EMPTY_DISABLE |
+			DMC_CONCONTROL_AREF_EN_DISABLE |
+			DMC_CONCONTROL_IO_PD_CON_DISABLE,
+		.dmc_channels = 1,
+		.chips_per_channel = 1,
+		.chips_to_configure = 1,
+		.send_zq_init = 1,
+		.gate_leveling_enable = 1,
+		.read_leveling_enable = 0,
+	}
+#else
+	{
+		.mem_manuf = MEM_MANUF_ELPIDA,
+		.mem_type = DDR_MODE_DDR3,
+		.frequency_mhz = 800,
+		.mpll_mdiv = 0xc8,
+		.mpll_pdiv = 0x3,
+		.mpll_sdiv = 0x0,
+		.cpll_mdiv = 0xde,
+		.cpll_pdiv = 0x4,
+		.cpll_sdiv = 0x2,
+		.gpll_mdiv = 0x215,
+		.gpll_pdiv = 0xc,
+		.gpll_sdiv = 0x1,
+		.epll_mdiv = 0x60,
+		.epll_pdiv = 0x3,
+		.epll_sdiv = 0x3,
+		.vpll_mdiv = 0x96,
+		.vpll_pdiv = 0x3,
+		.vpll_sdiv = 0x2,
+
+		.bpll_mdiv = 0x64,
+		.bpll_pdiv = 0x3,
+		.bpll_sdiv = 0x0,
+		.pclk_cdrex_ratio = 0x5,
+		.direct_cmd_msr = {
+			0x00020018, 0x00030000, 0x00010042, 0x00000d70
+		},
+		.timing_ref = 0x000000bb,
+		.timing_row = 0x8c36650e,
+		.timing_data = 0x3630580b,
+		.timing_power = 0x41000a44,
+		.phy0_dqs = 0x08080808,
+		.phy1_dqs = 0x08080808,
+		.phy0_dq = 0x08080808,
+		.phy1_dq = 0x08080808,
+		.phy0_tFS = 0x4,
+		.phy1_tFS = 0x4,
+		.phy0_pulld_dqs = 0xf,
+		.phy1_pulld_dqs = 0xf,
+
+		.lpddr3_ctrl_phy_reset = 0x1,
+		.ctrl_start_point = 0x10,
+		.ctrl_inc = 0x10,
+		.ctrl_start = 0x1,
+		.ctrl_dll_on = 0x1,
+		.ctrl_ref = 0x8,
+
+		.ctrl_force = 0x1a,
+		.ctrl_rdlat = 0x0b,
+		.ctrl_bstlen = 0x08,
+
+		.fp_resync = 0x8,
+		.iv_size = 0x7,
+		.dfi_init_start = 1,
+		.aref_en = 1,
+
+		.rd_fetch = 0x3,
+
+		.zq_mode_dds = 0x7,
+		.zq_mode_term = 0x1,
+		.zq_mode_noterm = 0,
+
+		/*
+		* Dynamic Clock: Always Running
+		* Memory Burst length: 8
+		* Number of chips: 1
+		* Memory Bus width: 32 bit
+		* Memory Type: DDR3
+		* Additional Latancy for PLL: 0 Cycle
+		*/
+		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+			DMC_MEMCONTROL_TP_DISABLE |
+			DMC_MEMCONTROL_DSREF_ENABLE |
+			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+			DMC_MEMCONTROL_NUM_CHIP_1 |
+			DMC_MEMCONTROL_BL_8 |
+			DMC_MEMCONTROL_PZQ_DISABLE |
+			DMC_MEMCONTROL_MRR_BYTE_7_0,
+		.memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
+			DMC_MEMCONFIGX_CHIP_COL_10 |
+			DMC_MEMCONFIGX_CHIP_ROW_15 |
+			DMC_MEMCONFIGX_CHIP_BANK_8,
+		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
+		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
+		.prechconfig_tp_cnt = 0xff,
+		.dpwrdn_cyc = 0xff,
+		.dsref_cyc = 0xffff,
+		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+			DMC_CONCONTROL_RD_FETCH_DISABLE |
+			DMC_CONCONTROL_EMPTY_DISABLE |
+			DMC_CONCONTROL_AREF_EN_DISABLE |
+			DMC_CONCONTROL_IO_PD_CON_DISABLE,
+		.dmc_channels = 2,
+		.chips_per_channel = 2,
+		.chips_to_configure = 1,
+		.send_zq_init = 1,
+		.impedance = IMP_OUTPUT_DRV_30_OHM,
+		.gate_leveling_enable = 0,
+	}, {
+		.mem_manuf = MEM_MANUF_SAMSUNG,
+		.mem_type = DDR_MODE_DDR3,
+		.frequency_mhz = 800,
+		.mpll_mdiv = 0xc8,
+		.mpll_pdiv = 0x3,
+		.mpll_sdiv = 0x0,
+		.cpll_mdiv = 0xde,
+		.cpll_pdiv = 0x4,
+		.cpll_sdiv = 0x2,
+		.gpll_mdiv = 0x215,
+		.gpll_pdiv = 0xc,
+		.gpll_sdiv = 0x1,
+		.epll_mdiv = 0x60,
+		.epll_pdiv = 0x3,
+		.epll_sdiv = 0x3,
+		.vpll_mdiv = 0x96,
+		.vpll_pdiv = 0x3,
+		.vpll_sdiv = 0x2,
+
+		.bpll_mdiv = 0x64,
+		.bpll_pdiv = 0x3,
+		.bpll_sdiv = 0x0,
+		.pclk_cdrex_ratio = 0x5,
+		.direct_cmd_msr = {
+			0x00020018, 0x00030000, 0x00010000, 0x00000d70
+		},
+		.timing_ref = 0x000000bb,
+		.timing_row = 0x8c36650e,
+		.timing_data = 0x3630580b,
+		.timing_power = 0x41000a44,
+		.phy0_dqs = 0x08080808,
+		.phy1_dqs = 0x08080808,
+		.phy0_dq = 0x08080808,
+		.phy1_dq = 0x08080808,
+		.phy0_tFS = 0x8,
+		.phy1_tFS = 0x8,
+		.phy0_pulld_dqs = 0xf,
+		.phy1_pulld_dqs = 0xf,
+
+		.lpddr3_ctrl_phy_reset = 0x1,
+		.ctrl_start_point = 0x10,
+		.ctrl_inc = 0x10,
+		.ctrl_start = 0x1,
+		.ctrl_dll_on = 0x1,
+		.ctrl_ref = 0x8,
+
+		.ctrl_force = 0x1a,
+		.ctrl_rdlat = 0x0b,
+		.ctrl_bstlen = 0x08,
+
+		.fp_resync = 0x8,
+		.iv_size = 0x7,
+		.dfi_init_start = 1,
+		.aref_en = 1,
+
+		.rd_fetch = 0x3,
+
+		.zq_mode_dds = 0x5,
+		.zq_mode_term = 0x1,
+		.zq_mode_noterm = 1,
+
+		/*
+		* Dynamic Clock: Always Running
+		* Memory Burst length: 8
+		* Number of chips: 1
+		* Memory Bus width: 32 bit
+		* Memory Type: DDR3
+		* Additional Latancy for PLL: 0 Cycle
+		*/
+		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+			DMC_MEMCONTROL_TP_DISABLE |
+			DMC_MEMCONTROL_DSREF_ENABLE |
+			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+			DMC_MEMCONTROL_NUM_CHIP_1 |
+			DMC_MEMCONTROL_BL_8 |
+			DMC_MEMCONTROL_PZQ_DISABLE |
+			DMC_MEMCONTROL_MRR_BYTE_7_0,
+		.memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
+			DMC_MEMCONFIGX_CHIP_COL_10 |
+			DMC_MEMCONFIGX_CHIP_ROW_15 |
+			DMC_MEMCONFIGX_CHIP_BANK_8,
+		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
+		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
+		.prechconfig_tp_cnt = 0xff,
+		.dpwrdn_cyc = 0xff,
+		.dsref_cyc = 0xffff,
+		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+			DMC_CONCONTROL_RD_FETCH_DISABLE |
+			DMC_CONCONTROL_EMPTY_DISABLE |
+			DMC_CONCONTROL_AREF_EN_DISABLE |
+			DMC_CONCONTROL_IO_PD_CON_DISABLE,
+		.dmc_channels = 2,
+		.chips_per_channel = 2,
+		.chips_to_configure = 1,
+		.send_zq_init = 1,
+		.impedance = IMP_OUTPUT_DRV_40_OHM,
+		.gate_leveling_enable = 1,
+	}
+#endif
+};
+
+/**
+ * Get the required memory type and speed (SPL version).
+ *
+ * In SPL we have no device tree, so we use the machine parameters
+ *
+ * @param mem_type	Returns memory type
+ * @param frequency_mhz	Returns memory speed in MHz
+ * @param arm_freq	Returns ARM clock speed in MHz
+ * @param mem_manuf	Return Memory Manufacturer name
+ */
+static void clock_get_mem_selection(enum ddr_mode *mem_type,
+		unsigned *frequency_mhz, unsigned *arm_freq,
+		enum mem_manuf *mem_manuf)
+{
+	struct spl_machine_param *params;
+
+	params = spl_get_machine_params();
+	*mem_type = params->mem_type;
+	*frequency_mhz = params->frequency_mhz;
+	*arm_freq = params->arm_freq_mhz;
+	*mem_manuf = params->mem_manuf;
+}
+
+/* Get the ratios for setting ARM clock */
+struct arm_clk_ratios *get_arm_ratios(void)
+{
+	struct arm_clk_ratios *arm_ratio;
+	enum ddr_mode mem_type;
+	enum mem_manuf mem_manuf;
+	unsigned frequency_mhz, arm_freq;
+	int i;
+
+	clock_get_mem_selection(&mem_type, &frequency_mhz,
+				&arm_freq, &mem_manuf);
+
+	for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
+		i++, arm_ratio++) {
+		if (arm_ratio->arm_freq_mhz == arm_freq)
+			return arm_ratio;
+	}
+
+	/* will hang if failed to find clock ratio */
+	while (1)
+		;
+
+	return NULL;
+}
+
+struct mem_timings *clock_get_mem_timings(void)
+{
+	struct mem_timings *mem;
+	enum ddr_mode mem_type;
+	enum mem_manuf mem_manuf;
+	unsigned frequency_mhz, arm_freq;
+	int i;
+
+	clock_get_mem_selection(&mem_type, &frequency_mhz,
+				&arm_freq, &mem_manuf);
+	for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
+	     i++, mem++) {
+		if (mem->mem_type == mem_type &&
+		    mem->frequency_mhz == frequency_mhz &&
+		    mem->mem_manuf == mem_manuf)
+			return mem;
+	}
+
+	/* will hang if failed to find memory timings */
+	while (1)
+		;
+
+	return NULL;
+}
+
+static void exynos5250_system_clock_init(void)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	struct mem_timings *mem;
+	struct arm_clk_ratios *arm_clk_ratio;
+	u32 val, tmp;
+
+	mem = clock_get_mem_timings();
+	arm_clk_ratio = get_arm_ratios();
+
+	clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
+	do {
+		val = readl(&clk->mux_stat_cpu);
+	} while ((val | MUX_APLL_SEL_MASK) != val);
+
+	clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK);
+	do {
+		val = readl(&clk->mux_stat_core1);
+	} while ((val | MUX_MPLL_SEL_MASK) != val);
+
+	clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK);
+	clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK);
+	clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK);
+	clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK);
+	tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
+		| MUX_GPLL_SEL_MASK;
+	do {
+		val = readl(&clk->mux_stat_top2);
+	} while ((val | tmp) != val);
+
+	clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK);
+	do {
+		val = readl(&clk->mux_stat_cdrex);
+	} while ((val | MUX_BPLL_SEL_MASK) != val);
+
+	/* PLL locktime */
+	writel(mem->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock);
+	writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock);
+	writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock);
+	writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock);
+	writel(mem->gpll_pdiv * PLL_X_LOCK_FACTOR, &clk->gpll_lock);
+	writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock);
+	writel(mem->vpll_pdiv * PLL_X_LOCK_FACTOR, &clk->vpll_lock);
+
+	writel(CLK_REG_DISABLE, &clk->pll_div2_sel);
+
+	writel(MUX_HPM_SEL_MASK, &clk->src_cpu);
+	do {
+		val = readl(&clk->mux_stat_cpu);
+	} while ((val | HPM_SEL_SCLK_MPLL) != val);
+
+	val = arm_clk_ratio->arm2_ratio << 28
+		| arm_clk_ratio->apll_ratio << 24
+		| arm_clk_ratio->pclk_dbg_ratio << 20
+		| arm_clk_ratio->atb_ratio << 16
+		| arm_clk_ratio->periph_ratio << 12
+		| arm_clk_ratio->acp_ratio << 8
+		| arm_clk_ratio->cpud_ratio << 4
+		| arm_clk_ratio->arm_ratio;
+	writel(val, &clk->div_cpu0);
+	do {
+		val = readl(&clk->div_stat_cpu0);
+	} while (0 != val);
+
+	writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
+	do {
+		val = readl(&clk->div_stat_cpu1);
+	} while (0 != val);
+
+	/* Set APLL */
+	writel(APLL_CON1_VAL, &clk->apll_con1);
+	val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
+			arm_clk_ratio->apll_sdiv);
+	writel(val, &clk->apll_con0);
+	while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0)
+		;
+
+	/* Set MPLL */
+	writel(MPLL_CON1_VAL, &clk->mpll_con1);
+	val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
+	writel(val, &clk->mpll_con0);
+	while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0)
+		;
+
+	/* Set BPLL */
+	writel(BPLL_CON1_VAL, &clk->bpll_con1);
+	val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
+	writel(val, &clk->bpll_con0);
+	while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0)
+		;
+
+	/* Set CPLL */
+	writel(CPLL_CON1_VAL, &clk->cpll_con1);
+	val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
+	writel(val, &clk->cpll_con0);
+	while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0)
+		;
+
+	/* Set GPLL */
+	writel(GPLL_CON1_VAL, &clk->gpll_con1);
+	val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
+	writel(val, &clk->gpll_con0);
+	while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0)
+		;
+
+	/* Set EPLL */
+	writel(EPLL_CON2_VAL, &clk->epll_con2);
+	writel(EPLL_CON1_VAL, &clk->epll_con1);
+	val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
+	writel(val, &clk->epll_con0);
+	while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0)
+		;
+
+	/* Set VPLL */
+	writel(VPLL_CON2_VAL, &clk->vpll_con2);
+	writel(VPLL_CON1_VAL, &clk->vpll_con1);
+	val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
+	writel(val, &clk->vpll_con0);
+	while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0)
+		;
+
+	writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
+	writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
+	while (readl(&clk->div_stat_core0) != 0)
+		;
+
+	writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
+	while (readl(&clk->div_stat_core1) != 0)
+		;
+
+	writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt);
+	while (readl(&clk->div_stat_sysrgt) != 0)
+		;
+
+	writel(CLK_DIV_ACP_VAL, &clk->div_acp);
+	while (readl(&clk->div_stat_acp) != 0)
+		;
+
+	writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft);
+	while (readl(&clk->div_stat_syslft) != 0)
+		;
+
+	writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+	writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+	writel(TOP2_VAL, &clk->src_top2);
+	writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
+
+	writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
+	while (readl(&clk->div_stat_top0))
+		;
+
+	writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
+	while (readl(&clk->div_stat_top1))
+		;
+
+	writel(CLK_SRC_LEX_VAL, &clk->src_lex);
+	while (1) {
+		val = readl(&clk->mux_stat_lex);
+		if (val == (val | 1))
+			break;
+	}
+
+	writel(CLK_DIV_LEX_VAL, &clk->div_lex);
+	while (readl(&clk->div_stat_lex))
+		;
+
+	writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
+	while (readl(&clk->div_stat_r0x))
+		;
+
+	writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
+	while (readl(&clk->div_stat_r0x))
+		;
+
+	writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
+	while (readl(&clk->div_stat_r1x))
+		;
+
+	writel(CLK_REG_DISABLE, &clk->src_cdrex);
+
+	writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
+	while (readl(&clk->div_stat_cdrex))
+		;
+
+	val = readl(&clk->src_cpu);
+	val |= CLK_SRC_CPU_VAL;
+	writel(val, &clk->src_cpu);
+
+	val = readl(&clk->src_top2);
+	val |= CLK_SRC_TOP2_VAL;
+	writel(val, &clk->src_top2);
+
+	val = readl(&clk->src_core1);
+	val |= CLK_SRC_CORE1_VAL;
+	writel(val, &clk->src_core1);
+
+	writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
+	writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
+	while (readl(&clk->div_stat_fsys0))
+		;
+
+	writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu);
+	writel(CLK_REG_DISABLE, &clk->clkout_cmu_core);
+	writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp);
+	writel(CLK_REG_DISABLE, &clk->clkout_cmu_top);
+	writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex);
+	writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x);
+	writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x);
+	writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex);
+
+	writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
+	writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
+
+	writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
+	writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
+	writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
+	writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
+
+	writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp);
+	writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp);
+	writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
+	writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
+	writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);
+
+	/* FIMD1 SRC CLK SELECTION */
+	writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0);
+
+	val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET
+		| MMC2_RATIO_VAL << MMC2_RATIO_OFFSET
+		| MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET
+		| MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
+	writel(val, &clk->div_fsys2);
+}
+
+static void exynos5420_system_clock_init(void)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	struct mem_timings *mem;
+	struct arm_clk_ratios *arm_clk_ratio;
+	u32 val;
+
+	mem = clock_get_mem_timings();
+	arm_clk_ratio = get_arm_ratios();
+
+	/* PLL locktime */
+	writel(arm_clk_ratio->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock);
+	writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock);
+	writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock);
+	writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock);
+	writel(mem->dpll_pdiv * PLL_LOCK_FACTOR, &clk->dpll_lock);
+	writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock);
+	writel(mem->vpll_pdiv * PLL_LOCK_FACTOR, &clk->vpll_lock);
+	writel(mem->ipll_pdiv * PLL_LOCK_FACTOR, &clk->ipll_lock);
+	writel(mem->spll_pdiv * PLL_LOCK_FACTOR, &clk->spll_lock);
+	writel(mem->kpll_pdiv * PLL_LOCK_FACTOR, &clk->kpll_lock);
+	writel(mem->rpll_pdiv * PLL_X_LOCK_FACTOR, &clk->rpll_lock);
+
+	setbits_le32(&clk->src_cpu, MUX_HPM_SEL_MASK);
+
+	writel(0, &clk->src_top6);
+
+	writel(0, &clk->src_cdrex);
+	writel(SRC_KFC_HPM_SEL, &clk->src_kfc);
+	writel(HPM_RATIO,  &clk->div_cpu1);
+	writel(CLK_DIV_CPU0_VAL,  &clk->div_cpu0);
+
+	/* switch A15 clock source to OSC clock before changing APLL */
+	clrbits_le32(&clk->src_cpu, APLL_FOUT);
+
+	/* Set APLL */
+	writel(APLL_CON1_VAL, &clk->apll_con1);
+	val = set_pll(arm_clk_ratio->apll_mdiv,
+		      arm_clk_ratio->apll_pdiv,
+		      arm_clk_ratio->apll_sdiv);
+	writel(val, &clk->apll_con0);
+	while ((readl(&clk->apll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* now it is safe to switch to APLL */
+	setbits_le32(&clk->src_cpu, APLL_FOUT);
+
+	writel(SRC_KFC_HPM_SEL, &clk->src_kfc);
+	writel(CLK_DIV_KFC_VAL, &clk->div_kfc0);
+
+	/* switch A7 clock source to OSC clock before changing KPLL */
+	clrbits_le32(&clk->src_kfc, KPLL_FOUT);
+
+	/* Set KPLL*/
+	writel(KPLL_CON1_VAL, &clk->kpll_con1);
+	val = set_pll(mem->kpll_mdiv, mem->kpll_pdiv, mem->kpll_sdiv);
+	writel(val, &clk->kpll_con0);
+	while ((readl(&clk->kpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* now it is safe to switch to KPLL */
+	setbits_le32(&clk->src_kfc, KPLL_FOUT);
+
+	/* Set MPLL */
+	writel(MPLL_CON1_VAL, &clk->mpll_con1);
+	val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
+	writel(val, &clk->mpll_con0);
+	while ((readl(&clk->mpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set DPLL */
+	writel(DPLL_CON1_VAL, &clk->dpll_con1);
+	val = set_pll(mem->dpll_mdiv, mem->dpll_pdiv, mem->dpll_sdiv);
+	writel(val, &clk->dpll_con0);
+	while ((readl(&clk->dpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set EPLL */
+	writel(EPLL_CON2_VAL, &clk->epll_con2);
+	writel(EPLL_CON1_VAL, &clk->epll_con1);
+	val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
+	writel(val, &clk->epll_con0);
+	while ((readl(&clk->epll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set CPLL */
+	writel(CPLL_CON1_VAL, &clk->cpll_con1);
+	val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
+	writel(val, &clk->cpll_con0);
+	while ((readl(&clk->cpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set IPLL */
+	writel(IPLL_CON1_VAL, &clk->ipll_con1);
+	val = set_pll(mem->ipll_mdiv, mem->ipll_pdiv, mem->ipll_sdiv);
+	writel(val, &clk->ipll_con0);
+	while ((readl(&clk->ipll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set VPLL */
+	writel(VPLL_CON1_VAL, &clk->vpll_con1);
+	val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
+	writel(val, &clk->vpll_con0);
+	while ((readl(&clk->vpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set BPLL */
+	writel(BPLL_CON1_VAL, &clk->bpll_con1);
+	val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
+	writel(val, &clk->bpll_con0);
+	while ((readl(&clk->bpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set SPLL */
+	writel(SPLL_CON1_VAL, &clk->spll_con1);
+	val = set_pll(mem->spll_mdiv, mem->spll_pdiv, mem->spll_sdiv);
+	writel(val, &clk->spll_con0);
+	while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set RPLL */
+	writel(RPLL_CON2_VAL, &clk->rpll_con2);
+	writel(RPLL_CON1_VAL, &clk->rpll_con1);
+	val = set_pll(mem->rpll_mdiv, mem->rpll_pdiv, mem->rpll_sdiv);
+	writel(val, &clk->rpll_con0);
+	while ((readl(&clk->rpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	writel(CLK_DIV_CDREX0_VAL, &clk->div_cdrex0);
+	writel(CLK_DIV_CDREX1_VAL, &clk->div_cdrex1);
+
+	writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+	writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+	writel(CLK_SRC_TOP2_VAL, &clk->src_top2);
+	writel(CLK_SRC_TOP7_VAL, &clk->src_top7);
+
+	writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
+	writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
+	writel(CLK_DIV_TOP2_VAL, &clk->div_top2);
+
+	writel(0, &clk->src_top10);
+	writel(0, &clk->src_top11);
+	writel(0, &clk->src_top12);
+
+	writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
+	writel(CLK_SRC_TOP4_VAL, &clk->src_top4);
+	writel(CLK_SRC_TOP5_VAL, &clk->src_top5);
+
+	/* DISP1 BLK CLK SELECTION */
+	writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp10);
+	writel(CLK_DIV_DISP1_0_VAL, &clk->div_disp10);
+
+	/* AUDIO BLK */
+	writel(AUDIO0_SEL_EPLL, &clk->src_mau);
+	writel(DIV_MAU_VAL, &clk->div_mau);
+
+	/* FSYS */
+	writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
+	writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
+	writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
+	writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
+
+	writel(CLK_SRC_ISP_VAL, &clk->src_isp);
+	writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
+	writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
+
+	writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
+	writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
+
+	writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
+	writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
+	writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
+	writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
+	writel(CLK_DIV_PERIC4_VAL, &clk->div_peric4);
+
+	writel(CLK_DIV_CPERI1_VAL, &clk->div_cperi1);
+
+	writel(CLK_DIV2_RATIO, &clk->clkdiv2_ratio);
+	writel(CLK_DIV4_RATIO, &clk->clkdiv4_ratio);
+	writel(CLK_DIV_G2D, &clk->div_g2d);
+
+	writel(CLK_SRC_TOP6_VAL, &clk->src_top6);
+	writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex);
+	writel(CLK_SRC_KFC_VAL, &clk->src_kfc);
+}
+
+void system_clock_init(void)
+{
+	if (proid_is_exynos542x())
+		exynos5420_system_clock_init();
+	else
+		exynos5250_system_clock_init();
+}
+
+void clock_init_dp_clock(void)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+
+	/* DP clock enable */
+	setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
+
+	/* We run DP at 267 Mhz */
+	setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
+}
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
+ */
+void emmc_boot_clk_div_set(void)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	unsigned int div_mmc;
+
+	div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
+	div_mmc |= FSYS1_MMC0_DIV_VAL;
+	writel(div_mmc, (unsigned int) &clk->div_fsys1);
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/common_setup.h b/roms/u-boot/arch/arm/mach-exynos/common_setup.h
new file mode 100644
index 000000000..4e3702b92
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/common_setup.h
@@ -0,0 +1,107 @@
+/*
+ * Common APIs for EXYNOS based board
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/system.h>
+
+#define DMC_OFFSET	0x10000
+
+/*
+ * Memory initialization
+ *
+ * @param reset     Reset PHY during initialization.
+ */
+void mem_ctrl_init(int reset);
+
+ /* System Clock initialization */
+void system_clock_init(void);
+
+/*
+ * Init subsystems according to the reset status
+ *
+ * @return 0 for a normal boot, non-zero for a resume
+ */
+int do_lowlevel_init(void);
+
+void sdelay(unsigned long);
+
+enum l2_cache_params {
+	CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0),
+	CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0),
+	CACHE_DISABLE_CLEAN_EVICT = (1 << 3),
+	CACHE_DATA_RAM_SETUP = (1 << 5),
+	CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6),
+	CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6),
+	CACHE_ENABLE_HAZARD_DETECT = (1 << 7),
+	CACHE_TAG_RAM_SETUP = (1 << 9),
+	CACHE_ECC_AND_PARITY = (1 << 21),
+	CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27)
+};
+
+
+#if !defined(CONFIG_SYS_L2CACHE_OFF) && defined(CONFIG_EXYNOS5420)
+/*
+ * Configure L2CTLR to get timings that keep us from hanging/crashing.
+ *
+ * Must be inline here since low_power_start() is called without a
+ * stack (!).
+ */
+static inline void configure_l2_ctlr(void)
+{
+	uint32_t val;
+
+	mrc_l2_ctlr(val);
+
+	val |= CACHE_TAG_RAM_SETUP |
+		CACHE_DATA_RAM_SETUP |
+		CACHE_TAG_RAM_LATENCY_2_CYCLES |
+		CACHE_DATA_RAM_LATENCY_2_CYCLES;
+
+	if (proid_is_exynos542x()) {
+		val |= CACHE_ECC_AND_PARITY |
+			CACHE_TAG_RAM_LATENCY_3_CYCLES |
+			CACHE_DATA_RAM_LATENCY_3_CYCLES;
+	}
+
+	mcr_l2_ctlr(val);
+}
+
+/*
+ * Configure L2ACTLR.
+ *
+ * Must be inline here since low_power_start() is called without a
+ * stack (!).
+ */
+static inline void configure_l2_actlr(void)
+{
+	uint32_t val;
+
+	if (proid_is_exynos542x()) {
+		mrc_l2_aux_ctlr(val);
+		val |= CACHE_ENABLE_FORCE_L2_LOGIC |
+			CACHE_DISABLE_CLEAN_EVICT;
+		mcr_l2_aux_ctlr(val);
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/config.mk b/roms/u-boot/arch/arm/mach-exynos/config.mk
new file mode 100644
index 000000000..59d332b70
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/config.mk
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) Albert ARIBAUD <albert.u.boot@aribaud.net>
+
+SPL_OBJCFLAGS += -j .machine_param
diff --git a/roms/u-boot/arch/arm/mach-exynos/dmc_common.c b/roms/u-boot/arch/arm/mach-exynos/dmc_common.c
new file mode 100644
index 000000000..44923dd55
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/dmc_common.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Mem setup common file for different types of DDR present on Exynos boards.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ */
+
+#include <common.h>
+#include <asm/arch/spl.h>
+
+#include "clock_init.h"
+#include "common_setup.h"
+#include "exynos5_setup.h"
+
+#define ZQ_INIT_TIMEOUT	10000
+
+int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16,
+			uint32_t *phy1_con16, uint32_t *phy0_con17,
+			uint32_t *phy1_con17)
+{
+	unsigned long val = 0;
+	int i;
+
+	/*
+	 * ZQ Calibration:
+	 * Select Driver Strength,
+	 * long calibration for manual calibration
+	 */
+	val = PHY_CON16_RESET_VAL;
+	val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
+	val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
+	val |= ZQ_CLK_DIV_EN;
+	writel(val, phy0_con16);
+	writel(val, phy1_con16);
+
+	/* Disable termination */
+	if (mem->zq_mode_noterm)
+		val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
+	writel(val, phy0_con16);
+	writel(val, phy1_con16);
+
+	/* ZQ_MANUAL_START: Enable */
+	val |= ZQ_MANUAL_STR;
+	writel(val, phy0_con16);
+	writel(val, phy1_con16);
+
+	/* ZQ_MANUAL_START: Disable */
+	val &= ~ZQ_MANUAL_STR;
+
+	/*
+	 * Since we are manaully calibrating the ZQ values,
+	 * we are looping for the ZQ_init to complete.
+	 */
+	i = ZQ_INIT_TIMEOUT;
+	while ((readl(phy0_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+		sdelay(100);
+		i--;
+	}
+	if (!i)
+		return -1;
+	writel(val, phy0_con16);
+
+	i = ZQ_INIT_TIMEOUT;
+	while ((readl(phy1_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+		sdelay(100);
+		i--;
+	}
+	if (!i)
+		return -1;
+	writel(val, phy1_con16);
+
+	return 0;
+}
+
+void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode mode)
+{
+	unsigned long val;
+
+	if (mode == DDR_MODE_DDR3) {
+		val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
+		writel(val, phycontrol0);
+	}
+
+	/* Update DLL Information: Force DLL Resyncronization */
+	val = readl(phycontrol0);
+	val |= FP_RSYNC;
+	writel(val, phycontrol0);
+
+	/* Reset Force DLL Resyncronization */
+	val = readl(phycontrol0);
+	val &= ~FP_RSYNC;
+	writel(val, phycontrol0);
+}
+
+void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd)
+{
+	int channel, chip;
+
+	for (channel = 0; channel < mem->dmc_channels; channel++) {
+		unsigned long mask;
+
+		mask = channel << DIRECT_CMD_CHANNEL_SHIFT;
+		for (chip = 0; chip < mem->chips_to_configure; chip++) {
+			int i;
+
+			mask |= chip << DIRECT_CMD_CHIP_SHIFT;
+
+			/* Sending NOP command */
+			writel(DIRECT_CMD_NOP | mask, directcmd);
+
+			/*
+			 * TODO(alim.akhtar@samsung.com): Do we need these
+			 * delays? This one and the next were not there for
+			 * DDR3.
+			 */
+			sdelay(0x10000);
+
+			/* Sending EMRS/MRS commands */
+			for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
+				writel(mem->direct_cmd_msr[i] | mask,
+				       directcmd);
+				sdelay(0x10000);
+			}
+
+			if (mem->send_zq_init) {
+				/* Sending ZQINIT command */
+				writel(DIRECT_CMD_ZQINIT | mask,
+				       directcmd);
+
+				sdelay(10000);
+			}
+		}
+	}
+}
+
+void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd)
+{
+	int channel, chip;
+
+	for (channel = 0; channel < mem->dmc_channels; channel++) {
+		unsigned long mask;
+
+		mask = channel << DIRECT_CMD_CHANNEL_SHIFT;
+		for (chip = 0; chip < mem->chips_per_channel; chip++) {
+			mask |= chip << DIRECT_CMD_CHIP_SHIFT;
+
+			/* PALL (all banks precharge) CMD */
+			writel(DIRECT_CMD_PALL | mask, directcmd);
+			sdelay(0x10000);
+		}
+	}
+}
+
+void mem_ctrl_init(int reset)
+{
+	struct spl_machine_param *param = spl_get_machine_params();
+	struct mem_timings *mem;
+	int ret;
+
+	mem = clock_get_mem_timings();
+
+	/* If there are any other memory variant, add their init call below */
+	if (param->mem_type == DDR_MODE_DDR3) {
+		ret = ddr3_mem_ctrl_init(mem, reset);
+		if (ret) {
+			/* will hang if failed to init memory control */
+			while (1)
+				;
+		}
+	} else {
+		/* will hang if unknow memory type  */
+		while (1)
+			;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/dmc_init_ddr3.c b/roms/u-boot/arch/arm/mach-exynos/dmc_init_ddr3.c
new file mode 100644
index 000000000..18c558f92
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/dmc_init_ddr3.c
@@ -0,0 +1,865 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * DDR3 mem setup file for board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/power.h>
+#include "common_setup.h"
+#include "exynos5_setup.h"
+#include "clock_init.h"
+
+#define TIMEOUT_US		10000
+#define NUM_BYTE_LANES		4
+#define DEFAULT_DQS		8
+#define DEFAULT_DQS_X4		((DEFAULT_DQS << 24) || (DEFAULT_DQS << 16) \
+				|| (DEFAULT_DQS << 8) || (DEFAULT_DQS << 0))
+
+#ifdef CONFIG_EXYNOS5250
+static void reset_phy_ctrl(void)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+
+	writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
+	writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
+}
+
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
+{
+	unsigned int val;
+	struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
+	struct exynos5_dmc *dmc;
+	int i;
+
+	phy0_ctrl = (struct exynos5_phy_control *)samsung_get_base_dmc_phy();
+	phy1_ctrl = (struct exynos5_phy_control *)(samsung_get_base_dmc_phy()
+							+ DMC_OFFSET);
+	dmc = (struct exynos5_dmc *)samsung_get_base_dmc_ctrl();
+
+	if (reset)
+		reset_phy_ctrl();
+
+	/* Set Impedance Output Driver */
+	val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) |
+		(mem->impedance << CA_CKE_DRVR_DS_OFFSET) |
+		(mem->impedance << CA_CS_DRVR_DS_OFFSET) |
+		(mem->impedance << CA_ADR_DRVR_DS_OFFSET);
+	writel(val, &phy0_ctrl->phy_con39);
+	writel(val, &phy1_ctrl->phy_con39);
+
+	/* Set Read Latency and Burst Length for PHY0 and PHY1 */
+	val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
+		(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
+	writel(val, &phy0_ctrl->phy_con42);
+	writel(val, &phy1_ctrl->phy_con42);
+
+	/* ZQ Calibration */
+	if (dmc_config_zq(mem, &phy0_ctrl->phy_con16, &phy1_ctrl->phy_con16,
+			  &phy0_ctrl->phy_con17, &phy1_ctrl->phy_con17))
+		return SETUP_ERR_ZQ_CALIBRATION_FAILURE;
+
+	/* DQ Signal */
+	writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14);
+	writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14);
+
+	writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
+		| (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT),
+		&dmc->concontrol);
+
+	update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
+
+	/* DQS Signal */
+	writel(mem->phy0_dqs, &phy0_ctrl->phy_con4);
+	writel(mem->phy1_dqs, &phy1_ctrl->phy_con4);
+
+	writel(mem->phy0_dq, &phy0_ctrl->phy_con6);
+	writel(mem->phy1_dq, &phy1_ctrl->phy_con6);
+
+	writel(mem->phy0_tFS, &phy0_ctrl->phy_con10);
+	writel(mem->phy1_tFS, &phy1_ctrl->phy_con10);
+
+	val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) |
+		(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
+		(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
+		(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
+	writel(val, &phy0_ctrl->phy_con12);
+	writel(val, &phy1_ctrl->phy_con12);
+
+	/* Start DLL locking */
+	writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
+	       &phy0_ctrl->phy_con12);
+	writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
+	       &phy1_ctrl->phy_con12);
+
+	update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
+
+	writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
+	       &dmc->concontrol);
+
+	/* Memory Channel Inteleaving Size */
+	writel(mem->iv_size, &dmc->ivcontrol);
+
+	writel(mem->memconfig, &dmc->memconfig0);
+	writel(mem->memconfig, &dmc->memconfig1);
+	writel(mem->membaseconfig0, &dmc->membaseconfig0);
+	writel(mem->membaseconfig1, &dmc->membaseconfig1);
+
+	/* Precharge Configuration */
+	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
+	       &dmc->prechconfig);
+
+	/* Power Down mode Configuration */
+	writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |
+		mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT,
+		&dmc->pwrdnconfig);
+
+	/* TimingRow, TimingData, TimingPower and Timingaref
+	 * values as per Memory AC parameters
+	 */
+	writel(mem->timing_ref, &dmc->timingref);
+	writel(mem->timing_row, &dmc->timingrow);
+	writel(mem->timing_data, &dmc->timingdata);
+	writel(mem->timing_power, &dmc->timingpower);
+
+	/* Send PALL command */
+	dmc_config_prech(mem, &dmc->directcmd);
+
+	/* Send NOP, MRS and ZQINIT commands */
+	dmc_config_mrs(mem, &dmc->directcmd);
+
+	if (mem->gate_leveling_enable) {
+		val = PHY_CON0_RESET_VAL;
+		val |= P0_CMD_EN;
+		writel(val, &phy0_ctrl->phy_con0);
+		writel(val, &phy1_ctrl->phy_con0);
+
+		val = PHY_CON2_RESET_VAL;
+		val |= INIT_DESKEW_EN;
+		writel(val, &phy0_ctrl->phy_con2);
+		writel(val, &phy1_ctrl->phy_con2);
+
+		val = PHY_CON0_RESET_VAL;
+		val |= P0_CMD_EN;
+		val |= BYTE_RDLVL_EN;
+		writel(val, &phy0_ctrl->phy_con0);
+		writel(val, &phy1_ctrl->phy_con0);
+
+		val = (mem->ctrl_start_point <<
+				PHY_CON12_CTRL_START_POINT_SHIFT) |
+			(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
+			(mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
+			(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
+			(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
+		writel(val, &phy0_ctrl->phy_con12);
+		writel(val, &phy1_ctrl->phy_con12);
+
+		val = PHY_CON2_RESET_VAL;
+		val |= INIT_DESKEW_EN;
+		val |= RDLVL_GATE_EN;
+		writel(val, &phy0_ctrl->phy_con2);
+		writel(val, &phy1_ctrl->phy_con2);
+
+		val = PHY_CON0_RESET_VAL;
+		val |= P0_CMD_EN;
+		val |= BYTE_RDLVL_EN;
+		val |= CTRL_SHGATE;
+		writel(val, &phy0_ctrl->phy_con0);
+		writel(val, &phy1_ctrl->phy_con0);
+
+		val = PHY_CON1_RESET_VAL;
+		val &= ~(CTRL_GATEDURADJ_MASK);
+		writel(val, &phy0_ctrl->phy_con1);
+		writel(val, &phy1_ctrl->phy_con1);
+
+		writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config);
+		i = TIMEOUT_US;
+		while ((readl(&dmc->phystatus) &
+			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
+			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
+			/*
+			 * TODO(waihong): Comment on how long this take to
+			 * timeout
+			 */
+			sdelay(100);
+			i--;
+		}
+		if (!i)
+			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
+		writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config);
+
+		writel(0, &phy0_ctrl->phy_con14);
+		writel(0, &phy1_ctrl->phy_con14);
+
+		val = (mem->ctrl_start_point <<
+				PHY_CON12_CTRL_START_POINT_SHIFT) |
+			(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
+			(mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
+			(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
+			(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
+			(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
+		writel(val, &phy0_ctrl->phy_con12);
+		writel(val, &phy1_ctrl->phy_con12);
+
+		update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
+	}
+
+	/* Send PALL command */
+	dmc_config_prech(mem, &dmc->directcmd);
+
+	writel(mem->memcontrol, &dmc->memcontrol);
+
+	/* Set DMC Concontrol and enable auto-refresh counter */
+	writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
+		| (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_EXYNOS5420
+/**
+ * RAM address to use in the test.
+ *
+ * We'll use 4 words at this address and 4 at this address + 0x80 (Ares
+ * interleaves channels every 128 bytes).  This will allow us to evaluate all of
+ * the chips in a 1 chip per channel (2GB) system and half the chips in a 2
+ * chip per channel (4GB) system.  We can't test the 2nd chip since we need to
+ * do tests before the 2nd chip is enabled.  Looking at the 2nd chip isn't
+ * critical because the 1st and 2nd chip have very similar timings (they'd
+ * better have similar timings, since there's only a single adjustment that is
+ * shared by both chips).
+ */
+const unsigned int test_addr = CONFIG_SYS_SDRAM_BASE;
+
+/* Test pattern with which RAM will be tested */
+static const unsigned int test_pattern[] = {
+	0x5a5a5a5a,
+	0xa5a5a5a5,
+	0xf0f0f0f0,
+	0x0f0f0f0f,
+};
+
+/**
+ * This function is a test vector for sw read leveling,
+ * it compares the read data with the written data.
+ *
+ * @param ch			DMC channel number
+ * @param byte_lane		which DQS byte offset,
+ *				possible values are 0,1,2,3
+ * @return			TRUE if memory was good, FALSE if not.
+ */
+static bool dmc_valid_window_test_vector(int ch, int byte_lane)
+{
+	unsigned int read_data;
+	unsigned int mask;
+	int i;
+
+	mask = 0xFF << (8 * byte_lane);
+
+	for (i = 0; i < ARRAY_SIZE(test_pattern); i++) {
+		read_data = readl(test_addr + i * 4 + ch * 0x80);
+		if ((read_data & mask) != (test_pattern[i] & mask))
+			return false;
+	}
+
+	return true;
+}
+
+/**
+ * This function returns current read offset value.
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ */
+static unsigned int dmc_get_read_offset_value(struct exynos5420_phy_control
+					       *phy_ctrl)
+{
+	return readl(&phy_ctrl->phy_con4);
+}
+
+/**
+ * This function performs resync, so that slave DLL is updated.
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ */
+static void ddr_phy_set_do_resync(struct exynos5420_phy_control *phy_ctrl)
+{
+	setbits_le32(&phy_ctrl->phy_con10, PHY_CON10_CTRL_OFFSETR3);
+	clrbits_le32(&phy_ctrl->phy_con10, PHY_CON10_CTRL_OFFSETR3);
+}
+
+/**
+ * This function sets read offset value register with 'offset'.
+ *
+ * ...we also call call ddr_phy_set_do_resync().
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ * @param offset	offset to read DQS
+ */
+static void dmc_set_read_offset_value(struct exynos5420_phy_control *phy_ctrl,
+				      unsigned int offset)
+{
+	writel(offset, &phy_ctrl->phy_con4);
+	ddr_phy_set_do_resync(phy_ctrl);
+}
+
+/**
+ * Convert a 2s complement byte to a byte with a sign bit.
+ *
+ * NOTE: you shouldn't use normal math on the number returned by this function.
+ *   As an example, -10 = 0xf6.  After this function -10 = 0x8a.  If you wanted
+ *   to do math and get the average of 10 and -10 (should be 0):
+ *     0x8a + 0xa = 0x94 (-108)
+ *     0x94 / 2   = 0xca (-54)
+ *   ...and 0xca = sign bit plus 0x4a, or -74
+ *
+ * Also note that you lose the ability to represent -128 since there are two
+ * representations of 0.
+ *
+ * @param b	The byte to convert in two's complement.
+ * @return	The 7-bit value + sign bit.
+ */
+
+unsigned char make_signed_byte(signed char b)
+{
+	if (b < 0)
+		return 0x80 | -b;
+	else
+		return b;
+}
+
+/**
+ * Test various shifts starting at 'start' and going to 'end'.
+ *
+ * For each byte lane, we'll walk through shift starting at 'start' and going
+ * to 'end' (inclusive).  When we are finally able to read the test pattern
+ * we'll store the value in the results array.
+ *
+ * @param phy_ctrl		pointer to the current phy controller
+ * @param ch			channel number
+ * @param start			the start shift.  -127 to 127
+ * @param end			the end shift.  -127 to 127
+ * @param results		we'll store results for each byte lane.
+ */
+
+void test_shifts(struct exynos5420_phy_control *phy_ctrl, int ch,
+		 int start, int end, int results[NUM_BYTE_LANES])
+{
+	int incr = (start < end) ? 1 : -1;
+	int byte_lane;
+
+	for (byte_lane = 0; byte_lane < NUM_BYTE_LANES; byte_lane++) {
+		int shift;
+
+		dmc_set_read_offset_value(phy_ctrl, DEFAULT_DQS_X4);
+		results[byte_lane] = DEFAULT_DQS;
+
+		for (shift = start; shift != (end + incr); shift += incr) {
+			unsigned int byte_offsetr;
+			unsigned int offsetr;
+
+			byte_offsetr = make_signed_byte(shift);
+
+			offsetr = dmc_get_read_offset_value(phy_ctrl);
+			offsetr &= ~(0xFF << (8 * byte_lane));
+			offsetr |= (byte_offsetr << (8 * byte_lane));
+			dmc_set_read_offset_value(phy_ctrl, offsetr);
+
+			if (dmc_valid_window_test_vector(ch, byte_lane)) {
+				results[byte_lane] = shift;
+				break;
+			}
+		}
+	}
+}
+
+/**
+ * This function performs SW read leveling to compensate DQ-DQS skew at
+ * receiver it first finds the optimal read offset value on each DQS
+ * then applies the value to PHY.
+ *
+ * Read offset value has its min margin and max margin. If read offset
+ * value exceeds its min or max margin, read data will have corruption.
+ * To avoid this we are doing sw read leveling.
+ *
+ * SW read leveling is:
+ * 1> Finding offset value's left_limit and right_limit
+ * 2> and calculate its center value
+ * 3> finally programs that center value to PHY
+ * 4> then PHY gets its optimal offset value.
+ *
+ * @param phy_ctrl		pointer to the current phy controller
+ * @param ch			channel number
+ * @param coarse_lock_val	The coarse lock value read from PHY_CON13.
+ *				(0 - 0x7f)
+ */
+static void software_find_read_offset(struct exynos5420_phy_control *phy_ctrl,
+				      int ch, unsigned int coarse_lock_val)
+{
+	unsigned int offsetr_cent;
+	int byte_lane;
+	int left_limit;
+	int right_limit;
+	int left[NUM_BYTE_LANES];
+	int right[NUM_BYTE_LANES];
+	int i;
+
+	/* Fill the memory with test patterns */
+	for (i = 0; i < ARRAY_SIZE(test_pattern); i++)
+		writel(test_pattern[i], test_addr + i * 4 + ch * 0x80);
+
+	/* Figure out the limits we'll test with; keep -127 < limit < 127 */
+	left_limit = DEFAULT_DQS - coarse_lock_val;
+	right_limit = DEFAULT_DQS + coarse_lock_val;
+	if (right_limit > 127)
+		right_limit = 127;
+
+	/* Fill in the location where reads were OK from left and right */
+	test_shifts(phy_ctrl, ch, left_limit, right_limit, left);
+	test_shifts(phy_ctrl, ch, right_limit, left_limit, right);
+
+	/* Make a final value by taking the center between the left and right */
+	offsetr_cent = 0;
+	for (byte_lane = 0; byte_lane < NUM_BYTE_LANES; byte_lane++) {
+		int temp_center;
+		unsigned int vmwc;
+
+		temp_center = (left[byte_lane] + right[byte_lane]) / 2;
+		vmwc = make_signed_byte(temp_center);
+		offsetr_cent |= vmwc << (8 * byte_lane);
+	}
+	dmc_set_read_offset_value(phy_ctrl, offsetr_cent);
+}
+
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	struct exynos5420_power *power =
+		(struct exynos5420_power *)samsung_get_base_power();
+	struct exynos5420_phy_control *phy0_ctrl, *phy1_ctrl;
+	struct exynos5420_dmc *drex0, *drex1;
+	struct exynos5420_tzasc *tzasc0, *tzasc1;
+	struct exynos5_power *pmu;
+	uint32_t val, n_lock_r, n_lock_w_phy0, n_lock_w_phy1;
+	uint32_t lock0_info, lock1_info;
+	int chip;
+	int i;
+
+	phy0_ctrl = (struct exynos5420_phy_control *)samsung_get_base_dmc_phy();
+	phy1_ctrl = (struct exynos5420_phy_control *)(samsung_get_base_dmc_phy()
+							+ DMC_OFFSET);
+	drex0 = (struct exynos5420_dmc *)samsung_get_base_dmc_ctrl();
+	drex1 = (struct exynos5420_dmc *)(samsung_get_base_dmc_ctrl()
+							+ DMC_OFFSET);
+	tzasc0 = (struct exynos5420_tzasc *)samsung_get_base_dmc_tzasc();
+	tzasc1 = (struct exynos5420_tzasc *)(samsung_get_base_dmc_tzasc()
+							+ DMC_OFFSET);
+	pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE;
+
+	if (CONFIG_NR_DRAM_BANKS > 4) {
+		/* Need both controllers. */
+		mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_2;
+		mem->chips_per_channel = 2;
+		mem->chips_to_configure = 2;
+	} else {
+		/* 2GB requires a single controller */
+		mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_1;
+	}
+
+	/* Enable PAUSE for DREX */
+	setbits_le32(&clk->pause, ENABLE_BIT);
+
+	/* Enable BYPASS mode */
+	setbits_le32(&clk->bpll_con1, BYPASS_EN);
+
+	writel(MUX_BPLL_SEL_FOUTBPLL, &clk->src_cdrex);
+	do {
+		val = readl(&clk->mux_stat_cdrex);
+		val &= BPLL_SEL_MASK;
+	} while (val != FOUTBPLL);
+
+	clrbits_le32(&clk->bpll_con1, BYPASS_EN);
+
+	/* Specify the DDR memory type as DDR3 */
+	val = readl(&phy0_ctrl->phy_con0);
+	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
+	val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
+	writel(val, &phy0_ctrl->phy_con0);
+
+	val = readl(&phy1_ctrl->phy_con0);
+	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
+	val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
+	writel(val, &phy1_ctrl->phy_con0);
+
+	/* Set Read Latency and Burst Length for PHY0 and PHY1 */
+	val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
+		(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
+	writel(val, &phy0_ctrl->phy_con42);
+	writel(val, &phy1_ctrl->phy_con42);
+
+	val = readl(&phy0_ctrl->phy_con26);
+	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
+	val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
+	writel(val, &phy0_ctrl->phy_con26);
+
+	val = readl(&phy1_ctrl->phy_con26);
+	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
+	val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
+	writel(val, &phy1_ctrl->phy_con26);
+
+	/*
+	 * Set Driver strength for CK, CKE, CS & CA to 0x7
+	 * Set Driver strength for Data Slice 0~3 to 0x7
+	 */
+	val = (0x7 << CA_CK_DRVR_DS_OFFSET) | (0x7 << CA_CKE_DRVR_DS_OFFSET) |
+		(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET);
+	val |= (0x7 << DA_3_DS_OFFSET) | (0x7 << DA_2_DS_OFFSET) |
+		(0x7 << DA_1_DS_OFFSET) | (0x7 << DA_0_DS_OFFSET);
+	writel(val, &phy0_ctrl->phy_con39);
+	writel(val, &phy1_ctrl->phy_con39);
+
+	/* ZQ Calibration */
+	if (dmc_config_zq(mem, &phy0_ctrl->phy_con16, &phy1_ctrl->phy_con16,
+			  &phy0_ctrl->phy_con17, &phy1_ctrl->phy_con17))
+		return SETUP_ERR_ZQ_CALIBRATION_FAILURE;
+
+	clrbits_le32(&phy0_ctrl->phy_con16, ZQ_CLK_DIV_EN);
+	clrbits_le32(&phy1_ctrl->phy_con16, ZQ_CLK_DIV_EN);
+
+	/* DQ Signal */
+	val = readl(&phy0_ctrl->phy_con14);
+	val |= mem->phy0_pulld_dqs;
+	writel(val, &phy0_ctrl->phy_con14);
+	val = readl(&phy1_ctrl->phy_con14);
+	val |= mem->phy1_pulld_dqs;
+	writel(val, &phy1_ctrl->phy_con14);
+
+	val = MEM_TERM_EN | PHY_TERM_EN;
+	writel(val, &drex0->phycontrol0);
+	writel(val, &drex1->phycontrol0);
+
+	writel(mem->concontrol |
+		(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
+		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
+		&drex0->concontrol);
+	writel(mem->concontrol |
+		(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
+		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
+		&drex1->concontrol);
+
+	do {
+		val = readl(&drex0->phystatus);
+	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
+	do {
+		val = readl(&drex1->phystatus);
+	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
+
+	clrbits_le32(&drex0->concontrol, DFI_INIT_START);
+	clrbits_le32(&drex1->concontrol, DFI_INIT_START);
+
+	update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3);
+	update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3);
+
+	/*
+	 * Set Base Address:
+	 * 0x2000_0000 ~ 0x5FFF_FFFF
+	 * 0x6000_0000 ~ 0x9FFF_FFFF
+	 */
+	/* MEMBASECONFIG0 */
+	val = DMC_MEMBASECONFIGX_CHIP_BASE(DMC_CHIP_BASE_0) |
+		DMC_MEMBASECONFIGX_CHIP_MASK(DMC_CHIP_MASK);
+	writel(val, &tzasc0->membaseconfig0);
+	writel(val, &tzasc1->membaseconfig0);
+
+	/* MEMBASECONFIG1 */
+	val = DMC_MEMBASECONFIGX_CHIP_BASE(DMC_CHIP_BASE_1) |
+		DMC_MEMBASECONFIGX_CHIP_MASK(DMC_CHIP_MASK);
+	writel(val, &tzasc0->membaseconfig1);
+	writel(val, &tzasc1->membaseconfig1);
+
+	/*
+	 * Memory Channel Inteleaving Size
+	 * Ares Channel interleaving = 128 bytes
+	 */
+	/* MEMCONFIG0/1 */
+	writel(mem->memconfig, &tzasc0->memconfig0);
+	writel(mem->memconfig, &tzasc1->memconfig0);
+	writel(mem->memconfig, &tzasc0->memconfig1);
+	writel(mem->memconfig, &tzasc1->memconfig1);
+
+	/* Precharge Configuration */
+	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
+	       &drex0->prechconfig0);
+	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
+	       &drex1->prechconfig0);
+
+	/*
+	 * TimingRow, TimingData, TimingPower and Timingaref
+	 * values as per Memory AC parameters
+	 */
+	writel(mem->timing_ref, &drex0->timingref);
+	writel(mem->timing_ref, &drex1->timingref);
+	writel(mem->timing_row, &drex0->timingrow0);
+	writel(mem->timing_row, &drex1->timingrow0);
+	writel(mem->timing_data, &drex0->timingdata0);
+	writel(mem->timing_data, &drex1->timingdata0);
+	writel(mem->timing_power, &drex0->timingpower0);
+	writel(mem->timing_power, &drex1->timingpower0);
+
+	if (reset) {
+		/*
+		 * Send NOP, MRS and ZQINIT commands
+		 * Sending MRS command will reset the DRAM. We should not be
+		 * resetting the DRAM after resume, this will lead to memory
+		 * corruption as DRAM content is lost after DRAM reset
+		 */
+		dmc_config_mrs(mem, &drex0->directcmd);
+		dmc_config_mrs(mem, &drex1->directcmd);
+	}
+
+	/*
+	 * Get PHY_CON13 from both phys.  Gate CLKM around reading since
+	 * PHY_CON13 is glitchy when CLKM is running.  We're paranoid and
+	 * wait until we get a "fine lock", though a coarse lock is probably
+	 * OK (we only use the coarse numbers below).  We try to gate the
+	 * clock for as short a time as possible in case SDRAM is somehow
+	 * sensitive.  sdelay(10) in the loop is arbitrary to make sure
+	 * there is some time for PHY_CON13 to get updated.  In practice
+	 * no delay appears to be needed.
+	 */
+	val = readl(&clk->gate_bus_cdrex);
+	while (true) {
+		writel(val & ~0x1, &clk->gate_bus_cdrex);
+		lock0_info = readl(&phy0_ctrl->phy_con13);
+		writel(val, &clk->gate_bus_cdrex);
+
+		if ((lock0_info & CTRL_FINE_LOCKED) == CTRL_FINE_LOCKED)
+			break;
+
+		sdelay(10);
+	}
+	while (true) {
+		writel(val & ~0x2, &clk->gate_bus_cdrex);
+		lock1_info = readl(&phy1_ctrl->phy_con13);
+		writel(val, &clk->gate_bus_cdrex);
+
+		if ((lock1_info & CTRL_FINE_LOCKED) == CTRL_FINE_LOCKED)
+			break;
+
+		sdelay(10);
+	}
+
+	if (!reset) {
+		/*
+		 * During Suspend-Resume & S/W-Reset, as soon as PMU releases
+		 * pad retention, CKE goes high. This causes memory contents
+		 * not to be retained during DRAM initialization. Therfore,
+		 * there is a new control register(0x100431e8[28]) which lets us
+		 * release pad retention and retain the memory content until the
+		 * initialization is complete.
+		 */
+		writel(PAD_RETENTION_DRAM_COREBLK_VAL,
+		       &power->pad_retention_dram_coreblk_option);
+		do {
+			val = readl(&power->pad_retention_dram_status);
+		} while (val != 0x1);
+
+		/*
+		 * CKE PAD retention disables DRAM self-refresh mode.
+		 * Send auto refresh command for DRAM refresh.
+		 */
+		for (i = 0; i < 128; i++) {
+			for (chip = 0; chip < mem->chips_to_configure; chip++) {
+				writel(DIRECT_CMD_REFA |
+				       (chip << DIRECT_CMD_CHIP_SHIFT),
+				       &drex0->directcmd);
+				writel(DIRECT_CMD_REFA |
+				       (chip << DIRECT_CMD_CHIP_SHIFT),
+				       &drex1->directcmd);
+			}
+		}
+	}
+
+	if (mem->gate_leveling_enable) {
+		writel(PHY_CON0_RESET_VAL, &phy0_ctrl->phy_con0);
+		writel(PHY_CON0_RESET_VAL, &phy1_ctrl->phy_con0);
+
+		setbits_le32(&phy0_ctrl->phy_con0, P0_CMD_EN);
+		setbits_le32(&phy1_ctrl->phy_con0, P0_CMD_EN);
+
+		val = PHY_CON2_RESET_VAL;
+		val |= INIT_DESKEW_EN;
+		writel(val, &phy0_ctrl->phy_con2);
+		writel(val, &phy1_ctrl->phy_con2);
+
+		val =  readl(&phy0_ctrl->phy_con1);
+		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
+		writel(val, &phy0_ctrl->phy_con1);
+
+		val =  readl(&phy1_ctrl->phy_con1);
+		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
+		writel(val, &phy1_ctrl->phy_con1);
+
+		n_lock_w_phy0 = (lock0_info & CTRL_LOCK_COARSE_MASK) >> 2;
+		n_lock_r = readl(&phy0_ctrl->phy_con12);
+		n_lock_r &= ~CTRL_DLL_ON;
+		n_lock_r |= n_lock_w_phy0;
+		writel(n_lock_r, &phy0_ctrl->phy_con12);
+
+		n_lock_w_phy1 = (lock1_info & CTRL_LOCK_COARSE_MASK) >> 2;
+		n_lock_r = readl(&phy1_ctrl->phy_con12);
+		n_lock_r &= ~CTRL_DLL_ON;
+		n_lock_r |= n_lock_w_phy1;
+		writel(n_lock_r, &phy1_ctrl->phy_con12);
+
+		val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
+		for (chip = 0; chip < mem->chips_to_configure; chip++) {
+			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+			       &drex0->directcmd);
+			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+			       &drex1->directcmd);
+		}
+
+		setbits_le32(&phy0_ctrl->phy_con2, RDLVL_GATE_EN);
+		setbits_le32(&phy1_ctrl->phy_con2, RDLVL_GATE_EN);
+
+		setbits_le32(&phy0_ctrl->phy_con0, CTRL_SHGATE);
+		setbits_le32(&phy1_ctrl->phy_con0, CTRL_SHGATE);
+
+		val = readl(&phy0_ctrl->phy_con1);
+		val &= ~(CTRL_GATEDURADJ_MASK);
+		writel(val, &phy0_ctrl->phy_con1);
+
+		val = readl(&phy1_ctrl->phy_con1);
+		val &= ~(CTRL_GATEDURADJ_MASK);
+		writel(val, &phy1_ctrl->phy_con1);
+
+		writel(CTRL_RDLVL_GATE_ENABLE, &drex0->rdlvl_config);
+		i = TIMEOUT_US;
+		while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) !=
+			RDLVL_COMPLETE_CHO) && (i > 0)) {
+			/*
+			 * TODO(waihong): Comment on how long this take to
+			 * timeout
+			 */
+			sdelay(100);
+			i--;
+		}
+		if (!i)
+			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
+		writel(CTRL_RDLVL_GATE_DISABLE, &drex0->rdlvl_config);
+
+		writel(CTRL_RDLVL_GATE_ENABLE, &drex1->rdlvl_config);
+		i = TIMEOUT_US;
+		while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) !=
+			RDLVL_COMPLETE_CHO) && (i > 0)) {
+			/*
+			 * TODO(waihong): Comment on how long this take to
+			 * timeout
+			 */
+			sdelay(100);
+			i--;
+		}
+		if (!i)
+			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
+		writel(CTRL_RDLVL_GATE_DISABLE, &drex1->rdlvl_config);
+
+		writel(0, &phy0_ctrl->phy_con14);
+		writel(0, &phy1_ctrl->phy_con14);
+
+		val = (0x3 << DIRECT_CMD_BANK_SHIFT);
+		for (chip = 0; chip < mem->chips_to_configure; chip++) {
+			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+			       &drex0->directcmd);
+			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+			       &drex1->directcmd);
+		}
+
+		/* Common Settings for Leveling */
+		val = PHY_CON12_RESET_VAL;
+		writel((val + n_lock_w_phy0), &phy0_ctrl->phy_con12);
+		writel((val + n_lock_w_phy1), &phy1_ctrl->phy_con12);
+
+		setbits_le32(&phy0_ctrl->phy_con2, DLL_DESKEW_EN);
+		setbits_le32(&phy1_ctrl->phy_con2, DLL_DESKEW_EN);
+	}
+
+	/*
+	 * Do software read leveling
+	 *
+	 * Do this before we turn on auto refresh since the auto refresh can
+	 * be in conflict with the resync operation that's part of setting
+	 * read leveling.
+	 */
+	if (!reset) {
+		/* restore calibrated value after resume */
+		dmc_set_read_offset_value(phy0_ctrl, readl(&pmu->pmu_spare1));
+		dmc_set_read_offset_value(phy1_ctrl, readl(&pmu->pmu_spare2));
+	} else {
+		software_find_read_offset(phy0_ctrl, 0,
+					  CTRL_LOCK_COARSE(lock0_info));
+		software_find_read_offset(phy1_ctrl, 1,
+					  CTRL_LOCK_COARSE(lock1_info));
+		/* save calibrated value to restore after resume */
+		writel(dmc_get_read_offset_value(phy0_ctrl), &pmu->pmu_spare1);
+		writel(dmc_get_read_offset_value(phy1_ctrl), &pmu->pmu_spare2);
+	}
+
+	/* Send PALL command */
+	dmc_config_prech(mem, &drex0->directcmd);
+	dmc_config_prech(mem, &drex1->directcmd);
+
+	writel(mem->memcontrol, &drex0->memcontrol);
+	writel(mem->memcontrol, &drex1->memcontrol);
+
+	/*
+	 * Set DMC Concontrol: Enable auto-refresh counter, provide
+	 * read data fetch cycles and enable DREX auto set powerdown
+	 * for input buffer of I/O in none read memory state.
+	 */
+	writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
+		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
+		DMC_CONCONTROL_IO_PD_CON(0x2),
+		&drex0->concontrol);
+	writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
+		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
+		DMC_CONCONTROL_IO_PD_CON(0x2),
+		&drex1->concontrol);
+
+	/*
+	 * Enable Clock Gating Control for DMC
+	 * this saves around 25 mw dmc power as compared to the power
+	 * consumption without these bits enabled
+	 */
+	setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
+	setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);
+
+	/*
+	 * As per Exynos5800 UM ver 0.00 section 17.13.2.1
+	 * CONCONTROL register bit 3 [update_mode], Exynos5800 does not
+	 * support the PHY initiated update. And it is recommended to set
+	 * this field to 1'b1 during initialization
+	 *
+	 * When we apply PHY-initiated mode, DLL lock value is determined
+	 * once at DMC init time and not updated later when we change the MIF
+	 * voltage based on ASV group in kernel. Applying MC-initiated mode
+	 * makes sure that DLL tracing is ON so that silicon is able to
+	 * compensate the voltage variation.
+	 */
+	val = readl(&drex0->concontrol);
+	val |= CONCONTROL_UPDATE_MODE;
+	writel(val, &drex0->concontrol);
+	val = readl(&drex1->concontrol);
+	val |= CONCONTROL_UPDATE_MODE;
+	writel(val, &drex1->concontrol);
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/dmc_init_exynos4.c b/roms/u-boot/arch/arm/mach-exynos/dmc_init_exynos4.c
new file mode 100644
index 000000000..ecddc7268
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/dmc_init_exynos4.c
@@ -0,0 +1,213 @@
+/*
+ * Memory setup for board based on EXYNOS4210
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/dmc.h>
+#include "common_setup.h"
+#include "exynos4_setup.h"
+
+struct mem_timings mem = {
+	.direct_cmd_msr = {
+		DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4
+	},
+	.timingref = TIMINGREF_VAL,
+	.timingrow = TIMINGROW_VAL,
+	.timingdata = TIMINGDATA_VAL,
+	.timingpower = TIMINGPOWER_VAL,
+	.zqcontrol = ZQ_CONTROL_VAL,
+	.control0 = CONTROL0_VAL,
+	.control1 = CONTROL1_VAL,
+	.control2 = CONTROL2_VAL,
+	.concontrol = CONCONTROL_VAL,
+	.prechconfig = PRECHCONFIG,
+	.memcontrol = MEMCONTROL_VAL,
+	.memconfig0 = MEMCONFIG0_VAL,
+	.memconfig1 = MEMCONFIG1_VAL,
+	.dll_resync = FORCE_DLL_RESYNC,
+	.dll_on = DLL_CONTROL_ON,
+};
+static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc)
+{
+	if (ctrl_no) {
+		writel((mem.control1 | (1 << mem.dll_resync)),
+		       &dmc->phycontrol1);
+		writel((mem.control1 | (0 << mem.dll_resync)),
+		       &dmc->phycontrol1);
+	} else {
+		writel((mem.control0 | (0 << mem.dll_on)),
+		       &dmc->phycontrol0);
+		writel((mem.control0 | (1 << mem.dll_on)),
+		       &dmc->phycontrol0);
+	}
+}
+
+static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip)
+{
+	int i;
+	unsigned long mask = 0;
+
+	if (chip)
+		mask = DIRECT_CMD_CHIP1_SHIFT;
+
+	for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
+		writel(mem.direct_cmd_msr[i] | mask,
+		       &dmc->directcmd);
+	}
+}
+
+static void dmc_init(struct exynos4_dmc *dmc)
+{
+	/*
+	 * DLL Parameter Setting:
+	 * Termination: Enable R/W
+	 * Phase Delay for DQS Cleaning: 180' Shift
+	 */
+	writel(mem.control1, &dmc->phycontrol1);
+
+	/*
+	 * ZQ Calibration
+	 * Termination: Disable
+	 * Auto Calibration Start: Enable
+	 */
+	writel(mem.zqcontrol, &dmc->phyzqcontrol);
+	sdelay(0x100000);
+
+	/*
+	 * Update DLL Information:
+	 * Force DLL Resyncronization
+	 */
+	phy_control_reset(1, dmc);
+	phy_control_reset(0, dmc);
+
+	/* Set DLL Parameters */
+	writel(mem.control1, &dmc->phycontrol1);
+
+	/* DLL Start */
+	writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0);
+
+	writel(mem.control2, &dmc->phycontrol2);
+
+	/* Set Clock Ratio of Bus clock to Memory Clock */
+	writel(mem.concontrol, &dmc->concontrol);
+
+	/*
+	 * Memor Burst length: 8
+	 * Number of chips: 2
+	 * Memory Bus width: 32 bit
+	 * Memory Type: DDR3
+	 * Additional Latancy for PLL: 1 Cycle
+	 */
+	writel(mem.memcontrol, &dmc->memcontrol);
+
+	writel(mem.memconfig0, &dmc->memconfig0);
+	writel(mem.memconfig1, &dmc->memconfig1);
+
+	/* Config Precharge Policy */
+	writel(mem.prechconfig, &dmc->prechconfig);
+	/*
+	 * TimingAref, TimingRow, TimingData, TimingPower Setting:
+	 * Values as per Memory AC Parameters
+	 */
+	writel(mem.timingref, &dmc->timingref);
+	writel(mem.timingrow, &dmc->timingrow);
+	writel(mem.timingdata, &dmc->timingdata);
+	writel(mem.timingpower, &dmc->timingpower);
+
+	/* Chip0: NOP Command: Assert and Hold CKE to high level */
+	writel(DIRECT_CMD_NOP, &dmc->directcmd);
+	sdelay(0x100000);
+
+	/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+	dmc_config_mrs(dmc, 0);
+	sdelay(0x100000);
+
+	/* Chip0: ZQINIT */
+	writel(DIRECT_CMD_ZQ, &dmc->directcmd);
+	sdelay(0x100000);
+
+	writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
+	sdelay(0x100000);
+
+	/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+	dmc_config_mrs(dmc, 1);
+	sdelay(0x100000);
+
+	/* Chip1: ZQINIT */
+	writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
+	sdelay(0x100000);
+
+	phy_control_reset(1, dmc);
+	sdelay(0x100000);
+
+	/* turn on DREX0, DREX1 */
+	writel((mem.concontrol | AREF_EN), &dmc->concontrol);
+}
+
+void mem_ctrl_init(int reset)
+{
+	struct exynos4_dmc *dmc;
+
+	/*
+	 * Async bridge configuration at CPU_core:
+	 * 1: half_sync
+	 * 0: full_sync
+	 */
+	writel(1, ASYNC_CONFIG);
+#ifdef CONFIG_ORIGEN
+	/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
+	writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
+		APB_SFR_INTERLEAVE_CONF_OFFSET);
+	/* Update MIU Configuration */
+	writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE +
+		APB_SFR_ARBRITATION_CONF_OFFSET);
+#else
+	writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
+		APB_SFR_INTERLEAVE_CONF_OFFSET);
+	writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+		ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET);
+	writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+		ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET);
+	writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE +
+		ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
+#ifdef CONFIG_MIU_LINEAR
+	writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+		ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET);
+	writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+		ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET);
+	writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+		ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET);
+	writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+		ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET);
+	writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE +
+		ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
+#endif
+#endif
+	/* DREX0 */
+	dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl();
+	dmc_init(dmc);
+	dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl()
+					+ DMC_OFFSET);
+	dmc_init(dmc);
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/exynos4_setup.h b/roms/u-boot/arch/arm/mach-exynos/exynos4_setup.h
new file mode 100644
index 000000000..38735f002
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/exynos4_setup.h
@@ -0,0 +1,576 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Machine Specific Values for EXYNOS4012 based board
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ */
+
+#ifndef _ORIGEN_SETUP_H
+#define _ORIGEN_SETUP_H
+
+#include <config.h>
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_CLK_800_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_200_200
+#define DRAM_CLK_200
+#endif
+#ifdef CONFIG_CLK_1000_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_400_200
+#define DRAM_CLK_400
+#endif
+
+/* Bus Configuration Register Address */
+#define ASYNC_CONFIG		0x10010350
+
+/* CLK_SRC_CPU */
+#define MUX_HPM_SEL_MOUTAPLL		0x0
+#define MUX_HPM_SEL_SCLKMPLL		0x1
+#define MUX_CORE_SEL_MOUTAPLL		0x0
+#define MUX_CORE_SEL_SCLKMPLL		0x1
+#define MUX_MPLL_SEL_FILPLL		0x0
+#define MUX_MPLL_SEL_MOUTMPLLFOUT	0x1
+#define MUX_APLL_SEL_FILPLL		0x0
+#define MUX_APLL_SEL_MOUTMPLLFOUT	0x1
+#define CLK_SRC_CPU_VAL			((MUX_HPM_SEL_MOUTAPLL << 20) \
+					| (MUX_CORE_SEL_MOUTAPLL << 16) \
+					| (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
+					| (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
+
+/* CLK_DIV_CPU0 */
+#define APLL_RATIO		0x0
+#define PCLK_DBG_RATIO		0x1
+#define ATB_RATIO		0x3
+#define PERIPH_RATIO		0x3
+#define COREM1_RATIO		0x7
+#define COREM0_RATIO		0x3
+#define CORE_RATIO		0x0
+#define CLK_DIV_CPU0_VAL	((APLL_RATIO << 24) \
+				| (PCLK_DBG_RATIO << 20) \
+				| (ATB_RATIO << 16) \
+				| (PERIPH_RATIO << 12) \
+				| (COREM1_RATIO << 8) \
+				| (COREM0_RATIO << 4) \
+				| (CORE_RATIO << 0))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO		0x0
+#define COPY_RATIO		0x3
+#define CLK_DIV_CPU1_VAL	((HPM_RATIO << 4) | (COPY_RATIO))
+
+/* CLK_SRC_DMC */
+#define MUX_PWI_SEL_XXTI		0x0
+#define MUX_PWI_SEL_XUSBXTI		0x1
+#define MUX_PWI_SEL_SCLK_HDMI24M	0x2
+#define MUX_PWI_SEL_SCLK_USBPHY0	0x3
+#define MUX_PWI_SEL_SCLK_USBPHY1	0x4
+#define MUX_PWI_SEL_SCLK_HDMIPHY	0x5
+#define MUX_PWI_SEL_SCLKMPLL		0x6
+#define MUX_PWI_SEL_SCLKEPLL		0x7
+#define MUX_PWI_SEL_SCLKVPLL		0x8
+#define MUX_DPHY_SEL_SCLKMPLL		0x0
+#define MUX_DPHY_SEL_SCLKAPLL		0x1
+#define MUX_DMC_BUS_SEL_SCLKMPLL	0x0
+#define MUX_DMC_BUS_SEL_SCLKAPLL	0x1
+#define CLK_SRC_DMC_VAL			((MUX_PWI_SEL_XUSBXTI << 16) \
+					| (MUX_DPHY_SEL_SCLKMPLL << 8) \
+					| (MUX_DMC_BUS_SEL_SCLKMPLL << 4))
+
+/* CLK_DIV_DMC0 */
+#define CORE_TIMERS_RATIO	0x1
+#define COPY2_RATIO		0x3
+#define DMCP_RATIO		0x1
+#define DMCD_RATIO		0x1
+#define DMC_RATIO		0x1
+#define DPHY_RATIO		0x1
+#define ACP_PCLK_RATIO		0x1
+#define ACP_RATIO		0x3
+#define CLK_DIV_DMC0_VAL	((CORE_TIMERS_RATIO << 28) \
+				| (COPY2_RATIO << 24) \
+				| (DMCP_RATIO << 20) \
+				| (DMCD_RATIO << 16) \
+				| (DMC_RATIO << 12) \
+				| (DPHY_RATIO << 8) \
+				| (ACP_PCLK_RATIO << 4)	\
+				| (ACP_RATIO << 0))
+
+/* CLK_DIV_DMC1 */
+#define DPM_RATIO		0x1
+#define DVSEM_RATIO		0x1
+#define PWI_RATIO		0x1
+#define CLK_DIV_DMC1_VAL	((DPM_RATIO << 24) \
+				| (DVSEM_RATIO << 16) \
+				| (PWI_RATIO << 8))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ONENAND_SEL_ACLK_133	0x0
+#define MUX_ONENAND_SEL_ACLK_160	0x1
+#define MUX_ACLK_133_SEL_SCLKMPLL	0x0
+#define MUX_ACLK_133_SEL_SCLKAPLL	0x1
+#define MUX_ACLK_160_SEL_SCLKMPLL	0x0
+#define MUX_ACLK_160_SEL_SCLKAPLL	0x1
+#define MUX_ACLK_100_SEL_SCLKMPLL	0x0
+#define MUX_ACLK_100_SEL_SCLKAPLL	0x1
+#define MUX_ACLK_200_SEL_SCLKMPLL	0x0
+#define MUX_ACLK_200_SEL_SCLKAPLL	0x1
+#define MUX_VPLL_SEL_FINPLL		0x0
+#define MUX_VPLL_SEL_FOUTVPLL		0x1
+#define MUX_EPLL_SEL_FINPLL		0x0
+#define MUX_EPLL_SEL_FOUTEPLL		0x1
+#define MUX_ONENAND_1_SEL_MOUTONENAND	0x0
+#define MUX_ONENAND_1_SEL_SCLKVPLL	0x1
+#define CLK_SRC_TOP0_VAL		((MUX_ONENAND_SEL_ACLK_133 << 28) \
+					| (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
+					| (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
+					| (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
+					| (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
+					| (MUX_VPLL_SEL_FINPLL << 8) \
+					| (MUX_EPLL_SEL_FINPLL << 4)\
+					| (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
+
+/* CLK_SRC_TOP1 */
+#define VPLLSRC_SEL_FINPLL	0x0
+#define VPLLSRC_SEL_SCLKHDMI24M	0x1
+#define CLK_SRC_TOP1_VAL	(VPLLSRC_SEL_FINPLL)
+
+/* CLK_DIV_TOP */
+#define ONENAND_RATIO		0x0
+#define ACLK_133_RATIO		0x5
+#define ACLK_160_RATIO		0x4
+#define ACLK_100_RATIO		0x7
+#define ACLK_200_RATIO		0x3
+#define CLK_DIV_TOP_VAL		((ONENAND_RATIO << 16)	\
+				| (ACLK_133_RATIO << 12)\
+				| (ACLK_160_RATIO << 8)	\
+				| (ACLK_100_RATIO << 4)	\
+				| (ACLK_200_RATIO << 0))
+
+/* CLK_SRC_LEFTBUS */
+#define MUX_GDL_SEL_SCLKMPLL	0x0
+#define MUX_GDL_SEL_SCLKAPLL	0x1
+#define CLK_SRC_LEFTBUS_VAL	(MUX_GDL_SEL_SCLKMPLL)
+
+/* CLK_DIV_LEFTBUS */
+#define GPL_RATIO		0x1
+#define GDL_RATIO		0x3
+#define CLK_DIV_LEFTBUS_VAL	((GPL_RATIO << 4) | (GDL_RATIO))
+
+/* CLK_SRC_RIGHTBUS */
+#define MUX_GDR_SEL_SCLKMPLL	0x0
+#define MUX_GDR_SEL_SCLKAPLL	0x1
+#define CLK_SRC_RIGHTBUS_VAL	(MUX_GDR_SEL_SCLKMPLL)
+
+/* CLK_DIV_RIGHTBUS */
+#define GPR_RATIO		0x1
+#define GDR_RATIO		0x3
+#define CLK_DIV_RIGHTBUS_VAL	((GPR_RATIO << 4) | (GDR_RATIO))
+
+/* CLK_SRS_FSYS: 6 = SCLKMPLL */
+#define SATA_SEL_SCLKMPLL	0
+#define SATA_SEL_SCLKAPLL	1
+
+#define MMC_SEL_XXTI		0
+#define MMC_SEL_XUSBXTI		1
+#define MMC_SEL_SCLK_HDMI24M	2
+#define MMC_SEL_SCLK_USBPHY0	3
+#define MMC_SEL_SCLK_USBPHY1	4
+#define MMC_SEL_SCLK_HDMIPHY	5
+#define MMC_SEL_SCLKMPLL	6
+#define MMC_SEL_SCLKEPLL	7
+#define MMC_SEL_SCLKVPLL	8
+
+#define MMCC0_SEL		MMC_SEL_SCLKMPLL
+#define MMCC1_SEL		MMC_SEL_SCLKMPLL
+#define MMCC2_SEL		MMC_SEL_SCLKMPLL
+#define MMCC3_SEL		MMC_SEL_SCLKMPLL
+#define MMCC4_SEL		MMC_SEL_SCLKMPLL
+#define CLK_SRC_FSYS_VAL	((SATA_SEL_SCLKMPLL << 24) \
+				| (MMCC4_SEL << 16) \
+				| (MMCC3_SEL << 12) \
+				| (MMCC2_SEL << 8) \
+				| (MMCC1_SEL << 4) \
+				| (MMCC0_SEL << 0))
+
+/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
+/* CLK_DIV_FSYS1 */
+#define MMC0_RATIO		0xF
+#define MMC0_PRE_RATIO		0x0
+#define MMC1_RATIO		0xF
+#define MMC1_PRE_RATIO		0x0
+#define CLK_DIV_FSYS1_VAL	((MMC1_PRE_RATIO << 24) \
+				| (MMC1_RATIO << 16) \
+				| (MMC0_PRE_RATIO << 8) \
+				| (MMC0_RATIO << 0))
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO		0xF
+#define MMC2_PRE_RATIO		0x0
+#define MMC3_RATIO		0xF
+#define MMC3_PRE_RATIO		0x0
+#define CLK_DIV_FSYS2_VAL	((MMC3_PRE_RATIO << 24) \
+				| (MMC3_RATIO << 16) \
+				| (MMC2_PRE_RATIO << 8) \
+				| (MMC2_RATIO << 0))
+
+/* CLK_DIV_FSYS3 */
+#define MMC4_RATIO		0xF
+#define MMC4_PRE_RATIO		0x0
+#define CLK_DIV_FSYS3_VAL	((MMC4_PRE_RATIO << 8) \
+				| (MMC4_RATIO << 0))
+
+/* CLK_SRC_PERIL0 */
+#define UART_SEL_XXTI		0
+#define UART_SEL_XUSBXTI	1
+#define UART_SEL_SCLK_HDMI24M	2
+#define UART_SEL_SCLK_USBPHY0	3
+#define UART_SEL_SCLK_USBPHY1	4
+#define UART_SEL_SCLK_HDMIPHY	5
+#define UART_SEL_SCLKMPLL	6
+#define UART_SEL_SCLKEPLL	7
+#define UART_SEL_SCLKVPLL	8
+
+#define UART0_SEL		UART_SEL_SCLKMPLL
+#define UART1_SEL		UART_SEL_SCLKMPLL
+#define UART2_SEL		UART_SEL_SCLKMPLL
+#define UART3_SEL		UART_SEL_SCLKMPLL
+#define UART4_SEL		UART_SEL_SCLKMPLL
+#define CLK_SRC_PERIL0_VAL	((UART4_SEL << 16) \
+				| (UART3_SEL << 12) \
+				| (UART2_SEL << 8) \
+				| (UART1_SEL << 4) \
+				| (UART0_SEL << 0))
+
+/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */
+/* CLK_DIV_PERIL0 */
+#define UART0_RATIO		7
+#define UART1_RATIO		7
+#define UART2_RATIO		7
+#define UART3_RATIO		7
+#define UART4_RATIO		7
+#define CLK_DIV_PERIL0_VAL	((UART4_RATIO << 16) \
+				| (UART3_RATIO << 12) \
+				| (UART2_RATIO << 8) \
+				| (UART1_RATIO << 4) \
+				| (UART0_RATIO << 0))
+
+/* Clock Source CAM/FIMC */
+/* CLK_SRC_CAM */
+#define CAM0_SEL_XUSBXTI	1
+#define CAM1_SEL_XUSBXTI	1
+#define CSIS0_SEL_XUSBXTI	1
+#define CSIS1_SEL_XUSBXTI	1
+
+#define FIMC_SEL_SCLKMPLL	6
+#define FIMC0_LCLK_SEL		FIMC_SEL_SCLKMPLL
+#define FIMC1_LCLK_SEL		FIMC_SEL_SCLKMPLL
+#define FIMC2_LCLK_SEL		FIMC_SEL_SCLKMPLL
+#define FIMC3_LCLK_SEL		FIMC_SEL_SCLKMPLL
+
+#define CLK_SRC_CAM_VAL		((CSIS1_SEL_XUSBXTI << 28) \
+				| (CSIS0_SEL_XUSBXTI << 24) \
+				| (CAM1_SEL_XUSBXTI << 20) \
+				| (CAM0_SEL_XUSBXTI << 16) \
+				| (FIMC3_LCLK_SEL << 12) \
+				| (FIMC2_LCLK_SEL << 8) \
+				| (FIMC1_LCLK_SEL << 4) \
+				| (FIMC0_LCLK_SEL << 0))
+
+/* SCLK CAM */
+/* CLK_DIV_CAM */
+#define FIMC0_LCLK_RATIO	4
+#define FIMC1_LCLK_RATIO	4
+#define FIMC2_LCLK_RATIO	4
+#define FIMC3_LCLK_RATIO	4
+#define CLK_DIV_CAM_VAL		((FIMC3_LCLK_RATIO << 12) \
+				| (FIMC2_LCLK_RATIO << 8) \
+				| (FIMC1_LCLK_RATIO << 4) \
+				| (FIMC0_LCLK_RATIO << 0))
+
+/* SCLK MFC */
+/* CLK_SRC_MFC */
+#define MFC_SEL_MPLL		0
+#define MOUTMFC_0		0
+#define MFC_SEL			MOUTMFC_0
+#define MFC_0_SEL		MFC_SEL_MPLL
+#define CLK_SRC_MFC_VAL		((MFC_SEL << 8) | (MFC_0_SEL))
+
+
+/* CLK_DIV_MFC */
+#define MFC_RATIO		3
+#define CLK_DIV_MFC_VAL		(MFC_RATIO)
+
+/* SCLK G3D */
+/* CLK_SRC_G3D */
+#define G3D_SEL_MPLL		0
+#define MOUTG3D_0		0
+#define G3D_SEL			MOUTG3D_0
+#define G3D_0_SEL		G3D_SEL_MPLL
+#define CLK_SRC_G3D_VAL		((G3D_SEL << 8) | (G3D_0_SEL))
+
+/* CLK_DIV_G3D */
+#define G3D_RATIO		1
+#define CLK_DIV_G3D_VAL		(G3D_RATIO)
+
+/* SCLK LCD0 */
+/* CLK_SRC_LCD0 */
+#define FIMD_SEL_SCLKMPLL	6
+#define MDNIE0_SEL_XUSBXTI	1
+#define MDNIE_PWM0_SEL_XUSBXTI	1
+#define MIPI0_SEL_XUSBXTI	1
+#define CLK_SRC_LCD0_VAL	((MIPI0_SEL_XUSBXTI << 12) \
+				| (MDNIE_PWM0_SEL_XUSBXTI << 8) \
+				| (MDNIE0_SEL_XUSBXTI << 4) \
+				| (FIMD_SEL_SCLKMPLL << 0))
+
+/* CLK_DIV_LCD0 */
+#define FIMD0_RATIO		4
+#define CLK_DIV_LCD0_VAL	(FIMD0_RATIO)
+
+/* Required period to generate a stable clock output */
+/* PLL_LOCK_TIME */
+#define PLL_LOCKTIME		0x1C20
+
+/* PLL Values */
+#define DISABLE			0
+#define ENABLE			1
+#define SET_PLL(mdiv, pdiv, sdiv)	((ENABLE << 31)\
+					| (mdiv << 16) \
+					| (pdiv << 8) \
+					| (sdiv << 0))
+
+/* APLL_CON0 */
+#define APLL_MDIV		0xFA
+#define APLL_PDIV		0x6
+#define APLL_SDIV		0x1
+#define APLL_CON0_VAL		SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+
+/* APLL_CON1 */
+#define APLL_AFC_ENB		0x1
+#define APLL_AFC		0xC
+#define APLL_CON1_VAL		((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
+
+/* MPLL_CON0 */
+#define MPLL_MDIV		0xC8
+#define MPLL_PDIV		0x6
+#define MPLL_SDIV		0x1
+#define MPLL_CON0_VAL		SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+
+/* MPLL_CON1 */
+#define MPLL_AFC_ENB		0x0
+#define MPLL_AFC		0x1C
+#define MPLL_CON1_VAL		((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
+
+/* EPLL_CON0 */
+#define EPLL_MDIV		0x30
+#define EPLL_PDIV		0x3
+#define EPLL_SDIV		0x2
+#define EPLL_CON0_VAL		SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+
+/* EPLL_CON1 */
+#define EPLL_K			0x0
+#define EPLL_CON1_VAL		(EPLL_K >> 0)
+
+/* VPLL_CON0 */
+#define VPLL_MDIV		0x35
+#define VPLL_PDIV		0x3
+#define VPLL_SDIV		0x2
+#define VPLL_CON0_VAL		SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+
+/* VPLL_CON1 */
+#define VPLL_SSCG_EN		DISABLE
+#define VPLL_SEL_PF_DN_SPREAD	0x0
+#define VPLL_MRR		0x11
+#define VPLL_MFR		0x0
+#define VPLL_K			0x400
+#define VPLL_CON1_VAL		((VPLL_SSCG_EN << 31)\
+				| (VPLL_SEL_PF_DN_SPREAD << 29) \
+				| (VPLL_MRR << 24) \
+				| (VPLL_MFR << 16) \
+				| (VPLL_K << 0))
+
+/* DMC */
+#define DIRECT_CMD_NOP	0x07000000
+#define DIRECT_CMD_ZQ	0x0a000000
+#define DIRECT_CMD_CHIP1_SHIFT	(1 << 20)
+#define MEM_TIMINGS_MSR_COUNT	4
+#define CTRL_START	(1 << 0)
+#define CTRL_DLL_ON	(1 << 1)
+#define AREF_EN		(1 << 5)
+#define DRV_TYPE	(1 << 6)
+
+struct mem_timings {
+	unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
+	unsigned timingref;
+	unsigned timingrow;
+	unsigned timingdata;
+	unsigned timingpower;
+	unsigned zqcontrol;
+	unsigned control0;
+	unsigned control1;
+	unsigned control2;
+	unsigned concontrol;
+	unsigned prechconfig;
+	unsigned memcontrol;
+	unsigned memconfig0;
+	unsigned memconfig1;
+	unsigned dll_resync;
+	unsigned dll_on;
+};
+
+/* MIU */
+/* MIU Config Register Offsets*/
+#define APB_SFR_INTERLEAVE_CONF_OFFSET	0x400
+#define APB_SFR_ARBRITATION_CONF_OFFSET	0xC00
+#define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET	0x800
+#define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET	0x808
+#define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET	0x810
+#define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET	0x818
+#define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET	0x820
+#define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET	0x828
+#define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET	0x830
+
+#ifdef CONFIG_ORIGEN
+/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
+#define APB_SFR_INTERLEAVE_CONF_VAL	0x20001507
+#define APB_SFR_ARBRITATION_CONF_VAL	0x00000001
+#endif
+
+#define INTERLEAVE_ADDR_MAP_START_ADDR	0x40000000
+#define INTERLEAVE_ADDR_MAP_END_ADDR	0xbfffffff
+#define INTERLEAVE_ADDR_MAP_EN		0x00000001
+
+#ifdef CONFIG_MIU_1BIT_INTERLEAVED
+/* Interleave_bit0: 0xC*/
+#define APB_SFR_INTERLEAVE_CONF_VAL	0x0000000c
+#endif
+#ifdef CONFIG_MIU_2BIT_INTERLEAVED
+/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */
+#define APB_SFR_INTERLEAVE_CONF_VAL	0x2000150c
+#endif
+#define SLAVE0_SINGLE_ADDR_MAP_START_ADDR	0x40000000
+#define SLAVE0_SINGLE_ADDR_MAP_END_ADDR		0x7fffffff
+#define SLAVE1_SINGLE_ADDR_MAP_START_ADDR	0x80000000
+#define SLAVE1_SINGLE_ADDR_MAP_END_ADDR		0xbfffffff
+/* Enable SME0 and SME1*/
+#define APB_SFR_SLV_ADDR_MAP_CONF_VAL		0x00000006
+
+#define FORCE_DLL_RESYNC	3
+#define DLL_CONTROL_ON		1
+
+#define DIRECT_CMD1	0x00020000
+#define DIRECT_CMD2	0x00030000
+#define DIRECT_CMD3	0x00010002
+#define DIRECT_CMD4	0x00000328
+
+#define CTRL_ZQ_MODE_NOTERM	(0x1 << 0)
+#define CTRL_ZQ_START		(0x1 << 1)
+#define CTRL_ZQ_DIV		(0 << 4)
+#define CTRL_ZQ_MODE_DDS	(0x7 << 8)
+#define CTRL_ZQ_MODE_TERM	(0x2 << 11)
+#define CTRL_ZQ_FORCE_IMPN	(0x5 << 14)
+#define CTRL_ZQ_FORCE_IMPP	(0x6 << 17)
+#define CTRL_DCC		(0xE38 << 20)
+#define ZQ_CONTROL_VAL		(CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\
+				| CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\
+				| CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\
+				| CTRL_ZQ_FORCE_IMPP | CTRL_DCC)
+
+#define ASYNC			(0 << 0)
+#define CLK_RATIO		(1 << 1)
+#define DIV_PIPE		(1 << 3)
+#define AWR_ON			(1 << 4)
+#define AREF_DISABLE		(0 << 5)
+#define DRV_TYPE_DISABLE	(0 << 6)
+#define CHIP0_NOT_EMPTY		(0 << 8)
+#define CHIP1_NOT_EMPTY		(0 << 9)
+#define DQ_SWAP_DISABLE		(0 << 10)
+#define QOS_FAST_DISABLE	(0 << 11)
+#define RD_FETCH		(0x3 << 12)
+#define TIMEOUT_LEVEL0		(0xFFF << 16)
+#define CONCONTROL_VAL		(ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\
+				| AREF_DISABLE | DRV_TYPE_DISABLE\
+				| CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\
+				| DQ_SWAP_DISABLE | QOS_FAST_DISABLE\
+				| RD_FETCH | TIMEOUT_LEVEL0)
+
+#define CLK_STOP_DISABLE	(0 << 1)
+#define DPWRDN_DISABLE		(0 << 2)
+#define DPWRDN_TYPE		(0 << 3)
+#define TP_DISABLE		(0 << 4)
+#define DSREF_DIABLE		(0 << 5)
+#define ADD_LAT_PALL		(1 << 6)
+#define MEM_TYPE_DDR3		(0x6 << 8)
+#define MEM_WIDTH_32		(0x2 << 12)
+#define NUM_CHIP_2		(1 << 16)
+#define BL_8			(0x3 << 20)
+#define MEMCONTROL_VAL		(CLK_STOP_DISABLE | DPWRDN_DISABLE\
+				| DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\
+				| ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\
+				| NUM_CHIP_2 | BL_8)
+
+
+#define CHIP_BANK_8		(0x3 << 0)
+#define CHIP_ROW_14		(0x2 << 4)
+#define CHIP_COL_10		(0x3 << 8)
+#define CHIP_MAP_INTERLEAVED	(1 << 12)
+#define CHIP_MASK		(0xe0 << 16)
+#ifdef CONFIG_MIU_LINEAR
+#define CHIP0_BASE		(0x40 << 24)
+#define CHIP1_BASE		(0x60 << 24)
+#else
+#define CHIP0_BASE		(0x20 << 24)
+#define CHIP1_BASE		(0x40 << 24)
+#endif
+#define MEMCONFIG0_VAL		(CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
+				| CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE)
+#define MEMCONFIG1_VAL		(CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
+				| CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE)
+
+#define TP_CNT			(0xff << 24)
+#define PRECHCONFIG		TP_CNT
+
+#define CTRL_OFF		(0 << 0)
+#define CTRL_DLL_OFF		(0 << 1)
+#define CTRL_HALF		(0 << 2)
+#define CTRL_DFDQS		(1 << 3)
+#define DQS_DELAY		(0 << 4)
+#define CTRL_START_POINT	(0x10 << 8)
+#define CTRL_INC		(0x10 << 16)
+#define CTRL_FORCE		(0x71 << 24)
+#define CONTROL0_VAL		(CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\
+				| CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\
+				| CTRL_INC | CTRL_FORCE)
+
+#define CTRL_SHIFTC		(0x6 << 0)
+#define CTRL_REF		(8 << 4)
+#define CTRL_SHGATE		(1 << 29)
+#define TERM_READ_EN		(1 << 30)
+#define TERM_WRITE_EN		(1 << 31)
+#define CONTROL1_VAL		(CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\
+				| TERM_READ_EN | TERM_WRITE_EN)
+
+#define CONTROL2_VAL		0x00000000
+
+#ifdef CONFIG_ORIGEN
+#define TIMINGREF_VAL		0x000000BB
+#define TIMINGROW_VAL		0x4046654f
+#define	TIMINGDATA_VAL		0x46400506
+#define	TIMINGPOWER_VAL		0x52000A3C
+#else
+#define TIMINGREF_VAL		0x000000BC
+#ifdef DRAM_CLK_330
+#define TIMINGROW_VAL		0x3545548d
+#define	TIMINGDATA_VAL		0x45430506
+#define	TIMINGPOWER_VAL		0x4439033c
+#endif
+#ifdef DRAM_CLK_400
+#define TIMINGROW_VAL		0x45430506
+#define	TIMINGDATA_VAL		0x56500506
+#define	TIMINGPOWER_VAL		0x5444033d
+#endif
+#endif
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/exynos5_setup.h b/roms/u-boot/arch/arm/mach-exynos/exynos5_setup.h
new file mode 100644
index 000000000..bf4cca9e1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/exynos5_setup.h
@@ -0,0 +1,946 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Machine Specific Values for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ */
+
+#ifndef _SMDK5250_SETUP_H
+#define _SMDK5250_SETUP_H
+
+#include <config.h>
+#include <asm/arch/dmc.h>
+
+#define NOT_AVAILABLE		0
+#define DATA_MASK		0xFFFFF
+
+#define ENABLE_BIT		0x1
+#define DISABLE_BIT		0x0
+#define CA_SWAP_EN		(1 << 0)
+
+/* Set PLL */
+#define set_pll(mdiv, pdiv, sdiv)	(1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
+
+/* MEMCONTROL register bit fields */
+#define DMC_MEMCONTROL_CLK_STOP_DISABLE	(0 << 0)
+#define DMC_MEMCONTROL_DPWRDN_DISABLE	(0 << 1)
+#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE	(0 << 2)
+#define DMC_MEMCONTROL_TP_DISABLE	(0 << 4)
+#define DMC_MEMCONTROL_DSREF_DISABLE	(0 << 5)
+#define DMC_MEMCONTROL_DSREF_ENABLE	(1 << 5)
+#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x)    (x << 6)
+
+#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3  (7 << 8)
+#define DMC_MEMCONTROL_MEM_TYPE_DDR3    (6 << 8)
+#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2  (5 << 8)
+
+#define DMC_MEMCONTROL_MEM_WIDTH_32BIT  (2 << 12)
+
+#define DMC_MEMCONTROL_NUM_CHIP_1       (0 << 16)
+#define DMC_MEMCONTROL_NUM_CHIP_2       (1 << 16)
+
+#define DMC_MEMCONTROL_BL_8             (3 << 20)
+#define DMC_MEMCONTROL_BL_4             (2 << 20)
+
+#define DMC_MEMCONTROL_PZQ_DISABLE      (0 << 24)
+
+#define DMC_MEMCONTROL_MRR_BYTE_7_0     (0 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_15_8    (1 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_23_16   (2 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_31_24   (3 << 25)
+
+/* MEMCONFIG0 register bit fields */
+#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED     (1 << 12)
+#define DMC_MEMCONFIG_CHIP_MAP_SPLIT		(2 << 12)
+#define DMC_MEMCONFIGX_CHIP_COL_10              (3 << 8)
+#define DMC_MEMCONFIGX_CHIP_ROW_14              (2 << 4)
+#define DMC_MEMCONFIGX_CHIP_ROW_15              (3 << 4)
+#define DMC_MEMCONFIGX_CHIP_BANK_8              (3 << 0)
+
+#define DMC_MEMBASECONFIGX_CHIP_BASE(x)         (x << 16)
+#define DMC_MEMBASECONFIGX_CHIP_MASK(x)         (x << 0)
+#define DMC_MEMBASECONFIG_VAL(x)        (       \
+	DMC_MEMBASECONFIGX_CHIP_BASE(x) |       \
+	DMC_MEMBASECONFIGX_CHIP_MASK(0x780)     \
+)
+
+/*
+ * As we use channel interleaving, therefore value of the base address
+ * register must be set as half of the bus base address
+ * RAM start addess is 0x2000_0000 which means chip_base is 0x20, so
+ * we need to set half 0x10 to the membaseconfigx registers
+ * see exynos5420 UM section 17.17.3.21 for more.
+ */
+#define DMC_CHIP_BASE_0 0x10
+#define DMC_CHIP_BASE_1 0x50
+#define DMC_CHIP_MASK	0x7C0
+
+#define DMC_MEMBASECONFIG0_VAL  DMC_MEMBASECONFIG_VAL(0x40)
+#define DMC_MEMBASECONFIG1_VAL  DMC_MEMBASECONFIG_VAL(0x80)
+
+#define DMC_PRECHCONFIG_VAL             0xFF000000
+#define DMC_PWRDNCONFIG_VAL             0xFFFF00FF
+
+#define DMC_CONCONTROL_RESET_VAL	0x0FFF0000
+#define DFI_INIT_START		(1 << 28)
+#define EMPTY			(1 << 8)
+#define AREF_EN			(1 << 5)
+
+#define DFI_INIT_COMPLETE_CHO	(1 << 2)
+#define DFI_INIT_COMPLETE_CH1	(1 << 3)
+
+#define RDLVL_COMPLETE_CHO	(1 << 14)
+#define RDLVL_COMPLETE_CH1	(1 << 15)
+
+#define CLK_STOP_EN	(1 << 0)
+#define DPWRDN_EN	(1 << 1)
+#define DSREF_EN	(1 << 5)
+
+/* COJCONTROL register bit fields */
+#define DMC_CONCONTROL_IO_PD_CON_DISABLE	(0 << 3)
+#define DMC_CONCONTROL_IO_PD_CON_ENABLE		(1 << 3)
+#define DMC_CONCONTROL_AREF_EN_DISABLE		(0 << 5)
+#define DMC_CONCONTROL_AREF_EN_ENABLE		(1 << 5)
+#define DMC_CONCONTROL_EMPTY_DISABLE		(0 << 8)
+#define DMC_CONCONTROL_EMPTY_ENABLE		(1 << 8)
+#define DMC_CONCONTROL_RD_FETCH_DISABLE		(0x0 << 12)
+#define DMC_CONCONTROL_TIMEOUT_LEVEL0		(0xFFF << 16)
+#define DMC_CONCONTROL_DFI_INIT_START_DISABLE	(0 << 28)
+
+#define DMC_CONCONTROL_VAL	0x1FFF2101
+
+#define DREX_CONCONTROL_VAL	DMC_CONCONTROL_VAL			\
+				| DMC_CONCONTROL_AREF_EN_ENABLE		\
+				| DMC_CONCONTROL_IO_PD_CON_ENABLE
+
+#define DMC_CONCONTROL_IO_PD_CON(x)		(x << 6)
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO               0x2
+#define COPY_RATIO              0x0
+
+/* CLK_DIV_CPU1 = 0x00000003 */
+#define CLK_DIV_CPU1_VAL        ((HPM_RATIO << 4)		\
+				| (COPY_RATIO))
+
+/* CLK_SRC_CORE0 */
+#define CLK_SRC_CORE0_VAL       0x00000000
+
+/* CLK_SRC_CORE1 */
+#define CLK_SRC_CORE1_VAL       0x100
+
+/* CLK_DIV_CORE0 */
+#define CLK_DIV_CORE0_VAL       0x00120000
+
+/* CLK_DIV_CORE1 */
+#define CLK_DIV_CORE1_VAL       0x07070700
+
+/* CLK_DIV_SYSRGT */
+#define CLK_DIV_SYSRGT_VAL      0x00000111
+
+/* CLK_DIV_ACP */
+#define CLK_DIV_ACP_VAL         0x12
+
+/* CLK_DIV_SYSLFT */
+#define CLK_DIV_SYSLFT_VAL      0x00000311
+
+#define MUX_APLL_SEL_MASK	(1 << 0)
+#define MUX_MPLL_SEL_MASK	(1 << 8)
+#define MPLL_SEL_MOUT_MPLLFOUT	(2 << 8)
+#define MUX_CPLL_SEL_MASK	(1 << 8)
+#define MUX_EPLL_SEL_MASK	(1 << 12)
+#define MUX_VPLL_SEL_MASK	(1 << 16)
+#define MUX_GPLL_SEL_MASK	(1 << 28)
+#define MUX_BPLL_SEL_MASK	(1 << 0)
+#define MUX_HPM_SEL_MASK	(1 << 20)
+#define HPM_SEL_SCLK_MPLL	(1 << 21)
+#define PLL_LOCKED		(1 << 29)
+#define APLL_CON0_LOCKED	(1 << 29)
+#define MPLL_CON0_LOCKED	(1 << 29)
+#define BPLL_CON0_LOCKED	(1 << 29)
+#define CPLL_CON0_LOCKED	(1 << 29)
+#define EPLL_CON0_LOCKED	(1 << 29)
+#define GPLL_CON0_LOCKED	(1 << 29)
+#define VPLL_CON0_LOCKED	(1 << 29)
+#define CLK_REG_DISABLE		0x0
+#define TOP2_VAL		0x0110000
+
+/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
+#define SPI0_ISP_SEL		6
+#define SPI1_ISP_SEL		6
+#define SCLK_SRC_ISP_VAL	(SPI1_ISP_SEL << 4) \
+				| (SPI0_ISP_SEL << 0)
+
+/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
+#define SPI0_ISP_RATIO		0xf
+#define SPI1_ISP_RATIO		0xf
+#define SCLK_DIV_ISP_VAL	(SPI1_ISP_RATIO << 12) \
+				| (SPI0_ISP_RATIO << 0)
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO_MASK		0xf
+#define MMC2_RATIO_VAL		0x3
+#define MMC2_RATIO_OFFSET	0
+
+#define MMC2_PRE_RATIO_MASK	0xff
+#define MMC2_PRE_RATIO_VAL	0x9
+#define MMC2_PRE_RATIO_OFFSET	8
+
+#define MMC3_RATIO_MASK		0xf
+#define MMC3_RATIO_VAL		0x1
+#define MMC3_RATIO_OFFSET	16
+
+#define MMC3_PRE_RATIO_MASK	0xff
+#define MMC3_PRE_RATIO_VAL	0x0
+#define MMC3_PRE_RATIO_OFFSET	24
+
+/* CLK_SRC_LEX */
+#define CLK_SRC_LEX_VAL         0x0
+
+/* CLK_DIV_LEX */
+#define CLK_DIV_LEX_VAL         0x10
+
+/* CLK_DIV_R0X */
+#define CLK_DIV_R0X_VAL         0x10
+
+/* CLK_DIV_L0X */
+#define CLK_DIV_R1X_VAL         0x10
+
+/* CLK_DIV_ISP2 */
+#define CLK_DIV_ISP2_VAL        0x1
+
+/* CLK_SRC_KFC */
+#define SRC_KFC_HPM_SEL		(1 << 15)
+
+/* CLK_SRC_KFC */
+#define CLK_SRC_KFC_VAL		0x00008001
+
+/* CLK_DIV_KFC */
+#define CLK_DIV_KFC_VAL		0x03300110
+
+/* CLK_DIV2_RATIO */
+#define CLK_DIV2_RATIO		0x10111150
+
+/* CLK_DIV4_RATIO */
+#define CLK_DIV4_RATIO		0x00000003
+
+/* CLK_DIV_G2D */
+#define CLK_DIV_G2D		0x00000010
+
+/*
+ * DIV_DISP1_0
+ * For DP, divisor should be 2
+ */
+#define CLK_DIV_DISP1_0_FIMD1	(2 << 0)
+
+/* CLK_GATE_IP_DISP1 */
+#define CLK_GATE_DP1_ALLOW	(1 << 4)
+
+/* AUDIO CLK SEL */
+#define AUDIO0_SEL_EPLL		(0x6 << 28)
+#define AUDIO0_RATIO		0x5
+#define PCM0_RATIO		0x3
+#define DIV_MAU_VAL		(PCM0_RATIO << 24 | AUDIO0_RATIO << 20)
+
+/* CLK_SRC_CDREX */
+#define MUX_MCLK_CDR_MSPLL	(1 << 4)
+#define MUX_BPLL_SEL_FOUTBPLL   (1 << 0)
+#define BPLL_SEL_MASK   0x7
+#define FOUTBPLL        2
+
+#define DDR3PHY_CTRL_PHY_RESET	(1 << 0)
+#define DDR3PHY_CTRL_PHY_RESET_OFF	(0 << 0)
+
+#define PHY_CON0_RESET_VAL	0x17020a40
+#define P0_CMD_EN		(1 << 14)
+#define BYTE_RDLVL_EN		(1 << 13)
+#define CTRL_SHGATE		(1 << 8)
+
+#define PHY_CON1_RESET_VAL	0x09210100
+#define RDLVL_PASS_ADJ_VAL	0x6
+#define RDLVL_PASS_ADJ_OFFSET	16
+#define CTRL_GATEDURADJ_MASK	(0xf << 20)
+#define READ_LEVELLING_DDR3	0x0100
+
+#define PHY_CON2_RESET_VAL	0x00010004
+#define INIT_DESKEW_EN		(1 << 6)
+#define DLL_DESKEW_EN		(1 << 12)
+#define RDLVL_GATE_EN		(1 << 24)
+#define RDLVL_EN		(1 << 25)
+#define RDLVL_INCR_ADJ		(0x1 << 16)
+
+/* DREX_PAUSE */
+#define DREX_PAUSE_EN	(1 << 0)
+
+#define BYPASS_EN	(1 << 22)
+
+/* MEMMORY VAL */
+#define PHY_CON0_VAL	0x17021A00
+
+#define PHY_CON12_RESET_VAL	0x10100070
+#define PHY_CON12_VAL		0x10107F50
+#define CTRL_START		(1 << 6)
+#define CTRL_DLL_ON		(1 << 5)
+#define CTRL_LOCK_COARSE_OFFSET	10
+#define CTRL_LOCK_COARSE_MASK	(0x7F << CTRL_LOCK_COARSE_OFFSET)
+#define CTRL_LOCK_COARSE(x)	(((x) & CTRL_LOCK_COARSE_MASK) >> \
+				 CTRL_LOCK_COARSE_OFFSET)
+#define CTRL_FORCE_MASK		(0x7F << 8)
+#define CTRL_FINE_LOCKED	0x7
+
+#define CTRL_OFFSETD_RESET_VAL	0x8
+#define CTRL_OFFSETD_VAL	0x7F
+
+#define CTRL_OFFSETR0		0x7F
+#define CTRL_OFFSETR1		0x7F
+#define CTRL_OFFSETR2		0x7F
+#define CTRL_OFFSETR3		0x7F
+#define PHY_CON4_VAL	(CTRL_OFFSETR0 << 0 | \
+				CTRL_OFFSETR1 << 8 | \
+				CTRL_OFFSETR2 << 16 | \
+				CTRL_OFFSETR3 << 24)
+#define PHY_CON4_RESET_VAL	0x08080808
+
+#define CTRL_OFFSETW0		0x7F
+#define CTRL_OFFSETW1		0x7F
+#define CTRL_OFFSETW2		0x7F
+#define CTRL_OFFSETW3		0x7F
+#define PHY_CON6_VAL	(CTRL_OFFSETW0 << 0 | \
+				CTRL_OFFSETW1 << 8 | \
+				CTRL_OFFSETW2 << 16 | \
+				CTRL_OFFSETW3 << 24)
+#define PHY_CON6_RESET_VAL	0x08080808
+
+#define PHY_CON14_RESET_VAL	0x001F0000
+#define CTRL_PULLD_DQS		0xF
+#define CTRL_PULLD_DQS_OFFSET	0
+
+/* ZQ Configurations */
+#define PHY_CON16_RESET_VAL	0x08000304
+
+#define ZQ_CLK_EN		(1 << 27)
+#define ZQ_CLK_DIV_EN		(1 << 18)
+#define ZQ_MANUAL_STR		(1 << 1)
+#define ZQ_DONE			(1 << 0)
+#define ZQ_MODE_DDS_OFFSET	24
+
+#define CTRL_RDLVL_GATE_ENABLE	1
+#define CTRL_RDLVL_GATE_DISABLE	0
+#define CTRL_RDLVL_DATA_ENABLE	2
+
+/* Direct Command */
+#define DIRECT_CMD_NOP			0x07000000
+#define DIRECT_CMD_PALL			0x01000000
+#define DIRECT_CMD_ZQINIT		0x0a000000
+#define DIRECT_CMD_CHANNEL_SHIFT	28
+#define DIRECT_CMD_CHIP_SHIFT		20
+#define DIRECT_CMD_BANK_SHIFT		16
+#define DIRECT_CMD_REFA		(5 << 24)
+#define DIRECT_CMD_MRS1		0x71C00
+#define DIRECT_CMD_MRS2		0x10BFC
+#define DIRECT_CMD_MRS3		0x0050C
+#define DIRECT_CMD_MRS4		0x00868
+#define DIRECT_CMD_MRS5		0x00C04
+
+/* Drive Strength */
+#define IMPEDANCE_48_OHM	4
+#define IMPEDANCE_40_OHM	5
+#define IMPEDANCE_34_OHM	6
+#define IMPEDANCE_30_OHM	7
+#define PHY_CON39_VAL_48_OHM	0x09240924
+#define PHY_CON39_VAL_40_OHM	0x0B6D0B6D
+#define PHY_CON39_VAL_34_OHM	0x0DB60DB6
+#define PHY_CON39_VAL_30_OHM	0x0FFF0FFF
+
+#define CTRL_BSTLEN_OFFSET	8
+#define CTRL_RDLAT_OFFSET	0
+
+#define CMD_DEFAULT_LPDDR3	0xF
+#define CMD_DEFUALT_OFFSET	0
+#define T_WRDATA_EN		0x7
+#define T_WRDATA_EN_DDR3	0x8
+#define T_WRDATA_EN_OFFSET	16
+#define T_WRDATA_EN_MASK	0x1f
+
+#define PHY_CON31_VAL	0x0C183060
+#define PHY_CON32_VAL	0x60C18306
+#define PHY_CON33_VAL	0x00000030
+
+#define PHY_CON31_RESET_VAL	0x0
+#define PHY_CON32_RESET_VAL	0x0
+#define PHY_CON33_RESET_VAL	0x0
+
+#define SL_DLL_DYN_CON_EN	(1 << 1)
+#define FP_RESYNC	(1 << 3)
+#define CTRL_START	(1 << 6)
+
+#define DMC_AREF_EN		(1 << 5)
+#define DMC_CONCONTROL_EMPTY	(1 << 8)
+#define DFI_INIT_START		(1 << 28)
+
+#define DMC_MEMCONTROL_VAL	0x00312700
+#define CLK_STOP_EN		(1 << 0)
+#define DPWRDN_EN		(1 << 1)
+#define DSREF_EN		(1 << 5)
+
+#define MEMBASECONFIG_CHIP_MASK_VAL	0x7E0
+#define MEMBASECONFIG_CHIP_MASK_OFFSET	0
+#define MEMBASECONFIG0_CHIP_BASE_VAL	0x20
+#define MEMBASECONFIG1_CHIP_BASE_VAL	0x40
+#define CHIP_BASE_OFFSET		16
+
+#define MEMCONFIG_VAL	0x1323
+#define PRECHCONFIG_DEFAULT_VAL	0xFF000000
+#define PWRDNCONFIG_DEFAULT_VAL	0xFFFF00FF
+
+#define TIMINGAREF_VAL	0x5d
+#define TIMINGROW_VAL	0x345A8692
+#define TIMINGDATA_VAL	0x3630065C
+#define TIMINGPOWER_VAL	0x50380336
+#define DFI_INIT_COMPLETE	(1 << 3)
+
+#define BRBRSVCONTROL_VAL	0x00000033
+#define BRBRSVCONFIG_VAL	0x88778877
+
+/* Clock Gating Control (CGCONTROL) register */
+#define MEMIF_CG_EN	(1 << 3) /* Memory interface clock gating */
+#define SCG_CG_EN	(1 << 2) /* Scheduler clock gating */
+#define BUSIF_WR_CG_EN	(1 << 1) /* Bus interface write channel clock gating */
+#define BUSIF_RD_CG_EN	(1 << 0) /* Bus interface read channel clock gating */
+#define DMC_INTERNAL_CG	(MEMIF_CG_EN | SCG_CG_EN | \
+				 BUSIF_WR_CG_EN | BUSIF_RD_CG_EN)
+
+/* DMC PHY Control0 register */
+#define PHY_CONTROL0_RESET_VAL	0x0
+#define MEM_TERM_EN	(1 << 31)	/* Termination enable for memory */
+#define PHY_TERM_EN	(1 << 30)	/* Termination enable for PHY */
+#define DMC_CTRL_SHGATE	(1 << 29)	/* Duration of DQS gating signal */
+#define FP_RSYNC	(1 << 3)	/* Force DLL resyncronization */
+
+/* Driver strength for CK, CKE, CS & CA */
+#define IMP_OUTPUT_DRV_40_OHM	0x5
+#define IMP_OUTPUT_DRV_30_OHM	0x7
+#define DA_3_DS_OFFSET		25
+#define DA_2_DS_OFFSET		22
+#define DA_1_DS_OFFSET		19
+#define DA_0_DS_OFFSET		16
+#define CA_CK_DRVR_DS_OFFSET	9
+#define CA_CKE_DRVR_DS_OFFSET	6
+#define CA_CS_DRVR_DS_OFFSET	3
+#define CA_ADR_DRVR_DS_OFFSET	0
+
+#define PHY_CON42_CTRL_BSTLEN_SHIFT	8
+#define PHY_CON42_CTRL_RDLAT_SHIFT	0
+
+/*
+ * Definitions that differ with SoC's.
+ * Below is the part defining macros for Exynos5250.
+ * Else part introduces macros for Exynos5420.
+ */
+#ifndef CONFIG_EXYNOS5420
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL	(0x00203800)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL   (0x00203800)
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL	(0x00203800)
+
+/* DPLL_CON1 */
+#define DPLL_CON1_VAL	(NOT_AVAILABLE)
+
+/* GPLL_CON1 */
+#define GPLL_CON1_VAL	(0x00203800)
+
+/* EPLL_CON1, CON2 */
+#define EPLL_CON1_VAL	0x00000000
+#define EPLL_CON2_VAL	0x00000080
+
+/* VPLL_CON1, CON2 */
+#define VPLL_CON1_VAL	0x00000000
+#define VPLL_CON2_VAL	0x00000080
+
+/* RPLL_CON1, CON2 */
+#define RPLL_CON1_VAL	NOT_AVAILABLE
+#define RPLL_CON2_VAL	NOT_AVAILABLE
+
+/* BPLL_CON1 */
+#define BPLL_CON1_VAL	0x00203800
+
+/* SPLL_CON1 */
+#define SPLL_CON1_VAL	NOT_AVAILABLE
+
+/* IPLL_CON1 */
+#define IPLL_CON1_VAL	NOT_AVAILABLE
+
+/* KPLL_CON1 */
+#define KPLL_CON1_VAL	NOT_AVAILABLE
+
+/* CLK_SRC_ISP */
+#define CLK_SRC_ISP_VAL		NOT_AVAILABLE
+#define CLK_DIV_ISP0_VAL	0x31
+#define CLK_DIV_ISP1_VAL	0x0
+
+/* CLK_FSYS */
+#define CLK_SRC_FSYS0_VAL              0x66666
+#define CLK_DIV_FSYS0_VAL	       0x0BB00000
+#define CLK_DIV_FSYS1_VAL	       NOT_AVAILABLE
+#define CLK_DIV_FSYS2_VAL	       NOT_AVAILABLE
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL,  1 = SCLKMPLL */
+#define MUX_HPM_SEL             0
+#define MUX_CPU_SEL             0
+#define MUX_APLL_SEL            1
+
+#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \
+				| (MUX_CPU_SEL << 16)  \
+				| (MUX_APLL_SEL))
+
+/* CLK_SRC_CDREX */
+#define CLK_SRC_CDREX_VAL       0x1
+
+/* CLK_DIV_CDREX */
+#define CLK_DIV_CDREX0_VAL	NOT_AVAILABLE
+#define CLK_DIV_CDREX1_VAL	NOT_AVAILABLE
+
+/* CLK_DIV_CPU0_VAL */
+#define CLK_DIV_CPU0_VAL	NOT_AVAILABLE
+
+#define MCLK_CDREX2_RATIO       0x0
+#define ACLK_EFCON_RATIO        0x1
+#define MCLK_DPHY_RATIO		0x1
+#define MCLK_CDREX_RATIO	0x1
+#define ACLK_C2C_200_RATIO	0x1
+#define C2C_CLK_400_RATIO	0x1
+#define PCLK_CDREX_RATIO	0x1
+#define ACLK_CDREX_RATIO	0x1
+
+#define CLK_DIV_CDREX_VAL	((MCLK_DPHY_RATIO << 24)        \
+				| (C2C_CLK_400_RATIO << 6)	\
+				| (PCLK_CDREX_RATIO << 4)	\
+				| (ACLK_CDREX_RATIO))
+
+/* CLK_SRC_TOP0	*/
+#define MUX_ACLK_300_GSCL_SEL           0x0
+#define MUX_ACLK_300_GSCL_MID_SEL       0x0
+#define MUX_ACLK_400_G3D_MID_SEL        0x0
+#define MUX_ACLK_333_SEL	        0x0
+#define MUX_ACLK_300_DISP1_SEL	        0x0
+#define MUX_ACLK_300_DISP1_MID_SEL      0x0
+#define MUX_ACLK_200_SEL	        0x0
+#define MUX_ACLK_166_SEL	        0x0
+#define CLK_SRC_TOP0_VAL	((MUX_ACLK_300_GSCL_SEL  << 25)		\
+				| (MUX_ACLK_300_GSCL_MID_SEL << 24)	\
+				| (MUX_ACLK_400_G3D_MID_SEL << 20)	\
+				| (MUX_ACLK_333_SEL << 16)		\
+				| (MUX_ACLK_300_DISP1_SEL << 15)	\
+				| (MUX_ACLK_300_DISP1_MID_SEL << 14)	\
+				| (MUX_ACLK_200_SEL << 12)		\
+				| (MUX_ACLK_166_SEL << 8))
+
+/* CLK_SRC_TOP1	*/
+#define MUX_ACLK_400_G3D_SEL            0x1
+#define MUX_ACLK_400_ISP_SEL            0x0
+#define MUX_ACLK_400_IOP_SEL            0x0
+#define MUX_ACLK_MIPI_HSI_TXBASE_SEL    0x0
+#define MUX_ACLK_300_GSCL_MID1_SEL      0x0
+#define MUX_ACLK_300_DISP1_MID1_SEL     0x0
+#define CLK_SRC_TOP1_VAL	((MUX_ACLK_400_G3D_SEL << 28)           \
+				|(MUX_ACLK_400_ISP_SEL << 24)           \
+				|(MUX_ACLK_400_IOP_SEL << 20)           \
+				|(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16)   \
+				|(MUX_ACLK_300_GSCL_MID1_SEL << 12)     \
+				|(MUX_ACLK_300_DISP1_MID1_SEL << 8))
+
+/* CLK_SRC_TOP2 */
+#define MUX_GPLL_SEL                    0x1
+#define MUX_BPLL_USER_SEL               0x0
+#define MUX_MPLL_USER_SEL               0x0
+#define MUX_VPLL_SEL                    0x1
+#define MUX_EPLL_SEL                    0x1
+#define MUX_CPLL_SEL                    0x1
+#define VPLLSRC_SEL                     0x0
+#define CLK_SRC_TOP2_VAL	((MUX_GPLL_SEL << 28)		\
+				| (MUX_BPLL_USER_SEL << 24)	\
+				| (MUX_MPLL_USER_SEL << 20)	\
+				| (MUX_VPLL_SEL << 16)	        \
+				| (MUX_EPLL_SEL << 12)	        \
+				| (MUX_CPLL_SEL << 8)           \
+				| (VPLLSRC_SEL))
+/* CLK_SRC_TOP3 */
+#define MUX_ACLK_333_SUB_SEL            0x1
+#define MUX_ACLK_400_SUB_SEL            0x1
+#define MUX_ACLK_266_ISP_SUB_SEL        0x1
+#define MUX_ACLK_266_GPS_SUB_SEL        0x0
+#define MUX_ACLK_300_GSCL_SUB_SEL       0x1
+#define MUX_ACLK_266_GSCL_SUB_SEL       0x1
+#define MUX_ACLK_300_DISP1_SUB_SEL      0x1
+#define MUX_ACLK_200_DISP1_SUB_SEL      0x1
+#define CLK_SRC_TOP3_VAL	((MUX_ACLK_333_SUB_SEL << 24)	        \
+				| (MUX_ACLK_400_SUB_SEL << 20)	        \
+				| (MUX_ACLK_266_ISP_SUB_SEL << 16)	\
+				| (MUX_ACLK_266_GPS_SUB_SEL << 12)      \
+				| (MUX_ACLK_300_GSCL_SUB_SEL << 10)     \
+				| (MUX_ACLK_266_GSCL_SUB_SEL << 8)      \
+				| (MUX_ACLK_300_DISP1_SUB_SEL << 6)     \
+				| (MUX_ACLK_200_DISP1_SUB_SEL << 4))
+
+#define CLK_SRC_TOP4_VAL	NOT_AVAILABLE
+#define CLK_SRC_TOP5_VAL	NOT_AVAILABLE
+#define CLK_SRC_TOP6_VAL	NOT_AVAILABLE
+#define CLK_SRC_TOP7_VAL	NOT_AVAILABLE
+
+/* CLK_DIV_TOP0	*/
+#define ACLK_300_DISP1_RATIO	0x2
+#define ACLK_400_G3D_RATIO	0x0
+#define ACLK_333_RATIO		0x0
+#define ACLK_266_RATIO		0x2
+#define ACLK_200_RATIO		0x3
+#define ACLK_166_RATIO		0x1
+#define ACLK_133_RATIO		0x1
+#define ACLK_66_RATIO		0x5
+
+#define CLK_DIV_TOP0_VAL	((ACLK_300_DISP1_RATIO << 28)	\
+				| (ACLK_400_G3D_RATIO << 24)	\
+				| (ACLK_333_RATIO  << 20)	\
+				| (ACLK_266_RATIO << 16)	\
+				| (ACLK_200_RATIO << 12)	\
+				| (ACLK_166_RATIO << 8)		\
+				| (ACLK_133_RATIO << 4)		\
+				| (ACLK_66_RATIO))
+
+/* CLK_DIV_TOP1	*/
+#define ACLK_MIPI_HSI_TX_BASE_RATIO     0x3
+#define ACLK_66_PRE_RATIO               0x1
+#define ACLK_400_ISP_RATIO              0x1
+#define ACLK_400_IOP_RATIO              0x1
+#define ACLK_300_GSCL_RATIO             0x2
+
+#define CLK_DIV_TOP1_VAL	((ACLK_MIPI_HSI_TX_BASE_RATIO << 28)	\
+				| (ACLK_66_PRE_RATIO << 24)		\
+				| (ACLK_400_ISP_RATIO  << 20)		\
+				| (ACLK_400_IOP_RATIO << 16)		\
+				| (ACLK_300_GSCL_RATIO << 12))
+
+#define CLK_DIV_TOP2_VAL	NOT_AVAILABLE
+
+/* PLL Lock Value Factor */
+#define PLL_LOCK_FACTOR		250
+#define PLL_X_LOCK_FACTOR	3000
+
+/* CLK_SRC_PERIC0 */
+#define PWM_SEL		6
+#define UART3_SEL	6
+#define UART2_SEL	6
+#define UART1_SEL	6
+#define UART0_SEL	6
+/* SRC_CLOCK = SCLK_MPLL */
+#define CLK_SRC_PERIC0_VAL	((PWM_SEL << 24)        \
+				| (UART3_SEL << 12)     \
+				| (UART2_SEL << 8)       \
+				| (UART1_SEL << 4)      \
+				| (UART0_SEL))
+
+/* CLK_SRC_PERIC1 */
+/* SRC_CLOCK = SCLK_MPLL */
+#define SPI0_SEL		6
+#define SPI1_SEL		6
+#define SPI2_SEL		6
+#define CLK_SRC_PERIC1_VAL	((SPI2_SEL << 24) \
+				| (SPI1_SEL << 20) \
+				| (SPI0_SEL << 16))
+
+/* CLK_DIV_PERIL0	*/
+#define UART5_RATIO	7
+#define UART4_RATIO	7
+#define UART3_RATIO	7
+#define UART2_RATIO	7
+#define UART1_RATIO	7
+#define UART0_RATIO	7
+
+#define CLK_DIV_PERIC0_VAL	((UART3_RATIO << 12)    \
+				| (UART2_RATIO << 8)    \
+				| (UART1_RATIO << 4)    \
+				| (UART0_RATIO))
+/* CLK_DIV_PERIC1 */
+#define SPI1_RATIO		0x7
+#define SPI0_RATIO		0xf
+#define SPI1_SUB_RATIO		0x0
+#define SPI0_SUB_RATIO		0x0
+#define CLK_DIV_PERIC1_VAL	((SPI1_SUB_RATIO << 24) \
+				| ((SPI1_RATIO << 16) \
+				| (SPI0_SUB_RATIO << 8) \
+				| (SPI0_RATIO << 0)))
+
+/* CLK_DIV_PERIC2 */
+#define SPI2_RATIO		0xf
+#define SPI2_SUB_RATIO		0x0
+#define CLK_DIV_PERIC2_VAL	((SPI2_SUB_RATIO << 8) \
+				| (SPI2_RATIO << 0))
+
+/* CLK_DIV_PERIC3 */
+#define PWM_RATIO		8
+#define CLK_DIV_PERIC3_VAL	(PWM_RATIO << 0)
+
+
+/* CLK_DIV_PERIC4 */
+#define CLK_DIV_PERIC4_VAL	NOT_AVAILABLE
+
+/* CLK_SRC_DISP1_0 */
+#define CLK_SRC_DISP1_0_VAL	0x6
+#define CLK_DIV_DISP1_0_VAL	NOT_AVAILABLE
+
+#define APLL_FOUT		(1 << 0)
+#define KPLL_FOUT		NOT_AVAILABLE
+
+#define CLK_DIV_CPERI1_VAL	NOT_AVAILABLE
+
+#else
+
+#define CPU_CONFIG_STATUS_OFFSET	0x80
+#define CPU_RST_FLAG_VAL		0xFCBA0D10
+#define PAD_RETENTION_DRAM_COREBLK_VAL	0x10000000
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL	(0x0020F300)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL   (0x0020F300)
+
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL	0x0020f300
+
+/* DPLL_CON1 */
+#define DPLL_CON1_VAL	(0x0020F300)
+
+/* GPLL_CON1 */
+#define GPLL_CON1_VAL	(NOT_AVAILABLE)
+
+
+/* EPLL_CON1, CON2 */
+#define EPLL_CON1_VAL	0x00000000
+#define EPLL_CON2_VAL	0x00000080
+
+/* VPLL_CON1, CON2 */
+#define VPLL_CON1_VAL	0x0020f300
+#define VPLL_CON2_VAL	NOT_AVAILABLE
+
+/* RPLL_CON1, CON2 */
+#define RPLL_CON1_VAL	0x00000000
+#define RPLL_CON2_VAL	0x00000080
+
+/* BPLL_CON1 */
+#define BPLL_CON1_VAL	0x0020f300
+
+/* SPLL_CON1 */
+#define SPLL_CON1_VAL	0x0020f300
+
+/* IPLL_CON1 */
+#define IPLL_CON1_VAL	0x00000080
+
+/* KPLL_CON1 */
+#define KPLL_CON1_VAL	0x200000
+
+/* CLK_SRC_ISP */
+#define CLK_SRC_ISP_VAL		0x33366000
+#define CLK_DIV_ISP0_VAL	0x13131300
+#define CLK_DIV_ISP1_VAL	0xbb110202
+
+
+/* CLK_FSYS */
+#define CLK_SRC_FSYS0_VAL              0x33033300
+#define CLK_DIV_FSYS0_VAL	       0x0
+#define CLK_DIV_FSYS1_VAL	       0x04f13c4f
+#define CLK_DIV_FSYS2_VAL	       0x041d0000
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL,  1 = SCLKMPLL */
+#define MUX_HPM_SEL             1
+#define MUX_CPU_SEL             0
+#define MUX_APLL_SEL            1
+
+#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \
+				| (MUX_CPU_SEL << 16)  \
+				| (MUX_APLL_SEL))
+
+/* CLK_SRC_CDREX */
+#define CLK_SRC_CDREX_VAL       0x00000011
+
+/* CLK_DIV_CDREX */
+#define CLK_DIV_CDREX0_VAL	0x30010100
+#define CLK_DIV_CDREX1_VAL	0x300
+
+#define CLK_DIV_CDREX_VAL       0x17010100
+
+/* CLK_DIV_CPU0_VAL */
+#define CLK_DIV_CPU0_VAL	0x01440020
+
+/* CLK_SRC_TOP */
+#define CLK_SRC_TOP0_VAL	0x12221222
+#define CLK_SRC_TOP1_VAL	0x00100200
+#define CLK_SRC_TOP2_VAL	0x11101000
+#define CLK_SRC_TOP3_VAL	0x11111111
+#define CLK_SRC_TOP4_VAL	0x11110111
+#define CLK_SRC_TOP5_VAL	0x11111101
+#define CLK_SRC_TOP6_VAL	0x11110111
+#define CLK_SRC_TOP7_VAL	0x00022200
+
+/* CLK_DIV_TOP */
+#define CLK_DIV_TOP0_VAL	0x23712311
+#define CLK_DIV_TOP1_VAL	0x13100B00
+#define CLK_DIV_TOP2_VAL	0x11101100
+
+/* PLL Lock Value Factor */
+#define PLL_LOCK_FACTOR		200
+#define PLL_X_LOCK_FACTOR	3000
+
+/* CLK_SRC_PERIC0 */
+#define SPDIF_SEL	1
+#define PWM_SEL		3
+#define UART4_SEL	3
+#define UART3_SEL	3
+#define UART2_SEL	3
+#define UART1_SEL	3
+#define UART0_SEL	3
+/* SRC_CLOCK = SCLK_RPLL */
+#define CLK_SRC_PERIC0_VAL	((SPDIF_SEL << 28)	\
+				| (PWM_SEL << 24)	\
+				| (UART4_SEL << 20)	\
+				| (UART3_SEL << 16)	\
+				| (UART2_SEL << 12)	\
+				| (UART1_SEL << 8)	\
+				| (UART0_SEL << 4))
+
+/* CLK_SRC_PERIC1 */
+/* SRC_CLOCK = SCLK_EPLL */
+#define SPI0_SEL		6
+#define SPI1_SEL		6
+#define SPI2_SEL		6
+#define AUDIO0_SEL		6
+#define AUDIO1_SEL		6
+#define AUDIO2_SEL		6
+#define CLK_SRC_PERIC1_VAL	((SPI2_SEL << 28)	\
+				| (SPI1_SEL << 24)	\
+				| (SPI0_SEL << 20)	\
+				| (AUDIO2_SEL << 16)	\
+				| (AUDIO2_SEL << 12)	\
+				| (AUDIO2_SEL << 8))
+
+/* CLK_DIV_PERIC0 */
+#define PWM_RATIO	8
+#define UART4_RATIO	9
+#define UART3_RATIO	9
+#define UART2_RATIO	9
+#define UART1_RATIO	9
+#define UART0_RATIO	9
+
+#define CLK_DIV_PERIC0_VAL	((PWM_RATIO << 28)	\
+				| (UART4_RATIO << 24)	\
+				| (UART3_RATIO << 20)    \
+				| (UART2_RATIO << 16)    \
+				| (UART1_RATIO << 12)    \
+				| (UART0_RATIO << 8))
+/* CLK_DIV_PERIC1 */
+#define SPI2_RATIO		0x1
+#define SPI1_RATIO		0x1
+#define SPI0_RATIO		0x1
+#define CLK_DIV_PERIC1_VAL	((SPI2_RATIO << 28)	\
+				| (SPI1_RATIO << 24)	\
+				| (SPI0_RATIO << 20))
+
+/* CLK_DIV_PERIC2 */
+#define PCM2_RATIO		0x3
+#define PCM1_RATIO		0x3
+#define CLK_DIV_PERIC2_VAL	((PCM2_RATIO << 24) \
+				| (PCM1_RATIO << 16))
+
+/* CLK_DIV_PERIC3 */
+#define AUDIO2_RATIO		0x5
+#define AUDIO1_RATIO		0x5
+#define AUDIO0_RATIO		0x5
+#define CLK_DIV_PERIC3_VAL	((AUDIO2_RATIO << 28)	\
+				| (AUDIO1_RATIO << 24)	\
+				| (AUDIO0_RATIO << 20))
+
+/* CLK_DIV_PERIC4 */
+#define SPI2_PRE_RATIO		0x2
+#define SPI1_PRE_RATIO		0x2
+#define SPI0_PRE_RATIO		0x2
+#define CLK_DIV_PERIC4_VAL	((SPI2_PRE_RATIO << 24)	\
+				| (SPI1_PRE_RATIO << 16) \
+				| (SPI0_PRE_RATIO << 8))
+
+/* CLK_SRC_DISP1_0 */
+#define CLK_SRC_DISP1_0_VAL	0x10666600
+#define CLK_DIV_DISP1_0_VAL	0x01050211
+
+#define APLL_FOUT		(1 << 0)
+#define KPLL_FOUT		(1 << 0)
+
+#define CLK_DIV_CPERI1_VAL	0x3f3f0000
+#endif
+
+struct mem_timings;
+
+/* Errors that we can encourter in low-level setup */
+enum {
+	SETUP_ERR_OK,
+	SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1,
+	SETUP_ERR_ZQ_CALIBRATION_FAILURE = -2,
+};
+
+/*
+ * Memory variant specific initialization code for DDR3
+ *
+ * @param mem          Memory timings for this memory type.
+ * @param reset         Reset DDR PHY during initialization.
+ * @return 0 if ok, SETUP_ERR_... if there is a problem
+ */
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset);
+
+/* Memory variant specific initialization code for LPDDR3 */
+void lpddr3_mem_ctrl_init(void);
+
+/*
+ * Configure ZQ I/O interface
+ *
+ * @param mem		Memory timings for this memory type.
+ * @param phy0_con16	Register address for dmc_phy0->phy_con16
+ * @param phy1_con16	Register address for dmc_phy1->phy_con16
+ * @param phy0_con17	Register address for dmc_phy0->phy_con17
+ * @param phy1_con17	Register address for dmc_phy1->phy_con17
+ * @return 0 if ok, -1 on error
+ */
+int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16,
+			uint32_t *phy1_con16, uint32_t *phy0_con17,
+			uint32_t *phy1_con17);
+/*
+ * Send NOP and MRS/EMRS Direct commands
+ *
+ * @param mem		Memory timings for this memory type.
+ * @param directcmd	Register address for dmc_phy->directcmd
+ */
+void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd);
+
+/*
+ * Send PALL Direct commands
+ *
+ * @param mem		Memory timings for this memory type.
+ * @param directcmd	Register address for dmc_phy->directcmd
+ */
+void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd);
+
+/*
+ * Reset the DLL. This function is common between DDR3 and LPDDR2.
+ * However, the reset value is different. So we are passing a flag
+ * ddr_mode to distinguish between LPDDR2 and DDR3.
+ *
+ * @param phycontrol0	Register address for dmc_phy->phycontrol0
+ * @param ddr_mode	Type of DDR memory
+ */
+void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/adc.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/adc.h
new file mode 100644
index 000000000..c5ce6050f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/adc.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2010 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_ADC_H_
+#define __ASM_ARM_ARCH_ADC_H_
+
+#define ADC_V2_CON1_SOFT_RESET		(0x2 << 1)
+#define ADC_V2_CON1_STC_EN		0x1
+
+#define ADC_V2_CON2_OSEL(x)		(((x) & 0x1) << 10)
+#define OSEL_2S				0x0
+#define OSEL_BINARY			0x1
+#define ADC_V2_CON2_ESEL(x)		(((x) & 0x1) << 9)
+#define ESEL_ADC_EVAL_TIME_40CLK	0x0
+#define ESEL_ADC_EVAL_TIME_20CLK	0x1
+#define ADC_V2_CON2_HIGHF(x)		(((x) & 0x1) << 8)
+#define HIGHF_CONV_RATE_30KSPS		0x0
+#define HIGHF_CONV_RATE_600KSPS		0x1
+#define ADC_V2_CON2_C_TIME(x)		(((x) & 0x7) << 4)
+#define ADC_V2_CON2_CHAN_SEL_MASK	0xf
+#define ADC_V2_CON2_CHAN_SEL(x)		((x) & ADC_V2_CON2_CHAN_SEL_MASK)
+
+#define ADC_V2_GET_STATUS_FLAG(x)	(((x) >> 2) & 0x1)
+#define FLAG_CONV_END			0x1
+
+#define ADC_V2_INT_DISABLE		0x0
+#define ADC_V2_INT_ENABLE		0x1
+#define INT_NOT_GENERATED		0x0
+#define INT_GENERATED			0x1
+
+#define ADC_V2_VERSION			0x80000008
+
+#define ADC_V2_MAX_CHANNEL		9
+
+/* For default 8 time convertion with sample rate 600 kSPS - 15us timeout */
+#define ADC_V2_CONV_TIMEOUT_US		15
+
+#define ADC_V2_DAT_MASK			0xfff
+
+#ifndef __ASSEMBLY__
+struct s5p_adc {
+	unsigned int adccon;
+	unsigned int adctsc;
+	unsigned int adcdly;
+	unsigned int adcdat0;
+	unsigned int adcdat1;
+	unsigned int adcupdn;
+	unsigned int adcclrint;
+	unsigned int adcmux;
+	unsigned int adcclrintpndnup;
+};
+
+struct exynos_adc_v2 {
+	unsigned int con1;
+	unsigned int con2;
+	unsigned int status;
+	unsigned int dat;
+	unsigned int int_en;
+	unsigned int int_status;
+	unsigned int reserved[2];
+	unsigned int version;
+};
+#endif
+
+#endif /* __ASM_ARM_ARCH_ADC_H_ */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/board.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/board.h
new file mode 100644
index 000000000..44ebdb829
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/board.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ */
+
+#ifndef _EXYNOS_BOARD_H
+#define _EXYNOS_BOARD_H
+
+/*
+ * Exynos baord specific changes for
+ * board_init
+ */
+int exynos_init(void);
+
+/*
+ * Exynos board specific changes for
+ * board_early_init_f
+ */
+int exynos_early_init_f(void);
+
+/*
+ * Exynos board specific changes for
+ * board_power_init
+ */
+int exynos_power_init(void);
+
+#endif	/* EXYNOS_BOARD_H */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/clk.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/clk.h
new file mode 100644
index 000000000..298535dc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/clk.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_CLK_H_
+#define __ASM_ARM_ARCH_CLK_H_
+
+#define APLL	0
+#define MPLL	1
+#define EPLL	2
+#define HPLL	3
+#define VPLL	4
+#define BPLL	5
+#define RPLL	6
+#define SPLL	7
+#define CPLL	8
+#define DPLL	9
+#define IPLL	10
+
+#define MASK_PRE_RATIO(x)	(0xff << ((x << 4) + 8))
+#define MASK_RATIO(x)		(0xf << (x << 4))
+#define SET_PRE_RATIO(x, y)	((y & 0xff) << ((x << 4) + 8))
+#define SET_RATIO(x, y)		((y & 0xf) << (x << 4))
+
+enum pll_src_bit {
+	EXYNOS_SRC_MPLL = 6,
+	EXYNOS_SRC_EPLL,
+	EXYNOS_SRC_VPLL,
+	EXYNOS542X_SRC_MPLL = 3,
+	EXYNOS542X_SRC_SPLL,
+	EXYNOS542X_SRC_EPLL = 6,
+	EXYNOS542X_SRC_RPLL,
+};
+
+unsigned long get_pll_clk(int pllreg);
+unsigned long get_arm_clk(void);
+unsigned long get_i2c_clk(void);
+unsigned long get_pwm_clk(void);
+unsigned long get_uart_clk(int dev_index);
+unsigned long get_mmc_clk(int dev_index);
+void set_mmc_clk(int dev_index, unsigned int div);
+unsigned long get_lcd_clk(void);
+void set_lcd_clk(void);
+void set_mipi_clk(void);
+int set_i2s_clk_source(unsigned int i2s_id);
+int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq,
+				unsigned int i2s_id);
+int set_epll_clk(unsigned long rate);
+int set_spi_clk(int periph_id, unsigned int rate);
+
+/**
+ * get the clk frequency of the required peripheral
+ *
+ * @param peripheral	Peripheral id
+ *
+ * @return frequency of the peripheral clk
+ */
+unsigned long clock_get_periph_rate(int peripheral);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/clock.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/clock.h
new file mode 100644
index 000000000..9d23c476f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/clock.h
@@ -0,0 +1,1396 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_CLOCK_H_
+#define __ASM_ARM_ARCH_CLOCK_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+struct exynos4_clock {
+	unsigned char	res1[0x4200];
+	unsigned int	src_leftbus;
+	unsigned char	res2[0x1fc];
+	unsigned int	mux_stat_leftbus;
+	unsigned char	res4[0xfc];
+	unsigned int	div_leftbus;
+	unsigned char	res5[0xfc];
+	unsigned int	div_stat_leftbus;
+	unsigned char	res6[0x1fc];
+	unsigned int	gate_ip_leftbus;
+	unsigned char	res7[0x1fc];
+	unsigned int	clkout_leftbus;
+	unsigned int	clkout_leftbus_div_stat;
+	unsigned char	res8[0x37f8];
+	unsigned int	src_rightbus;
+	unsigned char	res9[0x1fc];
+	unsigned int	mux_stat_rightbus;
+	unsigned char	res10[0xfc];
+	unsigned int	div_rightbus;
+	unsigned char	res11[0xfc];
+	unsigned int	div_stat_rightbus;
+	unsigned char	res12[0x1fc];
+	unsigned int	gate_ip_rightbus;
+	unsigned char	res13[0x1fc];
+	unsigned int	clkout_rightbus;
+	unsigned int	clkout_rightbus_div_stat;
+	unsigned char	res14[0x3608];
+	unsigned int	epll_lock;
+	unsigned char	res15[0xc];
+	unsigned int	vpll_lock;
+	unsigned char	res16[0xec];
+	unsigned int	epll_con0;
+	unsigned int	epll_con1;
+	unsigned char	res17[0x8];
+	unsigned int	vpll_con0;
+	unsigned int	vpll_con1;
+	unsigned char	res18[0xe8];
+	unsigned int	src_top0;
+	unsigned int	src_top1;
+	unsigned char	res19[0x8];
+	unsigned int	src_cam;
+	unsigned int	src_tv;
+	unsigned int	src_mfc;
+	unsigned int	src_g3d;
+	unsigned int	src_image;
+	unsigned int	src_lcd0;
+	unsigned int	src_lcd1;
+	unsigned int	src_maudio;
+	unsigned int	src_fsys;
+	unsigned char	res20[0xc];
+	unsigned int	src_peril0;
+	unsigned int	src_peril1;
+	unsigned char	res21[0xb8];
+	unsigned int	src_mask_top;
+	unsigned char	res22[0xc];
+	unsigned int	src_mask_cam;
+	unsigned int	src_mask_tv;
+	unsigned char	res23[0xc];
+	unsigned int	src_mask_lcd0;
+	unsigned int	src_mask_lcd1;
+	unsigned int	src_mask_maudio;
+	unsigned int	src_mask_fsys;
+	unsigned char	res24[0xc];
+	unsigned int	src_mask_peril0;
+	unsigned int	src_mask_peril1;
+	unsigned char	res25[0xb8];
+	unsigned int	mux_stat_top;
+	unsigned char	res26[0x14];
+	unsigned int	mux_stat_mfc;
+	unsigned int	mux_stat_g3d;
+	unsigned int	mux_stat_image;
+	unsigned char	res27[0xdc];
+	unsigned int	div_top;
+	unsigned char	res28[0xc];
+	unsigned int	div_cam;
+	unsigned int	div_tv;
+	unsigned int	div_mfc;
+	unsigned int	div_g3d;
+	unsigned int	div_image;
+	unsigned int	div_lcd0;
+	unsigned int	div_lcd1;
+	unsigned int	div_maudio;
+	unsigned int	div_fsys0;
+	unsigned int	div_fsys1;
+	unsigned int	div_fsys2;
+	unsigned int	div_fsys3;
+	unsigned int	div_peril0;
+	unsigned int	div_peril1;
+	unsigned int	div_peril2;
+	unsigned int	div_peril3;
+	unsigned int	div_peril4;
+	unsigned int	div_peril5;
+	unsigned char	res29[0x18];
+	unsigned int	div2_ratio;
+	unsigned char	res30[0x8c];
+	unsigned int	div_stat_top;
+	unsigned char	res31[0xc];
+	unsigned int	div_stat_cam;
+	unsigned int	div_stat_tv;
+	unsigned int	div_stat_mfc;
+	unsigned int	div_stat_g3d;
+	unsigned int	div_stat_image;
+	unsigned int	div_stat_lcd0;
+	unsigned int	div_stat_lcd1;
+	unsigned int	div_stat_maudio;
+	unsigned int	div_stat_fsys0;
+	unsigned int	div_stat_fsys1;
+	unsigned int	div_stat_fsys2;
+	unsigned int	div_stat_fsys3;
+	unsigned int	div_stat_peril0;
+	unsigned int	div_stat_peril1;
+	unsigned int	div_stat_peril2;
+	unsigned int	div_stat_peril3;
+	unsigned int	div_stat_peril4;
+	unsigned int	div_stat_peril5;
+	unsigned char	res32[0x18];
+	unsigned int	div2_stat;
+	unsigned char	res33[0x29c];
+	unsigned int	gate_ip_cam;
+	unsigned int	gate_ip_tv;
+	unsigned int	gate_ip_mfc;
+	unsigned int	gate_ip_g3d;
+	unsigned int	gate_ip_image;
+	unsigned int	gate_ip_lcd0;
+	unsigned int	gate_ip_lcd1;
+	unsigned char	res34[0x4];
+	unsigned int	gate_ip_fsys;
+	unsigned char	res35[0x8];
+	unsigned int	gate_ip_gps;
+	unsigned int	gate_ip_peril;
+	unsigned char	res36[0xc];
+	unsigned int	gate_ip_perir;
+	unsigned char	res37[0xc];
+	unsigned int	gate_block;
+	unsigned char	res38[0x8c];
+	unsigned int	clkout_cmu_top;
+	unsigned int	clkout_cmu_top_div_stat;
+	unsigned char	res39[0x37f8];
+	unsigned int	src_dmc;
+	unsigned char	res40[0xfc];
+	unsigned int	src_mask_dmc;
+	unsigned char	res41[0xfc];
+	unsigned int	mux_stat_dmc;
+	unsigned char	res42[0xfc];
+	unsigned int	div_dmc0;
+	unsigned int	div_dmc1;
+	unsigned char	res43[0xf8];
+	unsigned int	div_stat_dmc0;
+	unsigned int	div_stat_dmc1;
+	unsigned char	res44[0x2f8];
+	unsigned int	gate_ip_dmc;
+	unsigned char	res45[0xfc];
+	unsigned int	clkout_cmu_dmc;
+	unsigned int	clkout_cmu_dmc_div_stat;
+	unsigned char	res46[0x5f8];
+	unsigned int	dcgidx_map0;
+	unsigned int	dcgidx_map1;
+	unsigned int	dcgidx_map2;
+	unsigned char	res47[0x14];
+	unsigned int	dcgperf_map0;
+	unsigned int	dcgperf_map1;
+	unsigned char	res48[0x18];
+	unsigned int	dvcidx_map;
+	unsigned char	res49[0x1c];
+	unsigned int	freq_cpu;
+	unsigned int	freq_dpm;
+	unsigned char	res50[0x18];
+	unsigned int	dvsemclk_en;
+	unsigned int	maxperf;
+	unsigned char	res51[0x2f78];
+	unsigned int	apll_lock;
+	unsigned char	res52[0x4];
+	unsigned int	mpll_lock;
+	unsigned char	res53[0xf4];
+	unsigned int	apll_con0;
+	unsigned int	apll_con1;
+	unsigned int	mpll_con0;
+	unsigned int	mpll_con1;
+	unsigned char	res54[0xf0];
+	unsigned int	src_cpu;
+	unsigned char	res55[0x1fc];
+	unsigned int	mux_stat_cpu;
+	unsigned char	res56[0xfc];
+	unsigned int	div_cpu0;
+	unsigned int	div_cpu1;
+	unsigned char	res57[0xf8];
+	unsigned int	div_stat_cpu0;
+	unsigned int	div_stat_cpu1;
+	unsigned char	res58[0x3f8];
+	unsigned int	clkout_cmu_cpu;
+	unsigned int	clkout_cmu_cpu_div_stat;
+	unsigned char	res59[0x5f8];
+	unsigned int	armclk_stopctrl;
+	unsigned int	atclk_stopctrl;
+	unsigned char	res60[0x8];
+	unsigned int	parityfail_status;
+	unsigned int	parityfail_clear;
+	unsigned char	res61[0xe8];
+	unsigned int	apll_con0_l8;
+	unsigned int	apll_con0_l7;
+	unsigned int	apll_con0_l6;
+	unsigned int	apll_con0_l5;
+	unsigned int	apll_con0_l4;
+	unsigned int	apll_con0_l3;
+	unsigned int	apll_con0_l2;
+	unsigned int	apll_con0_l1;
+	unsigned int	iem_control;
+	unsigned char	res62[0xdc];
+	unsigned int	apll_con1_l8;
+	unsigned int	apll_con1_l7;
+	unsigned int	apll_con1_l6;
+	unsigned int	apll_con1_l5;
+	unsigned int	apll_con1_l4;
+	unsigned int	apll_con1_l3;
+	unsigned int	apll_con1_l2;
+	unsigned int	apll_con1_l1;
+	unsigned char	res63[0xe0];
+	unsigned int	div_iem_l8;
+	unsigned int	div_iem_l7;
+	unsigned int	div_iem_l6;
+	unsigned int	div_iem_l5;
+	unsigned int	div_iem_l4;
+	unsigned int	div_iem_l3;
+	unsigned int	div_iem_l2;
+	unsigned int	div_iem_l1;
+};
+
+struct exynos4x12_clock {
+	unsigned char	res1[0x4200];
+	unsigned int	src_leftbus;
+	unsigned char	res2[0x1fc];
+	unsigned int	mux_stat_leftbus;
+	unsigned char	res3[0xfc];
+	unsigned int	div_leftbus;
+	unsigned char	res4[0xfc];
+	unsigned int	div_stat_leftbus;
+	unsigned char	res5[0x1fc];
+	unsigned int	gate_ip_leftbus;
+	unsigned char	res6[0x12c];
+	unsigned int	gate_ip_image;
+	unsigned char	res7[0xcc];
+	unsigned int	clkout_leftbus;
+	unsigned int	clkout_leftbus_div_stat;
+	unsigned char	res8[0x37f8];
+	unsigned int	src_rightbus;
+	unsigned char	res9[0x1fc];
+	unsigned int	mux_stat_rightbus;
+	unsigned char	res10[0xfc];
+	unsigned int	div_rightbus;
+	unsigned char	res11[0xfc];
+	unsigned int	div_stat_rightbus;
+	unsigned char	res12[0x1fc];
+	unsigned int	gate_ip_rightbus;
+	unsigned char	res13[0x15c];
+	unsigned int	gate_ip_perir;
+	unsigned char	res14[0x9c];
+	unsigned int	clkout_rightbus;
+	unsigned int	clkout_rightbus_div_stat;
+	unsigned char	res15[0x3608];
+	unsigned int	epll_lock;
+	unsigned char	res16[0xc];
+	unsigned int	vpll_lock;
+	unsigned char	res17[0xec];
+	unsigned int	epll_con0;
+	unsigned int	epll_con1;
+	unsigned int	epll_con2;
+	unsigned char	res18[0x4];
+	unsigned int	vpll_con0;
+	unsigned int	vpll_con1;
+	unsigned int	vpll_con2;
+	unsigned char	res19[0xe4];
+	unsigned int	src_top0;
+	unsigned int	src_top1;
+	unsigned char	res20[0x8];
+	unsigned int	src_cam;
+	unsigned int	src_tv;
+	unsigned int	src_mfc;
+	unsigned int	src_g3d;
+	unsigned char	res21[0x4];
+	unsigned int	src_lcd;
+	unsigned int	src_isp;
+	unsigned int	src_maudio;
+	unsigned int	src_fsys;
+	unsigned char	res22[0xc];
+	unsigned int	src_peril0;
+	unsigned int	src_peril1;
+	unsigned int	src_cam1;
+	unsigned char	res23[0xb4];
+	unsigned int	src_mask_top;
+	unsigned char	res24[0xc];
+	unsigned int	src_mask_cam;
+	unsigned int	src_mask_tv;
+	unsigned char	res25[0xc];
+	unsigned int	src_mask_lcd;
+	unsigned int	src_mask_isp;
+	unsigned int	src_mask_maudio;
+	unsigned int	src_mask_fsys;
+	unsigned char	res26[0xc];
+	unsigned int	src_mask_peril0;
+	unsigned int	src_mask_peril1;
+	unsigned char	res27[0xb8];
+	unsigned int	mux_stat_top0;
+	unsigned int	mux_stat_top1;
+	unsigned char	res28[0x10];
+	unsigned int	mux_stat_mfc;
+	unsigned int	mux_stat_g3d;
+	unsigned char	res29[0x28];
+	unsigned int	mux_stat_cam1;
+	unsigned char	res30[0xb4];
+	unsigned int	div_top;
+	unsigned char	res31[0xc];
+	unsigned int	div_cam;
+	unsigned int	div_tv;
+	unsigned int	div_mfc;
+	unsigned int	div_g3d;
+	unsigned char	res32[0x4];
+	unsigned int	div_lcd;
+	unsigned int	div_isp;
+	unsigned int	div_maudio;
+	unsigned int	div_fsys0;
+	unsigned int	div_fsys1;
+	unsigned int	div_fsys2;
+	unsigned int	div_fsys3;
+	unsigned int	div_peril0;
+	unsigned int	div_peril1;
+	unsigned int	div_peril2;
+	unsigned int	div_peril3;
+	unsigned int	div_peril4;
+	unsigned int	div_peril5;
+	unsigned int	div_cam1;
+	unsigned char	res33[0x14];
+	unsigned int	div2_ratio;
+	unsigned char	res34[0x8c];
+	unsigned int	div_stat_top;
+	unsigned char	res35[0xc];
+	unsigned int	div_stat_cam;
+	unsigned int	div_stat_tv;
+	unsigned int	div_stat_mfc;
+	unsigned int	div_stat_g3d;
+	unsigned char	res36[0x4];
+	unsigned int	div_stat_lcd;
+	unsigned int	div_stat_isp;
+	unsigned int	div_stat_maudio;
+	unsigned int	div_stat_fsys0;
+	unsigned int	div_stat_fsys1;
+	unsigned int	div_stat_fsys2;
+	unsigned int	div_stat_fsys3;
+	unsigned int	div_stat_peril0;
+	unsigned int	div_stat_peril1;
+	unsigned int	div_stat_peril2;
+	unsigned int	div_stat_peril3;
+	unsigned int	div_stat_peril4;
+	unsigned int	div_stat_peril5;
+	unsigned int	div_stat_cam1;
+	unsigned char	res37[0x14];
+	unsigned int	div2_stat;
+	unsigned char	res38[0x29c];
+	unsigned int	gate_ip_cam;
+	unsigned int	gate_ip_tv;
+	unsigned int	gate_ip_mfc;
+	unsigned int	gate_ip_g3d;
+	unsigned char	res39[0x4];
+	unsigned int	gate_ip_lcd;
+	unsigned int	gate_ip_isp;
+	unsigned char	res40[0x4];
+	unsigned int	gate_ip_fsys;
+	unsigned char	res41[0x8];
+	unsigned int	gate_ip_gps;
+	unsigned int	gate_ip_peril;
+	unsigned char	res42[0xc];
+	unsigned char	res43[0x4];
+	unsigned char	res44[0xc];
+	unsigned int	gate_block;
+	unsigned char	res45[0x8c];
+	unsigned int	clkout_cmu_top;
+	unsigned int	clkout_cmu_top_div_stat;
+	unsigned char	res46[0x3600];
+	unsigned int	mpll_lock;
+	unsigned char	res47[0xfc];
+	unsigned int	mpll_con0;
+	unsigned int	mpll_con1;
+	unsigned char	res48[0xf0];
+	unsigned int	src_dmc;
+	unsigned char	res49[0xfc];
+	unsigned int	src_mask_dmc;
+	unsigned char	res50[0xfc];
+	unsigned int	mux_stat_dmc;
+	unsigned char	res51[0xfc];
+	unsigned int	div_dmc0;
+	unsigned int	div_dmc1;
+	unsigned char	res52[0xf8];
+	unsigned int	div_stat_dmc0;
+	unsigned int	div_stat_dmc1;
+	unsigned char	res53[0xf8];
+	unsigned int	gate_bus_dmc0;
+	unsigned int	gate_bus_dmc1;
+	unsigned char	res54[0x1f8];
+	unsigned int	gate_ip_dmc0;
+	unsigned int	gate_ip_dmc1;
+	unsigned char	res55[0xf8];
+	unsigned int	clkout_cmu_dmc;
+	unsigned int	clkout_cmu_dmc_div_stat;
+	unsigned char	res56[0x5f8];
+	unsigned int	dcgidx_map0;
+	unsigned int	dcgidx_map1;
+	unsigned int	dcgidx_map2;
+	unsigned char	res57[0x14];
+	unsigned int	dcgperf_map0;
+	unsigned int	dcgperf_map1;
+	unsigned char	res58[0x18];
+	unsigned int	dvcidx_map;
+	unsigned char	res59[0x1c];
+	unsigned int	freq_cpu;
+	unsigned int	freq_dpm;
+	unsigned char	res60[0x18];
+	unsigned int	dvsemclk_en;
+	unsigned int	maxperf;
+	unsigned char	res61[0x8];
+	unsigned int	dmc_freq_ctrl;
+	unsigned int	dmc_pause_ctrl;
+	unsigned int	dddrphy_lock_ctrl;
+	unsigned int	c2c_state;
+	unsigned char	res62[0x2f60];
+	unsigned int	apll_lock;
+	unsigned char	res63[0x8];
+	unsigned char	res64[0xf4];
+	unsigned int	apll_con0;
+	unsigned int	apll_con1;
+	unsigned char	res65[0xf8];
+	unsigned int	src_cpu;
+	unsigned char	res66[0x1fc];
+	unsigned int	mux_stat_cpu;
+	unsigned char	res67[0xfc];
+	unsigned int	div_cpu0;
+	unsigned int	div_cpu1;
+	unsigned char	res68[0xf8];
+	unsigned int	div_stat_cpu0;
+	unsigned int	div_stat_cpu1;
+	unsigned char	res69[0x2f8];
+	unsigned int	clk_gate_ip_cpu;
+	unsigned char	res70[0xfc];
+	unsigned int	clkout_cmu_cpu;
+	unsigned int	clkout_cmu_cpu_div_stat;
+	unsigned char	res71[0x5f8];
+	unsigned int	armclk_stopctrl;
+	unsigned int	atclk_stopctrl;
+	unsigned char	res72[0x10];
+	unsigned char	res73[0x8];
+	unsigned int	pwr_ctrl;
+	unsigned int	pwr_ctrl2;
+	unsigned char	res74[0xd8];
+	unsigned int	apll_con0_l8;
+	unsigned int	apll_con0_l7;
+	unsigned int	apll_con0_l6;
+	unsigned int	apll_con0_l5;
+	unsigned int	apll_con0_l4;
+	unsigned int	apll_con0_l3;
+	unsigned int	apll_con0_l2;
+	unsigned int	apll_con0_l1;
+	unsigned int	iem_control;
+	unsigned char	res75[0xdc];
+	unsigned int	apll_con1_l8;
+	unsigned int	apll_con1_l7;
+	unsigned int	apll_con1_l6;
+	unsigned int	apll_con1_l5;
+	unsigned int	apll_con1_l4;
+	unsigned int	apll_con1_l3;
+	unsigned int	apll_con1_l2;
+	unsigned int	apll_con1_l1;
+	unsigned char	res76[0xe0];
+	unsigned int	div_iem_l8;
+	unsigned int	div_iem_l7;
+	unsigned int	div_iem_l6;
+	unsigned int	div_iem_l5;
+	unsigned int	div_iem_l4;
+	unsigned int	div_iem_l3;
+	unsigned int	div_iem_l2;
+	unsigned int	div_iem_l1;
+	unsigned char	res77[0xe0];
+	unsigned int	l2_status;
+	unsigned char	res78[0xc];
+	unsigned int	cpu_status;
+	unsigned char	res79[0xc];
+	unsigned int	ptm_status;
+	unsigned char	res80[0x2edc];
+	unsigned int	div_isp0;
+	unsigned int	div_isp1;
+	unsigned char	res81[0xf8];
+	unsigned int	div_stat_isp0;
+	unsigned int	div_stat_isp1;
+	unsigned char	res82[0x3f8];
+	unsigned int	gate_ip_isp0;
+	unsigned int	gate_ip_isp1;
+	unsigned char	res83[0x1f8];
+	unsigned int	clkout_cmu_isp;
+	unsigned int	clkout_cmu_ispd_div_stat;
+	unsigned char	res84[0xf8];
+	unsigned int	cmu_isp_spar0;
+	unsigned int	cmu_isp_spar1;
+	unsigned int	cmu_isp_spar2;
+	unsigned int	cmu_isp_spar3;
+};
+
+struct exynos5_clock {
+	unsigned int	apll_lock;
+	unsigned char	res1[0xfc];
+	unsigned int	apll_con0;
+	unsigned int	apll_con1;
+	unsigned char	res2[0xf8];
+	unsigned int	src_cpu;
+	unsigned char	res3[0x1fc];
+	unsigned int	mux_stat_cpu;
+	unsigned char	res4[0xfc];
+	unsigned int	div_cpu0;
+	unsigned int	div_cpu1;
+	unsigned char	res5[0xf8];
+	unsigned int	div_stat_cpu0;
+	unsigned int	div_stat_cpu1;
+	unsigned char	res6[0x1f8];
+	unsigned int	gate_sclk_cpu;
+	unsigned char	res7[0x1fc];
+	unsigned int	clkout_cmu_cpu;
+	unsigned int	clkout_cmu_cpu_div_stat;
+	unsigned char	res8[0x5f8];
+	unsigned int	armclk_stopctrl;
+	unsigned char	res9[0x0c];
+	unsigned int	parityfail_status;
+	unsigned int	parityfail_clear;
+	unsigned char	res10[0x8];
+	unsigned int	pwr_ctrl;
+	unsigned int	pwr_ctr2;
+	unsigned char	res11[0xd8];
+	unsigned int	apll_con0_l8;
+	unsigned int	apll_con0_l7;
+	unsigned int	apll_con0_l6;
+	unsigned int	apll_con0_l5;
+	unsigned int	apll_con0_l4;
+	unsigned int	apll_con0_l3;
+	unsigned int	apll_con0_l2;
+	unsigned int	apll_con0_l1;
+	unsigned int	iem_control;
+	unsigned char	res12[0xdc];
+	unsigned int	apll_con1_l8;
+	unsigned int	apll_con1_l7;
+	unsigned int	apll_con1_l6;
+	unsigned int	apll_con1_l5;
+	unsigned int	apll_con1_l4;
+	unsigned int	apll_con1_l3;
+	unsigned int	apll_con1_l2;
+	unsigned int	apll_con1_l1;
+	unsigned char	res13[0xe0];
+	unsigned int	div_iem_l8;
+	unsigned int	div_iem_l7;
+	unsigned int	div_iem_l6;
+	unsigned int	div_iem_l5;
+	unsigned int	div_iem_l4;
+	unsigned int	div_iem_l3;
+	unsigned int	div_iem_l2;
+	unsigned int	div_iem_l1;
+	unsigned char	res14[0x2ce0];
+	unsigned int	mpll_lock;
+	unsigned char	res15[0xfc];
+	unsigned int	mpll_con0;
+	unsigned int	mpll_con1;
+	unsigned char	res16[0xf8];
+	unsigned int	src_core0;
+	unsigned int	src_core1;
+	unsigned char	res17[0xf8];
+	unsigned int	src_mask_core;
+	unsigned char	res18[0x100];
+	unsigned int	mux_stat_core1;
+	unsigned char	res19[0xf8];
+	unsigned int	div_core0;
+	unsigned int	div_core1;
+	unsigned int	div_sysrgt;
+	unsigned char	res20[0xf4];
+	unsigned int	div_stat_core0;
+	unsigned int	div_stat_core1;
+	unsigned int	div_stat_sysrgt;
+	unsigned char	res21[0x2f4];
+	unsigned int	gate_ip_core;
+	unsigned int	gate_ip_sysrgt;
+	unsigned char	res22[0x8];
+	unsigned int	c2c_monitor;
+	unsigned char	res23[0xec];
+	unsigned int	clkout_cmu_core;
+	unsigned int	clkout_cmu_core_div_stat;
+	unsigned char	res24[0x5f8];
+	unsigned int	dcgidx_map0;
+	unsigned int	dcgidx_map1;
+	unsigned int	dcgidx_map2;
+	unsigned char	res25[0x14];
+	unsigned int	dcgperf_map0;
+	unsigned int	dcgperf_map1;
+	unsigned char	res26[0x18];
+	unsigned int	dvcidx_map;
+	unsigned char	res27[0x1c];
+	unsigned int	freq_cpu;
+	unsigned int	freq_dpm;
+	unsigned char	res28[0x18];
+	unsigned int	dvsemclk_en;
+	unsigned int	maxperf;
+	unsigned char	res29[0xf78];
+	unsigned int	c2c_config;
+	unsigned char	res30[0x24fc];
+	unsigned int	div_acp;
+	unsigned char	res31[0xfc];
+	unsigned int	div_stat_acp;
+	unsigned char	res32[0x1fc];
+	unsigned int	gate_ip_acp;
+	unsigned char	res33[0xfc];
+	unsigned int	div_syslft;
+	unsigned char	res34[0xc];
+	unsigned int	div_stat_syslft;
+	unsigned char	res35[0x1c];
+	unsigned int	gate_ip_syslft;
+	unsigned char	res36[0xcc];
+	unsigned int	clkout_cmu_acp;
+	unsigned int	clkout_cmu_acp_div_stat;
+	unsigned char	res37[0x8];
+	unsigned int	ufmc_config;
+	unsigned char	res38[0x38ec];
+	unsigned int	div_isp0;
+	unsigned int	div_isp1;
+	unsigned int	div_isp2;
+	unsigned char	res39[0xf4];
+	unsigned int	div_stat_isp0;
+	unsigned int	div_stat_isp1;
+	unsigned int	div_stat_isp2;
+	unsigned char	res40[0x3f4];
+	unsigned int	gate_ip_isp0;
+	unsigned int	gate_ip_isp1;
+	unsigned char	res41[0xf8];
+	unsigned int	gate_sclk_isp;
+	unsigned char	res42[0xc];
+	unsigned int	mcuisp_pwr_ctrl;
+	unsigned char	res43[0xec];
+	unsigned int	clkout_cmu_isp;
+	unsigned int	clkout_cmu_isp_div_stat;
+	unsigned char	res44[0x3618];
+	unsigned int	cpll_lock;
+	unsigned char	res45[0xc];
+	unsigned int	epll_lock;
+	unsigned char	res46[0xc];
+	unsigned int	vpll_lock;
+	unsigned char	res47[0xc];
+	unsigned int	gpll_lock;
+	unsigned char	res48[0xcc];
+	unsigned int	cpll_con0;
+	unsigned int	cpll_con1;
+	unsigned char	res49[0x8];
+	unsigned int	epll_con0;
+	unsigned int	epll_con1;
+	unsigned int	epll_con2;
+	unsigned char	res50[0x4];
+	unsigned int	vpll_con0;
+	unsigned int	vpll_con1;
+	unsigned int	vpll_con2;
+	unsigned char	res51[0x4];
+	unsigned int	gpll_con0;
+	unsigned int	gpll_con1;
+	unsigned char	res52[0xb8];
+	unsigned int	src_top0;
+	unsigned int	src_top1;
+	unsigned int	src_top2;
+	unsigned int	src_top3;
+	unsigned int	src_gscl;
+	unsigned char	res53[0x8];
+	unsigned int	src_disp1_0;
+	unsigned char	res54[0x10];
+	unsigned int	src_mau;
+	unsigned int	src_fsys;
+	unsigned int	src_gen;
+	unsigned char	res55[0x4];
+	unsigned int	src_peric0;
+	unsigned int	src_peric1;
+	unsigned char	res56[0x18];
+	unsigned int	sclk_src_isp;
+	unsigned char	res57[0x9c];
+	unsigned int	src_mask_top;
+	unsigned char	res58[0xc];
+	unsigned int	src_mask_gscl;
+	unsigned char	res59[0x8];
+	unsigned int	src_mask_disp1_0;
+	unsigned char	res60[0x4];
+	unsigned int	src_mask_mau;
+	unsigned char	res61[0x8];
+	unsigned int	src_mask_fsys;
+	unsigned int	src_mask_gen;
+	unsigned char	res62[0x8];
+	unsigned int	src_mask_peric0;
+	unsigned int	src_mask_peric1;
+	unsigned char	res63[0x18];
+	unsigned int	src_mask_isp;
+	unsigned char	res67[0x9c];
+	unsigned int	mux_stat_top0;
+	unsigned int	mux_stat_top1;
+	unsigned int	mux_stat_top2;
+	unsigned int	mux_stat_top3;
+	unsigned char	res68[0xf0];
+	unsigned int	div_top0;
+	unsigned int	div_top1;
+	unsigned char	res69[0x8];
+	unsigned int	div_gscl;
+	unsigned char	res70[0x8];
+	unsigned int	div_disp1_0;
+	unsigned char	res71[0xc];
+	unsigned int	div_gen;
+	unsigned char	res72[0x4];
+	unsigned int	div_mau;
+	unsigned int	div_fsys0;
+	unsigned int	div_fsys1;
+	unsigned int	div_fsys2;
+	unsigned char	res73[0x4];
+	unsigned int	div_peric0;
+	unsigned int	div_peric1;
+	unsigned int	div_peric2;
+	unsigned int	div_peric3;
+	unsigned int	div_peric4;
+	unsigned int	div_peric5;
+	unsigned char	res74[0x10];
+	unsigned int	sclk_div_isp;
+	unsigned char	res75[0xc];
+	unsigned int	div2_ratio0;
+	unsigned int	div2_ratio1;
+	unsigned char	res76[0x8];
+	unsigned int	div4_ratio;
+	unsigned char	res77[0x6c];
+	unsigned int	div_stat_top0;
+	unsigned int	div_stat_top1;
+	unsigned char	res78[0x8];
+	unsigned int	div_stat_gscl;
+	unsigned char	res79[0x8];
+	unsigned int	div_stat_disp1_0;
+	unsigned char	res80[0xc];
+	unsigned int	div_stat_gen;
+	unsigned char	res81[0x4];
+	unsigned int	div_stat_mau;
+	unsigned int	div_stat_fsys0;
+	unsigned int	div_stat_fsys1;
+	unsigned int	div_stat_fsys2;
+	unsigned char	res82[0x4];
+	unsigned int	div_stat_peric0;
+	unsigned int	div_stat_peric1;
+	unsigned int	div_stat_peric2;
+	unsigned int	div_stat_peric3;
+	unsigned int	div_stat_peric4;
+	unsigned int	div_stat_peric5;
+	unsigned char	res83[0x10];
+	unsigned int	sclk_div_stat_isp;
+	unsigned char	res84[0xc];
+	unsigned int	div2_stat0;
+	unsigned int	div2_stat1;
+	unsigned char	res85[0x8];
+	unsigned int	div4_stat;
+	unsigned char	res86[0x184];
+	unsigned int	gate_top_sclk_disp1;
+	unsigned int	gate_top_sclk_gen;
+	unsigned char	res87[0xc];
+	unsigned int	gate_top_sclk_mau;
+	unsigned int	gate_top_sclk_fsys;
+	unsigned char	res88[0xc];
+	unsigned int	gate_top_sclk_peric;
+	unsigned char	res89[0x1c];
+	unsigned int	gate_top_sclk_isp;
+	unsigned char	res90[0xac];
+	unsigned int	gate_ip_gscl;
+	unsigned char	res91[0x4];
+	unsigned int	gate_ip_disp1;
+	unsigned int	gate_ip_mfc;
+	unsigned int	gate_ip_g3d;
+	unsigned int	gate_ip_gen;
+	unsigned char	res92[0xc];
+	unsigned int	gate_ip_fsys;
+	unsigned char	res93[0x8];
+	unsigned int	gate_ip_peric;
+	unsigned char	res94[0xc];
+	unsigned int	gate_ip_peris;
+	unsigned char	res95[0x1c];
+	unsigned int	gate_block;
+	unsigned char	res96[0x1c];
+	unsigned int	mcuiop_pwr_ctrl;
+	unsigned char	res97[0x5c];
+	unsigned int	clkout_cmu_top;
+	unsigned int	clkout_cmu_top_div_stat;
+	unsigned char	res98[0x37f8];
+	unsigned int	src_lex;
+	unsigned char	res99[0x1fc];
+	unsigned int	mux_stat_lex;
+	unsigned char	res100[0xfc];
+	unsigned int	div_lex;
+	unsigned char	res101[0xfc];
+	unsigned int	div_stat_lex;
+	unsigned char	res102[0x1fc];
+	unsigned int	gate_ip_lex;
+	unsigned char	res103[0x1fc];
+	unsigned int	clkout_cmu_lex;
+	unsigned int	clkout_cmu_lex_div_stat;
+	unsigned char	res104[0x3af8];
+	unsigned int	div_r0x;
+	unsigned char	res105[0xfc];
+	unsigned int	div_stat_r0x;
+	unsigned char	res106[0x1fc];
+	unsigned int	gate_ip_r0x;
+	unsigned char	res107[0x1fc];
+	unsigned int	clkout_cmu_r0x;
+	unsigned int	clkout_cmu_r0x_div_stat;
+	unsigned char	res108[0x3af8];
+	unsigned int	div_r1x;
+	unsigned char	res109[0xfc];
+	unsigned int	div_stat_r1x;
+	unsigned char	res110[0x1fc];
+	unsigned int	gate_ip_r1x;
+	unsigned char	res111[0x1fc];
+	unsigned int	clkout_cmu_r1x;
+	unsigned int	clkout_cmu_r1x_div_stat;
+	unsigned char	res112[0x3608];
+	unsigned int	bpll_lock;
+	unsigned char	res113[0xfc];
+	unsigned int	bpll_con0;
+	unsigned int	bpll_con1;
+	unsigned char	res114[0xe8];
+	unsigned int	src_cdrex;
+	unsigned char	res115[0x1fc];
+	unsigned int	mux_stat_cdrex;
+	unsigned char	res116[0xfc];
+	unsigned int	div_cdrex;
+	unsigned char	res117[0xfc];
+	unsigned int	div_stat_cdrex;
+	unsigned char	res118[0x2fc];
+	unsigned int	gate_ip_cdrex;
+	unsigned char	res119[0x10];
+	unsigned int	dmc_freq_ctrl;
+	unsigned char	res120[0x4];
+	unsigned int	drex2_pause;
+	unsigned char	res121[0xe0];
+	unsigned int	clkout_cmu_cdrex;
+	unsigned int	clkout_cmu_cdrex_div_stat;
+	unsigned char	res122[0x8];
+	unsigned int	lpddr3phy_ctrl;
+	unsigned int	lpddr3phy_con0;
+	unsigned int	lpddr3phy_con1;
+	unsigned int	lpddr3phy_con2;
+	unsigned int	lpddr3phy_con3;
+	unsigned int	pll_div2_sel;
+	unsigned char	res123[0xf5d8];
+};
+
+struct exynos5420_clock {
+	unsigned int	apll_lock;			/* 0x10010000 */
+	unsigned char	res1[0xfc];
+	unsigned int	apll_con0;
+	unsigned int	apll_con1;
+	unsigned char	res2[0xf8];
+	unsigned int	src_cpu;
+	unsigned char	res3[0x1fc];
+	unsigned int	mux_stat_cpu;
+	unsigned char	res4[0xfc];
+	unsigned int	div_cpu0;		/* 0x10010500 */
+	unsigned int	div_cpu1;
+	unsigned char	res5[0xf8];
+	unsigned int	div_stat_cpu0;
+	unsigned int	div_stat_cpu1;
+	unsigned char	res6[0xf8];
+	unsigned int	gate_bus_cpu;
+	unsigned char	res7[0xfc];
+	unsigned int	gate_sclk_cpu;
+	unsigned char	res8[0x1fc];
+	unsigned int	clkout_cmu_cpu;		/* 0x10010a00 */
+	unsigned int	clkout_cmu_cpu_div_stat;
+	unsigned char	res9[0x5f8];
+	unsigned int	armclk_stopctrl;
+	unsigned char	res10[0x4];
+	unsigned int	arm_ema_ctrl;
+	unsigned int	arm_ema_status;
+	unsigned char	res11[0x10];
+	unsigned int	pwr_ctrl;
+	unsigned int	pwr_ctrl2;
+	unsigned char	res12[0xd8];
+	unsigned int	apll_con0_l8;		/* 0x1001100 */
+	unsigned int	apll_con0_l7;
+	unsigned int	apll_con0_l6;
+	unsigned int	apll_con0_l5;
+	unsigned int	apll_con0_l4;
+	unsigned int	apll_con0_l3;
+	unsigned int	apll_con0_l2;
+	unsigned int	apll_con0_l1;
+	unsigned int	iem_control;
+	unsigned char	res13[0xdc];
+	unsigned int	apll_con1_l8;		/* 0x10011200 */
+	unsigned int	apll_con1_l7;
+	unsigned int	apll_con1_l6;
+	unsigned int	apll_con1_l5;
+	unsigned int	apll_con1_l4;
+	unsigned int	apll_con1_l3;
+	unsigned int	apll_con1_l2;
+	unsigned int	apll_con1_l1;
+	unsigned char	res14[0xe0];
+	unsigned int	clkdiv_iem_l8;
+	unsigned int	clkdiv_iem_l7;		/* 0x10011304 */
+	unsigned int	clkdiv_iem_l6;
+	unsigned int	clkdiv_iem_l5;
+	unsigned int	clkdiv_iem_l4;
+	unsigned int	clkdiv_iem_l3;
+	unsigned int	clkdiv_iem_l2;
+	unsigned int	clkdiv_iem_l1;
+	unsigned char	res15[0xe0];
+	unsigned int	l2_status;
+	unsigned char	res16[0x0c];
+	unsigned int	cpu_status;		/* 0x10011410 */
+	unsigned char	res17[0x0c];
+	unsigned int	ptm_status;
+	unsigned char	res18[0xbdc];
+	unsigned int	cmu_cpu_spare0;
+	unsigned int	cmu_cpu_spare1;
+	unsigned int	cmu_cpu_spare2;
+	unsigned int	cmu_cpu_spare3;
+	unsigned int	cmu_cpu_spare4;
+	unsigned char	res19[0x1fdc];
+	unsigned int	cmu_cpu_version;
+	unsigned char	res20[0x20c];
+	unsigned int	src_cperi0;		/* 0x10014200 */
+	unsigned int	src_cperi1;
+	unsigned char	res21[0xf8];
+	unsigned int	src_mask_cperi;
+	unsigned char	res22[0x100];
+	unsigned int	mux_stat_cperi1;
+	unsigned char	res23[0xfc];
+	unsigned int	div_cperi1;
+	unsigned char	res24[0xfc];
+	unsigned int	div_stat_cperi1;
+	unsigned char	res25[0xf8];
+	unsigned int	gate_bus_cperi0;	/* 0x10014700 */
+	unsigned int	gate_bus_cperi1;
+	unsigned char	res26[0xf8];
+	unsigned int	gate_sclk_cperi;
+	unsigned char	res27[0xfc];
+	unsigned int	gate_ip_cperi;
+	unsigned char	res28[0xfc];
+	unsigned int	clkout_cmu_cperi;
+	unsigned int	clkout_cmu_cperi_div_stat;
+	unsigned char	res29[0x5f8];
+	unsigned int	dcgidx_map0;		/* 0x10015000 */
+	unsigned int	dcgidx_map1;
+	unsigned int	dcgidx_map2;
+	unsigned char	res30[0x14];
+	unsigned int	dcgperf_map0;
+	unsigned int	dcgperf_map1;
+	unsigned char	res31[0x18];
+	unsigned int	dvcidx_map;
+	unsigned char	res32[0x1c];
+	unsigned int	freq_cpu;
+	unsigned int	freq_dpm;
+	unsigned char	res33[0x18];
+	unsigned int	dvsemclk_en;		/* 0x10015080 */
+	unsigned int	maxperf;
+	unsigned char	res34[0x2e78];
+	unsigned int	cmu_cperi_spare0;
+	unsigned int	cmu_cperi_spare1;
+	unsigned int	cmu_cperi_spare2;
+	unsigned int	cmu_cperi_spare3;
+	unsigned int	cmu_cperi_spare4;
+	unsigned int	cmu_cperi_spare5;
+	unsigned int	cmu_cperi_spare6;
+	unsigned int	cmu_cperi_spare7;
+	unsigned int	cmu_cperi_spare8;
+	unsigned char	res35[0xcc];
+	unsigned int	cmu_cperi_version;		/* 0x10017ff0 */
+	unsigned char	res36[0x50c];
+	unsigned int	div_g2d;
+	unsigned char	res37[0xfc];
+	unsigned int	div_stat_g2d;
+	unsigned char	res38[0xfc];
+	unsigned int	gate_bus_g2d;
+	unsigned char	res39[0xfc];
+	unsigned int	gate_ip_g2d;
+	unsigned char	res40[0x1fc];
+	unsigned int	clkout_cmu_g2d;
+	unsigned int	clkout_cmu_g2d_div_stat;	/* 0x10018a04 */
+	unsigned char	res41[0xf8];
+	unsigned int	cmu_g2d_spare0;
+	unsigned int	cmu_g2d_spare1;
+	unsigned int	cmu_g2d_spare2;
+	unsigned int	cmu_g2d_spare3;
+	unsigned int	cmu_g2d_spare4;
+	unsigned char	res42[0x34dc];
+	unsigned int	cmu_g2d_version;
+	unsigned char	res43[0x30c];
+	unsigned int	div_cmu_isp0;
+	unsigned int	div_cmu_isp1;
+	unsigned int	div_isp2;		/* 0x1001c308 */
+	unsigned char	res44[0xf4];
+	unsigned int	div_stat_cmu_isp0;
+	unsigned int	div_stat_cmu_isp1;
+	unsigned int	div_stat_isp2;
+	unsigned char	res45[0x2f4];
+	unsigned int	gate_bus_isp0;
+	unsigned int	gate_bus_isp1;
+	unsigned int	gate_bus_isp2;
+	unsigned int	gate_bus_isp3;
+	unsigned char	res46[0xf0];
+	unsigned int	gate_ip_isp0;
+	unsigned int	gate_ip_isp1;
+	unsigned char	res47[0xf8];
+	unsigned int	gate_sclk_isp;
+	unsigned char	res48[0x0c];
+	unsigned int	mcuisp_pwr_ctrl;		/* 0x1001c910 */
+	unsigned char	res49[0x0ec];
+	unsigned int	clkout_cmu_isp;
+	unsigned int	clkout_cmu_isp_div_stat;
+	unsigned char	res50[0xf8];
+	unsigned int	cmu_isp_spare0;
+	unsigned int	cmu_isp_spare1;
+	unsigned int	cmu_isp_spare2;
+	unsigned int	cmu_isp_spare3;
+	unsigned char	res51[0x34e0];
+	unsigned int	cmu_isp_version;
+	unsigned char	res52[0x2c];
+	unsigned int	cpll_lock;			/* 10020020 */
+	unsigned char	res53[0xc];
+	unsigned int	dpll_lock;
+	unsigned char	res54[0xc];
+	unsigned int	epll_lock;
+	unsigned char	res55[0xc];
+	unsigned int	rpll_lock;
+	unsigned char	res56[0xc];
+	unsigned int	ipll_lock;
+	unsigned char	res57[0xc];
+	unsigned int	spll_lock;
+	unsigned char	res58[0xc];
+	unsigned int	vpll_lock;
+	unsigned char	res59[0xc];
+	unsigned int	mpll_lock;
+	unsigned char	res60[0x8c];
+	unsigned int	cpll_con0;			/* 10020120 */
+	unsigned int	cpll_con1;
+	unsigned int	dpll_con0;
+	unsigned int	dpll_con1;
+	unsigned int	epll_con0;
+	unsigned int	epll_con1;
+	unsigned int	epll_con2;
+	unsigned char	res601[0x4];
+	unsigned int	rpll_con0;
+	unsigned int	rpll_con1;
+	unsigned int	rpll_con2;
+	unsigned char	res602[0x4];
+	unsigned int	ipll_con0;
+	unsigned int	ipll_con1;
+	unsigned char	res61[0x8];
+	unsigned int	spll_con0;
+	unsigned int	spll_con1;
+	unsigned char	res62[0x8];
+	unsigned int	vpll_con0;
+	unsigned int	vpll_con1;
+	unsigned char	res63[0x8];
+	unsigned int	mpll_con0;
+	unsigned int	mpll_con1;
+	unsigned char	res64[0x78];
+	unsigned int	src_top0;		/* 0x10020200 */
+	unsigned int	src_top1;
+	unsigned int	src_top2;
+	unsigned int	src_top3;
+	unsigned int	src_top4;
+	unsigned int	src_top5;
+	unsigned int	src_top6;
+	unsigned int	src_top7;
+	unsigned char	res65[0xc];
+	unsigned int	src_disp10;		/* 0x1002022c */
+	unsigned char	res66[0x10];
+	unsigned int	src_mau;
+	unsigned int	src_fsys;
+	unsigned char	res67[0x8];
+	unsigned int	src_peric0;
+	unsigned int	src_peric1;
+	unsigned char	res68[0x18];
+	unsigned int	src_isp;
+	unsigned char	res69[0x0c];
+	unsigned int	src_top10;
+	unsigned int	src_top11;
+	unsigned int	src_top12;
+	unsigned char	res70[0x74];
+	unsigned int	src_mask_top0;
+	unsigned int	src_mask_top1;
+	unsigned int	src_mask_top2;
+	unsigned char	res71[0x10];
+	unsigned int	src_mask_top7;
+	unsigned char	res72[0xc];
+	unsigned int	src_mask_disp10;	/* 0x1002032c */
+	unsigned char	res73[0x4];
+	unsigned int	src_mask_mau;
+	unsigned char	res74[0x8];
+	unsigned int	src_mask_fsys;
+	unsigned char	res75[0xc];
+	unsigned int	src_mask_peric0;
+	unsigned int	src_mask_peric1;
+	unsigned char	res76[0x18];
+	unsigned int	src_mask_isp;
+	unsigned char	res77[0x8c];
+	unsigned int	mux_stat_top0;		/* 0x10020400 */
+	unsigned int	mux_stat_top1;
+	unsigned int	mux_stat_top2;
+	unsigned int	mux_stat_top3;
+	unsigned int	mux_stat_top4;
+	unsigned int	mux_stat_top5;
+	unsigned int	mux_stat_top6;
+	unsigned int	mux_stat_top7;
+	unsigned char	res78[0x60];
+	unsigned int	mux_stat_top10;
+	unsigned int	mux_stat_top11;
+	unsigned int	mux_stat_top12;
+	unsigned char	res79[0x74];
+	unsigned int	div_top0;		/* 0x10020500 */
+	unsigned int	div_top1;
+	unsigned int	div_top2;
+	unsigned char	res80[0x20];
+	unsigned int	div_disp10;
+	unsigned char	res81[0x14];
+	unsigned int	div_mau;
+	unsigned int	div_fsys0;
+	unsigned int	div_fsys1;
+	unsigned int	div_fsys2;
+	unsigned char	res82[0x4];
+	unsigned int	div_peric0;
+	unsigned int	div_peric1;
+	unsigned int	div_peric2;
+	unsigned int	div_peric3;
+	unsigned int	div_peric4;		/* 0x10020568 */
+	unsigned char	res83[0x14];
+	unsigned int	div_isp0;
+	unsigned int	div_isp1;
+	unsigned char	res84[0x8];
+	unsigned int	clkdiv2_ratio;
+	unsigned char	res850[0xc];
+	unsigned int	clkdiv4_ratio;
+	unsigned char	res85[0x5c];
+	unsigned int	div_stat_top0;
+	unsigned int	div_stat_top1;
+	unsigned int	div_stat_top2;
+	unsigned char	res86[0x20];
+	unsigned int	div_stat_disp10;
+	unsigned char	res87[0x14];
+	unsigned int	div_stat_mau;		/* 0x10020644 */
+	unsigned int	div_stat_fsys0;
+	unsigned int	div_stat_fsys1;
+	unsigned int	div_stat_fsys2;
+	unsigned char	res88[0x4];
+	unsigned int	div_stat_peric0;
+	unsigned int	div_stat_peric1;
+	unsigned int	div_stat_peric2;
+	unsigned int	div_stat_peric3;
+	unsigned int	div_stat_peric4;
+	unsigned char	res89[0x14];
+	unsigned int	div_stat_isp0;
+	unsigned int	div_stat_isp1;
+	unsigned char	res90[0x8];
+	unsigned int	clkdiv2_stat0;
+	unsigned char	res91[0xc];
+	unsigned int	clkdiv4_stat;
+	unsigned char	res92[0x5c];
+	unsigned int	gate_bus_top;		/* 0x10020700 */
+	unsigned char	res93[0xc];
+	unsigned int	gate_bus_gscl0;
+	unsigned char	res94[0xc];
+	unsigned int	gate_bus_gscl1;
+	unsigned char	res95[0x4];
+	unsigned int	gate_bus_disp1;
+	unsigned char	res96[0x4];
+	unsigned int	gate_bus_wcore;
+	unsigned int	gate_bus_mfc;
+	unsigned int	gate_bus_g3d;
+	unsigned int	gate_bus_gen;
+	unsigned int	gate_bus_fsys0;
+	unsigned int	gate_bus_fsys1;
+	unsigned int	gate_bus_fsys2;
+	unsigned int	gate_bus_mscl;
+	unsigned int	gate_bus_peric;
+	unsigned int	gate_bus_peric1;
+	unsigned char	res97[0x8];
+	unsigned int	gate_bus_peris0;
+	unsigned int	gate_bus_peris1;	/* 0x10020764 */
+	unsigned char	res98[0x8];
+	unsigned int	gate_bus_noc;
+	unsigned char	res99[0xac];
+	unsigned int	gate_top_sclk_gscl;
+	unsigned char	res1000[0x4];
+	unsigned int	gate_top_sclk_disp1;
+	unsigned char	res100[0x10];
+	unsigned int	gate_top_sclk_mau;
+	unsigned int	gate_top_sclk_fsys;
+	unsigned char	res101[0xc];
+	unsigned int	gate_top_sclk_peric;
+	unsigned char	res102[0xc];
+	unsigned int	gate_top_sclk_cperi;
+	unsigned char	res103[0xc];
+	unsigned int	gate_top_sclk_isp;
+	unsigned char	res104[0x9c];
+	unsigned int	gate_ip_gscl0;
+	unsigned char	res105[0xc];
+	unsigned int	gate_ip_gscl1;
+	unsigned char	res106[0x4];
+	unsigned int	gate_ip_disp1;
+	unsigned int	gate_ip_mfc;
+	unsigned int	gate_ip_g3d;
+	unsigned int	gate_ip_gen;		/* 0x10020934 */
+	unsigned char	res107[0xc];
+	unsigned int	gate_ip_fsys;
+	unsigned char	res108[0x8];
+	unsigned int	gate_ip_peric;
+	unsigned char	res109[0xc];
+	unsigned int	gate_ip_peris;
+	unsigned char	res110[0xc];
+	unsigned int	gate_ip_mscl;
+	unsigned char	res111[0xc];
+	unsigned int	gate_ip_block;
+	unsigned char	res112[0xc];
+	unsigned int	bypass;
+	unsigned char	res113[0x6c];
+	unsigned int	clkout_cmu_top;
+	unsigned int	clkout_cmu_top_div_stat;
+	unsigned char	res114[0xf8];
+	unsigned int	clkout_top_spare0;
+	unsigned int	clkout_top_spare1;
+	unsigned int	clkout_top_spare2;
+	unsigned int	clkout_top_spare3;
+	unsigned char	res115[0x34e0];
+	unsigned int	clkout_top_version;
+	unsigned char	res116[0xc01c];
+	unsigned int	bpll_lock;			/* 0x10030010 */
+	unsigned char	res117[0xfc];
+	unsigned int	bpll_con0;
+	unsigned int	bpll_con1;
+	unsigned char	res118[0xe8];
+	unsigned int	src_cdrex;
+	unsigned char	res119[0x1fc];
+	unsigned int	mux_stat_cdrex;
+	unsigned char	res120[0xfc];
+	unsigned int	div_cdrex0;
+	unsigned int	div_cdrex1;
+	unsigned char	res121[0xf8];
+	unsigned int	div_stat_cdrex;
+	unsigned char	res1211[0xfc];
+	unsigned int	gate_bus_cdrex;
+	unsigned int	gate_bus_cdrex1;
+	unsigned char	res122[0x1f8];
+	unsigned int	gate_ip_cdrex;
+	unsigned char	res123[0x10];
+	unsigned int	dmc_freq_ctrl;		/* 0x10030914 */
+	unsigned char	res124[0x4];
+	unsigned int	pause;
+	unsigned int	ddrphy_lock_ctrl;
+	unsigned char	res125[0xdc];
+	unsigned int	clkout_cmu_cdrex;
+	unsigned int	clkout_cmu_cdrex_div_stat;
+	unsigned char	res126[0x8];
+	unsigned int	lpddr3phy_ctrl;
+	unsigned int	lpddr3phy_con0;
+	unsigned int	lpddr3phy_con1;
+	unsigned int	lpddr3phy_con2;
+	unsigned int	lpddr3phy_con3;
+	unsigned int	lpddr3phy_con4;
+	unsigned int	lpddr3phy_con5;		/* 0x10030a28 */
+	unsigned int	pll_div2_sel;
+	unsigned char	res127[0xd0];
+	unsigned int	cmu_cdrex_spare0;
+	unsigned int	cmu_cdrex_spare1;
+	unsigned int	cmu_cdrex_spare2;
+	unsigned int	cmu_cdrex_spare3;
+	unsigned int	cmu_cdrex_spare4;
+	unsigned char	res128[0x34dc];
+	unsigned int	cmu_cdrex_version;		/* 0x10033ff0 */
+	unsigned char	res129[0x400c];
+	unsigned int	kpll_lock;
+	unsigned char	res130[0xfc];
+	unsigned int	kpll_con0;
+	unsigned int	kpll_con1;
+	unsigned char	res131[0xf8];
+	unsigned int	src_kfc;
+	unsigned char	res132[0x1fc];
+	unsigned int	mux_stat_kfc;		/* 0x10038400 */
+	unsigned char	res133[0xfc];
+	unsigned int	div_kfc0;
+	unsigned char	res134[0xfc];
+	unsigned int	div_stat_kfc0;
+	unsigned char	res135[0xfc];
+	unsigned int	gate_bus_cpu_kfc;
+	unsigned char	res136[0xfc];
+	unsigned int	gate_sclk_cpu_kfc;
+	unsigned char	res137[0x1fc];
+	unsigned int	clkout_cmu_kfc;
+	unsigned int	clkout_cmu_kfc_div_stat;	/* 0x10038a04 */
+	unsigned char	res138[0x5f8];
+	unsigned int	armclk_stopctrl_kfc;
+	unsigned char	res139[0x4];
+	unsigned int	armclk_ema_ctrl_kfc;
+	unsigned int	armclk_ema_status_kfc;
+	unsigned char	res140[0x10];
+	unsigned int	pwr_ctrl_kfc;
+	unsigned int	pwr_ctrl2_kfc;
+	unsigned char	res141[0xd8];
+	unsigned int	kpll_con0_l8;
+	unsigned int	kpll_con0_l7;
+	unsigned int	kpll_con0_l6;
+	unsigned int	kpll_con0_l5;
+	unsigned int	kpll_con0_l4;
+	unsigned int	kpll_con0_l3;
+	unsigned int	kpll_con0_l2;
+	unsigned int	kpll_con0_l1;
+	unsigned int	iem_control_kfc;		/* 0x10039120 */
+	unsigned char	res142[0xdc];
+	unsigned int	kpll_con1_l8;
+	unsigned int	kpll_con1_l7;
+	unsigned int	kpll_con1_l6;
+	unsigned int	kpll_con1_l5;
+	unsigned int	kpll_con1_l4;
+	unsigned int	kpll_con1_l3;
+	unsigned int	kpll_con1_l2;
+	unsigned int	kpll_con1_l1;
+	unsigned char	res143[0xe0];
+	unsigned int	clkdiv_iem_l8_kfc;		/* 0x10039300 */
+	unsigned int	clkdiv_iem_l7_kfc;
+	unsigned int	clkdiv_iem_l6_kfc;
+	unsigned int	clkdiv_iem_l5_kfc;
+	unsigned int	clkdiv_iem_l4_kfc;
+	unsigned int	clkdiv_iem_l3_kfc;
+	unsigned int	clkdiv_iem_l2_kfc;
+	unsigned int	clkdiv_iem_l1_kfc;
+	unsigned char	res144[0xe0];
+	unsigned int	l2_status_kfc;
+	unsigned char	res145[0xc];
+	unsigned int	cpu_status_kfc;		/* 0x10039410 */
+	unsigned char	res146[0xc];
+	unsigned int	ptm_status_kfc;
+	unsigned char	res147[0xbdc];
+	unsigned int	cmu_kfc_spare0;
+	unsigned int	cmu_kfc_spare1;
+	unsigned int	cmu_kfc_spare2;
+	unsigned int	cmu_kfc_spare3;
+	unsigned int	cmu_kfc_spare4;
+	unsigned char	res148[0x1fdc];
+	unsigned int	cmu_kfc_version;		/* 0x1003bff0 */
+};
+
+/* structure for epll configuration used in audio clock configuration */
+struct set_epll_con_val {
+	unsigned int freq_out;		/* frequency out */
+	unsigned int en_lock_det;	/* enable lock detect */
+	unsigned int m_div;		/* m divider value */
+	unsigned int p_div;		/* p divider value */
+	unsigned int s_div;		/* s divider value */
+	unsigned int k_dsm;		/* k value of delta signal modulator */
+};
+#endif
+
+#define MPLL_FOUT_SEL_SHIFT	4
+#define EXYNOS5_EPLLCON0_LOCKED_SHIFT	29  /* EPLL Locked bit position*/
+#define TIMEOUT_EPLL_LOCK		1000
+
+#define AUDIO_0_RATIO_MASK		0x0f
+#define AUDIO_1_RATIO_MASK		0x0f
+
+#define AUDIO0_SEL_MASK			0xf
+#define EXYNOS5420_AUDIO0_SEL_MASK	(0x3 << 28)
+#define AUDIO1_SEL_MASK			0xf
+
+#define CLK_SRC_SCLK_EPLL		0x7
+#define EXYNOS5420_CLK_SRC_SCLK_EPLL	(0x6 << 28)
+#define CLK_SRC_MOUT_EPLL		(1<<12)
+#define EXYNOS5420_CLK_SRC_MOUT_EPLL	BIT(20)
+#define AUDIO_CLKMUX_ASS		(1<<0)
+
+/* CON0 bit-fields */
+#define EPLL_CON0_MDIV_MASK		0x1ff
+#define EPLL_CON0_PDIV_MASK		0x3f
+#define EPLL_CON0_SDIV_MASK		0x7
+#define EPLL_CON0_MDIV_SHIFT		16
+#define EPLL_CON0_PDIV_SHIFT		8
+#define EPLL_CON0_SDIV_SHIFT		0
+#define EPLL_CON0_LOCK_DET_EN_SHIFT	28
+#define EPLL_CON0_LOCK_DET_EN_MASK	1
+
+#define MPLL_FOUT_SEL_MASK	0x1
+#define BPLL_FOUT_SEL_SHIFT	0
+#define BPLL_FOUT_SEL_MASK	0x1
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/cpu.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/cpu.h
new file mode 100644
index 000000000..fb5fdaf3b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/cpu.h
@@ -0,0 +1,324 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef _EXYNOS4_CPU_H
+#define _EXYNOS4_CPU_H
+
+#define DEVICE_NOT_AVAILABLE		0
+
+#define EXYNOS_CPU_NAME			"Exynos"
+#define EXYNOS4_ADDR_BASE		0x10000000
+
+/* EXYNOS4 Common*/
+#define EXYNOS4_I2C_SPACING		0x10000
+
+#define EXYNOS4_GPIO_PART3_BASE		0x03860000
+#define EXYNOS4_PRO_ID			0x10000000
+#define EXYNOS4_OP_MODE			0x10000008
+#define EXYNOS4_SYSREG_BASE		0x10010000
+#define EXYNOS4_POWER_BASE		0x10020000
+#define EXYNOS4_SWRESET			0x10020400
+#define EXYNOS4_CLOCK_BASE		0x10030000
+#define EXYNOS4_SYSTIMER_BASE		0x10050000
+#define EXYNOS4_WATCHDOG_BASE		0x10060000
+#define EXYNOS4_TZPC_BASE		0x10110000
+#define EXYNOS4_DMC_CTRL_BASE		0x10400000
+#define EXYNOS4_MIU_BASE		0x10600000
+#define EXYNOS4_ACE_SFR_BASE		0x10830000
+#define EXYNOS4_GPIO_PART2_BASE		0x11000000
+#define EXYNOS4_GPIO_PART2_0		0x11000000 /* GPJ0 */
+#define EXYNOS4_GPIO_PART2_1		0x11000c00 /* GPX0 */
+#define EXYNOS4_GPIO_PART1_BASE		0x11400000
+#define EXYNOS4_FIMD_BASE		0x11C00000
+#define EXYNOS4_MIPI_DSIM_BASE		0x11C80000
+#define EXYNOS4_USBOTG_BASE		0x12480000
+#define EXYNOS4_MMC_BASE		0x12510000
+#define EXYNOS4_SROMC_BASE		0x12570000
+#define EXYNOS4_USB_HOST_EHCI_BASE	0x12580000
+#define EXYNOS4_USBPHY_BASE		0x125B0000
+#define EXYNOS4_UART_BASE		0x13800000
+#define EXYNOS4_I2C_BASE		0x13860000
+#define EXYNOS4_ADC_BASE		0x13910000
+#define EXYNOS4_SPI_BASE		0x13920000
+#define EXYNOS4_PWMTIMER_BASE		0x139D0000
+#define EXYNOS4_MODEM_BASE		0x13A00000
+#define EXYNOS4_USBPHY_CONTROL		0x10020704
+#define EXYNOS4_I2S_BASE		0xE2100000
+
+#define EXYNOS4_GPIO_PART4_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4_DP_BASE			DEVICE_NOT_AVAILABLE
+#define EXYNOS4_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4_AUDIOSS_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
+#define EXYNOS4_USB3PHY_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4_DMC_TZASC_BASE		DEVICE_NOT_AVAILABLE
+
+/* EXYNOS4X12 */
+#define EXYNOS4X12_GPIO_PART3_BASE	0x03860000
+#define EXYNOS4X12_PRO_ID		0x10000000
+#define EXYNOS4X12_SYSREG_BASE		0x10010000
+#define EXYNOS4X12_POWER_BASE		0x10020000
+#define EXYNOS4X12_SWRESET		0x10020400
+#define EXYNOS4X12_USBPHY_CONTROL	0x10020704
+#define EXYNOS4X12_CLOCK_BASE		0x10030000
+#define EXYNOS4X12_SYSTIMER_BASE	0x10050000
+#define EXYNOS4X12_WATCHDOG_BASE	0x10060000
+#define EXYNOS4X12_TZPC_BASE		0x10110000
+#define EXYNOS4X12_DMC_CTRL_BASE	0x10600000
+#define EXYNOS4X12_GPIO_PART4_BASE	0x106E0000
+#define EXYNOS4X12_ACE_SFR_BASE		0x10830000
+#define EXYNOS4X12_GPIO_PART2_BASE	0x11000000
+#define EXYNOS4X12_GPIO_PART2_0		0x11000000
+#define EXYNOS4X12_GPIO_PART2_1		0x11000040 /* GPK0 */
+#define EXYNOS4X12_GPIO_PART2_2		0x11000260 /* GPM0 */
+#define EXYNOS4X12_GPIO_PART2_3		0x11000c00 /* GPX0 */
+#define EXYNOS4X12_GPIO_PART1_BASE	0x11400000
+#define EXYNOS4X12_GPIO_PART1_0		0x11400000 /* GPA0 */
+#define EXYNOS4X12_GPIO_PART1_1		0x11400180 /* GPF0 */
+#define EXYNOS4X12_GPIO_PART1_2		0x11400240 /* GPJ0 */
+#define EXYNOS4X12_FIMD_BASE		0x11C00000
+#define EXYNOS4X12_MIPI_DSIM_BASE	0x11C80000
+#define EXYNOS4X12_USBOTG_BASE		0x12480000
+#define EXYNOS4X12_MMC_BASE		0x12510000
+#define EXYNOS4X12_SROMC_BASE		0x12570000
+#define EXYNOS4X12_USB_HOST_EHCI_BASE	0x12580000
+#define EXYNOS4X12_USBPHY_BASE		0x125B0000
+#define EXYNOS4X12_UART_BASE		0x13800000
+#define EXYNOS4X12_I2C_BASE		0x13860000
+#define EXYNOS4X12_PWMTIMER_BASE	0x139D0000
+
+#define EXYNOS4X12_ADC_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_DP_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_MODEM_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_I2S_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_SPI_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_AUDIOSS_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_USB3PHY_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_DMC_TZASC_BASE	DEVICE_NOT_AVAILABLE
+
+/* EXYNOS5 */
+#define EXYNOS5_I2C_SPACING		0x10000
+
+#define EXYNOS5_AUDIOSS_BASE		0x03810000
+#define EXYNOS5_GPIO_PART8_BASE		0x03860000
+#define EXYNOS5_PRO_ID			0x10000000
+#define EXYNOS5_CLOCK_BASE		0x10010000
+#define EXYNOS5_POWER_BASE		0x10040000
+#define EXYNOS5_SWRESET			0x10040400
+#define EXYNOS5_SYSREG_BASE		0x10050000
+#define EXYNOS5_TZPC_BASE		0x10100000
+#define EXYNOS5_WATCHDOG_BASE		0x101D0000
+#define EXYNOS5_ACE_SFR_BASE		0x10830000
+#define EXYNOS5_DMC_PHY_BASE		0x10C00000
+#define EXYNOS5_GPIO_PART5_BASE		0x10D10000
+#define EXYNOS5_GPIO_PART6_BASE		0x10D10060
+#define EXYNOS5_GPIO_PART7_BASE		0x10D100C0
+#define EXYNOS5_DMC_CTRL_BASE		0x10DD0000
+#define EXYNOS5_GPIO_PART1_BASE		0x11400000
+#define EXYNOS5_GPIO_PART2_BASE		0x114002E0
+#define EXYNOS5_GPIO_PART3_BASE		0x11400C00
+#define EXYNOS5_MIPI_DSIM_BASE		0x11D00000
+#define EXYNOS5_USB_HOST_XHCI_BASE	0x12000000
+#define EXYNOS5_USB3PHY_BASE		0x12100000
+#define EXYNOS5_USB_HOST_EHCI_BASE	0x12110000
+#define EXYNOS5_USBPHY_BASE		0x12130000
+#define EXYNOS5_USBOTG_BASE		0x12140000
+#define EXYNOS5_MMC_BASE		0x12200000
+#define EXYNOS5_SROMC_BASE		0x12250000
+#define EXYNOS5_UART_BASE		0x12C00000
+#define EXYNOS5_I2C_BASE		0x12C60000
+#define EXYNOS5_SPI_BASE		0x12D20000
+#define EXYNOS5_I2S_BASE		0x12D60000
+#define EXYNOS5_PWMTIMER_BASE		0x12DD0000
+#define EXYNOS5_SPI_ISP_BASE		0x131A0000
+#define EXYNOS5_GPIO_PART4_BASE		0x13400000
+#define EXYNOS5_FIMD_BASE		0x14400000
+#define EXYNOS5_DP_BASE			0x145B0000
+
+#define EXYNOS5_ADC_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS5_MODEM_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS5_DMC_TZASC_BASE		DEVICE_NOT_AVAILABLE
+
+/* EXYNOS5420 */
+#define EXYNOS5420_AUDIOSS_BASE		0x03810000
+#define EXYNOS5420_GPIO_PART6_BASE	0x03860000
+#define EXYNOS5420_PRO_ID		0x10000000
+#define EXYNOS5420_CLOCK_BASE		0x10010000
+#define EXYNOS5420_POWER_BASE		0x10040000
+#define EXYNOS5420_SWRESET		0x10040400
+#define EXYNOS5420_INFORM_BASE		0x10040800
+#define EXYNOS5420_SPARE_BASE		0x10040900
+#define EXYNOS5420_CPU_CONFIG_BASE	0x10042000
+#define EXYNOS5420_CPU_STATUS_BASE	0x10042004
+#define EXYNOS5420_SYSREG_BASE		0x10050000
+#define EXYNOS5420_TZPC_BASE		0x100E0000
+#define EXYNOS5420_WATCHDOG_BASE	0x101D0000
+#define EXYNOS5420_ACE_SFR_BASE		0x10830000
+#define EXYNOS5420_DMC_PHY_BASE		0x10C00000
+#define EXYNOS5420_DMC_CTRL_BASE	0x10C20000
+#define EXYNOS5420_DMC_TZASC_BASE	0x10D40000
+#define EXYNOS5420_USB_HOST_EHCI_BASE	0x12110000
+#define EXYNOS5420_MMC_BASE		0x12200000
+#define EXYNOS5420_SROMC_BASE		0x12250000
+#define EXYNOS5420_USB3PHY_BASE	0x12500000
+#define EXYNOS5420_UART_BASE		0x12C00000
+#define EXYNOS5420_I2C_BASE		0x12C60000
+#define EXYNOS5420_I2C_8910_BASE	0x12E00000
+#define EXYNOS5420_SPI_BASE		0x12D20000
+#define EXYNOS5420_I2S_BASE		0x12D60000
+#define EXYNOS5420_PWMTIMER_BASE	0x12DD0000
+#define EXYNOS5420_SPI_ISP_BASE		0x131A0000
+#define EXYNOS5420_GPIO_PART2_BASE	0x13400000
+#define EXYNOS5420_GPIO_PART3_BASE	0x13400C00
+#define EXYNOS5420_GPIO_PART4_BASE	0x13410000
+#define EXYNOS5420_GPIO_PART5_BASE	0x14000000
+#define EXYNOS5420_GPIO_PART1_BASE	0x14010000
+#define EXYNOS5420_MIPI_DSIM_BASE	0x14500000
+#define EXYNOS5420_DP_BASE		0x145B0000
+
+#define EXYNOS5420_USBPHY_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS5420_USBOTG_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS5420_FIMD_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS5420_ADC_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS5420_MODEM_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS5420_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+/* CPU detection macros */
+extern unsigned int s5p_cpu_id;
+extern unsigned int s5p_cpu_rev;
+
+static inline int s5p_get_cpu_rev(void)
+{
+	return s5p_cpu_rev;
+}
+
+static inline void s5p_set_cpu_id(void)
+{
+	unsigned int pro_id = readl(EXYNOS4_PRO_ID);
+	unsigned int cpu_id = (pro_id & 0x00FFF000) >> 12;
+	unsigned int cpu_rev = pro_id & 0x000000FF;
+
+	switch (cpu_id) {
+	case 0x200:
+		/* Exynos4210 EVT0 */
+		s5p_cpu_id = 0x4210;
+		s5p_cpu_rev = 0;
+		break;
+	case 0x210:
+		/* Exynos4210 EVT1 */
+		s5p_cpu_id = 0x4210;
+		s5p_cpu_rev = cpu_rev;
+		break;
+	case 0x412:
+		/* Exynos4412 */
+		s5p_cpu_id = 0x4412;
+		s5p_cpu_rev = cpu_rev;
+		break;
+	case 0x520:
+		/* Exynos5250 */
+		s5p_cpu_id = 0x5250;
+		break;
+	case 0x420:
+		/* Exynos5420 */
+		s5p_cpu_id = 0x5420;
+		break;
+	case 0x422:
+		/*
+		 * Exynos5800 is a variant of Exynos5420
+		 * and has product id 0x5422
+		 */
+		s5p_cpu_id = 0x5422;
+		break;
+	}
+}
+
+static inline char *s5p_get_cpu_name(void)
+{
+	return EXYNOS_CPU_NAME;
+}
+
+#define IS_SAMSUNG_TYPE(type, id)			\
+static inline int __attribute__((no_instrument_function)) cpu_is_##type(void) \
+{							\
+	return (s5p_cpu_id >> 12) == id;		\
+}
+
+IS_SAMSUNG_TYPE(exynos4, 0x4)
+IS_SAMSUNG_TYPE(exynos5, 0x5)
+
+#define IS_EXYNOS_TYPE(type, id)			\
+static inline int __attribute__((no_instrument_function)) \
+	proid_is_##type(void)				\
+{							\
+	return s5p_cpu_id == id;			\
+}
+
+IS_EXYNOS_TYPE(exynos4210, 0x4210)
+IS_EXYNOS_TYPE(exynos4412, 0x4412)
+IS_EXYNOS_TYPE(exynos5250, 0x5250)
+IS_EXYNOS_TYPE(exynos5420, 0x5420)
+IS_EXYNOS_TYPE(exynos5422, 0x5422)
+
+#define proid_is_exynos542x() (proid_is_exynos5420() || proid_is_exynos5422())
+
+#define SAMSUNG_BASE(device, base)				\
+static inline unsigned long __attribute__((no_instrument_function)) \
+	samsung_get_base_##device(void) \
+{								\
+	if (cpu_is_exynos4()) {				\
+		if (proid_is_exynos4412())			\
+			return EXYNOS4X12_##base;		\
+		return EXYNOS4_##base;				\
+	} else if (cpu_is_exynos5()) {				\
+		if (proid_is_exynos542x())			\
+			return EXYNOS5420_##base;		\
+		return EXYNOS5_##base;				\
+	}							\
+	return 0;						\
+}
+
+SAMSUNG_BASE(adc, ADC_BASE)
+SAMSUNG_BASE(clock, CLOCK_BASE)
+SAMSUNG_BASE(ace_sfr, ACE_SFR_BASE)
+SAMSUNG_BASE(sysreg, SYSREG_BASE)
+SAMSUNG_BASE(i2c, I2C_BASE)
+SAMSUNG_BASE(i2s, I2S_BASE)
+SAMSUNG_BASE(mipi_dsim, MIPI_DSIM_BASE)
+SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE)
+SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE)
+SAMSUNG_BASE(gpio_part3, GPIO_PART3_BASE)
+SAMSUNG_BASE(gpio_part4, GPIO_PART4_BASE)
+SAMSUNG_BASE(pro_id, PRO_ID)
+SAMSUNG_BASE(mmc, MMC_BASE)
+SAMSUNG_BASE(modem, MODEM_BASE)
+SAMSUNG_BASE(sromc, SROMC_BASE)
+SAMSUNG_BASE(swreset, SWRESET)
+SAMSUNG_BASE(timer, PWMTIMER_BASE)
+SAMSUNG_BASE(uart, UART_BASE)
+SAMSUNG_BASE(usb_phy, USBPHY_BASE)
+SAMSUNG_BASE(usb3_phy, USB3PHY_BASE)
+SAMSUNG_BASE(usb_ehci, USB_HOST_EHCI_BASE)
+SAMSUNG_BASE(usb_xhci, USB_HOST_XHCI_BASE)
+SAMSUNG_BASE(usb_otg, USBOTG_BASE)
+SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
+SAMSUNG_BASE(power, POWER_BASE)
+SAMSUNG_BASE(spi, SPI_BASE)
+SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)
+SAMSUNG_BASE(tzpc, TZPC_BASE)
+SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE)
+SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE)
+SAMSUNG_BASE(dmc_tzasc, DMC_TZASC_BASE)
+SAMSUNG_BASE(audio_ass, AUDIOSS_BASE)
+#endif
+
+#endif	/* _EXYNOS4_CPU_H */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/dmc.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/dmc.h
new file mode 100644
index 000000000..4990a1af3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/dmc.h
@@ -0,0 +1,501 @@
+#ifndef __DMC_H__
+#define __DMC_H__
+
+#ifndef __ASSEMBLY__
+struct exynos4_dmc {
+	unsigned int concontrol;
+	unsigned int memcontrol;
+	unsigned int memconfig0;
+	unsigned int memconfig1;
+	unsigned int directcmd;
+	unsigned int prechconfig;
+	unsigned int phycontrol0;
+	unsigned int phycontrol1;
+	unsigned int phycontrol2;
+	unsigned int phycontrol3;
+	unsigned int pwrdnconfig;
+	unsigned char res1[0x4];
+	unsigned int timingref;
+	unsigned int timingrow;
+	unsigned int timingdata;
+	unsigned int timingpower;
+	unsigned int phystatus;
+	unsigned int phyzqcontrol;
+	unsigned int chip0status;
+	unsigned int chip1status;
+	unsigned int arefstatus;
+	unsigned int mrstatus;
+	unsigned int phytest0;
+	unsigned int phytest1;
+	unsigned int qoscontrol0;
+	unsigned int qosconfig0;
+	unsigned int qoscontrol1;
+	unsigned int qosconfig1;
+	unsigned int qoscontrol2;
+	unsigned int qosconfig2;
+	unsigned int qoscontrol3;
+	unsigned int qosconfig3;
+	unsigned int qoscontrol4;
+	unsigned int qosconfig4;
+	unsigned int qoscontrol5;
+	unsigned int qosconfig5;
+	unsigned int qoscontrol6;
+	unsigned int qosconfig6;
+	unsigned int qoscontrol7;
+	unsigned int qosconfig7;
+	unsigned int qoscontrol8;
+	unsigned int qosconfig8;
+	unsigned int qoscontrol9;
+	unsigned int qosconfig9;
+	unsigned int qoscontrol10;
+	unsigned int qosconfig10;
+	unsigned int qoscontrol11;
+	unsigned int qosconfig11;
+	unsigned int qoscontrol12;
+	unsigned int qosconfig12;
+	unsigned int qoscontrol13;
+	unsigned int qosconfig13;
+	unsigned int qoscontrol14;
+	unsigned int qosconfig14;
+	unsigned int qoscontrol15;
+	unsigned int qosconfig15;
+	unsigned int qostimeout0;
+	unsigned int qostimeout1;
+	unsigned char res2[0x8];
+	unsigned int ivcontrol;
+	unsigned char res3[0x8];
+	unsigned int perevconfig;
+	unsigned char res4[0xDF00];
+	unsigned int pmnc_ppc_a;
+	unsigned char res5[0xC];
+	unsigned int cntens_ppc_a;
+	unsigned char res6[0xC];
+	unsigned int cntenc_ppc_a;
+	unsigned char res7[0xC];
+	unsigned int intens_ppc_a;
+	unsigned char res8[0xC];
+	unsigned int intenc_ppc_a;
+	unsigned char res9[0xC];
+	unsigned int flag_ppc_a;
+	unsigned char res10[0xAC];
+	unsigned int ccnt_ppc_a;
+	unsigned char res11[0xC];
+	unsigned int pmcnt0_ppc_a;
+	unsigned char res12[0xC];
+	unsigned int pmcnt1_ppc_a;
+	unsigned char res13[0xC];
+	unsigned int pmcnt2_ppc_a;
+	unsigned char res14[0xC];
+	unsigned int pmcnt3_ppc_a;
+	unsigned char res15[0xEBC];
+	unsigned int pmnc_ppc_m;
+	unsigned char res16[0xC];
+	unsigned int cntens_ppc_m;
+	unsigned char res17[0xC];
+	unsigned int cntenc_ppc_m;
+	unsigned char res18[0xC];
+	unsigned int intens_ppc_m;
+	unsigned char res19[0xC];
+	unsigned int intenc_ppc_m;
+	unsigned char res20[0xC];
+	unsigned int flag_ppc_m;
+	unsigned char res21[0xAC];
+	unsigned int ccnt_ppc_m;
+	unsigned char res22[0xC];
+	unsigned int pmcnt0_ppc_m;
+	unsigned char res23[0xC];
+	unsigned int pmcnt1_ppc_m;
+	unsigned char res24[0xC];
+	unsigned int pmcnt2_ppc_m;
+	unsigned char res25[0xC];
+	unsigned int pmcnt3_ppc_m;
+};
+
+struct exynos5_dmc {
+	unsigned int concontrol;
+	unsigned int memcontrol;
+	unsigned int memconfig0;
+	unsigned int memconfig1;
+	unsigned int directcmd;
+	unsigned int prechconfig;
+	unsigned int phycontrol0;
+	unsigned char res1[0xc];
+	unsigned int pwrdnconfig;
+	unsigned int timingpzq;
+	unsigned int timingref;
+	unsigned int timingrow;
+	unsigned int timingdata;
+	unsigned int timingpower;
+	unsigned int phystatus;
+	unsigned char res2[0x4];
+	unsigned int chipstatus_ch0;
+	unsigned int chipstatus_ch1;
+	unsigned char res3[0x4];
+	unsigned int mrstatus;
+	unsigned char res4[0x8];
+	unsigned int qoscontrol0;
+	unsigned char resr5[0x4];
+	unsigned int qoscontrol1;
+	unsigned char res6[0x4];
+	unsigned int qoscontrol2;
+	unsigned char res7[0x4];
+	unsigned int qoscontrol3;
+	unsigned char res8[0x4];
+	unsigned int qoscontrol4;
+	unsigned char res9[0x4];
+	unsigned int qoscontrol5;
+	unsigned char res10[0x4];
+	unsigned int qoscontrol6;
+	unsigned char res11[0x4];
+	unsigned int qoscontrol7;
+	unsigned char res12[0x4];
+	unsigned int qoscontrol8;
+	unsigned char res13[0x4];
+	unsigned int qoscontrol9;
+	unsigned char res14[0x4];
+	unsigned int qoscontrol10;
+	unsigned char res15[0x4];
+	unsigned int qoscontrol11;
+	unsigned char res16[0x4];
+	unsigned int qoscontrol12;
+	unsigned char res17[0x4];
+	unsigned int qoscontrol13;
+	unsigned char res18[0x4];
+	unsigned int qoscontrol14;
+	unsigned char res19[0x4];
+	unsigned int qoscontrol15;
+	unsigned char res20[0x14];
+	unsigned int ivcontrol;
+	unsigned int wrtra_config;
+	unsigned int rdlvl_config;
+	unsigned char res21[0x8];
+	unsigned int brbrsvconfig;
+	unsigned int brbqosconfig;
+	unsigned int membaseconfig0;
+	unsigned int membaseconfig1;
+	unsigned char res22[0xc];
+	unsigned int wrlvl_config;
+	unsigned char res23[0xc];
+	unsigned int perevcontrol;
+	unsigned int perev0config;
+	unsigned int perev1config;
+	unsigned int perev2config;
+	unsigned int perev3config;
+	unsigned char res24[0xdebc];
+	unsigned int pmnc_ppc_a;
+	unsigned char res25[0xc];
+	unsigned int cntens_ppc_a;
+	unsigned char res26[0xc];
+	unsigned int cntenc_ppc_a;
+	unsigned char res27[0xc];
+	unsigned int intens_ppc_a;
+	unsigned char res28[0xc];
+	unsigned int intenc_ppc_a;
+	unsigned char res29[0xc];
+	unsigned int flag_ppc_a;
+	unsigned char res30[0xac];
+	unsigned int ccnt_ppc_a;
+	unsigned char res31[0xc];
+	unsigned int pmcnt0_ppc_a;
+	unsigned char res32[0xc];
+	unsigned int pmcnt1_ppc_a;
+	unsigned char res33[0xc];
+	unsigned int pmcnt2_ppc_a;
+	unsigned char res34[0xc];
+	unsigned int pmcnt3_ppc_a;
+};
+
+struct exynos5420_dmc {
+	unsigned int concontrol;
+	unsigned int memcontrol;
+	unsigned int cgcontrol;
+	unsigned char res500[0x4];
+	unsigned int directcmd;
+	unsigned int prechconfig0;
+	unsigned int phycontrol0;
+	unsigned int prechconfig1;
+	unsigned char res1[0x8];
+	unsigned int pwrdnconfig;
+	unsigned int timingpzq;
+	unsigned int timingref;
+	unsigned int timingrow0;
+	unsigned int timingdata0;
+	unsigned int timingpower0;
+	unsigned int phystatus;
+	unsigned int etctiming;
+	unsigned int chipstatus;
+	unsigned char res3[0x8];
+	unsigned int mrstatus;
+	unsigned char res4[0x8];
+	unsigned int qoscontrol0;
+	unsigned char resr5[0x4];
+	unsigned int qoscontrol1;
+	unsigned char res6[0x4];
+	unsigned int qoscontrol2;
+	unsigned char res7[0x4];
+	unsigned int qoscontrol3;
+	unsigned char res8[0x4];
+	unsigned int qoscontrol4;
+	unsigned char res9[0x4];
+	unsigned int qoscontrol5;
+	unsigned char res10[0x4];
+	unsigned int qoscontrol6;
+	unsigned char res11[0x4];
+	unsigned int qoscontrol7;
+	unsigned char res12[0x4];
+	unsigned int qoscontrol8;
+	unsigned char res13[0x4];
+	unsigned int qoscontrol9;
+	unsigned char res14[0x4];
+	unsigned int qoscontrol10;
+	unsigned char res15[0x4];
+	unsigned int qoscontrol11;
+	unsigned char res16[0x4];
+	unsigned int qoscontrol12;
+	unsigned char res17[0x4];
+	unsigned int qoscontrol13;
+	unsigned char res18[0x4];
+	unsigned int qoscontrol14;
+	unsigned char res19[0x4];
+	unsigned int qoscontrol15;
+	unsigned char res20[0x4];
+	unsigned int timing_set_sw;
+	unsigned int timingrow1;
+	unsigned int timingdata1;
+	unsigned int timingpower1;
+	unsigned char res300[0x4];
+	unsigned int wrtra_config;
+	unsigned int rdlvl_config;
+	unsigned char res21[0x4];
+	unsigned int brbrsvcontrol;
+	unsigned int brbrsvconfig;
+	unsigned int brbqosconfig;
+	unsigned char res301[0x14];
+	unsigned int wrlvl_config0;
+	unsigned int wrlvl_config1;
+	unsigned int wrlvl_status;
+	unsigned char res23[0x4];
+	unsigned int ppcclockon;
+	unsigned int perevconfig0;
+	unsigned int perevconfig1;
+	unsigned int perevconfig2;
+	unsigned int perevconfig3;
+	unsigned char res24[0xc];
+	unsigned int control_io_rdata;
+	unsigned char res240[0xc];
+	unsigned int cacal_config0;
+	unsigned int cacal_config1;
+	unsigned int cacal_status;
+	unsigned char res302[0xa4];
+	unsigned int bp_control0;
+	unsigned int bp_config0_r;
+	unsigned int bp_config0_w;
+	unsigned char res303[0x4];
+	unsigned int bp_control1;
+	unsigned int bp_config1_r;
+	unsigned int bp_config1_w;
+	unsigned char res304[0x4];
+	unsigned int bp_control2;
+	unsigned int bp_config2_r;
+	unsigned int bp_config2_w;
+	unsigned char res305[0x4];
+	unsigned int bp_control3;
+	unsigned int bp_config3_r;
+	unsigned int bp_config3_w;
+	unsigned char res306[0xddb4];
+	unsigned int pmnc_ppc;
+	unsigned char res25[0xc];
+	unsigned int cntens_ppc;
+	unsigned char res26[0xc];
+	unsigned int cntenc_ppc;
+	unsigned char res27[0xc];
+	unsigned int intens_ppc;
+	unsigned char res28[0xc];
+	unsigned int intenc_ppc;
+	unsigned char res29[0xc];
+	unsigned int flag_ppc;
+	unsigned char res30[0xac];
+	unsigned int ccnt_ppc;
+	unsigned char res31[0xc];
+	unsigned int pmcnt0_ppc;
+	unsigned char res32[0xc];
+	unsigned int pmcnt1_ppc;
+	unsigned char res33[0xc];
+	unsigned int pmcnt2_ppc;
+	unsigned char res34[0xc];
+	unsigned int pmcnt3_ppc;
+};
+
+struct exynos5_phy_control {
+	unsigned int phy_con0;
+	unsigned int phy_con1;
+	unsigned int phy_con2;
+	unsigned int phy_con3;
+	unsigned int phy_con4;
+	unsigned char res1[4];
+	unsigned int phy_con6;
+	unsigned char res2[4];
+	unsigned int phy_con8;
+	unsigned int phy_con9;
+	unsigned int phy_con10;
+	unsigned char res3[4];
+	unsigned int phy_con12;
+	unsigned int phy_con13;
+	unsigned int phy_con14;
+	unsigned int phy_con15;
+	unsigned int phy_con16;
+	unsigned char res4[4];
+	unsigned int phy_con17;
+	unsigned int phy_con18;
+	unsigned int phy_con19;
+	unsigned int phy_con20;
+	unsigned int phy_con21;
+	unsigned int phy_con22;
+	unsigned int phy_con23;
+	unsigned int phy_con24;
+	unsigned int phy_con25;
+	unsigned int phy_con26;
+	unsigned int phy_con27;
+	unsigned int phy_con28;
+	unsigned int phy_con29;
+	unsigned int phy_con30;
+	unsigned int phy_con31;
+	unsigned int phy_con32;
+	unsigned int phy_con33;
+	unsigned int phy_con34;
+	unsigned int phy_con35;
+	unsigned int phy_con36;
+	unsigned int phy_con37;
+	unsigned int phy_con38;
+	unsigned int phy_con39;
+	unsigned int phy_con40;
+	unsigned int phy_con41;
+	unsigned int phy_con42;
+};
+
+struct exynos5420_phy_control {
+	unsigned int phy_con0;
+	unsigned int phy_con1;
+	unsigned int phy_con2;
+	unsigned int phy_con3;
+	unsigned int phy_con4;
+	unsigned int phy_con5;
+	unsigned int phy_con6;
+	unsigned char res2[0x4];
+	unsigned int phy_con8;
+	unsigned char res5[0x4];
+	unsigned int phy_con10;
+	unsigned int phy_con11;
+	unsigned int phy_con12;
+	unsigned int phy_con13;
+	unsigned int phy_con14;
+	unsigned int phy_con15;
+	unsigned int phy_con16;
+	unsigned char res4[0x4];
+	unsigned int phy_con17;
+	unsigned int phy_con18;
+	unsigned int phy_con19;
+	unsigned int phy_con20;
+	unsigned int phy_con21;
+	unsigned int phy_con22;
+	unsigned int phy_con23;
+	unsigned int phy_con24;
+	unsigned int phy_con25;
+	unsigned int phy_con26;
+	unsigned int phy_con27;
+	unsigned int phy_con28;
+	unsigned int phy_con29;
+	unsigned int phy_con30;
+	unsigned int phy_con31;
+	unsigned int phy_con32;
+	unsigned int phy_con33;
+	unsigned int phy_con34;
+	unsigned char res6[0x8];
+	unsigned int phy_con37;
+	unsigned char res7[0x4];
+	unsigned int phy_con39;
+	unsigned int phy_con40;
+	unsigned int phy_con41;
+	unsigned int phy_con42;
+};
+
+struct exynos5420_tzasc {
+	unsigned char res1[0xf00];
+	unsigned int membaseconfig0;
+	unsigned int membaseconfig1;
+	unsigned char res2[0x8];
+	unsigned int memconfig0;
+	unsigned int memconfig1;
+};
+
+enum ddr_mode {
+	DDR_MODE_DDR2,
+	DDR_MODE_DDR3,
+	DDR_MODE_LPDDR2,
+	DDR_MODE_LPDDR3,
+
+	DDR_MODE_COUNT,
+};
+
+enum mem_manuf {
+	MEM_MANUF_AUTODETECT,
+	MEM_MANUF_ELPIDA,
+	MEM_MANUF_SAMSUNG,
+
+	MEM_MANUF_COUNT,
+};
+
+/* CONCONTROL register fields */
+#define CONCONTROL_DFI_INIT_START_SHIFT	28
+#define CONCONTROL_RD_FETCH_SHIFT	12
+#define CONCONTROL_RD_FETCH_MASK	(0x7 << CONCONTROL_RD_FETCH_SHIFT)
+#define CONCONTROL_AREF_EN_SHIFT	5
+#define CONCONTROL_UPDATE_MODE		(1 << 3)
+
+/* PRECHCONFIG register field */
+#define PRECHCONFIG_TP_CNT_SHIFT	24
+
+/* PWRDNCONFIG register field */
+#define PWRDNCONFIG_DPWRDN_CYC_SHIFT	0
+#define PWRDNCONFIG_DSREF_CYC_SHIFT	16
+
+/* PHY_CON0 register fields */
+#define PHY_CON0_T_WRRDCMD_SHIFT	17
+#define PHY_CON0_T_WRRDCMD_MASK		(0x7 << PHY_CON0_T_WRRDCMD_SHIFT)
+#define PHY_CON0_CTRL_DDR_MODE_SHIFT	11
+#define PHY_CON0_CTRL_DDR_MODE_MASK	0x3
+
+/* PHY_CON1 register fields */
+#define PHY_CON1_RDLVL_RDDATA_ADJ_SHIFT	0
+
+/* PHY_CON4 rgister fields */
+#define PHY_CON10_CTRL_OFFSETR3		(1 << 24)
+
+/* PHY_CON12 register fields */
+#define PHY_CON12_CTRL_START_POINT_SHIFT	24
+#define PHY_CON12_CTRL_INC_SHIFT	16
+#define PHY_CON12_CTRL_FORCE_SHIFT	8
+#define PHY_CON12_CTRL_START_SHIFT	6
+#define PHY_CON12_CTRL_START_MASK	(1 << PHY_CON12_CTRL_START_SHIFT)
+#define PHY_CON12_CTRL_DLL_ON_SHIFT	5
+#define PHY_CON12_CTRL_DLL_ON_MASK	(1 << PHY_CON12_CTRL_DLL_ON_SHIFT)
+#define PHY_CON12_CTRL_REF_SHIFT	1
+
+/* PHY_CON16 register fields */
+#define PHY_CON16_ZQ_MODE_DDS_SHIFT	24
+#define PHY_CON16_ZQ_MODE_DDS_MASK	(0x7 << PHY_CON16_ZQ_MODE_DDS_SHIFT)
+
+#define PHY_CON16_ZQ_MODE_TERM_SHIFT 21
+#define PHY_CON16_ZQ_MODE_TERM_MASK	(0x7 << PHY_CON16_ZQ_MODE_TERM_SHIFT)
+
+#define PHY_CON16_ZQ_MODE_NOTERM_MASK	(1 << 19)
+
+/* PHY_CON42 register fields */
+#define PHY_CON42_CTRL_BSTLEN_SHIFT	8
+#define PHY_CON42_CTRL_BSTLEN_MASK	(0xff << PHY_CON42_CTRL_BSTLEN_SHIFT)
+
+#define PHY_CON42_CTRL_RDLAT_SHIFT	0
+#define PHY_CON42_CTRL_RDLAT_MASK	(0x1f << PHY_CON42_CTRL_RDLAT_SHIFT)
+
+#endif
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/dp.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/dp.h
new file mode 100644
index 000000000..104a9d6ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/dp.h
@@ -0,0 +1,737 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_DP_H_
+#define __ASM_ARM_ARCH_DP_H_
+
+#ifndef __ASSEMBLY__
+
+struct exynos_dp {
+	unsigned char	res1[0x10];
+	unsigned int	tx_version;
+	unsigned int	tx_sw_reset;
+	unsigned int	func_en1;
+	unsigned int	func_en2;
+	unsigned int	video_ctl1;
+	unsigned int	video_ctl2;
+	unsigned int	video_ctl3;
+	unsigned int	video_ctl4;
+	unsigned int	color_blue_cb;
+	unsigned int	color_green_y;
+	unsigned int	color_red_cr;
+	unsigned int	video_ctl8;
+	unsigned char	res2[0x4];
+	unsigned int	video_ctl10;
+	unsigned int	total_ln_cfg_l;
+	unsigned int	total_ln_cfg_h;
+	unsigned int	active_ln_cfg_l;
+	unsigned int	active_ln_cfg_h;
+	unsigned int	vfp_cfg;
+	unsigned int	vsw_cfg;
+	unsigned int	vbp_cfg;
+	unsigned int	total_pix_cfg_l;
+	unsigned int	total_pix_cfg_h;
+	unsigned int	active_pix_cfg_l;
+	unsigned int	active_pix_cfg_h;
+	unsigned int	hfp_cfg_l;
+	unsigned int	hfp_cfg_h;
+	unsigned int	hsw_cfg_l;
+	unsigned int	hsw_cfg_h;
+	unsigned int	hbp_cfg_l;
+	unsigned int	hbp_cfg_h;
+	unsigned int	video_status;
+	unsigned int	total_ln_sta_l;
+	unsigned int	total_ln_sta_h;
+	unsigned int	active_ln_sta_l;
+	unsigned int	active_ln_sta_h;
+
+	unsigned int	vfp_sta;
+	unsigned int	vsw_sta;
+	unsigned int	vbp_sta;
+
+	unsigned int	total_pix_sta_l;
+	unsigned int	total_pix_sta_h;
+	unsigned int	active_pix_sta_l;
+	unsigned int	active_pix_sta_h;
+
+	unsigned int	hfp_sta_l;
+	unsigned int	hfp_sta_h;
+	unsigned int	hsw_sta_l;
+	unsigned int	hsw_sta_h;
+	unsigned int	hbp_sta_l;
+	unsigned int	hbp_sta_h;
+
+	unsigned char	res3[0x288];
+
+	unsigned int	lane_map;
+	unsigned char	res4[0x10];
+	unsigned int	analog_ctl1;
+	unsigned int	analog_ctl2;
+	unsigned int	analog_ctl3;
+
+	unsigned int	pll_filter_ctl1;
+	unsigned int	amp_tuning_ctl;
+	unsigned char	res5[0xc];
+
+	unsigned int	aux_hw_retry_ctl;
+	unsigned char	res6[0x2c];
+	unsigned int	int_state;
+	unsigned int	common_int_sta1;
+	unsigned int	common_int_sta2;
+	unsigned int	common_int_sta3;
+	unsigned int	common_int_sta4;
+	unsigned char	res7[0x8];
+
+	unsigned int	int_sta;
+	unsigned char	res8[0x1c];
+	unsigned int	int_ctl;
+	unsigned char	res9[0x200];
+	unsigned int	sys_ctl1;
+	unsigned int	sys_ctl2;
+	unsigned int	sys_ctl3;
+	unsigned int	sys_ctl4;
+	unsigned int	vid_ctl;
+	unsigned char	res10[0x2c];
+	unsigned int	pkt_send_ctl;
+	unsigned char	res[0x4];
+	unsigned int	hdcp_ctl;
+	unsigned char	res11[0x34];
+	unsigned int	link_bw_set;
+
+	unsigned int	lane_count_set;
+	unsigned int	training_ptn_set;
+	unsigned int	ln0_link_training_ctl;
+	unsigned int	ln1_link_training_ctl;
+	unsigned int	ln2_link_training_ctl;
+	unsigned int	ln3_link_training_ctl;
+	unsigned int	dn_spread_ctl;
+	unsigned int	hw_link_training_ctl;
+	unsigned char	res12[0x1c];
+
+	unsigned int	debug_ctl;
+	unsigned int	hpd_deglitch_l;
+	unsigned int	hpd_deglitch_h;
+
+	unsigned char	res13[0x14];
+	unsigned int	link_debug_ctl;
+
+	unsigned char	res14[0x1c];
+
+	unsigned int	m_vid0;
+	unsigned int	m_vid1;
+	unsigned int	m_vid2;
+	unsigned int	n_vid0;
+	unsigned int	n_vid1;
+	unsigned int	n_vid2;
+	unsigned int	m_vid_mon;
+	unsigned int	pll_ctl;
+	unsigned int	phy_pd;
+	unsigned int	phy_test;
+	unsigned char	res15[0x8];
+
+	unsigned int	video_fifo_thrd;
+	unsigned char	res16[0x8];
+	unsigned int	audio_margin;
+
+	unsigned int	dn_spread_ctl1;
+	unsigned int	dn_spread_ctl2;
+	unsigned char	res17[0x18];
+	unsigned int	m_cal_ctl;
+	unsigned int	m_vid_gen_filter_th;
+	unsigned char	res18[0x10];
+	unsigned int	m_aud_gen_filter_th;
+	unsigned char	res50[0x4];
+
+	unsigned int	aux_ch_sta;
+	unsigned int	aux_err_num;
+	unsigned int	aux_ch_defer_ctl;
+	unsigned int	aux_rx_comm;
+	unsigned int	buffer_data_ctl;
+
+	unsigned int	aux_ch_ctl1;
+	unsigned int	aux_addr_7_0;
+	unsigned int	aux_addr_15_8;
+	unsigned int	aux_addr_19_16;
+	unsigned int	aux_ch_ctl2;
+	unsigned char	res19[0x18];
+	unsigned int	buf_data0;
+	unsigned char	res20[0x3c];
+
+	unsigned int	soc_general_ctl;
+	unsigned char	res21[0x8c];
+	unsigned int	crc_con;
+	unsigned int	crc_result;
+	unsigned char	res22[0x8];
+
+	unsigned int	common_int_mask1;
+	unsigned int	common_int_mask2;
+	unsigned int	common_int_mask3;
+	unsigned int	common_int_mask4;
+	unsigned int	int_sta_mask1;
+	unsigned int	int_sta_mask2;
+	unsigned int	int_sta_mask3;
+	unsigned int	int_sta_mask4;
+	unsigned int	int_sta_mask;
+	unsigned int	crc_result2;
+	unsigned int	scrambler_reset_cnt;
+
+	unsigned int	pn_inv;
+	unsigned int	psr_config;
+	unsigned int	psr_command0;
+	unsigned int	psr_command1;
+	unsigned int	psr_crc_mon0;
+	unsigned int	psr_crc_mon1;
+
+	unsigned char	res24[0x30];
+	unsigned int	phy_bist_ctrl;
+	unsigned char	res25[0xc];
+	unsigned int	phy_ctrl;
+	unsigned char	res26[0x1c];
+	unsigned int	test_pattern_gen_en;
+	unsigned int	test_pattern_gen_ctrl;
+};
+
+#endif	/* __ASSEMBLY__ */
+
+/* For DP VIDEO CTL 1 */
+#define VIDEO_EN_MASK				(0x01 << 7)
+#define VIDEO_MUTE_MASK				(0x01 << 6)
+
+/* For DP VIDEO CTL 4 */
+#define VIDEO_BIST_MASK				(0x1 << 3)
+
+/* EXYNOS_DP_ANALOG_CTL_1 */
+#define SEL_BG_NEW_BANDGAP			(0x0 << 6)
+#define SEL_BG_INTERNAL_RESISTOR		(0x1 << 6)
+#define TX_TERMINAL_CTRL_73_OHM			(0x0 << 4)
+#define TX_TERMINAL_CTRL_61_OHM			(0x1 << 4)
+#define TX_TERMINAL_CTRL_50_OHM			(0x2 << 4)
+#define TX_TERMINAL_CTRL_45_OHM			(0x3 << 4)
+#define SWING_A_30PER_G_INCREASE		(0x1 << 3)
+#define SWING_A_30PER_G_NORMAL			(0x0 << 3)
+
+/* EXYNOS_DP_ANALOG_CTL_2 */
+#define CPREG_BLEED				(0x1 << 4)
+#define SEL_24M					(0x1 << 3)
+#define TX_DVDD_BIT_1_0000V			(0x3 << 0)
+#define TX_DVDD_BIT_1_0625V			(0x4 << 0)
+#define TX_DVDD_BIT_1_1250V			(0x5 << 0)
+
+/* EXYNOS_DP_ANALOG_CTL_3 */
+#define DRIVE_DVDD_BIT_1_0000V			(0x3 << 5)
+#define DRIVE_DVDD_BIT_1_0625V			(0x4 << 5)
+#define DRIVE_DVDD_BIT_1_1250V			(0x5 << 5)
+#define SEL_CURRENT_DEFAULT			(0x0 << 3)
+#define VCO_BIT_000_MICRO			(0x0 << 0)
+#define VCO_BIT_200_MICRO			(0x1 << 0)
+#define VCO_BIT_300_MICRO			(0x2 << 0)
+#define VCO_BIT_400_MICRO			(0x3 << 0)
+#define VCO_BIT_500_MICRO			(0x4 << 0)
+#define VCO_BIT_600_MICRO			(0x5 << 0)
+#define VCO_BIT_700_MICRO			(0x6 << 0)
+#define VCO_BIT_900_MICRO			(0x7 << 0)
+
+/* EXYNOS_DP_PLL_FILTER_CTL_1 */
+#define PD_RING_OSC				(0x1 << 6)
+#define AUX_TERMINAL_CTRL_52_OHM		(0x3 << 4)
+#define AUX_TERMINAL_CTRL_69_OHM		(0x2 << 4)
+#define AUX_TERMINAL_CTRL_102_OHM		(0x1 << 4)
+#define AUX_TERMINAL_CTRL_200_OHM		(0x0 << 4)
+#define TX_CUR1_1X				(0x0 << 2)
+#define TX_CUR1_2X				(0x1 << 2)
+#define TX_CUR1_3X				(0x2 << 2)
+#define TX_CUR_1_MA				(0x0 << 0)
+#define TX_CUR_2_MA			        (0x1 << 0)
+#define TX_CUR_3_MA				(0x2 << 0)
+#define TX_CUR_4_MA				(0x3 << 0)
+
+/* EXYNOS_DP_PLL_FILTER_CTL_2 */
+#define CH3_AMP_0_MV				(0x3 << 12)
+#define CH2_AMP_0_MV				(0x3 << 8)
+#define CH1_AMP_0_MV				(0x3 << 4)
+#define CH0_AMP_0_MV				(0x3 << 0)
+
+/* EXYNOS_DP_PLL_CTL */
+#define DP_PLL_PD			        (0x1 << 7)
+#define DP_PLL_RESET				(0x1 << 6)
+#define DP_PLL_LOOP_BIT_DEFAULT		        (0x1 << 4)
+#define DP_PLL_REF_BIT_1_1250V			(0x5 << 0)
+#define DP_PLL_REF_BIT_1_2500V		        (0x7 << 0)
+
+/* EXYNOS_DP_INT_CTL */
+#define SOFT_INT_CTRL				(0x1 << 2)
+#define INT_POL					(0x1 << 0)
+
+/* DP TX SW RESET */
+#define RESET_DP_TX				(0x01 << 0)
+
+/* DP FUNC_EN_1 */
+#define MASTER_VID_FUNC_EN_N			(0x1 << 7)
+#define SLAVE_VID_FUNC_EN_N			(0x1 << 5)
+#define AUD_FIFO_FUNC_EN_N			(0x1 << 4)
+#define AUD_FUNC_EN_N				(0x1 << 3)
+#define HDCP_FUNC_EN_N				(0x1 << 2)
+#define CRC_FUNC_EN_N				(0x1 << 1)
+#define SW_FUNC_EN_N				(0x1 << 0)
+
+/* DP FUNC_EN_2 */
+#define SSC_FUNC_EN_N			        (0x1 << 7)
+#define AUX_FUNC_EN_N				(0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N			(0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N		        (0x1 << 0)
+
+/* EXYNOS_DP_PHY_PD */
+#define PHY_PD					(0x1 << 5)
+#define AUX_PD					(0x1 << 4)
+#define CH3_PD					(0x1 << 3)
+#define CH2_PD					(0x1 << 2)
+#define CH1_PD					(0x1 << 1)
+#define CH0_PD					(0x1 << 0)
+
+/* EXYNOS_DP_COMMON_INT_STA_1 */
+#define VSYNC_DET				(0x1 << 7)
+#define PLL_LOCK_CHG				(0x1 << 6)
+#define SPDIF_ERR				(0x1 << 5)
+#define SPDIF_UNSTBL				(0x1 << 4)
+#define VID_FORMAT_CHG				(0x1 << 3)
+#define AUD_CLK_CHG				(0x1 << 2)
+#define VID_CLK_CHG				(0x1 << 1)
+#define SW_INT					(0x1 << 0)
+
+/* EXYNOS_DP_DEBUG_CTL */
+#define PLL_LOCK				(0x1 << 4)
+#define F_PLL_LOCK				(0x1 << 3)
+#define PLL_LOCK_CTRL				(0x1 << 2)
+
+/* EXYNOS_DP_FUNC_EN_2 */
+#define SSC_FUNC_EN_N				(0x1 << 7)
+#define AUX_FUNC_EN_N				(0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N			(0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N			(0x1 << 0)
+
+/* EXYNOS_DP_COMMON_INT_STA_4 */
+#define PSR_ACTIVE				(0x1 << 7)
+#define PSR_INACTIVE				(0x1 << 6)
+#define SPDIF_BI_PHASE_ERR			(0x1 << 5)
+#define HOTPLUG_CHG				(0x1 << 2)
+#define HPD_LOST				(0x1 << 1)
+#define PLUG					(0x1 << 0)
+
+/* EXYNOS_DP_INT_STA */
+#define INT_HPD					(0x1 << 6)
+#define HW_TRAINING_FINISH			(0x1 << 5)
+#define RPLY_RECEIV				(0x1 << 1)
+#define AUX_ERR					(0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_3 */
+#define HPD_STATUS				(0x1 << 6)
+#define F_HPD					(0x1 << 5)
+#define HPD_CTRL				(0x1 << 4)
+#define HDCP_RDY				(0x1 << 3)
+#define STRM_VALID				(0x1 << 2)
+#define F_VALID					(0x1 << 1)
+#define VALID_CTRL				(0x1 << 0)
+
+/* EXYNOS_DP_AUX_HW_RETRY_CTL */
+#define AUX_BIT_PERIOD_EXPECTED_DELAY(x)	(((x) & 0x7) << 8)
+#define AUX_HW_RETRY_INTERVAL_MASK		(0x3 << 3)
+#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS	(0x0 << 3)
+#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS	(0x1 << 3)
+#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS	(0x2 << 3)
+#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS	(0x3 << 3)
+#define AUX_HW_RETRY_COUNT_SEL(x)		(((x) & 0x7) << 0)
+
+/* EXYNOS_DP_AUX_CH_DEFER_CTL */
+#define DEFER_CTRL_EN				(0x1 << 7)
+#define DEFER_COUNT(x)				(((x) & 0x7f) << 0)
+
+#define COMMON_INT_MASK_1			(0)
+#define COMMON_INT_MASK_2			(0)
+#define COMMON_INT_MASK_3			(0)
+#define COMMON_INT_MASK_4			(0)
+#define INT_STA_MASK				(0)
+
+/* EXYNOS_DP_BUFFER_DATA_CTL */
+#define BUF_CLR					(0x1 << 7)
+#define BUF_DATA_COUNT(x)			(((x) & 0x1f) << 0)
+
+/* EXYNOS_DP_AUX_ADDR_7_0 */
+#define AUX_ADDR_7_0(x)				(((x) >> 0) & 0xff)
+
+/* EXYNOS_DP_AUX_ADDR_15_8 */
+#define AUX_ADDR_15_8(x)			(((x) >> 8) & 0xff)
+
+/* EXYNOS_DP_AUX_ADDR_19_16 */
+#define AUX_ADDR_19_16(x)			(((x) >> 16) & 0x0f)
+
+/* EXYNOS_DP_AUX_CH_CTL_1 */
+#define AUX_LENGTH(x)				(((x - 1) & 0xf) << 4)
+#define AUX_TX_COMM_MASK			(0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION		(0x1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION		(0x0 << 3)
+#define AUX_TX_COMM_MOT				(0x1 << 2)
+#define AUX_TX_COMM_WRITE			(0x0 << 0)
+#define AUX_TX_COMM_READ			(0x1 << 0)
+
+/* EXYNOS_DP_AUX_CH_CTL_2 */
+#define ADDR_ONLY				(0x1 << 1)
+#define AUX_EN					(0x1 << 0)
+
+/* EXYNOS_DP_AUX_CH_STA */
+#define AUX_BUSY				(0x1 << 4)
+#define AUX_STATUS_MASK				(0xf << 0)
+
+/* EXYNOS_DP_AUX_RX_COMM */
+#define AUX_RX_COMM_I2C_DEFER			(0x2 << 2)
+#define AUX_RX_COMM_AUX_DEFER			(0x2 << 0)
+
+/* EXYNOS_DP_PHY_TEST */
+#define MACRO_RST				(0x1 << 5)
+#define CH1_TEST				(0x1 << 1)
+#define CH0_TEST				(0x1 << 0)
+
+/* EXYNOS_DP_TRAINING_PTN_SET */
+#define SCRAMBLER_TYPE				(0x1 << 9)
+#define HW_LINK_TRAINING_PATTERN		(0x1 << 8)
+#define SCRAMBLING_DISABLE			(0x1 << 5)
+#define SCRAMBLING_ENABLE			(0x0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2		(0x1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE		(0x0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK		(0x3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2		(0x2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1		(0x1 << 0)
+#define SW_TRAINING_PATTERN_SET_NORMAL		(0x0 << 0)
+
+/* EXYNOS_DP_TOTAL_LINE_CFG */
+#define TOTAL_LINE_CFG_L(x)			((x) & 0xff)
+#define TOTAL_LINE_CFG_H(x)			((((x) >> 8)) & 0xff)
+#define ACTIVE_LINE_CFG_L(x)			((x) & 0xff)
+#define ACTIVE_LINE_CFG_H(x)			(((x) >> 8) & 0xff)
+#define TOTAL_PIXEL_CFG_L(x)			((x) & 0xff)
+#define TOTAL_PIXEL_CFG_H(x)			((((x) >> 8)) & 0xff)
+#define ACTIVE_PIXEL_CFG_L(x)			((x) & 0xff)
+#define ACTIVE_PIXEL_CFG_H(x)			((((x) >> 8)) & 0xff)
+
+#define H_F_PORCH_CFG_L(x)			((x) & 0xff)
+#define H_F_PORCH_CFG_H(x)			((((x) >> 8)) & 0xff)
+#define H_SYNC_PORCH_CFG_L(x)			((x) & 0xff)
+#define H_SYNC_PORCH_CFG_H(x)			((((x) >> 8)) & 0xff)
+#define H_B_PORCH_CFG_L(x)			((x) & 0xff)
+#define H_B_PORCH_CFG_H(x)			((((x) >> 8)) & 0xff)
+
+/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */
+#define MAX_PRE_EMPHASIS_REACH_0		(0x1 << 5)
+#define PRE_EMPHASIS_SET_0_SET(x)		(((x) & 0x3) << 3)
+#define PRE_EMPHASIS_SET_0_GET(x)		(((x) >> 3) & 0x3)
+#define PRE_EMPHASIS_SET_0_MASK			(0x3 << 3)
+#define PRE_EMPHASIS_SET_0_SHIFT		(3)
+#define PRE_EMPHASIS_SET_0_LEVEL_3		(0x3 << 3)
+#define PRE_EMPHASIS_SET_0_LEVEL_2		(0x2 << 3)
+#define PRE_EMPHASIS_SET_0_LEVEL_1		(0x1 << 3)
+#define PRE_EMPHASIS_SET_0_LEVEL_0		(0x0 << 3)
+#define MAX_DRIVE_CURRENT_REACH_0		(0x1 << 2)
+#define DRIVE_CURRENT_SET_0_MASK		(0x3 << 0)
+#define DRIVE_CURRENT_SET_0_SET(x)		(((x) & 0x3) << 0)
+#define DRIVE_CURRENT_SET_0_GET(x)		(((x) >> 0) & 0x3)
+#define DRIVE_CURRENT_SET_0_LEVEL_3		(0x3 << 0)
+#define DRIVE_CURRENT_SET_0_LEVEL_2		(0x2 << 0)
+#define DRIVE_CURRENT_SET_0_LEVEL_1		(0x1 << 0)
+#define DRIVE_CURRENT_SET_0_LEVEL_0		(0x0 << 0)
+
+/* EXYNOS_DP_LN1_LINK_TRAINING_CTL */
+#define MAX_PRE_EMPHASIS_REACH_1		(0x1 << 5)
+#define PRE_EMPHASIS_SET_1_SET(x)		(((x) & 0x3) << 3)
+#define PRE_EMPHASIS_SET_1_GET(x)		(((x) >> 3) & 0x3)
+#define PRE_EMPHASIS_SET_1_MASK			(0x3 << 3)
+#define PRE_EMPHASIS_SET_1_SHIFT		(3)
+#define PRE_EMPHASIS_SET_1_LEVEL_3		(0x3 << 3)
+#define PRE_EMPHASIS_SET_1_LEVEL_2		(0x2 << 3)
+#define PRE_EMPHASIS_SET_1_LEVEL_1		(0x1 << 3)
+#define PRE_EMPHASIS_SET_1_LEVEL_0		(0x0 << 3)
+#define MAX_DRIVE_CURRENT_REACH_1		(0x1 << 2)
+#define DRIVE_CURRENT_SET_1_MASK		(0x3 << 0)
+#define DRIVE_CURRENT_SET_1_SET(x)		(((x) & 0x3) << 0)
+#define DRIVE_CURRENT_SET_1_GET(x)		(((x) >> 0) & 0x3)
+#define DRIVE_CURRENT_SET_1_LEVEL_3		(0x3 << 0)
+#define DRIVE_CURRENT_SET_1_LEVEL_2		(0x2 << 0)
+#define DRIVE_CURRENT_SET_1_LEVEL_1		(0x1 << 0)
+#define DRIVE_CURRENT_SET_1_LEVEL_0		(0x0 << 0)
+
+/* EXYNOS_DP_LN2_LINK_TRAINING_CTL */
+#define MAX_PRE_EMPHASIS_REACH_2		(0x1 << 5)
+#define PRE_EMPHASIS_SET_2_SET(x)		(((x) & 0x3) << 3)
+#define PRE_EMPHASIS_SET_2_GET(x)		(((x) >> 3) & 0x3)
+#define PRE_EMPHASIS_SET_2_MASK			(0x3 << 3)
+#define PRE_EMPHASIS_SET_2_SHIFT		(3)
+#define PRE_EMPHASIS_SET_2_LEVEL_3		(0x3 << 3)
+#define PRE_EMPHASIS_SET_2_LEVEL_2		(0x2 << 3)
+#define PRE_EMPHASIS_SET_2_LEVEL_1		(0x1 << 3)
+#define PRE_EMPHASIS_SET_2_LEVEL_0		(0x0 << 3)
+#define MAX_DRIVE_CURRENT_REACH_2		(0x1 << 2)
+#define DRIVE_CURRENT_SET_2_MASK		(0x3 << 0)
+#define DRIVE_CURRENT_SET_2_SET(x)		(((x) & 0x3) << 0)
+#define DRIVE_CURRENT_SET_2_GET(x)		(((x) >> 0) & 0x3)
+#define DRIVE_CURRENT_SET_2_LEVEL_3		(0x3 << 0)
+#define DRIVE_CURRENT_SET_2_LEVEL_2		(0x2 << 0)
+#define DRIVE_CURRENT_SET_2_LEVEL_1		(0x1 << 0)
+#define DRIVE_CURRENT_SET_2_LEVEL_0		(0x0 << 0)
+
+/* EXYNOS_DP_LN3_LINK_TRAINING_CTL */
+#define MAX_PRE_EMPHASIS_REACH_3		(0x1 << 5)
+#define PRE_EMPHASIS_SET_3_SET(x)		(((x) & 0x3) << 3)
+#define PRE_EMPHASIS_SET_3_GET(x)		(((x) >> 3) & 0x3)
+#define PRE_EMPHASIS_SET_3_MASK			(0x3 << 3)
+#define PRE_EMPHASIS_SET_3_SHIFT		(3)
+#define PRE_EMPHASIS_SET_3_LEVEL_3		(0x3 << 3)
+#define PRE_EMPHASIS_SET_3_LEVEL_2		(0x2 << 3)
+#define PRE_EMPHASIS_SET_3_LEVEL_1		(0x1 << 3)
+#define PRE_EMPHASIS_SET_3_LEVEL_0		(0x0 << 3)
+#define MAX_DRIVE_CURRENT_REACH_3		(0x1 << 2)
+#define DRIVE_CURRENT_SET_3_MASK		(0x3 << 0)
+#define DRIVE_CURRENT_SET_3_SET(x)		(((x) & 0x3) << 0)
+#define DRIVE_CURRENT_SET_3_GET(x)		(((x) >> 0) & 0x3)
+#define DRIVE_CURRENT_SET_3_LEVEL_3		(0x3 << 0)
+#define DRIVE_CURRENT_SET_3_LEVEL_2		(0x2 << 0)
+#define DRIVE_CURRENT_SET_3_LEVEL_1		(0x1 << 0)
+#define DRIVE_CURRENT_SET_3_LEVEL_0		(0x0 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_10 */
+#define FORMAT_SEL				(0x1 << 4)
+#define INTERACE_SCAN_CFG			(0x1 << 2)
+#define INTERACE_SCAN_CFG_SHIFT			(2)
+#define VSYNC_POLARITY_CFG			(0x1 << 1)
+#define V_S_POLARITY_CFG_SHIFT			(1)
+#define HSYNC_POLARITY_CFG			(0x1 << 0)
+#define H_S_POLARITY_CFG_SHIFT			(0)
+
+/* EXYNOS_DP_SOC_GENERAL_CTL */
+#define AUDIO_MODE_SPDIF_MODE			(0x1 << 8)
+#define AUDIO_MODE_MASTER_MODE			(0x0 << 8)
+#define MASTER_VIDEO_INTERLACE_EN		(0x1 << 4)
+#define VIDEO_MASTER_CLK_SEL			(0x1 << 2)
+#define VIDEO_MASTER_MODE_EN			(0x1 << 1)
+#define VIDEO_MODE_MASK				(0x1 << 0)
+#define VIDEO_MODE_SLAVE_MODE			(0x1 << 0)
+#define VIDEO_MODE_MASTER_MODE			(0x0 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_1 */
+#define VIDEO_EN				(0x1 << 7)
+#define HDCP_VIDEO_MUTE				(0x1 << 6)
+
+/* EXYNOS_DP_VIDEO_CTL_2 */
+#define IN_D_RANGE_MASK				(0x1 << 7)
+#define IN_D_RANGE_SHIFT			(7)
+#define IN_D_RANGE_CEA				(0x1 << 7)
+#define IN_D_RANGE_VESA				(0x0 << 7)
+#define IN_BPC_MASK				(0x7 << 4)
+#define IN_BPC_SHIFT				(4)
+#define IN_BPC_12_BITS				(0x3 << 4)
+#define IN_BPC_10_BITS				(0x2 << 4)
+#define IN_BPC_8_BITS				(0x1 << 4)
+#define IN_BPC_6_BITS				(0x0 << 4)
+#define IN_COLOR_F_MASK				(0x3 << 0)
+#define IN_COLOR_F_SHIFT			(0)
+#define IN_COLOR_F_YCBCR444			(0x2 << 0)
+#define IN_COLOR_F_YCBCR422			(0x1 << 0)
+#define IN_COLOR_F_RGB				(0x0 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_3 */
+#define IN_YC_COEFFI_MASK			(0x1 << 7)
+#define IN_YC_COEFFI_SHIFT			(7)
+#define IN_YC_COEFFI_ITU709			(0x1 << 7)
+#define IN_YC_COEFFI_ITU601			(0x0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK		(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT		(4)
+#define VID_CHK_UPDATE_TYPE_1			(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_0			(0x0 << 4)
+
+/* EXYNOS_DP_TEST_PATTERN_GEN_EN */
+#define TEST_PATTERN_GEN_EN			(0x1 << 0)
+#define TEST_PATTERN_GEN_DIS			(0x0 << 0)
+
+/* EXYNOS_DP_TEST_PATTERN_GEN_CTRL */
+#define TEST_PATTERN_MODE_COLOR_SQUARE		(0x3 << 0)
+#define TEST_PATTERN_MODE_BALCK_WHITE_V_LINES	(0x2 << 0)
+#define TEST_PATTERN_MODE_COLOR_RAMP		(0x1 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_4 */
+#define BIST_EN					(0x1 << 3)
+#define BIST_WIDTH_MASK				(0x1 << 2)
+#define BIST_WIDTH_BAR_32_PIXEL			(0x0 << 2)
+#define BIST_WIDTH_BAR_64_PIXEL			(0x1 << 2)
+#define BIST_TYPE_MASK				(0x3 << 0)
+#define BIST_TYPE_COLOR_BAR			(0x0 << 0)
+#define BIST_TYPE_WHITE_GRAY_BLACK_BAR		(0x1 << 0)
+#define BIST_TYPE_MOBILE_WHITE_BAR		(0x2 << 0)
+
+/* EXYNOS_DP_SYS_CTL_1 */
+#define DET_STA					(0x1 << 2)
+#define FORCE_DET				(0x1 << 1)
+#define DET_CTRL				(0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_2 */
+#define CHA_CRI(x)				(((x) & 0xf) << 4)
+#define CHA_STA					(0x1 << 2)
+#define FORCE_CHA				(0x1 << 1)
+#define CHA_CTRL				(0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_3 */
+#define HPD_STATUS				(0x1 << 6)
+#define F_HPD					(0x1 << 5)
+#define HPD_CTRL				(0x1 << 4)
+#define HDCP_RDY				(0x1 << 3)
+#define STRM_VALID				(0x1 << 2)
+#define F_VALID					(0x1 << 1)
+#define VALID_CTRL				(0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_4 */
+#define FIX_M_AUD				(0x1 << 4)
+#define ENHANCED				(0x1 << 3)
+#define FIX_M_VID				(0x1 << 2)
+#define M_VID_UPDATE_CTRL			(0x3 << 0)
+
+/* EXYNOS_M_VID_X */
+#define M_VID0_CFG(x)				((x) & 0xff)
+#define M_VID1_CFG(x)				(((x) >> 8) & 0xff)
+#define M_VID2_CFG(x)				(((x) >> 16) & 0xff)
+
+/* EXYNOS_M_VID_X */
+#define N_VID0_CFG(x)				((x) & 0xff)
+#define N_VID1_CFG(x)				(((x) >> 8) & 0xff)
+#define N_VID2_CFG(x)				(((x) >> 16) & 0xff)
+
+/* DPCD_TRAINING_PATTERN_SET */
+#define DPCD_SCRAMBLING_DISABLED		(0x1 << 5)
+#define DPCD_SCRAMBLING_ENABLED			(0x0 << 5)
+#define DPCD_TRAINING_PATTERN_2			(0x2 << 0)
+#define DPCD_TRAINING_PATTERN_1			(0x1 << 0)
+#define DPCD_TRAINING_PATTERN_DISABLED		(0x0 << 0)
+
+/* Definition for DPCD Register */
+#define DPCD_DPCD_REV				(0x0000)
+#define DPCD_MAX_LINK_RATE			(0x0001)
+#define DPCD_MAX_LANE_COUNT			(0x0002)
+#define DPCD_LINK_BW_SET			(0x0100)
+#define DPCD_LANE_COUNT_SET			(0x0101)
+#define DPCD_TRAINING_PATTERN_SET		(0x0102)
+#define DPCD_TRAINING_LANE0_SET			(0x0103)
+#define DPCD_LANE0_1_STATUS			(0x0202)
+#define DPCD_LN_ALIGN_UPDATED			(0x0204)
+#define DPCD_ADJUST_REQUEST_LANE0_1		(0x0206)
+#define DPCD_ADJUST_REQUEST_LANE2_3		(0x0207)
+#define DPCD_TEST_REQUEST			(0x0218)
+#define DPCD_TEST_RESPONSE			(0x0260)
+#define DPCD_TEST_EDID_CHECKSUM			(0x0261)
+#define DPCD_SINK_POWER_STATE			(0x0600)
+
+/* DPCD_TEST_REQUEST */
+#define DPCD_TEST_EDID_READ			(0x1 << 2)
+
+/* DPCD_TEST_RESPONSE */
+#define DPCD_TEST_EDID_CHECKSUM_WRITE		(0x1 << 2)
+
+/* DPCD_SINK_POWER_STATE */
+#define DPCD_SET_POWER_STATE_D0			(0x1 << 0)
+#define DPCD_SET_POWER_STATE_D4			(0x2 << 0)
+
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR			(0x50)
+#define I2C_E_EDID_DEVICE_ADDR			(0x30)
+#define EDID_BLOCK_LENGTH			(0x80)
+#define EDID_HEADER_PATTERN			(0x00)
+#define EDID_EXTENSION_FLAG			(0x7e)
+#define EDID_CHECKSUM				(0x7f)
+
+/* DPCD_LANE0_1_STATUS */
+#define DPCD_LANE1_SYMBOL_LOCKED		(0x1 << 6)
+#define DPCD_LANE1_CHANNEL_EQ_DONE		(0x1 << 5)
+#define DPCD_LANE1_CR_DONE			(0x1 << 4)
+#define DPCD_LANE0_SYMBOL_LOCKED		(0x1 << 2)
+#define DPCD_LANE0_CHANNEL_EQ_DONE		(0x1 << 1)
+#define DPCD_LANE0_CR_DONE			(0x1 << 0)
+
+/* DPCD_ADJUST_REQUEST_LANE0_1 */
+#define DPCD_PRE_EMPHASIS_LANE1_MASK		(0x3 << 6)
+#define DPCD_PRE_EMPHASIS_LANE1(x)		(((x) >> 6) & 0x3)
+#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_3		(0x3 << 6)
+#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_2		(0x2 << 6)
+#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_1		(0x1 << 6)
+#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_0		(0x0 << 6)
+#define DPCD_VOLTAGE_SWING_LANE1_MASK		(0x3 << 4)
+#define DPCD_VOLTAGE_SWING_LANE1(x)		(((x) >> 4) & 0x3)
+#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_3	(0x3 << 4)
+#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_2	(0x2 << 4)
+#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_1	(0x1 << 4)
+#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_0	(0x0 << 4)
+#define DPCD_PRE_EMPHASIS_LANE0_MASK		(0x3 << 2)
+#define DPCD_PRE_EMPHASIS_LANE0(x)		(((x) >> 2) & 0x3)
+#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_3		(0x3 << 2)
+#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_2		(0x2 << 2)
+#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_1		(0x1 << 2)
+#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_0		(0x0 << 2)
+#define DPCD_VOLTAGE_SWING_LANE0_MASK		(0x3 << 0)
+#define DPCD_VOLTAGE_SWING_LANE0(x)		(((x) >> 0) & 0x3)
+#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_3	(0x3 << 0)
+#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_2	(0x2 << 0)
+#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_1	(0x1 << 0)
+#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_0	(0x0 << 0)
+
+/* DPCD_ADJUST_REQUEST_LANE2_3 */
+#define DPCD_PRE_EMPHASIS_LANE2_MASK		(0x3 << 6)
+#define DPCD_PRE_EMPHASIS_LANE2(x)		(((x) >> 6) & 0x3)
+#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_3		(0x3 << 6)
+#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_2		(0x2 << 6)
+#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_1		(0x1 << 6)
+#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_0		(0x0 << 6)
+#define DPCD_VOLTAGE_SWING_LANE2_MASK		(0x3 << 4)
+#define DPCD_VOLTAGE_SWING_LANE2(x)		(((x) >> 4) & 0x3)
+#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_3	(0x3 << 4)
+#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_2	(0x2 << 4)
+#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_1	(0x1 << 4)
+#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_0	(0x0 << 4)
+#define DPCD_PRE_EMPHASIS_LANE3_MASK		(0x3 << 2)
+#define DPCD_PRE_EMPHASIS_LANE3(x)		(((x) >> 2) & 0x3)
+#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_3		(0x3 << 2)
+#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_2		(0x2 << 2)
+#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_1		(0x1 << 2)
+#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_0		(0x0 << 2)
+#define DPCD_VOLTAGE_SWING_LANE3_MASK		(0x3 << 0)
+#define DPCD_VOLTAGE_SWING_LANE3(x)		(((x) >> 0) & 0x3)
+#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_3	(0x3 << 0)
+#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_2	(0x2 << 0)
+#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_1	(0x1 << 0)
+#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_0	(0x0 << 0)
+
+/* DPCD_LANE_COUNT_SET */
+#define DPCD_ENHANCED_FRAME_EN			(0x1 << 7)
+#define DPCD_LN_COUNT_SET(x)			((x) & 0x1f)
+
+/* DPCD_LANE_ALIGN__STATUS_UPDATED */
+#define DPCD_LINK_STATUS_UPDATED		(0x1 << 7)
+#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED	(0x1 << 6)
+#define DPCD_INTERLANE_ALIGN_DONE		(0x1 << 0)
+
+/* DPCD_TRAINING_LANE0_SET */
+#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_3		(0x3 << 3)
+#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_2		(0x2 << 3)
+#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_1		(0x1 << 3)
+#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0		(0x0 << 3)
+#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_3	(0x3 << 0)
+#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_2	(0x2 << 0)
+#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_1	(0x1 << 0)
+#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0	(0x0 << 0)
+
+#define DPCD_REQ_ADJ_SWING			(0x00)
+#define DPCD_REQ_ADJ_EMPHASIS			(0x01)
+
+#define DP_LANE_STAT_CR_DONE			(0x01 << 0)
+#define DP_LANE_STAT_CE_DONE			(0x01 << 1)
+#define DP_LANE_STAT_SYM_LOCK			(0x01 << 2)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/dp_info.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/dp_info.h
new file mode 100644
index 000000000..3226eb95f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/dp_info.h
@@ -0,0 +1,201 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#ifndef _DP_INFO_H
+#define _DP_INFO_H
+
+#define msleep(a)			udelay(a * 1000)
+
+#define DP_TIMEOUT_LOOP_COUNT		100
+#define MAX_CR_LOOP			5
+#define MAX_EQ_LOOP			4
+
+#define EXYNOS_DP_SUCCESS		0
+
+enum {
+	DP_DISABLE,
+	DP_ENABLE,
+};
+
+struct edp_disp_info {
+	char *name;
+	unsigned int h_total;
+	unsigned int h_res;
+	unsigned int h_sync_width;
+	unsigned int h_back_porch;
+	unsigned int h_front_porch;
+	unsigned int v_total;
+	unsigned int v_res;
+	unsigned int v_sync_width;
+	unsigned int v_back_porch;
+	unsigned int v_front_porch;
+
+	unsigned int v_sync_rate;
+};
+
+struct edp_link_train_info {
+	unsigned int lt_status;
+
+	unsigned int ep_loop;
+	unsigned int cr_loop[4];
+
+};
+
+struct edp_video_info {
+	unsigned int master_mode;
+	unsigned int bist_mode;
+	unsigned int bist_pattern;
+
+	unsigned int h_sync_polarity;
+	unsigned int v_sync_polarity;
+	unsigned int interlaced;
+
+	unsigned int color_space;
+	unsigned int dynamic_range;
+	unsigned int ycbcr_coeff;
+	unsigned int color_depth;
+};
+
+struct exynos_dp_priv {
+	struct edp_disp_info disp_info;
+	struct edp_link_train_info lt_info;
+	struct edp_video_info video_info;
+
+	/*below info get from panel during training*/
+	unsigned char lane_bw;
+	unsigned char lane_cnt;
+	unsigned char dpcd_rev;
+	/*support enhanced frame cap */
+	unsigned char dpcd_efc;
+	struct exynos_dp *regs;
+};
+
+enum analog_power_block {
+	AUX_BLOCK,
+	CH0_BLOCK,
+	CH1_BLOCK,
+	CH2_BLOCK,
+	CH3_BLOCK,
+	ANALOG_TOTAL,
+	POWER_ALL
+};
+
+enum pll_status {
+	PLL_UNLOCKED = 0,
+	PLL_LOCKED
+};
+
+enum {
+	COLOR_RGB,
+	COLOR_YCBCR422,
+	COLOR_YCBCR444
+};
+
+enum {
+	VESA,
+	CEA
+};
+
+enum {
+	COLOR_YCBCR601,
+	COLOR_YCBCR709
+};
+
+enum {
+	COLOR_6,
+	COLOR_8,
+	COLOR_10,
+	COLOR_12
+};
+
+enum {
+	DP_LANE_BW_1_62 = 0x06,
+	DP_LANE_BW_2_70 = 0x0a,
+};
+
+enum {
+	DP_LANE_CNT_1 = 1,
+	DP_LANE_CNT_2 = 2,
+	DP_LANE_CNT_4 = 4,
+};
+
+enum {
+	DP_DPCD_REV_10 = 0x10,
+	DP_DPCD_REV_11 = 0x11,
+};
+
+enum {
+	DP_LT_NONE,
+	DP_LT_START,
+	DP_LT_CR,
+	DP_LT_ET,
+	DP_LT_FINISHED,
+	DP_LT_FAIL,
+};
+
+enum  {
+	PRE_EMPHASIS_LEVEL_0,
+	PRE_EMPHASIS_LEVEL_1,
+	PRE_EMPHASIS_LEVEL_2,
+	PRE_EMPHASIS_LEVEL_3,
+};
+
+enum {
+	PRBS7,
+	D10_2,
+	TRAINING_PTN1,
+	TRAINING_PTN2,
+	DP_NONE
+};
+
+enum {
+	VOLTAGE_LEVEL_0,
+	VOLTAGE_LEVEL_1,
+	VOLTAGE_LEVEL_2,
+	VOLTAGE_LEVEL_3,
+};
+
+enum pattern_type {
+	NO_PATTERN,
+	COLOR_RAMP,
+	BALCK_WHITE_V_LINES,
+	COLOR_SQUARE,
+	INVALID_PATTERN,
+	COLORBAR_32,
+	COLORBAR_64,
+	WHITE_GRAY_BALCKBAR_32,
+	WHITE_GRAY_BALCKBAR_64,
+	MOBILE_WHITEBAR_32,
+	MOBILE_WHITEBAR_64
+};
+
+enum {
+	CALCULATED_M,
+	REGISTER_M
+};
+
+enum {
+	VIDEO_TIMING_FROM_CAPTURE,
+	VIDEO_TIMING_FROM_REGISTER
+};
+
+
+struct exynos_dp_platform_data {
+	struct exynos_dp_priv *edp_dev_info;
+};
+
+#ifdef CONFIG_EXYNOS_DP
+unsigned int exynos_init_dp(void);
+#else
+unsigned int exynos_init_dp(void)
+{
+	return 0;
+}
+#endif
+
+#include <linux/delay.h>
+#endif /* _DP_INFO_H */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/dsim.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/dsim.h
new file mode 100644
index 000000000..15671b603
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/dsim.h
@@ -0,0 +1,167 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_DSIM_H_
+#define __ASM_ARM_ARCH_DSIM_H_
+
+#ifndef __ASSEMBLY__
+
+struct exynos_mipi_dsim {
+	unsigned int	status;
+	unsigned int	swrst;
+	unsigned int	clkctrl;
+	unsigned int	timeout;
+	unsigned int	config;
+	unsigned int	escmode;
+	unsigned int	mdresol;
+	unsigned int	mvporch;
+	unsigned int	mhporch;
+	unsigned int	msync;
+	unsigned int	sdresol;
+	unsigned int	intsrc;
+	unsigned int	intmsk;
+	unsigned int	pkthdr;
+	unsigned int	payload;
+	unsigned int	rxfifo;
+	unsigned int	fifothld;
+	unsigned int	fifoctrl;
+	unsigned int	memacchr;
+	unsigned int	pllctrl;
+	unsigned int	plltmr;
+	unsigned int	phyacchr;
+	unsigned int	phyacchr1;
+};
+
+#endif	/* __ASSEMBLY__ */
+
+/*
+ * Bit Definitions
+ */
+/* DSIM_STATUS */
+#define DSIM_STOP_STATE_DAT(x)	(((x) & 0xf) << 0)
+#define DSIM_STOP_STATE_CLK	(1 << 8)
+#define DSIM_TX_READY_HS_CLK	(1 << 10)
+#define DSIM_PLL_STABLE		(1 << 31)
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST		(1 << 16)
+#define DSIM_SWRST		(1 << 0)
+
+/* EXYNOS_DSIM_TIMEOUT */
+#define DSIM_LPDR_TOUT_SHIFT	(0)
+#define DSIM_BTA_TOUT_SHIFT	(16)
+
+/* EXYNOS_DSIM_CLKCTRL */
+#define DSIM_LANE_ESC_CLKEN_SHIFT	(19)
+#define DSIM_BYTE_CLKEN_SHIFT		(24)
+#define DSIM_BYTE_CLK_SRC_SHIFT		(25)
+#define DSIM_PLL_BYPASS_SHIFT		(27)
+#define DSIM_ESC_CLKEN_SHIFT		(28)
+#define DSIM_TX_REQUEST_HSCLK_SHIFT	(31)
+#define DSIM_LANE_ESC_CLKEN(x)		(((x) & 0x1f) << \
+						DSIM_LANE_ESC_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_ENABLE		(1 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_DISABLE		(0 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_PLL_BYPASS_EXTERNAL	(1 << DSIM_PLL_BYPASS_SHIFT)
+#define DSIM_ESC_CLKEN_ENABLE		(1 << DSIM_ESC_CLKEN_SHIFT)
+#define DSIM_ESC_CLKEN_DISABLE		(0 << DSIM_ESC_CLKEN_SHIFT)
+
+/* EXYNOS_DSIM_CONFIG */
+#define DSIM_NUM_OF_DATALANE_SHIFT	(5)
+#define DSIM_SUBPIX_SHIFT		(8)
+#define DSIM_MAINPIX_SHIFT		(12)
+#define DSIM_SUBVC_SHIFT		(16)
+#define DSIM_MAINVC_SHIFT		(18)
+#define DSIM_HSA_MODE_SHIFT		(20)
+#define DSIM_HBP_MODE_SHIFT		(21)
+#define DSIM_HFP_MODE_SHIFT		(22)
+#define DSIM_HSE_MODE_SHIFT		(23)
+#define DSIM_AUTO_MODE_SHIFT		(24)
+#define DSIM_VIDEO_MODE_SHIFT		(25)
+#define DSIM_BURST_MODE_SHIFT		(26)
+#define DSIM_EOT_PACKET_SHIFT		(28)
+#define DSIM_AUTO_FLUSH_SHIFT		(29)
+#define DSIM_LANE_ENx(x)		(((x) & 0x1f) << 0)
+
+#define DSIM_NUM_OF_DATA_LANE(x)	((x) << DSIM_NUM_OF_DATALANE_SHIFT)
+
+/* EXYNOS_DSIM_ESCMODE */
+#define DSIM_TX_LPDT_SHIFT		(6)
+#define DSIM_CMD_LPDT_SHIFT		(7)
+#define DSIM_TX_LPDT_LP			(1 << DSIM_TX_LPDT_SHIFT)
+#define DSIM_CMD_LPDT_LP		(1 << DSIM_CMD_LPDT_SHIFT)
+#define DSIM_STOP_STATE_CNT_SHIFT	(21)
+#define DSIM_FORCE_STOP_STATE_SHIFT	(20)
+
+/* EXYNOS_DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY		(1 << 31)
+#define DSIM_MAIN_VRESOL(x)		(((x) & 0x7ff) << 16)
+#define DSIM_MAIN_HRESOL(x)		(((x) & 0X7ff) << 0)
+
+/* EXYNOS_DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW_SHIFT		(28)
+#define DSIM_STABLE_VFP_SHIFT		(16)
+#define DSIM_MAIN_VBP_SHIFT		(0)
+#define DSIM_CMD_ALLOW_MASK		(0xf << DSIM_CMD_ALLOW_SHIFT)
+#define DSIM_STABLE_VFP_MASK		(0x7ff << DSIM_STABLE_VFP_SHIFT)
+#define DSIM_MAIN_VBP_MASK		(0x7ff << DSIM_MAIN_VBP_SHIFT)
+
+/* EXYNOS_DSIM_MHPORCH */
+#define DSIM_MAIN_HFP_SHIFT		(16)
+#define DSIM_MAIN_HBP_SHIFT		(0)
+#define DSIM_MAIN_HFP_MASK		((0xffff) << DSIM_MAIN_HFP_SHIFT)
+#define DSIM_MAIN_HBP_MASK		((0xffff) << DSIM_MAIN_HBP_SHIFT)
+
+/* EXYNOS_DSIM_MSYNC */
+#define DSIM_MAIN_VSA_SHIFT		(22)
+#define DSIM_MAIN_HSA_SHIFT		(0)
+#define DSIM_MAIN_VSA_MASK		((0x3ff) << DSIM_MAIN_VSA_SHIFT)
+#define DSIM_MAIN_HSA_MASK		((0xffff) << DSIM_MAIN_HSA_SHIFT)
+
+/* EXYNOS_DSIM_SDRESOL */
+#define DSIM_SUB_STANDY_SHIFT		(31)
+#define DSIM_SUB_VRESOL_SHIFT		(16)
+#define DSIM_SUB_HRESOL_SHIFT		(0)
+#define DSIM_SUB_STANDY_MASK		((0x1) << DSIM_SUB_STANDY_SHIFT)
+#define DSIM_SUB_VRESOL_MASK		((0x7ff) << DSIM_SUB_VRESOL_SHIFT)
+#define DSIM_SUB_HRESOL_MASK		((0x7ff) << DSIM_SUB_HRESOL_SHIFT)
+
+/* EXYNOS_DSIM_INTSRC */
+#define INTSRC_FRAME_DONE		(1 << 24)
+#define INTSRC_PLL_STABLE		(1 << 31)
+#define INTSRC_SWRST_RELEASE		(1 << 30)
+
+/* EXYNOS_DSIM_INTMSK */
+#define INTMSK_FRAME_DONE		(1 << 24)
+
+/* EXYNOS_DSIM_FIFOCTRL */
+#define SFR_HEADER_EMPTY		(1 << 22)
+
+/* EXYNOS_DSIM_PKTHDR */
+#define DSIM_PKTHDR_DI(x)		(((x) & 0x3f) << 0)
+#define DSIM_PKTHDR_DAT0(x)		((x) << 8)
+#define DSIM_PKTHDR_DAT1(x)		((x) << 16)
+
+/* EXYNOS_DSIM_PHYACCHR */
+#define DSIM_AFC_CTL(x)			(((x) & 0x7) << 5)
+#define DSIM_AFC_CTL_SHIFT		(5)
+#define DSIM_AFC_EN			(1 << 14)
+
+/* EXYNOS_DSIM_PHYACCHR1 */
+#define DSIM_DPDN_SWAP_DATA_SHIFT	(0)
+
+/* EXYNOS_DSIM_PLLCTRL */
+#define DSIM_SCALER_SHIFT		(1)
+#define DSIM_MAIN_SHIFT			(4)
+#define DSIM_PREDIV_SHIFT		(13)
+#define DSIM_PRECTRL_SHIFT		(20)
+#define DSIM_PLL_EN_SHIFT		(23)
+#define DSIM_FREQ_BAND_SHIFT		(24)
+#define DSIM_ZEROCTRL_SHIFT		(28)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/dwmmc.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/dwmmc.h
new file mode 100644
index 000000000..59c28ed54
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/dwmmc.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ */
+
+#define DWMCI_CLKSEL		0x09C
+#define DWMCI_SET_SAMPLE_CLK(x)	(x)
+#define DWMCI_SET_DRV_CLK(x)	((x) << 16)
+#define DWMCI_SET_DIV_RATIO(x)	((x) << 24)
+
+#define EMMCP_MPSBEGIN0		0x1200
+#define EMMCP_SEND0		0x1204
+#define EMMCP_CTRL0		0x120C
+
+#define MPSCTRL_SECURE_READ_BIT		(0x1<<7)
+#define MPSCTRL_SECURE_WRITE_BIT	(0x1<<6)
+#define MPSCTRL_NON_SECURE_READ_BIT	(0x1<<5)
+#define MPSCTRL_NON_SECURE_WRITE_BIT	(0x1<<4)
+#define MPSCTRL_USE_FUSE_KEY		(0x1<<3)
+#define MPSCTRL_ECB_MODE		(0x1<<2)
+#define MPSCTRL_ENCRYPTION		(0x1<<1)
+#define MPSCTRL_VALID			(0x1<<0)
+
+/* CLKSEL Register */
+#define DWMCI_DIVRATIO_BIT		24
+#define DWMCI_DIVRATIO_MASK		0x7
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/ehci.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/ehci.h
new file mode 100644
index 000000000..e818228bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/ehci.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SAMSUNG EXYNOS USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *	Vivek Gautam <gautam.vivek@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_EHCI_H__
+#define __ASM_ARM_ARCH_EHCI_H__
+
+#define CLK_24MHZ		5
+
+#define PHYPWR_NORMAL_MASK_PHY0                 (0x39 << 0)
+#define PHYPWR_NORMAL_MASK_PHY1                 (0x7 << 6)
+#define PHYPWR_NORMAL_MASK_HSIC0                (0x7 << 9)
+#define PHYPWR_NORMAL_MASK_HSIC1                (0x7 << 12)
+#define RSTCON_HOSTPHY_SWRST                    (0xf << 3)
+#define RSTCON_SWRST                            (0x1 << 0)
+
+#define HOST_CTRL0_PHYSWRSTALL			(1 << 31)
+#define HOST_CTRL0_COMMONON_N			(1 << 9)
+#define HOST_CTRL0_SIDDQ			(1 << 6)
+#define HOST_CTRL0_FORCESLEEP			(1 << 5)
+#define HOST_CTRL0_FORCESUSPEND			(1 << 4)
+#define HOST_CTRL0_WORDINTERFACE		(1 << 3)
+#define HOST_CTRL0_UTMISWRST			(1 << 2)
+#define HOST_CTRL0_LINKSWRST			(1 << 1)
+#define HOST_CTRL0_PHYSWRST			(1 << 0)
+
+#define HOST_CTRL0_FSEL_MASK			(7 << 16)
+
+#define EHCICTRL_ENAINCRXALIGN			(1 << 29)
+#define EHCICTRL_ENAINCR4			(1 << 28)
+#define EHCICTRL_ENAINCR8			(1 << 27)
+#define EHCICTRL_ENAINCR16			(1 << 26)
+
+#define HSIC_CTRL_REFCLKSEL                     (0x2)
+#define HSIC_CTRL_REFCLKSEL_MASK                (0x3)
+#define HSIC_CTRL_REFCLKSEL_SHIFT               (23)
+
+#define HSIC_CTRL_REFCLKDIV_12                  (0x24)
+#define HSIC_CTRL_REFCLKDIV_MASK                (0x7f)
+#define HSIC_CTRL_REFCLKDIV_SHIFT               (16)
+
+#define HSIC_CTRL_SIDDQ                         (0x1 << 6)
+#define HSIC_CTRL_FORCESLEEP                    (0x1 << 5)
+#define HSIC_CTRL_FORCESUSPEND                  (0x1 << 4)
+#define HSIC_CTRL_UTMISWRST                     (0x1 << 2)
+#define HSIC_CTRL_PHYSWRST                      (0x1 << 0)
+
+/* Register map for PHY control */
+struct exynos_usb_phy {
+	unsigned int usbphyctrl0;
+	unsigned int usbphytune0;
+	unsigned int reserved1[2];
+	unsigned int hsicphyctrl1;
+	unsigned int hsicphytune1;
+	unsigned int reserved2[2];
+	unsigned int hsicphyctrl2;
+	unsigned int hsicphytune2;
+	unsigned int reserved3[2];
+	unsigned int ehcictrl;
+	unsigned int ohcictrl;
+	unsigned int usbotgsys;
+	unsigned int reserved4;
+	unsigned int usbotgtune;
+};
+
+struct exynos4412_usb_phy {
+	unsigned int usbphyctrl;
+	unsigned int usbphyclk;
+	unsigned int usbphyrstcon;
+};
+
+/* Switch on the VBUS power. */
+int board_usb_vbus_init(void);
+
+#endif /* __ASM_ARM_ARCH_EHCI_H__ */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/fb.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/fb.h
new file mode 100644
index 000000000..09be67b79
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/fb.h
@@ -0,0 +1,456 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ * Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_FB_H_
+#define __ASM_ARM_ARCH_FB_H_
+
+#ifndef __ASSEMBLY__
+struct exynos_fb {
+	unsigned int vidcon0;
+	unsigned int vidcon1;
+	unsigned int vidcon2;
+	unsigned int vidcon3;
+	unsigned int vidtcon0;
+	unsigned int vidtcon1;
+	unsigned int vidtcon2;
+	unsigned int vidtcon3;
+	unsigned int wincon0;
+	unsigned int wincon1;
+	unsigned int wincon2;
+	unsigned int wincon3;
+	unsigned int wincon4;
+
+	unsigned int winshmap;
+	unsigned int res1;
+
+	unsigned int winchmap2;
+	unsigned int vidosd0a;
+	unsigned int vidosd0b;
+	unsigned int vidosd0c;
+	unsigned int res2;
+
+	unsigned int vidosd1a;
+	unsigned int vidosd1b;
+	unsigned int vidosd1c;
+	unsigned int vidosd1d;
+
+	unsigned int vidosd2a;
+	unsigned int vidosd2b;
+	unsigned int vidosd2c;
+	unsigned int vidosd2d;
+
+	unsigned int vidosd3a;
+	unsigned int vidosd3b;
+	unsigned int vidosd3c;
+	unsigned int res3;
+
+	unsigned int vidosd4a;
+	unsigned int vidosd4b;
+	unsigned int vidosd4c;
+	unsigned int res4[5];
+
+	unsigned int vidw00add0b0;
+	unsigned int vidw00add0b1;
+	unsigned int vidw01add0b0;
+	unsigned int vidw01add0b1;
+
+	unsigned int vidw02add0b0;
+	unsigned int vidw02add0b1;
+	unsigned int vidw03add0b0;
+	unsigned int vidw03add0b1;
+	unsigned int vidw04add0b0;
+	unsigned int vidw04add0b1;
+	unsigned int res5[2];
+
+	unsigned int vidw00add1b0;
+	unsigned int vidw00add1b1;
+	unsigned int vidw01add1b0;
+	unsigned int vidw01add1b1;
+
+	unsigned int vidw02add1b0;
+	unsigned int vidw02add1b1;
+	unsigned int vidw03add1b0;
+	unsigned int vidw03add1b1;
+
+	unsigned int vidw04add1b0;
+	unsigned int vidw04add1b1;
+	unsigned int res7[2];
+
+	unsigned int vidw00add2;
+	unsigned int vidw01add2;
+	unsigned int vidw02add2;
+	unsigned int vidw03add2;
+	unsigned int vidw04add2;
+	unsigned int res8[7];
+
+	unsigned int vidintcon0;
+	unsigned int vidintcon1;
+	unsigned int res9[1];
+
+	unsigned int w1keycon0;
+	unsigned int w1keycon1;
+	unsigned int w2keycon0;
+	unsigned int w2keycon1;
+	unsigned int w3keycon0;
+	unsigned int w3keycon1;
+	unsigned int w4keycon0;
+	unsigned int w4keycon1;
+
+	unsigned int w1keyalpha;
+	unsigned int w2keyalpha;
+	unsigned int w3keyalpha;
+	unsigned int w4keyalpha;
+
+	unsigned int dithmode;
+	unsigned int res10[2];
+
+	unsigned int win0map;
+	unsigned int win1map;
+	unsigned int win2map;
+	unsigned int win3map;
+	unsigned int win4map;
+	unsigned int res11[1];
+
+	unsigned int wpalcon_h;
+	unsigned int wpalcon_l;
+
+	unsigned int trigcon;
+	unsigned int res12[2];
+
+	unsigned int i80ifcona0;
+	unsigned int i80ifcona1;
+	unsigned int i80ifconb0;
+	unsigned int i80ifconb1;
+
+	unsigned int colorgaincon;
+	unsigned int res13[2];
+
+	unsigned int ldi_cmdcon0;
+	unsigned int ldi_cmdcon1;
+	unsigned int res14[1];
+
+	/* To be updated */
+
+	unsigned char res15[156];
+	unsigned int dualrgb;
+	unsigned char res16[16];
+	unsigned int dp_mie_clkcon;
+};
+#endif
+
+/* LCD IF register offset */
+#define EXYNOS4_LCD_IF_BASE_OFFSET			0x0
+#define EXYNOS5_LCD_IF_BASE_OFFSET			0x20000
+
+static inline unsigned int exynos_fimd_get_base_offset(void)
+{
+	if (cpu_is_exynos5())
+		return EXYNOS5_LCD_IF_BASE_OFFSET;
+	else
+		return EXYNOS4_LCD_IF_BASE_OFFSET;
+}
+
+/*
+ *  Register offsets
+*/
+#define EXYNOS_WINCON(x)				(x * 0x04)
+#define EXYNOS_VIDOSD(x)				(x * 0x10)
+#define EXYNOS_BUFFER_OFFSET(x)				(x * 0x08)
+#define EXYNOS_BUFFER_SIZE(x)				(x * 0x04)
+
+/*
+ * Bit Definitions
+*/
+
+/* VIDCON0 */
+#define EXYNOS_VIDCON0_DSI_DISABLE			(0 << 30)
+#define EXYNOS_VIDCON0_DSI_ENABLE			(1 << 30)
+#define EXYNOS_VIDCON0_SCAN_PROGRESSIVE			(0 << 29)
+#define EXYNOS_VIDCON0_SCAN_INTERLACE			(1 << 29)
+#define EXYNOS_VIDCON0_SCAN_MASK			(1 << 29)
+#define EXYNOS_VIDCON0_VIDOUT_RGB			(0 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_ITU			(1 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_I80LDI0			(2 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_I80LDI1			(3 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_WB_RGB			(4 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_WB_I80LDI0		(6 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_WB_I80LDI1		(7 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_MASK			(7 << 26)
+#define EXYNOS_VIDCON0_PNRMODE_RGB_P			(0 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_BGR_P			(1 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_RGB_S			(2 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_BGR_S			(3 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_MASK			(3 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_SHIFT			(17)
+#define EXYNOS_VIDCON0_CLKVALUP_ALWAYS			(0 << 16)
+#define EXYNOS_VIDCON0_CLKVALUP_START_FRAME		(1 << 16)
+#define EXYNOS_VIDCON0_CLKVALUP_MASK			(1 << 16)
+#define EXYNOS_VIDCON0_CLKVAL_F(x)			(((x) & 0xff) << 6)
+#define EXYNOS_VIDCON0_VCLKEN_NORMAL			(0 << 5)
+#define EXYNOS_VIDCON0_VCLKEN_FREERUN			(1 << 5)
+#define EXYNOS_VIDCON0_VCLKEN_MASK			(1 << 5)
+#define EXYNOS_VIDCON0_CLKDIR_DIRECTED			(0 << 4)
+#define EXYNOS_VIDCON0_CLKDIR_DIVIDED			(1 << 4)
+#define EXYNOS_VIDCON0_CLKDIR_MASK			(1 << 4)
+#define EXYNOS_VIDCON0_CLKSEL_HCLK			(0 << 2)
+#define EXYNOS_VIDCON0_CLKSEL_SCLK			(1 << 2)
+#define EXYNOS_VIDCON0_CLKSEL_MASK			(1 << 2)
+#define EXYNOS_VIDCON0_ENVID_ENABLE			(1 << 1)
+#define EXYNOS_VIDCON0_ENVID_DISABLE			(0 << 1)
+#define EXYNOS_VIDCON0_ENVID_F_ENABLE			(1 << 0)
+#define EXYNOS_VIDCON0_ENVID_F_DISABLE			(0 << 0)
+
+/* VIDCON1 */
+#define EXYNOS_VIDCON1_IVCLK_FALLING_EDGE		(0 << 7)
+#define EXYNOS_VIDCON1_IVCLK_RISING_EDGE		(1 << 7)
+#define EXYNOS_VIDCON1_IHSYNC_NORMAL			(0 << 6)
+#define EXYNOS_VIDCON1_IHSYNC_INVERT			(1 << 6)
+#define EXYNOS_VIDCON1_IVSYNC_NORMAL			(0 << 5)
+#define EXYNOS_VIDCON1_IVSYNC_INVERT			(1 << 5)
+#define EXYNOS_VIDCON1_IVDEN_NORMAL			(0 << 4)
+#define EXYNOS_VIDCON1_IVDEN_INVERT			(1 << 4)
+
+/* VIDCON2 */
+#define EXYNOS_VIDCON2_EN601_DISABLE			(0 << 23)
+#define EXYNOS_VIDCON2_EN601_ENABLE			(1 << 23)
+#define EXYNOS_VIDCON2_EN601_MASK			(1 << 23)
+#define EXYNOS_VIDCON2_WB_DISABLE			(0 << 15)
+#define EXYNOS_VIDCON2_WB_ENABLE			(1 << 15)
+#define EXYNOS_VIDCON2_WB_MASK				(1 << 15)
+#define EXYNOS_VIDCON2_TVFORMATSEL_HW			(0 << 14)
+#define EXYNOS_VIDCON2_TVFORMATSEL_SW			(1 << 14)
+#define EXYNOS_VIDCON2_TVFORMATSEL_MASK			(1 << 14)
+#define EXYNOS_VIDCON2_TVFORMATSEL_YUV422		(1 << 12)
+#define EXYNOS_VIDCON2_TVFORMATSEL_YUV444		(2 << 12)
+#define EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK		(3 << 12)
+#define EXYNOS_VIDCON2_ORGYUV_YCBCR			(0 << 8)
+#define EXYNOS_VIDCON2_ORGYUV_CBCRY			(1 << 8)
+#define EXYNOS_VIDCON2_ORGYUV_MASK			(1 << 8)
+#define EXYNOS_VIDCON2_YUVORD_CBCR			(0 << 7)
+#define EXYNOS_VIDCON2_YUVORD_CRCB			(1 << 7)
+#define EXYNOS_VIDCON2_YUVORD_MASK			(1 << 7)
+
+/* PRTCON */
+#define EXYNOS_PRTCON_UPDATABLE				(0 << 11)
+#define EXYNOS_PRTCON_PROTECT				(1 << 11)
+
+/* VIDTCON0 */
+#define EXYNOS_VIDTCON0_VBPDE(x)			(((x) & 0xff) << 24)
+#define EXYNOS_VIDTCON0_VBPD(x)				(((x) & 0xff) << 16)
+#define EXYNOS_VIDTCON0_VFPD(x)				(((x) & 0xff) << 8)
+#define EXYNOS_VIDTCON0_VSPW(x)				(((x) & 0xff) << 0)
+
+/* VIDTCON1 */
+#define EXYNOS_VIDTCON1_VFPDE(x)			(((x) & 0xff) << 24)
+#define EXYNOS_VIDTCON1_HBPD(x)				(((x) & 0xff) << 16)
+#define EXYNOS_VIDTCON1_HFPD(x)				(((x) & 0xff) << 8)
+#define EXYNOS_VIDTCON1_HSPW(x)				(((x) & 0xff) << 0)
+
+/* VIDTCON2 */
+#define EXYNOS_VIDTCON2_LINEVAL(x)			(((x) & 0x7ff) << 11)
+#define EXYNOS_VIDTCON2_HOZVAL(x)			(((x) & 0x7ff) << 0)
+#define EXYNOS_VIDTCON2_LINEVAL_E(x)			((((x) & 0x800) >> 11) << 23)
+#define EXYNOS_VIDTCON2_HOZVAL_E(x)			((((x) & 0x800) >> 11) << 22)
+
+/* Window 0~4 Control - WINCONx */
+#define EXYNOS_WINCON_DATAPATH_DMA			(0 << 22)
+#define EXYNOS_WINCON_DATAPATH_LOCAL			(1 << 22)
+#define EXYNOS_WINCON_DATAPATH_MASK			(1 << 22)
+#define EXYNOS_WINCON_BUFSEL_0				(0 << 20)
+#define EXYNOS_WINCON_BUFSEL_1				(1 << 20)
+#define EXYNOS_WINCON_BUFSEL_MASK			(1 << 20)
+#define EXYNOS_WINCON_BUFSEL_SHIFT			(20)
+#define EXYNOS_WINCON_BUFAUTO_DISABLE			(0 << 19)
+#define EXYNOS_WINCON_BUFAUTO_ENABLE			(1 << 19)
+#define EXYNOS_WINCON_BUFAUTO_MASK			(1 << 19)
+#define EXYNOS_WINCON_BITSWP_DISABLE			(0 << 18)
+#define EXYNOS_WINCON_BITSWP_ENABLE			(1 << 18)
+#define EXYNOS_WINCON_BITSWP_SHIFT			(18)
+#define EXYNOS_WINCON_BYTESWP_DISABLE			(0 << 17)
+#define EXYNOS_WINCON_BYTESWP_ENABLE			(1 << 17)
+#define EXYNOS_WINCON_BYTESWP_SHIFT			(17)
+#define EXYNOS_WINCON_HAWSWP_DISABLE			(0 << 16)
+#define EXYNOS_WINCON_HAWSWP_ENABLE			(1 << 16)
+#define EXYNOS_WINCON_HAWSWP_SHIFT			(16)
+#define EXYNOS_WINCON_WSWP_DISABLE			(0 << 15)
+#define EXYNOS_WINCON_WSWP_ENABLE			(1 << 15)
+#define EXYNOS_WINCON_WSWP_SHIFT			(15)
+#define EXYNOS_WINCON_INRGB_RGB				(0 << 13)
+#define EXYNOS_WINCON_INRGB_YUV				(1 << 13)
+#define EXYNOS_WINCON_INRGB_MASK			(1 << 13)
+#define EXYNOS_WINCON_BURSTLEN_16WORD			(0 << 9)
+#define EXYNOS_WINCON_BURSTLEN_8WORD			(1 << 9)
+#define EXYNOS_WINCON_BURSTLEN_4WORD			(2 << 9)
+#define EXYNOS_WINCON_BURSTLEN_MASK			(3 << 9)
+#define EXYNOS_WINCON_ALPHA_MULTI_DISABLE		(0 << 7)
+#define EXYNOS_WINCON_ALPHA_MULTI_ENABLE		(1 << 7)
+#define EXYNOS_WINCON_BLD_PLANE				(0 << 6)
+#define EXYNOS_WINCON_BLD_PIXEL				(1 << 6)
+#define EXYNOS_WINCON_BLD_MASK				(1 << 6)
+#define EXYNOS_WINCON_BPPMODE_1BPP			(0 << 2)
+#define EXYNOS_WINCON_BPPMODE_2BPP			(1 << 2)
+#define EXYNOS_WINCON_BPPMODE_4BPP			(2 << 2)
+#define EXYNOS_WINCON_BPPMODE_8BPP_PAL			(3 << 2)
+#define EXYNOS_WINCON_BPPMODE_8BPP			(4 << 2)
+#define EXYNOS_WINCON_BPPMODE_16BPP_565			(5 << 2)
+#define EXYNOS_WINCON_BPPMODE_16BPP_A555		(6 << 2)
+#define EXYNOS_WINCON_BPPMODE_18BPP_666			(8 << 2)
+#define EXYNOS_WINCON_BPPMODE_18BPP_A665		(9 << 2)
+#define EXYNOS_WINCON_BPPMODE_24BPP_888			(0xb << 2)
+#define EXYNOS_WINCON_BPPMODE_24BPP_A887		(0xc << 2)
+#define EXYNOS_WINCON_BPPMODE_32BPP			(0xd << 2)
+#define EXYNOS_WINCON_BPPMODE_16BPP_A444		(0xe << 2)
+#define EXYNOS_WINCON_BPPMODE_15BPP_555			(0xf << 2)
+#define EXYNOS_WINCON_BPPMODE_MASK			(0xf << 2)
+#define EXYNOS_WINCON_BPPMODE_SHIFT			(2)
+#define EXYNOS_WINCON_ALPHA0_SEL			(0 << 1)
+#define EXYNOS_WINCON_ALPHA1_SEL			(1 << 1)
+#define EXYNOS_WINCON_ALPHA_SEL_MASK			(1 << 1)
+#define EXYNOS_WINCON_ENWIN_DISABLE			(0 << 0)
+#define EXYNOS_WINCON_ENWIN_ENABLE			(1 << 0)
+
+/* WINCON1 special */
+#define EXYNOS_WINCON1_VP_DISABLE			(0 << 24)
+#define EXYNOS_WINCON1_VP_ENABLE			(1 << 24)
+#define EXYNOS_WINCON1_LOCALSEL_FIMC1			(0 << 23)
+#define EXYNOS_WINCON1_LOCALSEL_VP			(1 << 23)
+#define EXYNOS_WINCON1_LOCALSEL_MASK			(1 << 23)
+
+/* WINSHMAP */
+#define EXYNOS_WINSHMAP_PROTECT(x)			(((x) & 0x1f) << 10)
+#define EXYNOS_WINSHMAP_CH_ENABLE(x)			(1 << (x))
+#define EXYNOS_WINSHMAP_CH_DISABLE(x)			(1 << (x))
+#define EXYNOS_WINSHMAP_LOCAL_ENABLE(x)			(0x20 << (x))
+#define EXYNOS_WINSHMAP_LOCAL_DISABLE(x)		(0x20 << (x))
+
+/* VIDOSDxA, VIDOSDxB */
+#define EXYNOS_VIDOSD_LEFT_X(x)				(((x) & 0x7ff) << 11)
+#define EXYNOS_VIDOSD_TOP_Y(x)				(((x) & 0x7ff) << 0)
+#define EXYNOS_VIDOSD_RIGHT_X(x)			(((x) & 0x7ff) << 11)
+#define EXYNOS_VIDOSD_BOTTOM_Y(x)			(((x) & 0x7ff) << 0)
+#define EXYNOS_VIDOSD_RIGHT_X_E(x)			(((x) & 0x1) << 23)
+#define EXYNOS_VIDOSD_BOTTOM_Y_E(x)			(((x) & 0x1) << 22)
+
+/* VIDOSD0C, VIDOSDxD */
+#define EXYNOS_VIDOSD_SIZE(x)				(((x) & 0xffffff) << 0)
+
+/* VIDOSDxC (1~4) */
+#define EXYNOS_VIDOSD_ALPHA0_R(x)			(((x) & 0xf) << 20)
+#define EXYNOS_VIDOSD_ALPHA0_G(x)			(((x) & 0xf) << 16)
+#define EXYNOS_VIDOSD_ALPHA0_B(x)			(((x) & 0xf) << 12)
+#define EXYNOS_VIDOSD_ALPHA1_R(x)			(((x) & 0xf) << 8)
+#define EXYNOS_VIDOSD_ALPHA1_G(x)			(((x) & 0xf) << 4)
+#define EXYNOS_VIDOSD_ALPHA1_B(x)			(((x) & 0xf) << 0)
+#define EXYNOS_VIDOSD_ALPHA0_SHIFT			(12)
+#define EXYNOS_VIDOSD_ALPHA1_SHIFT			(0)
+
+/* Start Address */
+#define EXYNOS_VIDADDR_START_VBANK(x)			(((x) & 0xff) << 24)
+#define EXYNOS_VIDADDR_START_VBASEU(x)			(((x) & 0xffffff) << 0)
+
+/* End Address */
+#define EXYNOS_VIDADDR_END_VBASEL(x)			(((x) & 0xffffff) << 0)
+
+/* Buffer Size */
+#define EXYNOS_VIDADDR_OFFSIZE(x)			(((x) & 0x1fff) << 13)
+#define EXYNOS_VIDADDR_PAGEWIDTH(x)			(((x) & 0x1fff) << 0)
+#define EXYNOS_VIDADDR_OFFSIZE_E(x)			((((x) & 0x2000) >> 13) << 27)
+#define EXYNOS_VIDADDR_PAGEWIDTH_E(x)			((((x) & 0x2000) >> 13) << 26)
+
+/* WIN Color Map */
+#define EXYNOS_WINMAP_COLOR(x)				((x) & 0xffffff)
+
+/* VIDINTCON0 */
+#define EXYNOS_VIDINTCON0_SYSMAINCON_DISABLE		(0 << 19)
+#define EXYNOS_VIDINTCON0_SYSMAINCON_ENABLE		(1 << 19)
+#define EXYNOS_VIDINTCON0_SYSSUBCON_DISABLE		(0 << 18)
+#define EXYNOS_VIDINTCON0_SYSSUBCON_ENABLE		(1 << 18)
+#define EXYNOS_VIDINTCON0_SYSIFDONE_DISABLE		(0 << 17)
+#define EXYNOS_VIDINTCON0_SYSIFDONE_ENABLE		(1 << 17)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_BACK		(0 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_VSYNC		(1 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_ACTIVE		(2 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_FRONT		(3 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_MASK		(3 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL1_NONE		(0 << 13)
+#define EXYNOS_VIDINTCON0_FRAMESEL1_BACK		(1 << 13)
+#define EXYNOS_VIDINTCON0_FRAMESEL1_VSYNC		(2 << 13)
+#define EXYNOS_VIDINTCON0_FRAMESEL1_FRONT		(3 << 13)
+#define EXYNOS_VIDINTCON0_INTFRMEN_DISABLE		(0 << 12)
+#define EXYNOS_VIDINTCON0_INTFRMEN_ENABLE		(1 << 12)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN4			(1 << 11)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN3			(1 << 10)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN2			(1 << 9)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN1			(1 << 6)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN0			(1 << 5)
+#define EXYNOS_VIDINTCON0_FIFOSEL_ALL			(0x73 << 5)
+#define EXYNOS_VIDINTCON0_FIFOSEL_MASK			(0x73 << 5)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_25			(0 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_50			(1 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_75			(2 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_EMPTY		(3 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_FULL		(4 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_MASK		(7 << 2)
+#define EXYNOS_VIDINTCON0_INTFIFO_DISABLE		(0 << 1)
+#define EXYNOS_VIDINTCON0_INTFIFO_ENABLE		(1 << 1)
+#define EXYNOS_VIDINTCON0_INT_DISABLE			(0 << 0)
+#define EXYNOS_VIDINTCON0_INT_ENABLE			(1 << 0)
+#define EXYNOS_VIDINTCON0_INT_MASK			(1 << 0)
+
+/* VIDINTCON1 */
+#define EXYNOS_VIDINTCON1_INTVPPEND			(1 << 5)
+#define EXYNOS_VIDINTCON1_INTI80PEND			(1 << 2)
+#define EXYNOS_VIDINTCON1_INTFRMPEND			(1 << 1)
+#define EXYNOS_VIDINTCON1_INTFIFOPEND			(1 << 0)
+
+/* WINMAP */
+#define EXYNOS_WINMAP_ENABLE				(1 << 24)
+
+/* WxKEYCON0 (1~4) */
+#define EXYNOS_KEYCON0_KEYBLEN_DISABLE			(0 << 26)
+#define EXYNOS_KEYCON0_KEYBLEN_ENABLE			(1 << 26)
+#define EXYNOS_KEYCON0_KEY_DISABLE			(0 << 25)
+#define EXYNOS_KEYCON0_KEY_ENABLE			(1 << 25)
+#define EXYNOS_KEYCON0_DIRCON_MATCH_FG			(0 << 24)
+#define EXYNOS_KEYCON0_DIRCON_MATCH_BG			(1 << 24)
+#define EXYNOS_KEYCON0_COMPKEY(x)			(((x) & 0xffffff) << 0)
+
+/* WxKEYCON1 (1~4) */
+#define EXYNOS_KEYCON1_COLVAL(x)			(((x) & 0xffffff) << 0)
+
+/* DUALRGB */
+#define EXYNOS_DUALRGB_BYPASS_SINGLE			(0x00 << 0)
+#define EXYNOS_DUALRGB_BYPASS_DUAL			(0x01 << 0)
+#define EXYNOS_DUALRGB_MIE_DUAL				(0x10 << 0)
+#define EXYNOS_DUALRGB_MIE_SINGLE			(0x11 << 0)
+#define EXYNOS_DUALRGB_LINESPLIT			(0x0 << 2)
+#define EXYNOS_DUALRGB_FRAMESPLIT			(0x1 << 2)
+#define EXYNOS_DUALRGB_SUB_CNT(x)			((x & 0xfff) << 4)
+#define EXYNOS_DUALRGB_VDEN_EN_DISABLE			(0x0 << 16)
+#define EXYNOS_DUALRGB_VDEN_EN_ENABLE			(0x1 << 16)
+#define EXYNOS_DUALRGB_MAIN_CNT(x)			((x & 0xfff) << 18)
+
+/* I80IFCONA0 and I80IFCONA1 */
+#define EXYNOS_LCD_CS_SETUP(x)				(((x) & 0xf) << 16)
+#define EXYNOS_LCD_WR_SETUP(x)				(((x) & 0xf) << 12)
+#define EXYNOS_LCD_WR_ACT(x)				(((x) & 0xf) << 8)
+#define EXYNOS_LCD_WR_HOLD(x)				(((x) & 0xf) << 4)
+#define EXYNOS_RSPOL_LOW				(0 << 2)
+#define EXYNOS_RSPOL_HIGH				(1 << 2)
+#define EXYNOS_I80IFEN_DISABLE				(0 << 0)
+#define EXYNOS_I80IFEN_ENABLE				(1 << 0)
+
+/* TRIGCON */
+#define EXYNOS_I80SOFT_TRIG_EN				(1 << 0)
+#define EXYNOS_I80START_TRIG				(1 << 1)
+#define EXYNOS_I80STATUS_TRIG_DONE			(1 << 2)
+
+/* DP_MIE_CLKCON */
+#define EXYNOS_DP_MIE_DISABLE				(0 << 0)
+#define EXYNOS_DP_CLK_ENABLE				(1 << 1)
+#define EXYNOS_MIE_CLK_ENABLE				(3 << 0)
+
+#endif /* _REGS_FB_H */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/gpio.h
new file mode 100644
index 000000000..f9975d791
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/gpio.h
@@ -0,0 +1,1547 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+struct s5p_gpio_bank {
+	unsigned int	con;
+	unsigned int	dat;
+	unsigned int	pull;
+	unsigned int	drv;
+	unsigned int	pdn_con;
+	unsigned int	pdn_pull;
+	unsigned char	res1[8];
+};
+
+/* GPIO pins per bank  */
+#define GPIO_PER_BANK 8
+
+/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
+enum exynos4_gpio_pin {
+	/* GPIO_PART1_STARTS */
+	EXYNOS4_GPIO_A00,		/* 0 */
+	EXYNOS4_GPIO_A01,
+	EXYNOS4_GPIO_A02,
+	EXYNOS4_GPIO_A03,
+	EXYNOS4_GPIO_A04,
+	EXYNOS4_GPIO_A05,
+	EXYNOS4_GPIO_A06,
+	EXYNOS4_GPIO_A07,
+	EXYNOS4_GPIO_A10,		/* 8 */
+	EXYNOS4_GPIO_A11,
+	EXYNOS4_GPIO_A12,
+	EXYNOS4_GPIO_A13,
+	EXYNOS4_GPIO_A14,
+	EXYNOS4_GPIO_A15,
+	EXYNOS4_GPIO_A16,
+	EXYNOS4_GPIO_A17,
+	EXYNOS4_GPIO_B0,		/* 16 0x10 */
+	EXYNOS4_GPIO_B1,
+	EXYNOS4_GPIO_B2,
+	EXYNOS4_GPIO_B3,
+	EXYNOS4_GPIO_B4,
+	EXYNOS4_GPIO_B5,
+	EXYNOS4_GPIO_B6,
+	EXYNOS4_GPIO_B7,
+	EXYNOS4_GPIO_C00,		/* 24 0x18 */
+	EXYNOS4_GPIO_C01,
+	EXYNOS4_GPIO_C02,
+	EXYNOS4_GPIO_C03,
+	EXYNOS4_GPIO_C04,
+	EXYNOS4_GPIO_C05,
+	EXYNOS4_GPIO_C06,
+	EXYNOS4_GPIO_C07,
+	EXYNOS4_GPIO_C10,		/* 32 0x20*/
+	EXYNOS4_GPIO_C11,
+	EXYNOS4_GPIO_C12,
+	EXYNOS4_GPIO_C13,
+	EXYNOS4_GPIO_C14,
+	EXYNOS4_GPIO_C15,
+	EXYNOS4_GPIO_C16,
+	EXYNOS4_GPIO_C17,
+	EXYNOS4_GPIO_D00,		/* 40 0x28 */
+	EXYNOS4_GPIO_D01,
+	EXYNOS4_GPIO_D02,
+	EXYNOS4_GPIO_D03,
+	EXYNOS4_GPIO_D04,
+	EXYNOS4_GPIO_D05,
+	EXYNOS4_GPIO_D06,
+	EXYNOS4_GPIO_D07,
+	EXYNOS4_GPIO_D10,		/* 48 0x30 */
+	EXYNOS4_GPIO_D11,
+	EXYNOS4_GPIO_D12,
+	EXYNOS4_GPIO_D13,
+	EXYNOS4_GPIO_D14,
+	EXYNOS4_GPIO_D15,
+	EXYNOS4_GPIO_D16,
+	EXYNOS4_GPIO_D17,
+	EXYNOS4_GPIO_E00,		/* 56 0x38 */
+	EXYNOS4_GPIO_E01,
+	EXYNOS4_GPIO_E02,
+	EXYNOS4_GPIO_E03,
+	EXYNOS4_GPIO_E04,
+	EXYNOS4_GPIO_E05,
+	EXYNOS4_GPIO_E06,
+	EXYNOS4_GPIO_E07,
+	EXYNOS4_GPIO_E10,		/* 64 0x40 */
+	EXYNOS4_GPIO_E11,
+	EXYNOS4_GPIO_E12,
+	EXYNOS4_GPIO_E13,
+	EXYNOS4_GPIO_E14,
+	EXYNOS4_GPIO_E15,
+	EXYNOS4_GPIO_E16,
+	EXYNOS4_GPIO_E17,
+	EXYNOS4_GPIO_E20,		/* 72 0x48 */
+	EXYNOS4_GPIO_E21,
+	EXYNOS4_GPIO_E22,
+	EXYNOS4_GPIO_E23,
+	EXYNOS4_GPIO_E24,
+	EXYNOS4_GPIO_E25,
+	EXYNOS4_GPIO_E26,
+	EXYNOS4_GPIO_E27,
+	EXYNOS4_GPIO_E30,		/* 80 0x50 */
+	EXYNOS4_GPIO_E31,
+	EXYNOS4_GPIO_E32,
+	EXYNOS4_GPIO_E33,
+	EXYNOS4_GPIO_E34,
+	EXYNOS4_GPIO_E35,
+	EXYNOS4_GPIO_E36,
+	EXYNOS4_GPIO_E37,
+	EXYNOS4_GPIO_E40,		/* 88 0x58 */
+	EXYNOS4_GPIO_E41,
+	EXYNOS4_GPIO_E42,
+	EXYNOS4_GPIO_E43,
+	EXYNOS4_GPIO_E44,
+	EXYNOS4_GPIO_E45,
+	EXYNOS4_GPIO_E46,
+	EXYNOS4_GPIO_E47,
+	EXYNOS4_GPIO_F00,		/* 96 0x60 */
+	EXYNOS4_GPIO_F01,
+	EXYNOS4_GPIO_F02,
+	EXYNOS4_GPIO_F03,
+	EXYNOS4_GPIO_F04,
+	EXYNOS4_GPIO_F05,
+	EXYNOS4_GPIO_F06,
+	EXYNOS4_GPIO_F07,
+	EXYNOS4_GPIO_F10,		/* 104 0x68 */
+	EXYNOS4_GPIO_F11,
+	EXYNOS4_GPIO_F12,
+	EXYNOS4_GPIO_F13,
+	EXYNOS4_GPIO_F14,
+	EXYNOS4_GPIO_F15,
+	EXYNOS4_GPIO_F16,
+	EXYNOS4_GPIO_F17,
+	EXYNOS4_GPIO_F20,		/* 112 0x70 */
+	EXYNOS4_GPIO_F21,
+	EXYNOS4_GPIO_F22,
+	EXYNOS4_GPIO_F23,
+	EXYNOS4_GPIO_F24,
+	EXYNOS4_GPIO_F25,
+	EXYNOS4_GPIO_F26,
+	EXYNOS4_GPIO_F27,
+	EXYNOS4_GPIO_F30,		/* 120 0x78 */
+	EXYNOS4_GPIO_F31,
+	EXYNOS4_GPIO_F32,
+	EXYNOS4_GPIO_F33,
+	EXYNOS4_GPIO_F34,
+	EXYNOS4_GPIO_F35,
+	EXYNOS4_GPIO_F36,
+	EXYNOS4_GPIO_F37,
+
+	/* GPIO_PART2_STARTS */
+	EXYNOS4_GPIO_MAX_PORT_PART_1,	/* 128 0x80 */
+	EXYNOS4_GPIO_J00 = EXYNOS4_GPIO_MAX_PORT_PART_1,
+	EXYNOS4_GPIO_J01,
+	EXYNOS4_GPIO_J02,
+	EXYNOS4_GPIO_J03,
+	EXYNOS4_GPIO_J04,
+	EXYNOS4_GPIO_J05,
+	EXYNOS4_GPIO_J06,
+	EXYNOS4_GPIO_J07,
+	EXYNOS4_GPIO_J10,		/* 136 0x88 */
+	EXYNOS4_GPIO_J11,
+	EXYNOS4_GPIO_J12,
+	EXYNOS4_GPIO_J13,
+	EXYNOS4_GPIO_J14,
+	EXYNOS4_GPIO_J15,
+	EXYNOS4_GPIO_J16,
+	EXYNOS4_GPIO_J17,
+	EXYNOS4_GPIO_K00,		/* 144 0x90 */
+	EXYNOS4_GPIO_K01,
+	EXYNOS4_GPIO_K02,
+	EXYNOS4_GPIO_K03,
+	EXYNOS4_GPIO_K04,
+	EXYNOS4_GPIO_K05,
+	EXYNOS4_GPIO_K06,
+	EXYNOS4_GPIO_K07,
+	EXYNOS4_GPIO_K10,		/* 152 0x98 */
+	EXYNOS4_GPIO_K11,
+	EXYNOS4_GPIO_K12,
+	EXYNOS4_GPIO_K13,
+	EXYNOS4_GPIO_K14,
+	EXYNOS4_GPIO_K15,
+	EXYNOS4_GPIO_K16,
+	EXYNOS4_GPIO_K17,
+	EXYNOS4_GPIO_K20,		/* 160 0xA0 */
+	EXYNOS4_GPIO_K21,
+	EXYNOS4_GPIO_K22,
+	EXYNOS4_GPIO_K23,
+	EXYNOS4_GPIO_K24,
+	EXYNOS4_GPIO_K25,
+	EXYNOS4_GPIO_K26,
+	EXYNOS4_GPIO_K27,
+	EXYNOS4_GPIO_K30,		/* 168 0xA8 */
+	EXYNOS4_GPIO_K31,
+	EXYNOS4_GPIO_K32,
+	EXYNOS4_GPIO_K33,
+	EXYNOS4_GPIO_K34,
+	EXYNOS4_GPIO_K35,
+	EXYNOS4_GPIO_K36,
+	EXYNOS4_GPIO_K37,
+	EXYNOS4_GPIO_L00,		/* 176 0xB0 */
+	EXYNOS4_GPIO_L01,
+	EXYNOS4_GPIO_L02,
+	EXYNOS4_GPIO_L03,
+	EXYNOS4_GPIO_L04,
+	EXYNOS4_GPIO_L05,
+	EXYNOS4_GPIO_L06,
+	EXYNOS4_GPIO_L07,
+	EXYNOS4_GPIO_L10,		/* 184 0xB8 */
+	EXYNOS4_GPIO_L11,
+	EXYNOS4_GPIO_L12,
+	EXYNOS4_GPIO_L13,
+	EXYNOS4_GPIO_L14,
+	EXYNOS4_GPIO_L15,
+	EXYNOS4_GPIO_L16,
+	EXYNOS4_GPIO_L17,
+	EXYNOS4_GPIO_L20,		/* 192 0xC0 */
+	EXYNOS4_GPIO_L21,
+	EXYNOS4_GPIO_L22,
+	EXYNOS4_GPIO_L23,
+	EXYNOS4_GPIO_L24,
+	EXYNOS4_GPIO_L25,
+	EXYNOS4_GPIO_L26,
+	EXYNOS4_GPIO_L27,
+	EXYNOS4_GPIO_Y00,		/* 200 0xC8 */
+	EXYNOS4_GPIO_Y01,
+	EXYNOS4_GPIO_Y02,
+	EXYNOS4_GPIO_Y03,
+	EXYNOS4_GPIO_Y04,
+	EXYNOS4_GPIO_Y05,
+	EXYNOS4_GPIO_Y06,
+	EXYNOS4_GPIO_Y07,
+	EXYNOS4_GPIO_Y10,		/* 208 0xD0 */
+	EXYNOS4_GPIO_Y11,
+	EXYNOS4_GPIO_Y12,
+	EXYNOS4_GPIO_Y13,
+	EXYNOS4_GPIO_Y14,
+	EXYNOS4_GPIO_Y15,
+	EXYNOS4_GPIO_Y16,
+	EXYNOS4_GPIO_Y17,
+	EXYNOS4_GPIO_Y20,		/* 216 0xD8 */
+	EXYNOS4_GPIO_Y21,
+	EXYNOS4_GPIO_Y22,
+	EXYNOS4_GPIO_Y23,
+	EXYNOS4_GPIO_Y24,
+	EXYNOS4_GPIO_Y25,
+	EXYNOS4_GPIO_Y26,
+	EXYNOS4_GPIO_Y27,
+	EXYNOS4_GPIO_Y30,		/* 224 0xE0 */
+	EXYNOS4_GPIO_Y31,
+	EXYNOS4_GPIO_Y32,
+	EXYNOS4_GPIO_Y33,
+	EXYNOS4_GPIO_Y34,
+	EXYNOS4_GPIO_Y35,
+	EXYNOS4_GPIO_Y36,
+	EXYNOS4_GPIO_Y37,
+	EXYNOS4_GPIO_Y40,		/* 232 0xE8 */
+	EXYNOS4_GPIO_Y41,
+	EXYNOS4_GPIO_Y42,
+	EXYNOS4_GPIO_Y43,
+	EXYNOS4_GPIO_Y44,
+	EXYNOS4_GPIO_Y45,
+	EXYNOS4_GPIO_Y46,
+	EXYNOS4_GPIO_Y47,
+	EXYNOS4_GPIO_Y50,		/* 240 0xF0 */
+	EXYNOS4_GPIO_Y51,
+	EXYNOS4_GPIO_Y52,
+	EXYNOS4_GPIO_Y53,
+	EXYNOS4_GPIO_Y54,
+	EXYNOS4_GPIO_Y55,
+	EXYNOS4_GPIO_Y56,
+	EXYNOS4_GPIO_Y57,
+	EXYNOS4_GPIO_Y60,		/* 248 0xF8 */
+	EXYNOS4_GPIO_Y61,
+	EXYNOS4_GPIO_Y62,
+	EXYNOS4_GPIO_Y63,
+	EXYNOS4_GPIO_Y64,
+	EXYNOS4_GPIO_Y65,
+	EXYNOS4_GPIO_Y66,
+	EXYNOS4_GPIO_Y67,
+
+	/* GPIO_PART2_1 STARTS */
+	EXYNOS4_GPIO_MAX_PORT_PART_2_0, /* 256 0x100 */
+	EXYNOS4_GPIO_X00 = EXYNOS4_GPIO_MAX_PORT_PART_2_0,
+	EXYNOS4_GPIO_X01,
+	EXYNOS4_GPIO_X02,
+	EXYNOS4_GPIO_X03,
+	EXYNOS4_GPIO_X04,
+	EXYNOS4_GPIO_X05,
+	EXYNOS4_GPIO_X06,
+	EXYNOS4_GPIO_X07,
+	EXYNOS4_GPIO_X10,		/* 264 0x108 */
+	EXYNOS4_GPIO_X11,
+	EXYNOS4_GPIO_X12,
+	EXYNOS4_GPIO_X13,
+	EXYNOS4_GPIO_X14,
+	EXYNOS4_GPIO_X15,
+	EXYNOS4_GPIO_X16,
+	EXYNOS4_GPIO_X17,
+	EXYNOS4_GPIO_X20,		/* 272 0x110 */
+	EXYNOS4_GPIO_X21,
+	EXYNOS4_GPIO_X22,
+	EXYNOS4_GPIO_X23,
+	EXYNOS4_GPIO_X24,
+	EXYNOS4_GPIO_X25,
+	EXYNOS4_GPIO_X26,
+	EXYNOS4_GPIO_X27,
+	EXYNOS4_GPIO_X30,		/* 280 0x118 */
+	EXYNOS4_GPIO_X31,
+	EXYNOS4_GPIO_X32,
+	EXYNOS4_GPIO_X33,
+	EXYNOS4_GPIO_X34,
+	EXYNOS4_GPIO_X35,
+	EXYNOS4_GPIO_X36,
+	EXYNOS4_GPIO_X37,
+
+	/* GPIO_PART3_STARTS */
+	EXYNOS4_GPIO_MAX_PORT_PART_2_1,	/* 288 0x120 */
+	EXYNOS4_GPIO_Z0 = EXYNOS4_GPIO_MAX_PORT_PART_2_1,
+	EXYNOS4_GPIO_Z1,
+	EXYNOS4_GPIO_Z2,
+	EXYNOS4_GPIO_Z3,
+	EXYNOS4_GPIO_Z4,
+	EXYNOS4_GPIO_Z5,
+	EXYNOS4_GPIO_Z6,
+	EXYNOS4_GPIO_Z7,
+
+	EXYNOS4_GPIO_MAX_PORT
+};
+
+enum exynos4X12_gpio_pin {
+	/* EXYNOS4X12_GPIO_PART1_0 starts here */
+	EXYNOS4X12_GPIO_A00,		/* 0 */
+	EXYNOS4X12_GPIO_A01,
+	EXYNOS4X12_GPIO_A02,
+	EXYNOS4X12_GPIO_A03,
+	EXYNOS4X12_GPIO_A04,
+	EXYNOS4X12_GPIO_A05,
+	EXYNOS4X12_GPIO_A06,
+	EXYNOS4X12_GPIO_A07,
+	EXYNOS4X12_GPIO_A10,		/* 8 */
+	EXYNOS4X12_GPIO_A11,
+	EXYNOS4X12_GPIO_A12,
+	EXYNOS4X12_GPIO_A13,
+	EXYNOS4X12_GPIO_A14,
+	EXYNOS4X12_GPIO_A15,
+	EXYNOS4X12_GPIO_A16,
+	EXYNOS4X12_GPIO_A17,
+	EXYNOS4X12_GPIO_B0,		/* 16 0x10 */
+	EXYNOS4X12_GPIO_B1,
+	EXYNOS4X12_GPIO_B2,
+	EXYNOS4X12_GPIO_B3,
+	EXYNOS4X12_GPIO_B4,
+	EXYNOS4X12_GPIO_B5,
+	EXYNOS4X12_GPIO_B6,
+	EXYNOS4X12_GPIO_B7,
+	EXYNOS4X12_GPIO_C00,		/* 24 0x18 */
+	EXYNOS4X12_GPIO_C01,
+	EXYNOS4X12_GPIO_C02,
+	EXYNOS4X12_GPIO_C03,
+	EXYNOS4X12_GPIO_C04,
+	EXYNOS4X12_GPIO_C05,
+	EXYNOS4X12_GPIO_C06,
+	EXYNOS4X12_GPIO_C07,
+	EXYNOS4X12_GPIO_C10,		/* 32 0x20 */
+	EXYNOS4X12_GPIO_C11,
+	EXYNOS4X12_GPIO_C12,
+	EXYNOS4X12_GPIO_C13,
+	EXYNOS4X12_GPIO_C14,
+	EXYNOS4X12_GPIO_C15,
+	EXYNOS4X12_GPIO_C16,
+	EXYNOS4X12_GPIO_C17,
+	EXYNOS4X12_GPIO_D00,		/* 40 0x28 */
+	EXYNOS4X12_GPIO_D01,
+	EXYNOS4X12_GPIO_D02,
+	EXYNOS4X12_GPIO_D03,
+	EXYNOS4X12_GPIO_D04,
+	EXYNOS4X12_GPIO_D05,
+	EXYNOS4X12_GPIO_D06,
+	EXYNOS4X12_GPIO_D07,
+	EXYNOS4X12_GPIO_D10,		/* 48 0x30 */
+	EXYNOS4X12_GPIO_D11,
+	EXYNOS4X12_GPIO_D12,
+	EXYNOS4X12_GPIO_D13,
+	EXYNOS4X12_GPIO_D14,
+	EXYNOS4X12_GPIO_D15,
+	EXYNOS4X12_GPIO_D16,
+	EXYNOS4X12_GPIO_D17,
+	EXYNOS4X12_GPIO_MAX_PORT_PART_1_0, /* 56 0x38 */
+	/* EXYNOS4X12_GPIO_PART1_1 starts here */
+	EXYNOS4X12_GPIO_F00 = EXYNOS4X12_GPIO_MAX_PORT_PART_1_0,
+	EXYNOS4X12_GPIO_F01,
+	EXYNOS4X12_GPIO_F02,
+	EXYNOS4X12_GPIO_F03,
+	EXYNOS4X12_GPIO_F04,
+	EXYNOS4X12_GPIO_F05,
+	EXYNOS4X12_GPIO_F06,
+	EXYNOS4X12_GPIO_F07,
+	EXYNOS4X12_GPIO_F10,		/* 64 0x40 */
+	EXYNOS4X12_GPIO_F11,
+	EXYNOS4X12_GPIO_F12,
+	EXYNOS4X12_GPIO_F13,
+	EXYNOS4X12_GPIO_F14,
+	EXYNOS4X12_GPIO_F15,
+	EXYNOS4X12_GPIO_F16,
+	EXYNOS4X12_GPIO_F17,
+	EXYNOS4X12_GPIO_F20,		/* 72 0x48 */
+	EXYNOS4X12_GPIO_F21,
+	EXYNOS4X12_GPIO_F22,
+	EXYNOS4X12_GPIO_F23,
+	EXYNOS4X12_GPIO_F24,
+	EXYNOS4X12_GPIO_F25,
+	EXYNOS4X12_GPIO_F26,
+	EXYNOS4X12_GPIO_F27,
+	EXYNOS4X12_GPIO_F30,		/* 80 0x50 */
+	EXYNOS4X12_GPIO_F31,
+	EXYNOS4X12_GPIO_F32,
+	EXYNOS4X12_GPIO_F33,
+	EXYNOS4X12_GPIO_F34,
+	EXYNOS4X12_GPIO_F35,
+	EXYNOS4X12_GPIO_F36,
+	EXYNOS4X12_GPIO_F37,
+	EXYNOS4X12_GPIO_MAX_PORT_PART_1_1, /* 88 0x58 */
+	/* EXYNOS4X12_GPIO_PART1_2 starts here */
+	EXYNOS4X12_GPIO_J00 = EXYNOS4X12_GPIO_MAX_PORT_PART_1_1,
+	EXYNOS4X12_GPIO_J01,
+	EXYNOS4X12_GPIO_J02,
+	EXYNOS4X12_GPIO_J03,
+	EXYNOS4X12_GPIO_J04,
+	EXYNOS4X12_GPIO_J05,
+	EXYNOS4X12_GPIO_J06,
+	EXYNOS4X12_GPIO_J07,
+	EXYNOS4X12_GPIO_J10,		/* 96 0x60 */
+	EXYNOS4X12_GPIO_J11,
+	EXYNOS4X12_GPIO_J12,
+	EXYNOS4X12_GPIO_J13,
+	EXYNOS4X12_GPIO_J14,
+	EXYNOS4X12_GPIO_J15,
+	EXYNOS4X12_GPIO_J16,
+	EXYNOS4X12_GPIO_J17,
+
+	/**
+	 * EXYNOS4X12_GPIO_PART2_0 is not used
+	 * EXYNOS4X12_GPIO_PART2_1 starts here
+	 */
+	EXYNOS4X12_GPIO_MAX_PORT_PART_1_2, /* 104 0x66 */
+	EXYNOS4X12_GPIO_K00 = EXYNOS4X12_GPIO_MAX_PORT_PART_1_2,
+	EXYNOS4X12_GPIO_K01,
+	EXYNOS4X12_GPIO_K02,
+	EXYNOS4X12_GPIO_K03,
+	EXYNOS4X12_GPIO_K04,
+	EXYNOS4X12_GPIO_K05,
+	EXYNOS4X12_GPIO_K06,
+	EXYNOS4X12_GPIO_K07,
+	EXYNOS4X12_GPIO_K10,		/* 112 0x70 */
+	EXYNOS4X12_GPIO_K11,
+	EXYNOS4X12_GPIO_K12,
+	EXYNOS4X12_GPIO_K13,
+	EXYNOS4X12_GPIO_K14,
+	EXYNOS4X12_GPIO_K15,
+	EXYNOS4X12_GPIO_K16,
+	EXYNOS4X12_GPIO_K17,
+	EXYNOS4X12_GPIO_K20,		/* 120 0x78 */
+	EXYNOS4X12_GPIO_K21,
+	EXYNOS4X12_GPIO_K22,
+	EXYNOS4X12_GPIO_K23,
+	EXYNOS4X12_GPIO_K24,
+	EXYNOS4X12_GPIO_K25,
+	EXYNOS4X12_GPIO_K26,
+	EXYNOS4X12_GPIO_K27,
+	EXYNOS4X12_GPIO_K30,		/* 128 0x80 */
+	EXYNOS4X12_GPIO_K31,
+	EXYNOS4X12_GPIO_K32,
+	EXYNOS4X12_GPIO_K33,
+	EXYNOS4X12_GPIO_K34,
+	EXYNOS4X12_GPIO_K35,
+	EXYNOS4X12_GPIO_K36,
+	EXYNOS4X12_GPIO_K37,
+	EXYNOS4X12_GPIO_L00,		/* 136 0x88 */
+	EXYNOS4X12_GPIO_L01,
+	EXYNOS4X12_GPIO_L02,
+	EXYNOS4X12_GPIO_L03,
+	EXYNOS4X12_GPIO_L04,
+	EXYNOS4X12_GPIO_L05,
+	EXYNOS4X12_GPIO_L06,
+	EXYNOS4X12_GPIO_L07,
+	EXYNOS4X12_GPIO_L10,		/* 144 0x90 */
+	EXYNOS4X12_GPIO_L11,
+	EXYNOS4X12_GPIO_L12,
+	EXYNOS4X12_GPIO_L13,
+	EXYNOS4X12_GPIO_L14,
+	EXYNOS4X12_GPIO_L15,
+	EXYNOS4X12_GPIO_L16,
+	EXYNOS4X12_GPIO_L17,
+	EXYNOS4X12_GPIO_L20,		/* 152 0x98 */
+	EXYNOS4X12_GPIO_L21,
+	EXYNOS4X12_GPIO_L22,
+	EXYNOS4X12_GPIO_L23,
+	EXYNOS4X12_GPIO_L24,
+	EXYNOS4X12_GPIO_L25,
+	EXYNOS4X12_GPIO_L26,
+	EXYNOS4X12_GPIO_L27,
+	EXYNOS4X12_GPIO_Y00,		/* 160 0xa0 */
+	EXYNOS4X12_GPIO_Y01,
+	EXYNOS4X12_GPIO_Y02,
+	EXYNOS4X12_GPIO_Y03,
+	EXYNOS4X12_GPIO_Y04,
+	EXYNOS4X12_GPIO_Y05,
+	EXYNOS4X12_GPIO_Y06,
+	EXYNOS4X12_GPIO_Y07,
+	EXYNOS4X12_GPIO_Y10,		/* 168 0xa8 */
+	EXYNOS4X12_GPIO_Y11,
+	EXYNOS4X12_GPIO_Y12,
+	EXYNOS4X12_GPIO_Y13,
+	EXYNOS4X12_GPIO_Y14,
+	EXYNOS4X12_GPIO_Y15,
+	EXYNOS4X12_GPIO_Y16,
+	EXYNOS4X12_GPIO_Y17,
+	EXYNOS4X12_GPIO_Y20,		/* 176 0xb0 */
+	EXYNOS4X12_GPIO_Y21,
+	EXYNOS4X12_GPIO_Y22,
+	EXYNOS4X12_GPIO_Y23,
+	EXYNOS4X12_GPIO_Y24,
+	EXYNOS4X12_GPIO_Y25,
+	EXYNOS4X12_GPIO_Y26,
+	EXYNOS4X12_GPIO_Y27,
+	EXYNOS4X12_GPIO_Y30,		/* 184 0xb8 */
+	EXYNOS4X12_GPIO_Y31,
+	EXYNOS4X12_GPIO_Y32,
+	EXYNOS4X12_GPIO_Y33,
+	EXYNOS4X12_GPIO_Y34,
+	EXYNOS4X12_GPIO_Y35,
+	EXYNOS4X12_GPIO_Y36,
+	EXYNOS4X12_GPIO_Y37,
+	EXYNOS4X12_GPIO_Y40,		/* 192 0xc0 */
+	EXYNOS4X12_GPIO_Y41,
+	EXYNOS4X12_GPIO_Y42,
+	EXYNOS4X12_GPIO_Y43,
+	EXYNOS4X12_GPIO_Y44,
+	EXYNOS4X12_GPIO_Y45,
+	EXYNOS4X12_GPIO_Y46,
+	EXYNOS4X12_GPIO_Y47,
+	EXYNOS4X12_GPIO_Y50,		/* 200 0xc8 */
+	EXYNOS4X12_GPIO_Y51,
+	EXYNOS4X12_GPIO_Y52,
+	EXYNOS4X12_GPIO_Y53,
+	EXYNOS4X12_GPIO_Y54,
+	EXYNOS4X12_GPIO_Y55,
+	EXYNOS4X12_GPIO_Y56,
+	EXYNOS4X12_GPIO_Y57,
+	EXYNOS4X12_GPIO_Y60,		/* 208 0xd0 */
+	EXYNOS4X12_GPIO_Y61,
+	EXYNOS4X12_GPIO_Y62,
+	EXYNOS4X12_GPIO_Y63,
+	EXYNOS4X12_GPIO_Y64,
+	EXYNOS4X12_GPIO_Y65,
+	EXYNOS4X12_GPIO_Y66,
+	EXYNOS4X12_GPIO_Y67,
+	EXYNOS4X12_GPIO_MAX_PORT_PART_2_1, /* 216 0xd8 */
+	/* EXYNOS4X12_GPIO_PART2_2 starts here */
+	EXYNOS4X12_GPIO_M00 = EXYNOS4X12_GPIO_MAX_PORT_PART_2_1,
+	EXYNOS4X12_GPIO_M01,
+	EXYNOS4X12_GPIO_M02,
+	EXYNOS4X12_GPIO_M03,
+	EXYNOS4X12_GPIO_M04,
+	EXYNOS4X12_GPIO_M05,
+	EXYNOS4X12_GPIO_M06,
+	EXYNOS4X12_GPIO_M07,
+	EXYNOS4X12_GPIO_M10,		/* 224 0xe0 */
+	EXYNOS4X12_GPIO_M11,
+	EXYNOS4X12_GPIO_M12,
+	EXYNOS4X12_GPIO_M13,
+	EXYNOS4X12_GPIO_M14,
+	EXYNOS4X12_GPIO_M15,
+	EXYNOS4X12_GPIO_M16,
+	EXYNOS4X12_GPIO_M17,
+	EXYNOS4X12_GPIO_M20,		/* 232 0xe8 */
+	EXYNOS4X12_GPIO_M21,
+	EXYNOS4X12_GPIO_M22,
+	EXYNOS4X12_GPIO_M23,
+	EXYNOS4X12_GPIO_M24,
+	EXYNOS4X12_GPIO_M25,
+	EXYNOS4X12_GPIO_M26,
+	EXYNOS4X12_GPIO_M27,
+	EXYNOS4X12_GPIO_M30,		/* 240 0xf0 */
+	EXYNOS4X12_GPIO_M31,
+	EXYNOS4X12_GPIO_M32,
+	EXYNOS4X12_GPIO_M33,
+	EXYNOS4X12_GPIO_M34,
+	EXYNOS4X12_GPIO_M35,
+	EXYNOS4X12_GPIO_M36,
+	EXYNOS4X12_GPIO_M37,
+	EXYNOS4X12_GPIO_M40,		/* 248 0xf8 */
+	EXYNOS4X12_GPIO_M41,
+	EXYNOS4X12_GPIO_M42,
+	EXYNOS4X12_GPIO_M43,
+	EXYNOS4X12_GPIO_M44,
+	EXYNOS4X12_GPIO_M45,
+	EXYNOS4X12_GPIO_M46,
+	EXYNOS4X12_GPIO_M47,
+	EXYNOS4X12_GPIO_MAX_PORT_PART_2_2, /* 256 0x100 */
+	/* EXYNOS4X12_GPIO_PART2_3 starts here */
+	EXYNOS4X12_GPIO_X00 = EXYNOS4X12_GPIO_MAX_PORT_PART_2_2,
+	EXYNOS4X12_GPIO_X01,
+	EXYNOS4X12_GPIO_X02,
+	EXYNOS4X12_GPIO_X03,
+	EXYNOS4X12_GPIO_X04,
+	EXYNOS4X12_GPIO_X05,
+	EXYNOS4X12_GPIO_X06,
+	EXYNOS4X12_GPIO_X07,
+	EXYNOS4X12_GPIO_X10,		/* 264 0x108 */
+	EXYNOS4X12_GPIO_X11,
+	EXYNOS4X12_GPIO_X12,
+	EXYNOS4X12_GPIO_X13,
+	EXYNOS4X12_GPIO_X14,
+	EXYNOS4X12_GPIO_X15,
+	EXYNOS4X12_GPIO_X16,
+	EXYNOS4X12_GPIO_X17,
+	EXYNOS4X12_GPIO_X20,		/* 272 0x110 */
+	EXYNOS4X12_GPIO_X21,
+	EXYNOS4X12_GPIO_X22,
+	EXYNOS4X12_GPIO_X23,
+	EXYNOS4X12_GPIO_X24,
+	EXYNOS4X12_GPIO_X25,
+	EXYNOS4X12_GPIO_X26,
+	EXYNOS4X12_GPIO_X27,
+	EXYNOS4X12_GPIO_X30,		/* 280 0x118 */
+	EXYNOS4X12_GPIO_X31,
+	EXYNOS4X12_GPIO_X32,
+	EXYNOS4X12_GPIO_X33,
+	EXYNOS4X12_GPIO_X34,
+	EXYNOS4X12_GPIO_X35,
+	EXYNOS4X12_GPIO_X36,
+	EXYNOS4X12_GPIO_X37,
+
+	/* EXYNOS4X12_GPIO_PART3 starts here */
+	EXYNOS4X12_GPIO_MAX_PORT_PART_2_3, /* 288 0x120 */
+	EXYNOS4X12_GPIO_Z0 = EXYNOS4X12_GPIO_MAX_PORT_PART_2_3,
+	EXYNOS4X12_GPIO_Z1,
+	EXYNOS4X12_GPIO_Z2,
+	EXYNOS4X12_GPIO_Z3,
+	EXYNOS4X12_GPIO_Z4,
+	EXYNOS4X12_GPIO_Z5,
+	EXYNOS4X12_GPIO_Z6,
+	EXYNOS4X12_GPIO_Z7,
+
+	/* EXYNOS4X12_GPIO_PART4 starts here */
+	EXYNOS4X12_GPIO_MAX_PORT_PART_3,/* 296 0x128 */
+	EXYNOS4X12_GPIO_V00 = EXYNOS4X12_GPIO_MAX_PORT_PART_3,
+	EXYNOS4X12_GPIO_V01,
+	EXYNOS4X12_GPIO_V02,
+	EXYNOS4X12_GPIO_V03,
+	EXYNOS4X12_GPIO_V04,
+	EXYNOS4X12_GPIO_V05,
+	EXYNOS4X12_GPIO_V06,
+	EXYNOS4X12_GPIO_V07,
+	EXYNOS4X12_GPIO_V10,		/* 304 0x130 */
+	EXYNOS4X12_GPIO_V11,
+	EXYNOS4X12_GPIO_V12,
+	EXYNOS4X12_GPIO_V13,
+	EXYNOS4X12_GPIO_V14,
+	EXYNOS4X12_GPIO_V15,
+	EXYNOS4X12_GPIO_V16,
+	EXYNOS4X12_GPIO_V17,
+	EXYNOS4X12_GPIO_V20,		/* 312 0x138 */
+	EXYNOS4X12_GPIO_V21,
+	EXYNOS4X12_GPIO_V22,
+	EXYNOS4X12_GPIO_V23,
+	EXYNOS4X12_GPIO_V24,
+	EXYNOS4X12_GPIO_V25,
+	EXYNOS4X12_GPIO_V26,
+	EXYNOS4X12_GPIO_V27,
+	EXYNOS4X12_GPIO_V30,		/* 320 0x140 */
+	EXYNOS4X12_GPIO_V31,
+	EXYNOS4X12_GPIO_V32,
+	EXYNOS4X12_GPIO_V33,
+	EXYNOS4X12_GPIO_V34,
+	EXYNOS4X12_GPIO_V35,
+	EXYNOS4X12_GPIO_V36,
+	EXYNOS4X12_GPIO_V37,
+	EXYNOS4X12_GPIO_V40,		/* 328 0x148 */
+	EXYNOS4X12_GPIO_V41,
+	EXYNOS4X12_GPIO_V42,
+	EXYNOS4X12_GPIO_V43,
+	EXYNOS4X12_GPIO_V44,
+	EXYNOS4X12_GPIO_V45,
+	EXYNOS4X12_GPIO_V46,
+	EXYNOS4X12_GPIO_V47,
+
+	EXYNOS4X12_GPIO_MAX_PORT
+};
+
+enum exynos5_gpio_pin {
+	/* GPIO_PART1_STARTS */
+	EXYNOS5_GPIO_A00,		/* 0 */
+	EXYNOS5_GPIO_A01,
+	EXYNOS5_GPIO_A02,
+	EXYNOS5_GPIO_A03,
+	EXYNOS5_GPIO_A04,
+	EXYNOS5_GPIO_A05,
+	EXYNOS5_GPIO_A06,
+	EXYNOS5_GPIO_A07,
+	EXYNOS5_GPIO_A10,		/* 8 */
+	EXYNOS5_GPIO_A11,
+	EXYNOS5_GPIO_A12,
+	EXYNOS5_GPIO_A13,
+	EXYNOS5_GPIO_A14,
+	EXYNOS5_GPIO_A15,
+	EXYNOS5_GPIO_A16,
+	EXYNOS5_GPIO_A17,
+	EXYNOS5_GPIO_A20,		/* 16 0x10 */
+	EXYNOS5_GPIO_A21,
+	EXYNOS5_GPIO_A22,
+	EXYNOS5_GPIO_A23,
+	EXYNOS5_GPIO_A24,
+	EXYNOS5_GPIO_A25,
+	EXYNOS5_GPIO_A26,
+	EXYNOS5_GPIO_A27,
+	EXYNOS5_GPIO_B00,		/* 24 0x18 */
+	EXYNOS5_GPIO_B01,
+	EXYNOS5_GPIO_B02,
+	EXYNOS5_GPIO_B03,
+	EXYNOS5_GPIO_B04,
+	EXYNOS5_GPIO_B05,
+	EXYNOS5_GPIO_B06,
+	EXYNOS5_GPIO_B07,
+	EXYNOS5_GPIO_B10,		/* 32 0x20 */
+	EXYNOS5_GPIO_B11,
+	EXYNOS5_GPIO_B12,
+	EXYNOS5_GPIO_B13,
+	EXYNOS5_GPIO_B14,
+	EXYNOS5_GPIO_B15,
+	EXYNOS5_GPIO_B16,
+	EXYNOS5_GPIO_B17,
+	EXYNOS5_GPIO_B20,		/* 40 0x28 */
+	EXYNOS5_GPIO_B21,
+	EXYNOS5_GPIO_B22,
+	EXYNOS5_GPIO_B23,
+	EXYNOS5_GPIO_B24,
+	EXYNOS5_GPIO_B25,
+	EXYNOS5_GPIO_B26,
+	EXYNOS5_GPIO_B27,
+	EXYNOS5_GPIO_B30,		/* 48 0x39 */
+	EXYNOS5_GPIO_B31,
+	EXYNOS5_GPIO_B32,
+	EXYNOS5_GPIO_B33,
+	EXYNOS5_GPIO_B34,
+	EXYNOS5_GPIO_B35,
+	EXYNOS5_GPIO_B36,
+	EXYNOS5_GPIO_B37,
+	EXYNOS5_GPIO_C00,		/* 56 0x38 */
+	EXYNOS5_GPIO_C01,
+	EXYNOS5_GPIO_C02,
+	EXYNOS5_GPIO_C03,
+	EXYNOS5_GPIO_C04,
+	EXYNOS5_GPIO_C05,
+	EXYNOS5_GPIO_C06,
+	EXYNOS5_GPIO_C07,
+	EXYNOS5_GPIO_C10,		/* 64 0x40 */
+	EXYNOS5_GPIO_C11,
+	EXYNOS5_GPIO_C12,
+	EXYNOS5_GPIO_C13,
+	EXYNOS5_GPIO_C14,
+	EXYNOS5_GPIO_C15,
+	EXYNOS5_GPIO_C16,
+	EXYNOS5_GPIO_C17,
+	EXYNOS5_GPIO_C20,		/* 72 0x48 */
+	EXYNOS5_GPIO_C21,
+	EXYNOS5_GPIO_C22,
+	EXYNOS5_GPIO_C23,
+	EXYNOS5_GPIO_C24,
+	EXYNOS5_GPIO_C25,
+	EXYNOS5_GPIO_C26,
+	EXYNOS5_GPIO_C27,
+	EXYNOS5_GPIO_C30,		/* 80 0x50 */
+	EXYNOS5_GPIO_C31,
+	EXYNOS5_GPIO_C32,
+	EXYNOS5_GPIO_C33,
+	EXYNOS5_GPIO_C34,
+	EXYNOS5_GPIO_C35,
+	EXYNOS5_GPIO_C36,
+	EXYNOS5_GPIO_C37,
+	EXYNOS5_GPIO_D00,		/* 88 0x58 */
+	EXYNOS5_GPIO_D01,
+	EXYNOS5_GPIO_D02,
+	EXYNOS5_GPIO_D03,
+	EXYNOS5_GPIO_D04,
+	EXYNOS5_GPIO_D05,
+	EXYNOS5_GPIO_D06,
+	EXYNOS5_GPIO_D07,
+	EXYNOS5_GPIO_D10,		/* 96 0x60 */
+	EXYNOS5_GPIO_D11,
+	EXYNOS5_GPIO_D12,
+	EXYNOS5_GPIO_D13,
+	EXYNOS5_GPIO_D14,
+	EXYNOS5_GPIO_D15,
+	EXYNOS5_GPIO_D16,
+	EXYNOS5_GPIO_D17,
+	EXYNOS5_GPIO_Y00,		/* 104 0x68 */
+	EXYNOS5_GPIO_Y01,
+	EXYNOS5_GPIO_Y02,
+	EXYNOS5_GPIO_Y03,
+	EXYNOS5_GPIO_Y04,
+	EXYNOS5_GPIO_Y05,
+	EXYNOS5_GPIO_Y06,
+	EXYNOS5_GPIO_Y07,
+	EXYNOS5_GPIO_Y10,		/* 112 0x70 */
+	EXYNOS5_GPIO_Y11,
+	EXYNOS5_GPIO_Y12,
+	EXYNOS5_GPIO_Y13,
+	EXYNOS5_GPIO_Y14,
+	EXYNOS5_GPIO_Y15,
+	EXYNOS5_GPIO_Y16,
+	EXYNOS5_GPIO_Y17,
+	EXYNOS5_GPIO_Y20,		/* 120 0x78 */
+	EXYNOS5_GPIO_Y21,
+	EXYNOS5_GPIO_Y22,
+	EXYNOS5_GPIO_Y23,
+	EXYNOS5_GPIO_Y24,
+	EXYNOS5_GPIO_Y25,
+	EXYNOS5_GPIO_Y26,
+	EXYNOS5_GPIO_Y27,
+	EXYNOS5_GPIO_Y30,		/* 128 0x80 */
+	EXYNOS5_GPIO_Y31,
+	EXYNOS5_GPIO_Y32,
+	EXYNOS5_GPIO_Y33,
+	EXYNOS5_GPIO_Y34,
+	EXYNOS5_GPIO_Y35,
+	EXYNOS5_GPIO_Y36,
+	EXYNOS5_GPIO_Y37,
+	EXYNOS5_GPIO_Y40,		/* 136 0x88 */
+	EXYNOS5_GPIO_Y41,
+	EXYNOS5_GPIO_Y42,
+	EXYNOS5_GPIO_Y43,
+	EXYNOS5_GPIO_Y44,
+	EXYNOS5_GPIO_Y45,
+	EXYNOS5_GPIO_Y46,
+	EXYNOS5_GPIO_Y47,
+	EXYNOS5_GPIO_Y50,		/* 144 0x90 */
+	EXYNOS5_GPIO_Y51,
+	EXYNOS5_GPIO_Y52,
+	EXYNOS5_GPIO_Y53,
+	EXYNOS5_GPIO_Y54,
+	EXYNOS5_GPIO_Y55,
+	EXYNOS5_GPIO_Y56,
+	EXYNOS5_GPIO_Y57,
+	EXYNOS5_GPIO_Y60,		/* 152 0x98 */
+	EXYNOS5_GPIO_Y61,
+	EXYNOS5_GPIO_Y62,
+	EXYNOS5_GPIO_Y63,
+	EXYNOS5_GPIO_Y64,
+	EXYNOS5_GPIO_Y65,
+	EXYNOS5_GPIO_Y66,
+	EXYNOS5_GPIO_Y67,
+
+	/* GPIO_PART2_STARTS */
+	EXYNOS5_GPIO_MAX_PORT_PART_1,	/* 160 0xa0 */
+	EXYNOS5_GPIO_C40 = EXYNOS5_GPIO_MAX_PORT_PART_1,
+	EXYNOS5_GPIO_C41,
+	EXYNOS5_GPIO_C42,
+	EXYNOS5_GPIO_C43,
+	EXYNOS5_GPIO_C44,
+	EXYNOS5_GPIO_C45,
+	EXYNOS5_GPIO_C46,
+	EXYNOS5_GPIO_C47,
+
+	/* GPIO_PART3_STARTS */
+	EXYNOS5_GPIO_MAX_PORT_PART_2,	/* 168 0xa8 */
+	EXYNOS5_GPIO_X00 = EXYNOS5_GPIO_MAX_PORT_PART_2,
+	EXYNOS5_GPIO_X01,
+	EXYNOS5_GPIO_X02,
+	EXYNOS5_GPIO_X03,
+	EXYNOS5_GPIO_X04,
+	EXYNOS5_GPIO_X05,
+	EXYNOS5_GPIO_X06,
+	EXYNOS5_GPIO_X07,
+	EXYNOS5_GPIO_X10,		/* 176 0xb0 */
+	EXYNOS5_GPIO_X11,
+	EXYNOS5_GPIO_X12,
+	EXYNOS5_GPIO_X13,
+	EXYNOS5_GPIO_X14,
+	EXYNOS5_GPIO_X15,
+	EXYNOS5_GPIO_X16,
+	EXYNOS5_GPIO_X17,
+	EXYNOS5_GPIO_X20,		/* 184 0xb8 */
+	EXYNOS5_GPIO_X21,
+	EXYNOS5_GPIO_X22,
+	EXYNOS5_GPIO_X23,
+	EXYNOS5_GPIO_X24,
+	EXYNOS5_GPIO_X25,
+	EXYNOS5_GPIO_X26,
+	EXYNOS5_GPIO_X27,
+	EXYNOS5_GPIO_X30,		/* 192 0xc0 */
+	EXYNOS5_GPIO_X31,
+	EXYNOS5_GPIO_X32,
+	EXYNOS5_GPIO_X33,
+	EXYNOS5_GPIO_X34,
+	EXYNOS5_GPIO_X35,
+	EXYNOS5_GPIO_X36,
+	EXYNOS5_GPIO_X37,
+
+	/* GPIO_PART4_STARTS */
+	EXYNOS5_GPIO_MAX_PORT_PART_3,	/* 200 0xc8 */
+	EXYNOS5_GPIO_E00 = EXYNOS5_GPIO_MAX_PORT_PART_3,
+	EXYNOS5_GPIO_E01,
+	EXYNOS5_GPIO_E02,
+	EXYNOS5_GPIO_E03,
+	EXYNOS5_GPIO_E04,
+	EXYNOS5_GPIO_E05,
+	EXYNOS5_GPIO_E06,
+	EXYNOS5_GPIO_E07,
+	EXYNOS5_GPIO_E10,		/* 208 0xd0 */
+	EXYNOS5_GPIO_E11,
+	EXYNOS5_GPIO_E12,
+	EXYNOS5_GPIO_E13,
+	EXYNOS5_GPIO_E14,
+	EXYNOS5_GPIO_E15,
+	EXYNOS5_GPIO_E16,
+	EXYNOS5_GPIO_E17,
+	EXYNOS5_GPIO_F00,		/* 216 0xd8 */
+	EXYNOS5_GPIO_F01,
+	EXYNOS5_GPIO_F02,
+	EXYNOS5_GPIO_F03,
+	EXYNOS5_GPIO_F04,
+	EXYNOS5_GPIO_F05,
+	EXYNOS5_GPIO_F06,
+	EXYNOS5_GPIO_F07,
+	EXYNOS5_GPIO_F10,		/* 224 0xe0 */
+	EXYNOS5_GPIO_F11,
+	EXYNOS5_GPIO_F12,
+	EXYNOS5_GPIO_F13,
+	EXYNOS5_GPIO_F14,
+	EXYNOS5_GPIO_F15,
+	EXYNOS5_GPIO_F16,
+	EXYNOS5_GPIO_F17,
+	EXYNOS5_GPIO_G00,		/* 232 0xe8 */
+	EXYNOS5_GPIO_G01,
+	EXYNOS5_GPIO_G02,
+	EXYNOS5_GPIO_G03,
+	EXYNOS5_GPIO_G04,
+	EXYNOS5_GPIO_G05,
+	EXYNOS5_GPIO_G06,
+	EXYNOS5_GPIO_G07,
+	EXYNOS5_GPIO_G10,		/* 240 0xf0 */
+	EXYNOS5_GPIO_G11,
+	EXYNOS5_GPIO_G12,
+	EXYNOS5_GPIO_G13,
+	EXYNOS5_GPIO_G14,
+	EXYNOS5_GPIO_G15,
+	EXYNOS5_GPIO_G16,
+	EXYNOS5_GPIO_G17,
+	EXYNOS5_GPIO_G20,		/* 248 0xf8 */
+	EXYNOS5_GPIO_G21,
+	EXYNOS5_GPIO_G22,
+	EXYNOS5_GPIO_G23,
+	EXYNOS5_GPIO_G24,
+	EXYNOS5_GPIO_G25,
+	EXYNOS5_GPIO_G26,
+	EXYNOS5_GPIO_G27,
+	EXYNOS5_GPIO_H00,		/* 256 0x100 */
+	EXYNOS5_GPIO_H01,
+	EXYNOS5_GPIO_H02,
+	EXYNOS5_GPIO_H03,
+	EXYNOS5_GPIO_H04,
+	EXYNOS5_GPIO_H05,
+	EXYNOS5_GPIO_H06,
+	EXYNOS5_GPIO_H07,
+	EXYNOS5_GPIO_H10,		/* 264 0x108 */
+	EXYNOS5_GPIO_H11,
+	EXYNOS5_GPIO_H12,
+	EXYNOS5_GPIO_H13,
+	EXYNOS5_GPIO_H14,
+	EXYNOS5_GPIO_H15,
+	EXYNOS5_GPIO_H16,
+	EXYNOS5_GPIO_H17,
+
+	/* GPIO_PART4_STARTS */
+	EXYNOS5_GPIO_MAX_PORT_PART_4,	/* 272 0x110 */
+	EXYNOS5_GPIO_V00 = EXYNOS5_GPIO_MAX_PORT_PART_4,
+	EXYNOS5_GPIO_V01,
+	EXYNOS5_GPIO_V02,
+	EXYNOS5_GPIO_V03,
+	EXYNOS5_GPIO_V04,
+	EXYNOS5_GPIO_V05,
+	EXYNOS5_GPIO_V06,
+	EXYNOS5_GPIO_V07,
+	EXYNOS5_GPIO_V10,		/* 280 0x118 */
+	EXYNOS5_GPIO_V11,
+	EXYNOS5_GPIO_V12,
+	EXYNOS5_GPIO_V13,
+	EXYNOS5_GPIO_V14,
+	EXYNOS5_GPIO_V15,
+	EXYNOS5_GPIO_V16,
+	EXYNOS5_GPIO_V17,
+
+	/* GPIO_PART5_STARTS */
+	EXYNOS5_GPIO_MAX_PORT_PART_5,	/* 288 0x120 */
+	EXYNOS5_GPIO_V20 = EXYNOS5_GPIO_MAX_PORT_PART_5,
+	EXYNOS5_GPIO_V21,
+	EXYNOS5_GPIO_V22,
+	EXYNOS5_GPIO_V23,
+	EXYNOS5_GPIO_V24,
+	EXYNOS5_GPIO_V25,
+	EXYNOS5_GPIO_V26,
+	EXYNOS5_GPIO_V27,
+	EXYNOS5_GPIO_V30,		/* 296 0x128 */
+	EXYNOS5_GPIO_V31,
+	EXYNOS5_GPIO_V32,
+	EXYNOS5_GPIO_V33,
+	EXYNOS5_GPIO_V34,
+	EXYNOS5_GPIO_V35,
+	EXYNOS5_GPIO_V36,
+	EXYNOS5_GPIO_V37,
+
+	/* GPIO_PART6_STARTS */
+	EXYNOS5_GPIO_MAX_PORT_PART_6,	/* 304 0x130 */
+	EXYNOS5_GPIO_V40 = EXYNOS5_GPIO_MAX_PORT_PART_6,
+	EXYNOS5_GPIO_V41,
+	EXYNOS5_GPIO_V42,
+	EXYNOS5_GPIO_V43,
+	EXYNOS5_GPIO_V44,
+	EXYNOS5_GPIO_V45,
+	EXYNOS5_GPIO_V46,
+	EXYNOS5_GPIO_V47,
+
+	/* GPIO_PART7_STARTS */		/* 312 0x138 */
+	EXYNOS5_GPIO_MAX_PORT_PART_7,
+	EXYNOS5_GPIO_Z0 = EXYNOS5_GPIO_MAX_PORT_PART_7,
+	EXYNOS5_GPIO_Z1,
+	EXYNOS5_GPIO_Z2,
+	EXYNOS5_GPIO_Z3,
+	EXYNOS5_GPIO_Z4,
+	EXYNOS5_GPIO_Z5,
+	EXYNOS5_GPIO_Z6,
+	EXYNOS5_GPIO_MAX_PORT
+};
+
+enum exynos5420_gpio_pin {
+	/* GPIO_PART1_STARTS */
+	EXYNOS5420_GPIO_A00,		/* 0 */
+	EXYNOS5420_GPIO_A01,
+	EXYNOS5420_GPIO_A02,
+	EXYNOS5420_GPIO_A03,
+	EXYNOS5420_GPIO_A04,
+	EXYNOS5420_GPIO_A05,
+	EXYNOS5420_GPIO_A06,
+	EXYNOS5420_GPIO_A07,
+	EXYNOS5420_GPIO_A10,		/* 8 */
+	EXYNOS5420_GPIO_A11,
+	EXYNOS5420_GPIO_A12,
+	EXYNOS5420_GPIO_A13,
+	EXYNOS5420_GPIO_A14,
+	EXYNOS5420_GPIO_A15,
+	EXYNOS5420_GPIO_A16,
+	EXYNOS5420_GPIO_A17,
+	EXYNOS5420_GPIO_A20,		/* 16 0x10 */
+	EXYNOS5420_GPIO_A21,
+	EXYNOS5420_GPIO_A22,
+	EXYNOS5420_GPIO_A23,
+	EXYNOS5420_GPIO_A24,
+	EXYNOS5420_GPIO_A25,
+	EXYNOS5420_GPIO_A26,
+	EXYNOS5420_GPIO_A27,
+	EXYNOS5420_GPIO_B00,		/* 24 0x18 */
+	EXYNOS5420_GPIO_B01,
+	EXYNOS5420_GPIO_B02,
+	EXYNOS5420_GPIO_B03,
+	EXYNOS5420_GPIO_B04,
+	EXYNOS5420_GPIO_B05,
+	EXYNOS5420_GPIO_B06,
+	EXYNOS5420_GPIO_B07,
+	EXYNOS5420_GPIO_B10,		/* 32 0x20 */
+	EXYNOS5420_GPIO_B11,
+	EXYNOS5420_GPIO_B12,
+	EXYNOS5420_GPIO_B13,
+	EXYNOS5420_GPIO_B14,
+	EXYNOS5420_GPIO_B15,
+	EXYNOS5420_GPIO_B16,
+	EXYNOS5420_GPIO_B17,
+	EXYNOS5420_GPIO_B20,		/* 40 0x28 */
+	EXYNOS5420_GPIO_B21,
+	EXYNOS5420_GPIO_B22,
+	EXYNOS5420_GPIO_B23,
+	EXYNOS5420_GPIO_B24,
+	EXYNOS5420_GPIO_B25,
+	EXYNOS5420_GPIO_B26,
+	EXYNOS5420_GPIO_B27,
+	EXYNOS5420_GPIO_B30,		/* 48 0x30 */
+	EXYNOS5420_GPIO_B31,
+	EXYNOS5420_GPIO_B32,
+	EXYNOS5420_GPIO_B33,
+	EXYNOS5420_GPIO_B34,
+	EXYNOS5420_GPIO_B35,
+	EXYNOS5420_GPIO_B36,
+	EXYNOS5420_GPIO_B37,
+	EXYNOS5420_GPIO_B40,		/* 56 0x38 */
+	EXYNOS5420_GPIO_B41,
+	EXYNOS5420_GPIO_B42,
+	EXYNOS5420_GPIO_B43,
+	EXYNOS5420_GPIO_B44,
+	EXYNOS5420_GPIO_B45,
+	EXYNOS5420_GPIO_B46,
+	EXYNOS5420_GPIO_B47,
+	EXYNOS5420_GPIO_H00,		/* 64 0x40 */
+	EXYNOS5420_GPIO_H01,
+	EXYNOS5420_GPIO_H02,
+	EXYNOS5420_GPIO_H03,
+	EXYNOS5420_GPIO_H04,
+	EXYNOS5420_GPIO_H05,
+	EXYNOS5420_GPIO_H06,
+	EXYNOS5420_GPIO_H07,
+
+	/* GPIO PART 2 STARTS*/
+	EXYNOS5420_GPIO_MAX_PORT_PART_1,/* 72 0x48 */
+	EXYNOS5420_GPIO_Y70 = EXYNOS5420_GPIO_MAX_PORT_PART_1,
+	EXYNOS5420_GPIO_Y71,
+	EXYNOS5420_GPIO_Y72,
+	EXYNOS5420_GPIO_Y73,
+	EXYNOS5420_GPIO_Y74,
+	EXYNOS5420_GPIO_Y75,
+	EXYNOS5420_GPIO_Y76,
+	EXYNOS5420_GPIO_Y77,
+
+	/* GPIO PART 3 STARTS*/
+	EXYNOS5420_GPIO_MAX_PORT_PART_2,/* 80 0x50 */
+	EXYNOS5420_GPIO_X00 = EXYNOS5420_GPIO_MAX_PORT_PART_2,
+	EXYNOS5420_GPIO_X01,
+	EXYNOS5420_GPIO_X02,
+	EXYNOS5420_GPIO_X03,
+	EXYNOS5420_GPIO_X04,
+	EXYNOS5420_GPIO_X05,
+	EXYNOS5420_GPIO_X06,
+	EXYNOS5420_GPIO_X07,
+	EXYNOS5420_GPIO_X10,		/* 88 0x58 */
+	EXYNOS5420_GPIO_X11,
+	EXYNOS5420_GPIO_X12,
+	EXYNOS5420_GPIO_X13,
+	EXYNOS5420_GPIO_X14,
+	EXYNOS5420_GPIO_X15,
+	EXYNOS5420_GPIO_X16,
+	EXYNOS5420_GPIO_X17,
+	EXYNOS5420_GPIO_X20,		/* 96 0x60 */
+	EXYNOS5420_GPIO_X21,
+	EXYNOS5420_GPIO_X22,
+	EXYNOS5420_GPIO_X23,
+	EXYNOS5420_GPIO_X24,
+	EXYNOS5420_GPIO_X25,
+	EXYNOS5420_GPIO_X26,
+	EXYNOS5420_GPIO_X27,
+	EXYNOS5420_GPIO_X30,		/* 104 0x68 */
+	EXYNOS5420_GPIO_X31,
+	EXYNOS5420_GPIO_X32,
+	EXYNOS5420_GPIO_X33,
+	EXYNOS5420_GPIO_X34,
+	EXYNOS5420_GPIO_X35,
+	EXYNOS5420_GPIO_X36,
+	EXYNOS5420_GPIO_X37,
+
+	/* GPIO PART 4 STARTS*/
+	EXYNOS5420_GPIO_MAX_PORT_PART_3,/* 112 0x70 */
+	EXYNOS5420_GPIO_C00 = EXYNOS5420_GPIO_MAX_PORT_PART_3,
+	EXYNOS5420_GPIO_C01,
+	EXYNOS5420_GPIO_C02,
+	EXYNOS5420_GPIO_C03,
+	EXYNOS5420_GPIO_C04,
+	EXYNOS5420_GPIO_C05,
+	EXYNOS5420_GPIO_C06,
+	EXYNOS5420_GPIO_C07,
+	EXYNOS5420_GPIO_C10,		/* 120 0x78 */
+	EXYNOS5420_GPIO_C11,
+	EXYNOS5420_GPIO_C12,
+	EXYNOS5420_GPIO_C13,
+	EXYNOS5420_GPIO_C14,
+	EXYNOS5420_GPIO_C15,
+	EXYNOS5420_GPIO_C16,
+	EXYNOS5420_GPIO_C17,
+	EXYNOS5420_GPIO_C20,		/* 128 0x80 */
+	EXYNOS5420_GPIO_C21,
+	EXYNOS5420_GPIO_C22,
+	EXYNOS5420_GPIO_C23,
+	EXYNOS5420_GPIO_C24,
+	EXYNOS5420_GPIO_C25,
+	EXYNOS5420_GPIO_C26,
+	EXYNOS5420_GPIO_C27,
+	EXYNOS5420_GPIO_C30,		/* 136 0x88 */
+	EXYNOS5420_GPIO_C31,
+	EXYNOS5420_GPIO_C32,
+	EXYNOS5420_GPIO_C33,
+	EXYNOS5420_GPIO_C34,
+	EXYNOS5420_GPIO_C35,
+	EXYNOS5420_GPIO_C36,
+	EXYNOS5420_GPIO_C37,
+	EXYNOS5420_GPIO_C40,		/* 144 0x90 */
+	EXYNOS5420_GPIO_C41,
+	EXYNOS5420_GPIO_C42,
+	EXYNOS5420_GPIO_C43,
+	EXYNOS5420_GPIO_C44,
+	EXYNOS5420_GPIO_C45,
+	EXYNOS5420_GPIO_C46,
+	EXYNOS5420_GPIO_C47,
+	EXYNOS5420_GPIO_D10,		/* 152 0x98 */
+	EXYNOS5420_GPIO_D11,
+	EXYNOS5420_GPIO_D12,
+	EXYNOS5420_GPIO_D13,
+	EXYNOS5420_GPIO_D14,
+	EXYNOS5420_GPIO_D15,
+	EXYNOS5420_GPIO_D16,
+	EXYNOS5420_GPIO_D17,
+	EXYNOS5420_GPIO_Y00,		/* 160 0xa0 */
+	EXYNOS5420_GPIO_Y01,
+	EXYNOS5420_GPIO_Y02,
+	EXYNOS5420_GPIO_Y03,
+	EXYNOS5420_GPIO_Y04,
+	EXYNOS5420_GPIO_Y05,
+	EXYNOS5420_GPIO_Y06,
+	EXYNOS5420_GPIO_Y07,
+	EXYNOS5420_GPIO_Y10,		/* 168 0xa8 */
+	EXYNOS5420_GPIO_Y11,
+	EXYNOS5420_GPIO_Y12,
+	EXYNOS5420_GPIO_Y13,
+	EXYNOS5420_GPIO_Y14,
+	EXYNOS5420_GPIO_Y15,
+	EXYNOS5420_GPIO_Y16,
+	EXYNOS5420_GPIO_Y17,
+	EXYNOS5420_GPIO_Y20,		/* 176 0xb0 */
+	EXYNOS5420_GPIO_Y21,
+	EXYNOS5420_GPIO_Y22,
+	EXYNOS5420_GPIO_Y23,
+	EXYNOS5420_GPIO_Y24,
+	EXYNOS5420_GPIO_Y25,
+	EXYNOS5420_GPIO_Y26,
+	EXYNOS5420_GPIO_Y27,
+	EXYNOS5420_GPIO_Y30,		/* 184 0xb8 */
+	EXYNOS5420_GPIO_Y31,
+	EXYNOS5420_GPIO_Y32,
+	EXYNOS5420_GPIO_Y33,
+	EXYNOS5420_GPIO_Y34,
+	EXYNOS5420_GPIO_Y35,
+	EXYNOS5420_GPIO_Y36,
+	EXYNOS5420_GPIO_Y37,
+	EXYNOS5420_GPIO_Y40,		/* 192 0xc0 */
+	EXYNOS5420_GPIO_Y41,
+	EXYNOS5420_GPIO_Y42,
+	EXYNOS5420_GPIO_Y43,
+	EXYNOS5420_GPIO_Y44,
+	EXYNOS5420_GPIO_Y45,
+	EXYNOS5420_GPIO_Y46,
+	EXYNOS5420_GPIO_Y47,
+	EXYNOS5420_GPIO_Y50,		/* 200 0xc8 */
+	EXYNOS5420_GPIO_Y51,
+	EXYNOS5420_GPIO_Y52,
+	EXYNOS5420_GPIO_Y53,
+	EXYNOS5420_GPIO_Y54,
+	EXYNOS5420_GPIO_Y55,
+	EXYNOS5420_GPIO_Y56,
+	EXYNOS5420_GPIO_Y57,
+	EXYNOS5420_GPIO_Y60,		/* 208 0xd0 */
+	EXYNOS5420_GPIO_Y61,
+	EXYNOS5420_GPIO_Y62,
+	EXYNOS5420_GPIO_Y63,
+	EXYNOS5420_GPIO_Y64,
+	EXYNOS5420_GPIO_Y65,
+	EXYNOS5420_GPIO_Y66,
+	EXYNOS5420_GPIO_Y67,
+
+	/* GPIO_PART5_STARTS */
+	EXYNOS5420_GPIO_MAX_PORT_PART_4,/* 216 0xd8 */
+	EXYNOS5420_GPIO_E00 = EXYNOS5420_GPIO_MAX_PORT_PART_4,
+	EXYNOS5420_GPIO_E01,
+	EXYNOS5420_GPIO_E02,
+	EXYNOS5420_GPIO_E03,
+	EXYNOS5420_GPIO_E04,
+	EXYNOS5420_GPIO_E05,
+	EXYNOS5420_GPIO_E06,
+	EXYNOS5420_GPIO_E07,
+	EXYNOS5420_GPIO_E10,		/* 224 0xe0 */
+	EXYNOS5420_GPIO_E11,
+	EXYNOS5420_GPIO_E12,
+	EXYNOS5420_GPIO_E13,
+	EXYNOS5420_GPIO_E14,
+	EXYNOS5420_GPIO_E15,
+	EXYNOS5420_GPIO_E16,
+	EXYNOS5420_GPIO_E17,
+	EXYNOS5420_GPIO_F00,		/* 232 0xe8 */
+	EXYNOS5420_GPIO_F01,
+	EXYNOS5420_GPIO_F02,
+	EXYNOS5420_GPIO_F03,
+	EXYNOS5420_GPIO_F04,
+	EXYNOS5420_GPIO_F05,
+	EXYNOS5420_GPIO_F06,
+	EXYNOS5420_GPIO_F07,
+	EXYNOS5420_GPIO_F10,		/* 240 0xf0 */
+	EXYNOS5420_GPIO_F11,
+	EXYNOS5420_GPIO_F12,
+	EXYNOS5420_GPIO_F13,
+	EXYNOS5420_GPIO_F14,
+	EXYNOS5420_GPIO_F15,
+	EXYNOS5420_GPIO_F16,
+	EXYNOS5420_GPIO_F17,
+	EXYNOS5420_GPIO_G00,		/* 248 0xf8 */
+	EXYNOS5420_GPIO_G01,
+	EXYNOS5420_GPIO_G02,
+	EXYNOS5420_GPIO_G03,
+	EXYNOS5420_GPIO_G04,
+	EXYNOS5420_GPIO_G05,
+	EXYNOS5420_GPIO_G06,
+	EXYNOS5420_GPIO_G07,
+	EXYNOS5420_GPIO_G10,		/* 256 0x100 */
+	EXYNOS5420_GPIO_G11,
+	EXYNOS5420_GPIO_G12,
+	EXYNOS5420_GPIO_G13,
+	EXYNOS5420_GPIO_G14,
+	EXYNOS5420_GPIO_G15,
+	EXYNOS5420_GPIO_G16,
+	EXYNOS5420_GPIO_G17,
+	EXYNOS5420_GPIO_G20,		/* 264 0x108 */
+	EXYNOS5420_GPIO_G21,
+	EXYNOS5420_GPIO_G22,
+	EXYNOS5420_GPIO_G23,
+	EXYNOS5420_GPIO_G24,
+	EXYNOS5420_GPIO_G25,
+	EXYNOS5420_GPIO_G26,
+	EXYNOS5420_GPIO_G27,
+	EXYNOS5420_GPIO_J40,		/* 272 0x110 */
+	EXYNOS5420_GPIO_J41,
+	EXYNOS5420_GPIO_J42,
+	EXYNOS5420_GPIO_J43,
+	EXYNOS5420_GPIO_J44,
+	EXYNOS5420_GPIO_J45,
+	EXYNOS5420_GPIO_J46,
+	EXYNOS5420_GPIO_J47,
+
+	/* GPIO_PART6_STARTS */
+	EXYNOS5420_GPIO_MAX_PORT_PART_5,/* 280 0x118 */
+	EXYNOS5420_GPIO_Z0 = EXYNOS5420_GPIO_MAX_PORT_PART_5,
+	EXYNOS5420_GPIO_Z1,
+	EXYNOS5420_GPIO_Z2,
+	EXYNOS5420_GPIO_Z3,
+	EXYNOS5420_GPIO_Z4,
+	EXYNOS5420_GPIO_Z5,
+	EXYNOS5420_GPIO_Z6,
+	EXYNOS5420_GPIO_MAX_PORT
+};
+
+struct gpio_info {
+	unsigned long reg_addr;	/* Address of register for this part */
+	unsigned int max_gpio;	/* Maximum GPIO in this part */
+};
+
+#define EXYNOS4_GPIO_NUM_PARTS	4
+static struct gpio_info exynos4_gpio_data[EXYNOS4_GPIO_NUM_PARTS] = {
+	{ EXYNOS4_GPIO_PART1_BASE, EXYNOS4_GPIO_MAX_PORT_PART_1 },
+	{ EXYNOS4_GPIO_PART2_0, EXYNOS4_GPIO_MAX_PORT_PART_2_0 },
+	{ EXYNOS4_GPIO_PART2_1, EXYNOS4_GPIO_MAX_PORT_PART_2_1 },
+	{ EXYNOS4_GPIO_PART3_BASE, EXYNOS4_GPIO_MAX_PORT },
+};
+
+#define EXYNOS4X12_GPIO_NUM_PARTS	8
+static struct gpio_info exynos4x12_gpio_data[EXYNOS4X12_GPIO_NUM_PARTS] = {
+	{ EXYNOS4X12_GPIO_PART1_0, EXYNOS4X12_GPIO_MAX_PORT_PART_1_0 },
+	{ EXYNOS4X12_GPIO_PART1_1, EXYNOS4X12_GPIO_MAX_PORT_PART_1_1 },
+	{ EXYNOS4X12_GPIO_PART1_2, EXYNOS4X12_GPIO_MAX_PORT_PART_1_2 },
+	{ EXYNOS4X12_GPIO_PART2_1, EXYNOS4X12_GPIO_MAX_PORT_PART_2_1 },
+	{ EXYNOS4X12_GPIO_PART2_2, EXYNOS4X12_GPIO_MAX_PORT_PART_2_2 },
+	{ EXYNOS4X12_GPIO_PART2_3, EXYNOS4X12_GPIO_MAX_PORT_PART_2_3 },
+	{ EXYNOS4X12_GPIO_PART3_BASE, EXYNOS4X12_GPIO_MAX_PORT_PART_3 },
+	{ EXYNOS4X12_GPIO_PART4_BASE, EXYNOS4X12_GPIO_MAX_PORT },
+};
+
+#define EXYNOS5_GPIO_NUM_PARTS	8
+static struct gpio_info exynos5_gpio_data[EXYNOS5_GPIO_NUM_PARTS] = {
+	{ EXYNOS5_GPIO_PART1_BASE, EXYNOS5_GPIO_MAX_PORT_PART_1 },
+	{ EXYNOS5_GPIO_PART2_BASE, EXYNOS5_GPIO_MAX_PORT_PART_2 },
+	{ EXYNOS5_GPIO_PART3_BASE, EXYNOS5_GPIO_MAX_PORT_PART_3 },
+	{ EXYNOS5_GPIO_PART4_BASE, EXYNOS5_GPIO_MAX_PORT_PART_4 },
+	{ EXYNOS5_GPIO_PART5_BASE, EXYNOS5_GPIO_MAX_PORT_PART_5 },
+	{ EXYNOS5_GPIO_PART6_BASE, EXYNOS5_GPIO_MAX_PORT_PART_6 },
+	{ EXYNOS5_GPIO_PART7_BASE, EXYNOS5_GPIO_MAX_PORT_PART_7 },
+	{ EXYNOS5_GPIO_PART8_BASE, EXYNOS5_GPIO_MAX_PORT },
+};
+
+#define EXYNOS5420_GPIO_NUM_PARTS	6
+static struct gpio_info exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] = {
+	{ EXYNOS5420_GPIO_PART1_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_1 },
+	{ EXYNOS5420_GPIO_PART2_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_2 },
+	{ EXYNOS5420_GPIO_PART3_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_3 },
+	{ EXYNOS5420_GPIO_PART4_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_4 },
+	{ EXYNOS5420_GPIO_PART5_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_5 },
+	{ EXYNOS5420_GPIO_PART6_BASE, EXYNOS5420_GPIO_MAX_PORT },
+};
+
+static inline struct gpio_info *get_gpio_data(void)
+{
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			return exynos5420_gpio_data;
+		else
+			return exynos5_gpio_data;
+	} else if (cpu_is_exynos4()) {
+		if (proid_is_exynos4412())
+			return exynos4x12_gpio_data;
+		else
+			return exynos4_gpio_data;
+	}
+
+	return NULL;
+}
+
+static inline unsigned int get_bank_num(void)
+{
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			return EXYNOS5420_GPIO_NUM_PARTS;
+		else
+			return EXYNOS5_GPIO_NUM_PARTS;
+	} else if (cpu_is_exynos4()) {
+		if (proid_is_exynos4412())
+			return EXYNOS4X12_GPIO_NUM_PARTS;
+		else
+			return EXYNOS4_GPIO_NUM_PARTS;
+	}
+
+	return 0;
+}
+
+/*
+ * This structure helps mapping symbolic GPIO names into indices from
+ * exynos5_gpio_pin/exynos5420_gpio_pin enums.
+ *
+ * By convention, symbolic GPIO name is defined as follows:
+ *
+ * g[p]<bank><set><bit>, where
+ *   p is optional
+ *   <bank> - a single character bank name, as defined by the SOC
+ *   <set> - a single digit set number
+ *   <bit> - bit number within the set (in 0..7 range).
+ *
+ * <set><bit> essentially form an octal number of the GPIO pin within the bank
+ * space. On the 5420 architecture some banks' sets do not start not from zero
+ * ('d' starts from 1 and 'j' starts from 4). To compensate for that and
+ * maintain flat number space withoout holes, those banks use offsets to be
+ * deducted from the pin number.
+ */
+struct gpio_name_num_table {
+	char bank;		/* bank name symbol */
+	unsigned int bank_size;		/* total number of pins in the bank */
+	char bank_offset;	/* offset of the first bank's pin */
+	unsigned int base;	/* index of the first bank's pin in the enum */
+};
+
+#define GPIO_ENTRY(name, base, top, offset) { name, top - base, offset, base }
+static const struct gpio_name_num_table exynos4_gpio_table[] = {
+	GPIO_ENTRY('a', EXYNOS4_GPIO_A00, EXYNOS4_GPIO_B0, 0),
+	GPIO_ENTRY('b', EXYNOS4_GPIO_B0, EXYNOS4_GPIO_C00, 0),
+	GPIO_ENTRY('c', EXYNOS4_GPIO_C00, EXYNOS4_GPIO_D00, 0),
+	GPIO_ENTRY('d', EXYNOS4_GPIO_D00, EXYNOS4_GPIO_E00, 0),
+	GPIO_ENTRY('e', EXYNOS4_GPIO_E00, EXYNOS4_GPIO_F00, 0),
+	GPIO_ENTRY('f', EXYNOS4_GPIO_F00, EXYNOS4_GPIO_J00, 0),
+	GPIO_ENTRY('j', EXYNOS4_GPIO_J00, EXYNOS4_GPIO_K00, 0),
+	GPIO_ENTRY('k', EXYNOS4_GPIO_K00, EXYNOS4_GPIO_L00, 0),
+	GPIO_ENTRY('l', EXYNOS4_GPIO_L00, EXYNOS4_GPIO_Y00, 0),
+	GPIO_ENTRY('y', EXYNOS4_GPIO_Y00, EXYNOS4_GPIO_X00, 0),
+	GPIO_ENTRY('x', EXYNOS4_GPIO_X00, EXYNOS4_GPIO_Z0, 0),
+	GPIO_ENTRY('z', EXYNOS4_GPIO_Z0, EXYNOS4_GPIO_MAX_PORT, 0),
+	{ 0 }
+};
+
+static const struct gpio_name_num_table exynos4x12_gpio_table[] = {
+	GPIO_ENTRY('a', EXYNOS4X12_GPIO_A00, EXYNOS4X12_GPIO_B0, 0),
+	GPIO_ENTRY('b', EXYNOS4X12_GPIO_B0, EXYNOS4X12_GPIO_C00, 0),
+	GPIO_ENTRY('c', EXYNOS4X12_GPIO_C00, EXYNOS4X12_GPIO_D00, 0),
+	GPIO_ENTRY('d', EXYNOS4X12_GPIO_D00, EXYNOS4X12_GPIO_F00, 0),
+	GPIO_ENTRY('f', EXYNOS4X12_GPIO_F00, EXYNOS4X12_GPIO_J00, 0),
+	GPIO_ENTRY('j', EXYNOS4X12_GPIO_J00, EXYNOS4X12_GPIO_K00, 0),
+	GPIO_ENTRY('k', EXYNOS4X12_GPIO_K00, EXYNOS4X12_GPIO_L00, 0),
+	GPIO_ENTRY('l', EXYNOS4X12_GPIO_L00, EXYNOS4X12_GPIO_Y00, 0),
+	GPIO_ENTRY('y', EXYNOS4X12_GPIO_Y00, EXYNOS4X12_GPIO_M00, 0),
+	GPIO_ENTRY('m', EXYNOS4X12_GPIO_M00, EXYNOS4X12_GPIO_X00, 0),
+	GPIO_ENTRY('x', EXYNOS4X12_GPIO_X00, EXYNOS4X12_GPIO_Z0, 0),
+	GPIO_ENTRY('z', EXYNOS4X12_GPIO_Z0, EXYNOS4X12_GPIO_V00, 0),
+	GPIO_ENTRY('v', EXYNOS4X12_GPIO_V00, EXYNOS4X12_GPIO_MAX_PORT, 0),
+	{ 0 }
+};
+
+static const struct gpio_name_num_table exynos5_gpio_table[] = {
+	GPIO_ENTRY('a', EXYNOS5_GPIO_A00, EXYNOS5_GPIO_B00, 0),
+	GPIO_ENTRY('b', EXYNOS5_GPIO_B00, EXYNOS5_GPIO_C00, 0),
+	GPIO_ENTRY('c', EXYNOS5_GPIO_C00, EXYNOS5_GPIO_D00, 0),
+	GPIO_ENTRY('d', EXYNOS5_GPIO_D00, EXYNOS5_GPIO_Y00, 0),
+	GPIO_ENTRY('y', EXYNOS5_GPIO_Y00, EXYNOS5_GPIO_C40, 0),
+	GPIO_ENTRY('x', EXYNOS5_GPIO_X00, EXYNOS5_GPIO_E00, 0),
+	GPIO_ENTRY('e', EXYNOS5_GPIO_E00, EXYNOS5_GPIO_F00, 0),
+	GPIO_ENTRY('f', EXYNOS5_GPIO_F00, EXYNOS5_GPIO_G00, 0),
+	GPIO_ENTRY('g', EXYNOS5_GPIO_G00, EXYNOS5_GPIO_H00, 0),
+	GPIO_ENTRY('h', EXYNOS5_GPIO_H00, EXYNOS5_GPIO_V00, 0),
+	GPIO_ENTRY('v', EXYNOS5_GPIO_V00, EXYNOS5_GPIO_Z0, 0),
+	GPIO_ENTRY('z', EXYNOS5_GPIO_Z0, EXYNOS5_GPIO_MAX_PORT, 0),
+	{ 0 }
+};
+
+static const struct gpio_name_num_table exynos5420_gpio_table[] = {
+	GPIO_ENTRY('a', EXYNOS5420_GPIO_A00, EXYNOS5420_GPIO_B00, 0),
+	GPIO_ENTRY('b', EXYNOS5420_GPIO_B00, EXYNOS5420_GPIO_H00, 0),
+	GPIO_ENTRY('h', EXYNOS5420_GPIO_H00, EXYNOS5420_GPIO_Y70, 0),
+	GPIO_ENTRY('x', EXYNOS5420_GPIO_X00, EXYNOS5420_GPIO_C00, 0),
+	GPIO_ENTRY('c', EXYNOS5420_GPIO_C00, EXYNOS5420_GPIO_D10, 0),
+	GPIO_ENTRY('d', EXYNOS5420_GPIO_D10, EXYNOS5420_GPIO_Y00, 010),
+	GPIO_ENTRY('y', EXYNOS5420_GPIO_Y00, EXYNOS5420_GPIO_E00, 0),
+	GPIO_ENTRY('e', EXYNOS5420_GPIO_E00, EXYNOS5420_GPIO_F00, 0),
+	GPIO_ENTRY('f', EXYNOS5420_GPIO_F00, EXYNOS5420_GPIO_G00, 0),
+	GPIO_ENTRY('g', EXYNOS5420_GPIO_G00, EXYNOS5420_GPIO_J40, 0),
+	GPIO_ENTRY('j', EXYNOS5420_GPIO_J40, EXYNOS5420_GPIO_Z0, 040),
+	GPIO_ENTRY('z', EXYNOS5420_GPIO_Z0, EXYNOS5420_GPIO_MAX_PORT, 0),
+	{ 0 }
+};
+
+void gpio_cfg_pin(int gpio, int cfg);
+void gpio_set_pull(int gpio, int mode);
+void gpio_set_drv(int gpio, int mode);
+void gpio_set_rate(int gpio, int mode);
+int s5p_gpio_get_pin(unsigned gpio);
+#endif
+
+/* Pin configurations */
+#define S5P_GPIO_INPUT	0x0
+#define S5P_GPIO_OUTPUT	0x1
+#define S5P_GPIO_IRQ	0xf
+#define S5P_GPIO_FUNC(x)	(x)
+
+/* Pull mode */
+#define S5P_GPIO_PULL_NONE	0x0
+#define S5P_GPIO_PULL_DOWN	0x1
+#define S5P_GPIO_PULL_UP	0x3
+
+/* Drive Strength level */
+#define S5P_GPIO_DRV_1X	0x0
+#define S5P_GPIO_DRV_3X	0x1
+#define S5P_GPIO_DRV_2X	0x2
+#define S5P_GPIO_DRV_4X	0x3
+#define S5P_GPIO_DRV_FAST	0x0
+#define S5P_GPIO_DRV_SLOW	0x1
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/i2s-regs.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/i2s-regs.h
new file mode 100644
index 000000000..f67e7eb15
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/i2s-regs.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ */
+
+#ifndef __I2S_REGS_H__
+#define __I2S_REGS_H__
+
+#define CON_RESET		(1 << 31)
+#define CON_TXFIFO_FULL		(1 << 8)
+#define CON_TXCH_PAUSE		(1 << 4)
+#define CON_ACTIVE		(1 << 0)
+
+#define MOD_OP_CLK		(3 << 30)
+#define MOD_BLCP_SHIFT		24
+#define MOD_BLCP_16BIT		(0 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_8BIT		(1 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_24BIT		(2 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_MASK		(3 << MOD_BLCP_SHIFT)
+
+#define MOD_BLC_16BIT		(0 << 13)
+#define MOD_BLC_8BIT		(1 << 13)
+#define MOD_BLC_24BIT		(2 << 13)
+#define MOD_BLC_MASK		(3 << 13)
+
+#define MOD_SLAVE		(1 << 11)
+#define MOD_RCLKSRC		(0 << 10)
+#define MOD_MASK		(3 << 8)
+#define MOD_LR_LLOW		(0 << 7)
+#define MOD_LR_RLOW		(1 << 7)
+#define MOD_SDF_IIS		(0 << 5)
+#define MOD_SDF_MSB		(1 << 5)
+#define MOD_SDF_LSB		(2 << 5)
+#define MOD_SDF_MASK		(3 << 5)
+#define MOD_RCLK_256FS		(0 << 3)
+#define MOD_RCLK_512FS		(1 << 3)
+#define MOD_RCLK_384FS		(2 << 3)
+#define MOD_RCLK_768FS		(3 << 3)
+#define MOD_RCLK_MASK		(3 << 3)
+#define MOD_BCLK_32FS		(0 << 1)
+#define MOD_BCLK_48FS		(1 << 1)
+#define MOD_BCLK_16FS		(2 << 1)
+#define MOD_BCLK_24FS		(3 << 1)
+#define MOD_BCLK_MASK		(3 << 1)
+
+#define MOD_CDCLKCON		(1 << 12)
+
+#define FIC_TXFLUSH		(1 << 15)
+#define FIC_RXFLUSH		(1 << 7)
+
+#define PSREN			(1 << 15)
+#define PSVAL			(3 << 8)
+
+#endif /* __I2S_REGS_H__ */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/mipi_dsim.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/mipi_dsim.h
new file mode 100644
index 000000000..20e6ce7f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/mipi_dsim.h
@@ -0,0 +1,379 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#ifndef _DSIM_H
+#define _DSIM_H
+
+#include <linux/list.h>
+#include <linux/fb.h>
+#include <lcd.h>
+
+#define PANEL_NAME_SIZE		(32)
+
+enum mipi_dsim_interface_type {
+	DSIM_COMMAND,
+	DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+	DSIM_VIRTUAL_CH_0,
+	DSIM_VIRTUAL_CH_1,
+	DSIM_VIRTUAL_CH_2,
+	DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+	DSIM_NON_BURST_SYNC_EVENT,
+	DSIM_BURST_SYNC_EVENT,
+	DSIM_NON_BURST_SYNC_PULSE,
+	DSIM_BURST,
+	DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+	DSIM_DATA_LANE_1,
+	DSIM_DATA_LANE_2,
+	DSIM_DATA_LANE_3,
+	DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+	DSIM_PLL_OUT_DIV8,
+	DSIM_EXT_CLK_DIV8,
+	DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+	DSIM_CMD_3BPP,
+	DSIM_CMD_8BPP,
+	DSIM_CMD_12BPP,
+	DSIM_CMD_16BPP,
+	DSIM_VID_16BPP_565,
+	DSIM_VID_18BPP_666PACKED,
+	DSIM_18BPP_666LOOSELYPACKED,
+	DSIM_24BPP_888
+};
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum {
+	MIPI_DSI_V_SYNC_START				= 0x01,
+	MIPI_DSI_V_SYNC_END				= 0x11,
+	MIPI_DSI_H_SYNC_START				= 0x21,
+	MIPI_DSI_H_SYNC_END				= 0x31,
+
+	MIPI_DSI_COLOR_MODE_OFF				= 0x02,
+	MIPI_DSI_COLOR_MODE_ON				= 0x12,
+	MIPI_DSI_SHUTDOWN_PERIPHERAL			= 0x22,
+	MIPI_DSI_TURN_ON_PERIPHERAL			= 0x32,
+
+	MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM		= 0x03,
+	MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM		= 0x13,
+	MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM		= 0x23,
+
+	MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM		= 0x04,
+	MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM		= 0x14,
+	MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM		= 0x24,
+
+	MIPI_DSI_DCS_SHORT_WRITE			= 0x05,
+	MIPI_DSI_DCS_SHORT_WRITE_PARAM			= 0x15,
+
+	MIPI_DSI_DCS_READ				= 0x06,
+
+	MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE		= 0x37,
+
+	MIPI_DSI_END_OF_TRANSMISSION			= 0x08,
+
+	MIPI_DSI_NULL_PACKET				= 0x09,
+	MIPI_DSI_BLANKING_PACKET			= 0x19,
+	MIPI_DSI_GENERIC_LONG_WRITE			= 0x29,
+	MIPI_DSI_DCS_LONG_WRITE				= 0x39,
+
+	MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20	= 0x0c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24		= 0x1c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16		= 0x2c,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_30			= 0x0d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_36			= 0x1d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12		= 0x3d,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_16			= 0x0e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_18			= 0x1e,
+	MIPI_DSI_PIXEL_STREAM_3BYTE_18			= 0x2e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_24			= 0x3e,
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ *	in Video mode, the vertical line transition uses line counter
+ *	configured by VSA, VBP, and Vertical resolution.
+ *	If this bit is set to '1', the line counter does not use VSA and VBP
+ *	registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ *	In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ *	start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ *	this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ *	(in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ *	if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ *	if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ *	if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ *	sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ *	in Non-burst mode, RGB data area is filled with RGB data and NULL
+ *	packets, according to input bandwidth of RGB interface.
+ *	In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ *	DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ *	clock(System clock cycle base)
+ *	if the timer value goes to 0x00000000, the clock stable bit of status
+ *	and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ *	prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ *	read packet(or write "set_tear_on" command) and BTA request.
+ *	after transmitting read packet or write "set_tear_on" command,
+ *	BTA requests to D-PHY automatically. this counter value specifies
+ *	the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ *	this register specifies time out from BTA request to change
+ *	the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ *	this register specifies time out on how long RxValid deasserts,
+ *	after RxLpdt asserts with respect to Tx escape clock.
+ *	- RxValid specifies Rx data valid indicator.
+ *	- RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ *	- RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+	unsigned char			auto_flush;
+	unsigned char			eot_disable;
+
+	unsigned char			auto_vertical_cnt;
+	unsigned char			hse;
+	unsigned char			hfp;
+	unsigned char			hbp;
+	unsigned char			hsa;
+
+	enum mipi_dsim_interface_type	e_interface;
+	enum mipi_dsim_virtual_ch_no	e_virtual_ch;
+	enum mipi_dsim_pixel_format	e_pixel_format;
+	enum mipi_dsim_burst_mode_type	e_burst_mode;
+	enum mipi_dsim_no_of_data_lane	e_no_data_lane;
+	enum mipi_dsim_byte_clk_src	e_byte_clk;
+
+	/*
+	 * ===========================================
+	 * |    P    |    M    |    S    |    MHz    |
+	 * -------------------------------------------
+	 * |    3    |   100   |    3    |    100    |
+	 * |    3    |   100   |    2    |    200    |
+	 * |    3    |    63   |    1    |    252    |
+	 * |    4    |   100   |    1    |    300    |
+	 * |    4    |   110   |    1    |    330    |
+	 * |   12    |   350   |    1    |    350    |
+	 * |    3    |   100   |    1    |    400    |
+	 * |    4    |   150   |    1    |    450    |
+	 * |    6    |   118   |    1    |    472    |
+	 * |	3    |   120   |    1    |    480    |
+	 * |   12    |   250   |    0    |    500    |
+	 * |    4    |   100   |    0    |    600    |
+	 * |    3    |    81   |    0    |    648    |
+	 * |    3    |    88   |    0    |    704    |
+	 * |    3    |    90   |    0    |    720    |
+	 * |    3    |   100   |    0    |    800    |
+	 * |   12    |   425   |    0    |    850    |
+	 * |    4    |   150   |    0    |    900    |
+	 * |   12    |   475   |    0    |    950    |
+	 * |    6    |   250   |    0    |   1000    |
+	 * -------------------------------------------
+	 */
+
+	/*
+	 * pms could be calculated as the following.
+	 * M * 24 / P * 2 ^ S = MHz
+	 */
+	unsigned char			p;
+	unsigned short			m;
+	unsigned char			s;
+
+	unsigned int			pll_stable_time;
+	unsigned long			esc_clk;
+
+	unsigned short			stop_holding_cnt;
+	unsigned char			bta_timeout;
+	unsigned short			rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dsim_config: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ *	(it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ *	(it would be registered by mipi-dsi driver.)
+ * @state: specifies status of MIPI-DSI controller.
+ *	the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ *	this variable would be set by driver according to e_no_data_lane
+ *	automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ */
+struct mipi_dsim_device {
+	struct mipi_dsim_config		*dsim_config;
+	struct mipi_dsim_master_ops	*master_ops;
+	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
+	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
+
+	unsigned int			state;
+	unsigned int			data_lane;
+	enum mipi_dsim_byte_clk_src	e_clk_src;
+
+	struct exynos_platform_mipi_dsim	*pd;
+};
+
+/*
+ * struct exynos_platform_mipi_dsim - interface to platform data
+ *	for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ *	lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ *	this structure specifies width, height, timing and polarity and so on.
+ * @lcd_power: callback pointer for enabling or disabling lcd power.
+ * @mipi_power: callback pointer for enabling or disabling mipi power.
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct exynos_platform_mipi_dsim {
+	char				lcd_panel_name[PANEL_NAME_SIZE];
+
+	struct mipi_dsim_config		*dsim_config;
+	void				*lcd_panel_info;
+
+	int (*lcd_power)(void);
+	int (*mipi_power)(void);
+	void (*phy_enable)(unsigned int dev_index, unsigned int enable);
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ *	transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ *	- this one would be used only in case of CPU mode.
+ */
+struct mipi_dsim_master_ops {
+	int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		const unsigned char *data0, unsigned int data1);
+	int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		unsigned int data0, unsigned int data1);
+	int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+	int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+	int (*get_fb_frame_done)(void);
+	void (*trigger)(struct fb_info *info);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ *	alias for that name.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ *	and this bus id should be same as id of mipi_dsim_device.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+	char			*name;
+	int			id;
+	int			bus_id;
+	int			reverse_panel;
+
+	struct mipi_dsim_device *master;
+	struct exynos_platform_mipi_dsim *platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ *	alias for that name.
+ * @id: id of driver to be registered.
+ *	this id would be used for finding device object registered.
+ * @mipi_panel_init: callback pointer for initializing lcd panel based on mipi
+ *	dsi interface.
+ * @mipi_display_on: callback pointer for lcd panel display on.
+ */
+struct mipi_dsim_lcd_driver {
+	char			*name;
+	int			id;
+
+	int	(*mipi_panel_init)(struct mipi_dsim_device *dsim_dev);
+	void	(*mipi_display_on)(struct mipi_dsim_device *dsim_dev);
+};
+
+#ifdef CONFIG_EXYNOS_MIPI_DSIM
+int exynos_mipi_dsi_init(struct exynos_platform_mipi_dsim *dsim_pd);
+#else
+static inline int exynos_mipi_dsi_init(
+			struct exynos_platform_mipi_dsim *dsim_pd)
+{
+	return 0;
+}
+#endif
+
+/*
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+						*lcd_drv);
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+						*lcd_dev);
+
+void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd);
+struct vidinfo;
+void exynos_init_dsim_platform_data(struct vidinfo *vid);
+
+/* panel driver init based on mipi dsi interface */
+void s6e8ax0_init(void);
+
+extern int mipi_power(void);
+#endif /* _DSIM_H */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/mmc.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/mmc.h
new file mode 100644
index 000000000..eece44ea1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/mmc.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_MMC_H_
+#define __ASM_ARCH_MMC_H_
+
+#define S5P_MMC_DEV_OFFSET	0x10000
+
+#define SDHCI_CONTROL2		0x80
+#define SDHCI_CONTROL3		0x84
+#define SDHCI_CONTROL4		0x8C
+
+#define SDHCI_CTRL2_ENSTAASYNCCLR	(1 << 31)
+#define SDHCI_CTRL2_ENCMDCNFMSK		(1 << 30)
+#define SDHCI_CTRL2_CDINVRXD3		(1 << 29)
+#define SDHCI_CTRL2_SLCARDOUT		(1 << 28)
+
+#define SDHCI_CTRL2_FLTCLKSEL_MASK	(0xf << 24)
+#define SDHCI_CTRL2_FLTCLKSEL_SHIFT	(24)
+#define SDHCI_CTRL2_FLTCLKSEL(_x)	((_x) << 24)
+
+#define SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
+#define SDHCI_CTRL2_LVLDAT_SHIFT	(16)
+#define SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
+
+#define SDHCI_CTRL2_ENFBCLKTX		(1 << 15)
+#define SDHCI_CTRL2_ENFBCLKRX		(1 << 14)
+#define SDHCI_CTRL2_SDCDSEL		(1 << 13)
+#define SDHCI_CTRL2_SDSIGPC		(1 << 12)
+#define SDHCI_CTRL2_ENBUSYCHKTXSTART	(1 << 11)
+
+#define SDHCI_CTRL2_DFCNT_MASK(_x)	((_x) << 9)
+#define SDHCI_CTRL2_DFCNT_SHIFT		(9)
+
+#define SDHCI_CTRL2_ENCLKOUTHOLD	(1 << 8)
+#define SDHCI_CTRL2_RWAITMODE		(1 << 7)
+#define SDHCI_CTRL2_DISBUFRD		(1 << 6)
+#define SDHCI_CTRL2_SELBASECLK_MASK(_x)	((_x) << 4)
+#define SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
+#define SDHCI_CTRL2_PWRSYNC		(1 << 3)
+#define SDHCI_CTRL2_ENCLKOUTMSKCON	(1 << 1)
+#define SDHCI_CTRL2_HWINITFIN		(1 << 0)
+
+#define SDHCI_CTRL3_FCSEL3		(1 << 31)
+#define SDHCI_CTRL3_FCSEL2		(1 << 23)
+#define SDHCI_CTRL3_FCSEL1		(1 << 15)
+#define SDHCI_CTRL3_FCSEL0		(1 << 7)
+
+#define SDHCI_CTRL4_DRIVE_MASK(_x)	((_x) << 16)
+#define SDHCI_CTRL4_DRIVE_SHIFT		(16)
+
+#define SDHCI_MAX_HOSTS 4
+
+int s5p_sdhci_init(u32 regbase, int index, int bus_width);
+
+static inline int s5p_mmc_init(int index, int bus_width)
+{
+	unsigned int base = samsung_get_base_mmc() +
+				(S5P_MMC_DEV_OFFSET * index);
+
+	return s5p_sdhci_init(base, index, bus_width);
+}
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/periph.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/periph.h
new file mode 100644
index 000000000..f262339f6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/periph.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+	PERIPH_ID_UART0 = 51,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+	PERIPH_ID_UART3,
+	PERIPH_ID_I2C0 = 56,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_I2C4,
+	PERIPH_ID_I2C5,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_I2C7,
+	PERIPH_ID_SPI0 = 68,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SPI2,
+	PERIPH_ID_SDMMC0 = 75,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_I2C8 = 87,
+	PERIPH_ID_I2C9,
+	PERIPH_ID_I2S0 = 98,
+	PERIPH_ID_I2S1 = 99,
+
+	/* Since following peripherals do
+	 * not have shared peripheral interrupts (SPIs)
+	 * they are numbered arbitiraly after the maximum
+	 * SPIs Exynos has (128)
+	 */
+	PERIPH_ID_SROMC = 128,
+	PERIPH_ID_SPI3,
+	PERIPH_ID_SPI4,
+	PERIPH_ID_SDMMC4,
+	PERIPH_ID_PWM0,
+	PERIPH_ID_PWM1,
+	PERIPH_ID_PWM2,
+	PERIPH_ID_PWM3,
+	PERIPH_ID_PWM4,
+	PERIPH_ID_DPHPD,
+	PERIPH_ID_I2C10 = 203,
+
+	PERIPH_ID_NONE = -1,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/pinmux.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/pinmux.h
new file mode 100644
index 000000000..bd1ad5f1a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/pinmux.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Abhilash Kesavan <a.kesavan@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_PINMUX_H
+#define __ASM_ARM_ARCH_PINMUX_H
+
+#include "periph.h"
+
+/*
+ * Flags for setting specific configarations of peripherals.
+ * List will grow with support for more devices getting added.
+ */
+enum {
+	PINMUX_FLAG_NONE	= 0x00000000,
+
+	/* Flags for eMMC */
+	PINMUX_FLAG_8BIT_MODE	= 1 << 0,       /* SDMMC 8-bit mode */
+
+	/* Flags for SROM controller */
+	PINMUX_FLAG_BANK	= 3 << 0,       /* bank number (0-3) */
+	PINMUX_FLAG_16BIT	= 1 << 2,       /* 16-bit width */
+
+	/* Flags for I2C */
+	PINMUX_FLAG_HS_MODE	= 1 << 1,       /* I2C High Speed Mode */
+};
+
+/**
+ * Configures the pinmux for a particular peripheral.
+ *
+ * Each gpio can be configured in many different ways (4 bits on exynos)
+ * such as "input", "output", "special function", "external interrupt"
+ * etc. This function will configure the peripheral pinmux along with
+ * pull-up/down and drive strength.
+ *
+ * @param peripheral	peripheral to be configured
+ * @param flags		configure flags
+ * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
+ */
+int exynos_pinmux_config(int peripheral, int flags);
+
+/**
+ * Decode the peripheral id using the interrpt numbers.
+ *
+ * @param blob  Device tree blob
+ * @param node  FDT I2C node to find
+ * @return peripheral id if ok, PERIPH_ID_NONE on error
+ */
+int pinmux_decode_periph_id(const void *blob, int node);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/power.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/power.h
new file mode 100644
index 000000000..a3d8974dc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/power.h
@@ -0,0 +1,1757 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_POWER_H_
+#define __ASM_ARM_ARCH_POWER_H_
+
+#ifndef __ASSEMBLY__
+struct exynos4_power {
+	unsigned int	om_stat;
+	unsigned char	res1[0x8];
+	unsigned int	rtc_clko_sel;
+	unsigned int	gnss_rtc_out_ctrl;
+	unsigned char	res2[0x1ec];
+	unsigned int	system_power_down_ctrl;
+	unsigned int	res3;
+	unsigned int	system_power_down_option;
+	unsigned char	res4[0x1f4];
+	unsigned int	swreset;
+	unsigned int	rst_stat;
+	unsigned char	res5[0x1f8];
+	unsigned int	wakeup_stat;
+	unsigned int	eint_wakeup_mask;
+	unsigned int	wakeup_mask;
+	unsigned char	res6[0xf4];
+	unsigned int	hdmi_phy_control;
+	unsigned int	usbdevice_phy_control;
+	unsigned int	usbhost_phy_control;
+	unsigned int	dac_phy_control;
+	unsigned int	mipi_phy0_control;
+	unsigned int	mipi_phy1_control;
+	unsigned int	adc_phy_control;
+	unsigned int	pcie_phy_control;
+	unsigned int	sata_phy_control;
+	unsigned char	res7[0xdc];
+	unsigned int	inform0;
+	unsigned int	inform1;
+	unsigned int	inform2;
+	unsigned int	inform3;
+	unsigned int	inform4;
+	unsigned int	inform5;
+	unsigned int	inform6;
+	unsigned int	inform7;
+	unsigned char	res8[0x1e0];
+	unsigned int	pmu_debug;
+	unsigned char	res9[0x5fc];
+	unsigned int	arm_core0_sys_pwr_reg;
+	unsigned char	res10[0xc];
+	unsigned int	arm_core1_sys_pwr_reg;
+	unsigned char	res11[0x6c];
+	unsigned int	arm_common_sys_pwr_reg;
+	unsigned char	res12[0x3c];
+	unsigned int	arm_cpu_l2_0_sys_pwr_reg;
+	unsigned int	arm_cpu_l2_1_sys_pwr_reg;
+	unsigned char	res13[0x38];
+	unsigned int	cmu_aclkstop_sys_pwr_reg;
+	unsigned int	cmu_sclkstop_sys_pwr_reg;
+	unsigned char	res14[0x4];
+	unsigned int	cmu_reset_sys_pwr_reg;
+	unsigned char	res15[0x10];
+	unsigned int	apll_sysclk_sys_pwr_reg;
+	unsigned int	mpll_sysclk_sys_pwr_reg;
+	unsigned int	vpll_sysclk_sys_pwr_reg;
+	unsigned int	epll_sysclk_sys_pwr_reg;
+	unsigned char	res16[0x8];
+	unsigned int	cmu_clkstop_gps_alive_sys_pwr_reg;
+	unsigned int	cmu_reset_gps_alive_sys_pwr_reg;
+	unsigned int	cmu_clkstop_cam_sys_pwr_reg;
+	unsigned int	cmu_clkstop_tv_sys_pwr_reg;
+	unsigned int	cmu_clkstop_mfc_sys_pwr_reg;
+	unsigned int	cmu_clkstop_g3d_sys_pwr_reg;
+	unsigned int	cmu_clkstop_lcd0_sys_pwr_reg;
+	unsigned int	cmu_clkstop_lcd1_sys_pwr_reg;
+	unsigned int	cmu_clkstop_maudio_sys_pwr_reg;
+	unsigned int	cmu_clkstop_gps_sys_pwr_reg;
+	unsigned int	cmu_reset_cam_sys_pwr_reg;
+	unsigned int	cmu_reset_tv_sys_pwr_reg;
+	unsigned int	cmu_reset_mfc_sys_pwr_reg;
+	unsigned int	cmu_reset_g3d_sys_pwr_reg;
+	unsigned int	cmu_reset_lcd0_sys_pwr_reg;
+	unsigned int	cmu_reset_lcd1_sys_pwr_reg;
+	unsigned int	cmu_reset_maudio_sys_pwr_reg;
+	unsigned int	cmu_reset_gps_sys_pwr_reg;
+	unsigned int	top_bus_sys_pwr_reg;
+	unsigned int	top_retention_sys_pwr_reg;
+	unsigned int	top_pwr_sys_pwr_reg;
+	unsigned char	res17[0x1c];
+	unsigned int	logic_reset_sys_pwr_reg;
+	unsigned char	res18[0x14];
+	unsigned int	onenandxl_mem_sys_pwr_reg;
+	unsigned int	modemif_mem_sys_pwr_reg;
+	unsigned char	res19[0x4];
+	unsigned int	usbdevice_mem_sys_pwr_reg;
+	unsigned int	sdmmc_mem_sys_pwr_reg;
+	unsigned int	cssys_mem_sys_pwr_reg;
+	unsigned int	secss_mem_sys_pwr_reg;
+	unsigned char	res20[0x4];
+	unsigned int	pcie_mem_sys_pwr_reg;
+	unsigned int	sata_mem_sys_pwr_reg;
+	unsigned char	res21[0x18];
+	unsigned int	pad_retention_dram_sys_pwr_reg;
+	unsigned int	pad_retention_maudio_sys_pwr_reg;
+	unsigned char	res22[0x18];
+	unsigned int	pad_retention_gpio_sys_pwr_reg;
+	unsigned int	pad_retention_uart_sys_pwr_reg;
+	unsigned int	pad_retention_mmca_sys_pwr_reg;
+	unsigned int	pad_retention_mmcb_sys_pwr_reg;
+	unsigned int	pad_retention_ebia_sys_pwr_reg;
+	unsigned int	pad_retention_ebib_sys_pwr_reg;
+	unsigned char	res23[0x8];
+	unsigned int	pad_isolation_sys_pwr_reg;
+	unsigned char	res24[0x1c];
+	unsigned int	pad_alv_sel_sys_pwr_reg;
+	unsigned char	res25[0x1c];
+	unsigned int	xusbxti_sys_pwr_reg;
+	unsigned int	xxti_sys_pwr_reg;
+	unsigned char	res26[0x38];
+	unsigned int	ext_regulator_sys_pwr_reg;
+	unsigned char	res27[0x3c];
+	unsigned int	gpio_mode_sys_pwr_reg;
+	unsigned char	res28[0x3c];
+	unsigned int	gpio_mode_maudio_sys_pwr_reg;
+	unsigned char	res29[0x3c];
+	unsigned int	cam_sys_pwr_reg;
+	unsigned int	tv_sys_pwr_reg;
+	unsigned int	mfc_sys_pwr_reg;
+	unsigned int	g3d_sys_pwr_reg;
+	unsigned int	lcd0_sys_pwr_reg;
+	unsigned int	lcd1_sys_pwr_reg;
+	unsigned int	maudio_sys_pwr_reg;
+	unsigned int	gps_sys_pwr_reg;
+	unsigned int	gps_alive_sys_pwr_reg;
+	unsigned char	res30[0xc5c];
+	unsigned int	arm_core0_configuration;
+	unsigned int	arm_core0_status;
+	unsigned int	arm_core0_option;
+	unsigned char	res31[0x74];
+	unsigned int	arm_core1_configuration;
+	unsigned int	arm_core1_status;
+	unsigned int	arm_core1_option;
+	unsigned char	res32[0x37c];
+	unsigned int	arm_common_option;
+	unsigned char	res33[0x1f4];
+	unsigned int	arm_cpu_l2_0_configuration;
+	unsigned int	arm_cpu_l2_0_status;
+	unsigned char	res34[0x18];
+	unsigned int	arm_cpu_l2_1_configuration;
+	unsigned int	arm_cpu_l2_1_status;
+	unsigned char	res35[0xa00];
+	unsigned int	pad_retention_maudio_option;
+	unsigned char	res36[0xdc];
+	unsigned int	pad_retention_gpio_option;
+	unsigned char	res37[0x1c];
+	unsigned int	pad_retention_uart_option;
+	unsigned char	res38[0x1c];
+	unsigned int	pad_retention_mmca_option;
+	unsigned char	res39[0x1c];
+	unsigned int	pad_retention_mmcb_option;
+	unsigned char	res40[0x1c];
+	unsigned int	pad_retention_ebia_option;
+	unsigned char	res41[0x1c];
+	unsigned int	pad_retention_ebib_option;
+	unsigned char	res42[0x160];
+	unsigned int	ps_hold_control;
+	unsigned char	res43[0xf0];
+	unsigned int	xusbxti_configuration;
+	unsigned int	xusbxti_status;
+	unsigned char	res44[0x14];
+	unsigned int	xusbxti_duration;
+	unsigned int	xxti_configuration;
+	unsigned int	xxti_status;
+	unsigned char	res45[0x14];
+	unsigned int	xxti_duration;
+	unsigned char	res46[0x1dc];
+	unsigned int	ext_regulator_duration;
+	unsigned char	res47[0x5e0];
+	unsigned int	cam_configuration;
+	unsigned int	cam_status;
+	unsigned int	cam_option;
+	unsigned char	res48[0x14];
+	unsigned int	tv_configuration;
+	unsigned int	tv_status;
+	unsigned int	tv_option;
+	unsigned char	res49[0x14];
+	unsigned int	mfc_configuration;
+	unsigned int	mfc_status;
+	unsigned int	mfc_option;
+	unsigned char	res50[0x14];
+	unsigned int	g3d_configuration;
+	unsigned int	g3d_status;
+	unsigned int	g3d_option;
+	unsigned char	res51[0x14];
+	unsigned int	lcd0_configuration;
+	unsigned int	lcd0_status;
+	unsigned int	lcd0_option;
+	unsigned char	res52[0x14];
+	unsigned int	lcd1_configuration;
+	unsigned int	lcd1_status;
+	unsigned int	lcd1_option;
+	unsigned char	res53[0x34];
+	unsigned int	gps_configuration;
+	unsigned int	gps_status;
+	unsigned int	gps_option;
+	unsigned char	res54[0x14];
+	unsigned int	gps_alive_configuration;
+	unsigned int	gps_alive_status;
+	unsigned int	gps_alive_option;
+};
+
+struct exynos4412_power {
+	unsigned char	res1[0x0704];
+	unsigned int	usbhost_phy_control;
+	unsigned int	hsic1_phy_control;
+	unsigned int	hsic2_phy_control;
+};
+
+struct exynos5_power {
+	unsigned int	om_stat;
+	unsigned char	res1[0x18];
+	unsigned int	rtc_clko_sel;
+	unsigned int	gnss_rtc_out_ctrl;
+	unsigned char	res2[0x1dc];
+	unsigned int	central_seq_configuration;
+	unsigned int	central_seq_status;
+	unsigned int	central_seq_option;
+	unsigned char	res3[0x14];
+	unsigned int	seq_transition0;
+	unsigned int	seq_transition1;
+	unsigned int	seq_transition2;
+	unsigned int	seq_transition3;
+	unsigned int	seq_transition4;
+	unsigned int	seq_transition5;
+	unsigned int	seq_transition6;
+	unsigned int	seq_transition7;
+	unsigned int	central_seq_dmc_configuration;
+	unsigned int	central_seq_dmc_status;
+	unsigned int	central_seq_dmc_option;
+	unsigned char	res4[0x14];
+	unsigned int	seq_dmc_transition0;
+	unsigned int	seq_dmc_transition1;
+	unsigned int	seq_dmc_transition2;
+	unsigned int	seq_dmc_transition3;
+	unsigned int	seq_dmc_transition4;
+	unsigned int	seq_dmc_transition5;
+	unsigned int	seq_dmc_transition6;
+	unsigned int	seq_dmc_transition7;
+	unsigned char	res5[0x180];
+	unsigned int	swreset;
+	unsigned int	rst_stat;
+	unsigned int	automatic_wdt_reset_disable;
+	unsigned int	mask_wdt_reset_request;
+	unsigned int	mask_wreset_request;
+	unsigned char	res6[0xec];
+	unsigned int	reset_sequencer_configuration;
+	unsigned int	reset_sequencer_status;
+	unsigned int	reset_sequencer_option;
+	unsigned char	res7[0xf4];
+	unsigned int	wakeup_stat;
+	unsigned int	eint_wakeup_mask;
+	unsigned int	wakeup_mask;
+	unsigned int	wakeup_interrupt;
+	unsigned char	res8[0x10];
+	unsigned int	wakeup_stat_dmc;
+	unsigned int	eint_wakeup_mask_dmc;
+	unsigned int	wakeup_mask_dmc;
+	unsigned int	wakeup_interrupt_dmc;
+	unsigned char	res9[0xd0];
+	unsigned int	hdmi_phy_control;
+	unsigned int	usbdrd_phy_control;
+	unsigned int	usbhost_phy_control;
+	unsigned int	efnand_phy_control;
+	unsigned int	mipi_phy0_control;
+	unsigned int	mipi_phy1_control;
+	unsigned int	adc_phy_control;
+	unsigned int	mtcadc_phy_control;
+	unsigned int	dptx_phy_control;
+	unsigned int	sata_phy_control;
+	unsigned char	res10[0xd8];
+	unsigned int	inform0;
+	unsigned int	inform1;
+	unsigned int	inform2;
+	unsigned int	inform3;
+	unsigned int	sysip_dat0;
+	unsigned int	sysip_dat1;
+	unsigned int	sysip_dat2;
+	unsigned int	sysip_dat3;
+	unsigned char	res11[0xe0];
+	unsigned int	pmu_spare0;
+	unsigned int	pmu_spare1;
+	unsigned int	pmu_spare2;
+	unsigned int	pmu_spare3;
+	unsigned char	res12[0x70];
+	unsigned int	irom_data_reg0;
+	unsigned int	irom_data_reg1;
+	unsigned int	irom_data_reg2;
+	unsigned int	irom_data_reg3;
+	unsigned char	res13[0x70];
+	unsigned int	pmu_debug;
+	unsigned char	res14[0x5fc];
+	unsigned int	arm_core0_sys_pwr_reg;
+	unsigned int	dis_irq_arm_core0_local_sys_pwr_reg;
+	unsigned int	dis_irq_arm_core0_central_sys_pwr_reg;
+	unsigned char	res15[0x4];
+	unsigned int	arm_core1_sys_pwr_reg;
+	unsigned int	dis_irq_arm_core1_local_sys_pwr_reg;
+	unsigned int	dis_irq_arm_core1_central_sys_pwr_reg;
+	unsigned char	res16[0x24];
+	unsigned int	fsys_arm_sys_pwr_reg;
+	unsigned int	dis_irq_fsys_arm_local_sys_pwr_reg;
+	unsigned int	dis_irq_fsys_arm_central_sys_pwr_reg;
+	unsigned char	res17[0x4];
+	unsigned int	isp_arm_sys_pwr_reg;
+	unsigned int	dis_irq_isp_arm_local_sys_pwr_reg;
+	unsigned int	dis_irq_isp_arm_central_sys_pwr_reg;
+	unsigned char	res18[0x24];
+	unsigned int	arm_common_sys_pwr_reg;
+	unsigned char	res19[0x3c];
+	unsigned int	arm_l2_sys_pwr_reg;
+	unsigned char	res20[0x3c];
+	unsigned int	cmu_aclkstop_sys_pwr_reg;
+	unsigned int	cmu_sclkstop_sys_pwr_reg;
+	unsigned char	res21[0x4];
+	unsigned int	cmu_reset_sys_pwr_reg;
+	unsigned char	res22[0x10];
+	unsigned int	cmu_aclkstop_dmc_sys_pwr_reg;
+	unsigned int	cmu_sclkstop_dmc_sys_pwr_reg;
+	unsigned char	res23[0x4];
+	unsigned int	cmu_reset_dmc_sys_pwr_reg;
+	unsigned char	res24[0x8];
+	unsigned int	ddrphy_dlllock_sys_pwr_reg;
+	unsigned char	res25[0x4];
+	unsigned int	apll_sysclk_sys_pwr_reg;
+	unsigned int	mpll_sysclk_sys_pwr_reg;
+	unsigned int	vpll_sysclk_sys_pwr_reg;
+	unsigned int	epll_sysclk_sys_pwr_reg;
+	unsigned int	bpll_sysclk_sys_pwr_reg;
+	unsigned int	cpll_sysclk_sys_pwr_reg;
+	unsigned int	gpll_sysclk_sys_pwr_reg;
+	unsigned char	res26[0x8];
+	unsigned int	mplluser_sysclk_sys_pwr_reg;
+	unsigned char	res27[0x8];
+	unsigned int	bplluser_sysclk_sys_pwr_reg;
+	unsigned char	res28[0xc];
+	unsigned int	top_bus_sys_pwr_reg;
+	unsigned int	top_retention_sys_pwr_reg;
+	unsigned int	top_pwr_sys_pwr_reg;
+	unsigned char	res29[0x4];
+	unsigned int	top_bus_dmc_sys_pwr_reg;
+	unsigned int	top_retention_dmc_sys_pwr_reg;
+	unsigned int	top_pwr_dmc_sys_pwr_reg;
+	unsigned char	res30[0x4];
+	unsigned int	logic_reset_sys_pwr_reg;
+	unsigned int	oscclk_gate_sys_pwr_reg;
+	unsigned char	res31[0x8];
+	unsigned int	logic_reset_dmc_sys_pwr_reg;
+	unsigned int	oscclk_gate_dmc_sys_pwr_reg;
+	unsigned char	res32[0x8];
+	unsigned int	usbotg_mem_sys_pwr_reg;
+	unsigned char	res33[0x4];
+	unsigned int	g2d_mem_sys_pwr_reg;
+	unsigned int	usbdrd_mem_sys_pwr_reg;
+	unsigned int	efnand_mem_sys_pwr_reg;
+	unsigned int	cssys_mem_sys_pwr_reg;
+	unsigned int	secss_mem_sys_pwr_reg;
+	unsigned int	rotator_mem_sys_pwr_reg;
+	unsigned int	intram_mem_sys_pwr_reg;
+	unsigned int	introm_mem_sys_pwr_reg;
+	unsigned int	jpeg_mem_sys_pwr_reg;
+	unsigned int	hsi_mem_sys_pwr_reg;
+	unsigned char	res34[0x4];
+	unsigned int	mcuiop_mem_sys_pwr_reg;
+	unsigned char	res35[0x4];
+	unsigned int	sata_mem_sys_pwr_reg;
+	unsigned int	pad_retention_dram_sys_pwr_reg;
+	unsigned int	pad_retention_mau_sys_pwr_reg;
+	unsigned int	pad_retention_jtag_sys_pwr_reg;
+	unsigned char	res36[0xc];
+	unsigned int	pad_retention_mmc2_sys_pwr_reg;
+	unsigned int	pad_retention_mmc3_sys_pwr_reg;
+	unsigned int	pad_retention_gpio_sys_pwr_reg;
+	unsigned int	pad_retention_uart_sys_pwr_reg;
+	unsigned int	pad_retention_mmc0_sys_pwr_reg;
+	unsigned int	pad_retention_mmc1_sys_pwr_reg;
+	unsigned int	pad_retention_ebia_sys_pwr_reg;
+	unsigned int	pad_retention_ebib_sys_pwr_reg;
+	unsigned int	pad_retention_spi_sys_pwr_reg;
+	unsigned int	pad_retention_gpio_dmc_sys_pwr_reg;
+	unsigned int	pad_isolation_sys_pwr_reg;
+	unsigned char	res37[0xc];
+	unsigned int	pad_isolation_dmc_sys_pwr_reg;
+	unsigned char	res38[0xc];
+	unsigned int	pad_alv_sel_sys_pwr_reg;
+	unsigned char	res39[0x20];
+	unsigned int	xxti_sys_pwr_reg;
+	unsigned char	res40[0x38];
+	unsigned int	ext_regulator_sys_pwr_reg;
+	unsigned char	res41[0x3c];
+	unsigned int	gpio_mode_sys_pwr_reg;
+	unsigned char	res42[0x1c];
+	unsigned int	gpio_mode_dmc_sys_pwr_reg;
+	unsigned char	res43[0x1c];
+	unsigned int	gpio_mode_mau_sys_pwr_reg;
+	unsigned int	top_asb_reset_sys_pwr_reg;
+	unsigned int	top_asb_isolation_sys_pwr_reg;
+	unsigned char	res44[0xb4];
+	unsigned int	gscl_sys_pwr_reg;
+	unsigned int	isp_sys_pwr_reg;
+	unsigned int	mfc_sys_pwr_reg;
+	unsigned int	g3d_sys_pwr_reg;
+	unsigned char	res45[0x4];
+	unsigned int	disp1_sys_pwr_reg;
+	unsigned int	mau_sys_pwr_reg;
+	unsigned char	res46[0x64];
+	unsigned int	cmu_clkstop_gscl_sys_pwr_reg;
+	unsigned int	cmu_clkstop_isp_sys_pwr_reg;
+	unsigned int	cmu_clkstop_mfc_sys_pwr_reg;
+	unsigned int	cmu_clkstop_g3d_sys_pwr_reg;
+	unsigned char	res47[0x4];
+	unsigned int	cmu_clkstop_disp1_sys_pwr_reg;
+	unsigned int	cmu_clkstop_mau_sys_pwr_reg;
+	unsigned char	res48[0x24];
+	unsigned int	cmu_sysclk_gscl_sys_pwr_reg;
+	unsigned int	cmu_sysclk_isp_sys_pwr_reg;
+	unsigned int	cmu_sysclk_mfc_sys_pwr_reg;
+	unsigned int	cmu_sysclk_g3d_sys_pwr_reg;
+	unsigned char	res49[0x4];
+	unsigned int	cmu_sysclk_disp1_sys_pwr_reg;
+	unsigned int	cmu_sysclk_mau_sys_pwr_reg;
+	unsigned char	res50[0xa4];
+	unsigned int	cmu_reset_gscl_sys_pwr_reg;
+	unsigned int	cmu_reset_isp_sys_pwr_reg;
+	unsigned int	cmu_reset_mfc_sys_pwr_reg;
+	unsigned int	cmu_reset_g3d_sys_pwr_reg;
+	unsigned char	res51[0x4];
+	unsigned int	cmu_reset_disp1_sys_pwr_reg;
+	unsigned int	cmu_reset_mau_sys_pwr_reg;
+	unsigned char	res52[0xa64];
+	unsigned int	arm_core0_configuration;
+	unsigned int	arm_core0_status;
+	unsigned int	arm_core0_option;
+	unsigned char	res53[0x14];
+	unsigned int	dis_irq_arm_core0_local_configuration;
+	unsigned int	dis_irq_arm_core0_local_status;
+	unsigned int	dis_irq_arm_core0_local_option;
+	unsigned char	res54[0x14];
+	unsigned int	dis_irq_arm_core0_central_configuration;
+	unsigned int	dis_irq_arm_core0_central_status;
+	unsigned int	dis_irq_arm_core0_central_option;
+	unsigned char	res55[0x34];
+	unsigned int	arm_core1_configuration;
+	unsigned int	arm_core1_status;
+	unsigned int	arm_core1_option;
+	unsigned char	res56[0x14];
+	unsigned int	dis_irq_arm_core1_local_configuration;
+	unsigned int	dis_irq_arm_core1_local_status;
+	unsigned int	dis_irq_arm_core1_local_option;
+	unsigned char	res57[0x14];
+	unsigned int	dis_irq_arm_core1_central_configuration;
+	unsigned int	dis_irq_arm_core1_central_status;
+	unsigned int	dis_irq_arm_core1_central_option;
+	unsigned char	res58[0x134];
+	unsigned int	fsys_arm_configuration;
+	unsigned int	fsys_arm_status;
+	unsigned int	fsys_arm_option;
+	unsigned char	res59[0x14];
+	unsigned int	dis_irq_fsys_arm_local_configuration;
+	unsigned int	dis_irq_fsys_arm_local_status;
+	unsigned int	dis_irq_fsys_arm_local_option;
+	unsigned char	res60[0x14];
+	unsigned int	dis_irq_fsys_arm_central_configuration;
+	unsigned int	dis_irq_fsys_arm_central_status;
+	unsigned int	dis_irq_fsys_arm_central_option;
+	unsigned char	res61[0x34];
+	unsigned int	isp_arm_configuration;
+	unsigned int	isp_arm_status;
+	unsigned int	isp_arm_option;
+	unsigned char	res62[0x14];
+	unsigned int	dis_irq_isp_arm_local_configuration;
+	unsigned int	dis_irq_isp_arm_local_status;
+	unsigned int	dis_irq_isp_arm_local_option;
+	unsigned char	res63[0x14];
+	unsigned int	dis_irq_isp_arm_central_configuration;
+	unsigned int	dis_irq_isp_arm_central_status;
+	unsigned int	dis_irq_isp_arm_central_option;
+	unsigned char	res64[0x134];
+	unsigned int	arm_common_configuration;
+	unsigned int	arm_common_status;
+	unsigned int	arm_common_option;
+	unsigned char	res65[0x1f4];
+	unsigned int	arm_l2_configuration;
+	unsigned int	arm_l2_status;
+	unsigned int	arm_l2_option;
+	unsigned char	res66[0x1f4];
+	unsigned int	cmu_aclkstop_configuration;
+	unsigned int	cmu_aclkstop_status;
+	unsigned int	cmu_aclkstop_option;
+	unsigned char	res67[0x14];
+	unsigned int	cmu_sclkstop_configuration;
+	unsigned int	cmu_sclkstop_status;
+	unsigned int	cmu_sclkstop_option;
+	unsigned char	res68[0x34];
+	unsigned int	cmu_reset_configuration;
+	unsigned int	cmu_reset_status;
+	unsigned int	cmu_reset_option;
+	unsigned char	res69[0x94];
+	unsigned int	cmu_aclkstop_dmc_configuration;
+	unsigned int	cmu_aclkstop_dmc_status;
+	unsigned int	cmu_aclkstop_dmc_option;
+	unsigned char	res70[0x14];
+	unsigned int	cmu_sclkstop_dmc_configuration;
+	unsigned int	cmu_sclkstop_dmc_status;
+	unsigned int	cmu_sclkstop_dmc_option;
+	unsigned char	res71[0x34];
+	unsigned int	cmu_reset_dmc_configuration;
+	unsigned int	cmu_reset_dmc_status;
+	unsigned int	cmu_reset_dmc_option;
+	unsigned char	res72[0x54];
+	unsigned int	ddrphy_dlllock_configuration;
+	unsigned int	ddrphy_dlllock_status;
+	unsigned int	ddrphy_dlllock_option;
+	unsigned char	res73[0x34];
+	unsigned int	apll_sysclk_configuration;
+	unsigned int	apll_sysclk_status;
+	unsigned int	apll_sysclk_option;
+	unsigned char	res74[0x18];
+	unsigned int	mpll_sysclk_status;
+	unsigned int	mpll_sysclk_option;
+	unsigned char	res75[0x14];
+	unsigned int	vpll_sysclk_configuration;
+	unsigned int	vpll_sysclk_status;
+	unsigned int	vpll_sysclk_option;
+	unsigned char	res76[0x14];
+	unsigned int	epll_sysclk_configuration;
+	unsigned int	epll_sysclk_status;
+	unsigned int	epll_sysclk_option;
+	unsigned char	res77[0x14];
+	unsigned int	bpll_sysclk_configuration;
+	unsigned int	bpll_sysclk_status;
+	unsigned int	bpll_sysclk_option;
+	unsigned char	res78[0x14];
+	unsigned int	cpll_sysclk_configuration;
+	unsigned int	cpll_sysclk_status;
+	unsigned int	cpll_sysclk_option;
+	unsigned char	res79[0x14];
+	unsigned int	gpll_sysclk_configuration;
+	unsigned int	gpll_sysclk_status;
+	unsigned int	gpll_sysclk_option;
+	unsigned char	res80[0x54];
+	unsigned int	mplluser_sysclk_configuration;
+	unsigned int	mplluser_sysclk_status;
+	unsigned int	mplluser_sysclk_option;
+	unsigned char	res81[0x54];
+	unsigned int	bplluser_sysclk_configuration;
+	unsigned int	bplluser_sysclk_status;
+	unsigned int	bplluser_sysclk_option;
+	unsigned char	res82[0x74];
+	unsigned int	top_bus_configuration;
+	unsigned int	top_bus_status;
+	unsigned int	top_bus_option;
+	unsigned char	res83[0x14];
+	unsigned int	top_retention_configuration;
+	unsigned int	top_retention_status;
+	unsigned int	top_retention_option;
+	unsigned char	res84[0x14];
+	unsigned int	top_pwr_configuration;
+	unsigned int	top_pwr_status;
+	unsigned int	top_pwr_option;
+	unsigned char	res85[0x34];
+	unsigned int	top_bus_dmc_configuration;
+	unsigned int	top_bus_dmc_status;
+	unsigned int	top_bus_dmc_option;
+	unsigned char	res86[0x14];
+	unsigned int	top_retention_dmc_configuration;
+	unsigned int	top_retention_dmc_status;
+	unsigned int	top_retention_dmc_option;
+	unsigned char	res87[0x14];
+	unsigned int	top_pwr_dmc_configuration;
+	unsigned int	top_pwr_dmc_status;
+	unsigned int	top_pwr_dmc_option;
+	unsigned char	res88[0x34];
+	unsigned int	logic_reset_configuration;
+	unsigned int	logic_reset_status;
+	unsigned int	logic_reset_option;
+	unsigned char	res89[0x14];
+	unsigned int	oscclk_gate_configuration;
+	unsigned int	oscclk_gate_status;
+	unsigned int	oscclk_gate_option;
+	unsigned char	res90[0x54];
+	unsigned int	logic_reset_dmc_configuration;
+	unsigned int	logic_reset_dmc_status;
+	unsigned int	logic_reset_dmc_option;
+	unsigned char	res91[0x14];
+	unsigned int	oscclk_gate_dmc_configuration;
+	unsigned int	oscclk_gate_dmc_status;
+	unsigned int	oscclk_gate_dmc_option;
+	unsigned char	res92[0x54];
+	unsigned int	usbotg_mem_configuration;
+	unsigned int	usbotg_mem_status;
+	unsigned int	usbotg_mem_option;
+	unsigned char	res93[0x34];
+	unsigned int	g2d_mem_configuration;
+	unsigned int	g2d_mem_status;
+	unsigned int	g2d_mem_option;
+	unsigned char	res94[0x14];
+	unsigned int	usbdrd_mem_configuration;
+	unsigned int	usbdrd_mem_status;
+	unsigned int	usbdrd_mem_option;
+	unsigned char	res95[0x14];
+	unsigned int	efnand_mem_configuration;
+	unsigned int	efnand_mem_status;
+	unsigned int	efnand_mem_option;
+	unsigned char	res96[0x14];
+	unsigned int	cssys_mem_configuration;
+	unsigned int	cssys_mem_status;
+	unsigned int	cssys_mem_option;
+	unsigned char	res97[0x14];
+	unsigned int	secss_mem_configuration;
+	unsigned int	secss_mem_status;
+	unsigned int	secss_mem_option;
+	unsigned char	res98[0x14];
+	unsigned int	rotator_mem_configuration;
+	unsigned int	rotator_mem_status;
+	unsigned int	rotator_mem_option;
+	unsigned char	res99[0x14];
+	unsigned int	intram_mem_configuration;
+	unsigned int	intram_mem_status;
+	unsigned int	intram_mem_option;
+	unsigned char	res100[0x14];
+	unsigned int	introm_mem_configuration;
+	unsigned int	introm_mem_status;
+	unsigned int	introm_mem_option;
+	unsigned char	res101[0x14];
+	unsigned int	jpeg_mem_configuration;
+	unsigned int	jpeg_mem_status;
+	unsigned int	jpeg_mem_option;
+	unsigned char	res102[0x14];
+	unsigned int	hsi_mem_configuration;
+	unsigned int	hsi_mem_status;
+	unsigned int	hsi_mem_option;
+	unsigned char	res103[0x34];
+	unsigned int	mcuiop_mem_configuration;
+	unsigned int	mcuiop_mem_status;
+	unsigned int	mcuiop_mem_option;
+	unsigned char	res104[0x14];
+	unsigned int	sata_mem_configuration;
+	unsigned int	sata_mem_status;
+	unsigned int	sata_mem_option;
+	unsigned char	res105[0x34];
+	unsigned int	pad_retention_dram_configuration;
+	unsigned int	pad_retention_dram_status;
+	unsigned int	pad_retention_dram_option;
+	unsigned char	res106[0x14];
+	unsigned int	pad_retention_mau_configuration;
+	unsigned int	pad_retention_mau_status;
+	unsigned int	pad_retention_mau_option;
+	unsigned char	res107[0x14];
+	unsigned int	pad_retention_jtag_configuration;
+	unsigned int	pad_retention_jtag_status;
+	unsigned int	pad_retention_jtag_option;
+	unsigned char	res108[0x74];
+	unsigned int	pad_retention_mmc2_configuration;
+	unsigned int	pad_retention_mmc2_status;
+	unsigned int	pad_retention_mmc2_option;
+	unsigned char	res109[0x14];
+	unsigned int	pad_retention_mmc3_configuration;
+	unsigned int	pad_retention_mmc3_status;
+	unsigned int	pad_retention_mmc3_option;
+	unsigned char	res110[0x14];
+	unsigned int	pad_retention_gpio_configuration;
+	unsigned int	pad_retention_gpio_status;
+	unsigned int	pad_retention_gpio_option;
+	unsigned char	res111[0x14];
+	unsigned int	pad_retention_uart_configuration;
+	unsigned int	pad_retention_uart_status;
+	unsigned int	pad_retention_uart_option;
+	unsigned char	res112[0x14];
+	unsigned int	pad_retention_mmc0_configuration;
+	unsigned int	pad_retention_mmc0_status;
+	unsigned int	pad_retention_mmc0_option;
+	unsigned char	res113[0x14];
+	unsigned int	pad_retention_mmc1_configuration;
+	unsigned int	pad_retention_mmc1_status;
+	unsigned int	pad_retention_mmc1_option;
+	unsigned char	res114[0x14];
+	unsigned int	pad_retention_ebia_configuration;
+	unsigned int	pad_retention_ebia_status;
+	unsigned int	pad_retention_ebia_option;
+	unsigned char	res115[0x14];
+	unsigned int	pad_retention_ebib_configuration;
+	unsigned int	pad_retention_ebib_status;
+	unsigned int	pad_retention_ebib_option;
+	unsigned char	res116[0x14];
+	unsigned int	pad_retention_spi_configuration;
+	unsigned int	pad_retention_spi_status;
+	unsigned int	pad_retention_spi_option;
+	unsigned char	res117[0x14];
+	unsigned int	pad_retention_gpio_dmc_configuration;
+	unsigned int	pad_retention_gpio_dmc_status;
+	unsigned int	pad_retention_gpio_dmc_option;
+	unsigned char	res118[0x14];
+	unsigned int	pad_isolation_configuration;
+	unsigned int	pad_isolation_status;
+	unsigned int	pad_isolation_option;
+	unsigned char	res119[0x74];
+	unsigned int	pad_isolation_dmc_configuration;
+	unsigned int	pad_isolation_dmc_status;
+	unsigned int	pad_isolation_dmc_option;
+	unsigned char	res120[0x74];
+	unsigned int	pad_alv_sel_configuration;
+	unsigned int	pad_alv_sel_status;
+	unsigned int	pad_alv_sel_option0;
+	unsigned int	ps_hold_control;
+	unsigned char	res130[0x110];
+	unsigned int	xxti_configuration;
+	unsigned int	xxti_status;
+	unsigned int	xxti_option;
+	unsigned char	res131[0x10];
+	unsigned int	xxti_duration3;
+	unsigned char	res132[0x1c0];
+	unsigned int	ext_regulator_configuration;
+	unsigned int	ext_regulator_status;
+	unsigned int	ext_regulator_option;
+	unsigned char	res133[0x10];
+	unsigned int	ext_regulator_duration3;
+	unsigned char	res134[0x1e0];
+	unsigned int	gpio_mode_configuration;
+	unsigned int	gpio_mode_status;
+	unsigned int	gpio_mode_option;
+	unsigned char	res135[0xf4];
+	unsigned int	gpio_mode_dmc_configuration;
+	unsigned int	gpio_mode_dmc_status;
+	unsigned int	gpio_mode_dmc_option;
+	unsigned char	res136[0xd4];
+	unsigned int	gpio_mode_mau_configuration;
+	unsigned int	gpio_mode_mau_status;
+	unsigned int	gpio_mode_mau_option;
+	unsigned char	res137[0x14];
+	unsigned int	top_asb_reset_configuration;
+	unsigned int	top_asb_reset_status;
+	unsigned int	top_asb_reset_option;
+	unsigned char	res138[0x14];
+	unsigned int	top_asb_isolation_configuration;
+	unsigned int	top_asb_isolation_status;
+	unsigned int	top_asb_isolation_option;
+	unsigned char	res139[0x5d4];
+	unsigned int	gscl_configuration;
+	unsigned int	gscl_status;
+	unsigned int	gscl_option;
+	unsigned char	res140[0x14];
+	unsigned int	isp_configuration;
+	unsigned int	isp_status;
+	unsigned int	isp_option;
+	unsigned char	res141[0x14];
+	unsigned int	mfc_configuration;
+	unsigned int	mfc_status;
+	unsigned int	mfc_option;
+	unsigned char	res142[0x14];
+	unsigned int	g3d_configuration;
+	unsigned int	g3d_status;
+	unsigned int	g3d_option;
+	unsigned char	res143[0x34];
+	unsigned int	disp1_configuration;
+	unsigned int	disp1_status;
+	unsigned int	disp1_option;
+	unsigned char	res144[0x14];
+	unsigned int	mau_configuration;
+	unsigned int	mau_status;
+	unsigned int	mau_option;
+	unsigned char	res145[0x334];
+	unsigned int	cmu_clkstop_gscl_configuration;
+	unsigned int	cmu_clkstop_gscl_status;
+	unsigned int	cmu_clkstop_gscl_option;
+	unsigned char	res146[0x14];
+	unsigned int	cmu_clkstop_isp_configuration;
+	unsigned int	cmu_clkstop_isp_status;
+	unsigned int	cmu_clkstop_isp_option;
+	unsigned char	res147[0x14];
+	unsigned int	cmu_clkstop_mfc_configuration;
+	unsigned int	cmu_clkstop_mfc_status;
+	unsigned int	cmu_clkstop_mfc_option;
+	unsigned char	res148[0x14];
+	unsigned int	cmu_clkstop_g3d_configuration;
+	unsigned int	cmu_clkstop_g3d_status;
+	unsigned int	cmu_clkstop_g3d_option;
+	unsigned char	res149[0x34];
+	unsigned int	cmu_clkstop_disp1_configuration;
+	unsigned int	cmu_clkstop_disp1_status;
+	unsigned int	cmu_clkstop_disp1_option;
+	unsigned char	res150[0x14];
+	unsigned int	cmu_clkstop_mau_configuration;
+	unsigned int	cmu_clkstop_mau_status;
+	unsigned int	cmu_clkstop_mau_option;
+	unsigned char	res151[0x134];
+	unsigned int	cmu_sysclk_gscl_configuration;
+	unsigned int	cmu_sysclk_gscl_status;
+	unsigned int	cmu_sysclk_gscl_option;
+	unsigned char	res152[0x18];
+	unsigned int	cmu_sysclk_isp_status;
+	unsigned int	cmu_sysclk_isp_option;
+	unsigned char	res153[0x18];
+	unsigned int	cmu_sysclk_mfc_status;
+	unsigned int	cmu_sysclk_mfc_option;
+	unsigned char	res154[0x18];
+	unsigned int	cmu_sysclk_g3d_status;
+	unsigned int	cmu_sysclk_g3d_option;
+	unsigned char	res155[0x38];
+	unsigned int	cmu_sysclk_disp1_status;
+	unsigned int	cmu_sysclk_disp1_option;
+	unsigned char	res156[0x18];
+	unsigned int	cmu_sysclk_mau_status;
+	unsigned int	cmu_sysclk_mau_option;
+	unsigned char	res157[0x534];
+	unsigned int	cmu_reset_gscl_configuration;
+	unsigned int	cmu_reset_gscl_status;
+	unsigned int	cmu_reset_gscl_option;
+	unsigned char	res158[0x14];
+	unsigned int	cmu_reset_isp_configuration;
+	unsigned int	cmu_reset_isp_status;
+	unsigned int	cmu_reset_isp_option;
+	unsigned char	res159[0x14];
+	unsigned int	cmu_reset_mfc_configuration;
+	unsigned int	cmu_reset_mfc_status;
+	unsigned int	cmu_reset_mfc_option;
+	unsigned char	res160[0x14];
+	unsigned int	cmu_reset_g3d_configuration;
+	unsigned int	cmu_reset_g3d_status;
+	unsigned int	cmu_reset_g3d_option;
+	unsigned char	res161[0x34];
+	unsigned int	cmu_reset_disp1_configuration;
+	unsigned int	cmu_reset_disp1_status;
+	unsigned int	cmu_reset_disp1_option;
+	unsigned char	res162[0x14];
+	unsigned int	cmu_reset_mau_configuration;
+	unsigned int	cmu_reset_mau_status;
+	unsigned int	cmu_reset_mau_option;
+	unsigned char	res163[0x24];
+};
+
+struct exynos5420_power {
+	unsigned int	om_stat;
+	unsigned int	lpi_mask0;
+	unsigned int	lpi_mask1;
+	unsigned char	res1[0x10];
+	unsigned int	rtc_clko_sel;
+	unsigned char	res2[0x1e0];
+	unsigned int	central_seq_configuration;
+	unsigned int	central_seq_status;
+	unsigned int	central_seq_option;
+	unsigned char	res3[0x14];
+	unsigned int	seq_transition0;
+	unsigned int	seq_transition1;
+	unsigned int	seq_transition2;
+	unsigned int	seq_transition3;
+	unsigned int	seq_transition4;
+	unsigned int	seq_transition5;
+	unsigned int	seq_transition6;
+	unsigned int	seq_transition7;
+	unsigned int	central_seq_coreblk_configuration;
+	unsigned int	central_seq_coreblk_status;
+	unsigned int	central_seq_coreblk_option;
+	unsigned char	res4[0x14];
+	unsigned int	seq_coreblk_transition0;
+	unsigned int	seq_coreblk_transition1;
+	unsigned int	seq_coreblk_transition2;
+	unsigned int	seq_coreblk_transition3;
+	unsigned int	seq_coreblk_transition4;
+	unsigned int	seq_coreblk_transition5;
+	unsigned int	seq_coreblk_transition6;
+	unsigned int	seq_coreblk_transition7;
+	unsigned char	res5[0x180];
+	unsigned int	swreset;
+	unsigned int	rst_stat;
+	unsigned int	automatic_wdt_reset_disable;
+	unsigned int	mask_wdt_reset_request;
+	unsigned int	mask_wreset_request;
+	unsigned char	res6[0xec];
+	unsigned int	reset_sequencer_configuration;
+	unsigned int	reset_sequencer_status;
+	unsigned int	reset_sequencer_option;
+	unsigned char	res7[0xf4];
+	unsigned int	wakeup_stat;
+	unsigned int	eint_wakeup_mask;
+	unsigned int	wakeup_mask;
+	unsigned int	wakeup_interrupt;
+	unsigned char	res8[0x10];
+	unsigned int	wakeup_stat_coreblk;
+	unsigned int	eint_wakeup_mask_coreblk;
+	unsigned int	wakeup_mask_coreblk;
+	unsigned int	wakeup_interrupt_coreblk;
+	unsigned char	res9[0xd0];
+	unsigned int	hdmi_phy_control;
+	unsigned int	usbdev_phy_control;
+	unsigned int	usbdev1_phy_control;
+	unsigned int	usbhost_phy_control;
+	unsigned char	res104[0x4];
+	unsigned int	mipi_phy0_control;
+	unsigned int	mipi_phy1_control;
+	unsigned int	mipi_phy2_control;
+	unsigned int	adc_phy_control;
+	unsigned int	mtcadc_phy_control;
+	unsigned int	dptx_phy_control;
+	unsigned char	res10[0xd4];
+	unsigned int	inform0;
+	unsigned int	inform1;
+	unsigned int	inform2;
+	unsigned int	inform3;
+	unsigned int	sysip_dat0;
+	unsigned int	sysip_dat1;
+	unsigned int	sysip_dat2;
+	unsigned int	sysip_dat3;
+	unsigned char	res11[0xe0];
+	unsigned int	pmu_spare0;
+	unsigned int	pmu_spare1; /* Store PHY0_CON4 for read leveling */
+	unsigned int	pmu_spare2; /* Store PHY1_CON4 for read leveling */
+	unsigned int	pmu_spare3;
+	unsigned char	res12[0x4];
+	unsigned int	cg_status0;
+	unsigned int	cg_status1;
+	unsigned int	cg_status2;
+	unsigned int	cg_status3;
+	unsigned int	cg_status4;
+	unsigned char	res200[0x58];
+	unsigned int	irom_data_reg0;
+	unsigned int	irom_data_reg1;
+	unsigned int	irom_data_reg2;
+	unsigned int	irom_data_reg3;
+	unsigned char	res13[0x70];
+	unsigned int	pmu_debug;
+	unsigned char	res14[0x5fc];
+	unsigned int	arm_core0_sys_pwr_reg;
+	unsigned char	res500[0xc];
+	unsigned int	arm_core1_sys_pwr_reg;
+	unsigned char	res501[0xc];
+	unsigned int	arm_core2_sys_pwr_reg;
+	unsigned char	res502[0xc];
+	unsigned int	arm_core3_sys_pwr_reg;
+	unsigned char	res503[0xc];
+	unsigned int	kfc_core0_sys_pwr_reg;
+	unsigned char	res504[0xc];
+	unsigned int	kfc_core1_sys_pwr_reg;
+	unsigned char	res505[0xc];
+	unsigned int	kfc_core2_sys_pwr_reg;
+	unsigned char	res506[0xc];
+	unsigned int	kfc_core3_sys_pwr_reg;
+	unsigned char	res507[0x1c];
+	unsigned int	isp_arm_sys_pwr_reg;
+	unsigned char	res18[0xc];
+	unsigned int	arm_common_sys_pwr_reg;
+	unsigned char	res508[0xc];
+	unsigned int	kfc_common_sys_pwr_reg;
+	unsigned char	res19[0xc];
+	unsigned int	arm_l2_sys_pwr_reg;
+	unsigned char	res509[0xc];
+	unsigned int	kfc_l2_sys_pwr_reg;
+	unsigned char	res20[0xc];
+	unsigned int	cmu_cpu_aclkstop_sys_pwr_reg;
+	unsigned int	cmu_cpu_sclkstop_sys_pwr_reg;
+	unsigned char	res510[0x8];
+	unsigned int	cmu_kfc_aclkstop_sys_pwr_reg;
+	unsigned char	res511[0xc];
+	unsigned int	cmu_aclkstop_sys_pwr_reg;
+	unsigned int	cmu_sclkstop_sys_pwr_reg;
+	unsigned char	res21[0x4];
+	unsigned int	cmu_reset_sys_pwr_reg;
+	unsigned char	res22[0x10];
+	unsigned int	cmu_aclkstop_coreblk_sys_pwr_reg;
+	unsigned int	cmu_sclkstop_coreblk_sys_pwr_reg;
+	unsigned char	res23[0x4];
+	unsigned int	cmu_reset_coreblk_sys_pwr_reg;
+	unsigned int	dram_freq_down_sys_pwr_reg;
+	unsigned int	ddrphy_dlloff_sys_pwr_reg;
+	unsigned int	ddrphy_dlllock_sys_pwr_reg;
+	unsigned char	res25[0x4];
+	unsigned int	apll_sysclk_sys_pwr_reg;
+	unsigned int	mpll_sysclk_sys_pwr_reg;
+	unsigned int	vpll_sysclk_sys_pwr_reg;
+	unsigned int	epll_sysclk_sys_pwr_reg;
+	unsigned int	bpll_sysclk_sys_pwr_reg;
+	unsigned int	cpll_sysclk_sys_pwr_reg;
+	unsigned int	dpll_sysclk_sys_pwr_reg;
+	unsigned int	ipll_sysclk_sys_pwr_reg;
+	unsigned int	kpll_sysclk_sys_pwr_reg;
+	unsigned int	mplluser_sysclk_sys_pwr_reg;
+	unsigned char	res512[0x8];
+	unsigned int	bplluser_sysclk_sys_pwr_reg;
+	unsigned int	rpll_sysclk_sys_pwr_reg;
+	unsigned int	spll_sysclk_sys_pwr_reg;
+	unsigned char	res26[0x4];
+	unsigned int	top_bus_sys_pwr_reg;
+	unsigned int	top_retention_sys_pwr_reg;
+	unsigned int	top_pwr_sys_pwr_reg;
+	unsigned char	res29[0x4];
+	unsigned int	top_bus_coreblk_sys_pwr_reg;
+	unsigned int	top_retention_coreblk_sys_pwr_reg;
+	unsigned int	top_pwr_coreblk_sys_pwr_reg;
+	unsigned char	res30[0x4];
+	unsigned int	logic_reset_sys_pwr_reg;
+	unsigned int	oscclk_gate_sys_pwr_reg;
+	unsigned char	res31[0x8];
+	unsigned int	logic_reset_coreblk_sys_pwr_reg;
+	unsigned int	oscclk_gate_coreblk_sys_pwr_reg;
+	unsigned int	intram_mem_sys_pwr_reg;
+	unsigned int	introm_mem_sys_pwr_reg;
+	unsigned char	res32[0x44];
+	unsigned int	pad_retention_mau_sys_pwr_reg;
+	unsigned int	pad_retention_jtag_sys_pwr_reg;
+	unsigned char	res36[0x4];
+	unsigned int	pad_retention_dram_sys_pwr_reg;
+	unsigned int	pad_retention_uart_sys_pwr_reg;
+	unsigned int	pad_retention_mmca_sys_pwr_reg;
+	unsigned int	pad_retention_mmcb_sys_pwr_reg;
+	unsigned int	pad_retention_mmcc_sys_pwr_reg;
+	unsigned int	pad_retention_hsi_sys_pwr_reg;
+	unsigned int	pad_retention_ebia_sys_pwr_reg;
+	unsigned int	pad_retention_ebib_sys_pwr_reg;
+	unsigned int	pad_retention_spi_sys_pwr_reg;
+	unsigned int	pad_retention_dram_coreblk_sys_pwr_reg;
+	unsigned char	res28[0x8];
+	unsigned int	pad_isolation_sys_pwr_reg;
+	unsigned char	res37[0xc];
+	unsigned int	pad_isolation_coreblk_sys_pwr_reg;
+	unsigned char	res38[0xc];
+	unsigned int	pad_alv_sel_sys_pwr_reg;
+	unsigned char	res39[0x1c];
+	unsigned int	xusbxti_sys_pwr_reg;
+	unsigned int	xxti_sys_pwr_reg;
+	unsigned char	res40[0x38];
+	unsigned int	ext_regulator_sys_pwr_reg;
+	unsigned char	res41[0x3c];
+	unsigned int	gpio_mode_sys_pwr_reg;
+	unsigned char	res42[0x1c];
+	unsigned int	gpio_mode_coreblk_sys_pwr_reg;
+	unsigned char	res43[0x1c];
+	unsigned int	gpio_mode_mau_sys_pwr_reg;
+	unsigned int	top_asb_reset_sys_pwr_reg;
+	unsigned int	top_asb_isolation_sys_pwr_reg;
+	unsigned char	res44[0xb4];
+	unsigned int	gscl_sys_pwr_reg;
+	unsigned int	isp_sys_pwr_reg;
+	unsigned int	mfc_sys_pwr_reg;
+	unsigned int	g3d_sys_pwr_reg;
+	unsigned int	disp1_sys_pwr_reg;
+	unsigned int	mau_sys_pwr_reg;
+	unsigned int	g2d_sys_pwr_reg;
+	unsigned int	msc_sys_pwr_reg;
+	unsigned int	fsys_sys_pwr_reg;
+	unsigned int	fsys2_sys_pwr_reg;
+	unsigned int	psgen_sys_pwr_reg;
+	unsigned int	peric_sys_pwr_reg;
+	unsigned int	wcore_sys_pwr_reg;
+	unsigned char	res46[0x4c];
+	unsigned int	cmu_clkstop_gscl_sys_pwr_reg;
+	unsigned int	cmu_clkstop_isp_sys_pwr_reg;
+	unsigned int	cmu_clkstop_mfc_sys_pwr_reg;
+	unsigned int	cmu_clkstop_g3d_sys_pwr_reg;
+	unsigned int	cmu_clkstop_disp1_sys_pwr_reg;
+	unsigned int	cmu_clkstop_mau_sys_pwr_reg;
+	unsigned int	cmu_clkstop_g2d_sys_pwr_reg;
+	unsigned int	cmu_clkstop_msc_sys_pwr_reg;
+	unsigned int	cmu_clkstop_fsys_sys_pwr_reg;
+	unsigned int	cmu_clkstop_fsys2_sys_pwr_reg;
+	unsigned int	cmu_clkstop_psgen_sys_pwr_reg;
+	unsigned int	cmu_clkstop_peric_sys_pwr_reg;
+	unsigned int	cmu_clkstop_wcore_sys_pwr_reg;
+	unsigned char	res48[0x8];
+	unsigned int	cmu_sysclk_toppwr_sys_pwr_reg;
+	unsigned int	cmu_sysclk_gscl_sys_pwr_reg;
+	unsigned int	cmu_sysclk_isp_sys_pwr_reg;
+	unsigned int	cmu_sysclk_mfc_sys_pwr_reg;
+	unsigned int	cmu_sysclk_g3d_sys_pwr_reg;
+	unsigned int	cmu_sysclk_disp1_sys_pwr_reg;
+	unsigned int	cmu_sysclk_mau_sys_pwr_reg;
+	unsigned int	cmu_sysclk_g2d_sys_pwr_reg;
+	unsigned int	cmu_sysclk_msc_sys_pwr_reg;
+	unsigned int	cmu_sysclk_fsys_sys_pwr_reg;
+	unsigned int	cmu_sysclk_fsys2_sys_pwr_reg;
+	unsigned int	cmu_sysclk_psgen_sys_pwr_reg;
+	unsigned int	cmu_sysclk_peric_sys_pwr_reg;
+	unsigned int	cmu_sysclk_wcore_sys_pwr_reg;
+	unsigned int	cmu_sysclk_coreblk_toppwr_sys_pwr_reg;
+	unsigned char	res50[0x78];
+	unsigned int	cmu_reset_fsys2_sys_pwr_reg;
+	unsigned int	cmu_reset_psgen_sys_pwr_reg;
+	unsigned int	cmu_reset_peric_sys_pwr_reg;
+	unsigned int	cmu_reset_wcore_sys_pwr_reg;
+	unsigned int	cmu_reset_gscl_sys_pwr_reg;
+	unsigned int	cmu_reset_isp_sys_pwr_reg;
+	unsigned int	cmu_reset_mfc_sys_pwr_reg;
+	unsigned int	cmu_reset_g3d_sys_pwr_reg;
+	unsigned int	cmu_reset_disp1_sys_pwr_reg;
+	unsigned int	cmu_reset_mau_sys_pwr_reg;
+	unsigned int	cmu_reset_g2d_sys_pwr_reg;
+	unsigned int	cmu_reset_msc_sys_pwr_reg;
+	unsigned int	cmu_reset_fsys_sys_pwr_reg;
+	unsigned char	res52[0xa5c];
+	unsigned int	arm_core0_configuration;
+	unsigned int	arm_core0_status;
+	unsigned int	arm_core0_option;
+	unsigned char	res53[0x14];
+	unsigned int	dis_irq_arm_core0_local_configuration;
+	unsigned int	dis_irq_arm_core0_local_status;
+	unsigned int	dis_irq_arm_core0_local_option;
+	unsigned char	res54[0x14];
+	unsigned int	dis_irq_arm_core0_central_configuration;
+	unsigned int	dis_irq_arm_core0_central_status;
+	unsigned int	dis_irq_arm_core0_central_option;
+	unsigned char	res55[0x34];
+	unsigned int	arm_core1_configuration;
+	unsigned int	arm_core1_status;
+	unsigned int	arm_core1_option;
+	unsigned char	res56[0x14];
+	unsigned int	dis_irq_arm_core1_local_configuration;
+	unsigned int	dis_irq_arm_core1_local_status;
+	unsigned int	dis_irq_arm_core1_local_option;
+	unsigned char	res57[0x14];
+	unsigned int	dis_irq_arm_core1_central_configuration;
+	unsigned int	dis_irq_arm_core1_central_status;
+	unsigned int	dis_irq_arm_core1_central_option;
+	unsigned char	res600[0x34];
+	unsigned int	arm_core2_configuration;
+	unsigned int	arm_core2_status;
+	unsigned int	arm_core2_option;
+	unsigned char	res601[0x14];
+	unsigned int	dis_irq_arm_core2_local_configuration;
+	unsigned int	dis_irq_arm_core2_local_status;
+	unsigned int	dis_irq_arm_core2_local_option;
+	unsigned char	res602[0x14];
+	unsigned int	dis_irq_arm_core2_central_configuration;
+	unsigned int	dis_irq_arm_core2_central_status;
+	unsigned int	dis_irq_arm_core2_central_option;
+	unsigned char	res603[0x34];
+	unsigned int	arm_core3_configuration;
+	unsigned int	arm_core3_status;
+	unsigned int	arm_core3_option;
+	unsigned char	res900[0x14];
+	unsigned int	dis_irq_arm_core3_local_configuration;
+	unsigned int	dis_irq_arm_core3_local_status;
+	unsigned int	dis_irq_arm_core3_local_option;
+	unsigned char	res901[0x14];
+	unsigned int	dis_irq_arm_core3_central_configuration;
+	unsigned int	dis_irq_arm_core3_central_status;
+	unsigned int	dis_irq_arm_core3_central_option;
+	unsigned char	res604[0x34];
+	unsigned int	kfc_core0_configuration;
+	unsigned int	kfc_core0_status;
+	unsigned int	kfc_core0_option;
+	unsigned char	res605[0x14];
+	unsigned int	dis_irq_kfc_core0_local_configuration;
+	unsigned int	dis_irq_kfc_core0_local_status;
+	unsigned int	dis_irq_kfc_core0_local_option;
+	unsigned char	res606[0x14];
+	unsigned int	dis_irq_kfc_core0_central_configuration;
+	unsigned int	dis_irq_kfc_core0_central_status;
+	unsigned int	dis_irq_kfc_core0_central_option;
+	unsigned char	res607[0x34];
+	unsigned int	kfc_core1_configuration;
+	unsigned int	kfc_core1_status;
+	unsigned int	kfc_core1_option;
+	unsigned char	res608[0x14];
+	unsigned int	dis_irq_kfc_core1_local_configuration;
+	unsigned int	dis_irq_kfc_core1_local_status;
+	unsigned int	dis_irq_kfc_core1_local_option;
+	unsigned char	res609[0x14];
+	unsigned int	dis_irq_kfc_core1_central_configuration;
+	unsigned int	dis_irq_kfc_core1_central_status;
+	unsigned int	dis_irq_kfc_core1_central_option;
+	unsigned char	res610[0x34];
+	unsigned int	kfc_core2_configuration;
+	unsigned int	kfc_core2_status;
+	unsigned int	kfc_core2_option;
+	unsigned char	res611[0x14];
+	unsigned int	dis_irq_kfc_core2_local_configuration;
+	unsigned int	dis_irq_kfc_core2_local_status;
+	unsigned int	dis_irq_kfc_core2_local_option;
+	unsigned char	res612[0x14];
+	unsigned int	dis_irq_kfc_core2_central_configuration;
+	unsigned int	dis_irq_kfc_core2_central_status;
+	unsigned int	dis_irq_kfc_core2_central_option;
+	unsigned char	res613[0x34];
+	unsigned int	kfc_core3_configuration;
+	unsigned int	kfc_core3_status;
+	unsigned int	kfc_core3_option;
+	unsigned char	res614[0x14];
+	unsigned int	dis_irq_kfc_core3_local_configuration;
+	unsigned int	dis_irq_kfc_core3_local_status;
+	unsigned int	dis_irq_kfc_core3_local_option;
+	unsigned char	res615[0x14];
+	unsigned int	dis_irq_kfc_core3_central_configuration;
+	unsigned int	dis_irq_kfc_core3_central_status;
+	unsigned int	dis_irq_kfc_core3_central_option;
+	unsigned char	res61[0xb4];
+	unsigned int	isp_arm_configuration;
+	unsigned int	isp_arm_status;
+	unsigned int	isp_arm_option;
+	unsigned char	res62[0x14];
+	unsigned int	dis_irq_isp_arm_local_configuration;
+	unsigned int	dis_irq_isp_arm_local_status;
+	unsigned int	dis_irq_isp_arm_local_option;
+	unsigned char	res63[0x14];
+	unsigned int	dis_irq_isp_arm_central_configuration;
+	unsigned int	dis_irq_isp_arm_central_status;
+	unsigned int	dis_irq_isp_arm_central_option;
+	unsigned char	res64[0x34];
+	unsigned int	arm_common_configuration;
+	unsigned int	arm_common_status;
+	unsigned int	arm_common_option;
+	unsigned char	res616[0x74];
+	unsigned int	kfc_common_configuration;
+	unsigned int	kfc_common_status;
+	unsigned int	kfc_common_option;
+	unsigned char	res65[0x74];
+	unsigned int	arm_l2_configuration;
+	unsigned int	arm_l2_status;
+	unsigned int	arm_l2_option;
+	unsigned char	res617[0x74];
+	unsigned int	kfc_l2_configuration;
+	unsigned int	kfc_l2_status;
+	unsigned int	kfc_l2_option;
+	unsigned char	res66[0x74];
+	unsigned int	cmu_cpu_aclkstop_configuration;
+	unsigned int	cmu_cpu_aclkstop_status;
+	unsigned int	cmu_cpu_aclkstop_option;
+	unsigned char	res67[0x14];
+	unsigned int	cmu_cpu_sclkstop_configuration;
+	unsigned int	cmu_cpu_sclkstop_status;
+	unsigned int	cmu_cpu_sclkstop_option;
+	unsigned char	res618[0x4];
+	unsigned int	cmu_kfc_aclkstop_configuration;
+	unsigned int	cmu_kfc_aclkstop_status;
+	unsigned int	cmu_kfc_aclkstop_option;
+	unsigned char	res619[0xc4];
+	unsigned int	cmu_aclkstop_configuration;
+	unsigned int	cmu_aclkstop_status;
+	unsigned int	cmu_aclkstop_option;
+	unsigned char	res620[0x14];
+	unsigned int	cmu_sclkstop_configuration;
+	unsigned int	cmu_sclkstop_status;
+	unsigned int	cmu_sclkstop_option;
+	unsigned char	res68[0x34];
+	unsigned int	cmu_reset_configuration;
+	unsigned int	cmu_reset_status;
+	unsigned int	cmu_reset_option;
+	unsigned char	res69[0x94];
+	unsigned int	cmu_aclkstop_coreblk_configuration;
+	unsigned int	cmu_aclkstop_coreblk_status;
+	unsigned int	cmu_aclkstop_coreblk_option;
+	unsigned char	res70[0x14];
+	unsigned int	cmu_sclkstop_coreblk_configuration;
+	unsigned int	cmu_sclkstop_coreblk_status;
+	unsigned int	cmu_sclkstop_coreblk_option;
+	unsigned char	res71[0x34];
+	unsigned int	cmu_reset_coreblk_configuration;
+	unsigned int	cmu_reset_coreblk_status;
+	unsigned int	cmu_reset_coreblk_option;
+	unsigned char	res621[0x14];
+	unsigned int	dram_freq_down_configuration;
+	unsigned int	dram_freq_down_status;
+	unsigned int	dram_freq_down_option;
+	unsigned char	res622[0x14];
+	unsigned int	ddrphy_dlloff_configuration;
+	unsigned int	ddrphy_dlloff_status;
+	unsigned int	ddrphy_dlloff_option;
+	unsigned char	res72[0x14];
+	unsigned int	ddrphy_dlllock_configuration;
+	unsigned int	ddrphy_dlllock_status;
+	unsigned int	ddrphy_dlllock_option;
+	unsigned char	res73[0x34];
+	unsigned int	apll_sysclk_configuration;
+	unsigned int	apll_sysclk_status;
+	unsigned int	apll_sysclk_option;
+	unsigned char	res74[0x18];
+	unsigned int	mpll_sysclk_status;
+	unsigned int	mpll_sysclk_option;
+	unsigned char	res75[0x14];
+	unsigned int	vpll_sysclk_configuration;
+	unsigned int	vpll_sysclk_status;
+	unsigned int	vpll_sysclk_option;
+	unsigned char	res76[0x14];
+	unsigned int	epll_sysclk_configuration;
+	unsigned int	epll_sysclk_status;
+	unsigned int	epll_sysclk_option;
+	unsigned char	res77[0x14];
+	unsigned int	bpll_sysclk_configuration;
+	unsigned int	bpll_sysclk_status;
+	unsigned int	bpll_sysclk_option;
+	unsigned char	res78[0x14];
+	unsigned int	cpll_sysclk_configuration;
+	unsigned int	cpll_sysclk_status;
+	unsigned int	cpll_sysclk_option;
+	unsigned char	res79[0x14];
+	unsigned int	dpll_sysclk_configuration;
+	unsigned int	dpll_sysclk_status;
+	unsigned int	dpll_sysclk_option;
+	unsigned char	res700[0x14];
+	unsigned int	ipll_sysclk_configuration;
+	unsigned int	ipll_sysclk_status;
+	unsigned int	ipll_sysclk_option;
+	unsigned char	res903[0x14];
+	unsigned int	kpll_sysclk_configuration;
+	unsigned int	kpll_sysclk_status;
+	unsigned int	kpll_sysclk_option;
+	unsigned char	res80[0x14];
+	unsigned int	mplluser_sysclk_configuration;
+	unsigned int	mplluser_sysclk_status;
+	unsigned int	mplluser_sysclk_option;
+	unsigned char	res81[0x54];
+	unsigned int	bplluser_sysclk_configuration;
+	unsigned int	bplluser_sysclk_status;
+	unsigned int	bplluser_sysclk_option;
+	unsigned char	res701[0x14];
+	unsigned int	rplluser_sysclk_configuration;
+	unsigned int	rplluser_sysclk_status;
+	unsigned int	rplluser_sysclk_option;
+	unsigned char	res702[0x14];
+	unsigned int	splluser_sysclk_configuration;
+	unsigned int	splluser_sysclk_status;
+	unsigned int	splluser_sysclk_option;
+	unsigned char	res82[0x34];
+	unsigned int	top_bus_configuration;
+	unsigned int	top_bus_status;
+	unsigned int	top_bus_option;
+	unsigned char	res83[0x14];
+	unsigned int	top_retention_configuration;
+	unsigned int	top_retention_status;
+	unsigned int	top_retention_option;
+	unsigned char	res84[0x14];
+	unsigned int	top_pwr_configuration;
+	unsigned int	top_pwr_status;
+	unsigned int	top_pwr_option;
+	unsigned char	res85[0x34];
+	unsigned int	top_bus_coreblk_configuration;
+	unsigned int	top_bus_coreblk_status;
+	unsigned int	top_bus_coreblk_option;
+	unsigned char	res86[0x14];
+	unsigned int	top_retention_coreblk_configuration;
+	unsigned int	top_retention_coreblk_status;
+	unsigned int	top_retention_coreblk_option;
+	unsigned char	res87[0x14];
+	unsigned int	top_pwr_coreblk_configuration;
+	unsigned int	top_pwr_coreblk_status;
+	unsigned int	top_pwr_coreblk_option;
+	unsigned char	res88[0x34];
+	unsigned int	logic_reset_configuration;
+	unsigned int	logic_reset_status;
+	unsigned int	logic_reset_option;
+	unsigned char	res89[0x14];
+	unsigned int	oscclk_gate_configuration;
+	unsigned int	oscclk_gate_status;
+	unsigned int	oscclk_gate_option;
+	unsigned char	res90[0x54];
+	unsigned int	logic_reset_coreblk_configuration;
+	unsigned int	logic_reset_coreblk_status;
+	unsigned int	logic_reset_coreblk_option;
+	unsigned char	res91[0x14];
+	unsigned int	oscclk_gate_coreblk_configuration;
+	unsigned int	oscclk_gate_coreblk_status;
+	unsigned int	oscclk_gate_coreblk_option;
+	unsigned char	res99[0x174];
+	unsigned int	intram_mem_configuration;
+	unsigned int	intram_mem_status;
+	unsigned int	intram_mem_option;
+	unsigned char	res100[0x14];
+	unsigned int	introm_mem_configuration;
+	unsigned int	introm_mem_status;
+	unsigned int	introm_mem_option;
+	unsigned char	res101[0xb4];
+	unsigned int	pad_retention_dram_configuration;
+	unsigned int	pad_retention_dram_status;
+	unsigned int	pad_retention_dram_option;
+	unsigned char	res106[0x14];
+	unsigned int	pad_retention_mau_configuration;
+	unsigned int	pad_retention_mau_status;
+	unsigned int	pad_retention_mau_option;
+	unsigned char	res107[0x14];
+	unsigned int	pad_retention_jtag_configuration;
+	unsigned int	pad_retention_jtag_status;
+	unsigned int	pad_retention_jtag_option;
+	unsigned char	res92[0x74];
+	unsigned int	pad_retention_dram_configuration_2;
+	unsigned int	pad_retention_dram_status_2;
+	unsigned int	pad_retention_dram_option_2;
+	unsigned char	res111[0x14];
+	unsigned int	pad_retention_uart_configuration;
+	unsigned int	pad_retention_uart_status;
+	unsigned int	pad_retention_uart_option;
+	unsigned char	res112[0x14];
+	unsigned int	pad_retention_mmca_configuration;
+	unsigned int	pad_retention_mmca_status;
+	unsigned int	pad_retention_mmca_option;
+	unsigned char	res113[0x14];
+	unsigned int	pad_retention_mmcb_configuration;
+	unsigned int	pad_retention_mmcb_status;
+	unsigned int	pad_retention_mmcb_option;
+	unsigned char	res93[0x14];
+	unsigned int	pad_retention_mmcc_configuration;
+	unsigned int	pad_retention_mmcc_status;
+	unsigned int	pad_retention_mmcc_option;
+	unsigned char	res94[0x14];
+	unsigned int	pad_retention_hsi_configuration;
+	unsigned int	pad_retention_hsi_status;
+	unsigned int	pad_retention_hsi_option;
+	unsigned char	res114[0x14];
+	unsigned int	pad_retention_ebia_configuration;
+	unsigned int	pad_retention_ebia_status;
+	unsigned int	pad_retention_ebia_option;
+	unsigned char	res115[0x14];
+	unsigned int	pad_retention_ebib_configuration;
+	unsigned int	pad_retention_ebib_status;
+	unsigned int	pad_retention_ebib_option;
+	unsigned char	res116[0x14];
+	unsigned int	pad_retention_spi_configuration;
+	unsigned int	pad_retention_spi_status;
+	unsigned int	pad_retention_spi_option;
+	unsigned char	res117[0x14];
+	unsigned int	pad_retention_dram_coreblk_configuration;
+	unsigned int	pad_retention_dram_coreblk_status;
+	unsigned int	pad_retention_dram_coreblk_option;
+	unsigned char	res118[0x14];
+	unsigned int	pad_isolation_configuration;
+	unsigned int	pad_isolation_status;
+	unsigned int	pad_isolation_option;
+	unsigned char	res119[0x74];
+	unsigned int	pad_isolation_coreblk_configuration;
+	unsigned int	pad_isolation_coreblk_status;
+	unsigned int	pad_isolation_coreblk_option;
+	unsigned char	res120[0x74];
+	unsigned int	pad_alv_sel_configuration;
+	unsigned int	pad_alv_sel_status;
+	unsigned int	pad_alv_sel_option0;
+	unsigned int	ps_hold_control;
+	unsigned char	res130[0xf0];
+	unsigned int	xusbxti_configuration;
+	unsigned int	xusbxti_status;
+	unsigned int	xusbxti_option;
+	unsigned char	res910[0x10];
+	unsigned int	xusbxti_duration3;
+	unsigned int	xxti_configuration;
+	unsigned int	xxti_status;
+	unsigned int	xxti_option;
+	unsigned char	res131[0x10];
+	unsigned int	xxti_duration3;
+	unsigned char	res132[0x1c0];
+	unsigned int	ext_regulator_configuration;
+	unsigned int	ext_regulator_status;
+	unsigned int	ext_regulator_option;
+	unsigned char	res133[0x10];
+	unsigned int	ext_regulator_duration3;
+	unsigned char	res134[0x1e0];
+	unsigned int	gpio_mode_configuration;
+	unsigned int	gpio_mode_status;
+	unsigned int	gpio_mode_option;
+	unsigned char	res135[0xf4];
+	unsigned int	gpio_mode_coreblk_configuration;
+	unsigned int	gpio_mode_coreblk_status;
+	unsigned int	gpio_mode_coreblk_option;
+	unsigned char	res136[0xd4];
+	unsigned int	gpio_mode_mau_configuration;
+	unsigned int	gpio_mode_mau_status;
+	unsigned int	gpio_mode_mau_option;
+	unsigned char	res137[0x14];
+	unsigned int	top_asb_reset_configuration;
+	unsigned int	top_asb_reset_status;
+	unsigned int	top_asb_reset_option;
+	unsigned char	res138[0x14];
+	unsigned int	top_asb_isolation_configuration;
+	unsigned int	top_asb_isolation_status;
+	unsigned int	top_asb_isolation_option;
+	unsigned char	res139[0x5d4];
+	unsigned int	gscl_configuration;
+	unsigned int	gscl_status;
+	unsigned int	gscl_option;
+	unsigned char	res140[0x14];
+	unsigned int	isp_configuration;
+	unsigned int	isp_status;
+	unsigned int	isp_option;
+	unsigned char	res141[0x34];
+	unsigned int	mfc_configuration;
+	unsigned int	mfc_status;
+	unsigned int	mfc_option;
+	unsigned char	res142[0x14];
+	unsigned int	g3d_configuration;
+	unsigned int	g3d_status;
+	unsigned int	g3d_option;
+	unsigned char	res143[0x34];
+	unsigned int	disp1_configuration;
+	unsigned int	disp1_status;
+	unsigned int	disp1_option;
+	unsigned char	res144[0x14];
+	unsigned int	mau_configuration;
+	unsigned int	mau_status;
+	unsigned int	mau_option;
+	unsigned char	res800[0x14];
+	unsigned int	g2d_configuration;
+	unsigned int	g2d_status;
+	unsigned int	g2d_option;
+	unsigned char	res801[0x14];
+	unsigned int	msc_configuration;
+	unsigned int	msc_status;
+	unsigned int	msc_option;
+	unsigned char	res802[0x14];
+	unsigned int	fsys_configuration;
+	unsigned int	fsys_status;
+	unsigned int	fsys_option;
+	unsigned char	res803[0x14];
+	unsigned int	fsys2_configuration;
+	unsigned int	fsys2_status;
+	unsigned int	fsys2_option;
+	unsigned char	res804[0x14];
+	unsigned int	psgen_configuration;
+	unsigned int	psgen_status;
+	unsigned int	psgen_option;
+	unsigned char	res805[0x14];
+	unsigned int	peric_configuration;
+	unsigned int	peric_status;
+	unsigned int	peric_option;
+	unsigned char	res806[0x14];
+	unsigned int	wcore_configuration;
+	unsigned int	wcore_status;
+	unsigned int	wcore_option;
+	unsigned char	res145[0x234];
+	unsigned int	cmu_clkstop_gscl_configuration;
+	unsigned int	cmu_clkstop_gscl_status;
+	unsigned int	cmu_clkstop_gscl_option;
+	unsigned char	res146[0x14];
+	unsigned int	cmu_clkstop_isp_configuration;
+	unsigned int	cmu_clkstop_isp_status;
+	unsigned int	cmu_clkstop_isp_option;
+	unsigned char	res147[0x34];
+	unsigned int	cmu_clkstop_mfc_configuration;
+	unsigned int	cmu_clkstop_mfc_status;
+	unsigned int	cmu_clkstop_mfc_option;
+	unsigned char	res148[0x14];
+	unsigned int	cmu_clkstop_g3d_configuration;
+	unsigned int	cmu_clkstop_g3d_status;
+	unsigned int	cmu_clkstop_g3d_option;
+	unsigned char	res149[0x34];
+	unsigned int	cmu_clkstop_disp1_configuration;
+	unsigned int	cmu_clkstop_disp1_status;
+	unsigned int	cmu_clkstop_disp1_option;
+	unsigned char	res150[0x14];
+	unsigned int	cmu_clkstop_mau_configuration;
+	unsigned int	cmu_clkstop_mau_status;
+	unsigned int	cmu_clkstop_mau_option;
+	unsigned char	res807[0x14];
+	unsigned int	cmu_clkstop_g2d_configuration;
+	unsigned int	cmu_clkstop_g2d_status;
+	unsigned int	cmu_clkstop_g2d_option;
+	unsigned char	res808[0x14];
+	unsigned int	cmu_clkstop_msc_configuration;
+	unsigned int	cmu_clkstop_msc_status;
+	unsigned int	cmu_clkstop_msc_option;
+	unsigned char	res809[0x14];
+	unsigned int	cmu_clkstop_fsys_configuration;
+	unsigned int	cmu_clkstop_fsys_status;
+	unsigned int	cmu_clkstop_fsys_option;
+	unsigned char	res810[0x14];
+	unsigned int	cmu_clkstop_fsys2_configuration;
+	unsigned int	cmu_clkstop_fsys2_status;
+	unsigned int	cmu_clkstop_fsys2_option;
+	unsigned char	res811[0x14];
+	unsigned int	cmu_clkstop_psgen_configuration;
+	unsigned int	cmu_clkstop_psgen_status;
+	unsigned int	cmu_clkstop_psgen_option;
+	unsigned char	res812[0x14];
+	unsigned int	cmu_clkstop_peric_configuration;
+	unsigned int	cmu_clkstop_peric_status;
+	unsigned int	cmu_clkstop_peric_option;
+	unsigned char	res813[0x14];
+	unsigned int	cmu_clkstop_wcore_configuration;
+	unsigned int	cmu_clkstop_wcore_status;
+	unsigned int	cmu_clkstop_wcore_option;
+	unsigned char	res151[0x14];
+	unsigned int	cmu_sysclk_toppwr_configuration;
+	unsigned int	cmu_sysclk_toppwr_status;
+	unsigned int	cmu_sysclk_toppwr_option;
+	unsigned char	res920[0x18];
+	unsigned int	cmu_sysclk_gscl_status;
+	unsigned int	cmu_sysclk_gscl_option;
+	unsigned char	res152[0x18];
+	unsigned int	cmu_sysclk_isp_status;
+	unsigned int	cmu_sysclk_isp_option;
+	unsigned char	res153[0x38];
+	unsigned int	cmu_sysclk_mfc_status;
+	unsigned int	cmu_sysclk_mfc_option;
+	unsigned char	res154[0x18];
+	unsigned int	cmu_sysclk_g3d_status;
+	unsigned int	cmu_sysclk_g3d_option;
+	unsigned char	res155[0x38];
+	unsigned int	cmu_sysclk_disp1_status;
+	unsigned int	cmu_sysclk_disp1_option;
+	unsigned char	res156[0x18];
+	unsigned int	cmu_sysclk_mau_status;
+	unsigned int	cmu_sysclk_mau_option;
+	unsigned char	res814[0x18];
+	unsigned int	cmu_sysclk_g2d_status;
+	unsigned int	cmu_sysclk_g2d_option;
+	unsigned char	res815[0x18];
+	unsigned int	cmu_sysclk_msc_status;
+	unsigned int	cmu_sysclk_msc_option;
+	unsigned char	res922[0x18];
+	unsigned int	cmu_sysclk_fsys_status;
+	unsigned int	cmu_sysclk_fsys_option;
+	unsigned char	res816[0x18];
+	unsigned int	cmu_sysclk_fsys2_status;
+	unsigned int	cmu_sysclk_fsys2_option;
+	unsigned char	res817[0x18];
+	unsigned int	cmu_sysclk_psgen_status;
+	unsigned int	cmu_sysclk_psgen_option;
+	unsigned char	res950[0x18];
+	unsigned int	cmu_sysclk_peric_status;
+	unsigned int	cmu_sysclk_peric_option;
+	unsigned char	res818[0x18];
+	unsigned int	cmu_sysclk_wcore_status;
+	unsigned int	cmu_sysclk_wcore_option;
+	unsigned char	res819[0x18];
+	unsigned int	cmu_sysclk_coreblk_toppwr_status;
+	unsigned int	cmu_sysclk_coreblk_toppwr_option;
+	unsigned char	res157[0x414];
+	unsigned int	cmu_reset_gscl_configuration;
+	unsigned int	cmu_reset_gscl_status;
+	unsigned int	cmu_reset_gscl_option;
+	unsigned char	res158[0x14];
+	unsigned int	cmu_reset_isp_configuration;
+	unsigned int	cmu_reset_isp_status;
+	unsigned int	cmu_reset_isp_option;
+	unsigned char	res159[0x34];
+	unsigned int	cmu_reset_mfc_configuration;
+	unsigned int	cmu_reset_mfc_status;
+	unsigned int	cmu_reset_mfc_option;
+	unsigned char	res160[0x14];
+	unsigned int	cmu_reset_g3d_configuration;
+	unsigned int	cmu_reset_g3d_status;
+	unsigned int	cmu_reset_g3d_option;
+	unsigned char	res161[0x34];
+	unsigned int	cmu_reset_disp1_configuration;
+	unsigned int	cmu_reset_disp1_status;
+	unsigned int	cmu_reset_disp1_option;
+	unsigned char	res162[0x14];
+	unsigned int	cmu_reset_mau_configuration;
+	unsigned int	cmu_reset_mau_status;
+	unsigned int	cmu_reset_mau_option;
+	unsigned char	res163[0x14];
+	unsigned int	version_info;
+	unsigned int	i2s_bypass;
+	unsigned int	kfc_swreset_mask_from_eagle;
+	unsigned char	res164[0xf4];
+	unsigned int	cmu_reset_g2d_configuration;
+	unsigned int	cmu_reset_g2d_status;
+	unsigned int	cmu_reset_g2d_option;
+	unsigned char	res165[0x14];
+	unsigned int	cmu_reset_msc_configuration;
+	unsigned int	cmu_reset_msc_status;
+	unsigned int	cmu_reset_msc_option;
+	unsigned char	res166[0x14];
+	unsigned int	cmu_reset_fsys_configuration;
+	unsigned int	cmu_reset_fsys_status;
+	unsigned int	cmu_reset_fsys_option;
+	unsigned char	res167[0x14];
+	unsigned int	cmu_reset_fsys2_configuration;
+	unsigned int	cmu_reset_fsys2_status;
+	unsigned int	cmu_reset_fsys2_option;
+	unsigned char	res168[0x14];
+	unsigned int	cmu_reset_psgen_configuration;
+	unsigned int	cmu_reset_psgen_status;
+	unsigned int	cmu_reset_psgen_option;
+	unsigned char	res169[0x14];
+	unsigned int	cmu_reset_peric_configuration;
+	unsigned int	cmu_reset_peric_status;
+	unsigned int	cmu_reset_peric_option;
+	unsigned char	res170[0x14];
+	unsigned int	cmu_reset_wcore_configuration;
+	unsigned int	cmu_reset_wcore_status;
+	unsigned int	cmu_reset_wcore_option;
+};
+#endif	/* __ASSEMBLY__ */
+
+#define OM_PIN_BITS	0x1f
+#define OM_PIN_SHIFT	0x1
+#define OM_PIN_MASK	(OM_PIN_BITS << OM_PIN_SHIFT)
+
+enum {
+	/*
+	 * Assign the OM pin values for respective boot modes.
+	 * Exynos4 does not support spi boot and the mmc boot OM
+	 * pin values are the same across Exynos4 and Exynos5.
+	 */
+	BOOT_MODE_SD = 4,      /* SD_CH2  | USB */
+	BOOT_MODE_EMMC = 8,     /* EMMC4.4 | USB */
+	BOOT_MODE_EMMC_SD = 40, /* EMMC4.4 | SD_CH2 */
+	BOOT_MODE_SERIAL = 20,
+	/* Boot based on Operating Mode pin settings */
+	BOOT_MODE_OM = 32,
+	BOOT_MODE_USB,	/* Boot using USB download */
+};
+
+unsigned int get_boot_mode(void);
+
+void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
+
+#define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
+#define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
+#define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
+
+void set_usbhost_phy_ctrl(unsigned int enable);
+
+/* Enables hardware tripping to power off the system when TMU fails */
+void set_hw_thermal_trip(void);
+
+#define POWER_USB_HOST_PHY_CTRL_EN		(1 << 0)
+#define POWER_USB_HOST_PHY_CTRL_DISABLE		(0 << 0)
+
+void set_usbdrd_phy_ctrl(unsigned int enable);
+
+#define POWER_USB_DRD_PHY_CTRL_EN		(1 << 0)
+#define POWER_USB_DRD_PHY_CTRL_DISABLE		(0 << 0)
+
+void exynos_dp_phy_ctrl(unsigned int enable);
+
+#define EXYNOS_DP_PHY_ENABLE		(1 << 0)
+
+#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH	(1 << 8)
+#define POWER_ENABLE_HW_TRIP			(1UL << 31)
+
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
+void set_ps_hold_ctrl(void);
+
+/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */
+#define PMU_DEBUG_XXTI                          0x1000
+/* Mask bit[12:8] for xxti clock selection */
+#define PMU_DEBUG_CLKOUT_SEL_MASK               0x1f00
+
+/*
+ * Pmu debug is used for xclkout, enable xclkout with
+ * source as XXTI
+ */
+void set_xclkout(void);
+
+/*
+ *  Read inform1 to get the reset status.
+ *  @return: the value can be either S5P_CHECK_SLEEP or
+ *  S5P_CHECK_DIDLE or S5P_CHECK_LPA as stored in inform1
+ *  if none of these then its normal booting.
+ */
+uint32_t get_reset_status(void);
+
+
+/* Read the resume function and call it */
+void power_exit_wakeup(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/pwm.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/pwm.h
new file mode 100644
index 000000000..417fc1555
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/pwm.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_PWM_H_
+#define __ASM_ARM_ARCH_PWM_H_
+
+#define PRESCALER_0		(8 - 1)		/* prescaler of timer 0, 1 */
+#define PRESCALER_1		(16 - 1)	/* prescaler of timer 2, 3, 4 */
+
+/* Divider MUX */
+#define MUX_DIV_1		0		/* 1/1 period */
+#define MUX_DIV_2		1		/* 1/2 period */
+#define MUX_DIV_4		2		/* 1/4 period */
+#define MUX_DIV_8		3		/* 1/8 period */
+#define MUX_DIV_16		4		/* 1/16 period */
+
+#define MUX_DIV_SHIFT(x)	(x * 4)
+
+#define TCON_OFFSET(x)		((x + 1) * (!!x) << 2)
+
+#define TCON_START(x)		(1 << TCON_OFFSET(x))
+#define TCON_UPDATE(x)		(1 << (TCON_OFFSET(x) + 1))
+#define TCON_INVERTER(x)	(1 << (TCON_OFFSET(x) + 2))
+#define TCON_AUTO_RELOAD(x)	(1 << (TCON_OFFSET(x) + 3))
+#define TCON4_AUTO_RELOAD	(1 << 22)
+
+#ifndef __ASSEMBLY__
+struct s5p_timer {
+	unsigned int	tcfg0;
+	unsigned int	tcfg1;
+	unsigned int	tcon;
+	unsigned int	tcntb0;
+	unsigned int	tcmpb0;
+	unsigned int	tcnto0;
+	unsigned int	tcntb1;
+	unsigned int	tcmpb1;
+	unsigned int	tcnto1;
+	unsigned int	tcntb2;
+	unsigned int	tcmpb2;
+	unsigned int	tcnto2;
+	unsigned int	tcntb3;
+	unsigned int	tcmpb3;
+	unsigned int	tcnto3;
+	unsigned int	tcntb4;
+	unsigned int	tcnto4;
+	unsigned int	tintcstat;
+};
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/pwm_backlight.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/pwm_backlight.h
new file mode 100644
index 000000000..c7d3a91e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/pwm_backlight.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#ifndef _PWM_BACKLIGHT_H_
+#define _PWM_BACKLIGHT_H_
+
+struct pwm_backlight_data {
+	int pwm_id;
+	int period;
+	int max_brightness;
+	int brightness;
+};
+
+extern int exynos_pwm_backlight_init(struct pwm_backlight_data *pd);
+
+#endif /* _PWM_BACKLIGHT_H_ */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/sound.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/sound.h
new file mode 100644
index 000000000..1a40e35f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/sound.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ */
+
+
+#ifndef __SOUND_ARCH_H__
+#define __SOUND_ARCH_H__
+
+/* I2S values */
+#define I2S_PLL_CLK		192000000
+#define I2S_SAMPLING_RATE	48000
+#define I2S_BITS_PER_SAMPLE	16
+#define I2S_CHANNELS		2
+#define I2S_RFS			256
+#define I2S_BFS			32
+
+/* I2C values */
+#define AUDIO_I2C_BUS		1
+#define AUDIO_I2C_REG		0x1a
+
+/* Audio Codec */
+#define AUDIO_CODEC		"wm8994"
+
+#define AUDIO_COMPAT		1
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/spi.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/spi.h
new file mode 100644
index 000000000..43cb26fdb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/spi.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Padmavathi Venna <padma.v@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_EXYNOS_COMMON_SPI_H_
+#define __ASM_ARCH_EXYNOS_COMMON_SPI_H_
+
+#ifndef __ASSEMBLY__
+
+/* SPI peripheral register map; padded to 64KB */
+struct exynos_spi {
+	unsigned int		ch_cfg;		/* 0x00 */
+	unsigned char		reserved0[4];
+	unsigned int		mode_cfg;	/* 0x08 */
+	unsigned int		cs_reg;		/* 0x0c */
+	unsigned char		reserved1[4];
+	unsigned int		spi_sts;	/* 0x14 */
+	unsigned int		tx_data;	/* 0x18 */
+	unsigned int		rx_data;	/* 0x1c */
+	unsigned int		pkt_cnt;	/* 0x20 */
+	unsigned char		reserved2[4];
+	unsigned int		swap_cfg;	/* 0x28 */
+	unsigned int		fb_clk;		/* 0x2c */
+	unsigned char		padding[0xffd0];
+};
+
+#define EXYNOS_SPI_MAX_FREQ	50000000
+
+#define SPI_TIMEOUT_MS		10
+#define SF_READ_DATA_CMD	0x3
+
+/* SPI_CHCFG */
+#define SPI_CH_HS_EN		(1 << 6)
+#define SPI_CH_RST		(1 << 5)
+#define SPI_SLAVE_MODE		(1 << 4)
+#define SPI_CH_CPOL_L		(1 << 3)
+#define SPI_CH_CPHA_B		(1 << 2)
+#define SPI_RX_CH_ON		(1 << 1)
+#define SPI_TX_CH_ON		(1 << 0)
+
+/* SPI_MODECFG */
+#define SPI_MODE_CH_WIDTH_WORD	(0x2 << 29)
+#define SPI_MODE_BUS_WIDTH_WORD	(0x2 << 17)
+
+/* SPI_CSREG */
+#define SPI_SLAVE_SIG_INACT	(1 << 0)
+
+/* SPI_STS */
+#define SPI_ST_TX_DONE		(1 << 25)
+#define SPI_FIFO_LVL_MASK	0x1ff
+#define SPI_TX_LVL_OFFSET	6
+#define SPI_RX_LVL_OFFSET	15
+
+/* Feedback Delay */
+#define SPI_CLK_BYPASS		(0 << 0)
+#define SPI_FB_DELAY_90		(1 << 0)
+#define SPI_FB_DELAY_180	(2 << 0)
+#define SPI_FB_DELAY_270	(3 << 0)
+
+/* Packet Count */
+#define SPI_PACKET_CNT_EN	(1 << 16)
+
+/* Swap config */
+#define SPI_TX_SWAP_EN		(1 << 0)
+#define SPI_TX_BYTE_SWAP	(1 << 2)
+#define SPI_TX_HWORD_SWAP	(1 << 3)
+#define SPI_TX_BYTE_SWAP	(1 << 2)
+#define SPI_RX_SWAP_EN		(1 << 4)
+#define SPI_RX_BYTE_SWAP	(1 << 6)
+#define SPI_RX_HWORD_SWAP	(1 << 7)
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/spl.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/spl.h
new file mode 100644
index 000000000..9d642461b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/spl.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ */
+
+#ifndef __ASM_ARCH_EXYNOS_SPL_H__
+#define __ASM_ARCH_EXYNOS_SPL_H__
+
+#include <asm/arch/dmc.h>
+#include <asm/arch/power.h>
+
+#ifndef __ASSEMBLY__
+/* Parameters of early board initialization in SPL */
+struct spl_machine_param {
+	/* Add fields as and when required */
+	u32		signature;
+	u32		version;	/* Version number */
+	u32		size;		/* Size of block */
+	/**
+	 * Parameters we expect, in order, terminated with \0. Each parameter
+	 * is a single character representing one 32-bit word in this
+	 * structure.
+	 *
+	 * Valid characters in this string are:
+	 *
+	 * Code		Name
+	 * v		mem_iv_size
+	 * m		mem_type
+	 * u		uboot_size
+	 * b		boot_source
+	 * f		frequency_mhz (memory frequency in MHz)
+	 * a		ARM clock frequency in MHz
+	 * s		serial base address
+	 * i		i2c base address for early access (meant for PMIC)
+	 * r		board rev GPIO numbers used to read board revision
+	 *			(lower halfword=bit 0, upper=bit 1)
+	 * M		Memory Manufacturer name
+	 * \0		termination
+	 */
+	char		params[12];	/* Length must be word-aligned */
+	u32		mem_iv_size;	/* Memory channel interleaving size */
+	enum ddr_mode	mem_type;	/* Type of on-board memory */
+	/*
+	 * U-Boot size - The iROM mmc copy function used by the SPL takes a
+	 * block count paramter to describe the U-Boot size unlike the spi
+	 * boot copy function which just uses the U-Boot size directly. Align
+	 * the U-Boot size to block size (512 bytes) when populating the SPL
+	 * table only for mmc boot.
+	 */
+	u32		uboot_size;
+	unsigned	boot_source;	/* Boot device */
+	unsigned	frequency_mhz;	/* Frequency of memory in MHz */
+	unsigned	arm_freq_mhz;	/* ARM Frequency in MHz */
+	u32		serial_base;	/* Serial base address */
+	u32		i2c_base;	/* i2c base address */
+	u32		board_rev_gpios;	/* Board revision GPIOs */
+	enum mem_manuf	mem_manuf;	/* Memory Manufacturer */
+} __attribute__((__packed__));
+#endif
+
+/**
+ * Validate signature and return a pointer to the parameter table.  If the
+ * signature is invalid, call panic() and never return.
+ *
+ * @return pointer to the parameter table if signature matched or never return.
+ */
+struct spl_machine_param *spl_get_machine_params(void);
+
+#endif /* __ASM_ARCH_EXYNOS_SPL_H__ */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/sromc.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/sromc.h
new file mode 100644
index 000000000..15c9ccc72
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/sromc.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * Note: This file contains the register description for SROMC
+ */
+
+#ifndef __ASM_ARCH_SROMC_H_
+#define __ASM_ARCH_SROMC_H_
+
+#define SROMC_DATA16_WIDTH(x)    (1<<((x*4)+0))
+#define SROMC_BYTE_ADDR_MODE(x)  (1<<((x*4)+1))  /* 0-> Half-word base address*/
+						/* 1-> Byte base address*/
+#define SROMC_WAIT_ENABLE(x)     (1<<((x*4)+2))
+#define SROMC_BYTE_ENABLE(x)     (1<<((x*4)+3))
+
+#define SROMC_BC_TACS(x) (x << 28) /* address set-up */
+#define SROMC_BC_TCOS(x) (x << 24) /* chip selection set-up */
+#define SROMC_BC_TACC(x) (x << 16) /* access cycle */
+#define SROMC_BC_TCOH(x) (x << 12) /* chip selection hold */
+#define SROMC_BC_TAH(x)  (x << 8)  /* address holding time */
+#define SROMC_BC_TACP(x) (x << 4)  /* page mode access cycle */
+#define SROMC_BC_PMC(x)  (x << 0)  /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s5p_sromc {
+	unsigned int	bw;
+	unsigned int	bc[4];
+};
+#endif	/* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
+
+enum {
+	FDT_SROM_PMC,
+	FDT_SROM_TACP,
+	FDT_SROM_TAH,
+	FDT_SROM_TCOH,
+	FDT_SROM_TACC,
+	FDT_SROM_TCOS,
+	FDT_SROM_TACS,
+
+	FDT_SROM_TIMING_COUNT,
+};
+
+struct fdt_sromc {
+	u8 bank;	/* srom bank number */
+	u8 width;	/* bus width in bytes */
+	unsigned int timing[FDT_SROM_TIMING_COUNT]; /* timing parameters */
+};
+
+#endif /* __ASM_ARCH_SROMC_H_ */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/sys_proto.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/sys_proto.h
new file mode 100644
index 000000000..53d53bc6b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/sys_proto.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010 Samsung Electrnoics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+u32 get_device_type(void);
+void invalidate_dcache(u32);
+void l2_cache_disable(void);
+void l2_cache_enable(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/system.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/system.h
new file mode 100644
index 000000000..48f13c764
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/system.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ * Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_SYSTEM_H_
+#define __ASM_ARM_ARCH_SYSTEM_H_
+
+#ifndef __ASSEMBLY__
+struct exynos4_sysreg {
+	unsigned char	res1[0x210];
+	unsigned int	display_ctrl;
+	unsigned int	display_ctrl2;
+	unsigned int	camera_control;
+	unsigned int	audio_endian;
+	unsigned int	jtag_con;
+};
+
+struct exynos5_sysreg {
+	unsigned char	res1[0x214];
+	unsigned int	disp1blk_cfg;
+	unsigned int	disp2blk_cfg;
+	unsigned int	hdcp_e_fuse;
+	unsigned int	gsclblk_cfg0;
+	unsigned int	gsclblk_cfg1;
+	unsigned int	reserved;
+	unsigned int	ispblk_cfg;
+	unsigned int	usb20phy_cfg;
+	unsigned char	res2[0x29c];
+	unsigned int	mipi_dphy;
+	unsigned int	dptx_dphy;
+	unsigned int	phyclk_sel;
+};
+#endif
+
+#define USB20_PHY_CFG_HOST_LINK_EN	(1 << 0)
+
+/*
+ * This instruction causes an event to be signaled to all cores
+ * within a multiprocessor system. If SEV is implemented,
+ * WFE must also be implemented.
+ */
+#define sev() __asm__ __volatile__ ("sev\n\t" : : );
+/*
+ * If the Event Register is not set, WFE suspends execution until
+ * one of the following events occurs:
+ * - an IRQ interrupt, unless masked by the CPSR I-bit
+ * - an FIQ interrupt, unless masked by the CPSR F-bit
+ * - an Imprecise Data abort, unless masked by the CPSR A-bit
+ * - a Debug Entry request, if Debug is enabled
+ * - an Event signaled by another processor using the SEV instruction.
+ * If the Event Register is set, WFE clears it and returns immediately.
+ * If WFE is implemented, SEV must also be implemented.
+ */
+#define wfe() __asm__ __volatile__ ("wfe\n\t" : : );
+
+/* Move 0xd3 value to CPSR register to enable SVC mode */
+#define svc32_mode_en() __asm__ __volatile__				\
+			("@ I&F disable, Mode: 0x13 - SVC\n\t"		\
+			 "msr     cpsr_c, %0\n\t" : : "r"(0x13|0xC0))
+
+/* Set program counter with the given value */
+#define set_pc(x) __asm__ __volatile__ ("mov     pc, %0\n\t" : : "r"(x))
+
+/* Branch to the given location */
+#define branch_bx(x) __asm__ __volatile__ ("bx	%0\n\t" : : "r"(x))
+
+/* Read Main Id register */
+#define mrc_midr(x) __asm__ __volatile__	\
+			("mrc     p15, 0, %0, c0, c0, 0\n\t" : "=r"(x) : )
+
+/* Read Multiprocessor Affinity Register */
+#define mrc_mpafr(x) __asm__ __volatile__	\
+			("mrc     p15, 0, %0, c0, c0, 5\n\t" : "=r"(x) : )
+
+/* Read System Control Register */
+#define mrc_sctlr(x) __asm__ __volatile__	\
+			("mrc     p15, 0, %0, c1, c0, 0\n\t" : "=r"(x) : )
+
+/* Read Auxiliary Control Register */
+#define mrc_auxr(x) __asm__ __volatile__	\
+			("mrc     p15, 0, %0, c1, c0, 1\n\t" : "=r"(x) : )
+
+/* Read L2 Control register */
+#define mrc_l2_ctlr(x) __asm__ __volatile__	\
+			("mrc     p15, 1, %0, c9, c0, 2\n\t" : "=r"(x) : )
+
+/* Read L2 Auxilliary Control register */
+#define mrc_l2_aux_ctlr(x) __asm__ __volatile__	\
+			("mrc     p15, 1, %0, c15, c0, 0\n\t" : "=r"(x) : )
+
+/* Write System Control Register */
+#define mcr_sctlr(x) __asm__ __volatile__	\
+			("mcr     p15, 0, %0, c1, c0, 0\n\t" : : "r"(x))
+
+/* Write Auxiliary Control Register */
+#define mcr_auxr(x) __asm__ __volatile__	\
+			("mcr     p15, 0, %0, c1, c0, 1\n\t" : : "r"(x))
+
+/* Invalidate all instruction caches to PoU */
+#define mcr_icache(x) __asm__ __volatile__	\
+			("mcr     p15, 0, %0, c7, c5, 0\n\t" : : "r"(x))
+
+/* Invalidate unified TLB */
+#define mcr_tlb(x) __asm__ __volatile__	\
+			("mcr     p15, 0, %0, c8, c7, 0\n\t" : : "r"(x))
+
+/* Write L2 Control register */
+#define mcr_l2_ctlr(x) __asm__ __volatile__	\
+			("mcr     p15, 1, %0, c9, c0, 2\n\t" : : "r"(x))
+
+/* Write L2 Auxilliary Control register */
+#define mcr_l2_aux_ctlr(x) __asm__ __volatile__	\
+			("mcr     p15, 1, %0, c15, c0, 0\n\t" : : "r"(x))
+
+void set_usbhost_mode(unsigned int mode);
+void set_system_display_ctrl(void);
+int exynos_lcd_early_init(const void *blob);
+
+#endif	/* _EXYNOS4_SYSTEM_H */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/tmu.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/tmu.h
new file mode 100644
index 000000000..cad35694f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/tmu.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *      http://www.samsung.com
+ * Akshay Saraswat <akshay.s@samsung.com>
+ *
+ * EXYNOS - Thermal Management Unit
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TMU_H
+#define __ASM_ARCH_TMU_H
+
+struct exynos5_tmu_reg {
+	u32 triminfo;
+	u32 rsvd1[4];
+	u32 triminfo_control;
+	u32 rsvd5[2];
+	u32 tmu_control;
+	u32 rsvd7;
+	u32 tmu_status;
+	u32 sampling_internal;
+	u32 counter_value0;
+	u32 counter_value1;
+	u32 rsvd8[2];
+	u32 current_temp;
+	u32 rsvd10[3];
+	u32 threshold_temp_rise;
+	u32 threshold_temp_fall;
+	u32 rsvd13[2];
+	u32 past_temp3_0;
+	u32 past_temp7_4;
+	u32 past_temp11_8;
+	u32 past_temp15_12;
+	u32 inten;
+	u32 intstat;
+	u32 intclear;
+	u32 rsvd15;
+	u32 emul_con;
+};
+#endif /* __ASM_ARCH_TMU_H */
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/tzpc.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/tzpc.h
new file mode 100644
index 000000000..66827ec8b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/tzpc.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ */
+
+#ifndef __TZPC_H_
+#define __TZPC_H_
+
+#ifndef __ASSEMBLY__
+struct exynos_tzpc {
+	unsigned int r0size;
+	char res1[0x7FC];
+	unsigned int decprot0stat;
+	unsigned int decprot0set;
+	unsigned int decprot0clr;
+	unsigned int decprot1stat;
+	unsigned int decprot1set;
+	unsigned int decprot1clr;
+	unsigned int decprot2stat;
+	unsigned int decprot2set;
+	unsigned int decprot2clr;
+	unsigned int decprot3stat;
+	unsigned int decprot3set;
+	unsigned int decprot3clr;
+	char res2[0x7B0];
+	unsigned int periphid0;
+	unsigned int periphid1;
+	unsigned int periphid2;
+	unsigned int periphid3;
+	unsigned int pcellid0;
+	unsigned int pcellid1;
+	unsigned int pcellid2;
+	unsigned int pcellid3;
+};
+
+#define EXYNOS4_NR_TZPC_BANKS		6
+#define EXYNOS5_NR_TZPC_BANKS		10
+
+/* TZPC : Register Offsets */
+#define TZPC_BASE_OFFSET		0x10000
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE			0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET		0xFF
+void tzpc_init(void);
+
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/uart.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/uart.h
new file mode 100644
index 000000000..d357188b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/uart.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_UART_H_
+#define __ASM_ARCH_UART_H_
+
+#ifndef __ASSEMBLY__
+/* baudrate rest value */
+union br_rest {
+	unsigned short	slot;		/* udivslot */
+	unsigned char	value;		/* ufracval */
+};
+
+struct s5p_uart {
+	unsigned int	ulcon;
+	unsigned int	ucon;
+	unsigned int	ufcon;
+	unsigned int	umcon;
+	unsigned int	utrstat;
+	unsigned int	uerstat;
+	unsigned int	ufstat;
+	unsigned int	umstat;
+	unsigned char	utxh;
+	unsigned char	res1[3];
+	unsigned char	urxh;
+	unsigned char	res2[3];
+	unsigned int	ubrdiv;
+	union br_rest	rest;
+	unsigned char	res3[0xffd0];
+};
+
+static inline int s5p_uart_divslot(void)
+{
+	return 0;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/watchdog.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/watchdog.h
new file mode 100644
index 000000000..903ac2544
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/watchdog.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_WATCHDOG_H_
+#define __ASM_ARM_ARCH_WATCHDOG_H_
+
+#define WTCON_RESET_OFFSET	0
+#define WTCON_INTEN_OFFSET	2
+#define WTCON_CLKSEL_OFFSET	3
+#define WTCON_EN_OFFSET		5
+#define WTCON_PRE_OFFSET	8
+
+#define WTCON_CLK_16		0x0
+#define WTCON_CLK_32		0x1
+#define WTCON_CLK_64		0x2
+#define WTCON_CLK_128		0x3
+
+#define WTCON_CLK(x)		((x & 0x3) << WTCON_CLKSEL_OFFSET)
+#define WTCON_PRESCALER(x)	((x) << WTCON_PRE_OFFSET)
+#define WTCON_EN		(0x1 << WTCON_EN_OFFSET)
+#define WTCON_RESET		(0x1 << WTCON_RESET_OFFSET)
+#define WTCON_INT		(0x1 << WTCON_INTEN_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct s5p_watchdog {
+	unsigned int wtcon;
+	unsigned int wtdat;
+	unsigned int wtcnt;
+	unsigned int wtclrint;
+};
+
+/* functions */
+void wdt_stop(void);
+void wdt_start(unsigned int timeout);
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/include/mach/xhci-exynos.h b/roms/u-boot/arch/arm/mach-exynos/include/mach/xhci-exynos.h
new file mode 100644
index 000000000..403b1e16b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/include/mach/xhci-exynos.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (c) 2012 Samsung Electronics Co. Ltd
+ *
+ * Exynos Phy register definitions
+ */
+
+#ifndef _ASM_ARCH_XHCI_EXYNOS_H_
+#define _ASM_ARCH_XHCI_EXYNOS_H_
+
+/* Phy register MACRO definitions */
+
+#define LINKSYSTEM_FLADJ_MASK			(0x3f << 1)
+#define LINKSYSTEM_FLADJ(_x)			((_x) << 1)
+#define LINKSYSTEM_XHCI_VERSION_CONTROL		(0x1 << 27)
+
+#define PHYUTMI_OTGDISABLE			(1 << 6)
+#define PHYUTMI_FORCESUSPEND			(1 << 1)
+#define PHYUTMI_FORCESLEEP			(1 << 0)
+
+#define PHYCLKRST_SSC_REFCLKSEL_MASK		(0xff << 23)
+#define PHYCLKRST_SSC_REFCLKSEL(_x)		((_x) << 23)
+
+#define PHYCLKRST_SSC_RANGE_MASK		(0x03 << 21)
+#define PHYCLKRST_SSC_RANGE(_x)			((_x) << 21)
+
+#define PHYCLKRST_SSC_EN			(0x1 << 20)
+#define PHYCLKRST_REF_SSP_EN			(0x1 << 19)
+#define PHYCLKRST_REF_CLKDIV2			(0x1 << 18)
+
+#define PHYCLKRST_MPLL_MULTIPLIER_MASK		(0x7f << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF	(0x19 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF	(0x02 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF	(0x68 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF	(0x7d << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF	(0x02 << 11)
+
+#define PHYCLKRST_FSEL_MASK			(0x3f << 5)
+#define PHYCLKRST_FSEL(_x)			((_x) << 5)
+#define PHYCLKRST_FSEL_PAD_100MHZ		(0x27 << 5)
+#define PHYCLKRST_FSEL_PAD_24MHZ		(0x2a << 5)
+#define PHYCLKRST_FSEL_PAD_20MHZ		(0x31 << 5)
+#define PHYCLKRST_FSEL_PAD_19_2MHZ		(0x38 << 5)
+
+#define PHYCLKRST_RETENABLEN			(0x1 << 4)
+
+#define PHYCLKRST_REFCLKSEL_MASK		(0x03 << 2)
+#define PHYCLKRST_REFCLKSEL_PAD_REFCLK		(0x2 << 2)
+#define PHYCLKRST_REFCLKSEL_EXT_REFCLK		(0x3 << 2)
+
+#define PHYCLKRST_PORTRESET			(0x1 << 1)
+#define PHYCLKRST_COMMONONN			(0x1 << 0)
+
+#define PHYPARAM0_REF_USE_PAD			(0x1 << 31)
+#define PHYPARAM0_REF_LOSLEVEL_MASK		(0x1f << 26)
+#define PHYPARAM0_REF_LOSLEVEL			(0x9 << 26)
+
+#define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x1f << 0)
+#define PHYPARAM1_PCS_TXDEEMPH			(0x1c)
+
+#define PHYTEST_POWERDOWN_SSP			(0x1 << 3)
+#define PHYTEST_POWERDOWN_HSP			(0x1 << 2)
+
+#define PHYBATCHG_UTMI_CLKSEL			(0x1 << 2)
+
+#define FSEL_CLKSEL_24M				(0x5)
+
+/* XHCI PHY register structure */
+struct exynos_usb3_phy {
+	unsigned int reserve1;
+	unsigned int link_system;
+	unsigned int phy_utmi;
+	unsigned int phy_pipe;
+	unsigned int phy_clk_rst;
+	unsigned int phy_reg0;
+	unsigned int phy_reg1;
+	unsigned int phy_param0;
+	unsigned int phy_param1;
+	unsigned int phy_term;
+	unsigned int phy_test;
+	unsigned int phy_adp;
+	unsigned int phy_batchg;
+	unsigned int phy_resume;
+	unsigned int reserve2[3];
+	unsigned int link_port;
+};
+
+#endif /* _ASM_ARCH_XHCI_EXYNOS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-exynos/lowlevel_init.c b/roms/u-boot/arch/arm/mach-exynos/lowlevel_init.c
new file mode 100644
index 000000000..97d6ca8fc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/lowlevel_init.c
@@ -0,0 +1,232 @@
+/*
+ * Lowlevel setup for EXYNOS5 based board
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <debug_uart.h>
+#include <asm/system.h>
+#include <init.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/power.h>
+#include <asm/arch/tzpc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/system.h>
+#include <asm/armv7.h>
+#include "common_setup.h"
+#include "exynos5_setup.h"
+
+/* These are the things we can do during low-level init */
+enum {
+	DO_WAKEUP	= 1 << 0,
+	DO_CLOCKS	= 1 << 1,
+	DO_MEM_RESET	= 1 << 2,
+	DO_UART		= 1 << 3,
+	DO_POWER	= 1 << 4,
+};
+
+#ifdef CONFIG_EXYNOS5420
+/*
+ * Power up secondary CPUs.
+ */
+static void secondary_cpu_start(void)
+{
+	v7_enable_smp(EXYNOS5420_INFORM_BASE);
+	svc32_mode_en();
+	branch_bx(CONFIG_EXYNOS_RELOCATE_CODE_BASE);
+}
+
+/*
+ * This is the entry point of hotplug-in and
+ * cluster switching.
+ */
+static void low_power_start(void)
+{
+	uint32_t val, reg_val;
+
+	reg_val = readl(EXYNOS5420_SPARE_BASE);
+	if (reg_val != CPU_RST_FLAG_VAL) {
+		writel(0x0, CONFIG_LOWPOWER_FLAG);
+		branch_bx(0x0);
+	}
+
+	reg_val = readl(CONFIG_PHY_IRAM_BASE + 0x4);
+	if (reg_val != (uint32_t)&low_power_start) {
+		/* Store jump address as low_power_start if not present */
+		writel((uint32_t)&low_power_start, CONFIG_PHY_IRAM_BASE + 0x4);
+		dsb();
+		sev();
+	}
+
+	/* Set the CPU to SVC32 mode */
+	svc32_mode_en();
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+	/* Read MIDR for Primary Part Number */
+	mrc_midr(val);
+	val = (val >> 4);
+	val &= 0xf;
+
+	if (val == 0xf) {
+		configure_l2_ctlr();
+		configure_l2_actlr();
+		v7_enable_l2_hazard_detect();
+	}
+#endif
+
+	/* Invalidate L1 & TLB */
+	val = 0x0;
+	mcr_tlb(val);
+	mcr_icache(val);
+
+	/* Disable MMU stuff and caches */
+	mrc_sctlr(val);
+
+	val &= ~((0x2 << 12) | 0x7);
+	val |= ((0x1 << 12) | (0x8 << 8) | 0x2);
+	mcr_sctlr(val);
+
+	/* CPU state is hotplug or reset */
+	secondary_cpu_start();
+
+	/* Core should not enter into WFI here */
+	wfi();
+}
+
+/*
+ * Pointer to this function is stored in iRam which is used
+ * for jump and power down of a specific core.
+ */
+static void power_down_core(void)
+{
+	uint32_t tmp, core_id, core_config;
+
+	/* Get the unique core id */
+	/*
+	 * Multiprocessor Affinity Register
+	 * [11:8]	Cluster ID
+	 * [1:0]	CPU ID
+	 */
+	mrc_mpafr(core_id);
+	tmp = core_id & 0x3;
+	core_id = (core_id >> 6) & ~3;
+	core_id |= tmp;
+	core_id &= 0x3f;
+
+	/* Set the status of the core to low */
+	core_config = (core_id * CPU_CONFIG_STATUS_OFFSET);
+	core_config += EXYNOS5420_CPU_CONFIG_BASE;
+	writel(0x0, core_config);
+
+	/* Core enter WFI */
+	wfi();
+}
+
+/*
+ * Configurations for secondary cores are inapt at this stage.
+ * Reconfigure secondary cores. Shutdown and change the status
+ * of all cores except the primary core.
+ */
+static void secondary_cores_configure(void)
+{
+	/* Clear secondary boot iRAM base */
+	writel(0x0, (CONFIG_EXYNOS_RELOCATE_CODE_BASE + 0x1C));
+
+	/* set lowpower flag and address */
+	writel(CPU_RST_FLAG_VAL, CONFIG_LOWPOWER_FLAG);
+	writel((uint32_t)&low_power_start, CONFIG_LOWPOWER_ADDR);
+	writel(CPU_RST_FLAG_VAL, EXYNOS5420_SPARE_BASE);
+	/* Store jump address for power down */
+	writel((uint32_t)&power_down_core, CONFIG_PHY_IRAM_BASE + 0x4);
+
+	/* Need all core power down check */
+	dsb();
+	sev();
+}
+
+extern void relocate_wait_code(void);
+#endif
+
+int do_lowlevel_init(void)
+{
+	uint32_t reset_status;
+	int actions = 0;
+
+	arch_cpu_init();
+
+#if !defined(CONFIG_SYS_L2CACHE_OFF) && defined(CONFIG_EXYNOS5420)
+	/*
+	 * Init L2 cache parameters here for use by boot and resume
+	 *
+	 * These are here instead of in v7_outer_cache_enable() so that the
+	 * L2 cache settings get properly set even at resume time or if we're
+	 * running U-Boot with the cache off.  The kernel still needs us to
+	 * set these for it.
+	 */
+	configure_l2_ctlr();
+	configure_l2_actlr();
+	dsb();
+	isb();
+
+	relocate_wait_code();
+
+	/* Reconfigure secondary cores */
+	secondary_cores_configure();
+#endif
+
+	reset_status = get_reset_status();
+
+	switch (reset_status) {
+	case S5P_CHECK_SLEEP:
+		actions = DO_CLOCKS | DO_WAKEUP;
+		break;
+	case S5P_CHECK_DIDLE:
+	case S5P_CHECK_LPA:
+		actions = DO_WAKEUP;
+		break;
+	default:
+		/* This is a normal boot (not a wake from sleep) */
+		actions = DO_CLOCKS | DO_MEM_RESET | DO_POWER;
+	}
+
+	if (actions & DO_POWER)
+		set_ps_hold_ctrl();
+
+	if (actions & DO_CLOCKS) {
+		system_clock_init();
+#ifdef CONFIG_DEBUG_UART
+#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL_SUPPORT)) || \
+    !defined(CONFIG_SPL_BUILD)
+		exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+		debug_uart_init();
+#endif
+#endif
+		mem_ctrl_init(actions & DO_MEM_RESET);
+		tzpc_init();
+	}
+
+	return actions & DO_WAKEUP;
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/mmu-arm64.c b/roms/u-boot/arch/arm/mach-exynos/mmu-arm64.c
new file mode 100644
index 000000000..46b8169d1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/mmu-arm64.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+#ifdef CONFIG_EXYNOS7420
+static struct mm_region exynos7420_mem_map[] = {
+	{
+		.virt	= 0x10000000UL,
+		.phys	= 0x10000000UL,
+		.size	= 0x10000000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+				PTE_BLOCK_NON_SHARE |
+				PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+	}, {
+		.virt	= 0x40000000UL,
+		.phys	= 0x40000000UL,
+		.size	= 0x80000000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+				PTE_BLOCK_INNER_SHARE,
+	}, {
+		/* List terminator */
+	},
+};
+
+struct mm_region *mem_map = exynos7420_mem_map;
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/pinmux.c b/roms/u-boot/arch/arm/mach-exynos/pinmux.c
new file mode 100644
index 000000000..ad3fbf2da
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/pinmux.c
@@ -0,0 +1,938 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2012 Samsung Electronics.
+ * Abhilash Kesavan <a.kesavan@samsung.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <log.h>
+#include <asm/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sromc.h>
+
+static void exynos5_uart_config(int peripheral)
+{
+	int i, start, count;
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		start = EXYNOS5_GPIO_A00;
+		count = 4;
+		break;
+	case PERIPH_ID_UART1:
+		start = EXYNOS5_GPIO_D00;
+		count = 4;
+		break;
+	case PERIPH_ID_UART2:
+		start = EXYNOS5_GPIO_A10;
+		count = 4;
+		break;
+	case PERIPH_ID_UART3:
+		start = EXYNOS5_GPIO_A14;
+		count = 2;
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
+	}
+	for (i = start; i < start + count; i++) {
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+	}
+}
+
+static void exynos5420_uart_config(int peripheral)
+{
+	int i, start, count;
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		start = EXYNOS5420_GPIO_A00;
+		count = 4;
+		break;
+	case PERIPH_ID_UART1:
+		start = EXYNOS5420_GPIO_A04;
+		count = 4;
+		break;
+	case PERIPH_ID_UART2:
+		start = EXYNOS5420_GPIO_A10;
+		count = 4;
+		break;
+	case PERIPH_ID_UART3:
+		start = EXYNOS5420_GPIO_A14;
+		count = 2;
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
+	}
+
+	for (i = start; i < start + count; i++) {
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+	}
+}
+
+static int exynos5_mmc_config(int peripheral, int flags)
+{
+	int i, start, start_ext, gpio_func = 0;
+
+	switch (peripheral) {
+	case PERIPH_ID_SDMMC0:
+		start = EXYNOS5_GPIO_C00;
+		start_ext = EXYNOS5_GPIO_C10;
+		gpio_func = S5P_GPIO_FUNC(0x2);
+		break;
+	case PERIPH_ID_SDMMC1:
+		start = EXYNOS5_GPIO_C20;
+		start_ext = 0;
+		break;
+	case PERIPH_ID_SDMMC2:
+		start = EXYNOS5_GPIO_C30;
+		start_ext = EXYNOS5_GPIO_C43;
+		gpio_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC3:
+		start = EXYNOS5_GPIO_C40;
+		start_ext = 0;
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+	if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) {
+		debug("SDMMC device %d does not support 8bit mode",
+				peripheral);
+		return -1;
+	}
+	if (flags & PINMUX_FLAG_8BIT_MODE) {
+		for (i = start_ext; i <= (start_ext + 3); i++) {
+			gpio_cfg_pin(i, gpio_func);
+			gpio_set_pull(i, S5P_GPIO_PULL_UP);
+			gpio_set_drv(i, S5P_GPIO_DRV_4X);
+		}
+	}
+	for (i = start; i < (start + 2); i++) {
+		gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		gpio_set_drv(i, S5P_GPIO_DRV_4X);
+	}
+	for (i = (start + 3); i <= (start + 6); i++) {
+		gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+		gpio_set_pull(i, S5P_GPIO_PULL_UP);
+		gpio_set_drv(i, S5P_GPIO_DRV_4X);
+	}
+
+	return 0;
+}
+
+static int exynos5420_mmc_config(int peripheral, int flags)
+{
+	int i, start = 0, start_ext = 0;
+
+	switch (peripheral) {
+	case PERIPH_ID_SDMMC0:
+		start = EXYNOS5420_GPIO_C00;
+		start_ext = EXYNOS5420_GPIO_C30;
+		break;
+	case PERIPH_ID_SDMMC1:
+		start = EXYNOS5420_GPIO_C10;
+		start_ext = EXYNOS5420_GPIO_D14;
+		break;
+	case PERIPH_ID_SDMMC2:
+		start = EXYNOS5420_GPIO_C20;
+		start_ext = 0;
+		break;
+	default:
+		start = 0;
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) {
+		debug("SDMMC device %d does not support 8bit mode",
+		      peripheral);
+		return -1;
+	}
+
+	if (flags & PINMUX_FLAG_8BIT_MODE) {
+		for (i = start_ext; i <= (start_ext + 3); i++) {
+			gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+			gpio_set_pull(i, S5P_GPIO_PULL_UP);
+			gpio_set_drv(i, S5P_GPIO_DRV_4X);
+		}
+	}
+
+	for (i = start; i < (start + 3); i++) {
+		/*
+		 * MMC0 is intended to be used for eMMC. The
+		 * card detect pin is used as a VDDEN signal to
+		 * power on the eMMC. The 5420 iROM makes
+		 * this same assumption.
+		 */
+		if ((peripheral == PERIPH_ID_SDMMC0) && (i == (start + 2))) {
+#ifndef CONFIG_SPL_BUILD
+			gpio_request(i, "sdmmc0_vdden");
+#endif
+			gpio_set_value(i, 1);
+			gpio_cfg_pin(i, S5P_GPIO_OUTPUT);
+		} else {
+			gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+		}
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		gpio_set_drv(i, S5P_GPIO_DRV_4X);
+	}
+
+	for (i = (start + 3); i <= (start + 6); i++) {
+		gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+		gpio_set_pull(i, S5P_GPIO_PULL_UP);
+		gpio_set_drv(i, S5P_GPIO_DRV_4X);
+	}
+
+	return 0;
+}
+
+static void exynos5_sromc_config(int flags)
+{
+	int i;
+
+	/*
+	 * SROM:CS1 and EBI
+	 *
+	 * GPY0[0]	SROM_CSn[0]
+	 * GPY0[1]	SROM_CSn[1](2)
+	 * GPY0[2]	SROM_CSn[2]
+	 * GPY0[3]	SROM_CSn[3]
+	 * GPY0[4]	EBI_OEn(2)
+	 * GPY0[5]	EBI_EEn(2)
+	 *
+	 * GPY1[0]	EBI_BEn[0](2)
+	 * GPY1[1]	EBI_BEn[1](2)
+	 * GPY1[2]	SROM_WAIT(2)
+	 * GPY1[3]	EBI_DATA_RDn(2)
+	 */
+	gpio_cfg_pin(EXYNOS5_GPIO_Y00 + (flags & PINMUX_FLAG_BANK),
+		     S5P_GPIO_FUNC(2));
+	gpio_cfg_pin(EXYNOS5_GPIO_Y04, S5P_GPIO_FUNC(2));
+	gpio_cfg_pin(EXYNOS5_GPIO_Y05, S5P_GPIO_FUNC(2));
+
+	for (i = 0; i < 4; i++)
+		gpio_cfg_pin(EXYNOS5_GPIO_Y10 + i, S5P_GPIO_FUNC(2));
+
+	/*
+	 * EBI: 8 Addrss Lines
+	 *
+	 * GPY3[0]	EBI_ADDR[0](2)
+	 * GPY3[1]	EBI_ADDR[1](2)
+	 * GPY3[2]	EBI_ADDR[2](2)
+	 * GPY3[3]	EBI_ADDR[3](2)
+	 * GPY3[4]	EBI_ADDR[4](2)
+	 * GPY3[5]	EBI_ADDR[5](2)
+	 * GPY3[6]	EBI_ADDR[6](2)
+	 * GPY3[7]	EBI_ADDR[7](2)
+	 *
+	 * EBI: 16 Data Lines
+	 *
+	 * GPY5[0]	EBI_DATA[0](2)
+	 * GPY5[1]	EBI_DATA[1](2)
+	 * GPY5[2]	EBI_DATA[2](2)
+	 * GPY5[3]	EBI_DATA[3](2)
+	 * GPY5[4]	EBI_DATA[4](2)
+	 * GPY5[5]	EBI_DATA[5](2)
+	 * GPY5[6]	EBI_DATA[6](2)
+	 * GPY5[7]	EBI_DATA[7](2)
+	 *
+	 * GPY6[0]	EBI_DATA[8](2)
+	 * GPY6[1]	EBI_DATA[9](2)
+	 * GPY6[2]	EBI_DATA[10](2)
+	 * GPY6[3]	EBI_DATA[11](2)
+	 * GPY6[4]	EBI_DATA[12](2)
+	 * GPY6[5]	EBI_DATA[13](2)
+	 * GPY6[6]	EBI_DATA[14](2)
+	 * GPY6[7]	EBI_DATA[15](2)
+	 */
+	for (i = 0; i < 8; i++) {
+		gpio_cfg_pin(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_FUNC(2));
+		gpio_set_pull(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_PULL_UP);
+
+		gpio_cfg_pin(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_FUNC(2));
+		gpio_set_pull(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_PULL_UP);
+
+		gpio_cfg_pin(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_FUNC(2));
+		gpio_set_pull(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_PULL_UP);
+	}
+}
+
+static void exynos5_i2c_config(int peripheral, int flags)
+{
+	int func01, func23;
+
+	 /* High-Speed I2C */
+	if (flags & PINMUX_FLAG_HS_MODE) {
+		func01 = 4;
+		func23 = 4;
+	} else {
+		func01 = 2;
+		func23 = 3;
+	}
+
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+		gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(func01));
+		gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(func01));
+		break;
+	case PERIPH_ID_I2C1:
+		gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(func01));
+		gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(func01));
+		break;
+	case PERIPH_ID_I2C2:
+		gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(func23));
+		gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(func23));
+		break;
+	case PERIPH_ID_I2C3:
+		gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(func23));
+		gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(func23));
+		break;
+	case PERIPH_ID_I2C4:
+		gpio_cfg_pin(EXYNOS5_GPIO_A20, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A21, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		gpio_cfg_pin(EXYNOS5_GPIO_A22, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A23, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		gpio_cfg_pin(EXYNOS5_GPIO_B13, S5P_GPIO_FUNC(0x4));
+		gpio_cfg_pin(EXYNOS5_GPIO_B14, S5P_GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		gpio_cfg_pin(EXYNOS5_GPIO_B22, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_B23, S5P_GPIO_FUNC(0x3));
+		break;
+	}
+}
+
+static void exynos5420_i2c_config(int peripheral)
+{
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+		gpio_cfg_pin(EXYNOS5420_GPIO_B30, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5420_GPIO_B31, S5P_GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C1:
+		gpio_cfg_pin(EXYNOS5420_GPIO_B32, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5420_GPIO_B33, S5P_GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C2:
+		gpio_cfg_pin(EXYNOS5420_GPIO_A06, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5420_GPIO_A07, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C3:
+		gpio_cfg_pin(EXYNOS5420_GPIO_A12, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5420_GPIO_A13, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C4:
+		gpio_cfg_pin(EXYNOS5420_GPIO_A20, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5420_GPIO_A21, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		gpio_cfg_pin(EXYNOS5420_GPIO_A22, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5420_GPIO_A23, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		gpio_cfg_pin(EXYNOS5420_GPIO_B13, S5P_GPIO_FUNC(0x4));
+		gpio_cfg_pin(EXYNOS5420_GPIO_B14, S5P_GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		gpio_cfg_pin(EXYNOS5420_GPIO_B22, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5420_GPIO_B23, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C8:
+		gpio_cfg_pin(EXYNOS5420_GPIO_B34, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5420_GPIO_B35, S5P_GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C9:
+		gpio_cfg_pin(EXYNOS5420_GPIO_B36, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5420_GPIO_B37, S5P_GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C10:
+		gpio_cfg_pin(EXYNOS5420_GPIO_B40, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5420_GPIO_B41, S5P_GPIO_FUNC(0x2));
+		break;
+	}
+}
+
+static void exynos5_i2s_config(int peripheral)
+{
+	int i;
+
+	switch (peripheral) {
+	case PERIPH_ID_I2S0:
+		for (i = 0; i < 5; i++)
+			gpio_cfg_pin(EXYNOS5_GPIO_Z0 + i, S5P_GPIO_FUNC(0x02));
+		break;
+	case PERIPH_ID_I2S1:
+		for (i = 0; i < 5; i++)
+			gpio_cfg_pin(EXYNOS5_GPIO_B00 + i, S5P_GPIO_FUNC(0x02));
+		break;
+	}
+}
+
+static void exynos5420_i2s_config(int peripheral)
+{
+	int i;
+
+	switch (peripheral) {
+	case PERIPH_ID_I2S0:
+		for (i = 0; i < 5; i++)
+			gpio_cfg_pin(EXYNOS5420_GPIO_Z0 + i,
+				     S5P_GPIO_FUNC(0x02));
+		break;
+	}
+}
+
+
+void exynos5_spi_config(int peripheral)
+{
+	int cfg = 0, pin = 0, i;
+
+	switch (peripheral) {
+	case PERIPH_ID_SPI0:
+		cfg = S5P_GPIO_FUNC(0x2);
+		pin = EXYNOS5_GPIO_A20;
+		break;
+	case PERIPH_ID_SPI1:
+		cfg = S5P_GPIO_FUNC(0x2);
+		pin = EXYNOS5_GPIO_A24;
+		break;
+	case PERIPH_ID_SPI2:
+		cfg = S5P_GPIO_FUNC(0x5);
+		pin = EXYNOS5_GPIO_B11;
+		break;
+	case PERIPH_ID_SPI3:
+		cfg = S5P_GPIO_FUNC(0x2);
+		pin = EXYNOS5_GPIO_F10;
+		break;
+	case PERIPH_ID_SPI4:
+		for (i = 0; i < 2; i++) {
+			gpio_cfg_pin(EXYNOS5_GPIO_F02 + i, S5P_GPIO_FUNC(0x4));
+			gpio_cfg_pin(EXYNOS5_GPIO_E04 + i, S5P_GPIO_FUNC(0x4));
+		}
+		break;
+	}
+	if (peripheral != PERIPH_ID_SPI4) {
+		for (i = pin; i < pin + 4; i++)
+			gpio_cfg_pin(i, cfg);
+	}
+}
+
+void exynos5420_spi_config(int peripheral)
+{
+	int cfg, pin, i;
+
+	switch (peripheral) {
+	case PERIPH_ID_SPI0:
+		pin = EXYNOS5420_GPIO_A20;
+		cfg = S5P_GPIO_FUNC(0x2);
+		break;
+	case PERIPH_ID_SPI1:
+		pin = EXYNOS5420_GPIO_A24;
+		cfg = S5P_GPIO_FUNC(0x2);
+		break;
+	case PERIPH_ID_SPI2:
+		pin = EXYNOS5420_GPIO_B11;
+		cfg = S5P_GPIO_FUNC(0x5);
+		break;
+	case PERIPH_ID_SPI3:
+		pin = EXYNOS5420_GPIO_F10;
+		cfg = S5P_GPIO_FUNC(0x2);
+		break;
+	case PERIPH_ID_SPI4:
+		cfg = 0;
+		pin = 0;
+		break;
+	default:
+		cfg = 0;
+		pin = 0;
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
+	}
+
+	if (peripheral != PERIPH_ID_SPI4) {
+		for (i = pin; i < pin + 4; i++)
+			gpio_cfg_pin(i, cfg);
+	} else {
+		for (i = 0; i < 2; i++) {
+			gpio_cfg_pin(EXYNOS5420_GPIO_F02 + i,
+				     S5P_GPIO_FUNC(0x4));
+			gpio_cfg_pin(EXYNOS5420_GPIO_E04 + i,
+				     S5P_GPIO_FUNC(0x4));
+		}
+	}
+}
+
+static int exynos5_pinmux_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		exynos5_uart_config(peripheral);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC3:
+		return exynos5_mmc_config(peripheral, flags);
+	case PERIPH_ID_SROMC:
+		exynos5_sromc_config(flags);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+		exynos5_i2c_config(peripheral, flags);
+		break;
+	case PERIPH_ID_I2S0:
+	case PERIPH_ID_I2S1:
+		exynos5_i2s_config(peripheral);
+		break;
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+	case PERIPH_ID_SPI2:
+	case PERIPH_ID_SPI3:
+	case PERIPH_ID_SPI4:
+		exynos5_spi_config(peripheral);
+		break;
+	case PERIPH_ID_DPHPD:
+		/* Set Hotplug detect for DP */
+		gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
+
+		/*
+		 * Hotplug detect should have an external pullup; disable the
+		 * internal pulldown so they don't fight.
+		 */
+		gpio_set_pull(EXYNOS5_GPIO_X07, S5P_GPIO_PULL_NONE);
+		break;
+	case PERIPH_ID_PWM0:
+		gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_FUNC(2));
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int exynos5420_pinmux_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		exynos5420_uart_config(peripheral);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC3:
+		return exynos5420_mmc_config(peripheral, flags);
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+	case PERIPH_ID_SPI2:
+	case PERIPH_ID_SPI3:
+	case PERIPH_ID_SPI4:
+		exynos5420_spi_config(peripheral);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+	case PERIPH_ID_I2C8:
+	case PERIPH_ID_I2C9:
+	case PERIPH_ID_I2C10:
+		exynos5420_i2c_config(peripheral);
+		break;
+	case PERIPH_ID_I2S0:
+		exynos5420_i2s_config(peripheral);
+		break;
+	case PERIPH_ID_PWM0:
+		gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_FUNC(2));
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
+static void exynos4_i2c_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+		gpio_cfg_pin(EXYNOS4_GPIO_D10, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS4_GPIO_D11, S5P_GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C1:
+		gpio_cfg_pin(EXYNOS4_GPIO_D12, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS4_GPIO_D13, S5P_GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C2:
+		gpio_cfg_pin(EXYNOS4_GPIO_A06, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4_GPIO_A07, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C3:
+		gpio_cfg_pin(EXYNOS4_GPIO_A12, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4_GPIO_A13, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C4:
+		gpio_cfg_pin(EXYNOS4_GPIO_B2, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4_GPIO_B3, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		gpio_cfg_pin(EXYNOS4_GPIO_B6, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4_GPIO_B7, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		gpio_cfg_pin(EXYNOS4_GPIO_C13, S5P_GPIO_FUNC(0x4));
+		gpio_cfg_pin(EXYNOS4_GPIO_C14, S5P_GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		gpio_cfg_pin(EXYNOS4_GPIO_D02, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4_GPIO_D03, S5P_GPIO_FUNC(0x3));
+		break;
+	}
+}
+
+static int exynos4_mmc_config(int peripheral, int flags)
+{
+	int i, start = 0, start_ext = 0;
+	unsigned int func, ext_func;
+
+	switch (peripheral) {
+	case PERIPH_ID_SDMMC0:
+		start = EXYNOS4_GPIO_K00;
+		start_ext = EXYNOS4_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC2:
+		start = EXYNOS4_GPIO_K20;
+		start_ext = EXYNOS4_GPIO_K33;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC4:
+		start = EXYNOS4_GPIO_K00;
+		start_ext = EXYNOS4_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x3);
+		ext_func = S5P_GPIO_FUNC(0x4);
+		break;
+	default:
+		return -1;
+	}
+	for (i = start; i < (start + 7); i++) {
+		if (i == (start + 2))
+			continue;
+		gpio_cfg_pin(i,  func);
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		gpio_set_drv(i, S5P_GPIO_DRV_4X);
+	}
+	/* SDMMC2 do not use 8bit mode at exynos4 */
+	if (flags & PINMUX_FLAG_8BIT_MODE) {
+		for (i = start_ext; i < (start_ext + 4); i++) {
+			gpio_cfg_pin(i,  ext_func);
+			gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+			gpio_set_drv(i, S5P_GPIO_DRV_4X);
+		}
+	}
+
+	return 0;
+}
+
+static void exynos4_uart_config(int peripheral)
+{
+	int i, start, count;
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		start = EXYNOS4_GPIO_A00;
+		count = 4;
+		break;
+	case PERIPH_ID_UART1:
+		start = EXYNOS4_GPIO_A04;
+		count = 4;
+		break;
+	case PERIPH_ID_UART2:
+		start = EXYNOS4_GPIO_A10;
+		count = 4;
+		break;
+	case PERIPH_ID_UART3:
+		start = EXYNOS4_GPIO_A14;
+		count = 2;
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
+	}
+	for (i = start; i < (start + count); i++) {
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+	}
+}
+
+static void exynos4x12_i2c_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+		gpio_cfg_pin(EXYNOS4X12_GPIO_D10, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS4X12_GPIO_D11, S5P_GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C1:
+		gpio_cfg_pin(EXYNOS4X12_GPIO_D12, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS4X12_GPIO_D13, S5P_GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C2:
+		gpio_cfg_pin(EXYNOS4X12_GPIO_A06, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4X12_GPIO_A07, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C3:
+		gpio_cfg_pin(EXYNOS4X12_GPIO_A12, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4X12_GPIO_A13, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C4:
+		gpio_cfg_pin(EXYNOS4X12_GPIO_B2, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4X12_GPIO_B3, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		gpio_cfg_pin(EXYNOS4X12_GPIO_B6, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4X12_GPIO_B7, S5P_GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		gpio_cfg_pin(EXYNOS4X12_GPIO_C13, S5P_GPIO_FUNC(0x4));
+		gpio_cfg_pin(EXYNOS4X12_GPIO_C14, S5P_GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		gpio_cfg_pin(EXYNOS4X12_GPIO_D02, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS4X12_GPIO_D03, S5P_GPIO_FUNC(0x3));
+		break;
+	}
+}
+
+static int exynos4x12_mmc_config(int peripheral, int flags)
+{
+	int i, start = 0, start_ext = 0;
+	unsigned int func, ext_func;
+
+	switch (peripheral) {
+	case PERIPH_ID_SDMMC0:
+		start = EXYNOS4X12_GPIO_K00;
+		start_ext = EXYNOS4X12_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC2:
+		start = EXYNOS4X12_GPIO_K20;
+		start_ext = EXYNOS4X12_GPIO_K33;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC4:
+		start = EXYNOS4X12_GPIO_K00;
+		start_ext = EXYNOS4X12_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x3);
+		ext_func = S5P_GPIO_FUNC(0x4);
+		break;
+	default:
+		return -1;
+	}
+	for (i = start; i < (start + 7); i++) {
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		if (i == (start + 2))
+			continue;
+		gpio_cfg_pin(i,  func);
+		gpio_set_drv(i, S5P_GPIO_DRV_4X);
+	}
+	if (flags & PINMUX_FLAG_8BIT_MODE) {
+		for (i = start_ext; i < (start_ext + 4); i++) {
+			gpio_cfg_pin(i,  ext_func);
+			gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+			gpio_set_drv(i, S5P_GPIO_DRV_4X);
+		}
+	}
+
+	return 0;
+}
+
+static void exynos4x12_uart_config(int peripheral)
+{
+	int i, start, count;
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		start = EXYNOS4X12_GPIO_A00;
+		count = 4;
+		break;
+	case PERIPH_ID_UART1:
+		start = EXYNOS4X12_GPIO_A04;
+		count = 4;
+		break;
+	case PERIPH_ID_UART2:
+		start = EXYNOS4X12_GPIO_A10;
+		count = 4;
+		break;
+	case PERIPH_ID_UART3:
+		start = EXYNOS4X12_GPIO_A14;
+		count = 2;
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
+	}
+	for (i = start; i < (start + count); i++) {
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+	}
+}
+
+static int exynos4_pinmux_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		exynos4_uart_config(peripheral);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+		exynos4_i2c_config(peripheral, flags);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC4:
+		return exynos4_mmc_config(peripheral, flags);
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC3:
+		debug("SDMMC device %d not implemented\n", peripheral);
+		return -1;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int exynos4x12_pinmux_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		exynos4x12_uart_config(peripheral);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+		exynos4x12_i2c_config(peripheral, flags);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC4:
+		return exynos4x12_mmc_config(peripheral, flags);
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC3:
+		debug("SDMMC device %d not implemented\n", peripheral);
+		return -1;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
+int exynos_pinmux_config(int peripheral, int flags)
+{
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			return exynos5420_pinmux_config(peripheral, flags);
+		else if (proid_is_exynos5250())
+			return exynos5_pinmux_config(peripheral, flags);
+	} else if (cpu_is_exynos4()) {
+		if (proid_is_exynos4412())
+			return exynos4x12_pinmux_config(peripheral, flags);
+		else
+			return exynos4_pinmux_config(peripheral, flags);
+	}
+
+	debug("pinmux functionality not supported\n");
+
+	return -1;
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static int exynos4_pinmux_decode_periph_id(const void *blob, int node)
+{
+	int err;
+	u32 cell[3];
+
+	err = fdtdec_get_int_array(blob, node, "interrupts", cell,
+					ARRAY_SIZE(cell));
+	if (err) {
+		debug(" invalid peripheral id\n");
+		return PERIPH_ID_NONE;
+	}
+
+	return cell[1];
+}
+
+static int exynos5_pinmux_decode_periph_id(const void *blob, int node)
+{
+	int err;
+	u32 cell[3];
+
+	err = fdtdec_get_int_array(blob, node, "interrupts", cell,
+					ARRAY_SIZE(cell));
+	if (err)
+		return PERIPH_ID_NONE;
+
+	return cell[1];
+}
+
+int pinmux_decode_periph_id(const void *blob, int node)
+{
+	if (cpu_is_exynos5())
+		return  exynos5_pinmux_decode_periph_id(blob, node);
+	else if (cpu_is_exynos4())
+		return  exynos4_pinmux_decode_periph_id(blob, node);
+
+	return PERIPH_ID_NONE;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/power.c b/roms/u-boot/arch/arm/mach-exynos/power.c
new file mode 100644
index 000000000..f2a6c00dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/power.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/power.h>
+
+static void exynos4_mipi_phy_control(unsigned int dev_index,
+					unsigned int enable)
+{
+	struct exynos4_power *pmu =
+	    (struct exynos4_power *)samsung_get_base_power();
+	unsigned int addr, cfg = 0;
+
+	if (dev_index == 0)
+		addr = (unsigned int)&pmu->mipi_phy0_control;
+	else
+		addr = (unsigned int)&pmu->mipi_phy1_control;
+
+
+	cfg = readl(addr);
+	if (enable)
+		cfg |= (EXYNOS_MIPI_PHY_MRESETN | EXYNOS_MIPI_PHY_ENABLE);
+	else
+		cfg &= ~(EXYNOS_MIPI_PHY_MRESETN | EXYNOS_MIPI_PHY_ENABLE);
+
+	writel(cfg, addr);
+}
+
+void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable)
+{
+	if (cpu_is_exynos4())
+		exynos4_mipi_phy_control(dev_index, enable);
+}
+
+void exynos5_set_usbhost_phy_ctrl(unsigned int enable)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	if (enable) {
+		/* Enabling USBHOST_PHY */
+		setbits_le32(&power->usbhost_phy_control,
+				POWER_USB_HOST_PHY_CTRL_EN);
+	} else {
+		/* Disabling USBHOST_PHY */
+		clrbits_le32(&power->usbhost_phy_control,
+				POWER_USB_HOST_PHY_CTRL_EN);
+	}
+}
+
+void exynos4412_set_usbhost_phy_ctrl(unsigned int enable)
+{
+	struct exynos4412_power *power =
+		(struct exynos4412_power *)samsung_get_base_power();
+
+	if (enable) {
+		/* Enabling USBHOST_PHY */
+		setbits_le32(&power->usbhost_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+		setbits_le32(&power->hsic1_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+		setbits_le32(&power->hsic2_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+	} else {
+		/* Disabling USBHOST_PHY */
+		clrbits_le32(&power->usbhost_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+		clrbits_le32(&power->hsic1_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+		clrbits_le32(&power->hsic2_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+	}
+}
+
+void set_usbhost_phy_ctrl(unsigned int enable)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_usbhost_phy_ctrl(enable);
+	else if (cpu_is_exynos4())
+		if (proid_is_exynos4412())
+			exynos4412_set_usbhost_phy_ctrl(enable);
+}
+
+static void exynos5_set_usbdrd_phy_ctrl(unsigned int enable)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	if (enable) {
+		/* Enabling USBDRD_PHY */
+		setbits_le32(&power->usbdrd_phy_control,
+				POWER_USB_DRD_PHY_CTRL_EN);
+	} else {
+		/* Disabling USBDRD_PHY */
+		clrbits_le32(&power->usbdrd_phy_control,
+				POWER_USB_DRD_PHY_CTRL_EN);
+	}
+}
+
+static void exynos5420_set_usbdev_phy_ctrl(unsigned int enable)
+{
+	struct exynos5420_power *power =
+		(struct exynos5420_power *)samsung_get_base_power();
+
+	if (enable) {
+		/* Enabling USBDEV_PHY */
+		setbits_le32(&power->usbdev_phy_control,
+				POWER_USB_DRD_PHY_CTRL_EN);
+		setbits_le32(&power->usbdev1_phy_control,
+				POWER_USB_DRD_PHY_CTRL_EN);
+	} else {
+		/* Disabling USBDEV_PHY */
+		clrbits_le32(&power->usbdev_phy_control,
+				POWER_USB_DRD_PHY_CTRL_EN);
+		clrbits_le32(&power->usbdev1_phy_control,
+				POWER_USB_DRD_PHY_CTRL_EN);
+	}
+}
+
+void set_usbdrd_phy_ctrl(unsigned int enable)
+{
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos542x())
+			exynos5420_set_usbdev_phy_ctrl(enable);
+		else
+			exynos5_set_usbdrd_phy_ctrl(enable);
+	}
+}
+
+static void exynos5_dp_phy_control(unsigned int enable)
+{
+	unsigned int cfg;
+	struct exynos5_power *power =
+	    (struct exynos5_power *)samsung_get_base_power();
+
+	cfg = readl(&power->dptx_phy_control);
+	if (enable)
+		cfg |= EXYNOS_DP_PHY_ENABLE;
+	else
+		cfg &= ~EXYNOS_DP_PHY_ENABLE;
+
+	writel(cfg, &power->dptx_phy_control);
+}
+
+void exynos_dp_phy_ctrl(unsigned int enable)
+{
+	if (cpu_is_exynos5())
+		exynos5_dp_phy_control(enable);
+}
+
+static void exynos5_set_ps_hold_ctrl(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	/* Set PS-Hold high */
+	setbits_le32(&power->ps_hold_control,
+			EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
+}
+
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
+void set_ps_hold_ctrl(void)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_ps_hold_ctrl();
+}
+
+
+static void exynos5_set_xclkout(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	/* use xxti for xclk out */
+	clrsetbits_le32(&power->pmu_debug, PMU_DEBUG_CLKOUT_SEL_MASK,
+				PMU_DEBUG_XXTI);
+}
+
+void set_xclkout(void)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_xclkout();
+}
+
+/* Enables hardware tripping to power off the system when TMU fails */
+void set_hw_thermal_trip(void)
+{
+	if (cpu_is_exynos5()) {
+		struct exynos5_power *power =
+			(struct exynos5_power *)samsung_get_base_power();
+
+		/* PS_HOLD_CONTROL register ENABLE_HW_TRIP bit*/
+		setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP);
+	}
+}
+
+static uint32_t exynos5_get_reset_status(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	return power->inform1;
+}
+
+static uint32_t exynos4_get_reset_status(void)
+{
+	struct exynos4_power *power =
+		(struct exynos4_power *)samsung_get_base_power();
+
+	return power->inform1;
+}
+
+uint32_t get_reset_status(void)
+{
+	if (cpu_is_exynos5())
+		return exynos5_get_reset_status();
+	else
+		return  exynos4_get_reset_status();
+}
+
+static void exynos5_power_exit_wakeup(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+	typedef void (*resume_func)(void);
+
+	((resume_func)power->inform0)();
+}
+
+static void exynos4_power_exit_wakeup(void)
+{
+	struct exynos4_power *power =
+		(struct exynos4_power *)samsung_get_base_power();
+	typedef void (*resume_func)(void);
+
+	((resume_func)power->inform0)();
+}
+
+void power_exit_wakeup(void)
+{
+	if (cpu_is_exynos5())
+		exynos5_power_exit_wakeup();
+	else
+		exynos4_power_exit_wakeup();
+}
+
+unsigned int get_boot_mode(void)
+{
+	unsigned int om_pin = samsung_get_base_power();
+
+	return readl(om_pin) & OM_PIN_MASK;
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/sec_boot.S b/roms/u-boot/arch/arm/mach-exynos/sec_boot.S
new file mode 100644
index 000000000..59d05e6c0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/sec_boot.S
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ * Akshay Saraswat <akshay.s@samsung.com>
+ */
+
+#include <config.h>
+#include <asm/arch/cpu.h>
+
+	.globl relocate_wait_code
+relocate_wait_code:
+	adr     r0, code_base		@ r0: source address (start)
+	adr     r1, code_end		@ r1: source address (end)
+	ldr     r2, =0x02073000		@ r2: target address
+1:
+	ldmia   r0!, {r3-r6}
+	stmia   r2!, {r3-r6}
+	cmp     r0, r1
+	blt     1b
+	b	code_end
+	.ltorg
+/*
+ * Secondary core waits here until Primary wake it up.
+ * Below code is copied to CONFIG_EXYNOS_RELOCATE_CODE_BASE.
+ * This is a workaround code which is supposed to act as a
+ * substitute/supplement to the iROM code.
+ *
+ * This workaround code is relocated to the address 0x02073000
+ * because that comes out to be the last 4KB of the iRAM
+ * (Base Address - 0x02020000, Limit Address - 0x020740000).
+ *
+ * U-Boot and kernel are aware of this code and flags by the simple
+ * fact that we are implementing a workaround in the last 4KB
+ * of the iRAM and we have already defined these flag and address
+ * values in both kernel and U-Boot for our use.
+ */
+code_base:
+	b	 1f
+/*
+ * These addresses are being used as flags in u-boot and kernel.
+ *
+ * Jump address for resume and flag to check for resume/reset:
+ * Resume address - 0x2073008
+ * Resume flag - 0x207300C
+ *
+ * Jump address for cluster switching:
+ * Switch address - 0x2073018
+ *
+ * Jump address for core hotplug:
+ * Hotplug address - 0x207301C
+ *
+ * Jump address for C2 state (Reserved for future not being used right now):
+ * C2 address - 0x2073024
+ *
+ * Managed per core status for the active cluster:
+ * CPU0 state - 0x2073028
+ * CPU1 state - 0x207302C
+ * CPU2 state - 0x2073030
+ * CPU3 state - 0x2073034
+ *
+ * Managed per core GIC status for the active cluster:
+ * CPU0 gic state - 0x2073038
+ * CPU1 gic state - 0x207303C
+ * CPU2 gic state - 0x2073040
+ * CPU3 gic state - 0x2073044
+ *
+ * Logic of the code:
+ * Step-1: Read current CPU status.
+ * Step-2: If it's a resume then continue, else jump to step 4.
+ * Step-3: Clear inform1 PMU register and jump to inform0 value.
+ * Step-4: If it's a switch, C2 or reset, get the hotplug address.
+ * Step-5: If address is not available, enter WFE.
+ * Step-6: If address is available, jump to that address.
+ */
+	nop			     @ for backward compatibility
+	.word   0x0		     @ REG0: RESUME_ADDR
+	.word   0x0		     @ REG1: RESUME_FLAG
+	.word   0x0		     @ REG2
+	.word   0x0		     @ REG3
+_switch_addr:
+	.word   0x0		     @ REG4: SWITCH_ADDR
+_hotplug_addr:
+	.word   0x0		     @ REG5: CPU1_BOOT_REG
+	.word   0x0		     @ REG6
+_c2_addr:
+	.word   0x0		     @ REG7: REG_C2_ADDR
+_cpu_state:
+	.word   0x1		     @ CPU0_STATE : RESET
+	.word   0x2		     @ CPU1_STATE : SECONDARY RESET
+	.word   0x2		     @ CPU2_STATE : SECONDARY RESET
+	.word   0x2		     @ CPU3_STATE : SECONDARY RESET
+_gic_state:
+	.word   0x0		     @ CPU0 - GICD_IGROUPR0
+	.word   0x0		     @ CPU1 - GICD_IGROUPR0
+	.word   0x0		     @ CPU2 - GICD_IGROUPR0
+	.word   0x0		     @ CPU3 - GICD_IGROUPR0
+1:
+	adr     r0, _cpu_state
+	mrc     p15, 0, r7, c0, c0, 5   @ read MPIDR
+	and     r7, r7, #0xf	    @ r7 = cpu id
+/* Read the current cpu state */
+	ldr     r10, [r0, r7, lsl #2]
+svc_entry:
+	tst     r10, #(1 << 4)
+	adrne   r0, _switch_addr
+	bne     wait_for_addr
+/* Clear INFORM1 */
+	ldr     r0, =(0x10040000 + 0x804)
+	ldr     r1, [r0]
+	cmp     r1, #0x0
+	movne   r1, #0x0
+	strne   r1, [r0]
+/* Get INFORM0 */
+	ldrne   r1, =(0x10040000 + 0x800)
+	ldrne   pc, [r1]
+	tst     r10, #(1 << 0)
+	ldrne   pc, =0x23e00000
+	adr     r0, _hotplug_addr
+wait_for_addr:
+	ldr     r1, [r0]
+	cmp     r1, #0x0
+	bxne    r1
+	wfe
+	b	 wait_for_addr
+	.ltorg
+code_end:
+	mov	pc, lr
diff --git a/roms/u-boot/arch/arm/mach-exynos/soc.c b/roms/u-boot/arch/arm/mach-exynos/soc.c
new file mode 100644
index 000000000..a07c87a2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/soc.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2010 Samsung Electronics.
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_TARGET_ESPRESSO7420
+/*
+ * Exynos7420 uses CPU0 of Cluster-1 as boot CPU. Due to this, branch_if_master
+ * fails to identify as the boot CPU as the master CPU. As temporary workaround,
+ * setup the slave CPU boot address as "_main".
+ */
+extern void _main(void);
+void *secondary_boot_addr = (void *)_main;
+#endif /* CONFIG_TARGET_ESPRESSO7420 */
+
+void reset_cpu(void)
+{
+#ifdef CONFIG_CPU_V7A
+	writel(0x1, samsung_get_base_swreset());
+#endif
+}
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-exynos/spl_boot.c b/roms/u-boot/arch/arm/mach-exynos/spl_boot.c
new file mode 100644
index 000000000..722449881
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/spl_boot.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ */
+
+#include <common.h>
+#include <config.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+
+#include <asm/cache.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/spi.h>
+
+#include "common_setup.h"
+#include "clock_init.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Index into irom ptr table */
+enum index {
+	MMC_INDEX,
+	EMMC44_INDEX,
+	EMMC44_END_INDEX,
+	SPI_INDEX,
+	USB_INDEX,
+};
+
+/* IROM Function Pointers Table */
+u32 irom_ptr_table[] = {
+	[MMC_INDEX] = 0x02020030,	/* iROM Function Pointer-SDMMC boot */
+	[EMMC44_INDEX] = 0x02020044,	/* iROM Function Pointer-EMMC4.4 boot*/
+	[EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer
+						-EMMC4.4 end boot operation */
+	[SPI_INDEX] = 0x02020058,	/* iROM Function Pointer-SPI boot */
+	[USB_INDEX] = 0x02020070,	/* iROM Function Pointer-USB boot*/
+	};
+
+void *get_irom_func(int index)
+{
+	return (void *)*(u32 *)irom_ptr_table[index];
+}
+
+#ifdef CONFIG_USB_BOOTING
+/*
+ * Set/clear program flow prediction and return the previous state.
+ */
+static int config_branch_prediction(int set_cr_z)
+{
+	unsigned int cr;
+
+	/* System Control Register: 11th bit Z Branch prediction enable */
+	cr = get_cr();
+	set_cr(set_cr_z ? cr | CR_Z : cr & ~CR_Z);
+
+	return cr & CR_Z;
+}
+#endif
+
+#ifdef CONFIG_SPI_BOOTING
+static void spi_rx_tx(struct exynos_spi *regs, int todo,
+			void *dinp, void const *doutp, int i)
+{
+	uint *rxp = (uint *)(dinp + (i * (32 * 1024)));
+	int rx_lvl, tx_lvl;
+	uint out_bytes, in_bytes;
+
+	out_bytes = todo;
+	in_bytes = todo;
+	setbits_le32(&regs->ch_cfg, SPI_CH_RST);
+	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+	writel(((todo * 8) / 32) | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+
+	while (in_bytes) {
+		uint32_t spi_sts;
+		int temp;
+
+		spi_sts = readl(&regs->spi_sts);
+		rx_lvl = ((spi_sts >> 15) & 0x7f);
+		tx_lvl = ((spi_sts >> 6) & 0x7f);
+		while (tx_lvl < 32 && out_bytes) {
+			temp = 0xffffffff;
+			writel(temp, &regs->tx_data);
+			out_bytes -= 4;
+			tx_lvl += 4;
+		}
+		while (rx_lvl >= 4 && in_bytes) {
+			temp = readl(&regs->rx_data);
+			if (rxp)
+				*rxp++ = temp;
+			in_bytes -= 4;
+			rx_lvl -= 4;
+		}
+	}
+}
+
+/*
+ * Copy uboot from spi flash to RAM
+ *
+ * @parma uboot_size	size of u-boot to copy
+ * @param uboot_addr	address in u-boot to copy
+ */
+static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr)
+{
+	int upto, todo;
+	int i, timeout = 100;
+	struct exynos_spi *regs = (struct exynos_spi *)CONFIG_SYS_SPI_BASE;
+
+	set_spi_clk(PERIPH_ID_SPI1, 50000000); /* set spi clock to 50Mhz */
+	/* set the spi1 GPIO */
+	exynos_pinmux_config(PERIPH_ID_SPI1, PINMUX_FLAG_NONE);
+
+	/* set pktcnt and enable it */
+	writel(4 | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+	/* set FB_CLK_SEL */
+	writel(SPI_FB_DELAY_180, &regs->fb_clk);
+	/* set CH_WIDTH and BUS_WIDTH as word */
+	setbits_le32(&regs->mode_cfg, SPI_MODE_CH_WIDTH_WORD |
+					SPI_MODE_BUS_WIDTH_WORD);
+	clrbits_le32(&regs->ch_cfg, SPI_CH_CPOL_L); /* CPOL: active high */
+
+	/* clear rx and tx channel if set priveously */
+	clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
+
+	setbits_le32(&regs->swap_cfg, SPI_RX_SWAP_EN |
+			SPI_RX_BYTE_SWAP |
+			SPI_RX_HWORD_SWAP);
+
+	/* do a soft reset */
+	setbits_le32(&regs->ch_cfg, SPI_CH_RST);
+	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+
+	/* now set rx and tx channel ON */
+	setbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON | SPI_CH_HS_EN);
+	clrbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT); /* CS low */
+
+	/* Send read instruction (0x3h) followed by a 24 bit addr */
+	writel((SF_READ_DATA_CMD << 24) | SPI_FLASH_UBOOT_POS, &regs->tx_data);
+
+	/* waiting for TX done */
+	while (!(readl(&regs->spi_sts) & SPI_ST_TX_DONE)) {
+		if (!timeout) {
+			debug("SPI TIMEOUT\n");
+			break;
+		}
+		timeout--;
+	}
+
+	for (upto = 0, i = 0; upto < uboot_size; upto += todo, i++) {
+		todo = min(uboot_size - upto, (unsigned int)(1 << 15));
+		spi_rx_tx(regs, todo, (void *)(uboot_addr),
+			  (void *)(SPI_FLASH_UBOOT_POS), i);
+	}
+
+	setbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT);/* make the CS high */
+
+	/*
+	 * Let put controller mode to BYTE as
+	 * SPI driver does not support WORD mode yet
+	 */
+	clrbits_le32(&regs->mode_cfg, SPI_MODE_CH_WIDTH_WORD |
+					SPI_MODE_BUS_WIDTH_WORD);
+	writel(0, &regs->swap_cfg);
+
+	/*
+	 * Flush spi tx, rx fifos and reset the SPI controller
+	 * and clear rx/tx channel
+	 */
+	clrsetbits_le32(&regs->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST);
+	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+	clrbits_le32(&regs->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON);
+}
+#endif
+
+/*
+* Copy U-Boot from mmc to RAM:
+* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
+* Pointer to API (Data transfer from mmc to ram)
+*/
+void copy_uboot_to_ram(void)
+{
+	unsigned int bootmode = BOOT_MODE_OM;
+
+	u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
+	u32 offset = 0, size = 0;
+#ifdef CONFIG_SPI_BOOTING
+	struct spl_machine_param *param = spl_get_machine_params();
+#endif
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+	u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
+	void (*end_bootop_from_emmc)(void);
+#endif
+#ifdef CONFIG_USB_BOOTING
+	int is_cr_z_set;
+	unsigned int sec_boot_check;
+
+	/*
+	 * Note that older hardware (before Exynos5800) does not expect any
+	 * arguments, but it does not hurt to pass them, so a common function
+	 * prototype is used.
+	 */
+	u32 (*usb_copy)(u32 num_of_block, u32 *dst);
+
+	/* Read iRAM location to check for secondary USB boot mode */
+	sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
+	if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
+		bootmode = BOOT_MODE_USB;
+#endif
+
+	if (bootmode == BOOT_MODE_OM)
+		bootmode = get_boot_mode();
+
+	switch (bootmode) {
+#ifdef CONFIG_SPI_BOOTING
+	case BOOT_MODE_SERIAL:
+		/* Customised function to copy u-boot from SF */
+		exynos_spi_copy(param->uboot_size, CONFIG_SYS_TEXT_BASE);
+		break;
+#endif
+	case BOOT_MODE_SD:
+		offset = BL2_START_OFFSET;
+		size = BL2_SIZE_BLOC_COUNT;
+		copy_bl2 = get_irom_func(MMC_INDEX);
+		break;
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+	case BOOT_MODE_EMMC:
+		/* Set the FSYS1 clock divisor value for EMMC boot */
+		emmc_boot_clk_div_set();
+
+		copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
+		end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
+
+		copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+		end_bootop_from_emmc();
+		break;
+#endif
+#ifdef CONFIG_USB_BOOTING
+	case BOOT_MODE_USB:
+		/*
+		 * iROM needs program flow prediction to be disabled
+		 * before copy from USB device to RAM
+		 */
+		is_cr_z_set = config_branch_prediction(0);
+		usb_copy = get_irom_func(USB_INDEX);
+		usb_copy(0, (u32 *)CONFIG_SYS_TEXT_BASE);
+		config_branch_prediction(is_cr_z_set);
+		break;
+#endif
+	default:
+		break;
+	}
+
+	if (copy_bl2)
+		copy_bl2(offset, size, CONFIG_SYS_TEXT_BASE);
+}
+
+void memzero(void *s, size_t n)
+{
+	char *ptr = s;
+	size_t i;
+
+	for (i = 0; i < n; i++)
+		*ptr++ = '\0';
+}
+
+/**
+ * Set up the U-Boot global_data pointer
+ *
+ * This sets the address of the global data, and sets up basic values.
+ *
+ * @param gdp   Value to give to gd
+ */
+static void setup_global_data(gd_t *gdp)
+{
+	set_gd(gdp);
+	memzero((void *)gd, sizeof(gd_t));
+	gd->flags |= GD_FLG_RELOC;
+	gd->baudrate = CONFIG_BAUDRATE;
+	gd->have_console = 1;
+}
+
+void board_init_f(unsigned long bootflag)
+{
+	__aligned(8) gd_t local_gd;
+	__attribute__((noreturn)) void (*uboot)(void);
+
+	setup_global_data(&local_gd);
+
+	if (do_lowlevel_init())
+		power_exit_wakeup();
+
+	copy_uboot_to_ram();
+
+	/* Jump to U-Boot image */
+	uboot = (void *)CONFIG_SYS_TEXT_BASE;
+	(*uboot)();
+	/* Never returns Here */
+}
+
+/* Place Holders */
+void board_init_r(gd_t *id, ulong dest_addr)
+{
+	/* Function attribute is no-return */
+	/* This Function never executes */
+	while (1)
+		;
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/system.c b/roms/u-boot/arch/arm/mach-exynos/system.c
new file mode 100644
index 000000000..12d0d8fd3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/system.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/system.h>
+
+static void exynos5_set_usbhost_mode(unsigned int mode)
+{
+	struct exynos5_sysreg *sysreg =
+		(struct exynos5_sysreg *)samsung_get_base_sysreg();
+
+	/* Setting USB20PHY_CONFIG register to USB 2.0 HOST link */
+	if (mode == USB20_PHY_CFG_HOST_LINK_EN) {
+		setbits_le32(&sysreg->usb20phy_cfg,
+				USB20_PHY_CFG_HOST_LINK_EN);
+	} else {
+		clrbits_le32(&sysreg->usb20phy_cfg,
+				USB20_PHY_CFG_HOST_LINK_EN);
+	}
+}
+
+void set_usbhost_mode(unsigned int mode)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_usbhost_mode(mode);
+}
+
+static void exynos4_set_system_display(void)
+{
+	struct exynos4_sysreg *sysreg =
+	    (struct exynos4_sysreg *)samsung_get_base_sysreg();
+	unsigned int cfg = 0;
+
+	/*
+	 * system register path set
+	 * 0: MIE/MDNIE
+	 * 1: FIMD Bypass
+	 */
+	cfg = readl(&sysreg->display_ctrl);
+	cfg |= (1 << 1);
+	writel(cfg, &sysreg->display_ctrl);
+}
+
+static void exynos5_set_system_display(void)
+{
+	struct exynos5_sysreg *sysreg =
+	    (struct exynos5_sysreg *)samsung_get_base_sysreg();
+	unsigned int cfg = 0;
+
+	/*
+	 * system register path set
+	 * 0: MIE/MDNIE
+	 * 1: FIMD Bypass
+	 */
+	cfg = readl(&sysreg->disp1blk_cfg);
+	cfg |= (1 << 15);
+	writel(cfg, &sysreg->disp1blk_cfg);
+}
+
+void set_system_display_ctrl(void)
+{
+	if (cpu_is_exynos4())
+		exynos4_set_system_display();
+	else
+		exynos5_set_system_display();
+}
diff --git a/roms/u-boot/arch/arm/mach-exynos/tzpc.c b/roms/u-boot/arch/arm/mach-exynos/tzpc.c
new file mode 100644
index 000000000..abe8e7f45
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-exynos/tzpc.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Lowlevel setup for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ */
+
+#include <common.h>
+#include <asm/arch/tzpc.h>
+#include <asm/io.h>
+
+/* Setting TZPC[TrustZone Protection Controller] */
+void tzpc_init(void)
+{
+	struct exynos_tzpc *tzpc;
+	unsigned int addr, start = 0, end = 0;
+
+	start = samsung_get_base_tzpc();
+
+	if (cpu_is_exynos5())
+		end = start + ((EXYNOS5_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+	else if (cpu_is_exynos4())
+		end = start + ((EXYNOS4_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+
+	for (addr = start; addr <= end; addr += TZPC_BASE_OFFSET) {
+		tzpc = (struct exynos_tzpc *)addr;
+
+		if (addr == start)
+			writel(R0SIZE, &tzpc->r0size);
+
+		writel(DECPROTXSET, &tzpc->decprot0set);
+		writel(DECPROTXSET, &tzpc->decprot1set);
+
+		if (cpu_is_exynos5() && (addr == end))
+			break;
+
+		writel(DECPROTXSET, &tzpc->decprot2set);
+		writel(DECPROTXSET, &tzpc->decprot3set);
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-highbank/Kconfig b/roms/u-boot/arch/arm/mach-highbank/Kconfig
new file mode 100644
index 000000000..0e73c0414
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-highbank/Kconfig
@@ -0,0 +1,12 @@
+if ARCH_HIGHBANK
+
+config SYS_BOARD
+	default "highbank"
+
+config SYS_SOC
+	default "highbank"
+
+config SYS_CONFIG_NAME
+	default "highbank"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-highbank/Makefile b/roms/u-boot/arch/arm/mach-highbank/Makefile
new file mode 100644
index 000000000..029e266be
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-highbank/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	:= timer.o
diff --git a/roms/u-boot/arch/arm/mach-highbank/timer.c b/roms/u-boot/arch/arm/mach-highbank/timer.c
new file mode 100644
index 000000000..2423a0e37
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-highbank/timer.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * Based on arm926ejs/mx27/timer.c
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch-armv7/systimer.h>
+
+#undef SYSTIMER_BASE
+#define SYSTIMER_BASE		0xFFF34000	/* Timer 0 and 1 base	*/
+
+static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE;
+
+/*
+ * Start the timer
+ */
+int timer_init(void)
+{
+	/*
+	 * Setup timer0
+	 */
+	writel(0, &systimer_base->timer0control);
+	writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
+	writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
+	writel(SYSTIMER_EN | SYSTIMER_32BIT | SYSTIMER_PRESC_256,
+		&systimer_base->timer0control);
+
+	return 0;
+
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/Kconfig b/roms/u-boot/arch/arm/mach-imx/Kconfig
new file mode 100644
index 000000000..26bfc5ccc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/Kconfig
@@ -0,0 +1,174 @@
+config HAS_CAAM
+	bool
+
+config IMX_CONFIG
+	string
+
+config ROM_UNIFIED_SECTIONS
+	bool
+
+config SYSCOUNTER_TIMER
+	bool
+
+config GPT_TIMER
+	bool
+
+config IMX_RDC
+	bool "i.MX Resource domain controller driver"
+	depends on ARCH_MX6 || ARCH_MX7
+	help
+	  i.MX Resource domain controller is used to assign masters
+	  and peripherals to differet domains. This can be used to
+	  isolate resources.
+
+config IMX_BOOTAUX
+	bool "Support boot auxiliary core"
+	depends on ARCH_MX7 || ARCH_MX6 || ARCH_VF610 || ARCH_IMX8M
+	help
+	  bootaux [addr] to boot auxiliary core.
+
+config IMX_MODULE_FUSE
+	bool "i.MX Module Fuse"
+	depends on ARCH_MX6
+	help
+	  i.MX module fuse to runtime disable some driver, including
+	  Linux OS device node.
+
+config USE_IMXIMG_PLUGIN
+	bool "Use imximage plugin code"
+	depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX7ULP
+	help
+	  i.MX6/7 supports DCD and Plugin. Enable this configuration
+	  to use Plugin, otherwise DCD will be used.
+
+config IMX_HAB
+	bool "Support i.MX HAB features"
+	depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5 || ARCH_IMX8M
+	select FSL_CAAM if HAS_CAAM
+	imply CMD_DEKBLOB if HAS_CAAM
+	help
+	  This option enables the support for secure boot (HAB).
+	  See doc/imx/habv4/* for more details.
+
+config CSF_SIZE
+	hex "Maximum size for Command Sequence File (CSF) binary"
+	depends on IMX_HAB
+	default 0x2000 if ARCH_IMX8M
+	default 0x2060
+	help
+	  Define the maximum size for Command Sequence File (CSF) binary
+	  this information is used to define the image boot data.
+
+config CMD_BMODE
+	bool "Support the 'bmode' command"
+	default y
+	depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5
+	help
+	  This enables the 'bmode' (bootmode) command for forcing
+	  a boot from specific media.
+
+	  This is useful for forcing the ROM's usb downloader to
+	  activate upon a watchdog reset which is nice when iterating
+	  on U-Boot.  Using the reset button or running bmode normal
+	  will set it back to normal.  This command currently
+	  supports i.MX53 and i.MX6.
+
+config CMD_DEKBLOB
+	bool "Support the 'dek_blob' command"
+	select IMX_CAAM_DEK_ENCAP if ARCH_MX6 || ARCH_MX7 || ARCH_MX7ULP
+	select IMX_OPTEE_DEK_ENCAP if ARCH_IMX8M
+	select IMX_SECO_DEK_ENCAP if ARCH_IMX8
+	help
+	  This enables the 'dek_blob' command which is used with the
+	  Freescale secure boot mechanism. This command encapsulates and
+	  creates a blob of data. See also CMD_BLOB and doc/imx/habv4/* for
+	  more information.
+
+config IMX_CAAM_DEK_ENCAP
+	bool "Support the DEK blob encapsulation with CAAM U-Boot driver"
+	help
+	  This enables the DEK blob encapsulation with the U-Boot CAAM driver.
+	  This option is only available on imx6, imx7 and imx7ulp.
+
+config IMX_OPTEE_DEK_ENCAP
+	select TEE
+	select OPTEE
+	bool "Support the DEK blob encapsulation with OP-TEE"
+	help
+	  This enabled the DEK blob encapsulation with OP-TEE. The communication
+	  with OP-TEE is done through a SMC call and OP-TEE shared memory. This
+	  option is available on imx8mm.
+
+config IMX_SECO_DEK_ENCAP
+	bool "Support the DEK blob encapsulation with SECO"
+	help
+	  This enabled the DEK blob encapsulation with the SECO API. This option
+	  is only available on imx8.
+
+config CMD_PRIBLOB
+	bool "Support the set_priblob_bitfield command"
+	depends on HAS_CAAM && IMX_HAB
+	help
+	  This option enables the priblob command which can be used
+		to set the priblob setting to 0x3.
+
+config CMD_HDMIDETECT
+	bool "Support the 'hdmidet' command"
+	help
+	  This enables the 'hdmidet' command which detects if an HDMI monitor
+	  is connected.
+
+config CMD_NANDBCB
+	bool "i.MX6 NAND Boot Control Block(BCB) command"
+	depends on MTD_RAW_NAND && CMD_MTDPARTS
+	select BCH if MX6UL || MX6ULL
+	default y if ((ARCH_MX6 || ARCH_MX7 || ARCH_IMX8M) && NAND_MXS)
+	help
+	  Unlike normal 'nand write/erase' commands, this command update
+	  Boot Control Block(BCB) for i.MX6 platform NAND IP's.
+
+	  This is similar to kobs-ng, which is used in Linux as separate
+	  rootfs package.
+
+config FSL_MFGPROT
+	bool "Support the 'mfgprot' command"
+	depends on IMX_HAB && ARCH_MX7
+	help
+	  This option enables the manufacturing protection command
+	  which can be used has a protection feature for Manufacturing
+	  process. With this tool is possible to authenticate the
+	  chip to the OEM's server.
+
+config NXP_BOARD_REVISION
+	bool "Read NXP board revision from fuses"
+	depends on ARCH_MX6 || ARCH_MX7
+	help
+	  NXP boards based on i.MX6/7 contain the board revision information
+	  stored in the fuses. Select this option if you want to be able to
+	  retrieve the board revision information.
+
+config DDRMC_VF610_CALIBRATION
+	bool "Enable DDRMC (DDR3) on-chip calibration"
+	depends on ARCH_VF610
+	help
+	  Vybrid (vf610) SoC provides some on-chip facility to tune the DDR3
+	  memory parameters. Select this option if you want to calculate them
+	  at boot time.
+	  NOTE:
+	  NXP does NOT recommend to perform this calibration at each boot. One
+	  shall perform it on a new PCB and then use those values to program
+	  the ddrmc_cr_setting on relevant board file.
+
+config SPL_IMX_ROMAPI_LOADADDR
+	hex "Default load address to load image through ROM API"
+	depends on IMX8MN || IMX8MP
+
+config IMX_DCD_ADDR
+	hex "DCD Blocks location on the image"
+	default 0x00910000 if !ARCH_MX7ULP
+	default 0x2f010000 if ARCH_MX7ULP
+	help
+	  Indicates where the Device Configuration Data, a binary table used by
+	  the ROM code to configure the device at early boot stage, is located.
+	  This information is shared with the user via mkimage -l just so the
+	  image can be signed.
diff --git a/roms/u-boot/arch/arm/mach-imx/Makefile b/roms/u-boot/arch/arm/mach-imx/Makefile
new file mode 100644
index 000000000..82aa39dee
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/Makefile
@@ -0,0 +1,234 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+
+ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 imx8m vf610))
+obj-y	= iomux-v3.o
+endif
+
+ifeq ($(SOC),$(filter $(SOC),imx8m))
+ifneq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
+endif
+obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
+obj-$(CONFIG_FEC_MXC) += mac.o
+obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
+obj-$(CONFIG_IMX_HAB) += hab.o
+obj-y += cpu.o
+endif
+
+ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
+obj-y	+= cpu.o speed.o
+ifneq ($(CONFIG_MX51),y)
+obj-y	+= mmdc_size.o
+endif
+obj-$(CONFIG_GPT_TIMER) += timer.o
+obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
+endif
+ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m imx8 imxrt))
+obj-y	+= misc.o
+obj-$(CONFIG_CMD_PRIBLOB) += priblob.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
+endif
+ifeq ($(SOC),$(filter $(SOC),mx7))
+obj-y 	+= cpu.o
+obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
+obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
+obj-$(CONFIG_FSL_MFGPROT) += cmd_mfgprot.o
+endif
+ifeq ($(SOC),$(filter $(SOC),mx5 mx6 mx7))
+obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
+endif
+ifeq ($(SOC),$(filter $(SOC),mx6 mx7))
+obj-y 	+= cache.o init.o
+obj-$(CONFIG_FEC_MXC) += mac.o
+obj-$(CONFIG_IMX_RDC) += rdc-sema.o
+ifneq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
+endif
+obj-$(CONFIG_SATA) += sata.o
+obj-$(CONFIG_IMX_HAB)    += hab.o
+obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
+endif
+ifeq ($(SOC),$(filter $(SOC),mx7ulp))
+obj-y  += cache.o mmdc_size.o
+obj-$(CONFIG_IMX_HAB) += hab.o
+endif
+ifeq ($(SOC),$(filter $(SOC),vf610))
+obj-y += ddrmc-vf610.o
+obj-$(CONFIG_DDRMC_VF610_CALIBRATION) += ddrmc-vf610-calibration.o
+endif
+ifneq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
+obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
+obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
+obj-$(CONFIG_CMD_NANDBCB) += cmd_nandbcb.o
+endif
+
+PLUGIN = board/$(BOARDDIR)/plugin
+
+ifeq ($(CONFIG_USE_IMXIMG_PLUGIN),y)
+
+$(PLUGIN).o: $(PLUGIN).S FORCE
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,as_o_S)
+
+$(PLUGIN).bin: $(PLUGIN).o FORCE
+	$(Q)mkdir -p $(dir $@)
+	$(OBJCOPY) -O binary --gap-fill 0xff $< $@
+else
+
+$(PLUGIN).bin:
+
+endif
+
+quiet_cmd_cpp_cfg = CFGS    $@
+      cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+
+# mkimage source config file
+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
+
+# How to create a cpp processed config file, they all use the same source
+%.cfgout: $(IMX_CONFIG) FORCE
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,cpp_cfg)
+
+IMX_CONTAINER_CFG = $(CONFIG_IMX_CONTAINER_CFG:"%"=%)
+container.cfg: $(IMX_CONTAINER_CFG) FORCE
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,cpp_cfg)
+
+ifeq ($(CONFIG_ARCH_IMX8), y)
+CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh
+IMAGE_TYPE := imx8image
+ifeq ($(CONFIG_SPL_BUILD),y)
+SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi)
+endif
+DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi)
+else ifeq ($(CONFIG_ARCH_IMX8M), y)
+IMAGE_TYPE := imx8mimage
+IMX8M_DEPFILES := $(srctree)/tools/imx8m_image.sh
+DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG);if [ -f spl/u-boot-spl.cfgout ]; then $(IMX8M_DEPFILES) spl/u-boot-spl.cfgout 0; echo $$?; fi)
+else
+IMAGE_TYPE := imximage
+DEPFILE_EXISTS := 0
+endif
+
+MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
+	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
+u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
+
+u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
+	$(call if_changed,mkimage)
+
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
+	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
+u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+
+u-boot-dtb.imx: u-boot-fit-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ifeq ($(DEPFILE_EXISTS),0)
+	$(call if_changed,mkimage)
+endif
+else ifeq ($(CONFIG_OF_SEPARATE),y)
+MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
+	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
+u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+
+u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ifeq ($(DEPFILE_EXISTS),0)
+	$(call if_changed,mkimage)
+endif
+endif
+
+ifdef CONFIG_ARM64
+ifeq ($(CONFIG_ARCH_IMX8M), y)
+SPL:
+
+MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout \
+		   -T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
+flash.bin: MKIMAGEOUTPUT = flash.log
+
+spl/u-boot-spl-ddr.bin: spl/u-boot-spl.bin spl/u-boot-spl.cfgout FORCE
+ifeq ($(DEPFILE_EXISTS),0)
+	$(IMX8M_DEPFILES) spl/u-boot-spl.cfgout 1
+endif
+
+flash.bin: spl/u-boot-spl-ddr.bin u-boot.itb FORCE
+	$(call if_changed,mkimage)
+endif
+
+ifeq ($(CONFIG_ARCH_IMX8), y)
+SPL:
+
+MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout -T $(IMAGE_TYPE) -e 0x100000
+flash.bin: MKIMAGEOUTPUT = flash.log
+
+MKIMAGEFLAGS_u-boot.cnt = -n container.cfg -T $(IMAGE_TYPE) -e 0x100000
+u-boot.cnt: MKIMAGEOUTPUT = u-boot.cnt.log
+
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin container.cfg FORCE
+	$(call if_changed,mkimage)
+flash.bin: spl/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+	@flashbin_size=`wc -c flash.bin | awk '{print $$1}'`; \
+                   pad_cnt=$$(((flashbin_size + 0x400 - 1) / 0x400)); \
+                   echo "append u-boot.cnt at $$pad_cnt KB"; \
+                   dd if=u-boot.cnt of=flash.bin bs=1K seek=$$pad_cnt;
+else
+flash.bin: spl/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+endif
+endif
+
+else
+MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
+		   -T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
+SPL: MKIMAGEOUTPUT = SPL.log
+
+SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
+	$(call if_changed,mkimage)
+
+MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+		-e $(CONFIG_SYS_TEXT_BASE) -C none -T firmware
+
+u-boot.uim: u-boot.bin FORCE
+	$(call if_changed,mkimage)
+
+OBJCOPYFLAGS += -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+append = cat $(filter-out $< $(PHONY), $^) >> $@
+
+quiet_cmd_pad_cat = CAT     $@
+cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
+
+u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
+	$(call if_changed,pad_cat)
+
+u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
+	$(call if_changed,pad_cat)
+
+quiet_cmd_u-boot-nand-spl_imx = GEN     $@
+cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
+	dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | cat - $< > $@
+
+spl/u-boot-nand-spl.imx: SPL FORCE
+	$(call if_changed,u-boot-nand-spl_imx)
+endif
+
+targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
+
+obj-$(CONFIG_ARM64) += lowlevel.o
+
+obj-$(CONFIG_MX5) += mx5/
+obj-$(CONFIG_MX6) += mx6/
+obj-$(CONFIG_MX7) += mx7/
+obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/
+obj-$(CONFIG_IMX8M) += imx8m/
+obj-$(CONFIG_ARCH_IMX8) += imx8/
+obj-$(CONFIG_ARCH_IMXRT) += imxrt/
+
+obj-$(CONFIG_SPL_BOOTROM_SUPPORT) += spl_imx_romapi.o
diff --git a/roms/u-boot/arch/arm/mach-imx/cache.c b/roms/u-boot/arch/arm/mach-imx/cache.c
new file mode 100644
index 000000000..4e3b49a3f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/cache.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/armv7.h>
+#include <asm/cache.h>
+#include <asm/pl310.h>
+#include <asm/io.h>
+#include <asm/mach-imx/sys_proto.h>
+
+static void enable_ca7_smp(void)
+{
+	u32 val;
+
+	/* Read MIDR */
+	asm volatile ("mrc p15, 0, %0, c0, c0, 0\n\t" : "=r"(val));
+	val = (val >> 4);
+	val &= 0xf;
+
+	/* Only set the SMP for Cortex A7 */
+	if (val == 0x7) {
+		/* Read auxiliary control register */
+		asm volatile ("mrc p15, 0, %0, c1, c0, 1\n\t" : "=r"(val));
+
+		if (val & (1 << 6))
+			return;
+
+		/* Enable SMP */
+		val |= (1 << 6);
+
+		/* Write auxiliary control register */
+		asm volatile ("mcr p15, 0, %0, c1, c0, 1\n\t" : : "r"(val));
+
+		DSB;
+		ISB;
+	}
+}
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+	enum dcache_option option = DCACHE_WRITETHROUGH;
+#else
+	enum dcache_option option = DCACHE_WRITEBACK;
+#endif
+	/* Avoid random hang when download by usb */
+	invalidate_dcache_all();
+
+	/* Set ACTLR.SMP bit for Cortex-A7 */
+	enable_ca7_smp();
+
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+
+	/* Enable caching on OCRAM and ROM */
+	mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
+					ROMCP_ARB_END_ADDR,
+					option);
+	mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
+					IRAM_SIZE,
+					option);
+}
+#else
+void enable_caches(void)
+{
+	/*
+	 * Set ACTLR.SMP bit for Cortex-A7, even if the caches are
+	 * disabled by u-boot
+	 */
+	enable_ca7_smp();
+
+	puts("WARNING: Caches not enabled\n");
+}
+#endif
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#ifdef CONFIG_SYS_L2_PL310
+#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002
+void v7_outer_cache_enable(void)
+{
+	struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	unsigned int val, cache_id;
+
+
+	/*
+	 * Must disable the L2 before changing the latency parameters
+	 * and auxiliary control register.
+	 */
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+
+	/*
+	 * Set bit 22 in the auxiliary control register. If this bit
+	 * is cleared, PL310 treats Normal Shared Non-cacheable
+	 * accesses as Cacheable no-allocate.
+	 */
+	setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
+
+	if (is_mx6sl() || is_mx6sll()) {
+		val = readl(&iomux->gpr[11]);
+		if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
+			/* L2 cache configured as OCRAM, reset it */
+			val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
+			writel(val, &iomux->gpr[11]);
+		}
+	}
+
+	writel(0x132, &pl310->pl310_tag_latency_ctrl);
+	writel(0x132, &pl310->pl310_data_latency_ctrl);
+
+	val = readl(&pl310->pl310_prefetch_ctrl);
+
+	/* Turn on the L2 I/D prefetch, double linefill */
+	/* Set prefetch offset with any value except 23 as per errata 765569 */
+	val |= 0x7000000f;
+
+	/*
+	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
+	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL/SX/DQP
+	 * is r3p2.
+	 * But according to ARM PL310 errata: 752271
+	 * ID: 752271: Double linefill feature can cause data corruption
+	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
+	 * Workaround: The only workaround to this erratum is to disable the
+	 * double linefill feature. This is the default behavior.
+	 */
+	cache_id = readl(&pl310->pl310_cache_id);
+	if (((cache_id & L2X0_CACHE_ID_PART_MASK) == L2X0_CACHE_ID_PART_L310)
+	    && ((cache_id & L2X0_CACHE_ID_RTL_MASK) < L2X0_CACHE_ID_RTL_R3P2))
+		val &= ~(1 << 30);
+	writel(val, &pl310->pl310_prefetch_ctrl);
+
+	val = readl(&pl310->pl310_power_ctrl);
+	val |= L2X0_DYNAMIC_CLK_GATING_EN;
+	val |= L2X0_STNDBY_MODE_EN;
+	writel(val, &pl310->pl310_power_ctrl);
+
+	setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+
+void v7_outer_cache_disable(void)
+{
+	struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+#endif /* !CONFIG_SYS_L2_PL310 */
+#endif /* !CONFIG_SYS_L2CACHE_OFF */
diff --git a/roms/u-boot/arch/arm/mach-imx/cmd_bmode.c b/roms/u-boot/arch/arm/mach-imx/cmd_bmode.c
new file mode 100644
index 000000000..cb317499d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/cmd_bmode.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Boundary Devices Inc.
+ */
+#include <common.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <malloc.h>
+#include <command.h>
+
+static const struct boot_mode *modes[2];
+
+static const struct boot_mode *search_modes(char *arg)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(modes); i++) {
+		const struct boot_mode *p = modes[i];
+		if (p) {
+			while (p->name) {
+				if (!strcmp(p->name, arg))
+					return p;
+				p++;
+			}
+		}
+	}
+	return NULL;
+}
+
+static int create_usage(char *dest)
+{
+	int i;
+	int size = 0;
+
+	for (i = 0; i < ARRAY_SIZE(modes); i++) {
+		const struct boot_mode *p = modes[i];
+		if (p) {
+			while (p->name) {
+				int len = strlen(p->name);
+				if (dest) {
+					memcpy(dest, p->name, len);
+					dest += len;
+					*dest++ = '|';
+				}
+				size += len + 1;
+				p++;
+			}
+		}
+	}
+	if (dest)
+		memcpy(dest - 1, " [noreset]", 11);	/* include trailing 0 */
+	size += 10;
+
+	if (dest)
+		memcpy(dest - 1, "\nbmode - getprisec", 19);
+	size += 18;
+
+	return size;
+}
+
+__weak int boot_mode_getprisec(void)
+{
+	return 0;
+}
+
+static int do_boot_mode(struct cmd_tbl *cmdtp, int flag, int argc,
+			char *const argv[])
+{
+	const struct boot_mode *p;
+	int reset_requested = 1;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+	if (!strcmp(argv[1], "getprisec"))
+		return boot_mode_getprisec();
+	p = search_modes(argv[1]);
+	if (!p)
+		return CMD_RET_USAGE;
+	if (argc == 3) {
+		if (strcmp(argv[2], "noreset"))
+			return CMD_RET_USAGE;
+		reset_requested = 0;
+	}
+
+	boot_mode_apply(p->cfg_val);
+	if (reset_requested && p->cfg_val)
+		do_reset(NULL, 0, 0, NULL);
+	return 0;
+}
+
+U_BOOT_CMD(
+	bmode, 3, 0, do_boot_mode,
+	NULL,
+	"");
+
+void add_board_boot_modes(const struct boot_mode *p)
+{
+	int size;
+	char *dest;
+
+	struct cmd_tbl *entry = ll_entry_get(struct cmd_tbl, bmode, cmd);
+
+	if (entry->usage) {
+		free(entry->usage);
+		entry->usage = NULL;
+	}
+
+	modes[0] = p;
+	modes[1] = soc_boot_modes;
+	size = create_usage(NULL);
+	dest = malloc(size);
+	if (dest) {
+		create_usage(dest);
+		entry->usage = dest;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/cmd_dek.c b/roms/u-boot/arch/arm/mach-imx/cmd_dek.c
new file mode 100644
index 000000000..b10ead194
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/cmd_dek.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2008-2015 Freescale Semiconductor, Inc.
+ *
+ * Command for encapsulating DEK blob
+ */
+
+#include <common.h>
+#include <command.h>
+#include <log.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+#include <linux/compiler.h>
+#include <fsl_sec.h>
+#include <asm/arch/clock.h>
+#include <mapmem.h>
+#include <tee.h>
+#ifdef CONFIG_IMX_SECO_DEK_ENCAP
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/image.h>
+#endif
+#include <cpu_func.h>
+
+/**
+* blob_dek() - Encapsulate the DEK as a blob using CAM's Key
+* @src: - Address of data to be encapsulated
+* @dst: - Desination address of encapsulated data
+* @len: - Size of data to be encapsulated
+*
+* Returns zero on success,and negative on error.
+*/
+#ifdef CONFIG_IMX_CAAM_DEK_ENCAP
+static int blob_encap_dek(u32 src_addr, u32 dst_addr, u32 len)
+{
+	u8 *src_ptr, *dst_ptr;
+
+	src_ptr = map_sysmem(src_addr, len / 8);
+	dst_ptr = map_sysmem(dst_addr, BLOB_SIZE(len / 8));
+
+	hab_caam_clock_enable(1);
+
+	u32 out_jr_size = sec_in32(CONFIG_SYS_FSL_JR0_ADDR +
+				   FSL_CAAM_ORSR_JRa_OFFSET);
+	if (out_jr_size != FSL_CAAM_MAX_JR_SIZE)
+		sec_init();
+
+	if (!((len == 128) | (len == 192) | (len == 256))) {
+		debug("Invalid DEK size. Valid sizes are 128, 192 and 256b\n");
+		return -1;
+	}
+
+	len /= 8;
+	return blob_dek(src_ptr, dst_ptr, len);
+}
+#endif /* CONFIG_IMX_CAAM_DEK_ENCAP */
+
+#ifdef CONFIG_IMX_OPTEE_DEK_ENCAP
+
+#define PTA_DEK_BLOB_PTA_UUID {0xef477737, 0x0db1, 0x4a9d, \
+	{0x84, 0x37, 0xf2, 0xf5, 0x35, 0xc0, 0xbd, 0x92} }
+
+#define OPTEE_BLOB_HDR_SIZE		8
+
+static int blob_encap_dek(u32 src_addr, u32 dst_addr, u32 len)
+{
+	struct udevice *dev = NULL;
+	struct tee_shm *shm_input, *shm_output;
+	struct tee_open_session_arg arg = {0};
+	struct tee_invoke_arg arg_func = {0};
+	const struct tee_optee_ta_uuid uuid = PTA_DEK_BLOB_PTA_UUID;
+	struct tee_param param[4] = {0};
+	int ret;
+
+	/* Get tee device */
+	dev = tee_find_device(NULL, NULL, NULL, NULL);
+	if (!dev) {
+		printf("Cannot get OP-TEE device\n");
+		return -1;
+	}
+
+	/* Set TA UUID */
+	tee_optee_ta_uuid_to_octets(arg.uuid, &uuid);
+
+	/* Open TA session */
+	ret = tee_open_session(dev, &arg, 0, NULL);
+	if (ret < 0) {
+		printf("Cannot open session with PTA Blob 0x%X\n", ret);
+		return -1;
+	}
+
+	/* Allocate shared input and output buffers for TA */
+	ret = tee_shm_register(dev, (void *)(ulong)src_addr, len / 8, 0x0, &shm_input);
+	if (ret < 0) {
+		printf("Cannot register input shared memory 0x%X\n", ret);
+		goto error;
+	}
+
+	ret = tee_shm_register(dev, (void *)(ulong)dst_addr,
+			       BLOB_SIZE(len / 8) + OPTEE_BLOB_HDR_SIZE,
+			       0x0, &shm_output);
+	if (ret < 0) {
+		printf("Cannot register output shared memory 0x%X\n", ret);
+		goto error;
+	}
+
+	param[0].u.memref.shm	= shm_input;
+	param[0].u.memref.size	= shm_input->size;
+	param[0].attr		= TEE_PARAM_ATTR_TYPE_MEMREF_INPUT;
+	param[1].u.memref.shm	= shm_output;
+	param[1].u.memref.size	= shm_output->size;
+	param[1].attr		= TEE_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
+	param[2].attr		= TEE_PARAM_ATTR_TYPE_NONE;
+	param[3].attr		= TEE_PARAM_ATTR_TYPE_NONE;
+
+	arg_func.func = 0;
+	arg_func.session = arg.session;
+
+	/* Generate DEK blob */
+	arg_func.session = arg.session;
+	ret = tee_invoke_func(dev, &arg_func, 4, param);
+	if (ret < 0)
+		printf("Cannot generate Blob with PTA DEK Blob 0x%X\n", ret);
+
+error:
+	/* Free shared memory */
+	tee_shm_free(shm_input);
+	tee_shm_free(shm_output);
+
+	/* Close session */
+	ret = tee_close_session(dev, arg.session);
+	if (ret < 0)
+		printf("Cannot close session with PTA DEK Blob 0x%X\n", ret);
+
+	return ret;
+}
+#endif /* CONFIG_IMX_OPTEE_DEK_ENCAP */
+#ifdef CONFIG_IMX_SECO_DEK_ENCAP
+
+#define DEK_BLOB_KEY_ID				0x0
+
+#define AHAB_PRIVATE_KEY			0x81
+#define AHAB_VERSION				0x00
+#define AHAB_MODE_CBC				0x67
+#define AHAB_ALG_AES				0x55
+#define AHAB_128_AES_KEY			0x10
+#define AHAB_192_AES_KEY			0x18
+#define AHAB_256_AES_KEY			0x20
+#define AHAB_FLAG_KEK				0x80
+#define AHAB_DEK_BLOB				0x01
+
+#define DEK_BLOB_HDR_SIZE			8
+#define SECO_PT					2U
+
+static int blob_encap_dek(u32 src_addr, u32 dst_addr, u32 len)
+{
+	sc_err_t err;
+	sc_rm_mr_t mr_input, mr_output;
+	struct generate_key_blob_hdr hdr;
+	u8 in_size, out_size;
+	u8 *src_ptr, *dst_ptr;
+	int ret = 0;
+	int i;
+
+	/* Set sizes */
+	in_size = sizeof(struct generate_key_blob_hdr) + len / 8;
+	out_size = BLOB_SIZE(len / 8) + DEK_BLOB_HDR_SIZE;
+
+	/* Get src and dst virtual addresses */
+	src_ptr = map_sysmem(src_addr, in_size);
+	dst_ptr = map_sysmem(dst_addr, out_size);
+
+	/* Check addr input */
+	if (!(src_ptr && dst_ptr)) {
+		debug("src_addr or dst_addr invalid\n");
+		return -1;
+	}
+
+	/* Build key header */
+	hdr.version = AHAB_VERSION;
+	hdr.length_lsb = sizeof(struct generate_key_blob_hdr) + len / 8;
+	hdr.length_msb = 0x00;
+	hdr.tag = AHAB_PRIVATE_KEY;
+	hdr.flags = AHAB_DEK_BLOB;
+	hdr.algorithm = AHAB_ALG_AES;
+	hdr.mode = AHAB_MODE_CBC;
+
+	switch (len) {
+	case 128:
+		hdr.size = AHAB_128_AES_KEY;
+		break;
+	case 192:
+		hdr.size = AHAB_192_AES_KEY;
+		break;
+	case 256:
+		hdr.size = AHAB_256_AES_KEY;
+		break;
+	default:
+		/* Not supported */
+		debug("Invalid DEK size. Valid sizes are 128, 192 and 256b\n");
+		return -1;
+	}
+
+	/* Build input message */
+	memmove((void *)(src_ptr + sizeof(struct generate_key_blob_hdr)),
+		(void *)src_ptr, len / 8);
+	memcpy((void *)src_ptr, (void *)&hdr,
+	       sizeof(struct generate_key_blob_hdr));
+
+	/* Flush the cache before triggering the CAAM DMA */
+	flush_dcache_range(src_addr, src_addr + in_size);
+
+	/* Find input memory region */
+	err = sc_rm_find_memreg((-1), &mr_input, src_addr & ~(CONFIG_SYS_CACHELINE_SIZE - 1),
+				ALIGN(src_addr + in_size, CONFIG_SYS_CACHELINE_SIZE));
+	if (err) {
+		printf("Error: find memory region 0x%X\n", src_addr);
+		return -ENOMEM;
+	}
+
+	/* Find output memory region */
+	err = sc_rm_find_memreg((-1), &mr_output, dst_addr & ~(CONFIG_SYS_CACHELINE_SIZE - 1),
+				ALIGN(dst_addr + out_size, CONFIG_SYS_CACHELINE_SIZE));
+	if (err) {
+		printf("Error: find memory region 0x%X\n", dst_addr);
+		return -ENOMEM;
+	}
+
+	/* Set memory region permissions for SECO */
+	err = sc_rm_set_memreg_permissions(-1, mr_input, SECO_PT,
+					   SC_RM_PERM_FULL);
+	if (err) {
+		printf("Set permission failed for input memory region\n");
+		ret = -EPERM;
+		goto error;
+	}
+
+	err = sc_rm_set_memreg_permissions(-1, mr_output, SECO_PT,
+					   SC_RM_PERM_FULL);
+	if (err) {
+		printf("Set permission failed for output memory region\n");
+		ret = -EPERM;
+		goto error;
+	}
+
+	/* Flush output data before SECO operation */
+	flush_dcache_range((ulong)dst_ptr, (ulong)(dst_ptr +
+			roundup(out_size, ARCH_DMA_MINALIGN)));
+
+	/* Generate DEK blob */
+	err = sc_seco_gen_key_blob((-1), 0x0, src_addr, dst_addr, out_size);
+	if (err) {
+		ret = -EPERM;
+		goto error;
+	}
+
+	/* Invalidate output buffer */
+	invalidate_dcache_range((ulong)dst_ptr, (ulong)(dst_ptr +
+			roundup(out_size, ARCH_DMA_MINALIGN)));
+
+	printf("DEK Blob\n");
+	for (i = 0; i < DEK_BLOB_HDR_SIZE + BLOB_SIZE(len / 8); i++)
+		printf("%02X", dst_ptr[i]);
+	printf("\n");
+
+error:
+	/* Remove memory region permission to SECO */
+	err = sc_rm_set_memreg_permissions(-1, mr_input, SECO_PT,
+					   SC_RM_PERM_NONE);
+	if (err) {
+		printf("Error: remove permission failed for input\n");
+		ret = -EPERM;
+	}
+
+	err = sc_rm_set_memreg_permissions(-1, mr_output, SECO_PT,
+					   SC_RM_PERM_NONE);
+	if (err) {
+		printf("Error: remove permission failed for output\n");
+		ret = -EPERM;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_IMX_SECO_DEK_ENCAP */
+
+/**
+ * do_dek_blob() - Handle the "dek_blob" command-line command
+ * @cmdtp:  Command data struct pointer
+ * @flag:   Command flag
+ * @argc:   Command-line argument count
+ * @argv:   Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_dek_blob(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	uint32_t src_addr, dst_addr, len;
+
+	if (argc != 4)
+		return CMD_RET_USAGE;
+
+	src_addr = simple_strtoul(argv[1], NULL, 16);
+	dst_addr = simple_strtoul(argv[2], NULL, 16);
+	len = simple_strtoul(argv[3], NULL, 10);
+
+	return blob_encap_dek(src_addr, dst_addr, len);
+}
+
+/***************************************************/
+static char dek_blob_help_text[] =
+	"src dst len            - Encapsulate and create blob of data\n"
+	"                         $len bits long at address $src and\n"
+	"                         store the result at address $dst.\n";
+
+U_BOOT_CMD(
+	dek_blob, 4, 1, do_dek_blob,
+	"Data Encryption Key blob encapsulation",
+	dek_blob_help_text
+);
diff --git a/roms/u-boot/arch/arm/mach-imx/cmd_hdmidet.c b/roms/u-boot/arch/arm/mach-imx/cmd_hdmidet.c
new file mode 100644
index 000000000..e2571adfb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/cmd_hdmidet.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Boundary Devices Inc.
+ */
+#include <common.h>
+#include <command.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/io.h>
+
+static int do_hdmidet(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	return (readb(&hdmi->phy_stat0) & HDMI_DVI_STAT) ? 0 : 1;
+}
+
+U_BOOT_CMD(hdmidet, 1, 1, do_hdmidet,
+	"detect HDMI monitor",
+	""
+);
diff --git a/roms/u-boot/arch/arm/mach-imx/cmd_mfgprot.c b/roms/u-boot/arch/arm/mach-imx/cmd_mfgprot.c
new file mode 100644
index 000000000..1430f6190
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/cmd_mfgprot.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * These commands enable the use of the CAAM MPPubK-generation and MPSign
+ * functions in supported i.MX devices.
+ */
+
+#include <asm/byteorder.h>
+#include <asm/arch/clock.h>
+#include <linux/compiler.h>
+#include <command.h>
+#include <common.h>
+#include <environment.h>
+#include <fsl_sec.h>
+#include <mapmem.h>
+#include <memalign.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * do_mfgprot() - Handle the "mfgprot" command-line command
+ * @cmdtp:  Command data struct pointer
+ * @flag:   Command flag
+ * @argc:   Command-line argument count
+ * @argv:   Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_mfgprot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	u8 *m_ptr, *dgst_ptr, *c_ptr, *d_ptr, *dst_ptr;
+	char *pubk, *sign, *sel;
+	int m_size, i, ret;
+	u32 m_addr;
+
+	pubk = "pubk";
+	sign = "sign";
+	sel = argv[1];
+
+	/* Enable HAB clock */
+	hab_caam_clock_enable(1);
+
+	u32 out_jr_size = sec_in32(CONFIG_SYS_FSL_JR0_ADDR +
+				   FSL_CAAM_ORSR_JRa_OFFSET);
+
+	if (out_jr_size != FSL_CAAM_MAX_JR_SIZE)
+		sec_init();
+
+	if (strcmp(sel, pubk) == 0) {
+		dst_ptr = malloc_cache_aligned(FSL_CAAM_MP_PUBK_BYTES);
+		if (!dst_ptr)
+			return -ENOMEM;
+
+		ret = gen_mppubk(dst_ptr);
+		if (ret) {
+			free(dst_ptr);
+			return ret;
+		}
+
+		/* Output results */
+		puts("Public key:\n");
+		for (i = 0; i < FSL_CAAM_MP_PUBK_BYTES; i++)
+			printf("%02X", (dst_ptr)[i]);
+		puts("\n");
+		free(dst_ptr);
+
+	} else if (strcmp(sel, sign) == 0) {
+		if (argc != 4)
+			return CMD_RET_USAGE;
+
+		m_addr = simple_strtoul(argv[2], NULL, 16);
+		m_size = simple_strtoul(argv[3], NULL, 10);
+		m_ptr = map_physmem(m_addr, m_size, MAP_NOCACHE);
+		if (!m_ptr)
+			return -ENOMEM;
+
+		dgst_ptr = malloc_cache_aligned(FSL_CAAM_MP_MES_DGST_BYTES);
+		if (!dgst_ptr) {
+			ret = -ENOMEM;
+			goto free_m;
+		}
+
+		c_ptr = malloc_cache_aligned(FSL_CAAM_MP_PRVK_BYTES);
+		if (!c_ptr) {
+			ret = -ENOMEM;
+			goto free_dgst;
+		}
+
+		d_ptr = malloc_cache_aligned(FSL_CAAM_MP_PRVK_BYTES);
+		if (!d_ptr) {
+			ret = -ENOMEM;
+			goto free_c;
+		}
+
+		ret = sign_mppubk(m_ptr, m_size, dgst_ptr, c_ptr, d_ptr);
+		if (ret)
+			goto free_d;
+
+		/* Output results */
+		puts("Message: ");
+		for (i = 0; i < m_size; i++)
+			printf("%02X ", (m_ptr)[i]);
+		puts("\n");
+
+		puts("Message Representative Digest(SHA-256):\n");
+		for (i = 0; i < FSL_CAAM_MP_MES_DGST_BYTES; i++)
+			printf("%02X", (dgst_ptr)[i]);
+		puts("\n");
+
+		puts("Signature:\n");
+		puts("C:\n");
+		for (i = 0; i < FSL_CAAM_MP_PRVK_BYTES; i++)
+			printf("%02X", (c_ptr)[i]);
+		puts("\n");
+
+		puts("d:\n");
+		for (i = 0; i < FSL_CAAM_MP_PRVK_BYTES; i++)
+			printf("%02X", (d_ptr)[i]);
+		puts("\n");
+free_d:
+	free(d_ptr);
+free_c:
+	free(c_ptr);
+free_dgst:
+	free(dgst_ptr);
+free_m:
+	unmap_sysmem(m_ptr);
+
+	} else {
+		return CMD_RET_USAGE;
+	}
+	return ret;
+}
+
+/***************************************************/
+static char mfgprot_help_text[] =
+	"Usage:\n"
+	 "Print the public key for Manufacturing Protection\n"
+	 "\tmfgprot pubk\n"
+	 "Generates a Manufacturing Protection signature\n"
+	 "\tmfgprot sign <data_addr> <size>";
+
+U_BOOT_CMD(
+	mfgprot, 4, 1, do_mfgprot,
+	"Manufacturing Protection\n",
+	mfgprot_help_text
+);
diff --git a/roms/u-boot/arch/arm/mach-imx/cmd_nandbcb.c b/roms/u-boot/arch/arm/mach-imx/cmd_nandbcb.c
new file mode 100644
index 000000000..7157c9e97
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/cmd_nandbcb.c
@@ -0,0 +1,1551 @@
+/*
+ * i.MX nand boot control block(bcb).
+ *
+ * Based on the common/imx-bbu-nand-fcb.c from barebox and imx kobs-ng
+ *
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ * Copyright (C) 2016 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Reconstucted by Han Xu <han.xu@nxp.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <log.h>
+#include <malloc.h>
+#include <nand.h>
+#include <dm/devres.h>
+#include <linux/bug.h>
+
+#include <asm/io.h>
+#include <jffs2/jffs2.h>
+#include <linux/bch.h>
+#include <linux/mtd/mtd.h>
+
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/imx-nandbcb.h>
+#include <asm/mach-imx/imximage.cfg>
+#include <mxs_nand.h>
+#include <linux/mtd/mtd.h>
+#include <nand.h>
+#include <fuse.h>
+
+#include "../../../cmd/legacy-mtd-utils.h"
+
+/* FCB related flags */
+/* FCB layout with leading 12B reserved */
+#define FCB_LAYOUT_RESV_12B		BIT(0)
+/* FCB layout with leading 32B meta data */
+#define FCB_LAYOUT_META_32B		BIT(1)
+/* FCB encrypted by Hamming code */
+#define FCB_ENCODE_HAMMING		BIT(2)
+/* FCB encrypted by 40bit BCH */
+#define FCB_ENCODE_BCH_40b		BIT(3)
+/* FCB encrypted by 62bit BCH */
+#define FCB_ENCODE_BCH_62b		BIT(4)
+/* FCB encrypted by BCH */
+#define FCB_ENCODE_BCH			(FCB_ENCODE_BCH_40b | FCB_ENCODE_BCH_62b)
+/* FCB data was randomized */
+#define FCB_RANDON_ENABLED		BIT(5)
+
+/* Firmware related flags */
+/* No 1K padding */
+#define FIRMWARE_NEED_PADDING		BIT(8)
+/* Extra firmware*/
+#define FIRMWARE_EXTRA_ONE		BIT(9)
+/* Secondary firmware on fixed address */
+#define FIRMWARE_SECONDARY_FIXED_ADDR	BIT(10)
+
+/* Boot search related flags */
+#define BT_SEARCH_CNT_FROM_FUSE		BIT(16)
+
+struct platform_config {
+	int misc_flags;
+};
+
+static struct platform_config plat_config;
+
+/* imx6q/dl/solo */
+static struct platform_config imx6qdl_plat_config = {
+	.misc_flags = FCB_LAYOUT_RESV_12B |
+		     FCB_ENCODE_HAMMING |
+		     FIRMWARE_NEED_PADDING,
+};
+
+static struct platform_config imx6sx_plat_config = {
+	.misc_flags = FCB_LAYOUT_META_32B |
+		     FCB_ENCODE_BCH_62b |
+		     FIRMWARE_NEED_PADDING |
+		     FCB_RANDON_ENABLED,
+};
+
+static struct platform_config imx7d_plat_config = {
+	.misc_flags = FCB_LAYOUT_META_32B |
+		     FCB_ENCODE_BCH_62b |
+		     FIRMWARE_NEED_PADDING |
+		     FCB_RANDON_ENABLED,
+};
+
+/* imx6ul/ull/ulz */
+static struct platform_config imx6ul_plat_config = {
+	.misc_flags = FCB_LAYOUT_META_32B |
+		     FCB_ENCODE_BCH_40b |
+		     FIRMWARE_NEED_PADDING,
+};
+
+static struct platform_config imx8mq_plat_config = {
+	.misc_flags = FCB_LAYOUT_META_32B |
+		     FCB_ENCODE_BCH_62b |
+		     FIRMWARE_NEED_PADDING |
+		     FCB_RANDON_ENABLED |
+		     FIRMWARE_EXTRA_ONE,
+};
+
+/* all other imx8mm */
+static struct platform_config imx8mm_plat_config = {
+	.misc_flags = FCB_LAYOUT_META_32B |
+		     FCB_ENCODE_BCH_62b |
+		     FIRMWARE_NEED_PADDING |
+		     FCB_RANDON_ENABLED,
+};
+
+/* imx8mn */
+static struct platform_config imx8mn_plat_config = {
+	.misc_flags = FCB_LAYOUT_META_32B |
+		     FCB_ENCODE_BCH_62b |
+		     FCB_RANDON_ENABLED |
+		     FIRMWARE_SECONDARY_FIXED_ADDR |
+		     BT_SEARCH_CNT_FROM_FUSE,
+};
+
+/* imx8qx/qm */
+static struct platform_config imx8q_plat_config = {
+	.misc_flags = FCB_LAYOUT_META_32B |
+		     FCB_ENCODE_BCH_62b |
+		     FCB_RANDON_ENABLED |
+		     FIRMWARE_SECONDARY_FIXED_ADDR |
+		     BT_SEARCH_CNT_FROM_FUSE,
+};
+
+/* boot search related variables and definitions */
+static int g_boot_search_count = 4;
+static int g_boot_search_stride;
+static int g_pages_per_stride;
+
+/* mtd config structure */
+struct boot_config {
+	int dev;
+	struct mtd_info *mtd;
+	loff_t maxsize;
+	loff_t input_size;
+	loff_t offset;
+	loff_t boot_stream1_address;
+	loff_t boot_stream2_address;
+	size_t boot_stream1_size;
+	size_t boot_stream2_size;
+	size_t max_boot_stream_size;
+	int stride_size_in_byte;
+	int search_area_size_in_bytes;
+	int search_area_size_in_pages;
+	int secondary_boot_stream_off_in_MB;
+};
+
+/* boot_stream config structure */
+struct boot_stream_config {
+	char bs_label[32];
+	loff_t bs_addr;
+	size_t bs_size;
+	void *bs_buf;
+	loff_t next_bs_addr;
+	bool need_padding;
+};
+
+/* FW index */
+#define FW1_ONLY	1
+#define FW2_ONLY	2
+#define FW_ALL		FW1_ONLY | FW2_ONLY
+#define FW_INX(x)	(1 << (x))
+
+/* NAND convert macros */
+#define CONV_TO_PAGES(x)	((u32)(x) / (u32)(mtd->writesize))
+#define CONV_TO_BLOCKS(x)	((u32)(x) / (u32)(mtd->erasesize))
+
+#define GETBIT(v, n)		(((v) >> (n)) & 0x1)
+#define IMX8MQ_SPL_SZ 0x3e000
+#define IMX8MQ_HDMI_FW_SZ 0x19c00
+
+static int nandbcb_get_info(int argc, char * const argv[],
+			    struct boot_config *boot_cfg)
+{
+	int dev;
+	struct mtd_info *mtd;
+
+	dev = nand_curr_device;
+	if (dev < 0) {
+		printf("failed to get nand_curr_device, run nand device\n");
+		return CMD_RET_FAILURE;
+	}
+
+	mtd = get_nand_dev_by_index(dev);
+	if (!mtd) {
+		printf("failed to get mtd info\n");
+		return CMD_RET_FAILURE;
+	}
+
+	boot_cfg->dev = dev;
+	boot_cfg->mtd = mtd;
+
+	return CMD_RET_SUCCESS;
+}
+
+static int nandbcb_get_size(int argc, char * const argv[], int num,
+			    struct boot_config *boot_cfg)
+{
+	int dev;
+	loff_t offset, size, maxsize;
+	struct mtd_info *mtd;
+
+	dev = boot_cfg->dev;
+	mtd = boot_cfg->mtd;
+	size = 0;
+
+	if (mtd_arg_off_size(argc - num, argv + num, &dev, &offset, &size,
+			     &maxsize, MTD_DEV_TYPE_NAND, mtd->size))
+		return CMD_RET_FAILURE;
+
+	boot_cfg->maxsize = maxsize;
+	boot_cfg->offset = offset;
+
+	debug("max: %llx, offset: %llx\n", maxsize, offset);
+
+	if (size && size != maxsize)
+		boot_cfg->input_size = size;
+
+	return CMD_RET_SUCCESS;
+}
+
+static int nandbcb_set_boot_config(int argc, char * const argv[],
+				   struct boot_config *boot_cfg)
+{
+	struct mtd_info *mtd;
+	loff_t maxsize;
+	loff_t boot_stream1_address, boot_stream2_address, max_boot_stream_size;
+
+	if (!boot_cfg->mtd) {
+		printf("Didn't get the mtd info, quit\n");
+		return CMD_RET_FAILURE;
+	}
+	mtd = boot_cfg->mtd;
+
+	/*
+	 * By default
+	 * set the search count as 4
+	 * set each FCB/DBBT/Firmware offset at the beginning of blocks
+	 * customers may change the value as needed
+	 */
+
+	/* if need more compact layout, change these values */
+	/* g_boot_search_count was set as 4 at the definition*/
+	/* g_pages_per_stride was set as block size */
+
+	g_pages_per_stride = mtd->erasesize / mtd->writesize;
+
+	g_boot_search_stride = mtd->writesize * g_pages_per_stride;
+
+	boot_cfg->stride_size_in_byte = g_boot_search_stride * mtd->writesize;
+	boot_cfg->search_area_size_in_bytes =
+		g_boot_search_count * g_boot_search_stride;
+	boot_cfg->search_area_size_in_pages =
+		boot_cfg->search_area_size_in_bytes / mtd->writesize;
+
+	/* after FCB/DBBT, split the rest of area for two Firmwares */
+	if (!boot_cfg->maxsize) {
+		printf("Didn't get the maxsize, quit\n");
+		return CMD_RET_FAILURE;
+	}
+	maxsize = boot_cfg->maxsize;
+	/* align to page boundary */
+	maxsize = ((u32)(maxsize + mtd->writesize - 1)) / (u32)mtd->writesize
+			* mtd->writesize;
+
+	boot_stream1_address = 2 * boot_cfg->search_area_size_in_bytes;
+	boot_stream2_address = ((maxsize - boot_stream1_address) / 2 +
+			       boot_stream1_address);
+
+	if (boot_cfg->secondary_boot_stream_off_in_MB)
+		boot_stream2_address =
+			(loff_t)boot_cfg->secondary_boot_stream_off_in_MB * 1024 * 1024;
+
+	max_boot_stream_size = boot_stream2_address - boot_stream1_address;
+
+	/* sanity check */
+	if (max_boot_stream_size <= 0) {
+		debug("st1_addr: %llx, st2_addr: %llx, max: %llx\n",
+		      boot_stream1_address, boot_stream2_address,
+		      max_boot_stream_size);
+		printf("something wrong with firmware address settings\n");
+		return CMD_RET_FAILURE;
+	}
+	boot_cfg->boot_stream1_address = boot_stream1_address;
+	boot_cfg->boot_stream2_address = boot_stream2_address;
+	boot_cfg->max_boot_stream_size = max_boot_stream_size;
+
+	/* set the boot_stream size as the input size now */
+	if (boot_cfg->input_size) {
+		boot_cfg->boot_stream1_size = boot_cfg->input_size;
+		boot_cfg->boot_stream2_size = boot_cfg->input_size;
+	}
+
+	return CMD_RET_SUCCESS;
+}
+
+static int nandbcb_check_space(struct boot_config *boot_cfg)
+{
+	size_t maxsize = boot_cfg->maxsize;
+	size_t max_boot_stream_size = boot_cfg->max_boot_stream_size;
+	loff_t boot_stream2_address = boot_cfg->boot_stream2_address;
+
+	if (boot_cfg->boot_stream1_size &&
+	    boot_cfg->boot_stream1_size > max_boot_stream_size) {
+		printf("boot stream1 doesn't fit, check partition size or settings\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if (boot_cfg->boot_stream2_size &&
+	    boot_cfg->boot_stream2_size > maxsize - boot_stream2_address) {
+		printf("boot stream2 doesn't fit, check partition size or settings\n");
+		return CMD_RET_FAILURE;
+	}
+
+	return CMD_RET_SUCCESS;
+}
+
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+static uint8_t reverse_bit(uint8_t b)
+{
+	b = (b & 0xf0) >> 4 | (b & 0x0f) << 4;
+	b = (b & 0xcc) >> 2 | (b & 0x33) << 2;
+	b = (b & 0xaa) >> 1 | (b & 0x55) << 1;
+
+	return b;
+}
+
+static void encode_bch_ecc(void *buf, struct fcb_block *fcb, int eccbits)
+{
+	int i, j, m = 13;
+	int blocksize = 128;
+	int numblocks = 8;
+	int ecc_buf_size = (m * eccbits + 7) / 8;
+	struct bch_control *bch = init_bch(m, eccbits, 0);
+	u8 *ecc_buf = kzalloc(ecc_buf_size, GFP_KERNEL);
+	u8 *tmp_buf = kzalloc(blocksize * numblocks, GFP_KERNEL);
+	u8 *psrc, *pdst;
+
+	/*
+	 * The blocks here are bit aligned. If eccbits is a multiple of 8,
+	 * we just can copy bytes. Otherwiese we must move the blocks to
+	 * the next free bit position.
+	 */
+	WARN_ON(eccbits % 8);
+
+	memcpy(tmp_buf, fcb, sizeof(*fcb));
+
+	for (i = 0; i < numblocks; i++) {
+		memset(ecc_buf, 0, ecc_buf_size);
+		psrc = tmp_buf + i * blocksize;
+		pdst = buf + i * (blocksize + ecc_buf_size);
+
+		/* copy data byte aligned to destination buf */
+		memcpy(pdst, psrc, blocksize);
+
+		/*
+		 * imx-kobs use a modified encode_bch which reverse the
+		 * bit order of the data before calculating bch.
+		 * Do this in the buffer and use the bch lib here.
+		 */
+		for (j = 0; j < blocksize; j++)
+			psrc[j] = reverse_bit(psrc[j]);
+
+		encode_bch(bch, psrc, blocksize, ecc_buf);
+
+		/* reverse ecc bit */
+		for (j = 0; j < ecc_buf_size; j++)
+			ecc_buf[j] = reverse_bit(ecc_buf[j]);
+
+		/* Here eccbuf is byte aligned and we can just copy it */
+		memcpy(pdst + blocksize, ecc_buf, ecc_buf_size);
+	}
+
+	kfree(ecc_buf);
+	kfree(tmp_buf);
+	free_bch(bch);
+}
+#else
+
+static u8 calculate_parity_13_8(u8 d)
+{
+	u8 p = 0;
+
+	p |= (GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 3) ^ GETBIT(d, 2)) << 0;
+	p |= (GETBIT(d, 7) ^ GETBIT(d, 5) ^ GETBIT(d, 4) ^ GETBIT(d, 2) ^
+	      GETBIT(d, 1)) << 1;
+	p |= (GETBIT(d, 7) ^ GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 1) ^
+	      GETBIT(d, 0)) << 2;
+	p |= (GETBIT(d, 7) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 0)) << 3;
+	p |= (GETBIT(d, 6) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 2) ^
+	      GETBIT(d, 1) ^ GETBIT(d, 0)) << 4;
+
+	return p;
+}
+
+static void encode_hamming_13_8(void *_src, void *_ecc, size_t size)
+{
+	int i;
+	u8 *src = _src;
+	u8 *ecc = _ecc;
+
+	for (i = 0; i < size; i++)
+		ecc[i] = calculate_parity_13_8(src[i]);
+}
+#endif
+
+static u32 calc_chksum(void *buf, size_t size)
+{
+	u32 chksum = 0;
+	u8 *bp = buf;
+	size_t i;
+
+	for (i = 0; i < size; i++)
+		chksum += bp[i];
+
+	return ~chksum;
+}
+
+static void fill_fcb(struct fcb_block *fcb, struct boot_config *boot_cfg)
+{
+	struct mtd_info *mtd = boot_cfg->mtd;
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
+	struct mxs_nand_layout l;
+
+	mxs_nand_get_layout(mtd, &l);
+
+	fcb->fingerprint = FCB_FINGERPRINT;
+	fcb->version = FCB_VERSION_1;
+
+	fcb->datasetup = 80;
+	fcb->datahold = 60;
+	fcb->addr_setup = 25;
+	fcb->dsample_time = 6;
+
+	fcb->pagesize = mtd->writesize;
+	fcb->oob_pagesize = mtd->writesize + mtd->oobsize;
+	fcb->sectors = mtd->erasesize / mtd->writesize;
+
+	fcb->meta_size = l.meta_size;
+	fcb->nr_blocks = l.nblocks;
+	fcb->ecc_nr = l.data0_size;
+	fcb->ecc_level = l.ecc0;
+	fcb->ecc_size = l.datan_size;
+	fcb->ecc_type = l.eccn;
+	fcb->bchtype = l.gf_len;
+
+	/* DBBT search area starts from the next block after all FCB */
+	fcb->dbbt_start = boot_cfg->search_area_size_in_pages;
+
+	fcb->bb_byte = nand_info->bch_geometry.block_mark_byte_offset;
+	fcb->bb_start_bit = nand_info->bch_geometry.block_mark_bit_offset;
+
+	fcb->phy_offset = mtd->writesize;
+
+	fcb->disbbm = 0;
+
+	fcb->fw1_start = CONV_TO_PAGES(boot_cfg->boot_stream1_address);
+	fcb->fw2_start = CONV_TO_PAGES(boot_cfg->boot_stream2_address);
+	fcb->fw1_pages = CONV_TO_PAGES(boot_cfg->boot_stream1_size);
+	fcb->fw2_pages = CONV_TO_PAGES(boot_cfg->boot_stream2_size);
+
+	fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
+}
+
+static int fill_dbbt_data(struct mtd_info *mtd, void *buf, int num_blocks)
+{
+	int n, n_bad_blocks = 0;
+	u32 *bb = buf + 0x8;
+	u32 *n_bad_blocksp = buf + 0x4;
+
+	for (n = 0; n < num_blocks; n++) {
+		loff_t offset = (loff_t)n * mtd->erasesize;
+			if (mtd_block_isbad(mtd, offset)) {
+				n_bad_blocks++;
+				*bb = n;
+				bb++;
+		}
+	}
+
+	*n_bad_blocksp = n_bad_blocks;
+
+	return n_bad_blocks;
+}
+
+/*
+ * return 1	- bad block
+ * return 0	- read successfully
+ * return < 0	- read failed
+ */
+static int read_fcb(struct boot_config *boot_cfg, struct fcb_block *fcb,
+		    loff_t off)
+{
+	struct mtd_info *mtd;
+	void *fcb_raw_page;
+	size_t size;
+	int ret = 0;
+
+	mtd = boot_cfg->mtd;
+	if (mtd_block_isbad(mtd, off)) {
+		printf("Block %d is bad, skipped\n", (int)CONV_TO_BLOCKS(off));
+		return 1;
+	}
+
+	fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
+	if (!fcb_raw_page) {
+		debug("failed to allocate fcb_raw_page\n");
+		ret = -ENOMEM;
+		return ret;
+	}
+
+	/*
+	 * User BCH hardware to decode ECC for FCB
+	 */
+	if (plat_config.misc_flags & FCB_ENCODE_BCH) {
+		size = sizeof(struct fcb_block);
+
+		/* switch nand BCH to FCB compatible settings */
+		if (plat_config.misc_flags & FCB_ENCODE_BCH_62b)
+			mxs_nand_mode_fcb_62bit(mtd);
+		else if (plat_config.misc_flags & FCB_ENCODE_BCH_40b)
+			mxs_nand_mode_fcb_40bit(mtd);
+
+		ret = nand_read(mtd, off, &size, (u_char *)fcb);
+
+		/* switch BCH back */
+		mxs_nand_mode_normal(mtd);
+		printf("NAND FCB read from 0x%llx offset 0x%zx read: %s\n",
+		       off, size, ret ? "ERROR" : "OK");
+
+	} else if (plat_config.misc_flags & FCB_ENCODE_HAMMING) {
+		/* raw read*/
+		mtd_oob_ops_t ops = {
+			.datbuf = (u8 *)fcb_raw_page,
+			.oobbuf = ((u8 *)fcb_raw_page) + mtd->writesize,
+			.len = mtd->writesize,
+			.ooblen = mtd->oobsize,
+			.mode = MTD_OPS_RAW
+			};
+
+		ret = mtd_read_oob(mtd, off, &ops);
+		printf("NAND FCB read from 0x%llx offset 0x%zx read: %s\n",
+		       off, ops.len, ret ? "ERROR" : "OK");
+	}
+
+	if (ret)
+		goto fcb_raw_page_err;
+
+	if ((plat_config.misc_flags & FCB_ENCODE_HAMMING) &&
+	    (plat_config.misc_flags & FCB_LAYOUT_RESV_12B))
+		memcpy(fcb, fcb_raw_page + 12, sizeof(struct fcb_block));
+
+/* TODO: check if it can pass Hamming check */
+
+fcb_raw_page_err:
+	kfree(fcb_raw_page);
+
+	return ret;
+}
+
+static int write_fcb(struct boot_config *boot_cfg, struct fcb_block *fcb)
+{
+	struct mtd_info *mtd;
+	void *fcb_raw_page = NULL;
+	int i, ret = 0;
+	loff_t off;
+	size_t size;
+
+	mtd = boot_cfg->mtd;
+
+	/*
+	 * We prepare raw page only for i.MX6, for i.MX7 we
+	 * leverage BCH hw module instead
+	 */
+	if ((plat_config.misc_flags & FCB_ENCODE_HAMMING) &&
+	    (plat_config.misc_flags & FCB_LAYOUT_RESV_12B)) {
+		fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize,
+				       GFP_KERNEL);
+		if (!fcb_raw_page) {
+			debug("failed to allocate fcb_raw_page\n");
+			ret = -ENOMEM;
+			return ret;
+		}
+
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+		/* 40 bit BCH, for i.MX6UL(L) */
+		encode_bch_ecc(fcb_raw_page + 32, fcb, 40);
+#else
+		memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
+		encode_hamming_13_8(fcb_raw_page + 12,
+				    fcb_raw_page + 12 + 512, 512);
+#endif
+		/*
+		 * Set the first and second byte of OOB data to 0xFF,
+		 * not 0x00. These bytes are used as the Manufacturers Bad
+		 * Block Marker (MBBM). Since the FCB is mostly written to
+		 * the first page in a block, a scan for
+		 * factory bad blocks will detect these blocks as bad, e.g.
+		 * when function nand_scan_bbt() is executed to build a new
+		 * bad block table.
+		 */
+		memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
+	}
+
+	/* start writing FCB from the very beginning */
+	off = 0;
+
+	for (i = 0; i < g_boot_search_count; i++) {
+		if (mtd_block_isbad(mtd, off)) {
+			printf("Block %d is bad, skipped\n", i);
+			continue;
+		}
+
+		/*
+		 * User BCH hardware module to generate ECC for FCB
+		 */
+		if (plat_config.misc_flags & FCB_ENCODE_BCH) {
+			size = sizeof(struct fcb_block);
+
+			/* switch nand BCH to FCB compatible settings */
+			if (plat_config.misc_flags & FCB_ENCODE_BCH_62b)
+				mxs_nand_mode_fcb_62bit(mtd);
+			else if (plat_config.misc_flags & FCB_ENCODE_BCH_40b)
+				mxs_nand_mode_fcb_40bit(mtd);
+
+			ret = nand_write(mtd, off, &size, (u_char *)fcb);
+
+			/* switch BCH back */
+			mxs_nand_mode_normal(mtd);
+			printf("NAND FCB write to 0x%zx offset 0x%llx written: %s\n",
+			       size, off, ret ? "ERROR" : "OK");
+
+		} else if (plat_config.misc_flags & FCB_ENCODE_HAMMING) {
+			/* raw write */
+			mtd_oob_ops_t ops = {
+				.datbuf = (u8 *)fcb_raw_page,
+				.oobbuf = ((u8 *)fcb_raw_page) +
+					  mtd->writesize,
+				.len = mtd->writesize,
+				.ooblen = mtd->oobsize,
+				.mode = MTD_OPS_RAW
+			};
+
+			ret = mtd_write_oob(mtd, off, &ops);
+			printf("NAND FCB write to 0x%llxx offset 0x%zx written: %s\n", off, ops.len, ret ? "ERROR" : "OK");
+		}
+
+		if (ret)
+			goto fcb_raw_page_err;
+
+		/* next writing location */
+		off += g_boot_search_stride;
+	}
+
+fcb_raw_page_err:
+	kfree(fcb_raw_page);
+
+	return ret;
+}
+
+/*
+ * return 1	- bad block
+ * return 0	- read successfully
+ * return < 0	- read failed
+ */
+static int read_dbbt(struct boot_config *boot_cfg, struct dbbt_block *dbbt,
+		      void *dbbt_data_page, loff_t off)
+{
+	size_t size;
+	struct mtd_info *mtd;
+	loff_t to;
+	int ret;
+
+	mtd = boot_cfg->mtd;
+
+	if (mtd_block_isbad(mtd, off)) {
+		printf("Block %d is bad, skipped\n",
+		       (int)CONV_TO_BLOCKS(off));
+		return 1;
+	}
+
+	size = sizeof(struct dbbt_block);
+	ret = nand_read(mtd, off, &size, (u_char *)dbbt);
+	printf("NAND DBBT read from 0x%llx offset 0x%zx read: %s\n",
+	       off, size, ret ? "ERROR" : "OK");
+	if (ret)
+		return ret;
+
+	/* dbbtpages == 0 if no bad blocks */
+	if (dbbt->dbbtpages > 0) {
+		to = off + 4 * mtd->writesize;
+		size = mtd->writesize;
+		ret = nand_read(mtd, to, &size, dbbt_data_page);
+		printf("DBBT data read from 0x%llx offset 0x%zx read: %s\n",
+		       to, size, ret ? "ERROR" : "OK");
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int write_dbbt(struct boot_config *boot_cfg, struct dbbt_block *dbbt,
+		      void *dbbt_data_page)
+{
+	int i;
+	loff_t off, to;
+	size_t size;
+	struct mtd_info *mtd;
+	int ret;
+
+	mtd = boot_cfg->mtd;
+
+	/* start writing DBBT after all FCBs */
+	off = boot_cfg->search_area_size_in_bytes;
+	size = mtd->writesize;
+
+	for (i = 0; i < g_boot_search_count; i++) {
+		if (mtd_block_isbad(mtd, off)) {
+			printf("Block %d is bad, skipped\n",
+			       (int)(i + CONV_TO_BLOCKS(off)));
+			continue;
+		}
+
+		ret = nand_write(mtd, off, &size, (u_char *)dbbt);
+		printf("NAND DBBT write to 0x%llx offset 0x%zx written: %s\n",
+		       off, size, ret ? "ERROR" : "OK");
+		if (ret)
+			return ret;
+
+		/* dbbtpages == 0 if no bad blocks */
+		if (dbbt->dbbtpages > 0) {
+			to = off + 4 * mtd->writesize;
+			ret = nand_write(mtd, to, &size, dbbt_data_page);
+			printf("DBBT data write to 0x%llx offset 0x%zx written: %s\n",
+			       to, size, ret ? "ERROR" : "OK");
+
+		if (ret)
+			return ret;
+		}
+
+		/* next writing location */
+		off += g_boot_search_stride;
+	}
+
+	return 0;
+}
+
+/* reuse the check_skip_len from nand_util.c with minor change*/
+static int check_skip_length(struct boot_config *boot_cfg, loff_t offset,
+			     size_t length, size_t *used)
+{
+	struct mtd_info *mtd = boot_cfg->mtd;
+	size_t maxsize = boot_cfg->maxsize;
+	size_t len_excl_bad = 0;
+	int ret = 0;
+
+	while (len_excl_bad < length) {
+		size_t block_len, block_off;
+		loff_t block_start;
+
+		if (offset >= maxsize)
+			return -1;
+
+		block_start = offset & ~(loff_t)(mtd->erasesize - 1);
+		block_off = offset & (mtd->erasesize - 1);
+		block_len = mtd->erasesize - block_off;
+
+		if (!nand_block_isbad(mtd, block_start))
+			len_excl_bad += block_len;
+		else
+			ret = 1;
+
+		offset += block_len;
+		*used += block_len;
+	}
+
+	/* If the length is not a multiple of block_len, adjust. */
+	if (len_excl_bad > length)
+		*used -= (len_excl_bad - length);
+
+	return ret;
+}
+
+static int nandbcb_get_next_good_blk_addr(struct boot_config *boot_cfg,
+					  struct boot_stream_config *bs_cfg)
+{
+	struct mtd_info *mtd = boot_cfg->mtd;
+	loff_t offset = bs_cfg->bs_addr;
+	size_t length = bs_cfg->bs_size;
+	size_t used = 0;
+	int ret;
+
+	ret = check_skip_length(boot_cfg, offset, length, &used);
+
+	if (ret < 0)
+		return ret;
+
+	/* get next image address */
+	bs_cfg->next_bs_addr = (u32)(offset + used + mtd->erasesize - 1)
+				 / (u32)mtd->erasesize * mtd->erasesize;
+
+	return ret;
+}
+
+static int nandbcb_write_bs_skip_bad(struct boot_config *boot_cfg,
+				     struct boot_stream_config *bs_cfg)
+{
+	struct mtd_info *mtd;
+	void *buf;
+	loff_t offset, maxsize;
+	size_t size;
+	size_t length;
+	int ret;
+	bool padding_flag = false;
+
+	mtd = boot_cfg->mtd;
+	offset = bs_cfg->bs_addr;
+	maxsize = boot_cfg->maxsize;
+	size = bs_cfg->bs_size;
+
+	/* some boot images may need leading offset */
+	if (bs_cfg->need_padding &&
+	    (plat_config.misc_flags & FIRMWARE_NEED_PADDING))
+		padding_flag = 1;
+
+	if (padding_flag)
+		length = ALIGN(size + FLASH_OFFSET_STANDARD, mtd->writesize);
+	else
+		length = ALIGN(size, mtd->writesize);
+
+	buf = kzalloc(length, GFP_KERNEL);
+	if (!buf) {
+		printf("failed to allocate buffer for firmware\n");
+		ret = -ENOMEM;
+		return ret;
+	}
+
+	if (padding_flag)
+		memcpy(buf + FLASH_OFFSET_STANDARD, bs_cfg->bs_buf, size);
+	else
+		memcpy(buf, bs_cfg->bs_buf, size);
+
+	ret = nand_write_skip_bad(mtd, offset, &length, NULL, maxsize,
+				  (u_char *)buf, WITH_WR_VERIFY);
+	printf("Write %s @0x%llx offset, 0x%zx bytes written: %s\n",
+	       bs_cfg->bs_label, offset, length, ret ? "ERROR" : "OK");
+
+	if (ret)
+		/* write image failed, quit */
+		goto err;
+
+	/* get next good blk address if needed */
+	if (bs_cfg->need_padding) {
+		ret = nandbcb_get_next_good_blk_addr(boot_cfg, bs_cfg);
+		if (ret < 0) {
+			printf("Next image cannot fit in NAND partition\n");
+			goto err;
+		}
+	}
+
+	/* now we know how the exact image size written to NAND */
+	bs_cfg->bs_size = length;
+	return 0;
+err:
+	kfree(buf);
+	return ret;
+}
+
+static int nandbcb_write_fw(struct boot_config *boot_cfg, u_char *buf,
+			    int index)
+{
+	int i;
+	loff_t offset;
+	size_t size;
+	loff_t next_bs_addr;
+	struct boot_stream_config bs_cfg;
+	int ret;
+
+	for (i = 0; i < 2; ++i) {
+		if (!(FW_INX(i) & index))
+			continue;
+
+		if (i == 0) {
+			offset = boot_cfg->boot_stream1_address;
+			size = boot_cfg->boot_stream1_size;
+		} else {
+			offset = boot_cfg->boot_stream2_address;
+			size = boot_cfg->boot_stream2_size;
+		}
+
+		/* write Firmware*/
+		if (!(plat_config.misc_flags & FIRMWARE_EXTRA_ONE)) {
+			memset(&bs_cfg, 0, sizeof(struct boot_stream_config));
+			sprintf(bs_cfg.bs_label, "firmware%d", i);
+			bs_cfg.bs_addr = offset;
+			bs_cfg.bs_size = size;
+			bs_cfg.bs_buf = buf;
+			bs_cfg.need_padding = 1;
+
+			ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg);
+			if (ret)
+				return ret;
+
+			/* update the boot stream size */
+			if (i == 0)
+				boot_cfg->boot_stream1_size = bs_cfg.bs_size;
+			else
+				boot_cfg->boot_stream2_size = bs_cfg.bs_size;
+
+		} else {
+		/* some platforms need extra firmware */
+			memset(&bs_cfg, 0, sizeof(struct boot_stream_config));
+			sprintf(bs_cfg.bs_label, "fw%d_part%d", i, 1);
+			bs_cfg.bs_addr = offset;
+			bs_cfg.bs_size = IMX8MQ_HDMI_FW_SZ;
+			bs_cfg.bs_buf = buf;
+			bs_cfg.need_padding = 1;
+
+			ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg);
+			if (ret)
+				return ret;
+
+			/* update the boot stream size */
+			if (i == 0)
+				boot_cfg->boot_stream1_size = bs_cfg.bs_size;
+			else
+				boot_cfg->boot_stream2_size = bs_cfg.bs_size;
+
+			/* get next image address */
+			next_bs_addr = bs_cfg.next_bs_addr;
+
+			memset(&bs_cfg, 0, sizeof(struct boot_stream_config));
+			sprintf(bs_cfg.bs_label, "fw%d_part%d", i, 2);
+			bs_cfg.bs_addr = next_bs_addr;
+			bs_cfg.bs_size = IMX8MQ_SPL_SZ;
+			bs_cfg.bs_buf = (u_char *)(buf + IMX8MQ_HDMI_FW_SZ);
+			bs_cfg.need_padding = 0;
+
+			ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int nandbcb_init(struct boot_config *boot_cfg, u_char *buf)
+{
+	struct mtd_info *mtd;
+	nand_erase_options_t opts;
+	struct fcb_block *fcb;
+	struct dbbt_block *dbbt;
+	void *dbbt_page, *dbbt_data_page;
+	int ret;
+	loff_t maxsize, off;
+
+	mtd = boot_cfg->mtd;
+	maxsize = boot_cfg->maxsize;
+	off = boot_cfg->offset;
+
+	/* erase */
+	memset(&opts, 0, sizeof(opts));
+	opts.offset = off;
+	opts.length = maxsize - 1;
+	ret = nand_erase_opts(mtd, &opts);
+	if (ret) {
+		printf("%s: erase failed (ret = %d)\n", __func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Reference documentation from i.MX6DQRM section 8.5.2.2
+	 *
+	 * Nand Boot Control Block(BCB) contains two data structures,
+	 * - Firmware Configuration Block(FCB)
+	 * - Discovered Bad Block Table(DBBT)
+	 *
+	 * FCB contains,
+	 * - nand timings
+	 * - DBBT search page address,
+	 * - start page address of primary firmware
+	 * - start page address of secondary firmware
+	 *
+	 * setup fcb:
+	 * - number of blocks = mtd partition size / mtd erasesize
+	 * - two firmware blocks, primary and secondary
+	 * - first 4 block for FCB/DBBT
+	 * - rest split in half for primary and secondary firmware
+	 * - same firmware write twice
+	 */
+
+	/* write Firmware*/
+	ret = nandbcb_write_fw(boot_cfg, buf, FW_ALL);
+	if (ret)
+		goto err;
+
+	/* fill fcb */
+	fcb = kzalloc(sizeof(*fcb), GFP_KERNEL);
+	if (!fcb) {
+		debug("failed to allocate fcb\n");
+		ret = -ENOMEM;
+		return ret;
+	}
+	fill_fcb(fcb, boot_cfg);
+
+	ret = write_fcb(boot_cfg, fcb);
+
+	/* fill dbbt */
+	dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL);
+	if (!dbbt_page) {
+		debug("failed to allocate dbbt_page\n");
+		ret = -ENOMEM;
+		goto fcb_err;
+	}
+
+	dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL);
+	if (!dbbt_data_page) {
+		debug("failed to allocate dbbt_data_page\n");
+		ret = -ENOMEM;
+		goto dbbt_page_err;
+	}
+
+	dbbt = dbbt_page;
+	dbbt->checksum = 0;
+	dbbt->fingerprint = DBBT_FINGERPRINT;
+	dbbt->version = DBBT_VERSION_1;
+	ret = fill_dbbt_data(mtd, dbbt_data_page, CONV_TO_BLOCKS(maxsize));
+	if (ret < 0)
+		goto dbbt_data_page_err;
+	else if (ret > 0)
+		dbbt->dbbtpages = 1;
+
+	/* write dbbt */
+	ret = write_dbbt(boot_cfg, dbbt, dbbt_data_page);
+	if (ret < 0)
+		printf("failed to write FCB/DBBT\n");
+
+dbbt_data_page_err:
+	kfree(dbbt_data_page);
+dbbt_page_err:
+	kfree(dbbt_page);
+fcb_err:
+	kfree(fcb);
+err:
+	return ret;
+}
+
+static int do_nandbcb_bcbonly(int argc, char *const argv[])
+{
+	struct fcb_block *fcb;
+	struct dbbt_block *dbbt;
+	struct mtd_info *mtd;
+	nand_erase_options_t opts;
+	size_t maxsize;
+	loff_t off;
+	void *dbbt_page, *dbbt_data_page;
+	int ret;
+	struct boot_config cfg;
+
+	if (argc < 4)
+		return CMD_RET_USAGE;
+
+	memset(&cfg, 0, sizeof(struct boot_config));
+	if (nandbcb_get_info(argc, argv, &cfg))
+		return CMD_RET_FAILURE;
+
+	/* only get the partition info */
+	if (nandbcb_get_size(2, argv, 1, &cfg))
+		return CMD_RET_FAILURE;
+
+	if (nandbcb_set_boot_config(argc, argv, &cfg))
+		return CMD_RET_FAILURE;
+
+	mtd = cfg.mtd;
+
+	cfg.boot_stream1_address = simple_strtoul(argv[2], NULL, 16);
+	cfg.boot_stream1_size = simple_strtoul(argv[3], NULL, 16);
+	cfg.boot_stream1_size = ALIGN(cfg.boot_stream1_size, mtd->writesize);
+
+	if (argc > 5) {
+		cfg.boot_stream2_address = simple_strtoul(argv[4], NULL, 16);
+		cfg.boot_stream2_size = simple_strtoul(argv[5], NULL, 16);
+		cfg.boot_stream2_size = ALIGN(cfg.boot_stream2_size,
+					      mtd->writesize);
+	}
+
+	/* sanity check */
+	nandbcb_check_space(&cfg);
+
+	maxsize = cfg.maxsize;
+	off = cfg.offset;
+
+	/* erase the previous FCB/DBBT */
+	memset(&opts, 0, sizeof(opts));
+	opts.offset = off;
+	opts.length = g_boot_search_stride * 2;
+	ret = nand_erase_opts(mtd, &opts);
+	if (ret) {
+		printf("%s: erase failed (ret = %d)\n", __func__, ret);
+		return CMD_RET_FAILURE;
+	}
+
+	/* fill fcb */
+	fcb = kzalloc(sizeof(*fcb), GFP_KERNEL);
+	if (!fcb) {
+		printf("failed to allocate fcb\n");
+		ret = -ENOMEM;
+		return CMD_RET_FAILURE;
+	}
+
+	fill_fcb(fcb, &cfg);
+
+	/* write fcb */
+	ret = write_fcb(&cfg, fcb);
+
+	/* fill dbbt */
+	dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL);
+	if (!dbbt_page) {
+		printf("failed to allocate dbbt_page\n");
+		ret = -ENOMEM;
+		goto fcb_err;
+	}
+
+	dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL);
+	if (!dbbt_data_page) {
+		printf("failed to allocate dbbt_data_page\n");
+		ret = -ENOMEM;
+		goto dbbt_page_err;
+	}
+
+	dbbt = dbbt_page;
+	dbbt->checksum = 0;
+	dbbt->fingerprint = DBBT_FINGERPRINT;
+	dbbt->version = DBBT_VERSION_1;
+	ret = fill_dbbt_data(mtd, dbbt_data_page, CONV_TO_BLOCKS(maxsize));
+	if (ret < 0)
+		goto dbbt_data_page_err;
+	else if (ret > 0)
+		dbbt->dbbtpages = 1;
+
+	/* write dbbt */
+	ret = write_dbbt(&cfg, dbbt, dbbt_data_page);
+
+dbbt_data_page_err:
+	kfree(dbbt_data_page);
+dbbt_page_err:
+	kfree(dbbt_page);
+fcb_err:
+	kfree(fcb);
+
+	if (ret < 0) {
+		printf("failed to write FCB/DBBT\n");
+		return CMD_RET_FAILURE;
+	}
+
+	return CMD_RET_SUCCESS;
+}
+
+/* dump data which is read from NAND chip */
+void dump_structure(struct boot_config *boot_cfg, struct fcb_block *fcb,
+		    struct dbbt_block *dbbt, void *dbbt_data_page)
+{
+	int i;
+	struct mtd_info *mtd = boot_cfg->mtd;
+
+	#define P1(x) printf("  %s = 0x%08x\n", #x, fcb->x)
+		printf("FCB\n");
+		P1(checksum);
+		P1(fingerprint);
+		P1(version);
+	#undef P1
+	#define P1(x)	printf("  %s = %d\n", #x, fcb->x)
+		P1(datasetup);
+		P1(datahold);
+		P1(addr_setup);
+		P1(dsample_time);
+		P1(pagesize);
+		P1(oob_pagesize);
+		P1(sectors);
+		P1(nr_nand);
+		P1(nr_die);
+		P1(celltype);
+		P1(ecc_type);
+		P1(ecc_nr);
+		P1(ecc_size);
+		P1(ecc_level);
+		P1(meta_size);
+		P1(nr_blocks);
+		P1(ecc_type_sdk);
+		P1(ecc_nr_sdk);
+		P1(ecc_size_sdk);
+		P1(ecc_level_sdk);
+		P1(nr_blocks_sdk);
+		P1(meta_size_sdk);
+		P1(erase_th);
+		P1(bootpatch);
+		P1(patch_size);
+		P1(fw1_start);
+		P1(fw2_start);
+		P1(fw1_pages);
+		P1(fw2_pages);
+		P1(dbbt_start);
+		P1(bb_byte);
+		P1(bb_start_bit);
+		P1(phy_offset);
+		P1(bchtype);
+		P1(readlatency);
+		P1(predelay);
+		P1(cedelay);
+		P1(postdelay);
+		P1(cmdaddpause);
+		P1(datapause);
+		P1(tmspeed);
+		P1(busytimeout);
+		P1(disbbm);
+		P1(spare_offset);
+#if !defined(CONFIG_MX6) || defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+		P1(onfi_sync_enable);
+		P1(onfi_sync_speed);
+		P1(onfi_sync_nand_data);
+		P1(disbbm_search);
+		P1(disbbm_search_limit);
+		P1(read_retry_enable);
+#endif
+	#undef P1
+	#define P1(x)	printf("  %s = 0x%08x\n", #x, dbbt->x)
+		printf("DBBT :\n");
+		P1(checksum);
+		P1(fingerprint);
+		P1(version);
+	#undef P1
+	#define P1(x)	printf("  %s = %d\n", #x, dbbt->x)
+		P1(dbbtpages);
+	#undef P1
+
+	for (i = 0; i < dbbt->dbbtpages; ++i)
+		printf("%d ", *((u32 *)(dbbt_data_page + i)));
+
+	if (!(plat_config.misc_flags & FIRMWARE_EXTRA_ONE)) {
+		printf("Firmware: image #0 @ 0x%x size 0x%x\n",
+		       fcb->fw1_start, fcb->fw1_pages * mtd->writesize);
+		printf("Firmware: image #1 @ 0x%x size 0x%x\n",
+		       fcb->fw2_start, fcb->fw2_pages * mtd->writesize);
+	} else {
+		printf("Firmware: image #0 @ 0x%x size 0x%x\n",
+		       fcb->fw1_start, fcb->fw1_pages * mtd->writesize);
+		printf("Firmware: image #1 @ 0x%x size 0x%x\n",
+		       fcb->fw2_start, fcb->fw2_pages * mtd->writesize);
+		/* TODO: Add extra image information */
+	}
+}
+
+static bool check_fingerprint(void *data, int fingerprint)
+{
+	int off = 4;
+
+	return (*(int *)(data + off) == fingerprint);
+}
+
+static int fuse_to_search_count(u32 bank, u32 word, u32 mask, u32 off)
+{
+	int err;
+	u32 val;
+	int ret;
+
+	/* by default, the boot search count from fuse should be 2 */
+	err = fuse_read(bank, word, &val);
+	if (err)
+		return 2;
+
+	val = (val & mask) >> off;
+
+	switch (val) {
+		case 0:
+			ret = 2;
+			break;
+		case 1:
+		case 2:
+		case 3:
+			ret = 1 << val;
+			break;
+		default:
+			ret = 2;
+	}
+
+	return ret;
+}
+
+static int nandbcb_dump(struct boot_config *boot_cfg)
+{
+	int i;
+	loff_t off;
+	struct mtd_info *mtd = boot_cfg->mtd;
+	struct fcb_block fcb, fcb_copy;
+	struct dbbt_block dbbt, dbbt_copy;
+	void *dbbt_data_page, *dbbt_data_page_copy;
+	bool fcb_not_found, dbbt_not_found;
+	int ret = 0;
+
+	dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL);
+	if (!dbbt_data_page) {
+		printf("failed to allocate dbbt_data_page\n");
+		ret = -ENOMEM;
+		return ret;
+	}
+
+	dbbt_data_page_copy = kzalloc(mtd->writesize, GFP_KERNEL);
+	if (!dbbt_data_page_copy) {
+		printf("failed to allocate dbbt_data_page\n");
+		ret = -ENOMEM;
+		goto dbbt_page_err;
+	}
+
+	/* read fcb */
+	fcb_not_found = 1;
+	off = 0;
+	for (i = 0; i < g_boot_search_count; ++i) {
+		if (fcb_not_found) {
+			ret = read_fcb(boot_cfg, &fcb, off);
+
+			if (ret < 0)
+				goto dbbt_page_copy_err;
+			else if (ret == 1)
+				continue;
+			else if (ret == 0)
+				if (check_fingerprint(&fcb, FCB_FINGERPRINT))
+					fcb_not_found = 0;
+		} else {
+			ret = read_fcb(boot_cfg, &fcb_copy, off);
+
+			if (ret < 0)
+				goto dbbt_page_copy_err;
+			if (memcmp(&fcb, &fcb_copy,
+				   sizeof(struct fcb_block))) {
+				printf("FCB copies are not identical\n");
+				ret = -EINVAL;
+				goto dbbt_page_copy_err;
+			}
+		}
+
+		/* next read location */
+		off += g_boot_search_stride;
+	}
+
+	/* read dbbt*/
+	dbbt_not_found = 1;
+	off = boot_cfg->search_area_size_in_bytes;
+	for (i = 0; i < g_boot_search_count; ++i) {
+		if (dbbt_not_found) {
+			ret = read_dbbt(boot_cfg, &dbbt, dbbt_data_page, off);
+
+			if (ret < 0)
+				goto dbbt_page_copy_err;
+			else if (ret == 1)
+				continue;
+			else if (ret == 0)
+				if (check_fingerprint(&dbbt, DBBT_FINGERPRINT))
+					dbbt_not_found = 0;
+		} else {
+			ret = read_dbbt(boot_cfg, &dbbt_copy,
+					dbbt_data_page_copy, off);
+
+			if (ret < 0)
+				goto dbbt_page_copy_err;
+			if (memcmp(&dbbt, &dbbt_copy,
+				   sizeof(struct dbbt_block))) {
+				printf("DBBT copies are not identical\n");
+				ret = -EINVAL;
+				goto dbbt_page_copy_err;
+			}
+			if (dbbt.dbbtpages > 0 &&
+			    memcmp(dbbt_data_page, dbbt_data_page_copy,
+				   mtd->writesize)) {
+				printf("DBBT data copies are not identical\n");
+				ret = -EINVAL;
+				goto dbbt_page_copy_err;
+			}
+		}
+
+		/* next read location */
+		off += g_boot_search_stride;
+	}
+
+	dump_structure(boot_cfg, &fcb, &dbbt, dbbt_data_page);
+
+dbbt_page_copy_err:
+	kfree(dbbt_data_page_copy);
+dbbt_page_err:
+	kfree(dbbt_data_page);
+
+	return ret;
+}
+
+static int do_nandbcb_dump(int argc, char * const argv[])
+{
+	struct boot_config cfg;
+	int ret;
+
+	if (argc != 2)
+		return CMD_RET_USAGE;
+
+	memset(&cfg, 0, sizeof(struct boot_config));
+	if (nandbcb_get_info(argc, argv, &cfg))
+		return CMD_RET_FAILURE;
+
+	if (nandbcb_get_size(argc, argv, 1, &cfg))
+		return CMD_RET_FAILURE;
+
+	if (nandbcb_set_boot_config(argc, argv, &cfg))
+		return CMD_RET_FAILURE;
+
+	ret = nandbcb_dump(&cfg);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static int do_nandbcb_init(int argc, char * const argv[])
+{
+	u_char *buf;
+	size_t size;
+	loff_t addr;
+	char *endp;
+	int ret;
+	struct boot_config cfg;
+
+	if (argc != 4)
+		return CMD_RET_USAGE;
+
+	memset(&cfg, 0, sizeof(struct boot_config));
+	if (nandbcb_get_info(argc, argv, &cfg))
+		return CMD_RET_FAILURE;
+
+	if (nandbcb_get_size(argc, argv, 2, &cfg))
+		return CMD_RET_FAILURE;
+	size = cfg.boot_stream1_size;
+
+	if (nandbcb_set_boot_config(argc, argv, &cfg))
+		return CMD_RET_FAILURE;
+
+	addr = simple_strtoul(argv[1], &endp, 16);
+	if (*argv[1] == 0 || *endp != 0)
+		return CMD_RET_FAILURE;
+
+	buf = map_physmem(addr, size, MAP_WRBACK);
+	if (!buf) {
+		puts("failed to map physical memory\n");
+		return CMD_RET_FAILURE;
+	}
+
+	ret = nandbcb_init(&cfg, buf);
+
+	return ret == 0 ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
+}
+
+static int do_nandbcb(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	const char *cmd;
+	int ret = 0;
+
+	if (argc < 3)
+		goto usage;
+
+	/* check the platform config first */
+	if (is_mx6sx()) {
+		plat_config = imx6sx_plat_config;
+	} else if (is_mx7()) {
+		plat_config = imx7d_plat_config;
+	} else if (is_mx6ul() || is_mx6ull()) {
+		plat_config = imx6ul_plat_config;
+	} else if (is_mx6() && !is_mx6sx() && !is_mx6ul() && !is_mx6ull()) {
+		plat_config = imx6qdl_plat_config;
+	} else if (is_imx8mq()) {
+		plat_config = imx8mq_plat_config;
+	} else if (is_imx8mm()) {
+		plat_config = imx8mm_plat_config;
+	} else if (is_imx8mn() || is_imx8mp()) {
+		plat_config = imx8mn_plat_config;
+	} else if (is_imx8qm() || is_imx8qxp()) {
+		plat_config = imx8q_plat_config;
+	} else {
+		printf("ERROR: Unknown platform\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if ((plat_config.misc_flags) & BT_SEARCH_CNT_FROM_FUSE) {
+		if (is_imx8qxp())
+			g_boot_search_count = fuse_to_search_count(0, 720, 0xc0, 6);
+		if (is_imx8mn() || is_imx8mp())
+			g_boot_search_count = fuse_to_search_count(2, 2, 0x6000, 13);
+		printf("search count set to %d from fuse\n",
+		       g_boot_search_count);
+	}
+
+	cmd = argv[1];
+	--argc;
+	++argv;
+
+	if (strcmp(cmd, "init") == 0) {
+		ret = do_nandbcb_init(argc, argv);
+		goto done;
+	}
+
+	if (strcmp(cmd, "dump") == 0) {
+		ret = do_nandbcb_dump(argc, argv);
+		goto done;
+	}
+
+	if (strcmp(cmd, "bcbonly") == 0) {
+		ret = do_nandbcb_bcbonly(argc, argv);
+		goto done;
+	}
+
+done:
+	if (ret != -1)
+		return ret;
+usage:
+	return CMD_RET_USAGE;
+}
+
+#ifdef CONFIG_SYS_LONGHELP
+static char nandbcb_help_text[] =
+	"init addr off|partition len - update 'len' bytes starting at\n"
+	"       'off|part' to memory address 'addr', skipping  bad blocks\n"
+	"nandbcb bcbonly off|partition fw1-off fw1-size [fw2-off fw2-size]\n"
+	"	    - write BCB only (FCB and DBBT)\n"
+	"       where `fwx-size` is fw sizes in bytes, `fw1-off`\n"
+	"       and `fw2-off` - firmware offsets\n"
+	"       FIY, BCB isn't erased automatically, so mtd erase should\n"
+	"       be called in advance before writing new BCB:\n"
+	"           > mtd erase mx7-bcb\n"
+	"nandbcb dump off|partition - dump/verify boot structures\n";
+#endif
+
+U_BOOT_CMD(nandbcb, 7, 1, do_nandbcb,
+	   "i.MX NAND Boot Control Blocks write",
+	   nandbcb_help_text
+);
diff --git a/roms/u-boot/arch/arm/mach-imx/cpu.c b/roms/u-boot/arch/arm/mach-imx/cpu.c
new file mode 100644
index 000000000..423b71535
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/cpu.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#include <bootm.h>
+#include <common.h>
+#include <dm.h>
+#include <init.h>
+#include <log.h>
+#include <net.h>
+#include <netdev.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <imx_thermal.h>
+#include <ipu_pixfmt.h>
+#include <thermal.h>
+#include <sata.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+#include <fsl_esdhc_imx.h>
+#endif
+
+static u32 reset_cause = -1;
+
+u32 get_imx_reset_cause(void)
+{
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+
+	if (reset_cause == -1) {
+		reset_cause = readl(&src_regs->srsr);
+/* preserve the value for U-Boot proper */
+#if !defined(CONFIG_SPL_BUILD)
+		writel(reset_cause, &src_regs->srsr);
+#endif
+	}
+
+	return reset_cause;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD)
+static char *get_reset_cause(void)
+{
+	switch (get_imx_reset_cause()) {
+	case 0x00001:
+	case 0x00011:
+		return "POR";
+	case 0x00004:
+		return "CSU";
+	case 0x00008:
+		return "IPP USER";
+	case 0x00010:
+#ifdef	CONFIG_MX7
+		return "WDOG1";
+#else
+		return "WDOG";
+#endif
+	case 0x00020:
+		return "JTAG HIGH-Z";
+	case 0x00040:
+		return "JTAG SW";
+	case 0x00080:
+		return "WDOG3";
+#ifdef CONFIG_MX7
+	case 0x00100:
+		return "WDOG4";
+	case 0x00200:
+		return "TEMPSENSE";
+#elif defined(CONFIG_IMX8M)
+	case 0x00100:
+		return "WDOG2";
+	case 0x00200:
+		return "TEMPSENSE";
+#else
+	case 0x00100:
+		return "TEMPSENSE";
+	case 0x10000:
+		return "WARM BOOT";
+#endif
+	default:
+		return "unknown reset";
+	}
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD)
+
+const char *get_imx_type(u32 imxtype)
+{
+	switch (imxtype) {
+	case MXC_CPU_IMX8MP:
+		return "8MP[8]";	/* Quad-core version of the imx8mp */
+	case MXC_CPU_IMX8MPD:
+		return "8MP Dual[3]";	/* Dual-core version of the imx8mp */
+	case MXC_CPU_IMX8MPL:
+		return "8MP Lite[4]";	/* Quad-core Lite version of the imx8mp */
+	case MXC_CPU_IMX8MP6:
+		return "8MP[6]";	/* Quad-core version of the imx8mp, NPU fused */
+	case MXC_CPU_IMX8MN:
+		return "8MNano Quad"; /* Quad-core version */
+	case MXC_CPU_IMX8MND:
+		return "8MNano Dual"; /* Dual-core version */
+	case MXC_CPU_IMX8MNS:
+		return "8MNano Solo"; /* Single-core version */
+	case MXC_CPU_IMX8MNL:
+		return "8MNano QuadLite"; /* Quad-core Lite version */
+	case MXC_CPU_IMX8MNDL:
+		return "8MNano DualLite"; /* Dual-core Lite version */
+	case MXC_CPU_IMX8MNSL:
+		return "8MNano SoloLite";/* Single-core Lite version of the imx8mn */
+	case MXC_CPU_IMX8MNUQ:
+		return "8MNano UltraLite Quad";/* Quad-core UltraLite version of the imx8mn */
+	case MXC_CPU_IMX8MNUD:
+		return "8MNano UltraLite Dual";/* Dual-core UltraLite version of the imx8mn */
+	case MXC_CPU_IMX8MNUS:
+		return "8MNano UltraLite Solo";/* Single-core UltraLite version of the imx8mn */
+	case MXC_CPU_IMX8MM:
+		return "8MMQ";	/* Quad-core version of the imx8mm */
+	case MXC_CPU_IMX8MML:
+		return "8MMQL";	/* Quad-core Lite version of the imx8mm */
+	case MXC_CPU_IMX8MMD:
+		return "8MMD";	/* Dual-core version of the imx8mm */
+	case MXC_CPU_IMX8MMDL:
+		return "8MMDL";	/* Dual-core Lite version of the imx8mm */
+	case MXC_CPU_IMX8MMS:
+		return "8MMS";	/* Single-core version of the imx8mm */
+	case MXC_CPU_IMX8MMSL:
+		return "8MMSL";	/* Single-core Lite version of the imx8mm */
+	case MXC_CPU_IMX8MQ:
+		return "8MQ";	/* Quad-core version of the imx8mq */
+	case MXC_CPU_IMX8MQL:
+		return "8MQLite";	/* Quad-core Lite version of the imx8mq */
+	case MXC_CPU_IMX8MD:
+		return "8MD";	/* Dual-core version of the imx8mq */
+	case MXC_CPU_MX7S:
+		return "7S";	/* Single-core version of the mx7 */
+	case MXC_CPU_MX7D:
+		return "7D";	/* Dual-core version of the mx7 */
+	case MXC_CPU_MX6QP:
+		return "6QP";	/* Quad-Plus version of the mx6 */
+	case MXC_CPU_MX6DP:
+		return "6DP";	/* Dual-Plus version of the mx6 */
+	case MXC_CPU_MX6Q:
+		return "6Q";	/* Quad-core version of the mx6 */
+	case MXC_CPU_MX6D:
+		return "6D";	/* Dual-core version of the mx6 */
+	case MXC_CPU_MX6DL:
+		return "6DL";	/* Dual Lite version of the mx6 */
+	case MXC_CPU_MX6SOLO:
+		return "6SOLO";	/* Solo version of the mx6 */
+	case MXC_CPU_MX6SL:
+		return "6SL";	/* Solo-Lite version of the mx6 */
+	case MXC_CPU_MX6SLL:
+		return "6SLL";	/* SLL version of the mx6 */
+	case MXC_CPU_MX6SX:
+		return "6SX";   /* SoloX version of the mx6 */
+	case MXC_CPU_MX6UL:
+		return "6UL";   /* Ultra-Lite version of the mx6 */
+	case MXC_CPU_MX6ULL:
+		return "6ULL";	/* ULL version of the mx6 */
+	case MXC_CPU_MX6ULZ:
+		return "6ULZ";	/* ULZ version of the mx6 */
+	case MXC_CPU_MX51:
+		return "51";
+	case MXC_CPU_MX53:
+		return "53";
+	default:
+		return "??";
+	}
+}
+
+int print_cpuinfo(void)
+{
+	u32 cpurev;
+	__maybe_unused u32 max_freq;
+
+	cpurev = get_cpu_rev();
+
+#if defined(CONFIG_IMX_THERMAL) || defined(CONFIG_IMX_TMU)
+	struct udevice *thermal_dev;
+	int cpu_tmp, minc, maxc, ret;
+
+	printf("CPU:   Freescale i.MX%s rev%d.%d",
+	       get_imx_type((cpurev & 0x1FF000) >> 12),
+	       (cpurev & 0x000F0) >> 4,
+	       (cpurev & 0x0000F) >> 0);
+	max_freq = get_cpu_speed_grade_hz();
+	if (!max_freq || max_freq == mxc_get_clock(MXC_ARM_CLK)) {
+		printf(" at %dMHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	} else {
+		printf(" %d MHz (running at %d MHz)\n", max_freq / 1000000,
+		       mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	}
+#else
+	printf("CPU:   Freescale i.MX%s rev%d.%d at %d MHz\n",
+		get_imx_type((cpurev & 0x1FF000) >> 12),
+		(cpurev & 0x000F0) >> 4,
+		(cpurev & 0x0000F) >> 0,
+		mxc_get_clock(MXC_ARM_CLK) / 1000000);
+#endif
+
+#if defined(CONFIG_IMX_THERMAL) || defined(CONFIG_IMX_TMU)
+	puts("CPU:   ");
+	switch (get_cpu_temp_grade(&minc, &maxc)) {
+	case TEMP_AUTOMOTIVE:
+		puts("Automotive temperature grade ");
+		break;
+	case TEMP_INDUSTRIAL:
+		puts("Industrial temperature grade ");
+		break;
+	case TEMP_EXTCOMMERCIAL:
+		puts("Extended Commercial temperature grade ");
+		break;
+	default:
+		puts("Commercial temperature grade ");
+		break;
+	}
+	printf("(%dC to %dC)", minc, maxc);
+	ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev);
+	if (!ret) {
+		ret = thermal_get_temp(thermal_dev, &cpu_tmp);
+
+		if (!ret)
+			printf(" at %dC", cpu_tmp);
+		else
+			debug(" - invalid sensor data\n");
+	} else {
+		debug(" - invalid sensor device\n");
+	}
+	puts("\n");
+#endif
+
+	printf("Reset cause: %s\n", get_reset_cause());
+	return 0;
+}
+#endif
+
+int cpu_eth_init(struct bd_info *bis)
+{
+	int rc = -ENODEV;
+
+#if defined(CONFIG_FEC_MXC)
+	rc = fecmxc_initialize(bis);
+#endif
+
+	return rc;
+}
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(struct bd_info *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+#if !(defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
+u32 get_ahb_clk(void)
+{
+	struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 reg, ahb_podf;
+
+	reg = __raw_readl(&imx_ccm->cbcdr);
+	reg &= MXC_CCM_CBCDR_AHB_PODF_MASK;
+	ahb_podf = reg >> MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+
+	return get_periph_clk() / (ahb_podf + 1);
+}
+#endif
+
+void arch_preboot_os(void)
+{
+#if defined(CONFIG_PCIE_IMX) && !CONFIG_IS_ENABLED(DM_PCI)
+	imx_pcie_remove();
+#endif
+
+#if defined(CONFIG_IMX_AHCI)
+	struct udevice *dev;
+	int rc;
+
+	rc = uclass_find_device(UCLASS_AHCI, 0, &dev);
+	if (!rc && dev) {
+		rc = device_remove(dev, DM_REMOVE_NORMAL);
+		if (rc)
+			printf("Cannot remove SATA device '%s' (err=%d)\n",
+				dev->name, rc);
+	}
+#endif
+
+#if defined(CONFIG_SATA)
+	if (!is_mx6sdl()) {
+		sata_remove(0);
+#if defined(CONFIG_MX6)
+		disable_sata_clock();
+#endif
+	}
+#endif
+#if defined(CONFIG_VIDEO_IPUV3)
+	/* disable video before launching O/S */
+	ipuv3_fb_shutdown();
+#endif
+#if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_DM_VIDEO)
+	lcdif_power_down();
+#endif
+}
+
+#ifndef CONFIG_IMX8M
+void set_chipselect_size(int const cs_size)
+{
+	unsigned int reg;
+	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	reg = readl(&iomuxc_regs->gpr[1]);
+
+	switch (cs_size) {
+	case CS0_128:
+		reg &= ~0x7;	/* CS0=128MB, CS1=0, CS2=0, CS3=0 */
+		reg |= 0x5;
+		break;
+	case CS0_64M_CS1_64M:
+		reg &= ~0x3F;	/* CS0=64MB, CS1=64MB, CS2=0, CS3=0 */
+		reg |= 0x1B;
+		break;
+	case CS0_64M_CS1_32M_CS2_32M:
+		reg &= ~0x1FF;	/* CS0=64MB, CS1=32MB, CS2=32MB, CS3=0 */
+		reg |= 0x4B;
+		break;
+	case CS0_32M_CS1_32M_CS2_32M_CS3_32M:
+		reg &= ~0xFFF;  /* CS0=32MB, CS1=32MB, CS2=32MB, CS3=32MB */
+		reg |= 0x249;
+		break;
+	default:
+		printf("Unknown chip select size: %d\n", cs_size);
+		break;
+	}
+
+	writel(reg, &iomuxc_regs->gpr[1]);
+}
+#endif
+
+#if defined(CONFIG_MX7) || defined(CONFIG_IMX8M)
+/*
+ * OCOTP_TESTER3[9:8] (see Fusemap Description Table offset 0x440)
+ * defines a 2-bit SPEED_GRADING
+ */
+#define OCOTP_TESTER3_SPEED_SHIFT	8
+enum cpu_speed {
+	OCOTP_TESTER3_SPEED_GRADE0,
+	OCOTP_TESTER3_SPEED_GRADE1,
+	OCOTP_TESTER3_SPEED_GRADE2,
+	OCOTP_TESTER3_SPEED_GRADE3,
+	OCOTP_TESTER3_SPEED_GRADE4,
+};
+
+u32 get_cpu_speed_grade_hz(void)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	uint32_t val;
+
+	val = readl(&fuse->tester3);
+	val >>= OCOTP_TESTER3_SPEED_SHIFT;
+
+	if (is_imx8mn() || is_imx8mp()) {
+		val &= 0xf;
+		return 2300000000 - val * 100000000;
+	}
+
+	if (is_imx8mm())
+		val &= 0x7;
+	else
+		val &= 0x3;
+
+	switch(val) {
+	case OCOTP_TESTER3_SPEED_GRADE0:
+		return 800000000;
+	case OCOTP_TESTER3_SPEED_GRADE1:
+		return (is_mx7() ? 500000000 : (is_imx8mq() ? 1000000000 : 1200000000));
+	case OCOTP_TESTER3_SPEED_GRADE2:
+		return (is_mx7() ? 1000000000 : (is_imx8mq() ? 1300000000 : 1600000000));
+	case OCOTP_TESTER3_SPEED_GRADE3:
+		return (is_mx7() ? 1200000000 : (is_imx8mq() ? 1500000000 : 1800000000));
+	case OCOTP_TESTER3_SPEED_GRADE4:
+		return 2000000000;
+	}
+
+	return 0;
+}
+
+/*
+ * OCOTP_TESTER3[7:6] (see Fusemap Description Table offset 0x440)
+ * defines a 2-bit SPEED_GRADING
+ */
+#define OCOTP_TESTER3_TEMP_SHIFT	6
+
+/* iMX8MP uses OCOTP_TESTER3[6:5] for Market segment */
+#define IMX8MP_OCOTP_TESTER3_TEMP_SHIFT	5
+
+u32 get_cpu_temp_grade(int *minc, int *maxc)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	uint32_t val;
+
+	val = readl(&fuse->tester3);
+	if (is_imx8mp())
+		val >>= IMX8MP_OCOTP_TESTER3_TEMP_SHIFT;
+	else
+		val >>= OCOTP_TESTER3_TEMP_SHIFT;
+	val &= 0x3;
+
+	if (minc && maxc) {
+		if (val == TEMP_AUTOMOTIVE) {
+			*minc = -40;
+			*maxc = 125;
+		} else if (val == TEMP_INDUSTRIAL) {
+			*minc = -40;
+			*maxc = 105;
+		} else if (val == TEMP_EXTCOMMERCIAL) {
+			*minc = -20;
+			*maxc = 105;
+		} else {
+			*minc = 0;
+			*maxc = 95;
+		}
+	}
+	return val;
+}
+#endif
+
+#if defined(CONFIG_MX7) || defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM)
+enum boot_device get_boot_device(void)
+{
+	struct bootrom_sw_info **p =
+		(struct bootrom_sw_info **)(ulong)ROM_SW_INFO_ADDR;
+
+	enum boot_device boot_dev = SD1_BOOT;
+	u8 boot_type = (*p)->boot_dev_type;
+	u8 boot_instance = (*p)->boot_dev_instance;
+
+	switch (boot_type) {
+	case BOOT_TYPE_SD:
+		boot_dev = boot_instance + SD1_BOOT;
+		break;
+	case BOOT_TYPE_MMC:
+		boot_dev = boot_instance + MMC1_BOOT;
+		break;
+	case BOOT_TYPE_NAND:
+		boot_dev = NAND_BOOT;
+		break;
+	case BOOT_TYPE_QSPI:
+		boot_dev = QSPI_BOOT;
+		break;
+	case BOOT_TYPE_WEIM:
+		boot_dev = WEIM_NOR_BOOT;
+		break;
+	case BOOT_TYPE_SPINOR:
+		boot_dev = SPI_NOR_BOOT;
+		break;
+	case BOOT_TYPE_USB:
+		boot_dev = USB_BOOT;
+		break;
+	default:
+#ifdef CONFIG_IMX8M
+		if (((readl(SRC_BASE_ADDR + 0x58) & 0x00007FFF) >> 12) == 0x4)
+			boot_dev = QSPI_BOOT;
+#endif
+		break;
+	}
+
+	return boot_dev;
+}
+#endif
+
+#ifdef CONFIG_NXP_BOARD_REVISION
+int nxp_board_rev(void)
+{
+	/*
+	 * Get Board ID information from OCOTP_GP1[15:8]
+	 * RevA: 0x1
+	 * RevB: 0x2
+	 * RevC: 0x3
+	 */
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[4];
+	struct fuse_bank4_regs *fuse =
+			(struct fuse_bank4_regs *)bank->fuse_regs;
+
+	return (readl(&fuse->gp1) >> 8 & 0x0F);
+}
+
+char nxp_board_rev_string(void)
+{
+	const char *rev = "A";
+
+	return (*rev + nxp_board_rev() - 1);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610-calibration.c b/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610-calibration.c
new file mode 100644
index 000000000..cd7e95e61
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610-calibration.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ddrmc DDR3 calibration code for NXP's VF610
+ *
+ * Copyright (C) 2018 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ */
+/* #define DEBUG */
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <linux/bitmap.h>
+
+#include "ddrmc-vf610-calibration.h"
+
+/*
+ * Documents:
+ *
+ * [1] "Vybrid: About DDR leveling feature on DDRMC."
+ * https://community.nxp.com/thread/395323
+ *
+ * [2] VFxxx Controller Reference Manual, Rev. 0, 10/2016
+ *
+ *
+ * NOTE
+ * ====
+ *
+ * NXP recommends setting 'fixed' parameters instead of performing the
+ * training at each boot.
+ *
+ * Use those functions to determine those values on new HW, read the
+ * calculated value from registers and add them to the board specific
+ * struct ddrmc_cr_setting.
+ *
+ * SW leveling supported operations - CR93[SW_LVL_MODE]:
+ *
+ * - 0x0 (b'00) - No leveling
+ *
+ * - 0x1 (b'01) - WRLVL_DL_X - It is not recommended to perform this tuning
+ *                             on HW designs utilizing non-flyback topology
+ *                             (Single DDR3 with x16).
+ *                             Instead the WRLVL_DL_0/1 fields shall be set
+ *                             based on trace length differences from their
+ *                             layout.
+ *                             Mismatches up to 25% or tCK (clock period) are
+ *                             allowed, so the value in the filed doesn’t have
+ *                             to be very accurate.
+ *
+ * - 0x2 (b'10) - RDLVL_DL_0/1 - refers to adjusting the DQS strobe in relation
+ *                             to the DQ signals so that the strobe edge is
+ *                             centered in the window of valid read data.
+ *
+ * - 0x3 (b'11) - RDLVL_GTDL_0/1 - refers to the delay the PHY uses to un-gate
+ *                             the Read DQS strobe pad from the time that the
+ *                             PHY enables the pad to input the strobe signal.
+ *
+ */
+static int ddr_cal_get_first_edge_index(unsigned long *bmap, enum edge e,
+					int samples, int start, int max)
+{
+	int i, ret = -1;
+
+	/*
+	 * We look only for the first value (and filter out
+	 * some wrong data)
+	 */
+	switch (e) {
+	case RISING_EDGE:
+		for (i = start; i <= max - samples; i++) {
+			if (test_bit(i, bmap)) {
+				if (!test_bit(i - 1, bmap) &&
+				    test_bit(i + 1, bmap) &&
+				    test_bit(i + 2, bmap) &&
+				    test_bit(i + 3, bmap)) {
+					return i;
+				}
+			}
+		}
+		break;
+	case FALLING_EDGE:
+		for (i = start; i <= max - samples; i++) {
+			if (!test_bit(i, bmap)) {
+				if (test_bit(i - 1, bmap) &&
+				    test_bit(i - 2, bmap) &&
+				    test_bit(i - 3, bmap)) {
+					return i;
+				}
+			}
+		}
+	}
+
+	return ret;
+}
+
+static void bitmap_print(unsigned long *bmap, int max)
+{
+	int i;
+
+	debug("BITMAP [0x%p]:\n", bmap);
+	for (i = 0; i <= max; i++) {
+		debug("%d ", test_bit(i, bmap) ? 1 : 0);
+		if (i && (i % 32) == (32 - 1))
+			debug("\n");
+	}
+	debug("\n");
+}
+
+#define sw_leveling_op_done \
+	while (!(readl(&ddrmr->cr[94]) & DDRMC_CR94_SWLVL_OP_DONE))
+
+#define sw_leveling_load_value \
+	do { clrsetbits_le32(&ddrmr->cr[93], DDRMC_CR93_SWLVL_LOAD, \
+			     DDRMC_CR93_SWLVL_LOAD); } while (0)
+
+#define sw_leveling_start \
+	do { clrsetbits_le32(&ddrmr->cr[93], DDRMC_CR93_SWLVL_START, \
+			     DDRMC_CR93_SWLVL_START); } while (0)
+
+#define sw_leveling_exit \
+	do { clrsetbits_le32(&ddrmr->cr[94], DDRMC_CR94_SWLVL_EXIT, \
+			     DDRMC_CR94_SWLVL_EXIT); } while (0)
+
+/*
+ * RDLVL_DL calibration:
+ *
+ * NXP is _NOT_ recommending performing the leveling at each
+ * boot. Instead - one shall run this procedure on new boards
+ * and then use hardcoded values.
+ *
+ */
+static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr)
+{
+	DECLARE_BITMAP(rdlvl_rsp, DDRMC_DQS_DQ_MAX_DELAY + 1);
+	int rdlvl_dl_0_min = -1, rdlvl_dl_0_max = -1;
+	int rdlvl_dl_1_min = -1, rdlvl_dl_1_max = -1;
+	int rdlvl_dl_0, rdlvl_dl_1;
+	u8 swlvl_rsp;
+	u32 tmp;
+	int i;
+
+	/* Read defaults */
+	u16 rdlvl_dl_0_def =
+		(readl(&ddrmr->cr[105]) >> DDRMC_CR105_RDLVL_DL_0_OFF) & 0xFFFF;
+	u16 rdlvl_dl_1_def = readl(&ddrmr->cr[110]) & 0xFFFF;
+
+	debug("\nRDLVL: ======================\n");
+	debug("RDLVL: DQS to DQ (RDLVL)\n");
+
+	debug("RDLVL: RDLVL_DL_0_DFL:\t 0x%x\n", rdlvl_dl_0_def);
+	debug("RDLVL: RDLVL_DL_1_DFL:\t 0x%x\n", rdlvl_dl_1_def);
+
+	/*
+	 * Set/Read setup for calibration
+	 *
+	 * Values necessary for leveling from Vybrid RM [2] - page 1600
+	 */
+	writel(0x40703030, &ddrmr->cr[144]);
+	writel(0x40, &ddrmr->cr[145]);
+	writel(0x40, &ddrmr->cr[146]);
+
+	tmp = readl(&ddrmr->cr[144]);
+	debug("RDLVL: PHY_RDLVL_RES:\t 0x%x\n", (tmp >> 24) & 0xFF);// set 0x40
+	debug("RDLVL: PHY_RDLV_LOAD:\t 0x%x\n", (tmp >> 16) & 0xFF);// set 0x70
+	debug("RDLVL: PHY_RDLV_DLL:\t 0x%x\n", (tmp >> 8) & 0xFF); // set 0x30
+	debug("RDLVL: PHY_RDLV_EN:\t 0x%x\n", tmp & 0xFF); //set 0x30
+
+	tmp = readl(&ddrmr->cr[145]);
+	debug("RDLVL: PHY_RDLV_RR:\t 0x%x\n", tmp & 0x3FF); //set 0x40
+
+	tmp = readl(&ddrmr->cr[146]);
+	debug("RDLVL: PHY_RDLV_RESP:\t 0x%x\n", tmp); //set 0x40
+
+	/*
+	 * Program/read the leveling edge RDLVL_EDGE = 0
+	 *
+	 * 0x00 is the correct output on SWLVL_RSP_X
+	 * If by any chance 1s are visible -> wrong number read
+	 */
+	clrbits_le32(&ddrmr->cr[101], DDRMC_CR101_PHY_RDLVL_EDGE);
+
+	tmp = readl(&ddrmr->cr[101]);
+	debug("RDLVL: PHY_RDLVL_EDGE:\t 0x%x\n",
+	      (tmp >> DDRMC_CR101_PHY_RDLVL_EDGE_OFF) & 0x1); //set 0
+
+	/* Program Leveling mode - CR93[SW_LVL_MODE] to ’b10 */
+	clrsetbits_le32(&ddrmr->cr[93], DDRMC_CR93_SW_LVL_MODE(0x3),
+			DDRMC_CR93_SW_LVL_MODE(0x2));
+	tmp = readl(&ddrmr->cr[93]);
+	debug("RDLVL: SW_LVL_MODE:\t 0x%x\n",
+	      (tmp >> DDRMC_CR93_SW_LVL_MODE_OFF) & 0x3);
+
+	/* Start procedure - CR93[SWLVL_START] to ’b1 */
+	sw_leveling_start;
+
+	/* Poll CR94[SWLVL_OP_DONE] */
+	sw_leveling_op_done;
+
+	/*
+	 * Program delays for RDLVL_DL_0
+	 *
+	 * The procedure is to increase the delay values from 0 to 0xFF
+	 * and read the response from the DDRMC
+	 */
+	debug("\nRDLVL: ---> RDLVL_DL_0\n");
+	bitmap_zero(rdlvl_rsp, DDRMC_DQS_DQ_MAX_DELAY + 1);
+
+	for (i = 0; i <= DDRMC_DQS_DQ_MAX_DELAY; i++) {
+		clrsetbits_le32(&ddrmr->cr[105],
+				0xFFFF << DDRMC_CR105_RDLVL_DL_0_OFF,
+				i << DDRMC_CR105_RDLVL_DL_0_OFF);
+
+		/* Load values CR93[SWLVL_LOAD] to ’b1 */
+		sw_leveling_load_value;
+
+		/* Poll CR94[SWLVL_OP_DONE] */
+		sw_leveling_op_done;
+
+		/*
+		 * Read Responses - SWLVL_RESP_0
+		 *
+		 * The 0x00 (correct response when PHY_RDLVL_EDGE = 0)
+		 * -> 1 in the bit vector
+		 */
+		swlvl_rsp = (readl(&ddrmr->cr[94]) >>
+			     DDRMC_CR94_SWLVL_RESP_0_OFF) & 0xF;
+		if (swlvl_rsp == 0)
+			generic_set_bit(i, rdlvl_rsp);
+	}
+
+	bitmap_print(rdlvl_rsp, DDRMC_DQS_DQ_MAX_DELAY);
+
+	/*
+	 * First test for rising edge 0x0 -> 0x1 in bitmap
+	 */
+	rdlvl_dl_0_min = ddr_cal_get_first_edge_index(rdlvl_rsp, RISING_EDGE,
+						      N_SAMPLES, N_SAMPLES,
+						      DDRMC_DQS_DQ_MAX_DELAY);
+
+	/*
+	 * Secondly test for falling edge 0x1 -> 0x0 in bitmap
+	 */
+	rdlvl_dl_0_max = ddr_cal_get_first_edge_index(rdlvl_rsp, FALLING_EDGE,
+						      N_SAMPLES, rdlvl_dl_0_min,
+						      DDRMC_DQS_DQ_MAX_DELAY);
+
+	debug("RDLVL: DL_0 min: %d [0x%x] DL_0 max: %d [0x%x]\n",
+	      rdlvl_dl_0_min, rdlvl_dl_0_min, rdlvl_dl_0_max, rdlvl_dl_0_max);
+	rdlvl_dl_0 = (rdlvl_dl_0_max - rdlvl_dl_0_min) / 2;
+
+	if (rdlvl_dl_0_max == -1 || rdlvl_dl_0_min == -1 || rdlvl_dl_0 <= 0) {
+		debug("RDLVL: The DQS to DQ delay cannot be found!\n");
+		debug("RDLVL: Using default - slice 0: %d!\n", rdlvl_dl_0_def);
+		rdlvl_dl_0 = rdlvl_dl_0_def;
+	}
+
+	debug("\nRDLVL: ---> RDLVL_DL_1\n");
+	bitmap_zero(rdlvl_rsp, DDRMC_DQS_DQ_MAX_DELAY + 1);
+
+	for (i = 0; i <= DDRMC_DQS_DQ_MAX_DELAY; i++) {
+		clrsetbits_le32(&ddrmr->cr[110],
+				0xFFFF << DDRMC_CR110_RDLVL_DL_1_OFF,
+				i << DDRMC_CR110_RDLVL_DL_1_OFF);
+
+		/* Load values CR93[SWLVL_LOAD] to ’b1 */
+		sw_leveling_load_value;
+
+		/* Poll CR94[SWLVL_OP_DONE] */
+		sw_leveling_op_done;
+
+		/*
+		 * Read Responses - SWLVL_RESP_1
+		 *
+		 * The 0x00 (correct response when PHY_RDLVL_EDGE = 0)
+		 * -> 1 in the bit vector
+		 */
+		swlvl_rsp = (readl(&ddrmr->cr[95]) >>
+			     DDRMC_CR95_SWLVL_RESP_1_OFF) & 0xF;
+		if (swlvl_rsp == 0)
+			generic_set_bit(i, rdlvl_rsp);
+	}
+
+	bitmap_print(rdlvl_rsp, DDRMC_DQS_DQ_MAX_DELAY);
+
+	/*
+	 * First test for rising edge 0x0 -> 0x1 in bitmap
+	 */
+	rdlvl_dl_1_min = ddr_cal_get_first_edge_index(rdlvl_rsp, RISING_EDGE,
+						      N_SAMPLES, N_SAMPLES,
+						      DDRMC_DQS_DQ_MAX_DELAY);
+
+	/*
+	 * Secondly test for falling edge 0x1 -> 0x0 in bitmap
+	 */
+	rdlvl_dl_1_max = ddr_cal_get_first_edge_index(rdlvl_rsp, FALLING_EDGE,
+						      N_SAMPLES, rdlvl_dl_1_min,
+						      DDRMC_DQS_DQ_MAX_DELAY);
+
+	debug("RDLVL: DL_1 min: %d [0x%x] DL_1 max: %d [0x%x]\n",
+	      rdlvl_dl_1_min, rdlvl_dl_1_min, rdlvl_dl_1_max, rdlvl_dl_1_max);
+	rdlvl_dl_1 = (rdlvl_dl_1_max - rdlvl_dl_1_min) / 2;
+
+	if (rdlvl_dl_1_max == -1 || rdlvl_dl_1_min == -1 || rdlvl_dl_1 <= 0) {
+		debug("RDLVL: The DQS to DQ delay cannot be found!\n");
+		debug("RDLVL: Using default - slice 1: %d!\n", rdlvl_dl_1_def);
+		rdlvl_dl_1 = rdlvl_dl_1_def;
+	}
+
+	debug("RDLVL: CALIBRATED: rdlvl_dl_0: 0x%x\t rdlvl_dl_1: 0x%x\n",
+	      rdlvl_dl_0, rdlvl_dl_1);
+
+	/* Write new delay values */
+	writel(DDRMC_CR105_RDLVL_DL_0(rdlvl_dl_0), &ddrmr->cr[105]);
+	writel(DDRMC_CR110_RDLVL_DL_1(rdlvl_dl_1), &ddrmr->cr[110]);
+
+	sw_leveling_load_value;
+	sw_leveling_op_done;
+
+	/* Exit procedure - CR94[SWLVL_EXIT] to ’b1 */
+	sw_leveling_exit;
+
+	/* Poll CR94[SWLVL_OP_DONE] */
+	sw_leveling_op_done;
+
+	return 0;
+}
+
+/*
+ * WRLVL_DL calibration:
+ *
+ * For non-flyback memory architecture - where one have a single DDR3 x16
+ * memory - it is NOT necessary to perform "Write Leveling"
+ * [3] 'Vybrid DDR3 write leveling' https://community.nxp.com/thread/429362
+ *
+ */
+
+int ddrmc_calibration(struct ddrmr_regs *ddrmr)
+{
+	ddrmc_cal_dqs_to_dq(ddrmr);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610-calibration.h b/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610-calibration.h
new file mode 100644
index 000000000..e82e217ab
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610-calibration.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ddrmc DDR3 calibration code for NXP's VF610
+ *
+ * Copyright (C) 2018 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ */
+
+#ifndef __DDRMC_VF610_CALIBRATOIN_H_
+#define __DDRMC_VF610_CALIBRATOIN_H_
+
+/*
+ * Number of "samples" in the calibration bitmap
+ * to be considered during calibration.
+ */
+#define N_SAMPLES 3
+
+/*
+ * Constants to indicate if we are looking for a rising or
+ * falling edge in the calibration bitmap
+ */
+enum edge {
+	FALLING_EDGE = 1,
+	RISING_EDGE
+};
+
+/*
+ * The max number of delay elements when DQS to DQ setting
+ */
+#define DDRMC_DQS_DQ_MAX_DELAY 0xFF
+
+/**
+ * ddrmc_calibration - Vybrid's (VF610) DDR3 calibration code
+ *
+ * This function is calculating proper memory controller values
+ * during run time.
+ *
+ * @param ddrmr_regs - memory controller registers
+ *
+ * @return 0 on success, otherwise error code
+ */
+int ddrmc_calibration(struct ddrmr_regs *ddrmr);
+
+#endif /* __DDRMC_VF610_CALIBRATOIN_H_ */
diff --git a/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610.c b/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610.c
new file mode 100644
index 000000000..7895ee66f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/ddrmc-vf610.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 Toradex, Inc.
+ *
+ * Based on vf610twr:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-vf610.h>
+#include <asm/arch/ddrmc-vf610.h>
+#include <linux/delay.h>
+#include "ddrmc-vf610-calibration.h"
+
+void ddrmc_setup_iomux(const iomux_v3_cfg_t *pads, int pads_count)
+{
+	static const iomux_v3_cfg_t default_pads[] = {
+		VF610_PAD_DDR_A15__DDR_A_15,
+		VF610_PAD_DDR_A14__DDR_A_14,
+		VF610_PAD_DDR_A13__DDR_A_13,
+		VF610_PAD_DDR_A12__DDR_A_12,
+		VF610_PAD_DDR_A11__DDR_A_11,
+		VF610_PAD_DDR_A10__DDR_A_10,
+		VF610_PAD_DDR_A9__DDR_A_9,
+		VF610_PAD_DDR_A8__DDR_A_8,
+		VF610_PAD_DDR_A7__DDR_A_7,
+		VF610_PAD_DDR_A6__DDR_A_6,
+		VF610_PAD_DDR_A5__DDR_A_5,
+		VF610_PAD_DDR_A4__DDR_A_4,
+		VF610_PAD_DDR_A3__DDR_A_3,
+		VF610_PAD_DDR_A2__DDR_A_2,
+		VF610_PAD_DDR_A1__DDR_A_1,
+		VF610_PAD_DDR_A0__DDR_A_0,
+		VF610_PAD_DDR_BA2__DDR_BA_2,
+		VF610_PAD_DDR_BA1__DDR_BA_1,
+		VF610_PAD_DDR_BA0__DDR_BA_0,
+		VF610_PAD_DDR_CAS__DDR_CAS_B,
+		VF610_PAD_DDR_CKE__DDR_CKE_0,
+		VF610_PAD_DDR_CLK__DDR_CLK_0,
+		VF610_PAD_DDR_CS__DDR_CS_B_0,
+		VF610_PAD_DDR_D15__DDR_D_15,
+		VF610_PAD_DDR_D14__DDR_D_14,
+		VF610_PAD_DDR_D13__DDR_D_13,
+		VF610_PAD_DDR_D12__DDR_D_12,
+		VF610_PAD_DDR_D11__DDR_D_11,
+		VF610_PAD_DDR_D10__DDR_D_10,
+		VF610_PAD_DDR_D9__DDR_D_9,
+		VF610_PAD_DDR_D8__DDR_D_8,
+		VF610_PAD_DDR_D7__DDR_D_7,
+		VF610_PAD_DDR_D6__DDR_D_6,
+		VF610_PAD_DDR_D5__DDR_D_5,
+		VF610_PAD_DDR_D4__DDR_D_4,
+		VF610_PAD_DDR_D3__DDR_D_3,
+		VF610_PAD_DDR_D2__DDR_D_2,
+		VF610_PAD_DDR_D1__DDR_D_1,
+		VF610_PAD_DDR_D0__DDR_D_0,
+		VF610_PAD_DDR_DQM1__DDR_DQM_1,
+		VF610_PAD_DDR_DQM0__DDR_DQM_0,
+		VF610_PAD_DDR_DQS1__DDR_DQS_1,
+		VF610_PAD_DDR_DQS0__DDR_DQS_0,
+		VF610_PAD_DDR_RAS__DDR_RAS_B,
+		VF610_PAD_DDR_WE__DDR_WE_B,
+		VF610_PAD_DDR_ODT1__DDR_ODT_0,
+		VF610_PAD_DDR_ODT0__DDR_ODT_1,
+		VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1,
+		VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2,
+		VF610_PAD_DDR_RESETB,
+	};
+
+	if ((pads == NULL) || (pads_count == 0)) {
+		pads = default_pads;
+		pads_count = ARRAY_SIZE(default_pads);
+	}
+
+	imx_iomux_v3_setup_multiple_pads(pads, pads_count);
+}
+
+static struct ddrmc_phy_setting default_phy_settings[] = {
+	{ DDRMC_PHY_DQ_TIMING,  0 },
+	{ DDRMC_PHY_DQ_TIMING, 16 },
+	{ DDRMC_PHY_DQ_TIMING, 32 },
+
+	{ DDRMC_PHY_DQS_TIMING,  1 },
+	{ DDRMC_PHY_DQS_TIMING, 17 },
+
+	{ DDRMC_PHY_CTRL,  2 },
+	{ DDRMC_PHY_CTRL, 18 },
+	{ DDRMC_PHY_CTRL, 34 },
+
+	{ DDRMC_PHY_MASTER_CTRL,  3 },
+	{ DDRMC_PHY_MASTER_CTRL, 19 },
+	{ DDRMC_PHY_MASTER_CTRL, 35 },
+
+	{ DDRMC_PHY_SLAVE_CTRL,  4 },
+	{ DDRMC_PHY_SLAVE_CTRL, 20 },
+	{ DDRMC_PHY_SLAVE_CTRL, 36 },
+
+	/* LPDDR2 only parameter */
+	{ DDRMC_PHY_OFF, 49 },
+
+	{ DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE, 50 },
+
+	/* Processor Pad ODT settings */
+	{ DDRMC_PHY_PROC_PAD_ODT, 52 },
+
+	/* end marker */
+	{ 0, -1 }
+};
+
+void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
+			  struct ddrmc_cr_setting *board_cr_settings,
+			  struct ddrmc_phy_setting *board_phy_settings,
+			  int col_diff, int row_diff)
+{
+	struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR;
+	struct ddrmc_cr_setting *cr_setting;
+	struct ddrmc_phy_setting *phy_setting;
+
+	writel(DDRMC_CR00_DRAM_CLASS_DDR3, &ddrmr->cr[0]);
+	writel(DDRMC_CR02_DRAM_TINIT(timings->tinit), &ddrmr->cr[2]);
+	writel(DDRMC_CR10_TRST_PWRON(timings->trst_pwron), &ddrmr->cr[10]);
+
+	writel(DDRMC_CR11_CKE_INACTIVE(timings->cke_inactive), &ddrmr->cr[11]);
+	writel(DDRMC_CR12_WRLAT(timings->wrlat) |
+		   DDRMC_CR12_CASLAT_LIN(timings->caslat_lin), &ddrmr->cr[12]);
+	writel(DDRMC_CR13_TRC(timings->trc) | DDRMC_CR13_TRRD(timings->trrd) |
+		   DDRMC_CR13_TCCD(timings->tccd) |
+		   DDRMC_CR13_TBST_INT_INTERVAL(timings->tbst_int_interval),
+		   &ddrmr->cr[13]);
+	writel(DDRMC_CR14_TFAW(timings->tfaw) | DDRMC_CR14_TRP(timings->trp) |
+		   DDRMC_CR14_TWTR(timings->twtr) |
+		   DDRMC_CR14_TRAS_MIN(timings->tras_min), &ddrmr->cr[14]);
+	writel(DDRMC_CR16_TMRD(timings->tmrd) |
+		   DDRMC_CR16_TRTP(timings->trtp), &ddrmr->cr[16]);
+	writel(DDRMC_CR17_TRAS_MAX(timings->tras_max) |
+		   DDRMC_CR17_TMOD(timings->tmod), &ddrmr->cr[17]);
+	writel(DDRMC_CR18_TCKESR(timings->tckesr) |
+		   DDRMC_CR18_TCKE(timings->tcke), &ddrmr->cr[18]);
+
+	writel(DDRMC_CR20_AP_EN, &ddrmr->cr[20]);
+	writel(DDRMC_CR21_TRCD_INT(timings->trcd_int) | DDRMC_CR21_CCMAP_EN |
+		   DDRMC_CR21_TRAS_LOCKOUT(timings->tras_lockout),
+		   &ddrmr->cr[21]);
+
+	writel(DDRMC_CR22_TDAL(timings->tdal), &ddrmr->cr[22]);
+	writel(DDRMC_CR23_BSTLEN(timings->bstlen) |
+		   DDRMC_CR23_TDLL(timings->tdll), &ddrmr->cr[23]);
+	writel(DDRMC_CR24_TRP_AB(timings->trp_ab), &ddrmr->cr[24]);
+
+	writel(DDRMC_CR25_TREF_EN, &ddrmr->cr[25]);
+	writel(DDRMC_CR26_TREF(timings->tref) |
+		   DDRMC_CR26_TRFC(timings->trfc), &ddrmr->cr[26]);
+	writel(DDRMC_CR28_TREF_INT(timings->tref_int), &ddrmr->cr[28]);
+	writel(DDRMC_CR29_TPDEX(timings->tpdex), &ddrmr->cr[29]);
+
+	writel(DDRMC_CR30_TXPDLL(timings->txpdll), &ddrmr->cr[30]);
+	writel(DDRMC_CR31_TXSNR(timings->txsnr) |
+		   DDRMC_CR31_TXSR(timings->txsr), &ddrmr->cr[31]);
+	writel(DDRMC_CR33_EN_QK_SREF, &ddrmr->cr[33]);
+	writel(DDRMC_CR34_CKSRX(timings->cksrx) |
+		   DDRMC_CR34_CKSRE(timings->cksre), &ddrmr->cr[34]);
+
+	writel(DDRMC_CR38_FREQ_CHG_EN(timings->freq_chg_en), &ddrmr->cr[38]);
+	writel(DDRMC_CR39_PHY_INI_COM(1024) | DDRMC_CR39_PHY_INI_STA(16) |
+		   DDRMC_CR39_FRQ_CH_DLLOFF(2), &ddrmr->cr[39]);
+
+	writel(DDRMC_CR41_PHY_INI_STRT_INI_DIS, &ddrmr->cr[41]);
+	writel(DDRMC_CR48_MR1_DA_0(70) |
+		   DDRMC_CR48_MR0_DA_0(1056), &ddrmr->cr[48]);
+
+	writel(DDRMC_CR66_ZQCL(timings->zqcl) |
+		   DDRMC_CR66_ZQINIT(timings->zqinit), &ddrmr->cr[66]);
+	writel(DDRMC_CR67_ZQCS(timings->zqcs), &ddrmr->cr[67]);
+	writel(DDRMC_CR69_ZQ_ON_SREF_EX(2), &ddrmr->cr[69]);
+
+	writel(DDRMC_CR70_REF_PER_ZQ(timings->ref_per_zq), &ddrmr->cr[70]);
+	writel(DDRMC_CR72_ZQCS_ROTATE(timings->zqcs_rotate), &ddrmr->cr[72]);
+
+	writel(DDRMC_CR73_APREBIT(timings->aprebit) |
+		   DDRMC_CR73_COL_DIFF(col_diff) |
+		   DDRMC_CR73_ROW_DIFF(row_diff), &ddrmr->cr[73]);
+	writel(DDRMC_CR74_BANKSPLT_EN | DDRMC_CR74_ADDR_CMP_EN |
+		   DDRMC_CR74_CMD_AGE_CNT(timings->cmd_age_cnt) |
+		   DDRMC_CR74_AGE_CNT(timings->age_cnt),
+		   &ddrmr->cr[74]);
+	writel(DDRMC_CR75_RW_PG_EN | DDRMC_CR75_RW_EN | DDRMC_CR75_PRI_EN |
+		   DDRMC_CR75_PLEN, &ddrmr->cr[75]);
+	writel(DDRMC_CR76_NQENT_ACTDIS(3) | DDRMC_CR76_D_RW_G_BKCN(3) |
+		   DDRMC_CR76_W2R_SPLT_EN, &ddrmr->cr[76]);
+	writel(DDRMC_CR77_CS_MAP | DDRMC_CR77_DI_RD_INTLEAVE |
+		   DDRMC_CR77_SWAP_EN, &ddrmr->cr[77]);
+	writel(DDRMC_CR78_Q_FULLNESS(timings->q_fullness) |
+		   DDRMC_CR78_BUR_ON_FLY_BIT(12), &ddrmr->cr[78]);
+
+	writel(DDRMC_CR82_INT_MASK, &ddrmr->cr[82]);
+
+	writel(DDRMC_CR87_ODT_RD_MAPCS0(timings->odt_rd_mapcs0) |
+		   DDRMC_CR87_ODT_WR_MAPCS0(timings->odt_wr_mapcs0),
+		   &ddrmr->cr[87]);
+	writel(DDRMC_CR88_TODTL_CMD(4), &ddrmr->cr[88]);
+	writel(DDRMC_CR89_AODT_RWSMCS(2), &ddrmr->cr[89]);
+
+	writel(DDRMC_CR91_R2W_SMCSDL(2), &ddrmr->cr[91]);
+	writel(DDRMC_CR96_WLMRD(timings->wlmrd) |
+		   DDRMC_CR96_WLDQSEN(timings->wldqsen), &ddrmr->cr[96]);
+
+	/* execute custom CR setting sequence (may be NULL) */
+	cr_setting = board_cr_settings;
+	if (cr_setting != NULL)
+		while (cr_setting->cr_rnum >= 0) {
+			writel(cr_setting->setting,
+			       &ddrmr->cr[cr_setting->cr_rnum]);
+			cr_setting++;
+		}
+
+	/* perform default PHY settings (may be overridden by custom settings */
+	phy_setting = default_phy_settings;
+	while (phy_setting->phy_rnum >= 0) {
+		writel(phy_setting->setting,
+		       &ddrmr->phy[phy_setting->phy_rnum]);
+		phy_setting++;
+	}
+
+	/* execute custom PHY setting sequence (may be NULL) */
+	phy_setting = board_phy_settings;
+	if (phy_setting != NULL)
+		while (phy_setting->phy_rnum >= 0) {
+			writel(phy_setting->setting,
+			       &ddrmr->phy[phy_setting->phy_rnum]);
+			phy_setting++;
+		}
+
+	/* all inits done, start the DDR controller */
+	writel(DDRMC_CR00_DRAM_CLASS_DDR3 | DDRMC_CR00_START, &ddrmr->cr[0]);
+
+	while (!(readl(&ddrmr->cr[80]) & DDRMC_CR80_MC_INIT_COMPLETE))
+		udelay(10);
+	writel(DDRMC_CR80_MC_INIT_COMPLETE, &ddrmr->cr[81]);
+
+#ifdef CONFIG_DDRMC_VF610_CALIBRATION
+	ddrmc_calibration(ddrmr);
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/hab.c b/roms/u-boot/arch/arm/mach-imx/hab.c
new file mode 100644
index 000000000..00bd157d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/hab.c
@@ -0,0 +1,1011 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <fuse.h>
+#include <mapmem.h>
+#include <image.h>
+#include <asm/io.h>
+#include <asm/global_data.h>
+#include <asm/system.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/hab.h>
+#include <linux/arm-smccc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ALIGN_SIZE		0x1000
+#define MX6DQ_PU_IROM_MMU_EN_VAR	0x009024a8
+#define MX6DLS_PU_IROM_MMU_EN_VAR	0x00901dd0
+#define MX6SL_PU_IROM_MMU_EN_VAR	0x00901c60
+#define IS_HAB_ENABLED_BIT \
+	(is_soc_type(MXC_SOC_MX7ULP) ? 0x80000000 :	\
+	 ((is_soc_type(MXC_SOC_MX7) || is_soc_type(MXC_SOC_IMX8M)) ? 0x2000000 : 0x2))
+
+#ifdef CONFIG_MX7ULP
+#define HAB_M4_PERSISTENT_START	((soc_rev() >= CHIP_REV_2_0) ? 0x20008040 : \
+				  0x20008180)
+#define HAB_M4_PERSISTENT_BYTES		0xB80
+#endif
+
+static int ivt_header_error(const char *err_str, struct ivt_header *ivt_hdr)
+{
+	printf("%s magic=0x%x length=0x%02x version=0x%x\n", err_str,
+	       ivt_hdr->magic, ivt_hdr->length, ivt_hdr->version);
+
+	return 1;
+}
+
+static int verify_ivt_header(struct ivt_header *ivt_hdr)
+{
+	int result = 0;
+
+	if (ivt_hdr->magic != IVT_HEADER_MAGIC)
+		result = ivt_header_error("bad magic", ivt_hdr);
+
+	if (be16_to_cpu(ivt_hdr->length) != IVT_TOTAL_LENGTH)
+		result = ivt_header_error("bad length", ivt_hdr);
+
+	if ((ivt_hdr->version & HAB_MAJ_MASK) != HAB_MAJ_VER)
+		result = ivt_header_error("bad version", ivt_hdr);
+
+	return result;
+}
+
+#ifdef CONFIG_ARM64
+#define FSL_SIP_HAB		0xC2000007
+#define FSL_SIP_HAB_AUTHENTICATE	0x00
+#define FSL_SIP_HAB_ENTRY		0x01
+#define FSL_SIP_HAB_EXIT		0x02
+#define FSL_SIP_HAB_REPORT_EVENT	0x03
+#define FSL_SIP_HAB_REPORT_STATUS	0x04
+#define FSL_SIP_HAB_FAILSAFE		0x05
+#define FSL_SIP_HAB_CHECK_TARGET	0x06
+static volatile gd_t *gd_save;
+#endif
+
+static inline void save_gd(void)
+{
+#ifdef CONFIG_ARM64
+	gd_save = gd;
+#endif
+}
+
+static inline void restore_gd(void)
+{
+#ifdef CONFIG_ARM64
+	/*
+	 * Make will already error that reserving x18 is not supported at the
+	 * time of writing, clang: error: unknown argument: '-ffixed-x18'
+	 */
+	__asm__ volatile("mov x18, %0\n" : : "r" (gd_save));
+#endif
+}
+
+enum hab_status hab_rvt_report_event(enum hab_status status, u32 index,
+				     u8 *event, size_t *bytes)
+{
+	enum hab_status ret;
+	hab_rvt_report_event_t *hab_rvt_report_event_func;
+	struct arm_smccc_res res __maybe_unused;
+
+	hab_rvt_report_event_func =  (hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT;
+#if defined(CONFIG_ARM64)
+	if (current_el() != 3) {
+		/* call sip */
+		arm_smccc_smc(FSL_SIP_HAB, FSL_SIP_HAB_REPORT_EVENT, (unsigned long)index,
+			      (unsigned long)event, (unsigned long)bytes, 0, 0, 0, &res);
+		return (enum hab_status)res.a0;
+	}
+#endif
+
+	save_gd();
+	ret = hab_rvt_report_event_func(status, index, event, bytes);
+	restore_gd();
+
+	return ret;
+
+}
+
+enum hab_status hab_rvt_report_status(enum hab_config *config, enum hab_state *state)
+{
+	enum hab_status ret;
+	hab_rvt_report_status_t *hab_rvt_report_status_func;
+	struct arm_smccc_res res __maybe_unused;
+
+	hab_rvt_report_status_func = (hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS;
+#if defined(CONFIG_ARM64)
+	if (current_el() != 3) {
+		/* call sip */
+		arm_smccc_smc(FSL_SIP_HAB, FSL_SIP_HAB_REPORT_STATUS, (unsigned long)config,
+			      (unsigned long)state, 0, 0, 0, 0, &res);
+		return (enum hab_status)res.a0;
+	}
+#endif
+
+	save_gd();
+	ret = hab_rvt_report_status_func(config, state);
+	restore_gd();
+
+	return ret;
+}
+
+enum hab_status hab_rvt_entry(void)
+{
+	enum hab_status ret;
+	hab_rvt_entry_t *hab_rvt_entry_func;
+	struct arm_smccc_res res __maybe_unused;
+
+	hab_rvt_entry_func = (hab_rvt_entry_t *)HAB_RVT_ENTRY;
+#if defined(CONFIG_ARM64)
+	if (current_el() != 3) {
+		/* call sip */
+		arm_smccc_smc(FSL_SIP_HAB, FSL_SIP_HAB_ENTRY, 0, 0, 0, 0, 0, 0, &res);
+		return (enum hab_status)res.a0;
+	}
+#endif
+
+	save_gd();
+	ret = hab_rvt_entry_func();
+	restore_gd();
+
+	return ret;
+}
+
+enum hab_status hab_rvt_exit(void)
+{
+	enum hab_status ret;
+	hab_rvt_exit_t *hab_rvt_exit_func;
+	struct arm_smccc_res res __maybe_unused;
+
+	hab_rvt_exit_func =  (hab_rvt_exit_t *)HAB_RVT_EXIT;
+#if defined(CONFIG_ARM64)
+	if (current_el() != 3) {
+		/* call sip */
+		arm_smccc_smc(FSL_SIP_HAB, FSL_SIP_HAB_EXIT, 0, 0, 0, 0, 0, 0, &res);
+		return (enum hab_status)res.a0;
+	}
+#endif
+
+	save_gd();
+	ret = hab_rvt_exit_func();
+	restore_gd();
+
+	return ret;
+}
+
+void hab_rvt_failsafe(void)
+{
+	hab_rvt_failsafe_t *hab_rvt_failsafe_func;
+
+	hab_rvt_failsafe_func = (hab_rvt_failsafe_t *)HAB_RVT_FAILSAFE;
+#if defined(CONFIG_ARM64)
+	if (current_el() != 3) {
+		/* call sip */
+		arm_smccc_smc(FSL_SIP_HAB, FSL_SIP_HAB_FAILSAFE, 0, 0, 0, 0, 0, 0, NULL);
+		return;
+	}
+#endif
+
+	save_gd();
+	hab_rvt_failsafe_func();
+	restore_gd();
+}
+
+enum hab_status hab_rvt_check_target(enum hab_target type, const void *start,
+					       size_t bytes)
+{
+	enum hab_status ret;
+	hab_rvt_check_target_t *hab_rvt_check_target_func;
+	struct arm_smccc_res res __maybe_unused;
+
+	hab_rvt_check_target_func =  (hab_rvt_check_target_t *)HAB_RVT_CHECK_TARGET;
+#if defined(CONFIG_ARM64)
+	if (current_el() != 3) {
+		/* call sip */
+		arm_smccc_smc(FSL_SIP_HAB, FSL_SIP_HAB_CHECK_TARGET, (unsigned long)type,
+			      (unsigned long)start, (unsigned long)bytes, 0, 0, 0, &res);
+		return (enum hab_status)res.a0;
+	}
+#endif
+
+	save_gd();
+	ret = hab_rvt_check_target_func(type, start, bytes);
+	restore_gd();
+
+	return ret;
+}
+
+void *hab_rvt_authenticate_image(uint8_t cid, ptrdiff_t ivt_offset,
+				 void **start, size_t *bytes, hab_loader_callback_f_t loader)
+{
+	void *ret;
+	hab_rvt_authenticate_image_t *hab_rvt_authenticate_image_func;
+	struct arm_smccc_res res __maybe_unused;
+
+	hab_rvt_authenticate_image_func = (hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE;
+#if defined(CONFIG_ARM64)
+	if (current_el() != 3) {
+		/* call sip */
+		arm_smccc_smc(FSL_SIP_HAB, FSL_SIP_HAB_AUTHENTICATE, (unsigned long)ivt_offset,
+			      (unsigned long)start, (unsigned long)bytes, 0, 0, 0, &res);
+		return (void *)res.a0;
+	}
+#endif
+
+	save_gd();
+	ret = hab_rvt_authenticate_image_func(cid, ivt_offset, start, bytes, loader);
+	restore_gd();
+
+	return ret;
+}
+
+#if !defined(CONFIG_SPL_BUILD)
+
+#define MAX_RECORD_BYTES     (8*1024) /* 4 kbytes */
+
+struct record {
+	uint8_t  tag;						/* Tag */
+	uint8_t  len[2];					/* Length */
+	uint8_t  par;						/* Version */
+	uint8_t  contents[MAX_RECORD_BYTES];/* Record Data */
+	bool	 any_rec_flag;
+};
+
+static char *rsn_str[] = {
+			  "RSN = HAB_RSN_ANY (0x00)\n",
+			  "RSN = HAB_ENG_FAIL (0x30)\n",
+			  "RSN = HAB_INV_ADDRESS (0x22)\n",
+			  "RSN = HAB_INV_ASSERTION (0x0C)\n",
+			  "RSN = HAB_INV_CALL (0x28)\n",
+			  "RSN = HAB_INV_CERTIFICATE (0x21)\n",
+			  "RSN = HAB_INV_COMMAND (0x06)\n",
+			  "RSN = HAB_INV_CSF (0x11)\n",
+			  "RSN = HAB_INV_DCD (0x27)\n",
+			  "RSN = HAB_INV_INDEX (0x0F)\n",
+			  "RSN = HAB_INV_IVT (0x05)\n",
+			  "RSN = HAB_INV_KEY (0x1D)\n",
+			  "RSN = HAB_INV_RETURN (0x1E)\n",
+			  "RSN = HAB_INV_SIGNATURE (0x18)\n",
+			  "RSN = HAB_INV_SIZE (0x17)\n",
+			  "RSN = HAB_MEM_FAIL (0x2E)\n",
+			  "RSN = HAB_OVR_COUNT (0x2B)\n",
+			  "RSN = HAB_OVR_STORAGE (0x2D)\n",
+			  "RSN = HAB_UNS_ALGORITHM (0x12)\n",
+			  "RSN = HAB_UNS_COMMAND (0x03)\n",
+			  "RSN = HAB_UNS_ENGINE (0x0A)\n",
+			  "RSN = HAB_UNS_ITEM (0x24)\n",
+			  "RSN = HAB_UNS_KEY (0x1B)\n",
+			  "RSN = HAB_UNS_PROTOCOL (0x14)\n",
+			  "RSN = HAB_UNS_STATE (0x09)\n",
+			  "RSN = INVALID\n",
+			  NULL
+};
+
+static char *sts_str[] = {
+			  "STS = HAB_SUCCESS (0xF0)\n",
+			  "STS = HAB_FAILURE (0x33)\n",
+			  "STS = HAB_WARNING (0x69)\n",
+			  "STS = INVALID\n",
+			  NULL
+};
+
+static char *eng_str[] = {
+			  "ENG = HAB_ENG_ANY (0x00)\n",
+			  "ENG = HAB_ENG_SCC (0x03)\n",
+			  "ENG = HAB_ENG_RTIC (0x05)\n",
+			  "ENG = HAB_ENG_SAHARA (0x06)\n",
+			  "ENG = HAB_ENG_CSU (0x0A)\n",
+			  "ENG = HAB_ENG_SRTC (0x0C)\n",
+			  "ENG = HAB_ENG_DCP (0x1B)\n",
+			  "ENG = HAB_ENG_CAAM (0x1D)\n",
+			  "ENG = HAB_ENG_SNVS (0x1E)\n",
+			  "ENG = HAB_ENG_OCOTP (0x21)\n",
+			  "ENG = HAB_ENG_DTCP (0x22)\n",
+			  "ENG = HAB_ENG_ROM (0x36)\n",
+			  "ENG = HAB_ENG_HDCP (0x24)\n",
+			  "ENG = HAB_ENG_RTL (0x77)\n",
+			  "ENG = HAB_ENG_SW (0xFF)\n",
+			  "ENG = INVALID\n",
+			  NULL
+};
+
+static char *ctx_str[] = {
+			  "CTX = HAB_CTX_ANY(0x00)\n",
+			  "CTX = HAB_CTX_FAB (0xFF)\n",
+			  "CTX = HAB_CTX_ENTRY (0xE1)\n",
+			  "CTX = HAB_CTX_TARGET (0x33)\n",
+			  "CTX = HAB_CTX_AUTHENTICATE (0x0A)\n",
+			  "CTX = HAB_CTX_DCD (0xDD)\n",
+			  "CTX = HAB_CTX_CSF (0xCF)\n",
+			  "CTX = HAB_CTX_COMMAND (0xC0)\n",
+			  "CTX = HAB_CTX_AUT_DAT (0xDB)\n",
+			  "CTX = HAB_CTX_ASSERT (0xA0)\n",
+			  "CTX = HAB_CTX_EXIT (0xEE)\n",
+			  "CTX = INVALID\n",
+			  NULL
+};
+
+static uint8_t hab_statuses[5] = {
+	HAB_STS_ANY,
+	HAB_FAILURE,
+	HAB_WARNING,
+	HAB_SUCCESS,
+	-1
+};
+
+static uint8_t hab_reasons[26] = {
+	HAB_RSN_ANY,
+	HAB_ENG_FAIL,
+	HAB_INV_ADDRESS,
+	HAB_INV_ASSERTION,
+	HAB_INV_CALL,
+	HAB_INV_CERTIFICATE,
+	HAB_INV_COMMAND,
+	HAB_INV_CSF,
+	HAB_INV_DCD,
+	HAB_INV_INDEX,
+	HAB_INV_IVT,
+	HAB_INV_KEY,
+	HAB_INV_RETURN,
+	HAB_INV_SIGNATURE,
+	HAB_INV_SIZE,
+	HAB_MEM_FAIL,
+	HAB_OVR_COUNT,
+	HAB_OVR_STORAGE,
+	HAB_UNS_ALGORITHM,
+	HAB_UNS_COMMAND,
+	HAB_UNS_ENGINE,
+	HAB_UNS_ITEM,
+	HAB_UNS_KEY,
+	HAB_UNS_PROTOCOL,
+	HAB_UNS_STATE,
+	-1
+};
+
+static uint8_t hab_contexts[12] = {
+	HAB_CTX_ANY,
+	HAB_CTX_FAB,
+	HAB_CTX_ENTRY,
+	HAB_CTX_TARGET,
+	HAB_CTX_AUTHENTICATE,
+	HAB_CTX_DCD,
+	HAB_CTX_CSF,
+	HAB_CTX_COMMAND,
+	HAB_CTX_AUT_DAT,
+	HAB_CTX_ASSERT,
+	HAB_CTX_EXIT,
+	-1
+};
+
+static uint8_t hab_engines[16] = {
+	HAB_ENG_ANY,
+	HAB_ENG_SCC,
+	HAB_ENG_RTIC,
+	HAB_ENG_SAHARA,
+	HAB_ENG_CSU,
+	HAB_ENG_SRTC,
+	HAB_ENG_DCP,
+	HAB_ENG_CAAM,
+	HAB_ENG_SNVS,
+	HAB_ENG_OCOTP,
+	HAB_ENG_DTCP,
+	HAB_ENG_ROM,
+	HAB_ENG_HDCP,
+	HAB_ENG_RTL,
+	HAB_ENG_SW,
+	-1
+};
+
+static inline uint8_t get_idx(uint8_t *list, uint8_t tgt)
+{
+	uint8_t idx = 0;
+	uint8_t element = list[idx];
+	while (element != -1) {
+		if (element == tgt)
+			return idx;
+		element = list[++idx];
+	}
+	return -1;
+}
+
+static void process_event_record(uint8_t *event_data, size_t bytes)
+{
+	struct record *rec = (struct record *)event_data;
+
+	printf("\n\n%s", sts_str[get_idx(hab_statuses, rec->contents[0])]);
+	printf("%s", rsn_str[get_idx(hab_reasons, rec->contents[1])]);
+	printf("%s", ctx_str[get_idx(hab_contexts, rec->contents[2])]);
+	printf("%s", eng_str[get_idx(hab_engines, rec->contents[3])]);
+}
+
+static void display_event(uint8_t *event_data, size_t bytes)
+{
+	uint32_t i;
+
+	if (!(event_data && bytes > 0))
+		return;
+
+	for (i = 0; i < bytes; i++) {
+		if (i == 0)
+			printf("\t0x%02x", event_data[i]);
+		else if ((i % 8) == 0)
+			printf("\n\t0x%02x", event_data[i]);
+		else
+			printf(" 0x%02x", event_data[i]);
+	}
+
+	process_event_record(event_data, bytes);
+}
+
+static int get_hab_status(void)
+{
+	uint32_t index = 0; /* Loop index */
+	uint8_t event_data[128]; /* Event data buffer */
+	size_t bytes = sizeof(event_data); /* Event size in bytes */
+	enum hab_config config = 0;
+	enum hab_state state = 0;
+
+	if (imx_hab_is_enabled())
+		puts("\nSecure boot enabled\n");
+	else
+		puts("\nSecure boot disabled\n");
+
+	/* Check HAB status */
+	if (hab_rvt_report_status(&config, &state) != HAB_SUCCESS) {
+		printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n",
+		       config, state);
+
+		/* Display HAB events */
+		while (hab_rvt_report_event(HAB_STS_ANY, index, event_data,
+					&bytes) == HAB_SUCCESS) {
+			puts("\n");
+			printf("--------- HAB Event %d -----------------\n",
+			       index + 1);
+			puts("event data:\n");
+			display_event(event_data, bytes);
+			puts("\n");
+			bytes = sizeof(event_data);
+			index++;
+		}
+	}
+	/* Display message if no HAB events are found */
+	else {
+		printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n",
+		       config, state);
+		puts("No HAB Events Found!\n\n");
+	}
+	return 0;
+}
+
+#ifdef CONFIG_MX7ULP
+
+static int get_record_len(struct record *rec)
+{
+	return (size_t)((rec->len[0] << 8) + (rec->len[1]));
+}
+
+static int get_hab_status_m4(void)
+{
+	unsigned int index = 0;
+	uint8_t event_data[128];
+	size_t record_len, offset = 0;
+	enum hab_config config = 0;
+	enum hab_state state = 0;
+
+	if (imx_hab_is_enabled())
+		puts("\nSecure boot enabled\n");
+	else
+		puts("\nSecure boot disabled\n");
+
+	/*
+	 * HAB in both A7 and M4 gather the security state
+	 * and configuration of the chip from
+	 * shared SNVS module
+	 */
+	hab_rvt_report_status(&config, &state);
+	printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n",
+	       config, state);
+
+	struct record *rec = (struct record *)(HAB_M4_PERSISTENT_START);
+
+	record_len = get_record_len(rec);
+
+	/* Check if HAB persistent memory is valid */
+	if (rec->tag != HAB_TAG_EVT_DEF ||
+	    record_len != sizeof(struct evt_def) ||
+	    (rec->par & HAB_MAJ_MASK) != HAB_MAJ_VER) {
+		puts("\nERROR: Invalid HAB persistent memory\n");
+		return 1;
+	}
+
+	/* Parse events in HAB M4 persistent memory region */
+	while (offset < HAB_M4_PERSISTENT_BYTES) {
+		rec = (struct record *)(HAB_M4_PERSISTENT_START + offset);
+
+		record_len = get_record_len(rec);
+
+		if (rec->tag == HAB_TAG_EVT) {
+			memcpy(&event_data, rec, record_len);
+			puts("\n");
+			printf("--------- HAB Event %d -----------------\n",
+			       index + 1);
+			puts("event data:\n");
+			display_event(event_data, record_len);
+			puts("\n");
+			index++;
+		}
+
+		offset += record_len;
+
+		/* Ensure all records start on a word boundary */
+		if ((offset % 4) != 0)
+			offset =  offset + (4 - (offset % 4));
+	}
+
+	if (!index)
+		puts("No HAB Events Found!\n\n");
+
+	return 0;
+}
+#endif
+
+static int do_hab_status(struct cmd_tbl *cmdtp, int flag, int argc,
+			 char *const argv[])
+{
+#ifdef CONFIG_MX7ULP
+	if ((argc > 2)) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	if (strcmp("m4", argv[1]) == 0)
+		get_hab_status_m4();
+	else
+		get_hab_status();
+#else
+	if ((argc != 1)) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	get_hab_status();
+#endif
+
+	return 0;
+}
+
+static ulong get_image_ivt_offset(ulong img_addr)
+{
+	const void *buf;
+
+	buf = map_sysmem(img_addr, 0);
+	switch (genimg_get_format(buf)) {
+#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
+	case IMAGE_FORMAT_LEGACY:
+		return (image_get_image_size((image_header_t *)img_addr)
+			+ 0x1000 - 1)  & ~(0x1000 - 1);
+#endif
+#if IMAGE_ENABLE_FIT
+	case IMAGE_FORMAT_FIT:
+		return (fit_get_size(buf) + 0x1000 - 1)  & ~(0x1000 - 1);
+#endif
+	default:
+		return 0;
+	}
+}
+
+static int do_authenticate_image(struct cmd_tbl *cmdtp, int flag, int argc,
+				 char *const argv[])
+{
+	ulong	addr, length, ivt_offset;
+	int	rcode = 0;
+
+	if (argc < 3)
+		return CMD_RET_USAGE;
+
+	addr = simple_strtoul(argv[1], NULL, 16);
+	length = simple_strtoul(argv[2], NULL, 16);
+	if (argc == 3)
+		ivt_offset = get_image_ivt_offset(addr);
+	else
+		ivt_offset = simple_strtoul(argv[3], NULL, 16);
+
+	rcode = imx_hab_authenticate_image(addr, length, ivt_offset);
+	if (rcode == 0)
+		rcode = CMD_RET_SUCCESS;
+	else
+		rcode = CMD_RET_FAILURE;
+
+	return rcode;
+}
+
+static int do_hab_failsafe(struct cmd_tbl *cmdtp, int flag, int argc,
+			   char *const argv[])
+{
+	if (argc != 1) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	hab_rvt_failsafe();
+
+	return 0;
+}
+
+static int do_hab_version(struct cmd_tbl *cmdtp, int flag, int argc,
+			  char *const argv[])
+{
+	struct hab_hdr *hdr = (struct hab_hdr *)HAB_RVT_BASE;
+
+	if (hdr->tag != HAB_TAG_RVT) {
+		printf("Unexpected header tag: %x\n", hdr->tag);
+		return CMD_RET_FAILURE;
+	}
+
+	printf("HAB version: %d.%d\n", hdr->par >> 4, hdr->par & 0xf);
+
+	return 0;
+}
+
+static int do_authenticate_image_or_failover(struct cmd_tbl *cmdtp, int flag,
+					     int argc, char *const argv[])
+{
+	int ret = CMD_RET_FAILURE;
+
+	if (argc != 4) {
+		ret = CMD_RET_USAGE;
+		goto error;
+	}
+
+	if (!imx_hab_is_enabled()) {
+		printf("error: secure boot disabled\n");
+		goto error;
+	}
+
+	if (do_authenticate_image(NULL, flag, argc, argv) != CMD_RET_SUCCESS) {
+		fprintf(stderr, "authentication fail -> %s %s %s %s\n",
+			argv[0], argv[1], argv[2], argv[3]);
+		do_hab_failsafe(0, 0, 1, NULL);
+	};
+	ret = CMD_RET_SUCCESS;
+error:
+	return ret;
+}
+
+#ifdef CONFIG_MX7ULP
+U_BOOT_CMD(
+		hab_status, CONFIG_SYS_MAXARGS, 2, do_hab_status,
+		"display HAB status and events",
+		"hab_status - A7 HAB event and status\n"
+		"hab_status m4 - M4 HAB event and status"
+	  );
+#else
+U_BOOT_CMD(
+		hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status,
+		"display HAB status",
+		""
+	  );
+#endif
+
+U_BOOT_CMD(
+		hab_auth_img, 4, 0, do_authenticate_image,
+		"authenticate image via HAB",
+		"addr length ivt_offset\n"
+		"addr - image hex address\n"
+		"length - image hex length\n"
+		"ivt_offset - hex offset of IVT in the image"
+	  );
+
+U_BOOT_CMD(
+		hab_failsafe, CONFIG_SYS_MAXARGS, 1, do_hab_failsafe,
+		"run BootROM failsafe routine",
+		""
+	  );
+
+U_BOOT_CMD(
+		hab_auth_img_or_fail, 4, 0,
+		do_authenticate_image_or_failover,
+		"authenticate image via HAB on failure drop to USB BootROM mode",
+		"addr length ivt_offset\n"
+		"addr - image hex address\n"
+		"length - image hex length\n"
+		"ivt_offset - hex offset of IVT in the image"
+	  );
+
+U_BOOT_CMD(
+		hab_version, 1, 0, do_hab_version,
+		"print HAB major/minor version",
+		""
+	  );
+
+#endif /* !defined(CONFIG_SPL_BUILD) */
+
+/* Get CSF Header length */
+static int get_hab_hdr_len(struct hab_hdr *hdr)
+{
+	return (size_t)((hdr->len[0] << 8) + (hdr->len[1]));
+}
+
+/* Check whether addr lies between start and
+ * end and is within the length of the image
+ */
+static int chk_bounds(u8 *addr, size_t bytes, u8 *start, u8 *end)
+{
+	size_t csf_size = (size_t)((end + 1) - addr);
+
+	return (addr && (addr >= start) && (addr <= end) &&
+		(csf_size >= bytes));
+}
+
+/* Get Length of each command in CSF */
+static int get_csf_cmd_hdr_len(u8 *csf_hdr)
+{
+	if (*csf_hdr == HAB_CMD_HDR)
+		return sizeof(struct hab_hdr);
+
+	return get_hab_hdr_len((struct hab_hdr *)csf_hdr);
+}
+
+/* Check if CSF is valid */
+static bool csf_is_valid(struct ivt *ivt, ulong start_addr, size_t bytes)
+{
+	u8 *start = (u8 *)start_addr;
+	u8 *csf_hdr;
+	u8 *end;
+
+	size_t csf_hdr_len;
+	size_t cmd_hdr_len;
+	size_t offset = 0;
+
+	if (bytes != 0)
+		end = start + bytes - 1;
+	else
+		end = start;
+
+	/* Verify if CSF pointer content is zero */
+	if (!ivt->csf) {
+		puts("Error: CSF pointer is NULL\n");
+		return false;
+	}
+
+	csf_hdr = (u8 *)(ulong)ivt->csf;
+
+	/* Verify if CSF Header exist */
+	if (*csf_hdr != HAB_CMD_HDR) {
+		puts("Error: CSF header command not found\n");
+		return false;
+	}
+
+	csf_hdr_len = get_hab_hdr_len((struct hab_hdr *)csf_hdr);
+
+	/* Check if the CSF lies within the image bounds */
+	if (!chk_bounds(csf_hdr, csf_hdr_len, start, end)) {
+		puts("Error: CSF lies outside the image bounds\n");
+		return false;
+	}
+
+	do {
+		struct hab_hdr *cmd;
+
+		cmd = (struct hab_hdr *)&csf_hdr[offset];
+
+		switch (cmd->tag) {
+		case (HAB_CMD_WRT_DAT):
+			puts("Error: Deprecated write command found\n");
+			return false;
+		case (HAB_CMD_CHK_DAT):
+			puts("Error: Deprecated check command found\n");
+			return false;
+		case (HAB_CMD_SET):
+			if (cmd->par == HAB_PAR_MID) {
+				puts("Error: Deprecated Set MID command found\n");
+				return false;
+			}
+		default:
+			break;
+		}
+
+		cmd_hdr_len = get_csf_cmd_hdr_len(&csf_hdr[offset]);
+		if (!cmd_hdr_len) {
+			puts("Error: Invalid command length\n");
+			return false;
+		}
+		offset += cmd_hdr_len;
+
+	} while (offset < csf_hdr_len);
+
+	return true;
+}
+
+/*
+ * Validate IVT structure of the image being authenticated
+ */
+static int validate_ivt(struct ivt *ivt_initial)
+{
+	struct ivt_header *ivt_hdr = &ivt_initial->hdr;
+
+	if ((ulong)ivt_initial & 0x3) {
+		puts("Error: Image's start address is not 4 byte aligned\n");
+		return 0;
+	}
+
+	/* Check IVT fields before allowing authentication */
+	if ((!verify_ivt_header(ivt_hdr)) && \
+	    (ivt_initial->entry != 0x0) && \
+	    (ivt_initial->reserved1 == 0x0) && \
+	    (ivt_initial->self == \
+		   (uint32_t)((ulong)ivt_initial & 0xffffffff)) && \
+	    (ivt_initial->csf != 0x0) && \
+	    (ivt_initial->reserved2 == 0x0)) {
+		/* Report boot failure if DCD pointer is found in IVT */
+		if (ivt_initial->dcd != 0x0)
+			puts("Error: DCD pointer must be 0\n");
+		else
+			return 1;
+	}
+
+	puts("Error: Invalid IVT structure\n");
+	debug("\nAllowed IVT structure:\n");
+	debug("IVT HDR       = 0x4X2000D1\n");
+	debug("IVT ENTRY     = 0xXXXXXXXX\n");
+	debug("IVT RSV1      = 0x0\n");
+	debug("IVT DCD       = 0x0\n");		/* Recommended */
+	debug("IVT BOOT_DATA = 0xXXXXXXXX\n");	/* Commonly 0x0 */
+	debug("IVT SELF      = 0xXXXXXXXX\n");	/* = ddr_start + ivt_offset */
+	debug("IVT CSF       = 0xXXXXXXXX\n");
+	debug("IVT RSV2      = 0x0\n");
+
+	/* Invalid IVT structure */
+	return 0;
+}
+
+bool imx_hab_is_enabled(void)
+{
+	struct imx_sec_config_fuse_t *fuse =
+		(struct imx_sec_config_fuse_t *)&imx_sec_config_fuse;
+	uint32_t reg;
+	int ret;
+
+	ret = fuse_read(fuse->bank, fuse->word, &reg);
+	if (ret) {
+		puts("\nSecure boot fuse read error\n");
+		return ret;
+	}
+
+	return (reg & IS_HAB_ENABLED_BIT) == IS_HAB_ENABLED_BIT;
+}
+
+int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,
+			       uint32_t ivt_offset)
+{
+	ulong load_addr = 0;
+	size_t bytes;
+	ulong ivt_addr = 0;
+	int result = 1;
+	ulong start;
+	struct ivt *ivt;
+	enum hab_status status;
+
+	if (!imx_hab_is_enabled())
+		puts("hab fuse not enabled\n");
+
+	printf("\nAuthenticate image from DDR location 0x%x...\n",
+	       ddr_start);
+
+	hab_caam_clock_enable(1);
+
+	/* Calculate IVT address header */
+	ivt_addr = (ulong) (ddr_start + ivt_offset);
+	ivt = (struct ivt *)ivt_addr;
+
+	/* Verify IVT header bugging out on error */
+	if (!validate_ivt(ivt))
+		goto hab_authentication_exit;
+
+	start = ddr_start;
+	bytes = image_size;
+
+	/* Verify CSF */
+	if (!csf_is_valid(ivt, start, bytes))
+		goto hab_authentication_exit;
+
+	if (hab_rvt_entry() != HAB_SUCCESS) {
+		puts("hab entry function fail\n");
+		goto hab_exit_failure_print_status;
+	}
+
+	status = hab_rvt_check_target(HAB_TGT_MEMORY, (void *)(ulong)ddr_start, bytes);
+	if (status != HAB_SUCCESS) {
+		printf("HAB check target 0x%08x-0x%08lx fail\n",
+		       ddr_start, ddr_start + (ulong)bytes);
+		goto hab_exit_failure_print_status;
+	}
+#ifdef DEBUG
+	printf("\nivt_offset = 0x%x, ivt addr = 0x%lx\n", ivt_offset, ivt_addr);
+	printf("ivt entry = 0x%08x, dcd = 0x%08x, csf = 0x%08x\n", ivt->entry,
+	       ivt->dcd, ivt->csf);
+	puts("Dumping IVT\n");
+	print_buffer(ivt_addr, (void *)(ivt_addr), 4, 0x8, 0);
+
+	puts("Dumping CSF Header\n");
+	print_buffer(ivt->csf, (void *)(ivt->csf), 4, 0x10, 0);
+
+#if  !defined(CONFIG_SPL_BUILD)
+	get_hab_status();
+#endif
+
+	puts("\nCalling authenticate_image in ROM\n");
+	printf("\tivt_offset = 0x%x\n", ivt_offset);
+	printf("\tstart = 0x%08lx\n", start);
+	printf("\tbytes = 0x%x\n", bytes);
+#endif
+
+#ifndef CONFIG_ARM64
+	/*
+	 * If the MMU is enabled, we have to notify the ROM
+	 * code, or it won't flush the caches when needed.
+	 * This is done, by setting the "pu_irom_mmu_enabled"
+	 * word to 1. You can find its address by looking in
+	 * the ROM map. This is critical for
+	 * authenticate_image(). If MMU is enabled, without
+	 * setting this bit, authentication will fail and may
+	 * crash.
+	 */
+	/* Check MMU enabled */
+	if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) {
+		if (is_mx6dq()) {
+			/*
+			 * This won't work on Rev 1.0.0 of
+			 * i.MX6Q/D, since their ROM doesn't
+			 * do cache flushes. don't think any
+			 * exist, so we ignore them.
+			 */
+			if (!is_mx6dqp())
+				writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
+		} else if (is_mx6sdl()) {
+			writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
+		} else if (is_mx6sl()) {
+			writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
+		}
+	}
+#endif
+
+	load_addr = (ulong)hab_rvt_authenticate_image(
+			HAB_CID_UBOOT,
+			ivt_offset, (void **)&start,
+			(size_t *)&bytes, NULL);
+	if (hab_rvt_exit() != HAB_SUCCESS) {
+		puts("hab exit function fail\n");
+		load_addr = 0;
+	}
+
+hab_exit_failure_print_status:
+#if !defined(CONFIG_SPL_BUILD)
+	get_hab_status();
+#endif
+
+hab_authentication_exit:
+
+	if (load_addr != 0 || !imx_hab_is_enabled())
+		result = 0;
+
+	return result;
+}
+
+int authenticate_image(u32 ddr_start, u32 raw_image_size)
+{
+	u32 ivt_offset;
+	size_t bytes;
+
+	ivt_offset = (raw_image_size + ALIGN_SIZE - 1) &
+					~(ALIGN_SIZE - 1);
+	bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE;
+
+	return imx_hab_authenticate_image(ddr_start, bytes, ivt_offset);
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/i2c-mxv7.c b/roms/u-boot/arch/arm/mach-imx/i2c-mxv7.c
new file mode 100644
index 000000000..d36347d8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/i2c-mxv7.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Boundary Devices Inc.
+ */
+#include <common.h>
+#include <malloc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <watchdog.h>
+
+int force_idle_bus(void *priv)
+{
+	int i;
+	int sda, scl;
+	ulong elapsed, start_time;
+	struct i2c_pads_info *p = (struct i2c_pads_info *)priv;
+	int ret = 0;
+
+	gpio_direction_input(p->sda.gp);
+	gpio_direction_input(p->scl.gp);
+
+	imx_iomux_v3_setup_pad(p->sda.gpio_mode);
+	imx_iomux_v3_setup_pad(p->scl.gpio_mode);
+
+	sda = gpio_get_value(p->sda.gp);
+	scl = gpio_get_value(p->scl.gp);
+	if ((sda & scl) == 1)
+		goto exit;		/* Bus is idle already */
+
+	printf("%s: sda=%d scl=%d sda.gp=0x%x scl.gp=0x%x\n", __func__,
+		sda, scl, p->sda.gp, p->scl.gp);
+	/* Send high and low on the SCL line */
+	for (i = 0; i < 9; i++) {
+		gpio_direction_output(p->scl.gp, 0);
+		udelay(50);
+		gpio_direction_input(p->scl.gp);
+		udelay(50);
+	}
+	start_time = get_timer(0);
+	for (;;) {
+		sda = gpio_get_value(p->sda.gp);
+		scl = gpio_get_value(p->scl.gp);
+		if ((sda & scl) == 1)
+			break;
+		WATCHDOG_RESET();
+		elapsed = get_timer(start_time);
+		if (elapsed > (CONFIG_SYS_HZ / 5)) {	/* .2 seconds */
+			ret = -EBUSY;
+			printf("%s: failed to clear bus, sda=%d scl=%d\n",
+					__func__, sda, scl);
+			break;
+		}
+	}
+exit:
+	imx_iomux_v3_setup_pad(p->sda.i2c_mode);
+	imx_iomux_v3_setup_pad(p->scl.i2c_mode);
+	return ret;
+}
+
+static void * const i2c_bases[] = {
+	(void *)I2C1_BASE_ADDR,
+	(void *)I2C2_BASE_ADDR,
+#ifdef I2C3_BASE_ADDR
+	(void *)I2C3_BASE_ADDR,
+#endif
+#ifdef I2C4_BASE_ADDR
+	(void *)I2C4_BASE_ADDR,
+#endif
+};
+
+/* i2c_index can be from 0 - 3 */
+int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
+	      struct i2c_pads_info *p)
+{
+	char name[9];
+	int ret;
+
+	if (i2c_index >= ARRAY_SIZE(i2c_bases))
+		return -EINVAL;
+
+	snprintf(name, sizeof(name), "i2c_sda%01d", i2c_index);
+	ret = gpio_request(p->sda.gp, name);
+	if (ret)
+		return ret;
+
+	snprintf(name, sizeof(name), "i2c_scl%01d", i2c_index);
+	ret = gpio_request(p->scl.gp, name);
+	if (ret)
+		goto err_req;
+
+	/* Enable i2c clock */
+	ret = enable_i2c_clk(1, i2c_index);
+	if (ret)
+		goto err_clk;
+
+	/* Make sure bus is idle */
+	ret = force_idle_bus(p);
+	if (ret)
+		goto err_idle;
+
+#if !CONFIG_IS_ENABLED(DM_I2C)
+	bus_i2c_init(i2c_index, speed, slave_addr, force_idle_bus, p);
+#endif
+
+	return 0;
+
+err_idle:
+err_clk:
+	gpio_free(p->scl.gp);
+err_req:
+	gpio_free(p->sda.gp);
+
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/Kconfig b/roms/u-boot/arch/arm/mach-imx/imx8/Kconfig
new file mode 100644
index 000000000..71221d8d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/Kconfig
@@ -0,0 +1,130 @@
+if ARCH_IMX8
+
+config AHAB_BOOT
+	bool "Support i.MX8 AHAB features"
+	imply CMD_DEKBLOB
+	help
+	  This option enables the support for AHAB secure boot.
+
+config IMX8
+	bool
+
+config MU_BASE_SPL
+	hex "MU base address used in SPL"
+	default 0x5d1b0000
+	help
+	  SPL runs in EL3 mode, it use MU0_A to communicate with SCU.
+	  So we could not reuse the one in dts which is for normal U-Boot.
+
+config IMX8QM
+	select IMX8
+	select SUPPORT_SPL
+	select SPL_RECOVER_DATA_SECTION
+	bool
+
+config IMX8QXP
+	select IMX8
+	select SUPPORT_SPL
+	select SPL_RECOVER_DATA_SECTION
+	bool
+
+config SYS_SOC
+	default "imx8"
+
+config SPL_LOAD_IMX_CONTAINER
+	bool "Enable SPL loading U-Boot as a i.MX Container image"
+	depends on SPL
+	help
+	  This is to let SPL could load i.MX8 Container image
+
+config IMX_CONTAINER_CFG
+	string "i.MX Container config file"
+	depends on SPL
+	help
+	  This is to specific the cfg file for generating container
+	  image which will be loaded by SPL.
+
+config BOOTAUX_RESERVED_MEM_BASE
+	hex "i.MX auxiliary core dram memory base"
+	default 0
+
+config BOOTAUX_RESERVED_MEM_SIZE
+	hex "i.MX auxiliary core dram memory size"
+	default 0
+
+choice
+	prompt "i.MX8 board select"
+	optional
+
+config TARGET_APALIS_IMX8
+	bool "Support Apalis iMX8 module"
+	select BOARD_LATE_INIT
+	select IMX8QM
+
+config TARGET_COLIBRI_IMX8X
+	bool "Support Colibri iMX8X module"
+	select BOARD_LATE_INIT
+	select IMX8QXP
+
+config TARGET_APALIS_IMX8X
+	bool "Support Apalis iMX8X module"
+	select BOARD_LATE_INIT
+	select IMX8QXP
+
+config TARGET_DENEB
+	bool "Support i.MX8QXP Capricorn Deneb board"
+	select BOARD_LATE_INIT
+	select IMX8QXP
+
+config TARGET_GIEDI
+	bool "Support i.MX8QXP Capricorn Giedi board"
+	select BOARD_LATE_INIT
+	select IMX8QXP
+
+config TARGET_IMX8QM_MEK
+	bool "Support i.MX8QM MEK board"
+	select BOARD_LATE_INIT
+	select IMX8QM
+
+config TARGET_CONGA_QMX8
+	bool "Support congatec conga-QMX8 board"
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select IMX8QM
+
+config TARGET_IMX8QM_ROM7720_A1
+	bool "Support i.MX8QM ROM-7720-A1"
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select IMX8QM
+
+config TARGET_IMX8QXP_MEK
+	bool "Support i.MX8QXP MEK board"
+	select BOARD_LATE_INIT
+	select IMX8QXP
+
+endchoice
+
+source "board/freescale/imx8qm_mek/Kconfig"
+source "board/freescale/imx8qxp_mek/Kconfig"
+source "board/congatec/cgtqmx8/Kconfig"
+source "board/advantech/imx8qm_rom7720_a1/Kconfig"
+source "board/toradex/apalis-imx8/Kconfig"
+source "board/toradex/colibri-imx8x/Kconfig"
+source "board/toradex/apalis-imx8x/Kconfig"
+source "board/siemens/capricorn/Kconfig"
+
+config IMX_SNVS_SEC_SC
+	bool "Support SNVS configuration"
+	help
+	  Allow to configure the SNVS via SCU API to configure tampers and secure
+	  violation.
+
+config IMX_SNVS_SEC_SC_AUTO
+	bool "Support SNVS configuration command"
+	depends on IMX_SNVS_SEC_SC
+	help
+	  This configuration will apply the selected configurations automatically
+	  at boot.
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/Makefile b/roms/u-boot/arch/arm/mach-imx/imx8/Makefile
new file mode 100644
index 000000000..bbb41adbe
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/Makefile
@@ -0,0 +1,14 @@
+#
+# Copyright 2018 NXP
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += cpu.o iomux.o misc.o lowlevel_init.o
+obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o
+obj-$(CONFIG_AHAB_BOOT) += ahab.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += image.o parse-container.o
+endif
+obj-$(CONFIG_IMX_SNVS_SEC_SC) += snvs_security_sc.o
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/ahab.c b/roms/u-boot/arch/arm/mach-imx/imx8/ahab.c
new file mode 100644
index 000000000..6392fe267
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/ahab.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/mach-imx/sys_proto.h>
+#include <asm/arch-imx/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/image.h>
+#include <console.h>
+#include <cpu_func.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SEC_SECURE_RAM_BASE             (0x31800000UL)
+#define SEC_SECURE_RAM_END_BASE         (SEC_SECURE_RAM_BASE + 0xFFFFUL)
+#define SECO_LOCAL_SEC_SEC_SECURE_RAM_BASE  (0x60000000UL)
+
+#define SECO_PT                 2U
+
+static inline bool check_in_dram(ulong addr)
+{
+	int i;
+	struct bd_info *bd = gd->bd;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) {
+		if (bd->bi_dram[i].size) {
+			if (addr >= bd->bi_dram[i].start &&
+			    addr < (bd->bi_dram[i].start + bd->bi_dram[i].size))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+int authenticate_os_container(ulong addr)
+{
+	struct container_hdr *phdr;
+	int i, ret = 0;
+	int err;
+	sc_rm_mr_t mr;
+	sc_faddr_t start, end;
+	u16 length;
+	struct boot_img_t *img;
+	unsigned long s, e;
+
+	if (addr % 4) {
+		puts("Error: Image's address is not 4 byte aligned\n");
+		return -EINVAL;
+	}
+
+	if (!check_in_dram(addr)) {
+		puts("Error: Image's address is invalid\n");
+		return -EINVAL;
+	}
+
+	phdr = (struct container_hdr *)addr;
+	if (phdr->tag != 0x87 && phdr->version != 0x0) {
+		printf("Error: Wrong container header\n");
+		return -EFAULT;
+	}
+
+	if (!phdr->num_images) {
+		printf("Error: Wrong container, no image found\n");
+		return -EFAULT;
+	}
+
+	length = phdr->length_lsb + (phdr->length_msb << 8);
+
+	debug("container length %u\n", length);
+	memcpy((void *)SEC_SECURE_RAM_BASE, (const void *)addr,
+	       ALIGN(length, CONFIG_SYS_CACHELINE_SIZE));
+
+	err = sc_seco_authenticate(-1, SC_SECO_AUTH_CONTAINER,
+				   SECO_LOCAL_SEC_SEC_SECURE_RAM_BASE);
+	if (err) {
+		printf("Authenticate container hdr failed, return %d\n",
+		       err);
+		ret = -EIO;
+		goto exit;
+	}
+
+	/* Copy images to dest address */
+	for (i = 0; i < phdr->num_images; i++) {
+		img = (struct boot_img_t *)(addr +
+					    sizeof(struct container_hdr) +
+					    i * sizeof(struct boot_img_t));
+
+		debug("img %d, dst 0x%x, src 0x%lux, size 0x%x\n",
+		      i, (uint32_t) img->dst, img->offset + addr, img->size);
+
+		memcpy((void *)img->dst, (const void *)(img->offset + addr),
+		       img->size);
+
+		s = img->dst & ~(CONFIG_SYS_CACHELINE_SIZE - 1);
+		e = ALIGN(img->dst + img->size, CONFIG_SYS_CACHELINE_SIZE) - 1;
+
+		flush_dcache_range(s, e);
+
+		/* Find the memreg and set permission for seco pt */
+		err = sc_rm_find_memreg(-1, &mr, s, e);
+		if (err) {
+			printf("Error: can't find memreg for image load address 0x%llx, error %d\n", img->dst, err);
+			ret = -ENOMEM;
+			goto exit;
+		}
+
+		err = sc_rm_get_memreg_info(-1, mr, &start, &end);
+		if (!err)
+			debug("memreg %u 0x%llx -- 0x%llx\n", mr, start, end);
+
+		err = sc_rm_set_memreg_permissions(-1, mr, SECO_PT,
+						   SC_RM_PERM_FULL);
+		if (err) {
+			printf("Set permission failed for img %d, error %d\n",
+			       i, err);
+			ret = -EPERM;
+			goto exit;
+		}
+
+		err = sc_seco_authenticate(-1, SC_SECO_VERIFY_IMAGE,
+					   (1 << i));
+		if (err) {
+			printf("Authenticate img %d failed, return %d\n",
+			       i, err);
+			ret = -EIO;
+		}
+
+		err = sc_rm_set_memreg_permissions(-1, mr, SECO_PT,
+						   SC_RM_PERM_NONE);
+		if (err) {
+			printf("Remove permission failed for img %d, err %d\n",
+			       i, err);
+			ret = -EPERM;
+		}
+
+		if (ret)
+			goto exit;
+	}
+
+exit:
+	if (sc_seco_authenticate(-1, SC_SECO_REL_CONTAINER, 0) != SC_ERR_NONE)
+		printf("Error: release container failed!\n");
+
+	return ret;
+}
+
+static int do_authenticate(struct cmd_tbl *cmdtp, int flag, int argc,
+			   char *const argv[])
+{
+	ulong addr;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	addr = simple_strtoul(argv[1], NULL, 16);
+
+	printf("Authenticate OS container at 0x%lx\n", addr);
+
+	if (authenticate_os_container(addr))
+		return CMD_RET_FAILURE;
+
+	return CMD_RET_SUCCESS;
+}
+
+static void display_life_cycle(u16 lc)
+{
+	printf("Lifecycle: 0x%04X, ", lc);
+	switch (lc) {
+	case 0x1:
+		printf("Pristine\n\n");
+		break;
+	case 0x2:
+		printf("Fab\n\n");
+		break;
+	case 0x8:
+		printf("Open\n\n");
+		break;
+	case 0x20:
+		printf("NXP closed\n\n");
+		break;
+	case 0x80:
+		printf("OEM closed\n\n");
+		break;
+	case 0x100:
+		printf("Partial field return\n\n");
+		break;
+	case 0x200:
+		printf("Full field return\n\n");
+		break;
+	case 0x400:
+		printf("No return\n\n");
+		break;
+	default:
+		printf("Unknown\n\n");
+		break;
+	}
+}
+
+#define AHAB_AUTH_CONTAINER_REQ 0x87
+#define AHAB_VERIFY_IMAGE_REQ 0x88
+
+#define AHAB_NO_AUTHENTICATION_IND 0xee
+#define AHAB_BAD_KEY_HASH_IND 0xfa
+#define AHAB_INVALID_KEY_IND 0xf9
+#define AHAB_BAD_SIGNATURE_IND 0xf0
+#define AHAB_BAD_HASH_IND 0xf1
+
+static void display_ahab_auth_event(u32 event)
+{
+	u8 cmd = (event >> 16) & 0xff;
+	u8 resp_ind = (event >> 8) & 0xff;
+
+	switch (cmd) {
+	case AHAB_AUTH_CONTAINER_REQ:
+		printf("\tCMD = AHAB_AUTH_CONTAINER_REQ (0x%02X)\n", cmd);
+		printf("\tIND = ");
+		break;
+	case AHAB_VERIFY_IMAGE_REQ:
+		printf("\tCMD = AHAB_VERIFY_IMAGE_REQ (0x%02X)\n", cmd);
+		printf("\tIND = ");
+		break;
+	default:
+		return;
+	}
+
+	switch (resp_ind) {
+	case AHAB_NO_AUTHENTICATION_IND:
+		printf("AHAB_NO_AUTHENTICATION_IND (0x%02X)\n\n", resp_ind);
+		break;
+	case AHAB_BAD_KEY_HASH_IND:
+		printf("AHAB_BAD_KEY_HASH_IND (0x%02X)\n\n", resp_ind);
+		break;
+	case AHAB_INVALID_KEY_IND:
+		printf("AHAB_INVALID_KEY_IND (0x%02X)\n\n", resp_ind);
+		break;
+	case AHAB_BAD_SIGNATURE_IND:
+		printf("AHAB_BAD_SIGNATURE_IND (0x%02X)\n\n", resp_ind);
+		break;
+	case AHAB_BAD_HASH_IND:
+		printf("AHAB_BAD_HASH_IND (0x%02X)\n\n", resp_ind);
+		break;
+	default:
+		printf("Unknown Indicator (0x%02X)\n\n", resp_ind);
+		break;
+	}
+}
+
+static int do_ahab_status(struct cmd_tbl *cmdtp, int flag, int argc,
+			  char *const argv[])
+{
+	int err;
+	u8 idx = 0U;
+	u32 event;
+	u16 lc;
+
+	err = sc_seco_chip_info(-1, &lc, NULL, NULL, NULL);
+	if (err != SC_ERR_NONE) {
+		printf("Error in get lifecycle\n");
+		return -EIO;
+	}
+
+	display_life_cycle(lc);
+
+	err = sc_seco_get_event(-1, idx, &event);
+	while (err == SC_ERR_NONE) {
+		printf("SECO Event[%u] = 0x%08X\n", idx, event);
+		display_ahab_auth_event(event);
+
+		idx++;
+		err = sc_seco_get_event(-1, idx, &event);
+	}
+
+	if (idx == 0)
+		printf("No SECO Events Found!\n\n");
+
+	return 0;
+}
+
+static int confirm_close(void)
+{
+	puts("Warning: Please ensure your sample is in NXP closed state, "
+	     "OEM SRK hash has been fused, \n"
+	     "         and you are able to boot a signed image successfully "
+	     "without any SECO events reported.\n"
+	     "         If not, your sample will be unrecoverable.\n"
+	     "\nReally perform this operation? <y/N>\n");
+
+	if (confirm_yesno())
+		return 1;
+
+	puts("Ahab close aborted\n");
+	return 0;
+}
+
+static int do_ahab_close(struct cmd_tbl *cmdtp, int flag, int argc,
+			 char *const argv[])
+{
+	int confirmed = argc >= 2 && !strcmp(argv[1], "-y");
+	int err;
+	u16 lc;
+
+	if (!confirmed && !confirm_close())
+		return -EACCES;
+
+	err = sc_seco_chip_info(-1, &lc, NULL, NULL, NULL);
+	if (err != SC_ERR_NONE) {
+		printf("Error in get lifecycle\n");
+		return -EIO;
+	}
+
+	if (lc != 0x20) {
+		puts("Current lifecycle is NOT NXP closed, can't move to OEM closed\n");
+		display_life_cycle(lc);
+		return -EPERM;
+	}
+
+	err = sc_seco_forward_lifecycle(-1, 16);
+	if (err != SC_ERR_NONE) {
+		printf("Error in forward lifecycle to OEM closed\n");
+		return -EIO;
+	}
+
+	printf("Change to OEM closed successfully\n");
+
+	return 0;
+}
+
+U_BOOT_CMD(auth_cntr, CONFIG_SYS_MAXARGS, 1, do_authenticate,
+	   "autenticate OS container via AHAB",
+	   "addr\n"
+	   "addr - OS container hex address\n"
+);
+
+U_BOOT_CMD(ahab_status, CONFIG_SYS_MAXARGS, 1, do_ahab_status,
+	   "display AHAB lifecycle and events from seco",
+	   ""
+);
+
+U_BOOT_CMD(ahab_close, CONFIG_SYS_MAXARGS, 1, do_ahab_close,
+	   "Change AHAB lifecycle to OEM closed",
+	   ""
+);
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/clock.c b/roms/u-boot/arch/arm/mach-imx/imx8/clock.c
new file mode 100644
index 000000000..9941b57b4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/clock.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/global_data.h>
+#include <linux/errno.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	default:
+		printf("Unsupported mxc_clock %d\n", clk);
+		break;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/cpu.c b/roms/u-boot/arch/arm/mach-imx/imx8/cpu.c
new file mode 100644
index 000000000..02db322f5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/cpu.c
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <cpu.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <init.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/uclass.h>
+#include <errno.h>
+#include <spl.h>
+#include <thermal.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch-imx/cpu.h>
+#include <asm/armv8/cpu.h>
+#include <asm/armv8/mmu.h>
+#include <asm/setup.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define BT_PASSOVER_TAG	0x504F
+struct pass_over_info_t *get_pass_over_info(void)
+{
+	struct pass_over_info_t *p =
+		(struct pass_over_info_t *)PASS_OVER_INFO_ADDR;
+
+	if (p->barker != BT_PASSOVER_TAG ||
+	    p->len != sizeof(struct pass_over_info_t))
+		return NULL;
+
+	return p;
+}
+
+int arch_cpu_init(void)
+{
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RECOVER_DATA_SECTION)
+	spl_save_restore_data();
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+	struct pass_over_info_t *pass_over;
+
+	if (is_soc_rev(CHIP_REV_A)) {
+		pass_over = get_pass_over_info();
+		if (pass_over && pass_over->g_ap_mu == 0) {
+			/*
+			 * When ap_mu is 0, means the U-Boot booted
+			 * from first container
+			 */
+			sc_misc_boot_status(-1, SC_MISC_BOOT_STATUS_SUCCESS);
+		}
+	}
+#endif
+
+	return 0;
+}
+
+int arch_cpu_init_dm(void)
+{
+	struct udevice *devp;
+	int node, ret;
+
+	node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "fsl,imx8-mu");
+
+	ret = uclass_get_device_by_of_offset(UCLASS_MISC, node, &devp);
+	if (ret) {
+		printf("could not get scu %d\n", ret);
+		return ret;
+	}
+
+	if (is_imx8qm()) {
+		ret = sc_pm_set_resource_power_mode(-1, SC_R_SMMU,
+						    SC_PM_PW_MODE_ON);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int print_bootinfo(void)
+{
+	enum boot_device bt_dev = get_boot_device();
+
+	puts("Boot:  ");
+	switch (bt_dev) {
+	case SD1_BOOT:
+		puts("SD0\n");
+		break;
+	case SD2_BOOT:
+		puts("SD1\n");
+		break;
+	case SD3_BOOT:
+		puts("SD2\n");
+		break;
+	case MMC1_BOOT:
+		puts("MMC0\n");
+		break;
+	case MMC2_BOOT:
+		puts("MMC1\n");
+		break;
+	case MMC3_BOOT:
+		puts("MMC2\n");
+		break;
+	case FLEXSPI_BOOT:
+		puts("FLEXSPI\n");
+		break;
+	case SATA_BOOT:
+		puts("SATA\n");
+		break;
+	case NAND_BOOT:
+		puts("NAND\n");
+		break;
+	case USB_BOOT:
+		puts("USB\n");
+		break;
+	default:
+		printf("Unknown device %u\n", bt_dev);
+		break;
+	}
+
+	return 0;
+}
+
+enum boot_device get_boot_device(void)
+{
+	enum boot_device boot_dev = SD1_BOOT;
+
+	sc_rsrc_t dev_rsrc;
+
+	sc_misc_get_boot_dev(-1, &dev_rsrc);
+
+	switch (dev_rsrc) {
+	case SC_R_SDHC_0:
+		boot_dev = MMC1_BOOT;
+		break;
+	case SC_R_SDHC_1:
+		boot_dev = SD2_BOOT;
+		break;
+	case SC_R_SDHC_2:
+		boot_dev = SD3_BOOT;
+		break;
+	case SC_R_NAND:
+		boot_dev = NAND_BOOT;
+		break;
+	case SC_R_FSPI_0:
+		boot_dev = FLEXSPI_BOOT;
+		break;
+	case SC_R_SATA_0:
+		boot_dev = SATA_BOOT;
+		break;
+	case SC_R_USB_0:
+	case SC_R_USB_1:
+	case SC_R_USB_2:
+		boot_dev = USB_BOOT;
+		break;
+	default:
+		break;
+	}
+
+	return boot_dev;
+}
+
+#ifdef CONFIG_SERIAL_TAG
+#define FUSE_UNIQUE_ID_WORD0 16
+#define FUSE_UNIQUE_ID_WORD1 17
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+	sc_err_t err;
+	u32 val1 = 0, val2 = 0;
+	u32 word1, word2;
+
+	if (!serialnr)
+		return;
+
+	word1 = FUSE_UNIQUE_ID_WORD0;
+	word2 = FUSE_UNIQUE_ID_WORD1;
+
+	err = sc_misc_otp_fuse_read(-1, word1, &val1);
+	if (err != SC_ERR_NONE) {
+		printf("%s fuse %d read error: %d\n", __func__, word1, err);
+		return;
+	}
+
+	err = sc_misc_otp_fuse_read(-1, word2, &val2);
+	if (err != SC_ERR_NONE) {
+		printf("%s fuse %d read error: %d\n", __func__, word2, err);
+		return;
+	}
+	serialnr->low = val1;
+	serialnr->high = val2;
+}
+#endif /*CONFIG_SERIAL_TAG*/
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+__weak int board_mmc_get_env_dev(int devno)
+{
+	return CONFIG_SYS_MMC_ENV_DEV;
+}
+
+int mmc_get_env_dev(void)
+{
+	sc_rsrc_t dev_rsrc;
+	int devno;
+
+	sc_misc_get_boot_dev(-1, &dev_rsrc);
+
+	switch (dev_rsrc) {
+	case SC_R_SDHC_0:
+		devno = 0;
+		break;
+	case SC_R_SDHC_1:
+		devno = 1;
+		break;
+	case SC_R_SDHC_2:
+		devno = 2;
+		break;
+	default:
+		/* If not boot from sd/mmc, use default value */
+		return CONFIG_SYS_MMC_ENV_DEV;
+	}
+
+	return board_mmc_get_env_dev(devno);
+}
+#endif
+
+#define MEMSTART_ALIGNMENT  SZ_2M /* Align the memory start with 2MB */
+
+static int get_owned_memreg(sc_rm_mr_t mr, sc_faddr_t *addr_start,
+			    sc_faddr_t *addr_end)
+{
+	sc_faddr_t start, end;
+	int ret;
+	bool owned;
+
+	owned = sc_rm_is_memreg_owned(-1, mr);
+	if (owned) {
+		ret = sc_rm_get_memreg_info(-1, mr, &start, &end);
+		if (ret) {
+			printf("Memreg get info failed, %d\n", ret);
+			return -EINVAL;
+		}
+		debug("0x%llx -- 0x%llx\n", start, end);
+		*addr_start = start;
+		*addr_end = end;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+__weak void board_mem_get_layout(u64 *phys_sdram_1_start,
+				 u64 *phys_sdram_1_size,
+				 u64 *phys_sdram_2_start,
+				 u64 *phys_sdram_2_size)
+{
+	*phys_sdram_1_start = PHYS_SDRAM_1;
+	*phys_sdram_1_size = PHYS_SDRAM_1_SIZE;
+	*phys_sdram_2_start = PHYS_SDRAM_2;
+	*phys_sdram_2_size = PHYS_SDRAM_2_SIZE;
+}
+
+phys_size_t get_effective_memsize(void)
+{
+	sc_rm_mr_t mr;
+	sc_faddr_t start, end, end1, start_aligned;
+	u64 phys_sdram_1_start, phys_sdram_1_size;
+	u64 phys_sdram_2_start, phys_sdram_2_size;
+	int err;
+
+	board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
+			     &phys_sdram_2_start, &phys_sdram_2_size);
+
+
+	end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size;
+	for (mr = 0; mr < 64; mr++) {
+		err = get_owned_memreg(mr, &start, &end);
+		if (!err) {
+			start_aligned = roundup(start, MEMSTART_ALIGNMENT);
+			/* Too small memory region, not use it */
+			if (start_aligned > end)
+				continue;
+
+			/* Find the memory region runs the U-Boot */
+			if (start >= phys_sdram_1_start && start <= end1 &&
+			    (start <= CONFIG_SYS_TEXT_BASE &&
+			    end >= CONFIG_SYS_TEXT_BASE)) {
+				if ((end + 1) <=
+				    ((sc_faddr_t)phys_sdram_1_start +
+				    phys_sdram_1_size))
+					return (end - phys_sdram_1_start + 1);
+				else
+					return phys_sdram_1_size;
+			}
+		}
+	}
+
+	return phys_sdram_1_size;
+}
+
+int dram_init(void)
+{
+	sc_rm_mr_t mr;
+	sc_faddr_t start, end, end1, end2;
+	u64 phys_sdram_1_start, phys_sdram_1_size;
+	u64 phys_sdram_2_start, phys_sdram_2_size;
+	int err;
+
+	board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
+			     &phys_sdram_2_start, &phys_sdram_2_size);
+
+	end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size;
+	end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size;
+	for (mr = 0; mr < 64; mr++) {
+		err = get_owned_memreg(mr, &start, &end);
+		if (!err) {
+			start = roundup(start, MEMSTART_ALIGNMENT);
+			/* Too small memory region, not use it */
+			if (start > end)
+				continue;
+
+			if (start >= phys_sdram_1_start && start <= end1) {
+				if ((end + 1) <= end1)
+					gd->ram_size += end - start + 1;
+				else
+					gd->ram_size += end1 - start;
+			} else if (start >= phys_sdram_2_start &&
+				   start <= end2) {
+				if ((end + 1) <= end2)
+					gd->ram_size += end - start + 1;
+				else
+					gd->ram_size += end2 - start;
+			}
+		}
+	}
+
+	/* If error, set to the default value */
+	if (!gd->ram_size) {
+		gd->ram_size = phys_sdram_1_size;
+		gd->ram_size += phys_sdram_2_size;
+	}
+	return 0;
+}
+
+static void dram_bank_sort(int current_bank)
+{
+	phys_addr_t start;
+	phys_size_t size;
+
+	while (current_bank > 0) {
+		if (gd->bd->bi_dram[current_bank - 1].start >
+		    gd->bd->bi_dram[current_bank].start) {
+			start = gd->bd->bi_dram[current_bank - 1].start;
+			size = gd->bd->bi_dram[current_bank - 1].size;
+
+			gd->bd->bi_dram[current_bank - 1].start =
+				gd->bd->bi_dram[current_bank].start;
+			gd->bd->bi_dram[current_bank - 1].size =
+				gd->bd->bi_dram[current_bank].size;
+
+			gd->bd->bi_dram[current_bank].start = start;
+			gd->bd->bi_dram[current_bank].size = size;
+		}
+		current_bank--;
+	}
+}
+
+int dram_init_banksize(void)
+{
+	sc_rm_mr_t mr;
+	sc_faddr_t start, end, end1, end2;
+	int i = 0;
+	u64 phys_sdram_1_start, phys_sdram_1_size;
+	u64 phys_sdram_2_start, phys_sdram_2_size;
+	int err;
+
+	board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
+			     &phys_sdram_2_start, &phys_sdram_2_size);
+
+	end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size;
+	end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size;
+	for (mr = 0; mr < 64 && i < CONFIG_NR_DRAM_BANKS; mr++) {
+		err = get_owned_memreg(mr, &start, &end);
+		if (!err) {
+			start = roundup(start, MEMSTART_ALIGNMENT);
+			if (start > end) /* Small memory region, no use it */
+				continue;
+
+			if (start >= phys_sdram_1_start && start <= end1) {
+				gd->bd->bi_dram[i].start = start;
+
+				if ((end + 1) <= end1)
+					gd->bd->bi_dram[i].size =
+						end - start + 1;
+				else
+					gd->bd->bi_dram[i].size = end1 - start;
+
+				dram_bank_sort(i);
+				i++;
+			} else if (start >= phys_sdram_2_start && start <= end2) {
+				gd->bd->bi_dram[i].start = start;
+
+				if ((end + 1) <= end2)
+					gd->bd->bi_dram[i].size =
+						end - start + 1;
+				else
+					gd->bd->bi_dram[i].size = end2 - start;
+
+				dram_bank_sort(i);
+				i++;
+			}
+		}
+	}
+
+	/* If error, set to the default value */
+	if (!i) {
+		gd->bd->bi_dram[0].start = phys_sdram_1_start;
+		gd->bd->bi_dram[0].size = phys_sdram_1_size;
+		gd->bd->bi_dram[1].start = phys_sdram_2_start;
+		gd->bd->bi_dram[1].size = phys_sdram_2_size;
+	}
+
+	return 0;
+}
+
+static u64 get_block_attrs(sc_faddr_t addr_start)
+{
+	u64 attr = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE |
+		PTE_BLOCK_PXN | PTE_BLOCK_UXN;
+	u64 phys_sdram_1_start, phys_sdram_1_size;
+	u64 phys_sdram_2_start, phys_sdram_2_size;
+
+	board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
+			     &phys_sdram_2_start, &phys_sdram_2_size);
+
+	if ((addr_start >= phys_sdram_1_start &&
+	     addr_start <= ((sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size)) ||
+	    (addr_start >= phys_sdram_2_start &&
+	     addr_start <= ((sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size)))
+		return (PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE);
+
+	return attr;
+}
+
+static u64 get_block_size(sc_faddr_t addr_start, sc_faddr_t addr_end)
+{
+	sc_faddr_t end1, end2;
+	u64 phys_sdram_1_start, phys_sdram_1_size;
+	u64 phys_sdram_2_start, phys_sdram_2_size;
+
+	board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
+			     &phys_sdram_2_start, &phys_sdram_2_size);
+
+
+	end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size;
+	end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size;
+
+	if (addr_start >= phys_sdram_1_start && addr_start <= end1) {
+		if ((addr_end + 1) > end1)
+			return end1 - addr_start;
+	} else if (addr_start >= phys_sdram_2_start && addr_start <= end2) {
+		if ((addr_end + 1) > end2)
+			return end2 - addr_start;
+	}
+
+	return (addr_end - addr_start + 1);
+}
+
+#define MAX_PTE_ENTRIES 512
+#define MAX_MEM_MAP_REGIONS 16
+
+static struct mm_region imx8_mem_map[MAX_MEM_MAP_REGIONS];
+struct mm_region *mem_map = imx8_mem_map;
+
+void enable_caches(void)
+{
+	sc_rm_mr_t mr;
+	sc_faddr_t start, end;
+	int err, i;
+
+	/* Create map for registers access from 0x1c000000 to 0x80000000*/
+	imx8_mem_map[0].virt = 0x1c000000UL;
+	imx8_mem_map[0].phys = 0x1c000000UL;
+	imx8_mem_map[0].size = 0x64000000UL;
+	imx8_mem_map[0].attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
+
+	i = 1;
+	for (mr = 0; mr < 64 && i < MAX_MEM_MAP_REGIONS; mr++) {
+		err = get_owned_memreg(mr, &start, &end);
+		if (!err) {
+			imx8_mem_map[i].virt = start;
+			imx8_mem_map[i].phys = start;
+			imx8_mem_map[i].size = get_block_size(start, end);
+			imx8_mem_map[i].attrs = get_block_attrs(start);
+			i++;
+		}
+	}
+
+	if (i < MAX_MEM_MAP_REGIONS) {
+		imx8_mem_map[i].size = 0;
+		imx8_mem_map[i].attrs = 0;
+	} else {
+		puts("Error, need more MEM MAP REGIONS reserved\n");
+		icache_enable();
+		return;
+	}
+
+	for (i = 0; i < MAX_MEM_MAP_REGIONS; i++) {
+		debug("[%d] vir = 0x%llx phys = 0x%llx size = 0x%llx attrs = 0x%llx\n",
+		      i, imx8_mem_map[i].virt, imx8_mem_map[i].phys,
+		      imx8_mem_map[i].size, imx8_mem_map[i].attrs);
+	}
+
+	icache_enable();
+	dcache_enable();
+}
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+u64 get_page_table_size(void)
+{
+	u64 one_pt = MAX_PTE_ENTRIES * sizeof(u64);
+	u64 size = 0;
+
+	/*
+	 * For each memory region, the max table size:
+	 * 2 level 3 tables + 2 level 2 tables + 1 level 1 table
+	 */
+	size = (2 + 2 + 1) * one_pt * MAX_MEM_MAP_REGIONS + one_pt;
+
+	/*
+	 * We need to duplicate our page table once to have an emergency pt to
+	 * resort to when splitting page tables later on
+	 */
+	size *= 2;
+
+	/*
+	 * We may need to split page tables later on if dcache settings change,
+	 * so reserve up to 4 (random pick) page tables for that.
+	 */
+	size += one_pt * 4;
+
+	return size;
+}
+#endif
+
+#if defined(CONFIG_IMX8QM)
+#define FUSE_MAC0_WORD0 452
+#define FUSE_MAC0_WORD1 453
+#define FUSE_MAC1_WORD0 454
+#define FUSE_MAC1_WORD1 455
+#elif defined(CONFIG_IMX8QXP)
+#define FUSE_MAC0_WORD0 708
+#define FUSE_MAC0_WORD1 709
+#define FUSE_MAC1_WORD0 710
+#define FUSE_MAC1_WORD1 711
+#endif
+
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	u32 word[2], val[2] = {};
+	int i, ret;
+
+	if (dev_id == 0) {
+		word[0] = FUSE_MAC0_WORD0;
+		word[1] = FUSE_MAC0_WORD1;
+	} else {
+		word[0] = FUSE_MAC1_WORD0;
+		word[1] = FUSE_MAC1_WORD1;
+	}
+
+	for (i = 0; i < 2; i++) {
+		ret = sc_misc_otp_fuse_read(-1, word[i], &val[i]);
+		if (ret < 0)
+			goto err;
+	}
+
+	mac[0] = val[0];
+	mac[1] = val[0] >> 8;
+	mac[2] = val[0] >> 16;
+	mac[3] = val[0] >> 24;
+	mac[4] = val[1];
+	mac[5] = val[1] >> 8;
+
+	debug("%s: MAC%d: %02x.%02x.%02x.%02x.%02x.%02x\n",
+	      __func__, dev_id, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+	return;
+err:
+	printf("%s: fuse %d, err: %d\n", __func__, word[i], ret);
+}
+
+u32 get_cpu_rev(void)
+{
+	u32 id = 0, rev = 0;
+	int ret;
+
+	ret = sc_misc_get_control(-1, SC_R_SYSTEM, SC_C_ID, &id);
+	if (ret)
+		return 0;
+
+	rev = (id >> 5)  & 0xf;
+	id = (id & 0x1f) + MXC_SOC_IMX8;  /* Dummy ID for chip */
+
+	return (id << 12) | rev;
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+
+	if (spl_boot_list[0] == BOOT_DEVICE_SPI) {
+		/* Check whether we own the flexspi0, if not, use NOR boot */
+		if (!sc_rm_is_resource_owned(-1, SC_R_FSPI_0))
+			spl_boot_list[0] = BOOT_DEVICE_NOR;
+	}
+}
+
+bool m4_parts_booted(void)
+{
+	sc_rm_pt_t m4_parts[2];
+	int err;
+
+	err = sc_rm_get_resource_owner(-1, SC_R_M4_0_PID0, &m4_parts[0]);
+	if (err) {
+		printf("%s get resource [%d] owner error: %d\n", __func__,
+		       SC_R_M4_0_PID0, err);
+		return false;
+	}
+
+	if (sc_pm_is_partition_started(-1, m4_parts[0]))
+		return true;
+
+	if (is_imx8qm()) {
+		err = sc_rm_get_resource_owner(-1, SC_R_M4_1_PID0, &m4_parts[1]);
+		if (err) {
+			printf("%s get resource [%d] owner error: %d\n",
+			       __func__, SC_R_M4_1_PID0, err);
+			return false;
+		}
+
+		if (sc_pm_is_partition_started(-1, m4_parts[1]))
+			return true;
+	}
+
+	return false;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/fdt.c b/roms/u-boot/arch/arm/mach-imx/imx8/fdt.c
new file mode 100644
index 000000000..a132ce2e6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/fdt.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <dm/ofnode.h>
+#include <fdt_support.h>
+#include <linux/libfdt.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static bool check_owned_resource(sc_rsrc_t rsrc_id)
+{
+	bool owned;
+
+	owned = sc_rm_is_resource_owned(-1, rsrc_id);
+
+	return owned;
+}
+
+static int disable_fdt_node(void *blob, int nodeoffset)
+{
+	int rc, ret;
+	const char *status = "disabled";
+
+	do {
+		rc = fdt_setprop(blob, nodeoffset, "status", status,
+				 strlen(status) + 1);
+		if (rc) {
+			if (rc == -FDT_ERR_NOSPACE) {
+				ret = fdt_increase_size(blob, 512);
+				if (ret)
+					return ret;
+			}
+		}
+	} while (rc == -FDT_ERR_NOSPACE);
+
+	return rc;
+}
+
+static void update_fdt_with_owned_resources(void *blob)
+{
+	/*
+	 * Traverses the fdt nodes, check its power domain and use
+	 * the resource id in the power domain for checking whether
+	 * it is owned by current partition
+	 */
+	struct fdtdec_phandle_args args;
+	int offset = 0, depth = 0;
+	u32 rsrc_id;
+	int rc, i;
+
+	for (offset = fdt_next_node(blob, offset, &depth); offset > 0;
+	     offset = fdt_next_node(blob, offset, &depth)) {
+		debug("Node name: %s, depth %d\n",
+		      fdt_get_name(blob, offset, NULL), depth);
+
+		if (!fdt_get_property(blob, offset, "power-domains", NULL)) {
+			debug("   - ignoring node %s\n",
+			      fdt_get_name(blob, offset, NULL));
+			continue;
+		}
+
+		if (!fdtdec_get_is_enabled(blob, offset)) {
+			debug("   - ignoring node %s\n",
+			      fdt_get_name(blob, offset, NULL));
+			continue;
+		}
+
+		i = 0;
+		while (true) {
+			rc = fdtdec_parse_phandle_with_args(blob, offset,
+							    "power-domains",
+							    "#power-domain-cells",
+							    0, i++, &args);
+			if (rc == -ENOENT) {
+				break;
+			} else if (rc) {
+				printf("Parse power-domains of %s wrong: %d\n",
+				       fdt_get_name(blob, offset, NULL), rc);
+				continue;
+			}
+
+			rsrc_id = args.args[0];
+
+			if (!check_owned_resource(rsrc_id)) {
+				rc = disable_fdt_node(blob, offset);
+				if (!rc) {
+					printf("Disable %s rsrc %u not owned\n",
+					       fdt_get_name(blob, offset, NULL),
+					       rsrc_id);
+				} else {
+					printf("Unable to disable %s, err=%s\n",
+					       fdt_get_name(blob, offset, NULL),
+					       fdt_strerror(rc));
+				}
+			}
+		}
+	}
+}
+
+static int config_smmu_resource_sid(int rsrc, int sid)
+{
+	int err;
+
+	err = sc_rm_set_master_sid(-1, rsrc, sid);
+	debug("set_master_sid rsrc=%d sid=0x%x err=%d\n", rsrc, sid, err);
+	if (err != SC_ERR_NONE) {
+		if (!check_owned_resource(rsrc)) {
+			printf("%s rsrc[%d] not owned\n", __func__, rsrc);
+			return -1;
+		}
+		pr_err("fail set_master_sid rsrc=%d sid=0x%x err=%d\n", rsrc, sid, err);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int config_smmu_fdt_device_sid(void *blob, int device_offset, int sid)
+{
+	const char *name = fdt_get_name(blob, device_offset, NULL);
+	struct fdtdec_phandle_args args;
+	int rsrc, ret;
+	int proplen;
+	const fdt32_t *prop;
+	int i;
+
+	prop = fdt_getprop(blob, device_offset, "fsl,sc_rsrc_id", &proplen);
+	if (prop) {
+		int i;
+
+		debug("configure node %s sid 0x%x for %d resources\n",
+		      name, sid, (int)(proplen / sizeof(fdt32_t)));
+		for (i = 0; i < proplen / sizeof(fdt32_t); ++i) {
+			ret = config_smmu_resource_sid(fdt32_to_cpu(prop[i]),
+						       sid);
+			if (ret)
+				return ret;
+		}
+
+		return 0;
+	}
+
+	i = 0;
+	while (true) {
+		ret = fdtdec_parse_phandle_with_args(blob, device_offset,
+						     "power-domains",
+						     "#power-domain-cells",
+						     0, i++, &args);
+		if (ret == -ENOENT) {
+			break;
+		} else if (ret) {
+			printf("Parse power-domains of node %s wrong: %d\n",
+			       fdt_get_name(blob, device_offset, NULL), ret);
+			continue;
+		}
+
+		debug("configure node %s sid 0x%x rsrc=%d\n",
+		      name, sid, rsrc);
+		rsrc = args.args[0];
+
+		ret = config_smmu_resource_sid(rsrc, sid);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int config_smmu_fdt(void *blob)
+{
+	int offset, proplen, i, ret;
+	const fdt32_t *prop;
+	const char *name;
+
+	/* Legacy smmu bindings, still used by xen. */
+	offset = fdt_node_offset_by_compatible(blob, 0, "arm,mmu-500");
+	prop = fdt_getprop(blob, offset, "mmu-masters", &proplen);
+	if (offset > 0 && prop) {
+		debug("found legacy mmu-masters property\n");
+
+		for (i = 0; i < proplen / 8; ++i) {
+			u32 phandle = fdt32_to_cpu(prop[2 * i]);
+			int sid = fdt32_to_cpu(prop[2 * i + 1]);
+			int device_offset;
+
+			device_offset = fdt_node_offset_by_phandle(blob,
+								   phandle);
+			if (device_offset < 0) {
+				pr_err("Not find device from mmu_masters: %d",
+				       device_offset);
+				continue;
+			}
+			ret = config_smmu_fdt_device_sid(blob, device_offset,
+							 sid);
+			if (ret)
+				return ret;
+		}
+
+		/* Ignore new bindings if old bindings found, just like linux. */
+		return 0;
+	}
+
+	/* Generic smmu bindings */
+	offset = 0;
+	while ((offset = fdt_next_node(blob, offset, NULL)) > 0) {
+		name = fdt_get_name(blob, offset, NULL);
+		prop = fdt_getprop(blob, offset, "iommus", &proplen);
+		if (!prop)
+			continue;
+		debug("node %s iommus proplen %d\n", name, proplen);
+
+		if (proplen == 12) {
+			int sid = fdt32_to_cpu(prop[1]);
+
+			config_smmu_fdt_device_sid(blob, offset, sid);
+		} else if (proplen != 4) {
+			debug("node %s ignore unexpected iommus proplen=%d\n",
+			      name, proplen);
+		}
+	}
+
+	return 0;
+}
+
+static int ft_add_optee_node(void *fdt, struct bd_info *bd)
+{
+	const char *path, *subpath;
+	int offs;
+
+	/*
+	 * No TEE space allocated indicating no TEE running, so no
+	 * need to add optee node in dts
+	 */
+	if (!boot_pointer[1])
+		return 0;
+
+	offs = fdt_increase_size(fdt, 512);
+	if (offs) {
+		printf("No Space for dtb\n");
+		return 1;
+	}
+
+	path = "/firmware";
+	offs = fdt_path_offset(fdt, path);
+	if (offs < 0) {
+		path = "/";
+		offs = fdt_path_offset(fdt, path);
+
+		if (offs < 0) {
+			printf("Could not find root node.\n");
+			return offs;
+		}
+
+		subpath = "firmware";
+		offs = fdt_add_subnode(fdt, offs, subpath);
+		if (offs < 0) {
+			printf("Could not create %s node.\n", subpath);
+			return offs;
+		}
+	}
+
+	subpath = "optee";
+	offs = fdt_add_subnode(fdt, offs, subpath);
+	if (offs < 0) {
+		printf("Could not create %s node.\n", subpath);
+		return offs;
+	}
+
+	fdt_setprop_string(fdt, offs, "compatible", "linaro,optee-tz");
+	fdt_setprop_string(fdt, offs, "method", "smc");
+
+	return 0;
+}
+
+int ft_system_setup(void *blob, struct bd_info *bd)
+{
+	int ret;
+	int off;
+
+	if (CONFIG_BOOTAUX_RESERVED_MEM_BASE) {
+		off = fdt_add_mem_rsv(blob, CONFIG_BOOTAUX_RESERVED_MEM_BASE,
+				      CONFIG_BOOTAUX_RESERVED_MEM_SIZE);
+		if (off < 0)
+			printf("Failed	to reserve memory for bootaux: %s\n",
+			       fdt_strerror(off));
+	}
+
+	update_fdt_with_owned_resources(blob);
+
+	if (is_imx8qm()) {
+		ret = config_smmu_fdt(blob);
+		if (ret)
+			return ret;
+	}
+
+	return ft_add_optee_node(blob, bd);
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/image.c b/roms/u-boot/arch/arm/mach-imx/imx8/image.c
new file mode 100644
index 000000000..5abc0d3a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/image.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <log.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <mmc.h>
+#include <spi_flash.h>
+#include <nand.h>
+#include <asm/arch/image.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+
+#define MMC_DEV		0
+#define QSPI_DEV	1
+#define NAND_DEV	2
+#define QSPI_NOR_DEV	3
+
+static int __get_container_size(ulong addr)
+{
+	struct container_hdr *phdr;
+	struct boot_img_t *img_entry;
+	struct signature_block_hdr *sign_hdr;
+	u8 i = 0;
+	u32 max_offset = 0, img_end;
+
+	phdr = (struct container_hdr *)addr;
+	if (phdr->tag != 0x87 && phdr->version != 0x0) {
+		debug("Wrong container header\n");
+		return -EFAULT;
+	}
+
+	max_offset = sizeof(struct container_hdr);
+
+	img_entry = (struct boot_img_t *)(addr + sizeof(struct container_hdr));
+	for (i = 0; i < phdr->num_images; i++) {
+		img_end = img_entry->offset + img_entry->size;
+		if (img_end > max_offset)
+			max_offset = img_end;
+
+		debug("img[%u], end = 0x%x\n", i, img_end);
+
+		img_entry++;
+	}
+
+	if (phdr->sig_blk_offset != 0) {
+		sign_hdr = (struct signature_block_hdr *)(addr + phdr->sig_blk_offset);
+		u16 len = sign_hdr->length_lsb + (sign_hdr->length_msb << 8);
+
+		if (phdr->sig_blk_offset + len > max_offset)
+			max_offset = phdr->sig_blk_offset + len;
+
+		debug("sigblk, end = 0x%x\n", phdr->sig_blk_offset + len);
+	}
+
+	return max_offset;
+}
+
+static int get_container_size(void *dev, int dev_type, unsigned long offset)
+{
+	u8 *buf = malloc(CONTAINER_HDR_ALIGNMENT);
+	int ret = 0;
+
+	if (!buf) {
+		printf("Malloc buffer failed\n");
+		return -ENOMEM;
+	}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	if (dev_type == MMC_DEV) {
+		unsigned long count = 0;
+		struct mmc *mmc = (struct mmc *)dev;
+
+		count = blk_dread(mmc_get_blk_desc(mmc),
+				  offset / mmc->read_bl_len,
+				  CONTAINER_HDR_ALIGNMENT / mmc->read_bl_len,
+				  buf);
+		if (count == 0) {
+			printf("Read container image from MMC/SD failed\n");
+			return -EIO;
+		}
+	}
+#endif
+
+#ifdef CONFIG_SPL_SPI_LOAD
+	if (dev_type == QSPI_DEV) {
+		struct spi_flash *flash = (struct spi_flash *)dev;
+
+		ret = spi_flash_read(flash, offset,
+				     CONTAINER_HDR_ALIGNMENT, buf);
+		if (ret != 0) {
+			printf("Read container image from QSPI failed\n");
+			return -EIO;
+		}
+	}
+#endif
+
+#ifdef CONFIG_SPL_NAND_SUPPORT
+	if (dev_type == NAND_DEV) {
+		ret = nand_spl_load_image(offset, CONTAINER_HDR_ALIGNMENT,
+					  buf);
+		if (ret != 0) {
+			printf("Read container image from NAND failed\n");
+			return -EIO;
+		}
+	}
+#endif
+
+#ifdef CONFIG_SPL_NOR_SUPPORT
+	if (dev_type == QSPI_NOR_DEV)
+		memcpy(buf, (const void *)offset, CONTAINER_HDR_ALIGNMENT);
+#endif
+
+	ret = __get_container_size((ulong)buf);
+
+	free(buf);
+
+	return ret;
+}
+
+static unsigned long get_boot_device_offset(void *dev, int dev_type)
+{
+	unsigned long offset = 0;
+
+	if (dev_type == MMC_DEV) {
+		struct mmc *mmc = (struct mmc *)dev;
+
+		if (IS_SD(mmc) || mmc->part_config == MMCPART_NOAVAILABLE) {
+			offset = CONTAINER_HDR_MMCSD_OFFSET;
+		} else {
+			u8 part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
+
+			if (part == 1 || part == 2) {
+				if (is_imx8qxp() && is_soc_rev(CHIP_REV_B))
+					offset = CONTAINER_HDR_MMCSD_OFFSET;
+				else
+					offset = CONTAINER_HDR_EMMC_OFFSET;
+			} else {
+				offset = CONTAINER_HDR_MMCSD_OFFSET;
+			}
+		}
+	} else if (dev_type == QSPI_DEV) {
+		offset = CONTAINER_HDR_QSPI_OFFSET;
+	} else if (dev_type == NAND_DEV) {
+		offset = CONTAINER_HDR_NAND_OFFSET;
+	} else if (dev_type == QSPI_NOR_DEV) {
+		offset = CONTAINER_HDR_QSPI_OFFSET + 0x08000000;
+	}
+
+	return offset;
+}
+
+static int get_imageset_end(void *dev, int dev_type)
+{
+	unsigned long offset1 = 0, offset2 = 0;
+	int value_container[2];
+
+	offset1 = get_boot_device_offset(dev, dev_type);
+	offset2 = CONTAINER_HDR_ALIGNMENT + offset1;
+
+	value_container[0] = get_container_size(dev, dev_type, offset1);
+	if (value_container[0] < 0) {
+		printf("Parse seco container failed %d\n", value_container[0]);
+		return value_container[0];
+	}
+
+	debug("seco container size 0x%x\n", value_container[0]);
+
+	value_container[1] = get_container_size(dev, dev_type, offset2);
+	if (value_container[1] < 0) {
+		debug("Parse scu container failed %d, only seco container\n",
+		      value_container[1]);
+		/* return seco container total size */
+		return value_container[0] + offset1;
+	}
+
+	debug("scu container size 0x%x\n", value_container[1]);
+
+	return value_container[1] + offset2;
+}
+
+#ifdef CONFIG_SPL_SPI_LOAD
+unsigned long spl_spi_get_uboot_offs(struct spi_flash *flash)
+{
+	int end;
+
+	end = get_imageset_end(flash, QSPI_DEV);
+	end = ROUND(end, SZ_1K);
+
+	printf("Load image from QSPI 0x%x\n", end);
+
+	return end;
+}
+#endif
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
+					   unsigned long raw_sect)
+{
+	int end;
+
+	end = get_imageset_end(mmc, MMC_DEV);
+	end = ROUND(end, SZ_1K);
+
+	printf("Load image from MMC/SD 0x%x\n", end);
+
+	return end / mmc->read_bl_len;
+}
+#endif
+
+#ifdef CONFIG_SPL_NAND_SUPPORT
+uint32_t spl_nand_get_uboot_raw_page(void)
+{
+	int end;
+
+	end = get_imageset_end((void *)NULL, NAND_DEV);
+	end = ROUND(end, SZ_16K);
+
+	printf("Load image from NAND 0x%x\n", end);
+
+	return end;
+}
+#endif
+
+#ifdef CONFIG_SPL_NOR_SUPPORT
+unsigned long spl_nor_get_uboot_base(void)
+{
+	int end;
+
+	/* Calculate the image set end,
+	 * if it is less than CONFIG_SYS_UBOOT_BASE(0x8281000),
+	 * we use CONFIG_SYS_UBOOT_BASE
+	 * Otherwise, use the calculated address
+	 */
+	end = get_imageset_end((void *)NULL, QSPI_NOR_DEV);
+	if (end <= CONFIG_SYS_UBOOT_BASE)
+		end = CONFIG_SYS_UBOOT_BASE;
+	else
+		end = ROUND(end, SZ_1K);
+
+	printf("Load image from NOR 0x%x\n", end);
+
+	return end;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/iomux.c b/roms/u-boot/arch/arm/mach-imx/imx8/iomux.c
new file mode 100644
index 000000000..9c3cfbf00
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/iomux.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sci/sci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * configures a single pad in the iomuxer
+ */
+void imx8_iomux_setup_pad(iomux_cfg_t pad)
+{
+	sc_pad_t pin_id = pad & PIN_ID_MASK;
+	int ret;
+
+	u32 val = (u32)((pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT);
+
+	val |= PADRING_IFMUX_EN_MASK;
+	val |= PADRING_GP_EN_MASK;
+
+	ret = sc_pad_set(-1, pin_id, val);
+	if (ret)
+		printf("sc_pad_set failed!, pin: %u, val: 0x%x\n", pin_id, val);
+
+	debug("iomux: pin %d, val = 0x%x\n", pin_id, val);
+}
+
+/* configures a list of pads within declared with IOMUX_PADS macro */
+void imx8_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list, u32 count)
+{
+	iomux_cfg_t const *p = pad_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		imx8_iomux_setup_pad(*p);
+		p++;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/lowlevel_init.S b/roms/u-boot/arch/arm/mach-imx/imx8/lowlevel_init.S
new file mode 100644
index 000000000..a66243c5e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/lowlevel_init.S
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <config.h>
+
+.align 8
+.global boot_pointer
+boot_pointer:
+	.space 32
+
+/*
+ * Routine: save_boot_params (called after reset from start.S)
+ */
+
+.global save_boot_params
+save_boot_params:
+	/* The firmware provided ATAG/FDT address can be found in r2/x0 */
+	adr	x0, boot_pointer
+	stp	x1, x2, [x0], #16
+	stp	x3, x4, [x0], #16
+
+	/*
+	 * We use absolute address not PC relative address for return.
+	 * When running SPL on iMX8, the A core starts at address 0,
+	 * an alias to OCRAM 0x100000, our linker address for SPL is
+	 * from 0x100000. So using absolute address can jump to the OCRAM
+	 * address from the alias. The alias only map first 96KB of OCRAM,
+	 * so this require the SPL size can't beyond 96KB.
+	 * But when using SPL DM, the size increase significantly and
+	 * always beyonds 96KB. That's why we have to jump to OCRAM.
+	 * Normal u-boot also runs into this codes, but there is no impact.
+	 */
+	ldr	x1, =save_boot_params_ret
+	br	x1
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/misc.c b/roms/u-boot/arch/arm/mach-imx/imx8/misc.c
new file mode 100644
index 000000000..de19955e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/misc.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <common.h>
+#include <log.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/mach-imx/sys_proto.h>
+#include <imx_sip.h>
+#include <linux/arm-smccc.h>
+
+int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
+{
+	sc_pm_clock_rate_t rate = clk_rate;
+	int ret;
+
+	/* Power up UARTn */
+	ret = sc_pm_set_resource_power_mode(-1, uart_rsrc, SC_PM_PW_MODE_ON);
+	if (ret)
+		return ret;
+
+	/* Set UARTn clock root to 'rate' MHz */
+	ret = sc_pm_set_clock_rate(-1, uart_rsrc, SC_PM_CLK_PER, &rate);
+	if (ret)
+		return ret;
+
+	/* Enable UARTn clock root */
+	ret = sc_pm_clock_enable(-1, uart_rsrc, SC_PM_CLK_PER, true, false);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+void build_info(void)
+{
+	struct arm_smccc_res res;
+	u32 seco_build = 0, seco_commit = 0;
+	u32 sc_build = 0, sc_commit = 0;
+	ulong atf_commit = 0;
+
+	/* Get SCFW build and commit id */
+	sc_misc_build_info(-1, &sc_build, &sc_commit);
+	if (!sc_build) {
+		printf("SCFW does not support build info\n");
+		sc_commit = 0; /* Display 0 if build info not supported */
+	}
+
+	/* Get SECO FW build and commit id */
+	sc_seco_build_info(-1, &seco_build, &seco_commit);
+	if (!seco_build) {
+		debug("SECO FW does not support build info\n");
+		/* Display 0 when the build info is not supported */
+		seco_commit = 0;
+	}
+
+	/* Get ARM Trusted Firmware commit id */
+	arm_smccc_smc(IMX_SIP_BUILDINFO, IMX_SIP_BUILDINFO_GET_COMMITHASH,
+		      0, 0, 0, 0, 0, 0, &res);
+	atf_commit = res.a0;
+	if (atf_commit == 0xffffffff) {
+		debug("ATF does not support build info\n");
+		atf_commit = 0x30; /* Display 0 */
+	}
+
+	printf("Build: SCFW %08x, SECO-FW %08x, ATF %s\n",
+	       sc_commit, seco_commit, (char *)&atf_commit);
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/parse-container.c b/roms/u-boot/arch/arm/mach-imx/imx8/parse-container.c
new file mode 100644
index 000000000..375098902
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/parse-container.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/arch/image.h>
+#include <asm/arch/sci/sci.h>
+
+#define SEC_SECURE_RAM_BASE		0x31800000UL
+#define SEC_SECURE_RAM_END_BASE		(SEC_SECURE_RAM_BASE + 0xFFFFUL)
+#define SECO_LOCAL_SEC_SEC_SECURE_RAM_BASE	0x60000000UL
+
+#define SECO_PT         2U
+
+#ifdef CONFIG_AHAB_BOOT
+static int authenticate_image(struct boot_img_t *img, int image_index)
+{
+	sc_faddr_t start, end;
+	sc_rm_mr_t mr;
+	int err;
+	int ret = 0;
+
+	debug("img %d, dst 0x%x, src 0x%x, size 0x%x\n",
+	      image_index, (uint32_t)img->dst, img->offset, img->size);
+
+	/* Find the memreg and set permission for seco pt */
+	err = sc_rm_find_memreg(-1, &mr,
+				img->dst & ~(CONFIG_SYS_CACHELINE_SIZE - 1),
+				ALIGN(img->dst + img->size, CONFIG_SYS_CACHELINE_SIZE) - 1);
+
+	if (err) {
+		printf("can't find memreg for image %d load address 0x%x, error %d\n",
+		       image_index, img->dst & ~(CONFIG_SYS_CACHELINE_SIZE - 1), err);
+		return -ENOMEM;
+	}
+
+	err = sc_rm_get_memreg_info(-1, mr, &start, &end);
+	if (!err)
+		debug("memreg %u 0x%x -- 0x%x\n", mr, start, end);
+
+	err = sc_rm_set_memreg_permissions(-1, mr,
+					   SECO_PT, SC_RM_PERM_FULL);
+	if (err) {
+		printf("set permission failed for img %d, error %d\n",
+		       image_index, err);
+		return -EPERM;
+	}
+
+	err = sc_seco_authenticate(-1, SC_SECO_VERIFY_IMAGE,
+				   1 << image_index);
+	if (err) {
+		printf("authenticate img %d failed, return %d\n",
+		       image_index, err);
+		ret = -EIO;
+	}
+
+	err = sc_rm_set_memreg_permissions(-1, mr,
+					   SECO_PT, SC_RM_PERM_NONE);
+	if (err) {
+		printf("remove permission failed for img %d, error %d\n",
+		       image_index, err);
+		ret = -EPERM;
+	}
+
+	return ret;
+}
+#endif
+
+static struct boot_img_t *read_auth_image(struct spl_image_info *spl_image,
+					  struct spl_load_info *info,
+					  struct container_hdr *container,
+					  int image_index,
+					  u32 container_sector)
+{
+	struct boot_img_t *images;
+	ulong sector;
+	u32 sectors;
+
+	if (image_index > container->num_images) {
+		debug("Invalid image number\n");
+		return NULL;
+	}
+
+	images = (struct boot_img_t *)((u8 *)container +
+				       sizeof(struct container_hdr));
+
+	if (images[image_index].offset % info->bl_len) {
+		printf("%s: image%d offset not aligned to %u\n",
+		       __func__, image_index, info->bl_len);
+		return NULL;
+	}
+
+	sectors = roundup(images[image_index].size, info->bl_len) /
+		info->bl_len;
+	sector = images[image_index].offset / info->bl_len +
+		container_sector;
+
+	debug("%s: container: %p sector: %lu sectors: %u\n", __func__,
+	      container, sector, sectors);
+	if (info->read(info, sector, sectors,
+		       (void *)images[image_index].entry) != sectors) {
+		printf("%s wrong\n", __func__);
+		return NULL;
+	}
+
+#ifdef CONFIG_AHAB_BOOT
+	if (authenticate_image(&images[image_index], image_index)) {
+		printf("Failed to authenticate image %d\n", image_index);
+		return NULL;
+	}
+#endif
+
+	return &images[image_index];
+}
+
+static int read_auth_container(struct spl_image_info *spl_image,
+			       struct spl_load_info *info, ulong sector)
+{
+	struct container_hdr *container = NULL;
+	u16 length;
+	u32 sectors;
+	int i, size, ret = 0;
+
+	size = roundup(CONTAINER_HDR_ALIGNMENT, info->bl_len);
+	sectors = size / info->bl_len;
+
+	/*
+	 * It will not override the ATF code, so safe to use it here,
+	 * no need malloc
+	 */
+	container = (struct container_hdr *)spl_get_load_buffer(-size, size);
+
+	debug("%s: container: %p sector: %lu sectors: %u\n", __func__,
+	      container, sector, sectors);
+	if (info->read(info, sector, sectors, container) != sectors)
+		return -EIO;
+
+	if (container->tag != 0x87 && container->version != 0x0) {
+		printf("Wrong container header");
+		return -ENOENT;
+	}
+
+	if (!container->num_images) {
+		printf("Wrong container, no image found");
+		return -ENOENT;
+	}
+
+	length = container->length_lsb + (container->length_msb << 8);
+	debug("Container length %u\n", length);
+
+	if (length > CONTAINER_HDR_ALIGNMENT) {
+		size = roundup(length, info->bl_len);
+		sectors = size / info->bl_len;
+
+		container = (struct container_hdr *)spl_get_load_buffer(-size, size);
+
+		debug("%s: container: %p sector: %lu sectors: %u\n",
+		      __func__, container, sector, sectors);
+		if (info->read(info, sector, sectors, container) !=
+		    sectors)
+			return -EIO;
+	}
+
+#ifdef CONFIG_AHAB_BOOT
+	memcpy((void *)SEC_SECURE_RAM_BASE, (const void *)container,
+	       ALIGN(length, CONFIG_SYS_CACHELINE_SIZE));
+
+	ret = sc_seco_authenticate(-1, SC_SECO_AUTH_CONTAINER,
+				   SECO_LOCAL_SEC_SEC_SECURE_RAM_BASE);
+	if (ret) {
+		printf("authenticate container hdr failed, return %d\n", ret);
+		return ret;
+	}
+#endif
+
+	for (i = 0; i < container->num_images; i++) {
+		struct boot_img_t *image = read_auth_image(spl_image, info,
+							   container, i,
+							   sector);
+
+		if (!image) {
+			ret = -EINVAL;
+			goto end_auth;
+		}
+
+		if (i == 0) {
+			spl_image->load_addr = image->dst;
+			spl_image->entry_point = image->entry;
+		}
+	}
+
+end_auth:
+#ifdef CONFIG_AHAB_BOOT
+	if (sc_seco_authenticate(-1, SC_SECO_REL_CONTAINER, 0))
+		printf("Error: release container failed!\n");
+#endif
+	return ret;
+}
+
+int spl_load_imx_container(struct spl_image_info *spl_image,
+			   struct spl_load_info *info, ulong sector)
+{
+	return read_auth_container(spl_image, info, sector);
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8/snvs_security_sc.c b/roms/u-boot/arch/arm/mach-imx/imx8/snvs_security_sc.c
new file mode 100644
index 000000000..6f9b1c99f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8/snvs_security_sc.c
@@ -0,0 +1,925 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2020 NXP.
+ */
+
+/*
+ * Configuration of the Tamper pins in different mode:
+ *  - default (no tamper pins): _default_
+ *  - passive mode expecting VCC on the line: "_passive_vcc_"
+ *  - passive mode expecting VCC on the line: "_passive_gnd_"
+ *  - active mode: "_active_"
+ */
+
+#include <command.h>
+#include <log.h>
+#include <stddef.h>
+#include <common.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch-imx8/imx8-pins.h>
+#include <asm/arch-imx8/snvs_security_sc.h>
+#include <asm/global_data.h>
+
+/* Access to gd */
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SC_WRITE_CONF 1
+
+#define PGD_HEX_VALUE 0x41736166
+#define SRTC_EN 0x1
+#define DP_EN BIT(5)
+
+struct snvs_security_sc_conf {
+	struct snvs_hp_conf {
+		u32 lock;		/* HPLR - HP Lock */
+		u32 __cmd;		/* HPCOMR - HP Command */
+		u32 __ctl;		/* HPCR - HP Control */
+		u32 secvio_intcfg;	/* HPSICR - Security Violation Int
+					 * Config
+					 */
+		u32 secvio_ctl;		/* HPSVCR - Security Violation Control*/
+		u32 status;		/* HPSR - HP Status */
+		u32 secvio_status;	/* HPSVSR - Security Violation Status */
+		u32 __ha_counteriv;	/* High Assurance Counter IV */
+		u32 __ha_counter;		/* High Assurance Counter */
+		u32 __rtc_msb;		/* Real Time Clock/Counter MSB */
+		u32 __rtc_lsb;		/* Real Time Counter LSB */
+		u32 __time_alarm_msb;	/* Time Alarm MSB */
+		u32 __time_alarm_lsb;	/* Time Alarm LSB */
+	} hp;
+	struct snvs_lp_conf {
+		u32 lock;
+		u32 __ctl;
+		u32 __mstr_key_ctl;	/* Master Key Control */
+		u32 secvio_ctl;		/* Security Violation Control */
+		u32 tamper_filt_cfg;	/* Tamper Glitch Filters Configuration*/
+		u32 tamper_det_cfg;	/* Tamper Detectors Configuration */
+		u32 status;
+		u32 __srtc_msb;		/* Secure Real Time Clock/Counter MSB */
+		u32 __srtc_lsb;		/* Secure Real Time Clock/Counter LSB */
+		u32 __time_alarm;		/* Time Alarm */
+		u32 __smc_msb;		/* Secure Monotonic Counter MSB */
+		u32 __smc_lsb;		/* Secure Monotonic Counter LSB */
+		u32 __pwr_glitch_det;	/* Power Glitch Detector */
+		u32 __gen_purpose;
+		u8 __zmk[32];		/* Zeroizable Master Key */
+		u32 __rsvd0;
+		u32 __gen_purposes[4];	/* gp0_30 to gp0_33 */
+		u32 tamper_det_cfg2;	/* Tamper Detectors Configuration2 */
+		u32 tamper_det_status;	/* Tamper Detectors status */
+		u32 tamper_filt1_cfg;	/* Tamper Glitch Filter1 Configuration*/
+		u32 tamper_filt2_cfg;	/* Tamper Glitch Filter2 Configuration*/
+		u32 __rsvd1[4];
+		u32 act_tamper1_cfg;	/* Active Tamper1 Configuration */
+		u32 act_tamper2_cfg;	/* Active Tamper2 Configuration */
+		u32 act_tamper3_cfg;	/* Active Tamper3 Configuration */
+		u32 act_tamper4_cfg;	/* Active Tamper4 Configuration */
+		u32 act_tamper5_cfg;	/* Active Tamper5 Configuration */
+		u32 __rsvd2[3];
+		u32 act_tamper_ctl;	/* Active Tamper Control */
+		u32 act_tamper_clk_ctl;	/* Active Tamper Clock Control */
+		u32 act_tamper_routing_ctl1;/* Active Tamper Routing Control1 */
+		u32 act_tamper_routing_ctl2;/* Active Tamper Routing Control2 */
+	} lp;
+};
+
+static struct snvs_security_sc_conf snvs_default_config = {
+	.hp = {
+		.lock = 0x1f0703ff,
+		.secvio_ctl = 0x3000007f,
+	},
+	.lp = {
+		.lock = 0x1f0003ff,
+		.secvio_ctl = 0x36,
+		.tamper_filt_cfg = 0,
+		.tamper_det_cfg = 0x76, /* analogic tampers
+					 * + rollover tampers
+					 */
+		.tamper_det_cfg2 = 0,
+		.tamper_filt1_cfg = 0,
+		.tamper_filt2_cfg = 0,
+		.act_tamper1_cfg = 0,
+		.act_tamper2_cfg = 0,
+		.act_tamper3_cfg = 0,
+		.act_tamper4_cfg = 0,
+		.act_tamper5_cfg = 0,
+		.act_tamper_ctl = 0,
+		.act_tamper_clk_ctl = 0,
+		.act_tamper_routing_ctl1 = 0,
+		.act_tamper_routing_ctl2 = 0,
+	}
+};
+
+static struct snvs_security_sc_conf snvs_passive_vcc_config = {
+	.hp = {
+		.lock = 0x1f0703ff,
+		.secvio_ctl = 0x3000007f,
+	},
+	.lp = {
+		.lock = 0x1f0003ff,
+		.secvio_ctl = 0x36,
+		.tamper_filt_cfg = 0,
+		.tamper_det_cfg = 0x276, /* ET1 will trig on line at GND
+					  *  + analogic tampers
+					  *  + rollover tampers
+					  */
+		.tamper_det_cfg2 = 0,
+		.tamper_filt1_cfg = 0,
+		.tamper_filt2_cfg = 0,
+		.act_tamper1_cfg = 0,
+		.act_tamper2_cfg = 0,
+		.act_tamper3_cfg = 0,
+		.act_tamper4_cfg = 0,
+		.act_tamper5_cfg = 0,
+		.act_tamper_ctl = 0,
+		.act_tamper_clk_ctl = 0,
+		.act_tamper_routing_ctl1 = 0,
+		.act_tamper_routing_ctl2 = 0,
+	}
+};
+
+static struct snvs_security_sc_conf snvs_passive_gnd_config = {
+	.hp = {
+		.lock = 0x1f0703ff,
+		.secvio_ctl = 0x3000007f,
+	},
+	.lp = {
+		.lock = 0x1f0003ff,
+		.secvio_ctl = 0x36,
+		.tamper_filt_cfg = 0,
+		.tamper_det_cfg = 0xa76, /* ET1 will trig on line at VCC
+					  *  + analogic tampers
+					  *  + rollover tampers
+					  */
+		.tamper_det_cfg2 = 0,
+		.tamper_filt1_cfg = 0,
+		.tamper_filt2_cfg = 0,
+		.act_tamper1_cfg = 0,
+		.act_tamper2_cfg = 0,
+		.act_tamper3_cfg = 0,
+		.act_tamper4_cfg = 0,
+		.act_tamper5_cfg = 0,
+		.act_tamper_ctl = 0,
+		.act_tamper_clk_ctl = 0,
+		.act_tamper_routing_ctl1 = 0,
+		.act_tamper_routing_ctl2 = 0,
+	}
+};
+
+static struct snvs_security_sc_conf snvs_active_config = {
+	.hp = {
+		.lock = 0x1f0703ff,
+		.secvio_ctl = 0x3000007f,
+	},
+	.lp = {
+		.lock = 0x1f0003ff,
+		.secvio_ctl = 0x36,
+		.tamper_filt_cfg = 0x00800000, /* Enable filtering */
+		.tamper_det_cfg = 0x276, /* ET1 enabled + analogic tampers
+					  *  + rollover tampers
+					  */
+		.tamper_det_cfg2 = 0,
+		.tamper_filt1_cfg = 0,
+		.tamper_filt2_cfg = 0,
+		.act_tamper1_cfg = 0x84001111,
+		.act_tamper2_cfg = 0,
+		.act_tamper3_cfg = 0,
+		.act_tamper4_cfg = 0,
+		.act_tamper5_cfg = 0,
+		.act_tamper_ctl = 0x00010001,
+		.act_tamper_clk_ctl = 0,
+		.act_tamper_routing_ctl1 = 0x1,
+		.act_tamper_routing_ctl2 = 0,
+	}
+};
+
+static struct snvs_security_sc_conf *get_snvs_config(void)
+{
+	return &snvs_default_config;
+}
+
+struct snvs_dgo_conf {
+	u32 tamper_offset_ctl;
+	u32 tamper_pull_ctl;
+	u32 tamper_ana_test_ctl;
+	u32 tamper_sensor_trim_ctl;
+	u32 tamper_misc_ctl;
+	u32 tamper_core_volt_mon_ctl;
+};
+
+static struct snvs_dgo_conf snvs_dgo_default_config = {
+	.tamper_misc_ctl = 0x80000000, /* Lock the DGO */
+};
+
+static struct snvs_dgo_conf snvs_dgo_passive_vcc_config = {
+	.tamper_misc_ctl = 0x80000000, /* Lock the DGO */
+	.tamper_pull_ctl = 0x00000001, /* Pull down ET1 */
+	.tamper_ana_test_ctl = 0x20000000, /* Enable tamper */
+};
+
+static struct snvs_dgo_conf snvs_dgo_passive_gnd_config = {
+	.tamper_misc_ctl = 0x80000000, /* Lock the DGO */
+	.tamper_pull_ctl = 0x00000401, /* Pull up ET1 */
+	.tamper_ana_test_ctl = 0x20000000, /* Enable tamper */
+};
+
+static struct snvs_dgo_conf snvs_dgo_active_config = {
+	.tamper_misc_ctl = 0x80000000, /* Lock the DGO */
+	.tamper_ana_test_ctl = 0x20000000, /* Enable tamper */
+};
+
+static struct snvs_dgo_conf *get_snvs_dgo_config(void)
+{
+	return &snvs_dgo_default_config;
+}
+
+struct tamper_pin_cfg {
+	u32 pad;
+	u32 mux_conf;
+};
+
+static struct tamper_pin_cfg tamper_pin_list_default_config[] = {
+	{SC_P_CSI_D00, 0}, /* Tamp_Out0 */
+	{SC_P_CSI_D01, 0}, /* Tamp_Out1 */
+	{SC_P_CSI_D02, 0}, /* Tamp_Out2 */
+	{SC_P_CSI_D03, 0}, /* Tamp_Out3 */
+	{SC_P_CSI_D04, 0}, /* Tamp_Out4 */
+	{SC_P_CSI_D05, 0}, /* Tamp_In0 */
+	{SC_P_CSI_D06, 0}, /* Tamp_In1 */
+	{SC_P_CSI_D07, 0}, /* Tamp_In2 */
+	{SC_P_CSI_HSYNC, 0}, /* Tamp_In3 */
+	{SC_P_CSI_VSYNC, 0}, /* Tamp_In4 */
+};
+
+static struct tamper_pin_cfg tamper_pin_list_passive_vcc_config[] = {
+	{SC_P_CSI_D05, 0x1c000060}, /* Tamp_In0 */ /* Sel tamper + OD input */
+};
+
+static struct tamper_pin_cfg tamper_pin_list_passive_gnd_config[] = {
+	{SC_P_CSI_D05, 0x1c000060}, /* Tamp_In0 */ /* Sel tamper + OD input */
+};
+
+static struct tamper_pin_cfg tamper_pin_list_active_config[] = {
+	{SC_P_CSI_D00, 0x1a000060}, /* Tamp_Out0 */ /* Sel tamper + OD */
+	{SC_P_CSI_D05, 0x1c000060}, /* Tamp_In0 */ /* Sel tamper + OD input */
+};
+
+#define TAMPER_PIN_LIST_CHOSEN tamper_pin_list_default_config
+
+static struct tamper_pin_cfg *get_tamper_pin_cfg_list(u32 *size)
+{
+	*size = sizeof(TAMPER_PIN_LIST_CHOSEN) /
+		sizeof(TAMPER_PIN_LIST_CHOSEN[0]);
+
+	return TAMPER_PIN_LIST_CHOSEN;
+}
+
+#define SC_CONF_OFFSET_OF(_field) \
+	(offsetof(struct snvs_security_sc_conf, _field))
+
+static u32 ptr_value(u32 *_p)
+{
+	return (_p) ? *_p : 0xdeadbeef;
+}
+
+static int check_write_secvio_config(u32 id, u32 *_p1, u32 *_p2,
+				     u32 *_p3, u32 *_p4, u32 *_p5,
+				     u32 _cnt)
+{
+	int scierr = 0;
+	u32 d1 = ptr_value(_p1);
+	u32 d2 = ptr_value(_p2);
+	u32 d3 = ptr_value(_p3);
+	u32 d4 = ptr_value(_p4);
+	u32 d5 = ptr_value(_p5);
+
+	scierr = sc_seco_secvio_config(-1, id, SC_WRITE_CONF, &d1, &d2, &d3,
+				       &d4, &d4, _cnt);
+	if (scierr != SC_ERR_NONE) {
+		printf("Failed to set secvio configuration\n");
+		debug("Failed to set conf id 0x%x with values ", id);
+		debug("0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x (cnt: %d)\n",
+		      d1, d2, d3, d4, d5, _cnt);
+		goto exit;
+	}
+
+	if (_p1)
+		*(u32 *)_p1 = d1;
+	if (_p2)
+		*(u32 *)_p2 = d2;
+	if (_p3)
+		*(u32 *)_p3 = d3;
+	if (_p4)
+		*(u32 *)_p4 = d4;
+	if (_p5)
+		*(u32 *)_p5 = d5;
+
+exit:
+	return scierr;
+}
+
+#define SC_CHECK_WRITE1(id, _p1) \
+	check_write_secvio_config(id, _p1, NULL, NULL, NULL, NULL, 1)
+
+static int apply_snvs_config(struct snvs_security_sc_conf *cnf)
+{
+	int scierr = 0;
+
+	debug("%s\n", __func__);
+
+	debug("Applying config:\n"
+		  "\thp.lock = 0x%.8x\n"
+		  "\thp.secvio_ctl = 0x%.8x\n"
+		  "\tlp.lock = 0x%.8x\n"
+		  "\tlp.secvio_ctl = 0x%.8x\n"
+		  "\tlp.tamper_filt_cfg = 0x%.8x\n"
+		  "\tlp.tamper_det_cfg = 0x%.8x\n"
+		  "\tlp.tamper_det_cfg2 = 0x%.8x\n"
+		  "\tlp.tamper_filt1_cfg = 0x%.8x\n"
+		  "\tlp.tamper_filt2_cfg = 0x%.8x\n"
+		  "\tlp.act_tamper1_cfg = 0x%.8x\n"
+		  "\tlp.act_tamper2_cfg = 0x%.8x\n"
+		  "\tlp.act_tamper3_cfg = 0x%.8x\n"
+		  "\tlp.act_tamper4_cfg = 0x%.8x\n"
+		  "\tlp.act_tamper5_cfg = 0x%.8x\n"
+		  "\tlp.act_tamper_ctl = 0x%.8x\n"
+		  "\tlp.act_tamper_clk_ctl = 0x%.8x\n"
+		  "\tlp.act_tamper_routing_ctl1 = 0x%.8x\n"
+		  "\tlp.act_tamper_routing_ctl2 = 0x%.8x\n",
+			cnf->hp.lock,
+			cnf->hp.secvio_ctl,
+			cnf->lp.lock,
+			cnf->lp.secvio_ctl,
+			cnf->lp.tamper_filt_cfg,
+			cnf->lp.tamper_det_cfg,
+			cnf->lp.tamper_det_cfg2,
+			cnf->lp.tamper_filt1_cfg,
+			cnf->lp.tamper_filt2_cfg,
+			cnf->lp.act_tamper1_cfg,
+			cnf->lp.act_tamper2_cfg,
+			cnf->lp.act_tamper3_cfg,
+			cnf->lp.act_tamper4_cfg,
+			cnf->lp.act_tamper5_cfg,
+			cnf->lp.act_tamper_ctl,
+			cnf->lp.act_tamper_clk_ctl,
+			cnf->lp.act_tamper_routing_ctl1,
+			cnf->lp.act_tamper_routing_ctl2);
+
+	scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.tamper_filt_cfg),
+					   &cnf->lp.tamper_filt_cfg,
+					   &cnf->lp.tamper_filt1_cfg,
+					   &cnf->lp.tamper_filt2_cfg, NULL,
+					   NULL, 3);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Configure AT */
+	scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.act_tamper1_cfg),
+					   &cnf->lp.act_tamper1_cfg,
+					   &cnf->lp.act_tamper2_cfg,
+					   &cnf->lp.act_tamper2_cfg,
+					   &cnf->lp.act_tamper2_cfg,
+					   &cnf->lp.act_tamper2_cfg, 5);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Configure AT routing */
+	scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.act_tamper_routing_ctl1),
+					   &cnf->lp.act_tamper_routing_ctl1,
+					   &cnf->lp.act_tamper_routing_ctl2,
+					   NULL, NULL, NULL, 2);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Configure AT frequency */
+	scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(lp.act_tamper_clk_ctl),
+				 &cnf->lp.act_tamper_clk_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Activate the ATs */
+	scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(lp.act_tamper_ctl),
+				 &cnf->lp.act_tamper_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Activate the detectors */
+	scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.tamper_det_cfg),
+					   &cnf->lp.tamper_det_cfg,
+					   &cnf->lp.tamper_det_cfg2, NULL, NULL,
+					   NULL, 2);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Configure LP secvio */
+	scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(lp.secvio_ctl),
+				 &cnf->lp.secvio_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Configure HP secvio */
+	scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(hp.secvio_ctl),
+				 &cnf->hp.secvio_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Lock access */
+	scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(hp.lock), &cnf->hp.lock);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(lp.lock), &cnf->lp.lock);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+exit:
+	return (scierr == SC_ERR_NONE) ? 0 : -EIO;
+}
+
+static int dgo_write(u32 _id, u8 _access, u32 *_pdata)
+{
+	int scierr = sc_seco_secvio_dgo_config(-1, _id, _access, _pdata);
+
+	if (scierr != SC_ERR_NONE) {
+		printf("Failed to set dgo configuration\n");
+		debug("Failed to set conf id 0x%x : 0x%.8x", _id, *_pdata);
+	}
+
+	return scierr;
+}
+
+static int apply_snvs_dgo_config(struct snvs_dgo_conf *cnf)
+{
+	int scierr = 0;
+
+	debug("%s\n", __func__);
+
+	debug("Applying config:\n"
+		"\ttamper_offset_ctl = 0x%.8x\n"
+		"\ttamper_pull_ctl = 0x%.8x\n"
+		"\ttamper_ana_test_ctl = 0x%.8x\n"
+		"\ttamper_sensor_trim_ctl = 0x%.8x\n"
+		"\ttamper_misc_ctl = 0x%.8x\n"
+		"\ttamper_core_volt_mon_ctl = 0x%.8x\n",
+			cnf->tamper_offset_ctl,
+			cnf->tamper_pull_ctl,
+			cnf->tamper_ana_test_ctl,
+			cnf->tamper_sensor_trim_ctl,
+			cnf->tamper_misc_ctl,
+			cnf->tamper_core_volt_mon_ctl);
+
+	dgo_write(0x04, 1, &cnf->tamper_offset_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	dgo_write(0x14, 1, &cnf->tamper_pull_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	dgo_write(0x24, 1, &cnf->tamper_ana_test_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	dgo_write(0x34, 1, &cnf->tamper_sensor_trim_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	dgo_write(0x54, 1, &cnf->tamper_core_volt_mon_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	/* Last as it could lock the writes */
+	dgo_write(0x44, 1, &cnf->tamper_misc_ctl);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+exit:
+	return (scierr == SC_ERR_NONE) ? 0 : -EIO;
+}
+
+static int pad_write(u32 _pad, u32 _value)
+{
+	int scierr = sc_pad_set(-1, _pad, _value);
+
+	if (scierr != SC_ERR_NONE) {
+		printf("Failed to set pad configuration\n");
+		debug("Failed to set conf pad 0x%x : 0x%.8x", _pad, _value);
+	}
+
+	return scierr;
+}
+
+static int apply_tamper_pin_list_config(struct tamper_pin_cfg *confs, u32 size)
+{
+	int scierr = 0;
+	u32 idx;
+
+	debug("%s\n", __func__);
+
+	for (idx = 0; idx < size; idx++) {
+		debug("\t idx %d: pad %d: 0x%.8x\n", idx, confs[idx].pad,
+		      confs[idx].mux_conf);
+		pad_write(confs[idx].pad, 3 << 30 | confs[idx].mux_conf);
+		if (scierr != SC_ERR_NONE)
+			goto exit;
+	}
+
+exit:
+	return (scierr == SC_ERR_NONE) ? 0 : -EIO;
+}
+
+int examples(void)
+{
+	u32 size;
+	struct snvs_security_sc_conf *snvs_conf;
+	struct snvs_dgo_conf *snvs_dgo_conf;
+	struct tamper_pin_cfg *tamper_pin_conf;
+
+	/* Caller */
+	snvs_conf = get_snvs_config();
+	snvs_dgo_conf = get_snvs_dgo_config();
+	tamper_pin_conf = get_tamper_pin_cfg_list(&size);
+
+	/* Default */
+	snvs_conf = &snvs_default_config;
+	snvs_dgo_conf = &snvs_dgo_default_config;
+	tamper_pin_conf = tamper_pin_list_default_config;
+
+	/* Passive tamper expecting VCC on the line */
+	snvs_conf = &snvs_passive_vcc_config;
+	snvs_dgo_conf = &snvs_dgo_passive_vcc_config;
+	tamper_pin_conf = tamper_pin_list_passive_vcc_config;
+
+	/* Passive tamper expecting GND on the line */
+	snvs_conf = &snvs_passive_gnd_config;
+	snvs_dgo_conf = &snvs_dgo_passive_gnd_config;
+	tamper_pin_conf = tamper_pin_list_passive_gnd_config;
+
+	/* Active tamper */
+	snvs_conf = &snvs_active_config;
+	snvs_dgo_conf = &snvs_dgo_active_config;
+	tamper_pin_conf = tamper_pin_list_active_config;
+
+	return !snvs_conf + !snvs_dgo_conf + !tamper_pin_conf;
+}
+
+#ifdef CONFIG_IMX_SNVS_SEC_SC_AUTO
+int snvs_security_sc_init(void)
+{
+	int err = 0;
+
+	struct snvs_security_sc_conf *snvs_conf;
+	struct snvs_dgo_conf *snvs_dgo_conf;
+	struct tamper_pin_cfg *tamper_pin_conf;
+	u32 size;
+
+	debug("%s\n", __func__);
+
+	snvs_conf = get_snvs_config();
+	snvs_dgo_conf = get_snvs_dgo_config();
+
+	tamper_pin_conf = get_tamper_pin_cfg_list(&size);
+
+	err = apply_tamper_pin_list_config(tamper_pin_conf, size);
+	if (err) {
+		debug("Failed to set pins\n");
+		goto exit;
+	}
+
+	err = apply_snvs_dgo_config(snvs_dgo_conf);
+	if (err) {
+		debug("Failed to set dgo\n");
+		goto exit;
+	}
+
+	err = apply_snvs_config(snvs_conf);
+	if (err) {
+		debug("Failed to set snvs\n");
+		goto exit;
+	}
+
+exit:
+	return err;
+}
+#endif /* CONFIG_IMX_SNVS_SEC_SC_AUTO */
+
+static char snvs_cfg_help_text[] =
+	"snvs_cfg\n"
+	"\thp.lock\n"
+	"\thp.secvio_ctl\n"
+	"\tlp.lock\n"
+	"\tlp.secvio_ctl\n"
+	"\tlp.tamper_filt_cfg\n"
+	"\tlp.tamper_det_cfg\n"
+	"\tlp.tamper_det_cfg2\n"
+	"\tlp.tamper_filt1_cfg\n"
+	"\tlp.tamper_filt2_cfg\n"
+	"\tlp.act_tamper1_cfg\n"
+	"\tlp.act_tamper2_cfg\n"
+	"\tlp.act_tamper3_cfg\n"
+	"\tlp.act_tamper4_cfg\n"
+	"\tlp.act_tamper5_cfg\n"
+	"\tlp.act_tamper_ctl\n"
+	"\tlp.act_tamper_clk_ctl\n"
+	"\tlp.act_tamper_routing_ctl1\n"
+	"\tlp.act_tamper_routing_ctl2\n"
+	"\n"
+	"ALL values should be in hexadecimal format";
+
+#define NB_REGISTERS 18
+static int do_snvs_cfg(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	int err = 0;
+	u32 idx = 0;
+
+	struct snvs_security_sc_conf conf = {0};
+
+	if (argc != (NB_REGISTERS + 1))
+		return CMD_RET_USAGE;
+
+	conf.hp.lock = simple_strtoul(argv[++idx], NULL, 16);
+	conf.hp.secvio_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.lock = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.secvio_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.tamper_filt_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.tamper_det_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.tamper_det_cfg2 = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.tamper_filt1_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.tamper_filt2_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper1_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper2_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper3_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper4_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper5_cfg = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper_clk_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper_routing_ctl1 = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.act_tamper_routing_ctl2 = simple_strtoul(argv[++idx], NULL, 16);
+
+	err = apply_snvs_config(&conf);
+
+	return err;
+}
+
+U_BOOT_CMD(snvs_cfg,
+	   NB_REGISTERS + 1, 1, do_snvs_cfg,
+	   "Security violation configuration",
+	   snvs_cfg_help_text
+);
+
+static char snvs_dgo_cfg_help_text[] =
+	"snvs_dgo_cfg\n"
+	"\ttamper_offset_ctl\n"
+	"\ttamper_pull_ctl\n"
+	"\ttamper_ana_test_ctl\n"
+	"\ttamper_sensor_trim_ctl\n"
+	"\ttamper_misc_ctl\n"
+	"\ttamper_core_volt_mon_ctl\n"
+	"\n"
+	"ALL values should be in hexadecimal format";
+
+static int do_snvs_dgo_cfg(struct cmd_tbl *cmdtp, int flag, int argc,
+			   char *const argv[])
+{
+	int err = 0;
+	u32 idx = 0;
+
+	struct snvs_dgo_conf conf = {0};
+
+	if (argc != (6 + 1))
+		return CMD_RET_USAGE;
+
+	conf.tamper_offset_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.tamper_pull_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.tamper_ana_test_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.tamper_sensor_trim_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.tamper_misc_ctl = simple_strtoul(argv[++idx], NULL, 16);
+	conf.tamper_core_volt_mon_ctl = simple_strtoul(argv[++idx], NULL, 16);
+
+	err = apply_snvs_dgo_config(&conf);
+
+	return err;
+}
+
+U_BOOT_CMD(snvs_dgo_cfg,
+	   7, 1, do_snvs_dgo_cfg,
+	   "SNVS DGO configuration",
+	   snvs_dgo_cfg_help_text
+);
+
+static char tamper_pin_cfg_help_text[] =
+	"snvs_dgo_cfg\n"
+	"\tpad\n"
+	"\tvalue\n"
+	"\n"
+	"ALL values should be in hexadecimal format";
+
+static int do_tamper_pin_cfg(struct cmd_tbl *cmdtp, int flag, int argc,
+			     char *const argv[])
+{
+	int err = 0;
+	u32 idx = 0;
+
+	struct tamper_pin_cfg conf = {0};
+
+	if (argc != (2 + 1))
+		return CMD_RET_USAGE;
+
+	conf.pad = simple_strtoul(argv[++idx], NULL, 10);
+	conf.mux_conf = simple_strtoul(argv[++idx], NULL, 16);
+
+	err = apply_tamper_pin_list_config(&conf, 1);
+
+	return err;
+}
+
+U_BOOT_CMD(tamper_pin_cfg,
+	   3, 1, do_tamper_pin_cfg,
+	   "tamper pin configuration",
+	   tamper_pin_cfg_help_text
+);
+
+static char snvs_clear_status_help_text[] =
+	"snvs_clear_status\n"
+	"\tHPSR\n"
+	"\tHPSVSR\n"
+	"\tLPSR\n"
+	"\tLPTDSR\n"
+	"\n"
+	"Write the status registers with the value provided,"
+	" clearing the status";
+
+static int do_snvs_clear_status(struct cmd_tbl *cmdtp, int flag, int argc,
+				char *const argv[])
+{
+	int scierr = 0;
+	u32 idx = 0;
+
+	struct snvs_security_sc_conf conf = {0};
+
+	if (argc != (2 + 1))
+		return CMD_RET_USAGE;
+
+	conf.lp.status = simple_strtoul(argv[++idx], NULL, 16);
+	conf.lp.tamper_det_status = simple_strtoul(argv[++idx], NULL, 16);
+
+	scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.status),
+					   &conf.lp.status, NULL, NULL, NULL,
+					   NULL, 1);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+	scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.tamper_det_status),
+					   &conf.lp.tamper_det_status, NULL,
+					   NULL, NULL, NULL, 1);
+	if (scierr != SC_ERR_NONE)
+		goto exit;
+
+exit:
+	return (scierr == SC_ERR_NONE) ? 0 : 1;
+}
+
+U_BOOT_CMD(snvs_clear_status,
+	   3, 1, do_snvs_clear_status,
+	   "snvs clear status",
+	   snvs_clear_status_help_text
+);
+
+static char snvs_sec_status_help_text[] =
+	"snvs_sec_status\n"
+	"Display information about the security related to tamper and secvio";
+
+static int do_snvs_sec_status(struct cmd_tbl *cmdtp, int flag, int argc,
+			      char *const argv[])
+{
+	int scierr;
+	u32 idx;
+
+	u32 data[5];
+
+	u32 pads[] = {
+		SC_P_CSI_D00,
+		SC_P_CSI_D01,
+		SC_P_CSI_D02,
+		SC_P_CSI_D03,
+		SC_P_CSI_D04,
+		SC_P_CSI_D05,
+		SC_P_CSI_D06,
+		SC_P_CSI_D07,
+		SC_P_CSI_HSYNC,
+		SC_P_CSI_VSYNC,
+	};
+
+	u32 fuses[] = {
+		14,
+		30,
+		31,
+		260,
+		261,
+		262,
+		263,
+		768,
+	};
+
+	struct snvs_reg {
+		u32 id;
+		u32 nb;
+	} snvs[] = {
+		/* Locks */
+		{0x0,  1},
+		{0x34, 1},
+		/* Security violation */
+		{0xc,  1},
+		{0x10, 1},
+		{0x18, 1},
+		{0x40, 1},
+		/* Temper detectors */
+		{0x48, 2},
+		{0x4c, 1},
+		{0xa4, 1},
+		/* */
+		{0x44, 3},
+		{0xe0, 1},
+		{0xe4, 1},
+		{0xe8, 2},
+		/* Misc */
+		{0x3c, 1},
+		{0x5c, 2},
+		{0x64, 1},
+		{0xf8, 2},
+	};
+
+	u32 dgo[] = {
+		0x0,
+		0x10,
+		0x20,
+		0x30,
+		0x40,
+		0x50,
+	};
+
+	/* Pins */
+	printf("Pins:\n");
+	for (idx = 0; idx < ARRAY_SIZE(pads); idx++) {
+		u8 pad_id = pads[idx];
+
+		scierr = sc_pad_get(-1, pad_id, &data[0]);
+		if (scierr == 0)
+			printf("\t- Pin %d: %.8x\n", pad_id, data[0]);
+		else
+			printf("Failed to read Pin %d\n", pad_id);
+	}
+
+	/* Fuses */
+	printf("Fuses:\n");
+	for (idx = 0; idx < ARRAY_SIZE(fuses); idx++) {
+		u32 fuse_id = fuses[idx];
+
+		scierr = sc_misc_otp_fuse_read(-1, fuse_id, &data[0]);
+		if (scierr == 0)
+			printf("\t- Fuse %d: %.8x\n", fuse_id, data[0]);
+		else
+			printf("Failed to read Fuse %d\n", fuse_id);
+	}
+
+	/* SNVS */
+	printf("SNVS:\n");
+	for (idx = 0; idx < ARRAY_SIZE(snvs); idx++) {
+		struct snvs_reg *reg = &snvs[idx];
+
+		scierr = sc_seco_secvio_config(-1, reg->id, 0, &data[0],
+					       &data[1], &data[2], &data[3],
+					       &data[4], reg->nb);
+		if (scierr == 0) {
+			int subidx;
+
+			printf("\t- SNVS %.2x(%d):", reg->id, reg->nb);
+			for (subidx = 0; subidx < reg->nb; subidx++)
+				printf(" %.8x", data[subidx]);
+			printf("\n");
+		} else {
+			printf("Failed to read SNVS %d\n", reg->id);
+		}
+	}
+
+	/* DGO */
+	printf("DGO:\n");
+	for (idx = 0; idx < ARRAY_SIZE(dgo); idx++) {
+		u8 dgo_id = dgo[idx];
+
+		scierr = sc_seco_secvio_dgo_config(-1, dgo_id, 0, &data[0]);
+		if (scierr == 0)
+			printf("\t- DGO %.2x: %.8x\n", dgo_id, data[0]);
+		else
+			printf("Failed to read DGO %d\n", dgo_id);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(snvs_sec_status,
+	   1, 1, do_snvs_sec_status,
+	   "tamper pin configuration",
+	   snvs_sec_status_help_text
+);
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/Kconfig b/roms/u-boot/arch/arm/mach-imx/imx8m/Kconfig
new file mode 100644
index 000000000..0669363c0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/Kconfig
@@ -0,0 +1,158 @@
+if ARCH_IMX8M
+
+config IMX8M
+	bool
+	select HAS_CAAM
+	select ROM_UNIFIED_SECTIONS
+
+config IMX8MQ
+	bool
+	select IMX8M
+
+config IMX8MM
+	bool
+	select IMX8M
+
+config IMX8MN
+	bool
+	select IMX8M
+
+config IMX8MP
+	bool
+	select IMX8M
+
+config SYS_SOC
+	default "imx8m"
+
+choice
+	prompt  "NXP i.MX8M board select"
+	optional
+
+config TARGET_IMX8MQ_CM
+        bool "Ronetix iMX8MQ-CM SoM"
+		select BINMAN
+        select IMX8MQ
+        select IMX8M_LPDDR4
+
+config TARGET_IMX8MQ_EVK
+	bool "imx8mq_evk"
+	select IMX8MQ
+	select IMX8M_LPDDR4
+
+config TARGET_IMX8MQ_PHANBELL
+        bool "imx8mq_phanbell"
+        select IMX8MQ
+        select IMX8M_LPDDR4
+
+config TARGET_IMX8MM_EVK
+	bool "imx8mm LPDDR4 EVK board"
+	select BINMAN
+	select IMX8MM
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
+config TARGET_IMX8MM_ICORE_MX8MM
+	bool "Engicam i.Core MX8M Mini SOM"
+	select IMX8MM
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+	help
+	  i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM.
+
+	  i.Core MX8M Mini EDIMM2.2:
+	  * EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
+	  * i.Core MX8M Mini needs to mount on top of EDIMM2.2 for
+	    creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
+
+	  i.Core MX8M Mini C.TOUCH 2.0
+	  * C.TOUCH 2.0 is a general purpose Carrier board.
+	  * i.Core MX8M Mini needs to mount on top of this Carrier board
+	    for creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
+
+config TARGET_IMX8MM_VENICE
+	bool "Support Gateworks Venice iMX8M Mini module"
+	select IMX8MM
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
+config TARGET_IMX8MN_EVK
+	bool "imx8mn LPDDR4 EVK board"
+	select BINMAN
+	select IMX8MN
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
+config TARGET_IMX8MN_DDR4_EVK
+	bool "imx8mn DDR4 EVK board"
+	select BINMAN
+	select IMX8MN
+	select SUPPORT_SPL
+	select IMX8M_DDR4
+
+config TARGET_IMX8MP_EVK
+	bool "imx8mp LPDDR4 EVK board"
+	select BINMAN
+	select IMX8MP
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
+config TARGET_PICO_IMX8MQ
+	bool "Support Technexion Pico iMX8MQ"
+	select IMX8MQ
+	select IMX8M_LPDDR4
+
+config TARGET_VERDIN_IMX8MM
+       bool "Support Toradex Verdin iMX8M Mini module"
+       select IMX8MM
+       select SUPPORT_SPL
+       select IMX8M_LPDDR4
+
+config TARGET_IMX8MM_BEACON
+	bool "imx8mm Beacon Embedded devkit"
+	select IMX8MM
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
+config TARGET_IMX8MN_BEACON
+	bool "imx8mn Beacon Embedded devkit"
+	select IMX8MN
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
+config TARGET_PHYCORE_IMX8MM
+	bool "PHYTEC PHYCORE i.MX8MM"
+	select IMX8MM
+        select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
+config TARGET_PHYCORE_IMX8MP
+	bool "PHYTEC PHYCORE i.MX8MP"
+	select IMX8MP
+        select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
+config TARGET_IMX8MM_CL_IOT_GATE
+	bool "CompuLab iot-gate-imx8"
+	select BINMAN
+	select IMX8MM
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+endchoice
+
+source "board/beacon/imx8mm/Kconfig"
+source "board/beacon/imx8mn/Kconfig"
+source "board/compulab/imx8mm-cl-iot-gate/Kconfig"
+source "board/engicam/imx8mm/Kconfig"
+source "board/freescale/imx8mq_evk/Kconfig"
+source "board/freescale/imx8mm_evk/Kconfig"
+source "board/freescale/imx8mn_evk/Kconfig"
+source "board/freescale/imx8mp_evk/Kconfig"
+source "board/gateworks/venice/Kconfig"
+source "board/google/imx8mq_phanbell/Kconfig"
+source "board/phytec/phycore_imx8mm/Kconfig"
+source "board/phytec/phycore_imx8mp/Kconfig"
+source "board/ronetix/imx8mq-cm/Kconfig"
+source "board/technexion/pico-imx8mq/Kconfig"
+source "board/toradex/verdin-imx8mm/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/Makefile b/roms/u-boot/arch/arm/mach-imx/imx8m/Makefile
new file mode 100644
index 000000000..d9dee894a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2017 NXP
+
+obj-y += lowlevel_init.o
+obj-y += clock_slice.o soc.o
+obj-$(CONFIG_IMX8MQ) += clock_imx8mq.o
+obj-$(CONFIG_IMX8MM)$(CONFIG_IMX8MN)$(CONFIG_IMX8MP) += clock_imx8mm.o
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/roms/u-boot/arch/arm/mach-imx/imx8m/clock_imx8mm.c
new file mode 100644
index 000000000..f8e4ec0d9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/clock_imx8mm.c
@@ -0,0 +1,938 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <errno.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
+
+static u32 get_root_clk(enum clk_root_index clock_id);
+
+#ifdef CONFIG_IMX_HAB
+void hab_caam_clock_enable(unsigned char enable)
+{
+	/* The CAAM clock is always on for iMX8M */
+}
+#endif
+
+void enable_ocotp_clk(unsigned char enable)
+{
+	clock_enable(CCGR_OCOTP, !!enable);
+}
+
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
+{
+	/* 0 - 3 is valid i2c num */
+	if (i2c_num > 3)
+		return -EINVAL;
+
+	clock_enable(CCGR_I2C1 + i2c_num, !!enable);
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = {
+	PLL_1443X_RATE(1000000000U, 250, 3, 1, 0),
+	PLL_1443X_RATE(800000000U, 300, 9, 0, 0),
+	PLL_1443X_RATE(750000000U, 250, 8, 0, 0),
+	PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
+	PLL_1443X_RATE(600000000U, 300, 3, 2, 0),
+	PLL_1443X_RATE(594000000U, 99, 1, 2, 0),
+	PLL_1443X_RATE(400000000U, 300, 9, 1, 0),
+	PLL_1443X_RATE(266000000U, 400, 9, 2, 0),
+	PLL_1443X_RATE(167000000U, 334, 3, 4, 0),
+	PLL_1443X_RATE(100000000U, 300, 9, 3, 0),
+};
+
+static int fracpll_configure(enum pll_clocks pll, u32 freq)
+{
+	int i;
+	u32 tmp, div_val;
+	void *pll_base;
+	struct imx_int_pll_rate_table *rate;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mm_fracpll_tbl); i++) {
+		if (freq == imx8mm_fracpll_tbl[i].rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(imx8mm_fracpll_tbl)) {
+		printf("%s: No matched freq table %u\n", __func__, freq);
+		return -EINVAL;
+	}
+
+	rate = &imx8mm_fracpll_tbl[i];
+
+	switch (pll) {
+	case ANATOP_DRAM_PLL:
+		setbits_le32(GPC_BASE_ADDR + 0xEC, 1 << 7);
+		setbits_le32(GPC_BASE_ADDR + 0xF8, 1 << 5);
+		writel(SRC_DDR1_ENABLE_MASK, SRC_BASE_ADDR + 0x1004);
+
+		pll_base = &ana_pll->dram_pll_gnrl_ctl;
+		break;
+	case ANATOP_VIDEO_PLL:
+		pll_base = &ana_pll->video_pll1_gnrl_ctl;
+		break;
+	default:
+		return 0;
+	}
+	/* Bypass clock and set lock to pll output lock */
+	tmp = readl(pll_base);
+	tmp |= BYPASS_MASK;
+	writel(tmp, pll_base);
+
+	/* Enable RST */
+	tmp &= ~RST_MASK;
+	writel(tmp, pll_base);
+
+	div_val = (rate->mdiv << MDIV_SHIFT) | (rate->pdiv << PDIV_SHIFT) |
+		(rate->sdiv << SDIV_SHIFT);
+	writel(div_val, pll_base + 4);
+	writel(rate->kdiv << KDIV_SHIFT, pll_base + 8);
+
+	__udelay(100);
+
+	/* Disable RST */
+	tmp |= RST_MASK;
+	writel(tmp, pll_base);
+
+	/* Wait Lock*/
+	while (!(readl(pll_base) & LOCK_STATUS))
+		;
+
+	/* Bypass */
+	tmp &= ~BYPASS_MASK;
+	writel(tmp, pll_base);
+
+	return 0;
+}
+
+void dram_pll_init(ulong pll_val)
+{
+	fracpll_configure(ANATOP_DRAM_PLL, pll_val);
+}
+
+static struct dram_bypass_clk_setting imx8mm_dram_bypass_tbl[] = {
+	DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2,
+				CLK_ROOT_PRE_DIV2),
+	DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2,
+				CLK_ROOT_PRE_DIV2),
+	DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3,
+				CLK_ROOT_PRE_DIV2),
+};
+
+void dram_enable_bypass(ulong clk_val)
+{
+	int i;
+	struct dram_bypass_clk_setting *config;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mm_dram_bypass_tbl); i++) {
+		if (clk_val == imx8mm_dram_bypass_tbl[i].clk)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(imx8mm_dram_bypass_tbl)) {
+		printf("%s: No matched freq table %lu\n", __func__, clk_val);
+		return;
+	}
+
+	config = &imx8mm_dram_bypass_tbl[i];
+
+	clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(config->alt_root_sel) |
+			     CLK_ROOT_PRE_DIV(config->alt_pre_div));
+	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(config->apb_root_sel) |
+			     CLK_ROOT_PRE_DIV(config->apb_pre_div));
+	clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(1));
+}
+
+void dram_disable_bypass(void)
+{
+	clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(0));
+	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(4) |
+			     CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5));
+}
+#endif
+
+int intpll_configure(enum pll_clocks pll, ulong freq)
+{
+	void __iomem *pll_gnrl_ctl, __iomem *pll_div_ctl;
+	u32 pll_div_ctl_val, pll_clke_masks;
+
+	switch (pll) {
+	case ANATOP_SYSTEM_PLL1:
+		pll_gnrl_ctl = &ana_pll->sys_pll1_gnrl_ctl;
+		pll_div_ctl = &ana_pll->sys_pll1_div_ctl;
+		pll_clke_masks = INTPLL_DIV20_CLKE_MASK |
+			INTPLL_DIV10_CLKE_MASK | INTPLL_DIV8_CLKE_MASK |
+			INTPLL_DIV6_CLKE_MASK | INTPLL_DIV5_CLKE_MASK |
+			INTPLL_DIV4_CLKE_MASK | INTPLL_DIV3_CLKE_MASK |
+			INTPLL_DIV2_CLKE_MASK | INTPLL_CLKE_MASK;
+		break;
+	case ANATOP_SYSTEM_PLL2:
+		pll_gnrl_ctl = &ana_pll->sys_pll2_gnrl_ctl;
+		pll_div_ctl = &ana_pll->sys_pll2_div_ctl;
+		pll_clke_masks = INTPLL_DIV20_CLKE_MASK |
+			INTPLL_DIV10_CLKE_MASK | INTPLL_DIV8_CLKE_MASK |
+			INTPLL_DIV6_CLKE_MASK | INTPLL_DIV5_CLKE_MASK |
+			INTPLL_DIV4_CLKE_MASK | INTPLL_DIV3_CLKE_MASK |
+			INTPLL_DIV2_CLKE_MASK | INTPLL_CLKE_MASK;
+		break;
+	case ANATOP_SYSTEM_PLL3:
+		pll_gnrl_ctl = &ana_pll->sys_pll3_gnrl_ctl;
+		pll_div_ctl = &ana_pll->sys_pll3_div_ctl;
+		pll_clke_masks = INTPLL_CLKE_MASK;
+		break;
+	case ANATOP_ARM_PLL:
+		pll_gnrl_ctl = &ana_pll->arm_pll_gnrl_ctl;
+		pll_div_ctl = &ana_pll->arm_pll_div_ctl;
+		pll_clke_masks = INTPLL_CLKE_MASK;
+		break;
+	case ANATOP_GPU_PLL:
+		pll_gnrl_ctl = &ana_pll->gpu_pll_gnrl_ctl;
+		pll_div_ctl = &ana_pll->gpu_pll_div_ctl;
+		pll_clke_masks = INTPLL_CLKE_MASK;
+		break;
+	case ANATOP_VPU_PLL:
+		pll_gnrl_ctl = &ana_pll->vpu_pll_gnrl_ctl;
+		pll_div_ctl = &ana_pll->vpu_pll_div_ctl;
+		pll_clke_masks = INTPLL_CLKE_MASK;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	switch (freq) {
+	case MHZ(600):
+		/* 24 * 0x12c / 3 / 2 ^ 2 */
+		pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0x12c) |
+			INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(2);
+		break;
+	case MHZ(750):
+		/* 24 * 0xfa / 2 / 2 ^ 2 */
+		pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
+			INTPLL_PRE_DIV_VAL(2) | INTPLL_POST_DIV_VAL(2);
+		break;
+	case MHZ(800):
+		/* 24 * 0x190 / 3 / 2 ^ 2 */
+		pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0x190) |
+			INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(2);
+		break;
+	case MHZ(1000):
+		/* 24 * 0xfa / 3 / 2 ^ 1 */
+		pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
+			INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(1);
+		break;
+	case MHZ(1200):
+		/* 24 * 0xc8 / 2 / 2 ^ 1 */
+		pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xc8) |
+			INTPLL_PRE_DIV_VAL(2) | INTPLL_POST_DIV_VAL(1);
+		break;
+	case MHZ(2000):
+		/* 24 * 0xfa / 3 / 2 ^ 0 */
+		pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
+			INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(0);
+		break;
+	default:
+		return -EINVAL;
+	};
+	/* Bypass clock and set lock to pll output lock */
+	setbits_le32(pll_gnrl_ctl, INTPLL_BYPASS_MASK | INTPLL_LOCK_SEL_MASK);
+	/* Enable reset */
+	clrbits_le32(pll_gnrl_ctl, INTPLL_RST_MASK);
+	/* Configure */
+	writel(pll_div_ctl_val, pll_div_ctl);
+
+	__udelay(100);
+
+	/* Disable reset */
+	setbits_le32(pll_gnrl_ctl, INTPLL_RST_MASK);
+	/* Wait Lock */
+	while (!(readl(pll_gnrl_ctl) & INTPLL_LOCK_MASK))
+		;
+	/* Clear bypass */
+	clrbits_le32(pll_gnrl_ctl, INTPLL_BYPASS_MASK);
+	setbits_le32(pll_gnrl_ctl, pll_clke_masks);
+
+	return 0;
+}
+
+void init_uart_clk(u32 index)
+{
+	/*
+	 * set uart clock root
+	 * 24M OSC
+	 */
+	switch (index) {
+	case 0:
+		clock_enable(CCGR_UART1, 0);
+		clock_set_target_val(UART1_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_UART1, 1);
+		return;
+	case 1:
+		clock_enable(CCGR_UART2, 0);
+		clock_set_target_val(UART2_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_UART2, 1);
+		return;
+	case 2:
+		clock_enable(CCGR_UART3, 0);
+		clock_set_target_val(UART3_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_UART3, 1);
+		return;
+	case 3:
+		clock_enable(CCGR_UART4, 0);
+		clock_set_target_val(UART4_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_UART4, 1);
+		return;
+	default:
+		printf("Invalid uart index\n");
+		return;
+	}
+}
+
+void init_wdog_clk(void)
+{
+	clock_enable(CCGR_WDOG1, 0);
+	clock_enable(CCGR_WDOG2, 0);
+	clock_enable(CCGR_WDOG3, 0);
+	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(0));
+	clock_enable(CCGR_WDOG1, 1);
+	clock_enable(CCGR_WDOG2, 1);
+	clock_enable(CCGR_WDOG3, 1);
+}
+
+void init_clk_usdhc(u32 index)
+{
+	/*
+	 * set usdhc clock root
+	 * sys pll1 400M
+	 */
+	switch (index) {
+	case 0:
+		clock_enable(CCGR_USDHC1, 0);
+		clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USDHC1, 1);
+		return;
+	case 1:
+		clock_enable(CCGR_USDHC2, 0);
+		clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USDHC2, 1);
+		return;
+	case 2:
+		clock_enable(CCGR_USDHC3, 0);
+		clock_set_target_val(USDHC3_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USDHC3, 1);
+		return;
+	default:
+		printf("Invalid usdhc index\n");
+		return;
+	}
+}
+
+void init_clk_ecspi(u32 index)
+{
+	switch (index) {
+	case 0:
+		clock_enable(CCGR_ECSPI1, 0);
+		clock_set_target_val(ECSPI1_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_ECSPI1, 1);
+		return;
+	case 1:
+		clock_enable(CCGR_ECSPI2, 0);
+		clock_set_target_val(ECSPI2_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_ECSPI2, 1);
+		return;
+	case 2:
+		clock_enable(CCGR_ECSPI3, 0);
+		clock_set_target_val(ECSPI3_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_ECSPI3, 1);
+		return;
+	default:
+		printf("Invalid ecspi index\n");
+		return;
+	}
+}
+
+void init_nand_clk(void)
+{
+	/*
+	 * set rawnand root
+	 * sys pll1 400M
+	 */
+	clock_enable(CCGR_RAWNAND, 0);
+	clock_set_target_val(NAND_CLK_ROOT, CLK_ROOT_ON |
+		CLK_ROOT_SOURCE_SEL(3) | CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4)); /* 100M */
+	clock_enable(CCGR_RAWNAND, 1);
+}
+
+int clock_init(void)
+{
+	u32 val_cfg0;
+
+	/*
+	 * The gate is not exported to clk tree, so configure them here.
+	 * According to ANAMIX SPEC
+	 * sys pll1 fixed at 800MHz
+	 * sys pll2 fixed at 1GHz
+	 * Here we only enable the outputs.
+	 */
+	val_cfg0 = readl(&ana_pll->sys_pll1_gnrl_ctl);
+	val_cfg0 |= INTPLL_CLKE_MASK | INTPLL_DIV2_CLKE_MASK |
+		INTPLL_DIV3_CLKE_MASK | INTPLL_DIV4_CLKE_MASK |
+		INTPLL_DIV5_CLKE_MASK | INTPLL_DIV6_CLKE_MASK |
+		INTPLL_DIV8_CLKE_MASK | INTPLL_DIV10_CLKE_MASK |
+		INTPLL_DIV20_CLKE_MASK;
+	writel(val_cfg0, &ana_pll->sys_pll1_gnrl_ctl);
+
+	val_cfg0 = readl(&ana_pll->sys_pll2_gnrl_ctl);
+	val_cfg0 |= INTPLL_CLKE_MASK | INTPLL_DIV2_CLKE_MASK |
+		INTPLL_DIV3_CLKE_MASK | INTPLL_DIV4_CLKE_MASK |
+		INTPLL_DIV5_CLKE_MASK | INTPLL_DIV6_CLKE_MASK |
+		INTPLL_DIV8_CLKE_MASK | INTPLL_DIV10_CLKE_MASK |
+		INTPLL_DIV20_CLKE_MASK;
+	writel(val_cfg0, &ana_pll->sys_pll2_gnrl_ctl);
+
+	/* Configure ARM at 1.2GHz */
+	clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(2));
+
+	intpll_configure(ANATOP_ARM_PLL, MHZ(1200));
+
+	/* Bypass CCM A53 ROOT, Switch to ARM PLL -> MUX-> CPU */
+	clock_set_target_val(CORE_SEL_CFG, CLK_ROOT_SOURCE_SEL(1));
+
+	if (is_imx8mn() || is_imx8mp())
+		intpll_configure(ANATOP_SYSTEM_PLL3, MHZ(600));
+	else
+		intpll_configure(ANATOP_SYSTEM_PLL3, MHZ(750));
+
+#ifdef CONFIG_IMX8MP
+	/* 8MP ROM already set NOC to 800Mhz, only need to configure NOC_IO clk to 600Mhz */
+	/* 8MP ROM already set GIC to 400Mhz, system_pll1_800m with div = 2 */
+	clock_set_target_val(NOC_IO_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(2));
+#else
+	clock_set_target_val(NOC_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(2));
+
+	/* config GIC to sys_pll2_100m */
+	clock_enable(CCGR_GIC, 0);
+	clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(3));
+	clock_enable(CCGR_GIC, 1);
+#endif
+
+	clock_set_target_val(NAND_USDHC_BUS_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(1));
+
+	clock_enable(CCGR_DDR1, 0);
+	clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(1));
+	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(1));
+	clock_enable(CCGR_DDR1, 1);
+
+	init_wdog_clk();
+
+	clock_enable(CCGR_TEMP_SENSOR, 1);
+
+	clock_enable(CCGR_SEC_DEBUG, 1);
+
+	return 0;
+};
+
+u32 imx_get_uartclk(void)
+{
+	return 24000000U;
+}
+
+static u32 decode_intpll(enum clk_root_src intpll)
+{
+	u32 pll_gnrl_ctl, pll_div_ctl, pll_clke_mask;
+	u32 main_div, pre_div, post_div, div;
+	u64 freq;
+
+	switch (intpll) {
+	case ARM_PLL_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->arm_pll_gnrl_ctl);
+		pll_div_ctl = readl(&ana_pll->arm_pll_div_ctl);
+		break;
+	case GPU_PLL_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->gpu_pll_gnrl_ctl);
+		pll_div_ctl = readl(&ana_pll->gpu_pll_div_ctl);
+		break;
+	case VPU_PLL_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->vpu_pll_gnrl_ctl);
+		pll_div_ctl = readl(&ana_pll->vpu_pll_div_ctl);
+		break;
+	case SYSTEM_PLL1_800M_CLK:
+	case SYSTEM_PLL1_400M_CLK:
+	case SYSTEM_PLL1_266M_CLK:
+	case SYSTEM_PLL1_200M_CLK:
+	case SYSTEM_PLL1_160M_CLK:
+	case SYSTEM_PLL1_133M_CLK:
+	case SYSTEM_PLL1_100M_CLK:
+	case SYSTEM_PLL1_80M_CLK:
+	case SYSTEM_PLL1_40M_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->sys_pll1_gnrl_ctl);
+		pll_div_ctl = readl(&ana_pll->sys_pll1_div_ctl);
+		break;
+	case SYSTEM_PLL2_1000M_CLK:
+	case SYSTEM_PLL2_500M_CLK:
+	case SYSTEM_PLL2_333M_CLK:
+	case SYSTEM_PLL2_250M_CLK:
+	case SYSTEM_PLL2_200M_CLK:
+	case SYSTEM_PLL2_166M_CLK:
+	case SYSTEM_PLL2_125M_CLK:
+	case SYSTEM_PLL2_100M_CLK:
+	case SYSTEM_PLL2_50M_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->sys_pll2_gnrl_ctl);
+		pll_div_ctl = readl(&ana_pll->sys_pll2_div_ctl);
+		break;
+	case SYSTEM_PLL3_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->sys_pll3_gnrl_ctl);
+		pll_div_ctl = readl(&ana_pll->sys_pll3_div_ctl);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Only support SYS_XTAL 24M, PAD_CLK not take into consideration */
+	if ((pll_gnrl_ctl & INTPLL_REF_CLK_SEL_MASK) != 0)
+		return 0;
+
+	if ((pll_gnrl_ctl & INTPLL_RST_MASK) == 0)
+		return 0;
+
+	/*
+	 * When BYPASS is equal to 1, PLL enters the bypass mode
+	 * regardless of the values of RESETB
+	 */
+	if (pll_gnrl_ctl & INTPLL_BYPASS_MASK)
+		return 24000000u;
+
+	if (!(pll_gnrl_ctl & INTPLL_LOCK_MASK)) {
+		puts("pll not locked\n");
+		return 0;
+	}
+
+	switch (intpll) {
+	case ARM_PLL_CLK:
+	case GPU_PLL_CLK:
+	case VPU_PLL_CLK:
+	case SYSTEM_PLL3_CLK:
+	case SYSTEM_PLL1_800M_CLK:
+	case SYSTEM_PLL2_1000M_CLK:
+		pll_clke_mask = INTPLL_CLKE_MASK;
+		div = 1;
+		break;
+
+	case SYSTEM_PLL1_400M_CLK:
+	case SYSTEM_PLL2_500M_CLK:
+		pll_clke_mask = INTPLL_DIV2_CLKE_MASK;
+		div = 2;
+		break;
+
+	case SYSTEM_PLL1_266M_CLK:
+	case SYSTEM_PLL2_333M_CLK:
+		pll_clke_mask = INTPLL_DIV3_CLKE_MASK;
+		div = 3;
+		break;
+
+	case SYSTEM_PLL1_200M_CLK:
+	case SYSTEM_PLL2_250M_CLK:
+		pll_clke_mask = INTPLL_DIV4_CLKE_MASK;
+		div = 4;
+		break;
+
+	case SYSTEM_PLL1_160M_CLK:
+	case SYSTEM_PLL2_200M_CLK:
+		pll_clke_mask = INTPLL_DIV5_CLKE_MASK;
+		div = 5;
+		break;
+
+	case SYSTEM_PLL1_133M_CLK:
+	case SYSTEM_PLL2_166M_CLK:
+		pll_clke_mask = INTPLL_DIV6_CLKE_MASK;
+		div = 6;
+		break;
+
+	case SYSTEM_PLL1_100M_CLK:
+	case SYSTEM_PLL2_125M_CLK:
+		pll_clke_mask = INTPLL_DIV8_CLKE_MASK;
+		div = 8;
+		break;
+
+	case SYSTEM_PLL1_80M_CLK:
+	case SYSTEM_PLL2_100M_CLK:
+		pll_clke_mask = INTPLL_DIV10_CLKE_MASK;
+		div = 10;
+		break;
+
+	case SYSTEM_PLL1_40M_CLK:
+	case SYSTEM_PLL2_50M_CLK:
+		pll_clke_mask = INTPLL_DIV20_CLKE_MASK;
+		div = 20;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if ((pll_gnrl_ctl & pll_clke_mask) == 0)
+		return 0;
+
+	main_div = (pll_div_ctl & INTPLL_MAIN_DIV_MASK) >>
+		INTPLL_MAIN_DIV_SHIFT;
+	pre_div = (pll_div_ctl & INTPLL_PRE_DIV_MASK) >>
+		INTPLL_PRE_DIV_SHIFT;
+	post_div = (pll_div_ctl & INTPLL_POST_DIV_MASK) >>
+		INTPLL_POST_DIV_SHIFT;
+
+	/* FFVCO = (m * FFIN) / p, FFOUT = (m * FFIN) / (p * 2^s) */
+	freq = 24000000ULL * main_div;
+	return lldiv(freq, pre_div * (1 << post_div) * div);
+}
+
+static u32 decode_fracpll(enum clk_root_src frac_pll)
+{
+	u32 pll_gnrl_ctl, pll_fdiv_ctl0, pll_fdiv_ctl1;
+	u32 main_div, pre_div, post_div, k;
+
+	switch (frac_pll) {
+	case DRAM_PLL1_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->dram_pll_gnrl_ctl);
+		pll_fdiv_ctl0 = readl(&ana_pll->dram_pll_fdiv_ctl0);
+		pll_fdiv_ctl1 = readl(&ana_pll->dram_pll_fdiv_ctl1);
+		break;
+	case AUDIO_PLL1_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->audio_pll1_gnrl_ctl);
+		pll_fdiv_ctl0 = readl(&ana_pll->audio_pll1_fdiv_ctl0);
+		pll_fdiv_ctl1 = readl(&ana_pll->audio_pll1_fdiv_ctl1);
+		break;
+	case AUDIO_PLL2_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->audio_pll2_gnrl_ctl);
+		pll_fdiv_ctl0 = readl(&ana_pll->audio_pll2_fdiv_ctl0);
+		pll_fdiv_ctl1 = readl(&ana_pll->audio_pll2_fdiv_ctl1);
+		break;
+	case VIDEO_PLL_CLK:
+		pll_gnrl_ctl = readl(&ana_pll->video_pll1_gnrl_ctl);
+		pll_fdiv_ctl0 = readl(&ana_pll->video_pll1_fdiv_ctl0);
+		pll_fdiv_ctl1 = readl(&ana_pll->video_pll1_fdiv_ctl1);
+		break;
+	default:
+		printf("Unsupported clk_root_src %d\n", frac_pll);
+		return 0;
+	}
+
+	/* Only support SYS_XTAL 24M, PAD_CLK not take into consideration */
+	if ((pll_gnrl_ctl & GENMASK(1, 0)) != 0)
+		return 0;
+
+	if ((pll_gnrl_ctl & RST_MASK) == 0)
+		return 0;
+	/*
+	 * When BYPASS is equal to 1, PLL enters the bypass mode
+	 * regardless of the values of RESETB
+	 */
+	if (pll_gnrl_ctl & BYPASS_MASK)
+		return 24000000u;
+
+	if (!(pll_gnrl_ctl & LOCK_STATUS)) {
+		puts("pll not locked\n");
+		return 0;
+	}
+
+	if (!(pll_gnrl_ctl & CLKE_MASK))
+		return 0;
+
+	main_div = (pll_fdiv_ctl0 & MDIV_MASK) >>
+		MDIV_SHIFT;
+	pre_div = (pll_fdiv_ctl0 & PDIV_MASK) >>
+		PDIV_SHIFT;
+	post_div = (pll_fdiv_ctl0 & SDIV_MASK) >>
+		SDIV_SHIFT;
+
+	k = pll_fdiv_ctl1 & KDIV_MASK;
+
+	return lldiv((main_div * 65536 + k) * 24000000ULL,
+		     65536 * pre_div * (1 << post_div));
+}
+
+static u32 get_root_src_clk(enum clk_root_src root_src)
+{
+	switch (root_src) {
+	case OSC_24M_CLK:
+		return 24000000u;
+	case OSC_HDMI_CLK:
+		return 26000000u;
+	case OSC_32K_CLK:
+		return 32000u;
+	case ARM_PLL_CLK:
+	case GPU_PLL_CLK:
+	case VPU_PLL_CLK:
+	case SYSTEM_PLL1_800M_CLK:
+	case SYSTEM_PLL1_400M_CLK:
+	case SYSTEM_PLL1_266M_CLK:
+	case SYSTEM_PLL1_200M_CLK:
+	case SYSTEM_PLL1_160M_CLK:
+	case SYSTEM_PLL1_133M_CLK:
+	case SYSTEM_PLL1_100M_CLK:
+	case SYSTEM_PLL1_80M_CLK:
+	case SYSTEM_PLL1_40M_CLK:
+	case SYSTEM_PLL2_1000M_CLK:
+	case SYSTEM_PLL2_500M_CLK:
+	case SYSTEM_PLL2_333M_CLK:
+	case SYSTEM_PLL2_250M_CLK:
+	case SYSTEM_PLL2_200M_CLK:
+	case SYSTEM_PLL2_166M_CLK:
+	case SYSTEM_PLL2_125M_CLK:
+	case SYSTEM_PLL2_100M_CLK:
+	case SYSTEM_PLL2_50M_CLK:
+	case SYSTEM_PLL3_CLK:
+		return decode_intpll(root_src);
+	case DRAM_PLL1_CLK:
+	case AUDIO_PLL1_CLK:
+	case AUDIO_PLL2_CLK:
+	case VIDEO_PLL_CLK:
+		return decode_fracpll(root_src);
+	case ARM_A53_ALT_CLK:
+		return get_root_clk(ARM_A53_CLK_ROOT);
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+static u32 get_root_clk(enum clk_root_index clock_id)
+{
+	enum clk_root_src root_src;
+	u32 post_podf, pre_podf, root_src_clk;
+
+	if (clock_root_enabled(clock_id) <= 0)
+		return 0;
+
+	if (clock_get_prediv(clock_id, &pre_podf) < 0)
+		return 0;
+
+	if (clock_get_postdiv(clock_id, &post_podf) < 0)
+		return 0;
+
+	if (clock_get_src(clock_id, &root_src) < 0)
+		return 0;
+
+	root_src_clk = get_root_src_clk(root_src);
+
+	return root_src_clk / (post_podf + 1) / (pre_podf + 1);
+}
+
+u32 get_arm_core_clk(void)
+{
+	enum clk_root_src root_src;
+	u32 root_src_clk;
+
+	if (clock_get_src(CORE_SEL_CFG, &root_src) < 0)
+		return 0;
+
+	root_src_clk = get_root_src_clk(root_src);
+
+	return root_src_clk;
+}
+
+u32 mxc_get_clock(enum mxc_clock clk)
+{
+	u32 val;
+
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return get_arm_core_clk();
+	case MXC_IPG_CLK:
+		clock_get_target_val(IPG_CLK_ROOT, &val);
+		val = val & 0x3;
+		return get_root_clk(AHB_CLK_ROOT) / 2 / (val + 1);
+	case MXC_CSPI_CLK:
+		return get_root_clk(ECSPI1_CLK_ROOT);
+	case MXC_ESDHC_CLK:
+		return get_root_clk(USDHC1_CLK_ROOT);
+	case MXC_ESDHC2_CLK:
+		return get_root_clk(USDHC2_CLK_ROOT);
+	case MXC_ESDHC3_CLK:
+		return get_root_clk(USDHC3_CLK_ROOT);
+	case MXC_I2C_CLK:
+		return get_root_clk(I2C1_CLK_ROOT);
+	case MXC_UART_CLK:
+		return get_root_clk(UART1_CLK_ROOT);
+	case MXC_QSPI_CLK:
+		return get_root_clk(QSPI_CLK_ROOT);
+	default:
+		printf("Unsupported mxc_clock %d\n", clk);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_DWC_ETH_QOS
+int set_clk_eqos(enum enet_freq type)
+{
+	u32 target;
+	u32 enet1_ref;
+
+	switch (type) {
+	case ENET_125MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
+		break;
+	case ENET_50MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
+		break;
+	case ENET_25MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* disable the clock first */
+	clock_enable(CCGR_QOS_ETHENET, 0);
+	clock_enable(CCGR_SDMA2, 0);
+
+	/* set enet axi clock 266Mhz */
+	target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET_AXI_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | enet1_ref |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET_QOS_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON |
+		ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
+		CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ENET_QOS_TIMER_CLK_ROOT, target);
+
+	/* enable clock */
+	clock_enable(CCGR_QOS_ETHENET, 1);
+	clock_enable(CCGR_SDMA2, 1);
+
+	return 0;
+}
+
+int imx_eqos_txclk_set_rate(ulong rate)
+{
+	u32 val;
+	u32 eqos_post_div;
+
+	/* disable the clock first */
+	clock_enable(CCGR_QOS_ETHENET, 0);
+	clock_enable(CCGR_SDMA2, 0);
+
+	switch (rate) {
+	case 125000000:
+		eqos_post_div = 1;
+		break;
+	case 25000000:
+		eqos_post_div = 125000000 / 25000000;
+		break;
+	case 2500000:
+		eqos_post_div = 125000000 / 2500000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	clock_get_target_val(ENET_QOS_CLK_ROOT, &val);
+	val &= ~(CLK_ROOT_PRE_DIV_MASK | CLK_ROOT_POST_DIV_MASK);
+	val |= CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+	       CLK_ROOT_POST_DIV(eqos_post_div - 1);
+	clock_set_target_val(ENET_QOS_CLK_ROOT, val);
+
+	/* enable clock */
+	clock_enable(CCGR_QOS_ETHENET, 1);
+	clock_enable(CCGR_SDMA2, 1);
+
+	return 0;
+}
+
+u32 imx_get_eqos_csr_clk(void)
+{
+	return get_root_clk(ENET_AXI_CLK_ROOT);
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int set_clk_enet(enum enet_freq type)
+{
+	u32 target;
+	u32 enet1_ref;
+
+	switch (type) {
+	case ENET_125MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
+		break;
+	case ENET_50MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
+		break;
+	case ENET_25MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* disable the clock first */
+	clock_enable(CCGR_ENET1, 0);
+	clock_enable(CCGR_SIM_ENET, 0);
+
+	/* set enet axi clock 266Mhz */
+	target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET_AXI_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | enet1_ref |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET_REF_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON |
+		ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
+		CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ENET_TIMER_CLK_ROOT, target);
+
+	/* enable clock */
+	clock_enable(CCGR_SIM_ENET, 1);
+	clock_enable(CCGR_ENET1, 1);
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/clock_imx8mq.c b/roms/u-boot/arch/arm/mach-imx/imx8m/clock_imx8mq.c
new file mode 100644
index 000000000..8fecc60ec
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/clock_imx8mq.c
@@ -0,0 +1,828 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <errno.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+
+static struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
+
+static u32 get_root_clk(enum clk_root_index clock_id);
+
+static u32 decode_frac_pll(enum clk_root_src frac_pll)
+{
+	u32 pll_cfg0, pll_cfg1, pllout;
+	u32 pll_refclk_sel, pll_refclk;
+	u32 divr_val, divq_val, divf_val, divff, divfi;
+	u32 pllout_div_shift, pllout_div_mask, pllout_div;
+
+	switch (frac_pll) {
+	case ARM_PLL_CLK:
+		pll_cfg0 = readl(&ana_pll->arm_pll_cfg0);
+		pll_cfg1 = readl(&ana_pll->arm_pll_cfg1);
+		pllout_div_shift = HW_FRAC_ARM_PLL_DIV_SHIFT;
+		pllout_div_mask = HW_FRAC_ARM_PLL_DIV_MASK;
+		break;
+	default:
+		printf("Frac PLL %d not supporte\n", frac_pll);
+		return 0;
+	}
+
+	pllout_div = readl(&ana_pll->frac_pllout_div_cfg);
+	pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;
+
+	/* Power down */
+	if (pll_cfg0 & FRAC_PLL_PD_MASK)
+		return 0;
+
+	/* output not enabled */
+	if ((pll_cfg0 & FRAC_PLL_CLKE_MASK) == 0)
+		return 0;
+
+	pll_refclk_sel = pll_cfg0 & FRAC_PLL_REFCLK_SEL_MASK;
+
+	if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_25M)
+		pll_refclk = 25000000u;
+	else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_27M)
+		pll_refclk = 27000000u;
+	else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_HDMI_PHY_27M)
+		pll_refclk = 27000000u;
+	else
+		pll_refclk = 0;
+
+	if (pll_cfg0 & FRAC_PLL_BYPASS_MASK)
+		return pll_refclk;
+
+	divr_val = (pll_cfg0 & FRAC_PLL_REFCLK_DIV_VAL_MASK) >>
+		FRAC_PLL_REFCLK_DIV_VAL_SHIFT;
+	divq_val = pll_cfg0 & FRAC_PLL_OUTPUT_DIV_VAL_MASK;
+
+	divff = (pll_cfg1 & FRAC_PLL_FRAC_DIV_CTL_MASK) >>
+		FRAC_PLL_FRAC_DIV_CTL_SHIFT;
+	divfi = pll_cfg1 & FRAC_PLL_INT_DIV_CTL_MASK;
+
+	divf_val = 1 + divfi + divff / (1 << 24);
+
+	pllout = pll_refclk / (divr_val + 1) * 8 * divf_val /
+		((divq_val + 1) * 2);
+
+	return pllout / (pllout_div + 1);
+}
+
+static u32 decode_sscg_pll(enum clk_root_src sscg_pll)
+{
+	u32 pll_cfg0, pll_cfg1, pll_cfg2;
+	u32 pll_refclk_sel, pll_refclk;
+	u32 divr1, divr2, divf1, divf2, divq, div;
+	u32 sse;
+	u32 pll_clke;
+	u32 pllout_div_shift, pllout_div_mask, pllout_div;
+	u32 pllout;
+
+	switch (sscg_pll) {
+	case SYSTEM_PLL1_800M_CLK:
+	case SYSTEM_PLL1_400M_CLK:
+	case SYSTEM_PLL1_266M_CLK:
+	case SYSTEM_PLL1_200M_CLK:
+	case SYSTEM_PLL1_160M_CLK:
+	case SYSTEM_PLL1_133M_CLK:
+	case SYSTEM_PLL1_100M_CLK:
+	case SYSTEM_PLL1_80M_CLK:
+	case SYSTEM_PLL1_40M_CLK:
+		pll_cfg0 = readl(&ana_pll->sys_pll1_cfg0);
+		pll_cfg1 = readl(&ana_pll->sys_pll1_cfg1);
+		pll_cfg2 = readl(&ana_pll->sys_pll1_cfg2);
+		pllout_div_shift = HW_SSCG_SYSTEM_PLL1_DIV_SHIFT;
+		pllout_div_mask = HW_SSCG_SYSTEM_PLL1_DIV_MASK;
+		break;
+	case SYSTEM_PLL2_1000M_CLK:
+	case SYSTEM_PLL2_500M_CLK:
+	case SYSTEM_PLL2_333M_CLK:
+	case SYSTEM_PLL2_250M_CLK:
+	case SYSTEM_PLL2_200M_CLK:
+	case SYSTEM_PLL2_166M_CLK:
+	case SYSTEM_PLL2_125M_CLK:
+	case SYSTEM_PLL2_100M_CLK:
+	case SYSTEM_PLL2_50M_CLK:
+		pll_cfg0 = readl(&ana_pll->sys_pll2_cfg0);
+		pll_cfg1 = readl(&ana_pll->sys_pll2_cfg1);
+		pll_cfg2 = readl(&ana_pll->sys_pll2_cfg2);
+		pllout_div_shift = HW_SSCG_SYSTEM_PLL2_DIV_SHIFT;
+		pllout_div_mask = HW_SSCG_SYSTEM_PLL2_DIV_MASK;
+		break;
+	case SYSTEM_PLL3_CLK:
+		pll_cfg0 = readl(&ana_pll->sys_pll3_cfg0);
+		pll_cfg1 = readl(&ana_pll->sys_pll3_cfg1);
+		pll_cfg2 = readl(&ana_pll->sys_pll3_cfg2);
+		pllout_div_shift = HW_SSCG_SYSTEM_PLL3_DIV_SHIFT;
+		pllout_div_mask = HW_SSCG_SYSTEM_PLL3_DIV_MASK;
+		break;
+	case DRAM_PLL1_CLK:
+		pll_cfg0 = readl(&ana_pll->dram_pll_cfg0);
+		pll_cfg1 = readl(&ana_pll->dram_pll_cfg1);
+		pll_cfg2 = readl(&ana_pll->dram_pll_cfg2);
+		pllout_div_shift = HW_SSCG_DRAM_PLL_DIV_SHIFT;
+		pllout_div_mask = HW_SSCG_DRAM_PLL_DIV_MASK;
+		break;
+	default:
+		printf("sscg pll %d not supporte\n", sscg_pll);
+		return 0;
+	}
+
+	switch (sscg_pll) {
+	case DRAM_PLL1_CLK:
+		pll_clke = SSCG_PLL_DRAM_PLL_CLKE_MASK;
+		div = 1;
+		break;
+	case SYSTEM_PLL3_CLK:
+		pll_clke = SSCG_PLL_PLL3_CLKE_MASK;
+		div = 1;
+		break;
+	case SYSTEM_PLL2_1000M_CLK:
+	case SYSTEM_PLL1_800M_CLK:
+		pll_clke = SSCG_PLL_CLKE_MASK;
+		div = 1;
+		break;
+	case SYSTEM_PLL2_500M_CLK:
+	case SYSTEM_PLL1_400M_CLK:
+		pll_clke = SSCG_PLL_DIV2_CLKE_MASK;
+		div = 2;
+		break;
+	case SYSTEM_PLL2_333M_CLK:
+	case SYSTEM_PLL1_266M_CLK:
+		pll_clke = SSCG_PLL_DIV3_CLKE_MASK;
+		div = 3;
+		break;
+	case SYSTEM_PLL2_250M_CLK:
+	case SYSTEM_PLL1_200M_CLK:
+		pll_clke = SSCG_PLL_DIV4_CLKE_MASK;
+		div = 4;
+		break;
+	case SYSTEM_PLL2_200M_CLK:
+	case SYSTEM_PLL1_160M_CLK:
+		pll_clke = SSCG_PLL_DIV5_CLKE_MASK;
+		div = 5;
+		break;
+	case SYSTEM_PLL2_166M_CLK:
+	case SYSTEM_PLL1_133M_CLK:
+		pll_clke = SSCG_PLL_DIV6_CLKE_MASK;
+		div = 6;
+		break;
+	case SYSTEM_PLL2_125M_CLK:
+	case SYSTEM_PLL1_100M_CLK:
+		pll_clke = SSCG_PLL_DIV8_CLKE_MASK;
+		div = 8;
+		break;
+	case SYSTEM_PLL2_100M_CLK:
+	case SYSTEM_PLL1_80M_CLK:
+		pll_clke = SSCG_PLL_DIV10_CLKE_MASK;
+		div = 10;
+		break;
+	case SYSTEM_PLL2_50M_CLK:
+	case SYSTEM_PLL1_40M_CLK:
+		pll_clke = SSCG_PLL_DIV20_CLKE_MASK;
+		div = 20;
+		break;
+	default:
+		printf("sscg pll %d not supporte\n", sscg_pll);
+		return 0;
+	}
+
+	/* Power down */
+	if (pll_cfg0 & SSCG_PLL_PD_MASK)
+		return 0;
+
+	/* output not enabled */
+	if ((pll_cfg0 & pll_clke) == 0)
+		return 0;
+
+	pllout_div = readl(&ana_pll->sscg_pllout_div_cfg);
+	pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;
+
+	pll_refclk_sel = pll_cfg0 & SSCG_PLL_REFCLK_SEL_MASK;
+
+	if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_25M)
+		pll_refclk = 25000000u;
+	else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_27M)
+		pll_refclk = 27000000u;
+	else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_HDMI_PHY_27M)
+		pll_refclk = 27000000u;
+	else
+		pll_refclk = 0;
+
+	/* We assume bypass1/2 are the same value */
+	if ((pll_cfg0 & SSCG_PLL_BYPASS1_MASK) ||
+	    (pll_cfg0 & SSCG_PLL_BYPASS2_MASK))
+		return pll_refclk;
+
+	divr1 = (pll_cfg2 & SSCG_PLL_REF_DIVR1_MASK) >>
+		SSCG_PLL_REF_DIVR1_SHIFT;
+	divr2 = (pll_cfg2 & SSCG_PLL_REF_DIVR2_MASK) >>
+		SSCG_PLL_REF_DIVR2_SHIFT;
+	divf1 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F1_MASK) >>
+		SSCG_PLL_FEEDBACK_DIV_F1_SHIFT;
+	divf2 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F2_MASK) >>
+		SSCG_PLL_FEEDBACK_DIV_F2_SHIFT;
+	divq = (pll_cfg2 & SSCG_PLL_OUTPUT_DIV_VAL_MASK) >>
+		SSCG_PLL_OUTPUT_DIV_VAL_SHIFT;
+	sse = pll_cfg1 & SSCG_PLL_SSE_MASK;
+
+	if (sse)
+		sse = 8;
+	else
+		sse = 2;
+
+	pllout = pll_refclk / (divr1 + 1) * sse * (divf1 + 1) /
+		(divr2 + 1) * (divf2 + 1) / (divq + 1);
+
+	return pllout / (pllout_div + 1) / div;
+}
+
+static u32 get_root_src_clk(enum clk_root_src root_src)
+{
+	switch (root_src) {
+	case OSC_25M_CLK:
+		return 25000000;
+	case OSC_27M_CLK:
+		return 27000000;
+	case OSC_32K_CLK:
+		return 32768;
+	case ARM_PLL_CLK:
+		return decode_frac_pll(root_src);
+	case SYSTEM_PLL1_800M_CLK:
+	case SYSTEM_PLL1_400M_CLK:
+	case SYSTEM_PLL1_266M_CLK:
+	case SYSTEM_PLL1_200M_CLK:
+	case SYSTEM_PLL1_160M_CLK:
+	case SYSTEM_PLL1_133M_CLK:
+	case SYSTEM_PLL1_100M_CLK:
+	case SYSTEM_PLL1_80M_CLK:
+	case SYSTEM_PLL1_40M_CLK:
+	case SYSTEM_PLL2_1000M_CLK:
+	case SYSTEM_PLL2_500M_CLK:
+	case SYSTEM_PLL2_333M_CLK:
+	case SYSTEM_PLL2_250M_CLK:
+	case SYSTEM_PLL2_200M_CLK:
+	case SYSTEM_PLL2_166M_CLK:
+	case SYSTEM_PLL2_125M_CLK:
+	case SYSTEM_PLL2_100M_CLK:
+	case SYSTEM_PLL2_50M_CLK:
+	case SYSTEM_PLL3_CLK:
+		return decode_sscg_pll(root_src);
+	case ARM_A53_ALT_CLK:
+		return get_root_clk(ARM_A53_CLK_ROOT);
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+static u32 get_root_clk(enum clk_root_index clock_id)
+{
+	enum clk_root_src root_src;
+	u32 post_podf, pre_podf, root_src_clk;
+
+	if (clock_root_enabled(clock_id) <= 0)
+		return 0;
+
+	if (clock_get_prediv(clock_id, &pre_podf) < 0)
+		return 0;
+
+	if (clock_get_postdiv(clock_id, &post_podf) < 0)
+		return 0;
+
+	if (clock_get_src(clock_id, &root_src) < 0)
+		return 0;
+
+	root_src_clk = get_root_src_clk(root_src);
+
+	return root_src_clk / (post_podf + 1) / (pre_podf + 1);
+}
+
+#ifdef CONFIG_IMX_HAB
+void hab_caam_clock_enable(unsigned char enable)
+{
+	/* The CAAM clock is always on for iMX8M */
+}
+#endif
+
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+	clock_enable(CCGR_OCOTP, !!enable);
+}
+#endif
+
+int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
+{
+	/* 0 - 3 is valid i2c num */
+	if (i2c_num > 3)
+		return -EINVAL;
+
+	clock_enable(CCGR_I2C1 + i2c_num, !!enable);
+
+	return 0;
+}
+
+u32 get_arm_core_clk(void)
+{
+	enum clk_root_src root_src;
+	u32 root_src_clk;
+
+	if (clock_get_src(CORE_SEL_CFG, &root_src) < 0)
+		return 0;
+
+	root_src_clk = get_root_src_clk(root_src);
+
+	return root_src_clk;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	u32 val;
+
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return get_arm_core_clk();
+	case MXC_IPG_CLK:
+		clock_get_target_val(IPG_CLK_ROOT, &val);
+		val = val & 0x3;
+		return get_root_clk(AHB_CLK_ROOT) / (val + 1);
+	case MXC_ESDHC_CLK:
+		return get_root_clk(USDHC1_CLK_ROOT);
+	case MXC_ESDHC2_CLK:
+		return get_root_clk(USDHC2_CLK_ROOT);
+	default:
+		return get_root_clk(clk);
+	}
+}
+
+u32 imx_get_uartclk(void)
+{
+	return mxc_get_clock(UART1_CLK_ROOT);
+}
+
+void mxs_set_lcdclk(u32 base_addr, u32 freq)
+{
+	/*
+	 * LCDIF_PIXEL_CLK: select 800MHz root clock,
+	 * select pre divider 8, output is 100 MHz
+	 */
+	clock_set_target_val(LCDIF_PIXEL_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(4) |
+			     CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV8));
+}
+
+void init_wdog_clk(void)
+{
+	clock_enable(CCGR_WDOG1, 0);
+	clock_enable(CCGR_WDOG2, 0);
+	clock_enable(CCGR_WDOG3, 0);
+	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(0));
+	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(0));
+	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(0));
+	clock_enable(CCGR_WDOG1, 1);
+	clock_enable(CCGR_WDOG2, 1);
+	clock_enable(CCGR_WDOG3, 1);
+}
+
+
+void init_nand_clk(void)
+{
+	clock_enable(CCGR_RAWNAND, 0);
+	clock_set_target_val(NAND_CLK_ROOT,
+			     CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(3) |
+			     CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4));
+	clock_enable(CCGR_RAWNAND, 1);
+}
+
+void init_uart_clk(u32 index)
+{
+	/* Set uart clock root 25M OSC */
+	switch (index) {
+	case 0:
+		clock_enable(CCGR_UART1, 0);
+		clock_set_target_val(UART1_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_UART1, 1);
+		return;
+	case 1:
+		clock_enable(CCGR_UART2, 0);
+		clock_set_target_val(UART2_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_UART2, 1);
+		return;
+	case 2:
+		clock_enable(CCGR_UART3, 0);
+		clock_set_target_val(UART3_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_UART3, 1);
+		return;
+	case 3:
+		clock_enable(CCGR_UART4, 0);
+		clock_set_target_val(UART4_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_UART4, 1);
+		return;
+	default:
+		printf("Invalid uart index\n");
+		return;
+	}
+}
+
+void init_clk_usdhc(u32 index)
+{
+	/*
+	 * set usdhc clock root
+	 * sys pll1 400M
+	 */
+	switch (index) {
+	case 0:
+		clock_enable(CCGR_USDHC1, 0);
+		clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USDHC1, 1);
+		return;
+	case 1:
+		clock_enable(CCGR_USDHC2, 0);
+		clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USDHC2, 1);
+		return;
+	default:
+		printf("Invalid usdhc index\n");
+		return;
+	}
+}
+
+int set_clk_qspi(void)
+{
+	/*
+	 * set qspi root
+	 * sys pll1 100M
+	 */
+	clock_enable(CCGR_QSPI, 0);
+	clock_set_target_val(QSPI_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(7));
+	clock_enable(CCGR_QSPI, 1);
+
+	return 0;
+}
+
+#ifdef CONFIG_FEC_MXC
+int set_clk_enet(enum enet_freq type)
+{
+	u32 target;
+	u32 enet1_ref;
+
+	switch (type) {
+	case ENET_125MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
+		break;
+	case ENET_50MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
+		break;
+	case ENET_25MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* disable the clock first */
+	clock_enable(CCGR_ENET1, 0);
+	clock_enable(CCGR_SIM_ENET, 0);
+
+	/* set enet axi clock 266Mhz */
+	target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET_AXI_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | enet1_ref |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET_REF_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON |
+		ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
+		CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ENET_TIMER_CLK_ROOT, target);
+
+	/* enable clock */
+	clock_enable(CCGR_SIM_ENET, 1);
+	clock_enable(CCGR_ENET1, 1);
+
+	return 0;
+}
+#endif
+
+u32 imx_get_fecclk(void)
+{
+	return get_root_clk(ENET_AXI_CLK_ROOT);
+}
+
+static struct dram_bypass_clk_setting imx8mq_dram_bypass_tbl[] = {
+	DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2,
+				CLK_ROOT_PRE_DIV2),
+	DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2,
+				CLK_ROOT_PRE_DIV2),
+	DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3,
+				CLK_ROOT_PRE_DIV2),
+};
+
+void dram_enable_bypass(ulong clk_val)
+{
+	int i;
+	struct dram_bypass_clk_setting *config;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mq_dram_bypass_tbl); i++) {
+		if (clk_val == imx8mq_dram_bypass_tbl[i].clk)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(imx8mq_dram_bypass_tbl)) {
+		printf("No matched freq table %lu\n", clk_val);
+		return;
+	}
+
+	config = &imx8mq_dram_bypass_tbl[i];
+
+	clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(config->alt_root_sel) |
+			     CLK_ROOT_PRE_DIV(config->alt_pre_div));
+	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(config->apb_root_sel) |
+			     CLK_ROOT_PRE_DIV(config->apb_pre_div));
+	clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(1));
+}
+
+void dram_disable_bypass(void)
+{
+	clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(0));
+	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(4) |
+			     CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void dram_pll_init(ulong pll_val)
+{
+	u32 val;
+	void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0;
+	void __iomem *pll_cfg_reg2 = &ana_pll->dram_pll_cfg2;
+
+	/* Bypass */
+	setbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
+	setbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
+
+	switch (pll_val) {
+	case MHZ(800):
+		val = readl(pll_cfg_reg2);
+		val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+			 SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+			 SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+			 SSCG_PLL_REF_DIVR2_MASK);
+		val |= SSCG_PLL_OUTPUT_DIV_VAL(0);
+		val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
+		val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+		val |= SSCG_PLL_REF_DIVR2_VAL(29);
+		writel(val, pll_cfg_reg2);
+		break;
+	case MHZ(600):
+		val = readl(pll_cfg_reg2);
+		val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+			 SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+			 SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+			 SSCG_PLL_REF_DIVR2_MASK);
+		val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
+		val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(17);
+		val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+		val |= SSCG_PLL_REF_DIVR2_VAL(29);
+		writel(val, pll_cfg_reg2);
+		break;
+	case MHZ(400):
+		val = readl(pll_cfg_reg2);
+		val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+			 SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+			 SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+			 SSCG_PLL_REF_DIVR2_MASK);
+		val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
+		val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
+		val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+		val |= SSCG_PLL_REF_DIVR2_VAL(29);
+		writel(val, pll_cfg_reg2);
+		break;
+	case MHZ(167):
+		val = readl(pll_cfg_reg2);
+		val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+			 SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+			 SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+			 SSCG_PLL_REF_DIVR2_MASK);
+		val |= SSCG_PLL_OUTPUT_DIV_VAL(3);
+		val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(8);
+		val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(45);
+		val |= SSCG_PLL_REF_DIVR2_VAL(30);
+		writel(val, pll_cfg_reg2);
+		break;
+	default:
+		break;
+	}
+
+	/* Clear power down bit */
+	clrbits_le32(pll_control_reg, SSCG_PLL_PD_MASK);
+	/* Eanble ARM_PLL/SYS_PLL  */
+	setbits_le32(pll_control_reg, SSCG_PLL_DRAM_PLL_CLKE_MASK);
+
+	/* Clear bypass */
+	clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
+	__udelay(100);
+	clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
+	/* Wait lock */
+	while (!(readl(pll_control_reg) & SSCG_PLL_LOCK_MASK))
+		;
+}
+
+static int frac_pll_init(u32 pll, enum frac_pll_out_val val)
+{
+	void __iomem *pll_cfg0, __iomem *pll_cfg1;
+	u32 val_cfg0, val_cfg1, divq;
+	int ret;
+
+	switch (pll) {
+	case ANATOP_ARM_PLL:
+		pll_cfg0 = &ana_pll->arm_pll_cfg0;
+		pll_cfg1 = &ana_pll->arm_pll_cfg1;
+
+		if (val == FRAC_PLL_OUT_1000M) {
+			val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(49);
+			divq = 0;
+		} else {
+			val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(79);
+			divq = 1;
+		}
+		val_cfg0 = FRAC_PLL_CLKE_MASK | FRAC_PLL_REFCLK_SEL_OSC_25M |
+			FRAC_PLL_LOCK_SEL_MASK | FRAC_PLL_NEWDIV_VAL_MASK |
+			FRAC_PLL_REFCLK_DIV_VAL(4) |
+			FRAC_PLL_OUTPUT_DIV_VAL(divq);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* bypass the clock */
+	setbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
+	/* Set the value */
+	writel(val_cfg1, pll_cfg1);
+	writel(val_cfg0 | FRAC_PLL_BYPASS_MASK, pll_cfg0);
+	val_cfg0 = readl(pll_cfg0);
+	/* unbypass the clock */
+	clrbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
+	ret = readl_poll_timeout(pll_cfg0, val_cfg0,
+				 val_cfg0 & FRAC_PLL_LOCK_MASK, 1);
+	if (ret)
+		printf("%s timeout\n", __func__);
+	clrbits_le32(pll_cfg0, FRAC_PLL_NEWDIV_VAL_MASK);
+
+	return 0;
+}
+
+
+int clock_init(void)
+{
+	u32 grade;
+
+	clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(0));
+
+	/*
+	 * 8MQ only supports two grades: consumer and industrial.
+	 * We set ARM clock to 1Ghz for consumer, 800Mhz for industrial
+	 */
+	grade = get_cpu_temp_grade(NULL, NULL);
+	if (!grade)
+		frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_1000M);
+	else
+		frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_800M);
+
+	/* Bypass CCM A53 ROOT, Switch to ARM PLL -> MUX-> CPU */
+	clock_set_target_val(CORE_SEL_CFG, CLK_ROOT_SOURCE_SEL(1));
+
+	/*
+	 * According to ANAMIX SPEC
+	 * sys pll1 fixed at 800MHz
+	 * sys pll2 fixed at 1GHz
+	 * Here we only enable the outputs.
+	 */
+	setbits_le32(&ana_pll->sys_pll1_cfg0, SSCG_PLL_CLKE_MASK |
+		     SSCG_PLL_DIV2_CLKE_MASK | SSCG_PLL_DIV3_CLKE_MASK |
+		     SSCG_PLL_DIV4_CLKE_MASK | SSCG_PLL_DIV5_CLKE_MASK |
+		     SSCG_PLL_DIV6_CLKE_MASK | SSCG_PLL_DIV8_CLKE_MASK |
+		     SSCG_PLL_DIV10_CLKE_MASK | SSCG_PLL_DIV20_CLKE_MASK);
+
+	setbits_le32(&ana_pll->sys_pll2_cfg0, SSCG_PLL_CLKE_MASK |
+		     SSCG_PLL_DIV2_CLKE_MASK | SSCG_PLL_DIV3_CLKE_MASK |
+		     SSCG_PLL_DIV4_CLKE_MASK | SSCG_PLL_DIV5_CLKE_MASK |
+		     SSCG_PLL_DIV6_CLKE_MASK | SSCG_PLL_DIV8_CLKE_MASK |
+		     SSCG_PLL_DIV10_CLKE_MASK | SSCG_PLL_DIV20_CLKE_MASK);
+
+	clock_set_target_val(NAND_USDHC_BUS_CLK_ROOT, CLK_ROOT_ON |
+			     CLK_ROOT_SOURCE_SEL(1));
+
+	init_wdog_clk();
+	clock_enable(CCGR_TSENSOR, 1);
+	clock_enable(CCGR_OCOTP, 1);
+
+	/* config GIC ROOT to sys_pll2_200m */
+	clock_enable(CCGR_GIC, 0);
+	clock_set_target_val(GIC_CLK_ROOT,
+			     CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(1));
+	clock_enable(CCGR_GIC, 1);
+
+	return 0;
+}
+#endif
+
+/*
+ * Dump some clockes.
+ */
+#ifndef CONFIG_SPL_BUILD
+static int do_imx8m_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+			       char *const argv[])
+{
+	u32 freq;
+
+	freq = decode_frac_pll(ARM_PLL_CLK);
+	printf("ARM_PLL    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(DRAM_PLL1_CLK);
+	printf("DRAM_PLL    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_800M_CLK);
+	printf("SYS_PLL1_800    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_400M_CLK);
+	printf("SYS_PLL1_400    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_266M_CLK);
+	printf("SYS_PLL1_266    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_200M_CLK);
+	printf("SYS_PLL1_200    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_160M_CLK);
+	printf("SYS_PLL1_160    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_133M_CLK);
+	printf("SYS_PLL1_133    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_100M_CLK);
+	printf("SYS_PLL1_100    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_80M_CLK);
+	printf("SYS_PLL1_80    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL1_40M_CLK);
+	printf("SYS_PLL1_40    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_1000M_CLK);
+	printf("SYS_PLL2_1000    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_500M_CLK);
+	printf("SYS_PLL2_500    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_333M_CLK);
+	printf("SYS_PLL2_333    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_250M_CLK);
+	printf("SYS_PLL2_250    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_200M_CLK);
+	printf("SYS_PLL2_200    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_166M_CLK);
+	printf("SYS_PLL2_166    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_125M_CLK);
+	printf("SYS_PLL2_125    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_100M_CLK);
+	printf("SYS_PLL2_100    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL2_50M_CLK);
+	printf("SYS_PLL2_50    %8d MHz\n", freq / 1000000);
+	freq = decode_sscg_pll(SYSTEM_PLL3_CLK);
+	printf("SYS_PLL3       %8d MHz\n", freq / 1000000);
+	freq = mxc_get_clock(UART1_CLK_ROOT);
+	printf("UART1          %8d MHz\n", freq / 1000000);
+	freq = mxc_get_clock(USDHC1_CLK_ROOT);
+	printf("USDHC1         %8d MHz\n", freq / 1000000);
+	freq = mxc_get_clock(QSPI_CLK_ROOT);
+	printf("QSPI           %8d MHz\n", freq / 1000000);
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_imx8m_showclocks,
+	"display clocks",
+	""
+);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/clock_slice.c b/roms/u-boot/arch/arm/mach-imx/imx8m/clock_slice.c
new file mode 100644
index 000000000..b5ed27a92
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/clock_slice.c
@@ -0,0 +1,1871 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/io.h>
+#include <errno.h>
+
+static struct ccm_reg *ccm_reg = (struct ccm_reg *)CCM_BASE_ADDR;
+
+#ifdef CONFIG_IMX8MQ
+static struct clk_root_map root_array[] = {
+	{ARM_A53_CLK_ROOT, CORE_CLOCK_SLICE, 0,
+	 {OSC_25M_CLK, ARM_PLL_CLK, SYSTEM_PLL2_500M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL3_CLK}
+	},
+	{ARM_M4_CLK_ROOT, CORE_CLOCK_SLICE, 1,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{VPU_A53_CLK_ROOT, CORE_CLOCK_SLICE, 2,
+	 {OSC_25M_CLK, ARM_PLL_CLK, SYSTEM_PLL2_500M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL1_CLK, VPU_PLL_CLK}
+	},
+	{GPU_CORE_CLK_ROOT, CORE_CLOCK_SLICE, 3,
+	 {OSC_25M_CLK, GPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{GPU_SHADER_CLK_ROOT, CORE_CLOCK_SLICE, 4,
+	 {OSC_25M_CLK, GPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{MAIN_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 0,
+	 {OSC_25M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{ENET_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 1,
+	 {OSC_25M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_200M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{NAND_USDHC_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 2,
+	 {OSC_25M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_133M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL1_CLK}
+	},
+	{VPU_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 3,
+	 {OSC_25M_CLK, SYSTEM_PLL1_800M_CLK, VPU_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{DISPLAY_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 4,
+	 {OSC_25M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_400M_CLK, AUDIO_PLL2_CLK,
+	  EXT_CLK_1, EXT_CLK_4}
+	},
+	{DISPLAY_APB_CLK_ROOT, BUS_CLOCK_SLICE, 5,
+	 {OSC_25M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_400M_CLK, AUDIO_PLL2_CLK,
+	  EXT_CLK_1, EXT_CLK_3}
+	},
+	{DISPLAY_RTRM_CLK_ROOT, BUS_CLOCK_SLICE, 6,
+	 {OSC_25M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  EXT_CLK_2, EXT_CLK_3}
+	},
+	{USB_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 7,
+	 {OSC_25M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{GPU_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 8,
+	 {OSC_25M_CLK, SYSTEM_PLL1_800M_CLK, GPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{GPU_AHB_CLK_ROOT, BUS_CLOCK_SLICE, 9,
+	 {OSC_25M_CLK, SYSTEM_PLL1_800M_CLK, GPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NOC_CLK_ROOT, BUS_CLOCK_SLICE, 10,
+	 {OSC_25M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_500M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NOC_APB_CLK_ROOT, BUS_CLOCK_SLICE, 11,
+	 {OSC_25M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_800M_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{AHB_CLK_ROOT, AHB_CLOCK_SLICE, 0,
+	 {OSC_25M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{IPG_CLK_ROOT, IPG_CLOCK_SLICE, 0,
+	 {}
+	},
+	{AUDIO_AHB_CLK_ROOT, AHB_CLOCK_SLICE, 1,
+	 {OSC_25M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_166M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_DSI_ESC_RX_CLK_ROOT, AHB_CLOCK_SLICE, 2,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL1_CLK },
+	},
+	{DRAM_ALT_CLK_ROOT, IP_CLOCK_SLICE, 0,
+	 {OSC_25M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL1_100M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL1_266M_CLK}
+	},
+	{DRAM_APB_CLK_ROOT, IP_CLOCK_SLICE, 1,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{VPU_G1_CLK_ROOT, IP_CLOCK_SLICE, 2,
+	 {OSC_25M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_100M_CLK,
+	  SYSTEM_PLL2_125M_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK}
+	},
+	{VPU_G2_CLK_ROOT, IP_CLOCK_SLICE, 3,
+	 {OSC_25M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_100M_CLK,
+	  SYSTEM_PLL2_125M_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK}
+	},
+	{DISPLAY_DTRC_CLK_ROOT, IP_CLOCK_SLICE, 4,
+	 {OSC_25M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK}
+	},
+	{DISPLAY_DC8000_CLK_ROOT, IP_CLOCK_SLICE, 5,
+	 {OSC_25M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK}
+	},
+	{PCIE1_CTRL_CLK_ROOT, IP_CLOCK_SLICE, 6,
+	 {OSC_25M_CLK, SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL3_CLK}
+	},
+	{PCIE1_PHY_CLK_ROOT, IP_CLOCK_SLICE, 7,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_500M_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3, EXT_CLK_4,
+	  SYSTEM_PLL1_400M_CLK}
+	},
+	{PCIE1_AUX_CLK_ROOT, IP_CLOCK_SLICE, 8,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_200M_CLK}
+	},
+	{DC_PIXEL_CLK_ROOT, IP_CLOCK_SLICE, 9,
+	 {OSC_25M_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  AUDIO_PLL1_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_4}
+	},
+	{LCDIF_PIXEL_CLK_ROOT, IP_CLOCK_SLICE, 10,
+	 {OSC_25M_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  AUDIO_PLL1_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_4}
+	},
+	{SAI1_CLK_ROOT, IP_CLOCK_SLICE, 11,
+	 {OSC_25M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_27M_CLK, EXT_CLK_1, EXT_CLK_2}
+	},
+	{SAI2_CLK_ROOT, IP_CLOCK_SLICE, 12,
+	 {OSC_25M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_27M_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{SAI3_CLK_ROOT, IP_CLOCK_SLICE, 13,
+	 {OSC_25M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_27M_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{SAI4_CLK_ROOT, IP_CLOCK_SLICE, 14,
+	 {OSC_25M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_27M_CLK, EXT_CLK_1, EXT_CLK_2}
+	},
+	{SAI5_CLK_ROOT, IP_CLOCK_SLICE, 15,
+	 {OSC_25M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_27M_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{SAI6_CLK_ROOT, IP_CLOCK_SLICE, 16,
+	 {OSC_25M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_27M_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{SPDIF1_CLK_ROOT, IP_CLOCK_SLICE, 17,
+	 {OSC_25M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_27M_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{SPDIF2_CLK_ROOT, IP_CLOCK_SLICE, 18,
+	 {OSC_25M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_27M_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{ENET_REF_CLK_ROOT, IP_CLOCK_SLICE, 19,
+	 {OSC_25M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, EXT_CLK_4}
+	},
+	{ENET_TIMER_CLK_ROOT, IP_CLOCK_SLICE, 20,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, AUDIO_PLL1_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3, EXT_CLK_4,
+	  VIDEO_PLL_CLK}
+	},
+	{ENET_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 21,
+	 {OSC_25M_CLK, SYSTEM_PLL2_50M_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_500M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NAND_CLK_ROOT, IP_CLOCK_SLICE, 22,
+	 {OSC_25M_CLK, SYSTEM_PLL2_500M_CLK, AUDIO_PLL1_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_250M_CLK, VIDEO_PLL_CLK}
+	},
+	{QSPI_CLK_ROOT, IP_CLOCK_SLICE, 23,
+	 {OSC_25M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL3_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{USDHC1_CLK_ROOT, IP_CLOCK_SLICE, 24,
+	 {OSC_25M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL3_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{USDHC2_CLK_ROOT, IP_CLOCK_SLICE, 25,
+	 {OSC_25M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL3_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{I2C1_CLK_ROOT, IP_CLOCK_SLICE, 26,
+	 {OSC_25M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C2_CLK_ROOT, IP_CLOCK_SLICE, 27,
+	 {OSC_25M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C3_CLK_ROOT, IP_CLOCK_SLICE, 28,
+	 {OSC_25M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C4_CLK_ROOT, IP_CLOCK_SLICE, 29,
+	 {OSC_25M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{UART1_CLK_ROOT, IP_CLOCK_SLICE, 30,
+	 {OSC_25M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{UART2_CLK_ROOT, IP_CLOCK_SLICE, 31,
+	 {OSC_25M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{UART3_CLK_ROOT, IP_CLOCK_SLICE, 32,
+	 {OSC_25M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{UART4_CLK_ROOT, IP_CLOCK_SLICE, 33,
+	 {OSC_25M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{USB_CORE_REF_CLK_ROOT, IP_CLOCK_SLICE, 34,
+	 {OSC_25M_CLK, SYSTEM_PLL1_100M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{USB_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 35,
+	 {OSC_25M_CLK, SYSTEM_PLL1_100M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{GIC_CLK_ROOT, IP_CLOCK_SLICE, 36,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_800M_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{ECSPI1_CLK_ROOT, IP_CLOCK_SLICE, 37,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{ECSPI2_CLK_ROOT, IP_CLOCK_SLICE, 38,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{PWM1_CLK_ROOT, IP_CLOCK_SLICE, 39,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM2_CLK_ROOT, IP_CLOCK_SLICE, 40,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM3_CLK_ROOT, IP_CLOCK_SLICE, 41,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM4_CLK_ROOT, IP_CLOCK_SLICE, 42,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{GPT1_CLK_ROOT, IP_CLOCK_SLICE, 43,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1}
+	},
+	{GPT2_CLK_ROOT, IP_CLOCK_SLICE, 44,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_2}
+	},
+	{GPT3_CLK_ROOT, IP_CLOCK_SLICE, 45,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_3}
+	},
+	{GPT4_CLK_ROOT, IP_CLOCK_SLICE, 46,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1}
+	},
+	{GPT5_CLK_ROOT, IP_CLOCK_SLICE, 47,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_2}
+	},
+	{GPT6_CLK_ROOT, IP_CLOCK_SLICE, 48,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_3}
+	},
+	{TRACE_CLK_ROOT, IP_CLOCK_SLICE, 49,
+	 {OSC_25M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_1, EXT_CLK_3}
+	},
+	{WDOG_CLK_ROOT, IP_CLOCK_SLICE, 50,
+	 {OSC_25M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_166M_CLK}
+	},
+	{WRCLK_CLK_ROOT, IP_CLOCK_SLICE, 51,
+	 {OSC_25M_CLK, SYSTEM_PLL1_40M_CLK, VPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{IPP_DO_CLKO1, IP_CLOCK_SLICE, 52,
+	 {OSC_25M_CLK, SYSTEM_PLL1_800M_CLK, OSC_27M_CLK,
+	  SYSTEM_PLL1_200M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL2_500M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_80M_CLK}
+	},
+	{IPP_DO_CLKO2, IP_CLOCK_SLICE, 53,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL2_166M_CLK, SYSTEM_PLL3_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, OSC_32K_CLK}
+	},
+	{MIPI_DSI_CORE_CLK_ROOT, IP_CLOCK_SLICE, 54,
+	 {OSC_25M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_DSI_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 55,
+	 {OSC_25M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_DSI_DBI_CLK_ROOT, IP_CLOCK_SLICE, 56,
+	 {OSC_25M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{OLD_MIPI_DSI_ESC_CLK_ROOT, IP_CLOCK_SLICE, 57,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{MIPI_CSI1_CORE_CLK_ROOT, IP_CLOCK_SLICE, 58,
+	 {OSC_25M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI1_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 59,
+	 {OSC_25M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI1_ESC_CLK_ROOT, IP_CLOCK_SLICE, 60,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{MIPI_CSI2_CORE_CLK_ROOT, IP_CLOCK_SLICE, 61,
+	 {OSC_25M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI2_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 62,
+	 {OSC_25M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI2_ESC_CLK_ROOT, IP_CLOCK_SLICE, 63,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{PCIE2_CTRL_CLK_ROOT, IP_CLOCK_SLICE, 64,
+	 {OSC_25M_CLK, SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL3_CLK}
+	},
+	{PCIE2_PHY_CLK_ROOT, IP_CLOCK_SLICE, 65,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_500M_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3,
+	  EXT_CLK_4, SYSTEM_PLL1_400M_CLK}
+	},
+	{PCIE2_AUX_CLK_ROOT, IP_CLOCK_SLICE, 66,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_80M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_200M_CLK}
+	},
+	{ECSPI3_CLK_ROOT, IP_CLOCK_SLICE, 67,
+	 {OSC_25M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{OLD_MIPI_DSI_ESC_RX_ROOT, IP_CLOCK_SLICE, 68,
+	 {OSC_25M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK},
+	},
+	{DISPLAY_HDMI_CLK_ROOT, IP_CLOCK_SLICE, 69,
+	 {OSC_25M_CLK, SYSTEM_PLL1_200M_CLK, SYSTEM_PLL2_200M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_4}
+	},
+	{DRAM_SEL_CFG, DRAM_SEL_CLOCK_SLICE, 0,
+	 {DRAM_PLL1_CLK}
+	},
+	{CORE_SEL_CFG, CORE_SEL_CLOCK_SLICE, 0,
+	 {ARM_A53_ALT_CLK, ARM_PLL_CLK}
+	},
+};
+#elif defined(CONFIG_IMX8MM)
+static struct clk_root_map root_array[] = {
+	{ARM_A53_CLK_ROOT, CORE_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, ARM_PLL_CLK, SYSTEM_PLL2_500M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL3_CLK}
+	},
+	{ARM_M4_CLK_ROOT, CORE_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{VPU_A53_CLK_ROOT, CORE_CLOCK_SLICE, 2,
+	 {OSC_24M_CLK, ARM_PLL_CLK, SYSTEM_PLL2_500M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL1_CLK, VPU_PLL_CLK}
+	},
+	{GPU3D_CLK_ROOT, CORE_CLOCK_SLICE, 3,
+	 {OSC_24M_CLK, GPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{GPU2D_CLK_ROOT, CORE_CLOCK_SLICE, 4,
+	 {OSC_24M_CLK, GPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{MAIN_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{ENET_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_200M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{NAND_USDHC_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 2,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_133M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL1_CLK}
+	},
+	{VPU_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 3,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, VPU_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{DISPLAY_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 4,
+	 {OSC_24M_CLK, SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_40M_CLK, AUDIO_PLL2_CLK,
+	  EXT_CLK_1, EXT_CLK_4}
+	},
+	{DISPLAY_APB_CLK_ROOT, BUS_CLOCK_SLICE, 5,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_40M_CLK, AUDIO_PLL2_CLK,
+	  EXT_CLK_1, EXT_CLK_3}
+	},
+	{DISPLAY_RTRM_CLK_ROOT, BUS_CLOCK_SLICE, 6,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  EXT_CLK_2, EXT_CLK_3}
+	},
+	{USB_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 7,
+	 {OSC_24M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{GPU_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 8,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, GPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{GPU_AHB_CLK_ROOT, BUS_CLOCK_SLICE, 9,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, GPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NOC_CLK_ROOT, BUS_CLOCK_SLICE, 10,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_500M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NOC_APB_CLK_ROOT, BUS_CLOCK_SLICE, 11,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_800M_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{AHB_CLK_ROOT, AHB_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{AUDIO_AHB_CLK_ROOT, AHB_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_166M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_DSI_ESC_RX_CLK_ROOT, AHB_CLOCK_SLICE, 2,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{DRAM_ALT_CLK_ROOT, IP_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL1_100M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL1_266M_CLK}
+	},
+	{DRAM_APB_CLK_ROOT, IP_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{VPU_G1_CLK_ROOT, IP_CLOCK_SLICE, 2,
+	 {OSC_24M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_100M_CLK,
+	  SYSTEM_PLL2_125M_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK}
+	},
+	{VPU_G2_CLK_ROOT, IP_CLOCK_SLICE, 3,
+	 {OSC_24M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_100M_CLK,
+	  SYSTEM_PLL2_125M_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK}
+	},
+	{DISPLAY_DTRC_CLK_ROOT, IP_CLOCK_SLICE, 4,
+	 {OSC_24M_CLK, VIDEO_PLL2_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK}
+	},
+	{DISPLAY_DC8000_CLK_ROOT, IP_CLOCK_SLICE, 5,
+	 {OSC_24M_CLK, VIDEO_PLL2_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK}
+	},
+	{PCIE_CTRL_CLK_ROOT, IP_CLOCK_SLICE, 6,
+	 {OSC_24M_CLK, SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL3_CLK}
+	},
+	{PCIE_PHY_CLK_ROOT, IP_CLOCK_SLICE, 7,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_500M_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3, EXT_CLK_4,
+	  SYSTEM_PLL1_400M_CLK}
+	},
+	{PCIE_AUX_CLK_ROOT, IP_CLOCK_SLICE, 8,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_200M_CLK}
+	},
+	{DC_PIXEL_CLK_ROOT, IP_CLOCK_SLICE, 9,
+	 {OSC_24M_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  AUDIO_PLL1_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_4}
+	},
+	{LCDIF_PIXEL_CLK_ROOT, IP_CLOCK_SLICE, 10,
+	 {OSC_24M_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  AUDIO_PLL1_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_4}
+	},
+	{SAI1_CLK_ROOT, IP_CLOCK_SLICE, 11,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_1, EXT_CLK_2}
+	},
+	{SAI2_CLK_ROOT, IP_CLOCK_SLICE, 12,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{SAI3_CLK_ROOT, IP_CLOCK_SLICE, 13,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{SAI4_CLK_ROOT, IP_CLOCK_SLICE, 14,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_1, EXT_CLK_2}
+	},
+	{SAI5_CLK_ROOT, IP_CLOCK_SLICE, 15,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{SAI6_CLK_ROOT, IP_CLOCK_SLICE, 16,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{SPDIF1_CLK_ROOT, IP_CLOCK_SLICE, 17,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{SPDIF2_CLK_ROOT, IP_CLOCK_SLICE, 18,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{ENET_REF_CLK_ROOT, IP_CLOCK_SLICE, 19,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, EXT_CLK_4}
+	},
+	{ENET_TIMER_CLK_ROOT, IP_CLOCK_SLICE, 20,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, AUDIO_PLL1_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3, EXT_CLK_4,
+	  VIDEO_PLL_CLK}
+	},
+	{ENET_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 21,
+	 {OSC_24M_CLK, SYSTEM_PLL2_50M_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_500M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NAND_CLK_ROOT, IP_CLOCK_SLICE, 22,
+	 {OSC_24M_CLK, SYSTEM_PLL2_500M_CLK, AUDIO_PLL1_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_250M_CLK, VIDEO_PLL_CLK}
+	},
+	{QSPI_CLK_ROOT, IP_CLOCK_SLICE, 23,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL2_333M_CLK,
+	  SYSTEM_PLL2_500M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL3_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{USDHC1_CLK_ROOT, IP_CLOCK_SLICE, 24,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{USDHC2_CLK_ROOT, IP_CLOCK_SLICE, 25,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{I2C1_CLK_ROOT, IP_CLOCK_SLICE, 26,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C2_CLK_ROOT, IP_CLOCK_SLICE, 27,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C3_CLK_ROOT, IP_CLOCK_SLICE, 28,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C4_CLK_ROOT, IP_CLOCK_SLICE, 29,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{UART1_CLK_ROOT, IP_CLOCK_SLICE, 30,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{UART2_CLK_ROOT, IP_CLOCK_SLICE, 31,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{UART3_CLK_ROOT, IP_CLOCK_SLICE, 32,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{UART4_CLK_ROOT, IP_CLOCK_SLICE, 33,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{USB_CORE_REF_CLK_ROOT, IP_CLOCK_SLICE, 34,
+	 {OSC_24M_CLK, SYSTEM_PLL1_100M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{USB_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 35,
+	 {OSC_24M_CLK, SYSTEM_PLL1_100M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{GIC_CLK_ROOT, IP_CLOCK_SLICE, 36,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_800M_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{ECSPI1_CLK_ROOT, IP_CLOCK_SLICE, 37,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{ECSPI2_CLK_ROOT, IP_CLOCK_SLICE, 38,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{PWM1_CLK_ROOT, IP_CLOCK_SLICE, 39,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM2_CLK_ROOT, IP_CLOCK_SLICE, 40,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM3_CLK_ROOT, IP_CLOCK_SLICE, 41,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_2,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM4_CLK_ROOT, IP_CLOCK_SLICE, 42,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_2,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{GPT1_CLK_ROOT, IP_CLOCK_SLICE, 43,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1}
+	},
+	{GPT2_CLK_ROOT, IP_CLOCK_SLICE, 44,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_2}
+	},
+	{GPT3_CLK_ROOT, IP_CLOCK_SLICE, 45,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_3}
+	},
+	{GPT4_CLK_ROOT, IP_CLOCK_SLICE, 46,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1}
+	},
+	{GPT5_CLK_ROOT, IP_CLOCK_SLICE, 47,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_2}
+	},
+	{GPT6_CLK_ROOT, IP_CLOCK_SLICE, 48,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_3}
+	},
+	{TRACE_CLK_ROOT, IP_CLOCK_SLICE, 49,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_1, EXT_CLK_3}
+	},
+	{WDOG_CLK_ROOT, IP_CLOCK_SLICE, 50,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_166M_CLK}
+	},
+	{WRCLK_CLK_ROOT, IP_CLOCK_SLICE, 51,
+	 {OSC_24M_CLK, SYSTEM_PLL1_40M_CLK, VPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{IPP_DO_CLKO1, IP_CLOCK_SLICE, 52,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, OSC_HDMI_CLK,
+	  SYSTEM_PLL1_200M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL2_500M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_80M_CLK}
+	},
+	{IPP_DO_CLKO2, IP_CLOCK_SLICE, 53,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL2_166M_CLK, SYSTEM_PLL3_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, OSC_32K_CLK}
+	},
+	{MIPI_DSI_CORE_CLK_ROOT, IP_CLOCK_SLICE, 54,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_DSI_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 55,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_DSI_DBI_CLK_ROOT, IP_CLOCK_SLICE, 56,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{USDHC3_CLK_ROOT, IP_CLOCK_SLICE, 57,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{MIPI_CSI1_CORE_CLK_ROOT, IP_CLOCK_SLICE, 58,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI1_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 59,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI1_ESC_CLK_ROOT, IP_CLOCK_SLICE, 60,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{MIPI_CSI2_CORE_CLK_ROOT, IP_CLOCK_SLICE, 61,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI2_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 62,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI2_ESC_CLK_ROOT, IP_CLOCK_SLICE, 63,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{PCIE2_CTRL_CLK_ROOT, IP_CLOCK_SLICE, 64,
+	 {OSC_24M_CLK, SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL3_CLK}
+	},
+	{PCIE2_PHY_CLK_ROOT, IP_CLOCK_SLICE, 65,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_500M_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3,
+	  EXT_CLK_4, SYSTEM_PLL1_400M_CLK}
+	},
+	{PCIE2_AUX_CLK_ROOT, IP_CLOCK_SLICE, 66,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_80M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_200M_CLK}
+	},
+	{ECSPI3_CLK_ROOT, IP_CLOCK_SLICE, 67,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{PDM_CLK_ROOT, IP_CLOCK_SLICE, 68,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, AUDIO_PLL1_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK},
+	},
+	{VPU_H1_CLK_ROOT, IP_CLOCK_SLICE, 69,
+	 {OSC_24M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL2_125M_CLK, SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK}
+	},
+	{DRAM_SEL_CFG, DRAM_SEL_CLOCK_SLICE, 0,
+	 {DRAM_PLL1_CLK}
+	},
+	{CORE_SEL_CFG, CORE_SEL_CLOCK_SLICE, 0,
+	 {ARM_A53_ALT_CLK, ARM_PLL_CLK}
+	},
+};
+#elif defined(CONFIG_IMX8MN)
+static struct clk_root_map root_array[] = {
+	{ARM_A53_CLK_ROOT, CORE_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, ARM_PLL_CLK, SYSTEM_PLL2_500M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL3_CLK}
+	},
+	{ARM_M7_CLK_ROOT, CORE_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_250M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{GPU_CORE_CLK_ROOT, CORE_CLOCK_SLICE, 3,
+	 {OSC_24M_CLK, GPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{GPU_SHADER_CLK_ROOT, CORE_CLOCK_SLICE, 4,
+	 {OSC_24M_CLK, GPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{MAIN_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{ENET_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_200M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{NAND_USDHC_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 2,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_133M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL1_CLK}
+	},
+	{DISPLAY_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 4,
+	 {OSC_24M_CLK, SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_40M_CLK, AUDIO_PLL2_CLK,
+	  EXT_CLK_1, EXT_CLK_4}
+	},
+	{DISPLAY_APB_CLK_ROOT, BUS_CLOCK_SLICE, 5,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_40M_CLK, AUDIO_PLL2_CLK,
+	  EXT_CLK_1, EXT_CLK_3}
+	},
+	{USB_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 7,
+	 {OSC_24M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{GPU_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 8,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, GPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{GPU_AHB_CLK_ROOT, BUS_CLOCK_SLICE, 9,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, GPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NOC_CLK_ROOT, BUS_CLOCK_SLICE, 10,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_500M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{AHB_CLK_ROOT, AHB_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{AUDIO_AHB_CLK_ROOT, AHB_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_166M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{DRAM_ALT_CLK_ROOT, IP_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL1_100M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL1_266M_CLK}
+	},
+	{DRAM_APB_CLK_ROOT, IP_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{DISPLAY_PIXEL_CLK_ROOT, IP_CLOCK_SLICE, 10,
+	 {OSC_24M_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  AUDIO_PLL1_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_4}
+	},
+	{SAI2_CLK_ROOT, IP_CLOCK_SLICE, 12,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{SAI3_CLK_ROOT, IP_CLOCK_SLICE, 13,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{SAI5_CLK_ROOT, IP_CLOCK_SLICE, 15,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{SAI6_CLK_ROOT, IP_CLOCK_SLICE, 16,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{SPDIF1_CLK_ROOT, IP_CLOCK_SLICE, 17,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_2, EXT_CLK_3}
+	},
+	{ENET_REF_CLK_ROOT, IP_CLOCK_SLICE, 19,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, EXT_CLK_4}
+	},
+	{ENET_TIMER_CLK_ROOT, IP_CLOCK_SLICE, 20,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, AUDIO_PLL1_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3, EXT_CLK_4,
+	  VIDEO_PLL_CLK}
+	},
+	{ENET_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 21,
+	 {OSC_24M_CLK, SYSTEM_PLL2_50M_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_500M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NAND_CLK_ROOT, IP_CLOCK_SLICE, 22,
+	 {OSC_24M_CLK, SYSTEM_PLL2_500M_CLK, AUDIO_PLL1_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_250M_CLK, VIDEO_PLL_CLK}
+	},
+	{QSPI_CLK_ROOT, IP_CLOCK_SLICE, 23,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL2_333M_CLK,
+	  SYSTEM_PLL2_500M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL3_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{USDHC1_CLK_ROOT, IP_CLOCK_SLICE, 24,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{USDHC2_CLK_ROOT, IP_CLOCK_SLICE, 25,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{I2C1_CLK_ROOT, IP_CLOCK_SLICE, 26,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C2_CLK_ROOT, IP_CLOCK_SLICE, 27,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C3_CLK_ROOT, IP_CLOCK_SLICE, 28,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C4_CLK_ROOT, IP_CLOCK_SLICE, 29,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{UART1_CLK_ROOT, IP_CLOCK_SLICE, 30,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{UART2_CLK_ROOT, IP_CLOCK_SLICE, 31,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{UART3_CLK_ROOT, IP_CLOCK_SLICE, 32,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{UART4_CLK_ROOT, IP_CLOCK_SLICE, 33,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{USB_CORE_REF_CLK_ROOT, IP_CLOCK_SLICE, 34,
+	 {OSC_24M_CLK, SYSTEM_PLL1_100M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{USB_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 35,
+	 {OSC_24M_CLK, SYSTEM_PLL1_100M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{GIC_CLK_ROOT, IP_CLOCK_SLICE, 36,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_800M_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{ECSPI1_CLK_ROOT, IP_CLOCK_SLICE, 37,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{ECSPI2_CLK_ROOT, IP_CLOCK_SLICE, 38,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{PWM1_CLK_ROOT, IP_CLOCK_SLICE, 39,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM2_CLK_ROOT, IP_CLOCK_SLICE, 40,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM3_CLK_ROOT, IP_CLOCK_SLICE, 41,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_2,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM4_CLK_ROOT, IP_CLOCK_SLICE, 42,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_2,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{GPT1_CLK_ROOT, IP_CLOCK_SLICE, 43,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1}
+	},
+	{GPT2_CLK_ROOT, IP_CLOCK_SLICE, 44,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_2}
+	},
+	{GPT3_CLK_ROOT, IP_CLOCK_SLICE, 45,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_3}
+	},
+	{GPT4_CLK_ROOT, IP_CLOCK_SLICE, 46,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1}
+	},
+	{GPT5_CLK_ROOT, IP_CLOCK_SLICE, 47,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_2}
+	},
+	{GPT6_CLK_ROOT, IP_CLOCK_SLICE, 48,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_3}
+	},
+	{TRACE_CLK_ROOT, IP_CLOCK_SLICE, 49,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_1, EXT_CLK_3}
+	},
+	{WDOG_CLK_ROOT, IP_CLOCK_SLICE, 50,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_166M_CLK}
+	},
+	{WRCLK_CLK_ROOT, IP_CLOCK_SLICE, 51,
+	 {OSC_24M_CLK, SYSTEM_PLL1_40M_CLK, VPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{IPP_DO_CLKO1, IP_CLOCK_SLICE, 52,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, OSC_HDMI_CLK,
+	  SYSTEM_PLL1_200M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL2_500M_CLK, VPU_PLL_CLK, SYSTEM_PLL1_80M_CLK}
+	},
+	{IPP_DO_CLKO2, IP_CLOCK_SLICE, 53,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL2_166M_CLK, SYSTEM_PLL3_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, OSC_32K_CLK}
+	},
+	{MIPI_DSI_CORE_CLK_ROOT, IP_CLOCK_SLICE, 54,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{DISPLAY_DSI_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 55,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_DSI_DBI_CLK_ROOT, IP_CLOCK_SLICE, 56,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{USDHC3_CLK_ROOT, IP_CLOCK_SLICE, 57,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{DISPLAY_CAMERA_PIXEL_CLK_ROOT, IP_CLOCK_SLICE, 58,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_250M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI1_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 59,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI2_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 62,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MIPI_CSI2_ESC_CLK_ROOT, IP_CLOCK_SLICE, 63,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{ECSPI3_CLK_ROOT, IP_CLOCK_SLICE, 67,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{PDM_CLK_ROOT, IP_CLOCK_SLICE, 68,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, AUDIO_PLL1_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK},
+	},
+	{SAI7_CLK_ROOT, IP_CLOCK_SLICE, 70,
+	 {OSC_24M_CLK, AUDIO_PLL1_CLK, AUDIO_PLL2_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_133M_CLK,
+	  OSC_HDMI_CLK, EXT_CLK_3, EXT_CLK_4}
+	},
+	{DRAM_SEL_CFG, DRAM_SEL_CLOCK_SLICE, 0,
+	 {DRAM_PLL1_CLK}
+	},
+	{CORE_SEL_CFG, CORE_SEL_CLOCK_SLICE, 0,
+	 {ARM_A53_ALT_CLK, ARM_PLL_CLK}
+	},
+};
+#elif defined(CONFIG_IMX8MP)
+static struct clk_root_map root_array[] = {
+	{ARM_A53_CLK_ROOT, CORE_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, ARM_PLL_CLK, SYSTEM_PLL2_500M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL3_CLK}
+	},
+	{ARM_M7_CLK_ROOT, CORE_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_250M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{ML_CLK_ROOT, CORE_CLOCK_SLICE, 2,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_250M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL1_800M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{HSIO_AXI_CLK_ROOT, CORE_CLOCK_SLICE, 7,
+	 {OSC_24M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK, EXT_CLK_2,
+	  EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{MAIN_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_1000M_CLK, AUDIO_PLL1_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{ENET_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_250M_CLK, SYSTEM_PLL2_200M_CLK, AUDIO_PLL1_CLK,
+	  VIDEO_PLL_CLK, SYSTEM_PLL3_CLK}
+	},
+	{NAND_USDHC_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 2,
+	 {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_133M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL1_CLK}
+	},
+	{MEDIA_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 4,
+	 {OSC_24M_CLK, SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_40M_CLK,
+	  AUDIO_PLL2_CLK, EXT_CLK_1, SYSTEM_PLL2_500M_CLK}
+	},
+	{MEDIA_APB_CLK_ROOT, BUS_CLOCK_SLICE, 5,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_40M_CLK,
+	  AUDIO_PLL2_CLK, EXT_CLK_1, SYSTEM_PLL1_133M_CLK}
+	},
+	{HDMI_APB_CLK_ROOT, BUS_CLOCK_SLICE, 6,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_40M_CLK,
+	  AUDIO_PLL2_CLK, EXT_CLK_1, SYSTEM_PLL1_133M_CLK}
+	},
+	{HDMI_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 7,
+	 {OSC_24M_CLK, SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_40M_CLK,
+	  AUDIO_PLL2_CLK, EXT_CLK_1, SYSTEM_PLL2_500M_CLK}
+	},
+	{NOC_CLK_ROOT, BUS_CLOCK_SLICE, 10,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_500M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NOC_IO_CLK_ROOT, BUS_CLOCK_SLICE, 11,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_500M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{ML_AXI_CLK_ROOT, BUS_CLOCK_SLICE, 12,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, GPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{ML_AHB_CLK_ROOT, BUS_CLOCK_SLICE, 13,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, GPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_1000M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{AHB_CLK_ROOT, AHB_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL1_400M_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{MEDIA_DISP2_CLK_ROOT, AHB_CLOCK_SLICE, 3,
+	 {OSC_24M_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  AUDIO_PLL1_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_4}
+	},
+	{DRAM_ALT_CLK_ROOT, IP_CLOCK_SLICE, 0,
+	 {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL1_100M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL1_266M_CLK}
+	},
+	{DRAM_APB_CLK_ROOT, IP_CLOCK_SLICE, 1,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{I2C5_CLK_ROOT, IP_CLOCK_SLICE, 9,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C6_CLK_ROOT, IP_CLOCK_SLICE, 10,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL1_133M_CLK}
+	},
+	{ENET_QOS_CLK_ROOT, IP_CLOCK_SLICE, 17,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, EXT_CLK_4}
+	},
+	{ENET_QOS_TIMER_CLK_ROOT, IP_CLOCK_SLICE, 18,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1,
+	  EXT_CLK_2, EXT_CLK_3, EXT_CLK_4, VIDEO_PLL_CLK}
+	},
+	{ENET_REF_CLK_ROOT, IP_CLOCK_SLICE, 19,
+	 {OSC_24M_CLK, SYSTEM_PLL2_125M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  AUDIO_PLL1_CLK, VIDEO_PLL_CLK, EXT_CLK_4}
+	},
+	{ENET_TIMER_CLK_ROOT, IP_CLOCK_SLICE, 20,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1,
+	  EXT_CLK_2, EXT_CLK_3, EXT_CLK_4, VIDEO_PLL_CLK}
+	},
+	{ENET_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 21,
+	 {OSC_24M_CLK, SYSTEM_PLL2_50M_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL2_200M_CLK, SYSTEM_PLL2_500M_CLK, AUDIO_PLL1_CLK,
+	  VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+	},
+	{NAND_CLK_ROOT, IP_CLOCK_SLICE, 22,
+	 {OSC_24M_CLK, SYSTEM_PLL2_500M_CLK, AUDIO_PLL1_CLK,
+	  SYSTEM_PLL1_400M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_250M_CLK, VIDEO_PLL_CLK}
+	},
+	{QSPI_CLK_ROOT, IP_CLOCK_SLICE, 23,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL2_333M_CLK,
+	  SYSTEM_PLL2_500M_CLK, AUDIO_PLL2_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL3_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{USDHC1_CLK_ROOT, IP_CLOCK_SLICE, 24,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{USDHC2_CLK_ROOT, IP_CLOCK_SLICE, 25,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{I2C1_CLK_ROOT, IP_CLOCK_SLICE, 26,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C2_CLK_ROOT, IP_CLOCK_SLICE, 27,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C3_CLK_ROOT, IP_CLOCK_SLICE, 28,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{I2C4_CLK_ROOT, IP_CLOCK_SLICE, 29,
+	 {OSC_24M_CLK, SYSTEM_PLL1_160M_CLK, SYSTEM_PLL2_50M_CLK,
+	  SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK,
+	  AUDIO_PLL2_CLK, SYSTEM_PLL1_133M_CLK}
+	},
+	{UART1_CLK_ROOT, IP_CLOCK_SLICE, 30,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{UART2_CLK_ROOT, IP_CLOCK_SLICE, 31,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{UART3_CLK_ROOT, IP_CLOCK_SLICE, 32,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{UART4_CLK_ROOT, IP_CLOCK_SLICE, 33,
+	 {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{USB_PHY_REF_CLK_ROOT, IP_CLOCK_SLICE, 35,
+	 {OSC_24M_CLK, SYSTEM_PLL1_100M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL2_200M_CLK,
+	  EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{GIC_CLK_ROOT, IP_CLOCK_SLICE, 36,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_800M_CLK,
+	  EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+	},
+	{ECSPI1_CLK_ROOT, IP_CLOCK_SLICE, 37,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{ECSPI2_CLK_ROOT, IP_CLOCK_SLICE, 38,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{PWM1_CLK_ROOT, IP_CLOCK_SLICE, 39,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM2_CLK_ROOT, IP_CLOCK_SLICE, 40,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_1,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM3_CLK_ROOT, IP_CLOCK_SLICE, 41,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_2,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{PWM4_CLK_ROOT, IP_CLOCK_SLICE, 42,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_160M_CLK,
+	  SYSTEM_PLL1_40M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_2,
+	  SYSTEM_PLL1_80M_CLK, VIDEO_PLL_CLK}
+	},
+	{GPT1_CLK_ROOT, IP_CLOCK_SLICE, 43,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1}
+	},
+	{GPT2_CLK_ROOT, IP_CLOCK_SLICE, 44,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_2}
+	},
+	{GPT3_CLK_ROOT, IP_CLOCK_SLICE, 45,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_3}
+	},
+	{GPT4_CLK_ROOT, IP_CLOCK_SLICE, 46,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_1}
+	},
+	{GPT5_CLK_ROOT, IP_CLOCK_SLICE, 47,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_2}
+	},
+	{GPT6_CLK_ROOT, IP_CLOCK_SLICE, 48,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_400M_CLK,
+	  SYSTEM_PLL1_40M_CLK, VIDEO_PLL_CLK,
+	  SYSTEM_PLL1_80M_CLK, AUDIO_PLL1_CLK, EXT_CLK_3}
+	},
+	{TRACE_CLK_ROOT, IP_CLOCK_SLICE, 49,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_1, EXT_CLK_3}
+	},
+	{WDOG_CLK_ROOT, IP_CLOCK_SLICE, 50,
+	 {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+	  VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_166M_CLK}
+	},
+	{WRCLK_CLK_ROOT, IP_CLOCK_SLICE, 51,
+	 {OSC_24M_CLK, SYSTEM_PLL1_40M_CLK, VPU_PLL_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_200M_CLK,
+	  SYSTEM_PLL1_266M_CLK, SYSTEM_PLL2_500M_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{HDMI_REF_266M_CLK_ROOT, IP_CLOCK_SLICE, 56,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL2_333M_CLK, SYSTEM_PLL1_266M_CLK,
+	  SYSTEM_PLL2_200M_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+	},
+	{USDHC3_CLK_ROOT, IP_CLOCK_SLICE, 57,
+	 {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_500M_CLK, SYSTEM_PLL3_CLK,
+	  SYSTEM_PLL1_266M_CLK, AUDIO_PLL2_CLK, SYSTEM_PLL1_100M_CLK}
+	},
+	{MEDIA_MIPI_PHY1_REF_CLK_ROOT, IP_CLOCK_SLICE, 59,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MEDIA_DISP1_PIX_CLK_ROOT, IP_CLOCK_SLICE, 60,
+	 {OSC_24M_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK,
+	  AUDIO_PLL1_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL3_CLK, EXT_CLK_4}
+	},
+	{MEDIA_LDB_CLK_ROOT, IP_CLOCK_SLICE, 62,
+	 {OSC_24M_CLK, SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_100M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  EXT_CLK_2, AUDIO_PLL2_CLK, VIDEO_PLL_CLK}
+	},
+	{MEMREPAIR_CLK_ROOT, IP_CLOCK_SLICE, 63,
+	 {OSC_24M_CLK, SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_80M_CLK,
+	  SYSTEM_PLL1_800M_CLK, SYSTEM_PLL2_1000M_CLK,
+	  SYSTEM_PLL3_CLK, EXT_CLK_3, AUDIO_PLL2_CLK}
+	},
+	{ECSPI3_CLK_ROOT, IP_CLOCK_SLICE, 67,
+	 {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+	  SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+	  SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+	},
+	{DRAM_SEL_CFG, DRAM_SEL_CLOCK_SLICE, 0,
+	 {DRAM_PLL1_CLK}
+	},
+	{CORE_SEL_CFG, CORE_SEL_CLOCK_SLICE, 0,
+	 {ARM_A53_ALT_CLK, ARM_PLL_CLK}
+	},
+};
+#endif
+
+static int select(enum clk_root_index clock_id)
+{
+	int i, size;
+	struct clk_root_map *p = root_array;
+
+	size = ARRAY_SIZE(root_array);
+
+	for (i = 0; i < size; i++, p++) {
+		if (clock_id == p->entry)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static void __iomem *get_clk_root_target(enum clk_slice_type slice_type,
+					 u32 slice_index)
+{
+	void __iomem *clk_root_target;
+
+	switch (slice_type) {
+	case CORE_CLOCK_SLICE:
+		clk_root_target =
+		(void __iomem *)&ccm_reg->core_root[slice_index];
+		break;
+	case BUS_CLOCK_SLICE:
+		clk_root_target =
+			(void __iomem *)&ccm_reg->bus_root[slice_index];
+		break;
+	case IP_CLOCK_SLICE:
+		clk_root_target =
+			(void __iomem *)&ccm_reg->ip_root[slice_index];
+		break;
+	case AHB_CLOCK_SLICE:
+		clk_root_target =
+			(void __iomem *)&ccm_reg->ahb_ipg_root[slice_index * 2];
+		break;
+	case IPG_CLOCK_SLICE:
+		clk_root_target =
+			(void __iomem *)&ccm_reg->ahb_ipg_root[slice_index * 2 + 1];
+		break;
+	case CORE_SEL_CLOCK_SLICE:
+		clk_root_target = (void __iomem *)&ccm_reg->core_sel;
+		break;
+	case DRAM_SEL_CLOCK_SLICE:
+		clk_root_target = (void __iomem *)&ccm_reg->dram_sel;
+		break;
+	default:
+		return NULL;
+	}
+
+	return clk_root_target;
+}
+
+int clock_get_target_val(enum clk_root_index clock_id, u32 *val)
+{
+	int root_entry;
+	struct clk_root_map *p;
+	void __iomem *clk_root_target;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+	clk_root_target = get_clk_root_target(p->slice_type, p->slice_index);
+	if (!clk_root_target)
+		return -EINVAL;
+
+	*val = readl(clk_root_target);
+
+	return 0;
+}
+
+int clock_set_target_val(enum clk_root_index clock_id, u32 val)
+{
+	int root_entry;
+	struct clk_root_map *p;
+	void __iomem *clk_root_target;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+	clk_root_target = get_clk_root_target(p->slice_type, p->slice_index);
+	if (!clk_root_target)
+		return -EINVAL;
+
+	writel(val, clk_root_target);
+
+	return 0;
+}
+
+int clock_root_enabled(enum clk_root_index clock_id)
+{
+	void __iomem *clk_root_target;
+	u32 slice_index, slice_type;
+	u32 val;
+	int root_entry;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	slice_type = root_array[root_entry].slice_type;
+	slice_index = root_array[root_entry].slice_index;
+
+	if ((slice_type == IPG_CLOCK_SLICE) ||
+	    (slice_type == DRAM_SEL_CLOCK_SLICE) ||
+	    (slice_type == CORE_SEL_CLOCK_SLICE)) {
+		/*
+		 * Not supported, from CCM doc
+		 * TODO
+		 */
+		return 0;
+	}
+
+	clk_root_target = get_clk_root_target(slice_type, slice_index);
+	if (!clk_root_target)
+		return -EINVAL;
+
+	val = readl(clk_root_target);
+
+	return (val & CLK_ROOT_ON) ? 1 : 0;
+}
+
+/* CCGR CLK gate operation */
+int clock_enable(enum clk_ccgr_index index, bool enable)
+{
+	void __iomem *ccgr;
+
+	if (index >= CCGR_MAX)
+		return -EINVAL;
+
+	if (enable)
+		ccgr = (void __iomem *)&ccm_reg->ccgr_array[index].ccgr_set;
+	else
+		ccgr = (void __iomem *)&ccm_reg->ccgr_array[index].ccgr_clr;
+
+	writel(CCGR_CLK_ON_MASK, ccgr);
+
+	return 0;
+}
+
+int clock_get_prediv(enum clk_root_index clock_id, enum root_pre_div *pre_div)
+{
+	u32 val;
+	int root_entry;
+	struct clk_root_map *p;
+	void __iomem *clk_root_target;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+
+	if ((p->slice_type == CORE_CLOCK_SLICE) ||
+	    (p->slice_type == IPG_CLOCK_SLICE) ||
+	    (p->slice_type == CORE_SEL_CLOCK_SLICE) ||
+	    (p->slice_type == DRAM_SEL_CLOCK_SLICE)) {
+		*pre_div = 0;
+		return 0;
+	}
+
+	clk_root_target = get_clk_root_target(p->slice_type, p->slice_index);
+	if (!clk_root_target)
+		return -EINVAL;
+
+	val = readl(clk_root_target);
+	val &= CLK_ROOT_PRE_DIV_MASK;
+	val >>= CLK_ROOT_PRE_DIV_SHIFT;
+
+	*pre_div = val;
+
+	return 0;
+}
+
+int clock_get_postdiv(enum clk_root_index clock_id,
+		      enum root_post_div *post_div)
+{
+	u32 val, mask;
+	int root_entry;
+	struct clk_root_map *p;
+	void __iomem *clk_root_target;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+
+	if ((p->slice_type == CORE_SEL_CLOCK_SLICE) ||
+	    (p->slice_type == DRAM_SEL_CLOCK_SLICE)) {
+		*post_div = 0;
+		return 0;
+	}
+
+	clk_root_target = get_clk_root_target(p->slice_type, p->slice_index);
+	if (!clk_root_target)
+		return -EINVAL;
+
+	if (p->slice_type == IPG_CLOCK_SLICE)
+		mask = CLK_ROOT_IPG_POST_DIV_MASK;
+	else if (p->slice_type == CORE_CLOCK_SLICE)
+		mask = CLK_ROOT_CORE_POST_DIV_MASK;
+	else
+		mask = CLK_ROOT_POST_DIV_MASK;
+
+	val = readl(clk_root_target);
+	val &= mask;
+	val >>= CLK_ROOT_POST_DIV_SHIFT;
+
+	*post_div = val;
+
+	return 0;
+}
+
+int clock_get_src(enum clk_root_index clock_id, enum clk_root_src *p_clock_src)
+{
+	u32 val;
+	int root_entry;
+	struct clk_root_map *p;
+	void __iomem *clk_root_target;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+
+	clk_root_target = get_clk_root_target(p->slice_type, p->slice_index);
+	if (!clk_root_target)
+		return -EINVAL;
+
+	val = readl(clk_root_target);
+	val &= CLK_ROOT_SRC_MUX_MASK;
+	val >>= CLK_ROOT_SRC_MUX_SHIFT;
+
+	*p_clock_src = p->src_mux[val];
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
new file mode 100644
index 000000000..1a2e43e67
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#define __ASSEMBLY__
+
+FIT
+BOOT_FROM	sd
+LOADER		spl/u-boot-spl-ddr.bin	0x7E1000
+SECOND_LOADER	u-boot.itb		0x40200000 0x60000
+
+DDR_FW lpddr4_pmu_train_1d_imem.bin
+DDR_FW lpddr4_pmu_train_1d_dmem.bin
+DDR_FW lpddr4_pmu_train_2d_imem.bin
+DDR_FW lpddr4_pmu_train_2d_dmem.bin
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg
new file mode 100644
index 000000000..1405c6560
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#define __ASSEMBLY__
+
+FIT
+ROM_VERSION	v2
+BOOT_FROM	sd
+LOADER		spl/u-boot-spl-ddr.bin	0x912000
+SECOND_LOADER	u-boot.itb		0x40200000 0x60000
+
+DDR_FW ddr4_imem_1d.bin
+DDR_FW ddr4_dmem_1d.bin
+DDR_FW ddr4_imem_2d.bin
+DDR_FW ddr4_dmem_2d.bin
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg
new file mode 100644
index 000000000..4c63b31db
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#define __ASSEMBLY__
+
+FIT
+ROM_VERSION	v2
+BOOT_FROM	sd
+LOADER		spl/u-boot-spl-ddr.bin	0x912000
+SECOND_LOADER	u-boot.itb		0x40200000 0x60000
+
+DDR_FW lpddr4_pmu_train_1d_imem.bin
+DDR_FW lpddr4_pmu_train_1d_dmem.bin
+DDR_FW lpddr4_pmu_train_2d_imem.bin
+DDR_FW lpddr4_pmu_train_2d_dmem.bin
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg
new file mode 100644
index 000000000..586a5ff30
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#define __ASSEMBLY__
+
+FIT
+ROM_VERSION	v2
+BOOT_FROM	sd
+LOADER		spl/u-boot-spl-ddr.bin	0x920000
+SECOND_LOADER	u-boot.itb		0x40200000 0x60000
+
+DDR_FW lpddr4_pmu_train_1d_imem.bin
+DDR_FW lpddr4_pmu_train_1d_dmem.bin
+DDR_FW lpddr4_pmu_train_2d_imem.bin
+DDR_FW lpddr4_pmu_train_2d_dmem.bin
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/imximage.cfg b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage.cfg
new file mode 100644
index 000000000..714b24273
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/imximage.cfg
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#define __ASSEMBLY__
+
+FIT
+BOOT_FROM	sd
+SIGNED_HDMI	signed_hdmi_imx8m.bin
+LOADER		spl/u-boot-spl-ddr.bin	0x7E1000
+SECOND_LOADER	u-boot.itb		0x40200000 0x60000
+
+DDR_FW lpddr4_pmu_train_1d_imem.bin
+DDR_FW lpddr4_pmu_train_1d_dmem.bin
+DDR_FW lpddr4_pmu_train_2d_imem.bin
+DDR_FW lpddr4_pmu_train_2d_dmem.bin
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/lowlevel_init.S b/roms/u-boot/arch/arm/mach-imx/imx8m/lowlevel_init.S
new file mode 100644
index 000000000..dd263c406
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/lowlevel_init.S
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ */
+
+#include <config.h>
+
+.align 4
+.global rom_pointer
+rom_pointer:
+	.space 256
+
+/*
+ * Routine: save_boot_params (called after reset from start.S)
+ */
+
+.global save_boot_params
+save_boot_params:
+	/* The firmware provided ATAG/FDT address can be found in r2/x0 */
+	adr	x0, rom_pointer
+	stp	x1, x2, [x0], #16
+	stp	x3, x4, [x0], #16
+	stp	x5, x6, [x0], #16
+	stp	x7, x8, [x0], #16
+	stp	x9, x10, [x0], #16
+	stp	x11, x12, [x0], #16
+	stp	x13, x14, [x0], #16
+	stp	x15, x16, [x0], #16
+	stp	x17, x18, [x0], #16
+	stp	x19, x20, [x0], #16
+	stp	x21, x22, [x0], #16
+	stp	x23, x24, [x0], #16
+	stp	x25, x26, [x0], #16
+	stp	x27, x28, [x0], #16
+	stp	x29, x30, [x0], #16
+	mov	x30, sp
+	str	x30, [x0], #8
+
+	/* Returns */
+	b	save_boot_params_ret
+
+.global restore_boot_params
+restore_boot_params:
+	adr	x0, rom_pointer
+	ldp	x1, x2, [x0], #16
+	ldp	x3, x4, [x0], #16
+	ldp	x5, x6, [x0], #16
+	ldp	x7, x8, [x0], #16
+	ldp	x9, x10, [x0], #16
+	ldp	x11, x12, [x0], #16
+	ldp	x13, x14, [x0], #16
+	ldp	x15, x16, [x0], #16
+	ldp	x17, x18, [x0], #16
+	ldp	x19, x20, [x0], #16
+	ldp	x21, x22, [x0], #16
+	ldp	x23, x24, [x0], #16
+	ldp	x25, x26, [x0], #16
+	ldp	x27, x28, [x0], #16
+	ldp	x29, x30, [x0], #16
+	ldr	x0, [x0]
+	mov	sp, x0
+	ret
+
+.global armv8_el2_to_aarch32
+armv8_el2_to_aarch32:
+	cmp     x0, #0
+	bne     0f
+	mov     x3, x2
+	mov     x2, x1
+	mov     x1, x4
+	ldr x0, =0xc20000fd
+0:
+	smc #0
+	ret
diff --git a/roms/u-boot/arch/arm/mach-imx/imx8m/soc.c b/roms/u-boot/arch/arm/mach-imx/imx8m/soc.c
new file mode 100644
index 000000000..0c44022a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx8m/soc.c
@@ -0,0 +1,1285 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017-2019 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <log.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/hab.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/syscounter.h>
+#include <asm/ptrace.h>
+#include <asm/armv8/mmu.h>
+#include <dm/uclass.h>
+#include <efi_loader.h>
+#include <env.h>
+#include <env_internal.h>
+#include <errno.h>
+#include <fdt_support.h>
+#include <fsl_wdog.h>
+#include <imx_sip.h>
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_IMX_HAB)
+struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
+	.bank = 1,
+	.word = 3,
+};
+#endif
+
+int timer_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR;
+	unsigned long freq = readl(&sctr->cntfid0);
+
+	/* Update with accurate clock frequency */
+	asm volatile("msr cntfrq_el0, %0" : : "r" (freq) : "memory");
+
+	clrsetbits_le32(&sctr->cntcr, SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1,
+			SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG);
+#endif
+
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+
+	return 0;
+}
+
+void enable_tzc380(void)
+{
+	struct iomuxc_gpr_base_regs *gpr =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	/* Enable TZASC and lock setting */
+	setbits_le32(&gpr->gpr[10], GPR_TZASC_EN);
+	setbits_le32(&gpr->gpr[10], GPR_TZASC_EN_LOCK);
+	if (is_imx8mm() || is_imx8mn() || is_imx8mp())
+		setbits_le32(&gpr->gpr[10], BIT(1));
+	/*
+	 * set Region 0 attribute to allow secure and non-secure
+	 * read/write permission. Found some masters like usb dwc3
+	 * controllers can't work with secure memory.
+	 */
+	writel(0xf0000000, TZASC_BASE_ADDR + 0x108);
+}
+
+void set_wdog_reset(struct wdog_regs *wdog)
+{
+	/*
+	 * Output WDOG_B signal to reset external pmic or POR_B decided by
+	 * the board design. Without external reset, the peripherals/DDR/
+	 * PMIC are not reset, that may cause system working abnormal.
+	 * WDZST bit is write-once only bit. Align this bit in kernel,
+	 * otherwise kernel code will have no chance to set this bit.
+	 */
+	setbits_le16(&wdog->wcr, WDOG_WDT_MASK | WDOG_WDZST_MASK);
+}
+
+static struct mm_region imx8m_mem_map[] = {
+	{
+		/* ROM */
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x100000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_OUTER_SHARE
+	}, {
+		/* CAAM */
+		.virt = 0x100000UL,
+		.phys = 0x100000UL,
+		.size = 0x8000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* OCRAM_S */
+		.virt = 0x180000UL,
+		.phys = 0x180000UL,
+		.size = 0x8000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_OUTER_SHARE
+	}, {
+		/* TCM */
+		.virt = 0x7C0000UL,
+		.phys = 0x7C0000UL,
+		.size = 0x80000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* OCRAM */
+		.virt = 0x900000UL,
+		.phys = 0x900000UL,
+		.size = 0x200000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_OUTER_SHARE
+	}, {
+		/* AIPS */
+		.virt = 0xB00000UL,
+		.phys = 0xB00000UL,
+		.size = 0x3f500000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* DRAM1 */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = PHYS_SDRAM_SIZE,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_OUTER_SHARE
+#ifdef PHYS_SDRAM_2_SIZE
+	}, {
+		/* DRAM2 */
+		.virt = 0x100000000UL,
+		.phys = 0x100000000UL,
+		.size = PHYS_SDRAM_2_SIZE,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_OUTER_SHARE
+#endif
+	}, {
+		/* empty entrie to split table entry 5 if needed when TEEs are used */
+		0,
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = imx8m_mem_map;
+
+static unsigned int imx8m_find_dram_entry_in_mem_map(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(imx8m_mem_map); i++)
+		if (imx8m_mem_map[i].phys == CONFIG_SYS_SDRAM_BASE)
+			return i;
+
+	hang();	/* Entry not found, this must never happen. */
+}
+
+void enable_caches(void)
+{
+	/* If OPTEE runs, remove OPTEE memory from MMU table to avoid speculative prefetch */
+	if (rom_pointer[1]) {
+		/*
+		 * TEE are loaded, So the ddr bank structures
+		 * have been modified update mmu table accordingly
+		 */
+		int i = 0;
+		/*
+		 * please make sure that entry initial value matches
+		 * imx8m_mem_map for DRAM1
+		 */
+		int entry = imx8m_find_dram_entry_in_mem_map();
+		u64 attrs = imx8m_mem_map[entry].attrs;
+
+		while (i < CONFIG_NR_DRAM_BANKS &&
+		       entry < ARRAY_SIZE(imx8m_mem_map)) {
+			if (gd->bd->bi_dram[i].start == 0)
+				break;
+			imx8m_mem_map[entry].phys = gd->bd->bi_dram[i].start;
+			imx8m_mem_map[entry].virt = gd->bd->bi_dram[i].start;
+			imx8m_mem_map[entry].size = gd->bd->bi_dram[i].size;
+			imx8m_mem_map[entry].attrs = attrs;
+			debug("Added memory mapping (%d): %llx %llx\n", entry,
+			      imx8m_mem_map[entry].phys, imx8m_mem_map[entry].size);
+			i++; entry++;
+		}
+	}
+
+	icache_enable();
+	dcache_enable();
+}
+
+__weak int board_phys_sdram_size(phys_size_t *size)
+{
+	if (!size)
+		return -EINVAL;
+
+	*size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+int dram_init(void)
+{
+	unsigned int entry = imx8m_find_dram_entry_in_mem_map();
+	phys_size_t sdram_size;
+	int ret;
+
+	ret = board_phys_sdram_size(&sdram_size);
+	if (ret)
+		return ret;
+
+	/* rom_pointer[1] contains the size of TEE occupies */
+	if (rom_pointer[1])
+		gd->ram_size = sdram_size - rom_pointer[1];
+	else
+		gd->ram_size = sdram_size;
+
+	/* also update the SDRAM size in the mem_map used externally */
+	imx8m_mem_map[entry].size = sdram_size;
+
+#ifdef PHYS_SDRAM_2_SIZE
+	gd->ram_size += PHYS_SDRAM_2_SIZE;
+#endif
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	int bank = 0;
+	int ret;
+	phys_size_t sdram_size;
+
+	ret = board_phys_sdram_size(&sdram_size);
+	if (ret)
+		return ret;
+
+	gd->bd->bi_dram[bank].start = PHYS_SDRAM;
+	if (rom_pointer[1]) {
+		phys_addr_t optee_start = (phys_addr_t)rom_pointer[0];
+		phys_size_t optee_size = (size_t)rom_pointer[1];
+
+		gd->bd->bi_dram[bank].size = optee_start - gd->bd->bi_dram[bank].start;
+		if ((optee_start + optee_size) < (PHYS_SDRAM + sdram_size)) {
+			if (++bank >= CONFIG_NR_DRAM_BANKS) {
+				puts("CONFIG_NR_DRAM_BANKS is not enough\n");
+				return -1;
+			}
+
+			gd->bd->bi_dram[bank].start = optee_start + optee_size;
+			gd->bd->bi_dram[bank].size = PHYS_SDRAM +
+				sdram_size - gd->bd->bi_dram[bank].start;
+		}
+	} else {
+		gd->bd->bi_dram[bank].size = sdram_size;
+	}
+
+#ifdef PHYS_SDRAM_2_SIZE
+	if (++bank >= CONFIG_NR_DRAM_BANKS) {
+		puts("CONFIG_NR_DRAM_BANKS is not enough for SDRAM_2\n");
+		return -1;
+	}
+	gd->bd->bi_dram[bank].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[bank].size = PHYS_SDRAM_2_SIZE;
+#endif
+
+	return 0;
+}
+
+phys_size_t get_effective_memsize(void)
+{
+	/* return the first bank as effective memory */
+	if (rom_pointer[1])
+		return ((phys_addr_t)rom_pointer[0] - PHYS_SDRAM);
+
+#ifdef PHYS_SDRAM_2_SIZE
+	return gd->ram_size - PHYS_SDRAM_2_SIZE;
+#else
+	return gd->ram_size;
+#endif
+}
+
+static u32 get_cpu_variant_type(u32 type)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+
+	u32 value = readl(&fuse->tester4);
+
+	if (type == MXC_CPU_IMX8MQ) {
+		if ((value & 0x3) == 0x2)
+			return MXC_CPU_IMX8MD;
+		else if (value & 0x200000)
+			return MXC_CPU_IMX8MQL;
+
+	} else if (type == MXC_CPU_IMX8MM) {
+		switch (value & 0x3) {
+		case 2:
+			if (value & 0x1c0000)
+				return MXC_CPU_IMX8MMDL;
+			else
+				return MXC_CPU_IMX8MMD;
+		case 3:
+			if (value & 0x1c0000)
+				return MXC_CPU_IMX8MMSL;
+			else
+				return MXC_CPU_IMX8MMS;
+		default:
+			if (value & 0x1c0000)
+				return MXC_CPU_IMX8MML;
+			break;
+		}
+	} else if (type == MXC_CPU_IMX8MN) {
+		switch (value & 0x3) {
+		case 2:
+			if (value & 0x1000000) {
+				if (value & 0x10000000)	 /* MIPI DSI */
+					return MXC_CPU_IMX8MNUD;
+				else
+					return MXC_CPU_IMX8MNDL;
+			} else {
+				return MXC_CPU_IMX8MND;
+			}
+		case 3:
+			if (value & 0x1000000) {
+				if (value & 0x10000000)	 /* MIPI DSI */
+					return MXC_CPU_IMX8MNUS;
+				else
+					return MXC_CPU_IMX8MNSL;
+			} else {
+				return MXC_CPU_IMX8MNS;
+			}
+		default:
+			if (value & 0x1000000) {
+				if (value & 0x10000000)	 /* MIPI DSI */
+					return MXC_CPU_IMX8MNUQ;
+				else
+					return MXC_CPU_IMX8MNL;
+			}
+			break;
+		}
+	} else if (type == MXC_CPU_IMX8MP) {
+		u32 value0 = readl(&fuse->tester3);
+		u32 flag = 0;
+
+		if ((value0 & 0xc0000) == 0x80000)
+			return MXC_CPU_IMX8MPD;
+
+			/* vpu disabled */
+		if ((value0 & 0x43000000) == 0x43000000)
+			flag = 1;
+
+		/* npu disabled*/
+		if ((value & 0x8) == 0x8)
+			flag |= (1 << 1);
+
+		/* isp disabled */
+		if ((value & 0x3) == 0x3)
+			flag |= (1 << 2);
+
+		switch (flag) {
+		case 7:
+			return MXC_CPU_IMX8MPL;
+		case 2:
+			return MXC_CPU_IMX8MP6;
+		default:
+			break;
+		}
+
+	}
+
+	return type;
+}
+
+u32 get_cpu_rev(void)
+{
+	struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
+	u32 reg = readl(&ana_pll->digprog);
+	u32 type = (reg >> 16) & 0xff;
+	u32 major_low = (reg >> 8) & 0xff;
+	u32 rom_version;
+
+	reg &= 0xff;
+
+	/* iMX8MP */
+	if (major_low == 0x43) {
+		type = get_cpu_variant_type(MXC_CPU_IMX8MP);
+	} else if (major_low == 0x42) {
+		/* iMX8MN */
+		type = get_cpu_variant_type(MXC_CPU_IMX8MN);
+	} else if (major_low == 0x41) {
+		type = get_cpu_variant_type(MXC_CPU_IMX8MM);
+	} else {
+		if (reg == CHIP_REV_1_0) {
+			/*
+			 * For B0 chip, the DIGPROG is not updated,
+			 * it is still TO1.0. we have to check ROM
+			 * version or OCOTP_READ_FUSE_DATA.
+			 * 0xff0055aa is magic number for B1.
+			 */
+			if (readl((void __iomem *)(OCOTP_BASE_ADDR + 0x40)) == 0xff0055aa) {
+				/*
+				 * B2 uses same DIGPROG and OCOTP_READ_FUSE_DATA value with B1,
+				 * so have to check ROM to distinguish them
+				 */
+				rom_version = readl((void __iomem *)ROM_VERSION_B0);
+				rom_version &= 0xff;
+				if (rom_version == CHIP_REV_2_2)
+					reg = CHIP_REV_2_2;
+				else
+					reg = CHIP_REV_2_1;
+			} else {
+				rom_version =
+					readl((void __iomem *)ROM_VERSION_A0);
+				if (rom_version != CHIP_REV_1_0) {
+					rom_version = readl((void __iomem *)ROM_VERSION_B0);
+					rom_version &= 0xff;
+					if (rom_version == CHIP_REV_2_0)
+						reg = CHIP_REV_2_0;
+				}
+			}
+		}
+
+		type = get_cpu_variant_type(type);
+	}
+
+	return (type << 12) | reg;
+}
+
+static void imx_set_wdog_powerdown(bool enable)
+{
+	struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
+	struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
+	struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
+
+	/* Write to the PDE (Power Down Enable) bit */
+	writew(enable, &wdog1->wmcr);
+	writew(enable, &wdog2->wmcr);
+	writew(enable, &wdog3->wmcr);
+}
+
+int arch_cpu_init_dm(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	if (CONFIG_IS_ENABLED(CLK)) {
+		ret = uclass_get_device_by_name(UCLASS_CLK,
+						"clock-controller@30380000",
+						&dev);
+		if (ret < 0) {
+			printf("Failed to find clock node. Check device tree\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+int arch_cpu_init(void)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	/*
+	 * ROM might disable clock for SCTR,
+	 * enable the clock before timer_init.
+	 */
+	if (IS_ENABLED(CONFIG_SPL_BUILD))
+		clock_enable(CCGR_SCTR, 1);
+	/*
+	 * Init timer at very early state, because sscg pll setting
+	 * will use it
+	 */
+	timer_init();
+
+	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+		clock_init();
+		imx_set_wdog_powerdown(false);
+
+		if (is_imx8md() || is_imx8mmd() || is_imx8mmdl() || is_imx8mms() ||
+		    is_imx8mmsl() || is_imx8mnd() || is_imx8mndl() || is_imx8mns() ||
+		    is_imx8mnsl() || is_imx8mpd() || is_imx8mnud() || is_imx8mnus()) {
+			/* Power down cpu core 1, 2 and 3 for iMX8M Dual core or Single core */
+			struct pgc_reg *pgc_core1 = (struct pgc_reg *)(GPC_BASE_ADDR + 0x840);
+			struct pgc_reg *pgc_core2 = (struct pgc_reg *)(GPC_BASE_ADDR + 0x880);
+			struct pgc_reg *pgc_core3 = (struct pgc_reg *)(GPC_BASE_ADDR + 0x8C0);
+			struct gpc_reg *gpc = (struct gpc_reg *)GPC_BASE_ADDR;
+
+			writel(0x1, &pgc_core2->pgcr);
+			writel(0x1, &pgc_core3->pgcr);
+			if (is_imx8mms() || is_imx8mmsl() || is_imx8mns() || is_imx8mnsl() || is_imx8mnus()) {
+				writel(0x1, &pgc_core1->pgcr);
+				writel(0xE, &gpc->cpu_pgc_dn_trg);
+			} else {
+				writel(0xC, &gpc->cpu_pgc_dn_trg);
+			}
+		}
+	}
+
+	if (is_imx8mq()) {
+		clock_enable(CCGR_OCOTP, 1);
+		if (readl(&ocotp->ctrl) & 0x200)
+			writel(0x200, &ocotp->ctrl_clr);
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
+struct rom_api *g_rom_api = (struct rom_api *)0x980;
+
+enum boot_device get_boot_device(void)
+{
+	volatile gd_t *pgd = gd;
+	int ret;
+	u32 boot;
+	u16 boot_type;
+	u8 boot_instance;
+	enum boot_device boot_dev = SD1_BOOT;
+
+	ret = g_rom_api->query_boot_infor(QUERY_BT_DEV, &boot,
+					  ((uintptr_t)&boot) ^ QUERY_BT_DEV);
+	set_gd(pgd);
+
+	if (ret != ROM_API_OKAY) {
+		puts("ROMAPI: failure at query_boot_info\n");
+		return -1;
+	}
+
+	boot_type = boot >> 16;
+	boot_instance = (boot >> 8) & 0xff;
+
+	switch (boot_type) {
+	case BT_DEV_TYPE_SD:
+		boot_dev = boot_instance + SD1_BOOT;
+		break;
+	case BT_DEV_TYPE_MMC:
+		boot_dev = boot_instance + MMC1_BOOT;
+		break;
+	case BT_DEV_TYPE_NAND:
+		boot_dev = NAND_BOOT;
+		break;
+	case BT_DEV_TYPE_FLEXSPINOR:
+		boot_dev = QSPI_BOOT;
+		break;
+	case BT_DEV_TYPE_USB:
+		boot_dev = USB_BOOT;
+		break;
+	default:
+		break;
+	}
+
+	return boot_dev;
+}
+#endif
+
+bool is_usb_boot(void)
+{
+	return get_boot_device() == USB_BOOT;
+}
+
+#ifdef CONFIG_OF_SYSTEM_SETUP
+bool check_fdt_new_path(void *blob)
+{
+	const char *soc_path = "/soc@0";
+	int nodeoff;
+
+	nodeoff = fdt_path_offset(blob, soc_path);
+	if (nodeoff < 0)
+		return false;
+
+	return true;
+}
+
+static int disable_fdt_nodes(void *blob, const char *const nodes_path[], int size_array)
+{
+	int i = 0;
+	int rc;
+	int nodeoff;
+	const char *status = "disabled";
+
+	for (i = 0; i < size_array; i++) {
+		nodeoff = fdt_path_offset(blob, nodes_path[i]);
+		if (nodeoff < 0)
+			continue; /* Not found, skip it */
+
+		printf("Found %s node\n", nodes_path[i]);
+
+add_status:
+		rc = fdt_setprop(blob, nodeoff, "status", status, strlen(status) + 1);
+		if (rc) {
+			if (rc == -FDT_ERR_NOSPACE) {
+				rc = fdt_increase_size(blob, 512);
+				if (!rc)
+					goto add_status;
+			}
+			printf("Unable to update property %s:%s, err=%s\n",
+			       nodes_path[i], "status", fdt_strerror(rc));
+		} else {
+			printf("Modify %s:%s disabled\n",
+			       nodes_path[i], "status");
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_IMX8MQ
+bool check_dcss_fused(void)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	u32 value = readl(&fuse->tester4);
+
+	if (value & 0x4000000)
+		return true;
+
+	return false;
+}
+
+static int disable_mipi_dsi_nodes(void *blob)
+{
+	static const char * const nodes_path[] = {
+		"/mipi_dsi@30A00000",
+		"/mipi_dsi_bridge@30A00000",
+		"/dsi_phy@30A00300",
+		"/soc@0/bus@30800000/mipi_dsi@30a00000",
+		"/soc@0/bus@30800000/dphy@30a00300",
+		"/soc@0/bus@30800000/mipi-dsi@30a00000",
+	};
+
+	return disable_fdt_nodes(blob, nodes_path, ARRAY_SIZE(nodes_path));
+}
+
+static int disable_dcss_nodes(void *blob)
+{
+	static const char * const nodes_path[] = {
+		"/dcss@0x32e00000",
+		"/dcss@32e00000",
+		"/hdmi@32c00000",
+		"/hdmi_cec@32c33800",
+		"/hdmi_drm@32c00000",
+		"/display-subsystem",
+		"/sound-hdmi",
+		"/sound-hdmi-arc",
+		"/soc@0/bus@32c00000/display-controller@32e00000",
+		"/soc@0/bus@32c00000/hdmi@32c00000",
+	};
+
+	return disable_fdt_nodes(blob, nodes_path, ARRAY_SIZE(nodes_path));
+}
+
+static int check_mipi_dsi_nodes(void *blob)
+{
+	static const char * const lcdif_path[] = {
+		"/lcdif@30320000",
+		"/soc@0/bus@30000000/lcdif@30320000",
+		"/soc@0/bus@30000000/lcd-controller@30320000"
+	};
+	static const char * const mipi_dsi_path[] = {
+		"/mipi_dsi@30A00000",
+		"/soc@0/bus@30800000/mipi_dsi@30a00000"
+	};
+	static const char * const lcdif_ep_path[] = {
+		"/lcdif@30320000/port@0/mipi-dsi-endpoint",
+		"/soc@0/bus@30000000/lcdif@30320000/port@0/endpoint",
+		"/soc@0/bus@30000000/lcd-controller@30320000/port@0/endpoint"
+	};
+	static const char * const mipi_dsi_ep_path[] = {
+		"/mipi_dsi@30A00000/port@1/endpoint",
+		"/soc@0/bus@30800000/mipi_dsi@30a00000/ports/port@0/endpoint",
+		"/soc@0/bus@30800000/mipi-dsi@30a00000/ports/port@0/endpoint@0"
+	};
+
+	int lookup_node;
+	int nodeoff;
+	bool new_path = check_fdt_new_path(blob);
+	int i = new_path ? 1 : 0;
+
+	nodeoff = fdt_path_offset(blob, lcdif_path[i]);
+	if (nodeoff < 0 || !fdtdec_get_is_enabled(blob, nodeoff)) {
+		/*
+		 * If can't find lcdif node or lcdif node is disabled,
+		 * then disable all mipi dsi, since they only can input
+		 * from DCSS
+		 */
+		return disable_mipi_dsi_nodes(blob);
+	}
+
+	nodeoff = fdt_path_offset(blob, mipi_dsi_path[i]);
+	if (nodeoff < 0 || !fdtdec_get_is_enabled(blob, nodeoff))
+		return 0;
+
+	nodeoff = fdt_path_offset(blob, lcdif_ep_path[i]);
+	if (nodeoff < 0) {
+		/*
+		 * If can't find lcdif endpoint, then disable all mipi dsi,
+		 * since they only can input from DCSS
+		 */
+		return disable_mipi_dsi_nodes(blob);
+	}
+
+	lookup_node = fdtdec_lookup_phandle(blob, nodeoff, "remote-endpoint");
+	nodeoff = fdt_path_offset(blob, mipi_dsi_ep_path[i]);
+
+	if (nodeoff > 0 && nodeoff == lookup_node)
+		return 0;
+
+	return disable_mipi_dsi_nodes(blob);
+}
+#endif
+
+int disable_vpu_nodes(void *blob)
+{
+	static const char * const nodes_path_8mq[] = {
+		"/vpu@38300000",
+		"/soc@0/vpu@38300000"
+	};
+
+	static const char * const nodes_path_8mm[] = {
+		"/vpu_g1@38300000",
+		"/vpu_g2@38310000",
+		"/vpu_h1@38320000"
+	};
+
+	static const char * const nodes_path_8mp[] = {
+		"/vpu_g1@38300000",
+		"/vpu_g2@38310000",
+		"/vpu_vc8000e@38320000"
+	};
+
+	if (is_imx8mq())
+		return disable_fdt_nodes(blob, nodes_path_8mq, ARRAY_SIZE(nodes_path_8mq));
+	else if (is_imx8mm())
+		return disable_fdt_nodes(blob, nodes_path_8mm, ARRAY_SIZE(nodes_path_8mm));
+	else if (is_imx8mp())
+		return disable_fdt_nodes(blob, nodes_path_8mp, ARRAY_SIZE(nodes_path_8mp));
+	else
+		return -EPERM;
+}
+
+#ifdef CONFIG_IMX8MN_LOW_DRIVE_MODE
+static int low_drive_gpu_freq(void *blob)
+{
+	static const char *nodes_path_8mn[] = {
+		"/gpu@38000000",
+		"/soc@0/gpu@38000000"
+	};
+
+	int nodeoff, cnt, i;
+	u32 assignedclks[7];
+
+	nodeoff = fdt_path_offset(blob, nodes_path_8mn[0]);
+	if (nodeoff < 0)
+		return nodeoff;
+
+	cnt = fdtdec_get_int_array_count(blob, nodeoff, "assigned-clock-rates", assignedclks, 7);
+	if (cnt < 0)
+		return cnt;
+
+	if (cnt != 7)
+		printf("Warning: %s, assigned-clock-rates count %d\n", nodes_path_8mn[0], cnt);
+
+	assignedclks[cnt - 1] = 200000000;
+	assignedclks[cnt - 2] = 200000000;
+
+	for (i = 0; i < cnt; i++) {
+		debug("<%u>, ", assignedclks[i]);
+		assignedclks[i] = cpu_to_fdt32(assignedclks[i]);
+	}
+	debug("\n");
+
+	return fdt_setprop(blob, nodeoff, "assigned-clock-rates", &assignedclks, sizeof(assignedclks));
+}
+#endif
+
+int disable_gpu_nodes(void *blob)
+{
+	static const char * const nodes_path_8mn[] = {
+		"/gpu@38000000",
+		"/soc@/gpu@38000000"
+	};
+
+	return disable_fdt_nodes(blob, nodes_path_8mn, ARRAY_SIZE(nodes_path_8mn));
+}
+
+int disable_npu_nodes(void *blob)
+{
+	static const char * const nodes_path_8mp[] = {
+		"/vipsi@38500000"
+	};
+
+	return disable_fdt_nodes(blob, nodes_path_8mp, ARRAY_SIZE(nodes_path_8mp));
+}
+
+int disable_isp_nodes(void *blob)
+{
+	static const char * const nodes_path_8mp[] = {
+		"/soc@0/bus@32c00000/camera/isp@32e10000",
+		"/soc@0/bus@32c00000/camera/isp@32e20000"
+	};
+
+	return disable_fdt_nodes(blob, nodes_path_8mp, ARRAY_SIZE(nodes_path_8mp));
+}
+
+int disable_dsp_nodes(void *blob)
+{
+	static const char * const nodes_path_8mp[] = {
+		"/dsp@3b6e8000"
+	};
+
+	return disable_fdt_nodes(blob, nodes_path_8mp, ARRAY_SIZE(nodes_path_8mp));
+}
+
+static void disable_thermal_cpu_nodes(void *blob, u32 disabled_cores)
+{
+	static const char * const thermal_path[] = {
+		"/thermal-zones/cpu-thermal/cooling-maps/map0"
+	};
+
+	int nodeoff, cnt, i, ret, j;
+	u32 cooling_dev[12];
+
+	for (i = 0; i < ARRAY_SIZE(thermal_path); i++) {
+		nodeoff = fdt_path_offset(blob, thermal_path[i]);
+		if (nodeoff < 0)
+			continue; /* Not found, skip it */
+
+		cnt = fdtdec_get_int_array_count(blob, nodeoff, "cooling-device", cooling_dev, 12);
+		if (cnt < 0)
+			continue;
+
+		if (cnt != 12)
+			printf("Warning: %s, cooling-device count %d\n", thermal_path[i], cnt);
+
+		for (j = 0; j < cnt; j++)
+			cooling_dev[j] = cpu_to_fdt32(cooling_dev[j]);
+
+		ret = fdt_setprop(blob, nodeoff, "cooling-device", &cooling_dev,
+				  sizeof(u32) * (12 - disabled_cores * 3));
+		if (ret < 0) {
+			printf("Warning: %s, cooling-device setprop failed %d\n",
+			       thermal_path[i], ret);
+			continue;
+		}
+
+		printf("Update node %s, cooling-device prop\n", thermal_path[i]);
+	}
+}
+
+static void disable_pmu_cpu_nodes(void *blob, u32 disabled_cores)
+{
+	static const char * const pmu_path[] = {
+		"/pmu"
+	};
+
+	int nodeoff, cnt, i, ret, j;
+	u32 irq_affinity[4];
+
+	for (i = 0; i < ARRAY_SIZE(pmu_path); i++) {
+		nodeoff = fdt_path_offset(blob, pmu_path[i]);
+		if (nodeoff < 0)
+			continue; /* Not found, skip it */
+
+		cnt = fdtdec_get_int_array_count(blob, nodeoff, "interrupt-affinity",
+						 irq_affinity, 4);
+		if (cnt < 0)
+			continue;
+
+		if (cnt != 4)
+			printf("Warning: %s, interrupt-affinity count %d\n", pmu_path[i], cnt);
+
+		for (j = 0; j < cnt; j++)
+			irq_affinity[j] = cpu_to_fdt32(irq_affinity[j]);
+
+		ret = fdt_setprop(blob, nodeoff, "interrupt-affinity", &irq_affinity,
+				 sizeof(u32) * (4 - disabled_cores));
+		if (ret < 0) {
+			printf("Warning: %s, interrupt-affinity setprop failed %d\n",
+			       pmu_path[i], ret);
+			continue;
+		}
+
+		printf("Update node %s, interrupt-affinity prop\n", pmu_path[i]);
+	}
+}
+
+static int disable_cpu_nodes(void *blob, u32 disabled_cores)
+{
+	static const char * const nodes_path[] = {
+		"/cpus/cpu@1",
+		"/cpus/cpu@2",
+		"/cpus/cpu@3",
+	};
+	u32 i = 0;
+	int rc;
+	int nodeoff;
+
+	if (disabled_cores > 3)
+		return -EINVAL;
+
+	i = 3 - disabled_cores;
+
+	for (; i < 3; i++) {
+		nodeoff = fdt_path_offset(blob, nodes_path[i]);
+		if (nodeoff < 0)
+			continue; /* Not found, skip it */
+
+		debug("Found %s node\n", nodes_path[i]);
+
+		rc = fdt_del_node(blob, nodeoff);
+		if (rc < 0) {
+			printf("Unable to delete node %s, err=%s\n",
+			       nodes_path[i], fdt_strerror(rc));
+		} else {
+			printf("Delete node %s\n", nodes_path[i]);
+		}
+	}
+
+	disable_thermal_cpu_nodes(blob, disabled_cores);
+	disable_pmu_cpu_nodes(blob, disabled_cores);
+
+	return 0;
+}
+
+int ft_system_setup(void *blob, struct bd_info *bd)
+{
+#ifdef CONFIG_IMX8MQ
+	int i = 0;
+	int rc;
+	int nodeoff;
+
+	if (get_boot_device() == USB_BOOT) {
+		disable_dcss_nodes(blob);
+
+		bool new_path = check_fdt_new_path(blob);
+		int v = new_path ? 1 : 0;
+		static const char * const usb_dwc3_path[] = {
+			"/usb@38100000/dwc3",
+			"/soc@0/usb@38100000"
+		};
+
+		nodeoff = fdt_path_offset(blob, usb_dwc3_path[v]);
+		if (nodeoff >= 0) {
+			const char *speed = "high-speed";
+
+			printf("Found %s node\n", usb_dwc3_path[v]);
+
+usb_modify_speed:
+
+			rc = fdt_setprop(blob, nodeoff, "maximum-speed", speed, strlen(speed) + 1);
+			if (rc) {
+				if (rc == -FDT_ERR_NOSPACE) {
+					rc = fdt_increase_size(blob, 512);
+					if (!rc)
+						goto usb_modify_speed;
+				}
+				printf("Unable to set property %s:%s, err=%s\n",
+				       usb_dwc3_path[v], "maximum-speed", fdt_strerror(rc));
+			} else {
+				printf("Modify %s:%s = %s\n",
+				       usb_dwc3_path[v], "maximum-speed", speed);
+			}
+		} else {
+			printf("Can't found %s node\n", usb_dwc3_path[v]);
+		}
+	}
+
+	/* Disable the CPU idle for A0 chip since the HW does not support it */
+	if (is_soc_rev(CHIP_REV_1_0)) {
+		static const char * const nodes_path[] = {
+			"/cpus/cpu@0",
+			"/cpus/cpu@1",
+			"/cpus/cpu@2",
+			"/cpus/cpu@3",
+		};
+
+		for (i = 0; i < ARRAY_SIZE(nodes_path); i++) {
+			nodeoff = fdt_path_offset(blob, nodes_path[i]);
+			if (nodeoff < 0)
+				continue; /* Not found, skip it */
+
+			debug("Found %s node\n", nodes_path[i]);
+
+			rc = fdt_delprop(blob, nodeoff, "cpu-idle-states");
+			if (rc == -FDT_ERR_NOTFOUND)
+				continue;
+			if (rc) {
+				printf("Unable to update property %s:%s, err=%s\n",
+				       nodes_path[i], "status", fdt_strerror(rc));
+				return rc;
+			}
+
+			debug("Remove %s:%s\n", nodes_path[i],
+			       "cpu-idle-states");
+		}
+	}
+
+	if (is_imx8mql()) {
+		disable_vpu_nodes(blob);
+		if (check_dcss_fused()) {
+			printf("DCSS is fused\n");
+			disable_dcss_nodes(blob);
+			check_mipi_dsi_nodes(blob);
+		}
+	}
+
+	if (is_imx8md())
+		disable_cpu_nodes(blob, 2);
+
+#elif defined(CONFIG_IMX8MM)
+	if (is_imx8mml() || is_imx8mmdl() ||  is_imx8mmsl())
+		disable_vpu_nodes(blob);
+
+	if (is_imx8mmd() || is_imx8mmdl())
+		disable_cpu_nodes(blob, 2);
+	else if (is_imx8mms() || is_imx8mmsl())
+		disable_cpu_nodes(blob, 3);
+
+#elif defined(CONFIG_IMX8MN)
+	if (is_imx8mnl() || is_imx8mndl() ||  is_imx8mnsl())
+		disable_gpu_nodes(blob);
+#ifdef CONFIG_IMX8MN_LOW_DRIVE_MODE
+	else {
+		int ldm_gpu = low_drive_gpu_freq(blob);
+
+		if (ldm_gpu < 0)
+			printf("Update GPU node assigned-clock-rates failed\n");
+		else
+			printf("Update GPU node assigned-clock-rates ok\n");
+	}
+#endif
+
+	if (is_imx8mnd() || is_imx8mndl() || is_imx8mnud())
+		disable_cpu_nodes(blob, 2);
+	else if (is_imx8mns() || is_imx8mnsl() || is_imx8mnus())
+		disable_cpu_nodes(blob, 3);
+
+#elif defined(CONFIG_IMX8MP)
+	if (is_imx8mpl())
+		disable_vpu_nodes(blob);
+
+	if (is_imx8mpl() || is_imx8mp6())
+		disable_npu_nodes(blob);
+
+	if (is_imx8mpl())
+		disable_isp_nodes(blob);
+
+	if (is_imx8mpl() || is_imx8mp6())
+		disable_dsp_nodes(blob);
+
+	if (is_imx8mpd())
+		disable_cpu_nodes(blob, 2);
+#endif
+
+	return 0;
+}
+#endif
+
+#if !CONFIG_IS_ENABLED(SYSRESET)
+void reset_cpu(void)
+{
+	struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+
+	/* Clear WDA to trigger WDOG_B immediately */
+	writew((SET_WCR_WT(1) | WCR_WDT | WCR_WDE | WCR_SRS), &wdog->wcr);
+
+	while (1) {
+		/*
+		 * spin for .5 seconds before reset
+		 */
+	}
+}
+#endif
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+static void acquire_buildinfo(void)
+{
+	u64 atf_commit = 0;
+	struct arm_smccc_res res;
+
+	/* Get ARM Trusted Firmware commit id */
+	arm_smccc_smc(IMX_SIP_BUILDINFO, IMX_SIP_BUILDINFO_GET_COMMITHASH,
+		      0, 0, 0, 0, 0, 0, &res);
+	atf_commit = res.a0;
+	if (atf_commit == 0xffffffff) {
+		debug("ATF does not support build info\n");
+		atf_commit = 0x30; /* Display 0, 0 ascii is 0x30 */
+	}
+
+	printf("\n BuildInfo:\n  - ATF %s\n\n", (char *)&atf_commit);
+}
+
+int arch_misc_init(void)
+{
+	acquire_buildinfo();
+
+	return 0;
+}
+#endif
+
+void imx_tmu_arch_init(void *reg_base)
+{
+	if (is_imx8mm() || is_imx8mn()) {
+		/* Load TCALIV and TASR from fuses */
+		struct ocotp_regs *ocotp =
+			(struct ocotp_regs *)OCOTP_BASE_ADDR;
+		struct fuse_bank *bank = &ocotp->bank[3];
+		struct fuse_bank3_regs *fuse =
+			(struct fuse_bank3_regs *)bank->fuse_regs;
+
+		u32 tca_rt, tca_hr, tca_en;
+		u32 buf_vref, buf_slope;
+
+		tca_rt = fuse->ana0 & 0xFF;
+		tca_hr = (fuse->ana0 & 0xFF00) >> 8;
+		tca_en = (fuse->ana0 & 0x2000000) >> 25;
+
+		buf_vref = (fuse->ana0 & 0x1F00000) >> 20;
+		buf_slope = (fuse->ana0 & 0xF0000) >> 16;
+
+		writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28);
+		writel((tca_en << 31) | (tca_hr << 16) | tca_rt,
+		       (ulong)reg_base + 0x30);
+	}
+#ifdef CONFIG_IMX8MP
+	/* Load TCALIV0/1/m40 and TRIM from fuses */
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[38];
+	struct fuse_bank38_regs *fuse =
+		(struct fuse_bank38_regs *)bank->fuse_regs;
+	struct fuse_bank *bank2 = &ocotp->bank[39];
+	struct fuse_bank39_regs *fuse2 =
+		(struct fuse_bank39_regs *)bank2->fuse_regs;
+	u32 buf_vref, buf_slope, bjt_cur, vlsb, bgr;
+	u32 reg;
+	u32 tca40[2], tca25[2], tca105[2];
+
+	/* For blank sample */
+	if (!fuse->ana_trim2 && !fuse->ana_trim3 &&
+	    !fuse->ana_trim4 && !fuse2->ana_trim5) {
+		/* Use a default 25C binary codes */
+		tca25[0] = 1596;
+		tca25[1] = 1596;
+		writel(tca25[0], (ulong)reg_base + 0x30);
+		writel(tca25[1], (ulong)reg_base + 0x34);
+		return;
+	}
+
+	buf_vref = (fuse->ana_trim2 & 0xc0) >> 6;
+	buf_slope = (fuse->ana_trim2 & 0xF00) >> 8;
+	bjt_cur = (fuse->ana_trim2 & 0xF000) >> 12;
+	bgr = (fuse->ana_trim2 & 0xF0000) >> 16;
+	vlsb = (fuse->ana_trim2 & 0xF00000) >> 20;
+	writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28);
+
+	reg = (bgr << 28) | (bjt_cur << 20) | (vlsb << 12) | (1 << 7);
+	writel(reg, (ulong)reg_base + 0x3c);
+
+	tca40[0] = (fuse->ana_trim3 & 0xFFF0000) >> 16;
+	tca25[0] = (fuse->ana_trim3 & 0xF0000000) >> 28;
+	tca25[0] |= ((fuse->ana_trim4 & 0xFF) << 4);
+	tca105[0] = (fuse->ana_trim4 & 0xFFF00) >> 8;
+	tca40[1] = (fuse->ana_trim4 & 0xFFF00000) >> 20;
+	tca25[1] = fuse2->ana_trim5 & 0xFFF;
+	tca105[1] = (fuse2->ana_trim5 & 0xFFF000) >> 12;
+
+	/* use 25c for 1p calibration */
+	writel(tca25[0] | (tca105[0] << 16), (ulong)reg_base + 0x30);
+	writel(tca25[1] | (tca105[1] << 16), (ulong)reg_base + 0x34);
+	writel(tca40[0] | (tca40[1] << 16), (ulong)reg_base + 0x38);
+#endif
+}
+
+#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN)
+bool serror_need_skip = true;
+
+void do_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+	/*
+	 * If stack is still in ROM reserved OCRAM not switch to SPL,
+	 * it is the ROM SError
+	 */
+	ulong sp;
+
+	asm volatile("mov %0, sp" : "=r"(sp) : );
+
+	if (serror_need_skip && sp < 0x910000 && sp >= 0x900000) {
+		/* Check for ERR050342, imx8mq HDCP enabled parts */
+		if (is_imx8mq() && !(readl(OCOTP_BASE_ADDR + 0x450) & 0x08000000)) {
+			serror_need_skip = false;
+			return; /* Do nothing skip the SError in ROM */
+		}
+
+		/* Check for ERR050350, field return mode for imx8mq, mm and mn */
+		if (readl(OCOTP_BASE_ADDR + 0x630) & 0x1) {
+			serror_need_skip = false;
+			return; /* Do nothing skip the SError in ROM */
+		}
+	}
+
+	efi_restore_gd();
+	printf("\"Error\" handler, esr 0x%08x\n", esr);
+	show_regs(pt_regs);
+	panic("Resetting CPU ...\n");
+}
+#endif
+#endif
+
+#if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	enum boot_device dev = get_boot_device();
+	enum env_location env_loc = ENVL_UNKNOWN;
+
+	if (prio)
+		return env_loc;
+
+	switch (dev) {
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+	case QSPI_BOOT:
+		env_loc = ENVL_SPI_FLASH;
+		break;
+#endif
+#ifdef CONFIG_ENV_IS_IN_NAND
+	case NAND_BOOT:
+		env_loc = ENVL_NAND;
+		break;
+#endif
+#ifdef CONFIG_ENV_IS_IN_MMC
+	case SD1_BOOT:
+	case SD2_BOOT:
+	case SD3_BOOT:
+	case MMC1_BOOT:
+	case MMC2_BOOT:
+	case MMC3_BOOT:
+		env_loc =  ENVL_MMC;
+		break;
+#endif
+	default:
+#if defined(CONFIG_ENV_IS_NOWHERE)
+		env_loc = ENVL_NOWHERE;
+#endif
+		break;
+	}
+
+	return env_loc;
+}
+
+#ifndef ENV_IS_EMBEDDED
+long long env_get_offset(long long defautl_offset)
+{
+	enum boot_device dev = get_boot_device();
+
+	switch (dev) {
+	case NAND_BOOT:
+		return (60 << 20);  /* 60MB offset for NAND */
+	default:
+		break;
+	}
+
+	return defautl_offset;
+}
+#endif
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/imx_bootaux.c b/roms/u-boot/arch/arm/mach-imx/imx_bootaux.c
new file mode 100644
index 000000000..30fb45d48
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imx_bootaux.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/mach-imx/sys_proto.h>
+#include <command.h>
+#include <elf.h>
+#include <imx_sip.h>
+#include <linux/arm-smccc.h>
+#include <linux/compiler.h>
+#include <cpu_func.h>
+
+#ifndef CONFIG_IMX8M
+const __weak struct rproc_att hostmap[] = { };
+
+static const struct rproc_att *get_host_mapping(unsigned long auxcore)
+{
+	const struct rproc_att *mmap = hostmap;
+
+	while (mmap && mmap->size) {
+		if (mmap->da <= auxcore &&
+		    mmap->da + mmap->size > auxcore)
+			return mmap;
+		mmap++;
+	}
+
+	return NULL;
+}
+
+/*
+ * A very simple elf loader for the auxilary core, assumes the image
+ * is valid, returns the entry point address.
+ * Translates load addresses in the elf file to the U-Boot address space.
+ */
+static unsigned long load_elf_image_m_core_phdr(unsigned long addr)
+{
+	Elf32_Ehdr *ehdr; /* ELF header structure pointer */
+	Elf32_Phdr *phdr; /* Program header structure pointer */
+	int i;
+
+	ehdr = (Elf32_Ehdr *)addr;
+	phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff);
+
+	/* Load each program header */
+	for (i = 0; i < ehdr->e_phnum; ++i, ++phdr) {
+		const struct rproc_att *mmap = get_host_mapping(phdr->p_paddr);
+		void *dst, *src;
+
+		if (phdr->p_type != PT_LOAD)
+			continue;
+
+		if (!mmap) {
+			printf("Invalid aux core address: %08x",
+			       phdr->p_paddr);
+			return 0;
+		}
+
+		dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa;
+		src = (void *)addr + phdr->p_offset;
+
+		debug("Loading phdr %i to 0x%p (%i bytes)\n",
+		      i, dst, phdr->p_filesz);
+
+		if (phdr->p_filesz)
+			memcpy(dst, src, phdr->p_filesz);
+		if (phdr->p_filesz != phdr->p_memsz)
+			memset(dst + phdr->p_filesz, 0x00,
+			       phdr->p_memsz - phdr->p_filesz);
+		flush_cache((unsigned long)dst &
+			    ~(CONFIG_SYS_CACHELINE_SIZE - 1),
+			    ALIGN(phdr->p_filesz, CONFIG_SYS_CACHELINE_SIZE));
+	}
+
+	return ehdr->e_entry;
+}
+#endif
+
+int arch_auxiliary_core_up(u32 core_id, ulong addr)
+{
+	ulong stack, pc;
+
+	if (!addr)
+		return -EINVAL;
+
+#ifdef CONFIG_IMX8M
+	stack = *(u32 *)addr;
+	pc = *(u32 *)(addr + 4);
+#else
+	/*
+	 * handling ELF64 binaries
+	 * isn't supported yet.
+	 */
+	if (valid_elf_image(addr)) {
+		stack = 0x0;
+		pc = load_elf_image_m_core_phdr(addr);
+		if (!pc)
+			return CMD_RET_FAILURE;
+
+	} else {
+		/*
+		 * Assume binary file with vector table at the beginning.
+		 * Cortex-M4 vector tables start with the stack pointer (SP)
+		 * and reset vector (initial PC).
+		 */
+		stack = *(u32 *)addr;
+		pc = *(u32 *)(addr + 4);
+	}
+#endif
+	printf("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n",
+	       stack, pc);
+
+	/* Set the stack and pc to M4 bootROM */
+	writel(stack, M4_BOOTROM_BASE_ADDR);
+	writel(pc, M4_BOOTROM_BASE_ADDR + 4);
+
+	flush_dcache_all();
+
+	/* Enable M4 */
+#ifdef CONFIG_IMX8M
+	arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0,
+		      0, 0, 0, 0, NULL);
+#else
+	clrsetbits_le32(SRC_BASE_ADDR + SRC_M4_REG_OFFSET,
+			SRC_M4C_NON_SCLR_RST_MASK, SRC_M4_ENABLE_MASK);
+#endif
+
+	return 0;
+}
+
+int arch_auxiliary_core_check_up(u32 core_id)
+{
+#ifdef CONFIG_IMX8M
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0,
+		      0, 0, 0, 0, &res);
+
+	return res.a0;
+#else
+	unsigned int val;
+
+	val = readl(SRC_BASE_ADDR + SRC_M4_REG_OFFSET);
+
+	if (val & SRC_M4C_NON_SCLR_RST_MASK)
+		return 0;  /* assert in reset */
+
+	return 1;
+#endif
+}
+
+/*
+ * To i.MX6SX and i.MX7D, the image supported by bootaux needs
+ * the reset vector at the head for the image, with SP and PC
+ * as the first two words.
+ *
+ * Per the cortex-M reference manual, the reset vector of M4 needs
+ * to exist at 0x0 (TCMUL). The PC and SP are the first two addresses
+ * of that vector.  So to boot M4, the A core must build the M4's reset
+ * vector with getting the PC and SP from image and filling them to
+ * TCMUL. When M4 is kicked, it will load the PC and SP by itself.
+ * The TCMUL is mapped to (M4_BOOTROM_BASE_ADDR) at A core side for
+ * accessing the M4 TCMUL.
+ */
+static int do_bootaux(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	ulong addr;
+	int ret, up;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	up = arch_auxiliary_core_check_up(0);
+	if (up) {
+		printf("## Auxiliary core is already up\n");
+		return CMD_RET_SUCCESS;
+	}
+
+	addr = simple_strtoul(argv[1], NULL, 16);
+
+	if (!addr)
+		return CMD_RET_FAILURE;
+
+	ret = arch_auxiliary_core_up(0, addr);
+	if (ret)
+		return CMD_RET_FAILURE;
+
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	bootaux, CONFIG_SYS_MAXARGS, 1,	do_bootaux,
+	"Start auxiliary core",
+	""
+);
diff --git a/roms/u-boot/arch/arm/mach-imx/imxrt/Kconfig b/roms/u-boot/arch/arm/mach-imx/imxrt/Kconfig
new file mode 100644
index 000000000..d275fdf72
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imxrt/Kconfig
@@ -0,0 +1,34 @@
+if ARCH_IMXRT
+
+config IMXRT
+	bool
+
+config IMXRT1020
+	bool
+	select IMXRT
+
+config IMXRT1050
+	bool
+	select IMXRT
+
+config SYS_SOC
+	default "imxrt"
+
+choice
+	prompt "NXP i.MXRT board select"
+	optional
+
+config TARGET_IMXRT1020_EVK
+	bool "Support imxrt1020 EVK board"
+	select IMXRT1020
+
+config TARGET_IMXRT1050_EVK
+	bool "Support imxrt1050 EVK board"
+	select IMXRT1050
+
+endchoice
+
+source "board/freescale/imxrt1020-evk/Kconfig"
+source "board/freescale/imxrt1050-evk/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/imxrt/Makefile b/roms/u-boot/arch/arm/mach-imx/imxrt/Makefile
new file mode 100644
index 000000000..9621a8335
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imxrt/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2019
+# Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+#
+
+obj-y	:= soc.o
diff --git a/roms/u-boot/arch/arm/mach-imx/imxrt/soc.c b/roms/u-boot/arch/arm/mach-imx/imxrt/soc.c
new file mode 100644
index 000000000..ba015992e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/imxrt/soc.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/armv7_mpu.h>
+#include <asm/mach-imx/sys_proto.h>
+#include <linux/bitops.h>
+
+int arch_cpu_init(void)
+{
+	int i;
+
+	struct mpu_region_config imxrt_region_config[] = {
+		{ 0x00000000, REGION_0, XN_DIS, PRIV_RW_USR_RW,
+		  STRONG_ORDER, REGION_4GB },
+		{ PHYS_SDRAM, REGION_1, XN_DIS, PRIV_RW_USR_RW,
+		  O_I_WB_RD_WR_ALLOC, (ffs(PHYS_SDRAM_SIZE) - 2) },
+		{ DMAMEM_BASE,
+		  REGION_2, XN_DIS, PRIV_RW_USR_RW,
+		  STRONG_ORDER, (ffs(DMAMEM_SZ_ALL) - 2) },
+	};
+
+	/*
+	 * Configure the memory protection unit (MPU) to allow full access to
+	 * the whole 4GB address space.
+	 */
+	disable_mpu();
+	for (i = 0; i < ARRAY_SIZE(imxrt_region_config); i++)
+		mpu_config(&imxrt_region_config[i]);
+	enable_mpu();
+
+	return 0;
+}
+
+u32 get_cpu_rev(void)
+{
+#if defined(CONFIG_IMXRT1020)
+	return MXC_CPU_IMXRT1020 << 12;
+#elif defined(CONFIG_IMXRT1050)
+	return MXC_CPU_IMXRT1050 << 12;
+#else
+#error This IMXRT SoC is not supported
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/init.c b/roms/u-boot/arch/arm/mach-imx/init.c
new file mode 100644
index 000000000..ce3eb4b0b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/init.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ */
+
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/arch/crm_regs.h>
+
+void init_aips(void)
+{
+	struct aipstz_regs *aips1, *aips2, *aips3;
+
+	aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR;
+	aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR;
+	aips3 = (struct aipstz_regs *)AIPS3_BASE_ADDR;
+
+	/*
+	 * Set all MPROTx to be non-bufferable, trusted for R/W,
+	 * not forced to user-mode.
+	 */
+	writel(0x77777777, &aips1->mprot0);
+	writel(0x77777777, &aips1->mprot1);
+	writel(0x77777777, &aips2->mprot0);
+	writel(0x77777777, &aips2->mprot1);
+
+	/*
+	 * Set all OPACRx to be non-bufferable, not require
+	 * supervisor privilege level for access,allow for
+	 * write access and untrusted master access.
+	 */
+	writel(0x00000000, &aips1->opacr0);
+	writel(0x00000000, &aips1->opacr1);
+	writel(0x00000000, &aips1->opacr2);
+	writel(0x00000000, &aips1->opacr3);
+	writel(0x00000000, &aips1->opacr4);
+	writel(0x00000000, &aips2->opacr0);
+	writel(0x00000000, &aips2->opacr1);
+	writel(0x00000000, &aips2->opacr2);
+	writel(0x00000000, &aips2->opacr3);
+	writel(0x00000000, &aips2->opacr4);
+
+	if (is_mx6ull() || is_mx6sx() || is_mx7()) {
+		/*
+		 * Set all MPROTx to be non-bufferable, trusted for R/W,
+		 * not forced to user-mode.
+		 */
+		writel(0x77777777, &aips3->mprot0);
+		writel(0x77777777, &aips3->mprot1);
+
+		/*
+		 * Set all OPACRx to be non-bufferable, not require
+		 * supervisor privilege level for access,allow for
+		 * write access and untrusted master access.
+		 */
+		writel(0x00000000, &aips3->opacr0);
+		writel(0x00000000, &aips3->opacr1);
+		writel(0x00000000, &aips3->opacr2);
+		writel(0x00000000, &aips3->opacr3);
+		writel(0x00000000, &aips3->opacr4);
+	}
+}
+
+void imx_wdog_disable_powerdown(void)
+{
+	struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
+	struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
+	struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
+#ifdef CONFIG_MX7D
+	struct wdog_regs *wdog4 = (struct wdog_regs *)WDOG4_BASE_ADDR;
+#endif
+
+	/* Write to the PDE (Power Down Enable) bit */
+	writew(0, &wdog1->wmcr);
+	writew(0, &wdog2->wmcr);
+
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx7())
+		writew(0, &wdog3->wmcr);
+#ifdef CONFIG_MX7D
+	writew(0, &wdog4->wmcr);
+#endif
+}
+
+#define SRC_SCR_WARM_RESET_ENABLE	0
+
+void init_src(void)
+{
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+	u32 val;
+
+	/*
+	 * force warm reset sources to generate cold reset
+	 * for a more reliable restart
+	 */
+	val = readl(&src_regs->scr);
+	val &= ~(1 << SRC_SCR_WARM_RESET_ENABLE);
+	writel(val, &src_regs->scr);
+}
+
+#ifdef CONFIG_CMD_BMODE
+void boot_mode_apply(unsigned cfg_val)
+{
+#ifdef CONFIG_MX6
+	const u32 persist_sec = IMX6_SRC_GPR10_PERSIST_SECONDARY_BOOT;
+	const u32 bmode = IMX6_SRC_GPR10_BMODE;
+#elif CONFIG_MX7
+	const u32 persist_sec = IMX7_SRC_GPR10_PERSIST_SECONDARY_BOOT;
+	const u32 bmode = IMX7_SRC_GPR10_BMODE;
+#endif
+	struct src *psrc = (struct src *)SRC_BASE_ADDR;
+	unsigned reg;
+
+	if (cfg_val == MAKE_CFGVAL_PRIMARY_BOOT)
+		clrbits_le32(&psrc->gpr10, persist_sec);
+	else if (cfg_val == MAKE_CFGVAL_SECONDARY_BOOT)
+		setbits_le32(&psrc->gpr10, persist_sec);
+	else {
+		writel(cfg_val, &psrc->gpr9);
+		reg = readl(&psrc->gpr10);
+		if (cfg_val)
+			reg |= bmode;
+		else
+			reg &= ~bmode;
+		writel(reg, &psrc->gpr10);
+	}
+}
+#endif
+
+#if defined(CONFIG_MX6)
+u32 imx6_src_get_boot_mode(void)
+{
+	if (readl(&src_base->gpr10) & IMX6_SRC_GPR10_BMODE)
+		return readl(&src_base->gpr9);
+	else
+		return readl(&src_base->sbmr1);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/iomux-v3.c b/roms/u-boot/arch/arm/mach-imx/iomux-v3.c
new file mode 100644
index 000000000..18131a20f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/iomux-v3.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Based on the iomux-v3.c from Linux kernel:
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                       <armlinux@phytec.de>
+ *
+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/sys_proto.h>
+
+static void *base = (void *)IOMUXC_BASE_ADDR;
+
+/*
+ * configures a single pad in the iomuxer
+ */
+void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
+{
+	u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
+	u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+	u32 sel_input_ofs =
+		(pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
+	u32 sel_input =
+		(pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
+	u32 pad_ctrl_ofs =
+		(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
+	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
+
+#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
+	/* Check whether LVE bit needs to be set */
+	if (pad_ctrl & PAD_CTL_LVE) {
+		pad_ctrl &= ~PAD_CTL_LVE;
+		pad_ctrl |= PAD_CTL_LVE_BIT;
+	}
+#endif
+
+#ifdef CONFIG_IOMUX_LPSR
+	u32 lpsr = (pad & MUX_MODE_LPSR) >> MUX_MODE_SHIFT;
+
+#ifdef CONFIG_MX7
+	if (lpsr == IOMUX_CONFIG_LPSR) {
+		base = (void *)IOMUXC_LPSR_BASE_ADDR;
+		mux_mode &= ~IOMUX_CONFIG_LPSR;
+		/* set daisy chain sel_input */
+		if (sel_input_ofs)
+			sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS;
+	}
+#else
+	if (is_mx6ull() || is_mx6sll()) {
+		if (lpsr == IOMUX_CONFIG_LPSR) {
+			base = (void *)IOMUXC_SNVS_BASE_ADDR;
+			mux_mode &= ~IOMUX_CONFIG_LPSR;
+		}
+	}
+#endif
+#endif
+
+	if (is_mx7() || is_mx6ull() || is_mx6sll() || mux_ctrl_ofs)
+		__raw_writel(mux_mode, base + mux_ctrl_ofs);
+
+	if (sel_input_ofs)
+		__raw_writel(sel_input, base + sel_input_ofs);
+
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+	if (!(pad_ctrl & NO_PAD_CTRL))
+		__raw_writel((mux_mode << PAD_MUX_MODE_SHIFT) | pad_ctrl,
+			base + pad_ctrl_ofs);
+#else
+	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
+		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+#if defined(CONFIG_MX6SLL)
+	else if ((pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
+		clrbits_le32(base + pad_ctrl_ofs, PAD_CTL_IPD_BIT);
+#endif
+#endif
+
+#ifdef CONFIG_IOMUX_LPSR
+	if (lpsr == IOMUX_CONFIG_LPSR)
+		base = (void *)IOMUXC_BASE_ADDR;
+#endif
+
+}
+
+/* configures a list of pads within declared with IOMUX_PADS macro */
+void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
+				      unsigned count)
+{
+	iomux_v3_cfg_t const *p = pad_list;
+	int stride;
+	int i;
+
+#if defined(CONFIG_MX6QDL)
+	stride = 2;
+	if (!is_mx6dq() && !is_mx6dqp())
+		p += 1;
+#else
+	stride = 1;
+#endif
+	for (i = 0; i < count; i++) {
+		imx_iomux_v3_setup_pad(*p);
+		p += stride;
+	}
+}
+
+void imx_iomux_set_gpr_register(int group, int start_bit,
+					int num_bits, int value)
+{
+	int i = 0;
+	u32 reg;
+	reg = readl(base + group * 4);
+	while (num_bits) {
+		reg &= ~(1<<(start_bit + i));
+		i++;
+		num_bits--;
+	}
+	reg |= (value << start_bit);
+	writel(reg, base + group * 4);
+}
+
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+				unsigned int direction)
+{
+	u32 reg;
+	/*
+	 * Only on Vybrid the input/output buffer enable flags
+	 * are part of the shared mux/conf register.
+	 */
+	reg = readl(base + (gpio << 2));
+
+	if (direction)
+		reg |= 0x2;
+	else
+		reg &= ~0x2;
+
+	writel(reg, base + (gpio << 2));
+}
+
+void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state)
+{
+	*gpio_state = readl(base + (gpio << 2)) &
+		((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/lowlevel.S b/roms/u-boot/arch/arm/mach-imx/lowlevel.S
new file mode 100644
index 000000000..158fdb7d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/lowlevel.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	mrs	x0, CurrentEL
+	cmp	x0, #8
+	b.eq	1f
+	ret
+1:
+	msr daifclr, #4
+
+	/* set HCR_EL2.AMO to catch SERROR */
+	mrs	x0, hcr_el2
+	orr	x0, x0, #0x20
+	msr	hcr_el2, x0
+	isb
+	ret
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-imx/mac.c b/roms/u-boot/arch/arm/mach-imx/mac.c
new file mode 100644
index 000000000..3b1496b20
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mac.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <errno.h>
+
+struct imx_mac_fuse {
+	u32 mac_addr0;
+	u32 rsvd0[3];
+	u32 mac_addr1;
+	u32 rsvd1[3];
+	u32 mac_addr2;
+	u32 rsvd2[7];
+};
+
+#define MAC_FUSE_MX6_OFFSET	0x620
+#define MAC_FUSE_MX7_OFFSET	0x640
+
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	struct imx_mac_fuse *fuse;
+	u32 offset;
+	bool has_second_mac;
+
+	offset = is_mx6() ? MAC_FUSE_MX6_OFFSET : MAC_FUSE_MX7_OFFSET;
+	fuse = (struct imx_mac_fuse *)(ulong)(OCOTP_BASE_ADDR + offset);
+	has_second_mac = is_mx7() || is_mx6sx() || is_mx6ul() || is_mx6ull();
+
+	if (has_second_mac && dev_id == 1) {
+		u32 value = readl(&fuse->mac_addr2);
+
+		mac[0] = value >> 24;
+		mac[1] = value >> 16;
+		mac[2] = value >> 8;
+		mac[3] = value;
+
+		value = readl(&fuse->mac_addr1);
+		mac[4] = value >> 24;
+		mac[5] = value >> 16;
+
+	} else {
+		u32 value = readl(&fuse->mac_addr1);
+
+		mac[0] = value >> 8;
+		mac[1] = value;
+
+		value = readl(&fuse->mac_addr0);
+		mac[2] = value >> 24;
+		mac[3] = value >> 16;
+		mac[4] = value >> 8;
+		mac[5] = value;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/misc.c b/roms/u-boot/arch/arm/mach-imx/misc.c
new file mode 100644
index 000000000..d82efa7f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/misc.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <lmb.h>
+#include <log.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/mach-imx/regs-common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* 1 second delay should be plenty of time for block reset. */
+#define	RESET_MAX_TIMEOUT	1000000
+
+#define	MXS_BLOCK_SFTRST	(1 << 31)
+#define	MXS_BLOCK_CLKGATE	(1 << 30)
+
+int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned
+								int timeout)
+{
+	while (--timeout) {
+		if ((readl(&reg->reg) & mask) == mask)
+			break;
+		udelay(1);
+	}
+
+	return !timeout;
+}
+
+int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned
+								int timeout)
+{
+	while (--timeout) {
+		if ((readl(&reg->reg) & mask) == 0)
+			break;
+		udelay(1);
+	}
+
+	return !timeout;
+}
+
+int mxs_reset_block(struct mxs_register_32 *reg)
+{
+	/* Clear SFTRST */
+	writel(MXS_BLOCK_SFTRST, &reg->reg_clr);
+
+	if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+		return 1;
+
+	/* Clear CLKGATE */
+	writel(MXS_BLOCK_CLKGATE, &reg->reg_clr);
+
+	/* Set SFTRST */
+	writel(MXS_BLOCK_SFTRST, &reg->reg_set);
+
+	/* Wait for CLKGATE being set */
+	if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+		return 1;
+
+	/* Clear SFTRST */
+	writel(MXS_BLOCK_SFTRST, &reg->reg_clr);
+
+	if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+		return 1;
+
+	/* Clear CLKGATE */
+	writel(MXS_BLOCK_CLKGATE, &reg->reg_clr);
+
+	if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+		return 1;
+
+	return 0;
+}
+
+static ulong get_sp(void)
+{
+	ulong ret;
+
+	asm("mov %0, sp" : "=r"(ret) : );
+	return ret;
+}
+
+void board_lmb_reserve(struct lmb *lmb)
+{
+	ulong sp, bank_end;
+	int bank;
+
+	sp = get_sp();
+	debug("## Current stack ends at 0x%08lx ", sp);
+
+	/* adjust sp by 16K to be safe */
+	sp -= 4096 << 2;
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		if (sp < gd->bd->bi_dram[bank].start)
+			continue;
+		bank_end = gd->bd->bi_dram[bank].start +
+			gd->bd->bi_dram[bank].size;
+		if (sp >= bank_end)
+			continue;
+		lmb_reserve(lmb, sp, bank_end - sp);
+		break;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mkimage_fit_atf.sh b/roms/u-boot/arch/arm/mach-imx/mkimage_fit_atf.sh
new file mode 100755
index 000000000..2a1796879
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mkimage_fit_atf.sh
@@ -0,0 +1,143 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# script to generate FIT image source for i.MX8MQ boards with
+# ARM Trusted Firmware and multiple device trees (given on the command line)
+#
+# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+
+[ -z "$BL31" ] && BL31="bl31.bin"
+[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0xfe000000"
+[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0x00910000"
+[ -z "$BL33_LOAD_ADDR" ] && BL33_LOAD_ADDR="0x40200000"
+
+if [ ! -f $BL31 ]; then
+	echo "ERROR: BL31 file $BL31 NOT found" >&2
+	exit 0
+else
+	echo "$BL31 size: " >&2
+	stat -c %s $BL31 >&2
+fi
+
+BL32="tee.bin"
+
+if [ ! -f $BL32 ]; then
+	BL32=/dev/null
+else
+	echo "Building with TEE support, make sure your $BL31 is compiled with spd. If you do not want tee, please delete $BL31" >&2
+	echo "$BL32 size: " >&2
+	stat -c %s $BL32 >&2
+fi
+
+BL33="u-boot-nodtb.bin"
+
+if [ ! -f $BL33 ]; then
+	echo "ERROR: $BL33 file NOT found" >&2
+	exit 0
+else
+	echo "u-boot-nodtb.bin size: " >&2
+	stat -c %s u-boot-nodtb.bin >&2
+fi
+
+for dtname in $*
+do
+	echo "$dtname size: " >&2
+	stat -c %s $dtname >&2
+done
+
+
+cat << __HEADER_EOF
+/dts-v1/;
+
+/ {
+	description = "Configuration to load ATF before U-Boot";
+
+	images {
+		uboot@1 {
+			description = "U-Boot (64-bit)";
+			os = "u-boot";
+			data = /incbin/("$BL33");
+			type = "standalone";
+			arch = "arm64";
+			compression = "none";
+			load = <$BL33_LOAD_ADDR>;
+		};
+__HEADER_EOF
+
+cnt=1
+for dtname in $*
+do
+	cat << __FDT_IMAGE_EOF
+		fdt@$cnt {
+			description = "$(basename $dtname .dtb)";
+			data = /incbin/("$dtname");
+			type = "flat_dt";
+			compression = "none";
+		};
+__FDT_IMAGE_EOF
+cnt=$((cnt+1))
+done
+
+cat << __HEADER_EOF
+		atf@1 {
+			description = "ARM Trusted Firmware";
+			os = "arm-trusted-firmware";
+			data = /incbin/("$BL31");
+			type = "firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <$ATF_LOAD_ADDR>;
+			entry = <$ATF_LOAD_ADDR>;
+		};
+__HEADER_EOF
+
+if [ -f $BL32 ]; then
+cat << __HEADER_EOF
+		tee@1 {
+			description = "TEE firmware";
+			data = /incbin/("$BL32");
+			type = "firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <$TEE_LOAD_ADDR>;
+			entry = <$TEE_LOAD_ADDR>;
+		};
+__HEADER_EOF
+fi
+
+cat << __CONF_HEADER_EOF
+	};
+	configurations {
+		default = "config@1";
+
+__CONF_HEADER_EOF
+
+cnt=1
+for dtname in $*
+do
+if [ -f $BL32 ]; then
+cat << __CONF_SECTION_EOF
+		config@$cnt {
+			description = "$(basename $dtname .dtb)";
+			firmware = "uboot@1";
+			loadables = "atf@1", "tee@1";
+			fdt = "fdt@$cnt";
+		};
+__CONF_SECTION_EOF
+else
+cat << __CONF_SECTION1_EOF
+		config@$cnt {
+			description = "$(basename $dtname .dtb)";
+			firmware = "uboot@1";
+			loadables = "atf@1";
+			fdt = "fdt@$cnt";
+		};
+__CONF_SECTION1_EOF
+fi
+cnt=$((cnt+1))
+done
+
+cat << __ITS_EOF
+	};
+};
+__ITS_EOF
diff --git a/roms/u-boot/arch/arm/mach-imx/mmc_env.c b/roms/u-boot/arch/arm/mach-imx/mmc_env.c
new file mode 100644
index 000000000..9c822f721
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mmc_env.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 NXP
+ */
+
+#include <common.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/mach-imx/boot_mode.h>
+
+__weak int board_mmc_get_env_dev(int devno)
+{
+	return CONFIG_SYS_MMC_ENV_DEV;
+}
+
+int mmc_get_env_dev(void)
+{
+	struct bootrom_sw_info **p =
+		(struct bootrom_sw_info **)(ulong)ROM_SW_INFO_ADDR;
+	int devno = (*p)->boot_dev_instance;
+	u8 boot_type = (*p)->boot_dev_type;
+
+	/* If not boot from sd/mmc, use default value */
+	if ((boot_type != BOOT_TYPE_SD) && (boot_type != BOOT_TYPE_MMC))
+		return CONFIG_SYS_MMC_ENV_DEV;
+
+	return board_mmc_get_env_dev(devno);
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mmdc_size.c b/roms/u-boot/arch/arm/mach-imx/mmdc_size.c
new file mode 100644
index 000000000..1a094726a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mmdc_size.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_MX53)
+#define MEMCTL_BASE	ESDCTL_BASE_ADDR
+#elif defined(CONFIG_MX6)
+#define MEMCTL_BASE	MMDC_P0_BASE_ADDR
+#elif defined(CONFIG_MX7ULP)
+#define MEMCTL_BASE	MMDC0_RBASE
+#endif
+static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9};
+static const unsigned char bank_lookup[] = {3, 2};
+
+/* these MMDC registers are common to the IMX53 and IMX6 */
+struct esd_mmdc_regs {
+	u32 ctl;
+	u32 pdc;
+	u32 otc;
+	u32 cfg0;
+	u32 cfg1;
+	u32 cfg2;
+	u32 misc;
+};
+
+#define ESD_MMDC_CTL_GET_ROW(mdctl)	((ctl >> 24) & 7)
+#define ESD_MMDC_CTL_GET_COLUMN(mdctl)	((ctl >> 20) & 7)
+#define ESD_MMDC_CTL_GET_WIDTH(mdctl)	((ctl >> 16) & 3)
+#define ESD_MMDC_CTL_GET_CS1(mdctl)	((ctl >> 30) & 1)
+#define ESD_MMDC_MISC_GET_BANK(mdmisc)	((misc >> 5) & 1)
+
+/*
+ * imx_ddr_size - return size in bytes of DRAM according MMDC config
+ * The MMDC MDCTL register holds the number of bits for row, col, and data
+ * width and the MMDC MDMISC register holds the number of banks. Combine
+ * all these bits to determine the meme size the MMDC has been configured for
+ */
+unsigned int imx_ddr_size(void)
+{
+	struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE;
+	unsigned int ctl = readl(&mem->ctl);
+	unsigned int misc = readl(&mem->misc);
+	int bits = 11 + 0 + 0 + 1;      /* row + col + bank + width */
+
+	bits += ESD_MMDC_CTL_GET_ROW(ctl);
+	bits += col_lookup[ESD_MMDC_CTL_GET_COLUMN(ctl)];
+	bits += bank_lookup[ESD_MMDC_MISC_GET_BANK(misc)];
+	bits += ESD_MMDC_CTL_GET_WIDTH(ctl);
+	bits += ESD_MMDC_CTL_GET_CS1(ctl);
+
+	/* The MX6 can do only 3840 MiB of DRAM */
+	if (bits == 32)
+		return 0xf0000000;
+
+	return 1 << bits;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx2/Kconfig b/roms/u-boot/arch/arm/mach-imx/mx2/Kconfig
new file mode 100644
index 000000000..fad5dcc94
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx2/Kconfig
@@ -0,0 +1,23 @@
+if ARCH_MX25
+
+config MX25
+	bool
+	default y
+	select SYS_FSL_ERRATUM_ESDHC_A001
+choice
+	prompt "MX25 board select"
+	optional
+
+config TARGET_ZMX25
+	bool "Support zmx25"
+	select BOARD_LATE_INIT
+	select CPU_ARM926EJS
+
+endchoice
+
+config SYS_SOC
+	default "mx25"
+
+source "board/syteco/zmx25/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx3/Kconfig b/roms/u-boot/arch/arm/mach-imx/mx3/Kconfig
new file mode 100644
index 000000000..42bba4822
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx3/Kconfig
@@ -0,0 +1,33 @@
+if ARCH_MX31
+
+config MX31
+       bool
+       default y
+choice
+	prompt "MX31 board select"
+	optional
+
+config TARGET_MX31PDK
+	bool "Support the i.MX31 PDK board from Freescale/NXP"
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
+endchoice
+
+config MX31_HCLK_FREQ
+       int "i.MX31 HCLK frequency"
+       default 26000000
+       help
+         Frequency in Hz of the high frequency input clock. Typically
+	 26000000 Hz.
+
+config MX31_CLK32
+       int "i.MX31 CLK32 Frequency"
+       default 32768
+       help
+         Frequency in Hz of the low frequency input clock. Typically
+	 32768 or 32000 Hz.
+
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx5/Kconfig b/roms/u-boot/arch/arm/mach-imx/mx5/Kconfig
new file mode 100644
index 000000000..580b45818
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx5/Kconfig
@@ -0,0 +1,83 @@
+if ARCH_MX5
+
+config MX5
+	bool
+	default y
+	select GPT_TIMER
+
+config MX51
+	bool
+	select ARM_CORTEX_A8_CVE_2017_5715
+	select SYS_FSL_ERRATUM_ESDHC_A001
+
+config MX53
+	bool
+	select ARM_CORTEX_A8_CVE_2017_5715
+
+choice
+	prompt "MX5 board select"
+	optional
+
+config TARGET_KP_IMX53
+	bool "Support K+P imx53 board"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_PMIC
+	select DM_SERIAL
+	select DM_MMC
+	select BLK
+	select DM_USB
+	select DM_REGULATOR
+	select MX53
+	imply CMD_DM
+
+config TARGET_M53MENLO
+	bool "Support m53menlo"
+	select MX53
+	select SUPPORT_SPL
+
+config TARGET_MX51EVK
+	bool "Support mx51evk"
+	select BOARD_LATE_INIT
+	select MX51
+
+config TARGET_MX53CX9020
+	bool "Support CX9020"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_SERIAL
+	select MX53
+	imply CMD_DM
+
+config TARGET_MX53LOCO
+	bool "Support mx53loco"
+	select BOARD_LATE_INIT
+	select MX53
+
+config TARGET_MX53PPD
+	bool "Support mx53ppd"
+	select MX53
+	help
+	  Enable support for the GE Healthcare PPD.
+
+config TARGET_USBARMORY
+	bool "Support USB armory"
+	select MX53
+
+endchoice
+
+config SYS_SOC
+	default "mx5"
+
+source "board/beckhoff/mx53cx9020/Kconfig"
+source "board/freescale/mx51evk/Kconfig"
+source "board/freescale/mx53loco/Kconfig"
+source "board/ge/mx53ppd/Kconfig"
+source "board/inversepath/usbarmory/Kconfig"
+source "board/k+p/kp_imx53/Kconfig"
+source "board/menlo/m53menlo/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx5/Makefile b/roms/u-boot/arch/arm/mach-imx/mx5/Makefile
new file mode 100644
index 000000000..40d199863
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx5/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2009 Freescale Semiconductor, Inc.
+
+obj-y := soc.o clock.o
+obj-y += lowlevel_init.o
+
+# common files for mx53 dram initialization
+obj-$(CONFIG_TARGET_MX53CX9020) += mx53_dram.o
+obj-$(CONFIG_TARGET_MX53LOCO)   += mx53_dram.o
diff --git a/roms/u-boot/arch/arm/mach-imx/mx5/clock.c b/roms/u-boot/arch/arm/mach-imx/mx5/clock.c
new file mode 100644
index 000000000..bbaddd5a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx5/clock.c
@@ -0,0 +1,982 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <log.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <div64.h>
+#include <asm/arch/sys_proto.h>
+
+enum pll_clocks {
+	PLL1_CLOCK = 0,
+	PLL2_CLOCK,
+	PLL3_CLOCK,
+#ifdef CONFIG_MX53
+	PLL4_CLOCK,
+#endif
+	PLL_CLOCKS,
+};
+
+struct mxc_pll_reg *mxc_plls[PLL_CLOCKS] = {
+	[PLL1_CLOCK] = (struct mxc_pll_reg *)PLL1_BASE_ADDR,
+	[PLL2_CLOCK] = (struct mxc_pll_reg *)PLL2_BASE_ADDR,
+	[PLL3_CLOCK] = (struct mxc_pll_reg *)PLL3_BASE_ADDR,
+#ifdef	CONFIG_MX53
+	[PLL4_CLOCK] = (struct mxc_pll_reg *)PLL4_BASE_ADDR,
+#endif
+};
+
+#define AHB_CLK_ROOT    133333333
+#define SZ_DEC_1M       1000000
+#define PLL_PD_MAX      16      /* Actual pd+1 */
+#define PLL_MFI_MAX     15
+#define PLL_MFI_MIN     5
+#define ARM_DIV_MAX     8
+#define IPG_DIV_MAX     4
+#define AHB_DIV_MAX     8
+#define EMI_DIV_MAX     8
+#define NFC_DIV_MAX     8
+
+#define MX5_CBCMR	0x00015154
+#define MX5_CBCDR	0x02888945
+
+struct fixed_pll_mfd {
+	u32 ref_clk_hz;
+	u32 mfd;
+};
+
+const struct fixed_pll_mfd fixed_mfd[] = {
+	{MXC_HCLK, 24 * 16},
+};
+
+struct pll_param {
+	u32 pd;
+	u32 mfi;
+	u32 mfn;
+	u32 mfd;
+};
+
+#define PLL_FREQ_MAX(ref_clk)  (4 * (ref_clk) * PLL_MFI_MAX)
+#define PLL_FREQ_MIN(ref_clk) \
+		((2 * (ref_clk) * (PLL_MFI_MIN - 1)) / PLL_PD_MAX)
+#define MAX_DDR_CLK     420000000
+#define NFC_CLK_MAX     34000000
+
+struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
+
+void set_usboh3_clk(void)
+{
+	clrsetbits_le32(&mxc_ccm->cscmr1,
+			MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK,
+			MXC_CCM_CSCMR1_USBOH3_CLK_SEL(1));
+	clrsetbits_le32(&mxc_ccm->cscdr1,
+			MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK |
+			MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK,
+			MXC_CCM_CSCDR1_USBOH3_CLK_PRED(4) |
+			MXC_CCM_CSCDR1_USBOH3_CLK_PODF(1));
+}
+
+void enable_usboh3_clk(bool enable)
+{
+	unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+	clrsetbits_le32(&mxc_ccm->CCGR2,
+			MXC_CCM_CCGR2_USBOH3_60M(MXC_CCM_CCGR_CG_MASK),
+			MXC_CCM_CCGR2_USBOH3_60M(cg));
+}
+
+#ifdef CONFIG_SYS_I2C_MXC
+/* i2c_num can be from 0, to 1 for i.MX51 and 2 for i.MX53 */
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
+{
+	u32 mask;
+
+#if defined(CONFIG_MX51)
+	if (i2c_num > 1)
+#elif defined(CONFIG_MX53)
+	if (i2c_num > 2)
+#endif
+		return -EINVAL;
+	mask = MXC_CCM_CCGR_CG_MASK <<
+			(MXC_CCM_CCGR1_I2C1_OFFSET + (i2c_num << 1));
+	if (enable)
+		setbits_le32(&mxc_ccm->CCGR1, mask);
+	else
+		clrbits_le32(&mxc_ccm->CCGR1, mask);
+	return 0;
+}
+#endif
+
+void set_usb_phy_clk(void)
+{
+	clrbits_le32(&mxc_ccm->cscmr1, MXC_CCM_CSCMR1_USB_PHY_CLK_SEL);
+}
+
+#if defined(CONFIG_MX51)
+void enable_usb_phy1_clk(bool enable)
+{
+	unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+	clrsetbits_le32(&mxc_ccm->CCGR2,
+			MXC_CCM_CCGR2_USB_PHY(MXC_CCM_CCGR_CG_MASK),
+			MXC_CCM_CCGR2_USB_PHY(cg));
+}
+
+void enable_usb_phy2_clk(bool enable)
+{
+	/* i.MX51 has a single USB PHY clock, so do nothing here. */
+}
+#elif defined(CONFIG_MX53)
+void enable_usb_phy1_clk(bool enable)
+{
+	unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+	clrsetbits_le32(&mxc_ccm->CCGR4,
+			MXC_CCM_CCGR4_USB_PHY1(MXC_CCM_CCGR_CG_MASK),
+			MXC_CCM_CCGR4_USB_PHY1(cg));
+}
+
+void enable_usb_phy2_clk(bool enable)
+{
+	unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+	clrsetbits_le32(&mxc_ccm->CCGR4,
+			MXC_CCM_CCGR4_USB_PHY2(MXC_CCM_CCGR_CG_MASK),
+			MXC_CCM_CCGR4_USB_PHY2(cg));
+}
+#endif
+
+/*
+ * Calculate the frequency of PLLn.
+ */
+static uint32_t decode_pll(struct mxc_pll_reg *pll, uint32_t infreq)
+{
+	uint32_t ctrl, op, mfd, mfn, mfi, pdf, ret;
+	uint64_t refclk, temp;
+	int32_t mfn_abs;
+
+	ctrl = readl(&pll->ctrl);
+
+	if (ctrl & MXC_DPLLC_CTL_HFSM) {
+		mfn = readl(&pll->hfs_mfn);
+		mfd = readl(&pll->hfs_mfd);
+		op = readl(&pll->hfs_op);
+	} else {
+		mfn = readl(&pll->mfn);
+		mfd = readl(&pll->mfd);
+		op = readl(&pll->op);
+	}
+
+	mfd &= MXC_DPLLC_MFD_MFD_MASK;
+	mfn &= MXC_DPLLC_MFN_MFN_MASK;
+	pdf = op & MXC_DPLLC_OP_PDF_MASK;
+	mfi = MXC_DPLLC_OP_MFI_RD(op);
+
+	/* 21.2.3 */
+	if (mfi < 5)
+		mfi = 5;
+
+	/* Sign extend */
+	if (mfn >= 0x04000000) {
+		mfn |= 0xfc000000;
+		mfn_abs = -mfn;
+	} else
+		mfn_abs = mfn;
+
+	refclk = infreq * 2;
+	if (ctrl & MXC_DPLLC_CTL_DPDCK0_2_EN)
+		refclk *= 2;
+
+	do_div(refclk, pdf + 1);
+	temp = refclk * mfn_abs;
+	do_div(temp, mfd + 1);
+	ret = refclk * mfi;
+
+	if ((int)mfn < 0)
+		ret -= temp;
+	else
+		ret += temp;
+
+	return ret;
+}
+
+#ifdef CONFIG_MX51
+/*
+ * This function returns the Frequency Pre-Multiplier clock.
+ */
+static u32 get_fpm(void)
+{
+	u32 mult;
+	u32 ccr = readl(&mxc_ccm->ccr);
+
+	if (ccr & MXC_CCM_CCR_FPM_MULT)
+		mult = 1024;
+	else
+		mult = 512;
+
+	return MXC_CLK32 * mult;
+}
+#endif
+
+/*
+ * This function returns the low power audio clock.
+ */
+static u32 get_lp_apm(void)
+{
+	u32 ret_val = 0;
+	u32 ccsr = readl(&mxc_ccm->ccsr);
+
+	if (ccsr & MXC_CCM_CCSR_LP_APM)
+#if defined(CONFIG_MX51)
+		ret_val = get_fpm();
+#elif defined(CONFIG_MX53)
+		ret_val = decode_pll(mxc_plls[PLL4_CLOCK], MXC_HCLK);
+#endif
+	else
+		ret_val = MXC_HCLK;
+
+	return ret_val;
+}
+
+/*
+ * Get mcu main rate
+ */
+u32 get_mcu_main_clk(void)
+{
+	u32 reg, freq;
+
+	reg = MXC_CCM_CACRR_ARM_PODF_RD(readl(&mxc_ccm->cacrr));
+	freq = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK);
+	return freq / (reg + 1);
+}
+
+/*
+ * Get the rate of peripheral's root clock.
+ */
+u32 get_periph_clk(void)
+{
+	u32 reg;
+
+	reg = readl(&mxc_ccm->cbcdr);
+	if (!(reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL))
+		return decode_pll(mxc_plls[PLL2_CLOCK], MXC_HCLK);
+	reg = readl(&mxc_ccm->cbcmr);
+	switch (MXC_CCM_CBCMR_PERIPH_CLK_SEL_RD(reg)) {
+	case 0:
+		return decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK);
+	case 1:
+		return decode_pll(mxc_plls[PLL3_CLOCK], MXC_HCLK);
+	case 2:
+		return get_lp_apm();
+	default:
+		return 0;
+	}
+	/* NOTREACHED */
+}
+
+/*
+ * Get the rate of ipg clock.
+ */
+static u32 get_ipg_clk(void)
+{
+	uint32_t freq, reg, div;
+
+	freq = get_ahb_clk();
+
+	reg = readl(&mxc_ccm->cbcdr);
+	div = MXC_CCM_CBCDR_IPG_PODF_RD(reg) + 1;
+
+	return freq / div;
+}
+
+/*
+ * Get the rate of ipg_per clock.
+ */
+static u32 get_ipg_per_clk(void)
+{
+	u32 freq, pred1, pred2, podf;
+
+	if (readl(&mxc_ccm->cbcmr) & MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL)
+		return get_ipg_clk();
+
+	if (readl(&mxc_ccm->cbcmr) & MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL)
+		freq = get_lp_apm();
+	else
+		freq = get_periph_clk();
+	podf = readl(&mxc_ccm->cbcdr);
+	pred1 = MXC_CCM_CBCDR_PERCLK_PRED1_RD(podf);
+	pred2 = MXC_CCM_CBCDR_PERCLK_PRED2_RD(podf);
+	podf = MXC_CCM_CBCDR_PERCLK_PODF_RD(podf);
+	return freq / ((pred1 + 1) * (pred2 + 1) * (podf + 1));
+}
+
+/* Get the output clock rate of a standard PLL MUX for peripherals. */
+static u32 get_standard_pll_sel_clk(u32 clk_sel)
+{
+	u32 freq = 0;
+
+	switch (clk_sel & 0x3) {
+	case 0:
+		freq = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK);
+		break;
+	case 1:
+		freq = decode_pll(mxc_plls[PLL2_CLOCK], MXC_HCLK);
+		break;
+	case 2:
+		freq = decode_pll(mxc_plls[PLL3_CLOCK], MXC_HCLK);
+		break;
+	case 3:
+		freq = get_lp_apm();
+		break;
+	}
+
+	return freq;
+}
+
+/*
+ * Get the rate of uart clk.
+ */
+static u32 get_uart_clk(void)
+{
+	unsigned int clk_sel, freq, reg, pred, podf;
+
+	reg = readl(&mxc_ccm->cscmr1);
+	clk_sel = MXC_CCM_CSCMR1_UART_CLK_SEL_RD(reg);
+	freq = get_standard_pll_sel_clk(clk_sel);
+
+	reg = readl(&mxc_ccm->cscdr1);
+	pred = MXC_CCM_CSCDR1_UART_CLK_PRED_RD(reg);
+	podf = MXC_CCM_CSCDR1_UART_CLK_PODF_RD(reg);
+	freq /= (pred + 1) * (podf + 1);
+
+	return freq;
+}
+
+/*
+ * get cspi clock rate.
+ */
+static u32 imx_get_cspiclk(void)
+{
+	u32 ret_val = 0, pdf, pre_pdf, clk_sel, freq;
+	u32 cscmr1 = readl(&mxc_ccm->cscmr1);
+	u32 cscdr2 = readl(&mxc_ccm->cscdr2);
+
+	pre_pdf = MXC_CCM_CSCDR2_CSPI_CLK_PRED_RD(cscdr2);
+	pdf = MXC_CCM_CSCDR2_CSPI_CLK_PODF_RD(cscdr2);
+	clk_sel = MXC_CCM_CSCMR1_CSPI_CLK_SEL_RD(cscmr1);
+	freq = get_standard_pll_sel_clk(clk_sel);
+	ret_val = freq / ((pre_pdf + 1) * (pdf + 1));
+	return ret_val;
+}
+
+/*
+ * get esdhc clock rate.
+ */
+static u32 get_esdhc_clk(u32 port)
+{
+	u32 clk_sel = 0, pred = 0, podf = 0, freq = 0;
+	u32 cscmr1 = readl(&mxc_ccm->cscmr1);
+	u32 cscdr1 = readl(&mxc_ccm->cscdr1);
+
+	switch (port) {
+	case 0:
+		clk_sel = MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_RD(cscmr1);
+		pred = MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_RD(cscdr1);
+		podf = MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_RD(cscdr1);
+		break;
+	case 1:
+		clk_sel = MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_RD(cscmr1);
+		pred = MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_RD(cscdr1);
+		podf = MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_RD(cscdr1);
+		break;
+	case 2:
+		if (cscmr1 & MXC_CCM_CSCMR1_ESDHC3_CLK_SEL)
+			return get_esdhc_clk(1);
+		else
+			return get_esdhc_clk(0);
+	case 3:
+		if (cscmr1 & MXC_CCM_CSCMR1_ESDHC4_CLK_SEL)
+			return get_esdhc_clk(1);
+		else
+			return get_esdhc_clk(0);
+	default:
+		break;
+	}
+
+	freq = get_standard_pll_sel_clk(clk_sel) / ((pred + 1) * (podf + 1));
+	return freq;
+}
+
+static u32 get_axi_a_clk(void)
+{
+	u32 cbcdr = readl(&mxc_ccm->cbcdr);
+	u32 pdf = MXC_CCM_CBCDR_AXI_A_PODF_RD(cbcdr);
+
+	return  get_periph_clk() / (pdf + 1);
+}
+
+static u32 get_axi_b_clk(void)
+{
+	u32 cbcdr = readl(&mxc_ccm->cbcdr);
+	u32 pdf = MXC_CCM_CBCDR_AXI_B_PODF_RD(cbcdr);
+
+	return  get_periph_clk() / (pdf + 1);
+}
+
+static u32 get_emi_slow_clk(void)
+{
+	u32 cbcdr = readl(&mxc_ccm->cbcdr);
+	u32 emi_clk_sel = cbcdr & MXC_CCM_CBCDR_EMI_CLK_SEL;
+	u32 pdf = MXC_CCM_CBCDR_EMI_PODF_RD(cbcdr);
+
+	if (emi_clk_sel)
+		return  get_ahb_clk() / (pdf + 1);
+
+	return  get_periph_clk() / (pdf + 1);
+}
+
+static u32 get_ddr_clk(void)
+{
+	u32 ret_val = 0;
+	u32 cbcmr = readl(&mxc_ccm->cbcmr);
+	u32 ddr_clk_sel = MXC_CCM_CBCMR_DDR_CLK_SEL_RD(cbcmr);
+#ifdef CONFIG_MX51
+	u32 cbcdr = readl(&mxc_ccm->cbcdr);
+	if (cbcdr & MXC_CCM_CBCDR_DDR_HIFREQ_SEL) {
+		u32 ddr_clk_podf = MXC_CCM_CBCDR_DDR_PODF_RD(cbcdr);
+
+		ret_val = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK);
+		ret_val /= ddr_clk_podf + 1;
+
+		return ret_val;
+	}
+#endif
+	switch (ddr_clk_sel) {
+	case 0:
+		ret_val = get_axi_a_clk();
+		break;
+	case 1:
+		ret_val = get_axi_b_clk();
+		break;
+	case 2:
+		ret_val = get_emi_slow_clk();
+		break;
+	case 3:
+		ret_val = get_ahb_clk();
+		break;
+	default:
+		break;
+	}
+
+	return ret_val;
+}
+
+/*
+ * The API of get mxc clocks.
+ */
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return get_mcu_main_clk();
+	case MXC_AHB_CLK:
+		return get_ahb_clk();
+	case MXC_IPG_CLK:
+		return get_ipg_clk();
+	case MXC_IPG_PERCLK:
+	case MXC_I2C_CLK:
+		return get_ipg_per_clk();
+	case MXC_UART_CLK:
+		return get_uart_clk();
+	case MXC_CSPI_CLK:
+		return imx_get_cspiclk();
+	case MXC_ESDHC_CLK:
+		return get_esdhc_clk(0);
+	case MXC_ESDHC2_CLK:
+		return get_esdhc_clk(1);
+	case MXC_ESDHC3_CLK:
+		return get_esdhc_clk(2);
+	case MXC_ESDHC4_CLK:
+		return get_esdhc_clk(3);
+	case MXC_FEC_CLK:
+		return get_ipg_clk();
+	case MXC_SATA_CLK:
+		return get_ahb_clk();
+	case MXC_DDR_CLK:
+		return get_ddr_clk();
+	default:
+		break;
+	}
+	return -EINVAL;
+}
+
+u32 imx_get_uartclk(void)
+{
+	return get_uart_clk();
+}
+
+u32 imx_get_fecclk(void)
+{
+	return get_ipg_clk();
+}
+
+static int gcd(int m, int n)
+{
+	int t;
+	while (m > 0) {
+		if (n > m) {
+			t = m;
+			m = n;
+			n = t;
+		} /* swap */
+		m -= n;
+	}
+	return n;
+}
+
+/*
+ * This is to calculate various parameters based on reference clock and
+ * targeted clock based on the equation:
+ *      t_clk = 2*ref_freq*(mfi + mfn/(mfd+1))/(pd+1)
+ * This calculation is based on a fixed MFD value for simplicity.
+ */
+static int calc_pll_params(u32 ref, u32 target, struct pll_param *pll)
+{
+	u64 pd, mfi = 1, mfn, mfd, t1;
+	u32 n_target = target;
+	u32 n_ref = ref, i;
+
+	/*
+	 * Make sure targeted freq is in the valid range.
+	 * Otherwise the following calculation might be wrong!!!
+	 */
+	if (n_target < PLL_FREQ_MIN(ref) ||
+		n_target > PLL_FREQ_MAX(ref)) {
+		printf("Targeted peripheral clock should be"
+			"within [%d - %d]\n",
+			PLL_FREQ_MIN(ref) / SZ_DEC_1M,
+			PLL_FREQ_MAX(ref) / SZ_DEC_1M);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(fixed_mfd); i++) {
+		if (fixed_mfd[i].ref_clk_hz == ref) {
+			mfd = fixed_mfd[i].mfd;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(fixed_mfd))
+		return -EINVAL;
+
+	/* Use n_target and n_ref to avoid overflow */
+	for (pd = 1; pd <= PLL_PD_MAX; pd++) {
+		t1 = n_target * pd;
+		do_div(t1, (4 * n_ref));
+		mfi = t1;
+		if (mfi > PLL_MFI_MAX)
+			return -EINVAL;
+		else if (mfi < 5)
+			continue;
+		break;
+	}
+	/*
+	 * Now got pd and mfi already
+	 *
+	 * mfn = (((n_target * pd) / 4 - n_ref * mfi) * mfd) / n_ref;
+	 */
+	t1 = n_target * pd;
+	do_div(t1, 4);
+	t1 -= n_ref * mfi;
+	t1 *= mfd;
+	do_div(t1, n_ref);
+	mfn = t1;
+	debug("ref=%d, target=%d, pd=%d," "mfi=%d,mfn=%d, mfd=%d\n",
+		ref, n_target, (u32)pd, (u32)mfi, (u32)mfn, (u32)mfd);
+	i = 1;
+	if (mfn != 0)
+		i = gcd(mfd, mfn);
+	pll->pd = (u32)pd;
+	pll->mfi = (u32)mfi;
+	do_div(mfn, i);
+	pll->mfn = (u32)mfn;
+	do_div(mfd, i);
+	pll->mfd = (u32)mfd;
+
+	return 0;
+}
+
+#define calc_div(tgt_clk, src_clk, limit) ({		\
+		u32 v = 0;				\
+		if (((src_clk) % (tgt_clk)) <= 100)	\
+			v = (src_clk) / (tgt_clk);	\
+		else					\
+			v = ((src_clk) / (tgt_clk)) + 1;\
+		if (v > limit)				\
+			v = limit;			\
+		(v - 1);				\
+	})
+
+#define CHANGE_PLL_SETTINGS(pll, pd, fi, fn, fd) \
+	{	\
+		writel(0x1232, &pll->ctrl);		\
+		writel(0x2, &pll->config);		\
+		writel((((pd) - 1) << 0) | ((fi) << 4),	\
+			&pll->op);			\
+		writel(fn, &(pll->mfn));		\
+		writel((fd) - 1, &pll->mfd);		\
+		writel((((pd) - 1) << 0) | ((fi) << 4),	\
+			&pll->hfs_op);			\
+		writel(fn, &pll->hfs_mfn);		\
+		writel((fd) - 1, &pll->hfs_mfd);	\
+		writel(0x1232, &pll->ctrl);		\
+		while (!readl(&pll->ctrl) & 0x1)	\
+			;\
+	}
+
+static int config_pll_clk(enum pll_clocks index, struct pll_param *pll_param)
+{
+	u32 ccsr = readl(&mxc_ccm->ccsr);
+	struct mxc_pll_reg *pll = mxc_plls[index];
+
+	switch (index) {
+	case PLL1_CLOCK:
+		/* Switch ARM to PLL2 clock */
+		writel(ccsr | MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
+		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
+					pll_param->mfi, pll_param->mfn,
+					pll_param->mfd);
+		/* Switch back */
+		writel(ccsr & ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
+		break;
+	case PLL2_CLOCK:
+		/* Switch to pll2 bypass clock */
+		writel(ccsr | MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
+		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
+					pll_param->mfi, pll_param->mfn,
+					pll_param->mfd);
+		/* Switch back */
+		writel(ccsr & ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
+		break;
+	case PLL3_CLOCK:
+		/* Switch to pll3 bypass clock */
+		writel(ccsr | MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
+		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
+					pll_param->mfi, pll_param->mfn,
+					pll_param->mfd);
+		/* Switch back */
+		writel(ccsr & ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
+		break;
+#ifdef CONFIG_MX53
+	case PLL4_CLOCK:
+		/* Switch to pll4 bypass clock */
+		writel(ccsr | MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
+		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
+					pll_param->mfi, pll_param->mfn,
+					pll_param->mfd);
+		/* Switch back */
+		writel(ccsr & ~MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Config CPU clock */
+static int config_core_clk(u32 ref, u32 freq)
+{
+	int ret = 0;
+	struct pll_param pll_param;
+
+	memset(&pll_param, 0, sizeof(struct pll_param));
+
+	/* The case that periph uses PLL1 is not considered here */
+	ret = calc_pll_params(ref, freq, &pll_param);
+	if (ret != 0) {
+		printf("Error:Can't find pll parameters: %d\n", ret);
+		return ret;
+	}
+
+	return config_pll_clk(PLL1_CLOCK, &pll_param);
+}
+
+static int config_nfc_clk(u32 nfc_clk)
+{
+	u32 parent_rate = get_emi_slow_clk();
+	u32 div;
+
+	if (nfc_clk == 0)
+		return -EINVAL;
+	div = parent_rate / nfc_clk;
+	if (div == 0)
+		div++;
+	if (parent_rate / div > NFC_CLK_MAX)
+		div++;
+	clrsetbits_le32(&mxc_ccm->cbcdr,
+			MXC_CCM_CBCDR_NFC_PODF_MASK,
+			MXC_CCM_CBCDR_NFC_PODF(div - 1));
+	while (readl(&mxc_ccm->cdhipr) != 0)
+		;
+	return 0;
+}
+
+void enable_nfc_clk(unsigned char enable)
+{
+	unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+	clrsetbits_le32(&mxc_ccm->CCGR5,
+		MXC_CCM_CCGR5_EMI_ENFC(MXC_CCM_CCGR_CG_MASK),
+		MXC_CCM_CCGR5_EMI_ENFC(cg));
+}
+
+#ifdef CONFIG_FSL_IIM
+void enable_efuse_prog_supply(bool enable)
+{
+	if (enable)
+		setbits_le32(&mxc_ccm->cgpr,
+			     MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE);
+	else
+		clrbits_le32(&mxc_ccm->cgpr,
+			     MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE);
+}
+#endif
+
+/* Config main_bus_clock for periphs */
+static int config_periph_clk(u32 ref, u32 freq)
+{
+	int ret = 0;
+	struct pll_param pll_param;
+
+	memset(&pll_param, 0, sizeof(struct pll_param));
+
+	if (readl(&mxc_ccm->cbcdr) & MXC_CCM_CBCDR_PERIPH_CLK_SEL) {
+		ret = calc_pll_params(ref, freq, &pll_param);
+		if (ret != 0) {
+			printf("Error:Can't find pll parameters: %d\n",
+				ret);
+			return ret;
+		}
+		switch (MXC_CCM_CBCMR_PERIPH_CLK_SEL_RD(
+				readl(&mxc_ccm->cbcmr))) {
+		case 0:
+			return config_pll_clk(PLL1_CLOCK, &pll_param);
+			break;
+		case 1:
+			return config_pll_clk(PLL3_CLOCK, &pll_param);
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int config_ddr_clk(u32 emi_clk)
+{
+	u32 clk_src;
+	s32 shift = 0, clk_sel, div = 1;
+	u32 cbcmr = readl(&mxc_ccm->cbcmr);
+
+	if (emi_clk > MAX_DDR_CLK) {
+		printf("Warning:DDR clock should not exceed %d MHz\n",
+			MAX_DDR_CLK / SZ_DEC_1M);
+		emi_clk = MAX_DDR_CLK;
+	}
+
+	clk_src = get_periph_clk();
+	/* Find DDR clock input */
+	clk_sel = MXC_CCM_CBCMR_DDR_CLK_SEL_RD(cbcmr);
+	switch (clk_sel) {
+	case 0:
+		shift = 16;
+		break;
+	case 1:
+		shift = 19;
+		break;
+	case 2:
+		shift = 22;
+		break;
+	case 3:
+		shift = 10;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if ((clk_src % emi_clk) < 10000000)
+		div = clk_src / emi_clk;
+	else
+		div = (clk_src / emi_clk) + 1;
+	if (div > 8)
+		div = 8;
+
+	clrsetbits_le32(&mxc_ccm->cbcdr, 0x7 << shift, (div - 1) << shift);
+	while (readl(&mxc_ccm->cdhipr) != 0)
+		;
+	writel(0x0, &mxc_ccm->ccdr);
+
+	return 0;
+}
+
+#ifdef CONFIG_MX53
+static int config_ldb_clk(u32 ref, u32 freq)
+{
+	int ret = 0;
+	struct pll_param pll_param;
+
+	memset(&pll_param, 0, sizeof(struct pll_param));
+
+	ret = calc_pll_params(ref, freq, &pll_param);
+	if (ret != 0) {
+		printf("Error:Can't find pll parameters: %d\n",
+			ret);
+		return ret;
+	}
+
+	return config_pll_clk(PLL4_CLOCK, &pll_param);
+}
+#else
+static int config_ldb_clk(u32 ref, u32 freq)
+{
+	/* Platform not supported */
+	return -EINVAL;
+}
+#endif
+
+/*
+ * This function assumes the expected core clock has to be changed by
+ * modifying the PLL. This is NOT true always but for most of the times,
+ * it is. So it assumes the PLL output freq is the same as the expected
+ * core clock (presc=1) unless the core clock is less than PLL_FREQ_MIN.
+ * In the latter case, it will try to increase the presc value until
+ * (presc*core_clk) is greater than PLL_FREQ_MIN. It then makes call to
+ * calc_pll_params() and obtains the values of PD, MFI,MFN, MFD based
+ * on the targeted PLL and reference input clock to the PLL. Lastly,
+ * it sets the register based on these values along with the dividers.
+ * Note 1) There is no value checking for the passed-in divider values
+ *         so the caller has to make sure those values are sensible.
+ *      2) Also adjust the NFC divider such that the NFC clock doesn't
+ *         exceed NFC_CLK_MAX.
+ *      3) IPU HSP clock is independent of AHB clock. Even it can go up to
+ *         177MHz for higher voltage, this function fixes the max to 133MHz.
+ *      4) This function should not have allowed diag_printf() calls since
+ *         the serial driver has been stoped. But leave then here to allow
+ *         easy debugging by NOT calling the cyg_hal_plf_serial_stop().
+ */
+int mxc_set_clock(u32 ref, u32 freq, enum mxc_clock clk)
+{
+	freq *= SZ_DEC_1M;
+
+	switch (clk) {
+	case MXC_ARM_CLK:
+		if (config_core_clk(ref, freq))
+			return -EINVAL;
+		break;
+	case MXC_PERIPH_CLK:
+		if (config_periph_clk(ref, freq))
+			return -EINVAL;
+		break;
+	case MXC_DDR_CLK:
+		if (config_ddr_clk(freq))
+			return -EINVAL;
+		break;
+	case MXC_NFC_CLK:
+		if (config_nfc_clk(freq))
+			return -EINVAL;
+		break;
+	case MXC_LDB_CLK:
+		if (config_ldb_clk(ref, freq))
+			return -EINVAL;
+		break;
+	default:
+		printf("Warning:Unsupported or invalid clock type\n");
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_MX53
+/*
+ * The clock for the external interface can be set to use internal clock
+ * if fuse bank 4, row 3, bit 2 is set.
+ * This is an undocumented feature and it was confirmed by Freescale's support:
+ * Fuses (but not pins) may be used to configure SATA clocks.
+ * Particularly the i.MX53 Fuse_Map contains the next information
+ * about configuring SATA clocks :  SATA_ALT_REF_CLK[1:0] (offset 0x180C)
+ * '00' - 100MHz (External)
+ * '01' - 50MHz (External)
+ * '10' - 120MHz, internal (USB PHY)
+ * '11' - Reserved
+*/
+void mxc_set_sata_internal_clock(void)
+{
+	u32 *tmp_base =
+		(u32 *)(IIM_BASE_ADDR + 0x180c);
+
+	set_usb_phy_clk();
+
+	clrsetbits_le32(tmp_base, 0x6, 0x4);
+}
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Dump some core clockes.
+ */
+static int do_mx5_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+			     char *const argv[])
+{
+	u32 freq;
+
+	freq = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK);
+	printf("PLL1       %8d MHz\n", freq / 1000000);
+	freq = decode_pll(mxc_plls[PLL2_CLOCK], MXC_HCLK);
+	printf("PLL2       %8d MHz\n", freq / 1000000);
+	freq = decode_pll(mxc_plls[PLL3_CLOCK], MXC_HCLK);
+	printf("PLL3       %8d MHz\n", freq / 1000000);
+#ifdef	CONFIG_MX53
+	freq = decode_pll(mxc_plls[PLL4_CLOCK], MXC_HCLK);
+	printf("PLL4       %8d MHz\n", freq / 1000000);
+#endif
+
+	printf("\n");
+	printf("AHB        %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+	printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+	printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
+	printf("DDR        %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
+#ifdef CONFIG_MXC_SPI
+	printf("CSPI       %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
+#endif
+	return 0;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks,
+	"display clocks",
+	""
+);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx5/lowlevel_init.S b/roms/u-boot/arch/arm/mach-imx/mx5/lowlevel_init.S
new file mode 100644
index 000000000..b42cc3e9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx5/lowlevel_init.S
@@ -0,0 +1,428 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#include <config.h>
+#include <asm/arch/imx-regs.h>
+#include <generated/asm-offsets.h>
+#include <linux/linkage.h>
+
+.section ".text.init", "x"
+
+.macro init_arm_erratum
+	/* ARM erratum ID #468414 */
+	mrc 15, 0, r1, c1, c0, 1
+	orr r1, r1, #(1 << 5)    /* enable L1NEON bit */
+	mcr 15, 0, r1, c1, c0, 1
+.endm
+
+/*
+ * L2CC Cache setup/invalidation/disable
+ */
+.macro init_l2cc
+	/* explicitly disable L2 cache */
+	mrc 15, 0, r0, c1, c0, 1
+	bic r0, r0, #0x2
+	mcr 15, 0, r0, c1, c0, 1
+
+	/* reconfigure L2 cache aux control reg */
+	ldr r0, =0xC0 |			/* tag RAM */ \
+		 0x4 |			/* data RAM */ \
+		 1 << 24 |		/* disable write allocate delay */ \
+		 1 << 23 |		/* disable write allocate combine */ \
+		 1 << 22		/* disable write allocate */
+
+#if defined(CONFIG_MX51)
+	ldr r3, [r4, #ROM_SI_REV]
+	cmp r3, #0x10
+
+	/* disable write combine for TO 2 and lower revs */
+	orrls r0, r0, #1 << 25
+#endif
+
+	mcr 15, 1, r0, c9, c0, 2
+
+	/* enable L2 cache */
+	mrc 15, 0, r0, c1, c0, 1
+	orr r0, r0, #2
+	mcr 15, 0, r0, c1, c0, 1
+
+.endm /* init_l2cc */
+
+/* AIPS setup - Only setup MPROTx registers.
+ * The PACR default values are good.*/
+.macro init_aips
+	/*
+	 * Set all MPROTx to be non-bufferable, trusted for R/W,
+	 * not forced to user-mode.
+	 */
+	ldr r0, =AIPS1_BASE_ADDR
+	ldr r1, =0x77777777
+	str r1, [r0, #0x0]
+	str r1, [r0, #0x4]
+	ldr r0, =AIPS2_BASE_ADDR
+	str r1, [r0, #0x0]
+	str r1, [r0, #0x4]
+	/*
+	 * Clear the on and off peripheral modules Supervisor Protect bit
+	 * for SDMA to access them. Did not change the AIPS control registers
+	 * (offset 0x20) access type
+	 */
+.endm /* init_aips */
+
+/* M4IF setup */
+.macro init_m4if
+#ifdef CONFIG_MX51
+	/* VPU and IPU given higher priority (0x4)
+	 * IPU accesses with ID=0x1 given highest priority (=0xA)
+	 */
+	ldr r0, =M4IF_BASE_ADDR
+
+	ldr r1, =0x00000203
+	str r1, [r0, #0x40]
+
+	str r4, [r0, #0x44]
+
+	ldr r1, =0x00120125
+	str r1, [r0, #0x9C]
+
+	ldr r1, =0x001901A3
+	str r1, [r0, #0x48]
+
+#endif
+.endm /* init_m4if */
+
+.macro setup_pll pll, freq
+	ldr r0, =\pll
+	adr r2, W_DP_\freq
+	bl setup_pll_func
+.endm
+
+#define W_DP_OP		0
+#define W_DP_MFD	4
+#define W_DP_MFN	8
+
+setup_pll_func:
+	ldr r1, =0x00001232
+	str r1, [r0, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */
+	mov r1, #0x2
+	str r1, [r0, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */
+
+	ldr r1, [r2, #W_DP_OP]
+	str r1, [r0, #PLL_DP_OP]
+	str r1, [r0, #PLL_DP_HFS_OP]
+
+	ldr r1, [r2, #W_DP_MFD]
+	str r1, [r0, #PLL_DP_MFD]
+	str r1, [r0, #PLL_DP_HFS_MFD]
+
+	ldr r1, [r2, #W_DP_MFN]
+	str r1, [r0, #PLL_DP_MFN]
+	str r1, [r0, #PLL_DP_HFS_MFN]
+
+	ldr r1, =0x00001232
+	str r1, [r0, #PLL_DP_CTL]
+1:	ldr r1, [r0, #PLL_DP_CTL]
+	ands r1, r1, #0x1
+	beq 1b
+
+	/* r10 saved upper lr */
+	mov pc, lr
+
+.macro setup_pll_errata pll, freq
+	ldr r2, =\pll
+	str r4, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */
+	ldr r1, =0x00001236
+	str r1, [r2, #PLL_DP_CTL]    /* Restart PLL with PLM=1 */
+1:	ldr r1, [r2, #PLL_DP_CTL]    /* Wait for lock */
+	ands r1, r1, #0x1
+	beq 1b
+
+	ldr r5, \freq
+	str r5, [r2, #PLL_DP_MFN]    /* Modify MFN value */
+	str r5, [r2, #PLL_DP_HFS_MFN]
+
+	mov r1, #0x1
+	str r1, [r2, #PLL_DP_CONFIG] /* Reload MFN value */
+
+2:	ldr r1, [r2, #PLL_DP_CONFIG]
+	tst r1, #1
+	bne 2b
+
+	ldr r1, =100		     /* Wait at least 4 us */
+3:	subs r1, r1, #1
+	bge 3b
+
+	mov r1, #0x2
+	str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */
+.endm
+
+.macro init_clock
+#if defined (CONFIG_MX51)
+	ldr r0, =CCM_BASE_ADDR
+
+	/* Gate of clocks to the peripherals first */
+	ldr r1, =0x3FFFFFFF
+	str r1, [r0, #CLKCTL_CCGR0]
+	str r4, [r0, #CLKCTL_CCGR1]
+	str r4, [r0, #CLKCTL_CCGR2]
+	str r4, [r0, #CLKCTL_CCGR3]
+
+	ldr r1, =0x00030000
+	str r1, [r0, #CLKCTL_CCGR4]
+	ldr r1, =0x00FFF030
+	str r1, [r0, #CLKCTL_CCGR5]
+	ldr r1, =0x00000300
+	str r1, [r0, #CLKCTL_CCGR6]
+
+	/* Disable IPU and HSC dividers */
+	mov r1, #0x60000
+	str r1, [r0, #CLKCTL_CCDR]
+
+	/* Make sure to switch the DDR away from PLL 1 */
+	ldr r1, =0x19239145
+	str r1, [r0, #CLKCTL_CBCDR]
+	/* make sure divider effective */
+1:	ldr r1, [r0, #CLKCTL_CDHIPR]
+	cmp r1, #0x0
+	bne 1b
+
+	/* Switch ARM to step clock */
+	mov r1, #0x4
+	str r1, [r0, #CLKCTL_CCSR]
+
+#if defined(CONFIG_MX51_PLL_ERRATA)
+	setup_pll PLL1_BASE_ADDR, 864
+	setup_pll_errata PLL1_BASE_ADDR, W_DP_MFN_800_DIT
+#else
+	setup_pll PLL1_BASE_ADDR, 800
+#endif
+
+	setup_pll PLL3_BASE_ADDR, 665
+
+	/* Switch peripheral to PLL 3 */
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0x000010C0 | CONFIG_SYS_DDR_CLKSEL
+	str r1, [r0, #CLKCTL_CBCMR]
+	ldr r1, =0x13239145
+	str r1, [r0, #CLKCTL_CBCDR]
+	setup_pll PLL2_BASE_ADDR, 665
+
+	/* Switch peripheral to PLL2 */
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0x19239145
+	str r1, [r0, #CLKCTL_CBCDR]
+	ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL
+	str r1, [r0, #CLKCTL_CBCMR]
+
+	setup_pll PLL3_BASE_ADDR, 216
+
+	/* Set the platform clock dividers */
+	ldr r0, =ARM_BASE_ADDR
+	ldr r1, =0x00000725
+	str r1, [r0, #0x14]
+
+	ldr r0, =CCM_BASE_ADDR
+
+	/* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */
+	ldr r3, [r4, #ROM_SI_REV]
+	cmp r3, #0x10
+	movls r1, #0x1
+	movhi r1, #0
+
+	str r1, [r0, #CLKCTL_CACRR]
+
+	/* Switch ARM back to PLL 1 */
+	str r4, [r0, #CLKCTL_CCSR]
+
+	/* setup the rest */
+	/* Use lp_apm (24MHz) source for perclk */
+	ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL
+	str r1, [r0, #CLKCTL_CBCMR]
+	/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
+	ldr r1, =CONFIG_SYS_CLKTL_CBCDR
+	str r1, [r0, #CLKCTL_CBCDR]
+
+	/* Restore the default values in the Gate registers */
+	ldr r1, =0xFFFFFFFF
+	str r1, [r0, #CLKCTL_CCGR0]
+	str r1, [r0, #CLKCTL_CCGR1]
+	str r1, [r0, #CLKCTL_CCGR2]
+	str r1, [r0, #CLKCTL_CCGR3]
+	str r1, [r0, #CLKCTL_CCGR4]
+	str r1, [r0, #CLKCTL_CCGR5]
+	str r1, [r0, #CLKCTL_CCGR6]
+
+	/* Use PLL 2 for UART's, get 66.5MHz from it */
+	ldr r1, =0xA5A2A020
+	str r1, [r0, #CLKCTL_CSCMR1]
+	ldr r1, =0x00C30321
+	str r1, [r0, #CLKCTL_CSCDR1]
+	/* make sure divider effective */
+1:	ldr r1, [r0, #CLKCTL_CDHIPR]
+	cmp r1, #0x0
+	bne 1b
+
+	str r4, [r0, #CLKCTL_CCDR]
+
+	/* for cko - for ARM div by 8 */
+	mov r1, #0x000A0000
+	add r1, r1, #0x00000F0
+	str r1, [r0, #CLKCTL_CCOSR]
+#else	/* CONFIG_MX53 */
+	ldr r0, =CCM_BASE_ADDR
+
+	/* Gate of clocks to the peripherals first */
+	ldr r1, =0x3FFFFFFF
+	str r1, [r0, #CLKCTL_CCGR0]
+	str r4, [r0, #CLKCTL_CCGR1]
+	str r4, [r0, #CLKCTL_CCGR2]
+	str r4, [r0, #CLKCTL_CCGR3]
+	str r4, [r0, #CLKCTL_CCGR7]
+	ldr r1, =0x00030000
+	str r1, [r0, #CLKCTL_CCGR4]
+	ldr r1, =0x00FFF030
+	str r1, [r0, #CLKCTL_CCGR5]
+	ldr r1, =0x0F00030F
+	str r1, [r0, #CLKCTL_CCGR6]
+
+	/* Switch ARM to step clock */
+	mov r1, #0x4
+	str r1, [r0, #CLKCTL_CCSR]
+
+	setup_pll PLL1_BASE_ADDR, 800
+
+	setup_pll PLL3_BASE_ADDR, 400
+
+	/* Switch peripheral to PLL3 */
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0x00015154
+	str r1, [r0, #CLKCTL_CBCMR]
+	ldr r1, =0x02898945
+	str r1, [r0, #CLKCTL_CBCDR]
+	/* make sure change is effective */
+1:      ldr r1, [r0, #CLKCTL_CDHIPR]
+	cmp r1, #0x0
+	bne 1b
+
+	setup_pll PLL2_BASE_ADDR, 400
+
+	/* Switch peripheral to PLL2 */
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0x00888945
+	str r1, [r0, #CLKCTL_CBCDR]
+
+	ldr r1, =0x00016154
+	str r1, [r0, #CLKCTL_CBCMR]
+
+	/*change uart clk parent to pll2*/
+	ldr r1, [r0, #CLKCTL_CSCMR1]
+	and r1, r1, #0xfcffffff
+	orr r1, r1, #0x01000000
+	str r1, [r0, #CLKCTL_CSCMR1]
+
+	/* make sure change is effective */
+1:      ldr r1, [r0, #CLKCTL_CDHIPR]
+	cmp r1, #0x0
+	bne 1b
+
+	setup_pll PLL3_BASE_ADDR, 216
+
+	setup_pll PLL4_BASE_ADDR, 455
+
+	/* Set the platform clock dividers */
+	ldr r0, =ARM_BASE_ADDR
+	ldr r1, =0x00000124
+	str r1, [r0, #0x14]
+
+	ldr r0, =CCM_BASE_ADDR
+	mov r1, #0
+	str r1, [r0, #CLKCTL_CACRR]
+
+	/* Switch ARM back to PLL 1. */
+	mov r1, #0x0
+	str r1, [r0, #CLKCTL_CCSR]
+
+	/* make uart div=6 */
+	ldr r1, [r0, #CLKCTL_CSCDR1]
+	and r1, r1, #0xffffffc0
+	orr r1, r1, #0x0a
+	str r1, [r0, #CLKCTL_CSCDR1]
+
+	/* Restore the default values in the Gate registers */
+	ldr r1, =0xFFFFFFFF
+	str r1, [r0, #CLKCTL_CCGR0]
+	str r1, [r0, #CLKCTL_CCGR1]
+	str r1, [r0, #CLKCTL_CCGR2]
+	str r1, [r0, #CLKCTL_CCGR3]
+	str r1, [r0, #CLKCTL_CCGR4]
+	str r1, [r0, #CLKCTL_CCGR5]
+	str r1, [r0, #CLKCTL_CCGR6]
+	str r1, [r0, #CLKCTL_CCGR7]
+
+	mov r1, #0x00000
+	str r1, [r0, #CLKCTL_CCDR]
+
+	/* for cko - for ARM div by 8 */
+	mov r1, #0x000A0000
+	add r1, r1, #0x00000F0
+	str r1, [r0, #CLKCTL_CCOSR]
+
+#endif	/* CONFIG_MX53 */
+.endm
+
+ENTRY(lowlevel_init)
+	mov r10, lr
+	mov r4, #0	/* Fix R4 to 0 */
+
+#if defined(CONFIG_SYS_MAIN_PWR_ON)
+	ldr r0, =GPIO1_BASE_ADDR
+	ldr r1, [r0, #0x0]
+	orr r1, r1, #1 << 23
+	str r1, [r0, #0x0]
+	ldr r1, [r0, #0x4]
+	orr r1, r1, #1 << 23
+	str r1, [r0, #0x4]
+#endif
+
+	init_arm_erratum
+
+	init_l2cc
+
+	init_aips
+
+	init_m4if
+
+	init_clock
+
+	mov pc, r10
+ENDPROC(lowlevel_init)
+
+/* Board level setting value */
+#if defined(CONFIG_MX51_PLL_ERRATA)
+W_DP_864:		.word DP_OP_864
+			.word DP_MFD_864
+			.word DP_MFN_864
+W_DP_MFN_800_DIT:	.word DP_MFN_800_DIT
+#else
+W_DP_800:		.word DP_OP_800
+			.word DP_MFD_800
+			.word DP_MFN_800
+#endif
+#if defined(CONFIG_MX51)
+W_DP_665:		.word DP_OP_665
+			.word DP_MFD_665
+			.word DP_MFN_665
+#endif
+W_DP_216:		.word DP_OP_216
+			.word DP_MFD_216
+			.word DP_MFN_216
+W_DP_400:               .word DP_OP_400
+			.word DP_MFD_400
+			.word DP_MFN_400
+W_DP_455:               .word DP_OP_455
+			.word DP_MFD_455
+			.word DP_MFN_455
diff --git a/roms/u-boot/arch/arm/mach-imx/mx5/mx53_dram.c b/roms/u-boot/arch/arm/mach-imx/mx5/mx53_dram.c
new file mode 100644
index 000000000..f74414419
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx5/mx53_dram.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017  Beckhoff Automation GmbH & Co. KG
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+phys_size_t get_effective_memsize(void)
+{
+	/*
+	 * WARNING: We must override get_effective_memsize() function here
+	 * to report only the size of the first DRAM bank. This is to make
+	 * U-Boot relocator place U-Boot into valid memory, that is, at the
+	 * end of the first DRAM bank. If we did not override this function
+	 * like so, U-Boot would be placed at the address of the first DRAM
+	 * bank + total DRAM size - sizeof(uboot), which in the setup where
+	 * each DRAM bank contains 512MiB of DRAM would result in placing
+	 * U-Boot into invalid memory area close to the end of the first
+	 * DRAM bank.
+	 */
+	return get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+	gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx5/soc.c b/roms/u-boot/arch/arm/mach-imx/mx5/soc.c
new file mode 100644
index 000000000..47f531dc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx5/soc.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/cache.h>
+
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/mach-imx/boot_mode.h>
+
+#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
+#error "CPU_TYPE not defined"
+#endif
+
+u32 get_cpu_rev(void)
+{
+#ifdef CONFIG_MX51
+	int system_rev = 0x51000;
+#else
+	int system_rev = 0x53000;
+#endif
+	int reg = __raw_readl(ROM_SI_REV);
+
+#if defined(CONFIG_MX51)
+	switch (reg) {
+	case 0x02:
+		system_rev |= CHIP_REV_1_1;
+		break;
+	case 0x10:
+		if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
+			system_rev |= CHIP_REV_2_5;
+		else
+			system_rev |= CHIP_REV_2_0;
+		break;
+	case 0x20:
+		system_rev |= CHIP_REV_3_0;
+		break;
+	default:
+		system_rev |= CHIP_REV_1_0;
+		break;
+	}
+#else
+	if (reg < 0x20)
+		system_rev |= CHIP_REV_1_0;
+	else
+		system_rev |= reg;
+#endif
+	return system_rev;
+}
+
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	return get_cpu_rev();
+}
+#endif
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
+
+#if defined(CONFIG_FEC_MXC)
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	int i;
+	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+	struct fuse_bank *bank = &iim->bank[1];
+	struct fuse_bank1_regs *fuse =
+			(struct fuse_bank1_regs *)bank->fuse_regs;
+
+	for (i = 0; i < 6; i++)
+		mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
+}
+#endif
+
+#ifdef CONFIG_MX53
+#define IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT	BIT(30)
+
+void boot_mode_apply(unsigned cfg_val)
+{
+	void *lpgr = &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr;
+
+	if (cfg_val == MAKE_CFGVAL_PRIMARY_BOOT)
+		clrbits_le32(lpgr, IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
+	else if (cfg_val == MAKE_CFGVAL_SECONDARY_BOOT)
+		setbits_le32(lpgr, IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
+	else
+		writel(cfg_val, lpgr);
+}
+
+int boot_mode_getprisec(void)
+{
+	void *lpgr = &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr;
+
+	return !!(readl(lpgr) & IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
+}
+
+/*
+ * cfg_val will be used for
+ * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
+ *
+ * If bit 28 of LPGR is set upon watchdog reset,
+ * bits[25:0] of LPGR will move to SBMR.
+ */
+const struct boot_mode soc_boot_modes[] = {
+	{"normal",	MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
+	/* usb or serial download */
+	{"usb",		MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)},
+	{"sata",	MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)},
+	{"escpi1:0",	MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)},
+	{"escpi1:1",	MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)},
+	{"escpi1:2",	MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)},
+	{"escpi1:3",	MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)},
+	/* 4 bit bus width */
+	{"esdhc1",	MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
+	{"esdhc2",	MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
+	{"esdhc3",	MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
+	{"esdhc4",	MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
+	{"primary",	MAKE_CFGVAL_PRIMARY_BOOT},
+	{"secondary",	MAKE_CFGVAL_SECONDARY_BOOT},
+	{NULL,		0},
+};
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/Kconfig b/roms/u-boot/arch/arm/mach-imx/mx6/Kconfig
new file mode 100644
index 000000000..23cab3932
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/Kconfig
@@ -0,0 +1,696 @@
+if ARCH_MX6
+
+config MX6_SMP
+	bool
+	select ARM_ERRATA_751472
+	select ARM_ERRATA_761320
+	select ARM_ERRATA_794072
+	select ARM_ERRATA_845369
+	select MP
+
+config MX6
+	bool
+	default y
+	select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
+	select GPT_TIMER if !MX6UL && !MX6ULL
+	imply CMD_FUSE
+
+choice
+	prompt "i.MX6 SoC select"
+
+config MX6D
+	bool "i.MX 6Dual SoC support"
+	select HAS_CAAM
+	select MX6_SMP
+
+config MX6DL
+	bool "i.MX 6DualLite SoC support"
+	select HAS_CAAM
+	select MX6_SMP
+
+config MX6Q
+	bool "i.MX 6Quad SoC support"
+	select HAS_CAAM
+	select MX6_SMP
+
+config MX6QDL
+	bool "i.MX 6Dual and 6Quad SoC support"
+	select HAS_CAAM
+	select MX6_SMP
+
+config MX6S
+	bool "i.MX 6Solo SoC support"
+	select HAS_CAAM
+
+config MX6SL
+	bool "i.MX 6SoloLite SoC support"
+
+config MX6SX
+	bool "i.MX 6SoloX SoC support"
+	select HAS_CAAM
+	select ROM_UNIFIED_SECTIONS
+
+config MX6SLL
+	bool "i.MX 6SLL SoC support"
+	select ROM_UNIFIED_SECTIONS
+
+config MX6UL
+	bool "i.MX 6UltraLite SoC support"
+	select HAS_CAAM
+	select ROM_UNIFIED_SECTIONS
+	select SYSCOUNTER_TIMER
+	select SYS_L2CACHE_OFF
+
+config MX6ULL
+	bool "i.MX 6ULL SoC support"
+	select ROM_UNIFIED_SECTIONS
+	select SYSCOUNTER_TIMER
+	select SYS_L2CACHE_OFF
+
+endchoice
+
+config MX6UL_LITESOM
+	bool
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config MX6UL_OPOS6UL
+	bool
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_MMC
+	select DM_THERMAL
+	select SPL_DM if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_PINCTRL if SPL
+	select SPL_SEPARATE_BSS if SPL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config MX6_OCRAM_256KB
+	bool "Support 256KB OCRAM"
+	depends on MX6D || MX6Q
+	help
+	 Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series
+	 of chips, such as for SPL. The OCRAM of the Lite series of chips is
+	 only 128KB, so using this option will prevent the resulting code from
+	 working on those chips.
+
+config MX6_DDRCAL
+	bool "Include dynamic DDR calibration routines"
+	depends on SPL
+	default n
+	help
+	  Say "Y" if your board uses dynamic (per-boot) DDR calibration.
+	  If unsure, say N.
+
+choice
+	prompt "MX6 board select"
+	optional
+
+config TARGET_APALIS_IMX6
+	bool "Toradex Apalis iMX6 board"
+	depends on MX6Q
+	select BOARD_LATE_INIT
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+	imply CMD_SATA
+
+config TARGET_ARISTAINETOS2C
+	bool "Support aristainetos2-revC"
+	depends on MX6DL
+	select BOARD_LATE_INIT
+	select SYS_I2C_MXC
+	select MXC_UART
+	select FEC_MXC
+	select DM
+	imply CMD_SATA
+	imply CMD_DM
+
+config TARGET_ARISTAINETOS2CCSLB
+	bool "Support aristainetos2-revC CSL"
+	depends on MX6DL
+	select BOARD_LATE_INIT
+	select SYS_I2C_MXC
+	select MXC_UART
+	select FEC_MXC
+	select DM
+	imply CMD_SATA
+	imply CMD_DM
+
+config TARGET_CM_FX6
+	bool "CM-FX6"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_COLIBRI_IMX6
+	bool "Toradex Colibri iMX6 board"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_COLIBRI_IMX6ULL
+	bool "Toradex Colibri iMX6ULL"
+	depends on MX6ULL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+
+config TARGET_DART_6UL
+	bool "Variscite imx6ULL dart(DART-SOM-6ULL)"
+	depends on MX6ULL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_SERIAL
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_DHCOMIMX6
+	bool "dh_imx6"
+	depends on MX6QDL
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+	imply CMD_SPL
+
+config TARGET_DISPLAY5
+	bool "LWN DISPLAY5 board"
+	depends on MX6Q
+	select DM
+	select DM_ETH
+	select DM_I2C
+	select DM_MMC
+	select DM_SPI
+	select DM_GPIO
+	select DM_SERIAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_EMBESTMX6BOARDS
+	bool "embestmx6boards"
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
+config TARGET_GE_BX50V3
+	bool "General Electric Bx50v3"
+	depends on MX6Q
+	select BOARD_LATE_INIT
+
+config TARGET_GE_B1X5V2
+	bool "General Electric B1x5v2"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_GW_VENTANA
+	bool "gw_ventana"
+	depends on MX6QDL
+	select SUPPORT_SPL
+	imply CMD_SATA
+	imply CMD_SPL
+
+config TARGET_KOSAGI_NOVENA
+	bool "Kosagi Novena"
+	select BOARD_LATE_INIT
+	select DM_ETH
+	select DM_GPIO
+	select DM_MMC
+	select DM_PCI
+	select DM_SCSI
+	select DM_USB
+	select DM_VIDEO
+	select OF_CONTROL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MCCMON6
+	bool "mccmon6"
+	depends on MX6QDL
+	select SUPPORT_SPL
+	select DM
+	select DM_GPIO
+	select DM_ETH
+	select DM_SERIAL
+	select DM_I2C
+	select DM_SPI
+	imply CMD_DM
+
+config TARGET_MX6CUBOXI
+	bool "Solid-run mx6 boards"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
+config TARGET_MX6LOGICPD
+	bool "Logic PD i.MX6 SOM"
+	depends on MX6Q
+	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_PMIC
+	select OF_CONTROL
+	imply CMD_DM
+
+config TARGET_MX6MEMCAL
+	bool "mx6memcal"
+	depends on MX6QDL
+	select SUPPORT_SPL
+	help
+	  The mx6memcal board is a virtual board that can be used to validate
+	  and characterize the memory layout of a new design during the initial
+	  development and pre-production stages.
+
+config TARGET_MX6DL_MAMOJ
+	bool "Support BTicino Mamoj"
+	depends on MX6QDL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_PMIC
+	select DM_PMIC_PFUZE100
+	select DM_THERMAL
+	select OF_CONTROL
+	select PINCTRL
+	select SPL
+	select SPL_DM if SPL
+	select SPL_GPIO_SUPPORT if SPL
+	select SPL_LIBCOMMON_SUPPORT if SPL
+	select SPL_LIBDISK_SUPPORT if SPL
+	select SPL_LIBGENERIC_SUPPORT if SPL
+	select SPL_MMC_SUPPORT if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_OF_LIBFDT if SPL
+	select SPL_PINCTRL if SPL
+	select SPL_SEPARATE_BSS if SPL
+	select SPL_SERIAL_SUPPORT if SPL
+	select SPL_USB_GADGET if SPL
+	select SPL_USB_HOST_SUPPORT if SPL
+	select SPL_USB_SDP_SUPPORT if SPL
+	select SPL_WATCHDOG_SUPPORT if SPL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MX6Q_ENGICAM
+	bool "Support Engicam i.Core(RQS)"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_THERMAL
+	select OF_CONTROL
+	select SPL_DM if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_OF_LIBFDT
+	select SPL_PINCTRL if SPL
+	select SPL_SEPARATE_BSS if SPL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MX6SABREAUTO
+	bool "mx6sabreauto"
+	depends on MX6QDL
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MX6SABRESD
+	bool "mx6sabresd"
+	depends on MX6QDL
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MX6SLEVK
+	bool "mx6slevk"
+	depends on MX6SL
+	select SUPPORT_SPL
+
+config TARGET_MX6SLLEVK
+	bool "mx6sll evk"
+	depends on MX6SLL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	imply CMD_DM
+
+config TARGET_MX6SXSABRESD
+	bool "mx6sxsabresd"
+	depends on MX6SX
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_MX6SXSABREAUTO
+	bool "mx6sxsabreauto"
+	depends on MX6SX
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	imply CMD_DM
+
+config TARGET_MX6UL_9X9_EVK
+	bool "mx6ul_9x9_evk"
+	depends on MX6UL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MX6UL_14X14_EVK
+	bool "mx6ul_14x14_evk"
+	depends on MX6UL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MX6UL_ENGICAM
+	bool "Support Engicam GEAM6UL/Is.IoT"
+	depends on MX6UL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_THERMAL
+	select OF_CONTROL
+	select SPL_DM if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_PINCTRL if SPL
+	select SPL_SEPARATE_BSS if SPL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MX6ULL_14X14_EVK
+	bool "Support mx6ull_14x14_evk"
+	depends on MX6ULL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	imply CMD_DM
+
+config TARGET_MYS_6ULX
+	bool "MYiR MYS-6ULX"
+	depends on MX6ULL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_SERIAL
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_NITROGEN6X
+	bool "nitrogen6x"
+	depends on MX6DL || MX6Q || MX6QDL || MX6S
+	imply USB_ETHER_ASIX
+	imply USB_ETHER_MCS7830
+	imply USB_ETHER_SMSC95XX
+	imply USB_HOST_ETHER
+
+config TARGET_NPI_IMX6ULL
+	bool "Seeed NPI-IMX6ULL"
+	depends on MX6ULL
+	select DM
+	select DM_ETH
+	select DM_MMC
+	select DM_GPIO
+	select DM_SERIAL
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_OPOS6ULDEV
+	bool "Armadeus OPOS6ULDev board"
+	depends on MX6UL
+	select MX6UL_OPOS6UL
+
+config TARGET_PICO_IMX6
+	bool "PICO-IMX6"
+	depends on MX6QDL
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_PICO_IMX6UL
+	bool "PICO-IMX6UL-EMMC"
+	depends on MX6UL
+	select DM
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_LITEBOARD
+	bool "Grinn liteBoard (i.MX6UL)"
+	depends on MX6UL
+	select BOARD_LATE_INIT
+	select MX6UL_LITESOM
+
+config TARGET_PCM058
+	bool "Phytec PCM058 i.MX6 Quad"
+	depends on MX6Q
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select DM
+	select OF_CONTROL
+	imply CMD_DM
+
+config TARGET_PCL063
+	bool "PHYTEC PCL063 (phyCORE-i.MX6UL)"
+	depends on MX6UL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_SERIAL
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_PCL063_ULL
+	bool "PHYTEC PCL063 (phyCORE-i.MX6ULL)"
+	depends on MX6ULL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_SERIAL
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_SOMLABS_VISIONSOM_6ULL
+	bool "visionsom-6ull"
+	depends on MX6ULL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_MMC
+	select DM_SERIAL
+	select DM_THERMAL
+	imply CMD_DM
+
+config TARGET_TBS2910
+	bool "TBS2910 Matrix ARM mini PC"
+	depends on MX6Q
+
+config TARGET_KP_IMX6Q_TPC
+	bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
+	depends on MX6QDL
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select SPL_DM if SPL
+	select DM_THERMAL
+	select DM_MMC
+	select DM_ETH
+	select DM_REGULATOR
+	select SPL_DM_REGULATOR if SPL
+	select DM_SERIAL
+	select DM_I2C
+	select DM_GPIO
+	select DM_USB
+	select SUPPORT_SPL
+	select SPL_SEPARATE_BSS if SPL
+	imply CMD_DM
+	imply CMD_SPL
+
+config TARGET_TQMA6
+	bool "TQ Systems TQMa6 board"
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select MXC_SPI
+	select SPI
+	imply DM
+	imply DM_GPIO
+	imply DM_MMC
+	imply DM_SPI
+	imply DM_SPI_FLASH
+	imply DM_I2C
+	imply CMD_SF
+	imply CMD_DM
+
+config TARGET_UDOO
+	bool "udoo"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
+config TARGET_UDOO_NEO
+	bool "UDOO Neo"
+	depends on MX6SX
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_SOFTING_VINING_2000
+	bool "Softing VIN|ING 2000"
+	depends on MX6SX
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_WANDBOARD
+	bool "wandboard"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
+config TARGET_WARP
+	bool "WaRP"
+	depends on MX6SL
+	select BOARD_LATE_INIT
+
+config TARGET_BRPPT2
+	bool "brppt2"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select OF_CONTROL
+	select SPL_OF_LIBFDT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select SUPPORT_SPL
+	select SPL_DM if SPL
+	select SPL_OF_CONTROL if SPL
+        help
+          Support
+          B&R BRPPT2 platform
+          based on Freescale's iMX6 SoC
+
+config TARGET_O4_IMX6ULL_NANO
+	bool "O4-iMX6ULL-NANO"
+	depends on MX6ULL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	imply CMD_DM
+	help
+	  Support for www.out4.ru O4-iMX6UL-NANO platform
+	  based on Freescale's i.MX6UL/i.MX6ULL SoC.
+
+endchoice
+
+config SYS_SOC
+	default "mx6"
+
+source "board/ge/bx50v3/Kconfig"
+source "board/ge/b1x5v2/Kconfig"
+source "board/aristainetos/Kconfig"
+source "board/armadeus/opos6uldev/Kconfig"
+source "board/boundary/nitrogen6x/Kconfig"
+source "board/bticino/mamoj/Kconfig"
+source "board/compulab/cm_fx6/Kconfig"
+source "board/dhelectronics/dh_imx6/Kconfig"
+source "board/embest/mx6boards/Kconfig"
+source "board/engicam/imx6q/Kconfig"
+source "board/engicam/imx6ul/Kconfig"
+source "board/freescale/mx6memcal/Kconfig"
+source "board/freescale/mx6sabreauto/Kconfig"
+source "board/freescale/mx6sabresd/Kconfig"
+source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sllevk/Kconfig"
+source "board/freescale/mx6sxsabresd/Kconfig"
+source "board/freescale/mx6sxsabreauto/Kconfig"
+source "board/freescale/mx6ul_14x14_evk/Kconfig"
+source "board/freescale/mx6ullevk/Kconfig"
+source "board/grinn/liteboard/Kconfig"
+source "board/phytec/pcm058/Kconfig"
+source "board/phytec/pcl063/Kconfig"
+source "board/gateworks/gw_ventana/Kconfig"
+source "board/kosagi/novena/Kconfig"
+source "board/softing/vining_2000/Kconfig"
+source "board/liebherr/display5/Kconfig"
+source "board/liebherr/mccmon6/Kconfig"
+source "board/logicpd/imx6/Kconfig"
+source "board/solidrun/mx6cuboxi/Kconfig"
+source "board/somlabs/visionsom-6ull/Kconfig"
+source "board/technexion/pico-imx6/Kconfig"
+source "board/technexion/pico-imx6ul/Kconfig"
+source "board/tbs/tbs2910/Kconfig"
+source "board/tqc/tqma6/Kconfig"
+source "board/toradex/apalis_imx6/Kconfig"
+source "board/toradex/colibri_imx6/Kconfig"
+source "board/toradex/colibri-imx6ull/Kconfig"
+source "board/k+p/kp_imx6q_tpc/Kconfig"
+source "board/udoo/Kconfig"
+source "board/udoo/neo/Kconfig"
+source "board/wandboard/Kconfig"
+source "board/warp/Kconfig"
+source "board/BuR/brppt2/Kconfig"
+source "board/out4/o4-imx6ull-nano/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/Makefile b/roms/u-boot/arch/arm/mach-imx/mx6/Makefile
new file mode 100644
index 000000000..7ea8f91e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+
+obj-y	:= soc.o clock.o
+obj-$(CONFIG_IMX_MODULE_FUSE) += module_fuse.o
+obj-$(CONFIG_SPL_BUILD)	     += ddr.o
+obj-$(CONFIG_MP)             += mp.o
+obj-$(CONFIG_MX6UL_LITESOM)  += litesom.o
+obj-$(CONFIG_MX6UL_OPOS6UL)  += opos6ul.o
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/clock.c b/roms/u-boot/arch/arm/mach-imx/mx6/clock.c
new file mode 100644
index 000000000..cb9d629be
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/clock.c
@@ -0,0 +1,1500 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <div64.h>
+#include <log.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+enum pll_clocks {
+	PLL_SYS,	/* System PLL */
+	PLL_BUS,	/* System Bus PLL*/
+	PLL_USBOTG,	/* OTG USB PLL */
+	PLL_ENET,	/* ENET PLL */
+	PLL_AUDIO,	/* AUDIO PLL */
+	PLL_VIDEO,	/* VIDEO PLL */
+};
+
+struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+	u32 reg;
+
+	reg = __raw_readl(&imx_ccm->CCGR2);
+	if (enable)
+		reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
+	else
+		reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
+	__raw_writel(reg, &imx_ccm->CCGR2);
+}
+#endif
+
+#ifdef CONFIG_NAND_MXS
+void setup_gpmi_io_clk(u32 cfg)
+{
+	/* Disable clocks per ERR007177 from MX6 errata */
+	clrbits_le32(&imx_ccm->CCGR4,
+		     MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+#if defined(CONFIG_MX6SX)
+	clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
+
+	clrsetbits_le32(&imx_ccm->cs2cdr,
+			MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
+			MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
+			MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK,
+			cfg);
+
+	setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
+#else
+	clrbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+
+	clrsetbits_le32(&imx_ccm->cs2cdr,
+			MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
+			MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
+			MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
+			cfg);
+
+	setbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+#endif
+	setbits_le32(&imx_ccm->CCGR4,
+		     MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+}
+#endif
+
+void enable_usboh3_clk(unsigned char enable)
+{
+	u32 reg;
+
+	reg = __raw_readl(&imx_ccm->CCGR6);
+	if (enable)
+		reg |= MXC_CCM_CCGR6_USBOH3_MASK;
+	else
+		reg &= ~(MXC_CCM_CCGR6_USBOH3_MASK);
+	__raw_writel(reg, &imx_ccm->CCGR6);
+
+}
+
+#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX)
+void enable_enet_clk(unsigned char enable)
+{
+	u32 mask, *addr;
+
+	if (is_mx6ull()) {
+		mask = MXC_CCM_CCGR0_ENET_CLK_ENABLE_MASK;
+		addr = &imx_ccm->CCGR0;
+	} else if (is_mx6ul()) {
+		mask = MXC_CCM_CCGR3_ENET_MASK;
+		addr = &imx_ccm->CCGR3;
+	} else {
+		mask = MXC_CCM_CCGR1_ENET_MASK;
+		addr = &imx_ccm->CCGR1;
+	}
+
+	if (enable)
+		setbits_le32(addr, mask);
+	else
+		clrbits_le32(addr, mask);
+}
+#endif
+
+#ifdef CONFIG_MXC_UART
+void enable_uart_clk(unsigned char enable)
+{
+	u32 mask;
+
+	if (is_mx6ul() || is_mx6ull())
+		mask = MXC_CCM_CCGR5_UART_MASK;
+	else
+		mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
+
+	if (enable)
+		setbits_le32(&imx_ccm->CCGR5, mask);
+	else
+		clrbits_le32(&imx_ccm->CCGR5, mask);
+}
+#endif
+
+#ifdef CONFIG_MMC
+int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
+{
+	u32 mask;
+
+	if (bus_num > 3)
+		return -EINVAL;
+
+	mask = MXC_CCM_CCGR_CG_MASK << (bus_num * 2 + 2);
+	if (enable)
+		setbits_le32(&imx_ccm->CCGR6, mask);
+	else
+		clrbits_le32(&imx_ccm->CCGR6, mask);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_I2C_MXC
+/* i2c_num can be from 0 - 3 */
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
+{
+	u32 reg;
+	u32 mask;
+	u32 *addr;
+
+	if (i2c_num > 3)
+		return -EINVAL;
+	if (i2c_num < 3) {
+		mask = MXC_CCM_CCGR_CG_MASK
+			<< (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET
+			+ (i2c_num << 1));
+		reg = __raw_readl(&imx_ccm->CCGR2);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		__raw_writel(reg, &imx_ccm->CCGR2);
+	} else {
+		if (is_mx6sll())
+			return -EINVAL;
+		if (is_mx6sx() || is_mx6ul() || is_mx6ull()) {
+			mask = MXC_CCM_CCGR6_I2C4_MASK;
+			addr = &imx_ccm->CCGR6;
+		} else {
+			mask = MXC_CCM_CCGR1_I2C4_SERIAL_MASK;
+			addr = &imx_ccm->CCGR1;
+		}
+		reg = __raw_readl(addr);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		__raw_writel(reg, addr);
+	}
+	return 0;
+}
+#endif
+
+/* spi_num can be from 0 - SPI_MAX_NUM */
+int enable_spi_clk(unsigned char enable, unsigned spi_num)
+{
+	u32 reg;
+	u32 mask;
+
+	if (spi_num > SPI_MAX_NUM)
+		return -EINVAL;
+
+	mask = MXC_CCM_CCGR_CG_MASK << (spi_num << 1);
+	reg = __raw_readl(&imx_ccm->CCGR1);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, &imx_ccm->CCGR1);
+	return 0;
+}
+static u32 decode_pll(enum pll_clocks pll, u32 infreq)
+{
+	u32 div, test_div, pll_num, pll_denom;
+
+	switch (pll) {
+	case PLL_SYS:
+		div = __raw_readl(&imx_ccm->analog_pll_sys);
+		div &= BM_ANADIG_PLL_SYS_DIV_SELECT;
+
+		return (infreq * div) >> 1;
+	case PLL_BUS:
+		div = __raw_readl(&imx_ccm->analog_pll_528);
+		div &= BM_ANADIG_PLL_528_DIV_SELECT;
+
+		return infreq * (20 + (div << 1));
+	case PLL_USBOTG:
+		div = __raw_readl(&imx_ccm->analog_usb1_pll_480_ctrl);
+		div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT;
+
+		return infreq * (20 + (div << 1));
+	case PLL_ENET:
+		div = __raw_readl(&imx_ccm->analog_pll_enet);
+		div &= BM_ANADIG_PLL_ENET_DIV_SELECT;
+
+		return 25000000 * (div + (div >> 1) + 1);
+	case PLL_AUDIO:
+		div = __raw_readl(&imx_ccm->analog_pll_audio);
+		if (!(div & BM_ANADIG_PLL_AUDIO_ENABLE))
+			return 0;
+		/* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */
+		if (div & BM_ANADIG_PLL_AUDIO_BYPASS)
+			return MXC_HCLK;
+		pll_num = __raw_readl(&imx_ccm->analog_pll_audio_num);
+		pll_denom = __raw_readl(&imx_ccm->analog_pll_audio_denom);
+		test_div = (div & BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT) >>
+			BP_ANADIG_PLL_AUDIO_TEST_DIV_SELECT;
+		div &= BM_ANADIG_PLL_AUDIO_DIV_SELECT;
+		if (test_div == 3) {
+			debug("Error test_div\n");
+			return 0;
+		}
+		test_div = 1 << (2 - test_div);
+
+		return infreq * (div + pll_num / pll_denom) / test_div;
+	case PLL_VIDEO:
+		div = __raw_readl(&imx_ccm->analog_pll_video);
+		if (!(div & BM_ANADIG_PLL_VIDEO_ENABLE))
+			return 0;
+		/* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */
+		if (div & BM_ANADIG_PLL_VIDEO_BYPASS)
+			return MXC_HCLK;
+		pll_num = __raw_readl(&imx_ccm->analog_pll_video_num);
+		pll_denom = __raw_readl(&imx_ccm->analog_pll_video_denom);
+		test_div = (div & BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT) >>
+			BP_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
+		div &= BM_ANADIG_PLL_VIDEO_DIV_SELECT;
+		if (test_div == 3) {
+			debug("Error test_div\n");
+			return 0;
+		}
+		test_div = 1 << (2 - test_div);
+
+		return infreq * (div + pll_num / pll_denom) / test_div;
+	default:
+		return 0;
+	}
+	/* NOTREACHED */
+}
+static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
+{
+	u32 div;
+	u64 freq;
+
+	switch (pll) {
+	case PLL_BUS:
+		if (!is_mx6ul() && !is_mx6ull()) {
+			if (pfd_num == 3) {
+				/* No PFD3 on PLL2 */
+				return 0;
+			}
+		}
+		div = __raw_readl(&imx_ccm->analog_pfd_528);
+		freq = (u64)decode_pll(PLL_BUS, MXC_HCLK);
+		break;
+	case PLL_USBOTG:
+		div = __raw_readl(&imx_ccm->analog_pfd_480);
+		freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK);
+		break;
+	default:
+		/* No PFD on other PLL					     */
+		return 0;
+	}
+
+	return lldiv(freq * 18, (div & ANATOP_PFD_FRAC_MASK(pfd_num)) >>
+			      ANATOP_PFD_FRAC_SHIFT(pfd_num));
+}
+
+static u32 get_mcu_main_clk(void)
+{
+	u32 reg, freq;
+
+	reg = __raw_readl(&imx_ccm->cacrr);
+	reg &= MXC_CCM_CACRR_ARM_PODF_MASK;
+	reg >>= MXC_CCM_CACRR_ARM_PODF_OFFSET;
+	freq = decode_pll(PLL_SYS, MXC_HCLK);
+
+	return freq / (reg + 1);
+}
+
+u32 get_periph_clk(void)
+{
+	u32 reg, div = 0, freq = 0;
+
+	reg = __raw_readl(&imx_ccm->cbcdr);
+	if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) {
+		div = (reg & MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >>
+		       MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET;
+		reg = __raw_readl(&imx_ccm->cbcmr);
+		reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK;
+		reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET;
+
+		switch (reg) {
+		case 0:
+			freq = decode_pll(PLL_USBOTG, MXC_HCLK);
+			break;
+		case 1:
+		case 2:
+			freq = MXC_HCLK;
+			break;
+		default:
+			break;
+		}
+	} else {
+		reg = __raw_readl(&imx_ccm->cbcmr);
+		reg &= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK;
+		reg >>= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET;
+
+		switch (reg) {
+		case 0:
+			freq = decode_pll(PLL_BUS, MXC_HCLK);
+			break;
+		case 1:
+			freq = mxc_get_pll_pfd(PLL_BUS, 2);
+			break;
+		case 2:
+			freq = mxc_get_pll_pfd(PLL_BUS, 0);
+			break;
+		case 3:
+			/* static / 2 divider */
+			freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return freq / (div + 1);
+}
+
+static u32 get_ipg_clk(void)
+{
+	u32 reg, ipg_podf;
+
+	reg = __raw_readl(&imx_ccm->cbcdr);
+	reg &= MXC_CCM_CBCDR_IPG_PODF_MASK;
+	ipg_podf = reg >> MXC_CCM_CBCDR_IPG_PODF_OFFSET;
+
+	return get_ahb_clk() / (ipg_podf + 1);
+}
+
+static u32 get_ipg_per_clk(void)
+{
+	u32 reg, perclk_podf;
+
+	reg = __raw_readl(&imx_ccm->cscmr1);
+	if (is_mx6sll() || is_mx6sl() || is_mx6sx() ||
+	    is_mx6dqp() || is_mx6ul() || is_mx6ull()) {
+		if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
+			return MXC_HCLK; /* OSC 24Mhz */
+	}
+
+	perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;
+
+	return get_ipg_clk() / (perclk_podf + 1);
+}
+
+static u32 get_uart_clk(void)
+{
+	u32 reg, uart_podf;
+	u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
+	reg = __raw_readl(&imx_ccm->cscdr1);
+
+	if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul() ||
+	    is_mx6sll() || is_mx6ull()) {
+		if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
+			freq = MXC_HCLK;
+	}
+
+	reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
+	uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
+
+	return freq / (uart_podf + 1);
+}
+
+static u32 get_cspi_clk(void)
+{
+	u32 reg, cspi_podf;
+
+	reg = __raw_readl(&imx_ccm->cscdr2);
+	cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
+		     MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
+
+	if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul() ||
+	    is_mx6sll() || is_mx6ull()) {
+		if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
+			return MXC_HCLK / (cspi_podf + 1);
+	}
+
+	return	decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
+}
+
+static u32 get_axi_clk(void)
+{
+	u32 root_freq, axi_podf;
+	u32 cbcdr =  __raw_readl(&imx_ccm->cbcdr);
+
+	axi_podf = cbcdr & MXC_CCM_CBCDR_AXI_PODF_MASK;
+	axi_podf >>= MXC_CCM_CBCDR_AXI_PODF_OFFSET;
+
+	if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
+		if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
+			root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1);
+		else
+			root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
+	} else
+		root_freq = get_periph_clk();
+
+	return  root_freq / (axi_podf + 1);
+}
+
+static u32 get_emi_slow_clk(void)
+{
+	u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0;
+
+	cscmr1 =  __raw_readl(&imx_ccm->cscmr1);
+	emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK;
+	emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET;
+	emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
+	emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET;
+
+	switch (emi_clk_sel) {
+	case 0:
+		root_freq = get_axi_clk();
+		break;
+	case 1:
+		root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
+		break;
+	case 2:
+		root_freq =  mxc_get_pll_pfd(PLL_BUS, 2);
+		break;
+	case 3:
+		root_freq =  mxc_get_pll_pfd(PLL_BUS, 0);
+		break;
+	}
+
+	return root_freq / (emi_slow_podf + 1);
+}
+
+static u32 get_mmdc_ch0_clk(void)
+{
+	u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
+	u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
+
+	u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
+
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() ||
+	    is_mx6sll()) {
+		podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
+			MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
+		if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
+			per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >>
+				MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET;
+			if (is_mx6sl()) {
+				if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
+					freq = MXC_HCLK;
+				else
+					freq = decode_pll(PLL_USBOTG, MXC_HCLK);
+			} else {
+				if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
+					freq = decode_pll(PLL_BUS, MXC_HCLK);
+				else
+					freq = decode_pll(PLL_USBOTG, MXC_HCLK);
+			}
+		} else {
+			per2_clk2_podf = 0;
+			switch ((cbcmr &
+				MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
+				MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
+			case 0:
+				freq = decode_pll(PLL_BUS, MXC_HCLK);
+				break;
+			case 1:
+				freq = mxc_get_pll_pfd(PLL_BUS, 2);
+				break;
+			case 2:
+				freq = mxc_get_pll_pfd(PLL_BUS, 0);
+				break;
+			case 3:
+				if (is_mx6sl()) {
+					freq = mxc_get_pll_pfd(PLL_BUS, 2) >> 1;
+					break;
+				}
+
+				pmu_misc2_audio_div = PMU_MISC2_AUDIO_DIV(__raw_readl(&imx_ccm->pmu_misc2));
+				switch (pmu_misc2_audio_div) {
+				case 0:
+				case 2:
+					pmu_misc2_audio_div = 1;
+					break;
+				case 1:
+					pmu_misc2_audio_div = 2;
+					break;
+				case 3:
+					pmu_misc2_audio_div = 4;
+					break;
+				}
+				freq = decode_pll(PLL_AUDIO, MXC_HCLK) /
+					pmu_misc2_audio_div;
+				break;
+			}
+		}
+		return freq / (podf + 1) / (per2_clk2_podf + 1);
+	} else {
+		podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
+			MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
+		return get_periph_clk() / (podf + 1);
+	}
+}
+
+#if defined(CONFIG_VIDEO_MXS)
+static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom,
+			    u32 post_div)
+{
+	u32 reg = 0;
+	ulong start;
+
+	debug("pll5 div = %d, num = %d, denom = %d\n",
+	      pll_div, pll_num, pll_denom);
+
+	/* Power up PLL5 video */
+	writel(BM_ANADIG_PLL_VIDEO_POWERDOWN |
+	       BM_ANADIG_PLL_VIDEO_BYPASS |
+	       BM_ANADIG_PLL_VIDEO_DIV_SELECT |
+	       BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
+	       &imx_ccm->analog_pll_video_clr);
+
+	/* Set div, num and denom */
+	switch (post_div) {
+	case 1:
+		writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
+		       BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x2),
+		       &imx_ccm->analog_pll_video_set);
+		break;
+	case 2:
+		writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
+		       BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x1),
+		       &imx_ccm->analog_pll_video_set);
+		break;
+	case 4:
+		writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
+		       BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x0),
+		       &imx_ccm->analog_pll_video_set);
+		break;
+	default:
+		puts("Wrong test_div!\n");
+		return -EINVAL;
+	}
+
+	writel(BF_ANADIG_PLL_VIDEO_NUM_A(pll_num),
+	       &imx_ccm->analog_pll_video_num);
+	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(pll_denom),
+	       &imx_ccm->analog_pll_video_denom);
+
+	/* Wait PLL5 lock */
+	start = get_timer(0);	/* Get current timestamp */
+
+	do {
+		reg = readl(&imx_ccm->analog_pll_video);
+		if (reg & BM_ANADIG_PLL_VIDEO_LOCK) {
+			/* Enable PLL out */
+			writel(BM_ANADIG_PLL_VIDEO_ENABLE,
+			       &imx_ccm->analog_pll_video_set);
+			return 0;
+		}
+	} while (get_timer(0) < (start + 10)); /* Wait 10ms */
+
+	puts("Lock PLL5 timeout\n");
+
+	return -ETIME;
+}
+
+/*
+ * 24M--> PLL_VIDEO -> LCDIFx_PRED -> LCDIFx_PODF -> LCD
+ *
+ * 'freq' using KHz as unit, see driver/video/mxsfb.c.
+ */
+void mxs_set_lcdclk(u32 base_addr, u32 freq)
+{
+	u32 reg = 0;
+	u32 hck = MXC_HCLK / 1000;
+	/* DIV_SELECT ranges from 27 to 54 */
+	u32 min = hck * 27;
+	u32 max = hck * 54;
+	u32 temp, best = 0;
+	u32 i, j, max_pred = 8, max_postd = 8, pred = 1, postd = 1;
+	u32 pll_div, pll_num, pll_denom, post_div = 1;
+
+	debug("mxs_set_lcdclk, freq = %dKHz\n", freq);
+
+	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() &&
+	    !is_mx6sll()) {
+		debug("This chip not support lcd!\n");
+		return;
+	}
+
+	if (!is_mx6sl()) {
+		if (base_addr == LCDIF1_BASE_ADDR) {
+			reg = readl(&imx_ccm->cscdr2);
+			/* Can't change clocks when clock not from pre-mux */
+			if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
+				return;
+		}
+	}
+
+	if (is_mx6sx()) {
+		reg = readl(&imx_ccm->cscdr2);
+		/* Can't change clocks when clock not from pre-mux */
+		if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0)
+			return;
+	}
+
+	temp = freq * max_pred * max_postd;
+	if (temp < min) {
+		/*
+		 * Register: PLL_VIDEO
+		 * Bit Field: POST_DIV_SELECT
+		 * 00 — Divide by 4.
+		 * 01 — Divide by 2.
+		 * 10 — Divide by 1.
+		 * 11 — Reserved
+		 * No need to check post_div(1)
+		 */
+		for (post_div = 2; post_div <= 4; post_div <<= 1) {
+			if ((temp * post_div) > min) {
+				freq *= post_div;
+				break;
+			}
+		}
+
+		if (post_div > 4) {
+			printf("Fail to set rate to %dkhz", freq);
+			return;
+		}
+	}
+
+	/* Choose the best pred and postd to match freq for lcd */
+	for (i = 1; i <= max_pred; i++) {
+		for (j = 1; j <= max_postd; j++) {
+			temp = freq * i * j;
+			if (temp > max || temp < min)
+				continue;
+			if (best == 0 || temp < best) {
+				best = temp;
+				pred = i;
+				postd = j;
+			}
+		}
+	}
+
+	if (best == 0) {
+		printf("Fail to set rate to %dKHz", freq);
+		return;
+	}
+
+	debug("best %d, pred = %d, postd = %d\n", best, pred, postd);
+
+	pll_div = best / hck;
+	pll_denom = 1000000;
+	pll_num = (best - hck * pll_div) * pll_denom / hck;
+
+	/*
+	 *                                  pll_num
+	 *             (24MHz * (pll_div + --------- ))
+	 *                                 pll_denom
+	 *freq KHz =  --------------------------------
+	 *             post_div * pred * postd * 1000
+	 */
+
+	if (base_addr == LCDIF1_BASE_ADDR) {
+		if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
+			return;
+
+		enable_lcdif_clock(base_addr, 0);
+		if (!is_mx6sl()) {
+			/* Select pre-lcd clock to PLL5 and set pre divider */
+			clrsetbits_le32(&imx_ccm->cscdr2,
+					MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
+					MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
+					(0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
+					((pred - 1) <<
+					 MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));
+
+			/* Set the post divider */
+			clrsetbits_le32(&imx_ccm->cbcmr,
+					MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
+					((postd - 1) <<
+					MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
+		} else {
+			/* Select pre-lcd clock to PLL5 and set pre divider */
+			clrsetbits_le32(&imx_ccm->cscdr2,
+					MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK |
+					MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK,
+					(0x2 << MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET) |
+					((pred - 1) <<
+					 MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET));
+
+			/* Set the post divider */
+			clrsetbits_le32(&imx_ccm->cscmr1,
+					MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK,
+					(((postd - 1)^0x6) <<
+					 MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET));
+		}
+
+		enable_lcdif_clock(base_addr, 1);
+	} else if (is_mx6sx()) {
+		/* Setting LCDIF2 for i.MX6SX */
+		if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
+			return;
+
+		enable_lcdif_clock(base_addr, 0);
+		/* Select pre-lcd clock to PLL5 and set pre divider */
+		clrsetbits_le32(&imx_ccm->cscdr2,
+				MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK |
+				MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK,
+				(0x2 << MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_OFFSET) |
+				((pred - 1) <<
+				 MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET));
+
+		/* Set the post divider */
+		clrsetbits_le32(&imx_ccm->cscmr1,
+				MXC_CCM_CSCMR1_LCDIF2_PODF_MASK,
+				((postd - 1) <<
+				 MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET));
+
+		enable_lcdif_clock(base_addr, 1);
+	}
+}
+
+int enable_lcdif_clock(u32 base_addr, bool enable)
+{
+	u32 reg = 0;
+	u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;
+
+	if (is_mx6sx()) {
+		if ((base_addr != LCDIF1_BASE_ADDR) &&
+		    (base_addr != LCDIF2_BASE_ADDR)) {
+			puts("Wrong LCD interface!\n");
+			return -EINVAL;
+		}
+		/* Set to pre-mux clock at default */
+		lcdif_clk_sel_mask = (base_addr == LCDIF2_BASE_ADDR) ?
+			MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK :
+			MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
+		lcdif_ccgr3_mask = (base_addr == LCDIF2_BASE_ADDR) ?
+			(MXC_CCM_CCGR3_LCDIF2_PIX_MASK |
+			 MXC_CCM_CCGR3_DISP_AXI_MASK) :
+			(MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
+			 MXC_CCM_CCGR3_DISP_AXI_MASK);
+	} else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
+		if (base_addr != LCDIF1_BASE_ADDR) {
+			puts("Wrong LCD interface!\n");
+			return -EINVAL;
+		}
+		/* Set to pre-mux clock at default */
+		lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
+		lcdif_ccgr3_mask =  MXC_CCM_CCGR3_LCDIF1_PIX_MASK;
+	} else if (is_mx6sl()) {
+		if (base_addr != LCDIF1_BASE_ADDR) {
+			puts("Wrong LCD interface!\n");
+			return -EINVAL;
+		}
+
+		reg = readl(&imx_ccm->CCGR3);
+		reg &= ~(MXC_CCM_CCGR3_LCDIF_AXI_MASK |
+			 MXC_CCM_CCGR3_LCDIF_PIX_MASK);
+		writel(reg, &imx_ccm->CCGR3);
+
+		if (enable) {
+			reg = readl(&imx_ccm->cscdr3);
+			reg &= ~MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK;
+			reg |= 1 << MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET;
+			writel(reg, &imx_ccm->cscdr3);
+
+			reg = readl(&imx_ccm->CCGR3);
+			reg |= MXC_CCM_CCGR3_LCDIF_AXI_MASK |
+				MXC_CCM_CCGR3_LCDIF_PIX_MASK;
+			writel(reg, &imx_ccm->CCGR3);
+		}
+
+		return 0;
+	} else {
+		return 0;
+	}
+
+	/* Gate LCDIF clock first */
+	reg = readl(&imx_ccm->CCGR3);
+	reg &= ~lcdif_ccgr3_mask;
+	writel(reg, &imx_ccm->CCGR3);
+
+	reg = readl(&imx_ccm->CCGR2);
+	reg &= ~MXC_CCM_CCGR2_LCD_MASK;
+	writel(reg, &imx_ccm->CCGR2);
+
+	if (enable) {
+		/* Select pre-mux */
+		reg = readl(&imx_ccm->cscdr2);
+		reg &= ~lcdif_clk_sel_mask;
+		writel(reg, &imx_ccm->cscdr2);
+
+		/* Enable the LCDIF pix clock */
+		reg = readl(&imx_ccm->CCGR3);
+		reg |= lcdif_ccgr3_mask;
+		writel(reg, &imx_ccm->CCGR3);
+
+		reg = readl(&imx_ccm->CCGR2);
+		reg |= MXC_CCM_CCGR2_LCD_MASK;
+		writel(reg, &imx_ccm->CCGR2);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_QSPI
+/* qspi_num can be from 0 - 1 */
+void enable_qspi_clk(int qspi_num)
+{
+	u32 reg = 0;
+	/* Enable QuadSPI clock */
+	switch (qspi_num) {
+	case 0:
+		/* disable the clock gate */
+		clrbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
+
+		/* set 50M  : (50 = 396 / 2 / 4) */
+		reg = readl(&imx_ccm->cscmr1);
+		reg &= ~(MXC_CCM_CSCMR1_QSPI1_PODF_MASK |
+			 MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK);
+		reg |= ((1 << MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET) |
+			(2 << MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET));
+		writel(reg, &imx_ccm->cscmr1);
+
+		/* enable the clock gate */
+		setbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
+		break;
+	case 1:
+		/*
+		 * disable the clock gate
+		 * QSPI2 and GPMI_BCH_INPUT_GPMI_IO share the same clock gate,
+		 * disable both of them.
+		 */
+		clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
+			     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
+
+		/* set 50M  : (50 = 396 / 2 / 4) */
+		reg = readl(&imx_ccm->cs2cdr);
+		reg &= ~(MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
+			 MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
+			 MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK);
+		reg |= (MXC_CCM_CS2CDR_QSPI2_CLK_PRED(0x1) |
+			MXC_CCM_CS2CDR_QSPI2_CLK_SEL(0x3));
+		writel(reg, &imx_ccm->cs2cdr);
+
+		/*enable the clock gate*/
+		setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
+			     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
+		break;
+	default:
+		break;
+	}
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int enable_fec_anatop_clock(int fec_id, enum enet_freq freq)
+{
+	u32 reg = 0;
+	s32 timeout = 100000;
+
+	struct anatop_regs __iomem *anatop =
+		(struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+
+	if (freq < ENET_25MHZ || freq > ENET_125MHZ)
+		return -EINVAL;
+
+	reg = readl(&anatop->pll_enet);
+
+	if (fec_id == 0) {
+		reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT;
+		reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq);
+	} else if (fec_id == 1) {
+		/* Only i.MX6SX/UL support ENET2 */
+		if (!(is_mx6sx() || is_mx6ul() || is_mx6ull()))
+			return -EINVAL;
+		reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT;
+		reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq);
+	} else {
+		return -EINVAL;
+	}
+
+	if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) ||
+	    (!(reg & BM_ANADIG_PLL_ENET_LOCK))) {
+		reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN;
+		writel(reg, &anatop->pll_enet);
+		while (timeout--) {
+			if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK)
+				break;
+		}
+		if (timeout < 0)
+			return -ETIMEDOUT;
+	}
+
+	/* Enable FEC clock */
+	if (fec_id == 0)
+		reg |= BM_ANADIG_PLL_ENET_ENABLE;
+	else
+		reg |= BM_ANADIG_PLL_ENET2_ENABLE;
+	reg &= ~BM_ANADIG_PLL_ENET_BYPASS;
+	writel(reg, &anatop->pll_enet);
+
+#ifdef CONFIG_MX6SX
+	/* Disable enet system clcok before switching clock parent */
+	reg = readl(&imx_ccm->CCGR3);
+	reg &= ~MXC_CCM_CCGR3_ENET_MASK;
+	writel(reg, &imx_ccm->CCGR3);
+
+	/*
+	 * Set enet ahb clock to 200MHz
+	 * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
+	 */
+	reg = readl(&imx_ccm->chsccdr);
+	reg &= ~(MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK
+		 | MXC_CCM_CHSCCDR_ENET_PODF_MASK
+		 | MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK);
+	/* PLL2 PFD2 */
+	reg |= (4 << MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET);
+	/* Div = 2*/
+	reg |= (1 << MXC_CCM_CHSCCDR_ENET_PODF_OFFSET);
+	reg |= (0 << MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET);
+	writel(reg, &imx_ccm->chsccdr);
+
+	/* Enable enet system clock */
+	reg = readl(&imx_ccm->CCGR3);
+	reg |= MXC_CCM_CCGR3_ENET_MASK;
+	writel(reg, &imx_ccm->CCGR3);
+#endif
+	return 0;
+}
+#endif
+
+static u32 get_usdhc_clk(u32 port)
+{
+	u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0;
+	u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1);
+	u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1);
+
+	if (is_mx6ul() || is_mx6ull()) {
+		if (port > 1)
+			return 0;
+	}
+
+	if (is_mx6sll()) {
+		if (port > 2)
+			return 0;
+	}
+
+	switch (port) {
+	case 0:
+		usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >>
+					MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET;
+		clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC1_CLK_SEL;
+
+		break;
+	case 1:
+		usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC2_PODF_MASK) >>
+					MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET;
+		clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC2_CLK_SEL;
+
+		break;
+	case 2:
+		usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC3_PODF_MASK) >>
+					MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET;
+		clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC3_CLK_SEL;
+
+		break;
+	case 3:
+		usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC4_PODF_MASK) >>
+					MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET;
+		clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC4_CLK_SEL;
+
+		break;
+	default:
+		break;
+	}
+
+	if (clk_sel)
+		root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
+	else
+		root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
+
+	return root_freq / (usdhc_podf + 1);
+}
+
+u32 imx_get_uartclk(void)
+{
+	return get_uart_clk();
+}
+
+u32 imx_get_fecclk(void)
+{
+	return mxc_get_clock(MXC_IPG_CLK);
+}
+
+#if defined(CONFIG_SATA) || defined(CONFIG_PCIE_IMX)
+static int enable_enet_pll(uint32_t en)
+{
+	struct mxc_ccm_reg *const imx_ccm
+		= (struct mxc_ccm_reg *) CCM_BASE_ADDR;
+	s32 timeout = 100000;
+	u32 reg = 0;
+
+	/* Enable PLLs */
+	reg = readl(&imx_ccm->analog_pll_enet);
+	reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN;
+	writel(reg, &imx_ccm->analog_pll_enet);
+	reg |= BM_ANADIG_PLL_SYS_ENABLE;
+	while (timeout--) {
+		if (readl(&imx_ccm->analog_pll_enet) & BM_ANADIG_PLL_SYS_LOCK)
+			break;
+	}
+	if (timeout <= 0)
+		return -EIO;
+	reg &= ~BM_ANADIG_PLL_SYS_BYPASS;
+	writel(reg, &imx_ccm->analog_pll_enet);
+	reg |= en;
+	writel(reg, &imx_ccm->analog_pll_enet);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SATA
+static void ungate_sata_clock(void)
+{
+	struct mxc_ccm_reg *const imx_ccm =
+		(struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	/* Enable SATA clock. */
+	setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
+}
+
+int enable_sata_clock(void)
+{
+	ungate_sata_clock();
+	return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA);
+}
+
+void disable_sata_clock(void)
+{
+	struct mxc_ccm_reg *const imx_ccm =
+		(struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	clrbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
+}
+#endif
+
+#ifdef CONFIG_PCIE_IMX
+static void ungate_pcie_clock(void)
+{
+	struct mxc_ccm_reg *const imx_ccm =
+		(struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	/* Enable PCIe clock. */
+	setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK);
+}
+
+int enable_pcie_clock(void)
+{
+	struct anatop_regs *anatop_regs =
+		(struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 lvds1_clk_sel;
+
+	/*
+	 * Here be dragons!
+	 *
+	 * The register ANATOP_MISC1 is not documented in the Freescale
+	 * MX6RM. The register that is mapped in the ANATOP space and
+	 * marked as ANATOP_MISC1 is actually documented in the PMU section
+	 * of the datasheet as PMU_MISC1.
+	 *
+	 * Switch LVDS clock source to SATA (0xb) on mx6q/dl or PCI (0xa) on
+	 * mx6sx, disable clock INPUT and enable clock OUTPUT. This is important
+	 * for PCI express link that is clocked from the i.MX6.
+	 */
+#define ANADIG_ANA_MISC1_LVDSCLK1_IBEN		(1 << 12)
+#define ANADIG_ANA_MISC1_LVDSCLK1_OBEN		(1 << 10)
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK	0x0000001F
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF	0xa
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF	0xb
+
+	if (is_mx6sx())
+		lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
+	else
+		lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;
+
+	clrsetbits_le32(&anatop_regs->ana_misc1,
+			ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
+			ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
+			ANADIG_ANA_MISC1_LVDSCLK1_OBEN | lvds1_clk_sel);
+
+	/* PCIe reference clock sourced from AXI. */
+	clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
+
+	/* Party time! Ungate the clock to the PCIe. */
+#ifdef CONFIG_SATA
+	ungate_sata_clock();
+#endif
+	ungate_pcie_clock();
+
+	return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA |
+			       BM_ANADIG_PLL_ENET_ENABLE_PCIE);
+}
+#endif
+
+#ifdef CONFIG_IMX_HAB
+void hab_caam_clock_enable(unsigned char enable)
+{
+	u32 reg;
+
+	if (is_mx6ull() || is_mx6sll()) {
+		/* CG5, DCP clock */
+		reg = __raw_readl(&imx_ccm->CCGR0);
+		if (enable)
+			reg |= MXC_CCM_CCGR0_DCP_CLK_MASK;
+		else
+			reg &= ~MXC_CCM_CCGR0_DCP_CLK_MASK;
+		__raw_writel(reg, &imx_ccm->CCGR0);
+	} else {
+		/* CG4 ~ CG6, CAAM clocks */
+		reg = __raw_readl(&imx_ccm->CCGR0);
+		if (enable)
+			reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
+				MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
+				MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
+		else
+			reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
+				MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
+				MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
+		__raw_writel(reg, &imx_ccm->CCGR0);
+	}
+
+	/* EMI slow clk */
+	reg = __raw_readl(&imx_ccm->CCGR6);
+	if (enable)
+		reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
+	else
+		reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
+	__raw_writel(reg, &imx_ccm->CCGR6);
+}
+#endif
+
+static void enable_pll3(void)
+{
+	struct anatop_regs __iomem *anatop =
+		(struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+
+	/* make sure pll3 is enabled */
+	if ((readl(&anatop->usb1_pll_480_ctrl) &
+			BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) {
+		/* enable pll's power */
+		writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER,
+		       &anatop->usb1_pll_480_ctrl_set);
+		writel(0x80, &anatop->ana_misc2_clr);
+		/* wait for pll lock */
+		while ((readl(&anatop->usb1_pll_480_ctrl) &
+			BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0)
+			;
+		/* disable bypass */
+		writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS,
+		       &anatop->usb1_pll_480_ctrl_clr);
+		/* enable pll output */
+		writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE,
+		       &anatop->usb1_pll_480_ctrl_set);
+	}
+}
+
+void enable_thermal_clk(void)
+{
+	enable_pll3();
+}
+
+#ifdef CONFIG_MTD_NOR_FLASH
+void enable_eim_clk(unsigned char enable)
+{
+	u32 reg;
+
+	reg = __raw_readl(&imx_ccm->CCGR6);
+	if (enable)
+		reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
+	else
+		reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
+	__raw_writel(reg, &imx_ccm->CCGR6);
+}
+#endif
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return get_mcu_main_clk();
+	case MXC_PER_CLK:
+		return get_periph_clk();
+	case MXC_AHB_CLK:
+		return get_ahb_clk();
+	case MXC_IPG_CLK:
+		return get_ipg_clk();
+	case MXC_IPG_PERCLK:
+	case MXC_I2C_CLK:
+		return get_ipg_per_clk();
+	case MXC_UART_CLK:
+		return get_uart_clk();
+	case MXC_CSPI_CLK:
+		return get_cspi_clk();
+	case MXC_AXI_CLK:
+		return get_axi_clk();
+	case MXC_EMI_SLOW_CLK:
+		return get_emi_slow_clk();
+	case MXC_DDR_CLK:
+		return get_mmdc_ch0_clk();
+	case MXC_ESDHC_CLK:
+		return get_usdhc_clk(0);
+	case MXC_ESDHC2_CLK:
+		return get_usdhc_clk(1);
+	case MXC_ESDHC3_CLK:
+		return get_usdhc_clk(2);
+	case MXC_ESDHC4_CLK:
+		return get_usdhc_clk(3);
+	case MXC_SATA_CLK:
+		return get_ahb_clk();
+	default:
+		printf("Unsupported MXC CLK: %d\n", clk);
+		break;
+	}
+
+	return 0;
+}
+
+#ifndef CONFIG_MX6SX
+void enable_ipu_clock(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_MASK);
+
+	if (is_mx6dqp()) {
+		setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
+		setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
+	}
+}
+
+void disable_ipu_clock(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	clrbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_MASK);
+
+	if (is_mx6dqp()) {
+		clrbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
+		clrbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
+	}
+}
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Dump some core clockes.
+ */
+int do_mx6_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	u32 freq;
+	freq = decode_pll(PLL_SYS, MXC_HCLK);
+	printf("PLL_SYS    %8d MHz\n", freq / 1000000);
+	freq = decode_pll(PLL_BUS, MXC_HCLK);
+	printf("PLL_BUS    %8d MHz\n", freq / 1000000);
+	freq = decode_pll(PLL_USBOTG, MXC_HCLK);
+	printf("PLL_OTG    %8d MHz\n", freq / 1000000);
+	freq = decode_pll(PLL_ENET, MXC_HCLK);
+	printf("PLL_NET    %8d MHz\n", freq / 1000000);
+
+	printf("\n");
+	printf("ARM        %8d kHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000);
+	printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+	printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
+#ifdef CONFIG_MXC_SPI
+	printf("CSPI       %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
+#endif
+	printf("AHB        %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+	printf("AXI        %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
+	printf("DDR        %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
+	printf("USDHC1     %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
+	printf("USDHC2     %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
+	printf("USDHC3     %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
+	printf("USDHC4     %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000);
+	printf("EMI SLOW   %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000);
+	printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
+
+	return 0;
+}
+
+#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \
+	defined(CONFIG_MX6S) || defined(CONFIG_MX6QDL)
+static void disable_ldb_di_clock_sources(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	int reg;
+
+	/* Make sure PFDs are disabled at boot. */
+	reg = readl(&mxc_ccm->analog_pfd_528);
+	/* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
+	if (is_mx6sdl())
+		reg |= 0x80008080;
+	else
+		reg |= 0x80808080;
+	writel(reg, &mxc_ccm->analog_pfd_528);
+
+	/* Disable PLL3 PFDs */
+	reg = readl(&mxc_ccm->analog_pfd_480);
+	reg |= 0x80808080;
+	writel(reg, &mxc_ccm->analog_pfd_480);
+
+	/* Disable PLL5 */
+	reg = readl(&mxc_ccm->analog_pll_video);
+	reg &= ~(1 << 13);
+	writel(reg, &mxc_ccm->analog_pll_video);
+}
+
+static void enable_ldb_di_clock_sources(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	int reg;
+
+	reg = readl(&mxc_ccm->analog_pfd_528);
+	if (is_mx6sdl())
+		reg &= ~(0x80008080);
+	else
+		reg &= ~(0x80808080);
+	writel(reg, &mxc_ccm->analog_pfd_528);
+
+	reg = readl(&mxc_ccm->analog_pfd_480);
+	reg &= ~(0x80808080);
+	writel(reg, &mxc_ccm->analog_pfd_480);
+}
+
+/*
+ * Try call this function as early in the boot process as possible since the
+ * function temporarily disables PLL2 PFD's, PLL3 PFD's and PLL5.
+ */
+void select_ldb_di_clock_source(enum ldb_di_clock clk)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	int reg;
+
+	/*
+	 * Need to follow a strict procedure when changing the LDB
+	 * clock, else we can introduce a glitch. Things to keep in
+	 * mind:
+	 * 1. The current and new parent clocks must be disabled.
+	 * 2. The default clock for ldb_dio_clk is mmdc_ch1 which has
+	 * no CG bit.
+	 * 3. In the RTL implementation of the LDB_DI_CLK_SEL mux
+	 * the top four options are in one mux and the PLL3 option along
+	 * with another option is in the second mux. There is third mux
+	 * used to decide between the first and second mux.
+	 * The code below switches the parent to the bottom mux first
+	 * and then manipulates the top mux. This ensures that no glitch
+	 * will enter the divider.
+	 *
+	 * Need to disable MMDC_CH1 clock manually as there is no CG bit
+	 * for this clock. The only way to disable this clock is to move
+	 * it to pll3_sw_clk and then to disable pll3_sw_clk
+	 * Make sure periph2_clk2_sel is set to pll3_sw_clk
+	 */
+
+	/* Disable all ldb_di clock parents */
+	disable_ldb_di_clock_sources();
+
+	/* Set MMDC_CH1 mask bit */
+	reg = readl(&mxc_ccm->ccdr);
+	reg |= MXC_CCM_CCDR_MMDC_CH1_HS_MASK;
+	writel(reg, &mxc_ccm->ccdr);
+
+	/* Set periph2_clk2_sel to be sourced from PLL3_sw_clk */
+	reg = readl(&mxc_ccm->cbcmr);
+	reg &= ~MXC_CCM_CBCMR_PERIPH2_CLK2_SEL;
+	writel(reg, &mxc_ccm->cbcmr);
+
+	/*
+	 * Set the periph2_clk_sel to the top mux so that
+	 * mmdc_ch1 is from pll3_sw_clk.
+	 */
+	reg = readl(&mxc_ccm->cbcdr);
+	reg |= MXC_CCM_CBCDR_PERIPH2_CLK_SEL;
+	writel(reg, &mxc_ccm->cbcdr);
+
+	/* Wait for the clock switch */
+	while (readl(&mxc_ccm->cdhipr))
+		;
+	/* Disable pll3_sw_clk by selecting bypass clock source */
+	reg = readl(&mxc_ccm->ccsr);
+	reg |= MXC_CCM_CCSR_PLL3_SW_CLK_SEL;
+	writel(reg, &mxc_ccm->ccsr);
+
+	/* Set the ldb_di0_clk and ldb_di1_clk to 111b */
+	reg = readl(&mxc_ccm->cs2cdr);
+	reg |= ((7 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
+	      | (7 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
+	writel(reg, &mxc_ccm->cs2cdr);
+
+	/* Set the ldb_di0_clk and ldb_di1_clk to 100b */
+	reg = readl(&mxc_ccm->cs2cdr);
+	reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK
+	      | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
+	reg |= ((4 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
+	      | (4 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
+	writel(reg, &mxc_ccm->cs2cdr);
+
+	/* Set the ldb_di0_clk and ldb_di1_clk to desired source */
+	reg = readl(&mxc_ccm->cs2cdr);
+	reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK
+	      | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
+	reg |= ((clk << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
+	      | (clk << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
+	writel(reg, &mxc_ccm->cs2cdr);
+
+	/* Unbypass pll3_sw_clk */
+	reg = readl(&mxc_ccm->ccsr);
+	reg &= ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL;
+	writel(reg, &mxc_ccm->ccsr);
+
+	/*
+	 * Set the periph2_clk_sel back to the bottom mux so that
+	 * mmdc_ch1 is from its original parent.
+	 */
+	reg = readl(&mxc_ccm->cbcdr);
+	reg &= ~MXC_CCM_CBCDR_PERIPH2_CLK_SEL;
+	writel(reg, &mxc_ccm->cbcdr);
+
+	/* Wait for the clock switch */
+	while (readl(&mxc_ccm->cdhipr))
+		;
+	/* Clear MMDC_CH1 mask bit */
+	reg = readl(&mxc_ccm->ccdr);
+	reg &= ~MXC_CCM_CCDR_MMDC_CH1_HS_MASK;
+	writel(reg, &mxc_ccm->ccdr);
+
+	enable_ldb_di_clock_sources();
+}
+#endif
+
+/***************************************************/
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx6_showclocks,
+	"display clocks",
+	""
+);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/ddr.c b/roms/u-boot/arch/arm/mach-imx/mx6/ddr.c
new file mode 100644
index 000000000..f872bfdab
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/ddr.c
@@ -0,0 +1,1684 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <log.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/types.h>
+#include <wait_bit.h>
+
+#if defined(CONFIG_MX6_DDRCAL)
+static void reset_read_data_fifos(void)
+{
+	struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+
+	/* Reset data FIFOs twice. */
+	setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
+	wait_for_bit_le32(&mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
+
+	setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
+	wait_for_bit_le32(&mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
+}
+
+static void precharge_all(const bool cs0_enable, const bool cs1_enable)
+{
+	struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+
+	/*
+	 * Issue the Precharge-All command to the DDR device for both
+	 * chip selects. Note, CON_REQ bit should also remain set. If
+	 * only using one chip select, then precharge only the desired
+	 * chip select.
+	 */
+	if (cs0_enable) { /* CS0 */
+		writel(0x04008050, &mmdc0->mdscr);
+		wait_for_bit_le32(&mmdc0->mdscr, 1 << 14, 1, 100, 0);
+	}
+
+	if (cs1_enable) { /* CS1 */
+		writel(0x04008058, &mmdc0->mdscr);
+		wait_for_bit_le32(&mmdc0->mdscr, 1 << 14, 1, 100, 0);
+	}
+}
+
+static void force_delay_measurement(int bus_size)
+{
+	struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+	struct mmdc_p_regs *mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+
+	writel(0x800, &mmdc0->mpmur0);
+	if (bus_size == 0x2)
+		writel(0x800, &mmdc1->mpmur0);
+}
+
+static void modify_dg_result(u32 *reg_st0, u32 *reg_st1, u32 *reg_ctrl)
+{
+	u32 dg_tmp_val, dg_dl_abs_offset, dg_hc_del, val_ctrl;
+
+	/*
+	 * DQS gating absolute offset should be modified from reflecting
+	 * (HW_DG_LOWx + HW_DG_UPx)/2 to reflecting (HW_DG_UPx - 0x80)
+	 */
+
+	val_ctrl = readl(reg_ctrl);
+	val_ctrl &= 0xf0000000;
+
+	dg_tmp_val = ((readl(reg_st0) & 0x07ff0000) >> 16) - 0xc0;
+	dg_dl_abs_offset = dg_tmp_val & 0x7f;
+	dg_hc_del = (dg_tmp_val & 0x780) << 1;
+
+	val_ctrl |= dg_dl_abs_offset + dg_hc_del;
+
+	dg_tmp_val = ((readl(reg_st1) & 0x07ff0000) >> 16) - 0xc0;
+	dg_dl_abs_offset = dg_tmp_val & 0x7f;
+	dg_hc_del = (dg_tmp_val & 0x780) << 1;
+
+	val_ctrl |= (dg_dl_abs_offset + dg_hc_del) << 16;
+
+	writel(val_ctrl, reg_ctrl);
+}
+
+static void correct_mpwldectr_result(void *reg)
+{
+	/* Limit is 200/256 of CK, which is WL_HC_DELx | 0x48. */
+	const unsigned int limit = 0x148;
+	u32 val = readl(reg);
+	u32 old = val;
+
+	if ((val & 0x17f) > limit)
+		val &= 0xffff << 16;
+
+	if (((val >> 16) & 0x17f) > limit)
+		val &= 0xffff;
+
+	if (old != val)
+		writel(val, reg);
+}
+
+int mmdc_do_write_level_calibration(struct mx6_ddr_sysinfo const *sysinfo)
+{
+	struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+	struct mmdc_p_regs *mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+	u32 esdmisc_val, zq_val;
+	u32 errors = 0;
+	u32 ldectrl[4] = {0};
+	u32 ddr_mr1 = 0x4;
+	u32 rwalat_max;
+
+	/*
+	 * Stash old values in case calibration fails,
+	 * we need to restore them
+	 */
+	ldectrl[0] = readl(&mmdc0->mpwldectrl0);
+	ldectrl[1] = readl(&mmdc0->mpwldectrl1);
+	if (sysinfo->dsize == 2) {
+		ldectrl[2] = readl(&mmdc1->mpwldectrl0);
+		ldectrl[3] = readl(&mmdc1->mpwldectrl1);
+	}
+
+	/* disable DDR logic power down timer */
+	clrbits_le32(&mmdc0->mdpdc, 0xff00);
+
+	/* disable Adopt power down timer */
+	setbits_le32(&mmdc0->mapsr, 0x1);
+
+	debug("Starting write leveling calibration.\n");
+
+	/*
+	 * 2. disable auto refresh and ZQ calibration
+	 * before proceeding with Write Leveling calibration
+	 */
+	esdmisc_val = readl(&mmdc0->mdref);
+	writel(0x0000C000, &mmdc0->mdref);
+	zq_val = readl(&mmdc0->mpzqhwctrl);
+	writel(zq_val & ~0x3, &mmdc0->mpzqhwctrl);
+
+	/* 3. increase walat and ralat to maximum */
+	rwalat_max = (1 << 6) | (1 << 7) | (1 << 8) | (1 << 16) | (1 << 17);
+	setbits_le32(&mmdc0->mdmisc, rwalat_max);
+	if (sysinfo->dsize == 2)
+		setbits_le32(&mmdc1->mdmisc, rwalat_max);
+	/*
+	 * 4 & 5. Configure the external DDR device to enter write-leveling
+	 * mode through Load Mode Register command.
+	 * Register setting:
+	 * Bits[31:16] MR1 value (0x0080 write leveling enable)
+	 * Bit[9] set WL_EN to enable MMDC DQS output
+	 * Bits[6:4] set CMD bits for Load Mode Register programming
+	 * Bits[2:0] set CMD_BA to 0x1 for DDR MR1 programming
+	 */
+	writel(0x00808231, &mmdc0->mdscr);
+
+	/* 6. Activate automatic calibration by setting MPWLGCR[HW_WL_EN] */
+	writel(0x00000001, &mmdc0->mpwlgcr);
+
+	/*
+	 * 7. Upon completion of this process the MMDC de-asserts
+	 * the MPWLGCR[HW_WL_EN]
+	 */
+	wait_for_bit_le32(&mmdc0->mpwlgcr, 1 << 0, 0, 100, 0);
+
+	/*
+	 * 8. check for any errors: check both PHYs for x64 configuration,
+	 * if x32, check only PHY0
+	 */
+	if (readl(&mmdc0->mpwlgcr) & 0x00000F00)
+		errors |= 1;
+	if (sysinfo->dsize == 2)
+		if (readl(&mmdc1->mpwlgcr) & 0x00000F00)
+			errors |= 2;
+
+	debug("Ending write leveling calibration. Error mask: 0x%x\n", errors);
+
+	/* check to see if cal failed */
+	if ((readl(&mmdc0->mpwldectrl0) == 0x001F001F) &&
+	    (readl(&mmdc0->mpwldectrl1) == 0x001F001F) &&
+	    ((sysinfo->dsize < 2) ||
+	     ((readl(&mmdc1->mpwldectrl0) == 0x001F001F) &&
+	      (readl(&mmdc1->mpwldectrl1) == 0x001F001F)))) {
+		debug("Cal seems to have soft-failed due to memory not supporting write leveling on all channels. Restoring original write leveling values.\n");
+		writel(ldectrl[0], &mmdc0->mpwldectrl0);
+		writel(ldectrl[1], &mmdc0->mpwldectrl1);
+		if (sysinfo->dsize == 2) {
+			writel(ldectrl[2], &mmdc1->mpwldectrl0);
+			writel(ldectrl[3], &mmdc1->mpwldectrl1);
+		}
+		errors |= 4;
+	}
+
+	correct_mpwldectr_result(&mmdc0->mpwldectrl0);
+	correct_mpwldectr_result(&mmdc0->mpwldectrl1);
+	if (sysinfo->dsize == 2) {
+		correct_mpwldectr_result(&mmdc1->mpwldectrl0);
+		correct_mpwldectr_result(&mmdc1->mpwldectrl1);
+	}
+
+	/*
+	 * User should issue MRS command to exit write leveling mode
+	 * through Load Mode Register command
+	 * Register setting:
+	 * Bits[31:16] MR1 value "ddr_mr1" value from initialization
+	 * Bit[9] clear WL_EN to disable MMDC DQS output
+	 * Bits[6:4] set CMD bits for Load Mode Register programming
+	 * Bits[2:0] set CMD_BA to 0x1 for DDR MR1 programming
+	 */
+	writel((ddr_mr1 << 16) + 0x8031, &mmdc0->mdscr);
+
+	/* re-enable auto refresh and zq cal */
+	writel(esdmisc_val, &mmdc0->mdref);
+	writel(zq_val, &mmdc0->mpzqhwctrl);
+
+	debug("\tMMDC_MPWLDECTRL0 after write level cal: 0x%08x\n",
+	      readl(&mmdc0->mpwldectrl0));
+	debug("\tMMDC_MPWLDECTRL1 after write level cal: 0x%08x\n",
+	      readl(&mmdc0->mpwldectrl1));
+	if (sysinfo->dsize == 2) {
+		debug("\tMMDC_MPWLDECTRL0 after write level cal: 0x%08x\n",
+		      readl(&mmdc1->mpwldectrl0));
+		debug("\tMMDC_MPWLDECTRL1 after write level cal: 0x%08x\n",
+		      readl(&mmdc1->mpwldectrl1));
+	}
+
+	/* We must force a readback of these values, to get them to stick */
+	readl(&mmdc0->mpwldectrl0);
+	readl(&mmdc0->mpwldectrl1);
+	if (sysinfo->dsize == 2) {
+		readl(&mmdc1->mpwldectrl0);
+		readl(&mmdc1->mpwldectrl1);
+	}
+
+	/* enable DDR logic power down timer: */
+	setbits_le32(&mmdc0->mdpdc, 0x00005500);
+
+	/* Enable Adopt power down timer: */
+	clrbits_le32(&mmdc0->mapsr, 0x1);
+
+	/* Clear CON_REQ */
+	writel(0, &mmdc0->mdscr);
+
+	return errors;
+}
+
+static void mmdc_set_sdqs(bool set)
+{
+	struct mx6sdl_iomux_ddr_regs *mx6sdl_ddr_iomux =
+		(struct mx6sdl_iomux_ddr_regs *)MX6SDL_IOM_DDR_BASE;
+	struct mx6dq_iomux_ddr_regs *mx6dq_ddr_iomux =
+		(struct mx6dq_iomux_ddr_regs *)MX6DQ_IOM_DDR_BASE;
+	struct mx6sx_iomux_ddr_regs *mx6sx_ddr_iomux =
+		(struct mx6sx_iomux_ddr_regs *)MX6SX_IOM_DDR_BASE;
+	struct mx6sl_iomux_ddr_regs *mx6sl_ddr_iomux =
+		(struct mx6sl_iomux_ddr_regs *)MX6SL_IOM_DDR_BASE;
+	struct mx6ul_iomux_ddr_regs *mx6ul_ddr_iomux =
+		(struct mx6ul_iomux_ddr_regs *)MX6UL_IOM_DDR_BASE;
+	int i, sdqs_cnt;
+	u32 sdqs;
+
+	if (is_mx6sx()) {
+		sdqs = (u32)(&mx6sx_ddr_iomux->dram_sdqs0);
+		sdqs_cnt = 2;
+	} else if (is_mx6sl()) {
+		sdqs = (u32)(&mx6sl_ddr_iomux->dram_sdqs0);
+		sdqs_cnt = 2;
+	} else if (is_mx6ul() || is_mx6ull()) {
+		sdqs = (u32)(&mx6ul_ddr_iomux->dram_sdqs0);
+		sdqs_cnt = 2;
+	} else if (is_mx6sdl()) {
+		sdqs = (u32)(&mx6sdl_ddr_iomux->dram_sdqs0);
+		sdqs_cnt = 8;
+	} else {	/* MX6DQ */
+		sdqs = (u32)(&mx6dq_ddr_iomux->dram_sdqs0);
+		sdqs_cnt = 8;
+	}
+
+	for (i = 0; i < sdqs_cnt; i++) {
+		if (set)
+			setbits_le32(sdqs + (4 * i), 0x7000);
+		else
+			clrbits_le32(sdqs + (4 * i), 0x7000);
+	}
+}
+
+int mmdc_do_dqs_calibration(struct mx6_ddr_sysinfo const *sysinfo)
+{
+	struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+	struct mmdc_p_regs *mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+	bool cs0_enable;
+	bool cs1_enable;
+	bool cs0_enable_initial;
+	bool cs1_enable_initial;
+	u32 esdmisc_val;
+	u32 temp_ref;
+	u32 pddword = 0x00ffff00; /* best so far, place into MPPDCMPR1 */
+	u32 errors = 0;
+	u32 initdelay = 0x40404040;
+
+	/* check to see which chip selects are enabled */
+	cs0_enable_initial = readl(&mmdc0->mdctl) & 0x80000000;
+	cs1_enable_initial = readl(&mmdc0->mdctl) & 0x40000000;
+
+	/* disable DDR logic power down timer: */
+	clrbits_le32(&mmdc0->mdpdc, 0xff00);
+
+	/* disable Adopt power down timer: */
+	setbits_le32(&mmdc0->mapsr, 0x1);
+
+	/* set DQS pull ups */
+	mmdc_set_sdqs(true);
+
+	/* Save old RALAT and WALAT values */
+	esdmisc_val = readl(&mmdc0->mdmisc);
+
+	setbits_le32(&mmdc0->mdmisc,
+		     (1 << 6) | (1 << 7) | (1 << 8) | (1 << 16) | (1 << 17));
+
+	/* Disable auto refresh before proceeding with calibration */
+	temp_ref = readl(&mmdc0->mdref);
+	writel(0x0000c000, &mmdc0->mdref);
+
+	/*
+	 * Per the ref manual, issue one refresh cycle MDSCR[CMD]= 0x2,
+	 * this also sets the CON_REQ bit.
+	 */
+	if (cs0_enable_initial)
+		writel(0x00008020, &mmdc0->mdscr);
+	if (cs1_enable_initial)
+		writel(0x00008028, &mmdc0->mdscr);
+
+	/* poll to make sure the con_ack bit was asserted */
+	wait_for_bit_le32(&mmdc0->mdscr, 1 << 14, 1, 100, 0);
+
+	/*
+	 * Check MDMISC register CALIB_PER_CS to see which CS calibration
+	 * is targeted to (under normal cases, it should be cleared
+	 * as this is the default value, indicating calibration is directed
+	 * to CS0).
+	 * Disable the other chip select not being target for calibration
+	 * to avoid any potential issues.  This will get re-enabled at end
+	 * of calibration.
+	 */
+	if ((readl(&mmdc0->mdmisc) & 0x00100000) == 0)
+		clrbits_le32(&mmdc0->mdctl, 1 << 30);	/* clear SDE_1 */
+	else
+		clrbits_le32(&mmdc0->mdctl, 1 << 31);	/* clear SDE_0 */
+
+	/*
+	 * Check to see which chip selects are now enabled for
+	 * the remainder of the calibration.
+	 */
+	cs0_enable = readl(&mmdc0->mdctl) & 0x80000000;
+	cs1_enable = readl(&mmdc0->mdctl) & 0x40000000;
+
+	precharge_all(cs0_enable, cs1_enable);
+
+	/* Write the pre-defined value into MPPDCMPR1 */
+	writel(pddword, &mmdc0->mppdcmpr1);
+
+	/*
+	 * Issue a write access to the external DDR device by setting
+	 * the bit SW_DUMMY_WR (bit 0) in the MPSWDAR0 and then poll
+	 * this bit until it clears to indicate completion of the write access.
+	 */
+	setbits_le32(&mmdc0->mpswdar0, 1);
+	wait_for_bit_le32(&mmdc0->mpswdar0, 1 << 0, 0, 100, 0);
+
+	/* Set the RD_DL_ABS# bits to their default values
+	 * (will be calibrated later in the read delay-line calibration).
+	 * Both PHYs for x64 configuration, if x32, do only PHY0.
+	 */
+	writel(initdelay, &mmdc0->mprddlctl);
+	if (sysinfo->dsize == 0x2)
+		writel(initdelay, &mmdc1->mprddlctl);
+
+	/* Force a measurment, for previous delay setup to take effect. */
+	force_delay_measurement(sysinfo->dsize);
+
+	/*
+	 * ***************************
+	 * Read DQS Gating calibration
+	 * ***************************
+	 */
+	debug("Starting Read DQS Gating calibration.\n");
+
+	/*
+	 * Reset the read data FIFOs (two resets); only need to issue reset
+	 * to PHY0 since in x64 mode, the reset will also go to PHY1.
+	 */
+	reset_read_data_fifos();
+
+	/*
+	 * Start the automatic read DQS gating calibration process by
+	 * asserting MPDGCTRL0[HW_DG_EN] and MPDGCTRL0[DG_CMP_CYC]
+	 * and then poll MPDGCTRL0[HW_DG_EN]] until this bit clears
+	 * to indicate completion.
+	 * Also, ensure that MPDGCTRL0[HW_DG_ERR] is clear to indicate
+	 * no errors were seen during calibration.
+	 */
+
+	/*
+	 * Set bit 30: chooses option to wait 32 cycles instead of
+	 * 16 before comparing read data.
+	 */
+	setbits_le32(&mmdc0->mpdgctrl0, 1 << 30);
+	if (sysinfo->dsize == 2)
+		setbits_le32(&mmdc1->mpdgctrl0, 1 << 30);
+
+	/* Set bit 28 to start automatic read DQS gating calibration */
+	setbits_le32(&mmdc0->mpdgctrl0, 5 << 28);
+
+	/* Poll for completion.  MPDGCTRL0[HW_DG_EN] should be 0 */
+	wait_for_bit_le32(&mmdc0->mpdgctrl0, 1 << 28, 0, 100, 0);
+
+	/*
+	 * Check to see if any errors were encountered during calibration
+	 * (check MPDGCTRL0[HW_DG_ERR]).
+	 * Check both PHYs for x64 configuration, if x32, check only PHY0.
+	 */
+	if (readl(&mmdc0->mpdgctrl0) & 0x00001000)
+		errors |= 1;
+
+	if ((sysinfo->dsize == 0x2) && (readl(&mmdc1->mpdgctrl0) & 0x00001000))
+		errors |= 2;
+
+	/* now disable mpdgctrl0[DG_CMP_CYC] */
+	clrbits_le32(&mmdc0->mpdgctrl0, 1 << 30);
+	if (sysinfo->dsize == 2)
+		clrbits_le32(&mmdc1->mpdgctrl0, 1 << 30);
+
+	/*
+	 * DQS gating absolute offset should be modified from
+	 * reflecting (HW_DG_LOWx + HW_DG_UPx)/2 to
+	 * reflecting (HW_DG_UPx - 0x80)
+	 */
+	modify_dg_result(&mmdc0->mpdghwst0, &mmdc0->mpdghwst1,
+			 &mmdc0->mpdgctrl0);
+	modify_dg_result(&mmdc0->mpdghwst2, &mmdc0->mpdghwst3,
+			 &mmdc0->mpdgctrl1);
+	if (sysinfo->dsize == 0x2) {
+		modify_dg_result(&mmdc1->mpdghwst0, &mmdc1->mpdghwst1,
+				 &mmdc1->mpdgctrl0);
+		modify_dg_result(&mmdc1->mpdghwst2, &mmdc1->mpdghwst3,
+				 &mmdc1->mpdgctrl1);
+	}
+	debug("Ending Read DQS Gating calibration. Error mask: 0x%x\n", errors);
+
+	/*
+	 * **********************
+	 * Read Delay calibration
+	 * **********************
+	 */
+	debug("Starting Read Delay calibration.\n");
+
+	reset_read_data_fifos();
+
+	/*
+	 * 4. Issue the Precharge-All command to the DDR device for both
+	 * chip selects.  If only using one chip select, then precharge
+	 * only the desired chip select.
+	 */
+	precharge_all(cs0_enable, cs1_enable);
+
+	/*
+	 * 9. Read delay-line calibration
+	 * Start the automatic read calibration process by asserting
+	 * MPRDDLHWCTL[HW_RD_DL_EN].
+	 */
+	writel(0x00000030, &mmdc0->mprddlhwctl);
+
+	/*
+	 * 10. poll for completion
+	 * MMDC indicates that the write data calibration had finished by
+	 * setting MPRDDLHWCTL[HW_RD_DL_EN] = 0.   Also, ensure that
+	 * no error bits were set.
+	 */
+	wait_for_bit_le32(&mmdc0->mprddlhwctl, 1 << 4, 0, 100, 0);
+
+	/* check both PHYs for x64 configuration, if x32, check only PHY0 */
+	if (readl(&mmdc0->mprddlhwctl) & 0x0000000f)
+		errors |= 4;
+
+	if ((sysinfo->dsize == 0x2) &&
+	    (readl(&mmdc1->mprddlhwctl) & 0x0000000f))
+		errors |= 8;
+
+	debug("Ending Read Delay calibration. Error mask: 0x%x\n", errors);
+
+	/*
+	 * ***********************
+	 * Write Delay Calibration
+	 * ***********************
+	 */
+	debug("Starting Write Delay calibration.\n");
+
+	reset_read_data_fifos();
+
+	/*
+	 * 4. Issue the Precharge-All command to the DDR device for both
+	 * chip selects. If only using one chip select, then precharge
+	 * only the desired chip select.
+	 */
+	precharge_all(cs0_enable, cs1_enable);
+
+	/*
+	 * 8. Set the WR_DL_ABS# bits to their default values.
+	 * Both PHYs for x64 configuration, if x32, do only PHY0.
+	 */
+	writel(initdelay, &mmdc0->mpwrdlctl);
+	if (sysinfo->dsize == 0x2)
+		writel(initdelay, &mmdc1->mpwrdlctl);
+
+	/*
+	 * XXX This isn't in the manual. Force a measurement,
+	 * for previous delay setup to effect.
+	 */
+	force_delay_measurement(sysinfo->dsize);
+
+	/*
+	 * 9. 10. Start the automatic write calibration process
+	 * by asserting MPWRDLHWCTL0[HW_WR_DL_EN].
+	 */
+	writel(0x00000030, &mmdc0->mpwrdlhwctl);
+
+	/*
+	 * Poll for completion.
+	 * MMDC indicates that the write data calibration had finished
+	 * by setting MPWRDLHWCTL[HW_WR_DL_EN] = 0.
+	 * Also, ensure that no error bits were set.
+	 */
+	wait_for_bit_le32(&mmdc0->mpwrdlhwctl, 1 << 4, 0, 100, 0);
+
+	/* Check both PHYs for x64 configuration, if x32, check only PHY0 */
+	if (readl(&mmdc0->mpwrdlhwctl) & 0x0000000f)
+		errors |= 16;
+
+	if ((sysinfo->dsize == 0x2) &&
+	    (readl(&mmdc1->mpwrdlhwctl) & 0x0000000f))
+		errors |= 32;
+
+	debug("Ending Write Delay calibration. Error mask: 0x%x\n", errors);
+
+	reset_read_data_fifos();
+
+	/* Enable DDR logic power down timer */
+	setbits_le32(&mmdc0->mdpdc, 0x00005500);
+
+	/* Enable Adopt power down timer */
+	clrbits_le32(&mmdc0->mapsr, 0x1);
+
+	/* Restore MDMISC value (RALAT, WALAT) to MMDCP1 */
+	writel(esdmisc_val, &mmdc0->mdmisc);
+
+	/* Clear DQS pull ups */
+	mmdc_set_sdqs(false);
+
+	/* Re-enable SDE (chip selects) if they were set initially */
+	if (cs1_enable_initial)
+		/* Set SDE_1 */
+		setbits_le32(&mmdc0->mdctl, 1 << 30);
+
+	if (cs0_enable_initial)
+		/* Set SDE_0 */
+		setbits_le32(&mmdc0->mdctl, 1 << 31);
+
+	/* Re-enable to auto refresh */
+	writel(temp_ref, &mmdc0->mdref);
+
+	/* Clear the MDSCR (including the con_req bit) */
+	writel(0x0, &mmdc0->mdscr);	/* CS0 */
+
+	/* Poll to make sure the con_ack bit is clear */
+	wait_for_bit_le32(&mmdc0->mdscr, 1 << 14, 0, 100, 0);
+
+	/*
+	 * Print out the registers that were updated as a result
+	 * of the calibration process.
+	 */
+	debug("MMDC registers updated from calibration\n");
+	debug("Read DQS gating calibration:\n");
+	debug("\tMPDGCTRL0 PHY0 = 0x%08x\n", readl(&mmdc0->mpdgctrl0));
+	debug("\tMPDGCTRL1 PHY0 = 0x%08x\n", readl(&mmdc0->mpdgctrl1));
+	if (sysinfo->dsize == 2) {
+		debug("\tMPDGCTRL0 PHY1 = 0x%08x\n", readl(&mmdc1->mpdgctrl0));
+		debug("\tMPDGCTRL1 PHY1 = 0x%08x\n", readl(&mmdc1->mpdgctrl1));
+	}
+	debug("Read calibration:\n");
+	debug("\tMPRDDLCTL PHY0 = 0x%08x\n", readl(&mmdc0->mprddlctl));
+	if (sysinfo->dsize == 2)
+		debug("\tMPRDDLCTL PHY1 = 0x%08x\n", readl(&mmdc1->mprddlctl));
+	debug("Write calibration:\n");
+	debug("\tMPWRDLCTL PHY0 = 0x%08x\n", readl(&mmdc0->mpwrdlctl));
+	if (sysinfo->dsize == 2)
+		debug("\tMPWRDLCTL PHY1 = 0x%08x\n", readl(&mmdc1->mpwrdlctl));
+
+	/*
+	 * Registers below are for debugging purposes.  These print out
+	 * the upper and lower boundaries captured during
+	 * read DQS gating calibration.
+	 */
+	debug("Status registers bounds for read DQS gating:\n");
+	debug("\tMPDGHWST0 PHY0 = 0x%08x\n", readl(&mmdc0->mpdghwst0));
+	debug("\tMPDGHWST1 PHY0 = 0x%08x\n", readl(&mmdc0->mpdghwst1));
+	debug("\tMPDGHWST2 PHY0 = 0x%08x\n", readl(&mmdc0->mpdghwst2));
+	debug("\tMPDGHWST3 PHY0 = 0x%08x\n", readl(&mmdc0->mpdghwst3));
+	if (sysinfo->dsize == 2) {
+		debug("\tMPDGHWST0 PHY1 = 0x%08x\n", readl(&mmdc1->mpdghwst0));
+		debug("\tMPDGHWST1 PHY1 = 0x%08x\n", readl(&mmdc1->mpdghwst1));
+		debug("\tMPDGHWST2 PHY1 = 0x%08x\n", readl(&mmdc1->mpdghwst2));
+		debug("\tMPDGHWST3 PHY1 = 0x%08x\n", readl(&mmdc1->mpdghwst3));
+	}
+
+	debug("Final do_dqs_calibration error mask: 0x%x\n", errors);
+
+	return errors;
+}
+#endif
+
+#if defined(CONFIG_MX6SX)
+/* Configure MX6SX mmdc iomux */
+void mx6sx_dram_iocfg(unsigned width,
+		      const struct mx6sx_iomux_ddr_regs *ddr,
+		      const struct mx6sx_iomux_grp_regs *grp)
+{
+	struct mx6sx_iomux_ddr_regs *mx6_ddr_iomux;
+	struct mx6sx_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6sx_iomux_ddr_regs *)MX6SX_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6sx_iomux_grp_regs *)MX6SX_IOM_GRP_BASE;
+
+	/* DDR IO TYPE */
+	writel(grp->grp_ddr_type, &mx6_grp_iomux->grp_ddr_type);
+	writel(grp->grp_ddrpke, &mx6_grp_iomux->grp_ddrpke);
+
+	/* CLOCK */
+	writel(ddr->dram_sdclk_0, &mx6_ddr_iomux->dram_sdclk_0);
+
+	/* ADDRESS */
+	writel(ddr->dram_cas, &mx6_ddr_iomux->dram_cas);
+	writel(ddr->dram_ras, &mx6_ddr_iomux->dram_ras);
+	writel(grp->grp_addds, &mx6_grp_iomux->grp_addds);
+
+	/* Control */
+	writel(ddr->dram_reset, &mx6_ddr_iomux->dram_reset);
+	writel(ddr->dram_sdba2, &mx6_ddr_iomux->dram_sdba2);
+	writel(ddr->dram_sdcke0, &mx6_ddr_iomux->dram_sdcke0);
+	writel(ddr->dram_sdcke1, &mx6_ddr_iomux->dram_sdcke1);
+	writel(ddr->dram_odt0, &mx6_ddr_iomux->dram_odt0);
+	writel(ddr->dram_odt1, &mx6_ddr_iomux->dram_odt1);
+	writel(grp->grp_ctlds, &mx6_grp_iomux->grp_ctlds);
+
+	/* Data Strobes */
+	writel(grp->grp_ddrmode_ctl, &mx6_grp_iomux->grp_ddrmode_ctl);
+	writel(ddr->dram_sdqs0, &mx6_ddr_iomux->dram_sdqs0);
+	writel(ddr->dram_sdqs1, &mx6_ddr_iomux->dram_sdqs1);
+	if (width >= 32) {
+		writel(ddr->dram_sdqs2, &mx6_ddr_iomux->dram_sdqs2);
+		writel(ddr->dram_sdqs3, &mx6_ddr_iomux->dram_sdqs3);
+	}
+
+	/* Data */
+	writel(grp->grp_ddrmode, &mx6_grp_iomux->grp_ddrmode);
+	writel(grp->grp_b0ds, &mx6_grp_iomux->grp_b0ds);
+	writel(grp->grp_b1ds, &mx6_grp_iomux->grp_b1ds);
+	if (width >= 32) {
+		writel(grp->grp_b2ds, &mx6_grp_iomux->grp_b2ds);
+		writel(grp->grp_b3ds, &mx6_grp_iomux->grp_b3ds);
+	}
+	writel(ddr->dram_dqm0, &mx6_ddr_iomux->dram_dqm0);
+	writel(ddr->dram_dqm1, &mx6_ddr_iomux->dram_dqm1);
+	if (width >= 32) {
+		writel(ddr->dram_dqm2, &mx6_ddr_iomux->dram_dqm2);
+		writel(ddr->dram_dqm3, &mx6_ddr_iomux->dram_dqm3);
+	}
+}
+#endif
+
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+void mx6ul_dram_iocfg(unsigned width,
+		      const struct mx6ul_iomux_ddr_regs *ddr,
+		      const struct mx6ul_iomux_grp_regs *grp)
+{
+	struct mx6ul_iomux_ddr_regs *mx6_ddr_iomux;
+	struct mx6ul_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6ul_iomux_ddr_regs *)MX6UL_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6ul_iomux_grp_regs *)MX6UL_IOM_GRP_BASE;
+
+	/* DDR IO TYPE */
+	writel(grp->grp_ddr_type, &mx6_grp_iomux->grp_ddr_type);
+	writel(grp->grp_ddrpke, &mx6_grp_iomux->grp_ddrpke);
+
+	/* CLOCK */
+	writel(ddr->dram_sdclk_0, &mx6_ddr_iomux->dram_sdclk_0);
+
+	/* ADDRESS */
+	writel(ddr->dram_cas, &mx6_ddr_iomux->dram_cas);
+	writel(ddr->dram_ras, &mx6_ddr_iomux->dram_ras);
+	writel(grp->grp_addds, &mx6_grp_iomux->grp_addds);
+
+	/* Control */
+	writel(ddr->dram_reset, &mx6_ddr_iomux->dram_reset);
+	writel(ddr->dram_sdba2, &mx6_ddr_iomux->dram_sdba2);
+	writel(ddr->dram_odt0, &mx6_ddr_iomux->dram_odt0);
+	writel(ddr->dram_odt1, &mx6_ddr_iomux->dram_odt1);
+	writel(grp->grp_ctlds, &mx6_grp_iomux->grp_ctlds);
+
+	/* Data Strobes */
+	writel(grp->grp_ddrmode_ctl, &mx6_grp_iomux->grp_ddrmode_ctl);
+	writel(ddr->dram_sdqs0, &mx6_ddr_iomux->dram_sdqs0);
+	writel(ddr->dram_sdqs1, &mx6_ddr_iomux->dram_sdqs1);
+
+	/* Data */
+	writel(grp->grp_ddrmode, &mx6_grp_iomux->grp_ddrmode);
+	writel(grp->grp_b0ds, &mx6_grp_iomux->grp_b0ds);
+	writel(grp->grp_b1ds, &mx6_grp_iomux->grp_b1ds);
+	writel(ddr->dram_dqm0, &mx6_ddr_iomux->dram_dqm0);
+	writel(ddr->dram_dqm1, &mx6_ddr_iomux->dram_dqm1);
+}
+#endif
+
+#if defined(CONFIG_MX6SL)
+void mx6sl_dram_iocfg(unsigned width,
+		      const struct mx6sl_iomux_ddr_regs *ddr,
+		      const struct mx6sl_iomux_grp_regs *grp)
+{
+	struct mx6sl_iomux_ddr_regs *mx6_ddr_iomux;
+	struct mx6sl_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6sl_iomux_ddr_regs *)MX6SL_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6sl_iomux_grp_regs *)MX6SL_IOM_GRP_BASE;
+
+	/* DDR IO TYPE */
+	mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+	mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+	/* CLOCK */
+	mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+
+	/* ADDRESS */
+	mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+	mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+	mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+	/* Control */
+	mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+	mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+	mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+	/* Data Strobes */
+	mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+	mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+	mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+		mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+	}
+
+	/* Data */
+	mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+	mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+	mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+	if (width >= 32) {
+		mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+		mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+	}
+
+	mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+	mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+		mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+	}
+}
+#endif
+
+#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+/* Configure MX6DQ mmdc iomux */
+void mx6dq_dram_iocfg(unsigned width,
+		      const struct mx6dq_iomux_ddr_regs *ddr,
+		      const struct mx6dq_iomux_grp_regs *grp)
+{
+	volatile struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux;
+	volatile struct mx6dq_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6dq_iomux_ddr_regs *)MX6DQ_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6dq_iomux_grp_regs *)MX6DQ_IOM_GRP_BASE;
+
+	/* DDR IO Type */
+	mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+	mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+	/* Clock */
+	mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+	mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
+
+	/* Address */
+	mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+	mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+	mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+	/* Control */
+	mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+	mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
+	mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
+	mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+	mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
+	mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
+	mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+	/* Data Strobes */
+	mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+	mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+	mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+		mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
+		mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
+		mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
+		mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
+	}
+
+	/* Data */
+	mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+	mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+	mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+	if (width >= 32) {
+		mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+		mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+	}
+	if (width >= 64) {
+		mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
+		mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
+		mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
+		mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
+	}
+	mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+	mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+		mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
+		mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
+		mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
+		mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
+	}
+}
+#endif
+
+#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+/* Configure MX6SDL mmdc iomux */
+void mx6sdl_dram_iocfg(unsigned width,
+		       const struct mx6sdl_iomux_ddr_regs *ddr,
+		       const struct mx6sdl_iomux_grp_regs *grp)
+{
+	volatile struct mx6sdl_iomux_ddr_regs *mx6_ddr_iomux;
+	volatile struct mx6sdl_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6sdl_iomux_ddr_regs *)MX6SDL_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6sdl_iomux_grp_regs *)MX6SDL_IOM_GRP_BASE;
+
+	/* DDR IO Type */
+	mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+	mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+	/* Clock */
+	mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+	mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
+
+	/* Address */
+	mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+	mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+	mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+	/* Control */
+	mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+	mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
+	mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
+	mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+	mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
+	mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
+	mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+	/* Data Strobes */
+	mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+	mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+	mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+		mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
+		mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
+		mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
+		mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
+	}
+
+	/* Data */
+	mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+	mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+	mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+	if (width >= 32) {
+		mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+		mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+	}
+	if (width >= 64) {
+		mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
+		mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
+		mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
+		mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
+	}
+	mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+	mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+		mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
+		mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
+		mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
+		mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
+	}
+}
+#endif
+
+/*
+ * Configure mx6 mmdc registers based on:
+ *  - board-specific memory configuration
+ *  - board-specific calibration data
+ *  - ddr3/lpddr2 chip details
+ *
+ * The various calculations here are derived from the Freescale
+ * 1. i.Mx6DQSDL DDR3 Script Aid spreadsheet (DOC-94917) designed to generate
+ *    MMDC configuration registers based on memory system and memory chip
+ *    parameters.
+ *
+ * 2. i.Mx6SL LPDDR2 Script Aid spreadsheet V0.04 designed to generate MMDC
+ *    configuration registers based on memory system and memory chip
+ *    parameters.
+ *
+ * The defaults here are those which were specified in the spreadsheet.
+ * For details on each register, refer to the IMX6DQRM and/or IMX6SDLRM
+ * and/or IMX6SLRM section titled MMDC initialization.
+ */
+#define MR(val, ba, cmd, cs1) \
+	((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
+#define MMDC1(entry, value) do {					  \
+	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl())	  \
+		mmdc1->entry = value;					  \
+	} while (0)
+
+/* see BOOT_CFG3 description Table 5-4. EIM Boot Fusemap */
+#define BOOT_CFG3_DDR_MASK	0x30
+#define BOOT_CFG3_EXT_DDR_MASK	0x33
+
+#define DDR_MMAP_NOC_SINGLE	0
+#define DDR_MMAP_NOC_DUAL	0x31
+
+/* NoC ACTIVATE shifts */
+#define NOC_RD_SHIFT		0
+#define NOC_FAW_PERIOD_SHIFT	4
+#define NOC_FAW_BANKS_SHIFT	10
+
+/* NoC DdrTiming shifts */
+#define NOC_ACT_TO_ACT_SHIFT	0
+#define NOC_RD_TO_MISS_SHIFT	6
+#define NOC_WR_TO_MISS_SHIFT	12
+#define NOC_BURST_LEN_SHIFT	18
+#define NOC_RD_TO_WR_SHIFT	21
+#define NOC_WR_TO_RD_SHIFT	26
+#define NOC_BW_RATIO_SHIFT	31
+
+/*
+ * According JESD209-2B-LPDDR2: Table 103
+ * WL: write latency
+ */
+static int lpddr2_wl(uint32_t mem_speed)
+{
+	switch (mem_speed) {
+	case 1066:
+	case 933:
+		return 4;
+	case 800:
+		return 3;
+	case 677:
+	case 533:
+		return 2;
+	case 400:
+	case 333:
+		return 1;
+	default:
+		puts("invalid memory speed\n");
+		hang();
+	}
+
+	return 0;
+}
+
+/*
+ * According JESD209-2B-LPDDR2: Table 103
+ * RL: read latency
+ */
+static int lpddr2_rl(uint32_t mem_speed)
+{
+	switch (mem_speed) {
+	case 1066:
+		return 8;
+	case 933:
+		return 7;
+	case 800:
+		return 6;
+	case 677:
+		return 5;
+	case 533:
+		return 4;
+	case 400:
+	case 333:
+		return 3;
+	default:
+		puts("invalid memory speed\n");
+		hang();
+	}
+
+	return 0;
+}
+
+void mx6_lpddr2_cfg(const struct mx6_ddr_sysinfo *sysinfo,
+		    const struct mx6_mmdc_calibration *calib,
+		    const struct mx6_lpddr2_cfg *lpddr2_cfg)
+{
+	volatile struct mmdc_p_regs *mmdc0;
+	u32 val;
+	u8 tcke, tcksrx, tcksre, trrd;
+	u8 twl, txp, tfaw, tcl;
+	u16 tras, twr, tmrd, trtp, twtr, trfc, txsr;
+	u16 trcd_lp, trppb_lp, trpab_lp, trc_lp;
+	u16 cs0_end;
+	u8 coladdr;
+	int clkper; /* clock period in picoseconds */
+	int clock;  /* clock freq in mHz */
+	int cs;
+
+	/* only support 16/32 bits */
+	if (sysinfo->dsize > 1)
+		hang();
+
+	mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+
+	clock = mxc_get_clock(MXC_DDR_CLK) / 1000000U;
+	clkper = (1000 * 1000) / clock; /* pico seconds */
+
+	twl = lpddr2_wl(lpddr2_cfg->mem_speed) - 1;
+
+	/* LPDDR2-S2 and LPDDR2-S4 have the same tRFC value. */
+	switch (lpddr2_cfg->density) {
+	case 1:
+	case 2:
+	case 4:
+		trfc = DIV_ROUND_UP(130000, clkper) - 1;
+		txsr = DIV_ROUND_UP(140000, clkper) - 1;
+		break;
+	case 8:
+		trfc = DIV_ROUND_UP(210000, clkper) - 1;
+		txsr = DIV_ROUND_UP(220000, clkper) - 1;
+		break;
+	default:
+		/*
+		 * 64Mb, 128Mb, 256Mb, 512Mb are not supported currently.
+		 */
+		hang();
+		break;
+	}
+	/*
+	 * txpdll, txpr, taonpd and taofpd are not relevant in LPDDR2 mode,
+	 * set them to 0. */
+	txp = DIV_ROUND_UP(7500, clkper) - 1;
+	tcke = 3;
+	if (lpddr2_cfg->mem_speed == 333)
+		tfaw = DIV_ROUND_UP(60000, clkper) - 1;
+	else
+		tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+	trrd = DIV_ROUND_UP(10000, clkper) - 1;
+
+	/* tckesr for LPDDR2 */
+	tcksre = DIV_ROUND_UP(15000, clkper);
+	tcksrx = tcksre;
+	twr  = DIV_ROUND_UP(15000, clkper) - 1;
+	/*
+	 * tMRR: 2, tMRW: 5
+	 * tMRD should be set to max(tMRR, tMRW)
+	 */
+	tmrd = 5;
+	tras = DIV_ROUND_UP(lpddr2_cfg->trasmin, clkper / 10) - 1;
+	/* LPDDR2 mode use tRCD_LP filed in MDCFG3. */
+	trcd_lp = DIV_ROUND_UP(lpddr2_cfg->trcd_lp, clkper / 10) - 1;
+	trc_lp = DIV_ROUND_UP(lpddr2_cfg->trasmin + lpddr2_cfg->trppb_lp,
+			      clkper / 10) - 1;
+	trppb_lp = DIV_ROUND_UP(lpddr2_cfg->trppb_lp, clkper / 10) - 1;
+	trpab_lp = DIV_ROUND_UP(lpddr2_cfg->trpab_lp, clkper / 10) - 1;
+	/* To LPDDR2, CL in MDCFG0 refers to RL */
+	tcl = lpddr2_rl(lpddr2_cfg->mem_speed) - 3;
+	twtr = DIV_ROUND_UP(7500, clkper) - 1;
+	trtp = DIV_ROUND_UP(7500, clkper) - 1;
+
+	cs0_end = 4 * sysinfo->cs_density - 1;
+
+	debug("density:%d Gb (%d Gb per chip)\n",
+	      sysinfo->cs_density, lpddr2_cfg->density);
+	debug("clock: %dMHz (%d ps)\n", clock, clkper);
+	debug("memspd:%d\n", lpddr2_cfg->mem_speed);
+	debug("trcd_lp=%d\n", trcd_lp);
+	debug("trppb_lp=%d\n", trppb_lp);
+	debug("trpab_lp=%d\n", trpab_lp);
+	debug("trc_lp=%d\n", trc_lp);
+	debug("tcke=%d\n", tcke);
+	debug("tcksrx=%d\n", tcksrx);
+	debug("tcksre=%d\n", tcksre);
+	debug("trfc=%d\n", trfc);
+	debug("txsr=%d\n", txsr);
+	debug("txp=%d\n", txp);
+	debug("tfaw=%d\n", tfaw);
+	debug("tcl=%d\n", tcl);
+	debug("tras=%d\n", tras);
+	debug("twr=%d\n", twr);
+	debug("tmrd=%d\n", tmrd);
+	debug("twl=%d\n", twl);
+	debug("trtp=%d\n", trtp);
+	debug("twtr=%d\n", twtr);
+	debug("trrd=%d\n", trrd);
+	debug("cs0_end=%d\n", cs0_end);
+	debug("ncs=%d\n", sysinfo->ncs);
+
+	/*
+	 * board-specific configuration:
+	 *  These values are determined empirically and vary per board layout
+	 */
+	mmdc0->mpwldectrl0 = calib->p0_mpwldectrl0;
+	mmdc0->mpwldectrl1 = calib->p0_mpwldectrl1;
+	mmdc0->mpdgctrl0 = calib->p0_mpdgctrl0;
+	mmdc0->mpdgctrl1 = calib->p0_mpdgctrl1;
+	mmdc0->mprddlctl = calib->p0_mprddlctl;
+	mmdc0->mpwrdlctl = calib->p0_mpwrdlctl;
+	mmdc0->mpzqlp2ctl = calib->mpzqlp2ctl;
+
+	/* Read data DQ Byte0-3 delay */
+	mmdc0->mprddqby0dl = 0x33333333;
+	mmdc0->mprddqby1dl = 0x33333333;
+	if (sysinfo->dsize > 0) {
+		mmdc0->mprddqby2dl = 0x33333333;
+		mmdc0->mprddqby3dl = 0x33333333;
+	}
+
+	/* Write data DQ Byte0-3 delay */
+	mmdc0->mpwrdqby0dl = 0xf3333333;
+	mmdc0->mpwrdqby1dl = 0xf3333333;
+	if (sysinfo->dsize > 0) {
+		mmdc0->mpwrdqby2dl = 0xf3333333;
+		mmdc0->mpwrdqby3dl = 0xf3333333;
+	}
+
+	/*
+	 * In LPDDR2 mode this register should be cleared,
+	 * so no termination will be activated.
+	 */
+	mmdc0->mpodtctrl = 0;
+
+	/* complete calibration */
+	val = (1 << 11); /* Force measurement on delay-lines */
+	mmdc0->mpmur0 = val;
+
+	/* Step 1: configuration request */
+	mmdc0->mdscr = (u32)(1 << 15); /* config request */
+
+	/* Step 2: Timing configuration */
+	mmdc0->mdcfg0 = (trfc << 24) | (txsr << 16) | (txp << 13) |
+			(tfaw << 4) | tcl;
+	mmdc0->mdcfg1 = (tras << 16) | (twr << 9) | (tmrd << 5) | twl;
+	mmdc0->mdcfg2 = (trtp << 6) | (twtr << 3) | trrd;
+	mmdc0->mdcfg3lp = (trc_lp << 16) | (trcd_lp << 8) |
+			  (trppb_lp << 4) | trpab_lp;
+	mmdc0->mdotc = 0;
+
+	mmdc0->mdasp = cs0_end; /* CS addressing */
+
+	/* Step 3: Configure DDR type */
+	mmdc0->mdmisc = (sysinfo->cs1_mirror << 19) | (sysinfo->walat << 16) |
+			(sysinfo->bi_on << 12) | (sysinfo->mif3_mode << 9) |
+			(sysinfo->ralat << 6) | (1 << 3);
+
+	/* Step 4: Configure delay while leaving reset */
+	mmdc0->mdor = (sysinfo->sde_to_rst << 8) |
+		      (sysinfo->rst_to_cke << 0);
+
+	/* Step 5: Configure DDR physical parameters (density and burst len) */
+	coladdr = lpddr2_cfg->coladdr;
+	if (lpddr2_cfg->coladdr == 8)		/* 8-bit COL is 0x3 */
+		coladdr += 4;
+	else if (lpddr2_cfg->coladdr == 12)	/* 12-bit COL is 0x4 */
+		coladdr += 1;
+	mmdc0->mdctl =  (lpddr2_cfg->rowaddr - 11) << 24 |	/* ROW */
+			(coladdr - 9) << 20 |			/* COL */
+			(0 << 19) |	/* Burst Length = 4 for LPDDR2 */
+			(sysinfo->dsize << 16);	/* DDR data bus size */
+
+	/* Step 6: Perform ZQ calibration */
+	val = 0xa1390003; /* one-time HW ZQ calib */
+	mmdc0->mpzqhwctrl = val;
+
+	/* Step 7: Enable MMDC with desired chip select */
+	mmdc0->mdctl |= (1 << 31) |			     /* SDE_0 for CS0 */
+			((sysinfo->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */
+
+	/* Step 8: Write Mode Registers to Init LPDDR2 devices */
+	for (cs = 0; cs < sysinfo->ncs; cs++) {
+		/* MR63: reset */
+		mmdc0->mdscr = MR(63, 0, 3, cs);
+		/* MR10: calibration,
+		 * 0xff is calibration command after intilization.
+		 */
+		val = 0xA | (0xff << 8);
+		mmdc0->mdscr = MR(val, 0, 3, cs);
+		/* MR1 */
+		val = 0x1 | (0x82 << 8);
+		mmdc0->mdscr = MR(val, 0, 3, cs);
+		/* MR2 */
+		val = 0x2 | (0x04 << 8);
+		mmdc0->mdscr = MR(val, 0, 3, cs);
+		/* MR3 */
+		val = 0x3 | (0x02 << 8);
+		mmdc0->mdscr = MR(val, 0, 3, cs);
+	}
+
+	/* Step 10: Power down control and self-refresh */
+	mmdc0->mdpdc = (tcke & 0x7) << 16 |
+			5            << 12 |  /* PWDT_1: 256 cycles */
+			5            <<  8 |  /* PWDT_0: 256 cycles */
+			1            <<  6 |  /* BOTH_CS_PD */
+			(tcksrx & 0x7) << 3 |
+			(tcksre & 0x7);
+	mmdc0->mapsr = 0x00001006; /* ADOPT power down enabled */
+
+	/* Step 11: Configure ZQ calibration: one-time and periodic 1ms */
+	val = 0xa1310003;
+	mmdc0->mpzqhwctrl = val;
+
+	/* Step 12: Configure and activate periodic refresh */
+	mmdc0->mdref = (sysinfo->refsel << 14) | (sysinfo->refr << 11);
+
+	/* Step 13: Deassert config request - init complete */
+	mmdc0->mdscr = 0x00000000;
+
+	/* wait for auto-ZQ calibration to complete */
+	mdelay(1);
+}
+
+void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
+		  const struct mx6_mmdc_calibration *calib,
+		  const struct mx6_ddr3_cfg *ddr3_cfg)
+{
+	volatile struct mmdc_p_regs *mmdc0;
+	volatile struct mmdc_p_regs *mmdc1;
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+	u8 soc_boot_cfg3 = (readl(&src_regs->sbmr1) >> 16) & 0xff;
+	u32 val;
+	u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
+	u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
+	u8 todt_idle_off = 0x4; /* from DDR3 Script Aid spreadsheet */
+	u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr;
+	u16 cs0_end;
+	u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */
+	u8 coladdr;
+	int clkper; /* clock period in picoseconds */
+	int clock; /* clock freq in MHz */
+	int cs;
+	u16 mem_speed = ddr3_cfg->mem_speed;
+
+	mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl())
+		mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+
+	/* Limit mem_speed for MX6D/MX6Q */
+	if (is_mx6dq() || is_mx6dqp()) {
+		if (mem_speed > 1066)
+			mem_speed = 1066; /* 1066 MT/s */
+
+		tcwl = 4;
+	}
+	/* Limit mem_speed for MX6S/MX6DL */
+	else {
+		if (mem_speed > 800)
+			mem_speed = 800;  /* 800 MT/s */
+
+		tcwl = 3;
+	}
+
+	clock = mem_speed / 2;
+	/*
+	 * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports
+	 * up to 528 MHz, so reduce the clock to fit chip specs
+	 */
+	if (is_mx6dq() || is_mx6dqp()) {
+		if (clock > 528)
+			clock = 528; /* 528 MHz */
+	}
+
+	clkper = (1000 * 1000) / clock; /* pico seconds */
+	todtlon = tcwl;
+	taxpd = tcwl;
+	tanpd = tcwl;
+
+	switch (ddr3_cfg->density) {
+	case 1: /* 1Gb per chip */
+		trfc = DIV_ROUND_UP(110000, clkper) - 1;
+		txs = DIV_ROUND_UP(120000, clkper) - 1;
+		break;
+	case 2: /* 2Gb per chip */
+		trfc = DIV_ROUND_UP(160000, clkper) - 1;
+		txs = DIV_ROUND_UP(170000, clkper) - 1;
+		break;
+	case 4: /* 4Gb per chip */
+		trfc = DIV_ROUND_UP(260000, clkper) - 1;
+		txs = DIV_ROUND_UP(270000, clkper) - 1;
+		break;
+	case 8: /* 8Gb per chip */
+		trfc = DIV_ROUND_UP(350000, clkper) - 1;
+		txs = DIV_ROUND_UP(360000, clkper) - 1;
+		break;
+	default:
+		/* invalid density */
+		puts("invalid chip density\n");
+		hang();
+		break;
+	}
+	txpr = txs;
+
+	switch (mem_speed) {
+	case 800:
+		txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
+		tcke = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
+		if (ddr3_cfg->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(40000, clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
+		}
+		break;
+	case 1066:
+		txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
+		tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1;
+		if (ddr3_cfg->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(37500, clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
+		}
+		break;
+	default:
+		puts("invalid memory speed\n");
+		hang();
+		break;
+	}
+	txpdll = DIV_ROUND_UP(max(10 * clkper, 24000), clkper) - 1;
+	tcksre = DIV_ROUND_UP(max(5 * clkper, 10000), clkper);
+	taonpd = DIV_ROUND_UP(2000, clkper) - 1;
+	tcksrx = tcksre;
+	taofpd = taonpd;
+	twr  = DIV_ROUND_UP(15000, clkper) - 1;
+	tmrd = DIV_ROUND_UP(max(12 * clkper, 15000), clkper) - 1;
+	trc  = DIV_ROUND_UP(ddr3_cfg->trcmin, clkper / 10) - 1;
+	tras = DIV_ROUND_UP(ddr3_cfg->trasmin, clkper / 10) - 1;
+	tcl  = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 3;
+	trp  = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 1;
+	twtr = ROUND(max(4 * clkper, 7500) / clkper, 1) - 1;
+	trcd = trp;
+	trtp = twtr;
+	cs0_end = 4 * sysinfo->cs_density - 1;
+
+	debug("density:%d Gb (%d Gb per chip)\n",
+	      sysinfo->cs_density, ddr3_cfg->density);
+	debug("clock: %dMHz (%d ps)\n", clock, clkper);
+	debug("memspd:%d\n", mem_speed);
+	debug("tcke=%d\n", tcke);
+	debug("tcksrx=%d\n", tcksrx);
+	debug("tcksre=%d\n", tcksre);
+	debug("taofpd=%d\n", taofpd);
+	debug("taonpd=%d\n", taonpd);
+	debug("todtlon=%d\n", todtlon);
+	debug("tanpd=%d\n", tanpd);
+	debug("taxpd=%d\n", taxpd);
+	debug("trfc=%d\n", trfc);
+	debug("txs=%d\n", txs);
+	debug("txp=%d\n", txp);
+	debug("txpdll=%d\n", txpdll);
+	debug("tfaw=%d\n", tfaw);
+	debug("tcl=%d\n", tcl);
+	debug("trcd=%d\n", trcd);
+	debug("trp=%d\n", trp);
+	debug("trc=%d\n", trc);
+	debug("tras=%d\n", tras);
+	debug("twr=%d\n", twr);
+	debug("tmrd=%d\n", tmrd);
+	debug("tcwl=%d\n", tcwl);
+	debug("tdllk=%d\n", tdllk);
+	debug("trtp=%d\n", trtp);
+	debug("twtr=%d\n", twtr);
+	debug("trrd=%d\n", trrd);
+	debug("txpr=%d\n", txpr);
+	debug("cs0_end=%d\n", cs0_end);
+	debug("ncs=%d\n", sysinfo->ncs);
+	debug("Rtt_wr=%d\n", sysinfo->rtt_wr);
+	debug("Rtt_nom=%d\n", sysinfo->rtt_nom);
+	debug("SRT=%d\n", ddr3_cfg->SRT);
+	debug("twr=%d\n", twr);
+
+	/*
+	 * board-specific configuration:
+	 *  These values are determined empirically and vary per board layout
+	 *  see:
+	 *   appnote, ddr3 spreadsheet
+	 */
+	mmdc0->mpwldectrl0 = calib->p0_mpwldectrl0;
+	mmdc0->mpwldectrl1 = calib->p0_mpwldectrl1;
+	mmdc0->mpdgctrl0 = calib->p0_mpdgctrl0;
+	mmdc0->mpdgctrl1 = calib->p0_mpdgctrl1;
+	mmdc0->mprddlctl = calib->p0_mprddlctl;
+	mmdc0->mpwrdlctl = calib->p0_mpwrdlctl;
+	if (sysinfo->dsize > 1) {
+		MMDC1(mpwldectrl0, calib->p1_mpwldectrl0);
+		MMDC1(mpwldectrl1, calib->p1_mpwldectrl1);
+		MMDC1(mpdgctrl0, calib->p1_mpdgctrl0);
+		MMDC1(mpdgctrl1, calib->p1_mpdgctrl1);
+		MMDC1(mprddlctl, calib->p1_mprddlctl);
+		MMDC1(mpwrdlctl, calib->p1_mpwrdlctl);
+	}
+
+	/* Read data DQ Byte0-3 delay */
+	mmdc0->mprddqby0dl = 0x33333333;
+	mmdc0->mprddqby1dl = 0x33333333;
+	if (sysinfo->dsize > 0) {
+		mmdc0->mprddqby2dl = 0x33333333;
+		mmdc0->mprddqby3dl = 0x33333333;
+	}
+
+	if (sysinfo->dsize > 1) {
+		MMDC1(mprddqby0dl, 0x33333333);
+		MMDC1(mprddqby1dl, 0x33333333);
+		MMDC1(mprddqby2dl, 0x33333333);
+		MMDC1(mprddqby3dl, 0x33333333);
+	}
+
+	/* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
+	val = (sysinfo->rtt_nom == 2) ? 0x00011117 : 0x00022227;
+	mmdc0->mpodtctrl = val;
+	if (sysinfo->dsize > 1)
+		MMDC1(mpodtctrl, val);
+
+	/* complete calibration */
+	val = (1 << 11); /* Force measurement on delay-lines */
+	mmdc0->mpmur0 = val;
+	if (sysinfo->dsize > 1)
+		MMDC1(mpmur0, val);
+
+	/* Step 1: configuration request */
+	mmdc0->mdscr = (u32)(1 << 15); /* config request */
+
+	/* Step 2: Timing configuration */
+	mmdc0->mdcfg0 = (trfc << 24) | (txs << 16) | (txp << 13) |
+			(txpdll << 9) | (tfaw << 4) | tcl;
+	mmdc0->mdcfg1 = (trcd << 29) | (trp << 26) | (trc << 21) |
+			(tras << 16) | (1 << 15) /* trpa */ |
+			(twr << 9) | (tmrd << 5) | tcwl;
+	mmdc0->mdcfg2 = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd;
+	mmdc0->mdotc = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) |
+		       (taxpd << 16) | (todtlon << 12) | (todt_idle_off << 4);
+	mmdc0->mdasp = cs0_end; /* CS addressing */
+
+	/* Step 3: Configure DDR type */
+	mmdc0->mdmisc = (sysinfo->cs1_mirror << 19) | (sysinfo->walat << 16) |
+			(sysinfo->bi_on << 12) | (sysinfo->mif3_mode << 9) |
+			(sysinfo->ralat << 6);
+
+	/* Step 4: Configure delay while leaving reset */
+	mmdc0->mdor = (txpr << 16) | (sysinfo->sde_to_rst << 8) |
+		      (sysinfo->rst_to_cke << 0);
+
+	/* Step 5: Configure DDR physical parameters (density and burst len) */
+	coladdr = ddr3_cfg->coladdr;
+	if (ddr3_cfg->coladdr == 8)		/* 8-bit COL is 0x3 */
+		coladdr += 4;
+	else if (ddr3_cfg->coladdr == 12)	/* 12-bit COL is 0x4 */
+		coladdr += 1;
+	mmdc0->mdctl =  (ddr3_cfg->rowaddr - 11) << 24 |	/* ROW */
+			(coladdr - 9) << 20 |			/* COL */
+			(1 << 19) |		/* Burst Length = 8 for DDR3 */
+			(sysinfo->dsize << 16);		/* DDR data bus size */
+
+	/* Step 6: Perform ZQ calibration */
+	val = 0xa1390001; /* one-time HW ZQ calib */
+	mmdc0->mpzqhwctrl = val;
+	if (sysinfo->dsize > 1)
+		MMDC1(mpzqhwctrl, val);
+
+	/* Step 7: Enable MMDC with desired chip select */
+	mmdc0->mdctl |= (1 << 31) |			     /* SDE_0 for CS0 */
+			((sysinfo->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */
+
+	/* Step 8: Write Mode Registers to Init DDR3 devices */
+	for (cs = 0; cs < sysinfo->ncs; cs++) {
+		/* MR2 */
+		val = (sysinfo->rtt_wr & 3) << 9 | (ddr3_cfg->SRT & 1) << 7 |
+		      ((tcwl - 3) & 3) << 3;
+		debug("MR2 CS%d: 0x%08x\n", cs, (u32)MR(val, 2, 3, cs));
+		mmdc0->mdscr = MR(val, 2, 3, cs);
+		/* MR3 */
+		debug("MR3 CS%d: 0x%08x\n", cs, (u32)MR(0, 3, 3, cs));
+		mmdc0->mdscr = MR(0, 3, 3, cs);
+		/* MR1 */
+		val = ((sysinfo->rtt_nom & 1) ? 1 : 0) << 2 |
+		      ((sysinfo->rtt_nom & 2) ? 1 : 0) << 6;
+		debug("MR1 CS%d: 0x%08x\n", cs, (u32)MR(val, 1, 3, cs));
+		mmdc0->mdscr = MR(val, 1, 3, cs);
+		/* MR0 */
+		val = ((tcl - 1) << 4) |	/* CAS */
+		      (1 << 8)   |		/* DLL Reset */
+		      ((twr - 3) << 9) |	/* Write Recovery */
+		      (sysinfo->pd_fast_exit << 12); /* Precharge PD PLL on */
+		debug("MR0 CS%d: 0x%08x\n", cs, (u32)MR(val, 0, 3, cs));
+		mmdc0->mdscr = MR(val, 0, 3, cs);
+		/* ZQ calibration */
+		val = (1 << 10);
+		mmdc0->mdscr = MR(val, 0, 4, cs);
+	}
+
+	/* Step 10: Power down control and self-refresh */
+	mmdc0->mdpdc = (tcke & 0x7) << 16 |
+			5            << 12 |  /* PWDT_1: 256 cycles */
+			5            <<  8 |  /* PWDT_0: 256 cycles */
+			1            <<  6 |  /* BOTH_CS_PD */
+			(tcksrx & 0x7) << 3 |
+			(tcksre & 0x7);
+	if (!sysinfo->pd_fast_exit)
+		mmdc0->mdpdc |= (1 << 7); /* SLOW_PD */
+	mmdc0->mapsr = 0x00001006; /* ADOPT power down enabled */
+
+	/* Step 11: Configure ZQ calibration: one-time and periodic 1ms */
+	val = 0xa1390003;
+	mmdc0->mpzqhwctrl = val;
+	if (sysinfo->dsize > 1)
+		MMDC1(mpzqhwctrl, val);
+
+	/* Step 12: Configure and activate periodic refresh */
+	mmdc0->mdref = (sysinfo->refsel << 14) | (sysinfo->refr << 11);
+
+	/*
+	 * Step 13: i.MX6DQP only: If the NoC scheduler is enabled,
+	 * configure it and disable MMDC arbitration/reordering (see EB828)
+	 */
+	if (is_mx6dqp() &&
+	    ((soc_boot_cfg3 & BOOT_CFG3_DDR_MASK) == DDR_MMAP_NOC_SINGLE ||
+	    (soc_boot_cfg3 & BOOT_CFG3_EXT_DDR_MASK) == DDR_MMAP_NOC_DUAL)) {
+		struct mx6dqp_noc_sched_regs *noc_sched =
+			(struct mx6dqp_noc_sched_regs *)MX6DQP_NOC_SCHED_BASE;
+
+		/*
+		 * These values are fixed based on integration parameters and
+		 * should not be modified
+		 */
+		noc_sched->rlat = 0x00000040;
+		noc_sched->ipu1 = 0x00000020;
+		noc_sched->ipu2 = 0x00000020;
+
+		noc_sched->activate = (1 << NOC_FAW_BANKS_SHIFT) |
+				      (tfaw << NOC_FAW_PERIOD_SHIFT) |
+				      (trrd << NOC_RD_SHIFT);
+		noc_sched->ddrtiming = (((sysinfo->dsize == 1) ? 1 : 0)
+					 << NOC_BW_RATIO_SHIFT) |
+				       ((tcwl + twtr) << NOC_WR_TO_RD_SHIFT) |
+				       ((tcl - tcwl + 2) << NOC_RD_TO_WR_SHIFT) |
+				       (4 << NOC_BURST_LEN_SHIFT) | /* BL8 */
+				       ((tcwl + twr + trp + trcd)
+					 << NOC_WR_TO_MISS_SHIFT) |
+				       ((trtp + trp + trcd - 4)
+					 << NOC_RD_TO_MISS_SHIFT) |
+				       (trc << NOC_ACT_TO_ACT_SHIFT);
+
+		if (sysinfo->dsize == 2) {
+			if (ddr3_cfg->coladdr == 10) {
+				if (ddr3_cfg->rowaddr == 15 &&
+				    sysinfo->ncs == 2)
+					noc_sched->ddrconf = 4;
+				else
+					noc_sched->ddrconf = 0;
+			} else if (ddr3_cfg->coladdr == 11) {
+				noc_sched->ddrconf = 1;
+			}
+		} else {
+			if (ddr3_cfg->coladdr == 9) {
+				if (ddr3_cfg->rowaddr == 13)
+					noc_sched->ddrconf = 2;
+				else if (ddr3_cfg->rowaddr == 14)
+					noc_sched->ddrconf = 15;
+			} else if (ddr3_cfg->coladdr == 10) {
+				if (ddr3_cfg->rowaddr == 14 &&
+				    sysinfo->ncs == 2)
+					noc_sched->ddrconf = 14;
+				else if (ddr3_cfg->rowaddr == 15 &&
+					 sysinfo->ncs == 2)
+					noc_sched->ddrconf = 9;
+				else
+					noc_sched->ddrconf = 3;
+			} else if (ddr3_cfg->coladdr == 11) {
+				if (ddr3_cfg->rowaddr == 15 &&
+				    sysinfo->ncs == 2)
+					noc_sched->ddrconf = 4;
+				else
+					noc_sched->ddrconf = 0;
+			} else if (ddr3_cfg->coladdr == 12) {
+				if (ddr3_cfg->rowaddr == 14)
+					noc_sched->ddrconf = 1;
+			}
+		}
+
+		/* Disable MMDC arbitration/reordering */
+		mmdc0->maarcr = 0x14420000;
+	}
+
+	/* Step 13: Deassert config request - init complete */
+	mmdc0->mdscr = 0x00000000;
+
+	/* wait for auto-ZQ calibration to complete */
+	mdelay(1);
+}
+
+void mmdc_read_calibration(struct mx6_ddr_sysinfo const *sysinfo,
+                           struct mx6_mmdc_calibration *calib)
+{
+	struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+	struct mmdc_p_regs *mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+
+	calib->p0_mpwldectrl0 = readl(&mmdc0->mpwldectrl0);
+	calib->p0_mpwldectrl1 = readl(&mmdc0->mpwldectrl1);
+	calib->p0_mpdgctrl0 = readl(&mmdc0->mpdgctrl0);
+	calib->p0_mpdgctrl1 = readl(&mmdc0->mpdgctrl1);
+	calib->p0_mprddlctl = readl(&mmdc0->mprddlctl);
+	calib->p0_mpwrdlctl = readl(&mmdc0->mpwrdlctl);
+
+	if (sysinfo->dsize == 2) {
+		calib->p1_mpwldectrl0 = readl(&mmdc1->mpwldectrl0);
+		calib->p1_mpwldectrl1 = readl(&mmdc1->mpwldectrl1);
+		calib->p1_mpdgctrl0 = readl(&mmdc1->mpdgctrl0);
+		calib->p1_mpdgctrl1 = readl(&mmdc1->mpdgctrl1);
+		calib->p1_mprddlctl = readl(&mmdc1->mprddlctl);
+		calib->p1_mpwrdlctl = readl(&mmdc1->mpwrdlctl);
+	}
+}
+
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
+		  const struct mx6_mmdc_calibration *calib,
+		  const void *ddr_cfg)
+{
+	if (sysinfo->ddr_type == DDR_TYPE_DDR3) {
+		mx6_ddr3_cfg(sysinfo, calib, ddr_cfg);
+	} else if (sysinfo->ddr_type == DDR_TYPE_LPDDR2) {
+		mx6_lpddr2_cfg(sysinfo, calib, ddr_cfg);
+	} else {
+		puts("Unsupported ddr type\n");
+		hang();
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/litesom.c b/roms/u-boot/arch/arm/mach-imx/mx6/litesom.c
new file mode 100644
index 000000000..699a3dc31
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/litesom.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2016 Grinn
+ */
+
+#include <init.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6ul_pins.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_esdhc_imx.h>
+#include <linux/delay.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW |		\
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const emmc_pads[] = {
+	MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	/* RST_B */
+	MX6_PAD_NAND_ALE__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+static struct fsl_esdhc_cfg emmc_cfg = {USDHC2_BASE_ADDR, 0, 8};
+
+#define EMMC_PWR_GPIO	IMX_GPIO_NR(4, 10)
+
+int litesom_mmc_init(struct bd_info *bis)
+{
+	int ret;
+
+	/* eMMC */
+	imx_iomux_v3_setup_multiple_pads(emmc_pads, ARRAY_SIZE(emmc_pads));
+	gpio_direction_output(EMMC_PWR_GPIO, 0);
+	udelay(500);
+	gpio_direction_output(EMMC_PWR_GPIO, 1);
+	emmc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
+	ret = fsl_esdhc_initialize(bis, &emmc_cfg);
+	if (ret) {
+		printf("Warning: failed to initialize mmc dev 1 (eMMC)\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#include <linux/libfdt.h>
+#include <spl.h>
+#include <asm/arch/mx6-ddr.h>
+
+
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+	.grp_addds = 0x00000030,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_b0ds = 0x00000030,
+	.grp_ctlds = 0x00000030,
+	.grp_b1ds = 0x00000030,
+	.grp_ddrpke = 0x00000000,
+	.grp_ddrmode = 0x00020000,
+	.grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+	.dram_dqm0 = 0x00000030,
+	.dram_dqm1 = 0x00000030,
+	.dram_ras = 0x00000030,
+	.dram_cas = 0x00000030,
+	.dram_odt0 = 0x00000030,
+	.dram_odt1 = 0x00000030,
+	.dram_sdba2 = 0x00000000,
+	.dram_sdclk_0 = 0x00000030,
+	.dram_sdqs0 = 0x00000030,
+	.dram_sdqs1 = 0x00000030,
+	.dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+	.p0_mpwldectrl0 = 0x00000000,
+	.p0_mpdgctrl0 = 0x41570155,
+	.p0_mprddlctl = 0x4040474A,
+	.p0_mpwrdlctl = 0x40405550,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+	.dsize = 0,
+	.cs_density = 20,
+	.ncs = 1,
+	.cs1_mirror = 0,
+	.rtt_wr = 2,
+	.rtt_nom = 1,		/* RTT_Nom = RZQ/2 */
+	.walat = 0,		/* Write additional latency */
+	.ralat = 5,		/* Read additional latency */
+	.mif3_mode = 3,		/* Command prediction working mode */
+	.bi_on = 1,		/* Bank interleaving enabled */
+	.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
+	.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+	.ddr_type = DDR_TYPE_DDR3,
+	.refsel = 0,		/* Refresh cycles at 64KHz */
+	.refr = 1,		/* 2 refresh commands per refresh cycle */
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+	.mem_speed = 800,
+	.density = 4,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 15,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	writel(0xFFFFFFFF, &ccm->CCGR0);
+	writel(0xFFFFFFFF, &ccm->CCGR1);
+	writel(0xFFFFFFFF, &ccm->CCGR2);
+	writel(0xFFFFFFFF, &ccm->CCGR3);
+	writel(0xFFFFFFFF, &ccm->CCGR4);
+	writel(0xFFFFFFFF, &ccm->CCGR5);
+	writel(0xFFFFFFFF, &ccm->CCGR6);
+	writel(0xFFFFFFFF, &ccm->CCGR7);
+}
+
+static void spl_dram_init(void)
+{
+	unsigned long ram_size;
+
+	mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+	mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+
+	/*
+	 * Get actual RAM size, so we can adjust DDR row size for <512M
+	 * memories
+	 */
+	ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_512M);
+	if (ram_size < SZ_512M) {
+		mem_ddr.rowaddr = 14;
+		mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+	}
+}
+
+void litesom_init_f(void)
+{
+	ccgr_init();
+
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+	board_early_init_f();
+#endif
+
+	/* setup GP timer */
+	timer_init();
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/module_fuse.c b/roms/u-boot/arch/arm/mach-imx/mx6/module_fuse.c
new file mode 100644
index 000000000..0f4565e31
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/module_fuse.c
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/mach-imx/module_fuse.h>
+#include <linux/errno.h>
+
+static struct fuse_entry_desc mx6_fuse_descs[] = {
+#if defined(CONFIG_MX6ULL)
+	{MODULE_TSC, "/soc/aips-bus@2000000/tsc@2040000", 0x430, 22},
+	{MODULE_ADC2, "/soc/aips-bus@2100000/adc@219c000", 0x430, 23},
+	{MODULE_EPDC, "/soc/aips-bus@2200000/epdc@228c000", 0x430, 24},
+	{MODULE_ESAI, "/soc/aips-bus@2000000/spba-bus@2000000/esai@2024000", 0x430, 25},
+	{MODULE_FLEXCAN1, "/soc/aips-bus@2000000/can@2090000", 0x430, 26},
+	{MODULE_FLEXCAN2, "/soc/aips-bus@2000000/can@2094000", 0x430, 27},
+	{MODULE_SPDIF, "/soc/aips-bus@2000000/spba-bus@2000000/spdif@2004000", 0x440, 2},
+	{MODULE_EIM, "/soc/aips-bus@2100000/weim@21b8000", 0x440, 3},
+	{MODULE_SD1, "/soc/aips-bus@2100000/usdhc@2190000", 0x440, 4},
+	{MODULE_SD2, "/soc/aips-bus@2100000/usdhc@2194000", 0x440, 5},
+	{MODULE_QSPI1, "/soc/aips-bus@2100000/qspi@21e0000", 0x440, 6},
+	{MODULE_GPMI, "/soc/gpmi-nand@1806000", 0x440, 7},
+	{MODULE_APBHDMA, "/soc/dma-apbh@1804000", 0x440, 7},
+	{MODULE_LCDIF, "/soc/aips-bus@2100000/lcdif@21c8000", 0x440, 8},
+	{MODULE_PXP, "/soc/aips-bus@2100000/pxp@21cc000", 0x440, 9},
+	{MODULE_CSI, "/soc/aips-bus@2100000/csi@21c4000", 0x440, 10},
+	{MODULE_ADC1, "/soc/aips-bus@2100000/adc@2198000", 0x440, 11},
+	{MODULE_ENET1, "/soc/aips-bus@2100000/ethernet@2188000", 0x440, 12},
+	{MODULE_ENET2, "/soc/aips-bus@2000000/ethernet@20b4000", 0x440, 13},
+	{MODULE_DCP, "/soc/aips-bus@2200000/dcp@2280000", 0x440, 14},
+	{MODULE_USB_OTG2, "/soc/aips-bus@2100000/usb@2184200", 0x440, 15},
+	{MODULE_SAI2, "/soc/aips-bus@2000000/spba-bus@2000000/sai@202c000", 0x440, 24},
+	{MODULE_SAI3, "/soc/aips-bus@2000000/spba-bus@2000000/sai@2030000", 0x440, 24},
+	{MODULE_DCP_CRYPTO, "/soc/aips-bus@2200000/dcp@2280000", 0x440, 25},
+	{MODULE_UART5, "/soc/aips-bus@2100000/serial@21f4000", 0x440, 26},
+	{MODULE_UART6, "/soc/aips-bus@2100000/serial@21fc000", 0x440, 26},
+	{MODULE_UART7, "/soc/aips-bus@2000000/spba-bus@2000000/serial@2018000", 0x440, 26},
+	{MODULE_UART8, "/soc/aips-bus@2200000/serial@2288000", 0x440, 26},
+	{MODULE_PWM5, "/soc/aips-bus@2000000/pwm@20f0000", 0x440, 27},
+	{MODULE_PWM6, "/soc/aips-bus@2000000/pwm@20f4000", 0x440, 27},
+	{MODULE_PWM7, "/soc/aips-bus@2000000/pwm@20f8000", 0x440, 27},
+	{MODULE_PWM8, "/soc/aips-bus@2000000/pwm@20fc000", 0x440, 27},
+	{MODULE_ECSPI3, "/soc/aips-bus@2000000/spba-bus@2000000/ecspi@2010000", 0x440, 28},
+	{MODULE_ECSPI4, "/soc/aips-bus@2000000/spba-bus@2000000/ecspi@2014000", 0x440, 28},
+	{MODULE_I2C3, "/soc/aips-bus@2100000/i2c@21a8000", 0x440, 29},
+	{MODULE_I2C4, "/soc/aips-bus@2100000/i2c@21f8000", 0x440, 29},
+	{MODULE_GPT2, "/soc/aips-bus@2000000/gpt@20e8000", 0x440, 30},
+	{MODULE_EPIT2, "/soc/aips-bus@2000000/epit@20d4000", 0x440, 31},
+	/* Paths for older imx tree: */
+	{MODULE_TSC, "/soc/aips-bus@02000000/tsc@02040000", 0x430, 22},
+	{MODULE_ADC2, "/soc/aips-bus@02100000/adc@0219c000", 0x430, 23},
+	{MODULE_EPDC, "/soc/aips-bus@02200000/epdc@0228c000", 0x430, 24},
+	{MODULE_ESAI, "/soc/aips-bus@02000000/spba-bus@02000000/esai@02024000", 0x430, 25},
+	{MODULE_FLEXCAN1, "/soc/aips-bus@02000000/can@02090000", 0x430, 26},
+	{MODULE_FLEXCAN2, "/soc/aips-bus@02000000/can@02094000", 0x430, 27},
+	{MODULE_SPDIF, "/soc/aips-bus@02000000/spba-bus@02000000/spdif@02004000", 0x440, 2},
+	{MODULE_EIM, "/soc/aips-bus@02100000/weim@021b8000", 0x440, 3},
+	{MODULE_SD1, "/soc/aips-bus@02100000/usdhc@02190000", 0x440, 4},
+	{MODULE_SD2, "/soc/aips-bus@02100000/usdhc@02194000", 0x440, 5},
+	{MODULE_QSPI1, "/soc/aips-bus@02100000/qspi@021e0000", 0x440, 6},
+	{MODULE_GPMI, "/soc/gpmi-nand@01806000", 0x440, 7},
+	{MODULE_APBHDMA, "/soc/dma-apbh@01804000", 0x440, 7},
+	{MODULE_LCDIF, "/soc/aips-bus@02100000/lcdif@021c8000", 0x440, 8},
+	{MODULE_PXP, "/soc/aips-bus@02100000/pxp@021cc000", 0x440, 9},
+	{MODULE_CSI, "/soc/aips-bus@02100000/csi@021c4000", 0x440, 10},
+	{MODULE_ADC1, "/soc/aips-bus@02100000/adc@02198000", 0x440, 11},
+	{MODULE_ENET1, "/soc/aips-bus@02100000/ethernet@02188000", 0x440, 12},
+	{MODULE_ENET2, "/soc/aips-bus@02000000/ethernet@020b4000", 0x440, 13},
+	{MODULE_DCP, "/soc/aips-bus@02200000/dcp@02280000", 0x440, 14},
+	{MODULE_USB_OTG2, "/soc/aips-bus@02100000/usb@02184200", 0x440, 15},
+	{MODULE_SAI2, "/soc/aips-bus@02000000/spba-bus@02000000/sai@0202c000", 0x440, 24},
+	{MODULE_SAI3, "/soc/aips-bus@02000000/spba-bus@02000000/sai@02030000", 0x440, 24},
+	{MODULE_DCP_CRYPTO, "/soc/aips-bus@02200000/dcp@02280000", 0x440, 25},
+	{MODULE_UART5, "/soc/aips-bus@02100000/serial@021f4000", 0x440, 26},
+	{MODULE_UART6, "/soc/aips-bus@02100000/serial@021fc000", 0x440, 26},
+	{MODULE_UART7, "/soc/aips-bus@02000000/spba-bus@02000000/serial@02018000", 0x440, 26},
+	{MODULE_UART8, "/soc/aips-bus@02200000/serial@02288000", 0x440, 26},
+	{MODULE_PWM5, "/soc/aips-bus@02000000/pwm@020f0000", 0x440, 27},
+	{MODULE_PWM6, "/soc/aips-bus@02000000/pwm@020f4000", 0x440, 27},
+	{MODULE_PWM7, "/soc/aips-bus@02000000/pwm@020f8000", 0x440, 27},
+	{MODULE_PWM8, "/soc/aips-bus@02000000/pwm@020fc000", 0x440, 27},
+	{MODULE_ECSPI3, "/soc/aips-bus@02000000/spba-bus@02000000/ecspi@02010000", 0x440, 28},
+	{MODULE_ECSPI4, "/soc/aips-bus@02000000/spba-bus@02000000/ecspi@02014000", 0x440, 28},
+	{MODULE_I2C3, "/soc/aips-bus@02100000/i2c@021a8000", 0x440, 29},
+	{MODULE_I2C4, "/soc/aips-bus@02100000/i2c@021f8000", 0x440, 29},
+	{MODULE_GPT2, "/soc/aips-bus@02000000/gpt@020e8000", 0x440, 30},
+	{MODULE_EPIT2, "/soc/aips-bus@02000000/epit@020d4000", 0x440, 31},
+#elif defined(CONFIG_MX6UL)
+	{MODULE_TSC, "/soc/aips-bus@2000000/tsc@2040000", 0x430, 22},
+	{MODULE_ADC2, "/soc/aips-bus@2100000/adc@219c000", 0x430, 23},
+	{MODULE_SIM1, "/soc/aips-bus@2100000/sim@218c000", 0x430, 24},
+	{MODULE_SIM2, "/soc/aips-bus@2100000/sim@21b4000", 0x430, 25},
+	{MODULE_FLEXCAN1, "/soc/aips-bus@2000000/can@2090000", 0x430, 26},
+	{MODULE_FLEXCAN2, "/soc/aips-bus@2000000/can@2094000", 0x430, 27},
+	{MODULE_SPDIF, "/soc/aips-bus@2000000/spba-bus@2000000/spdif@2004000", 0x440, 2},
+	{MODULE_EIM, "/soc/aips-bus@2100000/weim@21b8000", 0x440, 3},
+	{MODULE_SD1, "/soc/aips-bus@2100000/usdhc@2190000", 0x440, 4},
+	{MODULE_SD2, "/soc/aips-bus@2100000/usdhc@2194000", 0x440, 5},
+	{MODULE_QSPI1, "/soc/aips-bus@2100000/qspi@21e0000", 0x440, 6},
+	{MODULE_GPMI, "/soc/gpmi-nand@1806000", 0x440, 7},
+	{MODULE_APBHDMA, "/soc/dma-apbh@1804000", 0x440, 7},
+	{MODULE_LCDIF, "/soc/aips-bus@2100000/lcdif@21c8000", 0x440, 8},
+	{MODULE_PXP, "/soc/aips-bus@2100000/pxp@21cc000", 0x440, 9},
+	{MODULE_CSI, "/soc/aips-bus@2100000/csi@21c4000", 0x440, 10},
+	{MODULE_ADC1, "/soc/aips-bus@2100000/adc@2198000", 0x440, 11},
+	{MODULE_ENET1, "/soc/aips-bus@2100000/ethernet@2188000", 0x440, 12},
+	{MODULE_ENET2, "/soc/aips-bus@2000000/ethernet@20b4000", 0x440, 13},
+	{MODULE_CAAM, "/soc/aips-bus@2100000/caam@2140000", 0x440, 14},
+	{MODULE_USB_OTG2, "/soc/aips-bus@2100000/usb@2184200", 0x440, 15},
+	{MODULE_SAI2, "/soc/aips-bus@2000000/spba-bus@2000000/sai@202c000", 0x440, 24},
+	{MODULE_SAI3, "/soc/aips-bus@2000000/spba-bus@2000000/sai@2030000", 0x440, 24},
+	{MODULE_BEE, "/soc/aips-bus@2000000/bee@2044000", 0x440, 25},
+	{MODULE_UART5, "/soc/aips-bus@2100000/serial@21f4000", 0x440, 26},
+	{MODULE_UART6, "/soc/aips-bus@2100000/serial@21fc000", 0x440, 26},
+	{MODULE_UART7, "/soc/aips-bus@2000000/spba-bus@2000000/serial@2018000", 0x440, 26},
+	{MODULE_UART8, "/soc/aips-bus@2000000/spba-bus@2000000/serial@2024000", 0x440, 26},
+	{MODULE_PWM5, "/soc/aips-bus@2000000/pwm@20f0000", 0x440, 27},
+	{MODULE_PWM6, "/soc/aips-bus@2000000/pwm@20f4000", 0x440, 27},
+	{MODULE_PWM7, "/soc/aips-bus@2000000/pwm@20f8000", 0x440, 27},
+	{MODULE_PWM8, "/soc/aips-bus@2000000/pwm@20fc000", 0x440, 27},
+	{MODULE_ECSPI3, "/soc/aips-bus@2000000/spba-bus@2000000/ecspi@2010000", 0x440, 28},
+	{MODULE_ECSPI4, "/soc/aips-bus@2000000/spba-bus@2000000/ecspi@2014000", 0x440, 28},
+	{MODULE_I2C3, "/soc/aips-bus@2100000/i2c@21a8000", 0x440, 29},
+	{MODULE_I2C4, "/soc/aips-bus@2100000/i2c@21f8000", 0x440, 29},
+	{MODULE_GPT2, "/soc/aips-bus@2000000/gpt@20e8000", 0x440, 30},
+	{MODULE_EPIT2, "/soc/aips-bus@2000000/epit@20d4000", 0x440, 31},
+	/* Paths for older imx tree: */
+	{MODULE_TSC, "/soc/aips-bus@02000000/tsc@02040000", 0x430, 22},
+	{MODULE_ADC2, "/soc/aips-bus@02100000/adc@0219c000", 0x430, 23},
+	{MODULE_SIM1, "/soc/aips-bus@02100000/sim@0218c000", 0x430, 24},
+	{MODULE_SIM2, "/soc/aips-bus@02100000/sim@021b4000", 0x430, 25},
+	{MODULE_FLEXCAN1, "/soc/aips-bus@02000000/can@02090000", 0x430, 26},
+	{MODULE_FLEXCAN2, "/soc/aips-bus@02000000/can@02094000", 0x430, 27},
+	{MODULE_SPDIF, "/soc/aips-bus@02000000/spba-bus@02000000/spdif@02004000", 0x440, 2},
+	{MODULE_EIM, "/soc/aips-bus@02100000/weim@021b8000", 0x440, 3},
+	{MODULE_SD1, "/soc/aips-bus@02100000/usdhc@02190000", 0x440, 4},
+	{MODULE_SD2, "/soc/aips-bus@02100000/usdhc@02194000", 0x440, 5},
+	{MODULE_QSPI1, "/soc/aips-bus@02100000/qspi@021e0000", 0x440, 6},
+	{MODULE_GPMI, "/soc/gpmi-nand@01806000", 0x440, 7},
+	{MODULE_APBHDMA, "/soc/dma-apbh@01804000", 0x440, 7},
+	{MODULE_LCDIF, "/soc/aips-bus@02100000/lcdif@021c8000", 0x440, 8},
+	{MODULE_PXP, "/soc/aips-bus@02100000/pxp@021cc000", 0x440, 9},
+	{MODULE_CSI, "/soc/aips-bus@02100000/csi@021c4000", 0x440, 10},
+	{MODULE_ADC1, "/soc/aips-bus@02100000/adc@02198000", 0x440, 11},
+	{MODULE_ENET1, "/soc/aips-bus@02100000/ethernet@02188000", 0x440, 12},
+	{MODULE_ENET2, "/soc/aips-bus@02000000/ethernet@020b4000", 0x440, 13},
+	{MODULE_CAAM, "/soc/aips-bus@02100000/caam@2140000", 0x440, 14},
+	{MODULE_USB_OTG2, "/soc/aips-bus@02100000/usb@02184200", 0x440, 15},
+	{MODULE_SAI2, "/soc/aips-bus@02000000/spba-bus@02000000/sai@0202c000", 0x440, 24},
+	{MODULE_SAI3, "/soc/aips-bus@02000000/spba-bus@02000000/sai@02030000", 0x440, 24},
+	{MODULE_BEE, "/soc/aips-bus@02000000/bee@02044000", 0x440, 25},
+	{MODULE_UART5, "/soc/aips-bus@02100000/serial@021f4000", 0x440, 26},
+	{MODULE_UART6, "/soc/aips-bus@02100000/serial@021fc000", 0x440, 26},
+	{MODULE_UART7, "/soc/aips-bus@02000000/spba-bus@02000000/serial@02018000", 0x440, 26},
+	{MODULE_UART8, "/soc/aips-bus@02000000/spba-bus@02000000/serial@02024000", 0x440, 26},
+	{MODULE_PWM5, "/soc/aips-bus@02000000/pwm@020f0000", 0x440, 27},
+	{MODULE_PWM6, "/soc/aips-bus@02000000/pwm@020f4000", 0x440, 27},
+	{MODULE_PWM7, "/soc/aips-bus@02000000/pwm@020f8000", 0x440, 27},
+	{MODULE_PWM8, "/soc/aips-bus@02000000/pwm@020fc000", 0x440, 27},
+	{MODULE_ECSPI3, "/soc/aips-bus@02000000/spba-bus@02000000/ecspi@02010000", 0x440, 28},
+	{MODULE_ECSPI4, "/soc/aips-bus@02000000/spba-bus@02000000/ecspi@02014000", 0x440, 28},
+	{MODULE_I2C3, "/soc/aips-bus@02100000/i2c@021a8000", 0x440, 29},
+	{MODULE_I2C4, "/soc/aips-bus@02100000/i2c@021f8000", 0x440, 29},
+	{MODULE_GPT2, "/soc/aips-bus@02000000/gpt@020e8000", 0x440, 30},
+	{MODULE_EPIT2, "/soc/aips-bus@02000000/epit@020d4000", 0x440, 31},
+#endif
+};
+
+u32 check_module_fused(enum fuse_module_type module)
+{
+	u32 i, reg;
+
+	for (i = 0; i < ARRAY_SIZE(mx6_fuse_descs); i++) {
+		if (mx6_fuse_descs[i].module == module) {
+			reg = readl(OCOTP_BASE_ADDR +
+				    mx6_fuse_descs[i].fuse_word_offset);
+			if (reg & BIT(mx6_fuse_descs[i].fuse_bit_offset))
+				return 1; /* disabled */
+			else
+				return 0; /* enabled */
+		}
+	}
+
+	return  0; /* Not has a fuse, always enabled */
+}
+
+#ifdef CONFIG_OF_SYSTEM_SETUP
+int ft_system_setup(void *blob, struct bd_info *bd)
+{
+	const char *status = "disabled";
+	u32 i, reg;
+	int rc, off;
+
+	for (i = 0; i < ARRAY_SIZE(mx6_fuse_descs); i++) {
+		reg = readl(OCOTP_BASE_ADDR +
+			    mx6_fuse_descs[i].fuse_word_offset);
+		if (reg & BIT(mx6_fuse_descs[i].fuse_bit_offset)) {
+			off = fdt_path_offset(blob,
+					      mx6_fuse_descs[i].node_path);
+
+			if (off < 0)
+				continue; /* Not found, skip it */
+add_status:
+			rc = fdt_setprop(blob, nodeoff, "status", status,
+					 strlen(status) + 1);
+			if (rc) {
+				if (rc == -FDT_ERR_NOSPACE) {
+					rc = fdt_increase_size(blob, 512);
+					if (!rc)
+						goto add_status;
+				}
+				printf("Unable to update property %s:%s, err=%s\n", mx6_fuse_descs[i].node_path, "status", fdt_strerror(rc));
+			} else {
+				printf("Modify %s disabled\n", mx6_fuse_descs[i].node_path);
+			}
+		}
+	}
+
+	return 0;
+}
+#endif
+
+u32 esdhc_fused(ulong base_addr)
+{
+	switch (base_addr) {
+	case USDHC1_BASE_ADDR:
+		return check_module_fused(MODULE_SD1);
+	case USDHC2_BASE_ADDR:
+		return check_module_fused(MODULE_SD2);
+#ifdef USDHC3_BASE_ADDR
+	case USDHC3_BASE_ADDR:
+		return check_module_fused(MODULE_SD3);
+#endif
+#ifdef USDHC4_BASE_ADDR
+	case USDHC4_BASE_ADDR:
+		return check_module_fused(MODULE_SD4);
+#endif
+	default:
+		return 0;
+	}
+}
+
+u32 ecspi_fused(ulong base_addr)
+{
+	switch (base_addr) {
+	case ECSPI1_BASE_ADDR:
+		return check_module_fused(MODULE_ECSPI1);
+	case ECSPI2_BASE_ADDR:
+		return check_module_fused(MODULE_ECSPI2);
+	case ECSPI3_BASE_ADDR:
+		return check_module_fused(MODULE_ECSPI3);
+	case ECSPI4_BASE_ADDR:
+		return check_module_fused(MODULE_ECSPI4);
+#ifdef ECSPI5_BASE_ADDR
+	case ECSPI5_BASE_ADDR:
+		return check_module_fused(MODULE_ECSPI5);
+#endif
+	default:
+		return 0;
+	}
+}
+
+u32 usb_fused(ulong base_addr)
+{
+	int i = (base_addr - USB_BASE_ADDR) / 0x200;
+
+	return check_module_fused(MODULE_USB_OTG1 + i);
+}
+
+u32 qspi_fused(ulong base_addr)
+{
+	switch (base_addr) {
+#ifdef QSPI1_BASE_ADDR
+	case QSPI1_BASE_ADDR:
+		return check_module_fused(MODULE_QSPI1);
+#endif
+
+#ifdef QSPI2_BASE_ADDR
+	case QSPI2_BASE_ADDR:
+		return check_module_fused(MODULE_QSPI2);
+#endif
+	default:
+		return 0;
+	}
+}
+
+u32 i2c_fused(ulong base_addr)
+{
+	switch (base_addr) {
+	case I2C1_BASE_ADDR:
+		return check_module_fused(MODULE_I2C1);
+	case I2C2_BASE_ADDR:
+		return check_module_fused(MODULE_I2C2);
+	case I2C3_BASE_ADDR:
+		return check_module_fused(MODULE_I2C3);
+#ifdef I2C4_BASE_ADDR
+	case I2C4_BASE_ADDR:
+		return check_module_fused(MODULE_I2C4);
+#endif
+	}
+
+	return 0;
+}
+
+u32 enet_fused(ulong base_addr)
+{
+	switch (base_addr) {
+	case ENET_BASE_ADDR:
+		return check_module_fused(MODULE_ENET1);
+#ifdef ENET2_BASE_ADDR
+	case ENET2_BASE_ADDR:
+		return check_module_fused(MODULE_ENET2);
+#endif
+	default:
+		return 0;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/mp.c b/roms/u-boot/arch/arm/mach-imx/mx6/mp.c
new file mode 100644
index 000000000..2fdf070a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/mp.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014
+ * Gabriel Huau <contact@huau-gabriel.fr>
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/imx-regs.h>
+
+#define MAX_CPUS 4
+static struct src *src = (struct src *)SRC_BASE_ADDR;
+
+static uint32_t cpu_reset_mask[MAX_CPUS] = {
+	0, /* We don't really want to modify the cpu0 */
+	SRC_SCR_CORE_1_RESET_MASK,
+	SRC_SCR_CORE_2_RESET_MASK,
+	SRC_SCR_CORE_3_RESET_MASK
+};
+
+static uint32_t cpu_ctrl_mask[MAX_CPUS] = {
+	0, /* We don't really want to modify the cpu0 */
+	SRC_SCR_CORE_1_ENABLE_MASK,
+	SRC_SCR_CORE_2_ENABLE_MASK,
+	SRC_SCR_CORE_3_ENABLE_MASK
+};
+
+int cpu_reset(u32 nr)
+{
+	/* Software reset of the CPU N */
+	src->scr |= cpu_reset_mask[nr];
+	return 0;
+}
+
+int cpu_status(u32 nr)
+{
+	printf("core %d => %d\n", nr, !!(src->scr & cpu_ctrl_mask[nr]));
+	return 0;
+}
+
+int cpu_release(u32 nr, int argc, char *const argv[])
+{
+	uint32_t boot_addr;
+
+	boot_addr = simple_strtoul(argv[0], NULL, 16);
+
+	switch (nr) {
+	case 1:
+		src->gpr3 = boot_addr;
+		break;
+	case 2:
+		src->gpr5 = boot_addr;
+		break;
+	case 3:
+		src->gpr7 = boot_addr;
+		break;
+	default:
+		return 1;
+	}
+
+	/* CPU N is ready to start */
+	src->scr |= cpu_ctrl_mask[nr];
+
+	return 0;
+}
+
+int is_core_valid(unsigned int core)
+{
+	uint32_t nr_cores = get_nr_cpus();
+
+	if (core > nr_cores)
+		return 0;
+
+	return 1;
+}
+
+int cpu_disable(u32 nr)
+{
+	/* Disable the CPU N */
+	src->scr &= ~cpu_ctrl_mask[nr];
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/opos6ul.c b/roms/u-boot/arch/arm/mach-imx/mx6/opos6ul.c
new file mode 100644
index 000000000..e9d78740a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/opos6ul.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Armadeus Systems
+ */
+
+#include <init.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <common.h>
+#include <env.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_FEC_MXC
+#include <miiphy.h>
+
+int board_phy_config(struct phy_device *phydev)
+{
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+
+static int setup_fec(void)
+{
+	struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	/* Use 50M anatop loopback REF_CLK1 for ENET1,
+	 * clear gpr1[13], set gpr1[17] */
+	clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK,
+			IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK);
+
+	return enable_fec_anatop_clock(0, ENET_50MHZ);
+}
+#endif /* CONFIG_FEC_MXC */
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+	return 0;
+}
+
+int __weak opos6ul_board_late_init(void)
+{
+	return 0;
+}
+
+int board_late_init(void)
+{
+	struct src *psrc = (struct src *)SRC_BASE_ADDR;
+	unsigned reg = readl(&psrc->sbmr2);
+
+	/* In bootstrap don't use the env vars */
+	if (((reg & 0x3000000) >> 24) == 0x1) {
+		env_set_default(NULL, 0);
+		env_set("preboot", "");
+	}
+
+	return opos6ul_board_late_init();
+}
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#include <asm/arch/mx6-ddr.h>
+#include <linux/libfdt.h>
+#include <spl.h>
+
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+	.grp_addds = 0x00000030,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_b0ds = 0x00000030,
+	.grp_ctlds = 0x00000030,
+	.grp_b1ds = 0x00000030,
+	.grp_ddrpke = 0x00000000,
+	.grp_ddrmode = 0x00020000,
+	.grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+	.dram_dqm0 = 0x00000030,
+	.dram_dqm1 = 0x00000030,
+	.dram_ras = 0x00000030,
+	.dram_cas = 0x00000030,
+	.dram_odt0 = 0x00000030,
+	.dram_odt1 = 0x00000030,
+	.dram_sdba2 = 0x00000000,
+	.dram_sdclk_0 = 0x00000008,
+	.dram_sdqs0 = 0x00000038,
+	.dram_sdqs1 = 0x00000030,
+	.dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+	.p0_mpwldectrl0 = 0x00070007,
+	.p0_mpdgctrl0 = 0x41490145,
+	.p0_mprddlctl = 0x40404546,
+	.p0_mpwrdlctl = 0x4040524D,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+	.dsize = 0,
+	.cs_density = 20,
+	.ncs = 1,
+	.cs1_mirror = 0,
+	.rtt_wr = 2,
+	.rtt_nom = 1,		/* RTT_Nom = RZQ/2 */
+	.walat = 1,		/* Write additional latency */
+	.ralat = 5,		/* Read additional latency */
+	.mif3_mode = 3,		/* Command prediction working mode */
+	.bi_on = 1,		/* Bank interleaving enabled */
+	.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
+	.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+	.ddr_type = DDR_TYPE_DDR3,
+	.refsel = 1,		/* Refresh cycles at 32KHz */
+	.refr = 7,		/* 8 refreshes commands per refresh cycle */
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+	.mem_speed = 800,
+	.density = 2,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 14,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1500,
+	.trcmin = 5250,
+	.trasmin = 3750,
+};
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	unsigned int bmode = readl(&src_base->sbmr2);
+
+	if (((bmode >> 24) & 0x03) == 0x01) /* Serial Downloader */
+		spl_boot_list[0] = BOOT_DEVICE_UART;
+	else
+		spl_boot_list[0] = spl_boot_device();
+}
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	writel(0xFFFFFFFF, &ccm->CCGR0);
+	writel(0xFFFFFFFF, &ccm->CCGR1);
+	writel(0xFFFFFFFF, &ccm->CCGR2);
+	writel(0xFFFFFFFF, &ccm->CCGR3);
+	writel(0xFFFFFFFF, &ccm->CCGR4);
+	writel(0xFFFFFFFF, &ccm->CCGR5);
+	writel(0xFFFFFFFF, &ccm->CCGR6);
+	writel(0xFFFFFFFF, &ccm->CCGR7);
+}
+
+static void spl_dram_init(void)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[4];
+	struct fuse_bank4_regs *fuse =
+		(struct fuse_bank4_regs *)bank->fuse_regs;
+	int reg = readl(&fuse->gp1);
+
+	/* 512MB of RAM */
+	if (reg & 0x1) {
+		mem_ddr.density = 4;
+		mem_ddr.rowaddr = 15;
+		mem_ddr.trcd = 1375;
+		mem_ddr.trcmin = 4875;
+		mem_ddr.trasmin = 3500;
+	}
+
+	mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+	mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+}
+
+void spl_board_init(void)
+{
+	preloader_console_init();
+}
+
+void board_init_f(ulong dummy)
+{
+	ccgr_init();
+
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+	/* setup GP timer */
+	timer_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+}
+#endif /* CONFIG_SPL_BUILD */
diff --git a/roms/u-boot/arch/arm/mach-imx/mx6/soc.c b/roms/u-boot/arch/arm/mach-imx/mx6/soc.c
new file mode 100644
index 000000000..aacfc854a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx6/soc.c
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <env.h>
+#include <init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/bootm.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/dma.h>
+#include <asm/mach-imx/hab.h>
+#include <stdbool.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/crm_regs.h>
+#include <dm.h>
+#include <fsl_sec.h>
+#include <imx_thermal.h>
+#include <mmc.h>
+
+#define has_err007805() \
+	(is_mx6sl() || is_mx6dl() || is_mx6solo() || is_mx6ull())
+
+struct scu_regs {
+	u32	ctrl;
+	u32	config;
+	u32	status;
+	u32	invalidate;
+	u32	fpga_rev;
+};
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX_THERMAL)
+static const struct imx_thermal_plat imx6_thermal_plat = {
+	.regs = (void *)ANATOP_BASE_ADDR,
+	.fuse_bank = 1,
+	.fuse_word = 6,
+};
+
+U_BOOT_DRVINFO(imx6_thermal) = {
+	.name = "imx_thermal",
+	.plat = &imx6_thermal_plat,
+};
+#endif
+
+#if defined(CONFIG_IMX_HAB)
+struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
+	.bank = 0,
+	.word = 6,
+};
+#endif
+
+u32 get_nr_cpus(void)
+{
+	struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
+	return readl(&scu->config) & 3;
+}
+
+u32 get_cpu_rev(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	u32 reg = readl(&anatop->digprog_sololite);
+	u32 type = ((reg >> 16) & 0xff);
+	u32 major, cfg = 0;
+
+	if (type != MXC_CPU_MX6SL) {
+		reg = readl(&anatop->digprog);
+		struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
+		cfg = readl(&scu->config) & 3;
+		type = ((reg >> 16) & 0xff);
+		if (type == MXC_CPU_MX6DL) {
+			if (!cfg)
+				type = MXC_CPU_MX6SOLO;
+		}
+
+		if (type == MXC_CPU_MX6Q) {
+			if (cfg == 1)
+				type = MXC_CPU_MX6D;
+		}
+
+		if (type == MXC_CPU_MX6ULL) {
+			if (readl(SRC_BASE_ADDR + 0x1c) & (1 << 6))
+				type = MXC_CPU_MX6ULZ;
+		}
+	}
+	major = ((reg >> 8) & 0xff);
+	if ((major >= 1) &&
+	    ((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) {
+		major--;
+		type = MXC_CPU_MX6QP;
+		if (cfg == 1)
+			type = MXC_CPU_MX6DP;
+	}
+	reg &= 0xff;		/* mx6 silicon revision */
+
+	/* For 6DQ, the value 0x00630005 is Silicon revision 1.3*/
+	if (((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D)) && (reg == 0x5))
+		reg = 0x3;
+
+	return (type << 12) | (reg + (0x10 * (major + 1)));
+}
+
+/*
+ * OCOTP_CFG3[17:16] (see Fusemap Description Table offset 0x440)
+ * defines a 2-bit SPEED_GRADING
+ */
+#define OCOTP_CFG3_SPEED_SHIFT	16
+#define OCOTP_CFG3_SPEED_800MHZ	0
+#define OCOTP_CFG3_SPEED_850MHZ	1
+#define OCOTP_CFG3_SPEED_1GHZ	2
+#define OCOTP_CFG3_SPEED_1P2GHZ	3
+
+/*
+ * For i.MX6UL
+ */
+#define OCOTP_CFG3_SPEED_528MHZ 1
+#define OCOTP_CFG3_SPEED_696MHZ 2
+
+/*
+ * For i.MX6ULL
+ */
+#define OCOTP_CFG3_SPEED_792MHZ 2
+#define OCOTP_CFG3_SPEED_900MHZ 3
+
+u32 get_cpu_speed_grade_hz(void)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[0];
+	struct fuse_bank0_regs *fuse =
+		(struct fuse_bank0_regs *)bank->fuse_regs;
+	uint32_t val;
+
+	val = readl(&fuse->cfg3);
+	val >>= OCOTP_CFG3_SPEED_SHIFT;
+	val &= 0x3;
+
+	if (is_mx6ul()) {
+		if (val == OCOTP_CFG3_SPEED_528MHZ)
+			return 528000000;
+		else if (val == OCOTP_CFG3_SPEED_696MHZ)
+			return 696000000;
+		else
+			return 0;
+	}
+
+	if (is_mx6ull()) {
+		if (val == OCOTP_CFG3_SPEED_528MHZ)
+			return 528000000;
+		else if (val == OCOTP_CFG3_SPEED_792MHZ)
+			return 792000000;
+		else if (val == OCOTP_CFG3_SPEED_900MHZ)
+			return 900000000;
+		else
+			return 0;
+	}
+
+	switch (val) {
+	/* Valid for IMX6DQ */
+	case OCOTP_CFG3_SPEED_1P2GHZ:
+		if (is_mx6dq() || is_mx6dqp())
+			return 1200000000;
+	/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
+	case OCOTP_CFG3_SPEED_1GHZ:
+		return 996000000;
+	/* Valid for IMX6DQ */
+	case OCOTP_CFG3_SPEED_850MHZ:
+		if (is_mx6dq() || is_mx6dqp())
+			return 852000000;
+	/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
+	case OCOTP_CFG3_SPEED_800MHZ:
+		return 792000000;
+	}
+	return 0;
+}
+
+/*
+ * OCOTP_MEM0[7:6] (see Fusemap Description Table offset 0x480)
+ * defines a 2-bit Temperature Grade
+ *
+ * return temperature grade and min/max temperature in Celsius
+ */
+#define OCOTP_MEM0_TEMP_SHIFT          6
+
+u32 get_cpu_temp_grade(int *minc, int *maxc)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	uint32_t val;
+
+	val = readl(&fuse->mem0);
+	val >>= OCOTP_MEM0_TEMP_SHIFT;
+	val &= 0x3;
+
+	if (minc && maxc) {
+		if (val == TEMP_AUTOMOTIVE) {
+			*minc = -40;
+			*maxc = 125;
+		} else if (val == TEMP_INDUSTRIAL) {
+			*minc = -40;
+			*maxc = 105;
+		} else if (val == TEMP_EXTCOMMERCIAL) {
+			*minc = -20;
+			*maxc = 105;
+		} else {
+			*minc = 0;
+			*maxc = 95;
+		}
+	}
+	return val;
+}
+
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	u32 cpurev = get_cpu_rev();
+	u32 type = ((cpurev >> 12) & 0xff);
+	if (type == MXC_CPU_MX6SOLO)
+		cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF);
+
+	if (type == MXC_CPU_MX6D)
+		cpurev = (MXC_CPU_MX6Q) << 12 | (cpurev & 0xFFF);
+
+	return cpurev;
+}
+#endif
+
+static void clear_ldo_ramp(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	int reg;
+
+	/* ROM may modify LDO ramp up time according to fuse setting, so in
+	 * order to be in the safe side we neeed to reset these settings to
+	 * match the reset value: 0'b00
+	 */
+	reg = readl(&anatop->ana_misc2);
+	reg &= ~(0x3f << 24);
+	writel(reg, &anatop->ana_misc2);
+}
+
+/*
+ * Set the PMU_REG_CORE register
+ *
+ * Set LDO_SOC/PU/ARM regulators to the specified millivolt level.
+ * Possible values are from 0.725V to 1.450V in steps of
+ * 0.025V (25mV).
+ */
+int set_ldo_voltage(enum ldo_reg ldo, u32 mv)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	u32 val, step, old, reg = readl(&anatop->reg_core);
+	u8 shift;
+
+	/* No LDO_SOC/PU/ARM */
+	if (is_mx6sll())
+		return 0;
+
+	if (mv < 725)
+		val = 0x00;	/* Power gated off */
+	else if (mv > 1450)
+		val = 0x1F;	/* Power FET switched full on. No regulation */
+	else
+		val = (mv - 700) / 25;
+
+	clear_ldo_ramp();
+
+	switch (ldo) {
+	case LDO_SOC:
+		shift = 18;
+		break;
+	case LDO_PU:
+		shift = 9;
+		break;
+	case LDO_ARM:
+		shift = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	old = (reg & (0x1F << shift)) >> shift;
+	step = abs(val - old);
+	if (step == 0)
+		return 0;
+
+	reg = (reg & ~(0x1F << shift)) | (val << shift);
+	writel(reg, &anatop->reg_core);
+
+	/*
+	 * The LDO ramp-up is based on 64 clock cycles of 24 MHz = 2.6 us per
+	 * step
+	 */
+	udelay(3 * step);
+
+	return 0;
+}
+
+static void set_ahb_rate(u32 val)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 reg, div;
+
+	div = get_periph_clk() / val - 1;
+	reg = readl(&mxc_ccm->cbcdr);
+
+	writel((reg & (~MXC_CCM_CBCDR_AHB_PODF_MASK)) |
+		(div << MXC_CCM_CBCDR_AHB_PODF_OFFSET), &mxc_ccm->cbcdr);
+}
+
+static void clear_mmdc_ch_mask(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 reg;
+	reg = readl(&mxc_ccm->ccdr);
+
+	/* Clear MMDC channel mask */
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() || is_mx6sll())
+		reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
+	else
+		reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
+	writel(reg, &mxc_ccm->ccdr);
+}
+
+#define OCOTP_MEM0_REFTOP_TRIM_SHIFT          8
+
+static void init_bandgap(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	uint32_t val;
+
+	/*
+	 * Ensure the bandgap has stabilized.
+	 */
+	while (!(readl(&anatop->ana_misc0) & 0x80))
+		;
+	/*
+	 * For best noise performance of the analog blocks using the
+	 * outputs of the bandgap, the reftop_selfbiasoff bit should
+	 * be set.
+	 */
+	writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
+	/*
+	 * On i.MX6ULL,we need to set VBGADJ bits according to the
+	 * REFTOP_TRIM[3:0] in fuse table
+	 *	000 - set REFTOP_VBGADJ[2:0] to 3b'110,
+	 *	110 - set REFTOP_VBGADJ[2:0] to 3b'000,
+	 *	001 - set REFTOP_VBGADJ[2:0] to 3b'001,
+	 *	010 - set REFTOP_VBGADJ[2:0] to 3b'010,
+	 *	011 - set REFTOP_VBGADJ[2:0] to 3b'011,
+	 *	100 - set REFTOP_VBGADJ[2:0] to 3b'100,
+	 *	101 - set REFTOP_VBGADJ[2:0] to 3b'101,
+	 *	111 - set REFTOP_VBGADJ[2:0] to 3b'111,
+	 */
+	if (is_mx6ull()) {
+		val = readl(&fuse->mem0);
+		val >>= OCOTP_MEM0_REFTOP_TRIM_SHIFT;
+		val &= 0x7;
+
+		writel(val << BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ_SHIFT,
+		       &anatop->ana_misc0_set);
+	}
+}
+
+#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6QDL)
+static void noc_setup(void)
+{
+	enable_ipu_clock();
+
+	writel(0x80000201, 0xbb0608);
+	/* Bypass IPU1 QoS generator */
+	writel(0x00000002, 0x00bb048c);
+	/* Bypass IPU2 QoS generator */
+	writel(0x00000002, 0x00bb050c);
+	/* Bandwidth THR for of PRE0 */
+	writel(0x00000200, 0x00bb0690);
+	/* Bandwidth THR for of PRE1 */
+	writel(0x00000200, 0x00bb0710);
+	/* Bandwidth THR for of PRE2 */
+	writel(0x00000200, 0x00bb0790);
+	/* Bandwidth THR for of PRE3 */
+	writel(0x00000200, 0x00bb0810);
+	/* Saturation THR for of PRE0 */
+	writel(0x00000010, 0x00bb0694);
+	/* Saturation THR for of PRE1 */
+	writel(0x00000010, 0x00bb0714);
+	/* Saturation THR for of PRE2 */
+	writel(0x00000010, 0x00bb0794);
+	/* Saturation THR for of PRE */
+	writel(0x00000010, 0x00bb0814);
+
+	disable_ipu_clock();
+}
+#endif
+
+int arch_cpu_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	init_aips();
+
+	/* Need to clear MMDC_CHx_MASK to make warm reset work. */
+	clear_mmdc_ch_mask();
+
+	/*
+	 * Disable self-bias circuit in the analog bandap.
+	 * The self-bias circuit is used by the bandgap during startup.
+	 * This bit should be set after the bandgap has initialized.
+	 */
+	init_bandgap();
+
+	if (!is_mx6ul() && !is_mx6ull()) {
+		/*
+		 * When low freq boot is enabled, ROM will not set AHB
+		 * freq, so we need to ensure AHB freq is 132MHz in such
+		 * scenario.
+		 *
+		 * To i.MX6UL, when power up, default ARM core and
+		 * AHB rate is 396M and 132M.
+		 */
+		if (mxc_get_clock(MXC_ARM_CLK) == 396000000)
+			set_ahb_rate(132000000);
+	}
+
+	if (is_mx6ul()) {
+		if (is_soc_rev(CHIP_REV_1_0) == 0) {
+			/*
+			 * According to the design team's requirement on
+			 * i.MX6UL,the PMIC_STBY_REQ PAD should be configured
+			 * as open drain 100K (0x0000b8a0).
+			 * Only exists on TO1.0
+			 */
+			writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c);
+		} else {
+			/*
+			 * From TO1.1, SNVS adds internal pull up control
+			 * for POR_B, the register filed is GPBIT[1:0],
+			 * after system boot up, it can be set to 2b'01
+			 * to disable internal pull up.It can save about
+			 * 30uA power in SNVS mode.
+			 */
+			writel((readl(MX6UL_SNVS_LP_BASE_ADDR + 0x10) &
+			       (~0x1400)) | 0x400,
+			       MX6UL_SNVS_LP_BASE_ADDR + 0x10);
+		}
+	}
+
+	if (is_mx6ull()) {
+		/*
+		 * GPBIT[1:0] is suggested to set to 2'b11:
+		 * 2'b00 : always PUP100K
+		 * 2'b01 : PUP100K when PMIC_ON_REQ or SOC_NOT_FAIL
+		 * 2'b10 : always disable PUP100K
+		 * 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL
+		 * register offset is different from i.MX6UL, since
+		 * i.MX6UL is fixed by ECO.
+		 */
+		writel(readl(MX6UL_SNVS_LP_BASE_ADDR) |
+			0x3, MX6UL_SNVS_LP_BASE_ADDR);
+	}
+
+	/* Set perclk to source from OSC 24MHz */
+	if (has_err007805())
+		setbits_le32(&ccm->cscmr1, MXC_CCM_CSCMR1_PER_CLK_SEL_MASK);
+
+	imx_wdog_disable_powerdown(); /* Disable PDE bit of WMCR register */
+
+	if (is_mx6sx())
+		setbits_le32(&ccm->cscdr1, MXC_CCM_CSCDR1_UART_CLK_SEL);
+
+	init_src();
+
+#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6QDL)
+	if (is_mx6dqp())
+		noc_setup();
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+__weak int board_mmc_get_env_dev(int devno)
+{
+	return CONFIG_SYS_MMC_ENV_DEV;
+}
+
+static int mmc_get_boot_dev(void)
+{
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+	u32 soc_sbmr = readl(&src_regs->sbmr1);
+	u32 bootsel;
+	int devno;
+
+	/*
+	 * Refer to
+	 * "i.MX 6Dual/6Quad Applications Processor Reference Manual"
+	 * Chapter "8.5.3.1 Expansion Device eFUSE Configuration"
+	 * i.MX6SL/SX/UL has same layout.
+	 */
+	bootsel = (soc_sbmr & 0x000000FF) >> 6;
+
+	/* No boot from sd/mmc */
+	if (bootsel != 1)
+		return -1;
+
+	/* BOOT_CFG2[3] and BOOT_CFG2[4] */
+	devno = (soc_sbmr & 0x00001800) >> 11;
+
+	return devno;
+}
+
+int mmc_get_env_dev(void)
+{
+	int devno = mmc_get_boot_dev();
+
+	/* If not boot from sd/mmc, use default value */
+	if (devno < 0)
+		return CONFIG_SYS_MMC_ENV_DEV;
+
+	return board_mmc_get_env_dev(devno);
+}
+
+#ifdef CONFIG_SYS_MMC_ENV_PART
+__weak int board_mmc_get_env_part(int devno)
+{
+	return CONFIG_SYS_MMC_ENV_PART;
+}
+
+uint mmc_get_env_part(struct mmc *mmc)
+{
+	int devno = mmc_get_boot_dev();
+
+	/* If not boot from sd/mmc, use default value */
+	if (devno < 0)
+		return CONFIG_SYS_MMC_ENV_PART;
+
+	return board_mmc_get_env_part(devno);
+}
+#endif
+#endif
+
+int board_postclk_init(void)
+{
+	/* NO LDO SOC on i.MX6SLL */
+	if (is_mx6sll())
+		return 0;
+
+	set_ldo_voltage(LDO_SOC, 1175);	/* Set VDDSOC to 1.175V */
+
+	return 0;
+}
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * cfg_val will be used for
+ * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
+ * After reset, if GPR10[28] is 1, ROM will use GPR9[25:0]
+ * instead of SBMR1 to determine the boot device.
+ */
+const struct boot_mode soc_boot_modes[] = {
+	{"normal",	MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
+	/* reserved value should start rom usb */
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+	{"usb",		MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
+#else
+	{"usb",		MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
+#endif
+	{"sata",	MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
+	{"ecspi1:0",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
+	{"ecspi1:1",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
+	{"ecspi1:2",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
+	{"ecspi1:3",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
+	/* 4 bit bus width */
+	{"esdhc1",	MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+	{"esdhc2",	MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{"esdhc3",	MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+	{"esdhc4",	MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+	{NULL,		0},
+};
+#endif
+
+void reset_misc(void)
+{
+#ifndef CONFIG_SPL_BUILD
+#if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_DM_VIDEO)
+	lcdif_power_down();
+#endif
+#endif
+}
+
+void s_init(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 mask480;
+	u32 mask528;
+	u32 reg, periph1, periph2;
+
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sll())
+		return;
+
+	/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
+	 * to make sure PFD is working right, otherwise, PFDs may
+	 * not output clock after reset, MX6DL and MX6SL have added 396M pfd
+	 * workaround in ROM code, as bus clock need it
+	 */
+
+	mask480 = ANATOP_PFD_CLKGATE_MASK(0) |
+		ANATOP_PFD_CLKGATE_MASK(1) |
+		ANATOP_PFD_CLKGATE_MASK(2) |
+		ANATOP_PFD_CLKGATE_MASK(3);
+	mask528 = ANATOP_PFD_CLKGATE_MASK(1) |
+		ANATOP_PFD_CLKGATE_MASK(3);
+
+	reg = readl(&ccm->cbcmr);
+	periph2 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK)
+		>> MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET);
+	periph1 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK)
+		>> MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET);
+
+	/* Checking if PLL2 PFD0 or PLL2 PFD2 is using for periph clock */
+	if ((periph2 != 0x2) && (periph1 != 0x2))
+		mask528 |= ANATOP_PFD_CLKGATE_MASK(0);
+
+	if ((periph2 != 0x1) && (periph1 != 0x1) &&
+		(periph2 != 0x3) && (periph1 != 0x3))
+		mask528 |= ANATOP_PFD_CLKGATE_MASK(2);
+
+	writel(mask480, &anatop->pfd_480_set);
+	writel(mask528, &anatop->pfd_528_set);
+	writel(mask480, &anatop->pfd_480_clr);
+	writel(mask528, &anatop->pfd_528_clr);
+}
+
+#ifdef CONFIG_IMX_HDMI
+void imx_enable_hdmi_phy(void)
+{
+	struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	u8 reg;
+	reg = readb(&hdmi->phy_conf0);
+	reg |= HDMI_PHY_CONF0_PDZ_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+	udelay(3000);
+	reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+	udelay(3000);
+	reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+	writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
+}
+
+void imx_setup_hdmi(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	struct hdmi_regs *hdmi  = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	int reg, count;
+	u8 val;
+
+	/* Turn on HDMI PHY clock */
+	reg = readl(&mxc_ccm->CCGR2);
+	reg |=  MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK|
+		 MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
+	writel(reg, &mxc_ccm->CCGR2);
+	writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
+	reg = readl(&mxc_ccm->chsccdr);
+	reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK|
+		 MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK|
+		 MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+	reg |= (CHSCCDR_PODF_DIVIDE_BY_3
+		 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
+		 |(CHSCCDR_IPU_PRE_CLK_540M_PFD
+		 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
+	writel(reg, &mxc_ccm->chsccdr);
+
+	/* Clear the overflow condition */
+	if (readb(&hdmi->ih_fc_stat2) & HDMI_IH_FC_STAT2_OVERFLOW_MASK) {
+		/* TMDS software reset */
+		writeb((u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, &hdmi->mc_swrstz);
+		val = readb(&hdmi->fc_invidconf);
+		/* Need minimum 3 times to write to clear the register */
+		for (count = 0 ; count < 5 ; count++)
+			writeb(val, &hdmi->fc_invidconf);
+	}
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+/*
+ * UNIQUE_ID describes a unique ID based on silicon wafer
+ * and die X/Y position
+ *
+ * UNIQUE_ID offset 0x410
+ * 31:0 fuse 0
+ * FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID
+ *
+ * UNIQUE_ID offset 0x420
+ * 31:24 fuse 1
+ * The X-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID
+ * 23:16 fuse 1
+ * The Y-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID
+ * 15:11 fuse 1
+ * The wafer number of the wafer on which the device was fabricated/SJC
+ * CHALLENGE/ Unique ID
+ * 10:0 fuse 1
+ * FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID
+ */
+static void setup_serial_number(void)
+{
+	char serial_string[17];
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[0];
+	struct fuse_bank0_regs *fuse =
+		(struct fuse_bank0_regs *)bank->fuse_regs;
+
+	if (env_get("serial#"))
+		return;
+
+	snprintf(serial_string, sizeof(serial_string), "%08x%08x",
+		 fuse->uid_low, fuse->uid_high);
+	env_set("serial#", serial_string);
+}
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+	setup_serial_number();
+	return 0;
+}
+#endif
+
+/*
+ * gpr_init() function is common for boards using MX6S, MX6DL, MX6D,
+ * MX6Q and MX6QP processors
+ */
+void gpr_init(void)
+{
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	/*
+	 * If this function is used in a common MX6 spl implementation
+	 * we have to ensure that it is only called for suitable cpu types,
+	 * otherwise it breaks hardware parts like enet1, can1, can2, etc.
+	 */
+	if (!is_mx6dqp() && !is_mx6dq() && !is_mx6sdl())
+		return;
+
+	/* enable AXI cache for VDOA/VPU/IPU */
+	writel(0xF00000CF, &iomux->gpr[4]);
+	if (is_mx6dqp()) {
+		/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
+		writel(0x77177717, &iomux->gpr[6]);
+		writel(0x77177717, &iomux->gpr[7]);
+	} else {
+		/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+		writel(0x007F007F, &iomux->gpr[6]);
+		writel(0x007F007F, &iomux->gpr[7]);
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/Kconfig b/roms/u-boot/arch/arm/mach-imx/mx7/Kconfig
new file mode 100644
index 000000000..adedc0116
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/Kconfig
@@ -0,0 +1,110 @@
+if ARCH_MX7
+
+config MX7
+	bool
+	default y
+	select ARCH_SUPPORT_PSCI
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ROM_UNIFIED_SECTIONS
+	select SYSCOUNTER_TIMER
+	imply CMD_FUSE
+
+config MX7D
+	bool
+	select HAS_CAAM
+	select ROM_UNIFIED_SECTIONS
+	imply CMD_FUSE
+
+config SYS_TEXT_BASE
+	default 0x87800000
+
+config SPL_TEXT_BASE
+	depends on SPL
+	default 0x00912000
+
+choice
+	prompt "MX7 board select"
+	optional
+
+config TARGET_CL_SOM_IMX7
+	bool "CL-SOM-iMX7"
+	select DM
+	select DM_THERMAL
+	select MX7D
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_IMX7_CM
+	bool "Ronetix iMX7-CM"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select MX7D
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_MEERKAT96
+	bool "NovTech Meerkat96 board"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+	select MX7D
+	imply CMD_DM
+
+config TARGET_MX7DSABRESD
+	bool "mx7dsabresd"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select MX7D
+	imply CMD_DM
+
+config TARGET_PICO_IMX7D
+	bool "pico-imx7d"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select MX7D
+	select SUPPORT_SPL
+	imply CMD_DM
+
+config TARGET_SMEGW01
+	bool "smegw01"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select MX7D
+	imply CMD_DM
+
+config TARGET_WARP7
+	bool "warp7"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select MX7D
+	imply CMD_DM
+
+config TARGET_COLIBRI_IMX7
+	bool "Support Colibri iMX7S/iMX7D modules"
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+	imply CMD_DM
+
+endchoice
+
+config SYS_SOC
+	default "mx7"
+
+source "board/compulab/cl-som-imx7/Kconfig"
+source "board/ronetix/imx7-cm/Kconfig"
+source "board/freescale/mx7dsabresd/Kconfig"
+source "board/novtech/meerkat96/Kconfig"
+source "board/storopack/smegw01/Kconfig"
+source "board/technexion/pico-imx7d/Kconfig"
+source "board/toradex/colibri_imx7/Kconfig"
+source "board/warp7/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/Makefile b/roms/u-boot/arch/arm/mach-imx/mx7/Makefile
new file mode 100644
index 000000000..f1436e2d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2015 Freescale Semiconductor, Inc.
+#
+
+obj-y	:= soc.o clock.o clock_slice.o ddr.o snvs.o
+obj-$(CONFIG_ARMV7_PSCI)  += psci-mx7.o psci-suspend.o
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/clock.c b/roms/u-boot/arch/arm/mach-imx/mx7/clock.c
new file mode 100644
index 000000000..304a03031
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/clock.c
@@ -0,0 +1,1139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * Author:
+ *	Peng Fan <Peng.Fan@freescale.com>
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <command.h>
+#include <div64.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
+					 ANATOP_BASE_ADDR;
+struct mxc_ccm_reg *ccm_reg = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC_IMX
+#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC3_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+#else
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#endif
+#endif
+	return 0;
+}
+
+u32 get_ahb_clk(void)
+{
+	return get_root_clk(AHB_CLK_ROOT);
+}
+
+static u32 get_ipg_clk(void)
+{
+	/*
+	 * The AHB and IPG are fixed at 2:1 ratio, and synchronized to
+	 * each other.
+	 */
+	return get_ahb_clk() / 2;
+}
+
+u32 imx_get_uartclk(void)
+{
+	return get_root_clk(UART_CLK_ROOT);
+}
+
+u32 imx_get_fecclk(void)
+{
+	return get_root_clk(ENET_AXI_CLK_ROOT);
+}
+
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+	clock_enable(CCGR_OCOTP, enable);
+}
+
+void enable_thermal_clk(void)
+{
+	enable_ocotp_clk(1);
+}
+#endif
+
+void enable_usboh3_clk(unsigned char enable)
+{
+	u32 target;
+
+	if (enable) {
+		/* disable the clock gate first */
+		clock_enable(CCGR_USB_HSIC, 0);
+
+		/* 120Mhz */
+		target = CLK_ROOT_ON |
+			 USB_HSIC_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK |
+			 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+			 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+		clock_set_target_val(USB_HSIC_CLK_ROOT, target);
+
+		/* enable the clock gate */
+		clock_enable(CCGR_USB_CTRL, 1);
+		clock_enable(CCGR_USB_HSIC, 1);
+		clock_enable(CCGR_USB_PHY1, 1);
+		clock_enable(CCGR_USB_PHY2, 1);
+	} else {
+		clock_enable(CCGR_USB_CTRL, 0);
+		clock_enable(CCGR_USB_HSIC, 0);
+		clock_enable(CCGR_USB_PHY1, 0);
+		clock_enable(CCGR_USB_PHY2, 0);
+	}
+}
+
+static u32 decode_pll(enum pll_clocks pll, u32 infreq)
+{
+	u32 reg, div_sel;
+	u32 num, denom;
+
+	/*
+	 * Alought there are four choices for the bypass src,
+	 * we choose OSC_24M which is the default set in ROM.
+	 */
+	switch (pll) {
+	case PLL_CORE:
+		reg = readl(&ccm_anatop->pll_arm);
+
+		if (reg & CCM_ANALOG_PLL_ARM_POWERDOWN_MASK)
+			return 0;
+
+		if (reg & CCM_ANALOG_PLL_ARM_BYPASS_MASK)
+			return MXC_HCLK;
+
+		div_sel = (reg & CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK) >>
+			   CCM_ANALOG_PLL_ARM_DIV_SELECT_SHIFT;
+
+		return (infreq * div_sel) / 2;
+
+	case PLL_SYS:
+		reg = readl(&ccm_anatop->pll_480);
+
+		if (reg & CCM_ANALOG_PLL_480_POWERDOWN_MASK)
+			return 0;
+
+		if (reg & CCM_ANALOG_PLL_480_BYPASS_MASK)
+			return MXC_HCLK;
+
+		if (((reg & CCM_ANALOG_PLL_480_DIV_SELECT_MASK) >>
+			CCM_ANALOG_PLL_480_DIV_SELECT_SHIFT) == 0)
+			return 480000000u;
+		else
+			return 528000000u;
+
+	case PLL_ENET:
+		reg = readl(&ccm_anatop->pll_enet);
+
+		if (reg & CCM_ANALOG_PLL_ENET_POWERDOWN_MASK)
+			return 0;
+
+		if (reg & CCM_ANALOG_PLL_ENET_BYPASS_MASK)
+			return MXC_HCLK;
+
+		return 1000000000u;
+
+	case PLL_DDR:
+		reg = readl(&ccm_anatop->pll_ddr);
+
+		if (reg & CCM_ANALOG_PLL_DDR_POWERDOWN_MASK)
+			return 0;
+
+		num = ccm_anatop->pll_ddr_num;
+		denom = ccm_anatop->pll_ddr_denom;
+
+		if (reg & CCM_ANALOG_PLL_DDR_BYPASS_MASK)
+			return MXC_HCLK;
+
+		div_sel = (reg & CCM_ANALOG_PLL_DDR_DIV_SELECT_MASK) >>
+			   CCM_ANALOG_PLL_DDR_DIV_SELECT_SHIFT;
+
+		return infreq * (div_sel + num / denom);
+
+	case PLL_USB:
+		return 480000000u;
+
+	default:
+		printf("Unsupported pll clocks %d\n", pll);
+		break;
+	}
+
+	return 0;
+}
+
+static u32 mxc_get_pll_sys_derive(int derive)
+{
+	u32 freq, div, frac;
+	u32 reg;
+
+	div = 1;
+	reg = readl(&ccm_anatop->pll_480);
+	freq = decode_pll(PLL_SYS, MXC_HCLK);
+
+	switch (derive) {
+	case PLL_SYS_MAIN_480M_CLK:
+		if (reg & CCM_ANALOG_PLL_480_MAIN_DIV1_CLKGATE_MASK)
+			return 0;
+		else
+			return freq;
+	case PLL_SYS_MAIN_240M_CLK:
+		if (reg & CCM_ANALOG_PLL_480_MAIN_DIV2_CLKGATE_MASK)
+			return 0;
+		else
+			return freq / 2;
+	case PLL_SYS_MAIN_120M_CLK:
+		if (reg & CCM_ANALOG_PLL_480_MAIN_DIV4_CLKGATE_MASK)
+			return 0;
+		else
+			return freq / 4;
+	case PLL_SYS_PFD0_392M_CLK:
+		reg = readl(&ccm_anatop->pfd_480a);
+		if (reg & CCM_ANALOG_PFD_480A_PFD0_DIV1_CLKGATE_MASK)
+			return 0;
+		frac = (reg & CCM_ANALOG_PFD_480A_PFD0_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480A_PFD0_FRAC_SHIFT;
+		break;
+	case PLL_SYS_PFD0_196M_CLK:
+		if (reg & CCM_ANALOG_PLL_480_PFD0_DIV2_CLKGATE_MASK)
+			return 0;
+		reg = readl(&ccm_anatop->pfd_480a);
+		frac = (reg & CCM_ANALOG_PFD_480A_PFD0_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480A_PFD0_FRAC_SHIFT;
+		div = 2;
+		break;
+	case PLL_SYS_PFD1_332M_CLK:
+		reg = readl(&ccm_anatop->pfd_480a);
+		if (reg & CCM_ANALOG_PFD_480A_PFD1_DIV1_CLKGATE_MASK)
+			return 0;
+		frac = (reg & CCM_ANALOG_PFD_480A_PFD1_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480A_PFD1_FRAC_SHIFT;
+		break;
+	case PLL_SYS_PFD1_166M_CLK:
+		if (reg & CCM_ANALOG_PLL_480_PFD1_DIV2_CLKGATE_MASK)
+			return 0;
+		reg = readl(&ccm_anatop->pfd_480a);
+		frac = (reg & CCM_ANALOG_PFD_480A_PFD1_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480A_PFD1_FRAC_SHIFT;
+		div = 2;
+		break;
+	case PLL_SYS_PFD2_270M_CLK:
+		reg = readl(&ccm_anatop->pfd_480a);
+		if (reg & CCM_ANALOG_PFD_480A_PFD2_DIV1_CLKGATE_MASK)
+			return 0;
+		frac = (reg & CCM_ANALOG_PFD_480A_PFD2_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480A_PFD2_FRAC_SHIFT;
+		break;
+	case PLL_SYS_PFD2_135M_CLK:
+		if (reg & CCM_ANALOG_PLL_480_PFD2_DIV2_CLKGATE_MASK)
+			return 0;
+		reg = readl(&ccm_anatop->pfd_480a);
+		frac = (reg & CCM_ANALOG_PFD_480A_PFD2_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480A_PFD2_FRAC_SHIFT;
+		div = 2;
+		break;
+	case PLL_SYS_PFD3_CLK:
+		reg = readl(&ccm_anatop->pfd_480a);
+		if (reg & CCM_ANALOG_PFD_480A_PFD3_DIV1_CLKGATE_MASK)
+			return 0;
+		frac = (reg & CCM_ANALOG_PFD_480A_PFD3_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480A_PFD3_FRAC_SHIFT;
+		break;
+	case PLL_SYS_PFD4_CLK:
+		reg = readl(&ccm_anatop->pfd_480b);
+		if (reg & CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_MASK)
+			return 0;
+		frac = (reg & CCM_ANALOG_PFD_480B_PFD4_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480B_PFD4_FRAC_SHIFT;
+		break;
+	case PLL_SYS_PFD5_CLK:
+		reg = readl(&ccm_anatop->pfd_480b);
+		if (reg & CCM_ANALOG_PFD_480B_PFD5_DIV1_CLKGATE_MASK)
+			return 0;
+		frac = (reg & CCM_ANALOG_PFD_480B_PFD5_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480B_PFD5_FRAC_SHIFT;
+		break;
+	case PLL_SYS_PFD6_CLK:
+		reg = readl(&ccm_anatop->pfd_480b);
+		if (reg & CCM_ANALOG_PFD_480B_PFD6_DIV1_CLKGATE_MASK)
+			return 0;
+		frac = (reg & CCM_ANALOG_PFD_480B_PFD6_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480B_PFD6_FRAC_SHIFT;
+		break;
+	case PLL_SYS_PFD7_CLK:
+		reg = readl(&ccm_anatop->pfd_480b);
+		if (reg & CCM_ANALOG_PFD_480B_PFD7_DIV1_CLKGATE_MASK)
+			return 0;
+		frac = (reg & CCM_ANALOG_PFD_480B_PFD7_FRAC_MASK) >>
+			CCM_ANALOG_PFD_480B_PFD7_FRAC_SHIFT;
+		break;
+	default:
+		printf("Error derived pll_sys clock %d\n", derive);
+		return 0;
+	}
+
+	return ((freq / frac) * 18) / div;
+}
+
+static u32 mxc_get_pll_enet_derive(int derive)
+{
+	u32 freq, reg;
+
+	freq = decode_pll(PLL_ENET, MXC_HCLK);
+	reg = readl(&ccm_anatop->pll_enet);
+
+	switch (derive) {
+	case PLL_ENET_MAIN_500M_CLK:
+		if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_MASK)
+			return freq / 2;
+		break;
+	case PLL_ENET_MAIN_250M_CLK:
+		if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_MASK)
+			return freq / 4;
+		break;
+	case PLL_ENET_MAIN_125M_CLK:
+		if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_MASK)
+			return freq / 8;
+		break;
+	case PLL_ENET_MAIN_100M_CLK:
+		if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_MASK)
+			return freq / 10;
+		break;
+	case PLL_ENET_MAIN_50M_CLK:
+		if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_MASK)
+			return freq / 20;
+		break;
+	case PLL_ENET_MAIN_40M_CLK:
+		if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_MASK)
+			return freq / 25;
+		break;
+	case PLL_ENET_MAIN_25M_CLK:
+		if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_MASK)
+			return freq / 40;
+		break;
+	default:
+		printf("Error derived pll_enet clock %d\n", derive);
+		break;
+	}
+
+	return 0;
+}
+
+static u32 mxc_get_pll_ddr_derive(int derive)
+{
+	u32 freq, reg;
+
+	freq = decode_pll(PLL_DDR, MXC_HCLK);
+	reg = readl(&ccm_anatop->pll_ddr);
+
+	switch (derive) {
+	case PLL_DRAM_MAIN_1066M_CLK:
+		return freq;
+	case PLL_DRAM_MAIN_533M_CLK:
+		if (reg & CCM_ANALOG_PLL_DDR_DIV2_ENABLE_CLK_MASK)
+			return freq / 2;
+		break;
+	default:
+		printf("Error derived pll_ddr clock %d\n", derive);
+		break;
+	}
+
+	return 0;
+}
+
+static u32 mxc_get_pll_derive(enum pll_clocks pll, int derive)
+{
+	switch (pll) {
+	case PLL_SYS:
+		return mxc_get_pll_sys_derive(derive);
+	case PLL_ENET:
+		return mxc_get_pll_enet_derive(derive);
+	case PLL_DDR:
+		return mxc_get_pll_ddr_derive(derive);
+	default:
+		printf("Error pll.\n");
+		return 0;
+	}
+}
+
+static u32 get_root_src_clk(enum clk_root_src root_src)
+{
+	switch (root_src) {
+	case OSC_24M_CLK:
+		return 24000000u;
+	case PLL_ARM_MAIN_800M_CLK:
+		return decode_pll(PLL_CORE, MXC_HCLK);
+
+	case PLL_SYS_MAIN_480M_CLK:
+	case PLL_SYS_MAIN_240M_CLK:
+	case PLL_SYS_MAIN_120M_CLK:
+	case PLL_SYS_PFD0_392M_CLK:
+	case PLL_SYS_PFD0_196M_CLK:
+	case PLL_SYS_PFD1_332M_CLK:
+	case PLL_SYS_PFD1_166M_CLK:
+	case PLL_SYS_PFD2_270M_CLK:
+	case PLL_SYS_PFD2_135M_CLK:
+	case PLL_SYS_PFD3_CLK:
+	case PLL_SYS_PFD4_CLK:
+	case PLL_SYS_PFD5_CLK:
+	case PLL_SYS_PFD6_CLK:
+	case PLL_SYS_PFD7_CLK:
+		return mxc_get_pll_derive(PLL_SYS, root_src);
+
+	case PLL_ENET_MAIN_500M_CLK:
+	case PLL_ENET_MAIN_250M_CLK:
+	case PLL_ENET_MAIN_125M_CLK:
+	case PLL_ENET_MAIN_100M_CLK:
+	case PLL_ENET_MAIN_50M_CLK:
+	case PLL_ENET_MAIN_40M_CLK:
+	case PLL_ENET_MAIN_25M_CLK:
+		return mxc_get_pll_derive(PLL_ENET, root_src);
+
+	case PLL_DRAM_MAIN_1066M_CLK:
+	case PLL_DRAM_MAIN_533M_CLK:
+		return mxc_get_pll_derive(PLL_DDR, root_src);
+
+	case PLL_AUDIO_MAIN_CLK:
+		return decode_pll(PLL_AUDIO, MXC_HCLK);
+	case PLL_VIDEO_MAIN_CLK:
+		return decode_pll(PLL_VIDEO, MXC_HCLK);
+
+	case PLL_USB_MAIN_480M_CLK:
+		return decode_pll(PLL_USB, MXC_HCLK);
+
+	case REF_1M_CLK:
+		return 1000000;
+	case OSC_32K_CLK:
+		return MXC_CLK32;
+
+	case EXT_CLK_1:
+	case EXT_CLK_2:
+	case EXT_CLK_3:
+	case EXT_CLK_4:
+		printf("No EXT CLK supported??\n");
+		break;
+	};
+
+	return 0;
+}
+
+u32 get_root_clk(enum clk_root_index clock_id)
+{
+	enum clk_root_src root_src;
+	u32 post_podf, pre_podf, auto_podf, root_src_clk;
+	int auto_en;
+
+	if (clock_root_enabled(clock_id) <= 0)
+		return 0;
+
+	if (clock_get_prediv(clock_id, &pre_podf) < 0)
+		return 0;
+
+	if (clock_get_postdiv(clock_id, &post_podf) < 0)
+		return 0;
+
+	if (clock_get_autopostdiv(clock_id, &auto_podf, &auto_en) < 0)
+		return 0;
+
+	if (auto_en == 0)
+		auto_podf = 0;
+
+	if (clock_get_src(clock_id, &root_src) < 0)
+		return 0;
+
+	root_src_clk = get_root_src_clk(root_src);
+
+	/*
+	 * bypass clk is ignored.
+	 */
+
+	return root_src_clk / (post_podf + 1) / (pre_podf + 1) /
+		(auto_podf + 1);
+}
+
+static u32 get_ddrc_clk(void)
+{
+	u32 reg, freq;
+	enum root_post_div post_div;
+
+	reg = readl(&ccm_reg->root[DRAM_CLK_ROOT].target_root);
+	if (reg & CLK_ROOT_MUX_MASK)
+		/* DRAM_ALT_CLK_ROOT */
+		freq = get_root_clk(DRAM_ALT_CLK_ROOT);
+	else
+		/* PLL_DRAM_MAIN_1066M_CLK */
+		freq = mxc_get_pll_derive(PLL_DDR, PLL_DRAM_MAIN_1066M_CLK);
+
+	post_div = reg & DRAM_CLK_ROOT_POST_DIV_MASK;
+
+	return freq / (post_div + 1) / 2;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return get_root_clk(ARM_A7_CLK_ROOT);
+	case MXC_AXI_CLK:
+		return get_root_clk(MAIN_AXI_CLK_ROOT);
+	case MXC_AHB_CLK:
+		return get_root_clk(AHB_CLK_ROOT);
+	case MXC_IPG_CLK:
+		return get_ipg_clk();
+	case MXC_I2C_CLK:
+		return get_root_clk(I2C1_CLK_ROOT);
+	case MXC_UART_CLK:
+		return get_root_clk(UART1_CLK_ROOT);
+	case MXC_CSPI_CLK:
+		return get_root_clk(ECSPI1_CLK_ROOT);
+	case MXC_DDR_CLK:
+		return get_ddrc_clk();
+	case MXC_ESDHC_CLK:
+		return get_root_clk(USDHC1_CLK_ROOT);
+	case MXC_ESDHC2_CLK:
+		return get_root_clk(USDHC2_CLK_ROOT);
+	case MXC_ESDHC3_CLK:
+		return get_root_clk(USDHC3_CLK_ROOT);
+	default:
+		printf("Unsupported mxc_clock %d\n", clk);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SYS_I2C_MXC
+/* i2c_num can be 0 - 3 */
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
+{
+	u32 target;
+
+	if (i2c_num >= 4)
+		return -EINVAL;
+
+	if (enable) {
+		clock_enable(CCGR_I2C1 + i2c_num, 0);
+
+		/* Set i2c root clock to PLL_SYS_MAIN_120M_CLK */
+
+		target = CLK_ROOT_ON |
+			 I2C1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK |
+			 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+			 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
+		clock_set_target_val(I2C1_CLK_ROOT + i2c_num, target);
+
+		clock_enable(CCGR_I2C1 + i2c_num, 1);
+	} else {
+		clock_enable(CCGR_I2C1 + i2c_num, 0);
+	}
+
+	return 0;
+}
+#endif
+
+static void init_clk_esdhc(void)
+{
+	u32 target;
+
+	/* disable the clock gate first */
+	clock_enable(CCGR_USDHC1, 0);
+	clock_enable(CCGR_USDHC2, 0);
+	clock_enable(CCGR_USDHC3, 0);
+
+	/* 196: 392/2 */
+	target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
+	clock_set_target_val(USDHC1_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
+	clock_set_target_val(USDHC2_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
+	clock_set_target_val(USDHC3_CLK_ROOT, target);
+
+	/* enable the clock gate */
+	clock_enable(CCGR_USDHC1, 1);
+	clock_enable(CCGR_USDHC2, 1);
+	clock_enable(CCGR_USDHC3, 1);
+}
+
+static void init_clk_uart(void)
+{
+	u32 target;
+
+	/* disable the clock gate first */
+	clock_enable(CCGR_UART1, 0);
+	clock_enable(CCGR_UART2, 0);
+	clock_enable(CCGR_UART3, 0);
+	clock_enable(CCGR_UART4, 0);
+	clock_enable(CCGR_UART5, 0);
+	clock_enable(CCGR_UART6, 0);
+	clock_enable(CCGR_UART7, 0);
+
+	/* 24Mhz */
+	target = CLK_ROOT_ON | UART1_CLK_ROOT_FROM_OSC_24M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(UART1_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | UART2_CLK_ROOT_FROM_OSC_24M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(UART2_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | UART3_CLK_ROOT_FROM_OSC_24M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(UART3_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | UART4_CLK_ROOT_FROM_OSC_24M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(UART4_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | UART5_CLK_ROOT_FROM_OSC_24M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(UART5_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | UART6_CLK_ROOT_FROM_OSC_24M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(UART6_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | UART7_CLK_ROOT_FROM_OSC_24M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(UART7_CLK_ROOT, target);
+
+	/* enable the clock gate */
+	clock_enable(CCGR_UART1, 1);
+	clock_enable(CCGR_UART2, 1);
+	clock_enable(CCGR_UART3, 1);
+	clock_enable(CCGR_UART4, 1);
+	clock_enable(CCGR_UART5, 1);
+	clock_enable(CCGR_UART6, 1);
+	clock_enable(CCGR_UART7, 1);
+}
+
+static void init_clk_weim(void)
+{
+	u32 target;
+
+	/* disable the clock gate first */
+	clock_enable(CCGR_WEIM, 0);
+
+	/* 120Mhz */
+	target = CLK_ROOT_ON | EIM_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(EIM_CLK_ROOT, target);
+
+	/* enable the clock gate */
+	clock_enable(CCGR_WEIM, 1);
+}
+
+static void init_clk_ecspi(void)
+{
+	u32 target;
+
+	/* disable the clock gate first */
+	clock_enable(CCGR_ECSPI1, 0);
+	clock_enable(CCGR_ECSPI2, 0);
+	clock_enable(CCGR_ECSPI3, 0);
+	clock_enable(CCGR_ECSPI4, 0);
+
+	/* 60Mhz: 240/4 */
+	target = CLK_ROOT_ON | ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ECSPI1_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ECSPI2_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ECSPI3_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ECSPI4_CLK_ROOT, target);
+
+	/* enable the clock gate */
+	clock_enable(CCGR_ECSPI1, 1);
+	clock_enable(CCGR_ECSPI2, 1);
+	clock_enable(CCGR_ECSPI3, 1);
+	clock_enable(CCGR_ECSPI4, 1);
+}
+
+static void init_clk_wdog(void)
+{
+	u32 target;
+
+	/* disable the clock gate first */
+	clock_enable(CCGR_WDOG1, 0);
+	clock_enable(CCGR_WDOG2, 0);
+	clock_enable(CCGR_WDOG3, 0);
+	clock_enable(CCGR_WDOG4, 0);
+
+	/* 24Mhz */
+	target = CLK_ROOT_ON | WDOG_CLK_ROOT_FROM_OSC_24M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(WDOG_CLK_ROOT, target);
+
+	/* enable the clock gate */
+	clock_enable(CCGR_WDOG1, 1);
+	clock_enable(CCGR_WDOG2, 1);
+	clock_enable(CCGR_WDOG3, 1);
+	clock_enable(CCGR_WDOG4, 1);
+}
+
+#ifdef CONFIG_MXC_EPDC
+static void init_clk_epdc(void)
+{
+	u32 target;
+
+	/* disable the clock gate first */
+	clock_enable(CCGR_EPDC, 0);
+
+	/* 24Mhz */
+	target = CLK_ROOT_ON | EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV12);
+	clock_set_target_val(EPDC_PIXEL_CLK_ROOT, target);
+
+	/* enable the clock gate */
+	clock_enable(CCGR_EPDC, 1);
+}
+#endif
+
+static int enable_pll_enet(void)
+{
+	u32 reg;
+	s32 timeout = 100000;
+
+	reg = readl(&ccm_anatop->pll_enet);
+	/* If pll_enet powered up, no need to set it again */
+	if (reg & ANADIG_PLL_ENET_PWDN_MASK) {
+		reg &= ~ANADIG_PLL_ENET_PWDN_MASK;
+		writel(reg, &ccm_anatop->pll_enet);
+
+		while (timeout--) {
+			if (readl(&ccm_anatop->pll_enet) & ANADIG_PLL_LOCK)
+				break;
+		}
+
+		if (timeout <= 0) {
+			/* If timeout, we set pwdn for pll_enet. */
+			reg |= ANADIG_PLL_ENET_PWDN_MASK;
+			return -ETIME;
+		}
+	}
+
+	/* Clear bypass */
+	writel(CCM_ANALOG_PLL_ENET_BYPASS_MASK, &ccm_anatop->pll_enet_clr);
+
+	writel((CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_MASK
+		| CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_MASK
+		| CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_MASK
+		| CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_MASK
+		| CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_MASK
+		| CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_MASK
+		| CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_MASK),
+	       &ccm_anatop->pll_enet_set);
+
+	return 0;
+}
+static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom,
+	u32 post_div)
+{
+	u32 reg = 0;
+	ulong start;
+
+	debug("pll5 div = %d, num = %d, denom = %d\n",
+		pll_div, pll_num, pll_denom);
+
+	/* Power up PLL5 video and disable its output */
+	writel(CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_MASK |
+		CCM_ANALOG_PLL_VIDEO_CLR_POWERDOWN_MASK |
+		CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_MASK |
+		CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_MASK |
+		CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_MASK |
+		CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_MASK,
+		&ccm_anatop->pll_video_clr);
+
+	/* Set div, num and denom */
+	switch (post_div) {
+	case 1:
+		writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
+			CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x1) |
+			CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0),
+			&ccm_anatop->pll_video_set);
+		break;
+	case 2:
+		writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
+			CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) |
+			CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0),
+			&ccm_anatop->pll_video_set);
+		break;
+	case 3:
+		writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
+			CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) |
+			CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x1),
+			&ccm_anatop->pll_video_set);
+		break;
+	case 4:
+		writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
+			CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) |
+			CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x3),
+			&ccm_anatop->pll_video_set);
+		break;
+	case 0:
+	default:
+		writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
+			CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x2) |
+			CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0),
+			&ccm_anatop->pll_video_set);
+		break;
+	}
+
+	writel(CCM_ANALOG_PLL_VIDEO_NUM_A(pll_num),
+		&ccm_anatop->pll_video_num);
+
+	writel(CCM_ANALOG_PLL_VIDEO_DENOM_B(pll_denom),
+		&ccm_anatop->pll_video_denom);
+
+	/* Wait PLL5 lock */
+	start = get_timer(0);	/* Get current timestamp */
+
+	do {
+		reg = readl(&ccm_anatop->pll_video);
+		if (reg & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) {
+			/* Enable PLL out */
+			writel(CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_MASK,
+					&ccm_anatop->pll_video_set);
+			return 0;
+		}
+	} while (get_timer(0) < (start + 10)); /* Wait 10ms */
+
+	printf("Lock PLL5 timeout\n");
+
+	return 1;
+}
+
+int set_clk_qspi(void)
+{
+	u32 target;
+
+	/* disable the clock gate first */
+	clock_enable(CCGR_QSPI, 0);
+
+	/* 49M: 392/2/4 */
+	target = CLK_ROOT_ON | QSPI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
+	clock_set_target_val(QSPI_CLK_ROOT, target);
+
+	/* enable the clock gate */
+	clock_enable(CCGR_QSPI, 1);
+
+	return 0;
+}
+
+int set_clk_nand(void)
+{
+	u32 target;
+
+	/* disable the clock gate first */
+	clock_enable(CCGR_RAWNAND, 0);
+
+	enable_pll_enet();
+	/* 100: 500/5 */
+	target = CLK_ROOT_ON | NAND_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV5);
+	clock_set_target_val(NAND_CLK_ROOT, target);
+
+	/* enable the clock gate */
+	clock_enable(CCGR_RAWNAND, 1);
+
+	return 0;
+}
+
+void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq)
+{
+	u32 hck = MXC_HCLK/1000;
+	u32 min = hck * 27;
+	u32 max = hck * 54;
+	u32 temp, best = 0;
+	u32 i, j, pred = 1, postd = 1;
+	u32 pll_div, pll_num, pll_denom, post_div = 0;
+	u32 target;
+
+	debug("mxs_set_lcdclk, freq = %d\n", freq);
+
+	clock_enable(CCGR_LCDIF, 0);
+
+	temp = (freq * 8 * 8);
+	if (temp < min) {
+		for (i = 1; i <= 4; i++) {
+			if ((temp * (1 << i)) > min) {
+				post_div = i;
+				freq = (freq * (1 << i));
+				break;
+			}
+		}
+
+		if (5 == i) {
+			printf("Fail to set rate to %u kHz", freq);
+			return;
+		}
+	}
+
+	for (i = 1; i <= 8; i++) {
+		for (j = 1; j <= 8; j++) {
+			temp = freq * i * j;
+			if (temp > max || temp < min)
+				continue;
+
+			if (best == 0 || temp < best) {
+				best = temp;
+				pred = i;
+				postd = j;
+			}
+		}
+	}
+
+	if (best == 0) {
+		printf("Fail to set rate to %u kHz", freq);
+		return;
+	}
+
+	debug("best %d, pred = %d, postd = %d\n", best, pred, postd);
+
+	pll_div = best / hck;
+	pll_denom = 1000000;
+	pll_num = (best - hck * pll_div) * pll_denom / hck;
+
+	if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
+		return;
+
+	target = CLK_ROOT_ON | LCDIF_PIXEL_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK |
+		 CLK_ROOT_PRE_DIV((pred - 1)) | CLK_ROOT_POST_DIV((postd - 1));
+	clock_set_target_val(LCDIF_PIXEL_CLK_ROOT, target);
+
+	clock_enable(CCGR_LCDIF, 1);
+}
+
+#ifdef CONFIG_FEC_MXC
+int set_clk_enet(enum enet_freq type)
+{
+	u32 target;
+	int ret;
+	u32 enet1_ref, enet2_ref;
+
+	/* disable the clock first */
+	clock_enable(CCGR_ENET1, 0);
+	clock_enable(CCGR_ENET2, 0);
+
+	switch (type) {
+	case ENET_125MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
+		enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
+		break;
+	case ENET_50MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
+		enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
+		break;
+	case ENET_25MHZ:
+		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
+		enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = enable_pll_enet();
+	if (ret != 0)
+		return ret;
+
+	/* set enet axi clock 196M: 392/2 */
+	target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
+	clock_set_target_val(ENET_AXI_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | enet1_ref |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET1_REF_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ENET1_TIME_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | enet2_ref |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET2_REF_CLK_ROOT, target);
+
+	target = CLK_ROOT_ON | ENET2_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+	clock_set_target_val(ENET2_TIME_CLK_ROOT, target);
+
+#ifdef CONFIG_FEC_MXC_25M_REF_CLK
+	target = CLK_ROOT_ON |
+		 ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK |
+		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+	clock_set_target_val(ENET_PHY_REF_CLK_ROOT, target);
+#endif
+	/* enable clock */
+	clock_enable(CCGR_ENET1, 1);
+	clock_enable(CCGR_ENET2, 1);
+
+	return 0;
+}
+#endif
+
+/* Configure PLL/PFD freq */
+void clock_init(void)
+{
+/* Rom has enabled PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET
+ *   In u-boot, we have to:
+ *   1. Configure PFD3- PFD7 for freq we needed in u-boot
+ *   2. Set clock root for peripherals (ip channel) used in u-boot but without set rate
+ *       interface.  The clocks for these peripherals are enabled after this intialization.
+ *   3. Other peripherals with set clock rate interface does not be set in this function.
+ */
+	u32 reg;
+
+	/*
+	 * Configure PFD4 to 392M
+	 * 480M * 18 / 0x16 = 392M
+	 */
+	reg = readl(&ccm_anatop->pfd_480b);
+
+	reg &= ~(ANATOP_PFD480B_PFD4_FRAC_MASK |
+		 CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_MASK);
+	reg |= ANATOP_PFD480B_PFD4_FRAC_392M_VAL;
+
+	writel(reg, &ccm_anatop->pfd_480b);
+
+	init_clk_esdhc();
+	init_clk_uart();
+	init_clk_weim();
+	init_clk_ecspi();
+	init_clk_wdog();
+#ifdef CONFIG_MXC_EPDC
+	init_clk_epdc();
+#endif
+
+	enable_usboh3_clk(1);
+
+	clock_enable(CCGR_SNVS, 1);
+
+#ifdef CONFIG_NAND_MXS
+	clock_enable(CCGR_RAWNAND, 1);
+#endif
+
+	if (IS_ENABLED(CONFIG_IMX_RDC)) {
+		clock_enable(CCGR_RDC, 1);
+		clock_enable(CCGR_SEMA1, 1);
+		clock_enable(CCGR_SEMA2, 1);
+	}
+}
+
+#ifdef CONFIG_IMX_HAB
+void hab_caam_clock_enable(unsigned char enable)
+{
+	if (enable)
+		clock_enable(CCGR_CAAM, 1);
+	else
+		clock_enable(CCGR_CAAM, 0);
+}
+#endif
+
+#ifdef CONFIG_MXC_EPDC
+void epdc_clock_enable(void)
+{
+	clock_enable(CCGR_EPDC, 1);
+}
+void epdc_clock_disable(void)
+{
+	clock_enable(CCGR_EPDC, 0);
+}
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Dump some core clockes.
+ */
+int do_mx7_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	u32 freq;
+	freq = decode_pll(PLL_CORE, MXC_HCLK);
+	printf("PLL_CORE    %8d MHz\n", freq / 1000000);
+	freq = decode_pll(PLL_SYS, MXC_HCLK);
+	printf("PLL_SYS    %8d MHz\n", freq / 1000000);
+	freq = decode_pll(PLL_ENET, MXC_HCLK);
+	printf("PLL_NET    %8d MHz\n", freq / 1000000);
+
+	printf("\n");
+
+	printf("IPG        %8u kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+	printf("UART       %8u kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
+#ifdef CONFIG_MXC_SPI
+	printf("CSPI       %8u kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
+#endif
+	printf("AHB        %8u kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+	printf("AXI        %8u kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
+	printf("DDR        %8u kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
+	printf("USDHC1     %8u kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
+	printf("USDHC2     %8u kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
+	printf("USDHC3     %8u kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx7_showclocks,
+	"display clocks",
+	""
+);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/clock_slice.c b/roms/u-boot/arch/arm/mach-imx/mx7/clock_slice.c
new file mode 100644
index 000000000..dd731d949
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/clock_slice.c
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * Author:
+ *	Peng Fan <Peng.Fan@freescale.com>
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+static struct clk_root_map root_array[] = {
+	{ARM_A7_CLK_ROOT, CCM_CORE_CHANNEL,
+	 {OSC_24M_CLK, PLL_ARM_MAIN_800M_CLK, PLL_ENET_MAIN_500M_CLK,
+	  PLL_DRAM_MAIN_1066M_CLK, PLL_SYS_MAIN_480M_CLK,
+	  PLL_SYS_PFD0_392M_CLK, PLL_AUDIO_MAIN_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{ARM_M4_CLK_ROOT, CCM_BUS_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_250M_CLK,
+	  PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{ARM_M0_CLK_ROOT, CCM_BUS_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_125M_CLK,
+	  PLL_SYS_PFD2_135M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{MAIN_AXI_CLK_ROOT, CCM_BUS_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD1_332M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_SYS_PFD5_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{DISP_AXI_CLK_ROOT, CCM_BUS_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD1_332M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK,
+	  PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{ENET_AXI_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK}
+	},
+	{NAND_USDHC_BUS_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_SYS_MAIN_240M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_PFD6_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_AUDIO_MAIN_CLK}
+	},
+	{AHB_CLK_ROOT, CCM_AHB_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_SYS_PFD0_392M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_USB_MAIN_480M_CLK,
+	  PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{DRAM_PHYM_CLK_ROOT, CCM_DRAM_PHYM_CHANNEL,
+	 {PLL_DRAM_MAIN_1066M_CLK, DRAM_PHYM_ALT_CLK_ROOT}
+	},
+	{DRAM_CLK_ROOT, CCM_DRAM_CHANNEL,
+	 {PLL_DRAM_MAIN_1066M_CLK, DRAM_ALT_CLK_ROOT}
+	},
+	{DRAM_PHYM_ALT_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_SYS_MAIN_480M_CLK,
+	  PLL_ENET_MAIN_500M_CLK, PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD7_CLK,
+	  PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{DRAM_ALT_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_SYS_MAIN_480M_CLK,
+	  PLL_ENET_MAIN_500M_CLK, PLL_ENET_MAIN_250M_CLK,
+	  PLL_SYS_PFD0_392M_CLK, PLL_AUDIO_MAIN_CLK, PLL_SYS_PFD2_270M_CLK}
+	},
+	{USB_HSIC_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_USB_MAIN_480M_CLK,
+	  PLL_SYS_PFD3_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD5_CLK,
+	  PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{PCIE_CTRL_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_250M_CLK, PLL_SYS_MAIN_240M_CLK,
+	  PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD1_332M_CLK, PLL_SYS_PFD6_CLK}
+	},
+	{PCIE_PHY_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_ENET_MAIN_500M_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3,
+	  EXT_CLK_4, PLL_SYS_PFD0_392M_CLK}
+	},
+	{EPDC_PIXEL_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD1_332M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD5_CLK, PLL_SYS_PFD6_CLK,
+	  PLL_SYS_PFD7_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{LCDIF_PIXEL_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD5_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  EXT_CLK_3, PLL_SYS_PFD4_CLK, PLL_SYS_PFD2_270M_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{MIPI_DSI_EXTSER_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD5_CLK, PLL_SYS_PFD3_CLK,
+	  PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD0_196M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_AUDIO_MAIN_CLK}
+	},
+	{MIPI_CSI_WARP_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD3_CLK,
+	  PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD0_196M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_AUDIO_MAIN_CLK}
+	},
+	{MIPI_DPHY_REF_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_SYS_PFD5_CLK, REF_1M_CLK, EXT_CLK_2,
+	  PLL_VIDEO_MAIN_CLK, EXT_CLK_3}
+	},
+	{SAI1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK,
+	  PLL_ENET_MAIN_125M_CLK, EXT_CLK_2}
+	},
+	{SAI2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK,
+	  PLL_ENET_MAIN_125M_CLK, EXT_CLK_2}
+	},
+	{SAI3_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK,
+	  PLL_ENET_MAIN_125M_CLK, EXT_CLK_3}
+	},
+	{SPDIF_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK,
+	  PLL_ENET_MAIN_125M_CLK, EXT_CLK_3}
+	},
+	{ENET1_REF_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_ENET_MAIN_50M_CLK,
+	  PLL_ENET_MAIN_25M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, EXT_CLK_4}
+	},
+	{ENET1_TIME_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_AUDIO_MAIN_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3,
+	  EXT_CLK_4, PLL_VIDEO_MAIN_CLK}
+	},
+	{ENET2_REF_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_ENET_MAIN_50M_CLK,
+	  PLL_ENET_MAIN_25M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, EXT_CLK_4}
+	},
+	{ENET2_TIME_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_AUDIO_MAIN_CLK,
+	  EXT_CLK_1, EXT_CLK_2, EXT_CLK_3,
+	  EXT_CLK_4, PLL_VIDEO_MAIN_CLK}
+	},
+	{ENET_PHY_REF_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_25M_CLK, PLL_ENET_MAIN_50M_CLK,
+	  PLL_ENET_MAIN_125M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD3_CLK}
+	},
+	{EIM_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_SYS_PFD2_270M_CLK, PLL_SYS_PFD3_CLK,
+	  PLL_ENET_MAIN_125M_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{NAND_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_SYS_PFD0_392M_CLK, PLL_SYS_PFD3_CLK, PLL_ENET_MAIN_500M_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{QSPI_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD4_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD3_CLK, PLL_SYS_PFD2_270M_CLK,
+	  PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{USDHC1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD0_392M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD2_270M_CLK,
+	  PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{USDHC2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD0_392M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD2_270M_CLK,
+	  PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{USDHC3_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD0_392M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD2_270M_CLK,
+	  PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{CAN1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_SYS_MAIN_480M_CLK, PLL_ENET_MAIN_40M_CLK, PLL_USB_MAIN_480M_CLK,
+	  EXT_CLK_1, EXT_CLK_4}
+	},
+	{CAN2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_SYS_MAIN_480M_CLK, PLL_ENET_MAIN_40M_CLK, PLL_USB_MAIN_480M_CLK,
+	  EXT_CLK_1, EXT_CLK_3}
+	},
+	{I2C1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_50M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK,
+	  PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD2_135M_CLK}
+	},
+	{I2C2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_50M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK,
+	  PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD2_135M_CLK}
+	},
+	{I2C3_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_50M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK,
+	  PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD2_135M_CLK}
+	},
+	{I2C4_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_50M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK,
+	  PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD2_135M_CLK}
+	},
+	{UART1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2,
+	  EXT_CLK_4, PLL_USB_MAIN_480M_CLK}
+	},
+	{UART2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2,
+	  EXT_CLK_3, PLL_USB_MAIN_480M_CLK}
+	},
+	{UART3_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2,
+	  EXT_CLK_4, PLL_USB_MAIN_480M_CLK}
+	},
+	{UART4_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2,
+	  EXT_CLK_3, PLL_USB_MAIN_480M_CLK}
+	},
+	{UART5_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2,
+	  EXT_CLK_4, PLL_USB_MAIN_480M_CLK}
+	},
+	{UART6_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2,
+	  EXT_CLK_3, PLL_USB_MAIN_480M_CLK}
+	},
+	{UART7_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2,
+	  EXT_CLK_4, PLL_USB_MAIN_480M_CLK}
+	},
+	{ECSPI1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_SYS_MAIN_120M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD4_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{ECSPI2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_SYS_MAIN_120M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD4_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{ECSPI3_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_SYS_MAIN_120M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD4_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{ECSPI4_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK,
+	  PLL_SYS_MAIN_120M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD4_CLK,
+	  PLL_ENET_MAIN_250M_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{PWM1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_1,
+	  REF_1M_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{PWM2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_1,
+	  REF_1M_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{PWM3_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_2,
+	  REF_1M_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{PWM4_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_2,
+	  REF_1M_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{FLEXTIMER1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_3,
+	  REF_1M_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{FLEXTIMER2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_3,
+	  REF_1M_CLK, PLL_VIDEO_MAIN_CLK}
+	},
+	{SIM1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_USB_MAIN_480M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_ENET_MAIN_125M_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{SIM2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_USB_MAIN_480M_CLK, PLL_VIDEO_MAIN_CLK,
+	  PLL_ENET_MAIN_125M_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{GPT1_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_PFD0_392M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_VIDEO_MAIN_CLK, REF_1M_CLK,
+	  PLL_AUDIO_MAIN_CLK, EXT_CLK_1}
+	},
+	{GPT2_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_PFD0_392M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_VIDEO_MAIN_CLK, REF_1M_CLK,
+	  PLL_AUDIO_MAIN_CLK, EXT_CLK_2}
+	},
+	{GPT3_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_PFD0_392M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_VIDEO_MAIN_CLK, REF_1M_CLK,
+	  PLL_AUDIO_MAIN_CLK, EXT_CLK_3}
+	},
+	{GPT4_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_PFD0_392M_CLK,
+	  PLL_ENET_MAIN_40M_CLK, PLL_VIDEO_MAIN_CLK, REF_1M_CLK,
+	  PLL_AUDIO_MAIN_CLK, EXT_CLK_4}
+	},
+	{TRACE_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_USB_MAIN_480M_CLK,
+	  EXT_CLK_1, EXT_CLK_3}
+	},
+	{WDOG_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_USB_MAIN_480M_CLK,
+	  REF_1M_CLK, PLL_SYS_PFD1_166M_CLK}
+	},
+	{CSI_MCLK_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{AUDIO_MCLK_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK}
+	},
+	{WRCLK_CLK_ROOT, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_ENET_MAIN_40M_CLK, PLL_DRAM_MAIN_533M_CLK,
+	  PLL_USB_MAIN_480M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_SYS_PFD2_270M_CLK,
+	  PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD7_CLK}
+	},
+	{IPP_DO_CLKO1, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_MAIN_240M_CLK,
+	  PLL_SYS_PFD0_196M_CLK, PLL_SYS_PFD3_CLK, PLL_ENET_MAIN_500M_CLK,
+	  PLL_DRAM_MAIN_533M_CLK, REF_1M_CLK}
+	},
+	{IPP_DO_CLKO2, CCM_IP_CHANNEL,
+	 {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_SYS_PFD0_392M_CLK,
+	  PLL_SYS_PFD1_166M_CLK, PLL_SYS_PFD4_CLK, PLL_AUDIO_MAIN_CLK,
+	  PLL_VIDEO_MAIN_CLK, OSC_32K_CLK}
+	},
+};
+
+/* select which entry of root_array */
+static int select(enum clk_root_index clock_id)
+{
+	int i, size;
+	struct clk_root_map *p = root_array;
+
+	size = ARRAY_SIZE(root_array);
+
+	for (i = 0; i < size; i++, p++) {
+		if (clock_id == p->entry)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int src_supported(int entry, enum clk_root_src clock_src)
+{
+	int i, size;
+	struct clk_root_map *p = &root_array[entry];
+
+	if ((p->type == CCM_DRAM_PHYM_CHANNEL) || (p->type == CCM_DRAM_CHANNEL))
+		size = 2;
+	else
+		size = 8;
+
+	for (i = 0; i < size; i++) {
+		if (p->src_mux[i] == clock_src)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+/* Set src for clock root slice. */
+int clock_set_src(enum clk_root_index clock_id, enum clk_root_src clock_src)
+{
+	int root_entry, src_entry;
+	u32 reg;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	src_entry = src_supported(root_entry, clock_src);
+	if (src_entry < 0)
+		return -EINVAL;
+
+	reg = __raw_readl(&imx_ccm->root[clock_id].target_root);
+	reg &= ~CLK_ROOT_MUX_MASK;
+	reg |= src_entry << CLK_ROOT_MUX_SHIFT;
+	__raw_writel(reg, &imx_ccm->root[clock_id].target_root);
+
+	return 0;
+}
+
+/* Get src of a clock root slice. */
+int clock_get_src(enum clk_root_index clock_id, enum clk_root_src *p_clock_src)
+{
+	u32 val;
+	int root_entry;
+	struct clk_root_map *p;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	val = __raw_readl(&imx_ccm->root[clock_id].target_root);
+	val &= CLK_ROOT_MUX_MASK;
+	val >>= CLK_ROOT_MUX_SHIFT;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+	*p_clock_src = p->src_mux[val];
+
+	return 0;
+}
+
+int clock_set_prediv(enum clk_root_index clock_id, enum root_pre_div pre_div)
+{
+	int root_entry;
+	struct clk_root_map *p;
+	u32 reg;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+
+	if ((p->type == CCM_CORE_CHANNEL) ||
+	    (p->type == CCM_DRAM_PHYM_CHANNEL) ||
+	    (p->type == CCM_DRAM_CHANNEL)) {
+		if (pre_div != CLK_ROOT_PRE_DIV1) {
+			printf("Error pre div!\n");
+			return -EINVAL;
+		}
+	}
+
+	reg = __raw_readl(&imx_ccm->root[clock_id].target_root);
+	reg &= ~CLK_ROOT_PRE_DIV_MASK;
+	reg |= pre_div << CLK_ROOT_PRE_DIV_SHIFT;
+	__raw_writel(reg, &imx_ccm->root[clock_id].target_root);
+
+	return 0;
+}
+
+int clock_get_prediv(enum clk_root_index clock_id, enum root_pre_div *pre_div)
+{
+	u32 val;
+	int root_entry;
+	struct clk_root_map *p;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+
+	if ((p->type == CCM_CORE_CHANNEL) ||
+	    (p->type == CCM_DRAM_PHYM_CHANNEL) ||
+	    (p->type == CCM_DRAM_CHANNEL)) {
+		*pre_div = 0;
+		return 0;
+	}
+
+	val = __raw_readl(&imx_ccm->root[clock_id].target_root);
+	val &= CLK_ROOT_PRE_DIV_MASK;
+	val >>= CLK_ROOT_PRE_DIV_SHIFT;
+
+	*pre_div = val;
+
+	return 0;
+}
+
+int clock_set_postdiv(enum clk_root_index clock_id, enum root_post_div div)
+{
+	u32 reg;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	if (clock_id == DRAM_PHYM_CLK_ROOT) {
+		if (div != CLK_ROOT_POST_DIV1) {
+			printf("Error post div!\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Only 3 bit post div. */
+	if ((clock_id == DRAM_CLK_ROOT) && (div > CLK_ROOT_POST_DIV7)) {
+		printf("Error post div!\n");
+		return -EINVAL;
+	}
+
+	reg = __raw_readl(&imx_ccm->root[clock_id].target_root);
+	reg &= ~CLK_ROOT_POST_DIV_MASK;
+	reg |= div << CLK_ROOT_POST_DIV_SHIFT;
+	__raw_writel(reg, &imx_ccm->root[clock_id].target_root);
+
+	return 0;
+}
+
+int clock_get_postdiv(enum clk_root_index clock_id, enum root_post_div *div)
+{
+	u32 val;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	if (clock_id == DRAM_PHYM_CLK_ROOT) {
+		*div = 0;
+		return 0;
+	}
+
+	val = __raw_readl(&imx_ccm->root[clock_id].target_root);
+	if (clock_id == DRAM_CLK_ROOT)
+		val &= DRAM_CLK_ROOT_POST_DIV_MASK;
+	else
+		val &= CLK_ROOT_POST_DIV_MASK;
+	val >>= CLK_ROOT_POST_DIV_SHIFT;
+
+	*div = val;
+
+	return 0;
+}
+
+int clock_set_autopostdiv(enum clk_root_index clock_id, enum root_auto_div div,
+			  int auto_en)
+{
+	u32 val;
+	int root_entry;
+	struct clk_root_map *p;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+
+	if ((p->type != CCM_BUS_CHANNEL) && (p->type != CCM_AHB_CHANNEL)) {
+		printf("Auto postdiv not supported.!\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Each time only one filed can be changed, no use target_root_set.
+	 */
+	val = __raw_readl(&imx_ccm->root[clock_id].target_root);
+	val &= ~CLK_ROOT_AUTO_DIV_MASK;
+	val |= (div << CLK_ROOT_AUTO_DIV_SHIFT);
+
+	if (auto_en)
+		val |= CLK_ROOT_AUTO_EN;
+	else
+		val &= ~CLK_ROOT_AUTO_EN;
+
+	__raw_writel(val, &imx_ccm->root[clock_id].target_root);
+
+	return 0;
+}
+
+int clock_get_autopostdiv(enum clk_root_index clock_id, enum root_auto_div *div,
+			  int *auto_en)
+{
+	u32 val;
+	int root_entry;
+	struct clk_root_map *p;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+
+	/*
+	 * Only bus/ahb channel supports auto div.
+	 * If unsupported, just set auto_en and div with 0.
+	 */
+	if ((p->type != CCM_BUS_CHANNEL) && (p->type != CCM_AHB_CHANNEL)) {
+		*auto_en = 0;
+		*div = 0;
+		return 0;
+	}
+
+	val = __raw_readl(&imx_ccm->root[clock_id].target_root);
+	if ((val & CLK_ROOT_AUTO_EN_MASK) == 0)
+		*auto_en = 0;
+	else
+		*auto_en = 1;
+
+	val &= CLK_ROOT_AUTO_DIV_MASK;
+	val >>= CLK_ROOT_AUTO_DIV_SHIFT;
+
+	*div = val;
+
+	return 0;
+}
+
+int clock_get_target_val(enum clk_root_index clock_id, u32 *val)
+{
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	*val = __raw_readl(&imx_ccm->root[clock_id].target_root);
+
+	return 0;
+}
+
+int clock_set_target_val(enum clk_root_index clock_id, u32 val)
+{
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	__raw_writel(val, &imx_ccm->root[clock_id].target_root);
+
+	return 0;
+}
+
+/* Auto_div and auto_en is ignored, they are rarely used. */
+int clock_root_cfg(enum clk_root_index clock_id, enum root_pre_div pre_div,
+		   enum root_post_div post_div, enum clk_root_src clock_src)
+{
+	u32 val;
+	int root_entry, src_entry;
+	struct clk_root_map *p;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	root_entry = select(clock_id);
+	if (root_entry < 0)
+		return -EINVAL;
+
+	p = &root_array[root_entry];
+
+	if ((p->type == CCM_CORE_CHANNEL) ||
+	    (p->type == CCM_DRAM_PHYM_CHANNEL) ||
+	    (p->type == CCM_DRAM_CHANNEL)) {
+		if (pre_div != CLK_ROOT_PRE_DIV1) {
+			printf("Error pre div!\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Only 3 bit post div. */
+	if (p->type == CCM_DRAM_CHANNEL) {
+		if (post_div > CLK_ROOT_POST_DIV7) {
+			printf("Error post div!\n");
+			return -EINVAL;
+		}
+	}
+
+	if (p->type == CCM_DRAM_PHYM_CHANNEL) {
+		if (post_div != CLK_ROOT_POST_DIV1) {
+			printf("Error post div!\n");
+			return -EINVAL;
+		}
+	}
+
+	src_entry = src_supported(root_entry, clock_src);
+	if (src_entry < 0)
+		return -EINVAL;
+
+	val = CLK_ROOT_ON | pre_div << CLK_ROOT_PRE_DIV_SHIFT |
+	      post_div << CLK_ROOT_POST_DIV_SHIFT |
+	      src_entry << CLK_ROOT_MUX_SHIFT;
+
+	__raw_writel(val, &imx_ccm->root[clock_id].target_root);
+
+	return 0;
+}
+
+int clock_root_enabled(enum clk_root_index clock_id)
+{
+	u32 val;
+
+	if (clock_id >= CLK_ROOT_MAX)
+		return -EINVAL;
+
+	/*
+	 * No enable bit for DRAM controller and PHY. Just return enabled.
+	 */
+	if ((clock_id == DRAM_PHYM_CLK_ROOT) || (clock_id == DRAM_CLK_ROOT))
+		return 1;
+
+	val = __raw_readl(&imx_ccm->root[clock_id].target_root);
+
+	return (val & CLK_ROOT_ENABLE_MASK) ? 1 : 0;
+}
+
+/* CCGR gate operation */
+int clock_enable(enum clk_ccgr_index index, bool enable)
+{
+	if (index >= CCGR_MAX)
+		return -EINVAL;
+
+	if (enable)
+		__raw_writel(CCM_CLK_ON_MSK,
+			     &imx_ccm->ccgr_array[index].ccgr_set);
+	else
+		__raw_writel(CCM_CLK_ON_MSK,
+			     &imx_ccm->ccgr_array[index].ccgr_clr);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/ddr.c b/roms/u-boot/arch/arm/mach-imx/mx7/ddr.c
new file mode 100644
index 000000000..cf2556976
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/ddr.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * DDR controller configuration for the i.MX7 architecture
+ *
+ * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx7-ddr.h>
+#include <common.h>
+#include <linux/delay.h>
+
+/*
+ * Routine: mx7_dram_cfg
+ * Description: DDR controller configuration
+ *
+ * @ddrc_regs_val: DDRC registers value
+ * @ddrc_mp_val: DDRC_MP registers value
+ * @ddr_phy_regs_val: DDR_PHY registers value
+ * @calib_param: calibration parameters
+ *
+ */
+void mx7_dram_cfg(struct ddrc *ddrc_regs_val, struct ddrc_mp *ddrc_mp_val,
+		  struct ddr_phy *ddr_phy_regs_val,
+		  struct mx7_calibration *calib_param)
+{
+	struct src *const src_regs = (struct src *)SRC_BASE_ADDR;
+	struct ddrc *const ddrc_regs = (struct ddrc *)DDRC_IPS_BASE_ADDR;
+	struct ddrc_mp *const ddrc_mp_reg = (struct ddrc_mp *)DDRC_MP_BASE_ADDR;
+	struct ddr_phy *const ddr_phy_regs =
+		(struct ddr_phy *)DDRPHY_IPS_BASE_ADDR;
+	struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+	int i;
+
+	/*
+	 * iMX7D RM 9.2.4.9.3 Power removal flow Table 9-11. Re-enabling power
+	 * row 2 says "Reset controller / PHY by driving core_ddrc_rst = 0 ,
+	 * aresetn_n = 0, presetn = 0. That means reset everything.
+	 */
+	writel(SRC_DDRC_RCR_DDRC_CORE_RST_MASK | SRC_DDRC_RCR_DDRC_PRST_MASK,
+	       &src_regs->ddrc_rcr);
+
+	/*
+	 * iMX7D RM 6.2.7.26 SRC_DDRC_RCR says wait 30 cycles (of unknown).
+	 * If we assume this is 30 cycles at 100 MHz (about the rate of a
+	 * DRAM bus), that's 300 nS, so waiting 10 uS is more then plenty.
+	 */
+	udelay(10);
+
+	/* De-assert DDR Controller 'preset' and DDR PHY reset */
+	clrbits_le32(&src_regs->ddrc_rcr, SRC_DDRC_RCR_DDRC_PRST_MASK);
+
+	/* DDR controller configuration */
+	writel(ddrc_regs_val->mstr, &ddrc_regs->mstr);
+	writel(ddrc_regs_val->rfshtmg, &ddrc_regs->rfshtmg);
+	writel(ddrc_mp_val->pctrl_0, &ddrc_mp_reg->pctrl_0);
+	writel(ddrc_regs_val->init1, &ddrc_regs->init1);
+	writel(ddrc_regs_val->init0, &ddrc_regs->init0);
+	writel(ddrc_regs_val->init3, &ddrc_regs->init3);
+	writel(ddrc_regs_val->init4, &ddrc_regs->init4);
+	writel(ddrc_regs_val->init5, &ddrc_regs->init5);
+	writel(ddrc_regs_val->rankctl, &ddrc_regs->rankctl);
+	writel(ddrc_regs_val->dramtmg0, &ddrc_regs->dramtmg0);
+	writel(ddrc_regs_val->dramtmg1, &ddrc_regs->dramtmg1);
+	writel(ddrc_regs_val->dramtmg2, &ddrc_regs->dramtmg2);
+	writel(ddrc_regs_val->dramtmg3, &ddrc_regs->dramtmg3);
+	writel(ddrc_regs_val->dramtmg4, &ddrc_regs->dramtmg4);
+	writel(ddrc_regs_val->dramtmg5, &ddrc_regs->dramtmg5);
+	writel(ddrc_regs_val->dramtmg8, &ddrc_regs->dramtmg8);
+	writel(ddrc_regs_val->zqctl0, &ddrc_regs->zqctl0);
+	writel(ddrc_regs_val->zqctl1, &ddrc_regs->zqctl1);
+	writel(ddrc_regs_val->dfitmg0, &ddrc_regs->dfitmg0);
+	writel(ddrc_regs_val->dfitmg1, &ddrc_regs->dfitmg1);
+	writel(ddrc_regs_val->dfiupd0, &ddrc_regs->dfiupd0);
+	writel(ddrc_regs_val->dfiupd1, &ddrc_regs->dfiupd1);
+	writel(ddrc_regs_val->dfiupd2, &ddrc_regs->dfiupd2);
+	writel(ddrc_regs_val->addrmap0, &ddrc_regs->addrmap0);
+	writel(ddrc_regs_val->addrmap1, &ddrc_regs->addrmap1);
+	writel(ddrc_regs_val->addrmap4, &ddrc_regs->addrmap4);
+	writel(ddrc_regs_val->addrmap5, &ddrc_regs->addrmap5);
+	writel(ddrc_regs_val->addrmap6, &ddrc_regs->addrmap6);
+	writel(ddrc_regs_val->odtcfg, &ddrc_regs->odtcfg);
+	writel(ddrc_regs_val->odtmap, &ddrc_regs->odtmap);
+
+	/* De-assert DDR Controller 'core_ddrc_rstn' and 'aresetn' */
+	clrbits_le32(&src_regs->ddrc_rcr, SRC_DDRC_RCR_DDRC_CORE_RST_MASK);
+
+	/* PHY configuration */
+	writel(ddr_phy_regs_val->phy_con0, &ddr_phy_regs->phy_con0);
+	writel(ddr_phy_regs_val->phy_con1, &ddr_phy_regs->phy_con1);
+	writel(ddr_phy_regs_val->phy_con4, &ddr_phy_regs->phy_con4);
+	writel(ddr_phy_regs_val->mdll_con0, &ddr_phy_regs->mdll_con0);
+	writel(ddr_phy_regs_val->drvds_con0, &ddr_phy_regs->drvds_con0);
+	writel(ddr_phy_regs_val->offset_wr_con0, &ddr_phy_regs->offset_wr_con0);
+	writel(ddr_phy_regs_val->offset_rd_con0, &ddr_phy_regs->offset_rd_con0);
+	writel(ddr_phy_regs_val->cmd_sdll_con0 |
+	       DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK,
+	       &ddr_phy_regs->cmd_sdll_con0);
+	writel(ddr_phy_regs_val->cmd_sdll_con0 &
+	       ~DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK,
+	       &ddr_phy_regs->cmd_sdll_con0);
+	writel(ddr_phy_regs_val->offset_lp_con0, &ddr_phy_regs->offset_lp_con0);
+	writel(ddr_phy_regs_val->cmd_deskew_con0,
+	       &ddr_phy_regs->cmd_deskew_con0);
+	writel(ddr_phy_regs_val->cmd_deskew_con1,
+	       &ddr_phy_regs->cmd_deskew_con1);
+	writel(ddr_phy_regs_val->cmd_deskew_con2,
+	       &ddr_phy_regs->cmd_deskew_con2);
+	writel(ddr_phy_regs_val->cmd_deskew_con3,
+	       &ddr_phy_regs->cmd_deskew_con3);
+	writel(ddr_phy_regs_val->cmd_lvl_con0, &ddr_phy_regs->cmd_lvl_con0);
+
+	/* calibration */
+	for (i = 0; i < calib_param->num_val; i++)
+		writel(calib_param->values[i], &ddr_phy_regs->zq_con0);
+
+	/* Wake_up DDR PHY */
+	HW_CCM_CCGR_WR(CCGR_IDX_DDR, CCM_CLK_ON_N_N);
+	writel(IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up(0xf) |
+	       IOMUXC_GPR_GPR8_ddr_phy_dfi_init_start_MASK,
+	       &iomuxc_gpr_regs->gpr[8]);
+	HW_CCM_CCGR_WR(CCGR_IDX_DDR, CCM_CLK_ON_R_W);
+}
+
+/*
+ * Routine: imx_ddr_size
+ * Description: extract the current DRAM size from the DDRC registers
+ *
+ * @return: DRAM size
+ */
+unsigned int imx_ddr_size(void)
+{
+	struct ddrc *const ddrc_regs = (struct ddrc *)DDRC_IPS_BASE_ADDR;
+	u32 reg_val, field_val;
+	int bits = 0;/* Number of address bits */
+
+	/* Count data bus width bits */
+	reg_val = readl(&ddrc_regs->mstr);
+	field_val = (reg_val & MSTR_DATA_BUS_WIDTH_MASK) >> MSTR_DATA_BUS_WIDTH_SHIFT;
+	bits += 2 - field_val;
+	/* Count rank address bits */
+	field_val = (reg_val & MSTR_DATA_ACTIVE_RANKS_MASK) >> MSTR_DATA_ACTIVE_RANKS_SHIFT;
+	if (field_val > 1)
+		bits += field_val - 1;
+	/* Count column address bits */
+	bits += 2;/* Column address 0 and 1 are fixed mapped */
+	reg_val = readl(&ddrc_regs->addrmap2);
+	field_val = (reg_val & ADDRMAP2_COL_B2_MASK) >> ADDRMAP2_COL_B2_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	field_val = (reg_val & ADDRMAP2_COL_B3_MASK) >> ADDRMAP2_COL_B3_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	field_val = (reg_val & ADDRMAP2_COL_B4_MASK) >> ADDRMAP2_COL_B4_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	field_val = (reg_val & ADDRMAP2_COL_B5_MASK) >> ADDRMAP2_COL_B5_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	reg_val = readl(&ddrc_regs->addrmap3);
+	field_val = (reg_val & ADDRMAP3_COL_B6_MASK) >> ADDRMAP3_COL_B6_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	field_val = (reg_val & ADDRMAP3_COL_B7_MASK) >> ADDRMAP3_COL_B7_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	field_val = (reg_val & ADDRMAP3_COL_B8_MASK) >> ADDRMAP3_COL_B8_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	field_val = (reg_val & ADDRMAP3_COL_B9_MASK) >> ADDRMAP3_COL_B9_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	reg_val = readl(&ddrc_regs->addrmap4);
+	field_val = (reg_val & ADDRMAP4_COL_B10_MASK) >> ADDRMAP4_COL_B10_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	field_val = (reg_val & ADDRMAP4_COL_B11_MASK) >> ADDRMAP4_COL_B11_SHIFT;
+	if (field_val <= 7)
+		bits++;
+	/* Count row address bits */
+	reg_val = readl(&ddrc_regs->addrmap5);
+	field_val = (reg_val & ADDRMAP5_ROW_B0_MASK) >> ADDRMAP5_ROW_B0_SHIFT;
+	if (field_val <= 11)
+		bits++;
+	field_val = (reg_val & ADDRMAP5_ROW_B1_MASK) >> ADDRMAP5_ROW_B1_SHIFT;
+	if (field_val <= 11)
+		bits++;
+	field_val = (reg_val & ADDRMAP5_ROW_B2_10_MASK) >> ADDRMAP5_ROW_B2_10_SHIFT;
+	if (field_val <= 11)
+		bits += 9;
+	field_val = (reg_val & ADDRMAP5_ROW_B11_MASK) >> ADDRMAP5_ROW_B11_SHIFT;
+	if (field_val <= 11)
+		bits++;
+	reg_val = readl(&ddrc_regs->addrmap6);
+	field_val = (reg_val & ADDRMAP6_ROW_B12_MASK) >> ADDRMAP6_ROW_B12_SHIFT;
+	if (field_val <= 11)
+		bits++;
+	field_val = (reg_val & ADDRMAP6_ROW_B13_MASK) >> ADDRMAP6_ROW_B13_SHIFT;
+	if (field_val <= 11)
+		bits++;
+	field_val = (reg_val & ADDRMAP6_ROW_B14_MASK) >> ADDRMAP6_ROW_B14_SHIFT;
+	if (field_val <= 11)
+		bits++;
+	field_val = (reg_val & ADDRMAP6_ROW_B15_MASK) >> ADDRMAP6_ROW_B15_SHIFT;
+	if (field_val <= 11)
+		bits++;
+	/* Count bank bits */
+	reg_val = readl(&ddrc_regs->addrmap1);
+	field_val = (reg_val & ADDRMAP1_BANK_B0_MASK) >> ADDRMAP1_BANK_B0_SHIFT;
+	if (field_val <= 30)
+		bits++;
+	field_val = (reg_val & ADDRMAP1_BANK_B1_MASK) >> ADDRMAP1_BANK_B1_SHIFT;
+	if (field_val <= 30)
+		bits++;
+	field_val = (reg_val & ADDRMAP1_BANK_B2_MASK) >> ADDRMAP1_BANK_B2_SHIFT;
+	if (field_val <= 29)
+		bits++;
+
+	/* cap to max 2 GB */
+	if (bits > 31)
+		bits = 31;
+
+	return 1 << bits;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/psci-mx7.c b/roms/u-boot/arch/arm/mach-imx/mx7/psci-mx7.c
new file mode 100644
index 000000000..f32945ea3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/psci-mx7.c
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <cpu_func.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/psci.h>
+#include <asm/secure.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/armv7.h>
+#include <asm/gic.h>
+#include <linux/bitops.h>
+#include <common.h>
+#include <fsl_wdog.h>
+
+#define GPC_LPCR_A7_BSC	0x0
+#define GPC_LPCR_A7_AD		0x4
+#define GPC_SLPCR		0x14
+#define GPC_PGC_ACK_SEL_A7	0x24
+#define GPC_IMR1_CORE0		0x30
+#define GPC_SLOT0_CFG		0xb0
+#define GPC_CPU_PGC_SW_PUP_REQ	0xf0
+#define GPC_CPU_PGC_SW_PDN_REQ	0xfc
+#define GPC_PGC_C0		0x800
+#define GPC_PGC_C0		0x800
+#define GPC_PGC_C1		0x840
+#define GPC_PGC_SCU		0x880
+
+#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM		0x4000
+#define BM_LPCR_A7_BSC_LPM1			0xc
+#define BM_LPCR_A7_BSC_LPM0			0x3
+#define BP_LPCR_A7_BSC_LPM0			0
+#define BM_SLPCR_EN_DSM				0x80000000
+#define BM_SLPCR_RBC_EN				0x40000000
+#define BM_SLPCR_REG_BYPASS_COUNT		0x3f000000
+#define BM_SLPCR_VSTBY				0x4
+#define BM_SLPCR_SBYOS				0x2
+#define BM_SLPCR_BYPASS_PMIC_READY		0x1
+#define BM_LPCR_A7_AD_L2PGE			0x10000
+#define BM_LPCR_A7_AD_EN_C1_PUP			0x800
+#define BM_LPCR_A7_AD_EN_C0_PUP			0x200
+#define BM_LPCR_A7_AD_EN_PLAT_PDN		0x10
+#define BM_LPCR_A7_AD_EN_C1_PDN			0x8
+#define BM_LPCR_A7_AD_EN_C0_PDN			0x2
+
+#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE0_A7	0x1
+#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7	0x2
+
+#define BM_GPC_PGC_ACK_SEL_A7_PD_DUMMY_ACK	0x8000
+#define BM_GPC_PGC_ACK_SEL_A7_PU_DUMMY_ACK	0x80000000
+
+#define MAX_SLOT_NUMBER				10
+#define A7_LPM_WAIT				0x5
+#define A7_LPM_STOP				0xa
+
+#define BM_SYS_COUNTER_CNTCR_FCR1 0x200
+#define BM_SYS_COUNTER_CNTCR_FCR0 0x100
+
+#define REG_SET		0x4
+#define REG_CLR		0x8
+
+#define ANADIG_ARM_PLL		0x60
+#define ANADIG_DDR_PLL		0x70
+#define ANADIG_SYS_PLL		0xb0
+#define ANADIG_ENET_PLL		0xe0
+#define ANADIG_AUDIO_PLL	0xf0
+#define ANADIG_VIDEO_PLL	0x130
+#define BM_ANATOP_ARM_PLL_OVERRIDE	BIT(20)
+#define BM_ANATOP_DDR_PLL_OVERRIDE	BIT(19)
+#define BM_ANATOP_SYS_PLL_OVERRIDE	(0x1ff << 17)
+#define BM_ANATOP_ENET_PLL_OVERRIDE	BIT(13)
+#define BM_ANATOP_AUDIO_PLL_OVERRIDE	BIT(24)
+#define BM_ANATOP_VIDEO_PLL_OVERRIDE	BIT(24)
+
+#define DDRC_STAT	0x4
+#define DDRC_PWRCTL	0x30
+#define DDRC_PSTAT	0x3fc
+
+#define SRC_GPR1_MX7D		0x074
+#define SRC_GPR2_MX7D		0x078
+#define SRC_A7RCR0		0x004
+#define SRC_A7RCR1		0x008
+
+#define BP_SRC_A7RCR0_A7_CORE_RESET0	0
+#define BP_SRC_A7RCR1_A7_CORE1_ENABLE	1
+
+#define SNVS_LPCR		0x38
+#define BP_SNVS_LPCR_DP_EN	0x20
+#define BP_SNVS_LPCR_TOP	0x40
+
+#define CCM_CCGR_SNVS		0x4250
+
+#define CCM_ROOT_WDOG		0xbb80
+#define CCM_CCGR_WDOG1		0x49c0
+
+#define MPIDR_AFF0		GENMASK(7, 0)
+
+#define IMX7D_PSCI_NR_CPUS	2
+#if IMX7D_PSCI_NR_CPUS > CONFIG_ARMV7_PSCI_NR_CPUS
+#error "invalid value for CONFIG_ARMV7_PSCI_NR_CPUS"
+#endif
+
+#define imx_cpu_gpr_entry_offset(cpu) \
+	(SRC_BASE_ADDR + SRC_GPR1_MX7D + cpu * 8)
+#define imx_cpu_gpr_para_offset(cpu) \
+	(imx_cpu_gpr_entry_offset(cpu) + 4)
+
+#define IMX_CPU_SYNC_OFF	~0
+#define IMX_CPU_SYNC_ON		0
+
+u8 psci_state[IMX7D_PSCI_NR_CPUS] __secure_data = {
+	 PSCI_AFFINITY_LEVEL_ON,
+	 PSCI_AFFINITY_LEVEL_OFF};
+
+enum imx_gpc_slot {
+	CORE0_A7,
+	CORE1_A7,
+	SCU_A7,
+	FAST_MEGA_MIX,
+	MIPI_PHY,
+	PCIE_PHY,
+	USB_OTG1_PHY,
+	USB_OTG2_PHY,
+	USB_HSIC_PHY,
+	CORE0_M4,
+};
+
+enum mxc_cpu_pwr_mode {
+	RUN,
+	WAIT,
+	STOP,
+};
+
+extern void psci_system_resume(void);
+
+static inline void psci_set_state(int cpu, u8 state)
+{
+	psci_state[cpu] = state;
+	dsb();
+	isb();
+}
+
+static inline void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
+{
+	writel(enable, GPC_IPS_BASE_ADDR + offset);
+}
+
+__secure void imx_gpcv2_set_core_power(int cpu, bool pdn)
+{
+	u32 reg = pdn ? GPC_CPU_PGC_SW_PUP_REQ : GPC_CPU_PGC_SW_PDN_REQ;
+	u32 pgc = cpu ? GPC_PGC_C1 : GPC_PGC_C0;
+	u32 pdn_pup_req = cpu ? BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 :
+				BM_CPU_PGC_SW_PDN_PUP_REQ_CORE0_A7;
+	u32 val;
+
+	imx_gpcv2_set_m_core_pgc(true, pgc);
+
+	val = readl(GPC_IPS_BASE_ADDR + reg);
+	val |= pdn_pup_req;
+	writel(val, GPC_IPS_BASE_ADDR + reg);
+
+	while ((readl(GPC_IPS_BASE_ADDR + reg) & pdn_pup_req) != 0)
+		;
+
+	imx_gpcv2_set_m_core_pgc(false, pgc);
+}
+
+__secure void imx_enable_cpu_ca7(int cpu, bool enable)
+{
+	u32 mask, val;
+
+	mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1);
+	val = readl(SRC_BASE_ADDR + SRC_A7RCR1);
+	val = enable ? val | mask : val & ~mask;
+	writel(val, SRC_BASE_ADDR + SRC_A7RCR1);
+}
+
+__secure void psci_arch_cpu_entry(void)
+{
+	u32 cpu = psci_get_cpu_id();
+
+	psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON);
+}
+
+__secure s32 psci_cpu_on(u32 __always_unused function_id, u32 mpidr, u32 ep,
+			 u32 context_id)
+{
+	u32 cpu = mpidr & MPIDR_AFF0;
+
+	if (mpidr & ~MPIDR_AFF0)
+		return ARM_PSCI_RET_INVAL;
+
+	if (cpu >= IMX7D_PSCI_NR_CPUS)
+		return ARM_PSCI_RET_INVAL;
+
+	if (psci_state[cpu] == PSCI_AFFINITY_LEVEL_ON)
+		return ARM_PSCI_RET_ALREADY_ON;
+
+	if (psci_state[cpu] == PSCI_AFFINITY_LEVEL_ON_PENDING)
+		return ARM_PSCI_RET_ON_PENDING;
+
+	psci_save(cpu, ep, context_id);
+
+	writel((u32)psci_cpu_entry, imx_cpu_gpr_entry_offset(cpu));
+
+	psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON_PENDING);
+
+	imx_gpcv2_set_core_power(cpu, true);
+	imx_enable_cpu_ca7(cpu, true);
+
+	return ARM_PSCI_RET_SUCCESS;
+}
+
+__secure s32 psci_cpu_off(void)
+{
+	int cpu;
+
+	cpu = psci_get_cpu_id();
+
+	psci_cpu_off_common();
+	psci_set_state(cpu, PSCI_AFFINITY_LEVEL_OFF);
+
+	imx_enable_cpu_ca7(cpu, false);
+	imx_gpcv2_set_core_power(cpu, false);
+	/*
+	 * We use the cpu jumping argument register to sync with
+	 * psci_affinity_info() which is running on cpu0 to kill the cpu.
+	 */
+	writel(IMX_CPU_SYNC_OFF, imx_cpu_gpr_para_offset(cpu));
+
+	while (1)
+		wfi();
+}
+
+__secure void psci_system_reset(void)
+{
+	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+	/* make sure WDOG1 clock is enabled */
+	writel(0x1 << 28, CCM_BASE_ADDR + CCM_ROOT_WDOG);
+	writel(0x3, CCM_BASE_ADDR + CCM_CCGR_WDOG1);
+	writew(WCR_WDE, &wdog->wcr);
+
+	while (1)
+		wfi();
+}
+
+__secure void psci_system_off(void)
+{
+	u32 val;
+
+	/* make sure SNVS clock is enabled */
+	writel(0x3, CCM_BASE_ADDR + CCM_CCGR_SNVS);
+
+	val = readl(SNVS_BASE_ADDR + SNVS_LPCR);
+	val |= BP_SNVS_LPCR_DP_EN | BP_SNVS_LPCR_TOP;
+	writel(val, SNVS_BASE_ADDR + SNVS_LPCR);
+
+	while (1)
+		wfi();
+}
+
+__secure u32 psci_version(void)
+{
+	return ARM_PSCI_VER_1_0;
+}
+
+__secure s32 psci_cpu_suspend(u32 __always_unused function_id, u32 power_state,
+			      u32 entry_point_address,
+			      u32 context_id)
+{
+	return ARM_PSCI_RET_INVAL;
+}
+
+__secure s32 psci_affinity_info(u32 __always_unused function_id,
+				u32 target_affinity,
+				u32 lowest_affinity_level)
+{
+	u32 cpu = target_affinity & MPIDR_AFF0;
+
+	if (lowest_affinity_level > 0)
+		return ARM_PSCI_RET_INVAL;
+
+	if (target_affinity & ~MPIDR_AFF0)
+		return ARM_PSCI_RET_INVAL;
+
+	if (cpu >= IMX7D_PSCI_NR_CPUS)
+		return ARM_PSCI_RET_INVAL;
+
+	/* CPU is waiting for killed */
+	if (readl(imx_cpu_gpr_para_offset(cpu)) == IMX_CPU_SYNC_OFF) {
+		imx_enable_cpu_ca7(cpu, false);
+		imx_gpcv2_set_core_power(cpu, false);
+		writel(IMX_CPU_SYNC_ON, imx_cpu_gpr_para_offset(cpu));
+	}
+
+	return psci_state[cpu];
+}
+
+__secure u32 psci_migrate_info_type(void)
+{
+	/* Trusted OS is either not present or does not require migration */
+	return 2;
+}
+
+__secure s32 psci_features(u32 __always_unused function_id, u32 psci_fid)
+{
+	switch (psci_fid) {
+	case ARM_PSCI_0_2_FN_PSCI_VERSION:
+	case ARM_PSCI_0_2_FN_CPU_OFF:
+	case ARM_PSCI_0_2_FN_CPU_ON:
+	case ARM_PSCI_0_2_FN_AFFINITY_INFO:
+	case ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE:
+	case ARM_PSCI_0_2_FN_SYSTEM_OFF:
+	case ARM_PSCI_0_2_FN_SYSTEM_RESET:
+	case ARM_PSCI_1_0_FN_PSCI_FEATURES:
+	case ARM_PSCI_1_0_FN_SYSTEM_SUSPEND:
+		return 0x0;
+	}
+	return ARM_PSCI_RET_NI;
+}
+
+static __secure void imx_gpcv2_set_lpm_mode(enum mxc_cpu_pwr_mode mode)
+{
+	u32 val1, val2, val3;
+
+	val1 = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_BSC);
+	val2 = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
+
+	/* all cores' LPM settings must be same */
+	val1 &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
+	val1 |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+
+	val2 &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN |
+		BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
+	/*
+	 * GPC: When improper low-power sequence is used,
+	 * the SoC enters low power mode before the ARM core executes WFI.
+	 *
+	 * Software workaround:
+	 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
+	 *    by setting IOMUX_GPR1_IRQ.
+	 * 2) Software should then unmask IRQ #32 in GPC before setting GPC
+	 *    Low-Power mode.
+	 * 3) Software should mask IRQ #32 right after GPC Low-Power mode
+	 *    is set.
+	 */
+	switch (mode) {
+	case RUN:
+		val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
+		val3 &= ~0x1;
+		writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
+		break;
+	case WAIT:
+		val1 |= A7_LPM_WAIT << BP_LPCR_A7_BSC_LPM0;
+		val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+		val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
+		val3 &= ~0x1;
+		writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
+		break;
+	case STOP:
+		val1 |= A7_LPM_STOP << BP_LPCR_A7_BSC_LPM0;
+		val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+		val2 |= BM_SLPCR_EN_DSM;
+		val2 |= BM_SLPCR_SBYOS;
+		val2 |= BM_SLPCR_VSTBY;
+		val2 |= BM_SLPCR_BYPASS_PMIC_READY;
+		val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
+		val3 |= 0x1;
+		writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0);
+		break;
+	default:
+		return;
+	}
+	writel(val1, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_BSC);
+	writel(val2, GPC_IPS_BASE_ADDR + GPC_SLPCR);
+}
+
+static __secure void imx_gpcv2_set_plat_power_gate_by_lpm(bool pdn)
+{
+	u32 val = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD);
+
+	val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
+	if (pdn)
+		val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
+
+	writel(val, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD);
+}
+
+static __secure void imx_gpcv2_set_cpu_power_gate_by_lpm(u32 cpu, bool pdn)
+{
+	u32 val;
+
+	val = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD);
+	if (cpu == 0) {
+		if (pdn)
+			val |= BM_LPCR_A7_AD_EN_C0_PDN |
+				BM_LPCR_A7_AD_EN_C0_PUP;
+		else
+			val &= ~(BM_LPCR_A7_AD_EN_C0_PDN |
+				BM_LPCR_A7_AD_EN_C0_PUP);
+	}
+	if (cpu == 1) {
+		if (pdn)
+			val |= BM_LPCR_A7_AD_EN_C1_PDN |
+				BM_LPCR_A7_AD_EN_C1_PUP;
+		else
+			val &= ~(BM_LPCR_A7_AD_EN_C1_PDN |
+				BM_LPCR_A7_AD_EN_C1_PUP);
+	}
+	writel(val, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD);
+}
+
+static __secure void imx_gpcv2_set_slot_ack(u32 index, enum imx_gpc_slot m_core,
+					    bool mode, bool ack)
+{
+	u32 val;
+
+	if (index >= MAX_SLOT_NUMBER)
+		return;
+
+	/* set slot */
+	writel(readl(GPC_IPS_BASE_ADDR + GPC_SLOT0_CFG + index * 4) |
+		((mode + 1) << (m_core * 2)),
+		GPC_IPS_BASE_ADDR + GPC_SLOT0_CFG + index * 4);
+
+	if (ack) {
+		/* set ack */
+		val = readl(GPC_IPS_BASE_ADDR + GPC_PGC_ACK_SEL_A7);
+		/* clear dummy ack */
+		val &= ~(mode ? BM_GPC_PGC_ACK_SEL_A7_PU_DUMMY_ACK :
+			BM_GPC_PGC_ACK_SEL_A7_PD_DUMMY_ACK);
+		val |= 1 << (m_core + (mode ? 16 : 0));
+		writel(val, GPC_IPS_BASE_ADDR + GPC_PGC_ACK_SEL_A7);
+	}
+}
+
+static __secure void imx_system_counter_resume(void)
+{
+	u32 val;
+
+	val = readl(SYSCNT_CTRL_IPS_BASE_ADDR);
+	val &= ~BM_SYS_COUNTER_CNTCR_FCR1;
+	val |= BM_SYS_COUNTER_CNTCR_FCR0;
+	writel(val, SYSCNT_CTRL_IPS_BASE_ADDR);
+}
+
+static __secure void imx_system_counter_suspend(void)
+{
+	u32 val;
+
+	val = readl(SYSCNT_CTRL_IPS_BASE_ADDR);
+	val &= ~BM_SYS_COUNTER_CNTCR_FCR0;
+	val |= BM_SYS_COUNTER_CNTCR_FCR1;
+	writel(val, SYSCNT_CTRL_IPS_BASE_ADDR);
+}
+
+static __secure void gic_resume(void)
+{
+	u32 itlinesnr, i;
+	u32 gic_dist_addr = GIC400_ARB_BASE_ADDR + GIC_DIST_OFFSET;
+
+	/* enable the GIC distributor */
+	writel(readl(gic_dist_addr + GICD_CTLR) | 0x03,
+	       gic_dist_addr + GICD_CTLR);
+
+	/* TYPER[4:0] contains an encoded number of available interrupts */
+	itlinesnr = readl(gic_dist_addr + GICD_TYPER) & 0x1f;
+
+	/* set all bits in the GIC group registers to one to allow access
+	 * from non-secure state. The first 32 interrupts are private per
+	 * CPU and will be set later when enabling the GIC for each core
+	 */
+	for (i = 1; i <= itlinesnr; i++)
+		writel((u32)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
+}
+
+static inline void imx_pll_suspend(void)
+{
+	writel(BM_ANATOP_ARM_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_ARM_PLL + REG_SET);
+	writel(BM_ANATOP_DDR_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_DDR_PLL + REG_SET);
+	writel(BM_ANATOP_SYS_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_SYS_PLL + REG_SET);
+	writel(BM_ANATOP_ENET_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_ENET_PLL + REG_SET);
+	writel(BM_ANATOP_AUDIO_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_AUDIO_PLL + REG_SET);
+	writel(BM_ANATOP_VIDEO_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_VIDEO_PLL + REG_SET);
+}
+
+static inline void imx_pll_resume(void)
+{
+	writel(BM_ANATOP_ARM_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_ARM_PLL + REG_CLR);
+	writel(BM_ANATOP_DDR_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_DDR_PLL + REG_CLR);
+	writel(BM_ANATOP_SYS_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_SYS_PLL + REG_CLR);
+	writel(BM_ANATOP_ENET_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_ENET_PLL + REG_CLR);
+	writel(BM_ANATOP_AUDIO_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_AUDIO_PLL + REG_CLR);
+	writel(BM_ANATOP_VIDEO_PLL_OVERRIDE,
+	       ANATOP_BASE_ADDR + ANADIG_VIDEO_PLL + REG_CLR);
+}
+
+static inline void imx_udelay(u32 usec)
+{
+	u32 freq;
+	u64 start, end;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+	asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (start));
+	do {
+		asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (end));
+		if ((end - start) > usec * (freq / 1000000))
+			break;
+	} while (1);
+}
+
+static inline void imx_ddrc_enter_self_refresh(void)
+{
+	writel(0, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
+	while (readl(DDRC_IPS_BASE_ADDR + DDRC_PSTAT) & 0x10001)
+		;
+
+	writel(0x20, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
+	while ((readl(DDRC_IPS_BASE_ADDR + DDRC_STAT) & 0x23) != 0x23)
+		;
+	writel(readl(DDRC_IPS_BASE_ADDR + DDRC_PWRCTL) | 0x8,
+	       DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
+}
+
+static inline void imx_ddrc_exit_self_refresh(void)
+{
+	writel(0, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
+	while ((readl(DDRC_IPS_BASE_ADDR + DDRC_STAT) & 0x3) == 0x3)
+		;
+	writel(readl(DDRC_IPS_BASE_ADDR + DDRC_PWRCTL) | 0x1,
+	       DDRC_IPS_BASE_ADDR + DDRC_PWRCTL);
+}
+
+__secure void imx_system_resume(void)
+{
+	unsigned int i, val, imr[4], entry;
+
+	entry = psci_get_target_pc(0);
+	imx_ddrc_exit_self_refresh();
+	imx_system_counter_resume();
+	imx_gpcv2_set_lpm_mode(RUN);
+	imx_gpcv2_set_cpu_power_gate_by_lpm(0, false);
+	imx_gpcv2_set_plat_power_gate_by_lpm(false);
+	imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C0);
+	imx_gpcv2_set_m_core_pgc(false, GPC_PGC_SCU);
+
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	for (i = 0; i < 4; i++) {
+		imr[i] = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
+		writel(~0, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
+	}
+
+	/* configure RBC enable bit */
+	val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
+	val &= ~BM_SLPCR_RBC_EN;
+	writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
+
+	/* configure RBC count */
+	val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
+	val &= ~BM_SLPCR_REG_BYPASS_COUNT;
+	writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	imx_udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	for (i = 0; i < 4; i++)
+		writel(imr[i], GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
+
+	/* initialize gic distributor */
+	gic_resume();
+	_nonsec_init();
+
+	/* save cpu0 entry */
+	psci_save(0, entry, 0);
+	psci_cpu_entry();
+}
+
+__secure void psci_system_suspend(u32 __always_unused function_id,
+				  u32 ep, u32 context_id)
+{
+	u32 gpc_mask[4];
+	u32 i, val;
+
+	psci_save(0, ep, context_id);
+	/* overwrite PLL to be controlled by low power mode */
+	imx_pll_suspend();
+	imx_system_counter_suspend();
+	/* set CA7 platform to enter STOP mode */
+	imx_gpcv2_set_lpm_mode(STOP);
+	/* enable core0/scu power down/up with low power mode */
+	imx_gpcv2_set_cpu_power_gate_by_lpm(0, true);
+	imx_gpcv2_set_plat_power_gate_by_lpm(true);
+	/* time slot settings for core0 and scu */
+	imx_gpcv2_set_slot_ack(0, CORE0_A7, false, false);
+	imx_gpcv2_set_slot_ack(1, SCU_A7, false, true);
+	imx_gpcv2_set_slot_ack(5, SCU_A7, true, false);
+	imx_gpcv2_set_slot_ack(6, CORE0_A7, true, true);
+	imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C0);
+	imx_gpcv2_set_m_core_pgc(true, GPC_PGC_SCU);
+	psci_v7_flush_dcache_all();
+
+	imx_ddrc_enter_self_refresh();
+
+	/*
+	 * e10133: ARM: Boot failure after A7 enters into
+	 * low-power idle mode
+	 *
+	 * Workaround:
+	 * If both CPU0/CPU1 are IDLE, the last IDLE CPU should
+	 * disable GIC first, then REG_BYPASS_COUNTER is used
+	 * to mask wakeup INT, and then execute “wfi� is used to
+	 * bring the system into power down processing safely.
+	 * The counter must be enabled as close to the “wfi� state
+	 * as possible. The following equation can be used to
+	 * determine the RBC counter value:
+	 * RBC_COUNT * (1/32K RTC frequency) >=
+	 * (46 + PDNSCR_SW + PDNSCR_SW2ISO ) ( 1/IPG_CLK frequency ).
+	 */
+
+	/* disable GIC distributor */
+	writel(0, GIC400_ARB_BASE_ADDR + GIC_DIST_OFFSET);
+
+	for (i = 0; i < 4; i++)
+		gpc_mask[i] = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
+
+	/*
+	 * enable the RBC bypass counter here
+	 * to hold off the interrupts. RBC counter
+	 * = 8 (240us). With this setting, the latency
+	 * from wakeup interrupt to ARM power up
+	 * is ~250uS.
+	 */
+	val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
+	val &= ~(0x3f << 24);
+	val |= (0x8 << 24);
+	writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
+
+	/* enable the counter. */
+	val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
+	val |= (1 << 30);
+	writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
+
+	/* unmask all the GPC interrupts. */
+	for (i = 0; i < 4; i++)
+		writel(gpc_mask[i], GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
+
+	/*
+	 * now delay for a short while (3usec)
+	 * ARM is at 1GHz at this point
+	 * so a short loop should be enough.
+	 * this delay is required to ensure that
+	 * the RBC counter can start counting in
+	 * case an interrupt is already pending
+	 * or in case an interrupt arrives just
+	 * as ARM is about to assert DSM_request.
+	 */
+	imx_udelay(3);
+
+	/* save resume entry and sp in CPU0 GPR registers */
+	asm volatile("mov %0, sp" : "=r" (val));
+	writel((u32)psci_system_resume, SRC_BASE_ADDR + SRC_GPR1_MX7D);
+	writel(val, SRC_BASE_ADDR + SRC_GPR2_MX7D);
+
+	/* sleep */
+	while (1)
+		wfi();
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/psci-suspend.S b/roms/u-boot/arch/arm/mach-imx/mx7/psci-suspend.S
new file mode 100644
index 000000000..a21403f73
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/psci-suspend.S
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+#include <asm/armv7.h>
+#include <asm/psci.h>
+
+	.pushsection ._secure.text, "ax"
+
+	.arch_extension sec
+
+.globl v7_invalidate_l1
+v7_invalidate_l1:
+	mov	r0, #0
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	movw	r1, #0x7fff
+	and	r2, r1, r0, lsr #13
+
+	movw	r1, #0x3ff
+
+	and	r3, r1, r0, lsr #3      @ NumWays - 1
+	add	r2, r2, #1              @ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4      @ SetShift
+
+	clz	r1, r3          @ WayShift
+	add	r4, r3, #1      @ NumWays
+1:
+	sub	r2, r2, #1      @ NumSets--
+	mov	r3, r4          @ Temp = NumWays
+2:
+	subs	r3, r3, #1      @ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6      @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb	st
+	isb
+	mov	pc, lr
+
+.globl psci_system_resume
+psci_system_resume:
+	mov	sp, r0
+
+	/* invalidate L1 I-cache first */
+	mov	r6, #0x0
+	mcr	p15, 0, r6, c7, c5, 0
+	mcr	p15, 0, r6, c7, c5, 6
+	/* enable the Icache and branch prediction */
+	mov	r6, #0x1800
+	mcr	p15, 0, r6, c1, c0, 0
+	isb
+
+	bl	v7_invalidate_l1
+	b	imx_system_resume
+
+	.popsection
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/snvs.c b/roms/u-boot/arch/arm/mach-imx/mx7/snvs.c
new file mode 100644
index 000000000..359bbbb41
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/snvs.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Linaro
+ */
+
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <linux/bitops.h>
+
+#define SNVS_HPCOMR		0x04
+#define SNVS_HPCOMR_NPSWA_EN	BIT(31)
+
+void init_snvs(void)
+{
+	u32 val;
+
+	/* Ensure SNVS HPCOMR sets NPSWA_EN to allow unpriv access to SNVS LP */
+	val = readl(SNVS_BASE_ADDR + SNVS_HPCOMR);
+	val |= SNVS_HPCOMR_NPSWA_EN;
+	writel(val, SNVS_BASE_ADDR + SNVS_HPCOMR);
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7/soc.c b/roms/u-boot/arch/arm/mach-imx/mx7/soc.c
new file mode 100644
index 000000000..fda25ba66
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7/soc.c
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/dma.h>
+#include <asm/mach-imx/hab.h>
+#include <asm/mach-imx/rdc-sema.h>
+#include <asm/arch/imx-rdc.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/arch/crm_regs.h>
+#include <dm.h>
+#include <env.h>
+#include <imx_thermal.h>
+#include <fsl_sec.h>
+#include <asm/setup.h>
+#include <linux/delay.h>
+
+#define IOMUXC_GPR1		0x4
+#define BM_IOMUXC_GPR1_IRQ	0x1000
+
+#define GPC_LPCR_A7_BSC		0x0
+#define GPC_LPCR_M4		0x8
+#define GPC_SLPCR		0x14
+#define GPC_PGC_ACK_SEL_A7	0x24
+#define GPC_IMR1_CORE0		0x30
+#define GPC_IMR1_CORE1		0x40
+#define GPC_IMR1_M4		0x50
+#define GPC_PGC_CPU_MAPPING	0xec
+#define GPC_PGC_C0_PUPSCR	0x804
+#define GPC_PGC_SCU_TIMING	0x890
+#define GPC_PGC_C1_PUPSCR	0x844
+
+#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP	0x70000000
+#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM		0x4000
+#define BM_LPCR_M4_MASK_DSM_TRIGGER		0x80000000
+#define BM_SLPCR_EN_DSM				0x80000000
+#define BM_SLPCR_RBC_EN				0x40000000
+#define BM_SLPCR_REG_BYPASS_COUNT		0x3f000000
+#define BM_SLPCR_VSTBY				0x4
+#define BM_SLPCR_SBYOS				0x2
+#define BM_SLPCR_BYPASS_PMIC_READY		0x1
+#define BM_SLPCR_EN_A7_FASTWUP_WAIT_MODE	0x10000
+
+#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP_ACK	0x80000000
+#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN_ACK	0x8000
+
+#define BM_GPC_PGC_CORE_PUPSCR			0x7fff80
+
+#if defined(CONFIG_IMX_THERMAL)
+static const struct imx_thermal_plat imx7_thermal_plat = {
+	.regs = (void *)ANATOP_BASE_ADDR,
+	.fuse_bank = 3,
+	.fuse_word = 3,
+};
+
+U_BOOT_DRVINFO(imx7_thermal) = {
+	.name = "imx_thermal",
+	.plat = &imx7_thermal_plat,
+};
+#endif
+
+#if CONFIG_IS_ENABLED(IMX_RDC)
+/*
+ * In current design, if any peripheral was assigned to both A7 and M4,
+ * it will receive ipg_stop or ipg_wait when any of the 2 platforms enter
+ * low power mode. So M4 sleep will cause some peripherals fail to work
+ * at A7 core side. At default, all resources are in domain 0 - 3.
+ *
+ * There are 26 peripherals impacted by this IC issue:
+ * SIM2(sim2/emvsim2)
+ * SIM1(sim1/emvsim1)
+ * UART1/UART2/UART3/UART4/UART5/UART6/UART7
+ * SAI1/SAI2/SAI3
+ * WDOG1/WDOG2/WDOG3/WDOG4
+ * GPT1/GPT2/GPT3/GPT4
+ * PWM1/PWM2/PWM3/PWM4
+ * ENET1/ENET2
+ * Software Workaround:
+ * Here we setup some resources to domain 0 where M4 codes will move
+ * the M4 out of this domain. Then M4 is not able to access them any longer.
+ * This is a workaround for ic issue. So the peripherals are not shared
+ * by them. This way requires the uboot implemented the RDC driver and
+ * set the 26 IPs above to domain 0 only. M4 code will assign resource
+ * to its own domain, if it want to use the resource.
+ */
+static rdc_peri_cfg_t const resources[] = {
+	(RDC_PER_SIM1 | RDC_DOMAIN(0)),
+	(RDC_PER_SIM2 | RDC_DOMAIN(0)),
+	(RDC_PER_UART1 | RDC_DOMAIN(0)),
+	(RDC_PER_UART2 | RDC_DOMAIN(0)),
+	(RDC_PER_UART3 | RDC_DOMAIN(0)),
+	(RDC_PER_UART4 | RDC_DOMAIN(0)),
+	(RDC_PER_UART5 | RDC_DOMAIN(0)),
+	(RDC_PER_UART6 | RDC_DOMAIN(0)),
+	(RDC_PER_UART7 | RDC_DOMAIN(0)),
+	(RDC_PER_SAI1 | RDC_DOMAIN(0)),
+	(RDC_PER_SAI2 | RDC_DOMAIN(0)),
+	(RDC_PER_SAI3 | RDC_DOMAIN(0)),
+	(RDC_PER_WDOG1 | RDC_DOMAIN(0)),
+	(RDC_PER_WDOG2 | RDC_DOMAIN(0)),
+	(RDC_PER_WDOG3 | RDC_DOMAIN(0)),
+	(RDC_PER_WDOG4 | RDC_DOMAIN(0)),
+	(RDC_PER_GPT1 | RDC_DOMAIN(0)),
+	(RDC_PER_GPT2 | RDC_DOMAIN(0)),
+	(RDC_PER_GPT3 | RDC_DOMAIN(0)),
+	(RDC_PER_GPT4 | RDC_DOMAIN(0)),
+	(RDC_PER_PWM1 | RDC_DOMAIN(0)),
+	(RDC_PER_PWM2 | RDC_DOMAIN(0)),
+	(RDC_PER_PWM3 | RDC_DOMAIN(0)),
+	(RDC_PER_PWM4 | RDC_DOMAIN(0)),
+	(RDC_PER_ENET1 | RDC_DOMAIN(0)),
+	(RDC_PER_ENET2 | RDC_DOMAIN(0)),
+};
+
+static void isolate_resource(void)
+{
+	imx_rdc_setup_peripherals(resources, ARRAY_SIZE(resources));
+}
+#endif
+
+#if defined(CONFIG_IMX_HAB)
+struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
+	.bank = 1,
+	.word = 3,
+};
+#endif
+
+static bool is_mx7d(void)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	int val;
+
+	val = readl(&fuse->tester4);
+	if (val & 1)
+		return false;
+	else
+		return true;
+}
+
+u32 get_cpu_rev(void)
+{
+	struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
+						 ANATOP_BASE_ADDR;
+	u32 reg = readl(&ccm_anatop->digprog);
+	u32 type = (reg >> 16) & 0xff;
+
+	if (!is_mx7d())
+		type = MXC_CPU_MX7S;
+
+	reg &= 0xff;
+	return (type << 12) | reg;
+}
+
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	return get_cpu_rev();
+}
+#endif
+
+static void imx_enet_mdio_fixup(void)
+{
+	struct iomuxc_gpr_base_regs *gpr_regs =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	/*
+	 * The management data input/output (MDIO) requires open-drain,
+	 * i.MX7D TO1.0 ENET MDIO pin has no open drain, but TO1.1 supports
+	 * this feature. So to TO1.1, need to enable open drain by setting
+	 * bits GPR0[8:7].
+	 */
+
+	if (soc_rev() >= CHIP_REV_1_1) {
+		setbits_le32(&gpr_regs->gpr[0],
+			     IOMUXC_GPR_GPR0_ENET_MDIO_OPEN_DRAIN_MASK);
+	}
+}
+
+static void init_cpu_basic(void)
+{
+	imx_enet_mdio_fixup();
+
+#ifdef CONFIG_APBH_DMA
+	/* Start APBH DMA */
+	mxs_dma_init();
+#endif
+}
+
+#ifdef CONFIG_IMX_BOOTAUX
+/*
+ * Table of mappings of physical mem regions in both
+ * Cortex-A7 and Cortex-M4 address spaces.
+ *
+ * For additional details check sections 2.1.2 and 2.1.3 in
+ * i.MX7Dual Applications Processor Reference Manual
+ *
+ */
+const struct rproc_att hostmap[] = {
+	/* aux core , host core,  size */
+	{ 0x00000000, 0x00180000, 0x8000 }, /* OCRAM_S */
+	{ 0x00180000, 0x00180000, 0x8000 }, /* OCRAM_S */
+	{ 0x20180000, 0x00180000, 0x8000 }, /* OCRAM_S */
+	{ 0x1fff8000, 0x007f8000, 0x8000 }, /* TCML */
+	{ 0x20000000, 0x00800000, 0x8000 }, /* TCMU */
+	{ 0x00900000, 0x00900000, 0x20000 }, /* OCRAM_128KB */
+	{ 0x20200000, 0x00900000, 0x20000 }, /* OCRAM_128KB */
+	{ 0x00920000, 0x00920000, 0x20000 }, /* OCRAM_EPDC */
+	{ 0x20220000, 0x00920000, 0x20000 }, /* OCRAM_EPDC */
+	{ 0x00940000, 0x00940000, 0x20000 }, /* OCRAM_PXP */
+	{ 0x20240000, 0x00940000, 0x20000 }, /* OCRAM_PXP */
+	{ 0x10000000, 0x80000000, 0x0fff0000 }, /* DDR Code alias */
+	{ 0x80000000, 0x80000000, 0x60000000 }, /* DDRC */
+	{ /* sentinel */ }
+};
+#endif
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+/* enable all periherial can be accessed in nosec mode */
+static void init_csu(void)
+{
+	int i = 0;
+
+	for (i = 0; i < CSU_NUM_REGS; i++)
+		writel(CSU_INIT_SEC_LEVEL0, CSU_IPS_BASE_ADDR + i * 4);
+}
+
+static void imx_gpcv2_init(void)
+{
+	u32 val, i;
+
+	/*
+	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
+	 * used to deassert dsm_request signal when the signal gets
+	 * asserted unexpectedly.
+	 */
+	val = readl(IOMUXC_GPR_BASE_ADDR + IOMUXC_GPR1);
+	val |= BM_IOMUXC_GPR1_IRQ;
+	writel(val, IOMUXC_GPR_BASE_ADDR + IOMUXC_GPR1);
+
+	/* Initially mask all interrupts */
+	for (i = 0; i < 4; i++) {
+		writel(~0, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4);
+		writel(~0, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE1 + i * 4);
+		writel(~0, GPC_IPS_BASE_ADDR + GPC_IMR1_M4 + i * 4);
+	}
+
+	/* set SCU timing */
+	writel((0x59 << 10) | 0x5B | (0x2 << 20),
+	       GPC_IPS_BASE_ADDR + GPC_PGC_SCU_TIMING);
+
+	/* only external IRQs to wake up LPM and core 0/1 */
+	val = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_BSC);
+	val |= BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP;
+	writel(val, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_BSC);
+
+	/* set C0 power up timming per design requirement */
+	val = readl(GPC_IPS_BASE_ADDR + GPC_PGC_C0_PUPSCR);
+	val &= ~BM_GPC_PGC_CORE_PUPSCR;
+	val |= (0x1A << 7);
+	writel(val, GPC_IPS_BASE_ADDR + GPC_PGC_C0_PUPSCR);
+
+	/* set C1 power up timming per design requirement */
+	val = readl(GPC_IPS_BASE_ADDR + GPC_PGC_C1_PUPSCR);
+	val &= ~BM_GPC_PGC_CORE_PUPSCR;
+	val |= (0x1A << 7);
+	writel(val, GPC_IPS_BASE_ADDR + GPC_PGC_C1_PUPSCR);
+
+	/* dummy ack for time slot by default */
+	writel(BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP_ACK |
+		BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN_ACK,
+		GPC_IPS_BASE_ADDR + GPC_PGC_ACK_SEL_A7);
+
+	/* mask M4 DSM trigger */
+	writel(readl(GPC_IPS_BASE_ADDR + GPC_LPCR_M4) |
+		 BM_LPCR_M4_MASK_DSM_TRIGGER,
+		 GPC_IPS_BASE_ADDR + GPC_LPCR_M4);
+
+	/* set mega/fast mix in A7 domain */
+	writel(0x1, GPC_IPS_BASE_ADDR + GPC_PGC_CPU_MAPPING);
+
+	/* DSM related settings */
+	val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR);
+	val &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN |
+		BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY |
+		BM_SLPCR_REG_BYPASS_COUNT);
+	val |= BM_SLPCR_EN_A7_FASTWUP_WAIT_MODE;
+	writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR);
+
+	/*
+	 * disabling RBC need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+}
+
+int arch_cpu_init(void)
+{
+	init_aips();
+
+	init_csu();
+	/* Disable PDE bit of WMCR register */
+	imx_wdog_disable_powerdown();
+
+	init_cpu_basic();
+
+#if CONFIG_IS_ENABLED(IMX_RDC)
+	isolate_resource();
+#endif
+
+	init_snvs();
+
+	imx_gpcv2_init();
+
+	return 0;
+}
+#else
+int arch_cpu_init(void)
+{
+	init_cpu_basic();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	if (is_mx7d())
+		env_set("soc", "imx7d");
+	else
+		env_set("soc", "imx7s");
+#endif
+
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SERIAL_TAG
+/*
+ * OCOTP_TESTER
+ * i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1, 08/2016
+ * OCOTP_TESTER describes a unique ID based on silicon wafer
+ * and die X/Y position
+ *
+ * OCOTOP_TESTER offset 0x410
+ * 31:0 fuse 0
+ * FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID
+ *
+ * OCOTP_TESTER1 offset 0x420
+ * 31:24 fuse 1
+ * The X-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID
+ * 23:16 fuse 1
+ * The Y-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID
+ * 15:11 fuse 1
+ * The wafer number of the wafer on which the device was fabricated/SJC
+ * CHALLENGE/ Unique ID
+ * 10:0 fuse 1
+ * FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID
+ */
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[0];
+	struct fuse_bank0_regs *fuse =
+		(struct fuse_bank0_regs *)bank->fuse_regs;
+
+	serialnr->low = fuse->tester0;
+	serialnr->high = fuse->tester1;
+}
+#endif
+
+void set_wdog_reset(struct wdog_regs *wdog)
+{
+	u32 reg = readw(&wdog->wcr);
+	/*
+	 * Output WDOG_B signal to reset external pmic or POR_B decided by
+	 * the board desgin. Without external reset, the peripherals/DDR/
+	 * PMIC are not reset, that may cause system working abnormal.
+	 */
+	reg = readw(&wdog->wcr);
+	reg |= 1 << 3;
+	/*
+	 * WDZST bit is write-once only bit. Align this bit in kernel,
+	 * otherwise kernel code will have no chance to set this bit.
+	 */
+	reg |= 1 << 0;
+	writew(reg, &wdog->wcr);
+}
+
+void s_init(void)
+{
+	/* clock configuration. */
+	clock_init();
+
+	return;
+}
+
+#ifndef CONFIG_SPL_BUILD
+const struct boot_mode soc_boot_modes[] = {
+	{"normal",	MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
+	{"primary",	MAKE_CFGVAL_PRIMARY_BOOT},
+	{"secondary",	MAKE_CFGVAL_SECONDARY_BOOT},
+	{NULL,		0},
+};
+
+int boot_mode_getprisec(void)
+{
+	struct src *psrc = (struct src *)SRC_BASE_ADDR;
+
+	return !!(readl(&psrc->gpr10) & IMX7_SRC_GPR10_PERSIST_SECONDARY_BOOT);
+}
+#endif
+
+void reset_misc(void)
+{
+#ifndef CONFIG_SPL_BUILD
+#if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_DM_VIDEO)
+	lcdif_power_down();
+#endif
+#endif
+}
+
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7ulp/Kconfig b/roms/u-boot/arch/arm/mach-imx/mx7ulp/Kconfig
new file mode 100644
index 000000000..2ffac9cf7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7ulp/Kconfig
@@ -0,0 +1,34 @@
+if ARCH_MX7ULP
+
+config SYS_SOC
+	default "mx7ulp"
+
+config LDO_ENABLED_MODE
+	bool "i.MX7ULP LDO Enabled Mode"
+	help
+	  Select this option to enable the PMC1 LDO.
+
+config MX7ULP
+	select HAS_CAAM
+	bool
+
+choice
+	prompt "MX7ULP board select"
+	optional
+
+config TARGET_MX7ULP_COM
+	bool "Support MX7ULP COM board"
+	select MX7ULP
+	select SYS_ARCH_TIMER
+
+config TARGET_MX7ULP_EVK
+	bool "Support mx7ulp EVK board"
+	select MX7ULP
+	select SYS_ARCH_TIMER
+
+endchoice
+
+source "board/ea/mx7ulp_com/Kconfig"
+source "board/freescale/mx7ulp_evk/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7ulp/Makefile b/roms/u-boot/arch/arm/mach-imx/mx7ulp/Makefile
new file mode 100644
index 000000000..adb8d7aec
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7ulp/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+
+obj-y	:= soc.o clock.o iomux.o pcc.o scg.o
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7ulp/clock.c b/roms/u-boot/arch/arm/mach-imx/mx7ulp/clock.c
new file mode 100644
index 000000000..619115391
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7ulp/clock.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <command.h>
+#include <div64.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC_IMX
+#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC0_RBASE
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC1_RBASE
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#endif
+#endif
+	return 0;
+}
+
+static u32 get_fast_plat_clk(void)
+{
+	return scg_clk_get_rate(SCG_NIC0_CLK);
+}
+
+static u32 get_slow_plat_clk(void)
+{
+	return scg_clk_get_rate(SCG_NIC1_CLK);
+}
+
+static u32 get_ipg_clk(void)
+{
+	return scg_clk_get_rate(SCG_NIC1_BUS_CLK);
+}
+
+u32 get_lpuart_clk(void)
+{
+	int index = 0;
+
+	const u32 lpuart_array[] = {
+		LPUART0_RBASE,
+		LPUART1_RBASE,
+		LPUART2_RBASE,
+		LPUART3_RBASE,
+		LPUART4_RBASE,
+		LPUART5_RBASE,
+		LPUART6_RBASE,
+		LPUART7_RBASE,
+	};
+
+	const enum pcc_clk lpuart_pcc_clks[] = {
+		PER_CLK_LPUART4,
+		PER_CLK_LPUART5,
+		PER_CLK_LPUART6,
+		PER_CLK_LPUART7,
+	};
+
+	for (index = 0; index < 8; index++) {
+		if (lpuart_array[index] == LPUART_BASE)
+			break;
+	}
+
+	if (index < 4 || index > 7)
+		return 0;
+
+	return pcc_clock_get_rate(lpuart_pcc_clks[index - 4]);
+}
+
+#ifdef CONFIG_SYS_I2C_IMX_LPI2C
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
+{
+	/* Set parent to FIRC DIV2 clock */
+	const enum pcc_clk lpi2c_pcc_clks[] = {
+		PER_CLK_LPI2C4,
+		PER_CLK_LPI2C5,
+		PER_CLK_LPI2C6,
+		PER_CLK_LPI2C7,
+	};
+
+	if (i2c_num < 4 || i2c_num > 7)
+		return -EINVAL;
+
+	if (enable) {
+		pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4], false);
+		pcc_clock_sel(lpi2c_pcc_clks[i2c_num - 4], SCG_FIRC_DIV2_CLK);
+		pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4], true);
+	} else {
+		pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4], false);
+	}
+	return 0;
+}
+
+u32 imx_get_i2cclk(unsigned i2c_num)
+{
+	const enum pcc_clk lpi2c_pcc_clks[] = {
+		PER_CLK_LPI2C4,
+		PER_CLK_LPI2C5,
+		PER_CLK_LPI2C6,
+		PER_CLK_LPI2C7,
+	};
+
+	if (i2c_num < 4 || i2c_num > 7)
+		return 0;
+
+	return pcc_clock_get_rate(lpi2c_pcc_clks[i2c_num - 4]);
+}
+#endif
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return scg_clk_get_rate(SCG_CORE_CLK);
+	case MXC_AXI_CLK:
+		return get_fast_plat_clk();
+	case MXC_AHB_CLK:
+		return get_slow_plat_clk();
+	case MXC_IPG_CLK:
+		return get_ipg_clk();
+	case MXC_I2C_CLK:
+		return pcc_clock_get_rate(PER_CLK_LPI2C4);
+	case MXC_UART_CLK:
+		return get_lpuart_clk();
+	case MXC_ESDHC_CLK:
+		return pcc_clock_get_rate(PER_CLK_USDHC0);
+	case MXC_ESDHC2_CLK:
+		return pcc_clock_get_rate(PER_CLK_USDHC1);
+	case MXC_DDR_CLK:
+		return scg_clk_get_rate(SCG_DDR_CLK);
+	default:
+		printf("Unsupported mxc_clock %d\n", clk);
+		break;
+	}
+
+	return 0;
+}
+
+void init_clk_usdhc(u32 index)
+{
+	switch (index) {
+	case 0:
+		/*Disable the clock before configure it */
+		pcc_clock_enable(PER_CLK_USDHC0, false);
+
+		/* 158MHz / 1 = 158MHz */
+		pcc_clock_sel(PER_CLK_USDHC0, SCG_NIC1_CLK);
+		pcc_clock_div_config(PER_CLK_USDHC0, false, 1);
+		pcc_clock_enable(PER_CLK_USDHC0, true);
+		break;
+	case 1:
+		/*Disable the clock before configure it */
+		pcc_clock_enable(PER_CLK_USDHC1, false);
+
+		/* 158MHz / 1 = 158MHz */
+		pcc_clock_sel(PER_CLK_USDHC1, SCG_NIC1_CLK);
+		pcc_clock_div_config(PER_CLK_USDHC1, false, 1);
+		pcc_clock_enable(PER_CLK_USDHC1, true);
+		break;
+	default:
+		printf("Invalid index for USDHC %d\n", index);
+		break;
+	}
+}
+
+#ifdef CONFIG_MXC_OCOTP
+
+#define OCOTP_CTRL_PCC1_SLOT		(38)
+#define OCOTP_CTRL_HIGH4K_PCC1_SLOT	(39)
+
+void enable_ocotp_clk(unsigned char enable)
+{
+	u32 val;
+
+	/*
+	 * Seems the OCOTP CLOCKs have been enabled at default,
+	 * check its inuse flag
+	 */
+
+	val = readl(PCC1_RBASE + 4 * OCOTP_CTRL_PCC1_SLOT);
+	if (!(val & PCC_INUSE_MASK))
+		writel(PCC_CGC_MASK, (PCC1_RBASE + 4 * OCOTP_CTRL_PCC1_SLOT));
+
+	val = readl(PCC1_RBASE + 4 * OCOTP_CTRL_HIGH4K_PCC1_SLOT);
+	if (!(val & PCC_INUSE_MASK))
+		writel(PCC_CGC_MASK,
+		       (PCC1_RBASE + 4 * OCOTP_CTRL_HIGH4K_PCC1_SLOT));
+}
+#endif
+
+void enable_usboh3_clk(unsigned char enable)
+{
+	if (enable) {
+		pcc_clock_enable(PER_CLK_USB0, false);
+		pcc_clock_sel(PER_CLK_USB0, SCG_NIC1_BUS_CLK);
+		pcc_clock_enable(PER_CLK_USB0, true);
+
+#ifdef CONFIG_USB_MAX_CONTROLLER_COUNT
+		if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1) {
+			pcc_clock_enable(PER_CLK_USB1, false);
+			pcc_clock_sel(PER_CLK_USB1, SCG_NIC1_BUS_CLK);
+			pcc_clock_enable(PER_CLK_USB1, true);
+		}
+#endif
+
+		pcc_clock_enable(PER_CLK_USB_PHY, true);
+		pcc_clock_enable(PER_CLK_USB_PL301, true);
+	} else {
+		pcc_clock_enable(PER_CLK_USB0, false);
+		pcc_clock_enable(PER_CLK_USB1, false);
+		pcc_clock_enable(PER_CLK_USB_PHY, false);
+		pcc_clock_enable(PER_CLK_USB_PL301, false);
+	}
+}
+
+static void lpuart_set_clk(uint32_t index, enum scg_clk clk)
+{
+	const enum pcc_clk lpuart_pcc_clks[] = {
+		PER_CLK_LPUART4,
+		PER_CLK_LPUART5,
+		PER_CLK_LPUART6,
+		PER_CLK_LPUART7,
+	};
+
+	if (index < 4 || index > 7)
+		return;
+
+#ifndef CONFIG_CLK_DEBUG
+	pcc_clock_enable(lpuart_pcc_clks[index - 4], false);
+#endif
+	pcc_clock_sel(lpuart_pcc_clks[index - 4], clk);
+	pcc_clock_enable(lpuart_pcc_clks[index - 4], true);
+}
+
+static void init_clk_lpuart(void)
+{
+	u32 index = 0, i;
+
+	const u32 lpuart_array[] = {
+		LPUART0_RBASE,
+		LPUART1_RBASE,
+		LPUART2_RBASE,
+		LPUART3_RBASE,
+		LPUART4_RBASE,
+		LPUART5_RBASE,
+		LPUART6_RBASE,
+		LPUART7_RBASE,
+	};
+
+	for (i = 0; i < 8; i++) {
+		if (lpuart_array[i] == LPUART_BASE) {
+			index = i;
+			break;
+		}
+	}
+
+	lpuart_set_clk(index, SCG_SOSC_DIV2_CLK);
+}
+
+static void init_clk_rgpio2p(void)
+{
+	/*Enable RGPIO2P1 clock */
+	pcc_clock_enable(PER_CLK_RGPIO2P1, true);
+
+	/*
+	 * Hard code to enable RGPIO2P0 clock since it is not
+	 * in clock frame for A7 domain
+	 */
+	writel(PCC_CGC_MASK, (PCC0_RBASE + 0x3C));
+}
+
+/* Configure PLL/PFD freq */
+void clock_init(void)
+{
+	/*
+	 * ROM has enabled clocks:
+	 * A4 side: SIRC 16Mhz (DIV1-3 off),  FIRC 48Mhz (DIV1-2 on),
+	 *          Non-LP-boot:  SOSC, SPLL PFD0 (scs selected)
+	 * A7 side:  SPLL PFD0 (scs selected, 413Mhz),
+	 *           APLL PFD0 (352Mhz), DDRCLK, all NIC clocks
+	 *           A7 Plat0 (NIC0) = 176Mhz, Plat1 (NIC1) = 176Mhz,
+	 *           IP BUS (NIC1_BUS) = 58.6Mhz
+	 *
+	 * In u-boot:
+	 * 1. Enable PFD1-3 of APLL for A7 side. Enable FIRC and DIVs.
+	 * 2. Enable USB PLL
+	 * 3. Init the clocks of peripherals used in u-boot bu
+	 *    without set rate interface.The clocks for these
+	 *    peripherals are enabled in this intialization.
+	 * 4.Other peripherals with set clock rate interface
+	 *   does not be set in this function.
+	 */
+
+	scg_a7_firc_init();
+
+	scg_a7_soscdiv_init();
+
+	scg_a7_init_core_clk();
+
+	/* APLL PFD1 = 270Mhz, PFD2=345.6Mhz, PFD3=800Mhz */
+	scg_enable_pll_pfd(SCG_APLL_PFD1_CLK, 35);
+	scg_enable_pll_pfd(SCG_APLL_PFD2_CLK, 28);
+	scg_enable_pll_pfd(SCG_APLL_PFD3_CLK, 12);
+
+	init_clk_lpuart();
+
+	init_clk_rgpio2p();
+
+	enable_usboh3_clk(1);
+}
+
+#ifdef CONFIG_IMX_HAB
+void hab_caam_clock_enable(unsigned char enable)
+{
+       if (enable)
+	       pcc_clock_enable(PER_CLK_CAAM, true);
+       else
+	       pcc_clock_enable(PER_CLK_CAAM, false);
+}
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Dump some core clockes.
+ */
+int do_mx7_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+
+	u32 freq;
+	freq = decode_pll(PLL_A7_SPLL);
+	printf("PLL_A7_SPLL    %8d MHz\n", freq / 1000000);
+
+	freq = decode_pll(PLL_A7_APLL);
+	printf("PLL_A7_APLL    %8d MHz\n", freq / 1000000);
+
+	freq = decode_pll(PLL_USB);
+	printf("PLL_USB        %8d MHz\n", freq / 1000000);
+
+	printf("\n");
+
+	printf("CORE       %8d kHz\n", scg_clk_get_rate(SCG_CORE_CLK) / 1000);
+	printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+	printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
+	printf("AHB        %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+	printf("AXI        %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
+	printf("DDR        %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
+	printf("USDHC1     %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
+	printf("USDHC2     %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
+	printf("I2C4       %8d kHz\n", mxc_get_clock(MXC_I2C_CLK) / 1000);
+
+	scg_a7_info();
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx7_showclocks,
+	"display clocks",
+	""
+);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7ulp/iomux.c b/roms/u-boot/arch/arm/mach-imx/mx7ulp/iomux.c
new file mode 100644
index 000000000..05ddeed2a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7ulp/iomux.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+
+static void *base = (void *)IOMUXC_BASE_ADDR;
+
+/*
+ * iomuxc0 base address. In imx7ulp-pins.h,
+ * the offsets of pins in iomuxc0 are from 0xD000,
+ * so we set the base address to (0x4103D000 - 0xD000 = 0x41030000)
+ */
+static void *base_mports = (void *)(AIPS0_BASE + 0x30000);
+
+/*
+ * configures a single pad in the iomuxer
+ */
+void mx7ulp_iomux_setup_pad(iomux_cfg_t pad)
+{
+	u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
+	u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+	u32 sel_input_ofs =
+		(pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
+	u32 sel_input =
+		(pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
+	u32 pad_ctrl_ofs = mux_ctrl_ofs;
+	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
+
+	debug("[PAD CFG] = 0x%16llX \r\n\tmux_ctl = 0x%X(0x%X) sel_input = 0x%X(0x%X) pad_ctrl = 0x%X(0x%X)\r\n",
+	      pad, mux_ctrl_ofs, mux_mode, sel_input_ofs, sel_input,
+	      pad_ctrl_ofs, pad_ctrl);
+
+	if (mux_mode & IOMUX_CONFIG_MPORTS) {
+		mux_mode &= ~IOMUX_CONFIG_MPORTS;
+		base = base_mports;
+	} else {
+		base = (void *)IOMUXC_BASE_ADDR;
+	}
+
+	__raw_writel(((mux_mode << IOMUXC_PCR_MUX_ALT_SHIFT) &
+		     IOMUXC_PCR_MUX_ALT_MASK), base + mux_ctrl_ofs);
+
+	if (sel_input_ofs)
+		__raw_writel((sel_input << IOMUXC_PSMI_IMUX_ALT_SHIFT),
+			base + sel_input_ofs);
+
+	if (!(pad_ctrl & NO_PAD_CTRL))
+		__raw_writel(((mux_mode << IOMUXC_PCR_MUX_ALT_SHIFT) &
+			     IOMUXC_PCR_MUX_ALT_MASK) |
+			     (pad_ctrl & (~IOMUXC_PCR_MUX_ALT_MASK)),
+			     base + pad_ctrl_ofs);
+}
+
+/* configures a list of pads within declared with IOMUX_PADS macro */
+void mx7ulp_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list,
+				      unsigned count)
+{
+	iomux_cfg_t const *p = pad_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mx7ulp_iomux_setup_pad(*p);
+		p++;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7ulp/pcc.c b/roms/u-boot/arch/arm/mach-imx/mx7ulp/pcc.c
new file mode 100644
index 000000000..aa7ea86a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7ulp/pcc.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <log.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/pcc.h>
+#include <asm/arch/sys_proto.h>
+
+#define PCC_CLKSRC_TYPES 2
+#define PCC_CLKSRC_NUM 7
+
+static enum scg_clk pcc_clksrc[PCC_CLKSRC_TYPES][PCC_CLKSRC_NUM] = {
+	{	SCG_NIC1_BUS_CLK,
+		SCG_NIC1_CLK,
+		SCG_DDR_CLK,
+		SCG_APLL_PFD2_CLK,
+		SCG_APLL_PFD1_CLK,
+		SCG_APLL_PFD0_CLK,
+		USB_PLL_OUT,
+	},
+	{	SCG_SOSC_DIV2_CLK,  /* SOSC BUS clock */
+		MIPI_PLL_OUT,
+		SCG_FIRC_DIV2_CLK,  /* FIRC BUS clock */
+		SCG_ROSC_CLK,
+		SCG_NIC1_BUS_CLK,
+		SCG_NIC1_CLK,
+		SCG_APLL_PFD3_CLK,
+	},
+};
+
+static struct pcc_entry pcc_arrays[] = {
+	{PCC2_RBASE, DMA1_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, RGPIO1_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, FLEXBUS0_PCC2_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, SEMA42_1_PCC2_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, DMA1_CH_MUX0_PCC2_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, SNVS_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, CAAM_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, LPTPM4_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPTPM5_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPIT1_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPSPI2_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPSPI3_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPI2C4_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPI2C5_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPUART4_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPUART5_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, FLEXIO1_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, USBOTG0_PCC2_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC2_RBASE, USBOTG1_PCC2_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC2_RBASE, USBPHY_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, USB_PL301_PCC2_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, USDHC0_PCC2_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC2_RBASE, USDHC1_PCC2_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC2_RBASE, WDG1_PCC2_SLOT,		CLKSRC_PER_BUS,	PCC_HAS_DIV},
+	{PCC2_RBASE, WDG2_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV},
+
+	{PCC3_RBASE, LPTPM6_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPTPM7_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPI2C6_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPI2C7_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPUART6_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPUART7_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, VIU0_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, DSI0_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV},
+	{PCC3_RBASE, LCDIF0_PCC3_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC3_RBASE, MMDC0_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, PORTC_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, PORTD_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, PORTE_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, PORTF_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, GPU3D_PCC3_SLOT,		CLKSRC_PER_PLAT, PCC_NO_DIV},
+	{PCC3_RBASE, GPU2D_PCC3_SLOT,		CLKSRC_PER_PLAT, PCC_NO_DIV},
+};
+
+int pcc_clock_enable(enum pcc_clk clk, bool enable)
+{
+	u32 reg, val;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays))
+		return -EINVAL;
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+
+	val = readl(reg);
+
+	clk_debug("pcc_clock_enable: clk %d, reg 0x%x, val 0x%x, enable %d\n",
+		  clk, reg, val, enable);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK))
+		return -EPERM;
+
+	if (enable)
+		val |= PCC_CGC_MASK;
+	else
+		val &= ~PCC_CGC_MASK;
+
+	writel(val, reg);
+
+	clk_debug("pcc_clock_enable: val 0x%x\n", val);
+
+	return 0;
+}
+
+/* The clock source select needs clock is disabled */
+int pcc_clock_sel(enum pcc_clk clk, enum scg_clk src)
+{
+	u32 reg, val, i, clksrc_type;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays))
+		return -EINVAL;
+
+	clksrc_type = pcc_arrays[clk].clksrc;
+	if (clksrc_type >= CLKSRC_NO_PCS) {
+		printf("No PCS field for the PCC %d, clksrc type %d\n",
+		       clk, clksrc_type);
+		return -EPERM;
+	}
+
+	for (i = 0; i < PCC_CLKSRC_NUM; i++) {
+		if (pcc_clksrc[clksrc_type][i] == src) {
+			/* Find the clock src, then set it to PCS */
+			break;
+		}
+	}
+
+	if (i == PCC_CLKSRC_NUM) {
+		printf("Not find the parent scg_clk in PCS of PCC %d, invalid scg_clk %d\n", clk, src);
+		return -EINVAL;
+	}
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+
+	val = readl(reg);
+
+	clk_debug("pcc_clock_sel: clk %d, reg 0x%x, val 0x%x, clksrc_type %d\n",
+		  clk, reg, val, clksrc_type);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK) ||
+	    (val & PCC_CGC_MASK)) {
+		printf("Not permit to select clock source val = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	val &= ~PCC_PCS_MASK;
+	val |= ((i + 1) << PCC_PCS_OFFSET);
+
+	writel(val, reg);
+
+	clk_debug("pcc_clock_sel: val 0x%x\n", val);
+
+	return 0;
+}
+
+int pcc_clock_div_config(enum pcc_clk clk, bool frac, u8 div)
+{
+	u32 reg, val;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays) || div > 8 ||
+	    (div == 1 && frac != 0))
+		return -EINVAL;
+
+	if (pcc_arrays[clk].div >= PCC_NO_DIV) {
+		printf("No DIV/FRAC field for the PCC %d\n", clk);
+		return -EPERM;
+	}
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+
+	val = readl(reg);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK) ||
+	    (val & PCC_CGC_MASK)) {
+		printf("Not permit to set div/frac val = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	if (frac)
+		val |= PCC_FRAC_MASK;
+	else
+		val &= ~PCC_FRAC_MASK;
+
+	val &= ~PCC_PCD_MASK;
+	val |= (div - 1) & PCC_PCD_MASK;
+
+	writel(val, reg);
+
+	return 0;
+}
+
+bool pcc_clock_is_enable(enum pcc_clk clk)
+{
+	u32 reg, val;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays))
+		return -EINVAL;
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+	val = readl(reg);
+
+	if ((val & PCC_INUSE_MASK) || (val & PCC_CGC_MASK))
+		return true;
+
+	return false;
+}
+
+int pcc_clock_get_clksrc(enum pcc_clk clk, enum scg_clk *src)
+{
+	u32 reg, val, clksrc_type;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays))
+		return -EINVAL;
+
+	clksrc_type = pcc_arrays[clk].clksrc;
+	if (clksrc_type >= CLKSRC_NO_PCS) {
+		printf("No PCS field for the PCC %d, clksrc type %d\n",
+		       clk, clksrc_type);
+		return -EPERM;
+	}
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+
+	val = readl(reg);
+
+	clk_debug("pcc_clock_get_clksrc: clk %d, reg 0x%x, val 0x%x, type %d\n",
+		  clk, reg, val, clksrc_type);
+
+	if (!(val & PCC_PR_MASK)) {
+		printf("This pcc slot is not present = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	val &= PCC_PCS_MASK;
+	val = (val >> PCC_PCS_OFFSET);
+
+	if (!val) {
+		printf("Clock source is off\n");
+		return -EIO;
+	}
+
+	*src = pcc_clksrc[clksrc_type][val - 1];
+
+	clk_debug("pcc_clock_get_clksrc: parent scg clk %d\n", *src);
+
+	return 0;
+}
+
+u32 pcc_clock_get_rate(enum pcc_clk clk)
+{
+	u32 reg, val, rate, frac, div;
+	enum scg_clk parent;
+	int ret;
+
+	ret = pcc_clock_get_clksrc(clk, &parent);
+	if (ret)
+		return 0;
+
+	rate = scg_clk_get_rate(parent);
+
+	clk_debug("pcc_clock_get_rate: parent rate %u\n", rate);
+
+	if (pcc_arrays[clk].div == PCC_HAS_DIV) {
+		reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+		val = readl(reg);
+
+		frac = (val & PCC_FRAC_MASK) >> PCC_FRAC_OFFSET;
+		div = (val & PCC_PCD_MASK) >> PCC_PCD_OFFSET;
+
+		/*
+		 * Theoretically don't have overflow in the calc,
+		 * the rate won't exceed 2G
+		 */
+		rate = rate * (frac + 1) / (div + 1);
+	}
+
+	clk_debug("pcc_clock_get_rate: rate %u\n", rate);
+	return rate;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7ulp/scg.c b/roms/u-boot/arch/arm/mach-imx/mx7ulp/scg.c
new file mode 100644
index 000000000..4c066557c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7ulp/scg.c
@@ -0,0 +1,1083 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <log.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/pcc.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/delay.h>
+
+scg_p scg1_regs = (scg_p)SCG1_RBASE;
+
+static u32 scg_src_get_rate(enum scg_clk clksrc)
+{
+	u32 reg;
+
+	switch (clksrc) {
+	case SCG_SOSC_CLK:
+		reg = readl(&scg1_regs->sosccsr);
+		if (!(reg & SCG_SOSC_CSR_SOSCVLD_MASK))
+			return 0;
+
+		return 24000000;
+	case SCG_FIRC_CLK:
+		reg = readl(&scg1_regs->firccsr);
+		if (!(reg & SCG_FIRC_CSR_FIRCVLD_MASK))
+			return 0;
+
+		return 48000000;
+	case SCG_SIRC_CLK:
+		reg = readl(&scg1_regs->sirccsr);
+		if (!(reg & SCG_SIRC_CSR_SIRCVLD_MASK))
+			return 0;
+
+		return 16000000;
+	case SCG_ROSC_CLK:
+		reg = readl(&scg1_regs->rtccsr);
+		if (!(reg & SCG_ROSC_CSR_ROSCVLD_MASK))
+			return 0;
+
+		return 32768;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static u32 scg_sircdiv_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask;
+
+	switch (clk) {
+	case SCG_SIRC_DIV1_CLK:
+		mask = SCG_SIRCDIV_DIV1_MASK;
+		shift = SCG_SIRCDIV_DIV1_SHIFT;
+		break;
+	case SCG_SIRC_DIV2_CLK:
+		mask = SCG_SIRCDIV_DIV2_MASK;
+		shift = SCG_SIRCDIV_DIV2_SHIFT;
+		break;
+	case SCG_SIRC_DIV3_CLK:
+		mask = SCG_SIRCDIV_DIV3_MASK;
+		shift = SCG_SIRCDIV_DIV3_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->sirccsr);
+	if (!(reg & SCG_SIRC_CSR_SIRCVLD_MASK))
+		return 0;
+
+	reg = readl(&scg1_regs->sircdiv);
+	val = (reg & mask) >> shift;
+
+	if (!val) /*clock disabled*/
+		return 0;
+
+	rate = scg_src_get_rate(SCG_SIRC_CLK);
+	rate = rate / (1 << (val - 1));
+
+	return rate;
+}
+
+static u32 scg_fircdiv_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask;
+
+	switch (clk) {
+	case SCG_FIRC_DIV1_CLK:
+		mask = SCG_FIRCDIV_DIV1_MASK;
+		shift = SCG_FIRCDIV_DIV1_SHIFT;
+		break;
+	case SCG_FIRC_DIV2_CLK:
+		mask = SCG_FIRCDIV_DIV2_MASK;
+		shift = SCG_FIRCDIV_DIV2_SHIFT;
+		break;
+	case SCG_FIRC_DIV3_CLK:
+		mask = SCG_FIRCDIV_DIV3_MASK;
+		shift = SCG_FIRCDIV_DIV3_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->firccsr);
+	if (!(reg & SCG_FIRC_CSR_FIRCVLD_MASK))
+		return 0;
+
+	reg = readl(&scg1_regs->fircdiv);
+	val = (reg & mask) >> shift;
+
+	if (!val) /*clock disabled*/
+		return 0;
+
+	rate = scg_src_get_rate(SCG_FIRC_CLK);
+	rate = rate / (1 << (val - 1));
+
+	return rate;
+}
+
+static u32 scg_soscdiv_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask;
+
+	switch (clk) {
+	case SCG_SOSC_DIV1_CLK:
+		mask = SCG_SOSCDIV_DIV1_MASK;
+		shift = SCG_SOSCDIV_DIV1_SHIFT;
+		break;
+	case SCG_SOSC_DIV2_CLK:
+		mask = SCG_SOSCDIV_DIV2_MASK;
+		shift = SCG_SOSCDIV_DIV2_SHIFT;
+		break;
+	case SCG_SOSC_DIV3_CLK:
+		mask = SCG_SOSCDIV_DIV3_MASK;
+		shift = SCG_SOSCDIV_DIV3_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->sosccsr);
+	if (!(reg & SCG_SOSC_CSR_SOSCVLD_MASK))
+		return 0;
+
+	reg = readl(&scg1_regs->soscdiv);
+	val = (reg & mask) >> shift;
+
+	if (!val) /*clock disabled*/
+		return 0;
+
+	rate = scg_src_get_rate(SCG_SOSC_CLK);
+	rate = rate / (1 << (val - 1));
+
+	return rate;
+}
+
+static u32 scg_apll_pfd_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask, gate, valid;
+
+	switch (clk) {
+	case SCG_APLL_PFD0_CLK:
+		gate = SCG_PLL_PFD0_GATE_MASK;
+		valid = SCG_PLL_PFD0_VALID_MASK;
+		mask = SCG_PLL_PFD0_FRAC_MASK;
+		shift = SCG_PLL_PFD0_FRAC_SHIFT;
+		break;
+	case SCG_APLL_PFD1_CLK:
+		gate = SCG_PLL_PFD1_GATE_MASK;
+		valid = SCG_PLL_PFD1_VALID_MASK;
+		mask = SCG_PLL_PFD1_FRAC_MASK;
+		shift = SCG_PLL_PFD1_FRAC_SHIFT;
+		break;
+	case SCG_APLL_PFD2_CLK:
+		gate = SCG_PLL_PFD2_GATE_MASK;
+		valid = SCG_PLL_PFD2_VALID_MASK;
+		mask = SCG_PLL_PFD2_FRAC_MASK;
+		shift = SCG_PLL_PFD2_FRAC_SHIFT;
+		break;
+	case SCG_APLL_PFD3_CLK:
+		gate = SCG_PLL_PFD3_GATE_MASK;
+		valid = SCG_PLL_PFD3_VALID_MASK;
+		mask = SCG_PLL_PFD3_FRAC_MASK;
+		shift = SCG_PLL_PFD3_FRAC_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->apllpfd);
+	if (reg & gate || !(reg & valid))
+		return 0;
+
+	clk_debug("scg_apll_pfd_get_rate reg 0x%x\n", reg);
+
+	val = (reg & mask) >> shift;
+	rate = decode_pll(PLL_A7_APLL);
+
+	rate = rate / val * 18;
+
+	clk_debug("scg_apll_pfd_get_rate rate %u\n", rate);
+
+	return rate;
+}
+
+static u32 scg_spll_pfd_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask, gate, valid;
+
+	switch (clk) {
+	case SCG_SPLL_PFD0_CLK:
+		gate = SCG_PLL_PFD0_GATE_MASK;
+		valid = SCG_PLL_PFD0_VALID_MASK;
+		mask = SCG_PLL_PFD0_FRAC_MASK;
+		shift = SCG_PLL_PFD0_FRAC_SHIFT;
+		break;
+	case SCG_SPLL_PFD1_CLK:
+		gate = SCG_PLL_PFD1_GATE_MASK;
+		valid = SCG_PLL_PFD1_VALID_MASK;
+		mask = SCG_PLL_PFD1_FRAC_MASK;
+		shift = SCG_PLL_PFD1_FRAC_SHIFT;
+		break;
+	case SCG_SPLL_PFD2_CLK:
+		gate = SCG_PLL_PFD2_GATE_MASK;
+		valid = SCG_PLL_PFD2_VALID_MASK;
+		mask = SCG_PLL_PFD2_FRAC_MASK;
+		shift = SCG_PLL_PFD2_FRAC_SHIFT;
+		break;
+	case SCG_SPLL_PFD3_CLK:
+		gate = SCG_PLL_PFD3_GATE_MASK;
+		valid = SCG_PLL_PFD3_VALID_MASK;
+		mask = SCG_PLL_PFD3_FRAC_MASK;
+		shift = SCG_PLL_PFD3_FRAC_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->spllpfd);
+	if (reg & gate || !(reg & valid))
+		return 0;
+
+	clk_debug("scg_spll_pfd_get_rate reg 0x%x\n", reg);
+
+	val = (reg & mask) >> shift;
+	rate = decode_pll(PLL_A7_SPLL);
+
+	rate = rate / val * 18;
+
+	clk_debug("scg_spll_pfd_get_rate rate %u\n", rate);
+
+	return rate;
+}
+
+static u32 scg_apll_get_rate(void)
+{
+	u32 reg, val, rate;
+
+	reg = readl(&scg1_regs->apllcfg);
+	val = (reg & SCG_PLL_CFG_PLLSEL_MASK) >> SCG_PLL_CFG_PLLSEL_SHIFT;
+
+	if (!val) {
+		/* APLL clock after two dividers */
+		rate = decode_pll(PLL_A7_APLL);
+
+		val = (reg & SCG_PLL_CFG_POSTDIV1_MASK) >>
+			SCG_PLL_CFG_POSTDIV1_SHIFT;
+		rate = rate / (val + 1);
+
+		val = (reg & SCG_PLL_CFG_POSTDIV2_MASK) >>
+			SCG_PLL_CFG_POSTDIV2_SHIFT;
+		rate = rate / (val + 1);
+	} else {
+		/* APLL PFD clock */
+		val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >>
+			SCG_PLL_CFG_PFDSEL_SHIFT;
+		rate = scg_apll_pfd_get_rate(SCG_APLL_PFD0_CLK + val);
+	}
+
+	return rate;
+}
+
+static u32 scg_spll_get_rate(void)
+{
+	u32 reg, val, rate;
+
+	reg = readl(&scg1_regs->spllcfg);
+	val = (reg & SCG_PLL_CFG_PLLSEL_MASK) >> SCG_PLL_CFG_PLLSEL_SHIFT;
+
+	clk_debug("scg_spll_get_rate reg 0x%x\n", reg);
+
+	if (!val) {
+		/* APLL clock after two dividers */
+		rate = decode_pll(PLL_A7_SPLL);
+
+		val = (reg & SCG_PLL_CFG_POSTDIV1_MASK) >>
+			SCG_PLL_CFG_POSTDIV1_SHIFT;
+		rate = rate / (val + 1);
+
+		val = (reg & SCG_PLL_CFG_POSTDIV2_MASK) >>
+			SCG_PLL_CFG_POSTDIV2_SHIFT;
+		rate = rate / (val + 1);
+
+		clk_debug("scg_spll_get_rate SPLL %u\n", rate);
+
+	} else {
+		/* APLL PFD clock */
+		val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >>
+			SCG_PLL_CFG_PFDSEL_SHIFT;
+		rate = scg_spll_pfd_get_rate(SCG_SPLL_PFD0_CLK + val);
+
+		clk_debug("scg_spll_get_rate PFD %u\n", rate);
+	}
+
+	return rate;
+}
+
+static u32 scg_ddr_get_rate(void)
+{
+	u32 reg, val, rate, div;
+
+	reg = readl(&scg1_regs->ddrccr);
+	val = (reg & SCG_DDRCCR_DDRCS_MASK) >> SCG_DDRCCR_DDRCS_SHIFT;
+	div = (reg & SCG_DDRCCR_DDRDIV_MASK) >> SCG_DDRCCR_DDRDIV_SHIFT;
+
+	if (!div)
+		return 0;
+
+	if (!val) {
+		reg = readl(&scg1_regs->apllcfg);
+		val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >>
+			SCG_PLL_CFG_PFDSEL_SHIFT;
+		rate = scg_apll_pfd_get_rate(SCG_APLL_PFD0_CLK + val);
+	} else {
+		rate = decode_pll(PLL_USB);
+	}
+
+	rate = rate / (1 << (div - 1));
+	return rate;
+}
+
+static u32 scg_nic_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate, nic0_rate;
+	u32 shift, mask;
+
+	reg = readl(&scg1_regs->niccsr);
+	val = (reg & SCG_NICCSR_NICCS_MASK) >> SCG_NICCSR_NICCS_SHIFT;
+
+	clk_debug("scg_nic_get_rate niccsr 0x%x\n", reg);
+
+	if (!val)
+		rate = scg_src_get_rate(SCG_FIRC_CLK);
+	else
+		rate = scg_ddr_get_rate();
+
+	clk_debug("scg_nic_get_rate parent rate %u\n", rate);
+
+	val = (reg & SCG_NICCSR_NIC0DIV_MASK) >> SCG_NICCSR_NIC0DIV_SHIFT;
+
+	rate = rate / (val + 1);
+	nic0_rate = rate;
+
+	clk_debug("scg_nic_get_rate NIC0 rate %u\n", rate);
+
+	switch (clk) {
+	case SCG_NIC0_CLK:
+		return rate;
+	case SCG_GPU_CLK:
+		mask = SCG_NICCSR_GPUDIV_MASK;
+		shift = SCG_NICCSR_GPUDIV_SHIFT;
+		break;
+	case SCG_NIC1_EXT_CLK:
+	case SCG_NIC1_BUS_CLK:
+	case SCG_NIC1_CLK:
+		mask = SCG_NICCSR_NIC1DIV_MASK;
+		shift = SCG_NICCSR_NIC1DIV_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	val = (reg & mask) >> shift;
+	rate = rate / (val + 1);
+
+	clk_debug("scg_nic_get_rate NIC1 rate %u\n", rate);
+
+	switch (clk) {
+	case SCG_GPU_CLK:
+	case SCG_NIC1_CLK:
+		return rate;
+	case SCG_NIC1_EXT_CLK:
+		mask = SCG_NICCSR_NIC1EXTDIV_MASK;
+		shift = SCG_NICCSR_NIC1EXTDIV_SHIFT;
+		break;
+	case SCG_NIC1_BUS_CLK:
+		mask = SCG_NICCSR_NIC1BUSDIV_MASK;
+		shift = SCG_NICCSR_NIC1BUSDIV_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	/*
+	 * On RevB, the nic_bus and nic_ext dividers are parallel
+	 * not chained with nic div
+	 */
+	if (soc_rev() >= CHIP_REV_2_0)
+		rate = nic0_rate;
+
+	val = (reg & mask) >> shift;
+	rate = rate / (val + 1);
+
+	clk_debug("scg_nic_get_rate NIC1 bus rate %u\n", rate);
+	return rate;
+}
+
+
+static enum scg_clk scg_scs_array[4] = {
+	SCG_SOSC_CLK, SCG_SIRC_CLK, SCG_FIRC_CLK, SCG_ROSC_CLK,
+};
+
+static u32 scg_sys_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+
+	if (clk != SCG_CORE_CLK && clk != SCG_BUS_CLK)
+		return 0;
+
+	reg = readl(&scg1_regs->csr);
+	val = (reg & SCG_CCR_SCS_MASK) >> SCG_CCR_SCS_SHIFT;
+
+	clk_debug("scg_sys_get_rate reg 0x%x\n", reg);
+
+	switch (val) {
+	case SCG_SCS_SYS_OSC:
+	case SCG_SCS_SLOW_IRC:
+	case SCG_SCS_FAST_IRC:
+	case SCG_SCS_RTC_OSC:
+		rate = scg_src_get_rate(scg_scs_array[val - 1]);
+		break;
+	case 5:
+		rate = scg_apll_get_rate();
+		break;
+	case 6:
+		rate = scg_spll_get_rate();
+		break;
+	default:
+		return 0;
+	}
+
+	clk_debug("scg_sys_get_rate parent rate %u\n", rate);
+
+	val = (reg & SCG_CCR_DIVCORE_MASK) >> SCG_CCR_DIVCORE_SHIFT;
+
+	rate = rate / (val + 1);
+
+	if (clk == SCG_BUS_CLK) {
+		val = (reg & SCG_CCR_DIVBUS_MASK) >> SCG_CCR_DIVBUS_SHIFT;
+		rate = rate / (val + 1);
+	}
+
+	return rate;
+}
+
+u32 decode_pll(enum pll_clocks pll)
+{
+	u32 reg,  pre_div, infreq, mult;
+	u32 num, denom;
+
+	/*
+	 * Alought there are four choices for the bypass src,
+	 * we choose OSC_24M which is the default set in ROM.
+	 */
+	switch (pll) {
+	case PLL_A7_SPLL:
+		reg = readl(&scg1_regs->spllcsr);
+
+		if (!(reg & SCG_SPLL_CSR_SPLLVLD_MASK))
+			return 0;
+
+		reg = readl(&scg1_regs->spllcfg);
+
+		pre_div = (reg & SCG_PLL_CFG_PREDIV_MASK) >>
+			   SCG_PLL_CFG_PREDIV_SHIFT;
+		pre_div += 1;
+
+		mult = (reg & SCG1_SPLL_CFG_MULT_MASK) >>
+			   SCG_PLL_CFG_MULT_SHIFT;
+
+		infreq = (reg & SCG_PLL_CFG_CLKSRC_MASK) >>
+			   SCG_PLL_CFG_CLKSRC_SHIFT;
+		if (!infreq)
+			infreq = scg_src_get_rate(SCG_SOSC_CLK);
+		else
+			infreq = scg_src_get_rate(SCG_FIRC_CLK);
+
+		num = readl(&scg1_regs->spllnum);
+		denom = readl(&scg1_regs->splldenom);
+
+		infreq = infreq / pre_div;
+
+		if (denom)
+			return infreq * mult + infreq * num / denom;
+		else
+			return infreq * mult;
+
+	case PLL_A7_APLL:
+		reg = readl(&scg1_regs->apllcsr);
+
+		if (!(reg & SCG_APLL_CSR_APLLVLD_MASK))
+			return 0;
+
+		reg = readl(&scg1_regs->apllcfg);
+
+		pre_div = (reg & SCG_PLL_CFG_PREDIV_MASK) >>
+			   SCG_PLL_CFG_PREDIV_SHIFT;
+		pre_div += 1;
+
+		mult = (reg & SCG_APLL_CFG_MULT_MASK) >>
+			   SCG_PLL_CFG_MULT_SHIFT;
+
+		infreq = (reg & SCG_PLL_CFG_CLKSRC_MASK) >>
+			   SCG_PLL_CFG_CLKSRC_SHIFT;
+		if (!infreq)
+			infreq = scg_src_get_rate(SCG_SOSC_CLK);
+		else
+			infreq = scg_src_get_rate(SCG_FIRC_CLK);
+
+		num = readl(&scg1_regs->apllnum);
+		denom = readl(&scg1_regs->aplldenom);
+
+		infreq = infreq / pre_div;
+
+		if (denom)
+			return infreq * mult + infreq * num / denom;
+		else
+			return infreq * mult;
+
+	case PLL_USB:
+		reg = readl(&scg1_regs->upllcsr);
+
+		if (!(reg & SCG_UPLL_CSR_UPLLVLD_MASK))
+			return 0;
+
+		return 480000000u;
+
+	case PLL_MIPI:
+		return 480000000u;
+	default:
+		printf("Unsupported pll clocks %d\n", pll);
+		break;
+	}
+
+	return 0;
+}
+
+u32 scg_clk_get_rate(enum scg_clk clk)
+{
+	switch (clk) {
+	case SCG_SIRC_DIV1_CLK:
+	case SCG_SIRC_DIV2_CLK:
+	case SCG_SIRC_DIV3_CLK:
+		return scg_sircdiv_get_rate(clk);
+
+	case SCG_FIRC_DIV1_CLK:
+	case SCG_FIRC_DIV2_CLK:
+	case SCG_FIRC_DIV3_CLK:
+		return scg_fircdiv_get_rate(clk);
+
+	case SCG_SOSC_DIV1_CLK:
+	case SCG_SOSC_DIV2_CLK:
+	case SCG_SOSC_DIV3_CLK:
+		return scg_soscdiv_get_rate(clk);
+
+	case SCG_CORE_CLK:
+	case SCG_BUS_CLK:
+		return scg_sys_get_rate(clk);
+
+	case SCG_SPLL_PFD0_CLK:
+	case SCG_SPLL_PFD1_CLK:
+	case SCG_SPLL_PFD2_CLK:
+	case SCG_SPLL_PFD3_CLK:
+		return scg_spll_pfd_get_rate(clk);
+
+	case SCG_APLL_PFD0_CLK:
+	case SCG_APLL_PFD1_CLK:
+	case SCG_APLL_PFD2_CLK:
+	case SCG_APLL_PFD3_CLK:
+		return scg_apll_pfd_get_rate(clk);
+
+	case SCG_DDR_CLK:
+		return scg_ddr_get_rate();
+
+	case SCG_NIC0_CLK:
+	case SCG_GPU_CLK:
+	case SCG_NIC1_CLK:
+	case SCG_NIC1_BUS_CLK:
+	case SCG_NIC1_EXT_CLK:
+		return scg_nic_get_rate(clk);
+
+	case USB_PLL_OUT:
+		return decode_pll(PLL_USB);
+
+	case MIPI_PLL_OUT:
+		return decode_pll(PLL_MIPI);
+
+	case SCG_SOSC_CLK:
+	case SCG_FIRC_CLK:
+	case SCG_SIRC_CLK:
+	case SCG_ROSC_CLK:
+		return scg_src_get_rate(clk);
+	default:
+		return 0;
+	}
+}
+
+int scg_enable_pll_pfd(enum scg_clk clk, u32 frac)
+{
+	u32 reg;
+	u32 shift, mask, gate, valid;
+	u32 addr;
+
+	if (frac < 12 || frac > 35)
+		return -EINVAL;
+
+	switch (clk) {
+	case SCG_SPLL_PFD0_CLK:
+	case SCG_APLL_PFD0_CLK:
+		gate = SCG_PLL_PFD0_GATE_MASK;
+		valid = SCG_PLL_PFD0_VALID_MASK;
+		mask = SCG_PLL_PFD0_FRAC_MASK;
+		shift = SCG_PLL_PFD0_FRAC_SHIFT;
+
+		if (clk == SCG_SPLL_PFD0_CLK)
+			addr = (u32)(&scg1_regs->spllpfd);
+		else
+			addr = (u32)(&scg1_regs->apllpfd);
+		break;
+	case SCG_SPLL_PFD1_CLK:
+	case SCG_APLL_PFD1_CLK:
+		gate = SCG_PLL_PFD1_GATE_MASK;
+		valid = SCG_PLL_PFD1_VALID_MASK;
+		mask = SCG_PLL_PFD1_FRAC_MASK;
+		shift = SCG_PLL_PFD1_FRAC_SHIFT;
+
+		if (clk == SCG_SPLL_PFD1_CLK)
+			addr = (u32)(&scg1_regs->spllpfd);
+		else
+			addr = (u32)(&scg1_regs->apllpfd);
+		break;
+	case SCG_SPLL_PFD2_CLK:
+	case SCG_APLL_PFD2_CLK:
+		gate = SCG_PLL_PFD2_GATE_MASK;
+		valid = SCG_PLL_PFD2_VALID_MASK;
+		mask = SCG_PLL_PFD2_FRAC_MASK;
+		shift = SCG_PLL_PFD2_FRAC_SHIFT;
+
+		if (clk == SCG_SPLL_PFD2_CLK)
+			addr = (u32)(&scg1_regs->spllpfd);
+		else
+			addr = (u32)(&scg1_regs->apllpfd);
+		break;
+	case SCG_SPLL_PFD3_CLK:
+	case SCG_APLL_PFD3_CLK:
+		gate = SCG_PLL_PFD3_GATE_MASK;
+		valid = SCG_PLL_PFD3_VALID_MASK;
+		mask = SCG_PLL_PFD3_FRAC_MASK;
+		shift = SCG_PLL_PFD3_FRAC_SHIFT;
+
+		if (clk == SCG_SPLL_PFD3_CLK)
+			addr = (u32)(&scg1_regs->spllpfd);
+		else
+			addr = (u32)(&scg1_regs->apllpfd);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Gate the PFD */
+	reg = readl(addr);
+	reg |= gate;
+	writel(reg, addr);
+
+	/* Write Frac divider */
+	reg &= ~mask;
+	reg |= (frac << shift) & mask;
+	writel(reg, addr);
+
+	/*
+	 * Un-gate the PFD
+	 * (Need un-gate before checking valid, not align with RM)
+	 */
+	reg &= ~gate;
+	writel(reg, addr);
+
+	/* Wait for PFD clock being valid */
+	do {
+		reg = readl(addr);
+	} while (!(reg & valid));
+
+	return 0;
+}
+
+#define SIM_MISC_CTRL0_USB_PLL_EN_MASK (0x1 << 2)
+int scg_enable_usb_pll(bool usb_control)
+{
+	u32 sosc_rate;
+	s32 timeout = 1000000;
+	u32 reg;
+
+	struct usbphy_regs *usbphy =
+		(struct usbphy_regs *)USBPHY_RBASE;
+
+	sosc_rate = scg_src_get_rate(SCG_SOSC_CLK);
+	if (!sosc_rate)
+		return -EPERM;
+
+	reg = readl(SIM0_RBASE + 0x3C);
+	if (usb_control)
+		reg &= ~SIM_MISC_CTRL0_USB_PLL_EN_MASK;
+	else
+		reg |= SIM_MISC_CTRL0_USB_PLL_EN_MASK;
+	writel(reg, SIM0_RBASE + 0x3C);
+
+	if (!(readl(&usbphy->usb1_pll_480_ctrl) & PLL_USB_LOCK_MASK)) {
+		writel(0x1c00000, &usbphy->usb1_pll_480_ctrl_clr);
+
+		switch (sosc_rate) {
+		case 24000000:
+			writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		case 30000000:
+			writel(0x800000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		case 19200000:
+			writel(0x1400000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		default:
+			writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+		}
+
+		/* Enable the regulator first */
+		writel(PLL_USB_REG_ENABLE_MASK,
+		       &usbphy->usb1_pll_480_ctrl_set);
+
+		/* Wait at least 15us */
+		udelay(15);
+
+		/* Enable the power */
+		writel(PLL_USB_PWR_MASK, &usbphy->usb1_pll_480_ctrl_set);
+
+		/* Wait lock */
+		while (timeout--) {
+			if (readl(&usbphy->usb1_pll_480_ctrl) &
+			    PLL_USB_LOCK_MASK)
+				break;
+		}
+
+		if (timeout <= 0) {
+			/* If timeout, we power down the pll */
+			writel(PLL_USB_PWR_MASK,
+			       &usbphy->usb1_pll_480_ctrl_clr);
+			return -ETIME;
+		}
+	}
+
+	/* Clear the bypass */
+	writel(PLL_USB_BYPASS_MASK, &usbphy->usb1_pll_480_ctrl_clr);
+
+	/* Enable the PLL clock out to USB */
+	writel((PLL_USB_EN_USB_CLKS_MASK | PLL_USB_ENABLE_MASK),
+	       &usbphy->usb1_pll_480_ctrl_set);
+
+	if (!usb_control) {
+		while (timeout--) {
+			if (readl(&scg1_regs->upllcsr) &
+			    SCG_UPLL_CSR_UPLLVLD_MASK)
+				break;
+		}
+
+		if (timeout <= 0) {
+			reg = readl(SIM0_RBASE + 0x3C);
+			reg &= ~SIM_MISC_CTRL0_USB_PLL_EN_MASK;
+			writel(reg, SIM0_RBASE + 0x3C);
+			return -ETIME;
+		}
+	}
+
+	return 0;
+}
+
+
+/* A7 domain system clock source is SPLL */
+#define SCG1_RCCR_SCS_NUM	((SCG_SCS_SYS_PLL) << SCG_CCR_SCS_SHIFT)
+
+/* A7 Core clck = SPLL PFD0 / 1 = 500MHz / 1 = 500MHz */
+#define SCG1_RCCR_DIVCORE_NUM	((0x0)  << SCG_CCR_DIVCORE_SHIFT)
+#define SCG1_RCCR_CFG_MASK	(SCG_CCR_SCS_MASK | SCG_CCR_DIVBUS_MASK)
+
+/* A7 Plat clck = A7 Core Clock / 2 = 250MHz / 1 = 250MHz */
+#define SCG1_RCCR_DIVBUS_NUM	((0x1)  << SCG_CCR_DIVBUS_SHIFT)
+#define SCG1_RCCR_CFG_NUM	(SCG1_RCCR_SCS_NUM | SCG1_RCCR_DIVBUS_NUM)
+
+void scg_a7_rccr_init(void)
+{
+	u32 rccr_reg_val = 0;
+
+	rccr_reg_val = readl(&scg1_regs->rccr);
+
+	rccr_reg_val &= (~SCG1_RCCR_CFG_MASK);
+	rccr_reg_val |= (SCG1_RCCR_CFG_NUM);
+
+	writel(rccr_reg_val, &scg1_regs->rccr);
+}
+
+/* POSTDIV2 = 1 */
+#define SCG1_SPLL_CFG_POSTDIV2_NUM	((0x0)  << SCG_PLL_CFG_POSTDIV2_SHIFT)
+/* POSTDIV1 = 1 */
+#define SCG1_SPLL_CFG_POSTDIV1_NUM	((0x0)  << SCG_PLL_CFG_POSTDIV1_SHIFT)
+
+/* MULT = 22 */
+#define SCG1_SPLL_CFG_MULT_NUM		((22)   << SCG_PLL_CFG_MULT_SHIFT)
+
+/* PFD0 output clock selected */
+#define SCG1_SPLL_CFG_PFDSEL_NUM	((0) << SCG_PLL_CFG_PFDSEL_SHIFT)
+/* PREDIV = 1 */
+#define SCG1_SPLL_CFG_PREDIV_NUM	((0x0)  << SCG_PLL_CFG_PREDIV_SHIFT)
+/* SPLL output clocks (including PFD outputs) selected */
+#define SCG1_SPLL_CFG_BYPASS_NUM	((0x0)  << SCG_PLL_CFG_BYPASS_SHIFT)
+/* SPLL PFD output clock selected */
+#define SCG1_SPLL_CFG_PLLSEL_NUM	((0x1)  << SCG_PLL_CFG_PLLSEL_SHIFT)
+/* Clock source is System OSC */
+#define SCG1_SPLL_CFG_CLKSRC_NUM	((0x0)  << SCG_PLL_CFG_CLKSRC_SHIFT)
+#define SCG1_SPLL_CFG_NUM_24M_OSC	(SCG1_SPLL_CFG_POSTDIV2_NUM	| \
+					 SCG1_SPLL_CFG_POSTDIV1_NUM     | \
+					 (22 << SCG_PLL_CFG_MULT_SHIFT) | \
+					 SCG1_SPLL_CFG_PFDSEL_NUM       | \
+					 SCG1_SPLL_CFG_PREDIV_NUM       | \
+					 SCG1_SPLL_CFG_BYPASS_NUM       | \
+					 SCG1_SPLL_CFG_PLLSEL_NUM       | \
+					 SCG1_SPLL_CFG_CLKSRC_NUM)
+/*413Mhz = A7 SPLL(528MHz) * 18/23 */
+#define SCG1_SPLL_PFD0_FRAC_NUM		((23) << SCG_PLL_PFD0_FRAC_SHIFT)
+
+void scg_a7_spll_init(void)
+{
+	u32 val = 0;
+
+	/* Disable A7 System PLL */
+	val = readl(&scg1_regs->spllcsr);
+	val &= ~SCG_SPLL_CSR_SPLLEN_MASK;
+	writel(val, &scg1_regs->spllcsr);
+
+	/*
+	 * Per block guide,
+	 * "When changing PFD values, it is recommneded PFDx clock
+	 * gets gated first by writing a value of 1 to PFDx_CLKGATE register,
+	 * then program the new PFD value, then poll the PFDx_VALID
+	 * flag to set before writing a value of 0 to PFDx_CLKGATE
+	 * to ungate the PFDx clock and allow PFDx clock to run"
+	 */
+
+	/* Gate off A7 SPLL PFD0 ~ PDF4  */
+	val = readl(&scg1_regs->spllpfd);
+	val |= (SCG_PLL_PFD3_GATE_MASK |
+			SCG_PLL_PFD2_GATE_MASK |
+			SCG_PLL_PFD1_GATE_MASK |
+			SCG_PLL_PFD0_GATE_MASK);
+	writel(val, &scg1_regs->spllpfd);
+
+	/* ================ A7 SPLL Configuration Start ============== */
+
+	/* Configure A7 System PLL */
+	writel(SCG1_SPLL_CFG_NUM_24M_OSC, &scg1_regs->spllcfg);
+
+	/* Enable A7 System PLL */
+	val = readl(&scg1_regs->spllcsr);
+	val |= SCG_SPLL_CSR_SPLLEN_MASK;
+	writel(val, &scg1_regs->spllcsr);
+
+	/* Wait for A7 SPLL clock ready */
+	while (!(readl(&scg1_regs->spllcsr) & SCG_SPLL_CSR_SPLLVLD_MASK))
+		;
+
+	/* Configure A7 SPLL PFD0 */
+	val = readl(&scg1_regs->spllpfd);
+	val &= ~SCG_PLL_PFD0_FRAC_MASK;
+	val |= SCG1_SPLL_PFD0_FRAC_NUM;
+	writel(val, &scg1_regs->spllpfd);
+
+	/* Un-gate A7 SPLL PFD0 */
+	val = readl(&scg1_regs->spllpfd);
+	val &= ~SCG_PLL_PFD0_GATE_MASK;
+	writel(val, &scg1_regs->spllpfd);
+
+	/* Wait for A7 SPLL PFD0 clock being valid */
+	while (!(readl(&scg1_regs->spllpfd) & SCG_PLL_PFD0_VALID_MASK))
+		;
+
+	/* ================ A7 SPLL Configuration End ============== */
+}
+
+/* DDR clock source is APLL PFD0 (396MHz) */
+#define SCG1_DDRCCR_DDRCS_NUM		((0x0) << SCG_DDRCCR_DDRCS_SHIFT)
+/* DDR clock = APLL PFD0 / 1 = 396MHz / 1 = 396MHz */
+#define SCG1_DDRCCR_DDRDIV_NUM		((0x1) << SCG_DDRCCR_DDRDIV_SHIFT)
+/* DDR clock = APLL PFD0 / 2 = 396MHz / 2 = 198MHz */
+#define SCG1_DDRCCR_DDRDIV_LF_NUM	((0x2) << SCG_DDRCCR_DDRDIV_SHIFT)
+#define SCG1_DDRCCR_CFG_NUM		(SCG1_DDRCCR_DDRCS_NUM  | \
+					 SCG1_DDRCCR_DDRDIV_NUM)
+#define SCG1_DDRCCR_CFG_LF_NUM		(SCG1_DDRCCR_DDRCS_NUM  | \
+					 SCG1_DDRCCR_DDRDIV_LF_NUM)
+void scg_a7_ddrclk_init(void)
+{
+	writel(SCG1_DDRCCR_CFG_NUM, &scg1_regs->ddrccr);
+}
+
+/* SCG1(A7) APLLCFG configurations */
+/* divide by 1 <<28 */
+#define SCG1_APLL_CFG_POSTDIV2_NUM      ((0x0) << SCG_PLL_CFG_POSTDIV2_SHIFT)
+/* divide by 1 <<24 */
+#define SCG1_APLL_CFG_POSTDIV1_NUM      ((0x0) << SCG_PLL_CFG_POSTDIV1_SHIFT)
+/* MULT is 22  <<16 */
+#define SCG1_APLL_CFG_MULT_NUM          ((22)  << SCG_PLL_CFG_MULT_SHIFT)
+/* PFD0 output clock selected  <<14 */
+#define SCG1_APLL_CFG_PFDSEL_NUM        ((0) << SCG_PLL_CFG_PFDSEL_SHIFT)
+/* PREDIV = 1	<<8 */
+#define SCG1_APLL_CFG_PREDIV_NUM        ((0x0) << SCG_PLL_CFG_PREDIV_SHIFT)
+/* APLL output clocks (including PFD outputs) selected	<<2 */
+#define SCG1_APLL_CFG_BYPASS_NUM        ((0x0) << SCG_PLL_CFG_BYPASS_SHIFT)
+/* APLL PFD output clock selected <<1 */
+#define SCG1_APLL_CFG_PLLSEL_NUM        ((0x0) << SCG_PLL_CFG_PLLSEL_SHIFT)
+/* Clock source is System OSC <<0 */
+#define SCG1_APLL_CFG_CLKSRC_NUM        ((0x0) << SCG_PLL_CFG_CLKSRC_SHIFT)
+
+/* SCG1(A7) FIRC DIV configurations */
+/* Disable FIRC DIV3 */
+#define SCG1_FIRCDIV_DIV3_NUM           ((0x0) << SCG_FIRCDIV_DIV3_SHIFT)
+/* FIRC DIV2 = 48MHz / 1 = 48MHz */
+#define SCG1_FIRCDIV_DIV2_NUM           ((0x1) << SCG_FIRCDIV_DIV2_SHIFT)
+/* Disable FIRC DIV1 */
+#define SCG1_FIRCDIV_DIV1_NUM           ((0x0) << SCG_FIRCDIV_DIV1_SHIFT)
+
+void scg_a7_firc_init(void)
+{
+	/* Wait for FIRC clock ready */
+	while (!(readl(&scg1_regs->firccsr) & SCG_FIRC_CSR_FIRCVLD_MASK))
+		;
+
+	/* Configure A7 FIRC DIV1 ~ DIV3 */
+	writel((SCG1_FIRCDIV_DIV3_NUM |
+			SCG1_FIRCDIV_DIV2_NUM |
+			SCG1_FIRCDIV_DIV1_NUM), &scg1_regs->fircdiv);
+}
+
+/* SCG1(A7) NICCCR configurations */
+/* NIC clock source is DDR clock (396/198MHz) */
+#define SCG1_NICCCR_NICCS_NUM		((0x1) << SCG_NICCCR_NICCS_SHIFT)
+
+/* NIC0 clock = DDR Clock / 2 = 396MHz / 2 = 198MHz */
+#define SCG1_NICCCR_NIC0_DIV_NUM	((0x1) << SCG_NICCCR_NIC0_DIV_SHIFT)
+/* NIC0 clock = DDR Clock / 1 = 198MHz / 1 = 198MHz */
+#define SCG1_NICCCR_NIC0_DIV_LF_NUM	((0x0) << SCG_NICCCR_NIC0_DIV_SHIFT)
+/* NIC1 clock = NIC0 Clock / 1 = 198MHz / 2 = 198MHz */
+#define SCG1_NICCCR_NIC1_DIV_NUM	((0x0) << SCG_NICCCR_NIC1_DIV_SHIFT)
+/* NIC1 bus clock = NIC1 Clock / 3 = 198MHz / 3 = 66MHz */
+#define SCG1_NICCCR_NIC1_DIVBUS_NUM	((0x2) << SCG_NICCCR_NIC1_DIVBUS_SHIFT)
+#define SCG1_NICCCR_CFG_NUM		(SCG1_NICCCR_NICCS_NUM      | \
+					 SCG1_NICCCR_NIC0_DIV_NUM   | \
+					 SCG1_NICCCR_NIC1_DIV_NUM   | \
+					 SCG1_NICCCR_NIC1_DIVBUS_NUM)
+
+void scg_a7_nicclk_init(void)
+{
+	writel(SCG1_NICCCR_CFG_NUM, &scg1_regs->nicccr);
+}
+
+/* SCG1(A7) FIRC DIV configurations */
+/* Enable FIRC DIV3 */
+#define SCG1_SOSCDIV_DIV3_NUM		((0x1) << SCG_SOSCDIV_DIV3_SHIFT)
+/* FIRC DIV2 = 48MHz / 1 = 48MHz */
+#define SCG1_SOSCDIV_DIV2_NUM		((0x1) << SCG_SOSCDIV_DIV2_SHIFT)
+/* Enable FIRC DIV1 */
+#define SCG1_SOSCDIV_DIV1_NUM		((0x1) << SCG_SOSCDIV_DIV1_SHIFT)
+
+void scg_a7_soscdiv_init(void)
+{
+	/* Wait for FIRC clock ready */
+	while (!(readl(&scg1_regs->sosccsr) & SCG_SOSC_CSR_SOSCVLD_MASK))
+		;
+
+	/* Configure A7 FIRC DIV1 ~ DIV3 */
+	writel((SCG1_SOSCDIV_DIV3_NUM | SCG1_SOSCDIV_DIV2_NUM |
+	       SCG1_SOSCDIV_DIV1_NUM), &scg1_regs->soscdiv);
+}
+
+void scg_a7_sys_clk_sel(enum scg_sys_src clk)
+{
+	u32 rccr_reg_val = 0;
+
+	clk_debug("%s: system clock selected as %s\n", "[SCG]",
+		  clk == SCG_SCS_SYS_OSC ? "SYS_OSC" :
+		  clk == SCG_SCS_SLOW_IRC  ? "SLOW_IRC" :
+		  clk == SCG_SCS_FAST_IRC  ? "FAST_IRC" :
+		  clk == SCG_SCS_RTC_OSC   ? "RTC_OSC" :
+		  clk == SCG_SCS_AUX_PLL   ? "AUX_PLL" :
+		  clk == SCG_SCS_SYS_PLL   ? "SYS_PLL" :
+		  clk == SCG_SCS_USBPHY_PLL ? "USBPHY_PLL" :
+		  "Invalid source"
+	);
+
+	rccr_reg_val = readl(&scg1_regs->rccr);
+	rccr_reg_val &= ~SCG_CCR_SCS_MASK;
+	rccr_reg_val |= (clk << SCG_CCR_SCS_SHIFT);
+	writel(rccr_reg_val, &scg1_regs->rccr);
+}
+
+void scg_a7_info(void)
+{
+	debug("SCG Version: 0x%x\n", readl(&scg1_regs->verid));
+	debug("SCG Parameter: 0x%x\n", readl(&scg1_regs->param));
+	debug("SCG RCCR Value: 0x%x\n", readl(&scg1_regs->rccr));
+	debug("SCG Clock Status: 0x%x\n", readl(&scg1_regs->csr));
+}
+
+void scg_a7_init_core_clk(void)
+{
+	u32 val = 0;
+
+	/*
+	 * The normal target frequency for ULP B0 is 500Mhz,
+	 * but ROM set it to 413Mhz, need to change SPLL PFD0 FRAC
+	 */
+	if (soc_rev() >= CHIP_REV_2_0) {
+		/* Switch RCCR SCG to SOSC, firstly check the SOSC is valid */
+		if ((readl(&scg1_regs->sosccsr) & SCG_SOSC_CSR_SOSCVLD_MASK)) {
+			val = readl(&scg1_regs->rccr);
+			val &= (~SCG_CCR_SCS_MASK);
+			val |= ((SCG_SCS_SYS_OSC) << SCG_CCR_SCS_SHIFT);
+			writel(val, &scg1_regs->rccr);
+
+			/* Switch the PLLS to SPLL clk */
+			val = readl(&scg1_regs->spllcfg);
+			val &= ~SCG_PLL_CFG_PLLSEL_MASK;
+			writel(val, &scg1_regs->spllcfg);
+
+			/*
+			 * Re-configure PFD0 to 19,
+			 * A7 SPLL(528MHz) * 18 / 19 = 500MHz
+			 */
+			scg_enable_pll_pfd(SCG_SPLL_PFD0_CLK, 19);
+
+			/* Switch the PLLS to SPLL PFD0 */
+			val = readl(&scg1_regs->spllcfg);
+			val |= SCG_PLL_CFG_PLLSEL_MASK;
+			writel(val, &scg1_regs->spllcfg);
+
+			/* Set RCCR SCG to SPLL clk out */
+			val = readl(&scg1_regs->rccr);
+			val &= (~SCG_CCR_SCS_MASK);
+			val |= ((SCG_SCS_SYS_PLL) << SCG_CCR_SCS_SHIFT);
+			writel(val, &scg1_regs->rccr);
+		}
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mx7ulp/soc.c b/roms/u-boot/arch/arm/mach-imx/mx7ulp/soc.c
new file mode 100644
index 000000000..320f24dd2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mx7ulp/soc.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/hab.h>
+#include <linux/bitops.h>
+
+#define PMC0_BASE_ADDR		0x410a1000
+#define PMC0_CTRL		0x28
+#define PMC0_CTRL_LDOEN		BIT(31)
+#define PMC0_CTRL_LDOOKDIS	BIT(30)
+#define PMC0_CTRL_PMC1ON	BIT(24)
+#define PMC1_BASE_ADDR		0x40400000
+#define PMC1_RUN		0x8
+#define PMC1_STOP		0x10
+#define PMC1_VLPS		0x14
+#define PMC1_LDOVL_SHIFT	16
+#define PMC1_LDOVL_MASK		(0x3f << PMC1_LDOVL_SHIFT)
+#define PMC1_LDOVL_900		0x1e
+#define PMC1_LDOVL_950		0x23
+#define PMC1_STATUS		0x20
+#define PMC1_STATUS_LDOVLF	BIT(8)
+
+static char *get_reset_cause(char *);
+
+#if defined(CONFIG_IMX_HAB)
+struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
+	.bank = 29,
+	.word = 6,
+};
+#endif
+
+#define ROM_VERSION_ADDR 0x80
+u32 get_cpu_rev(void)
+{
+	/* Check the ROM version for cpu revision */
+	u32 rom_version = readl((void __iomem *)ROM_VERSION_ADDR);
+
+	return (MXC_CPU_MX7ULP << 12) | (rom_version & 0xFF);
+}
+
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	return get_cpu_rev();
+}
+#endif
+
+enum bt_mode get_boot_mode(void)
+{
+	u32 bt0_cfg = 0;
+
+	bt0_cfg = readl(CMC0_RBASE + 0x40);
+	bt0_cfg &= (BT0CFG_LPBOOT_MASK | BT0CFG_DUALBOOT_MASK);
+
+	if (!(bt0_cfg & BT0CFG_LPBOOT_MASK)) {
+		/* No low power boot */
+		if (bt0_cfg & BT0CFG_DUALBOOT_MASK)
+			return DUAL_BOOT;
+		else
+			return SINGLE_BOOT;
+	}
+
+	return LOW_POWER_BOOT;
+}
+
+int arch_cpu_init(void)
+{
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_POSTCLK_INIT
+int board_postclk_init(void)
+{
+	return 0;
+}
+#endif
+
+#define UNLOCK_WORD0 0xC520 /* 1st unlock word */
+#define UNLOCK_WORD1 0xD928 /* 2nd unlock word */
+#define REFRESH_WORD0 0xA602 /* 1st refresh word */
+#define REFRESH_WORD1 0xB480 /* 2nd refresh word */
+
+static void disable_wdog(u32 wdog_base)
+{
+	writel(UNLOCK_WORD0, (wdog_base + 0x04));
+	writel(UNLOCK_WORD1, (wdog_base + 0x04));
+	writel(0x0, (wdog_base + 0x0C)); /* Set WIN to 0 */
+	writel(0x400, (wdog_base + 0x08)); /* Set timeout to default 0x400 */
+	writel(0x120, (wdog_base + 0x00)); /* Disable it and set update */
+
+	writel(REFRESH_WORD0, (wdog_base + 0x04)); /* Refresh the CNT */
+	writel(REFRESH_WORD1, (wdog_base + 0x04));
+}
+
+void init_wdog(void)
+{
+	/*
+	 * ROM will configure WDOG1, disable it or enable it
+	 * depending on FUSE. The update bit is set for reconfigurable.
+	 * We have to use unlock sequence to reconfigure it.
+	 * WDOG2 is not touched by ROM, so it will have default value
+	 * which is enabled. We can directly configure it.
+	 * To simplify the codes, we still use same reconfigure
+	 * process as WDOG1. Because the update bit is not set for
+	 * WDOG2, the unlock sequence won't take effect really.
+	 * It actually directly configure the wdog.
+	 * In this function, we will disable both WDOG1 and WDOG2,
+	 * and set update bit for both. So that kernel can reconfigure them.
+	 */
+	disable_wdog(WDG1_RBASE);
+	disable_wdog(WDG2_RBASE);
+}
+
+static bool ldo_mode_is_enabled(void)
+{
+	unsigned int reg;
+
+	reg = readl(PMC0_BASE_ADDR + PMC0_CTRL);
+	if (reg & PMC0_CTRL_LDOEN)
+		return true;
+	else
+		return false;
+}
+
+#if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD))
+#if defined(CONFIG_LDO_ENABLED_MODE)
+static void init_ldo_mode(void)
+{
+	unsigned int reg;
+
+	if (ldo_mode_is_enabled())
+		return;
+
+	/* Set LDOOKDIS */
+	setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOOKDIS);
+
+	/* Set LDOVL to 0.95V in PMC1_RUN */
+	reg = readl(PMC1_BASE_ADDR + PMC1_RUN);
+	reg &= ~PMC1_LDOVL_MASK;
+	reg |= (PMC1_LDOVL_950 << PMC1_LDOVL_SHIFT);
+	writel(PMC1_BASE_ADDR + PMC1_RUN, reg);
+
+	/* Wait for LDOVLF to be cleared */
+	reg = readl(PMC1_BASE_ADDR + PMC1_STATUS);
+	while (reg & PMC1_STATUS_LDOVLF)
+		;
+
+	/* Set LDOVL to 0.95V in PMC1_STOP */
+	reg = readl(PMC1_BASE_ADDR + PMC1_STOP);
+	reg &= ~PMC1_LDOVL_MASK;
+	reg |= (PMC1_LDOVL_950 << PMC1_LDOVL_SHIFT);
+	writel(PMC1_BASE_ADDR + PMC1_STOP, reg);
+
+	/* Set LDOVL to 0.90V in PMC1_VLPS */
+	reg = readl(PMC1_BASE_ADDR + PMC1_VLPS);
+	reg &= ~PMC1_LDOVL_MASK;
+	reg |= (PMC1_LDOVL_900 << PMC1_LDOVL_SHIFT);
+	writel(PMC1_BASE_ADDR + PMC1_VLPS, reg);
+
+	/* Set LDOEN bit */
+	setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOEN);
+
+	/* Set the PMC1ON bit */
+	setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_PMC1ON);
+}
+#endif
+
+void s_init(void)
+{
+	/* Disable wdog */
+	init_wdog();
+
+	/* clock configuration. */
+	clock_init();
+
+	if (soc_rev() < CHIP_REV_2_0) {
+		/* enable dumb pmic */
+		writel((readl(SNVS_LP_LPCR) | SNVS_LPCR_DPEN), SNVS_LP_LPCR);
+	}
+
+#if defined(CONFIG_LDO_ENABLED_MODE)
+	init_ldo_mode();
+#endif
+	return;
+}
+#endif
+
+#ifndef CONFIG_ULP_WATCHDOG
+void reset_cpu(void)
+{
+	setbits_le32(SIM0_RBASE, SIM_SOPT1_A7_SW_RESET);
+	while (1)
+		;
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+const char *get_imx_type(u32 imxtype)
+{
+	return "7ULP";
+}
+
+int print_cpuinfo(void)
+{
+	u32 cpurev;
+	char cause[18];
+
+	cpurev = get_cpu_rev();
+
+	printf("CPU:   Freescale i.MX%s rev%d.%d at %d MHz\n",
+	       get_imx_type((cpurev & 0xFF000) >> 12),
+	       (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0,
+	       mxc_get_clock(MXC_ARM_CLK) / 1000000);
+
+	printf("Reset cause: %s\n", get_reset_cause(cause));
+
+	printf("Boot mode: ");
+	switch (get_boot_mode()) {
+	case LOW_POWER_BOOT:
+		printf("Low power boot\n");
+		break;
+	case DUAL_BOOT:
+		printf("Dual boot\n");
+		break;
+	case SINGLE_BOOT:
+	default:
+		printf("Single boot\n");
+		break;
+	}
+
+	if (ldo_mode_is_enabled())
+		printf("PMC1:  LDO enabled mode\n");
+	else
+		printf("PMC1:  LDO bypass mode\n");
+
+	return 0;
+}
+#endif
+
+#define CMC_SRS_TAMPER                    (1 << 31)
+#define CMC_SRS_SECURITY                  (1 << 30)
+#define CMC_SRS_TZWDG                     (1 << 29)
+#define CMC_SRS_JTAG_RST                  (1 << 28)
+#define CMC_SRS_CORE1                     (1 << 16)
+#define CMC_SRS_LOCKUP                    (1 << 15)
+#define CMC_SRS_SW                        (1 << 14)
+#define CMC_SRS_WDG                       (1 << 13)
+#define CMC_SRS_PIN_RESET                 (1 << 8)
+#define CMC_SRS_WARM                      (1 << 4)
+#define CMC_SRS_HVD                       (1 << 3)
+#define CMC_SRS_LVD                       (1 << 2)
+#define CMC_SRS_POR                       (1 << 1)
+#define CMC_SRS_WUP                       (1 << 0)
+
+static u32 reset_cause = -1;
+
+static char *get_reset_cause(char *ret)
+{
+	u32 cause1, cause = 0, srs = 0;
+	u32 *reg_ssrs = (u32 *)(SRC_BASE_ADDR + 0x28);
+	u32 *reg_srs = (u32 *)(SRC_BASE_ADDR + 0x20);
+
+	if (!ret)
+		return "null";
+
+	srs = readl(reg_srs);
+	cause1 = readl(reg_ssrs);
+	writel(cause1, reg_ssrs);
+
+	reset_cause = cause1;
+
+	cause = cause1 & (CMC_SRS_POR | CMC_SRS_WUP | CMC_SRS_WARM);
+
+	switch (cause) {
+	case CMC_SRS_POR:
+		sprintf(ret, "%s", "POR");
+		break;
+	case CMC_SRS_WUP:
+		sprintf(ret, "%s", "WUP");
+		break;
+	case CMC_SRS_WARM:
+		cause = cause1 & (CMC_SRS_WDG | CMC_SRS_SW |
+			CMC_SRS_JTAG_RST);
+		switch (cause) {
+		case CMC_SRS_WDG:
+			sprintf(ret, "%s", "WARM-WDG");
+			break;
+		case CMC_SRS_SW:
+			sprintf(ret, "%s", "WARM-SW");
+			break;
+		case CMC_SRS_JTAG_RST:
+			sprintf(ret, "%s", "WARM-JTAG");
+			break;
+		default:
+			sprintf(ret, "%s", "WARM-UNKN");
+			break;
+		}
+		break;
+	default:
+		sprintf(ret, "%s-%X", "UNKN", cause1);
+		break;
+	}
+
+	debug("[%X] SRS[%X] %X - ", cause1, srs, srs^cause1);
+	return ret;
+}
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+__weak int board_mmc_get_env_dev(int devno)
+{
+	return CONFIG_SYS_MMC_ENV_DEV;
+}
+
+int mmc_get_env_dev(void)
+{
+	int devno = 0;
+	u32 bt1_cfg = 0;
+
+	/* If not boot from sd/mmc, use default value */
+	if (get_boot_mode() == LOW_POWER_BOOT)
+		return CONFIG_SYS_MMC_ENV_DEV;
+
+	bt1_cfg = readl(CMC1_RBASE + 0x40);
+	devno = (bt1_cfg >> 9) & 0x7;
+
+	return board_mmc_get_env_dev(devno);
+}
+#endif
+
+enum boot_device get_boot_device(void)
+{
+	struct bootrom_sw_info **p =
+		(struct bootrom_sw_info **)ROM_SW_INFO_ADDR;
+
+	enum boot_device boot_dev = SD1_BOOT;
+	u8 boot_type = (*p)->boot_dev_type;
+	u8 boot_instance = (*p)->boot_dev_instance;
+
+	switch (boot_type) {
+	case BOOT_TYPE_SD:
+		boot_dev = boot_instance + SD1_BOOT;
+		break;
+	case BOOT_TYPE_MMC:
+		boot_dev = boot_instance + MMC1_BOOT;
+		break;
+	case BOOT_TYPE_USB:
+		boot_dev = USB_BOOT;
+		break;
+	default:
+		break;
+	}
+
+	return boot_dev;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/mxs/Kconfig b/roms/u-boot/arch/arm/mach-imx/mxs/Kconfig
new file mode 100644
index 000000000..9f48ffda4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/mxs/Kconfig
@@ -0,0 +1,61 @@
+if ARCH_MX23
+
+config MX23
+	bool
+	default y
+
+choice
+	prompt "MX23 board select"
+	optional
+
+config TARGET_MX23_OLINUXINO
+	bool "Support mx23_olinuxino"
+	select BOARD_EARLY_INIT_F
+
+config TARGET_MX23EVK
+	bool "Support mx23evk"
+	select BOARD_EARLY_INIT_F
+
+config TARGET_XFI3
+	bool "Support xfi3"
+
+endchoice
+
+config SYS_SOC
+	default "mxs"
+
+source "board/olimex/mx23_olinuxino/Kconfig"
+source "board/freescale/mx23evk/Kconfig"
+
+endif
+
+if ARCH_MX28
+
+config MX28
+	bool
+	default y
+
+choice
+	prompt "MX28 board select"
+	optional
+
+config TARGET_BG0900
+	bool "Support bg0900"
+
+config TARGET_MX28EVK
+	bool "Support mx28evk"
+	select BOARD_EARLY_INIT_F
+
+config TARGET_XEA
+	bool "Support XEA"
+
+endchoice
+
+config SYS_SOC
+	default "mxs"
+
+source "board/freescale/mx28evk/Kconfig"
+source "board/liebherr/xea/Kconfig"
+source "board/ppcag/bg0900/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-imx/priblob.c b/roms/u-boot/arch/arm/mach-imx/priblob.c
new file mode 100644
index 000000000..e253eddfd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/priblob.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+/*
+ * Boot command to get and set the PRIBLOB bitfield form the SCFGR register
+ * of the CAAM IP. It is recommended to set this bitfield to 3 once your
+ * encrypted boot image is ready, to prevent the generation of blobs usable
+ * to decrypt an encrypted boot image.
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <command.h>
+#include "../drivers/crypto/fsl_caam_internal.h"
+
+int do_priblob_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	writel((readl(CAAM_SCFGR) & 0xFFFFFFFC) | 3, CAAM_SCFGR);
+	printf("New priblob setting = 0x%x\n", readl(CAAM_SCFGR) & 0x3);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	set_priblob_bitfield, 1, 0, do_priblob_write,
+	"Set the PRIBLOB bitfield to 3",
+	"<value>\n"
+	"    - Write 3 in PRIBLOB bitfield of SCFGR regiter of CAAM IP.\n"
+	"    Prevent the generation of blobs usable to decrypt an\n"
+	"    encrypted boot image."
+);
diff --git a/roms/u-boot/arch/arm/mach-imx/rdc-sema.c b/roms/u-boot/arch/arm/mach-imx/rdc-sema.c
new file mode 100644
index 000000000..e68367375
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/rdc-sema.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/mach-imx/rdc-sema.h>
+#include <asm/arch/imx-rdc.h>
+#include <linux/errno.h>
+
+/*
+ * Check if the RDC Semaphore is required for this peripheral.
+ */
+static inline int imx_rdc_check_sema_required(int per_id)
+{
+	struct rdc_regs *imx_rdc = (struct rdc_regs *)RDC_BASE_ADDR;
+	u32 reg;
+
+	reg = readl(&imx_rdc->pdap[per_id]);
+	/*
+	 * No semaphore:
+	 * Intial value or this peripheral is assigned to only one domain
+	 */
+	if (!(reg & RDC_PDAP_SREQ_MASK))
+		return -ENOENT;
+
+	return 0;
+}
+
+/*
+ * Check the peripheral read / write access permission on Domain [dom_id].
+ */
+int imx_rdc_check_permission(int per_id, int dom_id)
+{
+	struct rdc_regs *imx_rdc = (struct rdc_regs *)RDC_BASE_ADDR;
+	u32 reg;
+
+	reg = readl(&imx_rdc->pdap[per_id]);
+	if (!(reg & RDC_PDAP_DRW_MASK(dom_id)))
+		return -EACCES;  /*No access*/
+
+	return 0;
+}
+
+/*
+ * Lock up the RDC semaphore for this peripheral if semaphore is required.
+ */
+int imx_rdc_sema_lock(int per_id)
+{
+	struct rdc_sema_regs *imx_rdc_sema;
+	int ret;
+	u8 reg;
+
+	ret = imx_rdc_check_sema_required(per_id);
+	if (ret)
+		return ret;
+
+	if (per_id < SEMA_GATES_NUM)
+		imx_rdc_sema  = (struct rdc_sema_regs *)SEMAPHORE1_BASE_ADDR;
+	else
+		imx_rdc_sema  = (struct rdc_sema_regs *)SEMAPHORE2_BASE_ADDR;
+
+	do {
+		writeb(RDC_SEMA_PROC_ID,
+		       &imx_rdc_sema->gate[per_id % SEMA_GATES_NUM]);
+		reg = readb(&imx_rdc_sema->gate[per_id % SEMA_GATES_NUM]);
+		if ((reg & RDC_SEMA_GATE_GTFSM_MASK) == RDC_SEMA_PROC_ID)
+			break;  /* Get the Semaphore*/
+	} while (1);
+
+	return 0;
+}
+
+/*
+ * Unlock the RDC semaphore for this peripheral if main CPU is the
+ * semaphore owner.
+ */
+int imx_rdc_sema_unlock(int per_id)
+{
+	struct rdc_sema_regs *imx_rdc_sema;
+	int ret;
+	u8 reg;
+
+	ret = imx_rdc_check_sema_required(per_id);
+	if (ret)
+		return ret;
+
+	if (per_id < SEMA_GATES_NUM)
+		imx_rdc_sema  = (struct rdc_sema_regs *)SEMAPHORE1_BASE_ADDR;
+	else
+		imx_rdc_sema  = (struct rdc_sema_regs *)SEMAPHORE2_BASE_ADDR;
+
+	reg = readb(&imx_rdc_sema->gate[per_id % SEMA_GATES_NUM]);
+	if ((reg & RDC_SEMA_GATE_GTFSM_MASK) != RDC_SEMA_PROC_ID)
+		return -EACCES;	/*Not the semaphore owner */
+
+	writeb(0x0, &imx_rdc_sema->gate[per_id % SEMA_GATES_NUM]);
+
+	return 0;
+}
+
+/*
+ * Setup RDC setting for one peripheral
+ */
+int imx_rdc_setup_peri(rdc_peri_cfg_t p)
+{
+	struct rdc_regs *imx_rdc = (struct rdc_regs *)RDC_BASE_ADDR;
+	u32 reg = 0;
+	u32 share_count = 0;
+	u32 peri_id = p & RDC_PERI_MASK;
+	u32 domain = (p & RDC_DOMAIN_MASK) >> RDC_DOMAIN_SHIFT_BASE;
+
+	/* No domain assigned */
+	if (domain == 0)
+		return -EINVAL;
+
+	reg |= domain;
+
+	share_count = (domain & 0x3)
+		+ ((domain >> 2) & 0x3)
+		+ ((domain >> 4) & 0x3)
+		+ ((domain >> 6) & 0x3);
+
+	if (share_count > 0x3)
+		reg |= RDC_PDAP_SREQ_MASK;
+
+	writel(reg, &imx_rdc->pdap[peri_id]);
+
+	return 0;
+}
+
+/*
+ * Setup RDC settings for multiple peripherals
+ */
+int imx_rdc_setup_peripherals(rdc_peri_cfg_t const *peripherals_list,
+				     unsigned count)
+{
+	rdc_peri_cfg_t const *p = peripherals_list;
+	int i, ret;
+
+	for (i = 0; i < count; i++) {
+		ret = imx_rdc_setup_peri(*p);
+		if (ret)
+			return ret;
+		p++;
+	}
+
+	return 0;
+}
+
+/*
+ * Setup RDC setting for one master
+ */
+int imx_rdc_setup_ma(rdc_ma_cfg_t p)
+{
+	struct rdc_regs *imx_rdc = (struct rdc_regs *)RDC_BASE_ADDR;
+	u32 master_id = (p & RDC_MASTER_MASK) >> RDC_MASTER_SHIFT;
+	u32 domain = (p & RDC_DOMAIN_MASK) >> RDC_DOMAIN_SHIFT_BASE;
+
+	writel((domain & RDC_MDA_DID_MASK), &imx_rdc->mda[master_id]);
+
+	return 0;
+}
+
+/*
+ * Setup RDC settings for multiple masters
+ */
+int imx_rdc_setup_masters(rdc_ma_cfg_t const *masters_list, unsigned count)
+{
+	rdc_ma_cfg_t const *p = masters_list;
+	int i, ret;
+
+	for (i = 0; i < count; i++) {
+		ret = imx_rdc_setup_ma(*p);
+		if (ret)
+			return ret;
+		p++;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/sata.c b/roms/u-boot/arch/arm/mach-imx/sata.c
new file mode 100644
index 000000000..c4599aaf6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/sata.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ */
+
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/arch/iomux.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+int setup_sata(void)
+{
+	struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	int ret;
+
+	if (!is_mx6dq() && !is_mx6dqp())
+		return 1;
+
+	ret = enable_sata_clock();
+	if (ret)
+		return ret;
+
+	clrsetbits_le32(&iomuxc_regs->gpr[13],
+			IOMUXC_GPR13_SATA_MASK,
+			IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
+			|IOMUXC_GPR13_SATA_PHY_7_SATA2M
+			|IOMUXC_GPR13_SATA_SPEED_3G
+			|(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
+			|IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
+			|IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
+			|IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
+			|IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
+			|IOMUXC_GPR13_SATA_PHY_1_SLOW);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/speed.c b/roms/u-boot/arch/arm/mach-imx/speed.c
new file mode 100644
index 000000000..b729187ec
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/speed.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/global_data.h>
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC_IMX
+#ifdef CONFIG_FSL_USDHC
+#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC3_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC4_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+#else
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#endif
+#else
+#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC4_BASE_ADDR
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+#else
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#endif
+#endif
+#endif
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/spl.c b/roms/u-boot/arch/arm/mach-imx/spl.c
new file mode 100644
index 000000000..36033d611
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/spl.c
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Copyright (C) 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/spl.h>
+#include <spl.h>
+#include <asm/mach-imx/hab.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <g_dnl.h>
+#include <linux/libfdt.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+	return 0;
+}
+
+#if defined(CONFIG_MX6)
+/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
+u32 spl_boot_device(void)
+{
+	unsigned int bmode = readl(&src_base->sbmr2);
+	u32 reg = imx6_src_get_boot_mode();
+
+	/*
+	 * Check for BMODE if serial downloader is enabled
+	 * BOOT_MODE - see IMX6DQRM Table 8-1
+	 */
+	if (((bmode >> 24) & 0x03) == 0x01) /* Serial Downloader */
+		return BOOT_DEVICE_BOARD;
+
+	/*
+	 * The above method does not detect that the boot ROM used
+	 * serial downloader in case the boot ROM decided to use the
+	 * serial downloader as a fall back (primary boot source failed).
+	 *
+	 * Infer that the boot ROM used the USB serial downloader by
+	 * checking whether the USB PHY is currently active... This
+	 * assumes that SPL did not (yet) initialize the USB PHY...
+	 */
+	if (is_usbotg_phy_active())
+		return BOOT_DEVICE_BOARD;
+
+	/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
+	switch ((reg & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
+	 /* EIM: See 8.5.1, Table 8-9 */
+	case IMX6_BMODE_EMI:
+		/* BOOT_CFG1[3]: NOR/OneNAND Selection */
+		switch ((reg & IMX6_BMODE_EMI_MASK) >> IMX6_BMODE_EMI_SHIFT) {
+		case IMX6_BMODE_ONENAND:
+			return BOOT_DEVICE_ONENAND;
+		case IMX6_BMODE_NOR:
+			return BOOT_DEVICE_NOR;
+		break;
+		}
+	/* Reserved: Used to force Serial Downloader */
+	case IMX6_BMODE_RESERVED:
+		return BOOT_DEVICE_BOARD;
+	/* SATA: See 8.5.4, Table 8-20 */
+#if !defined(CONFIG_MX6UL) && !defined(CONFIG_MX6ULL)
+	case IMX6_BMODE_SATA:
+		return BOOT_DEVICE_SATA;
+#endif
+	/* Serial ROM: See 8.5.5.1, Table 8-22 */
+	case IMX6_BMODE_SERIAL_ROM:
+		/* BOOT_CFG4[2:0] */
+		switch ((reg & IMX6_BMODE_SERIAL_ROM_MASK) >>
+			IMX6_BMODE_SERIAL_ROM_SHIFT) {
+		case IMX6_BMODE_ECSPI1:
+		case IMX6_BMODE_ECSPI2:
+		case IMX6_BMODE_ECSPI3:
+		case IMX6_BMODE_ECSPI4:
+		case IMX6_BMODE_ECSPI5:
+			return BOOT_DEVICE_SPI;
+		case IMX6_BMODE_I2C1:
+		case IMX6_BMODE_I2C2:
+		case IMX6_BMODE_I2C3:
+			return BOOT_DEVICE_I2C;
+		}
+		break;
+	/* SD/eSD: 8.5.3, Table 8-15  */
+	case IMX6_BMODE_SD:
+	case IMX6_BMODE_ESD:
+		return BOOT_DEVICE_MMC1;
+	/* MMC/eMMC: 8.5.3 */
+	case IMX6_BMODE_MMC:
+	case IMX6_BMODE_EMMC:
+		return BOOT_DEVICE_MMC1;
+	/* NAND Flash: 8.5.2, Table 8-10 */
+	case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX:
+		return BOOT_DEVICE_NAND;
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+	/* QSPI boot */
+	case IMX6_BMODE_QSPI:
+		return BOOT_DEVICE_SPI;
+#endif
+	}
+	return BOOT_DEVICE_NONE;
+}
+
+#elif defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || defined(CONFIG_IMX8)
+/* Translate iMX7/i.MX8M boot device to the SPL boot device enumeration */
+u32 spl_boot_device(void)
+{
+#if defined(CONFIG_MX7)
+	unsigned int bmode = readl(&src_base->sbmr2);
+
+	/*
+	 * Check for BMODE if serial downloader is enabled
+	 * BOOT_MODE - see IMX7DRM Table 6-24
+	 */
+	if (((bmode >> 24) & 0x03) == 0x01) /* Serial Downloader */
+		return BOOT_DEVICE_BOARD;
+
+	/*
+	 * The above method does not detect that the boot ROM used
+	 * serial downloader in case the boot ROM decided to use the
+	 * serial downloader as a fall back (primary boot source failed).
+	 *
+	 * Infer that the boot ROM used the USB serial downloader by
+	 * checking whether the USB PHY is currently active... This
+	 * assumes that SPL did not (yet) initialize the USB PHY...
+	 */
+	if (is_boot_from_usb())
+		return BOOT_DEVICE_BOARD;
+#endif
+
+	enum boot_device boot_device_spl = get_boot_device();
+
+	if (IS_ENABLED(CONFIG_IMX8MM) || IS_ENABLED(CONFIG_IMX8MN) ||
+	    IS_ENABLED(CONFIG_IMX8MP))
+		return spl_board_boot_device(boot_device_spl);
+
+	switch (boot_device_spl) {
+#if defined(CONFIG_MX7)
+	case SD1_BOOT:
+	case MMC1_BOOT:
+	case SD2_BOOT:
+	case MMC2_BOOT:
+	case SD3_BOOT:
+	case MMC3_BOOT:
+		return BOOT_DEVICE_MMC1;
+#elif defined(CONFIG_IMX8)
+	case MMC1_BOOT:
+		return BOOT_DEVICE_MMC1;
+	case SD2_BOOT:
+		return BOOT_DEVICE_MMC2_2;
+	case SD3_BOOT:
+		return BOOT_DEVICE_MMC1;
+	case FLEXSPI_BOOT:
+		return BOOT_DEVICE_SPI;
+#elif defined(CONFIG_IMX8M)
+	case SD1_BOOT:
+	case MMC1_BOOT:
+		return BOOT_DEVICE_MMC1;
+	case SD2_BOOT:
+	case MMC2_BOOT:
+		return BOOT_DEVICE_MMC2;
+#endif
+	case NAND_BOOT:
+		return BOOT_DEVICE_NAND;
+	case SPI_NOR_BOOT:
+		return BOOT_DEVICE_SPI;
+	case QSPI_BOOT:
+		return BOOT_DEVICE_NOR;
+	case USB_BOOT:
+		return BOOT_DEVICE_USB;
+	default:
+		return BOOT_DEVICE_NONE;
+	}
+}
+#endif /* CONFIG_MX7 || CONFIG_IMX8M || CONFIG_IMX8 */
+
+#ifdef CONFIG_SPL_USB_GADGET
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+	put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM + 0xfff, &dev->idProduct);
+
+	return 0;
+}
+
+#define SDPV_BCD_DEVICE 0x500
+int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+	return SDPV_BCD_DEVICE;
+}
+#endif
+
+#if defined(CONFIG_SPL_MMC_SUPPORT)
+/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+#if defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || defined(CONFIG_IMX8)
+	switch (get_boot_device()) {
+	/* for MMC return either RAW or FAT mode */
+	case SD1_BOOT:
+	case SD2_BOOT:
+	case SD3_BOOT:
+		if (IS_ENABLED(CONFIG_SPL_FS_FAT))
+			return MMCSD_MODE_FS;
+		else
+			return MMCSD_MODE_RAW;
+	case MMC1_BOOT:
+	case MMC2_BOOT:
+	case MMC3_BOOT:
+		if (IS_ENABLED(CONFIG_SPL_FS_FAT))
+			return MMCSD_MODE_FS;
+		else if (IS_ENABLED(CONFIG_SUPPORT_EMMC_BOOT))
+			return MMCSD_MODE_EMMCBOOT;
+		else
+			return MMCSD_MODE_RAW;
+	default:
+		puts("spl: ERROR:  unsupported device\n");
+		hang();
+	}
+#else
+	switch (boot_device) {
+	/* for MMC return either RAW or FAT mode */
+	case BOOT_DEVICE_MMC1:
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		if (IS_ENABLED(CONFIG_SPL_FS_FAT))
+			return MMCSD_MODE_FS;
+		else if (IS_ENABLED(CONFIG_SUPPORT_EMMC_BOOT))
+			return MMCSD_MODE_EMMCBOOT;
+		else
+			return MMCSD_MODE_RAW;
+	default:
+		puts("spl: ERROR:  unsupported device\n");
+		hang();
+	}
+#endif
+}
+#endif
+
+#if defined(CONFIG_IMX_HAB)
+
+/*
+ * +------------+  0x0 (DDR_UIMAGE_START) -
+ * |   Header   |                          |
+ * +------------+  0x40                    |
+ * |            |                          |
+ * |            |                          |
+ * |            |                          |
+ * |            |                          |
+ * | Image Data |                          |
+ * .            |                          |
+ * .            |                           > Stuff to be authenticated ----+
+ * .            |                          |                                |
+ * |            |                          |                                |
+ * |            |                          |                                |
+ * +------------+                          |                                |
+ * |            |                          |                                |
+ * | Fill Data  |                          |                                |
+ * |            |                          |                                |
+ * +------------+ Align to ALIGN_SIZE      |                                |
+ * |    IVT     |                          |                                |
+ * +------------+ + IVT_SIZE              -                                 |
+ * |            |                                                           |
+ * |  CSF DATA  | <---------------------------------------------------------+
+ * |            |
+ * +------------+
+ * |            |
+ * | Fill Data  |
+ * |            |
+ * +------------+ + CSF_PAD_SIZE
+ */
+
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+	typedef void __noreturn (*image_entry_noargs_t)(void);
+	uint32_t offset;
+
+	image_entry_noargs_t image_entry =
+		(image_entry_noargs_t)(unsigned long)spl_image->entry_point;
+
+	debug("image entry point: 0x%lX\n", spl_image->entry_point);
+
+	if (spl_image->flags & SPL_FIT_FOUND) {
+		image_entry();
+	} else {
+		/*
+		 * HAB looks for the CSF at the end of the authenticated
+		 * data therefore, we need to subtract the size of the
+		 * CSF from the actual filesize
+		 */
+		offset = spl_image->size - CONFIG_CSF_SIZE;
+		if (!imx_hab_authenticate_image(spl_image->load_addr,
+						offset + IVT_SIZE +
+						CSF_PAD_SIZE, offset)) {
+			image_entry();
+		} else {
+			panic("spl: ERROR:  image authentication fail\n");
+		}
+	}
+}
+
+#if !defined(CONFIG_SPL_FIT_SIGNATURE)
+ulong board_spl_fit_size_align(ulong size)
+{
+	/*
+	 * HAB authenticate_image requests the IVT offset is
+	 * aligned to 0x1000
+	 */
+
+	size = ALIGN(size, 0x1000);
+	size += CONFIG_CSF_SIZE;
+
+	return size;
+}
+
+void board_spl_fit_post_load(const void *fit)
+{
+	u32 offset = ALIGN(fdt_totalsize(fit), 0x1000);
+
+	if (imx_hab_authenticate_image((uintptr_t)fit,
+				       offset + IVT_SIZE + CSF_PAD_SIZE,
+				       offset)) {
+		panic("spl: ERROR:  image authentication unsuccessful\n");
+	}
+}
+#endif
+
+#endif
+
+#if defined(CONFIG_MX6) && defined(CONFIG_SPL_OS_BOOT)
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = imx_ddr_size();
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/spl_imx_romapi.c b/roms/u-boot/arch/arm/mach-imx/spl_imx_romapi.c
new file mode 100644
index 000000000..d2085dabd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/spl_imx_romapi.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <image.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <linux/libfdt.h>
+#include <spl.h>
+
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int is_boot_from_stream_device(u32 boot)
+{
+	u32 interface;
+
+	interface = boot >> 16;
+	if (interface >= BT_DEV_TYPE_USB)
+		return 1;
+
+	if (interface == BT_DEV_TYPE_MMC && (boot & 1))
+		return 1;
+
+	return 0;
+}
+
+static ulong spl_romapi_read_seekable(struct spl_load_info *load,
+				      ulong sector, ulong count,
+				      void *buf)
+{
+	u32 pagesize = *(u32 *)load->priv;
+	volatile gd_t *pgd = gd;
+	ulong byte = count * pagesize;
+	int ret;
+	u32 offset;
+
+	offset = sector * pagesize;
+
+	debug("ROM API load from 0x%x, size 0x%x\n", offset, (u32)byte);
+
+	ret = g_rom_api->download_image(buf, offset, byte,
+					((uintptr_t)buf) ^ offset ^ byte);
+	set_gd(pgd);
+
+	if (ret == ROM_API_OKAY)
+		return count;
+
+	printf("ROM API Failure when load 0x%x\n", offset);
+
+	return 0;
+}
+
+static int spl_romapi_load_image_seekable(struct spl_image_info *spl_image,
+					  struct spl_boot_device *bootdev,
+					  u32 rom_bt_dev)
+{
+	volatile gd_t *pgd = gd;
+	int ret;
+	u32 offset;
+	u32 pagesize, size;
+	struct image_header *header;
+	u32 image_offset;
+
+	ret = g_rom_api->query_boot_infor(QUERY_IVT_OFF, &offset,
+					  ((uintptr_t)&offset) ^ QUERY_IVT_OFF);
+	ret |= g_rom_api->query_boot_infor(QUERY_PAGE_SZ, &pagesize,
+					   ((uintptr_t)&pagesize) ^ QUERY_PAGE_SZ);
+	ret |= g_rom_api->query_boot_infor(QUERY_IMG_OFF, &image_offset,
+					   ((uintptr_t)&image_offset) ^ QUERY_IMG_OFF);
+
+	set_gd(pgd);
+
+	if (ret != ROM_API_OKAY) {
+		puts("ROMAPI: Failure query boot infor pagesize/offset\n");
+		return -1;
+	}
+
+	header = (struct image_header *)(CONFIG_SPL_IMX_ROMAPI_LOADADDR);
+
+	printf("image offset 0x%x, pagesize 0x%x, ivt offset 0x%x\n",
+	       image_offset, pagesize, offset);
+
+	if (((rom_bt_dev >> 16) & 0xff) ==  BT_DEV_TYPE_FLEXSPINOR)
+		offset = CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512;
+	else
+		offset = image_offset +
+			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000;
+
+	size = ALIGN(sizeof(struct image_header), pagesize);
+	ret = g_rom_api->download_image((u8 *)header, offset, size,
+					((uintptr_t)header) ^ offset ^ size);
+	set_gd(pgd);
+
+	if (ret != ROM_API_OKAY) {
+		printf("ROMAPI: download failure offset 0x%x size 0x%x\n",
+		       offset, size);
+		return -1;
+	}
+
+	if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
+	    image_get_magic(header) == FDT_MAGIC) {
+		struct spl_load_info load;
+
+		memset(&load, 0, sizeof(load));
+		load.bl_len = pagesize;
+		load.read = spl_romapi_read_seekable;
+		load.priv = &pagesize;
+		return spl_load_simple_fit(spl_image, &load,
+					   offset / pagesize, header);
+	} else {
+		/* TODO */
+		puts("Can't support legacy image\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
+			       ulong count, void *buf)
+{
+	memcpy(buf, (void *)(sector), count);
+
+	if (load->priv) {
+		ulong *p = (ulong *)load->priv;
+		ulong total = sector + count;
+
+		if (total > *p)
+			*p = total;
+	}
+
+	return count;
+}
+
+static ulong get_fit_image_size(void *fit)
+{
+	struct spl_image_info spl_image;
+	struct spl_load_info spl_load_info;
+	ulong last = (ulong)fit;
+
+	memset(&spl_load_info, 0, sizeof(spl_load_info));
+	spl_load_info.bl_len = 1;
+	spl_load_info.read = spl_ram_load_read;
+	spl_load_info.priv = &last;
+
+	spl_load_simple_fit(&spl_image, &spl_load_info,
+			    (uintptr_t)fit, fit);
+
+	return last - (ulong)fit;
+}
+
+u8 *search_fit_header(u8 *p, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i += 4)
+		if (genimg_get_format(p + i) == IMAGE_FORMAT_FIT)
+			return p + i;
+
+	return NULL;
+}
+
+static int spl_romapi_load_image_stream(struct spl_image_info *spl_image,
+					struct spl_boot_device *bootdev)
+{
+	struct spl_load_info load;
+	volatile gd_t *pgd = gd;
+	u32 pagesize, pg;
+	int ret;
+	int i = 0;
+	u8 *p = (u8 *)CONFIG_SPL_IMX_ROMAPI_LOADADDR;
+	u8 *pfit = NULL;
+	int imagesize;
+	int total;
+
+	ret = g_rom_api->query_boot_infor(QUERY_PAGE_SZ, &pagesize,
+					  ((uintptr_t)&pagesize) ^ QUERY_PAGE_SZ);
+	set_gd(pgd);
+
+	if (ret != ROM_API_OKAY)
+		puts("failure at query_boot_info\n");
+
+	pg = pagesize;
+	if (pg < 1024)
+		pg = 1024;
+
+	for (i = 0; i < 640; i++) {
+		ret = g_rom_api->download_image(p, 0, pg,
+						((uintptr_t)p) ^ pg);
+		set_gd(pgd);
+
+		if (ret != ROM_API_OKAY) {
+			puts("Steam(USB) download failure\n");
+			return -1;
+		}
+
+		pfit = search_fit_header(p, pg);
+		p += pg;
+
+		if (pfit)
+			break;
+	}
+
+	if (!pfit) {
+		puts("Can't found uboot FIT image in 640K range \n");
+		return -1;
+	}
+
+	if (p - pfit < sizeof(struct fdt_header)) {
+		ret = g_rom_api->download_image(p, 0, pg,  ((uintptr_t)p) ^ pg);
+		set_gd(pgd);
+
+		if (ret != ROM_API_OKAY) {
+			puts("Steam(USB) download failure\n");
+			return -1;
+		}
+
+		p += pg;
+	}
+
+	imagesize = fit_get_size(pfit);
+	printf("Find FIT header 0x&%p, size %d\n", pfit, imagesize);
+
+	if (p - pfit < imagesize) {
+		imagesize -= p - pfit;
+		/*need pagesize hear after ROM fix USB problme*/
+		imagesize += pg - 1;
+		imagesize /= pg;
+		imagesize *= pg;
+
+		printf("Need continue download %d\n", imagesize);
+
+		ret = g_rom_api->download_image(p, 0, imagesize,
+						((uintptr_t)p) ^ imagesize);
+		set_gd(pgd);
+
+		p += imagesize;
+
+		if (ret != ROM_API_OKAY) {
+			printf("Failure download %d\n", imagesize);
+			return -1;
+		}
+	}
+
+	total = get_fit_image_size(pfit);
+	total += 3;
+	total &= ~0x3;
+
+	imagesize = total - (p - pfit);
+
+	imagesize += pagesize - 1;
+	imagesize /= pagesize;
+	imagesize *= pagesize;
+
+	printf("Download %d, total fit %d\n", imagesize, total);
+
+	ret = g_rom_api->download_image(p, 0, imagesize,
+					((uintptr_t)p) ^ imagesize);
+	if (ret != ROM_API_OKAY)
+		printf("ROM download failure %d\n", imagesize);
+
+	memset(&load, 0, sizeof(load));
+	load.bl_len = 1;
+	load.read = spl_ram_load_read;
+
+	return spl_load_simple_fit(spl_image, &load, (ulong)pfit, pfit);
+}
+
+int board_return_to_bootrom(struct spl_image_info *spl_image,
+			    struct spl_boot_device *bootdev)
+{
+	volatile gd_t *pgd = gd;
+	int ret;
+	u32 boot;
+
+	ret = g_rom_api->query_boot_infor(QUERY_BT_DEV, &boot,
+					  ((uintptr_t)&boot) ^ QUERY_BT_DEV);
+	set_gd(pgd);
+
+	if (ret != ROM_API_OKAY) {
+		puts("ROMAPI: failure at query_boot_info\n");
+		return -1;
+	}
+
+	if (is_boot_from_stream_device(boot))
+		return spl_romapi_load_image_stream(spl_image, bootdev);
+
+	return spl_romapi_load_image_seekable(spl_image, bootdev, boot);
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/spl_qspi.cfg b/roms/u-boot/arch/arm/mach-imx/spl_qspi.cfg
new file mode 100644
index 000000000..1e39ae2f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/spl_qspi.cfg
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+IMAGE_VERSION	2
+BOOT_FROM	qspi
+
+/*
+ * Secure boot support
+ */
+#ifdef CONFIG_IMX_HAB
+CSF CONFIG_CSF_SIZE
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/spl_sd.cfg b/roms/u-boot/arch/arm/mach-imx/spl_sd.cfg
new file mode 100644
index 000000000..dbaee8153
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/spl_sd.cfg
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+IMAGE_VERSION	2
+BOOT_FROM	sd
+
+/*
+ * Secure boot support
+ */
+#ifdef CONFIG_IMX_HAB
+CSF CONFIG_CSF_SIZE
+#endif
diff --git a/roms/u-boot/arch/arm/mach-imx/syscounter.c b/roms/u-boot/arch/arm/mach-imx/syscounter.c
new file mode 100644
index 000000000..6dfed365d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/syscounter.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * The file use ls102xa/timer.c as a reference.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/syscounter.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+	ulong ticks;
+
+	if (usec < 1000)
+		ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+	else
+		ticks = ((usec / 10) * (get_tbclk() / 100000));
+
+	return ticks;
+}
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, freq);
+
+	return tick;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long usec)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	usec = usec * freq  + 999999;
+	do_div(usec, 1000000);
+
+	return usec;
+}
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+int timer_init(void)
+{
+	struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
+	unsigned long val, freq;
+
+	freq = CONFIG_SC_TIMER_CLK;
+	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+	writel(freq, &sctr->cntfid0);
+
+	/* Enable system counter */
+	val = readl(&sctr->cntcr);
+	val &= ~(SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1);
+	val |= SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG;
+	writel(val, &sctr->cntcr);
+
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+
+	return 0;
+}
+#endif
+
+unsigned long long get_ticks(void)
+{
+	unsigned long long now;
+
+	asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now));
+
+	gd->arch.tbl = (unsigned long)(now & 0xffffffff);
+	gd->arch.tbu = (unsigned long)(now >> 32);
+
+	return now;
+}
+
+ulong get_timer(ulong base)
+{
+	return tick_to_time(get_ticks()) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned long long tmp;
+	ulong tmo;
+
+	tmo = us_to_tick(usec);
+	tmp = get_ticks() + tmo;	/* get current timestamp */
+
+	while (get_ticks() < tmp)	/* loop till event */
+		 /*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	return freq;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/timer.c b/roms/u-boot/arch/arm/mach-imx/timer.c
new file mode 100644
index 000000000..fcd45f09f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/timer.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/global_data.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+/* General purpose timers registers */
+struct mxc_gpt {
+	unsigned int control;
+	unsigned int prescaler;
+	unsigned int status;
+	unsigned int nouse[6];
+	unsigned int counter;
+};
+
+static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR;
+
+/* General purpose timers bitfields */
+#define GPTCR_SWR		(1 << 15)	/* Software reset */
+#define GPTCR_24MEN	    (1 << 10)	/* Enable 24MHz clock input */
+#define GPTCR_FRR		(1 << 9)	/* Freerun / restart */
+#define GPTCR_CLKSOURCE_32	(4 << 6)	/* Clock source 32khz */
+#define GPTCR_CLKSOURCE_OSC	(5 << 6)	/* Clock source OSC */
+#define GPTCR_CLKSOURCE_PRE	(1 << 6)	/* Clock source PRECLK */
+#define GPTCR_CLKSOURCE_MASK (0x7 << 6)
+#define GPTCR_TEN		1		/* Timer enable */
+
+#define GPTPR_PRESCALER24M_SHIFT 12
+#define GPTPR_PRESCALER24M_MASK (0xF << GPTPR_PRESCALER24M_SHIFT)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline int gpt_has_clk_source_osc(void)
+{
+	if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
+	    is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() ||
+	    is_mx6ull() || is_mx6sll() || is_mx7())
+		return 1;
+
+	return 0;
+}
+
+static inline ulong gpt_get_clk(void)
+{
+#ifdef CONFIG_MXC_GPT_HCLK
+	if (gpt_has_clk_source_osc())
+		return MXC_HCLK >> 3;
+	else
+		return mxc_get_clock(MXC_IPG_PERCLK);
+#else
+	return MXC_CLK32;
+#endif
+}
+
+int timer_init(void)
+{
+	int i;
+
+	/* setup GP Timer 1 */
+	__raw_writel(GPTCR_SWR, &cur_gpt->control);
+
+	/* We have no udelay by now */
+	for (i = 0; i < 100; i++)
+		__raw_writel(0, &cur_gpt->control);
+
+	i = __raw_readl(&cur_gpt->control);
+	i &= ~GPTCR_CLKSOURCE_MASK;
+
+#ifdef CONFIG_MXC_GPT_HCLK
+	if (gpt_has_clk_source_osc()) {
+		i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
+
+		/*
+		 * For DL/S, SX, UL, ULL, SLL set 24Mhz OSC
+		 * Enable bit and prescaler
+		 */
+		if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull() ||
+		    is_mx6sll() || is_mx7()) {
+			i |= GPTCR_24MEN;
+
+			/* Produce 3Mhz clock */
+			__raw_writel((7 << GPTPR_PRESCALER24M_SHIFT),
+				     &cur_gpt->prescaler);
+		}
+	} else {
+		i |= GPTCR_CLKSOURCE_PRE | GPTCR_TEN;
+	}
+#else
+	__raw_writel(0, &cur_gpt->prescaler); /* 32Khz */
+	i |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
+#endif
+	__raw_writel(i, &cur_gpt->control);
+
+	gd->arch.tbl = __raw_readl(&cur_gpt->counter);
+	gd->arch.tbu = 0;
+
+	return 0;
+}
+
+unsigned long timer_read_counter(void)
+{
+	return __raw_readl(&cur_gpt->counter); /* current tick value */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return gpt_get_clk();
+}
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long _usec)
+{
+	unsigned long long usec = _usec;
+
+	usec *= get_tbclk();
+	usec += 999999;
+	do_div(usec, 1000000);
+
+	return usec;
+}
diff --git a/roms/u-boot/arch/arm/mach-imx/video.c b/roms/u-boot/arch/arm/mach-imx/video.c
new file mode 100644
index 000000000..1bc9b7cc7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-imx/video.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <env.h>
+#include <linux/errno.h>
+#include <asm/mach-imx/video.h>
+
+#ifdef CONFIG_IMX_HDMI
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/io.h>
+
+int detect_hdmi(struct display_info_t const *dev)
+{
+	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
+}
+#endif
+
+int board_video_skip(void)
+{
+	int i;
+	int ret = 0;
+	char const *panel = env_get("panel");
+
+	if (!panel) {
+		for (i = 0; i < display_count; i++) {
+			struct display_info_t const *dev = displays+i;
+			if (dev->detect && dev->detect(dev)) {
+				panel = dev->mode.name;
+				printf("auto-detected panel %s\n", panel);
+				break;
+			}
+		}
+		if (!panel) {
+			panel = displays[0].mode.name;
+			printf("No panel detected: default to %s\n", panel);
+			i = 0;
+		}
+	} else {
+		for (i = 0; i < display_count; i++) {
+			if (!strcmp(panel, displays[i].mode.name))
+				break;
+		}
+	}
+
+	if (i < display_count) {
+		ret = ipuv3_fb_init(&displays[i].mode, displays[i].di ? 1 : 0,
+				    displays[i].pixfmt);
+		if (!ret) {
+			if (displays[i].enable)
+				displays[i].enable(displays + i);
+
+			printf("Display: %s (%ux%u)\n",
+			       displays[i].mode.name,
+			       displays[i].mode.xres,
+			       displays[i].mode.yres);
+
+#ifdef CONFIG_IMX_HDMI
+			if (!strcmp(displays[i].mode.name, "HDMI"))
+				imx_enable_hdmi_phy();
+#endif
+		} else
+			printf("LCD %s cannot be configured: %d\n",
+			       displays[i].mode.name, ret);
+	} else {
+		printf("unsupported panel %s\n", panel);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+int ipu_displays_init(void)
+{
+	return board_video_skip();
+}
diff --git a/roms/u-boot/arch/arm/mach-integrator/Kconfig b/roms/u-boot/arch/arm/mach-integrator/Kconfig
new file mode 100644
index 000000000..d506ee5b3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-integrator/Kconfig
@@ -0,0 +1,59 @@
+menu "Integrator Options"
+	depends on ARCH_INTEGRATOR
+
+choice
+	prompt "Integrator platform select"
+	optional
+
+config ARCH_INTEGRATOR_AP
+	bool "Support Integrator/AP platform"
+
+config ARCH_INTEGRATOR_CP
+	bool "Support Integrator/CP platform"
+	select ARCH_CINTEGRATOR
+
+endchoice
+
+config ARCH_CINTEGRATOR
+	bool
+
+choice
+	prompt "Integrator core module select"
+	optional
+
+config CM720T
+	bool "Core Module for ARM720T"
+	select CPU_ARM720T
+
+config CM920T
+	bool "Core Module for ARM920T"
+	select CPU_ARM920T
+
+config CM926EJ_S
+	bool "Core Module for ARM926EJ-STM"
+	select CPU_ARM926EJS
+
+config CM946ES
+	bool "Core Module for ARM946E-STM"
+	select CPU_ARM946ES
+
+config CM1136
+	bool "Core Module for ARM1136JF-STM"
+	select CPU_ARM1136
+
+endchoice
+
+config SYS_BOARD
+	default "integrator"
+
+config SYS_VENDOR
+	default "armltd"
+
+config SYS_CONFIG_NAME
+	default "integratorap" if ARCH_INTEGRATOR_AP
+	default "integratorcp" if ARCH_INTEGRATOR_CP
+
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
+endmenu
diff --git a/roms/u-boot/arch/arm/mach-ipq40xx/Kconfig b/roms/u-boot/arch/arm/mach-ipq40xx/Kconfig
new file mode 100644
index 000000000..4eef80e93
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-ipq40xx/Kconfig
@@ -0,0 +1,15 @@
+if ARCH_IPQ40XX
+
+config SYS_SOC
+	default "ipq40xx"
+
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
+config SYS_TEXT_BASE
+	default 0x87300000
+
+config NR_DRAM_BANKS
+	default 1
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-ipq40xx/Makefile b/roms/u-boot/arch/arm/mach-ipq40xx/Makefile
new file mode 100644
index 000000000..08a65b885
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-ipq40xx/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2019 Sartura Ltd.
+#
+# Author: Robert Marko <robert.marko@sartura.hr>
+
+obj-y += clock-ipq4019.o
+obj-y += pinctrl-snapdragon.o
+obj-y += pinctrl-ipq4019.o
diff --git a/roms/u-boot/arch/arm/mach-ipq40xx/clock-ipq4019.c b/roms/u-boot/arch/arm/mach-ipq40xx/clock-ipq4019.c
new file mode 100644
index 000000000..c1d5c4ecd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-ipq40xx/clock-ipq4019.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock drivers for Qualcomm IPQ40xx
+ *
+ * Copyright (c) 2020 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *
+ */
+
+#include <clk-uclass.h>
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+
+#include <dt-bindings/clock/qcom,ipq4019-gcc.h>
+
+struct msm_clk_priv {
+	phys_addr_t base;
+};
+
+ulong msm_set_rate(struct clk *clk, ulong rate)
+{
+	switch (clk->id) {
+	case GCC_BLSP1_UART1_APPS_CLK: /*UART1*/
+		/* This clock is already initialized by SBL1 */
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int msm_clk_probe(struct udevice *dev)
+{
+	struct msm_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static ulong msm_clk_set_rate(struct clk *clk, ulong rate)
+{
+	return msm_set_rate(clk, rate);
+}
+
+static int msm_enable(struct clk *clk)
+{
+	switch (clk->id) {
+	case GCC_BLSP1_QUP1_SPI_APPS_CLK: /*SPI1*/
+		/* This clock is already initialized by SBL1 */
+		return 0;
+	case GCC_PRNG_AHB_CLK: /*PRNG*/
+		/* This clock is already initialized by SBL1 */
+		return 0;
+	case GCC_USB3_MASTER_CLK:
+	case GCC_USB3_SLEEP_CLK:
+	case GCC_USB3_MOCK_UTMI_CLK:
+	case GCC_USB2_MASTER_CLK:
+	case GCC_USB2_SLEEP_CLK:
+	case GCC_USB2_MOCK_UTMI_CLK:
+		/* These clocks is already initialized by SBL1 */
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct clk_ops msm_clk_ops = {
+	.set_rate = msm_clk_set_rate,
+	.enable = msm_enable,
+};
+
+static const struct udevice_id msm_clk_ids[] = {
+	{ .compatible = "qcom,gcc-ipq4019" },
+	{ }
+};
+
+U_BOOT_DRIVER(clk_msm) = {
+	.name		= "clk_msm",
+	.id		= UCLASS_CLK,
+	.of_match	= msm_clk_ids,
+	.ops		= &msm_clk_ops,
+	.priv_auto	= sizeof(struct msm_clk_priv),
+	.probe		= msm_clk_probe,
+};
diff --git a/roms/u-boot/arch/arm/mach-ipq40xx/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-ipq40xx/include/mach/gpio.h
new file mode 100644
index 000000000..a45747c0f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-ipq40xx/include/mach/gpio.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Empty gpio.h
+ *
+ * This file must stay as arch/arm/include/asm/gpio.h requires it.
+ *
+ * Copyright (c) 2019 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ */
diff --git a/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-ipq4019.c b/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-ipq4019.c
new file mode 100644
index 000000000..3e365f8cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-ipq4019.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm IPQ40xx pinctrl
+ *
+ * Copyright (c) 2019 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ */
+
+#include "pinctrl-snapdragon.h"
+#include <common.h>
+
+#define MAX_PIN_NAME_LEN 32
+static char pin_name[MAX_PIN_NAME_LEN];
+
+static const struct pinctrl_function msm_pinctrl_functions[] = {
+	{"gpio", 0},
+	{"blsp_uart0_0", 1}, /* Only for GPIO:16,17 */
+	{"blsp_uart0_1", 2}, /* Only for GPIO:60,61 */
+	{"blsp_uart1", 1},
+	{"blsp_spi0_0", 1}, /* Only for GPIO:12,13,14,15 */
+	{"blsp_spi0_1", 2}, /* Only for GPIO:54,55,56,57 */
+	{"blsp_spi1", 2},
+	{"mdio_0", 1}, /* Only for GPIO6 */
+	{"mdio_1", 2}, /* Only for GPIO53 */
+	{"mdc_0", 1}, /* Only for GPIO7 */
+	{"mdc_1", 2}, /* Only for GPIO52 */
+};
+
+static const char *ipq4019_get_function_name(struct udevice *dev,
+					     unsigned int selector)
+{
+	return msm_pinctrl_functions[selector].name;
+}
+
+static const char *ipq4019_get_pin_name(struct udevice *dev,
+					unsigned int selector)
+{
+	snprintf(pin_name, MAX_PIN_NAME_LEN, "GPIO_%u", selector);
+	return pin_name;
+}
+
+static unsigned int ipq4019_get_function_mux(unsigned int selector)
+{
+	return msm_pinctrl_functions[selector].val;
+}
+
+struct msm_pinctrl_data ipq4019_data = {
+	.pin_count = 100,
+	.functions_count = ARRAY_SIZE(msm_pinctrl_functions),
+	.get_function_name = ipq4019_get_function_name,
+	.get_function_mux = ipq4019_get_function_mux,
+	.get_pin_name = ipq4019_get_pin_name,
+};
diff --git a/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-snapdragon.c b/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-snapdragon.c
new file mode 100644
index 000000000..c51a75ee9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-snapdragon.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TLMM driver for Qualcomm IPQ40xx
+ *
+ * (C) Copyright 2018 Ramon Fried <ramon.fried@gmail.com>
+ *
+ * Copyright (c) 2020 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <dm/pinctrl.h>
+#include <linux/bitops.h>
+#include "pinctrl-snapdragon.h"
+
+struct msm_pinctrl_priv {
+	phys_addr_t base;
+	struct msm_pinctrl_data *data;
+};
+
+#define GPIO_CONFIG_OFFSET(x)         ((x) * 0x1000)
+#define TLMM_GPIO_PULL_MASK GENMASK(1, 0)
+#define TLMM_FUNC_SEL_MASK GENMASK(5, 2)
+#define TLMM_DRV_STRENGTH_MASK GENMASK(8, 6)
+#define TLMM_GPIO_DISABLE BIT(9)
+
+static const struct pinconf_param msm_conf_params[] = {
+	{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 2 },
+	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
+	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 2 },
+};
+
+static int msm_get_functions_count(struct udevice *dev)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	return priv->data->functions_count;
+}
+
+static int msm_get_pins_count(struct udevice *dev)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	return priv->data->pin_count;
+}
+
+static const char *msm_get_function_name(struct udevice *dev,
+					 unsigned int selector)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	return priv->data->get_function_name(dev, selector);
+}
+
+static int msm_pinctrl_probe(struct udevice *dev)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	priv->base = devfdt_get_addr(dev);
+	priv->data = (struct msm_pinctrl_data *)dev->driver_data;
+
+	return priv->base == FDT_ADDR_T_NONE ? -EINVAL : 0;
+}
+
+static const char *msm_get_pin_name(struct udevice *dev, unsigned int selector)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	return priv->data->get_pin_name(dev, selector);
+}
+
+static int msm_pinmux_set(struct udevice *dev, unsigned int pin_selector,
+			  unsigned int func_selector)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	clrsetbits_le32(priv->base + GPIO_CONFIG_OFFSET(pin_selector),
+			TLMM_FUNC_SEL_MASK | TLMM_GPIO_DISABLE,
+			priv->data->get_function_mux(func_selector) << 2);
+	return 0;
+}
+
+static int msm_pinconf_set(struct udevice *dev, unsigned int pin_selector,
+			   unsigned int param, unsigned int argument)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	switch (param) {
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		clrsetbits_le32(priv->base + GPIO_CONFIG_OFFSET(pin_selector),
+				TLMM_DRV_STRENGTH_MASK, argument << 6);
+		break;
+	case PIN_CONFIG_BIAS_DISABLE:
+		clrbits_le32(priv->base + GPIO_CONFIG_OFFSET(pin_selector),
+			     TLMM_GPIO_PULL_MASK);
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		clrsetbits_le32(priv->base + GPIO_CONFIG_OFFSET(pin_selector),
+			     TLMM_GPIO_PULL_MASK, argument);
+		break;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+static struct pinctrl_ops msm_pinctrl_ops = {
+	.get_pins_count = msm_get_pins_count,
+	.get_pin_name = msm_get_pin_name,
+	.set_state = pinctrl_generic_set_state,
+	.pinmux_set = msm_pinmux_set,
+	.pinconf_num_params = ARRAY_SIZE(msm_conf_params),
+	.pinconf_params = msm_conf_params,
+	.pinconf_set = msm_pinconf_set,
+	.get_functions_count = msm_get_functions_count,
+	.get_function_name = msm_get_function_name,
+};
+
+static const struct udevice_id msm_pinctrl_ids[] = {
+	{ .compatible = "qcom,tlmm-ipq4019", .data = (ulong)&ipq4019_data },
+	{ }
+};
+
+U_BOOT_DRIVER(pinctrl_snapdraon) = {
+	.name		= "pinctrl_msm",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= msm_pinctrl_ids,
+	.priv_auto	= sizeof(struct msm_pinctrl_priv),
+	.ops		= &msm_pinctrl_ops,
+	.probe		= msm_pinctrl_probe,
+};
diff --git a/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-snapdragon.h b/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-snapdragon.h
new file mode 100644
index 000000000..2341a7134
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-ipq40xx/pinctrl-snapdragon.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Qualcomm Pin control
+ *
+ * (C) Copyright 2018 Ramon Fried <ramon.fried@gmail.com>
+ *
+ */
+#ifndef _PINCTRL_SNAPDRAGON_H
+#define _PINCTRL_SNAPDRAGON_H
+
+#include <common.h>
+
+struct msm_pinctrl_data {
+	int pin_count;
+	int functions_count;
+	const char *(*get_function_name)(struct udevice *dev,
+					 unsigned int selector);
+	unsigned int (*get_function_mux)(unsigned int selector);
+	const char *(*get_pin_name)(struct udevice *dev,
+				    unsigned int selector);
+};
+
+struct pinctrl_function {
+	const char *name;
+	int val;
+};
+
+extern struct msm_pinctrl_data ipq4019_data;
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/Kconfig b/roms/u-boot/arch/arm/mach-k3/Kconfig
new file mode 100644
index 000000000..bfbce44bf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/Kconfig
@@ -0,0 +1,153 @@
+if ARCH_K3
+
+choice
+	prompt "Texas Instruments' K3 based SoC select"
+	optional
+
+config SOC_K3_AM6
+	bool "TI's K3 based AM6 SoC Family Support"
+
+config SOC_K3_J721E
+	bool "TI's K3 based J721E SoC Family Support"
+
+config SOC_K3_AM642
+	bool "TI's K3 based AM642 SoC Family Support"
+
+endchoice
+
+config SYS_SOC
+	default "k3"
+
+config SYS_K3_NON_SECURE_MSRAM_SIZE
+	hex
+	default 0x80000 if SOC_K3_AM6
+	default 0x100000 if SOC_K3_J721E
+	default 0x1c0000 if SOC_K3_AM642
+	help
+	  Describes the total size of the MCU or OCMC MSRAM present on
+	  the SoC in use. This doesn't specify the total size of SPL as
+	  ROM can use some part of this RAM. Once ROM gives control to
+	  SPL then this complete size can be usable.
+
+config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
+	hex
+	default 0x58000 if SOC_K3_AM6
+	default 0xc0000 if SOC_K3_J721E
+	default 0x180000 if SOC_K3_AM642
+	help
+	  Describes the maximum size of the image that ROM can download
+	  from any boot media.
+
+config SYS_K3_MCU_SCRATCHPAD_BASE
+	hex
+	default 0x40280000 if SOC_K3_AM6
+	default 0x40280000 if SOC_K3_J721E
+	help
+	  Describes the base address of MCU Scratchpad RAM.
+
+config SYS_K3_MCU_SCRATCHPAD_SIZE
+	hex
+	default 0x200 if SOC_K3_AM6
+	default 0x200 if SOC_K3_J721E
+	help
+	  Describes the size of MCU Scratchpad RAM.
+
+config SYS_K3_BOOT_PARAM_TABLE_INDEX
+	hex
+	default 0x41c7fbfc if SOC_K3_AM6
+	default 0x41cffbfc if SOC_K3_J721E
+	default 0x701bebfc if SOC_K3_AM642
+	help
+	  Address at which ROM stores the value which determines if SPL
+	  is booted up by primary boot media or secondary boot media.
+
+config SYS_K3_KEY
+	string "Key used to generate x509 certificate"
+	help
+	  This option enables to provide a custom key that can be used for
+	  generating x509 certificate for spl binary. If not needed leave
+	  it blank so that a random key is generated and used.
+
+config SYS_K3_BOOT_CORE_ID
+	int
+	default 16
+
+config K3_EARLY_CONS
+	bool "Activate to allow for an early console during SPL"
+	depends on SPL
+	help
+	  Turn this option on to enable an early console functionality in SPL
+	  before the main console is being brought up. This can be useful in
+	  situations where the main console is dependent on System Firmware
+	  (SYSFW) being up and running, which is usually not the case during
+	  the very early stages of boot. Using this early console functionality
+	  will allow for an alternate serial port to be used to support things
+	  like UART-based boot and early diagnostic messages until the main
+	  console is ready to get activated.
+
+config K3_EARLY_CONS_IDX
+	depends on K3_EARLY_CONS
+	int "Index of serial device to use for SPL early console"
+	default 1
+	help
+	  Use this option to set the index of the serial device to be used
+	  for the early console during SPL execution.
+
+config K3_LOAD_SYSFW
+	bool
+	depends on SPL
+
+config K3_SYSFW_IMAGE_NAME
+	string "File name of SYSFW firmware and configuration blob"
+	depends on K3_LOAD_SYSFW
+	default	"sysfw.itb"
+	help
+	  Filename of the combined System Firmware and configuration image tree
+	  blob to be loaded when booting from a filesystem.
+
+config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT
+	hex "MMC sector to load SYSFW firmware and configuration blob from"
+	depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+	default 0x3600
+	help
+	  Address on the MMC to load the combined System Firmware and
+	  configuration image tree blob from, when the MMC is being used
+	  in raw mode. Units: MMC sectors (1 sector = 512 bytes).
+
+config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
+	hex "MMC partition to load SYSFW firmware and configuration blob from"
+	depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+	default 2
+	help
+	  Partition on the MMC to the combined System Firmware and configuration
+	  image tree blob from, when the MMC is being used in raw mode.
+
+config K3_SYSFW_IMAGE_SIZE_MAX
+	int "Amount of memory dynamically allocated for loading SYSFW blob"
+	depends on K3_LOAD_SYSFW
+	default	278000
+	help
+	  Amount of memory (in bytes) reserved through dynamic allocation at
+	  runtime for loading the combined System Firmware and configuration image
+	  tree blob. Keep it as tight as possible, as this directly affects the
+	  overall SPL memory footprint.
+
+config K3_SYSFW_IMAGE_SPI_OFFS
+	hex "SPI offset of SYSFW firmware and configuration blob"
+	depends on K3_LOAD_SYSFW
+	default	0x6C0000
+	help
+	  Offset of the combined System Firmware and configuration image tree
+	  blob to be loaded when booting from a SPI flash memory.
+
+config SYS_K3_SPL_ATF
+	bool "Start Cortex-A from SPL"
+	depends on SPL && CPU_V7R
+	help
+	  Enabling this will try to start Cortex-A (typically with ATF)
+	  after SPL from R5.
+
+source "board/ti/am65x/Kconfig"
+source "board/ti/am64x/Kconfig"
+source "board/ti/j721e/Kconfig"
+endif
diff --git a/roms/u-boot/arch/arm/mach-k3/Makefile b/roms/u-boot/arch/arm/mach-k3/Makefile
new file mode 100644
index 000000000..890d1498d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
+#	Lokesh Vutla <lokeshvutla@ti.com>
+
+obj-$(CONFIG_SOC_K3_AM6) += am6_init.o
+obj-$(CONFIG_SOC_K3_J721E) += j721e_init.o
+obj-$(CONFIG_SOC_K3_AM642) += am642_init.o
+obj-$(CONFIG_ARM64) += arm64-mmu.o
+obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o
+obj-$(CONFIG_TI_SECURE_DEVICE) += security.o
+obj-$(CONFIG_ARM64) += cache.o
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_K3_LOAD_SYSFW) += sysfw-loader.o
+endif
+obj-y += common.o
diff --git a/roms/u-boot/arch/arm/mach-k3/am642_init.c b/roms/u-boot/arch/arm/mach-k3/am642_init.c
new file mode 100644
index 000000000..a433702b4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/am642_init.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM642: SoC specific initialization
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ *	Keerthy <j-keerthy@ti.com>
+ *	Dave Gerlach <d-gerlach@ti.com>
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sysfw-loader.h>
+#include <asm/arch/sys_proto.h>
+#include "common.h"
+#include <asm/arch/sys_proto.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <dm/pinctrl.h>
+#include <mmc.h>
+#include <dm/root.h>
+
+#if defined(CONFIG_SPL_BUILD)
+
+static void ctrl_mmr_unlock(void)
+{
+	/* Unlock all PADCFG_MMR1 module registers */
+	mmr_unlock(PADCFG_MMR1_BASE, 1);
+
+	/* Unlock all CTRL_MMR0 module registers */
+	mmr_unlock(CTRL_MMR0_BASE, 0);
+	mmr_unlock(CTRL_MMR0_BASE, 1);
+	mmr_unlock(CTRL_MMR0_BASE, 2);
+	mmr_unlock(CTRL_MMR0_BASE, 3);
+	mmr_unlock(CTRL_MMR0_BASE, 5);
+	mmr_unlock(CTRL_MMR0_BASE, 6);
+}
+
+/*
+ * This uninitialized global variable would normal end up in the .bss section,
+ * but the .bss is cleared between writing and reading this variable, so move
+ * it to the .data section.
+ */
+u32 bootindex __section(".data");
+static struct rom_extended_boot_data bootdata __section(".data");
+
+static void store_boot_info_from_rom(void)
+{
+	bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
+	memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
+	       sizeof(struct rom_extended_boot_data));
+}
+
+#if defined(CONFIG_K3_LOAD_SYSFW) && CONFIG_IS_ENABLED(DM_MMC)
+void k3_mmc_stop_clock(void)
+{
+	if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+		struct mmc *mmc = find_mmc_device(0);
+
+		if (!mmc)
+			return;
+
+		mmc->saved_clock = mmc->clock;
+		mmc_set_clock(mmc, 0, true);
+	}
+}
+
+void k3_mmc_restart_clock(void)
+{
+	if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+		struct mmc *mmc = find_mmc_device(0);
+
+		if (!mmc)
+			return;
+
+		mmc_set_clock(mmc, mmc->saved_clock, false);
+	}
+}
+#else
+void k3_mmc_stop_clock(void) {}
+void k3_mmc_restart_clock(void) {}
+#endif
+
+#ifdef CONFIG_SPL_OF_LIST
+void do_dt_magic(void)
+{
+	int ret, rescan;
+
+	if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+		do_board_detect();
+
+	/*
+	 * Board detection has been done.
+	 * Let us see if another dtb wouldn't be a better match
+	 * for our board
+	 */
+	if (IS_ENABLED(CONFIG_CPU_V7R)) {
+		ret = fdtdec_resetup(&rescan);
+		if (!ret && rescan) {
+			dm_uninit();
+			dm_init_and_scan(true);
+		}
+	}
+}
+#endif
+
+void board_init_f(ulong dummy)
+{
+#if defined(CONFIG_K3_LOAD_SYSFW)
+	struct udevice *dev;
+	int ret;
+#endif
+
+#if defined(CONFIG_CPU_V7R)
+	setup_k3_mpu_regions();
+#endif
+
+	/*
+	 * Cannot delay this further as there is a chance that
+	 * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
+	 */
+	store_boot_info_from_rom();
+
+	ctrl_mmr_unlock();
+
+	/* Init DM early */
+	spl_early_init();
+
+	preloader_console_init();
+
+	do_dt_magic();
+
+#if defined(CONFIG_K3_LOAD_SYSFW)
+	/*
+	 * Process pinctrl for serial3 a.k.a. MAIN UART1 module and continue
+	 * regardless of the result of pinctrl. Do this without probing the
+	 * device, but instead by searching the device that would request the
+	 * given sequence number if probed. The UART will be used by the system
+	 * firmware (SYSFW) image for various purposes and SYSFW depends on us
+	 * to initialize its pin settings.
+	 */
+	ret = uclass_find_device_by_seq(UCLASS_SERIAL, 3, &dev);
+	if (!ret)
+		pinctrl_select_state(dev, "default");
+
+	/*
+	 * Load, start up, and configure system controller firmware.
+	 * This will determine whether or not ROM has already loaded
+	 * system firmware and if so, will only perform needed config
+	 * and not attempt to load firmware again.
+	 */
+	k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata), k3_mmc_stop_clock,
+			k3_mmc_restart_clock);
+#endif
+
+	/* Output System Firmware version info */
+	k3_sysfw_print_ver();
+
+#if defined(CONFIG_K3_AM64_DDRSS)
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret)
+		panic("DRAM init failed: %d\n", ret);
+#endif
+}
+
+u32 spl_boot_mode(const u32 boot_device)
+{
+	switch (boot_device) {
+	case BOOT_DEVICE_MMC1:
+		return MMCSD_MODE_EMMCBOOT;
+
+	case BOOT_DEVICE_MMC2:
+		return MMCSD_MODE_FS;
+
+	default:
+		return MMCSD_MODE_RAW;
+	}
+}
+
+static u32 __get_backup_bootmedia(u32 main_devstat)
+{
+	u32 bkup_bootmode =
+	    (main_devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK) >>
+	    MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT;
+	u32 bkup_bootmode_cfg =
+	    (main_devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK) >>
+	    MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT;
+
+	switch (bkup_bootmode) {
+	case BACKUP_BOOT_DEVICE_UART:
+		return BOOT_DEVICE_UART;
+
+	case BACKUP_BOOT_DEVICE_USB:
+		return BOOT_DEVICE_USB;
+
+	case BACKUP_BOOT_DEVICE_ETHERNET:
+		return BOOT_DEVICE_ETHERNET;
+
+	case BACKUP_BOOT_DEVICE_MMC:
+		if (bkup_bootmode_cfg)
+			return BOOT_DEVICE_MMC2;
+		return BOOT_DEVICE_MMC1;
+
+	case BACKUP_BOOT_DEVICE_SPI:
+		return BOOT_DEVICE_SPI;
+
+	case BACKUP_BOOT_DEVICE_I2C:
+		return BOOT_DEVICE_I2C;
+	};
+
+	return BOOT_DEVICE_RAM;
+}
+
+static u32 __get_primary_bootmedia(u32 main_devstat)
+{
+	u32 bootmode = (main_devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
+	    MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
+	u32 bootmode_cfg =
+	    (main_devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK) >>
+	    MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT;
+
+	switch (bootmode) {
+	case BOOT_DEVICE_OSPI:
+		fallthrough;
+	case BOOT_DEVICE_QSPI:
+		fallthrough;
+	case BOOT_DEVICE_XSPI:
+		fallthrough;
+	case BOOT_DEVICE_SPI:
+		return BOOT_DEVICE_SPI;
+
+	case BOOT_DEVICE_ETHERNET_RGMII:
+		fallthrough;
+	case BOOT_DEVICE_ETHERNET_RMII:
+		return BOOT_DEVICE_ETHERNET;
+
+	case BOOT_DEVICE_EMMC:
+		return BOOT_DEVICE_MMC1;
+
+	case BOOT_DEVICE_MMC:
+		if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK) >>
+		     MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT)
+			return BOOT_DEVICE_MMC2;
+		return BOOT_DEVICE_MMC1;
+
+	case BOOT_DEVICE_NOBOOT:
+		return BOOT_DEVICE_RAM;
+	}
+
+	return bootmode;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+
+	if (bootindex == K3_PRIMARY_BOOTMODE)
+		return __get_primary_bootmedia(devstat);
+	else
+		return __get_backup_bootmedia(devstat);
+}
+#endif
+
+#if defined(CONFIG_SYS_K3_SPL_ATF)
+
+#define AM64X_DEV_RTI8			127
+#define AM64X_DEV_RTI9			128
+#define AM64X_DEV_R5FSS0_CORE0		121
+#define AM64X_DEV_R5FSS0_CORE1		122
+
+void release_resources_for_core_shutdown(void)
+{
+	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+	struct ti_sci_dev_ops *dev_ops = &ti_sci->ops.dev_ops;
+	struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;
+	int ret;
+	u32 i;
+
+	const u32 put_device_ids[] = {
+		AM64X_DEV_RTI9,
+		AM64X_DEV_RTI8,
+	};
+
+	/* Iterate through list of devices to put (shutdown) */
+	for (i = 0; i < ARRAY_SIZE(put_device_ids); i++) {
+		u32 id = put_device_ids[i];
+
+		ret = dev_ops->put_device(ti_sci, id);
+		if (ret)
+			panic("Failed to put device %u (%d)\n", id, ret);
+	}
+
+	const u32 put_core_ids[] = {
+		AM64X_DEV_R5FSS0_CORE1,
+		AM64X_DEV_R5FSS0_CORE0, /* Handle CPU0 after CPU1 */
+	};
+
+	/* Iterate through list of cores to put (shutdown) */
+	for (i = 0; i < ARRAY_SIZE(put_core_ids); i++) {
+		u32 id = put_core_ids[i];
+
+		/*
+		 * Queue up the core shutdown request. Note that this call
+		 * needs to be followed up by an actual invocation of an WFE
+		 * or WFI CPU instruction.
+		 */
+		ret = proc_ops->proc_shutdown_no_wait(ti_sci, id);
+		if (ret)
+			panic("Failed sending core %u shutdown message (%d)\n",
+			      id, ret);
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/am6_init.c b/roms/u-boot/arch/arm/mach-k3/am6_init.c
new file mode 100644
index 000000000..425b3f93c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/am6_init.c
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AM6: SoC specific initialization
+ *
+ * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <spl.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sysfw-loader.h>
+#include <asm/arch/sys_proto.h>
+#include "common.h"
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <dm/pinctrl.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <log.h>
+#include <mmc.h>
+#include <stdlib.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_K3_LOAD_SYSFW
+#ifdef CONFIG_TI_SECURE_DEVICE
+struct fwl_data main_cbass_fwls[] = {
+	{ "MMCSD1_CFG", 2057, 1 },
+	{ "MMCSD0_CFG", 2058, 1 },
+	{ "USB3SS0_SLV0", 2176, 2 },
+	{ "PCIE0_SLV", 2336, 8 },
+	{ "PCIE1_SLV", 2337, 8 },
+	{ "PCIE0_CFG", 2688, 1 },
+	{ "PCIE1_CFG", 2689, 1 },
+}, mcu_cbass_fwls[] = {
+	{ "MCU_ARMSS0_CORE0_SLV", 1024, 1 },
+	{ "MCU_ARMSS0_CORE1_SLV", 1028, 1 },
+	{ "MCU_FSS0_S1", 1033, 8 },
+	{ "MCU_FSS0_S0", 1036, 8 },
+	{ "MCU_CPSW0", 1220, 1 },
+};
+#endif
+#endif
+
+static void ctrl_mmr_unlock(void)
+{
+	/* Unlock all WKUP_CTRL_MMR0 module registers */
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 0);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 1);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 2);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 3);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 6);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 7);
+
+	/* Unlock all MCU_CTRL_MMR0 module registers */
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 0);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 1);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 2);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 6);
+
+	/* Unlock all CTRL_MMR0 module registers */
+	mmr_unlock(CTRL_MMR0_BASE, 0);
+	mmr_unlock(CTRL_MMR0_BASE, 1);
+	mmr_unlock(CTRL_MMR0_BASE, 2);
+	mmr_unlock(CTRL_MMR0_BASE, 3);
+	mmr_unlock(CTRL_MMR0_BASE, 6);
+	mmr_unlock(CTRL_MMR0_BASE, 7);
+}
+
+/*
+ * This uninitialized global variable would normal end up in the .bss section,
+ * but the .bss is cleared between writing and reading this variable, so move
+ * it to the .data section.
+ */
+u32 bootindex __section(".data");
+
+static void store_boot_index_from_rom(void)
+{
+	bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
+}
+
+#if defined(CONFIG_K3_LOAD_SYSFW) && CONFIG_IS_ENABLED(DM_MMC)
+void k3_mmc_stop_clock(void)
+{
+	if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+		struct mmc *mmc = find_mmc_device(0);
+
+		if (!mmc)
+			return;
+
+		mmc->saved_clock = mmc->clock;
+		mmc_set_clock(mmc, 0, true);
+	}
+}
+
+void k3_mmc_restart_clock(void)
+{
+	if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+		struct mmc *mmc = find_mmc_device(0);
+
+		if (!mmc)
+			return;
+
+		mmc_set_clock(mmc, mmc->saved_clock, false);
+	}
+}
+#else
+void k3_mmc_stop_clock(void) {}
+void k3_mmc_restart_clock(void) {}
+#endif
+#if CONFIG_IS_ENABLED(DFU) || CONFIG_IS_ENABLED(USB_STORAGE)
+#define CTRLMMR_SERDES0_CTRL	0x00104080
+#define PCIE_LANE0		0x1
+static int fixup_usb_boot(void)
+{
+	int ret;
+
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_USB:
+		/*
+		 * If bootmode is Host bootmode, fixup the dr_mode to host
+		 * before the dwc3 bind takes place
+		 */
+		ret = fdt_find_and_setprop((void *)gd->fdt_blob,
+				"/interconnect@100000/dwc3@4000000/usb@10000",
+				"dr_mode", "host", 11, 0);
+		if (ret)
+			printf("%s: fdt_find_and_setprop() failed:%d\n", __func__,
+			       ret);
+		fallthrough;
+	case BOOT_DEVICE_DFU:
+		/*
+		 * The serdes mux between PCIe and USB3 needs to be set to PCIe for
+		 * accessing the interface at USB 2.0
+		 */
+		writel(PCIE_LANE0, CTRLMMR_SERDES0_CTRL);
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+int fdtdec_board_setup(const void *fdt_blob)
+{
+	return fixup_usb_boot();
+}
+#endif
+void board_init_f(ulong dummy)
+{
+#if defined(CONFIG_K3_LOAD_SYSFW) || defined(CONFIG_K3_AM654_DDRSS)
+	struct udevice *dev;
+	size_t pool_size;
+	void *pool_addr;
+	int ret;
+#endif
+	/*
+	 * Cannot delay this further as there is a chance that
+	 * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
+	 */
+	store_boot_index_from_rom();
+
+	/* Make all control module registers accessible */
+	ctrl_mmr_unlock();
+
+#ifdef CONFIG_CPU_V7R
+	disable_linefill_optimization();
+	setup_k3_mpu_regions();
+#endif
+
+	/* Init DM early in-order to invoke system controller */
+	spl_early_init();
+
+#ifdef CONFIG_K3_EARLY_CONS
+	/*
+	 * Allow establishing an early console as required for example when
+	 * doing a UART-based boot. Note that this console may not "survive"
+	 * through a SYSFW PM-init step and will need a re-init in some way
+	 * due to changing module clock frequencies.
+	 */
+	early_console_init();
+#endif
+
+#ifdef CONFIG_K3_LOAD_SYSFW
+	/*
+	 * Initialize an early full malloc environment. Do so by allocating a
+	 * new malloc area inside the currently active pre-relocation "first"
+	 * malloc pool of which we use all that's left.
+	 */
+	pool_size = CONFIG_VAL(SYS_MALLOC_F_LEN) - gd->malloc_ptr;
+	pool_addr = malloc(pool_size);
+	if (!pool_addr)
+		panic("ERROR: Can't allocate full malloc pool!\n");
+
+	mem_malloc_init((ulong)pool_addr, (ulong)pool_size);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
+	debug("%s: initialized an early full malloc pool at 0x%08lx of 0x%lx bytes\n",
+	      __func__, (unsigned long)pool_addr, (unsigned long)pool_size);
+	/*
+	 * Process pinctrl for the serial0 a.k.a. WKUP_UART0 module and continue
+	 * regardless of the result of pinctrl. Do this without probing the
+	 * device, but instead by searching the device that would request the
+	 * given sequence number if probed. The UART will be used by the system
+	 * firmware (SYSFW) image for various purposes and SYSFW depends on us
+	 * to initialize its pin settings.
+	 */
+	ret = uclass_find_device_by_seq(UCLASS_SERIAL, 0, &dev);
+	if (!ret)
+		pinctrl_select_state(dev, "default");
+
+	/*
+	 * Load, start up, and configure system controller firmware while
+	 * also populating the SYSFW post-PM configuration callback hook.
+	 */
+	k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);
+
+	/* Prepare console output */
+	preloader_console_init();
+
+	/* Disable ROM configured firewalls right after loading sysfw */
+#ifdef CONFIG_TI_SECURE_DEVICE
+	remove_fwl_configs(main_cbass_fwls, ARRAY_SIZE(main_cbass_fwls));
+	remove_fwl_configs(mcu_cbass_fwls, ARRAY_SIZE(mcu_cbass_fwls));
+#endif
+#else
+	/* Prepare console output */
+	preloader_console_init();
+#endif
+
+	/* Output System Firmware version info */
+	k3_sysfw_print_ver();
+
+	/* Perform EEPROM-based board detection */
+	do_board_detect();
+
+#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
+	ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs),
+					  &dev);
+	if (ret)
+		printf("AVS init failed: %d\n", ret);
+#endif
+
+#ifdef CONFIG_K3_AM654_DDRSS
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret)
+		panic("DRAM init failed: %d\n", ret);
+#endif
+	spl_enable_dcache();
+}
+
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+#if defined(CONFIG_SUPPORT_EMMC_BOOT)
+	u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+
+	u32 bootmode = (devstat & CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK) >>
+			CTRLMMR_MAIN_DEVSTAT_BOOTMODE_SHIFT;
+
+	/* eMMC boot0 mode is only supported for primary boot */
+	if (bootindex == K3_PRIMARY_BOOTMODE &&
+	    bootmode == BOOT_DEVICE_MMC1)
+		return MMCSD_MODE_EMMCBOOT;
+#endif
+
+	/* Everything else use filesystem if available */
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
+	return MMCSD_MODE_FS;
+#else
+	return MMCSD_MODE_RAW;
+#endif
+}
+
+static u32 __get_backup_bootmedia(u32 devstat)
+{
+	u32 bkup_boot = (devstat & CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_MASK) >>
+			CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT;
+
+	switch (bkup_boot) {
+	case BACKUP_BOOT_DEVICE_USB:
+		return BOOT_DEVICE_USB;
+	case BACKUP_BOOT_DEVICE_UART:
+		return BOOT_DEVICE_UART;
+	case BACKUP_BOOT_DEVICE_ETHERNET:
+		return BOOT_DEVICE_ETHERNET;
+	case BACKUP_BOOT_DEVICE_MMC2:
+	{
+		u32 port = (devstat & CTRLMMR_MAIN_DEVSTAT_BKUP_MMC_PORT_MASK) >>
+			    CTRLMMR_MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT;
+		if (port == 0x0)
+			return BOOT_DEVICE_MMC1;
+		return BOOT_DEVICE_MMC2;
+	}
+	case BACKUP_BOOT_DEVICE_SPI:
+		return BOOT_DEVICE_SPI;
+	case BACKUP_BOOT_DEVICE_HYPERFLASH:
+		return BOOT_DEVICE_HYPERFLASH;
+	case BACKUP_BOOT_DEVICE_I2C:
+		return BOOT_DEVICE_I2C;
+	};
+
+	return BOOT_DEVICE_RAM;
+}
+
+static u32 __get_primary_bootmedia(u32 devstat)
+{
+	u32 bootmode = (devstat & CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK) >>
+			CTRLMMR_MAIN_DEVSTAT_BOOTMODE_SHIFT;
+
+	if (bootmode == BOOT_DEVICE_OSPI || bootmode ==	BOOT_DEVICE_QSPI)
+		bootmode = BOOT_DEVICE_SPI;
+
+	if (bootmode == BOOT_DEVICE_MMC2) {
+		u32 port = (devstat & CTRLMMR_MAIN_DEVSTAT_MMC_PORT_MASK) >>
+			    CTRLMMR_MAIN_DEVSTAT_MMC_PORT_SHIFT;
+		if (port == 0x0)
+			bootmode = BOOT_DEVICE_MMC1;
+	} else if (bootmode == BOOT_DEVICE_MMC1) {
+		u32 port = (devstat & CTRLMMR_MAIN_DEVSTAT_EMMC_PORT_MASK) >>
+			    CTRLMMR_MAIN_DEVSTAT_EMMC_PORT_SHIFT;
+		if (port == 0x1)
+			bootmode = BOOT_DEVICE_MMC2;
+	} else if (bootmode == BOOT_DEVICE_DFU) {
+		u32 mode = (devstat & CTRLMMR_MAIN_DEVSTAT_USB_MODE_MASK) >>
+			    CTRLMMR_MAIN_DEVSTAT_USB_MODE_SHIFT;
+		if (mode == 0x2)
+			bootmode = BOOT_DEVICE_USB;
+	}
+
+	return bootmode;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+
+	if (bootindex == K3_PRIMARY_BOOTMODE)
+		return __get_primary_bootmedia(devstat);
+	else
+		return __get_backup_bootmedia(devstat);
+}
+#endif
+
+#ifdef CONFIG_SYS_K3_SPL_ATF
+
+#define AM6_DEV_MCU_RTI0			134
+#define AM6_DEV_MCU_RTI1			135
+#define AM6_DEV_MCU_ARMSS0_CPU0			159
+#define AM6_DEV_MCU_ARMSS0_CPU1			245
+
+void release_resources_for_core_shutdown(void)
+{
+	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+	struct ti_sci_dev_ops *dev_ops = &ti_sci->ops.dev_ops;
+	struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;
+	int ret;
+	u32 i;
+
+	const u32 put_device_ids[] = {
+		AM6_DEV_MCU_RTI0,
+		AM6_DEV_MCU_RTI1,
+	};
+
+	/* Iterate through list of devices to put (shutdown) */
+	for (i = 0; i < ARRAY_SIZE(put_device_ids); i++) {
+		u32 id = put_device_ids[i];
+
+		ret = dev_ops->put_device(ti_sci, id);
+		if (ret)
+			panic("Failed to put device %u (%d)\n", id, ret);
+	}
+
+	const u32 put_core_ids[] = {
+		AM6_DEV_MCU_ARMSS0_CPU1,
+		AM6_DEV_MCU_ARMSS0_CPU0,	/* Handle CPU0 after CPU1 */
+	};
+
+	/* Iterate through list of cores to put (shutdown) */
+	for (i = 0; i < ARRAY_SIZE(put_core_ids); i++) {
+		u32 id = put_core_ids[i];
+
+		/*
+		 * Queue up the core shutdown request. Note that this call
+		 * needs to be followed up by an actual invocation of an WFE
+		 * or WFI CPU instruction.
+		 */
+		ret = proc_ops->proc_shutdown_no_wait(ti_sci, id);
+		if (ret)
+			panic("Failed sending core %u shutdown message (%d)\n",
+			      id, ret);
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/arm64-mmu.c b/roms/u-boot/arch/arm/mach-k3/arm64-mmu.c
new file mode 100644
index 000000000..94242e1e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/arm64-mmu.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier:     GPL-2.0+
+/*
+ * K3: ARM64 MMU setup
+ *
+ * Copyright (C) 2018-2020 Texas Instruments Incorporated - https://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ *	Suman Anna <s-anna@ti.com>
+ * (This file is derived from arch/arm/mach-zynqmp/cpu.c)
+ *
+ */
+
+#include <common.h>
+#include <asm/system.h>
+#include <asm/armv8/mmu.h>
+
+#ifdef CONFIG_SOC_K3_AM6
+/* NR_DRAM_BANKS + 32bit IO + 64bit IO + terminator */
+#define NR_MMU_REGIONS	(CONFIG_NR_DRAM_BANKS + 5)
+
+/* ToDo: Add 64bit IO */
+struct mm_region am654_mem_map[NR_MMU_REGIONS] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xa0000000UL,
+		.phys = 0xa0000000UL,
+		.size = 0x02100000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xa2100000UL,
+		.phys = 0xa2100000UL,
+		.size = 0x5df00000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x880000000UL,
+		.phys = 0x880000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x500000000UL,
+		.phys = 0x500000000UL,
+		.size = 0x400000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = am654_mem_map;
+#endif /* CONFIG_SOC_K3_AM6 */
+
+#ifdef CONFIG_SOC_K3_J721E
+
+#ifdef CONFIG_TARGET_J721E_A72_EVM
+/* NR_DRAM_BANKS + 32bit IO + 64bit IO + terminator */
+#define NR_MMU_REGIONS	(CONFIG_NR_DRAM_BANKS + 6)
+
+/* ToDo: Add 64bit IO */
+struct mm_region j721e_mem_map[NR_MMU_REGIONS] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xa0000000UL,
+		.phys = 0xa0000000UL,
+		.size = 0x1bc00000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		.virt = 0xbbc00000UL,
+		.phys = 0xbbc00000UL,
+		.size = 0x44400000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x880000000UL,
+		.phys = 0x880000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x500000000UL,
+		.phys = 0x500000000UL,
+		.size = 0x400000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x4d80000000UL,
+		.phys = 0x4d80000000UL,
+		.size = 0x0002000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = j721e_mem_map;
+#endif /* CONFIG_TARGET_J721E_A72_EVM */
+
+#ifdef CONFIG_TARGET_J7200_A72_EVM
+#define NR_MMU_REGIONS	(CONFIG_NR_DRAM_BANKS + 5)
+
+/* ToDo: Add 64bit IO */
+struct mm_region j7200_mem_map[NR_MMU_REGIONS] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xa0000000UL,
+		.phys = 0xa0000000UL,
+		.size = 0x04800000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		.virt = 0xa4800000UL,
+		.phys = 0xa4800000UL,
+		.size = 0x5b800000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x880000000UL,
+		.phys = 0x880000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x500000000UL,
+		.phys = 0x500000000UL,
+		.size = 0x400000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = j7200_mem_map;
+#endif /* CONFIG_TARGET_J7200_A72_EVM */
+
+#endif /* CONFIG_SOC_K3_J721E */
+
+#ifdef CONFIG_SOC_K3_AM642
+/* NR_DRAM_BANKS + 32bit IO + 64bit IO + terminator */
+#define NR_MMU_REGIONS	(CONFIG_NR_DRAM_BANKS + 3)
+
+/* ToDo: Add 64bit IO */
+struct mm_region am64_mem_map[NR_MMU_REGIONS] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x880000000UL,
+		.phys = 0x880000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x500000000UL,
+		.phys = 0x500000000UL,
+		.size = 0x400000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = am64_mem_map;
+#endif /* CONFIG_SOC_K3_AM642 */
diff --git a/roms/u-boot/arch/arm/mach-k3/cache.S b/roms/u-boot/arch/arm/mach-k3/cache.S
new file mode 100644
index 000000000..a5717ea20
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/cache.S
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+#if defined(CONFIG_SPL_BUILD)
+ENTRY(__asm_invalidate_l3_dcache)
+	/* Invalidate SPL address range */
+	mov x0, #CONFIG_SPL_TEXT_BASE
+	add x1, x0, #CONFIG_SPL_MAX_SIZE
+	b __asm_flush_dcache_range
+ENDPROC(__asm_invalidate_l3_dcache)
+
+ENTRY(__asm_flush_l3_dcache)
+	/* Flush SPL address range */
+	mov x0, #CONFIG_SPL_TEXT_BASE
+	add x1, x0, #CONFIG_SPL_MAX_SIZE
+	b __asm_flush_dcache_range
+ENDPROC(__asm_flush_l3_dcache)
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/common.c b/roms/u-boot/arch/arm/mach-k3/common.c
new file mode 100644
index 000000000..9191f686f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/common.c
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * K3: Common Architecture initialization
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include "common.h"
+#include <dm.h>
+#include <remoteproc.h>
+#include <asm/cache.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <fdt_support.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <fs_loader.h>
+#include <fs.h>
+#include <env.h>
+#include <elf.h>
+#include <soc.h>
+
+struct ti_sci_handle *get_ti_sci_handle(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_FIRMWARE,
+					  DM_DRIVER_GET(ti_sci), &dev);
+	if (ret)
+		panic("Failed to get SYSFW (%d)\n", ret);
+
+	return (struct ti_sci_handle *)ti_sci_get_handle_from_sysfw(dev);
+}
+
+void k3_sysfw_print_ver(void)
+{
+	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+	char fw_desc[sizeof(ti_sci->version.firmware_description) + 1];
+
+	/*
+	 * Output System Firmware version info. Note that since the
+	 * 'firmware_description' field is not guaranteed to be zero-
+	 * terminated we manually add a \0 terminator if needed. Further
+	 * note that we intentionally no longer rely on the extended
+	 * printf() formatter '%.*s' to not having to require a more
+	 * full-featured printf() implementation.
+	 */
+	strncpy(fw_desc, ti_sci->version.firmware_description,
+		sizeof(ti_sci->version.firmware_description));
+	fw_desc[sizeof(fw_desc) - 1] = '\0';
+
+	printf("SYSFW ABI: %d.%d (firmware rev 0x%04x '%s')\n",
+	       ti_sci->version.abi_major, ti_sci->version.abi_minor,
+	       ti_sci->version.firmware_revision, fw_desc);
+}
+
+void mmr_unlock(phys_addr_t base, u32 partition)
+{
+	/* Translate the base address */
+	phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
+
+	/* Unlock the requested partition if locked using two-step sequence */
+	writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
+	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
+}
+
+bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data)
+{
+	if (strncmp(data->header, K3_ROM_BOOT_HEADER_MAGIC, 7))
+		return false;
+
+	return data->num_components > 1;
+}
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_K3_EARLY_CONS
+int early_console_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	gd->baudrate = CONFIG_BAUDRATE;
+
+	ret = uclass_get_device_by_seq(UCLASS_SERIAL, CONFIG_K3_EARLY_CONS_IDX,
+				       &dev);
+	if (ret) {
+		printf("Error getting serial dev for early console! (%d)\n",
+		       ret);
+		return ret;
+	}
+
+	gd->cur_serial_dev = dev;
+	gd->flags |= GD_FLG_SERIAL_READY;
+	gd->have_console = 1;
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_K3_SPL_ATF
+
+void init_env(void)
+{
+#ifdef CONFIG_SPL_ENV_SUPPORT
+	char *part;
+
+	env_init();
+	env_relocate();
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC2:
+		part = env_get("bootpart");
+		env_set("storage_interface", "mmc");
+		env_set("fw_dev_part", part);
+		break;
+	case BOOT_DEVICE_SPI:
+		env_set("storage_interface", "ubi");
+		env_set("fw_ubi_mtdpart", "UBI");
+		env_set("fw_ubi_volume", "UBI0");
+		break;
+	default:
+		printf("%s from device %u not supported!\n",
+		       __func__, spl_boot_device());
+		return;
+	}
+#endif
+}
+
+#ifdef CONFIG_FS_LOADER
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
+{
+	struct udevice *fsdev;
+	char *name = NULL;
+	int size = 0;
+
+	*loadaddr = 0;
+#ifdef CONFIG_SPL_ENV_SUPPORT
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC2:
+		name = env_get(name_fw);
+		*loadaddr = env_get_hex(name_loadaddr, *loadaddr);
+		break;
+	default:
+		printf("Loading rproc fw image from device %u not supported!\n",
+		       spl_boot_device());
+		return 0;
+	}
+#endif
+	if (!*loadaddr)
+		return 0;
+
+	if (!uclass_get_device(UCLASS_FS_FIRMWARE_LOADER, 0, &fsdev)) {
+		size = request_firmware_into_buf(fsdev, name, (void *)*loadaddr,
+						 0, 0);
+	}
+
+	return size;
+}
+#else
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
+{
+	return 0;
+}
+#endif
+
+__weak void start_non_linux_remote_cores(void)
+{
+}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+	typedef void __noreturn (*image_entry_noargs_t)(void);
+	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+	u32 loadaddr = 0;
+	int ret, size;
+
+	/* Release all the exclusive devices held by SPL before starting ATF */
+	ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci);
+
+	ret = rproc_init();
+	if (ret)
+		panic("rproc failed to be initialized (%d)\n", ret);
+
+	init_env();
+	start_non_linux_remote_cores();
+	size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load",
+			     &loadaddr);
+
+
+	/*
+	 * It is assumed that remoteproc device 1 is the corresponding
+	 * Cortex-A core which runs ATF. Make sure DT reflects the same.
+	 */
+	ret = rproc_load(1, spl_image->entry_point, 0x200);
+	if (ret)
+		panic("%s: ATF failed to load on rproc (%d)\n", __func__, ret);
+
+	/* Add an extra newline to differentiate the ATF logs from SPL */
+	printf("Starting ATF on ARM64 core...\n\n");
+
+	ret = rproc_start(1);
+	if (ret)
+		panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret);
+	if (!(size > 0 && valid_elf_image(loadaddr))) {
+		debug("Shutting down...\n");
+		release_resources_for_core_shutdown();
+
+		while (1)
+			asm volatile("wfe");
+	}
+
+	image_entry_noargs_t image_entry =
+		(image_entry_noargs_t)load_elf_image_phdr(loadaddr);
+
+	image_entry();
+}
+#endif
+
+#if defined(CONFIG_OF_LIBFDT)
+int fdt_fixup_msmc_ram(void *blob, char *parent_path, char *node_name)
+{
+	u64 msmc_start = 0, msmc_end = 0, msmc_size, reg[2];
+	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+	int ret, node, subnode, len, prev_node;
+	u32 range[4], addr, size;
+	const fdt32_t *sub_reg;
+
+	ti_sci->ops.core_ops.query_msmc(ti_sci, &msmc_start, &msmc_end);
+	msmc_size = msmc_end - msmc_start + 1;
+	debug("%s: msmc_start = 0x%llx, msmc_size = 0x%llx\n", __func__,
+	      msmc_start, msmc_size);
+
+	/* find or create "msmc_sram node */
+	ret = fdt_path_offset(blob, parent_path);
+	if (ret < 0)
+		return ret;
+
+	node = fdt_find_or_add_subnode(blob, ret, node_name);
+	if (node < 0)
+		return node;
+
+	ret = fdt_setprop_string(blob, node, "compatible", "mmio-sram");
+	if (ret < 0)
+		return ret;
+
+	reg[0] = cpu_to_fdt64(msmc_start);
+	reg[1] = cpu_to_fdt64(msmc_size);
+	ret = fdt_setprop(blob, node, "reg", reg, sizeof(reg));
+	if (ret < 0)
+		return ret;
+
+	fdt_setprop_cell(blob, node, "#address-cells", 1);
+	fdt_setprop_cell(blob, node, "#size-cells", 1);
+
+	range[0] = 0;
+	range[1] = cpu_to_fdt32(msmc_start >> 32);
+	range[2] = cpu_to_fdt32(msmc_start & 0xffffffff);
+	range[3] = cpu_to_fdt32(msmc_size);
+	ret = fdt_setprop(blob, node, "ranges", range, sizeof(range));
+	if (ret < 0)
+		return ret;
+
+	subnode = fdt_first_subnode(blob, node);
+	prev_node = 0;
+
+	/* Look for invalid subnodes and delete them */
+	while (subnode >= 0) {
+		sub_reg = fdt_getprop(blob, subnode, "reg", &len);
+		addr = fdt_read_number(sub_reg, 1);
+		sub_reg++;
+		size = fdt_read_number(sub_reg, 1);
+		debug("%s: subnode = %d, addr = 0x%x. size = 0x%x\n", __func__,
+		      subnode, addr, size);
+		if (addr + size > msmc_size ||
+		    !strncmp(fdt_get_name(blob, subnode, &len), "sysfw", 5) ||
+		    !strncmp(fdt_get_name(blob, subnode, &len), "l3cache", 7)) {
+			fdt_del_node(blob, subnode);
+			debug("%s: deleting subnode %d\n", __func__, subnode);
+			if (!prev_node)
+				subnode = fdt_first_subnode(blob, node);
+			else
+				subnode = fdt_next_subnode(blob, prev_node);
+		} else {
+			prev_node = subnode;
+			subnode = fdt_next_subnode(blob, prev_node);
+		}
+	}
+
+	return 0;
+}
+
+int fdt_disable_node(void *blob, char *node_path)
+{
+	int offs;
+	int ret;
+
+	offs = fdt_path_offset(blob, node_path);
+	if (offs < 0) {
+		printf("Node %s not found.\n", node_path);
+		return offs;
+	}
+	ret = fdt_setprop_string(blob, offs, "status", "disabled");
+	if (ret < 0) {
+		printf("Could not add status property to node %s: %s\n",
+		       node_path, fdt_strerror(ret));
+		return ret;
+	}
+	return 0;
+}
+
+#endif
+
+#ifndef CONFIG_SYSRESET
+void reset_cpu(void)
+{
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	struct udevice *soc;
+	char name[64];
+	int ret;
+
+	printf("SoC:   ");
+
+	ret = soc_get(&soc);
+	if (ret) {
+		printf("UNKNOWN\n");
+		return 0;
+	}
+
+	ret = soc_get_family(soc, name, 64);
+	if (!ret) {
+		printf("%s ", name);
+	}
+
+	ret = soc_get_revision(soc, name, 64);
+	if (!ret) {
+		printf("%s\n", name);
+	}
+
+	return 0;
+}
+#endif
+
+bool soc_is_j721e(void)
+{
+	u32 soc;
+
+	soc = (readl(CTRLMMR_WKUP_JTAG_ID) &
+		JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT;
+
+	return soc == J721E;
+}
+
+bool soc_is_j7200(void)
+{
+	u32 soc;
+
+	soc = (readl(CTRLMMR_WKUP_JTAG_ID) &
+		JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT;
+
+	return soc == J7200;
+}
+
+#ifdef CONFIG_ARM64
+void board_prep_linux(bootm_headers_t *images)
+{
+	debug("Linux kernel Image start = 0x%lx end = 0x%lx\n",
+	      images->os.start, images->os.end);
+	__asm_flush_dcache_range(images->os.start,
+				 ROUND(images->os.end,
+				       CONFIG_SYS_CACHELINE_SIZE));
+}
+#endif
+
+#ifdef CONFIG_CPU_V7R
+void disable_linefill_optimization(void)
+{
+	u32 actlr;
+
+	/*
+	 * On K3 devices there are 2 conditions where R5F can deadlock:
+	 * 1.When software is performing series of store operations to
+	 *   cacheable write back/write allocate memory region and later
+	 *   on software execute barrier operation (DSB or DMB). R5F may
+	 *   hang at the barrier instruction.
+	 * 2.When software is performing a mix of load and store operations
+	 *   within a tight loop and store operations are all writing to
+	 *   cacheable write back/write allocates memory regions, R5F may
+	 *   hang at one of the load instruction.
+	 *
+	 * To avoid the above two conditions disable linefill optimization
+	 * inside Cortex R5F.
+	 */
+	asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (actlr));
+	actlr |= (1 << 13); /* Set DLFO bit  */
+	asm("mcr p15, 0, %0, c1, c0, 1" : : "r" (actlr));
+}
+#endif
+
+void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size)
+{
+	struct ti_sci_msg_fwl_region region;
+	struct ti_sci_fwl_ops *fwl_ops;
+	struct ti_sci_handle *ti_sci;
+	size_t i, j;
+
+	ti_sci = get_ti_sci_handle();
+	fwl_ops = &ti_sci->ops.fwl_ops;
+	for (i = 0; i < fwl_data_size; i++) {
+		for (j = 0; j <  fwl_data[i].regions; j++) {
+			region.fwl_id = fwl_data[i].fwl_id;
+			region.region = j;
+			region.n_permission_regs = 3;
+
+			fwl_ops->get_fwl_region(ti_sci, &region);
+
+			if (region.control != 0) {
+				pr_debug("Attempting to disable firewall %5d (%25s)\n",
+					 region.fwl_id, fwl_data[i].name);
+				region.control = 0;
+
+				if (fwl_ops->set_fwl_region(ti_sci, &region))
+					pr_err("Could not disable firewall %5d (%25s)\n",
+					       region.fwl_id, fwl_data[i].name);
+			}
+		}
+	}
+}
+
+void spl_enable_dcache(void)
+{
+#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
+	phys_addr_t ram_top = CONFIG_SYS_SDRAM_BASE;
+
+	dram_init_banksize();
+
+	/* reserve TLB table */
+	gd->arch.tlb_size = PGTABLE_SIZE;
+
+	ram_top += get_effective_memsize();
+	/* keep ram_top in the 32-bit address space */
+	if (ram_top >= 0x100000000)
+		ram_top = (phys_addr_t) 0x100000000;
+
+	gd->arch.tlb_addr = ram_top - gd->arch.tlb_size;
+	debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr,
+	      gd->arch.tlb_addr + gd->arch.tlb_size);
+
+	dcache_enable();
+#endif
+}
+
+#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
+void spl_board_prepare_for_boot(void)
+{
+	dcache_disable();
+}
+
+void spl_board_prepare_for_linux(void)
+{
+	dcache_disable();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/common.h b/roms/u-boot/arch/arm/mach-k3/common.h
new file mode 100644
index 000000000..a6dbc7808
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/common.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K3: Architecture common definitions
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <asm/armv7_mpu.h>
+#include <asm/hardware.h>
+
+#define J721E  0xbb64
+#define J7200  0xbb6d
+
+struct fwl_data {
+	const char *name;
+	u16 fwl_id;
+	u16 regions;
+};
+
+void setup_k3_mpu_regions(void);
+int early_console_init(void);
+void disable_linefill_optimization(void);
+void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size);
+void start_non_linux_remote_cores(void);
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr);
+void k3_sysfw_print_ver(void);
+void spl_enable_dcache(void);
+void mmr_unlock(phys_addr_t base, u32 partition);
+bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data);
diff --git a/roms/u-boot/arch/arm/mach-k3/config.mk b/roms/u-boot/arch/arm/mach-k3/config.mk
new file mode 100644
index 000000000..41fee2b5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/config.mk
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
+#	Lokesh Vutla <lokeshvutla@ti.com>
+
+ifdef CONFIG_SPL_BUILD
+
+# Openssl is required to generate x509 certificate.
+# Error out if openssl is not available.
+ifeq ($(shell which openssl),)
+$(error "No openssl in $(PATH), consider installing openssl")
+endif
+
+IMAGE_SIZE= $(shell cat $(obj)/u-boot-spl.bin | wc -c)
+MAX_SIZE= $(shell printf "%d" $(CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE))
+
+ifeq ($(CONFIG_SYS_K3_KEY), "")
+KEY=""
+# On HS use real key or warn if not available
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/keys/custMpk.pem),)
+KEY=$(TI_SECURE_DEV_PKG)/keys/custMpk.pem
+else
+$(warning "WARNING: signing key not found. Random key will NOT work on HS hardware!")
+endif
+endif
+else
+KEY=$(patsubst "%",$(srctree)/%,$(CONFIG_SYS_K3_KEY))
+endif
+
+# tiboot3.bin is mandated by ROM and ROM only supports R5 boot.
+# So restrict tiboot3.bin creation for CPU_V7R.
+ifdef CONFIG_CPU_V7R
+image_check: $(obj)/u-boot-spl.bin FORCE
+	@if [ $(IMAGE_SIZE) -gt $(MAX_SIZE) ]; then			    \
+		echo "===============================================" >&2; \
+		echo "ERROR: Final Image too big. " >&2;		    \
+		echo "$< size = $(IMAGE_SIZE), max size = $(MAX_SIZE)" >&2; \
+		echo "===============================================" >&2; \
+		exit 1;							    \
+	fi
+
+tiboot3.bin: image_check FORCE
+	$(srctree)/tools/k3_gen_x509_cert.sh -c 16 -b $(obj)/u-boot-spl.bin \
+				-o $@ -l $(CONFIG_SPL_TEXT_BASE) -k $(KEY)
+
+INPUTS-y	+= tiboot3.bin
+endif
+
+ifdef CONFIG_ARM64
+
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+SPL_ITS := u-boot-spl-k3_HS.its
+$(SPL_ITS): export IS_HS=1
+INPUTS-y	+= tispl.bin_HS
+else
+SPL_ITS := u-boot-spl-k3.its
+INPUTS-y	+= tispl.bin
+endif
+
+ifeq ($(CONFIG_SPL_OF_LIST),)
+LIST_OF_DTB := $(CONFIG_DEFAULT_DEVICE_TREE)
+else
+LIST_OF_DTB := $(CONFIG_SPL_OF_LIST)
+endif
+
+quiet_cmd_k3_mkits = MKITS   $@
+cmd_k3_mkits = \
+	$(srctree)/tools/k3_fit_atf.sh \
+	$(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(LIST_OF_DTB))) > $@
+
+$(SPL_ITS): FORCE
+	$(call cmd,k3_mkits)
+endif
+
+else
+
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+INPUTS-y	+= u-boot.img_HS
+else
+INPUTS-y	+= u-boot.img
+endif
+endif
+
+include $(srctree)/arch/arm/mach-k3/config_secure.mk
diff --git a/roms/u-boot/arch/arm/mach-k3/config_secure.mk b/roms/u-boot/arch/arm/mach-k3/config_secure.mk
new file mode 100644
index 000000000..6d63c5766
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/config_secure.mk
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2018 Texas Instruments, Incorporated - http://www.ti.com/
+#	Andrew F. Davis <afd@ti.com>
+
+quiet_cmd_k3secureimg = SECURE  $@
+ifneq ($(TI_SECURE_DEV_PKG),)
+ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh),)
+cmd_k3secureimg = $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh \
+	$< $@ \
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+else
+cmd_k3secureimg = echo "WARNING:" \
+	"$(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh not found." \
+	"$@ was NOT secured!"; cp $< $@
+endif
+else
+cmd_k3secureimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
+	"variable must be defined for TI secure devices." \
+	"$@ was NOT secured!"; cp $< $@
+endif
+
+%.dtb_HS: %.dtb FORCE
+	$(call if_changed,k3secureimg)
+
+$(obj)/u-boot-spl-nodtb.bin_HS: $(obj)/u-boot-spl-nodtb.bin FORCE
+	$(call if_changed,k3secureimg)
+
+tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(subst ",,$(CONFIG_SPL_OF_LIST))) $(SPL_ITS) FORCE
+	$(call if_changed,mkfitimage)
+
+MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
+	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
+
+OF_LIST_TARGETS = $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
+$(OF_LIST_TARGETS): dtbs
+
+u-boot-nodtb.bin_HS: u-boot-nodtb.bin FORCE
+	$(call if_changed,k3secureimg)
+
+u-boot.img_HS: u-boot-nodtb.bin_HS u-boot.img $(patsubst %.dtb,%.dtb_HS,$(OF_LIST_TARGETS)) FORCE
+	$(call if_changed,mkimage)
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/am64_hardware.h b/roms/u-boot/arch/arm/mach-k3/include/mach/am64_hardware.h
new file mode 100644
index 000000000..c368aa7e6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/am64_hardware.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K3: AM64 SoC definitions, structures etc.
+ *
+ * (C) Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef __ASM_ARCH_AM64_HARDWARE_H
+#define __ASM_ARCH_AM64_HARDWARE_H
+
+#include <config.h>
+
+#define CTRL_MMR0_BASE					0x43000000
+#define CTRLMMR_MAIN_DEVSTAT				(CTRL_MMR0_BASE + 0x30)
+
+#define PADCFG_MMR1_BASE				0xf0000
+
+#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK		0x00000078
+#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT		3
+
+#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK		0x00000380
+#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT		7
+
+#define MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK		0x00001c00
+#define MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT		10
+
+#define MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK		0x00002000
+#define MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT		13
+
+/* After the cfg mask and shifts have been applied */
+#define MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT		2
+#define MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK		0x04
+
+/*
+ * The CTRL_MMR and PADCFG_MMR memory space is divided into several
+ * equally-spaced partitions, so defining the partition size allows us to
+ * determine register addresses common to those partitions.
+ */
+#define CTRL_MMR0_PARTITION_SIZE			0x4000
+
+/*
+ * CTRL_MMR and PADCFG_MMR lock/kick-mechanism shared register definitions.
+ */
+#define CTRLMMR_LOCK_KICK0				0x01008
+#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL			0x68ef3490
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK		BIT(0)
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT		0
+#define CTRLMMR_LOCK_KICK1				0x0100c
+#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL			0xd172bc5a
+
+#define ROM_ENTENDED_BOOT_DATA_INFO			0x701beb00
+
+/* Use Last 1K as Scratch pad */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START		0x701bfc00
+
+#endif /* __ASM_ARCH_DRA8_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/am64_spl.h b/roms/u-boot/arch/arm/mach-k3/include/mach/am64_spl.h
new file mode 100644
index 000000000..36826cfc4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/am64_spl.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ *	Keerthy <j-keerthy@ti.com>
+ */
+#ifndef _ASM_ARCH_AM64_SPL_H_
+#define _ASM_ARCH_AM64_SPL_H_
+
+/* Primary BootMode devices */
+#define BOOT_DEVICE_RAM			0x00
+#define BOOT_DEVICE_OSPI		0x01
+#define BOOT_DEVICE_QSPI		0x02
+#define BOOT_DEVICE_SPI			0x03
+#define BOOT_DEVICE_ETHERNET		0x04
+#define BOOT_DEVICE_ETHERNET_RGMII	0x04
+#define BOOT_DEVICE_ETHERNET_RMII	0x05
+#define BOOT_DEVICE_I2C			0x06
+#define BOOT_DEVICE_UART		0x07
+#define BOOT_DEVICE_MMC			0x08
+#define BOOT_DEVICE_EMMC		0x09
+
+#define BOOT_DEVICE_USB			0x0A
+#define BOOT_DEVICE_GPMC_NOR		0x0C
+#define BOOT_DEVICE_PCIE		0x0D
+#define BOOT_DEVICE_XSPI		0x0E
+
+#define BOOT_DEVICE_NOBOOT		0x0F
+
+#define BOOT_DEVICE_MMC2		0x08
+#define BOOT_DEVICE_MMC1		0x09
+/* INVALID */
+#define BOOT_DEVICE_MMC2_2		0x1F
+
+/* Backup BootMode devices */
+#define BACKUP_BOOT_DEVICE_USB		0x01
+#define BACKUP_BOOT_DEVICE_UART		0x03
+#define BACKUP_BOOT_DEVICE_ETHERNET	0x04
+#define BACKUP_BOOT_DEVICE_MMC		0x05
+#define BACKUP_BOOT_DEVICE_SPI		0x06
+#define BACKUP_BOOT_DEVICE_I2C		0x07
+
+#define K3_PRIMARY_BOOTMODE		0x0
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/am6_hardware.h b/roms/u-boot/arch/arm/mach-k3/include/mach/am6_hardware.h
new file mode 100644
index 000000000..1908a13f0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/am6_hardware.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K3: AM6 SoC definitions, structures etc.
+ *
+ * (C) Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#ifndef __ASM_ARCH_AM6_HARDWARE_H
+#define __ASM_ARCH_AM6_HARDWARE_H
+
+#include <config.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define CTRL_MMR0_BASE					0x00100000
+#define CTRLMMR_MAIN_DEVSTAT				(CTRL_MMR0_BASE + 0x30)
+
+#define CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK		GENMASK(3, 0)
+#define CTRLMMR_MAIN_DEVSTAT_BOOTMODE_SHIFT		0
+#define CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_MASK		GENMASK(6, 4)
+#define CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT	4
+#define CTRLMMR_MAIN_DEVSTAT_MMC_PORT_MASK		GENMASK(12, 12)
+#define CTRLMMR_MAIN_DEVSTAT_MMC_PORT_SHIFT		12
+#define CTRLMMR_MAIN_DEVSTAT_EMMC_PORT_MASK		GENMASK(14, 14)
+#define CTRLMMR_MAIN_DEVSTAT_EMMC_PORT_SHIFT		14
+#define CTRLMMR_MAIN_DEVSTAT_BKUP_MMC_PORT_MASK		GENMASK(17, 17)
+#define CTRLMMR_MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT	12
+#define CTRLMMR_MAIN_DEVSTAT_USB_MODE_SHIFT		9
+#define CTRLMMR_MAIN_DEVSTAT_USB_MODE_MASK		GENMASK(10, 9)
+
+#define WKUP_CTRL_MMR0_BASE				0x43000000
+#define MCU_CTRL_MMR0_BASE				0x40f00000
+
+/*
+ * The CTRL_MMR0 memory space is divided into several equally-spaced
+ * partitions, so defining the partition size allows us to determine
+ * register addresses common to those partitions.
+ */
+#define CTRL_MMR0_PARTITION_SIZE			0x4000
+
+/*
+ * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTR_MMR0 lock/kick-mechanism
+ * shared register definitions.
+ */
+#define CTRLMMR_LOCK_KICK0				0x01008
+#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL			0x68ef3490
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK		BIT(0)
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT		0
+#define CTRLMMR_LOCK_KICK1				0x0100c
+#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL			0xd172bc5a
+
+/* MCU SCRATCHPAD usage */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
+
+#endif /* __ASM_ARCH_AM6_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/am6_spl.h b/roms/u-boot/arch/arm/mach-k3/include/mach/am6_spl.h
new file mode 100644
index 000000000..61e038092
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/am6_spl.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+#ifndef _ASM_ARCH_AM6_SPL_H_
+#define _ASM_ARCH_AM6_SPL_H_
+
+#define BOOT_DEVICE_RAM			0x00
+#define BOOT_DEVICE_OSPI		0x01
+#define BOOT_DEVICE_QSPI		0x02
+#define BOOT_DEVICE_HYPERFLASH		0x03
+#define BOOT_DEVICE_SPI			0x04
+#define BOOT_DEVICE_I2C			0x05
+#define BOOT_DEVICE_MMC2		0x06
+#define BOOT_DEVICE_ETHERNET		0x07
+#define BOOT_DEVICE_DFU			0x08
+#define BOOT_DEVICE_USB			0x408
+#define BOOT_DEVICE_PCIE		0x09
+#define BOOT_DEVICE_UART		0x0a
+#define BOOT_DEVICE_NAND		0x0c
+#define BOOT_DEVICE_MMC1		0x0d
+#define BOOT_DEVICE_MMC2_2		0x0e
+
+#define BACKUP_BOOT_DEVICE_RAM		0x0
+#define BACKUP_BOOT_DEVICE_USB		0x1
+#define BACKUP_BOOT_DEVICE_UART		0x2
+#define BACKUP_BOOT_DEVICE_ETHERNET	0x3
+#define BACKUP_BOOT_DEVICE_MMC2		0x4
+#define BACKUP_BOOT_DEVICE_SPI		0x5
+#define BACKUP_BOOT_DEVICE_HYPERFLASH	0x6
+#define BACKUP_BOOT_DEVICE_I2C		0x7
+
+#define K3_PRIMARY_BOOTMODE		0x0
+#define K3_BACKUP_BOOTMODE		0x1
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/clock.h b/roms/u-boot/arch/arm/mach-k3/include/mach/clock.h
new file mode 100644
index 000000000..e3adbcd9d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/clock.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K3: Common SoC clock definitions.
+ *
+ * (C) Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#include <config.h>
+
+/* Clock Defines */
+#define V_OSCK				24000000
+#define V_SCLK				V_OSCK
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/hardware.h b/roms/u-boot/arch/arm/mach-k3/include/mach/hardware.h
new file mode 100644
index 000000000..8725e7d51
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/hardware.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+#ifndef _ASM_ARCH_HARDWARE_H_
+#define _ASM_ARCH_HARDWARE_H_
+
+#ifdef CONFIG_SOC_K3_AM6
+#include "am6_hardware.h"
+#endif
+
+#ifdef CONFIG_SOC_K3_J721E
+#include "j721e_hardware.h"
+#endif
+
+#ifdef CONFIG_SOC_K3_AM642
+#include "am64_hardware.h"
+#endif
+
+/* Assuming these addresses and definitions stay common across K3 devices */
+#define CTRLMMR_WKUP_JTAG_ID	0x43000014
+#define JTAG_ID_VARIANT_SHIFT	28
+#define JTAG_ID_VARIANT_MASK	(0xf << 28)
+#define JTAG_ID_PARTNO_SHIFT	12
+#define JTAG_ID_PARTNO_MASK	(0xffff << 12)
+
+#define K3_ROM_BOOT_HEADER_MAGIC	"EXTBOOT"
+
+struct rom_extended_boot_data {
+	char header[8];
+	u32 num_components;
+};
+
+#endif /* _ASM_ARCH_HARDWARE_H_ */
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/j721e_hardware.h b/roms/u-boot/arch/arm/mach-k3/include/mach/j721e_hardware.h
new file mode 100644
index 000000000..b98f0a82f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/j721e_hardware.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K3: J721E SoC definitions, structures etc.
+ *
+ * (C) Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#ifndef __ASM_ARCH_J721E_HARDWARE_H
+#define __ASM_ARCH_J721E_HARDWARE_H
+
+#include <config.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define CTRL_MMR0_BASE					0x00100000
+#define CTRLMMR_MAIN_DEVSTAT				(CTRL_MMR0_BASE + 0x30)
+
+#define MAIN_DEVSTAT_BOOT_MODE_B_MASK		BIT(0)
+#define MAIN_DEVSTAT_BOOT_MODE_B_SHIFT		0
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_MASK		GENMASK(3, 1)
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT	1
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK	BIT(6)
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT		6
+#define MAIN_DEVSTAT_BKUP_MMC_PORT_MASK			BIT(7)
+#define MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT		7
+
+#define WKUP_CTRL_MMR0_BASE				0x43000000
+#define MCU_CTRL_MMR0_BASE				0x40f00000
+
+#define CTRLMMR_WKUP_DEVSTAT			(WKUP_CTRL_MMR0_BASE + 0x30)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK	GENMASK(5, 3)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT	3
+#define WKUP_DEVSTAT_MCU_OMLY_MASK		BIT(6)
+#define WKUP_DEVSTAT_MCU_ONLY_SHIFT		6
+
+/*
+ * The CTRL_MMR0 memory space is divided into several equally-spaced
+ * partitions, so defining the partition size allows us to determine
+ * register addresses common to those partitions.
+ */
+#define CTRL_MMR0_PARTITION_SIZE			0x4000
+
+/*
+ * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTR_MMR0 lock/kick-mechanism
+ * shared register definitions.
+ */
+#define CTRLMMR_LOCK_KICK0				0x01008
+#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL			0x68ef3490
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK		BIT(0)
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT		0
+#define CTRLMMR_LOCK_KICK1				0x0100c
+#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL			0xd172bc5a
+
+/* ROM HANDOFF Structure location */
+#define ROM_ENTENDED_BOOT_DATA_INFO			0x41cffb00
+
+/* MCU SCRATCHPAD usage */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START	CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
+
+#endif /* __ASM_ARCH_J721E_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/j721e_spl.h b/roms/u-boot/arch/arm/mach-k3/include/mach/j721e_spl.h
new file mode 100644
index 000000000..e8947917a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/j721e_spl.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+#ifndef _ASM_ARCH_J721E_SPL_H_
+#define _ASM_ARCH_J721E_SPL_H_
+
+/* With BootMode B = 0 */
+#include <linux/bitops.h>
+#define BOOT_DEVICE_HYPERFLASH		0x00
+#define BOOT_DEVICE_OSPI		0x01
+#define BOOT_DEVICE_QSPI		0x02
+#define BOOT_DEVICE_SPI			0x03
+#define BOOT_DEVICE_ETHERNET		0x04
+#define BOOT_DEVICE_I2C			0x06
+#define BOOT_DEVICE_UART		0x07
+#define BOOT_DEVICE_NOR			BOOT_DEVICE_HYPERFLASH
+
+/* With BootMode B = 1 */
+#define BOOT_DEVICE_MMC2		0x10
+#define BOOT_DEVICE_MMC1		0x11
+#define BOOT_DEVICE_DFU			0x12
+#define BOOT_DEVICE_UFS			0x13
+#define BOOT_DEVIE_GPMC			0x14
+#define BOOT_DEVICE_PCIE		0x15
+#define BOOT_DEVICE_MMC2_2		0x16
+#define BOOT_DEVICE_RAM			0x17
+
+/* Backup boot modes with MCU Only = 0 */
+#define BACKUP_BOOT_DEVICE_RAM		0x0
+#define BACKUP_BOOT_DEVICE_USB		0x1
+#define BACKUP_BOOT_DEVICE_UART		0x3
+#define BACKUP_BOOT_DEVICE_ETHERNET	0x4
+#define BACKUP_BOOT_DEVICE_MMC2		0x5
+#define BACKUP_BOOT_DEVICE_SPI		0x6
+#define BACKUP_BOOT_DEVICE_I2C		0x7
+
+#define BOOT_MODE_B_SHIFT		4
+#define BOOT_MODE_B_MASK		BIT(4)
+
+#define K3_PRIMARY_BOOTMODE		0x0
+#define K3_BACKUP_BOOTMODE		0x1
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/spl.h b/roms/u-boot/arch/arm/mach-k3/include/mach/spl.h
new file mode 100644
index 000000000..ef1c3fb8c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/spl.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_ARCH_SPL_H_
+
+#ifdef CONFIG_SOC_K3_AM6
+#include "am6_spl.h"
+#endif
+
+#ifdef CONFIG_SOC_K3_J721E
+#include "j721e_spl.h"
+#endif
+
+#ifdef CONFIG_SOC_K3_AM642
+#include "am64_spl.h"
+#endif
+#endif /* _ASM_ARCH_SPL_H_ */
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/sys_proto.h b/roms/u-boot/arch/arm/mach-k3/include/mach/sys_proto.h
new file mode 100644
index 000000000..60287b261
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/sys_proto.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andreas Dannenberg <dannenberg@ti.com>
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+void sdelay(unsigned long loops);
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr,
+		  u32 bound);
+struct ti_sci_handle *get_ti_sci_handle(void);
+int fdt_fixup_msmc_ram(void *blob, char *parent_path, char *node_name);
+int do_board_detect(void);
+void release_resources_for_core_shutdown(void);
+int fdt_disable_node(void *blob, char *node_path);
+
+bool soc_is_j721e(void);
+bool soc_is_j7200(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/include/mach/sysfw-loader.h b/roms/u-boot/arch/arm/mach-k3/include/mach/sysfw-loader.h
new file mode 100644
index 000000000..b23a9e821
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/include/mach/sysfw-loader.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andreas Dannenberg <dannenberg@ti.com>
+ */
+
+#ifndef _SYSFW_LOADER_H_
+#define _SYSFW_LOADER_H_
+
+void k3_sysfw_loader(bool rom_loaded_sysfw,
+		     void (*config_pm_pre_callback)(void),
+		     void (*config_pm_done_callback)(void));
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/j721e_init.c b/roms/u-boot/arch/arm/mach-k3/j721e_init.c
new file mode 100644
index 000000000..76a04a903
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/j721e_init.c
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * J721E: SoC specific initialization
+ *
+ * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/armv7_mpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sysfw-loader.h>
+#include "common.h"
+#include <asm/arch/sys_proto.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <dm/pinctrl.h>
+#include <mmc.h>
+#include <remoteproc.h>
+
+#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_K3_LOAD_SYSFW
+#ifdef CONFIG_TI_SECURE_DEVICE
+struct fwl_data cbass_hc_cfg0_fwls[] = {
+	{ "PCIE0_CFG", 2560, 8 },
+	{ "PCIE1_CFG", 2561, 8 },
+	{ "USB3SS0_CORE", 2568, 4 },
+	{ "USB3SS1_CORE", 2570, 4 },
+	{ "EMMC8SS0_CFG", 2576, 4 },
+	{ "UFS_HCI0_CFG", 2580, 4 },
+	{ "SERDES0", 2584, 1 },
+	{ "SERDES1", 2585, 1 },
+}, cbass_hc0_fwls[] = {
+	{ "PCIE0_HP", 2528, 24 },
+	{ "PCIE0_LP", 2529, 24 },
+	{ "PCIE1_HP", 2530, 24 },
+	{ "PCIE1_LP", 2531, 24 },
+}, cbass_rc_cfg0_fwls[] = {
+	{ "EMMCSD4SS0_CFG", 2380, 4 },
+}, cbass_rc0_fwls[] = {
+	{ "GPMC0", 2310, 8 },
+}, infra_cbass0_fwls[] = {
+	{ "PLL_MMR0", 8, 26 },
+	{ "CTRL_MMR0", 9, 16 },
+}, mcu_cbass0_fwls[] = {
+	{ "MCU_R5FSS0_CORE0", 1024, 4 },
+	{ "MCU_R5FSS0_CORE0_CFG", 1025, 2 },
+	{ "MCU_R5FSS0_CORE1", 1028, 4 },
+	{ "MCU_FSS0_CFG", 1032, 12 },
+	{ "MCU_FSS0_S1", 1033, 8 },
+	{ "MCU_FSS0_S0", 1036, 8 },
+	{ "MCU_PSROM49152X32", 1048, 1 },
+	{ "MCU_MSRAM128KX64", 1050, 8 },
+	{ "MCU_CTRL_MMR0", 1200, 8 },
+	{ "MCU_PLL_MMR0", 1201, 3 },
+	{ "MCU_CPSW0", 1220, 2 },
+}, wkup_cbass0_fwls[] = {
+	{ "WKUP_CTRL_MMR0", 131, 16 },
+};
+#endif
+#endif
+
+static void ctrl_mmr_unlock(void)
+{
+	/* Unlock all WKUP_CTRL_MMR0 module registers */
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 0);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 1);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 2);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 3);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 4);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 6);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 7);
+
+	/* Unlock all MCU_CTRL_MMR0 module registers */
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 0);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 1);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 2);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 3);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 4);
+
+	/* Unlock all CTRL_MMR0 module registers */
+	mmr_unlock(CTRL_MMR0_BASE, 0);
+	mmr_unlock(CTRL_MMR0_BASE, 1);
+	mmr_unlock(CTRL_MMR0_BASE, 2);
+	mmr_unlock(CTRL_MMR0_BASE, 3);
+	mmr_unlock(CTRL_MMR0_BASE, 5);
+	if (soc_is_j721e())
+		mmr_unlock(CTRL_MMR0_BASE, 6);
+	mmr_unlock(CTRL_MMR0_BASE, 7);
+}
+
+#if defined(CONFIG_K3_LOAD_SYSFW)
+void k3_mmc_stop_clock(void)
+{
+	if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+		struct mmc *mmc = find_mmc_device(0);
+
+		if (!mmc)
+			return;
+
+		mmc->saved_clock = mmc->clock;
+		mmc_set_clock(mmc, 0, true);
+	}
+}
+
+void k3_mmc_restart_clock(void)
+{
+	if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+		struct mmc *mmc = find_mmc_device(0);
+
+		if (!mmc)
+			return;
+
+		mmc_set_clock(mmc, mmc->saved_clock, false);
+	}
+}
+#endif
+
+/*
+ * This uninitialized global variable would normal end up in the .bss section,
+ * but the .bss is cleared between writing and reading this variable, so move
+ * it to the .data section.
+ */
+u32 bootindex __section(".data");
+static struct rom_extended_boot_data bootdata __section(".data");
+
+static void store_boot_info_from_rom(void)
+{
+	bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
+	memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
+	       sizeof(struct rom_extended_boot_data));
+}
+
+void board_init_f(ulong dummy)
+{
+#if defined(CONFIG_K3_J721E_DDRSS) || defined(CONFIG_K3_LOAD_SYSFW)
+	struct udevice *dev;
+	int ret;
+#endif
+	/*
+	 * Cannot delay this further as there is a chance that
+	 * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
+	 */
+	store_boot_info_from_rom();
+
+	/* Make all control module registers accessible */
+	ctrl_mmr_unlock();
+
+#ifdef CONFIG_CPU_V7R
+	disable_linefill_optimization();
+	setup_k3_mpu_regions();
+#endif
+
+	/* Init DM early */
+	spl_early_init();
+
+#ifdef CONFIG_K3_LOAD_SYSFW
+	/*
+	 * Process pinctrl for the serial0 a.k.a. MCU_UART0 module and continue
+	 * regardless of the result of pinctrl. Do this without probing the
+	 * device, but instead by searching the device that would request the
+	 * given sequence number if probed. The UART will be used by the system
+	 * firmware (SYSFW) image for various purposes and SYSFW depends on us
+	 * to initialize its pin settings.
+	 */
+	ret = uclass_find_device_by_seq(UCLASS_SERIAL, 0, &dev);
+	if (!ret)
+		pinctrl_select_state(dev, "default");
+
+	/*
+	 * Load, start up, and configure system controller firmware. Provide
+	 * the U-Boot console init function to the SYSFW post-PM configuration
+	 * callback hook, effectively switching on (or over) the console
+	 * output.
+	 */
+	k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata),
+			k3_mmc_stop_clock, k3_mmc_restart_clock);
+
+	/* Prepare console output */
+	preloader_console_init();
+
+	/* Disable ROM configured firewalls right after loading sysfw */
+#ifdef CONFIG_TI_SECURE_DEVICE
+	remove_fwl_configs(cbass_hc_cfg0_fwls, ARRAY_SIZE(cbass_hc_cfg0_fwls));
+	remove_fwl_configs(cbass_hc0_fwls, ARRAY_SIZE(cbass_hc0_fwls));
+	remove_fwl_configs(cbass_rc_cfg0_fwls, ARRAY_SIZE(cbass_rc_cfg0_fwls));
+	remove_fwl_configs(cbass_rc0_fwls, ARRAY_SIZE(cbass_rc0_fwls));
+	remove_fwl_configs(infra_cbass0_fwls, ARRAY_SIZE(infra_cbass0_fwls));
+	remove_fwl_configs(mcu_cbass0_fwls, ARRAY_SIZE(mcu_cbass0_fwls));
+	remove_fwl_configs(wkup_cbass0_fwls, ARRAY_SIZE(wkup_cbass0_fwls));
+#endif
+#else
+	/* Prepare console output */
+	preloader_console_init();
+#endif
+
+	/* Output System Firmware version info */
+	k3_sysfw_print_ver();
+
+	/* Perform EEPROM-based board detection */
+	if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+		do_board_detect();
+
+#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
+	ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs),
+					  &dev);
+	if (ret)
+		printf("AVS init failed: %d\n", ret);
+#endif
+
+#if defined(CONFIG_K3_J721E_DDRSS)
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret)
+		panic("DRAM init failed: %d\n", ret);
+#endif
+	spl_enable_dcache();
+}
+
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+	switch (boot_device) {
+	case BOOT_DEVICE_MMC1:
+		return MMCSD_MODE_EMMCBOOT;
+	case BOOT_DEVICE_MMC2:
+		return MMCSD_MODE_FS;
+	default:
+		return MMCSD_MODE_RAW;
+	}
+}
+
+static u32 __get_backup_bootmedia(u32 main_devstat)
+{
+	u32 bkup_boot = (main_devstat & MAIN_DEVSTAT_BKUP_BOOTMODE_MASK) >>
+			MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT;
+
+	switch (bkup_boot) {
+	case BACKUP_BOOT_DEVICE_USB:
+		return BOOT_DEVICE_DFU;
+	case BACKUP_BOOT_DEVICE_UART:
+		return BOOT_DEVICE_UART;
+	case BACKUP_BOOT_DEVICE_ETHERNET:
+		return BOOT_DEVICE_ETHERNET;
+	case BACKUP_BOOT_DEVICE_MMC2:
+	{
+		u32 port = (main_devstat & MAIN_DEVSTAT_BKUP_MMC_PORT_MASK) >>
+			    MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT;
+		if (port == 0x0)
+			return BOOT_DEVICE_MMC1;
+		return BOOT_DEVICE_MMC2;
+	}
+	case BACKUP_BOOT_DEVICE_SPI:
+		return BOOT_DEVICE_SPI;
+	case BACKUP_BOOT_DEVICE_I2C:
+		return BOOT_DEVICE_I2C;
+	}
+
+	return BOOT_DEVICE_RAM;
+}
+
+static u32 __get_primary_bootmedia(u32 main_devstat, u32 wkup_devstat)
+{
+
+	u32 bootmode = (wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
+			WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
+
+	bootmode |= (main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) <<
+			BOOT_MODE_B_SHIFT;
+
+	if (bootmode == BOOT_DEVICE_OSPI || bootmode ==	BOOT_DEVICE_QSPI)
+		bootmode = BOOT_DEVICE_SPI;
+
+	if (bootmode == BOOT_DEVICE_MMC2) {
+		u32 port = (main_devstat &
+			    MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK) >>
+			   MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT;
+		if (port == 0x0)
+			bootmode = BOOT_DEVICE_MMC1;
+	}
+
+	return bootmode;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT);
+	u32 main_devstat;
+
+	if (wkup_devstat & WKUP_DEVSTAT_MCU_OMLY_MASK) {
+		printf("ERROR: MCU only boot is not yet supported\n");
+		return BOOT_DEVICE_RAM;
+	}
+
+	/* MAIN CTRL MMR can only be read if MCU ONLY is 0 */
+	main_devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+
+	if (bootindex == K3_PRIMARY_BOOTMODE)
+		return __get_primary_bootmedia(main_devstat, wkup_devstat);
+	else
+		return __get_backup_bootmedia(main_devstat);
+}
+#endif
+
+#ifdef CONFIG_SYS_K3_SPL_ATF
+
+#define J721E_DEV_MCU_RTI0			262
+#define J721E_DEV_MCU_RTI1			263
+#define J721E_DEV_MCU_ARMSS0_CPU0		250
+#define J721E_DEV_MCU_ARMSS0_CPU1		251
+
+void release_resources_for_core_shutdown(void)
+{
+	struct ti_sci_handle *ti_sci;
+	struct ti_sci_dev_ops *dev_ops;
+	struct ti_sci_proc_ops *proc_ops;
+	int ret;
+	u32 i;
+
+	const u32 put_device_ids[] = {
+		J721E_DEV_MCU_RTI0,
+		J721E_DEV_MCU_RTI1,
+	};
+
+	ti_sci = get_ti_sci_handle();
+	dev_ops = &ti_sci->ops.dev_ops;
+	proc_ops = &ti_sci->ops.proc_ops;
+
+	/* Iterate through list of devices to put (shutdown) */
+	for (i = 0; i < ARRAY_SIZE(put_device_ids); i++) {
+		u32 id = put_device_ids[i];
+
+		ret = dev_ops->put_device(ti_sci, id);
+		if (ret)
+			panic("Failed to put device %u (%d)\n", id, ret);
+	}
+
+	const u32 put_core_ids[] = {
+		J721E_DEV_MCU_ARMSS0_CPU1,
+		J721E_DEV_MCU_ARMSS0_CPU0,	/* Handle CPU0 after CPU1 */
+	};
+
+	/* Iterate through list of cores to put (shutdown) */
+	for (i = 0; i < ARRAY_SIZE(put_core_ids); i++) {
+		u32 id = put_core_ids[i];
+
+		/*
+		 * Queue up the core shutdown request. Note that this call
+		 * needs to be followed up by an actual invocation of an WFE
+		 * or WFI CPU instruction.
+		 */
+		ret = proc_ops->proc_shutdown_no_wait(ti_sci, id);
+		if (ret)
+			panic("Failed sending core %u shutdown message (%d)\n",
+			      id, ret);
+	}
+}
+#endif
+
+#ifdef CONFIG_SYS_K3_SPL_ATF
+void start_non_linux_remote_cores(void)
+{
+	int size = 0, ret;
+	u32 loadaddr = 0;
+
+	if (!soc_is_j721e())
+		return;
+
+	size = load_firmware("name_mainr5f0_0fw", "addr_mainr5f0_0load",
+			     &loadaddr);
+	if (size <= 0)
+		goto err_load;
+
+	/* assuming remoteproc 2 is aliased for the needed remotecore */
+	ret = rproc_load(2, loadaddr, size);
+	if (ret) {
+		printf("Firmware failed to start on rproc (%d)\n", ret);
+		goto err_load;
+	}
+
+	ret = rproc_start(2);
+	if (ret) {
+		printf("Firmware init failed on rproc (%d)\n", ret);
+		goto err_load;
+	}
+
+	printf("Remoteproc 2 started successfully\n");
+
+	return;
+
+err_load:
+	rproc_reset(2);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-k3/lowlevel_init.S b/roms/u-boot/arch/arm/mach-k3/lowlevel_init.S
new file mode 100644
index 000000000..70c5d1cad
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/lowlevel_init.S
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+
+	mrc	p15, 0, r0, c0, c0, 5		@ Read MPIDR
+	and	r0, #0xff
+	cmp	r0, #0x0
+	bne	park_cpu
+	bx	lr
+park_cpu:
+	wfi
+	b	park_cpu
+
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-k3/r5_mpu.c b/roms/u-boot/arch/arm/mach-k3/r5_mpu.c
new file mode 100644
index 000000000..3d2ff6775
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/r5_mpu.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * K3: R5 MPU region definitions
+ *
+ * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/kernel.h>
+#include "common.h"
+
+struct mpu_region_config k3_mpu_regions[16] = {
+	/*
+	 * Make all 4GB as Device Memory and not executable. We are overriding
+	 * it with next region for any requirement.
+	 */
+	{0x00000000, REGION_0, XN_EN, PRIV_RW_USR_RW, SHARED_WRITE_BUFFERED,
+	 REGION_4GB},
+
+	/* SPL code area marking it as WB and Write allocate. */
+	{CONFIG_SPL_TEXT_BASE, REGION_1, XN_DIS, PRIV_RW_USR_RW,
+	 O_I_WB_RD_WR_ALLOC, REGION_8MB},
+
+	/* U-Boot's code area marking it as WB and Write allocate */
+	{CONFIG_SYS_SDRAM_BASE, REGION_2, XN_DIS, PRIV_RW_USR_RW,
+	 O_I_WB_RD_WR_ALLOC, REGION_2GB},
+	/* mcu_r5fss0_core0 BTCM area marking it as WB and Write allocate. */
+	{0x41010000, 3, XN_DIS, PRIV_RW_USR_RW, O_I_WB_RD_WR_ALLOC,
+	 REGION_8MB},
+	{0x0, 4, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 5, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 6, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 7, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 8, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 9, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 10, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 11, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 12, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 13, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 14, 0x0, 0x0, 0x0, 0x0},
+	{0x0, 15, 0x0, 0x0, 0x0, 0x0},
+};
+
+void setup_k3_mpu_regions(void)
+{
+	setup_mpu_regions(k3_mpu_regions, ARRAY_SIZE(k3_mpu_regions));
+}
diff --git a/roms/u-boot/arch/arm/mach-k3/security.c b/roms/u-boot/arch/arm/mach-k3/security.c
new file mode 100644
index 000000000..66f90a5a3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/security.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * K3: Security functions
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <hang.h>
+#include <image.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <mach/spl.h>
+#include <spl.h>
+#include <asm/arch/sys_proto.h>
+
+void board_fit_image_post_process(void **p_image, size_t *p_size)
+{
+	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+	struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;
+	u64 image_addr;
+	u32 image_size;
+	int ret;
+
+	image_addr = (uintptr_t)*p_image;
+	image_size = *p_size;
+
+	debug("Authenticating image at address 0x%016llx\n", image_addr);
+	debug("Authenticating image of size %d bytes\n", image_size);
+
+	flush_dcache_range((unsigned long)image_addr,
+			   ALIGN((unsigned long)image_addr + image_size,
+				 ARCH_DMA_MINALIGN));
+
+	/* Authenticate image */
+	ret = proc_ops->proc_auth_boot_image(ti_sci, &image_addr, &image_size);
+	if (ret) {
+		printf("Authentication failed!\n");
+		hang();
+	}
+
+	if (image_size)
+		invalidate_dcache_range((unsigned long)image_addr,
+					ALIGN((unsigned long)image_addr +
+					      image_size, ARCH_DMA_MINALIGN));
+
+	/*
+	 * The image_size returned may be 0 when the authentication process has
+	 * moved the image. When this happens no further processing on the
+	 * image is needed or often even possible as it may have also been
+	 * placed behind a firewall when moved.
+	 */
+	*p_size = image_size;
+
+	/*
+	 * Output notification of successful authentication to re-assure the
+	 * user that the secure code is being processed as expected. However
+	 * suppress any such log output in case of building for SPL and booting
+	 * via YMODEM. This is done to avoid disturbing the YMODEM serial
+	 * protocol transactions.
+	 */
+	if (!(IS_ENABLED(CONFIG_SPL_BUILD) &&
+	      IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) &&
+	      spl_boot_device() == BOOT_DEVICE_UART))
+		printf("Authentication passed\n");
+}
diff --git a/roms/u-boot/arch/arm/mach-k3/sysfw-loader.c b/roms/u-boot/arch/arm/mach-k3/sysfw-loader.c
new file mode 100644
index 000000000..0bacfc4d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-k3/sysfw-loader.c
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * K3: System Firmware Loader
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andreas Dannenberg <dannenberg@ti.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <image.h>
+#include <log.h>
+#include <spl.h>
+#include <malloc.h>
+#include <remoteproc.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <g_dnl.h>
+#include <usb.h>
+#include <dfu.h>
+#include <dm/uclass-internal.h>
+#include <spi_flash.h>
+
+#include <asm/arch/sys_proto.h>
+#include "common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Name of the FIT image nodes for SYSFW and its config data */
+#define SYSFW_FIRMWARE			"sysfw.bin"
+#define SYSFW_CFG_BOARD			"board-cfg.bin"
+#define SYSFW_CFG_PM			"pm-cfg.bin"
+#define SYSFW_CFG_RM			"rm-cfg.bin"
+#define SYSFW_CFG_SEC			"sec-cfg.bin"
+
+/*
+ * It is assumed that remoteproc device 0 is the corresponding
+ * system-controller that runs SYSFW. Make sure DT reflects the same.
+ */
+#define K3_SYSTEM_CONTROLLER_RPROC_ID	0
+
+static bool sysfw_loaded;
+static void *sysfw_load_address;
+
+/*
+ * Populate SPL hook to override the default load address used by the SPL
+ * loader function with a custom address for SYSFW loading.
+ */
+struct image_header *spl_get_load_buffer(ssize_t offset, size_t size)
+{
+	if (sysfw_loaded)
+		return (struct image_header *)(CONFIG_SYS_TEXT_BASE + offset);
+	else if (sysfw_load_address)
+		return sysfw_load_address;
+	else
+		panic("SYSFW load address not defined!");
+}
+
+/*
+ * Populate SPL hook to skip the default SPL loader FIT post-processing steps
+ * during SYSFW loading and return to the calling function so we can perform
+ * our own custom processing.
+ */
+bool spl_load_simple_fit_skip_processing(void)
+{
+	return !sysfw_loaded;
+}
+
+static int fit_get_data_by_name(const void *fit, int images, const char *name,
+				const void **addr, size_t *size)
+{
+	int node_offset;
+
+	node_offset = fdt_subnode_offset(fit, images, name);
+	if (node_offset < 0)
+		return -ENOENT;
+
+	return fit_image_get_data(fit, node_offset, addr, size);
+}
+
+static void k3_start_system_controller(int rproc_id, bool rproc_loaded,
+				       ulong addr, ulong size)
+{
+	int ret;
+
+	ret = rproc_dev_init(rproc_id);
+	if (ret)
+		panic("rproc failed to be initialized (%d)\n", ret);
+
+	if (!rproc_loaded) {
+		ret = rproc_load(rproc_id, addr, size);
+		if (ret)
+			panic("Firmware failed to start on rproc (%d)\n", ret);
+	}
+
+	ret = rproc_start(0);
+	if (ret)
+		panic("Firmware init failed on rproc (%d)\n", ret);
+}
+
+static void k3_sysfw_load_using_fit(void *fit)
+{
+	int images;
+	const void *sysfw_addr;
+	size_t sysfw_size;
+	int ret;
+
+	/* Find the node holding the images information */
+	images = fdt_path_offset(fit, FIT_IMAGES_PATH);
+	if (images < 0)
+		panic("Cannot find /images node (%d)\n", images);
+
+	/* Extract System Firmware (SYSFW) image from FIT */
+	ret = fit_get_data_by_name(fit, images, SYSFW_FIRMWARE,
+				   &sysfw_addr, &sysfw_size);
+	if (ret < 0)
+		panic("Error accessing %s node in FIT (%d)\n", SYSFW_FIRMWARE,
+		      ret);
+
+	/* Start up system controller firmware */
+	k3_start_system_controller(K3_SYSTEM_CONTROLLER_RPROC_ID, false,
+				   (ulong)sysfw_addr, (ulong)sysfw_size);
+}
+
+static void k3_sysfw_configure_using_fit(void *fit,
+					 struct ti_sci_handle *ti_sci)
+{
+	struct ti_sci_board_ops *board_ops = &ti_sci->ops.board_ops;
+	int images;
+	const void *cfg_fragment_addr;
+	size_t cfg_fragment_size;
+	int ret;
+
+	/* Find the node holding the images information */
+	images = fdt_path_offset(fit, FIT_IMAGES_PATH);
+	if (images < 0)
+		panic("Cannot find /images node (%d)\n", images);
+
+	/* Extract board configuration from FIT */
+	ret = fit_get_data_by_name(fit, images, SYSFW_CFG_BOARD,
+				   &cfg_fragment_addr, &cfg_fragment_size);
+	if (ret < 0)
+		panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_BOARD,
+		      ret);
+
+	/* Apply board configuration to SYSFW */
+	ret = board_ops->board_config(ti_sci,
+				      (u64)(u32)cfg_fragment_addr,
+				      (u32)cfg_fragment_size);
+	if (ret)
+		panic("Failed to set board configuration (%d)\n", ret);
+
+	/* Extract power/clock (PM) specific configuration from FIT */
+	ret = fit_get_data_by_name(fit, images, SYSFW_CFG_PM,
+				   &cfg_fragment_addr, &cfg_fragment_size);
+	if (ret < 0)
+		panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_PM,
+		      ret);
+
+	/* Apply power/clock (PM) specific configuration to SYSFW */
+	ret = board_ops->board_config_pm(ti_sci,
+					 (u64)(u32)cfg_fragment_addr,
+					 (u32)cfg_fragment_size);
+	if (ret)
+		panic("Failed to set board PM configuration (%d)\n", ret);
+
+	/* Extract resource management (RM) specific configuration from FIT */
+	ret = fit_get_data_by_name(fit, images, SYSFW_CFG_RM,
+				   &cfg_fragment_addr, &cfg_fragment_size);
+	if (ret < 0)
+		panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_RM,
+		      ret);
+
+	/* Apply resource management (RM) configuration to SYSFW */
+	ret = board_ops->board_config_rm(ti_sci,
+					 (u64)(u32)cfg_fragment_addr,
+					 (u32)cfg_fragment_size);
+	if (ret)
+		panic("Failed to set board RM configuration (%d)\n", ret);
+
+	/* Extract security specific configuration from FIT */
+	ret = fit_get_data_by_name(fit, images, SYSFW_CFG_SEC,
+				   &cfg_fragment_addr, &cfg_fragment_size);
+	if (ret < 0)
+		panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_SEC,
+		      ret);
+
+	/* Apply security configuration to SYSFW */
+	ret = board_ops->board_config_security(ti_sci,
+					       (u64)(u32)cfg_fragment_addr,
+					       (u32)cfg_fragment_size);
+	if (ret)
+		panic("Failed to set board security configuration (%d)\n",
+		      ret);
+}
+
+#if CONFIG_IS_ENABLED(DFU)
+static int k3_sysfw_dfu_download(void *addr)
+{
+	char dfu_str[50];
+	int ret;
+
+	sprintf(dfu_str, "sysfw.itb ram 0x%p 0x%x", addr,
+		CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
+	ret = dfu_config_entities(dfu_str, "ram", "0");
+	if (ret) {
+		dfu_free_entities();
+		goto exit;
+	}
+
+	run_usb_dnl_gadget(0, "usb_dnl_dfu");
+exit:
+	dfu_free_entities();
+	return ret;
+}
+#endif
+
+#if CONFIG_IS_ENABLED(SPI_LOAD)
+static void *k3_sysfw_get_spi_addr(void)
+{
+	struct udevice *dev;
+	fdt_addr_t addr;
+	int ret;
+
+	ret = uclass_find_device_by_seq(UCLASS_SPI, CONFIG_SF_DEFAULT_BUS,
+					&dev);
+	if (ret)
+		return NULL;
+
+	addr = dev_read_addr_index(dev, 1);
+	if (addr == FDT_ADDR_T_NONE)
+		return NULL;
+
+	return (void *)(addr + CONFIG_K3_SYSFW_IMAGE_SPI_OFFS);
+}
+#endif
+
+void k3_sysfw_loader(bool rom_loaded_sysfw,
+		     void (*config_pm_pre_callback)(void),
+		     void (*config_pm_done_callback)(void))
+{
+	struct spl_image_info spl_image = { 0 };
+	struct spl_boot_device bootdev = { 0 };
+	struct ti_sci_handle *ti_sci;
+	int ret = 0;
+
+	if (rom_loaded_sysfw) {
+		k3_start_system_controller(K3_SYSTEM_CONTROLLER_RPROC_ID,
+					   rom_loaded_sysfw, 0, 0);
+		sysfw_loaded = true;
+		return;
+	}
+
+	/* Reserve a block of aligned memory for loading the SYSFW image */
+	sysfw_load_address = memalign(ARCH_DMA_MINALIGN,
+				      CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
+	if (!sysfw_load_address)
+		panic("Error allocating %u bytes of memory for SYSFW image\n",
+		      CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
+
+	debug("%s: allocated %u bytes at 0x%p\n", __func__,
+	      CONFIG_K3_SYSFW_IMAGE_SIZE_MAX, sysfw_load_address);
+
+	/* Set load address for legacy modes that bypass spl_get_load_buffer */
+	spl_image.load_addr = (uintptr_t)sysfw_load_address;
+
+	bootdev.boot_device = spl_boot_device();
+
+	/* Load combined System Controller firmware and config data image */
+	switch (bootdev.boot_device) {
+#if CONFIG_IS_ENABLED(MMC_SUPPORT)
+	case BOOT_DEVICE_MMC1:
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		ret = spl_mmc_load(&spl_image, &bootdev,
+#ifdef CONFIG_K3_SYSFW_IMAGE_NAME
+				   CONFIG_K3_SYSFW_IMAGE_NAME,
+#else
+				   NULL,
+#endif
+#ifdef CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
+				   CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART,
+#else
+				   0,
+#endif
+#ifdef CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT
+				   CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT);
+#else
+				   0);
+#endif
+		break;
+#endif
+#if CONFIG_IS_ENABLED(SPI_LOAD)
+	case BOOT_DEVICE_SPI:
+		sysfw_load_address = k3_sysfw_get_spi_addr();
+		if (!sysfw_load_address)
+			ret = -ENODEV;
+		break;
+#endif
+#if CONFIG_IS_ENABLED(YMODEM_SUPPORT)
+	case BOOT_DEVICE_UART:
+#ifdef CONFIG_K3_EARLY_CONS
+		/*
+		 * Establish a serial console if not yet available as required
+		 * for UART-based boot. For this use the early console feature
+		 * that allows setting up a UART for use before SYSFW has been
+		 * brought up. Note that the associated UART module's clocks
+		 * must have gotten enabled by the ROM bootcode which will be
+		 * the case when continuing to boot serially from the same
+		 * UART that the ROM loaded the initial bootloader from.
+		 */
+		if (!gd->have_console)
+			early_console_init();
+#endif
+		ret = spl_ymodem_load_image(&spl_image, &bootdev);
+		break;
+#endif
+#if CONFIG_IS_ENABLED(DFU)
+	case BOOT_DEVICE_DFU:
+		ret = k3_sysfw_dfu_download(sysfw_load_address);
+		break;
+#endif
+#if CONFIG_IS_ENABLED(USB_STORAGE)
+	case BOOT_DEVICE_USB:
+		ret = spl_usb_load(&spl_image, &bootdev,
+				   CONFIG_SYS_USB_FAT_BOOT_PARTITION,
+#ifdef CONFIG_K3_SYSFW_IMAGE_NAME
+				   CONFIG_K3_SYSFW_IMAGE_NAME);
+#else
+				   NULL);
+#endif
+#endif
+		break;
+	default:
+		panic("Loading SYSFW image from device %u not supported!\n",
+		      bootdev.boot_device);
+	}
+
+	if (ret)
+		panic("Error %d occurred during loading SYSFW image!\n", ret);
+
+	/*
+	 * Now that SYSFW got loaded set helper flag to restore regular SPL
+	 * loader behavior so we can later boot into the next stage as expected.
+	 */
+	sysfw_loaded = true;
+
+	/* Ensure the SYSFW image is in FIT format */
+	if (image_get_magic((const image_header_t *)sysfw_load_address) !=
+	    FDT_MAGIC)
+		panic("SYSFW image not in FIT format!\n");
+
+	/* Extract and start SYSFW */
+	k3_sysfw_load_using_fit(sysfw_load_address);
+
+	/* Get handle for accessing SYSFW services */
+	ti_sci = get_ti_sci_handle();
+
+	if (config_pm_pre_callback)
+		config_pm_pre_callback();
+
+	/* Parse and apply the different SYSFW configuration fragments */
+	k3_sysfw_configure_using_fit(sysfw_load_address, ti_sci);
+
+	/*
+	 * Now that all clocks and PM aspects are setup, invoke a user-
+	 * provided callback function. Usually this callback would be used
+	 * to setup or re-configure the U-Boot console UART.
+	 */
+	if (config_pm_done_callback)
+		config_pm_done_callback();
+}
diff --git a/roms/u-boot/arch/arm/mach-keystone/Kconfig b/roms/u-boot/arch/arm/mach-keystone/Kconfig
new file mode 100644
index 000000000..e06eba5ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/Kconfig
@@ -0,0 +1,48 @@
+if ARCH_KEYSTONE
+
+choice
+	prompt "TI Keystone board select"
+	optional
+
+config TARGET_K2HK_EVM
+	bool "TI Keystone 2 Kepler/Hawking EVM"
+	select SPL_BOARD_INIT if SPL
+	select CMD_DDR3
+	imply DM_I2C
+	imply SOC_TI
+	imply TI_KEYSTONE_SERDES
+
+config TARGET_K2E_EVM
+	bool "TI Keystone 2 Edison EVM"
+	select SPL_BOARD_INIT if SPL
+	select CMD_DDR3
+	imply DM_I2C
+	imply SOC_TI
+	imply TI_KEYSTONE_SERDES
+
+config TARGET_K2L_EVM
+	bool "TI Keystone 2 Lamar EVM"
+	select SPL_BOARD_INIT if SPL
+	select CMD_DDR3
+	imply DM_I2C
+	imply SOC_TI
+	imply TI_KEYSTONE_SERDES
+
+config TARGET_K2G_EVM
+	bool "TI Keystone 2 Galileo EVM"
+        select BOARD_LATE_INIT
+	select SPL_BOARD_INIT if SPL
+        select TI_I2C_BOARD_DETECT
+	select CMD_DDR3
+	imply DM_I2C
+	imply SOC_TI
+	imply TI_KEYSTONE_SERDES
+
+endchoice
+
+config SYS_SOC
+	default "keystone"
+
+source "board/ti/ks2_evm/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/Makefile b/roms/u-boot/arch/arm/mach-keystone/Makefile
new file mode 100644
index 000000000..6c7c25090
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/Makefile
@@ -0,0 +1,22 @@
+#
+# (C) Copyright 2012-2014
+#     Texas Instruments Incorporated, <www.ti.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	+= init.o
+obj-y	+= psc.o
+obj-y	+= clock.o
+obj-y	+= mon.o
+CFLAGS_REMOVE_mon.o := $(LTO_CFLAGS)
+ifndef CONFIG_SPL_BUILD
+obj-y	+= cmd_clock.o
+obj-y	+= cmd_mon.o
+obj-y	+= cmd_poweroff.o
+endif
+obj-y	+= msmc.o
+obj-y	+= ddr3.o
+obj-y	+= keystone.o
+obj-$(CONFIG_TARGET_K2E_EVM) += ddr3_spd.o
+obj-$(CONFIG_TARGET_K2HK_EVM) += ddr3_spd.o
diff --git a/roms/u-boot/arch/arm/mach-keystone/clock.c b/roms/u-boot/arch/arm/mach-keystone/clock.c
new file mode 100644
index 000000000..0c59515d2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/clock.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Keystone2: pll initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clock_defs.h>
+#include <linux/bitops.h>
+
+/* DEV and ARM speed definitions as specified in DEVSPEED register */
+int __weak speeds[DEVSPEED_NUMSPDS] = {
+	SPD1000,
+	SPD1200,
+	SPD1350,
+	SPD1400,
+	SPD1500,
+	SPD1400,
+	SPD1350,
+	SPD1200,
+	SPD1000,
+	SPD800,
+};
+
+const struct keystone_pll_regs keystone_pll_regs[] = {
+	[CORE_PLL]	= {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1},
+	[PASS_PLL]	= {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1},
+	[TETRIS_PLL]	= {KS2_ARMPLLCTL0, KS2_ARMPLLCTL1},
+	[DDR3A_PLL]	= {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
+	[DDR3B_PLL]	= {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
+	[UART_PLL]	= {KS2_UARTPLLCTL0, KS2_UARTPLLCTL1},
+};
+
+inline void pll_pa_clk_sel(void)
+{
+	setbits_le32(keystone_pll_regs[PASS_PLL].reg1, CFG_PLLCTL1_PAPLL_MASK);
+}
+
+static void wait_for_completion(const struct pll_init_data *data)
+{
+	int i;
+	for (i = 0; i < 100; i++) {
+		sdelay(450);
+		if (!(pllctl_reg_read(data->pll, stat) & PLLSTAT_GOSTAT_MASK))
+			break;
+	}
+}
+
+static inline void bypass_main_pll(const struct pll_init_data *data)
+{
+	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC_MASK |
+			   PLLCTL_PLLEN_MASK);
+
+	/* 4 cycles of reference clock CLKIN*/
+	sdelay(340);
+}
+
+static void configure_mult_div(const struct pll_init_data *data)
+{
+	u32 pllm, plld, bwadj;
+
+	pllm = data->pll_m - 1;
+	plld = (data->pll_d - 1) & CFG_PLLCTL0_PLLD_MASK;
+
+	/* Program Multiplier */
+	if (data->pll == MAIN_PLL)
+		pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);
+
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+			CFG_PLLCTL0_PLLM_MASK,
+			pllm << CFG_PLLCTL0_PLLM_SHIFT);
+
+	/* Program BWADJ */
+	bwadj = (data->pll_m - 1) >> 1; /* Divide pllm by 2 */
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+			CFG_PLLCTL0_BWADJ_MASK,
+			(bwadj << CFG_PLLCTL0_BWADJ_SHIFT) &
+			CFG_PLLCTL0_BWADJ_MASK);
+	bwadj = bwadj >> CFG_PLLCTL0_BWADJ_BITS;
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg1,
+			CFG_PLLCTL1_BWADJ_MASK, bwadj);
+
+	/* Program Divider */
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+			CFG_PLLCTL0_PLLD_MASK, plld);
+}
+
+void configure_main_pll(const struct pll_init_data *data)
+{
+	u32 tmp, pllod, i, alnctl_val = 0;
+	u32 *offset;
+
+	pllod = data->pll_od - 1;
+
+	/* 100 micro sec for stabilization */
+	sdelay(210000);
+
+	tmp = pllctl_reg_read(data->pll, secctl);
+
+	/* Check for Bypass */
+	if (tmp & SECCTL_BYPASS_MASK) {
+		setbits_le32(keystone_pll_regs[data->pll].reg1,
+			     CFG_PLLCTL1_ENSAT_MASK);
+
+		bypass_main_pll(data);
+
+		/* Powerdown and powerup Main Pll */
+		pllctl_reg_setbits(data->pll, secctl, SECCTL_BYPASS_MASK);
+		pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
+		/* 5 micro sec */
+		sdelay(21000);
+
+		pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
+	} else {
+		bypass_main_pll(data);
+	}
+
+	configure_mult_div(data);
+
+	/* Program Output Divider */
+	pllctl_reg_rmw(data->pll, secctl, SECCTL_OP_DIV_MASK,
+		       ((pllod << SECCTL_OP_DIV_SHIFT) & SECCTL_OP_DIV_MASK));
+
+	/* Program PLLDIVn */
+	wait_for_completion(data);
+	for (i = 0; i < PLLDIV_MAX; i++) {
+		if (i < 3)
+			offset = pllctl_reg(data->pll, div1) + i;
+		else
+			offset = pllctl_reg(data->pll, div4) + (i - 3);
+
+		if (divn_val[i] != -1) {
+			__raw_writel(divn_val[i] | PLLDIV_ENABLE_MASK, offset);
+			alnctl_val |= BIT(i);
+		}
+	}
+
+	if (alnctl_val) {
+		pllctl_reg_setbits(data->pll, alnctl, alnctl_val);
+		/*
+		 * Set GOSET bit in PLLCMD to initiate the GO operation
+		 * to change the divide
+		 */
+		pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GOSTAT_MASK);
+		wait_for_completion(data);
+	}
+
+	/* Reset PLL */
+	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
+	sdelay(21000);	/* Wait for a minimum of 7 us*/
+	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
+	sdelay(105000);	/* Wait for PLL Lock time (min 50 us) */
+
+	/* Enable PLL */
+	pllctl_reg_clrbits(data->pll, secctl, SECCTL_BYPASS_MASK);
+	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN_MASK);
+}
+
+void configure_secondary_pll(const struct pll_init_data *data)
+{
+	int pllod = data->pll_od - 1;
+
+	/* Enable Glitch free bypass for ARM PLL */
+	if (cpu_is_k2hk() && data->pll == TETRIS_PLL)
+		clrbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);
+
+	/* Enable Bypass mode */
+	setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_ENSAT_MASK);
+	setbits_le32(keystone_pll_regs[data->pll].reg0,
+		     CFG_PLLCTL0_BYPASS_MASK);
+
+	configure_mult_div(data);
+
+	/* Program Output Divider */
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+			CFG_PLLCTL0_CLKOD_MASK,
+			(pllod << CFG_PLLCTL0_CLKOD_SHIFT) &
+			CFG_PLLCTL0_CLKOD_MASK);
+
+	/* Reset PLL */
+	setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
+	/* Wait for 5 micro seconds */
+	sdelay(21000);
+
+	/* Select the Output of PASS PLL as input to PASS */
+	if (data->pll == PASS_PLL && cpu_is_k2hk())
+		pll_pa_clk_sel();
+
+	clrbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
+	/* Wait for 500 * REFCLK cucles * (PLLD + 1) */
+	sdelay(105000);
+
+	/* Switch to PLL mode */
+	clrbits_le32(keystone_pll_regs[data->pll].reg0,
+		     CFG_PLLCTL0_BYPASS_MASK);
+
+	/* Select the Output of ARM PLL as input to ARM */
+	if (cpu_is_k2hk() && data->pll == TETRIS_PLL)
+		setbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);
+}
+
+void init_pll(const struct pll_init_data *data)
+{
+	if (data->pll == MAIN_PLL)
+		configure_main_pll(data);
+	else
+		configure_secondary_pll(data);
+
+	/*
+	 * This is required to provide a delay between multiple
+	 * consequent PPL configurations
+	 */
+	sdelay(210000);
+}
+
+void init_plls(void)
+{
+	struct pll_init_data *data;
+	int pll;
+
+	for (pll = MAIN_PLL; pll < MAX_PLL_COUNT; pll++) {
+		data = get_pll_init_data(pll);
+		if (data)
+			init_pll(data);
+	}
+}
+
+static int get_max_speed(u32 val, u32 speed_supported, int *spds)
+{
+	int speed;
+
+	/* Left most setbit gives the speed */
+	for (speed = DEVSPEED_NUMSPDS; speed >= 0; speed--) {
+		if ((val & BIT(speed)) & speed_supported)
+			return spds[speed];
+	}
+
+	/* If no bit is set, return minimum speed */
+	if (cpu_is_k2g())
+		return SPD200;
+	else
+		return SPD800;
+}
+
+static inline u32 read_efuse_bootrom(void)
+{
+	if (cpu_is_k2hk() && (cpu_revision() <= 1))
+		return __raw_readl(KS2_REV1_DEVSPEED);
+	else
+		return __raw_readl(KS2_EFUSE_BOOTROM);
+}
+
+int get_max_arm_speed(int *spds)
+{
+	u32 armspeed = read_efuse_bootrom();
+
+	armspeed = (armspeed & DEVSPEED_ARMSPEED_MASK) >>
+		    DEVSPEED_ARMSPEED_SHIFT;
+
+	return get_max_speed(armspeed, ARM_SUPPORTED_SPEEDS, spds);
+}
+
+int get_max_dev_speed(int *spds)
+{
+	u32 devspeed = read_efuse_bootrom();
+
+	devspeed = (devspeed & DEVSPEED_DEVSPEED_MASK) >>
+		    DEVSPEED_DEVSPEED_SHIFT;
+
+	return get_max_speed(devspeed, DEV_SUPPORTED_SPEEDS, spds);
+}
+
+/**
+ * pll_freq_get - get pll frequency
+ * @pll:	pll identifier
+ */
+static unsigned long pll_freq_get(int pll)
+{
+	unsigned long mult = 1, prediv = 1, output_div = 2;
+	unsigned long ret;
+	u32 tmp, reg;
+
+	if (pll == MAIN_PLL) {
+		ret = get_external_clk(sys_clk);
+		if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN_MASK) {
+			/* PLL mode */
+			tmp = __raw_readl(KS2_MAINPLLCTL0);
+			prediv = (tmp & CFG_PLLCTL0_PLLD_MASK) + 1;
+			mult = ((tmp & CFG_PLLCTL0_PLLM_HI_MASK) >>
+				CFG_PLLCTL0_PLLM_SHIFT |
+				(pllctl_reg_read(pll, mult) &
+				 PLLM_MULT_LO_MASK)) + 1;
+			output_div = ((pllctl_reg_read(pll, secctl) &
+				       SECCTL_OP_DIV_MASK) >>
+				       SECCTL_OP_DIV_SHIFT) + 1;
+
+			ret = ret / prediv / output_div * mult;
+		}
+	} else {
+		switch (pll) {
+		case PASS_PLL:
+			ret = get_external_clk(pa_clk);
+			reg = KS2_PASSPLLCTL0;
+			break;
+		case TETRIS_PLL:
+			ret = get_external_clk(tetris_clk);
+			reg = KS2_ARMPLLCTL0;
+			break;
+		case DDR3A_PLL:
+			ret = get_external_clk(ddr3a_clk);
+			reg = KS2_DDR3APLLCTL0;
+			break;
+		case DDR3B_PLL:
+			ret = get_external_clk(ddr3b_clk);
+			reg = KS2_DDR3BPLLCTL0;
+			break;
+		case UART_PLL:
+			ret = get_external_clk(uart_clk);
+			reg = KS2_UARTPLLCTL0;
+			break;
+		default:
+			return 0;
+		}
+
+		tmp = __raw_readl(reg);
+
+		if (!(tmp & CFG_PLLCTL0_BYPASS_MASK)) {
+			/* Bypass disabled */
+			prediv = (tmp & CFG_PLLCTL0_PLLD_MASK) + 1;
+			mult = ((tmp & CFG_PLLCTL0_PLLM_MASK) >>
+				CFG_PLLCTL0_PLLM_SHIFT) + 1;
+			output_div = ((tmp & CFG_PLLCTL0_CLKOD_MASK) >>
+				      CFG_PLLCTL0_CLKOD_SHIFT) + 1;
+			ret = ((ret / prediv) * mult) / output_div;
+		}
+	}
+
+	return ret;
+}
+
+unsigned long ks_clk_get_rate(unsigned int clk)
+{
+	unsigned long freq = 0;
+
+	switch (clk) {
+	case core_pll_clk:
+		freq = pll_freq_get(CORE_PLL);
+		break;
+	case pass_pll_clk:
+		freq = pll_freq_get(PASS_PLL);
+		break;
+	case tetris_pll_clk:
+		if (!cpu_is_k2e())
+			freq = pll_freq_get(TETRIS_PLL);
+		break;
+	case ddr3a_pll_clk:
+		freq = pll_freq_get(DDR3A_PLL);
+		break;
+	case ddr3b_pll_clk:
+		if (cpu_is_k2hk())
+			freq = pll_freq_get(DDR3B_PLL);
+		break;
+	case uart_pll_clk:
+		if (cpu_is_k2g())
+			freq = pll_freq_get(UART_PLL);
+		break;
+	case sys_clk0_1_clk:
+	case sys_clk0_clk:
+		freq = pll_freq_get(CORE_PLL) / pll0div_read(1);
+		break;
+	case sys_clk1_clk:
+	return pll_freq_get(CORE_PLL) / pll0div_read(2);
+		break;
+	case sys_clk2_clk:
+		freq = pll_freq_get(CORE_PLL) / pll0div_read(3);
+		break;
+	case sys_clk3_clk:
+		freq = pll_freq_get(CORE_PLL) / pll0div_read(4);
+		break;
+	case sys_clk0_2_clk:
+		freq = ks_clk_get_rate(sys_clk0_clk) / 2;
+		break;
+	case sys_clk0_3_clk:
+		freq = ks_clk_get_rate(sys_clk0_clk) / 3;
+		break;
+	case sys_clk0_4_clk:
+		freq = ks_clk_get_rate(sys_clk0_clk) / 4;
+		break;
+	case sys_clk0_6_clk:
+		freq = ks_clk_get_rate(sys_clk0_clk) / 6;
+		break;
+	case sys_clk0_8_clk:
+		freq = ks_clk_get_rate(sys_clk0_clk) / 8;
+		break;
+	case sys_clk0_12_clk:
+		freq = ks_clk_get_rate(sys_clk0_clk) / 12;
+		break;
+	case sys_clk0_24_clk:
+		freq = ks_clk_get_rate(sys_clk0_clk) / 24;
+		break;
+	case sys_clk1_3_clk:
+		freq = ks_clk_get_rate(sys_clk1_clk) / 3;
+		break;
+	case sys_clk1_4_clk:
+		freq = ks_clk_get_rate(sys_clk1_clk) / 4;
+		break;
+	case sys_clk1_6_clk:
+		freq = ks_clk_get_rate(sys_clk1_clk) / 6;
+		break;
+	case sys_clk1_12_clk:
+		freq = ks_clk_get_rate(sys_clk1_clk) / 12;
+		break;
+	default:
+		break;
+	}
+
+	return freq;
+}
diff --git a/roms/u-boot/arch/arm/mach-keystone/cmd_clock.c b/roms/u-boot/arch/arm/mach-keystone/cmd_clock.c
new file mode 100644
index 000000000..7165d666e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/cmd_clock.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * keystone2: commands for clocks
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/psc_defs.h>
+
+struct pll_init_data cmd_pll_data = {
+	.pll = MAIN_PLL,
+	.pll_m = 16,
+	.pll_d = 1,
+	.pll_od = 2,
+};
+
+int do_pll_cmd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	if (argc != 5)
+		goto pll_cmd_usage;
+
+	if (strncmp(argv[1], "pa", 2) == 0)
+		cmd_pll_data.pll = PASS_PLL;
+#ifndef CONFIG_SOC_K2E
+	else if (strncmp(argv[1], "arm", 3) == 0)
+		cmd_pll_data.pll = TETRIS_PLL;
+#endif
+#ifdef CONFIG_SOC_K2HK
+	else if (strncmp(argv[1], "ddr3a", 5) == 0)
+		cmd_pll_data.pll = DDR3A_PLL;
+	else if (strncmp(argv[1], "ddr3b", 5) == 0)
+		cmd_pll_data.pll = DDR3B_PLL;
+#else
+	else if (strncmp(argv[1], "ddr3", 4) == 0)
+		cmd_pll_data.pll = DDR3_PLL;
+#endif
+	else
+		goto pll_cmd_usage;
+
+	cmd_pll_data.pll_m   = simple_strtoul(argv[2], NULL, 10);
+	cmd_pll_data.pll_d   = simple_strtoul(argv[3], NULL, 10);
+	cmd_pll_data.pll_od  = simple_strtoul(argv[4], NULL, 10);
+
+	printf("Trying to set pll %d; mult %d; div %d; OD %d\n",
+	       cmd_pll_data.pll, cmd_pll_data.pll_m,
+	       cmd_pll_data.pll_d, cmd_pll_data.pll_od);
+	init_pll(&cmd_pll_data);
+
+	return 0;
+
+pll_cmd_usage:
+	return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+	pllset, 5,      0,      do_pll_cmd,
+	"set pll multiplier and pre divider",
+	PLLSET_CMD_LIST " <mult> <div> <OD>\n"
+);
+
+int do_getclk_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
+		  char *const argv[])
+{
+	unsigned int clk;
+	unsigned long freq;
+
+	if (argc != 2)
+		goto getclk_cmd_usage;
+
+	clk = simple_strtoul(argv[1], NULL, 10);
+
+	freq = ks_clk_get_rate(clk);
+	if (freq)
+		printf("clock index [%d] - frequency %lu\n", clk, freq);
+	else
+		printf("clock index [%d] Not available\n", clk);
+	return 0;
+
+getclk_cmd_usage:
+	return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+	getclk,	2,	0,	do_getclk_cmd,
+	"get clock rate",
+	"<clk index>\n"
+	"The indexes for clocks:\n"
+	CLOCK_INDEXES_LIST
+);
+
+int do_psc_cmd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	int	psc_module;
+	int	res;
+
+	if (argc != 3)
+		goto psc_cmd_usage;
+
+	psc_module = simple_strtoul(argv[1], NULL, 10);
+	if (strcmp(argv[2], "en") == 0) {
+		res = psc_enable_module(psc_module);
+		printf("psc_enable_module(%d) - %s\n", psc_module,
+		       (res) ? "ERROR" : "OK");
+		return 0;
+	}
+
+	if (strcmp(argv[2], "di") == 0) {
+		res = psc_disable_module(psc_module);
+		printf("psc_disable_module(%d) - %s\n", psc_module,
+		       (res) ? "ERROR" : "OK");
+		return 0;
+	}
+
+	if (strcmp(argv[2], "domain") == 0) {
+		res = psc_disable_domain(psc_module);
+		printf("psc_disable_domain(%d) - %s\n", psc_module,
+		       (res) ? "ERROR" : "OK");
+		return 0;
+	}
+
+psc_cmd_usage:
+	return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(
+	psc,	3,	0,	do_psc_cmd,
+	"<enable/disable psc module os disable domain>",
+	"<mod/domain index> <en|di|domain>\n"
+	"Intended to control Power and Sleep Controller (PSC) domains and\n"
+	"modules. The module or domain index exectly corresponds to ones\n"
+	"listed in official TRM. For instance, to enable MSMC RAM clock\n"
+	"domain use command: psc 14 en.\n"
+);
diff --git a/roms/u-boot/arch/arm/mach-keystone/cmd_mon.c b/roms/u-boot/arch/arm/mach-keystone/cmd_mon.c
new file mode 100644
index 000000000..049d57347
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/cmd_mon.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * K2HK: secure kernel command file
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <image.h>
+#include <mach/mon.h>
+asm(".arch_extension sec\n\t");
+
+static int do_mon_install(struct cmd_tbl *cmdtp, int flag, int argc,
+			  char *const argv[])
+{
+	u32 addr, dpsc_base = 0x1E80000, freq, load_addr, size;
+	int     rcode = 0;
+	struct image_header *header;
+	u32 ecrypt_bm_addr = 0;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	freq = CONFIG_SYS_HZ_CLOCK;
+
+	addr = simple_strtoul(argv[1], NULL, 16);
+
+	header = (struct image_header *)addr;
+
+	if (image_get_magic(header) != IH_MAGIC) {
+		printf("## Please update monitor image\n");
+		return -EFAULT;
+	}
+
+	load_addr = image_get_load(header);
+	size = image_get_data_size(header);
+	memcpy((void *)load_addr, (void *)(addr + sizeof(struct image_header)),
+	       size);
+
+	if (argc >=  3)
+		ecrypt_bm_addr = simple_strtoul(argv[2], NULL, 16);
+
+	rcode = mon_install(load_addr, dpsc_base, freq, ecrypt_bm_addr);
+	printf("## installed monitor @ 0x%x, freq [%d], status %d\n",
+	       load_addr, freq, rcode);
+
+	return 0;
+}
+
+U_BOOT_CMD(mon_install, 3, 0, do_mon_install,
+	   "Install boot kernel at 'addr'",
+	   ""
+);
+
+static void core_spin(void)
+{
+	while (1) {
+		asm volatile (
+			"dsb\n"
+			"isb\n"
+			"wfi\n"
+		);
+	}
+}
+
+int do_mon_power(struct cmd_tbl *cmdtp, int flag, int argc,
+		 char *const argv[])
+{
+	int     rcode = 0, core_id, on;
+	void (*fn)(void);
+
+	fn = core_spin;
+
+	if (argc < 3)
+		return CMD_RET_USAGE;
+
+	core_id = simple_strtoul(argv[1], NULL, 16);
+	on = simple_strtoul(argv[2], NULL, 16);
+
+	if (on)
+		rcode = mon_power_on(core_id, fn);
+	else
+		rcode = mon_power_off(core_id);
+
+	if (on) {
+		if (!rcode)
+			printf("core %d powered on successfully\n", core_id);
+		else
+			printf("core %d power on failure\n", core_id);
+	} else {
+		printf("core %d powered off successfully\n", core_id);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(mon_power, 3, 0, do_mon_power,
+	   "Power On/Off secondary core",
+	   "mon_power <coreid> <oper>\n"
+	   "- coreid (1-3) and oper (1 - ON, 0 - OFF)\n"
+	   ""
+);
diff --git a/roms/u-boot/arch/arm/mach-keystone/cmd_poweroff.c b/roms/u-boot/arch/arm/mach-keystone/cmd_poweroff.c
new file mode 100644
index 000000000..f0ad9173b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/cmd_poweroff.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Keystone EVM : Power off
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/mon.h>
+#include <asm/arch/psc_defs.h>
+#include <asm/arch/hardware.h>
+
+int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	mon_power_off(0);
+
+	psc_disable_module(KS2_LPSC_TETRIS);
+	psc_disable_domain(KS2_TETRIS_PWR_DOMAIN);
+
+	asm volatile ("isb\n"
+		      "dsb\n"
+		      "wfi\n");
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-keystone/config.mk b/roms/u-boot/arch/arm/mach-keystone/config.mk
new file mode 100644
index 000000000..5a16891f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/config.mk
@@ -0,0 +1,34 @@
+# Copyright 2015 Texas Instruments Incorporated, <www.ti.com>
+#
+# Lokesh Vutla <lokeshvutla@ti.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+include  $(srctree)/arch/arm/mach-omap2/config_secure.mk
+
+ifndef CONFIG_SPL_BUILD
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+INPUTS-y += u-boot_HS_MLO
+else
+INPUTS-y += MLO
+endif
+endif
+
+MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
+	-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
+spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+			  --gap-fill=0
+u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
+	$(call if_changed,pad_cat)
+
+ifndef CONFIG_SPL_BUILD
+MKIMAGEFLAGS_MLO = -A $(ARCH) -T gpimage -C none \
+	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot
+MLO: u-boot.bin FORCE
+	$(call if_changed,mkimage)
+	@dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@
+endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/ddr3.c b/roms/u-boot/arch/arm/mach-keystone/ddr3.c
new file mode 100644
index 000000000..9ee328415
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/ddr3.c
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Keystone2: DDR3 initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <cpu_func.h>
+#include <env.h>
+#include <asm/io.h>
+#include <common.h>
+#include <asm/arch/msmc.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/psc_defs.h>
+#include <linux/delay.h>
+
+#include <asm/ti-common/ti-edma3.h>
+
+#define DDR3_EDMA_BLK_SIZE_SHIFT	10
+#define DDR3_EDMA_BLK_SIZE		(1 << DDR3_EDMA_BLK_SIZE_SHIFT)
+#define DDR3_EDMA_BCNT			0x8000
+#define DDR3_EDMA_CCNT			1
+#define DDR3_EDMA_XF_SIZE		(DDR3_EDMA_BLK_SIZE * DDR3_EDMA_BCNT)
+#define DDR3_EDMA_SLOT_NUM		1
+
+void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg)
+{
+	unsigned int tmp;
+
+	while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET)
+		 & 0x00000001) != 0x00000001)
+		;
+
+	__raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET);
+
+	tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET);
+	tmp &= ~(phy_cfg->pgcr1_mask);
+	tmp |= phy_cfg->pgcr1_val;
+	__raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET);
+
+	__raw_writel(phy_cfg->ptr0,   base + KS2_DDRPHY_PTR0_OFFSET);
+	__raw_writel(phy_cfg->ptr1,   base + KS2_DDRPHY_PTR1_OFFSET);
+	__raw_writel(phy_cfg->ptr3,  base + KS2_DDRPHY_PTR3_OFFSET);
+	__raw_writel(phy_cfg->ptr4,  base + KS2_DDRPHY_PTR4_OFFSET);
+
+	tmp =  __raw_readl(base + KS2_DDRPHY_DCR_OFFSET);
+	tmp &= ~(phy_cfg->dcr_mask);
+	tmp |= phy_cfg->dcr_val;
+	__raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET);
+
+	__raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET);
+	__raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET);
+	__raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET);
+	__raw_writel(phy_cfg->mr0,   base + KS2_DDRPHY_MR0_OFFSET);
+	__raw_writel(phy_cfg->mr1,   base + KS2_DDRPHY_MR1_OFFSET);
+	__raw_writel(phy_cfg->mr2,   base + KS2_DDRPHY_MR2_OFFSET);
+	__raw_writel(phy_cfg->dtcr,  base + KS2_DDRPHY_DTCR_OFFSET);
+	__raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET);
+
+	__raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET);
+	__raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET);
+	__raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET);
+
+	__raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET);
+	while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
+		;
+
+	if (cpu_is_k2g()) {
+		clrsetbits_le32(base + KS2_DDRPHY_DATX8_2_OFFSET,
+				phy_cfg->datx8_2_mask,
+				phy_cfg->datx8_2_val);
+
+		clrsetbits_le32(base + KS2_DDRPHY_DATX8_3_OFFSET,
+				phy_cfg->datx8_3_mask,
+				phy_cfg->datx8_3_val);
+
+		clrsetbits_le32(base + KS2_DDRPHY_DATX8_4_OFFSET,
+				phy_cfg->datx8_4_mask,
+				phy_cfg->datx8_4_val);
+
+		clrsetbits_le32(base + KS2_DDRPHY_DATX8_5_OFFSET,
+				phy_cfg->datx8_5_mask,
+				phy_cfg->datx8_5_val);
+
+		clrsetbits_le32(base + KS2_DDRPHY_DATX8_6_OFFSET,
+				phy_cfg->datx8_6_mask,
+				phy_cfg->datx8_6_val);
+
+		clrsetbits_le32(base + KS2_DDRPHY_DATX8_7_OFFSET,
+				phy_cfg->datx8_7_mask,
+				phy_cfg->datx8_7_val);
+
+		clrsetbits_le32(base + KS2_DDRPHY_DATX8_8_OFFSET,
+				phy_cfg->datx8_8_mask,
+				phy_cfg->datx8_8_val);
+	}
+
+	__raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET);
+	while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
+		;
+}
+
+void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg)
+{
+	__raw_writel(emif_cfg->sdcfg,  base + KS2_DDR3_SDCFG_OFFSET);
+	__raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET);
+	__raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET);
+	__raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET);
+	__raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET);
+	__raw_writel(emif_cfg->zqcfg,  base + KS2_DDR3_ZQCFG_OFFSET);
+	__raw_writel(emif_cfg->sdrfc,  base + KS2_DDR3_SDRFC_OFFSET);
+}
+
+int ddr3_ecc_support_rmw(u32 base)
+{
+	u32 value = __raw_readl(base + KS2_DDR3_MIDR_OFFSET);
+
+	/* Check the DDR3 controller ID reg if the controllers
+	   supports ECC RMW or not */
+	if (value == 0x40461C02)
+		return 1;
+
+	return 0;
+}
+
+static void ddr3_ecc_config(u32 base, u32 value)
+{
+	u32 data;
+
+	__raw_writel(value,  base + KS2_DDR3_ECC_CTRL_OFFSET);
+	udelay(100000); /* delay required to synchronize across clock domains */
+
+	if (value & KS2_DDR3_ECC_EN) {
+		/* Clear the 1-bit error count */
+		data = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
+		__raw_writel(data, base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
+
+		/* enable the ECC interrupt */
+		__raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS |
+			     KS2_DDR3_WR_ECC_ERR_SYS,
+			     base + KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET);
+
+		/* Clear the ECC error interrupt status */
+		__raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS |
+			     KS2_DDR3_WR_ECC_ERR_SYS,
+			     base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
+	}
+}
+
+static void ddr3_reset_data(u32 base, u32 ddr3_size)
+{
+	u32 mpax[2];
+	u32 seg_num;
+	u32 seg, blks, dst, edma_blks;
+	struct edma3_slot_config slot;
+	struct edma3_channel_config edma_channel;
+	u32 edma_src[DDR3_EDMA_BLK_SIZE/4] __aligned(16) = {0, };
+
+	/* Setup an edma to copy the 1k block to the entire DDR */
+	puts("\nClear entire DDR3 memory to enable ECC\n");
+
+	/* save the SES MPAX regs */
+	if (cpu_is_k2g())
+		msmc_get_ses_mpax(K2G_MSMC_SEGMENT_ARM, 0, mpax);
+	else
+		msmc_get_ses_mpax(K2HKLE_MSMC_SEGMENT_ARM, 0, mpax);
+
+	/* setup edma slot 1 configuration */
+	slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
+		   EDMA3_SLOPT_COMP_CODE(0) |
+		   EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
+	slot.bcnt = DDR3_EDMA_BCNT;
+	slot.acnt = DDR3_EDMA_BLK_SIZE;
+	slot.ccnt = DDR3_EDMA_CCNT;
+	slot.src_bidx = 0;
+	slot.dst_bidx = DDR3_EDMA_BLK_SIZE;
+	slot.src_cidx = 0;
+	slot.dst_cidx = 0;
+	slot.link = EDMA3_PARSET_NULL_LINK;
+	slot.bcntrld = 0;
+	edma3_slot_configure(KS2_EDMA0_BASE, DDR3_EDMA_SLOT_NUM, &slot);
+
+	/* configure quik edma channel */
+	edma_channel.slot = DDR3_EDMA_SLOT_NUM;
+	edma_channel.chnum = 0;
+	edma_channel.complete_code = 0;
+	/* event trigger after dst update */
+	edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
+	qedma3_start(KS2_EDMA0_BASE, &edma_channel);
+
+	/* DDR3 size in segments (4KB seg size) */
+	seg_num = ddr3_size << (30 - KS2_MSMC_SEG_SIZE_SHIFT);
+
+	for (seg = 0; seg < seg_num; seg += KS2_MSMC_MAP_SEG_NUM) {
+		/* map 2GB 36-bit DDR address to 32-bit DDR address in EMIF
+		   access slave interface so that edma driver can access */
+		if (cpu_is_k2g()) {
+			msmc_map_ses_segment(K2G_MSMC_SEGMENT_ARM, 0,
+					     base >> KS2_MSMC_SEG_SIZE_SHIFT,
+					     KS2_MSMC_DST_SEG_BASE + seg,
+					     MPAX_SEG_2G);
+		} else {
+			msmc_map_ses_segment(K2HKLE_MSMC_SEGMENT_ARM, 0,
+					     base >> KS2_MSMC_SEG_SIZE_SHIFT,
+					     KS2_MSMC_DST_SEG_BASE + seg,
+					     MPAX_SEG_2G);
+		}
+
+		if ((seg_num - seg) > KS2_MSMC_MAP_SEG_NUM)
+			edma_blks = KS2_MSMC_MAP_SEG_NUM <<
+					(KS2_MSMC_SEG_SIZE_SHIFT
+					- DDR3_EDMA_BLK_SIZE_SHIFT);
+		else
+			edma_blks = (seg_num - seg) << (KS2_MSMC_SEG_SIZE_SHIFT
+					- DDR3_EDMA_BLK_SIZE_SHIFT);
+
+		/* Use edma driver to scrub 2GB DDR memory */
+		for (dst = base, blks = 0; blks < edma_blks;
+		     blks += DDR3_EDMA_BCNT, dst += DDR3_EDMA_XF_SIZE) {
+			edma3_set_src_addr(KS2_EDMA0_BASE,
+					   edma_channel.slot, (u32)edma_src);
+			edma3_set_dest_addr(KS2_EDMA0_BASE,
+					    edma_channel.slot, (u32)dst);
+
+			while (edma3_check_for_transfer(KS2_EDMA0_BASE,
+							&edma_channel))
+				udelay(10);
+		}
+	}
+
+	qedma3_stop(KS2_EDMA0_BASE, &edma_channel);
+
+	/* restore the SES MPAX regs */
+	if (cpu_is_k2g())
+		msmc_set_ses_mpax(K2G_MSMC_SEGMENT_ARM, 0, mpax);
+	else
+		msmc_set_ses_mpax(K2HKLE_MSMC_SEGMENT_ARM, 0, mpax);
+}
+
+static void ddr3_ecc_init_range(u32 base)
+{
+	u32 ecc_val = KS2_DDR3_ECC_EN;
+	u32 rmw = ddr3_ecc_support_rmw(base);
+
+	if (rmw)
+		ecc_val |= KS2_DDR3_ECC_RMW_EN;
+
+	__raw_writel(0, base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
+
+	ddr3_ecc_config(base, ecc_val);
+}
+
+void ddr3_enable_ecc(u32 base, int test)
+{
+	u32 ecc_val = KS2_DDR3_ECC_ENABLE;
+	u32 rmw = ddr3_ecc_support_rmw(base);
+
+	if (test)
+		ecc_val |= KS2_DDR3_ECC_ADDR_RNG_1_EN;
+
+	if (!rmw) {
+		if (!test)
+			/* by default, disable ecc when rmw = 0 and no
+			   ecc test */
+			ecc_val = 0;
+	} else {
+		ecc_val |= KS2_DDR3_ECC_RMW_EN;
+	}
+
+	ddr3_ecc_config(base, ecc_val);
+}
+
+void ddr3_disable_ecc(u32 base)
+{
+	ddr3_ecc_config(base, 0);
+}
+
+#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L)
+static void cic_init(u32 base)
+{
+	/* Disable CIC global interrupts */
+	__raw_writel(0, base + KS2_CIC_GLOBAL_ENABLE);
+
+	/* Set to normal mode, no nesting, no priority hold */
+	__raw_writel(0, base + KS2_CIC_CTRL);
+	__raw_writel(0, base + KS2_CIC_HOST_CTRL);
+
+	/* Enable CIC global interrupts */
+	__raw_writel(1, base + KS2_CIC_GLOBAL_ENABLE);
+}
+
+static void cic_map_cic_to_gic(u32 base, u32 chan_num, u32 irq_num)
+{
+	/* Map the system interrupt to a CIC channel */
+	__raw_writeb(chan_num, base + KS2_CIC_CHAN_MAP(0) + irq_num);
+
+	/* Enable CIC system interrupt */
+	__raw_writel(irq_num, base + KS2_CIC_SYS_ENABLE_IDX_SET);
+
+	/* Enable CIC Host interrupt */
+	__raw_writel(chan_num, base + KS2_CIC_HOST_ENABLE_IDX_SET);
+}
+
+static void ddr3_map_ecc_cic2_irq(u32 base)
+{
+	cic_init(base);
+	cic_map_cic_to_gic(base, KS2_CIC2_DDR3_ECC_CHAN_NUM,
+			   KS2_CIC2_DDR3_ECC_IRQ_NUM);
+}
+#endif
+
+void ddr3_init_ecc(u32 base, u32 ddr3_size)
+{
+	if (!ddr3_ecc_support_rmw(base)) {
+		ddr3_disable_ecc(base);
+		return;
+	}
+
+	ddr3_ecc_init_range(base);
+	ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size);
+
+	/* mapping DDR3 ECC system interrupt from CIC2 to GIC */
+#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L)
+	ddr3_map_ecc_cic2_irq(KS2_CIC2_BASE);
+#endif
+	ddr3_enable_ecc(base, 0);
+}
+
+void ddr3_check_ecc_int(u32 base)
+{
+	char *env;
+	int ecc_test = 0;
+	u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
+
+	env = env_get("ecc_test");
+	if (env)
+		ecc_test = simple_strtol(env, NULL, 0);
+
+	if (value & KS2_DDR3_WR_ECC_ERR_SYS)
+		puts("DDR3 ECC write error interrupted\n");
+
+	if (value & KS2_DDR3_2B_ECC_ERR_SYS) {
+		puts("DDR3 ECC 2-bit error interrupted\n");
+
+		if (!ecc_test) {
+			puts("Reseting the device ...\n");
+			reset_cpu();
+		}
+	}
+
+	value = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
+	if (value) {
+		printf("1-bit ECC err count: 0x%x\n", value);
+		value = __raw_readl(base +
+				    KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET);
+		printf("1-bit ECC err address log: 0x%x\n", value);
+	}
+}
+
+void ddr3_reset_ddrphy(void)
+{
+	u32 tmp;
+
+	/* Assert DDR3A  PHY reset */
+	tmp = readl(KS2_DDR3APLLCTL1);
+	tmp |= KS2_DDR3_PLLCTRL_PHY_RESET;
+	writel(tmp, KS2_DDR3APLLCTL1);
+
+	/* wait 10us to catch the reset */
+	udelay(10);
+
+	/* Release DDR3A PHY reset */
+	tmp = readl(KS2_DDR3APLLCTL1);
+	tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET;
+	__raw_writel(tmp, KS2_DDR3APLLCTL1);
+}
+
+#ifdef CONFIG_SOC_K2HK
+/**
+ * ddr3_reset_workaround - reset workaround in case if leveling error
+ * detected for PG 1.0 and 1.1 k2hk SoCs
+ */
+void ddr3_err_reset_workaround(void)
+{
+	unsigned int tmp;
+	unsigned int tmp_a;
+	unsigned int tmp_b;
+
+	/*
+	 * Check for PGSR0 error bits of DDR3 PHY.
+	 * Check for WLERR, QSGERR, WLAERR,
+	 * RDERR, WDERR, REERR, WEERR error to see if they are set or not
+	 */
+	tmp_a = __raw_readl(KS2_DDR3A_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET);
+	tmp_b = __raw_readl(KS2_DDR3B_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET);
+
+	if (((tmp_a & 0x0FE00000) != 0) || ((tmp_b & 0x0FE00000) != 0)) {
+		printf("DDR Leveling Error Detected!\n");
+		printf("DDR3A PGSR0 = 0x%x\n", tmp_a);
+		printf("DDR3B PGSR0 = 0x%x\n", tmp_b);
+
+		/*
+		 * Write Keys to KICK registers to enable writes to registers
+		 * in boot config space
+		 */
+		__raw_writel(KS2_KICK0_MAGIC, KS2_KICK0);
+		__raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
+
+		/*
+		 * Move DDR3A Module out of reset isolation by setting
+		 * MDCTL23[12] = 0
+		 */
+		tmp_a = __raw_readl(KS2_PSC_BASE +
+				    PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A));
+
+		tmp_a = PSC_REG_MDCTL_SET_RESET_ISO(tmp_a, 0);
+		__raw_writel(tmp_a, KS2_PSC_BASE +
+			     PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A));
+
+		/*
+		 * Move DDR3B Module out of reset isolation by setting
+		 * MDCTL24[12] = 0
+		 */
+		tmp_b = __raw_readl(KS2_PSC_BASE +
+				    PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B));
+		tmp_b = PSC_REG_MDCTL_SET_RESET_ISO(tmp_b, 0);
+		__raw_writel(tmp_b, KS2_PSC_BASE +
+			     PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B));
+
+		/*
+		 * Write 0x5A69 Key to RSTCTRL[15:0] to unlock writes
+		 * to RSTCTRL and RSTCFG
+		 */
+		tmp = __raw_readl(KS2_RSTCTRL);
+		tmp &= KS2_RSTCTRL_MASK;
+		tmp |= KS2_RSTCTRL_KEY;
+		__raw_writel(tmp, KS2_RSTCTRL);
+
+		/*
+		 * Set PLL Controller to drive hard reset on SW trigger by
+		 * setting RSTCFG[13] = 0
+		 */
+		tmp = __raw_readl(KS2_RSTCTRL_RSCFG);
+		tmp &= ~KS2_RSTYPE_PLL_SOFT;
+		__raw_writel(tmp, KS2_RSTCTRL_RSCFG);
+
+		reset_cpu();
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/ddr3_spd.c b/roms/u-boot/arch/arm/mach-keystone/ddr3_spd.c
new file mode 100644
index 000000000..c4a1908af
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/ddr3_spd.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Keystone2: DDR3 SPD configuration
+ *
+ * (C) Copyright 2015-2016 Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <log.h>
+
+#include <i2c.h>
+#include <ddr_spd.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
+
+#define DUMP_DDR_CONFIG			0	/* set to 1 to debug */
+#define debug_ddr_cfg(fmt, args...)					\
+		   debug_cond(DUMP_DDR_CONFIG, fmt, ##args)
+
+static void dump_phy_config(struct ddr3_phy_config *ptr)
+{
+	debug_ddr_cfg("\npllcr		0x%08X\n", ptr->pllcr);
+	debug_ddr_cfg("pgcr1_mask	0x%08X\n", ptr->pgcr1_mask);
+	debug_ddr_cfg("pgcr1_val	0x%08X\n", ptr->pgcr1_val);
+	debug_ddr_cfg("ptr0		0x%08X\n", ptr->ptr0);
+	debug_ddr_cfg("ptr1		0x%08X\n", ptr->ptr1);
+	debug_ddr_cfg("ptr2		0x%08X\n", ptr->ptr2);
+	debug_ddr_cfg("ptr3		0x%08X\n", ptr->ptr3);
+	debug_ddr_cfg("ptr4		0x%08X\n", ptr->ptr4);
+	debug_ddr_cfg("dcr_mask		0x%08X\n", ptr->dcr_mask);
+	debug_ddr_cfg("dcr_val		0x%08X\n", ptr->dcr_val);
+	debug_ddr_cfg("dtpr0		0x%08X\n", ptr->dtpr0);
+	debug_ddr_cfg("dtpr1		0x%08X\n", ptr->dtpr1);
+	debug_ddr_cfg("dtpr2		0x%08X\n", ptr->dtpr2);
+	debug_ddr_cfg("mr0		0x%08X\n", ptr->mr0);
+	debug_ddr_cfg("mr1		0x%08X\n", ptr->mr1);
+	debug_ddr_cfg("mr2		0x%08X\n", ptr->mr2);
+	debug_ddr_cfg("dtcr		0x%08X\n", ptr->dtcr);
+	debug_ddr_cfg("pgcr2		0x%08X\n", ptr->pgcr2);
+	debug_ddr_cfg("zq0cr1		0x%08X\n", ptr->zq0cr1);
+	debug_ddr_cfg("zq1cr1		0x%08X\n", ptr->zq1cr1);
+	debug_ddr_cfg("zq2cr1		0x%08X\n", ptr->zq2cr1);
+	debug_ddr_cfg("pir_v1		0x%08X\n", ptr->pir_v1);
+	debug_ddr_cfg("pir_v2		0x%08X\n\n", ptr->pir_v2);
+};
+
+static void dump_emif_config(struct ddr3_emif_config *ptr)
+{
+	debug_ddr_cfg("\nsdcfg		0x%08X\n", ptr->sdcfg);
+	debug_ddr_cfg("sdtim1		0x%08X\n", ptr->sdtim1);
+	debug_ddr_cfg("sdtim2		0x%08X\n", ptr->sdtim2);
+	debug_ddr_cfg("sdtim3		0x%08X\n", ptr->sdtim3);
+	debug_ddr_cfg("sdtim4		0x%08X\n", ptr->sdtim4);
+	debug_ddr_cfg("zqcfg		0x%08X\n", ptr->zqcfg);
+	debug_ddr_cfg("sdrfc		0x%08X\n\n", ptr->sdrfc);
+};
+
+#define TEMP NORMAL_TEMP
+#define VBUS_CLKPERIOD 1.875 /* Corresponds to vbus=533MHz, */
+#define PLLGS_VAL	(4000.0 / VBUS_CLKPERIOD) /* 4 us */
+#define PLLPD_VAL	(1000.0 / VBUS_CLKPERIOD) /* 1 us */
+#define PLLLOCK_VAL	(100000.0 / VBUS_CLKPERIOD) /* 100 us */
+#define PLLRST_VAL	(9000.0 / VBUS_CLKPERIOD) /* 9 us */
+#define PHYRST_VAL	0x10
+#define DDR_TERM RZQ_4_TERM
+#define SDRAM_DRIVE RZQ_7_IMP
+#define DYN_ODT ODT_DISABLE
+
+enum srt {
+	NORMAL_TEMP,
+	EXTENDED_TEMP
+};
+
+enum out_impedance {
+	RZQ_6_IMP = 0,
+	RZQ_7_IMP
+};
+
+enum die_term {
+	ODT_DISABLE = 0,
+	RZQ_4_TERM,
+	RZQ_2_TERM,
+	RZQ_6_TERM,
+	RZQ_12_TERM,
+	RZQ_8_TERM
+};
+
+struct ddr3_sodimm {
+	u32 t_ck;
+	u32 freqsel;
+	u32 t_xp;
+	u32 t_cke;
+	u32 t_pllpd;
+	u32 t_pllgs;
+	u32 t_phyrst;
+	u32 t_plllock;
+	u32 t_pllrst;
+	u32 t_rfc;
+	u32 t_xs;
+	u32 t_dinit0;
+	u32 t_dinit1;
+	u32 t_dinit2;
+	u32 t_dinit3;
+	u32 t_rtp;
+	u32 t_wtr;
+	u32 t_rp;
+	u32 t_rcd;
+	u32 t_ras;
+	u32 t_rrd;
+	u32 t_rc;
+	u32 t_faw;
+	u32 t_mrd;
+	u32 t_mod;
+	u32 t_wlo;
+	u32 t_wlmrd;
+	u32 t_xsdll;
+	u32 t_xpdll;
+	u32 t_ckesr;
+	u32 t_dllk;
+	u32 t_wr;
+	u32 t_wr_bin;
+	u32 cas;
+	u32 cwl;
+	u32 asr;
+	u32 pasr;
+	u32 t_refprd;
+	u8 sdram_type;
+	u8 ibank;
+	u8 pagesize;
+	u8 t_rrd2;
+	u8 t_ras_max;
+	u8 t_zqcs;
+	u32 refresh_rate;
+	u8 t_csta;
+
+	u8 rank;
+	u8 mirrored;
+	u8 buswidth;
+};
+
+static u8 cas_latancy(u16 temp)
+{
+	int loop;
+	u8 cas_bin = 0;
+
+	for (loop = 0; loop < 32; loop += 2, temp >>= 1) {
+		if (temp & 0x0001)
+			cas_bin = (loop > 15) ? loop - 15 : loop;
+	}
+
+	return cas_bin;
+}
+
+static int ddr3_get_size_in_mb(ddr3_spd_eeprom_t *buf)
+{
+	return (((buf->organization & 0x38) >> 3) + 1) *
+		(256 << (buf->density_banks & 0xf));
+}
+
+static int ddrtimingcalculation(ddr3_spd_eeprom_t *buf, struct ddr3_sodimm *spd,
+				struct ddr3_spd_cb *spd_cb)
+{
+	u32 mtb, clk_freq;
+
+	if ((buf->mem_type != 0x0b) ||
+	    ((buf->density_banks & 0x70) != 0x00))
+		return 1;
+
+	spd->sdram_type = 0x03;
+	spd->ibank = 0x03;
+
+	mtb = buf->mtb_dividend * 1000 / buf->mtb_divisor;
+
+	spd->t_ck = buf->tck_min * mtb;
+
+	spd_cb->ddrspdclock = 2000000 / spd->t_ck;
+	clk_freq = spd_cb->ddrspdclock / 2;
+
+	spd->rank = ((buf->organization & 0x38) >> 3) + 1;
+	if (spd->rank > 2)
+		return 1;
+
+	spd->pagesize = (buf->addressing & 0x07) + 1;
+	if (spd->pagesize > 3)
+		return 1;
+
+	spd->buswidth = 8 << (buf->bus_width & 0x7);
+	if ((spd->buswidth < 16) || (spd->buswidth > 64))
+		return 1;
+
+	spd->mirrored = buf->mod_section.unbuffered.addr_mapping & 1;
+
+	printf("DDR3A Speed will be configured for %d Operation.\n",
+	       spd_cb->ddrspdclock);
+	if (spd_cb->ddrspdclock == 1333) {
+		spd->t_xp = ((3 * spd->t_ck) > 6000) ?
+			3 : ((5999 / spd->t_ck) + 1);
+		spd->t_cke = ((3 * spd->t_ck) > 5625) ?
+			3 : ((5624 / spd->t_ck) + 1);
+	} else if (spd_cb->ddrspdclock == 1600) {
+		spd->t_xp = ((3 * spd->t_ck) > 6000) ?
+			3 : ((5999 / spd->t_ck) + 1);
+		spd->t_cke = ((3 * spd->t_ck) > 5000) ?
+			3 : ((4999 / spd->t_ck) + 1);
+	} else {
+		printf("Unsupported DDR3 speed %d\n", spd_cb->ddrspdclock);
+		return 1;
+	}
+
+	spd->t_xpdll = (spd->t_ck > 2400) ? 10 : 24000 / spd->t_ck;
+	spd->t_ckesr = spd->t_cke + 1;
+
+	/* SPD Calculated Values */
+	spd->cas = cas_latancy((buf->caslat_msb << 8) |
+			       buf->caslat_lsb);
+
+	spd->t_wr = (buf->twr_min * mtb) / spd->t_ck;
+	spd->t_wr_bin = (spd->t_wr / 2) & 0x07;
+
+	spd->t_rcd = ((buf->trcd_min * mtb) - 1) / spd->t_ck + 1;
+	spd->t_rrd = ((buf->trrd_min * mtb) - 1) / spd->t_ck + 1;
+	spd->t_rp  = (((buf->trp_min * mtb) - 1) / spd->t_ck) + 1;
+
+	spd->t_ras = (((buf->tras_trc_ext & 0x0f) << 8 | buf->tras_min_lsb) *
+		      mtb) / spd->t_ck;
+
+	spd->t_rc = (((((buf->tras_trc_ext & 0xf0) << 4) | buf->trc_min_lsb) *
+		      mtb) - 1) / spd->t_ck + 1;
+
+	spd->t_rfc = (buf->trfc_min_lsb | (buf->trfc_min_msb << 8)) * mtb /
+		1000;
+	spd->t_wtr = (buf->twtr_min * mtb) / spd->t_ck;
+	spd->t_rtp = (buf->trtp_min * mtb) / spd->t_ck;
+
+	spd->t_xs  = (((spd->t_rfc + 10) * 1000) / spd->t_ck);
+	spd->t_rfc = ((spd->t_rfc * 1000) - 1) / spd->t_ck + 1;
+
+	spd->t_faw = (((buf->tfaw_msb << 8) | buf->tfaw_min) * mtb) / spd->t_ck;
+	spd->t_rrd2 = ((((buf->tfaw_msb << 8) |
+			 buf->tfaw_min) * mtb) / (4 * spd->t_ck)) - 1;
+
+	/* Hard-coded values */
+	spd->t_mrd = 0x00;
+	spd->t_mod = 0x00;
+	spd->t_wlo = 0x0C;
+	spd->t_wlmrd = 0x28;
+	spd->t_xsdll = 0x200;
+	spd->t_ras_max = 0x0F;
+	spd->t_csta = 0x05;
+	spd->t_dllk = 0x200;
+
+	/* CAS Write Latency */
+	if (spd->t_ck >= 2500)
+		spd->cwl = 0;
+	else if (spd->t_ck >= 1875)
+		spd->cwl = 1;
+	else if (spd->t_ck >= 1500)
+		spd->cwl = 2;
+	else if (spd->t_ck >= 1250)
+		spd->cwl = 3;
+	else if (spd->t_ck >= 1071)
+		spd->cwl = 4;
+	else
+		spd->cwl = 5;
+
+	/* SD:RAM Thermal and Refresh Options */
+	spd->asr = (buf->therm_ref_opt & 0x04) >> 2;
+	spd->pasr = (buf->therm_ref_opt & 0x80) >> 7;
+	spd->t_zqcs = 64;
+
+	spd->t_refprd = (TEMP == NORMAL_TEMP) ? 7812500 : 3906250;
+	spd->t_refprd = spd->t_refprd / spd->t_ck;
+
+	spd->refresh_rate = spd->t_refprd;
+	spd->t_refprd = spd->t_refprd * 5;
+
+	/* Set MISC PHY space registers fields */
+	if ((clk_freq / 2) >= 166 && (clk_freq / 2 < 275))
+		spd->freqsel = 0x03;
+	else if ((clk_freq / 2) > 225 && (clk_freq / 2 < 385))
+		spd->freqsel = 0x01;
+	else if ((clk_freq / 2) > 335 && (clk_freq / 2 < 534))
+		spd->freqsel = 0x00;
+
+	spd->t_dinit0 = 500000000 / spd->t_ck; /* CKE low time 500 us */
+	spd->t_dinit1 = spd->t_xs;
+	spd->t_dinit2 = 200000000 / spd->t_ck; /* Reset low time 200 us */
+	/* Time from ZQ initialization command to first command (1 us) */
+	spd->t_dinit3 =  1000000 / spd->t_ck;
+
+	spd->t_pllgs = PLLGS_VAL + 1;
+	spd->t_pllpd = PLLPD_VAL + 1;
+	spd->t_plllock = PLLLOCK_VAL + 1;
+	spd->t_pllrst = PLLRST_VAL;
+	spd->t_phyrst = PHYRST_VAL;
+
+	spd_cb->ddr_size_gbyte = ddr3_get_size_in_mb(buf) / 1024;
+
+	return 0;
+}
+
+static void init_ddr3param(struct ddr3_spd_cb *spd_cb,
+			   struct ddr3_sodimm *spd)
+{
+	spd_cb->phy_cfg.pllcr = (spd->freqsel & 3) << 18 | 0xE << 13;
+	spd_cb->phy_cfg.pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK);
+	spd_cb->phy_cfg.pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23));
+	spd_cb->phy_cfg.ptr0 = ((spd->t_pllpd & 0x7ff) << 21) |
+		((spd->t_pllgs & 0x7fff) << 6) | (spd->t_phyrst & 0x3f);
+	spd_cb->phy_cfg.ptr1 = ((spd->t_plllock & 0xffff) << 16) |
+		(spd->t_pllrst & 0x1fff);
+	spd_cb->phy_cfg.ptr2 = 0;
+	spd_cb->phy_cfg.ptr3 = ((spd->t_dinit1 & 0x1ff) << 20) |
+		(spd->t_dinit0 & 0xfffff);
+	spd_cb->phy_cfg.ptr4 = ((spd->t_dinit3 & 0x3ff) << 18) |
+		(spd->t_dinit2 & 0x3ffff);
+
+	spd_cb->phy_cfg.dcr_mask = PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK;
+	spd_cb->phy_cfg.dcr_val = 1 << 10;
+
+	if (spd->mirrored) {
+		spd_cb->phy_cfg.dcr_mask |= NOSRA_MASK | UDIMM_MASK;
+		spd_cb->phy_cfg.dcr_val |= (1 << 27) | (1 << 29);
+	}
+
+	spd_cb->phy_cfg.dtpr0 = (spd->t_rc & 0x3f) << 26 |
+		(spd->t_rrd & 0xf) << 22 |
+		(spd->t_ras & 0x3f) << 16 | (spd->t_rcd & 0xf) << 12 |
+		(spd->t_rp & 0xf) << 8 | (spd->t_wtr & 0xf) << 4 |
+		(spd->t_rtp & 0xf);
+	spd_cb->phy_cfg.dtpr1 = (spd->t_wlo & 0xf) << 26 |
+		(spd->t_wlmrd & 0x3f) << 20 | (spd->t_rfc & 0x1ff) << 11 |
+		(spd->t_faw & 0x3f) << 5 | (spd->t_mod & 0x7) << 2 |
+		(spd->t_mrd & 0x3);
+
+	spd_cb->phy_cfg.dtpr2 = 0 << 31 | 1 << 30 | 0 << 29 |
+		(spd->t_dllk & 0x3ff) << 19 | (spd->t_ckesr & 0xf) << 15;
+
+	spd_cb->phy_cfg.dtpr2 |= (((spd->t_xp > spd->t_xpdll) ?
+				   spd->t_xp : spd->t_xpdll) &
+				  0x1f) << 10;
+
+	spd_cb->phy_cfg.dtpr2 |= (((spd->t_xs > spd->t_xsdll) ?
+			      spd->t_xs : spd->t_xsdll) &
+			     0x3ff);
+
+	spd_cb->phy_cfg.mr0 = 1 << 12 | (spd->t_wr_bin & 0x7) << 9 | 0 << 8 |
+		0 << 7 | ((spd->cas & 0x0E) >> 1) << 4 | 0 << 3 |
+		(spd->cas & 0x01) << 2;
+
+	spd_cb->phy_cfg.mr1 = 0 << 12 | 0 << 11 | 0 << 7 | 0 << 3 |
+		((DDR_TERM >> 2) & 1) << 9 | ((DDR_TERM >> 1) & 1) << 6 |
+		(DDR_TERM & 0x1) << 2 | ((SDRAM_DRIVE >> 1) & 1) << 5 |
+		(SDRAM_DRIVE & 1) << 1 | 0 << 0;
+
+	spd_cb->phy_cfg.mr2 = DYN_ODT << 9 | TEMP << 7 | (spd->asr & 1) << 6 |
+		(spd->cwl & 7) << 3 | (spd->pasr & 7);
+
+	spd_cb->phy_cfg.dtcr = (spd->rank == 2) ? 0x730035C7 : 0x710035C7;
+	spd_cb->phy_cfg.pgcr2 = (0xF << 20) | ((int)spd->t_refprd & 0x3ffff);
+
+	spd_cb->phy_cfg.zq0cr1 = 0x0000005D;
+	spd_cb->phy_cfg.zq1cr1 = 0x0000005B;
+	spd_cb->phy_cfg.zq2cr1 = 0x0000005B;
+
+	spd_cb->phy_cfg.pir_v1 = 0x00000033;
+	spd_cb->phy_cfg.pir_v2 = 0x0000FF81;
+
+	/* EMIF Registers */
+	spd_cb->emif_cfg.sdcfg = spd->sdram_type << 29 | (DDR_TERM & 7) << 25 |
+		(DYN_ODT & 3) << 22 | (spd->cwl & 0x7) << 14 |
+		(spd->cas & 0xf) << 8 | (spd->ibank & 3) << 5 |
+		(spd->buswidth & 3) << 12 | (spd->pagesize & 3);
+
+	if (spd->rank == 2)
+		spd_cb->emif_cfg.sdcfg |= 1 << 3;
+
+	spd_cb->emif_cfg.sdtim1 = ((spd->t_wr - 1) & 0x1f) << 25 |
+		((spd->t_ras - 1) & 0x7f) << 18 |
+		((spd->t_rc - 1) & 0xff) << 10 |
+		(spd->t_rrd2 & 0x3f) << 4  |
+		((spd->t_wtr - 1) & 0xf);
+
+	spd_cb->emif_cfg.sdtim2 = 0x07 << 10 | ((spd->t_rp - 1) & 0x1f) << 5 |
+		((spd->t_rcd - 1) & 0x1f);
+
+	spd_cb->emif_cfg.sdtim3 = ((spd->t_xp - 2) & 0xf) << 28 |
+		((spd->t_xs - 1) & 0x3ff) << 18 |
+		((spd->t_xsdll - 1) & 0x3ff) << 8 |
+		((spd->t_rtp - 1) & 0xf) << 4 | ((spd->t_cke) & 0xf);
+
+	spd_cb->emif_cfg.sdtim4 = (spd->t_csta & 0xf) << 28 |
+		((spd->t_ckesr - 1) & 0xf) << 24 |
+		((spd->t_zqcs - 1) & 0xff) << 16 |
+		((spd->t_rfc - 1) & 0x3ff) << 4 |
+		(spd->t_ras_max & 0xf);
+
+	spd_cb->emif_cfg.sdrfc = (spd->refresh_rate - 1) & 0xffff;
+
+	/* TODO zqcfg value fixed ,May be required correction for K2E evm. */
+	spd_cb->emif_cfg.zqcfg = (spd->rank == 2) ? 0xF0073200 : 0x70073200;
+}
+
+static int ddr3_read_spd(ddr3_spd_eeprom_t *spd_params)
+{
+	int ret;
+#if !CONFIG_IS_ENABLED(DM_I2C)
+	int old_bus;
+
+	i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
+
+	old_bus = i2c_get_bus_num();
+	i2c_set_bus_num(1);
+
+	ret = i2c_read(0x53, 0, 1, (unsigned char *)spd_params, 256);
+
+	i2c_set_bus_num(old_bus);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(1, 0x53, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_read(dev, 0, (unsigned char *)spd_params, 256);
+#endif
+	if (ret) {
+		printf("Cannot read DIMM params\n");
+		return 1;
+	}
+
+	if (ddr3_spd_check(spd_params))
+		return 1;
+
+	return 0;
+}
+
+int ddr3_get_size(void)
+{
+	ddr3_spd_eeprom_t spd_params;
+
+	if (ddr3_read_spd(&spd_params))
+		return 0;
+
+	return ddr3_get_size_in_mb(&spd_params) / 1024;
+}
+
+int ddr3_get_dimm_params_from_spd(struct ddr3_spd_cb *spd_cb)
+{
+	struct ddr3_sodimm spd;
+	ddr3_spd_eeprom_t spd_params;
+
+	memset(&spd, 0, sizeof(spd));
+
+	if (ddr3_read_spd(&spd_params))
+		return 1;
+
+	if (ddrtimingcalculation(&spd_params, &spd, spd_cb)) {
+		printf("Timing caclulation error\n");
+		return 1;
+	}
+
+	strncpy(spd_cb->dimm_name, (char *)spd_params.mpart, 18);
+	spd_cb->dimm_name[18] = '\0';
+
+	init_ddr3param(spd_cb, &spd);
+
+	dump_emif_config(&spd_cb->emif_cfg);
+	dump_phy_config(&spd_cb->phy_cfg);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2e.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2e.h
new file mode 100644
index 000000000..8e16167ad
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2e.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2E: Clock management APIs
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_K2E_H
+#define __ASM_ARCH_CLOCK_K2E_H
+
+#define PLLSET_CMD_LIST	"<pa|ddr3>"
+
+#define KS2_CLK1_6	sys_clk0_6_clk
+
+#define CORE_PLL_800	{CORE_PLL, 16, 1, 2}
+#define CORE_PLL_850	{CORE_PLL, 17, 1, 2}
+#define CORE_PLL_1000	{CORE_PLL, 20, 1, 2}
+#define CORE_PLL_1200	{CORE_PLL, 24, 1, 2}
+#define PASS_PLL_1000	{PASS_PLL, 20, 1, 2}
+#define CORE_PLL_1250	{CORE_PLL, 25, 1, 2}
+#define CORE_PLL_1350	{CORE_PLL, 27, 1, 2}
+#define CORE_PLL_1400	{CORE_PLL, 28, 1, 2}
+#define CORE_PLL_1500	{CORE_PLL, 30, 1, 2}
+#define DDR3_PLL_200	{DDR3_PLL, 4,  1, 2}
+#define DDR3_PLL_400	{DDR3_PLL, 16, 1, 4}
+#define DDR3_PLL_800	{DDR3_PLL, 16, 1, 2}
+#define DDR3_PLL_333	{DDR3_PLL, 20, 1, 6}
+
+/* k2e DEV supports 800, 850, 1000, 1250, 1350, 1400, 1500 MHz */
+#define DEV_SUPPORTED_SPEEDS	0xFFF
+#define ARM_SUPPORTED_SPEEDS	0
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2g.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2g.h
new file mode 100644
index 000000000..823aea8e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2g.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2G: Clock data
+ *
+ * (C) Copyright 2015
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_K2G_H
+#define __ASM_ARCH_CLOCK_K2G_H
+
+#define PLLSET_CMD_LIST		"<pa|arm|ddr3>"
+
+#define DEV_SUPPORTED_SPEEDS	0xff
+#define ARM_SUPPORTED_SPEEDS	0x3ff
+
+#define KS2_CLK1_6 sys_clk0_6_clk
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2hk.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2hk.h
new file mode 100644
index 000000000..46dda879f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2hk.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2HK: Clock management APIs
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_K2HK_H
+#define __ASM_ARCH_CLOCK_K2HK_H
+
+#define PLLSET_CMD_LIST		"<pa|arm|ddr3a|ddr3b>"
+
+#define KS2_CLK1_6 sys_clk0_6_clk
+
+#define CORE_PLL_799    {CORE_PLL,	13,	1,	2}
+#define CORE_PLL_983    {CORE_PLL,	16,	1,	2}
+#define CORE_PLL_999	{CORE_PLL,	122,	15,	1}
+#define CORE_PLL_1167   {CORE_PLL,	19,	1,	2}
+#define CORE_PLL_1228   {CORE_PLL,	20,	1,	2}
+#define CORE_PLL_1200	{CORE_PLL,	625,	32,	2}
+#define PASS_PLL_1228   {PASS_PLL,	20,	1,	2}
+#define PASS_PLL_983    {PASS_PLL,	16,	1,	2}
+#define PASS_PLL_1050   {PASS_PLL,	205,    12,	2}
+#define TETRIS_PLL_500  {TETRIS_PLL,	8,	1,	2}
+#define TETRIS_PLL_750  {TETRIS_PLL,	12,	1,	2}
+#define TETRIS_PLL_800	{TETRIS_PLL,	32,	5,	1}
+#define TETRIS_PLL_687  {TETRIS_PLL,	11,	1,	2}
+#define TETRIS_PLL_625  {TETRIS_PLL,	10,	1,	2}
+#define TETRIS_PLL_812  {TETRIS_PLL,	13,	1,	2}
+#define TETRIS_PLL_875  {TETRIS_PLL,	14,	1,	2}
+#define TETRIS_PLL_1000	{TETRIS_PLL,	40,	5,	1}
+#define TETRIS_PLL_1188 {TETRIS_PLL,	19,	2,	1}
+#define TETRIS_PLL_1200 {TETRIS_PLL,	48,	5,	1}
+#define TETRIS_PLL_1350	{TETRIS_PLL,	54,	5,	1}
+#define TETRIS_PLL_1375 {TETRIS_PLL,	22,	2,	1}
+#define TETRIS_PLL_1400 {TETRIS_PLL,	56,	5,	1}
+#define DDR3_PLL_200(x)	{DDR3##x##_PLL,	4,	1,	2}
+#define DDR3_PLL_400(x)	{DDR3##x##_PLL,	16,	1,	4}
+#define DDR3_PLL_800(x)	{DDR3##x##_PLL,	16,	1,	2}
+#define DDR3_PLL_333(x)	{DDR3##x##_PLL,	20,	1,	6}
+
+/* k2h DEV supports 800, 1000, 1200 MHz */
+#define DEV_SUPPORTED_SPEEDS	0x383
+/* k2h ARM supportd 800, 1000, 1200, 1350, 1400 MHz */
+#define ARM_SUPPORTED_SPEEDS	0x3EF
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2l.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2l.h
new file mode 100644
index 000000000..e89715c7e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock-k2l.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2L: Clock management APIs
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_K2L_H
+#define __ASM_ARCH_CLOCK_K2L_H
+
+#define PLLSET_CMD_LIST	"<pa|arm|ddr3>"
+
+#define KS2_CLK1_6	sys_clk0_6_clk
+
+#define CORE_PLL_799	{CORE_PLL, 13, 1, 2}
+#define CORE_PLL_983	{CORE_PLL, 16, 1, 2}
+#define CORE_PLL_1000	{CORE_PLL, 114, 7, 2}
+#define CORE_PLL_1167	{CORE_PLL, 19, 1, 2}
+#define CORE_PLL_1198	{CORE_PLL, 39, 2, 2}
+#define CORE_PLL_1228	{CORE_PLL, 20, 1, 2}
+#define PASS_PLL_1228	{PASS_PLL, 20, 1, 2}
+#define PASS_PLL_983	{PASS_PLL, 16, 1, 2}
+#define PASS_PLL_1050	{PASS_PLL, 205, 12, 2}
+#define TETRIS_PLL_491	{TETRIS_PLL, 8, 1, 2}
+#define TETRIS_PLL_737	{TETRIS_PLL, 12, 1, 2}
+#define TETRIS_PLL_799	{TETRIS_PLL, 13, 1, 2}
+#define TETRIS_PLL_983	{TETRIS_PLL, 16, 1, 2}
+#define TETRIS_PLL_1000	{TETRIS_PLL, 114, 7, 2}
+#define TETRIS_PLL_1167	{TETRIS_PLL, 19, 1, 2}
+#define TETRIS_PLL_1198	{TETRIS_PLL, 39, 2, 2}
+#define TETRIS_PLL_1228	{TETRIS_PLL, 20, 1, 2}
+#define TETRIS_PLL_1352	{TETRIS_PLL, 22, 1, 2}
+#define TETRIS_PLL_1401	{TETRIS_PLL, 114, 5, 2}
+#define DDR3_PLL_200	{DDR3_PLL, 4, 1, 2}
+#define DDR3_PLL_400	{DDR3_PLL, 16, 1, 4}
+#define DDR3_PLL_800	{DDR3_PLL, 16, 1, 2}
+#define DDR3_PLL_333	{DDR3_PLL, 20, 1, 6}
+
+/* k2l DEV supports 800, 1000, 1200 MHz */
+#define DEV_SUPPORTED_SPEEDS	0x383
+/* k2l ARM supportd 800, 1000, 1200, 1350, 1400 MHz */
+#define ARM_SUPPORTED_SPEEDS	0x3ef
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/clock.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock.h
new file mode 100644
index 000000000..7ce2469b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * keystone2: common clock header file
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SOC_K2HK
+#include <asm/arch/clock-k2hk.h>
+#endif
+
+#ifdef CONFIG_SOC_K2E
+#include <asm/arch/clock-k2e.h>
+#endif
+
+#ifdef CONFIG_SOC_K2L
+#include <asm/arch/clock-k2l.h>
+#endif
+
+#ifdef CONFIG_SOC_K2G
+#include <asm/arch/clock-k2g.h>
+#endif
+
+#define CORE_PLL MAIN_PLL
+#define DDR3_PLL DDR3A_PLL
+#define NSS_PLL PASS_PLL
+
+#define CLK_LIST(CLK)\
+	CLK(0, core_pll_clk)\
+	CLK(1, pass_pll_clk)\
+	CLK(2, tetris_pll_clk)\
+	CLK(3, ddr3a_pll_clk)\
+	CLK(4, ddr3b_pll_clk)\
+	CLK(5, sys_clk0_clk)\
+	CLK(6, sys_clk0_1_clk)\
+	CLK(7, sys_clk0_2_clk)\
+	CLK(8, sys_clk0_3_clk)\
+	CLK(9, sys_clk0_4_clk)\
+	CLK(10, sys_clk0_6_clk)\
+	CLK(11, sys_clk0_8_clk)\
+	CLK(12, sys_clk0_12_clk)\
+	CLK(13, sys_clk0_24_clk)\
+	CLK(14, sys_clk1_clk)\
+	CLK(15, sys_clk1_3_clk)\
+	CLK(16, sys_clk1_4_clk)\
+	CLK(17, sys_clk1_6_clk)\
+	CLK(18, sys_clk1_12_clk)\
+	CLK(19, sys_clk2_clk)\
+	CLK(20, sys_clk3_clk)\
+	CLK(21, uart_pll_clk)
+
+#include <asm/types.h>
+
+#define GENERATE_ENUM(NUM, ENUM) ENUM = NUM,
+#define GENERATE_INDX_STR(NUM, STRING) #NUM"\t- "#STRING"\n"
+#define CLOCK_INDEXES_LIST	CLK_LIST(GENERATE_INDX_STR)
+
+enum {
+	SPD200,
+	SPD400,
+	SPD600,
+	SPD800,
+	SPD850,
+	SPD900,
+	SPD1000,
+	SPD1200,
+	SPD1250,
+	SPD1350,
+	SPD1400,
+	SPD1500,
+	NUM_SPDS,
+};
+
+/* PLL identifiers */
+enum {
+	MAIN_PLL,
+	TETRIS_PLL,
+	PASS_PLL,
+	DDR3A_PLL,
+	DDR3B_PLL,
+	UART_PLL,
+	MAX_PLL_COUNT,
+};
+
+enum ext_clk_e {
+	sys_clk,
+	alt_core_clk,
+	pa_clk,
+	tetris_clk,
+	ddr3a_clk,
+	ddr3b_clk,
+	uart_clk,
+	ext_clk_count /* number of external clocks */
+};
+
+enum clk_e {
+	CLK_LIST(GENERATE_ENUM)
+};
+
+struct keystone_pll_regs {
+	u32 reg0;
+	u32 reg1;
+};
+
+/* PLL configuration data */
+struct pll_init_data {
+	int pll;
+	int pll_m;		/* PLL Multiplier */
+	int pll_d;		/* PLL divider */
+	int pll_od;		/* PLL output divider */
+};
+
+extern const struct keystone_pll_regs keystone_pll_regs[];
+extern s16 divn_val[];
+extern int speeds[];
+
+void init_plls(void);
+void init_pll(const struct pll_init_data *data);
+struct pll_init_data *get_pll_init_data(int pll);
+unsigned long ks_clk_get_rate(unsigned int clk);
+int get_max_dev_speed(int *spds);
+int get_max_arm_speed(int *spds);
+void pll_pa_clk_sel(void);
+unsigned int get_external_clk(u32 clk);
+
+#endif
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/clock_defs.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock_defs.h
new file mode 100644
index 000000000..336b103dc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/clock_defs.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * keystone2: common pll clock definitions
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef _CLOCK_DEFS_H_
+#define _CLOCK_DEFS_H_
+
+#include <asm/arch/hardware.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/* PLL Control Registers */
+struct pllctl_regs {
+	u32	ctl;		/* 00 */
+	u32	ocsel;		/* 04 */
+	u32	secctl;		/* 08 */
+	u32	resv0;
+	u32	mult;		/* 10 */
+	u32	prediv;		/* 14 */
+	u32	div1;		/* 18 */
+	u32	div2;		/* 1c */
+	u32	div3;		/* 20 */
+	u32	oscdiv1;	/* 24 */
+	u32	resv1;		/* 28 */
+	u32	bpdiv;		/* 2c */
+	u32	wakeup;		/* 30 */
+	u32	resv2;
+	u32	cmd;		/* 38 */
+	u32	stat;		/* 3c */
+	u32	alnctl;		/* 40 */
+	u32	dchange;	/* 44 */
+	u32	cken;		/* 48 */
+	u32	ckstat;		/* 4c */
+	u32	systat;		/* 50 */
+	u32	ckctl;		/* 54 */
+	u32	resv3[2];
+	u32	div4;		/* 60 */
+	u32	div5;		/* 64 */
+	u32	div6;		/* 68 */
+	u32	div7;		/* 6c */
+	u32	div8;		/* 70 */
+	u32	div9;		/* 74 */
+	u32	div10;		/* 78 */
+	u32	div11;		/* 7c */
+	u32	div12;		/* 80 */
+};
+
+static struct pllctl_regs *pllctl_regs[] = {
+	(struct pllctl_regs *)(KS2_CLOCK_BASE + 0x100)
+};
+
+#define pllctl_reg(pll, reg)            (&(pllctl_regs[pll]->reg))
+#define pllctl_reg_read(pll, reg)       __raw_readl(pllctl_reg(pll, reg))
+#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg))
+
+#define pllctl_reg_rmw(pll, reg, mask, val) \
+	pllctl_reg_write(pll, reg, \
+		(pllctl_reg_read(pll, reg) & ~(mask)) | val)
+
+#define pllctl_reg_setbits(pll, reg, mask) \
+	pllctl_reg_rmw(pll, reg, 0, mask)
+
+#define pllctl_reg_clrbits(pll, reg, mask) \
+	pllctl_reg_rmw(pll, reg, mask, 0)
+
+#define pll0div_read(N) ((pllctl_reg_read(CORE_PLL, div##N) & 0xff) + 1)
+
+/* PLLCTL Bits */
+#define PLLCTL_PLLENSRC_SHIF	5
+#define PLLCTL_PLLENSRC_MASK	BIT(5)
+#define PLLCTL_PLLRST_SHIFT	3
+#define PLLCTL_PLLRST_MASK	BIT(3)
+#define PLLCTL_PLLPWRDN_SHIFT	1
+#define PLLCTL_PLLPWRDN_MASK	BIT(1)
+#define PLLCTL_PLLEN_SHIFT	0
+#define PLLCTL_PLLEN_MASK	BIT(0)
+
+/* SECCTL Bits */
+#define SECCTL_BYPASS_SHIFT	23
+#define SECCTL_BYPASS_MASK	BIT(23)
+#define SECCTL_OP_DIV_SHIFT	19
+#define SECCTL_OP_DIV_MASK	(0xf << 19)
+
+/* PLLM Bits */
+#define PLLM_MULT_LO_SHIFT	0
+#define PLLM_MULT_LO_MASK	0x3f
+#define PLLM_MULT_LO_BITS	6
+
+/* PLLDIVn Bits */
+#define PLLDIV_ENABLE_SHIFT	15
+#define PLLDIV_ENABLE_MASK	BIT(15)
+#define PLLDIV_RATIO_SHIFT	0x0
+#define PLLDIV_RATIO_MASK	0xff
+#define PLLDIV_MAX		16
+
+/* PLLCMD Bits */
+#define PLLCMD_GOSET_SHIFT	0
+#define PLLCMD_GOSET_MASK	BIT(0)
+
+/* PLLSTAT Bits */
+#define PLLSTAT_GOSTAT_SHIFT	0
+#define PLLSTAT_GOSTAT_MASK	BIT(0)
+
+/* Device Config PLLCTL0 */
+#define CFG_PLLCTL0_BWADJ_SHIFT		24
+#define CFG_PLLCTL0_BWADJ_MASK		(0xff << 24)
+#define CFG_PLLCTL0_BWADJ_BITS		8
+#define CFG_PLLCTL0_BYPASS_SHIFT	23
+#define CFG_PLLCTL0_BYPASS_MASK		BIT(23)
+#define CFG_PLLCTL0_CLKOD_SHIFT		19
+#define CFG_PLLCTL0_CLKOD_MASK		(0xf << 19)
+#define CFG_PLLCTL0_PLLM_HI_SHIFT	12
+#define CFG_PLLCTL0_PLLM_HI_MASK	(0x7f << 12)
+#define CFG_PLLCTL0_PLLM_SHIFT		6
+#define CFG_PLLCTL0_PLLM_MASK		(0x1fff << 6)
+#define CFG_PLLCTL0_PLLD_SHIFT		0
+#define CFG_PLLCTL0_PLLD_MASK		0x3f
+
+/* Device Config PLLCTL1 */
+#define CFG_PLLCTL1_RST_SHIFT	14
+#define CFG_PLLCTL1_RST_MASK	BIT(14)
+#define CFG_PLLCTL1_PAPLL_SHIFT	13
+#define CFG_PLLCTL1_PAPLL_MASK	BIT(13)
+#define CFG_PLLCTL1_ENSAT_SHIFT	6
+#define CFG_PLLCTL1_ENSAT_MASK	BIT(6)
+#define CFG_PLLCTL1_BWADJ_SHIFT	0
+#define CFG_PLLCTL1_BWADJ_MASK	0xf
+
+#define MISC_CTL1_ARM_PLL_EN	BIT(13)
+
+#endif  /* _CLOCK_DEFS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/ddr3.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/ddr3.h
new file mode 100644
index 000000000..cb28068db
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/ddr3.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * DDR3
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef _DDR3_H_
+#define _DDR3_H_
+
+#include <asm/arch/hardware.h>
+
+struct ddr3_phy_config {
+	unsigned int pllcr;
+	unsigned int pgcr1_mask;
+	unsigned int pgcr1_val;
+	unsigned int ptr0;
+	unsigned int ptr1;
+	unsigned int ptr2;
+	unsigned int ptr3;
+	unsigned int ptr4;
+	unsigned int dcr_mask;
+	unsigned int dcr_val;
+	unsigned int dtpr0;
+	unsigned int dtpr1;
+	unsigned int dtpr2;
+	unsigned int mr0;
+	unsigned int mr1;
+	unsigned int mr2;
+	unsigned int dtcr;
+	unsigned int pgcr2;
+	unsigned int zq0cr1;
+	unsigned int zq1cr1;
+	unsigned int zq2cr1;
+	unsigned int pir_v1;
+	unsigned int datx8_2_mask;
+	unsigned int datx8_2_val;
+	unsigned int datx8_3_mask;
+	unsigned int datx8_3_val;
+	unsigned int datx8_4_mask;
+	unsigned int datx8_4_val;
+	unsigned int datx8_5_mask;
+	unsigned int datx8_5_val;
+	unsigned int datx8_6_mask;
+	unsigned int datx8_6_val;
+	unsigned int datx8_7_mask;
+	unsigned int datx8_7_val;
+	unsigned int datx8_8_mask;
+	unsigned int datx8_8_val;
+	unsigned int pir_v2;
+};
+
+struct ddr3_emif_config {
+	unsigned int sdcfg;
+	unsigned int sdtim1;
+	unsigned int sdtim2;
+	unsigned int sdtim3;
+	unsigned int sdtim4;
+	unsigned int zqcfg;
+	unsigned int sdrfc;
+};
+
+struct ddr3_spd_cb {
+	char   dimm_name[32];
+	struct ddr3_phy_config phy_cfg;
+	struct ddr3_emif_config emif_cfg;
+	unsigned int ddrspdclock;
+	int    ddr_size_gbyte;
+};
+
+u32 ddr3_init(void);
+void ddr3_reset_ddrphy(void);
+void ddr3_init_ecc(u32 base, u32 ddr3_size);
+void ddr3_disable_ecc(u32 base);
+void ddr3_check_ecc_int(u32 base);
+int ddr3_ecc_support_rmw(u32 base);
+void ddr3_err_reset_workaround(void);
+void ddr3_enable_ecc(u32 base, int test);
+void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg);
+void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg);
+int ddr3_get_size(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2e.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2e.h
new file mode 100644
index 000000000..a30c86057
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2e.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2E: SoC definitions
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_K2E_H
+#define __ASM_ARCH_HARDWARE_K2E_H
+
+/* PA SS Registers */
+#define KS2_PASS_BASE			0x24000000
+
+/* Power and Sleep Controller (PSC) Domains */
+#define KS2_LPSC_MOD_RST		0
+#define KS2_LPSC_USB_1			1
+#define KS2_LPSC_USB			2
+#define KS2_LPSC_EMIF25_SPI		3
+#define KS2_LPSC_TSIP			4
+#define KS2_LPSC_DEBUGSS_TRC		5
+#define KS2_LPSC_TETB_TRC		6
+#define KS2_LPSC_PKTPROC		7
+#define KS2_LPSC_PA			KS2_LPSC_PKTPROC
+#define KS2_LPSC_SGMII			8
+#define KS2_LPSC_CPGMAC			KS2_LPSC_SGMII
+#define KS2_LPSC_CRYPTO			9
+#define KS2_LPSC_PCIE			10
+#define KS2_LPSC_VUSR0			12
+#define KS2_LPSC_CHIP_SRSS		13
+#define KS2_LPSC_MSMC			14
+#define KS2_LPSC_EMIF4F_DDR3		23
+#define KS2_LPSC_PCIE_1			27
+#define KS2_LPSC_XGE			50
+
+/* Chip Interrupt Controller */
+#define KS2_CIC2_DDR3_ECC_IRQ_NUM	-1	/* not defined in K2E */
+#define KS2_CIC2_DDR3_ECC_CHAN_NUM	-1	/* not defined in K2E */
+
+/* SGMII SerDes */
+#define KS2_SGMII_SERDES2_BASE		0x02324000
+#define KS2_LANES_PER_SGMII_SERDES	4
+
+/* Number of DSP cores */
+#define KS2_NUM_DSPS			1
+
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_CTRL_BASE	0x24186000
+#define KS2_NETCP_PDMA_TX_BASE		0x24187000
+#define KS2_NETCP_PDMA_TX_CH_NUM	21
+#define KS2_NETCP_PDMA_RX_BASE		0x24188000
+#define KS2_NETCP_PDMA_RX_CH_NUM	91
+#define KS2_NETCP_PDMA_SCHED_BASE	0x24186100
+#define KS2_NETCP_PDMA_RX_FLOW_BASE	0x24189000
+#define KS2_NETCP_PDMA_RX_FLOW_NUM	96
+#define KS2_NETCP_PDMA_TX_SND_QUEUE	896
+
+/* NETCP */
+#define KS2_NETCP_BASE			0x24000000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2g.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2g.h
new file mode 100644
index 000000000..971c081bb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2g.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2G: SoC definitions
+ *
+ * (C) Copyright 2015
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_K2G_H
+#define __ASM_ARCH_HARDWARE_K2G_H
+
+#define KS2_NUM_DSPS			1
+
+/* Power and Sleep Controller (PSC) Domains */
+#define KS2_LPSC_ALWAYSON		0
+#define KS2_LPSC_PMMC			1
+#define KS2_LPSC_DEBUG			2
+#define KS2_LPSC_NSS			3
+#define KS2_LPSC_SA			4
+#define KS2_LPSC_TERANET		5
+#define KS2_LPSC_SYS_COMP		6
+#define KS2_LPSC_QSPI			7
+#define KS2_LPSC_MMC			8
+#define KS2_LPSC_GPMC			9
+#define KS2_LPSC_MLB			11
+#define KS2_LPSC_EHRPWM			12
+#define KS2_LPSC_EQEP			13
+#define KS2_LPSC_ECAP			14
+#define KS2_LPSC_MCASP			15
+#define KS2_LPSC_SR			16
+#define KS2_LPSC_MSMC			17
+#ifdef KS2_LPSC_GEM_0
+#undef KS2_LPSC_GEM_0
+#endif
+#define KS2_LPSC_GEM_0			18
+#define KS2_LPSC_ARM			19
+#define KS2_LPSC_ASRC			20
+#define KS2_LPSC_ICSS			21
+#define KS2_LPSC_DSS			23
+#define KS2_LPSC_PCIE			24
+#define KS2_LPSC_USB_0			25
+#define KS2_LPSC_USB			KS2_LPSC_USB_0
+#define KS2_LPSC_USB_1			26
+#define KS2_LPSC_DDR3			27
+#define KS2_LPSC_SPARE0_LPSC0		28
+#define KS2_LPSC_SPARE0_LPSC1		29
+#define KS2_LPSC_SPARE1_LPSC0		30
+#define KS2_LPSC_SPARE1_LPSC1		31
+
+#define KS2_LPSC_CPGMAC			KS2_LPSC_NSS
+#define KS2_LPSC_CRYPTO			KS2_LPSC_SA
+
+/* SGMII SerDes */
+#define KS2_LANES_PER_SGMII_SERDES	4
+
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_CTRL_BASE	0x04010000
+#define KS2_NETCP_PDMA_TX_BASE		0x04011000
+#define KS2_NETCP_PDMA_TX_CH_NUM	21
+#define KS2_NETCP_PDMA_RX_BASE		0x04012000
+#define KS2_NETCP_PDMA_RX_CH_NUM	32
+#define KS2_NETCP_PDMA_SCHED_BASE	0x04010100
+#define KS2_NETCP_PDMA_RX_FLOW_BASE	0x04013000
+#define KS2_NETCP_PDMA_RX_FLOW_NUM	32
+#define KS2_NETCP_PDMA_TX_SND_QUEUE	5
+
+/* NETCP */
+#define KS2_NETCP_BASE			0x04000000
+
+#define K2G_GPIO0_BASE			0X02603000
+#define K2G_GPIO1_BASE			0X0260a000
+#define K2G_GPIO0_BANK0_BASE		K2G_GPIO0_BASE + 0x10
+#define K2G_GPIO1_BANK2_BASE		K2G_GPIO1_BASE + 0x38
+#define K2G_GPIO_DIR_OFFSET		0x0
+#define K2G_GPIO_OUTDATA_OFFSET		0x4
+#define K2G_GPIO_SETDATA_OFFSET		0x8
+#define K2G_GPIO_CLRDATA_OFFSET		0xC
+
+/* BOOTCFG RESETMUX8 */
+#define KS2_RSTMUX8			(KS2_DEVICE_STATE_CTRL_BASE + 0x328)
+
+/* RESETMUX register definitions */
+#define RSTMUX_LOCK8_SHIFT		0x0
+#define RSTMUX_LOCK8_MASK		(0x1 << 0)
+#define RSTMUX_OMODE8_SHIFT		0x1
+#define RSTMUX_OMODE8_MASK		(0x7 << 1)
+#define RSTMUX_OMODE8_DEV_RESET		0x2
+#define RSTMUX_OMODE8_INT		0x3
+#define RSTMUX_OMODE8_INT_AND_DEV_RESET	0x4
+
+/* DEVSTAT register definition */
+#define KS2_DEVSTAT_REFCLK_SHIFT	 7
+#define KS2_DEVSTAT_REFCLK_MASK		(0x7 << 7)
+
+/* GPMC */
+#define KS2_GPMC_BASE			0x21818000
+
+/* SYSCLK indexes */
+#define SYSCLK_19MHz	0
+#define SYSCLK_24MHz	1
+#define SYSCLK_25MHz	2
+#define SYSCLK_26MHz	3
+#define MAX_SYSCLK	4
+
+#ifndef __ASSEMBLY__
+static inline u8 get_sysclk_index(void)
+{
+	u32 dev_stat = __raw_readl(KS2_DEVSTAT);
+	return (dev_stat & KS2_DEVSTAT_REFCLK_MASK) >> KS2_DEVSTAT_REFCLK_SHIFT;
+}
+#endif
+#endif /* __ASM_ARCH_HARDWARE_K2G_H */
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2hk.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2hk.h
new file mode 100644
index 000000000..3d078be99
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2hk.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2HK: SoC definitions
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_K2HK_H
+#define __ASM_ARCH_HARDWARE_K2HK_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define KS2_ARM_PLL_EN			BIT(13)
+
+/* PA SS Registers */
+#define KS2_PASS_BASE			0x02000000
+
+/* Power and Sleep Controller (PSC) Domains */
+#define KS2_LPSC_MOD			0
+#define KS2_LPSC_DUMMY1			1
+#define KS2_LPSC_USB			2
+#define KS2_LPSC_EMIF25_SPI		3
+#define KS2_LPSC_TSIP			4
+#define KS2_LPSC_DEBUGSS_TRC		5
+#define KS2_LPSC_TETB_TRC		6
+#define KS2_LPSC_PKTPROC		7
+#define KS2_LPSC_PA			KS2_LPSC_PKTPROC
+#define KS2_LPSC_SGMII			8
+#define KS2_LPSC_CPGMAC			KS2_LPSC_SGMII
+#define KS2_LPSC_CRYPTO			9
+#define KS2_LPSC_PCIE			10
+#define KS2_LPSC_SRIO			11
+#define KS2_LPSC_VUSR0			12
+#define KS2_LPSC_CHIP_SRSS		13
+#define KS2_LPSC_MSMC			14
+#define KS2_LPSC_GEM_1			16
+#define KS2_LPSC_GEM_2			17
+#define KS2_LPSC_GEM_3			18
+#define KS2_LPSC_GEM_4			19
+#define KS2_LPSC_GEM_5			20
+#define KS2_LPSC_GEM_6			21
+#define KS2_LPSC_GEM_7			22
+#define KS2_LPSC_EMIF4F_DDR3A		23
+#define KS2_LPSC_EMIF4F_DDR3B		24
+#define KS2_LPSC_TAC			25
+#define KS2_LPSC_RAC			26
+#define KS2_LPSC_RAC_1			27
+#define KS2_LPSC_FFTC_A			28
+#define KS2_LPSC_FFTC_B			29
+#define KS2_LPSC_FFTC_C			30
+#define KS2_LPSC_FFTC_D			31
+#define KS2_LPSC_FFTC_E			32
+#define KS2_LPSC_FFTC_F			33
+#define KS2_LPSC_AI2			34
+#define KS2_LPSC_TCP3D_0		35
+#define KS2_LPSC_TCP3D_1		36
+#define KS2_LPSC_TCP3D_2		37
+#define KS2_LPSC_TCP3D_3		38
+#define KS2_LPSC_VCP2X4_A		39
+#define KS2_LPSC_CP2X4_B		40
+#define KS2_LPSC_VCP2X4_C		41
+#define KS2_LPSC_VCP2X4_D		42
+#define KS2_LPSC_VCP2X4_E		43
+#define KS2_LPSC_VCP2X4_F		44
+#define KS2_LPSC_VCP2X4_G		45
+#define KS2_LPSC_VCP2X4_H		46
+#define KS2_LPSC_BCP			47
+#define KS2_LPSC_DXB			48
+#define KS2_LPSC_VUSR1			49
+#define KS2_LPSC_XGE			50
+#define KS2_LPSC_ARM_SREFLEX		51
+
+/* DDR3B definitions */
+#define KS2_DDR3B_EMIF_CTRL_BASE	0x21020000
+#define KS2_DDR3B_EMIF_DATA_BASE	0x60000000
+#define KS2_DDR3B_DDRPHYC		0x02328000
+
+#define KS2_CIC2_DDR3_ECC_IRQ_NUM	0x0D3 /* DDR3 ECC system irq number */
+#define KS2_CIC2_DDR3_ECC_CHAN_NUM	0x01D /* DDR3 ECC int mapped to CIC2
+						 channel 29 */
+
+/* SGMII SerDes */
+#define KS2_LANES_PER_SGMII_SERDES	4
+
+/* Number of DSP cores */
+#define KS2_NUM_DSPS			8
+
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_CTRL_BASE	0x02004000
+#define KS2_NETCP_PDMA_TX_BASE		0x02004400
+#define KS2_NETCP_PDMA_TX_CH_NUM	9
+#define KS2_NETCP_PDMA_RX_BASE		0x02004800
+#define KS2_NETCP_PDMA_RX_CH_NUM	26
+#define KS2_NETCP_PDMA_SCHED_BASE	0x02004c00
+#define KS2_NETCP_PDMA_RX_FLOW_BASE	0x02005000
+#define KS2_NETCP_PDMA_RX_FLOW_NUM	32
+#define KS2_NETCP_PDMA_TX_SND_QUEUE	648
+
+/* NETCP */
+#define KS2_NETCP_BASE			0x02000000
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2l.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2l.h
new file mode 100644
index 000000000..0e710a379
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware-k2l.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2L: SoC definitions
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_K2L_H
+#define __ASM_ARCH_HARDWARE_K2L_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define KS2_ARM_PLL_EN			BIT(13)
+
+/* PA SS Registers */
+#define KS2_PASS_BASE			0x26000000
+
+/* Power and Sleep Controller (PSC) Domains */
+#define KS2_LPSC_MOD			0
+#define KS2_LPSC_DFE_IQN_SYS		1
+#define KS2_LPSC_USB			2
+#define KS2_LPSC_EMIF25_SPI		3
+#define KS2_LPSC_TSIP                   4
+#define KS2_LPSC_DEBUGSS_TRC		5
+#define KS2_LPSC_TETB_TRC		6
+#define KS2_LPSC_PKTPROC		7
+#define KS2_LPSC_PA			KS2_LPSC_PKTPROC
+#define KS2_LPSC_SGMII			8
+#define KS2_LPSC_CPGMAC			KS2_LPSC_SGMII
+#define KS2_LPSC_CRYPTO			9
+#define KS2_LPSC_PCIE0			10
+#define KS2_LPSC_PCIE1			11
+#define KS2_LPSC_JESD_MISC		12
+#define KS2_LPSC_CHIP_SRSS		13
+#define KS2_LPSC_MSMC			14
+#define KS2_LPSC_GEM_1			16
+#define KS2_LPSC_GEM_2			17
+#define KS2_LPSC_GEM_3			18
+#define KS2_LPSC_EMIF4F_DDR3		23
+#define KS2_LPSC_TAC			25
+#define KS2_LPSC_RAC			26
+#define KS2_LPSC_DDUC4X_CFR2X_BB	27
+#define KS2_LPSC_FFTC_A			28
+#define KS2_LPSC_OSR			34
+#define KS2_LPSC_TCP3D_0		35
+#define KS2_LPSC_TCP3D_1		37
+#define KS2_LPSC_VCP2X4_A		39
+#define KS2_LPSC_VCP2X4_B		40
+#define KS2_LPSC_VCP2X4_C		41
+#define KS2_LPSC_VCP2X4_D		42
+#define KS2_LPSC_BCP			47
+#define KS2_LPSC_DPD4X			48
+#define KS2_LPSC_FFTC_B			49
+#define KS2_LPSC_IQN_AIL		50
+
+/* Chip Interrupt Controller */
+#define KS2_CIC2_DDR3_ECC_IRQ_NUM	0x0D3
+#define KS2_CIC2_DDR3_ECC_CHAN_NUM	0x01D
+
+/* OSR */
+#define KS2_OSR_DATA_BASE		0x70000000	/* OSR data base */
+#define KS2_OSR_CFG_BASE		0x02348c00	/* OSR config base */
+#define KS2_OSR_ECC_VEC			0x08		/* ECC Vector reg */
+#define KS2_OSR_ECC_CTRL		0x14		/* ECC control reg */
+
+/* OSR ECC Vector register */
+#define KS2_OSR_ECC_VEC_TRIG_RD		BIT(15)		/* trigger a read op */
+#define KS2_OSR_ECC_VEC_RD_DONE		BIT(24)		/* read complete */
+
+#define KS2_OSR_ECC_VEC_RAM_ID_SH	0		/* RAM ID shift */
+#define KS2_OSR_ECC_VEC_RD_ADDR_SH	16		/* read address shift */
+
+/* OSR ECC control register */
+#define KS2_OSR_ECC_CTRL_EN		BIT(0)		/* ECC enable bit */
+#define KS2_OSR_ECC_CTRL_CHK		BIT(1)		/* ECC check bit */
+#define KS2_OSR_ECC_CTRL_RMW		BIT(2)		/* ECC check bit */
+
+/* Number of OSR RAM banks */
+#define KS2_OSR_NUM_RAM_BANKS		4
+
+/* OSR memory size */
+#define KS2_OSR_SIZE			0x100000
+
+/* SGMII SerDes */
+#define KS2_SGMII_SERDES2_BASE		0x02320000
+#define KS2_LANES_PER_SGMII_SERDES	2
+
+/* Number of DSP cores */
+#define KS2_NUM_DSPS			4
+
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_CTRL_BASE	0x26186000
+#define KS2_NETCP_PDMA_TX_BASE		0x26187000
+#define KS2_NETCP_PDMA_TX_CH_NUM	21
+#define KS2_NETCP_PDMA_RX_BASE		0x26188000
+#define KS2_NETCP_PDMA_RX_CH_NUM	91
+#define KS2_NETCP_PDMA_SCHED_BASE	0x26186100
+#define KS2_NETCP_PDMA_RX_FLOW_BASE	0x26189000
+#define KS2_NETCP_PDMA_RX_FLOW_NUM	96
+#define KS2_NETCP_PDMA_TX_SND_QUEUE	896
+
+/* NETCP */
+#define KS2_NETCP_BASE			0x26000000
+
+#ifndef __ASSEMBLY__
+static inline int ddr3_get_size(void)
+{
+	return 2;
+}
+#endif
+
+#endif /* __ASM_ARCH_HARDWARE_K2L_H */
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware.h
new file mode 100644
index 000000000..0c5dc6a73
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/hardware.h
@@ -0,0 +1,398 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Keystone2: Common SoC definitions, structures etc.
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <config.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+
+#include <linux/sizes.h>
+#include <asm/io.h>
+
+#define	REG(addr)        (*(volatile unsigned int *)(addr))
+#define REG_P(addr)      ((volatile unsigned int *)(addr))
+
+typedef volatile unsigned int   dv_reg;
+typedef volatile unsigned int   *dv_reg_p;
+
+#endif
+
+#define KS2_DDRPHY_PIR_OFFSET           0x04
+#define KS2_DDRPHY_PGCR0_OFFSET         0x08
+#define KS2_DDRPHY_PGCR1_OFFSET         0x0C
+#define KS2_DDRPHY_PGSR0_OFFSET         0x10
+#define KS2_DDRPHY_PGSR1_OFFSET         0x14
+#define KS2_DDRPHY_PLLCR_OFFSET         0x18
+#define KS2_DDRPHY_PTR0_OFFSET          0x1C
+#define KS2_DDRPHY_PTR1_OFFSET          0x20
+#define KS2_DDRPHY_PTR2_OFFSET          0x24
+#define KS2_DDRPHY_PTR3_OFFSET          0x28
+#define KS2_DDRPHY_PTR4_OFFSET          0x2C
+#define KS2_DDRPHY_DCR_OFFSET           0x44
+
+#define KS2_DDRPHY_DTPR0_OFFSET         0x48
+#define KS2_DDRPHY_DTPR1_OFFSET         0x4C
+#define KS2_DDRPHY_DTPR2_OFFSET         0x50
+
+#define KS2_DDRPHY_MR0_OFFSET           0x54
+#define KS2_DDRPHY_MR1_OFFSET           0x58
+#define KS2_DDRPHY_MR2_OFFSET           0x5C
+#define KS2_DDRPHY_DTCR_OFFSET          0x68
+#define KS2_DDRPHY_PGCR2_OFFSET         0x8C
+
+#define KS2_DDRPHY_ZQ0CR1_OFFSET        0x184
+#define KS2_DDRPHY_ZQ1CR1_OFFSET        0x194
+#define KS2_DDRPHY_ZQ2CR1_OFFSET        0x1A4
+#define KS2_DDRPHY_ZQ3CR1_OFFSET        0x1B4
+
+#define KS2_DDRPHY_DATX8_2_OFFSET       0x240
+#define KS2_DDRPHY_DATX8_3_OFFSET       0x280
+#define KS2_DDRPHY_DATX8_4_OFFSET       0x2C0
+#define KS2_DDRPHY_DATX8_5_OFFSET       0x300
+#define KS2_DDRPHY_DATX8_6_OFFSET       0x340
+#define KS2_DDRPHY_DATX8_7_OFFSET       0x380
+#define KS2_DDRPHY_DATX8_8_OFFSET       0x3C0
+
+#define IODDRM_MASK                     0x00000180
+#define ZCKSEL_MASK                     0x01800000
+#define CL_MASK                         0x00000072
+#define WR_MASK                         0x00000E00
+#define BL_MASK                         0x00000003
+#define RRMODE_MASK                     0x00040000
+#define UDIMM_MASK                      0x20000000
+#define BYTEMASK_MASK                   0x0003FC00
+#define MPRDQ_MASK                      0x00000080
+#define PDQ_MASK                        0x00000070
+#define NOSRA_MASK                      0x08000000
+#define ECC_MASK                        0x00000001
+#define DXEN_MASK                       0x00000001
+
+/* DDR3 definitions */
+#define KS2_DDR3A_EMIF_CTRL_BASE	0x21010000
+#define KS2_DDR3A_EMIF_DATA_BASE	0x80000000
+#define KS2_DDR3A_DDRPHYC		0x02329000
+#define EMIF1_BASE			KS2_DDR3A_EMIF_CTRL_BASE
+
+#define KS2_DDR3_MIDR_OFFSET            0x00
+#define KS2_DDR3_STATUS_OFFSET          0x04
+#define KS2_DDR3_SDCFG_OFFSET           0x08
+#define KS2_DDR3_SDRFC_OFFSET           0x10
+#define KS2_DDR3_SDTIM1_OFFSET          0x18
+#define KS2_DDR3_SDTIM2_OFFSET          0x1C
+#define KS2_DDR3_SDTIM3_OFFSET          0x20
+#define KS2_DDR3_SDTIM4_OFFSET          0x28
+#define KS2_DDR3_PMCTL_OFFSET           0x38
+#define KS2_DDR3_ZQCFG_OFFSET           0xC8
+
+#define KS2_DDR3_PLLCTRL_PHY_RESET	0x80000000
+
+/* DDR3 ECC */
+#define KS2_DDR3_ECC_INT_STATUS_OFFSET			0x0AC
+#define KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET		0x0B4
+#define KS2_DDR3_ECC_CTRL_OFFSET			0x110
+#define KS2_DDR3_ECC_ADDR_RANGE1_OFFSET			0x114
+#define KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET		0x130
+#define KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET	0x13C
+
+/* DDR3 ECC Interrupt Status register */
+#define KS2_DDR3_1B_ECC_ERR_SYS		BIT(5)
+#define KS2_DDR3_2B_ECC_ERR_SYS		BIT(4)
+#define KS2_DDR3_WR_ECC_ERR_SYS		BIT(3)
+
+/* DDR3 ECC Control register */
+#define KS2_DDR3_ECC_EN			BIT(31)
+#define KS2_DDR3_ECC_ADDR_RNG_PROT	BIT(30)
+#define KS2_DDR3_ECC_VERIFY_EN		BIT(29)
+#define KS2_DDR3_ECC_RMW_EN		BIT(28)
+#define KS2_DDR3_ECC_ADDR_RNG_1_EN	BIT(0)
+
+#define KS2_DDR3_ECC_ENABLE		(KS2_DDR3_ECC_EN | \
+					KS2_DDR3_ECC_ADDR_RNG_PROT | \
+					KS2_DDR3_ECC_VERIFY_EN)
+
+/* EDMA */
+#define KS2_EDMA0_BASE			0x02700000
+
+/* EDMA3 register offsets */
+#define KS2_EDMA_QCHMAP0		0x0200
+#define KS2_EDMA_IPR			0x1068
+#define KS2_EDMA_ICR			0x1070
+#define KS2_EDMA_QEECR			0x1088
+#define KS2_EDMA_QEESR			0x108c
+#define KS2_EDMA_PARAM_1(x)		(0x4020 + (4 * x))
+
+/* NETCP pktdma */
+#ifdef CONFIG_SOC_K2G
+#define KS2_NETCP_PDMA_RX_FREE_QUEUE	113
+#define KS2_NETCP_PDMA_RX_RCV_QUEUE	114
+#else
+#define KS2_NETCP_PDMA_RX_FREE_QUEUE	4001
+#define KS2_NETCP_PDMA_RX_RCV_QUEUE	4002
+#endif
+
+/* Chip Interrupt Controller */
+#define KS2_CIC2_BASE			0x02608000
+
+/* Chip Interrupt Controller register offsets */
+#define KS2_CIC_CTRL			0x04
+#define KS2_CIC_HOST_CTRL		0x0C
+#define KS2_CIC_GLOBAL_ENABLE		0x10
+#define KS2_CIC_SYS_ENABLE_IDX_SET	0x28
+#define KS2_CIC_HOST_ENABLE_IDX_SET	0x34
+#define KS2_CIC_CHAN_MAP(n)		(0x0400 + (n << 2))
+
+#define KS2_UART0_BASE                	0x02530c00
+#define KS2_UART1_BASE                	0x02531000
+
+/* Boot Config */
+#define KS2_DEVICE_STATE_CTRL_BASE	0x02620000
+#define KS2_JTAG_ID_REG			(KS2_DEVICE_STATE_CTRL_BASE + 0x18)
+#define KS2_DEVSTAT			(KS2_DEVICE_STATE_CTRL_BASE + 0x20)
+#define KS2_DEVCFG			(KS2_DEVICE_STATE_CTRL_BASE + 0x14c)
+#define KS2_ETHERNET_CFG		(KS2_DEVICE_STATE_CTRL_BASE + 0xe20)
+#define KS2_ETHERNET_RGMII		2
+
+/* PSC */
+#define KS2_PSC_BASE			0x02350000
+#define KS2_LPSC_GEM_0			15
+#define KS2_LPSC_TETRIS			52
+#define KS2_TETRIS_PWR_DOMAIN		31
+#define KS2_GEM_0_PWR_DOMAIN		8
+
+/* Chip configuration unlock codes and registers */
+#define KS2_KICK0			(KS2_DEVICE_STATE_CTRL_BASE + 0x38)
+#define KS2_KICK1			(KS2_DEVICE_STATE_CTRL_BASE + 0x3c)
+#define KS2_KICK0_MAGIC			0x83e70b13
+#define KS2_KICK1_MAGIC			0x95a4f1e0
+
+/* PLL control registers */
+#define KS2_MAINPLLCTL0			(KS2_DEVICE_STATE_CTRL_BASE + 0x350)
+#define KS2_MAINPLLCTL1			(KS2_DEVICE_STATE_CTRL_BASE + 0x354)
+#define KS2_PASSPLLCTL0			(KS2_DEVICE_STATE_CTRL_BASE + 0x358)
+#define KS2_PASSPLLCTL1			(KS2_DEVICE_STATE_CTRL_BASE + 0x35C)
+#define KS2_DDR3APLLCTL0		(KS2_DEVICE_STATE_CTRL_BASE + 0x360)
+#define KS2_DDR3APLLCTL1		(KS2_DEVICE_STATE_CTRL_BASE + 0x364)
+#define KS2_DDR3BPLLCTL0		(KS2_DEVICE_STATE_CTRL_BASE + 0x368)
+#define KS2_DDR3BPLLCTL1		(KS2_DEVICE_STATE_CTRL_BASE + 0x36C)
+#define KS2_ARMPLLCTL0			(KS2_DEVICE_STATE_CTRL_BASE + 0x370)
+#define KS2_ARMPLLCTL1			(KS2_DEVICE_STATE_CTRL_BASE + 0x374)
+#define KS2_UARTPLLCTL0			(KS2_DEVICE_STATE_CTRL_BASE + 0x390)
+#define KS2_UARTPLLCTL1			(KS2_DEVICE_STATE_CTRL_BASE + 0x394)
+
+#define KS2_PLL_CNTRL_BASE		0x02310000
+#define KS2_CLOCK_BASE			KS2_PLL_CNTRL_BASE
+#define KS2_RSTCTRL_RSTYPE		(KS2_PLL_CNTRL_BASE + 0xe4)
+#define KS2_RSTCTRL			(KS2_PLL_CNTRL_BASE + 0xe8)
+#define KS2_RSTCTRL_RSCFG		(KS2_PLL_CNTRL_BASE + 0xec)
+#define KS2_RSTCTRL_KEY			0x5a69
+#define KS2_RSTCTRL_MASK		0xffff0000
+#define KS2_RSTCTRL_SWRST		0xfffe0000
+#define KS2_RSTYPE_PLL_SOFT		BIT(13)
+
+/* SPI */
+#ifdef CONFIG_SOC_K2G
+#define KS2_SPI0_BASE			0x21805400
+#define KS2_SPI1_BASE			0x21805800
+#define KS2_SPI2_BASE			0x21805c00
+#define KS2_SPI3_BASE			0x21806000
+#else
+#define KS2_SPI0_BASE			0x21000400
+#define KS2_SPI1_BASE			0x21000600
+#define KS2_SPI2_BASE			0x21000800
+#define KS2_SPI_BASE			KS2_SPI0_BASE
+#endif
+
+/* AEMIF */
+#define KS2_AEMIF_CNTRL_BASE       	0x21000a00
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE   KS2_AEMIF_CNTRL_BASE
+
+/* Flag from ks2_debug options to check if DSPs need to stay ON */
+#define DBG_LEAVE_DSPS_ON		0x1
+
+/* MSMC control */
+#define KS2_MSMC_CTRL_BASE		0x0bc00000
+#define KS2_MSMC_DATA_BASE		0x0c000000
+
+/* KS2 Generic Privilege ID Settings for MSMC2 */
+#define KS2_MSMC_SEGMENT_C6X_0		0
+#define KS2_MSMC_SEGMENT_C6X_1		1
+#define KS2_MSMC_SEGMENT_C6X_2		2
+#define KS2_MSMC_SEGMENT_C6X_3		3
+#define KS2_MSMC_SEGMENT_C6X_4		4
+#define KS2_MSMC_SEGMENT_C6X_5		5
+#define KS2_MSMC_SEGMENT_C6X_6		6
+#define KS2_MSMC_SEGMENT_C6X_7		7
+
+#define KS2_MSMC_SEGMENT_DEBUG		12
+
+/* KS2 HK/L/E MSMC PRIVIDs  for MSMC2 */
+#define K2HKLE_MSMC_SEGMENT_ARM		8
+#define K2HKLE_MSMC_SEGMENT_NETCP	9
+#define K2HKLE_MSMC_SEGMENT_QM_PDSP	10
+#define K2HKLE_MSMC_SEGMENT_PCIE0	11
+
+/* K2HK specific Privilege ID Settings */
+#define K2HKE_MSMC_SEGMENT_HYPERLINK	14
+
+/* K2L specific Privilege ID Settings */
+#define K2L_MSMC_SEGMENT_PCIE1		14
+
+/* K2E specific Privilege ID Settings */
+#define K2E_MSMC_SEGMENT_PCIE1		13
+#define K2E_MSMC_SEGMENT_TSIP		15
+
+/* K2G specific Privilege ID Settings */
+#define K2G_MSMC_SEGMENT_ARM		1
+#define K2G_MSMC_SEGMENT_ICSS0		2
+#define K2G_MSMC_SEGMENT_ICSS1		3
+#define K2G_MSMC_SEGMENT_NSS		4
+#define K2G_MSMC_SEGMENT_PCIE		5
+#define K2G_MSMC_SEGMENT_USB		6
+#define K2G_MSMC_SEGMENT_MLB		8
+#define K2G_MSMC_SEGMENT_PMMC		9
+#define K2G_MSMC_SEGMENT_DSS		10
+#define K2G_MSMC_SEGMENT_MMC		11
+
+/* MSMC segment size shift bits */
+#define KS2_MSMC_SEG_SIZE_SHIFT		12
+#define KS2_MSMC_MAP_SEG_NUM		(2 << (30 - KS2_MSMC_SEG_SIZE_SHIFT))
+#define KS2_MSMC_DST_SEG_BASE		(CONFIG_SYS_LPAE_SDRAM_BASE >> \
+					KS2_MSMC_SEG_SIZE_SHIFT)
+
+/* Device speed */
+#define KS2_REV1_DEVSPEED		(KS2_DEVICE_STATE_CTRL_BASE + 0xc98)
+#define KS2_EFUSE_BOOTROM		(KS2_DEVICE_STATE_CTRL_BASE + 0xc90)
+#define KS2_MISC_CTRL			(KS2_DEVICE_STATE_CTRL_BASE + 0xc7c)
+
+/* Queue manager */
+#ifdef CONFIG_SOC_K2G
+#define KS2_QM_BASE_ADDRESS		0x040C0000
+#define KS2_QM_CONF_BASE		0x04040000
+#define KS2_QM_DESC_SETUP_BASE		0x04080000
+#define KS2_QM_STATUS_RAM_BASE		0x0 /* K2G doesn't have it */
+#define KS2_QM_INTD_CONF_BASE		0x0
+#define KS2_QM_PDSP1_CMD_BASE		0x0
+#define KS2_QM_PDSP1_CTRL_BASE		0x0
+#define KS2_QM_PDSP1_IRAM_BASE		0x0
+#define KS2_QM_MANAGER_QUEUES_BASE	0x040c0000
+#define KS2_QM_MANAGER_Q_PROXY_BASE	0x04040200
+#define KS2_QM_QUEUE_STATUS_BASE	0x04100000
+#define KS2_QM_LINK_RAM_BASE		0x04020000
+#define KS2_QM_REGION_NUM		8
+#define KS2_QM_QPOOL_NUM		112
+#else
+#define KS2_QM_BASE_ADDRESS		0x23a80000
+#define KS2_QM_CONF_BASE		0x02a02000
+#define KS2_QM_DESC_SETUP_BASE		0x02a03000
+#define KS2_QM_STATUS_RAM_BASE		0x02a06000
+#define KS2_QM_INTD_CONF_BASE		0x02a0c000
+#define KS2_QM_PDSP1_CMD_BASE		0x02a20000
+#define KS2_QM_PDSP1_CTRL_BASE		0x02a0f000
+#define KS2_QM_PDSP1_IRAM_BASE		0x02a10000
+#define KS2_QM_MANAGER_QUEUES_BASE	0x02a80000
+#define KS2_QM_MANAGER_Q_PROXY_BASE	0x02ac0000
+#define KS2_QM_QUEUE_STATUS_BASE	0x02a40000
+#define KS2_QM_LINK_RAM_BASE		0x00100000
+#define KS2_QM_REGION_NUM		64
+#define KS2_QM_QPOOL_NUM		4000
+#endif
+
+/* USB */
+#define KS2_USB_SS_BASE			0x02680000
+#define KS2_USB_HOST_XHCI_BASE		(KS2_USB_SS_BASE + 0x10000)
+#define KS2_DEV_USB_PHY_BASE		0x02620738
+#define KS2_USB_PHY_CFG_BASE		0x02630000
+
+#define KS2_MAC_ID_BASE_ADDR		(KS2_DEVICE_STATE_CTRL_BASE + 0x110)
+
+/* SGMII SerDes */
+#define KS2_SGMII_SERDES_BASE		0x0232a000
+
+/* JTAG ID register */
+#define JTAGID_VARIANT_SHIFT	28
+#define JTAGID_VARIANT_MASK	(0xf << 28)
+#define JTAGID_PART_NUM_SHIFT	12
+#define JTAGID_PART_NUM_MASK	(0xffff << 12)
+
+/* PART NUMBER definitions */
+#define CPU_66AK2Hx	0xb981
+#define CPU_66AK2Ex	0xb9a6
+#define CPU_66AK2Lx	0xb9a7
+#define CPU_66AK2Gx	0xbb06
+
+/* Variant definitions */
+#define CPU_66AK2G1x	0x08
+
+/* DEVSPEED register */
+#define DEVSPEED_DEVSPEED_SHIFT	16
+#define DEVSPEED_DEVSPEED_MASK	(0xfff << 16)
+#define DEVSPEED_ARMSPEED_SHIFT	0
+#define DEVSPEED_ARMSPEED_MASK	0xfff
+#define DEVSPEED_NUMSPDS	12
+
+#ifdef CONFIG_SOC_K2HK
+#include <asm/arch/hardware-k2hk.h>
+#endif
+
+#ifdef CONFIG_SOC_K2E
+#include <asm/arch/hardware-k2e.h>
+#endif
+
+#ifdef CONFIG_SOC_K2L
+#include <asm/arch/hardware-k2l.h>
+#endif
+
+#ifdef CONFIG_SOC_K2G
+#include <asm/arch/hardware-k2g.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+static inline u16 get_part_number(void)
+{
+	u32 jtag_id = __raw_readl(KS2_JTAG_ID_REG);
+
+	return (jtag_id & JTAGID_PART_NUM_MASK) >> JTAGID_PART_NUM_SHIFT;
+}
+
+static inline u8 cpu_is_k2hk(void)
+{
+	return get_part_number() == CPU_66AK2Hx;
+}
+
+static inline u8 cpu_is_k2e(void)
+{
+	return get_part_number() == CPU_66AK2Ex;
+}
+
+static inline u8 cpu_is_k2l(void)
+{
+	return get_part_number() == CPU_66AK2Lx;
+}
+
+static inline u8 cpu_is_k2g(void)
+{
+	return get_part_number() == CPU_66AK2Gx;
+}
+
+static inline u8 cpu_revision(void)
+{
+	u32 jtag_id	= __raw_readl(KS2_JTAG_ID_REG);
+	u8 rev	= (jtag_id & JTAGID_VARIANT_MASK) >> JTAGID_VARIANT_SHIFT;
+
+	return rev;
+}
+
+int cpu_to_bus(u32 *ptr, u32 length);
+void sdelay(unsigned long);
+
+#endif
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/i2c_defs.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/i2c_defs.h
new file mode 100644
index 000000000..55251ee7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/i2c_defs.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * keystone: i2c driver definitions
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+#ifndef _I2C_DEFS_H_
+#define _I2C_DEFS_H_
+
+#define I2C0_BASE		0x02530000
+#define I2C1_BASE		0x02530400
+#define I2C2_BASE		0x02530800
+#define I2C_BASE		I2C0_BASE
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/mmc_host_def.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/mmc_host_def.h
new file mode 100644
index 000000000..120c7cc5c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/mmc_host_def.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2G: MMC
+ *
+ * (C) Copyright 2015
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef K2G_MMC_HOST_DEF_H
+#define K2G_MMC_HOST_DEF_H
+
+#include <asm/omap_mmc.h>
+
+/*
+ * OMAP HSMMC register definitions
+ */
+
+#define OMAP_HSMMC1_BASE	0x23000000
+#define OMAP_HSMMC2_BASE	0x23100000
+
+#endif /* K2G_MMC_HOST_DEF_H */
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/mon.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/mon.h
new file mode 100644
index 000000000..e1bef216d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/mon.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2HK: secure kernel command header file
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef _MACH_MON_H_
+#define _MACH_MON_H_
+
+int mon_install(u32 addr, u32 dpsc, u32 freq, u32 bm_addr);
+int mon_power_on(int core_id, void *ep);
+int mon_power_off(int core_id);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/msmc.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/msmc.h
new file mode 100644
index 000000000..3fe09ea59
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/msmc.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * MSMC controller
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef _MSMC_H_
+#define _MSMC_H_
+
+#include <asm/arch/hardware.h>
+
+enum mpax_seg_size {
+	MPAX_SEG_4K = 0x0b,
+	MPAX_SEG_8K,
+	MPAX_SEG_16K,
+	MPAX_SEG_32K,
+	MPAX_SEG_64K,
+	MPAX_SEG_128K,
+	MPAX_SEG_256K,
+	MPAX_SEG_512K,
+	MPAX_SEG_1M,
+	MPAX_SEG_2M,
+	MPAX_SEG_4M,
+	MPAX_SEG_8M,
+	MPAX_SEG_16M,
+	MPAX_SEG_32M,
+	MPAX_SEG_64M,
+	MPAX_SEG_128M,
+	MPAX_SEG_256M,
+	MPAX_SEG_512M,
+	MPAX_SEG_1G,
+	MPAX_SEG_2G,
+	MPAX_SEG_4G
+};
+
+void msmc_share_all_segments(int priv_id);
+void msmc_get_ses_mpax(int priv_id, int ses_pair, u32 *mpax);
+void msmc_set_ses_mpax(int priv_id, int ses_pair, u32 *mpax);
+void msmc_map_ses_segment(int priv_id, int ses_pair,
+			  u32 src_pfn, u32 dst_pfn, enum mpax_seg_size size);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/mux-k2g.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/mux-k2g.h
new file mode 100644
index 000000000..67d47f817
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/mux-k2g.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K2G: Pinmux configuration
+ *
+ * (C) Copyright 2015
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASM_ARCH_MUX_K2G_H
+#define __ASM_ARCH_MUX_K2G_H
+
+#include <common.h>
+#include <asm/io.h>
+
+#define K2G_PADCFG_REG	(KS2_DEVICE_STATE_CTRL_BASE + 0x1000)
+
+/*
+ * 20:19 - buffer class RW fixed
+ * 18    - rxactive (Input enabled for the pad ) 0 - Di; 1 - En;
+ * 17    - pulltypesel (0 - PULLDOWN; 1 - PULLUP);
+ * 16    - pulluden (0 - PULLUP/DOWN EN; 1 - DI);
+ * 3:0   - muxmode (available modes 0:5)
+ */
+
+#define PIN_IEN	(1 << 18) /* pin input enabled */
+#define PIN_PDIS	(1 << 16) /* pull up/down disabled */
+#define PIN_PTU	(1 << 17) /* pull up */
+#define PIN_PTD	(0 << 17) /* pull down */
+
+#define BUFFER_CLASS_B	(0 << 19)
+#define BUFFER_CLASS_C	(1 << 19)
+#define BUFFER_CLASS_D	(2 << 19)
+#define BUFFER_CLASS_E	(3 << 19)
+
+#define MODE(m)	((m) & 0x7)
+#define MAX_PIN_N	260
+
+#define MUX_CFG(value, index)  \
+	__raw_writel(\
+		     (value) | \
+		     (__raw_readl(K2G_PADCFG_REG + (index << 2)) & \
+		      (0x3 << 19)),\
+		     (K2G_PADCFG_REG + (index << 2))\
+		    );
+
+struct pin_cfg {
+	int	reg_inx;
+	u32	val;
+};
+
+static inline void configure_pin_mux(struct pin_cfg *pin_mux)
+{
+	if (!pin_mux)
+		return;
+
+	while ((pin_mux->reg_inx >= 0) && (pin_mux->reg_inx < MAX_PIN_N)) {
+		MUX_CFG(pin_mux->val, pin_mux->reg_inx);
+		pin_mux++;
+	}
+}
+
+#endif /* __ASM_ARCH_MUX_K2G_H */
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/psc_defs.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/psc_defs.h
new file mode 100644
index 000000000..f164f95bf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/psc_defs.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+#ifndef _PSC_DEFS_H_
+#define _PSC_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+/*
+ * FILE PURPOSE: Local Power Sleep Controller definitions
+ *
+ * FILE NAME: psc_defs.h
+ *
+ * DESCRIPTION: Provides local definitions for the power saver controller
+ *
+ */
+
+/* Register offsets */
+#define PSC_REG_PTCMD           0x120
+#define PSC_REG_PSTAT	        0x128
+#define PSC_REG_PDSTAT(x)       (0x200 + (4 * (x)))
+#define PSC_REG_PDCTL(x)        (0x300 + (4 * (x)))
+#define PSC_REG_MDCFG(x)        (0x600 + (4 * (x)))
+#define PSC_REG_MDSTAT(x)       (0x800 + (4 * (x)))
+#define PSC_REG_MDCTL(x)        (0xa00 + (4 * (x)))
+
+
+static inline u32 _boot_bit_mask(u32 x, u32 y)
+{
+	u32 val = (1 << (x - y + 1)) - 1;
+	return val << y;
+}
+
+static inline u32 boot_read_bitfield(u32 z, u32 x, u32 y)
+{
+	u32 val = z & _boot_bit_mask(x, y);
+	return val >> y;
+}
+
+static inline u32 boot_set_bitfield(u32 z, u32 f, u32 x, u32 y)
+{
+	u32 mask = _boot_bit_mask(x, y);
+
+	return (z & ~mask) | ((f << y) & mask);
+}
+
+/* PDCTL */
+#define PSC_REG_PDCTL_SET_NEXT(x, y)        boot_set_bitfield((x), (y), 0, 0)
+#define PSC_REG_PDCTL_SET_PDMODE(x, y)      boot_set_bitfield((x), (y), 15, 12)
+
+/* PDSTAT */
+#define PSC_REG_PDSTAT_GET_STATE(x)         boot_read_bitfield((x), 4, 0)
+
+/* MDCFG */
+#define PSC_REG_MDCFG_GET_PD(x)             boot_read_bitfield((x), 20, 16)
+#define PSC_REG_MDCFG_GET_RESET_ISO(x)      boot_read_bitfield((x), 14, 14)
+
+/* MDCTL */
+#define PSC_REG_MDCTL_SET_NEXT(x, y)        boot_set_bitfield((x), (y), 4, 0)
+#define PSC_REG_MDCTL_SET_LRSTZ(x, y)       boot_set_bitfield((x), (y), 8, 8)
+#define PSC_REG_MDCTL_GET_LRSTZ(x)          boot_read_bitfield((x), 8, 8)
+#define PSC_REG_MDCTL_SET_RESET_ISO(x, y)   boot_set_bitfield((x), (y), \
+								  12, 12)
+
+/* MDSTAT */
+#define PSC_REG_MDSTAT_GET_STATUS(x)        boot_read_bitfield((x), 5, 0)
+#define PSC_REG_MDSTAT_GET_LRSTZ(x)         boot_read_bitfield((x), 8, 8)
+#define PSC_REG_MDSTAT_GET_LRSTDONE(x)      boot_read_bitfield((x), 9, 9)
+#define PSC_REG_MDSTAT_GET_MRSTZ(x)         boot_read_bitfield((x), 10, 10)
+#define PSC_REG_MDSTAT_GET_MRSTDONE(x)      boot_read_bitfield((x), 11, 11)
+
+/* PDCTL states */
+#define PSC_REG_VAL_PDCTL_NEXT_ON           1
+#define PSC_REG_VAL_PDCTL_NEXT_OFF          0
+
+#define PSC_REG_VAL_PDCTL_PDMODE_SLEEP      0
+
+/* MDCTL states */
+#define PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE     0
+#define PSC_REG_VAL_MDCTL_NEXT_OFF              2
+#define PSC_REG_VAL_MDCTL_NEXT_ON               3
+
+/* MDSTAT states */
+#define PSC_REG_VAL_MDSTAT_STATE_ON             3
+#define PSC_REG_VAL_MDSTAT_STATE_ENABLE_IN_PROG 0x24
+#define PSC_REG_VAL_MDSTAT_STATE_OFF            2
+#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG1       0x20
+#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG2       0x21
+#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG3       0x22
+
+/*
+ * Timeout limit on checking PTSTAT. This is the number of times the
+ * wait function will be called before giving up.
+ */
+#define PSC_PTSTAT_TIMEOUT_LIMIT    100000
+
+u32 psc_get_domain_num(u32 mod_num);
+int psc_enable_module(u32 mod_num);
+int psc_disable_module(u32 mod_num);
+int psc_disable_domain(u32 domain_num);
+int psc_module_keep_in_reset_enabled(u32 mod_num, bool gate_clocks);
+int psc_module_release_from_reset(u32 mod_num);
+
+#endif /* _PSC_DEFS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-keystone/include/mach/xhci-keystone.h b/roms/u-boot/arch/arm/mach-keystone/include/mach/xhci-keystone.h
new file mode 100644
index 000000000..989b0c315
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/include/mach/xhci-keystone.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB 3.0 DRD Controller
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define USB3_PHY_REF_SSP_EN		BIT(29)
+#define USB3_PHY_OTG_VBUSVLDECTSEL	BIT(16)
+
+/* KEYSTONE2 XHCI PHY register structure */
+struct keystone_xhci_phy {
+	unsigned int phy_utmi;		/* ctl0 */
+	unsigned int phy_pipe;		/* ctl1 */
+	unsigned int phy_param_ctrl_1;	/* ctl2 */
+	unsigned int phy_param_ctrl_2;	/* ctl3 */
+	unsigned int phy_clock;		/* ctl4 */
+	unsigned int phy_pll;		/* ctl5 */
+};
diff --git a/roms/u-boot/arch/arm/mach-keystone/init.c b/roms/u-boot/arch/arm/mach-keystone/init.c
new file mode 100644
index 000000000..5b95f6050
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/init.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Keystone2: Architecture initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <ns16550.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/arch/msmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/psc_defs.h>
+#include <linux/bitops.h>
+
+#define MAX_PCI_PORTS		2
+enum pci_mode	{
+	ENDPOINT,
+	LEGACY_ENDPOINT,
+	ROOTCOMPLEX,
+};
+
+#define DEVCFG_MODE_MASK		(BIT(2) | BIT(1))
+#define DEVCFG_MODE_SHIFT		1
+
+void chip_configuration_unlock(void)
+{
+	__raw_writel(KS2_KICK0_MAGIC, KS2_KICK0);
+	__raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
+}
+
+#ifdef CONFIG_SOC_K2L
+void osr_init(void)
+{
+	u32 i;
+	u32 j;
+	u32 val;
+	u32 base = KS2_OSR_CFG_BASE;
+	u32 ecc_ctrl[KS2_OSR_NUM_RAM_BANKS];
+
+	/* Enable the OSR clock domain */
+	psc_enable_module(KS2_LPSC_OSR);
+
+	/* Disable OSR ECC check for all the ram banks */
+	for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++) {
+		val = i | KS2_OSR_ECC_VEC_TRIG_RD |
+			(KS2_OSR_ECC_CTRL << KS2_OSR_ECC_VEC_RD_ADDR_SH);
+
+		writel(val , base + KS2_OSR_ECC_VEC);
+
+		/**
+		 * wait till read is done.
+		 * Print should be added after earlyprintk support is added.
+		 */
+		for (j = 0; j < 10000; j++) {
+			val = readl(base + KS2_OSR_ECC_VEC);
+			if (val & KS2_OSR_ECC_VEC_RD_DONE)
+				break;
+		}
+
+		ecc_ctrl[i] = readl(base + KS2_OSR_ECC_CTRL) ^
+						KS2_OSR_ECC_CTRL_CHK;
+
+		writel(ecc_ctrl[i], KS2_MSMC_DATA_BASE + i * 4);
+		writel(ecc_ctrl[i], base + KS2_OSR_ECC_CTRL);
+	}
+
+	/* Reset OSR memory to all zeros */
+	for (i = 0; i < KS2_OSR_SIZE; i += 4)
+		writel(0, KS2_OSR_DATA_BASE + i);
+
+	/* Enable OSR ECC check for all the ram banks */
+	for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++)
+		writel(ecc_ctrl[i] |
+		       KS2_OSR_ECC_CTRL_CHK, base + KS2_OSR_ECC_CTRL);
+}
+#endif
+
+/* Function to set up PCIe mode */
+static void config_pcie_mode(int pcie_port,  enum pci_mode mode)
+{
+	u32 val = __raw_readl(KS2_DEVCFG);
+
+	if (pcie_port >= MAX_PCI_PORTS)
+		return;
+
+	/**
+	 * each pci port has two bits for mode and it starts at
+	 * bit 1. So use port number to get the right bit position.
+	 */
+	pcie_port <<= 1;
+	val &= ~(DEVCFG_MODE_MASK << pcie_port);
+	val |= ((mode << DEVCFG_MODE_SHIFT) << pcie_port);
+	__raw_writel(val, KS2_DEVCFG);
+}
+
+static void msmc_k2hkle_common_setup(void)
+{
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_0);
+	msmc_share_all_segments(K2HKLE_MSMC_SEGMENT_ARM);
+	msmc_share_all_segments(K2HKLE_MSMC_SEGMENT_NETCP);
+	msmc_share_all_segments(K2HKLE_MSMC_SEGMENT_QM_PDSP);
+	msmc_share_all_segments(K2HKLE_MSMC_SEGMENT_PCIE0);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_DEBUG);
+}
+
+static void msmc_k2hk_setup(void)
+{
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_1);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_2);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_3);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_4);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_5);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_6);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_7);
+	msmc_share_all_segments(K2HKE_MSMC_SEGMENT_HYPERLINK);
+}
+
+static inline void msmc_k2l_setup(void)
+{
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_1);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_2);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_3);
+	msmc_share_all_segments(K2L_MSMC_SEGMENT_PCIE1);
+}
+
+static inline void msmc_k2e_setup(void)
+{
+	msmc_share_all_segments(K2E_MSMC_SEGMENT_PCIE1);
+	msmc_share_all_segments(K2HKE_MSMC_SEGMENT_HYPERLINK);
+	msmc_share_all_segments(K2E_MSMC_SEGMENT_TSIP);
+}
+
+static void msmc_k2g_setup(void)
+{
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_C6X_0);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_ARM);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_ICSS0);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_ICSS1);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_NSS);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_PCIE);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_USB);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_MLB);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_PMMC);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_DSS);
+	msmc_share_all_segments(K2G_MSMC_SEGMENT_MMC);
+	msmc_share_all_segments(KS2_MSMC_SEGMENT_DEBUG);
+}
+
+int arch_cpu_init(void)
+{
+	chip_configuration_unlock();
+	icache_enable();
+
+	if (cpu_is_k2g()) {
+		msmc_k2g_setup();
+	} else {
+		msmc_k2hkle_common_setup();
+		if (cpu_is_k2e())
+			msmc_k2e_setup();
+		else if (cpu_is_k2l())
+			msmc_k2l_setup();
+		else
+			msmc_k2hk_setup();
+	}
+
+	/* Initialize the PCIe-0 to work as Root Complex */
+	config_pcie_mode(0, ROOTCOMPLEX);
+#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L)
+	/* Initialize the PCIe-1 to work as Root Complex */
+	config_pcie_mode(1, ROOTCOMPLEX);
+#endif
+#ifdef CONFIG_SOC_K2L
+	osr_init();
+#endif
+
+	/*
+	 * just initialise the COM2 port so that TI specific
+	 * UART register PWREMU_MGMT is initialized. Linux UART
+	 * driver doesn't handle this.
+	 */
+#ifndef CONFIG_DM_SERIAL
+	ns16550_init((struct ns16550 *)(CONFIG_SYS_NS16550_COM2),
+		     CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+#endif
+
+	return 0;
+}
+
+void reset_cpu(void)
+{
+	volatile u32 *rstctrl = (volatile u32 *)(KS2_RSTCTRL);
+	u32 tmp;
+
+	tmp = *rstctrl & KS2_RSTCTRL_MASK;
+	*rstctrl = tmp | KS2_RSTCTRL_KEY;
+
+	*rstctrl &= KS2_RSTCTRL_SWRST;
+
+	for (;;)
+		;
+}
+
+void enable_caches(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+#endif
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	u16 cpu = get_part_number();
+	u8 rev = cpu_revision();
+
+	puts("CPU: ");
+	switch (cpu) {
+	case CPU_66AK2Hx:
+		puts("66AK2Hx SR");
+		break;
+	case CPU_66AK2Lx:
+		puts("66AK2Lx SR");
+		break;
+	case CPU_66AK2Ex:
+		puts("66AK2Ex SR");
+		break;
+	case CPU_66AK2Gx:
+		puts("66AK2Gx");
+#ifdef CONFIG_SOC_K2G
+		{
+			int speed = get_max_arm_speed(speeds);
+			if (speed == SPD1000)
+				puts("-100 ");
+			else if (speed == SPD600)
+				puts("-60 ");
+			else
+				puts("-xx ");
+		}
+#endif
+		puts("SR");
+		break;
+	default:
+		puts("Unknown\n");
+	}
+
+	if (rev == 2)
+		puts("2.0\n");
+	else if (rev == 1)
+		puts("1.1\n");
+	else if (rev == 0)
+		puts("1.0\n");
+	else if (rev == 8)
+		puts("1.0\n");
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/keystone.c b/roms/u-boot/arch/arm/mach-keystone/keystone.c
new file mode 100644
index 000000000..efaabca5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/keystone.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Keystone EVM : Board initialization
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <env.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/psc_defs.h>
+#include <asm/arch/hardware.h>
+
+/**
+ * cpu_to_bus - swap bytes of the 32-bit data if the device is BE
+ * @ptr - array of data
+ * @length - lenght of data array
+ */
+int cpu_to_bus(u32 *ptr, u32 length)
+{
+	u32 i;
+
+	if (!(readl(KS2_DEVSTAT) & 0x1))
+		for (i = 0; i < length; i++, ptr++)
+			*ptr = cpu_to_be32(*ptr);
+
+	return 0;
+}
+
+static void turn_off_all_dsps(int num_dsps)
+{
+	int i;
+
+	for (i = 0; i < num_dsps; i++) {
+		if (psc_disable_module(i + KS2_LPSC_GEM_0))
+			printf("Cannot disable module for #%d DSP", i);
+
+		if (psc_disable_domain(i + KS2_GEM_0_PWR_DOMAIN))
+			printf("Cannot disable domain for #%d DSP", i);
+	}
+}
+
+int misc_init_r(void)
+{
+	char *env;
+	long ks2_debug = 0;
+
+	env = env_get("ks2_debug");
+
+	if (env)
+		ks2_debug = simple_strtol(env, NULL, 0);
+
+	if ((ks2_debug & DBG_LEAVE_DSPS_ON) == 0)
+		turn_off_all_dsps(KS2_NUM_DSPS);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-keystone/mon.c b/roms/u-boot/arch/arm/mach-keystone/mon.c
new file mode 100644
index 000000000..58995d73a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/mon.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * K2x: Secure commands file
+ *
+ * Copyright (C) 2012-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <hang.h>
+#include <image.h>
+#include <asm/unaligned.h>
+#include <common.h>
+#include <command.h>
+#include <mach/mon.h>
+#include <spl.h>
+asm(".arch_extension sec\n\t");
+
+int mon_install(u32 addr, u32 dpsc, u32 freq, u32 bm_addr)
+{
+	int result;
+
+	__asm__ __volatile__ (
+		"stmfd r13!, {lr}\n"
+		"mov r0, %1\n"
+		"mov r1, %2\n"
+		"mov r2, %3\n"
+		"mov r3, %4\n"
+		"blx r0\n"
+		"mov %0, r0\n"
+		"ldmfd r13!, {lr}\n"
+		: "=&r" (result)
+		: "r" (addr), "r" (dpsc), "r" (freq), "r" (bm_addr)
+		: "cc", "r0", "r1", "r2", "r3", "memory");
+	return result;
+}
+
+int mon_power_on(int core_id, void *ep)
+{
+	int result;
+
+	asm volatile (
+		"stmfd  r13!, {lr}\n"
+		"mov r1, %1\n"
+		"mov r2, %2\n"
+		"mov r0, #0\n"
+		"smc	#0\n"
+		"mov %0, r0\n"
+		"ldmfd  r13!, {lr}\n"
+		: "=&r" (result)
+		: "r" (core_id), "r" (ep)
+		: "cc", "r0", "r1", "r2", "memory");
+	return  result;
+}
+
+int mon_power_off(int core_id)
+{
+	int result;
+
+	asm volatile (
+		"stmfd  r13!, {lr}\n"
+		"mov r1, %1\n"
+		"mov r0, #1\n"
+		"smc	#1\n"
+		"mov %0, r0\n"
+		"ldmfd  r13!, {lr}\n"
+		: "=&r" (result)
+		: "r" (core_id)
+		: "cc", "r0", "r1", "memory");
+	return  result;
+}
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+#define KS2_HS_SEC_HEADER_LEN	0x60
+#define KS2_HS_SEC_TAG_OFFSET	0x34
+#define KS2_AUTH_CMD		130
+
+/**
+ * k2_hs_bm_auth() - Invokes security functions using a
+ * proprietary TI interface. This binary and source for
+ * this is available in the secure development package or
+ * SECDEV. For details on how to access this please refer
+ * doc/README.ti-secure
+ *
+ * @cmd: Secure monitor command
+ * @arg1: Argument for command
+ *
+ * returns non-zero value on success, zero on error
+ */
+static int k2_hs_bm_auth(int cmd, void *arg1)
+{
+	int result;
+
+	asm volatile (
+		"stmfd  r13!, {r4-r12, lr}\n"
+		"mov r0, %1\n"
+		"mov r1, %2\n"
+		"smc #2\n"
+		"mov %0, r0\n"
+		"ldmfd r13!, {r4-r12, lr}\n"
+		: "=&r" (result)
+		: "r" (cmd), "r" (arg1)
+		: "cc", "r0", "r1", "memory");
+
+	return  result;
+}
+
+void board_fit_image_post_process(void **p_image, size_t *p_size)
+{
+	int result = 0;
+	void *image = *p_image;
+
+	if (strncmp(image + KS2_HS_SEC_TAG_OFFSET, "KEYS", 4)) {
+		printf("No signature found in image!\n");
+		hang();
+	}
+
+	result = k2_hs_bm_auth(KS2_AUTH_CMD, image);
+	if (result == 0) {
+		printf("Authentication failed!\n");
+		hang();
+	}
+
+	/*
+	 * Overwrite the image headers after authentication
+	 * and decryption. Update size to reflect removal
+	 * of header and restore original file size.
+	 */
+	*p_size = get_unaligned_le32(image + (*p_size - 4));
+	memcpy(image, image + KS2_HS_SEC_HEADER_LEN, *p_size);
+
+	/*
+	 * Output notification of successful authentication to re-assure the
+	 * user that the secure code is being processed as expected. However
+	 * suppress any such log output in case of building for SPL and booting
+	 * via YMODEM. This is done to avoid disturbing the YMODEM serial
+	 * protocol transactions.
+	 */
+	if (!(IS_ENABLED(CONFIG_SPL_BUILD) &&
+	      IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) &&
+	      spl_boot_device() == BOOT_DEVICE_UART))
+		printf("Authentication passed\n");
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-keystone/msmc.c b/roms/u-boot/arch/arm/mach-keystone/msmc.c
new file mode 100644
index 000000000..f5cadfbf6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/msmc.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MSMC controller utilities
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <asm/arch/msmc.h>
+
+struct mpax {
+	u32	mpaxl;
+	u32	mpaxh;
+};
+
+struct msms_regs {
+	u32	pid;
+	u32	_res_04;
+	u32	smcerrar;
+	u32	smcerrxr;
+	u32	smedcc;
+	u32	smcea;
+	u32	smsecc;
+	u32	smpfar;
+	u32	smpfxr;
+	u32	smpfr;
+	u32	smpfcr;
+	u32	_res_2c;
+	u32	sbndc[8];
+	u32	sbndm;
+	u32	sbnde;
+	u32	_res_58;
+	u32	cfglck;
+	u32	cfgulck;
+	u32	cfglckstat;
+	u32	sms_mpax_lck;
+	u32	sms_mpax_ulck;
+	u32	sms_mpax_lckstat;
+	u32	ses_mpax_lck;
+	u32	ses_mpax_ulck;
+	u32	ses_mpax_lckstat;
+	u32	smestat;
+	u32	smirstat;
+	u32	smirc;
+	u32	smiestat;
+	u32	smiec;
+	u32	_res_94_c0[12];
+	u32	smncerrar;
+	u32	smncerrxr;
+	u32	smncea;
+	u32	_res_d0_1fc[76];
+	struct mpax sms[16][8];
+	struct mpax ses[16][8];
+};
+
+
+void msmc_share_all_segments(int priv_id)
+{
+	struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
+	int j;
+
+	for (j = 0; j < 8; j++) {
+		msmc->sms[priv_id][j].mpaxh &= 0xffffff7ful;
+		msmc->ses[priv_id][j].mpaxh &= 0xffffff7ful;
+	}
+}
+
+void msmc_map_ses_segment(int priv_id, int ses_pair,
+			  u32 src_pfn, u32 dst_pfn, enum mpax_seg_size size)
+{
+	struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
+
+	msmc->ses[priv_id][ses_pair].mpaxh = src_pfn << 12 |
+					     (size & 0x1f) | 0x80;
+	msmc->ses[priv_id][ses_pair].mpaxl = dst_pfn << 8 | 0x3f;
+}
+
+void msmc_get_ses_mpax(int priv_id, int ses_pair, u32 *mpax)
+{
+	struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
+
+	*mpax++ = msmc->ses[priv_id][ses_pair].mpaxl;
+	*mpax = msmc->ses[priv_id][ses_pair].mpaxh;
+}
+
+void msmc_set_ses_mpax(int priv_id, int ses_pair, u32 *mpax)
+{
+	struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
+
+	msmc->ses[priv_id][ses_pair].mpaxl = *mpax++;
+	msmc->ses[priv_id][ses_pair].mpaxh = *mpax;
+}
diff --git a/roms/u-boot/arch/arm/mach-keystone/psc.c b/roms/u-boot/arch/arm/mach-keystone/psc.c
new file mode 100644
index 000000000..145aff8ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-keystone/psc.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Keystone: PSC configuration module
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ */
+
+#include <common.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/psc_defs.h>
+
+/**
+ * psc_delay() - delay for psc
+ *
+ * Return: 10
+ */
+int psc_delay(void)
+{
+	udelay(10);
+	return 10;
+}
+
+/**
+ * psc_wait() - Wait for end of transitional state
+ * @domain_num: GPSC domain number
+ *
+ * Polls pstat for the selected domain and waits for transitions to be complete.
+ * Since this is boot loader code it is *ASSUMED* that interrupts are disabled
+ * and no other core is mucking around with the psc at the same time.
+ *
+ * Return: 0 when the domain is free. Returns -1 if a timeout occurred waiting
+ * for the completion.
+ */
+int psc_wait(u32 domain_num)
+{
+	u32 retry;
+	u32 ptstat;
+
+	/*
+	 * Do nothing if the power domain is in transition. This should never
+	 * happen since the boot code is the only software accesses psc.
+	 * It's still remotely possible that the hardware state machines
+	 * initiate transitions.
+	 * Don't trap if the domain (or a module in this domain) is
+	 * stuck in transition.
+	 */
+	retry = 0;
+
+	do {
+		ptstat = __raw_readl(KS2_PSC_BASE + PSC_REG_PSTAT);
+		ptstat = ptstat & (1 << domain_num);
+	} while ((ptstat != 0) && ((retry += psc_delay()) <
+		 PSC_PTSTAT_TIMEOUT_LIMIT));
+
+	if (retry >= PSC_PTSTAT_TIMEOUT_LIMIT)
+		return -1;
+
+	return 0;
+}
+
+/**
+ * psc_get_domain_num() - Get the domain number
+ * @mod_num:	LPSC module number
+ */
+u32 psc_get_domain_num(u32 mod_num)
+{
+	u32 domain_num;
+
+	/* Get the power domain associated with the module number */
+	domain_num = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num));
+	domain_num = PSC_REG_MDCFG_GET_PD(domain_num);
+
+	return domain_num;
+}
+
+/**
+ * psc_set_state() - powers up/down a module
+ * @mod_num:	LPSC module number
+ * @state:	1 to enable, 0 to disable.
+ *
+ * Powers up/down the requested module and the associated power domain if
+ * required. No action is taken it the module is already powered up/down.
+ * This only controls modules. The domain in which the module resides will
+ * be left in the power on state. Multiple modules can exist in a power
+ * domain, so powering down the domain based on a single module is not done.
+ *
+ * Return: 0 on success, -1 if the module can't be powered up, or if there is a
+ * timeout waiting for the transition.
+ */
+int psc_set_state(u32 mod_num, u32 state)
+{
+	u32 domain_num;
+	u32 pdctl;
+	u32 mdctl;
+	u32 ptcmd;
+	u32 reset_iso;
+	u32 v;
+
+	/*
+	 * Get the power domain associated with the module number, and reset
+	 * isolation functionality
+	 */
+	v = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num));
+	domain_num = PSC_REG_MDCFG_GET_PD(v);
+	reset_iso  = PSC_REG_MDCFG_GET_RESET_ISO(v);
+
+	/* Wait for the status of the domain/module to be non-transitional */
+	if (psc_wait(domain_num) != 0)
+		return -1;
+
+	/*
+	 * Perform configuration even if the current status matches the
+	 * existing state
+	 *
+	 * Set the next state of the power domain to on. It's OK if the domain
+	 * is always on. This code will not ever power down a domain, so no
+	 * change is made if the new state is power down.
+	 */
+	if (state == PSC_REG_VAL_MDCTL_NEXT_ON) {
+		pdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num));
+		pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl,
+					       PSC_REG_VAL_PDCTL_NEXT_ON);
+		__raw_writel(pdctl, KS2_PSC_BASE + PSC_REG_PDCTL(domain_num));
+	}
+
+	/* Set the next state for the module to enabled/disabled */
+	mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	mdctl = PSC_REG_MDCTL_SET_NEXT(mdctl, state);
+	mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, reset_iso);
+	__raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+
+	/* Trigger the enable */
+	ptcmd = __raw_readl(KS2_PSC_BASE + PSC_REG_PTCMD);
+	ptcmd |= (u32)(1<<domain_num);
+	__raw_writel(ptcmd, KS2_PSC_BASE + PSC_REG_PTCMD);
+
+	/* Wait on the complete */
+	return psc_wait(domain_num);
+}
+
+/**
+ * psc_enable_module() - power up a module
+ * @mod_num:	LPSC module number
+ *
+ * Powers up the requested module and the associated power domain
+ * if required. No action is taken it the module is already powered up.
+ *
+ * Return: 0 on success, -1 if the module can't be powered up, or
+ * if there is a timeout waiting for the transition.
+ *
+ */
+int psc_enable_module(u32 mod_num)
+{
+	u32 mdctl;
+
+	/* Set the bit to apply reset */
+	mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	if ((mdctl & 0x3f) == PSC_REG_VAL_MDSTAT_STATE_ON)
+		return 0;
+
+	return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_ON);
+}
+
+/**
+ * psc_disable_module() - Power down a module
+ * @mod_num:	LPSC module number
+ *
+ * Return: 0 on success, -1 on failure or timeout.
+ */
+int psc_disable_module(u32 mod_num)
+{
+	u32 mdctl;
+
+	/* Set the bit to apply reset */
+	mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	if ((mdctl & 0x3f) == 0)
+		return 0;
+	mdctl = PSC_REG_MDCTL_SET_LRSTZ(mdctl, 0);
+	__raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+
+	return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE);
+}
+
+/**
+ * psc_set_reset_iso() - Set the reset isolation bit in mdctl
+ * @mod_num:	LPSC module number
+ *
+ * The reset isolation enable bit is set. The state of the module is not
+ * changed.
+ *
+ * Return: 0 if the module config showed that reset isolation is supported.
+ * Returns 1 otherwise. This is not an error, but setting the bit in mdctl
+ * has no effect.
+ */
+int psc_set_reset_iso(u32 mod_num)
+{
+	u32 v;
+	u32 mdctl;
+
+	/* Set the reset isolation bit */
+	mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, 1);
+	__raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+
+	v = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num));
+	if (PSC_REG_MDCFG_GET_RESET_ISO(v) == 1)
+		return 0;
+
+	return 1;
+}
+
+/**
+ * psc_disable_domain() - Disable a power domain
+ * @domain_num: GPSC domain number
+ */
+int psc_disable_domain(u32 domain_num)
+{
+	u32 pdctl;
+	u32 ptcmd;
+
+	pdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num));
+	pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_OFF);
+	pdctl = PSC_REG_PDCTL_SET_PDMODE(pdctl, PSC_REG_VAL_PDCTL_PDMODE_SLEEP);
+	__raw_writel(pdctl, KS2_PSC_BASE + PSC_REG_PDCTL(domain_num));
+
+	ptcmd = __raw_readl(KS2_PSC_BASE + PSC_REG_PTCMD);
+	ptcmd |= (u32)(1 << domain_num);
+	__raw_writel(ptcmd, KS2_PSC_BASE + PSC_REG_PTCMD);
+
+	return psc_wait(domain_num);
+}
+
+/**
+ * psc_module_keep_in_reset_enabled() - Keep module in enabled,in-reset state
+ * @mod_num:	LPSC module number
+ * @gate_clocks: Can the clocks be gated on this module?
+ *
+ * Enable the module, but do not release the module from local reset. This is
+ * necessary for many processor systems on keystone SoCs to allow for system
+ * initialization from a master processor prior to releasing the processor
+ * from reset.
+ */
+int psc_module_keep_in_reset_enabled(u32 mod_num, bool gate_clocks)
+{
+	u32 mdctl, ptcmd, mdstat;
+	u32 next_state;
+	int domain_num = psc_get_domain_num(mod_num);
+	int timeout = 100000;
+
+	/* Wait for any previous transitions to complete */
+	psc_wait(domain_num);
+	mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	/* Should be set 0 to assert Local reset */
+	if ((mdctl & PSC_REG_MDCTL_SET_LRSTZ(mdctl, 1))) {
+		mdctl = PSC_REG_MDCTL_SET_LRSTZ(mdctl, 0);
+		__raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+		/* Wait for transition to take place */
+		psc_wait(domain_num);
+	}
+
+	/* Clear Module reset */
+	mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	next_state = gate_clocks ? PSC_REG_VAL_MDCTL_NEXT_OFF :
+			PSC_REG_VAL_MDCTL_NEXT_ON;
+	mdctl = PSC_REG_MDCTL_SET_NEXT(mdctl, next_state);
+	__raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	/* Trigger PD transition */
+	ptcmd = __raw_readl(KS2_PSC_BASE + PSC_REG_PTCMD);
+	ptcmd |= (u32)(1 << domain_num);
+	__raw_writel(ptcmd, KS2_PSC_BASE + PSC_REG_PTCMD);
+	psc_wait(domain_num);
+
+	mdstat = __raw_readl(KS2_PSC_BASE + PSC_REG_MDSTAT(mod_num));
+	while (timeout) {
+		mdstat = __raw_readl(KS2_PSC_BASE + PSC_REG_MDSTAT(mod_num));
+
+		if (!(PSC_REG_MDSTAT_GET_STATUS(mdstat) & 0x30) &&
+		    PSC_REG_MDSTAT_GET_MRSTDONE(mdstat) &&
+		    PSC_REG_MDSTAT_GET_LRSTDONE(mdstat))
+			break;
+		timeout--;
+	}
+
+	if (!timeout) {
+		printf("%s: Timedout waiting for mdstat(0x%08x) to change\n",
+		       __func__, mdstat);
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+/**
+ * psc_module_release_from_reset() - Release the module from reset
+ * @mod_num:	LPSC module number
+ *
+ * This is the follow through for the command 'psc_module_keep_in_reset_enabled'
+ * Allowing the module to be released from reset once all required inits are
+ * complete for the module. Typically, this allows the processor module to start
+ * execution.
+ */
+int psc_module_release_from_reset(u32 mod_num)
+{
+	u32 mdctl, mdstat;
+	int domain_num = psc_get_domain_num(mod_num);
+	int timeout = 100000;
+
+	/* Wait for any previous transitions to complete */
+	psc_wait(domain_num);
+	mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+	/* Should be set to 1 to de-assert Local reset */
+	if ((mdctl & PSC_REG_MDCTL_SET_LRSTZ(mdctl, 0))) {
+		mdctl = PSC_REG_MDCTL_SET_LRSTZ(mdctl, 1);
+		__raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num));
+		/* Wait for transition to take place */
+		psc_wait(domain_num);
+	}
+	mdstat = __raw_readl(KS2_PSC_BASE + PSC_REG_MDSTAT(mod_num));
+	while (timeout) {
+		mdstat = __raw_readl(KS2_PSC_BASE + PSC_REG_MDSTAT(mod_num));
+
+		if (!(PSC_REG_MDSTAT_GET_STATUS(mdstat) & 0x30) &&
+		    PSC_REG_MDSTAT_GET_MRSTDONE(mdstat) &&
+		    PSC_REG_MDSTAT_GET_LRSTDONE(mdstat))
+			break;
+		timeout--;
+	}
+
+	if (!timeout) {
+		printf("%s: Timedout waiting for mdstat(0x%08x) to change\n",
+		       __func__, mdstat);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/Kconfig b/roms/u-boot/arch/arm/mach-kirkwood/Kconfig
new file mode 100644
index 000000000..cb4e9f29e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/Kconfig
@@ -0,0 +1,90 @@
+if ARCH_KIRKWOOD
+
+choice
+	prompt "Marvell Kirkwood board select"
+	optional
+
+config TARGET_OPENRD
+	bool "Marvell OpenRD Board"
+
+config TARGET_DREAMPLUG
+	bool "DreamPlug Board"
+
+config TARGET_DS109
+	bool "Synology DS109"
+
+config TARGET_GURUPLUG
+	bool "GuruPlug Board"
+
+config TARGET_SHEEVAPLUG
+	bool "SheevaPlug Board"
+
+config TARGET_LSXL
+	bool "lsxl Board"
+
+config TARGET_POGO_E02
+	bool "pogo_e02 Board"
+
+config TARGET_DNS325
+	bool "dns325 Board"
+
+config TARGET_ICONNECT
+	bool "iconnect Board"
+
+config TARGET_KM_KIRKWOOD
+	bool "KM Kirkwood Board"
+	select VENDOR_KM
+
+config TARGET_NET2BIG_V2
+	bool "LaCie 2Big Network v2 NAS Board"
+
+config TARGET_NETSPACE_V2
+	bool "LaCie netspace_v2 Board"
+
+config TARGET_IB62X0
+	bool "ib62x0 Board"
+
+config TARGET_DOCKSTAR
+	bool "Dockstar Board"
+
+config TARGET_GOFLEXHOME
+	bool "GoFlex Home Board"
+
+config TARGET_NAS220
+	bool "BlackArmor NAS220"
+
+config TARGET_NSA310S
+	bool "Zyxel NSA310S"
+
+config TARGET_SBx81LIFKW
+	bool "Allied Telesis SBx81GS24/SBx81GT40/SBx81XS6/SBx81XS16"
+
+config TARGET_SBx81LIFXCAT
+	bool "Allied Telesis SBx81GP24/SBx81GT24"
+
+endchoice
+
+config SYS_SOC
+	default "kirkwood"
+
+source "board/Marvell/openrd/Kconfig"
+source "board/Marvell/dreamplug/Kconfig"
+source "board/Synology/ds109/Kconfig"
+source "board/Marvell/guruplug/Kconfig"
+source "board/Marvell/sheevaplug/Kconfig"
+source "board/buffalo/lsxl/Kconfig"
+source "board/cloudengines/pogo_e02/Kconfig"
+source "board/d-link/dns325/Kconfig"
+source "board/iomega/iconnect/Kconfig"
+source "board/keymile/Kconfig"
+source "board/LaCie/net2big_v2/Kconfig"
+source "board/LaCie/netspace_v2/Kconfig"
+source "board/raidsonic/ib62x0/Kconfig"
+source "board/Seagate/dockstar/Kconfig"
+source "board/Seagate/goflexhome/Kconfig"
+source "board/Seagate/nas220/Kconfig"
+source "board/zyxel/nsa310s/Kconfig"
+source "board/alliedtelesis/SBx81LIFKW/Kconfig"
+source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/Makefile b/roms/u-boot/arch/arm/mach-kirkwood/Makefile
new file mode 100644
index 000000000..3b2eef8d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+obj-y	= cpu.o
+obj-y	+= cache.o
+obj-y	+= mpp.o
+
+# cpu.o and cache.o contain CP15 instructions which cannot be run in
+# Thumb state, so build them for ARM state even with CONFIG_SYS_THUMB_BUILD
+
+CFLAGS_cpu.o := -marm
+CFLAGS_cache.o := -marm
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/cache.c b/roms/u-boot/arch/arm/mach-kirkwood/cache.c
new file mode 100644
index 000000000..009b7deec
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/cache.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2012 Michael Walle
+ * Michael Walle <michael@walle.cc>
+ */
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/cache.h>
+
+#define FEROCEON_EXTRA_FEATURE_L2C_EN (1<<22)
+
+void l2_cache_disable()
+{
+	u32 ctrl;
+
+	ctrl = readfr_extra_feature_reg();
+	ctrl &= ~FEROCEON_EXTRA_FEATURE_L2C_EN;
+	writefr_extra_feature_reg(ctrl);
+}
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/cpu.c b/roms/u-boot/arch/arm/mach-kirkwood/cpu.c
new file mode 100644
index 000000000..339ae7fd2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/cpu.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <env.h>
+#include <init.h>
+#include <log.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <mvebu_mmc.h>
+
+void reset_cpu(void)
+{
+	struct kwcpu_registers *cpureg =
+	    (struct kwcpu_registers *)KW_CPU_REG_BASE;
+
+	writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
+		&cpureg->rstoutn_mask);
+	writel(readl(&cpureg->sys_soft_rst) | 1,
+		&cpureg->sys_soft_rst);
+	while (1) ;
+}
+
+/*
+ * Window Size
+ * Used with the Base register to set the address window size and location.
+ * Must be programmed from LSB to MSB as sequence of ones followed by
+ * sequence of zeros. The number of ones specifies the size of the window in
+ * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
+ * NOTE: A value of 0x0 specifies 64-KByte size.
+ */
+unsigned int kw_winctrl_calcsize(unsigned int sizeval)
+{
+	int i;
+	unsigned int j = 0;
+	u32 val = sizeval >> 1;
+
+	for (i = 0; val >= 0x10000; i++) {
+		j |= (1 << i);
+		val = val >> 1;
+	}
+	return (0x0000ffff & j);
+}
+
+static struct mbus_win windows[] = {
+	/* Window 0: PCIE MEM address space */
+	{ KW_DEFADR_PCI_MEM, 1024 * 1024 * 256,
+	  KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_MEM },
+
+	/* Window 1: PCIE IO address space */
+	{ KW_DEFADR_PCI_IO, 1024 * 64,
+	  KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_IO },
+
+	/* Window 2: NAND Flash address space */
+	{ KW_DEFADR_NANDF, 1024 * 1024 * 128,
+	  KWCPU_TARGET_MEMORY, KWCPU_ATTR_NANDFLASH },
+
+	/* Window 3: SPI Flash address space */
+	{ KW_DEFADR_SPIF, 1024 * 1024 * 128,
+	  KWCPU_TARGET_MEMORY, KWCPU_ATTR_SPIFLASH },
+
+	/* Window 4: BOOT Memory address space */
+	{ KW_DEFADR_BOOTROM, 1024 * 1024 * 128,
+	  KWCPU_TARGET_MEMORY, KWCPU_ATTR_BOOTROM },
+
+	/* Window 5: Security SRAM address space */
+	{ KW_DEFADR_SASRAM, 1024 * 64,
+	  KWCPU_TARGET_SASRAM, KWCPU_ATTR_SASRAM },
+};
+
+/*
+ * SYSRSTn Duration Counter Support
+ *
+ * Kirkwood SoC implements a hardware-based SYSRSTn duration counter.
+ * When SYSRSTn is asserted low, a SYSRSTn duration counter is running.
+ * The SYSRSTn duration counter is useful for implementing a manufacturer
+ * or factory reset. Upon a long reset assertion that is greater than a
+ * pre-configured environment variable value for sysrstdelay,
+ * The counter value is stored in the SYSRSTn Length Counter Register
+ * The counter is based on the 25-MHz reference clock (40ns)
+ * It is a 29-bit counter, yielding a maximum counting duration of
+ * 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value,
+ * it remains at this value until counter reset is triggered by setting
+ * bit 31 of KW_REG_SYSRST_CNT
+ */
+static void kw_sysrst_action(void)
+{
+	int ret;
+	char *s = env_get("sysrstcmd");
+
+	if (!s) {
+		debug("Error.. %s failed, check sysrstcmd\n",
+			__FUNCTION__);
+		return;
+	}
+
+	debug("Starting %s process...\n", __FUNCTION__);
+	ret = run_command(s, 0);
+	if (ret != 0)
+		debug("Error.. %s failed\n", __FUNCTION__);
+	else
+		debug("%s process finished\n", __FUNCTION__);
+}
+
+static void kw_sysrst_check(void)
+{
+	u32 sysrst_cnt, sysrst_dly;
+	char *s;
+
+	/*
+	 * no action if sysrstdelay environment variable is not defined
+	 */
+	s = env_get("sysrstdelay");
+	if (s == NULL)
+		return;
+
+	/* read sysrstdelay value */
+	sysrst_dly = (u32) simple_strtoul(s, NULL, 10);
+
+	/* read SysRst Length counter register (bits 28:0) */
+	sysrst_cnt = (0x1fffffff & readl(KW_REG_SYSRST_CNT));
+	debug("H/w Rst hold time: %d.%d secs\n",
+		sysrst_cnt / SYSRST_CNT_1SEC_VAL,
+		sysrst_cnt % SYSRST_CNT_1SEC_VAL);
+
+	/* clear the counter for next valid read*/
+	writel(1 << 31, KW_REG_SYSRST_CNT);
+
+	/*
+	 * sysrst_action:
+	 * if H/w Reset key is pressed and hold for time
+	 * more than sysrst_dly in seconds
+	 */
+	if (sysrst_cnt >= SYSRST_CNT_1SEC_VAL * sysrst_dly)
+		kw_sysrst_action();
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char *rev = "??";
+	u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
+	u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;
+
+	if ((readl(KW_REG_DEVICE_ID) & 0x03) > 2) {
+		printf("Error.. %s:Unsupported Kirkwood SoC 88F%04x\n", __FUNCTION__, devid);
+		return -1;
+	}
+
+	switch (revid) {
+	case 0:
+		if (devid == 0x6281)
+			rev = "Z0";
+		else if (devid == 0x6282)
+			rev = "A0";
+		break;
+	case 1:
+		rev = "A1";
+		break;
+	case 2:
+		rev = "A0";
+		break;
+	case 3:
+		rev = "A1";
+		break;
+	default:
+		break;
+	}
+
+	printf("SoC:   Kirkwood 88F%04x_%s\n", devid, rev);
+	return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+	u32 reg;
+	struct kwcpu_registers *cpureg =
+		(struct kwcpu_registers *)KW_CPU_REG_BASE;
+
+	/* Linux expects the internal registers to be at 0xf1000000 */
+	writel(KW_REGS_PHY_BASE, KW_OFFSET_REG);
+
+	/* Enable and invalidate L2 cache in write through mode */
+	writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg);
+	invalidate_l2_cache();
+
+#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8
+	/*
+	 * Configures the I/O voltage of the pads connected to Egigabit
+	 * Ethernet interface to 1.8V
+	 * By default it is set to 3.3V
+	 */
+	reg = readl(KW_REG_MPP_OUT_DRV_REG);
+	reg |= (1 << 7);
+	writel(reg, KW_REG_MPP_OUT_DRV_REG);
+#endif
+#ifdef CONFIG_KIRKWOOD_EGIGA_INIT
+	/*
+	 * Set egiga port0/1 in normal functional mode
+	 * This is required becasue on kirkwood by default ports are in reset mode
+	 * OS egiga driver may not have provision to set them in normal mode
+	 * and if u-boot is build without network support, network may fail at OS level
+	 */
+	reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0));
+	reg &= ~(1 << 4);	/* Clear PortReset Bit */
+	writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0)));
+	reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1));
+	reg &= ~(1 << 4);	/* Clear PortReset Bit */
+	writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1)));
+#endif
+#ifdef CONFIG_KIRKWOOD_PCIE_INIT
+	/*
+	 * Enable PCI Express Port0
+	 */
+	reg = readl(&cpureg->ctrl_stat);
+	reg |= (1 << 0);	/* Set PEX0En Bit */
+	writel(reg, &cpureg->ctrl_stat);
+#endif
+	return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
+/*
+ * SOC specific misc init
+ */
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+	volatile u32 temp;
+
+	/*CPU streaming & write allocate */
+	temp = readfr_extra_feature_reg();
+	temp &= ~(1 << 28);	/* disable wr alloc */
+	writefr_extra_feature_reg(temp);
+
+	temp = readfr_extra_feature_reg();
+	temp &= ~(1 << 29);	/* streaming disabled */
+	writefr_extra_feature_reg(temp);
+
+	/* L2Cache settings */
+	temp = readfr_extra_feature_reg();
+	/* Disable L2C pre fetch - Set bit 24 */
+	temp |= (1 << 24);
+	/* enable L2C - Set bit 22 */
+	temp |= (1 << 22);
+	writefr_extra_feature_reg(temp);
+
+	/* Change reset vector to address 0x0 */
+	temp = get_cr();
+	set_cr(temp & ~CR_V);
+
+	/* Configure mbus windows */
+	mvebu_mbus_probe(windows, ARRAY_SIZE(windows));
+
+	/* checks and execute resset to factory event */
+	kw_sysrst_check();
+
+	return 0;
+}
+#endif /* CONFIG_ARCH_MISC_INIT */
+
+#ifdef CONFIG_MVGBE
+int cpu_eth_init(struct bd_info *bis)
+{
+	mvgbe_initialize(bis);
+	return 0;
+}
+#endif
+
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/include/mach/config.h b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/config.h
new file mode 100644
index 000000000..f5538f4a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/config.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Lei Wen <leiwen@marvell.com>
+ */
+
+/*
+ * This file should be included in board config header file.
+ *
+ * It supports common definitions for Kirkwood platform
+ */
+
+#ifndef _KW_CONFIG_H
+#define _KW_CONFIG_H
+
+#if defined (CONFIG_KW88F6281)
+#include <asm/arch/kw88f6281.h>
+#elif defined (CONFIG_KW88F6192)
+#include <asm/arch/kw88f6192.h>
+#else
+#error "SOC Name not defined"
+#endif /* CONFIG_KW88F6281 */
+
+#include <asm/arch/soc.h>
+#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
+#define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
+
+/*
+ * By default kwbimage.cfg from board specific folder is used
+ * If for some board, different configuration file need to be used,
+ * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
+ */
+#ifndef CONFIG_SYS_KWD_CONFIG
+#define	CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
+#endif /* CONFIG_SYS_KWD_CONFIG */
+
+/* Kirkwood has 2k of Security SRAM, use it for SP */
+#define CONFIG_SYS_INIT_SP_ADDR		0xC8012000
+
+#define CONFIG_I2C_MVTWSI_BASE0	KW_TWSI_BASE
+#define MV_UART_CONSOLE_BASE	KW_UART0_BASE
+#define MV_SATA_BASE		KW_SATA_BASE
+#define MV_SATA_PORT0_OFFSET	KW_SATA_PORT0_OFFSET
+#define MV_SATA_PORT1_OFFSET	KW_SATA_PORT1_OFFSET
+
+/*
+ * NAND configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_KIRKWOOD
+#define CONFIG_SYS_NAND_BASE		0xD8000000	/* MV_DEFADR_NANDF */
+#define NAND_ALLOW_ERASE_ALL		1
+#endif
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
+#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * USB/EHCI
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_IS_TDI
+#endif /* CONFIG_CMD_USB */
+
+/*
+ * IDE Support on SATA ports
+ */
+#ifdef CONFIG_IDE
+#define __io
+/* Needs byte-swapping for ATA data register */
+#define CONFIG_IDE_SWAP_IO
+/* Data, registers and alternate blocks are at the same offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0100)
+#define CONFIG_SYS_ATA_REG_OFFSET	(0x0100)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x0100)
+/* Each 8-bit ATA register is aligned to a 4-bytes address */
+#define CONFIG_SYS_ATA_STRIDE		4
+/* Controller supports 48-bits LBA addressing */
+#define CONFIG_LBA48
+/* CONFIG_IDE requires some #defines for ATA registers */
+#define CONFIG_SYS_IDE_MAXBUS		2
+#define CONFIG_SYS_IDE_MAXDEVICE	2
+/* ATA registers base is at SATA controller base */
+#define CONFIG_SYS_ATA_BASE_ADDR	MV_SATA_BASE
+#endif /* CONFIG_IDE */
+
+/*
+ * I2C related stuff
+ */
+#if defined(CONFIG_CMD_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
+#ifndef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
+#endif
+#define CONFIG_SYS_I2C_SLAVE		0x0
+#define CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+/* Use common timer */
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+#define CONFIG_SYS_TIMER_COUNTER	(MVEBU_TIMER_BASE + 0x14)
+#define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_TCLK
+
+#endif /* _KW_CONFIG_H */
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/include/mach/cpu.h b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/cpu.h
new file mode 100644
index 000000000..ea42182cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/cpu.h
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef _KWCPU_H
+#define _KWCPU_H
+
+#include <asm/system.h>
+
+#ifndef __ASSEMBLY__
+
+#define KWCPU_WIN_CTRL_DATA(size, target, attr, en) (en | (target << 4) \
+			| (attr << 8) | (kw_winctrl_calcsize(size) << 16))
+
+#define KWGBE_PORT_SERIAL_CONTROL1_REG(_x)	\
+		((_x ? KW_EGIGA1_BASE : KW_EGIGA0_BASE) + 0x44c)
+
+#define KW_REG_PCIE_DEVID		(KW_REG_PCIE_BASE + 0x00)
+#define KW_REG_PCIE_REVID		(KW_REG_PCIE_BASE + 0x08)
+#define KW_REG_DEVICE_ID		(KW_MPP_BASE + 0x34)
+#define KW_REG_SYSRST_CNT		(KW_MPP_BASE + 0x50)
+#define SYSRST_CNT_1SEC_VAL		(25*1000000)
+#define KW_REG_MPP_OUT_DRV_REG		(KW_MPP_BASE + 0xE0)
+
+enum memory_bank {
+	BANK0,
+	BANK1,
+	BANK2,
+	BANK3
+};
+
+enum kwcpu_winen {
+	KWCPU_WIN_DISABLE,
+	KWCPU_WIN_ENABLE
+};
+
+enum kwcpu_target {
+	KWCPU_TARGET_RESERVED,
+	KWCPU_TARGET_MEMORY,
+	KWCPU_TARGET_1RESERVED,
+	KWCPU_TARGET_SASRAM,
+	KWCPU_TARGET_PCIE
+};
+
+enum kwcpu_attrib {
+	KWCPU_ATTR_SASRAM = 0x01,
+	KWCPU_ATTR_DRAM_CS0 = 0x0e,
+	KWCPU_ATTR_DRAM_CS1 = 0x0d,
+	KWCPU_ATTR_DRAM_CS2 = 0x0b,
+	KWCPU_ATTR_DRAM_CS3 = 0x07,
+	KWCPU_ATTR_NANDFLASH = 0x2f,
+	KWCPU_ATTR_SPIFLASH = 0x1e,
+	KWCPU_ATTR_BOOTROM = 0x1d,
+	KWCPU_ATTR_PCIE_IO = 0xe0,
+	KWCPU_ATTR_PCIE_MEM = 0xe8
+};
+
+/*
+ * Default Device Address MAP BAR values
+ */
+#define KW_DEFADR_PCI_MEM	0x90000000
+#define KW_DEFADR_PCI_IO	0xC0000000
+#define KW_DEFADR_SASRAM	0xC8010000
+#define KW_DEFADR_NANDF		0xD8000000
+#define KW_DEFADR_SPIF		0xE8000000
+#define KW_DEFADR_BOOTROM	0xF8000000
+
+struct mbus_win {
+	u32 base;
+	u32 size;
+	u8 target;
+	u8 attr;
+};
+
+/*
+ * read feroceon/sheeva core extra feature register
+ * using co-proc instruction
+ */
+static inline unsigned int readfr_extra_feature_reg(void)
+{
+	unsigned int val;
+	asm volatile ("mrc p15, 1, %0, c15, c1, 0 @ readfr exfr":"=r"
+			(val)::"cc");
+	return val;
+}
+
+/*
+ * write feroceon/sheeva core extra feature register
+ * using co-proc instruction
+ */
+static inline void writefr_extra_feature_reg(unsigned int val)
+{
+	asm volatile ("mcr p15, 1, %0, c15, c1, 0 @ writefr exfr"::"r"
+			(val):"cc");
+	isb();
+}
+
+/*
+ * MBus-L to Mbus Bridge Registers
+ * Ref: Datasheet sec:A.3
+ */
+struct kwwin_registers {
+	u32 ctrl;
+	u32 base;
+	u32 remap_lo;
+	u32 remap_hi;
+};
+
+/*
+ * CPU control and status Registers
+ * Ref: Datasheet sec:A.3.2
+ */
+struct kwcpu_registers {
+	u32 config;	/*0x20100 */
+	u32 ctrl_stat;	/*0x20104 */
+	u32 rstoutn_mask; /* 0x20108 */
+	u32 sys_soft_rst; /* 0x2010C */
+	u32 ahb_mbus_cause_irq; /* 0x20110 */
+	u32 ahb_mbus_mask_irq; /* 0x20114 */
+	u32 pad1[2];
+	u32 ftdll_config; /* 0x20120 */
+	u32 pad2;
+	u32 l2_cfg;	/* 0x20128 */
+};
+
+/*
+ * GPIO Registers
+ * Ref: Datasheet sec:A.19
+ */
+struct kwgpio_registers {
+	u32 dout;
+	u32 oe;
+	u32 blink_en;
+	u32 din_pol;
+	u32 din;
+	u32 irq_cause;
+	u32 irq_mask;
+	u32 irq_level;
+};
+
+/* Needed for dynamic (board-specific) mbus configuration */
+extern struct mvebu_mbus_state mbus_state;
+
+/*
+ * functions
+ */
+unsigned int mvebu_sdram_bar(enum memory_bank bank);
+unsigned int mvebu_sdram_bs(enum memory_bank bank);
+void mvebu_sdram_size_adjust(enum memory_bank bank);
+int mvebu_mbus_probe(struct mbus_win windows[], int count);
+void mvebu_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val,
+		unsigned int gpp0_oe, unsigned int gpp1_oe);
+int kw_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15,
+		unsigned int mpp16_23, unsigned int mpp24_31,
+		unsigned int mpp32_39, unsigned int mpp40_47,
+		unsigned int mpp48_55);
+unsigned int kw_winctrl_calcsize(unsigned int sizeval);
+#endif /* __ASSEMBLY__ */
+#endif /* _KWCPU_H */
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/gpio.h
new file mode 100644
index 000000000..cae7d55d7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/gpio.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
+ */
+
+/*
+ * Based on (mostly copied from) plat-orion based Linux 2.6 kernel driver.
+ * Removed kernel level irq handling. Took some macros from kernel to
+ * allow build.
+ *
+ * Dieter Kiermaier dk-arm-linux@gmx.de
+ */
+
+#ifndef __KIRKWOOD_GPIO_H
+#define __KIRKWOOD_GPIO_H
+
+#define GPIO_MAX		50
+#define GPIO_OFF(pin)		(((pin) >> 5) ? 0x0040 : 0x0000)
+#define GPIO_OUT(pin)		(MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x00)
+#define GPIO_IO_CONF(pin)	(MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)	(MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x08)
+#define GPIO_IN_POL(pin)	(MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)	(MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)	(MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)	(MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)	(MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)
+
+/*
+ * Kirkwood-specific GPIO API
+ */
+
+void kw_gpio_set_valid(unsigned pin, int mode);
+int kw_gpio_is_valid(unsigned pin, int mode);
+int kw_gpio_direction_input(unsigned pin);
+int kw_gpio_direction_output(unsigned pin, int value);
+int kw_gpio_get_value(unsigned pin);
+void kw_gpio_set_value(unsigned pin, int value);
+void kw_gpio_set_blink(unsigned pin, int blink);
+void kw_gpio_set_unused(unsigned pin);
+
+#define GPIO_INPUT_OK		(1 << 0)
+#define GPIO_OUTPUT_OK		(1 << 1)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/include/mach/kw88f6192.h b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
new file mode 100644
index 000000000..c44eacfc1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * Header file for Feroceon CPU core 88FR131 Based KW88F6192 SOC.
+ */
+
+#ifndef _CONFIG_KW88F6192_H
+#define _CONFIG_KW88F6192_H
+
+/* SOC specific definations */
+#define KW88F6192_REGS_PHYS_BASE	0xf1000000
+#define KW_REGS_PHY_BASE		KW88F6192_REGS_PHYS_BASE
+
+/* TCLK Core Clock defination */
+#define CONFIG_SYS_TCLK	  166000000 /* 166MHz */
+
+#endif /* _CONFIG_KW88F6192_H */
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/include/mach/kw88f6281.h b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/kw88f6281.h
new file mode 100644
index 000000000..33e741420
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/kw88f6281.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * Header file for Feroceon CPU core 88FR131 Based KW88F6281 SOC.
+ */
+
+#ifndef _ASM_ARCH_KW88F6281_H
+#define _ASM_ARCH_KW88F6281_H
+
+/* SOC specific definitions */
+#define KW88F6281_REGS_PHYS_BASE	0xf1000000
+#define KW_REGS_PHY_BASE		KW88F6281_REGS_PHYS_BASE
+
+/* TCLK Core Clock definition */
+#ifndef CONFIG_SYS_TCLK
+#define CONFIG_SYS_TCLK	200000000 /* 200MHz */
+#endif
+
+#endif /* _ASM_ARCH_KW88F6281_H */
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/include/mach/mpp.h b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/mpp.h
new file mode 100644
index 000000000..4d1f58c0c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/mpp.h
@@ -0,0 +1,300 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
+ *
+ * Copyright 2009: Marvell Technology Group Ltd.
+ */
+
+#ifndef __KIRKWOOD_MPP_H
+#define __KIRKWOOD_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+	/* MPP number */		((_num) & 0xff) | \
+	/* MPP select value */		(((_sel) & 0xf) << 8) | \
+	/* may be input signal */	((!!(_in)) << 12) | \
+	/* may be output signal */	((!!(_out)) << 13) | \
+	/* available on F6180 */	((!!(_F6180)) << 14) | \
+	/* available on F6190 */	((!!(_F6190)) << 15) | \
+	/* available on F6192 */	((!!(_F6192)) << 16) | \
+	/* available on F6281 */	((!!(_F6281)) << 17))
+
+#define MPP_NUM(x)	((x) & 0xff)
+#define MPP_SEL(x)	(((x) >> 8) & 0xf)
+
+				/*   num sel  i  o  6180 6190 6192 6281 */
+
+#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0    )
+#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0    )
+
+#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0    )
+#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0    )
+#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0    )
+#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1    )
+
+#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1    )
+
+#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1    )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1    )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1    )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP8_TW_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1    )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1    )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP9_TW_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1    )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1    )
+
+#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1    )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1    )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1    )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1    )
+
+#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1    )
+
+#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1    )
+
+#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1    )
+
+#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1    )
+
+#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP20_GE1_0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP20_AUDIO_SPDIFI	MPP( 20, 0x4, 1, 0, 0,   0,   1,   1    )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1    )
+
+#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP21_GE1_1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP21_AUDIO_SPDIFO	MPP( 21, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP22_GE1_2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP22_AUDIO_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1    )
+
+#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP23_GE1_3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP23_AUDIO_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP24_TDM_SPI_CS0	DEV( 24, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP24_GE1_4		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP24_AUDIO_I2SDO	MPP( 24, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP25_GE1_5		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP25_AUDIO_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP26_GE1_6		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP26_AUDIO_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP27_GE1_7		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP27_AUDIO_I2SDI	MPP( 27, 0x4, 1, 0, 0,   0,   1,   1    )
+
+#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1    )
+#define MPP28_GE1_8		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP28_AUDIO_EXTCLK	MPP( 28, 0x4, 1, 0, 0,   0,   1,   1    )
+
+#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1    )
+#define MPP29_GE1_9		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1    )
+#define MPP30_GE1_10		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1    )
+#define MPP31_GE1_11		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP32_GE1_12		MPP( 32, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP33_GPIO		MPP( 33, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP33_GE1_13		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP34_GE1_14		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP35_GE1_15		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1    )
+
+#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP36_AUDIO_SPDIFI	MPP( 36, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP37_AUDIO_SPDIFO	MPP( 37, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP38_AUDIO_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP39_AUDIO_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP40_AUDIO_I2SDO	MPP( 40, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1    )
+#define MPP41_AUDIO_I2SLRC	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP42_AUDIO_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1    )
+#define MPP43_AUDIO_I2SDI	MPP( 43, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1    )
+#define MPP44_AUDIO_EXTCLK	MPP( 44, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1    )
+
+#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1    )
+
+#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1    )
+
+#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
+
+#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1    )
+
+#define MPP_MAX			49
+
+void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/include/mach/soc.h b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/soc.h
new file mode 100644
index 000000000..1d7f2828c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/include/mach/soc.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * Header file for the Marvell's Feroceon CPU core.
+ */
+
+#ifndef _ASM_ARCH_KIRKWOOD_H
+#define _ASM_ARCH_KIRKWOOD_H
+
+#if defined (CONFIG_FEROCEON_88FR131) || defined (CONFIG_SHEEVA_88SV131)
+
+/* SOC specific definations */
+#define INTREG_BASE			0xd0000000
+#define KW_REGISTER(x)			(KW_REGS_PHY_BASE + x)
+#define KW_OFFSET_REG			(INTREG_BASE + 0x20080)
+
+/* undocumented registers */
+#define KW_REG_UNDOC_0x1470		(KW_REGISTER(0x1470))
+#define KW_REG_UNDOC_0x1478		(KW_REGISTER(0x1478))
+
+#define MVEBU_SDRAM_BASE		(KW_REGISTER(0x1500))
+#define KW_TWSI_BASE			(KW_REGISTER(0x11000))
+#define KW_UART0_BASE			(KW_REGISTER(0x12000))
+#define KW_UART1_BASE			(KW_REGISTER(0x12100))
+#define KW_MPP_BASE			(KW_REGISTER(0x10000))
+#define MVEBU_GPIO0_BASE			(KW_REGISTER(0x10100))
+#define MVEBU_GPIO1_BASE			(KW_REGISTER(0x10140))
+#define KW_RTC_BASE			(KW_REGISTER(0x10300))
+#define KW_NANDF_BASE			(KW_REGISTER(0x10418))
+#define MVEBU_SPI_BASE			(KW_REGISTER(0x10600))
+#define MVEBU_CPU_WIN_BASE			(KW_REGISTER(0x20000))
+#define KW_CPU_REG_BASE			(KW_REGISTER(0x20100))
+#define MVEBU_TIMER_BASE			(KW_REGISTER(0x20300))
+#define KW_REG_PCIE_BASE		(KW_REGISTER(0x40000))
+#define KW_USB20_BASE			(KW_REGISTER(0x50000))
+#define KW_EGIGA0_BASE			(KW_REGISTER(0x72000))
+#define KW_EGIGA1_BASE			(KW_REGISTER(0x76000))
+#define KW_SATA_BASE			(KW_REGISTER(0x80000))
+#define KW_SDIO_BASE			(KW_REGISTER(0x90000))
+
+/* Kirkwood Sata controller has two ports */
+#define KW_SATA_PORT0_OFFSET		0x2000
+#define KW_SATA_PORT1_OFFSET		0x4000
+
+/* Kirkwood GbE controller has two ports */
+#define MAX_MVGBE_DEVS	2
+#define MVGBE0_BASE	KW_EGIGA0_BASE
+#define MVGBE1_BASE	KW_EGIGA1_BASE
+
+/* Kirkwood USB Host controller */
+#define MVUSB0_BASE			KW_USB20_BASE
+#define MVUSB0_CPU_ATTR_DRAM_CS0	KWCPU_ATTR_DRAM_CS0
+#define MVUSB0_CPU_ATTR_DRAM_CS1	KWCPU_ATTR_DRAM_CS1
+#define MVUSB0_CPU_ATTR_DRAM_CS2	KWCPU_ATTR_DRAM_CS2
+#define MVUSB0_CPU_ATTR_DRAM_CS3	KWCPU_ATTR_DRAM_CS3
+
+/* Kirkwood CPU memory windows */
+#define MVCPU_WIN_CTRL_DATA	KWCPU_WIN_CTRL_DATA
+#define MVCPU_WIN_ENABLE	KWCPU_WIN_ENABLE
+#define MVCPU_WIN_DISABLE	KWCPU_WIN_DISABLE
+
+#if defined (CONFIG_KW88F6281)
+#include <asm/arch/kw88f6281.h>
+#elif defined (CONFIG_KW88F6192)
+#include <asm/arch/kw88f6192.h>
+#else
+#error "SOC Name not defined"
+#endif /* CONFIG_KW88F6281 */
+#endif /* CONFIG_FEROCEON_88FR131 */
+#endif /* _ASM_ARCH_KIRKWOOD_H */
diff --git a/roms/u-boot/arch/arm/mach-kirkwood/mpp.c b/roms/u-boot/arch/arm/mach-kirkwood/mpp.c
new file mode 100644
index 000000000..4fdad99ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-kirkwood/mpp.c
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-kirkwood/mpp.c
+ *
+ * MPP functions for Marvell Kirkwood SoCs
+ * Referenced from Linux kernel source
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/mpp.h>
+
+static u32 kirkwood_variant(void)
+{
+	switch (readl(KW_REG_DEVICE_ID) & 0x03) {
+	case 1:
+		return MPP_F6192_MASK;
+	case 2:
+		return MPP_F6281_MASK;
+	default:
+		debug("MPP setup: unknown kirkwood variant\n");
+		return 0;
+	}
+}
+
+#define MPP_CTRL(i)	(KW_MPP_BASE + (i* 4))
+#define MPP_NR_REGS	(1 + MPP_MAX/8)
+
+void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save)
+{
+	u32 mpp_ctrl[MPP_NR_REGS];
+	unsigned int variant_mask;
+	int i;
+
+	variant_mask = kirkwood_variant();
+	if (!variant_mask)
+		return;
+
+	debug( "initial MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		mpp_ctrl[i] = readl(MPP_CTRL(i));
+		debug(" %08x", mpp_ctrl[i]);
+	}
+	debug("\n");
+
+
+	while (*mpp_list) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		unsigned int sel_save;
+		int shift;
+
+		if (num > MPP_MAX) {
+			debug("kirkwood_mpp_conf: invalid MPP "
+					"number (%u)\n", num);
+			continue;
+		}
+		if (!(*mpp_list & variant_mask)) {
+			debug("kirkwood_mpp_conf: requested MPP%u config "
+				"unavailable on this hardware\n", num);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+
+		if (mpp_save) {
+			sel_save = (mpp_ctrl[num / 8] >> shift) & 0xf;
+			*mpp_save = num | (sel_save << 8) | variant_mask;
+			mpp_save++;
+		}
+
+		mpp_ctrl[num / 8] &= ~(0xf << shift);
+		mpp_ctrl[num / 8] |= sel << shift;
+
+		mpp_list++;
+	}
+
+	debug("  final MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		writel(mpp_ctrl[i], MPP_CTRL(i));
+		debug(" %08x", mpp_ctrl[i]);
+	}
+	debug("\n");
+
+}
diff --git a/roms/u-boot/arch/arm/mach-lpc32xx/Kconfig b/roms/u-boot/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 000000000..986ad738a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,20 @@
+if ARCH_LPC32XX
+
+config SYS_SOC
+	default "lpc32xx"
+
+choice
+	prompt "NXP LPC32xx board select"
+
+config TARGET_DEVKIT3250
+	bool "Timll DevKit3250"
+
+config TARGET_WORK_92105
+	bool "Work Microwave Work_92105"
+
+endchoice
+
+source "board/timll/devkit3250/Kconfig"
+source "board/work-microwave/work_92105/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-lpc32xx/Makefile b/roms/u-boot/arch/arm/mach-lpc32xx/Makefile
new file mode 100644
index 000000000..6303570be
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-lpc32xx/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y   = cpu.o clk.o devices.o timer.o
+
+obj-$(CONFIG_SPL_BUILD) += dram.o lowlevel_init.o
diff --git a/roms/u-boot/arch/arm/mach-lpc32xx/clk.c b/roms/u-boot/arch/arm/mach-lpc32xx/clk.c
new file mode 100644
index 000000000..cb2344d79
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-lpc32xx/clk.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <div64.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/io.h>
+
+static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
+
+unsigned int get_sys_clk_rate(void)
+{
+	if (readl(&clk->sysclk_ctrl) & CLK_SYSCLK_PLL397)
+		return RTC_CLK_FREQUENCY * 397;
+	else
+		return OSC_CLK_FREQUENCY;
+}
+
+unsigned int get_hclk_pll_rate(void)
+{
+	unsigned long long fin, fref, fcco, fout;
+	u32 val, m_div, n_div, p_div;
+
+	/*
+	 * Valid frequency ranges:
+	 *     1 * 10^6 <=  Fin <=  20 * 10^6
+	 *     1 * 10^6 <= Fref <=  27 * 10^6
+	 *   156 * 10^6 <= Fcco <= 320 * 10^6
+	 */
+
+	fref = fin = get_sys_clk_rate();
+	if (fin > 20000000ULL || fin < 1000000ULL)
+		return 0;
+
+	val = readl(&clk->hclkpll_ctrl);
+	m_div = ((val & CLK_HCLK_PLL_FEEDBACK_DIV_MASK) >> 1) + 1;
+	n_div = ((val & CLK_HCLK_PLL_PREDIV_MASK) >> 9) + 1;
+	if (val & CLK_HCLK_PLL_DIRECT)
+		p_div = 0;
+	else
+		p_div = ((val & CLK_HCLK_PLL_POSTDIV_MASK) >> 11) + 1;
+	p_div = 1 << p_div;
+
+	if (val & CLK_HCLK_PLL_BYPASS) {
+		do_div(fin, p_div);
+		return fin;
+	}
+
+	do_div(fref, n_div);
+	if (fref > 27000000ULL || fref < 1000000ULL)
+		return 0;
+
+	fcco = fref * m_div;
+	fout = fcco;
+	if (val & CLK_HCLK_PLL_FEEDBACK)
+		fcco *= p_div;
+	else
+		do_div(fout, p_div);
+
+	if (fcco > 320000000ULL || fcco < 156000000ULL)
+		return 0;
+
+	return fout;
+}
+
+unsigned int get_hclk_clk_div(void)
+{
+	u32 val;
+
+	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK;
+
+	return 1 << val;
+}
+
+unsigned int get_hclk_clk_rate(void)
+{
+	return get_hclk_pll_rate() / get_hclk_clk_div();
+}
+
+unsigned int get_periph_clk_div(void)
+{
+	u32 val;
+
+	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_PERIPH_DIV_MASK;
+
+	return (val >> 2) + 1;
+}
+
+unsigned int get_periph_clk_rate(void)
+{
+	if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
+		return get_sys_clk_rate();
+
+	return get_hclk_pll_rate() / get_periph_clk_div();
+}
+
+unsigned int get_sdram_clk_rate(void)
+{
+	unsigned int src_clk;
+
+	if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
+		return get_sys_clk_rate();
+
+	src_clk = get_hclk_pll_rate();
+
+	if (readl(&clk->sdramclk_ctrl) & CLK_SDRAM_DDR_SEL) {
+		/* using DDR */
+		switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_DDRAM_MASK) {
+		case CLK_HCLK_DDRAM_HALF:
+			return src_clk/2;
+		case CLK_HCLK_DDRAM_NOMINAL:
+			return src_clk;
+		default:
+			return 0;
+		}
+	} else {
+		/* using SDR */
+		switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK) {
+		case CLK_HCLK_ARM_PLL_DIV_4:
+			return src_clk/4;
+		case CLK_HCLK_ARM_PLL_DIV_2:
+			return src_clk/2;
+		case CLK_HCLK_ARM_PLL_DIV_1:
+			return src_clk;
+		default:
+			return 0;
+		}
+	}
+}
+
+int get_serial_clock(void)
+{
+	return get_periph_clk_rate();
+}
diff --git a/roms/u-boot/arch/arm/mach-lpc32xx/cpu.c b/roms/u-boot/arch/arm/mach-lpc32xx/cpu.c
new file mode 100644
index 000000000..c2586d092
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-lpc32xx/cpu.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2015 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/wdt.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+
+static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
+static struct wdt_regs  *wdt = (struct wdt_regs *)WDT_BASE;
+
+void reset_cpu(void)
+{
+	/* Enable watchdog clock */
+	setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
+
+	/* Reset pulse length is 13005 peripheral clock frames */
+	writel(13000, &wdt->pulse);
+
+	/* Force WDOG_RESET2 and RESOUT_N signal active */
+	writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 | WDTIM_MCTRL_M_RES2,
+	       &wdt->mctrl);
+
+	while (1)
+		/* NOP */;
+}
+
+#if defined(CONFIG_ARCH_CPU_INIT)
+int arch_cpu_init(void)
+{
+	/*
+	 * It might be necessary to flush data cache, if U-Boot is loaded
+	 * from kickstart bootloader, e.g. from S1L loader
+	 */
+	flush_dcache_all();
+
+	return 0;
+}
+#else
+#error "You have to select CONFIG_ARCH_CPU_INIT"
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	printf("CPU:   NXP LPC32XX\n");
+	printf("CPU clock:        %uMHz\n", get_hclk_pll_rate() / 1000000);
+	printf("AHB bus clock:    %uMHz\n", get_hclk_clk_rate() / 1000000);
+	printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_LPC32XX_ETH
+int cpu_eth_init(struct bd_info *bis)
+{
+	lpc32xx_eth_initialize(bis);
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-lpc32xx/devices.c b/roms/u-boot/arch/arm/mach-lpc32xx/devices.c
new file mode 100644
index 000000000..e1e2e0d09
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-lpc32xx/devices.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ns16550.h>
+#include <dm/platform_data/lpc32xx_hsuart.h>
+
+#include <asm/arch/clk.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+
+static struct clk_pm_regs    *clk  = (struct clk_pm_regs *)CLK_PM_BASE;
+static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs *)UART_CTRL_BASE;
+static struct mux_regs *mux = (struct mux_regs *)MUX_BASE;
+
+void lpc32xx_uart_init(unsigned int uart_id)
+{
+	if (uart_id < 1 || uart_id > 7)
+		return;
+
+	/* Disable loopback mode, if it is set by S1L bootloader */
+	clrbits_le32(&ctrl->loop,
+		     UART_LOOPBACK(CONFIG_SYS_LPC32XX_UART));
+
+	if (uart_id < 3 || uart_id > 6)
+		return;
+
+	/* Enable UART system clock */
+	setbits_le32(&clk->uartclk_ctrl, CLK_UART(uart_id));
+
+	/* Set UART into autoclock mode */
+	clrsetbits_le32(&ctrl->clkmode,
+			UART_CLKMODE_MASK(uart_id),
+			UART_CLKMODE_AUTO(uart_id));
+
+	/* Bypass pre-divider of UART clock */
+	writel(CLK_UART_X_DIV(1) | CLK_UART_Y_DIV(1),
+	       &clk->u3clk + (uart_id - 3));
+}
+
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct ns16550_plat lpc32xx_uart[] = {
+	{ .base = UART3_BASE, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = UART4_BASE, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = UART5_BASE, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = UART6_BASE, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+};
+
+#if defined(CONFIG_LPC32XX_HSUART)
+static const struct lpc32xx_hsuart_plat lpc32xx_hsuart[] = {
+	{ HS_UART1_BASE, },
+	{ HS_UART2_BASE, },
+	{ HS_UART7_BASE, },
+};
+#endif
+
+U_BOOT_DRVINFOS(lpc32xx_uarts) = {
+#if defined(CONFIG_LPC32XX_HSUART)
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[0], },
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[1], },
+#endif
+	{ "ns16550_serial", &lpc32xx_uart[0], },
+	{ "ns16550_serial", &lpc32xx_uart[1], },
+	{ "ns16550_serial", &lpc32xx_uart[2], },
+	{ "ns16550_serial", &lpc32xx_uart[3], },
+#if defined(CONFIG_LPC32XX_HSUART)
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[2], },
+#endif
+};
+#endif
+
+void lpc32xx_dma_init(void)
+{
+	/* Enable DMA interface */
+	writel(CLK_DMA_ENABLE, &clk->dmaclk_ctrl);
+}
+
+void lpc32xx_mac_init(void)
+{
+	/* Enable MAC interface */
+	writel(CLK_MAC_REG | CLK_MAC_SLAVE | CLK_MAC_MASTER
+#if defined(CONFIG_RMII)
+		| CLK_MAC_RMII,
+#else
+		| CLK_MAC_MII,
+#endif
+		&clk->macclk_ctrl);
+}
+
+void lpc32xx_mlc_nand_init(void)
+{
+	/* Enable NAND interface */
+	writel(CLK_NAND_MLC | CLK_NAND_MLC_INT, &clk->flashclk_ctrl);
+}
+
+void lpc32xx_slc_nand_init(void)
+{
+	/* Enable SLC NAND interface */
+	writel(CLK_NAND_SLC | CLK_NAND_SLC_SELECT, &clk->flashclk_ctrl);
+}
+
+void lpc32xx_usb_init(void)
+{
+	/* Do not route the UART 5 Tx/Rx pins to the USB D+ and USB D- pins. */
+	clrbits_le32(&ctrl->ctrl, UART_CTRL_UART5_USB_MODE);
+}
+
+void lpc32xx_i2c_init(unsigned int devnum)
+{
+	/* Enable I2C interface */
+	uint32_t ctrl = readl(&clk->i2cclk_ctrl);
+	if (devnum == 1)
+		ctrl |= CLK_I2C1_ENABLE;
+	if (devnum == 2)
+		ctrl |= CLK_I2C2_ENABLE;
+	writel(ctrl, &clk->i2cclk_ctrl);
+}
+
+U_BOOT_DRVINFO(lpc32xx_gpios) = {
+	.name = "gpio_lpc32xx"
+};
+
+/* Mux for SCK0, MISO0, MOSI0. We do not use SSEL0. */
+
+#define P_MUX_SET_SSP0 0x1600
+
+void lpc32xx_ssp_init(void)
+{
+	/* Enable SSP0 interface */
+	writel(CLK_SSP0_ENABLE_CLOCK, &clk->ssp_ctrl);
+	/* Mux SSP0 pins */
+	writel(P_MUX_SET_SSP0, &mux->p_mux_set);
+}
diff --git a/roms/u-boot/arch/arm/mach-lpc32xx/dram.c b/roms/u-boot/arch/arm/mach-lpc32xx/dram.c
new file mode 100644
index 000000000..160223792
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-lpc32xx/dram.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * LPC32xx dram init
+ *
+ * (C) Copyright 2014  DENX Software Engineering GmbH
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * This is called by SPL to gain access to the SDR DRAM.
+ *
+ * This code runs from SRAM.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/wdt.h>
+#include <asm/arch/emc.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
+static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
+
+void ddr_init(struct emc_dram_settings *dram)
+{
+	uint32_t ck;
+
+	/* Enable EMC interface and choose little endian mode */
+	writel(1, &emc->ctrl);
+	writel(0, &emc->config);
+	/* Select maximum EMC Dynamic Memory Refresh Time */
+	writel(0x7FF, &emc->refresh);
+	/* Determine CLK */
+	ck = get_sdram_clk_rate();
+	/* Configure SDRAM */
+	writel(dram->cmddelay, &clk->sdramclk_ctrl);
+	writel(dram->config0, &emc->config0);
+	writel(dram->rascas0, &emc->rascas0);
+	writel(dram->rdconfig, &emc->read_config);
+	/* Set timings */
+	writel((ck / dram->trp) & 0x0000000F, &emc->t_rp);
+	writel((ck / dram->tras) & 0x0000000F, &emc->t_ras);
+	writel((ck / dram->tsrex) & 0x0000007F, &emc->t_srex);
+	writel((ck / dram->twr) & 0x0000000F, &emc->t_wr);
+	writel((ck / dram->trc) & 0x0000001F, &emc->t_rc);
+	writel((ck / dram->trfc) & 0x0000001F, &emc->t_rfc);
+	writel((ck / dram->txsr) & 0x000000FF, &emc->t_xsr);
+	writel(dram->trrd, &emc->t_rrd);
+	writel(dram->tmrd, &emc->t_mrd);
+	writel(dram->tcdlr, &emc->t_cdlr);
+	/* Dynamic refresh */
+	writel((((ck / dram->refresh) >> 4) & 0x7FF), &emc->refresh);
+	udelay(10);
+	/* Force all clocks, enable inverted ck, issue NOP command */
+	writel(0x00000193, &emc->control);
+	udelay(100);
+	/* Keep all clocks enabled, issue a PRECHARGE ALL command */
+	writel(0x00000113, &emc->control);
+	/* Fast dynamic refresh for at least a few SDRAM ck cycles */
+	writel((((128) >> 4) & 0x7FF), &emc->refresh);
+	udelay(10);
+	/* set correct dynamic refresh timing */
+	writel((((ck / dram->refresh) >> 4) & 0x7FF), &emc->refresh);
+	udelay(10);
+	/* set normal mode to CAS=3 */
+	writel(0x00000093, &emc->control);
+	readl(EMC_DYCS0_BASE | dram->mode);
+	/* set extended mode to all zeroes */
+	writel(0x00000093, &emc->control);
+	readl(EMC_DYCS0_BASE | dram->emode);
+	/* stop forcing clocks, keep inverted clock, issue normal mode */
+	writel(0x00000010, &emc->control);
+}
diff --git a/roms/u-boot/arch/arm/mach-lpc32xx/lowlevel_init.S b/roms/u-boot/arch/arm/mach-lpc32xx/lowlevel_init.S
new file mode 100644
index 000000000..d42da2bc5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-lpc32xx/lowlevel_init.S
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * WORK Microwave work_92105 board low level init
+ *
+ * (C) Copyright 2014  DENX Software Engineering GmbH
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * Low level init is called from SPL to set up the clocks.
+ * On entry, the LPC3250 is in Direct Run mode with all clocks
+ * running at 13 MHz; on exit, ARM clock is 208 MHz, HCLK is
+ * 104 MHz and PCLK is 13 MHz.
+ *
+ * This code must run from SRAM so that the clock changes do
+ * not prevent it from executing.
+ */
+
+.globl lowlevel_init
+
+lowlevel_init:
+
+	/* Set ARM, HCLK, PCLK dividers for normal mode */
+	ldr	r0, =0x0000003D
+	ldr	r1, =0x40004040
+	str	r0, [r1]
+
+	/* Start HCLK PLL for 208 MHz */
+	ldr	r0, =0x0001401E
+	ldr	r1, =0x40004058
+	str	r0, [r1]
+
+	/* wait for HCLK PLL to lock */
+1:
+	ldr	r0, [r1]
+	ands	r0, r0, #1
+	beq	1b
+
+	/* switch to normal mode */
+	ldr	r1, =0x40004044
+	ldr	r0, [r1]
+	orr	r0, #0x00000004
+	str	r0, [r1]
+
+	/* Return to U-Boot via saved link register */
+	mov	pc, lr
diff --git a/roms/u-boot/arch/arm/mach-lpc32xx/timer.c b/roms/u-boot/arch/arm/mach-lpc32xx/timer.c
new file mode 100644
index 000000000..90183e301
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-lpc32xx/timer.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/timer.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+static struct timer_regs  *timer0 = (struct timer_regs *)TIMER0_BASE;
+static struct timer_regs  *timer1 = (struct timer_regs *)TIMER1_BASE;
+static struct clk_pm_regs *clk    = (struct clk_pm_regs *)CLK_PM_BASE;
+
+static void lpc32xx_timer_clock(u32 bit, int enable)
+{
+	if (enable)
+		setbits_le32(&clk->timclk_ctrl1, bit);
+	else
+		clrbits_le32(&clk->timclk_ctrl1, bit);
+}
+
+static void lpc32xx_timer_reset(struct timer_regs *timer, u32 freq)
+{
+	writel(TIMER_TCR_COUNTER_RESET,   &timer->tcr);
+	writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
+	writel(0, &timer->tc);
+	writel(0, &timer->pr);
+
+	/* Count mode is every rising PCLK edge */
+	writel(TIMER_CTCR_MODE_TIMER, &timer->ctcr);
+
+	/* Set prescale counter value */
+	writel((get_periph_clk_rate() / freq) - 1, &timer->pr);
+
+	/* Ensure that the counter is not reset when matching TC */
+	writel(0,  &timer->mcr);
+}
+
+static void lpc32xx_timer_count(struct timer_regs *timer, int enable)
+{
+	if (enable)
+		writel(TIMER_TCR_COUNTER_ENABLE,  &timer->tcr);
+	else
+		writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
+}
+
+int timer_init(void)
+{
+	lpc32xx_timer_clock(CLK_TIMCLK_TIMER0, 1);
+	lpc32xx_timer_reset(timer0, CONFIG_SYS_HZ);
+	lpc32xx_timer_count(timer0, 1);
+
+	return 0;
+}
+
+ulong get_timer(ulong base)
+{
+	return readl(&timer0->tc) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	lpc32xx_timer_clock(CLK_TIMCLK_TIMER1, 1);
+	lpc32xx_timer_reset(timer1, CONFIG_SYS_HZ * 1000);
+	lpc32xx_timer_count(timer1, 1);
+
+	while (readl(&timer1->tc) < usec)
+		/* NOP */;
+
+	lpc32xx_timer_count(timer1, 0);
+	lpc32xx_timer_clock(CLK_TIMCLK_TIMER1, 0);
+}
+
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/mach-mediatek/Kconfig b/roms/u-boot/arch/arm/mach-mediatek/Kconfig
new file mode 100644
index 000000000..e067604d9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/Kconfig
@@ -0,0 +1,91 @@
+if ARCH_MEDIATEK
+
+config SYS_SOC
+	default "mediatek"
+
+config SYS_VENDOR
+	default "mediatek"
+
+config MT8512
+	bool "MediaTek MT8512 SoC"
+	default n
+
+choice
+	prompt "MediaTek board select"
+
+config TARGET_MT7622
+	bool "MediaTek MT7622 SoC"
+	select ARM64
+	help
+	  The MediaTek MT7622 is a ARM64-based SoC with a dual-core Cortex-A53.
+	  including UART, SPI, USB3.0, SD and MMC cards, NAND, SNFI, PWM, PCIe,
+	  Gigabit Ethernet, I2C, built-in Wi-Fi, and PCIe.
+
+config TARGET_MT7623
+	bool "MediaTek MT7623 SoC"
+	select CPU_V7A
+	help
+	  The MediaTek MT7623 is a ARM-based SoC with a quad-core Cortex-A7
+	  including NEON and GPU, Mali-450 graphics, several DDR3 options,
+	  crypto engine, built-in Wi-Fi / Bluetooth combo chip, JPEG decoder,
+	  video interfaces supporting HDMI and MIPI, and video codec support.
+	  Peripherals include Gigabit Ethernet, switch, USB3.0 and OTG, PCIe,
+	  I2S, PCM, S/PDIF, UART, SPI, I2C, IR TX/RX, and PWM.
+
+config TARGET_MT7629
+	bool "MediaTek MT7629 SoC"
+	select CPU_V7A
+	select SPL
+	help
+	  The MediaTek MT7629 is a ARM-based SoC with a dual-core Cortex-A7
+	  including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet,
+	  switch, USB3.0, PCIe, UART, SPI, I2C and PWM.
+
+config TARGET_MT8183
+	bool "MediaTek MT8183 SoC"
+	select ARM64
+	help
+	  The MediaTek MT8183 is a ARM64-based SoC with a quad-core Cortex-A73 and
+	  a quad-core Cortex-A53. It is including UART, SPI, USB3.0 dual role,
+	  SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
+	  and LPDDR4 options.
+
+config TARGET_MT8512
+        bool "MediaTek MT8512 M1 Board"
+        select ARM64
+	select MT8512
+        help
+          The MediaTek MT8512 is a ARM64-based SoC with a dual-core Cortex-A53.
+          including UART, SPI, USB2.0 and OTG, SD and MMC cards, NAND, PWM,
+          IR RX, I2C, I2S, S/PDIF, and built-in Wi-Fi / Bluetooth digital
+          and several LPDDR3 and LPDDR4 options.
+
+config TARGET_MT8516
+	bool "MediaTek MT8516 SoC"
+	select ARM64
+	help
+	  The MediaTek MT8516 is a ARM64-based SoC with a quad-core Cortex-A35.
+	  including UART, SPI, USB2.0 and OTG, SD and MMC cards, NAND, PWM,
+	  Ethernet, IR TX/RX, I2C, I2S, S/PDIF, and built-in Wi-Fi / Bluetooth combo
+	  chip and several DDR3 and DDR4 options.
+
+config TARGET_MT8518
+	bool "MediaTek MT8518 SoC"
+	select ARM64
+	help
+	  The MediaTek MT8518 is a ARM64-based SoC with a quad-core Cortex-A53.
+	  including UART, SPI, USB2.0 and OTG, SD and MMC cards, NAND, PWM,
+	  Ethernet, IR TX/RX, I2C, I2S, S/PDIF, and built-in Wi-Fi / Bluetooth combo
+	  chip and several DDR3 and DDR4 options.
+
+endchoice
+
+source "board/mediatek/mt7622/Kconfig"
+source "board/mediatek/mt7623/Kconfig"
+source "board/mediatek/mt7629/Kconfig"
+source "board/mediatek/mt8183/Kconfig"
+source "board/mediatek/mt8512/Kconfig"
+source "board/mediatek/mt8516/Kconfig"
+source "board/mediatek/mt8518/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-mediatek/Makefile b/roms/u-boot/arch/arm/mach-mediatek/Makefile
new file mode 100644
index 000000000..0f5b0c16d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y	+= cpu.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
+
+obj-$(CONFIG_MT8512) += mt8512/
+obj-$(CONFIG_TARGET_MT7622) += mt7622/
+obj-$(CONFIG_TARGET_MT7623) += mt7623/
+obj-$(CONFIG_TARGET_MT7629) += mt7629/
+obj-$(CONFIG_TARGET_MT8183) += mt8183/
+obj-$(CONFIG_TARGET_MT8516) += mt8516/
+obj-$(CONFIG_TARGET_MT8518) += mt8518/
diff --git a/roms/u-boot/arch/arm/mach-mediatek/cpu.c b/roms/u-boot/arch/arm/mach-mediatek/cpu.c
new file mode 100644
index 000000000..c329e7cc9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/cpu.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <init.h>
+#include <wdt.h>
+#include <dm/uclass-internal.h>
+
+int arch_cpu_init(void)
+{
+	icache_enable();
+
+	return 0;
+}
+
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
diff --git a/roms/u-boot/arch/arm/mach-mediatek/init.h b/roms/u-boot/arch/arm/mach-mediatek/init.h
new file mode 100644
index 000000000..1d896fbbf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/init.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#ifndef __MEDIATEK_INIT_H_
+#define __MEDIATEK_INIT_H_
+
+extern int mtk_soc_early_init(void);
+
+#endif /* __MEDIATEK_INIT_H_ */
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7622/Makefile b/roms/u-boot/arch/arm/mach-mediatek/mt7622/Makefile
new file mode 100644
index 000000000..886ab7e4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7622/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7622/init.c b/roms/u-boot/arch/arm/mach-mediatek/mt7622/init.c
new file mode 100644
index 000000000..e501907b5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7622/init.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <asm/armv8/mmu.h>
+#include <asm/cache.h>
+
+int print_cpuinfo(void)
+{
+	printf("CPU:   MediaTek MT7622\n");
+	return 0;
+}
+
+int dram_init(void)
+{
+	int ret;
+
+	ret = fdtdec_setup_memory_banksize();
+	if (ret)
+		return ret;
+	return fdtdec_setup_mem_size_base();
+
+}
+
+void reset_cpu(void)
+{
+	psci_system_reset();
+}
+
+static struct mm_region mt7622_mem_map[] = {
+	{
+		/* DDR */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
+	}, {
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		0,
+	}
+};
+struct mm_region *mem_map = mt7622_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7623/Makefile b/roms/u-boot/arch/arm/mach-mediatek/mt7623/Makefile
new file mode 100644
index 000000000..007eb4a36
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7623/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
+obj-y += lowlevel_init.o
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7623/init.c b/roms/u-boot/arch/arm/mach-mediatek/mt7623/init.c
new file mode 100644
index 000000000..5d837e059
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7623/init.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <asm/arch/misc.h>
+
+#include "preloader.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct boot_argument *preloader_param;
+
+int mtk_soc_early_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	u32 i;
+
+	if (((size_t)preloader_param >= CONFIG_SYS_SDRAM_BASE) &&
+	    ((size_t)preloader_param % sizeof(size_t) == 0) &&
+	    preloader_param->magic == BOOT_ARGUMENT_MAGIC &&
+	    preloader_param->dram_rank_num <=
+	    ARRAY_SIZE(preloader_param->dram_rank_size)) {
+		gd->ram_size = 0;
+
+		for (i = 0; i < preloader_param->dram_rank_num; i++)
+			gd->ram_size += preloader_param->dram_rank_size[i];
+	} else {
+		gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+					    SZ_2G);
+	}
+
+	return 0;
+}
+
+int print_cpuinfo(void)
+{
+	void __iomem *chipid;
+	u32 swver;
+
+	chipid = ioremap(VER_BASE, VER_SIZE);
+	swver = readl(chipid + APSW_VER);
+
+	printf("CPU:   MediaTek MT7623 E%d\n", (swver & 0xf) + 1);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7623/lowlevel_init.S b/roms/u-boot/arch/arm/mach-mediatek/mt7623/lowlevel_init.S
new file mode 100644
index 000000000..afb94767e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7623/lowlevel_init.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#include <linux/linkage.h>
+
+.extern	preloader_param
+
+ENTRY(save_boot_params)
+	ldr	r6, =preloader_param
+	str	r4, [r6]
+	b	save_boot_params_ret
+ENDPROC(save_boot_params)
+
+ENTRY(lowlevel_init)
+	/* enable SMP bit */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #0x40
+	mcr	p15, 0, r0, c1, c0, 1
+	mov	pc, lr
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7623/preloader.h b/roms/u-boot/arch/arm/mach-mediatek/mt7623/preloader.h
new file mode 100644
index 000000000..2d2c71ad4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7623/preloader.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#ifndef __PRELOADER_H_
+#define __PRELOADER_H_
+
+enum forbidden_mode {
+	F_FACTORY_MODE = 0x0001
+};
+
+union lk_hdr {
+	struct {
+		u32 magic;
+		u32 size;
+		char name[32];
+		u32 loadaddr;
+	};
+
+	u8 data[512];
+};
+
+struct sec_limit {
+	unsigned int magic_num;
+	enum forbidden_mode forbid_mode;
+};
+
+enum bootmode {
+	NORMAL_BOOT = 0,
+	META_BOOT = 1,
+	RECOVERY_BOOT = 2,
+	SW_REBOOT = 3,
+	FACTORY_BOOT = 4,
+	ADVMETA_BOOT = 5,
+	ATE_FACTORY_BOOT = 6,
+	ALARM_BOOT = 7,
+
+	KERNEL_POWER_OFF_CHARGING_BOOT = 8,
+	LOW_POWER_OFF_CHARGING_BOOT = 9,
+
+	FAST_BOOT = 99,
+	DOWNLOAD_BOOT = 100,
+	UNKNOWN_BOOT
+};
+
+enum boot_reason {
+	BR_POWER_KEY = 0,
+	BR_USB,
+	BR_RTC,
+	BR_WDT,
+	BR_WDT_BY_PASS_PWK,
+	BR_TOOL_BY_PASS_PWK,
+	BR_2SEC_REBOOT,
+	BR_UNKNOWN
+};
+
+enum meta_com_type {
+	META_UNKNOWN_COM = 0,
+	META_UART_COM,
+	META_USB_COM
+};
+
+struct da_info_t {
+	u32 addr;
+	u32 arg1;
+	u32 arg2;
+	u32 len;
+	u32 sig_len;
+};
+
+struct boot_argument {
+	u32 magic;
+	enum bootmode boot_mode;
+	u32 e_flag;
+	u32 log_port;
+	u32 log_baudrate;
+	u8 log_enable;
+	u8 part_num;
+	u8 reserved[2];
+	u32 dram_rank_num;
+	u32 dram_rank_size[4];
+	u32 boot_reason;
+	enum meta_com_type meta_com_type;
+	u32 meta_com_id;
+	u32 boot_time;
+	struct da_info_t da_info;
+	struct sec_limit sec_limit;
+	union lk_hdr *part_info;
+	u8 md_type[4];
+	u32 ddr_reserve_enable;
+	u32 ddr_reserve_success;
+	u32 chip_ver;
+	char pl_version[8];
+};
+
+#define BOOT_ARGUMENT_MAGIC	0x504c504c
+
+#endif /* __PRELOADER_H_ */
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7629/Makefile b/roms/u-boot/arch/arm/mach-mediatek/mt7629/Makefile
new file mode 100644
index 000000000..007eb4a36
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7629/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
+obj-y += lowlevel_init.o
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7629/init.c b/roms/u-boot/arch/arm/mach-mediatek/mt7629/init.c
new file mode 100644
index 000000000..0130554ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7629/init.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <log.h>
+#include <ram.h>
+#include <asm/arch/misc.h>
+#include <asm/global_data.h>
+#include <asm/sections.h>
+#include <dm/uclass.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#include <dt-bindings/clock/mt7629-clk.h>
+
+#define L2_CFG_BASE		0x10200000
+#define L2_CFG_SIZE		0x1000
+#define L2_SHARE_CFG_MP0	0x7f0
+#define L2_SHARE_MODE_OFF	BIT(8)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mtk_pll_early_init(void)
+{
+	unsigned long pll_rates[] = {
+		[CLK_APMIXED_ARMPLL] = 1250000000,
+		[CLK_APMIXED_MAINPLL] = 1120000000,
+		[CLK_APMIXED_UNIV2PLL] = 1200000000,
+		[CLK_APMIXED_ETH1PLL] = 500000000,
+		[CLK_APMIXED_ETH2PLL] = 700000000,
+		[CLK_APMIXED_SGMIPLL] = 650000000,
+	};
+	struct udevice *dev;
+	int ret, i;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(mtk_clk_apmixedsys), &dev);
+	if (ret)
+		return ret;
+
+	/* configure default rate then enable apmixedsys */
+	for (i = 0; i < ARRAY_SIZE(pll_rates); i++) {
+		struct clk clk = { .id = i, .dev = dev };
+
+		ret = clk_set_rate(&clk, pll_rates[i]);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(&clk);
+		if (ret)
+			return ret;
+	}
+
+	/* setup mcu bus */
+	ret = uclass_get_device_by_driver(UCLASS_SYSCON,
+			DM_DRIVER_GET(mtk_mcucfg), &dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+int mtk_soc_early_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	/* initialize early clocks */
+	ret = mtk_pll_early_init();
+	if (ret)
+		return ret;
+
+	ret = uclass_first_device_err(UCLASS_RAM, &dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+int mach_cpu_init(void)
+{
+	void __iomem *base;
+
+	base = ioremap(L2_CFG_BASE, L2_CFG_SIZE);
+
+	/* disable L2C shared mode */
+	writel(L2_SHARE_MODE_OFF, base + L2_SHARE_CFG_MP0);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	struct ram_info ram;
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_RAM, &dev);
+	if (ret)
+		return ret;
+
+	ret = ram_get_info(dev, &ram);
+	if (ret)
+		return ret;
+
+	debug("RAM init base=%lx, size=%x\n", ram.base, ram.size);
+
+	gd->ram_size = ram.size;
+
+	return 0;
+}
+
+int print_cpuinfo(void)
+{
+	void __iomem *chipid;
+	u32 hwcode, swver;
+
+	chipid = ioremap(VER_BASE, VER_SIZE);
+	hwcode = readl(chipid + APHW_CODE);
+	swver = readl(chipid + APSW_VER);
+
+	printf("CPU:   MediaTek MT%04x E%d\n", hwcode, (swver & 0xf) + 1);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt7629/lowlevel_init.S b/roms/u-boot/arch/arm/mach-mediatek/mt7629/lowlevel_init.S
new file mode 100644
index 000000000..0a0672cbe
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt7629/lowlevel_init.S
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/proc-armv/ptrace.h>
+
+#define WAIT_CODE_SRAM_BASE	0x0010ff00
+
+#define SLAVE_JUMP_REG		0x10202034
+#define SLAVE1_MAGIC_REG	0x10202038
+#define SLAVE1_MAGIC_NUM	0x534c4131
+
+#define GIC_CPU_BASE		0x10320000
+
+ENTRY(lowlevel_init)
+
+#ifndef CONFIG_SPL_BUILD
+	/* Return to U-Boot via saved link register */
+	mov	pc, lr
+#else
+	/*
+	 * Arch timer :
+	 * set CNTFRQ = 20Mhz, set CNTVOFF = 0
+	 */
+	movw	r0, #0x2d00
+	movt	r0, #0x131
+	mcr	p15, 0, r0, c14, c0, 0
+
+	cps	#MON_MODE
+	mrc	p15, 0, r1, c1, c1, 0	@ Get Secure Config
+	orr	r0, r1, #1
+	mcr	p15, 0, r0, c1, c1, 0	@ Set Non Secure bit
+	isb
+	mov	r0, #0
+	mcrr	p15, 4, r0, r0, c14	@ CNTVOFF = 0
+	isb
+	mcr	p15, 0, r1, c1, c1, 0	@ Set Secure bit
+	isb
+	cps	#SVC_MODE
+
+	/* enable SMP bit */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #0x40
+	mcr	p15, 0, r0, c1, c0, 1
+
+	/* if MP core, handle secondary cores */
+	mrc	p15, 0, r0, c0, c0, 5
+	ands	r1, r0, #0x40000000
+	bne	go			@ Go if UP
+	/* read slave CPU number */
+	ands	r0, r0, #0x0f
+	beq	go			@ Go if core0 on primary core tile
+	b	secondary
+
+go:
+	/* master CPU */
+	mov	pc, lr
+
+secondary:
+	/* enable GIC as cores will be waken up by IPI */
+	ldr	r2, =GIC_CPU_BASE
+	mov	r1, #0xf0
+	str	r1, [r2, #4]
+	mov	r1, #1
+	str	r1, [r2, #0]
+
+	ldr	r1, [r2]
+	orr	r1, #1
+	str	r1, [r2]
+
+	/* copy wait code into SRAM */
+	ldr	r0, =slave_cpu_wait
+	ldm	r0, {r1 - r8}		@ slave_cpu_wait has eight insns
+	ldr	r0, =WAIT_CODE_SRAM_BASE
+	stm	r0, {r1 - r8}
+
+	/* pass args to slave_cpu_wait */
+	ldr	r0, =SLAVE1_MAGIC_REG
+	ldr	r1, =SLAVE1_MAGIC_NUM
+
+	/* jump to wait code in SRAM */
+	ldr	pc, =WAIT_CODE_SRAM_BASE
+
+#endif
+ENDPROC(lowlevel_init)
+
+/* This function will be copied into SRAM */
+ENTRY(slave_cpu_wait)
+	wfi
+	ldr	r2, [r0]
+	cmp	r2, r1
+	bne	slave_cpu_wait
+	movw	r0, #:lower16:SLAVE_JUMP_REG
+	movt	r0, #:upper16:SLAVE_JUMP_REG
+	ldr	r1, [r0]
+	mov	pc, r1
+ENDPROC(slave_cpu_wait)
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8183/Makefile b/roms/u-boot/arch/arm/mach-mediatek/mt8183/Makefile
new file mode 100644
index 000000000..886ab7e4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8183/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8183/init.c b/roms/u-boot/arch/arm/mach-mediatek/mt8183/init.c
new file mode 100644
index 000000000..877f38710
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8183/init.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Copyright (C) 2021 BayLibre, SAS
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <ram.h>
+#include <asm/arch/misc.h>
+#include <asm/armv8/mmu.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <dm/uclass.h>
+#include <dt-bindings/clock/mt8516-clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	int ret;
+
+	ret = fdtdec_setup_memory_banksize();
+	if (ret)
+		return ret;
+
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = gd->ram_base;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+int mtk_pll_early_init(void)
+{
+	return 0;
+}
+
+int mtk_soc_early_init(void)
+{
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	psci_system_reset();
+}
+
+int print_cpuinfo(void)
+{
+	printf("CPU:   MediaTek MT8183\n");
+	return 0;
+}
+
+static struct mm_region mt8183_mem_map[] = {
+	{
+		/* DDR */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
+	}, {
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		0,
+	}
+};
+struct mm_region *mem_map = mt8183_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8512/Makefile b/roms/u-boot/arch/arm/mach-mediatek/mt8512/Makefile
new file mode 100644
index 000000000..007eb4a36
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8512/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
+obj-y += lowlevel_init.o
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8512/init.c b/roms/u-boot/arch/arm/mach-mediatek/mt8512/init.c
new file mode 100644
index 000000000..b7050dfc3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8512/init.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Configuration for MediaTek MT8512 SoC
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <log.h>
+#include <ram.h>
+#include <wdt.h>
+#include <asm/arch/misc.h>
+#include <asm/armv8/mmu.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/sections.h>
+#include <dm/uclass.h>
+#include <dt-bindings/clock/mt8512-clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	return fdtdec_setup_mem_size_base();
+}
+
+phys_size_t  get_effective_memsize(void)
+{
+	/* limit stack below tee reserve memory */
+	return gd->ram_size - 6 * SZ_1M;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = gd->ram_base;
+	gd->bd->bi_dram[0].size = get_effective_memsize();
+
+	return 0;
+}
+
+void reset_cpu(void)
+{
+	struct udevice *watchdog_dev = NULL;
+
+	if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev))
+		if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev))
+			psci_system_reset();
+
+	wdt_expire_now(watchdog_dev, 0);
+}
+
+int print_cpuinfo(void)
+{
+	debug("CPU:   MediaTek MT8512\n");
+	return 0;
+}
+
+static struct mm_region mt8512_mem_map[] = {
+	{
+		/* DDR */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
+	}, {
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		0,
+	}
+};
+
+struct mm_region *mem_map = mt8512_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8512/lowlevel_init.S b/roms/u-boot/arch/arm/mach-mediatek/mt8512/lowlevel_init.S
new file mode 100644
index 000000000..ad392120f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8512/lowlevel_init.S
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ */
+
+/*
+ * Switch from AArch64 EL2 to AArch32 EL2
+ * @param inputs:
+ * x0: argument, zero
+ * x1: machine nr
+ * x2: fdt address
+ * x3: input argument
+ * x4: kernel entry point
+ * @param outputs for secure firmware:
+ * x0: function id
+ * x1: kernel entry point
+ * x2: machine nr
+ * x3: fdt address
+*/
+.global armv8_el2_to_aarch32
+armv8_el2_to_aarch32:
+	mov     x3, x2
+	mov     x2, x1
+	mov     x1, x4
+	mov	x4, #0
+	/* Define in src\bsp\trustzone\atf\v1.2\ */
+	/* mt8xxx\plat\mediatek\common\sip_svc.h */
+	/* MTK_SIP_KERNEL_BOOT_AARCH64 for U-BOOT-64 to KERNEL*/
+	ldr x0, =0xC2000200
+	SMC #0
+	ret
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8516/Makefile b/roms/u-boot/arch/arm/mach-mediatek/mt8516/Makefile
new file mode 100644
index 000000000..886ab7e4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8516/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8516/init.c b/roms/u-boot/arch/arm/mach-mediatek/mt8516/init.c
new file mode 100644
index 000000000..3460dcc24
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8516/init.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <ram.h>
+#include <asm/arch/misc.h>
+#include <asm/armv8/mmu.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/sections.h>
+#include <dm/uclass.h>
+#include <dt-bindings/clock/mt8516-clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	int ret;
+
+	ret = fdtdec_setup_memory_banksize();
+	if (ret)
+		return ret;
+
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = gd->ram_base;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+int mtk_pll_early_init(void)
+{
+	unsigned long pll_rates[] = {
+		[CLK_APMIXED_ARMPLL] =   1300000000,
+		[CLK_APMIXED_MAINPLL] =  1501000000,
+		[CLK_APMIXED_UNIVPLL] =  1248000000,
+		[CLK_APMIXED_MMPLL] =     380000000,
+	};
+	struct udevice *dev;
+	int ret, i;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(mtk_clk_apmixedsys), &dev);
+	if (ret)
+		return ret;
+
+	/* configure default rate then enable apmixedsys */
+	for (i = 0; i < ARRAY_SIZE(pll_rates); i++) {
+		struct clk clk = { .id = i, .dev = dev };
+
+		ret = clk_set_rate(&clk, pll_rates[i]);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(&clk);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int mtk_soc_early_init(void)
+{
+	int ret;
+
+	/* initialize early clocks */
+	ret = mtk_pll_early_init();
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+void reset_cpu(void)
+{
+	psci_system_reset();
+}
+
+int print_cpuinfo(void)
+{
+	printf("CPU:   MediaTek MT8516\n");
+	return 0;
+}
+
+static struct mm_region mt8516_mem_map[] = {
+	{
+		/* DDR */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
+	}, {
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		0,
+	}
+};
+struct mm_region *mem_map = mt8516_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8518/Makefile b/roms/u-boot/arch/arm/mach-mediatek/mt8518/Makefile
new file mode 100644
index 000000000..007eb4a36
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8518/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
+obj-y += lowlevel_init.o
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8518/init.c b/roms/u-boot/arch/arm/mach-mediatek/mt8518/init.c
new file mode 100644
index 000000000..f7e03de36
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8518/init.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Configuration for MediaTek MT8518 SoC
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <ram.h>
+#include <asm/arch/misc.h>
+#include <asm/armv8/mmu.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/sections.h>
+#include <dm/uclass.h>
+#include <dt-bindings/clock/mt8518-clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	int ret;
+
+	ret = fdtdec_setup_memory_banksize();
+	if (ret)
+		return ret;
+
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = gd->ram_base;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+void reset_cpu(void)
+{
+	psci_system_reset();
+}
+
+int print_cpuinfo(void)
+{
+	printf("CPU:   MediaTek MT8518\n");
+	return 0;
+}
+
+static struct mm_region mt8518_mem_map[] = {
+	{
+		/* DDR */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
+	}, {
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		0,
+	}
+};
+
+struct mm_region *mem_map = mt8518_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-mediatek/mt8518/lowlevel_init.S b/roms/u-boot/arch/arm/mach-mediatek/mt8518/lowlevel_init.S
new file mode 100644
index 000000000..ad392120f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/mt8518/lowlevel_init.S
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ */
+
+/*
+ * Switch from AArch64 EL2 to AArch32 EL2
+ * @param inputs:
+ * x0: argument, zero
+ * x1: machine nr
+ * x2: fdt address
+ * x3: input argument
+ * x4: kernel entry point
+ * @param outputs for secure firmware:
+ * x0: function id
+ * x1: kernel entry point
+ * x2: machine nr
+ * x3: fdt address
+*/
+.global armv8_el2_to_aarch32
+armv8_el2_to_aarch32:
+	mov     x3, x2
+	mov     x2, x1
+	mov     x1, x4
+	mov	x4, #0
+	/* Define in src\bsp\trustzone\atf\v1.2\ */
+	/* mt8xxx\plat\mediatek\common\sip_svc.h */
+	/* MTK_SIP_KERNEL_BOOT_AARCH64 for U-BOOT-64 to KERNEL*/
+	ldr x0, =0xC2000200
+	SMC #0
+	ret
diff --git a/roms/u-boot/arch/arm/mach-mediatek/spl.c b/roms/u-boot/arch/arm/mach-mediatek/spl.c
new file mode 100644
index 000000000..927175c5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mediatek/spl.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <hang.h>
+#include <init.h>
+#include <spl.h>
+
+#include "init.h"
+
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+	ret = spl_early_init();
+	if (ret)
+		hang();
+
+	/* enable console uart printing */
+	preloader_console_init();
+
+	/* soc early initialization */
+	ret = mtk_soc_early_init();
+	if (ret)
+		hang();
+}
+
+u32 spl_boot_device(void)
+{
+#if defined(CONFIG_SPL_SPI_SUPPORT)
+	return BOOT_DEVICE_SPI;
+#elif defined(CONFIG_SPL_MMC_SUPPORT)
+	return BOOT_DEVICE_MMC1;
+#elif defined(CONFIG_SPL_NAND_SUPPORT)
+	return BOOT_DEVICE_NAND;
+#elif defined(CONFIG_SPL_NOR_SUPPORT)
+	return BOOT_DEVICE_NOR;
+#else
+	return BOOT_DEVICE_NONE;
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-meson/Kconfig b/roms/u-boot/arch/arm/mach-meson/Kconfig
new file mode 100644
index 000000000..6cba2c40d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-meson/Kconfig
@@ -0,0 +1,91 @@
+if ARCH_MESON
+
+config MESON64_COMMON
+	bool
+	select ARM64
+	select CLK
+	select DM
+	select DM_SERIAL
+	select SYSCON
+	select REGMAP
+	select PWRSEQ
+	select MMC_PWRSEQ
+	select BOARD_LATE_INIT
+	imply CMD_DM
+
+config MESON_GX
+	bool
+	select MESON64_COMMON
+
+choice
+	prompt "Platform select"
+	default MESON_GXBB
+
+config MESON_GXBB
+	bool "GXBB"
+	select MESON_GX
+	help
+	  Select this if your SoC is an S905
+
+config MESON_GXL
+	bool "GXL"
+	select MESON_GX
+	help
+	  Select this if your SoC is an S905X/D or S805X
+
+config MESON_GXM
+	bool "GXM"
+	select MESON_GX
+	help
+	  Select this if your SoC is an S912
+
+config MESON_AXG
+	bool "AXG"
+	select MESON64_COMMON
+	help
+	  Select this if your SoC is an A113X/D
+
+config MESON_G12A
+	bool "G12A"
+	select MESON64_COMMON
+	help
+	  Select this if your SoC is an S905X/D2
+
+endchoice
+
+config SYS_SOC
+	default "meson"
+
+config SYS_MALLOC_F_LEN
+	default 0x1000
+
+config SYS_VENDOR
+	string "Vendor name"
+	default "amlogic"
+	help
+	  This option contains information about board name.
+	  Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will
+	  be used.
+
+config SYS_BOARD
+	string "Board name"
+	default "p200" if MESON_GXBB
+	default "p212" if MESON_GXL
+	default "q200" if MESON_GXM
+	default "s400" if MESON_AXG
+	default "u200" if MESON_G12A
+	default ""
+	help
+	  This option contains information about board name.
+	  Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will
+	  be used.
+
+config SYS_CONFIG_NAME
+	string "Board configuration name"
+	default "meson64"
+	help
+	  This option contains information about board configuration name.
+	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+	  will be used for board configuration.
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-meson/Makefile b/roms/u-boot/arch/arm/mach-meson/Makefile
new file mode 100644
index 000000000..a9e4046f8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-meson/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2016 Beniamino Galvani <b.galvani@gmail.com>
+
+obj-y += board-common.o sm.o board-info.o
+obj-$(CONFIG_MESON_GX) += board-gx.o
+obj-$(CONFIG_MESON_AXG) += board-axg.o
+obj-$(CONFIG_MESON_G12A) += board-g12a.o
diff --git a/roms/u-boot/arch/arm/mach-meson/board-axg.c b/roms/u-boot/arch/arm/mach-meson/board-axg.c
new file mode 100644
index 000000000..71ac65c63
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-meson/board-axg.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ * (C) Copyright 2018 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <net.h>
+#include <asm/arch/boot.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/axg.h>
+#include <asm/arch/mem.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/armv8/mmu.h>
+#include <linux/sizes.h>
+#include <usb.h>
+#include <linux/usb/otg.h>
+#include <asm/arch/usb-gx.h>
+#include <usb/dwc2_udc.h>
+#include <clk.h>
+#include <phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int meson_get_boot_device(void)
+{
+	return readl(AXG_AO_SEC_GP_CFG0) & AXG_AO_BOOT_DEVICE;
+}
+
+/* Configure the reserved memory zones exported by the secure registers
+ * into EFI and DTB reserved memory entries.
+ */
+void meson_init_reserved_memory(void *fdt)
+{
+	u64 bl31_size, bl31_start;
+	u64 bl32_size, bl32_start;
+	u32 reg;
+
+	/*
+	 * Get ARM Trusted Firmware reserved memory zones in :
+	 * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
+	 * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
+	 * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
+	 */
+	reg = readl(AXG_AO_SEC_GP_CFG3);
+
+	bl31_size = ((reg & AXG_AO_BL31_RSVMEM_SIZE_MASK)
+			>> AXG_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
+	bl32_size = (reg & AXG_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
+
+	bl31_start = readl(AXG_AO_SEC_GP_CFG5);
+	bl32_start = readl(AXG_AO_SEC_GP_CFG4);
+
+	/* Add BL31 reserved zone */
+	if (bl31_start && bl31_size)
+		meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
+
+	/* Add BL32 reserved zone */
+	if (bl32_start && bl32_size)
+		meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
+}
+
+phys_size_t get_effective_memsize(void)
+{
+	/* Size is reported in MiB, convert it in bytes */
+	return ((readl(AXG_AO_SEC_GP_CFG0) & AXG_AO_MEM_SIZE_MASK)
+			>> AXG_AO_MEM_SIZE_SHIFT) * SZ_1M;
+}
+
+static struct mm_region axg_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xf0000000UL,
+		.phys = 0xf0000000UL,
+		.size = 0x10000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = axg_mem_map;
+
+#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
+	CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
+static struct dwc2_plat_otg_data meson_gx_dwc2_data;
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	struct fdtdec_phandle_args args;
+	const void *blob = gd->fdt_blob;
+	int node, dwc2_node;
+	struct udevice *dev, *clk_dev;
+	struct clk clk;
+	int ret;
+
+	/* find the usb glue node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					     "amlogic,meson-gxl-usb-ctrl");
+	if (node < 0) {
+		debug("Not found usb-control node\n");
+		return -ENODEV;
+	}
+
+	if (!fdtdec_get_is_enabled(blob, node)) {
+		debug("usb is disabled in the device tree\n");
+		return -ENODEV;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
+	if (ret) {
+		debug("Not found usb-control device\n");
+		return ret;
+	}
+
+	/* find the dwc2 node */
+	dwc2_node = fdt_node_offset_by_compatible(blob, node,
+						  "amlogic,meson-g12a-usb");
+	if (dwc2_node < 0) {
+		debug("Not found dwc2 node\n");
+		return -ENODEV;
+	}
+
+	if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
+		debug("dwc2 is disabled in the device tree\n");
+		return -ENODEV;
+	}
+
+	meson_gx_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg");
+	if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
+		debug("usbotg: can't get base address\n");
+		return -ENODATA;
+	}
+
+	/* Enable clock */
+	ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks",
+					     "#clock-cells", 0, 0, &args);
+	if (ret) {
+		debug("usbotg has no clocks defined in the device tree\n");
+		return ret;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev);
+	if (ret)
+		return ret;
+
+	if (args.args_count != 1) {
+		debug("Can't find clock ID in the device tree\n");
+		return -ENODATA;
+	}
+
+	clk.dev = clk_dev;
+	clk.id = args.args[0];
+
+	ret = clk_enable(&clk);
+	if (ret) {
+		debug("Failed to enable usbotg clock\n");
+		return ret;
+	}
+
+	meson_gx_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+						     "g-rx-fifo-size", 0);
+	meson_gx_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+							"g-np-tx-fifo-size", 0);
+	meson_gx_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+						     "g-tx-fifo-size", 0);
+
+	/* Switch to peripheral mode */
+	ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_PERIPHERAL);
+	if (ret)
+		return ret;
+
+	return dwc2_udc_probe(&meson_gx_dwc2_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	const void *blob = gd->fdt_blob;
+	struct udevice *dev;
+	int node;
+	int ret;
+
+	/* find the usb glue node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					     "amlogic,meson-gxl-usb-ctrl");
+	if (node < 0) {
+		debug("Not found usb-control node\n");
+		return -ENODEV;
+	}
+
+	if (!fdtdec_get_is_enabled(blob, node))
+		return -ENODEV;
+
+	ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
+	if (ret)
+		return ret;
+
+	/* Switch to OTG mode */
+	ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_HOST);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-meson/board-common.c b/roms/u-boot/arch/arm/mach-meson/board-common.c
new file mode 100644
index 000000000..1690b6b1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-meson/board-common.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <fastboot.h>
+#include <init.h>
+#include <net.h>
+#include <asm/arch/boot.h>
+#include <env.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/ptrace.h>
+#include <linux/libfdt.h>
+#include <linux/err.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sm.h>
+#include <asm/armv8/mmu.h>
+#include <asm/unaligned.h>
+#include <efi_loader.h>
+#include <u-boot/crc.h>
+
+#if CONFIG_IS_ENABLED(FASTBOOT)
+#include <asm/psci.h>
+#include <fastboot.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	const fdt64_t *val;
+	int offset;
+	int len;
+
+	offset = fdt_path_offset(gd->fdt_blob, "/memory");
+	if (offset < 0)
+		return -EINVAL;
+
+	val = fdt_getprop(gd->fdt_blob, offset, "reg", &len);
+	if (len < sizeof(*val) * 2)
+		return -EINVAL;
+
+	/* Use unaligned access since cache is still disabled */
+	gd->ram_size = get_unaligned_be64(&val[1]);
+
+	return 0;
+}
+
+__weak int meson_ft_board_setup(void *blob, struct bd_info *bd)
+{
+	return 0;
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	meson_init_reserved_memory(blob);
+
+	return meson_ft_board_setup(blob, bd);
+}
+
+void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
+{
+	int ret;
+
+	ret = fdt_add_mem_rsv(fdt, start, size);
+	if (ret)
+		printf("Could not reserve zone @ 0x%llx\n", start);
+
+	if (IS_ENABLED(CONFIG_EFI_LOADER))
+		efi_add_memory_map(start, size, EFI_RESERVED_MEMORY_TYPE);
+}
+
+int meson_generate_serial_ethaddr(void)
+{
+	u8 mac_addr[ARP_HLEN];
+	char serial[SM_SERIAL_SIZE];
+	u32 sid;
+	u16 sid16;
+
+	if (!meson_sm_get_serial(serial, SM_SERIAL_SIZE)) {
+		sid = crc32(0, (unsigned char *)serial, SM_SERIAL_SIZE);
+		sid16 = crc16_ccitt(0, (unsigned char *)serial,	SM_SERIAL_SIZE);
+
+		/* Ensure the NIC specific bytes of the mac are not all 0 */
+		if ((sid & 0xffffff) == 0)
+			sid |= 0x800000;
+
+		/* Non OUI / registered MAC address */
+		mac_addr[0] = ((sid16 >> 8) & 0xfc) | 0x02;
+		mac_addr[1] = (sid16 >>  0) & 0xff;
+		mac_addr[2] = (sid >> 24) & 0xff;
+		mac_addr[3] = (sid >> 16) & 0xff;
+		mac_addr[4] = (sid >>  8) & 0xff;
+		mac_addr[5] = (sid >>  0) & 0xff;
+
+		eth_env_set_enetaddr("ethaddr", mac_addr);
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+
+static void meson_set_boot_source(void)
+{
+	const char *source;
+
+	switch (meson_get_boot_device()) {
+	case BOOT_DEVICE_EMMC:
+		source = "emmc";
+		break;
+
+	case BOOT_DEVICE_NAND:
+		source = "nand";
+		break;
+
+	case BOOT_DEVICE_SPI:
+		source = "spi";
+		break;
+
+	case BOOT_DEVICE_SD:
+		source = "sd";
+		break;
+
+	case BOOT_DEVICE_USB:
+		source = "usb";
+		break;
+
+	default:
+		source = "unknown";
+	}
+
+	env_set("boot_source", source);
+}
+
+__weak int meson_board_late_init(void)
+{
+	return 0;
+}
+
+int board_late_init(void)
+{
+	meson_set_boot_source();
+
+	return meson_board_late_init();
+}
+
+#if CONFIG_IS_ENABLED(FASTBOOT)
+static unsigned int reboot_reason = REBOOT_REASON_NORMAL;
+
+int fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
+{
+	if (reason != FASTBOOT_REBOOT_REASON_BOOTLOADER)
+		return -ENOTSUPP;
+
+	reboot_reason = REBOOT_REASON_BOOTLOADER;
+
+	printf("Using reboot reason: 0x%x\n", reboot_reason);
+
+	return 0;
+}
+
+void reset_cpu(void)
+{
+	struct pt_regs regs;
+
+	regs.regs[0] = ARM_PSCI_0_2_FN_SYSTEM_RESET;
+	regs.regs[1] = reboot_reason;
+
+	printf("Rebooting with reason: 0x%lx\n", regs.regs[1]);
+
+	smc_call(&regs);
+
+	while (1)
+		;
+}
+#else
+void reset_cpu(void)
+{
+	psci_system_reset();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-meson/board-g12a.c b/roms/u-boot/arch/arm/mach-meson/board-g12a.c
new file mode 100644
index 000000000..2e59eee8f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-meson/board-g12a.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ * (C) Copyright 2018 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <log.h>
+#include <net.h>
+#include <asm/arch/boot.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/g12a.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/meson-vpu.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/armv8/mmu.h>
+#include <linux/sizes.h>
+#include <usb.h>
+#include <linux/usb/otg.h>
+#include <asm/arch/usb.h>
+#include <usb/dwc2_udc.h>
+#include <phy.h>
+#include <clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int meson_get_boot_device(void)
+{
+	return readl(G12A_AO_SEC_GP_CFG0) & G12A_AO_BOOT_DEVICE;
+}
+
+/* Configure the reserved memory zones exported by the secure registers
+ * into EFI and DTB reserved memory entries.
+ */
+void meson_init_reserved_memory(void *fdt)
+{
+	u64 bl31_size, bl31_start;
+	u64 bl32_size, bl32_start;
+	u32 reg;
+
+	/*
+	 * Get ARM Trusted Firmware reserved memory zones in :
+	 * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
+	 * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
+	 * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
+	 */
+	reg = readl(G12A_AO_SEC_GP_CFG3);
+
+	bl31_size = ((reg & G12A_AO_BL31_RSVMEM_SIZE_MASK)
+			>> G12A_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
+	bl32_size = (reg & G12A_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
+
+	bl31_start = readl(G12A_AO_SEC_GP_CFG5);
+	bl32_start = readl(G12A_AO_SEC_GP_CFG4);
+
+	/* Add BL31 reserved zone */
+	if (bl31_start && bl31_size)
+		meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
+
+	/* Add BL32 reserved zone */
+	if (bl32_start && bl32_size)
+		meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
+
+#if defined(CONFIG_VIDEO_MESON)
+	meson_vpu_rsv_fb(fdt);
+#endif
+}
+
+phys_size_t get_effective_memsize(void)
+{
+	/* Size is reported in MiB, convert it in bytes */
+	return min(((readl(G12A_AO_SEC_GP_CFG0) & G12A_AO_MEM_SIZE_MASK)
+			>> G12A_AO_MEM_SIZE_SHIFT) * SZ_1M, 0xf5000000);
+}
+
+static struct mm_region g12a_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0xf5000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xf5000000UL,
+		.phys = 0xf5000000UL,
+		.size = 0x0b000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = g12a_mem_map;
+
+#if CONFIG_IS_ENABLED(USB_DWC3_MESON_G12A) && \
+	CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
+static struct dwc2_plat_otg_data meson_g12a_dwc2_data;
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	struct fdtdec_phandle_args args;
+	const void *blob = gd->fdt_blob;
+	int node, dwc2_node;
+	struct udevice *dev, *clk_dev;
+	struct clk clk;
+	int ret;
+
+	/* find the usb glue node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					     "amlogic,meson-g12a-usb-ctrl");
+	if (node < 0) {
+		debug("Not found usb-control node\n");
+		return -ENODEV;
+	}
+
+	if (!fdtdec_get_is_enabled(blob, node)) {
+		debug("usb is disabled in the device tree\n");
+		return -ENODEV;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
+	if (ret) {
+		debug("Not found usb-control device\n");
+		return ret;
+	}
+
+	/* find the dwc2 node */
+	dwc2_node = fdt_node_offset_by_compatible(blob, node,
+						  "amlogic,meson-g12a-usb");
+	if (dwc2_node < 0) {
+		debug("Not found dwc2 node\n");
+		return -ENODEV;
+	}
+
+	if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
+		debug("dwc2 is disabled in the device tree\n");
+		return -ENODEV;
+	}
+
+	meson_g12a_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg");
+	if (meson_g12a_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
+		debug("usbotg: can't get base address\n");
+		return -ENODATA;
+	}
+
+	/* Enable clock */
+	ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks",
+					     "#clock-cells", 0, 0, &args);
+	if (ret) {
+		debug("usbotg has no clocks defined in the device tree\n");
+		return ret;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev);
+	if (ret)
+		return ret;
+
+	if (args.args_count != 1) {
+		debug("Can't find clock ID in the device tree\n");
+		return -ENODATA;
+	}
+
+	clk.dev = clk_dev;
+	clk.id = args.args[0];
+
+	ret = clk_enable(&clk);
+	if (ret) {
+		debug("Failed to enable usbotg clock\n");
+		return ret;
+	}
+
+	meson_g12a_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+						     "g-rx-fifo-size", 0);
+	meson_g12a_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+							"g-np-tx-fifo-size", 0);
+	meson_g12a_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+						     "g-tx-fifo-size", 0);
+
+	/* Switch to peripheral mode */
+	ret = dwc3_meson_g12a_force_mode(dev, USB_DR_MODE_PERIPHERAL);
+	if (ret)
+		return ret;
+
+	return dwc2_udc_probe(&meson_g12a_dwc2_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	const void *blob = gd->fdt_blob;
+	struct udevice *dev;
+	int node;
+	int ret;
+
+	/* find the usb glue node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					     "amlogic,meson-g12a-usb-ctrl");
+	if (node < 0)
+		return -ENODEV;
+
+	if (!fdtdec_get_is_enabled(blob, node))
+		return -ENODEV;
+
+	ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
+	if (ret)
+		return ret;
+
+	/* Switch to OTG mode */
+	ret = dwc3_meson_g12a_force_mode(dev, USB_DR_MODE_HOST);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-meson/board-gx.c b/roms/u-boot/arch/arm/mach-meson/board-gx.c
new file mode 100644
index 000000000..01fafd81c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-meson/board-gx.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ * (C) Copyright 2018 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <net.h>
+#include <asm/arch/boot.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/gx.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/meson-vpu.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/armv8/mmu.h>
+#include <linux/sizes.h>
+#include <usb.h>
+#include <linux/usb/otg.h>
+#include <asm/arch/usb-gx.h>
+#include <usb/dwc2_udc.h>
+#include <clk.h>
+#include <phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int meson_get_boot_device(void)
+{
+	return readl(GX_AO_SEC_GP_CFG0) & GX_AO_BOOT_DEVICE;
+}
+
+/* Configure the reserved memory zones exported by the secure registers
+ * into EFI and DTB reserved memory entries.
+ */
+void meson_init_reserved_memory(void *fdt)
+{
+	u64 bl31_size, bl31_start;
+	u64 bl32_size, bl32_start;
+	u32 reg;
+
+	/*
+	 * Get ARM Trusted Firmware reserved memory zones in :
+	 * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
+	 * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
+	 * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
+	 */
+	reg = readl(GX_AO_SEC_GP_CFG3);
+
+	bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
+			>> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
+	bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
+
+	bl31_start = readl(GX_AO_SEC_GP_CFG5);
+	bl32_start = readl(GX_AO_SEC_GP_CFG4);
+
+	/*
+	 * Early Meson GX Firmware revisions did not provide the reserved
+	 * memory zones in the registers, keep fixed memory zone handling.
+	 */
+	if (IS_ENABLED(CONFIG_MESON_GX) &&
+	    !reg && !bl31_start && !bl32_start) {
+		bl31_start = 0x10000000;
+		bl31_size = 0x200000;
+	}
+
+	/* Add first 16MiB reserved zone */
+	meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
+
+	/* Add BL31 reserved zone */
+	if (bl31_start && bl31_size)
+		meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
+
+	/* Add BL32 reserved zone */
+	if (bl32_start && bl32_size)
+		meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
+
+#if defined(CONFIG_VIDEO_MESON)
+	meson_vpu_rsv_fb(fdt);
+#endif
+}
+
+phys_size_t get_effective_memsize(void)
+{
+	/* Size is reported in MiB, convert it in bytes */
+	return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
+			>> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
+}
+
+static struct mm_region gx_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0xc0000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xc0000000UL,
+		.phys = 0xc0000000UL,
+		.size = 0x30000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = gx_mem_map;
+
+#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
+	CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
+static struct dwc2_plat_otg_data meson_gx_dwc2_data;
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	struct fdtdec_phandle_args args;
+	const void *blob = gd->fdt_blob;
+	int node, dwc2_node;
+	struct udevice *dev, *clk_dev;
+	struct clk clk;
+	int ret;
+
+	/* find the usb glue node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					     "amlogic,meson-gxl-usb-ctrl");
+	if (node < 0) {
+		node = fdt_node_offset_by_compatible(blob, -1,
+					"amlogic,meson-gxm-usb-ctrl");
+		if (node < 0) {
+			debug("Not found usb-control node\n");
+			return -ENODEV;
+		}
+	}
+
+	if (!fdtdec_get_is_enabled(blob, node)) {
+		debug("usb is disabled in the device tree\n");
+		return -ENODEV;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
+	if (ret) {
+		debug("Not found usb-control device\n");
+		return ret;
+	}
+
+	/* find the dwc2 node */
+	dwc2_node = fdt_node_offset_by_compatible(blob, node,
+						  "amlogic,meson-g12a-usb");
+	if (dwc2_node < 0) {
+		debug("Not found dwc2 node\n");
+		return -ENODEV;
+	}
+
+	if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
+		debug("dwc2 is disabled in the device tree\n");
+		return -ENODEV;
+	}
+
+	meson_gx_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg");
+	if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
+		debug("usbotg: can't get base address\n");
+		return -ENODATA;
+	}
+
+	/* Enable clock */
+	ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks",
+					     "#clock-cells", 0, 0, &args);
+	if (ret) {
+		debug("usbotg has no clocks defined in the device tree\n");
+		return ret;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev);
+	if (ret)
+		return ret;
+
+	if (args.args_count != 1) {
+		debug("Can't find clock ID in the device tree\n");
+		return -ENODATA;
+	}
+
+	clk.dev = clk_dev;
+	clk.id = args.args[0];
+
+	ret = clk_enable(&clk);
+	if (ret) {
+		debug("Failed to enable usbotg clock\n");
+		return ret;
+	}
+
+	meson_gx_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+						     "g-rx-fifo-size", 0);
+	meson_gx_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+							"g-np-tx-fifo-size", 0);
+	meson_gx_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
+						     "g-tx-fifo-size", 0);
+
+	/* Switch to peripheral mode */
+	ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_PERIPHERAL);
+	if (ret)
+		return ret;
+
+	return dwc2_udc_probe(&meson_gx_dwc2_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	const void *blob = gd->fdt_blob;
+	struct udevice *dev;
+	int node;
+	int ret;
+
+	/* find the usb glue node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					     "amlogic,meson-gxl-usb-ctrl");
+	if (node < 0) {
+		node = fdt_node_offset_by_compatible(blob, -1,
+					"amlogic,meson-gxm-usb-ctrl");
+		if (node < 0) {
+			debug("Not found usb-control node\n");
+			return -ENODEV;
+		}
+	}
+
+	if (!fdtdec_get_is_enabled(blob, node))
+		return -ENODEV;
+
+	ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
+	if (ret)
+		return ret;
+
+	/* Switch to OTG mode */
+	ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_HOST);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-meson/board-info.c b/roms/u-boot/arch/arm/mach-meson/board-info.c
new file mode 100644
index 000000000..d16d3f194
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-meson/board-info.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Julien Masson <jmasson@baylibre.com>
+ * (C) Copyright 2019 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <linux/bitfield.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+
+#define AO_SEC_SD_CFG8		0xe0
+#define AO_SEC_SOCINFO_OFFSET	AO_SEC_SD_CFG8
+
+#define SOCINFO_MAJOR	GENMASK(31, 24)
+#define SOCINFO_PACK	GENMASK(23, 16)
+#define SOCINFO_MINOR	GENMASK(15, 8)
+#define SOCINFO_MISC	GENMASK(7, 0)
+
+static const struct meson_gx_soc_id {
+	const char *name;
+	unsigned int id;
+} soc_ids[] = {
+	{ "GXBB",   0x1f },
+	{ "GXTVBB", 0x20 },
+	{ "GXL",    0x21 },
+	{ "GXM",    0x22 },
+	{ "TXL",    0x23 },
+	{ "TXLX",   0x24 },
+	{ "AXG",    0x25 },
+	{ "GXLX",   0x26 },
+	{ "TXHD",   0x27 },
+	{ "G12A",   0x28 },
+	{ "G12B",   0x29 },
+	{ "SM1",    0x2b },
+	{ "A1",	    0x2c },
+};
+
+static const struct meson_gx_package_id {
+	const char *name;
+	unsigned int major_id;
+	unsigned int pack_id;
+	unsigned int pack_mask;
+} soc_packages[] = {
+	{ "S905",   0x1f, 0,    0x20 }, /* pack_id != 0x20 */
+	{ "S905H",  0x1f, 0x3,  0xf },  /* pack_id & 0xf == 0x3 */
+	{ "S905M",  0x1f, 0x20, 0xf0 }, /* pack_id == 0x20 */
+	{ "S905D",  0x21, 0,    0xf0 },
+	{ "S905X",  0x21, 0x80, 0xf0 },
+	{ "S905W",  0x21, 0xa0, 0xf0 },
+	{ "S905L",  0x21, 0xc0, 0xf0 },
+	{ "S905M2", 0x21, 0xe0, 0xf0 },
+	{ "S805X",  0x21, 0x30, 0xf0 },
+	{ "S805Y",  0x21, 0xb0, 0xf0 },
+	{ "S912",   0x22, 0,    0x0 },  /* Only S912 is known for GXM */
+	{ "962X",   0x24, 0x10, 0xf0 },
+	{ "962E",   0x24, 0x20, 0xf0 },
+	{ "A113X",  0x25, 0x37, 0xff },
+	{ "A113D",  0x25, 0x22, 0xff },
+	{ "S905D2", 0x28, 0x10, 0xf0 },
+	{ "S905X2", 0x28, 0x40, 0xf0 },
+	{ "A311D",  0x29, 0x10, 0xf0 },
+	{ "S922X",  0x29, 0x40, 0xf0 },
+	{ "S905D3", 0x2b, 0x4, 0xf5 },
+	{ "S905X3", 0x2b, 0x5, 0xf5 },
+	{ "S905X3", 0x2b, 0x10, 0x3f },
+	{ "S905D3", 0x2b, 0x30, 0x3f },
+	{ "A113L", 0x2c, 0x0, 0xf8 },
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline unsigned int socinfo_to_major(u32 socinfo)
+{
+	return FIELD_GET(SOCINFO_MAJOR, socinfo);
+}
+
+static inline unsigned int socinfo_to_minor(u32 socinfo)
+{
+	return FIELD_GET(SOCINFO_MINOR, socinfo);
+}
+
+static inline unsigned int socinfo_to_pack(u32 socinfo)
+{
+	return FIELD_GET(SOCINFO_PACK, socinfo);
+}
+
+static inline unsigned int socinfo_to_misc(u32 socinfo)
+{
+	return FIELD_GET(SOCINFO_MISC, socinfo);
+}
+
+static const char *socinfo_to_package_id(u32 socinfo)
+{
+	unsigned int pack = socinfo_to_pack(socinfo);
+	unsigned int major = socinfo_to_major(socinfo);
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(soc_packages) ; ++i) {
+		if (soc_packages[i].major_id == major &&
+		    soc_packages[i].pack_id ==
+		    (pack & soc_packages[i].pack_mask))
+			return soc_packages[i].name;
+	}
+
+	return "Unknown";
+}
+
+static const char *socinfo_to_soc_id(u32 socinfo)
+{
+	unsigned int id = socinfo_to_major(socinfo);
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(soc_ids) ; ++i) {
+		if (soc_ids[i].id == id)
+			return soc_ids[i].name;
+	}
+
+	return "Unknown";
+}
+
+static void print_board_model(void)
+{
+	const char *model;
+	model = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+	printf("Model: %s\n", model ? model : "Unknown");
+}
+
+static unsigned int get_socinfo(void)
+{
+	struct regmap *regmap;
+	int nodeoffset, ret;
+	ofnode node;
+	unsigned int socinfo;
+
+	/* find the offset of compatible node */
+	nodeoffset = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+						   "amlogic,meson-gx-ao-secure");
+	if (nodeoffset < 0)
+		return 0;
+
+	/* check if chip-id is available */
+	if (!fdt_getprop(gd->fdt_blob, nodeoffset, "amlogic,has-chip-id", NULL))
+		return 0;
+
+	/* get regmap from the syscon node */
+	node = offset_to_ofnode(nodeoffset);
+	regmap = syscon_node_to_regmap(node);
+	if (IS_ERR(regmap)) {
+		printf("%s: failed to get regmap\n", __func__);
+		return 0;
+	}
+
+	/* read soc info */
+	ret = regmap_read(regmap, AO_SEC_SOCINFO_OFFSET, &socinfo);
+	if (ret && !socinfo) {
+		printf("%s: invalid chipid value\n", __func__);
+		return 0;
+	}
+
+	return socinfo;
+}
+
+int show_board_info(void)
+{
+	unsigned int socinfo;
+
+	/* print board information */
+	print_board_model();
+
+	socinfo = get_socinfo();
+	if (!socinfo)
+		return 0;
+
+	printf("SoC:   Amlogic Meson %s (%s) Revision %x:%x (%x:%x)\n",
+	       socinfo_to_soc_id(socinfo),
+	       socinfo_to_package_id(socinfo),
+	       socinfo_to_major(socinfo),
+	       socinfo_to_minor(socinfo),
+	       socinfo_to_pack(socinfo),
+	       socinfo_to_misc(socinfo));
+
+	return 0;
+}
+
+int meson_get_soc_rev(char *buff, size_t buff_len)
+{
+	unsigned int socinfo;
+
+	socinfo = get_socinfo();
+	if (!socinfo)
+		return -1;
+
+	/* Write SoC info */
+	return snprintf(buff, buff_len, "%x", socinfo_to_minor(socinfo));
+}
diff --git a/roms/u-boot/arch/arm/mach-meson/sm.c b/roms/u-boot/arch/arm/mach-meson/sm.c
new file mode 100644
index 000000000..1a8f23cb1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-meson/sm.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * Secure monitor calls.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <env.h>
+#include <log.h>
+#include <asm/arch/sm.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/ptrace.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <dm.h>
+#include <linux/bitfield.h>
+#include <regmap.h>
+#include <syscon.h>
+
+#define FN_GET_SHARE_MEM_INPUT_BASE	0x82000020
+#define FN_GET_SHARE_MEM_OUTPUT_BASE	0x82000021
+#define FN_EFUSE_READ			0x82000030
+#define FN_EFUSE_WRITE			0x82000031
+#define FN_CHIP_ID			0x82000044
+
+static void *shmem_input;
+static void *shmem_output;
+
+static void meson_init_shmem(void)
+{
+	struct pt_regs regs;
+
+	if (shmem_input && shmem_output)
+		return;
+
+	regs.regs[0] = FN_GET_SHARE_MEM_INPUT_BASE;
+	smc_call(&regs);
+	shmem_input = (void *)regs.regs[0];
+
+	regs.regs[0] = FN_GET_SHARE_MEM_OUTPUT_BASE;
+	smc_call(&regs);
+	shmem_output = (void *)regs.regs[0];
+
+	debug("Secure Monitor shmem: 0x%p 0x%p\n", shmem_input, shmem_output);
+}
+
+ssize_t meson_sm_read_efuse(uintptr_t offset, void *buffer, size_t size)
+{
+	struct pt_regs regs;
+
+	meson_init_shmem();
+
+	regs.regs[0] = FN_EFUSE_READ;
+	regs.regs[1] = offset;
+	regs.regs[2] = size;
+
+	smc_call(&regs);
+
+	if (regs.regs[0] == 0)
+		return -1;
+
+	memcpy(buffer, shmem_output, min(size, regs.regs[0]));
+
+	return regs.regs[0];
+}
+
+#define SM_CHIP_ID_LENGTH	119
+#define SM_CHIP_ID_OFFSET	4
+#define SM_CHIP_ID_SIZE		12
+
+int meson_sm_get_serial(void *buffer, size_t size)
+{
+	struct pt_regs regs;
+
+	meson_init_shmem();
+
+	regs.regs[0] = FN_CHIP_ID;
+	regs.regs[1] = 0;
+	regs.regs[2] = 0;
+
+	smc_call(&regs);
+
+	memcpy(buffer, shmem_output + SM_CHIP_ID_OFFSET,
+	       min_t(size_t, size, SM_CHIP_ID_SIZE));
+
+	return 0;
+}
+
+#define AO_SEC_SD_CFG15		0xfc
+#define REBOOT_REASON_MASK	GENMASK(15, 12)
+
+int meson_sm_get_reboot_reason(void)
+{
+	struct regmap *regmap;
+	int nodeoffset;
+	ofnode node;
+	unsigned int reason;
+
+	/* find the offset of compatible node */
+	nodeoffset = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+						   "amlogic,meson-gx-ao-secure");
+	if (nodeoffset < 0) {
+		printf("%s: failed to get amlogic,meson-gx-ao-secure\n",
+		       __func__);
+		return -ENODEV;
+	}
+
+	/* get regmap from the syscon node */
+	node = offset_to_ofnode(nodeoffset);
+	regmap = syscon_node_to_regmap(node);
+	if (IS_ERR(regmap)) {
+		printf("%s: failed to get regmap\n", __func__);
+		return -EINVAL;
+	}
+
+	regmap_read(regmap, AO_SEC_SD_CFG15, &reason);
+
+	/* The SMC call is not used, we directly use AO_SEC_SD_CFG15 */
+	return FIELD_GET(REBOOT_REASON_MASK, reason);
+}
+
+static int do_sm_serial(struct cmd_tbl *cmdtp, int flag, int argc,
+			char *const argv[])
+{
+	ulong address;
+	int ret;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	address = simple_strtoul(argv[1], NULL, 0);
+
+	ret = meson_sm_get_serial((void *)address, SM_CHIP_ID_SIZE);
+	if (ret)
+		return CMD_RET_FAILURE;
+
+	return CMD_RET_SUCCESS;
+}
+
+#define MAX_REBOOT_REASONS 14
+
+static const char *reboot_reasons[MAX_REBOOT_REASONS] = {
+	[REBOOT_REASON_COLD] = "cold_boot",
+	[REBOOT_REASON_NORMAL] = "normal",
+	[REBOOT_REASON_RECOVERY] = "recovery",
+	[REBOOT_REASON_UPDATE] = "update",
+	[REBOOT_REASON_FASTBOOT] = "fastboot",
+	[REBOOT_REASON_SUSPEND_OFF] = "suspend_off",
+	[REBOOT_REASON_HIBERNATE] = "hibernate",
+	[REBOOT_REASON_BOOTLOADER] = "bootloader",
+	[REBOOT_REASON_SHUTDOWN_REBOOT] = "shutdown_reboot",
+	[REBOOT_REASON_RPMBP] = "rpmbp",
+	[REBOOT_REASON_CRASH_DUMP] = "crash_dump",
+	[REBOOT_REASON_KERNEL_PANIC] = "kernel_panic",
+	[REBOOT_REASON_WATCHDOG_REBOOT] = "watchdog_reboot",
+};
+
+static int do_sm_reboot_reason(struct cmd_tbl *cmdtp, int flag, int argc,
+			       char *const argv[])
+{
+	const char *reason_str;
+	char *destarg = NULL;
+	int reason;
+
+	if (argc > 1)
+		destarg = argv[1];
+
+	reason = meson_sm_get_reboot_reason();
+	if (reason < 0)
+		return CMD_RET_FAILURE;
+
+	if (reason >= MAX_REBOOT_REASONS ||
+	    !reboot_reasons[reason])
+		reason_str = "unknown";
+	else
+		reason_str = reboot_reasons[reason];
+
+	if (destarg)
+		env_set(destarg, reason_str);
+	else
+		printf("reboot reason: %s (%x)\n", reason_str, reason);
+
+	return CMD_RET_SUCCESS;
+}
+
+static struct cmd_tbl cmd_sm_sub[] = {
+	U_BOOT_CMD_MKENT(serial, 2, 1, do_sm_serial, "", ""),
+	U_BOOT_CMD_MKENT(reboot_reason, 1, 1, do_sm_reboot_reason, "", ""),
+};
+
+static int do_sm(struct cmd_tbl *cmdtp, int flag, int argc,
+		 char *const argv[])
+{
+	struct cmd_tbl *c;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	/* Strip off leading 'sm' command argument */
+	argc--;
+	argv++;
+
+	c = find_cmd_tbl(argv[0], &cmd_sm_sub[0], ARRAY_SIZE(cmd_sm_sub));
+
+	if (c)
+		return c->cmd(cmdtp, flag, argc, argv);
+	else
+		return CMD_RET_USAGE;
+}
+
+U_BOOT_CMD(
+	sm, 5, 0, do_sm,
+	"Secure Monitor Control",
+	"serial <address> - read chip unique id to memory address\n"
+	"sm reboot_reason [name] - get reboot reason and store to to environment"
+);
diff --git a/roms/u-boot/arch/arm/mach-mvebu/.gitignore b/roms/u-boot/arch/arm/mach-mvebu/.gitignore
new file mode 100644
index 000000000..775b9346b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/.gitignore
@@ -0,0 +1 @@
+kwbimage.cfg
diff --git a/roms/u-boot/arch/arm/mach-mvebu/Kconfig b/roms/u-boot/arch/arm/mach-mvebu/Kconfig
new file mode 100644
index 000000000..cda65f747
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/Kconfig
@@ -0,0 +1,314 @@
+if ARCH_MVEBU
+
+config HAVE_MVEBU_EFUSE
+	bool
+	default n
+
+config ARMADA_32BIT
+	bool
+	select ARCH_MISC_INIT
+	select BOARD_EARLY_INIT_F
+	select CPU_V7A
+	select SPL_DM if SPL
+	select SPL_DM_SEQ_ALIAS if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_SIMPLE_BUS if SPL
+	select SUPPORT_SPL
+	select TRANSLATION_OFFSET
+
+config ARMADA_64BIT
+	bool
+	select ARM64
+
+# ARMv7 SoCs...
+config ARMADA_375
+	bool
+	select ARMADA_32BIT
+
+config ARMADA_38X
+	bool
+	select ARMADA_32BIT
+	select HAVE_MVEBU_EFUSE
+
+config ARMADA_38X_HS_IMPEDANCE_THRESH
+	hex  "Armada 38x USB 2.0 High-Speed Impedance Threshold (0x0 - 0x7)"
+	depends on ARMADA_38X
+	default 0x6
+	range 0x0 0x7
+
+config ARMADA_XP
+	bool
+	select ARMADA_32BIT
+
+# ARMv8 SoCs...
+config ARMADA_3700
+	bool
+	select ARM64
+
+# Armada 7K and 8K are very similar - use only one Kconfig symbol for both
+config ARMADA_8K
+	bool
+	select ARM64
+
+# Armada PLL frequency (used for NAND clock generation)
+config SYS_MVEBU_PLL_CLOCK
+	int
+	default "2000000000" if ARMADA_XP || ARMADA_3700 || ARMADA_8K || ARMADA_MSYS
+	default "1000000000" if ARMADA_38X || ARMADA_375
+
+# Armada XP/38x SoC types...
+config MV78230
+	bool
+	select ARMADA_XP
+
+config MV78260
+	bool
+	select ARMADA_XP
+	imply CMD_SATA
+
+config MV78460
+	bool
+	select ARMADA_XP
+
+config ARMADA_MSYS
+	bool
+	select ARMADA_32BIT
+
+config 98DX4251
+	bool
+	select ARMADA_MSYS
+
+config 98DX3336
+	bool
+	select ARMADA_MSYS
+
+config 98DX3236
+	bool
+	select ARMADA_MSYS
+
+config 88F6820
+	bool
+	select ARMADA_38X
+
+choice
+	prompt "Armada XP/375/38x/3700/7K/8K board select"
+	optional
+
+config TARGET_CLEARFOG
+	bool "Support ClearFog"
+	select 88F6820
+	select BOARD_LATE_INIT
+
+config TARGET_HELIOS4
+	bool "Support Helios4"
+	select 88F6820
+
+config TARGET_MVEBU_ARMADA_37XX
+	bool "Support Armada 37xx platforms"
+	select ARMADA_3700
+	imply SCSI
+
+config TARGET_DB_88F6720
+	bool "Support DB-88F6720 Armada 375"
+	select ARMADA_375
+
+config TARGET_DB_88F6820_GP
+	bool "Support DB-88F6820-GP"
+	select 88F6820
+
+config TARGET_DB_88F6820_AMC
+	bool "Support DB-88F6820-AMC"
+	select 88F6820
+
+config TARGET_TURRIS_OMNIA
+	bool "Support Turris Omnia"
+	select 88F6820
+	select BOARD_LATE_INIT
+	select DM_I2C
+	select I2C_MUX
+	select I2C_MUX_PCA954x
+	select SPL_I2C_MUX
+	select SYS_I2C_MVTWSI
+	select ATSHA204A
+
+config TARGET_TURRIS_MOX
+	bool "Support Turris Mox"
+	select ARMADA_3700
+
+config TARGET_MVEBU_ARMADA_8K
+	bool "Support Armada 7k/8k platforms"
+	select ARMADA_8K
+	select BOARD_LATE_INIT
+	imply SCSI
+
+config TARGET_OCTEONTX2_CN913x
+	bool "Support CN913x platforms"
+	select ARMADA_8K
+	imply BOARD_EARLY_INIT_R
+	select BOARD_LATE_INIT
+	imply SCSI
+
+config TARGET_DB_MV784MP_GP
+	bool "Support db-mv784mp-gp"
+	select MV78460
+
+config TARGET_DS414
+	bool "Support Synology DS414"
+	select MV78230
+
+config TARGET_MAXBCM
+	bool "Support maxbcm"
+	select MV78460
+
+config TARGET_THEADORABLE
+	bool "Support theadorable Armada XP"
+	select BOARD_LATE_INIT if USB
+	select MV78260
+	imply CMD_SATA
+
+config TARGET_CONTROLCENTERDC
+	bool "Support CONTROLCENTERDC"
+	select 88F6820
+
+config TARGET_X530
+	bool "Support Allied Telesis x530"
+	select 88F6820
+
+config TARGET_DB_XC3_24G4XG
+	bool "Support DB-XC3-24G4XG"
+	select 98DX3336
+
+config TARGET_CRS3XX_98DX3236
+	bool "Support CRS3XX-98DX3236"
+	select 98DX3236
+
+endchoice
+
+config SYS_BOARD
+	default "clearfog" if TARGET_CLEARFOG
+	default "helios4" if TARGET_HELIOS4
+	default "mvebu_armada-37xx" if TARGET_MVEBU_ARMADA_37XX
+	default "db-88f6720" if TARGET_DB_88F6720
+	default "db-88f6820-gp" if TARGET_DB_88F6820_GP
+	default "db-88f6820-amc" if TARGET_DB_88F6820_AMC
+	default "turris_omnia" if TARGET_TURRIS_OMNIA
+	default "turris_mox" if TARGET_TURRIS_MOX
+	default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K
+	default "octeontx2_cn913x" if TARGET_OCTEONTX2_CN913x
+	default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
+	default "ds414" if TARGET_DS414
+	default "maxbcm" if TARGET_MAXBCM
+	default "theadorable" if TARGET_THEADORABLE
+	default "a38x" if TARGET_CONTROLCENTERDC
+	default "x530" if TARGET_X530
+	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
+	default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
+
+config SYS_CONFIG_NAME
+	default "clearfog" if TARGET_CLEARFOG
+	default "helios4" if TARGET_HELIOS4
+	default "mvebu_armada-37xx" if TARGET_MVEBU_ARMADA_37XX
+	default "db-88f6720" if TARGET_DB_88F6720
+	default "db-88f6820-gp" if TARGET_DB_88F6820_GP
+	default "db-88f6820-amc" if TARGET_DB_88F6820_AMC
+	default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K
+	default "mvebu_armada-8k" if TARGET_OCTEONTX2_CN913x
+	default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
+	default "ds414" if TARGET_DS414
+	default "maxbcm" if TARGET_MAXBCM
+	default "theadorable" if TARGET_THEADORABLE
+	default "turris_omnia" if TARGET_TURRIS_OMNIA
+	default "turris_mox" if TARGET_TURRIS_MOX
+	default "controlcenterdc" if TARGET_CONTROLCENTERDC
+	default "x530" if TARGET_X530
+	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
+	default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
+
+config SYS_VENDOR
+	default "Marvell" if TARGET_DB_MV784MP_GP
+	default "Marvell" if TARGET_MVEBU_ARMADA_37XX
+	default "Marvell" if TARGET_DB_88F6720
+	default "Marvell" if TARGET_DB_88F6820_GP
+	default "Marvell" if TARGET_DB_88F6820_AMC
+	default "Marvell" if TARGET_MVEBU_ARMADA_8K
+	default "Marvell" if TARGET_OCTEONTX2_CN913x
+	default "Marvell" if TARGET_DB_XC3_24G4XG
+	default "Marvell" if TARGET_MVEBU_DB_88F7040
+	default "solidrun" if TARGET_CLEARFOG
+	default "kobol" if TARGET_HELIOS4
+	default "Synology" if TARGET_DS414
+	default "CZ.NIC" if TARGET_TURRIS_OMNIA
+	default "CZ.NIC" if TARGET_TURRIS_MOX
+	default "gdsys" if TARGET_CONTROLCENTERDC
+	default "alliedtelesis" if TARGET_X530
+	default "mikrotik" if TARGET_CRS3XX_98DX3236
+
+config SYS_SOC
+	default "mvebu"
+
+choice
+	prompt "Boot method"
+	depends on SPL
+
+config MVEBU_SPL_BOOT_DEVICE_SPI
+	bool "SPI NOR flash"
+	imply ENV_IS_IN_SPI_FLASH
+	select SPL_DM_SPI
+	select SPL_SPI_FLASH_SUPPORT
+	select SPL_SPI_LOAD
+	select SPL_SPI_SUPPORT
+
+config MVEBU_SPL_BOOT_DEVICE_MMC
+	bool "SDIO/MMC card"
+	imply ENV_IS_IN_MMC
+	# GPIO needed for eMMC/SD card presence detection
+	select SPL_DM_GPIO
+	select SPL_DM_MMC
+	select SPL_GPIO_SUPPORT
+	select SPL_LIBDISK_SUPPORT
+	select SPL_MMC_SUPPORT
+
+config MVEBU_SPL_BOOT_DEVICE_SATA
+	bool "SATA"
+	select SPL_SATA_SUPPORT
+	select SPL_LIBDISK_SUPPORT
+
+config MVEBU_SPL_BOOT_DEVICE_UART
+	bool "UART"
+
+endchoice
+
+config MVEBU_EFUSE
+	bool "Enable eFuse support"
+	default n
+	depends on HAVE_MVEBU_EFUSE
+	help
+	  Enable support for reading and writing eFuses on mvebu SoCs.
+
+config MVEBU_EFUSE_FAKE
+	bool "Fake eFuse access (dry run)"
+	default n
+	depends on MVEBU_EFUSE
+	help
+	  This enables a "dry run" mode where eFuses are not really programmed.
+	  Instead the eFuse accesses are emulated by writing to and reading
+	  from a memory block.
+	  This is can be used for testing prog scripts.
+
+config SECURED_MODE_IMAGE
+	bool "Build image for trusted boot"
+	default false
+	depends on 88F6820
+	help
+	  Build an image that employs the ARMADA SoC's trusted boot framework
+	  for securely booting images.
+
+config SECURED_MODE_CSK_INDEX
+	int "Index of active CSK"
+	default 0
+	depends on SECURED_MODE_IMAGE
+
+source "board/solidrun/clearfog/Kconfig"
+source "board/kobol/helios4/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-mvebu/Makefile b/roms/u-boot/arch/arm/mach-mvebu/Makefile
new file mode 100644
index 000000000..7e9c206ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/Makefile
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2014-2016 Stefan Roese <sr@denx.de>
+
+ifdef CONFIG_ARM64
+
+obj-$(CONFIG_ARMADA_3700) += armada3700/
+obj-$(CONFIG_ARMADA_8K) += armada8k/
+obj-y += arm64-common.o
+
+else # CONFIG_ARM64
+
+ifdef CONFIG_ARCH_KIRKWOOD
+
+obj-y	= dram.o
+obj-y	+= gpio.o
+obj-y	+= mbus.o
+obj-y	+= timer.o
+
+else # CONFIG_ARCH_KIRKWOOD
+
+obj-y	= cpu.o
+obj-y	+= dram.o
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o
+obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
+obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
+obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o
+obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
+
+extra-y += kwbimage.cfg
+
+KWB_REPLACE += BOOT_FROM
+ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),)
+	KWB_CFG_BOOT_FROM=spi
+endif
+ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),)
+	KWB_CFG_BOOT_FROM=sdio
+endif
+ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA),)
+	KWB_CFG_BOOT_FROM=sata
+endif
+ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_UART),)
+	KWB_CFG_BOOT_FROM=uart
+endif
+
+ifneq ($(CONFIG_SECURED_MODE_IMAGE),)
+KWB_REPLACE += CSK_INDEX
+KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX)
+
+KWB_REPLACE += SEC_BOOT_DEV
+KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \
+	$(if $(findstring BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \
+	$(if $(findstring BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \
+	)
+
+KWB_REPLACE += SEC_FUSE_DUMP
+KWB_CFG_SEC_FUSE_DUMP = a38x
+endif
+
+$(obj)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \
+		include/config/auto.conf
+	$(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \
+	<$< >$(dir $@)$(@F)
+
+endif # CONFIG_SPL_BUILD
+obj-y	+= gpio.o
+obj-y	+= mbus.o
+obj-y	+= timer.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
+obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o
+
+obj-$(CONFIG_ARMADA_38X) += serdes/a38x/
+obj-$(CONFIG_ARMADA_XP) += serdes/axp/
+
+endif # CONFIG_ARCH_KIRKWOOD
+endif # CONFIG_ARM64
diff --git a/roms/u-boot/arch/arm/mach-mvebu/arm64-common.c b/roms/u-boot/arch/arm/mach-mvebu/arm64-common.c
new file mode 100644
index 000000000..fa687d8ab
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/arm64-common.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/ptrace.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Not all memory is mapped in the MMU. So we need to restrict the
+ * memory size so that U-Boot does not try to access it. Also, the
+ * internal registers are located at 0xf000.0000 - 0xffff.ffff.
+ * Currently only 2GiB are mapped for system memory. This is what
+ * we pass to the U-Boot subsystem here.
+ */
+#define USABLE_RAM_SIZE		0x80000000
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	if (gd->ram_size > USABLE_RAM_SIZE)
+		return USABLE_RAM_SIZE;
+
+	return gd->ram_size;
+}
+
+/*
+ * On ARMv8, MBus is not configured in U-Boot. To enable compilation
+ * of the already implemented drivers, lets add a dummy version of
+ * this function so that linking does not fail.
+ */
+const struct mbus_dram_target_info *mvebu_mbus_dram_info(void)
+{
+	return NULL;
+}
+
+__weak int dram_init_banksize(void)
+{
+	if (CONFIG_IS_ENABLED(ARMADA_8K))
+		return a8k_dram_init_banksize();
+	else if (CONFIG_IS_ENABLED(ARMADA_3700))
+		return a3700_dram_init_banksize();
+	else
+		return fdtdec_setup_memory_banksize();
+}
+
+__weak int dram_init(void)
+{
+	if (CONFIG_IS_ENABLED(ARMADA_8K)) {
+		gd->ram_size = a8k_dram_scan_ap_sz();
+		if (gd->ram_size != 0)
+			return 0;
+	}
+
+	if (CONFIG_IS_ENABLED(ARMADA_3700))
+		return a3700_dram_init();
+
+	if (fdtdec_setup_mem_size_base() != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+int arch_cpu_init(void)
+{
+	/* Nothing to do (yet) */
+	return 0;
+}
+
+int arch_early_init_r(void)
+{
+	struct udevice *dev;
+	int ret;
+	int i;
+
+	/*
+	 * Loop over all MISC uclass drivers to call the comphy code
+	 * and init all CP110 devices enabled in the DT
+	 */
+	i = 0;
+	while (1) {
+		/* Call the comphy code via the MISC uclass driver */
+		ret = uclass_get_device(UCLASS_MISC, i++, &dev);
+
+		/* We're done, once no further CP110 device is found */
+		if (ret)
+			break;
+	}
+
+	/* Cause the SATA device to do its early init */
+	uclass_first_device(UCLASS_AHCI, &dev);
+
+#ifdef CONFIG_DM_PCI
+	/* Trigger PCIe devices detection */
+	pci_init();
+#endif
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/armada3700/Makefile b/roms/u-boot/arch/arm/mach-mvebu/armada3700/Makefile
new file mode 100644
index 000000000..031b3e854
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/armada3700/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2016 Stefan Roese <sr@denx.de>
+
+obj-y = cpu.o
diff --git a/roms/u-boot/arch/arm/mach-mvebu/armada3700/cpu.c b/roms/u-boot/arch/arm/mach-mvebu/armada3700/cpu.c
new file mode 100644
index 000000000..9aec0ce9a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/armada3700/cpu.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ * Copyright (C) 2020 Marek Behun <marek.behun@nic.cz>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <linux/bitops.h>
+#include <linux/libfdt.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/armv8/mmu.h>
+#include <sort.h>
+
+/* Armada 3700 */
+#define MVEBU_GPIO_NB_REG_BASE		(MVEBU_REGISTER(0x13800))
+
+#define MVEBU_TEST_PIN_LATCH_N		(MVEBU_GPIO_NB_REG_BASE + 0x8)
+#define MVEBU_XTAL_MODE_MASK		BIT(9)
+#define MVEBU_XTAL_MODE_OFFS		9
+#define MVEBU_XTAL_CLOCK_25MHZ		0x0
+#define MVEBU_XTAL_CLOCK_40MHZ		0x1
+
+#define MVEBU_NB_WARM_RST_REG		(MVEBU_GPIO_NB_REG_BASE + 0x40)
+#define MVEBU_NB_WARM_RST_MAGIC_NUM	0x1d1e
+
+/* Armada 3700 CPU Address Decoder registers */
+#define MVEBU_CPU_DEC_WIN_REG_BASE	(size_t)(MVEBU_REGISTER(0xcf00))
+#define MVEBU_CPU_DEC_WIN_CTRL(w) \
+	(MVEBU_CPU_DEC_WIN_REG_BASE + ((w) << 4))
+#define MVEBU_CPU_DEC_WIN_CTRL_EN	BIT(0)
+#define MVEBU_CPU_DEC_WIN_CTRL_TGT_MASK	0xf
+#define MVEBU_CPU_DEC_WIN_CTRL_TGT_OFFS	4
+#define MVEBU_CPU_DEC_WIN_CTRL_TGT_DRAM	0
+#define MVEBU_CPU_DEC_WIN_CTRL_TGT_PCIE	2
+#define MVEBU_CPU_DEC_WIN_SIZE(w)	(MVEBU_CPU_DEC_WIN_CTRL(w) + 0x4)
+#define MVEBU_CPU_DEC_WIN_BASE(w)	(MVEBU_CPU_DEC_WIN_CTRL(w) + 0x8)
+#define MVEBU_CPU_DEC_WIN_REMAP(w)	(MVEBU_CPU_DEC_WIN_CTRL(w) + 0xc)
+#define MVEBU_CPU_DEC_WIN_GRANULARITY	16
+#define MVEBU_CPU_DEC_WINS		5
+
+#define MAX_MEM_MAP_REGIONS		(MVEBU_CPU_DEC_WINS + 2)
+
+#define A3700_PTE_BLOCK_NORMAL \
+	(PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_INNER_SHARE)
+#define A3700_PTE_BLOCK_DEVICE \
+	(PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct mm_region mvebu_mem_map[MAX_MEM_MAP_REGIONS] = {
+	{
+		/*
+		 * SRAM, MMIO regions
+		 * Don't remove this, a3700_build_mem_map needs it.
+		 */
+		.phys = SOC_REGS_PHY_BASE,
+		.virt = SOC_REGS_PHY_BASE,
+		.size = 0x02000000UL,	/* 32MiB internal registers */
+		.attrs = A3700_PTE_BLOCK_DEVICE
+	},
+};
+
+struct mm_region *mem_map = mvebu_mem_map;
+
+static int get_cpu_dec_win(int win, u32 *tgt, u32 *base, u32 *size)
+{
+	u32 reg;
+
+	reg = readl(MVEBU_CPU_DEC_WIN_CTRL(win));
+	if (!(reg & MVEBU_CPU_DEC_WIN_CTRL_EN))
+		return -1;
+
+	if (tgt) {
+		reg >>= MVEBU_CPU_DEC_WIN_CTRL_TGT_OFFS;
+		reg &= MVEBU_CPU_DEC_WIN_CTRL_TGT_MASK;
+		*tgt = reg;
+	}
+
+	if (base) {
+		reg = readl(MVEBU_CPU_DEC_WIN_BASE(win));
+		*base = reg << MVEBU_CPU_DEC_WIN_GRANULARITY;
+	}
+
+	if (size) {
+		/*
+		 * Window size is encoded as the number of 1s from LSB to MSB,
+		 * followed by 0s. The number of 1s specifies the size in 64 KiB
+		 * granularity.
+		 */
+		reg = readl(MVEBU_CPU_DEC_WIN_SIZE(win));
+		*size = ((reg + 1) << MVEBU_CPU_DEC_WIN_GRANULARITY);
+	}
+
+	return 0;
+}
+
+/*
+ * Builds mem_map according to CPU Address Decoder settings, which were set by
+ * the TIMH image on the Cortex-M3 secure processor, or by ARM Trusted Firmware
+ */
+static void build_mem_map(void)
+{
+	int win, region;
+
+	region = 1;
+	for (win = 0; win < MVEBU_CPU_DEC_WINS; ++win) {
+		u32 base, tgt, size;
+		u64 attrs;
+
+		/* skip disabled windows */
+		if (get_cpu_dec_win(win, &tgt, &base, &size))
+			continue;
+
+		if (tgt == MVEBU_CPU_DEC_WIN_CTRL_TGT_DRAM)
+			attrs = A3700_PTE_BLOCK_NORMAL;
+		else if (tgt == MVEBU_CPU_DEC_WIN_CTRL_TGT_PCIE)
+			attrs = A3700_PTE_BLOCK_DEVICE;
+		else
+			/* skip windows with other targets */
+			continue;
+
+		mvebu_mem_map[region].phys = base;
+		mvebu_mem_map[region].virt = base;
+		mvebu_mem_map[region].size = size;
+		mvebu_mem_map[region].attrs = attrs;
+		++region;
+	}
+
+	/* add list terminator */
+	mvebu_mem_map[region].size = 0;
+	mvebu_mem_map[region].attrs = 0;
+}
+
+void enable_caches(void)
+{
+	build_mem_map();
+
+	icache_enable();
+	dcache_enable();
+}
+
+int a3700_dram_init(void)
+{
+	int win;
+
+	gd->ram_size = 0;
+	for (win = 0; win < MVEBU_CPU_DEC_WINS; ++win) {
+		u32 base, tgt, size;
+
+		/* skip disabled windows */
+		if (get_cpu_dec_win(win, &tgt, &base, &size))
+			continue;
+
+		/* skip non-DRAM windows */
+		if (tgt != MVEBU_CPU_DEC_WIN_CTRL_TGT_DRAM)
+			continue;
+
+		/*
+		 * It is possible that one image was built for boards with
+		 * different RAM sizes, for example 512 MiB and 1 GiB.
+		 * We therefore try to determine the actual RAM size in the
+		 * window with get_ram_size.
+		 */
+		gd->ram_size += get_ram_size((void *)(size_t)base, size);
+	}
+
+	return 0;
+}
+
+struct a3700_dram_window {
+	size_t base, size;
+};
+
+static int dram_win_cmp(const void *a, const void *b)
+{
+	size_t ab, bb;
+
+	ab = ((const struct a3700_dram_window *)a)->base;
+	bb = ((const struct a3700_dram_window *)b)->base;
+
+	if (ab < bb)
+		return -1;
+	else if (ab > bb)
+		return 1;
+	else
+		return 0;
+}
+
+int a3700_dram_init_banksize(void)
+{
+	struct a3700_dram_window dram_wins[MVEBU_CPU_DEC_WINS];
+	int bank, win, ndram_wins;
+	u32 last_end;
+	size_t size;
+
+	ndram_wins = 0;
+	for (win = 0; win < MVEBU_CPU_DEC_WINS; ++win) {
+		u32 base, tgt, size;
+
+		/* skip disabled windows */
+		if (get_cpu_dec_win(win, &tgt, &base, &size))
+			continue;
+
+		/* skip non-DRAM windows */
+		if (tgt != MVEBU_CPU_DEC_WIN_CTRL_TGT_DRAM)
+			continue;
+
+		dram_wins[win].base = base;
+		dram_wins[win].size = size;
+		++ndram_wins;
+	}
+
+	qsort(dram_wins, ndram_wins, sizeof(dram_wins[0]), dram_win_cmp);
+
+	bank = 0;
+	last_end = -1;
+
+	for (win = 0; win < ndram_wins; ++win) {
+		/* again determining actual RAM size as in a3700_dram_init */
+		size = get_ram_size((void *)dram_wins[win].base,
+				    dram_wins[win].size);
+
+		/*
+		 * Check if previous window ends as the current starts. If yes,
+		 * merge these windows into one "bank". This is possible by this
+		 * simple check thanks to mem_map regions being qsorted in
+		 * build_mem_map.
+		 */
+		if (last_end == dram_wins[win].base) {
+			gd->bd->bi_dram[bank - 1].size += size;
+			last_end += size;
+		} else {
+			if (bank == CONFIG_NR_DRAM_BANKS) {
+				printf("Need more CONFIG_NR_DRAM_BANKS\n");
+				return -ENOBUFS;
+			}
+
+			gd->bd->bi_dram[bank].start = dram_wins[win].base;
+			gd->bd->bi_dram[bank].size = size;
+			last_end = dram_wins[win].base + size;
+			++bank;
+		}
+	}
+
+	/*
+	 * If there is more place for DRAM BANKS definitions than needed, fill
+	 * the rest with zeros.
+	 */
+	for (; bank < CONFIG_NR_DRAM_BANKS; ++bank) {
+		gd->bd->bi_dram[bank].start = 0;
+		gd->bd->bi_dram[bank].size = 0;
+	}
+
+	return 0;
+}
+
+static u32 find_pcie_window_base(void)
+{
+	int win;
+
+	for (win = 0; win < MVEBU_CPU_DEC_WINS; ++win) {
+		u32 base, tgt;
+
+		/* skip disabled windows */
+		if (get_cpu_dec_win(win, &tgt, &base, NULL))
+			continue;
+
+		if (tgt == MVEBU_CPU_DEC_WIN_CTRL_TGT_PCIE)
+			return base;
+	}
+
+	return -1;
+}
+
+static int fdt_setprop_inplace_u32_partial(void *blob, int node,
+					   const char *name,
+					   u32 idx, u32 val)
+{
+	val = cpu_to_fdt32(val);
+
+	return fdt_setprop_inplace_namelen_partial(blob, node, name,
+						   strlen(name),
+						   idx * sizeof(u32),
+						   &val, sizeof(u32));
+}
+
+int a3700_fdt_fix_pcie_regions(void *blob)
+{
+	int acells, pacells, scells;
+	u32 base, fix_offset;
+	const u32 *ranges;
+	int node, pnode;
+	int ret, i, len;
+
+	base = find_pcie_window_base();
+	if (base == -1)
+		return -ENOENT;
+
+	node = fdt_node_offset_by_compatible(blob, -1, "marvell,armada-3700-pcie");
+	if (node < 0)
+		return node;
+
+	ranges = fdt_getprop(blob, node, "ranges", &len);
+	if (!ranges || len % sizeof(u32))
+		return -ENOENT;
+
+	/*
+	 * The "ranges" property is an array of
+	 * { <child address> <parent address> <size in child address space> }
+	 *
+	 * All 3 elements can span a diffent number of cells. Fetch their sizes.
+	 */
+	pnode = fdt_parent_offset(blob, node);
+	acells = fdt_address_cells(blob, node);
+	pacells = fdt_address_cells(blob, pnode);
+	scells = fdt_size_cells(blob, node);
+
+	/* Child PCI addresses always use 3 cells */
+	if (acells != 3)
+		return -ENOENT;
+
+	/* Calculate fixup offset from first child address (in last cell) */
+	fix_offset = base - fdt32_to_cpu(ranges[2]);
+
+	/*
+	 * Fix address (last cell) of each child address and each parent
+	 * address
+	 */
+	for (i = 0; i < len / sizeof(u32); i += acells + pacells + scells) {
+		int idx;
+
+		/* fix child address */
+		idx = i + acells - 1;
+		ret = fdt_setprop_inplace_u32_partial(blob, node, "ranges", idx,
+						      fdt32_to_cpu(ranges[idx]) +
+						      fix_offset);
+		if (ret)
+			return ret;
+
+		/* fix parent address */
+		idx = i + acells + pacells - 1;
+		ret = fdt_setprop_inplace_u32_partial(blob, node, "ranges", idx,
+						      fdt32_to_cpu(ranges[idx]) +
+						      fix_offset);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+void reset_cpu(void)
+{
+	/*
+	 * Write magic number of 0x1d1e to North Bridge Warm Reset register
+	 * to trigger warm reset
+	 */
+	writel(MVEBU_NB_WARM_RST_MAGIC_NUM, MVEBU_NB_WARM_RST_REG);
+}
+
+/*
+ * get_ref_clk
+ *
+ * return: reference clock in MHz (25 or 40)
+ */
+u32 get_ref_clk(void)
+{
+	u32 regval;
+
+	regval = (readl(MVEBU_TEST_PIN_LATCH_N) & MVEBU_XTAL_MODE_MASK) >>
+		MVEBU_XTAL_MODE_OFFS;
+
+	if (regval == MVEBU_XTAL_CLOCK_25MHZ)
+		return 25;
+	else
+		return 40;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/armada8k/Makefile b/roms/u-boot/arch/arm/mach-mvebu/armada8k/Makefile
new file mode 100644
index 000000000..0a4756717
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/armada8k/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2016 Stefan Roese <sr@denx.de>
+
+obj-y = cpu.o cache_llc.o dram.o
diff --git a/roms/u-boot/arch/arm/mach-mvebu/armada8k/cache_llc.S b/roms/u-boot/arch/arm/mach-mvebu/armada8k/cache_llc.S
new file mode 100644
index 000000000..d78b33cbf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/armada8k/cache_llc.S
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ */
+
+#include <asm/arch-armada8k/cache_llc.h>
+#include <linux/linkage.h>
+
+/*
+ * int __asm_flush_l3_dcache
+ *
+ * flush Armada-8K last level cache.
+ *
+ */
+ENTRY(__asm_flush_l3_dcache)
+	/* flush cache */
+	mov     x0, #LLC_BASE_ADDR
+	add	x0, x0, #LLC_FLUSH_BY_WAY
+	movk    x0, #MVEBU_A8K_REGS_BASE_MSB, lsl #16
+	mov     w1, #LLC_WAY_MASK
+	str     w1, [x0]
+	/* sync cache */
+	mov     x0, #LLC_BASE_ADDR
+	add	x0, x0, #LLC_CACHE_SYNC
+	movk    x0, #MVEBU_A8K_REGS_BASE_MSB, lsl #16
+	str     wzr, [x0]
+	/* check that cache sync completed */
+	mov     x0, #LLC_BASE_ADDR
+	add	x0, x0, #LLC_CACHE_SYNC_COMPLETE
+	movk    x0, #MVEBU_A8K_REGS_BASE_MSB, lsl #16
+1:	ldr	w1, [x0]
+	and	w1, w1, #LLC_CACHE_SYNC_MASK
+	cbnz	w1, 1b
+	/* return success */
+	mov	x0, #0
+	ret
+ENDPROC(__asm_flush_l3_dcache)
diff --git a/roms/u-boot/arch/arm/mach-mvebu/armada8k/cpu.c b/roms/u-boot/arch/arm/mach-mvebu/armada8k/cpu.c
new file mode 100644
index 000000000..939abce00
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/armada8k/cpu.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/armv8/mmu.h>
+#include <mach/fw_info.h>
+
+/* Armada 7k/8k */
+#define MVEBU_RFU_BASE			(MVEBU_REGISTER(0x6f0000))
+#define RFU_GLOBAL_SW_RST		(MVEBU_RFU_BASE + 0x84)
+#define RFU_SW_RESET_OFFSET		0
+
+#define SAR0_REG			(MVEBU_REGISTER(0x2400200))
+#define BOOT_MODE_MASK			0x3f
+#define BOOT_MODE_OFFSET		4
+
+static struct mm_region mvebu_mem_map[] = {
+	/* Armada 80x0 memory regions include the CP1 (slave) units */
+	{
+		/* RAM 0-64MB */
+		.phys = 0x0UL,
+		.virt = 0x0UL,
+		.size = ATF_REGION_START,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	},
+	/* ATF and TEE region 0x4000000-0x5400000 not mapped */
+	{
+		/* RAM 66MB-2GB */
+		.phys = ATF_REGION_END,
+		.virt = ATF_REGION_END,
+		.size = SZ_2G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	},
+	{
+		/* MMIO regions */
+		.phys = MMIO_REGS_PHY_BASE,
+		.virt = MMIO_REGS_PHY_BASE,
+		.size = SZ_1G,
+
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	},
+	{
+		0,
+	}
+};
+
+struct mm_region *mem_map = mvebu_mem_map;
+
+void enable_caches(void)
+{
+	icache_enable();
+	dcache_enable();
+}
+
+void reset_cpu(void)
+{
+	u32 reg;
+
+	reg = readl(RFU_GLOBAL_SW_RST);
+	reg &= ~(1 << RFU_SW_RESET_OFFSET);
+	writel(reg, RFU_GLOBAL_SW_RST);
+}
+
+/*
+ * TODO - implement this functionality using platform
+ *        clock driver once it gets available
+ * Return NAND clock in Hz
+ */
+u32 mvebu_get_nand_clock(void)
+{
+	unsigned long NAND_FLASH_CLK_CTRL = 0xF2440700UL;
+	unsigned long NF_CLOCK_SEL_MASK = 0x1;
+	u32 reg;
+
+	reg = readl(NAND_FLASH_CLK_CTRL);
+	if (reg & NF_CLOCK_SEL_MASK)
+		return 400 * 1000000;
+	else
+		return 250 * 1000000;
+}
+
+int mmc_get_env_dev(void)
+{
+	u32 reg;
+	unsigned int boot_mode;
+
+	reg = readl(SAR0_REG);
+	boot_mode = (reg >> BOOT_MODE_OFFSET) & BOOT_MODE_MASK;
+
+	switch (boot_mode) {
+	case 0x28:
+	case 0x2a:
+		return 0;
+	case 0x29:
+	case 0x2b:
+		return 1;
+	}
+
+	return CONFIG_SYS_MMC_ENV_DEV;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/armada8k/dram.c b/roms/u-boot/arch/arm/mach-mvebu/armada8k/dram.c
new file mode 100644
index 000000000..bab375e18
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/armada8k/dram.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/global_data.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MV_SIP_DRAM_SIZE	0x82000010
+
+u64 a8k_dram_scan_ap_sz(void)
+{
+	struct pt_regs pregs;
+
+	pregs.regs[0] = MV_SIP_DRAM_SIZE;
+	pregs.regs[1] = SOC_REGS_PHY_BASE;
+	smc_call(&pregs);
+
+	return pregs.regs[0];
+}
+
+int a8k_dram_init_banksize(void)
+{
+	/*
+	 * The firmware (ATF) leaves a 1G whole above the 3G mark for IO
+	 * devices. Higher RAM is mapped at 4G.
+	 *
+	 * Config 2 DRAM banks:
+	 * Bank 0 - max size 4G - 1G
+	 * Bank 1 - ram size - 4G + 1G
+	 */
+	phys_size_t max_bank0_size = SZ_4G - SZ_1G;
+
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	if (gd->ram_size <= max_bank0_size) {
+		gd->bd->bi_dram[0].size = gd->ram_size;
+		return 0;
+	}
+
+	gd->bd->bi_dram[0].size = max_bank0_size;
+	if (CONFIG_NR_DRAM_BANKS > 1) {
+		gd->bd->bi_dram[1].start = SZ_4G;
+		gd->bd->bi_dram[1].size = gd->ram_size - max_bank0_size;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/cpu.c b/roms/u-boot/arch/arm/mach-mvebu/cpu.c
new file mode 100644
index 000000000..0b935c46f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/cpu.c
@@ -0,0 +1,688 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014-2016 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/mbus.h>
+#include <asm/io.h>
+#include <asm/pl310.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <sdhci.h>
+
+#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
+
+static struct mbus_win windows[] = {
+	/* SPI */
+	{ MBUS_SPI_BASE, MBUS_SPI_SIZE,
+	  CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_SPIFLASH },
+
+	/* NOR */
+	{ MBUS_BOOTROM_BASE, MBUS_BOOTROM_SIZE,
+	  CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_BOOTROM },
+
+#ifdef CONFIG_ARMADA_MSYS
+	/* DFX */
+	{ MBUS_DFX_BASE, MBUS_DFX_SIZE, CPU_TARGET_DFX, 0 },
+#endif
+};
+
+void lowlevel_init(void)
+{
+	/*
+	 * Dummy implementation, we only need LOWLEVEL_INIT
+	 * on Armada to configure CP15 in start.S / cpu_init_cp15()
+	 */
+}
+
+void reset_cpu(void)
+{
+	struct mvebu_system_registers *reg =
+		(struct mvebu_system_registers *)MVEBU_SYSTEM_REG_BASE;
+
+	writel(readl(&reg->rstoutn_mask) | 1, &reg->rstoutn_mask);
+	writel(readl(&reg->sys_soft_rst) | 1, &reg->sys_soft_rst);
+	while (1)
+		;
+}
+
+int mvebu_soc_family(void)
+{
+	u16 devid = (readl(MVEBU_REG_PCIE_DEVID) >> 16) & 0xffff;
+
+	switch (devid) {
+	case SOC_MV78230_ID:
+	case SOC_MV78260_ID:
+	case SOC_MV78460_ID:
+		return MVEBU_SOC_AXP;
+
+	case SOC_88F6720_ID:
+		return MVEBU_SOC_A375;
+
+	case SOC_88F6810_ID:
+	case SOC_88F6820_ID:
+	case SOC_88F6828_ID:
+		return MVEBU_SOC_A38X;
+
+	case SOC_98DX3236_ID:
+	case SOC_98DX3336_ID:
+	case SOC_98DX4251_ID:
+		return MVEBU_SOC_MSYS;
+	}
+
+	return MVEBU_SOC_UNKNOWN;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+
+#if defined(CONFIG_ARMADA_375)
+/* SAR frequency values for Armada 375 */
+static const struct sar_freq_modes sar_freq_tab[] = {
+	{  0,  0x0,  266,  133,  266 },
+	{  1,  0x0,  333,  167,  167 },
+	{  2,  0x0,  333,  167,  222 },
+	{  3,  0x0,  333,  167,  333 },
+	{  4,  0x0,  400,  200,  200 },
+	{  5,  0x0,  400,  200,  267 },
+	{  6,  0x0,  400,  200,  400 },
+	{  7,  0x0,  500,  250,  250 },
+	{  8,  0x0,  500,  250,  334 },
+	{  9,  0x0,  500,  250,  500 },
+	{ 10,  0x0,  533,  267,  267 },
+	{ 11,  0x0,  533,  267,  356 },
+	{ 12,  0x0,  533,  267,  533 },
+	{ 13,  0x0,  600,  300,  300 },
+	{ 14,  0x0,  600,  300,  400 },
+	{ 15,  0x0,  600,  300,  600 },
+	{ 16,  0x0,  666,  333,  333 },
+	{ 17,  0x0,  666,  333,  444 },
+	{ 18,  0x0,  666,  333,  666 },
+	{ 19,  0x0,  800,  400,  267 },
+	{ 20,  0x0,  800,  400,  400 },
+	{ 21,  0x0,  800,  400,  534 },
+	{ 22,  0x0,  900,  450,  300 },
+	{ 23,  0x0,  900,  450,  450 },
+	{ 24,  0x0,  900,  450,  600 },
+	{ 25,  0x0, 1000,  500,  500 },
+	{ 26,  0x0, 1000,  500,  667 },
+	{ 27,  0x0, 1000,  333,  500 },
+	{ 28,  0x0,  400,  400,  400 },
+	{ 29,  0x0, 1100,  550,  550 },
+	{ 0xff, 0xff,    0,   0,   0 }	/* 0xff marks end of array */
+};
+#elif defined(CONFIG_ARMADA_38X)
+/* SAR frequency values for Armada 38x */
+static const struct sar_freq_modes sar_freq_tab[] = {
+	{  0x0,  0x0,  666,  333, 333 },
+	{  0x2,  0x0,  800,  400, 400 },
+	{  0x4,  0x0, 1066,  533, 533 },
+	{  0x6,  0x0, 1200,  600, 600 },
+	{  0x8,  0x0, 1332,  666, 666 },
+	{  0xc,  0x0, 1600,  800, 800 },
+	{ 0x10,  0x0, 1866,  933, 933 },
+	{ 0x13,  0x0, 2000, 1000, 933 },
+	{ 0xff, 0xff,    0,    0,   0 }	/* 0xff marks end of array */
+};
+#elif defined(CONFIG_ARMADA_MSYS)
+static const struct sar_freq_modes sar_freq_tab[] = {
+	{  0x0,	0x0,  400,  400, 400 },
+	{  0x2, 0x0,  667,  333, 667 },
+	{  0x3, 0x0,  800,  400, 800 },
+	{  0x5, 0x0,  800,  400, 800 },
+	{ 0xff, 0xff,    0,   0,   0 }	/* 0xff marks end of array */
+};
+#else
+/* SAR frequency values for Armada XP */
+static const struct sar_freq_modes sar_freq_tab[] = {
+	{  0xa,  0x5,  800, 400, 400 },
+	{  0x1,  0x5, 1066, 533, 533 },
+	{  0x2,  0x5, 1200, 600, 600 },
+	{  0x2,  0x9, 1200, 600, 400 },
+	{  0x3,  0x5, 1333, 667, 667 },
+	{  0x4,  0x5, 1500, 750, 750 },
+	{  0x4,  0x9, 1500, 750, 500 },
+	{  0xb,  0x9, 1600, 800, 533 },
+	{  0xb,  0xa, 1600, 800, 640 },
+	{  0xb,  0x5, 1600, 800, 800 },
+	{ 0xff, 0xff,    0,   0,   0 }	/* 0xff marks end of array */
+};
+#endif
+
+void get_sar_freq(struct sar_freq_modes *sar_freq)
+{
+	u32 val;
+	u32 freq;
+	int i;
+
+#if defined(CONFIG_ARMADA_375) || defined(CONFIG_ARMADA_MSYS)
+	val = readl(CONFIG_SAR2_REG);	/* SAR - Sample At Reset */
+#else
+	val = readl(CONFIG_SAR_REG);	/* SAR - Sample At Reset */
+#endif
+	freq = (val & SAR_CPU_FREQ_MASK) >> SAR_CPU_FREQ_OFFS;
+#if defined(SAR2_CPU_FREQ_MASK)
+	/*
+	 * Shift CPU0 clock frequency select bit from SAR2 register
+	 * into correct position
+	 */
+	freq |= ((readl(CONFIG_SAR2_REG) & SAR2_CPU_FREQ_MASK)
+		 >> SAR2_CPU_FREQ_OFFS) << 3;
+#endif
+	for (i = 0; sar_freq_tab[i].val != 0xff; i++) {
+		if (sar_freq_tab[i].val == freq) {
+#if defined(CONFIG_ARMADA_375) || defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_MSYS)
+			*sar_freq = sar_freq_tab[i];
+			return;
+#else
+			int k;
+			u8 ffc;
+
+			ffc = (val & SAR_FFC_FREQ_MASK) >>
+				SAR_FFC_FREQ_OFFS;
+			for (k = i; sar_freq_tab[k].ffc != 0xff; k++) {
+				if (sar_freq_tab[k].ffc == ffc) {
+					*sar_freq = sar_freq_tab[k];
+					return;
+				}
+			}
+			i = k;
+#endif
+		}
+	}
+
+	/* SAR value not found, return 0 for frequencies */
+	*sar_freq = sar_freq_tab[i - 1];
+}
+
+int print_cpuinfo(void)
+{
+	u16 devid = (readl(MVEBU_REG_PCIE_DEVID) >> 16) & 0xffff;
+	u8 revid = readl(MVEBU_REG_PCIE_REVID) & 0xff;
+	struct sar_freq_modes sar_freq;
+
+	puts("SoC:   ");
+
+	switch (devid) {
+	case SOC_MV78230_ID:
+		puts("MV78230-");
+		break;
+	case SOC_MV78260_ID:
+		puts("MV78260-");
+		break;
+	case SOC_MV78460_ID:
+		puts("MV78460-");
+		break;
+	case SOC_88F6720_ID:
+		puts("MV88F6720-");
+		break;
+	case SOC_88F6810_ID:
+		puts("MV88F6810-");
+		break;
+	case SOC_88F6820_ID:
+		puts("MV88F6820-");
+		break;
+	case SOC_88F6828_ID:
+		puts("MV88F6828-");
+		break;
+	case SOC_98DX3236_ID:
+		puts("98DX3236-");
+		break;
+	case SOC_98DX3336_ID:
+		puts("98DX3336-");
+		break;
+	case SOC_98DX4251_ID:
+		puts("98DX4251-");
+		break;
+	default:
+		puts("Unknown-");
+		break;
+	}
+
+	if (mvebu_soc_family() == MVEBU_SOC_AXP) {
+		switch (revid) {
+		case 1:
+			puts("A0");
+			break;
+		case 2:
+			puts("B0");
+			break;
+		default:
+			printf("?? (%x)", revid);
+			break;
+		}
+	}
+
+	if (mvebu_soc_family() == MVEBU_SOC_A375) {
+		switch (revid) {
+		case MV_88F67XX_A0_ID:
+			puts("A0");
+			break;
+		default:
+			printf("?? (%x)", revid);
+			break;
+		}
+	}
+
+	if (mvebu_soc_family() == MVEBU_SOC_A38X) {
+		switch (revid) {
+		case MV_88F68XX_Z1_ID:
+			puts("Z1");
+			break;
+		case MV_88F68XX_A0_ID:
+			puts("A0");
+			break;
+		case MV_88F68XX_B0_ID:
+			puts("B0");
+			break;
+		default:
+			printf("?? (%x)", revid);
+			break;
+		}
+	}
+
+	if (mvebu_soc_family() == MVEBU_SOC_MSYS) {
+		switch (revid) {
+		case 3:
+			puts("A0");
+			break;
+		case 4:
+			puts("A1");
+			break;
+		default:
+			printf("?? (%x)", revid);
+			break;
+		}
+	}
+
+	get_sar_freq(&sar_freq);
+	printf(" at %d MHz\n", sar_freq.p_clk);
+
+	return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+/*
+ * This function initialize Controller DRAM Fastpath windows.
+ * It takes the CS size information from the 0x1500 scratch registers
+ * and sets the correct windows sizes and base addresses accordingly.
+ *
+ * These values are set in the scratch registers by the Marvell
+ * DDR3 training code, which is executed by the SPL before the
+ * main payload (U-Boot) is executed.
+ */
+static void update_sdram_window_sizes(void)
+{
+	u64 base = 0;
+	u32 size, temp;
+	int i;
+
+	for (i = 0; i < SDRAM_MAX_CS; i++) {
+		size = readl((MVEBU_SDRAM_SCRATCH + (i * 8))) & SDRAM_ADDR_MASK;
+		if (size != 0) {
+			size |= ~(SDRAM_ADDR_MASK);
+
+			/* Set Base Address */
+			temp = (base & 0xFF000000ll) | ((base >> 32) & 0xF);
+			writel(temp, MVEBU_SDRAM_BASE + DDR_BASE_CS_OFF(i));
+
+			/*
+			 * Check if out of max window size and resize
+			 * the window
+			 */
+			temp = (readl(MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i)) &
+				~(SDRAM_ADDR_MASK)) | 1;
+			temp |= (size & SDRAM_ADDR_MASK);
+			writel(temp, MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i));
+
+			base += ((u64)size + 1);
+		} else {
+			/*
+			 * Disable window if not used, otherwise this
+			 * leads to overlapping enabled windows with
+			 * pretty strange results
+			 */
+			clrbits_le32(MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i), 1);
+		}
+	}
+}
+
+void mmu_disable(void)
+{
+	asm volatile(
+		"mrc p15, 0, r0, c1, c0, 0\n"
+		"bic r0, #1\n"
+		"mcr p15, 0, r0, c1, c0, 0\n");
+}
+
+#ifdef CONFIG_ARCH_CPU_INIT
+static void set_cbar(u32 addr)
+{
+	asm("mcr p15, 4, %0, c15, c0" : : "r" (addr));
+}
+
+#define MV_USB_PHY_BASE			(MVEBU_AXP_USB_BASE + 0x800)
+#define MV_USB_PHY_PLL_REG(reg)		(MV_USB_PHY_BASE | (((reg) & 0xF) << 2))
+#define MV_USB_X3_BASE(addr)		(MVEBU_AXP_USB_BASE | BIT(11) | \
+					 (((addr) & 0xF) << 6))
+#define MV_USB_X3_PHY_CHANNEL(dev, reg)	(MV_USB_X3_BASE((dev) + 1) |	\
+					 (((reg) & 0xF) << 2))
+
+static void setup_usb_phys(void)
+{
+	int dev;
+
+	/*
+	 * USB PLL init
+	 */
+
+	/* Setup PLL frequency */
+	/* USB REF frequency = 25 MHz */
+	clrsetbits_le32(MV_USB_PHY_PLL_REG(1), 0x3ff, 0x605);
+
+	/* Power up PLL and PHY channel */
+	setbits_le32(MV_USB_PHY_PLL_REG(2), BIT(9));
+
+	/* Assert VCOCAL_START */
+	setbits_le32(MV_USB_PHY_PLL_REG(1), BIT(21));
+
+	mdelay(1);
+
+	/*
+	 * USB PHY init (change from defaults) specific for 40nm (78X30 78X60)
+	 */
+
+	for (dev = 0; dev < 3; dev++) {
+		setbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 3), BIT(15));
+
+		/* Assert REG_RCAL_START in channel REG 1 */
+		setbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 1), BIT(12));
+		udelay(40);
+		clrbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 1), BIT(12));
+	}
+}
+
+/*
+ * This function is not called from the SPL U-Boot version
+ */
+int arch_cpu_init(void)
+{
+	struct pl310_regs *const pl310 =
+		(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+
+	/*
+	 * Only with disabled MMU its possible to switch the base
+	 * register address on Armada 38x. Without this the SDRAM
+	 * located at >= 0x4000.0000 is also not accessible, as its
+	 * still locked to cache.
+	 */
+	mmu_disable();
+
+	/* Linux expects the internal registers to be at 0xf1000000 */
+	writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG);
+	set_cbar(SOC_REGS_PHY_BASE + 0xC000);
+
+	/*
+	 * From this stage on, the SoC detection is working. As we have
+	 * configured the internal register base to the value used
+	 * in the macros / defines in the U-Boot header (soc.h).
+	 */
+
+	if (mvebu_soc_family() == MVEBU_SOC_A38X) {
+		/*
+		 * To fully release / unlock this area from cache, we need
+		 * to flush all caches and disable the L2 cache.
+		 */
+		icache_disable();
+		dcache_disable();
+		clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+	}
+
+	/*
+	 * We need to call mvebu_mbus_probe() before calling
+	 * update_sdram_window_sizes() as it disables all previously
+	 * configured mbus windows and then configures them as
+	 * required for U-Boot. Calling update_sdram_window_sizes()
+	 * without this configuration will not work, as the internal
+	 * registers can't be accessed reliably because of potenial
+	 * double mapping.
+	 * After updating the SDRAM access windows we need to call
+	 * mvebu_mbus_probe() again, as this now correctly configures
+	 * the SDRAM areas that are later used by the MVEBU drivers
+	 * (e.g. USB, NETA).
+	 */
+
+	/*
+	 * First disable all windows
+	 */
+	mvebu_mbus_probe(NULL, 0);
+
+	if (mvebu_soc_family() == MVEBU_SOC_AXP) {
+		/*
+		 * Now the SDRAM access windows can be reconfigured using
+		 * the information in the SDRAM scratch pad registers
+		 */
+		update_sdram_window_sizes();
+	}
+
+	/*
+	 * Finally the mbus windows can be configured with the
+	 * updated SDRAM sizes
+	 */
+	mvebu_mbus_probe(windows, ARRAY_SIZE(windows));
+
+	if (mvebu_soc_family() == MVEBU_SOC_AXP) {
+		/* Enable GBE0, GBE1, LCD and NFC PUP */
+		clrsetbits_le32(ARMADA_XP_PUP_ENABLE, 0,
+				GE0_PUP_EN | GE1_PUP_EN | LCD_PUP_EN |
+				NAND_PUP_EN | SPI_PUP_EN);
+
+		/* Configure USB PLL and PHYs on AXP */
+		setup_usb_phys();
+	}
+
+	/* Enable NAND and NAND arbiter */
+	clrsetbits_le32(MVEBU_SOC_DEV_MUX_REG, 0, NAND_EN | NAND_ARBITER_EN);
+
+	/* Disable MBUS error propagation */
+	clrsetbits_le32(SOC_COHERENCY_FABRIC_CTRL_REG, MBUS_ERR_PROP_EN, 0);
+
+	return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
+u32 mvebu_get_nand_clock(void)
+{
+	u32 reg;
+
+	if (mvebu_soc_family() == MVEBU_SOC_A38X)
+		reg = MVEBU_DFX_DIV_CLK_CTRL(1);
+	else if (mvebu_soc_family() == MVEBU_SOC_MSYS)
+		reg = MVEBU_DFX_DIV_CLK_CTRL(8);
+	else
+		reg = MVEBU_CORE_DIV_CLK_CTRL(1);
+
+	return CONFIG_SYS_MVEBU_PLL_CLOCK /
+		((readl(reg) &
+		  NAND_ECC_DIVCKL_RATIO_MASK) >> NAND_ECC_DIVCKL_RATIO_OFFS);
+}
+
+/*
+ * SOC specific misc init
+ */
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+	/* Nothing yet, perhaps we need something here later */
+	return 0;
+}
+#endif /* CONFIG_ARCH_MISC_INIT */
+
+#if defined(CONFIG_MMC_SDHCI_MV) && !defined(CONFIG_DM_MMC)
+int board_mmc_init(struct bd_info *bis)
+{
+	mv_sdh_init(MVEBU_SDIO_BASE, 0, 0,
+		    SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_WAIT_SEND_CMD);
+
+	return 0;
+}
+#endif
+
+#define AHCI_VENDOR_SPECIFIC_0_ADDR	0xa0
+#define AHCI_VENDOR_SPECIFIC_0_DATA	0xa4
+
+#define AHCI_WINDOW_CTRL(win)		(0x60 + ((win) << 4))
+#define AHCI_WINDOW_BASE(win)		(0x64 + ((win) << 4))
+#define AHCI_WINDOW_SIZE(win)		(0x68 + ((win) << 4))
+
+static void ahci_mvebu_mbus_config(void __iomem *base)
+{
+	const struct mbus_dram_target_info *dram;
+	int i;
+
+	/* mbus is not initialized in SPL; keep the ROM settings */
+	if (IS_ENABLED(CONFIG_SPL_BUILD))
+		return;
+
+	dram = mvebu_mbus_dram_info();
+
+	for (i = 0; i < 4; i++) {
+		writel(0, base + AHCI_WINDOW_CTRL(i));
+		writel(0, base + AHCI_WINDOW_BASE(i));
+		writel(0, base + AHCI_WINDOW_SIZE(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		writel((cs->mbus_attr << 8) |
+		       (dram->mbus_dram_target_id << 4) | 1,
+		       base + AHCI_WINDOW_CTRL(i));
+		writel(cs->base >> 16, base + AHCI_WINDOW_BASE(i));
+		writel(((cs->size - 1) & 0xffff0000),
+		       base + AHCI_WINDOW_SIZE(i));
+	}
+}
+
+static void ahci_mvebu_regret_option(void __iomem *base)
+{
+	/*
+	 * Enable the regret bit to allow the SATA unit to regret a
+	 * request that didn't receive an acknowlegde and avoid a
+	 * deadlock
+	 */
+	writel(0x4, base + AHCI_VENDOR_SPECIFIC_0_ADDR);
+	writel(0x80, base + AHCI_VENDOR_SPECIFIC_0_DATA);
+}
+
+int board_ahci_enable(void)
+{
+	ahci_mvebu_mbus_config((void __iomem *)MVEBU_SATA0_BASE);
+	ahci_mvebu_regret_option((void __iomem *)MVEBU_SATA0_BASE);
+
+	return 0;
+}
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+void scsi_init(void)
+{
+	printf("MVEBU SATA INIT\n");
+	board_ahci_enable();
+	ahci_init((void __iomem *)MVEBU_SATA0_BASE);
+}
+#endif
+
+#ifdef CONFIG_USB_XHCI_MVEBU
+#define USB3_MAX_WINDOWS        4
+#define USB3_WIN_CTRL(w)        (0x0 + ((w) * 8))
+#define USB3_WIN_BASE(w)        (0x4 + ((w) * 8))
+
+static void xhci_mvebu_mbus_config(void __iomem *base,
+			const struct mbus_dram_target_info *dram)
+{
+	int i;
+
+	for (i = 0; i < USB3_MAX_WINDOWS; i++) {
+		writel(0, base + USB3_WIN_CTRL(i));
+		writel(0, base + USB3_WIN_BASE(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		/* Write size, attributes and target id to control register */
+		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+			(dram->mbus_dram_target_id << 4) | 1,
+			base + USB3_WIN_CTRL(i));
+
+		/* Write base address to base register */
+		writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(i));
+	}
+}
+
+int board_xhci_enable(fdt_addr_t base)
+{
+	const struct mbus_dram_target_info *dram;
+
+	printf("MVEBU XHCI INIT controller @ 0x%lx\n", base);
+
+	dram = mvebu_mbus_dram_info();
+	xhci_mvebu_mbus_config((void __iomem *)base, dram);
+
+	return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+	/* Avoid problem with e.g. neta ethernet driver */
+	invalidate_dcache_all();
+
+	/*
+	 * Armada 375 still has some problems with d-cache enabled in the
+	 * ethernet driver (mvpp2). So lets keep the d-cache disabled
+	 * until this is solved.
+	 */
+	if (mvebu_soc_family() != MVEBU_SOC_A375) {
+		/* Enable D-cache. I-cache is already enabled in start.S */
+		dcache_enable();
+	}
+}
+
+void v7_outer_cache_enable(void)
+{
+	if (mvebu_soc_family() == MVEBU_SOC_AXP) {
+		struct pl310_regs *const pl310 =
+			(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+		u32 u;
+
+		/* The L2 cache is already disabled at this point */
+
+		/*
+		 * For Aurora cache in no outer mode, enable via the CP15
+		 * coprocessor broadcasting of cache commands to L2.
+		 */
+		asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u));
+		u |= BIT(8);		/* Set the FW bit */
+		asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u));
+
+		isb();
+
+		/* Enable the L2 cache */
+		setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+	}
+}
+
+void v7_outer_cache_disable(void)
+{
+	struct pl310_regs *const pl310 =
+		(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/dram.c b/roms/u-boot/arch/arm/mach-mvebu/dram.c
new file mode 100644
index 000000000..349e0cc4c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/dram.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#if defined(CONFIG_ARCH_MVEBU)
+/* Use common XOR definitions for A3x and AXP */
+#include "../../../drivers/ddr/marvell/axp/xor.h"
+#include "../../../drivers/ddr/marvell/axp/xor_regs.h"
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sdram_bank {
+	u32	win_bar;
+	u32	win_sz;
+};
+
+struct sdram_addr_dec {
+	struct sdram_bank sdram_bank[4];
+};
+
+#define REG_CPUCS_WIN_ENABLE		(1 << 0)
+#define REG_CPUCS_WIN_WR_PROTECT	(1 << 1)
+#define REG_CPUCS_WIN_WIN0_CS(x)	(((x) & 0x3) << 2)
+#define REG_CPUCS_WIN_SIZE(x)		(((x) & 0xff) << 24)
+
+#ifndef MVEBU_SDRAM_SIZE_MAX
+#define MVEBU_SDRAM_SIZE_MAX		0xc0000000
+#endif
+
+#define SCRUB_MAGIC		0xbeefdead
+
+#define SCRB_XOR_UNIT		0
+#define SCRB_XOR_CHAN		1
+#define SCRB_XOR_WIN		0
+
+#define XEBARX_BASE_OFFS	16
+
+/*
+ * mvebu_sdram_bar - reads SDRAM Base Address Register
+ */
+u32 mvebu_sdram_bar(enum memory_bank bank)
+{
+	struct sdram_addr_dec *base =
+		(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
+	u32 result = 0;
+	u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);
+
+	if ((!enable) || (bank > BANK3))
+		return 0;
+
+	result = readl(&base->sdram_bank[bank].win_bar);
+	return result;
+}
+
+/*
+ * mvebu_sdram_bs_set - writes SDRAM Bank size
+ */
+static void mvebu_sdram_bs_set(enum memory_bank bank, u32 size)
+{
+	struct sdram_addr_dec *base =
+		(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
+	/* Read current register value */
+	u32 reg = readl(&base->sdram_bank[bank].win_sz);
+
+	/* Clear window size */
+	reg &= ~REG_CPUCS_WIN_SIZE(0xFF);
+
+	/* Set new window size */
+	reg |= REG_CPUCS_WIN_SIZE((size - 1) >> 24);
+
+	writel(reg, &base->sdram_bank[bank].win_sz);
+}
+
+/*
+ * mvebu_sdram_bs - reads SDRAM Bank size
+ */
+u32 mvebu_sdram_bs(enum memory_bank bank)
+{
+	struct sdram_addr_dec *base =
+		(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
+	u32 result = 0;
+	u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);
+
+	if ((!enable) || (bank > BANK3))
+		return 0;
+	result = 0xff000000 & readl(&base->sdram_bank[bank].win_sz);
+	result += 0x01000000;
+	return result;
+}
+
+void mvebu_sdram_size_adjust(enum memory_bank bank)
+{
+	u32 size;
+
+	/* probe currently equipped RAM size */
+	size = get_ram_size((void *)mvebu_sdram_bar(bank),
+			    mvebu_sdram_bs(bank));
+
+	/* adjust SDRAM window size accordingly */
+	mvebu_sdram_bs_set(bank, size);
+}
+
+#if defined(CONFIG_ARCH_MVEBU)
+static u32 xor_ctrl_save;
+static u32 xor_base_save;
+static u32 xor_mask_save;
+
+static void mv_xor_init2(u32 cs)
+{
+	u32 reg, base, size, base2;
+	u32 bank_attr[4] = { 0xe00, 0xd00, 0xb00, 0x700 };
+
+	xor_ctrl_save = reg_read(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT,
+						     SCRB_XOR_CHAN));
+	xor_base_save = reg_read(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT,
+						   SCRB_XOR_WIN));
+	xor_mask_save = reg_read(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT,
+						   SCRB_XOR_WIN));
+
+	/* Enable Window x for each CS */
+	reg = 0x1;
+	reg |= (0x3 << 16);
+	reg_write(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT, SCRB_XOR_CHAN), reg);
+
+	base = 0;
+	size = mvebu_sdram_bs(cs) - 1;
+	if (size) {
+		base2 = ((base / (64 << 10)) << XEBARX_BASE_OFFS) |
+			bank_attr[cs];
+		reg_write(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
+			  base2);
+
+		base += size + 1;
+		size = (size / (64 << 10)) << 16;
+		/* Window x - size - 256 MB */
+		reg_write(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN), size);
+	}
+
+	mv_xor_hal_init(0);
+
+	return;
+}
+
+static void mv_xor_finish2(void)
+{
+	reg_write(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT, SCRB_XOR_CHAN),
+		  xor_ctrl_save);
+	reg_write(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
+		  xor_base_save);
+	reg_write(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
+		  xor_mask_save);
+}
+
+static void dram_ecc_scrubbing(void)
+{
+	int cs;
+	u32 size, temp;
+	u32 total_mem = 0;
+	u64 total;
+	u32 start_addr;
+
+	/*
+	 * The DDR training code from the bin_hdr / SPL already
+	 * scrubbed the DDR till 0x1000000. And the main U-Boot
+	 * is loaded to an address < 0x1000000. So we need to
+	 * skip this range to not re-scrub this area again.
+	 */
+	temp = reg_read(REG_SDRAM_CONFIG_ADDR);
+	temp |= (1 << REG_SDRAM_CONFIG_IERR_OFFS);
+	reg_write(REG_SDRAM_CONFIG_ADDR, temp);
+
+	for (cs = 0; cs < CONFIG_NR_DRAM_BANKS; cs++) {
+		size = mvebu_sdram_bs(cs);
+		if (size == 0)
+			continue;
+
+		total = (u64)size;
+		total_mem += (u32)(total / (1 << 30));
+		start_addr = 0;
+		mv_xor_init2(cs);
+
+		/* Skip first 16 MiB */
+		if (0 == cs) {
+			start_addr = 0x1000000;
+			size -= start_addr;
+		}
+
+		mv_xor_mem_init(SCRB_XOR_CHAN, start_addr, size - 1,
+				SCRUB_MAGIC, SCRUB_MAGIC);
+
+		/* Wait for previous transfer completion */
+		while (mv_xor_state_get(SCRB_XOR_CHAN) != MV_IDLE)
+			;
+
+		mv_xor_finish2();
+	}
+
+	temp = reg_read(REG_SDRAM_CONFIG_ADDR);
+	temp &= ~(1 << REG_SDRAM_CONFIG_IERR_OFFS);
+	reg_write(REG_SDRAM_CONFIG_ADDR, temp);
+}
+
+static int ecc_enabled(void)
+{
+	if (reg_read(REG_SDRAM_CONFIG_ADDR) & (1 << REG_SDRAM_CONFIG_ECC_OFFS))
+		return 1;
+
+	return 0;
+}
+
+/* Return the width of the DRAM bus, or 0 for unknown. */
+static int bus_width(void)
+{
+	int full_width = 0;
+
+	if (reg_read(REG_SDRAM_CONFIG_ADDR) & (1 << REG_SDRAM_CONFIG_WIDTH_OFFS))
+		full_width = 1;
+
+	switch (mvebu_soc_family()) {
+	case MVEBU_SOC_AXP:
+	    return full_width ? 64 : 32;
+	    break;
+	case MVEBU_SOC_A375:
+	case MVEBU_SOC_A38X:
+	case MVEBU_SOC_MSYS:
+	    return full_width ? 32 : 16;
+	default:
+	    return 0;
+	}
+}
+
+static int cycle_mode(void)
+{
+	int val = reg_read(REG_DUNIT_CTRL_LOW_ADDR);
+
+	return (val >> REG_DUNIT_CTRL_LOW_2T_OFFS) & REG_DUNIT_CTRL_LOW_2T_MASK;
+}
+
+#else
+static void dram_ecc_scrubbing(void)
+{
+}
+
+static int ecc_enabled(void)
+{
+	return 0;
+}
+#endif
+
+int dram_init(void)
+{
+	u64 size = 0;
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		/*
+		 * It is assumed that all memory banks are consecutive
+		 * and without gaps.
+		 * If the gap is found, ram_size will be reported for
+		 * consecutive memory only
+		 */
+		if (mvebu_sdram_bar(i) != size)
+			break;
+
+		/*
+		 * Don't report more than 3GiB of SDRAM, otherwise there is no
+		 * address space left for the internal registers etc.
+		 */
+		size += mvebu_sdram_bs(i);
+		if (size > MVEBU_SDRAM_SIZE_MAX)
+			size = MVEBU_SDRAM_SIZE_MAX;
+	}
+
+	if (ecc_enabled())
+		dram_ecc_scrubbing();
+
+	gd->ram_size = size;
+
+	return 0;
+}
+
+/*
+ * If this function is not defined here,
+ * board.c alters dram bank zero configuration defined above.
+ */
+int dram_init_banksize(void)
+{
+	u64 size = 0;
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		gd->bd->bi_dram[i].start = mvebu_sdram_bar(i);
+		gd->bd->bi_dram[i].size = mvebu_sdram_bs(i);
+
+		/* Clip the banksize to 1GiB if it exceeds the max size */
+		size += gd->bd->bi_dram[i].size;
+		if (size > MVEBU_SDRAM_SIZE_MAX)
+			mvebu_sdram_bs_set(i, 0x40000000);
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_ARCH_MVEBU)
+void board_add_ram_info(int use_default)
+{
+	struct sar_freq_modes sar_freq;
+	int mode;
+	int width;
+
+	get_sar_freq(&sar_freq);
+	printf(" (%d MHz, ", sar_freq.d_clk);
+
+	width = bus_width();
+	if (width)
+		printf("%d-bit, ", width);
+
+	mode = cycle_mode();
+	/* Mode 0 = Single cycle
+	 * Mode 1 = Two cycles   (2T)
+	 * Mode 2 = Three cycles (3T)
+	 */
+	if (mode == 1)
+		printf("2T, ");
+	if (mode == 2)
+		printf("3T, ");
+
+	if (ecc_enabled())
+		printf("ECC");
+	else
+		printf("ECC not");
+	printf(" enabled)");
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-mvebu/efuse.c b/roms/u-boot/arch/arm/mach-mvebu/efuse.c
new file mode 100644
index 000000000..c79eee98f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/efuse.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2016 Reinhard Pfau <reinhard.pfau@gdsys.cc>
+ */
+
+#include <config.h>
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/efuse.h>
+#include <asm/arch/soc.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/mbus.h>
+
+#if defined(CONFIG_MVEBU_EFUSE_FAKE)
+#define DRY_RUN
+#else
+#undef DRY_RUN
+#endif
+
+#define MBUS_EFUSE_BASE 0xF6000000
+#define MBUS_EFUSE_SIZE BIT(20)
+
+#define MVEBU_EFUSE_CONTROL (MVEBU_REGISTER(0xE4008))
+
+enum {
+	MVEBU_EFUSE_CTRL_PROGRAM_ENABLE = (1 << 31),
+};
+
+struct mvebu_hd_efuse {
+	u32 bits_31_0;
+	u32 bits_63_32;
+	u32 bit64;
+	u32 reserved0;
+};
+
+#ifndef DRY_RUN
+static struct mvebu_hd_efuse *efuses =
+	(struct mvebu_hd_efuse *)(MBUS_EFUSE_BASE + 0xF9000);
+#else
+static struct mvebu_hd_efuse efuses[EFUSE_LINE_MAX + 1];
+#endif
+
+static int efuse_initialised;
+
+static struct mvebu_hd_efuse *get_efuse_line(int nr)
+{
+	if (nr < 0 || nr > 63 || !efuse_initialised)
+		return NULL;
+
+	return efuses + nr;
+}
+
+static void enable_efuse_program(void)
+{
+#ifndef DRY_RUN
+	setbits_le32(MVEBU_EFUSE_CONTROL, MVEBU_EFUSE_CTRL_PROGRAM_ENABLE);
+#endif
+}
+
+static void disable_efuse_program(void)
+{
+#ifndef DRY_RUN
+	clrbits_le32(MVEBU_EFUSE_CONTROL, MVEBU_EFUSE_CTRL_PROGRAM_ENABLE);
+#endif
+}
+
+static int do_prog_efuse(struct mvebu_hd_efuse *efuse,
+			 struct efuse_val *new_val, u32 mask0, u32 mask1)
+{
+	struct efuse_val val;
+
+	val.dwords.d[0] = readl(&efuse->bits_31_0);
+	val.dwords.d[1] = readl(&efuse->bits_63_32);
+	val.lock = readl(&efuse->bit64);
+
+	if (val.lock & 1)
+		return -EPERM;
+
+	val.dwords.d[0] |= (new_val->dwords.d[0] & mask0);
+	val.dwords.d[1] |= (new_val->dwords.d[1] & mask1);
+	val.lock |= new_val->lock;
+
+	writel(val.dwords.d[0], &efuse->bits_31_0);
+	mdelay(1);
+	writel(val.dwords.d[1], &efuse->bits_63_32);
+	mdelay(1);
+	writel(val.lock, &efuse->bit64);
+	mdelay(5);
+
+	return 0;
+}
+
+static int prog_efuse(int nr, struct efuse_val *new_val, u32 mask0, u32 mask1)
+{
+	struct mvebu_hd_efuse *efuse;
+	int res = 0;
+
+	res = mvebu_efuse_init_hw();
+	if (res)
+		return res;
+
+	efuse = get_efuse_line(nr);
+	if (!efuse)
+		return -ENODEV;
+
+	if (!new_val)
+		return -EINVAL;
+
+	/* only write a fuse line with lock bit */
+	if (!new_val->lock)
+		return -EINVAL;
+
+	/* according to specs ECC protection bits must be 0 on write */
+	if (new_val->bytes.d[7] & 0xFE)
+		return -EINVAL;
+
+	if (!new_val->dwords.d[0] && !new_val->dwords.d[1] && (mask0 | mask1))
+		return 0;
+
+	enable_efuse_program();
+
+	res = do_prog_efuse(efuse, new_val, mask0, mask1);
+
+	disable_efuse_program();
+
+	return res;
+}
+
+int mvebu_efuse_init_hw(void)
+{
+	int ret;
+
+	if (efuse_initialised)
+		return 0;
+
+	ret = mvebu_mbus_add_window_by_id(
+		CPU_TARGET_SATA23_DFX, 0xA, MBUS_EFUSE_BASE, MBUS_EFUSE_SIZE);
+
+	if (ret)
+		return ret;
+
+	efuse_initialised = 1;
+
+	return 0;
+}
+
+int mvebu_read_efuse(int nr, struct efuse_val *val)
+{
+	struct mvebu_hd_efuse *efuse;
+	int res;
+
+	res = mvebu_efuse_init_hw();
+	if (res)
+		return res;
+
+	efuse = get_efuse_line(nr);
+	if (!efuse)
+		return -ENODEV;
+
+	if (!val)
+		return -EINVAL;
+
+	val->dwords.d[0] = readl(&efuse->bits_31_0);
+	val->dwords.d[1] = readl(&efuse->bits_63_32);
+	val->lock = readl(&efuse->bit64);
+	return 0;
+}
+
+int mvebu_write_efuse(int nr, struct efuse_val *val)
+{
+	return prog_efuse(nr, val, ~0, ~0);
+}
+
+int mvebu_lock_efuse(int nr)
+{
+	struct efuse_val val = {
+		.lock = 1,
+	};
+
+	return prog_efuse(nr, &val, 0, 0);
+}
+
+/*
+ * wrapper funcs providing the fuse API
+ *
+ * we use the following mapping:
+ *   "bank" ->	eFuse line
+ *   "word" ->	0: bits 0-31
+ *		1: bits 32-63
+ *		2: bit 64 (lock)
+ */
+
+static struct efuse_val prog_val;
+static int valid_prog_words;
+
+int fuse_read(u32 bank, u32 word, u32 *val)
+{
+	struct efuse_val fuse_line;
+	int res;
+
+	if (bank < EFUSE_LINE_MIN || bank > EFUSE_LINE_MAX || word > 2)
+		return -EINVAL;
+
+	res = mvebu_read_efuse(bank, &fuse_line);
+	if (res)
+		return res;
+
+	if (word < 2)
+		*val = fuse_line.dwords.d[word];
+	else
+		*val = fuse_line.lock;
+
+	return res;
+}
+
+int fuse_sense(u32 bank, u32 word, u32 *val)
+{
+	/* not supported */
+	return -ENOSYS;
+}
+
+int fuse_prog(u32 bank, u32 word, u32 val)
+{
+	int res = 0;
+
+	/*
+	 * NOTE: Fuse line should be written as whole.
+	 * So how can we do that with this API?
+	 * For now: remember values for word == 0 and word == 1 and write the
+	 * whole line when word == 2.
+	 * This implies that we always require all 3 fuse prog cmds (one for
+	 * for each word) to write a single fuse line.
+	 * Exception is a single write to word 2 which will lock the fuse line.
+	 *
+	 * Hope that will be OK.
+	 */
+
+	if (bank < EFUSE_LINE_MIN || bank > EFUSE_LINE_MAX || word > 2)
+		return -EINVAL;
+
+	if (word < 2) {
+		prog_val.dwords.d[word] = val;
+		valid_prog_words |= (1 << word);
+	} else if ((valid_prog_words & 3) == 0 && val) {
+		res = mvebu_lock_efuse(bank);
+		valid_prog_words = 0;
+	} else if ((valid_prog_words & 3) != 3 || !val) {
+		res = -EINVAL;
+	} else {
+		prog_val.lock = val != 0;
+		res = mvebu_write_efuse(bank, &prog_val);
+		valid_prog_words = 0;
+	}
+
+	return res;
+}
+
+int fuse_override(u32 bank, u32 word, u32 val)
+{
+	/* not supported */
+	return -ENOSYS;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/gpio.c b/roms/u-boot/arch/arm/mach-mvebu/gpio.c
new file mode 100644
index 000000000..1d1e3df8b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/gpio.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+/*
+ * mvebu_config_gpio - GPIO configuration
+ */
+void mvebu_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val,
+		       u32 gpp0_oe, u32 gpp1_oe)
+{
+	struct kwgpio_registers *gpio0reg =
+		(struct kwgpio_registers *)MVEBU_GPIO0_BASE;
+	struct kwgpio_registers *gpio1reg =
+		(struct kwgpio_registers *)MVEBU_GPIO1_BASE;
+
+	/* Init GPIOS to default values as per board requirement */
+	writel(gpp0_oe_val, &gpio0reg->dout);
+	writel(gpp1_oe_val, &gpio1reg->dout);
+	writel(gpp0_oe, &gpio0reg->oe);
+	writel(gpp1_oe, &gpio1reg->oe);
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/config.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/config.h
new file mode 100644
index 000000000..02a5b8801
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/config.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Lei Wen <leiwen@marvell.com>
+ */
+
+/*
+ * This file should be included in board config header file.
+ *
+ * It supports common definitions for MVEBU platforms
+ */
+
+#ifndef _MVEBU_CONFIG_H
+#define _MVEBU_CONFIG_H
+
+#include <asm/arch/soc.h>
+
+#if defined(CONFIG_ARMADA_XP) || defined(CONFIG_ARMADA_375) \
+	|| defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_MSYS)
+/*
+ * Set this for the common xor register definitions needed in dram.c
+ * for A38x as well here.
+ */
+#define MV88F78X60 /* for the DDR training bin_hdr code */
+#endif
+
+#define CONFIG_SYS_L2_PL310
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+#endif
+
+/*
+ * By default the generated mvebu kwbimage.cfg is used
+ * If for some board, different configuration file need to be used,
+ * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
+ */
+#ifndef CONFIG_SYS_KWD_CONFIG
+#define	CONFIG_SYS_KWD_CONFIG	arch/arm/mach-mvebu/kwbimage.cfg
+#endif /* CONFIG_SYS_KWD_CONFIG */
+
+/* end of 16M scrubbed by training in bootrom */
+#define CONFIG_SYS_INIT_SP_ADDR		0x00FF0000
+
+#define MV_UART_CONSOLE_BASE		MVEBU_UART0_BASE
+
+/* Needed for SPI NOR booting in SPL */
+#define CONFIG_DM_SEQ_ALIAS		1
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_ARP_TIMEOUT	200
+#define CONFIG_NET_RETRY_COUNT	50
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * I2C related stuff
+ */
+#ifdef CONFIG_CMD_I2C
+#ifndef CONFIG_SYS_I2C_SOFT
+#define CONFIG_I2C_MVTWSI
+#endif
+#define CONFIG_SYS_I2C_SLAVE		0x0
+#define CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+/* Use common timer */
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+#define CONFIG_SYS_TIMER_COUNTER	(MVEBU_TIMER_BASE + 0x14)
+#define CONFIG_SYS_TIMER_RATE		25000000
+
+#endif /* __MVEBU_CONFIG_H */
diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/cpu.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/cpu.h
new file mode 100644
index 000000000..52473ade7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef _MVEBU_CPU_H
+#define _MVEBU_CPU_H
+
+#include <asm/system.h>
+
+#ifndef __ASSEMBLY__
+
+#define MVEBU_REG_PCIE_DEVID		(MVEBU_REG_PCIE_BASE + 0x00)
+#define MVEBU_REG_PCIE_REVID		(MVEBU_REG_PCIE_BASE + 0x08)
+
+enum memory_bank {
+	BANK0,
+	BANK1,
+	BANK2,
+	BANK3
+};
+
+enum cpu_winen {
+	CPU_WIN_DISABLE,
+	CPU_WIN_ENABLE
+};
+
+enum cpu_target {
+	CPU_TARGET_DRAM = 0x0,
+	CPU_TARGET_DEVICEBUS_BOOTROM_SPI = 0x1,
+	CPU_TARGET_ETH23 = 0x3,
+	CPU_TARGET_PCIE02 = 0x4,
+	CPU_TARGET_ETH01 = 0x7,
+	CPU_TARGET_PCIE13 = 0x8,
+	CPU_TARGET_DFX = 0x8,
+	CPU_TARGET_SASRAM = 0x9,
+	CPU_TARGET_SATA01 = 0xa, /* A38X */
+	CPU_TARGET_NAND = 0xd,
+	CPU_TARGET_SATA23_DFX = 0xe, /* A38X */
+};
+
+enum cpu_attrib {
+	CPU_ATTR_SASRAM = 0x01,
+	CPU_ATTR_DRAM_CS0 = 0x0e,
+	CPU_ATTR_DRAM_CS1 = 0x0d,
+	CPU_ATTR_DRAM_CS2 = 0x0b,
+	CPU_ATTR_DRAM_CS3 = 0x07,
+	CPU_ATTR_NANDFLASH = 0x2f,
+	CPU_ATTR_SPIFLASH = 0x1e,
+	CPU_ATTR_SPI0_CS0 = 0x1e,
+	CPU_ATTR_SPI0_CS1 = 0x5e,
+	CPU_ATTR_SPI1_CS2 = 0x9a,
+	CPU_ATTR_BOOTROM = 0x1d,
+	CPU_ATTR_PCIE_IO = 0xe0,
+	CPU_ATTR_PCIE_MEM = 0xe8,
+	CPU_ATTR_DEV_CS0 = 0x3e,
+	CPU_ATTR_DEV_CS1 = 0x3d,
+	CPU_ATTR_DEV_CS2 = 0x3b,
+	CPU_ATTR_DEV_CS3 = 0x37,
+};
+
+enum {
+	MVEBU_SOC_AXP,
+	MVEBU_SOC_A375,
+	MVEBU_SOC_A38X,
+	MVEBU_SOC_MSYS,
+	MVEBU_SOC_UNKNOWN,
+};
+
+#define MVEBU_SDRAM_SIZE_MAX	0xc0000000
+
+/*
+ * Default Device Address MAP BAR values
+ */
+#define MBUS_PCI_MEM_BASE	MVEBU_SDRAM_SIZE_MAX
+#define MBUS_PCI_MEM_SIZE	(128 << 20)
+#define MBUS_PCI_IO_BASE	0xF1100000
+#define MBUS_PCI_IO_SIZE	(64 << 10)
+#define MBUS_SPI_BASE		0xF4000000
+#define MBUS_SPI_SIZE		(8 << 20)
+#define MBUS_DFX_BASE		0xF6000000
+#define MBUS_DFX_SIZE		(1 << 20)
+#define MBUS_BOOTROM_BASE	0xF8000000
+#define MBUS_BOOTROM_SIZE	(8 << 20)
+
+struct mbus_win {
+	u32 base;
+	u32 size;
+	u8 target;
+	u8 attr;
+};
+
+/*
+ * System registers
+ * Ref: Datasheet sec:A.28
+ */
+struct mvebu_system_registers {
+#if defined(CONFIG_ARMADA_375)
+	u8 pad1[0x54];
+#else
+	u8 pad1[0x60];
+#endif
+	u32 rstoutn_mask; /* 0x60 */
+	u32 sys_soft_rst; /* 0x64 */
+};
+
+/*
+ * GPIO Registers
+ * Ref: Datasheet sec:A.19
+ */
+struct kwgpio_registers {
+	u32 dout;
+	u32 oe;
+	u32 blink_en;
+	u32 din_pol;
+	u32 din;
+	u32 irq_cause;
+	u32 irq_mask;
+	u32 irq_level;
+};
+
+struct sar_freq_modes {
+	u8 val;
+	u8 ffc;		/* Fabric Frequency Configuration */
+	u32 p_clk;
+	u32 nb_clk;
+	u32 d_clk;
+};
+
+/* Needed for dynamic (board-specific) mbus configuration */
+extern struct mvebu_mbus_state mbus_state;
+
+/*
+ * functions
+ */
+unsigned int mvebu_sdram_bar(enum memory_bank bank);
+unsigned int mvebu_sdram_bs(enum memory_bank bank);
+void mvebu_sdram_size_adjust(enum memory_bank bank);
+int mvebu_mbus_probe(struct mbus_win windows[], int count);
+int mvebu_soc_family(void);
+u32 mvebu_get_nand_clock(void);
+
+void return_to_bootrom(void);
+
+#ifndef CONFIG_DM_MMC
+int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks);
+#endif
+
+void get_sar_freq(struct sar_freq_modes *sar_freq);
+
+/*
+ * Highspeed SERDES PHY config init, ported from bin_hdr
+ * to mainline U-Boot
+ */
+int serdes_phy_config(void);
+
+/*
+ * DDR3 init / training code ported from Marvell bin_hdr. Now
+ * available in mainline U-Boot in:
+ * drivers/ddr/marvell
+ */
+int ddr3_init(void);
+
+/* Auto Voltage Scaling */
+#if defined(CONFIG_ARMADA_38X)
+void mv_avs_init(void);
+void mv_rtc_config(void);
+#else
+static inline void mv_avs_init(void) {}
+static inline void mv_rtc_config(void) {}
+#endif
+
+/* A8K dram functions */
+u64 a8k_dram_scan_ap_sz(void);
+int a8k_dram_init_banksize(void);
+
+/* A3700 dram functions */
+int a3700_dram_init(void);
+int a3700_dram_init_banksize(void);
+
+/* A3700 PCIe regions fixer for device tree */
+int a3700_fdt_fix_pcie_regions(void *blob);
+
+/*
+ * get_ref_clk
+ *
+ * return: reference clock in MHz (25 or 40)
+ */
+u32 get_ref_clk(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _MVEBU_CPU_H */
diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/efuse.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/efuse.h
new file mode 100644
index 000000000..bbc5844d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/efuse.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Reinhard Pfau <reinhard.pfau@gdsys.cc>
+ */
+
+#ifndef _MVEBU_EFUSE_H
+#define _MVEBU_EFUSE_H
+
+#include <common.h>
+
+struct efuse_val {
+	union {
+		struct {
+			u8 d[8];
+		} bytes;
+		struct {
+			u16 d[4];
+		} words;
+		struct {
+			u32 d[2];
+		} dwords;
+	};
+	u32 lock;
+};
+
+#if defined(CONFIG_ARMADA_38X)
+
+enum efuse_line {
+	EFUSE_LINE_SECURE_BOOT = 24,
+	EFUSE_LINE_PUBKEY_DIGEST_0 = 26,
+	EFUSE_LINE_PUBKEY_DIGEST_1 = 27,
+	EFUSE_LINE_PUBKEY_DIGEST_2 = 28,
+	EFUSE_LINE_PUBKEY_DIGEST_3 = 29,
+	EFUSE_LINE_PUBKEY_DIGEST_4 = 30,
+	EFUSE_LINE_CSK_0_VALID = 31,
+	EFUSE_LINE_CSK_1_VALID = 32,
+	EFUSE_LINE_CSK_2_VALID = 33,
+	EFUSE_LINE_CSK_3_VALID = 34,
+	EFUSE_LINE_CSK_4_VALID = 35,
+	EFUSE_LINE_CSK_5_VALID = 36,
+	EFUSE_LINE_CSK_6_VALID = 37,
+	EFUSE_LINE_CSK_7_VALID = 38,
+	EFUSE_LINE_CSK_8_VALID = 39,
+	EFUSE_LINE_CSK_9_VALID = 40,
+	EFUSE_LINE_CSK_10_VALID = 41,
+	EFUSE_LINE_CSK_11_VALID = 42,
+	EFUSE_LINE_CSK_12_VALID = 43,
+	EFUSE_LINE_CSK_13_VALID = 44,
+	EFUSE_LINE_CSK_14_VALID = 45,
+	EFUSE_LINE_CSK_15_VALID = 46,
+	EFUSE_LINE_FLASH_ID = 47,
+	EFUSE_LINE_BOX_ID = 48,
+
+	EFUSE_LINE_MIN = 0,
+	EFUSE_LINE_MAX = 63,
+};
+
+#endif
+
+int mvebu_efuse_init_hw(void);
+
+int mvebu_read_efuse(int nr, struct efuse_val *val);
+
+int mvebu_write_efuse(int nr, struct efuse_val *val);
+
+int mvebu_lock_efuse(int nr);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/fw_info.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/fw_info.h
new file mode 100644
index 000000000..1382438e3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/fw_info.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ */
+
+#ifndef _FW_INFO_H_
+#define _FW_INFO_H_
+
+/* Protected ATF and TEE region */
+#define ATF_REGION_START		0x4000000
+#define ATF_REGION_END			0x5400000
+
+/* Firmware related definition used for SMC calls */
+#define MV_SIP_DRAM_SIZE		0x82000010
+
+#define MMIO_REGS_PHY_BASE		0xc0000000
+
+#endif /* _FW_INFO_H_ */
diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/gpio.h
new file mode 100644
index 000000000..b0c95db7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/gpio.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __MACH_MVEBU_GPIO_H
+#define __MACH_MVEBU_GPIO_H
+
+/* Empty file - sdhci requires this. */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/soc.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/soc.h
new file mode 100644
index 000000000..3f3b15aa8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/soc.h
@@ -0,0 +1,210 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * Header file for the Marvell's Feroceon CPU core.
+ */
+
+#ifndef _MVEBU_SOC_H
+#define _MVEBU_SOC_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define SOC_MV78230_ID		0x7823
+#define SOC_MV78260_ID		0x7826
+#define SOC_MV78460_ID		0x7846
+#define SOC_88F6720_ID		0x6720
+#define SOC_88F6810_ID		0x6810
+#define SOC_88F6820_ID		0x6820
+#define SOC_88F6828_ID		0x6828
+#define SOC_98DX3236_ID		0xf410
+#define SOC_98DX3336_ID		0xf400
+#define SOC_98DX4251_ID		0xfc00
+
+/* A375 revisions */
+#define MV_88F67XX_A0_ID	0x3
+
+/* A38x revisions */
+#define MV_88F68XX_Z1_ID	0x0
+#define MV_88F68XX_A0_ID	0x4
+#define MV_88F68XX_B0_ID	0xa
+
+/* TCLK Core Clock definition */
+#ifndef CONFIG_SYS_TCLK
+#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
+#endif
+
+/* SOC specific definations */
+#define INTREG_BASE		0xd0000000
+#define INTREG_BASE_ADDR_REG	(INTREG_BASE + 0x20080)
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARMADA_3700)
+/*
+ * The SPL U-Boot version still runs with the default
+ * address for the internal registers, configured by
+ * the BootROM. Only the main U-Boot version uses the
+ * new internal register base address, that also is
+ * required for the Linux kernel.
+ */
+#define SOC_REGS_PHY_BASE	0xd0000000
+#elif defined(CONFIG_ARMADA_8K)
+#define SOC_REGS_PHY_BASE	0xf0000000
+#else
+#define SOC_REGS_PHY_BASE	0xf1000000
+#endif
+#define MVEBU_REGISTER(x)	(SOC_REGS_PHY_BASE + x)
+
+#define MVEBU_SDRAM_SCRATCH	(MVEBU_REGISTER(0x01504))
+#define MVEBU_L2_CACHE_BASE	(MVEBU_REGISTER(0x08000))
+#define CONFIG_SYS_PL310_BASE	MVEBU_L2_CACHE_BASE
+#define MVEBU_TWSI_BASE		(MVEBU_REGISTER(0x11000))
+#define MVEBU_TWSI1_BASE	(MVEBU_REGISTER(0x11100))
+#define MVEBU_MPP_BASE		(MVEBU_REGISTER(0x18000))
+#define MVEBU_GPIO0_BASE	(MVEBU_REGISTER(0x18100))
+#define MVEBU_GPIO1_BASE	(MVEBU_REGISTER(0x18140))
+#define MVEBU_GPIO2_BASE	(MVEBU_REGISTER(0x18180))
+#define MVEBU_SYSTEM_REG_BASE	(MVEBU_REGISTER(0x18200))
+#define MVEBU_CLOCK_BASE	(MVEBU_REGISTER(0x18700))
+#define MVEBU_CPU_WIN_BASE	(MVEBU_REGISTER(0x20000))
+#define MVEBU_SDRAM_BASE	(MVEBU_REGISTER(0x20180))
+#define MVEBU_TIMER_BASE	(MVEBU_REGISTER(0x20300))
+#define MVEBU_REG_PCIE_BASE	(MVEBU_REGISTER(0x40000))
+#define MVEBU_AXP_USB_BASE      (MVEBU_REGISTER(0x50000))
+#define MVEBU_USB20_BASE	(MVEBU_REGISTER(0x58000))
+#define MVEBU_REG_PCIE0_BASE	(MVEBU_REGISTER(0x80000))
+#define MVEBU_AXP_SATA_BASE	(MVEBU_REGISTER(0xa0000))
+#define MVEBU_SATA0_BASE	(MVEBU_REGISTER(0xa8000))
+#define MVEBU_NAND_BASE		(MVEBU_REGISTER(0xd0000))
+#define MVEBU_SDIO_BASE		(MVEBU_REGISTER(0xd8000))
+#define MVEBU_LCD_BASE		(MVEBU_REGISTER(0xe0000))
+#ifdef CONFIG_ARMADA_MSYS
+#define MVEBU_DFX_BASE		(MBUS_DFX_BASE)
+#else
+#define MVEBU_DFX_BASE		(MVEBU_REGISTER(0xe4000))
+#endif
+
+#define SOC_COHERENCY_FABRIC_CTRL_REG	(MVEBU_REGISTER(0x20200))
+#define MBUS_ERR_PROP_EN	(1 << 8)
+
+#define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250))
+#define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254))
+
+#define MVEBU_SOC_DEV_MUX_REG	(MVEBU_SYSTEM_REG_BASE + 0x08)
+#define NAND_EN			BIT(0)
+#define NAND_ARBITER_EN		BIT(27)
+
+#define ARMADA_XP_PUP_ENABLE	(MVEBU_SYSTEM_REG_BASE + 0x44c)
+#define GE0_PUP_EN		BIT(0)
+#define GE1_PUP_EN		BIT(1)
+#define LCD_PUP_EN		BIT(2)
+#define NAND_PUP_EN		BIT(4)
+#define SPI_PUP_EN		BIT(5)
+
+#define MVEBU_CORE_DIV_CLK_CTRL(i)	(MVEBU_CLOCK_BASE + ((i) * 0x8))
+#ifdef CONFIG_ARMADA_MSYS
+#define MVEBU_DFX_DIV_CLK_CTRL(i)	(MVEBU_DFX_BASE + 0xf8000 + 0x250 + ((i) * 0x4))
+#define NAND_ECC_DIVCKL_RATIO_OFFS	6
+#define NAND_ECC_DIVCKL_RATIO_MASK	(0xF << NAND_ECC_DIVCKL_RATIO_OFFS)
+#else
+#define MVEBU_DFX_DIV_CLK_CTRL(i)	(MVEBU_DFX_BASE + 0x250 + ((i) * 0x4))
+#endif
+#ifdef CONFIG_ARMADA_MSYS
+#define NAND_ECC_DIVCKL_RATIO_OFFS	6
+#define NAND_ECC_DIVCKL_RATIO_MASK	(0xF << NAND_ECC_DIVCKL_RATIO_OFFS)
+#else
+#define NAND_ECC_DIVCKL_RATIO_OFFS	8
+#define NAND_ECC_DIVCKL_RATIO_MASK	(0x3F << NAND_ECC_DIVCKL_RATIO_OFFS)
+#endif
+
+#define SDRAM_MAX_CS		4
+#define SDRAM_ADDR_MASK		0xFF000000
+
+/* MVEBU CPU memory windows */
+#define MVCPU_WIN_CTRL_DATA	CPU_WIN_CTRL_DATA
+#define MVCPU_WIN_ENABLE	CPU_WIN_ENABLE
+#define MVCPU_WIN_DISABLE	CPU_WIN_DISABLE
+
+#define COMPHY_REFCLK_ALIGNMENT	(MVEBU_REGISTER(0x182f8))
+
+/* BootROM error register (also includes some status infos) */
+#define CONFIG_BOOTROM_ERR_REG	(MVEBU_REGISTER(0x182d0))
+#define BOOTROM_ERR_MODE_OFFS	28
+#define BOOTROM_ERR_MODE_MASK	(0xf << BOOTROM_ERR_MODE_OFFS)
+#define BOOTROM_ERR_MODE_UART	0x6
+#define BOOTROM_ERR_CODE_OFFS	0
+#define BOOTROM_ERR_CODE_MASK	(0xf << BOOTROM_ERR_CODE_OFFS)
+
+#if defined(CONFIG_ARMADA_375)
+/* SAR values for Armada 375 */
+#define CONFIG_SAR_REG		(MVEBU_REGISTER(0xe8200))
+#define CONFIG_SAR2_REG		(MVEBU_REGISTER(0xe8204))
+
+#define SAR_CPU_FREQ_OFFS	17
+#define SAR_CPU_FREQ_MASK	(0x1f << SAR_CPU_FREQ_OFFS)
+
+#define BOOT_DEV_SEL_OFFS	3
+#define BOOT_DEV_SEL_MASK	(0x3f << BOOT_DEV_SEL_OFFS)
+
+#define BOOT_FROM_UART		0x30
+#define BOOT_FROM_SPI		0x38
+#elif defined(CONFIG_ARMADA_38X)
+/* SAR values for Armada 38x */
+#define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18600))
+
+#define SAR_CPU_FREQ_OFFS	10
+#define SAR_CPU_FREQ_MASK	(0x1f << SAR_CPU_FREQ_OFFS)
+#define SAR_BOOT_DEVICE_OFFS	4
+#define SAR_BOOT_DEVICE_MASK	(0x1f << SAR_BOOT_DEVICE_OFFS)
+
+#define BOOT_DEV_SEL_OFFS	4
+#define BOOT_DEV_SEL_MASK	(0x3f << BOOT_DEV_SEL_OFFS)
+
+#define BOOT_FROM_NAND		0x0A
+#define BOOT_FROM_SATA		0x22
+#define BOOT_FROM_UART		0x28
+#define BOOT_FROM_SATA_ALT	0x2A
+#define BOOT_FROM_UART_ALT	0x3f
+#define BOOT_FROM_SPI		0x32
+#define BOOT_FROM_MMC		0x30
+#define BOOT_FROM_MMC_ALT	0x31
+#elif defined(CONFIG_ARMADA_MSYS)
+/* SAR values for MSYS */
+#define CONFIG_SAR_REG		(MBUS_DFX_BASE  + 0xf8200)
+#define CONFIG_SAR2_REG		(MBUS_DFX_BASE  + 0xf8204)
+
+#define SAR_CPU_FREQ_OFFS	18
+#define SAR_CPU_FREQ_MASK	(0x7 << SAR_CPU_FREQ_OFFS)
+#define SAR_BOOT_DEVICE_OFFS	11
+#define SAR_BOOT_DEVICE_MASK	(0x7 << SAR_BOOT_DEVICE_OFFS)
+
+#define BOOT_DEV_SEL_OFFS	11
+#define BOOT_DEV_SEL_MASK	(0x7 << BOOT_DEV_SEL_OFFS)
+
+#define BOOT_FROM_NAND		0x1
+#define BOOT_FROM_UART		0x2
+#define BOOT_FROM_SPI		0x3
+#else
+/* SAR values for Armada XP */
+#define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18230))
+#define CONFIG_SAR2_REG		(MVEBU_REGISTER(0x18234))
+
+#define SAR_CPU_FREQ_OFFS	21
+#define SAR_CPU_FREQ_MASK	(0x7 << SAR_CPU_FREQ_OFFS)
+#define SAR_FFC_FREQ_OFFS	24
+#define SAR_FFC_FREQ_MASK	(0xf << SAR_FFC_FREQ_OFFS)
+#define SAR2_CPU_FREQ_OFFS	20
+#define SAR2_CPU_FREQ_MASK	(0x1 << SAR2_CPU_FREQ_OFFS)
+#define SAR_BOOT_DEVICE_OFFS	5
+#define SAR_BOOT_DEVICE_MASK	(0xf << SAR_BOOT_DEVICE_OFFS)
+
+#define BOOT_DEV_SEL_OFFS	5
+#define BOOT_DEV_SEL_MASK	(0xf << BOOT_DEV_SEL_OFFS)
+
+#define BOOT_FROM_UART		0x2
+#define BOOT_FROM_SPI		0x3
+#endif
+
+#endif /* _MVEBU_SOC_H */
diff --git a/roms/u-boot/arch/arm/mach-mvebu/kwbimage.cfg.in b/roms/u-boot/arch/arm/mach-mvebu/kwbimage.cfg.in
new file mode 100644
index 000000000..72e67d75c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/kwbimage.cfg.in
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2014 Stefan Roese <sr@denx.de>
+#
+
+# Armada 38x uses version 1 image format
+VERSION		1
+
+# Boot Media configurations
+#@BOOT_FROM
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY spl/u-boot-spl.bin 0000005b 00000068
diff --git a/roms/u-boot/arch/arm/mach-mvebu/lowlevel_spl.S b/roms/u-boot/arch/arm/mach-mvebu/lowlevel_spl.S
new file mode 100644
index 000000000..8718d7a43
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/lowlevel_spl.S
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(save_boot_params)
+	stmfd	sp!, {r0 - r12, lr}	/* @ save registers on stack */
+	ldr	r12, =CONFIG_SPL_BOOTROM_SAVE
+	str	sp, [r12]
+	b	save_boot_params_ret
+ENDPROC(save_boot_params)
+
+ENTRY(return_to_bootrom)
+	ldr	r12, =CONFIG_SPL_BOOTROM_SAVE
+	ldr	sp, [r12]
+	mov	r0, #0x0		/* @ return value: 0x0 NO_ERR */
+	ldmfd	sp!, {r0 - r12, pc}	/* @ restore regs and return */
+ENDPROC(return_to_bootrom)
+
+/*
+ * cache_inv - invalidate Cache line
+ * r0 - dest
+ */
+	.global cache_inv
+	.type  cache_inv, %function
+	cache_inv:
+
+	stmfd   sp!, {r1-r12}
+
+	mcr     p15, 0, r0, c7, c6, 1
+
+	ldmfd   sp!, {r1-r12}
+	bx      lr
+
+
+/*
+ * flush_l1_v6 - l1 cache clean invalidate
+ * r0 - dest
+ */
+	.global flush_l1_v6
+	.type	flush_l1_v6, %function
+	flush_l1_v6:
+
+	stmfd   sp!, {r1-r12}
+
+	mcr     p15, 0, r0, c7, c10, 5	/* @ data memory barrier */
+	mcr     p15, 0, r0, c7, c14, 1	/* @ clean & invalidate D line */
+	mcr     p15, 0, r0, c7, c10, 4	/* @ data sync barrier */
+
+	ldmfd   sp!, {r1-r12}
+	bx      lr
+
+
+/*
+ * flush_l1_v7 - l1 cache clean invalidate
+ * r0 - dest
+ */
+	.global flush_l1_v7
+	.type	flush_l1_v7, %function
+	flush_l1_v7:
+
+	stmfd   sp!, {r1-r12}
+
+	dmb				/* @data memory barrier */
+	mcr     p15, 0, r0, c7, c14, 1	/* @ clean & invalidate D line */
+	dsb				/* @data sync barrier */
+
+	ldmfd   sp!, {r1-r12}
+	bx      lr
diff --git a/roms/u-boot/arch/arm/mach-mvebu/mbus.c b/roms/u-boot/arch/arm/mach-mvebu/mbus.c
new file mode 100644
index 000000000..3b1b9f73e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/mbus.c
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Address map functions for Marvell EBU SoCs (Kirkwood, Armada
+ * 370/XP, Dove, Orion5x and MV78xx0)
+ *
+ * Ported from the Barebox version to U-Boot by:
+ * Stefan Roese <sr@denx.de>
+ *
+ * The Barebox version is:
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * based on mbus driver from Linux
+ *   (C) Copyright 2008 Marvell Semiconductor
+ *
+ * The Marvell EBU SoCs have a configurable physical address space:
+ * the physical address at which certain devices (PCIe, NOR, NAND,
+ * etc.) sit can be configured. The configuration takes place through
+ * two sets of registers:
+ *
+ * - One to configure the access of the CPU to the devices. Depending
+ *   on the families, there are between 8 and 20 configurable windows,
+ *   each can be use to create a physical memory window that maps to a
+ *   specific device. Devices are identified by a tuple (target,
+ *   attribute).
+ *
+ * - One to configure the access to the CPU to the SDRAM. There are
+ *   either 2 (for Dove) or 4 (for other families) windows to map the
+ *   SDRAM into the physical address space.
+ *
+ * This driver:
+ *
+ * - Reads out the SDRAM address decoding windows at initialization
+ *   time, and fills the mbus_dram_info structure with these
+ *   informations. The exported function mv_mbus_dram_info() allow
+ *   device drivers to get those informations related to the SDRAM
+ *   address decoding windows. This is because devices also have their
+ *   own windows (configured through registers that are part of each
+ *   device register space), and therefore the drivers for Marvell
+ *   devices have to configure those device -> SDRAM windows to ensure
+ *   that DMA works properly.
+ *
+ * - Provides an API for platform code or device drivers to
+ *   dynamically add or remove address decoding windows for the CPU ->
+ *   device accesses. This API is mvebu_mbus_add_window_by_id(),
+ *   mvebu_mbus_add_window_remap_by_id() and
+ *   mvebu_mbus_del_window().
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/log2.h>
+#include <linux/mbus.h>
+
+/* DDR target is the same on all platforms */
+#define TARGET_DDR		0
+
+/* CPU Address Decode Windows registers */
+#define WIN_CTRL_OFF		0x0000
+#define   WIN_CTRL_ENABLE       BIT(0)
+#define   WIN_CTRL_TGT_MASK     0xf0
+#define   WIN_CTRL_TGT_SHIFT    4
+#define   WIN_CTRL_ATTR_MASK    0xff00
+#define   WIN_CTRL_ATTR_SHIFT   8
+#define   WIN_CTRL_SIZE_MASK    0xffff0000
+#define   WIN_CTRL_SIZE_SHIFT   16
+#define WIN_BASE_OFF		0x0004
+#define   WIN_BASE_LOW          0xffff0000
+#define   WIN_BASE_HIGH         0xf
+#define WIN_REMAP_LO_OFF	0x0008
+#define   WIN_REMAP_LOW         0xffff0000
+#define WIN_REMAP_HI_OFF	0x000c
+
+#define ATTR_HW_COHERENCY	(0x1 << 4)
+
+#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
+#define  DDR_BASE_CS_HIGH_MASK  0xf
+#define  DDR_BASE_CS_LOW_MASK   0xff000000
+#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
+#define  DDR_SIZE_ENABLED       BIT(0)
+#define  DDR_SIZE_CS_MASK       0x1c
+#define  DDR_SIZE_CS_SHIFT      2
+#define  DDR_SIZE_MASK          0xff000000
+
+#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
+
+struct mvebu_mbus_state;
+
+struct mvebu_mbus_soc_data {
+	unsigned int num_wins;
+	unsigned int num_remappable_wins;
+	unsigned int (*win_cfg_offset)(const int win);
+	void (*setup_cpu_target)(struct mvebu_mbus_state *s);
+};
+
+struct mvebu_mbus_state mbus_state
+	__section(".data");
+static struct mbus_dram_target_info mbus_dram_info
+	__section(".data");
+
+/*
+ * Functions to manipulate the address decoding windows
+ */
+
+static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus,
+				   int win, int *enabled, u64 *base,
+				   u32 *size, u8 *target, u8 *attr,
+				   u64 *remap)
+{
+	void __iomem *addr = mbus->mbuswins_base +
+		mbus->soc->win_cfg_offset(win);
+	u32 basereg = readl(addr + WIN_BASE_OFF);
+	u32 ctrlreg = readl(addr + WIN_CTRL_OFF);
+
+	if (!(ctrlreg & WIN_CTRL_ENABLE)) {
+		*enabled = 0;
+		return;
+	}
+
+	*enabled = 1;
+	*base = ((u64)basereg & WIN_BASE_HIGH) << 32;
+	*base |= (basereg & WIN_BASE_LOW);
+	*size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1;
+
+	if (target)
+		*target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT;
+
+	if (attr)
+		*attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT;
+
+	if (remap) {
+		if (win < mbus->soc->num_remappable_wins) {
+			u32 remap_low = readl(addr + WIN_REMAP_LO_OFF);
+			u32 remap_hi  = readl(addr + WIN_REMAP_HI_OFF);
+			*remap = ((u64)remap_hi << 32) | remap_low;
+		} else {
+			*remap = 0;
+		}
+	}
+}
+
+static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus,
+				      int win)
+{
+	void __iomem *addr;
+
+	addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win);
+
+	writel(0, addr + WIN_BASE_OFF);
+	writel(0, addr + WIN_CTRL_OFF);
+	if (win < mbus->soc->num_remappable_wins) {
+		writel(0, addr + WIN_REMAP_LO_OFF);
+		writel(0, addr + WIN_REMAP_HI_OFF);
+	}
+}
+
+/* Checks whether the given window number is available */
+static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
+				     const int win)
+{
+	void __iomem *addr = mbus->mbuswins_base +
+		mbus->soc->win_cfg_offset(win);
+	u32 ctrl = readl(addr + WIN_CTRL_OFF);
+	return !(ctrl & WIN_CTRL_ENABLE);
+}
+
+/*
+ * Checks whether the given (base, base+size) area doesn't overlap an
+ * existing region
+ */
+static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus,
+				       phys_addr_t base, size_t size,
+				       u8 target, u8 attr)
+{
+	u64 end = (u64)base + size;
+	int win;
+
+	for (win = 0; win < mbus->soc->num_wins; win++) {
+		u64 wbase, wend;
+		u32 wsize;
+		u8 wtarget, wattr;
+		int enabled;
+
+		mvebu_mbus_read_window(mbus, win,
+				       &enabled, &wbase, &wsize,
+				       &wtarget, &wattr, NULL);
+
+		if (!enabled)
+			continue;
+
+		wend = wbase + wsize;
+
+		/*
+		 * Check if the current window overlaps with the
+		 * proposed physical range
+		 */
+		if ((u64)base < wend && end > wbase)
+			return 0;
+
+		/*
+		 * Check if target/attribute conflicts
+		 */
+		if (target == wtarget && attr == wattr)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus,
+				  phys_addr_t base, size_t size)
+{
+	int win;
+
+	for (win = 0; win < mbus->soc->num_wins; win++) {
+		u64 wbase;
+		u32 wsize;
+		int enabled;
+
+		mvebu_mbus_read_window(mbus, win,
+				       &enabled, &wbase, &wsize,
+				       NULL, NULL, NULL);
+
+		if (!enabled)
+			continue;
+
+		if (base == wbase && size == wsize)
+			return win;
+	}
+
+	return -ENODEV;
+}
+
+static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
+				   int win, phys_addr_t base, size_t size,
+				   phys_addr_t remap, u8 target,
+				   u8 attr)
+{
+	void __iomem *addr = mbus->mbuswins_base +
+		mbus->soc->win_cfg_offset(win);
+	u32 ctrl, remap_addr;
+
+	ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
+		(attr << WIN_CTRL_ATTR_SHIFT)    |
+		(target << WIN_CTRL_TGT_SHIFT)   |
+		WIN_CTRL_ENABLE;
+
+	writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
+	writel(ctrl, addr + WIN_CTRL_OFF);
+	if (win < mbus->soc->num_remappable_wins) {
+		if (remap == MVEBU_MBUS_NO_REMAP)
+			remap_addr = base;
+		else
+			remap_addr = remap;
+		writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF);
+		writel(0, addr + WIN_REMAP_HI_OFF);
+	}
+
+	return 0;
+}
+
+static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus,
+				   phys_addr_t base, size_t size,
+				   phys_addr_t remap, u8 target,
+				   u8 attr)
+{
+	int win;
+
+	if (remap == MVEBU_MBUS_NO_REMAP) {
+		for (win = mbus->soc->num_remappable_wins;
+		     win < mbus->soc->num_wins; win++)
+			if (mvebu_mbus_window_is_free(mbus, win))
+				return mvebu_mbus_setup_window(mbus, win, base,
+							       size, remap,
+							       target, attr);
+	}
+
+
+	for (win = 0; win < mbus->soc->num_wins; win++)
+		if (mvebu_mbus_window_is_free(mbus, win))
+			return mvebu_mbus_setup_window(mbus, win, base, size,
+						       remap, target, attr);
+
+	return -ENOMEM;
+}
+
+/*
+ * SoC-specific functions and definitions
+ */
+
+static unsigned int armada_370_xp_mbus_win_offset(int win)
+{
+	/* The register layout is a bit annoying and the below code
+	 * tries to cope with it.
+	 * - At offset 0x0, there are the registers for the first 8
+	 *   windows, with 4 registers of 32 bits per window (ctrl,
+	 *   base, remap low, remap high)
+	 * - Then at offset 0x80, there is a hole of 0x10 bytes for
+	 *   the internal registers base address and internal units
+	 *   sync barrier register.
+	 * - Then at offset 0x90, there the registers for 12
+	 *   windows, with only 2 registers of 32 bits per window
+	 *   (ctrl, base).
+	 */
+	if (win < 8)
+		return win << 4;
+	else
+		return 0x90 + ((win - 8) << 3);
+}
+
+static unsigned int orion5x_mbus_win_offset(int win)
+{
+	return win << 4;
+}
+
+static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
+{
+	int i;
+	int cs;
+
+	mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 4; i++) {
+		u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+		u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+
+		/*
+		 * We only take care of entries for which the chip
+		 * select is enabled, and that don't have high base
+		 * address bits set (devices can only access the first
+		 * 32 bits of the memory).
+		 */
+		if ((size & DDR_SIZE_ENABLED) &&
+		    !(base & DDR_BASE_CS_HIGH_MASK)) {
+			struct mbus_dram_window *w;
+
+			w = &mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0xf & ~(1 << i);
+			w->base = base & DDR_BASE_CS_LOW_MASK;
+			w->size = (size | ~DDR_SIZE_MASK) + 1;
+		}
+	}
+	mbus_dram_info.num_cs = cs;
+
+#if defined(CONFIG_ARMADA_MSYS)
+	/* Disable MBUS Err Prop - in order to avoid data aborts */
+	clrbits_le32(mbus->mbuswins_base + 0x200, BIT(8));
+#endif
+}
+
+static const struct mvebu_mbus_soc_data
+armada_370_xp_mbus_data __maybe_unused = {
+	.num_wins            = 20,
+	.num_remappable_wins = 8,
+	.win_cfg_offset      = armada_370_xp_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
+};
+
+static const struct mvebu_mbus_soc_data
+kirkwood_mbus_data __maybe_unused = {
+	.num_wins            = 8,
+	.num_remappable_wins = 4,
+	.win_cfg_offset      = orion5x_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
+};
+
+/*
+ * Public API of the driver
+ */
+const struct mbus_dram_target_info *mvebu_mbus_dram_info(void)
+{
+	return &mbus_dram_info;
+}
+
+int mvebu_mbus_add_window_remap_by_id(unsigned int target,
+				      unsigned int attribute,
+				      phys_addr_t base, size_t size,
+				      phys_addr_t remap)
+{
+	struct mvebu_mbus_state *s = &mbus_state;
+
+	if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) {
+		printf("Cannot add window '%x:%x', conflicts with another window\n",
+		       target, attribute);
+		return -EINVAL;
+	}
+
+	return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
+}
+
+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
+				phys_addr_t base, size_t size)
+{
+	return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
+						 size, MVEBU_MBUS_NO_REMAP);
+}
+
+int mvebu_mbus_del_window(phys_addr_t base, size_t size)
+{
+	int win;
+
+	win = mvebu_mbus_find_window(&mbus_state, base, size);
+	if (win < 0)
+		return win;
+
+	mvebu_mbus_disable_window(&mbus_state, win);
+	return 0;
+}
+
+#ifndef CONFIG_ARCH_KIRKWOOD
+static void mvebu_mbus_get_lowest_base(struct mvebu_mbus_state *mbus,
+				       phys_addr_t *base)
+{
+	int win;
+	*base = 0xffffffff;
+
+	for (win = 0; win < mbus->soc->num_wins; win++) {
+		u64 wbase;
+		u32 wsize;
+		u8 wtarget, wattr;
+		int enabled;
+
+		mvebu_mbus_read_window(mbus, win,
+				       &enabled, &wbase, &wsize,
+				       &wtarget, &wattr, NULL);
+
+		if (!enabled)
+			continue;
+
+		if (wbase < *base)
+			*base = wbase;
+	}
+}
+
+static void mvebu_config_mbus_bridge(struct mvebu_mbus_state *mbus)
+{
+	phys_addr_t base;
+	u32 val;
+	u32 size;
+
+	/* Set MBUS bridge base/ctrl */
+	mvebu_mbus_get_lowest_base(&mbus_state, &base);
+
+	size = 0xffffffff - base + 1;
+	if (!is_power_of_2(size)) {
+		/* Round up to next power of 2 */
+		size = 1 << (ffs(base) + 1);
+		base = 0xffffffff - size + 1;
+	}
+
+	/* Now write base and size */
+	writel(base, MBUS_BRIDGE_WIN_BASE_REG);
+	/* Align window size to 64KiB */
+	val = (size / (64 << 10)) - 1;
+	writel((val << 16) | 0x1, MBUS_BRIDGE_WIN_CTRL_REG);
+}
+#endif
+
+int mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
+		      u32 base, u32 size, u8 target, u8 attr)
+{
+	if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) {
+		printf("Cannot add window '%04x:%04x', conflicts with another window\n",
+		       target, attr);
+		return -EBUSY;
+	}
+
+	/*
+	 * In U-Boot we first try to add the mbus window to the remap windows.
+	 * If this fails, lets try to add the windows to the non-remap windows.
+	 */
+	if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) {
+		if (mvebu_mbus_alloc_window(mbus, base, size,
+					    MVEBU_MBUS_NO_REMAP, target, attr))
+			return -ENOMEM;
+	}
+
+#ifndef CONFIG_ARCH_KIRKWOOD
+	/*
+	 * Re-configure the mbus bridge registers each time this function
+	 * is called. Since it may get called from the board code in
+	 * later boot stages as well.
+	 */
+	mvebu_config_mbus_bridge(mbus);
+#endif
+
+	return 0;
+}
+
+int mvebu_mbus_probe(struct mbus_win windows[], int count)
+{
+	int win;
+	int ret;
+	int i;
+
+#if defined(CONFIG_ARCH_KIRKWOOD)
+	mbus_state.soc = &kirkwood_mbus_data;
+#endif
+#if defined(CONFIG_ARCH_MVEBU)
+	mbus_state.soc = &armada_370_xp_mbus_data;
+#endif
+
+	mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE;
+	mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE;
+
+	for (win = 0; win < mbus_state.soc->num_wins; win++)
+		mvebu_mbus_disable_window(&mbus_state, win);
+
+	mbus_state.soc->setup_cpu_target(&mbus_state);
+
+	/* Setup statically declared windows in the DT */
+	for (i = 0; i < count; i++) {
+		u32 base, size;
+		u8 target, attr;
+
+		target = windows[i].target;
+		attr = windows[i].attr;
+		base = windows[i].base;
+		size = windows[i].size;
+		ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/Makefile b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/Makefile
new file mode 100644
index 000000000..917fc1350
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_SPL_BUILD)	= ctrl_pex.o
+obj-$(CONFIG_SPL_BUILD)	+= high_speed_env_spec.o
+obj-$(CONFIG_SPL_BUILD)	+= high_speed_env_spec-38x.o
+obj-$(CONFIG_SPL_BUILD)	+= seq_exec.o
+obj-$(CONFIG_SPL_BUILD)	+= sys_env_lib.o
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
new file mode 100644
index 000000000..adef3331a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+#include "ctrl_pex.h"
+#include "sys_env_lib.h"
+
+__weak void board_pex_config(void)
+{
+	/* nothing in this weak default implementation */
+}
+
+int hws_pex_config(const struct serdes_map *serdes_map, u8 count)
+{
+	u32 pex_idx, tmp, next_busno, first_busno, temp_pex_reg,
+	    temp_reg, addr, dev_id, ctrl_mode;
+	enum serdes_type serdes_type;
+	u32 idx;
+
+	DEBUG_INIT_FULL_S("\n### hws_pex_config ###\n");
+
+	for (idx = 0; idx < count; idx++) {
+		serdes_type = serdes_map[idx].serdes_type;
+		/* configuration for PEX only */
+		if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
+		    (serdes_type != PEX2) && (serdes_type != PEX3))
+			continue;
+
+		if ((serdes_type != PEX0) &&
+		    ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+		     (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
+			/* for PEX by4 - relevant for the first port only */
+			continue;
+		}
+
+		pex_idx = serdes_type - PEX0;
+		tmp = reg_read(PEX_CAPABILITIES_REG(pex_idx));
+		tmp &= ~(0xf << 20);
+		tmp |= (0x4 << 20);
+		reg_write(PEX_CAPABILITIES_REG(pex_idx), tmp);
+	}
+
+	tmp = reg_read(SOC_CTRL_REG);
+	tmp &= ~0x03;
+
+	for (idx = 0; idx < count; idx++) {
+		serdes_type = serdes_map[idx].serdes_type;
+		if ((serdes_type != PEX0) &&
+		    ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+		     (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
+			/* for PEX by4 - relevant for the first port only */
+			continue;
+		}
+
+		switch (serdes_type) {
+		case PEX0:
+			tmp |= 0x1 << PCIE0_ENABLE_OFFS;
+			break;
+		case PEX1:
+			tmp |= 0x1 << PCIE1_ENABLE_OFFS;
+			break;
+		case PEX2:
+			tmp |= 0x1 << PCIE2_ENABLE_OFFS;
+			break;
+		case PEX3:
+			tmp |= 0x1 << PCIE3_ENABLE_OFFS;
+			break;
+		default:
+			break;
+		}
+	}
+
+	reg_write(SOC_CTRL_REG, tmp);
+
+	/* Support gen1/gen2 */
+	DEBUG_INIT_FULL_S("Support gen1/gen2\n");
+
+	board_pex_config();
+
+	next_busno = 0;
+	mdelay(150);
+
+	for (idx = 0; idx < count; idx++) {
+		serdes_type = serdes_map[idx].serdes_type;
+		DEBUG_INIT_FULL_S(" serdes_type=0x");
+		DEBUG_INIT_FULL_D(serdes_type, 8);
+		DEBUG_INIT_FULL_S("\n");
+		DEBUG_INIT_FULL_S(" idx=0x");
+		DEBUG_INIT_FULL_D(idx, 8);
+		DEBUG_INIT_FULL_S("\n");
+
+		/* Configuration for PEX only */
+		if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
+		    (serdes_type != PEX2) && (serdes_type != PEX3))
+			continue;
+
+		if ((serdes_type != PEX0) &&
+		    ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+		     (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
+			/* for PEX by4 - relevant for the first port only */
+			continue;
+		}
+
+		pex_idx = serdes_type - PEX0;
+		tmp = reg_read(PEX_DBG_STATUS_REG(pex_idx));
+
+		first_busno = next_busno;
+		if ((tmp & 0x7f) != 0x7e) {
+			DEBUG_INIT_S("PCIe, Idx ");
+			DEBUG_INIT_D(pex_idx, 1);
+			DEBUG_INIT_S(": detected no link\n");
+			continue;
+		}
+
+		next_busno++;
+		temp_pex_reg = reg_read((PEX_CFG_DIRECT_ACCESS
+					 (pex_idx, PEX_LINK_CAPABILITY_REG)));
+		temp_pex_reg &= 0xf;
+		if (temp_pex_reg != 0x2)
+			continue;
+
+		temp_reg = (reg_read(PEX_CFG_DIRECT_ACCESS(
+					     pex_idx,
+					     PEX_LINK_CTRL_STAT_REG)) &
+			    0xf0000) >> 16;
+
+		/* Check if the link established is GEN1 */
+		DEBUG_INIT_FULL_S
+			("Checking if the link established is gen1\n");
+		if (temp_reg != 0x1)
+			continue;
+
+		pex_local_bus_num_set(pex_idx, first_busno);
+		pex_local_dev_num_set(pex_idx, 1);
+		DEBUG_INIT_FULL_S("PCIe, Idx ");
+		DEBUG_INIT_FULL_D(pex_idx, 1);
+
+		DEBUG_INIT_S(":** Link is Gen1, check the EP capability\n");
+		/* link is Gen1, check the EP capability */
+		addr = pex_config_read(pex_idx, first_busno, 0, 0, 0x34) & 0xff;
+		DEBUG_INIT_FULL_C("pex_config_read: return addr=0x%x", addr, 4);
+		if (addr == 0xff) {
+			DEBUG_INIT_FULL_C
+				("pex_config_read: return 0xff -->PCIe (%d): Detected No Link.",
+				 pex_idx, 1);
+			continue;
+		}
+
+		while ((pex_config_read(pex_idx, first_busno, 0, 0, addr)
+			& 0xff) != 0x10) {
+			addr = (pex_config_read(pex_idx, first_busno, 0,
+						0, addr) & 0xff00) >> 8;
+		}
+
+		/* Check for Gen2 and above */
+		if ((pex_config_read(pex_idx, first_busno, 0, 0,
+				     addr + 0xc) & 0xf) < 0x2) {
+			DEBUG_INIT_S("PCIe, Idx ");
+			DEBUG_INIT_D(pex_idx, 1);
+			DEBUG_INIT_S(": remains Gen1\n");
+			continue;
+		}
+
+		tmp = reg_read(PEX_LINK_CTRL_STATUS2_REG(pex_idx));
+		DEBUG_RD_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
+		tmp &= ~(BIT(0) | BIT(1));
+		tmp |= BIT(1);
+		tmp |= BIT(6);	/* Select Deemphasize (-3.5d_b) */
+		reg_write(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
+		DEBUG_WR_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
+
+		tmp = reg_read(PEX_CTRL_REG(pex_idx));
+		DEBUG_RD_REG(PEX_CTRL_REG(pex_idx), tmp);
+		tmp |= BIT(10);
+		reg_write(PEX_CTRL_REG(pex_idx), tmp);
+		DEBUG_WR_REG(PEX_CTRL_REG(pex_idx), tmp);
+
+		/*
+		 * We need to wait 10ms before reading the PEX_DBG_STATUS_REG
+		 * in order not to read the status of the former state
+		 */
+		mdelay(10);
+
+		DEBUG_INIT_S("PCIe, Idx ");
+		DEBUG_INIT_D(pex_idx, 1);
+		DEBUG_INIT_S
+			(": Link upgraded to Gen2 based on client capabilities\n");
+	}
+
+	/* Update pex DEVICE ID */
+	ctrl_mode = sys_env_model_get();
+
+	for (idx = 0; idx < count; idx++) {
+		serdes_type = serdes_map[idx].serdes_type;
+		/* configuration for PEX only */
+		if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
+		    (serdes_type != PEX2) && (serdes_type != PEX3))
+			continue;
+
+		if ((serdes_type != PEX0) &&
+		    ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+		     (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
+			/* for PEX by4 - relevant for the first port only */
+			continue;
+		}
+
+		pex_idx = serdes_type - PEX0;
+		dev_id = reg_read(PEX_CFG_DIRECT_ACCESS
+				  (pex_idx, PEX_DEVICE_AND_VENDOR_ID));
+		dev_id &= 0xffff;
+		dev_id |= ((ctrl_mode << 16) & 0xffff0000);
+		reg_write(PEX_CFG_DIRECT_ACCESS
+			  (pex_idx, PEX_DEVICE_AND_VENDOR_ID), dev_id);
+	}
+	DEBUG_INIT_FULL_C("Update PEX Device ID ", ctrl_mode, 4);
+
+	return MV_OK;
+}
+
+int pex_local_bus_num_set(u32 pex_if, u32 bus_num)
+{
+	u32 pex_status;
+
+	DEBUG_INIT_FULL_S("\n### pex_local_bus_num_set ###\n");
+
+	if (bus_num >= MAX_PEX_BUSSES) {
+		DEBUG_INIT_C("pex_local_bus_num_set: Illegal bus number %d\n",
+			     bus_num, 4);
+		return MV_BAD_PARAM;
+	}
+
+	pex_status = reg_read(PEX_STATUS_REG(pex_if));
+	pex_status &= ~PXSR_PEX_BUS_NUM_MASK;
+	pex_status |=
+	    (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK;
+	reg_write(PEX_STATUS_REG(pex_if), pex_status);
+
+	return MV_OK;
+}
+
+int pex_local_dev_num_set(u32 pex_if, u32 dev_num)
+{
+	u32 pex_status;
+
+	DEBUG_INIT_FULL_S("\n### pex_local_dev_num_set ###\n");
+
+	pex_status = reg_read(PEX_STATUS_REG(pex_if));
+	pex_status &= ~PXSR_PEX_DEV_NUM_MASK;
+	pex_status |=
+	    (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK;
+	reg_write(PEX_STATUS_REG(pex_if), pex_status);
+
+	return MV_OK;
+}
+
+/*
+ * pex_config_read - Read from configuration space
+ *
+ * DESCRIPTION:
+ *       This function performs a 32 bit read from PEX configuration space.
+ *       It supports both type 0 and type 1 of Configuration Transactions
+ *       (local and over bridge). In order to read from local bus segment, use
+ *       bus number retrieved from pex_local_bus_num_get(). Other bus numbers
+ *       will result configuration transaction of type 1 (over bridge).
+ *
+ * INPUT:
+ *       pex_if   - PEX interface number.
+ *       bus      - PEX segment bus number.
+ *       dev      - PEX device number.
+ *       func     - Function number.
+ *       reg_offs - Register offset.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       32bit register data, 0xffffffff on error
+ */
+u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off)
+{
+	u32 pex_data = 0;
+	u32 local_dev, local_bus;
+	u32 pex_status;
+
+	pex_status = reg_read(PEX_STATUS_REG(pex_if));
+	local_dev =
+	    ((pex_status & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS);
+	local_bus =
+	    ((pex_status & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS);
+
+	/*
+	 * In PCI Express we have only one device number
+	 * and this number is the first number we encounter
+	 * else that the local_dev
+	 * spec pex define return on config read/write on any device
+	 */
+	if (bus == local_bus) {
+		if (local_dev == 0) {
+			/*
+			 * if local dev is 0 then the first number we encounter
+			 * after 0 is 1
+			 */
+			if ((dev != 1) && (dev != local_dev))
+				return MV_ERROR;
+		} else {
+			/*
+			 * if local dev is not 0 then the first number we
+			 * encounter is 0
+			 */
+			if ((dev != 0) && (dev != local_dev))
+				return MV_ERROR;
+		}
+	}
+
+	/* Creating PEX address to be passed */
+	pex_data = (bus << PXCAR_BUS_NUM_OFFS);
+	pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS);
+	pex_data |= (func << PXCAR_FUNC_NUM_OFFS);
+	/* Legacy register space */
+	pex_data |= (reg_off & PXCAR_REG_NUM_MASK);
+	/* Extended register space */
+	pex_data |= (((reg_off & PXCAR_REAL_EXT_REG_NUM_MASK) >>
+		      PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
+	pex_data |= PXCAR_CONFIG_EN;
+
+	/* Write the address to the PEX configuration address register */
+	reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data);
+
+	/*
+	 * In order to let the PEX controller absorbed the address
+	 * of the read transaction we perform a validity check that
+	 * the address was written
+	 */
+	if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if)))
+		return MV_ERROR;
+
+	/* Cleaning Master Abort */
+	reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND),
+		    PXSAC_MABORT);
+	/* Read the Data returned in the PEX Data register */
+	pex_data = reg_read(PEX_CFG_DATA_REG(pex_if));
+
+	DEBUG_INIT_FULL_C(" --> ", pex_data, 4);
+
+	return pex_data;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
new file mode 100644
index 000000000..3f30b6bf9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#ifndef _CTRL_PEX_H
+#define _CTRL_PEX_H
+
+#include "high_speed_env_spec.h"
+
+/* Sample at Reset */
+#define MPP_SAMPLE_AT_RESET(id)		(0xe4200 + (id * 4))
+
+/* PCI Express Control and Status Registers */
+#define MAX_PEX_BUSSES			256
+
+#define MISC_REGS_OFFSET		0x18200
+#define MV_MISC_REGS_BASE		MISC_REGS_OFFSET
+#define SOC_CTRL_REG			(MV_MISC_REGS_BASE + 0x4)
+
+#define PEX_IF_REGS_OFFSET(if)		((if) > 0 ?			\
+					 (0x40000 + ((if) - 1) * 0x4000) : \
+					 0x80000)
+#define PEX_IF_REGS_BASE(if)		(PEX_IF_REGS_OFFSET(if))
+#define PEX_CAPABILITIES_REG(if)	((PEX_IF_REGS_BASE(if)) + 0x60)
+#define PEX_LINK_CTRL_STATUS2_REG(if)	((PEX_IF_REGS_BASE(if)) + 0x90)
+#define PEX_CTRL_REG(if)		((PEX_IF_REGS_BASE(if)) + 0x1a00)
+#define PEX_STATUS_REG(if)		((PEX_IF_REGS_BASE(if)) + 0x1a04)
+#define PEX_DBG_STATUS_REG(if)		((PEX_IF_REGS_BASE(if)) + 0x1a64)
+#define PEX_LINK_CAPABILITY_REG		0x6c
+#define PEX_LINK_CTRL_STAT_REG		0x70
+#define PXSR_PEX_DEV_NUM_OFFS		16  /* Device Number Indication */
+#define PXSR_PEX_DEV_NUM_MASK		(0x1f << PXSR_PEX_DEV_NUM_OFFS)
+#define PXSR_PEX_BUS_NUM_OFFS		8 /* Bus Number Indication */
+#define PXSR_PEX_BUS_NUM_MASK		(0xff << PXSR_PEX_BUS_NUM_OFFS)
+
+/* PEX_CAPABILITIES_REG fields */
+#define PCIE0_ENABLE_OFFS		0
+#define PCIE0_ENABLE_MASK		(0x1 << PCIE0_ENABLE_OFFS)
+#define PCIE1_ENABLE_OFFS		1
+#define PCIE1_ENABLE_MASK		(0x1 << PCIE1_ENABLE_OFFS)
+#define PCIE2_ENABLE_OFFS		2
+#define PCIE2_ENABLE_MASK		(0x1 << PCIE2_ENABLE_OFFS)
+#define PCIE3_ENABLE_OFFS		3
+#define PCIE4_ENABLE_MASK		(0x1 << PCIE3_ENABLE_OFFS)
+
+/* Controller revision info */
+#define PEX_DEVICE_AND_VENDOR_ID	0x000
+#define PEX_CFG_DIRECT_ACCESS(if, reg)	(PEX_IF_REGS_BASE(if) + (reg))
+
+/* PCI Express Configuration Address Register */
+#define PXCAR_REG_NUM_OFFS		2
+#define PXCAR_REG_NUM_MAX		0x3f
+#define PXCAR_REG_NUM_MASK		(PXCAR_REG_NUM_MAX << \
+					 PXCAR_REG_NUM_OFFS)
+#define PXCAR_FUNC_NUM_OFFS		8
+#define PXCAR_FUNC_NUM_MAX		0x7
+#define PXCAR_FUNC_NUM_MASK		(PXCAR_FUNC_NUM_MAX << \
+					 PXCAR_FUNC_NUM_OFFS)
+#define PXCAR_DEVICE_NUM_OFFS		11
+#define PXCAR_DEVICE_NUM_MAX		0x1f
+#define PXCAR_DEVICE_NUM_MASK		(PXCAR_DEVICE_NUM_MAX << \
+					 PXCAR_DEVICE_NUM_OFFS)
+#define PXCAR_BUS_NUM_OFFS		16
+#define PXCAR_BUS_NUM_MAX		0xff
+#define PXCAR_BUS_NUM_MASK		(PXCAR_BUS_NUM_MAX << \
+					 PXCAR_BUS_NUM_OFFS)
+#define PXCAR_EXT_REG_NUM_OFFS		24
+#define PXCAR_EXT_REG_NUM_MAX		0xf
+
+#define PEX_CFG_ADDR_REG(if)		((PEX_IF_REGS_BASE(if)) + 0x18f8)
+#define PEX_CFG_DATA_REG(if)		((PEX_IF_REGS_BASE(if)) + 0x18fc)
+
+#define PXCAR_REAL_EXT_REG_NUM_OFFS	8
+#define PXCAR_REAL_EXT_REG_NUM_MASK	(0xf << PXCAR_REAL_EXT_REG_NUM_OFFS)
+
+#define PXCAR_CONFIG_EN			BIT(31)
+#define PEX_STATUS_AND_COMMAND		0x004
+#define PXSAC_MABORT			BIT(29) /* Recieved Master Abort */
+
+int hws_pex_config(const struct serdes_map *serdes_map, u8 count);
+int pex_local_bus_num_set(u32 pex_if, u32 bus_num);
+int pex_local_dev_num_set(u32 pex_if, u32 dev_num);
+u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off);
+
+void board_pex_config(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
new file mode 100644
index 000000000..12596ec2d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "high_speed_env_spec.h"
+#include "sys_env_lib.h"
+
+u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = {
+	/* 0  1    2    3    4    5 */
+	{0x1, 0x1, NA,  NA,  NA,  NA},		/* PEX0 */
+	{NA,  0x2, 0x1, NA,  0x1, NA},		/* PEX1 */
+	{NA,  NA,  0x2, NA,  NA,  0x1},		/* PEX2 */
+	{NA,  NA,  NA,  0x1, NA,  NA},		/* PEX3 */
+	{0x2, 0x3, NA,  NA,  NA,  NA},		/* SATA0 */
+	{NA,  NA,  0x3, NA,  0x2, NA},		/* SATA1 */
+	{NA,  NA,  NA,  NA,  0x6, 0x2},		/* SATA2 */
+	{NA,  NA,  NA,  0x3, NA,  NA},		/* SATA3 */
+	{0x3, 0x4, NA,  NA,  NA,  NA},		/* SGMII0 */
+	{NA,  0x5, 0x4, NA,  0x3, NA},		/* SGMII1 */
+	{NA,  NA,  NA,  0x4, NA,  0x3},		/* SGMII2 */
+	{NA,  0x7, NA,  NA,  NA,  NA},		/* QSGMII */
+	{NA,  0x6, NA,  NA,  0x4, NA},		/* USB3_HOST0 */
+	{NA,  NA,  NA,  0x5, NA,  0x4},		/* USB3_HOST1 */
+	{NA,  NA,  NA,  0x6, 0x5, 0x5},		/* USB3_DEVICE */
+	{0x0, 0x0, 0x0, 0x0, 0x0, 0x0}		/* DEFAULT_SERDES */
+};
+
+int hws_serdes_seq_init(void)
+{
+	DEBUG_INIT_FULL_S("\n### serdes_seq_init ###\n");
+
+	if (hws_serdes_seq_db_init() != MV_OK) {
+		printf("hws_serdes_seq_init: Error: Serdes initialization fail\n");
+		return MV_FAIL;
+	}
+
+	return MV_OK;
+}
+
+int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up,
+			     enum serdes_type serdes_type,
+			     enum serdes_speed baud_rate,
+			     enum serdes_mode serdes_mode,
+			     enum ref_clock ref_clock)
+{
+	return MV_NOT_SUPPORTED;
+}
+
+u32 hws_serdes_silicon_ref_clock_get(void)
+{
+	DEBUG_INIT_FULL_S("\n### hws_serdes_silicon_ref_clock_get ###\n");
+
+	return REF_CLOCK_25MHZ;
+}
+
+u32 hws_serdes_get_max_lane(void)
+{
+	switch (sys_env_device_id_get()) {
+	case MV_6811:		/* A381/A3282: 6811/6821: single/dual cpu */
+		return 4;
+	case MV_6810:
+		return 5;
+	case MV_6820:
+	case MV_6828:
+		return 6;
+	default:		/* not the right module */
+		printf("%s: Device ID Error, using 4 SerDes lanes\n",
+		       __func__);
+		return 4;
+	}
+	return 6;
+}
+
+int hws_is_serdes_active(u8 lane_num)
+{
+	int ret = 1;
+
+	/* Maximum lane count for A388 (6828) is 6 */
+	if (lane_num > 6)
+		ret = 0;
+
+	/* 4th Lane (#4 on Device 6810 is not Active */
+	if (sys_env_device_id_get() == MV_6810 && lane_num == 4) {
+		printf("%s: Error: Lane#4 on Device 6810 is not Active.\n",
+		       __func__);
+		return 0;
+	}
+
+	/*
+	 * 6th Lane (#5) on Device 6810 is Active, even though 6810
+	 * has only 5 lanes
+	 */
+	if (sys_env_device_id_get() == MV_6810 && lane_num == 5)
+		return 1;
+
+	if (lane_num >= hws_serdes_get_max_lane())
+		ret = 0;
+
+	return ret;
+}
+
+int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset,
+			  u32 *unit_base_reg, u32 *unit_offset)
+{
+	*unit_base_reg = base_addr;
+	*unit_offset = unit_base_offset;
+
+	return MV_OK;
+}
+
+/*
+ * hws_serdes_get_phy_selector_val
+ *
+ * DESCRIPTION: Get the mapping of Serdes Selector values according to the
+ *              Serdes revision number
+ * INPUT:    serdes_num - Serdes number
+ *           serdes_type - Serdes type
+ * OUTPUT: None
+ * RETURN:
+ *       Mapping of Serdes Selector values
+ */
+u32 hws_serdes_get_phy_selector_val(int serdes_num,
+				    enum serdes_type serdes_type)
+{
+	if (serdes_type >= LAST_SERDES_TYPE)
+		return 0xff;
+
+	if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) {
+		return selectors_serdes_rev1_map
+			[serdes_type][serdes_num];
+	} else
+		return selectors_serdes_rev2_map
+			[serdes_type][serdes_num];
+}
+
+u32 hws_get_physical_serdes_num(u32 serdes_num)
+{
+	if ((serdes_num == 4) && (sys_env_device_id_get() == MV_6810)) {
+		/*
+		 * For 6810, there are 5 Serdes and Serdes Num 4 doesn't
+		 * exist. Instead Serdes Num 5 is connected.
+		 */
+		return 5;
+	} else {
+		return serdes_num;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
new file mode 100644
index 000000000..3b41c7d49
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -0,0 +1,2173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/delay.h>
+
+#include "high_speed_env_spec.h"
+#include "sys_env_lib.h"
+#include "ctrl_pex.h"
+
+
+
+/*
+ * serdes_seq_db - holds all serdes sequences, their size and the
+ * relevant index in the data array initialized in serdes_seq_init
+ */
+struct cfg_seq serdes_seq_db[SERDES_LAST_SEQ];
+
+#define	SERDES_VERSION		"2.0"
+#define ENDED_OK		"High speed PHY - Ended Successfully\n"
+
+#define LINK_WAIT_CNTR		100
+#define LINK_WAIT_SLEEP		100
+
+#define MAX_UNIT_NUMB		4
+#define TOPOLOGY_TEST_OK	0
+#define WRONG_NUMBER_OF_UNITS	1
+#define SERDES_ALREADY_IN_USE	2
+#define UNIT_NUMBER_VIOLATION	3
+
+/*
+ * serdes_lane_in_use_count contains the exact amount of serdes lanes
+ * needed per type
+ */
+u8 serdes_lane_in_use_count[MAX_UNITS_ID][MAX_UNIT_NUMB] = {
+	/* 0  1  2  3  */
+	{  1, 1, 1, 1 },	/* PEX     */
+	{  1, 1, 1, 1 },	/* ETH_GIG */
+	{  1, 1, 0, 0 },	/* USB3H   */
+	{  1, 1, 1, 0 },	/* USB3D   */
+	{  1, 1, 1, 1 },	/* SATA    */
+	{  1, 0, 0, 0 },	/* QSGMII  */
+	{  4, 0, 0, 0 },	/* XAUI    */
+	{  2, 0, 0, 0 }		/* RXAUI   */
+};
+
+/*
+ * serdes_unit_count count unit number.
+ * (i.e a single XAUI is counted as 1 unit)
+ */
+u8 serdes_unit_count[MAX_UNITS_ID] = { 0 };
+
+/* Selector mapping for A380-A0 and A390-Z1 */
+u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = {
+	/* 0      1      2       3       4       5       6 */
+	{ 0x1,   0x1,    NA,	 NA,	 NA,	 NA,     NA  }, /* PEX0 */
+	{ NA,    NA,     0x1,	 NA,	 0x1,	 NA,     0x1 }, /* PEX1 */
+	{ NA,    NA,     NA,	 NA,	 0x7,	 0x1,    NA  }, /* PEX2 */
+	{ NA,    NA,     NA,	 0x1,	 NA,	 NA,     NA  }, /* PEX3 */
+	{ 0x2,   0x3,    NA,	 NA,	 NA,	 NA,     NA  }, /* SATA0 */
+	{ NA,    NA,     0x3,	 NA,	 NA,	 NA,     NA  }, /* SATA1 */
+	{ NA,    NA,     NA,	 NA,	 0x6,	 0x2,    NA  }, /* SATA2 */
+	{ NA,	 NA,     NA,	 0x3,	 NA,	 NA,     NA  }, /* SATA3 */
+	{ 0x3,   0x4,    NA,     NA,	 NA,	 NA,     NA  }, /* SGMII0 */
+	{ NA,    0x5,    0x4,    NA,	 0x3,	 NA,     NA  }, /* SGMII1 */
+	{ NA,    NA,     NA,	 0x4,	 NA,	 0x3,    NA  }, /* SGMII2 */
+	{ NA,    0x7,    NA,	 NA,	 NA,	 NA,     NA  }, /* QSGMII */
+	{ NA,    0x6,    NA,	 NA,	 0x4,	 NA,     NA  }, /* USB3_HOST0 */
+	{ NA,    NA,     NA,	 0x5,	 NA,	 0x4,    NA  }, /* USB3_HOST1 */
+	{ NA,    NA,     NA,	 0x6,	 0x5,	 0x5,    NA  }, /* USB3_DEVICE */
+	{ 0x0,   0x0,    0x0,	 0x0,	 0x0,	 0x0,    NA  }  /* DEFAULT_SERDES */
+};
+
+/* Selector mapping for PEX by 4 confiuration */
+u8 common_phys_selectors_pex_by4_lanes[] = { 0x1, 0x2, 0x2, 0x2 };
+
+static const char *const serdes_type_to_string[] = {
+	"PCIe0",
+	"PCIe1",
+	"PCIe2",
+	"PCIe3",
+	"SATA0",
+	"SATA1",
+	"SATA2",
+	"SATA3",
+	"SGMII0",
+	"SGMII1",
+	"SGMII2",
+	"QSGMII",
+	"USB3 HOST0",
+	"USB3 HOST1",
+	"USB3 DEVICE",
+	"SGMII3",
+	"XAUI",
+	"RXAUI",
+	"DEFAULT SERDES",
+	"LAST_SERDES_TYPE"
+};
+
+struct serdes_unit_data {
+	u8 serdes_unit_id;
+	u8 serdes_unit_num;
+};
+
+static struct serdes_unit_data serdes_type_to_unit_info[] = {
+	{PEX_UNIT_ID, 0,},
+	{PEX_UNIT_ID, 1,},
+	{PEX_UNIT_ID, 2,},
+	{PEX_UNIT_ID, 3,},
+	{SATA_UNIT_ID, 0,},
+	{SATA_UNIT_ID, 1,},
+	{SATA_UNIT_ID, 2,},
+	{SATA_UNIT_ID, 3,},
+	{ETH_GIG_UNIT_ID, 0,},
+	{ETH_GIG_UNIT_ID, 1,},
+	{ETH_GIG_UNIT_ID, 2,},
+	{QSGMII_UNIT_ID, 0,},
+	{USB3H_UNIT_ID, 0,},
+	{USB3H_UNIT_ID, 1,},
+	{USB3D_UNIT_ID, 0,},
+	{ETH_GIG_UNIT_ID, 3,},
+	{XAUI_UNIT_ID, 0,},
+	{RXAUI_UNIT_ID, 0,},
+};
+
+/* Sequences DB */
+
+/*
+ * SATA and SGMII
+ */
+
+struct op_params sata_port0_power_up_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+	 * num_of_loops
+	 */
+	/* Access to reg 0x48(OOB param 1) */
+	{SATA_VENDOR_PORT_0_REG_ADDR, 0x38000, 0xffffffff, {0x48,}, 0, 0},
+	/* OOB Com_wake and Com_reset spacing upper limit data */
+	{SATA_VENDOR_PORT_0_REG_DATA, 0x38000, 0xf03f, {0x6018,}, 0, 0},
+	/* Access to reg 0xa(PHY Control) */
+	{SATA_VENDOR_PORT_0_REG_ADDR, 0x38000, 0xffffffff, {0xa,}, 0, 0},
+	/* Rx clk and Tx clk select non-inverted mode */
+	{SATA_VENDOR_PORT_0_REG_DATA, 0x38000, 0x3000, {0x0,}, 0, 0},
+	/* Power Down Sata addr */
+	{SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0,}, 0, 0},
+	/* Power Down Sata Port 0 */
+	{SATA_CTRL_REG_IND_DATA, 0x38000, 0xffff00ff, {0xc40040,}, 0, 0},
+};
+
+struct op_params sata_port1_power_up_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+	 * num_of_loops
+	 */
+	/* Access to reg 0x48(OOB param 1) */
+	{SATA_VENDOR_PORT_1_REG_ADDR, 0x38000, 0xffffffff, {0x48,}, 0, 0},
+	/* OOB Com_wake and Com_reset spacing upper limit data */
+	{SATA_VENDOR_PORT_1_REG_DATA, 0x38000, 0xf03f, {0x6018,}, 0, 0},
+	/* Access to reg 0xa(PHY Control) */
+	{SATA_VENDOR_PORT_1_REG_ADDR, 0x38000, 0xffffffff, {0xa,}, 0, 0},
+	/* Rx clk and Tx clk select non-inverted mode */
+	{SATA_VENDOR_PORT_1_REG_DATA, 0x38000, 0x3000, {0x0,}, 0, 0},
+	/* Power Down Sata addr */
+	{SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0,}, 0, 0},
+	/* Power Down Sata Port 1 */
+	{SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffff00, {0xc44000,}, 0, 0},
+};
+
+/* SATA and SGMII - power up seq */
+struct op_params sata_and_sgmii_power_up_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, SGMII data,
+	 * wait_time, num_of_loops
+	 */
+	/* Power Up */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x90006, {0x80002, 0x80002},
+	 0, 0},
+	/* Unreset */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0x6000}, 0, 0},
+	/* Phy Selector */
+	{POWER_AND_PLL_CTRL_REG, 0x800, 0x0e0, {0x0, 0x80}, 0, 0},
+	/* Ref clock source select */
+	{MISC_REG, 0x800, 0x440, {0x440, 0x400}, 0, 0}
+};
+
+/* SATA and SGMII - speed config seq */
+struct op_params sata_and_sgmii_speed_config_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data,
+	 * SGMII (1.25G), SGMII (3.125G), wait_time, num_of_loops
+	 */
+	/* Baud Rate */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc00000,
+	 {0x8800000, 0x19800000, 0x22000000}, 0, 0},
+	/* Select Baud Rate for SATA only */
+	{INTERFACE_REG, 0x800, 0xc00, {0x800, NO_DATA, NO_DATA}, 0, 0},
+	/* Phy Gen RX and TX */
+	{ISOLATE_REG, 0x800, 0xff, {NO_DATA, 0x66, 0x66}, 0, 0},
+	/* Bus Width */
+	{LOOPBACK_REG, 0x800, 0xe, {0x4, 0x2, 0x2}, 0, 0}
+};
+
+/* SATA and SGMII - TX config seq */
+struct op_params sata_and_sgmii_tx_config_params1[] = {
+	/*
+	 * unitunit_base_reg, unit_offset, mask, SATA data, SGMII data,
+	 * wait_time, num_of_loops
+	 */
+	{GLUE_REG, 0x800, 0x1800, {NO_DATA, 0x800}, 0, 0},
+	/* Sft Reset pulse */
+	{RESET_DFE_REG, 0x800, 0x401, {0x401, 0x401}, 0, 0},
+	/* Sft Reset pulse */
+	{RESET_DFE_REG, 0x800, 0x401, {0x0, 0x0}, 0, 0},
+	/* Power up PLL, RX and TX */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0xf0000, {0x70000, 0x70000},
+	 0, 0}
+};
+
+struct op_params sata_port0_tx_config_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+	 * num_of_loops
+	 */
+	/* Power Down Sata addr */
+	{SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0}, 0, 0},
+	/* Power Down Sata  Port 0 */
+	{SATA_CTRL_REG_IND_DATA, 0x38000, 0xffff00ff, {0xc40000}, 0, 0},
+	/* Regret bit addr */
+	{SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x4}, 0, 0},
+	/* Regret bit data */
+	{SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffffff, {0x80}, 0, 0}
+};
+
+struct op_params sata_port1_tx_config_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+	 * num_of_loops
+	 */
+	/* Power Down Sata addr */
+	{SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0}, 0, 0},
+	/* Power Down Sata Port 1 */
+	{SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffff00, {0xc40000}, 0, 0},
+	/* Regret bit addr */
+	{SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x4}, 0, 0},
+	/* Regret bit data */
+	{SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffffff, {0x80}, 0, 0}
+};
+
+struct op_params sata_and_sgmii_tx_config_serdes_rev1_params2[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, SGMII data,
+	 * wait_time, num_of_loops
+	 */
+	/* Wait for PHY power up sequence to finish */
+	{COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc, 0xc}, 10, 1000},
+	/* Wait for PHY power up sequence to finish */
+	{COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1, 0x1}, 1, 1000}
+};
+
+struct op_params sata_and_sgmii_tx_config_serdes_rev2_params2[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, SGMII data,
+	 * wait_time, num_of_loops
+	 */
+	/* Wait for PHY power up sequence to finish */
+	{COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc, 0xc}, 10, 1000},
+	/* Assert Rx Init for SGMII */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {NA, 0x40000000},
+	 0, 0},
+	/* Assert Rx Init for SATA */
+	{ISOLATE_REG, 0x800, 0x400, {0x400, NA}, 0, 0},
+	/* Wait for PHY power up sequence to finish */
+	{COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1, 0x1}, 1, 1000},
+	/* De-assert Rx Init for SGMII */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {NA, 0x0}, 0, 0},
+	/* De-assert Rx Init for SATA */
+	{ISOLATE_REG, 0x800, 0x400, {0x0, NA}, 0, 0},
+	/* os_ph_offset_force (align 90) */
+	{RX_REG3, 0x800, 0xff, {0xde, NO_DATA}, 0, 0},
+	/* Set os_ph_valid */
+	{RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0},
+	/* Unset os_ph_valid */
+	{RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0},
+};
+
+struct op_params sata_electrical_config_serdes_rev1_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+	 * num_of_loops
+	 */
+	/* enable SSC and DFE update enable */
+	{COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x400008, {0x400000,}, 0, 0},
+	/* tximpcal_th and rximpcal_th */
+	{VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000,}, 0, 0},
+	/* SQ_THRESH and FFE Setting */
+	{SQUELCH_FFE_SETTING_REG, 0x800, 0xfff, {0x6cf,}, 0, 0},
+	/* G1_TX SLEW, EMPH1 and AMP */
+	{G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8a32,}, 0, 0},
+	/* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9,}, 0, 0},
+	/* G2_TX SLEW, EMPH1 and AMP */
+	{G2_SETTINGS_0_REG, 0x800, 0xffff, {0x8b5c,}, 0, 0},
+	/* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2,}, 0, 0},
+	/* G3_TX SLEW, EMPH1 and AMP */
+	{G3_SETTINGS_0_REG, 0x800, 0xffff, {0xe6e,}, 0, 0},
+	/* G3_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G3_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2,}, 0, 0},
+	/* Cal rxclkalign90 ext enable and Cal os ph ext */
+	{CAL_REG6, 0x800, 0xff00, {0xdd00,}, 0, 0},
+	/* Dtl Clamping disable and Dtl clamping Sel(6000ppm) */
+	{RX_REG2, 0x800, 0xf0, {0x70,}, 0, 0},
+};
+
+struct op_params sata_electrical_config_serdes_rev2_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+	 * num_of_loops
+	 */
+	/* SQ_THRESH and FFE Setting */
+	{SQUELCH_FFE_SETTING_REG, 0x800, 0xf00, {0x600}, 0, 0},
+	/* enable SSC and DFE update enable */
+	{COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x400008, {0x400000}, 0, 0},
+	/* G1_TX SLEW, EMPH1 and AMP */
+	{G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8a32}, 0, 0},
+	/* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+	/* G2_TX SLEW, EMPH1 and AMP */
+	{G2_SETTINGS_0_REG, 0x800, 0xffff, {0x8b5c}, 0, 0},
+	/* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0},
+	/* G3_TX SLEW, EMPH1 and AMP */
+	{G3_SETTINGS_0_REG, 0x800, 0xffff, {0xe6e}, 0, 0},
+	/*
+	 * G3_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI & DFE_En Gen3,
+	 * DC wander calibration dis
+	 */
+	{G3_SETTINGS_1_REG, 0x800, 0x47ff, {0x7d2}, 0, 0},
+	/* Bit[12]=0x0 idle_sync_en */
+	{PCIE_REG0, 0x800, 0x1000, {0x0}, 0, 0},
+	/* Dtl Clamping disable and Dtl clamping Sel(6000ppm) */
+	{RX_REG2, 0x800, 0xf0, {0x70,}, 0, 0},
+	/* tximpcal_th and rximpcal_th */
+	{VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0},
+	/* DFE_STEP_FINE_FX[3:0] =0xa */
+	{DFE_REG0, 0x800, 0xa00f, {0x800a}, 0, 0},
+	/* DFE_EN and Dis Update control from pin disable */
+	{DFE_REG3, 0x800, 0xc000, {0x0}, 0, 0},
+	/* FFE Force FFE_REs and cap settings for Gen1 */
+	{G1_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0},
+	/* FFE Force FFE_REs and cap settings for Gen2 */
+	{G2_SETTINGS_3_REG, 0x800, 0xff, {0xbf}, 0, 0},
+	/* FE Force FFE_REs=4 and cap settings for Gen3n */
+	{G3_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0},
+	/* Set DFE Gen 3 Resolution to 3 */
+	{G3_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0},
+};
+
+struct op_params sgmii_electrical_config_serdes_rev1_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SGMII (1.25G), SGMII (3.125G),
+	 * wait_time, num_of_loops
+	 */
+	/* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9, 0x3c9}, 0, 0},
+	/* SQ_THRESH and FFE Setting */
+	{SQUELCH_FFE_SETTING_REG, 0x800, 0xfff, {0x8f, 0xbf}, 0, 0},
+	/* tximpcal_th and rximpcal_th */
+	{VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000, 0x4000}, 0, 0},
+};
+
+struct op_params sgmii_electrical_config_serdes_rev2_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, SGMII (1.25G), SGMII (3.125G),
+	 * wait_time, num_of_loops
+	 */
+	/* Set Slew_rate, Emph and Amp */
+	{G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8fa, 0x8fa}, 0, 0},
+	/* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9, 0x3c9}, 0, 0},
+	/* DTL_FLOOP_EN */
+	{RX_REG2, 0x800, 0x4, {0x0, 0x0}, 0, 0},
+	/* G1 FFE Setting Force, RES and CAP */
+	{G1_SETTINGS_3_REG, 0x800, 0xff, {0x8f, 0xbf}, 0, 0},
+	/* tximpcal_th and rximpcal_th */
+	{VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000, 0x3000}, 0, 0},
+};
+
+/*
+ * PEX and USB3
+ */
+
+/* PEX and USB3 - power up seq for Serdes Rev 1.2 */
+struct op_params pex_and_usb3_power_up_serdes_rev1_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+	 * wait_time, num_of_loops
+	 */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc7f806,
+	 {0x4471804, 0x4479804}, 0, 0},
+	{COMMON_PHY_CONFIGURATION2_REG, 0x28, 0x5c, {0x58, 0x58}, 0, 0},
+	{COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x3, {0x1, 0x1}, 0, 0},
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0xe000}, 0, 0},
+	{GLOBAL_CLK_CTRL, 0x800, 0xd, {0x5, 0x1}, 0, 0},
+	/* Ref clock source select */
+	{MISC_REG, 0x800, 0x4c0, {0x80, 0x4c0}, 0, 0}
+};
+
+/* PEX and USB3 - power up seq for Serdes Rev 2.1 */
+struct op_params pex_and_usb3_power_up_serdes_rev2_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+	 * wait_time, num_of_loops
+	 */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc7f806,
+	 {0x4471804, 0x4479804}, 0, 0},
+	{COMMON_PHY_CONFIGURATION2_REG, 0x28, 0x5c, {0x58, 0x58}, 0, 0},
+	{COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x3, {0x1, 0x1}, 0, 0},
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0xe000}, 0, 0},
+	{GLOBAL_CLK_CTRL, 0x800, 0xd, {0x5, 0x1}, 0, 0},
+	{GLOBAL_MISC_CTRL, 0x800, 0xc0, {0x0, NO_DATA}, 0, 0},
+	/* Ref clock source select */
+	{MISC_REG, 0x800, 0x4c0, {0x80, 0x4c0}, 0, 0}
+};
+
+/* PEX and USB3 - speed config seq */
+struct op_params pex_and_usb3_speed_config_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+	 * wait_time, num_of_loops
+	 */
+	/* Maximal PHY Generation Setting */
+	{INTERFACE_REG, 0x800, 0xc00, {0x400, 0x400, 0x400, 0x400, 0x400},
+	 0, 0},
+};
+
+struct op_params usb3_electrical_config_serdes_rev1_params[] = {
+	/* Spread Spectrum Clock Enable */
+	{LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0},
+	/* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */
+	{G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0},
+	/* tximpcal_th and rximpcal_th */
+	{VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000}, 0, 0},
+	/* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0},
+	/* FFE Setting Force, RES and CAP */
+	{SQUELCH_FFE_SETTING_REG, 0x800, 0xff, {0xef}, 0, 0},
+	/* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */
+	{RX_REG2, 0x800, 0xf0, {0x70}, 0, 0},
+	/* cal_rxclkalign90_ext_en and cal_os_ph_ext */
+	{CAL_REG6, 0x800, 0xff00, {0xd500}, 0, 0},
+	/* vco_cal_vth_sel */
+	{REF_REG0, 0x800, 0x38, {0x20}, 0, 0},
+};
+
+struct op_params usb3_electrical_config_serdes_rev2_params[] = {
+	/* Spread Spectrum Clock Enable */
+	{LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0},
+	/* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */
+	{G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0},
+	/* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0},
+	/* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */
+	{RX_REG2, 0x800, 0xf0, {0x70}, 0, 0},
+	/* vco_cal_vth_sel */
+	{REF_REG0, 0x800, 0x38, {0x20}, 0, 0},
+	/* Spread Spectrum Clock Enable */
+	{LANE_CFG5_REG, 0x800, 0x4, {0x4}, 0, 0},
+};
+
+/* PEX and USB3 - TX config seq */
+
+/*
+ * For PEXx1: the pex_and_usb3_tx_config_params1/2/3 configurations should run
+ *            one by one on the lane.
+ * For PEXx4: the pex_and_usb3_tx_config_params1/2/3 configurations should run
+ *            by setting each sequence for all 4 lanes.
+ */
+struct op_params pex_and_usb3_tx_config_params1[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+	 * wait_time, num_of_loops
+	 */
+	{GLOBAL_CLK_CTRL, 0x800, 0x1, {0x0, 0x0}, 0, 0},
+	/* 10ms delay */
+	{0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0},
+	/* os_ph_offset_force (align 90) */
+	{RX_REG3, 0x800, 0xff, {0xdc, NO_DATA}, 0, 0},
+	/* Set os_ph_valid */
+	{RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0},
+	/* Unset os_ph_valid */
+	{RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0},
+};
+
+struct op_params pex_and_usb3_tx_config_params2[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+	 * wait_time, num_of_loops
+	 */
+	/* Sft Reset pulse */
+	{RESET_DFE_REG, 0x800, 0x401, {0x401, 0x401}, 0, 0},
+};
+
+struct op_params pex_and_usb3_tx_config_params3[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+	 * wait_time, num_of_loops
+	 */
+	/* Sft Reset pulse */
+	{RESET_DFE_REG, 0x800, 0x401, {0x0, 0x0}, 0, 0},
+	/* 10ms delay */
+	{0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0}
+};
+
+/* PEX by 4 config seq */
+struct op_params pex_by4_config_params[] = {
+	/* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */
+	{GLOBAL_CLK_SRC_HI, 0x800, 0x7, {0x5, 0x0, 0x0, 0x2}, 0, 0},
+	/* Lane Alignment enable */
+	{LANE_ALIGN_REG0, 0x800, 0x1000, {0x0, 0x0, 0x0, 0x0}, 0, 0},
+	/* Max PLL phy config */
+	{CALIBRATION_CTRL_REG, 0x800, 0x1000, {0x1000, 0x1000, 0x1000, 0x1000},
+	 0, 0},
+	/* Max PLL pipe config */
+	{LANE_CFG1_REG, 0x800, 0x600, {0x600, 0x600, 0x600, 0x600}, 0, 0},
+};
+
+/* USB3 device donfig seq */
+struct op_params usb3_device_config_params[] = {
+	/* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */
+	{LANE_CFG4_REG, 0x800, 0x200, {0x200}, 0, 0}
+};
+
+/* PEX - electrical configuration seq Rev 1.2 */
+struct op_params pex_electrical_config_serdes_rev1_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+	 * num_of_loops
+	 */
+	/* G1_TX_SLEW_CTRL_EN and G1_TX_SLEW_RATE */
+	{G1_SETTINGS_0_REG, 0x800, 0xf000, {0xb000}, 0, 0},
+	/* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+	/* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+	/* CFG_DFE_EN_SEL */
+	{LANE_CFG4_REG, 0x800, 0x8, {0x8}, 0, 0},
+	/* FFE Setting Force, RES and CAP */
+	{SQUELCH_FFE_SETTING_REG, 0x800, 0xff, {0xaf}, 0, 0},
+	/* tximpcal_th and rximpcal_th */
+	{VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0},
+	/* cal_rxclkalign90_ext_en and cal_os_ph_ext */
+	{CAL_REG6, 0x800, 0xff00, {0xdc00}, 0, 0},
+};
+
+/* PEX - electrical configuration seq Rev 2.1 */
+struct op_params pex_electrical_config_serdes_rev2_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+	 * num_of_loops
+	 */
+	/* G1_TX_SLEW_CTRL_EN and G1_TX_SLEW_RATE */
+	{G1_SETTINGS_0_REG, 0x800, 0xf000, {0xb000}, 0, 0},
+	/* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+	/* G1 FFE Setting Force, RES and CAP */
+	{G1_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0},
+	/* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+	{G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+	/* G2 FFE Setting Force, RES and CAP */
+	{G2_SETTINGS_3_REG, 0x800, 0xff, {0xaf}, 0, 0},
+	/* G2 DFE resolution value */
+	{G2_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0},
+	/* DFE resolution force */
+	{DFE_REG0, 0x800, 0x8000, {0x8000}, 0, 0},
+	/* Tx amplitude for Tx Margin 0 */
+	{PCIE_REG1, 0x800, 0xf80, {0xd00}, 0, 0},
+	/* Tx_Emph value for -3.5d_b and -6d_b */
+	{PCIE_REG3, 0x800, 0xff00, {0xaf00}, 0, 0},
+	/* CFG_DFE_EN_SEL */
+	{LANE_CFG4_REG, 0x800, 0x8, {0x8}, 0, 0},
+	/* tximpcal_th and rximpcal_th */
+	{VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0},
+	/* Force receiver detected */
+	{LANE_CFG0_REG, 0x800, 0x8000, {0x8000}, 0, 0},
+};
+
+/* PEX - configuration seq for REF_CLOCK_25MHz */
+struct op_params pex_config_ref_clock25_m_hz[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+	 * num_of_loops
+	 */
+	/* Bits[4:0]=0x2 - REF_FREF_SEL */
+	{POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x2}, 0, 0},
+	/* Bit[10]=0x1   - REFCLK_SEL */
+	{MISC_REG, 0x800, 0x400, {0x400}, 0, 0},
+	/* Bits[7:0]=0x7 - CFG_PM_RXDLOZ_WAIT */
+	{GLOBAL_PM_CTRL, 0x800, 0xff, {0x7}, 0, 0},
+};
+
+/* PEX - configuration seq for REF_CLOCK_40MHz */
+struct op_params pex_config_ref_clock40_m_hz[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+	 * num_of_loops
+	 */
+	/* Bits[4:0]=0x3 - REF_FREF_SEL */
+	{POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x3}, 0, 0},
+	/* Bits[10]=0x1  - REFCLK_SEL */
+	{MISC_REG, 0x800, 0x400, {0x400}, 0, 0},
+	/* Bits[7:0]=0xc - CFG_PM_RXDLOZ_WAIT */
+	{GLOBAL_PM_CTRL, 0x800, 0xff, {0xc}, 0, 0},
+};
+
+/* PEX - configuration seq for REF_CLOCK_100MHz */
+struct op_params pex_config_ref_clock100_m_hz[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+	 * num_of_loops
+	 */
+	/* Bits[4:0]=0x0  - REF_FREF_SEL */
+	{POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x0}, 0, 0},
+	/* Bit[10]=0x0    - REFCLK_SEL */
+	{MISC_REG, 0x800, 0x400, {0x0}, 0, 0},
+	/* Bits[7:0]=0x1e - CFG_PM_RXDLOZ_WAIT */
+	{GLOBAL_PM_CTRL, 0x800, 0xff, {0x1e}, 0, 0},
+};
+
+/*
+ *    USB2
+ */
+
+struct op_params usb2_power_up_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, USB2 data, wait_time,
+	 * num_of_loops
+	 */
+	/* Init phy 0 */
+	{0x18440, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0},
+	/* Init phy 1 */
+	{0x18444, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0},
+	/* Init phy 2 */
+	{0x18448, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0},
+	/* Phy offset 0x0 - PLL_CONTROL0  */
+	{0xc0000, 0x0 /*NA*/, 0xffffffff, {0x40605205}, 0, 0},
+	{0xc001c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0},
+	{0xc201c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0},
+	{0xc401c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0},
+	/* Phy offset 0x1 - PLL_CONTROL1 */
+	{0xc0004, 0x0 /*NA*/, 0x1, {0x1}, 0, 0},
+	/* Phy0 register 3  - TX Channel control 0 */
+	{0xc000c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
+	/* Phy0 register 3  - TX Channel control 0 */
+	{0xc200c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
+	/* Phy0 register 3  - TX Channel control 0 */
+	{0xc400c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
+	/* Decrease the amplitude of the low speed eye to meet the spec */
+	{0xc000c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	{0xc200c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	{0xc400c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	/* Change the High speed impedance threshold */
+	{0xc0008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH << 8}, 0, 0},
+	{0xc2008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH << 8}, 0, 0},
+	{0xc4008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH << 8}, 0, 0},
+	/* Change the squelch level of the receiver to meet the receiver electrical measurements (squelch and receiver sensitivity tests) */
+	{0xc0014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	{0xc2014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	{0xc4014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	/* Check PLLCAL_DONE is set and IMPCAL_DONE is set */
+	{0xc0008, 0x0 /*NA*/, 0x80800000, {0x80800000}, 1, 1000},
+	/* Check REG_SQCAL_DONE  is set */
+	{0xc0018, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000},
+	/* Check PLL_READY  is set */
+	{0xc0000, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000},
+	/* Start calibrate of high seed impedance */
+	{0xc0008, 0x0 /*NA*/, 0x2000, {0x2000}, 0, 0},
+	{0x0, 0x0 /*NA*/, 0x0, {0x0}, 10, 0},
+	/* De-assert  the calibration signal */
+	{0xc0008, 0x0 /*NA*/, 0x2000, {0x0}, 0, 0},
+};
+
+/*
+ *    QSGMII
+ */
+
+/* QSGMII - power up seq */
+struct op_params qsgmii_port_power_up_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+	 * num_of_loops
+	 */
+	/* Connect the QSGMII to Gigabit Ethernet units */
+	{QSGMII_CONTROL_REG1, 0x0, 0x40000000, {0x40000000}, 0, 0},
+	/* Power Up */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0xf0006, {0x80002}, 0, 0},
+	/* Unreset */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000}, 0, 0},
+	/* Phy Selector */
+	{POWER_AND_PLL_CTRL_REG, 0x800, 0xff, {0xfc81}, 0, 0},
+	/* Ref clock source select */
+	{MISC_REG, 0x800, 0x4c0, {0x480}, 0, 0}
+};
+
+/* QSGMII - speed config seq */
+struct op_params qsgmii_port_speed_config_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+	 * num_of_loops
+	 */
+	/* Baud Rate */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc00000, {0xcc00000}, 0, 0},
+	/* Phy Gen RX and TX */
+	{ISOLATE_REG, 0x800, 0xff, {0x33}, 0, 0},
+	/* Bus Width */
+	{LOOPBACK_REG, 0x800, 0xe, {0x2}, 0, 0}
+};
+
+/* QSGMII - Select electrical param seq */
+struct op_params qsgmii_port_electrical_config_params[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+	 * num_of_loops
+	 */
+	/* Slew rate and emphasis */
+	{G1_SETTINGS_0_REG, 0x800, 0x8000, {0x0}, 0, 0}
+};
+
+/* QSGMII - TX config seq */
+struct op_params qsgmii_port_tx_config_params1[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+	 * num_of_loops
+	 */
+	{GLUE_REG, 0x800, 0x1800, {0x800}, 0, 0},
+	/* Sft Reset pulse */
+	{RESET_DFE_REG, 0x800, 0x401, {0x401}, 0, 0},
+	/* Sft Reset pulse */
+	{RESET_DFE_REG, 0x800, 0x401, {0x0}, 0, 0},
+	/* Lane align */
+	{LANE_ALIGN_REG0, 0x800, 0x1000, {0x1000}, 0, 0},
+	/* Power up PLL, RX and TX */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x70000, {0x70000}, 0, 0},
+	/* Tx driver output idle */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x80000, {0x80000}, 0, 0}
+};
+
+struct op_params qsgmii_port_tx_config_params2[] = {
+	/*
+	 * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+	 * num_of_loops
+	 */
+	/* Wait for PHY power up sequence to finish */
+	{COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc}, 10, 1000},
+	/* Assert Rx Init and Tx driver output valid */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40080000, {0x40000000}, 0, 0},
+	/* Wait for PHY power up sequence to finish */
+	{COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1}, 1, 1000},
+	/* De-assert Rx Init */
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {0x0}, 0, 0}
+};
+
+/* SERDES_POWER_DOWN */
+struct op_params serdes_power_down_params[] = {
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, (0xf << 11), {(0x3 << 11)},
+	 0, 0},
+	{COMMON_PHY_CONFIGURATION1_REG, 0x28, (0x7 << 16), {0}, 0, 0}
+};
+
+/*
+ * hws_ctrl_serdes_rev_get
+ *
+ * DESCRIPTION: Get the Serdes revision number
+ *
+ * INPUT: config_field - Field description enum
+ *
+ * OUTPUT: None
+ *
+ * RETURN:
+ *		8bit Serdes revision number
+ */
+u8 hws_ctrl_serdes_rev_get(void)
+{
+	/* for A38x-Z1 */
+	if (sys_env_device_rev_get() == MV_88F68XX_Z1_ID)
+		return MV_SERDES_REV_1_2;
+
+	/* for A39x-Z1, A38x-A0 */
+	return MV_SERDES_REV_2_1;
+}
+
+u32 hws_serdes_topology_verify(enum serdes_type serdes_type, u32 serdes_id,
+			       enum serdes_mode serdes_mode)
+{
+	u32 test_result = 0;
+	u8 serd_max_num, unit_numb;
+	enum unit_id unit_id;
+
+	if (serdes_type > RXAUI) {
+		printf("%s: Warning: Wrong serdes type %s serdes#%d\n",
+		       __func__, serdes_type_to_string[serdes_type], serdes_id);
+		return MV_FAIL;
+	}
+
+	unit_id = serdes_type_to_unit_info[serdes_type].serdes_unit_id;
+	unit_numb = serdes_type_to_unit_info[serdes_type].serdes_unit_num;
+	serd_max_num = sys_env_unit_max_num_get(unit_id);
+
+	/* if didn't exceed amount of required Serdes lanes for current type */
+	if (serdes_lane_in_use_count[unit_id][unit_numb] != 0) {
+		/* update amount of required Serdes lanes for current type */
+		serdes_lane_in_use_count[unit_id][unit_numb]--;
+
+		/*
+		 * If reached the exact amount of required Serdes lanes for
+		 * current type
+		 */
+		if (serdes_lane_in_use_count[unit_id][unit_numb] == 0) {
+			if (((serdes_type <= PEX3)) &&
+			    ((serdes_mode == PEX_END_POINT_X4) ||
+			     (serdes_mode == PEX_ROOT_COMPLEX_X4))) {
+				/* PCiex4 uses 2 SerDes */
+				serdes_unit_count[PEX_UNIT_ID] += 2;
+			} else {
+				serdes_unit_count[unit_id]++;
+			}
+
+			/* test SoC unit count limitation */
+			if (serdes_unit_count[unit_id] > serd_max_num) {
+				test_result = WRONG_NUMBER_OF_UNITS;
+			} else if (unit_numb >= serd_max_num) {
+				/* test SoC unit number limitation */
+				test_result = UNIT_NUMBER_VIOLATION;
+			}
+		}
+	} else {
+		test_result = SERDES_ALREADY_IN_USE;
+	}
+
+	if (test_result == SERDES_ALREADY_IN_USE) {
+		printf("%s: Error: serdes lane %d is configured to type %s: type already in use\n",
+		       __func__, serdes_id,
+		       serdes_type_to_string[serdes_type]);
+		return MV_FAIL;
+	} else if (test_result == WRONG_NUMBER_OF_UNITS) {
+		printf("%s: Warning: serdes lane %d is set to type %s.\n",
+		       __func__, serdes_id,
+		       serdes_type_to_string[serdes_type]);
+		printf("%s: Maximum supported lanes are already set to this type (limit = %d)\n",
+		       __func__, serd_max_num);
+		return MV_FAIL;
+	} else if (test_result == UNIT_NUMBER_VIOLATION) {
+		printf("%s: Warning: serdes lane %d type is %s: current device support only %d units of this type.\n",
+		       __func__, serdes_id,
+		       serdes_type_to_string[serdes_type],
+		       serd_max_num);
+		return MV_FAIL;
+	}
+
+	return MV_OK;
+}
+
+void hws_serdes_xaui_topology_verify(void)
+{
+	/*
+	 * If XAUI is in use - serdes_lane_in_use_count has to be = 0;
+	 * if it is not in use hast be = 4
+	 */
+	if ((serdes_lane_in_use_count[XAUI_UNIT_ID][0] != 0) &&
+	    (serdes_lane_in_use_count[XAUI_UNIT_ID][0] != 4)) {
+		printf("%s: Warning: wrong number of lanes is set to XAUI - %d\n",
+		       __func__, serdes_lane_in_use_count[XAUI_UNIT_ID][0]);
+		printf("%s: XAUI has to be defined on 4 lanes\n", __func__);
+	}
+
+	/*
+	 * If RXAUI is in use - serdes_lane_in_use_count has to be = 0;
+	 * if it is not in use hast be = 2
+	 */
+	if ((serdes_lane_in_use_count[RXAUI_UNIT_ID][0] != 0) &&
+	    (serdes_lane_in_use_count[RXAUI_UNIT_ID][0] != 2)) {
+		printf("%s: Warning: wrong number of lanes is set to RXAUI - %d\n",
+		       __func__, serdes_lane_in_use_count[RXAUI_UNIT_ID][0]);
+		printf("%s: RXAUI has to be defined on 2 lanes\n", __func__);
+	}
+}
+
+int hws_serdes_seq_db_init(void)
+{
+	u8 serdes_rev = hws_ctrl_serdes_rev_get();
+
+	DEBUG_INIT_FULL_S("\n### serdes_seq38x_init ###\n");
+
+	if (serdes_rev == MV_SERDES_REV_NA) {
+		printf("hws_serdes_seq_db_init: serdes revision number is not supported\n");
+		return MV_NOT_SUPPORTED;
+	}
+
+	/* SATA_PORT_0_ONLY_POWER_UP_SEQ sequence init */
+	serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].op_params_ptr =
+	    sata_port0_power_up_params;
+	serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].cfg_seq_size =
+	    sizeof(sata_port0_power_up_params) / sizeof(struct op_params);
+	serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].data_arr_idx = SATA;
+
+	/* SATA_PORT_1_ONLY_POWER_UP_SEQ sequence init */
+	serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].op_params_ptr =
+	    sata_port1_power_up_params;
+	serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].cfg_seq_size =
+	    sizeof(sata_port1_power_up_params) / sizeof(struct op_params);
+	serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].data_arr_idx = SATA;
+
+	/* SATA_POWER_UP_SEQ sequence init */
+	serdes_seq_db[SATA_POWER_UP_SEQ].op_params_ptr =
+	    sata_and_sgmii_power_up_params;
+	serdes_seq_db[SATA_POWER_UP_SEQ].cfg_seq_size =
+	    sizeof(sata_and_sgmii_power_up_params) / sizeof(struct op_params);
+	serdes_seq_db[SATA_POWER_UP_SEQ].data_arr_idx = SATA;
+
+	/* SATA_1_5_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].op_params_ptr =
+	    sata_and_sgmii_speed_config_params;
+	serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(sata_and_sgmii_speed_config_params) /
+		sizeof(struct op_params);
+	serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].data_arr_idx = SATA;
+
+	/* SATA_3_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].op_params_ptr =
+	    sata_and_sgmii_speed_config_params;
+	serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(sata_and_sgmii_speed_config_params) /
+		sizeof(struct op_params);
+	serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].data_arr_idx = SATA;
+
+	/* SATA_6_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].op_params_ptr =
+	    sata_and_sgmii_speed_config_params;
+	serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(sata_and_sgmii_speed_config_params) /
+		sizeof(struct op_params);
+	serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].data_arr_idx = SATA;
+
+	/* SATA_ELECTRICAL_CONFIG_SEQ seq sequence init */
+	if (serdes_rev == MV_SERDES_REV_1_2) {
+		serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    sata_electrical_config_serdes_rev1_params;
+		serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(sata_electrical_config_serdes_rev1_params) /
+		    sizeof(struct op_params);
+	} else {
+		serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    sata_electrical_config_serdes_rev2_params;
+		serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(sata_electrical_config_serdes_rev2_params) /
+		    sizeof(struct op_params);
+	}
+	serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].data_arr_idx = SATA;
+
+	/* SATA_TX_CONFIG_SEQ sequence init */
+	serdes_seq_db[SATA_TX_CONFIG_SEQ1].op_params_ptr =
+	    sata_and_sgmii_tx_config_params1;
+	serdes_seq_db[SATA_TX_CONFIG_SEQ1].cfg_seq_size =
+	    sizeof(sata_and_sgmii_tx_config_params1) / sizeof(struct op_params);
+	serdes_seq_db[SATA_TX_CONFIG_SEQ1].data_arr_idx = SATA;
+
+	/* SATA_PORT_0_ONLY_TX_CONFIG_SEQ sequence init */
+	serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].op_params_ptr =
+	    sata_port0_tx_config_params;
+	serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(sata_port0_tx_config_params) / sizeof(struct op_params);
+	serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].data_arr_idx = SATA;
+
+	/* SATA_PORT_1_ONLY_TX_CONFIG_SEQ sequence init */
+	serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].op_params_ptr =
+	    sata_port1_tx_config_params;
+	serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(sata_port1_tx_config_params) / sizeof(struct op_params);
+	serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].data_arr_idx = SATA;
+
+	/* SATA_TX_CONFIG_SEQ2 sequence init */
+	if (serdes_rev == MV_SERDES_REV_1_2) {
+		serdes_seq_db[SATA_TX_CONFIG_SEQ2].op_params_ptr =
+		    sata_and_sgmii_tx_config_serdes_rev1_params2;
+		serdes_seq_db[SATA_TX_CONFIG_SEQ2].cfg_seq_size =
+		    sizeof(sata_and_sgmii_tx_config_serdes_rev1_params2) /
+		    sizeof(struct op_params);
+	} else {
+		serdes_seq_db[SATA_TX_CONFIG_SEQ2].op_params_ptr =
+		    sata_and_sgmii_tx_config_serdes_rev2_params2;
+		serdes_seq_db[SATA_TX_CONFIG_SEQ2].cfg_seq_size =
+		    sizeof(sata_and_sgmii_tx_config_serdes_rev2_params2) /
+		    sizeof(struct op_params);
+	}
+	serdes_seq_db[SATA_TX_CONFIG_SEQ2].data_arr_idx = SATA;
+
+	/* SGMII_POWER_UP_SEQ sequence init */
+	serdes_seq_db[SGMII_POWER_UP_SEQ].op_params_ptr =
+	    sata_and_sgmii_power_up_params;
+	serdes_seq_db[SGMII_POWER_UP_SEQ].cfg_seq_size =
+	    sizeof(sata_and_sgmii_power_up_params) / sizeof(struct op_params);
+	serdes_seq_db[SGMII_POWER_UP_SEQ].data_arr_idx = SGMII;
+
+	/* SGMII_1_25_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].op_params_ptr =
+	    sata_and_sgmii_speed_config_params;
+	serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(sata_and_sgmii_speed_config_params) /
+		sizeof(struct op_params);
+	serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].data_arr_idx = SGMII;
+
+	/* SGMII_3_125_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].op_params_ptr =
+	    sata_and_sgmii_speed_config_params;
+	serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(sata_and_sgmii_speed_config_params) /
+		sizeof(struct op_params);
+	serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].data_arr_idx = SGMII_3_125;
+
+	/* SGMII_ELECTRICAL_CONFIG_SEQ seq sequence init */
+	if (serdes_rev == MV_SERDES_REV_1_2) {
+		serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    sgmii_electrical_config_serdes_rev1_params;
+		serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(sgmii_electrical_config_serdes_rev1_params) /
+		    sizeof(struct op_params);
+	} else {
+		serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    sgmii_electrical_config_serdes_rev2_params;
+		serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(sgmii_electrical_config_serdes_rev2_params) /
+		    sizeof(struct op_params);
+	}
+	serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].data_arr_idx = SGMII;
+
+	/* SGMII_TX_CONFIG_SEQ sequence init */
+	serdes_seq_db[SGMII_TX_CONFIG_SEQ1].op_params_ptr =
+	    sata_and_sgmii_tx_config_params1;
+	serdes_seq_db[SGMII_TX_CONFIG_SEQ1].cfg_seq_size =
+	    sizeof(sata_and_sgmii_tx_config_params1) / sizeof(struct op_params);
+	serdes_seq_db[SGMII_TX_CONFIG_SEQ1].data_arr_idx = SGMII;
+
+	/* SGMII_TX_CONFIG_SEQ sequence init */
+	if (serdes_rev == MV_SERDES_REV_1_2) {
+		serdes_seq_db[SGMII_TX_CONFIG_SEQ2].op_params_ptr =
+		    sata_and_sgmii_tx_config_serdes_rev1_params2;
+		serdes_seq_db[SGMII_TX_CONFIG_SEQ2].cfg_seq_size =
+		    sizeof(sata_and_sgmii_tx_config_serdes_rev1_params2) /
+		    sizeof(struct op_params);
+	} else {
+		serdes_seq_db[SGMII_TX_CONFIG_SEQ2].op_params_ptr =
+		    sata_and_sgmii_tx_config_serdes_rev2_params2;
+		serdes_seq_db[SGMII_TX_CONFIG_SEQ2].cfg_seq_size =
+		    sizeof(sata_and_sgmii_tx_config_serdes_rev2_params2) /
+		    sizeof(struct op_params);
+	}
+	serdes_seq_db[SGMII_TX_CONFIG_SEQ2].data_arr_idx = SGMII;
+
+	/* PEX_POWER_UP_SEQ sequence init */
+	if (serdes_rev == MV_SERDES_REV_1_2) {
+		serdes_seq_db[PEX_POWER_UP_SEQ].op_params_ptr =
+		    pex_and_usb3_power_up_serdes_rev1_params;
+		serdes_seq_db[PEX_POWER_UP_SEQ].cfg_seq_size =
+		    sizeof(pex_and_usb3_power_up_serdes_rev1_params) /
+		    sizeof(struct op_params);
+	} else {
+		serdes_seq_db[PEX_POWER_UP_SEQ].op_params_ptr =
+		    pex_and_usb3_power_up_serdes_rev2_params;
+		serdes_seq_db[PEX_POWER_UP_SEQ].cfg_seq_size =
+		    sizeof(pex_and_usb3_power_up_serdes_rev2_params) /
+		    sizeof(struct op_params);
+	}
+	serdes_seq_db[PEX_POWER_UP_SEQ].data_arr_idx = PEX;
+
+	/* PEX_2_5_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].op_params_ptr =
+	    pex_and_usb3_speed_config_params;
+	serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params);
+	serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].data_arr_idx =
+		PEXSERDES_SPEED_2_5_GBPS;
+
+	/* PEX_5_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].op_params_ptr =
+	    pex_and_usb3_speed_config_params;
+	serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params);
+	serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].data_arr_idx =
+		PEXSERDES_SPEED_5_GBPS;
+
+	/* PEX_ELECTRICAL_CONFIG_SEQ seq sequence init */
+	if (serdes_rev == MV_SERDES_REV_1_2) {
+		serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    pex_electrical_config_serdes_rev1_params;
+		serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(pex_electrical_config_serdes_rev1_params) /
+		    sizeof(struct op_params);
+	} else {
+		serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    pex_electrical_config_serdes_rev2_params;
+		serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(pex_electrical_config_serdes_rev2_params) /
+		    sizeof(struct op_params);
+	}
+	serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].data_arr_idx = PEX;
+
+	/* PEX_TX_CONFIG_SEQ1 sequence init */
+	serdes_seq_db[PEX_TX_CONFIG_SEQ1].op_params_ptr =
+	    pex_and_usb3_tx_config_params1;
+	serdes_seq_db[PEX_TX_CONFIG_SEQ1].cfg_seq_size =
+	    sizeof(pex_and_usb3_tx_config_params1) / sizeof(struct op_params);
+	serdes_seq_db[PEX_TX_CONFIG_SEQ1].data_arr_idx = PEX;
+
+	/* PEX_TX_CONFIG_SEQ2 sequence init */
+	serdes_seq_db[PEX_TX_CONFIG_SEQ2].op_params_ptr =
+	    pex_and_usb3_tx_config_params2;
+	serdes_seq_db[PEX_TX_CONFIG_SEQ2].cfg_seq_size =
+	    sizeof(pex_and_usb3_tx_config_params2) / sizeof(struct op_params);
+	serdes_seq_db[PEX_TX_CONFIG_SEQ2].data_arr_idx = PEX;
+
+	/* PEX_TX_CONFIG_SEQ3 sequence init */
+	serdes_seq_db[PEX_TX_CONFIG_SEQ3].op_params_ptr =
+	    pex_and_usb3_tx_config_params3;
+	serdes_seq_db[PEX_TX_CONFIG_SEQ3].cfg_seq_size =
+	    sizeof(pex_and_usb3_tx_config_params3) / sizeof(struct op_params);
+	serdes_seq_db[PEX_TX_CONFIG_SEQ3].data_arr_idx = PEX;
+
+	/* PEX_BY_4_CONFIG_SEQ sequence init */
+	serdes_seq_db[PEX_BY_4_CONFIG_SEQ].op_params_ptr =
+	    pex_by4_config_params;
+	serdes_seq_db[PEX_BY_4_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(pex_by4_config_params) / sizeof(struct op_params);
+	serdes_seq_db[PEX_BY_4_CONFIG_SEQ].data_arr_idx = PEX;
+
+	/* PEX_CONFIG_REF_CLOCK_25MHZ_SEQ sequence init */
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].op_params_ptr =
+	    pex_config_ref_clock25_m_hz;
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].cfg_seq_size =
+	    sizeof(pex_config_ref_clock25_m_hz) / sizeof(struct op_params);
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].data_arr_idx = PEX;
+
+	/* PEX_ELECTRICAL_CONFIG_REF_CLOCK_40MHZ_SEQ sequence init */
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].op_params_ptr =
+	    pex_config_ref_clock40_m_hz;
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].cfg_seq_size =
+	    sizeof(pex_config_ref_clock40_m_hz) / sizeof(struct op_params);
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].data_arr_idx = PEX;
+
+	/* PEX_CONFIG_REF_CLOCK_100MHZ_SEQ sequence init */
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].op_params_ptr =
+	    pex_config_ref_clock100_m_hz;
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].cfg_seq_size =
+	    sizeof(pex_config_ref_clock100_m_hz) / sizeof(struct op_params);
+	serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].data_arr_idx = PEX;
+
+	/* USB3_POWER_UP_SEQ sequence init */
+	if (serdes_rev == MV_SERDES_REV_1_2) {
+		serdes_seq_db[USB3_POWER_UP_SEQ].op_params_ptr =
+		    pex_and_usb3_power_up_serdes_rev1_params;
+		serdes_seq_db[USB3_POWER_UP_SEQ].cfg_seq_size =
+		    sizeof(pex_and_usb3_power_up_serdes_rev1_params) /
+		    sizeof(struct op_params);
+	} else {
+		serdes_seq_db[USB3_POWER_UP_SEQ].op_params_ptr =
+		    pex_and_usb3_power_up_serdes_rev2_params;
+		serdes_seq_db[USB3_POWER_UP_SEQ].cfg_seq_size =
+		    sizeof(pex_and_usb3_power_up_serdes_rev2_params) /
+		    sizeof(struct op_params);
+	}
+	serdes_seq_db[USB3_POWER_UP_SEQ].data_arr_idx = USB3;
+
+	/* USB3_HOST_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].op_params_ptr =
+	    pex_and_usb3_speed_config_params;
+	serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params);
+	serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].data_arr_idx =
+	    USB3SERDES_SPEED_5_GBPS_HOST;
+
+	/* USB3_DEVICE_SPEED_CONFIG_SEQ sequence init */
+	serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].op_params_ptr =
+	    pex_and_usb3_speed_config_params;
+	serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params);
+	serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].data_arr_idx =
+	    USB3SERDES_SPEED_5_GBPS_DEVICE;
+
+	/* USB3_ELECTRICAL_CONFIG_SEQ seq sequence init */
+	if (serdes_rev == MV_SERDES_REV_1_2) {
+		serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    usb3_electrical_config_serdes_rev1_params;
+		serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(usb3_electrical_config_serdes_rev1_params) /
+		    sizeof(struct op_params);
+	} else {
+		serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    usb3_electrical_config_serdes_rev2_params;
+		serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(usb3_electrical_config_serdes_rev2_params) /
+		    sizeof(struct op_params);
+	}
+	serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].data_arr_idx = USB3;
+
+	/* USB3_TX_CONFIG_SEQ sequence init */
+	serdes_seq_db[USB3_TX_CONFIG_SEQ1].op_params_ptr =
+	    pex_and_usb3_tx_config_params1;
+	serdes_seq_db[USB3_TX_CONFIG_SEQ1].cfg_seq_size =
+	    sizeof(pex_and_usb3_tx_config_params1) / sizeof(struct op_params);
+	serdes_seq_db[USB3_TX_CONFIG_SEQ1].data_arr_idx = USB3;
+
+	/* USB3_TX_CONFIG_SEQ sequence init */
+	serdes_seq_db[USB3_TX_CONFIG_SEQ2].op_params_ptr =
+	    pex_and_usb3_tx_config_params2;
+	serdes_seq_db[USB3_TX_CONFIG_SEQ2].cfg_seq_size =
+	    sizeof(pex_and_usb3_tx_config_params2) / sizeof(struct op_params);
+	serdes_seq_db[USB3_TX_CONFIG_SEQ2].data_arr_idx = USB3;
+
+	/* USB3_TX_CONFIG_SEQ sequence init */
+	serdes_seq_db[USB3_TX_CONFIG_SEQ3].op_params_ptr =
+	    pex_and_usb3_tx_config_params3;
+	serdes_seq_db[USB3_TX_CONFIG_SEQ3].cfg_seq_size =
+	    sizeof(pex_and_usb3_tx_config_params3) / sizeof(struct op_params);
+	serdes_seq_db[USB3_TX_CONFIG_SEQ3].data_arr_idx = USB3;
+
+	/* USB2_POWER_UP_SEQ sequence init */
+	serdes_seq_db[USB2_POWER_UP_SEQ].op_params_ptr = usb2_power_up_params;
+	serdes_seq_db[USB2_POWER_UP_SEQ].cfg_seq_size =
+	    sizeof(usb2_power_up_params) / sizeof(struct op_params);
+	serdes_seq_db[USB2_POWER_UP_SEQ].data_arr_idx = 0;
+
+	/* USB3_DEVICE_CONFIG_SEQ sequence init */
+	serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].op_params_ptr =
+	    usb3_device_config_params;
+	serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].cfg_seq_size =
+	    sizeof(usb3_device_config_params) / sizeof(struct op_params);
+	serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].data_arr_idx = 0;	/* Not relevant */
+
+	/* SERDES_POWER_DOWN_SEQ sequence init */
+	serdes_seq_db[SERDES_POWER_DOWN_SEQ].op_params_ptr =
+	    serdes_power_down_params;
+	serdes_seq_db[SERDES_POWER_DOWN_SEQ].cfg_seq_size =
+	    sizeof(serdes_power_down_params) /
+		sizeof(struct op_params);
+	serdes_seq_db[SERDES_POWER_DOWN_SEQ].data_arr_idx = FIRST_CELL;
+
+	if (serdes_rev == MV_SERDES_REV_2_1) {
+		/* QSGMII_POWER_UP_SEQ sequence init */
+		serdes_seq_db[QSGMII_POWER_UP_SEQ].op_params_ptr =
+		    qsgmii_port_power_up_params;
+		serdes_seq_db[QSGMII_POWER_UP_SEQ].cfg_seq_size =
+		    sizeof(qsgmii_port_power_up_params) /
+			sizeof(struct op_params);
+		serdes_seq_db[QSGMII_POWER_UP_SEQ].data_arr_idx =
+		    QSGMII_SEQ_IDX;
+
+		/* QSGMII_5_SPEED_CONFIG_SEQ sequence init */
+		serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].op_params_ptr =
+		    qsgmii_port_speed_config_params;
+		serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(qsgmii_port_speed_config_params) /
+			sizeof(struct op_params);
+		serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].data_arr_idx =
+		    QSGMII_SEQ_IDX;
+
+		/* QSGMII_ELECTRICAL_CONFIG_SEQ seq sequence init */
+		serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+		    qsgmii_port_electrical_config_params;
+		serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+		    sizeof(qsgmii_port_electrical_config_params) /
+		    sizeof(struct op_params);
+		serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].data_arr_idx =
+		    QSGMII_SEQ_IDX;
+
+		/* QSGMII_TX_CONFIG_SEQ sequence init */
+		serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].op_params_ptr =
+		    qsgmii_port_tx_config_params1;
+		serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].cfg_seq_size =
+		    sizeof(qsgmii_port_tx_config_params1) /
+			sizeof(struct op_params);
+		serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].data_arr_idx =
+		    QSGMII_SEQ_IDX;
+
+		/* QSGMII_TX_CONFIG_SEQ sequence init */
+		serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].op_params_ptr =
+		    qsgmii_port_tx_config_params2;
+		serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].cfg_seq_size =
+		    sizeof(qsgmii_port_tx_config_params2) /
+			sizeof(struct op_params);
+		serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].data_arr_idx =
+		    QSGMII_SEQ_IDX;
+	}
+
+	return MV_OK;
+}
+
+enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type,
+					      enum serdes_speed baud_rate)
+{
+	enum serdes_seq seq_id = SERDES_LAST_SEQ;
+
+	DEBUG_INIT_FULL_S("\n### serdes_type_and_speed_to_speed_seq ###\n");
+	switch (serdes_type) {
+	case PEX0:
+	case PEX1:
+	case PEX2:
+	case PEX3:
+		if (baud_rate == SERDES_SPEED_2_5_GBPS)
+			seq_id = PEX_2_5_SPEED_CONFIG_SEQ;
+		else if (baud_rate == SERDES_SPEED_5_GBPS)
+			seq_id = PEX_5_SPEED_CONFIG_SEQ;
+		break;
+	case USB3_HOST0:
+	case USB3_HOST1:
+		if (baud_rate == SERDES_SPEED_5_GBPS)
+			seq_id = USB3_HOST_SPEED_CONFIG_SEQ;
+		break;
+	case USB3_DEVICE:
+		if (baud_rate == SERDES_SPEED_5_GBPS)
+			seq_id = USB3_DEVICE_SPEED_CONFIG_SEQ;
+		break;
+	case SATA0:
+	case SATA1:
+	case SATA2:
+	case SATA3:
+		if (baud_rate == SERDES_SPEED_1_5_GBPS)
+			seq_id = SATA_1_5_SPEED_CONFIG_SEQ;
+		else if (baud_rate == SERDES_SPEED_3_GBPS)
+			seq_id = SATA_3_SPEED_CONFIG_SEQ;
+		else if (baud_rate == SERDES_SPEED_6_GBPS)
+			seq_id = SATA_6_SPEED_CONFIG_SEQ;
+		break;
+	case SGMII0:
+	case SGMII1:
+	case SGMII2:
+		if (baud_rate == SERDES_SPEED_1_25_GBPS)
+			seq_id = SGMII_1_25_SPEED_CONFIG_SEQ;
+		else if (baud_rate == SERDES_SPEED_3_125_GBPS)
+			seq_id = SGMII_3_125_SPEED_CONFIG_SEQ;
+		break;
+	case QSGMII:
+		seq_id = QSGMII_5_SPEED_CONFIG_SEQ;
+		break;
+	default:
+		return SERDES_LAST_SEQ;
+	}
+
+	return seq_id;
+}
+
+static void print_topology_details(const struct serdes_map *serdes_map,
+								u8 count)
+{
+	u32 lane_num;
+
+	DEBUG_INIT_S("board SerDes lanes topology details:\n");
+
+	DEBUG_INIT_S(" | Lane # | Speed |  Type       |\n");
+	DEBUG_INIT_S(" --------------------------------\n");
+	for (lane_num = 0; lane_num < count; lane_num++) {
+		if (serdes_map[lane_num].serdes_type == DEFAULT_SERDES)
+			continue;
+		DEBUG_INIT_S(" |   ");
+		DEBUG_INIT_D(hws_get_physical_serdes_num(lane_num), 1);
+		DEBUG_INIT_S("    |   ");
+		DEBUG_INIT_D(serdes_map[lane_num].serdes_speed, 2);
+		DEBUG_INIT_S("   | ");
+		DEBUG_INIT_S((char *)
+			     serdes_type_to_string[serdes_map[lane_num].
+						   serdes_type]);
+		DEBUG_INIT_S("\t|\n");
+	}
+	DEBUG_INIT_S(" --------------------------------\n");
+}
+
+int hws_pre_serdes_init_config(void)
+{
+	u32 data;
+
+	/*
+	 * Configure Core PLL
+	 */
+	/*
+	 * set PLL parameters
+	 * bits[2:0]  =0x3 (Core-PLL Kdiv)
+	 * bits[20:12]=0x9f (Core-PLL Ndiv)
+	 * bits[24:21]=0x7(Core-PLL VCO Band)
+	 * bits[28:25]=0x1(Core-PLL Rlf)
+	 * bits[31:29]=0x2(Core-PLL charge-pump adjust)
+	 */
+	reg_write(CORE_PLL_PARAMETERS_REG, 0x42e9f003);
+
+	/* Enable PLL Configuration */
+	data = reg_read(CORE_PLL_CONFIG_REG);
+	data = SET_BIT(data, 9);
+	reg_write(CORE_PLL_CONFIG_REG, data);
+
+	return MV_OK;
+}
+
+int serdes_phy_config(void)
+{
+	struct serdes_map *serdes_map;
+	u8 serdes_count;
+
+	DEBUG_INIT_FULL_S("\n### ctrl_high_speed_serdes_phy_config ###\n");
+
+	DEBUG_INIT_S("High speed PHY - Version: ");
+	DEBUG_INIT_S(SERDES_VERSION);
+	DEBUG_INIT_S("\n");
+
+	/* Init serdes sequences DB */
+	if (hws_serdes_seq_init() != MV_OK) {
+		printf("hws_ctrl_high_speed_serdes_phy_config: Error: Serdes initialization fail\n");
+		return MV_FAIL;
+	}
+
+	/* Board topology load */
+	DEBUG_INIT_FULL_S
+	    ("ctrl_high_speed_serdes_phy_config: Loading board topology..\n");
+	CHECK_STATUS(hws_board_topology_load(&serdes_map, &serdes_count));
+	if (serdes_count > hws_serdes_get_max_lane()) {
+		printf("Error: too many serdes lanes specified by board\n");
+		return MV_FAIL;
+	}
+
+	/* print topology */
+	print_topology_details(serdes_map, serdes_count);
+	CHECK_STATUS(hws_pre_serdes_init_config());
+
+	/* Power-Up sequence */
+	DEBUG_INIT_FULL_S
+		("ctrl_high_speed_serdes_phy_config: Starting serdes power up sequence\n");
+
+	CHECK_STATUS(hws_power_up_serdes_lanes(serdes_map, serdes_count));
+
+	DEBUG_INIT_FULL_S
+		("\n### ctrl_high_speed_serdes_phy_config ended successfully ###\n");
+
+	DEBUG_INIT_S(ENDED_OK);
+
+	return MV_OK;
+}
+
+int serdes_polarity_config(u32 serdes_num, int is_rx)
+{
+	u32 data;
+	u32 reg_addr;
+	u8 bit_off = (is_rx) ? 11 : 10;
+
+	reg_addr = SERDES_REGS_LANE_BASE_OFFSET(serdes_num) + SYNC_PATTERN_REG;
+	data = reg_read(reg_addr);
+	data = SET_BIT(data, bit_off);
+	reg_write(reg_addr, data);
+
+	return MV_OK;
+}
+
+int hws_power_up_serdes_lanes(struct serdes_map *serdes_map, u8 count)
+{
+	u32 serdes_id, serdes_lane_num;
+	enum ref_clock ref_clock;
+	enum serdes_type serdes_type;
+	enum serdes_speed serdes_speed;
+	enum serdes_mode serdes_mode;
+	int serdes_rx_polarity_swap;
+	int serdes_tx_polarity_swap;
+	int is_pex_enabled = 0;
+
+	/*
+	 * is_pex_enabled:
+	 * Flag which indicates that one of the Serdes is of PEX.
+	 * In this case, PEX unit will be initialized after Serdes power-up
+	 */
+
+	DEBUG_INIT_FULL_S("\n### hws_power_up_serdes_lanes ###\n");
+
+	/* COMMON PHYS SELECTORS register configuration */
+	DEBUG_INIT_FULL_S
+	    ("hws_power_up_serdes_lanes: Updating COMMON PHYS SELECTORS reg\n");
+	CHECK_STATUS(hws_update_serdes_phy_selectors(serdes_map, count));
+
+	/* per Serdes Power Up */
+	for (serdes_id = 0; serdes_id < count; serdes_id++) {
+		DEBUG_INIT_FULL_S
+		    ("calling serdes_power_up_ctrl: serdes lane number ");
+		DEBUG_INIT_FULL_D_10(serdes_lane_num, 1);
+		DEBUG_INIT_FULL_S("\n");
+
+		serdes_lane_num = hws_get_physical_serdes_num(serdes_id);
+		serdes_type = serdes_map[serdes_id].serdes_type;
+		serdes_speed = serdes_map[serdes_id].serdes_speed;
+		serdes_mode = serdes_map[serdes_id].serdes_mode;
+		serdes_rx_polarity_swap = serdes_map[serdes_id].swap_rx;
+		serdes_tx_polarity_swap = serdes_map[serdes_id].swap_tx;
+
+		/* serdes lane is not in use */
+		if (serdes_type == DEFAULT_SERDES)
+			continue;
+		else if (serdes_type <= PEX3)	/* PEX type */
+			is_pex_enabled = 1;
+
+		ref_clock = hws_serdes_get_ref_clock_val(serdes_type);
+		if (ref_clock == REF_CLOCK_UNSUPPORTED) {
+			DEBUG_INIT_S
+			    ("hws_power_up_serdes_lanes: unsupported ref clock\n");
+			return MV_NOT_SUPPORTED;
+		}
+		CHECK_STATUS(serdes_power_up_ctrl(serdes_lane_num,
+						  1,
+						  serdes_type,
+						  serdes_speed,
+						  serdes_mode, ref_clock));
+
+		/* RX Polarity config */
+		if (serdes_rx_polarity_swap)
+			CHECK_STATUS(serdes_polarity_config
+				     (serdes_lane_num, 1));
+
+		/* TX Polarity config */
+		if (serdes_tx_polarity_swap)
+			CHECK_STATUS(serdes_polarity_config
+				     (serdes_lane_num, 0));
+	}
+
+	if (is_pex_enabled) {
+		/* Set PEX_TX_CONFIG_SEQ sequence for PEXx4 mode.
+		   After finish the Power_up sequence for all lanes,
+		   the lanes should be released from reset state.       */
+		CHECK_STATUS(hws_pex_tx_config_seq(serdes_map, count));
+
+		/* PEX configuration */
+		CHECK_STATUS(hws_pex_config(serdes_map, count));
+	}
+
+	/* USB2 configuration */
+	DEBUG_INIT_FULL_S("hws_power_up_serdes_lanes: init USB2 Phys\n");
+	CHECK_STATUS(mv_seq_exec(0 /* not relevant */ , USB2_POWER_UP_SEQ));
+
+	DEBUG_INIT_FULL_S
+	    ("### hws_power_up_serdes_lanes ended successfully ###\n");
+
+	return MV_OK;
+}
+
+int ctrl_high_speed_serdes_phy_config(void)
+{
+	return hws_ctrl_high_speed_serdes_phy_config();
+}
+
+static int serdes_pex_usb3_pipe_delay_w_a(u32 serdes_num, u8 serdes_type)
+{
+	u32 reg_data;
+
+	/* WA for A380 Z1 relevant for lanes 3,4,5 only */
+	if (serdes_num >= 3) {
+		reg_data = reg_read(GENERAL_PURPOSE_RESERVED0_REG);
+		/* set delay on pipe -
+		 * When lane 3 is connected to a MAC of Pex -> set bit 7 to 1.
+		 * When lane 3 is connected to a MAC of USB3 -> set bit 7 to 0.
+		 * When lane 4 is connected to a MAC of Pex -> set bit 8 to 1.
+		 * When lane 4 is connected to a MAC of USB3 -> set bit 8 to 0.
+		 * When lane 5 is connected to a MAC of Pex -> set bit 8 to 1.
+		 * When lane 5 is connected to a MAC of USB3 -> set bit 8 to 0.
+		 */
+		if (serdes_type == PEX)
+			reg_data |= 1 << (7 + (serdes_num - 3));
+		if (serdes_type == USB3) {
+			/* USB3 */
+			reg_data &= ~(1 << (7 + (serdes_num - 3)));
+		}
+		reg_write(GENERAL_PURPOSE_RESERVED0_REG, reg_data);
+	}
+
+	return MV_OK;
+}
+
+/*
+ * hws_serdes_pex_ref_clock_satr_get -
+ *
+ * DESCRIPTION: Get the reference clock value from DEVICE_SAMPLE_AT_RESET1_REG
+ *              and check:
+ *              bit[2] for PEX#0, bit[3] for PEX#1, bit[30] for PEX#2, bit[31]
+ *              for PEX#3.
+ *              If bit=0 --> REF_CLOCK_100MHz
+ *              If bit=1 && DEVICE_SAMPLE_AT_RESET2_REG bit[0]=0
+ *              --> REF_CLOCK_25MHz
+ *              If bit=1 && DEVICE_SAMPLE_AT_RESET2_REG bit[0]=1
+ *              --> REF_CLOCK_40MHz
+ *
+ * INPUT:        serdes_type - Type of Serdes
+ *
+ * OUTPUT:       pex_satr   -  Return the REF_CLOCK value:
+ *                            REF_CLOCK_25MHz, REF_CLOCK_40MHz or REF_CLOCK_100MHz
+ *
+ * RETURNS:      MV_OK        - for success
+ *               MV_BAD_PARAM - for fail
+ */
+int hws_serdes_pex_ref_clock_satr_get(enum serdes_type serdes_type, u32 *pex_satr)
+{
+	u32 data, reg_satr1;
+
+	reg_satr1 = reg_read(DEVICE_SAMPLE_AT_RESET1_REG);
+
+	switch (serdes_type) {
+	case PEX0:
+		data = REF_CLK_SELECTOR_VAL_PEX0(reg_satr1);
+		break;
+	case PEX1:
+		data = REF_CLK_SELECTOR_VAL_PEX1(reg_satr1);
+		break;
+	case PEX2:
+		data = REF_CLK_SELECTOR_VAL_PEX2(reg_satr1);
+		break;
+	case PEX3:
+		data = REF_CLK_SELECTOR_VAL_PEX3(reg_satr1);
+		break;
+	default:
+		printf("%s: Error: SerDes type %d is not supported\n",
+		       __func__, serdes_type);
+		return MV_BAD_PARAM;
+	}
+
+	*pex_satr = data;
+
+	return MV_OK;
+}
+
+u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type)
+{
+	u32 pex_satr;
+	enum ref_clock ref_clock;
+
+	DEBUG_INIT_FULL_S("\n### hws_serdes_get_ref_clock_val ###\n");
+
+	if (serdes_type >= LAST_SERDES_TYPE)
+		return REF_CLOCK_UNSUPPORTED;
+
+	/* read ref clock from S@R */
+	ref_clock = hws_serdes_silicon_ref_clock_get();
+
+	if (serdes_type > PEX3) {
+		/* for all Serdes types but PCIe */
+		return ref_clock;
+	}
+
+	/* for PCIe, need also to check PCIe S@R */
+	CHECK_STATUS(hws_serdes_pex_ref_clock_satr_get
+		     (serdes_type, &pex_satr));
+
+	if (pex_satr == 0) {
+		return REF_CLOCK_100MHZ;
+	} else if (pex_satr == 1) {
+		/* value of 1 means we can use ref clock from SoC (as other Serdes types) */
+		return ref_clock;
+	} else {
+		printf
+		    ("%s: Error: REF_CLK_SELECTOR_VAL for SerDes type %d is wrong\n",
+		     __func__, serdes_type);
+		return REF_CLOCK_UNSUPPORTED;
+	}
+}
+
+int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up,
+			 enum serdes_type serdes_type,
+			 enum serdes_speed baud_rate,
+			 enum serdes_mode serdes_mode, enum ref_clock ref_clock)
+{
+	u32 sata_idx, pex_idx, sata_port;
+	enum serdes_seq speed_seq_id;
+	u32 reg_data;
+	int is_pex_by1;
+
+	DEBUG_INIT_FULL_S("\n### serdes_power_up_ctrl ###\n");
+
+	if (serdes_power_up == 1) {	/* Serdes power up */
+		DEBUG_INIT_FULL_S
+		    ("serdes_power_up_ctrl: executing power up.. ");
+		DEBUG_INIT_FULL_C("serdes num = ", serdes_num, 2);
+		DEBUG_INIT_FULL_C("serdes type = ", serdes_type, 2);
+
+		DEBUG_INIT_FULL_S("Going access 1");
+
+		/* Getting the Speed Select sequence id */
+		speed_seq_id =
+			serdes_type_and_speed_to_speed_seq(serdes_type,
+							   baud_rate);
+		if (speed_seq_id == SERDES_LAST_SEQ) {
+			printf
+			    ("serdes_power_up_ctrl: serdes type %d and speed %d are not supported together\n",
+			     serdes_type, baud_rate);
+
+			return MV_BAD_PARAM;
+		}
+
+		/* Executing power up, ref clock set, speed config and TX config */
+		switch (serdes_type) {
+		case PEX0:
+		case PEX1:
+		case PEX2:
+		case PEX3:
+			if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) {
+				CHECK_STATUS(serdes_pex_usb3_pipe_delay_w_a
+					     (serdes_num, PEX));
+			}
+
+			is_pex_by1 = (serdes_mode == PEX_ROOT_COMPLEX_X1) ||
+				(serdes_mode == PEX_END_POINT_X1);
+			pex_idx = serdes_type - PEX0;
+
+			if ((is_pex_by1 == 1) || (serdes_type == PEX0)) {
+				/* For PEX by 4, init only the PEX 0 */
+				reg_data = reg_read(SOC_CONTROL_REG1);
+				if (is_pex_by1 == 1)
+					reg_data |= 0x4000;
+				else
+					reg_data &= ~0x4000;
+				reg_write(SOC_CONTROL_REG1, reg_data);
+
+				reg_data =
+				    reg_read(((PEX_IF_REGS_BASE(pex_idx)) +
+					      0x6c));
+				reg_data &= ~0x3f0;
+				if (is_pex_by1 == 1)
+					reg_data |= 0x10;
+				else
+					reg_data |= 0x40;
+				reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x6c),
+					  reg_data);
+
+				reg_data =
+				    reg_read(((PEX_IF_REGS_BASE(pex_idx)) +
+					      0x6c));
+				reg_data &= ~0xf;
+				reg_data |= 0x2;
+				reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x6c),
+					  reg_data);
+
+				reg_data =
+				    reg_read(((PEX_IF_REGS_BASE(pex_idx)) +
+					      0x70));
+				reg_data &= ~0x40;
+				reg_data |= 0x40;
+				reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x70),
+					  reg_data);
+			}
+
+			CHECK_STATUS(mv_seq_exec(serdes_num, PEX_POWER_UP_SEQ));
+			if (is_pex_by1 == 0) {
+				/*
+				 * for PEX by 4 - use the PEX index as the
+				 * seq array index
+				 */
+				serdes_seq_db[PEX_BY_4_CONFIG_SEQ].
+				    data_arr_idx = pex_idx;
+				CHECK_STATUS(mv_seq_exec
+					     (serdes_num, PEX_BY_4_CONFIG_SEQ));
+			}
+
+			CHECK_STATUS(hws_ref_clock_set
+				     (serdes_num, serdes_type, ref_clock));
+			CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, PEX_ELECTRICAL_CONFIG_SEQ));
+
+			if (is_pex_by1 == 1) {
+				CHECK_STATUS(mv_seq_exec
+					     (serdes_num, PEX_TX_CONFIG_SEQ2));
+				CHECK_STATUS(mv_seq_exec
+					     (serdes_num, PEX_TX_CONFIG_SEQ3));
+				CHECK_STATUS(mv_seq_exec
+					     (serdes_num, PEX_TX_CONFIG_SEQ1));
+			}
+			udelay(20);
+
+			break;
+		case USB3_HOST0:
+		case USB3_HOST1:
+		case USB3_DEVICE:
+			if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) {
+				CHECK_STATUS(serdes_pex_usb3_pipe_delay_w_a
+					     (serdes_num, USB3));
+			}
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, USB3_POWER_UP_SEQ));
+			CHECK_STATUS(hws_ref_clock_set
+				     (serdes_num, serdes_type, ref_clock));
+			CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+			if (serdes_type == USB3_DEVICE) {
+				CHECK_STATUS(mv_seq_exec
+					     (serdes_num,
+					      USB3_DEVICE_CONFIG_SEQ));
+			}
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, USB3_ELECTRICAL_CONFIG_SEQ));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, USB3_TX_CONFIG_SEQ1));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, USB3_TX_CONFIG_SEQ2));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, USB3_TX_CONFIG_SEQ3));
+
+			udelay(10000);
+			break;
+		case SATA0:
+		case SATA1:
+		case SATA2:
+		case SATA3:
+			sata_idx = ((serdes_type == SATA0) ||
+				    (serdes_type == SATA1)) ? 0 : 1;
+			sata_port = ((serdes_type == SATA0) ||
+				     (serdes_type == SATA2)) ? 0 : 1;
+
+			CHECK_STATUS(mv_seq_exec
+				     (sata_idx, (sata_port == 0) ?
+				      SATA_PORT_0_ONLY_POWER_UP_SEQ :
+				      SATA_PORT_1_ONLY_POWER_UP_SEQ));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, SATA_POWER_UP_SEQ));
+			CHECK_STATUS(hws_ref_clock_set
+				     (serdes_num, serdes_type, ref_clock));
+			CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, SATA_ELECTRICAL_CONFIG_SEQ));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, SATA_TX_CONFIG_SEQ1));
+			CHECK_STATUS(mv_seq_exec
+				     (sata_idx, (sata_port == 0) ?
+				      SATA_PORT_0_ONLY_TX_CONFIG_SEQ :
+				      SATA_PORT_1_ONLY_TX_CONFIG_SEQ));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, SATA_TX_CONFIG_SEQ2));
+
+			udelay(10000);
+			break;
+		case SGMII0:
+		case SGMII1:
+		case SGMII2:
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, SGMII_POWER_UP_SEQ));
+			CHECK_STATUS(hws_ref_clock_set
+				     (serdes_num, serdes_type, ref_clock));
+			CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, SGMII_ELECTRICAL_CONFIG_SEQ));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, SGMII_TX_CONFIG_SEQ1));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, SGMII_TX_CONFIG_SEQ2));
+
+			/* GBE configuration */
+			reg_data = reg_read(GBE_CONFIGURATION_REG);
+			/* write the SGMII index */
+			reg_data |= 0x1 << (serdes_type - SGMII0);
+			reg_write(GBE_CONFIGURATION_REG, reg_data);
+
+			break;
+		case QSGMII:
+			if (hws_ctrl_serdes_rev_get() < MV_SERDES_REV_2_1)
+				return MV_NOT_SUPPORTED;
+
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, QSGMII_POWER_UP_SEQ));
+			CHECK_STATUS(hws_ref_clock_set
+				     (serdes_num, serdes_type, ref_clock));
+			CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num,
+				      QSGMII_ELECTRICAL_CONFIG_SEQ));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, QSGMII_TX_CONFIG_SEQ1));
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num, QSGMII_TX_CONFIG_SEQ2));
+			break;
+		case SGMII3:
+		case XAUI:
+		case RXAUI:
+			CHECK_STATUS(serdes_power_up_ctrl_ext
+				     (serdes_num, serdes_power_up, serdes_type,
+				      baud_rate, serdes_mode, ref_clock));
+			break;
+		default:
+			DEBUG_INIT_S
+			    ("serdes_power_up_ctrl: bad serdes_type parameter\n");
+			return MV_BAD_PARAM;
+		}
+	} else {		/* Serdes power down */
+		DEBUG_INIT_FULL_S("serdes_power_up: executing power down.. ");
+		DEBUG_INIT_FULL_C("serdes num = ", serdes_num, 1);
+
+		CHECK_STATUS(mv_seq_exec(serdes_num, SERDES_POWER_DOWN_SEQ));
+	}
+
+	DEBUG_INIT_FULL_C(
+		"serdes_power_up_ctrl ended successfully for serdes ",
+		serdes_num, 2);
+
+	return MV_OK;
+}
+
+int hws_update_serdes_phy_selectors(struct serdes_map *serdes_map, u8 count)
+{
+	u32 lane_data, idx, serdes_lane_hw_num, reg_data = 0;
+	enum serdes_type serdes_type;
+	enum serdes_mode serdes_mode;
+	u8 select_bit_off;
+	int is_pex_x4 = 0;
+	int updated_topology_print = 0;
+
+	DEBUG_INIT_FULL_S("\n### hws_update_serdes_phy_selectors ###\n");
+	DEBUG_INIT_FULL_S
+	    ("Updating the COMMON PHYS SELECTORS register with the serdes types\n");
+
+	if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2)
+		select_bit_off = 3;
+	else
+		select_bit_off = 4;
+
+	/*
+	 * Updating bits 0-17 in the COMMON PHYS SELECTORS register
+	 * according to the serdes types
+	 */
+	for (idx = 0; idx < count; idx++) {
+		serdes_type = serdes_map[idx].serdes_type;
+		serdes_mode = serdes_map[idx].serdes_mode;
+		serdes_lane_hw_num = hws_get_physical_serdes_num(idx);
+
+		lane_data =
+		    hws_serdes_get_phy_selector_val(serdes_lane_hw_num,
+						    serdes_type);
+
+		if (serdes_type == DEFAULT_SERDES)
+			continue;
+
+		if (hws_serdes_topology_verify
+		    (serdes_type, idx, serdes_mode) != MV_OK) {
+			serdes_map[idx].serdes_type =
+			    DEFAULT_SERDES;
+			printf("%s: SerDes lane #%d is  disabled\n", __func__,
+			       serdes_lane_hw_num);
+			updated_topology_print = 1;
+			continue;
+		}
+
+		/*
+		 * Checking if the board topology configuration includes
+		 * PEXx4 - for the next step
+		 */
+		if ((serdes_mode == PEX_END_POINT_X4) ||
+		    (serdes_mode == PEX_ROOT_COMPLEX_X4)) {
+			/* update lane data to the 3 next SERDES lanes */
+			lane_data =
+			    common_phys_selectors_pex_by4_lanes
+			    [serdes_lane_hw_num];
+			if (serdes_type == PEX0)
+				is_pex_x4 = 1;
+		}
+
+		if (lane_data == NA) {
+			printf
+			    ("%s: Warning: SerDes lane #%d and type %d are not supported together\n",
+			     __func__, serdes_lane_hw_num, serdes_mode);
+			serdes_map[idx].serdes_type = DEFAULT_SERDES;
+			printf("%s: SerDes lane #%d is  disabled\n", __func__,
+			       serdes_lane_hw_num);
+			continue;
+		}
+
+		/*
+		 * Updating the data that will be written to
+		 * COMMON_PHYS_SELECTORS_REG
+		 */
+		reg_data |= (lane_data <<
+			     (select_bit_off * serdes_lane_hw_num));
+	}
+
+	/*
+	 * Check that number of used lanes for XAUI and RXAUI
+	 * (if used) is right
+	 */
+	hws_serdes_xaui_topology_verify();
+
+	/* Print topology */
+	if (updated_topology_print)
+		print_topology_details(serdes_map, count);
+
+	/*
+	 * Updating the PEXx4 Enable bit in the COMMON PHYS SELECTORS
+	 * register for PEXx4 mode
+	 */
+	reg_data |= (is_pex_x4 == 1) ? (0x1 << PEX_X4_ENABLE_OFFS) : 0;
+
+	/* Updating the COMMON PHYS SELECTORS register */
+	reg_write(COMMON_PHYS_SELECTORS_REG, reg_data);
+
+	return MV_OK;
+}
+
+int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type,
+		      enum ref_clock ref_clock)
+{
+	u32 data1 = 0, data2 = 0, data3 = 0, reg_data;
+
+	DEBUG_INIT_FULL_S("\n### hws_ref_clock_set ###\n");
+
+	if (hws_is_serdes_active(serdes_num) != 1) {
+		printf("%s: SerDes lane #%d is not Active\n", __func__,
+		       serdes_num);
+		return MV_BAD_PARAM;
+	}
+
+	switch (serdes_type) {
+	case PEX0:
+	case PEX1:
+	case PEX2:
+	case PEX3:
+		switch (ref_clock) {
+		case REF_CLOCK_25MHZ:
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num,
+				      PEX_CONFIG_REF_CLOCK_25MHZ_SEQ));
+			return MV_OK;
+		case REF_CLOCK_100MHZ:
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_num,
+				      PEX_CONFIG_REF_CLOCK_100MHZ_SEQ));
+			return MV_OK;
+		default:
+			printf
+			    ("%s: Error: ref_clock %d for SerDes lane #%d, type %d is not supported\n",
+			     __func__, ref_clock, serdes_num, serdes_type);
+			return MV_BAD_PARAM;
+		}
+	case USB3_HOST0:
+	case USB3_HOST1:
+	case USB3_DEVICE:
+		if (ref_clock == REF_CLOCK_25MHZ) {
+			data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2;
+			data2 = GLOBAL_PM_CTRL_REG_25MHZ_VAL;
+			data3 = LANE_CFG4_REG_25MHZ_VAL;
+		} else if (ref_clock == REF_CLOCK_40MHZ) {
+			data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL;
+			data2 = GLOBAL_PM_CTRL_REG_40MHZ_VAL;
+			data3 = LANE_CFG4_REG_40MHZ_VAL;
+		} else {
+			printf
+			    ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n",
+			     serdes_type);
+			return MV_BAD_PARAM;
+		}
+		break;
+	case SATA0:
+	case SATA1:
+	case SATA2:
+	case SATA3:
+	case SGMII0:
+	case SGMII1:
+	case SGMII2:
+	case QSGMII:
+		if (ref_clock == REF_CLOCK_25MHZ) {
+			data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1;
+		} else if (ref_clock == REF_CLOCK_40MHZ) {
+			data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL;
+		} else {
+			printf
+			    ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n",
+			     serdes_type);
+			return MV_BAD_PARAM;
+		}
+		break;
+	default:
+		DEBUG_INIT_S("hws_ref_clock_set: not supported serdes type\n");
+		return MV_BAD_PARAM;
+	}
+
+	/*
+	 * Write the ref_clock to relevant SELECT_REF_CLOCK_REG bits and
+	 * offset
+	 */
+	reg_data = reg_read(POWER_AND_PLL_CTRL_REG +
+			    SERDES_REGS_LANE_BASE_OFFSET(serdes_num));
+	reg_data &= POWER_AND_PLL_CTRL_REG_MASK;
+	reg_data |= data1;
+	reg_write(POWER_AND_PLL_CTRL_REG +
+		  SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data);
+
+	if ((serdes_type == USB3_HOST0) || (serdes_type == USB3_HOST1) ||
+	    (serdes_type == USB3_DEVICE)) {
+		reg_data = reg_read(GLOBAL_PM_CTRL +
+				    SERDES_REGS_LANE_BASE_OFFSET(serdes_num));
+		reg_data &= GLOBAL_PM_CTRL_REG_MASK;
+		reg_data |= data2;
+		reg_write(GLOBAL_PM_CTRL +
+			  SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data);
+
+		reg_data = reg_read(LANE_CFG4_REG +
+				    SERDES_REGS_LANE_BASE_OFFSET(serdes_num));
+		reg_data &= LANE_CFG4_REG_MASK;
+		reg_data |= data3;
+		reg_write(LANE_CFG4_REG +
+			  SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data);
+	}
+
+	return MV_OK;
+}
+
+/*
+ * hws_pex_tx_config_seq -
+ *
+ * DESCRIPTION:          Set PEX_TX_CONFIG_SEQ sequence init for PEXx4 mode
+ * INPUT:                serdes_map       - The board topology map
+ * OUTPUT:               None
+ * RETURNS:              MV_OK           - for success
+ *                       MV_BAD_PARAM    - for fail
+ */
+int hws_pex_tx_config_seq(const struct serdes_map *serdes_map, u8 count)
+{
+	enum serdes_mode serdes_mode;
+	u32 serdes_lane_id, serdes_lane_hw_num;
+
+	DEBUG_INIT_FULL_S("\n### hws_pex_tx_config_seq ###\n");
+
+	/*
+	 * For PEXx4: the pex_and_usb3_tx_config_params1/2/3
+	 * configurations should run by setting each sequence for
+	 * all 4 lanes.
+	 */
+
+	/* relese pipe soft reset for all lanes */
+	for (serdes_lane_id = 0; serdes_lane_id < count; serdes_lane_id++) {
+		serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
+		serdes_lane_hw_num =
+		    hws_get_physical_serdes_num(serdes_lane_id);
+
+		if ((serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+		    (serdes_mode == PEX_END_POINT_X4)) {
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ1));
+		}
+	}
+
+	/* set phy soft reset for all lanes */
+	for (serdes_lane_id = 0; serdes_lane_id < count; serdes_lane_id++) {
+		serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
+		serdes_lane_hw_num =
+		    hws_get_physical_serdes_num(serdes_lane_id);
+		if ((serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+		    (serdes_mode == PEX_END_POINT_X4)) {
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ2));
+		}
+	}
+
+	/* set phy soft reset for all lanes */
+	for (serdes_lane_id = 0; serdes_lane_id < count; serdes_lane_id++) {
+		serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
+		serdes_lane_hw_num =
+		    hws_get_physical_serdes_num(serdes_lane_id);
+		if ((serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+		    (serdes_mode == PEX_END_POINT_X4)) {
+			CHECK_STATUS(mv_seq_exec
+				     (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ3));
+		}
+	}
+
+	return MV_OK;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
new file mode 100644
index 000000000..dd229e1a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#ifndef _HIGH_SPEED_ENV_SPEC_H
+#define _HIGH_SPEED_ENV_SPEC_H
+
+#include "seq_exec.h"
+
+/*
+ * For setting or clearing a certain bit (bit is a number between 0 and 31)
+ * in the data
+ */
+#define SET_BIT(data, bit)		((data) | (0x1 << (bit)))
+#define CLEAR_BIT(data, bit)		((data) & (~(0x1 << (bit))))
+
+#define MAX_SERDES_LANES		7	/* as in a39x */
+
+/* Serdes revision */
+/* Serdes revision 1.2 (for A38x-Z1) */
+#define MV_SERDES_REV_1_2		0x0
+/* Serdes revision 2.1 (for A39x-Z1, A38x-A0) */
+#define MV_SERDES_REV_2_1		0x1
+#define MV_SERDES_REV_NA		0xff
+
+#define	SERDES_REGS_LANE_BASE_OFFSET(lane)	(0x800 * (lane))
+
+#define PEX_X4_ENABLE_OFFS						\
+	(hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2 ? 18 : 31)
+
+/* Serdes lane types */
+enum serdes_type {
+	PEX0,
+	PEX1,
+	PEX2,
+	PEX3,
+	SATA0,
+	SATA1,
+	SATA2,
+	SATA3,
+	SGMII0,
+	SGMII1,
+	SGMII2,
+	QSGMII,
+	USB3_HOST0,
+	USB3_HOST1,
+	USB3_DEVICE,
+	SGMII3,
+	XAUI,
+	RXAUI,
+	DEFAULT_SERDES,
+	LAST_SERDES_TYPE
+};
+
+/* Serdes baud rates */
+enum serdes_speed {
+	SERDES_SPEED_1_25_GBPS,
+	SERDES_SPEED_1_5_GBPS,
+	SERDES_SPEED_2_5_GBPS,
+	SERDES_SPEED_3_GBPS,
+	SERDES_SPEED_3_125_GBPS,
+	SERDES_SPEED_5_GBPS,
+	SERDES_SPEED_6_GBPS,
+	SERDES_SPEED_6_25_GBPS,
+	LAST_SERDES_SPEED
+};
+
+/* Serdes modes */
+enum serdes_mode {
+	PEX_ROOT_COMPLEX_X1,
+	PEX_ROOT_COMPLEX_X4,
+	PEX_END_POINT_X1,
+	PEX_END_POINT_X4,
+
+	SERDES_DEFAULT_MODE, /* not pex */
+
+	SERDES_LAST_MODE
+};
+
+struct serdes_map {
+	enum serdes_type	serdes_type;
+	enum serdes_speed	serdes_speed;
+	enum serdes_mode	serdes_mode;
+	int			swap_rx;
+	int			swap_tx;
+};
+
+/* Serdes ref clock options */
+enum ref_clock {
+	REF_CLOCK_25MHZ,
+	REF_CLOCK_100MHZ,
+	REF_CLOCK_40MHZ,
+	REF_CLOCK_UNSUPPORTED
+};
+
+/* Serdes sequences */
+enum serdes_seq {
+	SATA_PORT_0_ONLY_POWER_UP_SEQ,
+	SATA_PORT_1_ONLY_POWER_UP_SEQ,
+	SATA_POWER_UP_SEQ,
+	SATA_1_5_SPEED_CONFIG_SEQ,
+	SATA_3_SPEED_CONFIG_SEQ,
+	SATA_6_SPEED_CONFIG_SEQ,
+	SATA_ELECTRICAL_CONFIG_SEQ,
+	SATA_TX_CONFIG_SEQ1,
+	SATA_PORT_0_ONLY_TX_CONFIG_SEQ,
+	SATA_PORT_1_ONLY_TX_CONFIG_SEQ,
+	SATA_TX_CONFIG_SEQ2,
+
+	SGMII_POWER_UP_SEQ,
+	SGMII_1_25_SPEED_CONFIG_SEQ,
+	SGMII_3_125_SPEED_CONFIG_SEQ,
+	SGMII_ELECTRICAL_CONFIG_SEQ,
+	SGMII_TX_CONFIG_SEQ1,
+	SGMII_TX_CONFIG_SEQ2,
+
+	PEX_POWER_UP_SEQ,
+	PEX_2_5_SPEED_CONFIG_SEQ,
+	PEX_5_SPEED_CONFIG_SEQ,
+	PEX_ELECTRICAL_CONFIG_SEQ,
+	PEX_TX_CONFIG_SEQ1,
+	PEX_TX_CONFIG_SEQ2,
+	PEX_TX_CONFIG_SEQ3,
+	PEX_BY_4_CONFIG_SEQ,
+	PEX_CONFIG_REF_CLOCK_25MHZ_SEQ,
+	PEX_CONFIG_REF_CLOCK_100MHZ_SEQ,
+	PEX_CONFIG_REF_CLOCK_40MHZ_SEQ,
+
+	USB3_POWER_UP_SEQ,
+	USB3_HOST_SPEED_CONFIG_SEQ,
+	USB3_DEVICE_SPEED_CONFIG_SEQ,
+	USB3_ELECTRICAL_CONFIG_SEQ,
+	USB3_TX_CONFIG_SEQ1,
+	USB3_TX_CONFIG_SEQ2,
+	USB3_TX_CONFIG_SEQ3,
+	USB3_DEVICE_CONFIG_SEQ,
+
+	USB2_POWER_UP_SEQ,
+
+	SERDES_POWER_DOWN_SEQ,
+
+	SGMII3_POWER_UP_SEQ,
+	SGMII3_1_25_SPEED_CONFIG_SEQ,
+	SGMII3_TX_CONFIG_SEQ1,
+	SGMII3_TX_CONFIG_SEQ2,
+
+	QSGMII_POWER_UP_SEQ,
+	QSGMII_5_SPEED_CONFIG_SEQ,
+	QSGMII_ELECTRICAL_CONFIG_SEQ,
+	QSGMII_TX_CONFIG_SEQ1,
+	QSGMII_TX_CONFIG_SEQ2,
+
+	XAUI_POWER_UP_SEQ,
+	XAUI_3_125_SPEED_CONFIG_SEQ,
+	XAUI_ELECTRICAL_CONFIG_SEQ,
+	XAUI_TX_CONFIG_SEQ1,
+	XAUI_TX_CONFIG_SEQ2,
+
+	RXAUI_POWER_UP_SEQ,
+	RXAUI_6_25_SPEED_CONFIG_SEQ,
+	RXAUI_ELECTRICAL_CONFIG_SEQ,
+	RXAUI_TX_CONFIG_SEQ1,
+	RXAUI_TX_CONFIG_SEQ2,
+
+	SERDES_LAST_SEQ
+};
+
+/* The different sequence types for PEX and USB3 */
+enum {
+	PEX,
+	USB3,
+	LAST_PEX_USB_SEQ_TYPE
+};
+
+enum {
+	PEXSERDES_SPEED_2_5_GBPS,
+	PEXSERDES_SPEED_5_GBPS,
+	USB3SERDES_SPEED_5_GBPS_HOST,
+	USB3SERDES_SPEED_5_GBPS_DEVICE,
+	LAST_PEX_USB_SPEED_SEQ_TYPE
+};
+
+/* The different sequence types for SATA and SGMII */
+enum {
+	SATA,
+	SGMII,
+	SGMII_3_125,
+	LAST_SATA_SGMII_SEQ_TYPE
+};
+
+enum {
+	QSGMII_SEQ_IDX,
+	LAST_QSGMII_SEQ_TYPE
+};
+
+enum {
+	XAUI_SEQ_IDX,
+	RXAUI_SEQ_IDX,
+	LAST_XAUI_RXAUI_SEQ_TYPE
+};
+
+enum {
+	SATASERDES_SPEED_1_5_GBPS,
+	SATASERDES_SPEED_3_GBPS,
+	SATASERDES_SPEED_6_GBPS,
+	SGMIISERDES_SPEED_1_25_GBPS,
+	SGMIISERDES_SPEED_3_125_GBPS,
+	LAST_SATA_SGMII_SPEED_SEQ_TYPE
+};
+
+extern u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES];
+extern u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES];
+
+u8 hws_ctrl_serdes_rev_get(void);
+int mv_update_serdes_select_phy_mode_seq(void);
+int hws_board_topology_load(struct serdes_map **serdes_map, u8 *count);
+enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type,
+						   enum serdes_speed baud_rate);
+int hws_serdes_seq_init(void);
+int hws_serdes_seq_db_init(void);
+int hws_power_up_serdes_lanes(struct serdes_map *serdes_map, u8 count);
+int hws_ctrl_high_speed_serdes_phy_config(void);
+int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up,
+			 enum serdes_type serdes_type,
+			 enum serdes_speed baud_rate,
+			 enum serdes_mode serdes_mode,
+			 enum ref_clock ref_clock);
+int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up,
+			     enum serdes_type serdes_type,
+			     enum serdes_speed baud_rate,
+			     enum serdes_mode serdes_mode,
+			     enum ref_clock ref_clock);
+u32 hws_serdes_silicon_ref_clock_get(void);
+int hws_serdes_pex_ref_clock_get(enum serdes_type serdes_type,
+				 enum ref_clock *ref_clock);
+int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type,
+		      enum ref_clock ref_clock);
+int hws_update_serdes_phy_selectors(struct serdes_map *serdes_map, u8 count);
+u32 hws_serdes_get_phy_selector_val(int serdes_num,
+				    enum serdes_type serdes_type);
+u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type);
+u32 hws_serdes_get_max_lane(void);
+int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset,
+			  u32 *unit_base_reg, u32 *unit_offset);
+int hws_pex_tx_config_seq(const struct serdes_map *serdes_map, u8 count);
+u32 hws_get_physical_serdes_num(u32 serdes_num);
+int hws_is_serdes_active(u8 lane_num);
+
+#endif /* _HIGH_SPEED_ENV_SPEC_H */
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c
new file mode 100644
index 000000000..2a51b7113
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/delay.h>
+
+#include "seq_exec.h"
+#include "high_speed_env_spec.h"
+
+#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h"
+
+#if defined(MV_DEBUG_INIT_FULL) || defined(MV_DEBUG)
+#define DB(x)	x
+#else
+#define DB(x)
+#endif
+
+/* Array for mapping the operation (write, poll or delay) functions */
+op_execute_func_ptr op_execute_func_arr[] = {
+	write_op_execute,
+	delay_op_execute,
+	poll_op_execute
+};
+
+int write_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx)
+{
+	u32 unit_base_reg, unit_offset, data, mask, reg_data, reg_addr;
+
+	/* Getting write op params from the input parameter */
+	data = params->data[data_arr_idx];
+	mask = params->mask;
+
+	/* an empty operation */
+	if (data == NO_DATA)
+		return MV_OK;
+
+	/* get updated base address since it can be different between Serdes */
+	CHECK_STATUS(hws_get_ext_base_addr(serdes_num, params->unit_base_reg,
+					   params->unit_offset,
+					   &unit_base_reg, &unit_offset));
+
+	/* Address calculation */
+	reg_addr = unit_base_reg + unit_offset * serdes_num;
+
+#ifdef SEQ_DEBUG
+	printf("Write: 0x%x: 0x%x (mask 0x%x) - ", reg_addr, data, mask);
+#endif
+	/* Reading old value */
+	reg_data = reg_read(reg_addr);
+	reg_data &= (~mask);
+
+	/* Writing new data */
+	data &= mask;
+	reg_data |= data;
+	reg_write(reg_addr, reg_data);
+
+#ifdef SEQ_DEBUG
+	printf(" - 0x%x\n", reg_data);
+#endif
+
+	return MV_OK;
+}
+
+int delay_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx)
+{
+	u32 delay;
+
+	/* Getting delay op params from the input parameter */
+	delay = params->wait_time;
+#ifdef SEQ_DEBUG
+	printf("Delay: %d\n", delay);
+#endif
+	mdelay(delay);
+
+	return MV_OK;
+}
+
+int poll_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx)
+{
+	u32 unit_base_reg, unit_offset, data, mask, num_of_loops, wait_time;
+	u32 poll_counter = 0;
+	u32 reg_addr, reg_data;
+
+	/* Getting poll op params from the input parameter */
+	data = params->data[data_arr_idx];
+	mask = params->mask;
+	num_of_loops = params->num_of_loops;
+	wait_time = params->wait_time;
+
+	/* an empty operation */
+	if (data == NO_DATA)
+		return MV_OK;
+
+	/* get updated base address since it can be different between Serdes */
+	CHECK_STATUS(hws_get_ext_base_addr(serdes_num, params->unit_base_reg,
+					   params->unit_offset,
+					   &unit_base_reg, &unit_offset));
+
+	/* Address calculation */
+	reg_addr = unit_base_reg + unit_offset * serdes_num;
+
+	/* Polling */
+#ifdef SEQ_DEBUG
+	printf("Poll:  0x%x: 0x%x (mask 0x%x)\n", reg_addr, data, mask);
+#endif
+
+	do {
+		reg_data = reg_read(reg_addr) & mask;
+		poll_counter++;
+		udelay(wait_time);
+	} while ((reg_data != data) && (poll_counter < num_of_loops));
+
+	if ((poll_counter >= num_of_loops) && (reg_data != data)) {
+		DEBUG_INIT_S("poll_op_execute: TIMEOUT\n");
+		return MV_TIMEOUT;
+	}
+
+	return MV_OK;
+}
+
+enum mv_op get_cfg_seq_op(struct op_params *params)
+{
+	if (params->wait_time == 0)
+		return WRITE_OP;
+	else if (params->num_of_loops == 0)
+		return DELAY_OP;
+
+	return POLL_OP;
+}
+
+int mv_seq_exec(u32 serdes_num, u32 seq_id)
+{
+	u32 seq_idx;
+	struct op_params *seq_arr;
+	u32 seq_size;
+	u32 data_arr_idx;
+	enum mv_op curr_op;
+
+	DB(printf("\n### mv_seq_exec ###\n"));
+	DB(printf("seq id: %d\n", seq_id));
+
+	if (hws_is_serdes_active(serdes_num) != 1) {
+		printf("mv_seq_exec_ext:Error: SerDes lane %d is not valid\n",
+		       serdes_num);
+		return MV_BAD_PARAM;
+	}
+
+	seq_arr = serdes_seq_db[seq_id].op_params_ptr;
+	seq_size = serdes_seq_db[seq_id].cfg_seq_size;
+	data_arr_idx = serdes_seq_db[seq_id].data_arr_idx;
+
+	DB(printf("seq_size: %d\n", seq_size));
+	DB(printf("data_arr_idx: %d\n", data_arr_idx));
+
+	/* Executing the sequence operations */
+	for (seq_idx = 0; seq_idx < seq_size; seq_idx++) {
+		curr_op = get_cfg_seq_op(&seq_arr[seq_idx]);
+		op_execute_func_arr[curr_op](serdes_num, &seq_arr[seq_idx],
+					     data_arr_idx);
+	}
+
+	return MV_OK;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h
new file mode 100644
index 000000000..fe0cb8f75
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#ifndef _SEQ_EXEC_H
+#define _SEQ_EXEC_H
+
+#define NA			0xff
+#define DEFAULT_PARAM		0
+#define MV_BOARD_TCLK_ERROR	0xffffffff
+
+#define NO_DATA			0xffffffff
+#define MAX_DATA_ARRAY		5
+#define FIRST_CELL		0
+
+/* Operation types */
+enum mv_op {
+	WRITE_OP,
+	DELAY_OP,
+	POLL_OP,
+};
+
+/* Operation parameters */
+struct op_params {
+	u32 unit_base_reg;
+	u32 unit_offset;
+	u32 mask;
+	u32 data[MAX_DATA_ARRAY];	/* data array */
+	u8 wait_time;			/* msec */
+	u16 num_of_loops;		/* for polling only */
+};
+
+/*
+ * Sequence parameters. Each sequence contains:
+ * 1. Sequence id.
+ * 2. Sequence size (total amount of operations during the sequence)
+ * 3. a series of operations. operations can be write, poll or delay
+ * 4. index in the data array (the entry where the relevant data sits)
+ */
+struct cfg_seq {
+	struct op_params *op_params_ptr;
+	u8 cfg_seq_size;
+	u8 data_arr_idx;
+};
+
+extern struct cfg_seq serdes_seq_db[];
+
+/*
+ * A generic function type for executing an operation (write, poll or delay)
+ */
+typedef int (*op_execute_func_ptr)(u32 serdes_num, struct op_params *params,
+				   u32 data_arr_idx);
+
+/* Specific functions for executing each operation */
+int write_op_execute(u32 serdes_num, struct op_params *params,
+		     u32 data_arr_idx);
+int delay_op_execute(u32 serdes_num, struct op_params *params,
+		     u32 data_arr_idx);
+int poll_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx);
+enum mv_op get_cfg_seq_op(struct op_params *params);
+int mv_seq_exec(u32 serdes_num, u32 seq_id);
+
+#endif /*_SEQ_EXEC_H*/
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
new file mode 100644
index 000000000..950680a58
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "seq_exec.h"
+#include "sys_env_lib.h"
+
+enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
+/*                     6820    6810     6811     6828     */
+/* PEX_UNIT_ID      */ { 4,     3,       3,       4},
+/* ETH_GIG_UNIT_ID  */ { 3,	2,       3,       3},
+/* USB3H_UNIT_ID    */ { 2,     2,       2,       2},
+/* USB3D_UNIT_ID    */ { 1,     1,       1,       1},
+/* SATA_UNIT_ID     */ { 2,     2,       2,       4},
+/* QSGMII_UNIT_ID   */ { 1,     0,       0,       1},
+/* XAUI_UNIT_ID     */ { 0,     0,       0,       0},
+/* RXAUI_UNIT_ID    */ { 0,     0,       0,       0}
+};
+
+u32 g_dev_id = -1;
+
+u32 mv_board_id_get(void)
+{
+#if defined(CONFIG_TARGET_DB_88F6820_GP)
+	return DB_GP_68XX_ID;
+#else
+	/*
+	 * Return 0 here for custom board as this should not be used
+	 * for custom boards.
+	 */
+	return 0;
+#endif
+}
+
+u32 mv_board_tclk_get(void)
+{
+	u32 value;
+
+	value = (reg_read(DEVICE_SAMPLE_AT_RESET1_REG) >> 15) & 0x1;
+
+	switch (value) {
+	case (0x0):
+		return 250000000;
+	case (0x1):
+		return 200000000;
+	default:
+		return 0xffffffff;
+	}
+}
+
+u32 mv_board_id_index_get(u32 board_id)
+{
+	/*
+	 * Marvell Boards use 0x10 as base for Board ID:
+	 * mask MSB to receive index for board ID
+	 */
+	return board_id & (MARVELL_BOARD_ID_MASK - 1);
+}
+
+/*
+ * sys_env_suspend_wakeup_check
+ * DESCRIPTION:		Reads GPIO input for suspend-wakeup indication.
+ * INPUT:		None.
+ * OUTPUT:
+ * RETURNS:		u32 indicating suspend wakeup status:
+ * 0 - Not supported,
+ * 1 - supported: read magic word detect wakeup,
+ * 2 - detected wakeup from GPIO.
+ */
+enum suspend_wakeup_status sys_env_suspend_wakeup_check(void)
+{
+	u32 reg, board_id_index, gpio;
+	struct board_wakeup_gpio board_gpio[] = MV_BOARD_WAKEUP_GPIO_INFO;
+
+	board_id_index = mv_board_id_index_get(mv_board_id_get());
+	if (!(sizeof(board_gpio) / sizeof(struct board_wakeup_gpio) >
+	      board_id_index)) {
+		printf("\n_failed loading Suspend-Wakeup information (invalid board ID)\n");
+		return SUSPEND_WAKEUP_DISABLED;
+	}
+
+	/*
+	 * - Detect if Suspend-Wakeup is supported on current board
+	 * - Fetch the GPIO number for wakeup status input indication
+	 */
+	if (board_gpio[board_id_index].gpio_num == -1) {
+		/* Suspend to RAM is not supported */
+		return SUSPEND_WAKEUP_DISABLED;
+	} else if (board_gpio[board_id_index].gpio_num == -2) {
+		/*
+		 * Suspend to RAM is supported but GPIO indication is
+		 * not implemented - Skip
+		 */
+		return SUSPEND_WAKEUP_ENABLED;
+	} else {
+		gpio = board_gpio[board_id_index].gpio_num;
+	}
+
+	/* Initialize MPP for GPIO (set MPP = 0x0) */
+	reg = reg_read(MPP_CONTROL_REG(MPP_REG_NUM(gpio)));
+	/* reset MPP21 to 0x0, keep rest of MPP settings*/
+	reg &= ~MPP_MASK(gpio);
+	reg_write(MPP_CONTROL_REG(MPP_REG_NUM(gpio)), reg);
+
+	/* Initialize GPIO as input */
+	reg = reg_read(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio)));
+	reg |= GPP_MASK(gpio);
+	reg_write(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio)), reg);
+
+	/*
+	 * Check GPP for input status from PIC: 0 - regular init,
+	 * 1 - suspend wakeup
+	 */
+	reg = reg_read(GPP_DATA_IN_REG(GPP_REG_NUM(gpio)));
+
+	/* if GPIO is ON: wakeup from S2RAM indication detected */
+	return (reg & GPP_MASK(gpio)) ? SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED :
+		SUSPEND_WAKEUP_DISABLED;
+}
+
+/*
+ * mv_ctrl_dev_id_index_get
+ *
+ * DESCRIPTION: return SOC device index
+ * INPUT: None
+ * OUTPUT: None
+ * RETURN:
+ *        return SOC device index
+ */
+u32 sys_env_id_index_get(u32 ctrl_model)
+{
+	switch (ctrl_model) {
+	case MV_6820_DEV_ID:
+		return MV_6820_INDEX;
+	case MV_6810_DEV_ID:
+		return MV_6810_INDEX;
+	case MV_6811_DEV_ID:
+		return MV_6811_INDEX;
+	case MV_6828_DEV_ID:
+		return MV_6828_INDEX;
+	case MV_6920_DEV_ID:
+		return MV_6920_INDEX;
+	case MV_6928_DEV_ID:
+		return MV_6928_INDEX;
+	default:
+		return MV_6820_INDEX;
+	}
+}
+
+u32 sys_env_unit_max_num_get(enum unit_id unit)
+{
+	u32 dev_id_index;
+
+	if (unit >= MAX_UNITS_ID) {
+		printf("%s: Error: Wrong unit type (%u)\n", __func__, unit);
+		return 0;
+	}
+
+	dev_id_index = sys_env_id_index_get(sys_env_model_get());
+	return sys_env_soc_unit_nums[unit][dev_id_index];
+}
+
+/*
+ * sys_env_model_get
+ * DESCRIPTION:	Returns 16bit describing the device model (ID) as defined
+ *		in Vendor ID configuration register
+ */
+u16 sys_env_model_get(void)
+{
+	u32 default_ctrl_id, ctrl_id = reg_read(DEV_ID_REG);
+	ctrl_id = (ctrl_id & (DEV_ID_REG_DEVICE_ID_MASK)) >>
+		DEV_ID_REG_DEVICE_ID_OFFS;
+
+	switch (ctrl_id) {
+	case MV_6820_DEV_ID:
+	case MV_6810_DEV_ID:
+	case MV_6811_DEV_ID:
+	case MV_6828_DEV_ID:
+	case MV_6920_DEV_ID:
+	case MV_6928_DEV_ID:
+		return ctrl_id;
+	default:
+		/* Device ID Default for A38x: 6820 , for A39x: 6920 */
+		default_ctrl_id =  MV_6820_DEV_ID;
+		printf("%s: Error retrieving device ID (%x), using default ID = %x\n",
+		       __func__, ctrl_id, default_ctrl_id);
+		return default_ctrl_id;
+	}
+}
+
+/*
+ * sys_env_device_id_get
+ * DESCRIPTION:	Returns enum (0..7) index of the device model (ID)
+ */
+u32 sys_env_device_id_get(void)
+{
+	char *device_id_str[7] = {
+		"6810", "6820", "6811", "6828", "NONE", "6920", "6928"
+	};
+
+	if (g_dev_id != -1)
+		return g_dev_id;
+
+	g_dev_id = reg_read(DEVICE_SAMPLE_AT_RESET1_REG);
+	g_dev_id = g_dev_id >> SAR_DEV_ID_OFFS & SAR_DEV_ID_MASK;
+	printf("Detected Device ID %s\n", device_id_str[g_dev_id]);
+
+	return g_dev_id;
+}
+
+/*
+ * sys_env_device_rev_get - Get Marvell controller device revision number
+ *
+ * DESCRIPTION:
+ *       This function returns 8bit describing the device revision as defined
+ *       Revision ID Register.
+ *
+ * INPUT:
+ *       None.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       8bit desscribing Marvell controller revision number
+ */
+u8 sys_env_device_rev_get(void)
+{
+	u32 value;
+
+	value = reg_read(DEV_VERSION_ID_REG);
+	return (value & (REVISON_ID_MASK)) >> REVISON_ID_OFFS;
+}
+
+void mv_rtc_config(void)
+{
+	u32 i, val;
+
+	/* Activate pipe0 for read/write transaction, and set XBAR client number #1 */
+	val = 0x1 << DFX_PIPE_SELECT_PIPE0_ACTIVE_OFFS |
+	      0x1 << DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS;
+	writel(val, MVEBU_DFX_BASE);
+
+	/* Set new RTC value for all memory wrappers */
+	for (i = 0; i < RTC_MEMORY_WRAPPER_COUNT; i++)
+		reg_write(RTC_MEMORY_WRAPPER_REG(i), RTC_MEMORY_WRAPPER_CTRL_VAL);
+}
+
+void mv_avs_init(void)
+{
+	u32 sar_freq;
+
+	reg_write(AVS_DEBUG_CNTR_REG, AVS_DEBUG_CNTR_DEFAULT_VALUE);
+	reg_write(AVS_DEBUG_CNTR_REG, AVS_DEBUG_CNTR_DEFAULT_VALUE);
+
+	sar_freq = reg_read(DEVICE_SAMPLE_AT_RESET1_REG);
+	sar_freq = sar_freq >> SAR_FREQ_OFFSET & SAR_FREQ_MASK;
+
+	/* Set AVS value only for core frequency of 1600MHz or less.
+	 * For higher frequency leave the default value.
+	 */
+	if (sar_freq <= 0xd) {
+		u32 avs_reg_data = reg_read(AVS_ENABLED_CONTROL);
+
+		avs_reg_data &= ~(AVS_LOW_VDD_LIMIT_MASK
+				| AVS_HIGH_VDD_LIMIT_MASK);
+		avs_reg_data |= AVS_LOW_VDD_SLOW_VAL | AVS_HIGH_VDD_SLOW_VAL;
+		reg_write(AVS_ENABLED_CONTROL, avs_reg_data);
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
new file mode 100644
index 000000000..118bf5660
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
@@ -0,0 +1,351 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#ifndef _SYS_ENV_LIB_H
+#define _SYS_ENV_LIB_H
+
+#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h"
+
+/* Serdes definitions */
+#define COMMON_PHY_BASE_ADDR		0x18300
+
+#define DEVICE_CONFIGURATION_REG0	0x18284
+#define DEVICE_CONFIGURATION_REG1	0x18288
+#define COMMON_PHY_CONFIGURATION1_REG	0x18300
+#define COMMON_PHY_CONFIGURATION2_REG	0x18304
+#define COMMON_PHY_CONFIGURATION4_REG	0x1830c
+#define COMMON_PHY_STATUS1_REG		0x18318
+#define COMMON_PHYS_SELECTORS_REG	0x183fc
+#define SOC_CONTROL_REG1		0x18204
+#define GENERAL_PURPOSE_RESERVED0_REG	0x182e0
+#define GBE_CONFIGURATION_REG		0x18460
+#define DEVICE_SAMPLE_AT_RESET1_REG	0x18600
+#define DEVICE_SAMPLE_AT_RESET2_REG	0x18604
+#define DEV_ID_REG			0x18238
+
+#define CORE_PLL_PARAMETERS_REG		0xe42e0
+#define CORE_PLL_CONFIG_REG		0xe42e4
+
+#define QSGMII_CONTROL_REG1		0x18494
+
+#define DEV_ID_REG_DEVICE_ID_OFFS	16
+#define DEV_ID_REG_DEVICE_ID_MASK	0xffff0000
+
+#define SAR_FREQ_OFFSET			10
+#define SAR_FREQ_MASK			0x1f
+#define SAR_DEV_ID_OFFS			27
+#define SAR_DEV_ID_MASK			0x7
+
+#define POWER_AND_PLL_CTRL_REG		0xa0004
+#define CALIBRATION_CTRL_REG		0xa0008
+#define DFE_REG0			0xa001c
+#define DFE_REG3			0xa0028
+#define RESET_DFE_REG			0xa0148
+#define LOOPBACK_REG			0xa008c
+#define SYNC_PATTERN_REG		0xa0090
+#define INTERFACE_REG			0xa0094
+#define ISOLATE_REG			0xa0098
+#define MISC_REG			0xa013c
+#define GLUE_REG			0xa0140
+#define GENERATION_DIVIDER_FORCE_REG	0xa0144
+#define PCIE_REG0			0xa0120
+#define LANE_ALIGN_REG0			0xa0124
+#define SQUELCH_FFE_SETTING_REG		0xa0018
+#define G1_SETTINGS_0_REG		0xa0034
+#define G1_SETTINGS_1_REG		0xa0038
+#define G1_SETTINGS_3_REG		0xa0440
+#define G1_SETTINGS_4_REG		0xa0444
+#define G2_SETTINGS_0_REG		0xa003c
+#define G2_SETTINGS_1_REG		0xa0040
+#define G2_SETTINGS_2_REG		0xa00f8
+#define G2_SETTINGS_3_REG		0xa0448
+#define G2_SETTINGS_4_REG		0xa044c
+#define G3_SETTINGS_0_REG		0xa0044
+#define G3_SETTINGS_1_REG		0xa0048
+#define G3_SETTINGS_3_REG		0xa0450
+#define G3_SETTINGS_4_REG		0xa0454
+#define VTHIMPCAL_CTRL_REG		0xa0104
+#define REF_REG0			0xa0134
+#define CAL_REG6			0xa0168
+#define RX_REG2				0xa0184
+#define RX_REG3				0xa0188
+#define PCIE_REG1			0xa0288
+#define PCIE_REG3			0xa0290
+#define LANE_CFG0_REG			0xa0600
+#define LANE_CFG1_REG			0xa0604
+#define LANE_CFG4_REG			0xa0620
+#define LANE_CFG5_REG			0xa0624
+#define GLOBAL_CLK_CTRL			0xa0704
+#define GLOBAL_MISC_CTRL		0xa0718
+#define GLOBAL_CLK_SRC_HI		0xa0710
+
+#define GLOBAL_CLK_CTRL			0xa0704
+#define GLOBAL_MISC_CTRL		0xa0718
+#define GLOBAL_PM_CTRL			0xa0740
+
+/* SATA registers */
+#define SATA_CTRL_REG_IND_ADDR		0xa80a0
+#define SATA_CTRL_REG_IND_DATA		0xa80a4
+
+#define SATA_VENDOR_PORT_0_REG_ADDR	0xa8178
+#define SATA_VENDOR_PORT_1_REG_ADDR	0xa81f8
+#define SATA_VENDOR_PORT_0_REG_DATA	0xa817c
+#define SATA_VENDOR_PORT_1_REG_DATA	0xa81fc
+
+/* Reference clock values and mask */
+#define POWER_AND_PLL_CTRL_REG_100MHZ_VAL	0x0
+#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1	0x1
+#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2	0x2
+#define POWER_AND_PLL_CTRL_REG_40MHZ_VAL	0x3
+#define GLOBAL_PM_CTRL_REG_25MHZ_VAL		0x7
+#define GLOBAL_PM_CTRL_REG_40MHZ_VAL		0xc
+#define LANE_CFG4_REG_25MHZ_VAL			0x200
+#define LANE_CFG4_REG_40MHZ_VAL			0x300
+
+#define POWER_AND_PLL_CTRL_REG_MASK		(~(0x1f))
+#define GLOBAL_PM_CTRL_REG_MASK			(~(0xff))
+#define LANE_CFG4_REG_MASK			(~(0x1f00))
+
+#define REF_CLK_SELECTOR_VAL_PEX0(reg_val)	(reg_val >> 2) & 0x1
+#define REF_CLK_SELECTOR_VAL_PEX1(reg_val)	(reg_val >> 3) & 0x1
+#define REF_CLK_SELECTOR_VAL_PEX2(reg_val)	(reg_val >> 30) & 0x1
+#define REF_CLK_SELECTOR_VAL_PEX3(reg_val)	(reg_val >> 31) & 0x1
+#define REF_CLK_SELECTOR_VAL(reg_val)		(reg_val & 0x1)
+
+#define MAX_SELECTOR_VAL			10
+
+/* TWSI addresses */
+/* starting from A38x A0, i2c address of EEPROM is 0x57 */
+#define EEPROM_I2C_ADDR			(sys_env_device_rev_get() == \
+					 MV_88F68XX_Z1_ID ? 0x50 : 0x57)
+#define RD_GET_MODE_ADDR		0x4c
+#define DB_GET_MODE_SLM1363_ADDR	0x25
+#define DB_GET_MODE_SLM1364_ADDR	0x24
+#define DB381_GET_MODE_SLM1426_1427_ADDR 0x56
+
+/* DB-BP Board 'SatR' mapping */
+#define SATR_DB_LANE1_MAX_OPTIONS	7
+#define SATR_DB_LANE1_CFG_MASK		0x7
+#define SATR_DB_LANE1_CFG_OFFSET	0
+#define SATR_DB_LANE2_MAX_OPTIONS	4
+#define SATR_DB_LANE2_CFG_MASK		0x38
+#define SATR_DB_LANE2_CFG_OFFSET	3
+
+/* GP Board 'SatR' mapping */
+#define SATR_GP_LANE1_CFG_MASK		0x4
+#define SATR_GP_LANE1_CFG_OFFSET	2
+#define SATR_GP_LANE2_CFG_MASK		0x8
+#define SATR_GP_LANE2_CFG_OFFSET	3
+
+/* For setting MPP2 and MPP3 to be TWSI mode and MPP 0,1 to UART mode */
+#define MPP_CTRL_REG			0x18000
+#define MPP_SET_MASK			(~(0xffff))
+#define MPP_SET_DATA			(0x1111)
+#define MPP_UART1_SET_MASK		(~(0xff000))
+#define MPP_UART1_SET_DATA		(0x66000)
+
+#define DFX_PIPE_SELECT_PIPE0_ACTIVE_OFFS	0
+/* DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS: Since address completion in 14bit
+ * address mode, and given that [14:8] => [19:13], the 2 lower bits [9:8] =>
+ * [14:13] are dismissed. hence field offset is also shifted to 10
+ */
+#define DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS	10
+
+#define RTC_MEMORY_CTRL_REG_BASE	0xE6000
+#define RTC_MEMORY_WRAPPER_COUNT	8
+#define RTC_MEMORY_WRAPPER_REG(i)	(RTC_MEMORY_CTRL_REG_BASE + ((i) * 0x40))
+#define RTC_MEMORY_CTRL_PDLVMC_FIELD_OFFS	6
+#define RTC_MEMORY_WRAPPER_CTRL_VAL	(0x1 << RTC_MEMORY_CTRL_PDLVMC_FIELD_OFFS)
+
+#define AVS_DEBUG_CNTR_REG		0xe4124
+#define AVS_DEBUG_CNTR_DEFAULT_VALUE	0x08008073
+
+#define AVS_ENABLED_CONTROL		0xe4130
+#define AVS_LOW_VDD_LIMIT_OFFS		4
+#define AVS_LOW_VDD_LIMIT_MASK		(0xff << AVS_LOW_VDD_LIMIT_OFFS)
+#define AVS_LOW_VDD_LIMIT_VAL		(0x27 << AVS_LOW_VDD_LIMIT_OFFS)
+#define AVS_LOW_VDD_SLOW_VAL		(0x23 << AVS_LOW_VDD_LIMIT_OFFS)
+
+#define AVS_HIGH_VDD_LIMIT_OFFS		12
+#define AVS_HIGH_VDD_LIMIT_MASK		(0xff << AVS_HIGH_VDD_LIMIT_OFFS)
+#define AVS_HIGH_VDD_LIMIT_VAL		(0x27 << AVS_HIGH_VDD_LIMIT_OFFS)
+#define AVS_HIGH_VDD_SLOW_VAL		(0x23 << AVS_HIGH_VDD_LIMIT_OFFS)
+
+/* Board ID numbers */
+#define MARVELL_BOARD_ID_MASK		0x10
+/* Customer boards for A38x */
+#define A38X_CUSTOMER_BOARD_ID_BASE	0x0
+#define A38X_CUSTOMER_BOARD_ID0		(A38X_CUSTOMER_BOARD_ID_BASE + 0)
+#define A38X_CUSTOMER_BOARD_ID1		(A38X_CUSTOMER_BOARD_ID_BASE + 1)
+#define A38X_MV_MAX_CUSTOMER_BOARD_ID	(A38X_CUSTOMER_BOARD_ID_BASE + 2)
+#define A38X_MV_CUSTOMER_BOARD_NUM	(A38X_MV_MAX_CUSTOMER_BOARD_ID - \
+					 A38X_CUSTOMER_BOARD_ID_BASE)
+
+/* Marvell boards for A38x */
+#define A38X_MARVELL_BOARD_ID_BASE	0x10
+#define RD_NAS_68XX_ID			(A38X_MARVELL_BOARD_ID_BASE + 0)
+#define DB_68XX_ID			(A38X_MARVELL_BOARD_ID_BASE + 1)
+#define RD_AP_68XX_ID			(A38X_MARVELL_BOARD_ID_BASE + 2)
+#define DB_AP_68XX_ID			(A38X_MARVELL_BOARD_ID_BASE + 3)
+#define DB_GP_68XX_ID			(A38X_MARVELL_BOARD_ID_BASE + 4)
+#define DB_BP_6821_ID			(A38X_MARVELL_BOARD_ID_BASE + 5)
+#define DB_AMC_6820_ID			(A38X_MARVELL_BOARD_ID_BASE + 6)
+#define A38X_MV_MAX_MARVELL_BOARD_ID	(A38X_MARVELL_BOARD_ID_BASE + 7)
+#define A38X_MV_MARVELL_BOARD_NUM	(A38X_MV_MAX_MARVELL_BOARD_ID - \
+					 A38X_MARVELL_BOARD_ID_BASE)
+
+/* Customer boards for A39x */
+#define A39X_CUSTOMER_BOARD_ID_BASE	0x20
+#define A39X_CUSTOMER_BOARD_ID0		(A39X_CUSTOMER_BOARD_ID_BASE + 0)
+#define A39X_CUSTOMER_BOARD_ID1		(A39X_CUSTOMER_BOARD_ID_BASE + 1)
+#define A39X_MV_MAX_CUSTOMER_BOARD_ID	(A39X_CUSTOMER_BOARD_ID_BASE + 2)
+#define A39X_MV_CUSTOMER_BOARD_NUM	(A39X_MV_MAX_CUSTOMER_BOARD_ID - \
+					 A39X_CUSTOMER_BOARD_ID_BASE)
+
+/* Marvell boards for A39x */
+#define A39X_MARVELL_BOARD_ID_BASE	0x30
+#define A39X_DB_69XX_ID			(A39X_MARVELL_BOARD_ID_BASE + 0)
+#define A39X_RD_69XX_ID			(A39X_MARVELL_BOARD_ID_BASE + 1)
+#define A39X_MV_MAX_MARVELL_BOARD_ID	(A39X_MARVELL_BOARD_ID_BASE + 2)
+#define A39X_MV_MARVELL_BOARD_NUM	(A39X_MV_MAX_MARVELL_BOARD_ID - \
+					 A39X_MARVELL_BOARD_ID_BASE)
+
+#define CUTOMER_BOARD_ID_BASE		A38X_CUSTOMER_BOARD_ID_BASE
+#define CUSTOMER_BOARD_ID0		A38X_CUSTOMER_BOARD_ID0
+#define CUSTOMER_BOARD_ID1		A38X_CUSTOMER_BOARD_ID1
+#define MV_MAX_CUSTOMER_BOARD_ID	A38X_MV_MAX_CUSTOMER_BOARD_ID
+#define MV_CUSTOMER_BOARD_NUM		A38X_MV_CUSTOMER_BOARD_NUM
+#define MARVELL_BOARD_ID_BASE		A38X_MARVELL_BOARD_ID_BASE
+#define MV_MAX_MARVELL_BOARD_ID		A38X_MV_MAX_MARVELL_BOARD_ID
+#define MV_MARVELL_BOARD_NUM		A38X_MV_MARVELL_BOARD_NUM
+#define MV_DEFAULT_BOARD_ID		DB_68XX_ID
+#define MV_DEFAULT_DEVICE_ID		MV_6811
+
+#define MV_INVALID_BOARD_ID		0xffffffff
+
+/* device revesion */
+#define DEV_VERSION_ID_REG		0x1823c
+#define REVISON_ID_OFFS			8
+#define REVISON_ID_MASK			0xf00
+
+/* A38x revisions */
+#define MV_88F68XX_Z1_ID		0x0
+#define MV_88F68XX_A0_ID		0x4
+#define MV_88F68XX_B0_ID		0xa
+/* A39x revisions */
+#define MV_88F69XX_Z1_ID		0x2
+
+#define MPP_CONTROL_REG(id)		(0x18000 + (id * 4))
+#define GPP_DATA_OUT_REG(grp)		(MV_GPP_REGS_BASE(grp) + 0x00)
+#define GPP_DATA_OUT_EN_REG(grp)	(MV_GPP_REGS_BASE(grp) + 0x04)
+#define GPP_DATA_IN_REG(grp)		(MV_GPP_REGS_BASE(grp) + 0x10)
+#define MV_GPP_REGS_BASE(unit)		(0x18100 + ((unit) * 0x40))
+
+#define MPP_REG_NUM(GPIO_NUM)		(GPIO_NUM / 8)
+#define MPP_MASK(GPIO_NUM)		(0xf << 4 * (GPIO_NUM - \
+					(MPP_REG_NUM(GPIO_NUM) * 8)));
+#define GPP_REG_NUM(GPIO_NUM)		(GPIO_NUM / 32)
+#define GPP_MASK(GPIO_NUM)		(1 << GPIO_NUM % 32)
+
+/* device ID */
+/* Armada 38x Family */
+#define MV_6810_DEV_ID		0x6810
+#define MV_6811_DEV_ID		0x6811
+#define MV_6820_DEV_ID		0x6820
+#define MV_6828_DEV_ID		0x6828
+/* Armada 39x Family */
+#define MV_6920_DEV_ID		0x6920
+#define MV_6928_DEV_ID		0x6928
+
+enum {
+	MV_6810,
+	MV_6820,
+	MV_6811,
+	MV_6828,
+	MV_NONE,
+	MV_6920,
+	MV_6928,
+	MV_MAX_DEV_ID,
+};
+
+#define MV_6820_INDEX			0
+#define MV_6810_INDEX			1
+#define MV_6811_INDEX			2
+#define MV_6828_INDEX			3
+
+#define MV_6920_INDEX			0
+#define MV_6928_INDEX			1
+
+#define MAX_DEV_ID_NUM			4
+
+#define MV_6820_INDEX			0
+#define MV_6810_INDEX			1
+#define MV_6811_INDEX			2
+#define MV_6828_INDEX			3
+#define MV_6920_INDEX			0
+#define MV_6928_INDEX			1
+
+enum unit_id {
+	PEX_UNIT_ID,
+	ETH_GIG_UNIT_ID,
+	USB3H_UNIT_ID,
+	USB3D_UNIT_ID,
+	SATA_UNIT_ID,
+	QSGMII_UNIT_ID,
+	XAUI_UNIT_ID,
+	RXAUI_UNIT_ID,
+	MAX_UNITS_ID
+};
+
+struct board_wakeup_gpio {
+	u32 board_id;
+	int gpio_num;
+};
+
+enum suspend_wakeup_status {
+	SUSPEND_WAKEUP_DISABLED,
+	SUSPEND_WAKEUP_ENABLED,
+	SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED,
+};
+
+/*
+ * GPIO status indication for Suspend Wakeup:
+ * If suspend to RAM is supported and GPIO inidcation is implemented,
+ * set the gpio number
+ * If suspend to RAM is supported but GPIO indication is not implemented
+ * set '-2'
+ * If suspend to RAM is not supported set '-1'
+ */
+#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
+#define MV_BOARD_WAKEUP_GPIO_INFO {		\
+	{A38X_CUSTOMER_BOARD_ID0,	-1 },	\
+	{A38X_CUSTOMER_BOARD_ID0,	-1 },	\
+};
+
+#else
+
+#define MV_BOARD_WAKEUP_GPIO_INFO {	\
+	{RD_NAS_68XX_ID, -2 },		\
+	{DB_68XX_ID,	 -1 },		\
+	{RD_AP_68XX_ID,	 -2 },		\
+	{DB_AP_68XX_ID,	 -2 },		\
+	{DB_GP_68XX_ID,	 -2 },		\
+	{DB_BP_6821_ID,	 -2 },		\
+	{DB_AMC_6820_ID, -2 },		\
+};
+#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */
+
+u32 mv_board_tclk_get(void);
+u32 mv_board_id_get(void);
+u32 mv_board_id_index_get(u32 board_id);
+u32 sys_env_unit_max_num_get(enum unit_id unit);
+enum suspend_wakeup_status sys_env_suspend_wakeup_check(void);
+u8 sys_env_device_rev_get(void);
+u32 sys_env_device_id_get(void);
+u16 sys_env_model_get(void);
+struct dlb_config *sys_env_dlb_config_ptr_get(void);
+u32 sys_env_get_cs_ena_from_reg(void);
+
+#endif /* _SYS_ENV_LIB_H */
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/Makefile b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/Makefile
new file mode 100644
index 000000000..897afb703
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_SPL_BUILD)	= high_speed_env_lib.o
+obj-$(CONFIG_SPL_BUILD)	+= high_speed_env_spec.o
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h
new file mode 100644
index 000000000..9c3e7c082
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h
@@ -0,0 +1,261 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#ifndef __BOARD_ENV_SPEC
+#define __BOARD_ENV_SPEC
+
+/* Board specific configuration */
+
+/* KW40 */
+#define MV_6710_DEV_ID			0x6710
+
+#define MV_6710_Z1_REV			0x0
+#define MV_6710_Z1_ID			((MV_6710_DEV_ID << 16) | MV_6710_Z1_REV)
+#define MV_6710_Z1_NAME			"MV6710 Z1"
+
+/* Armada XP Family */
+#define MV_78130_DEV_ID			0x7813
+#define MV_78160_DEV_ID			0x7816
+#define MV_78230_DEV_ID			0x7823
+#define MV_78260_DEV_ID			0x7826
+#define MV_78460_DEV_ID			0x7846
+#define MV_78000_DEV_ID			0x7888
+
+#define MV_FPGA_DEV_ID			0x2107
+
+#define MV_78XX0_Z1_REV			0x0
+
+/* boards ID numbers */
+#define BOARD_ID_BASE			0x0
+
+/* New board ID numbers */
+#define DB_88F78XX0_BP_ID		(BOARD_ID_BASE + 1)
+#define RD_78460_SERVER_ID		(DB_88F78XX0_BP_ID + 1)
+#define DB_78X60_PCAC_ID		(RD_78460_SERVER_ID + 1)
+#define FPGA_88F78XX0_ID		(DB_78X60_PCAC_ID + 1)
+#define DB_88F78XX0_BP_REV2_ID		(FPGA_88F78XX0_ID + 1)
+#define RD_78460_NAS_ID			(DB_88F78XX0_BP_REV2_ID + 1)
+#define DB_78X60_AMC_ID			(RD_78460_NAS_ID + 1)
+#define DB_78X60_PCAC_REV2_ID		(DB_78X60_AMC_ID + 1)
+#define RD_78460_SERVER_REV2_ID		(DB_78X60_PCAC_REV2_ID + 1)
+#define DB_784MP_GP_ID			(RD_78460_SERVER_REV2_ID + 1)
+#define RD_78460_CUSTOMER_ID		(DB_784MP_GP_ID + 1)
+#define MV_MAX_BOARD_ID			(RD_78460_CUSTOMER_ID + 1)
+#define INVALID_BOARD_ID		0xFFFFFFFF
+
+/* Sample at Reset */
+#define MPP_SAMPLE_AT_RESET(id)		(0x18230 + (id * 4))
+
+/* BIOS Modes related defines */
+
+#define SAR0_BOOTWIDTH_OFFSET		3
+#define SAR0_BOOTWIDTH_MASK		(0x3 << SAR0_BOOTWIDTH_OFFSET)
+#define SAR0_BOOTSRC_OFFSET		5
+#define SAR0_BOOTSRC_MASK		(0xF << SAR0_BOOTSRC_OFFSET)
+
+#define SAR0_L2_SIZE_OFFSET		19
+#define SAR0_L2_SIZE_MASK		(0x3 << SAR0_L2_SIZE_OFFSET)
+#define SAR0_CPU_FREQ_OFFSET		21
+#define SAR0_CPU_FREQ_MASK		(0x7 << SAR0_CPU_FREQ_OFFSET)
+#define SAR0_FABRIC_FREQ_OFFSET		24
+#define SAR0_FABRIC_FREQ_MASK		(0xF << SAR0_FABRIC_FREQ_OFFSET)
+#define SAR0_CPU0CORE_OFFSET		31
+#define SAR0_CPU0CORE_MASK		(0x1 << SAR0_CPU0CORE_OFFSET)
+#define SAR1_CPU0CORE_OFFSET		0
+#define SAR1_CPU0CORE_MASK		(0x1 << SAR1_CPU0CORE_OFFSET)
+
+#define PEX_CLK_100MHZ_OFFSET		2
+#define PEX_CLK_100MHZ_MASK		(0x1 << PEX_CLK_100MHZ_OFFSET)
+
+#define SAR1_FABRIC_MODE_OFFSET		19
+#define SAR1_FABRIC_MODE_MASK		(0x1 << SAR1_FABRIC_MODE_OFFSET)
+#define SAR1_CPU_MODE_OFFSET		20
+#define SAR1_CPU_MODE_MASK		(0x1 << SAR1_CPU_MODE_OFFSET)
+
+#define SAR_CPU_FAB_GET(cpu, fab)	(((cpu & 0x7) << 21) | ((fab & 0xF) << 24))
+
+
+#define CORE_AVS_CONTROL_0REG		0x18300
+#define CORE_AVS_CONTROL_2REG		0x18308
+#define CPU_AVS_CONTROL2_REG		0x20868
+#define CPU_AVS_CONTROL0_REG		0x20860
+#define GENERAL_PURPOSE_RESERVED0_REG	0x182E0
+
+#define MSAR_TCLK_OFFS			28
+#define MSAR_TCLK_MASK			(0x1 << MSAR_TCLK_OFFS)
+
+
+/* Controler environment registers offsets */
+#define GEN_PURP_RES_1_REG		0x182F4
+#define GEN_PURP_RES_2_REG		0x182F8
+
+/* registers offsets */
+#define MV_GPP_REGS_OFFSET(unit)	(0x18100 + ((unit) * 0x40))
+#define MPP_CONTROL_REG(id)		(0x18000 + (id * 4))
+#define MV_GPP_REGS_BASE(unit)		(MV_GPP_REGS_OFFSET(unit))
+#define MV_GPP_REGS_BASE_0		(MV_GPP_REGS_OFFSET_0)
+
+#define GPP_DATA_OUT_REG(grp)		(MV_GPP_REGS_BASE(grp) + 0x00)
+#define GPP_DATA_OUT_REG_0		(MV_GPP_REGS_BASE_0 + 0x00)	/* Used in .S files */
+#define GPP_DATA_OUT_EN_REG(grp)	(MV_GPP_REGS_BASE(grp) + 0x04)
+#define GPP_BLINK_EN_REG(grp)		(MV_GPP_REGS_BASE(grp) + 0x08)
+#define GPP_DATA_IN_POL_REG(grp)	(MV_GPP_REGS_BASE(grp) + 0x0C)
+#define GPP_DATA_IN_REG(grp)		(MV_GPP_REGS_BASE(grp) + 0x10)
+#define GPP_INT_CAUSE_REG(grp)		(MV_GPP_REGS_BASE(grp) + 0x14)
+#define GPP_INT_MASK_REG(grp)		(MV_GPP_REGS_BASE(grp) + 0x18)
+#define GPP_INT_LVL_REG(grp)		(MV_GPP_REGS_BASE(grp) + 0x1C)
+#define GPP_OUT_SET_REG(grp)		(0x18130 + ((grp) * 0x40))
+#define GPP_64_66_DATA_OUT_SET_REG	0x181A4
+#define GPP_OUT_CLEAR_REG(grp)		(0x18134 + ((grp) * 0x40))
+#define GPP_64_66_DATA_OUT_CLEAR_REG	0x181B0
+#define GPP_FUNC_SELECT_REG		(MV_GPP_REGS_BASE(0) + 0x40)
+
+#define MV_GPP66			(1 << 2)
+
+/* Relevant for MV78XX0 */
+#define GPP_DATA_OUT_SET_REG		(MV_GPP_REGS_BASE(0) + 0x20)
+#define GPP_DATA_OUT_CLEAR_REG		(MV_GPP_REGS_BASE(0) + 0x24)
+
+/* This define describes the maximum number of supported PEX Interfaces */
+#define MV_PEX_MAX_IF			10
+#define MV_PEX_MAX_UNIT			4
+
+#define MV_SERDES_NUM_TO_PEX_NUM(num)	((num < 8) ? (num) : (8 + (num / 12)))
+
+#define PEX_PHY_ACCESS_REG(unit)	(0x40000 + ((unit) % 2 * 0x40000) + \
+					 ((unit)/2 * 0x2000) + 0x1B00)
+
+#define SATA_BASE_REG(port)		(0xA2000 + (port)*0x2000)
+
+#define SATA_PWR_PLL_CTRL_REG(port)	(SATA_BASE_REG(port) + 0x804)
+#define SATA_DIG_LP_ENA_REG(port)	(SATA_BASE_REG(port) + 0x88C)
+#define SATA_REF_CLK_SEL_REG(port)	(SATA_BASE_REG(port) + 0x918)
+#define SATA_COMPHY_CTRL_REG(port)	(SATA_BASE_REG(port) + 0x920)
+#define SATA_LP_PHY_EXT_CTRL_REG(port)	(SATA_BASE_REG(port) + 0x058)
+#define SATA_LP_PHY_EXT_STAT_REG(port)	(SATA_BASE_REG(port) + 0x05C)
+#define SATA_IMP_TX_SSC_CTRL_REG(port)	(SATA_BASE_REG(port) + 0x810)
+#define SATA_GEN_1_SET_0_REG(port)	(SATA_BASE_REG(port) + 0x834)
+#define SATA_GEN_1_SET_1_REG(port)	(SATA_BASE_REG(port) + 0x838)
+#define SATA_GEN_2_SET_0_REG(port)	(SATA_BASE_REG(port) + 0x83C)
+#define SATA_GEN_2_SET_1_REG(port)	(SATA_BASE_REG(port) + 0x840)
+
+#define MV_ETH_BASE_ADDR		(0x72000)
+#define MV_ETH_REGS_OFFSET(port)	(MV_ETH_BASE_ADDR - ((port) / 2) * \
+					 0x40000 + ((port) % 2) * 0x4000)
+#define MV_ETH_REGS_BASE(port)		MV_ETH_REGS_OFFSET(port)
+
+
+#define SGMII_PWR_PLL_CTRL_REG(port)	(MV_ETH_REGS_BASE(port) + 0xE04)
+#define SGMII_DIG_LP_ENA_REG(port)	(MV_ETH_REGS_BASE(port) + 0xE8C)
+#define SGMII_REF_CLK_SEL_REG(port)	(MV_ETH_REGS_BASE(port) + 0xF18)
+#define SGMII_SERDES_CFG_REG(port)	(MV_ETH_REGS_BASE(port) + 0x4A0)
+#define SGMII_SERDES_STAT_REG(port)	(MV_ETH_REGS_BASE(port) + 0x4A4)
+#define SGMII_COMPHY_CTRL_REG(port)	(MV_ETH_REGS_BASE(port) + 0xF20)
+#define QSGMII_GEN_1_SETTING_REG(port)	(MV_ETH_REGS_BASE(port) + 0xE38)
+#define QSGMII_SERDES_CFG_REG(port)	(MV_ETH_REGS_BASE(port) + 0x4a0)
+
+#define SERDES_LINE_MUX_REG_0_7		0x18270
+#define SERDES_LINE_MUX_REG_8_15	0x18274
+#define QSGMII_CONTROL_1_REG		0x18404
+
+/* SOC_CTRL_REG fields */
+#define SCR_PEX_ENA_OFFS(pex)		((pex) & 0x3)
+#define SCR_PEX_ENA_MASK(pex)		(1 << pex)
+
+#define PCIE0_QUADX1_EN			(1<<7)
+#define PCIE1_QUADX1_EN			(1<<8)
+
+#define SCR_PEX_4BY1_OFFS(pex)		((pex) + 7)
+#define SCR_PEX_4BY1_MASK(pex)		(1 << SCR_PEX_4BY1_OFFS(pex))
+
+#define PCIE1_CLK_OUT_EN_OFF		5
+#define PCIE1_CLK_OUT_EN_MASK		(1 << PCIE1_CLK_OUT_EN_OFF)
+
+#define PCIE0_CLK_OUT_EN_OFF		4
+#define PCIE0_CLK_OUT_EN_MASK		(1 << PCIE0_CLK_OUT_EN_OFF)
+
+#define SCR_PEX0_4BY1_OFFS		7
+#define SCR_PEX0_4BY1_MASK		(1 << SCR_PEX0_4BY1_OFFS)
+
+#define SCR_PEX1_4BY1_OFFS		8
+#define SCR_PEX1_4BY1_MASK		(1 << SCR_PEX1_4BY1_OFFS)
+
+
+#define MV_MISC_REGS_OFFSET		(0x18200)
+#define MV_MISC_REGS_BASE		(MV_MISC_REGS_OFFSET)
+#define SOC_CTRL_REG			(MV_MISC_REGS_BASE + 0x4)
+
+/*
+ * PCI Express Control and Status Registers
+ */
+#define MAX_PEX_DEVICES			32
+#define MAX_PEX_FUNCS			8
+#define MAX_PEX_BUSSES			256
+
+#define PXSR_PEX_BUS_NUM_OFFS		8	/* Bus Number Indication */
+#define PXSR_PEX_BUS_NUM_MASK		(0xff << PXSR_PEX_BUS_NUM_OFFS)
+
+#define PXSR_PEX_DEV_NUM_OFFS		16	/* Device Number Indication */
+#define PXSR_PEX_DEV_NUM_MASK		(0x1f << PXSR_PEX_DEV_NUM_OFFS)
+
+#define PXSR_DL_DOWN			0x1	/* DL_Down indication. */
+#define PXCAR_CONFIG_EN			(1 << 31)
+#define PEX_STATUS_AND_COMMAND		0x004
+#define PXSAC_MABORT			(1 << 29) /* Recieved Master Abort */
+
+/* PCI Express Configuration Address Register */
+
+/* PEX_CFG_ADDR_REG (PXCAR) */
+#define PXCAR_REG_NUM_OFFS		2
+#define PXCAR_REG_NUM_MAX		0x3F
+#define PXCAR_REG_NUM_MASK		(PXCAR_REG_NUM_MAX << PXCAR_REG_NUM_OFFS)
+#define PXCAR_FUNC_NUM_OFFS		8
+#define PXCAR_FUNC_NUM_MAX		0x7
+#define PXCAR_FUNC_NUM_MASK		(PXCAR_FUNC_NUM_MAX << PXCAR_FUNC_NUM_OFFS)
+#define PXCAR_DEVICE_NUM_OFFS		11
+#define PXCAR_DEVICE_NUM_MAX		0x1F
+#define PXCAR_DEVICE_NUM_MASK		(PXCAR_DEVICE_NUM_MAX << PXCAR_DEVICE_NUM_OFFS)
+#define PXCAR_BUS_NUM_OFFS		16
+#define PXCAR_BUS_NUM_MAX		0xFF
+#define PXCAR_BUS_NUM_MASK		(PXCAR_BUS_NUM_MAX << PXCAR_BUS_NUM_OFFS)
+#define PXCAR_EXT_REG_NUM_OFFS		24
+#define PXCAR_EXT_REG_NUM_MAX		0xF
+
+#define PXCAR_REAL_EXT_REG_NUM_OFFS     8
+#define PXCAR_REAL_EXT_REG_NUM_MASK     (0xF << PXCAR_REAL_EXT_REG_NUM_OFFS)
+
+
+#define PEX_CAPABILITIES_REG(if)	((MV_PEX_IF_REGS_BASE(if)) + 0x60)
+#define PEX_LINK_CAPABILITIES_REG(if)	((MV_PEX_IF_REGS_BASE(if)) + 0x6C)
+#define PEX_LINK_CTRL_STATUS_REG(if)	((MV_PEX_IF_REGS_BASE(if)) + 0x70)
+#define PEX_LINK_CTRL_STATUS2_REG(if)	((MV_PEX_IF_REGS_BASE(if)) + 0x90)
+#define PEX_CTRL_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x1A00)
+#define PEX_STATUS_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x1A04)
+#define PEX_COMPLT_TMEOUT_REG(if)	((MV_PEX_IF_REGS_BASE(if)) + 0x1A10)
+#define PEX_PWR_MNG_EXT_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x1A18)
+#define PEX_FLOW_CTRL_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x1A20)
+#define PEX_DYNMC_WIDTH_MNG_REG(if)	((MV_PEX_IF_REGS_BASE(if)) + 0x1A30)
+#define PEX_ROOT_CMPLX_SSPL_REG(if)	((MV_PEX_IF_REGS_BASE(if)) + 0x1A0C)
+#define PEX_RAM_PARITY_CTRL_REG(if)	((MV_PEX_IF_REGS_BASE(if)) + 0x1A50)
+#define PEX_DBG_CTRL_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x1A60)
+#define PEX_DBG_STATUS_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x1A64)
+
+#define PXLCSR_NEG_LNK_GEN_OFFS		16	/* Negotiated Link GEN */
+#define PXLCSR_NEG_LNK_GEN_MASK		(0xf << PXLCSR_NEG_LNK_GEN_OFFS)
+#define PXLCSR_NEG_LNK_GEN_1_1		(0x1 << PXLCSR_NEG_LNK_GEN_OFFS)
+#define PXLCSR_NEG_LNK_GEN_2_0		(0x2 << PXLCSR_NEG_LNK_GEN_OFFS)
+
+#define PEX_CFG_ADDR_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x18F8)
+#define PEX_CFG_DATA_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x18FC)
+#define PEX_CAUSE_REG(if)		((MV_PEX_IF_REGS_BASE(if)) + 0x1900)
+
+#define PEX_CAPABILITY_REG		0x60
+#define PEX_DEV_CAPABILITY_REG		0x64
+#define PEX_DEV_CTRL_STAT_REG		0x68
+#define PEX_LINK_CAPABILITY_REG		0x6C
+#define PEX_LINK_CTRL_STAT_REG		0x70
+#define PEX_LINK_CTRL_STAT_2_REG	0x90
+
+#endif /* __BOARD_ENV_SPEC */
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c
new file mode 100644
index 000000000..ea3b4c7d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c
@@ -0,0 +1,1611 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/delay.h>
+
+#include "high_speed_env_spec.h"
+#include "board_env_spec.h"
+
+#define	SERDES_VERSION	"2.1.5"
+#define ENDED_OK	"High speed PHY - Ended Successfully\n"
+
+static const u8 serdes_cfg[][SERDES_LAST_UNIT] = BIN_SERDES_CFG;
+
+extern MV_BIN_SERDES_CFG *serdes_info_tbl[];
+
+extern u8 rd78460gp_twsi_dev[];
+extern u8 db88f78xx0rev2_twsi_dev[];
+
+u32 pex_cfg_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 offs);
+int pex_local_bus_num_set(u32 pex_if, u32 bus_num);
+int pex_local_dev_num_set(u32 pex_if, u32 dev_num);
+
+#define MV_BOARD_PEX_MODULE_ADDR		0x23
+#define MV_BOARD_PEX_MODULE_ID			1
+#define MV_BOARD_ETM_MODULE_ID			2
+
+#define	PEX_MODULE_DETECT		1
+#define	ETM_MODULE_DETECT               2
+
+#define PEX_MODE_GET(satr)		((satr & 0x6) >> 1)
+#define PEX_CAPABILITY_GET(satr, port)	((satr >> port) & 1)
+#define MV_PEX_UNIT_TO_IF(pex_unit)	((pex_unit < 3) ? (pex_unit * 4) : 9)
+
+/* Static parametes */
+static int config_module;
+static int switch_module;
+
+/* Local function */
+static u32 board_id_get(void)
+{
+#if defined(CONFIG_DB_88F78X60)
+	return DB_88F78XX0_BP_ID;
+#elif defined(CONFIG_RD_88F78460_SERVER)
+	return RD_78460_SERVER_ID;
+#elif defined(CONFIG_RD_78460_SERVER_REV2)
+	return RD_78460_SERVER_REV2_ID;
+#elif defined(CONFIG_DB_78X60_PCAC)
+	return DB_78X60_PCAC_ID;
+#elif defined(CONFIG_DB_88F78X60_REV2)
+	return DB_88F78XX0_BP_REV2_ID;
+#elif defined(CONFIG_RD_78460_NAS)
+	return RD_78460_NAS_ID;
+#elif defined(CONFIG_DB_78X60_AMC)
+	return DB_78X60_AMC_ID;
+#elif defined(CONFIG_DB_78X60_PCAC_REV2)
+	return DB_78X60_PCAC_REV2_ID;
+#elif defined(CONFIG_DB_784MP_GP)
+	return DB_784MP_GP_ID;
+#elif defined(CONFIG_RD_78460_CUSTOMER)
+	return RD_78460_CUSTOMER_ID;
+#else
+	/*
+	 * Return 0 here for custom board as this should not be used
+	 * for custom boards.
+	 */
+	return 0;
+#endif
+}
+
+__weak u8 board_sat_r_get(u8 dev_num, u8 reg)
+{
+	u8 data;
+	u8 *dev;
+	u32 board_id = board_id_get();
+	int ret;
+
+	switch (board_id) {
+	case DB_78X60_AMC_ID:
+	case DB_78X60_PCAC_REV2_ID:
+	case RD_78460_CUSTOMER_ID:
+	case RD_78460_SERVER_ID:
+	case RD_78460_SERVER_REV2_ID:
+	case DB_78X60_PCAC_ID:
+		return (0x1 << 1) | 1;
+	case FPGA_88F78XX0_ID:
+	case RD_78460_NAS_ID:
+		return (0x0 << 1) | 1;
+	case DB_784MP_GP_ID:
+		dev = rd78460gp_twsi_dev;
+
+		break;
+	case DB_88F78XX0_BP_ID:
+	case DB_88F78XX0_BP_REV2_ID:
+		dev = db88f78xx0rev2_twsi_dev;
+		break;
+
+	default:
+		return 0;
+	}
+
+	/* Read MPP module ID */
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	ret = i2c_read(dev[dev_num], 0, 1, (u8 *)&data, 1);
+	if (ret)
+		return MV_ERROR;
+
+	return data;
+}
+
+static int board_modules_scan(void)
+{
+	u8 val;
+	u32 board_id = board_id_get();
+	int ret;
+
+	/* Perform scan only for DB board */
+	if ((board_id == DB_88F78XX0_BP_ID) ||
+	    (board_id == DB_88F78XX0_BP_REV2_ID)) {
+		/* reset modules flags */
+		config_module = 0;
+
+		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+		/* SERDES module (only PEX model is supported now) */
+		ret = i2c_read(MV_BOARD_PEX_MODULE_ADDR, 0, 1, (u8 *)&val, 1);
+		if (ret)
+			return MV_ERROR;
+
+		if (val == MV_BOARD_PEX_MODULE_ID)
+			config_module = PEX_MODULE_DETECT;
+		if (val == MV_BOARD_ETM_MODULE_ID)
+			config_module = ETM_MODULE_DETECT;
+	} else if (board_id == RD_78460_NAS_ID) {
+		switch_module = 0;
+		if ((reg_read(GPP_DATA_IN_REG(2)) & MV_GPP66) == 0x0)
+			switch_module = 1;
+	}
+
+	return MV_OK;
+}
+
+u32 pex_max_unit_get(void)
+{
+	/*
+	 * TODO:
+	 * Right now only MV78460 is supported. Other SoC's might need
+	 * a different value here.
+	 */
+	return MV_PEX_MAX_UNIT;
+}
+
+u32 pex_max_if_get(void)
+{
+	/*
+	 * TODO:
+	 * Right now only MV78460 is supported. Other SoC's might need
+	 * a different value here.
+	 */
+	return MV_PEX_MAX_IF;
+}
+
+u8 board_cpu_freq_get(void)
+{
+	u32 sar;
+	u32 sar_msb;
+
+	sar = reg_read(MPP_SAMPLE_AT_RESET(0));
+	sar_msb = reg_read(MPP_SAMPLE_AT_RESET(1));
+	return ((sar_msb & 0x100000) >> 17) | ((sar & 0xe00000) >> 21);
+}
+
+__weak MV_BIN_SERDES_CFG *board_serdes_cfg_get(void)
+{
+	u32 board_id;
+	u32 serdes_cfg_val = 0;	/* default */
+
+	board_id = board_id_get();
+
+	switch (board_id) {
+	case DB_784MP_GP_ID:
+		serdes_cfg_val = 0;
+		break;
+	}
+
+	return &serdes_info_tbl[board_id - BOARD_ID_BASE][serdes_cfg_val];
+}
+
+u16 ctrl_model_get(void)
+{
+	/*
+	 * SoC version can't be autodetected. So we need to rely on a define
+	 * from the config system here.
+	 */
+#if defined(CONFIG_MV78230)
+	return MV_78230_DEV_ID;
+#elif defined(CONFIG_MV78260)
+	return MV_78260_DEV_ID;
+#else
+	return MV_78460_DEV_ID;
+#endif
+}
+
+u32 get_line_cfg(u32 line_num, MV_BIN_SERDES_CFG *info)
+{
+	if (line_num < 8)
+		return (info->line0_7 >> (line_num << 2)) & 0xF;
+	else
+		return (info->line8_15 >> ((line_num - 8) << 2)) & 0xF;
+}
+
+static int serdes_max_lines_get(void)
+{
+	switch (ctrl_model_get()) {
+	case MV_78230_DEV_ID:
+		return 7;
+	case MV_78260_DEV_ID:
+		return 12;
+	case MV_78460_DEV_ID:
+		return 16;
+	}
+
+	return 0;
+}
+
+/*
+ * Tests have shown that on some boards the default width of the
+ * configuration pulse for the PEX link detection might lead to
+ * non-established PCIe links (link down). Especially under certain
+ * conditions (higher temperature) and with specific PCIe devices.
+ * To enable a board-specific detection pulse width this weak
+ * array "serdes_pex_pulse_width[4]" is introduced which can be
+ * overwritten if needed by a board-specific version. If the board
+ * code does not provide a non-weak version of this variable, the
+ * default value will be used. So nothing is changed from the
+ * current setup on the supported board.
+ */
+__weak u8 serdes_pex_pulse_width[4] = { 2, 2, 2, 2 };
+
+int serdes_phy_config(void)
+{
+	int status = MV_OK;
+	u32 line_cfg;
+	u8 line_num;
+	/* addr/value for each line @ every setup step */
+	u32 addr[16][11], val[16][11];
+	u8 pex_unit, pex_line_num;
+	u8 sgmii_port = 0;
+	u32 tmp;
+	u32 in_direct;
+	u8 max_serdes_lines;
+	MV_BIN_SERDES_CFG *info;
+	u8 satr11;
+	u8 sata_port;
+	u8 freq;
+	u8 device_rev;
+	u32 rx_high_imp_mode;
+	u16 ctrl_mode;
+	u32 pex_if;
+	u32 pex_if_num;
+
+	/*
+	 * Get max. serdes lines count
+	 */
+	max_serdes_lines = serdes_max_lines_get();
+	if (max_serdes_lines == 0)
+		return MV_OK;
+
+	satr11 = board_sat_r_get(1, 1);
+	if ((u8) MV_ERROR == (u8) satr11)
+		return MV_ERROR;
+
+	board_modules_scan();
+	memset(addr, 0, sizeof(addr));
+	memset(val, 0, sizeof(val));
+
+	/* Check if DRAM is already initialized  */
+	if (reg_read(REG_BOOTROM_ROUTINE_ADDR) &
+	    (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)) {
+		DEBUG_INIT_S("High speed PHY - Version: ");
+		DEBUG_INIT_S(SERDES_VERSION);
+		DEBUG_INIT_S(" - 2nd boot - Skip\n");
+		return MV_OK;
+	}
+	DEBUG_INIT_S("High speed PHY - Version: ");
+	DEBUG_INIT_S(SERDES_VERSION);
+	DEBUG_INIT_S(" (COM-PHY-V20)\n");
+
+	/*
+	 * AVS :  disable AVS for frequency less than 1333
+	 */
+	freq = board_cpu_freq_get();
+	device_rev = mv_ctrl_rev_get();
+
+	if (device_rev == 2) {	/*   for B0 only */
+		u32 cpu_avs;
+		u8 fabric_freq;
+		cpu_avs = reg_read(CPU_AVS_CONTROL2_REG);
+		DEBUG_RD_REG(CPU_AVS_CONTROL2_REG, cpu_avs);
+		cpu_avs &= ~(1 << 9);
+
+		if ((0x4 == freq) || (0xB == freq)) {
+			u32 tmp2;
+
+			tmp2 = reg_read(CPU_AVS_CONTROL0_REG);
+			DEBUG_RD_REG(CPU_AVS_CONTROL0_REG, tmp2);
+			/* cpu upper limit = 1.1V  cpu lower limit = 0.9125V  */
+			tmp2 |= 0x0FF;
+			reg_write(CPU_AVS_CONTROL0_REG, tmp2);
+			DEBUG_WR_REG(CPU_AVS_CONTROL0_REG, tmp2);
+			cpu_avs |= (1 << 9);	/* cpu avs enable */
+			cpu_avs |= (1 << 18);	/* AvsAvddDetEn enable  */
+			fabric_freq = (reg_read(MPP_SAMPLE_AT_RESET(0)) &
+				       SAR0_FABRIC_FREQ_MASK) >> SAR0_FABRIC_FREQ_OFFSET;
+			if ((0xB == freq) && (5 == fabric_freq)) {
+				u32 core_avs;
+
+				core_avs = reg_read(CORE_AVS_CONTROL_0REG);
+				DEBUG_RD_REG(CORE_AVS_CONTROL_0REG, core_avs);
+
+				/*
+				 * Set core lower limit = 0.9V &
+				 * core upper limit = 0.9125V
+				 */
+				core_avs &= ~(0xff);
+				core_avs |= 0x0E;
+				reg_write(CORE_AVS_CONTROL_0REG, core_avs);
+				DEBUG_WR_REG(CORE_AVS_CONTROL_0REG, core_avs);
+
+				core_avs = reg_read(CORE_AVS_CONTROL_2REG);
+				DEBUG_RD_REG(CORE_AVS_CONTROL_2REG, core_avs);
+				core_avs |= (1 << 9);	/*  core AVS enable  */
+				reg_write(CORE_AVS_CONTROL_2REG, core_avs);
+				DEBUG_WR_REG(CORE_AVS_CONTROL_2REG, core_avs);
+
+				tmp2 = reg_read(GENERAL_PURPOSE_RESERVED0_REG);
+				DEBUG_RD_REG(GENERAL_PURPOSE_RESERVED0_REG,
+					     tmp2);
+				tmp2 |= 0x1;	/*  AvsCoreAvddDetEn enable   */
+				reg_write(GENERAL_PURPOSE_RESERVED0_REG, tmp2);
+				DEBUG_WR_REG(GENERAL_PURPOSE_RESERVED0_REG,
+					     tmp2);
+			}
+		}
+		reg_write(CPU_AVS_CONTROL2_REG, cpu_avs);
+		DEBUG_WR_REG(CPU_AVS_CONTROL2_REG, cpu_avs);
+	}
+
+	info = board_serdes_cfg_get();
+
+	if (info == NULL) {
+		DEBUG_INIT_S("Hight speed PHY Error #1\n");
+		return MV_ERROR;
+	}
+	DEBUG_INIT_FULL_S("info->line0_7= 0x");
+	DEBUG_INIT_FULL_D(info->line0_7, 8);
+	DEBUG_INIT_FULL_S("   info->line8_15= 0x");
+	DEBUG_INIT_FULL_D(info->line8_15, 8);
+	DEBUG_INIT_FULL_S("\n");
+
+	if (config_module & ETM_MODULE_DETECT) {	/* step 0.9 ETM */
+		DEBUG_INIT_FULL_S("ETM module detect Step 0.9:\n");
+		reg_write(SERDES_LINE_MUX_REG_0_7, 0x11111111);
+		DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, 0x11111111);
+		info->pex_mode[1] = PEX_BUS_DISABLED;	/* pex unit 1 is configure for ETM */
+		mdelay(100);
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x002 << 16) | 0xf44d);	/* SETM0 - start calibration         */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x002 << 16) | 0xf44d);	/* SETM0 - start calibration         */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x302 << 16) | 0xf44d);	/* SETM1 - start calibration         */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x302 << 16) | 0xf44d);	/* SETM1 - start calibration         */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x001 << 16) | 0xf801);	/* SETM0 - SATA mode & 25MHz ref clk */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x001 << 16) | 0xf801);	/* SETM0 - SATA mode & 25MHz ref clk */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x301 << 16) | 0xf801);	/* SETM1 - SATA mode & 25MHz ref clk */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x301 << 16) | 0xf801);	/* SETM1 - SATA mode & 25MHz ref clk */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x011 << 16) | 0x0BFF);	/* SETM0 - G3 full swing AMP         */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x011 << 16) | 0x0BFF);	/* SETM0 - G3 full swing AMP         */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x311 << 16) | 0x0BFF);	/* SETM1 - G3 full swing AMP         */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x311 << 16) | 0x0BFF);	/* SETM1 - G3 full swing AMP         */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x023 << 16) | 0x0800);	/* SETM0 - 40 data bit width         */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x023 << 16) | 0x0800);	/* SETM0 - 40 data bit width         */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x323 << 16) | 0x0800);	/* SETM1 - 40 data bit width         */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x323 << 16) | 0x0800);	/* SETM1 - 40 data bit width         */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x046 << 16) | 0x0400);	/* lane0(serdes4)                    */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x046 << 16) | 0x0400);	/* lane0(serdes4)                    */
+		reg_write(PEX_PHY_ACCESS_REG(1), (0x346 << 16) | 0x0400);	/* lane3(serdes7)                    */
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x346 << 16) | 0x0400);	/* lane3(serdes7)                    */
+	}
+
+	/* STEP -1 [PEX-Only] First phase of PEX-PIPE Configuration: */
+	DEBUG_INIT_FULL_S("Step 1: First phase of PEX-PIPE Configuration\n");
+	for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
+		if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+			continue;
+
+		/* 1.   GLOB_CLK_CTRL Reset and Clock Control */
+		reg_write(PEX_PHY_ACCESS_REG(pex_unit), (0xC1 << 16) | 0x25);
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), (0xC1 << 16) | 0x25);
+
+		/* 2.   GLOB_TEST_CTRL Test Mode Control */
+		if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) {
+			reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+				  (0xC2 << 16) | 0x200);
+			DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+				     (0xC2 << 16) | 0x200);
+		}
+
+		/* 3.   GLOB_CLK_SRC_LO Clock Source Low */
+		if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) {
+			reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+				  (0xC3 << 16) | 0x0F);
+			DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+				     (0xC3 << 16) | 0x0F);
+		}
+
+		reg_write(PEX_PHY_ACCESS_REG(pex_unit), (0xC5 << 16) | 0x11F);
+		DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+			     (0xC5 << 16) | 0x11F);
+	}
+
+	/*
+	 * 2 Configure the desire PIN_PHY_GEN and do power down to the PU_PLL,
+	 * PU_RX,PU_TX. (bits[12:5])
+	 */
+	DEBUG_INIT_FULL_S("Step 2: Configure the desire PIN_PHY_GEN\n");
+	for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+		line_cfg = get_line_cfg(line_num, info);
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+			continue;
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX])
+			continue;
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
+			switch (line_num) {
+			case 4:
+			case 6:
+				sata_port = 0;
+				break;
+			case 5:
+				sata_port = 1;
+				break;
+			default:
+				DEBUG_INIT_C
+				    ("SATA port error for serdes line: ",
+				     line_num, 2);
+				return MV_ERROR;
+			}
+			tmp = reg_read(SATA_LP_PHY_EXT_CTRL_REG(sata_port));
+			DEBUG_RD_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+			tmp &= ~((0x1ff << 5) | 0x7);
+			tmp |= ((info->bus_speed & (1 << line_num)) != 0) ?
+				(0x11 << 5) : 0x0;
+
+			reg_write(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+			DEBUG_WR_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+		}
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+			/*
+			 * 4) Configure the desire PIN_PHY_GEN and do power
+			 * down to the PU_PLL,PU_RX,PU_TX. (bits[12:5])
+			 */
+			tmp = reg_read(SGMII_SERDES_CFG_REG(0));
+			DEBUG_RD_REG(SGMII_SERDES_CFG_REG(0), tmp);
+			tmp &= ~((0x1ff << 5) | 0x7);
+			tmp |= 0x660;
+			reg_write(SGMII_SERDES_CFG_REG(0), tmp);
+			DEBUG_WR_REG(SGMII_SERDES_CFG_REG(0), tmp);
+			continue;
+		}
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
+			sgmii_port = 0;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
+			sgmii_port = 1;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
+			sgmii_port = 2;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
+			sgmii_port = 3;
+		else
+			continue;
+
+		tmp = reg_read(SGMII_SERDES_CFG_REG(sgmii_port));
+		DEBUG_RD_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+		tmp &= ~((0x1ff << 5) | 0x7);
+		tmp |= (((info->bus_speed & (1 << line_num)) != 0) ?
+			(0x88 << 5) : (0x66 << 5));
+		reg_write(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+		DEBUG_WR_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+	}
+
+	/* Step 3 - QSGMII enable */
+	DEBUG_INIT_FULL_S("Step 3 QSGMII enable\n");
+	for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+		line_cfg = get_line_cfg(line_num, info);
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+			/* QSGMII Active bit set to true */
+			tmp = reg_read(QSGMII_CONTROL_1_REG);
+			DEBUG_RD_REG(QSGMII_CONTROL_1_REG, tmp);
+			tmp |= (1 << 30);
+#ifdef ERRATA_GL_6572255
+			tmp |= (1 << 27);
+#endif
+			reg_write(QSGMII_CONTROL_1_REG, tmp);
+			DEBUG_WR_REG(QSGMII_CONTROL_1_REG, tmp);
+		}
+	}
+
+	/* Step 4 - configure SERDES MUXes */
+	DEBUG_INIT_FULL_S("Step 4: Configure SERDES MUXes\n");
+	if (config_module & ETM_MODULE_DETECT) {
+		reg_write(SERDES_LINE_MUX_REG_0_7, 0x40041111);
+		DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, 0x40041111);
+	} else {
+		reg_write(SERDES_LINE_MUX_REG_0_7, info->line0_7);
+		DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, info->line0_7);
+	}
+	reg_write(SERDES_LINE_MUX_REG_8_15, info->line8_15);
+	DEBUG_WR_REG(SERDES_LINE_MUX_REG_8_15, info->line8_15);
+
+	/* Step 5: Activate the RX High Impedance Mode  */
+	DEBUG_INIT_FULL_S("Step 5: Activate the RX High Impedance Mode\n");
+	rx_high_imp_mode = 0x8080;
+	if (device_rev == 2)	/*   for B0 only */
+		rx_high_imp_mode |= 4;
+
+	for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+		/* for each serdes lane */
+		DEBUG_INIT_FULL_S("SERDES  ");
+		DEBUG_INIT_FULL_D_10(line_num, 2);
+		line_cfg = get_line_cfg(line_num, info);
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) {
+			DEBUG_INIT_FULL_S(" unconnected ***\n");
+			continue;
+		}
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
+			pex_unit = line_num >> 2;
+			pex_line_num = line_num % 4;
+			DEBUG_INIT_FULL_S(" - PEX unit ");
+			DEBUG_INIT_FULL_D_10(pex_unit, 1);
+			DEBUG_INIT_FULL_S(" line=  ");
+			DEBUG_INIT_FULL_D_10(pex_line_num, 1);
+			DEBUG_INIT_FULL_S("\n");
+
+			/* Needed for PEX_PHY_ACCESS_REG macro */
+			if ((line_num > 7) &&
+			    (info->pex_mode[3] == PEX_BUS_MODE_X8))
+				/* lines 8 - 15 are belong to PEX3 in x8 mode */
+				pex_unit = 3;
+
+			if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+				continue;
+
+			/*
+			 * 8)  Activate the RX High Impedance Mode field
+			 * (bit [2]) in register /PCIe_USB Control (Each MAC
+			 * contain different Access to reach its
+			 * Serdes-Regfile).
+			 * [PEX-Only] Set bit[12]: The analog part latches idle
+			 * if PU_TX = 1 and PU_PLL =1.
+			 */
+
+			/* Termination enable */
+			if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) {
+				in_direct = (0x48 << 16) | (pex_line_num << 24) |
+					0x1000 | rx_high_imp_mode;	/* x1 */
+			} else if ((info->pex_mode[pex_unit] ==
+				    PEX_BUS_MODE_X4) && (pex_line_num == 0))
+				in_direct = (0x48 << 16) | (pex_line_num << 24) |
+					0x1000 | (rx_high_imp_mode & 0xff);	/* x4 */
+			else
+				in_direct = 0;
+
+			if (in_direct) {
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+					  in_direct);
+				DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+					     in_direct);
+			}
+
+			continue;
+		}
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
+			/*
+			 * port 0 for serdes lines 4,6,  and port 1 for
+			 * serdes lines 5
+			 */
+			sata_port = line_num & 1;
+			DEBUG_INIT_FULL_S(" - SATA port  ");
+			DEBUG_INIT_FULL_D_10(sata_port, 2);
+			DEBUG_INIT_FULL_S("\n");
+			reg_write(SATA_COMPHY_CTRL_REG(sata_port),
+				  rx_high_imp_mode);
+			DEBUG_WR_REG(SATA_COMPHY_CTRL_REG(sata_port),
+				     rx_high_imp_mode);
+			continue;
+		}
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+			DEBUG_INIT_FULL_S(" - QSGMII\n");
+			reg_write(SGMII_COMPHY_CTRL_REG(0), rx_high_imp_mode);
+			DEBUG_WR_REG(SGMII_COMPHY_CTRL_REG(0),
+				     rx_high_imp_mode);
+			continue;
+		}
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
+			sgmii_port = 0;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
+			sgmii_port = 1;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
+			sgmii_port = 2;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
+			sgmii_port = 3;
+		else
+			continue;
+		DEBUG_INIT_FULL_S(" - SGMII port  ");
+		DEBUG_INIT_FULL_D_10(sgmii_port, 2);
+		DEBUG_INIT_FULL_S("\n");
+		reg_write(SGMII_COMPHY_CTRL_REG(sgmii_port), rx_high_imp_mode);
+		DEBUG_WR_REG(SGMII_COMPHY_CTRL_REG(sgmii_port),
+			     rx_high_imp_mode);
+	}			/* for each serdes lane */
+
+	/* Step 6 [PEX-Only] PEX-Main configuration (X4 or X1): */
+	DEBUG_INIT_FULL_S("Step 6: [PEX-Only] PEX-Main configuration (X4 or X1)\n");
+	tmp = reg_read(SOC_CTRL_REG);
+	DEBUG_RD_REG(SOC_CTRL_REG, tmp);
+	tmp &= 0x200;
+	if (info->pex_mode[0] == PEX_BUS_MODE_X1)
+		tmp |= PCIE0_QUADX1_EN;
+	if (info->pex_mode[1] == PEX_BUS_MODE_X1)
+		tmp |= PCIE1_QUADX1_EN;
+	if (((reg_read(MPP_SAMPLE_AT_RESET(0)) & PEX_CLK_100MHZ_MASK) >>
+	     PEX_CLK_100MHZ_OFFSET) == 0x1)
+		tmp |= (PCIE0_CLK_OUT_EN_MASK | PCIE1_CLK_OUT_EN_MASK);
+
+	reg_write(SOC_CTRL_REG, tmp);
+	DEBUG_WR_REG(SOC_CTRL_REG, tmp);
+
+	/* 6.2 PCI Express Link Capabilities */
+	DEBUG_INIT_FULL_S("Step 6.2: [PEX-Only] PCI Express Link Capabilities\n");
+
+	for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+		line_cfg = get_line_cfg(line_num, info);
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
+			/*
+			 * PCI Express Control
+			 * 0xX1A00 [0]:
+			 * 0x0 X4-Link.
+			 * 0x1 X1-Link
+			 */
+			pex_unit = line_num >> 2;
+			pex_if = MV_SERDES_NUM_TO_PEX_NUM(line_num);
+			if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+				continue;
+
+			/*  set Common Clock Configuration */
+			tmp = reg_read(PEX_LINK_CTRL_STATUS_REG(pex_if));
+			DEBUG_RD_REG(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
+			tmp |= (1 << 6);
+			reg_write(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
+			DEBUG_WR_REG(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
+
+			tmp = reg_read(PEX_LINK_CAPABILITIES_REG(pex_if));
+			DEBUG_RD_REG(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
+			tmp &= ~(0x3FF);
+			if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1)
+				tmp |= (0x1 << 4);
+			if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)
+				tmp |= (0x4 << 4);
+			if (0 == PEX_CAPABILITY_GET(satr11, pex_unit))
+				tmp |= 0x1;
+			else
+				tmp |= 0x2;
+			DEBUG_INIT_FULL_S("Step 6.2: PEX ");
+			DEBUG_INIT_FULL_D(pex_if, 1);
+			DEBUG_INIT_FULL_C(" set GEN", (tmp & 3), 1);
+			reg_write(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
+			DEBUG_WR_REG(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
+
+			/*
+			 * If pex is X4, no need to pass thru the other
+			 * 3X1 serdes lines
+			 */
+			if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)
+				line_num += 3;
+		}
+	}
+
+	/*
+	 * Step 7 [PEX-X4 Only] To create PEX-Link that contain 4-lanes you
+	 * need to config the register SOC_Misc/General Purpose2
+	 * (Address= 182F8)
+	 */
+	DEBUG_INIT_FULL_S("Step 7: [PEX-X4 Only] To create PEX-Link\n");
+	tmp = reg_read(GEN_PURP_RES_2_REG);
+	DEBUG_RD_REG(GEN_PURP_RES_2_REG, tmp);
+
+	tmp &= 0xFFFF0000;
+	if (info->pex_mode[0] == PEX_BUS_MODE_X4)
+		tmp |= 0x0000000F;
+
+	if (info->pex_mode[1] == PEX_BUS_MODE_X4)
+		tmp |= 0x000000F0;
+
+	if (info->pex_mode[2] == PEX_BUS_MODE_X4)
+		tmp |= 0x00000F00;
+
+	if (info->pex_mode[3] == PEX_BUS_MODE_X4)
+		tmp |= 0x0000F000;
+
+	reg_write(GEN_PURP_RES_2_REG, tmp);
+	DEBUG_WR_REG(GEN_PURP_RES_2_REG, tmp);
+
+	/* Steps  8 , 9 ,10 - use prepared REG addresses and values */
+	DEBUG_INIT_FULL_S("Steps 7,8,9,10 and 11\n");
+
+	/* Prepare PHY parameters for each step according to  MUX selection */
+	for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+		/* for each serdes lane */
+
+		line_cfg = get_line_cfg(line_num, info);
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+			continue;
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
+			pex_unit = line_num >> 2;
+			pex_line_num = line_num % 4;
+
+			if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+				continue;
+			/*
+			 * 8)   Configure the desire PHY_MODE (bits [7:5])
+			 * and REF_FREF_SEL (bits[4:0]) in the register Power
+			 * and PLL Control (Each MAC contain different Access
+			 * to reach its Serdes-Regfile).
+			 */
+			if (((info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) &&
+			     (0 == pex_line_num))
+			    || ((info->pex_mode[pex_unit] == PEX_BUS_MODE_X1))) {
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+					  (0x01 << 16) | (pex_line_num << 24) |
+					  0xFC60);
+				DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+					     (0x01 << 16) | (pex_line_num << 24)
+					     | 0xFC60);
+				/*
+				 * Step 8.1: [PEX-Only] Configure Max PLL Rate
+				 * (bit 8 in  KVCO Calibration Control and
+				 * bits[10:9] in
+				 */
+				/* Use Maximum PLL Rate(Bit 8) */
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+					  (0x02 << 16) | (1 << 31) |
+					  (pex_line_num << 24)); /* read command */
+				DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+					     (0x02 << 16) | (1 << 31) |
+					     (pex_line_num << 24));
+				tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit));
+				DEBUG_RD_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+				tmp &= ~(1 << 31);
+				tmp |= (1 << 8);
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+				DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+
+				/* Use Maximum PLL Rate(Bits [10:9]) */
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+					  (0x81 << 16) | (1 << 31) |
+					  (pex_line_num << 24)); /* read command */
+				DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+					     (0x81 << 16) | (1 << 31) |
+					     (pex_line_num << 24));
+				tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit));
+				DEBUG_RD_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+				tmp &= ~(1 << 31);
+				tmp |= (3 << 9);
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+				DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+			}
+
+			continue;
+		}
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
+			/*
+			 * Port 0 for serdes lines 4,6,  and port 1 for serdes
+			 * lines 5
+			 */
+			sata_port = line_num & 1;
+
+			/*
+			 * 8) Configure the desire PHY_MODE (bits [7:5]) and
+			 * REF_FREF_SEL (bits[4:0]) in the register Power
+			 * and PLL Control (Each MAC contain different Access
+			 * to reach its Serdes-Regfile).
+			 */
+			reg_write(SATA_PWR_PLL_CTRL_REG(sata_port), 0xF801);
+			DEBUG_WR_REG(SATA_PWR_PLL_CTRL_REG(sata_port), 0xF801);
+
+			/*  9)  Configure the desire SEL_BITS  */
+			reg_write(SATA_DIG_LP_ENA_REG(sata_port), 0x400);
+			DEBUG_WR_REG(SATA_DIG_LP_ENA_REG(sata_port), 0x400);
+
+			/* 10)  Configure the desire REFCLK_SEL */
+
+			reg_write(SATA_REF_CLK_SEL_REG(sata_port), 0x400);
+			DEBUG_WR_REG(SATA_REF_CLK_SEL_REG(sata_port), 0x400);
+
+			/* 11)  Power up to the PU_PLL,PU_RX,PU_TX.   */
+			tmp = reg_read(SATA_LP_PHY_EXT_CTRL_REG(sata_port));
+			DEBUG_RD_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+			tmp |= 7;
+			reg_write(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+			DEBUG_WR_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+
+			continue;
+		}
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+			/*
+			 * 8)   Configure the desire PHY_MODE (bits [7:5])
+			 * and REF_FREF_SEL (bits[4:0]) in the register
+			 */
+			reg_write(SGMII_PWR_PLL_CTRL_REG(0), 0xF881);
+			DEBUG_WR_REG(SGMII_PWR_PLL_CTRL_REG(0), 0xF881);
+
+			/*
+			 * 9)   Configure the desire SEL_BITS (bits [11:0]
+			 * in register
+			 */
+			reg_write(SGMII_DIG_LP_ENA_REG(0), 0x400);
+			DEBUG_WR_REG(SGMII_DIG_LP_ENA_REG(0), 0x400);
+
+			/*
+			 * 10)  Configure the desire REFCLK_SEL (bit [10])
+			 * in register
+			 */
+			reg_write(SGMII_REF_CLK_SEL_REG(0), 0x400);
+			DEBUG_WR_REG(SGMII_REF_CLK_SEL_REG(0), 0x400);
+
+			/* 11)  Power up to the PU_PLL,PU_RX,PU_TX.  */
+			tmp = reg_read(SGMII_SERDES_CFG_REG(0));
+			DEBUG_RD_REG(SGMII_SERDES_CFG_REG(0), tmp);
+			tmp |= 7;
+			reg_write(SGMII_SERDES_CFG_REG(0), tmp);
+			DEBUG_WR_REG(SGMII_SERDES_CFG_REG(0), tmp);
+			continue;
+		}
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
+			sgmii_port = 0;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
+			sgmii_port = 1;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
+			sgmii_port = 2;
+		else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
+			sgmii_port = 3;
+		else
+			continue;
+
+		/*
+		 * 8)   Configure the desire PHY_MODE (bits [7:5]) and
+		 * REF_FREF_SEL (bits[4:0]) in the register
+		 */
+		reg_write(SGMII_PWR_PLL_CTRL_REG(sgmii_port), 0xF881);
+		DEBUG_WR_REG(SGMII_PWR_PLL_CTRL_REG(sgmii_port), 0xF881);
+
+		/* 9)   Configure the desire SEL_BITS (bits [11:0] in register */
+		reg_write(SGMII_DIG_LP_ENA_REG(sgmii_port), 0);
+		DEBUG_WR_REG(SGMII_DIG_LP_ENA_REG(sgmii_port), 0);
+
+		/* 10)  Configure the desire REFCLK_SEL (bit [10]) in register  */
+		reg_write(SGMII_REF_CLK_SEL_REG(sgmii_port), 0x400);
+		DEBUG_WR_REG(SGMII_REF_CLK_SEL_REG(sgmii_port), 0x400);
+
+		/* 11)  Power up to the PU_PLL,PU_RX,PU_TX.  */
+		tmp = reg_read(SGMII_SERDES_CFG_REG(sgmii_port));
+		DEBUG_RD_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+		tmp |= 7;
+		reg_write(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+		DEBUG_WR_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+
+	}			/* for each serdes lane */
+
+	/* Step 12 [PEX-Only] Last phase of PEX-PIPE Configuration */
+	DEBUG_INIT_FULL_S("Steps 12: [PEX-Only] Last phase of PEX-PIPE Configuration\n");
+	for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+		/* for each serdes lane */
+
+		line_cfg = get_line_cfg(line_num, info);
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+			continue;
+
+		if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
+			pex_unit = line_num >> 2;
+			pex_line_num = line_num % 4;
+			if (0 == pex_line_num) {
+				/*
+				 * Configure the detection pulse with before
+				 * the reset is deasserted
+				 */
+
+				/* Read the old value (indirect access) */
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+					  (0x48 << 16) | (1 << 31) |
+					  (pex_line_num << 24));
+				tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit));
+				tmp &= ~(1 << 31);	/* Clear read */
+				tmp &= ~(3 << 6);	/* Mask width */
+				/* Insert new detection pulse width */
+				tmp |= serdes_pex_pulse_width[pex_unit] << 6;
+				/* Write value back */
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+
+				reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+					  (0xC1 << 16) | 0x24);
+				DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+					     (0xC1 << 16) | 0x24);
+			}
+		}
+	}
+
+	/*--------------------------------------------------------------*/
+	/* Step 13: Wait 15ms before checking results */
+	DEBUG_INIT_FULL_S("Steps 13: Wait 15ms before checking results");
+	mdelay(15);
+	tmp = 20;
+	while (tmp) {
+		status = MV_OK;
+		for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+			u32 tmp;
+			line_cfg = get_line_cfg(line_num, info);
+			if (line_cfg ==
+			    serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+				continue;
+
+			if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX])
+				continue;
+
+			if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
+				/*
+				 * Port 0 for serdes lines 4,6,  and port 1
+				 * for serdes lines 5
+				 */
+				sata_port = line_num & 1;
+
+				tmp =
+				    reg_read(SATA_LP_PHY_EXT_STAT_REG
+					     (sata_port));
+				DEBUG_RD_REG(SATA_LP_PHY_EXT_STAT_REG
+					     (sata_port), tmp);
+				if ((tmp & 0x7) != 0x7)
+					status = MV_ERROR;
+				continue;
+			}
+
+			if (line_cfg ==
+			    serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+				tmp = reg_read(SGMII_SERDES_STAT_REG(0));
+				DEBUG_RD_REG(SGMII_SERDES_STAT_REG(0), tmp);
+				if ((tmp & 0x7) != 0x7)
+					status = MV_ERROR;
+				continue;
+			}
+
+			if (line_cfg ==
+			    serdes_cfg[line_num][SERDES_UNIT_SGMII0])
+				sgmii_port = 0;
+			else if (line_cfg ==
+				 serdes_cfg[line_num][SERDES_UNIT_SGMII1])
+				sgmii_port = 1;
+			else if (line_cfg ==
+				 serdes_cfg[line_num][SERDES_UNIT_SGMII2])
+				sgmii_port = 2;
+			else if (line_cfg ==
+				 serdes_cfg[line_num][SERDES_UNIT_SGMII3])
+				sgmii_port = 3;
+			else
+				continue;
+
+			tmp = reg_read(SGMII_SERDES_STAT_REG(sgmii_port));
+			DEBUG_RD_REG(SGMII_SERDES_STAT_REG(sgmii_port), tmp);
+			if ((tmp & 0x7) != 0x7)
+				status = MV_ERROR;
+		}
+
+		if (status == MV_OK)
+			break;
+		mdelay(5);
+		tmp--;
+	}
+
+	/*
+	 * Step14 [PEX-Only]  In order to configure RC/EP mode please write
+	 * to register 0x0060 bits
+	 */
+	DEBUG_INIT_FULL_S("Steps 14: [PEX-Only]  In order to configure\n");
+	for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
+		if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+			continue;
+		tmp =
+		    reg_read(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)));
+		DEBUG_RD_REG(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
+			     tmp);
+		tmp &= ~(0xf << 20);
+		if (info->pex_type == MV_PEX_ROOT_COMPLEX)
+			tmp |= (0x4 << 20);
+		else
+			tmp |= (0x1 << 20);
+		reg_write(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
+			  tmp);
+		DEBUG_WR_REG(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
+			     tmp);
+	}
+
+	/*
+	 * Step 15 [PEX-Only] Only for EP mode set to Zero bits 19 and 16 of
+	 * register 0x1a60
+	 */
+	DEBUG_INIT_FULL_S("Steps 15: [PEX-Only]  In order to configure\n");
+	for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
+		if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+			continue;
+		if (info->pex_type == MV_PEX_END_POINT) {
+			tmp =
+			    reg_read(PEX_DBG_CTRL_REG
+				     (MV_PEX_UNIT_TO_IF(pex_unit)));
+			DEBUG_RD_REG(PEX_DBG_CTRL_REG
+				     (MV_PEX_UNIT_TO_IF(pex_unit)), tmp);
+			tmp &= 0xfff6ffff;
+			reg_write(PEX_DBG_CTRL_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
+				  tmp);
+			DEBUG_WR_REG(PEX_DBG_CTRL_REG
+				     (MV_PEX_UNIT_TO_IF(pex_unit)), tmp);
+		}
+	}
+
+	if (info->serdes_m_phy_change) {
+		MV_SERDES_CHANGE_M_PHY *serdes_m_phy_change;
+		u32 bus_speed;
+		for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+			line_cfg = get_line_cfg(line_num, info);
+			if (line_cfg ==
+			    serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+				continue;
+			serdes_m_phy_change = info->serdes_m_phy_change;
+			bus_speed = info->bus_speed & (1 << line_num);
+			while (serdes_m_phy_change->type !=
+			       SERDES_UNIT_UNCONNECTED) {
+				switch (serdes_m_phy_change->type) {
+				case SERDES_UNIT_PEX:
+					if (line_cfg != SERDES_UNIT_PEX)
+						break;
+					pex_unit = line_num >> 2;
+					pex_line_num = line_num % 4;
+					if (info->pex_mode[pex_unit] ==
+					    PEX_BUS_DISABLED)
+						break;
+					if ((info->pex_mode[pex_unit] ==
+					     PEX_BUS_MODE_X4) && pex_line_num)
+						break;
+
+					if (bus_speed) {
+						reg_write(PEX_PHY_ACCESS_REG
+							  (pex_unit),
+							  (pex_line_num << 24) |
+							  serdes_m_phy_change->val_hi_speed);
+						DEBUG_WR_REG(PEX_PHY_ACCESS_REG
+							     (pex_unit),
+							     (pex_line_num <<
+							      24) |
+							     serdes_m_phy_change->val_hi_speed);
+					} else {
+						reg_write(PEX_PHY_ACCESS_REG
+							  (pex_unit),
+							  (pex_line_num << 24) |
+							  serdes_m_phy_change->val_low_speed);
+						DEBUG_WR_REG(PEX_PHY_ACCESS_REG
+							     (pex_unit),
+							     (pex_line_num <<
+							      24) |
+							     serdes_m_phy_change->val_low_speed);
+					}
+					break;
+				case SERDES_UNIT_SATA:
+					if (line_cfg != SERDES_UNIT_SATA)
+						break;
+					/*
+					 * Port 0 for serdes lines 4,6,  and
+					 * port 1 for serdes lines 5
+					 */
+					sata_port = line_num & 1;
+					if (bus_speed) {
+						reg_write(SATA_BASE_REG
+							  (sata_port) |
+							  serdes_m_phy_change->reg_hi_speed,
+							  serdes_m_phy_change->val_hi_speed);
+						DEBUG_WR_REG(SATA_BASE_REG
+							     (sata_port) |
+							     serdes_m_phy_change->reg_hi_speed,
+							     serdes_m_phy_change->val_hi_speed);
+					} else {
+						reg_write(SATA_BASE_REG
+							  (sata_port) |
+							  serdes_m_phy_change->reg_low_speed,
+							  serdes_m_phy_change->val_low_speed);
+						DEBUG_WR_REG(SATA_BASE_REG
+							     (sata_port) |
+							     serdes_m_phy_change->reg_low_speed,
+							     serdes_m_phy_change->val_low_speed);
+					}
+					break;
+				case SERDES_UNIT_SGMII0:
+				case SERDES_UNIT_SGMII1:
+				case SERDES_UNIT_SGMII2:
+				case SERDES_UNIT_SGMII3:
+					if (line_cfg == serdes_cfg[line_num]
+					    [SERDES_UNIT_SGMII0])
+						sgmii_port = 0;
+					else if (line_cfg ==
+						 serdes_cfg[line_num]
+						 [SERDES_UNIT_SGMII1])
+						sgmii_port = 1;
+					else if (line_cfg ==
+						 serdes_cfg[line_num]
+						 [SERDES_UNIT_SGMII2])
+						sgmii_port = 2;
+					else if (line_cfg ==
+						 serdes_cfg[line_num]
+						 [SERDES_UNIT_SGMII3])
+						sgmii_port = 3;
+					else
+						break;
+					if (bus_speed) {
+						reg_write(MV_ETH_REGS_BASE
+							  (sgmii_port) |
+							  serdes_m_phy_change->reg_hi_speed,
+							  serdes_m_phy_change->val_hi_speed);
+						DEBUG_WR_REG(MV_ETH_REGS_BASE
+							     (sgmii_port) |
+							     serdes_m_phy_change->reg_hi_speed,
+							     serdes_m_phy_change->val_hi_speed);
+					} else {
+						reg_write(MV_ETH_REGS_BASE
+							  (sgmii_port) |
+							  serdes_m_phy_change->reg_low_speed,
+							  serdes_m_phy_change->val_low_speed);
+						DEBUG_WR_REG(MV_ETH_REGS_BASE
+							     (sgmii_port) |
+							     serdes_m_phy_change->reg_low_speed,
+							     serdes_m_phy_change->val_low_speed);
+					}
+					break;
+				case SERDES_UNIT_QSGMII:
+					if (line_cfg != SERDES_UNIT_QSGMII)
+						break;
+					if (bus_speed) {
+						reg_write
+						    (serdes_m_phy_change->reg_hi_speed,
+						     serdes_m_phy_change->val_hi_speed);
+						DEBUG_WR_REG
+						    (serdes_m_phy_change->reg_hi_speed,
+						     serdes_m_phy_change->val_hi_speed);
+					} else {
+						reg_write
+						    (serdes_m_phy_change->reg_low_speed,
+						     serdes_m_phy_change->val_low_speed);
+						DEBUG_WR_REG
+						    (serdes_m_phy_change->reg_low_speed,
+						     serdes_m_phy_change->val_low_speed);
+					}
+					break;
+				default:
+					break;
+				}
+				serdes_m_phy_change++;
+			}
+		}
+	}
+
+	/* Step 16 [PEX-Only] Training Enable */
+	DEBUG_INIT_FULL_S("Steps 16: [PEX-Only] Training Enable");
+	tmp = reg_read(SOC_CTRL_REG);
+	DEBUG_RD_REG(SOC_CTRL_REG, tmp);
+	tmp &= ~(0x0F);
+	for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
+		reg_write(PEX_CAUSE_REG(pex_unit), 0);
+		DEBUG_WR_REG(PEX_CAUSE_REG(pex_unit), 0);
+		if (info->pex_mode[pex_unit] != PEX_BUS_DISABLED)
+			tmp |= (0x1 << pex_unit);
+	}
+	reg_write(SOC_CTRL_REG, tmp);
+	DEBUG_WR_REG(SOC_CTRL_REG, tmp);
+
+	/* Step 17: Speed change to target speed and width */
+	{
+		u32 tmp_reg, tmp_pex_reg;
+		u32 addr;
+		u32 first_busno, next_busno;
+		u32 max_link_width = 0;
+		u32 neg_link_width = 0;
+		pex_if_num = pex_max_if_get();
+		mdelay(150);
+		DEBUG_INIT_FULL_C("step 17: max_if= 0x", pex_if_num, 1);
+		next_busno = 0;
+		for (pex_if = 0; pex_if < pex_if_num; pex_if++) {
+			line_num = (pex_if <= 8) ? pex_if : 12;
+			line_cfg = get_line_cfg(line_num, info);
+			if (line_cfg != serdes_cfg[line_num][SERDES_UNIT_PEX])
+				continue;
+			pex_unit = (pex_if < 9) ? (pex_if >> 2) : 3;
+			DEBUG_INIT_FULL_S("step 17:  PEX");
+			DEBUG_INIT_FULL_D(pex_if, 1);
+			DEBUG_INIT_FULL_C("  pex_unit= ", pex_unit, 1);
+
+			if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) {
+				DEBUG_INIT_FULL_C("PEX disabled interface ",
+						  pex_if, 1);
+				if (pex_if < 8)
+					pex_if += 3;
+				continue;
+			}
+			first_busno = next_busno;
+			if ((info->pex_type == MV_PEX_END_POINT) &&
+			    (0 == pex_if)) {
+				if ((pex_if < 8) && (info->pex_mode[pex_unit] ==
+						     PEX_BUS_MODE_X4))
+					pex_if += 3;
+				continue;
+			}
+
+			tmp = reg_read(PEX_DBG_STATUS_REG(pex_if));
+			DEBUG_RD_REG(PEX_DBG_STATUS_REG(pex_if), tmp);
+			if ((tmp & 0x7f) == 0x7e) {
+				next_busno++;
+				tmp = reg_read(PEX_LINK_CAPABILITIES_REG(pex_if));
+				max_link_width = tmp;
+				DEBUG_RD_REG((PEX_LINK_CAPABILITIES_REG
+					      (pex_if)), tmp);
+				max_link_width = ((max_link_width >> 4) & 0x3F);
+				neg_link_width =
+				    reg_read(PEX_LINK_CTRL_STATUS_REG(pex_if));
+				DEBUG_RD_REG((PEX_LINK_CTRL_STATUS_REG(pex_if)),
+					     neg_link_width);
+				neg_link_width = ((neg_link_width >> 20) & 0x3F);
+				if (max_link_width > neg_link_width) {
+					tmp &= ~(0x3F << 4);
+					tmp |= (neg_link_width << 4);
+					reg_write(PEX_LINK_CAPABILITIES_REG
+						  (pex_if), tmp);
+					DEBUG_WR_REG((PEX_LINK_CAPABILITIES_REG
+						      (pex_if)), tmp);
+					mdelay(1);	/* wait 1ms before reading  capability for speed */
+					DEBUG_INIT_S("PEX");
+					DEBUG_INIT_D(pex_if, 1);
+					DEBUG_INIT_C(": change width to X",
+						     neg_link_width, 1);
+				}
+				tmp_pex_reg =
+				    reg_read((PEX_CFG_DIRECT_ACCESS
+					      (pex_if,
+					       PEX_LINK_CAPABILITY_REG)));
+				DEBUG_RD_REG((PEX_CFG_DIRECT_ACCESS
+					      (pex_if,
+					       PEX_LINK_CAPABILITY_REG)),
+					     tmp_pex_reg);
+				tmp_pex_reg &= (0xF);
+				if (tmp_pex_reg == 0x2) {
+					tmp_reg =
+					    (reg_read
+					     (PEX_CFG_DIRECT_ACCESS
+					      (pex_if,
+					       PEX_LINK_CTRL_STAT_REG)) &
+					     0xF0000) >> 16;
+					DEBUG_RD_REG(PEX_CFG_DIRECT_ACCESS
+						     (pex_if,
+						      PEX_LINK_CTRL_STAT_REG),
+						     tmp_pex_reg);
+					/* check if the link established is GEN1 */
+					if (tmp_reg == 0x1) {
+						pex_local_bus_num_set(pex_if,
+								      first_busno);
+						pex_local_dev_num_set(pex_if,
+								      1);
+
+						DEBUG_INIT_FULL_S("** Link is Gen1, check the EP capability\n");
+						/* link is Gen1, check the EP capability */
+						addr =
+						    pex_cfg_read(pex_if,
+								 first_busno, 0,
+								 0,
+								 0x34) & 0xFF;
+						DEBUG_INIT_FULL_C("pex_cfg_read: return addr=0x%x",
+						     addr, 4);
+						if (addr == 0xff) {
+							DEBUG_INIT_FULL_C("pex_cfg_read: return 0xff -->PEX (%d): Detected No Link.",
+									  pex_if, 1);
+							continue;
+						}
+						while ((pex_cfg_read
+							(pex_if, first_busno, 0,
+							 0,
+							 addr) & 0xFF) !=
+						       0x10) {
+							addr =
+							    (pex_cfg_read
+							     (pex_if,
+							      first_busno, 0, 0,
+							      addr) & 0xFF00) >>
+							    8;
+						}
+						if ((pex_cfg_read
+						     (pex_if, first_busno, 0, 0,
+						      addr + 0xC) & 0xF) >=
+						    0x2) {
+							tmp =
+							    reg_read
+							    (PEX_LINK_CTRL_STATUS2_REG
+							     (pex_if));
+							DEBUG_RD_REG
+							    (PEX_LINK_CTRL_STATUS2_REG
+							     (pex_if), tmp);
+							tmp &= ~(0x1 | 1 << 1);
+							tmp |= (1 << 1);
+							reg_write
+							    (PEX_LINK_CTRL_STATUS2_REG
+							     (pex_if), tmp);
+							DEBUG_WR_REG
+							    (PEX_LINK_CTRL_STATUS2_REG
+							     (pex_if), tmp);
+
+							tmp =
+							    reg_read
+							    (PEX_CTRL_REG
+							     (pex_if));
+							DEBUG_RD_REG
+							    (PEX_CTRL_REG
+							     (pex_if), tmp);
+							tmp |= (1 << 10);
+							reg_write(PEX_CTRL_REG
+								  (pex_if),
+								  tmp);
+							DEBUG_WR_REG
+							    (PEX_CTRL_REG
+							     (pex_if), tmp);
+							mdelay(10);	/* We need to wait 10ms before reading the PEX_DBG_STATUS_REG in order not to read the status of the former state */
+							DEBUG_INIT_FULL_S
+							    ("Gen2 client!\n");
+						} else {
+							DEBUG_INIT_FULL_S
+							    ("GEN1 client!\n");
+						}
+					}
+				}
+			} else {
+				DEBUG_INIT_FULL_S("PEX");
+				DEBUG_INIT_FULL_D(pex_if, 1);
+				DEBUG_INIT_FULL_S(" : Detected No Link. Status Reg(0x");
+				DEBUG_INIT_FULL_D(PEX_DBG_STATUS_REG(pex_if),
+						  8);
+				DEBUG_INIT_FULL_C(") = 0x", tmp, 8);
+			}
+
+			if ((pex_if < 8) &&
+			    (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
+				pex_if += 3;
+		}
+	}
+
+	/* Step 18: update pex DEVICE ID */
+	{
+		u32 devId;
+		pex_if_num = pex_max_if_get();
+		ctrl_mode = ctrl_model_get();
+		for (pex_if = 0; pex_if < pex_if_num; pex_if++) {
+			pex_unit = (pex_if < 9) ? (pex_if >> 2) : 3;
+			if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) {
+				if ((pex_if < 8) &&
+				    (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
+					pex_if += 3;
+				continue;
+			}
+
+			devId = reg_read(PEX_CFG_DIRECT_ACCESS(
+						 pex_if, PEX_DEVICE_AND_VENDOR_ID));
+			devId &= 0xFFFF;
+			devId |= ((ctrl_mode << 16) & 0xffff0000);
+			DEBUG_INIT_FULL_S("Update Device ID PEX");
+			DEBUG_INIT_FULL_D(pex_if, 1);
+			DEBUG_INIT_FULL_D(devId, 8);
+			DEBUG_INIT_FULL_S("\n");
+			reg_write(PEX_CFG_DIRECT_ACCESS
+				  (pex_if, PEX_DEVICE_AND_VENDOR_ID), devId);
+			if ((pex_if < 8) &&
+			    (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
+				pex_if += 3;
+		}
+		DEBUG_INIT_FULL_S("Update PEX Device ID 0x");
+		DEBUG_INIT_FULL_D(ctrl_mode, 4);
+		DEBUG_INIT_FULL_S("0\n");
+	}
+	tmp = reg_read(PEX_DBG_STATUS_REG(0));
+	DEBUG_RD_REG(PEX_DBG_STATUS_REG(0), tmp);
+
+	DEBUG_INIT_S(ENDED_OK);
+	return MV_OK;
+}
+
+/* PEX configuration space read write */
+
+/*
+ * pex_cfg_read - Read from configuration space
+ *
+ * DESCRIPTION:
+ *       This function performs a 32 bit read from PEX configuration space.
+ *       It supports both type 0 and type 1 of Configuration Transactions
+ *       (local and over bridge). In order to read from local bus segment, use
+ *       bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers
+ *       will result configuration transaction of type 1 (over bridge).
+ *
+ * INPUT:
+ *       pex_if   - PEX interface number.
+ *       bus     - PEX segment bus number.
+ *       dev     - PEX device number.
+ *       func    - Function number.
+ *       offss - Register offset.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       32bit register data, 0xffffffff on error
+ *
+ */
+u32 pex_cfg_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 offs)
+{
+	u32 pex_data = 0;
+	u32 local_dev, local_bus;
+	u32 val;
+
+	if (pex_if >= MV_PEX_MAX_IF)
+		return 0xFFFFFFFF;
+
+	if (dev >= MAX_PEX_DEVICES) {
+		DEBUG_INIT_C("pex_cfg_read: ERR. device number illigal ", dev,
+			     1);
+		return 0xFFFFFFFF;
+	}
+
+	if (func >= MAX_PEX_FUNCS) {
+		DEBUG_INIT_C("pex_cfg_read: ERR. function num illigal ", func,
+			     1);
+		return 0xFFFFFFFF;
+	}
+
+	if (bus >= MAX_PEX_BUSSES) {
+		DEBUG_INIT_C("pex_cfg_read: ERR. bus number illigal ", bus, 1);
+		return MV_ERROR;
+	}
+	val = reg_read(PEX_STATUS_REG(pex_if));
+
+	local_dev =
+	    ((val & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS);
+	local_bus =
+	    ((val & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS);
+
+	/* Speed up the process. In case on no link, return MV_ERROR */
+	if ((dev != local_dev) || (bus != local_bus)) {
+		pex_data = reg_read(PEX_STATUS_REG(pex_if));
+
+		if ((pex_data & PXSR_DL_DOWN))
+			return MV_ERROR;
+	}
+
+	/*
+	 * In PCI Express we have only one device number
+	 * and this number is the first number we encounter else that the
+	 * local_dev spec pex define return on config read/write on any device
+	 */
+	if (bus == local_bus) {
+		if (local_dev == 0) {
+			/*
+			 * If local dev is 0 then the first number we encounter
+			 * after 0 is 1
+			 */
+			if ((dev != 1) && (dev != local_dev))
+				return MV_ERROR;
+		} else {
+			/*
+			 * If local dev is not 0 then the first number we
+			 * encounter is 0
+			 */
+			if ((dev != 0) && (dev != local_dev))
+				return MV_ERROR;
+		}
+	}
+
+	/* Creating PEX address to be passed */
+	pex_data = (bus << PXCAR_BUS_NUM_OFFS);
+	pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS);
+	pex_data |= (func << PXCAR_FUNC_NUM_OFFS);
+	pex_data |= (offs & PXCAR_REG_NUM_MASK);	/* lgacy register space */
+	/* extended register space */
+	pex_data |= (((offs & PXCAR_REAL_EXT_REG_NUM_MASK) >>
+		     PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
+
+	pex_data |= PXCAR_CONFIG_EN;
+
+	/* Write the address to the PEX configuration address register */
+	reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data);
+
+	/*
+	 * In order to let the PEX controller absorbed the address of the read
+	 * transaction we perform a validity check that the address was written
+	 */
+	if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if)))
+		return MV_ERROR;
+
+	/* cleaning Master Abort */
+	reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND),
+		    PXSAC_MABORT);
+	/* Read the Data returned in the PEX Data register */
+	pex_data = reg_read(PEX_CFG_DATA_REG(pex_if));
+
+	DEBUG_INIT_FULL_C(" --> ", pex_data, 4);
+
+	return pex_data;
+}
+
+/*
+ * pex_local_bus_num_set - Set PEX interface local bus number.
+ *
+ * DESCRIPTION:
+ *       This function sets given PEX interface its local bus number.
+ *       Note: In case the PEX interface is PEX-X, the information is read-only.
+ *
+ * INPUT:
+ *       pex_if  - PEX interface number.
+ *       bus_num - Bus number.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       MV_NOT_ALLOWED in case PEX interface is PEX-X.
+ *		MV_BAD_PARAM on bad parameters ,
+ *       otherwise MV_OK
+ *
+ */
+int pex_local_bus_num_set(u32 pex_if, u32 bus_num)
+{
+	u32 val;
+
+	if (bus_num >= MAX_PEX_BUSSES) {
+		DEBUG_INIT_C("pex_local_bus_num_set: ERR. bus number illigal %d\n",
+		     bus_num, 4);
+		return MV_ERROR;
+	}
+
+	val = reg_read(PEX_STATUS_REG(pex_if));
+	val &= ~PXSR_PEX_BUS_NUM_MASK;
+	val |= (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK;
+	reg_write(PEX_STATUS_REG(pex_if), val);
+
+	return MV_OK;
+}
+
+/*
+ * pex_local_dev_num_set - Set PEX interface local device number.
+ *
+ * DESCRIPTION:
+ *       This function sets given PEX interface its local device number.
+ *       Note: In case the PEX interface is PEX-X, the information is read-only.
+ *
+ * INPUT:
+ *       pex_if  - PEX interface number.
+ *       dev_num - Device number.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       MV_NOT_ALLOWED in case PEX interface is PEX-X.
+ *		MV_BAD_PARAM on bad parameters ,
+ *       otherwise MV_OK
+ *
+ */
+int pex_local_dev_num_set(u32 pex_if, u32 dev_num)
+{
+	u32 val;
+
+	if (pex_if >= MV_PEX_MAX_IF)
+		return MV_BAD_PARAM;
+
+	val = reg_read(PEX_STATUS_REG(pex_if));
+	val &= ~PXSR_PEX_DEV_NUM_MASK;
+	val |= (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK;
+	reg_write(PEX_STATUS_REG(pex_if), val);
+
+	return MV_OK;
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c
new file mode 100644
index 000000000..539d23762
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "high_speed_env_spec.h"
+
+MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[] = {
+	/* SERDES TYPE, Low REG OFFS, Low REG VALUE, Hi REG OFS, Hi REG VALUE */
+	{
+		/* PEX: Change of Slew Rate port0   */
+		SERDES_UNIT_PEX, 0x0,
+		(0x0F << 16) | 0x2a21, 0x0, (0x0F << 16) | 0x2a21
+	}, {
+		/* PEX: Change PLL BW port0                   */
+		SERDES_UNIT_PEX, 0x0,
+		(0x4F << 16) | 0x6219, 0x0, (0x4F << 16) | 0x6219
+	}, {
+		/* SATA: Slew rate change port 0  */
+		SERDES_UNIT_SATA, 0x0083C, 0x8a31, 0x0083C, 0x8a31
+	}, {
+		/* SATA: Slew rate change port 0  */
+		SERDES_UNIT_SATA, 0x00834, 0xc928, 0x00834, 0xc928
+	}, {
+		/* SATA: Slew rate change port 0  */
+		SERDES_UNIT_SATA, 0x00838, 0x30f0, 0x00838, 0x30f0
+	}, {
+		/* SATA: Slew rate change port 0  */
+		SERDES_UNIT_SATA, 0x00840, 0x30f5, 0x00840, 0x30f5
+	}, {
+		/* SGMII: FFE setting Port0         */
+		SERDES_UNIT_SGMII0, 0x00E18, 0x989F, 0x00E18, 0x989F
+	}, {
+		/* SGMII: SELMUP and SELMUF Port0   */
+		SERDES_UNIT_SGMII0, 0x00E38, 0x10FA, 0x00E38, 0x10FA
+	}, {
+		/* SGMII: Amplitude new setting gen2 Port3 */
+		SERDES_UNIT_SGMII0, 0x00E34, 0xC968, 0x00E34, 0xC66C
+	}, {
+		/* QSGMII: Amplitude and slew rate change  */
+		SERDES_UNIT_QSGMII, 0x72E34, 0xaa58, 0x72E34, 0xaa58
+	}, {
+		/* QSGMII: SELMUP and SELMUF               */
+		SERDES_UNIT_QSGMII, 0x72e38, 0x10aF, 0x72e38, 0x10aF
+	}, {
+		/* QSGMII: 0x72e18                         */
+		SERDES_UNIT_QSGMII, 0x72e18, 0x98AC, 0x72e18, 0x98AC
+	}, {
+		/* Null terminated */
+		SERDES_UNIT_UNCONNECTED, 0, 0
+	}
+};
+
+MV_BIN_SERDES_CFG db88f78xx0_serdes_cfg[] = {
+	/* Z1B */
+	{MV_PEX_ROOT_COMPLEX, 0x32221111, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy},			/* Default */
+	{MV_PEX_ROOT_COMPLEX, 0x31211111, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy},			/* PEX module */
+	/* Z1A */
+	{MV_PEX_ROOT_COMPLEX, 0x32220000, 0x00000000,
+	 {PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED,
+	  PEX_BUS_DISABLED}, 0x0030, serdes_change_m_phy}, /* Default - Z1A */
+	{MV_PEX_ROOT_COMPLEX, 0x31210000, 0x00000000,
+	 {PEX_BUS_DISABLED, PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+	 0x0030, serdes_change_m_phy}	/* PEX module - Z1A */
+};
+
+MV_BIN_SERDES_CFG db88f78xx0rev2_serdes_cfg[] = {
+	/* A0 */
+	{MV_PEX_ROOT_COMPLEX, 0x33221111, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy}, /* Default: No Pex module, PEX0 x1, disabled */
+	{MV_PEX_ROOT_COMPLEX, 0x33211111, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x1, PEX1 x1 */
+	{MV_PEX_ROOT_COMPLEX, 0x33221111, 0x11111111,
+	 {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy}, /* no Pex module, PEX0 x4, PEX1 disabled */
+	{MV_PEX_ROOT_COMPLEX, 0x33211111, 0x11111111,
+	 {PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x4, PEX1 x1 */
+	{MV_PEX_ROOT_COMPLEX, 0x11111111, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x1, PEX1 x4 */
+	{MV_PEX_ROOT_COMPLEX, 0x11111111, 0x11111111,
+	 {PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x4, PEX1 x4 */
+};
+
+MV_BIN_SERDES_CFG rd78460nas_serdes_cfg[] = {
+	{MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy}, /* Default */
+	{MV_PEX_ROOT_COMPLEX, 0x33320201, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x00f4, serdes_change_m_phy}, /* Switch module */
+};
+
+MV_BIN_SERDES_CFG rd78460_serdes_cfg[] = {
+	{MV_PEX_ROOT_COMPLEX, 0x22321111, 0x00000000,
+	 {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+	 0x0010, serdes_change_m_phy}, /* CPU0 */
+	{MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
+	 {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+	 0x0010, serdes_change_m_phy} /* CPU1-3 */
+};
+
+MV_BIN_SERDES_CFG rd78460server_rev2_serdes_cfg[] = {
+	{MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
+	 {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+	 0x0010, serdes_change_m_phy}, /* CPU0 */
+	{MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
+	 {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+	 0x0010, serdes_change_m_phy} /* CPU1-3 */
+};
+
+MV_BIN_SERDES_CFG db78X60pcac_serdes_cfg[] = {
+	{MV_PEX_END_POINT, 0x22321111, 0x00000000,
+	 {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+	 0x0010, serdes_change_m_phy}	/* Default */
+};
+
+MV_BIN_SERDES_CFG db78X60pcacrev2_serdes_cfg[] = {
+	{MV_PEX_END_POINT, 0x23321111, 0x00000000,
+	 {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+	 0x0010, serdes_change_m_phy}	/* Default */
+};
+
+MV_BIN_SERDES_CFG fpga88f78xx0_serdes_cfg[] = {
+	{MV_PEX_ROOT_COMPLEX, 0x00000000, 0x00000000,
+	 {PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+	 0x0000, serdes_change_m_phy}	/* No PEX in FPGA */
+};
+
+MV_BIN_SERDES_CFG db78X60amc_serdes_cfg[] = {
+	{MV_PEX_ROOT_COMPLEX, 0x33111111, 0x00010001,
+	 {PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X1},
+	 0x0030, serdes_change_m_phy}	/* Default */
+};
+
+/*
+ * ARMADA-XP CUSTOMER BOARD
+ */
+MV_BIN_SERDES_CFG rd78460customer_serdes_cfg[] = {
+	{MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x00000030, serdes_change_m_phy}, /* Default */
+	{MV_PEX_ROOT_COMPLEX, 0x33320201, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x00000030, serdes_change_m_phy}, /* Switch module */
+};
+
+MV_BIN_SERDES_CFG rd78460AXP_GP_serdes_cfg[] = {
+	{MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
+	 {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+	 0x0030, serdes_change_m_phy}	/* Default */
+};
+
+MV_BIN_SERDES_CFG *serdes_info_tbl[] = {
+	db88f78xx0_serdes_cfg,
+	rd78460_serdes_cfg,
+	db78X60pcac_serdes_cfg,
+	fpga88f78xx0_serdes_cfg,
+	db88f78xx0rev2_serdes_cfg,
+	rd78460nas_serdes_cfg,
+	db78X60amc_serdes_cfg,
+	db78X60pcacrev2_serdes_cfg,
+	rd78460server_rev2_serdes_cfg,
+	rd78460AXP_GP_serdes_cfg,
+	rd78460customer_serdes_cfg
+};
+
+u8 rd78460gp_twsi_dev[] = { 0x4C, 0x4D, 0x4E };
+u8 db88f78xx0rev2_twsi_dev[] = { 0x4C, 0x4D, 0x4E, 0x4F };
diff --git a/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h
new file mode 100644
index 000000000..b920f5ef0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#ifndef __HIGHSPEED_ENV_SPEC_H
+#define __HIGHSPEED_ENV_SPEC_H
+
+#include "../../../drivers/ddr/marvell/axp/ddr3_hw_training.h"
+
+typedef enum {
+	SERDES_UNIT_UNCONNECTED	= 0x0,
+	SERDES_UNIT_PEX		= 0x1,
+	SERDES_UNIT_SATA	= 0x2,
+	SERDES_UNIT_SGMII0	= 0x3,
+	SERDES_UNIT_SGMII1	= 0x4,
+	SERDES_UNIT_SGMII2	= 0x5,
+	SERDES_UNIT_SGMII3	= 0x6,
+	SERDES_UNIT_QSGMII	= 0x7,
+	SERDES_UNIT_SETM        = 0x8,
+	SERDES_LAST_UNIT
+} MV_BIN_SERDES_UNIT_INDX;
+
+
+typedef enum {
+	PEX_BUS_DISABLED	= 0,
+	PEX_BUS_MODE_X1		= 1,
+	PEX_BUS_MODE_X4		= 2,
+	PEX_BUS_MODE_X8		= 3
+} MV_PEX_UNIT_CFG;
+
+typedef enum pex_type {
+	MV_PEX_ROOT_COMPLEX,	/* root complex device */
+	MV_PEX_END_POINT	/* end point device */
+} MV_PEX_TYPE;
+
+typedef struct serdes_change_m_phy {
+	MV_BIN_SERDES_UNIT_INDX type;
+	u32 reg_low_speed;
+	u32 val_low_speed;
+	u32 reg_hi_speed;
+	u32 val_hi_speed;
+} MV_SERDES_CHANGE_M_PHY;
+
+/*
+ * Configuration per SERDES line. Each nibble is MV_SERDES_LINE_TYPE
+ */
+typedef struct board_serdes_conf {
+	MV_PEX_TYPE pex_type; /* MV_PEX_ROOT_COMPLEX MV_PEX_END_POINT */
+	u32 line0_7; /* Lines 0 to 7 SERDES MUX one nibble per line */
+	u32 line8_15; /* Lines 8 to 15 SERDES MUX one nibble per line */
+	MV_PEX_UNIT_CFG pex_mode[4];
+
+	/*
+	 * Bus speed - one bit per SERDES line:
+	 *		Low speed (0)		High speed (1)
+	 * PEX		2.5 G (10 bit)		5 G (20 bit)
+	 * SATA		1.5 G			3 G
+	 * SGMII	1.25 Gbps		3.125 Gbps
+	 */
+	u32	bus_speed;
+
+	MV_SERDES_CHANGE_M_PHY *serdes_m_phy_change;
+} MV_BIN_SERDES_CFG;
+
+
+#define BIN_SERDES_CFG {	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 0 */	\
+	{0, 1, -1 , -1, -1, -1, -1, -1,  2}, /* Lane 1 */	\
+	{0, 1, -1 ,  2, -1, -1, -1, -1,  3}, /* Lane 2 */	\
+	{0, 1, -1 , -1,  2, -1, -1,  3, -1}, /* Lane 3 */	\
+	{0, 1,  2 , -1, -1,  3, -1, -1,  4}, /* Lane 4 */	\
+	{0, 1,  2 , -1,  3, -1, -1,  4, -1}, /* Lane 5 */	\
+	{0, 1,  2 ,  4, -1,  3, -1, -1, -1}, /* Lane 6 */	\
+	{0, 1, -1 ,  2, -1, -1,  3, -1,  4}, /* Lane 7*/	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 8 */	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 9 */	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 10 */	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 11 */	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 12 */	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 13 */	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 14 */	\
+	{0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 15 */	\
+}
+
+#endif /* __HIGHSPEED_ENV_SPEC_H */
diff --git a/roms/u-boot/arch/arm/mach-mvebu/spl.c b/roms/u-boot/arch/arm/mach-mvebu/spl.c
new file mode 100644
index 000000000..16ebb7a59
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/spl.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014-2016 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <debug_uart.h>
+#include <fdtdec.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+static u32 get_boot_device(void)
+{
+	u32 val;
+	u32 boot_device;
+
+	/*
+	 * First check, if UART boot-mode is active. This can only
+	 * be done, via the bootrom error register. Here the
+	 * MSB marks if the UART mode is active.
+	 */
+	val = readl(CONFIG_BOOTROM_ERR_REG);
+	boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS;
+	debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device);
+	if (boot_device == BOOTROM_ERR_MODE_UART)
+		return BOOT_DEVICE_UART;
+
+#ifdef CONFIG_ARMADA_38X
+	/*
+	 * If the bootrom error code contains any other than zeros it's an
+	 * error condition and the bootROM has fallen back to UART boot
+	 */
+	boot_device = (val & BOOTROM_ERR_CODE_MASK) >> BOOTROM_ERR_CODE_OFFS;
+	if (boot_device)
+		return BOOT_DEVICE_UART;
+#endif
+
+	/*
+	 * Now check the SAR register for the strapped boot-device
+	 */
+	val = readl(CONFIG_SAR_REG);	/* SAR - Sample At Reset */
+	boot_device = (val & BOOT_DEV_SEL_MASK) >> BOOT_DEV_SEL_OFFS;
+	debug("SAR_REG=0x%08x boot_device=0x%x\n", val, boot_device);
+	switch (boot_device) {
+#if defined(CONFIG_ARMADA_38X)
+	case BOOT_FROM_NAND:
+		return BOOT_DEVICE_NAND;
+#endif
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case BOOT_FROM_MMC:
+	case BOOT_FROM_MMC_ALT:
+		return BOOT_DEVICE_MMC1;
+#endif
+	case BOOT_FROM_UART:
+#ifdef BOOT_FROM_UART_ALT
+	case BOOT_FROM_UART_ALT:
+#endif
+		return BOOT_DEVICE_UART;
+#ifdef BOOT_FROM_SATA
+	case BOOT_FROM_SATA:
+	case BOOT_FROM_SATA_ALT:
+		return BOOT_DEVICE_SATA;
+#endif
+	case BOOT_FROM_SPI:
+	default:
+		return BOOT_DEVICE_SPI;
+	};
+}
+
+u32 spl_boot_device(void)
+{
+	return get_boot_device();
+}
+
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+	/*
+	 * Pin muxing needs to be done before UART output, since
+	 * on A38x the UART pins need some re-muxing for output
+	 * to work.
+	 */
+	board_early_init_f();
+
+	/* Example code showing how to enable the debug UART on MVEBU */
+#ifdef EARLY_UART
+	/*
+	 * Debug UART can be used from here if required:
+	 *
+	 * debug_uart_init();
+	 * printch('a');
+	 * printhex8(0x1234);
+	 * printascii("string");
+	 */
+#endif
+
+	/*
+	 * Use special translation offset for SPL. This needs to be
+	 * configured *before* spl_init() is called as this function
+	 * calls dm_init() which calls the bind functions of the
+	 * device drivers. Here the base address needs to be configured
+	 * (translated) correctly.
+	 */
+	gd->translation_offset = 0xd0000000 - 0xf1000000;
+
+	ret = spl_init();
+	if (ret) {
+		debug("spl_init() failed: %d\n", ret);
+		hang();
+	}
+
+	preloader_console_init();
+
+	timer_init();
+
+	/* Armada 375 does not support SerDes and DDR3 init yet */
+#if !defined(CONFIG_ARMADA_375)
+	/* First init the serdes PHY's */
+	serdes_phy_config();
+
+	/* Setup DDR */
+	ddr3_init();
+#endif
+
+	/* Initialize Auto Voltage Scaling */
+	mv_avs_init();
+
+	/* Update read timing control for PCIe */
+	mv_rtc_config();
+
+	/*
+	 * Return to the BootROM to continue the Marvell xmodem
+	 * UART boot protocol. As initiated by the kwboot tool.
+	 *
+	 * This can only be done by the BootROM and not by the
+	 * U-Boot SPL infrastructure, since the beginning of the
+	 * image is already read and interpreted by the BootROM.
+	 * SPL has no chance to receive this information. So we
+	 * need to return to the BootROM to enable this xmodem
+	 * UART download.
+	 *
+	 * If booting from NAND lets let the BootROM load the
+	 * rest of the bootloader.
+	 */
+	switch (get_boot_device()) {
+		case BOOT_DEVICE_UART:
+#if defined(CONFIG_ARMADA_38X)
+		case BOOT_DEVICE_NAND:
+#endif
+			return_to_bootrom();
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-mvebu/timer.c b/roms/u-boot/arch/arm/mach-mvebu/timer.c
new file mode 100644
index 000000000..557a37877
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-mvebu/timer.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/soc.h>
+#include <linux/bitops.h>
+
+#define TIMER_LOAD_VAL			0xffffffff
+
+static int init_done __section(".data") = 0;
+
+/*
+ * Timer initialization
+ */
+int timer_init(void)
+{
+	/* Only init the timer once */
+	if (init_done)
+		return 0;
+	init_done = 1;
+
+	/* load value into timer */
+	writel(TIMER_LOAD_VAL, MVEBU_TIMER_BASE + 0x10);
+	writel(TIMER_LOAD_VAL, MVEBU_TIMER_BASE + 0x14);
+
+#if defined(CONFIG_ARCH_MVEBU)
+	/* On Armada XP / 38x ..., the 25MHz clock source needs to be enabled */
+	setbits_le32(MVEBU_TIMER_BASE + 0x00, BIT(11));
+#endif
+	/* enable timer in auto reload mode */
+	setbits_le32(MVEBU_TIMER_BASE + 0x00, 0x3);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-nexell/Kconfig b/roms/u-boot/arch/arm/mach-nexell/Kconfig
new file mode 100644
index 000000000..ffa4d4865
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/Kconfig
@@ -0,0 +1,58 @@
+if ARCH_NEXELL
+
+config ARCH_S5P4418
+	bool "Nexell S5P4418 SoC"
+	select CPU_V7A
+	select OF_CONTROL
+	select OF_SEPARATE
+	select NX_GPIO
+	select PL011_SERIAL
+	select PL011_SERIAL_FLUSH_ON_INIT
+	help
+	  Enable support for Nexell S5P4418 SoC.
+
+config ARCH_S5P6818
+	bool "Nexell S5P6818 SoC"
+	select ARM64
+	select ARMV8_MULTIENTRY
+	help
+	  Enable support for Nexell S5P6818 SoC.
+
+menu "Nexell S5P4418/S5P6818"
+	depends on ARCH_NEXELL
+
+choice
+	prompt "Nexell S5P4418/S5P6818 board select"
+	optional
+
+config TARGET_NANOPI2
+	bool "FriendlyARM NanoPi2 / NanoPC-T2 Board"
+	select ARCH_S5P4418
+	help
+	  Enable support for FriendlyARM NanoPi2 and NanoPC-T2 Boards.
+
+endchoice
+
+config SYS_BOARD
+	default "nanopi2"
+
+config SYS_VENDOR
+	default "friendlyarm"
+
+config SYS_SOC
+	default "nexell"
+
+config SYS_CONFIG_NAME
+	default "s5p4418_nanopi2"
+
+endmenu
+
+config SYS_PLLFIN
+	int
+
+config TIMER_SYS_TICK_CH
+	int
+
+source "board/friendlyarm/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-nexell/Makefile b/roms/u-boot/arch/arm/mach-nexell/Makefile
new file mode 100644
index 000000000..dda16dbb8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 Nexell
+# Hyunseok, Jung <hsjung@nexell.co.kr>
+
+obj-y				+= clock.o
+obj-y				+= timer.o
+obj-y				+= reset.o
+obj-y				+= nx_gpio.o
+obj-y				+= tieoff.o
+obj-$(CONFIG_ARCH_S5P4418)	+= reg-call.o
+obj-$(CONFIG_ARCH_S5P4418)	+= nx_sec_reg.o
diff --git a/roms/u-boot/arch/arm/mach-nexell/clock.c b/roms/u-boot/arch/arm/mach-nexell/clock.c
new file mode 100644
index 000000000..d5b46a87a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/clock.c
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung@nexell.co.kr>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/clk.h>
+
+/*
+ * clock generator macros
+ */
+#define	I_PLL0_BIT		(0)
+#define	I_PLL1_BIT		(1)
+#define	I_PLL2_BIT		(2)
+#define	I_PLL3_BIT		(3)
+#define	I_EXT1_BIT		(4)
+#define	I_EXT2_BIT		(5)
+#define	I_CLKn_BIT		(7)
+#define	I_EXT1_BIT_FORCE	(8)
+#define	I_EXT2_BIT_FORCE	(9)
+
+#define	I_CLOCK_NUM		6 /* PLL0, PLL1, PLL2, PLL3, EXT1, EXT2 */
+
+#define I_EXECEPT_CLK		(0)
+#define	I_CLOCK_MASK		(((1 << I_CLOCK_NUM) - 1) & ~I_EXECEPT_CLK)
+
+#define	I_PLL0			(1 << I_PLL0_BIT)
+#define	I_PLL1			(1 << I_PLL1_BIT)
+#define	I_PLL2			(1 << I_PLL2_BIT)
+#define	I_PLL3			(1 << I_PLL3_BIT)
+#define	I_EXTCLK1		(1 << I_EXT1_BIT)
+#define	I_EXTCLK2		(1 << I_EXT2_BIT)
+#define	I_EXTCLK1_FORCE		(1 << I_EXT1_BIT_FORCE)
+#define	I_EXTCLK2_FORCE		(1 << I_EXT2_BIT_FORCE)
+
+#define	I_PLL_0_1		(I_PLL0    | I_PLL1)
+#define	I_PLL_0_2		(I_PLL_0_1 | I_PLL2)
+#define	I_PLL_0_3		(I_PLL_0_2 | I_PLL3)
+#define	I_CLKnOUT		(0)
+
+#define	I_PCLK			(1 << 16)
+#define	I_BCLK			(1 << 17)
+#define	I_GATE_PCLK		(1 << 20)
+#define	I_GATE_BCLK		(1 << 21)
+#define	I_PCLK_MASK		(I_GATE_PCLK | I_PCLK)
+#define	I_BCLK_MASK		(I_GATE_BCLK | I_BCLK)
+
+struct clk_dev_peri {
+	const char *dev_name;
+	void __iomem *base;
+	int dev_id;
+	int periph_id;
+	int clk_step;
+	u32 in_mask;
+	u32 in_mask1;
+	int div_src_0;
+	int div_val_0;
+	int invert_0;
+	int div_src_1;
+	int div_val_1;
+	int invert_1;
+	int in_extclk_1;
+	int in_extclk_2;
+};
+
+struct clk_dev {
+	struct clk  clk;
+	struct clk *link;
+	const char *name;
+	struct clk_dev_peri *peri;
+};
+
+struct clk_dev_map {
+	unsigned int con_enb;
+	unsigned int con_gen[4];
+};
+
+#define CLK_PERI_1S(name, devid, id, addr, mk)[id] = \
+	{ .dev_name = name, .dev_id = devid, .periph_id = id, .clk_step = 1, \
+	.base = (void *)addr, .in_mask = mk, }
+
+#define CLK_PERI_2S(name, devid, id, addr, mk, mk2)[id] = \
+	{ .dev_name = name, .dev_id = devid, .periph_id = id, .clk_step = 2, \
+	.base = (void *)addr, .in_mask = mk, .in_mask1 = mk2, }
+
+static const char * const clk_core[] = {
+	CORECLK_NAME_PLL0, CORECLK_NAME_PLL1, CORECLK_NAME_PLL2,
+	CORECLK_NAME_PLL3, CORECLK_NAME_FCLK, CORECLK_NAME_MCLK,
+	CORECLK_NAME_BCLK, CORECLK_NAME_PCLK, CORECLK_NAME_HCLK,
+};
+
+/*
+ * Section ".data" must be used because BSS is not available before relocation,
+ * in board_init_f(), respectively! I.e. global variables can not be used!
+ */
+static struct clk_dev_peri clk_periphs[]
+	__section(".data") = {
+	CLK_PERI_1S(DEV_NAME_TIMER,	0,	CLK_ID_TIMER_0,
+		    PHY_BASEADDR_CLKGEN14, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_TIMER,	1,	CLK_ID_TIMER_1,
+		    PHY_BASEADDR_CLKGEN0, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_TIMER,	2,	CLK_ID_TIMER_2,
+		    PHY_BASEADDR_CLKGEN1, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_TIMER,	3,	CLK_ID_TIMER_3,
+		    PHY_BASEADDR_CLKGEN2, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_UART,	0,	CLK_ID_UART_0,
+		    PHY_BASEADDR_CLKGEN22, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_UART,	1,	CLK_ID_UART_1,
+		    PHY_BASEADDR_CLKGEN24, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_UART,	2,	CLK_ID_UART_2,
+		    PHY_BASEADDR_CLKGEN23, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_UART,	3,	CLK_ID_UART_3,
+		    PHY_BASEADDR_CLKGEN25, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_UART,	4,	CLK_ID_UART_4,
+		    PHY_BASEADDR_CLKGEN26, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_UART,	5,	CLK_ID_UART_5,
+		    PHY_BASEADDR_CLKGEN27, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_PWM,	0,	CLK_ID_PWM_0,
+		    PHY_BASEADDR_CLKGEN13, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_PWM,	1,	CLK_ID_PWM_1,
+		    PHY_BASEADDR_CLKGEN3, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_PWM,	2,	CLK_ID_PWM_2,
+		    PHY_BASEADDR_CLKGEN4, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_PWM,	3,	CLK_ID_PWM_3,
+		    PHY_BASEADDR_CLKGEN5, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_I2C,	0,	CLK_ID_I2C_0,
+		    PHY_BASEADDR_CLKGEN6, (I_GATE_PCLK)),
+	CLK_PERI_1S(DEV_NAME_I2C,	1,	CLK_ID_I2C_1,
+		    PHY_BASEADDR_CLKGEN7, (I_GATE_PCLK)),
+	CLK_PERI_1S(DEV_NAME_I2C,	2,	CLK_ID_I2C_2,
+		    PHY_BASEADDR_CLKGEN8, (I_GATE_PCLK)),
+	CLK_PERI_2S(DEV_NAME_GMAC,	0,	CLK_ID_GMAC,
+		    PHY_BASEADDR_CLKGEN10,
+		    (I_PLL_0_3 | I_EXTCLK1 | I_EXTCLK1_FORCE),
+		    (I_CLKnOUT)),
+	CLK_PERI_2S(DEV_NAME_I2S,	0,	CLK_ID_I2S_0,
+		    PHY_BASEADDR_CLKGEN15, (I_PLL_0_3 | I_EXTCLK1),
+		    (I_CLKnOUT)),
+	CLK_PERI_2S(DEV_NAME_I2S,	1,	CLK_ID_I2S_1,
+		    PHY_BASEADDR_CLKGEN16, (I_PLL_0_3 | I_EXTCLK1),
+		    (I_CLKnOUT)),
+	CLK_PERI_2S(DEV_NAME_I2S,	2,	CLK_ID_I2S_2,
+		    PHY_BASEADDR_CLKGEN17, (I_PLL_0_3 | I_EXTCLK1),
+		    (I_CLKnOUT)),
+	CLK_PERI_1S(DEV_NAME_SDHC,	0,	CLK_ID_SDHC_0,
+		    PHY_BASEADDR_CLKGEN18, (I_PLL_0_2 | I_GATE_PCLK)),
+	CLK_PERI_1S(DEV_NAME_SDHC,	1,	CLK_ID_SDHC_1,
+		    PHY_BASEADDR_CLKGEN19, (I_PLL_0_2 | I_GATE_PCLK)),
+	CLK_PERI_1S(DEV_NAME_SDHC,	2,	CLK_ID_SDHC_2,
+		    PHY_BASEADDR_CLKGEN20, (I_PLL_0_2 | I_GATE_PCLK)),
+	CLK_PERI_1S(DEV_NAME_SPI,	0,	CLK_ID_SPI_0,
+		    PHY_BASEADDR_CLKGEN37, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_SPI,	1,	CLK_ID_SPI_1,
+		    PHY_BASEADDR_CLKGEN38, (I_PLL_0_2)),
+	CLK_PERI_1S(DEV_NAME_SPI,	2,	CLK_ID_SPI_2,
+		    PHY_BASEADDR_CLKGEN39, (I_PLL_0_2)),
+};
+
+#define	CLK_PERI_NUM		((int)ARRAY_SIZE(clk_periphs))
+#define	CLK_CORE_NUM		((int)ARRAY_SIZE(clk_core))
+#define	CLK_DEVS_NUM		(CLK_CORE_NUM + CLK_PERI_NUM)
+#define	MAX_DIVIDER		((1 << 8) - 1)	/* 256, align 2 */
+
+static struct clk_dev		st_clk_devs[CLK_DEVS_NUM]
+				__section(".data");
+#define	clk_dev_get(n)		((struct clk_dev *)&st_clk_devs[n])
+#define	clk_container(p)	(container_of(p, struct clk_dev, clk))
+
+/*
+ * Core frequencys
+ */
+struct _core_hz_ {
+	unsigned long pll[4];					/* PLL */
+	unsigned long cpu_fclk, cpu_bclk;			/* cpu */
+	unsigned long mem_fclk, mem_dclk, mem_bclk, mem_pclk;	/* ddr */
+	unsigned long bus_bclk, bus_pclk;			/* bus */
+#if defined(CONFIG_ARCH_S5P6818)
+	unsigned long cci4_bclk, cci4_pclk;			/* cci */
+#endif
+	/* ip */
+	unsigned long g3d_bclk;
+	unsigned long coda_bclk, coda_pclk;
+#if defined(CONFIG_ARCH_S5P6818)
+	unsigned long disp_bclk, disp_pclk;
+	unsigned long hdmi_pclk;
+#endif
+};
+
+/*
+ * Section ".data" must be used because BSS is not available before relocation,
+ * in board_init_f(), respectively! I.e. global variables can not be used!
+ */
+/* core clock */
+static struct _core_hz_ core_hz __section(".data");
+
+#define	CORE_HZ_SIZE	(sizeof(core_hz) / 4)
+
+/*
+ * CLKGEN HW
+ */
+static inline void clk_dev_bclk(void *base, int on)
+{
+	struct clk_dev_map *reg = base;
+	unsigned int val = readl(&reg->con_enb) & ~(0x3);
+
+	val |= (on ? 3 : 0) & 0x3;	/* always BCLK */
+	writel(val, &reg->con_enb);
+}
+
+static inline void clk_dev_pclk(void *base, int on)
+{
+	struct clk_dev_map *reg = base;
+	unsigned int val = 0;
+
+	if (!on)
+		return;
+
+	val	 = readl(&reg->con_enb) & ~(1 << 3);
+	val |= (1 << 3);
+	writel(val, &reg->con_enb);
+}
+
+static inline void clk_dev_rate(void *base, int step, int src, int div)
+{
+	struct clk_dev_map *reg = base;
+	unsigned int val = 0;
+
+	val  = readl(&reg->con_gen[step << 1]);
+	val &= ~(0x07   << 2);
+	val |=  (src    << 2);	/* source */
+	val	&= ~(0xFF   << 5);
+	val	|=  (div - 1) << 5;	/* divider */
+	writel(val, &reg->con_gen[step << 1]);
+}
+
+static inline void clk_dev_inv(void *base, int step, int inv)
+{
+	struct clk_dev_map *reg = base;
+	unsigned int val = readl(&reg->con_gen[step << 1]) & ~(1 << 1);
+
+	val	|= (inv << 1);
+	writel(val, &reg->con_gen[step << 1]);
+}
+
+static inline void clk_dev_enb(void *base, int on)
+{
+	struct clk_dev_map *reg = base;
+	unsigned int val = readl(&reg->con_enb) & ~(1 << 2);
+
+	val	|= ((on ? 1 : 0) << 2);
+	writel(val, &reg->con_enb);
+}
+
+/*
+ * CORE FREQUENCY
+ *
+ * PLL0 [P,M,S]	-------	| | ----- [DIV0] --- CPU-G0
+ *			|M| ----- [DIV1] --- BCLK/PCLK
+ * PLL1 [P,M,S]	-------	| | ----- [DIV2] --- DDR
+ *			|U| ----- [DIV3] --- 3D
+ * PLL2 [P,M,S,K]-------| | ----- [DIV4] --- CODA
+ *			|X| ----- [DIV5] --- DISPLAY
+ * PLL3 [P,M,S,K]-------| | ----- [DIV6] --- HDMI
+ *			| | ----- [DIV7] --- CPU-G1
+ *			| | ----- [DIV8] --- CCI-400(FASTBUS)
+ *
+ */
+
+struct	nx_clkpwr_registerset {
+	u32 clkmodereg0;	/* 0x000 : Clock Mode Register0 */
+	u32 __reserved0;	/* 0x004 */
+	u32 pllsetreg[4];	/* 0x008 ~ 0x014 : PLL Setting Register */
+	u32 __reserved1[2];	/* 0x018 ~ 0x01C */
+	u32 dvoreg[9];		/* 0x020 ~ 0x040 : Divider Setting Register */
+	u32 __Reserved2;	/* 0x044 */
+	u32 pllsetreg_sscg[6];	/* 0x048 ~ 0x05C */
+	u32 __reserved3[8];		/* 0x060 ~ 0x07C */
+	u8 __reserved4[0x200 - 0x80];	/* padding (0x80 ~ 0x1FF) */
+	u32 gpiowakeupriseenb;	/* 0x200 : GPIO Rising Edge Detect En. Reg. */
+	u32 gpiowakeupfallenb;	/* 0x204 : GPIO Falling Edge Detect En. Reg. */
+	u32 gpiorstenb;		/* 0x208 : GPIO Reset Enable Register */
+	u32 gpiowakeupenb;	/* 0x20C : GPIO Wakeup Source Enable */
+	u32 gpiointenb;		/* 0x210 : Interrupt Enable Register */
+	u32 gpiointpend;	/* 0x214 : Interrupt Pend Register */
+	u32 resetstatus;	/* 0x218 : Reset Status Register */
+	u32 intenable;		/* 0x21C : Interrupt Enable Register */
+	u32 intpend;		/* 0x220 : Interrupt Pend Register */
+	u32 pwrcont;		/* 0x224 : Power Control Register */
+	u32 pwrmode;		/* 0x228 : Power Mode Register */
+	u32 __reserved5;	/* 0x22C : Reserved Region */
+	u32 scratch[3];		/* 0x230 ~ 0x238 : Scratch Register */
+	u32 sysrstconfig;	/* 0x23C : System Reset Configuration Reg. */
+	u8  __reserved6[0x2A0 - 0x240];	/* padding (0x240 ~ 0x29F) */
+	u32 cpupowerdownreq;	/* 0x2A0 : CPU Power Down Request Register */
+	u32 cpupoweronreq;	/* 0x2A4 : CPU Power On Request Register */
+	u32 cpuresetmode;	/* 0x2A8 : CPU Reset Mode Register */
+	u32 cpuwarmresetreq;	/* 0x2AC : CPU Warm Reset Request Register */
+	u32 __reserved7;	/* 0x2B0 */
+	u32 cpustatus;		/* 0x2B4 : CPU Status Register */
+	u8  __reserved8[0x400 - 0x2B8];	/* padding (0x2B8 ~ 0x33F) */
+};
+
+static struct nx_clkpwr_registerset * const clkpwr =
+	(struct nx_clkpwr_registerset *)PHY_BASEADDR_CLKPWR;
+
+#define	getquotient(v, d)	((v) / (d))
+
+#define	DIV_CPUG0	0
+#define	DIV_BUS		1
+#define	DIV_MEM		2
+#define	DIV_G3D		3
+#define	DIV_CODA	4
+#if defined(CONFIG_ARCH_S5P6818)
+#define	DIV_DISP	5
+#define	DIV_HDMI	6
+#define	DIV_CPUG1	7
+#define	DIV_CCI4	8
+#endif
+
+#define	DVO0		3
+#define	DVO1		9
+#define	DVO2		15
+#define	DVO3		21
+
+static unsigned int pll_rate(unsigned int plln, unsigned int xtal)
+{
+	unsigned int val, val1, nP, nM, nS, nK;
+	unsigned int temp = 0;
+
+	val   = clkpwr->pllsetreg[plln];
+	val1  = clkpwr->pllsetreg_sscg[plln];
+	xtal /= 1000;	/* Unit Khz */
+
+	nP = (val >> 18) & 0x03F;
+	nM = (val >>  8) & 0x3FF;
+	nS = (val >>  0) & 0x0FF;
+	nK = (val1 >> 16) & 0xFFFF;
+
+	if (plln > 1 && nK) {
+		temp = (unsigned int)(getquotient((getquotient((nK * 1000),
+			65536) * xtal), nP) >> nS);
+	}
+
+	temp = (unsigned int)((getquotient((nM * xtal), nP) >> nS) * 1000)
+	       + temp;
+	return temp;
+}
+
+static unsigned int pll_dvo(int dvo)
+{
+	unsigned int val;
+
+	val = (clkpwr->dvoreg[dvo] & 0x7);
+	return val;
+}
+
+static unsigned int pll_div(int dvo)
+{
+	unsigned int val = clkpwr->dvoreg[dvo];
+
+	return  ((((val >> DVO3) & 0x3F) + 1) << 24)  |
+			((((val >> DVO2) & 0x3F) + 1) << 16) |
+			((((val >> DVO1) & 0x3F) + 1) << 8)  |
+			((((val >> DVO0) & 0x3F) + 1) << 0);
+}
+
+#define	PLLN_RATE(n)	 (pll_rate(n, CONFIG_SYS_PLLFIN))	/* 0~ 3 */
+#define	CPU_FCLK_RATE(n) (pll_rate(pll_dvo(n), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(n) >> 0) & 0x3F))
+#define	CPU_BCLK_RATE(n) (pll_rate(pll_dvo(n), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(n) >> 0) & 0x3F) /               \
+			 ((pll_div(n) >> 8) & 0x3F))
+
+#define	MEM_FCLK_RATE()	 (pll_rate(pll_dvo(DIV_MEM), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_MEM) >> 0) & 0x3F) / \
+			 ((pll_div(DIV_MEM) >> 8) & 0x3F))
+
+#define	MEM_DCLK_RATE()	 (pll_rate(pll_dvo(DIV_MEM), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_MEM) >> 0) & 0x3F))
+
+#define	MEM_BCLK_RATE()	 (pll_rate(pll_dvo(DIV_MEM), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_MEM) >> 0) & 0x3F) / \
+			 ((pll_div(DIV_MEM) >> 8) & 0x3F) / \
+			 ((pll_div(DIV_MEM) >> 16) & 0x3F))
+#define	MEM_PCLK_RATE()	 (pll_rate(pll_dvo(DIV_MEM), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_MEM) >> 0) & 0x3F) / \
+			 ((pll_div(DIV_MEM) >> 8) & 0x3F) / \
+			 ((pll_div(DIV_MEM) >> 16) & 0x3F) / \
+			 ((pll_div(DIV_MEM) >> 24) & 0x3F))
+
+#define	BUS_BCLK_RATE()	 (pll_rate(pll_dvo(DIV_BUS), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_BUS) >> 0) & 0x3F))
+#define	BUS_PCLK_RATE()	 (pll_rate(pll_dvo(DIV_BUS), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_BUS) >> 0) & 0x3F) / \
+			 ((pll_div(DIV_BUS) >> 8) & 0x3F))
+
+#define	G3D_BCLK_RATE()	 (pll_rate(pll_dvo(DIV_G3D), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_G3D) >> 0) & 0x3F))
+
+#define	MPG_BCLK_RATE()	 (pll_rate(pll_dvo(DIV_CODA), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_CODA) >> 0) & 0x3F))
+#define	MPG_PCLK_RATE()	 (pll_rate(pll_dvo(DIV_CODA), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_CODA) >> 0) & 0x3F)	/ \
+			 ((pll_div(DIV_CODA) >> 8) & 0x3F))
+
+#if defined(CONFIG_ARCH_S5P6818)
+#define	DISP_BCLK_RATE() (pll_rate(pll_dvo(DIV_DISP), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_DISP) >> 0) & 0x3F))
+#define	DISP_PCLK_RATE() (pll_rate(pll_dvo(DIV_DISP), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_DISP) >> 0) & 0x3F)	/ \
+			 ((pll_div(DIV_DISP) >> 8) & 0x3F))
+
+#define	HDMI_PCLK_RATE() (pll_rate(pll_dvo(DIV_HDMI), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_HDMI) >> 0) & 0x3F))
+
+#define	CCI4_BCLK_RATE() (pll_rate(pll_dvo(DIV_CCI4), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_CCI4) >> 0) & 0x3F))
+#define	CCI4_PCLK_RATE() (pll_rate(pll_dvo(DIV_CCI4), CONFIG_SYS_PLLFIN) / \
+			 ((pll_div(DIV_CCI4) >> 0) & 0x3F)	/ \
+			 ((pll_div(DIV_CCI4) >> 8) & 0x3F))
+#endif
+
+static void core_update_rate(int type)
+{
+	switch (type) {
+	case  0:
+		core_hz.pll[0] = PLLN_RATE(0); break;
+	case  1:
+		core_hz.pll[1] = PLLN_RATE(1); break;
+	case  2:
+		core_hz.pll[2] = PLLN_RATE(2); break;
+	case  3:
+		core_hz.pll[3] = PLLN_RATE(3); break;
+	case  4:
+		core_hz.cpu_fclk = CPU_FCLK_RATE(DIV_CPUG0); break;
+	case  5:
+		core_hz.mem_fclk = MEM_FCLK_RATE(); break;
+	case  6:
+		core_hz.bus_bclk = BUS_BCLK_RATE(); break;
+	case  7:
+		core_hz.bus_pclk = BUS_PCLK_RATE(); break;
+	case  8:
+		core_hz.cpu_bclk = CPU_BCLK_RATE(DIV_CPUG0); break;
+	case  9:
+		core_hz.mem_dclk = MEM_DCLK_RATE(); break;
+	case 10:
+		core_hz.mem_bclk = MEM_BCLK_RATE(); break;
+	case 11:
+		core_hz.mem_pclk = MEM_PCLK_RATE(); break;
+	case 12:
+		core_hz.g3d_bclk = G3D_BCLK_RATE(); break;
+	case 13:
+		core_hz.coda_bclk = MPG_BCLK_RATE(); break;
+	case 14:
+		core_hz.coda_pclk = MPG_PCLK_RATE(); break;
+#if defined(CONFIG_ARCH_S5P6818)
+	case 15:
+		core_hz.disp_bclk = DISP_BCLK_RATE(); break;
+	case 16:
+		core_hz.disp_pclk = DISP_PCLK_RATE(); break;
+	case 17:
+		core_hz.hdmi_pclk = HDMI_PCLK_RATE(); break;
+	case 18:
+		core_hz.cci4_bclk = CCI4_BCLK_RATE(); break;
+	case 19:
+		core_hz.cci4_pclk = CCI4_PCLK_RATE(); break;
+#endif
+	};
+}
+
+static unsigned long core_get_rate(int type)
+{
+	unsigned long rate = 0;
+
+	switch (type) {
+	case  0:
+		rate = core_hz.pll[0];		break;
+	case  1:
+		rate = core_hz.pll[1];		break;
+	case  2:
+		rate = core_hz.pll[2];		break;
+	case  3:
+		rate = core_hz.pll[3];		break;
+	case  4:
+		rate = core_hz.cpu_fclk;	break;
+	case  5:
+		rate = core_hz.mem_fclk;	break;
+	case  6:
+		rate = core_hz.bus_bclk;	break;
+	case  7:
+		rate = core_hz.bus_pclk;	break;
+	case  8:
+		rate = core_hz.cpu_bclk;	break;
+	case  9:
+		rate = core_hz.mem_dclk;	break;
+	case 10:
+		rate = core_hz.mem_bclk;	break;
+	case 11:
+		rate = core_hz.mem_pclk;	break;
+	case 12:
+		rate = core_hz.g3d_bclk;	break;
+	case 13:
+		rate = core_hz.coda_bclk;	break;
+	case 14:
+		rate = core_hz.coda_pclk;	break;
+#if defined(CONFIG_ARCH_S5P6818)
+	case 15:
+		rate = core_hz.disp_bclk;	break;
+	case 16:
+		rate = core_hz.disp_pclk;	break;
+	case 17:
+		rate = core_hz.hdmi_pclk;	break;
+	case 18:
+		rate = core_hz.cci4_bclk;	break;
+	case 19:
+		rate = core_hz.cci4_pclk;	break;
+#endif
+	default:
+		printf("unknown core clock type %d ...\n", type);
+		break;
+	};
+	return rate;
+}
+
+static long core_set_rate(struct clk *clk, long rate)
+{
+	return clk->rate;
+}
+
+static void core_rate_init(void)
+{
+	int i;
+
+	for (i = 0; i < CORE_HZ_SIZE; i++)
+		core_update_rate(i);
+}
+
+/*
+ * Clock Interfaces
+ */
+static inline long clk_divide(long rate, long request,
+			      int align, int *divide)
+{
+	int div = (rate / request);
+	int max = MAX_DIVIDER & ~(align - 1);
+	int adv = (div & ~(align - 1)) + align;
+	long ret;
+
+	if (!div) {
+		if (divide)
+			*divide = 1;
+		return rate;
+	}
+
+	if (div != 1)
+		div &= ~(align - 1);
+
+	if (div != adv && abs(request - rate / div) > abs(request - rate / adv))
+		div = adv;
+
+	div = (div > max ? max : div);
+	if (divide)
+		*divide = div;
+
+	ret = rate / div;
+	return ret;
+}
+
+void clk_put(struct clk *clk)
+{
+}
+
+struct clk *clk_get(const char *id)
+{
+	struct clk_dev *cdev = clk_dev_get(0);
+	struct clk *clk = NULL;
+	const char *str = NULL, *c = NULL;
+	int i, devid;
+
+	if (id)
+		str = id;
+
+	for (i = 0; i < CLK_DEVS_NUM; i++, cdev++) {
+		if (!cdev->name)
+			continue;
+		if (!strncmp(cdev->name, str, strlen(cdev->name))) {
+			c = strrchr((const char *)str, (int)'.');
+			if (!c || !cdev->peri)
+				break;
+		devid = simple_strtoul(++c, NULL, 10);
+		if (cdev->peri->dev_id == devid)
+			break;
+		}
+	}
+	if (i < CLK_DEVS_NUM)
+		clk = &cdev->clk;
+	else
+		clk = &(clk_dev_get(7))->clk;	/* pclk */
+
+	return clk ? clk : ERR_PTR(-ENOENT);
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk_dev *pll = NULL, *cdev = clk_container(clk);
+	struct clk_dev_peri *peri = cdev->peri;
+	unsigned long request = rate, rate_hz = 0;
+	unsigned int mask;
+	int step, div[2] = { 0, };
+	int i, n, clk2 = 0;
+	int start_src = 0, max_src = I_CLOCK_NUM;
+	short s1 = 0, s2 = 0, d1 = 0, d2 = 0;
+
+	if (!peri)
+		return core_set_rate(clk, rate);
+
+	step = peri->clk_step;
+	mask = peri->in_mask;
+	debug("clk: %s.%d request = %ld [input=0x%x]\n", peri->dev_name,
+	      peri->dev_id, rate, mask);
+
+	if (!(I_CLOCK_MASK & mask)) {
+		if (I_PCLK_MASK & mask)
+			return core_get_rate(CORECLK_ID_PCLK);
+		else if (I_BCLK_MASK & mask)
+			return core_get_rate(CORECLK_ID_BCLK);
+		else
+			return clk->rate;
+	}
+
+next:
+	if (peri->in_mask &  I_EXTCLK1_FORCE) {
+		start_src = 4; max_src = 5;
+	}
+	for (n = start_src ; max_src > n; n++) {
+		if (!(((mask & I_CLOCK_MASK) >> n) & 0x1))
+			continue;
+
+		if (n == I_EXT1_BIT) {
+			rate = peri->in_extclk_1;
+		} else if (n == I_EXT2_BIT) {
+			rate = peri->in_extclk_2;
+		} else {
+			pll  = clk_dev_get(n);
+			rate = pll->clk.rate;
+		}
+
+		if (!rate)
+			continue;
+
+		for (i = 0; step > i ; i++)
+			rate = clk_divide(rate, request, 2, &div[i]);
+
+		if (rate_hz && (abs(rate - request) > abs(rate_hz - request)))
+			continue;
+
+		debug("clk: %s.%d, pll.%d[%lu] request[%ld] calc[%ld]\n",
+		      peri->dev_name, peri->dev_id, n, pll->clk.rate,
+		      request, rate);
+
+		if (clk2) {
+			s1 = -1, d1 = -1;	/* not use */
+			s2 =  n, d2 = div[0];
+		} else {
+			s1 = n, d1 = div[0];
+			s2 = I_CLKn_BIT, d2 = div[1];
+		}
+		rate_hz = rate;
+	}
+
+	/* search 2th clock from input */
+	if (!clk2 && abs(rate_hz - request) &&
+	    peri->in_mask1 & ((1 << I_CLOCK_NUM) - 1)) {
+		clk2 = 1;
+		mask = peri->in_mask1;
+		step = 1;
+		goto next;
+	}
+	if (peri->in_mask &  I_EXTCLK1_FORCE) {
+		if (s1 == 0) {
+			s1 = 4; s2 = 7;
+			d1 = 1; d2 = 1;
+		}
+	}
+
+	peri->div_src_0 = s1, peri->div_val_0 = d1;
+	peri->div_src_1 = s2, peri->div_val_1 = d2;
+	clk->rate = rate_hz;
+
+	debug("clk: %s.%d, step[%d] src[%d,%d] %ld", peri->dev_name,
+	      peri->dev_id, peri->clk_step, peri->div_src_0, peri->div_src_1,
+	      rate);
+	debug("/(div0: %d * div1: %d) = %ld, %ld diff (%ld)\n",
+	      peri->div_val_0, peri->div_val_1, rate_hz, request,
+	      abs(rate_hz - request));
+
+	return clk->rate;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	struct clk_dev *cdev = clk_container(clk);
+
+	if (cdev->link)
+		clk = cdev->link;
+	return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk_dev *cdev = clk_container(clk);
+	struct clk_dev_peri *peri = cdev->peri;
+	int i;
+
+	if (!peri)
+		return core_set_rate(clk, rate);
+
+	clk_round_rate(clk, rate);
+
+	for (i = 0; peri->clk_step > i ; i++)	{
+		int s = (i == 0 ? peri->div_src_0 : peri->div_src_1);
+		int d = (i == 0 ? peri->div_val_0 : peri->div_val_1);
+
+		if (-1 == s)
+			continue;
+
+		clk_dev_rate(peri->base, i, s, d);
+
+		debug("clk: %s.%d (%p) set_rate [%d] src[%d] div[%d]\n",
+		      peri->dev_name, peri->dev_id, peri->base, i, s, d);
+	}
+
+	return clk->rate;
+}
+
+int clk_enable(struct clk *clk)
+{
+	struct clk_dev *cdev = clk_container(clk);
+	struct clk_dev_peri *peri = cdev->peri;
+	int i = 0, inv = 0;
+
+	if (!peri)
+		return 0;
+
+	debug("clk: %s.%d enable (BCLK=%s, PCLK=%s)\n", peri->dev_name,
+	      peri->dev_id, I_GATE_BCLK & peri->in_mask ? "ON" : "PASS",
+	      I_GATE_PCLK & peri->in_mask ? "ON" : "PASS");
+
+	if (!(I_CLOCK_MASK & peri->in_mask)) {
+		/* Gated BCLK/PCLK enable */
+		if (I_GATE_BCLK & peri->in_mask)
+			clk_dev_bclk(peri->base, 1);
+
+		if (I_GATE_PCLK & peri->in_mask)
+			clk_dev_pclk(peri->base, 1);
+
+		return 0;
+	}
+
+	/* invert */
+	inv = peri->invert_0;
+	for (; peri->clk_step > i; i++, inv = peri->invert_1)
+		clk_dev_inv(peri->base, i, inv);
+
+	/* Gated BCLK/PCLK enable */
+	if (I_GATE_BCLK & peri->in_mask)
+		clk_dev_bclk(peri->base, 1);
+
+	if (I_GATE_PCLK & peri->in_mask)
+		clk_dev_pclk(peri->base, 1);
+
+	/* restore clock rate */
+	for (i = 0; peri->clk_step > i ; i++)	{
+		int s = (i == 0 ? peri->div_src_0 : peri->div_src_1);
+		int d = (i == 0 ? peri->div_val_0 : peri->div_val_1);
+
+		if (s == -1)
+			continue;
+		clk_dev_rate(peri->base, i, s, d);
+	}
+
+	clk_dev_enb(peri->base, 1);
+
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+	struct clk_dev *cdev = clk_container(clk);
+	struct clk_dev_peri *peri = cdev->peri;
+
+	if (!peri)
+		return;
+
+	debug("clk: %s.%d disable\n", peri->dev_name, peri->dev_id);
+
+	if (!(I_CLOCK_MASK & peri->in_mask)) {
+		/* Gated BCLK/PCLK disable */
+		if (I_GATE_BCLK & peri->in_mask)
+			clk_dev_bclk(peri->base, 0);
+
+		if (I_GATE_PCLK & peri->in_mask)
+			clk_dev_pclk(peri->base, 0);
+
+		return;
+	}
+
+	clk_dev_rate(peri->base, 0, 7, 256);	/* for power save */
+	clk_dev_enb(peri->base, 0);
+
+	/* Gated BCLK/PCLK disable */
+	if (I_GATE_BCLK & peri->in_mask)
+		clk_dev_bclk(peri->base, 0);
+
+	if (I_GATE_PCLK & peri->in_mask)
+		clk_dev_pclk(peri->base, 0);
+}
+
+/*
+ * Core clocks APIs
+ */
+void __init clk_init(void)
+{
+	struct clk_dev *cdev = st_clk_devs;
+	struct clk_dev_peri *peri = clk_periphs;
+	struct clk *clk = NULL;
+	int i = 0;
+
+	memset(cdev, 0, sizeof(st_clk_devs));
+	core_rate_init();
+
+	for (i = 0; (CLK_CORE_NUM + CLK_PERI_NUM) > i; i++, cdev++) {
+		if (i < CLK_CORE_NUM) {
+			cdev->name = clk_core[i];
+			clk = &cdev->clk;
+			clk->rate = core_get_rate(i);
+			continue;
+		}
+
+		peri = &clk_periphs[i - CLK_CORE_NUM];
+		peri->base = (void *)peri->base;
+
+		cdev->peri = peri;
+		cdev->name = peri->dev_name;
+
+		if (!(I_CLOCK_MASK & peri->in_mask)) {
+			if (I_BCLK_MASK & peri->in_mask)
+				cdev->clk.rate = core_get_rate(CORECLK_ID_BCLK);
+			if (I_PCLK_MASK & peri->in_mask)
+				cdev->clk.rate = core_get_rate(CORECLK_ID_PCLK);
+		}
+
+		/* prevent uart clock disable for low step debug message */
+		#ifndef CONFIG_DEBUG_NX_UART
+		if (peri->dev_name) {
+			#ifdef CONFIG_BACKLIGHT_PWM
+			if (!strcmp(peri->dev_name, DEV_NAME_PWM))
+				continue;
+			#endif
+		}
+		#endif
+	}
+	debug("CPU : Clock Generator= %d EA, ", CLK_DEVS_NUM);
+}
diff --git a/roms/u-boot/arch/arm/mach-nexell/config.mk b/roms/u-boot/arch/arm/mach-nexell/config.mk
new file mode 100644
index 000000000..7b0662699
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/config.mk
@@ -0,0 +1,11 @@
+#
+# (C) Copyright 2016 Nexell
+# junghyun kim<jhkim@nexell.co.kr>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+SOCDIR=CPUDIR/$(VENDOR)
+MACHDIR=$(patsubst %,arch/arm/mach-%,$(machine-y))
+
+LDPPFLAGS += -DMACHDIR=$(MACHDIR) -DSOCDIR=$(SOCDIR)
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/boot0.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/boot0.h
new file mode 100644
index 000000000..e05c07ece
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/boot0.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * NSIH (Nexell System Information Header) for FriendlyArm nanopi2 board
+ *
+ * The NSIH (first 512 Bytes of u-boot.bin) is necessary for the
+ * 2nd-Bootloader to get information like load address of U-Boot.
+ *
+ * 0x400 must be added to CONFIG_SYS_TEXT_BASE to have the actual load and
+ * start address because 2nd-Bootloader loads with an offset of 0x400
+ * (NSIH + 0x200 bytes are not loaded into RAM).
+ *
+ * It has been tested / is working with the following 2nd-Bootloader:
+ * "BL1 by Nexell V1.0.0-gd551e13 [Built on 2018-01-25 16:58:29]"
+ *
+ * (C) Copyright 2020 Stefan Bosch <stefan_b@posteo.net>
+ */
+
+#ifndef __BOOT0_H
+#define __BOOT0_H
+
+	ARM_VECTORS
+	.space	0x30
+	.word	(_end - _start) + 20 * 1024	/* 0x50: load size
+						 *       (bin + 20k for DTB) */
+	.space	0x4
+	.word	CONFIG_SYS_TEXT_BASE + 0x400	/* 0x58: load address */
+	.word	0x00000000
+	.word	CONFIG_SYS_TEXT_BASE + 0x400	/* 0x60: start address */
+	.space	0x198
+	.byte	'N'				/* 0x1FC: "NSIH" signature */
+	.byte	'S'
+	.byte	'I'
+	.byte	'H'
+
+	/* The NSIH + 0x200 bytes are omitted by the 2nd-Bootloader */
+	.space	0x200
+_start:
+	ARM_VECTORS
+
+#endif /* __BOOT0_H */
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/clk.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/clk.h
new file mode 100644
index 000000000..cc5589ade
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/clk.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung@nexell.co.kr>
+ */
+
+#ifndef __ASM_ARM_ARCH_CLK_H_
+#define __ASM_ARM_ARCH_CLK_H_
+
+struct clk {
+	unsigned long rate;
+};
+
+void clk_init(void);
+
+struct clk *clk_get(const char *id);
+void clk_put(struct clk *clk);
+unsigned long clk_get_rate(struct clk *clk);
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_rate(struct clk *clk, unsigned long rate);
+int clk_enable(struct clk *clk);
+void clk_disable(struct clk *clk);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/display.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/display.h
new file mode 100644
index 000000000..b0ee91260
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/display.h
@@ -0,0 +1,273 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2016  Nexell Co., Ltd.
+ *
+ * Author: junghyun, kim <jhkim@nexell.co.kr>
+ */
+
+#ifndef _NX__DISPLAY_H_
+#define _NX__DISPLAY_H_
+
+#define	DP_PLANS_NUM	3
+
+/* the display output format. */
+#define	DPC_FORMAT_RGB555		0  /* RGB555 Format */
+#define	DPC_FORMAT_RGB565		1  /* RGB565 Format */
+#define	DPC_FORMAT_RGB666		2  /* RGB666 Format */
+#define	DPC_FORMAT_RGB888		3  /* RGB888 Format */
+#define	DPC_FORMAT_MRGB555A		4  /* MRGB555A Format */
+#define	DPC_FORMAT_MRGB555B		5  /* MRGB555B Format */
+#define	DPC_FORMAT_MRGB565		6  /* MRGB565 Format */
+#define	DPC_FORMAT_MRGB666		7  /* MRGB666 Format */
+#define	DPC_FORMAT_MRGB888A		8  /* MRGB888A Format */
+#define	DPC_FORMAT_MRGB888B		9  /* MRGB888B Format */
+#define	DPC_FORMAT_CCIR656		10 /* ITU-R BT.656 / 601(8-bit) */
+#define	DPC_FORMAT_CCIR601A		12 /* ITU-R BT.601A */
+#define	DPC_FORMAT_CCIR601B		13 /* ITU-R BT.601B */
+#define	DPC_FORMAT_4096COLOR	1  /* 4096 Color Format */
+#define	DPC_FORMAT_16GRAY		3  /* 16 Level Gray Format */
+
+/* layer pixel format. */
+#define	MLC_RGBFMT_R5G6B5		0x44320000	/* {R5,G6,B5 }. */
+#define	MLC_RGBFMT_B5G6R5		0xC4320000  /* {B5,G6,R5 }. */
+#define	MLC_RGBFMT_X1R5G5B5		0x43420000  /* {X1,R5,G5,B5}. */
+#define	MLC_RGBFMT_X1B5G5R5		0xC3420000  /* {X1,B5,G5,R5}. */
+#define	MLC_RGBFMT_X4R4G4B4		0x42110000  /* {X4,R4,G4,B4}. */
+#define	MLC_RGBFMT_X4B4G4R4		0xC2110000	/* {X4,B4,G4,R4}. */
+#define	MLC_RGBFMT_X8R3G3B2		0x41200000	/* {X8,R3,G3,B2}. */
+#define	MLC_RGBFMT_X8B3G3R2		0xC1200000	/* {X8,B3,G3,R2}. */
+#define	MLC_RGBFMT_A1R5G5B5		0x33420000	/* {A1,R5,G5,B5}. */
+#define	MLC_RGBFMT_A1B5G5R5		0xB3420000	/* {A1,B5,G5,R5}. */
+#define	MLC_RGBFMT_A4R4G4B4		0x22110000	/* {A4,R4,G4,B4}. */
+#define	MLC_RGBFMT_A4B4G4R4		0xA2110000	/* {A4,B4,G4,R4}. */
+#define	MLC_RGBFMT_A8R3G3B2		0x11200000	/* {A8,R3,G3,B2}. */
+#define	MLC_RGBFMT_A8B3G3R2		0x91200000	/* {A8,B3,G3,R2}. */
+#define	MLC_RGBFMT_R8G8B8		0x46530000	/* {R8,G8,B8 }. */
+#define	MLC_RGBFMT_B8G8R8		0xC6530000	/* {B8,G8,R8 }. */
+#define	MLC_RGBFMT_X8R8G8B8		0x46530000	/* {X8,R8,G8,B8}. */
+#define	MLC_RGBFMT_X8B8G8R8		0xC6530000	/* {X8,B8,G8,R8}. */
+#define	MLC_RGBFMT_A8R8G8B8		0x06530000	/* {A8,R8,G8,B8}. */
+#define	MLC_RGBFMT_A8B8G8R8		0x86530000	/* {A8,B8,G8,R8}.  */
+
+/* the data output order in case of ITU-R BT.656 / 601. */
+#define	DPC_YCORDER_CBYCRY		0
+#define	DPC_YCORDER_CRYCBY		1
+#define	DPC_YCORDER_YCBYCR		2
+#define	DPC_YCORDER_YCRYCB		3
+
+/* the PAD output clock. */
+#define	DPC_PADCLKSEL_VCLK		0	/* VCLK */
+#define	DPC_PADCLKSEL_VCLK2		1	/* VCLK2 */
+
+/* display sync info for DPC */
+struct dp_sync_info {
+	int interlace;
+	int h_active_len;
+	int h_sync_width;
+	int h_back_porch;
+	int h_front_porch;
+	int h_sync_invert;	/* default active low */
+	int v_active_len;
+	int v_sync_width;
+	int v_back_porch;
+	int v_front_porch;
+	int v_sync_invert;	/* default active low */
+	int pixel_clock_hz;	/* HZ */
+};
+
+/* syncgen control (DPC) */
+#define	DP_SYNC_DELAY_RGB_PVD		(1 << 0)
+#define	DP_SYNC_DELAY_HSYNC_CP1		(1 << 1)
+#define	DP_SYNC_DELAY_VSYNC_FRAM	(1 << 2)
+#define	DP_SYNC_DELAY_DE_CP			(1 << 3)
+
+struct dp_ctrl_info {
+	/* clock gen */
+	int clk_src_lv0;
+	int clk_div_lv0;
+	int clk_src_lv1;
+	int clk_div_lv1;
+	/* scan format */
+	int interlace;
+	/* syncgen format */
+	unsigned int out_format;
+	int invert_field;	/* 0:normal(Low odd), 1:invert (low even) */
+	int swap_RB;
+	unsigned int yc_order;	/* for CCIR output */
+	/* extern sync delay */
+	int delay_mask;		/* if 0, set defalut delays */
+	int d_rgb_pvd;		/* delay for RGB/PVD, 0~16, default  0 */
+	int d_hsync_cp1;	/* delay for HSYNC/CP1, 0~63, default 12 */
+	int d_vsync_fram;	/* delay for VSYNC/FRAM, 0~63, default 12 */
+	int d_de_cp2;		/* delay for DE/CP2, 0~63, default 12 */
+	/* sync offset */
+	int vs_start_offset;	/* start vsync offset, defatult 0 */
+	int vs_end_offset;	/* end vsync offset, default 0 */
+	int ev_start_offset;	/* start even vsync offset, default 0 */
+	int ev_end_offset;	/* end even vsync offset , default 0 */
+	/* pad clock seletor */
+	int vck_select;		/* 0=vclk0, 1=vclk2 */
+	int clk_inv_lv0;	/* OUTCLKINVn */
+	int clk_delay_lv0;	/* OUTCLKDELAYn */
+	int clk_inv_lv1;	/* OUTCLKINVn */
+	int clk_delay_lv1;	/* OUTCLKDELAYn */
+	int clk_sel_div1;	/* 0=clk1_inv, 1=clk1_div_2_ns */
+};
+
+/* multi layer control (MLC) */
+struct dp_plane_top {
+	int screen_width;
+	int screen_height;
+	int video_prior;	/* 0: video>RGBn, 1: RGB0>video>RGB1,
+				 *                2: RGB0 > RGB1 > video .. */
+	int interlace;
+	int plane_num;
+	unsigned int back_color;
+};
+
+struct dp_plane_info {
+	int layer;
+	unsigned int fb_base;
+	int left;
+	int top;
+	int width;
+	int height;
+	int pixel_byte;
+	unsigned int format;
+	int alpha_on;
+	int alpha_depth;
+	int tp_on;			/* transparency color enable */
+	unsigned int tp_color;
+	unsigned int mem_lock_size;	/* memory burst access (4,8,16) */
+	int video_layer;
+	int enable;
+};
+
+/*
+ * LCD device dependency struct
+ * RGB, LVDS, MiPi, HDMI
+ */
+enum {
+	DP_DEVICE_RESCONV = 0,
+	DP_DEVICE_RGBLCD = 1,
+	DP_DEVICE_HDMI = 2,
+	DP_DEVICE_MIPI = 3,
+	DP_DEVICE_LVDS = 4,
+	DP_DEVICE_CVBS = 5,
+	DP_DEVICE_DP0 = 6,
+	DP_DEVICE_DP1 = 7,
+	DP_DEVICE_END,
+};
+
+enum {
+	DP_CLOCK_RESCONV = 0,
+	DP_CLOCK_LCDIF = 1,
+	DP_CLOCK_MIPI = 2,
+	DP_CLOCK_LVDS = 3,
+	DP_CLOCK_HDMI = 4,
+	DP_CLOCK_END,
+};
+
+enum dp_lvds_format {
+	DP_LVDS_FORMAT_VESA = 0,
+	DP_LVDS_FORMAT_JEIDA = 1,
+	DP_LVDS_FORMAT_LOC = 2,
+};
+
+#define	DEF_VOLTAGE_LEVEL	(0x20)
+
+struct dp_lvds_dev {
+	enum dp_lvds_format lvds_format; /* 0:VESA, 1:JEIDA, 2: Location */
+	int pol_inv_hs;		/* hsync polarity invert for VESA, JEIDA */
+	int pol_inv_vs;		/* bsync polarity invert for VESA, JEIDA */
+	int pol_inv_de;		/* de polarity invert for VESA, JEIDA */
+	int pol_inv_ck;		/* input clock(pixel clock) polarity invert */
+	int voltage_level;
+	/* Location setting */
+	unsigned int loc_map[9];	/* Location Setting */
+	unsigned int loc_mask[2];	/* Location Setting, 0 ~ 34 */
+	unsigned int loc_pol[2];	/* Location Setting, 0 ~ 34 */
+};
+
+#include "mipi_display.h"
+
+struct dp_mipi_dev {
+	int lp_bitrate;	/* to lcd setup, low power bitrate (150, 100, 80 Mhz) */
+	int hs_bitrate; /* to lcd data, high speed bitrate (1000, ... Mhz) */
+	int lpm_trans;
+	int command_mode;
+	unsigned int hs_pllpms;
+	unsigned int hs_bandctl;
+	unsigned int lp_pllpms;
+	unsigned int lp_bandctl;
+	struct mipi_dsi_device dsi;
+};
+
+struct dp_rgb_dev {
+	int lcd_mpu_type;
+};
+
+struct dp_hdmi_dev {
+	int preset;
+};
+
+/* platform data for the driver model */
+struct nx_display_plat {
+	int module;
+	struct dp_sync_info sync;
+	struct dp_ctrl_info ctrl;
+	struct dp_plane_top top;
+	struct dp_plane_info plane[DP_PLANS_NUM];
+	int dev_type;
+	void *device;
+};
+
+/* Lcd api */
+void nx_lvds_display(int module,
+		     struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+		     struct dp_plane_top *top,
+		     struct dp_plane_info *planes,
+		     struct dp_lvds_dev *dev);
+
+void nx_rgb_display(int module,
+		    struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+		    struct dp_plane_top *top, struct dp_plane_info *planes,
+		    struct dp_rgb_dev *dev);
+
+void nx_hdmi_display(int module,
+		     struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+		     struct dp_plane_top *top,
+		     struct dp_plane_info *planes,
+		     struct dp_hdmi_dev *dev);
+
+void nx_mipi_display(int module,
+		     struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+		     struct dp_plane_top *top,
+		     struct dp_plane_info *planes,
+		     struct dp_mipi_dev *dev);
+
+int nx_mipi_dsi_lcd_bind(struct mipi_dsi_device *dsi);
+
+/* disaply api */
+void dp_control_init(int module);
+int  dp_control_setup(int module, struct dp_sync_info *sync,
+		      struct dp_ctrl_info *ctrl);
+void dp_control_enable(int module, int on);
+
+void dp_plane_init(int module);
+int  dp_plane_screen_setup(int module, struct dp_plane_top *top);
+void dp_plane_screen_enable(int module, int on);
+
+int  dp_plane_layer_setup(int module, struct dp_plane_info *plane);
+void dp_plane_layer_enable(int module, struct dp_plane_info *plane, int on);
+
+int dp_plane_set_enable(int module, int layer, int on);
+int dp_plane_set_address(int module, int layer, unsigned int address);
+int dp_plane_wait_vsync(int module, int layer, int fps);
+
+#if defined CONFIG_SPL_BUILD ||	\
+	(!defined(CONFIG_DM) && !defined(CONFIG_OF_CONTROL))
+int nx_display_probe(struct nx_display_plat *plat);
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/display_dev.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/display_dev.h
new file mode 100644
index 000000000..77eb61476
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/display_dev.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2016  Nexell Co., Ltd.
+ *
+ * Author: junghyun, kim <jhkim@nexell.co.kr>
+ */
+
+#ifndef _NX__DISPLAY_DEV_H_
+#define _NX__DISPLAY_DEV_H_
+
+#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO
+#include <video_fb.h>
+#elif defined CONFIG_LCD
+#include <lcd.h>
+#endif
+
+struct nx_display_dev {
+#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO
+	GraphicDevice graphic_device;
+#elif defined CONFIG_LCD
+	vidinfo_t *panel_info;
+#endif
+	unsigned long base;
+	int module;
+	struct dp_sync_info sync;
+	struct dp_ctrl_info ctrl;
+	struct dp_plane_top top;
+	struct dp_plane_info planes[DP_PLANS_NUM];
+	int dev_type;
+	void *device;
+	struct dp_plane_info *fb_plane;
+	unsigned int depth;	/* byte per pixel */
+	unsigned int fb_addr;
+	unsigned int fb_size;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/ehci.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/ehci.h
new file mode 100644
index 000000000..545153b14
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/ehci.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * NEXELL USB HOST EHCI Controller
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung@nexell.co.kr>
+ */
+
+#ifndef __ASM_ARM_ARCH_EHCI_H__
+#define __ASM_ARM_ARCH_EHCI_H__
+
+/* Nexell USBHOST PHY registers */
+
+/* USBHOST Configuration 0 Register */
+#define NX_HOST_CON0				0x14
+#define NX_HOST_CON0_SS_WORD_IF			BIT(26)
+#define NX_HOST_CON0_SS_WORD_IF_ENB		BIT(25)
+#define NX_HOST_CON0_SS_WORD_IF_16 ( \
+	NX_HOST_CON0_SS_WORD_IF | \
+	NX_HOST_CON0_SS_WORD_IF_ENB)
+
+#define NX_HOST_CON0_HSIC_480M_FROM_OTG_PHY	BIT(24)
+#define NX_HOST_CON0_HSIC_FREE_CLOCK_ENB	BIT(23)
+#define NX_HOST_CON0_HSIC_CLK_MASK		(0x3 << 23)
+
+#define NX_HOST_CON0_N_HOST_HSIC_RESET_SYNC	BIT(22)
+#define NX_HOST_CON0_N_HOST_UTMI_RESET_SYNC	BIT(21)
+#define NX_HOST_CON0_N_HOST_PHY_RESET_SYNC	BIT(20)
+#define NX_HOST_CON0_UTMI_RESET_SYNC ( \
+	NX_HOST_CON0_N_HOST_HSIC_RESET_SYNC | \
+	NX_HOST_CON0_N_HOST_UTMI_RESET_SYNC | \
+	NX_HOST_CON0_N_HOST_PHY_RESET_SYNC)
+
+#define NX_HOST_CON0_N_AUXWELL_RESET_SYNC	BIT(19)
+#define NX_HOST_CON0_N_OHCI_RESET_SYNC		BIT(18)
+#define NX_HOST_CON0_N_RESET_SYNC		BIT(17)
+#define NX_HOST_CON0_AHB_RESET_SYNC ( \
+	NX_HOST_CON0_N_AUXWELL_RESET_SYNC | \
+	NX_HOST_CON0_N_OHCI_RESET_SYNC | \
+	NX_HOST_CON0_N_RESET_SYNC)
+
+#define NX_HOST_CON0_HSIC_EN_PORT1		(0x2 << 14)
+#define NX_HOST_CON0_HSIC_EN_MASK		(0x7 << 14)
+
+/* USBHOST Configuration 1 Register */
+#define NX_HOST_CON1				0x18
+
+/* USBHOST Configuration 2 Register */
+#define NX_HOST_CON2				0x1C
+#define NX_HOST_CON2_SS_ENA_INCRX_ALIGN		(0x1 << 28)
+#define NX_HOST_CON2_SS_ENA_INCR4		(0x1 << 27)
+#define NX_HOST_CON2_SS_ENA_INCR8		(0x1 << 26)
+#define NX_HOST_CON2_SS_ENA_INCR16		(0x1 << 25)
+#define NX_HOST_CON2_SS_DMA_BURST_MASK  \
+	(NX_HOST_CON2_SS_ENA_INCR16 | NX_HOST_CON2_SS_ENA_INCR8 | \
+	 NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_EHCI_SS_ENABLE_DMA_BURST \
+	(NX_HOST_CON2_SS_ENA_INCR16 | NX_HOST_CON2_SS_ENA_INCR8 | \
+	 NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_OHCI_SS_ENABLE_DMA_BURST \
+	(NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_SS_FLADJ_VAL_0_OFFSET	(21)
+#define NX_HOST_CON2_SS_FLADJ_VAL_OFFSET	(3)
+#define NX_HOST_CON2_SS_FLADJ_VAL_NUM		(6)
+#define NX_HOST_CON2_SS_FLADJ_VAL_0_SEL		BIT(5)
+#define NX_HOST_CON2_SS_FLADJ_VAL_MAX		0x7
+
+/* USBHOST Configuration 3 Register */
+#define NX_HOST_CON3				0x20
+#define NX_HOST_CON3_POR			BIT(8)
+#define NX_HOST_CON3_POR_ENB			BIT(7)
+#define NX_HOST_CON3_POR_MASK			(0x3 << 7)
+
+/* USBHOST Configuration 4 Register */
+#define NX_HOST_CON4				0x24
+#define NX_HOST_CON4_WORDINTERFACE		BIT(9)
+#define NX_HOST_CON4_WORDINTERFACE_ENB		BIT(8)
+#define NX_HOST_CON4_WORDINTERFACE_16 ( \
+	NX_HOST_CON4_WORDINTERFACE | \
+	NX_HOST_CON4_WORDINTERFACE_ENB)
+
+/* USBHOST Configuration 5 Register */
+#define NX_HOST_CON5				0x28
+#define NX_HOST_CON5_HSIC_POR			BIT(19)
+#define NX_HOST_CON5_HSIC_POR_ENB		BIT(18)
+#define NX_HOST_CON5_HSIC_POR_MASK		(0x3 << 18)
+
+/* USBHOST Configuration 6 Register */
+#define NX_HOST_CON6				0x2C
+#define NX_HOST_CON6_HSIC_WORDINTERFACE		BIT(13)
+#define NX_HOST_CON6_HSIC_WORDINTERFACE_ENB	BIT(12)
+#define NX_HOST_CON6_HSIC_WORDINTERFACE_16 ( \
+	NX_HOST_CON6_HSIC_WORDINTERFACE | \
+	NX_HOST_CON6_HSIC_WORDINTERFACE_ENB)
+
+/* Register map for PHY control */
+struct nx_usb_phy {
+	unsigned int reserved;
+	unsigned int others[4];
+	unsigned int usbhost_con[7];
+};
+
+#endif /* __ASM_ARM_ARCH_EHCI_H__ */
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/gpio.h
new file mode 100644
index 000000000..7167d3cf5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/gpio.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * DeokJin, Lee <truevirtue@nexell.co.kr>
+ */
+
+#ifndef __ASM_ARCH_NEXELL_GPIO_H
+#define __ASM_ARCH_NEXELL_GPIO_H
+
+#include <asm/io.h>
+#include <linux/errno.h>
+
+#define PIN_BASE		0
+
+#define MAX_GPIO_BANKS		5
+
+#endif /* __ASM_ARCH_NEXELL_GPIO_H */
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/mipi_display.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/mipi_display.h
new file mode 100644
index 000000000..f3fdec646
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/mipi_display.h
@@ -0,0 +1,215 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Defines for Mobile Industry Processor Interface (MIPI(R))
+ * Display Working Group standards: DSI, DCS, DBI, DPI
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+
+#ifndef MIPI_DISPLAY_H
+#define MIPI_DISPLAY_H
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum {
+	MIPI_DSI_V_SYNC_START				= 0x01,
+	MIPI_DSI_V_SYNC_END				= 0x11,
+	MIPI_DSI_H_SYNC_START				= 0x21,
+	MIPI_DSI_H_SYNC_END				= 0x31,
+
+	MIPI_DSI_COLOR_MODE_OFF				= 0x02,
+	MIPI_DSI_COLOR_MODE_ON				= 0x12,
+	MIPI_DSI_SHUTDOWN_PERIPHERAL			= 0x22,
+	MIPI_DSI_TURN_ON_PERIPHERAL			= 0x32,
+
+	MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM		= 0x03,
+	MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM		= 0x13,
+	MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM		= 0x23,
+
+	MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM		= 0x04,
+	MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM		= 0x14,
+	MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM		= 0x24,
+
+	MIPI_DSI_DCS_SHORT_WRITE			= 0x05,
+	MIPI_DSI_DCS_SHORT_WRITE_PARAM			= 0x15,
+
+	MIPI_DSI_DCS_READ				= 0x06,
+
+	MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE		= 0x37,
+
+	MIPI_DSI_END_OF_TRANSMISSION			= 0x08,
+
+	MIPI_DSI_NULL_PACKET				= 0x09,
+	MIPI_DSI_BLANKING_PACKET			= 0x19,
+	MIPI_DSI_GENERIC_LONG_WRITE			= 0x29,
+	MIPI_DSI_DCS_LONG_WRITE				= 0x39,
+
+	MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20	= 0x0c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24		= 0x1c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16		= 0x2c,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_30			= 0x0d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_36			= 0x1d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12		= 0x3d,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_16			= 0x0e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_18			= 0x1e,
+	MIPI_DSI_PIXEL_STREAM_3BYTE_18			= 0x2e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_24			= 0x3e,
+};
+
+/* MIPI DSI Peripheral-to-Processor transaction types */
+enum {
+	MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT	= 0x02,
+	MIPI_DSI_RX_END_OF_TRANSMISSION			= 0x08,
+	MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE	= 0x11,
+	MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE	= 0x12,
+	MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE		= 0x1a,
+	MIPI_DSI_RX_DCS_LONG_READ_RESPONSE		= 0x1c,
+	MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE	= 0x21,
+	MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE	= 0x22,
+};
+
+/* MIPI DCS commands */
+enum {
+	MIPI_DCS_NOP			= 0x00,
+	MIPI_DCS_SOFT_RESET		= 0x01,
+	MIPI_DCS_GET_DISPLAY_ID		= 0x04,
+	MIPI_DCS_GET_RED_CHANNEL	= 0x06,
+	MIPI_DCS_GET_GREEN_CHANNEL	= 0x07,
+	MIPI_DCS_GET_BLUE_CHANNEL	= 0x08,
+	MIPI_DCS_GET_DISPLAY_STATUS	= 0x09,
+	MIPI_DCS_GET_POWER_MODE		= 0x0A,
+	MIPI_DCS_GET_ADDRESS_MODE	= 0x0B,
+	MIPI_DCS_GET_PIXEL_FORMAT	= 0x0C,
+	MIPI_DCS_GET_DISPLAY_MODE	= 0x0D,
+	MIPI_DCS_GET_SIGNAL_MODE	= 0x0E,
+	MIPI_DCS_GET_DIAGNOSTIC_RESULT	= 0x0F,
+	MIPI_DCS_ENTER_SLEEP_MODE	= 0x10,
+	MIPI_DCS_EXIT_SLEEP_MODE	= 0x11,
+	MIPI_DCS_ENTER_PARTIAL_MODE	= 0x12,
+	MIPI_DCS_ENTER_NORMAL_MODE	= 0x13,
+	MIPI_DCS_EXIT_INVERT_MODE	= 0x20,
+	MIPI_DCS_ENTER_INVERT_MODE	= 0x21,
+	MIPI_DCS_SET_GAMMA_CURVE	= 0x26,
+	MIPI_DCS_SET_DISPLAY_OFF	= 0x28,
+	MIPI_DCS_SET_DISPLAY_ON		= 0x29,
+	MIPI_DCS_SET_COLUMN_ADDRESS	= 0x2A,
+	MIPI_DCS_SET_PAGE_ADDRESS	= 0x2B,
+	MIPI_DCS_WRITE_MEMORY_START	= 0x2C,
+	MIPI_DCS_WRITE_LUT		= 0x2D,
+	MIPI_DCS_READ_MEMORY_START	= 0x2E,
+	MIPI_DCS_SET_PARTIAL_AREA	= 0x30,
+	MIPI_DCS_SET_SCROLL_AREA	= 0x33,
+	MIPI_DCS_SET_TEAR_OFF		= 0x34,
+	MIPI_DCS_SET_TEAR_ON		= 0x35,
+	MIPI_DCS_SET_ADDRESS_MODE	= 0x36,
+	MIPI_DCS_SET_SCROLL_START	= 0x37,
+	MIPI_DCS_EXIT_IDLE_MODE		= 0x38,
+	MIPI_DCS_ENTER_IDLE_MODE	= 0x39,
+	MIPI_DCS_SET_PIXEL_FORMAT	= 0x3A,
+	MIPI_DCS_WRITE_MEMORY_CONTINUE	= 0x3C,
+	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
+	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
+	MIPI_DCS_GET_SCANLINE		= 0x45,
+	MIPI_DCS_READ_DDB_START		= 0xA1,
+	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+};
+
+/* MIPI DCS pixel formats */
+#define MIPI_DCS_PIXEL_FMT_24BIT	7
+#define MIPI_DCS_PIXEL_FMT_18BIT	6
+#define MIPI_DCS_PIXEL_FMT_16BIT	5
+#define MIPI_DCS_PIXEL_FMT_12BIT	3
+#define MIPI_DCS_PIXEL_FMT_8BIT		2
+#define MIPI_DCS_PIXEL_FMT_3BIT		1
+
+/* request ACK from peripheral */
+#define MIPI_DSI_MSG_REQ_ACK    BIT(0)
+/* use Low Power Mode to transmit message */
+#define MIPI_DSI_MSG_USE_LPM    BIT(1)
+
+/**
+ * struct mipi_dsi_msg - read/write DSI buffer
+ * @channel: virtual channel id
+ * @type: payload data type
+ * @flags: flags controlling this message transmission
+ * @tx_len: length of @tx_buf
+ * @tx_buf: data to be written
+ * @rx_len: length of @rx_buf
+ * @rx_buf: data to be read, or NULL
+ */
+struct mipi_dsi_msg {
+	u8 channel;	/* virtual channel id */
+	u8 type;	/* payload data type */
+	u16 flags;	/* flags controlling this message transmission */
+	size_t tx_len;
+	const void *tx_buf;
+	size_t rx_len;
+	void *rx_buf;
+};
+
+/* DSI mode flags */
+
+/* video mode */
+#define MIPI_DSI_MODE_VIDEO             BIT(0)
+/* video burst mode */
+#define MIPI_DSI_MODE_VIDEO_BURST       BIT(1)
+/* video pulse mode */
+#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE  BIT(2)
+/* enable auto vertical count mode */
+#define MIPI_DSI_MODE_VIDEO_AUTO_VERT   BIT(3)
+/* enable hsync-end packets in vsync-pulse and v-porch area */
+#define MIPI_DSI_MODE_VIDEO_HSE         BIT(4)
+/* disable hfront-porch area */
+#define MIPI_DSI_MODE_VIDEO_HFP         BIT(5)
+/* disable hback-porch area */
+#define MIPI_DSI_MODE_VIDEO_HBP         BIT(6)
+/* disable hsync-active area */
+#define MIPI_DSI_MODE_VIDEO_HSA         BIT(7)
+/* flush display FIFO on vsync pulse */
+#define MIPI_DSI_MODE_VSYNC_FLUSH       BIT(8)
+/* disable EoT packets in HS mode */
+#define MIPI_DSI_MODE_EOT_PACKET        BIT(9)
+/* device supports non-continuous clock behavior (DSI spec 5.6.1) */
+#define MIPI_DSI_CLOCK_NON_CONTINUOUS   BIT(10)
+/* transmit data in low power */
+#define MIPI_DSI_MODE_LPM               BIT(11) /* DSI mode flags */
+
+enum mipi_dsi_pixel_format {
+	MIPI_DSI_FMT_RGB888,
+	MIPI_DSI_FMT_RGB666,
+	MIPI_DSI_FMT_RGB666_PACKED,
+	MIPI_DSI_FMT_RGB565,
+};
+
+/**
+ * struct mipi_dsi_device - DSI peripheral device
+ * @host: DSI host for this peripheral
+ * @dev: driver model device node for this peripheral
+ * @channel: virtual channel assigned to the peripheral
+ * @format: pixel format for video mode
+ * @lanes: number of active data lanes
+ * @mode_flags: DSI operation mode related flags
+ */
+struct mipi_dsi_device {
+	unsigned int channel;
+	unsigned int lanes;
+	enum mipi_dsi_pixel_format format;
+	unsigned long mode_flags;
+	struct mipi_panel_ops *ops;
+	ssize_t (*write_buffer)(struct mipi_dsi_device *dsi,
+				const void *data, size_t len);
+};
+
+struct mipi_panel_ops {
+	int (*init)(struct mipi_dsi_device *dsi, int width, int height);
+	int (*prepare)(struct mipi_dsi_device *dsi);
+	int (*unprepare)(struct mipi_dsi_device *dsi);
+	int (*enable)(struct mipi_dsi_device *dsi);
+	int (*disable)(struct mipi_dsi_device *dsi);
+	void *private_data;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/nexell.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/nexell.h
new file mode 100644
index 000000000..e42805fa0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/nexell.h
@@ -0,0 +1,352 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung@nexell.co.kr>
+ */
+
+#ifndef __NEXELL_H__
+#define __NEXELL_H__
+
+#define PHY_BASEADDR_DMA0		(0xC0000000)
+#define PHY_BASEADDR_DMA1		(0xC0001000)
+#if defined(CONFIG_ARCH_S5P4418)
+#define PHY_BASEADDR_INTC0		(0xC0002000)
+#define PHY_BASEADDR_INTC1		(0xC0003000)
+#elif defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_INTC		(0xC0008000)
+#endif
+#define PHY_BASEADDR_CLKPWR		(0xC0010000)
+#define PHY_BASEADDR_RTC		(0xC0010C00)
+#define PHY_BASEADDR_ALIVE		(0xC0010800)
+#define PHY_BASEADDR_RSTCON		(0xC0012000)
+#define PHY_BASEADDR_TIEOFF		(0xC0011000)
+#define PHY_BASEADDR_PDM		(0xC0014000)
+#define PHY_BASEADDR_CRYPTO		(0xC0015000)
+#define PHY_BASEADDR_TIMER		(0xC0017000)
+#define PHY_BASEADDR_PWM		(0xC0018000)
+#define PHY_BASEADDR_WDT		(0xC0019000)
+#define PHY_BASEADDR_GPIOA		(0xC001A000)
+#define PHY_BASEADDR_GPIOB		(0xC001B000)
+#define PHY_BASEADDR_GPIOC		(0xC001C000)
+#define PHY_BASEADDR_GPIOD		(0xC001D000)
+#define PHY_BASEADDR_GPIOE		(0xC001E000)
+#define PHY_BASEADDR_OHCI		(0xC0020000)
+#define PHY_BASEADDR_EHCI		(0xC0030000)
+#define PHY_BASEADDR_HSOTG		(0xC0040000)
+#define PHY_BASEADDR_ADC		(0xC0053000)
+#define PHY_BASEADDR_PPM		(0xC0054000)
+#define PHY_BASEADDR_I2S0		(0xC0055000)
+#define PHY_BASEADDR_I2S1		(0xC0056000)
+#define PHY_BASEADDR_I2S2		(0xC0057000)
+#define PHY_BASEADDR_AC97		(0xC0058000)
+#define PHY_BASEADDR_SPDIF_TX		(0xC0059000)
+#define PHY_BASEADDR_SPDIF_RX		(0xC005A000)
+#define PHY_BASEADDR_SSP0		(0xC005B000)
+#define PHY_BASEADDR_SSP1		(0xC005C000)
+#define PHY_BASEADDR_SSP2		(0xC005F000)
+#define PHY_BASEADDR_MPEGTSI		(0xC005D000)
+#define PHY_BASEADDR_GMAC		(0xC0060000)
+#define PHY_BASEADDR_VIP0		(0xC0063000)
+#define PHY_BASEADDR_VIP1		(0xC0064000)
+#if defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_VIP2		(0xC0099000)
+#endif
+#define PHY_BASEADDR_DEINTERLACE	(0xC0065000)
+#define PHY_BASEADDR_SCALER		(0xC0066000)
+#define PHY_BASEADDR_ECID		(0xC0067000)
+#define PHY_BASEADDR_SDMMC0		(0xC0062000)
+#define PHY_BASEADDR_SDMMC1		(0xC0068000)
+#define PHY_BASEADDR_SDMMC2		(0xC0069000)
+#define PHY_BASEADDR_MALI400		(0xC0070000)
+#define PHY_BASEADDR_CODA_APB0		(0xC0080000)
+#define PHY_BASEADDR_CODA_APB1		(0xC0081000)
+#define PHY_BASEADDR_CODA_APB2		(0xC0082000)
+#define PHY_BASEADDR_CODA_APB3		(0xC0083000)
+/* dma (O), modem(X), UART0_MODULE */
+#define PHY_BASEADDR_UART0		(0xC00A1000)
+/* dma (O), modem(O), pl01115_Uart_modem_MODULE */
+#define PHY_BASEADDR_UART1		(0xC00A0000)
+/* dma (O), modem(X), UART1_MODULE */
+#define PHY_BASEADDR_UART2		(0xC00A2000)
+/* dma (X), modem(X), pl01115_Uart_nodma0_MODULE */
+#define PHY_BASEADDR_UART3		(0xC00A3000)
+/* dma (X), modem(X), pl01115_Uart_nodma1_MODULE */
+#define PHY_BASEADDR_UART4		(0xC006D000)
+/* dma (X), modem(X), pl01115_Uart_nodma2_MODULE */
+#define PHY_BASEADDR_UART5		(0xC006F000)
+#define PHY_BASEADDR_I2C0		(0xC00A4000)
+#define PHY_BASEADDR_I2C1		(0xC00A5000)
+#define PHY_BASEADDR_I2C2		(0xC00A6000)
+#define PHY_BASEADDR_CAN0		(0xC00CE000)
+#define PHY_BASEADDR_CAN1		(0xC00CF000)
+#define PHY_BASEADDR_MIPI		(0xC00D0000)
+#define PHY_BASEADDR_DISPLAYTOP		(0xC0100000)
+
+#define PHY_BASEADDR_CLKGEN0		(0xC00BB000)	/* TIMER_1 */
+#define PHY_BASEADDR_CLKGEN1		(0xC00BC000)	/* TIMER_2 */
+#define PHY_BASEADDR_CLKGEN2		(0xC00BD000)	/* TIMER_3 */
+#define PHY_BASEADDR_CLKGEN3		(0xC00BE000)	/* PWM_1 */
+#define PHY_BASEADDR_CLKGEN4		(0xC00BF000)	/* PWM_2 */
+#define PHY_BASEADDR_CLKGEN5		(0xC00C0000)	/* PWM_3 */
+#define PHY_BASEADDR_CLKGEN6		(0xC00AE000)	/* I2C_0 */
+#define PHY_BASEADDR_CLKGEN7		(0xC00AF000)	/* I2C_1 */
+#define PHY_BASEADDR_CLKGEN8		(0xC00B0000)	/* I2C_2 */
+#define PHY_BASEADDR_CLKGEN9		(0xC00CA000)	/* MIPI */
+#define PHY_BASEADDR_CLKGEN10		(0xC00C8000)	/* GMAC */
+#define PHY_BASEADDR_CLKGEN11		(0xC00B8000)	/* SPDIF_TX */
+#define PHY_BASEADDR_CLKGEN12		(0xC00B7000)	/* MPEGTSI */
+#define PHY_BASEADDR_CLKGEN13		(0xC00BA000)	/* PWM_0 */
+#define PHY_BASEADDR_CLKGEN14		(0xC00B9000)	/* TIMER_0 */
+#define PHY_BASEADDR_CLKGEN15		(0xC00B2000)	/* I2S_0 */
+#define PHY_BASEADDR_CLKGEN16		(0xC00B3000)	/* I2S_1 */
+#define PHY_BASEADDR_CLKGEN17		(0xC00B4000)	/* I2S_2 */
+#define PHY_BASEADDR_CLKGEN18		(0xC00C5000)	/* SDHC_0 */
+#define PHY_BASEADDR_CLKGEN19		(0xC00CC000)	/* SDHC_1 */
+#define PHY_BASEADDR_CLKGEN20		(0xC00CD000)	/* SDHC_2 */
+#define PHY_BASEADDR_CLKGEN21		(0xC00C3000)	/* MALI */
+#define PHY_BASEADDR_CLKGEN22		(0xC00A9000)	/* UART_0 */
+#define PHY_BASEADDR_CLKGEN23		(0xC00AA000)	/* UART_2 */
+#define PHY_BASEADDR_CLKGEN24		(0xC00A8000)	/* UART_1 */
+#define PHY_BASEADDR_CLKGEN25		(0xC00AB000)	/* UART_3 */
+#define PHY_BASEADDR_CLKGEN26		(0xC006E000)	/* UART_4 */
+#define PHY_BASEADDR_CLKGEN27		(0xC00B1000)	/* UART_5 */
+#define PHY_BASEADDR_CLKGEN28		(0xC00B5000)	/* DEINTERLACE */
+#define PHY_BASEADDR_CLKGEN29		(0xC00C4000)	/* PPM */
+#define PHY_BASEADDR_CLKGEN30		(0xC00C1000)	/* VIP_0 */
+#define PHY_BASEADDR_CLKGEN31		(0xC00C2000)	/* VIP_1 */
+#define PHY_BASEADDR_CLKGEN32		(0xC006B000)	/* USB2HOST */
+#define PHY_BASEADDR_CLKGEN33		(0xC00C7000)	/* CODA */
+#define PHY_BASEADDR_CLKGEN34		(0xC00C6000)	/* CRYPTO */
+#define PHY_BASEADDR_CLKGEN35		(0xC00B6000)	/* SCALER */
+#define PHY_BASEADDR_CLKGEN36		(0xC00CB000)	/* PDM */
+#define PHY_BASEADDR_CLKGEN37		(0xC00AC000)	/* SPI0 */
+#define PHY_BASEADDR_CLKGEN38		(0xC00AD000)	/* SPI1 */
+#define PHY_BASEADDR_CLKGEN39		(0xC00A7000)	/* SPI2 */
+#if defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_CLKGEN40		(0xC009A000)
+#endif
+#define PHY_BASEADDR_DREX		(0xC00E0000)
+
+#define PHY_BASEADDR_CS_NAND		(0x2C000000)
+
+#define PHY_BASEADDR_SRAM		(0xFFFF0000)
+
+/*
+ * Nexell clock generator
+ */
+#define CLK_ID_TIMER_1			0
+#define CLK_ID_TIMER_2			1
+#define CLK_ID_TIMER_3			2
+#define CLK_ID_PWM_1			3
+#define CLK_ID_PWM_2			4
+#define CLK_ID_PWM_3			5
+#define CLK_ID_I2C_0			6
+#define CLK_ID_I2C_1			7
+#define CLK_ID_I2C_2			8
+#define CLK_ID_MIPI			9
+#define CLK_ID_GMAC			10	/* External Clock 1 */
+#define CLK_ID_SPDIF_TX			11
+#define CLK_ID_MPEGTSI			12
+#define CLK_ID_PWM_0			13
+#define CLK_ID_TIMER_0			14
+#define CLK_ID_I2S_0			15	/* External Clock 1 */
+#define CLK_ID_I2S_1			16	/* External Clock 1 */
+#define CLK_ID_I2S_2			17	/* External Clock 1 */
+#define CLK_ID_SDHC_0			18
+#define CLK_ID_SDHC_1			19
+#define CLK_ID_SDHC_2			20
+#define CLK_ID_MALI			21
+#define CLK_ID_UART_0			22	/* UART0_MODULE */
+#define CLK_ID_UART_2			23	/* UART1_MODULE */
+#define CLK_ID_UART_1			24	/* pl01115_Uart_modem_MODULE  */
+#define CLK_ID_UART_3			25	/* pl01115_Uart_nodma0_MODULE */
+#define CLK_ID_UART_4			26	/* pl01115_Uart_nodma1_MODULE */
+#define CLK_ID_UART_5			27	/* pl01115_Uart_nodma2_MODULE */
+#define CLK_ID_DIT			28
+#define CLK_ID_PPM			29
+#define CLK_ID_VIP_0			30	/* External Clock 1 */
+#define CLK_ID_VIP_1			31	/* External Clock 1, 2 */
+#define CLK_ID_USB2HOST			32	/* External Clock 2 */
+#define CLK_ID_CODA			33
+#define CLK_ID_CRYPTO			34
+#define CLK_ID_SCALER			35
+#define CLK_ID_PDM			36
+#define CLK_ID_SPI_0			37
+#define CLK_ID_SPI_1			38
+#define CLK_ID_SPI_2			39
+#define CLK_ID_MAX			39
+
+/*
+ * Nexell Reset control
+ */
+#define RESET_ID_AC97			0
+#define RESET_ID_CPU1			1
+#define RESET_ID_CPU2			2
+#define RESET_ID_CPU3			3
+#define RESET_ID_WD1			4
+#define RESET_ID_WD2			5
+#define RESET_ID_WD3			6
+#define RESET_ID_CRYPTO			7
+#define RESET_ID_DEINTERLACE		8
+#define RESET_ID_DISP_TOP		9
+#define RESET_ID_DISPLAY		10
+#define RESET_ID_RESCONV		11
+#define RESET_ID_LCDIF			12
+#define RESET_ID_HDMI			13
+#define RESET_ID_HDMI_VIDEO		14
+#define RESET_ID_HDMI_SPDIF		15
+#define RESET_ID_HDMI_TMDS		16
+#define RESET_ID_HDMI_PHY		17
+#define RESET_ID_LVDS			18
+#define RESET_ID_ECID			19
+#define RESET_ID_I2C0			20
+#define RESET_ID_I2C1			21
+#define RESET_ID_I2C2			22
+#define RESET_ID_I2S0			23
+#define RESET_ID_I2S1			24
+#define RESET_ID_I2S2			25
+#define RESET_ID_DREX_C			26
+#define RESET_ID_DREX_A			27
+#define RESET_ID_DREX			28
+#define RESET_ID_MIPI			29
+#define RESET_ID_MIPI_DSI		30
+#define RESET_ID_MIPI_CSI		31
+#define RESET_ID_MIPI_PHY_S		32
+#define RESET_ID_MIPI_PHY_M		33
+#define RESET_ID_MPEGTSI		34
+#define RESET_ID_PDM			35
+#define RESET_ID_TIMER			36
+#define RESET_ID_PWM			37
+#define RESET_ID_SCALER			38
+#define RESET_ID_SDMMC0			39
+#define RESET_ID_SDMMC1			40
+#define RESET_ID_SDMMC2			41
+#define RESET_ID_SPDIFRX		42
+#define RESET_ID_SPDIFTX		43
+#define RESET_ID_SSP0_P			44
+#define RESET_ID_SSP0			45
+#define RESET_ID_SSP1_P			46
+#define RESET_ID_SSP1			47
+#define RESET_ID_SSP2_P			48
+#define RESET_ID_SSP2			49
+#define RESET_ID_UART0			50	/* UART1 */
+#define RESET_ID_UART1			51	/* pl01115_Uart_modem	*/
+#define RESET_ID_UART2			52	/* UART1 */
+#define RESET_ID_UART3			53	/* pl01115_Uart_nodma0 */
+#define RESET_ID_UART4			54	/* pl01115_Uart_nodma1 */
+#define RESET_ID_UART5			55	/* pl01115_Uart_nodma2 */
+#define RESET_ID_USB20HOST		56
+#define RESET_ID_USB20OTG		57
+#define RESET_ID_WDT			58
+#define RESET_ID_WDT_POR		59
+#define RESET_ID_ADC			60
+#define RESET_ID_CODA_A			61
+#define RESET_ID_CODA_P			62
+#define RESET_ID_CODA_C			63
+#define RESET_ID_DWC_GMAC		64
+#define RESET_ID_MALI400		65
+#define RESET_ID_PPM			66
+#define RESET_ID_VIP1			67
+#define RESET_ID_VIP0			68
+#if defined(CONFIG_ARCH_S5P6818)
+#define RESET_ID_VIP2			69
+#endif
+
+/*
+ * device name
+ */
+#define DEV_NAME_UART			"nx-uart" /* pl0115 (amba-pl011.c) */
+#define DEV_NAME_FB			"nx-fb"
+#define DEV_NAME_DISP			"nx-disp"
+#define DEV_NAME_LCD			"nx-lcd"
+#define DEV_NAME_LVDS			"nx-lvds"
+#define DEV_NAME_HDMI			"nx-hdmi"
+#define DEV_NAME_RESCONV		"nx-resconv"
+#define DEV_NAME_MIPI			"nx-mipi"
+#define DEV_NAME_PCM			"nx-pcm"
+#define DEV_NAME_I2S			"nx-i2s"
+#define DEV_NAME_SPDIF_TX		"nx-spdif-tx"
+#define DEV_NAME_SPDIF_RX		"nx-spdif-rx"
+#define DEV_NAME_I2C			"nx-i2c"
+#define DEV_NAME_NAND			"nx-nand"
+#define DEV_NAME_KEYPAD			"nx-keypad"
+#define DEV_NAME_SDHC			"nx-sdhc"
+#define DEV_NAME_PWM			"nx-pwm"
+#define DEV_NAME_TIMER			"nx-timer"
+#define DEV_NAME_SOC_PWM		"nx-soc-pwm"
+#define DEV_NAME_GPIO			"nx-gpio"
+#define DEV_NAME_RTC			"nx-rtc"
+#define DEV_NAME_GMAC			"nx-gmac"
+#define DEV_NAME_MPEGTSI		"nx-mpegtsi"
+#define DEV_NAME_MALI			"nx-mali"
+#define DEV_NAME_DIT			"nx-deinterlace"
+#define DEV_NAME_PPM			"nx-ppm"
+#define DEV_NAME_VIP			"nx-vip"
+#define DEV_NAME_CODA			"nx-coda"
+#define DEV_NAME_USB2HOST		"nx-usb2h"
+#define DEV_NAME_CRYPTO			"nx-crypto"
+#define DEV_NAME_SCALER			"nx-scaler"
+#define DEV_NAME_PDM			"nx-pdm"
+#define DEV_NAME_SPI			"nx-spi"
+#define DEV_NAME_CPUFREQ		"nx-cpufreq"
+
+/*
+ * clock generator
+ */
+#define CORECLK_NAME_PLL0		"pll0"	/* cpu clock */
+#define CORECLK_NAME_PLL1		"pll1"
+#define CORECLK_NAME_PLL2		"pll2"
+#define CORECLK_NAME_PLL3		"pll3"
+#define CORECLK_NAME_FCLK		"fclk"
+#define CORECLK_NAME_MCLK		"mclk"
+#define CORECLK_NAME_BCLK		"bclk"
+#define CORECLK_NAME_PCLK		"pclk"
+#define CORECLK_NAME_HCLK		"hclk"
+
+#define CORECLK_ID_PLL0			0
+#define CORECLK_ID_PLL1			1
+#define CORECLK_ID_PLL2			2
+#define CORECLK_ID_PLL3			3
+#define CORECLK_ID_FCLK			4
+#define CORECLK_ID_MCLK			5
+#define CORECLK_ID_BCLK			6
+#define CORECLK_ID_PCLK			7
+#define CORECLK_ID_HCLK			8
+
+#define ALIVEPWRGATEREG			(PHY_BASEADDR_ALIVE + 0x0)
+
+#if defined(CONFIG_ARCH_S5P4418)
+#define	SCR_ARM_SECOND_BOOT		(0xC0010C1C)	 /* PWR scratch */
+#define	SCR_ARM_SECOND_BOOT_REG1	(0xc0010234) /* ToDo : Check Address */
+#elif defined(CONFIG_ARCH_S5P6818)
+#define	SCR_ARM_SECOND_BOOT		(0xc0010230)	 /* PWR scratch */
+#define	SCR_ARM_SECOND_BOOT_REG1	(0xc0010234) /* PWR scratch */
+#define	SCR_ARM_SECOND_BOOT_REG2	(0xc0010238) /* PWR scratch */
+#endif
+
+#define	SCR_ALIVE_BASE			(PHY_BASEADDR_ALIVE)
+#define	SCR_SIGNAGURE_RESET		(SCR_ALIVE_BASE + 0x068)
+#define	SCR_SIGNAGURE_SET		(SCR_ALIVE_BASE + 0x06C)
+#define	SCR_SIGNAGURE_READ		(SCR_ALIVE_BASE + 0x070)
+
+#define SYSRSTCONFIG			(0x23C)
+#define DEVICEBOOTINFO			(0x50)
+#define BOOTMODE_MASK			(0x7)
+#define BOOTMODE_SDMMC			5
+#define BOOTMODE_USB			6
+#define BOOTMODE_SDMMC_PORT_VAL(x)	((((x) >> 3) & 1) |	\
+					 (((x) >> 19 & 1) << 1))
+#define EMMC_PORT_NUM			2
+#define SD_PORT_NUM			0
+#define ID_REG_EC0				(0x54)
+#define WIRE0_MASK				(0x1)
+
+#ifndef __ASSEMBLY__
+
+#define NS_IN_HZ (1000000000UL)
+#define TO_PERIOD_NS(freq)	(NS_IN_HZ / (freq))
+#define TO_DUTY_NS(duty, freq)  (duty ? TO_PERIOD_NS(freq) / (100 / duty) : 0)
+
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __NEXELL_H__ */
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/nx_gpio.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/nx_gpio.h
new file mode 100644
index 000000000..91803d28c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/nx_gpio.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <ybpark@nexell.co.kr>
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+
+#ifndef __nx_gpio_h__
+#define __nx_gpio_h__
+
+struct nx_gpio_register_set {
+	u32 gpioxout;
+	u32 gpioxoutenb;
+	u32 gpioxdetmode[2];
+	u32 gpioxintenb;
+	u32 gpioxdet;
+	u32 gpioxpad;
+	u32 gpioxpuenb;
+	u32 gpioxaltfn[2];
+	u32 gpioxdetmodeex;
+	u32 __reserved[4];
+	u32 gpioxdetenb;
+	u32 gpiox_slew;
+	u32 gpiox_slew_disable_default;
+	u32 gpiox_drv1;
+	u32 gpiox_drv1_disable_default;
+	u32 gpiox_drv0;
+	u32 gpiox_drv0_disable_default;
+	u32 gpiox_pullsel;
+	u32 gpiox_pullsel_disable_default;
+	u32 gpiox_pullenb;
+	u32 gpiox_pullenb_disable_default;
+	u32 gpiox_input_mux_select0;
+	u32 gpiox_input_mux_select1;
+	u8 __reserved1[0x1000 - 0x70];
+};
+
+enum {
+	nx_gpio_padfunc_0 = 0ul,
+	nx_gpio_padfunc_1 = 1ul,
+	nx_gpio_padfunc_2 = 2ul,
+	nx_gpio_padfunc_3 = 3ul
+};
+
+enum {
+	nx_gpio_drvstrength_0 = 0ul,
+	nx_gpio_drvstrength_1 = 1ul,
+	nx_gpio_drvstrength_2 = 2ul,
+	nx_gpio_drvstrength_3 = 3ul
+};
+
+enum {
+	nx_gpio_pull_down = 0ul,
+	nx_gpio_pull_up = 1ul,
+	nx_gpio_pull_off = 2ul
+};
+
+int nx_gpio_initialize(void);
+u32 nx_gpio_get_number_of_module(void);
+u32 nx_gpio_get_size_of_register_set(void);
+void nx_gpio_set_base_address(u32 module_index, void *base_address);
+void *nx_gpio_get_base_address(u32 module_index);
+int nx_gpio_open_module(u32 module_index);
+int nx_gpio_close_module(u32 module_index);
+int nx_gpio_check_busy(u32 module_index);
+void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number,
+			       int detect_enb);
+void nx_gpio_set_pad_function(u32 module_index, u32 bit_number, u32 padfunc);
+void nx_gpio_set_pad_function32(u32 module_index, u32 msbvalue, u32 lsbvalue);
+int nx_gpio_get_pad_function(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_enable(u32 module_index, u32 bit_number,
+			       int output_enb);
+int nx_gpio_get_detect_enable(u32 module_index, u32 bit_number);
+u32 nx_gpio_get_detect_enable32(u32 module_index);
+void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number,
+			       int detect_enb);
+void nx_gpio_set_detect_enable32(u32 module_index, u32 enable_flag);
+int nx_gpio_get_output_enable(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_enable32(u32 module_index, int output_enb);
+u32 nx_gpio_get_output_enable32(u32 module_index);
+void nx_gpio_set_output_value(u32 module_index, u32 bit_number, int value);
+int nx_gpio_get_output_value(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_value32(u32 module_index, u32 value);
+u32 nx_gpio_get_output_value32(u32 module_index);
+int nx_gpio_get_input_value(u32 module_index, u32 bit_number);
+void nx_gpio_set_pull_select(u32 module_index, u32 bit_number, int enable);
+void nx_gpio_set_pull_select32(u32 module_index, u32 value);
+int nx_gpio_get_pull_select(u32 module_index, u32 bit_number);
+u32 nx_gpio_get_pull_select32(u32 module_index);
+void nx_gpio_set_pull_mode(u32 module_index, u32 bit_number, u32 mode);
+void nx_gpio_set_fast_slew(u32 module_index, u32 bit_number, int enable);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+						u32 bit_number, int enable);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+						u32 bit_number, int enable);
+void nx_gpio_set_drive_strength(u32 module_index, u32 bit_number,
+				u32 drvstrength);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+						u32 bit_number, int enable);
+u32 nx_gpio_get_drive_strength(u32 module_index, u32 bit_number);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/pwm.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/pwm.h
new file mode 100644
index 000000000..08a287d30
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/pwm.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_PWM_H_
+#define __ASM_ARM_ARCH_PWM_H_
+
+#define PRESCALER_0		(8 - 1)		/* prescaler of timer 0, 1 */
+#define PRESCALER_1		(16 - 1)	/* prescaler of timer 2, 3, 4 */
+
+/* Divider MUX */
+#define MUX_DIV_1		0		/* 1/1 period */
+#define MUX_DIV_2		1		/* 1/2 period */
+#define MUX_DIV_4		2		/* 1/4 period */
+#define MUX_DIV_8		3		/* 1/8 period */
+#define MUX_DIV_16		4		/* 1/16 period */
+
+#define MUX_DIV_SHIFT(x)	((x) * 4)
+
+#define TCON_OFFSET(x)		(((x) + 1) * (!!(x)) << 2)
+
+#define TCON_START(x)		(1 << TCON_OFFSET(x))
+#define TCON_UPDATE(x)		(1 << (TCON_OFFSET(x) + 1))
+#define TCON_INVERTER(x)	(1 << (TCON_OFFSET(x) + 2))
+#define TCON_AUTO_RELOAD(x)	(1 << (TCON_OFFSET(x) + 3))
+#define TCON4_AUTO_RELOAD	(1 << 22)
+
+#ifndef __ASSEMBLY__
+struct s5p_timer {
+	unsigned int	tcfg0;
+	unsigned int	tcfg1;
+	unsigned int	tcon;
+	unsigned int	tcntb0;
+	unsigned int	tcmpb0;
+	unsigned int	tcnto0;
+	unsigned int	tcntb1;
+	unsigned int	tcmpb1;
+	unsigned int	tcnto1;
+	unsigned int	tcntb2;
+	unsigned int	tcmpb2;
+	unsigned int	tcnto2;
+	unsigned int	tcntb3;
+	unsigned int	res1;
+	unsigned int	tcnto3;
+	unsigned int	tcntb4;
+	unsigned int	tcnto4;
+	unsigned int	tintcstat;
+};
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/reset.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/reset.h
new file mode 100644
index 000000000..e1301d4e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/reset.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <ybpark@nexell.co.kr>
+ */
+
+#ifndef __NEXELL_RESET__
+#define __NEXELL_RESET__
+
+#define NUMBER_OF_RESET_MODULE_PIN      69
+
+enum rstcon {
+	RSTCON_ASSERT	= 0UL,
+	RSTCON_NEGATE	= 1UL
+};
+
+void nx_rstcon_setrst(u32 rstindex, enum rstcon status);
+
+#endif /* __NEXELL_RESET__ */
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/sec_reg.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/sec_reg.h
new file mode 100644
index 000000000..e3ae5ac1b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/sec_reg.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park@nexell.co.kr>
+ */
+
+#define NEXELL_L2C_SEC_ID	0
+#define NEXELL_MALI_SEC_ID	2
+#define NEXELL_MIPI_SEC_ID	4
+#define NEXELL_TOFF_SEC_ID	6
+
+int write_sec_reg_by_id(void __iomem *reg, int val, int id);
+int read_sec_reg_by_id(void __iomem *reg, int id);
+int read_sec_reg(void __iomem *reg);
+int write_sec_reg(void __iomem *reg, int val);
diff --git a/roms/u-boot/arch/arm/mach-nexell/include/mach/tieoff.h b/roms/u-boot/arch/arm/mach-nexell/include/mach/tieoff.h
new file mode 100644
index 000000000..70e9652b6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/include/mach/tieoff.h
@@ -0,0 +1,423 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park@nexell.co.kr>
+ */
+
+#ifndef _NEXELL_TIEOFF_H
+#define _NEXELL_TIEOFF_H
+
+void nx_tieoff_set(u32 tieoff_index, u32 tieoff_value);
+u32 nx_tieoff_get(u32 tieoff_index);
+
+#if defined(CONFIG_ARCH_S5P4418)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCOREOUT	((1 << 16) | 0)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU0	((1 << 16) | 1)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU1	((1 << 16) | 2)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU2	((1 << 16) | 3)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU3	((1 << 16) | 4)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_COREPWRDOWN	((1 << 16) | 5)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU0PWRDOWN	((1 << 16) | 6)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU1PWRDOWN	((1 << 16) | 7)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU2PWRDOWN	((1 << 16) | 8)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU3PWRDOWN	((1 << 16) | 9)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2_CFGENDIAN	((1 << 16) | 10)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMAS		((1 << 16) | 11)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_0	((1 << 16) | 12)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_1	((1 << 16) | 13)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2PGEN_0	((1 << 16) | 14)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2PGEN_1	((1 << 16) | 15)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPL2_0	((1 << 16) | 16)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPL2_1	((1 << 16) | 17)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_VINITHI	((4 << 16) | 18)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2EMA		((3 << 16) | 22)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_TEINIT		((4 << 16) | 25)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMAW		((2 << 16) | 29)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2EMAW		((2 << 16) | 32)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMA		((3 << 16) | 34)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPUCLKOFF	((4 << 16) | 37)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI0	((2 << 16) | 41)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI1	((2 << 16) | 43)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI2	((2 << 16) | 45)
+#elif defined(CONFIG_ARCH_S5P6818)
+#define NX_TIEOFF_MMC_8BIT				((1 << 16) | 5)
+#endif
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAA		((3 << 16) | 47)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAB		((3 << 16) | 50)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAWA		((2 << 16) | 53)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAWB		((2 << 16) | 55)
+#define NX_TIEOFF_AXISRAM0_i_nPowerDown			((1 << 16) | 57)
+#define NX_TIEOFF_AXISRAM0_i_nSleep			((1 << 16) | 58)
+#define NX_TIEOFF_CAN0_i_TIE_rf1_EMA			((3 << 16) | 59)
+#define NX_TIEOFF_CAN0_i_TIE_rf1_EMAW			((2 << 16) | 62)
+#define NX_TIEOFF_CAN0_i_nPowerDown			((1 << 16) | 64)
+#define NX_TIEOFF_CAN0_i_nSleep				((1 << 16) | 65)
+#define NX_TIEOFF_CAN1_i_TIE_rf1_EMA			((3 << 16) | 66)
+#define NX_TIEOFF_CAN1_i_TIE_rf1_EMAW			((2 << 16) | 69)
+#define NX_TIEOFF_CAN1_i_nPowerDown			((1 << 16) | 71)
+#define NX_TIEOFF_CAN1_i_nSleep				((1 << 16) | 72)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF1_EMA		((3 << 16) | 73)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF1_EMAW		((2 << 16) | 76)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2_EMAA		((3 << 16) | 78)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2_EMAB		((3 << 16) | 81)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2W_EMAA		((3 << 16) | 84)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2W_EMAB		((3 << 16) | 87)
+#define NX_TIEOFF_DISPLAYTOP0_i_ResConv_nPowerDown	((1 << 16) | 90)
+#define NX_TIEOFF_DISPLAYTOP0_i_ResConv_nSleep		((1 << 16) | 91)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_nPowerDown		((2 << 16) | 92)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_nSleep		((2 << 16) | 94)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_PHY_REFCLK_SEL	((1 << 16) | 96)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_SPSRAM_EMA	((3 << 16) | 97)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_SPSRAM_EMAW	((2 << 16) | 100)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_1R1W_EMAA ((3 << 16) | 102)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_1R1W_EMAB ((3 << 16) | 105)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAA	((3 << 16) | 108)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAB	((3 << 16) | 111)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAWA	((2 << 16) | 114)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAWB	((2 << 16) | 116)
+#define NX_TIEOFF_MCUSTOP0_i_vrom_EMA			((3 << 16) | 118)
+#define NX_TIEOFF_DREX0_CKE_INIT			((1 << 16) | 121)
+#define NX_TIEOFF_DREX0_CA_SWAP				((1 << 16) | 122)
+#define NX_TIEOFF_DREX0_CSYSREQ				((1 << 16) | 123)
+#define NX_TIEOFF_DREX0_PAUSE_REQ			((1 << 16) | 124)
+#define NX_TIEOFF_DREX0_PEREV_TRIGGER			((1 << 16) | 125)
+#define NX_TIEOFF_DREX0_CTRL_HCKE			((1 << 16) | 126)
+#define NX_TIEOFF_DREX0_DFI_RESET_N_P0			((1 << 16) | 127)
+#define NX_TIEOFF_DREX0_DFI_RESET_N_P1			((1 << 16) | 128)
+#define NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAA		((3 << 16) | 129)
+#define NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAB		((3 << 16) | 132)
+#define NX_TIEOFF_MIPI0_i_NX_NPOWERDOWN			((4 << 16) | 135)
+#define NX_TIEOFF_MIPI0_i_NX_NSLEEP			((4 << 16) | 139)
+#define NX_TIEOFF_SCALER0_i_NX_EMA			((3 << 16) | 143)
+#define NX_TIEOFF_SCALER0_i_NX_EMAW			((2 << 16) | 146)
+#define NX_TIEOFF_UART0_USESMC				((1 << 16) | 148)
+#define NX_TIEOFF_UART0_SMCTXENB			((1 << 16) | 149)
+#define NX_TIEOFF_UART0_SMCRXENB			((1 << 16) | 150)
+#define NX_TIEOFF_UART1_USESMC				((1 << 16) | 151)
+#define NX_TIEOFF_UART1_SMCTXENB			((1 << 16) | 152)
+#define NX_TIEOFF_UART1_SMCRXENB			((1 << 16) | 153)
+#define NX_TIEOFF_UART2_USESMC				((1 << 16) | 154)
+#define NX_TIEOFF_UART2_SMCTXENB			((1 << 16) | 155)
+#define NX_TIEOFF_UART2_SMCRXENB			((1 << 16) | 156)
+#define NX_TIEOFF_UART3_USESMC				((1 << 16) | 157)
+#define NX_TIEOFF_UART3_SMCTXENB			((1 << 16) | 158)
+#define NX_TIEOFF_UART3_SMCRXENB			((1 << 16) | 159)
+#define NX_TIEOFF_UART4_USESMC				((1 << 16) | 160)
+#define NX_TIEOFF_UART4_SMCTXENB			((1 << 16) | 161)
+#define NX_TIEOFF_UART4_SMCRXENB			((1 << 16) | 162)
+#define NX_TIEOFF_UART5_USESMC				((1 << 16) | 163)
+#define NX_TIEOFF_UART5_SMCTXENB			((1 << 16) | 164)
+#define NX_TIEOFF_UART5_SMCRXENB			((1 << 16) | 165)
+#define NX_TIEOFF_USB20HOST0_i_nPowerDown		((1 << 16) | 166)
+#define NX_TIEOFF_USB20HOST0_i_nSleep			((1 << 16) | 167)
+#define NX_TIEOFF_USB20HOST0_i_NX_RF1_EMA		((3 << 16) | 168)
+#define NX_TIEOFF_USB20HOST0_i_NX_RF1_EMAW		((2 << 16) | 171)
+#define NX_TIEOFF_USB20HOST0_sys_interrupt_i		((1 << 16) | 173)
+#define NX_TIEOFF_USB20HOST0_i_hsic_en			((3 << 16) | 174)
+#define NX_TIEOFF_USB20HOST0_i_nResetSync		((1 << 16) | 177)
+#define NX_TIEOFF_USB20HOST0_i_nResetSync_ohci		((1 << 16) | 178)
+#define NX_TIEOFF_USB20HOST0_i_nAuxWellResetSync	((1 << 16) | 179)
+#define NX_TIEOFF_USB20HOST0_i_nHostPhyResetSync	((1 << 16) | 180)
+#define NX_TIEOFF_USB20HOST0_i_nHostUtmiResetSync	((1 << 16) | 181)
+#define NX_TIEOFF_USB20HOST0_i_nHostHsicResetSync	((1 << 16) | 182)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_FREE_CLOCK_ENB	((1 << 16) | 183)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_480M_FROM_OTG_PHY	((1 << 16) | 184)
+#define NX_TIEOFF_USB20HOST0_ss_word_if_enb_i		((1 << 16) | 185)
+#define NX_TIEOFF_USB20HOST0_ss_word_if_i		((1 << 16) | 186)
+#define NX_TIEOFF_USB20HOST0_ss_utmi_backward_enb_i	((1 << 16) | 187)
+#define NX_TIEOFF_USB20HOST0_ss_resume_utmi_pls_dis_i	((1 << 16) | 188)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_0_i		((3 << 16) | 189)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_1_i		((3 << 16) | 192)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_2_i		((3 << 16) | 195)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_3_i		((3 << 16) | 198)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_4_i		((3 << 16) | 201)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_5_i		((3 << 16) | 204)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_6_i		((3 << 16) | 207)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_7_i		((3 << 16) | 210)
+#define NX_TIEOFF_USB20HOST0_ss_power_state_valid_i	((1 << 16) | 213)
+#define NX_TIEOFF_USB20HOST0_ss_nxt_power_state_valid_i ((1 << 16) | 214)
+#define NX_TIEOFF_USB20HOST0_ss_power_state_i		((2 << 16) | 215)
+#define NX_TIEOFF_USB20HOST0_ss_next_power_state_i	((2 << 16) | 217)
+#define NX_TIEOFF_USB20HOST0_app_prt_ovrcur_i		((3 << 16) | 219)
+#define NX_TIEOFF_USB20HOST0_ss_simulation_mode_i	((1 << 16) | 222)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_host_i	((6 << 16) | 224)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_5_i		((3 << 16) | 230)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_4_i		((3 << 16) | 233)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_3_i		((3 << 16) | 236)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_2_i		((3 << 16) | 239)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_1_i		((3 << 16) | 242)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_0_i		((3 << 16) | 245)
+#define NX_TIEOFF_USB20HOST0_ss_autoppd_on_overcur_en_i ((1 << 16) | 248)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr16_i		((1 << 16) | 249)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr8_i		((1 << 16) | 250)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr4_i		((1 << 16) | 251)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incrx_align_i	((1 << 16) | 252)
+#define NX_TIEOFF_USB20HOST0_i_ohci_0_cntsel_n		((1 << 16) | 253)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_irq1_i		((1 << 16) | 254)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_irq12_i		((1 << 16) | 255)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_io_hit_i	((1 << 16) | 256)
+#define NX_TIEOFF_USB20HOST0_ss_hubsetup_min_i		((1 << 16) | 257)
+#define NX_TIEOFF_USB20HOST0_app_start_clk_i		((1 << 16) | 258)
+#define NX_TIEOFF_USB20HOST0_ohci_susp_lgcy_i		((1 << 16) | 259)
+#define NX_TIEOFF_USB20HOST0_i_SIDDQ			((1 << 16) | 260)
+#define NX_TIEOFF_USB20HOST0_i_VATESTENB		((2 << 16) | 261)
+#define NX_TIEOFF_USB20HOST0_i_POR_ENB			((1 << 16) | 263)
+#define NX_TIEOFF_USB20HOST0_i_POR			((1 << 16) | 264)
+#define NX_TIEOFF_USB20HOST0_i_REFCLKSEL		((2 << 16) | 265)
+#define NX_TIEOFF_USB20HOST0_i_FSEL			((3 << 16) | 267)
+#define NX_TIEOFF_USB20HOST0_i_COMMONONN		((1 << 16) | 270)
+#define NX_TIEOFF_USB20HOST0_i_RESREQIN			((1 << 16) | 271)
+#define NX_TIEOFF_USB20HOST0_i_PORTRESET		((1 << 16) | 272)
+#define NX_TIEOFF_USB20HOST0_i_OTGDISABLE		((1 << 16) | 273)
+#define NX_TIEOFF_USB20HOST0_i_LOOPBACKENB		((1 << 16) | 274)
+#define NX_TIEOFF_USB20HOST0_i_IDPULLUPi		((1 << 16) | 275)
+#define NX_TIEOFF_USB20HOST0_i_DRVVBUS			((1 << 16) | 276)
+#define NX_TIEOFF_USB20HOST0_i_ADPCHRG			((1 << 16) | 277)
+#define NX_TIEOFF_USB20HOST0_i_ADPDISCHRG		((1 << 16) | 278)
+#define NX_TIEOFF_USB20HOST0_i_ADPPRBENB		((1 << 16) | 279)
+#define NX_TIEOFF_USB20HOST0_i_VBUSVLDEXT		((1 << 16) | 280)
+#define NX_TIEOFF_USB20HOST0_i_VBUSVLDEXTSEL		((1 << 16) | 281)
+#define NX_TIEOFF_USB20HOST0_i_DPPULLDOWN		((1 << 16) | 282)
+#define NX_TIEOFF_USB20HOST0_i_DMPULLDOWN		((1 << 16) | 283)
+#define NX_TIEOFF_USB20HOST0_i_SUSPENDM_ENB		((1 << 16) | 284)
+#define NX_TIEOFF_USB20HOST0_i_SUSPENDM			((1 << 16) | 285)
+#define NX_TIEOFF_USB20HOST0_i_SLEEPM_ENB		((1 << 16) | 286)
+#define NX_TIEOFF_USB20HOST0_i_SLEEPM			((1 << 16) | 287)
+#define NX_TIEOFF_USB20HOST0_i_OPMODE_ENB		((1 << 16) | 288)
+#define NX_TIEOFF_USB20HOST0_i_OPMODE			((2 << 16) | 289)
+#define NX_TIEOFF_USB20HOST0_i_TERMSEL_ENB		((1 << 16) | 291)
+#define NX_TIEOFF_USB20HOST0_i_TERMSEL			((1 << 16) | 292)
+#define NX_TIEOFF_USB20HOST0_i_XCVRSEL_ENB		((1 << 16) | 293)
+#define NX_TIEOFF_USB20HOST0_i_XCVRSEL			((2 << 16) | 294)
+#define NX_TIEOFF_USB20HOST0_i_WORDINTERFACE_ENB	((1 << 16) | 296)
+#define NX_TIEOFF_USB20HOST0_i_WORDINTERFACE		((1 << 16) | 297)
+#define NX_TIEOFF_USB20HOST0_i_TXBITSTUFFEN		((1 << 16) | 298)
+#define NX_TIEOFF_USB20HOST0_i_TXBITSTUFFENH		((1 << 16) | 299)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDPDATA		((1 << 16) | 300)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDMDATA		((1 << 16) | 301)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDPEN		((1 << 16) | 302)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDMEN		((1 << 16) | 303)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSSEL		((1 << 16) | 304)
+#define NX_TIEOFF_USB20HOST0_i_COMPDISTUNE		((3 << 16) | 305)
+#define NX_TIEOFF_USB20HOST0_i_SQRXTUNE			((3 << 16) | 308)
+#define NX_TIEOFF_USB20HOST0_i_OTGTUNE			((3 << 16) | 311)
+#define NX_TIEOFF_USB20HOST0_i_TXHSXVTUNE		((2 << 16) | 314)
+#define NX_TIEOFF_USB20HOST0_i_TXFSLSTUNE		((4 << 16) | 316)
+#define NX_TIEOFF_USB20HOST0_i_TXVREFTUNE		((4 << 16) | 320)
+#define NX_TIEOFF_USB20HOST0_i_TXRISETUNE		((2 << 16) | 324)
+#define NX_TIEOFF_USB20HOST0_i_TXRESTUNE		((2 << 16) | 326)
+#define NX_TIEOFF_USB20HOST0_i_TXPREEMPAMPTUNE		((2 << 16) | 328)
+#define NX_TIEOFF_USB20HOST0_i_TXPREEMPPULSETUNE	((1 << 16) | 330)
+#define NX_TIEOFF_USB20HOST0_i_CHRGSEL			((1 << 16) | 331)
+#define NX_TIEOFF_USB20HOST0_i_VDATDETENB		((1 << 16) | 332)
+#define NX_TIEOFF_USB20HOST0_i_VDATSRCENB		((1 << 16) | 333)
+#define NX_TIEOFF_USB20HOST0_i_DCDENB			((1 << 16) | 334)
+#define NX_TIEOFF_USB20HOST0_i_ACAENB			((1 << 16) | 335)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_MSTRXCVR		((1 << 16) | 336)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SIDDQ		((1 << 16) | 337)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_POR_ENB		((1 << 16) | 338)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_POR			((1 << 16) | 339)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_REFCLKDIV		((7 << 16) | 340)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_REFCLKSEL		((2 << 16) | 347)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_COMMONONN		((1 << 16) | 349)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_PORTRESET		((1 << 16) | 350)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_LOOPBACKENB		((1 << 16) | 351)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_DPPULLDOWN		((1 << 16) | 352)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_DMPULLDOWN		((1 << 16) | 353)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SUSPENDM_ENB	((1 << 16) | 354)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SUSPENDM		((1 << 16) | 355)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SLEEPM_ENB		((1 << 16) | 356)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SLEEPM		((1 << 16) | 357)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_MSTRXOPU		((1 << 16) | 358)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_OPMODE_ENB		((1 << 16) | 359)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_OPMODE		((2 << 16) | 360)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_XCVRSELECT_ENB	((1 << 16) | 362)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_XCVRSELECT		((1 << 16) | 363)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_WORDINTERFACE_ENB	((1 << 16) | 364)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_WORDINTERFACE	((1 << 16) | 365)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXBITSTUFFEN	((1 << 16) | 366)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXBITSTUFFENH	((1 << 16) | 367)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXRPUTUNE		((2 << 16) | 368)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXRPDTUNE		((2 << 16) | 370)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXSRTUNE		((4 << 16) | 372)
+#define NX_TIEOFF_USB20OTG0_i_nPowerDown		((1 << 16) | 376)
+#define NX_TIEOFF_USB20OTG0_i_nSleep			((1 << 16) | 377)
+#define NX_TIEOFF_USB20OTG0_i_NX_RF1_EMA		((3 << 16) | 378)
+#define NX_TIEOFF_USB20OTG0_i_NX_RF1_EMAW		((2 << 16) | 381)
+#define NX_TIEOFF_USB20OTG0_i_ss_scaledown_mode		((2 << 16) | 384)
+#define NX_TIEOFF_USB20OTG0_i_gp_in			((16 << 16) | 386)
+#define NX_TIEOFF_USB20OTG0_i_sof_count			((14 << 16) | 402)
+#define NX_TIEOFF_USB20OTG0_i_sys_dma_done		((1 << 16) | 416)
+#define NX_TIEOFF_USB20OTG0_i_if_select_hsic		((1 << 16) | 417)
+#define NX_TIEOFF_USB20OTG0_i_nResetSync		((1 << 16) | 418)
+#define NX_TIEOFF_USB20OTG0_i_nUtmiResetSync		((1 << 16) | 419)
+#define NX_TIEOFF_USB20OTG0_i_SIDDQ			((1 << 16) | 420)
+#define NX_TIEOFF_USB20OTG0_i_VATESTENB			((2 << 16) | 421)
+#define NX_TIEOFF_USB20OTG0_i_POR_ENB			((1 << 16) | 423)
+#define NX_TIEOFF_USB20OTG0_i_POR			((1 << 16) | 424)
+#define NX_TIEOFF_USB20OTG0_i_REFCLKSEL			((2 << 16) | 425)
+#define NX_TIEOFF_USB20OTG0_i_FSEL			((3 << 16) | 427)
+#define NX_TIEOFF_USB20OTG0_i_COMMONONN			((1 << 16) | 430)
+#define NX_TIEOFF_USB20OTG0_i_RESREQIN			((1 << 16) | 431)
+#define NX_TIEOFF_USB20OTG0_i_PORTRESET			((1 << 16) | 432)
+#define NX_TIEOFF_USB20OTG0_i_OTGDISABLE		((1 << 16) | 433)
+#define NX_TIEOFF_USB20OTG0_i_LOOPBACKENB		((1 << 16) | 434)
+#define NX_TIEOFF_USB20OTG0_i_IDPULLUP			((1 << 16) | 435)
+#define NX_TIEOFF_USB20OTG0_i_DRVVBUS			((1 << 16) | 436)
+#define NX_TIEOFF_USB20OTG0_i_ADPCHRG			((1 << 16) | 437)
+#define NX_TIEOFF_USB20OTG0_i_ADPDISCHRG		((1 << 16) | 438)
+#define NX_TIEOFF_USB20OTG0_i_ADPPRBENB			((1 << 16) | 439)
+#define NX_TIEOFF_USB20OTG0_i_VBUSVLDEXT		((1 << 16) | 440)
+#define NX_TIEOFF_USB20OTG0_i_VBUSVLDEXTSEL		((1 << 16) | 441)
+#define NX_TIEOFF_USB20OTG0_i_DPPULLDOWN		((1 << 16) | 442)
+#define NX_TIEOFF_USB20OTG0_i_DMPULLDOWN		((1 << 16) | 443)
+#define NX_TIEOFF_USB20OTG0_i_SUSPENDM_ENB		((1 << 16) | 444)
+#define NX_TIEOFF_USB20OTG0_i_SUSPENDM			((1 << 16) | 445)
+#define NX_TIEOFF_USB20OTG0_i_SLEEPM_ENB		((1 << 16) | 446)
+#define NX_TIEOFF_USB20OTG0_i_SLEEPM			((1 << 16) | 447)
+#define NX_TIEOFF_USB20OTG0_i_OPMODE_ENB		((1 << 16) | 448)
+#define NX_TIEOFF_USB20OTG0_i_OPMODE			((2 << 16) | 449)
+#define NX_TIEOFF_USB20OTG0_i_TERMSEL_ENB		((1 << 16) | 451)
+#define NX_TIEOFF_USB20OTG0_i_TERMSEL			((1 << 16) | 452)
+#define NX_TIEOFF_USB20OTG0_i_XCVRSEL_ENB		((1 << 16) | 453)
+#define NX_TIEOFF_USB20OTG0_i_XCVRSEL			((2 << 16) | 454)
+#define NX_TIEOFF_USB20OTG0_i_WORDINTERFACE_ENB		((1 << 16) | 456)
+#define NX_TIEOFF_USB20OTG0_i_WORDINTERFACE		((1 << 16) | 457)
+#define NX_TIEOFF_USB20OTG0_i_TXBITSTUFFEN		((1 << 16) | 458)
+#define NX_TIEOFF_USB20OTG0_i_TXBITSTUFFENH		((1 << 16) | 459)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDPDATA		((1 << 16) | 460)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDMDATA		((1 << 16) | 461)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDPEN		((1 << 16) | 462)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDMEN		((1 << 16) | 463)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSSEL			((1 << 16) | 464)
+#define NX_TIEOFF_USB20OTG0_i_COMPDISTUNE		((3 << 16) | 465)
+#define NX_TIEOFF_USB20OTG0_i_SQRXTUNE			((3 << 16) | 468)
+#define NX_TIEOFF_USB20OTG0_i_OTGTUNE			((3 << 16) | 471)
+#define NX_TIEOFF_USB20OTG0_i_TXHSXVTUNE		((2 << 16) | 474)
+#define NX_TIEOFF_USB20OTG0_i_TXFSLSTUNE		((4 << 16) | 476)
+#define NX_TIEOFF_USB20OTG0_i_TXVREFTUNE		((4 << 16) | 480)
+#define NX_TIEOFF_USB20OTG0_i_TXRISETUNE		((2 << 16) | 484)
+#define NX_TIEOFF_USB20OTG0_i_TXRESTUNE			((2 << 16) | 486)
+#define NX_TIEOFF_USB20OTG0_i_TXPREEMPAMPTUNE		((2 << 16) | 488)
+#define NX_TIEOFF_USB20OTG0_i_TXPREEMPPULSETUNE		((1 << 16) | 490)
+#define NX_TIEOFF_USB20OTG0_i_CHRGSEL			((1 << 16) | 491)
+#define NX_TIEOFF_USB20OTG0_i_VDATDETENB		((1 << 16) | 492)
+#define NX_TIEOFF_USB20OTG0_i_VDATSRCENB		((1 << 16) | 493)
+#define NX_TIEOFF_USB20OTG0_i_DCDENB			((1 << 16) | 494)
+#define NX_TIEOFF_USB20OTG0_i_ACAENB			((1 << 16) | 495)
+#define NX_TIEOFF_USB20OTG0_i_IDPULLUP_ENB		((1 << 16) | 496)
+#define NX_TIEOFF_USB20OTG0_i_DPPULLDOWN_ENB		((1 << 16) | 497)
+#define NX_TIEOFF_USB20OTG0_i_DMPULLDOWN_ENB		((1 << 16) | 498)
+#define NX_TIEOFF_USB20OTG0_i_DRVVBUS_ENB		((1 << 16) | 499)
+#define NX_TIEOFF_USB20OTG0_i_LPMClkMuxCntrl		((1 << 16) | 500)
+#define NX_TIEOFF_USB20OTG0_i_GLITCHLESSMUXCntrl	((1 << 16) | 501)
+#define NX_TIEOFF_CODA9600_i_nPWRDN00			((4 << 16) | 502)
+#define NX_TIEOFF_CODA9600_i_nSLEEP00			((4 << 16) | 506)
+#define NX_TIEOFF_CODA9600_i_nPWRDN01			((8 << 16) | 512)
+#define NX_TIEOFF_CODA9600_i_nSLEEP01			((8 << 16) | 520)
+#define NX_TIEOFF_CODA9600_i_nPWRDN02			((10 << 16) | 528)
+#define NX_TIEOFF_CODA9600_i_nSLEEP02			((10 << 16) | 544)
+#define NX_TIEOFF_CODA9600_i_nPWRDN03			((2 << 16) | 554)
+#define NX_TIEOFF_CODA9600_i_nSLEEP03			((2 << 16) | 556)
+#define NX_TIEOFF_CODA9600_i_nPWRDN04			((8 << 16) | 558)
+#define NX_TIEOFF_CODA9600_i_nSLEEP04			((8 << 16) | 566)
+#define NX_TIEOFF_CODA9600_i_nPWRDN05			((3 << 16) | 576)
+#define NX_TIEOFF_CODA9600_i_nSLEEP05			((3 << 16) | 579)
+#define NX_TIEOFF_CODA9600_i_nPWRDN06			((7 << 16) | 582)
+#define NX_TIEOFF_CODA9600_i_nSLEEP06			((7 << 16) | 589)
+#define NX_TIEOFF_CODA9600_i_nPWRDN07			((12 << 16) | 596)
+#define NX_TIEOFF_CODA9600_i_nSLEEP07			((12 << 16) | 608)
+#define NX_TIEOFF_CODA9600_i_nPWRDN08			((1 << 16) | 620)
+#define NX_TIEOFF_CODA9600_i_nSLEEP08			((1 << 16) | 621)
+#define NX_TIEOFF_CODA9600_i_nPWRDN09			((2 << 16) | 622)
+#define NX_TIEOFF_CODA9600_i_nSLEEP09			((2 << 16) | 624)
+#define NX_TIEOFF_CODA9600_i_nPWRDN10			((10 << 16) | 626)
+#define NX_TIEOFF_CODA9600_i_nSLEEP10			((10 << 16) | 640)
+#define NX_TIEOFF_CODA9600_i_nPWRDN11			((1 << 16) | 650)
+#define NX_TIEOFF_CODA9600_i_nSLEEP11			((1 << 16) | 651)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2_EMAA		((3 << 16) | 652)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2_EMAB		((3 << 16) | 655)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2w_EMAA		((3 << 16) | 658)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2w_EMAB		((3 << 16) | 661)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAA		((3 << 16) | 664)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAB		((3 << 16) | 667)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAWA		((2 << 16) | 670)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAWB		((2 << 16) | 672)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAA		((3 << 16) | 674)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAB		((3 << 16) | 677)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAWA		((2 << 16) | 680)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAWB		((2 << 16) | 682)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1_EMA		((3 << 16) | 684)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1_EMAW		((2 << 16) | 687)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1w_EMA		((3 << 16) | 689)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1w_EMAW		((2 << 16) | 692)
+#define NX_TIEOFF_DWC_GMAC0_sbd_flowctrl_i		((1 << 16) | 694)
+#define NX_TIEOFF_DWC_GMAC0_phy_intf_sel_i		((3 << 16) | 695)
+#define NX_TIEOFF_DWC_GMAC0_i_NX_RF2_EMAA		((3 << 16) | 698)
+#define NX_TIEOFF_DWC_GMAC0_i_NX_RF2_EMAB		((3 << 16) | 701)
+#define NX_TIEOFF_MALI4000_NX_DPSRAM_1R1W_EMAA		((3 << 16) | 704)
+#define NX_TIEOFF_MALI4000_NX_DPSRAM_1R1W_EMAB		((3 << 16) | 707)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_EMA		((3 << 16) | 710)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_EMAW		((2 << 16) | 713)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_BW_EMA		((3 << 16) | 715)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_BW_EMAW		((2 << 16) | 718)
+#define NX_TIEOFF_MALI4000_PWRDNBYPASS			((1 << 16) | 720)
+#define NX_TIEOFF_MALI4000_GP_NX_NPOWERDOWN		((15 << 16) | 721)
+#define NX_TIEOFF_MALI4000_GP_NX_NSLEEP			((15 << 16) | 736)
+#define NX_TIEOFF_MALI4000_L2_NX_NPOWERDOWN		((3 << 16) | 751)
+#define NX_TIEOFF_MALI4000_L2_NX_NSLEEP			((3 << 16) | 754)
+#define NX_TIEOFF_MALI4000_PP0_NX_NPOWERDOWN		((32 << 16) | 768)
+#define NX_TIEOFF_MALI4000_PP0_NX_NSLEEP		((32 << 16) | 800)
+#define NX_TIEOFF_MALI4000_PP1_NX_NPOWERDOWN		((32 << 16) | 832)
+#define NX_TIEOFF_MALI4000_PP1_NX_NSLEEP		((32 << 16) | 864)
+#define NX_TIEOFF_MALI4000_PP2_NX_NPOWERDOWN		((32 << 16) | 896)
+#define NX_TIEOFF_MALI4000_PP2_NX_NSLEEP		((32 << 16) | 928)
+#define NX_TIEOFF_MALI4000_PP3_NX_NPOWERDOWN		((32 << 16) | 960)
+#define NX_TIEOFF_MALI4000_PP3_NX_NSLEEP		((32 << 16) | 992)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm9	((1 << 16) | 1024)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm10	((1 << 16) | 1025)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm16	((1 << 16) | 1026)
+#define NX_TIEOFF_A3BM_AXI_TOP_MASTER_BUS0_REMAP	((2 << 16) | 1027)
+#if defined(CONFIG_ARCH_S5P6818)
+#define NX_TIEOFF_Inst_ARMTOP_SMPEN			((4 << 16) | 2816)
+#define NX_TIEOFF_Inst_ARMTOP_STANBYWFI			((4 << 16) | 2880)
+#define NX_TIEOFF_Inst_ARMTOP_STANBYWFIL2		((1 << 16) | 2884)
+#define NX_TIEOFF_Inst_ARMTOP_DBGNOPWRDWN		((4 << 16) | 2889)
+#define NX_TIEOFF_Inst_ARMTOP_DBGPWRUPREQ		((4 << 16) | 2893)
+#define NX_TIEOFF_Inst_ARMTOP_COREPWRDOWNPRE		((1 << 16) | 2901)
+#define NX_TIEOFF_Inst_ARMTOP_CPU0PWRDOWNPRE		((1 << 16) | 2902)
+#define NX_TIEOFF_Inst_ARMTOP_CPU1PWRDOWNPRE		((1 << 16) | 2903)
+#define NX_TIEOFF_Inst_ARMTOP_CPU2PWRDOWNPRE		((1 << 16) | 2904)
+#define NX_TIEOFF_Inst_ARMTOP_CPU3PWRDOWNPRE		((1 << 16) | 2905)
+#define NX_TIEOFF_Inst_ARMTOP_COREPWRDOWNALL		((1 << 16) | 2906)
+#define NX_TIEOFF_Inst_ARMTOP_CPU0PWRDOWNALL		((1 << 16) | 2907)
+#define NX_TIEOFF_Inst_ARMTOP_CPU1PWRDOWNALL		((1 << 16) | 2908)
+#define NX_TIEOFF_Inst_ARMTOP_CPU2PWRDOWNALL		((1 << 16) | 2909)
+#define NX_TIEOFF_Inst_ARMTOP_CPU3PWRDOWNALL		((1 << 16) | 2910)
+#define NX_TIEOFF_Inst_ARMTOP_CLAMPL2			((1 << 16) | 2920)
+#define NX_TIEOFF_Inst_ARMTOP_L2FLUSHREQ		((1 << 16) | 3018)
+#define NX_TIEOFF_Inst_ARMTOP_L2FLUSHDONE		((1 << 16) | 3019)
+#define NX_TIEOFF_Inst_ARMTOP_ACINACTM			((1 << 16) | 3023)
+#define NX_TIEOFF_Inst_ARMTOP_P1_SMPEN			((4 << 16) | 3360)
+#define NX_TIEOFF_Inst_ARMTOP_P1_STANBYWFI		((4 << 16) | 3424)
+#define NX_TIEOFF_Inst_ARMTOP_P1_STANBYWFIL2		((1 << 16) | 3428)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGNOPWRDWN		((4 << 16) | 3442)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGPWRUPREQ		((4 << 16) | 3443)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGPWRDUP		((4 << 16) | 3444)
+#define NX_TIEOFF_Inst_ARMTOP_P1_COREPWRDOWNPRE		((1 << 16) | 3445)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU0PWRDOWNPRE		((1 << 16) | 3446)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU1PWRDOWNPRE		((1 << 16) | 3447)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU2PWRDOWNPRE		((1 << 16) | 3448)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU3PWRDOWNPRE		((1 << 16) | 3449)
+#define NX_TIEOFF_Inst_ARMTOP_P1_COREPWRDOWNALL		((1 << 16) | 3450)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU0PWRDOWNALL		((1 << 16) | 3451)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU1PWRDOWNALL		((1 << 16) | 3452)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU2PWRDOWNALL		((1 << 16) | 3453)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU3PWRDOWNALL		((1 << 16) | 3454)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CLAMPL2		((1 << 16) | 3464)
+#define NX_TIEOFF_Inst_ARMTOP_P1_L2FLUSHREQ		((1 << 16) | 3562)
+#define NX_TIEOFF_Inst_ARMTOP_P1_L2FLUSHDONE		((1 << 16) | 3563)
+#define NX_TIEOFF_Inst_ARMTOP_P1_ACINACTM		((1 << 16) | 3567)
+#endif
+
+#endif /* _NEXELL_TIEOFF_H */
diff --git a/roms/u-boot/arch/arm/mach-nexell/nx_gpio.c b/roms/u-boot/arch/arm/mach-nexell/nx_gpio.c
new file mode 100644
index 000000000..dfba3a237
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/nx_gpio.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <ybpark@nexell.co.kr>
+ */
+
+/*
+ * FIXME : will be remove after support pinctrl
+ */
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include "asm/arch/nx_gpio.h"
+#define NUMBER_OF_GPIO_MODULE 5
+u32 __g_nx_gpio_valid_bit[NUMBER_OF_GPIO_MODULE] = {
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF};
+
+static struct {
+	struct nx_gpio_register_set *pregister;
+} __g_module_variables[NUMBER_OF_GPIO_MODULE] = {
+	{ (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOA },
+	{ (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOB },
+	{ (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOC },
+	{ (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOD },
+	{ (struct nx_gpio_register_set *)PHY_BASEADDR_GPIOE },
+};
+
+enum { nx_gpio_max_bit = 32 };
+
+void nx_gpio_set_bit(u32 *value, u32 bit, int enable)
+{
+	register u32 newvalue;
+
+	newvalue = *value;
+	newvalue &= ~(1ul << bit);
+	newvalue |= (u32)enable << bit;
+	writel(newvalue, value);
+}
+
+int nx_gpio_get_bit(u32 value, u32 bit)
+{
+	return (int)((value >> bit) & (1ul));
+}
+
+void nx_gpio_set_bit2(u32 *value, u32 bit, u32 bit_value)
+{
+	register u32 newvalue = *value;
+
+	newvalue = (u32)(newvalue & ~(3ul << (bit * 2)));
+	newvalue = (u32)(newvalue | (bit_value << (bit * 2)));
+
+	writel(newvalue, value);
+}
+
+u32 nx_gpio_get_bit2(u32 value, u32 bit)
+{
+	return (u32)((u32)(value >> (bit * 2)) & 3ul);
+}
+
+int nx_gpio_initialize(void)
+{
+	static int binit;
+	u32 i;
+
+	binit = 0;
+
+	if (binit == 0) {
+		for (i = 0; i < NUMBER_OF_GPIO_MODULE; i++)
+			__g_module_variables[i].pregister = NULL;
+		binit = true;
+	}
+	for (i = 0; i < NUMBER_OF_GPIO_MODULE; i++) {
+		__g_nx_gpio_valid_bit[i] = 0xFFFFFFFF;
+	};
+	return true;
+}
+
+u32 nx_gpio_get_number_of_module(void)
+{
+	return NUMBER_OF_GPIO_MODULE;
+}
+
+u32 nx_gpio_get_size_of_register_set(void)
+{
+	return sizeof(struct nx_gpio_register_set);
+}
+
+void nx_gpio_set_base_address(u32 module_index, void *base_address)
+{
+	__g_module_variables[module_index].pregister =
+		(struct nx_gpio_register_set *)base_address;
+}
+
+void *nx_gpio_get_base_address(u32 module_index)
+{
+	return (void *)__g_module_variables[module_index].pregister;
+}
+
+int nx_gpio_open_module(u32 module_index)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	writel(0xFFFFFFFF, &pregister->gpiox_slew_disable_default);
+	writel(0xFFFFFFFF, &pregister->gpiox_drv1_disable_default);
+	writel(0xFFFFFFFF, &pregister->gpiox_drv0_disable_default);
+	writel(0xFFFFFFFF, &pregister->gpiox_pullsel_disable_default);
+	writel(0xFFFFFFFF, &pregister->gpiox_pullenb_disable_default);
+	return true;
+}
+
+int nx_gpio_close_module(u32 module_index) { return true; }
+
+int nx_gpio_check_busy(u32 module_index) { return false; }
+
+void nx_gpio_set_pad_function(u32 module_index, u32 bit_number,
+			      u32 padfunc)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	nx_gpio_set_bit2(&pregister->gpioxaltfn[bit_number / 16],
+			 bit_number % 16, padfunc);
+}
+
+void nx_gpio_set_pad_function32(u32 module_index, u32 msbvalue, u32 lsbvalue)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	writel(lsbvalue, &pregister->gpioxaltfn[0]);
+	writel(msbvalue, &pregister->gpioxaltfn[1]);
+}
+
+int nx_gpio_get_pad_function(u32 module_index, u32 bit_number)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	return (int)nx_gpio_get_bit2
+		(readl(&pregister->gpioxaltfn[bit_number / 16]),
+		 bit_number % 16);
+}
+
+void nx_gpio_set_output_enable(u32 module_index, u32 bit_number,
+			       int output_enb)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	nx_gpio_set_bit(&pregister->gpioxoutenb, bit_number, output_enb);
+}
+
+int nx_gpio_get_detect_enable(u32 module_index, u32 bit_number)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	return nx_gpio_get_bit(readl(&pregister->gpioxdetenb), bit_number);
+}
+
+u32 nx_gpio_get_detect_enable32(u32 module_index)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	return readl(&pregister->gpioxdetenb);
+}
+
+void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number,
+			       int detect_enb)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	nx_gpio_set_bit(&pregister->gpioxdetenb, bit_number, detect_enb);
+}
+
+void nx_gpio_set_detect_enable32(u32 module_index, u32 enable_flag)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	writel(enable_flag, &pregister->gpioxdetenb);
+}
+
+int nx_gpio_get_output_enable(u32 module_index, u32 bit_number)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	return nx_gpio_get_bit(readl(&pregister->gpioxoutenb), bit_number);
+}
+
+void nx_gpio_set_output_enable32(u32 module_index, int output_enb)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	if (output_enb)
+		writel(0xFFFFFFFF, &pregister->gpioxoutenb);
+	else
+		writel(0x0, &pregister->gpioxoutenb);
+}
+
+u32 nx_gpio_get_output_enable32(u32 module_index)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	return readl(&pregister->gpioxoutenb);
+}
+
+void nx_gpio_set_output_value(u32 module_index, u32 bit_number, int value)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	nx_gpio_set_bit(&pregister->gpioxout, bit_number, value);
+}
+
+int nx_gpio_get_output_value(u32 module_index, u32 bit_number)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	return nx_gpio_get_bit(readl(&pregister->gpioxout), bit_number);
+}
+
+void nx_gpio_set_output_value32(u32 module_index, u32 value)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	writel(value, &pregister->gpioxout);
+}
+
+u32 nx_gpio_get_output_value32(u32 module_index)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	return readl(&pregister->gpioxout);
+}
+
+int nx_gpio_get_input_value(u32 module_index, u32 bit_number)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	return nx_gpio_get_bit(readl(&pregister->gpioxpad), bit_number);
+}
+
+void nx_gpio_set_pull_select(u32 module_index, u32 bit_number, int enable)
+{
+	nx_gpio_set_bit(&__g_module_variables[module_index]
+			.pregister->gpiox_pullsel_disable_default,
+			bit_number, true);
+	nx_gpio_set_bit
+		(&__g_module_variables[module_index].pregister->gpiox_pullsel,
+		 bit_number, enable);
+}
+
+void nx_gpio_set_pull_select32(u32 module_index, u32 value)
+{
+	writel(value,
+	       &__g_module_variables[module_index].pregister->gpiox_pullsel);
+}
+
+int nx_gpio_get_pull_select(u32 module_index, u32 bit_number)
+{
+	return nx_gpio_get_bit
+		(__g_module_variables[module_index].pregister->gpiox_pullsel,
+		 bit_number);
+}
+
+u32 nx_gpio_get_pull_select32(u32 module_index)
+{
+	return __g_module_variables[module_index].pregister->gpiox_pullsel;
+}
+
+void nx_gpio_set_pull_mode(u32 module_index, u32 bit_number, u32 mode)
+{
+	nx_gpio_set_bit(&__g_module_variables[module_index]
+			.pregister->gpiox_pullsel_disable_default,
+			bit_number, true);
+	nx_gpio_set_bit(&__g_module_variables[module_index]
+			.pregister->gpiox_pullenb_disable_default,
+			bit_number, true);
+	if (mode == nx_gpio_pull_off) {
+		nx_gpio_set_bit
+		 (&__g_module_variables[module_index].pregister->gpiox_pullenb,
+		 bit_number, false);
+		nx_gpio_set_bit
+		 (&__g_module_variables[module_index].pregister->gpiox_pullsel,
+		 bit_number, false);
+	} else {
+		nx_gpio_set_bit
+		 (&__g_module_variables[module_index].pregister->gpiox_pullsel,
+		 bit_number, (mode & 1 ? true : false));
+		nx_gpio_set_bit
+		 (&__g_module_variables[module_index].pregister->gpiox_pullenb,
+		 bit_number, true);
+	}
+}
+
+void nx_gpio_set_fast_slew(u32 module_index, u32 bit_number,
+			   int enable)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	nx_gpio_set_bit(&pregister->gpiox_slew, bit_number,
+			(int)(!enable));
+}
+
+void nx_gpio_set_drive_strength(u32 module_index, u32 bit_number,
+				u32 drvstrength)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	nx_gpio_set_bit(&pregister->gpiox_drv1, bit_number,
+			(int)(((u32)drvstrength >> 0) & 0x1));
+	nx_gpio_set_bit(&pregister->gpiox_drv0, bit_number,
+			(int)(((u32)drvstrength >> 1) & 0x1));
+}
+
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+						u32 bit_number, int enable)
+{
+	register struct nx_gpio_register_set *pregister;
+
+	pregister = __g_module_variables[module_index].pregister;
+	nx_gpio_set_bit(&pregister->gpiox_drv1_disable_default, bit_number,
+			(int)(enable));
+	nx_gpio_set_bit(&pregister->gpiox_drv0_disable_default, bit_number,
+			(int)(enable));
+}
+
+u32 nx_gpio_get_drive_strength(u32 module_index, u32 bit_number)
+{
+	register struct nx_gpio_register_set *pregister;
+	register u32 retvalue;
+
+	pregister = __g_module_variables[module_index].pregister;
+	retvalue =
+		nx_gpio_get_bit(readl(&pregister->gpiox_drv0), bit_number) << 1;
+	retvalue |=
+		nx_gpio_get_bit(readl(&pregister->gpiox_drv1), bit_number) << 0;
+	return retvalue;
+}
diff --git a/roms/u-boot/arch/arm/mach-nexell/nx_sec_reg.c b/roms/u-boot/arch/arm/mach-nexell/nx_sec_reg.c
new file mode 100644
index 000000000..3d3dd9fd8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/nx_sec_reg.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park@nexell.co.kr>
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/sec_reg.h>
+#include <linux/linkage.h>
+
+#define NEXELL_SMC_BASE			0x82000000
+
+#define NEXELL_SMC_FN(n)		(NEXELL_SMC_BASE +  (n))
+
+#define NEXELL_SMC_SEC_REG_WRITE	NEXELL_SMC_FN(0x0)
+#define NEXELL_SMC_SEC_REG_READ		NEXELL_SMC_FN(0x1)
+
+#define SECURE_ID_SHIFT			8
+
+#define SEC_4K_OFFSET			((4 * 1024) - 1)
+#define SEC_64K_OFFSET			((64 * 1024) - 1)
+
+asmlinkage int __invoke_nexell_fn_smc(u32, u32, u32, u32);
+
+int write_sec_reg_by_id(void __iomem *reg, int val, int id)
+{
+	int ret = 0;
+	u32 off = 0;
+
+	switch (id) {
+	case NEXELL_L2C_SEC_ID:
+	case NEXELL_MIPI_SEC_ID:
+	case NEXELL_TOFF_SEC_ID:
+		off = (u32)reg & SEC_4K_OFFSET;
+		break;
+	case NEXELL_MALI_SEC_ID:
+		off = (u32)reg & SEC_64K_OFFSET;
+		break;
+	}
+	ret = __invoke_nexell_fn_smc(NEXELL_SMC_SEC_REG_WRITE |
+			((1 << SECURE_ID_SHIFT) + id), off, val, 0);
+	return ret;
+}
+
+int read_sec_reg_by_id(void __iomem *reg, int id)
+{
+	int ret = 0;
+	u32 off = 0;
+
+	switch (id) {
+	case NEXELL_L2C_SEC_ID:
+	case NEXELL_MIPI_SEC_ID:
+	case NEXELL_TOFF_SEC_ID:
+		off = (u32)reg & SEC_4K_OFFSET;
+		break;
+	case NEXELL_MALI_SEC_ID:
+		off = (u32)reg & SEC_64K_OFFSET;
+		break;
+	}
+	ret = __invoke_nexell_fn_smc(NEXELL_SMC_SEC_REG_READ |
+			((1 << SECURE_ID_SHIFT) + id), off, 0, 0);
+	return ret;
+}
+
+int write_sec_reg(void __iomem *reg, int val)
+{
+	int ret = 0;
+
+	ret = __invoke_nexell_fn_smc(NEXELL_SMC_SEC_REG_WRITE,
+				     (u32)reg, val, 0);
+	return ret;
+}
+
+int read_sec_reg(void __iomem *reg)
+{
+	int ret = 0;
+
+	ret = __invoke_nexell_fn_smc(NEXELL_SMC_SEC_REG_READ, (u32)reg, 0, 0);
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/mach-nexell/reg-call.S b/roms/u-boot/arch/arm/mach-nexell/reg-call.S
new file mode 100644
index 000000000..5fdf51520
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/reg-call.S
@@ -0,0 +1,23 @@
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
+#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
+
+#define ___opcode_identity32(x) ((u32)(x))
+#define ___inst_arm(x) .long x
+#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
+
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+
+#define __SMC(imm4) __inst_arm_thumb32(                                 \
+        0xE1600070 | (((imm4) & 0xF) << 0),                             \
+        0xF7F08000 | (((imm4) & 0xF) << 16)                             \
+)
+
+ENTRY(__invoke_nexell_fn_smc)
+	__SMC(0)
+	bx      lr
+ENDPROC(__invoke_nexell_fn_smc)
diff --git a/roms/u-boot/arch/arm/mach-nexell/reset.c b/roms/u-boot/arch/arm/mach-nexell/reset.c
new file mode 100644
index 000000000..1f732a3d3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/reset.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park@nexell.co.kr>
+ */
+
+/*
+ *FIXME : Not support device tree & reset control driver.
+ *        will remove after support device tree & reset control driver.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/reset.h>
+
+struct	nx_rstcon_registerset {
+	u32	regrst[(NUMBER_OF_RESET_MODULE_PIN + 31) >> 5];
+};
+
+static struct nx_rstcon_registerset *nx_rstcon =
+			(struct nx_rstcon_registerset *)PHY_BASEADDR_RSTCON;
+
+void nx_rstcon_setrst(u32 rstindex, enum rstcon status)
+{
+	u32 regnum, bitpos, curstat;
+
+	regnum		= rstindex >> 5;
+	curstat		= (u32)readl(&nx_rstcon->regrst[regnum]);
+	bitpos		= rstindex & 0x1f;
+	curstat		&= ~(1UL << bitpos);
+	curstat		|= (status & 0x01) << bitpos;
+	writel(curstat, &nx_rstcon->regrst[regnum]);
+}
diff --git a/roms/u-boot/arch/arm/mach-nexell/tieoff.c b/roms/u-boot/arch/arm/mach-nexell/tieoff.c
new file mode 100644
index 000000000..5a4744c29
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/tieoff.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park@nexell.co.kr>
+ */
+
+#include <common.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/reset.h>
+#include <asm/arch/nx_gpio.h>
+#include <asm/arch/tieoff.h>
+#include <asm/arch/sec_reg.h>
+
+#define	NX_PIN_FN_SIZE	4
+#define TIEOFF_REG_NUM 33
+
+struct	nx_tieoff_registerset {
+	u32	tieoffreg[TIEOFF_REG_NUM];
+};
+
+static struct nx_tieoff_registerset *nx_tieoff = (void *)PHY_BASEADDR_TIEOFF;
+
+static int tieoff_readl(void __iomem *reg)
+{
+	if (IS_ENABLED(CONFIG_ARCH_S5P4418))
+		return read_sec_reg_by_id(reg, NEXELL_TOFF_SEC_ID);
+	else
+		return readl(reg);
+}
+
+static int  tieoff_writetl(void __iomem *reg, int val)
+{
+	if (IS_ENABLED(CONFIG_ARCH_S5P4418))
+		return write_sec_reg_by_id(reg, val, NEXELL_TOFF_SEC_ID);
+	else
+		return writel(val, reg);
+}
+
+void nx_tieoff_set(u32 tieoff_index, u32 tieoff_value)
+{
+	u32 regindex, mask;
+	u32 lsb, msb;
+	u32 regval;
+
+	u32 position;
+	u32 bitwidth;
+
+	position = tieoff_index & 0xffff;
+	bitwidth = (tieoff_index >> 16) & 0xffff;
+
+	regindex	= position >> 5;
+
+	lsb = position & 0x1F;
+	msb = lsb + bitwidth;
+
+	if (msb > 32) {
+		msb &= 0x1F;
+		mask   = ~(0xffffffff << lsb);
+		regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+		regval |= ((tieoff_value & ((1UL << bitwidth) - 1)) << lsb);
+		tieoff_writetl(&nx_tieoff->tieoffreg[regindex], regval);
+
+		mask   = (0xffffffff << msb);
+		regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+		regval |= ((tieoff_value & ((1UL << bitwidth) - 1)) >> msb);
+		tieoff_writetl(&nx_tieoff->tieoffreg[regindex + 1], regval);
+	} else	{
+		mask	= (0xffffffff << msb) | (~(0xffffffff << lsb));
+		regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+		regval	|= ((tieoff_value & ((1UL << bitwidth) - 1)) << lsb);
+		tieoff_writetl(&nx_tieoff->tieoffreg[regindex], regval);
+	}
+}
+
+u32 nx_tieoff_get(u32 tieoff_index)
+{
+	u32 regindex, mask;
+	u32 lsb, msb;
+	u32 regval;
+
+	u32 position;
+	u32 bitwidth;
+
+	position = tieoff_index & 0xffff;
+	bitwidth = (tieoff_index >> 16) & 0xffff;
+
+	regindex = position / 32;
+	lsb = position % 32;
+	msb = lsb + bitwidth;
+
+	if (msb > 32) {
+		msb &= 0x1F;
+		mask   = 0xffffffff << lsb;
+		regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+		regval >>= lsb;
+
+		mask   = ~(0xffffffff << msb);
+		regval |= ((tieoff_readl(&nx_tieoff->tieoffreg[regindex + 1])
+					& mask) << (32 - lsb));
+	} else	{
+		mask   = ~(0xffffffff << msb) & (0xffffffff << lsb);
+		regval = tieoff_readl(&nx_tieoff->tieoffreg[regindex]) & mask;
+		regval >>= lsb;
+	}
+	return regval;
+}
diff --git a/roms/u-boot/arch/arm/mach-nexell/timer.c b/roms/u-boot/arch/arm/mach-nexell/timer.c
new file mode 100644
index 000000000..3b311fd22
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-nexell/timer.c
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung@nexell.co.kr>
+ */
+
+#include <common.h>
+#include <log.h>
+
+#include <asm/io.h>
+#include <asm/arch/nexell.h>
+#include <asm/arch/clk.h>
+#if defined(CONFIG_ARCH_S5P4418)
+#include <asm/arch/reset.h>
+#endif
+
+#if (CONFIG_TIMER_SYS_TICK_CH > 3)
+#error Not support timer channel. Please use "0~3" channels.
+#endif
+
+/* global variables to save timer count
+ *
+ * Section ".data" must be used because BSS is not available before relocation,
+ * in board_init_f(), respectively! I.e. global variables can not be used!
+ */
+static unsigned long timestamp __section(".data");
+static unsigned long lastdec __section(".data");
+static int	timerinit __section(".data");
+
+/* macro to hw timer tick config */
+static long	TIMER_FREQ  = 1000000;
+static long	TIMER_HZ    = 1000000 / CONFIG_SYS_HZ;
+static long	TIMER_COUNT = 0xFFFFFFFF;
+
+#define	REG_TCFG0			(0x00)
+#define	REG_TCFG1			(0x04)
+#define	REG_TCON			(0x08)
+#define	REG_TCNTB0			(0x0C)
+#define	REG_TCMPB0			(0x10)
+#define	REG_TCNT0			(0x14)
+#define	REG_CSTAT			(0x44)
+
+#define	TCON_BIT_AUTO			(1 << 3)
+#define	TCON_BIT_INVT			(1 << 2)
+#define	TCON_BIT_UP			(1 << 1)
+#define	TCON_BIT_RUN			(1 << 0)
+#define TCFG0_BIT_CH(ch)		((ch) == 0 || (ch) == 1 ? 0 : 8)
+#define TCFG1_BIT_CH(ch)		((ch) * 4)
+#define TCON_BIT_CH(ch)			((ch) ? (ch) * 4  + 4 : 0)
+#define TINT_CH(ch)			(ch)
+#define TINT_CSTAT_BIT_CH(ch)		((ch) + 5)
+#define	TINT_CSTAT_MASK			(0x1F)
+#define TIMER_TCNT_OFFS			(0xC)
+
+void reset_timer_masked(void);
+unsigned long get_timer_masked(void);
+
+/*
+ * Timer HW
+ */
+static inline void timer_clock(void __iomem *base, int ch, int mux, int scl)
+{
+	u32 val = readl(base + REG_TCFG0) & ~(0xFF << TCFG0_BIT_CH(ch));
+
+	writel(val | ((scl - 1) << TCFG0_BIT_CH(ch)), base + REG_TCFG0);
+	val = readl(base + REG_TCFG1) & ~(0xF << TCFG1_BIT_CH(ch));
+	writel(val | (mux << TCFG1_BIT_CH(ch)), base + REG_TCFG1);
+}
+
+static inline void timer_count(void __iomem *base, int ch, unsigned int cnt)
+{
+	writel((cnt - 1), base + REG_TCNTB0 + (TIMER_TCNT_OFFS * ch));
+	writel((cnt - 1), base + REG_TCMPB0 + (TIMER_TCNT_OFFS * ch));
+}
+
+static inline void timer_start(void __iomem *base, int ch)
+{
+	int on = 0;
+	u32 val = readl(base + REG_CSTAT) & ~(TINT_CSTAT_MASK << 5 | 0x1 << ch);
+
+	writel(val | (0x1 << TINT_CSTAT_BIT_CH(ch) | on << ch),
+	       base + REG_CSTAT);
+	val = readl(base + REG_TCON) & ~(0xE << TCON_BIT_CH(ch));
+	writel(val | (TCON_BIT_UP << TCON_BIT_CH(ch)), base + REG_TCON);
+
+	val &= ~(TCON_BIT_UP << TCON_BIT_CH(ch));
+	val |= ((TCON_BIT_AUTO | TCON_BIT_RUN) << TCON_BIT_CH(ch));
+	writel(val, base + REG_TCON);
+	dmb();
+}
+
+static inline void timer_stop(void __iomem *base, int ch)
+{
+	int on = 0;
+	u32 val = readl(base + REG_CSTAT) & ~(TINT_CSTAT_MASK << 5 | 0x1 << ch);
+
+	writel(val | (0x1 << TINT_CSTAT_BIT_CH(ch) | on << ch),
+	       base + REG_CSTAT);
+	val = readl(base + REG_TCON) & ~(TCON_BIT_RUN << TCON_BIT_CH(ch));
+	writel(val, base + REG_TCON);
+}
+
+static inline unsigned long timer_read(void __iomem *base, int ch)
+{
+	unsigned long ret;
+
+	ret = TIMER_COUNT - readl(base + REG_TCNT0 + (TIMER_TCNT_OFFS * ch));
+	return ret;
+}
+
+int timer_init(void)
+{
+	struct clk *clk = NULL;
+	char name[16] = "pclk";
+	int ch = CONFIG_TIMER_SYS_TICK_CH;
+	unsigned long rate, tclk = 0;
+	unsigned long mout, thz, cmp = -1UL;
+	int tcnt, tscl = 0, tmux = 0;
+	int mux = 0, scl = 0;
+	void __iomem *base = (void __iomem *)PHY_BASEADDR_TIMER;
+
+	if (timerinit)
+		return 0;
+
+	/* get with PCLK */
+	clk  = clk_get(name);
+	rate = clk_get_rate(clk);
+	for (mux = 0; mux < 5; mux++) {
+		mout = rate / (1 << mux), scl = mout / TIMER_FREQ,
+		thz = mout / scl;
+		if (!(mout % TIMER_FREQ) && 256 > scl) {
+			tclk = thz, tmux = mux, tscl = scl;
+			break;
+		}
+		if (scl > 256)
+			continue;
+		if (abs(thz - TIMER_FREQ) >= cmp)
+			continue;
+		tclk = thz, tmux = mux, tscl = scl;
+		cmp = abs(thz - TIMER_FREQ);
+	}
+	tcnt = tclk;	/* Timer Count := 1 Mhz counting */
+
+	TIMER_FREQ = tcnt;	/* Timer Count := 1 Mhz counting */
+	TIMER_HZ = TIMER_FREQ / CONFIG_SYS_HZ;
+	tcnt = TIMER_COUNT == 0xFFFFFFFF ? TIMER_COUNT + 1 : tcnt;
+
+	timer_stop(base, ch);
+	timer_clock(base, ch, tmux, tscl);
+	timer_count(base, ch, tcnt);
+	timer_start(base, ch);
+
+	reset_timer_masked();
+	timerinit = 1;
+
+	return 0;
+}
+
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+unsigned long get_timer(unsigned long base)
+{
+	long ret;
+	unsigned long time = get_timer_masked();
+	unsigned long hz = TIMER_HZ;
+
+	ret = time / hz - base;
+	return ret;
+}
+
+void set_timer(unsigned long t)
+{
+	timestamp = (unsigned long)t;
+}
+
+void reset_timer_masked(void)
+{
+	void __iomem *base = (void __iomem *)PHY_BASEADDR_TIMER;
+	int ch = CONFIG_TIMER_SYS_TICK_CH;
+
+	/* reset time */
+	/* capure current decrementer value time */
+	lastdec = timer_read(base, ch);
+	/* start "advancing" time stamp from 0 */
+	timestamp = 0;
+}
+
+unsigned long get_timer_masked(void)
+{
+	void __iomem *base = (void __iomem *)PHY_BASEADDR_TIMER;
+	int ch = CONFIG_TIMER_SYS_TICK_CH;
+
+	unsigned long now = timer_read(base, ch); /* current tick value */
+
+	if (now >= lastdec) {			  /* normal mode (non roll) */
+		/* move stamp fordward with absolute diff ticks */
+		timestamp += now - lastdec;
+	} else {
+		/* we have overflow of the count down timer */
+		/* nts = ts + ld + (TLV - now)
+		 * ts=old stamp, ld=time that passed before passing through -1
+		 * (TLV-now) amount of time after passing though -1
+		 * nts = new "advancing time stamp"...
+		 * it could also roll and cause problems.
+		 */
+		timestamp += now + TIMER_COUNT - lastdec;
+	}
+	/* save last */
+	lastdec = now;
+
+	debug("now=%lu, last=%lu, timestamp=%lu\n", now, lastdec, timestamp);
+	return (unsigned long)timestamp;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned long tmo, tmp;
+
+	debug("+udelay=%ld\n", usec);
+
+	if (!timerinit)
+		timer_init();
+
+	/* if "big" number, spread normalization to seconds */
+	if (usec >= 1000) {
+		/* start to normalize for usec to ticks per sec */
+		tmo  = usec / 1000;
+		/* find number of "ticks" to wait to achieve target */
+		tmo *= TIMER_FREQ;
+		/* finish normalize. */
+		tmo /= 1000;
+	/* else small number, don't kill it prior to HZ multiply */
+	} else {
+		tmo = usec * TIMER_FREQ;
+		tmo /= (1000 * 1000);
+	}
+
+	tmp = get_timer_masked();	/* get current timestamp */
+	debug("A. tmo=%ld, tmp=%ld\n", tmo, tmp);
+
+	/* if setting this fordward will roll time stamp */
+	if (tmp > (tmo + tmp + 1))
+		/* reset "advancing" timestamp to 0, set lastdec value */
+		reset_timer_masked();
+	else
+		/* set advancing stamp wake up time */
+		tmo += tmp;
+
+	debug("B. tmo=%ld, tmp=%ld\n", tmo, tmp);
+
+	/* loop till event */
+	do {
+		tmp = get_timer_masked();
+	} while (tmo > tmp);
+	debug("-udelay=%ld\n", usec);
+}
+
+void udelay_masked(unsigned long usec)
+{
+	unsigned long tmo, endtime;
+	signed long diff;
+
+	/* if "big" number, spread normalization to seconds */
+	if (usec >= 1000) {
+		/* start to normalize for usec to ticks per sec */
+		tmo = usec / 1000;
+		/* find number of "ticks" to wait to achieve target */
+		tmo *= TIMER_FREQ;
+		/* finish normalize. */
+		tmo /= 1000;
+	} else { /* else small number, don't kill it prior to HZ multiply */
+		tmo = usec * TIMER_FREQ;
+		tmo /= (1000 * 1000);
+	}
+
+	endtime = get_timer_masked() + tmo;
+
+	do {
+		unsigned long now = get_timer_masked();
+
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+unsigned long long get_ticks(void)
+{
+	return get_timer_masked();
+}
+
+#if defined(CONFIG_ARCH_S5P4418)
+ulong get_tbclk(void)
+{
+	ulong  tbclk = TIMER_FREQ;
+	return tbclk;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-octeontx/Kconfig b/roms/u-boot/arch/arm/mach-octeontx/Kconfig
new file mode 100644
index 000000000..28ecf9821
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx/Kconfig
@@ -0,0 +1,23 @@
+if ARCH_OCTEONTX
+
+choice
+	prompt "OcteonTX board select"
+	optional
+
+config TARGET_OCTEONTX_81XX
+	bool "Marvell OcteonTX CN81XX"
+
+config TARGET_OCTEONTX_83XX
+	bool "Marvell OcteonTX CN83XX"
+
+endchoice
+
+config SYS_SOC
+	string
+	default "octeontx"
+
+config SYS_PCI_64BIT
+	bool
+	default y
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-octeontx/Makefile b/roms/u-boot/arch/arm/mach-octeontx/Makefile
new file mode 100644
index 000000000..20cb48ad9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx/Makefile
@@ -0,0 +1,9 @@
+#/* SPDX-License-Identifier:    GPL-2.0
+# *
+# * Copyright (C) 2018 Marvell International Ltd.
+# *
+# * https://spdx.org/licenses
+# */
+
+obj-y += lowlevel_init.o clock.o cpu.o
+
diff --git a/roms/u-boot/arch/arm/mach-octeontx/clock.c b/roms/u-boot/arch/arm/mach-octeontx/clock.c
new file mode 100644
index 000000000..9da21077e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx/clock.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier:    GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+#include <asm/arch/clock.h>
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void)
+{
+	union rst_boot rst_boot;
+
+	rst_boot.u = readq(RST_BOOT);
+
+	return rst_boot.s.pnr_mul * PLL_REF_CLK;
+}
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void)
+{
+	union rst_boot rst_boot;
+
+	rst_boot.u = readq(RST_BOOT);
+
+	return rst_boot.s.c_mul * PLL_REF_CLK;
+}
diff --git a/roms/u-boot/arch/arm/mach-octeontx/cpu.c b/roms/u-boot/arch/arm/mach-octeontx/cpu.c
new file mode 100644
index 000000000..7bd74fe4f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx/cpu.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier:    GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define OTX_MEM_MAP_USED 3
+
+/* 1 for 83xx, +1 is end of list which needs to be empty */
+#define OTX_MEM_MAP_MAX (OTX_MEM_MAP_USED + 1 + CONFIG_NR_DRAM_BANKS + 1)
+
+static struct mm_region otx_mem_map[OTX_MEM_MAP_MAX] = {
+	{
+		.virt = 0x800000000000UL,
+		.phys = 0x800000000000UL,
+		.size = 0x40000000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		.virt = 0x840000000000UL,
+		.phys = 0x840000000000UL,
+		.size = 0x40000000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		.virt = 0x880000000000UL,
+		.phys = 0x880000000000UL,
+		.size = 0x40000000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}
+
+};
+
+struct mm_region *mem_map = otx_mem_map;
+
+void mem_map_fill(void)
+{
+	int banks = OTX_MEM_MAP_USED;
+	u32 dram_start = CONFIG_SYS_TEXT_BASE;
+
+	if (otx_is_soc(CN83XX)) {
+		otx_mem_map[banks].virt = 0x8c0000000000UL;
+		otx_mem_map[banks].phys = 0x8c0000000000UL;
+		otx_mem_map[banks].size = 0x40000000000UL;
+		otx_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+					   PTE_BLOCK_NON_SHARE;
+		banks = banks + 1;
+	}
+
+	for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		otx_mem_map[banks].virt = dram_start;
+		otx_mem_map[banks].phys = dram_start;
+		otx_mem_map[banks].size = gd->ram_size;
+		otx_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+					   PTE_BLOCK_NON_SHARE;
+		banks = banks + 1;
+	}
+}
+
+u64 get_page_table_size(void)
+{
+	return 0x80000;
+}
+
+void reset_cpu(void)
+{
+}
diff --git a/roms/u-boot/arch/arm/mach-octeontx/lowlevel_init.S b/roms/u-boot/arch/arm/mach-octeontx/lowlevel_init.S
new file mode 100644
index 000000000..41a9f08ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx/lowlevel_init.S
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+.align 8
+.global fdt_base_addr
+fdt_base_addr:
+	.dword 0x0
+
+.global save_boot_params
+save_boot_params:
+	/* Read FDT base from x1 register passed by ATF */
+	adr	x21, fdt_base_addr
+	str	x1, [x21]
+
+	/* Returns */
+	b	save_boot_params_ret
+
+ENTRY(lowlevel_init)
+	mov	x29, lr			/* Save LR */
+
+	/* any lowlevel init should go here */
+
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-octeontx2/Kconfig b/roms/u-boot/arch/arm/mach-octeontx2/Kconfig
new file mode 100644
index 000000000..8e5cb0f63
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx2/Kconfig
@@ -0,0 +1,23 @@
+if ARCH_OCTEONTX2
+
+choice
+	prompt "OcteonTX2 board select"
+	optional
+
+config TARGET_OCTEONTX2_95XX
+	bool "Marvell OcteonTX2 CN95XX"
+
+config TARGET_OCTEONTX2_96XX
+	bool "Marvell OcteonTX2 CN96XX"
+
+endchoice
+
+config SYS_SOC
+	string
+	default "octeontx2"
+
+config SYS_PCI_64BIT
+	bool
+	default y
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-octeontx2/Makefile b/roms/u-boot/arch/arm/mach-octeontx2/Makefile
new file mode 100644
index 000000000..c3192343d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx2/Makefile
@@ -0,0 +1,9 @@
+#/*
+# * Copyright (C) 2018 Marvell International Ltd.
+# *
+# * SPDX-License-Identifier:    GPL-2.0
+# * https://spdx.org/licenses
+# */
+
+obj-y += lowlevel_init.o clock.o cpu.o
+
diff --git a/roms/u-boot/arch/arm/mach-octeontx2/clock.c b/roms/u-boot/arch/arm/mach-octeontx2/clock.c
new file mode 100644
index 000000000..9da21077e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx2/clock.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier:    GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+#include <asm/arch/clock.h>
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void)
+{
+	union rst_boot rst_boot;
+
+	rst_boot.u = readq(RST_BOOT);
+
+	return rst_boot.s.pnr_mul * PLL_REF_CLK;
+}
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void)
+{
+	union rst_boot rst_boot;
+
+	rst_boot.u = readq(RST_BOOT);
+
+	return rst_boot.s.c_mul * PLL_REF_CLK;
+}
diff --git a/roms/u-boot/arch/arm/mach-octeontx2/config.mk b/roms/u-boot/arch/arm/mach-octeontx2/config.mk
new file mode 100644
index 000000000..9214f6b74
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx2/config.mk
@@ -0,0 +1,4 @@
+ifeq ($(CONFIG_ARCH_OCTEONTX2),y)
+PLATFORM_CPPFLAGS += $(call cc-option,-march=armv8.2-a,)
+PLATFORM_CPPFLAGS += $(call cc-option,-mtune=octeontx2,)
+endif
diff --git a/roms/u-boot/arch/arm/mach-octeontx2/cpu.c b/roms/u-boot/arch/arm/mach-octeontx2/cpu.c
new file mode 100644
index 000000000..afa458c09
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx2/cpu.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier:    GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define OTX2_MEM_MAP_USED 4
+
+/* +1 is end of list which needs to be empty */
+#define OTX2_MEM_MAP_MAX (OTX2_MEM_MAP_USED + CONFIG_NR_DRAM_BANKS + 1)
+
+static struct mm_region otx2_mem_map[OTX2_MEM_MAP_MAX] = {
+	{
+		.virt = 0x800000000000UL,
+		.phys = 0x800000000000UL,
+		.size = 0x40000000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		.virt = 0x840000000000UL,
+		.phys = 0x840000000000UL,
+		.size = 0x40000000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		.virt = 0x880000000000UL,
+		.phys = 0x880000000000UL,
+		.size = 0x40000000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		.virt = 0x8c0000000000UL,
+		.phys = 0x8c0000000000UL,
+		.size = 0x40000000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}
+};
+
+struct mm_region *mem_map = otx2_mem_map;
+
+void mem_map_fill(void)
+{
+	int banks = OTX2_MEM_MAP_USED;
+	u32 dram_start = CONFIG_SYS_TEXT_BASE;
+
+	for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		otx2_mem_map[banks].virt = dram_start;
+		otx2_mem_map[banks].phys = dram_start;
+		otx2_mem_map[banks].size = gd->ram_size;
+		otx2_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+					    PTE_BLOCK_NON_SHARE;
+		banks = banks + 1;
+	}
+}
+
+u64 get_page_table_size(void)
+{
+	return 0x80000;
+}
+
+void reset_cpu(void)
+{
+}
diff --git a/roms/u-boot/arch/arm/mach-octeontx2/lowlevel_init.S b/roms/u-boot/arch/arm/mach-octeontx2/lowlevel_init.S
new file mode 100644
index 000000000..41a9f08ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-octeontx2/lowlevel_init.S
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier:    GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+.align 8
+.global fdt_base_addr
+fdt_base_addr:
+	.dword 0x0
+
+.global save_boot_params
+save_boot_params:
+	/* Read FDT base from x1 register passed by ATF */
+	adr	x21, fdt_base_addr
+	str	x1, [x21]
+
+	/* Returns */
+	b	save_boot_params_ret
+
+ENTRY(lowlevel_init)
+	mov	x29, lr			/* Save LR */
+
+	/* any lowlevel init should go here */
+
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-omap2/Kconfig b/roms/u-boot/arch/arm/mach-omap2/Kconfig
new file mode 100644
index 000000000..48bc80a63
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/Kconfig
@@ -0,0 +1,194 @@
+if ARCH_OMAP2PLUS
+
+choice
+	prompt "OMAP2+ platform select"
+	default OMAP34XX
+
+config OMAP34XX
+	bool "OMAP34XX SoC"
+	select ARM_CORTEX_A8_CVE_2017_5715
+	select ARM_ERRATA_430973
+	select ARM_ERRATA_454179
+	select ARM_ERRATA_621766
+	select ARM_ERRATA_725233
+	select SPL_USE_TINY_PRINTF if SPL
+	imply NAND_OMAP_GPMC
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
+	imply SPL_GPIO_SUPPORT
+	imply SPL_I2C_SUPPORT
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_MMC_SUPPORT
+	imply SPL_NAND_SUPPORT
+	imply SPL_OMAP3_ID_NAND
+	imply SPL_POWER_SUPPORT
+	imply SPL_SERIAL_SUPPORT
+	imply SYS_I2C_OMAP24XX
+	imply SYS_THUMB_BUILD
+	imply TWL4030_POWER
+
+config OMAP44XX
+	bool "OMAP44XX SoC"
+	select SPL_USE_TINY_PRINTF
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
+	imply SPL_DISPLAY_PRINT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
+	imply SPL_GPIO_SUPPORT
+	imply SPL_I2C_SUPPORT
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_MMC_SUPPORT
+	imply SPL_NAND_SIMPLE
+	imply SPL_NAND_SUPPORT
+	imply SPL_POWER_SUPPORT
+	imply SPL_SERIAL_SUPPORT
+	imply SYS_I2C_OMAP24XX
+	imply SYS_THUMB_BUILD
+
+config OMAP54XX
+	bool "OMAP54XX SoC"
+	select ARM_CORTEX_A15_CVE_2017_5715
+	select ARM_ERRATA_798870
+	select SYS_THUMB_BUILD
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
+	imply SPL_DISPLAY_PRINT
+	imply SPL_ENV_SUPPORT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
+	imply SPL_GPIO_SUPPORT
+	imply SPL_I2C_SUPPORT
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_MMC_SUPPORT
+	imply SPL_NAND_AM33XX_BCH
+	imply SPL_NAND_AM33XX_BCH
+	imply SPL_NAND_SUPPORT
+	imply SPL_POWER_SUPPORT
+	imply SPL_SERIAL_SUPPORT
+	imply SYS_I2C_OMAP24XX
+
+config TI814X
+	bool "TI814X SoC"
+	select SPECIFY_CONSOLE_INDEX
+	help
+	  Support for AM335x SOC from Texas Instruments.
+	  The AM335x high performance SOC features a Cortex-A8
+	  ARM core and more.
+
+config TI816X
+	bool "TI816X SoC"
+	select SPECIFY_CONSOLE_INDEX
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
+	help
+	  Support for AM335x SOC from Texas Instruments.
+	  The AM335x high performance SOC features a Cortex-A8
+	  ARM core and more.
+
+config AM43XX
+	bool "AM43XX SoC"
+	select SPECIFY_CONSOLE_INDEX
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
+	imply SPL_DM
+	imply SPL_DM_SEQ_ALIAS
+	imply SPL_NAND_AM33XX_BCH
+	imply SPL_NAND_SUPPORT
+	imply SPL_OF_CONTROL
+	imply SPL_OF_TRANSLATE
+	imply SPL_SEPARATE_BSS
+	imply SPL_SYS_MALLOC_SIMPLE
+	imply SYS_I2C_OMAP24XX
+	imply SYS_THUMB_BUILD
+	help
+	  Support for AM43xx SOC from Texas Instruments.
+	  The AM43xx high performance SOC features a Cortex-A9
+	  ARM core, a quad core PRU-ICSS for industrial Ethernet
+	  protocols, dual camera support, optional 3D graphics
+	  and an optional customer programmable secure boot.
+
+config AM33XX
+	bool "AM33XX SoC"
+	select ARM_CORTEX_A8_CVE_2017_5715
+	select SPECIFY_CONSOLE_INDEX
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
+	imply SPL_NAND_AM33XX_BCH
+	imply SPL_NAND_SUPPORT
+	imply SYS_I2C_OMAP24XX
+	imply SYS_THUMB_BUILD
+	imply SPL_USE_TINY_PRINTF
+	help
+	  Support for AM335x SOC from Texas Instruments.
+	  The AM335x high performance SOC features a Cortex-A8
+	  ARM core, a dual core PRU-ICSS for industrial Ethernet
+	  protocols, optional 3D graphics and an optional customer
+	  programmable secure boot.
+
+endchoice
+
+config SYS_MPUCLK
+	int "MPU CLK speed"
+	depends on AM33XX
+	default 500
+	help
+	  Defines the MPU clock speed (in MHz).
+
+config TI_SECURE_EMIF_REGION_START
+	hex "Reserved EMIF region start address"
+	depends on TI_SECURE_DEVICE
+	default 0x0
+	help
+	  Reserved EMIF region start address. Set to "0" to auto-select
+	  to be at the end of the external memory region.
+
+config TI_SECURE_EMIF_TOTAL_REGION_SIZE
+	hex "Reserved EMIF region size"
+	depends on TI_SECURE_DEVICE
+	default 0x0
+	help
+	  Total reserved EMIF region size. Default is 0, which means no reserved EMIF
+	  region on secure devices.
+
+config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
+	hex "Size of protected region within reserved EMIF region"
+	depends on TI_SECURE_DEVICE
+	default 0x0
+	help
+	  This config option is used to specify the size of the portion of the total
+	  reserved EMIF region set aside for secure OS needs that will  be protected
+	  using hardware memory firewalls. This value must be smaller than the
+	  TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
+
+source "arch/arm/mach-omap2/omap3/Kconfig"
+
+source "arch/arm/mach-omap2/omap4/Kconfig"
+
+source "arch/arm/mach-omap2/omap5/Kconfig"
+
+source "arch/arm/mach-omap2/am33xx/Kconfig"
+
+source "board/BuR/brxre1/Kconfig"
+source "board/BuR/brsmarc1/Kconfig"
+source "board/BuR/brppt1/Kconfig"
+source "board/siemens/draco/Kconfig"
+source "board/siemens/pxm2/Kconfig"
+source "board/siemens/rut/Kconfig"
+source "board/ti/ti816x/Kconfig"
+source "board/ti/am43xx/Kconfig"
+source "board/ti/am335x/Kconfig"
+source "board/compulab/cm_t335/Kconfig"
+source "board/compulab/cm_t43/Kconfig"
+source "board/phytec/phycore_am335x_r2/Kconfig"
+
+config SPL_LDSCRIPT
+        default "arch/arm/mach-omap2/u-boot-spl.lds"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/Makefile b/roms/u-boot/arch/arm/mach-omap2/Makefile
new file mode 100644
index 000000000..bb01eab80
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/Makefile
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
+obj-$(CONFIG_OMAP34XX) += omap3/
+obj-$(CONFIG_OMAP44XX) += omap4/
+obj-$(CONFIG_OMAP54XX) += omap5/
+
+obj-y	+= reset.o
+ifeq ($(CONFIG_TIMER),)
+obj-y	+= timer.o
+else
+ifdef CONFIG_SPL_BUILD
+obj-y	+= timer.o
+endif
+endif
+obj-y	+= utils.o
+
+obj-y	+= sysinfo-common.o
+ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+obj-y	+= hwinit-common.o
+obj-y	+= clocks-common.o
+obj-y	+= emif-common.o
+obj-y	+= vc.o
+obj-y	+= abb.o
+endif
+
+ifneq ($(CONFIG_OMAP54XX),)
+ifeq ($(CONFIG_DM_SCSI),)
+obj-y	+= pipe3-phy.o
+obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
+endif
+endif
+
+ifeq ($(CONFIG_$(SPL_TPL_)SYS_DCACHE_OFF),)
+obj-y	+= omap-cache.o
+endif
+
+obj-y	+= boot-common.o
+obj-y	+= lowlevel_init.o
+
+obj-y	+= mem-common.o
+
+obj-y	+= fdt-common.o
+
+obj-$(CONFIG_TI_SECURE_DEVICE) += sec-common.o
diff --git a/roms/u-boot/arch/arm/mach-omap2/abb.c b/roms/u-boot/arch/arm/mach-omap2/abb.c
new file mode 100644
index 000000000..722e6db05
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/abb.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Adaptive Body Bias programming sequence for OMAP family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/bitops.h>
+
+__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+	return -1;
+}
+
+static void abb_setup_timings(u32 setup)
+{
+	u32 sys_rate, sr2_cnt, clk_cycles;
+
+	/*
+	 * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a
+	 * transition and must be programmed with the correct time at boot.
+	 * The value programmed into the register is the number of SYS_CLK
+	 * clock cycles that match a given wall time profiled for the ldo.
+	 * This value depends on:
+	 * settling time of ldo in micro-seconds (varies per OMAP family),
+	 * of clock cycles per SYS_CLK period (varies per OMAP family),
+	 * the SYS_CLK frequency in MHz (varies per board)
+	 * The formula is:
+	 *
+	 *		       ldo settling time (in micro-seconds)
+	 * SR2_WTCNT_VALUE = ------------------------------------------
+	 *		    (# system clock cycles) * (sys_clk period)
+	 *
+	 * Put another way:
+	 *
+	 * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate))
+	 *
+	 * To avoid dividing by zero multiply both "# clock cycles" and
+	 * "settling time" by 10 such that the final result is the one we want.
+	 */
+
+	/* calculate SR2_WTCNT_VALUE */
+	sys_rate = DIV_ROUND_CLOSEST(V_OSCK, 1000000);
+	clk_cycles = DIV_ROUND_CLOSEST(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
+	sr2_cnt = DIV_ROUND_CLOSEST(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
+
+	setbits_le32(setup,
+		     sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1));
+}
+
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+	       u32 txdone, u32 txdone_mask, u32 opp)
+{
+	u32 abb_type_mask, opp_sel_mask;
+
+	/* sanity check */
+	if (!setup || !control || !txdone)
+		return;
+
+	/* setup ABB only in case of Fast or Slow OPP */
+	switch (opp) {
+	case OMAP_ABB_FAST_OPP:
+		abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK;
+		opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK;
+		break;
+	case OMAP_ABB_SLOW_OPP:
+		abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK;
+		opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK;
+		break;
+	default:
+	       return;
+	}
+
+	/*
+	 * For some OMAP silicons additional setup for LDOVBB register is
+	 * required. This is determined by data retrieved from corresponding
+	 * OPP EFUSE register. Data, which is retrieved from EFUSE - is
+	 * ABB enable/disable flag and VSET value, which must be copied
+	 * to LDOVBB register. If function call fails - return quietly,
+	 * it means no ABB is required for such silicon.
+	 *
+	 * For silicons, which don't require LDOVBB setup "fuse" and
+	 * "ldovbb" offsets are not defined. ABB will be initialized in
+	 * the common way for them.
+	 */
+	if (fuse && ldovbb) {
+		if (abb_setup_ldovbb(fuse, ldovbb))
+			return;
+	}
+
+	/* clear ABB registers */
+	writel(0, setup);
+	writel(0, control);
+
+	/* configure timings, based on oscillator value */
+	abb_setup_timings(setup);
+
+	/* clear pending interrupts before setup */
+	setbits_le32(txdone, txdone_mask);
+
+	/* select ABB type */
+	setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK);
+
+	/* initiate ABB ldo change */
+	setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK);
+
+	/* wait until transition complete */
+	if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY))
+		puts("Error: ABB txdone is not set\n");
+
+	/* clear ABB tranxdone */
+	setbits_le32(txdone, txdone_mask);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/Kconfig b/roms/u-boot/arch/arm/mach-omap2/am33xx/Kconfig
new file mode 100644
index 000000000..11e54cd29
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/Kconfig
@@ -0,0 +1,281 @@
+if TI816X
+
+config TARGET_TI816X_EVM
+	bool "Support ti816x_evm"
+	help
+	  This option specifies support for the TI8168 EVM development platform
+	  with PG2.0 silicon and DDR3 DRAM.
+
+endif
+
+if TI814X
+
+config TARGET_TI814X_EVM
+	bool "Support ti814x_evm"
+	help
+	  This option specifies support for the TI8148
+	  EVM development platform.
+
+endif
+
+if AM33XX
+
+config AM33XX_CHILISOM
+	bool
+	select SUPPORT_SPL
+
+choice
+	prompt "AM33xx board select"
+
+config TARGET_AM335X_EVM
+	bool "Support am335x_evm"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select TI_I2C_BOARD_DETECT
+	select SUPPORT_EXTENSION_SCAN
+	imply CMD_DM
+	imply SPL_DM
+	imply SPL_DM_SEQ_ALIAS
+	imply SPL_ENV_SUPPORT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
+	imply SPL_GPIO_SUPPORT
+	imply SPL_I2C_SUPPORT
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_MMC_SUPPORT
+	imply SPL_NAND_SUPPORT
+	imply SPL_OF_LIBFDT
+	imply SPL_POWER_SUPPORT
+	imply SPL_SEPARATE_BSS
+	imply SPL_SERIAL_SUPPORT
+	imply SPL_SYS_MALLOC_SIMPLE
+	imply SPL_WATCHDOG_SUPPORT
+	imply SPL_YMODEM_SUPPORT
+	help
+	  This option specifies support for the AM335x
+	  GP and HS EVM development platforms. The AM335x
+	  GP EVM is a standalone test, development, and
+	  evaluation module system that enables developers
+	  to write software and develop hardware around
+	  an AM335x processor subsystem.
+
+config TARGET_AM335X_BALTOS
+	bool "Support am335x_baltos"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_AM335X_IGEP003X
+	bool "Support am335x_igep003x"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_AM335X_SHC
+	bool "Support am335x based shc board from bosch"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+	imply CMD_SPL
+
+config TARGET_AM335X_GUARDIAN
+	bool "Support am335x based guardian board from bosch"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+	select DM_USB
+
+config TARGET_AM335X_SL50
+	bool "Support am335x_sl50"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_BRXRE1
+	bool "Support BRXRE1"
+	select BOARD_LATE_INIT
+
+config TARGET_BRSMARC1
+	bool "Support BRSMARC1"
+	select BOARD_LATE_INIT
+
+config TARGET_BRPPT1
+	bool "Support BRPPT1"
+	select BOARD_LATE_INIT
+
+config TARGET_CHILIBOARD
+	bool "Grinn chiliBoard"
+	select AM33XX_CHILISOM
+	select BOARD_LATE_INIT
+	select DM
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_CM_T335
+	bool "Support cm_t335"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_DRACO
+	bool "Support draco"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_ETAMIN
+	bool "Support etamin"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_PCM051
+	bool "Support pcm051"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_PHYCORE_AM335X_R2
+	bool "Support phyCORE AM335X R2"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_PXM2
+	bool "Support pxm2"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_RASTABAN
+	bool "Support rastaban"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_RUT
+	bool "Support rut"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_THUBAN
+	bool "Support thuban"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_PDU001
+	bool "Support PDU001"
+	select DM
+	select DM_SERIAL
+	imply SPL_SEPARATE_BSS
+	imply CMD_DM
+	help
+	  Support for PDU001 platform developed by EETS GmbH.
+	  The PDU001 is a processor and display unit developed around
+	  the Computing-Module m2 from bytes at work AG.
+
+endchoice
+
+endif
+
+if AM43XX
+
+choice
+	prompt "AM43xx board select"
+
+config TARGET_AM43XX_EVM
+	bool "Support am43xx_evm"
+	select BOARD_LATE_INIT
+	select TI_I2C_BOARD_DETECT
+	imply DM_ETH
+	imply DM_I2C
+	imply DM_SPI
+	imply DM_SPI_FLASH
+	imply SPL_ENV_SUPPORT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
+	imply SPL_GPIO_SUPPORT
+	imply SPL_I2C_SUPPORT
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_MMC_SUPPORT
+	imply SPL_NAND_SUPPORT
+	imply SPL_POWER_SUPPORT
+	imply SPL_SERIAL_SUPPORT
+	imply SPL_WATCHDOG_SUPPORT
+	imply SPL_YMODEM_SUPPORT
+	help
+	  This option specifies support for the AM43xx
+	  GP and HS EVM development platforms.The AM437x
+	  GP EVM is a standalone test, development, and
+	  evaluation module system that enables developers
+	  to write software and develop hardware around
+	  an AM43xx processor subsystem.
+
+config TARGET_CM_T43
+	bool "Support cm_t43"
+
+endchoice
+
+config SPL_RTC_DDR_SUPPORT
+	bool
+	depends on SPL
+	prompt "Enable RTC-DDR ONLY Support"
+	help
+	  If you want RTC-DDR ONLY Support, say Y. RTC Only with DDR in
+	  self-refresh mode is a special power saving mode where in all
+	  the other voltages are turned off apart from the RTC domain and DDR.
+	  So only RTC is alive and ticking and one can program it to wake
+	  up after a predetermined period. Once RTC alarm fires, the PMIC
+	  powers up all the voltage domains. U-Boot takes a special path
+	  as the DDR has contents is in self-refresh and restore path is
+	  followed.
+
+endif
+
+if AM43XX || AM33XX
+config PUB_ROM_DATA_SIZE
+	hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
+	default 0x8400
+	help
+	  During the device boot, the public ROM uses the top of
+	  the public L3 OCMC RAM to store r/w data like stack,
+	  heap, globals etc. When the ROM is copying the boot
+	  image from the boot media into memory, the image must
+	  not spill over into this area. This value can be used
+	  during compile time to determine the maximum size of a
+	  boot image. Once the ROM transfers control to the boot
+	  image, this area is no longer used, and can be reclaimed
+	  for run time use by the boot image.
+endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/Makefile b/roms/u-boot/arch/arm/mach-omap2/am33xx/Makefile
new file mode 100644
index 000000000..61c76d045
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/Makefile
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+
+obj-$(CONFIG_AM33XX)	+= clock_am33xx.o
+obj-$(CONFIG_TI814X)	+= clock_ti814x.o
+obj-$(CONFIG_AM43XX)	+= clock_am43xx.o
+
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),)
+obj-y	+= clock.o
+endif
+
+obj-$(CONFIG_TI816X)	+= clock_ti816x.o
+obj-y	+= sys_info.o
+obj-y	+= ddr.o
+ifeq ($(CONFIG_TI816X)$(CONFIG_SKIP_LOWLEVEL_INIT),)
+obj-y	+= emif4.o
+endif
+obj-$(CONFIG_TI816X)	+= ti816x_emif4.o
+obj-y	+= board.o
+obj-y	+= mux.o
+obj-y	+= prcm-regs.o
+obj-y	+= hw_data.o
+obj-y	+= fdt.o
+
+obj-$(CONFIG_CLOCK_SYNTHESIZER)	+= clk_synthesizer.o
+
+obj-$(CONFIG_AM33XX_CHILISOM) += chilisom.o
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/board.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/board.c
new file mode 100644
index 000000000..62178f1e7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/board.c
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * board.c
+ *
+ * Common board functions for AM33XX based boards
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <debug_uart.h>
+#include <errno.h>
+#include <init.h>
+#include <net.h>
+#include <ns16550.h>
+#include <omap3_spi.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/i2c.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <asm/omap_common.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/omap_musb.h>
+#include <asm/davinci_rtc.h>
+
+#define AM43XX_EMIF_BASE				0x4C000000
+#define AM43XX_SDRAM_CONFIG_OFFSET			0x8
+#define AM43XX_SDRAM_TYPE_MASK				0xE0000000
+#define AM43XX_SDRAM_TYPE_SHIFT				29
+#define AM43XX_SDRAM_TYPE_DDR3				3
+#define AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET		0xDC
+#define AM43XX_RDWRLVLFULL_START			0x80000000
+
+/* SPI flash. */
+#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
+#define AM33XX_SPI0_BASE	0x48030000
+#define AM33XX_SPI0_OFFSET	(AM33XX_SPI0_BASE + OMAP4_MCSPI_REG_OFFSET)
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	sdram_init();
+#endif
+
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size(
+			(void *)CONFIG_SYS_SDRAM_BASE,
+			CONFIG_MAX_RAM_BANK_SIZE);
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct ns16550_plat am33xx_serial[] = {
+	{ .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+# ifdef CONFIG_SYS_NS16550_COM2
+	{ .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+#  ifdef CONFIG_SYS_NS16550_COM3
+	{ .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
+	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+#  endif
+# endif
+};
+
+U_BOOT_DRVINFOS(am33xx_uarts) = {
+	{ "ns16550_serial", &am33xx_serial[0] },
+#  ifdef CONFIG_SYS_NS16550_COM2
+	{ "ns16550_serial", &am33xx_serial[1] },
+#   ifdef CONFIG_SYS_NS16550_COM3
+	{ "ns16550_serial", &am33xx_serial[2] },
+	{ "ns16550_serial", &am33xx_serial[3] },
+	{ "ns16550_serial", &am33xx_serial[4] },
+	{ "ns16550_serial", &am33xx_serial[5] },
+#   endif
+#  endif
+};
+
+#if CONFIG_IS_ENABLED(DM_I2C)
+static const struct omap_i2c_plat am33xx_i2c[] = {
+	{ I2C_BASE1, 100000, OMAP_I2C_REV_V2},
+	{ I2C_BASE2, 100000, OMAP_I2C_REV_V2},
+	{ I2C_BASE3, 100000, OMAP_I2C_REV_V2},
+};
+
+U_BOOT_DRVINFOS(am33xx_i2c) = {
+	{ "i2c_omap", &am33xx_i2c[0] },
+	{ "i2c_omap", &am33xx_i2c[1] },
+	{ "i2c_omap", &am33xx_i2c[2] },
+};
+#endif
+
+#if CONFIG_IS_ENABLED(DM_GPIO)
+static const struct omap_gpio_plat am33xx_gpio[] = {
+	{ 0, AM33XX_GPIO0_BASE },
+	{ 1, AM33XX_GPIO1_BASE },
+	{ 2, AM33XX_GPIO2_BASE },
+	{ 3, AM33XX_GPIO3_BASE },
+#ifdef CONFIG_AM43XX
+	{ 4, AM33XX_GPIO4_BASE },
+	{ 5, AM33XX_GPIO5_BASE },
+#endif
+};
+
+U_BOOT_DRVINFOS(am33xx_gpios) = {
+	{ "gpio_omap", &am33xx_gpio[0] },
+	{ "gpio_omap", &am33xx_gpio[1] },
+	{ "gpio_omap", &am33xx_gpio[2] },
+	{ "gpio_omap", &am33xx_gpio[3] },
+#ifdef CONFIG_AM43XX
+	{ "gpio_omap", &am33xx_gpio[4] },
+	{ "gpio_omap", &am33xx_gpio[5] },
+#endif
+};
+#endif
+#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct omap3_spi_plat omap3_spi_pdata = {
+	.regs = (struct mcspi *)AM33XX_SPI0_OFFSET,
+	.pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT,
+};
+
+U_BOOT_DRVINFO(am33xx_spi) = {
+	.name = "omap3_spi",
+	.plat = &omap3_spi_pdata,
+};
+#endif
+#endif
+
+#if !CONFIG_IS_ENABLED(DM_GPIO)
+static const struct gpio_bank gpio_bank_am33xx[] = {
+	{ (void *)AM33XX_GPIO0_BASE },
+	{ (void *)AM33XX_GPIO1_BASE },
+	{ (void *)AM33XX_GPIO2_BASE },
+	{ (void *)AM33XX_GPIO3_BASE },
+#ifdef CONFIG_AM43XX
+	{ (void *)AM33XX_GPIO4_BASE },
+	{ (void *)AM33XX_GPIO5_BASE },
+#endif
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
+#endif
+
+#if defined(CONFIG_MMC_OMAP_HS)
+int cpu_mmc_init(struct bd_info *bis)
+{
+	int ret;
+
+	ret = omap_mmc_init(0, 0, 0, -1, -1);
+	if (ret)
+		return ret;
+
+	return omap_mmc_init(1, 0, 0, -1, -1);
+}
+#endif
+
+/*
+ * RTC only with DDR in self-refresh mode magic value, checked against during
+ * boot to see if we have a valid config. This should be in sync with the value
+ * that will be in drivers/soc/ti/pm33xx.c.
+ */
+#define RTC_MAGIC_VAL		0x8cd0
+
+/* Board type field bit shift for RTC only with DDR in self-refresh mode */
+#define RTC_BOARD_TYPE_SHIFT	16
+
+/* AM33XX has two MUSB controllers which can be host or gadget */
+#if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
+	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
+	(!CONFIG_IS_ENABLED(DM_USB) || !CONFIG_IS_ENABLED(OF_CONTROL)) && \
+	(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_MUSB_NEW_SUPPORT))
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 16,
+	.ram_bits       = 12,
+};
+
+#if CONFIG_IS_ENABLED(DM_USB) && !CONFIG_IS_ENABLED(OF_CONTROL)
+static struct ti_musb_plat usb0 = {
+	.base = (void *)USB0_OTG_BASE,
+	.ctrl_mod_base = &((struct ctrl_dev *)CTRL_DEVICE_BASE)->usb_ctrl0,
+	.plat = {
+		.config         = &musb_config,
+		.power          = 50,
+		.platform_ops	= &musb_dsps_ops,
+		},
+};
+
+static struct ti_musb_plat usb1 = {
+	.base = (void *)USB1_OTG_BASE,
+	.ctrl_mod_base = &((struct ctrl_dev *)CTRL_DEVICE_BASE)->usb_ctrl1,
+	.plat = {
+		.config         = &musb_config,
+		.power          = 50,
+		.platform_ops	= &musb_dsps_ops,
+		},
+};
+
+U_BOOT_DRVINFOS(am33xx_usbs) = {
+#if CONFIG_AM335X_USB0_MODE == MUSB_PERIPHERAL
+	{ "ti-musb-peripheral", &usb0 },
+#elif CONFIG_AM335X_USB0_MODE == MUSB_HOST
+	{ "ti-musb-host", &usb0 },
+#endif
+#if CONFIG_AM335X_USB1_MODE == MUSB_PERIPHERAL
+	{ "ti-musb-peripheral", &usb1 },
+#elif CONFIG_AM335X_USB1_MODE == MUSB_HOST
+	{ "ti-musb-host", &usb1 },
+#endif
+};
+
+int arch_misc_init(void)
+{
+	return 0;
+}
+#else
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN			(1 << 0)
+#define CM_PHY_OTG_PWRDN		(1 << 1)
+#define OTGVDET_EN			(1 << 19)
+#define OTGSESSENDEN			(1 << 20)
+
+static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
+{
+	if (on) {
+		clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+				OTGVDET_EN | OTGSESSENDEN);
+	} else {
+		clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+	}
+}
+
+#ifdef CONFIG_AM335X_USB0
+static void am33xx_otg0_set_phy_power(struct udevice *dev, u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
+}
+
+struct omap_musb_board_data otg0_board_data = {
+	.set_phy_power = am33xx_otg0_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg0_plat = {
+	.mode           = CONFIG_AM335X_USB0_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg0_board_data,
+};
+#endif
+
+#ifdef CONFIG_AM335X_USB1
+static void am33xx_otg1_set_phy_power(struct udevice *dev, u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
+}
+
+struct omap_musb_board_data otg1_board_data = {
+	.set_phy_power = am33xx_otg1_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg1_plat = {
+	.mode           = CONFIG_AM335X_USB1_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg1_board_data,
+};
+#endif
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_AM335X_USB0
+	musb_register(&otg0_plat, &otg0_board_data,
+		(void *)USB0_OTG_BASE);
+#endif
+#ifdef CONFIG_AM335X_USB1
+	musb_register(&otg1_plat, &otg1_board_data,
+		(void *)USB1_OTG_BASE);
+#endif
+	return 0;
+}
+#endif
+
+#else	/* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
+
+int arch_misc_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_first_device(UCLASS_MISC, &dev);
+	if (ret || !dev)
+		return ret;
+
+#if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER)
+	ret = usb_ether_init();
+	if (ret) {
+		pr_err("USB ether init failed\n");
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+
+#endif /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) || \
+	(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT))
+static void rtc32k_unlock(struct davinci_rtc *rtc)
+{
+	/*
+	 * Unlock the RTC's registers.  For more details please see the
+	 * RTC_SS section of the TRM.  In order to unlock we need to
+	 * write these specific values (keys) in this order.
+	 */
+	writel(RTC_KICK0R_WE, &rtc->kick0r);
+	writel(RTC_KICK1R_WE, &rtc->kick1r);
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
+/*
+ * Write contents of the RTC_SCRATCH1 register based on board type
+ * Two things are passed
+ * on. First 16 bits (0:15) are written with RTC_MAGIC value. Once the
+ * control gets to kernel, kernel reads the scratchpad register and gets to
+ * know that bootloader has rtc_only support.
+ *
+ * Second important thing is the board type  (16:31). This is needed in the
+ * rtc_only boot where in we want to avoid costly i2c reads to eeprom to
+ * identify the board type and we go ahead and copy the board strings to
+ * am43xx_board_name.
+ */
+void update_rtc_magic(void)
+{
+	struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
+	u32 magic = RTC_MAGIC_VAL;
+
+	magic |= (rtc_only_get_board_type() << RTC_BOARD_TYPE_SHIFT);
+
+	rtc32k_unlock(rtc);
+
+	/* write magic */
+	writel(magic, &rtc->scratch1);
+}
+#endif
+
+/*
+ * In the case of non-SPL based booting we'll want to call these
+ * functions a tiny bit later as it will require gd to be set and cleared
+ * and that's not true in s_init in this case so we cannot do it there.
+ */
+int board_early_init_f(void)
+{
+	set_mux_conf_regs();
+	prcm_init();
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
+	update_rtc_magic();
+#endif
+	return 0;
+}
+
+/*
+ * This function is the place to do per-board things such as ramp up the
+ * MPU clock frequency.
+ */
+__weak void am33xx_spl_board_init(void)
+{
+}
+
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
+static void rtc32k_enable(void)
+{
+	struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
+
+	rtc32k_unlock(rtc);
+
+	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
+	writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+#endif
+
+static void uart_soft_reset(void)
+{
+	struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+	u32 regval;
+
+	regval = readl(&uart_base->uartsyscfg);
+	regval |= UART_RESET;
+	writel(regval, &uart_base->uartsyscfg);
+	while ((readl(&uart_base->uartsyssts) &
+		UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+		;
+
+	/* Disable smart idle */
+	regval = readl(&uart_base->uartsyscfg);
+	regval |= UART_SMART_IDLE_EN;
+	writel(regval, &uart_base->uartsyscfg);
+}
+
+static void watchdog_disable(void)
+{
+	struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+
+	writel(0xAAAA, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+	writel(0x5555, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+}
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
+/*
+ * Check if we are executing rtc-only + DDR mode, and resume from it if needed
+ */
+static void rtc_only(void)
+{
+	struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
+	struct prm_device_inst *prm_device =
+				(struct prm_device_inst *)PRM_DEVICE_INST;
+
+	u32 scratch1, sdrc;
+	void (*resume_func)(void);
+
+	scratch1 = readl(&rtc->scratch1);
+
+	/*
+	 * Check RTC scratch against RTC_MAGIC_VAL, RTC_MAGIC_VAL is only
+	 * written to this register when we want to wake up from RTC only
+	 * with DDR in self-refresh mode. Contents of the RTC_SCRATCH1:
+	 * bits 0-15:  RTC_MAGIC_VAL
+	 * bits 16-31: board type (needed for sdram_init)
+	 */
+	if ((scratch1 & 0xffff) != RTC_MAGIC_VAL)
+		return;
+
+	rtc32k_unlock(rtc);
+
+	/* Clear RTC magic */
+	writel(0, &rtc->scratch1);
+
+	/*
+	 * Update board type based on value stored on RTC_SCRATCH1, this
+	 * is done so that we don't need to read the board type from eeprom
+	 * over i2c bus which is expensive
+	 */
+	rtc_only_update_board_type(scratch1 >> RTC_BOARD_TYPE_SHIFT);
+
+	/*
+	 * Enable EMIF_DEVOFF in PRCM_PRM_EMIF_CTRL to indicate to EMIF we
+	 * are resuming from self-refresh. This avoids an unnecessary re-init
+	 * of the DDR. The re-init takes time and we would need to wait for
+	 * it to complete before accessing DDR to avoid L3 NOC errors.
+	 */
+	writel(EMIF_CTRL_DEVOFF, &prm_device->emif_ctrl);
+
+	rtc_only_prcm_init();
+	sdram_init();
+
+	/* Check EMIF4D_SDRAM_CONFIG[31:29] SDRAM_TYPE */
+	/* Only perform leveling if SDRAM_TYPE = 3 (DDR3) */
+	sdrc = readl(AM43XX_EMIF_BASE + AM43XX_SDRAM_CONFIG_OFFSET);
+
+	sdrc &= AM43XX_SDRAM_TYPE_MASK;
+	sdrc >>= AM43XX_SDRAM_TYPE_SHIFT;
+
+	if (sdrc == AM43XX_SDRAM_TYPE_DDR3) {
+		writel(AM43XX_RDWRLVLFULL_START,
+		       AM43XX_EMIF_BASE +
+		       AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET);
+		mdelay(1);
+
+am43xx_wait:
+		sdrc = readl(AM43XX_EMIF_BASE +
+			     AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET);
+		if (sdrc == AM43XX_RDWRLVLFULL_START)
+			goto am43xx_wait;
+	}
+
+	resume_func = (void *)readl(&rtc->scratch0);
+	if (resume_func)
+		resume_func();
+}
+#endif
+
+void s_init(void)
+{
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
+	rtc_only();
+#endif
+}
+
+void early_system_init(void)
+{
+	/*
+	 * The ROM will only have set up sufficient pinmux to allow for the
+	 * first 4KiB NOR to be read, we must finish doing what we know of
+	 * the NOR mux in this space in order to continue.
+	 */
+#ifdef CONFIG_NOR_BOOT
+	enable_norboot_pin_mux();
+#endif
+	watchdog_disable();
+	set_uart_mux_conf();
+	setup_early_clocks();
+	uart_soft_reset();
+#ifdef CONFIG_SPL_BUILD
+	/*
+	 * Save the boot parameters passed from romcode.
+	 * We cannot delay the saving further than this,
+	 * to prevent overwrites.
+	 */
+	save_omap_boot_params();
+#endif
+#ifdef CONFIG_DEBUG_UART_OMAP
+	debug_uart_init();
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+	spl_early_init();
+#endif
+
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+	do_board_detect();
+#endif
+
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
+	/* Enable RTC32K clock */
+	rtc32k_enable();
+#endif
+}
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	hw_data_init();
+	early_system_init();
+	board_early_init_f();
+	sdram_init();
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size(
+			(void *)CONFIG_SYS_SDRAM_BASE,
+			CONFIG_MAX_RAM_BANK_SIZE);
+}
+#endif
+
+#endif
+
+int arch_cpu_init_dm(void)
+{
+	hw_data_init();
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	early_system_init();
+#endif
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/chilisom.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/chilisom.c
new file mode 100644
index 000000000..15b6b35ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/chilisom.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ * Copyright (C) 2017, Grinn - http://grinn-global.com/
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clk_synthesizer.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/emif.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <i2c.h>
+#include <power/tps65217.h>
+#include <spl.h>
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
+			PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
+			PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+	{-1},
+};
+
+static struct module_pin_mux nand_pin_mux[] = {
+	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
+	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
+	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
+	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
+	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
+	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
+	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
+	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
+	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
+	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* NAND_CS0 */
+	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
+	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
+	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
+	{-1},
+};
+
+static void enable_i2c0_pin_mux(void)
+{
+	configure_module_pin_mux(i2c0_pin_mux);
+}
+
+void chilisom_enable_pin_mux(void)
+{
+	/* chilisom pin mux */
+	configure_module_pin_mux(nand_pin_mux);
+}
+
+static const struct ddr_data ddr3_chilisom_data = {
+	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
+	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_chilisom_cmd_ctrl_data = {
+	.cmd0csratio = MT41K256M16HA125E_RATIO,
+	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd1csratio = MT41K256M16HA125E_RATIO,
+	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd2csratio = MT41K256M16HA125E_RATIO,
+	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_chilisom_emif_reg_data = {
+	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+	.ocp_config = 0x00141414,
+	.zq_config = MT41K256M16HA125E_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
+};
+
+void chilisom_spl_board_init(void)
+{
+	int mpu_vdd;
+	int usb_cur_lim;
+
+	enable_i2c0_pin_mux();
+
+	/* Get the frequency */
+	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
+
+
+	if (i2c_probe(TPS65217_CHIP_PM))
+		return;
+
+	/*
+	 * Increase USB current limit to 1300mA or 1800mA and set
+	 * the MPU voltage controller as needed.
+	 */
+	if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
+		usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
+		mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
+	} else {
+		usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
+		mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
+	}
+
+	if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
+			       TPS65217_POWER_PATH,
+			       usb_cur_lim,
+			       TPS65217_USB_INPUT_CUR_LIMIT_MASK))
+		puts("tps65217_reg_write failure\n");
+
+	/* Set DCDC3 (CORE) voltage to 1.125V */
+	if (tps65217_voltage_update(TPS65217_DEFDCDC3,
+				    TPS65217_DCDC_VOLT_SEL_1125MV)) {
+		puts("tps65217_voltage_update failure\n");
+		return;
+	}
+	/* Set CORE Frequencies to OPP100 */
+	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+
+	/* Set DCDC2 (MPU) voltage */
+	if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
+		puts("tps65217_voltage_update failure\n");
+		return;
+	}
+
+	/* Set LDO3 to 1.8V and LDO4 to 3.3V */
+	if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
+			       TPS65217_DEFLS1,
+			       TPS65217_LDO_VOLTAGE_OUT_1_8,
+			       TPS65217_LDO_MASK))
+		puts("tps65217_reg_write failure\n");
+
+	if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
+			       TPS65217_DEFLS2,
+			       TPS65217_LDO_VOLTAGE_OUT_3_3,
+			       TPS65217_LDO_MASK))
+		puts("tps65217_reg_write failure\n");
+
+	/* Set MPU Frequency to what we detected now that voltages are set */
+	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
+#define OSC	(V_OSCK/1000000)
+const struct dpll_params dpll_ddr_chilisom = {
+		400, OSC-1, 1, -1, -1, -1, -1};
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	return &dpll_ddr_chilisom;
+}
+
+const struct ctrl_ioregs ioregs_chilisom = {
+	.cm0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
+	.cm1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
+	.cm2ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
+	.dt0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
+	.dt1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
+};
+
+void sdram_init(void)
+{
+	config_ddr(400, &ioregs_chilisom,
+		   &ddr3_chilisom_data,
+		   &ddr3_chilisom_cmd_ctrl_data,
+		   &ddr3_chilisom_emif_reg_data, 0);
+}
+
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/clk_synthesizer.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/clk_synthesizer.c
new file mode 100644
index 000000000..59f0d8ea7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/clk_synthesizer.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * clk-synthesizer.c
+ *
+ * Clock synthesizer apis
+ *
+ * Copyright (C) 2016, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+
+#include <common.h>
+#include <asm/arch/clk_synthesizer.h>
+#include <i2c.h>
+
+/**
+ * clk_synthesizer_reg_read - Read register from synthesizer.
+ * dev:		i2c bus device (not used if CONFIG_DM_I2C is not set)
+ * @addr:	addr within the i2c device
+ * buf:		Buffer to which value is to be read.
+ *
+ * For reading the register from this clock synthesizer, a command needs to
+ * be send along with enabling byte read more, and then read can happen.
+ * Returns 0 on success
+ */
+static int clk_synthesizer_reg_read(struct udevice *dev, int addr, u8 *buf)
+{
+	int rc;
+
+	/* Enable Bye read */
+	addr = addr | CLK_SYNTHESIZER_BYTE_MODE;
+
+#if !CONFIG_IS_ENABLED(DM_I2C)
+	/* Send the command byte */
+	rc = i2c_write(CLK_SYNTHESIZER_I2C_ADDR, addr, 1, buf, 1);
+	if (rc)
+		printf("Failed to send command to clock synthesizer\n");
+
+	/* Read the Data */
+	return i2c_read(CLK_SYNTHESIZER_I2C_ADDR, addr, 1, buf, 1);
+#else
+	/* Send the command byte */
+	rc = dm_i2c_reg_write(dev, addr, *buf);
+	if (rc)
+		printf("Failed to send command to clock synthesizer\n");
+
+	/* Read the Data */
+	rc = dm_i2c_reg_read(dev, addr);
+	if (rc < 0)
+		return rc;
+
+	*buf = (u8)rc;
+	return 0;
+#endif
+
+}
+
+/**
+ * clk_synthesizer_reg_write - Write a value to register in synthesizer.
+ * dev:		i2c bus device (not used if CONFIG_DM_I2C is not set)
+ * @addr:	addr within the i2c device
+ * val:		Value to be written in the addr.
+ *
+ * Enable the byte read mode in the address and start the i2c transfer.
+ * Returns 0 on success
+ */
+static int clk_synthesizer_reg_write(struct udevice *dev, int addr, u8 val)
+{
+	u8 cmd[2];
+	int rc = 0;
+
+	/* Enable byte write */
+	cmd[0] = addr | CLK_SYNTHESIZER_BYTE_MODE;
+	cmd[1] = val;
+
+#if !CONFIG_IS_ENABLED(DM_I2C)
+	rc = i2c_write(CLK_SYNTHESIZER_I2C_ADDR, addr, 1, cmd, 2);
+#else
+	rc = dm_i2c_write(dev, addr, cmd, 2);
+#endif
+	if (rc)
+		printf("Clock synthesizer reg write failed at addr = 0x%x\n",
+		       addr);
+	return rc;
+}
+
+/**
+ * setup_clock_syntherizer - Program the clock synthesizer to get the desired
+ *				frequency.
+ * @data: Data containing the desired output
+ *
+ * This is a PLL-based high performance synthesizer which gives 3 outputs
+ * as per the PLL_DIV and load capacitor programmed.
+ */
+int setup_clock_synthesizer(struct clk_synth *data)
+{
+	int rc;
+	u8 val = 0;
+	struct udevice *dev = NULL;
+#if !CONFIG_IS_ENABLED(DM_I2C)
+	rc =  i2c_probe(CLK_SYNTHESIZER_I2C_ADDR);
+	if (rc) {
+		printf("i2c probe failed at address 0x%x\n",
+		       CLK_SYNTHESIZER_I2C_ADDR);
+		return rc;
+	}
+#else
+	rc = i2c_get_chip_for_busnum(0, CLK_SYNTHESIZER_I2C_ADDR, 1, &dev);
+	if (rc) {
+		printf("failed to get device for synthesizer at address 0x%x\n",
+		       CLK_SYNTHESIZER_I2C_ADDR);
+		return rc;
+	}
+#endif
+	rc = clk_synthesizer_reg_read(dev, CLK_SYNTHESIZER_ID_REG, &val);
+	if (val != data->id)
+		return rc;
+
+	/* Crystal Load capacitor selection */
+	rc = clk_synthesizer_reg_write(dev, CLK_SYNTHESIZER_XCSEL,
+				       data->capacitor);
+	if (rc)
+		return rc;
+	rc = clk_synthesizer_reg_write(dev, CLK_SYNTHESIZER_MUX_REG,
+				       data->mux);
+	if (rc)
+		return rc;
+	rc = clk_synthesizer_reg_write(dev, CLK_SYNTHESIZER_PDIV2_REG,
+				       data->pdiv2);
+	if (rc)
+		return rc;
+	rc = clk_synthesizer_reg_write(dev, CLK_SYNTHESIZER_PDIV3_REG,
+				       data->pdiv3);
+	if (rc)
+		return rc;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/clock.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock.c
new file mode 100644
index 000000000..130ee6c6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * clock.c
+ *
+ * Clock initialization for AM33XX boards.
+ * Derived from OMAP4 boards
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+#include <common.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+
+static void setup_post_dividers(const struct dpll_regs *dpll_regs,
+			 const struct dpll_params *params)
+{
+	/* Setup post-dividers */
+	if (params->m2 >= 0)
+		writel(params->m2, dpll_regs->cm_div_m2_dpll);
+	if (params->m3 >= 0)
+		writel(params->m3, dpll_regs->cm_div_m3_dpll);
+	if (params->m4 >= 0)
+		writel(params->m4, dpll_regs->cm_div_m4_dpll);
+	if (params->m5 >= 0)
+		writel(params->m5, dpll_regs->cm_div_m5_dpll);
+	if (params->m6 >= 0)
+		writel(params->m6, dpll_regs->cm_div_m6_dpll);
+}
+
+static inline void do_lock_dpll(const struct dpll_regs *dpll_regs)
+{
+	clrsetbits_le32(dpll_regs->cm_clkmode_dpll,
+			CM_CLKMODE_DPLL_DPLL_EN_MASK,
+			DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_lock(const struct dpll_regs *dpll_regs)
+{
+	if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
+			   (void *)dpll_regs->cm_idlest_dpll, LDELAY)) {
+		printf("DPLL locking failed for 0x%x\n",
+		       dpll_regs->cm_clkmode_dpll);
+		hang();
+	}
+}
+
+static inline void do_bypass_dpll(const struct dpll_regs *dpll_regs)
+{
+	clrsetbits_le32(dpll_regs->cm_clkmode_dpll,
+			CM_CLKMODE_DPLL_DPLL_EN_MASK,
+			DPLL_EN_MN_BYPASS << CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_bypass(const struct dpll_regs *dpll_regs)
+{
+	if (!wait_on_value(ST_DPLL_CLK_MASK, 0,
+			   (void *)dpll_regs->cm_idlest_dpll, LDELAY)) {
+		printf("Bypassing DPLL failed 0x%x\n",
+		       dpll_regs->cm_clkmode_dpll);
+	}
+}
+
+static void bypass_dpll(const struct dpll_regs *dpll_regs)
+{
+	do_bypass_dpll(dpll_regs);
+	wait_for_bypass(dpll_regs);
+}
+
+void do_setup_dpll(const struct dpll_regs *dpll_regs,
+		   const struct dpll_params *params)
+{
+	u32 temp;
+
+	if (!params)
+		return;
+
+	temp = readl(dpll_regs->cm_clksel_dpll);
+
+	bypass_dpll(dpll_regs);
+
+	/* Set M & N */
+	temp &= ~CM_CLKSEL_DPLL_M_MASK;
+	temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK;
+
+	temp &= ~CM_CLKSEL_DPLL_N_MASK;
+	temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK;
+
+	writel(temp, dpll_regs->cm_clksel_dpll);
+
+	setup_post_dividers(dpll_regs, params);
+
+	/* Wait till the DPLL locks */
+	do_lock_dpll(dpll_regs);
+	wait_for_lock(dpll_regs);
+}
+
+static void setup_dplls(void)
+{
+	const struct dpll_params *params;
+
+	params = get_dpll_core_params();
+	do_setup_dpll(&dpll_core_regs, params);
+
+	params = get_dpll_mpu_params();
+	do_setup_dpll(&dpll_mpu_regs, params);
+
+	params = get_dpll_per_params();
+	do_setup_dpll(&dpll_per_regs, params);
+	writel(0x300, &cmwkup->clkdcoldodpllper);
+
+	params = get_dpll_ddr_params();
+	do_setup_dpll(&dpll_ddr_regs, params);
+}
+
+static inline void wait_for_clk_enable(u32 *clkctrl_addr)
+{
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+	u32 bound = LDELAY;
+
+	while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+		(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+		clkctrl = readl(clkctrl_addr);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			 MODULE_CLKCTRL_IDLEST_SHIFT;
+		if (--bound == 0) {
+			printf("Clock enable failed for 0x%p idlest 0x%x\n",
+			       clkctrl_addr, clkctrl);
+			return;
+		}
+	}
+}
+
+static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
+				       u32 wait_for_enable)
+{
+	clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+			enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	debug("Enable clock module - %p\n", clkctrl_addr);
+	if (wait_for_enable)
+		wait_for_clk_enable(clkctrl_addr);
+}
+
+static inline void wait_for_clk_disable(u32 *clkctrl_addr)
+{
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL;
+	u32 bound = LDELAY;
+
+	while ((idlest != MODULE_CLKCTRL_IDLEST_DISABLED)) {
+		clkctrl = readl(clkctrl_addr);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			  MODULE_CLKCTRL_IDLEST_SHIFT;
+		if (--bound == 0) {
+			printf("Clock disable failed for 0x%p idlest 0x%x\n",
+			       clkctrl_addr, clkctrl);
+			 return;
+		}
+	}
+}
+static inline void disable_clock_module(u32 *const clkctrl_addr,
+					u32 wait_for_disable)
+{
+	clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_DISABLE <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	debug("Disable clock module - %p\n", clkctrl_addr);
+	if (wait_for_disable)
+		wait_for_clk_disable(clkctrl_addr);
+}
+
+static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
+{
+	clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+			enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
+	debug("Enable clock domain - %p\n", clkctrl_reg);
+}
+
+static inline void disable_clock_domain(u32 *const clkctrl_reg)
+{
+	clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_SW_SLEEP <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
+	debug("Disable clock domain - %p\n", clkctrl_reg);
+}
+
+void do_enable_clocks(u32 *const *clk_domains,
+		      u32 *const *clk_modules_explicit_en, u8 wait_for_enable)
+{
+	u32 i, max = 100;
+
+	/* Put the clock domains in SW_WKUP mode */
+	for (i = 0; (i < max) && clk_domains && clk_domains[i]; i++) {
+		enable_clock_domain(clk_domains[i],
+				    CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+	}
+
+	/* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+	for (i = 0; (i < max) && clk_modules_explicit_en &&
+	     clk_modules_explicit_en[i]; i++) {
+		enable_clock_module(clk_modules_explicit_en[i],
+				    MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+				    wait_for_enable);
+	};
+}
+
+void do_disable_clocks(u32 *const *clk_domains,
+			u32 *const *clk_modules_disable,
+			u8 wait_for_disable)
+{
+	u32 i, max = 100;
+
+
+	/* Clock modules that need to be put in SW_DISABLE */
+	for (i = 0; (i < max) && clk_modules_disable && clk_modules_disable[i];
+	     i++)
+		disable_clock_module(clk_modules_disable[i],
+				     wait_for_disable);
+
+	/* Put the clock domains in SW_SLEEP mode */
+	for (i = 0; (i < max) && clk_domains && clk_domains[i]; i++)
+		disable_clock_domain(clk_domains[i]);
+}
+
+/*
+ * Before scaling up the clocks we need to have the PMIC scale up the
+ * voltages first.  This will be dependent on which PMIC is in use
+ * and in some cases we may not be scaling things up at all and thus not
+ * need to do anything here.
+ */
+__weak void scale_vcores(void)
+{
+}
+
+void setup_early_clocks(void)
+{
+	setup_clocks_for_console();
+	enable_basic_clocks();
+	timer_init();
+}
+
+void prcm_init(void)
+{
+	scale_vcores();
+	setup_dplls();
+}
+
+void rtc_only_prcm_init(void)
+{
+	const struct dpll_params *params;
+
+	rtc_only_enable_basic_clocks();
+
+	params = get_dpll_ddr_params();
+	do_setup_dpll(&dpll_ddr_regs, params);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_am33xx.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_am33xx.c
new file mode 100644
index 000000000..3a7ac6026
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_am33xx.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * clock_am33xx.c
+ *
+ * clocks for AM33XX based boards
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+#define OSC	(V_OSCK/1000000)
+
+struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
+struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
+struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
+struct cm_rtc *const cmrtc = (struct cm_rtc *)CM_RTC;
+
+const struct dpll_regs dpll_mpu_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x88,
+	.cm_idlest_dpll		= CM_WKUP + 0x20,
+	.cm_clksel_dpll		= CM_WKUP + 0x2C,
+	.cm_div_m2_dpll		= CM_WKUP + 0xA8,
+};
+
+const struct dpll_regs dpll_core_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x90,
+	.cm_idlest_dpll		= CM_WKUP + 0x5C,
+	.cm_clksel_dpll		= CM_WKUP + 0x68,
+	.cm_div_m4_dpll		= CM_WKUP + 0x80,
+	.cm_div_m5_dpll		= CM_WKUP + 0x84,
+	.cm_div_m6_dpll		= CM_WKUP + 0xD8,
+};
+
+const struct dpll_regs dpll_per_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x8C,
+	.cm_idlest_dpll		= CM_WKUP + 0x70,
+	.cm_clksel_dpll		= CM_WKUP + 0x9C,
+	.cm_div_m2_dpll		= CM_WKUP + 0xAC,
+};
+
+const struct dpll_regs dpll_ddr_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x94,
+	.cm_idlest_dpll		= CM_WKUP + 0x34,
+	.cm_clksel_dpll		= CM_WKUP + 0x40,
+	.cm_div_m2_dpll		= CM_WKUP + 0xA0,
+};
+
+const struct dpll_regs dpll_disp_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x98,
+	.cm_idlest_dpll		= CM_WKUP + 0x48,
+	.cm_clksel_dpll		= CM_WKUP + 0x54,
+	.cm_div_m2_dpll		= CM_WKUP + 0xA4,
+};
+
+struct dpll_params dpll_mpu_opp100 = {
+		CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1};
+const struct dpll_params dpll_core_opp100 = {
+		1000, OSC-1, -1, -1, 10, 8, 4};
+
+const struct dpll_params dpll_mpu_opp[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
+	{	/* 19.2 MHz */
+		{125, 3, 2, -1, -1, -1, -1},	/* OPP 50 */
+		{-1, -1, -1, -1, -1, -1, -1},	/* OPP RESERVED	*/
+		{125, 3, 1, -1, -1, -1, -1},	/* OPP 100 */
+		{150, 3, 1, -1, -1, -1, -1},	/* OPP 120 */
+		{125, 2, 1, -1, -1, -1, -1},	/* OPP TB */
+		{625, 11, 1, -1, -1, -1, -1}	/* OPP NT */
+	},
+	{	/* 24 MHz */
+		{25, 0, 2, -1, -1, -1, -1},	/* OPP 50 */
+		{-1, -1, -1, -1, -1, -1, -1},	/* OPP RESERVED	*/
+		{25, 0, 1, -1, -1, -1, -1},	/* OPP 100 */
+		{30, 0, 1, -1, -1, -1, -1},	/* OPP 120 */
+		{100, 2, 1, -1, -1, -1, -1},	/* OPP TB */
+		{125, 2, 1, -1, -1, -1, -1}	/* OPP NT */
+	},
+	{	/* 25 MHz */
+		{24, 0, 2, -1, -1, -1, -1},	/* OPP 50 */
+		{-1, -1, -1, -1, -1, -1, -1},	/* OPP RESERVED	*/
+		{24, 0, 1, -1, -1, -1, -1},	/* OPP 100 */
+		{144, 4, 1, -1, -1, -1, -1},	/* OPP 120 */
+		{32, 0, 1, -1, -1, -1, -1},	/* OPP TB */
+		{40, 0, 1, -1, -1, -1, -1}	/* OPP NT */
+	},
+	{	/* 26 MHz */
+		{300, 12, 2, -1, -1, -1, -1},	/* OPP 50 */
+		{-1, -1, -1, -1, -1, -1, -1},	/* OPP RESERVED	*/
+		{300, 12, 1, -1, -1, -1, -1},	/* OPP 100 */
+		{360, 12, 1, -1, -1, -1, -1},	/* OPP 120 */
+		{400, 12, 1, -1, -1, -1, -1},	/* OPP TB */
+		{500, 12, 1, -1, -1, -1, -1}	/* OPP NT */
+	},
+};
+
+const struct dpll_params dpll_core_1000MHz[NUM_CRYSTAL_FREQ] = {
+		{625, 11, -1, -1, 10, 8, 4},	/* 19.2 MHz */
+		{125, 2, -1, -1, 10, 8, 4},	/* 24 MHz */
+		{40, 0, -1, -1, 10, 8, 4},	/* 25 MHz */
+		{500, 12, -1, -1, 10, 8, 4}	/* 26 MHz */
+};
+
+const struct dpll_params dpll_per_192MHz[NUM_CRYSTAL_FREQ] = {
+		{400, 7, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+		{400, 9, 5, -1, -1, -1, -1},	/* 24 MHz */
+		{384, 9, 5, -1, -1, -1, -1},	/* 25 MHz */
+		{480, 12, 5, -1, -1, -1, -1}	/* 26 MHz */
+};
+
+const struct dpll_params dpll_ddr3_303MHz[NUM_CRYSTAL_FREQ] = {
+		{505, 15, 2, -1, -1, -1, -1}, /*19.2*/
+		{101, 3, 2, -1, -1, -1, -1}, /* 24 MHz */
+		{303, 24, 1, -1, -1, -1, -1}, /* 25 MHz */
+		{303, 12, 2, -1, -1, -1, -1}  /* 26 MHz */
+};
+
+const struct dpll_params dpll_ddr3_400MHz[NUM_CRYSTAL_FREQ] = {
+		{125, 5, 1, -1, -1, -1, -1}, /*19.2*/
+		{50, 2, 1, -1, -1, -1, -1}, /* 24 MHz */
+		{16, 0, 1, -1, -1, -1, -1}, /* 25 MHz */
+		{200, 12, 1, -1, -1, -1, -1}  /* 26 MHz */
+};
+
+const struct dpll_params dpll_ddr2_266MHz[NUM_CRYSTAL_FREQ] = {
+		{665, 47, 1, -1, -1, -1, -1}, /*19.2*/
+		{133, 11, 1, -1, -1, -1, -1}, /* 24 MHz */
+		{266, 24, 1, -1, -1, -1, -1}, /* 25 MHz */
+		{133, 12, 1, -1, -1, -1, -1}  /* 26 MHz */
+};
+
+__weak const struct dpll_params *get_dpll_mpu_params(void)
+{
+	return &dpll_mpu_opp100;
+}
+
+const struct dpll_params *get_dpll_core_params(void)
+{
+	int ind = get_sys_clk_index();
+
+	return &dpll_core_1000MHz[ind];
+}
+
+const struct dpll_params *get_dpll_per_params(void)
+{
+	int ind = get_sys_clk_index();
+
+	return &dpll_per_192MHz[ind];
+}
+
+void setup_clocks_for_console(void)
+{
+	clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
+
+	clrsetbits_le32(&cmper->l4hsclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
+
+	clrsetbits_le32(&cmwkup->wkup_uart0ctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart1clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart2clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart3clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart4clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart5clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
+
+void enable_basic_clocks(void)
+{
+	u32 *const clk_domains[] = {
+		&cmper->l3clkstctrl,
+		&cmper->l4fwclkstctrl,
+		&cmper->l3sclkstctrl,
+		&cmper->l4lsclkstctrl,
+		&cmwkup->wkclkstctrl,
+		&cmper->emiffwclkctrl,
+		&cmrtc->clkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en[] = {
+		&cmper->l3clkctrl,
+		&cmper->l4lsclkctrl,
+		&cmper->l4fwclkctrl,
+		&cmwkup->wkl4wkclkctrl,
+		&cmper->l3instrclkctrl,
+		&cmper->l4hsclkctrl,
+		&cmwkup->wkgpio0clkctrl,
+		&cmwkup->wkctrlclkctrl,
+		&cmper->timer2clkctrl,
+		&cmper->gpmcclkctrl,
+		&cmper->elmclkctrl,
+		&cmper->mmc0clkctrl,
+		&cmper->mmc1clkctrl,
+		&cmwkup->wkup_i2c0ctrl,
+		&cmper->gpio1clkctrl,
+		&cmper->gpio2clkctrl,
+		&cmper->gpio3clkctrl,
+		&cmper->i2c1clkctrl,
+		&cmper->i2c2clkctrl,
+		&cmper->cpgmac0clkctrl,
+		&cmper->spi0clkctrl,
+		&cmrtc->rtcclkctrl,
+		&cmper->usb0clkctrl,
+		&cmper->emiffwclkctrl,
+		&cmper->emifclkctrl,
+#if CONFIG_IS_ENABLED(AM335X_LCD) && !CONFIG_IS_ENABLED(DM_VIDEO)
+		&cmper->lcdclkctrl,
+		&cmper->lcdcclkstctrl,
+#endif
+		0
+	};
+
+	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
+
+	/* Select the Master osc 24 MHZ as Timer2 clock source */
+	writel(0x1, &cmdpll->clktimer2clk);
+}
+
+/*
+ * Enable Spread Spectrum for the MPU by calculating the required
+ * values and setting the registers accordingly.
+ * @param permille The spreading in permille (10th of a percent)
+ */
+void set_mpu_spreadspectrum(int permille)
+{
+	u32 multiplier_m;
+	u32 predivider_n;
+	u32 cm_clksel_dpll_mpu;
+	u32 cm_clkmode_dpll_mpu;
+	u32 ref_clock;
+	u32 pll_bandwidth;
+	u32 mod_freq_divider;
+	u32 exponent;
+	u32 mantissa;
+	u32 delta_m_step;
+
+	printf("Enabling Spread Spectrum of %d permille for MPU\n",
+	       permille);
+
+	/* Read PLL parameter m and n */
+	cm_clksel_dpll_mpu = readl(&cmwkup->clkseldpllmpu);
+	multiplier_m = (cm_clksel_dpll_mpu >> 8) & 0x3FF;
+	predivider_n = cm_clksel_dpll_mpu & 0x7F;
+
+	/*
+	 * Calculate reference clock (clock after pre-divider),
+	 * its max. PLL bandwidth,
+	 * and resulting mod_freq_divider
+	 */
+	ref_clock = V_OSCK / (predivider_n + 1);
+	pll_bandwidth = ref_clock / 70;
+	mod_freq_divider = ref_clock / (4 * pll_bandwidth);
+
+	/* Calculate Mantissa/Exponent */
+	exponent = 0;
+	mantissa = mod_freq_divider;
+	while ((mantissa > 127) && (exponent < 7)) {
+		exponent++;
+		mantissa /= 2;
+	}
+	if (mantissa > 127)
+		mantissa = 127;
+
+	mod_freq_divider = mantissa << exponent;
+
+	/*
+	 * Calculate Modulation steps
+	 * As we use Downspread only, the spread is twice the value of
+	 * permille, so Div2!
+	 * As it takes the value in percent, divide by ten!
+	 */
+	delta_m_step = ((u32)((multiplier_m * permille) / 10 / 2)) << 18;
+	delta_m_step /= 100;
+	delta_m_step /= mod_freq_divider;
+	if (delta_m_step > 0xFFFFF)
+		delta_m_step = 0xFFFFF;
+
+	/* Setup Spread Spectrum */
+	writel(delta_m_step, &cmwkup->sscdeltamstepdllmpu);
+	writel((exponent << 8) | mantissa, &cmwkup->sscmodfreqdivdpllmpu);
+	cm_clkmode_dpll_mpu = readl(&cmwkup->clkmoddpllmpu);
+	/* clear all SSC flags */
+	cm_clkmode_dpll_mpu &= ~(0xF << CM_CLKMODE_DPLL_SSC_EN_SHIFT);
+	/* enable SSC with Downspread only */
+	cm_clkmode_dpll_mpu |=  CM_CLKMODE_DPLL_SSC_EN_MASK |
+				CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK;
+	writel(cm_clkmode_dpll_mpu, &cmwkup->clkmoddpllmpu);
+	while (!(readl(&cmwkup->clkmoddpllmpu) & 0x2000))
+		;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_am43xx.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_am43xx.c
new file mode 100644
index 000000000..b98bb9989
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_am43xx.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * clock_am43xx.c
+ *
+ * clocks for AM43XX based boards
+ * Derived from AM33XX based boards
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+
+struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
+struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
+struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
+
+const struct dpll_regs dpll_mpu_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x560,
+	.cm_idlest_dpll		= CM_WKUP + 0x564,
+	.cm_clksel_dpll		= CM_WKUP + 0x56c,
+	.cm_div_m2_dpll		= CM_WKUP + 0x570,
+};
+
+const struct dpll_regs dpll_core_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x520,
+	.cm_idlest_dpll		= CM_WKUP + 0x524,
+	.cm_clksel_dpll		= CM_WKUP + 0x52C,
+	.cm_div_m4_dpll		= CM_WKUP + 0x538,
+	.cm_div_m5_dpll		= CM_WKUP + 0x53C,
+	.cm_div_m6_dpll		= CM_WKUP + 0x540,
+};
+
+const struct dpll_regs dpll_per_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x5E0,
+	.cm_idlest_dpll		= CM_WKUP + 0x5E4,
+	.cm_clksel_dpll		= CM_WKUP + 0x5EC,
+	.cm_div_m2_dpll		= CM_WKUP + 0x5F0,
+};
+
+const struct dpll_regs dpll_ddr_regs = {
+	.cm_clkmode_dpll	= CM_WKUP + 0x5A0,
+	.cm_idlest_dpll		= CM_WKUP + 0x5A4,
+	.cm_clksel_dpll		= CM_WKUP + 0x5AC,
+	.cm_div_m2_dpll		= CM_WKUP + 0x5B0,
+	.cm_div_m4_dpll		= CM_WKUP + 0x5B8,
+};
+
+void setup_clocks_for_console(void)
+{
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+
+	/* Do not add any spl_debug prints in this function */
+	clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
+
+	/* Enable UART0 */
+	clrsetbits_le32(&cmwkup->wkup_uart0ctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+	while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+		(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+		clkctrl = readl(&cmwkup->wkup_uart0ctrl);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			 MODULE_CLKCTRL_IDLEST_SHIFT;
+	}
+}
+
+void enable_basic_clocks(void)
+{
+	u32 *const clk_domains[] = {
+		&cmper->l3clkstctrl,
+		&cmper->l3sclkstctrl,
+		&cmper->l4lsclkstctrl,
+		&cmwkup->wkclkstctrl,
+		&cmper->emifclkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en[] = {
+		&cmper->l3clkctrl,
+		&cmper->l4lsclkctrl,
+		&cmper->l4fwclkctrl,
+		&cmwkup->wkl4wkclkctrl,
+		&cmper->l3instrclkctrl,
+		&cmper->l4hsclkctrl,
+		&cmwkup->wkgpio0clkctrl,
+		&cmwkup->wkctrlclkctrl,
+		&cmper->timer2clkctrl,
+		&cmper->gpmcclkctrl,
+		&cmper->elmclkctrl,
+		&cmper->mmc0clkctrl,
+		&cmper->mmc1clkctrl,
+		&cmwkup->wkup_i2c0ctrl,
+		&cmper->gpio1clkctrl,
+		&cmper->gpio2clkctrl,
+		&cmper->gpio3clkctrl,
+		&cmper->gpio4clkctrl,
+		&cmper->gpio5clkctrl,
+		&cmper->i2c1clkctrl,
+		&cmper->cpgmac0clkctrl,
+		&cmper->emiffwclkctrl,
+		&cmper->emifclkctrl,
+		&cmper->otfaemifclkctrl,
+		&cmper->qspiclkctrl,
+		&cmper->spi0clkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
+
+	/* Select the Master osc clk as Timer2 clock source */
+	writel(0x1, &cmdpll->clktimer2clk);
+
+	/* For OPP100 the mac clock should be /5. */
+	writel(0x4, &cmdpll->clkselmacclk);
+}
+
+void rtc_only_enable_basic_clocks(void)
+{
+	u32 *const clk_domains[] = {
+		&cmper->emifclkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en[] = {
+		&cmper->gpio5clkctrl,
+		&cmper->emiffwclkctrl,
+		&cmper->emifclkctrl,
+		&cmper->otfaemifclkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
+
+	/* Select the Master osc clk as Timer2 clock source */
+	writel(0x1, &cmdpll->clktimer2clk);
+}
+
+#ifdef CONFIG_TI_EDMA3
+void enable_edma3_clocks(void)
+{
+	u32 *const clk_domains_edma3[] = {
+		0
+	};
+
+	u32 *const clk_modules_explicit_en_edma3[] = {
+		&cmper->tpccclkctrl,
+		&cmper->tptc0clkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains_edma3,
+			 clk_modules_explicit_en_edma3,
+			 1);
+}
+
+void disable_edma3_clocks(void)
+{
+	u32 *const clk_domains_edma3[] = {
+		0
+	};
+
+	u32 *const clk_modules_disable_edma3[] = {
+		&cmper->tpccclkctrl,
+		&cmper->tptc0clkctrl,
+		0
+	};
+
+	do_disable_clocks(clk_domains_edma3,
+			  clk_modules_disable_edma3,
+			  1);
+}
+#endif
+
+#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
+void enable_usb_clocks(int index)
+{
+	u32 *usbclkctrl = 0;
+	u32 *usbphyocp2scpclkctrl = 0;
+
+	if (index == 0) {
+		usbclkctrl = &cmper->usb0clkctrl;
+		usbphyocp2scpclkctrl = &cmper->usbphyocp2scp0clkctrl;
+		setbits_le32(&cmper->usb0clkctrl,
+			     USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
+		setbits_le32(&cmwkup->usbphy0clkctrl,
+			     USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
+	} else if (index == 1) {
+		usbclkctrl = &cmper->usb1clkctrl;
+		usbphyocp2scpclkctrl = &cmper->usbphyocp2scp1clkctrl;
+		setbits_le32(&cmper->usb1clkctrl,
+			     USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
+		setbits_le32(&cmwkup->usbphy1clkctrl,
+			     USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
+	}
+
+	u32 *const clk_domains_usb[] = {
+		0
+	};
+
+	u32 *const clk_modules_explicit_en_usb[] = {
+		usbclkctrl,
+		usbphyocp2scpclkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains_usb, clk_modules_explicit_en_usb, 1);
+}
+
+void disable_usb_clocks(int index)
+{
+	u32 *usbclkctrl = 0;
+	u32 *usbphyocp2scpclkctrl = 0;
+
+	if (index == 0) {
+		usbclkctrl = &cmper->usb0clkctrl;
+		usbphyocp2scpclkctrl = &cmper->usbphyocp2scp0clkctrl;
+		clrbits_le32(&cmper->usb0clkctrl,
+			     USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
+		clrbits_le32(&cmwkup->usbphy0clkctrl,
+			     USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
+	} else if (index == 1) {
+		usbclkctrl = &cmper->usb1clkctrl;
+		usbphyocp2scpclkctrl = &cmper->usbphyocp2scp1clkctrl;
+		clrbits_le32(&cmper->usb1clkctrl,
+			     USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
+		clrbits_le32(&cmwkup->usbphy1clkctrl,
+			     USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
+	}
+
+	u32 *const clk_domains_usb[] = {
+		0
+	};
+
+	u32 *const clk_modules_disable_usb[] = {
+		usbclkctrl,
+		usbphyocp2scpclkctrl,
+		0
+	};
+
+	do_disable_clocks(clk_domains_usb, clk_modules_disable_usb, 1);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_ti814x.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_ti814x.c
new file mode 100644
index 000000000..27abaff48
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_ti814x.c
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * clock_ti814x.c
+ *
+ * Clocks for TI814X based boards
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+/* PRCM */
+#define PRCM_MOD_EN		0x2
+
+/* CLK_SRC */
+#define OSC_SRC0		0
+#define OSC_SRC1		1
+
+#define L3_OSC_SRC		OSC_SRC0
+
+#define OSC_0_FREQ		20
+
+#define DCO_HS2_MIN		500
+#define DCO_HS2_MAX		1000
+#define DCO_HS1_MIN		1000
+#define DCO_HS1_MAX		2000
+
+#define SELFREQDCO_HS2		0x00000801
+#define SELFREQDCO_HS1		0x00001001
+
+#define MPU_N			0x1
+#define MPU_M			0x3C
+#define MPU_M2			1
+#define MPU_CLKCTRL		0x1
+
+#define L3_N			19
+#define L3_M			880
+#define L3_M2			4
+#define L3_CLKCTRL		0x801
+
+#define DDR_N			19
+#define DDR_M			666
+#define DDR_M2			2
+#define DDR_CLKCTRL		0x801
+
+/* ADPLLJ register values */
+#define ADPLLJ_CLKCTRL_HS2	0x00000801 /* HS2 mode, TINT2 = 1 */
+#define ADPLLJ_CLKCTRL_HS1	0x00001001 /* HS1 mode, TINT2 = 1 */
+#define ADPLLJ_CLKCTRL_CLKDCOLDOEN	(1 << 29)
+#define ADPLLJ_CLKCTRL_IDLE		(1 << 23)
+#define ADPLLJ_CLKCTRL_CLKOUTEN		(1 << 20)
+#define ADPLLJ_CLKCTRL_CLKOUTLDOEN	(1 << 19)
+#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ	(1 << 17)
+#define ADPLLJ_CLKCTRL_LPMODE		(1 << 12)
+#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN	(1 << 11)
+#define ADPLLJ_CLKCTRL_REGM4XEN		(1 << 10)
+#define ADPLLJ_CLKCTRL_TINITZ		(1 << 0)
+#define ADPLLJ_CLKCTRL_CLKDCO		(ADPLLJ_CLKCTRL_CLKDCOLDOEN | \
+					 ADPLLJ_CLKCTRL_CLKOUTEN | \
+					 ADPLLJ_CLKCTRL_CLKOUTLDOEN | \
+					 ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ)
+
+#define ADPLLJ_STATUS_PHASELOCK		(1 << 10)
+#define ADPLLJ_STATUS_FREQLOCK		(1 << 9)
+#define ADPLLJ_STATUS_PHSFRQLOCK	(ADPLLJ_STATUS_PHASELOCK | \
+					 ADPLLJ_STATUS_FREQLOCK)
+#define ADPLLJ_STATUS_BYPASSACK		(1 << 8)
+#define ADPLLJ_STATUS_BYPASS		(1 << 0)
+#define ADPLLJ_STATUS_BYPASSANDACK	(ADPLLJ_STATUS_BYPASSACK | \
+					 ADPLLJ_STATUS_BYPASS)
+
+#define ADPLLJ_TENABLE_ENB		(1 << 0)
+#define ADPLLJ_TENABLEDIV_ENB		(1 << 0)
+
+#define ADPLLJ_M2NDIV_M2SHIFT		16
+
+#define MPU_PLL_BASE			(PLL_SUBSYS_BASE + 0x048)
+#define L3_PLL_BASE			(PLL_SUBSYS_BASE + 0x110)
+#define DDR_PLL_BASE			(PLL_SUBSYS_BASE + 0x290)
+
+struct ad_pll {
+	unsigned int pwrctrl;
+	unsigned int clkctrl;
+	unsigned int tenable;
+	unsigned int tenablediv;
+	unsigned int m2ndiv;
+	unsigned int mn2div;
+	unsigned int fracdiv;
+	unsigned int bwctrl;
+	unsigned int fracctrl;
+	unsigned int status;
+	unsigned int m3div;
+	unsigned int rampctrl;
+};
+
+#define OSC_SRC_CTRL			(PLL_SUBSYS_BASE + 0x2C0)
+
+#define ENET_CLKCTRL_CMPL		0x30000
+
+#define SATA_PLL_BASE			(CTRL_BASE + 0x0720)
+
+struct sata_pll {
+	unsigned int pllcfg0;
+	unsigned int pllcfg1;
+	unsigned int pllcfg2;
+	unsigned int pllcfg3;
+	unsigned int pllcfg4;
+	unsigned int pllstatus;
+	unsigned int rxstatus;
+	unsigned int txstatus;
+	unsigned int testcfg;
+};
+
+#define SEL_IN_FREQ		(0x1 << 31)
+#define DIGCLRZ			(0x1 << 30)
+#define ENDIGLDO		(0x1 << 4)
+#define APLL_CP_CURR		(0x1 << 3)
+#define ENBGSC_REF		(0x1 << 2)
+#define ENPLLLDO		(0x1 << 1)
+#define ENPLL			(0x1 << 0)
+
+#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF)
+#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF)
+#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO)
+#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \
+			ENPLLLDO | ENPLL)
+
+#define PLL_LOCK		(0x1 << 0)
+
+#define ENSATAMODE		(0x1 << 31)
+#define PLLREFSEL		(0x1 << 30)
+#define MDIVINT			(0x4b << 18)
+#define EN_CLKAUX		(0x1 << 5)
+#define EN_CLK125M		(0x1 << 4)
+#define EN_CLK100M		(0x1 << 3)
+#define EN_CLK50M		(0x1 << 2)
+
+#define SATA_PLLCFG1 (ENSATAMODE |	\
+		      PLLREFSEL |	\
+		      MDIVINT |		\
+		      EN_CLKAUX |	\
+		      EN_CLK125M |	\
+		      EN_CLK100M |	\
+		      EN_CLK50M)
+
+#define DIGLDO_EN_CAPLESSMODE	(0x1 << 22)
+#define PLLDO_EN_LDO_STABLE	(0x1 << 11)
+#define PLLDO_EN_BUF_CUR	(0x1 << 7)
+#define PLLDO_EN_LP		(0x1 << 6)
+#define PLLDO_CTRL_TRIM_1_4V	(0x10 << 1)
+
+#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE |	\
+		      PLLDO_EN_LDO_STABLE |	\
+		      PLLDO_EN_BUF_CUR |	\
+		      PLLDO_EN_LP |		\
+		      PLLDO_CTRL_TRIM_1_4V)
+
+const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
+const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
+const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE;
+
+/*
+ * Enable the peripheral clock for required peripherals
+ */
+static void enable_per_clocks(void)
+{
+	/* HSMMC1 */
+	writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
+	while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
+		;
+
+	/* Ethernet */
+	writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl);
+	writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl);
+	while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0)
+		;
+	writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl);
+	while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0)
+		;
+
+	/* RTC clocks */
+	writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl);
+	writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl);
+	while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN)
+		;
+}
+
+/*
+ * select the HS1 or HS2 for DCO Freq
+ * return : CLKCTRL
+ */
+static u32 pll_dco_freq_sel(u32 clkout_dco)
+{
+	if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX)
+		return SELFREQDCO_HS2;
+	else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX)
+		return SELFREQDCO_HS1;
+	else
+		return -1;
+}
+
+/*
+ * select the sigma delta config
+ * return: sigma delta val
+ */
+static u32 pll_sigma_delta_val(u32 clkout_dco)
+{
+	u32 sig_val = 0;
+
+	sig_val = (clkout_dco + 225) / 250;
+	sig_val = sig_val << 24;
+
+	return sig_val;
+}
+
+/*
+ * configure individual ADPLLJ
+ */
+static void pll_config(u32 base, u32 n, u32 m, u32 m2,
+		       u32 clkctrl_val, int adpllj)
+{
+	const struct ad_pll *adpll = (struct ad_pll *)base;
+	u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0;
+	u32 sig_val = 0, hs_mod = 0;
+
+	m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n;
+	mn2val = m;
+
+	/* calculate clkout_dco */
+	clkout_dco = ((OSC_0_FREQ / (n+1)) * m);
+
+	/* sigma delta & Hs mode selection skip for ADPLLS*/
+	if (adpllj) {
+		sig_val = pll_sigma_delta_val(clkout_dco);
+		hs_mod = pll_dco_freq_sel(clkout_dco);
+	}
+
+	/* by-pass pll */
+	read_clkctrl = readl(&adpll->clkctrl);
+	writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl);
+	while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK)
+		!= ADPLLJ_STATUS_BYPASSANDACK)
+		;
+
+	/* clear TINITZ */
+	read_clkctrl = readl(&adpll->clkctrl);
+	writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
+
+	/*
+	 * ref_clk = 20/(n + 1);
+	 * clkout_dco = ref_clk * m;
+	 * clk_out = clkout_dco/m2;
+	*/
+	read_clkctrl = readl(&adpll->clkctrl) &
+			     ~(ADPLLJ_CLKCTRL_LPMODE |
+			     ADPLLJ_CLKCTRL_DRIFTGUARDIAN |
+			     ADPLLJ_CLKCTRL_REGM4XEN);
+	writel(m2nval, &adpll->m2ndiv);
+	writel(mn2val, &adpll->mn2div);
+
+	/* Skip for modena(ADPLLS) */
+	if (adpllj) {
+		writel(sig_val, &adpll->fracdiv);
+		writel((read_clkctrl | hs_mod), &adpll->clkctrl);
+	}
+
+	/* Load M2, N2 dividers of ADPLL */
+	writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
+	writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
+
+	/* Load M, N dividers of ADPLL */
+	writel(ADPLLJ_TENABLE_ENB, &adpll->tenable);
+	writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable);
+
+	/* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */
+	read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO;
+	if (adpllj)
+		writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO),
+						&adpll->clkctrl);
+
+	/* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */
+	read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE;
+	writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
+
+	/* Wait for phase and freq lock */
+	while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) !=
+	       ADPLLJ_STATUS_PHSFRQLOCK)
+		;
+}
+
+static void unlock_pll_control_mmr(void)
+{
+	/* TRM 2.10.1.4 and 3.2.7-3.2.11 */
+	writel(0x1EDA4C3D, 0x481C5040);
+	writel(0x2FF1AC2B, 0x48140060);
+	writel(0xF757FDC0, 0x48140064);
+	writel(0xE2BC3A6D, 0x48140068);
+	writel(0x1EBF131D, 0x4814006c);
+	writel(0x6F361E05, 0x48140070);
+}
+
+static void mpu_pll_config(void)
+{
+	pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0);
+}
+
+static void l3_pll_config(void)
+{
+	u32 l3_osc_src, rd_osc_src = 0;
+
+	l3_osc_src = L3_OSC_SRC;
+	rd_osc_src = readl(OSC_SRC_CTRL);
+
+	if (OSC_SRC0 == l3_osc_src)
+		writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL);
+	else
+		writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL);
+
+	pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1);
+}
+
+void ddr_pll_config(unsigned int ddrpll_m)
+{
+	pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1);
+}
+
+void sata_pll_config(void)
+{
+	/*
+	 * This sequence for configuring the SATA PLL
+	 * resident in the control module is documented
+	 * in TI8148 TRM section 21.3.1
+	 */
+	writel(SATA_PLLCFG1, &spll->pllcfg1);
+	udelay(50);
+
+	writel(SATA_PLLCFG3, &spll->pllcfg3);
+	udelay(50);
+
+	writel(SATA_PLLCFG0_1, &spll->pllcfg0);
+	udelay(50);
+
+	writel(SATA_PLLCFG0_2, &spll->pllcfg0);
+	udelay(50);
+
+	writel(SATA_PLLCFG0_3, &spll->pllcfg0);
+	udelay(50);
+
+	writel(SATA_PLLCFG0_4, &spll->pllcfg0);
+	udelay(50);
+
+	while (((readl(&spll->pllstatus) & PLL_LOCK) == 0))
+		;
+}
+
+void enable_dmm_clocks(void)
+{
+	writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
+	writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
+	writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
+	while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN)
+		;
+	writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
+	while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN)
+		;
+	while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
+		;
+	writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
+	while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN)
+		;
+	writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl);
+	while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
+		;
+}
+
+void setup_clocks_for_console(void)
+{
+	unlock_pll_control_mmr();
+	/* UART0 */
+	writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
+	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
+		;
+}
+
+void setup_early_clocks(void)
+{
+	setup_clocks_for_console();
+}
+
+/*
+ * Configure the PLL/PRCM for necessary peripherals
+ */
+void prcm_init(void)
+{
+	/* Enable the control module */
+	writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
+
+	/* Configure PLLs */
+	mpu_pll_config();
+	l3_pll_config();
+	sata_pll_config();
+
+	/* Enable the required peripherals */
+	enable_per_clocks();
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_ti816x.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_ti816x.c
new file mode 100644
index 000000000..ec4cc7538
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/clock_ti816x.c
@@ -0,0 +1,407 @@
+/*
+ * clock_ti816x.c
+ *
+ * Clocks for TI816X based boards
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * Based on TI-PSP-04.00.02.14 :
+ *
+ * Copyright (C) 2009, Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+
+#include <asm/emif.h>
+
+#define CM_PLL_BASE		(CTRL_BASE + 0x0400)
+
+/* Main PLL */
+#define MAIN_N			64
+#define MAIN_P			0x1
+#define MAIN_INTFREQ1		0x8
+#define MAIN_FRACFREQ1		0x800000
+#define MAIN_MDIV1		0x2
+#define MAIN_INTFREQ2		0xE
+#define MAIN_FRACFREQ2		0x0
+#define MAIN_MDIV2		0x1
+#define MAIN_INTFREQ3		0x8
+#define MAIN_FRACFREQ3		0xAAAAB0
+#define MAIN_MDIV3		0x3
+#define MAIN_INTFREQ4		0x9
+#define MAIN_FRACFREQ4		0x55554F
+#define MAIN_MDIV4		0x3
+#define MAIN_INTFREQ5		0x9
+#define MAIN_FRACFREQ5		0x374BC6
+#define MAIN_MDIV5		0xC
+#define MAIN_MDIV6		0x48
+#define MAIN_MDIV7		0x4
+
+/* DDR PLL */
+#define DDR_N			59
+#define DDR_P			0x1
+#define DDR_MDIV1		0x2
+#define DDR_INTFREQ2		0x8
+#define DDR_FRACFREQ2		0xD99999
+#define DDR_MDIV2		0x1E
+#define DDR_INTFREQ3		0x8
+#define DDR_FRACFREQ3		0x0
+#define DDR_MDIV3		0x4
+#define DDR_INTFREQ4		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4		0x0
+#define DDR_MDIV4		0x4
+#define DDR_INTFREQ5		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5		0x0
+#define DDR_MDIV5		0x4
+
+#define CONTROL_STATUS			(CTRL_BASE + 0x40)
+#define DDR_RCD				(CTRL_BASE + 0x070C)
+#define CM_TIMER1_CLKSEL		(PRCM_BASE + 0x390)
+#define CM_ALWON_CUST_EFUSE_CLKCTRL	(PRCM_BASE + 0x1628)
+
+#define INTCPS_SYSCONFIG	0x48200010
+#define CM_SYSCLK10_CLKSEL	0x48180324
+
+struct cm_pll {
+	unsigned int mainpll_ctrl;	/* offset 0x400 */
+	unsigned int mainpll_pwd;
+	unsigned int mainpll_freq1;
+	unsigned int mainpll_div1;
+	unsigned int mainpll_freq2;
+	unsigned int mainpll_div2;
+	unsigned int mainpll_freq3;
+	unsigned int mainpll_div3;
+	unsigned int mainpll_freq4;
+	unsigned int mainpll_div4;
+	unsigned int mainpll_freq5;
+	unsigned int mainpll_div5;
+	unsigned int resv0[1];
+	unsigned int mainpll_div6;
+	unsigned int resv1[1];
+	unsigned int mainpll_div7;
+	unsigned int ddrpll_ctrl;	/* offset 0x440 */
+	unsigned int ddrpll_pwd;
+	unsigned int resv2[1];
+	unsigned int ddrpll_div1;
+	unsigned int ddrpll_freq2;
+	unsigned int ddrpll_div2;
+	unsigned int ddrpll_freq3;
+	unsigned int ddrpll_div3;
+	unsigned int ddrpll_freq4;
+	unsigned int ddrpll_div4;
+	unsigned int ddrpll_freq5;
+	unsigned int ddrpll_div5;
+	unsigned int videopll_ctrl;	/* offset 0x470 */
+	unsigned int videopll_pwd;
+	unsigned int videopll_freq1;
+	unsigned int videopll_div1;
+	unsigned int videopll_freq2;
+	unsigned int videopll_div2;
+	unsigned int videopll_freq3;
+	unsigned int videopll_div3;
+	unsigned int resv3[4];
+	unsigned int audiopll_ctrl;	/* offset 0x4A0 */
+	unsigned int audiopll_pwd;
+	unsigned int resv4[2];
+	unsigned int audiopll_freq2;
+	unsigned int audiopll_div2;
+	unsigned int audiopll_freq3;
+	unsigned int audiopll_div3;
+	unsigned int audiopll_freq4;
+	unsigned int audiopll_div4;
+	unsigned int audiopll_freq5;
+	unsigned int audiopll_div5;
+};
+
+const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
+const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
+const struct cm_pll *cmpll = (struct cm_pll *)CM_PLL_BASE;
+const struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+
+void enable_dmm_clocks(void)
+{
+	writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
+	/* Wait for dmm to be fully functional, including OCP */
+	while (((readl(&cmdef->dmmclkctrl) >> 17) & 0x3) != 0)
+		;
+}
+
+void enable_emif_clocks(void)
+{
+	writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
+	writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
+	writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
+	writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
+
+	/* Wait for clocks to be active */
+	while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
+		;
+	/* Wait for emif0 to be fully functional, including OCP */
+	while (((readl(&cmdef->emif0clkctrl) >> 17) & 0x3) != 0)
+		;
+	/* Wait for emif1 to be fully functional, including OCP */
+	while (((readl(&cmdef->emif1clkctrl) >> 17) & 0x3) != 0)
+		;
+}
+
+/* assume delay is aprox at least 1us */
+static void ddr_delay(int d)
+{
+	int i;
+
+	/*
+	 * read a control register.
+	 * this is a bit more delay and cannot be optimized by the compiler
+	 * assuming one read takes 200 cycles and A8 is runing 1 GHz
+	 * somewhat conservative setting
+	 */
+	for (i = 0; i < 50*d; i++)
+		readl(CONTROL_STATUS);
+}
+
+static void main_pll_init_ti816x(void)
+{
+	u32 main_pll_ctrl = 0;
+
+	/* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */
+	main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+	main_pll_ctrl &= 0xFFFFFFFB;
+	main_pll_ctrl |= BIT(2);
+	writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+	/* Enable PLL by setting BIT3 in its ctrl reg */
+	main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+	main_pll_ctrl &= 0xFFFFFFF7;
+	main_pll_ctrl |= BIT(3);
+	writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+	/* Write the values of N,P in the CTRL reg  */
+	main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+	main_pll_ctrl &= 0xFF;
+	main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8);
+	writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+	/* Power up clock1-7 */
+	writel(0x0, &cmpll->mainpll_pwd);
+
+	/* Program the freq and divider values for clock1-7 */
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1),
+		&cmpll->mainpll_freq1);
+	writel(((1<<8) | MAIN_MDIV1), &cmpll->mainpll_div1);
+
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2),
+		&cmpll->mainpll_freq2);
+	writel(((1<<8) | MAIN_MDIV2), &cmpll->mainpll_div2);
+
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3),
+		&cmpll->mainpll_freq3);
+	writel(((1<<8) | MAIN_MDIV3), &cmpll->mainpll_div3);
+
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4),
+		&cmpll->mainpll_freq4);
+	writel(((1<<8) | MAIN_MDIV4), &cmpll->mainpll_div4);
+
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5),
+		&cmpll->mainpll_freq5);
+	writel(((1<<8) | MAIN_MDIV5), &cmpll->mainpll_div5);
+
+	writel((1<<8 | MAIN_MDIV6), &cmpll->mainpll_div6);
+
+	writel((1<<8 | MAIN_MDIV7), &cmpll->mainpll_div7);
+
+	/* Wait for PLL to lock */
+	while ((readl(&cmpll->mainpll_ctrl) & BIT(7)) != BIT(7))
+		;
+
+	/* Put the PLL in normal mode, disable bypass */
+	main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+	main_pll_ctrl &= 0xFFFFFFFB;
+	writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+}
+
+static void ddr_pll_bypass_ti816x(void)
+{
+	u32 ddr_pll_ctrl = 0;
+
+	/* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */
+	ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+	ddr_pll_ctrl &= 0xFFFFFFFB;
+	ddr_pll_ctrl |= BIT(2);
+	writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+}
+
+static void ddr_pll_init_ti816x(void)
+{
+	u32 ddr_pll_ctrl = 0;
+	/* Enable PLL by setting BIT3 in its ctrl reg */
+	ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+	ddr_pll_ctrl &= 0xFFFFFFF7;
+	ddr_pll_ctrl |= BIT(3);
+	writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+
+	/* Write the values of N,P in the CTRL reg  */
+	ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+	ddr_pll_ctrl &= 0xFF;
+	ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8);
+	writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+
+	ddr_delay(10);
+
+	/* Power up clock1-5 */
+	writel(0x0, &cmpll->ddrpll_pwd);
+
+	/* Program the freq and divider values for clock1-3 */
+	writel(((0<<8) | DDR_MDIV1), &cmpll->ddrpll_div1);
+	ddr_delay(1);
+	writel(((1<<8) | DDR_MDIV1), &cmpll->ddrpll_div1);
+	writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2),
+		&cmpll->ddrpll_freq2);
+	writel(((1<<8) | DDR_MDIV2), &cmpll->ddrpll_div2);
+	writel(((0<<8) | DDR_MDIV3), &cmpll->ddrpll_div3);
+	ddr_delay(1);
+	writel(((1<<8) | DDR_MDIV3), &cmpll->ddrpll_div3);
+	ddr_delay(1);
+	writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
+		&cmpll->ddrpll_freq3);
+	ddr_delay(1);
+	writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
+		&cmpll->ddrpll_freq3);
+
+	ddr_delay(5);
+
+	/* Wait for PLL to lock */
+	while ((readl(&cmpll->ddrpll_ctrl) & BIT(7)) != BIT(7))
+		;
+
+	/* Power up RCD */
+	writel(BIT(0), DDR_RCD);
+}
+
+static void peripheral_enable(void)
+{
+	/* Wake-up the l3_slow clock */
+	writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl);
+
+	/*
+	 * Note on Timers:
+	 * There are 8 timers(0-7) out of which timer 0 is a secure timer.
+	 * Timer 0 mux should not be changed
+	 *
+	 * To access the timer registers we need the to be
+	 * enabled which is what we do in the first step
+	 */
+
+	/* Enable timer1 */
+	writel(PRCM_MOD_EN, &cmalwon->timer1clkctrl);
+	/* Select timer1 clock to be CLKIN (27MHz) */
+	writel(BIT(1), CM_TIMER1_CLKSEL);
+
+	/* Wait for timer1 to be ON-ACTIVE */
+	while (((readl(&cmalwon->l3slowclkstctrl)
+					& (0x80000<<1))>>20) != 1)
+		;
+	/* Wait for timer1 to be enabled */
+	while (((readl(&cmalwon->timer1clkctrl) & 0x30000)>>16) != 0)
+		;
+	/* Active posted mode */
+	writel(PRCM_MOD_EN, (DM_TIMER1_BASE + 0x54));
+	while (readl(DM_TIMER1_BASE + 0x10) & BIT(0))
+		;
+	/* Start timer1  */
+	writel(BIT(0), (DM_TIMER1_BASE + 0x38));
+
+	/* eFuse */
+	writel(PRCM_MOD_EN, CM_ALWON_CUST_EFUSE_CLKCTRL);
+	while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != PRCM_MOD_EN)
+		;
+
+	/* Enable gpio0 */
+	writel(PRCM_MOD_EN, &cmalwon->gpio0clkctrl);
+	while (readl(&cmalwon->gpio0clkctrl) != PRCM_MOD_EN)
+		;
+	writel((BIT(1) | BIT(8)), &cmalwon->gpio0clkctrl);
+
+	/* Enable gpio1 */
+	writel(PRCM_MOD_EN, &cmalwon->gpio1clkctrl);
+	while (readl(&cmalwon->gpio1clkctrl) != PRCM_MOD_EN)
+		;
+	writel((BIT(1) | BIT(8)), &cmalwon->gpio1clkctrl);
+
+	/* Enable spi */
+	writel(PRCM_MOD_EN, &cmalwon->spiclkctrl);
+	while (readl(&cmalwon->spiclkctrl) != PRCM_MOD_EN)
+		;
+
+	/* Enable i2c0 */
+	writel(PRCM_MOD_EN, &cmalwon->i2c0clkctrl);
+	while (readl(&cmalwon->i2c0clkctrl) != PRCM_MOD_EN)
+		;
+
+	/* Enable ethernet0 */
+	writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl);
+	writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl);
+	writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl);
+
+	/* Enable hsmmc */
+	writel(PRCM_MOD_EN, &cmalwon->sdioclkctrl);
+	while (readl(&cmalwon->sdioclkctrl) != PRCM_MOD_EN)
+		;
+}
+
+void setup_clocks_for_console(void)
+{
+	/* Fix ROM code bug - from TI-PSP-04.00.02.14 */
+	writel(0x0, CM_SYSCLK10_CLKSEL);
+
+	ddr_pll_bypass_ti816x();
+
+	/* Enable uart0-2 */
+	writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
+	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
+		;
+	writel(PRCM_MOD_EN, &cmalwon->uart1clkctrl);
+	while (readl(&cmalwon->uart1clkctrl) != PRCM_MOD_EN)
+		;
+	writel(PRCM_MOD_EN, &cmalwon->uart2clkctrl);
+	while (readl(&cmalwon->uart2clkctrl) != PRCM_MOD_EN)
+		;
+	while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
+		;
+}
+
+void setup_early_clocks(void)
+{
+	setup_clocks_for_console();
+}
+
+void prcm_init(void)
+{
+	/* Enable the control */
+	writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
+
+	main_pll_init_ti816x();
+	ddr_pll_init_ti816x();
+
+	/*
+	 * With clk freqs setup to desired values,
+	 * enable the required peripherals
+	 */
+	peripheral_enable();
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/ddr.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/ddr.c
new file mode 100644
index 000000000..f8434ecf5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/ddr.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * DDR Configuration for AM33xx devices.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <linux/delay.h>
+
+/**
+ * Base address for EMIF instances
+ */
+static struct emif_reg_struct *emif_reg[2] = {
+				(struct emif_reg_struct *)EMIF4_0_CFG_BASE,
+				(struct emif_reg_struct *)EMIF4_1_CFG_BASE};
+
+/**
+ * Base addresses for DDR PHY cmd/data regs
+ */
+static struct ddr_cmd_regs *ddr_cmd_reg[2] = {
+				(struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR,
+				(struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR2};
+
+static struct ddr_data_regs *ddr_data_reg[2] = {
+				(struct ddr_data_regs *)DDR_PHY_DATA_ADDR,
+				(struct ddr_data_regs *)DDR_PHY_DATA_ADDR2};
+
+/**
+ * Base address for ddr io control instances
+ */
+static struct ddr_cmdtctrl *ioctrl_reg = {
+			(struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR};
+
+static inline u32 get_mr(int nr, u32 cs, u32 mr_addr)
+{
+	u32 mr;
+
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
+	writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg);
+
+	mr = readl(&emif_reg[nr]->emif_lpddr2_mode_reg_data);
+	debug("get_mr: EMIF1 cs %d mr %08x val 0x%x\n", cs, mr_addr, mr);
+	if (((mr & 0x0000ff00) >>  8) == (mr & 0xff) &&
+	    ((mr & 0x00ff0000) >> 16) == (mr & 0xff) &&
+	    ((mr & 0xff000000) >> 24) == (mr & 0xff))
+		return mr & 0xff;
+	else
+		return mr;
+}
+
+static inline void set_mr(int nr, u32 cs, u32 mr_addr, u32 mr_val)
+{
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
+	writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg);
+	writel(mr_val, &emif_reg[nr]->emif_lpddr2_mode_reg_data);
+}
+
+static void configure_mr(int nr, u32 cs)
+{
+	u32 mr_addr;
+
+	while (get_mr(nr, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
+		;
+	set_mr(nr, cs, LPDDR2_MR10, 0x56);
+
+	set_mr(nr, cs, LPDDR2_MR1, 0x43);
+	set_mr(nr, cs, LPDDR2_MR2, 0x2);
+
+	mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
+	set_mr(nr, cs, mr_addr, 0x2);
+}
+
+/*
+ * Configure EMIF4D5 registers and MR registers For details about these magic
+ * values please see the EMIF registers section of the TRM.
+ */
+void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
+{
+#ifdef CONFIG_AM43XX
+	struct prm_device_inst *prm_device =
+			(struct prm_device_inst *)PRM_DEVICE_INST;
+#endif
+
+	writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
+	writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
+	writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
+
+	writel(regs->temp_alert_config, &emif_reg[nr]->emif_temp_alert_config);
+	writel(regs->emif_rd_wr_lvl_rmp_win,
+	       &emif_reg[nr]->emif_rd_wr_lvl_rmp_win);
+	writel(regs->emif_rd_wr_lvl_rmp_ctl,
+	       &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl);
+	writel(regs->emif_rd_wr_lvl_ctl, &emif_reg[nr]->emif_rd_wr_lvl_ctl);
+	writel(regs->emif_rd_wr_exec_thresh,
+	       &emif_reg[nr]->emif_rd_wr_exec_thresh);
+
+	/*
+	 * for most SOCs these registers won't need to be changed so only
+	 * write to these registers if someone explicitly has set the
+	 * register's value.
+	 */
+	if(regs->emif_cos_config) {
+		writel(regs->emif_prio_class_serv_map, &emif_reg[nr]->emif_prio_class_serv_map);
+		writel(regs->emif_connect_id_serv_1_map, &emif_reg[nr]->emif_connect_id_serv_1_map);
+		writel(regs->emif_connect_id_serv_2_map, &emif_reg[nr]->emif_connect_id_serv_2_map);
+		writel(regs->emif_cos_config, &emif_reg[nr]->emif_cos_config);
+	}
+
+	/*
+	 * Sequence to ensure that the PHY is in a known state prior to
+	 * startting hardware leveling.  Also acts as to latch some state from
+	 * the EMIF into the PHY.
+	 */
+	writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
+	writel(0x2411, &emif_reg[nr]->emif_iodft_tlgc);
+	writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
+
+	clrbits_le32(&emif_reg[nr]->emif_sdram_ref_ctrl,
+			EMIF_REG_INITREF_DIS_MASK);
+
+	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
+	writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
+
+	/* Wait 1ms because of L3 timeout error */
+	udelay(1000);
+
+	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
+
+#ifdef CONFIG_AM43XX
+	/*
+	 * Disable EMIF_DEVOFF
+	 * -> Cold Boot: This is just rewriting the default register value.
+	 * -> RTC Resume: Must disable DEVOFF before leveling.
+	 */
+	writel(0, &prm_device->emif_ctrl);
+#endif
+
+	/* Perform hardware leveling for DDR3 */
+	if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) {
+		writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36) |
+		       0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36);
+		writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw) |
+		       0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw);
+
+		writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl);
+
+		/* Enable read leveling */
+		writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_ctl);
+
+		/* Wait 1ms because of L3 timeout error */
+		udelay(1000);
+
+		/*
+		 * Enable full read and write leveling.  Wait for read and write
+		 * leveling bit to clear RDWRLVLFULL_START bit 31
+		 */
+		while ((readl(&emif_reg[nr]->emif_rd_wr_lvl_ctl) & 0x80000000)
+		      != 0)
+			;
+
+		/* Check the timeout register to see if leveling is complete */
+		if ((readl(&emif_reg[nr]->emif_status) & 0x70) != 0)
+			puts("DDR3 H/W leveling incomplete with errors\n");
+
+	} else {
+		/* DDR2 */
+		configure_mr(nr, 0);
+		configure_mr(nr, 1);
+	}
+}
+
+/**
+ * Configure SDRAM
+ */
+void config_sdram(const struct emif_regs *regs, int nr)
+{
+#ifdef CONFIG_TI816X
+	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
+	writel(regs->emif_ddr_phy_ctlr_1, &emif_reg[nr]->emif_ddr_phy_ctrl_1);
+	writel(regs->emif_ddr_phy_ctlr_1, &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw);
+	writel(0x0000613B, &emif_reg[nr]->emif_sdram_ref_ctrl);   /* initially a large refresh period */
+	writel(0x1000613B, &emif_reg[nr]->emif_sdram_ref_ctrl);   /* trigger initialization           */
+	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+#else
+	if (regs->zq_config) {
+		writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
+		writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
+		writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
+
+		/* Trigger initialization */
+		writel(0x00003100, &emif_reg[nr]->emif_sdram_ref_ctrl);
+		/* Wait 1ms because of L3 timeout error */
+		udelay(1000);
+
+		/* Write proper sdram_ref_cref_ctrl value */
+		writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+		writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
+	}
+	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
+	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
+
+	/* Write REG_COS_COUNT_1, REG_COS_COUNT_2, and REG_PR_OLD_COUNT. */
+	if (regs->ocp_config)
+		writel(regs->ocp_config, &emif_reg[nr]->emif_l3_config);
+#endif
+}
+
+/**
+ * Set SDRAM timings
+ */
+void set_sdram_timings(const struct emif_regs *regs, int nr)
+{
+	writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1);
+	writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1_shdw);
+	writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2);
+	writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2_shdw);
+	writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3);
+	writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw);
+}
+
+/*
+ * Configure EXT PHY registers for software leveling
+ */
+static void ext_phy_settings_swlvl(const struct emif_regs *regs, int nr)
+{
+	u32 *ext_phy_ctrl_base = 0;
+	u32 *emif_ext_phy_ctrl_base = 0;
+	__maybe_unused const u32 *ext_phy_ctrl_const_regs;
+	u32 i = 0;
+	__maybe_unused u32 size;
+
+	ext_phy_ctrl_base = (u32 *)&(regs->emif_ddr_ext_phy_ctrl_1);
+	emif_ext_phy_ctrl_base =
+			(u32 *)&(emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+
+	/* Configure external phy control timing registers */
+	for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
+		writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
+		/* Update shadow registers */
+		writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
+	}
+
+#ifdef CONFIG_AM43XX
+	/*
+	 * External phy 6-24 registers do not change with ddr frequency.
+	 * These only need to be set on DDR2 on AM43xx.
+	 */
+	emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs, &size);
+
+	if (!size)
+		return;
+
+	for (i = 0; i < size; i++) {
+		writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
+		/* Update shadow registers */
+		writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
+	}
+#endif
+}
+
+/*
+ * Configure EXT PHY registers for hardware leveling
+ */
+static void ext_phy_settings_hwlvl(const struct emif_regs *regs, int nr)
+{
+	/*
+	 * Enable hardware leveling on the EMIF.  For details about these
+	 * magic values please see the EMIF registers section of the TRM.
+	 */
+	if (regs->emif_ddr_phy_ctlr_1 & 0x00040000) {
+		/* PHY_INVERT_CLKOUT = 1 */
+		writel(0x00040100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+		writel(0x00040100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+	} else {
+		/* PHY_INVERT_CLKOUT = 0 */
+		writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+		writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+	}
+
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22_shdw);
+	writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23);
+	writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23_shdw);
+	writel(0x40010080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_24);
+	writel(0x40010080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_24_shdw);
+	writel(0x08102040, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_25);
+	writel(0x08102040, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_25_shdw);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_26);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_26_shdw);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_27);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_27_shdw);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_28);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_28_shdw);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_29);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_29_shdw);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_30);
+	writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_30_shdw);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_31);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_31_shdw);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_32);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_32_shdw);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_33);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_33_shdw);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_34);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_34_shdw);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_35);
+	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_35_shdw);
+	writel(0x00000077, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36);
+	writel(0x00000077, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw);
+
+	/*
+	 * Sequence to ensure that the PHY is again in a known state after
+	 * hardware leveling.
+	 */
+	writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
+	writel(0x2411, &emif_reg[nr]->emif_iodft_tlgc);
+	writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
+}
+
+/**
+ * Configure DDR PHY
+ */
+void config_ddr_phy(const struct emif_regs *regs, int nr)
+{
+	/*
+	 * Disable initialization and refreshes for now until we finish
+	 * programming EMIF regs and set time between rising edge of
+	 * DDR_RESET to rising edge of DDR_CKE to > 500us per memory spec.
+	 * We currently hardcode a value based on a max expected frequency
+	 * of 400MHz.
+	 */
+	writel(EMIF_REG_INITREF_DIS_MASK | 0x3100,
+		&emif_reg[nr]->emif_sdram_ref_ctrl);
+
+	writel(regs->emif_ddr_phy_ctlr_1,
+		&emif_reg[nr]->emif_ddr_phy_ctrl_1);
+	writel(regs->emif_ddr_phy_ctlr_1,
+		&emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw);
+
+	if (get_emif_rev((u32)emif_reg[nr]) == EMIF_4D5) {
+		if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3)
+			ext_phy_settings_hwlvl(regs, nr);
+		else
+			ext_phy_settings_swlvl(regs, nr);
+	}
+}
+
+/**
+ * Configure DDR CMD control registers
+ */
+void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
+{
+	if (!cmd)
+		return;
+
+	writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
+	writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
+
+	writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio);
+	writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout);
+
+	writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio);
+	writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout);
+}
+
+/**
+ * Configure DDR DATA registers
+ */
+void config_ddr_data(const struct ddr_data *data, int nr)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	for (i = 0; i < DDR_DATA_REGS_NR; i++) {
+		writel(data->datardsratio0,
+			&(ddr_data_reg[nr]+i)->dt0rdsratio0);
+		writel(data->datawdsratio0,
+			&(ddr_data_reg[nr]+i)->dt0wdsratio0);
+		writel(data->datawiratio0,
+			&(ddr_data_reg[nr]+i)->dt0wiratio0);
+		writel(data->datagiratio0,
+			&(ddr_data_reg[nr]+i)->dt0giratio0);
+		writel(data->datafwsratio0,
+			&(ddr_data_reg[nr]+i)->dt0fwsratio0);
+		writel(data->datawrsratio0,
+			&(ddr_data_reg[nr]+i)->dt0wrsratio0);
+	}
+}
+
+void config_io_ctrl(const struct ctrl_ioregs *ioregs)
+{
+	if (!ioregs)
+		return;
+
+	writel(ioregs->cm0ioctl, &ioctrl_reg->cm0ioctl);
+	writel(ioregs->cm1ioctl, &ioctrl_reg->cm1ioctl);
+	writel(ioregs->cm2ioctl, &ioctrl_reg->cm2ioctl);
+	writel(ioregs->dt0ioctl, &ioctrl_reg->dt0ioctl);
+	writel(ioregs->dt1ioctl, &ioctrl_reg->dt1ioctl);
+#ifdef CONFIG_AM43XX
+	writel(ioregs->dt2ioctrl, &ioctrl_reg->dt2ioctrl);
+	writel(ioregs->dt3ioctrl, &ioctrl_reg->dt3ioctrl);
+	writel(ioregs->emif_sdram_config_ext,
+	       &ioctrl_reg->emif_sdram_config_ext);
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/emif4.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/emif4.c
new file mode 100644
index 000000000..a5fdb0433
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/emif4.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * emif4.c
+ *
+ * AM33XX emif4 configuration file
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+
+static struct vtp_reg *vtpreg[2] = {
+				(struct vtp_reg *)VTP0_CTRL_ADDR,
+				(struct vtp_reg *)VTP1_CTRL_ADDR};
+#ifdef CONFIG_AM33XX
+static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
+#endif
+#ifdef CONFIG_AM43XX
+static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
+static struct cm_device_inst *cm_device =
+				(struct cm_device_inst *)CM_DEVICE_INST;
+#endif
+
+#ifdef CONFIG_TI814X
+void config_dmm(const struct dmm_lisa_map_regs *regs)
+{
+	struct dmm_lisa_map_regs *hw_lisa_map_regs =
+				(struct dmm_lisa_map_regs *)DMM_BASE;
+
+	enable_dmm_clocks();
+
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
+
+	writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3);
+	writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2);
+	writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1);
+	writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0);
+}
+#endif
+
+static void config_vtp(int nr)
+{
+	writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE,
+			&vtpreg[nr]->vtp0ctrlreg);
+	writel(readl(&vtpreg[nr]->vtp0ctrlreg) & (~VTP_CTRL_START_EN),
+			&vtpreg[nr]->vtp0ctrlreg);
+	writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_START_EN,
+			&vtpreg[nr]->vtp0ctrlreg);
+
+	/* Poll for READY */
+	while ((readl(&vtpreg[nr]->vtp0ctrlreg) & VTP_CTRL_READY) !=
+			VTP_CTRL_READY)
+		;
+}
+
+void __weak ddr_pll_config(unsigned int ddrpll_m)
+{
+}
+
+void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
+		const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs, int nr)
+{
+	ddr_pll_config(pll);
+	config_vtp(nr);
+	config_cmd_ctrl(ctrl, nr);
+
+	config_ddr_data(data, nr);
+#ifdef CONFIG_AM33XX
+	config_io_ctrl(ioregs);
+
+	/* Set CKE to be controlled by EMIF/DDR PHY */
+	writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
+
+#endif
+#ifdef CONFIG_AM43XX
+	writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl);
+	while ((readl(&cm_device->cm_dll_ctrl) & CM_DLL_READYST) == 0)
+		;
+
+	config_io_ctrl(ioregs);
+
+	/* Set CKE to be controlled by EMIF/DDR PHY */
+	writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
+
+	if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3)
+#ifndef CONFIG_SPL_RTC_DDR_SUPPORT
+		/* Allow EMIF to control DDR_RESET */
+		writel(0x00000000, &ddrctrl->ddrioctrl);
+#else
+		/* Override EMIF DDR_RESET control */
+		writel(0x80000000, &ddrctrl->ddrioctrl);
+#endif /* CONFIG_SPL_RTC_DDR_SUPPORT */
+#endif
+
+	/* Program EMIF instance */
+	config_ddr_phy(regs, nr);
+	set_sdram_timings(regs, nr);
+	if (get_emif_rev(EMIF1_BASE) == EMIF_4D5)
+		config_sdram_emif4d5(regs, nr);
+	else
+		config_sdram(regs, nr);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/fdt.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/fdt.c
new file mode 100644
index 000000000..2ec30b1f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/fdt.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017 Texas Instruments, Inc.
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#include <malloc.h>
+
+#include <asm/omap_common.h>
+#include <asm/arch-am33xx/sys_proto.h>
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+
+static void ft_hs_fixups(void *fdt, struct bd_info *bd)
+{
+	/* Check we are running on an HS/EMU device type */
+	if (GP_DEVICE != get_device_type()) {
+		if ((ft_hs_disable_rng(fdt, bd) == 0) &&
+		    (ft_hs_fixup_dram(fdt, bd) == 0) &&
+		    (ft_hs_add_tee(fdt, bd) == 0))
+			return;
+	} else {
+		printf("ERROR: Incorrect device type (GP) detected!");
+	}
+	/* Fixup failed or wrong device type */
+	hang();
+}
+#else
+static void ft_hs_fixups(void *fdt, struct bd_info *bd) { }
+#endif /* #ifdef CONFIG_TI_SECURE_DEVICE */
+
+/*
+ * Place for general cpu/SoC FDT fixups. Board specific
+ * fixups should remain in the board files which is where
+ * this function should be called from.
+ */
+void ft_cpu_setup(void *fdt, struct bd_info *bd)
+{
+	ft_hs_fixups(fdt, bd);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/hw_data.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/hw_data.c
new file mode 100644
index 000000000..e9e5415be
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/hw_data.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * HW data initialization for AM33xx.
+ *
+ * (C) Copyright 2017 Linaro Ltd.
+ * Sam Protsenko <semen.protsenko@linaro.org>
+ */
+
+#include <asm/arch/omap.h>
+#include <asm/omap_common.h>
+
+struct omap_sys_ctrl_regs const **ctrl =
+	(struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
+
+void hw_data_init(void)
+{
+	*ctrl = &am33xx_ctrl;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/mux.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/mux.c
new file mode 100644
index 000000000..aad3ec855
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/mux.c
@@ -0,0 +1,47 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+/*
+ * Configure the pin mux for the module
+ */
+void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux)
+{
+	int i;
+
+	if (!mod_pin_mux)
+		return;
+
+	for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
+		MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
+}
+
+/*
+ * provide a default over-writable definition
+*/
+void __weak set_uart_mux_conf(void)
+{
+}
+
+/*
+* provide a default over-writable definition
+*/
+void __weak set_mux_conf_regs(void)
+{
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/prcm-regs.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/prcm-regs.c
new file mode 100644
index 000000000..d4c661e5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/prcm-regs.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * HW regs data for AM33xx.
+ *
+ * (C) Copyright 2017 Linaro Ltd.
+ * Sam Protsenko <semen.protsenko@linaro.org>
+ */
+
+#include <asm/arch/hardware.h>
+#include <asm/omap_common.h>
+
+struct omap_sys_ctrl_regs const am33xx_ctrl = {
+	.control_status = CTRL_BASE + 0x40,
+};
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/sys_info.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/sys_info.c
new file mode 100644
index 000000000..338f6afca
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/sys_info.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sys_info.c
+ *
+ * System information functions
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *      Richard Woodruff <r-woodruff2@ti.com>
+ *      Syed Mohammed Khasim <khasim@ti.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <power/tps65910.h>
+#include <linux/compiler.h>
+
+struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE;
+
+/**
+ * get_cpu_rev(void) - extract rev info
+ */
+u32 get_cpu_rev(void)
+{
+	u32 id;
+	u32 rev;
+
+	id = readl(DEVICE_ID);
+	rev = (id >> 28) & 0xff;
+
+	return rev;
+}
+
+/**
+ * get_cpu_type(void) - extract cpu info
+ */
+u32 get_cpu_type(void)
+{
+	u32 id = 0;
+	u32 partnum;
+
+	id = readl(DEVICE_ID);
+	partnum = (id >> 12) & 0xffff;
+
+	return partnum;
+}
+
+/**
+ * get_sysboot_value(void) - return SYS_BOOT[4:0]
+ */
+u32 get_sysboot_value(void)
+{
+	return readl(&cstat->statusreg) & SYSBOOT_MASK;
+}
+
+u32 get_sys_clk_index(void)
+{
+	struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
+	u32 ind = readl(&ctrl->statusreg);
+
+#ifdef CONFIG_AM43XX
+	u32 src;
+	src = (ind & CTRL_CRYSTAL_FREQ_SRC_MASK) >> CTRL_CRYSTAL_FREQ_SRC_SHIFT;
+	if (src == CTRL_CRYSTAL_FREQ_SRC_EFUSE) /* Value read from EFUSE */
+		return ((ind & CTRL_CRYSTAL_FREQ_SELECTION_MASK) >>
+			CTRL_CRYSTAL_FREQ_SELECTION_SHIFT);
+	else /* Value read from SYS BOOT pins */
+#endif
+		return ((ind & CTRL_SYSBOOT_15_14_MASK) >>
+			CTRL_SYSBOOT_15_14_SHIFT);
+}
+
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+static char *cpu_revs[] = {
+		"1.0",
+		"2.0",
+		"2.1"};
+
+static char *cpu_revs_am43xx[] = {
+		"1.0",
+		"1.1",
+		"1.2"};
+
+static char *dev_types[] = {
+		"TST",
+		"EMU",
+		"HS",
+		"GP"};
+
+/**
+ * Print CPU information
+ */
+int print_cpuinfo(void)
+{
+	char *cpu_s, *sec_s, *rev_s;
+	char **cpu_rev_arr = cpu_revs;
+
+	switch (get_cpu_type()) {
+	case AM335X:
+		cpu_s = "AM335X";
+		break;
+	case TI81XX:
+		cpu_s = "TI81XX";
+		break;
+	case AM437X:
+		cpu_s = "AM437X";
+		cpu_rev_arr = cpu_revs_am43xx;
+		break;
+	default:
+		cpu_s = "Unknown CPU type";
+		break;
+	}
+
+	if (get_cpu_rev() < ARRAY_SIZE(cpu_revs))
+		rev_s = cpu_rev_arr[get_cpu_rev()];
+	else
+		rev_s = "?";
+
+	if (get_device_type() < ARRAY_SIZE(dev_types))
+		sec_s = dev_types[get_device_type()];
+	else
+		sec_s = "?";
+
+	printf("CPU  : %s-%s rev %s\n", cpu_s, sec_s, rev_s);
+
+	return 0;
+}
+#endif	/* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_AM33XX
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev)
+{
+	int sil_rev;
+
+	sil_rev = readl(&cdev->deviceid) >> 28;
+
+	if (sil_rev == 0) {
+		/* No efuse in PG 1.0. Use max speed */
+		return MPUPLL_M_720;
+	} else if (sil_rev >= 1) {
+		/* Check what the efuse says our max speed is. */
+		int efuse_arm_mpu_max_freq, package_type;
+		efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma);
+		package_type = (efuse_arm_mpu_max_freq & PACKAGE_TYPE_MASK) >>
+				PACKAGE_TYPE_SHIFT;
+
+		/* PG 2.0, efuse may not be set. */
+		if (package_type == PACKAGE_TYPE_UNDEFINED || package_type ==
+		    PACKAGE_TYPE_RESERVED)
+			return MPUPLL_M_800;
+
+		switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) {
+		case AM335X_ZCZ_1000:
+			return MPUPLL_M_1000;
+		case AM335X_ZCZ_800:
+			return MPUPLL_M_800;
+		case AM335X_ZCZ_720:
+			return MPUPLL_M_720;
+		case AM335X_ZCZ_600:
+		case AM335X_ZCE_600:
+			return MPUPLL_M_600;
+		case AM335X_ZCZ_300:
+		case AM335X_ZCE_300:
+			return MPUPLL_M_300;
+		}
+	}
+
+	/* unknown, use the PG1.0 max */
+	return MPUPLL_M_720;
+}
+
+int am335x_get_mpu_vdd(int sil_rev, int frequency)
+{
+	int sel_mask = am335x_get_tps65910_mpu_vdd(sil_rev, frequency);
+
+	switch (sel_mask) {
+	case TPS65910_OP_REG_SEL_1_3_2_5:
+		return 1325000;
+	case TPS65910_OP_REG_SEL_1_2_0:
+		return 1200000;
+	case TPS65910_OP_REG_SEL_1_1_0:
+		return 1100000;
+	default:
+		return 1262500;
+	}
+}
+
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency)
+{
+	/* For PG2.0 and later, we have one set of values. */
+	if (sil_rev >= 1) {
+		switch (frequency) {
+		case MPUPLL_M_1000:
+			return TPS65910_OP_REG_SEL_1_3_2_5;
+		case MPUPLL_M_800:
+			return TPS65910_OP_REG_SEL_1_2_6;
+		case MPUPLL_M_720:
+			return TPS65910_OP_REG_SEL_1_2_0;
+		case MPUPLL_M_600:
+		case MPUPLL_M_500:
+		case MPUPLL_M_300:
+			return TPS65910_OP_REG_SEL_1_1_0;
+		}
+	}
+
+	/* Default to PG1.0 values. */
+	return TPS65910_OP_REG_SEL_1_2_6;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/am33xx/ti816x_emif4.c b/roms/u-boot/arch/arm/mach-omap2/am33xx/ti816x_emif4.c
new file mode 100644
index 000000000..707ea807a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/am33xx/ti816x_emif4.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ti816x_emif4.c
+ *
+ * TI816x emif4 configuration file
+ *
+ * Copyright (C) 2017, Konsulko Group
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <linux/delay.h>
+
+/*********************************************************************
+ * Init DDR3 on TI816X EVM
+ *********************************************************************/
+static void ddr_init_settings(const struct cmd_control *ctrl, int emif)
+{
+	/*
+	 * setup use_rank_delays to 1.  This is only necessary when
+	 * multiple ranks are in use.  Though the EVM does not have
+	 * multiple ranks, this is a good value to set.
+	 */
+	writel(1, DDRPHY_CONFIG_BASE + 0x134); // DATA0_REG_PHY_USE_RANK0_DELAYS
+	writel(1, DDRPHY_CONFIG_BASE + 0x1d8); // DATA1_REG_PHY_USE_RANK0_DELAYS
+	writel(1, DDRPHY_CONFIG_BASE + 0x27c); // DATA2_REG_PHY_USE_RANK0_DELAYS
+	writel(1, DDRPHY_CONFIG_BASE + 0x320); // DATA3_REG_PHY_USE_RANK0_DELAYS
+
+	config_cmd_ctrl(ctrl, emif);
+
+	/* for ddr3 this needs to be set to 1 */
+	writel(0x1, DDRPHY_CONFIG_BASE + 0x0F8); /* init mode */
+	writel(0x1, DDRPHY_CONFIG_BASE + 0x104);
+	writel(0x1, DDRPHY_CONFIG_BASE + 0x19C);
+	writel(0x1, DDRPHY_CONFIG_BASE + 0x1A8);
+	writel(0x1, DDRPHY_CONFIG_BASE + 0x240);
+	writel(0x1, DDRPHY_CONFIG_BASE + 0x24C);
+	writel(0x1, DDRPHY_CONFIG_BASE + 0x2E4);
+	writel(0x1, DDRPHY_CONFIG_BASE + 0x2F0);
+
+	/*
+	 * This represents the initial value for the leveling process.  The
+	 * value is a ratio - so 0x100 represents one cycle.  The real delay
+	 * is determined through the leveling process.
+	 *
+	 * During the leveling process, 0x20 is subtracted from the value, so
+	 * we have added that to the value we want to set.  We also set the
+	 * values such that byte3 completes leveling after byte2 and byte1
+	 * after byte0.
+	 */
+	writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x0F0); /*  data0 writelvl init ratio */
+	writel(0x0, DDRPHY_CONFIG_BASE + 0x0F4);   /*   */
+	writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x194); /*  data1 writelvl init ratio */
+	writel(0x0, DDRPHY_CONFIG_BASE + 0x198);   /*   */
+	writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x238); /*  data2 writelvl init ratio */
+	writel(0x0, DDRPHY_CONFIG_BASE + 0x23c);   /*   */
+	writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x2dc); /*  data3 writelvl init ratio */
+	writel(0x0, DDRPHY_CONFIG_BASE + 0x2e0);   /*   */
+
+
+	writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x0FC); /*  data0 gatelvl init ratio */
+	writel(0x0, DDRPHY_CONFIG_BASE + 0x100);
+	writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x1A0); /*  data1 gatelvl init ratio */
+	writel(0x0, DDRPHY_CONFIG_BASE + 0x1A4);
+	writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x244); /*  data2 gatelvl init ratio */
+	writel(0x0, DDRPHY_CONFIG_BASE + 0x248);
+	writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x2E8); /*  data3 gatelvl init ratio */
+	writel(0x0, DDRPHY_CONFIG_BASE + 0x2EC);
+
+	writel(0x5, DDRPHY_CONFIG_BASE + 0x00C);     /* cmd0 io config - output impedance of pad */
+	writel(0x5, DDRPHY_CONFIG_BASE + 0x010);     /* cmd0 io clk config - output impedance of pad */
+	writel(0x5, DDRPHY_CONFIG_BASE + 0x040);     /* cmd1 io config - output impedance of pad */
+	writel(0x5, DDRPHY_CONFIG_BASE + 0x044);     /* cmd1 io clk config - output impedance of pad */
+	writel(0x5, DDRPHY_CONFIG_BASE + 0x074);     /* cmd2 io config - output impedance of pad */
+	writel(0x5, DDRPHY_CONFIG_BASE + 0x078);     /* cmd2 io clk config - output impedance of pad */
+	writel(0x4, DDRPHY_CONFIG_BASE + 0x0A8);     /* data0 io config - output impedance of pad */
+	writel(0x4, DDRPHY_CONFIG_BASE + 0x0AC);     /* data0 io clk config - output impedance of pad */
+	writel(0x4, DDRPHY_CONFIG_BASE + 0x14C);     /* data1 io config - output impedance of pa     */
+	writel(0x4, DDRPHY_CONFIG_BASE + 0x150);     /* data1 io clk config - output impedance of pad */
+	writel(0x4, DDRPHY_CONFIG_BASE + 0x1F0);     /* data2 io config - output impedance of pa */
+	writel(0x4, DDRPHY_CONFIG_BASE + 0x1F4);     /* data2 io clk config - output impedance of pad */
+	writel(0x4, DDRPHY_CONFIG_BASE + 0x294);     /* data3 io config - output impedance of pa */
+	writel(0x4, DDRPHY_CONFIG_BASE + 0x298);     /* data3 io clk config - output impedance of pad */
+}
+
+static void ddr3_sw_levelling(const struct ddr_data *data, int emif)
+{
+	/* Set the correct value to DDR_VTP_CTRL_0 */
+	writel(0x6, (DDRPHY_CONFIG_BASE + 0x358));
+
+	writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x108));
+	writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x1AC));
+	writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x250));
+	writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x2F4));
+
+	writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x0DC));
+	writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x180));
+	writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x224));
+	writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x2C8));
+
+	writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x120));
+	writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x1C4));
+	writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x268));
+	writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x30C));
+
+	writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x0C8));
+	writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x16C));
+	writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x210));
+	writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x2B4));
+}
+
+static struct dmm_lisa_map_regs *hw_lisa_map_regs =
+				(struct dmm_lisa_map_regs *)DMM_BASE;
+
+#define DMM_PAT_BASE_ADDR		(DMM_BASE + 0x420)
+void config_dmm(const struct dmm_lisa_map_regs *regs)
+{
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
+
+	writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3);
+	writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2);
+	writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1);
+	writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0);
+
+	/* Enable Tiled Access */
+	writel(0x80000000, DMM_PAT_BASE_ADDR);
+}
+
+void config_ddr(const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs,
+		const struct dmm_lisa_map_regs *lisa_regs, int nrs)
+{
+	int i;
+
+	enable_emif_clocks();
+
+	for (i = 0; i < nrs; i++)
+		ddr_init_settings(ctrl, i);
+
+	enable_dmm_clocks();
+
+	/* Program the DMM to for non-interleaved configuration */
+	config_dmm(lisa_regs);
+
+	/* Program EMIF CFG Registers */
+	for (i = 0; i < nrs; i++) {
+		set_sdram_timings(regs, i);
+		config_sdram(regs, i);
+	}
+
+	udelay(1000);
+	for (i = 0; i < nrs; i++)
+		ddr3_sw_levelling(data, i);
+
+	udelay(50000);	/* Some delay needed */
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/boot-common.c b/roms/u-boot/arch/arm/mach-omap2/boot-common.c
new file mode 100644
index 000000000..1268a3250
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/boot-common.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * boot-common.c
+ *
+ * Common bootmode functions for omap based boards
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include <asm/omap_common.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <watchdog.h>
+#include <scsi.h>
+#include <i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak u32 omap_sys_boot_device(void)
+{
+	return BOOT_DEVICE_NONE;
+}
+
+void save_omap_boot_params(void)
+{
+	u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
+	struct omap_boot_parameters *omap_boot_params;
+	int sys_boot_device = 0;
+	u32 boot_device;
+	u32 boot_mode;
+
+	if ((boot_params < NON_SECURE_SRAM_START) ||
+	    (boot_params > NON_SECURE_SRAM_END))
+		return;
+
+	omap_boot_params = (struct omap_boot_parameters *)boot_params;
+
+	boot_device = omap_boot_params->boot_device;
+	boot_mode = MMCSD_MODE_UNDEFINED;
+
+	/* Boot device */
+
+#ifdef BOOT_DEVICE_NAND_I2C
+	/*
+	 * Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
+	 * Otherwise the SPL boot IF can't handle this device correctly.
+	 * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
+	 * Draco leads to this boot-device passed to SPL from the BootROM.
+	 */
+	if (boot_device == BOOT_DEVICE_NAND_I2C)
+		boot_device = BOOT_DEVICE_NAND;
+#endif
+#ifdef BOOT_DEVICE_QSPI_4
+	/*
+	 * We get different values for QSPI_1 and QSPI_4 being used, but
+	 * don't actually care about this difference.  Rather than
+	 * mangle the later code, if we're coming in as QSPI_4 just
+	 * change to the QSPI_1 value.
+	 */
+	if (boot_device == BOOT_DEVICE_QSPI_4)
+		boot_device = BOOT_DEVICE_SPI;
+#endif
+#ifdef CONFIG_TI816X
+	/*
+	 * On PG2.0 and later TI816x the values we get when booting are not the
+	 * same as on PG1.0, which is what the defines are based on.  Update
+	 * them as needed.
+	 */
+	if (get_cpu_rev() != 1) {
+		if (boot_device == 0x05) {
+			omap_boot_params->boot_device = BOOT_DEVICE_NAND;
+			boot_device = BOOT_DEVICE_NAND;
+		}
+		if (boot_device == 0x08) {
+			omap_boot_params->boot_device = BOOT_DEVICE_MMC1;
+			boot_device = BOOT_DEVICE_MMC1;
+		}
+	}
+#endif
+	/*
+	 * When booting from peripheral booting, the boot device is not usable
+	 * as-is (unless there is support for it), so the boot device is instead
+	 * figured out using the SYS_BOOT pins.
+	 */
+	switch (boot_device) {
+#if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT)
+		case BOOT_DEVICE_UART:
+			sys_boot_device = 1;
+			break;
+#endif
+#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
+		case BOOT_DEVICE_USB:
+			sys_boot_device = 1;
+			break;
+#endif
+#if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USB_ETHER)
+		case BOOT_DEVICE_USBETH:
+			sys_boot_device = 1;
+			break;
+#endif
+#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT)
+		case BOOT_DEVICE_CPGMAC:
+			sys_boot_device = 1;
+			break;
+#endif
+#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU)
+		case BOOT_DEVICE_DFU:
+			sys_boot_device = 1;
+			break;
+#endif
+	}
+
+	if (sys_boot_device) {
+		boot_device = omap_sys_boot_device();
+
+		/* MMC raw mode will fallback to FS mode. */
+		if ((boot_device >= MMC_BOOT_DEVICES_START) &&
+		    (boot_device <= MMC_BOOT_DEVICES_END))
+			boot_mode = MMCSD_MODE_RAW;
+	}
+
+	gd->arch.omap_boot_device = boot_device;
+
+	/* Boot mode */
+
+#ifdef CONFIG_OMAP34XX
+	if ((boot_device >= MMC_BOOT_DEVICES_START) &&
+	    (boot_device <= MMC_BOOT_DEVICES_END)) {
+		switch (boot_device) {
+		case BOOT_DEVICE_MMC1:
+			boot_mode = MMCSD_MODE_FS;
+			break;
+		case BOOT_DEVICE_MMC2:
+			boot_mode = MMCSD_MODE_RAW;
+			break;
+		}
+	}
+#else
+	/*
+	 * If the boot device was dynamically changed and doesn't match what
+	 * the bootrom initially booted, we cannot use the boot device
+	 * descriptor to figure out the boot mode.
+	 */
+	if ((boot_device == omap_boot_params->boot_device) &&
+	    (boot_device >= MMC_BOOT_DEVICES_START) &&
+	    (boot_device <= MMC_BOOT_DEVICES_END)) {
+		boot_params = omap_boot_params->boot_device_descriptor;
+		if ((boot_params < NON_SECURE_SRAM_START) ||
+		    (boot_params > NON_SECURE_SRAM_END))
+			return;
+
+		boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET));
+		if ((boot_params < NON_SECURE_SRAM_START) ||
+		    (boot_params > NON_SECURE_SRAM_END))
+			return;
+
+		boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET));
+
+		if (boot_mode != MMCSD_MODE_FS &&
+		    boot_mode != MMCSD_MODE_RAW)
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+			boot_mode = MMCSD_MODE_EMMCBOOT;
+#else
+			boot_mode = MMCSD_MODE_UNDEFINED;
+#endif
+	}
+#endif
+
+	gd->arch.omap_boot_mode = boot_mode;
+
+#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \
+    !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
+
+	/* CH flags */
+
+	gd->arch.omap_ch_flags = omap_boot_params->ch_flags;
+#endif
+}
+
+#ifdef CONFIG_SPL_BUILD
+u32 spl_boot_device(void)
+{
+	return gd->arch.omap_boot_device;
+}
+
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+	return gd->arch.omap_boot_mode;
+}
+
+void spl_board_init(void)
+{
+	/* Prepare console output */
+	preloader_console_init();
+
+#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
+	gpmc_init();
+#endif
+#if defined(CONFIG_SPL_I2C_SUPPORT) && !CONFIG_IS_ENABLED(DM_I2C)
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+#endif
+#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
+	arch_misc_init();
+#endif
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+	hw_watchdog_init();
+#endif
+#ifdef CONFIG_AM33XX
+	am33xx_spl_board_init();
+#endif
+}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+	typedef void __noreturn (*image_entry_noargs_t)(u32 *);
+	image_entry_noargs_t image_entry =
+			(image_entry_noargs_t) spl_image->entry_point;
+
+	u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
+
+	debug("image entry point: 0x%lX\n", spl_image->entry_point);
+	/* Pass the saved boot_params from rom code */
+	image_entry((u32 *)boot_params);
+}
+#endif
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+void arch_preboot_os(void)
+{
+	ahci_reset((void __iomem *)DWC_AHSATA_BASE);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/clocks-common.c b/roms/u-boot/arch/arm/mach-omap2/clocks-common.c
new file mode 100644
index 000000000..14b638a65
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/clocks-common.c
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Clock initialization for OMAP4
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * Based on previous work by:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	Rajendra Nayak <rnayak@ti.com>
+ */
+#include <common.h>
+#include <hang.h>
+#include <i2c.h>
+#include <init.h>
+#include <log.h>
+#include <asm/omap_common.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+#include <asm/omap_gpio.h>
+#include <asm/emif.h>
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * printing to console doesn't work unless
+ * this code is executed from SPL
+ */
+#define printf(fmt, args...)
+#define puts(s)
+#endif
+
+const u32 sys_clk_array[8] = {
+	12000000,	       /* 12 MHz */
+	20000000,		/* 20 MHz */
+	16800000,	       /* 16.8 MHz */
+	19200000,	       /* 19.2 MHz */
+	26000000,	       /* 26 MHz */
+	27000000,	       /* 27 MHz */
+	38400000,	       /* 38.4 MHz */
+};
+
+static inline u32 __get_sys_clk_index(void)
+{
+	s8 ind;
+	/*
+	 * For ES1 the ROM code calibration of sys clock is not reliable
+	 * due to hw issue. So, use hard-coded value. If this value is not
+	 * correct for any board over-ride this function in board file
+	 * From ES2.0 onwards you will get this information from
+	 * CM_SYS_CLKSEL
+	 */
+	if (omap_revision() == OMAP4430_ES1_0)
+		ind = OMAP_SYS_CLK_IND_38_4_MHZ;
+	else {
+		/* SYS_CLKSEL - 1 to match the dpll param array indices */
+		ind = (readl((*prcm)->cm_sys_clksel) &
+			CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
+	}
+	return ind;
+}
+
+u32 get_sys_clk_index(void)
+	__attribute__ ((weak, alias("__get_sys_clk_index")));
+
+u32 get_sys_clk_freq(void)
+{
+	u8 index = get_sys_clk_index();
+	return sys_clk_array[index];
+}
+
+void setup_post_dividers(u32 const base, const struct dpll_params *params)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	/* Setup post-dividers */
+	if (params->m2 >= 0)
+		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+	if (params->m3 >= 0)
+		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+	if (params->m4_h11 >= 0)
+		writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll);
+	if (params->m5_h12 >= 0)
+		writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll);
+	if (params->m6_h13 >= 0)
+		writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll);
+	if (params->m7_h14 >= 0)
+		writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll);
+	if (params->h21 >= 0)
+		writel(params->h21, &dpll_regs->cm_div_h21_dpll);
+	if (params->h22 >= 0)
+		writel(params->h22, &dpll_regs->cm_div_h22_dpll);
+	if (params->h23 >= 0)
+		writel(params->h23, &dpll_regs->cm_div_h23_dpll);
+	if (params->h24 >= 0)
+		writel(params->h24, &dpll_regs->cm_div_h24_dpll);
+}
+
+static inline void do_bypass_dpll(u32 const base)
+{
+	struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+	clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
+			CM_CLKMODE_DPLL_DPLL_EN_MASK,
+			DPLL_EN_FAST_RELOCK_BYPASS <<
+			CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_bypass(u32 const base)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll,
+				LDELAY)) {
+		printf("Bypassing DPLL failed %x\n", base);
+	}
+}
+
+static inline void do_lock_dpll(u32 const base)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
+		      CM_CLKMODE_DPLL_DPLL_EN_MASK,
+		      DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_lock(u32 const base)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
+		&dpll_regs->cm_idlest_dpll, LDELAY)) {
+		printf("DPLL locking failed for %x\n", base);
+		hang();
+	}
+}
+
+inline u32 check_for_lock(u32 const base)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+	u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK;
+
+	return lock;
+}
+
+const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->mpu[sysclk_ind];
+}
+
+const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->core[sysclk_ind];
+}
+
+const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->per[sysclk_ind];
+}
+
+const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->iva[sysclk_ind];
+}
+
+const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->usb[sysclk_ind];
+}
+
+const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data)
+{
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->abe[sysclk_ind];
+#else
+	return dpll_data->abe;
+#endif
+}
+
+static const struct dpll_params *get_ddr_dpll_params
+			(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+
+	if (!dpll_data->ddr)
+		return NULL;
+	return &dpll_data->ddr[sysclk_ind];
+}
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static const struct dpll_params *get_gmac_dpll_params
+			(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+
+	if (!dpll_data->gmac)
+		return NULL;
+	return &dpll_data->gmac[sysclk_ind];
+}
+#endif
+
+static void do_setup_dpll(u32 const base, const struct dpll_params *params,
+				u8 lock, char *dpll)
+{
+	u32 temp, M, N;
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	if (!params)
+		return;
+
+	temp = readl(&dpll_regs->cm_clksel_dpll);
+
+	if (check_for_lock(base)) {
+		/*
+		 * The Dpll has already been locked by rom code using CH.
+		 * Check if M,N are matching with Ideal nominal opp values.
+		 * If matches, skip the rest otherwise relock.
+		 */
+		M = (temp & CM_CLKSEL_DPLL_M_MASK) >> CM_CLKSEL_DPLL_M_SHIFT;
+		N = (temp & CM_CLKSEL_DPLL_N_MASK) >> CM_CLKSEL_DPLL_N_SHIFT;
+		if ((M != (params->m)) || (N != (params->n))) {
+			debug("\n %s Dpll locked, but not for ideal M = %d,"
+				"N = %d values, current values are M = %d,"
+				"N= %d" , dpll, params->m, params->n,
+				M, N);
+		} else {
+			/* Dpll locked with ideal values for nominal opps. */
+			debug("\n %s Dpll already locked with ideal"
+						"nominal opp values", dpll);
+
+			bypass_dpll(base);
+			goto setup_post_dividers;
+		}
+	}
+
+	bypass_dpll(base);
+
+	/* Set M & N */
+	temp &= ~CM_CLKSEL_DPLL_M_MASK;
+	temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK;
+
+	temp &= ~CM_CLKSEL_DPLL_N_MASK;
+	temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK;
+
+	writel(temp, &dpll_regs->cm_clksel_dpll);
+
+setup_post_dividers:
+	setup_post_dividers(base, params);
+
+	/* Lock */
+	if (lock)
+		do_lock_dpll(base);
+
+	/* Wait till the DPLL locks */
+	if (lock)
+		wait_for_lock(base);
+}
+
+u32 omap_ddr_clk(void)
+{
+	u32 ddr_clk, sys_clk_khz, omap_rev, divider;
+	const struct dpll_params *core_dpll_params;
+
+	omap_rev = omap_revision();
+	sys_clk_khz = get_sys_clk_freq() / 1000;
+
+	core_dpll_params = get_core_dpll_params(*dplls_data);
+
+	debug("sys_clk %d\n ", sys_clk_khz * 1000);
+
+	/* Find Core DPLL locked frequency first */
+	ddr_clk = sys_clk_khz * 2 * core_dpll_params->m /
+			(core_dpll_params->n + 1);
+
+	if (omap_rev < OMAP5430_ES1_0) {
+		/*
+		 * DDR frequency is PHY_ROOT_CLK/2
+		 * PHY_ROOT_CLK = Fdpll/2/M2
+		 */
+		divider = 4;
+	} else {
+		/*
+		 * DDR frequency is PHY_ROOT_CLK
+		 * PHY_ROOT_CLK = Fdpll/2/M2
+		 */
+		divider = 2;
+	}
+
+	ddr_clk = ddr_clk / divider / core_dpll_params->m2;
+	ddr_clk *= 1000;	/* convert to Hz */
+	debug("ddr_clk %d\n ", ddr_clk);
+
+	return ddr_clk;
+}
+
+/*
+ * Lock MPU dpll
+ *
+ * Resulting MPU frequencies:
+ * 4430 ES1.0	: 600 MHz
+ * 4430 ES2.x	: 792 MHz (OPP Turbo)
+ * 4460		: 920 MHz (OPP Turbo) - DCC disabled
+ */
+void configure_mpu_dpll(void)
+{
+	const struct dpll_params *params;
+	struct dpll_regs *mpu_dpll_regs;
+	u32 omap_rev;
+	omap_rev = omap_revision();
+
+	/*
+	 * DCC and clock divider settings for 4460.
+	 * DCC is required, if more than a certain frequency is required.
+	 * For, 4460 > 1GHZ.
+	 *     5430 > 1.4GHZ.
+	 */
+	if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) {
+		mpu_dpll_regs =
+			(struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu);
+		bypass_dpll((*prcm)->cm_clkmode_dpll_mpu);
+		clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl,
+			MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
+		setbits_le32((*prcm)->cm_mpu_mpu_clkctrl,
+			MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
+		clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll,
+			CM_CLKSEL_DCC_EN_MASK);
+	}
+
+	params = get_mpu_dpll_params(*dplls_data);
+
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu");
+	debug("MPU DPLL locked\n");
+}
+
+#if defined(CONFIG_USB_EHCI_OMAP) || defined(CONFIG_USB_XHCI_OMAP) || \
+	defined(CONFIG_USB_MUSB_OMAP2PLUS)
+static void setup_usb_dpll(void)
+{
+	const struct dpll_params *params;
+	u32 sys_clk_khz, sd_div, num, den;
+
+	sys_clk_khz = get_sys_clk_freq() / 1000;
+	/*
+	 * USB:
+	 * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction
+	 * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250)
+	 *      - where CLKINP is sys_clk in MHz
+	 * Use CLKINP in KHz and adjust the denominator accordingly so
+	 * that we have enough accuracy and at the same time no overflow
+	 */
+	params = get_usb_dpll_params(*dplls_data);
+	num = params->m * sys_clk_khz;
+	den = (params->n + 1) * 250 * 1000;
+	num += den - 1;
+	sd_div = num / den;
+	clrsetbits_le32((*prcm)->cm_clksel_dpll_usb,
+			CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK,
+			sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT);
+
+	/* Now setup the dpll with the regular function */
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb");
+}
+#endif
+
+static void setup_dplls(void)
+{
+	u32 temp;
+	const struct dpll_params *params;
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+
+	debug("setup_dplls\n");
+
+	/* CORE dpll */
+	params = get_core_dpll_params(*dplls_data);	/* default - safest */
+	/*
+	 * Do not lock the core DPLL now. Just set it up.
+	 * Core DPLL will be locked after setting up EMIF
+	 * using the FREQ_UPDATE method(freq_update_core())
+	 */
+	if (emif_sdram_type(readl(&emif->emif_sdram_config)) ==
+	    EMIF_SDRAM_TYPE_LPDDR2)
+		do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params,
+							DPLL_NO_LOCK, "core");
+	else
+		do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params,
+							DPLL_LOCK, "core");
+	/* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
+	temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
+	    (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
+	    (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
+	writel(temp, (*prcm)->cm_clksel_core);
+	debug("Core DPLL configured\n");
+
+	/* lock PER dpll */
+	params = get_per_dpll_params(*dplls_data);
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_per,
+			params, DPLL_LOCK, "per");
+	debug("PER DPLL locked\n");
+
+	/* MPU dpll */
+	configure_mpu_dpll();
+
+#if defined(CONFIG_USB_EHCI_OMAP) || defined(CONFIG_USB_XHCI_OMAP) || \
+	defined(CONFIG_USB_MUSB_OMAP2PLUS)
+	setup_usb_dpll();
+#endif
+	params = get_ddr_dpll_params(*dplls_data);
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_ddrphy,
+		      params, DPLL_LOCK, "ddr");
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+	params = get_gmac_dpll_params(*dplls_data);
+	do_setup_dpll((*prcm)->cm_clkmode_dpll_gmac, params,
+		      DPLL_LOCK, "gmac");
+#endif
+}
+
+u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic)
+{
+	u32 offset_code;
+
+	volt_offset -= pmic->base_offset;
+
+	offset_code = (volt_offset + pmic->step - 1) / pmic->step;
+
+	/*
+	 * Offset codes 1-6 all give the base voltage in Palmas
+	 * Offset code 0 switches OFF the SMPS
+	 */
+	return offset_code + pmic->start_code;
+}
+
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
+{
+	u32 offset_code;
+	u32 offset = volt_mv;
+	int ret = 0;
+
+	if (!volt_mv)
+		return;
+
+	pmic->pmic_bus_init();
+	/* See if we can first get the GPIO if needed */
+	if (pmic->gpio_en)
+		ret = gpio_request(pmic->gpio, "PMIC_GPIO");
+
+	if (ret < 0) {
+		printf("%s: gpio %d request failed %d\n", __func__,
+							pmic->gpio, ret);
+		return;
+	}
+
+	/* Pull the GPIO low to select SET0 register, while we program SET1 */
+	if (pmic->gpio_en)
+		gpio_direction_output(pmic->gpio, 0);
+
+	/* convert to uV for better accuracy in the calculations */
+	offset *= 1000;
+
+	offset_code = get_offset_code(offset, pmic);
+
+	debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
+		offset_code);
+
+	if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code))
+		printf("Scaling voltage failed for 0x%x\n", vcore_reg);
+	if (pmic->gpio_en)
+		gpio_direction_output(pmic->gpio, 1);
+}
+
+int __weak get_voltrail_opp(int rail_offset)
+{
+	/*
+	 * By default return OPP_NOM for all voltage rails.
+	 */
+	return OPP_NOM;
+}
+
+static u32 optimize_vcore_voltage(struct volts const *v, int opp)
+{
+	u32 val;
+
+	if (!v->value[opp])
+		return 0;
+	if (!v->efuse.reg[opp])
+		return v->value[opp];
+
+	switch (v->efuse.reg_bits) {
+	case 16:
+		val = readw(v->efuse.reg[opp]);
+		break;
+	case 32:
+		val = readl(v->efuse.reg[opp]);
+		break;
+	default:
+		printf("Error: efuse 0x%08x bits=%d unknown\n",
+		       v->efuse.reg[opp], v->efuse.reg_bits);
+		return v->value[opp];
+	}
+
+	if (!val) {
+		printf("Error: efuse 0x%08x bits=%d val=0, using %d\n",
+		       v->efuse.reg[opp], v->efuse.reg_bits, v->value[opp]);
+		return v->value[opp];
+	}
+
+	debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n",
+	      __func__, v->efuse.reg[opp], v->efuse.reg_bits, v->value[opp],
+	      val);
+	return val;
+}
+
+#ifdef CONFIG_IODELAY_RECALIBRATION
+void __weak recalibrate_iodelay(void)
+{
+}
+#endif
+
+/*
+ * Setup the voltages for the main SoC core power domains.
+ * We start with the maximum voltages allowed here, as set in the corresponding
+ * vcores_data struct, and then scale (usually down) to the fused values that
+ * are retrieved from the SoC. The scaling happens only if the efuse.reg fields
+ * are initialised.
+ * Rail grouping is supported for the DRA7xx SoCs only, therefore the code is
+ * compiled conditionally. Note that the new code writes the scaled (or zeroed)
+ * values back to the vcores_data struct for eventual reuse. Zero values mean
+ * that the corresponding rails are not controlled separately, and are not sent
+ * to the PMIC.
+ */
+void scale_vcores(struct vcores_data const *vcores)
+{
+	int i, opp, j, ol;
+	struct volts *pv = (struct volts *)vcores;
+	struct volts *px;
+
+	for (i=0; i<(sizeof(struct vcores_data)/sizeof(struct volts)); i++) {
+		opp = get_voltrail_opp(i);
+		debug("%d -> ", pv->value[opp]);
+
+		if (pv->value[opp]) {
+			/* Handle non-empty members only */
+			pv->value[opp] = optimize_vcore_voltage(pv, opp);
+     			px = (struct volts *)vcores;
+			j = 0;
+			while (px < pv) {
+				/*
+				 * Scan already handled non-empty members to see
+				 * if we have a group and find the max voltage,
+				 * which is set to the first occurance of the
+				 * particular SMPS; the other group voltages are
+				 * zeroed.
+				 */
+				ol = get_voltrail_opp(j);
+				if (px->value[ol] &&
+				    (pv->pmic->i2c_slave_addr ==
+				     px->pmic->i2c_slave_addr) &&
+				    (pv->addr == px->addr)) {
+					/* Same PMIC, same SMPS */
+					if (pv->value[opp] > px->value[ol])
+						px->value[ol] = pv->value[opp];
+
+					pv->value[opp] = 0;
+				}
+				px++;
+				j++;
+			}
+		}
+		debug("%d\n", pv->value[opp]);
+		pv++;
+	}
+
+	opp = get_voltrail_opp(VOLT_CORE);
+	debug("cor: %d\n", vcores->core.value[opp]);
+	do_scale_vcore(vcores->core.addr, vcores->core.value[opp],
+		       vcores->core.pmic);
+	/*
+	 * IO delay recalibration should be done immediately after
+	 * adjusting AVS voltages for VDD_CORE_L.
+	 * Respective boards should call __recalibrate_iodelay()
+	 * with proper mux, virtual and manual mode configurations.
+	 */
+#ifdef CONFIG_IODELAY_RECALIBRATION
+	recalibrate_iodelay();
+#endif
+
+	opp = get_voltrail_opp(VOLT_MPU);
+	debug("mpu: %d\n", vcores->mpu.value[opp]);
+	do_scale_vcore(vcores->mpu.addr, vcores->mpu.value[opp],
+		       vcores->mpu.pmic);
+	/* Configure MPU ABB LDO after scale */
+	abb_setup(vcores->mpu.efuse.reg[opp],
+		  (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl,
+		  (*prcm)->prm_abbldo_mpu_setup,
+		  (*prcm)->prm_abbldo_mpu_ctrl,
+		  (*prcm)->prm_irqstatus_mpu_2,
+		  vcores->mpu.abb_tx_done_mask,
+		  OMAP_ABB_FAST_OPP);
+
+	opp = get_voltrail_opp(VOLT_MM);
+	debug("mm: %d\n", vcores->mm.value[opp]);
+	do_scale_vcore(vcores->mm.addr, vcores->mm.value[opp],
+		       vcores->mm.pmic);
+	/* Configure MM ABB LDO after scale */
+	abb_setup(vcores->mm.efuse.reg[opp],
+		  (*ctrl)->control_wkup_ldovbb_mm_voltage_ctrl,
+		  (*prcm)->prm_abbldo_mm_setup,
+		  (*prcm)->prm_abbldo_mm_ctrl,
+		  (*prcm)->prm_irqstatus_mpu,
+		  vcores->mm.abb_tx_done_mask,
+		  OMAP_ABB_FAST_OPP);
+
+	opp = get_voltrail_opp(VOLT_GPU);
+	debug("gpu: %d\n", vcores->gpu.value[opp]);
+	do_scale_vcore(vcores->gpu.addr, vcores->gpu.value[opp],
+		       vcores->gpu.pmic);
+	/* Configure GPU ABB LDO after scale */
+	abb_setup(vcores->gpu.efuse.reg[opp],
+		  (*ctrl)->control_wkup_ldovbb_gpu_voltage_ctrl,
+		  (*prcm)->prm_abbldo_gpu_setup,
+		  (*prcm)->prm_abbldo_gpu_ctrl,
+		  (*prcm)->prm_irqstatus_mpu,
+		  vcores->gpu.abb_tx_done_mask,
+		  OMAP_ABB_FAST_OPP);
+
+	opp = get_voltrail_opp(VOLT_EVE);
+	debug("eve: %d\n", vcores->eve.value[opp]);
+	do_scale_vcore(vcores->eve.addr, vcores->eve.value[opp],
+		       vcores->eve.pmic);
+	/* Configure EVE ABB LDO after scale */
+	abb_setup(vcores->eve.efuse.reg[opp],
+		  (*ctrl)->control_wkup_ldovbb_eve_voltage_ctrl,
+		  (*prcm)->prm_abbldo_eve_setup,
+		  (*prcm)->prm_abbldo_eve_ctrl,
+		  (*prcm)->prm_irqstatus_mpu,
+		  vcores->eve.abb_tx_done_mask,
+		  OMAP_ABB_FAST_OPP);
+
+	opp = get_voltrail_opp(VOLT_IVA);
+	debug("iva: %d\n", vcores->iva.value[opp]);
+	do_scale_vcore(vcores->iva.addr, vcores->iva.value[opp],
+		       vcores->iva.pmic);
+	/* Configure IVA ABB LDO after scale */
+	abb_setup(vcores->iva.efuse.reg[opp],
+		  (*ctrl)->control_wkup_ldovbb_iva_voltage_ctrl,
+		  (*prcm)->prm_abbldo_iva_setup,
+		  (*prcm)->prm_abbldo_iva_ctrl,
+		  (*prcm)->prm_irqstatus_mpu,
+		  vcores->iva.abb_tx_done_mask,
+		  OMAP_ABB_FAST_OPP);
+}
+
+static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode)
+{
+	clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+			enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
+	debug("Enable clock domain - %x\n", clkctrl_reg);
+}
+
+static inline void disable_clock_domain(u32 const clkctrl_reg)
+{
+	clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_SW_SLEEP <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
+	debug("Disable clock domain - %x\n", clkctrl_reg);
+}
+
+static inline void wait_for_clk_enable(u32 clkctrl_addr)
+{
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+	u32 bound = LDELAY;
+
+	while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+		(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+
+		clkctrl = readl(clkctrl_addr);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			 MODULE_CLKCTRL_IDLEST_SHIFT;
+		if (--bound == 0) {
+			printf("Clock enable failed for 0x%x idlest 0x%x\n",
+				clkctrl_addr, clkctrl);
+			return;
+		}
+	}
+}
+
+static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode,
+				u32 wait_for_enable)
+{
+	clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+			enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	debug("Enable clock module - %x\n", clkctrl_addr);
+	if (wait_for_enable)
+		wait_for_clk_enable(clkctrl_addr);
+}
+
+static inline void wait_for_clk_disable(u32 clkctrl_addr)
+{
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL;
+	u32 bound = LDELAY;
+
+	while ((idlest != MODULE_CLKCTRL_IDLEST_DISABLED)) {
+		clkctrl = readl(clkctrl_addr);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			 MODULE_CLKCTRL_IDLEST_SHIFT;
+		if (--bound == 0) {
+			printf("Clock disable failed for 0x%x idlest 0x%x\n",
+			       clkctrl_addr, clkctrl);
+			return;
+		}
+	}
+}
+
+static inline void disable_clock_module(u32 const clkctrl_addr,
+					u32 wait_for_disable)
+{
+	clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_DISABLE <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	debug("Disable clock module - %x\n", clkctrl_addr);
+	if (wait_for_disable)
+		wait_for_clk_disable(clkctrl_addr);
+}
+
+void freq_update_core(void)
+{
+	u32 freq_config1 = 0;
+	const struct dpll_params *core_dpll_params;
+	u32 omap_rev = omap_revision();
+
+	core_dpll_params = get_core_dpll_params(*dplls_data);
+	/* Put EMIF clock domain in sw wakeup mode */
+	enable_clock_domain((*prcm)->cm_memif_clkstctrl,
+				CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+	wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl);
+	wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl);
+
+	freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK |
+	    SHADOW_FREQ_CONFIG1_DLL_RESET_MASK;
+
+	freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) &
+				SHADOW_FREQ_CONFIG1_DPLL_EN_MASK;
+
+	freq_config1 |= (core_dpll_params->m2 <<
+			SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) &
+			SHADOW_FREQ_CONFIG1_M2_DIV_MASK;
+
+	writel(freq_config1, (*prcm)->cm_shadow_freq_config1);
+	if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0,
+			(u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) {
+		puts("FREQ UPDATE procedure failed!!");
+		hang();
+	}
+
+	/*
+	 * Putting EMIF in HW_AUTO is seen to be causing issues with
+	 * EMIF clocks and the master DLL. Keep EMIF in SW_WKUP
+	 * in OMAP5430 ES1.0 silicon
+	 */
+	if (omap_rev != OMAP5430_ES1_0) {
+		/* Put EMIF clock domain back in hw auto mode */
+		enable_clock_domain((*prcm)->cm_memif_clkstctrl,
+					CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+		wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl);
+		wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl);
+	}
+}
+
+void bypass_dpll(u32 const base)
+{
+	do_bypass_dpll(base);
+	wait_for_bypass(base);
+}
+
+void lock_dpll(u32 const base)
+{
+	do_lock_dpll(base);
+	wait_for_lock(base);
+}
+
+static void setup_clocks_for_console(void)
+{
+	/* Do not add any spl_debug prints in this function */
+	clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
+
+	/* Enable all UARTs - console will be on one of them */
+	clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+	clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+	clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+	clrsetbits_le32((*prcm)->cm_l4per_uart4_clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+	clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_HW_AUTO <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
+}
+
+void do_enable_clocks(u32 const *clk_domains,
+			    u32 const *clk_modules_hw_auto,
+			    u32 const *clk_modules_explicit_en,
+			    u8 wait_for_enable)
+{
+	u32 i, max = 100;
+
+	/* Put the clock domains in SW_WKUP mode */
+	for (i = 0; (i < max) && clk_domains && clk_domains[i]; i++) {
+		enable_clock_domain(clk_domains[i],
+				    CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+	}
+
+	/* Clock modules that need to be put in HW_AUTO */
+	for (i = 0; (i < max) && clk_modules_hw_auto &&
+		     clk_modules_hw_auto[i]; i++) {
+		enable_clock_module(clk_modules_hw_auto[i],
+				    MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+				    wait_for_enable);
+	};
+
+	/* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+	for (i = 0; (i < max) && clk_modules_explicit_en &&
+		     clk_modules_explicit_en[i]; i++) {
+		enable_clock_module(clk_modules_explicit_en[i],
+				    MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+				    wait_for_enable);
+	};
+
+	/* Put the clock domains in HW_AUTO mode now */
+	for (i = 0; (i < max) && clk_domains && clk_domains[i]; i++) {
+		enable_clock_domain(clk_domains[i],
+				    CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+	}
+}
+
+void do_disable_clocks(u32 const *clk_domains,
+			    u32 const *clk_modules_disable,
+			    u8 wait_for_disable)
+{
+	u32 i, max = 100;
+
+
+	/* Clock modules that need to be put in SW_DISABLE */
+	for (i = 0; (i < max) && clk_modules_disable[i]; i++)
+		disable_clock_module(clk_modules_disable[i],
+				     wait_for_disable);
+
+	/* Put the clock domains in SW_SLEEP mode */
+	for (i = 0; (i < max) && clk_domains[i]; i++)
+		disable_clock_domain(clk_domains[i]);
+}
+
+/**
+ * setup_early_clocks() - Setup early clocks needed for SoC
+ *
+ * Setup clocks for console, SPL basic initialization clocks and initialize
+ * the timer. This is invoked prior prcm_init.
+ */
+void setup_early_clocks(void)
+{
+	switch (omap_hw_init_context()) {
+	case OMAP_INIT_CONTEXT_SPL:
+	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
+	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
+		setup_clocks_for_console();
+		enable_basic_clocks();
+		timer_init();
+		/* Fall through */
+	}
+}
+
+void prcm_init(void)
+{
+	switch (omap_hw_init_context()) {
+	case OMAP_INIT_CONTEXT_SPL:
+	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
+	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
+		scale_vcores(*omap_vcores);
+		setup_dplls();
+		setup_warmreset_time();
+		break;
+	default:
+		break;
+	}
+
+	if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context())
+		enable_basic_uboot_clocks();
+}
+
+#if !CONFIG_IS_ENABLED(DM_I2C)
+void gpi2c_init(void)
+{
+	static int gpi2c = 1;
+
+	if (gpi2c) {
+		i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE);
+		gpi2c = 0;
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/config.mk b/roms/u-boot/arch/arm/mach-omap2/config.mk
new file mode 100644
index 000000000..4f0d2598f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/config.mk
@@ -0,0 +1,67 @@
+#
+# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+#
+# SPDX-License-Identifier:      GPL-2.0+
+
+include  $(srctree)/arch/arm/mach-omap2/config_secure.mk
+
+ifdef CONFIG_SPL_BUILD
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y) # Refer to README.ti-secure for more info
+# On DRA7xx/AM57xx:
+#
+# For booting spl from SD/MMC/eMMC use
+# u-boot-spl_HS_MLO
+#
+# For booting spl over UART or USB use
+# u-boot-spl_HS_ULO
+#
+# For booting spl from QSPI or NOR use
+# u-boot-spl_HS_X-LOADER
+ifeq ($(CONFIG_OMAP54XX),y)
+INPUTS-y += u-boot-spl_HS_MLO
+INPUTS-y += u-boot-spl_HS_ULO
+INPUTS-y += u-boot-spl_HS_X-LOADER
+endif
+# On AM43XX:
+#
+# For booting spl from SPI flash use
+# u-boot-spl_HS_SPI_X-LOADER
+#
+# For booting spl from all other media use
+# u-boot-spl_HS_ISSW
+ifeq ($(CONFIG_AM43XX),y)
+INPUTS-y += u-boot-spl_HS_SPI_X-LOADER
+INPUTS-y += u-boot-spl_HS_ISSW
+endif
+# On AM33XX:
+#
+# For booting spl from SPI flash use
+# u-boot-spl_HS_SPI_X-LOADER
+#
+# For booting spl from NAND flash or raw SD/MMC/eMMC use
+# u-boot-spl_HS_X-LOADER
+#
+# For booting spl from a filesystem on SD/MMC/eMMC use
+# u-boot-spl_HS_MLO
+#
+# For booting spl over UART, USB, or Ethernet use
+# u-boot-spl_HS_2ND
+ifeq ($(CONFIG_AM33XX),y)
+INPUTS-y += u-boot-spl_HS_SPI_X-LOADER
+INPUTS-y += u-boot-spl_HS_X-LOADER
+INPUTS-y += u-boot-spl_HS_MLO
+INPUTS-y += u-boot-spl_HS_2ND
+endif
+else
+INPUTS-y += MLO
+ifeq ($(CONFIG_AM33XX),y)
+INPUTS-y += MLO.byteswap
+endif
+endif
+else
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+INPUTS-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER
+INPUTS-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
+endif
+INPUTS-y += u-boot.img
+endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/config_secure.mk b/roms/u-boot/arch/arm/mach-omap2/config_secure.mk
new file mode 100644
index 000000000..ebdc00fde
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/config_secure.mk
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2016, Texas Instruments, Incorporated - http://www.ti.com/
+quiet_cmd_mkomapsecimg = SECURE  $@
+ifneq ($(TI_SECURE_DEV_PKG),)
+ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh),)
+ifneq ($(CONFIG_SPL_BUILD),)
+cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \
+	$(patsubst u-boot-spl_HS_%,%,$(@F)) $< $@ $(CONFIG_ISW_ENTRY_ADDR) \
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+else
+cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \
+	$(patsubst u-boot_HS_%,%,$(@F)) $< $@ $(CONFIG_ISW_ENTRY_ADDR) \
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+endif
+else
+cmd_mkomapsecimg = echo "WARNING:" \
+	"$(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh not found." \
+	"$@ was NOT secured!"; cp $< $@
+endif
+else
+cmd_mkomapsecimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
+	"variable must be defined for TI secure devices. \
+	$@ was NOT secured!"; cp $< $@
+endif
+
+ifdef CONFIG_SPL_LOAD_FIT
+quiet_cmd_omapsecureimg = SECURE  $@
+ifneq ($(TI_SECURE_DEV_PKG),)
+ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh),)
+cmd_omapsecureimg = $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh \
+	$< $@ \
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+else
+cmd_omapsecureimg = echo "WARNING:" \
+	"$(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh not found." \
+	"$@ was NOT secured!"; cp $< $@
+endif
+else
+cmd_omapsecureimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
+	"variable must be defined for TI secure devices." \
+	"$@ was NOT secured!"; cp $< $@
+endif
+endif
+
+
+# Standard X-LOADER target (QPSI, NOR flash)
+u-boot-spl_HS_X-LOADER: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkomapsecimg)
+
+# For MLO targets (SD card boot) the final file name that is copied to the SD
+# card FAT partition must be MLO, so we make a copy of the output file to a new
+# file with that name
+u-boot-spl_HS_MLO: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkomapsecimg)
+	@if [ -f $@ ]; then \
+		cp -f $@ MLO; \
+	fi
+
+# Standard 2ND target (certain peripheral boot modes)
+u-boot-spl_HS_2ND: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkomapsecimg)
+
+# Standard ULO target (certain peripheral boot modes)
+u-boot-spl_HS_ULO: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkomapsecimg)
+
+# Standard ISSW target (certain devices, various boot modes), when copied to
+# an SD card FAT partition this file must be called "MLO", we make a copy with
+# this name to make this clear
+u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkomapsecimg)
+	@if [ -f $@ ]; then \
+		cp -f $@ MLO; \
+	fi
+
+# For SPI flash on AM335x and AM43xx, these require special byte swap handling
+# so we use the SPI_X-LOADER target instead of X-LOADER and let the
+# create-boot-image.sh script handle that
+u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkomapsecimg)
+
+# For supporting single stage boot on keystone, the image is a full u-boot
+# file, not an SPL. This will work for all boot devices, other than SPI
+# flash. On Keystone devices when booting from an SD card FAT partition this
+# file must be called "MLO"
+u-boot_HS_MLO: $(obj)/u-boot.bin
+	$(call if_changed,mkomapsecimg)
+	@if [ -f $@ ]; then \
+		cp -f $@ MLO; \
+	fi
+
+# For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot
+# file, not an SPL. In this case the mkomapsecimg command looks for a
+# u-boot-HS_* prefix
+u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
+	$(call if_changed,mkomapsecimg)
+
+# For supporting the SPL loading and interpreting of FIT images whose
+# components are pre-processed before being integrated into the FIT image in
+# order to secure them in some way
+ifdef CONFIG_SPL_LOAD_FIT
+
+MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
+	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
+
+OF_LIST_TARGETS = $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
+$(OF_LIST_TARGETS): dtbs
+
+%.dtb_HS: %.dtb FORCE
+	$(call if_changed,omapsecureimg)
+
+u-boot-nodtb_HS.bin: u-boot-nodtb.bin FORCE
+	$(call if_changed,omapsecureimg)
+
+u-boot_HS.img: u-boot-nodtb_HS.bin u-boot.img $(patsubst %.dtb,%.dtb_HS,$(OF_LIST_TARGETS)) FORCE
+	$(call if_changed,mkimage)
+	$(Q)if [ -f $@ ]; then \
+		cp -f $@ u-boot.img; \
+	fi
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/emif-common.c b/roms/u-boot/arch/arm/mach-omap2/emif-common.c
new file mode 100644
index 000000000..312f868fb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/emif-common.c
@@ -0,0 +1,1606 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <net.h>
+#include <asm/emif.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/omap_sec_common.h>
+#include <asm/utils.h>
+#include <linux/compiler.h>
+#include <asm/ti-common/ti-edma3.h>
+#include <linux/delay.h>
+
+static int emif1_enabled = -1, emif2_enabled = -1;
+
+void set_lpmode_selfrefresh(u32 base)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+	u32 reg;
+
+	reg = readl(&emif->emif_pwr_mgmt_ctrl);
+	reg &= ~EMIF_REG_LP_MODE_MASK;
+	reg |= LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT;
+	reg &= ~EMIF_REG_SR_TIM_MASK;
+	writel(reg, &emif->emif_pwr_mgmt_ctrl);
+
+	/* dummy read for the new SR_TIM to be loaded */
+	readl(&emif->emif_pwr_mgmt_ctrl);
+}
+
+void force_emif_self_refresh()
+{
+	set_lpmode_selfrefresh(EMIF1_BASE);
+	if (!is_dra72x())
+		set_lpmode_selfrefresh(EMIF2_BASE);
+}
+
+inline u32 emif_num(u32 base)
+{
+	if (base == EMIF1_BASE)
+		return 1;
+	else if (base == EMIF2_BASE)
+		return 2;
+	else
+		return 0;
+}
+
+static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
+{
+	u32 mr;
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
+	writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
+	if (omap_revision() == OMAP4430_ES2_0)
+		mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
+	else
+		mr = readl(&emif->emif_lpddr2_mode_reg_data);
+	debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base),
+	      cs, mr_addr, mr);
+	if (((mr & 0x0000ff00) >>  8) == (mr & 0xff) &&
+	    ((mr & 0x00ff0000) >> 16) == (mr & 0xff) &&
+	    ((mr & 0xff000000) >> 24) == (mr & 0xff))
+		return mr & 0xff;
+	else
+		return mr;
+}
+
+static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
+	writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
+	writel(mr_val, &emif->emif_lpddr2_mode_reg_data);
+}
+
+void emif_reset_phy(u32 base)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+	u32 iodft;
+
+	iodft = readl(&emif->emif_iodft_tlgc);
+	iodft |= EMIF_REG_RESET_PHY_MASK;
+	writel(iodft, &emif->emif_iodft_tlgc);
+}
+
+static void do_lpddr2_init(u32 base, u32 cs)
+{
+	u32 mr_addr;
+	const struct lpddr2_mr_regs *mr_regs;
+
+	get_lpddr2_mr_regs(&mr_regs);
+	/* Wait till device auto initialization is complete */
+	while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
+		;
+	set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10);
+	/*
+	 * tZQINIT = 1 us
+	 * Enough loops assuming a maximum of 2GHz
+	 */
+
+	sdelay(2000);
+
+	set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1);
+	set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16);
+
+	/*
+	 * Enable refresh along with writing MR2
+	 * Encoding of RL in MR2 is (RL - 2)
+	 */
+	mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
+	set_mr(base, cs, mr_addr, mr_regs->mr2);
+
+	if (mr_regs->mr3 > 0)
+		set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3);
+}
+
+static void lpddr2_init(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	/* Not NVM */
+	clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK);
+
+	/*
+	 * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM
+	 * when EMIF_SDRAM_CONFIG register is written
+	 */
+	setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
+
+	/*
+	 * Set the SDRAM_CONFIG and PHY_CTRL for the
+	 * un-locked frequency & default RL
+	 */
+	writel(regs->sdram_config_init, &emif->emif_sdram_config);
+	writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
+
+	do_ext_phy_settings(base, regs);
+
+	do_lpddr2_init(base, CS0);
+	if (regs->sdram_config & EMIF_REG_EBANK_MASK)
+		do_lpddr2_init(base, CS1);
+
+	writel(regs->sdram_config, &emif->emif_sdram_config);
+	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+
+	/* Enable refresh now */
+	clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
+
+	}
+
+__weak void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
+{
+}
+
+void emif_update_timings(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	if (!is_dra7xx())
+		writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw);
+	else
+		writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl_shdw);
+
+	writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw);
+	writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw);
+	writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw);
+	if (omap_revision() == OMAP4430_ES1_0) {
+		/* ES1 bug EMIF should be in force idle during freq_update */
+		writel(0, &emif->emif_pwr_mgmt_ctrl);
+	} else {
+		writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl);
+		writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw);
+	}
+	writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw);
+	writel(regs->zq_config, &emif->emif_zq_config);
+	writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
+	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+
+	if ((omap_revision() >= OMAP5430_ES1_0) || is_dra7xx()) {
+		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
+			&emif->emif_l3_config);
+	} else if (omap_revision() >= OMAP4460_ES1_0) {
+		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
+			&emif->emif_l3_config);
+	} else {
+		writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0,
+			&emif->emif_l3_config);
+	}
+}
+
+#ifndef CONFIG_OMAP44XX
+static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	/* keep sdram in self-refresh */
+	writel(((LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT)
+		& EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
+	__udelay(130);
+
+	/*
+	 * Set invert_clkout (if activated)--DDR_PHYCTRL_1
+	 * Invert clock adds an additional half cycle delay on the
+	 * command interface.  The additional half cycle, is usually
+	 * meant to enable leveling in the situation that DQS is later
+	 * than CK on the board.It also helps provide some additional
+	 * margin for leveling.
+	 */
+	writel(regs->emif_ddr_phy_ctlr_1,
+	       &emif->emif_ddr_phy_ctrl_1);
+
+	writel(regs->emif_ddr_phy_ctlr_1,
+	       &emif->emif_ddr_phy_ctrl_1_shdw);
+	__udelay(130);
+
+	writel(((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)
+	       & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
+
+	/* Launch Full leveling */
+	writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
+
+	/* Wait till full leveling is complete */
+	readl(&emif->emif_rd_wr_lvl_ctl);
+	      __udelay(130);
+
+	/* Read data eye leveling no of samples */
+	config_data_eye_leveling_samples(base);
+
+	/*
+	 * Launch 8 incremental WR_LVL- to compensate for
+	 * PHY limitation.
+	 */
+	writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT,
+	       &emif->emif_rd_wr_lvl_ctl);
+
+	__udelay(130);
+
+	/* Launch Incremental leveling */
+	writel(DDR3_INC_LVL, &emif->emif_rd_wr_lvl_ctl);
+	       __udelay(130);
+}
+
+static void update_hwleveling_output(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+	u32 *emif_ext_phy_ctrl_reg, *emif_phy_status;
+	u32 reg, i, phy;
+
+	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[6];
+	phy = readl(&emif->emif_ddr_phy_ctrl_1);
+
+	/* Update PHY_REG_RDDQS_RATIO */
+	emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_7;
+	if (!(phy & EMIF_DDR_PHY_CTRL_1_RDLVL_MASK_MASK))
+		for (i = 0; i < PHY_RDDQS_RATIO_REGS; i++) {
+			reg = readl(emif_phy_status++);
+			writel(reg, emif_ext_phy_ctrl_reg++);
+			writel(reg, emif_ext_phy_ctrl_reg++);
+		}
+
+	/* Update PHY_REG_FIFO_WE_SLAVE_RATIO */
+	emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_2;
+	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[11];
+	if (!(phy & EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_MASK))
+		for (i = 0; i < PHY_FIFO_WE_SLAVE_RATIO_REGS; i++) {
+			reg = readl(emif_phy_status++);
+			writel(reg, emif_ext_phy_ctrl_reg++);
+			writel(reg, emif_ext_phy_ctrl_reg++);
+		}
+
+	/* Update PHY_REG_WR_DQ/DQS_SLAVE_RATIO */
+	emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_12;
+	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[16];
+	if (!(phy & EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_MASK))
+		for (i = 0; i < PHY_REG_WR_DQ_SLAVE_RATIO_REGS; i++) {
+			reg = readl(emif_phy_status++);
+			writel(reg, emif_ext_phy_ctrl_reg++);
+			writel(reg, emif_ext_phy_ctrl_reg++);
+		}
+
+	/* Disable Leveling */
+	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+	writel(0x0, &emif->emif_rd_wr_lvl_rmp_ctl);
+}
+
+static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	/* Clear Error Status */
+	clrsetbits_le32(&emif->emif_ddr_ext_phy_ctrl_36,
+			EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR,
+			EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR);
+
+	clrsetbits_le32(&emif->emif_ddr_ext_phy_ctrl_36_shdw,
+			EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR,
+			EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR);
+
+	/* Disable refreshed before leveling */
+	clrsetbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK,
+			EMIF_REG_INITREF_DIS_MASK);
+
+	/* Start Full leveling */
+	writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
+
+	__udelay(300);
+
+	/* Check for leveling timeout */
+	if (readl(&emif->emif_status) & EMIF_REG_LEVELING_TO_MASK) {
+		printf("Leveling timeout on EMIF%d\n", emif_num(base));
+		return;
+	}
+
+	/* Enable refreshes after leveling */
+	clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
+
+	debug("HW leveling success\n");
+	/*
+	 * Update slave ratios in EXT_PHY_CTRLx registers
+	 * as per HW leveling output
+	 */
+	update_hwleveling_output(base, regs);
+}
+
+static void dra7_reset_ddr_data(u32 base, u32 size)
+{
+#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
+	enable_edma3_clocks();
+
+	edma3_fill(EDMA3_BASE, 1, (void *)base, 0, size);
+
+	disable_edma3_clocks();
+#else
+	memset((void *)base, 0, size);
+#endif
+}
+
+static void dra7_enable_ecc(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+	u32 rgn, rgn_start, size, ctrl_reg;
+
+	/* ECC available only on dra76x EMIF1 */
+	if ((base != EMIF1_BASE) || !is_dra76x())
+		return;
+
+	if (regs->emif_ecc_ctrl_reg & EMIF_ECC_CTRL_REG_ECC_EN_MASK) {
+		/* Disable high-order interleaving */
+		clrbits_le32(MA_PRIORITY, MA_HIMEM_INTERLEAVE_UN_MASK);
+
+#ifdef CONFIG_DRA7XX
+		/* Clear the status flags and other history */
+		writel(readl(&emif->emif_1b_ecc_err_cnt),
+		       &emif->emif_1b_ecc_err_cnt);
+		writel(0xffffffff, &emif->emif_1b_ecc_err_dist_1);
+		writel(0x2, &emif->emif_1b_ecc_err_addr_log);
+		writel(0x1, &emif->emif_2b_ecc_err_addr_log);
+		writel(EMIF_INT_WR_ECC_ERR_SYS_MASK |
+		       EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK |
+		       EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK,
+		       &emif->emif_irqstatus_sys);
+#endif
+		writel(regs->emif_ecc_address_range_1,
+		       &emif->emif_ecc_address_range_1);
+		writel(regs->emif_ecc_address_range_2,
+		       &emif->emif_ecc_address_range_2);
+
+		/* Disable RMW and ECC verification for read accesses */
+		ctrl_reg = (regs->emif_ecc_ctrl_reg &
+			    ~EMIF_ECC_REG_RMW_EN_MASK) |
+			   EMIF_ECC_CTRL_REG_ECC_VERIFY_DIS_MASK;
+		writel(ctrl_reg, &emif->emif_ecc_ctrl_reg);
+
+		/* Set region1 memory with 0 */
+		rgn_start = (regs->emif_ecc_address_range_1 &
+			     EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16;
+		rgn = rgn_start + CONFIG_SYS_SDRAM_BASE;
+		size = (regs->emif_ecc_address_range_1 &
+			EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000 - rgn_start;
+
+		if (regs->emif_ecc_ctrl_reg &
+		    EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK)
+			dra7_reset_ddr_data(rgn, size);
+
+		/* Set region2 memory with 0 */
+		rgn_start = (regs->emif_ecc_address_range_2 &
+			     EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16;
+		rgn = rgn_start + CONFIG_SYS_SDRAM_BASE;
+		size = (regs->emif_ecc_address_range_2 &
+			EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000 - rgn_start;
+
+		if (regs->emif_ecc_ctrl_reg &
+		    EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK)
+			dra7_reset_ddr_data(rgn, size);
+
+		/* Default value enables RMW and ECC verification */
+		writel(regs->emif_ecc_ctrl_reg, &emif->emif_ecc_ctrl_reg);
+	}
+}
+
+static void dra7_ddr3_init(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	if (warm_reset()) {
+		emif_reset_phy(base);
+		writel(0x0, &emif->emif_pwr_mgmt_ctrl);
+	}
+	do_ext_phy_settings(base, regs);
+
+	writel(regs->ref_ctrl | EMIF_REG_INITREF_DIS_MASK,
+	       &emif->emif_sdram_ref_ctrl);
+	/* Update timing registers */
+	writel(regs->sdram_tim1, &emif->emif_sdram_tim_1);
+	writel(regs->sdram_tim2, &emif->emif_sdram_tim_2);
+	writel(regs->sdram_tim3, &emif->emif_sdram_tim_3);
+
+	writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, &emif->emif_l3_config);
+	writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
+	writel(regs->zq_config, &emif->emif_zq_config);
+	writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
+	writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
+	writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
+
+	writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
+	writel(regs->emif_rd_wr_exec_thresh, &emif->emif_rd_wr_exec_thresh);
+
+	writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
+
+	writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
+	writel(regs->sdram_config_init, &emif->emif_sdram_config);
+
+	__udelay(1000);
+
+	writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl);
+
+	if (regs->emif_rd_wr_lvl_rmp_ctl & EMIF_REG_RDWRLVL_EN_MASK) {
+		/*
+		 * Perform Dummy ECC setup just to allow hardware
+		 * leveling of ECC memories
+		 */
+		if (is_dra76x() && (base == EMIF1_BASE) &&
+		    (regs->emif_ecc_ctrl_reg & EMIF_ECC_CTRL_REG_ECC_EN_MASK)) {
+			writel(0, &emif->emif_ecc_address_range_1);
+			writel(0, &emif->emif_ecc_address_range_2);
+			writel(EMIF_ECC_CTRL_REG_ECC_EN_MASK |
+			       EMIF_ECC_CTRL_REG_ECC_ADDR_RGN_PROT_MASK,
+			       &emif->emif_ecc_ctrl_reg);
+		}
+
+		dra7_ddr3_leveling(base, regs);
+
+		/* Disable ECC */
+		if (is_dra76x())
+			writel(0, &emif->emif_ecc_ctrl_reg);
+	}
+
+	/* Enable ECC as necessary */
+	dra7_enable_ecc(base, regs);
+}
+
+static void omap5_ddr3_init(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
+	writel(regs->sdram_config_init, &emif->emif_sdram_config);
+	/*
+	 * Set SDRAM_CONFIG and PHY control registers to locked frequency
+	 * and RL =7. As the default values of the Mode Registers are not
+	 * defined, contents of mode Registers must be fully initialized.
+	 * H/W takes care of this initialization
+	 */
+	writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
+
+	/* Update timing registers */
+	writel(regs->sdram_tim1, &emif->emif_sdram_tim_1);
+	writel(regs->sdram_tim2, &emif->emif_sdram_tim_2);
+	writel(regs->sdram_tim3, &emif->emif_sdram_tim_3);
+
+	writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
+
+	writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
+	writel(regs->sdram_config_init, &emif->emif_sdram_config);
+	do_ext_phy_settings(base, regs);
+
+	writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
+	omap5_ddr3_leveling(base, regs);
+}
+
+static void ddr3_init(u32 base, const struct emif_regs *regs)
+{
+	if (is_omap54xx())
+		omap5_ddr3_init(base, regs);
+	else
+		dra7_ddr3_init(base, regs);
+}
+#endif
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+
+/*
+ * Organization and refresh requirements for LPDDR2 devices of different
+ * types and densities. Derived from JESD209-2 section 2.4
+ */
+const struct lpddr2_addressing addressing_table[] = {
+	/* Banks tREFIx10     rowx32,rowx16      colx32,colx16	density */
+	{BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */
+	{BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */
+	{BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */
+	{BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */
+	{BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */
+	{BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */
+	{BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */
+	{BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */
+	{BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */
+	{BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */
+};
+
+static const u32 lpddr2_density_2_size_in_mbytes[] = {
+	8,			/* 64Mb */
+	16,			/* 128Mb */
+	32,			/* 256Mb */
+	64,			/* 512Mb */
+	128,			/* 1Gb   */
+	256,			/* 2Gb   */
+	512,			/* 4Gb   */
+	1024,			/* 8Gb   */
+	2048,			/* 16Gb  */
+	4096			/* 32Gb  */
+};
+
+/*
+ * Calculate the period of DDR clock from frequency value and set the
+ * denominator and numerator in global variables for easy access later
+ */
+static void set_ddr_clk_period(u32 freq)
+{
+	/*
+	 * period = 1/freq
+	 * period_in_ns = 10^9/freq
+	 */
+	*T_num = 1000000000;
+	*T_den = freq;
+	cancel_out(T_num, T_den, 200);
+
+}
+
+/*
+ * Convert time in nano seconds to number of cycles of DDR clock
+ */
+static inline u32 ns_2_cycles(u32 ns)
+{
+	return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num);
+}
+
+/*
+ * ns_2_cycles with the difference that the time passed is 2 times the actual
+ * value(to avoid fractions). The cycles returned is for the original value of
+ * the timing parameter
+ */
+static inline u32 ns_x2_2_cycles(u32 ns)
+{
+	return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2);
+}
+
+/*
+ * Find addressing table index based on the device's type(S2 or S4) and
+ * density
+ */
+s8 addressing_table_index(u8 type, u8 density, u8 width)
+{
+	u8 index;
+	if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8))
+		return -1;
+
+	/*
+	 * Look at the way ADDR_TABLE_INDEX* values have been defined
+	 * in emif.h compared to LPDDR2_DENSITY_* values
+	 * The table is layed out in the increasing order of density
+	 * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed
+	 * at the end
+	 */
+	if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb))
+		index = ADDR_TABLE_INDEX1GS2;
+	else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb))
+		index = ADDR_TABLE_INDEX2GS2;
+	else
+		index = density;
+
+	debug("emif: addressing table index %d\n", index);
+
+	return index;
+}
+
+/*
+ * Find the the right timing table from the array of timing
+ * tables of the device using DDR clock frequency
+ */
+static const struct lpddr2_ac_timings *get_timings_table(const struct
+			lpddr2_ac_timings *const *device_timings,
+			u32 freq)
+{
+	u32 i, temp, freq_nearest;
+	const struct lpddr2_ac_timings *timings = 0;
+
+	emif_assert(freq <= MAX_LPDDR2_FREQ);
+	emif_assert(device_timings);
+
+	/*
+	 * Start with the maximum allowed frequency - that is always safe
+	 */
+	freq_nearest = MAX_LPDDR2_FREQ;
+	/*
+	 * Find the timings table that has the max frequency value:
+	 *   i.  Above or equal to the DDR frequency - safe
+	 *   ii. The lowest that satisfies condition (i) - optimal
+	 */
+	for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) {
+		temp = device_timings[i]->max_freq;
+		if ((temp >= freq) && (temp <= freq_nearest)) {
+			freq_nearest = temp;
+			timings = device_timings[i];
+		}
+	}
+	debug("emif: timings table: %d\n", freq_nearest);
+	return timings;
+}
+
+/*
+ * Finds the value of emif_sdram_config_reg
+ * All parameters are programmed based on the device on CS0.
+ * If there is a device on CS1, it will be same as that on CS0 or
+ * it will be NVM. We don't support NVM yet.
+ * If cs1_device pointer is NULL it is assumed that there is no device
+ * on CS1
+ */
+static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device,
+				const struct lpddr2_device_details *cs1_device,
+				const struct lpddr2_addressing *addressing,
+				u8 RL)
+{
+	u32 config_reg = 0;
+
+	config_reg |=  (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT;
+	config_reg |=  EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING <<
+			EMIF_REG_IBANK_POS_SHIFT;
+
+	config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT;
+
+	config_reg |= RL << EMIF_REG_CL_SHIFT;
+
+	config_reg |= addressing->row_sz[cs0_device->io_width] <<
+			EMIF_REG_ROWSIZE_SHIFT;
+
+	config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT;
+
+	config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) <<
+			EMIF_REG_EBANK_SHIFT;
+
+	config_reg |= addressing->col_sz[cs0_device->io_width] <<
+			EMIF_REG_PAGESIZE_SHIFT;
+
+	return config_reg;
+}
+
+static u32 get_sdram_ref_ctrl(u32 freq,
+			      const struct lpddr2_addressing *addressing)
+{
+	u32 ref_ctrl = 0, val = 0, freq_khz;
+	freq_khz = freq / 1000;
+	/*
+	 * refresh rate to be set is 'tREFI * freq in MHz
+	 * division by 10000 to account for khz and x10 in t_REFI_us_x10
+	 */
+	val = addressing->t_REFI_us_x10 * freq_khz / 10000;
+	ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT;
+
+	return ref_ctrl;
+}
+
+static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
+			       const struct lpddr2_min_tck *min_tck,
+			       const struct lpddr2_addressing *addressing)
+{
+	u32 tim1 = 0, val = 0;
+	val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1;
+	tim1 |= val << EMIF_REG_T_WTR_SHIFT;
+
+	if (addressing->num_banks == BANKS8)
+		val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) /
+							(4 * (*T_num)) - 1;
+	else
+		val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1;
+
+	tim1 |= val << EMIF_REG_T_RRD_SHIFT;
+
+	val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1;
+	tim1 |= val << EMIF_REG_T_RC_SHIFT;
+
+	val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1;
+	tim1 |= val << EMIF_REG_T_RAS_SHIFT;
+
+	val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1;
+	tim1 |= val << EMIF_REG_T_WR_SHIFT;
+
+	val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1;
+	tim1 |= val << EMIF_REG_T_RCD_SHIFT;
+
+	val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1;
+	tim1 |= val << EMIF_REG_T_RP_SHIFT;
+
+	return tim1;
+}
+
+static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings,
+			       const struct lpddr2_min_tck *min_tck)
+{
+	u32 tim2 = 0, val = 0;
+	val = max(min_tck->tCKE, timings->tCKE) - 1;
+	tim2 |= val << EMIF_REG_T_CKE_SHIFT;
+
+	val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1;
+	tim2 |= val << EMIF_REG_T_RTP_SHIFT;
+
+	/*
+	 * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the
+	 * same value
+	 */
+	val = ns_2_cycles(timings->tXSR) - 1;
+	tim2 |= val << EMIF_REG_T_XSRD_SHIFT;
+	tim2 |= val << EMIF_REG_T_XSNR_SHIFT;
+
+	val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1;
+	tim2 |= val << EMIF_REG_T_XP_SHIFT;
+
+	return tim2;
+}
+
+static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings,
+			       const struct lpddr2_min_tck *min_tck,
+			       const struct lpddr2_addressing *addressing)
+{
+	u32 tim3 = 0, val = 0;
+	val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF);
+	tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT;
+
+	val = ns_2_cycles(timings->tRFCab) - 1;
+	tim3 |= val << EMIF_REG_T_RFC_SHIFT;
+
+	val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1;
+	tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT;
+
+	val = ns_2_cycles(timings->tZQCS) - 1;
+	tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT;
+
+	val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1;
+	tim3 |= val << EMIF_REG_T_CKESR_SHIFT;
+
+	return tim3;
+}
+
+static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
+			     const struct lpddr2_addressing *addressing,
+			     u8 volt_ramp)
+{
+	u32 zq = 0, val = 0;
+	if (volt_ramp)
+		val =
+		    EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 /
+		    addressing->t_REFI_us_x10;
+	else
+		val =
+		    EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 /
+		    addressing->t_REFI_us_x10;
+	zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT;
+
+	zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT;
+
+	zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT;
+
+	zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT;
+
+	/*
+	 * Assuming that two chipselects have a single calibration resistor
+	 * If there are indeed two calibration resistors, then this flag should
+	 * be enabled to take advantage of dual calibration feature.
+	 * This data should ideally come from board files. But considering
+	 * that none of the boards today have calibration resistors per CS,
+	 * it would be an unnecessary overhead.
+	 */
+	zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT;
+
+	zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT;
+
+	zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT;
+
+	return zq;
+}
+
+static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device,
+				 const struct lpddr2_addressing *addressing,
+				 u8 is_derated)
+{
+	u32 alert = 0, interval;
+	interval =
+	    TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10;
+	if (is_derated)
+		interval *= 4;
+	alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT;
+
+	alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT;
+
+	alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT;
+
+	alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT;
+
+	alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT;
+
+	alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT;
+
+	return alert;
+}
+
+static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
+{
+	u32 idle = 0, val = 0;
+	if (volt_ramp)
+		val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1;
+	else
+		/*Maximum value in normal conditions - suggested by hw team */
+		val = 0x1FF;
+	idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT;
+
+	idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT;
+
+	return idle;
+}
+
+static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
+{
+	u32 phy = 0, val = 0;
+
+	phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT;
+
+	if (freq <= 100000000)
+		val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS;
+	else if (freq <= 200000000)
+		val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ;
+	else
+		val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ;
+	phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
+
+	/* Other fields are constant magic values. Hardcode them together */
+	phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL <<
+		EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
+
+	return phy;
+}
+
+static u32 get_emif_mem_size(u32 base)
+{
+	u32 size_mbytes = 0, temp;
+	struct emif_device_details dev_details;
+	struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
+	u32 emif_nr = emif_num(base);
+
+	emif_reset_phy(base);
+	dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0,
+						&cs0_dev_details);
+	dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1,
+						&cs1_dev_details);
+	emif_reset_phy(base);
+
+	if (dev_details.cs0_device_details) {
+		temp = dev_details.cs0_device_details->density;
+		size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
+	}
+
+	if (dev_details.cs1_device_details) {
+		temp = dev_details.cs1_device_details->density;
+		size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
+	}
+	/* convert to bytes */
+	return size_mbytes << 20;
+}
+
+/* Gets the encoding corresponding to a given DMM section size */
+u32 get_dmm_section_size_map(u32 section_size)
+{
+	/*
+	 * Section size mapping:
+	 * 0x0: 16-MiB section
+	 * 0x1: 32-MiB section
+	 * 0x2: 64-MiB section
+	 * 0x3: 128-MiB section
+	 * 0x4: 256-MiB section
+	 * 0x5: 512-MiB section
+	 * 0x6: 1-GiB section
+	 * 0x7: 2-GiB section
+	 */
+	section_size >>= 24; /* divide by 16 MB */
+	return log_2_n_round_down(section_size);
+}
+
+static void emif_calculate_regs(
+		const struct emif_device_details *emif_dev_details,
+		u32 freq, struct emif_regs *regs)
+{
+	u32 temp, sys_freq;
+	const struct lpddr2_addressing *addressing;
+	const struct lpddr2_ac_timings *timings;
+	const struct lpddr2_min_tck *min_tck;
+	const struct lpddr2_device_details *cs0_dev_details =
+					emif_dev_details->cs0_device_details;
+	const struct lpddr2_device_details *cs1_dev_details =
+					emif_dev_details->cs1_device_details;
+	const struct lpddr2_device_timings *cs0_dev_timings =
+					emif_dev_details->cs0_device_timings;
+
+	emif_assert(emif_dev_details);
+	emif_assert(regs);
+	/*
+	 * You can not have a device on CS1 without one on CS0
+	 * So configuring EMIF without a device on CS0 doesn't
+	 * make sense
+	 */
+	emif_assert(cs0_dev_details);
+	emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM);
+	/*
+	 * If there is a device on CS1 it should be same type as CS0
+	 * (or NVM. But NVM is not supported in this driver yet)
+	 */
+	emif_assert((cs1_dev_details == NULL) ||
+		    (cs1_dev_details->type == LPDDR2_TYPE_NVM) ||
+		    (cs0_dev_details->type == cs1_dev_details->type));
+	emif_assert(freq <= MAX_LPDDR2_FREQ);
+
+	set_ddr_clk_period(freq);
+
+	/*
+	 * The device on CS0 is used for all timing calculations
+	 * There is only one set of registers for timings per EMIF. So, if the
+	 * second CS(CS1) has a device, it should have the same timings as the
+	 * device on CS0
+	 */
+	timings = get_timings_table(cs0_dev_timings->ac_timings, freq);
+	emif_assert(timings);
+	min_tck = cs0_dev_timings->min_tck;
+
+	temp = addressing_table_index(cs0_dev_details->type,
+				      cs0_dev_details->density,
+				      cs0_dev_details->io_width);
+
+	emif_assert((temp >= 0));
+	addressing = &(addressing_table[temp]);
+	emif_assert(addressing);
+
+	sys_freq = get_sys_clk_freq();
+
+	regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details,
+							cs1_dev_details,
+							addressing, RL_BOOT);
+
+	regs->sdram_config = get_sdram_config_reg(cs0_dev_details,
+						cs1_dev_details,
+						addressing, RL_FINAL);
+
+	regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing);
+
+	regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing);
+
+	regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck);
+
+	regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing);
+
+	regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE);
+
+	regs->temp_alert_config =
+	    get_temp_alert_config(cs1_dev_details, addressing, 0);
+
+	regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing,
+					    LPDDR2_VOLTAGE_STABLE);
+
+	regs->emif_ddr_phy_ctlr_1_init =
+			get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT);
+
+	regs->emif_ddr_phy_ctlr_1 =
+			get_ddr_phy_ctrl_1(freq, RL_FINAL);
+
+	regs->freq = freq;
+
+	print_timing_reg(regs->sdram_config_init);
+	print_timing_reg(regs->sdram_config);
+	print_timing_reg(regs->ref_ctrl);
+	print_timing_reg(regs->sdram_tim1);
+	print_timing_reg(regs->sdram_tim2);
+	print_timing_reg(regs->sdram_tim3);
+	print_timing_reg(regs->read_idle_ctrl);
+	print_timing_reg(regs->temp_alert_config);
+	print_timing_reg(regs->zq_config);
+	print_timing_reg(regs->emif_ddr_phy_ctlr_1);
+	print_timing_reg(regs->emif_ddr_phy_ctlr_1_init);
+}
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+const char *get_lpddr2_type(u8 type_id)
+{
+	switch (type_id) {
+	case LPDDR2_TYPE_S4:
+		return "LPDDR2-S4";
+	case LPDDR2_TYPE_S2:
+		return "LPDDR2-S2";
+	default:
+		return NULL;
+	}
+}
+
+const char *get_lpddr2_io_width(u8 width_id)
+{
+	switch (width_id) {
+	case LPDDR2_IO_WIDTH_8:
+		return "x8";
+	case LPDDR2_IO_WIDTH_16:
+		return "x16";
+	case LPDDR2_IO_WIDTH_32:
+		return "x32";
+	default:
+		return NULL;
+	}
+}
+
+const char *get_lpddr2_manufacturer(u32 manufacturer)
+{
+	switch (manufacturer) {
+	case LPDDR2_MANUFACTURER_SAMSUNG:
+		return "Samsung";
+	case LPDDR2_MANUFACTURER_QIMONDA:
+		return "Qimonda";
+	case LPDDR2_MANUFACTURER_ELPIDA:
+		return "Elpida";
+	case LPDDR2_MANUFACTURER_ETRON:
+		return "Etron";
+	case LPDDR2_MANUFACTURER_NANYA:
+		return "Nanya";
+	case LPDDR2_MANUFACTURER_HYNIX:
+		return "Hynix";
+	case LPDDR2_MANUFACTURER_MOSEL:
+		return "Mosel";
+	case LPDDR2_MANUFACTURER_WINBOND:
+		return "Winbond";
+	case LPDDR2_MANUFACTURER_ESMT:
+		return "ESMT";
+	case LPDDR2_MANUFACTURER_SPANSION:
+		return "Spansion";
+	case LPDDR2_MANUFACTURER_SST:
+		return "SST";
+	case LPDDR2_MANUFACTURER_ZMOS:
+		return "ZMOS";
+	case LPDDR2_MANUFACTURER_INTEL:
+		return "Intel";
+	case LPDDR2_MANUFACTURER_NUMONYX:
+		return "Numonyx";
+	case LPDDR2_MANUFACTURER_MICRON:
+		return "Micron";
+	default:
+		return NULL;
+	}
+}
+
+static void display_sdram_details(u32 emif_nr, u32 cs,
+				  struct lpddr2_device_details *device)
+{
+	const char *mfg_str;
+	const char *type_str;
+	char density_str[10];
+	u32 density;
+
+	debug("EMIF%d CS%d\t", emif_nr, cs);
+
+	if (!device) {
+		debug("None\n");
+		return;
+	}
+
+	mfg_str = get_lpddr2_manufacturer(device->manufacturer);
+	type_str = get_lpddr2_type(device->type);
+
+	density = lpddr2_density_2_size_in_mbytes[device->density];
+	if ((density / 1024 * 1024) == density) {
+		density /= 1024;
+		sprintf(density_str, "%d GB", density);
+	} else
+		sprintf(density_str, "%d MB", density);
+	if (mfg_str && type_str)
+		debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str);
+}
+
+static u8 is_lpddr2_sdram_present(u32 base, u32 cs,
+				  struct lpddr2_device_details *lpddr2_device)
+{
+	u32 mr = 0, temp;
+
+	mr = get_mr(base, cs, LPDDR2_MR0);
+	if (mr > 0xFF) {
+		/* Mode register value bigger than 8 bit */
+		return 0;
+	}
+
+	temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT;
+	if (temp) {
+		/* Not SDRAM */
+		return 0;
+	}
+	temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT;
+
+	if (temp) {
+		/* DNV supported - But DNV is only supported for NVM */
+		return 0;
+	}
+
+	mr = get_mr(base, cs, LPDDR2_MR4);
+	if (mr > 0xFF) {
+		/* Mode register value bigger than 8 bit */
+		return 0;
+	}
+
+	mr = get_mr(base, cs, LPDDR2_MR5);
+	if (mr > 0xFF) {
+		/* Mode register value bigger than 8 bit */
+		return 0;
+	}
+
+	if (!get_lpddr2_manufacturer(mr)) {
+		/* Manufacturer not identified */
+		return 0;
+	}
+	lpddr2_device->manufacturer = mr;
+
+	mr = get_mr(base, cs, LPDDR2_MR6);
+	if (mr >= 0xFF) {
+		/* Mode register value bigger than 8 bit */
+		return 0;
+	}
+
+	mr = get_mr(base, cs, LPDDR2_MR7);
+	if (mr >= 0xFF) {
+		/* Mode register value bigger than 8 bit */
+		return 0;
+	}
+
+	mr = get_mr(base, cs, LPDDR2_MR8);
+	if (mr >= 0xFF) {
+		/* Mode register value bigger than 8 bit */
+		return 0;
+	}
+
+	temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT;
+	if (!get_lpddr2_type(temp)) {
+		/* Not SDRAM */
+		return 0;
+	}
+	lpddr2_device->type = temp;
+
+	temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT;
+	if (temp > LPDDR2_DENSITY_32Gb) {
+		/* Density not supported */
+		return 0;
+	}
+	lpddr2_device->density = temp;
+
+	temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT;
+	if (!get_lpddr2_io_width(temp)) {
+		/* IO width unsupported value */
+		return 0;
+	}
+	lpddr2_device->io_width = temp;
+
+	/*
+	 * If all the above tests pass we should
+	 * have a device on this chip-select
+	 */
+	return 1;
+}
+
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+			struct lpddr2_device_details *lpddr2_dev_details)
+{
+	u32 phy;
+	u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE;
+
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	if (!lpddr2_dev_details)
+		return NULL;
+
+	/* Do the minimum init for mode register accesses */
+	if (!(running_from_sdram() || warm_reset())) {
+		phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT);
+		writel(phy, &emif->emif_ddr_phy_ctrl_1);
+	}
+
+	if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details)))
+		return NULL;
+
+	display_sdram_details(emif_num(base), cs, lpddr2_dev_details);
+
+	return lpddr2_dev_details;
+}
+#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */
+
+static void do_sdram_init(u32 base)
+{
+	const struct emif_regs *regs;
+	u32 in_sdram, emif_nr;
+
+	debug(">>do_sdram_init() %x\n", base);
+
+	in_sdram = running_from_sdram();
+	emif_nr = (base == EMIF1_BASE) ? 1 : 2;
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+	emif_get_reg_dump(emif_nr, &regs);
+	if (!regs) {
+		debug("EMIF: reg dump not provided\n");
+		return;
+	}
+#else
+	/*
+	 * The user has not provided the register values. We need to
+	 * calculate it based on the timings and the DDR frequency
+	 */
+	struct emif_device_details dev_details;
+	struct emif_regs calculated_regs;
+
+	/*
+	 * Get device details:
+	 * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set
+	 * - Obtained from user otherwise
+	 */
+	struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
+	emif_reset_phy(base);
+	dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0,
+						&cs0_dev_details);
+	dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1,
+						&cs1_dev_details);
+	emif_reset_phy(base);
+
+	/* Return if no devices on this EMIF */
+	if (!dev_details.cs0_device_details &&
+	    !dev_details.cs1_device_details) {
+		return;
+	}
+
+	/*
+	 * Get device timings:
+	 * - Default timings specified by JESD209-2 if
+	 *   CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set
+	 * - Obtained from user otherwise
+	 */
+	emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings,
+				&dev_details.cs1_device_timings);
+
+	/* Calculate the register values */
+	emif_calculate_regs(&dev_details, omap_ddr_clk(), &calculated_regs);
+	regs = &calculated_regs;
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+	/*
+	 * Initializing the DDR device can not happen from SDRAM.
+	 * Changing the timing registers in EMIF can happen(going from one
+	 * OPP to another)
+	 */
+	if (!in_sdram && (!warm_reset() || is_dra7xx())) {
+		if (emif_sdram_type(regs->sdram_config) ==
+		    EMIF_SDRAM_TYPE_LPDDR2)
+			lpddr2_init(base, regs);
+#ifndef CONFIG_OMAP44XX
+		else
+			ddr3_init(base, regs);
+#endif
+	}
+#ifdef CONFIG_OMAP54XX
+	if (warm_reset() && (emif_sdram_type(regs->sdram_config) ==
+	    EMIF_SDRAM_TYPE_DDR3) && !is_dra7xx()) {
+		set_lpmode_selfrefresh(base);
+		emif_reset_phy(base);
+		omap5_ddr3_leveling(base, regs);
+	}
+#endif
+
+	/* Write to the shadow registers */
+	emif_update_timings(base, regs);
+
+	debug("<<do_sdram_init() %x\n", base);
+}
+
+void emif_post_init_config(u32 base)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+	u32 omap_rev = omap_revision();
+
+	/* reset phy on ES2.0 */
+	if (omap_rev == OMAP4430_ES2_0)
+		emif_reset_phy(base);
+
+	/* Put EMIF back in smart idle on ES1.0 */
+	if (omap_rev == OMAP4430_ES1_0)
+		writel(0x80000000, &emif->emif_pwr_mgmt_ctrl);
+}
+
+void dmm_init(u32 base)
+{
+	const struct dmm_lisa_map_regs *lisa_map_regs;
+	u32 i, section, valid;
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+	emif_get_dmm_regs(&lisa_map_regs);
+#else
+	u32 emif1_size, emif2_size, mapped_size, section_map = 0;
+	u32 section_cnt, sys_addr;
+	struct dmm_lisa_map_regs lis_map_regs_calculated = {0};
+
+	mapped_size = 0;
+	section_cnt = 3;
+	sys_addr = CONFIG_SYS_SDRAM_BASE;
+	emif1_size = get_emif_mem_size(EMIF1_BASE);
+	emif2_size = get_emif_mem_size(EMIF2_BASE);
+	debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
+
+	if (!emif1_size && !emif2_size)
+		return;
+
+	/* symmetric interleaved section */
+	if (emif1_size && emif2_size) {
+		mapped_size = min(emif1_size, emif2_size);
+		section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL;
+		section_map |= 0 << EMIF_SDRC_ADDR_SHIFT;
+		/* only MSB */
+		section_map |= (sys_addr >> 24) <<
+				EMIF_SYS_ADDR_SHIFT;
+		section_map |= get_dmm_section_size_map(mapped_size * 2)
+				<< EMIF_SYS_SIZE_SHIFT;
+		lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
+		emif1_size -= mapped_size;
+		emif2_size -= mapped_size;
+		sys_addr += (mapped_size * 2);
+		section_cnt--;
+	}
+
+	/*
+	 * Single EMIF section(we can have a maximum of 1 single EMIF
+	 * section- either EMIF1 or EMIF2 or none, but not both)
+	 */
+	if (emif1_size) {
+		section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL;
+		section_map |= get_dmm_section_size_map(emif1_size)
+				<< EMIF_SYS_SIZE_SHIFT;
+		/* only MSB */
+		section_map |= (mapped_size >> 24) <<
+				EMIF_SDRC_ADDR_SHIFT;
+		/* only MSB */
+		section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT;
+		section_cnt--;
+	}
+	if (emif2_size) {
+		section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL;
+		section_map |= get_dmm_section_size_map(emif2_size) <<
+				EMIF_SYS_SIZE_SHIFT;
+		/* only MSB */
+		section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT;
+		/* only MSB */
+		section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT;
+		section_cnt--;
+	}
+
+	if (section_cnt == 2) {
+		/* Only 1 section - either symmetric or single EMIF */
+		lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
+		lis_map_regs_calculated.dmm_lisa_map_2 = 0;
+		lis_map_regs_calculated.dmm_lisa_map_1 = 0;
+	} else {
+		/* 2 sections - 1 symmetric, 1 single EMIF */
+		lis_map_regs_calculated.dmm_lisa_map_2 = section_map;
+		lis_map_regs_calculated.dmm_lisa_map_1 = 0;
+	}
+
+	/* TRAP for invalid TILER mappings in section 0 */
+	lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
+
+	if (omap_revision() >= OMAP4460_ES1_0)
+		lis_map_regs_calculated.is_ma_present = 1;
+
+	lisa_map_regs = &lis_map_regs_calculated;
+#endif
+	struct dmm_lisa_map_regs *hw_lisa_map_regs =
+	    (struct dmm_lisa_map_regs *)base;
+
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
+	writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
+
+	writel(lisa_map_regs->dmm_lisa_map_3,
+		&hw_lisa_map_regs->dmm_lisa_map_3);
+	writel(lisa_map_regs->dmm_lisa_map_2,
+		&hw_lisa_map_regs->dmm_lisa_map_2);
+	writel(lisa_map_regs->dmm_lisa_map_1,
+		&hw_lisa_map_regs->dmm_lisa_map_1);
+	writel(lisa_map_regs->dmm_lisa_map_0,
+		&hw_lisa_map_regs->dmm_lisa_map_0);
+
+	if (lisa_map_regs->is_ma_present) {
+		hw_lisa_map_regs =
+		    (struct dmm_lisa_map_regs *)MA_BASE;
+
+		writel(lisa_map_regs->dmm_lisa_map_3,
+			&hw_lisa_map_regs->dmm_lisa_map_3);
+		writel(lisa_map_regs->dmm_lisa_map_2,
+			&hw_lisa_map_regs->dmm_lisa_map_2);
+		writel(lisa_map_regs->dmm_lisa_map_1,
+			&hw_lisa_map_regs->dmm_lisa_map_1);
+		writel(lisa_map_regs->dmm_lisa_map_0,
+			&hw_lisa_map_regs->dmm_lisa_map_0);
+
+		setbits_le32(MA_PRIORITY, MA_HIMEM_INTERLEAVE_UN_MASK);
+	}
+
+	/*
+	 * EMIF should be configured only when
+	 * memory is mapped on it. Using emif1_enabled
+	 * and emif2_enabled variables for this.
+	 */
+	emif1_enabled = 0;
+	emif2_enabled = 0;
+	for (i = 0; i < 4; i++) {
+		section	= __raw_readl(DMM_BASE + i*4);
+		valid = (section & EMIF_SDRC_MAP_MASK) >>
+			(EMIF_SDRC_MAP_SHIFT);
+		if (valid == 3) {
+			emif1_enabled = 1;
+			emif2_enabled = 1;
+			break;
+		}
+
+		if (valid == 1)
+			emif1_enabled = 1;
+
+		if (valid == 2)
+			emif2_enabled = 1;
+	}
+}
+
+static void do_bug0039_workaround(u32 base)
+{
+	u32 val, i, clkctrl;
+	struct emif_reg_struct *emif_base = (struct emif_reg_struct *)base;
+	const struct read_write_regs *bug_00339_regs;
+	u32 iterations;
+	u32 *phy_status_base = &emif_base->emif_ddr_phy_status[0];
+	u32 *phy_ctrl_base = &emif_base->emif_ddr_ext_phy_ctrl_1;
+
+	if (is_dra7xx())
+		phy_status_base++;
+
+	bug_00339_regs = get_bug_regs(&iterations);
+
+	/* Put EMIF in to idle */
+	clkctrl = __raw_readl((*prcm)->cm_memif_clkstctrl);
+	__raw_writel(0x0, (*prcm)->cm_memif_clkstctrl);
+
+	/* Copy the phy status registers in to phy ctrl shadow registers */
+	for (i = 0; i < iterations; i++) {
+		val = __raw_readl(phy_status_base +
+				  bug_00339_regs[i].read_reg - 1);
+
+		__raw_writel(val, phy_ctrl_base +
+			     ((bug_00339_regs[i].write_reg - 1) << 1));
+
+		__raw_writel(val, phy_ctrl_base +
+			     (bug_00339_regs[i].write_reg << 1) - 1);
+	}
+
+	/* Disable leveling */
+	writel(0x0, &emif_base->emif_rd_wr_lvl_rmp_ctl);
+
+	__raw_writel(clkctrl,  (*prcm)->cm_memif_clkstctrl);
+}
+
+/*
+ * SDRAM initialization:
+ * SDRAM initialization has two parts:
+ * 1. Configuring the SDRAM device
+ * 2. Update the AC timings related parameters in the EMIF module
+ * (1) should be done only once and should not be done while we are
+ * running from SDRAM.
+ * (2) can and should be done more than once if OPP changes.
+ * Particularly, this may be needed when we boot without SPL and
+ * and using Configuration Header(CH). ROM code supports only at 50% OPP
+ * at boot (low power boot). So u-boot has to switch to OPP100 and update
+ * the frequency. So,
+ * Doing (1) and (2) makes sense - first time initialization
+ * Doing (2) and not (1) makes sense - OPP change (when using CH)
+ * Doing (1) and not (2) doen't make sense
+ * See do_sdram_init() for the details
+ */
+void sdram_init(void)
+{
+	u32 in_sdram, size_prog, size_detect;
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+	u32 sdram_type = emif_sdram_type(emif->emif_sdram_config);
+
+	debug(">>sdram_init()\n");
+
+	if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
+		return;
+
+	in_sdram = running_from_sdram();
+	debug("in_sdram = %d\n", in_sdram);
+
+	if (!in_sdram) {
+		if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset())
+			bypass_dpll((*prcm)->cm_clkmode_dpll_core);
+		else if (sdram_type == EMIF_SDRAM_TYPE_DDR3)
+			writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl);
+	}
+
+	if (!in_sdram)
+		dmm_init(DMM_BASE);
+
+	if (emif1_enabled)
+		do_sdram_init(EMIF1_BASE);
+
+	if (emif2_enabled)
+		do_sdram_init(EMIF2_BASE);
+
+	if (!(in_sdram || warm_reset())) {
+		if (emif1_enabled)
+			emif_post_init_config(EMIF1_BASE);
+		if (emif2_enabled)
+			emif_post_init_config(EMIF2_BASE);
+	}
+
+	/* for the shadow registers to take effect */
+	if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
+		freq_update_core();
+
+	/* Do some testing after the init */
+	if (!in_sdram) {
+		size_prog = omap_sdram_size();
+		size_prog = log_2_n_round_down(size_prog);
+		size_prog = (1 << size_prog);
+
+		size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+						size_prog);
+		/* Compare with the size programmed */
+		if (size_detect != size_prog) {
+			printf("SDRAM: identified size not same as expected"
+				" size identified: %x expected: %x\n",
+				size_detect,
+				size_prog);
+		} else
+			debug("get_ram_size() successful");
+	}
+
+#if defined(CONFIG_TI_SECURE_DEVICE)
+	/*
+	 * On HS devices, do static EMIF firewall configuration
+	 * but only do it if not already running in SDRAM
+	 */
+	if (!in_sdram)
+		if (0 != secure_emif_reserve())
+			hang();
+
+	/* On HS devices, ensure static EMIF firewall APIs are locked */
+	if (0 != secure_emif_firewall_lock())
+		hang();
+#endif
+
+	if (sdram_type == EMIF_SDRAM_TYPE_DDR3 &&
+	    (!in_sdram && !warm_reset()) && (!is_dra7xx())) {
+		if (emif1_enabled)
+			do_bug0039_workaround(EMIF1_BASE);
+		if (emif2_enabled)
+			do_bug0039_workaround(EMIF2_BASE);
+	}
+
+	debug("<<sdram_init()\n");
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/fdt-common.c b/roms/u-boot/arch/arm/mach-omap2/fdt-common.c
new file mode 100644
index 000000000..5eb044731
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/fdt-common.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016-2017 Texas Instruments, Inc.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+
+#include <asm/omap_common.h>
+#include <asm/omap_sec_common.h>
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+
+/* Give zero values if not already defined */
+#ifndef TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ
+#define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ (0)
+#endif
+#ifndef CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ
+#define CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ (0)
+#endif
+
+int ft_hs_disable_rng(void *fdt, struct bd_info *bd)
+{
+	const char *path;
+	int offs;
+	int ret;
+
+	/* Make HW RNG reserved for secure world use */
+	path = "/ocp/rng";
+	offs = fdt_path_offset(fdt, path);
+	if (offs < 0) {
+		debug("Node %s not found.\n", path);
+		return 0;
+	}
+	ret = fdt_setprop_string(fdt, offs,
+				 "status", "disabled");
+	if (ret < 0) {
+		printf("Could not add status property to node %s: %s\n",
+		       path, fdt_strerror(ret));
+		return ret;
+	}
+	return 0;
+}
+
+#if (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE != 0)
+/*
+ * fdt_pack_reg - pack address and size array into the "reg"-suitable stream
+ */
+static int fdt_pack_reg(const void *fdt, void *buf, u64 address, u64 size)
+{
+	int address_cells = fdt_address_cells(fdt, 0);
+	int size_cells = fdt_size_cells(fdt, 0);
+	char *p = buf;
+
+	if (address_cells == 2)
+		*(fdt64_t *)p = cpu_to_fdt64(address);
+	else
+		*(fdt32_t *)p = cpu_to_fdt32(address);
+	p += 4 * address_cells;
+
+	if (size_cells == 2)
+		*(fdt64_t *)p = cpu_to_fdt64(size);
+	else
+		*(fdt32_t *)p = cpu_to_fdt32(size);
+	p += 4 * size_cells;
+
+	return p - (char *)buf;
+}
+
+int ft_hs_fixup_dram(void *fdt, struct bd_info *bd)
+{
+	const char *path, *subpath;
+	int offs, len;
+	u32 sec_mem_start = get_sec_mem_start();
+	u32 sec_mem_size = CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE;
+	fdt32_t address_cells = cpu_to_fdt32(fdt_address_cells(fdt, 0));
+	fdt32_t size_cells = cpu_to_fdt32(fdt_size_cells(fdt, 0));
+	u8 temp[16]; /* Up to 64-bit address + 64-bit size */
+
+	/* Delete any original secure_reserved node */
+	path = "/reserved-memory/secure_reserved";
+	offs = fdt_path_offset(fdt, path);
+	if (offs >= 0)
+		fdt_del_node(fdt, offs);
+
+	/* Add new secure_reserved node */
+	path = "/reserved-memory";
+	offs = fdt_path_offset(fdt, path);
+	if (offs < 0) {
+		debug("Node %s not found\n", path);
+		path = "/";
+		subpath = "reserved-memory";
+		offs = fdt_path_offset(fdt, path);
+		offs = fdt_add_subnode(fdt, offs, subpath);
+		if (offs < 0) {
+			printf("Could not create %s%s node.\n", path, subpath);
+			return 1;
+		}
+		path = "/reserved-memory";
+		offs = fdt_path_offset(fdt, path);
+
+		fdt_setprop(fdt, offs, "#address-cells", &address_cells, sizeof(address_cells));
+		fdt_setprop(fdt, offs, "#size-cells", &size_cells, sizeof(size_cells));
+		fdt_setprop(fdt, offs, "ranges", NULL, 0);
+	}
+
+	subpath = "secure_reserved";
+	offs = fdt_add_subnode(fdt, offs, subpath);
+	if (offs < 0) {
+		printf("Could not create %s%s node.\n", path, subpath);
+		return 1;
+	}
+
+	fdt_setprop_string(fdt, offs, "compatible", "ti,secure-memory");
+	fdt_setprop_string(fdt, offs, "status", "okay");
+	fdt_setprop(fdt, offs, "no-map", NULL, 0);
+	len = fdt_pack_reg(fdt, temp, sec_mem_start, sec_mem_size);
+	fdt_setprop(fdt, offs, "reg", temp, len);
+
+	return 0;
+}
+#else
+int ft_hs_fixup_dram(void *fdt, struct bd_info *bd) { return 0; }
+#endif
+
+int ft_hs_add_tee(void *fdt, struct bd_info *bd)
+{
+	const char *path, *subpath;
+	int offs;
+
+	extern int tee_loaded;
+	if (!tee_loaded)
+		return 0;
+
+	path = "/firmware";
+	offs = fdt_path_offset(fdt, path);
+	if (offs < 0) {
+		path = "/";
+		offs = fdt_path_offset(fdt, path);
+		if (offs < 0) {
+			printf("Could not find root node.\n");
+			return 1;
+		}
+
+		subpath = "firmware";
+		offs = fdt_add_subnode(fdt, offs, subpath);
+		if (offs < 0) {
+			printf("Could not create %s node.\n", subpath);
+			return 1;
+		}
+	}
+
+	subpath = "optee";
+	offs = fdt_add_subnode(fdt, offs, subpath);
+	if (offs < 0) {
+		printf("Could not create %s node.\n", subpath);
+		return 1;
+	}
+
+	fdt_setprop_string(fdt, offs, "compatible", "linaro,optee-tz");
+	fdt_setprop_string(fdt, offs, "method", "smc");
+
+	return 0;
+}
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/hwinit-common.c b/roms/u-boot/arch/arm/mach-omap2/hwinit-common.c
new file mode 100644
index 000000000..3da50f974
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/hwinit-common.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Common functions for OMAP4/5 based boards
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ */
+#include <common.h>
+#include <debug_uart.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <spl.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <linux/sizes.h>
+#include <asm/emif.h>
+#include <asm/omap_common.h>
+#include <linux/compiler.h>
+#include <asm/system.h>
+#include <dm/root.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+{
+	int i;
+	struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+
+	for (i = 0; i < size; i++, pad++)
+		writew(pad->val, base + pad->offset);
+}
+
+static void set_mux_conf_regs(void)
+{
+	switch (omap_hw_init_context()) {
+	case OMAP_INIT_CONTEXT_SPL:
+		set_muxconf_regs();
+		break;
+	case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
+		break;
+	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
+	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
+		set_muxconf_regs();
+		break;
+	}
+}
+
+u32 cortex_rev(void)
+{
+
+	unsigned int rev;
+
+	/* Read Main ID Register (MIDR) */
+	asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));
+
+	return rev;
+}
+
+static void omap_rev_string(void)
+{
+	u32 omap_rev = omap_revision();
+	u32 soc_variant	= (omap_rev & 0xF0000000) >> 28;
+	u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
+	u32 major_rev = (omap_rev & 0x00000F00) >> 8;
+	u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
+
+	const char *sec_s, *package = NULL;
+
+	switch (get_device_type()) {
+	case TST_DEVICE:
+		sec_s = "TST";
+		break;
+	case EMU_DEVICE:
+		sec_s = "EMU";
+		break;
+	case HS_DEVICE:
+		sec_s = "HS";
+		break;
+	case GP_DEVICE:
+		sec_s = "GP";
+		break;
+	default:
+		sec_s = "?";
+	}
+
+#if defined(CONFIG_DRA7XX)
+	if (is_dra76x()) {
+		switch (omap_rev & 0xF) {
+		case DRA762_ABZ_PACKAGE:
+			package = "ABZ";
+			break;
+		case DRA762_ACD_PACKAGE:
+		default:
+			package = "ACD";
+			break;
+		}
+	}
+#endif
+
+	if (soc_variant)
+		printf("OMAP");
+	else
+		printf("DRA");
+	printf("%x-%s ES%x.%x", omap_variant, sec_s, major_rev, minor_rev);
+	if (package)
+		printf(" %s package\n", package);
+	else
+		puts("\n");
+}
+
+#ifdef CONFIG_SPL_BUILD
+void spl_display_print(void)
+{
+	omap_rev_string();
+}
+#endif
+
+void __weak srcomp_enable(void)
+{
+}
+
+/**
+ * do_board_detect() - Detect board description
+ *
+ * Function to detect board description. This is expected to be
+ * overridden in the SoC family board file where desired.
+ */
+void __weak do_board_detect(void)
+{
+}
+
+/**
+ * vcores_init() - Assign omap_vcores based on board
+ *
+ * Function to pick the vcores based on board. This is expected to be
+ * overridden in the SoC family board file where desired.
+ */
+void __weak vcores_init(void)
+{
+}
+
+void s_init(void)
+{
+}
+
+/**
+ * init_package_revision() - Initialize package revision
+ *
+ * Function to get the pacakage information. This is expected to be
+ * overridden in the SoC family file where desired.
+ */
+void __weak init_package_revision(void)
+{
+}
+
+/**
+ * early_system_init - Does Early system initialization.
+ *
+ * Does early system init of watchdog, muxing,  andclocks
+ * Watchdog disable is done always. For the rest what gets done
+ * depends on the boot mode in which this function is executed when
+ *   1. SPL running from SRAM
+ *   2. U-Boot running from FLASH
+ *   3. U-Boot loaded to SDRAM by SPL
+ *   4. U-Boot loaded to SDRAM by ROM code using the
+ *	Configuration Header feature
+ * Please have a look at the respective functions to see what gets
+ * done in each of these cases
+ * This function is called with SRAM stack.
+ */
+void early_system_init(void)
+{
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT)
+	int ret;
+	int rescan;
+#endif
+	init_omap_revision();
+	hw_data_init();
+	init_package_revision();
+
+#ifdef CONFIG_SPL_BUILD
+	if (warm_reset())
+		force_emif_self_refresh();
+#endif
+	watchdog_init();
+	set_mux_conf_regs();
+#ifdef CONFIG_SPL_BUILD
+	srcomp_enable();
+	do_io_settings();
+#endif
+	setup_early_clocks();
+
+#ifdef CONFIG_SPL_BUILD
+	/*
+	 * Save the boot parameters passed from romcode.
+	 * We cannot delay the saving further than this,
+	 * to prevent overwrites.
+	 */
+	save_omap_boot_params();
+	spl_early_init();
+#endif
+	do_board_detect();
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT)
+	/*
+	 * Board detection has been done.
+	 * Let us see if another dtb wouldn't be a better match
+	 * for our board
+	 */
+	ret = fdtdec_resetup(&rescan);
+	if (!ret && rescan) {
+		dm_uninit();
+		dm_init_and_scan(true);
+	}
+#endif
+
+	vcores_init();
+#ifdef CONFIG_DEBUG_UART_OMAP
+	debug_uart_init();
+#endif
+	prcm_init();
+}
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	early_system_init();
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+	board_early_init_f();
+#endif
+	/* For regular u-boot sdram_init() is called from dram_init() */
+	sdram_init();
+	gd->ram_size = omap_sdram_size();
+}
+#endif
+
+int arch_cpu_init_dm(void)
+{
+	early_system_init();
+	return 0;
+}
+
+/*
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ */
+void wait_for_command_complete(struct watchdog *wd_base)
+{
+	int pending = 1;
+	do {
+		pending = readl(&wd_base->wwps);
+	} while (pending);
+}
+
+/*
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ */
+void watchdog_init(void)
+{
+	struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE;
+
+	writel(WD_UNLOCK1, &wd2_base->wspr);
+	wait_for_command_complete(wd2_base);
+	writel(WD_UNLOCK2, &wd2_base->wspr);
+}
+
+
+/*
+ * This function finds the SDRAM size available in the system
+ * based on DMM section configurations
+ * This is needed because the size of memory installed may be
+ * different on different versions of the board
+ */
+u32 omap_sdram_size(void)
+{
+	u32 section, i, valid;
+	u64 sdram_start = 0, sdram_end = 0, addr,
+	    size, total_size = 0, trap_size = 0, trap_start = 0;
+
+	for (i = 0; i < 4; i++) {
+		section	= __raw_readl(DMM_BASE + i*4);
+		valid = (section & EMIF_SDRC_ADDRSPC_MASK) >>
+			(EMIF_SDRC_ADDRSPC_SHIFT);
+		addr = section & EMIF_SYS_ADDR_MASK;
+
+		/* See if the address is valid */
+		if ((addr >= TI_ARMV7_DRAM_ADDR_SPACE_START) &&
+		    (addr < TI_ARMV7_DRAM_ADDR_SPACE_END)) {
+			size = ((section & EMIF_SYS_SIZE_MASK) >>
+				   EMIF_SYS_SIZE_SHIFT);
+			size = 1 << size;
+			size *= SZ_16M;
+
+			if (valid != DMM_SDRC_ADDR_SPC_INVALID) {
+				if (!sdram_start || (addr < sdram_start))
+					sdram_start = addr;
+				if (!sdram_end || ((addr + size) > sdram_end))
+					sdram_end = addr + size;
+			} else {
+				trap_size = size;
+				trap_start = addr;
+			}
+		}
+	}
+
+	if ((trap_start >= sdram_start) && (trap_start < sdram_end))
+		total_size = (sdram_end - sdram_start) - (trap_size);
+	else
+		total_size = sdram_end - sdram_start;
+
+	return total_size;
+}
+
+
+/*
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+	sdram_init();
+	gd->ram_size = omap_sdram_size();
+	return 0;
+}
+
+/*
+ * Print board information
+ */
+int checkboard(void)
+{
+	puts(sysinfo.board_string);
+	return 0;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+/*
+ * Print CPU information
+ */
+int print_cpuinfo(void)
+{
+	puts("CPU  : ");
+	omap_rev_string();
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/lowlevel_init.S b/roms/u-boot/arch/arm/mach-omap2/lowlevel_init.S
new file mode 100644
index 000000000..1a55295f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/lowlevel_init.S
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ */
+
+#include <config.h>
+#include <asm/arch/omap.h>
+#include <asm/omap_common.h>
+#include <asm/arch/spl.h>
+#include <linux/linkage.h>
+
+.arch_extension sec
+
+#ifdef CONFIG_SPL
+ENTRY(save_boot_params)
+	ldr	r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
+	str	r0, [r1]
+	b	save_boot_params_ret
+ENDPROC(save_boot_params)
+
+#if !defined(CONFIG_TI_SECURE_DEVICE) && defined(CONFIG_ARMV7_LPAE)
+ENTRY(switch_to_hypervisor)
+
+/*
+ * Switch to hypervisor mode
+ */
+	adr	r0, save_sp
+	str	sp, [r0]
+	adr	r1, restore_from_hyp
+	ldr	r0, =0x102
+	b	omap_smc1
+restore_from_hyp:
+	adr	r0, save_sp
+	ldr	sp, [r0]
+	MRC p15, 4, R0, c1, c0, 0
+	ldr     r1, =0X1004	@Set cache enable bits for hypervisor mode
+	orr     r0, r0, r1
+	MCR p15, 4, R0, c1, c0, 0
+	b	switch_to_hypervisor_ret
+save_sp:
+	.word	0x0
+ENDPROC(switch_to_hypervisor)
+#endif
+#endif
+
+ENTRY(omap_smc1)
+	push	{r4-r12, lr}	@ save registers - ROM code may pollute
+				@ our registers
+	mov	r12, r0		@ Service
+	mov	r0, r1		@ Argument
+
+	dsb
+	dmb
+	smc	0		@ SMC #0 to enter monitor mode
+				@ call ROM Code API for the service requested
+	pop	{r4-r12, pc}
+ENDPROC(omap_smc1)
+
+ENTRY(omap_smc_sec)
+	push	{r4-r12, lr}	@ save registers - ROM code may pollute
+				@ our registers
+	mov	r6, #0xFF	@ Indicate new Task call
+	mov	r12, #0x00	@ Secure Service ID in R12
+
+	dsb
+	dmb
+	smc	0		@ SMC #0 to enter monitor mode
+
+	b	omap_smc_sec_end @ exit at end of the service execution
+	nop
+
+	@ In case of IRQ happening in Secure, then ARM will branch here.
+	@ At that moment, IRQ will be pending and ARM will jump to Non Secure
+	@ IRQ handler
+	mov	r12, #0xFE
+
+	dsb
+	dmb
+	smc	0		@ SMC #0 to enter monitor mode
+
+omap_smc_sec_end:
+	pop	{r4-r12, pc}
+ENDPROC(omap_smc_sec)
diff --git a/roms/u-boot/arch/arm/mach-omap2/mem-common.c b/roms/u-boot/arch/arm/mach-omap2/mem-common.c
new file mode 100644
index 000000000..50d5f3e9e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/mem-common.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *     Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * Initial Code from:
+ *     Manikandan Pillai <mani.pillai@ti.com>
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Syed Mohammed Khasim <khasim@ti.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <command.h>
+#include <linux/mtd/omap_gpmc.h>
+#include <jffs2/load_kernel.h>
+
+const struct gpmc *gpmc_cfg = (struct gpmc *)GPMC_BASE;
+
+#if defined(CONFIG_NOR)
+char gpmc_cs0_flash = MTD_DEV_TYPE_NOR;
+#elif defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_CMD_NAND)
+char gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
+#elif defined(CONFIG_CMD_ONENAND)
+char gpmc_cs0_flash = MTD_DEV_TYPE_ONENAND;
+#else
+char gpmc_cs0_flash = -1;
+#endif
+
+#if defined(CONFIG_OMAP34XX)
+/********************************************************
+ *  mem_ok() - test used to see if timings are correct
+ *             for a part. Helps in guessing which part
+ *             we are currently using.
+ *******************************************************/
+u32 mem_ok(u32 cs)
+{
+	u32 val1, val2, addr;
+	u32 pattern = 0x12345678;
+
+	addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
+
+	writel(0x0, addr + 0x400);	/* clear pos A */
+	writel(pattern, addr);		/* pattern to pos B */
+	writel(0x0, addr + 4);		/* remove pattern off the bus */
+	val1 = readl(addr + 0x400);	/* get pos A value */
+	val2 = readl(addr);		/* get val2 */
+	writel(0x0, addr + 0x400);	/* clear pos A */
+
+	if ((val1 != 0) || (val2 != pattern))	/* see if pos A val changed */
+		return 0;
+	else
+		return 1;
+}
+#endif
+
+void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
+				u32 base, u32 size)
+{
+	writel(0, &cs->config7);
+	sdelay(1000);
+	/* Delay for settling */
+	writel(gpmc_config[0], &cs->config1);
+	writel(gpmc_config[1], &cs->config2);
+	writel(gpmc_config[2], &cs->config3);
+	writel(gpmc_config[3], &cs->config4);
+	writel(gpmc_config[4], &cs->config5);
+	writel(gpmc_config[5], &cs->config6);
+	/* Enable the config */
+	writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
+		(1 << 6)), &cs->config7);
+	sdelay(2000);
+}
+
+void set_gpmc_cs0(int flash_type)
+{
+	const u32 *gpmc_regs;
+	u32 base, size;
+#if defined(CONFIG_NOR)
+	const u32 gpmc_regs_nor[GPMC_MAX_REG] = {
+		STNOR_GPMC_CONFIG1,
+		STNOR_GPMC_CONFIG2,
+		STNOR_GPMC_CONFIG3,
+		STNOR_GPMC_CONFIG4,
+		STNOR_GPMC_CONFIG5,
+		STNOR_GPMC_CONFIG6,
+		STNOR_GPMC_CONFIG7
+	};
+#endif
+#if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_CMD_NAND)
+	const u32 gpmc_regs_nand[GPMC_MAX_REG] = {
+		M_NAND_GPMC_CONFIG1,
+		M_NAND_GPMC_CONFIG2,
+		M_NAND_GPMC_CONFIG3,
+		M_NAND_GPMC_CONFIG4,
+		M_NAND_GPMC_CONFIG5,
+		M_NAND_GPMC_CONFIG6,
+		0
+	};
+#endif
+#if defined(CONFIG_CMD_ONENAND)
+	const u32 gpmc_regs_onenand[GPMC_MAX_REG] = {
+		ONENAND_GPMC_CONFIG1,
+		ONENAND_GPMC_CONFIG2,
+		ONENAND_GPMC_CONFIG3,
+		ONENAND_GPMC_CONFIG4,
+		ONENAND_GPMC_CONFIG5,
+		ONENAND_GPMC_CONFIG6,
+		0
+	};
+#endif
+
+	switch (flash_type) {
+#if defined(CONFIG_NOR)
+	case MTD_DEV_TYPE_NOR:
+		gpmc_regs = gpmc_regs_nor;
+		base = CONFIG_SYS_FLASH_BASE;
+		size = (CONFIG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M :
+		      ((CONFIG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M :
+		      ((CONFIG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M  :
+		      ((CONFIG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M  :
+		                                              GPMC_SIZE_16M)));
+		break;
+#endif
+#if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_CMD_NAND)
+	case MTD_DEV_TYPE_NAND:
+		gpmc_regs = gpmc_regs_nand;
+		base = CONFIG_SYS_NAND_BASE;
+		size = GPMC_SIZE_16M;
+		break;
+#endif
+#if defined(CONFIG_CMD_ONENAND)
+	case MTD_DEV_TYPE_ONENAND:
+		gpmc_regs = gpmc_regs_onenand;
+		base = CONFIG_SYS_ONENAND_BASE;
+		size = GPMC_SIZE_128M;
+		break;
+#endif
+	default:
+		/* disable the GPMC0 config set by ROM code */
+		writel(0, &gpmc_cfg->cs[0].config7);
+		sdelay(1000);
+		return;
+	}
+
+	/* enable chip-select specific configurations */
+	enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
+}
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+	/* global settings */
+	writel(0x00000008, &gpmc_cfg->sysconfig);
+	writel(0x00000000, &gpmc_cfg->irqstatus);
+	writel(0x00000000, &gpmc_cfg->irqenable);
+	/* disable timeout, set a safe reset value */
+	writel(0x00001ff0, &gpmc_cfg->timeout_control);
+	writel(gpmc_cs0_flash == MTD_DEV_TYPE_NOR ?
+		0x00000200 : 0x00000012, &gpmc_cfg->config);
+
+	set_gpmc_cs0(gpmc_cs0_flash);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap-cache.c b/roms/u-boot/arch/arm/mach-omap2/omap-cache.c
new file mode 100644
index 000000000..36db58824
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap-cache.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Common functions for OMAP4/5 based boards
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Without LPAE short descriptors are used
+ * Set C - Cache Bit3
+ * Set B - Buffer Bit2
+ * The last 2 bits set to 0b10
+ * Do Not set XN bit4
+ * So value is 0xe
+ *
+ * With LPAE cache configuration happens via MAIR0 register
+ * AttrIndx value is 0x3 for picking byte3 for MAIR0 which has 0xFF.
+ * 0xFF maps to Cache writeback with Read and Write Allocate set
+ * The bits[1:0] should have the value 0b01 for the first level
+ * descriptor.
+ * So the value is 0xd
+ */
+
+#ifdef CONFIG_ARMV7_LPAE
+#define ARMV7_DCACHE_POLICY	DCACHE_WRITEALLOC
+#else
+#define ARMV7_DCACHE_POLICY	DCACHE_WRITEBACK & ~TTB_SECT_XN_MASK
+#endif
+
+void enable_caches(void)
+{
+
+	/* Enable I cache if not enabled */
+	if (!icache_status())
+		icache_enable();
+
+	dcache_enable();
+}
+
+void dram_bank_mmu_setup(int bank)
+{
+	struct bd_info *bd = gd->bd;
+	int	i;
+
+	u32 start = bd->bi_dram[bank].start >> MMU_SECTION_SHIFT;
+	u32 size = bd->bi_dram[bank].size >> MMU_SECTION_SHIFT;
+	u32 end = start + size;
+
+	debug("%s: bank: %d\n", __func__, bank);
+	for (i = start; i < end; i++)
+		set_section_dcache(i, ARMV7_DCACHE_POLICY);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/Kconfig b/roms/u-boot/arch/arm/mach-omap2/omap3/Kconfig
new file mode 100644
index 000000000..81c898b66
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/Kconfig
@@ -0,0 +1,166 @@
+if OMAP34XX
+
+# We only enable the clocks for the GPIO banks that a given board requies.
+config OMAP3_GPIO_2
+	bool
+	default y if CMD_GPIO
+
+config OMAP3_GPIO_3
+	bool
+	default y if CMD_GPIO
+
+config OMAP3_GPIO_4
+	bool
+	default y if CMD_GPIO
+
+config OMAP3_GPIO_5
+	bool
+	default y if CMD_GPIO
+
+config OMAP3_GPIO_6
+	bool
+	default y if CMD_GPIO
+
+choice
+	prompt "OMAP3 board select"
+	optional
+
+config TARGET_AM3517_EVM
+	bool "AM3517 EVM"
+	select DM
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_OMAP3_BEAGLE
+	bool "TI OMAP3 BeagleBoard"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select OMAP3_GPIO_5
+	select OMAP3_GPIO_6
+	imply CMD_DM
+
+config TARGET_CM_T35
+	bool "CompuLab CM-T3530 and CM-T3730 boards"
+	select OMAP3_GPIO_2
+	select OMAP3_GPIO_5
+	select OMAP3_GPIO_6 if LED_STATUS
+
+config TARGET_DEVKIT8000
+	bool "TimLL OMAP3 Devkit8000"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_OMAP3_EVM
+	bool "TI OMAP3 EVM"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select OMAP3_GPIO_2
+	select OMAP3_GPIO_3
+	select OMAP3_GPIO_5
+	select OMAP3_GPIO_6
+	imply CMD_DM
+
+config TARGET_OMAP3_IGEP00X0
+	bool "IGEP"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select OMAP3_GPIO_3
+	select OMAP3_GPIO_5
+	select OMAP3_GPIO_6
+	imply CMD_DM
+
+config TARGET_OMAP3_OVERO
+	bool "OMAP35xx Gumstix Overo"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select OMAP3_GPIO_2
+	select OMAP3_GPIO_3
+	select OMAP3_GPIO_4
+	select OMAP3_GPIO_5
+	select OMAP3_GPIO_6
+	imply CMD_DM
+
+config TARGET_OMAP3_PANDORA
+	bool "OMAP3 Pandora"
+	select OMAP3_GPIO_4
+	select OMAP3_GPIO_6
+
+config TARGET_OMAP3_LOGIC
+	bool "OMAP3 Logic"
+	select BOARD_LATE_INIT
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select OMAP3_GPIO_3
+	select OMAP3_GPIO_4
+	select OMAP3_GPIO_6
+	imply CMD_DM
+
+config TARGET_NOKIA_RX51
+	bool "Nokia RX51"
+
+config TARGET_TAO3530
+	bool "TAO3530"
+	select OMAP3_GPIO_2
+	select OMAP3_GPIO_3
+	select OMAP3_GPIO_4
+	select OMAP3_GPIO_5
+	select OMAP3_GPIO_6
+
+config TARGET_SNIPER
+	bool "LG Optimus Black"
+	select DM
+	select DM_GPIO
+	select DM_SERIAL
+	select OMAP3_GPIO_2
+	select OMAP3_GPIO_3
+	select OMAP3_GPIO_4
+	select OMAP3_GPIO_5
+	select OMAP3_GPIO_6
+	imply CMD_DM
+
+endchoice
+
+choice
+	prompt "Memory Controller"
+	default SDRC
+
+config SDRC
+	bool "SDRC controller"
+	help
+	  The default memory controller on most OMAP3 boards is SDRC.
+
+config EMIF4
+	bool "EMIF4 controller"
+	help
+	  Enable this on boards like AM3517 which use EMIF4 controller
+endchoice
+
+config SPL_OMAP3_ID_NAND
+	bool "Support OMAP3-specific ID and MFR function"
+	help
+	  Support for an OMAP3-specific set of functions to return the
+	  ID and MFR of the first attached NAND chip, if present.
+
+config SYS_SOC
+	default "omap3"
+
+source "board/logicpd/am3517evm/Kconfig"
+source "board/ti/beagle/Kconfig"
+source "board/timll/devkit8000/Kconfig"
+source "board/ti/evm/Kconfig"
+source "board/isee/igep00x0/Kconfig"
+source "board/logicpd/omap3som/Kconfig"
+source "board/nokia/rx51/Kconfig"
+source "board/lg/sniper/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/Makefile b/roms/u-boot/arch/arm/mach-omap2/omap3/Makefile
new file mode 100644
index 000000000..151bdf6eb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/Makefile
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+# If clock.c is compiled for Thumb2, then it fails on OMAP3530
+CFLAGS_clock.o += -marm
+
+obj-y	:= lowlevel_init.o
+
+obj-y	+= board.o
+CFLAGS_REMOVE_board.o := $(LTO_CFLAGS)
+obj-y	+= boot.o
+obj-y	+= clock.o
+obj-y	+= sys_info.o
+obj-y	+= prcm-regs.o
+obj-y	+= hw_data.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_OMAP3_ID_NAND)	+= spl_id_nand.o
+endif
+
+obj-$(CONFIG_DRIVER_TI_EMAC)	+= emac.o
+obj-$(CONFIG_EMIF4)	+= emif4.o
+obj-$(CONFIG_SDRC)	+= sdrc.o
+obj-$(CONFIG_USB_MUSB_AM35X)	+= am35x_musb.o
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/am35x_musb.c b/roms/u-boot/arch/arm/mach-omap2/omap3/am35x_musb.c
new file mode 100644
index 000000000..1121acc00
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/am35x_musb.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This file configures the internal USB PHY in AM35X.
+ *
+ * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * Based on omap_phy_internal.c code from Linux by
+ * Hema HK <hemahk@ti.com>
+ */
+
+#include <common.h>
+#include <log.h>
+#include <dm/device.h>
+#include <asm/io.h>
+#include <asm/arch/am35x_def.h>
+
+void am35x_musb_reset(struct udevice *dev)
+{
+	/* Reset the musb interface */
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			0, USBOTGSS_SW_RST);
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			USBOTGSS_SW_RST, 0);
+}
+
+void am35x_musb_phy_power(struct udevice *dev, u8 on)
+{
+	unsigned long start = get_timer(0);
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN,
+				CONF2_PHY_PLLON);
+
+		debug("Waiting for PHY clock good...\n");
+		while (!(readl(&am35x_scm_general_regs->devconf2)
+				& CONF2_PHYCLKGD)) {
+
+			if (get_timer(start) > CONFIG_SYS_HZ / 10) {
+				printf("musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_PHY_PLLON,
+				CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+	}
+}
+
+void am35x_musb_clear_irq(struct udevice *dev)
+{
+	clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
+			0, USBOTGSS_INT_CLR);
+	readl(&am35x_scm_general_regs->lvl_intr_clr);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/board.c b/roms/u-boot/arch/arm/mach-omap2/omap3/board.c
new file mode 100644
index 000000000..029bd5459
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/board.c
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Common board functions for OMAP3 based boards.
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *      Sunil Kumar <sunilsaini05@gmail.com>
+ *      Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *      Richard Woodruff <r-woodruff2@ti.com>
+ *      Syed Mohammed Khasim <khasim@ti.com>
+ *
+ */
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <init.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/cache.h>
+#include <asm/armv7.h>
+#include <asm/gpio.h>
+#include <asm/omap_common.h>
+#include <linux/compiler.h>
+
+/* Declarations */
+extern omap3_sysinfo sysinfo;
+#ifndef CONFIG_SYS_L2CACHE_OFF
+static void omap3_invalidate_l2_cache_secure(void);
+#endif
+
+#if CONFIG_IS_ENABLED(DM_GPIO)
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+/* Manually initialize GPIO banks when OF_CONTROL doesn't */
+static const struct omap_gpio_plat omap34xx_gpio[] = {
+	{ 0, OMAP34XX_GPIO1_BASE },
+	{ 1, OMAP34XX_GPIO2_BASE },
+	{ 2, OMAP34XX_GPIO3_BASE },
+	{ 3, OMAP34XX_GPIO4_BASE },
+	{ 4, OMAP34XX_GPIO5_BASE },
+	{ 5, OMAP34XX_GPIO6_BASE },
+};
+
+U_BOOT_DRVINFOS(omap34xx_gpios) = {
+	{ "gpio_omap", &omap34xx_gpio[0] },
+	{ "gpio_omap", &omap34xx_gpio[1] },
+	{ "gpio_omap", &omap34xx_gpio[2] },
+	{ "gpio_omap", &omap34xx_gpio[3] },
+	{ "gpio_omap", &omap34xx_gpio[4] },
+	{ "gpio_omap", &omap34xx_gpio[5] },
+};
+#endif
+#else
+
+static const struct gpio_bank gpio_bank_34xx[6] = {
+	{ (void *)OMAP34XX_GPIO1_BASE },
+	{ (void *)OMAP34XX_GPIO2_BASE },
+	{ (void *)OMAP34XX_GPIO3_BASE },
+	{ (void *)OMAP34XX_GPIO4_BASE },
+	{ (void *)OMAP34XX_GPIO5_BASE },
+	{ (void *)OMAP34XX_GPIO6_BASE },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
+
+#endif
+
+/******************************************************************************
+ * Routine: secure_unlock
+ * Description: Setup security registers for access
+ *              (GP Device only)
+ *****************************************************************************/
+void secure_unlock_mem(void)
+{
+	struct pm *pm_rt_ape_base = (struct pm *)PM_RT_APE_BASE_ADDR_ARM;
+	struct pm *pm_gpmc_base = (struct pm *)PM_GPMC_BASE_ADDR_ARM;
+	struct pm *pm_ocm_ram_base = (struct pm *)PM_OCM_RAM_BASE_ADDR_ARM;
+	struct pm *pm_iva2_base = (struct pm *)PM_IVA2_BASE_ADDR_ARM;
+	struct sms *sms_base = (struct sms *)OMAP34XX_SMS_BASE;
+
+	/* Protection Module Register Target APE (PM_RT) */
+	writel(UNLOCK_1, &pm_rt_ape_base->req_info_permission_1);
+	writel(UNLOCK_1, &pm_rt_ape_base->read_permission_0);
+	writel(UNLOCK_1, &pm_rt_ape_base->wirte_permission_0);
+	writel(UNLOCK_2, &pm_rt_ape_base->addr_match_1);
+
+	writel(UNLOCK_3, &pm_gpmc_base->req_info_permission_0);
+	writel(UNLOCK_3, &pm_gpmc_base->read_permission_0);
+	writel(UNLOCK_3, &pm_gpmc_base->wirte_permission_0);
+
+	writel(UNLOCK_3, &pm_ocm_ram_base->req_info_permission_0);
+	writel(UNLOCK_3, &pm_ocm_ram_base->read_permission_0);
+	writel(UNLOCK_3, &pm_ocm_ram_base->wirte_permission_0);
+	writel(UNLOCK_2, &pm_ocm_ram_base->addr_match_2);
+
+	/* IVA Changes */
+	writel(UNLOCK_3, &pm_iva2_base->req_info_permission_0);
+	writel(UNLOCK_3, &pm_iva2_base->read_permission_0);
+	writel(UNLOCK_3, &pm_iva2_base->wirte_permission_0);
+
+	/* SDRC region 0 public */
+	writel(UNLOCK_1, &sms_base->rg_att0);
+}
+
+/******************************************************************************
+ * Routine: secureworld_exit()
+ * Description: If chip is EMU and boot type is external
+ *		configure secure registers and exit secure world
+ *              general use.
+ *****************************************************************************/
+void secureworld_exit(void)
+{
+	unsigned long i;
+
+	/* configure non-secure access control register */
+	__asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i));
+	/* enabling co-processor CP10 and CP11 accesses in NS world */
+	__asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i));
+	/*
+	 * allow allocation of locked TLBs and L2 lines in NS world
+	 * allow use of PLE registers in NS world also
+	 */
+	__asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i));
+	__asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i));
+
+	/* Enable ASA in ACR register */
+	__asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
+	__asm__ __volatile__("orr %0, %0, #0x10":"=r"(i));
+	__asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
+
+	/* Exiting secure world */
+	__asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i));
+	__asm__ __volatile__("orr %0, %0, #0x31":"=r"(i));
+	__asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i));
+}
+
+/******************************************************************************
+ * Routine: try_unlock_sram()
+ * Description: If chip is GP/EMU(special) type, unlock the SRAM for
+ *              general use.
+ *****************************************************************************/
+void try_unlock_memory(void)
+{
+	int mode;
+	int in_sdram = is_running_in_sdram();
+
+	/*
+	 * if GP device unlock device SRAM for general use
+	 * secure code breaks for Secure/Emulation device - HS/E/T
+	 */
+	mode = get_device_type();
+	if (mode == GP_DEVICE)
+		secure_unlock_mem();
+
+	/*
+	 * If device is EMU and boot is XIP external booting
+	 * Unlock firewalls and disable L2 and put chip
+	 * out of secure world
+	 *
+	 * Assuming memories are unlocked by the demon who put us in SDRAM
+	 */
+	if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F)
+	    && (!in_sdram)) {
+		secure_unlock_mem();
+		secureworld_exit();
+	}
+
+	return;
+}
+
+void early_system_init(void)
+{
+	hw_data_init();
+}
+
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
+	!defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+/******************************************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ *              - Called path is with SRAM stack.
+ *****************************************************************************/
+void s_init(void)
+{
+	watchdog_init();
+	early_system_init();
+
+	try_unlock_memory();
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+	/* Invalidate L2-cache from secure mode */
+	omap3_invalidate_l2_cache_secure();
+#endif
+
+	set_muxconf_regs();
+	sdelay(100);
+
+	prcm_init();
+
+	per_clocks_enable();
+
+#ifdef CONFIG_USB_EHCI_OMAP
+	ehci_clocks_enable();
+#endif
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	early_system_init();
+	mem_init();
+	/*
+	* Save the boot parameters passed from romcode.
+	* We cannot delay the saving further than this,
+	* to prevent overwrites.
+	*/
+	save_omap_boot_params();
+}
+#endif
+
+/*
+ * Routine: misc_init_r
+ * Description: A basic misc_init_r that just displays the die ID
+ */
+int __weak misc_init_r(void)
+{
+	omap_die_id_display();
+
+	return 0;
+}
+
+/******************************************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ *****************************************************************************/
+static void wait_for_command_complete(struct watchdog *wd_base)
+{
+	int pending = 1;
+	do {
+		pending = readl(&wd_base->wwps);
+	} while (pending);
+}
+
+/******************************************************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************************************************/
+void watchdog_init(void)
+{
+	struct watchdog *wd2_base = (struct watchdog *)WD2_BASE;
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+
+	/*
+	 * There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is
+	 * either taken care of by ROM (HS/EMU) or not accessible (GP).
+	 * We need to take care of WD2-MPU or take a PRCM reset. WD3
+	 * should not be running and does not generate a PRCM reset.
+	 */
+
+	setbits_le32(&prcm_base->fclken_wkup, 0x20);
+	setbits_le32(&prcm_base->iclken_wkup, 0x20);
+	wait_on_value(ST_WDT2, 0x20, &prcm_base->idlest_wkup, 5);
+
+	writel(WD_UNLOCK1, &wd2_base->wspr);
+	wait_for_command_complete(wd2_base);
+	writel(WD_UNLOCK2, &wd2_base->wspr);
+}
+
+/******************************************************************************
+ * Dummy function to handle errors for EABI incompatibility
+ *****************************************************************************/
+void abort(void)
+{
+}
+
+#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_SPL_BUILD)
+/******************************************************************************
+ * OMAP3 specific command to switch between NAND HW and SW ecc
+ *****************************************************************************/
+static int do_switch_ecc(struct cmd_tbl *cmdtp, int flag, int argc,
+			 char *const argv[])
+{
+	int hw, strength = 1;
+
+	if (argc < 2 || argc > 3)
+		goto usage;
+
+	if (strncmp(argv[1], "hw", 2) == 0) {
+		hw = 1;
+		if (argc == 3) {
+			if (strncmp(argv[2], "bch8", 4) == 0)
+				strength = 8;
+			else if (strncmp(argv[2], "bch16", 5) == 0)
+				strength = 16;
+			else if (strncmp(argv[2], "hamming", 7) != 0)
+				goto usage;
+		}
+	} else if (strncmp(argv[1], "sw", 2) == 0) {
+		hw = 0;
+		if (argc == 3) {
+			if (strncmp(argv[2], "bch8", 4) == 0)
+				strength = 8;
+			else if (strncmp(argv[2], "hamming", 7) != 0)
+				goto usage;
+		}
+	} else {
+		goto usage;
+	}
+
+	return -omap_nand_switch_ecc(hw, strength);
+
+usage:
+	printf ("Usage: nandecc %s\n", cmdtp->usage);
+	return 1;
+}
+
+U_BOOT_CMD(
+	nandecc, 3, 1,	do_switch_ecc,
+	"switch OMAP3 NAND ECC calculation algorithm",
+	"hw [hamming|bch8|bch16] - Switch between NAND hardware 1-bit hamming"
+	" and 8-bit/16-bit BCH\n"
+	"                           ecc calculation (second parameter may"
+	" be omitted).\n"
+	"nandecc sw               - Switch to NAND software ecc algorithm."
+);
+
+#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+/**
+ * Print board information
+ */
+int checkboard (void)
+{
+	char *mem_s ;
+
+	if (is_mem_sdr())
+		mem_s = "mSDR";
+	else
+		mem_s = "LPDDR";
+
+	printf("%s + %s/%s\n", sysinfo.board_string, mem_s,
+			sysinfo.nand_string);
+
+	return 0;
+}
+#endif	/* CONFIG_DISPLAY_BOARDINFO */
+
+static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
+{
+	u32 i, num_params = *parameters;
+	u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA;
+
+	/*
+	 * copy the parameters to an un-cached area to avoid coherency
+	 * issues
+	 */
+	for (i = 0; i < num_params; i++) {
+		__raw_writel(*parameters, sram_scratch_space);
+		parameters++;
+		sram_scratch_space++;
+	}
+
+	/* Now make the PPA call */
+	do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
+}
+
+void __weak omap3_set_aux_cr_secure(u32 acr)
+{
+	struct emu_hal_params emu_romcode_params;
+
+	emu_romcode_params.num_params = 1;
+	emu_romcode_params.param1 = acr;
+	omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
+			       (u32 *)&emu_romcode_params);
+}
+
+void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
+				 u32 cpu_rev_comb, u32 cpu_variant,
+				 u32 cpu_rev)
+{
+	if (get_device_type() == GP_DEVICE)
+		omap_smc1(OMAP3_GP_ROMCODE_API_WRITE_L2ACR, l2auxctrl);
+
+	/* L2 Cache Auxiliary Control Register is not banked */
+}
+
+void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+			  u32 cpu_variant, u32 cpu_rev)
+{
+	/* Write ACR - affects secure banked bits */
+	if (get_device_type() == GP_DEVICE)
+		omap_smc1(OMAP3_GP_ROMCODE_API_WRITE_ACR, acr);
+	else
+		omap3_set_aux_cr_secure(acr);
+
+	/* Write ACR - affects non-secure banked bits - some erratas need it */
+	asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
+}
+
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
+{
+	u32 acr;
+
+	/* Read ACR */
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	acr &= ~clear_bits;
+	acr |= set_bits;
+	v7_arch_cp15_set_acr(acr, 0, 0, 0, 0);
+
+}
+
+/* Invalidate the entire L2 cache from secure mode */
+static void omap3_invalidate_l2_cache_secure(void)
+{
+	if (get_device_type() == GP_DEVICE) {
+		omap_smc1(OMAP3_GP_ROMCODE_API_L2_INVAL, 0);
+	} else {
+		struct emu_hal_params emu_romcode_params;
+		emu_romcode_params.num_params = 1;
+		emu_romcode_params.param1 = 0;
+		omap3_emu_romcode_call(OMAP3_EMU_HAL_API_L2_INVAL,
+				       (u32 *)&emu_romcode_params);
+	}
+}
+
+void v7_outer_cache_enable(void)
+{
+
+	/*
+	 * Set L2EN
+	 * On some revisions L2EN bit is banked on some revisions it's not
+	 * No harm in setting both banked bits(in fact this is required
+	 * by an erratum)
+	 */
+	omap3_update_aux_cr(0x2, 0);
+}
+
+void omap3_outer_cache_disable(void)
+{
+	/*
+	 * Clear L2EN
+	 * On some revisions L2EN bit is banked on some revisions it's not
+	 * No harm in clearing both banked bits(in fact this is required
+	 * by an erratum)
+	 */
+	omap3_update_aux_cr(0, 0x2);
+}
+#endif /* !CONFIG_SYS_L2CACHE_OFF */
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/boot.c b/roms/u-boot/arch/arm/mach-omap2/omap3/boot.c
new file mode 100644
index 000000000..ea26115b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/boot.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OMAP3 boot
+ *
+ * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <spl.h>
+
+static u32 boot_devices[] = {
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_MMC2_2,
+};
+
+u32 omap_sys_boot_device(void)
+{
+	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+	u32 sys_boot;
+
+	/* Grab the first 5 bits of the status register for SYS_BOOT. */
+	sys_boot = readl(&ctrl_base->status) & ((1 << 5) - 1);
+
+	if (sys_boot >= (sizeof(boot_devices) / sizeof(u32)))
+		return BOOT_DEVICE_NONE;
+
+	return boot_devices[sys_boot];
+}
+
+int omap_reboot_mode(char *mode, unsigned int length)
+{
+	u32 reboot_mode;
+	char c;
+
+	if (length < 2)
+		return -1;
+
+	reboot_mode = readl((u32 *)(OMAP34XX_SCRATCHPAD +
+		OMAP_REBOOT_REASON_OFFSET));
+
+	c = (reboot_mode >> 24) & 0xff;
+	if (c != 'B')
+		return -1;
+
+	c = (reboot_mode >> 16) & 0xff;
+	if (c != 'M')
+		return -1;
+
+	c = reboot_mode & 0xff;
+
+	mode[0] = c;
+	mode[1] = '\0';
+
+	return 0;
+}
+
+int omap_reboot_mode_clear(void)
+{
+	writel(0, (u32 *)(OMAP34XX_SCRATCHPAD + OMAP_REBOOT_REASON_OFFSET));
+
+	return 0;
+}
+
+int omap_reboot_mode_store(char *mode)
+{
+	u32 reboot_mode;
+
+	reboot_mode = 'B' << 24 | 'M' << 16 | mode[0];
+
+	writel(reboot_mode, (u32 *)(OMAP34XX_SCRATCHPAD +
+		OMAP_REBOOT_REASON_OFFSET));
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/clock.c b/roms/u-boot/arch/arm/mach-omap2/omap3/clock.c
new file mode 100644
index 000000000..71f73492c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/clock.c
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *      Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Derived from Beagle Board and OMAP3 SDP code by
+ *      Richard Woodruff <r-woodruff2@ti.com>
+ *      Syed Mohammed Khasim <khasim@ti.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clocks_omap3.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <command.h>
+
+/******************************************************************************
+ * get_sys_clk_speed() - determine reference oscillator speed
+ *                       based on known 32kHz clock and gptimer.
+ *****************************************************************************/
+u32 get_osc_clk_speed(void)
+{
+	u32 start, cstart, cend, cdiff, cdiv, val;
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	struct prm *prm_base = (struct prm *)PRM_BASE;
+	struct gptimer *gpt1_base = (struct gptimer *)OMAP34XX_GPT1;
+	struct s32ktimer *s32k_base = (struct s32ktimer *)SYNC_32KTIMER_BASE;
+
+	val = readl(&prm_base->clksrc_ctrl);
+
+	if (val & SYSCLKDIV_2)
+		cdiv = 2;
+	else
+		cdiv = 1;
+
+	/* enable timer2 */
+	val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1;
+
+	/* select sys_clk for GPT1 */
+	writel(val, &prcm_base->clksel_wkup);
+
+	/* Enable I and F Clocks for GPT1 */
+	val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC;
+	writel(val, &prcm_base->iclken_wkup);
+
+	val = readl(&prcm_base->fclken_wkup) | EN_GPT1;
+	writel(val, &prcm_base->fclken_wkup);
+
+	writel(0, &gpt1_base->tldr);		/* start counting at 0 */
+	writel(GPT_EN, &gpt1_base->tclr);	/* enable clock */
+
+	/* enable 32kHz source, determine sys_clk via gauging */
+
+	/* start time in 20 cycles */
+	start = 20 + readl(&s32k_base->s32k_cr);
+
+	/* dead loop till start time */
+	while (readl(&s32k_base->s32k_cr) < start);
+
+	/* get start sys_clk count */
+	cstart = readl(&gpt1_base->tcrr);
+
+	/* wait for 40 cycles */
+	while (readl(&s32k_base->s32k_cr) < (start + 20)) ;
+	cend = readl(&gpt1_base->tcrr);		/* get end sys_clk count */
+	cdiff = cend - cstart;			/* get elapsed ticks */
+	cdiff *= cdiv;
+
+	/* based on number of ticks assign speed */
+	if (cdiff > 19000)
+		return S38_4M;
+	else if (cdiff > 15200)
+		return S26M;
+	else if (cdiff > 13000)
+		return S24M;
+	else if (cdiff > 9000)
+		return S19_2M;
+	else if (cdiff > 7600)
+		return S13M;
+	else
+		return S12M;
+}
+
+/******************************************************************************
+ * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
+ *                       input oscillator clock frequency.
+ *****************************************************************************/
+void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
+{
+	switch(osc_clk) {
+	case S38_4M:
+		*sys_clkin_sel = 4;
+		break;
+	case S26M:
+		*sys_clkin_sel = 3;
+		break;
+	case S19_2M:
+		*sys_clkin_sel = 2;
+		break;
+	case S13M:
+		*sys_clkin_sel = 1;
+		break;
+	case S12M:
+	default:
+		*sys_clkin_sel = 0;
+	}
+}
+
+/*
+ * OMAP34XX/35XX specific functions
+ */
+
+static void dpll3_init_34xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *) get_core_dpll_param();
+	void (*f_lock_pll) (u32, u32, u32, u32);
+	int xip_safe, p0, p1, p2, p3;
+
+	xip_safe = is_running_in_sram();
+
+	/* Moving to the right sysclk and ES rev base */
+	ptr = ptr + (3 * clk_index) + sil_index;
+
+	if (xip_safe) {
+		/*
+		 * CORE DPLL
+		 */
+		clrsetbits_le32(&prcm_base->clken_pll,
+				0x00000007, PLL_FAST_RELOCK_BYPASS);
+		wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen,
+				LDELAY);
+
+		/*
+		 * For OMAP3 ES1.0 Errata 1.50, default value directly doesn't
+		 * work. write another value and then default value.
+		 */
+
+		/* CM_CLKSEL1_EMU[DIV_DPLL3] */
+		clrsetbits_le32(&prcm_base->clksel1_emu,
+				0x001F0000, (CORE_M3X2 + 1) << 16) ;
+		clrsetbits_le32(&prcm_base->clksel1_emu,
+				0x001F0000, CORE_M3X2 << 16);
+
+		/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
+		clrsetbits_le32(&prcm_base->clksel1_pll,
+				0xF8000000, ptr->m2 << 27);
+
+		/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
+		clrsetbits_le32(&prcm_base->clksel1_pll,
+				0x07FF0000, ptr->m << 16);
+
+		/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
+		clrsetbits_le32(&prcm_base->clksel1_pll,
+				0x00007F00, ptr->n << 8);
+
+		/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
+		clrbits_le32(&prcm_base->clksel1_pll, 0x00000040);
+
+		/* SSI */
+		clrsetbits_le32(&prcm_base->clksel_core,
+				0x00000F00, CORE_SSI_DIV << 8);
+		/* FSUSB */
+		clrsetbits_le32(&prcm_base->clksel_core,
+				0x00000030, CORE_FUSB_DIV << 4);
+		/* L4 */
+		clrsetbits_le32(&prcm_base->clksel_core,
+				0x0000000C, CORE_L4_DIV << 2);
+		/* L3 */
+		clrsetbits_le32(&prcm_base->clksel_core,
+				0x00000003, CORE_L3_DIV);
+		/* GFX */
+		clrsetbits_le32(&prcm_base->clksel_gfx,
+				0x00000007, GFX_DIV);
+		/* RESET MGR */
+		clrsetbits_le32(&prcm_base->clksel_wkup,
+				0x00000006, WKUP_RSM << 1);
+		/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
+		clrsetbits_le32(&prcm_base->clken_pll,
+				0x000000F0, ptr->fsel << 4);
+		/* LOCK MODE */
+		clrsetbits_le32(&prcm_base->clken_pll,
+				0x00000007, PLL_LOCK);
+
+		wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
+				LDELAY);
+	} else if (is_running_in_flash()) {
+		/*
+		 * if running from flash, jump to small relocated code
+		 * area in SRAM.
+		 */
+		f_lock_pll = (void *) (SRAM_CLK_CODE);
+
+		p0 = readl(&prcm_base->clken_pll);
+		clrsetbits_le32(&p0, 0x00000007, PLL_FAST_RELOCK_BYPASS);
+		/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
+		clrsetbits_le32(&p0, 0x000000F0, ptr->fsel << 4);
+
+		p1 = readl(&prcm_base->clksel1_pll);
+		/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
+		clrsetbits_le32(&p1, 0xF8000000, ptr->m2 << 27);
+		/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
+		clrsetbits_le32(&p1, 0x07FF0000, ptr->m << 16);
+		/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
+		clrsetbits_le32(&p1, 0x00007F00, ptr->n << 8);
+		/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
+		clrbits_le32(&p1, 0x00000040);
+
+		p2 = readl(&prcm_base->clksel_core);
+		/* SSI */
+		clrsetbits_le32(&p2, 0x00000F00, CORE_SSI_DIV << 8);
+		/* FSUSB */
+		clrsetbits_le32(&p2, 0x00000030, CORE_FUSB_DIV << 4);
+		/* L4 */
+		clrsetbits_le32(&p2, 0x0000000C, CORE_L4_DIV << 2);
+		/* L3 */
+		clrsetbits_le32(&p2, 0x00000003, CORE_L3_DIV);
+
+		p3 = (u32)&prcm_base->idlest_ckgen;
+
+		(*f_lock_pll) (p0, p1, p2, p3);
+	}
+}
+
+static void dpll4_init_34xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *) get_per_dpll_param();
+
+	/* Moving it to the right sysclk base */
+	ptr = ptr + clk_index;
+
+	/* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */
+	clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_STOP << 16);
+	wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
+
+	/*
+	 * Errata 1.50 Workaround for OMAP3 ES1.0 only
+	 * If using default divisors, write default divisor + 1
+	 * and then the actual divisor value
+	 */
+	/* M6 */
+	clrsetbits_le32(&prcm_base->clksel1_emu,
+			0x1F000000, (PER_M6X2 + 1) << 24);
+	clrsetbits_le32(&prcm_base->clksel1_emu,
+			0x1F000000, PER_M6X2 << 24);
+	/* M5 */
+	clrsetbits_le32(&prcm_base->clksel_cam, 0x0000001F, (PER_M5X2 + 1));
+	clrsetbits_le32(&prcm_base->clksel_cam, 0x0000001F, PER_M5X2);
+	/* M4 */
+	clrsetbits_le32(&prcm_base->clksel_dss, 0x0000001F, (PER_M4X2 + 1));
+	clrsetbits_le32(&prcm_base->clksel_dss, 0x0000001F, PER_M4X2);
+	/* M3 */
+	clrsetbits_le32(&prcm_base->clksel_dss,
+			0x00001F00, (PER_M3X2 + 1) << 8);
+	clrsetbits_le32(&prcm_base->clksel_dss,
+			0x00001F00, PER_M3X2 << 8);
+	/* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */
+	clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, (ptr->m2 + 1));
+	clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, ptr->m2);
+	/* Workaround end */
+
+	/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */
+	clrsetbits_le32(&prcm_base->clksel2_pll,
+			0x0007FF00, ptr->m << 8);
+
+	/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
+	clrsetbits_le32(&prcm_base->clksel2_pll, 0x0000007F, ptr->n);
+
+	/* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */
+	clrsetbits_le32(&prcm_base->clken_pll, 0x00F00000, ptr->fsel << 20);
+
+	/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
+	clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_LOCK << 16);
+	wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
+}
+
+static void dpll5_init_34xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *) get_per2_dpll_param();
+
+	/* Moving it to the right sysclk base */
+	ptr = ptr + clk_index;
+
+	/* PER2 DPLL (DPLL5) */
+	clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_STOP);
+	wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY);
+	/* set M2 (usbtll_fck) */
+	clrsetbits_le32(&prcm_base->clksel5_pll, 0x0000001F, ptr->m2);
+	/* set m (11-bit multiplier) */
+	clrsetbits_le32(&prcm_base->clksel4_pll, 0x0007FF00, ptr->m << 8);
+	/* set n (7-bit divider)*/
+	clrsetbits_le32(&prcm_base->clksel4_pll, 0x0000007F, ptr->n);
+	/* FREQSEL */
+	clrsetbits_le32(&prcm_base->clken_pll, 0x000000F0, ptr->fsel << 4);
+	/* lock mode */
+	clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_LOCK);
+	wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY);
+}
+
+static void mpu_init_34xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *) get_mpu_dpll_param();
+
+	/* Moving to the right sysclk and ES rev base */
+	ptr = ptr + (3 * clk_index) + sil_index;
+
+	/* MPU DPLL (unlocked already) */
+
+	/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
+	clrsetbits_le32(&prcm_base->clksel2_pll_mpu,
+			0x0000001F, ptr->m2);
+
+	/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
+	clrsetbits_le32(&prcm_base->clksel1_pll_mpu,
+			0x0007FF00, ptr->m << 8);
+
+	/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
+	clrsetbits_le32(&prcm_base->clksel1_pll_mpu,
+			0x0000007F, ptr->n);
+
+	/* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */
+	clrsetbits_le32(&prcm_base->clken_pll_mpu,
+			0x000000F0, ptr->fsel << 4);
+}
+
+static void iva_init_34xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *) get_iva_dpll_param();
+
+	/* Moving to the right sysclk and ES rev base */
+	ptr = ptr + (3 * clk_index) + sil_index;
+
+	/* IVA DPLL */
+	/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
+	clrsetbits_le32(&prcm_base->clken_pll_iva2,
+			0x00000007, PLL_STOP);
+	wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
+
+	/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
+	clrsetbits_le32(&prcm_base->clksel2_pll_iva2,
+			0x0000001F, ptr->m2);
+
+	/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
+	clrsetbits_le32(&prcm_base->clksel1_pll_iva2,
+			0x0007FF00, ptr->m << 8);
+
+	/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
+	clrsetbits_le32(&prcm_base->clksel1_pll_iva2,
+			0x0000007F, ptr->n);
+
+	/* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */
+	clrsetbits_le32(&prcm_base->clken_pll_iva2,
+			0x000000F0, ptr->fsel << 4);
+
+	/* LOCK MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
+	clrsetbits_le32(&prcm_base->clken_pll_iva2,
+			0x00000007, PLL_LOCK);
+
+	wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
+}
+
+/*
+ * OMAP3630 specific functions
+ */
+
+static void dpll3_init_36xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *) get_36x_core_dpll_param();
+	void (*f_lock_pll) (u32, u32, u32, u32);
+	int xip_safe, p0, p1, p2, p3;
+
+	xip_safe = is_running_in_sram();
+
+	/* Moving it to the right sysclk base */
+	ptr += clk_index;
+
+	if (xip_safe) {
+		/* CORE DPLL */
+
+		/* Select relock bypass: CM_CLKEN_PLL[0:2] */
+		clrsetbits_le32(&prcm_base->clken_pll,
+				0x00000007, PLL_FAST_RELOCK_BYPASS);
+		wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen,
+				LDELAY);
+
+		/* CM_CLKSEL1_EMU[DIV_DPLL3] */
+		clrsetbits_le32(&prcm_base->clksel1_emu,
+				0x001F0000, CORE_M3X2 << 16);
+
+		/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
+		clrsetbits_le32(&prcm_base->clksel1_pll,
+				0xF8000000, ptr->m2 << 27);
+
+		/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
+		clrsetbits_le32(&prcm_base->clksel1_pll,
+				0x07FF0000, ptr->m << 16);
+
+		/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
+		clrsetbits_le32(&prcm_base->clksel1_pll,
+				0x00007F00, ptr->n << 8);
+
+		/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
+		clrbits_le32(&prcm_base->clksel1_pll, 0x00000040);
+
+		/* SSI */
+		clrsetbits_le32(&prcm_base->clksel_core,
+				0x00000F00, CORE_SSI_DIV << 8);
+		/* FSUSB */
+		clrsetbits_le32(&prcm_base->clksel_core,
+				0x00000030, CORE_FUSB_DIV << 4);
+		/* L4 */
+		clrsetbits_le32(&prcm_base->clksel_core,
+				0x0000000C, CORE_L4_DIV << 2);
+		/* L3 */
+		clrsetbits_le32(&prcm_base->clksel_core,
+				0x00000003, CORE_L3_DIV);
+		/* GFX */
+		clrsetbits_le32(&prcm_base->clksel_gfx,
+				0x00000007, GFX_DIV_36X);
+		/* RESET MGR */
+		clrsetbits_le32(&prcm_base->clksel_wkup,
+				0x00000006, WKUP_RSM << 1);
+		/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
+		clrsetbits_le32(&prcm_base->clken_pll,
+				0x000000F0, ptr->fsel << 4);
+		/* LOCK MODE */
+		clrsetbits_le32(&prcm_base->clken_pll,
+				0x00000007, PLL_LOCK);
+
+		wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
+				LDELAY);
+	} else if (is_running_in_flash()) {
+		/*
+		 * if running from flash, jump to small relocated code
+		 * area in SRAM.
+		 */
+		f_lock_pll = (void *) (SRAM_CLK_CODE);
+
+		p0 = readl(&prcm_base->clken_pll);
+		clrsetbits_le32(&p0, 0x00000007, PLL_FAST_RELOCK_BYPASS);
+		/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
+		clrsetbits_le32(&p0, 0x000000F0, ptr->fsel << 4);
+
+		p1 = readl(&prcm_base->clksel1_pll);
+		/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
+		clrsetbits_le32(&p1, 0xF8000000, ptr->m2 << 27);
+		/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
+		clrsetbits_le32(&p1, 0x07FF0000, ptr->m << 16);
+		/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
+		clrsetbits_le32(&p1, 0x00007F00, ptr->n << 8);
+		/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
+		clrbits_le32(&p1, 0x00000040);
+
+		p2 = readl(&prcm_base->clksel_core);
+		/* SSI */
+		clrsetbits_le32(&p2, 0x00000F00, CORE_SSI_DIV << 8);
+		/* FSUSB */
+		clrsetbits_le32(&p2, 0x00000030, CORE_FUSB_DIV << 4);
+		/* L4 */
+		clrsetbits_le32(&p2, 0x0000000C, CORE_L4_DIV << 2);
+		/* L3 */
+		clrsetbits_le32(&p2, 0x00000003, CORE_L3_DIV);
+
+		p3 = (u32)&prcm_base->idlest_ckgen;
+
+		(*f_lock_pll) (p0, p1, p2, p3);
+	}
+}
+
+static void dpll4_init_36xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	struct dpll_per_36x_param *ptr;
+
+	ptr = (struct dpll_per_36x_param *)get_36x_per_dpll_param();
+
+	/* Moving it to the right sysclk base */
+	ptr += clk_index;
+
+	/* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */
+	clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_STOP << 16);
+	wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
+
+	/* M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */
+	clrsetbits_le32(&prcm_base->clksel1_emu, 0x3F000000, ptr->m6 << 24);
+
+	/* M5 (CLKSEL_CAM): CM_CLKSEL1_EMU[0:5] */
+	clrsetbits_le32(&prcm_base->clksel_cam, 0x0000003F, ptr->m5);
+
+	/* M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */
+	clrsetbits_le32(&prcm_base->clksel_dss, 0x0000003F, ptr->m4);
+
+	/* M3 (CLKSEL_DSS1): CM_CLKSEL_DSS[8:13] */
+	clrsetbits_le32(&prcm_base->clksel_dss, 0x00003F00, ptr->m3 << 8);
+
+	/* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */
+	clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, ptr->m2);
+
+	/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */
+	clrsetbits_le32(&prcm_base->clksel2_pll, 0x000FFF00, ptr->m << 8);
+
+	/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
+	clrsetbits_le32(&prcm_base->clksel2_pll, 0x0000007F, ptr->n);
+
+	/* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */
+	clrsetbits_le32(&prcm_base->clksel_core, 0x00003000, ptr->m2div << 12);
+
+	/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
+	clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_LOCK << 16);
+	wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
+}
+
+static void dpll5_init_36xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *) get_36x_per2_dpll_param();
+
+	/* Moving it to the right sysclk base */
+	ptr = ptr + clk_index;
+
+	/* PER2 DPLL (DPLL5) */
+	clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_STOP);
+	wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY);
+	/* set M2 (usbtll_fck) */
+	clrsetbits_le32(&prcm_base->clksel5_pll, 0x0000001F, ptr->m2);
+	/* set m (11-bit multiplier) */
+	clrsetbits_le32(&prcm_base->clksel4_pll, 0x0007FF00, ptr->m << 8);
+	/* set n (7-bit divider)*/
+	clrsetbits_le32(&prcm_base->clksel4_pll, 0x0000007F, ptr->n);
+	/* lock mode */
+	clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_LOCK);
+	wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY);
+}
+
+static void mpu_init_36xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *) get_36x_mpu_dpll_param();
+
+	/* Moving to the right sysclk */
+	ptr += clk_index;
+
+	/* MPU DPLL (unlocked already */
+
+	/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
+	clrsetbits_le32(&prcm_base->clksel2_pll_mpu, 0x0000001F, ptr->m2);
+
+	/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
+	clrsetbits_le32(&prcm_base->clksel1_pll_mpu, 0x0007FF00, ptr->m << 8);
+
+	/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
+	clrsetbits_le32(&prcm_base->clksel1_pll_mpu, 0x0000007F, ptr->n);
+}
+
+static void iva_init_36xx(u32 sil_index, u32 clk_index)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	dpll_param *ptr = (dpll_param *)get_36x_iva_dpll_param();
+
+	/* Moving to the right sysclk */
+	ptr += clk_index;
+
+	/* IVA DPLL */
+	/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
+	clrsetbits_le32(&prcm_base->clken_pll_iva2, 0x00000007, PLL_STOP);
+	wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
+
+	/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
+	clrsetbits_le32(&prcm_base->clksel2_pll_iva2, 0x0000001F, ptr->m2);
+
+	/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
+	clrsetbits_le32(&prcm_base->clksel1_pll_iva2, 0x0007FF00, ptr->m << 8);
+
+	/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
+	clrsetbits_le32(&prcm_base->clksel1_pll_iva2, 0x0000007F, ptr->n);
+
+	/* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
+	clrsetbits_le32(&prcm_base->clken_pll_iva2, 0x00000007, PLL_LOCK);
+
+	wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
+}
+
+/******************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h
+ *               called from SRAM, or Flash (using temp SRAM stack).
+ *****************************************************************************/
+void prcm_init(void)
+{
+	u32 osc_clk = 0, sys_clkin_sel;
+	u32 clk_index, sil_index = 0;
+	struct prm *prm_base = (struct prm *)PRM_BASE;
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+
+	/*
+	 * Gauge the input clock speed and find out the sys_clkin_sel
+	 * value corresponding to the input clock.
+	 */
+	osc_clk = get_osc_clk_speed();
+	get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
+
+	/* set input crystal speed */
+	clrsetbits_le32(&prm_base->clksel, 0x00000007, sys_clkin_sel);
+
+	/* If the input clock is greater than 19.2M always divide/2 */
+	if (sys_clkin_sel > 2) {
+		/* input clock divider */
+		clrsetbits_le32(&prm_base->clksrc_ctrl, 0x000000C0, 2 << 6);
+		clk_index = sys_clkin_sel / 2;
+	} else {
+		/* input clock divider */
+		clrsetbits_le32(&prm_base->clksrc_ctrl, 0x000000C0, 1 << 6);
+		clk_index = sys_clkin_sel;
+	}
+
+	if (get_cpu_family() == CPU_OMAP36XX) {
+		/*
+		 * In warm reset conditions on OMAP36xx/AM/DM37xx
+		 * the rom code incorrectly sets the DPLL4 clock
+		 * input divider to /6.5. Section 3.5.3.3.3.2.1 of
+		 * the AM/DM37x TRM explains that the /6.5 divider
+		 * is used only when the input clock is 13MHz.
+		 *
+		 * If the part is in this cpu family *and* the input
+		 * clock *is not* 13 MHz, then reset the DPLL4 clock
+		 * input divider to /1 as it should never set to /6.5
+		 * in this case.
+		 */
+		if (sys_clkin_sel != 1) {	/* 13 MHz */
+			/* Bit 8: DPLL4_CLKINP_DIV */
+			clrbits_le32(&prm_base->clksrc_ctrl, 0x00000100);
+		}
+
+		/* Unlock MPU DPLL (slows things down, and needed later) */
+		clrsetbits_le32(&prcm_base->clken_pll_mpu,
+				0x00000007, PLL_LOW_POWER_BYPASS);
+		wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,
+				LDELAY);
+
+		dpll3_init_36xx(0, clk_index);
+		dpll4_init_36xx(0, clk_index);
+		dpll5_init_36xx(0, clk_index);
+		iva_init_36xx(0, clk_index);
+		mpu_init_36xx(0, clk_index);
+
+		/* Lock MPU DPLL to set frequency */
+		clrsetbits_le32(&prcm_base->clken_pll_mpu,
+				0x00000007, PLL_LOCK);
+		wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu,
+				LDELAY);
+	} else {
+		/*
+		 * The DPLL tables are defined according to sysclk value and
+		 * silicon revision. The clk_index value will be used to get
+		 * the values for that input sysclk from the DPLL param table
+		 * and sil_index will get the values for that SysClk for the
+		 * appropriate silicon rev.
+		 */
+		if (((get_cpu_family() == CPU_OMAP34XX)
+				&& (get_cpu_rev() >= CPU_3XX_ES20)) ||
+			(get_cpu_family() == CPU_AM35XX))
+			sil_index = 1;
+
+		/* Unlock MPU DPLL (slows things down, and needed later) */
+		clrsetbits_le32(&prcm_base->clken_pll_mpu,
+				0x00000007, PLL_LOW_POWER_BYPASS);
+		wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,
+				LDELAY);
+
+		dpll3_init_34xx(sil_index, clk_index);
+		dpll4_init_34xx(sil_index, clk_index);
+		dpll5_init_34xx(sil_index, clk_index);
+		if (get_cpu_family() != CPU_AM35XX)
+			iva_init_34xx(sil_index, clk_index);
+
+		mpu_init_34xx(sil_index, clk_index);
+
+		/* Lock MPU DPLL to set frequency */
+		clrsetbits_le32(&prcm_base->clken_pll_mpu,
+				0x00000007, PLL_LOCK);
+		wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu,
+				LDELAY);
+	}
+
+	/* Set up GPTimers to sys_clk source only */
+	setbits_le32(&prcm_base->clksel_per, 0x000000FF);
+	setbits_le32(&prcm_base->clksel_wkup, 1);
+
+	sdelay(5000);
+}
+
+/*
+ * Enable usb ehci uhh, tll clocks
+ */
+void ehci_clocks_enable(void)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+
+	/* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */
+	setbits_le32(&prcm_base->iclken_usbhost, 1);
+	/*
+	 * Enable USBHOST_48M_FCLK (USBHOST_FCLK1)
+	 * and USBHOST_120M_FCLK (USBHOST_FCLK2)
+	 */
+	setbits_le32(&prcm_base->fclken_usbhost, 0x00000003);
+	/* Enable USBTTL_ICLK */
+	setbits_le32(&prcm_base->iclken3_core, 0x00000004);
+	/* Enable USBTTL_FCLK */
+	setbits_le32(&prcm_base->fclken3_core, 0x00000004);
+}
+
+/******************************************************************************
+ * peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...)
+ *****************************************************************************/
+void per_clocks_enable(void)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+
+	/* Enable GP2 timer. */
+	setbits_le32(&prcm_base->clksel_per, 0x01);	/* GPT2 = sys clk */
+	setbits_le32(&prcm_base->iclken_per, 0x08);	/* ICKen GPT2 */
+	setbits_le32(&prcm_base->fclken_per, 0x08);	/* FCKen GPT2 */
+
+	/* Enable GP9 timer. */
+	setbits_le32(&prcm_base->clksel_per, 0x80);	/* GPT9 = 32kHz clk */
+	setbits_le32(&prcm_base->iclken_per, 0x400);	/* ICKen GPT9 */
+	setbits_le32(&prcm_base->fclken_per, 0x400);	/* FCKen GPT9 */
+
+#ifdef CONFIG_SYS_NS16550
+	/* Enable UART1 clocks */
+	setbits_le32(&prcm_base->fclken1_core, 0x00002000);
+	setbits_le32(&prcm_base->iclken1_core, 0x00002000);
+
+	/* Enable UART2 clocks */
+	setbits_le32(&prcm_base->fclken1_core, 0x00004000);
+	setbits_le32(&prcm_base->iclken1_core, 0x00004000);
+
+	/* UART 3 Clocks */
+	setbits_le32(&prcm_base->fclken_per, 0x00000800);
+	setbits_le32(&prcm_base->iclken_per, 0x00000800);
+#endif
+
+#if defined(CONFIG_OMAP3_GPIO_2)
+	setbits_le32(&prcm_base->fclken_per, 0x00002000);
+	setbits_le32(&prcm_base->iclken_per, 0x00002000);
+#endif
+#if defined(CONFIG_OMAP3_GPIO_3)
+	setbits_le32(&prcm_base->fclken_per, 0x00004000);
+	setbits_le32(&prcm_base->iclken_per, 0x00004000);
+#endif
+#if defined(CONFIG_OMAP3_GPIO_4)
+	setbits_le32(&prcm_base->fclken_per, 0x00008000);
+	setbits_le32(&prcm_base->iclken_per, 0x00008000);
+#endif
+#if defined(CONFIG_OMAP3_GPIO_5)
+	setbits_le32(&prcm_base->fclken_per, 0x00010000);
+	setbits_le32(&prcm_base->iclken_per, 0x00010000);
+#endif
+#if defined(CONFIG_OMAP3_GPIO_6)
+	setbits_le32(&prcm_base->fclken_per, 0x00020000);
+	setbits_le32(&prcm_base->iclken_per, 0x00020000);
+#endif
+
+#ifdef CONFIG_SYS_I2C_OMAP24XX
+	/* Turn on all 3 I2C clocks */
+	setbits_le32(&prcm_base->fclken1_core, 0x00038000);
+	setbits_le32(&prcm_base->iclken1_core, 0x00038000); /* I2C1,2,3 = on */
+#endif
+	/* Enable the ICLK for 32K Sync Timer as its used in udelay */
+	setbits_le32(&prcm_base->iclken_wkup, 0x00000004);
+
+	if (get_cpu_family() != CPU_AM35XX)
+		out_le32(&prcm_base->fclken_iva2, FCK_IVA2_ON);
+
+	out_le32(&prcm_base->fclken1_core, FCK_CORE1_ON);
+	out_le32(&prcm_base->iclken1_core, ICK_CORE1_ON);
+	out_le32(&prcm_base->iclken2_core, ICK_CORE2_ON);
+	out_le32(&prcm_base->fclken_wkup, FCK_WKUP_ON);
+	out_le32(&prcm_base->iclken_wkup, ICK_WKUP_ON);
+	out_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
+	out_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
+	if (get_cpu_family() != CPU_AM35XX) {
+		out_le32(&prcm_base->fclken_cam, FCK_CAM_ON);
+		out_le32(&prcm_base->iclken_cam, ICK_CAM_ON);
+	}
+
+	sdelay(1000);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/emac.c b/roms/u-boot/arch/arm/mach-omap2/omap3/emac.c
new file mode 100644
index 000000000..d0d0b7a75
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/emac.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * DaVinci EMAC initialization.
+ *
+ * (C) Copyright 2011, Ilya Yanok, Emcraft Systems
+ */
+
+#include <common.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/am35x_def.h>
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(struct bd_info *bis)
+{
+	u32 reset;
+
+	/* ensure that the module is out of reset */
+	reset = readl(&am35x_scm_general_regs->ip_sw_reset);
+	reset &= ~CPGMACSS_SW_RST;
+	writel(reset, &am35x_scm_general_regs->ip_sw_reset);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/emif4.c b/roms/u-boot/arch/arm/mach-omap2/omap3/emif4.c
new file mode 100644
index 000000000..df6e9ce1d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/emif4.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Author :
+ *     Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Based on mem.c and sdrc.c
+ *
+ * Copyright (C) 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/emif4.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+extern omap3_sysinfo sysinfo;
+
+static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE;
+
+/*
+ * is_mem_sdr -
+ *  - Return 1 if mem type in use is SDR
+ */
+u32 is_mem_sdr(void)
+{
+	return 0;
+}
+
+/*
+ * get_sdr_cs_size -
+ *  - Get size of chip select 0/1
+ */
+u32 get_sdr_cs_size(u32 cs)
+{
+	u32 size = 0;
+
+	/* TODO: Calculate the size based on EMIF4 configuration */
+	if (cs == CS0)
+		size = CONFIG_SYS_CS0_SIZE;
+
+	return size;
+}
+
+/*
+ * get_sdr_cs_offset -
+ *  - Get offset of cs from cs0 start
+ */
+u32 get_sdr_cs_offset(u32 cs)
+{
+	u32 offset = 0;
+
+	return offset;
+}
+
+/*
+ * do_emif4_init -
+ *  - Init the emif4 module for DDR access
+ *  - Early init routines, called from flash or SRAM.
+ */
+static void do_emif4_init(void)
+{
+	unsigned int regval;
+	/* Set the DDR PHY parameters in PHY ctrl registers */
+	regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS |
+		EMIF4_DDR1_EXT_STRB_DIS);
+	writel(regval, &emif4_base->ddr_phyctrl1);
+	writel(regval, &emif4_base->ddr_phyctrl1_shdw);
+	writel(0, &emif4_base->ddr_phyctrl2);
+
+	/* Reset the DDR PHY and wait till completed */
+	regval = readl(&emif4_base->sdram_iodft_tlgc);
+	regval |= (1<<10);
+	writel(regval, &emif4_base->sdram_iodft_tlgc);
+	/*Wait till that bit clears*/
+	while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) != 0x0);
+	/*Re-verify the DDR PHY status*/
+	while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0);
+
+	regval |= (1<<0);
+	writel(regval, &emif4_base->sdram_iodft_tlgc);
+	/* Set SDR timing registers */
+	regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD |
+		EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS |
+		EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD |
+		EMIF4_TIM1_T_RP);
+	writel(regval, &emif4_base->sdram_time1);
+	writel(regval, &emif4_base->sdram_time1_shdw);
+
+	regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP |
+		EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR |
+		EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP);
+	writel(regval, &emif4_base->sdram_time2);
+	writel(regval, &emif4_base->sdram_time2_shdw);
+
+	regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC);
+	writel(regval, &emif4_base->sdram_time3);
+	writel(regval, &emif4_base->sdram_time3_shdw);
+
+	/* Set the PWR control register */
+	regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE |
+		EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE);
+	writel(regval, &emif4_base->sdram_pwr_mgmt);
+	writel(regval, &emif4_base->sdram_pwr_mgmt_shdw);
+
+	/* Set the DDR refresh rate control register */
+	regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS);
+	writel(regval, &emif4_base->sdram_refresh_ctrl);
+	writel(regval, &emif4_base->sdram_refresh_ctrl_shdw);
+
+	/* set the SDRAM configuration register */
+	regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK |
+		EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE |
+		EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD |
+		EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL |
+		EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM |
+		EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP);
+	writel(regval, &emif4_base->sdram_config);
+}
+
+/*
+ * dram_init -
+ *  - Sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+	unsigned int size0 = 0, size1 = 0;
+
+	size0 = get_sdr_cs_size(CS0);
+	/*
+	 * If a second bank of DDR is attached to CS1 this is
+	 * where it can be started.  Early init code will init
+	 * memory on CS0.
+	 */
+	if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED))
+		size1 = get_sdr_cs_size(CS1);
+
+	gd->ram_size = size0 + size1;
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	unsigned int size0 = 0, size1 = 0;
+
+	size0 = get_sdr_cs_size(CS0);
+	size1 = get_sdr_cs_size(CS1);
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = size0;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
+	gd->bd->bi_dram[1].size = size1;
+
+	return 0;
+}
+
+/*
+ * mem_init() -
+ *  - Initialize memory subsystem
+ */
+void mem_init(void)
+{
+	do_emif4_init();
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/hw_data.c b/roms/u-boot/arch/arm/mach-omap2/omap3/hw_data.c
new file mode 100644
index 000000000..1d21fcc59
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/hw_data.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * HW data initialization for OMAP3.
+ *
+ * (C) Copyright 2017 Linaro Ltd.
+ * Sam Protsenko <semen.protsenko@linaro.org>
+ */
+
+#include <asm/arch/omap.h>
+#include <asm/omap_common.h>
+
+struct omap_sys_ctrl_regs const **ctrl =
+	(struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
+
+void hw_data_init(void)
+{
+	*ctrl = &omap3_ctrl;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/lowlevel_init.S b/roms/u-boot/arch/arm/mach-omap2/omap3/lowlevel_init.S
new file mode 100644
index 000000000..4fa89418a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/lowlevel_init.S
@@ -0,0 +1,480 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Initial Code by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ */
+
+#include <config.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks_omap3.h>
+#include <linux/linkage.h>
+
+/*
+ * Funtion for making PPA HAL API calls in secure devices
+ * Input:
+ *	R0 - Service ID
+ *	R1 - paramer list
+ */
+/* TODO: Re-evaluate the comment at the end regarding armv5 vs armv7 */
+ENTRY(do_omap3_emu_romcode_call)
+	PUSH {r4-r12, lr} @ Save all registers from ROM code!
+	MOV r12, r0	@ Copy the Secure Service ID in R12
+	MOV r3, r1	@ Copy the pointer to va_list in R3
+	MOV r1, #0	@ Process ID - 0
+	MOV r2, #OMAP3_EMU_HAL_START_HAL_CRITICAL	@ Copy the pointer
+							@ to va_list in R3
+	MOV r6, #0xFF	@ Indicate new Task call
+	mcr     p15, 0, r0, c7, c10, 4	@ DSB
+	mcr     p15, 0, r0, c7, c10, 5	@ DMB
+	.word	0xe1600071	@ SMC #1 to call PPA service - hand assembled
+				@ because we use -march=armv5
+	POP {r4-r12, pc}
+ENDPROC(do_omap3_emu_romcode_call)
+
+#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
+/**************************************************************************
+ * cpy_clk_code: relocates clock code into SRAM where its safer to execute
+ * R1 = SRAM destination address.
+ *************************************************************************/
+ENTRY(cpy_clk_code)
+	/* Copy DPLL code into SRAM */
+	adr	r0, go_to_speed		/* copy from start of go_to_speed... */
+	adr	r2, go_to_speed_end	/* ... up to start of go_to_speed_end */
+next2:
+	ldmia	r0!, {r3 - r10}		/* copy from source address [r0] */
+	stmia	r1!, {r3 - r10}		/* copy to   target address [r1] */
+	cmp	r0, r2			/* until source end address [r2] */
+	blo	next2
+	mov	pc, lr			/* back to caller */
+ENDPROC(cpy_clk_code)
+
+/* ***************************************************************************
+ *  go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
+ *               -executed from SRAM.
+ *  R0 = CM_CLKEN_PLL-bypass value
+ *  R1 = CM_CLKSEL1_PLL-m, n, and divider values
+ *  R2 = CM_CLKSEL_CORE-divider values
+ *  R3 = CM_IDLEST_CKGEN - addr dpll lock wait
+ *
+ *  Note: If core unlocks/relocks and SDRAM is running fast already it gets
+ *        confused.  A reset of the controller gets it back.  Taking away its
+ *        L3 when its not in self refresh seems bad for it.  Normally, this
+ *	  code runs from flash before SDR is init so that should be ok.
+ ****************************************************************************/
+ENTRY(go_to_speed)
+	stmfd sp!, {r4 - r6}
+
+	/* move into fast relock bypass */
+	ldr	r4, pll_ctl_add
+	str	r0, [r4]
+wait1:
+	ldr	r5, [r3]		/* get status */
+	and	r5, r5, #0x1		/* isolate core status */
+	cmp	r5, #0x1		/* still locked? */
+	beq	wait1			/* if lock, loop */
+
+	/* set new dpll dividers _after_ in bypass */
+	ldr	r5, pll_div_add1
+	str	r1, [r5]		/* set m, n, m2 */
+	ldr	r5, pll_div_add2
+	str	r2, [r5]		/* set l3/l4/.. dividers*/
+	ldr	r5, pll_div_add3	/* wkup */
+	ldr	r2, pll_div_val3	/* rsm val */
+	str	r2, [r5]
+	ldr	r5, pll_div_add4	/* gfx */
+	ldr	r2, pll_div_val4
+	str	r2, [r5]
+	ldr	r5, pll_div_add5	/* emu */
+	ldr	r2, pll_div_val5
+	str	r2, [r5]
+
+	/* now prepare GPMC (flash) for new dpll speed */
+	/* flash needs to be stable when we jump back to it */
+	ldr	r5, flash_cfg3_addr
+	ldr	r2, flash_cfg3_val
+	str	r2, [r5]
+	ldr	r5, flash_cfg4_addr
+	ldr	r2, flash_cfg4_val
+	str	r2, [r5]
+	ldr	r5, flash_cfg5_addr
+	ldr	r2, flash_cfg5_val
+	str	r2, [r5]
+	ldr	r5, flash_cfg1_addr
+	ldr	r2, [r5]
+	orr	r2, r2, #0x3		/* up gpmc divider */
+	str	r2, [r5]
+
+	/* lock DPLL3 and wait a bit */
+	orr	r0, r0, #0x7	/* set up for lock mode */
+	str	r0, [r4]	/* lock */
+	nop			/* ARM slow at this point working at sys_clk */
+	nop
+	nop
+	nop
+wait2:
+	ldr	r5, [r3]	/* get status */
+	and	r5, r5, #0x1	/* isolate core status */
+	cmp	r5, #0x1	/* still locked? */
+	bne	wait2		/* if lock, loop */
+	nop
+	nop
+	nop
+	nop
+	ldmfd	sp!, {r4 - r6}
+	mov	pc, lr		/* back to caller, locked */
+ENDPROC(go_to_speed)
+
+_go_to_speed: .word go_to_speed
+
+/* these constants need to be close for PIC code */
+/* The Nor has to be in the Flash Base CS0 for this condition to happen */
+flash_cfg1_addr:
+	.word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG1)
+flash_cfg3_addr:
+	.word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG3)
+flash_cfg3_val:
+	.word STNOR_GPMC_CONFIG3
+flash_cfg4_addr:
+	.word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG4)
+flash_cfg4_val:
+	.word STNOR_GPMC_CONFIG4
+flash_cfg5_val:
+	.word STNOR_GPMC_CONFIG5
+flash_cfg5_addr:
+	.word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG5)
+pll_ctl_add:
+	.word CM_CLKEN_PLL
+pll_div_add1:
+	.word CM_CLKSEL1_PLL
+pll_div_add2:
+	.word CM_CLKSEL_CORE
+pll_div_add3:
+	.word CM_CLKSEL_WKUP
+pll_div_val3:
+	.word (WKUP_RSM << 1)
+pll_div_add4:
+	.word CM_CLKSEL_GFX
+pll_div_val4:
+	.word (GFX_DIV << 0)
+pll_div_add5:
+	.word CM_CLKSEL1_EMU
+pll_div_val5:
+	.word CLSEL1_EMU_VAL
+
+go_to_speed_end:
+#endif
+
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
+	!defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+ENTRY(lowlevel_init)
+	ldr	sp, SRAM_STACK
+	str	ip, [sp]	/* stash ip register */
+	mov	ip, lr		/* save link reg across call */
+#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT)
+/*
+ * No need to copy/exec the clock code - DPLL adjust already done
+ * in NAND/oneNAND Boot.
+ */
+	ldr	r1, =SRAM_CLK_CODE
+	bl	cpy_clk_code
+#endif /* NAND Boot */
+	mov	lr, ip		/* restore link reg */
+	ldr	ip, [sp]	/* restore save ip */
+	/* tail-call s_init to setup pll, mux, memory */
+	b	s_init
+
+ENDPROC(lowlevel_init)
+#endif
+
+	/* the literal pools origin */
+	.ltorg
+
+REG_CONTROL_STATUS:
+	.word CONTROL_STATUS
+SRAM_STACK:
+	.word LOW_LEVEL_SRAM_STACK
+
+/* DPLL(1-4) PARAM TABLES */
+
+/*
+ * Each of the tables has M, N, FREQSEL, M2 values defined for nominal
+ * OPP (1.2V). The fields are defined according to dpll_param struct (clock.c).
+ * The values are defined for all possible sysclk and for ES1 and ES2.
+ */
+
+mpu_dpll_param:
+/* 12MHz */
+/* ES1 */
+.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1
+/* ES2 */
+.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2
+/* 3410 */
+.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12
+
+/* 13MHz */
+/* ES1 */
+.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1
+/* ES2 */
+.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2
+/* 3410 */
+.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13
+
+/* 19.2MHz */
+/* ES1 */
+.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1
+/* ES2 */
+.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2
+/* 3410 */
+.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2
+
+/* 26MHz */
+/* ES1 */
+.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1
+/* ES2 */
+.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2
+/* 3410 */
+.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26
+
+/* 38.4MHz */
+/* ES1 */
+.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1
+/* ES2 */
+.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2
+/* 3410 */
+.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4
+
+
+.globl get_mpu_dpll_param
+get_mpu_dpll_param:
+	adr	r0, mpu_dpll_param
+	mov	pc, lr
+
+iva_dpll_param:
+/* 12MHz */
+/* ES1 */
+.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1
+/* ES2 */
+.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2
+/* 3410 */
+.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12
+
+/* 13MHz */
+/* ES1 */
+.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1
+/* ES2 */
+.word IVA_M_13_ES2, IVA_N_13_ES2,  IVA_FSEL_13_ES2, IVA_M2_13_ES2
+/* 3410 */
+.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13
+
+/* 19.2MHz */
+/* ES1 */
+.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1
+/* ES2 */
+.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2
+/* 3410 */
+.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2
+
+/* 26MHz */
+/* ES1 */
+.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1
+/* ES2 */
+.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2
+/* 3410 */
+.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26
+
+/* 38.4MHz */
+/* ES1 */
+.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1
+/* ES2 */
+.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2
+/* 3410 */
+.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4
+
+
+.globl get_iva_dpll_param
+get_iva_dpll_param:
+	adr	r0, iva_dpll_param
+	mov	pc, lr
+
+/* Core DPLL targets for L3 at 166 & L133 */
+core_dpll_param:
+/* 12MHz */
+/* ES1 */
+.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1
+/* ES2 */
+.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
+/* 3410 */
+.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
+
+/* 13MHz */
+/* ES1 */
+.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1
+/* ES2 */
+.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
+/* 3410 */
+.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
+
+/* 19.2MHz */
+/* ES1 */
+.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1
+/* ES2 */
+.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
+/* 3410 */
+.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
+
+/* 26MHz */
+/* ES1 */
+.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1
+/* ES2 */
+.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
+/* 3410 */
+.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
+
+/* 38.4MHz */
+/* ES1 */
+.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1
+/* ES2 */
+.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
+/* 3410 */
+.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
+
+.globl get_core_dpll_param
+get_core_dpll_param:
+	adr	r0, core_dpll_param
+	mov	pc, lr
+
+/* PER DPLL values are same for both ES1 and ES2 */
+per_dpll_param:
+/* 12MHz */
+.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12
+
+/* 13MHz */
+.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13
+
+/* 19.2MHz */
+.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2
+
+/* 26MHz */
+.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26
+
+/* 38.4MHz */
+.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4
+
+.globl get_per_dpll_param
+get_per_dpll_param:
+	adr	r0, per_dpll_param
+	mov	pc, lr
+
+/* PER2 DPLL values */
+per2_dpll_param:
+/* 12MHz */
+.word PER2_M_12, PER2_N_12, PER2_FSEL_12, PER2_M2_12
+
+/* 13MHz */
+.word PER2_M_13, PER2_N_13, PER2_FSEL_13, PER2_M2_13
+
+/* 19.2MHz */
+.word PER2_M_19P2, PER2_N_19P2, PER2_FSEL_19P2, PER2_M2_19P2
+
+/* 26MHz */
+.word PER2_M_26, PER2_N_26, PER2_FSEL_26, PER2_M2_26
+
+/* 38.4MHz */
+.word PER2_M_38P4, PER2_N_38P4, PER2_FSEL_38P4, PER2_M2_38P4
+
+.globl get_per2_dpll_param
+get_per2_dpll_param:
+	adr	r0, per2_dpll_param
+	mov	pc, lr
+
+/*
+ * Tables for 36XX/37XX devices
+ *
+ */
+mpu_36x_dpll_param:
+/* 12MHz */
+.word 50, 0, 0, 1
+/* 13MHz */
+.word 600, 12, 0, 1
+/* 19.2MHz */
+.word 125, 3, 0, 1
+/* 26MHz */
+.word 300, 12, 0, 1
+/* 38.4MHz */
+.word 125, 7, 0, 1
+
+iva_36x_dpll_param:
+/* 12MHz */
+.word 130, 2, 0, 1
+/* 13MHz */
+.word 20, 0, 0, 1
+/* 19.2MHz */
+.word 325, 11, 0, 1
+/* 26MHz */
+.word 10, 0, 0, 1
+/* 38.4MHz */
+.word 325, 23, 0, 1
+
+core_36x_dpll_param:
+/* 12MHz */
+.word 100, 2, 0, 1
+/* 13MHz */
+.word 400, 12, 0, 1
+/* 19.2MHz */
+.word 375, 17, 0, 1
+/* 26MHz */
+.word 200, 12, 0, 1
+/* 38.4MHz */
+.word 375, 35, 0, 1
+
+per_36x_dpll_param:
+/*    SYSCLK    M       N      M2      M3      M4     M5      M6      m2DIV */
+.word 12000,    360,    4,     9,      16,     5,     4,      3,      1
+.word 13000,    864,   12,     9,      16,     9,     4,      3,      1
+.word 19200,    360,    7,     9,      16,     5,     4,      3,      1
+.word 26000,    432,   12,     9,      16,     9,     4,      3,      1
+.word 38400,    360,   15,     9,      16,     5,     4,      3,      1
+
+per2_36x_dpll_param:
+/* 12MHz */
+.word PER2_36XX_M_12, PER2_36XX_N_12, 0, PER2_36XX_M2_12
+/* 13MHz */
+.word PER2_36XX_M_13, PER2_36XX_N_13, 0, PER2_36XX_M2_13
+/* 19.2MHz */
+.word PER2_36XX_M_19P2, PER2_36XX_N_19P2, 0, PER2_36XX_M2_19P2
+/* 26MHz */
+.word PER2_36XX_M_26, PER2_36XX_N_26, 0, PER2_36XX_M2_26
+/* 38.4MHz */
+.word PER2_36XX_M_38P4, PER2_36XX_N_38P4, 0, PER2_36XX_M2_38P4
+
+
+ENTRY(get_36x_mpu_dpll_param)
+	adr	r0, mpu_36x_dpll_param
+	mov	pc, lr
+ENDPROC(get_36x_mpu_dpll_param)
+
+ENTRY(get_36x_iva_dpll_param)
+	adr	r0, iva_36x_dpll_param
+	mov	pc, lr
+ENDPROC(get_36x_iva_dpll_param)
+
+ENTRY(get_36x_core_dpll_param)
+	adr	r0, core_36x_dpll_param
+	mov	pc, lr
+ENDPROC(get_36x_core_dpll_param)
+
+ENTRY(get_36x_per_dpll_param)
+	adr	r0, per_36x_dpll_param
+	mov	pc, lr
+ENDPROC(get_36x_per_dpll_param)
+
+ENTRY(get_36x_per2_dpll_param)
+	adr	r0, per2_36x_dpll_param
+	mov	pc, lr
+ENDPROC(get_36x_per2_dpll_param)
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/prcm-regs.c b/roms/u-boot/arch/arm/mach-omap2/omap3/prcm-regs.c
new file mode 100644
index 000000000..e704c8eef
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/prcm-regs.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * HW regs data for OMAP3.
+ *
+ * (C) Copyright 2017 Linaro Ltd.
+ * Sam Protsenko <semen.protsenko@linaro.org>
+ */
+
+#include <asm/arch/omap.h>
+#include <asm/omap_common.h>
+
+struct omap_sys_ctrl_regs const omap3_ctrl = {
+	.control_status = OMAP34XX_CTRL_BASE + 0x2F0,
+};
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/sdrc.c b/roms/u-boot/arch/arm/mach-omap2/omap3/sdrc.c
new file mode 100644
index 000000000..4d85b1dee
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/sdrc.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions related to OMAP3 SDRC.
+ *
+ * This file has been created after exctracting and consolidating
+ * the SDRC related content from mem.c and board.c, also created
+ * generic init function (mem_init).
+ *
+ * Copyright (C) 2004-2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ *
+ * Author :
+ *     Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Original implementation by (mem.c, board.c) :
+ *      Sunil Kumar <sunilsaini05@gmail.com>
+ *      Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *      Manikandan Pillai <mani.pillai@ti.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+extern omap3_sysinfo sysinfo;
+
+static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
+
+/*
+ * is_mem_sdr -
+ *  - Return 1 if mem type in use is SDR
+ */
+u32 is_mem_sdr(void)
+{
+	if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR)
+		return 1;
+	return 0;
+}
+
+/*
+ * make_cs1_contiguous -
+ * - When we have CS1 populated we want to have it mapped after cs0 to allow
+ *   command line mem=xyz use all memory with out discontinuous support
+ *   compiled in.  We could do it in the ATAG, but there really is two banks...
+ */
+void make_cs1_contiguous(void)
+{
+	u32 size, a_add_low, a_add_high;
+
+	size = get_sdr_cs_size(CS0);
+	size >>= 25;	/* divide by 32 MiB to find size to offset CS1 */
+	a_add_high = (size & 3) << 8;	/* set up low field */
+	a_add_low = (size & 0x3C) >> 2;	/* set up high field */
+	writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
+
+}
+
+
+/*
+ * get_sdr_cs_size -
+ *  - Get size of chip select 0/1
+ */
+u32 get_sdr_cs_size(u32 cs)
+{
+	u32 size;
+
+	/* get ram size field */
+	size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
+	size &= 0x3FF;		/* remove unwanted bits */
+	size <<= 21;		/* multiply by 2 MiB to find size in MB */
+	return size;
+}
+
+/*
+ * get_sdr_cs_offset -
+ *  - Get offset of cs from cs0 start
+ */
+u32 get_sdr_cs_offset(u32 cs)
+{
+	u32 offset;
+
+	if (!cs)
+		return 0;
+
+	offset = readl(&sdrc_base->cs_cfg);
+	offset = (offset & 15) << 27 | (offset & 0x300) << 17;
+
+	return offset;
+}
+
+/*
+ * write_sdrc_timings -
+ *  - Takes CS and associated timings and initalize SDRAM
+ *  - Test CS to make sure it's OK for use
+ */
+static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base,
+			struct board_sdrc_timings *timings)
+{
+	/* Setup timings we got from the board. */
+	writel(timings->mcfg, &sdrc_base->cs[cs].mcfg);
+	writel(timings->ctrla, &sdrc_actim_base->ctrla);
+	writel(timings->ctrlb, &sdrc_actim_base->ctrlb);
+	writel(timings->rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl);
+	writel(CMD_NOP, &sdrc_base->cs[cs].manual);
+	writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
+	writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+	writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+	writel(timings->mr, &sdrc_base->cs[cs].mr);
+
+	/*
+	 * Test ram in this bank
+	 * Disable if bad or not present
+	 */
+	if (!mem_ok(cs))
+		writel(0, &sdrc_base->cs[cs].mcfg);
+}
+
+/*
+ * do_sdrc_init -
+ *  - Code called once in C-Stack only context for CS0 and with early being
+ *    true and a possible 2nd time depending on memory configuration from
+ *    stack+global context.
+ */
+void do_sdrc_init(u32 cs, u32 early)
+{
+	struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1;
+	struct board_sdrc_timings timings;
+
+	sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
+	sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
+
+	/* set some default timings */
+	timings.sharing = SDRC_SHARING;
+
+	/*
+	 * When called in the early context this may be SPL and we will
+	 * need to set all of the timings.  This ends up being board
+	 * specific so we call a helper function to take care of this
+	 * for us.  Otherwise, to be safe, we need to copy the settings
+	 * from the first bank to the second.  We will setup CS0,
+	 * then set cs_cfg to the appropriate value then try and
+	 * setup CS1.
+	 */
+#ifdef CONFIG_SPL_BUILD
+	/* set/modify board-specific timings */
+	get_board_mem_timings(&timings);
+#endif
+	if (early) {
+		/* reset sdrc controller */
+		writel(SOFTRESET, &sdrc_base->sysconfig);
+		wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
+				12000000);
+		writel(0, &sdrc_base->sysconfig);
+
+		/* setup sdrc to ball mux */
+		writel(timings.sharing, &sdrc_base->sharing);
+
+		/* Disable Power Down of CKE because of 1 CKE on combo part */
+		writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH,
+				&sdrc_base->power);
+
+		writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
+		sdelay(0x20000);
+#ifdef CONFIG_SPL_BUILD
+		write_sdrc_timings(CS0, sdrc_actim_base0, &timings);
+		make_cs1_contiguous();
+		write_sdrc_timings(CS1, sdrc_actim_base1, &timings);
+#endif
+
+	}
+
+	/*
+	 * If we aren't using SPL we have been loaded by some
+	 * other means which may not have correctly initialized
+	 * both CS0 and CS1 (such as some older versions of x-loader)
+	 * so we may be asked now to setup CS1.
+	 */
+	if (cs == CS1) {
+		timings.mcfg = readl(&sdrc_base->cs[CS0].mcfg),
+		timings.rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl);
+		timings.ctrla = readl(&sdrc_actim_base0->ctrla);
+		timings.ctrlb = readl(&sdrc_actim_base0->ctrlb);
+		timings.mr = readl(&sdrc_base->cs[CS0].mr);
+		write_sdrc_timings(cs, sdrc_actim_base1, &timings);
+	}
+}
+
+/*
+ * dram_init -
+ *  - Sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+	unsigned int size0 = 0, size1 = 0;
+
+	size0 = get_sdr_cs_size(CS0);
+	/*
+	 * We always need to have cs_cfg point at where the second
+	 * bank would be, if present.  Failure to do so can lead to
+	 * strange situations where memory isn't detected and
+	 * configured correctly.  CS0 will already have been setup
+	 * at this point.
+	 */
+	make_cs1_contiguous();
+	do_sdrc_init(CS1, NOT_EARLY);
+	size1 = get_sdr_cs_size(CS1);
+
+	gd->ram_size = size0 + size1;
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	unsigned int size0 = 0, size1 = 0;
+
+	size0 = get_sdr_cs_size(CS0);
+	size1 = get_sdr_cs_size(CS1);
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = size0;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
+	gd->bd->bi_dram[1].size = size1;
+
+	return 0;
+}
+
+/*
+ * mem_init -
+ *  - Init the sdrc chip,
+ *  - Selects CS0 and CS1,
+ */
+void mem_init(void)
+{
+	/* only init up first bank here */
+	do_sdrc_init(CS0, EARLY_INIT);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/spl_id_nand.c b/roms/u-boot/arch/arm/mach-omap2/omap3/spl_id_nand.c
new file mode 100644
index 000000000..84a0b0ade
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/spl_id_nand.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2011
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *     Tom Rini <trini@ti.com>
+ *
+ * Initial Code from:
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Jian Zhang <jzhang@ti.com>
+ */
+
+#include <common.h>
+#include <jffs2/load_kernel.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/omap_gpmc.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+
+/*
+ * Many boards will want to know the results of the NAND_CMD_READID command
+ * in order to decide what to do about DDR initialization.  This function
+ * allows us to do that very early and to pass those results back to the
+ * board so it can make whatever decisions need to be made.
+ */
+int identify_nand_chip(int *mfr, int *id)
+{
+	int loops = 1000;
+
+	/* Make sure that we have setup GPMC for NAND correctly. */
+	set_gpmc_cs0(MTD_DEV_TYPE_NAND);
+
+	sdelay(2000);
+
+	/* Issue a RESET and then READID */
+	writeb(NAND_CMD_RESET, &gpmc_cfg->cs[0].nand_cmd);
+	writeb(NAND_CMD_STATUS, &gpmc_cfg->cs[0].nand_cmd);
+	while ((readl(&gpmc_cfg->cs[0].nand_dat) & NAND_STATUS_READY)
+	                                        != NAND_STATUS_READY) {
+		sdelay(100);
+		if (--loops == 0)
+			return 1;
+	}
+	writeb(NAND_CMD_READID, &gpmc_cfg->cs[0].nand_cmd);
+
+	/* Set the address to read to 0x0 */
+	writeb(0x0, &gpmc_cfg->cs[0].nand_adr);
+
+	/* Read off the manufacturer and device id. */
+	*mfr = readb(&gpmc_cfg->cs[0].nand_dat);
+	*id = readb(&gpmc_cfg->cs[0].nand_dat);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap3/sys_info.c b/roms/u-boot/arch/arm/mach-omap2/omap3/sys_info.c
new file mode 100644
index 000000000..ac72633c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap3/sys_info.c
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *      Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *      Richard Woodruff <r-woodruff2@ti.com>
+ *      Syed Mohammed Khasim <khasim@ti.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>	/* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <asm/bootm.h>
+#include <asm/omap_common.h>
+
+#include <i2c.h>
+#include <linux/compiler.h>
+
+extern omap3_sysinfo sysinfo;
+static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+static char *rev_s[CPU_3XX_MAX_REV] = {
+				"1.0",
+				"2.0",
+				"2.1",
+				"3.0",
+				"3.1",
+				"UNKNOWN",
+				"UNKNOWN",
+				"3.1.2"};
+
+/* this is the revision table for 37xx CPUs */
+static char *rev_s_37xx[CPU_37XX_MAX_REV] = {
+				"1.0",
+				"1.1",
+				"1.2"};
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+void omap_die_id(unsigned int *die_id)
+{
+	struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
+
+	die_id[0] = readl(&id_base->die_id_0);
+	die_id[1] = readl(&id_base->die_id_1);
+	die_id[2] = readl(&id_base->die_id_2);
+	die_id[3] = readl(&id_base->die_id_3);
+}
+
+/******************************************
+ * get_cpu_type(void) - extract cpu info
+ ******************************************/
+u32 get_cpu_type(void)
+{
+	return readl(&ctrl_base->ctrl_omap_stat);
+}
+
+/******************************************
+ * get_cpu_id(void) - extract cpu id
+ * returns 0 for ES1.0, cpuid otherwise
+ ******************************************/
+u32 get_cpu_id(void)
+{
+	struct ctrl_id *id_base;
+	u32 cpuid = 0;
+
+	/*
+	 * On ES1.0 the IDCODE register is not exposed on L4
+	 * so using CPU ID to differentiate between ES1.0 and > ES1.0.
+	 */
+	__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
+	if ((cpuid & 0xf) == 0x0) {
+		return 0;
+	} else {
+		/* Decode the IDs on > ES1.0 */
+		id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE;
+
+		cpuid = readl(&id_base->idcode);
+	}
+
+	return cpuid;
+}
+
+/******************************************
+ * get_cpu_family(void) - extract cpu info
+ ******************************************/
+u32 get_cpu_family(void)
+{
+	u16 hawkeye;
+	u32 cpu_family;
+	u32 cpuid = get_cpu_id();
+
+	if (cpuid == 0)
+		return CPU_OMAP34XX;
+
+	hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff;
+	switch (hawkeye) {
+	case HAWKEYE_OMAP34XX:
+		cpu_family = CPU_OMAP34XX;
+		break;
+	case HAWKEYE_AM35XX:
+		cpu_family = CPU_AM35XX;
+		break;
+	case HAWKEYE_OMAP36XX:
+		cpu_family = CPU_OMAP36XX;
+		break;
+	default:
+		cpu_family = CPU_OMAP34XX;
+	}
+
+	return cpu_family;
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+	u32 cpuid = get_cpu_id();
+
+	if (cpuid == 0)
+		return CPU_3XX_ES10;
+	else
+		return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf;
+}
+
+/*****************************************************************
+ * get_sku_id(void) - read sku_id to get info on max clock rate
+ *****************************************************************/
+u32 get_sku_id(void)
+{
+	struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
+	return readl(&id_base->sku_id) & SKUID_CLK_MASK;
+}
+
+/***************************************************************************
+ *  get_gpmc0_base() - Return current address hardware will be
+ *     fetching from. The below effectively gives what is correct, its a bit
+ *   mis-leading compared to the TRM.  For the most general case the mask
+ *   needs to be also taken into account this does work in practice.
+ *   - for u-boot we currently map:
+ *       -- 0 to nothing,
+ *       -- 4 to flash
+ *       -- 8 to enent
+ *       -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+	u32 b;
+
+	b = readl(&gpmc_cfg->cs[0].config7);
+	b &= 0x1F;		/* keep base [5:0] */
+	b = b << 24;		/* ret 0x0b000000 */
+	return b;
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+	return WIDTH_16BIT;
+}
+
+/*************************************************************************
+ * get_board_rev() - setup to pass kernel board revision information
+ * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
+ *************************************************************************/
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	return 0x20;
+}
+#endif
+
+/********************************************************
+ *  get_base(); get upper addr of current execution
+ *******************************************************/
+static u32 get_base(void)
+{
+	u32 val;
+
+	__asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+	val &= 0xF0000000;
+	val >>= 28;
+	return val;
+}
+
+/********************************************************
+ *  is_running_in_flash() - tell if currently running in
+ *  FLASH.
+ *******************************************************/
+u32 is_running_in_flash(void)
+{
+	if (get_base() < 4)
+		return 1;	/* in FLASH */
+
+	return 0;		/* running in SRAM or SDRAM */
+}
+
+/********************************************************
+ *  is_running_in_sram() - tell if currently running in
+ *  SRAM.
+ *******************************************************/
+u32 is_running_in_sram(void)
+{
+	if (get_base() == 4)
+		return 1;	/* in SRAM */
+
+	return 0;		/* running in FLASH or SDRAM */
+}
+
+/********************************************************
+ *  is_running_in_sdram() - tell if currently running in
+ *  SDRAM.
+ *******************************************************/
+u32 is_running_in_sdram(void)
+{
+	if (get_base() > 4)
+		return 1;	/* in SDRAM */
+
+	return 0;		/* running in SRAM or FLASH */
+}
+
+/***************************************************************
+ *  get_boot_type() - Is this an XIP type device or a stream one
+ *  bits 4-0 specify type. Bit 5 says mem/perif
+ ***************************************************************/
+u32 get_boot_type(void)
+{
+	return (readl(&ctrl_base->status) & SYSBOOT_MASK);
+}
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+/**
+ * Print CPU information
+ */
+int print_cpuinfo (void)
+{
+	char *cpu_family_s, *cpu_s, *sec_s, *max_clk;
+
+	switch (get_cpu_family()) {
+	case CPU_OMAP34XX:
+		cpu_family_s = "OMAP";
+		switch (get_cpu_type()) {
+		case OMAP3503:
+			cpu_s = "3503";
+			break;
+		case OMAP3515:
+			cpu_s = "3515";
+			break;
+		case OMAP3525:
+			cpu_s = "3525";
+			break;
+		case OMAP3530:
+			cpu_s = "3530";
+			break;
+		default:
+			cpu_s = "35XX";
+			break;
+		}
+		if ((get_cpu_rev() >= CPU_3XX_ES31) &&
+		    (get_sku_id() == SKUID_CLK_720MHZ))
+			max_clk = "720 MHz";
+		else
+			max_clk = "600 MHz";
+
+		break;
+	case CPU_AM35XX:
+		cpu_family_s = "AM";
+		switch (get_cpu_type()) {
+		case AM3505:
+			cpu_s = "3505";
+			break;
+		case AM3517:
+			cpu_s = "3517";
+			break;
+		default:
+			cpu_s = "35XX";
+			break;
+		}
+		max_clk = "600 MHz";
+		break;
+	case CPU_OMAP36XX:
+		switch (get_cpu_type()) {
+		case AM3703:
+			cpu_family_s = "AM";
+			cpu_s = "3703";
+			max_clk = "800 MHz";
+			break;
+		case AM3703_1GHZ:
+			cpu_family_s = "AM";
+			cpu_s = "3703";
+			max_clk = "1 GHz";
+			break;
+		case AM3715:
+			cpu_family_s = "AM";
+			cpu_s = "3715";
+			max_clk = "800 MHz";
+			break;
+		case AM3715_1GHZ:
+			cpu_family_s = "AM";
+			cpu_s = "3715";
+			max_clk = "1 GHz";
+			break;
+		case OMAP3725:
+			cpu_family_s = "OMAP";
+			cpu_s = "3625/3725";
+			max_clk = "800 MHz";
+			break;
+		case OMAP3725_1GHZ:
+			cpu_family_s = "OMAP";
+			cpu_s = "3625/3725";
+			max_clk = "1 GHz";
+			break;
+		case OMAP3730:
+			cpu_family_s = "OMAP";
+			cpu_s = "3630/3730";
+			max_clk = "800 MHz";
+			break;
+		case OMAP3730_1GHZ:
+			cpu_family_s = "OMAP";
+			cpu_s = "3630/3730";
+			max_clk = "1 GHz";
+			break;
+		default:
+			cpu_family_s = "OMAP/AM";
+			cpu_s = "36XX/37XX";
+			max_clk = "1 GHz";
+			break;
+		}
+
+		break;
+	default:
+		cpu_family_s = "OMAP";
+		cpu_s = "35XX";
+		max_clk = "600 MHz";
+	}
+
+	switch (get_device_type()) {
+	case TST_DEVICE:
+		sec_s = "TST";
+		break;
+	case EMU_DEVICE:
+		sec_s = "EMU";
+		break;
+	case HS_DEVICE:
+		sec_s = "HS";
+		break;
+	case GP_DEVICE:
+		sec_s = "GP";
+		break;
+	default:
+		sec_s = "?";
+	}
+
+	if (CPU_OMAP36XX == get_cpu_family())
+		printf("%s%s-%s ES%s, CPU-OPP2, L3-200MHz, Max CPU Clock %s\n",
+		       cpu_family_s, cpu_s, sec_s,
+		       rev_s_37xx[get_cpu_rev()], max_clk);
+	else
+		printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n",
+			cpu_family_s, cpu_s, sec_s,
+			rev_s[get_cpu_rev()], max_clk);
+
+	return 0;
+}
+#endif	/* CONFIG_DISPLAY_CPUINFO */
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap4/Kconfig b/roms/u-boot/arch/arm/mach-omap2/omap4/Kconfig
new file mode 100644
index 000000000..cdac11c6b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap4/Kconfig
@@ -0,0 +1,21 @@
+if OMAP44XX
+
+choice
+	prompt "OMAP4 board select"
+	optional
+
+config TARGET_OMAP4_PANDA
+	bool "TI OMAP4 PandaBoard"
+
+config TARGET_OMAP4_SDP4430
+	bool "TI OMAP4 SDP4430"
+
+endchoice
+
+config SYS_SOC
+	default "omap4"
+
+source "board/ti/panda/Kconfig"
+source "board/ti/sdp4430/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap4/Makefile b/roms/u-boot/arch/arm/mach-omap2/omap4/Makefile
new file mode 100644
index 000000000..0ed3fc768
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap4/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2010
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	+= boot.o
+obj-y	+= sdram_elpida.o
+obj-y	+= hwinit.o
+obj-y	+= emif.o
+obj-y	+= prcm-regs.o
+obj-y	+= hw_data.o
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap4/boot.c b/roms/u-boot/arch/arm/mach-omap2/omap4/boot.c
new file mode 100644
index 000000000..90b5380ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap4/boot.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OMAP4 boot
+ *
+ * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/omap_common.h>
+#include <asm/arch/sys_proto.h>
+#include <spl.h>
+
+static u32 boot_devices[] = {
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_XIPWAIT,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_MMC2_2,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_MMC2_2,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_MMC2_2,
+	BOOT_DEVICE_MMC2_2,
+	BOOT_DEVICE_NONE,
+	BOOT_DEVICE_XIPWAIT,
+};
+
+u32 omap_sys_boot_device(void)
+{
+	u32 sys_boot;
+
+	/* Grab the first 5 bits of the status register for SYS_BOOT. */
+	sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 5) - 1);
+
+	if (sys_boot >= (sizeof(boot_devices) / sizeof(u32)))
+		return BOOT_DEVICE_NONE;
+
+	return boot_devices[sys_boot];
+}
+
+int omap_reboot_mode(char *mode, unsigned int length)
+{
+	unsigned int limit;
+	unsigned int i;
+
+	if (length < 2)
+		return -1;
+
+	if (!warm_reset())
+		return -1;
+
+	limit = (length < OMAP_REBOOT_REASON_SIZE) ? length :
+		OMAP_REBOOT_REASON_SIZE;
+
+	for (i = 0; i < (limit - 1); i++)
+		mode[i] = readb((u8 *)(OMAP44XX_SAR_RAM_BASE +
+			OMAP_REBOOT_REASON_OFFSET + i));
+
+	mode[i] = '\0';
+
+	return 0;
+}
+
+int omap_reboot_mode_clear(void)
+{
+	writeb(0, (u8 *)(OMAP44XX_SAR_RAM_BASE + OMAP_REBOOT_REASON_OFFSET));
+
+	return 0;
+}
+
+int omap_reboot_mode_store(char *mode)
+{
+	unsigned int i;
+
+	for (i = 0; i < (OMAP_REBOOT_REASON_SIZE - 1) && mode[i] != '\0'; i++)
+		writeb(mode[i], (u8 *)(OMAP44XX_SAR_RAM_BASE +
+			OMAP_REBOOT_REASON_OFFSET + i));
+
+	writeb('\0', (u8 *)(OMAP44XX_SAR_RAM_BASE +
+		OMAP_REBOOT_REASON_OFFSET + i));
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap4/emif.c b/roms/u-boot/arch/arm/mach-omap2/omap4/emif.c
new file mode 100644
index 000000000..35a51645b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap4/emif.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM;
+u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
+	.max_freq = 400000000,
+	.RL = 6,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 15,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
+	.max_freq = 200000000,
+	.RL = 3,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 20,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+	.tRL = 3,
+	.tRP_AB = 3,
+	.tRCD = 3,
+	.tWR = 3,
+	.tRAS_MIN = 3,
+	.tRRD = 2,
+	.tWTR = 2,
+	.tXP = 2,
+	.tRTP = 2,
+	.tCKE = 3,
+	.tCKESR = 3,
+	.tFAW = 8
+};
+
+static const struct lpddr2_ac_timings *jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_200_mhz,
+	&timings_jedec_400_mhz
+};
+
+const struct lpddr2_device_timings jedec_default_timings = {
+	.ac_timings = jedec_ac_timings,
+	.min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Assume Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &jedec_default_timings;
+	*cs1_device_timings = &jedec_default_timings;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap4/hw_data.c b/roms/u-boot/arch/arm/mach-omap2/omap4/hw_data.c
new file mode 100644
index 000000000..d587a4d4d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap4/hw_data.c
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * HW data initialization for OMAP4
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ */
+#include <common.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clock.h>
+#include <asm/omap_gpio.h>
+#include <asm/io.h>
+
+struct prcm_regs const **prcm =
+			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
+struct dplls const **dplls_data =
+			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+struct vcores_data const **omap_vcores =
+		(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+	(struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
+
+/*
+ * The M & N values in the following tables are created using the
+ * following tool:
+ * tools/omap/clocks_get_m_n.c
+ * Please use this tool for creating the table for any new frequency.
+ */
+
+/*
+ * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF
+ * OMAP4460 OPP_NOM frequency
+ */
+static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
+	{175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/*
+ * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430)
+ * OMAP4430 OPP_TURBO frequency
+ * OMAP4470 OPP_NOM frequency
+ */
+static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/*
+ * dpll locked at 1200 MHz - MPU clk at 600 MHz
+ * OMAP4430 OPP_NOM frequency
+ */
+static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
+	{50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* OMAP4460 OPP_NOM frequency */
+/* OMAP4470 OPP_NOM (Low Power) frequency */
+static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 12 MHz   */
+	{800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 13 MHz   */
+	{619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 26 MHz   */
+	{800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OMAP4430 ES1 OPP_NOM frequency */
+static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
+	{127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 12 MHz   */
+	{762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 13 MHz   */
+	{635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 16.8 MHz */
+	{635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+	{381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 26 MHz   */
+	{254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 27 MHz   */
+	{496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OMAP4430 ES2.X OPP_NOM frequency */
+static const struct dpll_params
+		core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
+	{200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 12 MHz   */
+	{800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 13 MHz   */
+	{619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 26 MHz   */
+	{800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
+	{64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 12 MHz   */
+	{768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 13 MHz   */
+	{320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 16.8 MHz */
+	{40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 19.2 MHz */
+	{384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 26 MHz   */
+	{256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1},	/* 27 MHz   */
+	{20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
+	{931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+#else
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+#endif
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+struct dplls omap4430_dplls_es1 = {
+	.mpu = mpu_dpll_params_1200mhz,
+	.core = core_dpll_params_es1_1524mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls omap4430_dplls_es20 = {
+	.mpu = mpu_dpll_params_1200mhz,
+	.core = core_dpll_params_es2_1600mhz_ddr200mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls omap4430_dplls = {
+	.mpu = mpu_dpll_params_1200mhz,
+	.core = core_dpll_params_1600mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls omap4460_dplls = {
+	.mpu = mpu_dpll_params_1400mhz,
+	.core = core_dpll_params_1600mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls omap4470_dplls = {
+	.mpu = mpu_dpll_params_1600mhz,
+	.core = core_dpll_params_1600mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct pmic_data twl6030_4430es1 = {
+	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
+	.step = 12660, /* 12.66 mV represented in uV */
+	/* The code starts at 1 not 0 */
+	.start_code = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
+};
+
+/* twl6030 struct is used for TWL6030 and TWL6032 PMIC */
+struct pmic_data twl6030 = {
+	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
+	.step = 12660, /* 12.66 mV represented in uV */
+	/* The code starts at 1 not 0 */
+	.start_code = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
+};
+
+struct pmic_data tps62361 = {
+	.base_offset = TPS62361_BASE_VOLT_MV,
+	.step = 10000, /* 10 mV represented in uV */
+	.start_code = 0,
+	.gpio = TPS62361_VSEL0_GPIO,
+	.gpio_en = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
+};
+
+struct vcores_data omap4430_volts_es1 = {
+	.mpu.value[OPP_NOM] = 1325,
+	.mpu.addr = SMPS_REG_ADDR_VCORE1,
+	.mpu.pmic = &twl6030_4430es1,
+
+	.core.value[OPP_NOM] = 1200,
+	.core.addr = SMPS_REG_ADDR_VCORE3,
+	.core.pmic = &twl6030_4430es1,
+
+	.mm.value[OPP_NOM] = 1200,
+	.mm.addr = SMPS_REG_ADDR_VCORE2,
+	.mm.pmic = &twl6030_4430es1,
+};
+
+struct vcores_data omap4430_volts = {
+	.mpu.value[OPP_NOM] = 1325,
+	.mpu.addr = SMPS_REG_ADDR_VCORE1,
+	.mpu.pmic = &twl6030,
+
+	.core.value[OPP_NOM] = 1200,
+	.core.addr = SMPS_REG_ADDR_VCORE3,
+	.core.pmic = &twl6030,
+
+	.mm.value[OPP_NOM] = 1200,
+	.mm.addr = SMPS_REG_ADDR_VCORE2,
+	.mm.pmic = &twl6030,
+};
+
+struct vcores_data omap4460_volts = {
+	.mpu.value[OPP_NOM] = 1203,
+	.mpu.addr = TPS62361_REG_ADDR_SET1,
+	.mpu.pmic = &tps62361,
+
+	.core.value[OPP_NOM] = 1200,
+	.core.addr = SMPS_REG_ADDR_VCORE1,
+	.core.pmic = &twl6030,
+
+	.mm.value[OPP_NOM] = 1200,
+	.mm.addr = SMPS_REG_ADDR_VCORE2,
+	.mm.pmic = &twl6030,
+};
+
+/*
+ * Take closest integer part of the mV value corresponding to a TWL6032 SMPS
+ * voltage selection code. Aligned with OMAP4470 ES1.0 OCA V.0.7.
+ */
+struct vcores_data omap4470_volts = {
+	.mpu.value[OPP_NOM] = 1202,
+	.mpu.addr = SMPS_REG_ADDR_SMPS1,
+	.mpu.pmic = &twl6030,
+
+	.core.value[OPP_NOM] = 1126,
+	.core.addr = SMPS_REG_ADDR_SMPS2,
+	.core.pmic = &twl6030,
+
+	.mm.value[OPP_NOM] = 1139,
+	.mm.addr = SMPS_REG_ADDR_SMPS5,
+	.mm.pmic = &twl6030,
+};
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		(*prcm)->cm_l4per_clkstctrl,
+		(*prcm)->cm_l3init_clkstctrl,
+		(*prcm)->cm_memif_clkstctrl,
+		(*prcm)->cm_l4cfg_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3_gpmc_clkctrl,
+		(*prcm)->cm_memif_emif_1_clkctrl,
+		(*prcm)->cm_memif_emif_2_clkctrl,
+		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
+		(*prcm)->cm_wkup_gpio1_clkctrl,
+		(*prcm)->cm_l4per_gpio2_clkctrl,
+		(*prcm)->cm_l4per_gpio3_clkctrl,
+		(*prcm)->cm_l4per_gpio4_clkctrl,
+		(*prcm)->cm_l4per_gpio5_clkctrl,
+		(*prcm)->cm_l4per_gpio6_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_wkup_gptimer1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc2_clkctrl,
+		(*prcm)->cm_l4per_gptimer2_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_l4per_uart3_clkctrl,
+		(*prcm)->cm_l4per_i2c1_clkctrl,
+		(*prcm)->cm_l4per_i2c2_clkctrl,
+		(*prcm)->cm_l4per_i2c3_clkctrl,
+		(*prcm)->cm_l4per_i2c4_clkctrl,
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 96 MHz clock for MMC1 & MMC2 */
+	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	/* Enable optional 48M functional clock for USB PHY */
+	setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl,
+			USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
+
+	/* Enable 32 KHz clock for USB PHY */
+	setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
+			USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3init_hsusbotg_clkctrl,
+		(*prcm)->cm_l3init_usbphy_clkctrl,
+		(*prcm)->cm_clksel_usb_60mhz,
+		(*prcm)->cm_l3init_hsusbtll_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_l4per_mcspi1_clkctrl,
+		(*prcm)->cm_l3init_hsusbhost_clkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+void hw_data_init(void)
+{
+	u32 omap_rev = omap_revision();
+
+	(*prcm) = &omap4_prcm;
+
+	switch (omap_rev) {
+
+	case OMAP4430_ES1_0:
+	*dplls_data = &omap4430_dplls_es1;
+	*omap_vcores = &omap4430_volts_es1;
+	break;
+
+	case OMAP4430_ES2_0:
+	*dplls_data = &omap4430_dplls_es20;
+	*omap_vcores = &omap4430_volts;
+	break;
+
+	case OMAP4430_ES2_1:
+	case OMAP4430_ES2_2:
+	case OMAP4430_ES2_3:
+	*dplls_data = &omap4430_dplls;
+	*omap_vcores = &omap4430_volts;
+	break;
+
+	case OMAP4460_ES1_0:
+	case OMAP4460_ES1_1:
+	*dplls_data = &omap4460_dplls;
+	*omap_vcores = &omap4460_volts;
+	break;
+
+	case OMAP4470_ES1_0:
+	*dplls_data = &omap4470_dplls;
+	*omap_vcores = &omap4470_volts;
+	break;
+
+	default:
+		printf("\n INVALID OMAP REVISION ");
+	}
+
+	*ctrl = &omap4_ctrl;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap4/hwinit.c b/roms/u-boot/arch/arm/mach-omap2/omap4/hwinit.c
new file mode 100644
index 000000000..27dfa9142
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap4/hwinit.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Common functions for OMAP4 based boards
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ */
+#include <common.h>
+#include <palmas.h>
+#include <asm/armv7.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/sizes.h>
+#include <asm/emif.h>
+#include <asm/arch/gpio.h>
+#include <asm/omap_common.h>
+
+u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
+
+static const struct gpio_bank gpio_bank_44xx[6] = {
+	{ (void *)OMAP44XX_GPIO1_BASE },
+	{ (void *)OMAP44XX_GPIO2_BASE },
+	{ (void *)OMAP44XX_GPIO3_BASE },
+	{ (void *)OMAP44XX_GPIO4_BASE },
+	{ (void *)OMAP44XX_GPIO5_BASE },
+	{ (void *)OMAP44XX_GPIO6_BASE },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Some tuning of IOs for optimal power and performance
+ */
+void do_io_settings(void)
+{
+	u32 lpddr2io;
+
+	u32 omap4_rev = omap_revision();
+
+	if (omap4_rev == OMAP4430_ES1_0)
+		lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
+	else if (omap4_rev == OMAP4430_ES2_0)
+		lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
+	else
+		lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
+
+	/* EMIF1 */
+	writel(lpddr2io, (*ctrl)->control_lpddr2io1_0);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io1_1);
+	/* No pull for GR10 as per hw team's recommendation */
+	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
+		(*ctrl)->control_lpddr2io1_2);
+	writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3);
+
+	/* EMIF2 */
+	writel(lpddr2io, (*ctrl)->control_lpddr2io2_0);
+	writel(lpddr2io, (*ctrl)->control_lpddr2io2_1);
+	/* No pull for GR10 as per hw team's recommendation */
+	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
+		(*ctrl)->control_lpddr2io2_2);
+	writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3);
+
+	/*
+	 * Some of these settings (TRIM values) come from eFuse and are
+	 * in turn programmed in the eFuse at manufacturing time after
+	 * calibration of the device. Do the software over-ride only if
+	 * the device is not correctly trimmed
+	 */
+	if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) {
+
+		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+			(*ctrl)->control_ldosram_iva_voltage_ctrl);
+
+		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+			(*ctrl)->control_ldosram_mpu_voltage_ctrl);
+
+		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+			(*ctrl)->control_ldosram_core_voltage_ctrl);
+	}
+
+	/*
+	 * Over-ride the register
+	 *	i. unconditionally for all 4430
+	 *	ii. only if un-trimmed for 4460
+	 */
+	if (!readl((*ctrl)->control_efuse_1))
+		writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1);
+
+	if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2))
+		writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2);
+}
+#endif /* CONFIG_SPL_BUILD */
+
+/* dummy fuction for omap4 */
+void config_data_eye_leveling_samples(u32 emif_base)
+{
+}
+
+void init_omap_revision(void)
+{
+	/*
+	 * For some of the ES2/ES1 boards ID_CODE is not reliable:
+	 * Also, ES1 and ES2 have different ARM revisions
+	 * So use ARM revision for identification
+	 */
+	unsigned int arm_rev = cortex_rev();
+
+	switch (arm_rev) {
+	case MIDR_CORTEX_A9_R0P1:
+		*omap_si_rev = OMAP4430_ES1_0;
+		break;
+	case MIDR_CORTEX_A9_R1P2:
+		switch (readl(CONTROL_ID_CODE)) {
+		case OMAP4_CONTROL_ID_CODE_ES2_0:
+			*omap_si_rev = OMAP4430_ES2_0;
+			break;
+		case OMAP4_CONTROL_ID_CODE_ES2_1:
+			*omap_si_rev = OMAP4430_ES2_1;
+			break;
+		case OMAP4_CONTROL_ID_CODE_ES2_2:
+			*omap_si_rev = OMAP4430_ES2_2;
+			break;
+		default:
+			*omap_si_rev = OMAP4430_ES2_0;
+			break;
+		}
+		break;
+	case MIDR_CORTEX_A9_R1P3:
+		*omap_si_rev = OMAP4430_ES2_3;
+		break;
+	case MIDR_CORTEX_A9_R2P10:
+		switch (readl(CONTROL_ID_CODE)) {
+		case OMAP4470_CONTROL_ID_CODE_ES1_0:
+			*omap_si_rev = OMAP4470_ES1_0;
+			break;
+		case OMAP4460_CONTROL_ID_CODE_ES1_1:
+			*omap_si_rev = OMAP4460_ES1_1;
+			break;
+		case OMAP4460_CONTROL_ID_CODE_ES1_0:
+		default:
+			*omap_si_rev = OMAP4460_ES1_0;
+			break;
+		}
+		break;
+	default:
+		*omap_si_rev = OMAP4430_SILICON_ID_INVALID;
+		break;
+	}
+}
+
+void omap_die_id(unsigned int *die_id)
+{
+	die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0);
+	die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1);
+	die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2);
+	die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3);
+}
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+void v7_outer_cache_enable(void)
+{
+	omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 1);
+}
+
+void v7_outer_cache_disable(void)
+{
+	omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 0);
+}
+#endif /* !CONFIG_SYS_L2CACHE_OFF */
+
+void vmmc_pbias_config(uint voltage)
+{
+	u32 value = 0;
+
+	value = readl((*ctrl)->control_pbiaslite);
+	value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
+	writel(value, (*ctrl)->control_pbiaslite);
+	value = readl((*ctrl)->control_pbiaslite);
+	value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
+	writel(value, (*ctrl)->control_pbiaslite);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap4/prcm-regs.c b/roms/u-boot/arch/arm/mach-omap2/omap4/prcm-regs.c
new file mode 100644
index 000000000..eaf98b389
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap4/prcm-regs.c
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * HW regs data for OMAP4
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ */
+
+#include <asm/omap_common.h>
+
+struct prcm_regs const omap4_prcm = {
+	/* cm1.ckgen */
+	.cm_clksel_core  = 0x4a004100,
+	.cm_clksel_abe = 0x4a004108,
+	.cm_dll_ctrl = 0x4a004110,
+	.cm_clkmode_dpll_core = 0x4a004120,
+	.cm_idlest_dpll_core = 0x4a004124,
+	.cm_autoidle_dpll_core = 0x4a004128,
+	.cm_clksel_dpll_core = 0x4a00412c,
+	.cm_div_m2_dpll_core = 0x4a004130,
+	.cm_div_m3_dpll_core = 0x4a004134,
+	.cm_div_m4_dpll_core = 0x4a004138,
+	.cm_div_m5_dpll_core = 0x4a00413c,
+	.cm_div_m6_dpll_core = 0x4a004140,
+	.cm_div_m7_dpll_core = 0x4a004144,
+	.cm_ssc_deltamstep_dpll_core = 0x4a004148,
+	.cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+	.cm_emu_override_dpll_core = 0x4a004150,
+	.cm_clkmode_dpll_mpu = 0x4a004160,
+	.cm_idlest_dpll_mpu = 0x4a004164,
+	.cm_autoidle_dpll_mpu = 0x4a004168,
+	.cm_clksel_dpll_mpu = 0x4a00416c,
+	.cm_div_m2_dpll_mpu = 0x4a004170,
+	.cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+	.cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+	.cm_bypclk_dpll_mpu = 0x4a00419c,
+	.cm_clkmode_dpll_iva = 0x4a0041a0,
+	.cm_idlest_dpll_iva = 0x4a0041a4,
+	.cm_autoidle_dpll_iva = 0x4a0041a8,
+	.cm_clksel_dpll_iva = 0x4a0041ac,
+	.cm_div_m4_dpll_iva = 0x4a0041b8,
+	.cm_div_m5_dpll_iva = 0x4a0041bc,
+	.cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+	.cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+	.cm_bypclk_dpll_iva = 0x4a0041dc,
+	.cm_clkmode_dpll_abe = 0x4a0041e0,
+	.cm_idlest_dpll_abe = 0x4a0041e4,
+	.cm_autoidle_dpll_abe = 0x4a0041e8,
+	.cm_clksel_dpll_abe = 0x4a0041ec,
+	.cm_div_m2_dpll_abe = 0x4a0041f0,
+	.cm_div_m3_dpll_abe = 0x4a0041f4,
+	.cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+	.cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+	.cm_clkmode_dpll_ddrphy = 0x4a004220,
+	.cm_idlest_dpll_ddrphy = 0x4a004224,
+	.cm_autoidle_dpll_ddrphy = 0x4a004228,
+	.cm_clksel_dpll_ddrphy = 0x4a00422c,
+	.cm_div_m2_dpll_ddrphy = 0x4a004230,
+	.cm_div_m4_dpll_ddrphy = 0x4a004238,
+	.cm_div_m5_dpll_ddrphy = 0x4a00423c,
+	.cm_div_m6_dpll_ddrphy = 0x4a004240,
+	.cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+	.cm_shadow_freq_config1 = 0x4a004260,
+	.cm_mpu_mpu_clkctrl = 0x4a004320,
+
+	/* cm1.dsp */
+	.cm_dsp_clkstctrl = 0x4a004400,
+	.cm_dsp_dsp_clkctrl = 0x4a004420,
+
+	/* cm1.abe */
+	.cm1_abe_clkstctrl = 0x4a004500,
+	.cm1_abe_l4abe_clkctrl = 0x4a004520,
+	.cm1_abe_aess_clkctrl = 0x4a004528,
+	.cm1_abe_pdm_clkctrl = 0x4a004530,
+	.cm1_abe_dmic_clkctrl = 0x4a004538,
+	.cm1_abe_mcasp_clkctrl = 0x4a004540,
+	.cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+	.cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+	.cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+	.cm1_abe_slimbus_clkctrl = 0x4a004560,
+	.cm1_abe_timer5_clkctrl = 0x4a004568,
+	.cm1_abe_timer6_clkctrl = 0x4a004570,
+	.cm1_abe_timer7_clkctrl = 0x4a004578,
+	.cm1_abe_timer8_clkctrl = 0x4a004580,
+	.cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+	/* cm2.ckgen */
+	.cm_clksel_mpu_m3_iss_root = 0x4a008100,
+	.cm_clksel_usb_60mhz = 0x4a008104,
+	.cm_scale_fclk = 0x4a008108,
+	.cm_core_dvfs_perf1 = 0x4a008110,
+	.cm_core_dvfs_perf2 = 0x4a008114,
+	.cm_core_dvfs_perf3 = 0x4a008118,
+	.cm_core_dvfs_perf4 = 0x4a00811c,
+	.cm_core_dvfs_current = 0x4a008124,
+	.cm_iva_dvfs_perf_tesla = 0x4a008128,
+	.cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+	.cm_iva_dvfs_perf_abe = 0x4a008130,
+	.cm_iva_dvfs_current = 0x4a008138,
+	.cm_clkmode_dpll_per = 0x4a008140,
+	.cm_idlest_dpll_per = 0x4a008144,
+	.cm_autoidle_dpll_per = 0x4a008148,
+	.cm_clksel_dpll_per = 0x4a00814c,
+	.cm_div_m2_dpll_per = 0x4a008150,
+	.cm_div_m3_dpll_per = 0x4a008154,
+	.cm_div_m4_dpll_per = 0x4a008158,
+	.cm_div_m5_dpll_per = 0x4a00815c,
+	.cm_div_m6_dpll_per = 0x4a008160,
+	.cm_div_m7_dpll_per = 0x4a008164,
+	.cm_ssc_deltamstep_dpll_per = 0x4a008168,
+	.cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+	.cm_emu_override_dpll_per = 0x4a008170,
+	.cm_clkmode_dpll_usb = 0x4a008180,
+	.cm_idlest_dpll_usb = 0x4a008184,
+	.cm_autoidle_dpll_usb = 0x4a008188,
+	.cm_clksel_dpll_usb = 0x4a00818c,
+	.cm_div_m2_dpll_usb = 0x4a008190,
+	.cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+	.cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+	.cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+	.cm_clkmode_dpll_unipro = 0x4a0081c0,
+	.cm_idlest_dpll_unipro = 0x4a0081c4,
+	.cm_autoidle_dpll_unipro = 0x4a0081c8,
+	.cm_clksel_dpll_unipro = 0x4a0081cc,
+	.cm_div_m2_dpll_unipro = 0x4a0081d0,
+	.cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+	.cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+	.cm_coreaon_usb_phy1_core_clkctrl = 0x4a008640,
+
+	/* cm2.core */
+	.cm_l3_1_clkstctrl = 0x4a008700,
+	.cm_l3_1_dynamicdep = 0x4a008708,
+	.cm_l3_1_l3_1_clkctrl = 0x4a008720,
+	.cm_l3_2_clkstctrl = 0x4a008800,
+	.cm_l3_2_dynamicdep = 0x4a008808,
+	.cm_l3_2_l3_2_clkctrl = 0x4a008820,
+	.cm_l3_gpmc_clkctrl = 0x4a008828,
+	.cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+	.cm_mpu_m3_clkstctrl = 0x4a008900,
+	.cm_mpu_m3_staticdep = 0x4a008904,
+	.cm_mpu_m3_dynamicdep = 0x4a008908,
+	.cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+	.cm_sdma_clkstctrl = 0x4a008a00,
+	.cm_sdma_staticdep = 0x4a008a04,
+	.cm_sdma_dynamicdep = 0x4a008a08,
+	.cm_sdma_sdma_clkctrl = 0x4a008a20,
+	.cm_memif_clkstctrl = 0x4a008b00,
+	.cm_memif_dmm_clkctrl = 0x4a008b20,
+	.cm_memif_emif_fw_clkctrl = 0x4a008b28,
+	.cm_memif_emif_1_clkctrl = 0x4a008b30,
+	.cm_memif_emif_2_clkctrl = 0x4a008b38,
+	.cm_memif_dll_clkctrl = 0x4a008b40,
+	.cm_memif_emif_h1_clkctrl = 0x4a008b50,
+	.cm_memif_emif_h2_clkctrl = 0x4a008b58,
+	.cm_memif_dll_h_clkctrl = 0x4a008b60,
+	.cm_c2c_clkstctrl = 0x4a008c00,
+	.cm_c2c_staticdep = 0x4a008c04,
+	.cm_c2c_dynamicdep = 0x4a008c08,
+	.cm_c2c_sad2d_clkctrl = 0x4a008c20,
+	.cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+	.cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+	.cm_l4cfg_clkstctrl = 0x4a008d00,
+	.cm_l4cfg_dynamicdep = 0x4a008d08,
+	.cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+	.cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+	.cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+	.cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+	.cm_l3instr_clkstctrl = 0x4a008e00,
+	.cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+	.cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+	.cm_l3instr_intrconn_wp1_clkct = 0x4a008e40,
+	.cm_ivahd_clkstctrl = 0x4a008f00,
+
+	/* cm2.ivahd */
+	.cm_ivahd_ivahd_clkctrl = 0x4a008f20,
+	.cm_ivahd_sl2_clkctrl = 0x4a008f28,
+
+	/* cm2.cam */
+	.cm_cam_clkstctrl = 0x4a009000,
+	.cm_cam_iss_clkctrl = 0x4a009020,
+	.cm_cam_fdif_clkctrl = 0x4a009028,
+
+	/* cm2.dss */
+	.cm_dss_clkstctrl = 0x4a009100,
+	.cm_dss_dss_clkctrl = 0x4a009120,
+
+	/* cm2.sgx */
+	.cm_sgx_clkstctrl = 0x4a009200,
+	.cm_sgx_sgx_clkctrl = 0x4a009220,
+
+	/* cm2.l3init */
+	.cm_l3init_clkstctrl = 0x4a009300,
+	.cm_l3init_hsmmc1_clkctrl = 0x4a009328,
+	.cm_l3init_hsmmc2_clkctrl = 0x4a009330,
+	.cm_l3init_hsi_clkctrl = 0x4a009338,
+	.cm_l3init_hsusbhost_clkctrl = 0x4a009358,
+	.cm_l3init_hsusbotg_clkctrl = 0x4a009360,
+	.cm_l3init_hsusbtll_clkctrl = 0x4a009368,
+	.cm_l3init_p1500_clkctrl = 0x4a009378,
+	.cm_l3init_fsusb_clkctrl = 0x4a0093d0,
+	.cm_l3init_usbphy_clkctrl = 0x4a0093e0,
+
+	/* cm2.l4per */
+	.cm_l4per_clkstctrl = 0x4a009400,
+	.cm_l4per_dynamicdep = 0x4a009408,
+	.cm_l4per_adc_clkctrl = 0x4a009420,
+	.cm_l4per_gptimer10_clkctrl = 0x4a009428,
+	.cm_l4per_gptimer11_clkctrl = 0x4a009430,
+	.cm_l4per_gptimer2_clkctrl = 0x4a009438,
+	.cm_l4per_gptimer3_clkctrl = 0x4a009440,
+	.cm_l4per_gptimer4_clkctrl = 0x4a009448,
+	.cm_l4per_gptimer9_clkctrl = 0x4a009450,
+	.cm_l4per_elm_clkctrl = 0x4a009458,
+	.cm_l4per_gpio2_clkctrl = 0x4a009460,
+	.cm_l4per_gpio3_clkctrl = 0x4a009468,
+	.cm_l4per_gpio4_clkctrl = 0x4a009470,
+	.cm_l4per_gpio5_clkctrl = 0x4a009478,
+	.cm_l4per_gpio6_clkctrl = 0x4a009480,
+	.cm_l4per_hdq1w_clkctrl = 0x4a009488,
+	.cm_l4per_hecc1_clkctrl = 0x4a009490,
+	.cm_l4per_hecc2_clkctrl = 0x4a009498,
+	.cm_l4per_i2c1_clkctrl = 0x4a0094a0,
+	.cm_l4per_i2c2_clkctrl = 0x4a0094a8,
+	.cm_l4per_i2c3_clkctrl = 0x4a0094b0,
+	.cm_l4per_i2c4_clkctrl = 0x4a0094b8,
+	.cm_l4per_l4per_clkctrl = 0x4a0094c0,
+	.cm_l4per_mcasp2_clkctrl = 0x4a0094d0,
+	.cm_l4per_mcasp3_clkctrl = 0x4a0094d8,
+	.cm_l4per_mcbsp4_clkctrl = 0x4a0094e0,
+	.cm_l4per_mgate_clkctrl = 0x4a0094e8,
+	.cm_l4per_mcspi1_clkctrl = 0x4a0094f0,
+	.cm_l4per_mcspi2_clkctrl = 0x4a0094f8,
+	.cm_l4per_mcspi3_clkctrl = 0x4a009500,
+	.cm_l4per_mcspi4_clkctrl = 0x4a009508,
+	.cm_l4per_mmcsd3_clkctrl = 0x4a009520,
+	.cm_l4per_mmcsd4_clkctrl = 0x4a009528,
+	.cm_l4per_msprohg_clkctrl = 0x4a009530,
+	.cm_l4per_slimbus2_clkctrl = 0x4a009538,
+	.cm_l4per_uart1_clkctrl = 0x4a009540,
+	.cm_l4per_uart2_clkctrl = 0x4a009548,
+	.cm_l4per_uart3_clkctrl = 0x4a009550,
+	.cm_l4per_uart4_clkctrl = 0x4a009558,
+	.cm_l4per_mmcsd5_clkctrl = 0x4a009560,
+	.cm_l4per_i2c5_clkctrl = 0x4a009568,
+	.cm_l4sec_clkstctrl = 0x4a009580,
+	.cm_l4sec_staticdep = 0x4a009584,
+	.cm_l4sec_dynamicdep = 0x4a009588,
+	.cm_l4sec_aes1_clkctrl = 0x4a0095a0,
+	.cm_l4sec_aes2_clkctrl = 0x4a0095a8,
+	.cm_l4sec_des3des_clkctrl = 0x4a0095b0,
+	.cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8,
+	.cm_l4sec_rng_clkctrl = 0x4a0095c0,
+	.cm_l4sec_sha2md51_clkctrl = 0x4a0095c8,
+	.cm_l4sec_cryptodma_clkctrl = 0x4a0095d8,
+
+	/* l4 wkup regs */
+	.cm_abe_pll_ref_clksel = 0x4a30610c,
+	.cm_sys_clksel = 0x4a306110,
+	.cm_wkup_clkstctrl = 0x4a307800,
+	.cm_wkup_l4wkup_clkctrl = 0x4a307820,
+	.cm_wkup_wdtimer1_clkctrl = 0x4a307828,
+	.cm_wkup_wdtimer2_clkctrl = 0x4a307830,
+	.cm_wkup_gpio1_clkctrl = 0x4a307838,
+	.cm_wkup_gptimer1_clkctrl = 0x4a307840,
+	.cm_wkup_gptimer12_clkctrl = 0x4a307848,
+	.cm_wkup_synctimer_clkctrl = 0x4a307850,
+	.cm_wkup_usim_clkctrl = 0x4a307858,
+	.cm_wkup_sarram_clkctrl = 0x4a307860,
+	.cm_wkup_keyboard_clkctrl = 0x4a307878,
+	.cm_wkup_rtc_clkctrl = 0x4a307880,
+	.cm_wkup_bandgap_clkctrl = 0x4a307888,
+	.prm_vc_val_bypass = 0x4a307ba0,
+	.prm_vc_cfg_channel = 0x4a307ba4,
+	.prm_vc_cfg_i2c_mode = 0x4a307ba8,
+	.prm_vc_cfg_i2c_clk = 0x4a307bac,
+};
+
+struct omap_sys_ctrl_regs const omap4_ctrl = {
+	.control_status				= 0x4A0022C4,
+	.control_std_fuse_die_id_0		= 0x4A002200,
+	.control_std_fuse_die_id_1		= 0x4A002208,
+	.control_std_fuse_die_id_2		= 0x4A00220C,
+	.control_std_fuse_die_id_3		= 0x4A002210,
+	.control_std_fuse_opp_bgap		= 0x4a002260,
+	.control_status				= 0x4a0022c4,
+	.control_ldosram_iva_voltage_ctrl	= 0x4A002320,
+	.control_ldosram_mpu_voltage_ctrl	= 0x4A002324,
+	.control_ldosram_core_voltage_ctrl	= 0x4A002328,
+	.control_usbotghs_ctrl			= 0x4A00233C,
+	.control_padconf_core_base		= 0x4A100000,
+	.control_pbiaslite			= 0x4A100600,
+	.control_lpddr2io1_0			= 0x4A100638,
+	.control_lpddr2io1_1			= 0x4A10063C,
+	.control_lpddr2io1_2			= 0x4A100640,
+	.control_lpddr2io1_3			= 0x4A100644,
+	.control_lpddr2io2_0			= 0x4A100648,
+	.control_lpddr2io2_1			= 0x4A10064C,
+	.control_lpddr2io2_2			= 0x4A100650,
+	.control_lpddr2io2_3			= 0x4A100654,
+	.control_efuse_1			= 0x4A100700,
+	.control_efuse_2			= 0x4A100704,
+	.control_padconf_wkup_base		= 0x4A31E000,
+};
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap4/sdram_elpida.c b/roms/u-boot/arch/arm/mach-omap2/omap4/sdram_elpida.c
new file mode 100644
index 000000000..2a18cf021
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap4/sdram_elpida.c
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Timing and Organization details of the Elpida parts used in OMAP4
+ * SDPs and Panda
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * This file provides details of the LPDDR2 SDRAM parts used on OMAP4430
+ * SDP and Panda. Since the parts used and geometry are identical for
+ * SDP and Panda for a given OMAP4 revision, this information is kept
+ * here instead of being in board directory. However the key functions
+ * exported are weakly linked so that they can be over-ridden in the board
+ * directory if there is a OMAP4 board in the future that uses a different
+ * memory device or geometry.
+ *
+ * For any new board with different memory devices over-ride one or more
+ * of the following functions as per the CONFIG flags you intend to enable:
+ * - emif_get_reg_dump()
+ * - emif_get_dmm_regs()
+ * - emif_get_device_details()
+ * - emif_get_device_timings()
+ */
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
+	.sdram_config_init		= 0x80000eb9,
+	.sdram_config			= 0x80001ab9,
+	.ref_ctrl			= 0x0000030c,
+	.sdram_tim1			= 0x08648311,
+	.sdram_tim2			= 0x101b06ca,
+	.sdram_tim3			= 0x0048a19f,
+	.read_idle_ctrl			= 0x000501ff,
+	.zq_config			= 0x500b3214,
+	.temp_alert_config		= 0xd8016893,
+	.emif_ddr_phy_ctlr_1_init	= 0x049ffff5,
+	.emif_ddr_phy_ctlr_1		= 0x049ff808
+};
+
+const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
+	.sdram_config_init		= 0x80000eb1,
+	.sdram_config			= 0x80001ab1,
+	.ref_ctrl			= 0x000005cd,
+	.sdram_tim1			= 0x10cb0622,
+	.sdram_tim2			= 0x20350d52,
+	.sdram_tim3			= 0x00b1431f,
+	.read_idle_ctrl			= 0x000501ff,
+	.zq_config			= 0x500b3214,
+	.temp_alert_config		= 0x58016893,
+	.emif_ddr_phy_ctlr_1_init	= 0x049ffff5,
+	.emif_ddr_phy_ctlr_1		= 0x049ff418
+};
+
+const struct emif_regs emif_regs_elpida_400_mhz_1cs = {
+	.sdram_config_init		= 0x80800eb2,
+	.sdram_config			= 0x80801ab2,
+	.ref_ctrl			= 0x00000618,
+	.sdram_tim1			= 0x10eb0662,
+	.sdram_tim2			= 0x20370dd2,
+	.sdram_tim3			= 0x00b1c33f,
+	.read_idle_ctrl			= 0x000501ff,
+	.zq_config			= 0x500b3215,
+	.temp_alert_config		= 0x58016893,
+	.emif_ddr_phy_ctlr_1_init	= 0x049ffff5,
+	.emif_ddr_phy_ctlr_1		= 0x049ff418
+};
+
+const struct emif_regs emif_regs_elpida_400_mhz_2cs = {
+	.sdram_config_init		= 0x80000eb9,
+	.sdram_config			= 0x80001ab9,
+	.ref_ctrl			= 0x00000618,
+	.sdram_tim1			= 0x10eb0662,
+	.sdram_tim2			= 0x20370dd2,
+	.sdram_tim3			= 0x00b1c33f,
+	.read_idle_ctrl			= 0x000501ff,
+	.zq_config			= 0xd00b3214,
+	.temp_alert_config		= 0xd8016893,
+	.emif_ddr_phy_ctlr_1_init	= 0x049ffff5,
+	.emif_ddr_phy_ctlr_1		= 0x049ff418
+};
+
+const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
+	.dmm_lisa_map_0 = 0xFF020100,
+	.dmm_lisa_map_1 = 0,
+	.dmm_lisa_map_2 = 0,
+	.dmm_lisa_map_3 = 0x80540300,
+	.is_ma_present	= 0x0
+};
+
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
+	.dmm_lisa_map_0 = 0xFF020100,
+	.dmm_lisa_map_1 = 0,
+	.dmm_lisa_map_2 = 0,
+	.dmm_lisa_map_3 = 0x80640300,
+	.is_ma_present	= 0x0
+};
+
+const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = {
+	.dmm_lisa_map_0 = 0xFF020100,
+	.dmm_lisa_map_1 = 0,
+	.dmm_lisa_map_2 = 0,
+	.dmm_lisa_map_3 = 0x80640300,
+	.is_ma_present	= 0x1
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+	u32 omap4_rev = omap_revision();
+
+	/* Same devices and geometry on both EMIFs */
+	if (omap4_rev == OMAP4430_ES1_0)
+		*regs = &emif_regs_elpida_380_mhz_1cs;
+	else if (omap4_rev == OMAP4430_ES2_0)
+		*regs = &emif_regs_elpida_200_mhz_2cs;
+	else if (omap4_rev < OMAP4470_ES1_0)
+		*regs = &emif_regs_elpida_400_mhz_2cs;
+	else
+		*regs = &emif_regs_elpida_400_mhz_1cs;
+}
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+	__attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+						**dmm_lisa_regs)
+{
+	u32 omap_rev = omap_revision();
+
+	if (omap_rev == OMAP4430_ES1_0)
+		*dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
+	else if (omap_rev < OMAP4460_ES1_0)
+		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+	else
+		*dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+	__attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+
+#else
+
+const struct lpddr2_device_details elpida_2G_S4_details = {
+	.type		= LPDDR2_TYPE_S4,
+	.density	= LPDDR2_DENSITY_2Gb,
+	.io_width	= LPDDR2_IO_WIDTH_32,
+	.manufacturer	= LPDDR2_MANUFACTURER_ELPIDA
+};
+
+const struct lpddr2_device_details elpida_4G_S4_details = {
+	.type		= LPDDR2_TYPE_S4,
+	.density	= LPDDR2_DENSITY_4Gb,
+	.io_width	= LPDDR2_IO_WIDTH_32,
+	.manufacturer	= LPDDR2_MANUFACTURER_ELPIDA
+};
+
+struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs,
+			struct lpddr2_device_details *lpddr2_dev_details)
+{
+	u32 omap_rev = omap_revision();
+
+	/* EMIF1 & EMIF2 have identical configuration */
+	if (((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0))
+		&& (cs == CS1)) {
+		/* Nothing connected on CS1 for 4430/4470 ES1.0 */
+		return NULL;
+	} else if (omap_rev < OMAP4470_ES1_0) {
+		/* In all other 4430/4460 cases Elpida 2G device */
+		*lpddr2_dev_details = elpida_2G_S4_details;
+	} else {
+		/* 4470: 4G device */
+		*lpddr2_dev_details = elpida_4G_S4_details;
+	}
+	return lpddr2_dev_details;
+}
+
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+			struct lpddr2_device_details *lpddr2_dev_details)
+	__attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+static const struct lpddr2_ac_timings timings_elpida_400_mhz = {
+	.max_freq	= 400000000,
+	.RL		= 6,
+	.tRPab		= 21,
+	.tRCD		= 18,
+	.tWR		= 15,
+	.tRASmin	= 42,
+	.tRRD		= 10,
+	.tWTRx2		= 15,
+	.tXSR		= 140,
+	.tXPx2		= 15,
+	.tRFCab		= 130,
+	.tRTPx2		= 15,
+	.tCKE		= 3,
+	.tCKESR		= 15,
+	.tZQCS		= 90,
+	.tZQCL		= 360,
+	.tZQINIT	= 1000,
+	.tDQSCKMAXx2	= 11,
+	.tRASmax	= 70,
+	.tFAW		= 50
+};
+
+static const struct lpddr2_ac_timings timings_elpida_333_mhz = {
+	.max_freq	= 333000000,
+	.RL		= 5,
+	.tRPab		= 21,
+	.tRCD		= 18,
+	.tWR		= 15,
+	.tRASmin	= 42,
+	.tRRD		= 10,
+	.tWTRx2		= 15,
+	.tXSR		= 140,
+	.tXPx2		= 15,
+	.tRFCab		= 130,
+	.tRTPx2		= 15,
+	.tCKE		= 3,
+	.tCKESR		= 15,
+	.tZQCS		= 90,
+	.tZQCL		= 360,
+	.tZQINIT	= 1000,
+	.tDQSCKMAXx2	= 11,
+	.tRASmax	= 70,
+	.tFAW		= 50
+};
+
+static const struct lpddr2_ac_timings timings_elpida_200_mhz = {
+	.max_freq	= 200000000,
+	.RL		= 3,
+	.tRPab		= 21,
+	.tRCD		= 18,
+	.tWR		= 15,
+	.tRASmin	= 42,
+	.tRRD		= 10,
+	.tWTRx2		= 20,
+	.tXSR		= 140,
+	.tXPx2		= 15,
+	.tRFCab		= 130,
+	.tRTPx2		= 15,
+	.tCKE		= 3,
+	.tCKESR		= 15,
+	.tZQCS		= 90,
+	.tZQCL		= 360,
+	.tZQINIT	= 1000,
+	.tDQSCKMAXx2	= 11,
+	.tRASmax	= 70,
+	.tFAW		= 50
+};
+
+static const struct lpddr2_min_tck min_tck_elpida = {
+	.tRL		= 3,
+	.tRP_AB		= 3,
+	.tRCD		= 3,
+	.tWR		= 3,
+	.tRAS_MIN	= 3,
+	.tRRD		= 2,
+	.tWTR		= 2,
+	.tXP		= 2,
+	.tRTP		= 2,
+	.tCKE		= 3,
+	.tCKESR		= 3,
+	.tFAW		= 8
+};
+
+static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
+		&timings_elpida_200_mhz,
+		&timings_elpida_333_mhz,
+		&timings_elpida_400_mhz
+};
+
+const struct lpddr2_device_timings elpida_2G_S4_timings = {
+	.ac_timings	= elpida_ac_timings,
+	.min_tck	= &min_tck_elpida,
+};
+
+void emif_get_device_timings_sdp(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	u32 omap_rev = omap_revision();
+
+	/* Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &elpida_2G_S4_timings;
+
+	if ((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0))
+		*cs1_device_timings = NULL;
+	else
+		*cs1_device_timings = &elpida_2G_S4_timings;
+}
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+	__attribute__((weak, alias("emif_get_device_timings_sdp")));
+
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
+
+const struct lpddr2_mr_regs mr_regs = {
+	.mr1	= MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3,
+	.mr2	= 0x4,
+	.mr3	= -1,
+	.mr10	= MR10_ZQ_ZQINIT,
+	.mr16	= MR16_REF_FULL_ARRAY
+};
+
+void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
+{
+	*regs = &mr_regs;
+}
+
+__weak const struct read_write_regs *get_bug_regs(u32 *iterations)
+{
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/Kconfig b/roms/u-boot/arch/arm/mach-omap2/omap5/Kconfig
new file mode 100644
index 000000000..4c2f990b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/Kconfig
@@ -0,0 +1,164 @@
+if OMAP54XX
+
+config DRA7XX
+	bool
+	help
+	  DRA7xx is an OMAP based SOC with Dual Core A-15s.
+
+choice
+	prompt "OMAP5 board select"
+	optional
+
+config TARGET_CM_T54
+	bool "CompuLab CM-T54"
+
+config TARGET_OMAP5_UEVM
+	bool "TI OMAP5 uEVM board"
+
+config TARGET_DRA7XX_EVM
+	bool "TI DRA7XX"
+	select BOARD_LATE_INIT
+	select DRA7XX
+	select PHYS_64BIT
+	select TI_I2C_BOARD_DETECT
+	imply DM_PMIC
+	imply DM_REGULATOR
+	imply DM_REGULATOR_LP87565
+	imply DM_THERMAL
+	imply PMIC_LP87565
+	imply SCSI
+	imply SPL_THERMAL
+	imply TI_DRA7_THERMAL
+
+config TARGET_AM57XX_EVM
+	bool "AM57XX"
+	select BOARD_LATE_INIT
+	select CMD_DDR3
+	select DRA7XX
+	select TI_I2C_BOARD_DETECT
+	select SUPPORT_EXTENSION_SCAN
+	imply DM_THERMAL
+	imply SCSI
+	imply SPL_THERMAL
+	imply TI_DRA7_THERMAL
+
+endchoice
+
+config SYS_SOC
+	default "omap5"
+
+config OMAP_PLATFORM_RESET_TIME_MAX_USEC
+	int "Something"
+	range 0  31219
+	default 31219
+	help
+	  Most OMAPs' provide a way to specify the time for which the reset
+	  should be held low while the voltages and Oscillator outputs
+	  stabilize.
+	  This time is mostly board and PMIC dependent. Hence the boards are
+	  expected to specify a pre-computed time using the above option.
+	  This value can be computed using a summation of the below 3
+	  parameters
+	  1: Time taken by the Osciallator to stop and restart
+	  2: PMIC OTP time
+	  3: Voltage ramp time, which can be derived using the PMIC slew rate
+	     and value of voltage ramp needed.
+
+if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM
+menu "Voltage Domain OPP selections"
+
+choice
+	prompt "MPU Voltage Domain"
+	default DRA7_MPU_OPP_NOM
+        help
+	  Select the Operating Performance Point(OPP) for the MPU voltage
+	  domain on DRA7xx & AM57xx SoCs.
+
+config DRA7_MPU_OPP_NOM
+	bool "OPP NOM"
+	help
+	  This config option enables Normal OPP for MPU. This is the safest
+	  option for booting.
+
+endchoice
+
+choice
+	prompt "DSPEVE Voltage Domain"
+        help
+	  Select the Operating Performance Point(OPP) for the DSPEVE voltage
+	  domain on DRA7xx & AM57xx SoCs.
+
+config DRA7_DSPEVE_OPP_NOM
+	bool "OPP NOM"
+	help
+	  This config option enables Normal OPP for DSPEVE. This is the safest
+	  option for booting and choose this when unsure about other OPPs .
+
+config DRA7_DSPEVE_OPP_OD
+	bool "OPP OD"
+	help
+	  This config option enables Over drive OPP for DSPEVE.
+
+config DRA7_DSPEVE_OPP_HIGH
+	bool "OPP HIGH"
+	help
+	  This config option enables High OPP for DSPEVE.
+
+endchoice
+
+choice
+	prompt "IVA Voltage Domain"
+        help
+	  Select the Operating Performance Point(OPP) for the IVA voltage
+	  domain on DRA7xx & AM57xx SoCs.
+
+config DRA7_IVA_OPP_NOM
+	bool "OPP NOM"
+	help
+	  This config option enables Normal OPP for IVA. This is the safest
+	  option for booting and choose this when unsure about other OPPs .
+
+config DRA7_IVA_OPP_OD
+	bool "OPP OD"
+	help
+	  This config option enables Over drive OPP for IVA.
+
+config DRA7_IVA_OPP_HIGH
+	bool "OPP HIGH"
+	help
+	  This config option enables High OPP for IVA.
+
+endchoice
+
+choice
+	prompt "GPU Voltage Domain"
+        help
+	  Select the Operating Performance Point(OPP) for the GPU voltage
+	  domain on DRA7xx & AM57xx SoCs.
+
+config DRA7_GPU_OPP_NOM
+	bool "OPP NOM"
+	help
+	  This config option enables Normal OPP for GPU. This is the safest
+	  option for booting and choose this when unsure about other OPPs .
+
+config DRA7_GPU_OPP_OD
+	bool "OPP OD"
+	help
+	  This config option enables Over drive OPP for GPU.
+
+config DRA7_GPU_OPP_HIGH
+	bool "OPP HIGH"
+	help
+	  This config option enables High OPP for GPU.
+
+endchoice
+
+endmenu
+endif
+
+source "board/ti/omap5_uevm/Kconfig"
+source "board/ti/dra7xx/Kconfig"
+source "board/ti/am57xx/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/Makefile b/roms/u-boot/arch/arm/mach-omap2/omap5/Makefile
new file mode 100644
index 000000000..592e026ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2010
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	+= boot.o
+obj-y	+= hwinit.o
+obj-y	+= emif.o
+obj-y	+= sdram.o
+obj-y	+= prcm-regs.o
+obj-y	+= hw_data.o
+obj-y	+= abb.o
+obj-y	+= fdt.o
+obj-$(CONFIG_IODELAY_RECALIBRATION) += dra7xx_iodelay.o
+obj-$(CONFIG_DRA7XX) += sec_entry_cpu1.o
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/abb.c b/roms/u-boot/arch/arm/mach-omap2/omap5/abb.c
new file mode 100644
index 000000000..2f9f8e65d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/abb.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Adaptive Body Bias programming sequence for OMAP5 family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+
+/*
+ * Setup LDOVBB for OMAP5.
+ * On OMAP5+ some ABB settings are fused. They are handled
+ * in the following way:
+ *
+ * 1. corresponding EFUSE register contains ABB enable bit
+ *    and VSET value
+ * 2. If ABB enable bit is set to 1, than ABB should be
+ *    enabled, otherwise ABB should be disabled
+ * 3. If ABB is enabled, than VSET value should be copied
+ *    to corresponding MUX control register
+ */
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+	u32 vset;
+	u32 fuse_enable_mask = OMAP5_PROD_ABB_FUSE_ENABLE_MASK;
+	u32 fuse_vset_mask = OMAP5_PROD_ABB_FUSE_VSET_MASK;
+
+	if (!is_omap54xx()) {
+		/* DRA7 */
+		fuse_enable_mask = DRA7_ABB_FUSE_ENABLE_MASK;
+		fuse_vset_mask = DRA7_ABB_FUSE_VSET_MASK;
+	}
+	/*
+	 * ABB parameters must be properly fused
+	 * otherwise ABB should be disabled
+	 */
+	vset = readl(fuse);
+	if (!(vset & fuse_enable_mask))
+		return -1;
+
+	/* prepare VSET value for LDOVBB mux register */
+	vset &= fuse_vset_mask;
+	vset >>= ffs(fuse_vset_mask) - 1;
+	vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
+	vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
+
+	/* setup LDOVBB using fused value */
+	clrsetbits_le32(ldovbb,  OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/boot.c b/roms/u-boot/arch/arm/mach-omap2/omap5/boot.c
new file mode 100644
index 000000000..15d6836c6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/boot.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OMAP5 boot
+ *
+ * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/omap_common.h>
+#include <spl.h>
+
+static u32 boot_devices[] = {
+#if defined(CONFIG_DRA7XX)
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_SATA,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_SPI,
+	BOOT_DEVICE_SPI,
+#else
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_SATA,
+	BOOT_DEVICE_XIP,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_XIPWAIT,
+#endif
+};
+
+u32 omap_sys_boot_device(void)
+{
+	u32 sys_boot;
+
+	/* Grab the first 4 bits of the status register for SYS_BOOT. */
+	sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 4) - 1);
+
+	if (sys_boot >= (sizeof(boot_devices) / sizeof(u32)))
+		return BOOT_DEVICE_NONE;
+
+	return boot_devices[sys_boot];
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c b/roms/u-boot/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c
new file mode 100644
index 000000000..8569eff31
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <log.h>
+#include <asm/utils.h>
+#include <asm/arch/dra7xx_iodelay.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mux_dra7xx.h>
+#include <asm/omap_common.h>
+
+static int isolate_io(u32 isolate)
+{
+	if (isolate) {
+		clrsetbits_le32((*ctrl)->control_pbias, SDCARD_PWRDNZ,
+				SDCARD_PWRDNZ);
+		clrsetbits_le32((*ctrl)->control_pbias, SDCARD_BIAS_PWRDNZ,
+				SDCARD_BIAS_PWRDNZ);
+	}
+
+	/* Override control on ISOCLKIN signal to IO pad ring. */
+	clrsetbits_le32((*prcm)->prm_io_pmctrl, PMCTRL_ISOCLK_OVERRIDE_MASK,
+			PMCTRL_ISOCLK_OVERRIDE_CTRL);
+	if (!wait_on_value(PMCTRL_ISOCLK_STATUS_MASK, PMCTRL_ISOCLK_STATUS_MASK,
+			   (u32 *)(*prcm)->prm_io_pmctrl, LDELAY))
+		return ERR_DEISOLATE_IO << isolate;
+
+	/* Isolate/Deisolate IO */
+	clrsetbits_le32((*ctrl)->ctrl_core_sma_sw_0, CTRL_ISOLATE_MASK,
+			isolate << CTRL_ISOLATE_SHIFT);
+	/* Dummy read to add delay t > 10ns */
+	readl((*ctrl)->ctrl_core_sma_sw_0);
+
+	/* Return control on ISOCLKIN to hardware */
+	clrsetbits_le32((*prcm)->prm_io_pmctrl, PMCTRL_ISOCLK_OVERRIDE_MASK,
+			PMCTRL_ISOCLK_NOT_OVERRIDE_CTRL);
+	if (!wait_on_value(PMCTRL_ISOCLK_STATUS_MASK,
+			   0 << PMCTRL_ISOCLK_STATUS_SHIFT,
+			   (u32 *)(*prcm)->prm_io_pmctrl, LDELAY))
+		return ERR_DEISOLATE_IO << isolate;
+
+	return 0;
+}
+
+static int calibrate_iodelay(u32 base)
+{
+	u32 reg;
+
+	/* Configure REFCLK period */
+	reg = readl(base + CFG_REG_2_OFFSET);
+	reg &= ~CFG_REG_REFCLK_PERIOD_MASK;
+	reg |= CFG_REG_REFCLK_PERIOD;
+	writel(reg, base + CFG_REG_2_OFFSET);
+
+	/* Initiate Calibration */
+	clrsetbits_le32(base + CFG_REG_0_OFFSET, CFG_REG_CALIB_STRT_MASK,
+			CFG_REG_CALIB_STRT << CFG_REG_CALIB_STRT_SHIFT);
+	if (!wait_on_value(CFG_REG_CALIB_STRT_MASK, CFG_REG_CALIB_END,
+			   (u32 *)(base + CFG_REG_0_OFFSET), LDELAY))
+		return ERR_CALIBRATE_IODELAY;
+
+	return 0;
+}
+
+static int update_delay_mechanism(u32 base)
+{
+	/* Initiate the reload of calibrated values. */
+	clrsetbits_le32(base + CFG_REG_0_OFFSET, CFG_REG_ROM_READ_MASK,
+			CFG_REG_ROM_READ_START);
+	if (!wait_on_value(CFG_REG_ROM_READ_MASK, CFG_REG_ROM_READ_END,
+			   (u32 *)(base + CFG_REG_0_OFFSET), LDELAY))
+		return ERR_UPDATE_DELAY;
+
+	return 0;
+}
+
+static u32 calculate_delay(u32 base, u16 offset, u16 den)
+{
+	u16 refclk_period, dly_cnt, ref_cnt;
+	u32 reg, q, r;
+
+	refclk_period = readl(base + CFG_REG_2_OFFSET) &
+			      CFG_REG_REFCLK_PERIOD_MASK;
+
+	reg = readl(base + offset);
+	dly_cnt = (reg & CFG_REG_DLY_CNT_MASK) >> CFG_REG_DLY_CNT_SHIFT;
+	ref_cnt = (reg & CFG_REG_REF_CNT_MASK) >> CFG_REG_REF_CNT_SHIFT;
+
+	if (!dly_cnt || !den)
+		return 0;
+
+	/*
+	 * To avoid overflow and integer truncation, delay value
+	 * is calculated as quotient + remainder.
+	 */
+	q = 5 * ((ref_cnt * refclk_period) / (dly_cnt * den));
+	r = (10 * ((ref_cnt * refclk_period) % (dly_cnt * den))) /
+		(2 * dly_cnt * den);
+
+	return q + r;
+}
+
+static u32 get_cfg_reg(u16 a_delay, u16 g_delay, u32 cpde, u32 fpde)
+{
+	u32 g_delay_coarse, g_delay_fine;
+	u32 a_delay_coarse, a_delay_fine;
+	u32 c_elements, f_elements;
+	u32 total_delay, reg = 0;
+
+	g_delay_coarse = g_delay / 920;
+	g_delay_fine = ((g_delay % 920) * 10) / 60;
+
+	a_delay_coarse = a_delay / cpde;
+	a_delay_fine = ((a_delay % cpde) * 10) / fpde;
+
+	c_elements = g_delay_coarse + a_delay_coarse;
+	f_elements = (g_delay_fine + a_delay_fine) / 10;
+
+	if (f_elements > 22) {
+		total_delay = c_elements * cpde + f_elements * fpde;
+
+		c_elements = total_delay / cpde;
+		f_elements = (total_delay % cpde) / fpde;
+	}
+
+	reg = (c_elements << CFG_X_COARSE_DLY_SHIFT) & CFG_X_COARSE_DLY_MASK;
+	reg |= (f_elements << CFG_X_FINE_DLY_SHIFT) & CFG_X_FINE_DLY_MASK;
+	reg |= CFG_X_SIGNATURE << CFG_X_SIGNATURE_SHIFT;
+	reg |= CFG_X_LOCK << CFG_X_LOCK_SHIFT;
+
+	return reg;
+}
+
+int do_set_iodelay(u32 base, struct iodelay_cfg_entry const *array,
+		   int niodelays)
+{
+	struct iodelay_cfg_entry *iodelay = (struct iodelay_cfg_entry *)array;
+	u32 reg, cpde, fpde, i;
+
+	if (!niodelays)
+		return 0;
+
+	cpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_3_OFFSET,
+			       88);
+	if (!cpde)
+		return ERR_CPDE;
+
+	fpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_4_OFFSET,
+			       264);
+	if (!fpde)
+		return ERR_FPDE;
+
+	for (i = 0; i < niodelays; i++, iodelay++) {
+		reg = get_cfg_reg(iodelay->a_delay, iodelay->g_delay, cpde,
+				  fpde);
+		writel(reg, base + iodelay->offset);
+	}
+
+	return 0;
+}
+
+int __recalibrate_iodelay_start(void)
+{
+	int ret = 0;
+
+	/* IO recalibration should be done only from SRAM */
+	if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) {
+		puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n");
+		return -1;
+	}
+
+	/* unlock IODELAY CONFIG registers */
+	writel(CFG_IODELAY_UNLOCK_KEY, (*ctrl)->iodelay_config_base +
+	       CFG_REG_8_OFFSET);
+
+	ret = calibrate_iodelay((*ctrl)->iodelay_config_base);
+	if (ret)
+		goto err;
+
+	ret = isolate_io(ISOLATE_IO);
+	if (ret)
+		goto err;
+
+	ret = update_delay_mechanism((*ctrl)->iodelay_config_base);
+
+err:
+	return ret;
+}
+
+void __recalibrate_iodelay_end(int ret)
+{
+
+	/* IO recalibration should be done only from SRAM */
+	if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) {
+		puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n");
+		return;
+	}
+
+	/* Deisolate IO if it is already isolated */
+	if (readl((*ctrl)->ctrl_core_sma_sw_0) & CTRL_ISOLATE_MASK)
+		isolate_io(DEISOLATE_IO);
+
+	/* lock IODELAY CONFIG registers */
+	writel(CFG_IODELAY_LOCK_KEY, (*ctrl)->iodelay_config_base +
+	       CFG_REG_8_OFFSET);
+
+	/*
+	 * UART cannot be used during IO recalibration sequence as IOs are in
+	 * isolation. So error handling and debug prints are done after
+	 * complete IO delay recalibration sequence
+	 */
+	switch (ret) {
+	case ERR_CALIBRATE_IODELAY:
+		puts("IODELAY: IO delay calibration sequence failed\n");
+		break;
+	case ERR_ISOLATE_IO:
+		puts("IODELAY: Isolation of Device IOs failed\n");
+		break;
+	case ERR_UPDATE_DELAY:
+		puts("IODELAY: Delay mechanism update with new calibrated values failed\n");
+		break;
+	case ERR_DEISOLATE_IO:
+		puts("IODELAY: De-isolation of Device IOs failed\n");
+		break;
+	case ERR_CPDE:
+		puts("IODELAY: CPDE calculation failed\n");
+		break;
+	case ERR_FPDE:
+		puts("IODELAY: FPDE calculation failed\n");
+		break;
+	case -1:
+		puts("IODELAY: Wrong Context call?\n");
+		break;
+	default:
+		debug("IODELAY: IO delay recalibration successfully completed\n");
+	}
+
+	/* If there is an error during iodelay recalibration, SoC is in a bad
+	 * state. Do not progress any further.
+	 */
+	if (ret)
+		hang();
+
+	return;
+}
+
+void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+			   struct iodelay_cfg_entry const *iodelay,
+			   int niodelays)
+{
+	int ret = 0;
+
+	/* IO recalibration should be done only from SRAM */
+	if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) {
+		puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n");
+		return;
+	}
+
+	ret = __recalibrate_iodelay_start();
+	if (ret)
+		goto err;
+
+	/* Configure Mux settings */
+	do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads);
+
+	/* Configure Manual IO timing modes */
+	ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays);
+	if (ret)
+		goto err;
+
+err:
+	__recalibrate_iodelay_end(ret);
+
+}
+
+void late_recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+			      struct iodelay_cfg_entry const *iodelay,
+			      int niodelays)
+{
+	int ret = 0;
+
+	/* unlock IODELAY CONFIG registers */
+	writel(CFG_IODELAY_UNLOCK_KEY, (*ctrl)->iodelay_config_base +
+	       CFG_REG_8_OFFSET);
+
+	ret = calibrate_iodelay((*ctrl)->iodelay_config_base);
+	if (ret)
+		goto err;
+
+	ret = update_delay_mechanism((*ctrl)->iodelay_config_base);
+
+	/* Configure Mux settings */
+	do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads);
+
+	/* Configure Manual IO timing modes */
+	ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays);
+	if (ret)
+		goto err;
+
+err:
+	/* lock IODELAY CONFIG registers */
+	writel(CFG_IODELAY_LOCK_KEY, (*ctrl)->iodelay_config_base +
+	       CFG_REG_8_OFFSET);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/emif.c b/roms/u-boot/arch/arm/mach-omap2/omap5/emif.c
new file mode 100644
index 000000000..2de36b6fe
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/emif.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com> for OMAP4
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+static u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM;
+static u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+	.max_freq = 532000000,
+	.RL = 8,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 15,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+	.tRL = 3,
+	.tRP_AB = 3,
+	.tRCD = 3,
+	.tWR = 3,
+	.tRAS_MIN = 3,
+	.tRRD = 2,
+	.tWTR = 2,
+	.tXP = 2,
+	.tRTP = 2,
+	.tCKE = 3,
+	.tCKESR = 3,
+	.tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+			jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+	.ac_timings = jedec_ac_timings,
+	.min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Assume Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &jedec_default_timings;
+	*cs1_device_timings = NULL;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/fdt.c b/roms/u-boot/arch/arm/mach-omap2/omap5/fdt.c
new file mode 100644
index 000000000..c4162420f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/fdt.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Texas Instruments, Inc.
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <log.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#include <malloc.h>
+
+#include <asm/omap_common.h>
+#include <asm/arch-omap5/sys_proto.h>
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+
+/* Give zero values if not already defined */
+#ifndef TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ
+#define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ (0)
+#endif
+#ifndef CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ
+#define CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ (0)
+#endif
+
+static u32 hs_irq_skip[] = {
+	8,	/* Secure violation reporting interrupt */
+	15,	/* One interrupt for SDMA by secure world */
+	118	/* One interrupt for Crypto DMA by secure world */
+};
+
+static int ft_hs_fixup_crossbar(void *fdt, struct bd_info *bd)
+{
+	const char *path;
+	int offs;
+	int ret;
+	int len, i, old_cnt, new_cnt;
+	u32 *temp;
+	const u32 *p_data;
+
+	/*
+	 * Increase the size of the fdt
+	 * so we have some breathing room
+	 */
+	ret = fdt_increase_size(fdt, 512);
+	if (ret < 0) {
+		printf("Could not increase size of device tree: %s\n",
+		       fdt_strerror(ret));
+		return ret;
+	}
+
+	/* Reserve IRQs that are used/needed by secure world */
+	path = "/ocp/crossbar";
+	offs = fdt_path_offset(fdt, path);
+	if (offs < 0) {
+		debug("Node %s not found.\n", path);
+		return 0;
+	}
+
+	/* Get current entries */
+	p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len);
+	if (p_data)
+		old_cnt = len / sizeof(u32);
+	else
+		old_cnt = 0;
+
+	new_cnt = sizeof(hs_irq_skip) /
+				sizeof(hs_irq_skip[0]);
+
+	/* Create new/updated skip list for HS parts */
+	temp = malloc(sizeof(u32) * (old_cnt + new_cnt));
+	for (i = 0; i < new_cnt; i++)
+		temp[i] = cpu_to_fdt32(hs_irq_skip[i]);
+	for (i = 0; i < old_cnt; i++)
+		temp[i + new_cnt] = p_data[i];
+
+	/* Blow away old data and set new data */
+	fdt_delprop(fdt, offs, "ti,irqs-skip");
+	ret = fdt_setprop(fdt, offs, "ti,irqs-skip",
+			  temp,
+			  (old_cnt + new_cnt) * sizeof(u32));
+	free(temp);
+
+	/* Check if the update worked */
+	if (ret < 0) {
+		printf("Could not add ti,irqs-skip property to node %s: %s\n",
+		       path, fdt_strerror(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
+#if ((TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ != 0) || \
+    (CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ != 0))
+static int ft_hs_fixup_sram(void *fdt, struct bd_info *bd)
+{
+	const char *path;
+	int offs;
+	int ret;
+	u32 temp[2];
+
+	/*
+	 * Update SRAM reservations on secure devices. The OCMC RAM
+	 * is always reserved for secure use from the start of that
+	 * memory region
+	 */
+	path = "/ocp/ocmcram@40300000/sram-hs";
+	offs = fdt_path_offset(fdt, path);
+	if (offs < 0) {
+		debug("Node %s not found.\n", path);
+		return 0;
+	}
+
+	/* relative start offset */
+	temp[0] = cpu_to_fdt32(0);
+	/* reservation size */
+	temp[1] = cpu_to_fdt32(max(TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ,
+				   CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ));
+	fdt_delprop(fdt, offs, "reg");
+	ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32));
+	if (ret < 0) {
+		printf("Could not add reg property to node %s: %s\n",
+		       path, fdt_strerror(ret));
+		return ret;
+	}
+
+	return 0;
+}
+#else
+static int ft_hs_fixup_sram(void *fdt, struct bd_info *bd) { return 0; }
+#endif
+
+static void ft_hs_fixups(void *fdt, struct bd_info *bd)
+{
+	/* Check we are running on an HS/EMU device type */
+	if (GP_DEVICE != get_device_type()) {
+		if ((ft_hs_fixup_crossbar(fdt, bd) == 0) &&
+		    (ft_hs_disable_rng(fdt, bd) == 0) &&
+		    (ft_hs_fixup_sram(fdt, bd) == 0) &&
+		    (ft_hs_fixup_dram(fdt, bd) == 0) &&
+		    (ft_hs_add_tee(fdt, bd) == 0))
+			return;
+	} else {
+		printf("ERROR: Incorrect device type (GP) detected!");
+	}
+	/* Fixup failed or wrong device type */
+	hang();
+}
+#else
+static void ft_hs_fixups(void *fdt, struct bd_info *bd)
+{
+}
+#endif /* #ifdef CONFIG_TI_SECURE_DEVICE */
+
+#if defined(CONFIG_TARGET_DRA7XX_EVM) || defined(CONFIG_TARGET_AM57XX_EVM)
+#define OPP_DSP_CLK_NUM	3
+#define OPP_IVA_CLK_NUM	2
+#define OPP_GPU_CLK_NUM	2
+
+const char *dra7_opp_dsp_clk_names[OPP_DSP_CLK_NUM] = {
+	"dpll_dsp_ck",
+	"dpll_dsp_m2_ck",
+	"dpll_dsp_m3x2_ck",
+};
+
+const char *dra7_opp_iva_clk_names[OPP_IVA_CLK_NUM] = {
+	"dpll_iva_ck",
+	"dpll_iva_m2_ck",
+};
+
+const char *dra7_opp_gpu_clk_names[OPP_GPU_CLK_NUM] = {
+	"dpll_gpu_ck",
+	"dpll_gpu_m2_ck",
+};
+
+/* DSPEVE voltage domain */
+u32 dra7_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = {
+	{}, /*OPP_LOW */
+	{600000000, 600000000, 400000000}, /* OPP_NOM */
+	{700000000, 700000000, 466666667}, /* OPP_OD */
+	{750000000, 750000000, 500000000}, /* OPP_HIGH */
+};
+
+/* DSP clock rates on DRA76x ACD-package based SoCs */
+u32 dra76_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = {
+	{}, /* OPP_LOW */
+	{600000000, 600000000, 400000000}, /* OPP_NOM */
+	{700000000, 700000000, 466666667}, /* OPP_OD */
+	{850000000, 850000000, 566666667}, /* OPP_HIGH */
+};
+
+/* IVA voltage domain */
+u32 dra7_opp_iva_clk_rates[NUM_OPPS][OPP_IVA_CLK_NUM] = {
+	{}, /* OPP_LOW */
+	{1165000000, 388333334}, /* OPP_NOM */
+	{860000000, 430000000}, /* OPP_OD */
+	{1064000000, 532000000}, /* OPP_HIGH */
+};
+
+/* GPU voltage domain */
+u32 dra7_opp_gpu_clk_rates[NUM_OPPS][OPP_GPU_CLK_NUM] = {
+	{}, /* OPP_LOW */
+	{1277000000, 425666667}, /* OPP_NOM */
+	{1000000000, 500000000}, /* OPP_OD */
+	{1064000000, 532000000}, /* OPP_HIGH */
+};
+
+static int ft_fixup_clocks(void *fdt, const char **names, u32 *rates, int num)
+{
+	int offs, node_offs, ret, i;
+	uint32_t phandle;
+
+	offs = fdt_path_offset(fdt, "/ocp/interconnect@4a000000/segment@0/target-module@5000/cm_core_aon@0/clocks");
+	if (offs < 0)
+		offs = fdt_path_offset(fdt, "/ocp/l4@4a000000/cm_core_aon@5000/clocks");
+	if (offs < 0) {
+		debug("Could not find cm_core_aon clocks node path offset : %s\n",
+		      fdt_strerror(offs));
+		return offs;
+	}
+
+	for (i = 0; i < num; i++) {
+		node_offs = fdt_subnode_offset(fdt, offs, names[i]);
+		if (node_offs < 0) {
+			debug("Could not find clock sub-node %s: %s\n",
+			      names[i], fdt_strerror(node_offs));
+			return offs;
+		}
+
+		phandle = fdt_get_phandle(fdt, node_offs);
+		if (!phandle) {
+			debug("Could not find phandle for clock %s\n",
+			      names[i]);
+			return -1;
+		}
+
+		ret = fdt_setprop_u32(fdt, node_offs, "assigned-clocks",
+				      phandle);
+		if (ret < 0) {
+			debug("Could not add assigned-clocks property to clock node %s: %s\n",
+			      names[i], fdt_strerror(ret));
+			return ret;
+		}
+
+		ret = fdt_setprop_u32(fdt, node_offs, "assigned-clock-rates",
+				      rates[i]);
+		if (ret < 0) {
+			debug("Could not add assigned-clock-rates property to clock node %s: %s\n",
+			      names[i], fdt_strerror(ret));
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void ft_opp_clock_fixups(void *fdt, struct bd_info *bd)
+{
+	const char **clk_names;
+	u32 *clk_rates;
+	int ret;
+
+	if (!is_dra72x() && !is_dra7xx())
+		return;
+
+	/* fixup DSP clocks */
+	clk_names = dra7_opp_dsp_clk_names;
+	clk_rates = dra7_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)];
+	/* adjust for higher OPP_HIGH clock rate on DRA76xP/DRA77xP SoCs */
+	if (is_dra76x_acd())
+		clk_rates = dra76_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)];
+
+	ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_DSP_CLK_NUM);
+	if (ret) {
+		printf("ft_fixup_clocks failed for DSP voltage domain: %s\n",
+		       fdt_strerror(ret));
+		return;
+	}
+
+	/* fixup IVA clocks */
+	clk_names = dra7_opp_iva_clk_names;
+	clk_rates = dra7_opp_iva_clk_rates[get_voltrail_opp(VOLT_IVA)];
+	ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_IVA_CLK_NUM);
+	if (ret) {
+		printf("ft_fixup_clocks failed for IVA voltage domain: %s\n",
+		       fdt_strerror(ret));
+		return;
+	}
+
+	/* fixup GPU clocks */
+	clk_names = dra7_opp_gpu_clk_names;
+	clk_rates = dra7_opp_gpu_clk_rates[get_voltrail_opp(VOLT_GPU)];
+	ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_GPU_CLK_NUM);
+	if (ret) {
+		printf("ft_fixup_clocks failed for GPU voltage domain: %s\n",
+		       fdt_strerror(ret));
+		return;
+	}
+}
+#else
+static void ft_opp_clock_fixups(void *fdt, struct bd_info *bd) { }
+#endif /* CONFIG_TARGET_DRA7XX_EVM || CONFIG_TARGET_AM57XX_EVM */
+
+/*
+ * Place for general cpu/SoC FDT fixups. Board specific
+ * fixups should remain in the board files which is where
+ * this function should be called from.
+ */
+void ft_cpu_setup(void *fdt, struct bd_info *bd)
+{
+	ft_hs_fixups(fdt, bd);
+	ft_opp_clock_fixups(fdt, bd);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/hw_data.c b/roms/u-boot/arch/arm/mach-omap2/omap5/hw_data.c
new file mode 100644
index 000000000..fa4e27063
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/hw_data.c
@@ -0,0 +1,812 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * HW data initialization for OMAP5
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ */
+#include <common.h>
+#include <palmas.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clock.h>
+#include <asm/omap_gpio.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+
+struct prcm_regs const **prcm =
+			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
+struct dplls const **dplls_data =
+			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+struct vcores_data const **omap_vcores =
+		(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+	(struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
+
+/* OPP NOM FREQUENCY for ES1.0 */
+static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* OPP NOM FREQUENCY for OMAP5 ES2.0, and DRA7 ES1.0 */
+static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
+	{250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
+	{266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 16.8 MHz */
+	{277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 19.2 MHz */
+	{368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = {
+	{266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 16.8 MHz */
+	{277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 19.2 MHz */
+	{368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}		/* 38.4 MHz */
+};
+
+static const struct dpll_params
+		core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = {
+	{266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 12 MHz   */
+	{266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 20 MHz   */
+	{443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 16.8 MHz */
+	{277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 19.2 MHz */
+	{368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
+	{32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
+	{32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
+	{32, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 20 MHz   */
+	{160, 6, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz_dra76x[NUM_SYS_CLKS] = {
+	{32, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{96, 4, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 20 MHz   */
+	{160, 6, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
+	{1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = {
+	{1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz */
+	{208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+#endif
+
+/* ABE M & N values with 32K clock as source */
+#ifndef CONFIG_SYS_OMAP_ABE_SYSCK
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+#endif
+
+/* ABE M & N values with sysclk2(22.5792 MHz) as input */
+static const struct dpll_params
+		abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = {
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 20 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
+};
+
+static const struct dpll_params ddr_dpll_params_2664mhz[NUM_SYS_CLKS] = {
+	{111, 0, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{333, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{555, 6, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{555, 7, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{666, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{555, 15, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
+};
+
+static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
+	{266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
+};
+
+static const struct dpll_params gmac_dpll_params_2000mhz[NUM_SYS_CLKS] = {
+	{250, 2, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{250, 4, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{119, 1, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{625, 11, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{500, 12, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{625, 23, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},	/* 38.4 MHz */
+};
+
+struct dplls omap5_dplls_es1 = {
+	.mpu = mpu_dpll_params_800mhz,
+	.core = core_dpll_params_2128mhz_ddr532,
+	.per = per_dpll_params_768mhz,
+	.iva = iva_dpll_params_2330mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls omap5_dplls_es2 = {
+	.mpu = mpu_dpll_params_1ghz,
+	.core = core_dpll_params_2128mhz_ddr532_es2,
+	.per = per_dpll_params_768mhz_es2,
+	.iva = iva_dpll_params_2330mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
+struct dplls dra76x_dplls = {
+	.mpu = mpu_dpll_params_1ghz,
+	.core = core_dpll_params_2128mhz_dra7xx,
+	.per = per_dpll_params_768mhz_dra76x,
+	.abe = abe_dpll_params_sysclk2_361267khz,
+	.iva = iva_dpll_params_2330mhz_dra7xx,
+	.usb = usb_dpll_params_1920mhz,
+	.ddr =	ddr_dpll_params_2664mhz,
+	.gmac = gmac_dpll_params_2000mhz,
+};
+
+struct dplls dra7xx_dplls = {
+	.mpu = mpu_dpll_params_1ghz,
+	.core = core_dpll_params_2128mhz_dra7xx,
+	.per = per_dpll_params_768mhz_dra7xx,
+	.abe = abe_dpll_params_sysclk2_361267khz,
+	.iva = iva_dpll_params_2330mhz_dra7xx,
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = ddr_dpll_params_2128mhz,
+	.gmac = gmac_dpll_params_2000mhz,
+};
+
+struct dplls dra72x_dplls = {
+	.mpu = mpu_dpll_params_1ghz,
+	.core = core_dpll_params_2128mhz_dra7xx,
+	.per = per_dpll_params_768mhz_dra7xx,
+	.abe = abe_dpll_params_sysclk2_361267khz,
+	.iva = iva_dpll_params_2330mhz_dra7xx,
+	.usb = usb_dpll_params_1920mhz,
+	.ddr =	ddr_dpll_params_2664mhz,
+	.gmac = gmac_dpll_params_2000mhz,
+};
+
+struct pmic_data palmas = {
+	.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
+	.step = 10000, /* 10 mV represented in uV */
+	/*
+	 * Offset codes 1-6 all give the base voltage in Palmas
+	 * Offset code 0 switches OFF the SMPS
+	 */
+	.start_code = 6,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
+	.gpio_en = 0,
+};
+
+/* The TPS659038 and TPS65917 are software-compatible, use common struct */
+struct pmic_data tps659038 = {
+	.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
+	.step = 10000, /* 10 mV represented in uV */
+	/*
+	 * Offset codes 1-6 all give the base voltage in Palmas
+	 * Offset code 0 switches OFF the SMPS
+	 */
+	.start_code = 6,
+	.i2c_slave_addr	= TPS659038_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= gpi2c_init,
+	.pmic_write	= palmas_i2c_write_u8,
+	.gpio_en = 0,
+};
+
+/* The LP87565*/
+struct pmic_data lp87565 = {
+	.base_offset = LP873X_BUCK_BASE_VOLT_UV,
+	.step = 5000, /* 5 mV represented in uV */
+	/*
+	 * Offset codes 0 - 0x13 Invalid.
+	 * Offset codes 0x14 0x17 give 10mV steps
+	 * Offset codes 0x17 through 0x9D give 5mV steps
+	 * So let us start with our operating range from .73V
+	 */
+	.start_code = 0x17,
+	.i2c_slave_addr = 0x60,
+	.pmic_bus_init  = gpi2c_init,
+	.pmic_write     = palmas_i2c_write_u8,
+};
+
+/* The LP8732 and LP8733 are software-compatible, use common struct */
+struct pmic_data lp8733 = {
+	.base_offset = LP873X_BUCK_BASE_VOLT_UV,
+	.step = 5000, /* 5 mV represented in uV */
+	/*
+	 * Offset codes 0 - 0x13 Invalid.
+	 * Offset codes 0x14 0x17 give 10mV steps
+	 * Offset codes 0x17 through 0x9D give 5mV steps
+	 * So let us start with our operating range from .73V
+	 */
+	.start_code = 0x17,
+	.i2c_slave_addr = 0x60,
+	.pmic_bus_init  = gpi2c_init,
+	.pmic_write     = palmas_i2c_write_u8,
+};
+
+struct vcores_data omap5430_volts = {
+	.mpu.value[OPP_NOM] = VDD_MPU,
+	.mpu.addr = SMPS_REG_ADDR_12_MPU,
+	.mpu.pmic = &palmas,
+
+	.core.value[OPP_NOM] = VDD_CORE,
+	.core.addr = SMPS_REG_ADDR_8_CORE,
+	.core.pmic = &palmas,
+
+	.mm.value[OPP_NOM] = VDD_MM,
+	.mm.addr = SMPS_REG_ADDR_45_IVA,
+	.mm.pmic = &palmas,
+};
+
+struct vcores_data omap5430_volts_es2 = {
+	.mpu.value[OPP_NOM] = VDD_MPU_ES2,
+	.mpu.addr = SMPS_REG_ADDR_12_MPU,
+	.mpu.pmic = &palmas,
+	.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
+
+	.core.value[OPP_NOM] = VDD_CORE_ES2,
+	.core.addr = SMPS_REG_ADDR_8_CORE,
+	.core.pmic = &palmas,
+
+	.mm.value[OPP_NOM] = VDD_MM_ES2,
+	.mm.addr = SMPS_REG_ADDR_45_IVA,
+	.mm.pmic = &palmas,
+	.mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK,
+
+	.mpu.efuse.reg[OPP_NOM]	= OMAP5_ES2_PROD_MPU_OPNO_VMIN,
+	.mpu.efuse.reg_bits	= OMAP5_ES2_PROD_REGBITS,
+
+	.core.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_CORE_OPNO_VMIN,
+	.core.efuse.reg_bits	= OMAP5_ES2_PROD_REGBITS,
+
+	.mm.efuse.reg[OPP_NOM]	= OMAP5_ES2_PROD_MM_OPNO_VMIN,
+	.mm.efuse.reg_bits	= OMAP5_ES2_PROD_REGBITS,
+};
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		(*prcm)->cm_l4per_clkstctrl,
+		(*prcm)->cm_l3init_clkstctrl,
+		(*prcm)->cm_memif_clkstctrl,
+		(*prcm)->cm_l4cfg_clkstctrl,
+#ifdef CONFIG_DRIVER_TI_CPSW
+		(*prcm)->cm_gmac_clkstctrl,
+#endif
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3_gpmc_clkctrl,
+		(*prcm)->cm_memif_emif_1_clkctrl,
+		(*prcm)->cm_memif_emif_2_clkctrl,
+		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
+		(*prcm)->cm_wkup_gpio1_clkctrl,
+		(*prcm)->cm_l4per_gpio2_clkctrl,
+		(*prcm)->cm_l4per_gpio3_clkctrl,
+		(*prcm)->cm_l4per_gpio4_clkctrl,
+		(*prcm)->cm_l4per_gpio5_clkctrl,
+		(*prcm)->cm_l4per_gpio6_clkctrl,
+		(*prcm)->cm_l4per_gpio7_clkctrl,
+		(*prcm)->cm_l4per_gpio8_clkctrl,
+#ifdef CONFIG_SCSI_AHCI_PLAT
+		(*prcm)->cm_l3init_ocp2scp3_clkctrl,
+#endif
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_wkup_gptimer1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc2_clkctrl,
+		(*prcm)->cm_l4per_gptimer2_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_l4per_uart1_clkctrl,
+		(*prcm)->cm_l4per_uart3_clkctrl,
+		(*prcm)->cm_l4per_i2c1_clkctrl,
+#ifdef CONFIG_DRIVER_TI_CPSW
+		(*prcm)->cm_gmac_gmac_clkctrl,
+#endif
+
+#ifdef CONFIG_TI_QSPI
+		(*prcm)->cm_l4per_qspi_clkctrl,
+#endif
+#ifdef CONFIG_SCSI_AHCI_PLAT
+		(*prcm)->cm_l3init_sata_clkctrl,
+#endif
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 192 MHz clock for MMC1 & MMC2 */
+	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Set the correct clock dividers for mmc */
+	clrbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+		     HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+	clrbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+		     HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+
+#ifdef CONFIG_TI_QSPI
+	setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
+#endif
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+	/* Enable optional functional clock for SATA */
+	setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
+		     SATA_CLKCTRL_OPTFCLKEN_MASK);
+#endif
+
+	/* Enable SCRM OPT clocks for PER and CORE dpll */
+	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
+			OPTFCLKEN_SCRM_PER_MASK);
+	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
+			OPTFCLKEN_SCRM_CORE_MASK);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+#if defined(CONFIG_DRA7XX)
+		(*prcm)->cm_ipu_clkstctrl,
+#endif
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3init_hsusbtll_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_l4per_mcspi1_clkctrl,
+		(*prcm)->cm_l4per_i2c2_clkctrl,
+		(*prcm)->cm_l4per_i2c3_clkctrl,
+		(*prcm)->cm_l4per_i2c4_clkctrl,
+#if defined(CONFIG_DRA7XX)
+		(*prcm)->cm_ipu_i2c5_clkctrl,
+#else
+		(*prcm)->cm_l4per_i2c5_clkctrl,
+#endif
+		(*prcm)->cm_l3init_hsusbhost_clkctrl,
+		(*prcm)->cm_l3init_fsusb_clkctrl,
+		0
+	};
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+#ifdef CONFIG_TI_EDMA3
+void enable_edma3_clocks(void)
+{
+	u32 const clk_domains_edma3[] = {
+		0
+	};
+
+	u32 const clk_modules_hw_auto_edma3[] = {
+		(*prcm)->cm_l3main1_tptc1_clkctrl,
+		(*prcm)->cm_l3main1_tptc2_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_edma3[] = {
+		0
+	};
+
+	do_enable_clocks(clk_domains_edma3,
+			 clk_modules_hw_auto_edma3,
+			 clk_modules_explicit_en_edma3,
+			 1);
+}
+
+void disable_edma3_clocks(void)
+{
+	u32 const clk_domains_edma3[] = {
+		0
+	};
+
+	u32 const clk_modules_disable_edma3[] = {
+		(*prcm)->cm_l3main1_tptc1_clkctrl,
+		(*prcm)->cm_l3main1_tptc2_clkctrl,
+		0
+	};
+
+	do_disable_clocks(clk_domains_edma3,
+			  clk_modules_disable_edma3,
+			  1);
+}
+#endif
+
+#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
+void enable_usb_clocks(int index)
+{
+	u32 cm_l3init_usb_otg_ss_clkctrl = 0;
+
+	if (index == 0) {
+		cm_l3init_usb_otg_ss_clkctrl =
+			(*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
+		/* Enable 960 MHz clock for dwc3 */
+		setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
+			     OPTFCLKEN_REFCLK960M);
+
+		/* Enable 32 KHz clock for USB_PHY1 */
+		setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
+			     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+		/* Enable 32 KHz clock for USB_PHY3 */
+		if (is_dra7xx())
+			setbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl,
+				     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+	} else if (index == 1) {
+		cm_l3init_usb_otg_ss_clkctrl =
+			(*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
+		/* Enable 960 MHz clock for dwc3 */
+		setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
+			     OPTFCLKEN_REFCLK960M);
+
+		/* Enable 32 KHz clock for dwc3 */
+		setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
+			     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+		/* Enable 60 MHz clock for USB2PHY2 */
+		setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
+			     L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
+	}
+
+	u32 const clk_domains_usb[] = {
+		0
+	};
+
+	u32 const clk_modules_hw_auto_usb[] = {
+		(*prcm)->cm_l3init_ocp2scp1_clkctrl,
+		cm_l3init_usb_otg_ss_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_usb[] = {
+		0
+	};
+
+	do_enable_clocks(clk_domains_usb,
+			 clk_modules_hw_auto_usb,
+			 clk_modules_explicit_en_usb,
+			 1);
+}
+
+void disable_usb_clocks(int index)
+{
+	u32 cm_l3init_usb_otg_ss_clkctrl = 0;
+
+	if (index == 0) {
+		cm_l3init_usb_otg_ss_clkctrl =
+			(*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
+		/* Disable 960 MHz clock for dwc3 */
+		clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
+			     OPTFCLKEN_REFCLK960M);
+
+		/* Disable 32 KHz clock for USB_PHY1 */
+		clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
+			     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+		/* Disable 32 KHz clock for USB_PHY3 */
+		if (is_dra7xx())
+			clrbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl,
+				     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+	} else if (index == 1) {
+		cm_l3init_usb_otg_ss_clkctrl =
+			(*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
+		/* Disable 960 MHz clock for dwc3 */
+		clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
+			     OPTFCLKEN_REFCLK960M);
+
+		/* Disable 32 KHz clock for dwc3 */
+		clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
+			     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+		/* Disable 60 MHz clock for USB2PHY2 */
+		clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
+			     L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
+	}
+
+	u32 const clk_domains_usb[] = {
+		0
+	};
+
+	u32 const clk_modules_disable[] = {
+		(*prcm)->cm_l3init_ocp2scp1_clkctrl,
+		cm_l3init_usb_otg_ss_clkctrl,
+		0
+	};
+
+	do_disable_clocks(clk_domains_usb,
+			  clk_modules_disable,
+			  1);
+}
+#endif
+
+const struct ctrl_ioregs ioregs_omap5430 = {
+	.ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
+	.ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
+	.ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
+	.ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
+	.ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
+};
+
+const struct ctrl_ioregs ioregs_omap5432_es1 = {
+	.ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
+	.ctrl_lpddr2ch = 0x0,
+	.ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
+	.ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE,
+	.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
+	.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
+	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+	.ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
+};
+
+const struct ctrl_ioregs ioregs_omap5432_es2 = {
+	.ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
+	.ctrl_lpddr2ch = 0x0,
+	.ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
+	.ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2,
+	.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
+	.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
+	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+	.ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
+};
+
+const struct ctrl_ioregs ioregs_dra7xx_es1 = {
+	.ctrl_ddrch = 0x40404040,
+	.ctrl_lpddr2ch = 0x40404040,
+	.ctrl_ddr3ch = 0x80808080,
+	.ctrl_ddrio_0 = 0x00094A40,
+	.ctrl_ddrio_1 = 0x04A52000,
+	.ctrl_ddrio_2 = 0x84210000,
+	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
+	.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
+	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
+};
+
+const struct ctrl_ioregs ioregs_dra72x_es1 = {
+	.ctrl_ddrch = 0x40404040,
+	.ctrl_lpddr2ch = 0x40404040,
+	.ctrl_ddr3ch = 0x60606080,
+	.ctrl_ddrio_0 = 0x00094A40,
+	.ctrl_ddrio_1 = 0x04A52000,
+	.ctrl_ddrio_2 = 0x84210000,
+	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
+	.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
+	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
+};
+
+const struct ctrl_ioregs ioregs_dra72x_es2 = {
+	.ctrl_ddrch = 0x40404040,
+	.ctrl_lpddr2ch = 0x40404040,
+	.ctrl_ddr3ch = 0x60606060,
+	.ctrl_ddrio_0 = 0x00094A40,
+	.ctrl_ddrio_1 = 0x00000000,
+	.ctrl_ddrio_2 = 0x00000000,
+	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
+	.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
+	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
+};
+
+void __weak hw_data_init(void)
+{
+	u32 omap_rev = omap_revision();
+
+	switch (omap_rev) {
+
+	case OMAP5430_ES1_0:
+	case OMAP5432_ES1_0:
+	*prcm = &omap5_es1_prcm;
+	*dplls_data = &omap5_dplls_es1;
+	*omap_vcores = &omap5430_volts;
+	*ctrl = &omap5_ctrl;
+	break;
+
+	case OMAP5430_ES2_0:
+	case OMAP5432_ES2_0:
+	*prcm = &omap5_es2_prcm;
+	*dplls_data = &omap5_dplls_es2;
+	*omap_vcores = &omap5430_volts_es2;
+	*ctrl = &omap5_ctrl;
+	break;
+
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
+	case DRA762_ES1_0:
+	*prcm = &dra7xx_prcm;
+	*dplls_data = &dra76x_dplls;
+	*ctrl = &dra7xx_ctrl;
+	break;
+
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+	case DRA752_ES2_0:
+	*prcm = &dra7xx_prcm;
+	*dplls_data = &dra7xx_dplls;
+	*ctrl = &dra7xx_ctrl;
+	break;
+
+	case DRA722_ES1_0:
+	case DRA722_ES2_0:
+	case DRA722_ES2_1:
+	*prcm = &dra7xx_prcm;
+	*dplls_data = &dra72x_dplls;
+	*ctrl = &dra7xx_ctrl;
+	break;
+
+	default:
+		printf("\n INVALID OMAP REVISION ");
+	}
+}
+
+void get_ioregs(const struct ctrl_ioregs **regs)
+{
+	u32 omap_rev = omap_revision();
+
+	switch (omap_rev) {
+	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
+		*regs = &ioregs_omap5430;
+		break;
+	case OMAP5432_ES1_0:
+		*regs = &ioregs_omap5432_es1;
+		break;
+	case OMAP5432_ES2_0:
+		*regs = &ioregs_omap5432_es2;
+		break;
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+	case DRA752_ES2_0:
+	case DRA762_ES1_0:
+	case DRA762_ACD_ES1_0:
+	case DRA762_ABZ_ES1_0:
+		*regs = &ioregs_dra7xx_es1;
+		break;
+	case DRA722_ES1_0:
+		*regs = &ioregs_dra72x_es1;
+		break;
+	case DRA722_ES2_0:
+	case DRA722_ES2_1:
+		*regs = &ioregs_dra72x_es2;
+		break;
+
+	default:
+		printf("\n INVALID OMAP REVISION ");
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/hwinit.c b/roms/u-boot/arch/arm/mach-omap2/omap5/hwinit.c
new file mode 100644
index 000000000..edab9a929
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/hwinit.c
@@ -0,0 +1,510 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Functions for omap5 based boards.
+ *
+ * (C) Copyright 2011
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ *	Sricharan	<r.sricharan@ti.com>
+ */
+#include <common.h>
+#include <cpu_func.h>
+#include <palmas.h>
+#include <asm/armv7.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
+#include <linux/delay.h>
+#include <linux/sizes.h>
+#include <asm/utils.h>
+#include <asm/arch/gpio.h>
+#include <asm/emif.h>
+#include <asm/omap_common.h>
+
+u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
+
+#if !CONFIG_IS_ENABLED(DM_GPIO)
+static struct gpio_bank gpio_bank_54xx[8] = {
+	{ (void *)OMAP54XX_GPIO1_BASE },
+	{ (void *)OMAP54XX_GPIO2_BASE },
+	{ (void *)OMAP54XX_GPIO3_BASE },
+	{ (void *)OMAP54XX_GPIO4_BASE },
+	{ (void *)OMAP54XX_GPIO5_BASE },
+	{ (void *)OMAP54XX_GPIO6_BASE },
+	{ (void *)OMAP54XX_GPIO7_BASE },
+	{ (void *)OMAP54XX_GPIO8_BASE },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
+#endif
+
+void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size)
+{
+	int i;
+	struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
+
+	for (i = 0; i < size; i++, pad++)
+		writel(pad->val, base + pad->offset);
+}
+
+#ifdef CONFIG_SPL_BUILD
+/* LPDDR2 specific IO settings */
+static void io_settings_lpddr2(void)
+{
+	const struct ctrl_ioregs *ioregs;
+
+	get_ioregs(&ioregs);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
+	writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
+	writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
+	writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
+}
+
+/* DDR3 specific IO settings */
+static void io_settings_ddr3(void)
+{
+	u32 io_settings = 0;
+	const struct ctrl_ioregs *ioregs;
+
+	get_ioregs(&ioregs);
+	writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
+
+	writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
+
+	writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
+	writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
+
+	if (!is_dra7xx()) {
+		writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
+		writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
+	}
+
+	/* omap5432 does not use lpddr2 */
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
+
+	writel(ioregs->ctrl_emif_sdram_config_ext,
+	       (*ctrl)->control_emif1_sdram_config_ext);
+	if (!is_dra72x())
+		writel(ioregs->ctrl_emif_sdram_config_ext,
+		       (*ctrl)->control_emif2_sdram_config_ext);
+
+	if (is_omap54xx()) {
+		/* Disable DLL select */
+		io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
+							& 0xFFEFFFFF);
+		writel(io_settings,
+			(*ctrl)->control_port_emif1_sdram_config);
+
+		io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
+							& 0xFFEFFFFF);
+		writel(io_settings,
+			(*ctrl)->control_port_emif2_sdram_config);
+	} else {
+		writel(ioregs->ctrl_ddr_ctrl_ext_0,
+				(*ctrl)->control_ddr_control_ext_0);
+	}
+}
+
+/*
+ * Some tuning of IOs for optimal power and performance
+ */
+void do_io_settings(void)
+{
+	u32 io_settings = 0, mask = 0;
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+
+	/* Impedance settings EMMC, C2C 1,2, hsi2 */
+	mask = (ds_mask << 2) | (ds_mask << 8) |
+		(ds_mask << 16) | (ds_mask << 18);
+	io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
+				(~mask);
+	io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
+			(ds_45_ohm << 18) | (ds_60_ohm << 2);
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
+
+	/* Impedance settings Mcspi2 */
+	mask = (ds_mask << 30);
+	io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
+			(~mask);
+	io_settings |= (ds_60_ohm << 30);
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
+
+	/* Impedance settings C2C 3,4 */
+	mask = (ds_mask << 14) | (ds_mask << 16);
+	io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
+			(~mask);
+	io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
+
+	/* Slew rate settings EMMC, C2C 1,2 */
+	mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
+	io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
+			(~mask);
+	io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
+
+	/* Slew rate settings hsi2, Mcspi2 */
+	mask = (sc_mask << 24) | (sc_mask << 28);
+	io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
+			(~mask);
+	io_settings |= (sc_fast << 28) | (sc_fast << 24);
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
+
+	/* Slew rate settings C2C 3,4 */
+	mask = (sc_mask << 16) | (sc_mask << 18);
+	io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
+			(~mask);
+	io_settings |= (sc_na << 16) | (sc_na << 18);
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
+
+	/* impedance and slew rate settings for usb */
+	mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
+		(usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
+	io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
+			(~mask);
+	io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
+		       (ds_60_ohm << 23) | (sc_fast << 20) |
+		       (sc_fast << 17) | (sc_fast << 14);
+	writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
+
+	if (emif_sdram_type(emif->emif_sdram_config) == EMIF_SDRAM_TYPE_LPDDR2)
+		io_settings_lpddr2();
+	else
+		io_settings_ddr3();
+}
+
+static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
+	{0x45, 0x1},	/* 12 MHz   */
+	{-1, -1},	/* 13 MHz   */
+	{0x63, 0x2},	/* 16.8 MHz */
+	{0x57, 0x2},	/* 19.2 MHz */
+	{0x20, 0x1},	/* 26 MHz   */
+	{-1, -1},	/* 27 MHz   */
+	{0x41, 0x3}	/* 38.4 MHz */
+};
+
+void srcomp_enable(void)
+{
+	u32 srcomp_value, mul_factor, div_factor, clk_val, i;
+	u32 sysclk_ind	= get_sys_clk_index();
+	u32 omap_rev	= omap_revision();
+
+	if (!is_omap54xx())
+		return;
+
+	mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
+	div_factor = srcomp_parameters[sysclk_ind].divide_factor;
+
+	for (i = 0; i < 4; i++) {
+		srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4);
+		srcomp_value &=
+			~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK);
+		srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
+			(div_factor << DIVIDE_FACTOR_XS_SHIFT);
+		writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4);
+	}
+
+	if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) {
+		clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
+
+		for (i = 0; i < 4; i++) {
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~PWRDWN_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+
+			while (((readl((*ctrl)->control_srcomp_north_side + i*4)
+				& SRCODE_READ_XS_MASK) >>
+				SRCODE_READ_XS_SHIFT) == 0)
+				;
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~OVERRIDE_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+	} else {
+		srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK |
+				  DIVIDE_FACTOR_XS_MASK);
+		srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
+				(div_factor << DIVIDE_FACTOR_XS_SHIFT);
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		for (i = 0; i < 4; i++) {
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~OVERRIDE_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~OVERRIDE_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
+
+		clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl);
+
+		for (i = 0; i < 4; i++) {
+			while (((readl((*ctrl)->control_srcomp_north_side + i*4)
+				& SRCODE_READ_XS_MASK) >>
+				SRCODE_READ_XS_SHIFT) == 0)
+				;
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+
+		while (((readl((*ctrl)->control_srcomp_east_side_wkup) &
+			SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0)
+			;
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+	}
+}
+#endif
+
+void config_data_eye_leveling_samples(u32 emif_base)
+{
+	const struct ctrl_ioregs *ioregs;
+
+	get_ioregs(&ioregs);
+
+	/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
+	if (emif_base == EMIF1_BASE)
+		writel(ioregs->ctrl_emif_sdram_config_ext_final,
+		       (*ctrl)->control_emif1_sdram_config_ext);
+	else if (emif_base == EMIF2_BASE)
+		writel(ioregs->ctrl_emif_sdram_config_ext_final,
+		       (*ctrl)->control_emif2_sdram_config_ext);
+}
+
+void init_cpu_configuration(void)
+{
+	u32 l2actlr;
+
+	asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r"(l2actlr));
+	/*
+	 * L2ACTLR: Ensure to enable the following:
+	 * 3: Disable clean/evict push to external
+	 * 4: Disable WriteUnique and WriteLineUnique transactions from master
+	 * 8: Disable DVM/CMO message broadcast
+	 */
+	l2actlr |= 0x118;
+	omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2actlr);
+}
+
+void init_omap_revision(void)
+{
+	/*
+	 * For some of the ES2/ES1 boards ID_CODE is not reliable:
+	 * Also, ES1 and ES2 have different ARM revisions
+	 * So use ARM revision for identification
+	 */
+	unsigned int rev = cortex_rev();
+
+	switch (readl(CONTROL_ID_CODE)) {
+	case OMAP5430_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = OMAP5430_ES1_0;
+		if (rev == MIDR_CORTEX_A15_R2P2)
+			*omap_si_rev = OMAP5430_ES2_0;
+		break;
+	case OMAP5432_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = OMAP5432_ES1_0;
+		if (rev == MIDR_CORTEX_A15_R2P2)
+			*omap_si_rev = OMAP5432_ES2_0;
+		break;
+	case OMAP5430_CONTROL_ID_CODE_ES2_0:
+		*omap_si_rev = OMAP5430_ES2_0;
+		break;
+	case OMAP5432_CONTROL_ID_CODE_ES2_0:
+		*omap_si_rev = OMAP5432_ES2_0;
+		break;
+	case DRA762_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = DRA762_ES1_0;
+		break;
+	case DRA752_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = DRA752_ES1_0;
+		break;
+	case DRA752_CONTROL_ID_CODE_ES1_1:
+		*omap_si_rev = DRA752_ES1_1;
+		break;
+	case DRA752_CONTROL_ID_CODE_ES2_0:
+		*omap_si_rev = DRA752_ES2_0;
+		break;
+	case DRA722_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = DRA722_ES1_0;
+		break;
+	case DRA722_CONTROL_ID_CODE_ES2_0:
+		*omap_si_rev = DRA722_ES2_0;
+		break;
+	case DRA722_CONTROL_ID_CODE_ES2_1:
+		*omap_si_rev = DRA722_ES2_1;
+		break;
+	default:
+		*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
+	}
+	init_cpu_configuration();
+}
+
+void init_package_revision(void)
+{
+	unsigned int die_id[4] = { 0 };
+	u8 package;
+
+	omap_die_id(die_id);
+	package = (die_id[2] >> 16) & 0x3;
+
+	if (is_dra76x()) {
+		switch (package) {
+		case DRA762_ABZ_PACKAGE:
+			*omap_si_rev = DRA762_ABZ_ES1_0;
+			break;
+		case DRA762_ACD_PACKAGE:
+		default:
+			*omap_si_rev = DRA762_ACD_ES1_0;
+			break;
+		}
+	}
+}
+
+void omap_die_id(unsigned int *die_id)
+{
+	die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0);
+	die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1);
+	die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2);
+	die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3);
+}
+
+void reset_cpu(void)
+{
+	u32 omap_rev = omap_revision();
+
+	/*
+	 * WARM reset is not functional in case of OMAP5430 ES1.0 soc.
+	 * So use cold reset in case instead.
+	 */
+	if (omap_rev == OMAP5430_ES1_0)
+		writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl);
+	else
+		writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl);
+}
+
+u32 warm_reset(void)
+{
+	return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK;
+}
+
+void setup_warmreset_time(void)
+{
+	u32 rst_time, rst_val;
+
+	/*
+	 * MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff.
+	 * 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles
+	 * into microsec and passing the value.
+	 */
+	rst_time = usec_to_32k(CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC)
+		<< RSTTIME1_SHIFT;
+
+	if (rst_time > RSTTIME1_MASK)
+		rst_time = RSTTIME1_MASK;
+
+	rst_val = readl((*prcm)->prm_rsttime) & ~RSTTIME1_MASK;
+	rst_val |= rst_time;
+	writel(rst_val, (*prcm)->prm_rsttime);
+}
+
+void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
+				 u32 cpu_rev_comb, u32 cpu_variant,
+				 u32 cpu_rev)
+{
+	omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2auxctrl);
+}
+
+void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+			  u32 cpu_variant, u32 cpu_rev)
+{
+
+#ifdef CONFIG_ARM_ERRATA_801819
+	/*
+	 * DRA72x processors are uniprocessors and DONOT have
+	 * ACP (Accelerator Coherency Port) hooked to ACE (AXI Coherency
+	 * Extensions) Hence the erratum workaround is not applicable for
+	 * DRA72x processors.
+	 */
+	if (is_dra72x())
+		acr &= ~((0x3 << 23) | (0x3 << 25));
+#endif
+	omap_smc1(OMAP5_SERVICE_ACR_SET, acr);
+}
+
+#if defined(CONFIG_PALMAS_POWER)
+__weak void board_mmc_poweron_ldo(uint voltage)
+{
+	palmas_mmc1_poweron_ldo(LDO1_VOLTAGE, LDO1_CTRL, voltage);
+}
+
+void vmmc_pbias_config(uint voltage)
+{
+	u32 value = 0;
+
+	value = readl((*ctrl)->control_pbias);
+	value &= ~SDCARD_PWRDNZ;
+	writel(value, (*ctrl)->control_pbias);
+	udelay(10); /* wait 10 us */
+	value &= ~SDCARD_BIAS_PWRDNZ;
+	writel(value, (*ctrl)->control_pbias);
+
+	board_mmc_poweron_ldo(voltage);
+
+	value = readl((*ctrl)->control_pbias);
+	value |= SDCARD_BIAS_PWRDNZ;
+	writel(value, (*ctrl)->control_pbias);
+	udelay(150); /* wait 150 us */
+	value |= SDCARD_PWRDNZ;
+	writel(value, (*ctrl)->control_pbias);
+	udelay(150); /* wait 150 us */
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/prcm-regs.c b/roms/u-boot/arch/arm/mach-omap2/omap5/prcm-regs.c
new file mode 100644
index 000000000..b5baebc06
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/prcm-regs.c
@@ -0,0 +1,1023 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * HW regs data for OMAP5 Soc
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ */
+
+#include <asm/omap_common.h>
+#include <asm/io.h>
+
+struct prcm_regs const omap5_es1_prcm = {
+	/* cm1.ckgen */
+	.cm_clksel_core = 0x4a004100,
+	.cm_clksel_abe = 0x4a004108,
+	.cm_dll_ctrl = 0x4a004110,
+	.cm_clkmode_dpll_core = 0x4a004120,
+	.cm_idlest_dpll_core = 0x4a004124,
+	.cm_autoidle_dpll_core = 0x4a004128,
+	.cm_clksel_dpll_core = 0x4a00412c,
+	.cm_div_m2_dpll_core = 0x4a004130,
+	.cm_div_m3_dpll_core = 0x4a004134,
+	.cm_div_h11_dpll_core = 0x4a004138,
+	.cm_div_h12_dpll_core = 0x4a00413c,
+	.cm_div_h13_dpll_core = 0x4a004140,
+	.cm_div_h14_dpll_core = 0x4a004144,
+	.cm_ssc_deltamstep_dpll_core = 0x4a004148,
+	.cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+	.cm_emu_override_dpll_core = 0x4a004150,
+	.cm_div_h22_dpllcore = 0x4a004154,
+	.cm_div_h23_dpll_core = 0x4a004158,
+	.cm_clkmode_dpll_mpu = 0x4a004160,
+	.cm_idlest_dpll_mpu = 0x4a004164,
+	.cm_autoidle_dpll_mpu = 0x4a004168,
+	.cm_clksel_dpll_mpu = 0x4a00416c,
+	.cm_div_m2_dpll_mpu = 0x4a004170,
+	.cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+	.cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+	.cm_bypclk_dpll_mpu = 0x4a00419c,
+	.cm_clkmode_dpll_iva = 0x4a0041a0,
+	.cm_idlest_dpll_iva = 0x4a0041a4,
+	.cm_autoidle_dpll_iva = 0x4a0041a8,
+	.cm_clksel_dpll_iva = 0x4a0041ac,
+	.cm_div_h11_dpll_iva = 0x4a0041b8,
+	.cm_div_h12_dpll_iva = 0x4a0041bc,
+	.cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+	.cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+	.cm_bypclk_dpll_iva = 0x4a0041dc,
+	.cm_clkmode_dpll_abe = 0x4a0041e0,
+	.cm_idlest_dpll_abe = 0x4a0041e4,
+	.cm_autoidle_dpll_abe = 0x4a0041e8,
+	.cm_clksel_dpll_abe = 0x4a0041ec,
+	.cm_div_m2_dpll_abe = 0x4a0041f0,
+	.cm_div_m3_dpll_abe = 0x4a0041f4,
+	.cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+	.cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+	.cm_clkmode_dpll_ddrphy = 0x4a004220,
+	.cm_idlest_dpll_ddrphy = 0x4a004224,
+	.cm_autoidle_dpll_ddrphy = 0x4a004228,
+	.cm_clksel_dpll_ddrphy = 0x4a00422c,
+	.cm_div_m2_dpll_ddrphy = 0x4a004230,
+	.cm_div_h11_dpll_ddrphy = 0x4a004238,
+	.cm_div_h12_dpll_ddrphy = 0x4a00423c,
+	.cm_div_h13_dpll_ddrphy = 0x4a004240,
+	.cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+	.cm_shadow_freq_config1 = 0x4a004260,
+	.cm_mpu_mpu_clkctrl = 0x4a004320,
+
+	/* cm1.dsp */
+	.cm_dsp_clkstctrl = 0x4a004400,
+	.cm_dsp_dsp_clkctrl = 0x4a004420,
+
+	/* cm1.abe */
+	.cm1_abe_clkstctrl = 0x4a004500,
+	.cm1_abe_l4abe_clkctrl = 0x4a004520,
+	.cm1_abe_aess_clkctrl = 0x4a004528,
+	.cm1_abe_pdm_clkctrl = 0x4a004530,
+	.cm1_abe_dmic_clkctrl = 0x4a004538,
+	.cm1_abe_mcasp_clkctrl = 0x4a004540,
+	.cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+	.cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+	.cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+	.cm1_abe_slimbus_clkctrl = 0x4a004560,
+	.cm1_abe_timer5_clkctrl = 0x4a004568,
+	.cm1_abe_timer6_clkctrl = 0x4a004570,
+	.cm1_abe_timer7_clkctrl = 0x4a004578,
+	.cm1_abe_timer8_clkctrl = 0x4a004580,
+	.cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+	/* cm2.ckgen */
+	.cm_clksel_mpu_m3_iss_root = 0x4a008100,
+	.cm_clksel_usb_60mhz = 0x4a008104,
+	.cm_scale_fclk = 0x4a008108,
+	.cm_core_dvfs_perf1 = 0x4a008110,
+	.cm_core_dvfs_perf2 = 0x4a008114,
+	.cm_core_dvfs_perf3 = 0x4a008118,
+	.cm_core_dvfs_perf4 = 0x4a00811c,
+	.cm_core_dvfs_current = 0x4a008124,
+	.cm_iva_dvfs_perf_tesla = 0x4a008128,
+	.cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+	.cm_iva_dvfs_perf_abe = 0x4a008130,
+	.cm_iva_dvfs_current = 0x4a008138,
+	.cm_clkmode_dpll_per = 0x4a008140,
+	.cm_idlest_dpll_per = 0x4a008144,
+	.cm_autoidle_dpll_per = 0x4a008148,
+	.cm_clksel_dpll_per = 0x4a00814c,
+	.cm_div_m2_dpll_per = 0x4a008150,
+	.cm_div_m3_dpll_per = 0x4a008154,
+	.cm_div_h11_dpll_per = 0x4a008158,
+	.cm_div_h12_dpll_per = 0x4a00815c,
+	.cm_div_h14_dpll_per = 0x4a008164,
+	.cm_ssc_deltamstep_dpll_per = 0x4a008168,
+	.cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+	.cm_emu_override_dpll_per = 0x4a008170,
+	.cm_clkmode_dpll_usb = 0x4a008180,
+	.cm_idlest_dpll_usb = 0x4a008184,
+	.cm_autoidle_dpll_usb = 0x4a008188,
+	.cm_clksel_dpll_usb = 0x4a00818c,
+	.cm_div_m2_dpll_usb = 0x4a008190,
+	.cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+	.cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+	.cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+	.cm_clkmode_dpll_unipro = 0x4a0081c0,
+	.cm_idlest_dpll_unipro = 0x4a0081c4,
+	.cm_autoidle_dpll_unipro = 0x4a0081c8,
+	.cm_clksel_dpll_unipro = 0x4a0081cc,
+	.cm_div_m2_dpll_unipro = 0x4a0081d0,
+	.cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+	.cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+
+	/* cm2.core */
+	.cm_coreaon_bandgap_clkctrl = 0x4a008648,
+	.cm_coreaon_io_srcomp_clkctrl = 0x4a008650,
+	.cm_l3_1_clkstctrl = 0x4a008700,
+	.cm_l3_1_dynamicdep = 0x4a008708,
+	.cm_l3_1_l3_1_clkctrl = 0x4a008720,
+	.cm_l3_2_clkstctrl = 0x4a008800,
+	.cm_l3_2_dynamicdep = 0x4a008808,
+	.cm_l3_2_l3_2_clkctrl = 0x4a008820,
+	.cm_l3_gpmc_clkctrl = 0x4a008828,
+	.cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+	.cm_mpu_m3_clkstctrl = 0x4a008900,
+	.cm_mpu_m3_staticdep = 0x4a008904,
+	.cm_mpu_m3_dynamicdep = 0x4a008908,
+	.cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+	.cm_sdma_clkstctrl = 0x4a008a00,
+	.cm_sdma_staticdep = 0x4a008a04,
+	.cm_sdma_dynamicdep = 0x4a008a08,
+	.cm_sdma_sdma_clkctrl = 0x4a008a20,
+	.cm_memif_clkstctrl = 0x4a008b00,
+	.cm_memif_dmm_clkctrl = 0x4a008b20,
+	.cm_memif_emif_fw_clkctrl = 0x4a008b28,
+	.cm_memif_emif_1_clkctrl = 0x4a008b30,
+	.cm_memif_emif_2_clkctrl = 0x4a008b38,
+	.cm_memif_dll_clkctrl = 0x4a008b40,
+	.cm_memif_emif_h1_clkctrl = 0x4a008b50,
+	.cm_memif_emif_h2_clkctrl = 0x4a008b58,
+	.cm_memif_dll_h_clkctrl = 0x4a008b60,
+	.cm_c2c_clkstctrl = 0x4a008c00,
+	.cm_c2c_staticdep = 0x4a008c04,
+	.cm_c2c_dynamicdep = 0x4a008c08,
+	.cm_c2c_sad2d_clkctrl = 0x4a008c20,
+	.cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+	.cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+	.cm_l4cfg_clkstctrl = 0x4a008d00,
+	.cm_l4cfg_dynamicdep = 0x4a008d08,
+	.cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+	.cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+	.cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+	.cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+	.cm_l3instr_clkstctrl = 0x4a008e00,
+	.cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+	.cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+	.cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40,
+
+	/* cm2.ivahd */
+	.cm_ivahd_clkstctrl = 0x4a008f00,
+	.cm_ivahd_ivahd_clkctrl = 0x4a008f20,
+	.cm_ivahd_sl2_clkctrl = 0x4a008f28,
+
+	/* cm2.cam */
+	.cm_cam_clkstctrl = 0x4a009000,
+	.cm_cam_iss_clkctrl = 0x4a009020,
+	.cm_cam_fdif_clkctrl = 0x4a009028,
+
+	/* cm2.dss */
+	.cm_dss_clkstctrl = 0x4a009100,
+	.cm_dss_dss_clkctrl = 0x4a009120,
+
+	/* cm2.sgx */
+	.cm_sgx_clkstctrl = 0x4a009200,
+	.cm_sgx_sgx_clkctrl = 0x4a009220,
+
+	/* cm2.l3init */
+	.cm_l3init_clkstctrl = 0x4a009300,
+	.cm_l3init_hsmmc1_clkctrl = 0x4a009328,
+	.cm_l3init_hsmmc2_clkctrl = 0x4a009330,
+	.cm_l3init_hsi_clkctrl = 0x4a009338,
+	.cm_l3init_hsusbhost_clkctrl = 0x4a009358,
+	.cm_l3init_hsusbotg_clkctrl = 0x4a009360,
+	.cm_l3init_hsusbtll_clkctrl = 0x4a009368,
+	.cm_l3init_p1500_clkctrl = 0x4a009378,
+	.cm_l3init_sata_clkctrl = 0x4a009388,
+	.cm_l3init_fsusb_clkctrl = 0x4a0093d0,
+	.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+	.cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8,
+
+	/* cm2.l4per */
+	.cm_l4per_clkstctrl = 0x4a009400,
+	.cm_l4per_dynamicdep = 0x4a009408,
+	.cm_l4per_adc_clkctrl = 0x4a009420,
+	.cm_l4per_gptimer10_clkctrl = 0x4a009428,
+	.cm_l4per_gptimer11_clkctrl = 0x4a009430,
+	.cm_l4per_gptimer2_clkctrl = 0x4a009438,
+	.cm_l4per_gptimer3_clkctrl = 0x4a009440,
+	.cm_l4per_gptimer4_clkctrl = 0x4a009448,
+	.cm_l4per_gptimer9_clkctrl = 0x4a009450,
+	.cm_l4per_elm_clkctrl = 0x4a009458,
+	.cm_l4per_gpio2_clkctrl = 0x4a009460,
+	.cm_l4per_gpio3_clkctrl = 0x4a009468,
+	.cm_l4per_gpio4_clkctrl = 0x4a009470,
+	.cm_l4per_gpio5_clkctrl = 0x4a009478,
+	.cm_l4per_gpio6_clkctrl = 0x4a009480,
+	.cm_l4per_hdq1w_clkctrl = 0x4a009488,
+	.cm_l4per_hecc1_clkctrl = 0x4a009490,
+	.cm_l4per_hecc2_clkctrl = 0x4a009498,
+	.cm_l4per_i2c1_clkctrl = 0x4a0094a0,
+	.cm_l4per_i2c2_clkctrl = 0x4a0094a8,
+	.cm_l4per_i2c3_clkctrl = 0x4a0094b0,
+	.cm_l4per_i2c4_clkctrl = 0x4a0094b8,
+	.cm_l4per_l4per_clkctrl = 0x4a0094c0,
+	.cm_l4per_mcasp2_clkctrl = 0x4a0094d0,
+	.cm_l4per_mcasp3_clkctrl = 0x4a0094d8,
+	.cm_l4per_mgate_clkctrl = 0x4a0094e8,
+	.cm_l4per_mcspi1_clkctrl = 0x4a0094f0,
+	.cm_l4per_mcspi2_clkctrl = 0x4a0094f8,
+	.cm_l4per_mcspi3_clkctrl = 0x4a009500,
+	.cm_l4per_mcspi4_clkctrl = 0x4a009508,
+	.cm_l4per_gpio7_clkctrl = 0x4a009510,
+	.cm_l4per_gpio8_clkctrl = 0x4a009518,
+	.cm_l4per_mmcsd3_clkctrl = 0x4a009520,
+	.cm_l4per_mmcsd4_clkctrl = 0x4a009528,
+	.cm_l4per_msprohg_clkctrl = 0x4a009530,
+	.cm_l4per_slimbus2_clkctrl = 0x4a009538,
+	.cm_l4per_uart1_clkctrl = 0x4a009540,
+	.cm_l4per_uart2_clkctrl = 0x4a009548,
+	.cm_l4per_uart3_clkctrl = 0x4a009550,
+	.cm_l4per_uart4_clkctrl = 0x4a009558,
+	.cm_l4per_mmcsd5_clkctrl = 0x4a009560,
+	.cm_l4per_i2c5_clkctrl = 0x4a009568,
+	.cm_l4per_uart5_clkctrl = 0x4a009570,
+	.cm_l4per_uart6_clkctrl = 0x4a009578,
+	.cm_l4sec_clkstctrl = 0x4a009580,
+	.cm_l4sec_staticdep = 0x4a009584,
+	.cm_l4sec_dynamicdep = 0x4a009588,
+	.cm_l4sec_aes1_clkctrl = 0x4a0095a0,
+	.cm_l4sec_aes2_clkctrl = 0x4a0095a8,
+	.cm_l4sec_des3des_clkctrl = 0x4a0095b0,
+	.cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8,
+	.cm_l4sec_rng_clkctrl = 0x4a0095c0,
+	.cm_l4sec_sha2md51_clkctrl = 0x4a0095c8,
+	.cm_l4sec_cryptodma_clkctrl = 0x4a0095d8,
+
+	/* l4 wkup regs */
+	.cm_abe_pll_ref_clksel = 0x4ae0610c,
+	.cm_sys_clksel = 0x4ae06110,
+	.cm_wkup_clkstctrl = 0x4ae07800,
+	.cm_wkup_l4wkup_clkctrl = 0x4ae07820,
+	.cm_wkup_wdtimer1_clkctrl = 0x4ae07828,
+	.cm_wkup_wdtimer2_clkctrl = 0x4ae07830,
+	.cm_wkup_gpio1_clkctrl = 0x4ae07838,
+	.cm_wkup_gptimer1_clkctrl = 0x4ae07840,
+	.cm_wkup_gptimer12_clkctrl = 0x4ae07848,
+	.cm_wkup_synctimer_clkctrl = 0x4ae07850,
+	.cm_wkup_usim_clkctrl = 0x4ae07858,
+	.cm_wkup_sarram_clkctrl = 0x4ae07860,
+	.cm_wkup_keyboard_clkctrl = 0x4ae07878,
+	.cm_wkup_rtc_clkctrl = 0x4ae07880,
+	.cm_wkup_bandgap_clkctrl = 0x4ae07888,
+	.cm_wkupaon_scrm_clkctrl = 0x4ae07890,
+	.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898,
+	.prm_rstctrl = 0x4ae07b00,
+	.prm_rstst = 0x4ae07b04,
+	.prm_rsttime = 0x4ae07b08,
+	.prm_vc_val_bypass = 0x4ae07ba0,
+	.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
+	.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
+
+	/* SCRM stuff, used by some boards */
+	.scrm_auxclk0 = 0x4ae0a310,
+	.scrm_auxclk1 = 0x4ae0a314,
+};
+
+struct omap_sys_ctrl_regs const omap5_ctrl = {
+	.control_status				= 0x4A002134,
+	.control_std_fuse_die_id_0		= 0x4A002200,
+	.control_std_fuse_die_id_1		= 0x4A002208,
+	.control_std_fuse_die_id_2		= 0x4A00220C,
+	.control_std_fuse_die_id_3		= 0x4A002210,
+	.control_phy_power_usb 			= 0x4A002370,
+	.control_phy_power_sata			= 0x4A002374,
+	.control_padconf_core_base		= 0x4A002800,
+	.control_paconf_global			= 0x4A002DA0,
+	.control_paconf_mode			= 0x4A002DA4,
+	.control_smart1io_padconf_0		= 0x4A002DA8,
+	.control_smart1io_padconf_1		= 0x4A002DAC,
+	.control_smart1io_padconf_2		= 0x4A002DB0,
+	.control_smart2io_padconf_0		= 0x4A002DB4,
+	.control_smart2io_padconf_1		= 0x4A002DB8,
+	.control_smart2io_padconf_2		= 0x4A002DBC,
+	.control_smart3io_padconf_0		= 0x4A002DC0,
+	.control_smart3io_padconf_1		= 0x4A002DC4,
+	.control_pbias				= 0x4A002E00,
+	.control_i2c_0				= 0x4A002E04,
+	.control_camera_rx			= 0x4A002E08,
+	.control_hdmi_tx_phy			= 0x4A002E0C,
+	.control_uniportm			= 0x4A002E10,
+	.control_dsiphy				= 0x4A002E14,
+	.control_mcbsplp			= 0x4A002E18,
+	.control_usb2phycore			= 0x4A002E1C,
+	.control_hdmi_1				= 0x4A002E20,
+	.control_hsi				= 0x4A002E24,
+	.control_ddr3ch1_0			= 0x4A002E30,
+	.control_ddr3ch2_0			= 0x4A002E34,
+	.control_ddrch1_0			= 0x4A002E38,
+	.control_ddrch1_1			= 0x4A002E3C,
+	.control_ddrch2_0			= 0x4A002E40,
+	.control_ddrch2_1			= 0x4A002E44,
+	.control_lpddr2ch1_0			= 0x4A002E48,
+	.control_lpddr2ch1_1			= 0x4A002E4C,
+	.control_ddrio_0			= 0x4A002E50,
+	.control_ddrio_1			= 0x4A002E54,
+	.control_ddrio_2			= 0x4A002E58,
+	.control_hyst_1				= 0x4A002E5C,
+	.control_usbb_hsic_control		= 0x4A002E60,
+	.control_c2c				= 0x4A002E64,
+	.control_core_control_spare_rw		= 0x4A002E68,
+	.control_core_control_spare_r		= 0x4A002E6C,
+	.control_core_control_spare_r_c0	= 0x4A002E70,
+	.control_srcomp_north_side		= 0x4A002E74,
+	.control_srcomp_south_side		= 0x4A002E78,
+	.control_srcomp_east_side		= 0x4A002E7C,
+	.control_srcomp_west_side		= 0x4A002E80,
+	.control_srcomp_code_latch		= 0x4A002E84,
+	.control_port_emif1_sdram_config	= 0x4AE0C110,
+	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
+	.control_port_emif2_sdram_config	= 0x4AE0C118,
+	.control_emif1_sdram_config_ext		= 0x4AE0C144,
+	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_wkup_ldovbb_mpu_voltage_ctrl	= 0x4AE0C318,
+	.control_wkup_ldovbb_mm_voltage_ctrl	= 0x4AE0C314,
+	.control_padconf_wkup_base		= 0x4AE0C800,
+	.control_smart1nopmio_padconf_0		= 0x4AE0CDA0,
+	.control_smart1nopmio_padconf_1		= 0x4AE0CDA4,
+	.control_padconf_mode			= 0x4AE0CDA8,
+	.control_xtal_oscillator		= 0x4AE0CDAC,
+	.control_i2c_2				= 0x4AE0CDB0,
+	.control_ckobuffer			= 0x4AE0CDB4,
+	.control_wkup_control_spare_rw		= 0x4AE0CDB8,
+	.control_wkup_control_spare_r		= 0x4AE0CDBC,
+	.control_wkup_control_spare_r_c0	= 0x4AE0CDC0,
+	.control_srcomp_east_side_wkup		= 0x4AE0CDC4,
+	.control_efuse_1			= 0x4AE0CDC8,
+	.control_efuse_2			= 0x4AE0CDCC,
+	.control_efuse_3			= 0x4AE0CDD0,
+	.control_efuse_4			= 0x4AE0CDD4,
+	.control_efuse_5			= 0x4AE0CDD8,
+	.control_efuse_6			= 0x4AE0CDDC,
+	.control_efuse_7			= 0x4AE0CDE0,
+	.control_efuse_8			= 0x4AE0CDE4,
+	.control_efuse_9			= 0x4AE0CDE8,
+	.control_efuse_10			= 0x4AE0CDEC,
+	.control_efuse_11			= 0x4AE0CDF0,
+	.control_efuse_12			= 0x4AE0CDF4,
+	.control_efuse_13			= 0x4AE0CDF8,
+};
+
+struct omap_sys_ctrl_regs const dra7xx_ctrl = {
+	.control_status				= 0x4A002134,
+	.control_phy_power_usb			= 0x4A002370,
+	.control_phy_power_sata			= 0x4A002374,
+	.ctrl_core_sma_sw_0			= 0x4A0023FC,
+	.ctrl_core_sma_sw_1			= 0x4A002534,
+	.control_core_mac_id_0_lo		= 0x4A002514,
+	.control_core_mac_id_0_hi		= 0x4A002518,
+	.control_core_mac_id_1_lo		= 0x4A00251C,
+	.control_core_mac_id_1_hi		= 0x4A002520,
+	.control_core_mmr_lock1			= 0x4A002540,
+	.control_core_mmr_lock2			= 0x4A002544,
+	.control_core_mmr_lock3			= 0x4A002548,
+	.control_core_mmr_lock4			= 0x4A00254C,
+	.control_core_mmr_lock5			= 0x4A002550,
+	.control_core_control_io1		= 0x4A002554,
+	.control_core_control_io2		= 0x4A002558,
+	.control_paconf_global			= 0x4A002DA0,
+	.control_paconf_mode			= 0x4A002DA4,
+	.control_smart1io_padconf_0		= 0x4A002DA8,
+	.control_smart1io_padconf_1		= 0x4A002DAC,
+	.control_smart1io_padconf_2		= 0x4A002DB0,
+	.control_smart2io_padconf_0		= 0x4A002DB4,
+	.control_smart2io_padconf_1		= 0x4A002DB8,
+	.control_smart2io_padconf_2		= 0x4A002DBC,
+	.control_smart3io_padconf_0		= 0x4A002DC0,
+	.control_smart3io_padconf_1		= 0x4A002DC4,
+	.control_pbias				= 0x4A002E00,
+	.control_i2c_0				= 0x4A002E04,
+	.control_camera_rx			= 0x4A002E08,
+	.control_hdmi_tx_phy			= 0x4A002E0C,
+	.control_uniportm			= 0x4A002E10,
+	.control_dsiphy				= 0x4A002E14,
+	.control_mcbsplp			= 0x4A002E18,
+	.control_usb2phycore			= 0x4A002E1C,
+	.control_hdmi_1				= 0x4A002E20,
+	.control_hsi				= 0x4A002E24,
+	.control_ddr3ch1_0			= 0x4A002E30,
+	.control_ddr3ch2_0			= 0x4A002E34,
+	.control_ddrch1_0			= 0x4A002E38,
+	.control_ddrch1_1			= 0x4A002E3C,
+	.control_ddrch2_0			= 0x4A002E40,
+	.control_ddrch2_1			= 0x4A002E44,
+	.control_lpddr2ch1_0			= 0x4A002E48,
+	.control_lpddr2ch1_1			= 0x4A002E4C,
+	.control_ddrio_0			= 0x4A002E50,
+	.control_ddrio_1			= 0x4A002E54,
+	.control_ddrio_2			= 0x4A002E58,
+	.control_hyst_1				= 0x4A002E5C,
+	.control_usbb_hsic_control		= 0x4A002E60,
+	.control_c2c				= 0x4A002E64,
+	.control_core_control_spare_rw		= 0x4A002E68,
+	.control_core_control_spare_r		= 0x4A002E6C,
+	.control_core_control_spare_r_c0	= 0x4A002E70,
+	.control_srcomp_north_side		= 0x4A002E74,
+	.control_srcomp_south_side		= 0x4A002E78,
+	.control_srcomp_east_side		= 0x4A002E7C,
+	.control_srcomp_west_side		= 0x4A002E80,
+	.control_srcomp_code_latch		= 0x4A002E84,
+	.control_ddr_control_ext_0		= 0x4A002E88,
+	.control_padconf_core_base		= 0x4A003400,
+	.control_port_emif1_sdram_config	= 0x4AE0C110,
+	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
+	.control_port_emif2_sdram_config	= 0x4AE0C118,
+	.control_emif1_sdram_config_ext		= 0x4AE0C144,
+	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_wkup_ldovbb_mpu_voltage_ctrl	= 0x4AE0C158,
+	.control_wkup_ldovbb_iva_voltage_ctrl	= 0x4A002470,
+	.control_wkup_ldovbb_eve_voltage_ctrl	= 0x4A00246C,
+	.control_wkup_ldovbb_gpu_voltage_ctrl	= 0x4AE0C154,
+	.control_std_fuse_die_id_0		= 0x4AE0C200,
+	.control_std_fuse_die_id_1		= 0x4AE0C208,
+	.control_std_fuse_die_id_2		= 0x4AE0C20C,
+	.control_std_fuse_die_id_3		= 0x4AE0C210,
+	.control_padconf_mode			= 0x4AE0C5A0,
+	.control_xtal_oscillator		= 0x4AE0C5A4,
+	.control_i2c_2				= 0x4AE0C5A8,
+	.control_ckobuffer			= 0x4AE0C5AC,
+	.control_wkup_control_spare_rw		= 0x4AE0C5B0,
+	.control_wkup_control_spare_r		= 0x4AE0C5B4,
+	.control_wkup_control_spare_r_c0	= 0x4AE0C5B8,
+	.control_srcomp_east_side_wkup		= 0x4AE0C5BC,
+	.control_efuse_1			= 0x4AE0C5C8,
+	.control_efuse_2			= 0x4AE0C5CC,
+	.control_efuse_3			= 0x4AE0C5D0,
+	.control_efuse_4			= 0x4AE0C5D4,
+	.control_efuse_13			= 0x4AE0C5F0,
+	.iodelay_config_base			= 0x4844A000,
+};
+
+struct prcm_regs const omap5_es2_prcm = {
+	/* cm1.ckgen */
+	.cm_clksel_core = 0x4a004100,
+	.cm_clksel_abe = 0x4a004108,
+	.cm_dll_ctrl = 0x4a004110,
+	.cm_clkmode_dpll_core = 0x4a004120,
+	.cm_idlest_dpll_core = 0x4a004124,
+	.cm_autoidle_dpll_core = 0x4a004128,
+	.cm_clksel_dpll_core = 0x4a00412c,
+	.cm_div_m2_dpll_core = 0x4a004130,
+	.cm_div_m3_dpll_core = 0x4a004134,
+	.cm_div_h11_dpll_core = 0x4a004138,
+	.cm_div_h12_dpll_core = 0x4a00413c,
+	.cm_div_h13_dpll_core = 0x4a004140,
+	.cm_div_h14_dpll_core = 0x4a004144,
+	.cm_ssc_deltamstep_dpll_core = 0x4a004148,
+	.cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+	.cm_div_h21_dpll_core = 0x4a004150,
+	.cm_div_h22_dpllcore = 0x4a004154,
+	.cm_div_h23_dpll_core = 0x4a004158,
+	.cm_div_h24_dpll_core = 0x4a00415c,
+	.cm_clkmode_dpll_mpu = 0x4a004160,
+	.cm_idlest_dpll_mpu = 0x4a004164,
+	.cm_autoidle_dpll_mpu = 0x4a004168,
+	.cm_clksel_dpll_mpu = 0x4a00416c,
+	.cm_div_m2_dpll_mpu = 0x4a004170,
+	.cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+	.cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+	.cm_bypclk_dpll_mpu = 0x4a00419c,
+	.cm_clkmode_dpll_iva = 0x4a0041a0,
+	.cm_idlest_dpll_iva = 0x4a0041a4,
+	.cm_autoidle_dpll_iva = 0x4a0041a8,
+	.cm_clksel_dpll_iva = 0x4a0041ac,
+	.cm_div_h11_dpll_iva = 0x4a0041b8,
+	.cm_div_h12_dpll_iva = 0x4a0041bc,
+	.cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+	.cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+	.cm_bypclk_dpll_iva = 0x4a0041dc,
+	.cm_clkmode_dpll_abe = 0x4a0041e0,
+	.cm_idlest_dpll_abe = 0x4a0041e4,
+	.cm_autoidle_dpll_abe = 0x4a0041e8,
+	.cm_clksel_dpll_abe = 0x4a0041ec,
+	.cm_div_m2_dpll_abe = 0x4a0041f0,
+	.cm_div_m3_dpll_abe = 0x4a0041f4,
+	.cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+	.cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+	.cm_clkmode_dpll_ddrphy = 0x4a004220,
+	.cm_idlest_dpll_ddrphy = 0x4a004224,
+	.cm_autoidle_dpll_ddrphy = 0x4a004228,
+	.cm_clksel_dpll_ddrphy = 0x4a00422c,
+	.cm_div_m2_dpll_ddrphy = 0x4a004230,
+	.cm_div_h11_dpll_ddrphy = 0x4a004238,
+	.cm_div_h12_dpll_ddrphy = 0x4a00423c,
+	.cm_div_h13_dpll_ddrphy = 0x4a004240,
+	.cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+	.cm_shadow_freq_config1 = 0x4a004260,
+	.cm_mpu_mpu_clkctrl = 0x4a004320,
+
+	/* cm1.dsp */
+	.cm_dsp_clkstctrl = 0x4a004400,
+	.cm_dsp_dsp_clkctrl = 0x4a004420,
+
+	/* cm1.abe */
+	.cm1_abe_clkstctrl = 0x4a004500,
+	.cm1_abe_l4abe_clkctrl = 0x4a004520,
+	.cm1_abe_aess_clkctrl = 0x4a004528,
+	.cm1_abe_pdm_clkctrl = 0x4a004530,
+	.cm1_abe_dmic_clkctrl = 0x4a004538,
+	.cm1_abe_mcasp_clkctrl = 0x4a004540,
+	.cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+	.cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+	.cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+	.cm1_abe_slimbus_clkctrl = 0x4a004560,
+	.cm1_abe_timer5_clkctrl = 0x4a004568,
+	.cm1_abe_timer6_clkctrl = 0x4a004570,
+	.cm1_abe_timer7_clkctrl = 0x4a004578,
+	.cm1_abe_timer8_clkctrl = 0x4a004580,
+	.cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+	/* cm2.ckgen */
+	.cm_clksel_mpu_m3_iss_root = 0x4a008100,
+	.cm_clksel_usb_60mhz = 0x4a008104,
+	.cm_scale_fclk = 0x4a008108,
+	.cm_core_dvfs_perf1 = 0x4a008110,
+	.cm_core_dvfs_perf2 = 0x4a008114,
+	.cm_core_dvfs_perf3 = 0x4a008118,
+	.cm_core_dvfs_perf4 = 0x4a00811c,
+	.cm_core_dvfs_current = 0x4a008124,
+	.cm_iva_dvfs_perf_tesla = 0x4a008128,
+	.cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+	.cm_iva_dvfs_perf_abe = 0x4a008130,
+	.cm_iva_dvfs_current = 0x4a008138,
+	.cm_clkmode_dpll_per = 0x4a008140,
+	.cm_idlest_dpll_per = 0x4a008144,
+	.cm_autoidle_dpll_per = 0x4a008148,
+	.cm_clksel_dpll_per = 0x4a00814c,
+	.cm_div_m2_dpll_per = 0x4a008150,
+	.cm_div_m3_dpll_per = 0x4a008154,
+	.cm_div_h11_dpll_per = 0x4a008158,
+	.cm_div_h12_dpll_per = 0x4a00815c,
+	.cm_div_h13_dpll_per = 0x4a008160,
+	.cm_div_h14_dpll_per = 0x4a008164,
+	.cm_ssc_deltamstep_dpll_per = 0x4a008168,
+	.cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+	.cm_emu_override_dpll_per = 0x4a008170,
+	.cm_clkmode_dpll_usb = 0x4a008180,
+	.cm_idlest_dpll_usb = 0x4a008184,
+	.cm_autoidle_dpll_usb = 0x4a008188,
+	.cm_clksel_dpll_usb = 0x4a00818c,
+	.cm_div_m2_dpll_usb = 0x4a008190,
+	.cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+	.cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+	.cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+	.cm_clkmode_dpll_unipro = 0x4a0081c0,
+	.cm_idlest_dpll_unipro = 0x4a0081c4,
+	.cm_autoidle_dpll_unipro = 0x4a0081c8,
+	.cm_clksel_dpll_unipro = 0x4a0081cc,
+	.cm_div_m2_dpll_unipro = 0x4a0081d0,
+	.cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+	.cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+	.cm_coreaon_usb_phy1_core_clkctrl = 0x4A008640,
+	.cm_coreaon_bandgap_clkctrl = 0x4a008648,
+	.cm_coreaon_io_srcomp_clkctrl = 0x4a008650,
+
+	/* cm2.core */
+	.cm_l3_1_clkstctrl = 0x4a008700,
+	.cm_l3_1_dynamicdep = 0x4a008708,
+	.cm_l3_1_l3_1_clkctrl = 0x4a008720,
+	.cm_l3_2_clkstctrl = 0x4a008800,
+	.cm_l3_2_dynamicdep = 0x4a008808,
+	.cm_l3_2_l3_2_clkctrl = 0x4a008820,
+	.cm_l3_gpmc_clkctrl = 0x4a008828,
+	.cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+	.cm_mpu_m3_clkstctrl = 0x4a008900,
+	.cm_mpu_m3_staticdep = 0x4a008904,
+	.cm_mpu_m3_dynamicdep = 0x4a008908,
+	.cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+	.cm_sdma_clkstctrl = 0x4a008a00,
+	.cm_sdma_staticdep = 0x4a008a04,
+	.cm_sdma_dynamicdep = 0x4a008a08,
+	.cm_sdma_sdma_clkctrl = 0x4a008a20,
+	.cm_memif_clkstctrl = 0x4a008b00,
+	.cm_memif_dmm_clkctrl = 0x4a008b20,
+	.cm_memif_emif_fw_clkctrl = 0x4a008b28,
+	.cm_memif_emif_1_clkctrl = 0x4a008b30,
+	.cm_memif_emif_2_clkctrl = 0x4a008b38,
+	.cm_memif_dll_clkctrl = 0x4a008b40,
+	.cm_memif_emif_h1_clkctrl = 0x4a008b50,
+	.cm_memif_emif_h2_clkctrl = 0x4a008b58,
+	.cm_memif_dll_h_clkctrl = 0x4a008b60,
+	.cm_c2c_clkstctrl = 0x4a008c00,
+	.cm_c2c_staticdep = 0x4a008c04,
+	.cm_c2c_dynamicdep = 0x4a008c08,
+	.cm_c2c_sad2d_clkctrl = 0x4a008c20,
+	.cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+	.cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+	.cm_l4cfg_clkstctrl = 0x4a008d00,
+	.cm_l4cfg_dynamicdep = 0x4a008d08,
+	.cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+	.cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+	.cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+	.cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+	.cm_l3instr_clkstctrl = 0x4a008e00,
+	.cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+	.cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+	.cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40,
+	.cm_l4per_clkstctrl = 0x4a009000,
+	.cm_l4per_dynamicdep = 0x4a009008,
+	.cm_l4per_adc_clkctrl = 0x4a009020,
+	.cm_l4per_gptimer10_clkctrl = 0x4a009028,
+	.cm_l4per_gptimer11_clkctrl = 0x4a009030,
+	.cm_l4per_gptimer2_clkctrl = 0x4a009038,
+	.cm_l4per_gptimer3_clkctrl = 0x4a009040,
+	.cm_l4per_gptimer4_clkctrl = 0x4a009048,
+	.cm_l4per_gptimer9_clkctrl = 0x4a009050,
+	.cm_l4per_elm_clkctrl = 0x4a009058,
+	.cm_l4per_gpio2_clkctrl = 0x4a009060,
+	.cm_l4per_gpio3_clkctrl = 0x4a009068,
+	.cm_l4per_gpio4_clkctrl = 0x4a009070,
+	.cm_l4per_gpio5_clkctrl = 0x4a009078,
+	.cm_l4per_gpio6_clkctrl = 0x4a009080,
+	.cm_l4per_hdq1w_clkctrl = 0x4a009088,
+	.cm_l4per_hecc1_clkctrl = 0x4a009090,
+	.cm_l4per_hecc2_clkctrl = 0x4a009098,
+	.cm_l4per_i2c1_clkctrl = 0x4a0090a0,
+	.cm_l4per_i2c2_clkctrl = 0x4a0090a8,
+	.cm_l4per_i2c3_clkctrl = 0x4a0090b0,
+	.cm_l4per_i2c4_clkctrl = 0x4a0090b8,
+	.cm_l4per_l4per_clkctrl = 0x4a0090c0,
+	.cm_l4per_mcasp2_clkctrl = 0x4a0090d0,
+	.cm_l4per_mcasp3_clkctrl = 0x4a0090d8,
+	.cm_l4per_mgate_clkctrl = 0x4a0090e8,
+	.cm_l4per_mcspi1_clkctrl = 0x4a0090f0,
+	.cm_l4per_mcspi2_clkctrl = 0x4a0090f8,
+	.cm_l4per_mcspi3_clkctrl = 0x4a009100,
+	.cm_l4per_mcspi4_clkctrl = 0x4a009108,
+	.cm_l4per_gpio7_clkctrl = 0x4a009110,
+	.cm_l4per_gpio8_clkctrl = 0x4a009118,
+	.cm_l4per_mmcsd3_clkctrl = 0x4a009120,
+	.cm_l4per_mmcsd4_clkctrl = 0x4a009128,
+	.cm_l4per_msprohg_clkctrl = 0x4a009130,
+	.cm_l4per_slimbus2_clkctrl = 0x4a009138,
+	.cm_l4per_uart1_clkctrl = 0x4a009140,
+	.cm_l4per_uart2_clkctrl = 0x4a009148,
+	.cm_l4per_uart3_clkctrl = 0x4a009150,
+	.cm_l4per_uart4_clkctrl = 0x4a009158,
+	.cm_l4per_mmcsd5_clkctrl = 0x4a009160,
+	.cm_l4per_i2c5_clkctrl = 0x4a009168,
+	.cm_l4per_uart5_clkctrl = 0x4a009170,
+	.cm_l4per_uart6_clkctrl = 0x4a009178,
+	.cm_l4sec_clkstctrl = 0x4a009180,
+	.cm_l4sec_staticdep = 0x4a009184,
+	.cm_l4sec_dynamicdep = 0x4a009188,
+	.cm_l4sec_aes1_clkctrl = 0x4a0091a0,
+	.cm_l4sec_aes2_clkctrl = 0x4a0091a8,
+	.cm_l4sec_des3des_clkctrl = 0x4a0091b0,
+	.cm_l4sec_pkaeip29_clkctrl = 0x4a0091b8,
+	.cm_l4sec_rng_clkctrl = 0x4a0091c0,
+	.cm_l4sec_sha2md51_clkctrl = 0x4a0091c8,
+	.cm_l4sec_cryptodma_clkctrl = 0x4a0091d8,
+
+	/* cm2.ivahd */
+	.cm_ivahd_clkstctrl = 0x4a009200,
+	.cm_ivahd_ivahd_clkctrl = 0x4a009220,
+	.cm_ivahd_sl2_clkctrl = 0x4a009228,
+
+	/* cm2.cam */
+	.cm_cam_clkstctrl = 0x4a009300,
+	.cm_cam_iss_clkctrl = 0x4a009320,
+	.cm_cam_fdif_clkctrl = 0x4a009328,
+
+	/* cm2.dss */
+	.cm_dss_clkstctrl = 0x4a009400,
+	.cm_dss_dss_clkctrl = 0x4a009420,
+
+	/* cm2.sgx */
+	.cm_sgx_clkstctrl = 0x4a009500,
+	.cm_sgx_sgx_clkctrl = 0x4a009520,
+
+	/* cm2.l3init */
+	.cm_l3init_clkstctrl = 0x4a009600,
+
+	/* cm2.l3init */
+	.cm_l3init_hsmmc1_clkctrl = 0x4a009628,
+	.cm_l3init_hsmmc2_clkctrl = 0x4a009630,
+	.cm_l3init_hsi_clkctrl = 0x4a009638,
+	.cm_l3init_hsusbhost_clkctrl = 0x4a009658,
+	.cm_l3init_hsusbotg_clkctrl = 0x4a009660,
+	.cm_l3init_hsusbtll_clkctrl = 0x4a009668,
+	.cm_l3init_p1500_clkctrl = 0x4a009678,
+	.cm_l3init_sata_clkctrl = 0x4a009688,
+	.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
+	.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
+	.cm_l3init_ocp2scp3_clkctrl = 0x4a0096e8,
+	.cm_l3init_usb_otg_ss1_clkctrl = 0x4a0096f0,
+
+	/* prm irqstatus regs */
+	.prm_irqstatus_mpu = 0x4ae06010,
+	.prm_irqstatus_mpu_2 = 0x4ae06014,
+
+	/* l4 wkup regs */
+	.cm_abe_pll_ref_clksel = 0x4ae0610c,
+	.cm_sys_clksel = 0x4ae06110,
+	.cm_wkup_clkstctrl = 0x4ae07900,
+	.cm_wkup_l4wkup_clkctrl = 0x4ae07920,
+	.cm_wkup_wdtimer1_clkctrl = 0x4ae07928,
+	.cm_wkup_wdtimer2_clkctrl = 0x4ae07930,
+	.cm_wkup_gpio1_clkctrl = 0x4ae07938,
+	.cm_wkup_gptimer1_clkctrl = 0x4ae07940,
+	.cm_wkup_gptimer12_clkctrl = 0x4ae07948,
+	.cm_wkup_synctimer_clkctrl = 0x4ae07950,
+	.cm_wkup_usim_clkctrl = 0x4ae07958,
+	.cm_wkup_sarram_clkctrl = 0x4ae07960,
+	.cm_wkup_keyboard_clkctrl = 0x4ae07978,
+	.cm_wkup_rtc_clkctrl = 0x4ae07980,
+	.cm_wkup_bandgap_clkctrl = 0x4ae07988,
+	.cm_wkupaon_scrm_clkctrl = 0x4ae07990,
+	.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998,
+	.prm_rstctrl = 0x4ae07c00,
+	.prm_rstst = 0x4ae07c04,
+	.prm_rsttime = 0x4ae07c08,
+	.prm_vc_val_bypass = 0x4ae07ca0,
+	.prm_vc_cfg_i2c_mode = 0x4ae07cb4,
+	.prm_vc_cfg_i2c_clk = 0x4ae07cb8,
+
+	.prm_abbldo_mpu_setup = 0x4ae07cdc,
+	.prm_abbldo_mpu_ctrl = 0x4ae07ce0,
+	.prm_abbldo_mm_setup = 0x4ae07ce4,
+	.prm_abbldo_mm_ctrl = 0x4ae07ce8,
+
+	/* SCRM stuff, used by some boards */
+	.scrm_auxclk0 = 0x4ae0a310,
+	.scrm_auxclk1 = 0x4ae0a314,
+};
+
+struct prcm_regs const dra7xx_prcm = {
+	/* cm1.ckgen */
+	.cm_clksel_core				= 0x4a005100,
+	.cm_clksel_abe				= 0x4a005108,
+	.cm_dll_ctrl				= 0x4a005110,
+	.cm_clkmode_dpll_core			= 0x4a005120,
+	.cm_idlest_dpll_core			= 0x4a005124,
+	.cm_autoidle_dpll_core			= 0x4a005128,
+	.cm_clksel_dpll_core			= 0x4a00512c,
+	.cm_div_m2_dpll_core			= 0x4a005130,
+	.cm_div_m3_dpll_core			= 0x4a005134,
+	.cm_div_h11_dpll_core			= 0x4a005138,
+	.cm_div_h12_dpll_core			= 0x4a00513c,
+	.cm_div_h13_dpll_core			= 0x4a005140,
+	.cm_div_h14_dpll_core			= 0x4a005144,
+	.cm_ssc_deltamstep_dpll_core		= 0x4a005148,
+	.cm_ssc_modfreqdiv_dpll_core		= 0x4a00514c,
+	.cm_div_h21_dpll_core			= 0x4a005150,
+	.cm_div_h22_dpllcore			= 0x4a005154,
+	.cm_div_h23_dpll_core			= 0x4a005158,
+	.cm_div_h24_dpll_core			= 0x4a00515c,
+	.cm_clkmode_dpll_mpu			= 0x4a005160,
+	.cm_idlest_dpll_mpu			= 0x4a005164,
+	.cm_autoidle_dpll_mpu			= 0x4a005168,
+	.cm_clksel_dpll_mpu			= 0x4a00516c,
+	.cm_div_m2_dpll_mpu			= 0x4a005170,
+	.cm_ssc_deltamstep_dpll_mpu		= 0x4a005188,
+	.cm_ssc_modfreqdiv_dpll_mpu		= 0x4a00518c,
+	.cm_bypclk_dpll_mpu			= 0x4a00519c,
+	.cm_clkmode_dpll_iva			= 0x4a0051a0,
+	.cm_idlest_dpll_iva			= 0x4a0051a4,
+	.cm_autoidle_dpll_iva			= 0x4a0051a8,
+	.cm_clksel_dpll_iva			= 0x4a0051ac,
+	.cm_ssc_deltamstep_dpll_iva		= 0x4a0051c8,
+	.cm_ssc_modfreqdiv_dpll_iva		= 0x4a0051cc,
+	.cm_bypclk_dpll_iva			= 0x4a0051dc,
+	.cm_clkmode_dpll_abe			= 0x4a0051e0,
+	.cm_idlest_dpll_abe			= 0x4a0051e4,
+	.cm_autoidle_dpll_abe			= 0x4a0051e8,
+	.cm_clksel_dpll_abe			= 0x4a0051ec,
+	.cm_div_m2_dpll_abe			= 0x4a0051f0,
+	.cm_div_m3_dpll_abe			= 0x4a0051f4,
+	.cm_ssc_deltamstep_dpll_abe		= 0x4a005208,
+	.cm_ssc_modfreqdiv_dpll_abe		= 0x4a00520c,
+	.cm_clkmode_dpll_ddrphy			= 0x4a005210,
+	.cm_idlest_dpll_ddrphy			= 0x4a005214,
+	.cm_autoidle_dpll_ddrphy		= 0x4a005218,
+	.cm_clksel_dpll_ddrphy			= 0x4a00521c,
+	.cm_div_m2_dpll_ddrphy			= 0x4a005220,
+	.cm_div_h11_dpll_ddrphy			= 0x4a005228,
+	.cm_ssc_deltamstep_dpll_ddrphy		= 0x4a00522c,
+	.cm_clkmode_dpll_dsp			= 0x4a005234,
+	.cm_shadow_freq_config1			= 0x4a005260,
+	.cm_clkmode_dpll_gmac			= 0x4a0052a8,
+	.cm_coreaon_usb_phy1_core_clkctrl	= 0x4a008640,
+	.cm_coreaon_usb_phy2_core_clkctrl	= 0x4a008688,
+	.cm_coreaon_usb_phy3_core_clkctrl	= 0x4a008698,
+	.cm_coreaon_l3init_60m_gfclk_clkctrl	= 0x4a0086c0,
+
+	/* cm1.mpu */
+	.cm_mpu_mpu_clkctrl			= 0x4a005320,
+
+	/* cm1.dsp */
+	.cm_dsp_clkstctrl			= 0x4a005400,
+	.cm_dsp_dsp_clkctrl			= 0x4a005420,
+
+	/* cm IPU */
+	.cm_ipu_clkstctrl			= 0x4a005540,
+	.cm_ipu_i2c5_clkctrl			= 0x4a005578,
+
+	/* prm irqstatus regs */
+	.prm_irqstatus_mpu			= 0x4ae06010,
+	.prm_irqstatus_mpu_2			= 0x4ae06014,
+
+	/* cm2.ckgen */
+	.cm_clksel_usb_60mhz			= 0x4a008104,
+	.cm_clkmode_dpll_per			= 0x4a008140,
+	.cm_idlest_dpll_per			= 0x4a008144,
+	.cm_autoidle_dpll_per			= 0x4a008148,
+	.cm_clksel_dpll_per			= 0x4a00814c,
+	.cm_div_m2_dpll_per			= 0x4a008150,
+	.cm_div_m3_dpll_per			= 0x4a008154,
+	.cm_div_h11_dpll_per			= 0x4a008158,
+	.cm_div_h12_dpll_per			= 0x4a00815c,
+	.cm_div_h13_dpll_per			= 0x4a008160,
+	.cm_div_h14_dpll_per			= 0x4a008164,
+	.cm_ssc_deltamstep_dpll_per		= 0x4a008168,
+	.cm_ssc_modfreqdiv_dpll_per		= 0x4a00816c,
+	.cm_clkmode_dpll_usb			= 0x4a008180,
+	.cm_idlest_dpll_usb			= 0x4a008184,
+	.cm_autoidle_dpll_usb			= 0x4a008188,
+	.cm_clksel_dpll_usb			= 0x4a00818c,
+	.cm_div_m2_dpll_usb			= 0x4a008190,
+	.cm_ssc_deltamstep_dpll_usb		= 0x4a0081a8,
+	.cm_ssc_modfreqdiv_dpll_usb		= 0x4a0081ac,
+	.cm_clkdcoldo_dpll_usb			= 0x4a0081b4,
+	.cm_clkmode_dpll_pcie_ref		= 0x4a008200,
+	.cm_clkmode_apll_pcie			= 0x4a00821c,
+	.cm_idlest_apll_pcie			= 0x4a008220,
+	.cm_div_m2_apll_pcie			= 0x4a008224,
+	.cm_clkvcoldo_apll_pcie			= 0x4a008228,
+
+	/* cm2.core */
+	.cm_l3_1_clkstctrl			= 0x4a008700,
+	.cm_l3_1_dynamicdep			= 0x4a008708,
+	.cm_l3_1_l3_1_clkctrl			= 0x4a008720,
+	.cm_l3_gpmc_clkctrl			= 0x4a008728,
+	.cm_mpu_m3_clkstctrl			= 0x4a008900,
+	.cm_mpu_m3_staticdep			= 0x4a008904,
+	.cm_mpu_m3_dynamicdep			= 0x4a008908,
+	.cm_mpu_m3_mpu_m3_clkctrl		= 0x4a008920,
+	.cm_sdma_clkstctrl			= 0x4a008a00,
+	.cm_sdma_staticdep			= 0x4a008a04,
+	.cm_sdma_dynamicdep			= 0x4a008a08,
+	.cm_sdma_sdma_clkctrl			= 0x4a008a20,
+	.cm_memif_clkstctrl			= 0x4a008b00,
+	.cm_memif_dmm_clkctrl			= 0x4a008b20,
+	.cm_memif_emif_fw_clkctrl		= 0x4a008b28,
+	.cm_memif_emif_1_clkctrl		= 0x4a008b30,
+	.cm_memif_emif_2_clkctrl		= 0x4a008b38,
+	.cm_memif_dll_clkctrl			= 0x4a008b40,
+	.cm_l4cfg_clkstctrl			= 0x4a008d00,
+	.cm_l4cfg_dynamicdep			= 0x4a008d08,
+	.cm_l4cfg_l4_cfg_clkctrl		= 0x4a008d20,
+	.cm_l4cfg_hw_sem_clkctrl		= 0x4a008d28,
+	.cm_l4cfg_mailbox_clkctrl		= 0x4a008d30,
+	.cm_l4cfg_sar_rom_clkctrl		= 0x4a008d38,
+	.cm_l3instr_clkstctrl			= 0x4a008e00,
+	.cm_l3instr_l3_3_clkctrl		= 0x4a008e20,
+	.cm_l3instr_l3_instr_clkctrl		= 0x4a008e28,
+	.cm_l3instr_intrconn_wp1_clkctrl	= 0x4a008e40,
+
+	/* cm2.ivahd */
+	.cm_ivahd_clkstctrl			= 0x4a008f00,
+	.cm_ivahd_ivahd_clkctrl			= 0x4a008f20,
+	.cm_ivahd_sl2_clkctrl			= 0x4a008f28,
+
+	/* cm2.cam */
+	.cm_cam_clkstctrl			= 0x4a009000,
+	.cm_cam_vip1_clkctrl			= 0x4a009020,
+	.cm_cam_vip2_clkctrl			= 0x4a009028,
+	.cm_cam_vip3_clkctrl			= 0x4a009030,
+	.cm_cam_lvdsrx_clkctrl			= 0x4a009038,
+	.cm_cam_csi1_clkctrl			= 0x4a009040,
+	.cm_cam_csi2_clkctrl			= 0x4a009048,
+
+	/* cm2.dss */
+	.cm_dss_clkstctrl			= 0x4a009100,
+	.cm_dss_dss_clkctrl			= 0x4a009120,
+
+	/* cm2.sgx */
+	.cm_sgx_clkstctrl			= 0x4a009200,
+	.cm_sgx_sgx_clkctrl			= 0x4a009220,
+
+	/* cm2.l3init */
+	.cm_l3init_clkstctrl			= 0x4a009300,
+
+	/* cm2.l3init */
+	.cm_l3init_hsmmc1_clkctrl		= 0x4a009328,
+	.cm_l3init_hsmmc2_clkctrl		= 0x4a009330,
+	.cm_l3init_hsusbhost_clkctrl		= 0x4a009340,
+	.cm_l3init_hsusbotg_clkctrl		= 0x4a009348,
+	.cm_l3init_hsusbtll_clkctrl		= 0x4a009350,
+	.cm_l3init_sata_clkctrl			= 0x4a009388,
+	.cm_gmac_clkstctrl			= 0x4a0093c0,
+	.cm_gmac_gmac_clkctrl			= 0x4a0093d0,
+	.cm_l3init_ocp2scp1_clkctrl		= 0x4a0093e0,
+	.cm_l3init_ocp2scp3_clkctrl		= 0x4a0093e8,
+	.cm_l3init_usb_otg_ss1_clkctrl		= 0x4a0093f0,
+	.cm_l3init_usb_otg_ss2_clkctrl		= 0x4a009340,
+
+	/* cm2.l4per */
+	.cm_l4per_clkstctrl			= 0x4a009700,
+	.cm_l4per_dynamicdep			= 0x4a009708,
+	.cm_l4per_gptimer10_clkctrl		= 0x4a009728,
+	.cm_l4per_gptimer11_clkctrl		= 0x4a009730,
+	.cm_l4per_gptimer2_clkctrl		= 0x4a009738,
+	.cm_l4per_gptimer3_clkctrl		= 0x4a009740,
+	.cm_l4per_gptimer4_clkctrl		= 0x4a009748,
+	.cm_l4per_gptimer9_clkctrl		= 0x4a009750,
+	.cm_l4per_elm_clkctrl			= 0x4a009758,
+	.cm_l4per_gpio2_clkctrl			= 0x4a009760,
+	.cm_l4per_gpio3_clkctrl			= 0x4a009768,
+	.cm_l4per_gpio4_clkctrl			= 0x4a009770,
+	.cm_l4per_gpio5_clkctrl			= 0x4a009778,
+	.cm_l4per_gpio6_clkctrl			= 0x4a009780,
+	.cm_l4per_hdq1w_clkctrl			= 0x4a009788,
+	.cm_l4per_i2c1_clkctrl			= 0x4a0097a0,
+	.cm_l4per_i2c2_clkctrl			= 0x4a0097a8,
+	.cm_l4per_i2c3_clkctrl			= 0x4a0097b0,
+	.cm_l4per_i2c4_clkctrl			= 0x4a0097b8,
+	.cm_l4per_l4per_clkctrl			= 0x4a0097c0,
+	.cm_l4per_mcspi1_clkctrl		= 0x4a0097f0,
+	.cm_l4per_mcspi2_clkctrl		= 0x4a0097f8,
+	.cm_l4per_mcspi3_clkctrl		= 0x4a009800,
+	.cm_l4per_mcspi4_clkctrl		= 0x4a009808,
+	.cm_l4per_gpio7_clkctrl			= 0x4a009810,
+	.cm_l4per_gpio8_clkctrl			= 0x4a009818,
+	.cm_l4per_mmcsd3_clkctrl		= 0x4a009820,
+	.cm_l4per_mmcsd4_clkctrl		= 0x4a009828,
+	.cm_l4per_qspi_clkctrl			= 0x4a009838,
+	.cm_l4per_uart1_clkctrl			= 0x4a009840,
+	.cm_l4per_uart2_clkctrl			= 0x4a009848,
+	.cm_l4per_uart3_clkctrl			= 0x4a009850,
+	.cm_l4per_uart4_clkctrl			= 0x4a009858,
+	.cm_l4per_uart5_clkctrl			= 0x4a009870,
+	.cm_l4sec_clkstctrl			= 0x4a009880,
+	.cm_l4sec_staticdep			= 0x4a009884,
+	.cm_l4sec_dynamicdep			= 0x4a009888,
+	.cm_l4sec_aes1_clkctrl			= 0x4a0098a0,
+	.cm_l4sec_aes2_clkctrl			= 0x4a0098a8,
+	.cm_l4sec_des3des_clkctrl		= 0x4a0098b0,
+	.cm_l4sec_rng_clkctrl			= 0x4a0098c0,
+	.cm_l4sec_sha2md51_clkctrl		= 0x4a0098c8,
+	.cm_l4sec_cryptodma_clkctrl		= 0x4a0098d8,
+
+	/* l4 wkup regs */
+	.cm_abe_pll_ref_clksel			= 0x4ae0610c,
+	.cm_sys_clksel				= 0x4ae06110,
+	.cm_abe_pll_sys_clksel			= 0x4ae06118,
+	.cm_wkup_clkstctrl			= 0x4ae07800,
+	.cm_wkup_l4wkup_clkctrl			= 0x4ae07820,
+	.cm_wkup_wdtimer1_clkctrl		= 0x4ae07828,
+	.cm_wkup_wdtimer2_clkctrl		= 0x4ae07830,
+	.cm_wkup_gpio1_clkctrl			= 0x4ae07838,
+	.cm_wkup_gptimer1_clkctrl		= 0x4ae07840,
+	.cm_wkup_gptimer12_clkctrl		= 0x4ae07848,
+	.cm_wkup_sarram_clkctrl			= 0x4ae07860,
+	.cm_wkup_keyboard_clkctrl		= 0x4ae07878,
+	.cm_wkupaon_scrm_clkctrl		= 0x4ae07890,
+	.prm_rstctrl				= 0x4ae07d00,
+	.prm_rstst				= 0x4ae07d04,
+	.prm_rsttime				= 0x4ae07d08,
+	.prm_io_pmctrl				= 0x4ae07d20,
+	.prm_vc_val_bypass			= 0x4ae07da0,
+	.prm_vc_cfg_i2c_mode			= 0x4ae07db4,
+	.prm_vc_cfg_i2c_clk			= 0x4ae07db8,
+
+	.prm_abbldo_mpu_setup			= 0x4AE07DDC,
+	.prm_abbldo_mpu_ctrl			= 0x4AE07DE0,
+	.prm_abbldo_iva_setup			= 0x4AE07E34,
+	.prm_abbldo_iva_ctrl			= 0x4AE07E24,
+	.prm_abbldo_eve_setup			= 0x4AE07E30,
+	.prm_abbldo_eve_ctrl			= 0x4AE07E20,
+	.prm_abbldo_gpu_setup			= 0x4AE07DE4,
+	.prm_abbldo_gpu_ctrl			= 0x4AE07DE8,
+
+	/*l3main1 edma*/
+	.cm_l3main1_tptc1_clkctrl               = 0x4a008778,
+	.cm_l3main1_tptc2_clkctrl               = 0x4a008780,
+};
+
+void clrset_spare_register(u8 spare_type, u32 clear_bits, u32 set_bits)
+{
+	u32 reg = spare_type ? (*ctrl)->ctrl_core_sma_sw_1 :
+		(*ctrl)->ctrl_core_sma_sw_0;
+	clrsetbits_le32(reg, clear_bits, set_bits);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/sdram.c b/roms/u-boot/arch/arm/mach-omap2/omap5/sdram.c
new file mode 100644
index 000000000..786da45fa
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/sdram.c
@@ -0,0 +1,750 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Timing and Organization details of the ddr device parts used in OMAP5
+ * EVM
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * This file provides details of the LPDDR2 SDRAM parts used on OMAP5
+ * EVM. Since the parts used and geometry are identical for
+ * evm for a given OMAP5 revision, this information is kept
+ * here instead of being in board directory. However the key functions
+ * exported are weakly linked so that they can be over-ridden in the board
+ * directory if there is a OMAP5 board in the future that uses a different
+ * memory device or geometry.
+ *
+ * For any new board with different memory devices over-ride one or more
+ * of the following functions as per the CONFIG flags you intend to enable:
+ * - emif_get_reg_dump()
+ * - emif_get_dmm_regs()
+ * - emif_get_device_details()
+ * - emif_get_device_timings()
+ */
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+const struct emif_regs emif_regs_532_mhz_2cs = {
+	.sdram_config_init		= 0x80800EBA,
+	.sdram_config			= 0x808022BA,
+	.ref_ctrl			= 0x0000081A,
+	.sdram_tim1			= 0x772F6873,
+	.sdram_tim2			= 0x304a129a,
+	.sdram_tim3			= 0x02f7e45f,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x000b3215,
+	.temp_alert_config		= 0x08000a05,
+	.emif_ddr_phy_ctlr_1_init	= 0x0E28420d,
+	.emif_ddr_phy_ctlr_1		= 0x0E28420d,
+	.emif_ddr_ext_phy_ctrl_1	= 0x04020080,
+	.emif_ddr_ext_phy_ctrl_2	= 0x28C518A3,
+	.emif_ddr_ext_phy_ctrl_3	= 0x518A3146,
+	.emif_ddr_ext_phy_ctrl_4	= 0x0014628C,
+	.emif_ddr_ext_phy_ctrl_5	= 0x04010040
+};
+
+const struct emif_regs emif_regs_532_mhz_2cs_es2 = {
+	.sdram_config_init		= 0x80800EBA,
+	.sdram_config			= 0x808022BA,
+	.ref_ctrl			= 0x0000081A,
+	.sdram_tim1			= 0x772F6873,
+	.sdram_tim2			= 0x304a129a,
+	.sdram_tim3			= 0x02f7e45f,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x100b3215,
+	.temp_alert_config		= 0x08000a05,
+	.emif_ddr_phy_ctlr_1_init	= 0x0E30400d,
+	.emif_ddr_phy_ctlr_1		= 0x0E30400d,
+	.emif_ddr_ext_phy_ctrl_1	= 0x04020080,
+	.emif_ddr_ext_phy_ctrl_2	= 0x28C518A3,
+	.emif_ddr_ext_phy_ctrl_3	= 0x518A3146,
+	.emif_ddr_ext_phy_ctrl_4	= 0x0014628C,
+	.emif_ddr_ext_phy_ctrl_5	= 0xC330CC33,
+};
+
+const struct emif_regs emif_regs_266_mhz_2cs = {
+	.sdram_config_init		= 0x80800EBA,
+	.sdram_config			= 0x808022BA,
+	.ref_ctrl			= 0x0000040D,
+	.sdram_tim1			= 0x2A86B419,
+	.sdram_tim2			= 0x1025094A,
+	.sdram_tim3			= 0x026BA22F,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x000b3215,
+	.temp_alert_config		= 0x08000a05,
+	.emif_ddr_phy_ctlr_1_init	= 0x0E28420d,
+	.emif_ddr_phy_ctlr_1		= 0x0E28420d,
+	.emif_ddr_ext_phy_ctrl_1	= 0x04020080,
+	.emif_ddr_ext_phy_ctrl_2	= 0x0A414829,
+	.emif_ddr_ext_phy_ctrl_3	= 0x14829052,
+	.emif_ddr_ext_phy_ctrl_4	= 0x000520A4,
+	.emif_ddr_ext_phy_ctrl_5	= 0x04010040
+};
+
+const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
+	.sdram_config_init		= 0x61851B32,
+	.sdram_config			= 0x61851B32,
+	.sdram_config2			= 0x0,
+	.ref_ctrl			= 0x00001035,
+	.sdram_tim1			= 0xCCCF36B3,
+	.sdram_tim2			= 0x308F7FDA,
+	.sdram_tim3			= 0x027F88A8,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x0007190B,
+	.temp_alert_config		= 0x00000000,
+	.emif_ddr_phy_ctlr_1_init	= 0x0020420A,
+	.emif_ddr_phy_ctlr_1		= 0x0024420A,
+	.emif_ddr_ext_phy_ctrl_1	= 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2	= 0x00000000,
+	.emif_ddr_ext_phy_ctrl_3	= 0x00000000,
+	.emif_ddr_ext_phy_ctrl_4	= 0x00000000,
+	.emif_ddr_ext_phy_ctrl_5	= 0x04010040,
+	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
+	.emif_rd_wr_lvl_ctl		= 0x00000000,
+	.emif_rd_wr_exec_thresh		= 0x00000305
+};
+
+const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
+	.sdram_config_init              = 0x61851B32,
+	.sdram_config                   = 0x61851B32,
+	.sdram_config2			= 0x0,
+	.ref_ctrl                       = 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x027F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x1007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0030400A,
+	.emif_ddr_phy_ctlr_1            = 0x0034400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_4        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_5        = 0x4350D435,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x40000305
+};
+
+const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x0,
+	.dmm_lisa_map_2 = 0x80740300,
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+	switch (omap_revision()) {
+	case OMAP5430_ES1_0:
+		*regs = &emif_regs_532_mhz_2cs;
+		break;
+	case OMAP5432_ES1_0:
+		*regs = &emif_regs_ddr3_532_mhz_1cs;
+		break;
+	case OMAP5430_ES2_0:
+		*regs = &emif_regs_532_mhz_2cs_es2;
+		break;
+	case OMAP5432_ES2_0:
+	default:
+		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+		break;
+	}
+}
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+	__attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+						**dmm_lisa_regs)
+{
+	switch (omap_revision()) {
+	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
+	case OMAP5432_ES1_0:
+	case OMAP5432_ES2_0:
+	default:
+		*dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
+		break;
+	}
+
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+	__attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+#else
+
+static const struct lpddr2_device_details dev_4G_S4_details = {
+	.type		= LPDDR2_TYPE_S4,
+	.density	= LPDDR2_DENSITY_4Gb,
+	.io_width	= LPDDR2_IO_WIDTH_32,
+	.manufacturer	= LPDDR2_MANUFACTURER_SAMSUNG
+};
+
+static void emif_get_device_details_sdp(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+{
+	/* EMIF1 & EMIF2 have identical configuration */
+	*cs0_device_details = dev_4G_S4_details;
+	*cs1_device_details = dev_4G_S4_details;
+}
+
+void emif_get_device_details(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+	__attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+const u32 ext_phy_ctrl_const_base[] = {
+	0x01004010,
+	0x00001004,
+	0x04010040,
+	0x01004010,
+	0x00001004,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x80080080,
+	0x00800800,
+	0x08102040,
+	0x00000001,
+	0x540A8150,
+	0xA81502a0,
+	0x002A0540,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000077,
+	0x0
+};
+
+const u32 ddr3_ext_phy_ctrl_const_base_es1[] = {
+	0x01004010,
+	0x00001004,
+	0x04010040,
+	0x01004010,
+	0x00001004,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x80080080,
+	0x00800800,
+	0x08102040,
+	0x00000002,
+	0x0,
+	0x0,
+	0x0,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000057,
+	0x0
+};
+
+const u32 ddr3_ext_phy_ctrl_const_base_es2[] = {
+	0x50D4350D,
+	0x00000D43,
+	0x04010040,
+	0x01004010,
+	0x00001004,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x80080080,
+	0x00800800,
+	0x08102040,
+	0x00000002,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000057,
+	0x0
+};
+
+/* Ext phy ctrl 1-35 regs */
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {
+	0x10040100,
+	0x00910091,
+	0x00950095,
+	0x009B009B,
+	0x009E009E,
+	0x00980098,
+	0x00340034,
+	0x00350035,
+	0x00340034,
+	0x00310031,
+	0x00340034,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x00480048,
+	0x004A004A,
+	0x00520052,
+	0x00550055,
+	0x00500050,
+	0x00000000,
+	0x00600020,
+	0x40011080,
+	0x08102040,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0
+};
+
+/* Ext phy ctrl 1-35 regs */
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = {
+	0x10040100,
+	0x00910091,
+	0x00950095,
+	0x009B009B,
+	0x009E009E,
+	0x00980098,
+	0x00330033,
+	0x00330033,
+	0x002F002F,
+	0x00320032,
+	0x00310031,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x00520052,
+	0x00520052,
+	0x00470047,
+	0x00490049,
+	0x00500050,
+	0x00000000,
+	0x00600020,
+	0x40011080,
+	0x08102040,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0
+};
+
+/* Ext phy ctrl 1-35 regs */
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_666MHz[] = {
+	0x10040100,
+	0x00A400A4,
+	0x00A900A9,
+	0x00B000B0,
+	0x00B000B0,
+	0x00A400A4,
+	0x00390039,
+	0x00320032,
+	0x00320032,
+	0x00320032,
+	0x00440044,
+	0x00550055,
+	0x00550055,
+	0x00550055,
+	0x00550055,
+	0x007F007F,
+	0x004D004D,
+	0x00430043,
+	0x00560056,
+	0x00540054,
+	0x00600060,
+	0x0,
+	0x00600020,
+	0x40010080,
+	0x08102040,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0
+};
+
+const u32 dra_ddr3_ext_phy_ctrl_const_base_666MHz_es2[] = {
+	0x04040100,
+	0x006B009F,
+	0x006B00A2,
+	0x006B00A8,
+	0x006B00A8,
+	0x006B00B2,
+	0x002F002F,
+	0x002F002F,
+	0x002F002F,
+	0x002F002F,
+	0x002F002F,
+	0x00600073,
+	0x00600071,
+	0x0060007C,
+	0x0060007E,
+	0x00600084,
+	0x00400053,
+	0x00400051,
+	0x0040005C,
+	0x0040005E,
+	0x00400064,
+	0x00800080,
+	0x00800080,
+	0x40010080,
+	0x08102040,
+	0x005B008F,
+	0x005B0092,
+	0x005B0098,
+	0x005B0098,
+	0x005B00A2,
+	0x00300043,
+	0x00300041,
+	0x0030004C,
+	0x0030004E,
+	0x00300054,
+	0x00000077
+};
+
+const struct lpddr2_mr_regs mr_regs = {
+	.mr1	= MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8,
+	.mr2	= 0x6,
+	.mr3	= 0x1,
+	.mr10	= MR10_ZQ_ZQINIT,
+	.mr16	= MR16_REF_FULL_ARRAY
+};
+
+void __weak emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
+					     const u32 **regs,
+					     u32 *size)
+{
+	switch (omap_revision()) {
+	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
+		*regs = ext_phy_ctrl_const_base;
+		*size = ARRAY_SIZE(ext_phy_ctrl_const_base);
+		break;
+	case OMAP5432_ES1_0:
+		*regs = ddr3_ext_phy_ctrl_const_base_es1;
+		*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es1);
+		break;
+	case OMAP5432_ES2_0:
+		*regs = ddr3_ext_phy_ctrl_const_base_es2;
+		*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
+		break;
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+	case DRA752_ES2_0:
+		if (emif_nr == 1) {
+			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
+			*size =
+			ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif1);
+		} else {
+			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2;
+			*size =
+			ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif2);
+		}
+		break;
+	case DRA722_ES1_0:
+		*regs = dra_ddr3_ext_phy_ctrl_const_base_666MHz;
+		*size = ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_666MHz);
+		break;
+	case DRA762_ES1_0:
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
+	case DRA722_ES2_0:
+	case DRA722_ES2_1:
+		*regs = dra_ddr3_ext_phy_ctrl_const_base_666MHz_es2;
+		*size = ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_666MHz_es2);
+		break;
+	default:
+		*regs = ddr3_ext_phy_ctrl_const_base_es2;
+		*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
+
+	}
+}
+
+void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
+{
+	*regs = &mr_regs;
+}
+
+static void do_ext_phy_settings_omap5(u32 base, const struct emif_regs *regs)
+{
+	u32 *ext_phy_ctrl_base = 0;
+	u32 *emif_ext_phy_ctrl_base = 0;
+	u32 emif_nr;
+	const u32 *ext_phy_ctrl_const_regs;
+	u32 i = 0;
+	u32 size;
+
+	emif_nr = (base == EMIF1_BASE) ? 1 : 2;
+
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
+	emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1);
+
+	/* Configure external phy control timing registers */
+	for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
+		writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
+		/* Update shadow registers */
+		writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
+	}
+
+	/*
+	 * external phy 6-24 registers do not change with
+	 * ddr frequency
+	 */
+	emif_get_ext_phy_ctrl_const_regs(emif_nr,
+					 &ext_phy_ctrl_const_regs, &size);
+
+	for (i = 0; i < size; i++) {
+		writel(ext_phy_ctrl_const_regs[i],
+		       emif_ext_phy_ctrl_base++);
+		/* Update shadow registers */
+		writel(ext_phy_ctrl_const_regs[i],
+		       emif_ext_phy_ctrl_base++);
+	}
+}
+
+static void do_ext_phy_settings_dra7(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+	u32 *emif_ext_phy_ctrl_base = 0;
+	u32 emif_nr;
+	const u32 *ext_phy_ctrl_const_regs;
+	u32 i, hw_leveling, size, phy;
+
+	emif_nr = (base == EMIF1_BASE) ? 1 : 2;
+
+	hw_leveling = regs->emif_rd_wr_lvl_rmp_ctl >> EMIF_REG_RDWRLVL_EN_SHIFT;
+	phy = regs->emif_ddr_phy_ctlr_1_init;
+
+	emif_ext_phy_ctrl_base = (u32 *)&(emif->emif_ddr_ext_phy_ctrl_1);
+
+	emif_get_ext_phy_ctrl_const_regs(emif_nr,
+					 &ext_phy_ctrl_const_regs, &size);
+
+	writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[0]);
+	writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[1]);
+
+	/*
+	 * Copy the predefined PHY register values
+	 * if leveling is disabled.
+	 */
+	if (phy & EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_MASK)
+		for (i = 1; i < 6; i++) {
+			writel(ext_phy_ctrl_const_regs[i],
+			       &emif_ext_phy_ctrl_base[i * 2]);
+			writel(ext_phy_ctrl_const_regs[i],
+			       &emif_ext_phy_ctrl_base[i * 2 + 1]);
+		}
+
+	if (phy & EMIF_DDR_PHY_CTRL_1_RDLVL_MASK_MASK)
+		for (i = 6; i < 11; i++) {
+			writel(ext_phy_ctrl_const_regs[i],
+			       &emif_ext_phy_ctrl_base[i * 2]);
+			writel(ext_phy_ctrl_const_regs[i],
+			       &emif_ext_phy_ctrl_base[i * 2 + 1]);
+		}
+
+	if (phy & EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_MASK)
+		for (i = 11; i < 25; i++) {
+			writel(ext_phy_ctrl_const_regs[i],
+			       &emif_ext_phy_ctrl_base[i * 2]);
+			writel(ext_phy_ctrl_const_regs[i],
+			       &emif_ext_phy_ctrl_base[i * 2 + 1]);
+		}
+
+	if (hw_leveling) {
+		/*
+		 * Write the init value for HW levling to occur
+		 */
+		for (i = 21; i < 35; i++) {
+			writel(ext_phy_ctrl_const_regs[i],
+			       &emif_ext_phy_ctrl_base[i * 2]);
+			writel(ext_phy_ctrl_const_regs[i],
+			       &emif_ext_phy_ctrl_base[i * 2 + 1]);
+		}
+	}
+}
+
+void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
+{
+	if (is_omap54xx())
+		do_ext_phy_settings_omap5(base, regs);
+	else
+		do_ext_phy_settings_dra7(base, regs);
+}
+
+#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+	.max_freq	= 532000000,
+	.RL		= 8,
+	.tRPab		= 21,
+	.tRCD		= 18,
+	.tWR		= 15,
+	.tRASmin	= 42,
+	.tRRD		= 10,
+	.tWTRx2		= 15,
+	.tXSR		= 140,
+	.tXPx2		= 15,
+	.tRFCab		= 130,
+	.tRTPx2		= 15,
+	.tCKE		= 3,
+	.tCKESR		= 15,
+	.tZQCS		= 90,
+	.tZQCL		= 360,
+	.tZQINIT	= 1000,
+	.tDQSCKMAXx2	= 11,
+	.tRASmax	= 70,
+	.tFAW		= 50
+};
+
+static const struct lpddr2_min_tck min_tck = {
+	.tRL		= 3,
+	.tRP_AB		= 3,
+	.tRCD		= 3,
+	.tWR		= 3,
+	.tRAS_MIN	= 3,
+	.tRRD		= 2,
+	.tWTR		= 2,
+	.tXP		= 2,
+	.tRTP		= 2,
+	.tCKE		= 3,
+	.tCKESR		= 3,
+	.tFAW		= 8
+};
+
+static const struct lpddr2_ac_timings *ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings dev_4G_S4_timings = {
+	.ac_timings	= ac_timings,
+	.min_tck	= &min_tck,
+};
+
+/*
+ * List of status registers to be controlled back to control registers
+ * after initial leveling
+ * readreg, writereg
+ */
+const struct read_write_regs omap5_bug_00339_regs[] = {
+	{ 8,  5 },
+	{ 9,  6 },
+	{ 10, 7 },
+	{ 14, 8 },
+	{ 15, 9 },
+	{ 16, 10 },
+	{ 11, 2 },
+	{ 12, 3 },
+	{ 13, 4 },
+	{ 17, 11 },
+	{ 18, 12 },
+	{ 19, 13 },
+};
+
+const struct read_write_regs dra_bug_00339_regs[] = {
+	{ 7,  7 },
+	{ 8,  8 },
+	{ 9,  9 },
+	{ 10, 10 },
+	{ 11, 11 },
+	{ 12, 2 },
+	{ 13, 3 },
+	{ 14, 4 },
+	{ 15, 5 },
+	{ 16, 6 },
+	{ 17, 12 },
+	{ 18, 13 },
+	{ 19, 14 },
+	{ 20, 15 },
+	{ 21, 16 },
+	{ 22, 17 },
+	{ 23, 18 },
+	{ 24, 19 },
+	{ 25, 20 },
+	{ 26, 21}
+};
+
+const struct read_write_regs *get_bug_regs(u32 *iterations)
+{
+	const struct read_write_regs *bug_00339_regs_ptr = NULL;
+
+	switch (omap_revision()) {
+	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
+	case OMAP5432_ES1_0:
+	case OMAP5432_ES2_0:
+		bug_00339_regs_ptr = omap5_bug_00339_regs;
+		*iterations = sizeof(omap5_bug_00339_regs)/
+			     sizeof(omap5_bug_00339_regs[0]);
+		break;
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
+	case DRA762_ES1_0:
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+	case DRA752_ES2_0:
+	case DRA722_ES1_0:
+	case DRA722_ES2_0:
+	case DRA722_ES2_1:
+		bug_00339_regs_ptr = dra_bug_00339_regs;
+		*iterations = sizeof(dra_bug_00339_regs)/
+			     sizeof(dra_bug_00339_regs[0]);
+		break;
+	default:
+		printf("\n Error: UnKnown SOC");
+	}
+
+	return bug_00339_regs_ptr;
+}
+
+void emif_get_device_timings_sdp(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &dev_4G_S4_timings;
+	*cs1_device_timings = &dev_4G_S4_timings;
+}
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+	__attribute__((weak, alias("emif_get_device_timings_sdp")));
+
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/roms/u-boot/arch/arm/mach-omap2/omap5/sec_entry_cpu1.S b/roms/u-boot/arch/arm/mach-omap2/omap5/sec_entry_cpu1.S
new file mode 100644
index 000000000..32de9d3d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/omap5/sec_entry_cpu1.S
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Secure entry function for CPU Core #1
+ *
+ * (C) Copyright 2016
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Harinarayan Bhatta <harinarayan@ti.com>
+ */
+
+#include <config.h>
+#include <asm/arch/omap.h>
+#include <asm/omap_common.h>
+#include <linux/linkage.h>
+
+.arch_extension sec
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+.global flush_dcache_range
+#endif
+
+#define AUX_CORE_BOOT_0		0x48281800
+#define AUX_CORE_BOOT_1		0x48281804
+
+#ifdef CONFIG_DRA7XX
+/* DRA7xx ROM code function "startup_BootSlave". This function is where CPU1
+ * waits on WFE, polling on AUX_CORE_BOOT_x registers.
+ * This address is same for J6 and J6 Eco.
+ */
+#define ROM_FXN_STARTUP_BOOTSLAVE     0x00038a64
+#endif
+
+/* Assembly core where CPU1 is woken up into
+ * No need to save-restore registers, does not use stack.
+ */
+LENTRY(cpu1_entry)
+	ldr	r4, =omap_smc_sec_cpu1_args
+	ldm	r4, {r0,r1,r2,r3}	@ Retrieve args
+
+	mov	r6, #0xFF	@ Indicate new Task call
+	mov	r12, #0x00	@ Secure Service ID in R12
+
+	dsb
+	dmb
+	smc	0		@ SMC #0 to enter monitor mode
+
+	b	.Lend		@ exit at end of the service execution
+	nop
+
+	@ In case of IRQ happening in Secure, then ARM will branch here.
+	@ At that moment, IRQ will be pending and ARM will jump to Non Secure
+	@ IRQ handler
+	mov	r12, #0xFE
+
+	dsb
+	dmb
+	smc	0		@ SMC #0 to enter monitor mode
+
+.Lend:
+	ldr	r4, =omap_smc_sec_cpu1_args
+	str	r0, [r4, #0x10]		@ save return value
+	ldr	r4, =AUX_CORE_BOOT_0
+	mov	r5, #0x0
+	str	r5, [r4]
+	ldr	r4, =ROM_FXN_STARTUP_BOOTSLAVE
+	sev				@ Tell CPU0 we are done
+	bx	r4			@ Jump back to ROM
+END(cpu1_entry)
+
+/*
+ * u32 omap_smc_sec_cpu1(u32 service, u32 proc_id, u32 flag, u32 *params);
+ *
+ * Makes a secure ROM/PPA call on CPU Core #1 on supported platforms.
+ * Assumes that CPU #1 is waiting in ROM code and not yet woken up or used by
+ * u-boot.
+ */
+ENTRY(omap_smc_sec_cpu1)
+	push	{r4, r5, lr}
+	ldr	r4, =omap_smc_sec_cpu1_args
+	stm	r4, {r0,r1,r2,r3}	@ Save args to memory
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	mov	r0, r4
+	mov	r1, #CONFIG_SYS_CACHELINE_SIZE
+	add	r1, r0, r1		@ dcache is not enabled on CPU1, so
+	blx	flush_dcache_range	@ flush the cache on args buffer
+#endif
+	ldr	r4, =AUX_CORE_BOOT_1
+	ldr	r5, =cpu1_entry
+	str	r5, [r4]		@ Setup CPU1 entry function
+	ldr	r4, =AUX_CORE_BOOT_0
+	mov	r5, #0x10
+	str	r5, [r4]		@ Tell ROM to exit while loop
+	sev				@ Wake up CPU1
+.Lwait:
+	wfe				@ Wait for CPU1 to finish
+	nop
+	ldr	r5, [r4]		@ Check if CPU1 is done
+	cmp	r5, #0
+	bne	.Lwait
+
+	ldr	r4, =omap_smc_sec_cpu1_args
+	ldr	r0, [r4, #0x10]         @ Retrieve return value
+	pop	{r4, r5, pc}
+ENDPROC(omap_smc_sec_cpu1)
+
+/*
+ * Buffer to save function arguments and return value for omap_smc_sec_cpu1
+ */
+.section .data
+omap_smc_sec_cpu1_args:
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	.balign CONFIG_SYS_CACHELINE_SIZE
+	.rept  CONFIG_SYS_CACHELINE_SIZE/4
+	.word 0
+	.endr
+#else
+	.rept 5
+	.word 0
+	.endr
+#endif
+END(omap_smc_sec_cpu1_args)
diff --git a/roms/u-boot/arch/arm/mach-omap2/pipe3-phy.c b/roms/u-boot/arch/arm/mach-omap2/pipe3-phy.c
new file mode 100644
index 000000000..35ec81d31
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/pipe3-phy.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ */
+
+#include <common.h>
+#include <sata.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include "pipe3-phy.h"
+
+/* PLLCTRL Registers */
+#define PLL_STATUS              0x00000004
+#define PLL_GO                  0x00000008
+#define PLL_CONFIGURATION1      0x0000000C
+#define PLL_CONFIGURATION2      0x00000010
+#define PLL_CONFIGURATION3      0x00000014
+#define PLL_CONFIGURATION4      0x00000020
+
+#define PLL_REGM_MASK           0x001FFE00
+#define PLL_REGM_SHIFT          9
+#define PLL_REGM_F_MASK         0x0003FFFF
+#define PLL_REGM_F_SHIFT        0
+#define PLL_REGN_MASK           0x000001FE
+#define PLL_REGN_SHIFT          1
+#define PLL_SELFREQDCO_MASK     0x0000000E
+#define PLL_SELFREQDCO_SHIFT    1
+#define PLL_SD_MASK             0x0003FC00
+#define PLL_SD_SHIFT            10
+#define SET_PLL_GO              0x1
+#define PLL_TICOPWDN            BIT(16)
+#define PLL_LDOPWDN             BIT(15)
+#define PLL_LOCK                0x2
+#define PLL_IDLE                0x1
+
+/* PHY POWER CONTROL Register */
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK         0x003FC000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT        0xE
+
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK        0xFFC00000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT       0x16
+
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON       0x3
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF      0x0
+
+
+#define PLL_IDLE_TIME   100     /* in milliseconds */
+#define PLL_LOCK_TIME   100     /* in milliseconds */
+
+static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
+{
+	return __raw_readl(addr + offset);
+}
+
+static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset,
+		u32 data)
+{
+	__raw_writel(data, addr + offset);
+}
+
+static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3
+									*pipe3)
+{
+	u32 rate;
+	struct pipe3_dpll_map *dpll_map = pipe3->dpll_map;
+
+	rate = get_sys_clk_freq();
+
+	for (; dpll_map->rate; dpll_map++) {
+		if (rate == dpll_map->rate)
+			return &dpll_map->params;
+	}
+
+	printf("%s: No DPLL configuration for %u Hz SYS CLK\n",
+	       __func__, rate);
+	return NULL;
+}
+
+
+static int omap_pipe3_wait_lock(struct omap_pipe3 *phy)
+{
+	u32 val;
+	int timeout = PLL_LOCK_TIME;
+
+	do {
+		mdelay(1);
+		val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+		if (val & PLL_LOCK)
+			break;
+	} while (--timeout);
+
+	if (!(val & PLL_LOCK)) {
+		printf("%s: DPLL failed to lock\n", __func__);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int omap_pipe3_dpll_program(struct omap_pipe3 *phy)
+{
+	u32                     val;
+	struct pipe3_dpll_params *dpll_params;
+
+	dpll_params = omap_pipe3_get_dpll_params(phy);
+	if (!dpll_params) {
+		printf("%s: Invalid DPLL parameters\n", __func__);
+		return -EINVAL;
+	}
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+	val &= ~PLL_REGN_MASK;
+	val |= dpll_params->n << PLL_REGN_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+	val &= ~PLL_SELFREQDCO_MASK;
+	val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+	val &= ~PLL_REGM_MASK;
+	val |= dpll_params->m << PLL_REGM_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
+	val &= ~PLL_REGM_F_MASK;
+	val |= dpll_params->mf << PLL_REGM_F_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
+	val &= ~PLL_SD_MASK;
+	val |= dpll_params->sd << PLL_SD_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
+
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
+
+	return omap_pipe3_wait_lock(phy);
+}
+
+static void omap_control_phy_power(struct omap_pipe3 *phy, int on)
+{
+	u32 val, rate;
+
+	val = readl(phy->power_reg);
+
+	rate = get_sys_clk_freq();
+	rate = rate/1000000;
+
+	if (on) {
+		val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+		val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+			OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+		val |= rate <<
+			OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+	} else {
+		val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+		val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+			OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+	}
+
+	writel(val, phy->power_reg);
+}
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy)
+{
+	int ret;
+	u32 val;
+
+	/* Program the DPLL only if not locked */
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+	if (!(val & PLL_LOCK)) {
+		ret = omap_pipe3_dpll_program(phy);
+		if (ret)
+			return ret;
+	} else {
+		/* else just bring it out of IDLE mode */
+		val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+		if (val & PLL_IDLE) {
+			val &= ~PLL_IDLE;
+			omap_pipe3_writel(phy->pll_ctrl_base,
+					  PLL_CONFIGURATION2, val);
+			ret = omap_pipe3_wait_lock(phy);
+			if (ret)
+				return ret;
+		}
+	}
+
+	/* Power up the PHY */
+	omap_control_phy_power(phy, 1);
+
+	return 0;
+}
+
+int phy_pipe3_power_off(struct omap_pipe3 *phy)
+{
+	u32 val;
+	int timeout = PLL_IDLE_TIME;
+
+	/* Power down the PHY */
+	omap_control_phy_power(phy, 0);
+
+	/* Put DPLL in IDLE mode */
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+	val |= PLL_IDLE;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+	/* wait for LDO and Oscillator to power down */
+	do {
+		mdelay(1);
+		val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+		if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+			break;
+	} while (--timeout);
+
+	if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+		printf("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
+		       __func__, val);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
diff --git a/roms/u-boot/arch/arm/mach-omap2/pipe3-phy.h b/roms/u-boot/arch/arm/mach-omap2/pipe3-phy.h
new file mode 100644
index 000000000..182bdcd4c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/pipe3-phy.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ */
+
+#ifndef __OMAP_PIPE3_PHY_H
+#define __OMAP_PIPE3_PHY_H
+
+struct pipe3_dpll_params {
+	u16     m;
+	u8      n;
+	u8      freq:3;
+	u8      sd;
+	u32     mf;
+};
+
+struct pipe3_dpll_map {
+	unsigned long rate;
+	struct pipe3_dpll_params params;
+};
+
+struct omap_pipe3 {
+	void __iomem            *pll_ctrl_base;
+	void __iomem		*power_reg;
+	struct pipe3_dpll_map   *dpll_map;
+};
+
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy);
+int phy_pipe3_power_off(struct omap_pipe3 *pipe3);
+
+#endif /* __OMAP_PIPE3_PHY_H */
diff --git a/roms/u-boot/arch/arm/mach-omap2/reset.c b/roms/u-boot/arch/arm/mach-omap2/reset.c
new file mode 100644
index 000000000..1fd79c2e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/reset.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Common layer for reset related functionality of OMAP based socs.
+ *
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ */
+#include <config.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <linux/compiler.h>
+
+void __weak reset_cpu(void)
+{
+	writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL);
+}
+
+u32 __weak warm_reset(void)
+{
+	return (readl(PRM_RSTST) & PRM_RSTST_WARM_RESET_MASK);
+}
+
+void __weak setup_warmreset_time(void)
+{
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/sata.c b/roms/u-boot/arch/arm/mach-omap2/sata.c
new file mode 100644
index 000000000..4672dc534
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/sata.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI SATA platform driver
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sata.h>
+#include <sata.h>
+#include <asm/io.h>
+#include "pipe3-phy.h"
+
+static struct pipe3_dpll_map dpll_map_sata[] = {
+	{12000000, {1000, 7, 4, 6, 0} },        /* 12 MHz */
+	{16800000, {714, 7, 4, 6, 0} },         /* 16.8 MHz */
+	{19200000, {625, 7, 4, 6, 0} },         /* 19.2 MHz */
+	{20000000, {600, 7, 4, 6, 0} },         /* 20 MHz */
+	{26000000, {461, 7, 4, 6, 0} },         /* 26 MHz */
+	{38400000, {312, 7, 4, 6, 0} },         /* 38.4 MHz */
+	{ },                                    /* Terminator */
+};
+
+struct omap_pipe3 sata_phy = {
+	.pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE,
+	/* .power_reg is updated at runtime */
+	.dpll_map = dpll_map_sata,
+};
+
+int init_sata(int dev)
+{
+	int ret;
+	u32 val;
+
+	sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
+
+	/* Power up the PHY */
+	phy_pipe3_power_on(&sata_phy);
+
+	/* Enable SATA module, No Idle, No Standby */
+	val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
+	writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG);
+
+	ret = ahci_init((void __iomem *)DWC_AHSATA_BASE);
+
+	return ret;
+}
+
+int reset_sata(int dev)
+{
+	return 0;
+}
+
+/* On OMAP platforms SATA provides the SCSI subsystem */
+void scsi_init(void)
+{
+	init_sata(0);
+	scsi_scan(1);
+}
+
+int scsi_bus_reset(struct udevice *dev)
+{
+	ahci_reset((void __iomem *)DWC_AHSATA_BASE);
+	ahci_init((void __iomem *)DWC_AHSATA_BASE);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/sec-common.c b/roms/u-boot/arch/arm/mach-omap2/sec-common.c
new file mode 100644
index 000000000..0551bc125
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/sec-common.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Common security related functions for OMAP devices
+ *
+ * (C) Copyright 2016-2017
+ * Texas Instruments, <www.ti.com>
+ *
+ * Daniel Allred <d-allred@ti.com>
+ * Andreas Dannenberg <dannenberg@ti.com>
+ * Harinarayan Bhatta <harinarayan@ti.com>
+ * Andrew F. Davis <afd@ti.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <stdarg.h>
+
+#include <asm/arch/sys_proto.h>
+#include <asm/cache.h>
+#include <asm/omap_common.h>
+#include <asm/omap_sec_common.h>
+#include <asm/spl.h>
+#include <asm/ti-common/sys_proto.h>
+#include <mapmem.h>
+#include <spl.h>
+#include <tee/optee.h>
+
+/* Index for signature verify ROM API */
+#ifdef CONFIG_AM33XX
+#define API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX	(0x0000000C)
+#else
+#define API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX	(0x0000000E)
+#endif
+
+/* Index for signature PPA-based TI HAL APIs */
+#define PPA_HAL_SERVICES_START_INDEX        (0x200)
+#define PPA_SERV_HAL_TEE_LOAD_MASTER        (PPA_HAL_SERVICES_START_INDEX + 23)
+#define PPA_SERV_HAL_TEE_LOAD_SLAVE         (PPA_HAL_SERVICES_START_INDEX + 24)
+#define PPA_SERV_HAL_SETUP_SEC_RESVD_REGION (PPA_HAL_SERVICES_START_INDEX + 25)
+#define PPA_SERV_HAL_SETUP_EMIF_FW_REGION   (PPA_HAL_SERVICES_START_INDEX + 26)
+#define PPA_SERV_HAL_LOCK_EMIF_FW           (PPA_HAL_SERVICES_START_INDEX + 27)
+
+/* Offset of header size if image is signed as ISW */
+#define HEADER_SIZE_OFFSET	(0x6D)
+
+int tee_loaded = 0;
+
+/* Argument for PPA_SERV_HAL_TEE_LOAD_MASTER */
+struct ppa_tee_load_info {
+	u32 tee_sec_mem_start; /* Physical start address reserved for TEE */
+	u32 tee_sec_mem_size;  /* Size of the memory reserved for TEE */
+	u32 tee_cert_start;    /* Address where signed TEE binary is loaded */
+	u32 tee_cert_size;     /* Size of TEE certificate (signed binary) */
+	u32 tee_jump_addr;     /* Address to jump to start TEE execution */
+	u32 tee_arg0;          /* argument to TEE jump function, in r0 */
+};
+
+static uint32_t secure_rom_call_args[5] __aligned(ARCH_DMA_MINALIGN) __section(".data");
+
+u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...)
+{
+	int i;
+	u32 num_args;
+	va_list ap;
+
+	va_start(ap, flag);
+
+	num_args = va_arg(ap, u32);
+
+	if (num_args > 4) {
+		va_end(ap);
+		return 1;
+	}
+
+	/* Copy args to aligned args structure */
+	for (i = 0; i < num_args; i++)
+		secure_rom_call_args[i + 1] = va_arg(ap, u32);
+
+	secure_rom_call_args[0] = num_args;
+
+	va_end(ap);
+
+	/* if data cache is enabled, flush the aligned args structure */
+	flush_dcache_range(
+		(unsigned int)&secure_rom_call_args[0],
+		(unsigned int)&secure_rom_call_args[0] +
+		roundup(sizeof(secure_rom_call_args), ARCH_DMA_MINALIGN));
+
+	return omap_smc_sec(service, proc_id, flag, secure_rom_call_args);
+}
+
+static u32 find_sig_start(char *image, size_t size)
+{
+	char *image_end = image + size;
+	char *sig_start_magic = "CERT_";
+	int magic_str_len = strlen(sig_start_magic);
+	char *ch;
+
+	while (--image_end > image) {
+		if (*image_end == '_') {
+			ch = image_end - magic_str_len + 1;
+			if (!strncmp(ch, sig_start_magic, magic_str_len))
+				return (u32)ch;
+		}
+	}
+	return 0;
+}
+
+int secure_boot_verify_image(void **image, size_t *size)
+{
+	int result = 1;
+	u32 cert_addr, sig_addr;
+	size_t cert_size;
+
+	/* Perform cache writeback on input buffer */
+	flush_dcache_range(
+		rounddown((u32)*image, ARCH_DMA_MINALIGN),
+		roundup((u32)*image + *size, ARCH_DMA_MINALIGN));
+
+	cert_addr = (uint32_t)*image;
+	sig_addr = find_sig_start((char *)*image, *size);
+
+	if (sig_addr == 0) {
+		printf("No signature found in image!\n");
+		result = 1;
+		goto auth_exit;
+	}
+
+	*size = sig_addr - cert_addr;	/* Subtract out the signature size */
+	/* Subtract header if present */
+	if (strncmp((char *)sig_addr, "CERT_ISW_", 9) == 0)
+		*size -= ((u32 *)*image)[HEADER_SIZE_OFFSET];
+	cert_size = *size;
+
+	/* Check if image load address is 32-bit aligned */
+	if (!IS_ALIGNED(cert_addr, 4)) {
+		printf("Image is not 4-byte aligned!\n");
+		result = 1;
+		goto auth_exit;
+	}
+
+	/* Image size also should be multiple of 4 */
+	if (!IS_ALIGNED(cert_size, 4)) {
+		printf("Image size is not 4-byte aligned!\n");
+		result = 1;
+		goto auth_exit;
+	}
+
+	/* Call ROM HAL API to verify certificate signature */
+	debug("%s: load_addr = %x, size = %x, sig_addr = %x\n", __func__,
+	      cert_addr, cert_size, sig_addr);
+
+	result = secure_rom_call(
+		API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX, 0, 0,
+		4, cert_addr, cert_size, sig_addr, 0xFFFFFFFF);
+
+	/* Perform cache writeback on output buffer */
+	flush_dcache_range(
+		rounddown((u32)*image, ARCH_DMA_MINALIGN),
+		roundup((u32)*image + *size, ARCH_DMA_MINALIGN));
+
+auth_exit:
+	if (result != 0) {
+		printf("Authentication failed!\n");
+		printf("Return Value = %08X\n", result);
+		hang();
+	}
+
+	/*
+	 * Output notification of successful authentication to re-assure the
+	 * user that the secure code is being processed as expected. However
+	 * suppress any such log output in case of building for SPL and booting
+	 * via YMODEM. This is done to avoid disturbing the YMODEM serial
+	 * protocol transactions.
+	 */
+	if (!(IS_ENABLED(CONFIG_SPL_BUILD) &&
+	      IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) &&
+	      spl_boot_device() == BOOT_DEVICE_UART))
+		printf("Authentication passed\n");
+
+	return result;
+}
+
+u32 get_sec_mem_start(void)
+{
+	u32 sec_mem_start = CONFIG_TI_SECURE_EMIF_REGION_START;
+	u32 sec_mem_size = CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE;
+	/*
+	 * Total reserved region is all contiguous with protected
+	 * region coming first, followed by the non-secure region.
+	 * If 0x0 start address is given, we simply put the reserved
+	 * region at the end of the external DRAM.
+	 */
+	if (sec_mem_start == 0)
+		sec_mem_start =
+			(CONFIG_SYS_SDRAM_BASE + (
+#if defined(CONFIG_OMAP54XX)
+			omap_sdram_size()
+#else
+			get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				     CONFIG_MAX_RAM_BANK_SIZE)
+#endif
+			- sec_mem_size));
+	return sec_mem_start;
+}
+
+int secure_emif_firewall_setup(uint8_t region_num, uint32_t start_addr,
+			       uint32_t size, uint32_t access_perm,
+			       uint32_t initiator_perm)
+{
+	int result = 1;
+
+	/*
+	 * Call PPA HAL API to do any other general firewall
+	 * configuration for regions 1-6 of the EMIF firewall.
+	 */
+	debug("%s: regionNum = %x, startAddr = %x, size = %x", __func__,
+	      region_num, start_addr, size);
+
+	result = secure_rom_call(
+			PPA_SERV_HAL_SETUP_EMIF_FW_REGION, 0, 0, 4,
+			(start_addr & 0xFFFFFFF0) | (region_num & 0x0F),
+			size, access_perm, initiator_perm);
+
+	if (result != 0) {
+		puts("Secure EMIF Firewall Setup failed!\n");
+		debug("Return Value = %x\n", result);
+	}
+
+	return result;
+}
+
+#if	(CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE <  \
+	CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE)
+#error	"TI Secure EMIF: Protected size cannot be larger than total size."
+#endif
+int secure_emif_reserve(void)
+{
+	int result = 1;
+	u32 sec_mem_start = get_sec_mem_start();
+	u32 sec_prot_size = CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE;
+
+	/* If there is no protected region, there is no reservation to make */
+	if (sec_prot_size == 0)
+		return 0;
+
+	/*
+	 * Call PPA HAL API to reserve a chunk of EMIF SDRAM
+	 * for secure world use. This region should be carved out
+	 * from use by any public code. EMIF firewall region 7
+	 * will be used to protect this block of memory.
+	 */
+	result = secure_rom_call(
+			PPA_SERV_HAL_SETUP_SEC_RESVD_REGION,
+			0, 0, 2, sec_mem_start, sec_prot_size);
+
+	if (result != 0) {
+		puts("SDRAM Firewall: Secure memory reservation failed!\n");
+		debug("Return Value = %x\n", result);
+	}
+
+	return result;
+}
+
+int secure_emif_firewall_lock(void)
+{
+	int result = 1;
+
+	/*
+	 * Call PPA HAL API to lock the EMIF firewall configurations.
+	 * After this API is called, none of the PPA HAL APIs for
+	 * configuring the EMIF firewalls will be usable again (that
+	 * is, calls to those APIs will return failure and have no
+	 * effect).
+	 */
+
+	result = secure_rom_call(
+			PPA_SERV_HAL_LOCK_EMIF_FW,
+			0, 0, 0);
+
+	if (result != 0) {
+		puts("Secure EMIF Firewall Lock failed!\n");
+		debug("Return Value = %x\n", result);
+	}
+
+	return result;
+}
+
+static struct ppa_tee_load_info tee_info __aligned(ARCH_DMA_MINALIGN);
+
+int secure_tee_install(u32 addr)
+{
+	struct optee_header *hdr;
+	void *loadptr;
+	u32 tee_file_size;
+	u32 sec_mem_start = get_sec_mem_start();
+	const u32 size = CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE;
+	u32 ret;
+
+	/* If there is no protected region, there is no place to put the TEE */
+	if (size == 0) {
+		printf("Error loading TEE, no protected memory region available\n");
+		return -ENOBUFS;
+	}
+
+	hdr = (struct optee_header *)map_sysmem(addr, sizeof(struct optee_header));
+	/* 280 bytes = size of signature */
+	tee_file_size = hdr->init_size + hdr->paged_size +
+			sizeof(struct optee_header) + 280;
+
+	if ((hdr->magic != OPTEE_MAGIC) ||
+	    (hdr->version != OPTEE_VERSION) ||
+	    (tee_file_size > size)) {
+		printf("Error in TEE header. Check firewall and TEE sizes\n");
+		unmap_sysmem(hdr);
+		return CMD_RET_FAILURE;
+	}
+
+	tee_info.tee_sec_mem_start = sec_mem_start;
+	tee_info.tee_sec_mem_size = size;
+	tee_info.tee_jump_addr = hdr->init_load_addr_lo;
+	tee_info.tee_cert_start = addr;
+	tee_info.tee_cert_size = tee_file_size;
+	tee_info.tee_arg0 = hdr->init_size + tee_info.tee_jump_addr;
+	unmap_sysmem(hdr);
+	loadptr = map_sysmem(addr, tee_file_size);
+
+	debug("tee_info.tee_sec_mem_start= %08X\n", tee_info.tee_sec_mem_start);
+	debug("tee_info.tee_sec_mem_size = %08X\n", tee_info.tee_sec_mem_size);
+	debug("tee_info.tee_jump_addr = %08X\n", tee_info.tee_jump_addr);
+	debug("tee_info.tee_cert_start = %08X\n", tee_info.tee_cert_start);
+	debug("tee_info.tee_cert_size = %08X\n", tee_info.tee_cert_size);
+	debug("tee_info.tee_arg0 = %08X\n", tee_info.tee_arg0);
+	debug("tee_file_size = %d\n", tee_file_size);
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	flush_dcache_range(
+		rounddown((u32)loadptr, ARCH_DMA_MINALIGN),
+		roundup((u32)loadptr + tee_file_size, ARCH_DMA_MINALIGN));
+
+	flush_dcache_range((u32)&tee_info, (u32)&tee_info +
+			roundup(sizeof(tee_info), ARCH_DMA_MINALIGN));
+#endif
+	unmap_sysmem(loadptr);
+
+	ret = secure_rom_call(PPA_SERV_HAL_TEE_LOAD_MASTER, 0, 0, 1, &tee_info);
+	if (ret) {
+		printf("TEE_LOAD_MASTER Failed\n");
+		return ret;
+	}
+	printf("TEE_LOAD_MASTER Done\n");
+
+#if defined(CONFIG_OMAP54XX)
+	if (!is_dra72x()) {
+		u32 *smc_cpu1_params;
+		/* Reuse the tee_info buffer for SMC params */
+		smc_cpu1_params = (u32 *)&tee_info;
+		smc_cpu1_params[0] = 0;
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+		flush_dcache_range((u32)smc_cpu1_params, (u32)smc_cpu1_params +
+				roundup(sizeof(u32), ARCH_DMA_MINALIGN));
+#endif
+		ret = omap_smc_sec_cpu1(PPA_SERV_HAL_TEE_LOAD_SLAVE, 0, 0,
+				smc_cpu1_params);
+		if (ret) {
+			printf("TEE_LOAD_SLAVE Failed\n");
+			return ret;
+		}
+		printf("TEE_LOAD_SLAVE Done\n");
+	}
+#endif
+
+	tee_loaded = 1;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/sysinfo-common.c b/roms/u-boot/arch/arm/mach-omap2/sysinfo-common.c
new file mode 100644
index 000000000..49bc3a634
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/sysinfo-common.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * System information routines for all OMAP based boards.
+ *
+ * (C) Copyright 2017 Linaro Ltd.
+ * Sam Protsenko <semen.protsenko@linaro.org>
+ */
+
+#include <asm/arch/omap.h>
+#include <asm/io.h>
+#include <asm/omap_common.h>
+
+/**
+ * Tell if device is GP/HS/EMU/TST.
+ */
+u32 get_device_type(void)
+{
+#if defined(CONFIG_OMAP34XX)
+	/*
+	 * On OMAP3 systems we call this early enough that we must just
+	 * use the direct offset for safety.
+	 */
+	return (readl(OMAP34XX_CTRL_BASE + 0x2f0) & DEVICE_TYPE_MASK) >>
+		DEVICE_TYPE_SHIFT;
+#else
+	return (readl((*ctrl)->control_status) & DEVICE_TYPE_MASK) >>
+		DEVICE_TYPE_SHIFT;
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/timer.c b/roms/u-boot/arch/arm/mach-omap2/timer.c
new file mode 100644
index 000000000..82b10f6b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/timer.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2008
+ * Texas Instruments
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Moahmmed Khasim <khasim@ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
+static ulong get_timer_masked(void);
+
+/*
+ * Nothing really to do with interrupts, just starts up a counter.
+ */
+
+#define TIMER_CLOCK		(V_SCLK / (2 << CONFIG_SYS_PTV))
+#define TIMER_OVERFLOW_VAL	0xffffffff
+#define TIMER_LOAD_VAL		0
+
+int timer_init(void)
+{
+	/* start the counter ticking up, reload value on overflow */
+	writel(TIMER_LOAD_VAL, &timer_base->tldr);
+	/* enable timer */
+	writel((CONFIG_SYS_PTV << 2) | TCLR_PRE | TCLR_AR | TCLR_ST,
+		&timer_base->tclr);
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+/* delay x useconds */
+void __udelay(unsigned long usec)
+{
+	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
+	unsigned long now, last = readl(&timer_base->tcrr);
+
+	while (tmo > 0) {
+		now = readl(&timer_base->tcrr);
+		if (last > now) /* count up timer overflow */
+			tmo -= TIMER_OVERFLOW_VAL - last + now + 1;
+		else
+			tmo -= now - last;
+		last = now;
+	}
+}
+
+static ulong get_timer_masked(void)
+{
+	/* current tick value */
+	ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
+
+	if (now >= gd->arch.lastinc) {	/* normal mode (non roll) */
+		/* move stamp fordward with absoulte diff ticks */
+		gd->arch.tbl += (now - gd->arch.lastinc);
+	} else {	/* we have rollover of incrementer */
+		gd->arch.tbl += ((TIMER_OVERFLOW_VAL / (TIMER_CLOCK /
+				CONFIG_SYS_HZ)) - gd->arch.lastinc) + now;
+	}
+	gd->arch.lastinc = now;
+	return gd->arch.tbl;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/u-boot-spl.lds b/roms/u-boot/arch/arm/mach-omap2/u-boot-spl.lds
new file mode 100644
index 000000000..88d81f9b9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/u-boot-spl.lds
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ */
+
+MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\
+		LENGTH = IMAGE_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+		__start = .;
+		*(.vectors)
+		arch/arm/cpu/armv7/start.o	(.text*)
+		*(.text*)
+	} >.sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	} >.sram
+
+	. = ALIGN(4);
+	__image_copy_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} >.sdram
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/utils.c b/roms/u-boot/arch/arm/mach-omap2/utils.c
new file mode 100644
index 000000000..6e6791fc6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/utils.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2011 Linaro Limited
+ * Aneesh V <aneesh@ti.com>
+ */
+#include <common.h>
+#include <env.h>
+#include <part.h>
+#include <asm/setup.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+
+static void do_cancel_out(u32 *num, u32 *den, u32 factor)
+{
+	while (1) {
+		if (((*num)/factor*factor == (*num)) &&
+		   ((*den)/factor*factor == (*den))) {
+			(*num) /= factor;
+			(*den) /= factor;
+		} else
+			break;
+	}
+}
+
+#ifdef CONFIG_FASTBOOT_FLASH
+static void omap_set_fastboot_cpu(void)
+{
+	char *cpu;
+	u32 cpu_rev = omap_revision();
+
+	switch (cpu_rev) {
+	case DRA762_ES1_0:
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
+		cpu = "DRA762";
+		break;
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+	case DRA752_ES2_0:
+		cpu = "DRA752";
+		break;
+	case DRA722_ES1_0:
+	case DRA722_ES2_0:
+	case DRA722_ES2_1:
+		cpu = "DRA722";
+		break;
+	default:
+		cpu = NULL;
+		printf("Warning: fastboot.cpu: unknown CPU rev: %u\n", cpu_rev);
+	}
+
+	env_set("fastboot.cpu", cpu);
+}
+
+static void omap_set_fastboot_secure(void)
+{
+	const char *secure;
+	u32 dev = get_device_type();
+
+	switch (dev) {
+	case EMU_DEVICE:
+		secure = "EMU";
+		break;
+	case HS_DEVICE:
+		secure = "HS";
+		break;
+	case GP_DEVICE:
+		secure = "GP";
+		break;
+	default:
+		secure = NULL;
+		printf("Warning: fastboot.secure: unknown CPU sec: %u\n", dev);
+	}
+
+	env_set("fastboot.secure", secure);
+}
+
+static void omap_set_fastboot_board_rev(void)
+{
+	const char *board_rev;
+
+	board_rev = env_get("board_rev");
+	if (board_rev == NULL)
+		printf("Warning: fastboot.board_rev: unknown board revision\n");
+
+	env_set("fastboot.board_rev", board_rev);
+}
+
+#ifdef CONFIG_FASTBOOT_FLASH_MMC
+static u32 omap_mmc_get_part_size(const char *part)
+{
+	int res;
+	struct blk_desc *dev_desc;
+	struct disk_partition info;
+	u64 sz = 0;
+
+	dev_desc = blk_get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
+	if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
+		pr_err("invalid mmc device\n");
+		return 0;
+	}
+
+	/* Check only for EFI (GPT) partition table */
+	res = part_get_info_by_name_type(dev_desc, part, &info, PART_TYPE_EFI);
+	if (res < 0)
+		return 0;
+
+	/* Calculate size in bytes */
+	sz = (info.size * (u64)info.blksz);
+	/* to KiB */
+	sz >>= 10;
+
+	return (u32)sz;
+}
+
+static void omap_set_fastboot_userdata_size(void)
+{
+	char buf[16];
+	u32 sz_kb;
+
+	sz_kb = omap_mmc_get_part_size("userdata");
+	if (sz_kb == 0)
+		return; /* probably it's not Android partition table */
+
+	sprintf(buf, "%u", sz_kb);
+	env_set("fastboot.userdata_size", buf);
+}
+#else
+static inline void omap_set_fastboot_userdata_size(void)
+{
+}
+#endif /* CONFIG_FASTBOOT_FLASH_MMC */
+
+static void omap_set_fastboot_product(void)
+{
+	const char *board_name;
+
+	board_name = env_get("board_name");
+	if (board_name == NULL)
+		printf("Warning: fastboot.product: unknown board\n");
+
+	env_set("fastboot.product", board_name);
+}
+
+void omap_set_fastboot_vars(void)
+{
+	omap_set_fastboot_cpu();
+	omap_set_fastboot_secure();
+	omap_set_fastboot_board_rev();
+	omap_set_fastboot_userdata_size();
+	omap_set_fastboot_product();
+}
+#endif /* CONFIG_FASTBOOT_FLASH */
+
+/*
+ * Cancel out the denominator and numerator of a fraction
+ * to get smaller numerator and denominator.
+ */
+void cancel_out(u32 *num, u32 *den, u32 den_limit)
+{
+	do_cancel_out(num, den, 2);
+	do_cancel_out(num, den, 3);
+	do_cancel_out(num, den, 5);
+	do_cancel_out(num, den, 7);
+	do_cancel_out(num, den, 11);
+	do_cancel_out(num, den, 13);
+	do_cancel_out(num, den, 17);
+	while ((*den) > den_limit) {
+		*num /= 2;
+		/*
+		 * Round up the denominator so that the final fraction
+		 * (num/den) is always <= the desired value
+		 */
+		*den = (*den + 1) / 2;
+	}
+}
+
+__weak void omap_die_id(unsigned int *die_id)
+{
+	die_id[0] = die_id[1] = die_id[2] = die_id[3] = 0;
+}
+
+void omap_die_id_serial(void)
+{
+	unsigned int die_id[4] = { 0 };
+	char serial_string[17] = { 0 };
+
+	omap_die_id((unsigned int *)&die_id);
+
+	if (!env_get("serial#")) {
+		snprintf(serial_string, sizeof(serial_string),
+			"%08x%08x", die_id[0], die_id[3]);
+
+		env_set("serial#", serial_string);
+	}
+}
+
+void omap_die_id_get_board_serial(struct tag_serialnr *serialnr)
+{
+	char *serial_string;
+	unsigned long long serial;
+
+	serial_string = env_get("serial#");
+
+	if (serial_string) {
+		serial = simple_strtoull(serial_string, NULL, 16);
+
+		serialnr->high = (unsigned int) (serial >> 32);
+		serialnr->low = (unsigned int) (serial & 0xffffffff);
+	} else {
+		serialnr->high = 0;
+		serialnr->low = 0;
+	}
+}
+
+void omap_die_id_usbethaddr(void)
+{
+	unsigned int die_id[4] = { 0 };
+	unsigned char mac[6] = { 0 };
+
+	omap_die_id((unsigned int *)&die_id);
+
+	if (!env_get("usbethaddr")) {
+		/*
+		 * Create a fake MAC address from the processor ID code.
+		 * First byte is 0x02 to signify locally administered.
+		 */
+		mac[0] = 0x02;
+		mac[1] = die_id[3] & 0xff;
+		mac[2] = die_id[2] & 0xff;
+		mac[3] = die_id[1] & 0xff;
+		mac[4] = die_id[0] & 0xff;
+		mac[5] = (die_id[0] >> 8) & 0xff;
+
+		eth_env_set_enetaddr("usbethaddr", mac);
+
+		if (!env_get("ethaddr"))
+			eth_env_set_enetaddr("ethaddr", mac);
+	}
+}
+
+void omap_die_id_display(void)
+{
+	unsigned int die_id[4] = { 0 };
+
+	omap_die_id(die_id);
+
+	printf("OMAP die ID: %08x%08x%08x%08x\n", die_id[3], die_id[2],
+		die_id[1], die_id[0]);
+}
diff --git a/roms/u-boot/arch/arm/mach-omap2/vc.c b/roms/u-boot/arch/arm/mach-omap2/vc.c
new file mode 100644
index 000000000..b7f79800d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-omap2/vc.c
@@ -0,0 +1,145 @@
+/*
+ * Voltage Controller implementation for OMAP
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
+
+/* Register defines and masks for VC IP Block */
+/* PRM_VC_CFG_I2C_MODE */
+#define PRM_VC_CFG_I2C_MODE_DFILTEREN_BIT	(0x1 << 6)
+#define PRM_VC_CFG_I2C_MODE_SRMODEEN_BIT	(0x1 << 4)
+#define PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT	(0x1 << 3)
+#define PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT	0x0
+#define PRM_VC_CFG_I2C_MODE_HSMCODE_MASK	0x3
+
+/* PRM_VC_CFG_I2C_CLK */
+#define PRM_VC_CFG_I2C_CLK_HSCLL_SHIFT		24
+#define PRM_VC_CFG_I2C_CLK_HSCLL_MASK		0xFF
+#define PRM_VC_CFG_I2C_CLK_HSCLH_SHIFT		16
+#define PRM_VC_CFG_I2C_CLK_HSCLH_MASK		0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT		0
+#define PRM_VC_CFG_I2C_CLK_SCLH_MASK		0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT		8
+#define PRM_VC_CFG_I2C_CLK_SCLL_MASK		(0xFF << 8)
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_VAL_BYPASS_VALID_BIT		(0x1 << 24)
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT	0
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK	0x7F
+#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT		8
+#define PRM_VC_VAL_BYPASS_REGADDR_MASK		0xFF
+#define PRM_VC_VAL_BYPASS_DATA_SHIFT		16
+#define PRM_VC_VAL_BYPASS_DATA_MASK		0xFF
+
+/**
+ * omap_vc_init() - Initialization for Voltage controller
+ * @speed_khz: I2C buspeed in KHz
+ */
+static void omap_vc_init(u16 speed_khz)
+{
+	u32 val;
+	u32 sys_clk_khz, cycles_hi, cycles_low;
+
+	sys_clk_khz = get_sys_clk_freq() / 1000;
+
+	if (speed_khz > 400) {
+		puts("higher speed requested - throttle to 400Khz\n");
+		speed_khz = 400;
+	}
+
+	/*
+	 * Setup the dedicated I2C controller for Voltage Control
+	 * I2C clk - high period 40% low period 60%
+	 */
+	speed_khz /= 10;
+	cycles_hi = sys_clk_khz * 4 / speed_khz;
+	cycles_low = sys_clk_khz * 6 / speed_khz;
+	/* values to be set in register - less by 5 & 7 respectively */
+	cycles_hi -= 5;
+	cycles_low -= 7;
+	val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
+	       (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
+	writel(val, (*prcm)->prm_vc_cfg_i2c_clk);
+
+	/*
+	 * Master code if there are multiple masters on the I2C_SR bus.
+	 */
+	val = 0x0 << PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
+	/* No HS mode for now */
+	val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT;
+	writel(val, (*prcm)->prm_vc_cfg_i2c_mode);
+}
+
+/**
+ * omap_vc_bypass_send_value() - Send a data using VC Bypass command
+ * @sa:		7 bit I2C slave address of the PMIC
+ * @reg_addr:	I2C register address(8 bit) address in PMIC
+ * @reg_data:	what 8 bit data to write
+ */
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data)
+{
+	/*
+	 * Unfortunately we need to loop here instead of a defined time
+	 * use arbitary large value
+	 */
+	u32 timeout = 0xFFFF;
+	u32 reg_val;
+
+	sa &= PRM_VC_VAL_BYPASS_SLAVEADDR_MASK;
+	reg_addr &= PRM_VC_VAL_BYPASS_REGADDR_MASK;
+	reg_data &= PRM_VC_VAL_BYPASS_DATA_MASK;
+
+	/* program VC to send data */
+	reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT |
+	    reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT |
+	    reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT;
+	writel(reg_val, (*prcm)->prm_vc_val_bypass);
+
+	/* Signal VC to send data */
+	writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT,
+				(*prcm)->prm_vc_val_bypass);
+
+	/* Wait on VC to complete transmission */
+	do {
+		reg_val = readl((*prcm)->prm_vc_val_bypass) &
+				PRM_VC_VAL_BYPASS_VALID_BIT;
+		if (!reg_val)
+			break;
+
+		sdelay(100);
+	} while (--timeout);
+
+	/* Optional: cleanup PRM_IRQSTATUS_Ax */
+	/* In case we can do something about it in future.. */
+	if (!timeout)
+		return -1;
+
+	/* All good.. */
+	return 0;
+}
+
+void sri2c_init(void)
+{
+	static int sri2c = 1;
+
+	if (sri2c) {
+		omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+		sri2c = 0;
+	}
+	return;
+}
diff --git a/roms/u-boot/arch/arm/mach-orion5x/Kconfig b/roms/u-boot/arch/arm/mach-orion5x/Kconfig
new file mode 100644
index 000000000..5baa6fb93
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_ORION5X
+
+choice
+	prompt "Marvell Orion board select"
+	optional
+
+config TARGET_EDMINIV2
+	bool "LaCie Ethernet Disk mini V2"
+	select SUPPORT_SPL
+
+endchoice
+
+config SYS_SOC
+	default "orion5x"
+
+source "board/LaCie/edminiv2/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-orion5x/Makefile b/roms/u-boot/arch/arm/mach-orion5x/Makefile
new file mode 100644
index 000000000..606153e40
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/Makefile
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+#
+# Based on original Kirkwood support which is
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+obj-y	= cpu.o
+obj-y	+= dram.o
+obj-y	+= timer.o
+
+ifndef CONFIG_SKIP_LOWLEVEL_INIT
+obj-y	+= lowlevel_init.o
+endif
+
+# some files can only build in ARM or THUMB2, not THUMB1
+
+ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+ifndef CONFIG_HAS_THUMB2
+
+CFLAGS_cpu.o := -marm
+
+endif
+endif
diff --git a/roms/u-boot/arch/arm/mach-orion5x/cpu.c b/roms/u-boot/arch/arm/mach-orion5x/cpu.c
new file mode 100644
index 000000000..ffae9a01e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/cpu.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirkwood support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <u-boot/md5.h>
+#include <asm/arch/cpu.h>
+
+#define BUFLEN	16
+
+void reset_cpu(void)
+{
+	struct orion5x_cpu_registers *cpureg =
+	    (struct orion5x_cpu_registers *)ORION5X_CPU_REG_BASE;
+
+	writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
+		&cpureg->rstoutn_mask);
+	writel(readl(&cpureg->sys_soft_rst) | 1,
+		&cpureg->sys_soft_rst);
+	while (1)
+		;
+}
+
+/*
+ * Compute Window Size field value from size expressed in bytes
+ * Used with the Base register to set the address window size and location.
+ * Must be programmed from LSB to MSB as sequence of ones followed by
+ * sequence of zeros. The number of ones specifies the size of the window in
+ * 64 KiB granularity (e.g., a value of 0x00FF specifies 256 = 16 MiB).
+ * NOTES:
+ * 1) A sizeval equal to 0x0 specifies 4 GiB.
+ * 2) A return value of 0x0 specifies 64 KiB.
+ */
+unsigned int orion5x_winctrl_calcsize(unsigned int sizeval)
+{
+	/*
+	 * Calculate the number of 64 KiB blocks needed minus one (rounding up).
+	 * For sizeval > 0 this is equivalent to:
+	 * sizeval = (u32) ceil((double) sizeval / 65536.0) - 1
+	 */
+	sizeval = (sizeval - 1) >> 16;
+
+	/*
+	 * Propagate 'one' bits to the right by 'oring' them.
+	 * We need only treat bits 15-0.
+	 */
+	sizeval |= sizeval >> 1;  /* 'Or' bit 15 onto bit 14 */
+	sizeval |= sizeval >> 2;  /* 'Or' bits 15-14 onto bits 13-12 */
+	sizeval |= sizeval >> 4;  /* 'Or' bits 15-12 onto bits 11-8 */
+	sizeval |= sizeval >> 8;  /* 'Or' bits 15-8 onto bits 7-0*/
+
+	return sizeval;
+}
+
+/*
+ * orion5x_config_adr_windows - Configure address Windows
+ *
+ * There are 8 address windows supported by Orion5x Soc to addess different
+ * devices. Each window can be configured for size, BAR and remap addr
+ * Below configuration is standard for most of the cases
+ *
+ * If remap function not used, remap_lo must be set as base
+ *
+ * NOTES:
+ *
+ * 1) in order to avoid windows with inconsistent control and base values
+ *    (which could prevent access to BOOTCS and hence execution from FLASH)
+ *    always disable window before writing the base value then reenable it
+ *    by writing the control value.
+ *
+ * 2) in order to avoid losing access to BOOTCS when disabling window 7,
+ *    first configure window 6 for BOOTCS, then configure window 7 for BOOTCS,
+ *    then configure windows 6 for its own target.
+ *
+ * Reference Documentation:
+ * Mbus-L to Mbus Bridge Registers Configuration.
+ * (Sec 25.1 and 25.3 of Datasheet)
+ */
+int orion5x_config_adr_windows(void)
+{
+	struct orion5x_win_registers *winregs =
+		(struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE;
+
+/* Disable window 0, configure it for its intended target, enable it. */
+	writel(0, &winregs[0].ctrl);
+	writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base);
+	writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo);
+	writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM,
+		ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM,
+		ORION5X_WIN_ENABLE), &winregs[0].ctrl);
+/* Disable window 1, configure it for its intended target, enable it. */
+	writel(0, &winregs[1].ctrl);
+	writel(ORION5X_ADR_PCIE_IO, &winregs[1].base);
+	writel(ORION5X_ADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo);
+	writel(ORION5X_ADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO,
+		ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO,
+		ORION5X_WIN_ENABLE), &winregs[1].ctrl);
+/* Disable window 2, configure it for its intended target, enable it. */
+	writel(0, &winregs[2].ctrl);
+	writel(ORION5X_ADR_PCI_MEM, &winregs[2].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_MEM,
+		ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_MEM,
+		ORION5X_WIN_ENABLE), &winregs[2].ctrl);
+/* Disable window 3, configure it for its intended target, enable it. */
+	writel(0, &winregs[3].ctrl);
+	writel(ORION5X_ADR_PCI_IO, &winregs[3].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_IO,
+		ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_IO,
+		ORION5X_WIN_ENABLE), &winregs[3].ctrl);
+/* Disable window 4, configure it for its intended target, enable it. */
+	writel(0, &winregs[4].ctrl);
+	writel(ORION5X_ADR_DEV_CS0, &winregs[4].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS0,
+		ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS0,
+		ORION5X_WIN_ENABLE), &winregs[4].ctrl);
+/* Disable window 5, configure it for its intended target, enable it. */
+	writel(0, &winregs[5].ctrl);
+	writel(ORION5X_ADR_DEV_CS1, &winregs[5].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS1,
+		ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS1,
+		ORION5X_WIN_ENABLE), &winregs[5].ctrl);
+/* Disable window 6, configure it for FLASH, enable it. */
+	writel(0, &winregs[6].ctrl);
+	writel(ORION5X_ADR_BOOTROM, &winregs[6].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
+		ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
+		ORION5X_WIN_ENABLE), &winregs[6].ctrl);
+/* Disable window 7, configure it for FLASH, enable it. */
+	writel(0, &winregs[7].ctrl);
+	writel(ORION5X_ADR_BOOTROM, &winregs[7].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
+		ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
+		ORION5X_WIN_ENABLE), &winregs[7].ctrl);
+/* Disable window 6, configure it for its intended target, enable it. */
+	writel(0, &winregs[6].ctrl);
+	writel(ORION5X_ADR_DEV_CS2, &winregs[6].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2,
+		ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2,
+		ORION5X_WIN_ENABLE), &winregs[6].ctrl);
+
+	return 0;
+}
+
+/*
+ * Orion5x identification is done through PCIE space.
+ */
+
+u32 orion5x_device_id(void)
+{
+	return readl(PCIE_DEV_ID_OFF) >> 16;
+}
+
+u32 orion5x_device_rev(void)
+{
+	return readl(PCIE_DEV_REV_OFF) & 0xff;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+
+/* Display device and revision IDs.
+ * This function must cover all known device/revision
+ * combinations, not only the one for which u-boot is
+ * compiled; this way, one can identify actual HW in
+ * case of a mismatch.
+ */
+int print_cpuinfo(void)
+{
+	char dev_str[7]; /* room enough for 0x0000 plus null byte */
+	char rev_str[5]; /* room enough for 0x00 plus null byte */
+	char *dev_name = NULL;
+	char *rev_name = NULL;
+
+	u32 dev = orion5x_device_id();
+	u32 rev = orion5x_device_rev();
+
+	if (dev == MV88F5181_DEV_ID) {
+		dev_name = "MV88F5181";
+		if (rev == MV88F5181_REV_B1)
+			rev_name = "B1";
+		else if (rev == MV88F5181L_REV_A1) {
+			dev_name = "MV88F5181L";
+			rev_name = "A1";
+		} else if (rev == MV88F5181L_REV_A0) {
+			dev_name = "MV88F5181L";
+			rev_name = "A0";
+		}
+	} else if (dev == MV88F5182_DEV_ID) {
+		dev_name = "MV88F5182";
+		if (rev == MV88F5182_REV_A2)
+			rev_name = "A2";
+	} else if (dev == MV88F5281_DEV_ID) {
+		dev_name = "MV88F5281";
+		if (rev == MV88F5281_REV_D2)
+			rev_name = "D2";
+		else if (rev == MV88F5281_REV_D1)
+			rev_name = "D1";
+		else if (rev == MV88F5281_REV_D0)
+			rev_name = "D0";
+	} else if (dev == MV88F6183_DEV_ID) {
+		dev_name = "MV88F6183";
+		if (rev == MV88F6183_REV_B0)
+			rev_name = "B0";
+	}
+	if (dev_name == NULL) {
+		sprintf(dev_str, "0x%04x", dev);
+		dev_name = dev_str;
+	}
+	if (rev_name == NULL) {
+		sprintf(rev_str, "0x%02x", rev);
+		rev_name = rev_str;
+	}
+
+	printf("SoC:   Orion5x %s-%s\n", dev_name, rev_name);
+
+	return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+	/* Enable and invalidate L2 cache in write through mode */
+	invalidate_l2_cache();
+
+#ifdef CONFIG_SPL_BUILD
+	orion5x_config_adr_windows();
+#endif
+
+	return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
+/*
+ * SOC specific misc init
+ */
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+	u32 temp;
+
+	/*CPU streaming & write allocate */
+	temp = readfr_extra_feature_reg();
+	temp &= ~(1 << 28);	/* disable wr alloc */
+	writefr_extra_feature_reg(temp);
+
+	temp = readfr_extra_feature_reg();
+	temp &= ~(1 << 29);	/* streaming disabled */
+	writefr_extra_feature_reg(temp);
+
+	/* L2Cache settings */
+	temp = readfr_extra_feature_reg();
+	/* Disable L2C pre fetch - Set bit 24 */
+	temp |= (1 << 24);
+	/* enable L2C - Set bit 22 */
+	temp |= (1 << 22);
+	writefr_extra_feature_reg(temp);
+
+	icache_enable();
+	/* Change reset vector to address 0x0 */
+	temp = get_cr();
+	set_cr(temp & ~CR_V);
+
+	/* Set CPIOs and MPPs - values provided by board
+	   include file */
+	writel(ORION5X_MPP0_7, ORION5X_MPP_BASE+0x00);
+	writel(ORION5X_MPP8_15, ORION5X_MPP_BASE+0x04);
+	writel(ORION5X_MPP16_23, ORION5X_MPP_BASE+0x50);
+	writel(ORION5X_GPIO_OUT_VALUE, ORION5X_GPIO_BASE+0x00);
+	writel(ORION5X_GPIO_OUT_ENABLE, ORION5X_GPIO_BASE+0x04);
+	writel(ORION5X_GPIO_IN_POLARITY, ORION5X_GPIO_BASE+0x0c);
+
+	/* initialize timer */
+	timer_init_r();
+	return 0;
+}
+#endif /* CONFIG_ARCH_MISC_INIT */
+
+#ifdef CONFIG_MVGBE
+int cpu_eth_init(struct bd_info *bis)
+{
+	mvgbe_initialize(bis);
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-orion5x/dram.c b/roms/u-boot/arch/arm/mach-orion5x/dram.c
new file mode 100644
index 000000000..c9a3750e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/dram.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirkwood support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <common.h>
+#include <config.h>
+#include <init.h>
+#include <asm/arch/cpu.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * orion5x_sdram_bar - reads SDRAM Base Address Register
+ */
+u32 orion5x_sdram_bar(enum memory_bank bank)
+{
+	struct orion5x_ddr_addr_decode_registers *winregs =
+		(struct orion5x_ddr_addr_decode_registers *)
+		ORION5X_DRAM_BASE;
+
+	u32 result = 0;
+	u32 enable = 0x01 & winregs[bank].size;
+
+	if ((!enable) || (bank > BANK3))
+		return 0;
+
+	result = winregs[bank].base;
+	return result;
+}
+int dram_init (void)
+{
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size(
+			(long *) orion5x_sdram_bar(0),
+			CONFIG_MAX_RAM_BANK_SIZE);
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
+		gd->bd->bi_dram[i].size = get_ram_size(
+			(long *) (gd->bd->bi_dram[i].start),
+			CONFIG_MAX_RAM_BANK_SIZE);
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-orion5x/include/mach/cpu.h b/roms/u-boot/arch/arm/mach-orion5x/include/mach/cpu.h
new file mode 100644
index 000000000..c3ff89669
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/include/mach/cpu.h
@@ -0,0 +1,242 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirorion5x_ood support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef _ORION5X_CPU_H
+#define _ORION5X_CPU_H
+
+#include <asm/system.h>
+
+#ifndef __ASSEMBLY__
+
+#define ORION5X_CPU_WIN_CTRL_DATA(size, target, attr, en) (en | (target << 4) \
+			| (attr << 8) | (orion5x_winctrl_calcsize(size) << 16))
+
+#define ORION5XGBE_PORT_SERIAL_CONTROL1_REG(_x)	\
+		((_x ? ORION5X_EGIGA0_BASE : ORION5X_EGIGA1_BASE) + 0x44c)
+
+enum memory_bank {
+	BANK0,
+	BANK1,
+	BANK2,
+	BANK3
+};
+
+enum orion5x_cpu_winen {
+	ORION5X_WIN_DISABLE,
+	ORION5X_WIN_ENABLE
+};
+
+enum orion5x_cpu_target {
+	ORION5X_TARGET_DRAM = 0,
+	ORION5X_TARGET_DEVICE = 1,
+	ORION5X_TARGET_PCI = 3,
+	ORION5X_TARGET_PCIE = 4,
+	ORION5X_TARGET_SASRAM = 9
+};
+
+enum orion5x_cpu_attrib {
+	ORION5X_ATTR_DRAM_CS0 = 0x0e,
+	ORION5X_ATTR_DRAM_CS1 = 0x0d,
+	ORION5X_ATTR_DRAM_CS2 = 0x0b,
+	ORION5X_ATTR_DRAM_CS3 = 0x07,
+	ORION5X_ATTR_PCI_MEM = 0x59,
+	ORION5X_ATTR_PCI_IO = 0x51,
+	ORION5X_ATTR_PCIE_MEM = 0x59,
+	ORION5X_ATTR_PCIE_IO = 0x51,
+	ORION5X_ATTR_SASRAM = 0x00,
+	ORION5X_ATTR_DEV_CS0 = 0x1e,
+	ORION5X_ATTR_DEV_CS1 = 0x1d,
+	ORION5X_ATTR_DEV_CS2 = 0x1b,
+	ORION5X_ATTR_BOOTROM = 0x0f
+};
+
+/*
+ * Device Address MAP BAR values
+ *
+ * All addresses and sizes not defined by board code
+ * will be given default values here.
+ */
+
+#if !defined (ORION5X_ADR_PCIE_MEM)
+#define ORION5X_ADR_PCIE_MEM	0x90000000
+#endif
+
+#if !defined (ORION5X_ADR_PCIE_MEM_REMAP_LO)
+#define ORION5X_ADR_PCIE_MEM_REMAP_LO	0x90000000
+#endif
+
+#if !defined (ORION5X_ADR_PCIE_MEM_REMAP_HI)
+#define ORION5X_ADR_PCIE_MEM_REMAP_HI	0
+#endif
+
+#if !defined (ORION5X_SZ_PCIE_MEM)
+#define ORION5X_SZ_PCIE_MEM	(128*1024*1024)
+#endif
+
+#if !defined (ORION5X_ADR_PCIE_IO)
+#define ORION5X_ADR_PCIE_IO	0xf0000000
+#endif
+
+#if !defined (ORION5X_ADR_PCIE_IO_REMAP_LO)
+#define ORION5X_ADR_PCIE_IO_REMAP_LO	0xf0000000
+#endif
+
+#if !defined (ORION5X_ADR_PCIE_IO_REMAP_HI)
+#define ORION5X_ADR_PCIE_IO_REMAP_HI	0
+#endif
+
+#if !defined (ORION5X_SZ_PCIE_IO)
+#define ORION5X_SZ_PCIE_IO	(64*1024)
+#endif
+
+#if !defined (ORION5X_ADR_PCI_MEM)
+#define ORION5X_ADR_PCI_MEM	0x98000000
+#endif
+
+#if !defined (ORION5X_SZ_PCI_MEM)
+#define ORION5X_SZ_PCI_MEM	(128*1024*1024)
+#endif
+
+#if !defined (ORION5X_ADR_PCI_IO)
+#define ORION5X_ADR_PCI_IO	0xf0100000
+#endif
+
+#if !defined (ORION5X_SZ_PCI_IO)
+#define ORION5X_SZ_PCI_IO	(64*1024)
+#endif
+
+#if !defined (ORION5X_ADR_DEV_CS0)
+#define ORION5X_ADR_DEV_CS0	0xfa000000
+#endif
+
+#if !defined (ORION5X_SZ_DEV_CS0)
+#define ORION5X_SZ_DEV_CS0	(2*1024*1024)
+#endif
+
+#if !defined (ORION5X_ADR_DEV_CS1)
+#define ORION5X_ADR_DEV_CS1	0xf8000000
+#endif
+
+#if !defined (ORION5X_SZ_DEV_CS1)
+#define ORION5X_SZ_DEV_CS1	(32*1024*1024)
+#endif
+
+#if !defined (ORION5X_ADR_DEV_CS2)
+#define ORION5X_ADR_DEV_CS2	0xfa800000
+#endif
+
+#if !defined (ORION5X_SZ_DEV_CS2)
+#define ORION5X_SZ_DEV_CS2	(1*1024*1024)
+#endif
+
+#if !defined (ORION5X_ADR_BOOTROM)
+#define ORION5X_ADR_BOOTROM	0xFFF80000
+#endif
+
+#if !defined (ORION5X_SZ_BOOTROM)
+#define ORION5X_SZ_BOOTROM	(512*1024)
+#endif
+
+/*
+ * PCIE registers are used for SoC device ID and revision
+ */
+#define PCIE_DEV_ID_OFF         (ORION5X_REG_PCIE_BASE + 0x0000)
+#define PCIE_DEV_REV_OFF        (ORION5X_REG_PCIE_BASE + 0x0008)
+
+/*
+ * The following definitions are intended for identifying
+ * the real device and revision on which u-boot is running
+ * even if it was compiled only for a specific one. Thus,
+ * these constants must not be considered chip-specific.
+ */
+
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID        0x5181
+#define MV88F5181_REV_B1        3
+#define MV88F5181L_REV_A0       8
+#define MV88F5181L_REV_A1       9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID        0x5182
+#define MV88F5182_REV_A2        2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID        0x5281
+#define MV88F5281_REV_D0        4
+#define MV88F5281_REV_D1        5
+#define MV88F5281_REV_D2        6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID        0x6183
+#define MV88F6183_REV_B0        3
+
+/*
+ * read feroceon core extra feature register
+ * using co-proc instruction
+ */
+static inline unsigned int readfr_extra_feature_reg(void)
+{
+	unsigned int val;
+	asm volatile ("mrc p15, 1, %0, c15, c1, 0 @ readfr exfr" : "=r"
+			(val) : : "cc");
+	return val;
+}
+
+/*
+ * write feroceon core extra feature register
+ * using co-proc instruction
+ */
+static inline void writefr_extra_feature_reg(unsigned int val)
+{
+	asm volatile ("mcr p15, 1, %0, c15, c1, 0 @ writefr exfr" : : "r"
+			(val) : "cc");
+	isb();
+}
+
+/*
+ * AHB to Mbus Bridge Registers
+ * Source: 88F5182 User Manual, Appendix A, section A.4
+ * Note: only windows 0 and 1 have remap capability.
+ */
+struct orion5x_win_registers {
+	u32 ctrl;
+	u32 base;
+	u32 remap_lo;
+	u32 remap_hi;
+};
+
+/*
+ * CPU control and status Registers
+ * Source: 88F5182 User Manual, Appendix A, section A.4
+ */
+struct orion5x_cpu_registers {
+	u32 config;	/*0x20100 */
+	u32 ctrl_stat;	/*0x20104 */
+	u32 rstoutn_mask; /* 0x20108 */
+	u32 sys_soft_rst; /* 0x2010C */
+	u32 ahb_mbus_cause_irq; /* 0x20110 */
+	u32 ahb_mbus_mask_irq; /* 0x20114 */
+};
+
+/*
+ * DDR SDRAM Controller Address Decode Registers
+ * Source: 88F5182 User Manual, Appendix A, section A.5.1
+ */
+struct orion5x_ddr_addr_decode_registers {
+	u32 base;
+	u32 size;
+};
+
+/*
+ * functions
+ */
+u32 orion5x_device_id(void);
+u32 orion5x_device_rev(void);
+unsigned int orion5x_winctrl_calcsize(unsigned int sizeval);
+void timer_init_r(void);
+#endif /* __ASSEMBLY__ */
+#endif /* _ORION5X_CPU_H */
diff --git a/roms/u-boot/arch/arm/mach-orion5x/include/mach/mv88f5182.h b/roms/u-boot/arch/arm/mach-orion5x/include/mach/mv88f5182.h
new file mode 100644
index 000000000..0e9fe0dc5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/include/mach/mv88f5182.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirkwood 88F6182 support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * Header file for Feroceon CPU core 88F5182 SOC.
+ */
+
+#ifndef _CONFIG_88F5182_H
+#define _CONFIG_88F5182_H
+
+/* SOC specific definitions */
+#define F88F5182_REGS_PHYS_BASE		0xf1000000
+#define ORION5X_REGS_PHY_BASE		F88F5182_REGS_PHYS_BASE
+
+/* TCLK Core Clock defination */
+#define CONFIG_SYS_TCLK			166000000 /* 166MHz */
+
+#endif /* _CONFIG_88F5182_H */
diff --git a/roms/u-boot/arch/arm/mach-orion5x/include/mach/orion5x.h b/roms/u-boot/arch/arm/mach-orion5x/include/mach/orion5x.h
new file mode 100644
index 000000000..4b1b0b0f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirkwood support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * Header file for Marvell's Orion SoC with Feroceon CPU core.
+ */
+
+#ifndef _ASM_ARCH_ORION5X_H
+#define _ASM_ARCH_ORION5X_H
+
+#if defined(CONFIG_FEROCEON)
+
+/* SOC specific definations */
+#define ORION5X_REGISTER(x)			(ORION5X_REGS_PHY_BASE + x)
+
+/* Documented registers */
+#define ORION5X_DRAM_BASE			(ORION5X_REGISTER(0x01500))
+#define ORION5X_TWSI_BASE			(ORION5X_REGISTER(0x11000))
+#define ORION5X_UART0_BASE			(ORION5X_REGISTER(0x12000))
+#define ORION5X_UART1_BASE			(ORION5X_REGISTER(0x12100))
+#define ORION5X_MPP_BASE			(ORION5X_REGISTER(0x10000))
+#define ORION5X_GPIO_BASE			(ORION5X_REGISTER(0x10100))
+#define ORION5X_CPU_WIN_BASE			(ORION5X_REGISTER(0x20000))
+#define ORION5X_CPU_REG_BASE			(ORION5X_REGISTER(0x20100))
+#define ORION5X_TIMER_BASE			(ORION5X_REGISTER(0x20300))
+#define ORION5X_REG_PCI_BASE			(ORION5X_REGISTER(0x30000))
+#define ORION5X_REG_PCIE_BASE			(ORION5X_REGISTER(0x40000))
+#define ORION5X_USB20_PORT0_BASE		(ORION5X_REGISTER(0x50000))
+#define ORION5X_USB20_PORT1_BASE		(ORION5X_REGISTER(0xA0000))
+#define ORION5X_EGIGA_BASE			(ORION5X_REGISTER(0x72000))
+#define ORION5X_SATA_BASE			(ORION5X_REGISTER(0x80000))
+#define ORION5X_SATA_PORT0_OFFSET		0x2000
+#define ORION5X_SATA_PORT1_OFFSET		0x4000
+
+/* Orion5x GbE controller has a single port */
+#define MAX_MVGBE_DEVS	1
+#define MVGBE0_BASE	ORION5X_EGIGA_BASE
+
+/* Orion5x USB Host controller is port 1 */
+#define MVUSB0_BASE			ORION5X_USB20_HOST_PORT_BASE
+#define MVUSB0_CPU_ATTR_DRAM_CS0	ORION5X_ATTR_DRAM_CS0
+#define MVUSB0_CPU_ATTR_DRAM_CS1	ORION5X_ATTR_DRAM_CS1
+#define MVUSB0_CPU_ATTR_DRAM_CS2	ORION5X_ATTR_DRAM_CS2
+#define MVUSB0_CPU_ATTR_DRAM_CS3	ORION5X_ATTR_DRAM_CS3
+
+/* Kirkwood CPU memory windows */
+#define MVCPU_WIN_CTRL_DATA	ORION5X_CPU_WIN_CTRL_DATA
+#define MVCPU_WIN_ENABLE	ORION5X_WIN_ENABLE
+#define MVCPU_WIN_DISABLE	ORION5X_WIN_DISABLE
+
+#define CONFIG_MAX_RAM_BANK_SIZE		(64*1024*1024)
+
+/* include here SoC variants. 5181, 5281, 6183 should go here when
+   adding support for them, and this comment should then be updated. */
+#if defined(CONFIG_88F5182)
+#include <asm/arch/mv88f5182.h>
+#else
+#error "SOC Name not defined"
+#endif
+#endif /* CONFIG_FEROCEON */
+#endif /* _ASM_ARCH_ORION5X_H */
diff --git a/roms/u-boot/arch/arm/mach-orion5x/lowlevel_init.S b/roms/u-boot/arch/arm/mach-orion5x/lowlevel_init.S
new file mode 100644
index 000000000..aa3fcf7c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/lowlevel_init.S
@@ -0,0 +1,286 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <config.h>
+#include "asm/arch/orion5x.h"
+
+/*
+ * Configuration values for SDRAM access setup
+ */
+
+#define SDRAM_CONFIG			0x3148400
+#define SDRAM_MODE			0x62
+#define SDRAM_CONTROL			0x4041000
+#define SDRAM_TIME_CTRL_LOW		0x11602220
+#define SDRAM_TIME_CTRL_HI		0x40c
+#define SDRAM_OPEN_PAGE_EN		0x0
+/* DDR 1 2x 32M NANYA NT5DS16M16CS-6K ==> 64MB */
+#define SDRAM_BANK0_SIZE		0x3ff0001
+#define SDRAM_ADDR_CTRL			0x10
+
+#define SDRAM_OP_NOP			0x05
+#define SDRAM_OP_SETMODE		0x03
+
+#define SDRAM_PAD_CTRL_WR_EN		0x80000000
+#define SDRAM_PAD_CTRL_TUNE_EN		0x00010000
+#define SDRAM_PAD_CTRL_DRVN_MASK	0x0000003f
+#define SDRAM_PAD_CTRL_DRVP_MASK	0x00000fc0
+
+/*
+ * For Guideline MEM-3 - Drive Strength value
+ */
+
+#define DDR1_PAD_STRENGTH_DEFAULT	0x00001000
+#define SDRAM_PAD_CTRL_DRV_STR_MASK	0x00003000
+
+/*
+ * For Guideline MEM-4 - DQS Reference Delay Tuning
+ */
+
+#define MSAR_ARMDDRCLCK_MASK		0x000000f0
+#define MSAR_ARMDDRCLCK_H_MASK		0x00000100
+
+#define MSAR_ARMDDRCLCK_333_167		0x00000000
+#define MSAR_ARMDDRCLCK_500_167		0x00000030
+#define MSAR_ARMDDRCLCK_667_167		0x00000060
+#define MSAR_ARMDDRCLCK_400_200_1	0x000001E0
+#define MSAR_ARMDDRCLCK_400_200		0x00000010
+#define MSAR_ARMDDRCLCK_600_200		0x00000050
+#define MSAR_ARMDDRCLCK_800_200		0x00000070
+
+#define FTDLL_DDR1_166MHZ		0x0047F001
+
+#define FTDLL_DDR1_200MHZ		0x0044D001
+
+/*
+ * Low-level init happens right after start.S has switched to SVC32,
+ * flushed and disabled caches and disabled MMU. We're still running
+ * from the boot chip select, so the first thing SPL should do is to
+ * set up the RAM to copy U-Boot into.
+ */
+
+.globl lowlevel_init
+
+lowlevel_init:
+
+#ifdef CONFIG_SPL_BUILD
+
+	/* Use 'r2 as the base for internal register accesses */
+	ldr	r2, =ORION5X_REGS_PHY_BASE
+
+	/* move internal registers from the default 0xD0000000
+	 * to their intended location, defined by SoC */
+	ldr	r3, =0xD0000000
+	add	r3, r3, #0x20000
+	str	r2, [r3, #0x80]
+
+	/* Use R3 as the base for DRAM registers */
+	add	r3, r2, #0x01000
+
+	/*DDR SDRAM Initialization Control */
+	ldr	r0, =0x00000001
+	str	r0, [r3, #0x480]
+
+	/* Use R3 as the base for PCI registers */
+	add	r3, r2, #0x31000
+
+	/* Disable arbiter */
+	ldr	r0, =0x00000030
+	str	r0, [r3, #0xd00]
+
+	/* Use R3 as the base for DRAM registers */
+	add	r3, r2, #0x01000
+
+	/* set all dram windows to 0 */
+	mov	r0, #0
+	str	r0, [r3, #0x504]
+	str	r0, [r3, #0x50C]
+	str	r0, [r3, #0x514]
+	str	r0, [r3, #0x51C]
+
+	/* 1) Configure SDRAM  */
+	ldr	r0, =SDRAM_CONFIG
+	str	r0, [r3, #0x400]
+
+	/* 2) Set SDRAM Control reg */
+	ldr	r0, =SDRAM_CONTROL
+	str	r0, [r3, #0x404]
+
+	/* 3) Write SDRAM address control register */
+	ldr	r0, =SDRAM_ADDR_CTRL
+	str	r0, [r3, #0x410]
+
+	/* 4) Write SDRAM bank 0 size register */
+	ldr	r0, =SDRAM_BANK0_SIZE
+	str	r0, [r3, #0x504]
+	/* keep other banks disabled */
+
+	/* 5) Write SDRAM open pages control register */
+	ldr	r0, =SDRAM_OPEN_PAGE_EN
+	str	r0, [r3, #0x414]
+
+	/* 6) Write SDRAM timing Low register */
+	ldr	r0, =SDRAM_TIME_CTRL_LOW
+	str	r0, [r3, #0x408]
+
+	/* 7) Write SDRAM timing High register */
+	ldr	r0, =SDRAM_TIME_CTRL_HI
+	str	r0, [r3, #0x40C]
+
+	/* 8) Write SDRAM mode register */
+	/* The CPU must not attempt to change the SDRAM Mode register setting */
+	/* prior to DRAM controller completion of the DRAM initialization     */
+	/* sequence. To guarantee this restriction, it is recommended that    */
+	/* the CPU sets the SDRAM Operation register to NOP command, performs */
+	/* read polling until the register is back in Normal operation value, */
+	/* and then sets SDRAM Mode register to its new value.		      */
+
+	/* 8.1 write 'nop' to SDRAM operation */
+	ldr	r0, =SDRAM_OP_NOP
+	str	r0, [r3, #0x418]
+
+	/* 8.2 poll SDRAM operation until back in 'normal' mode.  */
+1:
+	ldr	r0, [r3, #0x418]
+	cmp	r0, #0
+	bne	1b
+
+	/* 8.3 Now its safe to write new value to SDRAM Mode register	      */
+	ldr	r0, =SDRAM_MODE
+	str	r0, [r3, #0x41C]
+
+	/* 8.4 Set new mode */
+	ldr	r0, =SDRAM_OP_SETMODE
+	str	r0, [r3, #0x418]
+
+	/* 8.5 poll SDRAM operation until back in 'normal' mode.  */
+2:
+	ldr	r0, [r3, #0x418]
+	cmp	r0, #0
+	bne	2b
+
+	/* DDR SDRAM Address/Control Pads Calibration */
+	ldr	r0, [r3, #0x4C0]
+
+	/* Set Bit [31] to make the register writable			*/
+	orr	r0, r0, #SDRAM_PAD_CTRL_WR_EN
+	str	r0, [r3, #0x4C0]
+
+	bic	r0, r0, #SDRAM_PAD_CTRL_WR_EN
+	bic	r0, r0, #SDRAM_PAD_CTRL_TUNE_EN
+	bic	r0, r0, #SDRAM_PAD_CTRL_DRVN_MASK
+	bic	r0, r0, #SDRAM_PAD_CTRL_DRVP_MASK
+
+	/* Get the final N locked value of driving strength [22:17]	*/
+	mov	r1, r0
+	mov	r1, r1, LSL #9
+	mov	r1, r1, LSR #26	 /* r1[5:0]<DrvN>  = r3[22:17]<LockN>	*/
+	orr	r1, r1, r1, LSL #6 /* r1[11:6]<DrvP> = r1[5:0]<DrvN>	*/
+
+	/* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6]	*/
+	orr	r0, r0, r1
+	str	r0, [r3, #0x4C0]
+
+	/* DDR SDRAM Data Pads Calibration				*/
+	ldr	r0, [r3, #0x4C4]
+
+	/* Set Bit [31] to make the register writable			*/
+	orr	r0, r0, #SDRAM_PAD_CTRL_WR_EN
+	str	r0, [r3, #0x4C4]
+
+	bic	r0, r0, #SDRAM_PAD_CTRL_WR_EN
+	bic	r0, r0, #SDRAM_PAD_CTRL_TUNE_EN
+	bic	r0, r0, #SDRAM_PAD_CTRL_DRVN_MASK
+	bic	r0, r0, #SDRAM_PAD_CTRL_DRVP_MASK
+
+	/* Get the final N locked value of driving strength [22:17]	*/
+	mov	r1, r0
+	mov	r1, r1, LSL #9
+	mov	r1, r1, LSR #26
+	orr	r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17]<LockN>	*/
+
+	/* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6]	*/
+	orr	r0, r0, r1
+
+	str	r0, [r3, #0x4C4]
+
+	/* Implement Guideline (GL# MEM-3) Drive Strength Value		*/
+	/* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0		*/
+
+	ldr	r1, =DDR1_PAD_STRENGTH_DEFAULT
+
+	/* Enable writes to DDR SDRAM Addr/Ctrl Pads Calibration register */
+	ldr	r0, [r3, #0x4C0]
+	orr	r0, r0, #SDRAM_PAD_CTRL_WR_EN
+	str	r0, [r3, #0x4C0]
+
+	/* Correct strength and disable writes again */
+	bic	r0, r0, #SDRAM_PAD_CTRL_WR_EN
+	bic	r0, r0, #SDRAM_PAD_CTRL_DRV_STR_MASK
+	orr	r0, r0, r1
+	str	r0, [r3, #0x4C0]
+
+	/* Enable writes to DDR SDRAM Data Pads Calibration register */
+	ldr	r0, [r3, #0x4C4]
+	orr	r0, r0, #SDRAM_PAD_CTRL_WR_EN
+	str	r0, [r3, #0x4C4]
+
+	/* Correct strength and disable writes again */
+	bic	r0, r0, #SDRAM_PAD_CTRL_DRV_STR_MASK
+	bic	r0, r0, #SDRAM_PAD_CTRL_WR_EN
+	orr	r0, r0, r1
+	str	r0, [r3, #0x4C4]
+
+	/* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning	*/
+	/* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0		*/
+
+	/* Get the "sample on reset" register for the DDR frequancy	*/
+	ldr	r3, =0x10000
+	ldr	r0, [r3, #0x010]
+	ldr	r1, =MSAR_ARMDDRCLCK_MASK
+	and	r1, r0, r1
+
+	ldr	r0, =FTDLL_DDR1_166MHZ
+	cmp	r1, #MSAR_ARMDDRCLCK_333_167
+	beq	3f
+	cmp	r1, #MSAR_ARMDDRCLCK_500_167
+	beq	3f
+	cmp	r1, #MSAR_ARMDDRCLCK_667_167
+	beq	3f
+
+	ldr	r0, =FTDLL_DDR1_200MHZ
+	cmp	r1, #MSAR_ARMDDRCLCK_400_200_1
+	beq	3f
+	cmp	r1, #MSAR_ARMDDRCLCK_400_200
+	beq	3f
+	cmp	r1, #MSAR_ARMDDRCLCK_600_200
+	beq	3f
+	cmp	r1, #MSAR_ARMDDRCLCK_800_200
+	beq	3f
+
+	ldr	r0, =0
+
+3:
+	/* Use R3 as the base for DRAM registers */
+	add	r3, r2, #0x01000
+
+	ldr	r2, [r3, #0x484]
+	orr	r2, r2, r0
+	str	r2, [r3, #0x484]
+
+	/* enable for 2 GB DDR; detection should find out real amount */
+	sub	r0, r0, r0
+	str	r0, [r3, #0x500]
+	ldr	r0, =0x7fff0001
+	str	r0, [r3, #0x504]
+
+#endif /* CONFIG_SPL_BUILD */
+
+	/* Return to U-Boot via saved link register */
+	mov	pc, lr
diff --git a/roms/u-boot/arch/arm/mach-orion5x/timer.c b/roms/u-boot/arch/arm/mach-orion5x/timer.c
new file mode 100644
index 000000000..0adf3dcc6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/timer.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+  * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirkwood support which is
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#define UBOOT_CNTR	0	/* counter to use for uboot timer */
+
+/* Timer reload and current value registers */
+struct orion5x_tmr_val {
+	u32 reload;	/* Timer reload reg */
+	u32 val;	/* Timer value reg */
+};
+
+/* Timer registers */
+struct orion5x_tmr_registers {
+	u32 ctrl;	/* Timer control reg */
+	u32 pad[3];
+	struct orion5x_tmr_val tmr[2];
+	u32 wdt_reload;
+	u32 wdt_val;
+};
+
+struct orion5x_tmr_registers *orion5x_tmr_regs =
+	(struct orion5x_tmr_registers *)ORION5X_TIMER_BASE;
+
+/*
+ * ARM Timers Registers Map
+ */
+#define CNTMR_CTRL_REG			(&orion5x_tmr_regs->ctrl)
+#define CNTMR_RELOAD_REG(tmrnum)	(&orion5x_tmr_regs->tmr[tmrnum].reload)
+#define CNTMR_VAL_REG(tmrnum)		(&orion5x_tmr_regs->tmr[tmrnum].val)
+
+/*
+ * ARM Timers Control Register
+ * CPU_TIMERS_CTRL_REG (CTCR)
+ */
+#define CTCR_ARM_TIMER_EN_OFFS(cntr)	(cntr * 2)
+#define CTCR_ARM_TIMER_EN_MASK(cntr)	(1 << CTCR_ARM_TIMER_EN_OFFS)
+#define CTCR_ARM_TIMER_EN(cntr)		(1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+#define CTCR_ARM_TIMER_DIS(cntr)	(0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+
+#define CTCR_ARM_TIMER_AUTO_OFFS(cntr)	((cntr * 2) + 1)
+#define CTCR_ARM_TIMER_AUTO_MASK(cntr)	(1 << 1)
+#define CTCR_ARM_TIMER_AUTO_EN(cntr)	(1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+#define CTCR_ARM_TIMER_AUTO_DIS(cntr)	(0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+
+/*
+ * ARM Timer\Watchdog Reload Register
+ * CNTMR_RELOAD_REG (TRR)
+ */
+#define TRG_ARM_TIMER_REL_OFFS		0
+#define TRG_ARM_TIMER_REL_MASK		0xffffffff
+
+/*
+ * ARM Timer\Watchdog Register
+ * CNTMR_VAL_REG (TVRG)
+ */
+#define TVR_ARM_TIMER_OFFS		0
+#define TVR_ARM_TIMER_MASK		0xffffffff
+#define TVR_ARM_TIMER_MAX		0xffffffff
+#define TIMER_LOAD_VAL 			0xffffffff
+
+static inline ulong read_timer(void)
+{
+	return readl(CNTMR_VAL_REG(UBOOT_CNTR))
+	      / (CONFIG_SYS_TCLK / 1000);
+}
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
+
+static ulong get_timer_masked(void)
+{
+	ulong now = read_timer();
+
+	if (lastdec >= now) {
+		/* normal mode */
+		timestamp += lastdec - now;
+	} else {
+		/* we have an overflow ... */
+		timestamp += lastdec +
+			(TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+static inline ulong uboot_cntr_val(void)
+{
+	return readl(CNTMR_VAL_REG(UBOOT_CNTR));
+}
+
+void __udelay(unsigned long usec)
+{
+	uint current;
+	ulong delayticks;
+
+	current = uboot_cntr_val();
+	delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
+
+	if (current < delayticks) {
+		delayticks -= current;
+		while (uboot_cntr_val() < current)
+			;
+		while ((TIMER_LOAD_VAL - delayticks) < uboot_cntr_val())
+			;
+	} else {
+		while (uboot_cntr_val() > (current - delayticks))
+			;
+	}
+}
+
+/*
+ * init the counter
+ */
+int timer_init(void)
+{
+	unsigned int cntmrctrl;
+
+	/* load value into timer */
+	writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
+	writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
+
+	/* enable timer in auto reload mode */
+	cntmrctrl = readl(CNTMR_CTRL_REG);
+	cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
+	cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
+	writel(cntmrctrl, CNTMR_CTRL_REG);
+	return 0;
+}
+
+void timer_init_r(void)
+{
+	/* init the timestamp and lastdec value */
+	lastdec = read_timer();
+	timestamp = 0;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return (ulong)CONFIG_SYS_HZ;
+}
diff --git a/roms/u-boot/arch/arm/mach-orion5x/u-boot-spl.lds b/roms/u-boot/arch/arm/mach-orion5x/u-boot-spl.lds
new file mode 100644
index 000000000..a537fe029
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-orion5x/u-boot-spl.lds
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on:
+ *
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Based on omap-common/u-boot-spl.lds:
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ */
+MEMORY { .nor : ORIGIN = IMAGE_TEXT_BASE,\
+		LENGTH = IMAGE_MAX_SIZE }
+MEMORY { .bss : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+		__start = .;
+		*(.vectors)
+		CPUDIR/start.o	(.text)
+		*(.text*)
+	} > .nor
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.nor
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.nor
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	} > .nor
+
+	. = ALIGN(4);
+	__image_copy_end = .;
+	_end = .;
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} > .bss
+}
diff --git a/roms/u-boot/arch/arm/mach-owl/Kconfig b/roms/u-boot/arch/arm/mach-owl/Kconfig
new file mode 100644
index 000000000..cde2ade30
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-owl/Kconfig
@@ -0,0 +1,27 @@
+if ARCH_OWL
+
+choice
+        prompt "Actions Semi Owl SoC Variant"
+        optional
+
+config MACH_S900
+        bool "Actions Semi S900 SoC"
+        select ARM64
+
+config MACH_S700
+        bool "Actions Semi S700 SoC"
+        select ARM64
+
+endchoice
+
+config SYS_TEXT_BASE
+        default 0x11000000
+
+config SYS_CONFIG_NAME
+        default "owl-common"
+
+config SYS_SOC
+        default "s900" if MACH_S900
+        default "s700" if MACH_S700
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-owl/Makefile b/roms/u-boot/arch/arm/mach-owl/Makefile
new file mode 100644
index 000000000..f3a69ebf1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-owl/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier:	GPL-2.0+
+
+obj-y += soc.o
+obj-$(CONFIG_ARM64) += sysmap-owl.o
diff --git a/roms/u-boot/arch/arm/mach-owl/soc.c b/roms/u-boot/arch/arm/mach-owl/soc.c
new file mode 100644
index 000000000..4baef2eed
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-owl/soc.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Actions Semi Owl SoCs platform support.
+ *
+ * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <cpu_func.h>
+#include <init.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <linux/arm-smccc.h>
+#include <linux/psci.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/psci.h>
+
+#define DMM_INTERLEAVE_PER_CH_CFG	0xe0290028
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int owl_get_ddrcap(void)
+{
+	unsigned int val, cap;
+
+	/* ddr capacity register initialized by ddr driver
+	 * in early bootloader
+	 */
+#if defined(CONFIG_MACH_S700)
+	val = (readl(DMM_INTERLEAVE_PER_CH_CFG) >> 8) & 0x7;
+	cap =  (val + 1) * 256;
+#elif defined(CONFIG_MACH_S900)
+	val = (readl(DMM_INTERLEAVE_PER_CH_CFG) >> 8) & 0xf;
+	cap =  64 * (1 << val);
+#endif
+
+	return cap;
+}
+
+/*
+ * dram_init - sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+	gd->ram_size = owl_get_ddrcap() * 1024 * 1024;
+	return 0;
+}
+
+/* This is called after dram_init() so use get_ram_size result */
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+static void show_psci_version(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(ARM_PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0, 0, 0, 0, 0, &res);
+
+	printf("PSCI:  v%ld.%ld\n",
+		PSCI_VERSION_MAJOR(res.a0),
+		PSCI_VERSION_MINOR(res.a0));
+}
+
+int board_init(void)
+{
+	show_psci_version();
+
+	return 0;
+}
+
+void reset_cpu(void)
+{
+	psci_system_reset();
+}
diff --git a/roms/u-boot/arch/arm/mach-owl/sysmap-owl.c b/roms/u-boot/arch/arm/mach-owl/sysmap-owl.c
new file mode 100644
index 000000000..81f6ca2e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-owl/sysmap-owl.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Memory map for Actions Semi Owl series SoCs.
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+static struct mm_region owl_mem_map[] = {
+	{
+		.virt = 0x0UL, /* DDR */
+		.phys = 0x0UL, /* DDR */
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xE0000000UL, /* Peripheral block */
+		.phys = 0xE0000000UL, /* Peripheral block */
+		.size = 0x08000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = owl_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-qemu/Kconfig b/roms/u-boot/arch/arm/mach-qemu/Kconfig
new file mode 100644
index 000000000..186c3582e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-qemu/Kconfig
@@ -0,0 +1,30 @@
+if ARCH_QEMU
+
+config SYS_VENDOR
+	default "emulation"
+
+config SYS_BOARD
+	default "qemu-arm"
+
+config SYS_CONFIG_NAME
+	default "qemu-arm"
+
+choice
+	prompt "QEMU ARM architecture"
+	default TARGET_QEMU_ARM_64BIT
+
+config TARGET_QEMU_ARM_32BIT
+	bool "ARMv7-A, 32bit"
+	select ARCH_SUPPORT_PSCI
+	select BOARD_LATE_INIT
+	select CPU_V7A
+	select SYS_ARCH_TIMER
+
+config TARGET_QEMU_ARM_64BIT
+	bool "ARMv8, 64bit"
+	select ARM64
+	select BOARD_LATE_INIT
+
+endchoice
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rmobile/Kconfig b/roms/u-boot/arch/arm/mach-rmobile/Kconfig
new file mode 100644
index 000000000..41322b2c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/Kconfig
@@ -0,0 +1,47 @@
+if ARCH_RMOBILE
+
+choice
+	prompt "Target Renesas SoC select"
+	default RCAR_32
+
+config RCAR_32
+	bool "Renesas ARM SoCs R-Car Gen1/Gen2 (32bit)"
+	select CPU_V7A
+
+config RCAR_GEN3
+	bool "Renesas ARM SoCs R-Car Gen3 (64bit)"
+	select ARM64
+	select PHY
+	select CMD_CACHE
+	select OF_BOARD_SETUP
+	select PINCTRL
+	select PINCONF
+	select PINCTRL_PFC
+	select SUPPORT_SPL
+	imply CMD_FS_UUID
+	imply CMD_GPT
+	imply CMD_UUID
+	imply CMD_MMC_SWRITE if MMC
+	imply SUPPORT_EMMC_RPMB if MMC
+	imply SPL
+	imply SPL_BOARD_INIT
+	imply SPL_GZIP
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_SERIAL_SUPPORT
+	imply SPL_SYS_MALLOC_SIMPLE
+	imply SPL_TINY_MEMSET
+	imply SPL_YMODEM_SUPPORT
+	imply SPL_USE_TINY_PRINTF
+
+config RZA1
+	prompt "Renesas ARM SoCs RZ/A1 (32bit)"
+	select CPU_V7A
+
+endchoice
+
+source "arch/arm/mach-rmobile/Kconfig.32"
+source "arch/arm/mach-rmobile/Kconfig.64"
+source "arch/arm/mach-rmobile/Kconfig.rza1"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rmobile/Kconfig.32 b/roms/u-boot/arch/arm/mach-rmobile/Kconfig.32
new file mode 100644
index 000000000..d5e437f0d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/Kconfig.32
@@ -0,0 +1,171 @@
+if RCAR_32
+
+config ARCH_RMOBILE_BOARD_STRING
+	string "Renesas RCar Gen2 board name"
+	default "Board"
+
+config RCAR_GEN2
+	bool "Renesas RCar Gen2"
+	select PHY
+	select PHY_RCAR_GEN2
+
+config R8A7740
+	bool "Renesas SoC R8A7740"
+
+config R8A7790
+	bool "Renesas SoC R8A7790"
+	select RCAR_GEN2
+	select ARM_CORTEX_A15_CVE_2017_5715
+	imply CLK_R8A7790
+	imply PINCTRL_PFC_R8A7790
+
+config R8A7791
+	bool "Renesas SoC R8A7791"
+	select RCAR_GEN2
+	select ARM_CORTEX_A15_CVE_2017_5715
+	imply CLK_R8A7791
+	imply PINCTRL_PFC_R8A7791
+
+config R8A7792
+	bool "Renesas SoC R8A7792"
+	select RCAR_GEN2
+	select ARM_CORTEX_A15_CVE_2017_5715
+	imply CLK_R8A7792
+	imply PINCTRL_PFC_R8A7792
+
+config R8A7793
+	bool "Renesas SoC R8A7793"
+	select RCAR_GEN2
+	select ARM_CORTEX_A15_CVE_2017_5715
+	imply CLK_R8A7793
+	imply PINCTRL_PFC_R8A7793
+
+config R8A7794
+	bool "Renesas SoC R8A7794"
+	select RCAR_GEN2
+	imply CLK_R8A7794
+	imply PINCTRL_PFC_R8A7794
+
+choice
+	prompt "Renesas ARM SoCs board select"
+	optional
+
+config TARGET_ARMADILLO_800EVA
+	bool "armadillo 800 eva board"
+
+config TARGET_BLANCHE
+	bool "Blanche board"
+	select DM
+	select DM_SERIAL
+	imply CMD_DM
+
+config TARGET_GOSE
+	bool "Gose board"
+	select DM
+	select DM_SERIAL
+	select SPL_TINY_MEMSET
+	select SUPPORT_SPL
+	select SPL_USE_TINY_PRINTF
+	imply CMD_DM
+
+config TARGET_KOELSCH
+	bool "Koelsch board"
+	select DM
+	select DM_SERIAL
+	select SPL_TINY_MEMSET
+	select SUPPORT_SPL
+	select SPL_USE_TINY_PRINTF
+	imply CMD_DM
+
+config TARGET_LAGER
+	bool "Lager board"
+	select DM
+	select DM_SERIAL
+	select SPL_TINY_MEMSET
+	select SUPPORT_SPL
+	select SPL_USE_TINY_PRINTF
+	imply CMD_DM
+
+config TARGET_KZM9G
+	bool "KZM9D board"
+
+config TARGET_ALT
+	bool "Alt board"
+	select DM
+	select DM_SERIAL
+	select SPL_TINY_MEMSET
+	select SUPPORT_SPL
+	select SPL_USE_TINY_PRINTF
+	imply CMD_DM
+
+config TARGET_SILK
+	bool "Silk board"
+	select DM
+	select DM_SERIAL
+	select SPL_TINY_MEMSET
+	select SUPPORT_SPL
+	select SPL_USE_TINY_PRINTF
+	imply CMD_DM
+
+config TARGET_PORTER
+	bool "Porter board"
+	select DM
+	select DM_SERIAL
+	select SPL_TINY_MEMSET
+	select SUPPORT_SPL
+	select SPL_USE_TINY_PRINTF
+	imply CMD_DM
+
+config TARGET_STOUT
+	bool "Stout board"
+	select DM
+	select DM_SERIAL
+	select SPL_TINY_MEMSET
+	select SUPPORT_SPL
+	select SPL_USE_TINY_PRINTF
+	imply CMD_DM
+
+endchoice
+
+config SYS_SOC
+	default "rmobile"
+
+config RMOBILE_EXTRAM_BOOT
+	bool "Enable boot from RAM"
+	depends on TARGET_ALT || TARGET_BLANCHE || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK || TARGET_STOUT
+	default n
+
+choice
+	prompt "Qos setting primary"
+	depends on TARGET_ALT || TARGET_BLANCHE || TARGET_GOSE || TARGET_KOELSCH || TARGET_LAGER
+	default QOS_PRI_NORMAL
+
+config QOS_PRI_NORMAL
+	bool "Non primary"
+	help
+	   Select normal mode for QoS setting.
+
+config QOS_PRI_MEDIA
+	bool "Media primary"
+	help
+	   Select multimedia primary mode for QoS setting.
+
+config QOS_PRI_GFX
+	bool "GFX primary"
+	help
+	   Select GFX(graphics) primary mode for QoS setting.
+
+endchoice
+
+source "board/atmark-techno/armadillo-800eva/Kconfig"
+source "board/renesas/blanche/Kconfig"
+source "board/renesas/gose/Kconfig"
+source "board/renesas/koelsch/Kconfig"
+source "board/renesas/lager/Kconfig"
+source "board/kmc/kzm9g/Kconfig"
+source "board/renesas/alt/Kconfig"
+source "board/renesas/silk/Kconfig"
+source "board/renesas/porter/Kconfig"
+source "board/renesas/stout/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rmobile/Kconfig.64 b/roms/u-boot/arch/arm/mach-rmobile/Kconfig.64
new file mode 100644
index 000000000..c621f8a54
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/Kconfig.64
@@ -0,0 +1,180 @@
+if RCAR_GEN3
+
+menu "Select Target SoC"
+
+config R8A774A1
+	bool "Renesas SoC R8A774A1"
+	imply CLK_R8A774A1
+	imply PINCTRL_PFC_R8A774A1
+
+config R8A774B1
+	bool "Renesas SoC R8A774B1"
+	imply CLK_R8A774B1
+	imply PINCTRL_PFC_R8A774B1
+
+config R8A774C0
+	bool "Renesas SoC R8A774C0"
+	imply CLK_R8A774C0
+	imply PINCTRL_PFC_R8A774C0
+
+config R8A774E1
+	bool "Renesas SoC R8A774E1"
+	imply CLK_R8A774E1
+	imply PINCTRL_PFC_R8A774E1
+
+config R8A7795
+	bool "Renesas SoC R8A7795"
+	imply CLK_R8A7795
+	imply PINCTRL_PFC_R8A7795
+
+config R8A7796
+	bool "Renesas SoC R8A7796"
+	imply CLK_R8A7796
+	imply PINCTRL_PFC_R8A7796
+
+config R8A77965
+	bool "Renesas SoC R8A77965"
+	imply CLK_R8A77965
+	imply PINCTRL_PFC_R8A77965
+
+config R8A77970
+	bool "Renesas SoC R8A77970"
+	imply CLK_R8A77970
+	imply PINCTRL_PFC_R8A77970
+
+config R8A77980
+	bool "Renesas SoC R8A77980"
+	imply CLK_R8A77980
+	imply PINCTRL_PFC_R8A77980
+
+config R8A77990
+	bool "Renesas SoC R8A77990"
+	imply CLK_R8A77990
+	imply PINCTRL_PFC_R8A77990
+
+config R8A77995
+	bool "Renesas SoC R8A77995"
+	imply CLK_R8A77995
+	imply PINCTRL_PFC_R8A77995
+
+config RZ_G2
+	bool "Renesas ARM SoCs RZ/G2 (64bit)"
+
+endmenu
+
+choice
+	prompt "Renesas ARM64 SoCs board select"
+	optional
+
+config TARGET_BEACON_RZG2H
+	bool "Beacon EmbeddedWorks RZ/G2H Dev Kit"
+	select R8A774E1
+	select RZ_G2
+	select PINCTRL_PFC_R8A774E1
+
+config TARGET_BEACON_RZG2M
+	bool "Beacon EmbeddedWorks RZ/G2M Dev Kit"
+	select R8A774A1
+	select RZ_G2
+	select PINCTRL_PFC_R8A774A1
+
+config TARGET_BEACON_RZG2N
+	bool "Beacon EmbeddedWorks RZ/G2N Dev Kit"
+	select R8A774B1
+	select RZ_G2
+	select PINCTRL_PFC_R8A774B1
+
+config TARGET_CONDOR
+	bool "Condor board"
+	imply R8A77980
+	help
+          Support for Renesas R-Car Gen3 Condor platform
+
+config TARGET_DRAAK
+	bool "Draak board"
+	imply R8A77995
+	help
+          Support for Renesas R-Car Gen3 Draak platform
+
+config TARGET_EAGLE
+	bool "Eagle board"
+	imply R8A77970
+	help
+          Support for Renesas R-Car Gen3 Eagle platform
+
+config TARGET_EBISU
+	bool "Ebisu board"
+	imply R8A77990
+	help
+          Support for Renesas R-Car Gen3 Ebisu platform
+
+config TARGET_HIHOPE_RZG2
+	bool "HiHope RZ/G2 board"
+	imply R8A774A1
+	imply R8A774B1
+	imply R8A774E1
+	imply RZ_G2
+	imply SYS_MALLOC_F
+	imply MULTI_DTB_FIT
+	imply MULTI_DTB_FIT_USER_DEFINED_AREA
+	help
+          Support for RZG2 HiHope platform
+
+config TARGET_SILINUX_EK874
+	bool "Silicon Linux EK874 board"
+	imply R8A774C0
+	imply RZ_G2
+	help
+          Support for Silicon Linux EK874 platform
+
+config TARGET_SALVATOR_X
+	bool "Salvator-X board"
+	imply R8A7795
+	imply R8A7796
+	imply R8A77965
+	imply SYS_MALLOC_F
+	imply MULTI_DTB_FIT
+	imply MULTI_DTB_FIT_USER_DEFINED_AREA
+	help
+          Support for Renesas R-Car Gen3 platform
+
+config TARGET_ULCB
+	bool "ULCB board"
+	imply R8A7795
+	imply R8A7796
+	imply R8A77965
+	imply SYS_MALLOC_F
+	imply MULTI_DTB_FIT
+	imply MULTI_DTB_FIT_USER_DEFINED_AREA
+	help
+          Support for Renesas R-Car Gen3 ULCB platform
+
+endchoice
+
+config SYS_SOC
+	default "rmobile"
+
+source "board/renesas/condor/Kconfig"
+source "board/renesas/draak/Kconfig"
+source "board/renesas/eagle/Kconfig"
+source "board/renesas/ebisu/Kconfig"
+source "board/renesas/salvator-x/Kconfig"
+source "board/renesas/ulcb/Kconfig"
+source "board/beacon/beacon-rzg2m/Kconfig"
+source "board/hoperun/hihope-rzg2/Kconfig"
+source "board/silinux/ek874/Kconfig"
+
+config MULTI_DTB_FIT_UNCOMPRESS_SZ
+	default 0x80000 if TARGET_HIHOPE_RZG2
+	default 0x80000 if TARGET_SALVATOR_X
+	default 0x80000 if TARGET_ULCB
+
+config MULTI_DTB_FIT_USER_DEF_ADDR
+	default 0x49000000 if TARGET_HIHOPE_RZG2
+	default 0x49000000 if TARGET_SALVATOR_X
+	default 0x49000000 if TARGET_ULCB
+
+config SYS_MALLOC_F_LEN
+	default 0x8000 if RCAR_GEN3
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rmobile/Kconfig.rza1 b/roms/u-boot/arch/arm/mach-rmobile/Kconfig.rza1
new file mode 100644
index 000000000..8cf033fb1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/Kconfig.rza1
@@ -0,0 +1,28 @@
+if RZA1
+
+# required by the Ethernet driver
+config R7S72100
+	bool
+	default y
+
+# required by serial and usb driver
+config CPU_RZA1
+	bool
+	default y
+
+choice
+	prompt "Renesas RZ/A1 board select"
+
+# Renesas Supported Boards
+config TARGET_GRPEACH
+	bool "GR-PEACH board"
+
+endchoice
+
+config SYS_SOC
+	default "rmobile"
+
+# Renesas Supported Boards
+source "board/renesas/grpeach/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rmobile/Makefile b/roms/u-boot/arch/arm/mach-rmobile/Makefile
new file mode 100644
index 000000000..81a0dedb4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/Makefile
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y = cpu_info.o
+obj-y += emac.o
+
+obj-$(CONFIG_DISPLAY_BOARDINFO) += board.o
+obj-$(CONFIG_GLOBAL_TIMER) += timer.o
+obj-$(CONFIG_TMU_TIMER) += ../../sh/lib/time.o
+obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o
+obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o
+obj-$(CONFIG_RCAR_GEN2) += lowlevel_init_ca15.o cpu_info-rcar.o
+obj-$(CONFIG_RCAR_GEN3) += lowlevel_init_gen3.o cpu_info-rcar.o memmap-gen3.o
+obj-$(CONFIG_RZ_G2) += cpu_info-rzg.o
+
+OBJCOPYFLAGS_u-boot-spl.srec := -O srec
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) --gap-fill=0x00 $(OBJCOPYFLAGS) \
+	$(OBJCOPYFLAGS_$(@F)) $< $@
+
+spl/u-boot-spl.srec: spl/u-boot-spl FORCE
+	$(call if_changed,objcopy)
+
+ifneq ($(CONFIG_R8A774C0)$(CONFIG_R8A77990)$(CONFIG_R8A77995),)
+#
+# The first 6 generate statements generate the R-Car Gen3 SCIF loader header.
+# The subsequent generate statements represent the following chunk of assembler
+# code, which copies the loaded data from 0xe6304030 to 0xe6318000. This is to
+# work around a limitation of the D3/E3 BootROM, which does not permit loading
+# to 0xe6318000 directly.
+#
+#	mov	x0,	#0xe6000000
+#	orr	x0, x0,	#0x00300000
+#	orr	x1, x0,	#0x00004000
+#	orr	x1, x1,	#0x00000030
+#
+#	orr	x2, x0,	#0x00018000
+#	mov	x0, x2
+#	mov	x3,	#0x7000
+#1:	ldp	x4, x5, [x1], #16
+#
+#	stp	x4, x5, [x2], #16
+#	subs	x3, x3, #16
+#	b.ge	1b
+#	br	x0
+#
+quiet_cmd_srec_cat = SRECCAT $@
+      cmd_srec_cat = srec_cat -output $@ -M 8 $< -M 8 \
+			-offset -0x13fd0 \
+			-Output_Block_Size 16 \
+			-generate 0xe6300400 0xe6300404 -l-e-constant 0x0 4 \
+			-generate 0xe630048c 0xe6300490 -l-e-constant 0x0 4 \
+			-generate 0xe63005d4 0xe63005d8 -l-e-constant 0xe6304000 4 \
+			-generate 0xe63006e4 0xe63006e8 -l-e-constant $2 4 \
+			-generate 0xe6301154 0xe6301158 -l-e-constant 0xe6304000 4 \
+			-generate 0xe6301264 0xe6301268 -l-e-constant $2 4 \
+			-generate 0xe6304000 0xe6304004 -l-e-constant 0xd2bcc000 4 \
+			-generate 0xe6304004 0xe6304008 -l-e-constant 0xb26c0400 4 \
+			-generate 0xe6304008 0xe630400c -l-e-constant 0xb2720001 4 \
+			-generate 0xe630400c 0xe6304010 -l-e-constant 0xb27c0421 4 \
+			-generate 0xe6304010 0xe6304014 -l-e-constant 0xb2710402 4 \
+			-generate 0xe6304014 0xe6304018 -l-e-constant 0xaa0203e0 4 \
+			-generate 0xe6304018 0xe630401c -l-e-constant 0xd28e0003 4 \
+			-generate 0xe630401c 0xe6304020 -l-e-constant 0xa8c11424 4 \
+			-generate 0xe6304020 0xe6304024 -l-e-constant 0xa8811444 4 \
+			-generate 0xe6304024 0xe6304028 -l-e-constant 0xf1004063 4 \
+			-generate 0xe6304028 0xe630402c -l-e-constant 0x54ffffaa 4 \
+			-generate 0xe630402c 0xe6304030 -l-e-constant 0xd61f0000 4
+else
+quiet_cmd_srec_cat = SRECCAT $@
+      cmd_srec_cat = srec_cat -output $@ -M 8 $< -M 8 \
+			-Output_Block_Size 16 \
+			-generate 0xe6300400 0xe6300404 -l-e-constant 0x0 4 \
+			-generate 0xe630048c 0xe6300490 -l-e-constant 0x0 4 \
+			-generate 0xe63005d4 0xe63005d8 -l-e-constant $(CONFIG_SPL_TEXT_BASE) 4 \
+			-generate 0xe63006e4 0xe63006e8 -l-e-constant $2 4 \
+			-generate 0xe6301154 0xe6301158 -l-e-constant $(CONFIG_SPL_TEXT_BASE) 4 \
+			-generate 0xe6301264 0xe6301268 -l-e-constant $2 4
+endif
+
+spl/u-boot-spl.scif: spl/u-boot-spl.srec spl/u-boot-spl.bin
+	$(call cmd,srec_cat,$(shell wc -c spl/u-boot-spl.bin | awk '{printf("0x%08x\n",$$1)}'))
+
+# if srec_cat is present build u-boot-spl.scif by default
+has_srec_cat = $(call try-run,srec_cat -VERSion,y,n)
+INPUTS-$(has_srec_cat) += u-boot-spl.scif
+CLEAN_FILES += u-boot-spl.scif
diff --git a/roms/u-boot/arch/arm/mach-rmobile/board.c b/roms/u-boot/arch/arm/mach-rmobile/board.c
new file mode 100644
index 000000000..a10371f74
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/board.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ */
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_ARCH_RMOBILE_BOARD_STRING
+int checkboard(void)
+{
+	printf("Board: %s\n", CONFIG_ARCH_RMOBILE_BOARD_STRING);
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rmobile/cpu_info-r8a7740.c b/roms/u-boot/arch/arm/mach-rmobile/cpu_info-r8a7740.c
new file mode 100644
index 000000000..dcbe25f37
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/cpu_info-r8a7740.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ */
+#include <common.h>
+#include <asm/io.h>
+
+u32 rmobile_get_cpu_type(void)
+{
+	u32 id;
+	u32 type;
+	struct r8a7740_hpb *hpb = (struct r8a7740_hpb *)HPB_BASE;
+
+	id = readl(hpb->cccr);
+	type = (id >> 8) & 0xFF;
+
+	return type;
+}
+
+u32 rmobile_get_cpu_rev(void)
+{
+	u32 id;
+	u32 rev;
+	struct r8a7740_hpb *hpb = (struct r8a7740_hpb *)HPB_BASE;
+
+	id = readl(hpb->cccr);
+	rev = (id >> 4) & 0xF;
+
+	return rev;
+}
diff --git a/roms/u-boot/arch/arm/mach-rmobile/cpu_info-rcar.c b/roms/u-boot/arch/arm/mach-rmobile/cpu_info-rcar.c
new file mode 100644
index 000000000..5bde24ae0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/cpu_info-rcar.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c
+ *
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
+ */
+#include <common.h>
+#include <asm/io.h>
+
+#define PRR_MASK		0x7fff
+#define R8A7796_REV_1_0		0x5200
+#define R8A7796_REV_1_1		0x5210
+#define R8A7796_REV_1_3		0x5211
+
+static u32 rmobile_get_prr(void)
+{
+#ifdef CONFIG_RCAR_GEN3
+	return readl(0xFFF00044);
+#else
+	return readl(0xFF000044);
+#endif
+}
+
+u32 rmobile_get_cpu_type(void)
+{
+	return (rmobile_get_prr() & 0x00007F00) >> 8;
+}
+
+u32 rmobile_get_cpu_rev_integer(void)
+{
+	const u32 prr = rmobile_get_prr();
+	const u32 rev = prr & PRR_MASK;
+
+	if (rev == R8A7796_REV_1_1 || rev == R8A7796_REV_1_3)
+		return 1;
+	else
+		return ((prr & 0x000000F0) >> 4) + 1;
+}
+
+u32 rmobile_get_cpu_rev_fraction(void)
+{
+	const u32 prr = rmobile_get_prr();
+	const u32 rev = prr & PRR_MASK;
+
+	if (rev == R8A7796_REV_1_1)
+		return 1;
+	else if (rev == R8A7796_REV_1_3)
+		return 3;
+	else
+		return prr & 0x0000000F;
+}
diff --git a/roms/u-boot/arch/arm/mach-rmobile/cpu_info-rzg.c b/roms/u-boot/arch/arm/mach-rmobile/cpu_info-rzg.c
new file mode 100644
index 000000000..1c18fd06f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/cpu_info-rzg.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ *
+ */
+#include <common.h>
+#include <linux/libfdt.h>
+
+/* If the firmware passed a device tree, use it for soc identification. */
+extern u64 rcar_atf_boot_args[];
+
+/* CPU information table */
+static const struct {
+	char *soc_name;
+	u8 cpu_name[10];
+} tfa_info[] = {
+	{ "renesas,r8a774a1", "R8A774A1" },
+	{ "renesas,r8a774b1", "R8A774B1" },
+	{ "renesas,r8a774c0", "R8A774C0" },
+	{ "renesas,r8a774e1", "R8A774E1" }
+};
+
+const u8 *rzg_get_cpu_name(void)
+{
+	void *atf_fdt_blob = (void *)(rcar_atf_boot_args[1]);
+	bool ret = false;
+	int i;
+
+	if (fdt_magic(atf_fdt_blob) != FDT_MAGIC)
+		return NULL;
+
+	for (i = 0; i < ARRAY_SIZE(tfa_info); i++) {
+		if (fdt_node_check_compatible(atf_fdt_blob, 0,
+					      tfa_info[i].soc_name) == 0) {
+			ret = true;
+			break;
+		}
+	}
+
+	return ret ? tfa_info[i].cpu_name : NULL;
+}
diff --git a/roms/u-boot/arch/arm/mach-rmobile/cpu_info-sh73a0.c b/roms/u-boot/arch/arm/mach-rmobile/cpu_info-sh73a0.c
new file mode 100644
index 000000000..0c7ee8acf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/cpu_info-sh73a0.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ */
+#include <common.h>
+#include <asm/io.h>
+
+u32 rmobile_get_cpu_type(void)
+{
+	u32 id;
+	u32 type;
+	struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
+
+	id = readl(&hpb->cccr);
+	type = (id >> 8) & 0xFF;
+
+	return type;
+}
+
+u32 rmobile_get_cpu_rev_integer(void)
+{
+	u32 id;
+	u32 rev;
+	struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
+
+	id = readl(&hpb->cccr);
+	rev = ((id >> 4) & 0xF) + 1;
+
+	return rev;
+}
+
+u32 rmobile_get_cpu_rev_fraction(void)
+{
+	u32 id;
+	u32 rev;
+	struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
+
+	id = readl(&hpb->cccr);
+	rev = id & 0xF;
+
+	return rev;
+}
diff --git a/roms/u-boot/arch/arm/mach-rmobile/cpu_info.c b/roms/u-boot/arch/arm/mach-rmobile/cpu_info.c
new file mode 100644
index 000000000..9ec622bdb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/cpu_info.c
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012-2021 Renesas Solutions Corp.
+ */
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/cache.h>
+#include <init.h>
+#include <asm/io.h>
+#include <env.h>
+#include <linux/ctype.h>
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+	icache_enable();
+	return 0;
+}
+#endif
+
+/* R-Car Gen3 D-cache is enabled in memmap-gen3.c */
+#ifndef CONFIG_RCAR_GEN3
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+	dcache_enable();
+}
+#endif
+#endif
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+#ifndef CONFIG_RZA1
+__weak const u8 *rzg_get_cpu_name(void)
+{
+	return 0;
+}
+
+static u32 __rmobile_get_cpu_type(void)
+{
+	return 0x0;
+}
+u32 rmobile_get_cpu_type(void)
+		__attribute__((weak, alias("__rmobile_get_cpu_type")));
+
+static u32 __rmobile_get_cpu_rev_integer(void)
+{
+	return 0;
+}
+u32 rmobile_get_cpu_rev_integer(void)
+		__attribute__((weak, alias("__rmobile_get_cpu_rev_integer")));
+
+static u32 __rmobile_get_cpu_rev_fraction(void)
+{
+	return 0;
+}
+u32 rmobile_get_cpu_rev_fraction(void)
+		__attribute__((weak, alias("__rmobile_get_cpu_rev_fraction")));
+
+/* CPU information table */
+static const struct {
+	u16 cpu_type;
+	u8 cpu_name[10];
+} rmobile_cpuinfo[] = {
+	{ RMOBILE_CPU_TYPE_SH73A0, "SH73A0" },
+	{ RMOBILE_CPU_TYPE_R8A7740, "R8A7740" },
+	{ RMOBILE_CPU_TYPE_R8A7790, "R8A7790" },
+	{ RMOBILE_CPU_TYPE_R8A7791, "R8A7791" },
+	{ RMOBILE_CPU_TYPE_R8A7792, "R8A7792" },
+	{ RMOBILE_CPU_TYPE_R8A7793, "R8A7793" },
+	{ RMOBILE_CPU_TYPE_R8A7794, "R8A7794" },
+	{ RMOBILE_CPU_TYPE_R8A7795, "R8A7795" },
+	{ RMOBILE_CPU_TYPE_R8A7796, "R8A7796" },
+	{ RMOBILE_CPU_TYPE_R8A77965, "R8A77965" },
+	{ RMOBILE_CPU_TYPE_R8A77970, "R8A77970" },
+	{ RMOBILE_CPU_TYPE_R8A77980, "R8A77980" },
+	{ RMOBILE_CPU_TYPE_R8A77990, "R8A77990" },
+	{ RMOBILE_CPU_TYPE_R8A77995, "R8A77995" },
+	{ 0x0, "CPU" },
+};
+
+static int rmobile_cpuinfo_idx(void)
+{
+	int i = 0;
+	u32 cpu_type = rmobile_get_cpu_type();
+
+	for (; i < ARRAY_SIZE(rmobile_cpuinfo); i++)
+		if (rmobile_cpuinfo[i].cpu_type == cpu_type)
+			break;
+
+	return i;
+}
+
+static const u8 *get_cpu_name(int idx)
+{
+	const  u8 *cpu_name = rzg_get_cpu_name();
+
+	return cpu_name ? cpu_name : rmobile_cpuinfo[idx].cpu_name;
+}
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+	int i, idx = rmobile_cpuinfo_idx();
+	const u8 *cpu_name = get_cpu_name(idx);
+	char cpu[10] = { 0 };
+
+	for (i = 0; i < sizeof(cpu); i++)
+		cpu[i] = tolower(cpu_name[i]);
+
+	env_set("platform", cpu);
+
+	return 0;
+}
+#endif
+
+int print_cpuinfo(void)
+{
+	int i = rmobile_cpuinfo_idx();
+
+	printf("CPU: Renesas Electronics %s rev %d.%d\n",
+		get_cpu_name(i), rmobile_get_cpu_rev_integer(),
+		rmobile_get_cpu_rev_fraction());
+
+	return 0;
+}
+#else
+int print_cpuinfo(void)
+{
+	printf("CPU: Renesas Electronics RZ/A1\n");
+	return 0;
+}
+#endif
+#endif /* CONFIG_DISPLAY_CPUINFO */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/emac.c b/roms/u-boot/arch/arm/mach-rmobile/emac.c
new file mode 100644
index 000000000..cb9bce0cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/emac.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RMOBILE EtherMAC initialization.
+ *
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ * Copyright (C) 2012  Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ */
+
+#include <common.h>
+#include <net.h>
+#include <linux/errno.h>
+#include <netdev.h>
+
+int cpu_eth_init(struct bd_info *bis)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_SH_ETHER
+	ret = sh_eth_initialize(bis);
+#endif
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/boot0.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/boot0.h
new file mode 100644
index 000000000..1d8c3eea9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/boot0.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Specialty padding for the RCar Gen2 SPL JTAG loading
+ */
+
+#ifndef __BOOT0_H
+#define __BOOT0_H
+
+_start:
+	ARM_VECTORS
+
+#ifdef CONFIG_SPL_BUILD
+	.word	0x0badc0d3;
+	.word	0x0badc0d3;
+	.word	0x0badc0d3;
+	.word	0x0badc0d3;
+	.word	0x0badc0d3;
+	.word	0x0badc0d3;
+	.word	0x0badc0d3;
+	.word	0x0badc0d3;
+#endif
+
+#endif /* __BOOT0_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/ehci-rmobile.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/ehci-rmobile.h
new file mode 100644
index 000000000..ca8c5f370
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/ehci-rmobile.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2013,2014 Renesas Electronics Corporation
+ *  Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ */
+
+#ifndef __EHCI_RMOBILE_H__
+#define __EHCI_RMOBILE_H__
+
+/* Register offset */
+#define OHCI_OFFSET	0x00
+#define OHCI_SIZE	0x1000
+#define EHCI_OFFSET	0x1000
+#define EHCI_SIZE	0x1000
+
+#define EHCI_USBCMD	(EHCI_OFFSET + 0x0020)
+
+/* USBCTR */
+#define DIRPD		(1 << 8)
+#define PLL_RST		(1 << 2)
+#define PCICLK_MASK	(1 << 1)
+#define USBH_RST	(1 << 0)
+
+/* CMND_STS */
+#define SERREN		(1 << 8)
+#define PERREN		(1 << 6)
+#define MASTEREN	(1 << 2)
+#define MEMEN		(1 << 1)
+
+/* PCIAHB_WIN1_CTR and PCIAHB_WIN2_CTR */
+#define PCIAHB_WIN_PREFETCH	((1 << 1)|(1 << 0))
+
+/* AHBPCI_WIN1_CTR */
+#define PCIWIN1_PCICMD		((1 << 3)|(1 << 1))
+#define AHB_CFG_AHBPCI		0x40000000
+#define AHB_CFG_HOST		0x80000000
+
+/* AHBPCI_WIN2_CTR */
+#define PCIWIN2_PCICMD		((1 << 2)|(1 << 1))
+
+/* PCI_INT_ENABLE */
+#define USBH_PMEEN		(1 << 19)
+#define USBH_INTBEN		(1 << 17)
+#define USBH_INTAEN		(1 << 16)
+
+/* AHB_BUS_CTR */
+#define SMODE_READY_CTR		(1 << 17)
+#define SMODE_READ_BURST	(1 << 16)
+#define MMODE_HBUSREQ		(1 << 7)
+#define MMODE_BOUNDARY		((1 << 6)|(1 << 5))
+#define MMODE_BURST_WIDTH	((1 << 4)|(1 << 3))
+#define MMODE_SINGLE_MODE	((1 << 4)|(1 << 3))
+#define MMODE_WR_INCR		(1 << 2)
+#define MMODE_BYTE_BURST	(1 << 1)
+#define MMODE_HTRANS		(1 << 0)
+
+/* PCI_ARBITER_CTR */
+#define PCIBUS_PARK_TIMER       0x00FF0000
+#define PCIBUS_PARK_TIMER_SET   0x00070000
+#define PCIBP_MODE		(1 << 12)
+#define PCIREQ7                 (1 << 7)
+#define PCIREQ6                 (1 << 6)
+#define PCIREQ5                 (1 << 5)
+#define PCIREQ4                 (1 << 4)
+#define PCIREQ3                 (1 << 3)
+#define PCIREQ2                 (1 << 2)
+#define PCIREQ1                 (1 << 1)
+#define PCIREQ0                 (1 << 0)
+
+#define SMSTPCR7        0xE615014C
+#define SMSTPCR703      (1 << 3)
+
+/* Init AHB master and slave functions of the host logic */
+#define AHB_BUS_CTR_INIT \
+	(SMODE_READY_CTR | MMODE_HBUSREQ | MMODE_WR_INCR | \
+	 MMODE_BYTE_BURST | MMODE_HTRANS)
+
+#define USBCTR_WIN_SIZE_1GB	0x800
+
+/* PCI Configuration Registers */
+#define PCI_CONF_OHCI_OFFSET	0x10000
+#define PCI_CONF_EHCI_OFFSET	0x10100
+struct ahb_pciconf {
+	u32 vid_did;
+	u32 cmnd_sts;
+	u32 rev;
+	u32 cache_line;
+	u32 basead;
+};
+
+/* PCI Configuration Registers for AHB-PCI Bridge Registers */
+#define PCI_CONF_AHBPCI_OFFSET	0x10000
+struct ahbconf_pci_bridge {
+	u32 vid_did;		/* 0x00 */
+	u32 cmnd_sts;
+	u32 revid_cc;
+	u32 cls_lt_ht_bist;
+	u32 basead;		/* 0x10 */
+	u32 win1_basead;
+	u32 win2_basead;
+	u32 dummy0[5];
+	u32 ssvdi_ssid;		/* 0x2C */
+	u32 dummy1[4];
+	u32 intr_line_pin;
+};
+
+/* AHB-PCI Bridge PCI Communication Registers */
+#define AHBPCI_OFFSET	0x10800
+struct ahbcom_pci_bridge {
+	u32 pciahb_win1_ctr;	/* 0x00 */
+	u32 pciahb_win2_ctr;
+	u32 pciahb_dct_ctr;
+	u32 dummy0;
+	u32 ahbpci_win1_ctr;	/* 0x10 */
+	u32 ahbpci_win2_ctr;
+	u32 dummy1;
+	u32 ahbpci_dct_ctr;
+	u32 pci_int_enable;	/* 0x20 */
+	u32 pci_int_status;
+	u32 dummy2[2];
+	u32 ahb_bus_ctr;	/* 0x30 */
+	u32 usbctr;
+	u32 dummy3[2];
+	u32 pci_arbiter_ctr;	/* 0x40 */
+	u32 dummy4;
+	u32 pci_unit_rev;	/* 0x48 */
+};
+
+struct rmobile_ehci_reg {
+	u32 hciversion;		/* hciversion/caplength */
+	u32 hcsparams;		/* hcsparams */
+	u32 hccparams;		/* hccparams */
+	u32 hcsp_portroute;	/* hcsp_portroute */
+	u32 usbcmd;		/* usbcmd */
+	u32 usbsts;		/* usbsts */
+	u32 usbintr;		/* usbintr */
+	u32 frindex;		/* frindex */
+	u32 ctrldssegment;	/* ctrldssegment */
+	u32 periodiclistbase;	/* periodiclistbase */
+	u32 asynclistaddr;	/* asynclistaddr */
+	u32 dummy[9];
+	u32 configflag;		/* configflag */
+	u32 portsc;		/* portsc */
+};
+
+#endif /* __EHCI_RMOBILE_H__ */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/gpio.h
new file mode 100644
index 000000000..6b5e4ed4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/gpio.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#if defined(CONFIG_SH73A0)
+#include "sh73a0-gpio.h"
+void sh73a0_pinmux_init(void);
+#elif defined(CONFIG_R8A7740)
+#include "r8a7740-gpio.h"
+void r8a7740_pinmux_init(void);
+#endif
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/irqs.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/irqs.h
new file mode 100644
index 000000000..dcb714f4d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/irqs.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+#define NR_IRQS         1024
+
+/* GIC */
+#define gic_spi(nr)		((nr) + 32)
+
+/* INTCA */
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+
+/* INTCS */
+#define INTCS_VECT_BASE		0x2200
+#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/mmc.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/mmc.h
new file mode 100644
index 000000000..7a0e6f0f7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/mmc.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Renesas SuperH MMCIF driver.
+ *
+ * Copyright (C)  2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C)  2014 Renesas Electronics Corporation
+ */
+#ifndef _RMOBILE_MMC_H_
+#define _RMOBILE_MMC_H_
+
+int mmcif_mmc_init(void);
+
+#endif /* _RMOBILE_MMC_H_ */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7740-gpio.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7740-gpio.h
new file mode 100644
index 000000000..125b3b4ff
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7740-gpio.h
@@ -0,0 +1,572 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+
+#ifndef __ASM_R8A7740_H__
+#define __ASM_R8A7740_H__
+
+/*
+ * MD_CKx pin
+ */
+#define MD_CK2	(1 << 2)
+#define MD_CK1	(1 << 1)
+#define MD_CK0	(1 << 0)
+
+/*
+ * Pin Function Controller:
+ *	GPIO_FN_xx - GPIO used to select pin function
+ *	GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PORT */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+	GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211,
+
+	/* IRQ */
+	GPIO_FN_IRQ0_PORT2,	GPIO_FN_IRQ0_PORT13,
+	GPIO_FN_IRQ1,
+	GPIO_FN_IRQ2_PORT11,	GPIO_FN_IRQ2_PORT12,
+	GPIO_FN_IRQ3_PORT10,	GPIO_FN_IRQ3_PORT14,
+	GPIO_FN_IRQ4_PORT15,	GPIO_FN_IRQ4_PORT172,
+	GPIO_FN_IRQ5_PORT0,	GPIO_FN_IRQ5_PORT1,
+	GPIO_FN_IRQ6_PORT121,	GPIO_FN_IRQ6_PORT173,
+	GPIO_FN_IRQ7_PORT120,	GPIO_FN_IRQ7_PORT209,
+	GPIO_FN_IRQ8,
+	GPIO_FN_IRQ9_PORT118,	GPIO_FN_IRQ9_PORT210,
+	GPIO_FN_IRQ10,
+	GPIO_FN_IRQ11,
+	GPIO_FN_IRQ12_PORT42,	GPIO_FN_IRQ12_PORT97,
+	GPIO_FN_IRQ13_PORT64,	GPIO_FN_IRQ13_PORT98,
+	GPIO_FN_IRQ14_PORT63,	GPIO_FN_IRQ14_PORT99,
+	GPIO_FN_IRQ15_PORT62,	GPIO_FN_IRQ15_PORT100,
+	GPIO_FN_IRQ16_PORT68,	GPIO_FN_IRQ16_PORT211,
+	GPIO_FN_IRQ17,
+	GPIO_FN_IRQ18,
+	GPIO_FN_IRQ19,
+	GPIO_FN_IRQ20,
+	GPIO_FN_IRQ21,
+	GPIO_FN_IRQ22,
+	GPIO_FN_IRQ23,
+	GPIO_FN_IRQ24,
+	GPIO_FN_IRQ25,
+	GPIO_FN_IRQ26_PORT58,	GPIO_FN_IRQ26_PORT81,
+	GPIO_FN_IRQ27_PORT57,	GPIO_FN_IRQ27_PORT168,
+	GPIO_FN_IRQ28_PORT56,	GPIO_FN_IRQ28_PORT169,
+	GPIO_FN_IRQ29_PORT50,	GPIO_FN_IRQ29_PORT170,
+	GPIO_FN_IRQ30_PORT49,	GPIO_FN_IRQ30_PORT171,
+	GPIO_FN_IRQ31_PORT41,	GPIO_FN_IRQ31_PORT167,
+
+	/* Function */
+
+	/* DBGT */
+	GPIO_FN_DBGMDT2,	GPIO_FN_DBGMDT1,	GPIO_FN_DBGMDT0,
+	GPIO_FN_DBGMD10,	GPIO_FN_DBGMD11,	GPIO_FN_DBGMD20,
+	GPIO_FN_DBGMD21,
+
+	/* FSI */
+	GPIO_FN_FSIAISLD_PORT0,		/* FSIAISLD Port 0/5 */
+	GPIO_FN_FSIAISLD_PORT5,
+	GPIO_FN_FSIASPDIF_PORT9,	/* FSIASPDIF Port 9/18 */
+	GPIO_FN_FSIASPDIF_PORT18,
+	GPIO_FN_FSIAOSLD1,	GPIO_FN_FSIAOSLD2,
+	GPIO_FN_FSIAOLR,	GPIO_FN_FSIAOBT,
+	GPIO_FN_FSIAOSLD,	GPIO_FN_FSIAOMC,
+	GPIO_FN_FSIACK,		GPIO_FN_FSIAILR,
+	GPIO_FN_FSIAIBT,
+
+	/* FMSI */
+	GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */
+	GPIO_FN_FMSISLD_PORT6,
+	GPIO_FN_FMSIILR,	GPIO_FN_FMSIIBT,
+	GPIO_FN_FMSIOLR,	GPIO_FN_FMSIOBT,
+	GPIO_FN_FMSICK,		GPIO_FN_FMSOILR,
+	GPIO_FN_FMSOIBT,	GPIO_FN_FMSOOLR,
+	GPIO_FN_FMSOOBT,	GPIO_FN_FMSOSLD,
+	GPIO_FN_FMSOCK,
+
+	/* SCIFA0 */
+	GPIO_FN_SCIFA0_SCK,	GPIO_FN_SCIFA0_CTS,
+	GPIO_FN_SCIFA0_RTS,	GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_SCIFA0_TXD,
+
+	/* SCIFA1 */
+	GPIO_FN_SCIFA1_CTS,	GPIO_FN_SCIFA1_SCK,
+	GPIO_FN_SCIFA1_RXD,	GPIO_FN_SCIFA1_TXD,
+	GPIO_FN_SCIFA1_RTS,
+
+	/* SCIFA2 */
+	GPIO_FN_SCIFA2_SCK_PORT22, /* SCIFA2_SCK Port 22/199 */
+	GPIO_FN_SCIFA2_SCK_PORT199,
+	GPIO_FN_SCIFA2_RXD,	GPIO_FN_SCIFA2_TXD,
+	GPIO_FN_SCIFA2_CTS,	GPIO_FN_SCIFA2_RTS,
+
+	/* SCIFA3 */
+	GPIO_FN_SCIFA3_RTS_PORT105, /* MSEL5CR_8_0 */
+	GPIO_FN_SCIFA3_SCK_PORT116,
+	GPIO_FN_SCIFA3_CTS_PORT117,
+	GPIO_FN_SCIFA3_RXD_PORT174,
+	GPIO_FN_SCIFA3_TXD_PORT175,
+
+	GPIO_FN_SCIFA3_RTS_PORT161, /* MSEL5CR_8_1 */
+	GPIO_FN_SCIFA3_SCK_PORT158,
+	GPIO_FN_SCIFA3_CTS_PORT162,
+	GPIO_FN_SCIFA3_RXD_PORT159,
+	GPIO_FN_SCIFA3_TXD_PORT160,
+
+	/* SCIFA4 */
+	GPIO_FN_SCIFA4_RXD_PORT12, /* MSEL5CR[12:11] = 00 */
+	GPIO_FN_SCIFA4_TXD_PORT13,
+
+	GPIO_FN_SCIFA4_RXD_PORT204, /* MSEL5CR[12:11] = 01 */
+	GPIO_FN_SCIFA4_TXD_PORT203,
+
+	GPIO_FN_SCIFA4_RXD_PORT94, /* MSEL5CR[12:11] = 10 */
+	GPIO_FN_SCIFA4_TXD_PORT93,
+
+	GPIO_FN_SCIFA4_SCK_PORT21, /* SCIFA4_SCK Port 21/205 */
+	GPIO_FN_SCIFA4_SCK_PORT205,
+
+	/* SCIFA5 */
+	GPIO_FN_SCIFA5_TXD_PORT20, /* MSEL5CR[15:14] = 00 */
+	GPIO_FN_SCIFA5_RXD_PORT10,
+
+	GPIO_FN_SCIFA5_RXD_PORT207, /* MSEL5CR[15:14] = 01 */
+	GPIO_FN_SCIFA5_TXD_PORT208,
+
+	GPIO_FN_SCIFA5_TXD_PORT91, /* MSEL5CR[15:14] = 10 */
+	GPIO_FN_SCIFA5_RXD_PORT92,
+
+	GPIO_FN_SCIFA5_SCK_PORT23, /* SCIFA5_SCK Port 23/206 */
+	GPIO_FN_SCIFA5_SCK_PORT206,
+
+	/* SCIFA6 */
+	GPIO_FN_SCIFA6_SCK,	GPIO_FN_SCIFA6_RXD,	GPIO_FN_SCIFA6_TXD,
+
+	/* SCIFA7 */
+	GPIO_FN_SCIFA7_TXD,	GPIO_FN_SCIFA7_RXD,
+
+	/* SCIFAB */
+	GPIO_FN_SCIFB_SCK_PORT190, /* MSEL5CR_17_0 */
+	GPIO_FN_SCIFB_RXD_PORT191,
+	GPIO_FN_SCIFB_TXD_PORT192,
+	GPIO_FN_SCIFB_RTS_PORT186,
+	GPIO_FN_SCIFB_CTS_PORT187,
+
+	GPIO_FN_SCIFB_SCK_PORT2, /* MSEL5CR_17_1 */
+	GPIO_FN_SCIFB_RXD_PORT3,
+	GPIO_FN_SCIFB_TXD_PORT4,
+	GPIO_FN_SCIFB_RTS_PORT172,
+	GPIO_FN_SCIFB_CTS_PORT173,
+
+	/* LCD0 */
+	GPIO_FN_LCDC0_SELECT,
+	GPIO_FN_LCD0_D0,	GPIO_FN_LCD0_D1,	GPIO_FN_LCD0_D2,
+	GPIO_FN_LCD0_D3,	GPIO_FN_LCD0_D4,	GPIO_FN_LCD0_D5,
+	GPIO_FN_LCD0_D6,	GPIO_FN_LCD0_D7,	GPIO_FN_LCD0_D8,
+	GPIO_FN_LCD0_D9,	GPIO_FN_LCD0_D10,	GPIO_FN_LCD0_D11,
+	GPIO_FN_LCD0_D12,	GPIO_FN_LCD0_D13,	GPIO_FN_LCD0_D14,
+	GPIO_FN_LCD0_D15,	GPIO_FN_LCD0_D16,	GPIO_FN_LCD0_D17,
+	GPIO_FN_LCD0_DON,	GPIO_FN_LCD0_VCPWC,	GPIO_FN_LCD0_VEPWC,
+
+	GPIO_FN_LCD0_DCK,	GPIO_FN_LCD0_VSYN, /* for RGB */
+	GPIO_FN_LCD0_HSYN,	GPIO_FN_LCD0_DISP, /* for RGB */
+
+	GPIO_FN_LCD0_WR,	GPIO_FN_LCD0_RD, /* for SYS */
+	GPIO_FN_LCD0_CS,	GPIO_FN_LCD0_RS, /* for SYS */
+
+	GPIO_FN_LCD0_D18_PORT163,	GPIO_FN_LCD0_D19_PORT162,
+	GPIO_FN_LCD0_D20_PORT161,	GPIO_FN_LCD0_D21_PORT158,
+	GPIO_FN_LCD0_D22_PORT160,	GPIO_FN_LCD0_D23_PORT159,
+	GPIO_FN_LCD0_LCLK_PORT165,	 /* MSEL5CR_6_1 */
+
+	GPIO_FN_LCD0_D18_PORT40,	GPIO_FN_LCD0_D19_PORT4,
+	GPIO_FN_LCD0_D20_PORT3,		GPIO_FN_LCD0_D21_PORT2,
+	GPIO_FN_LCD0_D22_PORT0,		GPIO_FN_LCD0_D23_PORT1,
+	GPIO_FN_LCD0_LCLK_PORT102,	/* MSEL5CR_6_0 */
+
+	/* LCD1 */
+	GPIO_FN_LCDC1_SELECT,
+	GPIO_FN_LCD1_D0,	GPIO_FN_LCD1_D1,	GPIO_FN_LCD1_D2,
+	GPIO_FN_LCD1_D3,	GPIO_FN_LCD1_D4,	GPIO_FN_LCD1_D5,
+	GPIO_FN_LCD1_D6,	GPIO_FN_LCD1_D7,	GPIO_FN_LCD1_D8,
+	GPIO_FN_LCD1_D9,	GPIO_FN_LCD1_D10,	GPIO_FN_LCD1_D11,
+	GPIO_FN_LCD1_D12,	GPIO_FN_LCD1_D13,	GPIO_FN_LCD1_D14,
+	GPIO_FN_LCD1_D15,	GPIO_FN_LCD1_D16,	GPIO_FN_LCD1_D17,
+	GPIO_FN_LCD1_D18,	GPIO_FN_LCD1_D19,	GPIO_FN_LCD1_D20,
+	GPIO_FN_LCD1_D21,	GPIO_FN_LCD1_D22,	GPIO_FN_LCD1_D23,
+	GPIO_FN_LCD1_DON,	GPIO_FN_LCD1_VCPWC,
+	GPIO_FN_LCD1_LCLK,	GPIO_FN_LCD1_VEPWC,
+
+	GPIO_FN_LCD1_DCK,	GPIO_FN_LCD1_VSYN, /* for RGB */
+	GPIO_FN_LCD1_HSYN,	GPIO_FN_LCD1_DISP, /* for RGB */
+
+	GPIO_FN_LCD1_WR,	GPIO_FN_LCD1_RD, /* for SYS */
+	GPIO_FN_LCD1_CS,	GPIO_FN_LCD1_RS, /* for SYS */
+
+	/* RSPI */
+	GPIO_FN_RSPI_SSL0_A,	GPIO_FN_RSPI_SSL1_A,
+	GPIO_FN_RSPI_SSL2_A,	GPIO_FN_RSPI_SSL3_A,
+	GPIO_FN_RSPI_MOSI_A,	GPIO_FN_RSPI_MISO_A,
+	GPIO_FN_RSPI_CK_A,
+
+	/* VIO CKO */
+	GPIO_FN_VIO_CKO1,
+	GPIO_FN_VIO_CKO2,
+	GPIO_FN_VIO_CKO_1,
+	GPIO_FN_VIO_CKO,
+
+	/* VIO0 */
+	GPIO_FN_VIO0_D0,	GPIO_FN_VIO0_D1,	GPIO_FN_VIO0_D2,
+	GPIO_FN_VIO0_D3,	GPIO_FN_VIO0_D4,	GPIO_FN_VIO0_D5,
+	GPIO_FN_VIO0_D6,	GPIO_FN_VIO0_D7,	GPIO_FN_VIO0_D8,
+	GPIO_FN_VIO0_D9,	GPIO_FN_VIO0_D10,	GPIO_FN_VIO0_D11,
+	GPIO_FN_VIO0_D12,	GPIO_FN_VIO0_VD,	GPIO_FN_VIO0_HD,
+	GPIO_FN_VIO0_CLK,	GPIO_FN_VIO0_FIELD,
+
+	GPIO_FN_VIO0_D13_PORT26, /* MSEL5CR_27_0 */
+	GPIO_FN_VIO0_D14_PORT25,
+	GPIO_FN_VIO0_D15_PORT24,
+
+	GPIO_FN_VIO0_D13_PORT22, /* MSEL5CR_27_1 */
+	GPIO_FN_VIO0_D14_PORT95,
+	GPIO_FN_VIO0_D15_PORT96,
+
+	/* VIO1 */
+	GPIO_FN_VIO1_D0,	GPIO_FN_VIO1_D1,	GPIO_FN_VIO1_D2,
+	GPIO_FN_VIO1_D3,	GPIO_FN_VIO1_D4,	GPIO_FN_VIO1_D5,
+	GPIO_FN_VIO1_D6,	GPIO_FN_VIO1_D7,	GPIO_FN_VIO1_VD,
+	GPIO_FN_VIO1_HD,	GPIO_FN_VIO1_CLK,	GPIO_FN_VIO1_FIELD,
+
+	/* TPU0 */
+	GPIO_FN_TPU0TO0,	GPIO_FN_TPU0TO1,
+	GPIO_FN_TPU0TO3,
+	GPIO_FN_TPU0TO2_PORT66, /* TPU0TO2 Port 66/202 */
+	GPIO_FN_TPU0TO2_PORT202,
+
+	/* SSP1 0 */
+	GPIO_FN_STP0_IPD0,	GPIO_FN_STP0_IPD1,	GPIO_FN_STP0_IPD2,
+	GPIO_FN_STP0_IPD3,	GPIO_FN_STP0_IPD4,	GPIO_FN_STP0_IPD5,
+	GPIO_FN_STP0_IPD6,	GPIO_FN_STP0_IPD7,	GPIO_FN_STP0_IPEN,
+	GPIO_FN_STP0_IPCLK,	GPIO_FN_STP0_IPSYNC,
+
+	/* SSP1 1 */
+	GPIO_FN_STP1_IPD1,	GPIO_FN_STP1_IPD2,	GPIO_FN_STP1_IPD3,
+	GPIO_FN_STP1_IPD4,	GPIO_FN_STP1_IPD5,	GPIO_FN_STP1_IPD6,
+	GPIO_FN_STP1_IPD7,	GPIO_FN_STP1_IPCLK,	GPIO_FN_STP1_IPSYNC,
+
+	GPIO_FN_STP1_IPD0_PORT186, /* MSEL5CR_23_0 */
+	GPIO_FN_STP1_IPEN_PORT187,
+
+	GPIO_FN_STP1_IPD0_PORT194, /* MSEL5CR_23_1 */
+	GPIO_FN_STP1_IPEN_PORT193,
+
+	/* SIM */
+	GPIO_FN_SIM_RST,	GPIO_FN_SIM_CLK,
+	GPIO_FN_SIM_D_PORT22, /* SIM_D  Port 22/199 */
+	GPIO_FN_SIM_D_PORT199,
+
+	/* SDHI0 */
+	GPIO_FN_SDHI0_D0,	GPIO_FN_SDHI0_D1,	GPIO_FN_SDHI0_D2,
+	GPIO_FN_SDHI0_D3,	GPIO_FN_SDHI0_CD,	GPIO_FN_SDHI0_WP,
+	GPIO_FN_SDHI0_CMD,	GPIO_FN_SDHI0_CLK,
+
+	/* SDHI1 */
+	GPIO_FN_SDHI1_D0,	GPIO_FN_SDHI1_D1,	GPIO_FN_SDHI1_D2,
+	GPIO_FN_SDHI1_D3,	GPIO_FN_SDHI1_CD,	GPIO_FN_SDHI1_WP,
+	GPIO_FN_SDHI1_CMD,	GPIO_FN_SDHI1_CLK,
+
+	/* SDHI2 */
+	GPIO_FN_SDHI2_D0,	GPIO_FN_SDHI2_D1,	GPIO_FN_SDHI2_D2,
+	GPIO_FN_SDHI2_D3,	GPIO_FN_SDHI2_CLK,	GPIO_FN_SDHI2_CMD,
+
+	GPIO_FN_SDHI2_CD_PORT24, /* MSEL5CR_19_0 */
+	GPIO_FN_SDHI2_WP_PORT25,
+
+	GPIO_FN_SDHI2_WP_PORT177, /* MSEL5CR_19_1 */
+	GPIO_FN_SDHI2_CD_PORT202,
+
+	/* MSIOF2 */
+	GPIO_FN_MSIOF2_TXD,	GPIO_FN_MSIOF2_RXD,	GPIO_FN_MSIOF2_TSCK,
+	GPIO_FN_MSIOF2_SS2,	GPIO_FN_MSIOF2_TSYNC,	GPIO_FN_MSIOF2_SS1,
+	GPIO_FN_MSIOF2_MCK1,	GPIO_FN_MSIOF2_MCK0,	GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_MSIOF2_RSCK,
+
+	/* KEYSC */
+	GPIO_FN_KEYIN4,		GPIO_FN_KEYIN5,
+	GPIO_FN_KEYIN6,		GPIO_FN_KEYIN7,
+	GPIO_FN_KEYOUT0,	GPIO_FN_KEYOUT1,	GPIO_FN_KEYOUT2,
+	GPIO_FN_KEYOUT3,	GPIO_FN_KEYOUT4,	GPIO_FN_KEYOUT5,
+	GPIO_FN_KEYOUT6,	GPIO_FN_KEYOUT7,
+
+	GPIO_FN_KEYIN0_PORT43, /* MSEL4CR_18_0 */
+	GPIO_FN_KEYIN1_PORT44,
+	GPIO_FN_KEYIN2_PORT45,
+	GPIO_FN_KEYIN3_PORT46,
+
+	GPIO_FN_KEYIN0_PORT58, /* MSEL4CR_18_1 */
+	GPIO_FN_KEYIN1_PORT57,
+	GPIO_FN_KEYIN2_PORT56,
+	GPIO_FN_KEYIN3_PORT55,
+
+	/* VOU */
+	GPIO_FN_DV_D0,	GPIO_FN_DV_D1,	GPIO_FN_DV_D2,	GPIO_FN_DV_D3,
+	GPIO_FN_DV_D4,	GPIO_FN_DV_D5,	GPIO_FN_DV_D6,	GPIO_FN_DV_D7,
+	GPIO_FN_DV_D8,	GPIO_FN_DV_D9,	GPIO_FN_DV_D10,	GPIO_FN_DV_D11,
+	GPIO_FN_DV_D12,	GPIO_FN_DV_D13,	GPIO_FN_DV_D14,	GPIO_FN_DV_D15,
+	GPIO_FN_DV_CLK,
+	GPIO_FN_DV_VSYNC,
+	GPIO_FN_DV_HSYNC,
+
+	/* MEMC */
+	GPIO_FN_MEMC_AD0,	GPIO_FN_MEMC_AD1,	GPIO_FN_MEMC_AD2,
+	GPIO_FN_MEMC_AD3,	GPIO_FN_MEMC_AD4,	GPIO_FN_MEMC_AD5,
+	GPIO_FN_MEMC_AD6,	GPIO_FN_MEMC_AD7,	GPIO_FN_MEMC_AD8,
+	GPIO_FN_MEMC_AD9,	GPIO_FN_MEMC_AD10,	GPIO_FN_MEMC_AD11,
+	GPIO_FN_MEMC_AD12,	GPIO_FN_MEMC_AD13,	GPIO_FN_MEMC_AD14,
+	GPIO_FN_MEMC_AD15,	GPIO_FN_MEMC_CS0,	GPIO_FN_MEMC_INT,
+	GPIO_FN_MEMC_NWE,	GPIO_FN_MEMC_NOE,
+
+	GPIO_FN_MEMC_CS1, /* MSEL4CR_6_0 */
+	GPIO_FN_MEMC_ADV,
+	GPIO_FN_MEMC_WAIT,
+	GPIO_FN_MEMC_BUSCLK,
+
+	GPIO_FN_MEMC_A1, /* MSEL4CR_6_1 */
+	GPIO_FN_MEMC_DREQ0,
+	GPIO_FN_MEMC_DREQ1,
+	GPIO_FN_MEMC_A0,
+
+	/* MMC */
+	GPIO_FN_MMC0_D0_PORT68,		GPIO_FN_MMC0_D1_PORT69,
+	GPIO_FN_MMC0_D2_PORT70,		GPIO_FN_MMC0_D3_PORT71,
+	GPIO_FN_MMC0_D4_PORT72,		GPIO_FN_MMC0_D5_PORT73,
+	GPIO_FN_MMC0_D6_PORT74,		GPIO_FN_MMC0_D7_PORT75,
+	GPIO_FN_MMC0_CLK_PORT66,
+	GPIO_FN_MMC0_CMD_PORT67,	/* MSEL4CR_15_0 */
+
+	GPIO_FN_MMC1_D0_PORT149,	GPIO_FN_MMC1_D1_PORT148,
+	GPIO_FN_MMC1_D2_PORT147,	GPIO_FN_MMC1_D3_PORT146,
+	GPIO_FN_MMC1_D4_PORT145,	GPIO_FN_MMC1_D5_PORT144,
+	GPIO_FN_MMC1_D6_PORT143,	GPIO_FN_MMC1_D7_PORT142,
+	GPIO_FN_MMC1_CLK_PORT103,
+	GPIO_FN_MMC1_CMD_PORT104,	/* MSEL4CR_15_1 */
+
+	/* MSIOF0 */
+	GPIO_FN_MSIOF0_SS1,	GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_MSIOF0_RXD,	GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_MSIOF0_MCK0,	GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_MSIOF0_RSYNC,	GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_MSIOF0_TSCK,	GPIO_FN_MSIOF0_TSYNC,
+
+	/* MSIOF1 */
+	GPIO_FN_MSIOF1_RSCK,	GPIO_FN_MSIOF1_RSYNC,
+	GPIO_FN_MSIOF1_MCK0,	GPIO_FN_MSIOF1_MCK1,
+
+	GPIO_FN_MSIOF1_SS2_PORT116,	GPIO_FN_MSIOF1_SS1_PORT117,
+	GPIO_FN_MSIOF1_RXD_PORT118,	GPIO_FN_MSIOF1_TXD_PORT119,
+	GPIO_FN_MSIOF1_TSYNC_PORT120,
+	GPIO_FN_MSIOF1_TSCK_PORT121,	/* MSEL4CR_10_0 */
+
+	GPIO_FN_MSIOF1_SS1_PORT67,	GPIO_FN_MSIOF1_TSCK_PORT72,
+	GPIO_FN_MSIOF1_TSYNC_PORT73,	GPIO_FN_MSIOF1_TXD_PORT74,
+	GPIO_FN_MSIOF1_RXD_PORT75,
+	GPIO_FN_MSIOF1_SS2_PORT202,	/* MSEL4CR_10_1 */
+
+	/* GPIO */
+	GPIO_FN_GPO0,	GPIO_FN_GPI0,
+	GPIO_FN_GPO1,	GPIO_FN_GPI1,
+
+	/* USB0 */
+	GPIO_FN_USB0_OCI,	GPIO_FN_USB0_PPON,	GPIO_FN_VBUS,
+
+	/* USB1 */
+	GPIO_FN_USB1_OCI,	GPIO_FN_USB1_PPON,
+
+	/* BBIF1 */
+	GPIO_FN_BBIF1_RXD,	GPIO_FN_BBIF1_TXD,	GPIO_FN_BBIF1_TSYNC,
+	GPIO_FN_BBIF1_TSCK,	GPIO_FN_BBIF1_RSCK,	GPIO_FN_BBIF1_RSYNC,
+	GPIO_FN_BBIF1_FLOW,	GPIO_FN_BBIF1_RX_FLOW_N,
+
+	/* BBIF2 */
+	GPIO_FN_BBIF2_TXD2_PORT5, /* MSEL5CR_0_0 */
+	GPIO_FN_BBIF2_RXD2_PORT60,
+	GPIO_FN_BBIF2_TSYNC2_PORT6,
+	GPIO_FN_BBIF2_TSCK2_PORT59,
+
+	GPIO_FN_BBIF2_RXD2_PORT90, /* MSEL5CR_0_1 */
+	GPIO_FN_BBIF2_TXD2_PORT183,
+	GPIO_FN_BBIF2_TSCK2_PORT89,
+	GPIO_FN_BBIF2_TSYNC2_PORT184,
+
+	/* BSC / FLCTL / PCMCIA */
+	GPIO_FN_CS0,	GPIO_FN_CS2,	GPIO_FN_CS4,
+	GPIO_FN_CS5B,	GPIO_FN_CS6A,
+	GPIO_FN_CS5A_PORT105, /* CS5A PORT 19/105 */
+	GPIO_FN_CS5A_PORT19,
+	GPIO_FN_IOIS16, /* ? */
+
+	GPIO_FN_A0,	GPIO_FN_A1,	GPIO_FN_A2,	GPIO_FN_A3,
+	GPIO_FN_A4_FOE,		/* share with FLCTL */
+	GPIO_FN_A5_FCDE,	/* share with FLCTL */
+	GPIO_FN_A6,	GPIO_FN_A7,	GPIO_FN_A8,	GPIO_FN_A9,
+	GPIO_FN_A10,	GPIO_FN_A11,	GPIO_FN_A12,	GPIO_FN_A13,
+	GPIO_FN_A14,	GPIO_FN_A15,	GPIO_FN_A16,	GPIO_FN_A17,
+	GPIO_FN_A18,	GPIO_FN_A19,	GPIO_FN_A20,	GPIO_FN_A21,
+	GPIO_FN_A22,	GPIO_FN_A23,	GPIO_FN_A24,	GPIO_FN_A25,
+	GPIO_FN_A26,
+
+	GPIO_FN_D0_NAF0,	GPIO_FN_D1_NAF1,	/* share with FLCTL */
+	GPIO_FN_D2_NAF2,	GPIO_FN_D3_NAF3,	/* share with FLCTL */
+	GPIO_FN_D4_NAF4,	GPIO_FN_D5_NAF5,	/* share with FLCTL */
+	GPIO_FN_D6_NAF6,	GPIO_FN_D7_NAF7,	/* share with FLCTL */
+	GPIO_FN_D8_NAF8,	GPIO_FN_D9_NAF9,	/* share with FLCTL */
+	GPIO_FN_D10_NAF10,	GPIO_FN_D11_NAF11,	/* share with FLCTL */
+	GPIO_FN_D12_NAF12,	GPIO_FN_D13_NAF13,	/* share with FLCTL */
+	GPIO_FN_D14_NAF14,	GPIO_FN_D15_NAF15,	/* share with FLCTL */
+
+	GPIO_FN_D16,	GPIO_FN_D17,	GPIO_FN_D18,	GPIO_FN_D19,
+	GPIO_FN_D20,	GPIO_FN_D21,	GPIO_FN_D22,	GPIO_FN_D23,
+	GPIO_FN_D24,	GPIO_FN_D25,	GPIO_FN_D26,	GPIO_FN_D27,
+	GPIO_FN_D28,	GPIO_FN_D29,	GPIO_FN_D30,	GPIO_FN_D31,
+
+	GPIO_FN_WE0_FWE,	/* share with FLCTL */
+	GPIO_FN_WE1,
+	GPIO_FN_WE2_ICIORD,	/* share with PCMCIA */
+	GPIO_FN_WE3_ICIOWR,	/* share with PCMCIA */
+	GPIO_FN_CKO,	GPIO_FN_BS,	GPIO_FN_RDWR,
+	GPIO_FN_RD_FSC,		/* share with FLCTL */
+	GPIO_FN_WAIT_PORT177,	/* WAIT Port 90/177 */
+	GPIO_FN_WAIT_PORT90,
+
+	GPIO_FN_FCE0,	GPIO_FN_FCE1,	GPIO_FN_FRB, /* FLCTL */
+
+	/* IRDA */
+	GPIO_FN_IRDA_FIRSEL,	GPIO_FN_IRDA_IN,	GPIO_FN_IRDA_OUT,
+
+	/* ATAPI */
+	GPIO_FN_IDE_D0,		GPIO_FN_IDE_D1,		GPIO_FN_IDE_D2,
+	GPIO_FN_IDE_D3,		GPIO_FN_IDE_D4,		GPIO_FN_IDE_D5,
+	GPIO_FN_IDE_D6,		GPIO_FN_IDE_D7,		GPIO_FN_IDE_D8,
+	GPIO_FN_IDE_D9,		GPIO_FN_IDE_D10,	GPIO_FN_IDE_D11,
+	GPIO_FN_IDE_D12,	GPIO_FN_IDE_D13,	GPIO_FN_IDE_D14,
+	GPIO_FN_IDE_D15,	GPIO_FN_IDE_A0,		GPIO_FN_IDE_A1,
+	GPIO_FN_IDE_A2,		GPIO_FN_IDE_CS0,	GPIO_FN_IDE_CS1,
+	GPIO_FN_IDE_IOWR,	GPIO_FN_IDE_IORD,	GPIO_FN_IDE_IORDY,
+	GPIO_FN_IDE_INT,	GPIO_FN_IDE_RST,	GPIO_FN_IDE_DIRECTION,
+	GPIO_FN_IDE_EXBUF_ENB,	GPIO_FN_IDE_IODACK,	GPIO_FN_IDE_IODREQ,
+
+	/* RMII */
+	GPIO_FN_RMII_CRS_DV,	GPIO_FN_RMII_RX_ER,	GPIO_FN_RMII_RXD0,
+	GPIO_FN_RMII_RXD1,	GPIO_FN_RMII_TX_EN,	GPIO_FN_RMII_TXD0,
+	GPIO_FN_RMII_MDC,	GPIO_FN_RMII_TXD1,	GPIO_FN_RMII_MDIO,
+	GPIO_FN_RMII_REF50CK,	/* for RMII */
+	GPIO_FN_RMII_REF125CK,	/* for GMII */
+
+	/* GEther */
+	GPIO_FN_ET_TX_CLK,	GPIO_FN_ET_TX_EN,	GPIO_FN_ET_ETXD0,
+	GPIO_FN_ET_ETXD1,	GPIO_FN_ET_ETXD2,	GPIO_FN_ET_ETXD3,
+	GPIO_FN_ET_ETXD4,	GPIO_FN_ET_ETXD5, /* for GEther */
+	GPIO_FN_ET_ETXD6,	GPIO_FN_ET_ETXD7, /* for GEther */
+	GPIO_FN_ET_COL,		GPIO_FN_ET_TX_ER,
+	GPIO_FN_ET_RX_CLK,	GPIO_FN_ET_RX_DV,
+	GPIO_FN_ET_ERXD0,	GPIO_FN_ET_ERXD1,
+	GPIO_FN_ET_ERXD2,	GPIO_FN_ET_ERXD3,
+	GPIO_FN_ET_ERXD4,	GPIO_FN_ET_ERXD5, /* for GEther */
+	GPIO_FN_ET_ERXD6,	GPIO_FN_ET_ERXD7, /* for GEther */
+	GPIO_FN_ET_RX_ER,	GPIO_FN_ET_CRS,
+	GPIO_FN_ET_MDC,		GPIO_FN_ET_MDIO,
+	GPIO_FN_ET_LINK,	GPIO_FN_ET_PHY_INT,
+	GPIO_FN_ET_WOL,		GPIO_FN_ET_GTX_CLK,
+
+	/* DMA0 */
+	GPIO_FN_DREQ0,		GPIO_FN_DACK0,
+
+	/* DMA1 */
+	GPIO_FN_DREQ1,		GPIO_FN_DACK1,
+
+	/* SYSC */
+	GPIO_FN_RESETOUTS,
+	GPIO_FN_RESETP_PULLUP,
+	GPIO_FN_RESETP_PLAIN,
+
+	/* SDENC */
+	GPIO_FN_SDENC_CPG,
+	GPIO_FN_SDENC_DV_CLKI,
+
+	/* IRREM */
+	GPIO_FN_IROUT,
+
+	/* DEBUG */
+	GPIO_FN_EDEBGREQ_PULLDOWN,
+	GPIO_FN_EDEBGREQ_PULLUP,
+
+	GPIO_FN_TRACEAUD_FROM_VIO,
+	GPIO_FN_TRACEAUD_FROM_LCDC0,
+	GPIO_FN_TRACEAUD_FROM_MEMC,
+};
+
+#endif /* __ASM_R8A7740_H__ */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7740.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7740.h
new file mode 100644
index 000000000..f1fcfe19e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7740.h
@@ -0,0 +1,274 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+#ifndef __ASM_ARCH_R8A7740_H
+#define __ASM_ARCH_R8A7740_H
+
+/*
+ * R8A7740 I/O Addresses
+ */
+
+#define MERAM_BASE	0xE5580000
+#define DDRP_BASE	0xC12A0000
+#define HPB_BASE	0xE6000000
+#define RWDT0_BASE	0xE6020000
+#define RWDT1_BASE	0xE6030000
+#define GPIO_BASE	0xE6050000
+#define CMT1_BASE	0xE6138000
+#define CPG_BASE	0xE6150000
+#define SYSC_BASE	0xE6180000
+#define SDHI0_BASE	0xE6850000
+#define SDHI1_BASE	0xE6860000
+#define MMCIF_BASE	0xE6BD0000
+#define SCIF5_BASE	0xE6CB0000
+#define SCIF6_BASE	0xE6CC0000
+#define DBSC_BASE	0xFE400000
+#define BSC_BASE	0xFEC10000
+#define I2C0_BASE	0xFFF20000
+#define I2C1_BASE	0xE6C20000
+#define TMU_BASE	0xFFF80000
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct r8a7740_rwdt {
+	u16 rwtcnt0;	/* 0x00 */
+	u16 dummy0;		/* 0x02 */
+	u16 rwtcsra0;	/* 0x04 */
+	u16 dummy1;		/* 0x06 */
+	u16 rwtcsrb0;	/* 0x08 */
+	u16 dummy2;		/* 0x0A */
+};
+
+/* HPB Semaphore Control Registers */
+struct r8a7740_hpb {
+	u32 hpbctrl0;
+	u32 hpbctrl1;
+	u32 hpbctrl2;
+	u32 cccr;
+	u32 dummy0; /* 0x20 */
+	u32 hpbctrl4;
+	u32 hpbctrl5;
+};
+
+/* CPG */
+struct r8a7740_cpg {
+	u32 frqcra;
+	u32 frqcrb;
+	u32 vclkcr1;
+	u32 vclkcr2;
+	u32 fmsickcr;
+	u32 fmsockcr;
+	u32 fsiackcr;
+	u32 dummy0; /* 0x1c */
+	u32 rtstbcr;
+	u32 systbcr;
+	u32 pllc01cr;
+	u32 pllc2cr;
+	u32 mstpsr0;
+	u32 dummy1; /* 0x34 */
+	u32 mstpsr1;
+	u32 mstpsr5;
+	u32 mstpsr2;
+	u32 dummy2; /* 0x44 */
+	u32 mstpsr3;
+	u32 mstpsr4;
+	u32 dummy3; /* 0x50 */
+	u32 astat;
+	u32 dummy4[4]; /* 0x58 .. 0x64 */
+	u32 ztrckcr;
+	u32 dummy5[5]; /* 0x6c .. 0x7c */
+	u32 subckcr;
+	u32 spuckcr;
+	u32 vouckcr;
+	u32 usbckcr;
+	u32 dummy6[3]; /* 0x90 .. 0x98 */
+	u32 stprckcr;
+	u32 srcr0;
+	u32 dummy7; /* 0xa4 */
+	u32 srcr1;
+	u32 dummy8; /* 0xac */
+	u32 srcr2;
+	u32 dummy9; /* 0xb4 */
+	u32 srcr3;
+	u32 srcr4;
+	u32 dummy10; /* 0xc0 */
+	u32 srcr5;
+	u32 pllc01stpcr;
+	u32 dummy11[5]; /* 0xcc .. 0xdc */
+	u32 frqcrc;
+	u32 frqcrd;
+	u32 dummy12[10]; /* 0xe8 .. 0x10c */
+	u32 rmstpcr0;
+	u32 rmstpcr1;
+	u32 rmstpcr2;
+	u32 rmstpcr3;
+	u32 rmstpcr4;
+	u32 rmstpcr5;
+	u32 dummy13[2]; /* 0x128 .. 0x12c */
+	u32 smstpcr0;
+	u32 smstpcr1;
+	u32 smstpcr2;
+	u32 smstpcr3;
+	u32 smstpcr4;
+	u32 smstpcr5;
+};
+
+/* BSC */
+struct r8a7740_bsc {
+	u32 cmncr;
+	u32 cs0bcr;
+	u32 cs2bcr;
+	u32 dummy0; /* 0x0c */
+	u32 cs4bcr;
+	u32 cs5abcr;
+	u32 cs5bbcr;
+	u32 cs6abcr;
+	u32 dummy1; /* 0x20 */
+	u32 cs0wcr;
+	u32 cs2wcr;
+	u32 dummy2; /* 0x2c */
+	u32 cs4wcr;
+	u32 cs5awcr;
+	u32 cs5bwcr;
+	u32 cs6awcr;
+	u32 dummy3[5]; /* 0x40 .. 0x50 */
+	u32 rbwtcnt;
+	u32 busycr;
+	u32 dummy4[5]; /* 0x5c .. 0x6c */
+	u32 bromtimcr;
+	u32 dummy5[7]; /* 0x74 .. 0x8c */
+	u32 bptcr00;
+	u32 bptcr01;
+	u32 bptcr02;
+	u32 bptcr03;
+	u32 bptcr04;
+	u32 bptcr05;
+	u32 bptcr06;
+	u32 bptcr07;
+	u32 bptcr08;
+	u32 bptcr09;
+	u32 bptcr10;
+	u32 bptcr11;
+	u32 bptcr12;
+	u32 bptcr13;
+	u32 bptcr14;
+	u32 bptcr15;
+	u32 bptcr16;
+	u32 bptcr17;
+	u32 bptcr18;
+	u32 bptcr19;
+	u32 bptcr20;
+	u32 bptcr21;
+	u32 bptcr22;
+	u32 bptcr23;
+	u32 bptcr24;
+	u32 bptcr25;
+	u32 bptcr26;
+	u32 bptcr27;
+	u32 bptcr28;
+	u32 bptcr29;
+	u32 bptcr30;
+	u32 bptcr31;
+	u32 bswcr;
+	u32 dummy6[68]; /* 0x114 .. 0x220 */
+	u32 cs0wcr2;
+	u32 cs2wcr2;
+	u32 dummy7; /* 0x22c */
+	u32 cs4wcr2;
+};
+
+#define CS0WCR2 0xFEC10224
+#define CS2WCR2 0xFEC10228
+#define CS4WCR2 0xFEC10230
+
+/* DDRP */
+struct r8a7740_ddrp {
+	u32 funcctrl;
+	u32 dllctrl;
+	u32 zqcalctrl;
+	u32 zqodtctrl;
+	u32 rdctrl;
+	u32 rdtmg;
+	u32 fifoinit;
+	u32 outctrl;
+	u32 dummy0[50]; /* 0x20 .. 0xe4 */
+	u32 dqcalofs1;
+	u32 dqcalofs2;
+	u32 dummy1[2]; /* 0xf0 .. 0xf4 */
+	u32 dqcalexp;
+};
+
+#define DDRPNCNT 0xE605803C
+#define DDRVREFCNT 0xE61500EC
+
+/* DBSC */
+struct r8a7740_dbsc {
+	u32 dummy0;
+	u32 dbsvcr;
+	u32 dbstate0;
+	u32 dbstate1;
+	u32 dbacen;
+	u32 dbrfen;
+	u32 dbcmd;
+	u32 dbwait;
+	u32 dbkind;
+	u32 dbconf0;
+	u32 dummy1[2]; /* 0x28 .. 0x2c */
+	u32 dbphytype;
+	u32 dummy2[3]; /* 0x34 .. 0x3c */
+	u32 dbtr0;
+	u32 dbtr1;
+	u32 dbtr2;
+	u32 dummy3; /* 0x4c */
+	u32 dbtr3;
+	u32 dbtr4;
+	u32 dbtr5;
+	u32 dbtr6;
+	u32 dbtr7;
+	u32 dbtr8;
+	u32 dbtr9;
+	u32 dbtr10;
+	u32 dbtr11;
+	u32 dbtr12;
+	u32 dbtr13;
+	u32 dbtr14;
+	u32 dbtr15;
+	u32 dbtr16;
+	u32 dbtr17;
+	u32 dbtr18;
+	u32 dbtr19;
+	u32 dummy4[7]; /* 0x94 .. 0xac */
+	u32 dbbl;
+	u32 dummy5[3]; /* 0xb4 .. 0xbc */
+	u32 dbadj0;
+	u32 dbadj1;
+	u32 dbadj2;
+	u32 dummy6[5]; /* 0xcc .. 0xdc */
+	u32 dbrfcnf0;
+	u32 dbrfcnf1;
+	u32 dbrfcnf2;
+	u32 dbrfcnf3;
+	u32 dummy7; /* 0xf0 */
+	u32 dbcalcnf;
+	u32 dbcaltr;
+	u32 dummy8; /* 0xfc */;
+	u32 dbrnk0;
+	u32 dummy9[31]; /* 0x104 .. 0x17C */
+	u32 dbpdncnf;
+	u32 dummy10[7]; /* 0x184 .. 0x19C */
+	u32 dbmrrdr;
+	u32 dummy11[39]; /* 0x1A4 .. 0x23C */
+	u32 dbdfistat;
+	u32 dbdficnt;
+	u32 dummy12[46]; /* 0x248 .. 0x2FC */
+	u32 dbbs0cnt0;
+	u32 dbbs0cnt1;
+};
+
+#endif
+
+#endif /* __ASM_ARCH_R8A7740_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7790.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7790.h
new file mode 100644
index 000000000..f3fbf77b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7790.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7790.h
+ *
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
+ */
+
+#ifndef __ASM_ARCH_R8A7790_H
+#define __ASM_ARCH_R8A7790_H
+
+#include "rcar-base.h"
+
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2	0xE6520000
+#define CONFIG_SYS_I2C_SH_BASE3	0xE60B0000
+
+/* Module stop control/status register bits */
+#define MSTP0_BITS	0x00640801
+#define MSTP1_BITS	0xDB6E9BDF
+#define MSTP2_BITS	0x300DA1FC
+#define MSTP3_BITS	0xF08CF831
+#define MSTP4_BITS	0x80000184
+#define MSTP5_BITS	0x44C00046
+#define MSTP7_BITS	0x07F30718
+#define MSTP8_BITS	0x01F0FF84
+#define MSTP9_BITS	0xF5979FCF
+#define MSTP10_BITS	0xFFFEFFE0
+#define MSTP11_BITS	0x00000000
+
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI1_BASE 0xEE120000
+#define CONFIG_SYS_SH_SDHI2_BASE 0xEE140000
+#define CONFIG_SYS_SH_SDHI3_BASE 0xEE160000
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 4
+
+#define R8A7790_CUT_ES2X	2
+#define IS_R8A7790_ES2()	\
+	(rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X)
+
+#endif /* __ASM_ARCH_R8A7790_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7791.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7791.h
new file mode 100644
index 000000000..fec9f7bf5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7791.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7791.h
+ *
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
+ */
+
+#ifndef __ASM_ARCH_R8A7791_H
+#define __ASM_ARCH_R8A7791_H
+
+#include "rcar-base.h"
+/*
+ * R-Car (R8A7791) I/O Addresses
+ */
+
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2	0xE60B0000
+
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000
+#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3
+
+#define DBSC3_1_QOS_R0_BASE	0xE67A1000
+#define DBSC3_1_QOS_R1_BASE	0xE67A1100
+#define DBSC3_1_QOS_R2_BASE	0xE67A1200
+#define DBSC3_1_QOS_R3_BASE	0xE67A1300
+#define DBSC3_1_QOS_R4_BASE	0xE67A1400
+#define DBSC3_1_QOS_R5_BASE	0xE67A1500
+#define DBSC3_1_QOS_R6_BASE	0xE67A1600
+#define DBSC3_1_QOS_R7_BASE	0xE67A1700
+#define DBSC3_1_QOS_R8_BASE	0xE67A1800
+#define DBSC3_1_QOS_R9_BASE	0xE67A1900
+#define DBSC3_1_QOS_R10_BASE	0xE67A1A00
+#define DBSC3_1_QOS_R11_BASE	0xE67A1B00
+#define DBSC3_1_QOS_R12_BASE	0xE67A1C00
+#define DBSC3_1_QOS_R13_BASE	0xE67A1D00
+#define DBSC3_1_QOS_R14_BASE	0xE67A1E00
+#define DBSC3_1_QOS_R15_BASE	0xE67A1F00
+#define DBSC3_1_QOS_W0_BASE	0xE67A2000
+#define DBSC3_1_QOS_W1_BASE	0xE67A2100
+#define DBSC3_1_QOS_W2_BASE	0xE67A2200
+#define DBSC3_1_QOS_W3_BASE	0xE67A2300
+#define DBSC3_1_QOS_W4_BASE	0xE67A2400
+#define DBSC3_1_QOS_W5_BASE	0xE67A2500
+#define DBSC3_1_QOS_W6_BASE	0xE67A2600
+#define DBSC3_1_QOS_W7_BASE	0xE67A2700
+#define DBSC3_1_QOS_W8_BASE	0xE67A2800
+#define DBSC3_1_QOS_W9_BASE	0xE67A2900
+#define DBSC3_1_QOS_W10_BASE	0xE67A2A00
+#define DBSC3_1_QOS_W11_BASE	0xE67A2B00
+#define DBSC3_1_QOS_W12_BASE	0xE67A2C00
+#define DBSC3_1_QOS_W13_BASE	0xE67A2D00
+#define DBSC3_1_QOS_W14_BASE	0xE67A2E00
+#define DBSC3_1_QOS_W15_BASE	0xE67A2F00
+#define DBSC3_1_DBADJ2		0xE67A00C8
+
+/* Module stop control/status register bits */
+#define MSTP0_BITS	0x00640801
+#define MSTP1_BITS	0x9B6C9B5A
+#define MSTP2_BITS	0x100D21FC
+#define MSTP3_BITS	0xF08CD810
+#define MSTP4_BITS	0x800001C4
+#define MSTP5_BITS	0x44C00046
+#define MSTP7_BITS	0x05BFE618
+#define MSTP8_BITS	0x40C0FE85
+#define MSTP9_BITS	0xFF979FFF
+#define MSTP10_BITS	0xFFFEFFE0
+#define MSTP11_BITS	0x000001C0
+
+#define R8A7791_CUT_ES2X	2
+#define IS_R8A7791_ES2()	\
+	(rmobile_get_cpu_rev_integer() == R8A7791_CUT_ES2X)
+
+#endif /* __ASM_ARCH_R8A7791_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7792.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7792.h
new file mode 100644
index 000000000..8acd7ba75
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7792.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7792.h
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ */
+
+#ifndef __ASM_ARCH_R8A7792_H
+#define __ASM_ARCH_R8A7792_H
+
+#include "rcar-base.h"
+
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2	0xE6520000
+#define CONFIG_SYS_I2C_SH_BASE3	0xE60B0000
+
+/* Module stop control/status register bits */
+#define MSTP0_BITS	0x00400801
+#define MSTP1_BITS	0x9B6F987F
+#define MSTP2_BITS	0x108CE100
+#define MSTP3_BITS	0x20004010
+#define MSTP4_BITS	0x80000184
+#define MSTP5_BITS	0x44C00004
+#define MSTP7_BITS	0x01BF0000
+#define MSTP8_BITS	0x1FE01FB0
+#define MSTP9_BITS	0xFE2BFFB2
+#define MSTP10_BITS	0x00001820
+#define MSTP11_BITS	0x00000008
+
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 1
+
+#endif /* __ASM_ARCH_R8A7792_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7793.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7793.h
new file mode 100644
index 000000000..278c7768d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7793.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7793.h
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ */
+
+#ifndef __ASM_ARCH_R8A7793_H
+#define __ASM_ARCH_R8A7793_H
+
+#include "rcar-base.h"
+
+/*
+ * R8A7793 I/O Addresses
+ */
+
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2	0xE60B0000
+
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000
+#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3
+
+#define DBSC3_1_QOS_R0_BASE	0xE67A1000
+#define DBSC3_1_QOS_R1_BASE	0xE67A1100
+#define DBSC3_1_QOS_R2_BASE	0xE67A1200
+#define DBSC3_1_QOS_R3_BASE	0xE67A1300
+#define DBSC3_1_QOS_R4_BASE	0xE67A1400
+#define DBSC3_1_QOS_R5_BASE	0xE67A1500
+#define DBSC3_1_QOS_R6_BASE	0xE67A1600
+#define DBSC3_1_QOS_R7_BASE	0xE67A1700
+#define DBSC3_1_QOS_R8_BASE	0xE67A1800
+#define DBSC3_1_QOS_R9_BASE	0xE67A1900
+#define DBSC3_1_QOS_R10_BASE	0xE67A1A00
+#define DBSC3_1_QOS_R11_BASE	0xE67A1B00
+#define DBSC3_1_QOS_R12_BASE	0xE67A1C00
+#define DBSC3_1_QOS_R13_BASE	0xE67A1D00
+#define DBSC3_1_QOS_R14_BASE	0xE67A1E00
+#define DBSC3_1_QOS_R15_BASE	0xE67A1F00
+#define DBSC3_1_QOS_W0_BASE	0xE67A2000
+#define DBSC3_1_QOS_W1_BASE	0xE67A2100
+#define DBSC3_1_QOS_W2_BASE	0xE67A2200
+#define DBSC3_1_QOS_W3_BASE	0xE67A2300
+#define DBSC3_1_QOS_W4_BASE	0xE67A2400
+#define DBSC3_1_QOS_W5_BASE	0xE67A2500
+#define DBSC3_1_QOS_W6_BASE	0xE67A2600
+#define DBSC3_1_QOS_W7_BASE	0xE67A2700
+#define DBSC3_1_QOS_W8_BASE	0xE67A2800
+#define DBSC3_1_QOS_W9_BASE	0xE67A2900
+#define DBSC3_1_QOS_W10_BASE	0xE67A2A00
+#define DBSC3_1_QOS_W11_BASE	0xE67A2B00
+#define DBSC3_1_QOS_W12_BASE	0xE67A2C00
+#define DBSC3_1_QOS_W13_BASE	0xE67A2D00
+#define DBSC3_1_QOS_W14_BASE	0xE67A2E00
+#define DBSC3_1_QOS_W15_BASE	0xE67A2F00
+
+#define DBSC3_1_DBADJ2		0xE67A00C8
+
+/*
+ * R8A7793 I/O Product Information
+ */
+
+/* Module stop control/status register bits */
+#define MSTP0_BITS	0x00640801
+#define MSTP1_BITS	0x9B6C9B5A
+#define MSTP2_BITS	0x100D21FC
+#define MSTP3_BITS	0xF08CD810
+#define MSTP4_BITS	0x800001C4
+#define MSTP5_BITS	0x44C00046
+#define MSTP7_BITS	0x05BFE618
+#define MSTP8_BITS	0x40C0FE85
+#define MSTP9_BITS	0xFF979FFF
+#define MSTP10_BITS	0xFFFEFFE0
+#define MSTP11_BITS	0x000001C0
+
+#define R8A7793_CUT_ES2X	2
+#define IS_R8A7793_ES2() \
+	(rmobile_get_cpu_rev_integer() == R8A7793_CUT_ES2X)
+
+#endif /* __ASM_ARCH_R8A7793_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7794.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7794.h
new file mode 100644
index 000000000..73259c7ec
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/r8a7794.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7794.h
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ */
+
+#ifndef __ASM_ARCH_R8A7794_H
+#define __ASM_ARCH_R8A7794_H
+
+#include "rcar-base.h"
+
+/* SH-I2C */
+#define CONFIG_SYS_I2C_SH_BASE2	0xE60B0000
+
+/* Module stop control/status register bits */
+#define MSTP0_BITS	0x00440801
+#define MSTP1_BITS	0x936899DA
+#define MSTP2_BITS	0x100D21FC
+#define MSTP3_BITS	0xE084D810
+#define MSTP4_BITS	0x800001C4
+#define MSTP5_BITS	0x40C00044
+#define MSTP7_BITS	0x013FE618
+#define MSTP8_BITS	0x40803C05
+#define MSTP9_BITS	0xFB879FEE
+#define MSTP10_BITS	0xFFFEFFE0
+#define MSTP11_BITS	0x000001C0
+
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000
+#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3
+
+#define R8A7794_CUT_ES2		2
+#define IS_R8A7794_ES2()	\
+	(rmobile_get_cpu_rev_integer() == R8A7794_CUT_ES2)
+
+#endif /* __ASM_ARCH_R8A7794_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-base.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-base.h
new file mode 100644
index 000000000..a20740679
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-base.h
@@ -0,0 +1,1046 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/include/asm/arch-rmobile/rcar-base.h
+ *
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
+ */
+
+#ifndef __ASM_ARCH_RCAR_BASE_H
+#define __ASM_ARCH_RCAR_BASE_H
+
+/*
+ * R-Car (R8A7790/R8A7791/R8A7792/R8A7793/R8A7794) I/O Addresses
+ */
+#define RWDT_BASE		0xE6020000
+#define SWDT_BASE		0xE6030000
+#define LBSC_BASE		0xFEC00200
+#define DBSC3_0_BASE		0xE6790000
+#define DBSC3_1_BASE		0xE67A0000
+#define TMU_BASE		0xE61E0000
+#define GPIO5_BASE		0xE6055000
+#define SH_QSPI_BASE		0xE6B10000
+
+/* SCIF */
+#define SCIF0_BASE		0xE6E60000
+#define SCIF1_BASE		0xE6E68000
+#define SCIF2_BASE		0xE6E58000
+#define SCIF3_BASE		0xE6EA8000
+#define SCIF4_BASE		0xE6EE0000
+#define SCIF5_BASE		0xE6EE8000
+#define SCIFA0_BASE		0xE6C40000
+#define SCIFA1_BASE		0xE6C50000
+#define SCIFA2_BASE		0xE6C60000
+
+/* Module stop status register */
+#define MSTPSR0			0xE6150030
+#define MSTPSR1			0xE6150038
+#define MSTPSR2			0xE6150040
+#define MSTPSR3			0xE6150048
+#define MSTPSR4			0xE615004C
+#define MSTPSR5			0xE615003C
+#define MSTPSR7			0xE61501C4
+#define MSTPSR8			0xE61509A0
+#define MSTPSR9			0xE61509A4
+#define MSTPSR10		0xE61509A8
+#define MSTPSR11		0xE61509AC
+
+/* Realtime module stop control register */
+#define RMSTPCR0		0xE6150110
+#define RMSTPCR1		0xE6150114
+#define RMSTPCR2		0xE6150118
+#define RMSTPCR3		0xE615011C
+#define RMSTPCR4		0xE6150120
+#define RMSTPCR5		0xE6150124
+#define RMSTPCR7		0xE615012C
+#define RMSTPCR8		0xE6150980
+#define RMSTPCR9		0xE6150984
+#define RMSTPCR10		0xE6150988
+#define RMSTPCR11		0xE615098C
+
+/* System module stop control register */
+#define SMSTPCR0		0xE6150130
+#define SMSTPCR1		0xE6150134
+#define SMSTPCR2		0xE6150138
+#define SMSTPCR3		0xE615013C
+#define SMSTPCR4		0xE6150140
+#define SMSTPCR5		0xE6150144
+#define SMSTPCR7		0xE615014C
+#define SMSTPCR8		0xE6150990
+#define SMSTPCR9		0xE6150994
+#define SMSTPCR10		0xE6150998
+#define SMSTPCR11		0xE615099C
+
+/*
+ * SH-I2C
+ * Ch2 and ch3 are different address. These are defined
+ * in the header of each SoCs.
+ */
+#define CONFIG_SYS_I2C_SH_BASE0	0xE6500000
+#define CONFIG_SYS_I2C_SH_BASE1	0xE6510000
+
+/* RCAR-I2C */
+#define CONFIG_SYS_RCAR_I2C0_BASE	0xE6508000
+#define CONFIG_SYS_RCAR_I2C1_BASE	0xE6518000
+#define CONFIG_SYS_RCAR_I2C2_BASE	0xE6530000
+#define CONFIG_SYS_RCAR_I2C3_BASE	0xE6540000
+
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI0_BASE	0xEE100000
+
+#define S3C_BASE		0xE6784000
+#define S3C_INT_BASE		0xE6784A00
+#define S3C_MEDIA_BASE		0xE6784B00
+
+#define S3C_QOS_DCACHE_BASE	0xE6784BDC
+#define S3C_QOS_CCI0_BASE	0xE6784C00
+#define S3C_QOS_CCI1_BASE	0xE6784C24
+#define S3C_QOS_MXI_BASE	0xE6784C48
+#define S3C_QOS_AXI_BASE	0xE6784C6C
+
+#define DBSC3_0_QOS_R0_BASE	0xE6791000
+#define DBSC3_0_QOS_R1_BASE	0xE6791100
+#define DBSC3_0_QOS_R2_BASE	0xE6791200
+#define DBSC3_0_QOS_R3_BASE	0xE6791300
+#define DBSC3_0_QOS_R4_BASE	0xE6791400
+#define DBSC3_0_QOS_R5_BASE	0xE6791500
+#define DBSC3_0_QOS_R6_BASE	0xE6791600
+#define DBSC3_0_QOS_R7_BASE	0xE6791700
+#define DBSC3_0_QOS_R8_BASE	0xE6791800
+#define DBSC3_0_QOS_R9_BASE	0xE6791900
+#define DBSC3_0_QOS_R10_BASE	0xE6791A00
+#define DBSC3_0_QOS_R11_BASE	0xE6791B00
+#define DBSC3_0_QOS_R12_BASE	0xE6791C00
+#define DBSC3_0_QOS_R13_BASE	0xE6791D00
+#define DBSC3_0_QOS_R14_BASE	0xE6791E00
+#define DBSC3_0_QOS_R15_BASE	0xE6791F00
+#define DBSC3_0_QOS_W0_BASE	0xE6792000
+#define DBSC3_0_QOS_W1_BASE	0xE6792100
+#define DBSC3_0_QOS_W2_BASE	0xE6792200
+#define DBSC3_0_QOS_W3_BASE	0xE6792300
+#define DBSC3_0_QOS_W4_BASE	0xE6792400
+#define DBSC3_0_QOS_W5_BASE	0xE6792500
+#define DBSC3_0_QOS_W6_BASE	0xE6792600
+#define DBSC3_0_QOS_W7_BASE	0xE6792700
+#define DBSC3_0_QOS_W8_BASE	0xE6792800
+#define DBSC3_0_QOS_W9_BASE	0xE6792900
+#define DBSC3_0_QOS_W10_BASE	0xE6792A00
+#define DBSC3_0_QOS_W11_BASE	0xE6792B00
+#define DBSC3_0_QOS_W12_BASE	0xE6792C00
+#define DBSC3_0_QOS_W13_BASE	0xE6792D00
+#define DBSC3_0_QOS_W14_BASE	0xE6792E00
+#define DBSC3_0_QOS_W15_BASE	0xE6792F00
+#define DBSC3_0_DBADJ2		0xE67900C8
+
+#define CCI_400_MAXOT_1		0xF0091110
+#define CCI_400_MAXOT_2		0xF0092110
+#define CCI_400_QOSCNTL_1	0xF009110C
+#define CCI_400_QOSCNTL_2	0xF009210C
+
+#define	MXI_BASE		0xFE960000
+#define	MXI_QOS_BASE		0xFE960300
+
+#define SYS_AXI_SYX64TO128_BASE	0xFF800300
+#define SYS_AXI_AVB_BASE	0xFF800340
+#define SYS_AXI_AX2M_BASE	0xFF800380
+#define SYS_AXI_CC50_BASE	0xFF8003C0
+#define SYS_AXI_CCI_BASE	0xFF800440
+#define SYS_AXI_CS_BASE		0xFF800480
+#define SYS_AXI_DDM_BASE	0xFF8004C0
+#define SYS_AXI_ETH_BASE	0xFF800500
+#define SYS_AXI_G2D_BASE	0xFF800540
+#define SYS_AXI_IMP0_BASE	0xFF800580
+#define SYS_AXI_IMP1_BASE	0xFF8005C0
+#define SYS_AXI_IMUX0_BASE	0xFF800600
+#define SYS_AXI_IMUX1_BASE	0xFF800640
+#define SYS_AXI_IMUX2_BASE	0xFF800680
+#define SYS_AXI_LBS_BASE	0xFF8006C0
+#define SYS_AXI_MMUDS_BASE	0xFF800700
+#define SYS_AXI_MMUM_BASE	0xFF800740
+#define SYS_AXI_MMUR_BASE	0xFF800780
+#define SYS_AXI_MMUS0_BASE	0xFF8007C0
+#define SYS_AXI_MMUS1_BASE	0xFF800800
+#define SYS_AXI_MPXM_BASE	0xFF800840
+#define SYS_AXI_MTSB0_BASE	0xFF800880
+#define SYS_AXI_MTSB1_BASE	0xFF8008C0
+#define SYS_AXI_PCI_BASE	0xFF800900
+#define SYS_AXI_RTX_BASE	0xFF800940
+#define SYS_AXI_SAT0_BASE	0xFF800980
+#define SYS_AXI_SAT1_BASE	0xFF8009C0
+#define SYS_AXI_SDM0_BASE	0xFF800A00
+#define SYS_AXI_SDM1_BASE	0xFF800A40
+#define SYS_AXI_SDS0_BASE	0xFF800A80
+#define SYS_AXI_SDS1_BASE	0xFF800AC0
+#define SYS_AXI_TRAB_BASE	0xFF800B00 /* SYS_AXI_TRKF_BASE in R*A7794 */
+#define SYS_AXI_UDM0_BASE	0xFF800B80
+#define SYS_AXI_UDM1_BASE	0xFF800BC0
+#define SYS_AXI_USB20_BASE	0xFF800C00
+#define SYS_AXI_USB21_BASE	0xFF800C40
+#define SYS_AXI_USB22_BASE	0xFF800C80
+#define SYS_AXI_USB30_BASE	0xFF800CC0
+#define SYS_AXI_ADM_BASE	0xFF800D00
+#define SYS_AXI_ADS_BASE	0xFF800D40
+#define SYS_AXI_SYX_BASE	0xFF800FB8
+
+#define SYS_AXI_AXI64TO128W_BASE	0xFF801300
+#define SYS_AXI_AVBW_BASE	0xFF801340
+#define SYS_AXI_CC50W_BASE	0xFF8013C0
+#define SYS_AXI_CCIW_BASE	0xFF801440
+#define SYS_AXI_CSW_BASE	0xFF801480
+#define SYS_AXI_G2DW_BASE	0xFF801540
+#define SYS_AXI_IMUX0W_BASE	0xFF801600
+#define SYS_AXI_IMUX1W_BASE	0xFF801640
+#define SYS_AXI_IMUX2W_BASE	0xFF801680
+#define SYS_AXI_LBSW_BASE	0xFF8016C0
+#define SYS_AXI_RTXW_BASE	0xFF801940
+#define SYS_AXI_SDM0W_BASE	0xFF801A00
+#define SYS_AXI_SDM1W_BASE	0xFF801A40
+#define SYS_AXI_SDS0W_BASE	0xFF801A80
+#define SYS_AXI_SDS1W_BASE	0xFF801AC0
+#define SYS_AXI_TRABW_BASE	0xFF801B00 /* SYS_AXI_TRKF_BASE in R*A7794 */
+#define SYS_AXI_UDM0W_BASE	0xFF801B80
+#define SYS_AXI_UDM1W_BASE	0xFF801BC0
+#define SYS_AXI_ADMW_BASE	0xFF801D00
+#define SYS_AXI_ADSW_BASE	0xFF801D40
+#define SYS_AXI_SYXW_BASE	0xFF801FB8
+
+#define RT_AXI_SHX_BASE		0xFF810100
+#define RT_AXI_DBG_BASE		0xFF810140 /* R8A7791 only */
+#define RT_AXI_RDM_BASE		0xFF810180 /* R8A7791 only */
+#define RT_AXI_RDS_BASE		0xFF8101C0
+#define RT_AXI_RTX64TO128_BASE	0xFF810200
+#define RT_AXI_STPRO_BASE	0xFF810240
+#define RT_AXI_SY2RT_BASE	0xFF810280 /* R8A7791 only */
+#define RT_AXI_RT_BASE		0xFF810FC0
+#define RT_AXI_SHXW_BASE	0xFF811100
+#define RT_AXI_DBGW_BASE	0xFF811140
+#define RT_AXI_RTX64TO128W_BASE	0xFF811200
+#define RT_AXI_RTW_BASE		0xFF811FC0
+
+#define MP_AXI_ADSP_BASE	0xFF820100
+#define MP_AXI_ASDS0_BASE	0xFF8201C0
+#define MP_AXI_ASDS1_BASE	0xFF820200
+#define MP_AXI_MLP_BASE		0xFF820240
+#define MP_AXI_MMUMP_BASE	0xFF820280
+#define MP_AXI_SPU_BASE		0xFF8202C0
+#define MP_AXI_SPUC_BASE	0xFF820300
+
+#define SYS_AXI256_AXI128TO256_BASE	0xFF860100
+#define SYS_AXI256_SYX_BASE	0xFF860140
+#define SYS_AXI256_AXM_BASE	0xFF860140
+#define SYS_AXI256_MPX_BASE	0xFF860180
+#define SYS_AXI256_MXI_BASE	0xFF8601C0
+#define SYS_AXI256_IMP0_BASE	0xFF860580
+#define SYS_AXI256_SY2_BASE	0xFF860FC0
+#define SYS_AXI256_AXI128TO256W_BASE	0xFF861100
+#define SYS_AXI256_AXMW_BASE	0xFF861140
+#define SYS_AXI256_MXIW_BASE	0xFF8611C0
+#define SYS_AXI256_IMP0W_BASE	0xFF861580
+#define SYS_AXI256_SY2W_BASE	0xFF861FC0
+
+#define CCI_AXI_MMUS0_BASE	0xFF880100
+#define CCI_AXI_SYX2_BASE	0xFF880140
+#define CCI_AXI_MMUR_BASE	0xFF880180
+#define CCI_AXI_MMUDS_BASE	0xFF8801C0
+#define CCI_AXI_MMUM_BASE	0xFF880200
+#define CCI_AXI_MXI_BASE	0xFF880240
+#define CCI_AXI_MMUS1_BASE	0xFF880280
+#define CCI_AXI_MMUMP_BASE	0xFF8802C0
+
+#define MEDIA_AXI_MXR_BASE	0xFE960080 /* R8A7791 only */
+#define MEDIA_AXI_MXW_BASE	0xFE9600C0 /* R8A7791 only */
+#define MEDIA_AXI_JPR_BASE	0xFE964100
+#define MEDIA_AXI_JPW_BASE	0xFE966100
+#define MEDIA_AXI_GCU0R_BASE	0xFE964140
+#define MEDIA_AXI_GCU0W_BASE	0xFE966140
+#define MEDIA_AXI_GCU1R_BASE	0xFE964180
+#define MEDIA_AXI_GCU1W_BASE	0xFE966180
+#define MEDIA_AXI_TDMR_BASE	0xFE964500
+#define MEDIA_AXI_TDMW_BASE	0xFE966500
+#define MEDIA_AXI_VSP0CR_BASE	0xFE964540
+#define MEDIA_AXI_VSP0CW_BASE	0xFE966540
+#define MEDIA_AXI_VSP1CR_BASE	0xFE964580
+#define MEDIA_AXI_VSP1CW_BASE	0xFE966580
+#define MEDIA_AXI_VSPDU0CR_BASE	0xFE9645C0
+#define MEDIA_AXI_VSPDU0CW_BASE	0xFE9665C0
+#define MEDIA_AXI_VSPDU1CR_BASE	0xFE964600
+#define MEDIA_AXI_VSPDU1CW_BASE	0xFE966600
+#define MEDIA_AXI_FDP0R_BASE	0xFE964D40
+#define MEDIA_AXI_FDP0W_BASE	0xFE966D40
+#define MEDIA_AXI_IMSR_BASE	0xFE964D80
+#define MEDIA_AXI_IMSW_BASE	0xFE966D80
+#define MEDIA_AXI_VSP1R_BASE	0xFE965100
+#define MEDIA_AXI_VSP1W_BASE	0xFE967100
+#define MEDIA_AXI_FDP1R_BASE	0xFE965140
+#define MEDIA_AXI_FDP1W_BASE	0xFE967140
+#define MEDIA_AXI_IMRR_BASE	0xFE965180
+#define MEDIA_AXI_IMRW_BASE	0xFE967180
+#define MEDIA_AXI_FDP2R_BASE	0xFE9651C0
+#define MEDIA_AXI_FDP2W_BASE	0xFE966DC0
+#define MEDIA_AXI_DU1R_BASE	0xFE9655C0
+#define MEDIA_AXI_DU1W_BASE	0xFE9675C0
+#define MEDIA_AXI_VCP0CR_BASE	0xFE965900
+#define MEDIA_AXI_VCP0CW_BASE	0xFE967900
+#define MEDIA_AXI_VCP0VR_BASE	0xFE965940
+#define MEDIA_AXI_VCP0VW_BASE	0xFE967940
+#define MEDIA_AXI_VPC0R_BASE	0xFE965980
+#define MEDIA_AXI_VCP1CR_BASE	0xFE965D00
+#define MEDIA_AXI_VCP1CW_BASE	0xFE967D00
+#define MEDIA_AXI_VCP1VR_BASE	0xFE965D40
+#define MEDIA_AXI_VCP1VW_BASE	0xFE967D40
+#define MEDIA_AXI_VPC1R_BASE	0xFE965D80
+
+#if defined (CONFIG_R8A7792)
+#define MEDIA_AXI_VCTU0R_BASE	0xFE964500 /* R8A7792 */
+#define MEDIA_AXI_VCTU0W_BASE	0xFE966500
+#define MEDIA_AXI_VDCTU0R_BASE	0xFE964540
+#define MEDIA_AXI_VDCTU0W_BASE	0xFE966540
+#define MEDIA_AXI_VDCTU1R_BASE	0xFE964580
+#define MEDIA_AXI_VDCTU1W_BASE	0xFE966580
+#define MEDIA_AXI_VIN0W_BASE	0xFE967580
+#define MEDIA_AXI_VIN1W_BASE	0xFE966D80
+#define MEDIA_AXI_RDRW_BASE	0xFE9675C0
+#define MEDIA_AXI_IMS01R_BASE	0xFE965500
+#define MEDIA_AXI_IMS01W_BASE	0xFE967500
+#define MEDIA_AXI_IMS23R_BASE	0xFE965540 /* FIXME */
+#define MEDIA_AXI_IMS23W_BASE	0xFE967540
+#define MEDIA_AXI_IMS45R_BASE	0xFE964D00
+#define MEDIA_AXI_IMS45W_BASE	0xFE966D00
+#define MEDIA_AXI_ROTCE4R_BASE	0xFE965100
+#define MEDIA_AXI_ROTCE4W_BASE	0xFE967100
+#define MEDIA_AXI_ROTVLC4R_BASE	0xFE965140
+#define MEDIA_AXI_ROTVLC4W_BASE	0xFE965140
+#define MEDIA_AXI_VSPD0R_BASE	0xFE964900
+#define MEDIA_AXI_VSPD0W_BASE	0xFE966900
+#define MEDIA_AXI_VSPD1R_BASE	0xFE964940
+#define MEDIA_AXI_VSPD1W_BASE	0xFE966940
+#define MEDIA_AXI_DU0R_BASE	0xFE964980
+#define MEDIA_AXI_DU0W_BASE	0xFE966980
+#define MEDIA_AXI_VSP0R_BASE	0xFE9649C0
+#define MEDIA_AXI_VSP0W_BASE	0xFE9669C0
+#define MEDIA_AXI_ROTCE0R_BASE	0xFE965900
+#define MEDIA_AXI_ROTCE0W_BASE	0xFE967900
+#define MEDIA_AXI_ROTVLC0R_BASE	0xFE965940
+#define MEDIA_AXI_ROTVLC0W_BASE	0xFE967940
+#define MEDIA_AXI_ROTCE1R_BASE	0xFE965980
+#define MEDIA_AXI_ROTCE1W_BASE	0xFE967980
+#define MEDIA_AXI_ROTVLC1R_BASE	0xFE9659C0
+#define MEDIA_AXI_ROTVLC1W_BASE	0xFE9679C0
+#define MEDIA_AXI_ROTCE2R_BASE	0xFE965D00
+#define MEDIA_AXI_ROTCE2W_BASE	0xFE967D00
+#define MEDIA_AXI_ROTVLC2R_BASE	0xFE965D40
+#define MEDIA_AXI_ROTVLC2W_BASE	0xFE967D40
+#define MEDIA_AXI_ROTCE3R_BASE	0xFE965D80
+#define MEDIA_AXI_ROTCE3W_BASE	0xFE967D80
+#define MEDIA_AXI_ROTVLC3R_BASE	0xFE965DC0
+#define MEDIA_AXI_ROTVLC3W_BASE	0xFE967DC0
+#else	/* R8A7792 */
+#define MEDIA_AXI_VIN0W_BASE	0xFE966900
+#define MEDIA_AXI_VSPD0R_BASE	0xFE965500
+#define MEDIA_AXI_VSPD0W_BASE	0xFE967500
+#define MEDIA_AXI_VSPD1R_BASE	0xFE965540
+#define MEDIA_AXI_VSPD1W_BASE	0xFE967540
+#define MEDIA_AXI_DU0R_BASE	0xFE965580
+#define MEDIA_AXI_DU0W_BASE	0xFE967580
+#define MEDIA_AXI_VSP0R_BASE	0xFE964D00
+#define MEDIA_AXI_VSP0W_BASE	0xFE966D00
+#endif	/* R8A7792 */
+
+
+#define SYS_AXI_AVBDMSCR	0xFF802000
+#define SYS_AXI_SYX2DMSCR	0xFF802004
+#define SYS_AXI_AX2MDMSCR	0xFF802004
+#define SYS_AXI_CC50DMSCR	0xFF802008
+#define SYS_AXI_CC51DMSCR	0xFF80200C
+#define SYS_AXI_CCIDMSCR	0xFF802010
+#define SYS_AXI_CSDMSCR		0xFF802014
+#define SYS_AXI_DDMDMSCR	0xFF802018
+#define SYS_AXI_ETHDMSCR	0xFF80201C
+#define SYS_AXI_G2DDMSCR	0xFF802020
+#define SYS_AXI_IMP0DMSCR	0xFF802024
+#define SYS_AXI_IMP1DMSCR	0xFF802028
+#define SYS_AXI_LBSDMSCR	0xFF80202C
+#define SYS_AXI_MMUDSDMSCR	0xFF802030
+#define SYS_AXI_MMUMXDMSCR	0xFF802034
+#define SYS_AXI_MMURDDMSCR	0xFF802038
+#define SYS_AXI_MMUS0DMSCR	0xFF80203C
+#define SYS_AXI_MMUS1DMSCR	0xFF802040
+#define SYS_AXI_MPXDMSCR	0xFF802044
+#define SYS_AXI_MTSB0DMSCR	0xFF802048
+#define SYS_AXI_MTSB1DMSCR	0xFF80204C
+#define SYS_AXI_PCIDMSCR	0xFF802050
+#define SYS_AXI_RTXDMSCR	0xFF802054
+#define SYS_AXI_SAT0DMSCR	0xFF802058
+#define SYS_AXI_SAT1DMSCR	0xFF80205C
+#define SYS_AXI_SDM0DMSCR	0xFF802060
+#define SYS_AXI_SDM1DMSCR	0xFF802064
+#define SYS_AXI_SDS0DMSCR	0xFF802068
+#define SYS_AXI_SDS1DMSCR	0xFF80206C
+#define SYS_AXI_ETRABDMSCR	0xFF802070
+#define SYS_AXI_ETRKFDMSCR	0xFF802074
+#define SYS_AXI_UDM0DMSCR	0xFF802078
+#define SYS_AXI_UDM1DMSCR	0xFF80207C
+#define SYS_AXI_USB20DMSCR	0xFF802080
+#define SYS_AXI_USB21DMSCR	0xFF802084
+#define SYS_AXI_USB22DMSCR	0xFF802088
+#define SYS_AXI_USB30DMSCR	0xFF80208C
+#define SYS_AXI_X128TO64SLVDMSCR	0xFF802100
+#define SYS_AXI_X64TO128SLVDMSCR	0xFF802104
+#define SYS_AXI_AVBSLVDMSCR	0xFF802108
+#define SYS_AXI_SYX2SLVDMSCR	0xFF80210C
+#define SYS_AXI_AX2SLVDMSCR	0xFF80210C
+#define SYS_AXI_ETHSLVDMSCR	0xFF802110
+#define SYS_AXI_GICSLVDMSCR	0xFF802114
+#define SYS_AXI_IMPSLVDMSCR	0xFF802118
+#define SYS_AXI_IMX0SLVDMSCR	0xFF80211C
+#define SYS_AXI_IMX1SLVDMSCR	0xFF802120
+#define SYS_AXI_IMX2SLVDMSCR	0xFF802124
+#define SYS_AXI_LBSSLVDMSCR	0xFF802128
+#define SYS_AXI_MMC0SLVDMSCR	0xFF80212C
+#define SYS_AXI_MMC1SLVDMSCR	0xFF802130
+#define SYS_AXI_MPXSLVDMSCR	0xFF802134
+#define SYS_AXI_MTSB0SLVDMSCR	0xFF802138
+#define SYS_AXI_MTSB1SLVDMSCR	0xFF80213C
+#define SYS_AXI_MXTSLVDMSCR	0xFF802140
+#define SYS_AXI_PCISLVDMSCR	0xFF802144
+#define SYS_AXI_SYAPBSLVDMSCR	0xFF802148
+#define SYS_AXI_QSAPBSLVDMSCR	0xFF80214C
+#define SYS_AXI_RTXSLVDMSCR	0xFF802150
+#define SYS_AXI_SAPC1SLVDMSCR	0xFF802154
+#define SYS_AXI_SAPC2SLVDMSCR	0xFF802158
+#define SYS_AXI_SAPC3SLVDMSCR	0xFF80215C
+#define SYS_AXI_SAPC65SLVDMSCR	0xFF802160
+#define SYS_AXI_SAPC8SLVDMSCR	0xFF802164
+#define SYS_AXI_SAT0SLVDMSCR	0xFF802168
+#define SYS_AXI_SAT1SLVDMSCR	0xFF80216C
+#define SYS_AXI_SDAP0SLVDMSCR	0xFF802170
+#define SYS_AXI_SDAP1SLVDMSCR	0xFF802174
+#define SYS_AXI_SDAP2SLVDMSCR	0xFF802178
+#define SYS_AXI_SDAP3SLVDMSCR	0xFF80217C
+#define SYS_AXI_SGXSLVDMSCR	0xFF802180
+#define SYS_AXI_SGXSLV1SLVDMSCR	0xFF802184
+#define SYS_AXI_STBSLVDMSCR	0xFF802188
+#define SYS_AXI_STMSLVDMSCR	0xFF80218C
+#define SYS_AXI_SYXXDEFAULTSLAVESLVDMSCR	0xFF802190
+#define SYS_AXI_TSPL0SLVDMSCR	0xFF802194
+#define SYS_AXI_TSPL1SLVDMSCR	0xFF802198
+#define SYS_AXI_TSPL2SLVDMSCR	0xFF80219C
+#define SYS_AXI_USB20SLVDMSCR	0xFF8021A0
+#define SYS_AXI_USB21SLVDMSCR	0xFF8021A4
+#define SYS_AXI_USB22SLVDMSCR	0xFF8021A8
+#define SYS_AXI_USB30SLVDMSCR	0xFF8021AC
+#define SYS_AXI_UTLBDSSLVDMSCR	0xFF8021B0
+#define SYS_AXI_UTLBS0SLVDMSCR	0xFF8021B4
+#define SYS_AXI_UTLBS1SLVDMSCR	0xFF8021B8
+#define	SYS_AXI_ROT0DMSCR	0xFF802320
+#define	SYS_AXI_ROT1DMSCR	0xFF802324
+#define	SYS_AXI_ROT2DMSCR	0xFF802328
+#define	SYS_AXI_ROT3DMSCR	0xFF80232C
+#define	SYS_AXI_ROT4DMSCR	0xFF802330
+#define	SYS_AXI_IMUX3SLVDMSCR	0xFF802334
+#define	SYS_AXI_STBR0SLVDMSCR	0xFF803200
+#define	SYS_AXI_STBR0PSLVDMSCR	0xFF803204
+#define	SYS_AXI_STBR0XSLVDMSCR	0xFF803208
+#define	SYS_AXI_STBR1SLVDMSCR	0xFF803210
+#define	SYS_AXI_STBR1PSLVDMSCR	0xFF803214
+#define	SYS_AXI_STBR1XSLVDMSCR	0xFF803218
+#define	SYS_AXI_STBR2SLVDMSCR	0xFF803220
+#define	SYS_AXI_STBR2PSLVDMSCR	0xFF803224
+#define	SYS_AXI_STBR2XSLVDMSCR	0xFF803228
+#define	SYS_AXI_STBR3SLVDMSCR	0xFF803230
+#define	SYS_AXI_STBR3PSLVDMSCR	0xFF803234
+#define	SYS_AXI_STBR3XSLVDMSCR	0xFF803238
+#define	SYS_AXI_STBR4SLVDMSCR	0xFF803240
+#define	SYS_AXI_STBR4PSLVDMSCR	0xFF803244
+#define	SYS_AXI_STBR4XSLVDMSCR	0xFF803248
+#define	SYS_AXI_ADM_DMSCR	0xFF803260
+#define	SYS_AXI_ADS_DMSCR	0xFF803264
+
+#define RT_AXI_CBMDMSCR		0xFF812000
+#define RT_AXI_DBDMSCR		0xFF812004
+#define RT_AXI_RDMDMSCR		0xFF812008
+#define RT_AXI_RDSDMSCR		0xFF81200C
+#define RT_AXI_STRDMSCR		0xFF812010
+#define RT_AXI_SY2RTDMSCR	0xFF812014
+#define RT_AXI_CBSSLVDMSCR	0xFF812100
+#define RT_AXI_DBSSLVDMSCR	0xFF812104
+#define RT_AXI_RTAP1SLVDMSCR	0xFF812108
+#define RT_AXI_RTAP2SLVDMSCR	0xFF81210C
+#define RT_AXI_RTAP3SLVDMSCR	0xFF812110
+#define RT_AXI_RT2SYSLVDMSCR	0xFF812114
+#define RT_AXI_A128TO64SLVDMSCR	0xFF812118
+#define RT_AXI_A64TO128SLVDMSCR	0xFF81211C
+#define RT_AXI_A64TO128CSLVDMSCR	0xFF812120
+#define RT_AXI_UTLBRSLVDMSCR	0xFF812128
+
+#define MP_AXI_ADSPDMSCR	0xFF822000
+#define MP_AXI_ASDM0DMSCR	0xFF822004
+#define MP_AXI_ASDM1DMSCR	0xFF822008
+#define MP_AXI_ASDS0DMSCR	0xFF82200C
+#define MP_AXI_ASDS1DMSCR	0xFF822010
+#define MP_AXI_MLPDMSCR		0xFF822014
+#define MP_AXI_MMUMPDMSCR	0xFF822018
+#define MP_AXI_SPUDMSCR		0xFF82201C
+#define MP_AXI_SPUCDMSCR	0xFF822020
+#define MP_AXI_SY2MPDMSCR	0xFF822024
+#define MP_AXI_ADSPSLVDMSCR	0xFF822100
+#define MP_AXI_MLMSLVDMSCR	0xFF822104
+#define MP_AXI_MPAP4SLVDMSCR	0xFF822108
+#define MP_AXI_MPAP5SLVDMSCR	0xFF82210C
+#define MP_AXI_MPAP6SLVDMSCR	0xFF822110
+#define MP_AXI_MPAP7SLVDMSCR	0xFF822114
+#define MP_AXI_MP2SYSLVDMSCR	0xFF822118
+#define MP_AXI_MP2SY2SLVDMSCR	0xFF82211C
+#define MP_AXI_MPXAPSLVDMSCR	0xFF822124
+#define MP_AXI_SPUSLVDMSCR	0xFF822128
+#define MP_AXI_UTLBMPSLVDMSCR	0xFF82212C
+
+#define ADM_AXI_ASDM0DMSCR	0xFF842000
+#define ADM_AXI_ASDM1DMSCR	0xFF842004
+#define ADM_AXI_MPAP1SLVDMSCR	0xFF842104
+#define ADM_AXI_MPAP2SLVDMSCR	0xFF842108
+#define ADM_AXI_MPAP3SLVDMSCR	0xFF84210C
+
+#define	DM_AXI_DMAXICONF	0xFF850000
+#define	DM_AXI_DMAPBCONF	0xFF850004
+#define	DM_AXI_DMADMCONF	0xFF850020
+#define	DM_AXI_DMSDM0CONF	0xFF850024
+#define	DM_AXI_DMSDM1CONF	0xFF850028
+#define	DM_AXI_DMQSPAPSLVCONF	0xFF850030
+#define	DM_AXI_RAPD4SLVCONF	0xFF850034
+#define	DM_AXI_SAPD4SLVCONF	0xFF85003C
+#define	DM_AXI_SAPD5SLVCONF	0xFF850040
+#define	DM_AXI_SAPD6SLVCONF	0xFF850044
+#define	DM_AXI_SAPD65DSLVCONF	0xFF850048
+#define	DM_AXI_SDAP0SLVCONF	0xFF85004C
+#define	DM_AXI_MAPD2SLVCONF	0xFF850050
+#define	DM_AXI_MAPD3SLVCONF	0xFF850054
+#define	DM_AXI_DMXXDEFAULTSLAVESLVCONF	0xFF850058
+#define	DM_AXI_DMADMRQOSCONF	0xFF850100
+#define	DM_AXI_DMADMRQOSCTSET0	0xFF850104
+#define	DM_AXI_DMADMRQOSREQCTR	0xFF850114
+#define	DM_AXI_DMADMRQOSQON	0xFF850124
+#define	DM_AXI_DMADMRQOSIN	0xFF850128
+#define	DM_AXI_DMADMRQOSSTAT	0xFF85012C
+#define	DM_AXI_DMSDM0RQOSCONF	0xFF850140
+#define	DM_AXI_DMSDM0RQOSCTSET0	0xFF850144
+#define	DM_AXI_DMSDM0RQOSREQCTR	0xFF850154
+#define	DM_AXI_DMSDM0RQOSQON	0xFF850164
+#define	DM_AXI_DMSDM0RQOSIN	0xFF850168
+#define	DM_AXI_DMSDM0RQOSSTAT	0xFF85016C
+#define	DM_AXI_DMSDM1RQOSCONF	0xFF850180
+#define	DM_AXI_DMSDM1RQOSCTSET0	0xFF850184
+#define	DM_AXI_DMSDM1RQOSREQCTR	0xFF850194
+#define	DM_AXI_DMSDM1RQOSQON	0xFF8501A4
+#define	DM_AXI_DMSDM1RQOSIN	0xFF8501A8
+#define	DM_AXI_DMSDM1RQOSSTAT	0xFF8501AC
+#define	DM_AXI_DMRQOSCTSET1	0xFF850FC0
+#define	DM_AXI_DMRQOSCTSET2	0xFF850FC4
+#define	DM_AXI_DMRQOSCTSET3	0xFF850FC8
+#define	DM_AXI_DMRQOSTHRES0	0xFF850FCC
+#define	DM_AXI_DMRQOSTHRES1	0xFF850FD0
+#define	DM_AXI_DMRQOSTHRES2	0xFF850FD4
+#define	DM_AXI_DMADMWQOSCONF	0xFF851100
+#define	DM_AXI_DMADMWQOSCTSET0	0xFF851104
+#define	DM_AXI_DMADMWQOSREQCTR	0xFF851114
+#define	DM_AXI_DMADMWQOSQON	0xFF851124
+#define	DM_AXI_DMADMWQOSIN	0xFF851128
+#define	DM_AXI_DMADMWQOSSTAT	0xFF85112C
+#define	DM_AXI_DMSDM0WQOSCONF	0xFF851140
+#define	DM_AXI_DMSDM0WQOSCTSET0	0xFF851144
+#define	DM_AXI_DMSDM0WQOSREQCTR	0xFF851154
+#define	DM_AXI_DMSDM0WQOSQON	0xFF851164
+#define	DM_AXI_DMSDM0WQOSIN	0xFF851168
+#define	DM_AXI_DMSDM0WQOSSTAT	0xFF85116C
+#define	DM_AXI_DMSDM1WQOSCONF	0xFF851180
+#define	DM_AXI_DMSDM1WQOSCTSET0	0xFF851184
+#define	DM_AXI_DMSDM1WQOSREQCTR	0xFF851194
+#define	DM_AXI_DMSDM1WQOSQON	0xFF8511A4
+#define	DM_AXI_DMSDM1WQOSIN	0xFF8511A8
+#define	DM_AXI_DMSDM1WQOSSTAT	0xFF8511AC
+#define	DM_AXI_DMWQOSCTSET1	0xFF851FC0
+#define	DM_AXI_DMWQOSCTSET2	0xFF851FC4
+#define	DM_AXI_DMWQOSCTSET3	0xFF851FC8
+#define	DM_AXI_DMWQOSTHRES0	0xFF851FCC
+#define	DM_AXI_DMWQOSTHRES1	0xFF851FD0
+#define	DM_AXI_DMWQOSTHRES2	0xFF851FD4
+
+#define DM_AXI_RDMDMSCR		0xFF852000
+#define DM_AXI_SDM0DMSCR	0xFF852004
+#define DM_AXI_SDM1DMSCR	0xFF852008
+#if defined(CONFIG_R8A7792)
+#define	DM_AXI_DMQSPAPSLVDMSCR	0xFF852104
+#define	DM_AXI_RAPD4SLVDMSCR	0xFF852108
+#define	DM_AXI_SAPD4SLVDMSCR	0xFF852110
+#define	DM_AXI_SAPD5SLVDMSCR	0xFF852114
+#define	DM_AXI_SAPD6SLVDMSCR	0xFF852118
+#define	DM_AXI_SAPD65DSLVDMSCR	0xFF85211C
+#define	DM_AXI_SDAP0SLVDMSCR	0xFF852120
+#define	DM_AXI_MAPD2SLVDMSCR	0xFF852124
+#define	DM_AXI_MAPD3SLVDMSCR	0xFF852128
+#define	DM_AXI_DMXXDEFAULTSLAVESLVDMSCR	0xFF85212C
+#define	DM_AXI_DMXREGDMSENN	0xFF852200
+#else
+#define DM_AXI_MMAP0SLVDMSCR	0xFF852100
+#define DM_AXI_MMAP1SLVDMSCR	0xFF852104
+#define DM_AXI_QSPAPSLVDMSCR	0xFF852108
+#define DM_AXI_RAP4SLVDMSCR	0xFF85210C
+#define DM_AXI_RAP5SLVDMSCR	0xFF852110
+#define DM_AXI_SAP4SLVDMSCR	0xFF852114
+#define DM_AXI_SAP5SLVDMSCR	0xFF852118
+#define DM_AXI_SAP6SLVDMSCR	0xFF85211C
+#define DM_AXI_SAP65SLVDMSCR	0xFF852120
+#define DM_AXI_SDAP0SLVDMSCR	0xFF852124
+#define DM_AXI_SDAP1SLVDMSCR	0xFF852128
+#define DM_AXI_SDAP2SLVDMSCR	0xFF85212C
+#define DM_AXI_SDAP3SLVDMSCR	0xFF852130
+#endif
+
+#define SYS_AXI256_SYXDMSCR	0xFF862000
+#define SYS_AXI256_MPXDMSCR	0xFF862004
+#define SYS_AXI256_MXIDMSCR	0xFF862008
+#define SYS_AXI256_X128TO256SLVDMSCR	0xFF862100
+#define SYS_AXI256_X256TO128SLVDMSCR	0xFF862104
+#define SYS_AXI256_SYXSLVDMSCR	0xFF862108
+#define SYS_AXI256_CCXSLVDMSCR	0xFF86210C
+#define SYS_AXI256_S3CSLVDMSCR	0xFF862110
+
+#define MXT_SYXDMSCR		0xFF872000
+#if defined(CONFIG_R8A7792)
+#define	MXT_IMRSLVDMSCR		0xFF872110
+#define	MXT_VINSLVDMSCR		0xFF872114
+#define	MXT_VSP1SLVDMSCR	0xFF87211C
+#define	MXT_VSPD0SLVDMSCR	0xFF872120
+#define	MXT_VSPD1SLVDMSCR	0xFF872124
+#define	MXT_MAP1SLVDMSCR	0xFF872128
+#define	MXT_MAP2SLVDMSCR	0xFF87212C
+#define	MXT_MAP2BSLVDMSCR	0xFF872134
+#else	/* R8A7792 */
+#define MXT_CMM0SLVDMSCR	0xFF872100
+#define MXT_CMM1SLVDMSCR	0xFF872104
+#define MXT_CMM2SLVDMSCR	0xFF872108
+#define MXT_FDPSLVDMSCR		0xFF87210C
+#define MXT_IMRSLVDMSCR		0xFF872110
+#define MXT_VINSLVDMSCR		0xFF872114
+#define MXT_VPC0SLVDMSCR	0xFF872118
+#define MXT_VPC1SLVDMSCR	0xFF87211C
+#define MXT_VSP0SLVDMSCR	0xFF872120
+#define MXT_VSP1SLVDMSCR	0xFF872124
+#define MXT_VSPD0SLVDMSCR	0xFF872128
+#define MXT_VSPD1SLVDMSCR	0xFF87212C
+#define MXT_MAP1SLVDMSCR	0xFF872130
+#define MXT_MAP2SLVDMSCR	0xFF872134
+#endif	/* R8A7792 */
+
+/* DMS Register (MXI) */
+#if defined(CONFIG_R8A7792)
+#define	MXI_JPURDMSCR		0xFE964200
+#define	MXI_JPUWDMSCR		0xFE966200
+#define	MXI_VCTU0RDMSCR		0xFE964600
+#define	MXI_VCTU0WDMSCR		0xFE966600
+#define	MXI_VDCTU0RDMSCR	0xFE964604
+#define	MXI_VDCTU0WDMSCR	0xFE966604
+#define	MXI_VDCTU1RDMSCR	0xFE964608
+#define	MXI_VDCTU1WDMSCR	0xFE966608
+#define	MXI_VIN0WDMSCR		0xFE967608
+#define	MXI_VIN1WDMSCR		0xFE966E08
+#define	MXI_RDRWDMSCR		0xFE96760C
+#define	MXI_IMS01RDMSCR		0xFE965600
+#define	MXI_IMS01WDMSCR		0xFE967600
+#define	MXI_IMS23RDMSCR		0xFE965604
+#define	MXI_IMS23WDMSCR		0xFE967604
+#define	MXI_IMS45RDMSCR		0xFE964E00
+#define	MXI_IMS45WDMSCR		0xFE966E00
+#define	MXI_IMRRDMSCR		0xFE964E04
+#define	MXI_IMRWDMSCR		0xFE966E04
+#define	MXI_ROTCE4RDMSCR	0xFE965200
+#define	MXI_ROTCE4WDMSCR	0xFE967200
+#define	MXI_ROTVLC4RDMSCR	0xFE965204
+#define	MXI_ROTVLC4WDMSCR	0xFE967204
+#define	MXI_VSPD0RDMSCR		0xFE964A00
+#define	MXI_VSPD0WDMSCR		0xFE966A00
+#define	MXI_VSPD1RDMSCR		0xFE964A04
+#define	MXI_VSPD1WDMSCR		0xFE966A04
+#define	MXI_DU0RDMSCR		0xFE964A08
+#define	MXI_DU0WDMSCR		0xFE966A08
+#define	MXI_VSP0RDMSCR		0xFE964A0C
+#define	MXI_VSP0WDMSCR		0xFE966A0C
+#define	MXI_ROTCE0RDMSCR	0xFE965A00
+#define	MXI_ROTCE0WDMSCR	0xFE967A00
+#define	MXI_ROTVLC0RDMSCR	0xFE965A04
+#define	MXI_ROTVLC0WDMSCR	0xFE967A04
+#define	MXI_ROTCE1RDMSCR	0xFE965A08
+#define	MXI_ROTCE1WDMSCR	0xFE967A08
+#define	MXI_ROTVLC1RDMSCR	0xFE965A0C
+#define	MXI_ROTVLC1WDMSCR	0xFE967A0C
+#define	MXI_ROTCE2RDMSCR	0xFE965E00
+#define	MXI_ROTCE2WDMSCR	0xFE967E00
+#define	MXI_ROTVLC2RDMSCR	0xFE965E04
+#define	MXI_ROTVLC2WDMSCR	0xFE967E04
+#define	MXI_ROTCE3RDMSCR	0xFE965E08
+#define	MXI_ROTCE3WDMSCR	0xFE967E08
+#define	MXI_ROTVLC3RDMSCR	0xFE965E0C
+#define	MXI_ROTVLC3WDMSCR	0xFE967E0C
+#endif	/* R8A7792 */
+
+#define CCI_AXI_MMUS0DMSCR	0xFF882000
+#define CCI_AXI_SYX2DMSCR	0xFF882004
+#define CCI_AXI_MMURDMSCR	0xFF882008
+#define CCI_AXI_MMUDSDMSCR	0xFF88200C
+#define CCI_AXI_MMUMDMSCR	0xFF882010
+#define CCI_AXI_MXIDMSCR	0xFF882014
+#define CCI_AXI_MMUS1DMSCR	0xFF882018
+#define CCI_AXI_MMUMPDMSCR	0xFF88201C
+#define CCI_AXI_DVMDMSCR	0xFF882020
+#define CCI_AXI_CCISLVDMSCR	0xFF882100
+
+#define CCI_AXI_IPMMUIDVMCR	0xFF880400
+#define CCI_AXI_IPMMURDVMCR	0xFF880404
+#define CCI_AXI_IPMMUS0DVMCR	0xFF880408
+#define CCI_AXI_IPMMUS1DVMCR	0xFF88040C
+#define CCI_AXI_IPMMUMPDVMCR	0xFF880410
+#define CCI_AXI_IPMMUDSDVMCR	0xFF880414
+#define CCI_AXI_AX2ADDRMASK	0xFF88041C
+
+#define PLL0CR			0xE61500D8
+#define PLL0_STC_MASK		0x7F000000
+#define PLL0_STC_BIT		24
+#define PLLECR			0xE61500D0
+#define PLL0ST			0x100
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct rcar_rwdt {
+	u32 rwtcnt;	/* 0x00 */
+	u32 rwtcsra;	/* 0x04 */
+	u16 rwtcsrb;	/* 0x08 */
+};
+
+/* SWDT */
+struct rcar_swdt {
+	u32 swtcnt;	/* 0x00 */
+	u32 swtcsra;	/* 0x04 */
+	u16 swtcsrb;	/* 0x08 */
+};
+
+/* LBSC */
+struct rcar_lbsc {
+	u32 cs0ctrl;
+	u32 cs1ctrl;
+	u32 ecs0ctrl;
+	u32 ecs1ctrl;
+	u32 ecs2ctrl;
+	u32 ecs3ctrl;
+	u32 ecs4ctrl;
+	u32 ecs5ctrl;
+	u32 dummy0[4];	/* 0x20 .. 0x2C */
+	u32 cswcr0;
+	u32 cswcr1;
+	u32 ecswcr0;
+	u32 ecswcr1;
+	u32 ecswcr2;
+	u32 ecswcr3;
+	u32 ecswcr4;
+	u32 ecswcr5;
+	u32 exdmawcr0;
+	u32 exdmawcr1;
+	u32 exdmawcr2;
+	u32 dummy1[9];	/* 0x5C .. 0x7C */
+	u32 cspwcr0;
+	u32 cspwcr1;
+	u32 ecspwcr0;
+	u32 ecspwcr1;
+	u32 ecspwcr2;
+	u32 ecspwcr3;
+	u32 ecspwcr4;
+	u32 ecspwcr5;
+	u32 exwtsync;
+	u32 dummy2[3];	/* 0xA4 .. 0xAC */
+	u32 cs0bstctl;
+	u32 cs0btph;
+	u32 dummy3[2];	/* 0xB8 .. 0xBC */
+	u32 cs1gdst;
+	u32 ecs0gdst;
+	u32 ecs1gdst;
+	u32 ecs2gdst;
+	u32 ecs3gdst;
+	u32 ecs4gdst;
+	u32 ecs5gdst;
+	u32 dummy4[5];	/* 0xDC .. 0xEC */
+	u32 exdmaset0;
+	u32 exdmaset1;
+	u32 exdmaset2;
+	u32 dummy5[5];	/* 0xFC .. 0x10C */
+	u32 exdmcr0;
+	u32 exdmcr1;
+	u32 exdmcr2;
+	u32 dummy6[5];	/* 0x11C .. 0x12C */
+	u32 bcintsr;
+	u32 bcintcr;
+	u32 bcintmr;
+	u32 dummy7;	/* 0x13C */
+	u32 exbatlv;
+	u32 exwtsts;
+	u32 dummy8[14];	/* 0x148 .. 0x17C */
+	u32 atacsctrl;
+	u32 dummy9[15]; /* 0x184 .. 0x1BC */
+	u32 exbct;
+	u32 extct;
+};
+
+/* DBSC3 */
+struct rcar_dbsc3 {
+	u32 dummy0[3];	/* 0x00 .. 0x08 */
+	u32 dbstate1;
+	u32 dbacen;
+	u32 dbrfen;
+	u32 dbcmd;
+	u32 dbwait;
+	u32 dbkind;
+	u32 dbconf0;
+	u32 dummy1[2];	/* 0x28 .. 0x2C */
+	u32 dbphytype;
+	u32 dummy2[3];	/* 0x34 .. 0x3C */
+	u32 dbtr0;
+	u32 dbtr1;
+	u32 dbtr2;
+	u32 dummy3;	/* 0x4C */
+	u32 dbtr3;
+	u32 dbtr4;
+	u32 dbtr5;
+	u32 dbtr6;
+	u32 dbtr7;
+	u32 dbtr8;
+	u32 dbtr9;
+	u32 dbtr10;
+	u32 dbtr11;
+	u32 dbtr12;
+	u32 dbtr13;
+	u32 dbtr14;
+	u32 dbtr15;
+	u32 dbtr16;
+	u32 dbtr17;
+	u32 dbtr18;
+	u32 dbtr19;
+	u32 dummy4[7];	/* 0x94 .. 0xAC */
+	u32 dbbl;
+	u32 dummy5[3];	/* 0xB4 .. 0xBC */
+	u32 dbadj0;
+	u32 dummy6;	/* 0xC4 */
+	u32 dbadj2;
+	u32 dummy7[5];	/* 0xCC .. 0xDC */
+	u32 dbrfcnf0;
+	u32 dbrfcnf1;
+	u32 dbrfcnf2;
+	u32 dummy8[2];	/* 0xEC .. 0xF0 */
+	u32 dbcalcnf;
+	u32 dbcaltr;
+	u32 dummy9;	/* 0xFC */
+	u32 dbrnk0;
+	u32 dummy10[31];	/* 0x104 .. 0x17C */
+	u32 dbpdncnf;
+	u32 dummy11[47];	/* 0x184 ..0x23C */
+	u32 dbdfistat;
+	u32 dbdficnt;
+	u32 dummy12[14];	/* 0x248 .. 0x27C */
+	u32 dbpdlck;
+	u32 dummy13[3];	/* 0x284 .. 0x28C */
+	u32 dbpdrga;
+	u32 dummy14[3];	/* 0x294 .. 0x29C */
+	u32 dbpdrgd;
+	u32 dummy15[24];	/* 0x2A4 .. 0x300 */
+	u32 dbbs0cnt1;
+	u32 dummy16[30];	/* 0x308 .. 0x37C */
+	u32 dbwt0cnf0;
+	u32 dbwt0cnf1;
+	u32 dbwt0cnf2;
+	u32 dbwt0cnf3;
+	u32 dbwt0cnf4;
+	u32 dummy17[27];	/* 0x394 .. 0x3FC */
+	u32 dbeccmode;
+	u32 dummy18[3];		/* 0x404 .. 0x40C */
+	u32 dbeccarea0;
+	u32 dbeccarea1;
+	u32 dbeccarea2;
+	u32 dbeccarea3;
+	u32 dummy19[4];		/* 0x420 .. 0x42C */
+	u32 dbeccintenable;
+	u32 dbeccintdetect;
+	u32 dummy20[22];	/* 0x438 .. 0x48C */
+	u32 dbeccmodulcnt;
+	u32 dummy21[27];	/* 0x494 .. 0x4FC */
+	u32 dbschecnt0;
+	u32 dummy22[63];	/* 0x504 .. 0x5FC */
+	u32 dbreradr0;
+	u32 dbreblane0;
+	u32 dbrerid0;
+	u32 dbrerinfo0;
+	u32 dbureradr0;
+	u32 dbureblane0;
+	u32 dburerid0;
+	u32 dburerinfo0;
+	u32 dbreradr1;
+	u32 dbreblane1;
+	u32 dbrerid1;
+	u32 dbrerinfo1;
+	u32 dbureradr1;
+	u32 dbureblane1;
+	u32 dburerid1;
+	u32 dburerinfo1;
+	u32 dbreradr2;
+	u32 dbreblane2;
+	u32 dbrerid2;
+	u32 dbrerinfo2;
+	u32 dbureradr2;
+	u32 dbureblane2;
+	u32 dburerid2;
+	u32 dburerinfo2;
+	u32 dbreradr3;
+	u32 dbreblane3;
+	u32 dbrerid3;
+	u32 dbrerinfo3;
+	u32 dbureradr3;
+	u32 dbureblane3;
+	u32 dburerid3;
+	u32 dburerinfo3;
+	u32 dummy23[160];	/* 0x680 .. 0x8FC */
+	u32 dbpccr;
+	u32 dbpeier;
+	u32 dbpeisr;
+	u32 dummy24;
+	u32 dbwdpesr0;
+	u32 dbwspesr0;
+	u32 dbpwear0;
+	u32 dbpweid0;
+	u32 dbpweinfo0;
+	u32 dummy25[3];		/* 0x924 .. 0x92C */
+	u32 dbwdpesr1;
+	u32 dbwspesr1;
+	u32 dbpwear1;
+	u32 dbpweid1;
+	u32 dbpweinfo1;
+	u32 dummy26[3];		/* 0x944 .. 0x94C */
+	u32 dbwdpesr2;
+	u32 dbwspesr2;
+	u32 dbpwear2;
+	u32 dbpweid2;
+	u32 dbpweinfo2;
+	u32 dummy27[3];		/* 0x964 .. 0x96C */
+	u32 dbwdpesr3;
+	u32 dbwspesr3;
+	u32 dbpwear3;
+	u32 dbpweid3;
+	u32 dbpweinfo3;
+};
+
+/* GPIO */
+struct rcar_gpio {
+	u32 iointsel;
+	u32 inoutsel;
+	u32 outdt;
+	u32 indt;
+	u32 intdt;
+	u32 intclr;
+	u32 intmsk;
+	u32 posneg;
+	u32 edglevel;
+	u32 filonoff;
+	u32 intmsks;
+	u32 mskclrs;
+	u32 outdtsel;
+	u32 outdth;
+	u32 outdtl;
+	u32 bothedge;
+};
+
+/* S3C(QoS) */
+struct rcar_s3c {
+	u32 s3cexcladdmsk;
+	u32 s3cexclidmsk;
+	u32 s3cadsplcr;
+	u32 s3cmaar;
+	u32 s3carcr11;
+	u32 s3crorr;
+	u32 s3cworr;
+	u32 s3carcr22;
+	u32 dummy1[2];	/* 0x20 .. 0x24 */
+	u32 s3cmctr;
+	u32 dummy2;	/* 0x2C */
+	u32 cconf0;
+	u32 cconf1;
+	u32 cconf2;
+	u32 cconf3;
+};
+
+struct rcar_s3c_qos {
+	u32 s3cqos0;
+	u32 s3cqos1;
+	u32 s3cqos2;
+	u32 s3cqos3;
+	u32 s3cqos4;
+	u32 s3cqos5;
+	u32 s3cqos6;
+	u32 s3cqos7;
+	u32 s3cqos8;
+};
+
+/* DBSC(QoS) */
+struct rcar_dbsc3_qos {
+	u32 dblgcnt;
+	u32 dbtmval0;
+	u32 dbtmval1;
+	u32 dbtmval2;
+	u32 dbtmval3;
+	u32 dbrqctr;
+	u32 dbthres0;
+	u32 dbthres1;
+	u32 dbthres2;
+	u32 dummy0;	/* 0x24 */
+	u32 dblgqon;
+};
+
+/* MXI(QoS) */
+struct rcar_mxi {
+	u32 mxsaar0;
+	u32 mxsaar1;
+	u32 dummy0[7];	/* 0x08 .. 0x20 */
+	u32 mxaxiracr;	/* R8a7790 only */
+	u32 mxs3cracr;
+	u32 dummy1[2];	/* 0x2C .. 0x30 */
+	u32 mxaxiwacr;	/* R8a7790 only */
+	u32 mxs3cwacr;
+	u32 dummy2;	/* 0x3C */
+	u32 mxrtcr;
+	u32 mxwtcr;
+	u32 mxaxirtcr;	/* R8a7792 only */
+	u32 mxaxiwtcr;
+	u32 mxs3crtcr;
+	u32 mxs3cwtcr;
+};
+
+struct rcar_mxi_qos {
+	u32 vspdu0;
+	u32 vspdu1;
+	u32 du0;
+	u32 du1;
+};
+
+/* AXI(QoS) */
+struct rcar_axi_qos {
+	u32 qosconf;
+	u32 qosctset0;
+	u32 qosctset1;
+	u32 qosctset2;
+	u32 qosctset3;
+	u32 qosreqctr;
+	u32 qosthres0;
+	u32 qosthres1;
+	u32 qosthres2;
+	u32 qosqon;
+	u32 qosin;
+};
+
+#endif
+
+#endif /* __ASM_ARCH_RCAR_BASE_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h
new file mode 100644
index 000000000..5cd8a8c78
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ./arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ */
+
+#ifndef __ASM_ARCH_RCAR_GEN3_BASE_H
+#define __ASM_ARCH_RCAR_GEN3_BASE_H
+
+/*
+ * R-Car (R8A7750) I/O Addresses
+ */
+#define RWDT_BASE		0xE6020000
+#define SWDT_BASE		0xE6030000
+#define LBSC_BASE		0xEE220200
+#define TMU_BASE		0xE61E0000
+#define GPIO5_BASE		0xE6055000
+
+/* SCIF */
+#define SCIF0_BASE		0xE6E60000
+#define SCIF1_BASE		0xE6E68000
+#define SCIF2_BASE		0xE6E88000
+#define SCIF3_BASE		0xE6C50000
+#define SCIF4_BASE		0xE6C40000
+#define SCIF5_BASE		0xE6F30000
+
+/* Module stop status register */
+#define MSTPSR0			0xE6150030
+#define MSTPSR1			0xE6150038
+#define MSTPSR2			0xE6150040
+#define MSTPSR3			0xE6150048
+#define MSTPSR4			0xE615004C
+#define MSTPSR5			0xE615003C
+#define MSTPSR6			0xE61501C0
+#define MSTPSR7			0xE61501C4
+#define MSTPSR8			0xE61509A0
+#define MSTPSR9			0xE61509A4
+#define MSTPSR10		0xE61509A8
+#define MSTPSR11		0xE61509AC
+
+/* Realtime module stop control register */
+#define RMSTPCR0		0xE6150110
+#define RMSTPCR1		0xE6150114
+#define RMSTPCR2		0xE6150118
+#define RMSTPCR3		0xE615011C
+#define RMSTPCR4		0xE6150120
+#define RMSTPCR5		0xE6150124
+#define RMSTPCR6		0xE6150128
+#define RMSTPCR7		0xE615012C
+#define RMSTPCR8		0xE6150980
+#define RMSTPCR9		0xE6150984
+#define RMSTPCR10		0xE6150988
+#define RMSTPCR11		0xE615098C
+
+/* System module stop control register */
+#define SMSTPCR0		0xE6150130
+#define SMSTPCR1		0xE6150134
+#define SMSTPCR2		0xE6150138
+#define SMSTPCR3		0xE615013C
+#define SMSTPCR4		0xE6150140
+#define SMSTPCR5		0xE6150144
+#define SMSTPCR6		0xE6150148
+#define SMSTPCR7		0xE615014C
+#define SMSTPCR8		0xE6150990
+#define SMSTPCR9		0xE6150994
+#define SMSTPCR10		0xE6150998
+#define SMSTPCR11		0xE615099C
+
+/* PFC */
+#define PFC_PUEN5	0xE6060414
+#define PUEN_SSI_SDATA4	BIT(17)
+#define PFC_PUEN6       0xE6060418
+#define PUEN_USB1_OVC   (1 << 2)
+#define PUEN_USB1_PWEN  (1 << 1)
+
+/* IICDVFS (I2C) */
+#define CONFIG_SYS_I2C_SH_BASE0	0xE60B0000
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <linux/bitops.h>
+
+/* RWDT */
+struct rcar_rwdt {
+	u32 rwtcnt;
+	u32 rwtcsra;
+	u32 rwtcsrb;
+};
+
+/* SWDT */
+struct rcar_swdt {
+	u32 swtcnt;
+	u32 swtcsra;
+	u32 swtcsrb;
+};
+#endif
+
+#endif /* __ASM_ARCH_RCAR_GEN3_BASE_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-mstp.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-mstp.h
new file mode 100644
index 000000000..f2f8ce959
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/rcar-mstp.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/include/asm/arch-rmobile/rcar-mstp.h
+ *
+ * Copyright (C) 2013, 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2013, 2014 Renesas Electronics Corporation
+ */
+
+#ifndef __ASM_ARCH_RCAR_MSTP_H
+#define __ASM_ARCH_RCAR_MSTP_H
+
+#define mstp_setbits(type, addr, saddr, set) \
+		out_##type((saddr), in_##type(addr) | (set))
+#define mstp_clrbits(type, addr, saddr, clear) \
+		out_##type((saddr), in_##type(addr) & ~(clear))
+#define mstp_setclrbits(type, addr, set, clear) \
+		out_##type((addr), (in_##type(addr) | (set)) & ~(clear))
+#define mstp_setbits_le32(addr, saddr, set) \
+		mstp_setbits(le32, addr, saddr, set)
+#define mstp_clrbits_le32(addr, saddr, clear) \
+		mstp_clrbits(le32, addr, saddr, clear)
+#define mstp_setclrbits_le32(addr, set, clear) \
+		mstp_setclrbits(le32, addr, set, clear)
+
+#ifndef CONFIG_SMSTP0_ENA
+#define CONFIG_SMSTP0_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP1_ENA
+#define CONFIG_SMSTP1_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP2_ENA
+#define CONFIG_SMSTP2_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP3_ENA
+#define CONFIG_SMSTP3_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP4_ENA
+#define CONFIG_SMSTP4_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP5_ENA
+#define CONFIG_SMSTP5_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP6_ENA
+#define CONFIG_SMSTP6_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP7_ENA
+#define CONFIG_SMSTP7_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP8_ENA
+#define CONFIG_SMSTP8_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP9_ENA
+#define CONFIG_SMSTP9_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP10_ENA
+#define CONFIG_SMSTP10_ENA	0x00
+#endif
+#ifndef CONFIG_SMSTP11_ENA
+#define CONFIG_SMSTP11_ENA	0x00
+#endif
+
+#ifndef CONFIG_RMSTP0_ENA
+#define CONFIG_RMSTP0_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP1_ENA
+#define CONFIG_RMSTP1_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP2_ENA
+#define CONFIG_RMSTP2_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP3_ENA
+#define CONFIG_RMSTP3_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP4_ENA
+#define CONFIG_RMSTP4_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP5_ENA
+#define CONFIG_RMSTP5_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP6_ENA
+#define CONFIG_RMSTP6_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP7_ENA
+#define CONFIG_RMSTP7_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP8_ENA
+#define CONFIG_RMSTP8_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP9_ENA
+#define CONFIG_RMSTP9_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP10_ENA
+#define CONFIG_RMSTP10_ENA	0x00
+#endif
+#ifndef CONFIG_RMSTP11_ENA
+#define CONFIG_RMSTP11_ENA	0x00
+#endif
+
+struct mstp_ctl {
+	u32 s_addr;
+	u32 s_dis;
+	u32 s_ena;
+	u32 r_addr;
+	u32 r_dis;
+	u32 r_ena;
+};
+
+#endif /* __ASM_ARCH_RCAR_MSTP_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/rmobile.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/rmobile.h
new file mode 100644
index 000000000..a68863614
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/rmobile.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_ARCH_RMOBILE_H
+#define __ASM_ARCH_RMOBILE_H
+
+#if defined(CONFIG_ARCH_RMOBILE)
+#if defined(CONFIG_SH73A0)
+#include <asm/arch/sh73a0.h>
+#elif defined(CONFIG_R8A7740)
+#include <asm/arch/r8a7740.h>
+#elif defined(CONFIG_R8A7790)
+#include <asm/arch/r8a7790.h>
+#elif defined(CONFIG_R8A7791)
+#include <asm/arch/r8a7791.h>
+#elif defined(CONFIG_R8A7792)
+#include <asm/arch/r8a7792.h>
+#elif defined(CONFIG_R8A7793)
+#include <asm/arch/r8a7793.h>
+#elif defined(CONFIG_R8A7794)
+#include <asm/arch/r8a7794.h>
+#elif defined(CONFIG_RCAR_GEN3)
+#include <asm/arch/rcar-gen3-base.h>
+#elif defined(CONFIG_R7S72100)
+#else
+#error "SOC Name not defined"
+#endif
+#endif /* CONFIG_ARCH_RMOBILE */
+
+/* PRR CPU IDs */
+#define RMOBILE_CPU_TYPE_SH73A0		0x37
+#define RMOBILE_CPU_TYPE_R8A7740	0x40
+#define RMOBILE_CPU_TYPE_R8A7790	0x45
+#define RMOBILE_CPU_TYPE_R8A7791	0x47
+#define RMOBILE_CPU_TYPE_R8A7792	0x4A
+#define RMOBILE_CPU_TYPE_R8A7793	0x4B
+#define RMOBILE_CPU_TYPE_R8A7794	0x4C
+#define RMOBILE_CPU_TYPE_R8A7795	0x4F
+#define RMOBILE_CPU_TYPE_R8A7796	0x52
+#define RMOBILE_CPU_TYPE_R8A77965	0x55
+#define RMOBILE_CPU_TYPE_R8A77970	0x54
+#define RMOBILE_CPU_TYPE_R8A77980	0x56
+#define RMOBILE_CPU_TYPE_R8A77990	0x57
+#define RMOBILE_CPU_TYPE_R8A77995	0x58
+
+#ifndef __ASSEMBLY__
+const u8 *rzg_get_cpu_name(void);
+u32 rmobile_get_cpu_type(void);
+u32 rmobile_get_cpu_rev_integer(void);
+u32 rmobile_get_cpu_rev_fraction(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_RMOBILE_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh73a0-gpio.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh73a0-gpio.h
new file mode 100644
index 000000000..398e2c109
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh73a0-gpio.h
@@ -0,0 +1,553 @@
+#ifndef __ASM_SH73A0_H__
+#define __ASM_SH73A0_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function and MSEL switch
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* Hardware manual Table 25-1 (GPIO) */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
+
+	GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+
+	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
+
+	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274,
+	GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279,
+
+	GPIO_PORT280, GPIO_PORT281, GPIO_PORT282,
+
+	GPIO_PORT288, GPIO_PORT289,
+
+	GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294,
+	GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299,
+
+	GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304,
+	GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
+
+	/* Table 25-1 (Function 0-7) */
+	GPIO_FN_VBUS_0,
+	GPIO_FN_GPI0,
+	GPIO_FN_GPI1,
+	GPIO_FN_GPI2,
+	GPIO_FN_GPI3,
+	GPIO_FN_GPI4,
+	GPIO_FN_GPI5,
+	GPIO_FN_GPI6,
+	GPIO_FN_GPI7,
+	GPIO_FN_SCIFA7_RXD,
+	GPIO_FN_SCIFA7_CTS_,
+	GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2,
+	GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2,
+	GPIO_FN_GPO5, GPIO_FN_SCIFA0_SCK, GPIO_FN_FSICOSLDT3, \
+	GPIO_FN_PORT16_VIO_CKOR,
+	GPIO_FN_SCIFA0_TXD,
+	GPIO_FN_SCIFA7_TXD,
+	GPIO_FN_SCIFA7_RTS_, GPIO_FN_PORT19_VIO_CKO2,
+	GPIO_FN_GPO0,
+	GPIO_FN_GPO1,
+	GPIO_FN_GPO2, GPIO_FN_STATUS0,
+	GPIO_FN_GPO3, GPIO_FN_STATUS1,
+	GPIO_FN_GPO4, GPIO_FN_STATUS2,
+	GPIO_FN_VINT,
+	GPIO_FN_TCKON,
+	GPIO_FN_XDVFS1, GPIO_FN_PORT27_I2C_SCL2, GPIO_FN_PORT27_I2C_SCL3, \
+	GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT,
+	GPIO_FN_XDVFS2, GPIO_FN_PORT28_I2C_SDA2, GPIO_FN_PORT28_I2C_SDA3, \
+	GPIO_FN_PORT28_TPU1TO1,
+	GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1,
+	GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR,
+	GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT,
+	GPIO_FN_SCIFA4_TXD,
+	GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+	GPIO_FN_SCIFA4_RTS_,
+	GPIO_FN_SCIFA4_CTS_,
+	GPIO_FN_FSIBOBT, GPIO_FN_FSIBIBT,
+	GPIO_FN_FSIBOLR, GPIO_FN_FSIBILR,
+	GPIO_FN_FSIBOSLD,
+	GPIO_FN_FSIBISLD,
+	GPIO_FN_VACK,
+	GPIO_FN_XTAL1L,
+	GPIO_FN_SCIFA0_RTS_, GPIO_FN_FSICOSLDT2,
+	GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_SCIFA0_CTS_, GPIO_FN_FSICOSLDT1,
+	GPIO_FN_FSICOBT, GPIO_FN_FSICIBT, GPIO_FN_FSIDOBT, GPIO_FN_FSIDIBT,
+	GPIO_FN_FSICOLR, GPIO_FN_FSICILR, GPIO_FN_FSIDOLR, GPIO_FN_FSIDILR,
+	GPIO_FN_FSICOSLD, GPIO_FN_PORT47_FSICSPDIF,
+	GPIO_FN_FSICISLD, GPIO_FN_FSIDISLD,
+	GPIO_FN_FSIACK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, \
+	GPIO_FN_FSIAOMC,
+	GPIO_FN_FSIAOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_FSIAILR,
+
+	GPIO_FN_FSIAOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_FSIAIBT,
+	GPIO_FN_FSIAOSLD, GPIO_FN_BBIF2_TXD2,
+	GPIO_FN_FSIASPDIF, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, \
+	GPIO_FN_FSIBSPDIF, GPIO_FN_PORT53_FSICSPDIF,
+	GPIO_FN_FSIBCK, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, \
+	GPIO_FN_FSIBOMC, GPIO_FN_FSICCK, GPIO_FN_FSICOMC,
+	GPIO_FN_FSIAISLD, GPIO_FN_TPU0TO0,
+	GPIO_FN_A0, GPIO_FN_BS_,
+	GPIO_FN_A12, GPIO_FN_PORT58_KEYOUT7, GPIO_FN_TPU4TO2,
+	GPIO_FN_A13, GPIO_FN_PORT59_KEYOUT6, GPIO_FN_TPU0TO1,
+	GPIO_FN_A14, GPIO_FN_KEYOUT5,
+	GPIO_FN_A15, GPIO_FN_KEYOUT4,
+	GPIO_FN_A16, GPIO_FN_KEYOUT3, GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_A17, GPIO_FN_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
+	GPIO_FN_A18, GPIO_FN_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_A19, GPIO_FN_KEYOUT0, GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_A20, GPIO_FN_KEYIN0, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_A21, GPIO_FN_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
+	GPIO_FN_A22, GPIO_FN_KEYIN2, GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_A23, GPIO_FN_KEYIN3, GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_A24, GPIO_FN_KEYIN4, GPIO_FN_MSIOF0_RXD,
+	GPIO_FN_A25, GPIO_FN_KEYIN5, GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_A26, GPIO_FN_KEYIN6,
+	GPIO_FN_KEYIN7,
+	GPIO_FN_D0_NAF0,
+	GPIO_FN_D1_NAF1,
+	GPIO_FN_D2_NAF2,
+	GPIO_FN_D3_NAF3,
+	GPIO_FN_D4_NAF4,
+	GPIO_FN_D5_NAF5,
+	GPIO_FN_D6_NAF6,
+	GPIO_FN_D7_NAF7,
+	GPIO_FN_D8_NAF8,
+	GPIO_FN_D9_NAF9,
+	GPIO_FN_D10_NAF10,
+	GPIO_FN_D11_NAF11,
+	GPIO_FN_D12_NAF12,
+	GPIO_FN_D13_NAF13,
+	GPIO_FN_D14_NAF14,
+	GPIO_FN_D15_NAF15,
+	GPIO_FN_CS4_,
+	GPIO_FN_CS5A_, GPIO_FN_PORT91_RDWR,
+	GPIO_FN_CS5B_, GPIO_FN_FCE1_,
+	GPIO_FN_CS6B_, GPIO_FN_DACK0,
+	GPIO_FN_FCE0_, GPIO_FN_CS6A_,
+	GPIO_FN_WAIT_, GPIO_FN_DREQ0,
+	GPIO_FN_RD__FSC,
+	GPIO_FN_WE0__FWE, GPIO_FN_RDWR_FWE,
+	GPIO_FN_WE1_,
+	GPIO_FN_FRB,
+	GPIO_FN_CKO,
+	GPIO_FN_NBRSTOUT_,
+	GPIO_FN_NBRST_,
+	GPIO_FN_BBIF2_TXD,
+	GPIO_FN_BBIF2_RXD,
+	GPIO_FN_BBIF2_SYNC,
+	GPIO_FN_BBIF2_SCK,
+	GPIO_FN_SCIFA3_CTS_, GPIO_FN_MFG3_IN2,
+	GPIO_FN_SCIFA3_RXD, GPIO_FN_MFG3_IN1,
+	GPIO_FN_BBIF1_SS2, GPIO_FN_SCIFA3_RTS_, GPIO_FN_MFG3_OUT1,
+	GPIO_FN_SCIFA3_TXD,
+	GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD,
+	GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK,
+	GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC,
+	GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD,
+	GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, GPIO_FN_PORT115_I2C_SCL2, \
+	GPIO_FN_PORT115_I2C_SCL3,
+	GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, GPIO_FN_PORT116_I2C_SDA2, \
+	GPIO_FN_PORT116_I2C_SDA3,
+	GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW,
+	GPIO_FN_HSI_TX_FLAG,
+	GPIO_FN_VIO_VD, GPIO_FN_PORT128_LCD2VSYN, GPIO_FN_VIO2_VD, \
+	GPIO_FN_LCD2D0,
+
+	GPIO_FN_VIO_HD, GPIO_FN_PORT129_LCD2HSYN, GPIO_FN_PORT129_LCD2CS_, \
+	GPIO_FN_VIO2_HD, GPIO_FN_LCD2D1,
+	GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, GPIO_FN_LCD2D10,
+	GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT6, GPIO_FN_PORT131_MSIOF2_SS1, \
+	GPIO_FN_PORT131_KEYOUT11, GPIO_FN_LCD2D11,
+	GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT7, GPIO_FN_PORT132_MSIOF2_SS2, \
+	GPIO_FN_PORT132_KEYOUT10, GPIO_FN_LCD2D12,
+	GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_LCD2D13,
+	GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, GPIO_FN_LCD2D14,
+	GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, GPIO_FN_LCD2D15,
+	GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYOUT8, GPIO_FN_LCD2D16,
+	GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYOUT9, GPIO_FN_LCD2D17,
+	GPIO_FN_VIO_D8, GPIO_FN_PORT138_KEYOUT8, GPIO_FN_VIO2_D0, \
+	GPIO_FN_LCD2D6,
+	GPIO_FN_VIO_D9, GPIO_FN_PORT139_KEYOUT9, GPIO_FN_VIO2_D1, \
+	GPIO_FN_LCD2D7,
+	GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, GPIO_FN_LCD2D8,
+	GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, GPIO_FN_LCD2D9,
+	GPIO_FN_VIO_D12, GPIO_FN_PORT142_KEYOUT10, GPIO_FN_VIO2_D4, \
+	GPIO_FN_LCD2D2,
+	GPIO_FN_VIO_D13, GPIO_FN_PORT143_KEYOUT11, GPIO_FN_PORT143_KEYOUT6, \
+	GPIO_FN_VIO2_D5, GPIO_FN_LCD2D3,
+	GPIO_FN_VIO_D14, GPIO_FN_PORT144_KEYOUT7, GPIO_FN_VIO2_D6, \
+	GPIO_FN_LCD2D4,
+	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_LCD2DISP, \
+	GPIO_FN_PORT145_LCD2RS, GPIO_FN_VIO2_D7, GPIO_FN_LCD2D5,
+	GPIO_FN_VIO_CLK, GPIO_FN_LCD2DCK, GPIO_FN_PORT146_LCD2WR_, \
+	GPIO_FN_VIO2_CLK, GPIO_FN_LCD2D18,
+	GPIO_FN_VIO_FIELD, GPIO_FN_LCD2RD_, GPIO_FN_VIO2_FIELD, GPIO_FN_LCD2D19,
+	GPIO_FN_VIO_CKO,
+	GPIO_FN_A27, GPIO_FN_PORT149_RDWR, GPIO_FN_MFG0_IN1, \
+	GPIO_FN_PORT149_KEYOUT9,
+	GPIO_FN_MFG0_IN2,
+	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
+	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
+	GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
+	GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_SCIFA2_RTS1_, GPIO_FN_PORT156_MSIOF2_SS2,
+	GPIO_FN_SCIFA2_CTS1_, GPIO_FN_PORT157_MSIOF2_RXD,
+	GPIO_FN_DINT_, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+	GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
+	GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD,
+	GPIO_FN_PORT161_SCIFB_CTS_, GPIO_FN_PORT161_SCIFA5_CTS_,
+	GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD,
+	GPIO_FN_PORT163_SCIFB_RTS_, GPIO_FN_PORT163_SCIFA5_RTS_, \
+	GPIO_FN_TPU3TO0,
+	GPIO_FN_LCDD0,
+	GPIO_FN_LCDD1, GPIO_FN_PORT193_SCIFA5_CTS_, GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_LCDD2, GPIO_FN_PORT194_SCIFA5_RTS_, GPIO_FN_BBIF2_TSCK1,
+	GPIO_FN_LCDD3, GPIO_FN_PORT195_SCIFA5_RXD, GPIO_FN_BBIF2_TXD1,
+	GPIO_FN_LCDD4, GPIO_FN_PORT196_SCIFA5_TXD,
+	GPIO_FN_LCDD5, GPIO_FN_PORT197_SCIFA5_SCK, GPIO_FN_MFG2_OUT2, \
+	GPIO_FN_TPU2TO1,
+	GPIO_FN_LCDD6,
+	GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2,
+	GPIO_FN_LCDD8, GPIO_FN_D16,
+	GPIO_FN_LCDD9, GPIO_FN_D17,
+	GPIO_FN_LCDD10, GPIO_FN_D18,
+	GPIO_FN_LCDD11, GPIO_FN_D19,
+	GPIO_FN_LCDD12, GPIO_FN_D20,
+	GPIO_FN_LCDD13, GPIO_FN_D21,
+	GPIO_FN_LCDD14, GPIO_FN_D22,
+	GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23,
+	GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24,
+	GPIO_FN_LCDD17, GPIO_FN_D25,
+	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
+	GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27,
+	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
+	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
+	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
+	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
+	GPIO_FN_LCDDCK, GPIO_FN_LCDWR_,
+	GPIO_FN_LCDRD_, GPIO_FN_DACK2, GPIO_FN_PORT217_LCD2RS, \
+	GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, GPIO_FN_PORT217_LCD2DISP,
+	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS_, GPIO_FN_LCDCS2_, GPIO_FN_DACK3, \
+	GPIO_FN_PORT218_VIO_CKOR,
+	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_PORT219_LCD2WR_, \
+	GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \
+	GPIO_FN_LCD2DCK_2,
+	GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2,
+	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PORT221_LCD2CS_, \
+	GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \
+	GPIO_FN_PORT221_LCD2HSYN,
+	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, \
+	GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, GPIO_FN_PORT222_LCD2VSYN,
+
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
+	GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_PORT226_VIO_CKO2,
+	GPIO_FN_SCIFA1_RTS_, GPIO_FN_IDIN,
+	GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_SCIFA1_CTS_, GPIO_FN_MFG1_IN1,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2_,
+	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2,
+	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2,
+	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2_, GPIO_FN_VIO2_CLK2, \
+	GPIO_FN_LCD2D20,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \
+	GPIO_FN_LCD2D21,
+	GPIO_FN_MSIOF1_MCK0, GPIO_FN_PORT236_I2C_SDA2,
+	GPIO_FN_MSIOF1_MCK1, GPIO_FN_PORT237_I2C_SCL2,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, GPIO_FN_LCD2D22,
+	GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, GPIO_FN_LCD2D23,
+	GPIO_FN_SCIFA6_TXD,
+	GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \
+	GPIO_FN_TPU4TO0,
+	GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
+	GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
+	GPIO_FN_PORT244_SCIFA5_CTS_, GPIO_FN_MFG2_IN1, \
+	GPIO_FN_PORT244_SCIFB_CTS_, GPIO_FN_MSIOF2R_RXD,
+	GPIO_FN_PORT245_SCIFA5_RTS_, GPIO_FN_MFG2_IN2, \
+	GPIO_FN_PORT245_SCIFB_RTS_, GPIO_FN_MSIOF2R_TXD,
+	GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, \
+	GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
+	GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, \
+	GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
+	GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, \
+	GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, \
+	GPIO_FN_PORT248_I2C_SCL3, GPIO_FN_MSIOF2R_TSCK,
+	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \
+	GPIO_FN_PORT249_I2C_SDA3, GPIO_FN_MSIOF2R_TSYNC,
+	GPIO_FN_SDHICLK0,
+	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHID0_0,
+	GPIO_FN_SDHID0_1,
+	GPIO_FN_SDHID0_2,
+	GPIO_FN_SDHID0_3,
+	GPIO_FN_SDHICMD0,
+	GPIO_FN_SDHIWP0,
+	GPIO_FN_SDHICLK1,
+	GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2,
+	GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2,
+	GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2,
+	GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2,
+	GPIO_FN_SDHICMD1,
+	GPIO_FN_SDHICLK2,
+	GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4,
+	GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4,
+	GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4,
+	GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4,
+	GPIO_FN_SDHICMD2,
+	GPIO_FN_MMCCLK0,
+	GPIO_FN_MMCD0_0,
+	GPIO_FN_MMCD0_1,
+	GPIO_FN_MMCD0_2,
+	GPIO_FN_MMCD0_3,
+	GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5,
+	GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5,
+	GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5,
+	GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5,
+	GPIO_FN_MMCCMD0,
+	GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT,
+	GPIO_FN_MCP_WAIT__MCP_FRB,
+	GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1,
+	GPIO_FN_MCP_D15_MCP_NAF15,
+	GPIO_FN_MCP_D14_MCP_NAF14,
+	GPIO_FN_MCP_D13_MCP_NAF13,
+	GPIO_FN_MCP_D12_MCP_NAF12,
+	GPIO_FN_MCP_D11_MCP_NAF11,
+	GPIO_FN_MCP_D10_MCP_NAF10,
+	GPIO_FN_MCP_D9_MCP_NAF9,
+	GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1,
+	GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7,
+
+	GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6,
+	GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5,
+	GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4,
+	GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3,
+	GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2,
+	GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1,
+	GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0,
+	GPIO_FN_MCP_NBRSTOUT_,
+	GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE,
+
+	/* MSEL2 special case */
+	GPIO_FN_TSIF2_TS_XX1,
+	GPIO_FN_TSIF2_TS_XX2,
+	GPIO_FN_TSIF2_TS_XX3,
+	GPIO_FN_TSIF2_TS_XX4,
+	GPIO_FN_TSIF2_TS_XX5,
+	GPIO_FN_TSIF1_TS_XX1,
+	GPIO_FN_TSIF1_TS_XX2,
+	GPIO_FN_TSIF1_TS_XX3,
+	GPIO_FN_TSIF1_TS_XX4,
+	GPIO_FN_TSIF1_TS_XX5,
+	GPIO_FN_TSIF0_TS_XX1,
+	GPIO_FN_TSIF0_TS_XX2,
+	GPIO_FN_TSIF0_TS_XX3,
+	GPIO_FN_TSIF0_TS_XX4,
+	GPIO_FN_TSIF0_TS_XX5,
+	GPIO_FN_MST1_TS_XX1,
+	GPIO_FN_MST1_TS_XX2,
+	GPIO_FN_MST1_TS_XX3,
+	GPIO_FN_MST1_TS_XX4,
+	GPIO_FN_MST1_TS_XX5,
+	GPIO_FN_MST0_TS_XX1,
+	GPIO_FN_MST0_TS_XX2,
+	GPIO_FN_MST0_TS_XX3,
+	GPIO_FN_MST0_TS_XX4,
+	GPIO_FN_MST0_TS_XX5,
+
+	/* MSEL3 special cases */
+	GPIO_FN_SDHI0_VCCQ_MC0_ON,
+	GPIO_FN_SDHI0_VCCQ_MC0_OFF,
+	GPIO_FN_DEBUG_MON_VIO,
+	GPIO_FN_DEBUG_MON_LCDD,
+	GPIO_FN_LCDC_LCDC0,
+	GPIO_FN_LCDC_LCDC1,
+
+	/* MSEL4 special cases */
+	GPIO_FN_IRQ9_MEM_INT,
+	GPIO_FN_IRQ9_MCP_INT,
+	GPIO_FN_A11,
+	GPIO_FN_KEYOUT8,
+	GPIO_FN_TPU4TO3,
+	GPIO_FN_RESETA_N_PU_ON,
+	GPIO_FN_RESETA_N_PU_OFF,
+	GPIO_FN_EDBGREQ_PD,
+	GPIO_FN_EDBGREQ_PU,
+
+	/* Functions with pull-ups */
+	GPIO_FN_KEYIN0_PU,
+	GPIO_FN_KEYIN1_PU,
+	GPIO_FN_KEYIN2_PU,
+	GPIO_FN_KEYIN3_PU,
+	GPIO_FN_KEYIN4_PU,
+	GPIO_FN_KEYIN5_PU,
+	GPIO_FN_KEYIN6_PU,
+	GPIO_FN_KEYIN7_PU,
+	GPIO_FN_SDHICD0_PU,
+	GPIO_FN_SDHID0_0_PU,
+	GPIO_FN_SDHID0_1_PU,
+	GPIO_FN_SDHID0_2_PU,
+	GPIO_FN_SDHID0_3_PU,
+	GPIO_FN_SDHICMD0_PU,
+	GPIO_FN_SDHIWP0_PU,
+	GPIO_FN_SDHID1_0_PU,
+	GPIO_FN_SDHID1_1_PU,
+	GPIO_FN_SDHID1_2_PU,
+	GPIO_FN_SDHID1_3_PU,
+	GPIO_FN_SDHICMD1_PU,
+	GPIO_FN_SDHID2_0_PU,
+	GPIO_FN_SDHID2_1_PU,
+	GPIO_FN_SDHID2_2_PU,
+	GPIO_FN_SDHID2_3_PU,
+	GPIO_FN_SDHICMD2_PU,
+	GPIO_FN_MMCCMD0_PU,
+	GPIO_FN_MMCCMD1_PU,
+	GPIO_FN_MMCD0_0_PU,
+	GPIO_FN_MMCD0_1_PU,
+	GPIO_FN_MMCD0_2_PU,
+	GPIO_FN_MMCD0_3_PU,
+	GPIO_FN_MMCD0_4_PU,
+	GPIO_FN_MMCD0_5_PU,
+	GPIO_FN_MMCD0_6_PU,
+	GPIO_FN_MMCD0_7_PU,
+	GPIO_FN_FSIACK_PU,
+	GPIO_FN_FSIAILR_PU,
+	GPIO_FN_FSIAIBT_PU,
+	GPIO_FN_FSIAISLD_PU,
+
+	/* end of GPIO */
+	GPIO_NR,
+};
+
+/* DMA slave IDs */
+enum {
+	SHDMA_SLAVE_INVALID,
+	SHDMA_SLAVE_SCIF0_TX,
+	SHDMA_SLAVE_SCIF0_RX,
+	SHDMA_SLAVE_SCIF1_TX,
+	SHDMA_SLAVE_SCIF1_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SCIF3_TX,
+	SHDMA_SLAVE_SCIF3_RX,
+	SHDMA_SLAVE_SCIF4_TX,
+	SHDMA_SLAVE_SCIF4_RX,
+	SHDMA_SLAVE_SCIF5_TX,
+	SHDMA_SLAVE_SCIF5_RX,
+	SHDMA_SLAVE_SCIF6_TX,
+	SHDMA_SLAVE_SCIF6_RX,
+	SHDMA_SLAVE_SCIF7_TX,
+	SHDMA_SLAVE_SCIF7_RX,
+	SHDMA_SLAVE_SCIF8_TX,
+	SHDMA_SLAVE_SCIF8_RX,
+	SHDMA_SLAVE_SDHI0_TX,
+	SHDMA_SLAVE_SDHI0_RX,
+	SHDMA_SLAVE_SDHI1_TX,
+	SHDMA_SLAVE_SDHI1_RX,
+	SHDMA_SLAVE_SDHI2_TX,
+	SHDMA_SLAVE_SDHI2_RX,
+	SHDMA_SLAVE_MMCIF_TX,
+	SHDMA_SLAVE_MMCIF_RX,
+};
+
+/*
+ *		SH73A0 IRQ LOCATION TABLE
+ *
+ * 416	-----------------------------------------
+ *		IRQ0-IRQ15
+ * 431	-----------------------------------------
+ * ...
+ * 448	-----------------------------------------
+ *		sh73a0-intcs
+ *		sh73a0-intca-irq-pins
+ * 680	-----------------------------------------
+ * ...
+ * 700	-----------------------------------------
+ *		sh73a0-pint0
+ * 731	-----------------------------------------
+ * 732	-----------------------------------------
+ *		sh73a0-pint1
+ * 739	-----------------------------------------
+ * ...
+ * 800	-----------------------------------------
+ *		IRQ16-IRQ31
+ * 815	-----------------------------------------
+ * ...
+ * 928	-----------------------------------------
+ *		sh73a0-intca-irq-pins
+ * 943	-----------------------------------------
+ */
+
+/* PINT interrupts are located at Linux IRQ 700 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
+
+#endif /* __ASM_SH73A0_H__ */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh73a0.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh73a0.h
new file mode 100644
index 000000000..bdbb40864
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh73a0.h
@@ -0,0 +1,289 @@
+#ifndef __ASM_ARCH_RMOBILE_SH73A0_H
+#define __ASM_ARCH_RMOBILE_SH73A0_H
+
+/* Global Timer */
+#define GLOBAL_TIMER_BASE_ADDR	(0xF0000200)
+#define MERAM_BASE	(0xE5580000)
+
+/* GIC */
+#define GIC_BASE	(0xF0000100)
+#define ICCICR	GIC_BASE
+
+/* Secure control register */
+#define LIFEC_SEC_SRC	(0xE6110008)
+
+/* RWDT */
+#define	RWDT_BASE   (0xE6020000)
+
+/* HPB Semaphore Control Registers */
+#define HPB_BASE	(0xE6001010)
+
+/* Bus Semaphore Control Registers */
+#define HPBSCR_BASE (0xE6001600)
+
+/* SBSC1 */
+#define SBSC1_BASE	(0xFE400000)
+#define	SDMRA1A		(SBSC1_BASE + 0x100000)
+#define	SDMRA2A		(SBSC1_BASE + 0x1C0000)
+#define	SDMRA3A		(SBSC1_BASE + 0x104000)
+
+/* SBSC2 */
+#define SBSC2_BASE	(0xFB400000)
+#define	SDMRA1B		(SBSC2_BASE + 0x100000)
+#define	SDMRA2B		(SBSC2_BASE + 0x1C0000)
+#define	SDMRA3B		(SBSC2_BASE + 0x104000)
+
+/* CPG */
+#define CPG_BASE   (0xE6150000)
+#define	CPG_SRCR_BASE	(CPG_BASE + 0x80A0)
+#define WUPCR	(CPG_BASE + 0x1010)
+#define SRESCR	(CPG_BASE + 0x1018)
+#define PCLKCR	(CPG_BASE + 0x1020)
+
+/* SYSC */
+#define SYSC_BASE   (0xE6180000)
+#define RESCNT2	(SYSC_BASE + 0x8020)
+
+/* BSC */
+#define BSC_BASE (0xFEC10000)
+
+/* SCIF */
+#define SCIF0_BASE	(0xE6C40000)
+#define SCIF1_BASE	(0xE6C50000)
+#define SCIF2_BASE	(0xE6C60000)
+#define SCIF3_BASE	(0xE6C70000)
+#define SCIF4_BASE	(0xE6C80000)
+#define SCIF5_BASE	(0xE6CB0000)
+#define SCIF6_BASE	(0xE6CC0000)
+#define SCIF7_BASE	(0xE6CD0000)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct sh73a0_rwdt {
+	u16 rwtcnt0;	/* 0x00 */
+	u16 dummy0;	/* 0x02 */
+	u16 rwtcsra0;	/* 0x04 */
+	u16 dummy1;	/* 0x06 */
+	u16 rwtcsrb0;	/* 0x08 */
+};
+
+/* HPB Semaphore Control Registers */
+struct sh73a0_hpb {
+	u32 hpbctrl0;
+	u32 hpbctrl1;
+	u32 hpbctrl2;
+	u32 cccr;
+	u32 dummy0; /* 0x20 */
+	u32 hpbctrl4;
+	u32 hpbctrl5;
+	u32 dummy1; /* 0x2C */
+	u32 hpbctrl6;
+};
+
+/* Bus Semaphore Control Registers */
+struct sh73a0_hpb_bscr {
+	u32 mpsrc; /* 0x00 */
+	u32 mpacctl; /* 0x04 */
+	u32 dummy0[6];
+	u32 smgpiosrc; /* 0x20 */
+	u32 smgpioerr;
+	u32 smgpiotime;
+	u32 smgpiocnt;
+	u32 dummy1[4]; /* 0x30 .. 0x3C */
+	u32 smcmt2src;
+	u32 smcmt2err;
+	u32 smcmt2time;
+	u32 smcmt2cnt;
+	u32 smcpgsrc;
+	u32 smcpgerr;
+	u32 smcpgtime;
+	u32 smcpgcnt;
+	u32 dummy2[4]; /* 0x60 - 0x6C */
+	u32 smsyscsrc;
+	u32 smsyscerr;
+	u32 smsysctime;
+	u32 smsysccnt;
+};
+
+/* SBSC */
+struct sh73a0_sbsc {
+	u32 dummy0[2]; /* 0x00, 0x04 */
+	u32 sdcr0;
+	u32 sdcr1;
+	u32 sdpcr;
+	u32 dummy1; /* 0x14 */
+	u32 sdcr0s;
+	u32 sdcr1s;
+	u32 rtcsr;
+	u32 dummy2; /* 0x24 */
+	u32 rtcor;
+	u32 rtcorh;
+	u32 rtcors;
+	u32 rtcorsh;
+	u32 dummy3[2]; /* 0x38, 0x3C */
+	u32 sdwcrc0;
+	u32 sdwcrc1;
+	u32 sdwcr00;
+	u32 sdwcr01;
+	u32 sdwcr10;
+	u32 sdwcr11;
+	u32 sdpdcr0;
+	u32 dummy4; /* 0x5C */
+	u32 sdwcr2;
+	u32 sdwcrc2;
+	u32 zqccr;
+	u32 dummy5[6]; /* 0x6C .. 0x80 */
+	u32 sdmracr0;
+	u32 dummy6; /* 0x88 */
+	u32 sdmrtmpcr;
+	u32 dummy7; /* 0x90 */
+	u32 sdmrtmpmsk;
+	u32 dummy8; /* 0x98 */
+	u32 sdgencnt;
+	u32 dphycnt0;
+	u32 dphycnt1;
+	u32 dphycnt2;
+	u32 dummy9[2]; /* 0xAC .. 0xB0 */
+	u32 sddrvcr0;
+	u32 dummy10[14]; /* 0xB8 .. 0xEC */
+	u32 dptdivcr0;
+	u32 dptdivcr1;
+	u32 dptdivcr2;
+	u32 dummy11; /* 0xFC */
+	u32 sdptcr0;
+	u32 sdptcr1;
+	u32 sdptcr2;
+	u32 sdptcr3; /* 0x10C */
+	u32 dummy12[145]; /* 0x110 .. 0x350 */
+	u32 dllcnt0; /* 0x354 */
+	u32 sbscmon0;
+};
+
+/* CPG */
+struct sh73a0_sbsc_cpg {
+	u32 frqcra; /* 0x00 */
+	u32 frqcrb;
+	u32 vclkcr1;
+	u32 vclkcr2;
+	u32 zbckcr;
+	u32 flckcr;
+	u32 fsiackcr;
+	u32 vclkcr3;
+	u32 rtstbcr;
+	u32 systbcr;
+	u32 pll1cr;
+	u32 pll2cr;
+	u32 mstpsr0;
+	u32 dummy0; /* 0x34 */
+	u32 mstpsr1;
+	u32 mstpsr5;
+	u32 mstpsr2;
+	u32 dummy1; /* 0x44 */
+	u32 mstpsr3;
+	u32 mstpsr4;
+	u32 dummy2; /* 0x50 */
+	u32 astat;
+	u32 dvfscr0;
+	u32 dvfscr1;
+	u32 dsitckcr;
+	u32 dsi0pckcr;
+	u32 dsi1pckcr;
+	u32 dsi0phycr;
+	u32 dsi1phycr;
+	u32 sd0ckcr;
+	u32 sd1ckcr;
+	u32 sd2ckcr;
+	u32 subckcr;
+	u32 spuackcr;
+	u32 msuckcr;
+	u32 hsickcr;
+	u32 fsibckcr;
+	u32 spuvckcr;
+	u32 mfck1cr;
+	u32 mfck2cr;
+	u32 dummy3[8]; /* 0xA0 .. 0xBC */
+	u32 ckscr;
+	u32 dummy4; /* 0xC4 */
+	u32 pll1stpcr;
+	u32 mpmode;
+	u32 pllecr;
+	u32 dummy5; /* 0xD4 */
+	u32 pll0cr;
+	u32 pll3cr;
+	u32 dummy6; /* 0xE0 */
+	u32 frqcrd;
+	u32 dummyi7; /* 0xE8 */
+	u32 vrefcr;
+	u32 pll0stpcr;
+	u32 dummy8; /* 0xF4 */
+	u32 pll2stpcr;
+	u32 pll3stpcr;
+	u32 dummy9[4]; /* 0x100 .. 0x10c */
+	u32 rmstpcr0;
+	u32 rmstpcr1;
+	u32 rmstpcr2;
+	u32 rmstpcr3;
+	u32 rmstpcr4;
+	u32 rmstpcr5;
+	u32 dummy10[2]; /* 0x128 .. 0x12c */
+	u32 smstpcr0;
+	u32 smstpcr1;
+	u32 smstpcr2;
+	u32 smstpcr3;
+	u32 smstpcr4;
+	u32 smstpcr5;
+	u32 dummy11[2]; /* 0x148 .. 0x14c */
+	u32 cpgxxcs4;
+	u32 dummy12[7]; /* 0x154 .. 0x16c */
+	u32 dvfscr2;
+	u32 dvfscr3;
+	u32 dvfscr4;
+	u32 dvfscr5; /* 0x17C */
+};
+
+/* CPG SRCR part OK */
+struct sh73a0_sbsc_cpg_srcr {
+	u32 srcr0;
+	u32 dummy0; /* 0xA4 */
+	u32 srcr1;
+	u32 dummy1; /* 0xAC */
+	u32 srcr2;
+	u32 dummy2; /* 0xB4 */
+	u32 srcr3;
+	u32 srcr4;
+	u32 dummy3; /* 0xC0 */
+	u32 srcr5;
+};
+
+/* BSC */
+struct sh73a0_bsc {
+	u32 cmncr;
+	u32 cs0bcr;
+	u32 cs2bcr;
+	u32 dummy0; /* 0x0C */
+	u32 cs4bcr;
+	u32 cs5abcr;
+	u32 cs5bbcr;
+	u32 cs6abcr;
+	u32 cs6bbcr;
+	u32 cs0wcr;
+	u32 cs2wcr;
+	u32 dummy1; /* 0x2C */
+	u32 cs4wcr;
+	u32 cs5awcr;
+	u32 cs5bwcr;
+	u32 cs6awcr;
+	u32 cs6bwcr;
+	u32 rbwtcnt;
+	u32 busycr;
+	u32 dummy2; /* 0x5c */
+	u32 cs7abcr;
+	u32 cs7awcr;
+	u32 dummy3[2]; /* 0x68, 0x6C */
+	u32 bromtimcr;
+};
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_RMOBILE_SH73A0_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh_sdhi.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh_sdhi.h
new file mode 100644
index 000000000..7741718be
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/sh_sdhi.h
@@ -0,0 +1,170 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * drivers/mmc/sh-sdhi.h
+ *
+ * SD/MMC driver for Renesas rmobile ARM SoCs
+ *
+ * Copyright (C) 2013-2017 Renesas Electronics Corporation
+ * Copyright (C) 2008-2009 Renesas Solutions Corp.
+ */
+
+#ifndef _SH_SDHI_H
+#define _SH_SDHI_H
+
+#include <linux/bitops.h>
+#define SDHI_CMD			(0x0000 >> 1)
+#define SDHI_PORTSEL			(0x0004 >> 1)
+#define SDHI_ARG0			(0x0008 >> 1)
+#define SDHI_ARG1			(0x000C >> 1)
+#define SDHI_STOP			(0x0010 >> 1)
+#define SDHI_SECCNT			(0x0014 >> 1)
+#define SDHI_RSP00			(0x0018 >> 1)
+#define SDHI_RSP01			(0x001C >> 1)
+#define SDHI_RSP02			(0x0020 >> 1)
+#define SDHI_RSP03			(0x0024 >> 1)
+#define SDHI_RSP04			(0x0028 >> 1)
+#define SDHI_RSP05			(0x002C >> 1)
+#define SDHI_RSP06			(0x0030 >> 1)
+#define SDHI_RSP07			(0x0034 >> 1)
+#define SDHI_INFO1			(0x0038 >> 1)
+#define SDHI_INFO2			(0x003C >> 1)
+#define SDHI_INFO1_MASK			(0x0040 >> 1)
+#define SDHI_INFO2_MASK			(0x0044 >> 1)
+#define SDHI_CLK_CTRL			(0x0048 >> 1)
+#define SDHI_SIZE			(0x004C >> 1)
+#define SDHI_OPTION			(0x0050 >> 1)
+#define SDHI_ERR_STS1			(0x0058 >> 1)
+#define SDHI_ERR_STS2			(0x005C >> 1)
+#define SDHI_BUF0			(0x0060 >> 1)
+#define SDHI_SDIO_MODE			(0x0068 >> 1)
+#define SDHI_SDIO_INFO1			(0x006C >> 1)
+#define SDHI_SDIO_INFO1_MASK		(0x0070 >> 1)
+#define SDHI_CC_EXT_MODE		(0x01B0 >> 1)
+#define SDHI_SOFT_RST			(0x01C0 >> 1)
+#define SDHI_VERSION			(0x01C4 >> 1)
+#define SDHI_HOST_MODE			(0x01C8 >> 1)
+#define SDHI_SDIF_MODE			(0x01CC >> 1)
+#define SDHI_EXT_SWAP			(0x01E0 >> 1)
+#define SDHI_SD_DMACR			(0x0324 >> 1)
+
+/* SDHI CMD VALUE */
+#define CMD_MASK			0x0000ffff
+
+/* SDHI_PORTSEL */
+#define USE_1PORT			(1 << 8) /* 1 port */
+
+/* SDHI_ARG */
+#define ARG0_MASK			0x0000ffff
+#define ARG1_MASK			0x0000ffff
+
+/* SDHI_STOP */
+#define STOP_SEC_ENABLE			(1 << 8)
+
+/* SDHI_INFO1 */
+#define INFO1_RESP_END			(1 << 0)
+#define INFO1_ACCESS_END		(1 << 2)
+#define INFO1_CARD_RE			(1 << 3)
+#define INFO1_CARD_IN			(1 << 4)
+#define INFO1_ISD0CD			(1 << 5)
+#define INFO1_WRITE_PRO			(1 << 7)
+#define INFO1_DATA3_CARD_RE		(1 << 8)
+#define INFO1_DATA3_CARD_IN		(1 << 9)
+#define INFO1_DATA3			(1 << 10)
+
+/* SDHI_INFO2 */
+#define INFO2_CMD_ERROR			(1 << 0)
+#define INFO2_CRC_ERROR			(1 << 1)
+#define INFO2_END_ERROR			(1 << 2)
+#define INFO2_TIMEOUT			(1 << 3)
+#define INFO2_BUF_ILL_WRITE		(1 << 4)
+#define INFO2_BUF_ILL_READ		(1 << 5)
+#define INFO2_RESP_TIMEOUT		(1 << 6)
+#define INFO2_SDDAT0			(1 << 7)
+#define INFO2_BRE_ENABLE		(1 << 8)
+#define INFO2_BWE_ENABLE		(1 << 9)
+#define INFO2_CBUSY			(1 << 14)
+#define INFO2_ILA			(1 << 15)
+#define INFO2_ALL_ERR			(0x807f)
+
+/* SDHI_INFO1_MASK */
+#define INFO1M_RESP_END			(1 << 0)
+#define INFO1M_ACCESS_END		(1 << 2)
+#define INFO1M_CARD_RE			(1 << 3)
+#define INFO1M_CARD_IN			(1 << 4)
+#define INFO1M_DATA3_CARD_RE		(1 << 8)
+#define INFO1M_DATA3_CARD_IN		(1 << 9)
+#define INFO1M_ALL			(0xffff)
+#define INFO1M_SET			(INFO1M_RESP_END |	\
+					INFO1M_ACCESS_END |	\
+					INFO1M_DATA3_CARD_RE |	\
+					INFO1M_DATA3_CARD_IN)
+
+/* SDHI_INFO2_MASK */
+#define INFO2M_CMD_ERROR		(1 << 0)
+#define INFO2M_CRC_ERROR		(1 << 1)
+#define INFO2M_END_ERROR		(1 << 2)
+#define INFO2M_TIMEOUT			(1 << 3)
+#define INFO2M_BUF_ILL_WRITE		(1 << 4)
+#define INFO2M_BUF_ILL_READ		(1 << 5)
+#define INFO2M_RESP_TIMEOUT		(1 << 6)
+#define INFO2M_BRE_ENABLE		(1 << 8)
+#define INFO2M_BWE_ENABLE		(1 << 9)
+#define INFO2M_ILA			(1 << 15)
+#define INFO2M_ALL			(0xffff)
+#define INFO2M_ALL_ERR			(0x807f)
+
+/* SDHI_CLK_CTRL */
+#define CLK_ENABLE			(1 << 8)
+
+/* SDHI_OPTION */
+#define OPT_BUS_WIDTH_M			(5 << 13)	/* 101b (15-13bit) */
+#define OPT_BUS_WIDTH_1			(4 << 13)	/* bus width = 1 bit */
+#define OPT_BUS_WIDTH_4			(0 << 13)	/* bus width = 4 bit */
+#define OPT_BUS_WIDTH_8			(1 << 13)	/* bus width = 8 bit */
+
+/* SDHI_ERR_STS1 */
+#define ERR_STS1_CRC_ERROR		((1 << 11) | (1 << 10) | (1 << 9) | \
+					(1 << 8) | (1 << 5))
+#define ERR_STS1_CMD_ERROR		((1 << 4) | (1 << 3) | (1 << 2) | \
+					(1 << 1) | (1 << 0))
+
+/* SDHI_ERR_STS2 */
+#define ERR_STS2_RES_TIMEOUT		(1 << 0)
+#define ERR_STS2_RES_STOP_TIMEOUT	((1 << 0) | (1 << 1))
+#define ERR_STS2_SYS_ERROR		((1 << 6) | (1 << 5) | (1 << 4) | \
+					(1 << 3) | (1 << 2) | (1 << 1) | \
+					(1 << 0))
+
+/* SDHI_SDIO_MODE */
+#define SDIO_MODE_ON			(1 << 0)
+#define SDIO_MODE_OFF			(0 << 0)
+
+/* SDHI_SDIO_INFO1 */
+#define SDIO_INFO1_IOIRQ		(1 << 0)
+#define SDIO_INFO1_EXPUB52		(1 << 14)
+#define SDIO_INFO1_EXWT			(1 << 15)
+
+/* SDHI_SDIO_INFO1_MASK */
+#define SDIO_INFO1M_CLEAR		((1 << 1) | (1 << 2))
+#define SDIO_INFO1M_ON			((1 << 15) | (1 << 14) | (1 << 2) | \
+					 (1 << 1) | (1 << 0))
+
+/* SDHI_EXT_SWAP */
+#define SET_SWAP			((1 << 6) | (1 << 7))	/* SWAP */
+
+/* SDHI_SOFT_RST */
+#define SOFT_RST_ON			(0 << 0)
+#define SOFT_RST_OFF			(1 << 0)
+
+#define	CLKDEV_SD_DATA			25000000	/* 25 MHz */
+#define CLKDEV_HS_DATA			50000000	/* 50 MHz */
+#define CLKDEV_MMC_DATA			20000000	/* 20MHz */
+#define	CLKDEV_INIT			400000		/* 100 - 400 KHz */
+
+/* For quirk */
+#define SH_SDHI_QUIRK_16BIT_BUF		BIT(0)
+#define SH_SDHI_QUIRK_64BIT_BUF		BIT(1)
+
+int sh_sdhi_init(unsigned long addr, int ch, unsigned long quirks);
+
+#endif /* _SH_SDHI_H */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/include/mach/sys_proto.h b/roms/u-boot/arch/arm/mach-rmobile/include/mach/sys_proto.h
new file mode 100644
index 000000000..ec8036a35
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/include/mach/sys_proto.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init.S b/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init.S
new file mode 100644
index 000000000..eb6012a87
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init.S
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.Iwamatsu.yj@renesas.com>
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	ldr		r0, =MERAM_BASE
+	mov		r1, #0x0
+	str		r1, [r0]
+
+	mrc		p15, 0, r0, c0, c0, 5
+	ands	r0, r0, #0xF
+	beq		lowlevel_init__
+	b		wait_interrupt
+
+	.pool
+	.align 4
+
+wait_interrupt:
+#ifdef ICCICR
+	ldr     r1, =ICCICR
+	mov     r2, #0x0
+	str     r2, [r1]
+	mov     r2, #0xF0
+	adds    r1, r1, #4 /* ICCPMR */
+	str     r2, [r1]
+	ldr     r1, =ICCICR
+	mov     r2, #0x1
+	str     r2, [r1]
+#endif
+
+wait_loop:
+	.long	0xE320F003 /* wfi */
+
+	ldr		r2, [r1, #0xC]
+	str		r2, [r1, #0x10]
+
+	ldr		r0, =MERAM_BASE
+	ldr		r2, [r0]
+	cmp		r2, #0
+	movne	pc, r2
+
+	b		wait_loop
+
+wait_loop_end:
+	.pool
+	.align 4
+
+lowlevel_init__:
+
+	mov r0, #0x200000
+
+loop0:
+	subs r0, r0, #1
+	bne  loop0
+
+	ldr sp, MERAM_STACK
+	b s_init
+
+	.pool
+	.align 4
+
+ENDPROC(lowlevel_init)
+	.ltorg
+
+MERAM_STACK:
+	.word LOW_LEVEL_MERAM_STACK
diff --git a/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init_ca15.S b/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init_ca15.S
new file mode 100644
index 000000000..967fb027a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init_ca15.S
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
+ *     This file is lager low level initialize.
+ *
+ * Copyright (C) 2013, 2014 Renesas Electronics Corporation
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+#ifndef CONFIG_SPL_BUILD
+	mrc	p15, 0, r4, c0, c0, 5 /* mpidr */
+	orr	r4, r4, r4, lsr #6
+	and	r4, r4, #7 /* id 0-3 = ca15.0,1,2,3 */
+
+	b do_lowlevel_init
+
+	.pool
+
+/*
+ * CPU ID #1-#3 come here
+ */
+	.align  4
+do_cpu_waiting:
+	ldr	r1, =0xe6180000 /* sysc */
+1:	ldr	r0, [r1, #0x20] /* sbar */
+	tst	r0, r0
+	beq	1b
+	bx	r0
+
+/*
+ * Only CPU ID #0 comes here
+ */
+	.align  4
+do_lowlevel_init:
+	ldr	r2, =0xFF000044		/* PRR */
+	ldr	r1, [r2]
+	and	r1, r1, #0x7F00
+	lsrs	r1, r1, #8
+	cmp	r1, #0x4C		/* 0x4C is ID of r8a7794 */
+	beq	_enable_actlr_smp
+
+	/* surpress wfe if ca15 */
+	tst r4, #4
+	mrceq p15, 0, r0, c1, c0, 1	/* actlr */
+	orreq r0, r0, #(1<<7)
+	mcreq p15, 0, r0, c1, c0, 1
+
+	/* and set l2 latency */
+	mrc p15, 0, r0, c0, c0, 5	/* r0 = MPIDR */
+	and r0, r0, #0xf00
+	lsr r0, r0, #8
+	tst r0, #1			/* only need for cluster 0 */
+	bne _exit_init_l2_a15
+
+	mrc p15, 1, r0, c9, c0, 2	/* r0 = L2CTLR */
+	and r1, r0, #7
+	cmp r1, #3			/* has already been set up */
+	bicne r0, r0, #0xe7
+	orrne r0, r0, #0x83		/* L2CTLR[7:6] + L2CTLR[2:0] */
+#if defined(CONFIG_R8A7790)
+	orrne r0, r0, #0x20		/* L2CTLR[5] */
+#endif
+	mcrne p15, 1, r0, c9, c0, 2
+
+	b	_exit_init_l2_a15
+
+_enable_actlr_smp: /* R8A7794 only (CA7) */
+#ifndef CONFIG_DCACHE_OFF
+	mrc    p15, 0, r0, c1, c0, 1
+	orr    r0, r0, #0x40
+	mcr    p15, 0, r0, c1, c0, 1
+#endif
+
+_exit_init_l2_a15:
+	ldr	r3, =(CONFIG_SYS_INIT_SP_ADDR)
+	sub	sp, r3, #4
+	str	lr, [sp]
+
+	/* initialize system */
+	bl s_init
+
+	ldr	lr, [sp]
+#endif
+	mov	pc, lr
+	nop
+ENDPROC(lowlevel_init)
+	.ltorg
diff --git a/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init_gen3.S b/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init_gen3.S
new file mode 100644
index 000000000..1df2c4034
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/lowlevel_init_gen3.S
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * arch/arm/cpu/armv8/rcar_gen3/lowlevel_init.S
+ *	This file is lowlevel initialize routine.
+ *
+ * (C) Copyright 2015 Renesas Electronics Corporation
+ *
+ * This file is based on the arch/arm/cpu/armv8/start.S
+ *
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+.align 8
+.globl	rcar_atf_boot_args
+rcar_atf_boot_args:
+	.dword 0
+	.dword 0
+	.dword 0
+	.dword 0
+
+ENTRY(save_boot_params)
+	adr	x8, rcar_atf_boot_args
+	stp	x0, x1, [x8], #16
+	stp	x2, x3, [x8], #16
+	b	save_boot_params_ret
+ENDPROC(save_boot_params)
+
+.pushsection .text.s_init, "ax"
+WEAK(s_init)
+	ret
+ENDPROC(s_init)
+.popsection
+
+ENTRY(lowlevel_init)
+	mov	x29, lr			/* Save LR */
+
+#ifndef CONFIG_ARMV8_MULTIENTRY
+	/*
+	 * For single-entry systems the lowlevel init is very simple.
+	 */
+	ldr	x0, =GICD_BASE
+	bl	gic_init_secure
+
+#else /* CONFIG_ARMV8_MULTIENTRY is set */
+
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	branch_if_slave x0, 1f
+	ldr	x0, =GICD_BASE
+	bl	gic_init_secure
+1:
+#if defined(CONFIG_GICV3)
+	ldr	x0, =GICR_BASE
+	bl	gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+	ldr	x0, =GICD_BASE
+	ldr	x1, =GICC_BASE
+	bl	gic_init_secure_percpu
+#endif
+#endif
+
+	branch_if_master x0, x1, 2f
+
+	/*
+	 * Slave should wait for master clearing spin table.
+	 * This sync prevent salves observing incorrect
+	 * value of spin table and jumping to wrong place.
+	 */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_GICV2
+	ldr	x0, =GICC_BASE
+#endif
+	bl	gic_wait_for_interrupt
+#endif
+
+	/*
+	 * All slaves will enter EL2 and optionally EL1.
+	 */
+	adr	x4, lowlevel_in_el2
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el2
+
+lowlevel_in_el2:
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x4, lowlevel_in_el1
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el1
+
+lowlevel_in_el1:
+#endif
+#endif /* CONFIG_ARMV8_MULTIENTRY */
+
+	bl      s_init
+
+2:
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-rmobile/memmap-gen3.c b/roms/u-boot/arch/arm/mach-rmobile/memmap-gen3.c
new file mode 100644
index 000000000..a68eb806b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/memmap-gen3.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Renesas RCar Gen3 memory map tables
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/armv8/mmu.h>
+#include <asm/global_data.h>
+
+#define GEN3_NR_REGIONS 16
+
+static struct mm_region gen3_mem_map[GEN3_NR_REGIONS] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0x03F00000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x47E00000UL,
+		.phys = 0x47E00000UL,
+		.size = 0x78200000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xc0000000UL,
+		.phys = 0xc0000000UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x100000000UL,
+		.phys = 0x100000000UL,
+		.size = 0xf00000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = gen3_mem_map;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void enable_caches(void)
+{
+	u64 start, size;
+	int bank, i = 0;
+
+	/* Create map for RPC access */
+	gen3_mem_map[i].virt = 0x0ULL;
+	gen3_mem_map[i].phys = 0x0ULL;
+	gen3_mem_map[i].size = 0x40000000ULL;
+	gen3_mem_map[i].attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+				PTE_BLOCK_NON_SHARE |
+				PTE_BLOCK_PXN | PTE_BLOCK_UXN;
+	i++;
+
+	/* Generate entires for DRAM in 32bit address space */
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		start = gd->bd->bi_dram[bank].start;
+		size = gd->bd->bi_dram[bank].size;
+
+		/* Skip empty DRAM banks */
+		if (!size)
+			continue;
+
+		/* Skip DRAM above 4 GiB */
+		if (start >> 32ULL)
+			continue;
+
+		/* Mark memory reserved by ATF as cacheable too. */
+		if (start == 0x48000000) {
+			/* Unmark protection area (0x43F00000 to 0x47DFFFFF) */
+			gen3_mem_map[i].virt = 0x40000000ULL;
+			gen3_mem_map[i].phys = 0x40000000ULL;
+			gen3_mem_map[i].size = 0x03F00000ULL;
+			gen3_mem_map[i].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+						PTE_BLOCK_INNER_SHARE;
+			i++;
+
+			start = 0x47E00000ULL;
+			size += 0x00200000ULL;
+		}
+
+		gen3_mem_map[i].virt = start;
+		gen3_mem_map[i].phys = start;
+		gen3_mem_map[i].size = size;
+		gen3_mem_map[i].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+					PTE_BLOCK_INNER_SHARE;
+		i++;
+	}
+
+	/* Create map for register access */
+	gen3_mem_map[i].virt = 0xc0000000ULL;
+	gen3_mem_map[i].phys = 0xc0000000ULL;
+	gen3_mem_map[i].size = 0x40000000ULL;
+	gen3_mem_map[i].attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+				PTE_BLOCK_NON_SHARE |
+				PTE_BLOCK_PXN | PTE_BLOCK_UXN;
+	i++;
+
+	/* Generate entires for DRAM in 64bit address space */
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		start = gd->bd->bi_dram[bank].start;
+		size = gd->bd->bi_dram[bank].size;
+
+		/* Skip empty DRAM banks */
+		if (!size)
+			continue;
+
+		/* Skip DRAM below 4 GiB */
+		if (!(start >> 32ULL))
+			continue;
+
+		gen3_mem_map[i].virt = start;
+		gen3_mem_map[i].phys = start;
+		gen3_mem_map[i].size = size;
+		gen3_mem_map[i].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+					PTE_BLOCK_INNER_SHARE;
+		i++;
+	}
+
+	/* Zero out the remaining regions. */
+	for (; i < GEN3_NR_REGIONS; i++) {
+		gen3_mem_map[i].virt = 0;
+		gen3_mem_map[i].phys = 0;
+		gen3_mem_map[i].size = 0;
+		gen3_mem_map[i].attrs = 0;
+	}
+
+	if (!icache_status())
+		icache_enable();
+
+	dcache_enable();
+}
diff --git a/roms/u-boot/arch/arm/mach-rmobile/pfc-r8a7740.c b/roms/u-boot/arch/arm/mach-rmobile/pfc-r8a7740.c
new file mode 100644
index 000000000..5d42a6826
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/pfc-r8a7740.c
@@ -0,0 +1,2612 @@
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+#include <asm/arch/irqs.h>
+
+#define CPU_ALL_PORT(fn, pfx, sfx)					\
+	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx),	PORT_90(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##20, sfx),					\
+	PORT_1(fn, pfx##210, sfx),	PORT_1(fn, pfx##211, sfx)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	/* PORT0_DATA -> PORT211_DATA */
+	PINMUX_DATA_BEGIN,
+	PORT_ALL(DATA),
+	PINMUX_DATA_END,
+
+	/* PORT0_IN -> PORT211_IN */
+	PINMUX_INPUT_BEGIN,
+	PORT_ALL(IN),
+	PINMUX_INPUT_END,
+
+	/* PORT0_IN_PU -> PORT211_IN_PU */
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_ALL(IN_PU),
+	PINMUX_INPUT_PULLUP_END,
+
+	/* PORT0_IN_PD -> PORT211_IN_PD */
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_ALL(IN_PD),
+	PINMUX_INPUT_PULLDOWN_END,
+
+	/* PORT0_OUT -> PORT211_OUT */
+	PINMUX_OUTPUT_BEGIN,
+	PORT_ALL(OUT),
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_ALL(FN_IN),	/* PORT0_FN_IN -> PORT211_FN_IN */
+	PORT_ALL(FN_OUT),	/* PORT0_FN_OUT -> PORT211_FN_OUT */
+	PORT_ALL(FN0),		/* PORT0_FN0 -> PORT211_FN0 */
+	PORT_ALL(FN1),		/* PORT0_FN1 -> PORT211_FN1 */
+	PORT_ALL(FN2),		/* PORT0_FN2 -> PORT211_FN2 */
+	PORT_ALL(FN3),		/* PORT0_FN3 -> PORT211_FN3 */
+	PORT_ALL(FN4),		/* PORT0_FN4 -> PORT211_FN4 */
+	PORT_ALL(FN5),		/* PORT0_FN5 -> PORT211_FN5 */
+	PORT_ALL(FN6),		/* PORT0_FN6 -> PORT211_FN6 */
+	PORT_ALL(FN7),		/* PORT0_FN7 -> PORT211_FN7 */
+
+	MSEL1CR_31_0,	MSEL1CR_31_1,
+	MSEL1CR_30_0,	MSEL1CR_30_1,
+	MSEL1CR_29_0,	MSEL1CR_29_1,
+	MSEL1CR_28_0,	MSEL1CR_28_1,
+	MSEL1CR_27_0,	MSEL1CR_27_1,
+	MSEL1CR_26_0,	MSEL1CR_26_1,
+	MSEL1CR_16_0,	MSEL1CR_16_1,
+	MSEL1CR_15_0,	MSEL1CR_15_1,
+	MSEL1CR_14_0,	MSEL1CR_14_1,
+	MSEL1CR_13_0,	MSEL1CR_13_1,
+	MSEL1CR_12_0,	MSEL1CR_12_1,
+	MSEL1CR_9_0,	MSEL1CR_9_1,
+	MSEL1CR_7_0,	MSEL1CR_7_1,
+	MSEL1CR_6_0,	MSEL1CR_6_1,
+	MSEL1CR_5_0,	MSEL1CR_5_1,
+	MSEL1CR_4_0,	MSEL1CR_4_1,
+	MSEL1CR_3_0,	MSEL1CR_3_1,
+	MSEL1CR_2_0,	MSEL1CR_2_1,
+	MSEL1CR_0_0,	MSEL1CR_0_1,
+
+	MSEL3CR_15_0,	MSEL3CR_15_1, /* Trace / Debug ? */
+	MSEL3CR_6_0,	MSEL3CR_6_1,
+
+	MSEL4CR_19_0,	MSEL4CR_19_1,
+	MSEL4CR_18_0,	MSEL4CR_18_1,
+	MSEL4CR_15_0,	MSEL4CR_15_1,
+	MSEL4CR_10_0,	MSEL4CR_10_1,
+	MSEL4CR_6_0,	MSEL4CR_6_1,
+	MSEL4CR_4_0,	MSEL4CR_4_1,
+	MSEL4CR_1_0,	MSEL4CR_1_1,
+
+	MSEL5CR_31_0,	MSEL5CR_31_1, /* irq/fiq output */
+	MSEL5CR_30_0,	MSEL5CR_30_1,
+	MSEL5CR_29_0,	MSEL5CR_29_1,
+	MSEL5CR_27_0,	MSEL5CR_27_1,
+	MSEL5CR_25_0,	MSEL5CR_25_1,
+	MSEL5CR_23_0,	MSEL5CR_23_1,
+	MSEL5CR_21_0,	MSEL5CR_21_1,
+	MSEL5CR_19_0,	MSEL5CR_19_1,
+	MSEL5CR_17_0,	MSEL5CR_17_1,
+	MSEL5CR_15_0,	MSEL5CR_15_1,
+	MSEL5CR_14_0,	MSEL5CR_14_1,
+	MSEL5CR_13_0,	MSEL5CR_13_1,
+	MSEL5CR_12_0,	MSEL5CR_12_1,
+	MSEL5CR_11_0,	MSEL5CR_11_1,
+	MSEL5CR_10_0,	MSEL5CR_10_1,
+	MSEL5CR_8_0,	MSEL5CR_8_1,
+	MSEL5CR_7_0,	MSEL5CR_7_1,
+	MSEL5CR_6_0,	MSEL5CR_6_1,
+	MSEL5CR_5_0,	MSEL5CR_5_1,
+	MSEL5CR_4_0,	MSEL5CR_4_1,
+	MSEL5CR_3_0,	MSEL5CR_3_1,
+	MSEL5CR_2_0,	MSEL5CR_2_1,
+	MSEL5CR_0_0,	MSEL5CR_0_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+
+	/* IRQ */
+	IRQ0_PORT2_MARK,	IRQ0_PORT13_MARK,
+	IRQ1_MARK,
+	IRQ2_PORT11_MARK,	IRQ2_PORT12_MARK,
+	IRQ3_PORT10_MARK,	IRQ3_PORT14_MARK,
+	IRQ4_PORT15_MARK,	IRQ4_PORT172_MARK,
+	IRQ5_PORT0_MARK,	IRQ5_PORT1_MARK,
+	IRQ6_PORT121_MARK,	IRQ6_PORT173_MARK,
+	IRQ7_PORT120_MARK,	IRQ7_PORT209_MARK,
+	IRQ8_MARK,
+	IRQ9_PORT118_MARK,	IRQ9_PORT210_MARK,
+	IRQ10_MARK,
+	IRQ11_MARK,
+	IRQ12_PORT42_MARK,	IRQ12_PORT97_MARK,
+	IRQ13_PORT64_MARK,	IRQ13_PORT98_MARK,
+	IRQ14_PORT63_MARK,	IRQ14_PORT99_MARK,
+	IRQ15_PORT62_MARK,	IRQ15_PORT100_MARK,
+	IRQ16_PORT68_MARK,	IRQ16_PORT211_MARK,
+	IRQ17_MARK,
+	IRQ18_MARK,
+	IRQ19_MARK,
+	IRQ20_MARK,
+	IRQ21_MARK,
+	IRQ22_MARK,
+	IRQ23_MARK,
+	IRQ24_MARK,
+	IRQ25_MARK,
+	IRQ26_PORT58_MARK,	IRQ26_PORT81_MARK,
+	IRQ27_PORT57_MARK,	IRQ27_PORT168_MARK,
+	IRQ28_PORT56_MARK,	IRQ28_PORT169_MARK,
+	IRQ29_PORT50_MARK,	IRQ29_PORT170_MARK,
+	IRQ30_PORT49_MARK,	IRQ30_PORT171_MARK,
+	IRQ31_PORT41_MARK,	IRQ31_PORT167_MARK,
+
+	/* Function */
+
+	/* DBGT */
+	DBGMDT2_MARK,	DBGMDT1_MARK,	DBGMDT0_MARK,
+	DBGMD10_MARK,	DBGMD11_MARK,	DBGMD20_MARK,
+	DBGMD21_MARK,
+
+	/* FSI */
+	FSIAISLD_PORT0_MARK,	/* FSIAISLD Port 0/5 */
+	FSIAISLD_PORT5_MARK,
+	FSIASPDIF_PORT9_MARK,	/* FSIASPDIF Port 9/18 */
+	FSIASPDIF_PORT18_MARK,
+	FSIAOSLD1_MARK,	FSIAOSLD2_MARK,	FSIAOLR_MARK,
+	FSIAOBT_MARK,	FSIAOSLD_MARK,	FSIAOMC_MARK,
+	FSIACK_MARK,	FSIAILR_MARK,	FSIAIBT_MARK,
+
+	/* FMSI */
+	FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */
+	FMSISLD_PORT6_MARK,
+	FMSIILR_MARK,	FMSIIBT_MARK,	FMSIOLR_MARK,	FMSIOBT_MARK,
+	FMSICK_MARK,	FMSOILR_MARK,	FMSOIBT_MARK,	FMSOOLR_MARK,
+	FMSOOBT_MARK,	FMSOSLD_MARK,	FMSOCK_MARK,
+
+	/* SCIFA0 */
+	SCIFA0_SCK_MARK,	SCIFA0_CTS_MARK,	SCIFA0_RTS_MARK,
+	SCIFA0_RXD_MARK,	SCIFA0_TXD_MARK,
+
+	/* SCIFA1 */
+	SCIFA1_CTS_MARK,	SCIFA1_SCK_MARK,	SCIFA1_RXD_MARK,
+	SCIFA1_TXD_MARK,	SCIFA1_RTS_MARK,
+
+	/* SCIFA2 */
+	SCIFA2_SCK_PORT22_MARK, /* SCIFA2_SCK Port 22/199 */
+	SCIFA2_SCK_PORT199_MARK,
+	SCIFA2_RXD_MARK,	SCIFA2_TXD_MARK,
+	SCIFA2_CTS_MARK,	SCIFA2_RTS_MARK,
+
+	/* SCIFA3 */
+	SCIFA3_RTS_PORT105_MARK, /* MSEL5CR_8_0 */
+	SCIFA3_SCK_PORT116_MARK,
+	SCIFA3_CTS_PORT117_MARK,
+	SCIFA3_RXD_PORT174_MARK,
+	SCIFA3_TXD_PORT175_MARK,
+
+	SCIFA3_RTS_PORT161_MARK, /* MSEL5CR_8_1 */
+	SCIFA3_SCK_PORT158_MARK,
+	SCIFA3_CTS_PORT162_MARK,
+	SCIFA3_RXD_PORT159_MARK,
+	SCIFA3_TXD_PORT160_MARK,
+
+	/* SCIFA4 */
+	SCIFA4_RXD_PORT12_MARK, /* MSEL5CR[12:11] = 00 */
+	SCIFA4_TXD_PORT13_MARK,
+
+	SCIFA4_RXD_PORT204_MARK, /* MSEL5CR[12:11] = 01 */
+	SCIFA4_TXD_PORT203_MARK,
+
+	SCIFA4_RXD_PORT94_MARK, /* MSEL5CR[12:11] = 10 */
+	SCIFA4_TXD_PORT93_MARK,
+
+	SCIFA4_SCK_PORT21_MARK, /* SCIFA4_SCK Port 21/205 */
+	SCIFA4_SCK_PORT205_MARK,
+
+	/* SCIFA5 */
+	SCIFA5_TXD_PORT20_MARK, /* MSEL5CR[15:14] = 00 */
+	SCIFA5_RXD_PORT10_MARK,
+
+	SCIFA5_RXD_PORT207_MARK, /* MSEL5CR[15:14] = 01 */
+	SCIFA5_TXD_PORT208_MARK,
+
+	SCIFA5_TXD_PORT91_MARK, /* MSEL5CR[15:14] = 10 */
+	SCIFA5_RXD_PORT92_MARK,
+
+	SCIFA5_SCK_PORT23_MARK, /* SCIFA5_SCK Port 23/206 */
+	SCIFA5_SCK_PORT206_MARK,
+
+	/* SCIFA6 */
+	SCIFA6_SCK_MARK,	SCIFA6_RXD_MARK,	SCIFA6_TXD_MARK,
+
+	/* SCIFA7 */
+	SCIFA7_TXD_MARK,	SCIFA7_RXD_MARK,
+
+	/* SCIFAB */
+	SCIFB_SCK_PORT190_MARK, /* MSEL5CR_17_0 */
+	SCIFB_RXD_PORT191_MARK,
+	SCIFB_TXD_PORT192_MARK,
+	SCIFB_RTS_PORT186_MARK,
+	SCIFB_CTS_PORT187_MARK,
+
+	SCIFB_SCK_PORT2_MARK, /* MSEL5CR_17_1 */
+	SCIFB_RXD_PORT3_MARK,
+	SCIFB_TXD_PORT4_MARK,
+	SCIFB_RTS_PORT172_MARK,
+	SCIFB_CTS_PORT173_MARK,
+
+	/* LCD0 */
+	LCDC0_SELECT_MARK,
+
+	LCD0_D0_MARK,	LCD0_D1_MARK,	LCD0_D2_MARK,	LCD0_D3_MARK,
+	LCD0_D4_MARK,	LCD0_D5_MARK,	LCD0_D6_MARK,	LCD0_D7_MARK,
+	LCD0_D8_MARK,	LCD0_D9_MARK,	LCD0_D10_MARK,	LCD0_D11_MARK,
+	LCD0_D12_MARK,	LCD0_D13_MARK,	LCD0_D14_MARK,	LCD0_D15_MARK,
+	LCD0_D16_MARK,	LCD0_D17_MARK,
+	LCD0_DON_MARK,	LCD0_VCPWC_MARK,	LCD0_VEPWC_MARK,
+	LCD0_DCK_MARK,	LCD0_VSYN_MARK,	/* for RGB */
+	LCD0_HSYN_MARK,	LCD0_DISP_MARK,	/* for RGB */
+	LCD0_WR_MARK,	LCD0_RD_MARK,	/* for SYS */
+	LCD0_CS_MARK,	LCD0_RS_MARK,	/* for SYS */
+
+	LCD0_D21_PORT158_MARK,	LCD0_D23_PORT159_MARK, /* MSEL5CR_6_1 */
+	LCD0_D22_PORT160_MARK,	LCD0_D20_PORT161_MARK,
+	LCD0_D19_PORT162_MARK,	LCD0_D18_PORT163_MARK,
+	LCD0_LCLK_PORT165_MARK,
+
+	LCD0_D18_PORT40_MARK,	LCD0_D22_PORT0_MARK, /* MSEL5CR_6_0 */
+	LCD0_D23_PORT1_MARK,	LCD0_D21_PORT2_MARK,
+	LCD0_D20_PORT3_MARK,	LCD0_D19_PORT4_MARK,
+	LCD0_LCLK_PORT102_MARK,
+
+	/* LCD1 */
+	LCDC1_SELECT_MARK,
+
+	LCD1_D0_MARK,	LCD1_D1_MARK,	LCD1_D2_MARK,	LCD1_D3_MARK,
+	LCD1_D4_MARK,	LCD1_D5_MARK,	LCD1_D6_MARK,	LCD1_D7_MARK,
+	LCD1_D8_MARK,	LCD1_D9_MARK,	LCD1_D10_MARK,	LCD1_D11_MARK,
+	LCD1_D12_MARK,	LCD1_D13_MARK,	LCD1_D14_MARK,	LCD1_D15_MARK,
+	LCD1_D16_MARK,	LCD1_D17_MARK,	LCD1_D18_MARK,	LCD1_D19_MARK,
+	LCD1_D20_MARK,	LCD1_D21_MARK,	LCD1_D22_MARK,	LCD1_D23_MARK,
+	LCD1_DON_MARK,	LCD1_VCPWC_MARK,
+	LCD1_LCLK_MARK,	LCD1_VEPWC_MARK,
+
+	LCD1_DCK_MARK,	LCD1_VSYN_MARK,	/* for RGB */
+	LCD1_HSYN_MARK,	LCD1_DISP_MARK,	/* for RGB */
+	LCD1_RS_MARK,	LCD1_CS_MARK,	/* for SYS */
+	LCD1_RD_MARK,	LCD1_WR_MARK,	/* for SYS */
+
+	/* RSPI */
+	RSPI_SSL0_A_MARK,	RSPI_SSL1_A_MARK,	RSPI_SSL2_A_MARK,
+	RSPI_SSL3_A_MARK,	RSPI_CK_A_MARK,		RSPI_MOSI_A_MARK,
+	RSPI_MISO_A_MARK,
+
+	/* VIO CKO */
+	VIO_CKO1_MARK, /* needs fixup */
+	VIO_CKO2_MARK,
+	VIO_CKO_1_MARK,
+	VIO_CKO_MARK,
+
+	/* VIO0 */
+	VIO0_D0_MARK,	VIO0_D1_MARK,	VIO0_D2_MARK,	VIO0_D3_MARK,
+	VIO0_D4_MARK,	VIO0_D5_MARK,	VIO0_D6_MARK,	VIO0_D7_MARK,
+	VIO0_D8_MARK,	VIO0_D9_MARK,	VIO0_D10_MARK,	VIO0_D11_MARK,
+	VIO0_D12_MARK,	VIO0_VD_MARK,	VIO0_HD_MARK,	VIO0_CLK_MARK,
+	VIO0_FIELD_MARK,
+
+	VIO0_D13_PORT26_MARK, /* MSEL5CR_27_0 */
+	VIO0_D14_PORT25_MARK,
+	VIO0_D15_PORT24_MARK,
+
+	VIO0_D13_PORT22_MARK, /* MSEL5CR_27_1 */
+	VIO0_D14_PORT95_MARK,
+	VIO0_D15_PORT96_MARK,
+
+	/* VIO1 */
+	VIO1_D0_MARK,	VIO1_D1_MARK,	VIO1_D2_MARK,	VIO1_D3_MARK,
+	VIO1_D4_MARK,	VIO1_D5_MARK,	VIO1_D6_MARK,	VIO1_D7_MARK,
+	VIO1_VD_MARK,	VIO1_HD_MARK,	VIO1_CLK_MARK,	VIO1_FIELD_MARK,
+
+	/* TPU0 */
+	TPU0TO0_MARK,	TPU0TO1_MARK,	TPU0TO3_MARK,
+	TPU0TO2_PORT66_MARK, /* TPU0TO2 Port 66/202 */
+	TPU0TO2_PORT202_MARK,
+
+	/* SSP1 0 */
+	STP0_IPD0_MARK,	STP0_IPD1_MARK,	STP0_IPD2_MARK,	STP0_IPD3_MARK,
+	STP0_IPD4_MARK,	STP0_IPD5_MARK,	STP0_IPD6_MARK,	STP0_IPD7_MARK,
+	STP0_IPEN_MARK,	STP0_IPCLK_MARK,	STP0_IPSYNC_MARK,
+
+	/* SSP1 1 */
+	STP1_IPD1_MARK,	STP1_IPD2_MARK,	STP1_IPD3_MARK,	STP1_IPD4_MARK,
+	STP1_IPD5_MARK,	STP1_IPD6_MARK,	STP1_IPD7_MARK,	STP1_IPCLK_MARK,
+	STP1_IPSYNC_MARK,
+
+	STP1_IPD0_PORT186_MARK, /* MSEL5CR_23_0 */
+	STP1_IPEN_PORT187_MARK,
+
+	STP1_IPD0_PORT194_MARK, /* MSEL5CR_23_1 */
+	STP1_IPEN_PORT193_MARK,
+
+	/* SIM */
+	SIM_RST_MARK,	SIM_CLK_MARK,
+	SIM_D_PORT22_MARK, /* SIM_D  Port 22/199 */
+	SIM_D_PORT199_MARK,
+
+	/* SDHI0 */
+	SDHI0_D0_MARK,	SDHI0_D1_MARK,	SDHI0_D2_MARK,	SDHI0_D3_MARK,
+	SDHI0_CD_MARK,	SDHI0_WP_MARK,	SDHI0_CMD_MARK,	SDHI0_CLK_MARK,
+
+	/* SDHI1 */
+	SDHI1_D0_MARK,	SDHI1_D1_MARK,	SDHI1_D2_MARK,	SDHI1_D3_MARK,
+	SDHI1_CD_MARK,	SDHI1_WP_MARK,	SDHI1_CMD_MARK,	SDHI1_CLK_MARK,
+
+	/* SDHI2 */
+	SDHI2_D0_MARK,	SDHI2_D1_MARK,	SDHI2_D2_MARK,	SDHI2_D3_MARK,
+	SDHI2_CLK_MARK,	SDHI2_CMD_MARK,
+
+	SDHI2_CD_PORT24_MARK, /* MSEL5CR_19_0 */
+	SDHI2_WP_PORT25_MARK,
+
+	SDHI2_WP_PORT177_MARK, /* MSEL5CR_19_1 */
+	SDHI2_CD_PORT202_MARK,
+
+	/* MSIOF2 */
+	MSIOF2_TXD_MARK,	MSIOF2_RXD_MARK,	MSIOF2_TSCK_MARK,
+	MSIOF2_SS2_MARK,	MSIOF2_TSYNC_MARK,	MSIOF2_SS1_MARK,
+	MSIOF2_MCK1_MARK,	MSIOF2_MCK0_MARK,	MSIOF2_RSYNC_MARK,
+	MSIOF2_RSCK_MARK,
+
+	/* KEYSC */
+	KEYIN4_MARK,	KEYIN5_MARK,	KEYIN6_MARK,	KEYIN7_MARK,
+	KEYOUT0_MARK,	KEYOUT1_MARK,	KEYOUT2_MARK,	KEYOUT3_MARK,
+	KEYOUT4_MARK,	KEYOUT5_MARK,	KEYOUT6_MARK,	KEYOUT7_MARK,
+
+	KEYIN0_PORT43_MARK, /* MSEL4CR_18_0 */
+	KEYIN1_PORT44_MARK,
+	KEYIN2_PORT45_MARK,
+	KEYIN3_PORT46_MARK,
+
+	KEYIN0_PORT58_MARK, /* MSEL4CR_18_1 */
+	KEYIN1_PORT57_MARK,
+	KEYIN2_PORT56_MARK,
+	KEYIN3_PORT55_MARK,
+
+	/* VOU */
+	DV_D0_MARK,	DV_D1_MARK,	DV_D2_MARK,	DV_D3_MARK,
+	DV_D4_MARK,	DV_D5_MARK,	DV_D6_MARK,	DV_D7_MARK,
+	DV_D8_MARK,	DV_D9_MARK,	DV_D10_MARK,	DV_D11_MARK,
+	DV_D12_MARK,	DV_D13_MARK,	DV_D14_MARK,	DV_D15_MARK,
+	DV_CLK_MARK,	DV_VSYNC_MARK,	DV_HSYNC_MARK,
+
+	/* MEMC */
+	MEMC_AD0_MARK,	MEMC_AD1_MARK,	MEMC_AD2_MARK,	MEMC_AD3_MARK,
+	MEMC_AD4_MARK,	MEMC_AD5_MARK,	MEMC_AD6_MARK,	MEMC_AD7_MARK,
+	MEMC_AD8_MARK,	MEMC_AD9_MARK,	MEMC_AD10_MARK,	MEMC_AD11_MARK,
+	MEMC_AD12_MARK,	MEMC_AD13_MARK,	MEMC_AD14_MARK,	MEMC_AD15_MARK,
+	MEMC_CS0_MARK,	MEMC_INT_MARK,	MEMC_NWE_MARK,	MEMC_NOE_MARK,
+
+	MEMC_CS1_MARK, /* MSEL4CR_6_0 */
+	MEMC_ADV_MARK,
+	MEMC_WAIT_MARK,
+	MEMC_BUSCLK_MARK,
+
+	MEMC_A1_MARK, /* MSEL4CR_6_1 */
+	MEMC_DREQ0_MARK,
+	MEMC_DREQ1_MARK,
+	MEMC_A0_MARK,
+
+	/* MMC */
+	MMC0_D0_PORT68_MARK,	MMC0_D1_PORT69_MARK,	MMC0_D2_PORT70_MARK,
+	MMC0_D3_PORT71_MARK,	MMC0_D4_PORT72_MARK,	MMC0_D5_PORT73_MARK,
+	MMC0_D6_PORT74_MARK,	MMC0_D7_PORT75_MARK,	MMC0_CLK_PORT66_MARK,
+	MMC0_CMD_PORT67_MARK,	/* MSEL4CR_15_0 */
+
+	MMC1_D0_PORT149_MARK,	MMC1_D1_PORT148_MARK,	MMC1_D2_PORT147_MARK,
+	MMC1_D3_PORT146_MARK,	MMC1_D4_PORT145_MARK,	MMC1_D5_PORT144_MARK,
+	MMC1_D6_PORT143_MARK,	MMC1_D7_PORT142_MARK,	MMC1_CLK_PORT103_MARK,
+	MMC1_CMD_PORT104_MARK,	/* MSEL4CR_15_1 */
+
+	/* MSIOF0 */
+	MSIOF0_SS1_MARK,	MSIOF0_SS2_MARK,	MSIOF0_RXD_MARK,
+	MSIOF0_TXD_MARK,	MSIOF0_MCK0_MARK,	MSIOF0_MCK1_MARK,
+	MSIOF0_RSYNC_MARK,	MSIOF0_RSCK_MARK,	MSIOF0_TSCK_MARK,
+	MSIOF0_TSYNC_MARK,
+
+	/* MSIOF1 */
+	MSIOF1_RSCK_MARK,	MSIOF1_RSYNC_MARK,
+	MSIOF1_MCK0_MARK,	MSIOF1_MCK1_MARK,
+
+	MSIOF1_SS2_PORT116_MARK,	MSIOF1_SS1_PORT117_MARK,
+	MSIOF1_RXD_PORT118_MARK,	MSIOF1_TXD_PORT119_MARK,
+	MSIOF1_TSYNC_PORT120_MARK,
+	MSIOF1_TSCK_PORT121_MARK,	/* MSEL4CR_10_0 */
+
+	MSIOF1_SS1_PORT67_MARK,		MSIOF1_TSCK_PORT72_MARK,
+	MSIOF1_TSYNC_PORT73_MARK,	MSIOF1_TXD_PORT74_MARK,
+	MSIOF1_RXD_PORT75_MARK,
+	MSIOF1_SS2_PORT202_MARK,	/* MSEL4CR_10_1 */
+
+	/* GPIO */
+	GPO0_MARK,	GPI0_MARK,	GPO1_MARK,	GPI1_MARK,
+
+	/* USB0 */
+	USB0_OCI_MARK,	USB0_PPON_MARK,	VBUS_MARK,
+
+	/* USB1 */
+	USB1_OCI_MARK,	USB1_PPON_MARK,
+
+	/* BBIF1 */
+	BBIF1_RXD_MARK,		BBIF1_TXD_MARK,		BBIF1_TSYNC_MARK,
+	BBIF1_TSCK_MARK,	BBIF1_RSCK_MARK,	BBIF1_RSYNC_MARK,
+	BBIF1_FLOW_MARK,	BBIF1_RX_FLOW_N_MARK,
+
+	/* BBIF2 */
+	BBIF2_TXD2_PORT5_MARK, /* MSEL5CR_0_0 */
+	BBIF2_RXD2_PORT60_MARK,
+	BBIF2_TSYNC2_PORT6_MARK,
+	BBIF2_TSCK2_PORT59_MARK,
+
+	BBIF2_RXD2_PORT90_MARK, /* MSEL5CR_0_1 */
+	BBIF2_TXD2_PORT183_MARK,
+	BBIF2_TSCK2_PORT89_MARK,
+	BBIF2_TSYNC2_PORT184_MARK,
+
+	/* BSC / FLCTL / PCMCIA */
+	CS0_MARK,	CS2_MARK,	CS4_MARK,
+	CS5B_MARK,	CS6A_MARK,
+	CS5A_PORT105_MARK, /* CS5A PORT 19/105 */
+	CS5A_PORT19_MARK,
+	IOIS16_MARK, /* ? */
+
+	A0_MARK,	A1_MARK,	A2_MARK,	A3_MARK,
+	A4_FOE_MARK,	/* share with FLCTL */
+	A5_FCDE_MARK,	/* share with FLCTL */
+	A6_MARK,	A7_MARK,	A8_MARK,	A9_MARK,
+	A10_MARK,	A11_MARK,	A12_MARK,	A13_MARK,
+	A14_MARK,	A15_MARK,	A16_MARK,	A17_MARK,
+	A18_MARK,	A19_MARK,	A20_MARK,	A21_MARK,
+	A22_MARK,	A23_MARK,	A24_MARK,	A25_MARK,
+	A26_MARK,
+
+	D0_NAF0_MARK,	D1_NAF1_MARK,	D2_NAF2_MARK,	/* share with FLCTL */
+	D3_NAF3_MARK,	D4_NAF4_MARK,	D5_NAF5_MARK,	/* share with FLCTL */
+	D6_NAF6_MARK,	D7_NAF7_MARK,	D8_NAF8_MARK,	/* share with FLCTL */
+	D9_NAF9_MARK,	D10_NAF10_MARK,	D11_NAF11_MARK,	/* share with FLCTL */
+	D12_NAF12_MARK,	D13_NAF13_MARK,	D14_NAF14_MARK,	/* share with FLCTL */
+	D15_NAF15_MARK,					/* share with FLCTL */
+	D16_MARK,	D17_MARK,	D18_MARK,	D19_MARK,
+	D20_MARK,	D21_MARK,	D22_MARK,	D23_MARK,
+	D24_MARK,	D25_MARK,	D26_MARK,	D27_MARK,
+	D28_MARK,	D29_MARK,	D30_MARK,	D31_MARK,
+
+	WE0_FWE_MARK,	/* share with FLCTL */
+	WE1_MARK,
+	WE2_ICIORD_MARK,	/* share with PCMCIA */
+	WE3_ICIOWR_MARK,	/* share with PCMCIA */
+	CKO_MARK,	BS_MARK,	RDWR_MARK,
+	RD_FSC_MARK,	/* share with FLCTL */
+	WAIT_PORT177_MARK, /* WAIT Port 90/177 */
+	WAIT_PORT90_MARK,
+
+	FCE0_MARK,	FCE1_MARK,	FRB_MARK, /* FLCTL */
+
+	/* IRDA */
+	IRDA_FIRSEL_MARK,	IRDA_IN_MARK,	IRDA_OUT_MARK,
+
+	/* ATAPI */
+	IDE_D0_MARK,	IDE_D1_MARK,	IDE_D2_MARK,	IDE_D3_MARK,
+	IDE_D4_MARK,	IDE_D5_MARK,	IDE_D6_MARK,	IDE_D7_MARK,
+	IDE_D8_MARK,	IDE_D9_MARK,	IDE_D10_MARK,	IDE_D11_MARK,
+	IDE_D12_MARK,	IDE_D13_MARK,	IDE_D14_MARK,	IDE_D15_MARK,
+	IDE_A0_MARK,	IDE_A1_MARK,	IDE_A2_MARK,	IDE_CS0_MARK,
+	IDE_CS1_MARK,	IDE_IOWR_MARK,	IDE_IORD_MARK,	IDE_IORDY_MARK,
+	IDE_INT_MARK,		IDE_RST_MARK,		IDE_DIRECTION_MARK,
+	IDE_EXBUF_ENB_MARK,	IDE_IODACK_MARK,	IDE_IODREQ_MARK,
+
+	/* RMII */
+	RMII_CRS_DV_MARK,	RMII_RX_ER_MARK,	RMII_RXD0_MARK,
+	RMII_RXD1_MARK,		RMII_TX_EN_MARK,	RMII_TXD0_MARK,
+	RMII_MDC_MARK,		RMII_TXD1_MARK,		RMII_MDIO_MARK,
+	RMII_REF50CK_MARK,	/* for RMII */
+	RMII_REF125CK_MARK,	/* for GMII */
+
+	/* GEther */
+	ET_TX_CLK_MARK,	ET_TX_EN_MARK,	ET_ETXD0_MARK,	ET_ETXD1_MARK,
+	ET_ETXD2_MARK,	ET_ETXD3_MARK,
+	ET_ETXD4_MARK,	ET_ETXD5_MARK, /* for GEther */
+	ET_ETXD6_MARK,	ET_ETXD7_MARK, /* for GEther */
+	ET_COL_MARK,	ET_TX_ER_MARK,	ET_RX_CLK_MARK,	ET_RX_DV_MARK,
+	ET_ERXD0_MARK,	ET_ERXD1_MARK,	ET_ERXD2_MARK,	ET_ERXD3_MARK,
+	ET_ERXD4_MARK,	ET_ERXD5_MARK, /* for GEther */
+	ET_ERXD6_MARK,	ET_ERXD7_MARK, /* for GEther */
+	ET_RX_ER_MARK,	ET_CRS_MARK,		ET_MDC_MARK,	ET_MDIO_MARK,
+	ET_LINK_MARK,	ET_PHY_INT_MARK,	ET_WOL_MARK,	ET_GTX_CLK_MARK,
+
+	/* DMA0 */
+	DREQ0_MARK,	DACK0_MARK,
+
+	/* DMA1 */
+	DREQ1_MARK,	DACK1_MARK,
+
+	/* SYSC */
+	RESETOUTS_MARK,		RESETP_PULLUP_MARK,	RESETP_PLAIN_MARK,
+
+	/* IRREM */
+	IROUT_MARK,
+
+	/* SDENC */
+	SDENC_CPG_MARK,		SDENC_DV_CLKI_MARK,
+
+	/* DEBUG */
+	EDEBGREQ_PULLUP_MARK,	/* for JTAG */
+	EDEBGREQ_PULLDOWN_MARK,
+
+	TRACEAUD_FROM_VIO_MARK,	/* for TRACE/AUD */
+	TRACEAUD_FROM_LCDC0_MARK,
+	TRACEAUD_FROM_MEMC_MARK,
+
+	PINMUX_MARK_END,
+};
+
+static unsigned short pinmux_data[] = {
+	/* specify valid pin states for each pin in GPIO mode */
+
+	/* I/O and Pull U/D */
+	PORT_DATA_IO_PD(0),		PORT_DATA_IO_PD(1),
+	PORT_DATA_IO_PD(2),		PORT_DATA_IO_PD(3),
+	PORT_DATA_IO_PD(4),		PORT_DATA_IO_PD(5),
+	PORT_DATA_IO_PD(6),		PORT_DATA_IO(7),
+	PORT_DATA_IO(8),		PORT_DATA_IO(9),
+
+	PORT_DATA_IO_PD(10),		PORT_DATA_IO_PD(11),
+	PORT_DATA_IO_PD(12),		PORT_DATA_IO_PU_PD(13),
+	PORT_DATA_IO_PD(14),		PORT_DATA_IO_PD(15),
+	PORT_DATA_IO_PD(16),		PORT_DATA_IO_PD(17),
+	PORT_DATA_IO(18),		PORT_DATA_IO_PU(19),
+
+	PORT_DATA_IO_PU_PD(20),		PORT_DATA_IO_PD(21),
+	PORT_DATA_IO_PU_PD(22),		PORT_DATA_IO(23),
+	PORT_DATA_IO_PU(24),		PORT_DATA_IO_PU(25),
+	PORT_DATA_IO_PU(26),		PORT_DATA_IO_PU(27),
+	PORT_DATA_IO_PU(28),		PORT_DATA_IO_PU(29),
+
+	PORT_DATA_IO_PU(30),		PORT_DATA_IO_PD(31),
+	PORT_DATA_IO_PD(32),		PORT_DATA_IO_PD(33),
+	PORT_DATA_IO_PD(34),		PORT_DATA_IO_PU(35),
+	PORT_DATA_IO_PU(36),		PORT_DATA_IO_PD(37),
+	PORT_DATA_IO_PU(38),		PORT_DATA_IO_PD(39),
+
+	PORT_DATA_IO_PU_PD(40),		PORT_DATA_IO_PD(41),
+	PORT_DATA_IO_PD(42),		PORT_DATA_IO_PU_PD(43),
+	PORT_DATA_IO_PU_PD(44),		PORT_DATA_IO_PU_PD(45),
+	PORT_DATA_IO_PU_PD(46),		PORT_DATA_IO_PU_PD(47),
+	PORT_DATA_IO_PU_PD(48),		PORT_DATA_IO_PU_PD(49),
+
+	PORT_DATA_IO_PU_PD(50),		PORT_DATA_IO_PD(51),
+	PORT_DATA_IO_PD(52),		PORT_DATA_IO_PD(53),
+	PORT_DATA_IO_PD(54),		PORT_DATA_IO_PU_PD(55),
+	PORT_DATA_IO_PU_PD(56),		PORT_DATA_IO_PU_PD(57),
+	PORT_DATA_IO_PU_PD(58),		PORT_DATA_IO_PU_PD(59),
+
+	PORT_DATA_IO_PU_PD(60),		PORT_DATA_IO_PD(61),
+	PORT_DATA_IO_PD(62),		PORT_DATA_IO_PD(63),
+	PORT_DATA_IO_PD(64),		PORT_DATA_IO_PD(65),
+	PORT_DATA_IO_PU_PD(66),		PORT_DATA_IO_PU_PD(67),
+	PORT_DATA_IO_PU_PD(68),		PORT_DATA_IO_PU_PD(69),
+
+	PORT_DATA_IO_PU_PD(70),		PORT_DATA_IO_PU_PD(71),
+	PORT_DATA_IO_PU_PD(72),		PORT_DATA_IO_PU_PD(73),
+	PORT_DATA_IO_PU_PD(74),		PORT_DATA_IO_PU_PD(75),
+	PORT_DATA_IO_PU_PD(76),		PORT_DATA_IO_PU_PD(77),
+	PORT_DATA_IO_PU_PD(78),		PORT_DATA_IO_PU_PD(79),
+
+	PORT_DATA_IO_PU_PD(80),		PORT_DATA_IO_PU_PD(81),
+	PORT_DATA_IO(82),		PORT_DATA_IO_PU_PD(83),
+	PORT_DATA_IO(84),		PORT_DATA_IO_PD(85),
+	PORT_DATA_IO_PD(86),		PORT_DATA_IO_PD(87),
+	PORT_DATA_IO_PD(88),		PORT_DATA_IO_PD(89),
+
+	PORT_DATA_IO_PD(90),		PORT_DATA_IO_PU_PD(91),
+	PORT_DATA_IO_PU_PD(92),		PORT_DATA_IO_PU_PD(93),
+	PORT_DATA_IO_PU_PD(94),		PORT_DATA_IO_PU_PD(95),
+	PORT_DATA_IO_PU_PD(96),		PORT_DATA_IO_PU_PD(97),
+	PORT_DATA_IO_PU_PD(98),		PORT_DATA_IO_PU_PD(99),
+
+	PORT_DATA_IO_PU_PD(100),	PORT_DATA_IO(101),
+	PORT_DATA_IO_PU(102),		PORT_DATA_IO_PU_PD(103),
+	PORT_DATA_IO_PU(104),		PORT_DATA_IO_PU(105),
+	PORT_DATA_IO_PU_PD(106),	PORT_DATA_IO(107),
+	PORT_DATA_IO(108),		PORT_DATA_IO(109),
+
+	PORT_DATA_IO(110),		PORT_DATA_IO(111),
+	PORT_DATA_IO(112),		PORT_DATA_IO(113),
+	PORT_DATA_IO_PU_PD(114),	PORT_DATA_IO(115),
+	PORT_DATA_IO_PD(116),		PORT_DATA_IO_PD(117),
+	PORT_DATA_IO_PD(118),		PORT_DATA_IO_PD(119),
+
+	PORT_DATA_IO_PD(120),		PORT_DATA_IO_PD(121),
+	PORT_DATA_IO_PD(122),		PORT_DATA_IO_PD(123),
+	PORT_DATA_IO_PD(124),		PORT_DATA_IO(125),
+	PORT_DATA_IO(126),		PORT_DATA_IO(127),
+	PORT_DATA_IO(128),		PORT_DATA_IO(129),
+
+	PORT_DATA_IO(130),		PORT_DATA_IO(131),
+	PORT_DATA_IO(132),		PORT_DATA_IO(133),
+	PORT_DATA_IO(134),		PORT_DATA_IO(135),
+	PORT_DATA_IO(136),		PORT_DATA_IO(137),
+	PORT_DATA_IO(138),		PORT_DATA_IO(139),
+
+	PORT_DATA_IO(140),		PORT_DATA_IO(141),
+	PORT_DATA_IO_PU(142),		PORT_DATA_IO_PU(143),
+	PORT_DATA_IO_PU(144),		PORT_DATA_IO_PU(145),
+	PORT_DATA_IO_PU(146),		PORT_DATA_IO_PU(147),
+	PORT_DATA_IO_PU(148),		PORT_DATA_IO_PU(149),
+
+	PORT_DATA_IO_PU(150),		PORT_DATA_IO_PU(151),
+	PORT_DATA_IO_PU(152),		PORT_DATA_IO_PU(153),
+	PORT_DATA_IO_PU(154),		PORT_DATA_IO_PU(155),
+	PORT_DATA_IO_PU(156),		PORT_DATA_IO_PU(157),
+	PORT_DATA_IO_PD(158),		PORT_DATA_IO_PD(159),
+
+	PORT_DATA_IO_PU_PD(160),	PORT_DATA_IO_PD(161),
+	PORT_DATA_IO_PD(162),		PORT_DATA_IO_PD(163),
+	PORT_DATA_IO_PD(164),		PORT_DATA_IO_PD(165),
+	PORT_DATA_IO_PU(166),		PORT_DATA_IO_PU(167),
+	PORT_DATA_IO_PU(168),		PORT_DATA_IO_PU(169),
+
+	PORT_DATA_IO_PU(170),		PORT_DATA_IO_PU(171),
+	PORT_DATA_IO_PD(172),		PORT_DATA_IO_PD(173),
+	PORT_DATA_IO_PD(174),		PORT_DATA_IO_PD(175),
+	PORT_DATA_IO_PU(176),		PORT_DATA_IO_PU_PD(177),
+	PORT_DATA_IO_PU(178),		PORT_DATA_IO_PD(179),
+
+	PORT_DATA_IO_PD(180),		PORT_DATA_IO_PU(181),
+	PORT_DATA_IO_PU(182),		PORT_DATA_IO(183),
+	PORT_DATA_IO_PD(184),		PORT_DATA_IO_PD(185),
+	PORT_DATA_IO_PD(186),		PORT_DATA_IO_PD(187),
+	PORT_DATA_IO_PD(188),		PORT_DATA_IO_PD(189),
+
+	PORT_DATA_IO_PD(190),		PORT_DATA_IO_PD(191),
+	PORT_DATA_IO_PD(192),		PORT_DATA_IO_PU_PD(193),
+	PORT_DATA_IO_PU_PD(194),	PORT_DATA_IO_PD(195),
+	PORT_DATA_IO_PU_PD(196),	PORT_DATA_IO_PD(197),
+	PORT_DATA_IO_PU_PD(198),	PORT_DATA_IO_PU_PD(199),
+
+	PORT_DATA_IO_PU_PD(200),	PORT_DATA_IO_PU(201),
+	PORT_DATA_IO_PU_PD(202),	PORT_DATA_IO(203),
+	PORT_DATA_IO_PU_PD(204),	PORT_DATA_IO_PU_PD(205),
+	PORT_DATA_IO_PU_PD(206),	PORT_DATA_IO_PU_PD(207),
+	PORT_DATA_IO_PU_PD(208),	PORT_DATA_IO_PD(209),
+
+	PORT_DATA_IO_PD(210),		PORT_DATA_IO_PD(211),
+
+	/* Port0 */
+	PINMUX_DATA(DBGMDT2_MARK,		PORT0_FN1),
+	PINMUX_DATA(FSIAISLD_PORT0_MARK,	PORT0_FN2,	MSEL5CR_3_0),
+	PINMUX_DATA(FSIAOSLD1_MARK,		PORT0_FN3),
+	PINMUX_DATA(LCD0_D22_PORT0_MARK,	PORT0_FN4,	MSEL5CR_6_0),
+	PINMUX_DATA(SCIFA7_RXD_MARK,		PORT0_FN6),
+	PINMUX_DATA(LCD1_D4_MARK,		PORT0_FN7),
+	PINMUX_DATA(IRQ5_PORT0_MARK,		PORT0_FN0,	MSEL1CR_5_0),
+
+	/* Port1 */
+	PINMUX_DATA(DBGMDT1_MARK,		PORT1_FN1),
+	PINMUX_DATA(FMSISLD_PORT1_MARK,		PORT1_FN2,	MSEL5CR_5_0),
+	PINMUX_DATA(FSIAOSLD2_MARK,		PORT1_FN3),
+	PINMUX_DATA(LCD0_D23_PORT1_MARK,	PORT1_FN4,	MSEL5CR_6_0),
+	PINMUX_DATA(SCIFA7_TXD_MARK,		PORT1_FN6),
+	PINMUX_DATA(LCD1_D3_MARK,		PORT1_FN7),
+	PINMUX_DATA(IRQ5_PORT1_MARK,		PORT1_FN0,	MSEL1CR_5_1),
+
+	/* Port2 */
+	PINMUX_DATA(DBGMDT0_MARK,		PORT2_FN1),
+	PINMUX_DATA(SCIFB_SCK_PORT2_MARK,	PORT2_FN2,	MSEL5CR_17_1),
+	PINMUX_DATA(LCD0_D21_PORT2_MARK,	PORT2_FN4,	MSEL5CR_6_0),
+	PINMUX_DATA(LCD1_D2_MARK,		PORT2_FN7),
+	PINMUX_DATA(IRQ0_PORT2_MARK,		PORT2_FN0,	MSEL1CR_0_1),
+
+	/* Port3 */
+	PINMUX_DATA(DBGMD21_MARK,		PORT3_FN1),
+	PINMUX_DATA(SCIFB_RXD_PORT3_MARK,	PORT3_FN2,	MSEL5CR_17_1),
+	PINMUX_DATA(LCD0_D20_PORT3_MARK,	PORT3_FN4,	MSEL5CR_6_0),
+	PINMUX_DATA(LCD1_D1_MARK,		PORT3_FN7),
+
+	/* Port4 */
+	PINMUX_DATA(DBGMD20_MARK,		PORT4_FN1),
+	PINMUX_DATA(SCIFB_TXD_PORT4_MARK,	PORT4_FN2,	MSEL5CR_17_1),
+	PINMUX_DATA(LCD0_D19_PORT4_MARK,	PORT4_FN4,	MSEL5CR_6_0),
+	PINMUX_DATA(LCD1_D0_MARK,		PORT4_FN7),
+
+	/* Port5 */
+	PINMUX_DATA(DBGMD11_MARK,		PORT5_FN1),
+	PINMUX_DATA(BBIF2_TXD2_PORT5_MARK,	PORT5_FN2,	MSEL5CR_0_0),
+	PINMUX_DATA(FSIAISLD_PORT5_MARK,	PORT5_FN4,	MSEL5CR_3_1),
+	PINMUX_DATA(RSPI_SSL0_A_MARK,		PORT5_FN6),
+	PINMUX_DATA(LCD1_VCPWC_MARK,		PORT5_FN7),
+
+	/* Port6 */
+	PINMUX_DATA(DBGMD10_MARK,		PORT6_FN1),
+	PINMUX_DATA(BBIF2_TSYNC2_PORT6_MARK,	PORT6_FN2,	MSEL5CR_0_0),
+	PINMUX_DATA(FMSISLD_PORT6_MARK,		PORT6_FN4,	MSEL5CR_5_1),
+	PINMUX_DATA(RSPI_SSL1_A_MARK,		PORT6_FN6),
+	PINMUX_DATA(LCD1_VEPWC_MARK,		PORT6_FN7),
+
+	/* Port7 */
+	PINMUX_DATA(FSIAOLR_MARK,		PORT7_FN1),
+
+	/* Port8 */
+	PINMUX_DATA(FSIAOBT_MARK,		PORT8_FN1),
+
+	/* Port9 */
+	PINMUX_DATA(FSIAOSLD_MARK,		PORT9_FN1),
+	PINMUX_DATA(FSIASPDIF_PORT9_MARK,	PORT9_FN2,	MSEL5CR_4_0),
+
+	/* Port10 */
+	PINMUX_DATA(FSIAOMC_MARK,		PORT10_FN1),
+	PINMUX_DATA(SCIFA5_RXD_PORT10_MARK,	PORT10_FN3,	MSEL5CR_14_0,
+			MSEL5CR_15_0),
+	PINMUX_DATA(IRQ3_PORT10_MARK,		PORT10_FN0,	MSEL1CR_3_0),
+
+	/* Port11 */
+	PINMUX_DATA(FSIACK_MARK,		PORT11_FN1),
+	PINMUX_DATA(IRQ2_PORT11_MARK,		PORT11_FN0,	MSEL1CR_2_0),
+
+	/* Port12 */
+	PINMUX_DATA(FSIAILR_MARK,		PORT12_FN1),
+	PINMUX_DATA(SCIFA4_RXD_PORT12_MARK,	PORT12_FN2,	MSEL5CR_12_0,
+			MSEL5CR_11_0),
+	PINMUX_DATA(LCD1_RS_MARK,		PORT12_FN6),
+	PINMUX_DATA(LCD1_DISP_MARK,		PORT12_FN7),
+	PINMUX_DATA(IRQ2_PORT12_MARK,		PORT12_FN0,	MSEL1CR_2_1),
+
+	/* Port13 */
+	PINMUX_DATA(FSIAIBT_MARK,		PORT13_FN1),
+	PINMUX_DATA(SCIFA4_TXD_PORT13_MARK,	PORT13_FN2,	MSEL5CR_12_0,
+			MSEL5CR_11_0),
+	PINMUX_DATA(LCD1_RD_MARK,		PORT13_FN7),
+	PINMUX_DATA(IRQ0_PORT13_MARK,		PORT13_FN0,	MSEL1CR_0_0),
+
+	/* Port14 */
+	PINMUX_DATA(FMSOILR_MARK,		PORT14_FN1),
+	PINMUX_DATA(FMSIILR_MARK,		PORT14_FN2),
+	PINMUX_DATA(VIO_CKO1_MARK,		PORT14_FN3),
+	PINMUX_DATA(LCD1_D23_MARK,		PORT14_FN7),
+	PINMUX_DATA(IRQ3_PORT14_MARK,		PORT14_FN0,	MSEL1CR_3_1),
+
+	/* Port15 */
+	PINMUX_DATA(FMSOIBT_MARK,		PORT15_FN1),
+	PINMUX_DATA(FMSIIBT_MARK,		PORT15_FN2),
+	PINMUX_DATA(VIO_CKO2_MARK,		PORT15_FN3),
+	PINMUX_DATA(LCD1_D22_MARK,		PORT15_FN7),
+	PINMUX_DATA(IRQ4_PORT15_MARK,		PORT15_FN0,	MSEL1CR_4_0),
+
+	/* Port16 */
+	PINMUX_DATA(FMSOOLR_MARK,		PORT16_FN1),
+	PINMUX_DATA(FMSIOLR_MARK,		PORT16_FN2),
+
+	/* Port17 */
+	PINMUX_DATA(FMSOOBT_MARK,		PORT17_FN1),
+	PINMUX_DATA(FMSIOBT_MARK,		PORT17_FN2),
+
+	/* Port18 */
+	PINMUX_DATA(FMSOSLD_MARK,		PORT18_FN1),
+	PINMUX_DATA(FSIASPDIF_PORT18_MARK,	PORT18_FN2,	MSEL5CR_4_1),
+
+	/* Port19 */
+	PINMUX_DATA(FMSICK_MARK,		PORT19_FN1),
+	PINMUX_DATA(CS5A_PORT19_MARK,		PORT19_FN7,	MSEL5CR_2_1),
+	PINMUX_DATA(IRQ10_MARK,			PORT19_FN0),
+
+	/* Port20 */
+	PINMUX_DATA(FMSOCK_MARK,		PORT20_FN1),
+	PINMUX_DATA(SCIFA5_TXD_PORT20_MARK,	PORT20_FN3,	MSEL5CR_15_0,
+			MSEL5CR_14_0),
+	PINMUX_DATA(IRQ1_MARK,			PORT20_FN0),
+
+	/* Port21 */
+	PINMUX_DATA(SCIFA1_CTS_MARK,		PORT21_FN1),
+	PINMUX_DATA(SCIFA4_SCK_PORT21_MARK,	PORT21_FN2,	MSEL5CR_10_0),
+	PINMUX_DATA(TPU0TO1_MARK,		PORT21_FN4),
+	PINMUX_DATA(VIO1_FIELD_MARK,		PORT21_FN5),
+	PINMUX_DATA(STP0_IPD5_MARK,		PORT21_FN6),
+	PINMUX_DATA(LCD1_D10_MARK,		PORT21_FN7),
+
+	/* Port22 */
+	PINMUX_DATA(SCIFA2_SCK_PORT22_MARK,	PORT22_FN1,	MSEL5CR_7_0),
+	PINMUX_DATA(SIM_D_PORT22_MARK,		PORT22_FN4,	MSEL5CR_21_0),
+	PINMUX_DATA(VIO0_D13_PORT22_MARK,	PORT22_FN7,	MSEL5CR_27_1),
+
+	/* Port23 */
+	PINMUX_DATA(SCIFA1_RTS_MARK,		PORT23_FN1),
+	PINMUX_DATA(SCIFA5_SCK_PORT23_MARK,	PORT23_FN3,	MSEL5CR_13_0),
+	PINMUX_DATA(TPU0TO0_MARK,		PORT23_FN4),
+	PINMUX_DATA(VIO_CKO_1_MARK,		PORT23_FN5),
+	PINMUX_DATA(STP0_IPD2_MARK,		PORT23_FN6),
+	PINMUX_DATA(LCD1_D7_MARK,		PORT23_FN7),
+
+	/* Port24 */
+	PINMUX_DATA(VIO0_D15_PORT24_MARK,	PORT24_FN1,	MSEL5CR_27_0),
+	PINMUX_DATA(VIO1_D7_MARK,		PORT24_FN5),
+	PINMUX_DATA(SCIFA6_SCK_MARK,		PORT24_FN6),
+	PINMUX_DATA(SDHI2_CD_PORT24_MARK,	PORT24_FN7,	MSEL5CR_19_0),
+
+	/* Port25 */
+	PINMUX_DATA(VIO0_D14_PORT25_MARK,	PORT25_FN1,	MSEL5CR_27_0),
+	PINMUX_DATA(VIO1_D6_MARK,		PORT25_FN5),
+	PINMUX_DATA(SCIFA6_RXD_MARK,		PORT25_FN6),
+	PINMUX_DATA(SDHI2_WP_PORT25_MARK,	PORT25_FN7,	MSEL5CR_19_0),
+
+	/* Port26 */
+	PINMUX_DATA(VIO0_D13_PORT26_MARK,	PORT26_FN1,	MSEL5CR_27_0),
+	PINMUX_DATA(VIO1_D5_MARK,		PORT26_FN5),
+	PINMUX_DATA(SCIFA6_TXD_MARK,		PORT26_FN6),
+
+	/* Port27 - Port39 Function */
+	PINMUX_DATA(VIO0_D7_MARK,		PORT27_FN1),
+	PINMUX_DATA(VIO0_D6_MARK,		PORT28_FN1),
+	PINMUX_DATA(VIO0_D5_MARK,		PORT29_FN1),
+	PINMUX_DATA(VIO0_D4_MARK,		PORT30_FN1),
+	PINMUX_DATA(VIO0_D3_MARK,		PORT31_FN1),
+	PINMUX_DATA(VIO0_D2_MARK,		PORT32_FN1),
+	PINMUX_DATA(VIO0_D1_MARK,		PORT33_FN1),
+	PINMUX_DATA(VIO0_D0_MARK,		PORT34_FN1),
+	PINMUX_DATA(VIO0_CLK_MARK,		PORT35_FN1),
+	PINMUX_DATA(VIO_CKO_MARK,		PORT36_FN1),
+	PINMUX_DATA(VIO0_HD_MARK,		PORT37_FN1),
+	PINMUX_DATA(VIO0_FIELD_MARK,		PORT38_FN1),
+	PINMUX_DATA(VIO0_VD_MARK,		PORT39_FN1),
+
+	/* Port38 IRQ */
+	PINMUX_DATA(IRQ25_MARK,			PORT38_FN0),
+
+	/* Port40 */
+	PINMUX_DATA(LCD0_D18_PORT40_MARK,	PORT40_FN4,	MSEL5CR_6_0),
+	PINMUX_DATA(RSPI_CK_A_MARK,		PORT40_FN6),
+	PINMUX_DATA(LCD1_LCLK_MARK,		PORT40_FN7),
+
+	/* Port41 */
+	PINMUX_DATA(LCD0_D17_MARK,		PORT41_FN1),
+	PINMUX_DATA(MSIOF2_SS1_MARK,		PORT41_FN2),
+	PINMUX_DATA(IRQ31_PORT41_MARK,		PORT41_FN0,	MSEL1CR_31_1),
+
+	/* Port42 */
+	PINMUX_DATA(LCD0_D16_MARK,		PORT42_FN1),
+	PINMUX_DATA(MSIOF2_MCK1_MARK,		PORT42_FN2),
+	PINMUX_DATA(IRQ12_PORT42_MARK,		PORT42_FN0,	MSEL1CR_12_1),
+
+	/* Port43 */
+	PINMUX_DATA(LCD0_D15_MARK,		PORT43_FN1),
+	PINMUX_DATA(MSIOF2_MCK0_MARK,		PORT43_FN2),
+	PINMUX_DATA(KEYIN0_PORT43_MARK,		PORT43_FN3,	MSEL4CR_18_0),
+	PINMUX_DATA(DV_D15_MARK,		PORT43_FN6),
+
+	/* Port44 */
+	PINMUX_DATA(LCD0_D14_MARK,		PORT44_FN1),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK,		PORT44_FN2),
+	PINMUX_DATA(KEYIN1_PORT44_MARK,		PORT44_FN3,	MSEL4CR_18_0),
+	PINMUX_DATA(DV_D14_MARK,		PORT44_FN6),
+
+	/* Port45 */
+	PINMUX_DATA(LCD0_D13_MARK,		PORT45_FN1),
+	PINMUX_DATA(MSIOF2_RSCK_MARK,		PORT45_FN2),
+	PINMUX_DATA(KEYIN2_PORT45_MARK,		PORT45_FN3,	MSEL4CR_18_0),
+	PINMUX_DATA(DV_D13_MARK,		PORT45_FN6),
+
+	/* Port46 */
+	PINMUX_DATA(LCD0_D12_MARK,		PORT46_FN1),
+	PINMUX_DATA(KEYIN3_PORT46_MARK,		PORT46_FN3,	MSEL4CR_18_0),
+	PINMUX_DATA(DV_D12_MARK,		PORT46_FN6),
+
+	/* Port47 */
+	PINMUX_DATA(LCD0_D11_MARK,		PORT47_FN1),
+	PINMUX_DATA(KEYIN4_MARK,		PORT47_FN3),
+	PINMUX_DATA(DV_D11_MARK,		PORT47_FN6),
+
+	/* Port48 */
+	PINMUX_DATA(LCD0_D10_MARK,		PORT48_FN1),
+	PINMUX_DATA(KEYIN5_MARK,		PORT48_FN3),
+	PINMUX_DATA(DV_D10_MARK,		PORT48_FN6),
+
+	/* Port49 */
+	PINMUX_DATA(LCD0_D9_MARK,		PORT49_FN1),
+	PINMUX_DATA(KEYIN6_MARK,		PORT49_FN3),
+	PINMUX_DATA(DV_D9_MARK,			PORT49_FN6),
+	PINMUX_DATA(IRQ30_PORT49_MARK,		PORT49_FN0,	MSEL1CR_30_1),
+
+	/* Port50 */
+	PINMUX_DATA(LCD0_D8_MARK,		PORT50_FN1),
+	PINMUX_DATA(KEYIN7_MARK,		PORT50_FN3),
+	PINMUX_DATA(DV_D8_MARK,			PORT50_FN6),
+	PINMUX_DATA(IRQ29_PORT50_MARK,		PORT50_FN0,	MSEL1CR_29_1),
+
+	/* Port51 */
+	PINMUX_DATA(LCD0_D7_MARK,		PORT51_FN1),
+	PINMUX_DATA(KEYOUT0_MARK,		PORT51_FN3),
+	PINMUX_DATA(DV_D7_MARK,			PORT51_FN6),
+
+	/* Port52 */
+	PINMUX_DATA(LCD0_D6_MARK,		PORT52_FN1),
+	PINMUX_DATA(KEYOUT1_MARK,		PORT52_FN3),
+	PINMUX_DATA(DV_D6_MARK,			PORT52_FN6),
+
+	/* Port53 */
+	PINMUX_DATA(LCD0_D5_MARK,		PORT53_FN1),
+	PINMUX_DATA(KEYOUT2_MARK,		PORT53_FN3),
+	PINMUX_DATA(DV_D5_MARK,			PORT53_FN6),
+
+	/* Port54 */
+	PINMUX_DATA(LCD0_D4_MARK,		PORT54_FN1),
+	PINMUX_DATA(KEYOUT3_MARK,		PORT54_FN3),
+	PINMUX_DATA(DV_D4_MARK,			PORT54_FN6),
+
+	/* Port55 */
+	PINMUX_DATA(LCD0_D3_MARK,		PORT55_FN1),
+	PINMUX_DATA(KEYOUT4_MARK,		PORT55_FN3),
+	PINMUX_DATA(KEYIN3_PORT55_MARK,		PORT55_FN4,	MSEL4CR_18_1),
+	PINMUX_DATA(DV_D3_MARK,			PORT55_FN6),
+
+	/* Port56 */
+	PINMUX_DATA(LCD0_D2_MARK,		PORT56_FN1),
+	PINMUX_DATA(KEYOUT5_MARK,		PORT56_FN3),
+	PINMUX_DATA(KEYIN2_PORT56_MARK,		PORT56_FN4,	MSEL4CR_18_1),
+	PINMUX_DATA(DV_D2_MARK,			PORT56_FN6),
+	PINMUX_DATA(IRQ28_PORT56_MARK,		PORT56_FN0,	MSEL1CR_28_1),
+
+	/* Port57 */
+	PINMUX_DATA(LCD0_D1_MARK,		PORT57_FN1),
+	PINMUX_DATA(KEYOUT6_MARK,		PORT57_FN3),
+	PINMUX_DATA(KEYIN1_PORT57_MARK,		PORT57_FN4,	MSEL4CR_18_1),
+	PINMUX_DATA(DV_D1_MARK,			PORT57_FN6),
+	PINMUX_DATA(IRQ27_PORT57_MARK,		PORT57_FN0,	MSEL1CR_27_1),
+
+	/* Port58 */
+	PINMUX_DATA(LCD0_D0_MARK,		PORT58_FN1),
+	PINMUX_DATA(KEYOUT7_MARK,		PORT58_FN3),
+	PINMUX_DATA(KEYIN0_PORT58_MARK,		PORT58_FN4,	MSEL4CR_18_1),
+	PINMUX_DATA(DV_D0_MARK,			PORT58_FN6),
+	PINMUX_DATA(IRQ26_PORT58_MARK,		PORT58_FN0,	MSEL1CR_26_1),
+
+	/* Port59 */
+	PINMUX_DATA(LCD0_VCPWC_MARK,		PORT59_FN1),
+	PINMUX_DATA(BBIF2_TSCK2_PORT59_MARK,	PORT59_FN2,	MSEL5CR_0_0),
+	PINMUX_DATA(RSPI_MOSI_A_MARK,		PORT59_FN6),
+
+	/* Port60 */
+	PINMUX_DATA(LCD0_VEPWC_MARK,		PORT60_FN1),
+	PINMUX_DATA(BBIF2_RXD2_PORT60_MARK,	PORT60_FN2,	MSEL5CR_0_0),
+	PINMUX_DATA(RSPI_MISO_A_MARK,		PORT60_FN6),
+
+	/* Port61 */
+	PINMUX_DATA(LCD0_DON_MARK,		PORT61_FN1),
+	PINMUX_DATA(MSIOF2_TXD_MARK,		PORT61_FN2),
+
+	/* Port62 */
+	PINMUX_DATA(LCD0_DCK_MARK,		PORT62_FN1),
+	PINMUX_DATA(LCD0_WR_MARK,		PORT62_FN4),
+	PINMUX_DATA(DV_CLK_MARK,		PORT62_FN6),
+	PINMUX_DATA(IRQ15_PORT62_MARK,		PORT62_FN0,	MSEL1CR_15_1),
+
+	/* Port63 */
+	PINMUX_DATA(LCD0_VSYN_MARK,		PORT63_FN1),
+	PINMUX_DATA(DV_VSYNC_MARK,		PORT63_FN6),
+	PINMUX_DATA(IRQ14_PORT63_MARK,		PORT63_FN0,	MSEL1CR_14_1),
+
+	/* Port64 */
+	PINMUX_DATA(LCD0_HSYN_MARK,		PORT64_FN1),
+	PINMUX_DATA(LCD0_CS_MARK,		PORT64_FN4),
+	PINMUX_DATA(DV_HSYNC_MARK,		PORT64_FN6),
+	PINMUX_DATA(IRQ13_PORT64_MARK,		PORT64_FN0,	MSEL1CR_13_1),
+
+	/* Port65 */
+	PINMUX_DATA(LCD0_DISP_MARK,		PORT65_FN1),
+	PINMUX_DATA(MSIOF2_TSCK_MARK,		PORT65_FN2),
+	PINMUX_DATA(LCD0_RS_MARK,		PORT65_FN4),
+
+	/* Port66 */
+	PINMUX_DATA(MEMC_INT_MARK,		PORT66_FN1),
+	PINMUX_DATA(TPU0TO2_PORT66_MARK,	PORT66_FN3,	MSEL5CR_25_0),
+	PINMUX_DATA(MMC0_CLK_PORT66_MARK,	PORT66_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(SDHI1_CLK_MARK,		PORT66_FN6),
+
+	/* Port67 - Port73 Function1 */
+	PINMUX_DATA(MEMC_CS0_MARK,		PORT67_FN1),
+	PINMUX_DATA(MEMC_AD8_MARK,		PORT68_FN1),
+	PINMUX_DATA(MEMC_AD9_MARK,		PORT69_FN1),
+	PINMUX_DATA(MEMC_AD10_MARK,		PORT70_FN1),
+	PINMUX_DATA(MEMC_AD11_MARK,		PORT71_FN1),
+	PINMUX_DATA(MEMC_AD12_MARK,		PORT72_FN1),
+	PINMUX_DATA(MEMC_AD13_MARK,		PORT73_FN1),
+
+	/* Port67 - Port73 Function2 */
+	PINMUX_DATA(MSIOF1_SS1_PORT67_MARK,	PORT67_FN2,	MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_RSCK_MARK,		PORT68_FN2),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK,		PORT69_FN2),
+	PINMUX_DATA(MSIOF1_MCK0_MARK,		PORT70_FN2),
+	PINMUX_DATA(MSIOF1_MCK1_MARK,		PORT71_FN2),
+	PINMUX_DATA(MSIOF1_TSCK_PORT72_MARK,	PORT72_FN2,	MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_TSYNC_PORT73_MARK,	PORT73_FN2,	MSEL4CR_10_1),
+
+	/* Port67 - Port73 Function4 */
+	PINMUX_DATA(MMC0_CMD_PORT67_MARK,	PORT67_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(MMC0_D0_PORT68_MARK,	PORT68_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(MMC0_D1_PORT69_MARK,	PORT69_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(MMC0_D2_PORT70_MARK,	PORT70_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(MMC0_D3_PORT71_MARK,	PORT71_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(MMC0_D4_PORT72_MARK,	PORT72_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(MMC0_D5_PORT73_MARK,	PORT73_FN4,	MSEL4CR_15_0),
+
+	/* Port67 - Port73 Function6 */
+	PINMUX_DATA(SDHI1_CMD_MARK,		PORT67_FN6),
+	PINMUX_DATA(SDHI1_D0_MARK,		PORT68_FN6),
+	PINMUX_DATA(SDHI1_D1_MARK,		PORT69_FN6),
+	PINMUX_DATA(SDHI1_D2_MARK,		PORT70_FN6),
+	PINMUX_DATA(SDHI1_D3_MARK,		PORT71_FN6),
+	PINMUX_DATA(SDHI1_CD_MARK,		PORT72_FN6),
+	PINMUX_DATA(SDHI1_WP_MARK,		PORT73_FN6),
+
+	/* Port67 - Port71 IRQ */
+	PINMUX_DATA(IRQ20_MARK,			PORT67_FN0),
+	PINMUX_DATA(IRQ16_PORT68_MARK,		PORT68_FN0,	MSEL1CR_16_0),
+	PINMUX_DATA(IRQ17_MARK,			PORT69_FN0),
+	PINMUX_DATA(IRQ18_MARK,			PORT70_FN0),
+	PINMUX_DATA(IRQ19_MARK,			PORT71_FN0),
+
+	/* Port74 */
+	PINMUX_DATA(MEMC_AD14_MARK,		PORT74_FN1),
+	PINMUX_DATA(MSIOF1_TXD_PORT74_MARK,	PORT74_FN2,	MSEL4CR_10_1),
+	PINMUX_DATA(MMC0_D6_PORT74_MARK,	PORT74_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(STP1_IPD7_MARK,		PORT74_FN6),
+	PINMUX_DATA(LCD1_D21_MARK,		PORT74_FN7),
+
+	/* Port75 */
+	PINMUX_DATA(MEMC_AD15_MARK,		PORT75_FN1),
+	PINMUX_DATA(MSIOF1_RXD_PORT75_MARK,	PORT75_FN2,	MSEL4CR_10_1),
+	PINMUX_DATA(MMC0_D7_PORT75_MARK,	PORT75_FN4,	MSEL4CR_15_0),
+	PINMUX_DATA(STP1_IPD6_MARK,		PORT75_FN6),
+	PINMUX_DATA(LCD1_D20_MARK,		PORT75_FN7),
+
+	/* Port76 - Port80 Function */
+	PINMUX_DATA(SDHI0_CMD_MARK,		PORT76_FN1),
+	PINMUX_DATA(SDHI0_D0_MARK,		PORT77_FN1),
+	PINMUX_DATA(SDHI0_D1_MARK,		PORT78_FN1),
+	PINMUX_DATA(SDHI0_D2_MARK,		PORT79_FN1),
+	PINMUX_DATA(SDHI0_D3_MARK,		PORT80_FN1),
+
+	/* Port81 */
+	PINMUX_DATA(SDHI0_CD_MARK,		PORT81_FN1),
+	PINMUX_DATA(IRQ26_PORT81_MARK,		PORT81_FN0,	MSEL1CR_26_0),
+
+	/* Port82 - Port88 Function */
+	PINMUX_DATA(SDHI0_CLK_MARK,		PORT82_FN1),
+	PINMUX_DATA(SDHI0_WP_MARK,		PORT83_FN1),
+	PINMUX_DATA(RESETOUTS_MARK,		PORT84_FN1),
+	PINMUX_DATA(USB0_PPON_MARK,		PORT85_FN1),
+	PINMUX_DATA(USB0_OCI_MARK,		PORT86_FN1),
+	PINMUX_DATA(USB1_PPON_MARK,		PORT87_FN1),
+	PINMUX_DATA(USB1_OCI_MARK,		PORT88_FN1),
+
+	/* Port89 */
+	PINMUX_DATA(DREQ0_MARK,			PORT89_FN1),
+	PINMUX_DATA(BBIF2_TSCK2_PORT89_MARK,	PORT89_FN2,	MSEL5CR_0_1),
+	PINMUX_DATA(RSPI_SSL3_A_MARK,		PORT89_FN6),
+
+	/* Port90 */
+	PINMUX_DATA(DACK0_MARK,			PORT90_FN1),
+	PINMUX_DATA(BBIF2_RXD2_PORT90_MARK,	PORT90_FN2,	MSEL5CR_0_1),
+	PINMUX_DATA(RSPI_SSL2_A_MARK,		PORT90_FN6),
+	PINMUX_DATA(WAIT_PORT90_MARK,		PORT90_FN7,	MSEL5CR_2_1),
+
+	/* Port91 */
+	PINMUX_DATA(MEMC_AD0_MARK,		PORT91_FN1),
+	PINMUX_DATA(BBIF1_RXD_MARK,		PORT91_FN2),
+	PINMUX_DATA(SCIFA5_TXD_PORT91_MARK,	PORT91_FN3,	MSEL5CR_15_1,
+			MSEL5CR_14_0),
+	PINMUX_DATA(LCD1_D5_MARK,		PORT91_FN7),
+
+	/* Port92 */
+	PINMUX_DATA(MEMC_AD1_MARK,		PORT92_FN1),
+	PINMUX_DATA(BBIF1_TSYNC_MARK,		PORT92_FN2),
+	PINMUX_DATA(SCIFA5_RXD_PORT92_MARK,	PORT92_FN3,	MSEL5CR_15_1,
+			MSEL5CR_14_0),
+	PINMUX_DATA(STP0_IPD1_MARK,		PORT92_FN6),
+	PINMUX_DATA(LCD1_D6_MARK,		PORT92_FN7),
+
+	/* Port93 */
+	PINMUX_DATA(MEMC_AD2_MARK,		PORT93_FN1),
+	PINMUX_DATA(BBIF1_TSCK_MARK,		PORT93_FN2),
+	PINMUX_DATA(SCIFA4_TXD_PORT93_MARK,	PORT93_FN3,	MSEL5CR_12_1,
+			MSEL5CR_11_0),
+	PINMUX_DATA(STP0_IPD3_MARK,		PORT93_FN6),
+	PINMUX_DATA(LCD1_D8_MARK,		PORT93_FN7),
+
+	/* Port94 */
+	PINMUX_DATA(MEMC_AD3_MARK,		PORT94_FN1),
+	PINMUX_DATA(BBIF1_TXD_MARK,		PORT94_FN2),
+	PINMUX_DATA(SCIFA4_RXD_PORT94_MARK,	PORT94_FN3,	MSEL5CR_12_1,
+			MSEL5CR_11_0),
+	PINMUX_DATA(STP0_IPD4_MARK,		PORT94_FN6),
+	PINMUX_DATA(LCD1_D9_MARK,		PORT94_FN7),
+
+	/* Port95 */
+	PINMUX_DATA(MEMC_CS1_MARK,		PORT95_FN1,	MSEL4CR_6_0),
+	PINMUX_DATA(MEMC_A1_MARK,		PORT95_FN1,	MSEL4CR_6_1),
+
+	PINMUX_DATA(SCIFA2_CTS_MARK,		PORT95_FN2),
+	PINMUX_DATA(SIM_RST_MARK,		PORT95_FN4),
+	PINMUX_DATA(VIO0_D14_PORT95_MARK,	PORT95_FN7,	MSEL5CR_27_1),
+	PINMUX_DATA(IRQ22_MARK,			PORT95_FN0),
+
+	/* Port96 */
+	PINMUX_DATA(MEMC_ADV_MARK,		PORT96_FN1,	MSEL4CR_6_0),
+	PINMUX_DATA(MEMC_DREQ0_MARK,		PORT96_FN1,	MSEL4CR_6_1),
+
+	PINMUX_DATA(SCIFA2_RTS_MARK,		PORT96_FN2),
+	PINMUX_DATA(SIM_CLK_MARK,		PORT96_FN4),
+	PINMUX_DATA(VIO0_D15_PORT96_MARK,	PORT96_FN7,	MSEL5CR_27_1),
+	PINMUX_DATA(IRQ23_MARK,			PORT96_FN0),
+
+	/* Port97 */
+	PINMUX_DATA(MEMC_AD4_MARK,		PORT97_FN1),
+	PINMUX_DATA(BBIF1_RSCK_MARK,		PORT97_FN2),
+	PINMUX_DATA(LCD1_CS_MARK,		PORT97_FN6),
+	PINMUX_DATA(LCD1_HSYN_MARK,		PORT97_FN7),
+	PINMUX_DATA(IRQ12_PORT97_MARK,		PORT97_FN0,	MSEL1CR_12_0),
+
+	/* Port98 */
+	PINMUX_DATA(MEMC_AD5_MARK,		PORT98_FN1),
+	PINMUX_DATA(BBIF1_RSYNC_MARK,		PORT98_FN2),
+	PINMUX_DATA(LCD1_VSYN_MARK,		PORT98_FN7),
+	PINMUX_DATA(IRQ13_PORT98_MARK,		PORT98_FN0,	MSEL1CR_13_0),
+
+	/* Port99 */
+	PINMUX_DATA(MEMC_AD6_MARK,		PORT99_FN1),
+	PINMUX_DATA(BBIF1_FLOW_MARK,		PORT99_FN2),
+	PINMUX_DATA(LCD1_WR_MARK,		PORT99_FN6),
+	PINMUX_DATA(LCD1_DCK_MARK,		PORT99_FN7),
+	PINMUX_DATA(IRQ14_PORT99_MARK,		PORT99_FN0,	MSEL1CR_14_0),
+
+	/* Port100 */
+	PINMUX_DATA(MEMC_AD7_MARK,		PORT100_FN1),
+	PINMUX_DATA(BBIF1_RX_FLOW_N_MARK,	PORT100_FN2),
+	PINMUX_DATA(LCD1_DON_MARK,		PORT100_FN7),
+	PINMUX_DATA(IRQ15_PORT100_MARK,		PORT100_FN0,	MSEL1CR_15_0),
+
+	/* Port101 */
+	PINMUX_DATA(FCE0_MARK,			PORT101_FN1),
+
+	/* Port102 */
+	PINMUX_DATA(FRB_MARK,			PORT102_FN1),
+	PINMUX_DATA(LCD0_LCLK_PORT102_MARK,	PORT102_FN4,	MSEL5CR_6_0),
+
+	/* Port103 */
+	PINMUX_DATA(CS5B_MARK,			PORT103_FN1),
+	PINMUX_DATA(FCE1_MARK,			PORT103_FN2),
+	PINMUX_DATA(MMC1_CLK_PORT103_MARK,	PORT103_FN3,	MSEL4CR_15_1),
+
+	/* Port104 */
+	PINMUX_DATA(CS6A_MARK,			PORT104_FN1),
+	PINMUX_DATA(MMC1_CMD_PORT104_MARK,	PORT104_FN3,	MSEL4CR_15_1),
+	PINMUX_DATA(IRQ11_MARK,			PORT104_FN0),
+
+	/* Port105 */
+	PINMUX_DATA(CS5A_PORT105_MARK,		PORT105_FN1,	MSEL5CR_2_0),
+	PINMUX_DATA(SCIFA3_RTS_PORT105_MARK,	PORT105_FN4,	MSEL5CR_8_0),
+
+	/* Port106 */
+	PINMUX_DATA(IOIS16_MARK,		PORT106_FN1),
+	PINMUX_DATA(IDE_EXBUF_ENB_MARK,		PORT106_FN6),
+
+	/* Port107 - Port115 Function */
+	PINMUX_DATA(WE3_ICIOWR_MARK,		PORT107_FN1),
+	PINMUX_DATA(WE2_ICIORD_MARK,		PORT108_FN1),
+	PINMUX_DATA(CS0_MARK,			PORT109_FN1),
+	PINMUX_DATA(CS2_MARK,			PORT110_FN1),
+	PINMUX_DATA(CS4_MARK,			PORT111_FN1),
+	PINMUX_DATA(WE1_MARK,			PORT112_FN1),
+	PINMUX_DATA(WE0_FWE_MARK,		PORT113_FN1),
+	PINMUX_DATA(RDWR_MARK,			PORT114_FN1),
+	PINMUX_DATA(RD_FSC_MARK,		PORT115_FN1),
+
+	/* Port116 */
+	PINMUX_DATA(A25_MARK,			PORT116_FN1),
+	PINMUX_DATA(MSIOF0_SS2_MARK,		PORT116_FN2),
+	PINMUX_DATA(MSIOF1_SS2_PORT116_MARK,	PORT116_FN3,	MSEL4CR_10_0),
+	PINMUX_DATA(SCIFA3_SCK_PORT116_MARK,	PORT116_FN4,	MSEL5CR_8_0),
+	PINMUX_DATA(GPO1_MARK,			PORT116_FN5),
+
+	/* Port117 */
+	PINMUX_DATA(A24_MARK,			PORT117_FN1),
+	PINMUX_DATA(MSIOF0_SS1_MARK,		PORT117_FN2),
+	PINMUX_DATA(MSIOF1_SS1_PORT117_MARK,	PORT117_FN3,	MSEL4CR_10_0),
+	PINMUX_DATA(SCIFA3_CTS_PORT117_MARK,	PORT117_FN4,	MSEL5CR_8_0),
+	PINMUX_DATA(GPO0_MARK,			PORT117_FN5),
+
+	/* Port118 */
+	PINMUX_DATA(A23_MARK,			PORT118_FN1),
+	PINMUX_DATA(MSIOF0_MCK1_MARK,		PORT118_FN2),
+	PINMUX_DATA(MSIOF1_RXD_PORT118_MARK,	PORT118_FN3,	MSEL4CR_10_0),
+	PINMUX_DATA(GPI1_MARK,			PORT118_FN5),
+	PINMUX_DATA(IRQ9_PORT118_MARK,		PORT118_FN0,	MSEL1CR_9_0),
+
+	/* Port119 */
+	PINMUX_DATA(A22_MARK,			PORT119_FN1),
+	PINMUX_DATA(MSIOF0_MCK0_MARK,		PORT119_FN2),
+	PINMUX_DATA(MSIOF1_TXD_PORT119_MARK,	PORT119_FN3,	MSEL4CR_10_0),
+	PINMUX_DATA(GPI0_MARK,			PORT119_FN5),
+	PINMUX_DATA(IRQ8_MARK,			PORT119_FN0),
+
+	/* Port120 */
+	PINMUX_DATA(A21_MARK,			PORT120_FN1),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK,		PORT120_FN2),
+	PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK,	PORT120_FN3,	MSEL4CR_10_0),
+	PINMUX_DATA(IRQ7_PORT120_MARK,		PORT120_FN0,	MSEL1CR_7_0),
+
+	/* Port121 */
+	PINMUX_DATA(A20_MARK,			PORT121_FN1),
+	PINMUX_DATA(MSIOF0_RSCK_MARK,		PORT121_FN2),
+	PINMUX_DATA(MSIOF1_TSCK_PORT121_MARK,	PORT121_FN3,	MSEL4CR_10_0),
+	PINMUX_DATA(IRQ6_PORT121_MARK,		PORT121_FN0,	MSEL1CR_6_0),
+
+	/* Port122 */
+	PINMUX_DATA(A19_MARK,			PORT122_FN1),
+	PINMUX_DATA(MSIOF0_RXD_MARK,		PORT122_FN2),
+
+	/* Port123 */
+	PINMUX_DATA(A18_MARK,			PORT123_FN1),
+	PINMUX_DATA(MSIOF0_TSCK_MARK,		PORT123_FN2),
+
+	/* Port124 */
+	PINMUX_DATA(A17_MARK,			PORT124_FN1),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK,		PORT124_FN2),
+
+	/* Port125 - Port141 Function */
+	PINMUX_DATA(A16_MARK,			PORT125_FN1),
+	PINMUX_DATA(A15_MARK,			PORT126_FN1),
+	PINMUX_DATA(A14_MARK,			PORT127_FN1),
+	PINMUX_DATA(A13_MARK,			PORT128_FN1),
+	PINMUX_DATA(A12_MARK,			PORT129_FN1),
+	PINMUX_DATA(A11_MARK,			PORT130_FN1),
+	PINMUX_DATA(A10_MARK,			PORT131_FN1),
+	PINMUX_DATA(A9_MARK,			PORT132_FN1),
+	PINMUX_DATA(A8_MARK,			PORT133_FN1),
+	PINMUX_DATA(A7_MARK,			PORT134_FN1),
+	PINMUX_DATA(A6_MARK,			PORT135_FN1),
+	PINMUX_DATA(A5_FCDE_MARK,		PORT136_FN1),
+	PINMUX_DATA(A4_FOE_MARK,		PORT137_FN1),
+	PINMUX_DATA(A3_MARK,			PORT138_FN1),
+	PINMUX_DATA(A2_MARK,			PORT139_FN1),
+	PINMUX_DATA(A1_MARK,			PORT140_FN1),
+	PINMUX_DATA(CKO_MARK,			PORT141_FN1),
+
+	/* Port142 - Port157 Function1 */
+	PINMUX_DATA(D15_NAF15_MARK,		PORT142_FN1),
+	PINMUX_DATA(D14_NAF14_MARK,		PORT143_FN1),
+	PINMUX_DATA(D13_NAF13_MARK,		PORT144_FN1),
+	PINMUX_DATA(D12_NAF12_MARK,		PORT145_FN1),
+	PINMUX_DATA(D11_NAF11_MARK,		PORT146_FN1),
+	PINMUX_DATA(D10_NAF10_MARK,		PORT147_FN1),
+	PINMUX_DATA(D9_NAF9_MARK,		PORT148_FN1),
+	PINMUX_DATA(D8_NAF8_MARK,		PORT149_FN1),
+	PINMUX_DATA(D7_NAF7_MARK,		PORT150_FN1),
+	PINMUX_DATA(D6_NAF6_MARK,		PORT151_FN1),
+	PINMUX_DATA(D5_NAF5_MARK,		PORT152_FN1),
+	PINMUX_DATA(D4_NAF4_MARK,		PORT153_FN1),
+	PINMUX_DATA(D3_NAF3_MARK,		PORT154_FN1),
+	PINMUX_DATA(D2_NAF2_MARK,		PORT155_FN1),
+	PINMUX_DATA(D1_NAF1_MARK,		PORT156_FN1),
+	PINMUX_DATA(D0_NAF0_MARK,		PORT157_FN1),
+
+	/* Port142 - Port149 Function3 */
+	PINMUX_DATA(MMC1_D7_PORT142_MARK,	PORT142_FN3,	MSEL4CR_15_1),
+	PINMUX_DATA(MMC1_D6_PORT143_MARK,	PORT143_FN3,	MSEL4CR_15_1),
+	PINMUX_DATA(MMC1_D5_PORT144_MARK,	PORT144_FN3,	MSEL4CR_15_1),
+	PINMUX_DATA(MMC1_D4_PORT145_MARK,	PORT145_FN3,	MSEL4CR_15_1),
+	PINMUX_DATA(MMC1_D3_PORT146_MARK,	PORT146_FN3,	MSEL4CR_15_1),
+	PINMUX_DATA(MMC1_D2_PORT147_MARK,	PORT147_FN3,	MSEL4CR_15_1),
+	PINMUX_DATA(MMC1_D1_PORT148_MARK,	PORT148_FN3,	MSEL4CR_15_1),
+	PINMUX_DATA(MMC1_D0_PORT149_MARK,	PORT149_FN3,	MSEL4CR_15_1),
+
+	/* Port158 */
+	PINMUX_DATA(D31_MARK,			PORT158_FN1),
+	PINMUX_DATA(SCIFA3_SCK_PORT158_MARK,	PORT158_FN2,	MSEL5CR_8_1),
+	PINMUX_DATA(RMII_REF125CK_MARK,		PORT158_FN3),
+	PINMUX_DATA(LCD0_D21_PORT158_MARK,	PORT158_FN4,	MSEL5CR_6_1),
+	PINMUX_DATA(IRDA_FIRSEL_MARK,		PORT158_FN5),
+	PINMUX_DATA(IDE_D15_MARK,		PORT158_FN6),
+
+	/* Port159 */
+	PINMUX_DATA(D30_MARK,			PORT159_FN1),
+	PINMUX_DATA(SCIFA3_RXD_PORT159_MARK,	PORT159_FN2,	MSEL5CR_8_1),
+	PINMUX_DATA(RMII_REF50CK_MARK,		PORT159_FN3),
+	PINMUX_DATA(LCD0_D23_PORT159_MARK,	PORT159_FN4,	MSEL5CR_6_1),
+	PINMUX_DATA(IDE_D14_MARK,		PORT159_FN6),
+
+	/* Port160 */
+	PINMUX_DATA(D29_MARK,			PORT160_FN1),
+	PINMUX_DATA(SCIFA3_TXD_PORT160_MARK,	PORT160_FN2,	MSEL5CR_8_1),
+	PINMUX_DATA(LCD0_D22_PORT160_MARK,	PORT160_FN4,	MSEL5CR_6_1),
+	PINMUX_DATA(VIO1_HD_MARK,		PORT160_FN5),
+	PINMUX_DATA(IDE_D13_MARK,		PORT160_FN6),
+
+	/* Port161 */
+	PINMUX_DATA(D28_MARK,			PORT161_FN1),
+	PINMUX_DATA(SCIFA3_RTS_PORT161_MARK,	PORT161_FN2,	MSEL5CR_8_1),
+	PINMUX_DATA(ET_RX_DV_MARK,		PORT161_FN3),
+	PINMUX_DATA(LCD0_D20_PORT161_MARK,	PORT161_FN4,	MSEL5CR_6_1),
+	PINMUX_DATA(IRDA_IN_MARK,		PORT161_FN5),
+	PINMUX_DATA(IDE_D12_MARK,		PORT161_FN6),
+
+	/* Port162 */
+	PINMUX_DATA(D27_MARK,			PORT162_FN1),
+	PINMUX_DATA(SCIFA3_CTS_PORT162_MARK,	PORT162_FN2,	MSEL5CR_8_1),
+	PINMUX_DATA(LCD0_D19_PORT162_MARK,	PORT162_FN4,	MSEL5CR_6_1),
+	PINMUX_DATA(IRDA_OUT_MARK,		PORT162_FN5),
+	PINMUX_DATA(IDE_D11_MARK,		PORT162_FN6),
+
+	/* Port163 */
+	PINMUX_DATA(D26_MARK,			PORT163_FN1),
+	PINMUX_DATA(MSIOF2_SS2_MARK,		PORT163_FN2),
+	PINMUX_DATA(ET_COL_MARK,		PORT163_FN3),
+	PINMUX_DATA(LCD0_D18_PORT163_MARK,	PORT163_FN4,	MSEL5CR_6_1),
+	PINMUX_DATA(IROUT_MARK,			PORT163_FN5),
+	PINMUX_DATA(IDE_D10_MARK,		PORT163_FN6),
+
+	/* Port164 */
+	PINMUX_DATA(D25_MARK,			PORT164_FN1),
+	PINMUX_DATA(MSIOF2_TSYNC_MARK,		PORT164_FN2),
+	PINMUX_DATA(ET_PHY_INT_MARK,		PORT164_FN3),
+	PINMUX_DATA(LCD0_RD_MARK,		PORT164_FN4),
+	PINMUX_DATA(IDE_D9_MARK,		PORT164_FN6),
+
+	/* Port165 */
+	PINMUX_DATA(D24_MARK,			PORT165_FN1),
+	PINMUX_DATA(MSIOF2_RXD_MARK,		PORT165_FN2),
+	PINMUX_DATA(LCD0_LCLK_PORT165_MARK,	PORT165_FN4,	MSEL5CR_6_1),
+	PINMUX_DATA(IDE_D8_MARK,		PORT165_FN6),
+
+	/* Port166 - Port171 Function1 */
+	PINMUX_DATA(D21_MARK,			PORT166_FN1),
+	PINMUX_DATA(D20_MARK,			PORT167_FN1),
+	PINMUX_DATA(D19_MARK,			PORT168_FN1),
+	PINMUX_DATA(D18_MARK,			PORT169_FN1),
+	PINMUX_DATA(D17_MARK,			PORT170_FN1),
+	PINMUX_DATA(D16_MARK,			PORT171_FN1),
+
+	/* Port166 - Port171 Function3 */
+	PINMUX_DATA(ET_ETXD5_MARK,		PORT166_FN3),
+	PINMUX_DATA(ET_ETXD4_MARK,		PORT167_FN3),
+	PINMUX_DATA(ET_ETXD3_MARK,		PORT168_FN3),
+	PINMUX_DATA(ET_ETXD2_MARK,		PORT169_FN3),
+	PINMUX_DATA(ET_ETXD1_MARK,		PORT170_FN3),
+	PINMUX_DATA(ET_ETXD0_MARK,		PORT171_FN3),
+
+	/* Port166 - Port171 Function6 */
+	PINMUX_DATA(IDE_D5_MARK,		PORT166_FN6),
+	PINMUX_DATA(IDE_D4_MARK,		PORT167_FN6),
+	PINMUX_DATA(IDE_D3_MARK,		PORT168_FN6),
+	PINMUX_DATA(IDE_D2_MARK,		PORT169_FN6),
+	PINMUX_DATA(IDE_D1_MARK,		PORT170_FN6),
+	PINMUX_DATA(IDE_D0_MARK,		PORT171_FN6),
+
+	/* Port167 - Port171 IRQ */
+	PINMUX_DATA(IRQ31_PORT167_MARK,		PORT167_FN0,	MSEL1CR_31_0),
+	PINMUX_DATA(IRQ27_PORT168_MARK,		PORT168_FN0,	MSEL1CR_27_0),
+	PINMUX_DATA(IRQ28_PORT169_MARK,		PORT169_FN0,	MSEL1CR_28_0),
+	PINMUX_DATA(IRQ29_PORT170_MARK,		PORT170_FN0,	MSEL1CR_29_0),
+	PINMUX_DATA(IRQ30_PORT171_MARK,		PORT171_FN0,	MSEL1CR_30_0),
+
+	/* Port172 */
+	PINMUX_DATA(D23_MARK,			PORT172_FN1),
+	PINMUX_DATA(SCIFB_RTS_PORT172_MARK,	PORT172_FN2,	MSEL5CR_17_1),
+	PINMUX_DATA(ET_ETXD7_MARK,		PORT172_FN3),
+	PINMUX_DATA(IDE_D7_MARK,		PORT172_FN6),
+	PINMUX_DATA(IRQ4_PORT172_MARK,		PORT172_FN0,	MSEL1CR_4_1),
+
+	/* Port173 */
+	PINMUX_DATA(D22_MARK,			PORT173_FN1),
+	PINMUX_DATA(SCIFB_CTS_PORT173_MARK,	PORT173_FN2,	MSEL5CR_17_1),
+	PINMUX_DATA(ET_ETXD6_MARK,		PORT173_FN3),
+	PINMUX_DATA(IDE_D6_MARK,		PORT173_FN6),
+	PINMUX_DATA(IRQ6_PORT173_MARK,		PORT173_FN0,	MSEL1CR_6_1),
+
+	/* Port174 */
+	PINMUX_DATA(A26_MARK,			PORT174_FN1),
+	PINMUX_DATA(MSIOF0_TXD_MARK,		PORT174_FN2),
+	PINMUX_DATA(ET_RX_CLK_MARK,		PORT174_FN3),
+	PINMUX_DATA(SCIFA3_RXD_PORT174_MARK,	PORT174_FN4,	MSEL5CR_8_0),
+
+	/* Port175 */
+	PINMUX_DATA(A0_MARK,			PORT175_FN1),
+	PINMUX_DATA(BS_MARK,			PORT175_FN2),
+	PINMUX_DATA(ET_WOL_MARK,		PORT175_FN3),
+	PINMUX_DATA(SCIFA3_TXD_PORT175_MARK,	PORT175_FN4,	MSEL5CR_8_0),
+
+	/* Port176 */
+	PINMUX_DATA(ET_GTX_CLK_MARK,		PORT176_FN3),
+
+	/* Port177 */
+	PINMUX_DATA(WAIT_PORT177_MARK,		PORT177_FN1,	MSEL5CR_2_0),
+	PINMUX_DATA(ET_LINK_MARK,		PORT177_FN3),
+	PINMUX_DATA(IDE_IOWR_MARK,		PORT177_FN6),
+	PINMUX_DATA(SDHI2_WP_PORT177_MARK,	PORT177_FN7,	MSEL5CR_19_1),
+
+	/* Port178 */
+	PINMUX_DATA(VIO0_D12_MARK,		PORT178_FN1),
+	PINMUX_DATA(VIO1_D4_MARK,		PORT178_FN5),
+	PINMUX_DATA(IDE_IORD_MARK,		PORT178_FN6),
+
+	/* Port179 */
+	PINMUX_DATA(VIO0_D11_MARK,		PORT179_FN1),
+	PINMUX_DATA(VIO1_D3_MARK,		PORT179_FN5),
+	PINMUX_DATA(IDE_IORDY_MARK,		PORT179_FN6),
+
+	/* Port180 */
+	PINMUX_DATA(VIO0_D10_MARK,		PORT180_FN1),
+	PINMUX_DATA(TPU0TO3_MARK,		PORT180_FN4),
+	PINMUX_DATA(VIO1_D2_MARK,		PORT180_FN5),
+	PINMUX_DATA(IDE_INT_MARK,		PORT180_FN6),
+	PINMUX_DATA(IRQ24_MARK,			PORT180_FN0),
+
+	/* Port181 */
+	PINMUX_DATA(VIO0_D9_MARK,		PORT181_FN1),
+	PINMUX_DATA(VIO1_D1_MARK,		PORT181_FN5),
+	PINMUX_DATA(IDE_RST_MARK,		PORT181_FN6),
+
+	/* Port182 */
+	PINMUX_DATA(VIO0_D8_MARK,		PORT182_FN1),
+	PINMUX_DATA(VIO1_D0_MARK,		PORT182_FN5),
+	PINMUX_DATA(IDE_DIRECTION_MARK,		PORT182_FN6),
+
+	/* Port183 */
+	PINMUX_DATA(DREQ1_MARK,			PORT183_FN1),
+	PINMUX_DATA(BBIF2_TXD2_PORT183_MARK,	PORT183_FN2,	MSEL5CR_0_1),
+	PINMUX_DATA(ET_TX_EN_MARK,		PORT183_FN3),
+
+	/* Port184 */
+	PINMUX_DATA(DACK1_MARK,			PORT184_FN1),
+	PINMUX_DATA(BBIF2_TSYNC2_PORT184_MARK,	PORT184_FN2,	MSEL5CR_0_1),
+	PINMUX_DATA(ET_TX_CLK_MARK,		PORT184_FN3),
+
+	/* Port185 - Port192 Function1 */
+	PINMUX_DATA(SCIFA1_SCK_MARK,		PORT185_FN1),
+	PINMUX_DATA(SCIFB_RTS_PORT186_MARK,	PORT186_FN1,	MSEL5CR_17_0),
+	PINMUX_DATA(SCIFB_CTS_PORT187_MARK,	PORT187_FN1,	MSEL5CR_17_0),
+	PINMUX_DATA(SCIFA0_SCK_MARK,		PORT188_FN1),
+	PINMUX_DATA(SCIFB_SCK_PORT190_MARK,	PORT190_FN1,	MSEL5CR_17_0),
+	PINMUX_DATA(SCIFB_RXD_PORT191_MARK,	PORT191_FN1,	MSEL5CR_17_0),
+	PINMUX_DATA(SCIFB_TXD_PORT192_MARK,	PORT192_FN1,	MSEL5CR_17_0),
+
+	/* Port185 - Port192 Function3 */
+	PINMUX_DATA(ET_ERXD0_MARK,		PORT185_FN3),
+	PINMUX_DATA(ET_ERXD1_MARK,		PORT186_FN3),
+	PINMUX_DATA(ET_ERXD2_MARK,		PORT187_FN3),
+	PINMUX_DATA(ET_ERXD3_MARK,		PORT188_FN3),
+	PINMUX_DATA(ET_ERXD4_MARK,		PORT189_FN3),
+	PINMUX_DATA(ET_ERXD5_MARK,		PORT190_FN3),
+	PINMUX_DATA(ET_ERXD6_MARK,		PORT191_FN3),
+	PINMUX_DATA(ET_ERXD7_MARK,		PORT192_FN3),
+
+	/* Port185 - Port192 Function6 */
+	PINMUX_DATA(STP1_IPCLK_MARK,		PORT185_FN6),
+	PINMUX_DATA(STP1_IPD0_PORT186_MARK,	PORT186_FN6,	MSEL5CR_23_0),
+	PINMUX_DATA(STP1_IPEN_PORT187_MARK,	PORT187_FN6,	MSEL5CR_23_0),
+	PINMUX_DATA(STP1_IPSYNC_MARK,		PORT188_FN6),
+	PINMUX_DATA(STP0_IPCLK_MARK,		PORT189_FN6),
+	PINMUX_DATA(STP0_IPD0_MARK,		PORT190_FN6),
+	PINMUX_DATA(STP0_IPEN_MARK,		PORT191_FN6),
+	PINMUX_DATA(STP0_IPSYNC_MARK,		PORT192_FN6),
+
+	/* Port193 */
+	PINMUX_DATA(SCIFA0_CTS_MARK,		PORT193_FN1),
+	PINMUX_DATA(RMII_CRS_DV_MARK,		PORT193_FN3),
+	PINMUX_DATA(STP1_IPEN_PORT193_MARK,	PORT193_FN6,	MSEL5CR_23_1),
+	PINMUX_DATA(LCD1_D17_MARK,		PORT193_FN7),
+
+	/* Port194 */
+	PINMUX_DATA(SCIFA0_RTS_MARK,		PORT194_FN1),
+	PINMUX_DATA(RMII_RX_ER_MARK,		PORT194_FN3),
+	PINMUX_DATA(STP1_IPD0_PORT194_MARK,	PORT194_FN6,	MSEL5CR_23_1),
+	PINMUX_DATA(LCD1_D16_MARK,		PORT194_FN7),
+
+	/* Port195 */
+	PINMUX_DATA(SCIFA1_RXD_MARK,		PORT195_FN1),
+	PINMUX_DATA(RMII_RXD0_MARK,		PORT195_FN3),
+	PINMUX_DATA(STP1_IPD3_MARK,		PORT195_FN6),
+	PINMUX_DATA(LCD1_D15_MARK,		PORT195_FN7),
+
+	/* Port196 */
+	PINMUX_DATA(SCIFA1_TXD_MARK,		PORT196_FN1),
+	PINMUX_DATA(RMII_RXD1_MARK,		PORT196_FN3),
+	PINMUX_DATA(STP1_IPD2_MARK,		PORT196_FN6),
+	PINMUX_DATA(LCD1_D14_MARK,		PORT196_FN7),
+
+	/* Port197 */
+	PINMUX_DATA(SCIFA0_RXD_MARK,		PORT197_FN1),
+	PINMUX_DATA(VIO1_CLK_MARK,		PORT197_FN5),
+	PINMUX_DATA(STP1_IPD5_MARK,		PORT197_FN6),
+	PINMUX_DATA(LCD1_D19_MARK,		PORT197_FN7),
+
+	/* Port198 */
+	PINMUX_DATA(SCIFA0_TXD_MARK,		PORT198_FN1),
+	PINMUX_DATA(VIO1_VD_MARK,		PORT198_FN5),
+	PINMUX_DATA(STP1_IPD4_MARK,		PORT198_FN6),
+	PINMUX_DATA(LCD1_D18_MARK,		PORT198_FN7),
+
+	/* Port199 */
+	PINMUX_DATA(MEMC_NWE_MARK,		PORT199_FN1),
+	PINMUX_DATA(SCIFA2_SCK_PORT199_MARK,	PORT199_FN2,	MSEL5CR_7_1),
+	PINMUX_DATA(RMII_TX_EN_MARK,		PORT199_FN3),
+	PINMUX_DATA(SIM_D_PORT199_MARK,		PORT199_FN4,	MSEL5CR_21_1),
+	PINMUX_DATA(STP1_IPD1_MARK,		PORT199_FN6),
+	PINMUX_DATA(LCD1_D13_MARK,		PORT199_FN7),
+
+	/* Port200 */
+	PINMUX_DATA(MEMC_NOE_MARK,		PORT200_FN1),
+	PINMUX_DATA(SCIFA2_RXD_MARK,		PORT200_FN2),
+	PINMUX_DATA(RMII_TXD0_MARK,		PORT200_FN3),
+	PINMUX_DATA(STP0_IPD7_MARK,		PORT200_FN6),
+	PINMUX_DATA(LCD1_D12_MARK,		PORT200_FN7),
+
+	/* Port201 */
+	PINMUX_DATA(MEMC_WAIT_MARK,		PORT201_FN1,	MSEL4CR_6_0),
+	PINMUX_DATA(MEMC_DREQ1_MARK,		PORT201_FN1,	MSEL4CR_6_1),
+
+	PINMUX_DATA(SCIFA2_TXD_MARK,		PORT201_FN2),
+	PINMUX_DATA(RMII_TXD1_MARK,		PORT201_FN3),
+	PINMUX_DATA(STP0_IPD6_MARK,		PORT201_FN6),
+	PINMUX_DATA(LCD1_D11_MARK,		PORT201_FN7),
+
+	/* Port202 */
+	PINMUX_DATA(MEMC_BUSCLK_MARK,		PORT202_FN1,	MSEL4CR_6_0),
+	PINMUX_DATA(MEMC_A0_MARK,		PORT202_FN1,	MSEL4CR_6_1),
+
+	PINMUX_DATA(MSIOF1_SS2_PORT202_MARK,	PORT202_FN2,	MSEL4CR_10_1),
+	PINMUX_DATA(RMII_MDC_MARK,		PORT202_FN3),
+	PINMUX_DATA(TPU0TO2_PORT202_MARK,	PORT202_FN4,	MSEL5CR_25_1),
+	PINMUX_DATA(IDE_CS0_MARK,		PORT202_FN6),
+	PINMUX_DATA(SDHI2_CD_PORT202_MARK,	PORT202_FN7,	MSEL5CR_19_1),
+	PINMUX_DATA(IRQ21_MARK,			PORT202_FN0),
+
+	/* Port203 - Port208 Function1 */
+	PINMUX_DATA(SDHI2_CLK_MARK,		PORT203_FN1),
+	PINMUX_DATA(SDHI2_CMD_MARK,		PORT204_FN1),
+	PINMUX_DATA(SDHI2_D0_MARK,		PORT205_FN1),
+	PINMUX_DATA(SDHI2_D1_MARK,		PORT206_FN1),
+	PINMUX_DATA(SDHI2_D2_MARK,		PORT207_FN1),
+	PINMUX_DATA(SDHI2_D3_MARK,		PORT208_FN1),
+
+	/* Port203 - Port208 Function3 */
+	PINMUX_DATA(ET_TX_ER_MARK,		PORT203_FN3),
+	PINMUX_DATA(ET_RX_ER_MARK,		PORT204_FN3),
+	PINMUX_DATA(ET_CRS_MARK,		PORT205_FN3),
+	PINMUX_DATA(ET_MDC_MARK,		PORT206_FN3),
+	PINMUX_DATA(ET_MDIO_MARK,		PORT207_FN3),
+	PINMUX_DATA(RMII_MDIO_MARK,		PORT208_FN3),
+
+	/* Port203 - Port208 Function6 */
+	PINMUX_DATA(IDE_A2_MARK,		PORT203_FN6),
+	PINMUX_DATA(IDE_A1_MARK,		PORT204_FN6),
+	PINMUX_DATA(IDE_A0_MARK,		PORT205_FN6),
+	PINMUX_DATA(IDE_IODACK_MARK,		PORT206_FN6),
+	PINMUX_DATA(IDE_IODREQ_MARK,		PORT207_FN6),
+	PINMUX_DATA(IDE_CS1_MARK,		PORT208_FN6),
+
+	/* Port203 - Port208 Function7 */
+	PINMUX_DATA(SCIFA4_TXD_PORT203_MARK, PORT203_FN7, MSEL5CR_12_0,
+			MSEL5CR_11_1),
+	PINMUX_DATA(SCIFA4_RXD_PORT204_MARK, PORT204_FN7, MSEL5CR_12_0,
+			MSEL5CR_11_1),
+	PINMUX_DATA(SCIFA4_SCK_PORT205_MARK, PORT205_FN7, MSEL5CR_10_1),
+	PINMUX_DATA(SCIFA5_SCK_PORT206_MARK, PORT206_FN7, MSEL5CR_13_1),
+	PINMUX_DATA(SCIFA5_RXD_PORT207_MARK, PORT207_FN7, MSEL5CR_15_0,
+			MSEL5CR_14_1),
+	PINMUX_DATA(SCIFA5_TXD_PORT208_MARK, PORT208_FN7, MSEL5CR_15_0,
+			MSEL5CR_14_1),
+
+	/* Port209 */
+	PINMUX_DATA(VBUS_MARK, PORT209_FN1),
+	PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_1),
+
+	/* Port210 */
+	PINMUX_DATA(IRQ9_PORT210_MARK, PORT210_FN0, MSEL1CR_9_1),
+
+	/* Port211 */
+	PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1),
+
+	/* LCDC select */
+	PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0),
+	PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1),
+
+	/* SDENC */
+	PINMUX_DATA(SDENC_CPG_MARK,	MSEL4CR_19_0),
+	PINMUX_DATA(SDENC_DV_CLKI_MARK,	MSEL4CR_19_1),
+
+	/* SYSC */
+	PINMUX_DATA(RESETP_PULLUP_MARK,	MSEL4CR_4_0),
+	PINMUX_DATA(RESETP_PLAIN_MARK, MSEL4CR_4_1),
+
+	/* DEBUG */
+	PINMUX_DATA(EDEBGREQ_PULLDOWN_MARK, MSEL4CR_1_0),
+	PINMUX_DATA(EDEBGREQ_PULLUP_MARK, MSEL4CR_1_1),
+
+	PINMUX_DATA(TRACEAUD_FROM_VIO_MARK,	MSEL5CR_30_0, MSEL5CR_29_0),
+	PINMUX_DATA(TRACEAUD_FROM_LCDC0_MARK, MSEL5CR_30_0, MSEL5CR_29_1),
+	PINMUX_DATA(TRACEAUD_FROM_MEMC_MARK, MSEL5CR_30_1, MSEL5CR_29_0),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+	/* PORT */
+	GPIO_PORT_ALL(),
+
+	/* IRQ */
+	GPIO_FN(IRQ0_PORT2),	GPIO_FN(IRQ0_PORT13),
+	GPIO_FN(IRQ1),
+	GPIO_FN(IRQ2_PORT11),	GPIO_FN(IRQ2_PORT12),
+	GPIO_FN(IRQ3_PORT10),	GPIO_FN(IRQ3_PORT14),
+	GPIO_FN(IRQ4_PORT15),	GPIO_FN(IRQ4_PORT172),
+	GPIO_FN(IRQ5_PORT0),	GPIO_FN(IRQ5_PORT1),
+	GPIO_FN(IRQ6_PORT121),	GPIO_FN(IRQ6_PORT173),
+	GPIO_FN(IRQ7_PORT120),	GPIO_FN(IRQ7_PORT209),
+	GPIO_FN(IRQ8),
+	GPIO_FN(IRQ9_PORT118),	GPIO_FN(IRQ9_PORT210),
+	GPIO_FN(IRQ10),
+	GPIO_FN(IRQ11),
+	GPIO_FN(IRQ12_PORT42),	GPIO_FN(IRQ12_PORT97),
+	GPIO_FN(IRQ13_PORT64),	GPIO_FN(IRQ13_PORT98),
+	GPIO_FN(IRQ14_PORT63),	GPIO_FN(IRQ14_PORT99),
+	GPIO_FN(IRQ15_PORT62),	GPIO_FN(IRQ15_PORT100),
+	GPIO_FN(IRQ16_PORT68),	GPIO_FN(IRQ16_PORT211),
+	GPIO_FN(IRQ17),
+	GPIO_FN(IRQ18),
+	GPIO_FN(IRQ19),
+	GPIO_FN(IRQ20),
+	GPIO_FN(IRQ21),
+	GPIO_FN(IRQ22),
+	GPIO_FN(IRQ23),
+	GPIO_FN(IRQ24),
+	GPIO_FN(IRQ25),
+	GPIO_FN(IRQ26_PORT58),	GPIO_FN(IRQ26_PORT81),
+	GPIO_FN(IRQ27_PORT57),	GPIO_FN(IRQ27_PORT168),
+	GPIO_FN(IRQ28_PORT56),	GPIO_FN(IRQ28_PORT169),
+	GPIO_FN(IRQ29_PORT50),	GPIO_FN(IRQ29_PORT170),
+	GPIO_FN(IRQ30_PORT49),	GPIO_FN(IRQ30_PORT171),
+	GPIO_FN(IRQ31_PORT41),	GPIO_FN(IRQ31_PORT167),
+
+	/* Function */
+
+	/* DBGT */
+	GPIO_FN(DBGMDT2),	GPIO_FN(DBGMDT1),	GPIO_FN(DBGMDT0),
+	GPIO_FN(DBGMD10),	GPIO_FN(DBGMD11),	GPIO_FN(DBGMD20),
+	GPIO_FN(DBGMD21),
+
+	/* FSI */
+	GPIO_FN(FSIAISLD_PORT0),	/* FSIAISLD Port 0/5 */
+	GPIO_FN(FSIAISLD_PORT5),
+	GPIO_FN(FSIASPDIF_PORT9),	/* FSIASPDIF Port 9/18 */
+	GPIO_FN(FSIASPDIF_PORT18),
+	GPIO_FN(FSIAOSLD1),	GPIO_FN(FSIAOSLD2),	GPIO_FN(FSIAOLR),
+	GPIO_FN(FSIAOBT),	GPIO_FN(FSIAOSLD),	GPIO_FN(FSIAOMC),
+	GPIO_FN(FSIACK),	GPIO_FN(FSIAILR),	GPIO_FN(FSIAIBT),
+
+	/* FMSI */
+	GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */
+	GPIO_FN(FMSISLD_PORT6),
+	GPIO_FN(FMSIILR),	GPIO_FN(FMSIIBT),	GPIO_FN(FMSIOLR),
+	GPIO_FN(FMSIOBT),	GPIO_FN(FMSICK),	GPIO_FN(FMSOILR),
+	GPIO_FN(FMSOIBT),	GPIO_FN(FMSOOLR),	GPIO_FN(FMSOOBT),
+	GPIO_FN(FMSOSLD),	GPIO_FN(FMSOCK),
+
+	/* SCIFA0 */
+	GPIO_FN(SCIFA0_SCK),	GPIO_FN(SCIFA0_CTS),	GPIO_FN(SCIFA0_RTS),
+	GPIO_FN(SCIFA0_RXD),	GPIO_FN(SCIFA0_TXD),
+
+	/* SCIFA1 */
+	GPIO_FN(SCIFA1_CTS),	GPIO_FN(SCIFA1_SCK),
+	GPIO_FN(SCIFA1_RXD),	GPIO_FN(SCIFA1_TXD),	GPIO_FN(SCIFA1_RTS),
+
+	/* SCIFA2 */
+	GPIO_FN(SCIFA2_SCK_PORT22), /* SCIFA2_SCK Port 22/199 */
+	GPIO_FN(SCIFA2_SCK_PORT199),
+	GPIO_FN(SCIFA2_RXD),	GPIO_FN(SCIFA2_TXD),
+	GPIO_FN(SCIFA2_CTS),	GPIO_FN(SCIFA2_RTS),
+
+	/* SCIFA3 */
+	GPIO_FN(SCIFA3_RTS_PORT105), /* MSEL5CR_8_0 */
+	GPIO_FN(SCIFA3_SCK_PORT116),
+	GPIO_FN(SCIFA3_CTS_PORT117),
+	GPIO_FN(SCIFA3_RXD_PORT174),
+	GPIO_FN(SCIFA3_TXD_PORT175),
+
+	GPIO_FN(SCIFA3_RTS_PORT161), /* MSEL5CR_8_1 */
+	GPIO_FN(SCIFA3_SCK_PORT158),
+	GPIO_FN(SCIFA3_CTS_PORT162),
+	GPIO_FN(SCIFA3_RXD_PORT159),
+	GPIO_FN(SCIFA3_TXD_PORT160),
+
+	/* SCIFA4 */
+	GPIO_FN(SCIFA4_RXD_PORT12), /* MSEL5CR[12:11] = 00 */
+	GPIO_FN(SCIFA4_TXD_PORT13),
+
+	GPIO_FN(SCIFA4_RXD_PORT204), /* MSEL5CR[12:11] = 01 */
+	GPIO_FN(SCIFA4_TXD_PORT203),
+
+	GPIO_FN(SCIFA4_RXD_PORT94), /* MSEL5CR[12:11] = 10 */
+	GPIO_FN(SCIFA4_TXD_PORT93),
+
+	GPIO_FN(SCIFA4_SCK_PORT21), /* SCIFA4_SCK Port 21/205 */
+	GPIO_FN(SCIFA4_SCK_PORT205),
+
+	/* SCIFA5 */
+	GPIO_FN(SCIFA5_TXD_PORT20), /* MSEL5CR[15:14] = 00 */
+	GPIO_FN(SCIFA5_RXD_PORT10),
+
+	GPIO_FN(SCIFA5_RXD_PORT207), /* MSEL5CR[15:14] = 01 */
+	GPIO_FN(SCIFA5_TXD_PORT208),
+
+	GPIO_FN(SCIFA5_TXD_PORT91), /* MSEL5CR[15:14] = 10 */
+	GPIO_FN(SCIFA5_RXD_PORT92),
+
+	GPIO_FN(SCIFA5_SCK_PORT23), /* SCIFA5_SCK Port 23/206 */
+	GPIO_FN(SCIFA5_SCK_PORT206),
+
+	/* SCIFA6 */
+	GPIO_FN(SCIFA6_SCK),	GPIO_FN(SCIFA6_RXD),	GPIO_FN(SCIFA6_TXD),
+
+	/* SCIFA7 */
+	GPIO_FN(SCIFA7_TXD),	GPIO_FN(SCIFA7_RXD),
+
+	/* SCIFAB */
+	GPIO_FN(SCIFB_SCK_PORT190), /* MSEL5CR_17_0 */
+	GPIO_FN(SCIFB_RXD_PORT191),
+	GPIO_FN(SCIFB_TXD_PORT192),
+	GPIO_FN(SCIFB_RTS_PORT186),
+	GPIO_FN(SCIFB_CTS_PORT187),
+
+	GPIO_FN(SCIFB_SCK_PORT2), /* MSEL5CR_17_1 */
+	GPIO_FN(SCIFB_RXD_PORT3),
+	GPIO_FN(SCIFB_TXD_PORT4),
+	GPIO_FN(SCIFB_RTS_PORT172),
+	GPIO_FN(SCIFB_CTS_PORT173),
+
+	/* LCD0 */
+	GPIO_FN(LCD0_D0),	GPIO_FN(LCD0_D1),	GPIO_FN(LCD0_D2),
+	GPIO_FN(LCD0_D3),	GPIO_FN(LCD0_D4),	GPIO_FN(LCD0_D5),
+	GPIO_FN(LCD0_D6),	GPIO_FN(LCD0_D7),	GPIO_FN(LCD0_D8),
+	GPIO_FN(LCD0_D9),	GPIO_FN(LCD0_D10),	GPIO_FN(LCD0_D11),
+	GPIO_FN(LCD0_D12),	GPIO_FN(LCD0_D13),	GPIO_FN(LCD0_D14),
+	GPIO_FN(LCD0_D15),	GPIO_FN(LCD0_D16),	GPIO_FN(LCD0_D17),
+	GPIO_FN(LCD0_DON),	GPIO_FN(LCD0_VCPWC),	GPIO_FN(LCD0_VEPWC),
+	GPIO_FN(LCD0_DCK),	GPIO_FN(LCD0_VSYN),
+	GPIO_FN(LCD0_HSYN),	GPIO_FN(LCD0_DISP),
+	GPIO_FN(LCD0_WR),	GPIO_FN(LCD0_RD),
+	GPIO_FN(LCD0_CS),	GPIO_FN(LCD0_RS),
+
+	GPIO_FN(LCD0_D18_PORT163),	GPIO_FN(LCD0_D19_PORT162),
+	GPIO_FN(LCD0_D20_PORT161),	GPIO_FN(LCD0_D21_PORT158),
+	GPIO_FN(LCD0_D22_PORT160),	GPIO_FN(LCD0_D23_PORT159),
+	GPIO_FN(LCD0_LCLK_PORT165),	/* MSEL5CR_6_1 */
+
+	GPIO_FN(LCD0_D18_PORT40),	GPIO_FN(LCD0_D19_PORT4),
+	GPIO_FN(LCD0_D20_PORT3),	GPIO_FN(LCD0_D21_PORT2),
+	GPIO_FN(LCD0_D22_PORT0),	GPIO_FN(LCD0_D23_PORT1),
+	GPIO_FN(LCD0_LCLK_PORT102),	/* MSEL5CR_6_0 */
+
+	/* LCD1 */
+	GPIO_FN(LCD1_D0),	GPIO_FN(LCD1_D1),	GPIO_FN(LCD1_D2),
+	GPIO_FN(LCD1_D3),	GPIO_FN(LCD1_D4),	GPIO_FN(LCD1_D5),
+	GPIO_FN(LCD1_D6),	GPIO_FN(LCD1_D7),	GPIO_FN(LCD1_D8),
+	GPIO_FN(LCD1_D9),	GPIO_FN(LCD1_D10),	GPIO_FN(LCD1_D11),
+	GPIO_FN(LCD1_D12),	GPIO_FN(LCD1_D13),	GPIO_FN(LCD1_D14),
+	GPIO_FN(LCD1_D15),	GPIO_FN(LCD1_D16),	GPIO_FN(LCD1_D17),
+	GPIO_FN(LCD1_D18),	GPIO_FN(LCD1_D19),	GPIO_FN(LCD1_D20),
+	GPIO_FN(LCD1_D21),	GPIO_FN(LCD1_D22),	GPIO_FN(LCD1_D23),
+	GPIO_FN(LCD1_RS),	GPIO_FN(LCD1_RD),	GPIO_FN(LCD1_CS),
+	GPIO_FN(LCD1_WR),	GPIO_FN(LCD1_DCK),	GPIO_FN(LCD1_DON),
+	GPIO_FN(LCD1_VCPWC),	GPIO_FN(LCD1_LCLK),	GPIO_FN(LCD1_HSYN),
+	GPIO_FN(LCD1_VSYN),	GPIO_FN(LCD1_VEPWC),	GPIO_FN(LCD1_DISP),
+
+	/* RSPI */
+	GPIO_FN(RSPI_SSL0_A),	GPIO_FN(RSPI_SSL1_A),	GPIO_FN(RSPI_SSL2_A),
+	GPIO_FN(RSPI_SSL3_A),	GPIO_FN(RSPI_CK_A),	GPIO_FN(RSPI_MOSI_A),
+	GPIO_FN(RSPI_MISO_A),
+
+	/* VIO CKO */
+	GPIO_FN(VIO_CKO1),
+	GPIO_FN(VIO_CKO2),
+	GPIO_FN(VIO_CKO_1),
+	GPIO_FN(VIO_CKO),
+
+	/* VIO0 */
+	GPIO_FN(VIO0_D0),	GPIO_FN(VIO0_D1),	GPIO_FN(VIO0_D2),
+	GPIO_FN(VIO0_D3),	GPIO_FN(VIO0_D4),	GPIO_FN(VIO0_D5),
+	GPIO_FN(VIO0_D6),	GPIO_FN(VIO0_D7),	GPIO_FN(VIO0_D8),
+	GPIO_FN(VIO0_D9),	GPIO_FN(VIO0_D10),	GPIO_FN(VIO0_D11),
+	GPIO_FN(VIO0_D12),	GPIO_FN(VIO0_VD),	GPIO_FN(VIO0_HD),
+	GPIO_FN(VIO0_CLK),	GPIO_FN(VIO0_FIELD),
+
+	GPIO_FN(VIO0_D13_PORT26), /* MSEL5CR_27_0 */
+	GPIO_FN(VIO0_D14_PORT25),
+	GPIO_FN(VIO0_D15_PORT24),
+
+	GPIO_FN(VIO0_D13_PORT22), /* MSEL5CR_27_1 */
+	GPIO_FN(VIO0_D14_PORT95),
+	GPIO_FN(VIO0_D15_PORT96),
+
+	/* VIO1 */
+	GPIO_FN(VIO1_D0),	GPIO_FN(VIO1_D1),	GPIO_FN(VIO1_D2),
+	GPIO_FN(VIO1_D3),	GPIO_FN(VIO1_D4),	GPIO_FN(VIO1_D5),
+	GPIO_FN(VIO1_D6),	GPIO_FN(VIO1_D7),	GPIO_FN(VIO1_VD),
+	GPIO_FN(VIO1_HD),	GPIO_FN(VIO1_CLK),	GPIO_FN(VIO1_FIELD),
+
+	/* TPU0 */
+	GPIO_FN(TPU0TO0),	GPIO_FN(TPU0TO1),	GPIO_FN(TPU0TO3),
+	GPIO_FN(TPU0TO2_PORT66), /* TPU0TO2 Port 66/202 */
+	GPIO_FN(TPU0TO2_PORT202),
+
+	/* SSP1 0 */
+	GPIO_FN(STP0_IPD0),	GPIO_FN(STP0_IPD1),	GPIO_FN(STP0_IPD2),
+	GPIO_FN(STP0_IPD3),	GPIO_FN(STP0_IPD4),	GPIO_FN(STP0_IPD5),
+	GPIO_FN(STP0_IPD6),	GPIO_FN(STP0_IPD7),	GPIO_FN(STP0_IPEN),
+	GPIO_FN(STP0_IPCLK),	GPIO_FN(STP0_IPSYNC),
+
+	/* SSP1 1 */
+	GPIO_FN(STP1_IPD1),	GPIO_FN(STP1_IPD2),	GPIO_FN(STP1_IPD3),
+	GPIO_FN(STP1_IPD4),	GPIO_FN(STP1_IPD5),	GPIO_FN(STP1_IPD6),
+	GPIO_FN(STP1_IPD7),	GPIO_FN(STP1_IPCLK),	GPIO_FN(STP1_IPSYNC),
+
+	GPIO_FN(STP1_IPD0_PORT186), /* MSEL5CR_23_0 */
+	GPIO_FN(STP1_IPEN_PORT187),
+
+	GPIO_FN(STP1_IPD0_PORT194), /* MSEL5CR_23_1 */
+	GPIO_FN(STP1_IPEN_PORT193),
+
+	/* SIM */
+	GPIO_FN(SIM_RST),	GPIO_FN(SIM_CLK),
+	GPIO_FN(SIM_D_PORT22), /* SIM_D  Port 22/199 */
+	GPIO_FN(SIM_D_PORT199),
+
+	/* SDHI0 */
+	GPIO_FN(SDHI0_D0),	GPIO_FN(SDHI0_D1),	GPIO_FN(SDHI0_D2),
+	GPIO_FN(SDHI0_D3),	GPIO_FN(SDHI0_CD),	GPIO_FN(SDHI0_WP),
+	GPIO_FN(SDHI0_CMD),	GPIO_FN(SDHI0_CLK),
+
+	/* SDHI1 */
+	GPIO_FN(SDHI1_D0),	GPIO_FN(SDHI1_D1),	GPIO_FN(SDHI1_D2),
+	GPIO_FN(SDHI1_D3),	GPIO_FN(SDHI1_CD),	GPIO_FN(SDHI1_WP),
+	GPIO_FN(SDHI1_CMD),	GPIO_FN(SDHI1_CLK),
+
+	/* SDHI2 */
+	GPIO_FN(SDHI2_D0),	GPIO_FN(SDHI2_D1),	GPIO_FN(SDHI2_D2),
+	GPIO_FN(SDHI2_D3),	GPIO_FN(SDHI2_CLK),	GPIO_FN(SDHI2_CMD),
+
+	GPIO_FN(SDHI2_CD_PORT24), /* MSEL5CR_19_0 */
+	GPIO_FN(SDHI2_WP_PORT25),
+
+	GPIO_FN(SDHI2_WP_PORT177), /* MSEL5CR_19_1 */
+	GPIO_FN(SDHI2_CD_PORT202),
+
+	/* MSIOF2 */
+	GPIO_FN(MSIOF2_TXD),	GPIO_FN(MSIOF2_RXD),	GPIO_FN(MSIOF2_TSCK),
+	GPIO_FN(MSIOF2_SS2),	GPIO_FN(MSIOF2_TSYNC),	GPIO_FN(MSIOF2_SS1),
+	GPIO_FN(MSIOF2_MCK1),	GPIO_FN(MSIOF2_MCK0),	GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(MSIOF2_RSCK),
+
+	/* KEYSC */
+	GPIO_FN(KEYIN4),	GPIO_FN(KEYIN5),
+	GPIO_FN(KEYIN6),	GPIO_FN(KEYIN7),
+	GPIO_FN(KEYOUT0),	GPIO_FN(KEYOUT1),	GPIO_FN(KEYOUT2),
+	GPIO_FN(KEYOUT3),	GPIO_FN(KEYOUT4),	GPIO_FN(KEYOUT5),
+	GPIO_FN(KEYOUT6),	GPIO_FN(KEYOUT7),
+
+	GPIO_FN(KEYIN0_PORT43), /* MSEL4CR_18_0 */
+	GPIO_FN(KEYIN1_PORT44),
+	GPIO_FN(KEYIN2_PORT45),
+	GPIO_FN(KEYIN3_PORT46),
+
+	GPIO_FN(KEYIN0_PORT58), /* MSEL4CR_18_1 */
+	GPIO_FN(KEYIN1_PORT57),
+	GPIO_FN(KEYIN2_PORT56),
+	GPIO_FN(KEYIN3_PORT55),
+
+	/* VOU */
+	GPIO_FN(DV_D0),		GPIO_FN(DV_D1),		GPIO_FN(DV_D2),
+	GPIO_FN(DV_D3),		GPIO_FN(DV_D4),		GPIO_FN(DV_D5),
+	GPIO_FN(DV_D6),		GPIO_FN(DV_D7),		GPIO_FN(DV_D8),
+	GPIO_FN(DV_D9),		GPIO_FN(DV_D10),	GPIO_FN(DV_D11),
+	GPIO_FN(DV_D12),	GPIO_FN(DV_D13),	GPIO_FN(DV_D14),
+	GPIO_FN(DV_D15),	GPIO_FN(DV_CLK),
+	GPIO_FN(DV_VSYNC),	GPIO_FN(DV_HSYNC),
+
+	/* MEMC */
+	GPIO_FN(MEMC_AD0),	GPIO_FN(MEMC_AD1),	GPIO_FN(MEMC_AD2),
+	GPIO_FN(MEMC_AD3),	GPIO_FN(MEMC_AD4),	GPIO_FN(MEMC_AD5),
+	GPIO_FN(MEMC_AD6),	GPIO_FN(MEMC_AD7),	GPIO_FN(MEMC_AD8),
+	GPIO_FN(MEMC_AD9),	GPIO_FN(MEMC_AD10),	GPIO_FN(MEMC_AD11),
+	GPIO_FN(MEMC_AD12),	GPIO_FN(MEMC_AD13),	GPIO_FN(MEMC_AD14),
+	GPIO_FN(MEMC_AD15),	GPIO_FN(MEMC_CS0),	GPIO_FN(MEMC_INT),
+	GPIO_FN(MEMC_NWE),	GPIO_FN(MEMC_NOE),	GPIO_FN(MEMC_CS1),
+	GPIO_FN(MEMC_A1),	GPIO_FN(MEMC_ADV),	GPIO_FN(MEMC_DREQ0),
+	GPIO_FN(MEMC_WAIT),	GPIO_FN(MEMC_DREQ1),	GPIO_FN(MEMC_BUSCLK),
+	GPIO_FN(MEMC_A0),
+
+	/* MMC */
+	GPIO_FN(MMC0_D0_PORT68),	GPIO_FN(MMC0_D1_PORT69),
+	GPIO_FN(MMC0_D2_PORT70),	GPIO_FN(MMC0_D3_PORT71),
+	GPIO_FN(MMC0_D4_PORT72),	GPIO_FN(MMC0_D5_PORT73),
+	GPIO_FN(MMC0_D6_PORT74),	GPIO_FN(MMC0_D7_PORT75),
+	GPIO_FN(MMC0_CLK_PORT66),
+	GPIO_FN(MMC0_CMD_PORT67),	/* MSEL4CR_15_0 */
+
+	GPIO_FN(MMC1_D0_PORT149),	GPIO_FN(MMC1_D1_PORT148),
+	GPIO_FN(MMC1_D2_PORT147),	GPIO_FN(MMC1_D3_PORT146),
+	GPIO_FN(MMC1_D4_PORT145),	GPIO_FN(MMC1_D5_PORT144),
+	GPIO_FN(MMC1_D6_PORT143),	GPIO_FN(MMC1_D7_PORT142),
+	GPIO_FN(MMC1_CLK_PORT103),
+	GPIO_FN(MMC1_CMD_PORT104),	/* MSEL4CR_15_1 */
+
+	/* MSIOF0 */
+	GPIO_FN(MSIOF0_SS1),	GPIO_FN(MSIOF0_SS2),	GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(MSIOF0_TXD),	GPIO_FN(MSIOF0_MCK0),	GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(MSIOF0_RSYNC),	GPIO_FN(MSIOF0_RSCK),	GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(MSIOF0_TSYNC),
+
+	/* MSIOF1 */
+	GPIO_FN(MSIOF1_RSCK),	GPIO_FN(MSIOF1_RSYNC),
+	GPIO_FN(MSIOF1_MCK0),	GPIO_FN(MSIOF1_MCK1),
+
+	GPIO_FN(MSIOF1_SS2_PORT116),	GPIO_FN(MSIOF1_SS1_PORT117),
+	GPIO_FN(MSIOF1_RXD_PORT118),	GPIO_FN(MSIOF1_TXD_PORT119),
+	GPIO_FN(MSIOF1_TSYNC_PORT120),
+	GPIO_FN(MSIOF1_TSCK_PORT121),	/* MSEL4CR_10_0 */
+
+	GPIO_FN(MSIOF1_SS1_PORT67),	GPIO_FN(MSIOF1_TSCK_PORT72),
+	GPIO_FN(MSIOF1_TSYNC_PORT73),	GPIO_FN(MSIOF1_TXD_PORT74),
+	GPIO_FN(MSIOF1_RXD_PORT75),
+	GPIO_FN(MSIOF1_SS2_PORT202),	/* MSEL4CR_10_1 */
+
+	/* GPIO */
+	GPIO_FN(GPO0),	GPIO_FN(GPI0),
+	GPIO_FN(GPO1),	GPIO_FN(GPI1),
+
+	/* USB0 */
+	GPIO_FN(USB0_OCI),	GPIO_FN(USB0_PPON),	GPIO_FN(VBUS),
+
+	/* USB1 */
+	GPIO_FN(USB1_OCI),	GPIO_FN(USB1_PPON),
+
+	/* BBIF1 */
+	GPIO_FN(BBIF1_RXD),	GPIO_FN(BBIF1_TXD),	GPIO_FN(BBIF1_TSYNC),
+	GPIO_FN(BBIF1_TSCK),	GPIO_FN(BBIF1_RSCK),	GPIO_FN(BBIF1_RSYNC),
+	GPIO_FN(BBIF1_FLOW),	GPIO_FN(BBIF1_RX_FLOW_N),
+
+	/* BBIF2 */
+	GPIO_FN(BBIF2_TXD2_PORT5), /* MSEL5CR_0_0 */
+	GPIO_FN(BBIF2_RXD2_PORT60),
+	GPIO_FN(BBIF2_TSYNC2_PORT6),
+	GPIO_FN(BBIF2_TSCK2_PORT59),
+
+	GPIO_FN(BBIF2_RXD2_PORT90), /* MSEL5CR_0_1 */
+	GPIO_FN(BBIF2_TXD2_PORT183),
+	GPIO_FN(BBIF2_TSCK2_PORT89),
+	GPIO_FN(BBIF2_TSYNC2_PORT184),
+
+	/* BSC / FLCTL / PCMCIA */
+	GPIO_FN(CS0),	GPIO_FN(CS2),	GPIO_FN(CS4),
+	GPIO_FN(CS5B),	GPIO_FN(CS6A),
+	GPIO_FN(CS5A_PORT105), /* CS5A PORT 19/105 */
+	GPIO_FN(CS5A_PORT19),
+	GPIO_FN(IOIS16), /* ? */
+
+	GPIO_FN(A0),	GPIO_FN(A1),	GPIO_FN(A2),	GPIO_FN(A3),
+	GPIO_FN(A4_FOE),	GPIO_FN(A5_FCDE),	/* share with FLCTL */
+	GPIO_FN(A6),	GPIO_FN(A7),	GPIO_FN(A8),	GPIO_FN(A9),
+	GPIO_FN(A10),	GPIO_FN(A11),	GPIO_FN(A12),	GPIO_FN(A13),
+	GPIO_FN(A14),	GPIO_FN(A15),	GPIO_FN(A16),	GPIO_FN(A17),
+	GPIO_FN(A18),	GPIO_FN(A19),	GPIO_FN(A20),	GPIO_FN(A21),
+	GPIO_FN(A22),	GPIO_FN(A23),	GPIO_FN(A24),	GPIO_FN(A25),
+	GPIO_FN(A26),
+
+	GPIO_FN(D0_NAF0),	GPIO_FN(D1_NAF1),	/* share with FLCTL */
+	GPIO_FN(D2_NAF2),	GPIO_FN(D3_NAF3),	/* share with FLCTL */
+	GPIO_FN(D4_NAF4),	GPIO_FN(D5_NAF5),	/* share with FLCTL */
+	GPIO_FN(D6_NAF6),	GPIO_FN(D7_NAF7),	/* share with FLCTL */
+	GPIO_FN(D8_NAF8),	GPIO_FN(D9_NAF9),	/* share with FLCTL */
+	GPIO_FN(D10_NAF10),	GPIO_FN(D11_NAF11),	/* share with FLCTL */
+	GPIO_FN(D12_NAF12),	GPIO_FN(D13_NAF13),	/* share with FLCTL */
+	GPIO_FN(D14_NAF14),	GPIO_FN(D15_NAF15),	/* share with FLCTL */
+	GPIO_FN(D16),	GPIO_FN(D17),	GPIO_FN(D18),	GPIO_FN(D19),
+	GPIO_FN(D20),	GPIO_FN(D21),	GPIO_FN(D22),	GPIO_FN(D23),
+	GPIO_FN(D24),	GPIO_FN(D25),	GPIO_FN(D26),	GPIO_FN(D27),
+	GPIO_FN(D28),	GPIO_FN(D29),	GPIO_FN(D30),	GPIO_FN(D31),
+
+	GPIO_FN(WE0_FWE),	/* share with FLCTL */
+	GPIO_FN(WE1),
+	GPIO_FN(WE2_ICIORD),	/* share with PCMCIA */
+	GPIO_FN(WE3_ICIOWR),	/* share with PCMCIA */
+	GPIO_FN(CKO),	GPIO_FN(BS),	GPIO_FN(RDWR),
+	GPIO_FN(RD_FSC),	/* share with FLCTL */
+	GPIO_FN(WAIT_PORT177), /* WAIT Port 90/177 */
+	GPIO_FN(WAIT_PORT90),
+
+	GPIO_FN(FCE0),	GPIO_FN(FCE1),	GPIO_FN(FRB), /* FLCTL */
+
+	/* IRDA */
+	GPIO_FN(IRDA_FIRSEL),	GPIO_FN(IRDA_IN),	GPIO_FN(IRDA_OUT),
+
+	/* ATAPI */
+	GPIO_FN(IDE_D0),	GPIO_FN(IDE_D1),	GPIO_FN(IDE_D2),
+	GPIO_FN(IDE_D3),	GPIO_FN(IDE_D4),	GPIO_FN(IDE_D5),
+	GPIO_FN(IDE_D6),	GPIO_FN(IDE_D7),	GPIO_FN(IDE_D8),
+	GPIO_FN(IDE_D9),	GPIO_FN(IDE_D10),	GPIO_FN(IDE_D11),
+	GPIO_FN(IDE_D12),	GPIO_FN(IDE_D13),	GPIO_FN(IDE_D14),
+	GPIO_FN(IDE_D15),	GPIO_FN(IDE_A0),	GPIO_FN(IDE_A1),
+	GPIO_FN(IDE_A2),	GPIO_FN(IDE_CS0),	GPIO_FN(IDE_CS1),
+	GPIO_FN(IDE_IOWR),	GPIO_FN(IDE_IORD),	GPIO_FN(IDE_IORDY),
+	GPIO_FN(IDE_INT),	GPIO_FN(IDE_RST),	GPIO_FN(IDE_DIRECTION),
+	GPIO_FN(IDE_EXBUF_ENB),	GPIO_FN(IDE_IODACK),	GPIO_FN(IDE_IODREQ),
+
+	/* RMII */
+	GPIO_FN(RMII_CRS_DV),	GPIO_FN(RMII_RX_ER),	GPIO_FN(RMII_RXD0),
+	GPIO_FN(RMII_RXD1),	GPIO_FN(RMII_TX_EN),	GPIO_FN(RMII_TXD0),
+	GPIO_FN(RMII_MDC),	GPIO_FN(RMII_TXD1),	GPIO_FN(RMII_MDIO),
+	GPIO_FN(RMII_REF50CK),	GPIO_FN(RMII_REF125CK),	/* for GMII */
+
+	/* GEther */
+	GPIO_FN(ET_TX_CLK),	GPIO_FN(ET_TX_EN),	GPIO_FN(ET_ETXD0),
+	GPIO_FN(ET_ETXD1),	GPIO_FN(ET_ETXD2),	GPIO_FN(ET_ETXD3),
+	GPIO_FN(ET_ETXD4),	GPIO_FN(ET_ETXD5), /* for GEther */
+	GPIO_FN(ET_ETXD6),	GPIO_FN(ET_ETXD7), /* for GEther */
+	GPIO_FN(ET_COL),	GPIO_FN(ET_TX_ER),	GPIO_FN(ET_RX_CLK),
+	GPIO_FN(ET_RX_DV),	GPIO_FN(ET_ERXD0),	GPIO_FN(ET_ERXD1),
+	GPIO_FN(ET_ERXD2),	GPIO_FN(ET_ERXD3),
+	GPIO_FN(ET_ERXD4),	GPIO_FN(ET_ERXD5), /* for GEther */
+	GPIO_FN(ET_ERXD6),	GPIO_FN(ET_ERXD7), /* for GEther */
+	GPIO_FN(ET_RX_ER),	GPIO_FN(ET_CRS),	GPIO_FN(ET_MDC),
+	GPIO_FN(ET_MDIO),	GPIO_FN(ET_LINK),	GPIO_FN(ET_PHY_INT),
+	GPIO_FN(ET_WOL),	GPIO_FN(ET_GTX_CLK),
+
+	/* DMA0 */
+	GPIO_FN(DREQ0),	GPIO_FN(DACK0),
+
+	/* DMA1 */
+	GPIO_FN(DREQ1),	GPIO_FN(DACK1),
+
+	/* SYSC */
+	GPIO_FN(RESETOUTS),
+
+	/* IRREM */
+	GPIO_FN(IROUT),
+
+	/* LCDC */
+	GPIO_FN(LCDC0_SELECT),
+	GPIO_FN(LCDC1_SELECT),
+
+	/* SDENC */
+	GPIO_FN(SDENC_CPG),
+	GPIO_FN(SDENC_DV_CLKI),
+
+	/* SYSC */
+	GPIO_FN(RESETP_PULLUP),
+	GPIO_FN(RESETP_PLAIN),
+
+	/* DEBUG */
+	GPIO_FN(EDEBGREQ_PULLDOWN),
+	GPIO_FN(EDEBGREQ_PULLUP),
+
+	GPIO_FN(TRACEAUD_FROM_VIO),
+	GPIO_FN(TRACEAUD_FROM_LCDC0),
+	GPIO_FN(TRACEAUD_FROM_MEMC),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0,	0xe6050000), /* PORT0CR */
+	PORTCR(1,	0xe6050001), /* PORT1CR */
+	PORTCR(2,	0xe6050002), /* PORT2CR */
+	PORTCR(3,	0xe6050003), /* PORT3CR */
+	PORTCR(4,	0xe6050004), /* PORT4CR */
+	PORTCR(5,	0xe6050005), /* PORT5CR */
+	PORTCR(6,	0xe6050006), /* PORT6CR */
+	PORTCR(7,	0xe6050007), /* PORT7CR */
+	PORTCR(8,	0xe6050008), /* PORT8CR */
+	PORTCR(9,	0xe6050009), /* PORT9CR */
+	PORTCR(10,	0xe605000a), /* PORT10CR */
+	PORTCR(11,	0xe605000b), /* PORT11CR */
+	PORTCR(12,	0xe605000c), /* PORT12CR */
+	PORTCR(13,	0xe605000d), /* PORT13CR */
+	PORTCR(14,	0xe605000e), /* PORT14CR */
+	PORTCR(15,	0xe605000f), /* PORT15CR */
+	PORTCR(16,	0xe6050010), /* PORT16CR */
+	PORTCR(17,	0xe6050011), /* PORT17CR */
+	PORTCR(18,	0xe6050012), /* PORT18CR */
+	PORTCR(19,	0xe6050013), /* PORT19CR */
+	PORTCR(20,	0xe6050014), /* PORT20CR */
+	PORTCR(21,	0xe6050015), /* PORT21CR */
+	PORTCR(22,	0xe6050016), /* PORT22CR */
+	PORTCR(23,	0xe6050017), /* PORT23CR */
+	PORTCR(24,	0xe6050018), /* PORT24CR */
+	PORTCR(25,	0xe6050019), /* PORT25CR */
+	PORTCR(26,	0xe605001a), /* PORT26CR */
+	PORTCR(27,	0xe605001b), /* PORT27CR */
+	PORTCR(28,	0xe605001c), /* PORT28CR */
+	PORTCR(29,	0xe605001d), /* PORT29CR */
+	PORTCR(30,	0xe605001e), /* PORT30CR */
+	PORTCR(31,	0xe605001f), /* PORT31CR */
+	PORTCR(32,	0xe6050020), /* PORT32CR */
+	PORTCR(33,	0xe6050021), /* PORT33CR */
+	PORTCR(34,	0xe6050022), /* PORT34CR */
+	PORTCR(35,	0xe6050023), /* PORT35CR */
+	PORTCR(36,	0xe6050024), /* PORT36CR */
+	PORTCR(37,	0xe6050025), /* PORT37CR */
+	PORTCR(38,	0xe6050026), /* PORT38CR */
+	PORTCR(39,	0xe6050027), /* PORT39CR */
+	PORTCR(40,	0xe6050028), /* PORT40CR */
+	PORTCR(41,	0xe6050029), /* PORT41CR */
+	PORTCR(42,	0xe605002a), /* PORT42CR */
+	PORTCR(43,	0xe605002b), /* PORT43CR */
+	PORTCR(44,	0xe605002c), /* PORT44CR */
+	PORTCR(45,	0xe605002d), /* PORT45CR */
+	PORTCR(46,	0xe605002e), /* PORT46CR */
+	PORTCR(47,	0xe605002f), /* PORT47CR */
+	PORTCR(48,	0xe6050030), /* PORT48CR */
+	PORTCR(49,	0xe6050031), /* PORT49CR */
+	PORTCR(50,	0xe6050032), /* PORT50CR */
+	PORTCR(51,	0xe6050033), /* PORT51CR */
+	PORTCR(52,	0xe6050034), /* PORT52CR */
+	PORTCR(53,	0xe6050035), /* PORT53CR */
+	PORTCR(54,	0xe6050036), /* PORT54CR */
+	PORTCR(55,	0xe6050037), /* PORT55CR */
+	PORTCR(56,	0xe6050038), /* PORT56CR */
+	PORTCR(57,	0xe6050039), /* PORT57CR */
+	PORTCR(58,	0xe605003a), /* PORT58CR */
+	PORTCR(59,	0xe605003b), /* PORT59CR */
+	PORTCR(60,	0xe605003c), /* PORT60CR */
+	PORTCR(61,	0xe605003d), /* PORT61CR */
+	PORTCR(62,	0xe605003e), /* PORT62CR */
+	PORTCR(63,	0xe605003f), /* PORT63CR */
+	PORTCR(64,	0xe6050040), /* PORT64CR */
+	PORTCR(65,	0xe6050041), /* PORT65CR */
+	PORTCR(66,	0xe6050042), /* PORT66CR */
+	PORTCR(67,	0xe6050043), /* PORT67CR */
+	PORTCR(68,	0xe6050044), /* PORT68CR */
+	PORTCR(69,	0xe6050045), /* PORT69CR */
+	PORTCR(70,	0xe6050046), /* PORT70CR */
+	PORTCR(71,	0xe6050047), /* PORT71CR */
+	PORTCR(72,	0xe6050048), /* PORT72CR */
+	PORTCR(73,	0xe6050049), /* PORT73CR */
+	PORTCR(74,	0xe605004a), /* PORT74CR */
+	PORTCR(75,	0xe605004b), /* PORT75CR */
+	PORTCR(76,	0xe605004c), /* PORT76CR */
+	PORTCR(77,	0xe605004d), /* PORT77CR */
+	PORTCR(78,	0xe605004e), /* PORT78CR */
+	PORTCR(79,	0xe605004f), /* PORT79CR */
+	PORTCR(80,	0xe6050050), /* PORT80CR */
+	PORTCR(81,	0xe6050051), /* PORT81CR */
+	PORTCR(82,	0xe6050052), /* PORT82CR */
+	PORTCR(83,	0xe6050053), /* PORT83CR */
+
+	PORTCR(84,	0xe6051054), /* PORT84CR */
+	PORTCR(85,	0xe6051055), /* PORT85CR */
+	PORTCR(86,	0xe6051056), /* PORT86CR */
+	PORTCR(87,	0xe6051057), /* PORT87CR */
+	PORTCR(88,	0xe6051058), /* PORT88CR */
+	PORTCR(89,	0xe6051059), /* PORT89CR */
+	PORTCR(90,	0xe605105a), /* PORT90CR */
+	PORTCR(91,	0xe605105b), /* PORT91CR */
+	PORTCR(92,	0xe605105c), /* PORT92CR */
+	PORTCR(93,	0xe605105d), /* PORT93CR */
+	PORTCR(94,	0xe605105e), /* PORT94CR */
+	PORTCR(95,	0xe605105f), /* PORT95CR */
+	PORTCR(96,	0xe6051060), /* PORT96CR */
+	PORTCR(97,	0xe6051061), /* PORT97CR */
+	PORTCR(98,	0xe6051062), /* PORT98CR */
+	PORTCR(99,	0xe6051063), /* PORT99CR */
+	PORTCR(100,	0xe6051064), /* PORT100CR */
+	PORTCR(101,	0xe6051065), /* PORT101CR */
+	PORTCR(102,	0xe6051066), /* PORT102CR */
+	PORTCR(103,	0xe6051067), /* PORT103CR */
+	PORTCR(104,	0xe6051068), /* PORT104CR */
+	PORTCR(105,	0xe6051069), /* PORT105CR */
+	PORTCR(106,	0xe605106a), /* PORT106CR */
+	PORTCR(107,	0xe605106b), /* PORT107CR */
+	PORTCR(108,	0xe605106c), /* PORT108CR */
+	PORTCR(109,	0xe605106d), /* PORT109CR */
+	PORTCR(110,	0xe605106e), /* PORT110CR */
+	PORTCR(111,	0xe605106f), /* PORT111CR */
+	PORTCR(112,	0xe6051070), /* PORT112CR */
+	PORTCR(113,	0xe6051071), /* PORT113CR */
+	PORTCR(114,	0xe6051072), /* PORT114CR */
+
+	PORTCR(115,	0xe6052073), /* PORT115CR */
+	PORTCR(116,	0xe6052074), /* PORT116CR */
+	PORTCR(117,	0xe6052075), /* PORT117CR */
+	PORTCR(118,	0xe6052076), /* PORT118CR */
+	PORTCR(119,	0xe6052077), /* PORT119CR */
+	PORTCR(120,	0xe6052078), /* PORT120CR */
+	PORTCR(121,	0xe6052079), /* PORT121CR */
+	PORTCR(122,	0xe605207a), /* PORT122CR */
+	PORTCR(123,	0xe605207b), /* PORT123CR */
+	PORTCR(124,	0xe605207c), /* PORT124CR */
+	PORTCR(125,	0xe605207d), /* PORT125CR */
+	PORTCR(126,	0xe605207e), /* PORT126CR */
+	PORTCR(127,	0xe605207f), /* PORT127CR */
+	PORTCR(128,	0xe6052080), /* PORT128CR */
+	PORTCR(129,	0xe6052081), /* PORT129CR */
+	PORTCR(130,	0xe6052082), /* PORT130CR */
+	PORTCR(131,	0xe6052083), /* PORT131CR */
+	PORTCR(132,	0xe6052084), /* PORT132CR */
+	PORTCR(133,	0xe6052085), /* PORT133CR */
+	PORTCR(134,	0xe6052086), /* PORT134CR */
+	PORTCR(135,	0xe6052087), /* PORT135CR */
+	PORTCR(136,	0xe6052088), /* PORT136CR */
+	PORTCR(137,	0xe6052089), /* PORT137CR */
+	PORTCR(138,	0xe605208a), /* PORT138CR */
+	PORTCR(139,	0xe605208b), /* PORT139CR */
+	PORTCR(140,	0xe605208c), /* PORT140CR */
+	PORTCR(141,	0xe605208d), /* PORT141CR */
+	PORTCR(142,	0xe605208e), /* PORT142CR */
+	PORTCR(143,	0xe605208f), /* PORT143CR */
+	PORTCR(144,	0xe6052090), /* PORT144CR */
+	PORTCR(145,	0xe6052091), /* PORT145CR */
+	PORTCR(146,	0xe6052092), /* PORT146CR */
+	PORTCR(147,	0xe6052093), /* PORT147CR */
+	PORTCR(148,	0xe6052094), /* PORT148CR */
+	PORTCR(149,	0xe6052095), /* PORT149CR */
+	PORTCR(150,	0xe6052096), /* PORT150CR */
+	PORTCR(151,	0xe6052097), /* PORT151CR */
+	PORTCR(152,	0xe6052098), /* PORT152CR */
+	PORTCR(153,	0xe6052099), /* PORT153CR */
+	PORTCR(154,	0xe605209a), /* PORT154CR */
+	PORTCR(155,	0xe605209b), /* PORT155CR */
+	PORTCR(156,	0xe605209c), /* PORT156CR */
+	PORTCR(157,	0xe605209d), /* PORT157CR */
+	PORTCR(158,	0xe605209e), /* PORT158CR */
+	PORTCR(159,	0xe605209f), /* PORT159CR */
+	PORTCR(160,	0xe60520a0), /* PORT160CR */
+	PORTCR(161,	0xe60520a1), /* PORT161CR */
+	PORTCR(162,	0xe60520a2), /* PORT162CR */
+	PORTCR(163,	0xe60520a3), /* PORT163CR */
+	PORTCR(164,	0xe60520a4), /* PORT164CR */
+	PORTCR(165,	0xe60520a5), /* PORT165CR */
+	PORTCR(166,	0xe60520a6), /* PORT166CR */
+	PORTCR(167,	0xe60520a7), /* PORT167CR */
+	PORTCR(168,	0xe60520a8), /* PORT168CR */
+	PORTCR(169,	0xe60520a9), /* PORT169CR */
+	PORTCR(170,	0xe60520aa), /* PORT170CR */
+	PORTCR(171,	0xe60520ab), /* PORT171CR */
+	PORTCR(172,	0xe60520ac), /* PORT172CR */
+	PORTCR(173,	0xe60520ad), /* PORT173CR */
+	PORTCR(174,	0xe60520ae), /* PORT174CR */
+	PORTCR(175,	0xe60520af), /* PORT175CR */
+	PORTCR(176,	0xe60520b0), /* PORT176CR */
+	PORTCR(177,	0xe60520b1), /* PORT177CR */
+	PORTCR(178,	0xe60520b2), /* PORT178CR */
+	PORTCR(179,	0xe60520b3), /* PORT179CR */
+	PORTCR(180,	0xe60520b4), /* PORT180CR */
+	PORTCR(181,	0xe60520b5), /* PORT181CR */
+	PORTCR(182,	0xe60520b6), /* PORT182CR */
+	PORTCR(183,	0xe60520b7), /* PORT183CR */
+	PORTCR(184,	0xe60520b8), /* PORT184CR */
+	PORTCR(185,	0xe60520b9), /* PORT185CR */
+	PORTCR(186,	0xe60520ba), /* PORT186CR */
+	PORTCR(187,	0xe60520bb), /* PORT187CR */
+	PORTCR(188,	0xe60520bc), /* PORT188CR */
+	PORTCR(189,	0xe60520bd), /* PORT189CR */
+	PORTCR(190,	0xe60520be), /* PORT190CR */
+	PORTCR(191,	0xe60520bf), /* PORT191CR */
+	PORTCR(192,	0xe60520c0), /* PORT192CR */
+	PORTCR(193,	0xe60520c1), /* PORT193CR */
+	PORTCR(194,	0xe60520c2), /* PORT194CR */
+	PORTCR(195,	0xe60520c3), /* PORT195CR */
+	PORTCR(196,	0xe60520c4), /* PORT196CR */
+	PORTCR(197,	0xe60520c5), /* PORT197CR */
+	PORTCR(198,	0xe60520c6), /* PORT198CR */
+	PORTCR(199,	0xe60520c7), /* PORT199CR */
+	PORTCR(200,	0xe60520c8), /* PORT200CR */
+	PORTCR(201,	0xe60520c9), /* PORT201CR */
+	PORTCR(202,	0xe60520ca), /* PORT202CR */
+	PORTCR(203,	0xe60520cb), /* PORT203CR */
+	PORTCR(204,	0xe60520cc), /* PORT204CR */
+	PORTCR(205,	0xe60520cd), /* PORT205CR */
+	PORTCR(206,	0xe60520ce), /* PORT206CR */
+	PORTCR(207,	0xe60520cf), /* PORT207CR */
+	PORTCR(208,	0xe60520d0), /* PORT208CR */
+	PORTCR(209,	0xe60520d1), /* PORT209CR */
+
+	PORTCR(210,	0xe60530d2), /* PORT210CR */
+	PORTCR(211,	0xe60530d3), /* PORT211CR */
+
+	{ PINMUX_CFG_REG("MSEL1CR", 0xe605800c, 32, 1) {
+			MSEL1CR_31_0,	MSEL1CR_31_1,
+			MSEL1CR_30_0,	MSEL1CR_30_1,
+			MSEL1CR_29_0,	MSEL1CR_29_1,
+			MSEL1CR_28_0,	MSEL1CR_28_1,
+			MSEL1CR_27_0,	MSEL1CR_27_1,
+			MSEL1CR_26_0,	MSEL1CR_26_1,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			MSEL1CR_16_0,	MSEL1CR_16_1,
+			MSEL1CR_15_0,	MSEL1CR_15_1,
+			MSEL1CR_14_0,	MSEL1CR_14_1,
+			MSEL1CR_13_0,	MSEL1CR_13_1,
+			MSEL1CR_12_0,	MSEL1CR_12_1,
+			0, 0, 0, 0,
+			MSEL1CR_9_0,	MSEL1CR_9_1,
+			0, 0,
+			MSEL1CR_7_0,	MSEL1CR_7_1,
+			MSEL1CR_6_0,	MSEL1CR_6_1,
+			MSEL1CR_5_0,	MSEL1CR_5_1,
+			MSEL1CR_4_0,	MSEL1CR_4_1,
+			MSEL1CR_3_0,	MSEL1CR_3_1,
+			MSEL1CR_2_0,	MSEL1CR_2_1,
+			0, 0,
+			MSEL1CR_0_0,	MSEL1CR_0_1,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			MSEL3CR_15_0,	MSEL3CR_15_1,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			MSEL3CR_6_0,	MSEL3CR_6_1,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0,
+			}
+	},
+	{ PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			MSEL4CR_19_0,	MSEL4CR_19_1,
+			MSEL4CR_18_0,	MSEL4CR_18_1,
+			0, 0, 0, 0,
+			MSEL4CR_15_0,	MSEL4CR_15_1,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			MSEL4CR_10_0,	MSEL4CR_10_1,
+			0, 0, 0, 0, 0, 0,
+			MSEL4CR_6_0,	MSEL4CR_6_1,
+			0, 0,
+			MSEL4CR_4_0,	MSEL4CR_4_1,
+			0, 0, 0, 0,
+			MSEL4CR_1_0,	MSEL4CR_1_1,
+			0, 0,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL5CR", 0xE6058028, 32, 1) {
+			MSEL5CR_31_0,	MSEL5CR_31_1,
+			MSEL5CR_30_0,	MSEL5CR_30_1,
+			MSEL5CR_29_0,	MSEL5CR_29_1,
+			0, 0,
+			MSEL5CR_27_0,	MSEL5CR_27_1,
+			0, 0,
+			MSEL5CR_25_0,	MSEL5CR_25_1,
+			0, 0,
+			MSEL5CR_23_0,	MSEL5CR_23_1,
+			0, 0,
+			MSEL5CR_21_0,	MSEL5CR_21_1,
+			0, 0,
+			MSEL5CR_19_0,	MSEL5CR_19_1,
+			0, 0,
+			MSEL5CR_17_0,	MSEL5CR_17_1,
+			0, 0,
+			MSEL5CR_15_0,	MSEL5CR_15_1,
+			MSEL5CR_14_0,	MSEL5CR_14_1,
+			MSEL5CR_13_0,	MSEL5CR_13_1,
+			MSEL5CR_12_0,	MSEL5CR_12_1,
+			MSEL5CR_11_0,	MSEL5CR_11_1,
+			MSEL5CR_10_0,	MSEL5CR_10_1,
+			0, 0,
+			MSEL5CR_8_0,	MSEL5CR_8_1,
+			MSEL5CR_7_0,	MSEL5CR_7_1,
+			MSEL5CR_6_0,	MSEL5CR_6_1,
+			MSEL5CR_5_0,	MSEL5CR_5_1,
+			MSEL5CR_4_0,	MSEL5CR_4_1,
+			MSEL5CR_3_0,	MSEL5CR_3_1,
+			MSEL5CR_2_0,	MSEL5CR_2_1,
+			0, 0,
+			MSEL5CR_0_0,	MSEL5CR_0_1,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054800, 32) {
+		PORT31_DATA,	PORT30_DATA,	PORT29_DATA,	PORT28_DATA,
+		PORT27_DATA,	PORT26_DATA,	PORT25_DATA,	PORT24_DATA,
+		PORT23_DATA,	PORT22_DATA,	PORT21_DATA,	PORT20_DATA,
+		PORT19_DATA,	PORT18_DATA,	PORT17_DATA,	PORT16_DATA,
+		PORT15_DATA,	PORT14_DATA,	PORT13_DATA,	PORT12_DATA,
+		PORT11_DATA,	PORT10_DATA,	PORT9_DATA,	PORT8_DATA,
+		PORT7_DATA,	PORT6_DATA,	PORT5_DATA,	PORT4_DATA,
+		PORT3_DATA,	PORT2_DATA,	PORT1_DATA,	PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054804, 32) {
+		PORT63_DATA,	PORT62_DATA,	PORT61_DATA,	PORT60_DATA,
+		PORT59_DATA,	PORT58_DATA,	PORT57_DATA,	PORT56_DATA,
+		PORT55_DATA,	PORT54_DATA,	PORT53_DATA,	PORT52_DATA,
+		PORT51_DATA,	PORT50_DATA,	PORT49_DATA,	PORT48_DATA,
+		PORT47_DATA,	PORT46_DATA,	PORT45_DATA,	PORT44_DATA,
+		PORT43_DATA,	PORT42_DATA,	PORT41_DATA,	PORT40_DATA,
+		PORT39_DATA,	PORT38_DATA,	PORT37_DATA,	PORT36_DATA,
+		PORT35_DATA,	PORT34_DATA,	PORT33_DATA,	PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054808, 32) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PORT83_DATA,	PORT82_DATA,	PORT81_DATA,	PORT80_DATA,
+		PORT79_DATA,	PORT78_DATA,	PORT77_DATA,	PORT76_DATA,
+		PORT75_DATA,	PORT74_DATA,	PORT73_DATA,	PORT72_DATA,
+		PORT71_DATA,	PORT70_DATA,	PORT69_DATA,	PORT68_DATA,
+		PORT67_DATA,	PORT66_DATA,	PORT65_DATA,	PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD095_064DR", 0xe6055808, 32) {
+		PORT95_DATA,	PORT94_DATA,	PORT93_DATA,	PORT92_DATA,
+		PORT91_DATA,	PORT90_DATA,	PORT89_DATA,	PORT88_DATA,
+		PORT87_DATA,	PORT86_DATA,	PORT85_DATA,	PORT84_DATA,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0 }
+	},
+	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe605580c, 32) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0,		PORT114_DATA,	PORT113_DATA,	PORT112_DATA,
+		PORT111_DATA,	PORT110_DATA,	PORT109_DATA,	PORT108_DATA,
+		PORT107_DATA,	PORT106_DATA,	PORT105_DATA,	PORT104_DATA,
+		PORT103_DATA,	PORT102_DATA,	PORT101_DATA,	PORT100_DATA,
+		PORT99_DATA,	PORT98_DATA,	PORT97_DATA,	PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR127_096DR", 0xe605680C, 32) {
+		PORT127_DATA,	PORT126_DATA,	PORT125_DATA,	PORT124_DATA,
+		PORT123_DATA,	PORT122_DATA,	PORT121_DATA,	PORT120_DATA,
+		PORT119_DATA,	PORT118_DATA,	PORT117_DATA,	PORT116_DATA,
+		PORT115_DATA,	0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0 }
+	},
+	{ PINMUX_DATA_REG("PORTR159_128DR", 0xe6056810, 32) {
+		PORT159_DATA,	PORT158_DATA,	PORT157_DATA,	PORT156_DATA,
+		PORT155_DATA,	PORT154_DATA,	PORT153_DATA,	PORT152_DATA,
+		PORT151_DATA,	PORT150_DATA,	PORT149_DATA,	PORT148_DATA,
+		PORT147_DATA,	PORT146_DATA,	PORT145_DATA,	PORT144_DATA,
+		PORT143_DATA,	PORT142_DATA,	PORT141_DATA,	PORT140_DATA,
+		PORT139_DATA,	PORT138_DATA,	PORT137_DATA,	PORT136_DATA,
+		PORT135_DATA,	PORT134_DATA,	PORT133_DATA,	PORT132_DATA,
+		PORT131_DATA,	PORT130_DATA,	PORT129_DATA,	PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056814, 32) {
+		PORT191_DATA,	PORT190_DATA,	PORT189_DATA,	PORT188_DATA,
+		PORT187_DATA,	PORT186_DATA,	PORT185_DATA,	PORT184_DATA,
+		PORT183_DATA,	PORT182_DATA,	PORT181_DATA,	PORT180_DATA,
+		PORT179_DATA,	PORT178_DATA,	PORT177_DATA,	PORT176_DATA,
+		PORT175_DATA,	PORT174_DATA,	PORT173_DATA,	PORT172_DATA,
+		PORT171_DATA,	PORT170_DATA,	PORT169_DATA,	PORT168_DATA,
+		PORT167_DATA,	PORT166_DATA,	PORT165_DATA,	PORT164_DATA,
+		PORT163_DATA,	PORT162_DATA,	PORT161_DATA,	PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056818, 32) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0,				PORT209_DATA,	PORT208_DATA,
+		PORT207_DATA,	PORT206_DATA,	PORT205_DATA,	PORT204_DATA,
+		PORT203_DATA,	PORT202_DATA,	PORT201_DATA,	PORT200_DATA,
+		PORT199_DATA,	PORT198_DATA,	PORT197_DATA,	PORT196_DATA,
+		PORT195_DATA,	PORT194_DATA,	PORT193_DATA,	PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU223_192DR", 0xe6057818, 32) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PORT211_DATA,	PORT210_DATA, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0 }
+	},
+	{ },
+};
+
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0,	 PORT13_FN0),	/* IRQ0A */
+	PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0),		/* IRQ1A */
+	PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0,	 PORT12_FN0),	/* IRQ2A */
+	PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0,	 PORT14_FN0),	/* IRQ3A */
+	PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0,	 PORT172_FN0),	/* IRQ4A */
+	PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0,	 PORT1_FN0),	/* IRQ5A */
+	PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0),	/* IRQ6A */
+	PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0),	/* IRQ7A */
+	PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0),		/* IRQ8A */
+	PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0),	/* IRQ9A */
+	PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0),		/* IRQ10A */
+	PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0),		/* IRQ11A */
+	PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0,	 PORT97_FN0),	/* IRQ12A */
+	PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0,	 PORT98_FN0),	/* IRQ13A */
+	PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0,	 PORT99_FN0),	/* IRQ14A */
+	PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0,	 PORT100_FN0),	/* IRQ15A */
+	PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0,	 PORT211_FN0),	/* IRQ16A */
+	PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0),		/* IRQ17A */
+	PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0),		/* IRQ18A */
+	PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0),		/* IRQ19A */
+	PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0),		/* IRQ20A */
+	PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0),		/* IRQ21A */
+	PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0),		/* IRQ22A */
+	PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0),		/* IRQ23A */
+	PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0),		/* IRQ24A */
+	PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0),		/* IRQ25A */
+	PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0,	 PORT81_FN0),	/* IRQ26A */
+	PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0,	 PORT168_FN0),	/* IRQ27A */
+	PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0,	 PORT169_FN0),	/* IRQ28A */
+	PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0,	 PORT170_FN0),	/* IRQ29A */
+	PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0,	 PORT171_FN0),	/* IRQ30A */
+	PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0,	 PORT167_FN0),	/* IRQ31A */
+};
+
+static struct pinmux_info r8a7740_pinmux_info = {
+	.name		= "r8a7740_pfc",
+	.reserved_id	= PINMUX_RESERVED,
+	.data		= { PINMUX_DATA_BEGIN,
+			    PINMUX_DATA_END },
+	.input		= { PINMUX_INPUT_BEGIN,
+			    PINMUX_INPUT_END },
+	.input_pu	= { PINMUX_INPUT_PULLUP_BEGIN,
+			    PINMUX_INPUT_PULLUP_END },
+	.input_pd	= { PINMUX_INPUT_PULLDOWN_BEGIN,
+			    PINMUX_INPUT_PULLDOWN_END },
+	.output		= { PINMUX_OUTPUT_BEGIN,
+			    PINMUX_OUTPUT_END },
+	.mark		= { PINMUX_MARK_BEGIN,
+			    PINMUX_MARK_END },
+	.function	= { PINMUX_FUNCTION_BEGIN,
+			    PINMUX_FUNCTION_END },
+
+	.first_gpio	= GPIO_PORT0,
+	.last_gpio	= GPIO_FN_TRACEAUD_FROM_MEMC,
+
+	.gpios		= pinmux_gpios,
+	.cfg_regs	= pinmux_config_regs,
+	.data_regs	= pinmux_data_regs,
+
+	.gpio_data	= pinmux_data,
+	.gpio_data_size	= ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq	= pinmux_irqs,
+	.gpio_irq_size	= ARRAY_SIZE(pinmux_irqs),
+};
+
+void r8a7740_pinmux_init(void)
+{
+	register_pinmux(&r8a7740_pinmux_info);
+}
diff --git a/roms/u-boot/arch/arm/mach-rmobile/pfc-r8a7790.h b/roms/u-boot/arch/arm/mach-rmobile/pfc-r8a7790.h
new file mode 100644
index 000000000..e911be403
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/pfc-r8a7790.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ */
+
+#ifndef __PFC_R8A7790_H__
+#define __PFC_R8A7790_H__
+
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+
+#define CPU_32_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx), PORT_1(fn, pfx##30, sfx),	\
+	PORT_1(fn, pfx##31, sfx)
+
+#define CPU_32_PORT2(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx)
+
+#if defined(CONFIG_R8A7790)
+#define CPU_32_PORT1(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx)				\
+/* GP_0_0_DATA -> GP_5_31_DATA (except for GP1[30],GP1[31],GP2[30],GP2[31]) */
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	CPU_32_PORT(fn, pfx##_0_, sfx),				\
+	CPU_32_PORT1(fn, pfx##_1_, sfx),			\
+	CPU_32_PORT2(fn, pfx##_2_, sfx),			\
+	CPU_32_PORT(fn, pfx##_3_, sfx),				\
+	CPU_32_PORT(fn, pfx##_4_, sfx),				\
+	CPU_32_PORT(fn, pfx##_5_, sfx)
+
+#elif defined(CONFIG_R8A7791)
+#define CPU_32_PORT1(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##20, sfx), PORT_1(fn, pfx##21, sfx),	\
+	PORT_1(fn, pfx##22, sfx), PORT_1(fn, pfx##23, sfx),	\
+	PORT_1(fn, pfx##24, sfx), PORT_1(fn, pfx##25, sfx)
+
+/*
+ * GP_0_0_DATA -> GP_7_25_DATA
+ * (except for GP1[26],GP1[27],GP1[28],GP1[29]),GP1[30]),GP1[31]
+ *  GP7[26],GP7[27],GP7[28],GP7[29]),GP7[30]),GP7[31])
+ */
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	CPU_32_PORT(fn, pfx##_0_, sfx),				\
+	CPU_32_PORT1(fn, pfx##_1_, sfx),			\
+	CPU_32_PORT(fn, pfx##_2_, sfx),				\
+	CPU_32_PORT(fn, pfx##_3_, sfx),				\
+	CPU_32_PORT(fn, pfx##_4_, sfx),				\
+	CPU_32_PORT(fn, pfx##_5_, sfx),				\
+	CPU_32_PORT(fn, pfx##_6_, sfx),				\
+	CPU_32_PORT1(fn, pfx##_7_, sfx)
+
+#elif defined(CONFIG_R8A7792)
+/*
+ * GP_0_0_DATA -> GP_11_29_DATA
+ * (except for GP0[29..31],GP1[23..31],GP3[28..31],GP4[17..31],GP5[17..31]
+ *  GP6[17..31],GP7[17..31],GP8[17..31],GP9[17..31],GP11[30..31])
+ */
+#define CPU_32_PORT0_28(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##20, sfx), PORT_1(fn, pfx##21, sfx),	\
+	PORT_1(fn, pfx##22, sfx), PORT_1(fn, pfx##23, sfx),	\
+	PORT_1(fn, pfx##24, sfx), PORT_1(fn, pfx##25, sfx),	\
+	PORT_1(fn, pfx##26, sfx), PORT_1(fn, pfx##27, sfx),	\
+	PORT_1(fn, pfx##28, sfx)
+
+#define CPU_32_PORT0_22(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##20, sfx), PORT_1(fn, pfx##21, sfx),	\
+	PORT_1(fn, pfx##22, sfx)
+
+#define CPU_32_PORT0_27(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##20, sfx), PORT_1(fn, pfx##21, sfx),	\
+	PORT_1(fn, pfx##22, sfx), PORT_1(fn, pfx##23, sfx),	\
+	PORT_1(fn, pfx##24, sfx), PORT_1(fn, pfx##25, sfx),	\
+	PORT_1(fn, pfx##26, sfx), PORT_1(fn, pfx##27, sfx)
+
+#define CPU_32_PORT0_16(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), 					\
+	PORT_1(fn, pfx##10, sfx),PORT_1(fn, pfx##11, sfx),	\
+	PORT_1(fn, pfx##12, sfx), PORT_1(fn, pfx##13, sfx),	\
+	PORT_1(fn, pfx##14, sfx), PORT_1(fn, pfx##15, sfx),	\
+	PORT_1(fn, pfx##16, sfx)
+
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	CPU_32_PORT0_28(fn, pfx##_0_, sfx),			\
+	CPU_32_PORT0_22(fn, pfx##_1_, sfx),			\
+	CPU_32_PORT(fn, pfx##_2_, sfx),				\
+	CPU_32_PORT0_27(fn, pfx##_3_, sfx),			\
+	CPU_32_PORT0_16(fn, pfx##_4_, sfx),			\
+	CPU_32_PORT0_16(fn, pfx##_5_, sfx),			\
+	CPU_32_PORT0_16(fn, pfx##_6_, sfx),			\
+	CPU_32_PORT0_16(fn, pfx##_7_, sfx),			\
+	CPU_32_PORT0_16(fn, pfx##_8_, sfx),			\
+	CPU_32_PORT0_16(fn, pfx##_9_, sfx),			\
+	CPU_32_PORT(fn, pfx##_10_, sfx),			\
+	CPU_32_PORT2(fn, pfx##_11_, sfx)
+
+#else
+#error "NO support"
+#endif
+
+#define _GP_GPIO(pfx, sfx) PINMUX_GPIO(GPIO_GP##pfx, GP##pfx##_DATA)
+#define _GP_DATA(pfx, sfx) PINMUX_DATA(GP##pfx##_DATA, GP##pfx##_FN,	\
+				       GP##pfx##_IN, GP##pfx##_OUT)
+
+#define _GP_INOUTSEL(pfx, sfx) GP##pfx##_IN, GP##pfx##_OUT
+#define _GP_INDT(pfx, sfx) GP##pfx##_DATA
+
+#define GP_ALL(str)	CPU_ALL_PORT(_PORT_ALL, GP, str)
+#define PINMUX_GPIO_GP_ALL()	CPU_ALL_PORT(_GP_GPIO, , unused)
+#define PINMUX_DATA_GP_ALL()	CPU_ALL_PORT(_GP_DATA, , unused)
+
+#define PORT_10_REV(fn, pfx, sfx)				\
+	PORT_1(fn, pfx##9, sfx), PORT_1(fn, pfx##8, sfx),	\
+	PORT_1(fn, pfx##7, sfx), PORT_1(fn, pfx##6, sfx),	\
+	PORT_1(fn, pfx##5, sfx), PORT_1(fn, pfx##4, sfx),	\
+	PORT_1(fn, pfx##3, sfx), PORT_1(fn, pfx##2, sfx),	\
+	PORT_1(fn, pfx##1, sfx), PORT_1(fn, pfx##0, sfx)
+
+#define CPU_32_PORT_REV(fn, pfx, sfx)					\
+	PORT_1(fn, pfx##31, sfx), PORT_1(fn, pfx##30, sfx),		\
+	PORT_10_REV(fn, pfx##2, sfx), PORT_10_REV(fn, pfx##1, sfx),	\
+	PORT_10_REV(fn, pfx, sfx)
+
+#define GP_INOUTSEL(bank) CPU_32_PORT_REV(_GP_INOUTSEL, _##bank##_, unused)
+#define GP_INDT(bank) CPU_32_PORT_REV(_GP_INDT, _##bank##_, unused)
+
+#define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##fn)
+#define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##ms, \
+							  FN_##ipsr, FN_##fn)
+
+#endif /* __PFC_R8A7790_H__ */
diff --git a/roms/u-boot/arch/arm/mach-rmobile/pfc-sh73a0.c b/roms/u-boot/arch/arm/mach-rmobile/pfc-sh73a0.c
new file mode 100644
index 000000000..55dab7c13
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/pfc-sh73a0.c
@@ -0,0 +1,2807 @@
+/*
+ * sh73a0 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ * Copyright (C) 2010 NISHIMOTO Hiroki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/arch/sh73a0-gpio.h>
+
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx,    sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx),	\
+	PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx),	\
+	PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx),	\
+	PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx),	\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx),	\
+	PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx),	\
+	PORT_1(fn, pfx##282, sfx),				\
+	PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx),	\
+	PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PORT_ALL(DATA),			/* PORT0_DATA -> PORT309_DATA */
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PORT_ALL(IN),			/* PORT0_IN -> PORT309_IN */
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_ALL(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_ALL(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PORT_ALL(OUT),			/* PORT0_OUT -> PORT309_OUT */
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_ALL(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
+	PORT_ALL(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
+	PORT_ALL(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
+	PORT_ALL(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
+	PORT_ALL(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
+	PORT_ALL(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
+	PORT_ALL(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
+	PORT_ALL(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
+	PORT_ALL(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
+	PORT_ALL(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
+
+	MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
+	MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
+	MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
+	MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
+	MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
+	MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
+	MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
+	MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
+	MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
+	MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
+	MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
+	MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
+	MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
+	MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
+	MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
+	MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
+	MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
+	MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
+	MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
+	MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
+	MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
+	MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
+	MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
+	MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
+	MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
+	MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
+	MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
+	MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
+	MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
+	MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
+	MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
+	MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
+	MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
+	MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
+	MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
+	MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
+	MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
+	MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
+	MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
+	MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
+	MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
+	MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* Hardware manual Table 25-1 (Function 0-7) */
+	VBUS_0_MARK,
+	GPI0_MARK,
+	GPI1_MARK,
+	GPI2_MARK,
+	GPI3_MARK,
+	GPI4_MARK,
+	GPI5_MARK,
+	GPI6_MARK,
+	GPI7_MARK,
+	SCIFA7_RXD_MARK,
+	SCIFA7_CTS__MARK,
+	GPO7_MARK, MFG0_OUT2_MARK,
+	GPO6_MARK, MFG1_OUT2_MARK,
+	GPO5_MARK, SCIFA0_SCK_MARK, FSICOSLDT3_MARK, PORT16_VIO_CKOR_MARK,
+	SCIFA0_TXD_MARK,
+	SCIFA7_TXD_MARK,
+	SCIFA7_RTS__MARK, PORT19_VIO_CKO2_MARK,
+	GPO0_MARK,
+	GPO1_MARK,
+	GPO2_MARK, STATUS0_MARK,
+	GPO3_MARK, STATUS1_MARK,
+	GPO4_MARK, STATUS2_MARK,
+	VINT_MARK,
+	TCKON_MARK,
+	XDVFS1_MARK, PORT27_I2C_SCL2_MARK, PORT27_I2C_SCL3_MARK, \
+	MFG0_OUT1_MARK, PORT27_IROUT_MARK,
+	XDVFS2_MARK, PORT28_I2C_SDA2_MARK, PORT28_I2C_SDA3_MARK, \
+	PORT28_TPU1TO1_MARK,
+	SIM_RST_MARK, PORT29_TPU1TO1_MARK,
+	SIM_CLK_MARK, PORT30_VIO_CKOR_MARK,
+	SIM_D_MARK, PORT31_IROUT_MARK,
+	SCIFA4_TXD_MARK,
+	SCIFA4_RXD_MARK, XWUP_MARK,
+	SCIFA4_RTS__MARK,
+	SCIFA4_CTS__MARK,
+	FSIBOBT_MARK, FSIBIBT_MARK,
+	FSIBOLR_MARK, FSIBILR_MARK,
+	FSIBOSLD_MARK,
+	FSIBISLD_MARK,
+	VACK_MARK,
+	XTAL1L_MARK,
+	SCIFA0_RTS__MARK, FSICOSLDT2_MARK,
+	SCIFA0_RXD_MARK,
+	SCIFA0_CTS__MARK, FSICOSLDT1_MARK,
+	FSICOBT_MARK, FSICIBT_MARK, FSIDOBT_MARK, FSIDIBT_MARK,
+	FSICOLR_MARK, FSICILR_MARK, FSIDOLR_MARK, FSIDILR_MARK,
+	FSICOSLD_MARK, PORT47_FSICSPDIF_MARK,
+	FSICISLD_MARK, FSIDISLD_MARK,
+	FSIACK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, FSIAOMC_MARK,
+	FSIAOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, FSIAILR_MARK,
+
+	FSIAOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, FSIAIBT_MARK,
+	FSIAOSLD_MARK, BBIF2_TXD2_MARK,
+	FSIASPDIF_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, FSIBSPDIF_MARK, \
+	PORT53_FSICSPDIF_MARK,
+	FSIBCK_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FSIBOMC_MARK, \
+	FSICCK_MARK, FSICOMC_MARK,
+	FSIAISLD_MARK, TPU0TO0_MARK,
+	A0_MARK, BS__MARK,
+	A12_MARK, PORT58_KEYOUT7_MARK, TPU4TO2_MARK,
+	A13_MARK, PORT59_KEYOUT6_MARK, TPU0TO1_MARK,
+	A14_MARK, KEYOUT5_MARK,
+	A15_MARK, KEYOUT4_MARK,
+	A16_MARK, KEYOUT3_MARK, MSIOF0_SS1_MARK,
+	A17_MARK, KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
+	A18_MARK, KEYOUT1_MARK, MSIOF0_TSCK_MARK,
+	A19_MARK, KEYOUT0_MARK, MSIOF0_TXD_MARK,
+	A20_MARK, KEYIN0_MARK, MSIOF0_RSCK_MARK,
+	A21_MARK, KEYIN1_MARK, MSIOF0_RSYNC_MARK,
+	A22_MARK, KEYIN2_MARK, MSIOF0_MCK0_MARK,
+	A23_MARK, KEYIN3_MARK, MSIOF0_MCK1_MARK,
+	A24_MARK, KEYIN4_MARK, MSIOF0_RXD_MARK,
+	A25_MARK, KEYIN5_MARK, MSIOF0_SS2_MARK,
+	A26_MARK, KEYIN6_MARK,
+	KEYIN7_MARK,
+	D0_NAF0_MARK,
+	D1_NAF1_MARK,
+	D2_NAF2_MARK,
+	D3_NAF3_MARK,
+	D4_NAF4_MARK,
+	D5_NAF5_MARK,
+	D6_NAF6_MARK,
+	D7_NAF7_MARK,
+	D8_NAF8_MARK,
+	D9_NAF9_MARK,
+	D10_NAF10_MARK,
+	D11_NAF11_MARK,
+	D12_NAF12_MARK,
+	D13_NAF13_MARK,
+	D14_NAF14_MARK,
+	D15_NAF15_MARK,
+	CS4__MARK,
+	CS5A__MARK, PORT91_RDWR_MARK,
+	CS5B__MARK, FCE1__MARK,
+	CS6B__MARK, DACK0_MARK,
+	FCE0__MARK, CS6A__MARK,
+	WAIT__MARK, DREQ0_MARK,
+	RD__FSC_MARK,
+	WE0__FWE_MARK, RDWR_FWE_MARK,
+	WE1__MARK,
+	FRB_MARK,
+	CKO_MARK,
+	NBRSTOUT__MARK,
+	NBRST__MARK,
+	BBIF2_TXD_MARK,
+	BBIF2_RXD_MARK,
+	BBIF2_SYNC_MARK,
+	BBIF2_SCK_MARK,
+	SCIFA3_CTS__MARK, MFG3_IN2_MARK,
+	SCIFA3_RXD_MARK, MFG3_IN1_MARK,
+	BBIF1_SS2_MARK, SCIFA3_RTS__MARK, MFG3_OUT1_MARK,
+	SCIFA3_TXD_MARK,
+	HSI_RX_DATA_MARK, BBIF1_RXD_MARK,
+	HSI_TX_WAKE_MARK, BBIF1_TSCK_MARK,
+	HSI_TX_DATA_MARK, BBIF1_TSYNC_MARK,
+	HSI_TX_READY_MARK, BBIF1_TXD_MARK,
+	HSI_RX_READY_MARK, BBIF1_RSCK_MARK, PORT115_I2C_SCL2_MARK, \
+	PORT115_I2C_SCL3_MARK,
+	HSI_RX_WAKE_MARK, BBIF1_RSYNC_MARK, PORT116_I2C_SDA2_MARK, \
+	PORT116_I2C_SDA3_MARK,
+	HSI_RX_FLAG_MARK, BBIF1_SS1_MARK, BBIF1_FLOW_MARK,
+	HSI_TX_FLAG_MARK,
+	VIO_VD_MARK, PORT128_LCD2VSYN_MARK, VIO2_VD_MARK, LCD2D0_MARK,
+
+	VIO_HD_MARK, PORT129_LCD2HSYN_MARK, PORT129_LCD2CS__MARK, \
+	VIO2_HD_MARK, LCD2D1_MARK,
+	VIO_D0_MARK, PORT130_MSIOF2_RXD_MARK, LCD2D10_MARK,
+	VIO_D1_MARK, PORT131_KEYOUT6_MARK, PORT131_MSIOF2_SS1_MARK, \
+	PORT131_KEYOUT11_MARK, LCD2D11_MARK,
+	VIO_D2_MARK, PORT132_KEYOUT7_MARK, PORT132_MSIOF2_SS2_MARK, \
+	PORT132_KEYOUT10_MARK, LCD2D12_MARK,
+	VIO_D3_MARK, MSIOF2_TSYNC_MARK, LCD2D13_MARK,
+	VIO_D4_MARK, MSIOF2_TXD_MARK, LCD2D14_MARK,
+	VIO_D5_MARK, MSIOF2_TSCK_MARK, LCD2D15_MARK,
+	VIO_D6_MARK, PORT136_KEYOUT8_MARK, LCD2D16_MARK,
+	VIO_D7_MARK, PORT137_KEYOUT9_MARK, LCD2D17_MARK,
+	VIO_D8_MARK, PORT138_KEYOUT8_MARK, VIO2_D0_MARK, LCD2D6_MARK,
+	VIO_D9_MARK, PORT139_KEYOUT9_MARK, VIO2_D1_MARK, LCD2D7_MARK,
+	VIO_D10_MARK, TPU0TO2_MARK, VIO2_D2_MARK, LCD2D8_MARK,
+	VIO_D11_MARK, TPU0TO3_MARK, VIO2_D3_MARK, LCD2D9_MARK,
+	VIO_D12_MARK, PORT142_KEYOUT10_MARK, VIO2_D4_MARK, LCD2D2_MARK,
+	VIO_D13_MARK, PORT143_KEYOUT11_MARK, PORT143_KEYOUT6_MARK, \
+	VIO2_D5_MARK, LCD2D3_MARK,
+	VIO_D14_MARK, PORT144_KEYOUT7_MARK, VIO2_D6_MARK, LCD2D4_MARK,
+	VIO_D15_MARK, TPU1TO3_MARK, PORT145_LCD2DISP_MARK, \
+	PORT145_LCD2RS_MARK, VIO2_D7_MARK, LCD2D5_MARK,
+	VIO_CLK_MARK, LCD2DCK_MARK, PORT146_LCD2WR__MARK, VIO2_CLK_MARK, \
+	LCD2D18_MARK,
+	VIO_FIELD_MARK, LCD2RD__MARK, VIO2_FIELD_MARK, LCD2D19_MARK,
+	VIO_CKO_MARK,
+	A27_MARK, PORT149_RDWR_MARK, MFG0_IN1_MARK, PORT149_KEYOUT9_MARK,
+	MFG0_IN2_MARK,
+	TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
+	TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
+	TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
+	SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
+	SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
+	SCIFA2_RTS1__MARK, PORT156_MSIOF2_SS2_MARK,
+	SCIFA2_CTS1__MARK, PORT157_MSIOF2_RXD_MARK,
+	DINT__MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+	PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
+	PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK,
+	PORT161_SCIFB_CTS__MARK, PORT161_SCIFA5_CTS__MARK,
+	PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK,
+	PORT163_SCIFB_RTS__MARK, PORT163_SCIFA5_RTS__MARK, TPU3TO0_MARK,
+	LCDD0_MARK,
+	LCDD1_MARK, PORT193_SCIFA5_CTS__MARK, BBIF2_TSYNC1_MARK,
+	LCDD2_MARK, PORT194_SCIFA5_RTS__MARK, BBIF2_TSCK1_MARK,
+	LCDD3_MARK, PORT195_SCIFA5_RXD_MARK, BBIF2_TXD1_MARK,
+	LCDD4_MARK, PORT196_SCIFA5_TXD_MARK,
+	LCDD5_MARK, PORT197_SCIFA5_SCK_MARK, MFG2_OUT2_MARK, TPU2TO1_MARK,
+	LCDD6_MARK,
+	LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK,
+	LCDD8_MARK, D16_MARK,
+	LCDD9_MARK, D17_MARK,
+	LCDD10_MARK, D18_MARK,
+	LCDD11_MARK, D19_MARK,
+	LCDD12_MARK, D20_MARK,
+	LCDD13_MARK, D21_MARK,
+	LCDD14_MARK, D22_MARK,
+	LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, D23_MARK,
+	LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, D24_MARK,
+	LCDD17_MARK, D25_MARK,
+	LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK,
+	LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK,
+	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK,
+	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK,
+	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK,
+	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK,
+	LCDDCK_MARK, LCDWR__MARK,
+	LCDRD__MARK, DACK2_MARK, PORT217_LCD2RS_MARK, MSIOF0L_TSYNC_MARK, \
+	VIO2_FIELD3_MARK, PORT217_LCD2DISP_MARK,
+	LCDHSYN_MARK, LCDCS__MARK, LCDCS2__MARK, DACK3_MARK, \
+	PORT218_VIO_CKOR_MARK,
+	LCDDISP_MARK, LCDRS_MARK, PORT219_LCD2WR__MARK, DREQ3_MARK, \
+	MSIOF0L_TSCK_MARK, VIO2_CLK3_MARK, LCD2DCK_2_MARK,
+	LCDVSYN_MARK, LCDVSYN2_MARK,
+	LCDLCLK_MARK, DREQ1_MARK, PORT221_LCD2CS__MARK, PWEN_MARK, \
+	MSIOF0L_RXD_MARK, VIO2_HD3_MARK, PORT221_LCD2HSYN_MARK,
+	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, \
+	VIO2_VD3_MARK, PORT222_LCD2VSYN_MARK,
+
+	SCIFA1_TXD_MARK, OVCN2_MARK,
+	EXTLP_MARK, SCIFA1_SCK_MARK, PORT226_VIO_CKO2_MARK,
+	SCIFA1_RTS__MARK, IDIN_MARK,
+	SCIFA1_RXD_MARK,
+	SCIFA1_CTS__MARK, MFG1_IN1_MARK,
+	MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK,
+	MSIOF1_TSYNC_MARK, SCIFA2_CTS2__MARK,
+	MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK,
+	MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK,
+	MSIOF1_RSCK_MARK, SCIFA2_RTS2__MARK, VIO2_CLK2_MARK, LCD2D20_MARK,
+	MSIOF1_RSYNC_MARK, MFG1_IN2_MARK, VIO2_VD2_MARK, LCD2D21_MARK,
+	MSIOF1_MCK0_MARK, PORT236_I2C_SDA2_MARK,
+	MSIOF1_MCK1_MARK, PORT237_I2C_SCL2_MARK,
+	MSIOF1_SS1_MARK, VIO2_FIELD2_MARK, LCD2D22_MARK,
+	MSIOF1_SS2_MARK, VIO2_HD2_MARK, LCD2D23_MARK,
+	SCIFA6_TXD_MARK,
+	PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, TPU4TO0_MARK,
+	PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
+	PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
+	PORT244_SCIFA5_CTS__MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS__MARK, \
+	MSIOF2R_RXD_MARK,
+	PORT245_SCIFA5_RTS__MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS__MARK, \
+	MSIOF2R_TXD_MARK,
+	PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, \
+	TPU1TO0_MARK,
+	PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, \
+	TPU3TO1_MARK,
+	PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, \
+	TPU2TO0_MARK, PORT248_I2C_SCL3_MARK, MSIOF2R_TSCK_MARK,
+	PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_I2C_SDA3_MARK, \
+	MSIOF2R_TSYNC_MARK,
+	SDHICLK0_MARK,
+	SDHICD0_MARK,
+	SDHID0_0_MARK,
+	SDHID0_1_MARK,
+	SDHID0_2_MARK,
+	SDHID0_3_MARK,
+	SDHICMD0_MARK,
+	SDHIWP0_MARK,
+	SDHICLK1_MARK,
+	SDHID1_0_MARK, TS_SPSYNC2_MARK,
+	SDHID1_1_MARK, TS_SDAT2_MARK,
+	SDHID1_2_MARK, TS_SDEN2_MARK,
+	SDHID1_3_MARK, TS_SCK2_MARK,
+	SDHICMD1_MARK,
+	SDHICLK2_MARK,
+	SDHID2_0_MARK, TS_SPSYNC4_MARK,
+	SDHID2_1_MARK, TS_SDAT4_MARK,
+	SDHID2_2_MARK, TS_SDEN4_MARK,
+	SDHID2_3_MARK, TS_SCK4_MARK,
+	SDHICMD2_MARK,
+	MMCCLK0_MARK,
+	MMCD0_0_MARK,
+	MMCD0_1_MARK,
+	MMCD0_2_MARK,
+	MMCD0_3_MARK,
+	MMCD0_4_MARK, TS_SPSYNC5_MARK,
+	MMCD0_5_MARK, TS_SDAT5_MARK,
+	MMCD0_6_MARK, TS_SDEN5_MARK,
+	MMCD0_7_MARK, TS_SCK5_MARK,
+	MMCCMD0_MARK,
+	RESETOUTS__MARK, EXTAL2OUT_MARK,
+	MCP_WAIT__MCP_FRB_MARK,
+	MCP_CKO_MARK, MMCCLK1_MARK,
+	MCP_D15_MCP_NAF15_MARK,
+	MCP_D14_MCP_NAF14_MARK,
+	MCP_D13_MCP_NAF13_MARK,
+	MCP_D12_MCP_NAF12_MARK,
+	MCP_D11_MCP_NAF11_MARK,
+	MCP_D10_MCP_NAF10_MARK,
+	MCP_D9_MCP_NAF9_MARK,
+	MCP_D8_MCP_NAF8_MARK, MMCCMD1_MARK,
+	MCP_D7_MCP_NAF7_MARK, MMCD1_7_MARK,
+
+	MCP_D6_MCP_NAF6_MARK, MMCD1_6_MARK,
+	MCP_D5_MCP_NAF5_MARK, MMCD1_5_MARK,
+	MCP_D4_MCP_NAF4_MARK, MMCD1_4_MARK,
+	MCP_D3_MCP_NAF3_MARK, MMCD1_3_MARK,
+	MCP_D2_MCP_NAF2_MARK, MMCD1_2_MARK,
+	MCP_D1_MCP_NAF1_MARK, MMCD1_1_MARK,
+	MCP_D0_MCP_NAF0_MARK, MMCD1_0_MARK,
+	MCP_NBRSTOUT__MARK,
+	MCP_WE0__MCP_FWE_MARK, MCP_RDWR_MCP_FWE_MARK,
+
+	/* MSEL2 special cases */
+	TSIF2_TS_XX1_MARK,
+	TSIF2_TS_XX2_MARK,
+	TSIF2_TS_XX3_MARK,
+	TSIF2_TS_XX4_MARK,
+	TSIF2_TS_XX5_MARK,
+	TSIF1_TS_XX1_MARK,
+	TSIF1_TS_XX2_MARK,
+	TSIF1_TS_XX3_MARK,
+	TSIF1_TS_XX4_MARK,
+	TSIF1_TS_XX5_MARK,
+	TSIF0_TS_XX1_MARK,
+	TSIF0_TS_XX2_MARK,
+	TSIF0_TS_XX3_MARK,
+	TSIF0_TS_XX4_MARK,
+	TSIF0_TS_XX5_MARK,
+	MST1_TS_XX1_MARK,
+	MST1_TS_XX2_MARK,
+	MST1_TS_XX3_MARK,
+	MST1_TS_XX4_MARK,
+	MST1_TS_XX5_MARK,
+	MST0_TS_XX1_MARK,
+	MST0_TS_XX2_MARK,
+	MST0_TS_XX3_MARK,
+	MST0_TS_XX4_MARK,
+	MST0_TS_XX5_MARK,
+
+	/* MSEL3 special cases */
+	SDHI0_VCCQ_MC0_ON_MARK,
+	SDHI0_VCCQ_MC0_OFF_MARK,
+	DEBUG_MON_VIO_MARK,
+	DEBUG_MON_LCDD_MARK,
+	LCDC_LCDC0_MARK,
+	LCDC_LCDC1_MARK,
+
+	/* MSEL4 special cases */
+	IRQ9_MEM_INT_MARK,
+	IRQ9_MCP_INT_MARK,
+	A11_MARK,
+	KEYOUT8_MARK,
+	TPU4TO3_MARK,
+	RESETA_N_PU_ON_MARK,
+	RESETA_N_PU_OFF_MARK,
+	EDBGREQ_PD_MARK,
+	EDBGREQ_PU_MARK,
+
+	/* Functions with pull-ups */
+	KEYIN0_PU_MARK,
+	KEYIN1_PU_MARK,
+	KEYIN2_PU_MARK,
+	KEYIN3_PU_MARK,
+	KEYIN4_PU_MARK,
+	KEYIN5_PU_MARK,
+	KEYIN6_PU_MARK,
+	KEYIN7_PU_MARK,
+	SDHICD0_PU_MARK,
+	SDHID0_0_PU_MARK,
+	SDHID0_1_PU_MARK,
+	SDHID0_2_PU_MARK,
+	SDHID0_3_PU_MARK,
+	SDHICMD0_PU_MARK,
+	SDHIWP0_PU_MARK,
+	SDHID1_0_PU_MARK,
+	SDHID1_1_PU_MARK,
+	SDHID1_2_PU_MARK,
+	SDHID1_3_PU_MARK,
+	SDHICMD1_PU_MARK,
+	SDHID2_0_PU_MARK,
+	SDHID2_1_PU_MARK,
+	SDHID2_2_PU_MARK,
+	SDHID2_3_PU_MARK,
+	SDHICMD2_PU_MARK,
+	MMCCMD0_PU_MARK,
+	MMCCMD1_PU_MARK,
+	MMCD0_0_PU_MARK,
+	MMCD0_1_PU_MARK,
+	MMCD0_2_PU_MARK,
+	MMCD0_3_PU_MARK,
+	MMCD0_4_PU_MARK,
+	MMCD0_5_PU_MARK,
+	MMCD0_6_PU_MARK,
+	MMCD0_7_PU_MARK,
+	FSIBISLD_PU_MARK,
+	FSIACK_PU_MARK,
+	FSIAILR_PU_MARK,
+	FSIAIBT_PU_MARK,
+	FSIAISLD_PU_MARK,
+
+	PINMUX_MARK_END,
+};
+
+static unsigned short pinmux_data[] = {
+	/* specify valid pin states for each pin in GPIO mode */
+
+	/* Table 25-1 (I/O and Pull U/D) */
+	PORT_DATA_I_PD(0),
+	PORT_DATA_I_PU(1),
+	PORT_DATA_I_PU(2),
+	PORT_DATA_I_PU(3),
+	PORT_DATA_I_PU(4),
+	PORT_DATA_I_PU(5),
+	PORT_DATA_I_PU(6),
+	PORT_DATA_I_PU(7),
+	PORT_DATA_I_PU(8),
+	PORT_DATA_I_PD(9),
+	PORT_DATA_I_PD(10),
+	PORT_DATA_I_PU_PD(11),
+	PORT_DATA_IO_PU_PD(12),
+	PORT_DATA_IO_PU_PD(13),
+	PORT_DATA_IO_PU_PD(14),
+	PORT_DATA_IO_PU_PD(15),
+	PORT_DATA_IO_PD(16),
+	PORT_DATA_IO_PD(17),
+	PORT_DATA_IO_PU(18),
+	PORT_DATA_IO_PU(19),
+	PORT_DATA_O(20),
+	PORT_DATA_O(21),
+	PORT_DATA_O(22),
+	PORT_DATA_O(23),
+	PORT_DATA_O(24),
+	PORT_DATA_I_PD(25),
+	PORT_DATA_I_PD(26),
+	PORT_DATA_IO_PU(27),
+	PORT_DATA_IO_PU(28),
+	PORT_DATA_IO_PD(29),
+	PORT_DATA_IO_PD(30),
+	PORT_DATA_IO_PU(31),
+	PORT_DATA_IO_PD(32),
+	PORT_DATA_I_PU_PD(33),
+	PORT_DATA_IO_PD(34),
+	PORT_DATA_I_PU_PD(35),
+	PORT_DATA_IO_PD(36),
+	PORT_DATA_IO(37),
+	PORT_DATA_O(38),
+	PORT_DATA_I_PU(39),
+	PORT_DATA_I_PU_PD(40),
+	PORT_DATA_O(41),
+	PORT_DATA_IO_PD(42),
+	PORT_DATA_IO_PU_PD(43),
+	PORT_DATA_IO_PU_PD(44),
+	PORT_DATA_IO_PD(45),
+	PORT_DATA_IO_PD(46),
+	PORT_DATA_IO_PD(47),
+	PORT_DATA_I_PD(48),
+	PORT_DATA_IO_PU_PD(49),
+	PORT_DATA_IO_PD(50),
+
+	PORT_DATA_IO_PD(51),
+	PORT_DATA_O(52),
+	PORT_DATA_IO_PU_PD(53),
+	PORT_DATA_IO_PU_PD(54),
+	PORT_DATA_IO_PD(55),
+	PORT_DATA_I_PU_PD(56),
+	PORT_DATA_IO(57),
+	PORT_DATA_IO(58),
+	PORT_DATA_IO(59),
+	PORT_DATA_IO(60),
+	PORT_DATA_IO(61),
+	PORT_DATA_IO_PD(62),
+	PORT_DATA_IO_PD(63),
+	PORT_DATA_IO_PU_PD(64),
+	PORT_DATA_IO_PD(65),
+	PORT_DATA_IO_PU_PD(66),
+	PORT_DATA_IO_PU_PD(67),
+	PORT_DATA_IO_PU_PD(68),
+	PORT_DATA_IO_PU_PD(69),
+	PORT_DATA_IO_PU_PD(70),
+	PORT_DATA_IO_PU_PD(71),
+	PORT_DATA_IO_PU_PD(72),
+	PORT_DATA_I_PU_PD(73),
+	PORT_DATA_IO_PU(74),
+	PORT_DATA_IO_PU(75),
+	PORT_DATA_IO_PU(76),
+	PORT_DATA_IO_PU(77),
+	PORT_DATA_IO_PU(78),
+	PORT_DATA_IO_PU(79),
+	PORT_DATA_IO_PU(80),
+	PORT_DATA_IO_PU(81),
+	PORT_DATA_IO_PU(82),
+	PORT_DATA_IO_PU(83),
+	PORT_DATA_IO_PU(84),
+	PORT_DATA_IO_PU(85),
+	PORT_DATA_IO_PU(86),
+	PORT_DATA_IO_PU(87),
+	PORT_DATA_IO_PU(88),
+	PORT_DATA_IO_PU(89),
+	PORT_DATA_O(90),
+	PORT_DATA_IO_PU(91),
+	PORT_DATA_O(92),
+	PORT_DATA_IO_PU(93),
+	PORT_DATA_O(94),
+	PORT_DATA_I_PU_PD(95),
+	PORT_DATA_IO(96),
+	PORT_DATA_IO(97),
+	PORT_DATA_IO(98),
+	PORT_DATA_I_PU(99),
+	PORT_DATA_O(100),
+	PORT_DATA_O(101),
+	PORT_DATA_I_PU(102),
+	PORT_DATA_IO_PD(103),
+	PORT_DATA_I_PU_PD(104),
+	PORT_DATA_I_PD(105),
+	PORT_DATA_I_PD(106),
+	PORT_DATA_I_PU_PD(107),
+	PORT_DATA_I_PU_PD(108),
+	PORT_DATA_IO_PD(109),
+	PORT_DATA_IO_PD(110),
+	PORT_DATA_IO_PU_PD(111),
+	PORT_DATA_IO_PU_PD(112),
+	PORT_DATA_IO_PU_PD(113),
+	PORT_DATA_IO_PD(114),
+	PORT_DATA_IO_PU(115),
+	PORT_DATA_IO_PU(116),
+	PORT_DATA_IO_PU_PD(117),
+	PORT_DATA_IO_PU_PD(118),
+	PORT_DATA_IO_PD(128),
+
+	PORT_DATA_IO_PD(129),
+	PORT_DATA_IO_PU_PD(130),
+	PORT_DATA_IO_PD(131),
+	PORT_DATA_IO_PD(132),
+	PORT_DATA_IO_PD(133),
+	PORT_DATA_IO_PU_PD(134),
+	PORT_DATA_IO_PU_PD(135),
+	PORT_DATA_IO_PU_PD(136),
+	PORT_DATA_IO_PU_PD(137),
+	PORT_DATA_IO_PD(138),
+	PORT_DATA_IO_PD(139),
+	PORT_DATA_IO_PD(140),
+	PORT_DATA_IO_PD(141),
+	PORT_DATA_IO_PD(142),
+	PORT_DATA_IO_PD(143),
+	PORT_DATA_IO_PU_PD(144),
+	PORT_DATA_IO_PD(145),
+	PORT_DATA_IO_PU_PD(146),
+	PORT_DATA_IO_PU_PD(147),
+	PORT_DATA_IO_PU_PD(148),
+	PORT_DATA_IO_PU_PD(149),
+	PORT_DATA_I_PU_PD(150),
+	PORT_DATA_IO_PU_PD(151),
+	PORT_DATA_IO_PU_PD(152),
+	PORT_DATA_IO_PD(153),
+	PORT_DATA_IO_PD(154),
+	PORT_DATA_I_PU_PD(155),
+	PORT_DATA_IO_PU_PD(156),
+	PORT_DATA_I_PD(157),
+	PORT_DATA_IO_PD(158),
+	PORT_DATA_IO_PU_PD(159),
+	PORT_DATA_IO_PU_PD(160),
+	PORT_DATA_I_PU_PD(161),
+	PORT_DATA_I_PU_PD(162),
+	PORT_DATA_IO_PU_PD(163),
+	PORT_DATA_I_PU_PD(164),
+	PORT_DATA_IO_PD(192),
+	PORT_DATA_IO_PU_PD(193),
+	PORT_DATA_IO_PD(194),
+	PORT_DATA_IO_PU_PD(195),
+	PORT_DATA_IO_PD(196),
+	PORT_DATA_IO_PD(197),
+	PORT_DATA_IO_PD(198),
+	PORT_DATA_IO_PD(199),
+	PORT_DATA_IO_PU_PD(200),
+	PORT_DATA_IO_PU_PD(201),
+	PORT_DATA_IO_PU_PD(202),
+	PORT_DATA_IO_PU_PD(203),
+	PORT_DATA_IO_PU_PD(204),
+	PORT_DATA_IO_PU_PD(205),
+	PORT_DATA_IO_PU_PD(206),
+	PORT_DATA_IO_PD(207),
+	PORT_DATA_IO_PD(208),
+	PORT_DATA_IO_PD(209),
+	PORT_DATA_IO_PD(210),
+	PORT_DATA_IO_PD(211),
+	PORT_DATA_IO_PD(212),
+	PORT_DATA_IO_PD(213),
+	PORT_DATA_IO_PU_PD(214),
+	PORT_DATA_IO_PU_PD(215),
+	PORT_DATA_IO_PD(216),
+	PORT_DATA_IO_PD(217),
+	PORT_DATA_O(218),
+	PORT_DATA_IO_PD(219),
+	PORT_DATA_IO_PD(220),
+	PORT_DATA_IO_PU_PD(221),
+	PORT_DATA_IO_PU_PD(222),
+	PORT_DATA_I_PU_PD(223),
+	PORT_DATA_I_PU_PD(224),
+
+	PORT_DATA_IO_PU_PD(225),
+	PORT_DATA_O(226),
+	PORT_DATA_IO_PU_PD(227),
+	PORT_DATA_I_PU_PD(228),
+	PORT_DATA_I_PD(229),
+	PORT_DATA_IO(230),
+	PORT_DATA_IO_PU_PD(231),
+	PORT_DATA_IO_PU_PD(232),
+	PORT_DATA_I_PU_PD(233),
+	PORT_DATA_IO_PU_PD(234),
+	PORT_DATA_IO_PU_PD(235),
+	PORT_DATA_IO_PU_PD(236),
+	PORT_DATA_IO_PD(237),
+	PORT_DATA_IO_PU_PD(238),
+	PORT_DATA_IO_PU_PD(239),
+	PORT_DATA_IO_PU_PD(240),
+	PORT_DATA_O(241),
+	PORT_DATA_I_PD(242),
+	PORT_DATA_IO_PU_PD(243),
+	PORT_DATA_IO_PU_PD(244),
+	PORT_DATA_IO_PU_PD(245),
+	PORT_DATA_IO_PU_PD(246),
+	PORT_DATA_IO_PU_PD(247),
+	PORT_DATA_IO_PU_PD(248),
+	PORT_DATA_IO_PU_PD(249),
+	PORT_DATA_IO_PU_PD(250),
+	PORT_DATA_IO_PU_PD(251),
+	PORT_DATA_IO_PU_PD(252),
+	PORT_DATA_IO_PU_PD(253),
+	PORT_DATA_IO_PU_PD(254),
+	PORT_DATA_IO_PU_PD(255),
+	PORT_DATA_IO_PU_PD(256),
+	PORT_DATA_IO_PU_PD(257),
+	PORT_DATA_IO_PU_PD(258),
+	PORT_DATA_IO_PU_PD(259),
+	PORT_DATA_IO_PU_PD(260),
+	PORT_DATA_IO_PU_PD(261),
+	PORT_DATA_IO_PU_PD(262),
+	PORT_DATA_IO_PU_PD(263),
+	PORT_DATA_IO_PU_PD(264),
+	PORT_DATA_IO_PU_PD(265),
+	PORT_DATA_IO_PU_PD(266),
+	PORT_DATA_IO_PU_PD(267),
+	PORT_DATA_IO_PU_PD(268),
+	PORT_DATA_IO_PU_PD(269),
+	PORT_DATA_IO_PU_PD(270),
+	PORT_DATA_IO_PU_PD(271),
+	PORT_DATA_IO_PU_PD(272),
+	PORT_DATA_IO_PU_PD(273),
+	PORT_DATA_IO_PU_PD(274),
+	PORT_DATA_IO_PU_PD(275),
+	PORT_DATA_IO_PU_PD(276),
+	PORT_DATA_IO_PU_PD(277),
+	PORT_DATA_IO_PU_PD(278),
+	PORT_DATA_IO_PU_PD(279),
+	PORT_DATA_IO_PU_PD(280),
+	PORT_DATA_O(281),
+	PORT_DATA_O(282),
+	PORT_DATA_I_PU(288),
+	PORT_DATA_IO_PU_PD(289),
+	PORT_DATA_IO_PU_PD(290),
+	PORT_DATA_IO_PU_PD(291),
+	PORT_DATA_IO_PU_PD(292),
+	PORT_DATA_IO_PU_PD(293),
+	PORT_DATA_IO_PU_PD(294),
+	PORT_DATA_IO_PU_PD(295),
+	PORT_DATA_IO_PU_PD(296),
+	PORT_DATA_IO_PU_PD(297),
+	PORT_DATA_IO_PU_PD(298),
+
+	PORT_DATA_IO_PU_PD(299),
+	PORT_DATA_IO_PU_PD(300),
+	PORT_DATA_IO_PU_PD(301),
+	PORT_DATA_IO_PU_PD(302),
+	PORT_DATA_IO_PU_PD(303),
+	PORT_DATA_IO_PU_PD(304),
+	PORT_DATA_IO_PU_PD(305),
+	PORT_DATA_O(306),
+	PORT_DATA_O(307),
+	PORT_DATA_I_PU(308),
+	PORT_DATA_O(309),
+
+	/* Table 25-1 (Function 0-7) */
+	PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
+	PINMUX_DATA(GPI0_MARK, PORT1_FN1),
+	PINMUX_DATA(GPI1_MARK, PORT2_FN1),
+	PINMUX_DATA(GPI2_MARK, PORT3_FN1),
+	PINMUX_DATA(GPI3_MARK, PORT4_FN1),
+	PINMUX_DATA(GPI4_MARK, PORT5_FN1),
+	PINMUX_DATA(GPI5_MARK, PORT6_FN1),
+	PINMUX_DATA(GPI6_MARK, PORT7_FN1),
+	PINMUX_DATA(GPI7_MARK, PORT8_FN1),
+	PINMUX_DATA(SCIFA7_RXD_MARK, PORT12_FN2),
+	PINMUX_DATA(SCIFA7_CTS__MARK, PORT13_FN2),
+	PINMUX_DATA(GPO7_MARK, PORT14_FN1), \
+	PINMUX_DATA(MFG0_OUT2_MARK, PORT14_FN4),
+	PINMUX_DATA(GPO6_MARK, PORT15_FN1), \
+	PINMUX_DATA(MFG1_OUT2_MARK, PORT15_FN4),
+	PINMUX_DATA(GPO5_MARK, PORT16_FN1), \
+	PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), \
+	PINMUX_DATA(FSICOSLDT3_MARK, PORT16_FN3), \
+	PINMUX_DATA(PORT16_VIO_CKOR_MARK, PORT16_FN4),
+	PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
+	PINMUX_DATA(SCIFA7_TXD_MARK, PORT18_FN2),
+	PINMUX_DATA(SCIFA7_RTS__MARK, PORT19_FN2), \
+	PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
+	PINMUX_DATA(GPO0_MARK, PORT20_FN1),
+	PINMUX_DATA(GPO1_MARK, PORT21_FN1),
+	PINMUX_DATA(GPO2_MARK, PORT22_FN1), \
+	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+	PINMUX_DATA(GPO3_MARK, PORT23_FN1), \
+	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+	PINMUX_DATA(GPO4_MARK, PORT24_FN1), \
+	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+	PINMUX_DATA(VINT_MARK, PORT25_FN1),
+	PINMUX_DATA(TCKON_MARK, PORT26_FN1),
+	PINMUX_DATA(XDVFS1_MARK, PORT27_FN1), \
+	PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
+		MSEL2CR_MSEL16_1), \
+	PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
+		MSEL2CR_MSEL18_1), \
+	PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
+	PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
+	PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
+	PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
+		MSEL2CR_MSEL16_1), \
+	PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
+		MSEL2CR_MSEL18_1), \
+	PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
+	PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
+	PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
+	PINMUX_DATA(SIM_CLK_MARK, PORT30_FN1), \
+	PINMUX_DATA(PORT30_VIO_CKOR_MARK, PORT30_FN4),
+	PINMUX_DATA(SIM_D_MARK, PORT31_FN1), \
+	PINMUX_DATA(PORT31_IROUT_MARK, PORT31_FN4),
+	PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
+	PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), \
+	PINMUX_DATA(XWUP_MARK, PORT33_FN3),
+	PINMUX_DATA(SCIFA4_RTS__MARK, PORT34_FN2),
+	PINMUX_DATA(SCIFA4_CTS__MARK, PORT35_FN2),
+	PINMUX_DATA(FSIBOBT_MARK, PORT36_FN1), \
+	PINMUX_DATA(FSIBIBT_MARK, PORT36_FN2),
+	PINMUX_DATA(FSIBOLR_MARK, PORT37_FN1), \
+	PINMUX_DATA(FSIBILR_MARK, PORT37_FN2),
+	PINMUX_DATA(FSIBOSLD_MARK, PORT38_FN1),
+	PINMUX_DATA(FSIBISLD_MARK, PORT39_FN1),
+	PINMUX_DATA(VACK_MARK, PORT40_FN1),
+	PINMUX_DATA(XTAL1L_MARK, PORT41_FN1),
+	PINMUX_DATA(SCIFA0_RTS__MARK, PORT42_FN2), \
+	PINMUX_DATA(FSICOSLDT2_MARK, PORT42_FN3),
+	PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
+	PINMUX_DATA(SCIFA0_CTS__MARK, PORT44_FN2), \
+	PINMUX_DATA(FSICOSLDT1_MARK, PORT44_FN3),
+	PINMUX_DATA(FSICOBT_MARK, PORT45_FN1), \
+	PINMUX_DATA(FSICIBT_MARK, PORT45_FN2), \
+	PINMUX_DATA(FSIDOBT_MARK, PORT45_FN3), \
+	PINMUX_DATA(FSIDIBT_MARK, PORT45_FN4),
+	PINMUX_DATA(FSICOLR_MARK, PORT46_FN1), \
+	PINMUX_DATA(FSICILR_MARK, PORT46_FN2), \
+	PINMUX_DATA(FSIDOLR_MARK, PORT46_FN3), \
+	PINMUX_DATA(FSIDILR_MARK, PORT46_FN4),
+	PINMUX_DATA(FSICOSLD_MARK, PORT47_FN1), \
+	PINMUX_DATA(PORT47_FSICSPDIF_MARK, PORT47_FN2),
+	PINMUX_DATA(FSICISLD_MARK, PORT48_FN1), \
+	PINMUX_DATA(FSIDISLD_MARK, PORT48_FN3),
+	PINMUX_DATA(FSIACK_MARK, PORT49_FN1), \
+	PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2, MSEL4CR_MSEL19_1), \
+	PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN4), \
+	PINMUX_DATA(FSIAOMC_MARK, PORT49_FN5),
+	PINMUX_DATA(FSIAOLR_MARK, PORT50_FN1), \
+	PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), \
+	PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), \
+	PINMUX_DATA(FSIAILR_MARK, PORT50_FN5),
+
+	PINMUX_DATA(FSIAOBT_MARK, PORT51_FN1), \
+	PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), \
+	PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), \
+	PINMUX_DATA(FSIAIBT_MARK, PORT51_FN5),
+	PINMUX_DATA(FSIAOSLD_MARK, PORT52_FN1), \
+	PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
+	PINMUX_DATA(FSIASPDIF_MARK, PORT53_FN1), \
+	PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2, MSEL4CR_MSEL19_1), \
+	PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), \
+	PINMUX_DATA(FSIBSPDIF_MARK, PORT53_FN5), \
+	PINMUX_DATA(PORT53_FSICSPDIF_MARK, PORT53_FN6),
+	PINMUX_DATA(FSIBCK_MARK, PORT54_FN1), \
+	PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2, MSEL4CR_MSEL19_1), \
+	PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), \
+	PINMUX_DATA(FSIBOMC_MARK, PORT54_FN5), \
+	PINMUX_DATA(FSICCK_MARK, PORT54_FN6), \
+	PINMUX_DATA(FSICOMC_MARK, PORT54_FN7),
+	PINMUX_DATA(FSIAISLD_MARK, PORT55_FN1), \
+	PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
+	PINMUX_DATA(A0_MARK, PORT57_FN1), \
+	PINMUX_DATA(BS__MARK, PORT57_FN2),
+	PINMUX_DATA(A12_MARK, PORT58_FN1), \
+	PINMUX_DATA(PORT58_KEYOUT7_MARK, PORT58_FN2), \
+	PINMUX_DATA(TPU4TO2_MARK, PORT58_FN4),
+	PINMUX_DATA(A13_MARK, PORT59_FN1), \
+	PINMUX_DATA(PORT59_KEYOUT6_MARK, PORT59_FN2), \
+	PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
+	PINMUX_DATA(A14_MARK, PORT60_FN1), \
+	PINMUX_DATA(KEYOUT5_MARK, PORT60_FN2),
+	PINMUX_DATA(A15_MARK, PORT61_FN1), \
+	PINMUX_DATA(KEYOUT4_MARK, PORT61_FN2),
+	PINMUX_DATA(A16_MARK, PORT62_FN1), \
+	PINMUX_DATA(KEYOUT3_MARK, PORT62_FN2), \
+	PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A17_MARK, PORT63_FN1), \
+	PINMUX_DATA(KEYOUT2_MARK, PORT63_FN2), \
+	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A18_MARK, PORT64_FN1), \
+	PINMUX_DATA(KEYOUT1_MARK, PORT64_FN2), \
+	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A19_MARK, PORT65_FN1), \
+	PINMUX_DATA(KEYOUT0_MARK, PORT65_FN2), \
+	PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A20_MARK, PORT66_FN1), \
+	PINMUX_DATA(KEYIN0_MARK, PORT66_FN2), \
+	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A21_MARK, PORT67_FN1), \
+	PINMUX_DATA(KEYIN1_MARK, PORT67_FN2), \
+	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A22_MARK, PORT68_FN1), \
+	PINMUX_DATA(KEYIN2_MARK, PORT68_FN2), \
+	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A23_MARK, PORT69_FN1), \
+	PINMUX_DATA(KEYIN3_MARK, PORT69_FN2), \
+	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A24_MARK, PORT70_FN1), \
+	PINMUX_DATA(KEYIN4_MARK, PORT70_FN2), \
+	PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A25_MARK, PORT71_FN1), \
+	PINMUX_DATA(KEYIN5_MARK, PORT71_FN2), \
+	PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A26_MARK, PORT72_FN1), \
+	PINMUX_DATA(KEYIN6_MARK, PORT72_FN2),
+	PINMUX_DATA(KEYIN7_MARK, PORT73_FN2),
+	PINMUX_DATA(D0_NAF0_MARK, PORT74_FN1),
+	PINMUX_DATA(D1_NAF1_MARK, PORT75_FN1),
+	PINMUX_DATA(D2_NAF2_MARK, PORT76_FN1),
+	PINMUX_DATA(D3_NAF3_MARK, PORT77_FN1),
+	PINMUX_DATA(D4_NAF4_MARK, PORT78_FN1),
+	PINMUX_DATA(D5_NAF5_MARK, PORT79_FN1),
+	PINMUX_DATA(D6_NAF6_MARK, PORT80_FN1),
+	PINMUX_DATA(D7_NAF7_MARK, PORT81_FN1),
+	PINMUX_DATA(D8_NAF8_MARK, PORT82_FN1),
+	PINMUX_DATA(D9_NAF9_MARK, PORT83_FN1),
+	PINMUX_DATA(D10_NAF10_MARK, PORT84_FN1),
+	PINMUX_DATA(D11_NAF11_MARK, PORT85_FN1),
+	PINMUX_DATA(D12_NAF12_MARK, PORT86_FN1),
+	PINMUX_DATA(D13_NAF13_MARK, PORT87_FN1),
+	PINMUX_DATA(D14_NAF14_MARK, PORT88_FN1),
+	PINMUX_DATA(D15_NAF15_MARK, PORT89_FN1),
+	PINMUX_DATA(CS4__MARK, PORT90_FN1),
+	PINMUX_DATA(CS5A__MARK, PORT91_FN1), \
+	PINMUX_DATA(PORT91_RDWR_MARK, PORT91_FN2),
+	PINMUX_DATA(CS5B__MARK, PORT92_FN1), \
+	PINMUX_DATA(FCE1__MARK, PORT92_FN2),
+	PINMUX_DATA(CS6B__MARK, PORT93_FN1), \
+	PINMUX_DATA(DACK0_MARK, PORT93_FN4),
+	PINMUX_DATA(FCE0__MARK, PORT94_FN1), \
+	PINMUX_DATA(CS6A__MARK, PORT94_FN2),
+	PINMUX_DATA(WAIT__MARK, PORT95_FN1), \
+	PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
+	PINMUX_DATA(RD__FSC_MARK, PORT96_FN1),
+	PINMUX_DATA(WE0__FWE_MARK, PORT97_FN1), \
+	PINMUX_DATA(RDWR_FWE_MARK, PORT97_FN2),
+	PINMUX_DATA(WE1__MARK, PORT98_FN1),
+	PINMUX_DATA(FRB_MARK, PORT99_FN1),
+	PINMUX_DATA(CKO_MARK, PORT100_FN1),
+	PINMUX_DATA(NBRSTOUT__MARK, PORT101_FN1),
+	PINMUX_DATA(NBRST__MARK, PORT102_FN1),
+	PINMUX_DATA(BBIF2_TXD_MARK, PORT103_FN3),
+	PINMUX_DATA(BBIF2_RXD_MARK, PORT104_FN3),
+	PINMUX_DATA(BBIF2_SYNC_MARK, PORT105_FN3),
+	PINMUX_DATA(BBIF2_SCK_MARK, PORT106_FN3),
+	PINMUX_DATA(SCIFA3_CTS__MARK, PORT107_FN3), \
+	PINMUX_DATA(MFG3_IN2_MARK, PORT107_FN4),
+	PINMUX_DATA(SCIFA3_RXD_MARK, PORT108_FN3), \
+	PINMUX_DATA(MFG3_IN1_MARK, PORT108_FN4),
+	PINMUX_DATA(BBIF1_SS2_MARK, PORT109_FN2), \
+	PINMUX_DATA(SCIFA3_RTS__MARK, PORT109_FN3), \
+	PINMUX_DATA(MFG3_OUT1_MARK, PORT109_FN4),
+	PINMUX_DATA(SCIFA3_TXD_MARK, PORT110_FN3),
+	PINMUX_DATA(HSI_RX_DATA_MARK, PORT111_FN1), \
+	PINMUX_DATA(BBIF1_RXD_MARK, PORT111_FN3),
+	PINMUX_DATA(HSI_TX_WAKE_MARK, PORT112_FN1), \
+	PINMUX_DATA(BBIF1_TSCK_MARK, PORT112_FN3),
+	PINMUX_DATA(HSI_TX_DATA_MARK, PORT113_FN1), \
+	PINMUX_DATA(BBIF1_TSYNC_MARK, PORT113_FN3),
+	PINMUX_DATA(HSI_TX_READY_MARK, PORT114_FN1), \
+	PINMUX_DATA(BBIF1_TXD_MARK, PORT114_FN3),
+	PINMUX_DATA(HSI_RX_READY_MARK, PORT115_FN1), \
+	PINMUX_DATA(BBIF1_RSCK_MARK, PORT115_FN3), \
+	PINMUX_DATA(PORT115_I2C_SCL2_MARK, PORT115_FN5, MSEL2CR_MSEL17_1), \
+	PINMUX_DATA(PORT115_I2C_SCL3_MARK, PORT115_FN6, MSEL2CR_MSEL19_1),
+	PINMUX_DATA(HSI_RX_WAKE_MARK, PORT116_FN1), \
+	PINMUX_DATA(BBIF1_RSYNC_MARK, PORT116_FN3), \
+	PINMUX_DATA(PORT116_I2C_SDA2_MARK, PORT116_FN5, MSEL2CR_MSEL17_1), \
+	PINMUX_DATA(PORT116_I2C_SDA3_MARK, PORT116_FN6, MSEL2CR_MSEL19_1),
+	PINMUX_DATA(HSI_RX_FLAG_MARK, PORT117_FN1), \
+	PINMUX_DATA(BBIF1_SS1_MARK, PORT117_FN2), \
+	PINMUX_DATA(BBIF1_FLOW_MARK, PORT117_FN3),
+	PINMUX_DATA(HSI_TX_FLAG_MARK, PORT118_FN1),
+	PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), \
+	PINMUX_DATA(PORT128_LCD2VSYN_MARK, PORT128_FN4, MSEL3CR_MSEL2_0), \
+	PINMUX_DATA(VIO2_VD_MARK, PORT128_FN6, MSEL4CR_MSEL27_0), \
+	PINMUX_DATA(LCD2D0_MARK, PORT128_FN7),
+
+	PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), \
+	PINMUX_DATA(PORT129_LCD2HSYN_MARK, PORT129_FN4), \
+	PINMUX_DATA(PORT129_LCD2CS__MARK, PORT129_FN5), \
+	PINMUX_DATA(VIO2_HD_MARK, PORT129_FN6, MSEL4CR_MSEL27_0), \
+	PINMUX_DATA(LCD2D1_MARK, PORT129_FN7),
+	PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), \
+	PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3, MSEL4CR_MSEL11_0,
+		MSEL4CR_MSEL10_1), \
+	PINMUX_DATA(LCD2D10_MARK, PORT130_FN7),
+	PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), \
+	PINMUX_DATA(PORT131_KEYOUT6_MARK, PORT131_FN2), \
+	PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), \
+	PINMUX_DATA(PORT131_KEYOUT11_MARK, PORT131_FN4), \
+	PINMUX_DATA(LCD2D11_MARK, PORT131_FN7),
+	PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), \
+	PINMUX_DATA(PORT132_KEYOUT7_MARK, PORT132_FN2), \
+	PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), \
+	PINMUX_DATA(PORT132_KEYOUT10_MARK, PORT132_FN4), \
+	PINMUX_DATA(LCD2D12_MARK, PORT132_FN7),
+	PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), \
+	PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT133_FN3, MSEL4CR_MSEL11_0), \
+	PINMUX_DATA(LCD2D13_MARK, PORT133_FN7),
+	PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), \
+	PINMUX_DATA(MSIOF2_TXD_MARK, PORT134_FN3, MSEL4CR_MSEL11_0), \
+	PINMUX_DATA(LCD2D14_MARK, PORT134_FN7),
+	PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), \
+	PINMUX_DATA(MSIOF2_TSCK_MARK, PORT135_FN3, MSEL4CR_MSEL11_0), \
+	PINMUX_DATA(LCD2D15_MARK, PORT135_FN7),
+	PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), \
+	PINMUX_DATA(PORT136_KEYOUT8_MARK, PORT136_FN2), \
+	PINMUX_DATA(LCD2D16_MARK, PORT136_FN7),
+	PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), \
+	PINMUX_DATA(PORT137_KEYOUT9_MARK, PORT137_FN2), \
+	PINMUX_DATA(LCD2D17_MARK, PORT137_FN7),
+	PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), \
+	PINMUX_DATA(PORT138_KEYOUT8_MARK, PORT138_FN2), \
+	PINMUX_DATA(VIO2_D0_MARK, PORT138_FN6), \
+	PINMUX_DATA(LCD2D6_MARK, PORT138_FN7),
+	PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), \
+	PINMUX_DATA(PORT139_KEYOUT9_MARK, PORT139_FN2), \
+	PINMUX_DATA(VIO2_D1_MARK, PORT139_FN6), \
+	PINMUX_DATA(LCD2D7_MARK, PORT139_FN7),
+	PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), \
+	PINMUX_DATA(TPU0TO2_MARK, PORT140_FN4), \
+	PINMUX_DATA(VIO2_D2_MARK, PORT140_FN6), \
+	PINMUX_DATA(LCD2D8_MARK, PORT140_FN7),
+	PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), \
+	PINMUX_DATA(TPU0TO3_MARK, PORT141_FN4), \
+	PINMUX_DATA(VIO2_D3_MARK, PORT141_FN6), \
+	PINMUX_DATA(LCD2D9_MARK, PORT141_FN7),
+	PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), \
+	PINMUX_DATA(PORT142_KEYOUT10_MARK, PORT142_FN2), \
+	PINMUX_DATA(VIO2_D4_MARK, PORT142_FN6), \
+	PINMUX_DATA(LCD2D2_MARK, PORT142_FN7),
+	PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), \
+	PINMUX_DATA(PORT143_KEYOUT11_MARK, PORT143_FN2), \
+	PINMUX_DATA(PORT143_KEYOUT6_MARK, PORT143_FN3), \
+	PINMUX_DATA(VIO2_D5_MARK, PORT143_FN6), \
+	PINMUX_DATA(LCD2D3_MARK, PORT143_FN7),
+	PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), \
+	PINMUX_DATA(PORT144_KEYOUT7_MARK, PORT144_FN2), \
+	PINMUX_DATA(VIO2_D6_MARK, PORT144_FN6), \
+	PINMUX_DATA(LCD2D4_MARK, PORT144_FN7),
+	PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), \
+	PINMUX_DATA(TPU1TO3_MARK, PORT145_FN3), \
+	PINMUX_DATA(PORT145_LCD2DISP_MARK, PORT145_FN4), \
+	PINMUX_DATA(PORT145_LCD2RS_MARK, PORT145_FN5), \
+	PINMUX_DATA(VIO2_D7_MARK, PORT145_FN6), \
+	PINMUX_DATA(LCD2D5_MARK, PORT145_FN7),
+	PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), \
+	PINMUX_DATA(LCD2DCK_MARK, PORT146_FN4), \
+	PINMUX_DATA(PORT146_LCD2WR__MARK, PORT146_FN5), \
+	PINMUX_DATA(VIO2_CLK_MARK, PORT146_FN6, MSEL4CR_MSEL27_0), \
+	PINMUX_DATA(LCD2D18_MARK, PORT146_FN7),
+	PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), \
+	PINMUX_DATA(LCD2RD__MARK, PORT147_FN4), \
+	PINMUX_DATA(VIO2_FIELD_MARK, PORT147_FN6, MSEL4CR_MSEL27_0), \
+	PINMUX_DATA(LCD2D19_MARK, PORT147_FN7),
+	PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
+	PINMUX_DATA(A27_MARK, PORT149_FN1), \
+	PINMUX_DATA(PORT149_RDWR_MARK, PORT149_FN2), \
+	PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), \
+	PINMUX_DATA(PORT149_KEYOUT9_MARK, PORT149_FN4),
+	PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN3),
+	PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN4), \
+	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN5),
+	PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN4), \
+	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN5),
+	PINMUX_DATA(TPU1TO2_MARK, PORT153_FN3), \
+	PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN4), \
+	PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN5),
+	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN5),
+	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN5),
+	PINMUX_DATA(SCIFA2_RTS1__MARK, PORT156_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN5),
+	PINMUX_DATA(SCIFA2_CTS1__MARK, PORT157_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN5, MSEL4CR_MSEL11_0,
+		MSEL4CR_MSEL10_0),
+	PINMUX_DATA(DINT__MARK, PORT158_FN1), \
+	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(TS_SCK3_MARK, PORT158_FN4),
+	PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2, MSEL4CR_MSEL21_1), \
+	PINMUX_DATA(NMI_MARK, PORT159_FN3),
+	PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2, MSEL4CR_MSEL21_1),
+	PINMUX_DATA(PORT161_SCIFB_CTS__MARK, PORT161_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT161_SCIFA5_CTS__MARK, PORT161_FN2, MSEL4CR_MSEL21_1),
+	PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2, MSEL4CR_MSEL21_1),
+	PINMUX_DATA(PORT163_SCIFB_RTS__MARK, PORT163_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT163_SCIFA5_RTS__MARK, PORT163_FN2, MSEL4CR_MSEL21_1), \
+	PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
+	PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
+	PINMUX_DATA(LCDD1_MARK, PORT193_FN1), \
+	PINMUX_DATA(PORT193_SCIFA5_CTS__MARK, PORT193_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1), \
+	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN5),
+	PINMUX_DATA(LCDD2_MARK, PORT194_FN1), \
+	PINMUX_DATA(PORT194_SCIFA5_RTS__MARK, PORT194_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1), \
+	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN5),
+	PINMUX_DATA(LCDD3_MARK, PORT195_FN1), \
+	PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1), \
+	PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN5),
+	PINMUX_DATA(LCDD4_MARK, PORT196_FN1), \
+	PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1),
+	PINMUX_DATA(LCDD5_MARK, PORT197_FN1), \
+	PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1), \
+	PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN5), \
+	PINMUX_DATA(TPU2TO1_MARK, PORT197_FN7),
+	PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
+	PINMUX_DATA(LCDD7_MARK, PORT199_FN1), \
+	PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), \
+	PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN5),
+	PINMUX_DATA(LCDD8_MARK, PORT200_FN1), \
+	PINMUX_DATA(D16_MARK, PORT200_FN6),
+	PINMUX_DATA(LCDD9_MARK, PORT201_FN1), \
+	PINMUX_DATA(D17_MARK, PORT201_FN6),
+	PINMUX_DATA(LCDD10_MARK, PORT202_FN1), \
+	PINMUX_DATA(D18_MARK, PORT202_FN6),
+	PINMUX_DATA(LCDD11_MARK, PORT203_FN1), \
+	PINMUX_DATA(D19_MARK, PORT203_FN6),
+	PINMUX_DATA(LCDD12_MARK, PORT204_FN1), \
+	PINMUX_DATA(D20_MARK, PORT204_FN6),
+	PINMUX_DATA(LCDD13_MARK, PORT205_FN1), \
+	PINMUX_DATA(D21_MARK, PORT205_FN6),
+	PINMUX_DATA(LCDD14_MARK, PORT206_FN1), \
+	PINMUX_DATA(D22_MARK, PORT206_FN6),
+	PINMUX_DATA(LCDD15_MARK, PORT207_FN1), \
+	PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D23_MARK, PORT207_FN6),
+	PINMUX_DATA(LCDD16_MARK, PORT208_FN1), \
+	PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D24_MARK, PORT208_FN6),
+	PINMUX_DATA(LCDD17_MARK, PORT209_FN1), \
+	PINMUX_DATA(D25_MARK, PORT209_FN6),
+	PINMUX_DATA(LCDD18_MARK, PORT210_FN1), \
+	PINMUX_DATA(DREQ2_MARK, PORT210_FN2), \
+	PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D26_MARK, PORT210_FN6),
+	PINMUX_DATA(LCDD19_MARK, PORT211_FN1), \
+	PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D27_MARK, PORT211_FN6),
+	PINMUX_DATA(LCDD20_MARK, PORT212_FN1), \
+	PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), \
+	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D28_MARK, PORT212_FN6),
+	PINMUX_DATA(LCDD21_MARK, PORT213_FN1), \
+	PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), \
+	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D29_MARK, PORT213_FN6),
+	PINMUX_DATA(LCDD22_MARK, PORT214_FN1), \
+	PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), \
+	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D30_MARK, PORT214_FN6),
+	PINMUX_DATA(LCDD23_MARK, PORT215_FN1), \
+	PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), \
+	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D31_MARK, PORT215_FN6),
+	PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), \
+	PINMUX_DATA(LCDWR__MARK, PORT216_FN2),
+	PINMUX_DATA(LCDRD__MARK, PORT217_FN1), \
+	PINMUX_DATA(DACK2_MARK, PORT217_FN2), \
+	PINMUX_DATA(PORT217_LCD2RS_MARK, PORT217_FN3), \
+	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(VIO2_FIELD3_MARK, PORT217_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_1), \
+	PINMUX_DATA(PORT217_LCD2DISP_MARK, PORT217_FN7),
+	PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), \
+	PINMUX_DATA(LCDCS__MARK, PORT218_FN2), \
+	PINMUX_DATA(LCDCS2__MARK, PORT218_FN3), \
+	PINMUX_DATA(DACK3_MARK, PORT218_FN4), \
+	PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
+	PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), \
+	PINMUX_DATA(LCDRS_MARK, PORT219_FN2), \
+	PINMUX_DATA(PORT219_LCD2WR__MARK, PORT219_FN3), \
+	PINMUX_DATA(DREQ3_MARK, PORT219_FN4), \
+	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(VIO2_CLK3_MARK, PORT219_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_1), \
+	PINMUX_DATA(LCD2DCK_2_MARK, PORT219_FN7),
+	PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), \
+	PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
+	PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), \
+	PINMUX_DATA(DREQ1_MARK, PORT221_FN2), \
+	PINMUX_DATA(PORT221_LCD2CS__MARK, PORT221_FN3), \
+	PINMUX_DATA(PWEN_MARK, PORT221_FN4), \
+	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(VIO2_HD3_MARK, PORT221_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_1), \
+	PINMUX_DATA(PORT221_LCD2HSYN_MARK, PORT221_FN7),
+	PINMUX_DATA(LCDDON_MARK, PORT222_FN1), \
+	PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), \
+	PINMUX_DATA(DACK1_MARK, PORT222_FN3), \
+	PINMUX_DATA(OVCN_MARK, PORT222_FN4), \
+	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(VIO2_VD3_MARK, PORT222_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_1), \
+	PINMUX_DATA(PORT222_LCD2VSYN_MARK, PORT222_FN7, MSEL3CR_MSEL2_1),
+
+	PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN2), \
+	PINMUX_DATA(OVCN2_MARK, PORT225_FN4),
+	PINMUX_DATA(EXTLP_MARK, PORT226_FN1), \
+	PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), \
+	PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN5),
+	PINMUX_DATA(SCIFA1_RTS__MARK, PORT227_FN2), \
+	PINMUX_DATA(IDIN_MARK, PORT227_FN4),
+	PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN2),
+	PINMUX_DATA(SCIFA1_CTS__MARK, PORT229_FN2), \
+	PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN3),
+	PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), \
+	PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2, MSEL3CR_MSEL9_1),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), \
+	PINMUX_DATA(SCIFA2_CTS2__MARK, PORT231_FN2, MSEL3CR_MSEL9_1),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), \
+	PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2, MSEL3CR_MSEL9_1),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), \
+	PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2, MSEL3CR_MSEL9_1),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), \
+	PINMUX_DATA(SCIFA2_RTS2__MARK, PORT234_FN2, MSEL3CR_MSEL9_1), \
+	PINMUX_DATA(VIO2_CLK2_MARK, PORT234_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_0), \
+	PINMUX_DATA(LCD2D20_MARK, PORT234_FN7),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), \
+	PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), \
+	PINMUX_DATA(VIO2_VD2_MARK, PORT235_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_0), \
+	PINMUX_DATA(LCD2D21_MARK, PORT235_FN7),
+	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), \
+	PINMUX_DATA(PORT236_I2C_SDA2_MARK, PORT236_FN2, MSEL2CR_MSEL17_0,
+		MSEL2CR_MSEL16_0),
+	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), \
+	PINMUX_DATA(PORT237_I2C_SCL2_MARK, PORT237_FN2, MSEL2CR_MSEL17_0,
+		MSEL2CR_MSEL16_0),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), \
+	PINMUX_DATA(VIO2_FIELD2_MARK, PORT238_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_0), \
+	PINMUX_DATA(LCD2D22_MARK, PORT238_FN7),
+	PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), \
+	PINMUX_DATA(VIO2_HD2_MARK, PORT239_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_0), \
+	PINMUX_DATA(LCD2D23_MARK, PORT239_FN7),
+	PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
+	PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1, MSEL4CR_MSEL19_0), \
+	PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), \
+	PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), \
+	PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
+	PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1, MSEL4CR_MSEL19_0), \
+	PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN3),
+	PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1, MSEL4CR_MSEL19_0), \
+	PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
+	PINMUX_DATA(PORT244_SCIFA5_CTS__MARK, PORT244_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), \
+	PINMUX_DATA(PORT244_SCIFB_CTS__MARK, PORT244_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(MSIOF2R_RXD_MARK, PORT244_FN7, MSEL4CR_MSEL11_1),
+	PINMUX_DATA(PORT245_SCIFA5_RTS__MARK, PORT245_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), \
+	PINMUX_DATA(PORT245_SCIFB_RTS__MARK, PORT245_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(MSIOF2R_TXD_MARK, PORT245_FN7, MSEL4CR_MSEL11_1),
+	PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), \
+	PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
+	PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), \
+	PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
+	PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), \
+	PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), \
+	PINMUX_DATA(PORT248_I2C_SCL3_MARK, PORT248_FN5, MSEL2CR_MSEL19_0,
+		MSEL2CR_MSEL18_0), \
+	PINMUX_DATA(MSIOF2R_TSCK_MARK, PORT248_FN7, MSEL4CR_MSEL11_1),
+	PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), \
+	PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), \
+	PINMUX_DATA(PORT249_I2C_SDA3_MARK, PORT249_FN5, MSEL2CR_MSEL19_0,
+		MSEL2CR_MSEL18_0), \
+	PINMUX_DATA(MSIOF2R_TSYNC_MARK, PORT249_FN7, MSEL4CR_MSEL11_1),
+	PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
+	PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
+	PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
+	PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
+	PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
+	PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
+	PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
+	PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
+	PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
+	PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), \
+	PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
+	PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), \
+	PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
+	PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), \
+	PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
+	PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), \
+	PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
+	PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
+	PINMUX_DATA(SDHICLK2_MARK, PORT264_FN1),
+	PINMUX_DATA(SDHID2_0_MARK, PORT265_FN1), \
+	PINMUX_DATA(TS_SPSYNC4_MARK, PORT265_FN3),
+	PINMUX_DATA(SDHID2_1_MARK, PORT266_FN1), \
+	PINMUX_DATA(TS_SDAT4_MARK, PORT266_FN3),
+	PINMUX_DATA(SDHID2_2_MARK, PORT267_FN1), \
+	PINMUX_DATA(TS_SDEN4_MARK, PORT267_FN3),
+	PINMUX_DATA(SDHID2_3_MARK, PORT268_FN1), \
+	PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
+	PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
+	PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU,
+		MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
+	PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU,
+		MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
+	PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU,
+		MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
+	PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU,
+		MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
+	PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
+	PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
+	PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
+	PINMUX_DATA(MCP_CKO_MARK, PORT289_FN1), \
+	PINMUX_DATA(MMCCLK1_MARK, PORT289_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D15_MCP_NAF15_MARK, PORT290_FN1),
+	PINMUX_DATA(MCP_D14_MCP_NAF14_MARK, PORT291_FN1),
+	PINMUX_DATA(MCP_D13_MCP_NAF13_MARK, PORT292_FN1),
+	PINMUX_DATA(MCP_D12_MCP_NAF12_MARK, PORT293_FN1),
+	PINMUX_DATA(MCP_D11_MCP_NAF11_MARK, PORT294_FN1),
+	PINMUX_DATA(MCP_D10_MCP_NAF10_MARK, PORT295_FN1),
+	PINMUX_DATA(MCP_D9_MCP_NAF9_MARK, PORT296_FN1),
+	PINMUX_DATA(MCP_D8_MCP_NAF8_MARK, PORT297_FN1), \
+	PINMUX_DATA(MMCCMD1_MARK, PORT297_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D7_MCP_NAF7_MARK, PORT298_FN1), \
+	PINMUX_DATA(MMCD1_7_MARK, PORT298_FN2, MSEL4CR_MSEL15_1),
+
+	PINMUX_DATA(MCP_D6_MCP_NAF6_MARK, PORT299_FN1), \
+	PINMUX_DATA(MMCD1_6_MARK, PORT299_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D5_MCP_NAF5_MARK, PORT300_FN1), \
+	PINMUX_DATA(MMCD1_5_MARK, PORT300_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D4_MCP_NAF4_MARK, PORT301_FN1), \
+	PINMUX_DATA(MMCD1_4_MARK, PORT301_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D3_MCP_NAF3_MARK, PORT302_FN1), \
+	PINMUX_DATA(MMCD1_3_MARK, PORT302_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D2_MCP_NAF2_MARK, PORT303_FN1), \
+	PINMUX_DATA(MMCD1_2_MARK, PORT303_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D1_MCP_NAF1_MARK, PORT304_FN1), \
+	PINMUX_DATA(MMCD1_1_MARK, PORT304_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D0_MCP_NAF0_MARK, PORT305_FN1), \
+	PINMUX_DATA(MMCD1_0_MARK, PORT305_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_NBRSTOUT__MARK, PORT306_FN1),
+	PINMUX_DATA(MCP_WE0__MCP_FWE_MARK, PORT309_FN1), \
+	PINMUX_DATA(MCP_RDWR_MCP_FWE_MARK, PORT309_FN2),
+
+	/* MSEL2 special cases */
+	PINMUX_DATA(TSIF2_TS_XX1_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
+		MSEL2CR_MSEL12_0),
+	PINMUX_DATA(TSIF2_TS_XX2_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
+		MSEL2CR_MSEL12_1),
+	PINMUX_DATA(TSIF2_TS_XX3_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
+		MSEL2CR_MSEL12_0),
+	PINMUX_DATA(TSIF2_TS_XX4_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
+		MSEL2CR_MSEL12_1),
+	PINMUX_DATA(TSIF2_TS_XX5_MARK, MSEL2CR_MSEL14_1, MSEL2CR_MSEL13_0,
+		MSEL2CR_MSEL12_0),
+	PINMUX_DATA(TSIF1_TS_XX1_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
+		MSEL2CR_MSEL9_0),
+	PINMUX_DATA(TSIF1_TS_XX2_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
+		MSEL2CR_MSEL9_1),
+	PINMUX_DATA(TSIF1_TS_XX3_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
+		MSEL2CR_MSEL9_0),
+	PINMUX_DATA(TSIF1_TS_XX4_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
+		MSEL2CR_MSEL9_1),
+	PINMUX_DATA(TSIF1_TS_XX5_MARK, MSEL2CR_MSEL11_1, MSEL2CR_MSEL10_0,
+		MSEL2CR_MSEL9_0),
+	PINMUX_DATA(TSIF0_TS_XX1_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
+		MSEL2CR_MSEL6_0),
+	PINMUX_DATA(TSIF0_TS_XX2_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
+		MSEL2CR_MSEL6_1),
+	PINMUX_DATA(TSIF0_TS_XX3_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
+		MSEL2CR_MSEL6_0),
+	PINMUX_DATA(TSIF0_TS_XX4_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
+		MSEL2CR_MSEL6_1),
+	PINMUX_DATA(TSIF0_TS_XX5_MARK, MSEL2CR_MSEL8_1, MSEL2CR_MSEL7_0,
+		MSEL2CR_MSEL6_0),
+	PINMUX_DATA(MST1_TS_XX1_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
+		MSEL2CR_MSEL3_0),
+	PINMUX_DATA(MST1_TS_XX2_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
+		MSEL2CR_MSEL3_1),
+	PINMUX_DATA(MST1_TS_XX3_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
+		MSEL2CR_MSEL3_0),
+	PINMUX_DATA(MST1_TS_XX4_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
+		MSEL2CR_MSEL3_1),
+	PINMUX_DATA(MST1_TS_XX5_MARK, MSEL2CR_MSEL5_1, MSEL2CR_MSEL4_0,
+		MSEL2CR_MSEL3_0),
+	PINMUX_DATA(MST0_TS_XX1_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
+		MSEL2CR_MSEL0_0),
+	PINMUX_DATA(MST0_TS_XX2_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
+		MSEL2CR_MSEL0_1),
+	PINMUX_DATA(MST0_TS_XX3_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
+		MSEL2CR_MSEL0_0),
+	PINMUX_DATA(MST0_TS_XX4_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
+		MSEL2CR_MSEL0_1),
+	PINMUX_DATA(MST0_TS_XX5_MARK, MSEL2CR_MSEL2_1, MSEL2CR_MSEL1_0,
+		MSEL2CR_MSEL0_0),
+
+	/* MSEL3 special cases */
+	PINMUX_DATA(SDHI0_VCCQ_MC0_ON_MARK, MSEL3CR_MSEL28_1),
+	PINMUX_DATA(SDHI0_VCCQ_MC0_OFF_MARK, MSEL3CR_MSEL28_0),
+	PINMUX_DATA(DEBUG_MON_VIO_MARK, MSEL3CR_MSEL15_0),
+	PINMUX_DATA(DEBUG_MON_LCDD_MARK, MSEL3CR_MSEL15_1),
+	PINMUX_DATA(LCDC_LCDC0_MARK, MSEL3CR_MSEL6_0),
+	PINMUX_DATA(LCDC_LCDC1_MARK, MSEL3CR_MSEL6_1),
+
+	/* MSEL4 special cases */
+	PINMUX_DATA(IRQ9_MEM_INT_MARK, MSEL4CR_MSEL29_0),
+	PINMUX_DATA(IRQ9_MCP_INT_MARK, MSEL4CR_MSEL29_1),
+	PINMUX_DATA(A11_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_0),
+	PINMUX_DATA(KEYOUT8_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_1),
+	PINMUX_DATA(TPU4TO3_MARK, MSEL4CR_MSEL13_1, MSEL4CR_MSEL12_0),
+	PINMUX_DATA(RESETA_N_PU_ON_MARK, MSEL4CR_MSEL4_0),
+	PINMUX_DATA(RESETA_N_PU_OFF_MARK, MSEL4CR_MSEL4_1),
+	PINMUX_DATA(EDBGREQ_PD_MARK, MSEL4CR_MSEL1_0),
+	PINMUX_DATA(EDBGREQ_PU_MARK, MSEL4CR_MSEL1_1),
+
+	/* Functions with pull-ups */
+	PINMUX_DATA(KEYIN0_PU_MARK, PORT66_FN2, PORT66_IN_PU),
+	PINMUX_DATA(KEYIN1_PU_MARK, PORT67_FN2, PORT67_IN_PU),
+	PINMUX_DATA(KEYIN2_PU_MARK, PORT68_FN2, PORT68_IN_PU),
+	PINMUX_DATA(KEYIN3_PU_MARK, PORT69_FN2, PORT69_IN_PU),
+	PINMUX_DATA(KEYIN4_PU_MARK, PORT70_FN2, PORT70_IN_PU),
+	PINMUX_DATA(KEYIN5_PU_MARK, PORT71_FN2, PORT71_IN_PU),
+	PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
+	PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
+
+	PINMUX_DATA(SDHICD0_PU_MARK,  PORT251_FN1, PORT251_IN_PU),
+	PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU),
+	PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU),
+	PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU),
+	PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU),
+	PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU),
+	PINMUX_DATA(SDHIWP0_PU_MARK,  PORT257_FN1, PORT256_IN_PU),
+	PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU),
+	PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU),
+	PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU),
+	PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU),
+	PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU),
+	PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU),
+	PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU),
+	PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU),
+	PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU),
+	PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU),
+
+	PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
+		MSEL4CR_MSEL15_1),
+
+	PINMUX_DATA(MMCD0_0_PU_MARK,
+		    PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_1_PU_MARK,
+		    PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_2_PU_MARK,
+		    PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_3_PU_MARK,
+		    PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_4_PU_MARK,
+		    PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_5_PU_MARK,
+		    PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_6_PU_MARK,
+		    PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_7_PU_MARK,
+		    PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
+	PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
+	PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
+	PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
+	PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
+	PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	GPIO_PORT_ALL(),
+
+	/* Table 25-1 (Functions 0-7) */
+	GPIO_FN(VBUS_0),
+	GPIO_FN(GPI0),
+	GPIO_FN(GPI1),
+	GPIO_FN(GPI2),
+	GPIO_FN(GPI3),
+	GPIO_FN(GPI4),
+	GPIO_FN(GPI5),
+	GPIO_FN(GPI6),
+	GPIO_FN(GPI7),
+	GPIO_FN(SCIFA7_RXD),
+	GPIO_FN(SCIFA7_CTS_),
+	GPIO_FN(GPO7), \
+	GPIO_FN(MFG0_OUT2),
+	GPIO_FN(GPO6), \
+	GPIO_FN(MFG1_OUT2),
+	GPIO_FN(GPO5), \
+	GPIO_FN(SCIFA0_SCK), \
+	GPIO_FN(FSICOSLDT3), \
+	GPIO_FN(PORT16_VIO_CKOR),
+	GPIO_FN(SCIFA0_TXD),
+	GPIO_FN(SCIFA7_TXD),
+	GPIO_FN(SCIFA7_RTS_), \
+	GPIO_FN(PORT19_VIO_CKO2),
+	GPIO_FN(GPO0),
+	GPIO_FN(GPO1),
+	GPIO_FN(GPO2), \
+	GPIO_FN(STATUS0),
+	GPIO_FN(GPO3), \
+	GPIO_FN(STATUS1),
+	GPIO_FN(GPO4), \
+	GPIO_FN(STATUS2),
+	GPIO_FN(VINT),
+	GPIO_FN(TCKON),
+	GPIO_FN(XDVFS1), \
+	GPIO_FN(PORT27_I2C_SCL2), \
+	GPIO_FN(PORT27_I2C_SCL3), \
+	GPIO_FN(MFG0_OUT1), \
+	GPIO_FN(PORT27_IROUT),
+	GPIO_FN(XDVFS2), \
+	GPIO_FN(PORT28_I2C_SDA2), \
+	GPIO_FN(PORT28_I2C_SDA3), \
+	GPIO_FN(PORT28_TPU1TO1),
+	GPIO_FN(SIM_RST), \
+	GPIO_FN(PORT29_TPU1TO1),
+	GPIO_FN(SIM_CLK), \
+	GPIO_FN(PORT30_VIO_CKOR),
+	GPIO_FN(SIM_D), \
+	GPIO_FN(PORT31_IROUT),
+	GPIO_FN(SCIFA4_TXD),
+	GPIO_FN(SCIFA4_RXD), \
+	GPIO_FN(XWUP),
+	GPIO_FN(SCIFA4_RTS_),
+	GPIO_FN(SCIFA4_CTS_),
+	GPIO_FN(FSIBOBT), \
+	GPIO_FN(FSIBIBT),
+	GPIO_FN(FSIBOLR), \
+	GPIO_FN(FSIBILR),
+	GPIO_FN(FSIBOSLD),
+	GPIO_FN(FSIBISLD),
+	GPIO_FN(VACK),
+	GPIO_FN(XTAL1L),
+	GPIO_FN(SCIFA0_RTS_), \
+	GPIO_FN(FSICOSLDT2),
+	GPIO_FN(SCIFA0_RXD),
+	GPIO_FN(SCIFA0_CTS_), \
+	GPIO_FN(FSICOSLDT1),
+	GPIO_FN(FSICOBT), \
+	GPIO_FN(FSICIBT), \
+	GPIO_FN(FSIDOBT), \
+	GPIO_FN(FSIDIBT),
+	GPIO_FN(FSICOLR), \
+	GPIO_FN(FSICILR), \
+	GPIO_FN(FSIDOLR), \
+	GPIO_FN(FSIDILR),
+	GPIO_FN(FSICOSLD), \
+	GPIO_FN(PORT47_FSICSPDIF),
+	GPIO_FN(FSICISLD), \
+	GPIO_FN(FSIDISLD),
+	GPIO_FN(FSIACK), \
+	GPIO_FN(PORT49_IRDA_OUT), \
+	GPIO_FN(PORT49_IROUT), \
+	GPIO_FN(FSIAOMC),
+	GPIO_FN(FSIAOLR), \
+	GPIO_FN(BBIF2_TSYNC2), \
+	GPIO_FN(TPU2TO2), \
+	GPIO_FN(FSIAILR),
+
+	GPIO_FN(FSIAOBT), \
+	GPIO_FN(BBIF2_TSCK2), \
+	GPIO_FN(TPU2TO3), \
+	GPIO_FN(FSIAIBT),
+	GPIO_FN(FSIAOSLD), \
+	GPIO_FN(BBIF2_TXD2),
+	GPIO_FN(FSIASPDIF), \
+	GPIO_FN(PORT53_IRDA_IN), \
+	GPIO_FN(TPU3TO3), \
+	GPIO_FN(FSIBSPDIF), \
+	GPIO_FN(PORT53_FSICSPDIF),
+	GPIO_FN(FSIBCK), \
+	GPIO_FN(PORT54_IRDA_FIRSEL), \
+	GPIO_FN(TPU3TO2), \
+	GPIO_FN(FSIBOMC), \
+	GPIO_FN(FSICCK), \
+	GPIO_FN(FSICOMC),
+	GPIO_FN(FSIAISLD), \
+	GPIO_FN(TPU0TO0),
+	GPIO_FN(A0), \
+	GPIO_FN(BS_),
+	GPIO_FN(A12), \
+	GPIO_FN(PORT58_KEYOUT7), \
+	GPIO_FN(TPU4TO2),
+	GPIO_FN(A13), \
+	GPIO_FN(PORT59_KEYOUT6), \
+	GPIO_FN(TPU0TO1),
+	GPIO_FN(A14), \
+	GPIO_FN(KEYOUT5),
+	GPIO_FN(A15), \
+	GPIO_FN(KEYOUT4),
+	GPIO_FN(A16), \
+	GPIO_FN(KEYOUT3), \
+	GPIO_FN(MSIOF0_SS1),
+	GPIO_FN(A17), \
+	GPIO_FN(KEYOUT2), \
+	GPIO_FN(MSIOF0_TSYNC),
+	GPIO_FN(A18), \
+	GPIO_FN(KEYOUT1), \
+	GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(A19), \
+	GPIO_FN(KEYOUT0), \
+	GPIO_FN(MSIOF0_TXD),
+	GPIO_FN(A20), \
+	GPIO_FN(KEYIN0), \
+	GPIO_FN(MSIOF0_RSCK),
+	GPIO_FN(A21), \
+	GPIO_FN(KEYIN1), \
+	GPIO_FN(MSIOF0_RSYNC),
+	GPIO_FN(A22), \
+	GPIO_FN(KEYIN2), \
+	GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(A23), \
+	GPIO_FN(KEYIN3), \
+	GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(A24), \
+	GPIO_FN(KEYIN4), \
+	GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(A25), \
+	GPIO_FN(KEYIN5), \
+	GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(A26), \
+	GPIO_FN(KEYIN6),
+	GPIO_FN(KEYIN7),
+	GPIO_FN(D0_NAF0),
+	GPIO_FN(D1_NAF1),
+	GPIO_FN(D2_NAF2),
+	GPIO_FN(D3_NAF3),
+	GPIO_FN(D4_NAF4),
+	GPIO_FN(D5_NAF5),
+	GPIO_FN(D6_NAF6),
+	GPIO_FN(D7_NAF7),
+	GPIO_FN(D8_NAF8),
+	GPIO_FN(D9_NAF9),
+	GPIO_FN(D10_NAF10),
+	GPIO_FN(D11_NAF11),
+	GPIO_FN(D12_NAF12),
+	GPIO_FN(D13_NAF13),
+	GPIO_FN(D14_NAF14),
+	GPIO_FN(D15_NAF15),
+	GPIO_FN(CS4_),
+	GPIO_FN(CS5A_), \
+	GPIO_FN(PORT91_RDWR),
+	GPIO_FN(CS5B_), \
+	GPIO_FN(FCE1_),
+	GPIO_FN(CS6B_), \
+	GPIO_FN(DACK0),
+	GPIO_FN(FCE0_), \
+	GPIO_FN(CS6A_),
+	GPIO_FN(WAIT_), \
+	GPIO_FN(DREQ0),
+	GPIO_FN(RD__FSC),
+	GPIO_FN(WE0__FWE), \
+	GPIO_FN(RDWR_FWE),
+	GPIO_FN(WE1_),
+	GPIO_FN(FRB),
+	GPIO_FN(CKO),
+	GPIO_FN(NBRSTOUT_),
+	GPIO_FN(NBRST_),
+	GPIO_FN(BBIF2_TXD),
+	GPIO_FN(BBIF2_RXD),
+	GPIO_FN(BBIF2_SYNC),
+	GPIO_FN(BBIF2_SCK),
+	GPIO_FN(SCIFA3_CTS_), \
+	GPIO_FN(MFG3_IN2),
+	GPIO_FN(SCIFA3_RXD), \
+	GPIO_FN(MFG3_IN1),
+	GPIO_FN(BBIF1_SS2), \
+	GPIO_FN(SCIFA3_RTS_), \
+	GPIO_FN(MFG3_OUT1),
+	GPIO_FN(SCIFA3_TXD),
+	GPIO_FN(HSI_RX_DATA), \
+	GPIO_FN(BBIF1_RXD),
+	GPIO_FN(HSI_TX_WAKE), \
+	GPIO_FN(BBIF1_TSCK),
+	GPIO_FN(HSI_TX_DATA), \
+	GPIO_FN(BBIF1_TSYNC),
+	GPIO_FN(HSI_TX_READY), \
+	GPIO_FN(BBIF1_TXD),
+	GPIO_FN(HSI_RX_READY), \
+	GPIO_FN(BBIF1_RSCK), \
+	GPIO_FN(PORT115_I2C_SCL2), \
+	GPIO_FN(PORT115_I2C_SCL3),
+	GPIO_FN(HSI_RX_WAKE), \
+	GPIO_FN(BBIF1_RSYNC), \
+	GPIO_FN(PORT116_I2C_SDA2), \
+	GPIO_FN(PORT116_I2C_SDA3),
+	GPIO_FN(HSI_RX_FLAG), \
+	GPIO_FN(BBIF1_SS1), \
+	GPIO_FN(BBIF1_FLOW),
+	GPIO_FN(HSI_TX_FLAG),
+	GPIO_FN(VIO_VD), \
+	GPIO_FN(PORT128_LCD2VSYN), \
+	GPIO_FN(VIO2_VD), \
+	GPIO_FN(LCD2D0),
+
+	GPIO_FN(VIO_HD), \
+	GPIO_FN(PORT129_LCD2HSYN), \
+	GPIO_FN(PORT129_LCD2CS_), \
+	GPIO_FN(VIO2_HD), \
+	GPIO_FN(LCD2D1),
+	GPIO_FN(VIO_D0), \
+	GPIO_FN(PORT130_MSIOF2_RXD), \
+	GPIO_FN(LCD2D10),
+	GPIO_FN(VIO_D1), \
+	GPIO_FN(PORT131_KEYOUT6), \
+	GPIO_FN(PORT131_MSIOF2_SS1), \
+	GPIO_FN(PORT131_KEYOUT11), \
+	GPIO_FN(LCD2D11),
+	GPIO_FN(VIO_D2), \
+	GPIO_FN(PORT132_KEYOUT7), \
+	GPIO_FN(PORT132_MSIOF2_SS2), \
+	GPIO_FN(PORT132_KEYOUT10), \
+	GPIO_FN(LCD2D12),
+	GPIO_FN(VIO_D3), \
+	GPIO_FN(MSIOF2_TSYNC), \
+	GPIO_FN(LCD2D13),
+	GPIO_FN(VIO_D4), \
+	GPIO_FN(MSIOF2_TXD), \
+	GPIO_FN(LCD2D14),
+	GPIO_FN(VIO_D5), \
+	GPIO_FN(MSIOF2_TSCK), \
+	GPIO_FN(LCD2D15),
+	GPIO_FN(VIO_D6), \
+	GPIO_FN(PORT136_KEYOUT8), \
+	GPIO_FN(LCD2D16),
+	GPIO_FN(VIO_D7), \
+	GPIO_FN(PORT137_KEYOUT9), \
+	GPIO_FN(LCD2D17),
+	GPIO_FN(VIO_D8), \
+	GPIO_FN(PORT138_KEYOUT8), \
+	GPIO_FN(VIO2_D0), \
+	GPIO_FN(LCD2D6),
+	GPIO_FN(VIO_D9), \
+	GPIO_FN(PORT139_KEYOUT9), \
+	GPIO_FN(VIO2_D1), \
+	GPIO_FN(LCD2D7),
+	GPIO_FN(VIO_D10), \
+	GPIO_FN(TPU0TO2), \
+	GPIO_FN(VIO2_D2), \
+	GPIO_FN(LCD2D8),
+	GPIO_FN(VIO_D11), \
+	GPIO_FN(TPU0TO3), \
+	GPIO_FN(VIO2_D3), \
+	GPIO_FN(LCD2D9),
+	GPIO_FN(VIO_D12), \
+	GPIO_FN(PORT142_KEYOUT10), \
+	GPIO_FN(VIO2_D4), \
+	GPIO_FN(LCD2D2),
+	GPIO_FN(VIO_D13), \
+	GPIO_FN(PORT143_KEYOUT11), \
+	GPIO_FN(PORT143_KEYOUT6), \
+	GPIO_FN(VIO2_D5), \
+	GPIO_FN(LCD2D3),
+	GPIO_FN(VIO_D14), \
+	GPIO_FN(PORT144_KEYOUT7), \
+	GPIO_FN(VIO2_D6), \
+	GPIO_FN(LCD2D4),
+	GPIO_FN(VIO_D15), \
+	GPIO_FN(TPU1TO3), \
+	GPIO_FN(PORT145_LCD2DISP), \
+	GPIO_FN(PORT145_LCD2RS), \
+	GPIO_FN(VIO2_D7), \
+	GPIO_FN(LCD2D5),
+	GPIO_FN(VIO_CLK), \
+	GPIO_FN(LCD2DCK), \
+	GPIO_FN(PORT146_LCD2WR_), \
+	GPIO_FN(VIO2_CLK), \
+	GPIO_FN(LCD2D18),
+	GPIO_FN(VIO_FIELD), \
+	GPIO_FN(LCD2RD_), \
+	GPIO_FN(VIO2_FIELD), \
+	GPIO_FN(LCD2D19),
+	GPIO_FN(VIO_CKO),
+	GPIO_FN(A27), \
+	GPIO_FN(PORT149_RDWR), \
+	GPIO_FN(MFG0_IN1), \
+	GPIO_FN(PORT149_KEYOUT9),
+	GPIO_FN(MFG0_IN2),
+	GPIO_FN(TS_SPSYNC3), \
+	GPIO_FN(MSIOF2_RSCK),
+	GPIO_FN(TS_SDAT3), \
+	GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(TPU1TO2), \
+	GPIO_FN(TS_SDEN3), \
+	GPIO_FN(PORT153_MSIOF2_SS1),
+	GPIO_FN(SCIFA2_TXD1), \
+	GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(SCIFA2_RXD1), \
+	GPIO_FN(MSIOF2_MCK1),
+	GPIO_FN(SCIFA2_RTS1_), \
+	GPIO_FN(PORT156_MSIOF2_SS2),
+	GPIO_FN(SCIFA2_CTS1_), \
+	GPIO_FN(PORT157_MSIOF2_RXD),
+	GPIO_FN(DINT_), \
+	GPIO_FN(SCIFA2_SCK1), \
+	GPIO_FN(TS_SCK3),
+	GPIO_FN(PORT159_SCIFB_SCK), \
+	GPIO_FN(PORT159_SCIFA5_SCK), \
+	GPIO_FN(NMI),
+	GPIO_FN(PORT160_SCIFB_TXD), \
+	GPIO_FN(PORT160_SCIFA5_TXD),
+	GPIO_FN(PORT161_SCIFB_CTS_), \
+	GPIO_FN(PORT161_SCIFA5_CTS_),
+	GPIO_FN(PORT162_SCIFB_RXD), \
+	GPIO_FN(PORT162_SCIFA5_RXD),
+	GPIO_FN(PORT163_SCIFB_RTS_), \
+	GPIO_FN(PORT163_SCIFA5_RTS_), \
+	GPIO_FN(TPU3TO0),
+	GPIO_FN(LCDD0),
+	GPIO_FN(LCDD1), \
+	GPIO_FN(PORT193_SCIFA5_CTS_), \
+	GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(LCDD2), \
+	GPIO_FN(PORT194_SCIFA5_RTS_), \
+	GPIO_FN(BBIF2_TSCK1),
+	GPIO_FN(LCDD3), \
+	GPIO_FN(PORT195_SCIFA5_RXD), \
+	GPIO_FN(BBIF2_TXD1),
+	GPIO_FN(LCDD4), \
+	GPIO_FN(PORT196_SCIFA5_TXD),
+	GPIO_FN(LCDD5), \
+	GPIO_FN(PORT197_SCIFA5_SCK), \
+	GPIO_FN(MFG2_OUT2), \
+	GPIO_FN(TPU2TO1),
+	GPIO_FN(LCDD6),
+	GPIO_FN(LCDD7), \
+	GPIO_FN(TPU4TO1), \
+	GPIO_FN(MFG4_OUT2),
+	GPIO_FN(LCDD8), \
+	GPIO_FN(D16),
+	GPIO_FN(LCDD9), \
+	GPIO_FN(D17),
+	GPIO_FN(LCDD10), \
+	GPIO_FN(D18),
+	GPIO_FN(LCDD11), \
+	GPIO_FN(D19),
+	GPIO_FN(LCDD12), \
+	GPIO_FN(D20),
+	GPIO_FN(LCDD13), \
+	GPIO_FN(D21),
+	GPIO_FN(LCDD14), \
+	GPIO_FN(D22),
+	GPIO_FN(LCDD15), \
+	GPIO_FN(PORT207_MSIOF0L_SS1), \
+	GPIO_FN(D23),
+	GPIO_FN(LCDD16), \
+	GPIO_FN(PORT208_MSIOF0L_SS2), \
+	GPIO_FN(D24),
+	GPIO_FN(LCDD17), \
+	GPIO_FN(D25),
+	GPIO_FN(LCDD18), \
+	GPIO_FN(DREQ2), \
+	GPIO_FN(PORT210_MSIOF0L_SS1), \
+	GPIO_FN(D26),
+	GPIO_FN(LCDD19), \
+	GPIO_FN(PORT211_MSIOF0L_SS2), \
+	GPIO_FN(D27),
+	GPIO_FN(LCDD20), \
+	GPIO_FN(TS_SPSYNC1), \
+	GPIO_FN(MSIOF0L_MCK0), \
+	GPIO_FN(D28),
+	GPIO_FN(LCDD21), \
+	GPIO_FN(TS_SDAT1), \
+	GPIO_FN(MSIOF0L_MCK1), \
+	GPIO_FN(D29),
+	GPIO_FN(LCDD22), \
+	GPIO_FN(TS_SDEN1), \
+	GPIO_FN(MSIOF0L_RSCK), \
+	GPIO_FN(D30),
+	GPIO_FN(LCDD23), \
+	GPIO_FN(TS_SCK1), \
+	GPIO_FN(MSIOF0L_RSYNC), \
+	GPIO_FN(D31),
+	GPIO_FN(LCDDCK), \
+	GPIO_FN(LCDWR_),
+	GPIO_FN(LCDRD_), \
+	GPIO_FN(DACK2), \
+	GPIO_FN(PORT217_LCD2RS), \
+	GPIO_FN(MSIOF0L_TSYNC), \
+	GPIO_FN(VIO2_FIELD3), \
+	GPIO_FN(PORT217_LCD2DISP),
+	GPIO_FN(LCDHSYN), \
+	GPIO_FN(LCDCS_), \
+	GPIO_FN(LCDCS2_), \
+	GPIO_FN(DACK3), \
+	GPIO_FN(PORT218_VIO_CKOR),
+	GPIO_FN(LCDDISP), \
+	GPIO_FN(LCDRS), \
+	GPIO_FN(PORT219_LCD2WR_), \
+	GPIO_FN(DREQ3), \
+	GPIO_FN(MSIOF0L_TSCK), \
+	GPIO_FN(VIO2_CLK3), \
+	GPIO_FN(LCD2DCK_2),
+	GPIO_FN(LCDVSYN), \
+	GPIO_FN(LCDVSYN2),
+	GPIO_FN(LCDLCLK), \
+	GPIO_FN(DREQ1), \
+	GPIO_FN(PORT221_LCD2CS_), \
+	GPIO_FN(PWEN), \
+	GPIO_FN(MSIOF0L_RXD), \
+	GPIO_FN(VIO2_HD3), \
+	GPIO_FN(PORT221_LCD2HSYN),
+	GPIO_FN(LCDDON), \
+	GPIO_FN(LCDDON2), \
+	GPIO_FN(DACK1), \
+	GPIO_FN(OVCN), \
+	GPIO_FN(MSIOF0L_TXD), \
+	GPIO_FN(VIO2_VD3), \
+	GPIO_FN(PORT222_LCD2VSYN),
+
+	GPIO_FN(SCIFA1_TXD), \
+	GPIO_FN(OVCN2),
+	GPIO_FN(EXTLP), \
+	GPIO_FN(SCIFA1_SCK), \
+	GPIO_FN(PORT226_VIO_CKO2),
+	GPIO_FN(SCIFA1_RTS_), \
+	GPIO_FN(IDIN),
+	GPIO_FN(SCIFA1_RXD),
+	GPIO_FN(SCIFA1_CTS_), \
+	GPIO_FN(MFG1_IN1),
+	GPIO_FN(MSIOF1_TXD), \
+	GPIO_FN(SCIFA2_TXD2),
+	GPIO_FN(MSIOF1_TSYNC), \
+	GPIO_FN(SCIFA2_CTS2_),
+	GPIO_FN(MSIOF1_TSCK), \
+	GPIO_FN(SCIFA2_SCK2),
+	GPIO_FN(MSIOF1_RXD), \
+	GPIO_FN(SCIFA2_RXD2),
+	GPIO_FN(MSIOF1_RSCK), \
+	GPIO_FN(SCIFA2_RTS2_), \
+	GPIO_FN(VIO2_CLK2), \
+	GPIO_FN(LCD2D20),
+	GPIO_FN(MSIOF1_RSYNC), \
+	GPIO_FN(MFG1_IN2), \
+	GPIO_FN(VIO2_VD2), \
+	GPIO_FN(LCD2D21),
+	GPIO_FN(MSIOF1_MCK0), \
+	GPIO_FN(PORT236_I2C_SDA2),
+	GPIO_FN(MSIOF1_MCK1), \
+	GPIO_FN(PORT237_I2C_SCL2),
+	GPIO_FN(MSIOF1_SS1), \
+	GPIO_FN(VIO2_FIELD2), \
+	GPIO_FN(LCD2D22),
+	GPIO_FN(MSIOF1_SS2), \
+	GPIO_FN(VIO2_HD2), \
+	GPIO_FN(LCD2D23),
+	GPIO_FN(SCIFA6_TXD),
+	GPIO_FN(PORT241_IRDA_OUT), \
+	GPIO_FN(PORT241_IROUT), \
+	GPIO_FN(MFG4_OUT1), \
+	GPIO_FN(TPU4TO0),
+	GPIO_FN(PORT242_IRDA_IN), \
+	GPIO_FN(MFG4_IN2),
+	GPIO_FN(PORT243_IRDA_FIRSEL), \
+	GPIO_FN(PORT243_VIO_CKO2),
+	GPIO_FN(PORT244_SCIFA5_CTS_), \
+	GPIO_FN(MFG2_IN1), \
+	GPIO_FN(PORT244_SCIFB_CTS_), \
+	GPIO_FN(MSIOF2R_RXD),
+	GPIO_FN(PORT245_SCIFA5_RTS_), \
+	GPIO_FN(MFG2_IN2), \
+	GPIO_FN(PORT245_SCIFB_RTS_), \
+	GPIO_FN(MSIOF2R_TXD),
+	GPIO_FN(PORT246_SCIFA5_RXD), \
+	GPIO_FN(MFG1_OUT1), \
+	GPIO_FN(PORT246_SCIFB_RXD), \
+	GPIO_FN(TPU1TO0),
+	GPIO_FN(PORT247_SCIFA5_TXD), \
+	GPIO_FN(MFG3_OUT2), \
+	GPIO_FN(PORT247_SCIFB_TXD), \
+	GPIO_FN(TPU3TO1),
+	GPIO_FN(PORT248_SCIFA5_SCK), \
+	GPIO_FN(MFG2_OUT1), \
+	GPIO_FN(PORT248_SCIFB_SCK), \
+	GPIO_FN(TPU2TO0), \
+	GPIO_FN(PORT248_I2C_SCL3), \
+	GPIO_FN(MSIOF2R_TSCK),
+	GPIO_FN(PORT249_IROUT), \
+	GPIO_FN(MFG4_IN1), \
+	GPIO_FN(PORT249_I2C_SDA3), \
+	GPIO_FN(MSIOF2R_TSYNC),
+	GPIO_FN(SDHICLK0),
+	GPIO_FN(SDHICD0),
+	GPIO_FN(SDHID0_0),
+	GPIO_FN(SDHID0_1),
+	GPIO_FN(SDHID0_2),
+	GPIO_FN(SDHID0_3),
+	GPIO_FN(SDHICMD0),
+	GPIO_FN(SDHIWP0),
+	GPIO_FN(SDHICLK1),
+	GPIO_FN(SDHID1_0), \
+	GPIO_FN(TS_SPSYNC2),
+	GPIO_FN(SDHID1_1), \
+	GPIO_FN(TS_SDAT2),
+	GPIO_FN(SDHID1_2), \
+	GPIO_FN(TS_SDEN2),
+	GPIO_FN(SDHID1_3), \
+	GPIO_FN(TS_SCK2),
+	GPIO_FN(SDHICMD1),
+	GPIO_FN(SDHICLK2),
+	GPIO_FN(SDHID2_0), \
+	GPIO_FN(TS_SPSYNC4),
+	GPIO_FN(SDHID2_1), \
+	GPIO_FN(TS_SDAT4),
+	GPIO_FN(SDHID2_2), \
+	GPIO_FN(TS_SDEN4),
+	GPIO_FN(SDHID2_3), \
+	GPIO_FN(TS_SCK4),
+	GPIO_FN(SDHICMD2),
+	GPIO_FN(MMCCLK0),
+	GPIO_FN(MMCD0_0),
+	GPIO_FN(MMCD0_1),
+	GPIO_FN(MMCD0_2),
+	GPIO_FN(MMCD0_3),
+	GPIO_FN(MMCD0_4), \
+	GPIO_FN(TS_SPSYNC5),
+	GPIO_FN(MMCD0_5), \
+	GPIO_FN(TS_SDAT5),
+	GPIO_FN(MMCD0_6), \
+	GPIO_FN(TS_SDEN5),
+	GPIO_FN(MMCD0_7), \
+	GPIO_FN(TS_SCK5),
+	GPIO_FN(MMCCMD0),
+	GPIO_FN(RESETOUTS_), \
+	GPIO_FN(EXTAL2OUT),
+	GPIO_FN(MCP_WAIT__MCP_FRB),
+	GPIO_FN(MCP_CKO), \
+	GPIO_FN(MMCCLK1),
+	GPIO_FN(MCP_D15_MCP_NAF15),
+	GPIO_FN(MCP_D14_MCP_NAF14),
+	GPIO_FN(MCP_D13_MCP_NAF13),
+	GPIO_FN(MCP_D12_MCP_NAF12),
+	GPIO_FN(MCP_D11_MCP_NAF11),
+	GPIO_FN(MCP_D10_MCP_NAF10),
+	GPIO_FN(MCP_D9_MCP_NAF9),
+	GPIO_FN(MCP_D8_MCP_NAF8), \
+	GPIO_FN(MMCCMD1),
+	GPIO_FN(MCP_D7_MCP_NAF7), \
+	GPIO_FN(MMCD1_7),
+
+	GPIO_FN(MCP_D6_MCP_NAF6), \
+	GPIO_FN(MMCD1_6),
+	GPIO_FN(MCP_D5_MCP_NAF5), \
+	GPIO_FN(MMCD1_5),
+	GPIO_FN(MCP_D4_MCP_NAF4), \
+	GPIO_FN(MMCD1_4),
+	GPIO_FN(MCP_D3_MCP_NAF3), \
+	GPIO_FN(MMCD1_3),
+	GPIO_FN(MCP_D2_MCP_NAF2), \
+	GPIO_FN(MMCD1_2),
+	GPIO_FN(MCP_D1_MCP_NAF1), \
+	GPIO_FN(MMCD1_1),
+	GPIO_FN(MCP_D0_MCP_NAF0), \
+	GPIO_FN(MMCD1_0),
+	GPIO_FN(MCP_NBRSTOUT_),
+	GPIO_FN(MCP_WE0__MCP_FWE), \
+	GPIO_FN(MCP_RDWR_MCP_FWE),
+
+	/* MSEL2 special cases */
+	GPIO_FN(TSIF2_TS_XX1),
+	GPIO_FN(TSIF2_TS_XX2),
+	GPIO_FN(TSIF2_TS_XX3),
+	GPIO_FN(TSIF2_TS_XX4),
+	GPIO_FN(TSIF2_TS_XX5),
+	GPIO_FN(TSIF1_TS_XX1),
+	GPIO_FN(TSIF1_TS_XX2),
+	GPIO_FN(TSIF1_TS_XX3),
+	GPIO_FN(TSIF1_TS_XX4),
+	GPIO_FN(TSIF1_TS_XX5),
+	GPIO_FN(TSIF0_TS_XX1),
+	GPIO_FN(TSIF0_TS_XX2),
+	GPIO_FN(TSIF0_TS_XX3),
+	GPIO_FN(TSIF0_TS_XX4),
+	GPIO_FN(TSIF0_TS_XX5),
+	GPIO_FN(MST1_TS_XX1),
+	GPIO_FN(MST1_TS_XX2),
+	GPIO_FN(MST1_TS_XX3),
+	GPIO_FN(MST1_TS_XX4),
+	GPIO_FN(MST1_TS_XX5),
+	GPIO_FN(MST0_TS_XX1),
+	GPIO_FN(MST0_TS_XX2),
+	GPIO_FN(MST0_TS_XX3),
+	GPIO_FN(MST0_TS_XX4),
+	GPIO_FN(MST0_TS_XX5),
+
+	/* MSEL3 special cases */
+	GPIO_FN(SDHI0_VCCQ_MC0_ON),
+	GPIO_FN(SDHI0_VCCQ_MC0_OFF),
+	GPIO_FN(DEBUG_MON_VIO),
+	GPIO_FN(DEBUG_MON_LCDD),
+	GPIO_FN(LCDC_LCDC0),
+	GPIO_FN(LCDC_LCDC1),
+
+	/* MSEL4 special cases */
+	GPIO_FN(IRQ9_MEM_INT),
+	GPIO_FN(IRQ9_MCP_INT),
+	GPIO_FN(A11),
+	GPIO_FN(KEYOUT8),
+	GPIO_FN(TPU4TO3),
+	GPIO_FN(RESETA_N_PU_ON),
+	GPIO_FN(RESETA_N_PU_OFF),
+	GPIO_FN(EDBGREQ_PD),
+	GPIO_FN(EDBGREQ_PU),
+
+	/* Functions with pull-ups */
+	GPIO_FN(KEYIN0_PU),
+	GPIO_FN(KEYIN1_PU),
+	GPIO_FN(KEYIN2_PU),
+	GPIO_FN(KEYIN3_PU),
+	GPIO_FN(KEYIN4_PU),
+	GPIO_FN(KEYIN5_PU),
+	GPIO_FN(KEYIN6_PU),
+	GPIO_FN(KEYIN7_PU),
+	GPIO_FN(SDHICD0_PU),
+	GPIO_FN(SDHID0_0_PU),
+	GPIO_FN(SDHID0_1_PU),
+	GPIO_FN(SDHID0_2_PU),
+	GPIO_FN(SDHID0_3_PU),
+	GPIO_FN(SDHICMD0_PU),
+	GPIO_FN(SDHIWP0_PU),
+	GPIO_FN(SDHID1_0_PU),
+	GPIO_FN(SDHID1_1_PU),
+	GPIO_FN(SDHID1_2_PU),
+	GPIO_FN(SDHID1_3_PU),
+	GPIO_FN(SDHICMD1_PU),
+	GPIO_FN(SDHID2_0_PU),
+	GPIO_FN(SDHID2_1_PU),
+	GPIO_FN(SDHID2_2_PU),
+	GPIO_FN(SDHID2_3_PU),
+	GPIO_FN(SDHICMD2_PU),
+	GPIO_FN(MMCCMD0_PU),
+	GPIO_FN(MMCCMD1_PU),
+	GPIO_FN(MMCD0_0_PU),
+	GPIO_FN(MMCD0_1_PU),
+	GPIO_FN(MMCD0_2_PU),
+	GPIO_FN(MMCD0_3_PU),
+	GPIO_FN(MMCD0_4_PU),
+	GPIO_FN(MMCD0_5_PU),
+	GPIO_FN(MMCD0_6_PU),
+	GPIO_FN(MMCD0_7_PU),
+	GPIO_FN(FSIACK_PU),
+	GPIO_FN(FSIAILR_PU),
+	GPIO_FN(FSIAIBT_PU),
+	GPIO_FN(FSIAISLD_PU),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0, 0xe6050000), /* PORT0CR */
+	PORTCR(1, 0xe6050001), /* PORT1CR */
+	PORTCR(2, 0xe6050002), /* PORT2CR */
+	PORTCR(3, 0xe6050003), /* PORT3CR */
+	PORTCR(4, 0xe6050004), /* PORT4CR */
+	PORTCR(5, 0xe6050005), /* PORT5CR */
+	PORTCR(6, 0xe6050006), /* PORT6CR */
+	PORTCR(7, 0xe6050007), /* PORT7CR */
+	PORTCR(8, 0xe6050008), /* PORT8CR */
+	PORTCR(9, 0xe6050009), /* PORT9CR */
+
+	PORTCR(10, 0xe605000a), /* PORT10CR */
+	PORTCR(11, 0xe605000b), /* PORT11CR */
+	PORTCR(12, 0xe605000c), /* PORT12CR */
+	PORTCR(13, 0xe605000d), /* PORT13CR */
+	PORTCR(14, 0xe605000e), /* PORT14CR */
+	PORTCR(15, 0xe605000f), /* PORT15CR */
+	PORTCR(16, 0xe6050010), /* PORT16CR */
+	PORTCR(17, 0xe6050011), /* PORT17CR */
+	PORTCR(18, 0xe6050012), /* PORT18CR */
+	PORTCR(19, 0xe6050013), /* PORT19CR */
+
+	PORTCR(20, 0xe6050014), /* PORT20CR */
+	PORTCR(21, 0xe6050015), /* PORT21CR */
+	PORTCR(22, 0xe6050016), /* PORT22CR */
+	PORTCR(23, 0xe6050017), /* PORT23CR */
+	PORTCR(24, 0xe6050018), /* PORT24CR */
+	PORTCR(25, 0xe6050019), /* PORT25CR */
+	PORTCR(26, 0xe605001a), /* PORT26CR */
+	PORTCR(27, 0xe605001b), /* PORT27CR */
+	PORTCR(28, 0xe605001c), /* PORT28CR */
+	PORTCR(29, 0xe605001d), /* PORT29CR */
+
+	PORTCR(30, 0xe605001e), /* PORT30CR */
+	PORTCR(31, 0xe605001f), /* PORT31CR */
+	PORTCR(32, 0xe6051020), /* PORT32CR */
+	PORTCR(33, 0xe6051021), /* PORT33CR */
+	PORTCR(34, 0xe6051022), /* PORT34CR */
+	PORTCR(35, 0xe6051023), /* PORT35CR */
+	PORTCR(36, 0xe6051024), /* PORT36CR */
+	PORTCR(37, 0xe6051025), /* PORT37CR */
+	PORTCR(38, 0xe6051026), /* PORT38CR */
+	PORTCR(39, 0xe6051027), /* PORT39CR */
+
+	PORTCR(40, 0xe6051028), /* PORT40CR */
+	PORTCR(41, 0xe6051029), /* PORT41CR */
+	PORTCR(42, 0xe605102a), /* PORT42CR */
+	PORTCR(43, 0xe605102b), /* PORT43CR */
+	PORTCR(44, 0xe605102c), /* PORT44CR */
+	PORTCR(45, 0xe605102d), /* PORT45CR */
+	PORTCR(46, 0xe605102e), /* PORT46CR */
+	PORTCR(47, 0xe605102f), /* PORT47CR */
+	PORTCR(48, 0xe6051030), /* PORT48CR */
+	PORTCR(49, 0xe6051031), /* PORT49CR */
+
+	PORTCR(50, 0xe6051032), /* PORT50CR */
+	PORTCR(51, 0xe6051033), /* PORT51CR */
+	PORTCR(52, 0xe6051034), /* PORT52CR */
+	PORTCR(53, 0xe6051035), /* PORT53CR */
+	PORTCR(54, 0xe6051036), /* PORT54CR */
+	PORTCR(55, 0xe6051037), /* PORT55CR */
+	PORTCR(56, 0xe6051038), /* PORT56CR */
+	PORTCR(57, 0xe6051039), /* PORT57CR */
+	PORTCR(58, 0xe605103a), /* PORT58CR */
+	PORTCR(59, 0xe605103b), /* PORT59CR */
+
+	PORTCR(60, 0xe605103c), /* PORT60CR */
+	PORTCR(61, 0xe605103d), /* PORT61CR */
+	PORTCR(62, 0xe605103e), /* PORT62CR */
+	PORTCR(63, 0xe605103f), /* PORT63CR */
+	PORTCR(64, 0xe6051040), /* PORT64CR */
+	PORTCR(65, 0xe6051041), /* PORT65CR */
+	PORTCR(66, 0xe6051042), /* PORT66CR */
+	PORTCR(67, 0xe6051043), /* PORT67CR */
+	PORTCR(68, 0xe6051044), /* PORT68CR */
+	PORTCR(69, 0xe6051045), /* PORT69CR */
+
+	PORTCR(70, 0xe6051046), /* PORT70CR */
+	PORTCR(71, 0xe6051047), /* PORT71CR */
+	PORTCR(72, 0xe6051048), /* PORT72CR */
+	PORTCR(73, 0xe6051049), /* PORT73CR */
+	PORTCR(74, 0xe605104a), /* PORT74CR */
+	PORTCR(75, 0xe605104b), /* PORT75CR */
+	PORTCR(76, 0xe605104c), /* PORT76CR */
+	PORTCR(77, 0xe605104d), /* PORT77CR */
+	PORTCR(78, 0xe605104e), /* PORT78CR */
+	PORTCR(79, 0xe605104f), /* PORT79CR */
+
+	PORTCR(80, 0xe6051050), /* PORT80CR */
+	PORTCR(81, 0xe6051051), /* PORT81CR */
+	PORTCR(82, 0xe6051052), /* PORT82CR */
+	PORTCR(83, 0xe6051053), /* PORT83CR */
+	PORTCR(84, 0xe6051054), /* PORT84CR */
+	PORTCR(85, 0xe6051055), /* PORT85CR */
+	PORTCR(86, 0xe6051056), /* PORT86CR */
+	PORTCR(87, 0xe6051057), /* PORT87CR */
+	PORTCR(88, 0xe6051058), /* PORT88CR */
+	PORTCR(89, 0xe6051059), /* PORT89CR */
+
+	PORTCR(90, 0xe605105a), /* PORT90CR */
+	PORTCR(91, 0xe605105b), /* PORT91CR */
+	PORTCR(92, 0xe605105c), /* PORT92CR */
+	PORTCR(93, 0xe605105d), /* PORT93CR */
+	PORTCR(94, 0xe605105e), /* PORT94CR */
+	PORTCR(95, 0xe605105f), /* PORT95CR */
+	PORTCR(96, 0xe6052060), /* PORT96CR */
+	PORTCR(97, 0xe6052061), /* PORT97CR */
+	PORTCR(98, 0xe6052062), /* PORT98CR */
+	PORTCR(99, 0xe6052063), /* PORT99CR */
+
+	PORTCR(100, 0xe6052064), /* PORT100CR */
+	PORTCR(101, 0xe6052065), /* PORT101CR */
+	PORTCR(102, 0xe6052066), /* PORT102CR */
+	PORTCR(103, 0xe6052067), /* PORT103CR */
+	PORTCR(104, 0xe6052068), /* PORT104CR */
+	PORTCR(105, 0xe6052069), /* PORT105CR */
+	PORTCR(106, 0xe605206a), /* PORT106CR */
+	PORTCR(107, 0xe605206b), /* PORT107CR */
+	PORTCR(108, 0xe605206c), /* PORT108CR */
+	PORTCR(109, 0xe605206d), /* PORT109CR */
+
+	PORTCR(110, 0xe605206e), /* PORT110CR */
+	PORTCR(111, 0xe605206f), /* PORT111CR */
+	PORTCR(112, 0xe6052070), /* PORT112CR */
+	PORTCR(113, 0xe6052071), /* PORT113CR */
+	PORTCR(114, 0xe6052072), /* PORT114CR */
+	PORTCR(115, 0xe6052073), /* PORT115CR */
+	PORTCR(116, 0xe6052074), /* PORT116CR */
+	PORTCR(117, 0xe6052075), /* PORT117CR */
+	PORTCR(118, 0xe6052076), /* PORT118CR */
+
+	PORTCR(128, 0xe6052080), /* PORT128CR */
+	PORTCR(129, 0xe6052081), /* PORT129CR */
+
+	PORTCR(130, 0xe6052082), /* PORT130CR */
+	PORTCR(131, 0xe6052083), /* PORT131CR */
+	PORTCR(132, 0xe6052084), /* PORT132CR */
+	PORTCR(133, 0xe6052085), /* PORT133CR */
+	PORTCR(134, 0xe6052086), /* PORT134CR */
+	PORTCR(135, 0xe6052087), /* PORT135CR */
+	PORTCR(136, 0xe6052088), /* PORT136CR */
+	PORTCR(137, 0xe6052089), /* PORT137CR */
+	PORTCR(138, 0xe605208a), /* PORT138CR */
+	PORTCR(139, 0xe605208b), /* PORT139CR */
+
+	PORTCR(140, 0xe605208c), /* PORT140CR */
+	PORTCR(141, 0xe605208d), /* PORT141CR */
+	PORTCR(142, 0xe605208e), /* PORT142CR */
+	PORTCR(143, 0xe605208f), /* PORT143CR */
+	PORTCR(144, 0xe6052090), /* PORT144CR */
+	PORTCR(145, 0xe6052091), /* PORT145CR */
+	PORTCR(146, 0xe6052092), /* PORT146CR */
+	PORTCR(147, 0xe6052093), /* PORT147CR */
+	PORTCR(148, 0xe6052094), /* PORT148CR */
+	PORTCR(149, 0xe6052095), /* PORT149CR */
+
+	PORTCR(150, 0xe6052096), /* PORT150CR */
+	PORTCR(151, 0xe6052097), /* PORT151CR */
+	PORTCR(152, 0xe6052098), /* PORT152CR */
+	PORTCR(153, 0xe6052099), /* PORT153CR */
+	PORTCR(154, 0xe605209a), /* PORT154CR */
+	PORTCR(155, 0xe605209b), /* PORT155CR */
+	PORTCR(156, 0xe605209c), /* PORT156CR */
+	PORTCR(157, 0xe605209d), /* PORT157CR */
+	PORTCR(158, 0xe605209e), /* PORT158CR */
+	PORTCR(159, 0xe605209f), /* PORT159CR */
+
+	PORTCR(160, 0xe60520a0), /* PORT160CR */
+	PORTCR(161, 0xe60520a1), /* PORT161CR */
+	PORTCR(162, 0xe60520a2), /* PORT162CR */
+	PORTCR(163, 0xe60520a3), /* PORT163CR */
+	PORTCR(164, 0xe60520a4), /* PORT164CR */
+
+	PORTCR(192, 0xe60520c0), /* PORT192CR */
+	PORTCR(193, 0xe60520c1), /* PORT193CR */
+	PORTCR(194, 0xe60520c2), /* PORT194CR */
+	PORTCR(195, 0xe60520c3), /* PORT195CR */
+	PORTCR(196, 0xe60520c4), /* PORT196CR */
+	PORTCR(197, 0xe60520c5), /* PORT197CR */
+	PORTCR(198, 0xe60520c6), /* PORT198CR */
+	PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+	PORTCR(200, 0xe60520c8), /* PORT200CR */
+	PORTCR(201, 0xe60520c9), /* PORT201CR */
+	PORTCR(202, 0xe60520ca), /* PORT202CR */
+	PORTCR(203, 0xe60520cb), /* PORT203CR */
+	PORTCR(204, 0xe60520cc), /* PORT204CR */
+	PORTCR(205, 0xe60520cd), /* PORT205CR */
+	PORTCR(206, 0xe60520ce), /* PORT206CR */
+	PORTCR(207, 0xe60520cf), /* PORT207CR */
+	PORTCR(208, 0xe60520d0), /* PORT208CR */
+	PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+	PORTCR(210, 0xe60520d2), /* PORT210CR */
+	PORTCR(211, 0xe60520d3), /* PORT211CR */
+	PORTCR(212, 0xe60520d4), /* PORT212CR */
+	PORTCR(213, 0xe60520d5), /* PORT213CR */
+	PORTCR(214, 0xe60520d6), /* PORT214CR */
+	PORTCR(215, 0xe60520d7), /* PORT215CR */
+	PORTCR(216, 0xe60520d8), /* PORT216CR */
+	PORTCR(217, 0xe60520d9), /* PORT217CR */
+	PORTCR(218, 0xe60520da), /* PORT218CR */
+	PORTCR(219, 0xe60520db), /* PORT219CR */
+
+	PORTCR(220, 0xe60520dc), /* PORT220CR */
+	PORTCR(221, 0xe60520dd), /* PORT221CR */
+	PORTCR(222, 0xe60520de), /* PORT222CR */
+	PORTCR(223, 0xe60520df), /* PORT223CR */
+	PORTCR(224, 0xe60530e0), /* PORT224CR */
+	PORTCR(225, 0xe60530e1), /* PORT225CR */
+	PORTCR(226, 0xe60530e2), /* PORT226CR */
+	PORTCR(227, 0xe60530e3), /* PORT227CR */
+	PORTCR(228, 0xe60530e4), /* PORT228CR */
+	PORTCR(229, 0xe60530e5), /* PORT229CR */
+
+	PORTCR(230, 0xe60530e6), /* PORT230CR */
+	PORTCR(231, 0xe60530e7), /* PORT231CR */
+	PORTCR(232, 0xe60530e8), /* PORT232CR */
+	PORTCR(233, 0xe60530e9), /* PORT233CR */
+	PORTCR(234, 0xe60530ea), /* PORT234CR */
+	PORTCR(235, 0xe60530eb), /* PORT235CR */
+	PORTCR(236, 0xe60530ec), /* PORT236CR */
+	PORTCR(237, 0xe60530ed), /* PORT237CR */
+	PORTCR(238, 0xe60530ee), /* PORT238CR */
+	PORTCR(239, 0xe60530ef), /* PORT239CR */
+
+	PORTCR(240, 0xe60530f0), /* PORT240CR */
+	PORTCR(241, 0xe60530f1), /* PORT241CR */
+	PORTCR(242, 0xe60530f2), /* PORT242CR */
+	PORTCR(243, 0xe60530f3), /* PORT243CR */
+	PORTCR(244, 0xe60530f4), /* PORT244CR */
+	PORTCR(245, 0xe60530f5), /* PORT245CR */
+	PORTCR(246, 0xe60530f6), /* PORT246CR */
+	PORTCR(247, 0xe60530f7), /* PORT247CR */
+	PORTCR(248, 0xe60530f8), /* PORT248CR */
+	PORTCR(249, 0xe60530f9), /* PORT249CR */
+
+	PORTCR(250, 0xe60530fa), /* PORT250CR */
+	PORTCR(251, 0xe60530fb), /* PORT251CR */
+	PORTCR(252, 0xe60530fc), /* PORT252CR */
+	PORTCR(253, 0xe60530fd), /* PORT253CR */
+	PORTCR(254, 0xe60530fe), /* PORT254CR */
+	PORTCR(255, 0xe60530ff), /* PORT255CR */
+	PORTCR(256, 0xe6053100), /* PORT256CR */
+	PORTCR(257, 0xe6053101), /* PORT257CR */
+	PORTCR(258, 0xe6053102), /* PORT258CR */
+	PORTCR(259, 0xe6053103), /* PORT259CR */
+
+	PORTCR(260, 0xe6053104), /* PORT260CR */
+	PORTCR(261, 0xe6053105), /* PORT261CR */
+	PORTCR(262, 0xe6053106), /* PORT262CR */
+	PORTCR(263, 0xe6053107), /* PORT263CR */
+	PORTCR(264, 0xe6053108), /* PORT264CR */
+	PORTCR(265, 0xe6053109), /* PORT265CR */
+	PORTCR(266, 0xe605310a), /* PORT266CR */
+	PORTCR(267, 0xe605310b), /* PORT267CR */
+	PORTCR(268, 0xe605310c), /* PORT268CR */
+	PORTCR(269, 0xe605310d), /* PORT269CR */
+
+	PORTCR(270, 0xe605310e), /* PORT270CR */
+	PORTCR(271, 0xe605310f), /* PORT271CR */
+	PORTCR(272, 0xe6053110), /* PORT272CR */
+	PORTCR(273, 0xe6053111), /* PORT273CR */
+	PORTCR(274, 0xe6053112), /* PORT274CR */
+	PORTCR(275, 0xe6053113), /* PORT275CR */
+	PORTCR(276, 0xe6053114), /* PORT276CR */
+	PORTCR(277, 0xe6053115), /* PORT277CR */
+	PORTCR(278, 0xe6053116), /* PORT278CR */
+	PORTCR(279, 0xe6053117), /* PORT279CR */
+
+	PORTCR(280, 0xe6053118), /* PORT280CR */
+	PORTCR(281, 0xe6053119), /* PORT281CR */
+	PORTCR(282, 0xe605311a), /* PORT282CR */
+
+	PORTCR(288, 0xe6052120), /* PORT288CR */
+	PORTCR(289, 0xe6052121), /* PORT289CR */
+
+	PORTCR(290, 0xe6052122), /* PORT290CR */
+	PORTCR(291, 0xe6052123), /* PORT291CR */
+	PORTCR(292, 0xe6052124), /* PORT292CR */
+	PORTCR(293, 0xe6052125), /* PORT293CR */
+	PORTCR(294, 0xe6052126), /* PORT294CR */
+	PORTCR(295, 0xe6052127), /* PORT295CR */
+	PORTCR(296, 0xe6052128), /* PORT296CR */
+	PORTCR(297, 0xe6052129), /* PORT297CR */
+	PORTCR(298, 0xe605212a), /* PORT298CR */
+	PORTCR(299, 0xe605212b), /* PORT299CR */
+
+	PORTCR(300, 0xe605212c), /* PORT300CR */
+	PORTCR(301, 0xe605212d), /* PORT301CR */
+	PORTCR(302, 0xe605212e), /* PORT302CR */
+	PORTCR(303, 0xe605212f), /* PORT303CR */
+	PORTCR(304, 0xe6052130), /* PORT304CR */
+	PORTCR(305, 0xe6052131), /* PORT305CR */
+	PORTCR(306, 0xe6052132), /* PORT306CR */
+	PORTCR(307, 0xe6052133), /* PORT307CR */
+	PORTCR(308, 0xe6052134), /* PORT308CR */
+	PORTCR(309, 0xe6052135), /* PORT309CR */
+
+	{ PINMUX_CFG_REG("MSEL2CR", 0xe605801c, 32, 1) {
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
+			MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
+			MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
+			MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
+			0, 0,
+			MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
+			MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
+			MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
+			MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
+			MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
+			MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
+			MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
+			MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
+			MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
+			MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
+			MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
+			MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
+			MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
+			MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
+			MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL3CR", 0xe6058020, 32, 1) {
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
+			0, 0,
+			MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
+			0, 0,
+			0, 0,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL4CR", 0xe6058024, 32, 1) {
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
+			0, 0,
+			MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
+			MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
+			MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
+			MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
+			MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
+			0, 0,
+			MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
+			MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
+			MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
+			MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
+			MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
+			MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
+			MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
+			0, 0,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+			PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+			PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+			PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD063_032DR", 0xe6055000, 32) {
+			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+			PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD095_064DR", 0xe6055004, 32) {
+			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR127_096DR", 0xe6056000, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+			PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR159_128DR", 0xe6056004, 32) {
+			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056008, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, PORT164_DATA,
+			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe605600C, 32) {
+			PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+			PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+			PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+			PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+			PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+			PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+			PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+			PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
+			PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+			PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+			PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+			PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+			PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+			PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+			PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+			PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
+			0, 0, 0, 0,
+			0, PORT282_DATA, PORT281_DATA, PORT280_DATA,
+			PORT279_DATA, PORT278_DATA, PORT277_DATA, PORT276_DATA,
+			PORT275_DATA, PORT274_DATA, PORT273_DATA, PORT272_DATA,
+			PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
+			PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
+			PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+			PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR319_288DR", 0xe6056010, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, PORT309_DATA, PORT308_DATA,
+			PORT307_DATA, PORT306_DATA, PORT305_DATA, PORT304_DATA,
+			PORT303_DATA, PORT302_DATA, PORT301_DATA, PORT300_DATA,
+			PORT299_DATA, PORT298_DATA, PORT297_DATA, PORT296_DATA,
+			PORT295_DATA, PORT294_DATA, PORT293_DATA, PORT292_DATA,
+			PORT291_DATA, PORT290_DATA, PORT289_DATA, PORT288_DATA }
+	},
+	{ },
+};
+
+#if 0
+/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */
+#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
+#else
+#define EXT_IRQ16L(n) (n)
+#define EXT_IRQ16H(n) (n)
+#endif
+
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0),
+};
+
+static struct pinmux_info sh73a0_pinmux_info = {
+	.name = "sh73a0_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_FSIAISLD_PU,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
+};
+
+void sh73a0_pinmux_init(void)
+{
+	register_pinmux(&sh73a0_pinmux_info);
+}
diff --git a/roms/u-boot/arch/arm/mach-rmobile/timer.c b/roms/u-boot/arch/arm/mach-rmobile/timer.c
new file mode 100644
index 000000000..ba06535e4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rmobile/timer.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <init.h>
+#include <time.h>
+#include <asm/io.h>
+#include <asm/arch-armv7/globaltimer.h>
+#include <asm/arch/rmobile.h>
+#include <linux/delay.h>
+
+static struct globaltimer *global_timer = \
+		(struct globaltimer *)GLOBAL_TIMER_BASE_ADDR;
+
+#define CLK2MHZ(clk)	(clk / 1000 / 1000)
+static u64 get_cpu_global_timer(void)
+{
+	u32 low, high;
+	u64 timer;
+
+	u32 old = readl(&global_timer->cnt_h);
+	while (1) {
+		low = readl(&global_timer->cnt_l);
+		high = readl(&global_timer->cnt_h);
+		if (old == high)
+			break;
+		else
+			old = high;
+	}
+
+	timer = high;
+	return (u64)((timer << 32) | low);
+}
+
+static u64 get_time_us(void)
+{
+	u64 timer = get_cpu_global_timer();
+
+	timer = ((timer << 2) + (CLK2MHZ(CONFIG_SYS_CPU_CLK) >> 1));
+	do_div(timer, CLK2MHZ(CONFIG_SYS_CPU_CLK));
+	return timer;
+}
+
+static ulong get_time_ms(void)
+{
+	u64 us = get_time_us();
+
+	do_div(us, 1000);
+	return us;
+}
+
+int timer_init(void)
+{
+	writel(0x01, &global_timer->ctl);
+	return 0;
+}
+
+void __udelay(unsigned long usec)
+{
+	u64 start, current;
+	u64 wait;
+
+	start = get_cpu_global_timer();
+	wait = (u64)((usec * CLK2MHZ(CONFIG_SYS_CPU_CLK)) >> 2);
+	do {
+		current = get_cpu_global_timer();
+	} while ((current - start) < wait);
+}
+
+ulong get_timer(ulong base)
+{
+	return get_time_ms() - base;
+}
+
+unsigned long long get_ticks(void)
+{
+	return get_cpu_global_timer();
+}
+
+ulong get_tbclk(void)
+{
+	return (ulong)(CONFIG_SYS_CPU_CLK >> 2);
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/Kconfig
new file mode 100644
index 000000000..407bf3fbe
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/Kconfig
@@ -0,0 +1,390 @@
+if ARCH_ROCKCHIP
+
+config ROCKCHIP_PX30
+	bool "Support Rockchip PX30"
+	select ARM64
+	select SUPPORT_SPL
+	select SUPPORT_TPL
+	select SPL
+	select TPL
+	select TPL_TINY_FRAMEWORK if TPL
+	select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
+	select TPL_NEEDS_SEPARATE_STACK if TPL
+	imply SPL_SEPARATE_BSS
+	select SPL_SERIAL_SUPPORT
+	select TPL_SERIAL_SUPPORT
+	select DEBUG_UART_BOARD_INIT
+	imply ROCKCHIP_COMMON_BOARD
+	imply SPL_ROCKCHIP_COMMON_BOARD
+	help
+	  The Rockchip PX30 is a ARM-based SoC with a quad-core Cortex-A35
+	  including NEON and GPU, Mali-400 graphics, several DDR3 options
+	  and video codec support. Peripherals include Gigabit Ethernet,
+	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+
+config ROCKCHIP_RK3036
+	bool "Support Rockchip RK3036"
+	select CPU_V7A
+	select SUPPORT_SPL
+	select SPL
+	imply USB_FUNCTION_ROCKUSB
+	imply CMD_ROCKUSB
+	imply ROCKCHIP_COMMON_BOARD
+	help
+	  The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7
+	  including NEON and GPU, Mali-400 graphics, several DDR3 options
+	  and video codec support. Peripherals include Gigabit Ethernet,
+	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+
+config ROCKCHIP_RK3128
+	bool "Support Rockchip RK3128"
+	select CPU_V7A
+	imply ROCKCHIP_COMMON_BOARD
+	help
+	  The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7
+	  including NEON and GPU, Mali-400 graphics, several DDR3 options
+	  and video codec support. Peripherals include Gigabit Ethernet,
+	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+
+config ROCKCHIP_RK3188
+	bool "Support Rockchip RK3188"
+	select CPU_V7A
+	select SPL_BOARD_INIT if SPL
+	select SUPPORT_SPL
+	select SPL
+	select SPL_CLK
+	select SPL_REGMAP
+	select SPL_SYSCON
+	select SPL_RAM
+	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_ROCKCHIP_EARLYRETURN_TO_BROM
+	select SPL_ROCKCHIP_BACK_TO_BROM
+	select BOARD_LATE_INIT
+	imply ROCKCHIP_COMMON_BOARD
+	imply SPL_ROCKCHIP_COMMON_BOARD
+	help
+	  The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9
+	  including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two
+	  video interfaces, several memory options and video codec support.
+	  Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S,
+	  UART, SPI, I2C and PWMs.
+
+config ROCKCHIP_RK322X
+	bool "Support Rockchip RK3228/RK3229"
+	select CPU_V7A
+	select SUPPORT_SPL
+	select SUPPORT_TPL
+	select SPL
+	select SPL_DM
+	select SPL_OF_LIBFDT
+	select TPL
+	select TPL_DM
+	select TPL_OF_LIBFDT
+	select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
+	select TPL_NEEDS_SEPARATE_STACK if TPL
+	select SPL_DRIVERS_MISC_SUPPORT
+	imply ROCKCHIP_COMMON_BOARD
+	imply SPL_SERIAL_SUPPORT
+	imply SPL_ROCKCHIP_COMMON_BOARD
+	imply TPL_SERIAL_SUPPORT
+	imply TPL_ROCKCHIP_COMMON_BOARD
+	select TPL_LIBCOMMON_SUPPORT
+	select TPL_LIBGENERIC_SUPPORT
+	help
+	  The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7
+	  including NEON and GPU, Mali-400 graphics, several DDR3 options
+	  and video codec support. Peripherals include Gigabit Ethernet,
+	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+
+config ROCKCHIP_RK3288
+	bool "Support Rockchip RK3288"
+	select CPU_V7A
+	select OF_BOARD_SETUP
+	select SUPPORT_SPL
+	select SPL
+	select SUPPORT_TPL
+	imply PRE_CONSOLE_BUFFER
+	imply ROCKCHIP_COMMON_BOARD
+	imply SPL_ROCKCHIP_COMMON_BOARD
+	imply TPL_CLK
+	imply TPL_DM
+	imply TPL_DRIVERS_MISC_SUPPORT
+	imply TPL_LIBCOMMON_SUPPORT
+	imply TPL_LIBGENERIC_SUPPORT
+	imply TPL_NEEDS_SEPARATE_TEXT_BASE
+	imply TPL_NEEDS_SEPARATE_STACK
+	imply TPL_OF_CONTROL
+	imply TPL_OF_PLATDATA
+	imply TPL_RAM
+	imply TPL_REGMAP
+	imply TPL_ROCKCHIP_COMMON_BOARD
+	imply TPL_SERIAL_SUPPORT
+	imply TPL_SYSCON
+	imply USB_FUNCTION_ROCKUSB
+	imply CMD_ROCKUSB
+	help
+	  The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17
+	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
+	  video interfaces supporting HDMI and eDP, several DDR3 options
+	  and video codec support. Peripherals include Gigabit Ethernet,
+	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
+
+config ROCKCHIP_RK3308
+	bool "Support Rockchip RK3308"
+	select ARM64
+	select DEBUG_UART_BOARD_INIT
+	select SUPPORT_SPL
+	select SUPPORT_TPL
+	select SPL
+	select SPL_ATF
+	select SPL_ATF_NO_PLATFORM_PARAM
+	select SPL_LOAD_FIT
+	imply ROCKCHIP_COMMON_BOARD
+	imply SPL_ROCKCHIP_COMMON_BOARD
+	imply SPL_CLK
+	imply SPL_REGMAP
+	imply SPL_SYSCON
+	imply SPL_RAM
+	imply SPL_SERIAL_SUPPORT
+	imply TPL_SERIAL_SUPPORT
+	imply SPL_SEPARATE_BSS
+	help
+	  The Rockchip RK3308 is a ARM-based Soc which embedded with quad
+	  Cortex-A35 and highly integrated audio interfaces.
+
+config ROCKCHIP_RK3328
+	bool "Support Rockchip RK3328"
+	select ARM64
+	select SUPPORT_SPL
+	select SPL
+	select SUPPORT_TPL
+	select TPL
+	select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL
+	select TPL_NEEDS_SEPARATE_STACK if TPL
+	imply ROCKCHIP_COMMON_BOARD
+	imply ROCKCHIP_SDRAM_COMMON
+	imply SPL_ROCKCHIP_COMMON_BOARD
+	imply SPL_SERIAL_SUPPORT
+	imply TPL_SERIAL_SUPPORT
+	imply SPL_SEPARATE_BSS
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+	select DEBUG_UART_BOARD_INIT
+	select SYS_NS16550
+	help
+	  The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53.
+	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
+	  video interfaces supporting HDMI and eDP, several DDR3 options
+	  and video codec support. Peripherals include Gigabit Ethernet,
+	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
+
+config ROCKCHIP_RK3368
+	bool "Support Rockchip RK3368"
+	select ARM64
+	select SUPPORT_SPL
+	select SUPPORT_TPL
+	select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
+	select TPL_NEEDS_SEPARATE_STACK if TPL
+	imply ROCKCHIP_COMMON_BOARD
+	imply SPL_ROCKCHIP_COMMON_BOARD
+	imply SPL_SEPARATE_BSS
+	imply SPL_SERIAL_SUPPORT
+	imply TPL_SERIAL_SUPPORT
+	imply TPL_ROCKCHIP_COMMON_BOARD
+	help
+	  The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
+	  into a big and little cluster with 4 cores each) Cortex-A53 including
+	  AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache
+	  (for the little cluster), PowerVR G6110 based graphics, one video
+	  output processor supporting LVDS/HDMI/eDP, several DDR3 options and
+	  video codec support.
+
+	  On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO,
+	  I2S, UARTs, SPI, I2C and PWMs.
+
+config ROCKCHIP_RK3399
+	bool "Support Rockchip RK3399"
+	select ARM64
+	select SUPPORT_SPL
+	select SUPPORT_TPL
+	select SPL
+	select SPL_ATF
+	select SPL_BOARD_INIT if SPL
+	select SPL_LOAD_FIT
+	select SPL_CLK if SPL
+	select SPL_PINCTRL if SPL
+	select SPL_RAM if SPL
+	select SPL_REGMAP if SPL
+	select SPL_SYSCON if SPL
+	select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL
+	select TPL_NEEDS_SEPARATE_STACK if TPL
+	select SPL_SEPARATE_BSS
+	select SPL_SERIAL_SUPPORT
+	select SPL_DRIVERS_MISC_SUPPORT
+	select CLK
+	select FIT
+	select PINCTRL
+	select RAM
+	select REGMAP
+	select SYSCON
+	select DM_PMIC
+	select DM_REGULATOR_FIXED
+	select BOARD_LATE_INIT
+	imply PRE_CONSOLE_BUFFER
+	imply ROCKCHIP_COMMON_BOARD
+	imply ROCKCHIP_SDRAM_COMMON
+	imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
+	imply SPL_ROCKCHIP_COMMON_BOARD
+	imply TPL_SERIAL_SUPPORT
+	imply TPL_LIBCOMMON_SUPPORT
+	imply TPL_LIBGENERIC_SUPPORT
+	imply TPL_SYS_MALLOC_SIMPLE
+	imply TPL_DRIVERS_MISC_SUPPORT
+	imply TPL_OF_CONTROL
+	imply TPL_DM
+	imply TPL_REGMAP
+	imply TPL_SYSCON
+	imply TPL_RAM
+	imply TPL_CLK
+	imply TPL_TINY_MEMSET
+	imply TPL_ROCKCHIP_COMMON_BOARD
+	imply SYS_BOOTCOUNT_SINGLEWORD if BOOTCOUNT_LIMIT
+	imply CMD_BOOTCOUNT if BOOTCOUNT_LIMIT
+	help
+	  The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
+	  and quad-core Cortex-A53.
+	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
+	  video interfaces supporting HDMI and eDP, several DDR3 options
+	  and video codec support. Peripherals include Gigabit Ethernet,
+	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
+
+config ROCKCHIP_RV1108
+	bool "Support Rockchip RV1108"
+	select CPU_V7A
+	imply ROCKCHIP_COMMON_BOARD
+	help
+	  The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7
+	  and a DSP.
+
+config ROCKCHIP_USB_UART
+	bool "Route uart output to usb pins"
+	help
+	  Rockchip SoCs have the ability to route the signals of the debug
+	  uart through the d+ and d- pins of a specific usb phy to enable
+	  some form of closed-case debugging. With this option supported
+	  SoCs will enable this routing as a debug measure.
+
+config SPL_ROCKCHIP_BACK_TO_BROM
+	bool "SPL returns to bootrom"
+	default y if ROCKCHIP_RK3036
+	select ROCKCHIP_BROM_HELPER
+	select SPL_BOOTROM_SUPPORT
+	depends on SPL
+	help
+	  Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
+          SPL will return to the boot rom, which will then load the U-Boot
+          binary to keep going on.
+
+config TPL_ROCKCHIP_BACK_TO_BROM
+	bool "TPL returns to bootrom"
+	default y
+	select ROCKCHIP_BROM_HELPER
+	select TPL_BOOTROM_SUPPORT
+	depends on TPL
+	help
+	  Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
+          SPL will return to the boot rom, which will then load the U-Boot
+          binary to keep going on.
+
+config ROCKCHIP_COMMON_BOARD
+	bool "Rockchip common board file"
+	help
+	  Rockchip SoCs have similar boot process, Common board file is mainly
+	  in charge of common process of board_init() and board_late_init() for
+	  U-Boot proper.
+
+config SPL_ROCKCHIP_COMMON_BOARD
+	bool "Rockchip SPL common board file"
+	depends on SPL
+	help
+	  Rockchip SoCs have similar boot process, SPL is mainly in charge of
+	  load and boot Trust ATF/U-Boot firmware, and DRAM init if there is
+	  no TPL for the board.
+
+config TPL_ROCKCHIP_COMMON_BOARD
+	bool "Rockchip TPL common board file"
+	depends on TPL
+	help
+	  Rockchip SoCs have similar boot process, prefer to use TPL for DRAM
+	  init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL
+	  common board is a basic TPL board init which can be shared for most
+	  of SoCs to avoid copy-paste for different SoCs.
+
+config ROCKCHIP_BOOT_MODE_REG
+	hex "Rockchip boot mode flag register address"
+	help
+	  The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h)
+	  according to the value from this register.
+
+config ROCKCHIP_SPL_RESERVE_IRAM
+	hex "Size of IRAM reserved in SPL"
+	default 0
+	help
+	  SPL may need reserve memory for firmware loaded by SPL, whose load
+	  address is in IRAM and may overlay with SPL text area if not
+	  reserved.
+
+config ROCKCHIP_BROM_HELPER
+	bool
+
+config SPL_ROCKCHIP_EARLYRETURN_TO_BROM
+        bool "SPL requires early-return (for RK3188-style BROM) to BROM"
+	depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK
+	help
+	  Some Rockchip BROM variants (e.g. on the RK3188) load the
+	  first stage in segments and enter multiple times. E.g. on
+	  the RK3188, the first 1KB of the first stage are loaded
+	  first and entered; after returning to the BROM, the
+	  remainder of the first stage is loaded, but the BROM
+	  re-enters at the same address/to the same code as previously.
+
+	  This enables support code in the BOOT0 hook for the SPL stage
+	  to allow multiple entries.
+
+config TPL_ROCKCHIP_EARLYRETURN_TO_BROM
+        bool "TPL requires early-return (for RK3188-style BROM) to BROM"
+	depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK
+	help
+	  Some Rockchip BROM variants (e.g. on the RK3188) load the
+	  first stage in segments and enter multiple times. E.g. on
+	  the RK3188, the first 1KB of the first stage are loaded
+	  first and entered; after returning to the BROM, the
+	  remainder of the first stage is loaded, but the BROM
+	  re-enters at the same address/to the same code as previously.
+
+	  This enables support code in the BOOT0 hook for the TPL stage
+	  to allow multiple entries.
+
+config SPL_MMC_SUPPORT
+	default y if !SPL_ROCKCHIP_BACK_TO_BROM
+
+config ROCKCHIP_SPI_IMAGE
+	bool "Build a SPI image for rockchip"
+	depends on HAS_ROM
+	help
+	  Some Rockchip SoCs support booting from SPI flash. Enable this
+	  option to produce a 4MB SPI-flash image (called u-boot.rom)
+	  containing U-Boot. The image is built by binman. U-Boot sits near
+	  the start of the image.
+
+source "arch/arm/mach-rockchip/px30/Kconfig"
+source "arch/arm/mach-rockchip/rk3036/Kconfig"
+source "arch/arm/mach-rockchip/rk3128/Kconfig"
+source "arch/arm/mach-rockchip/rk3188/Kconfig"
+source "arch/arm/mach-rockchip/rk322x/Kconfig"
+source "arch/arm/mach-rockchip/rk3288/Kconfig"
+source "arch/arm/mach-rockchip/rk3308/Kconfig"
+source "arch/arm/mach-rockchip/rk3328/Kconfig"
+source "arch/arm/mach-rockchip/rk3368/Kconfig"
+source "arch/arm/mach-rockchip/rk3399/Kconfig"
+source "arch/arm/mach-rockchip/rv1108/Kconfig"
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/Makefile b/roms/u-boot/arch/arm/mach-rockchip/Makefile
new file mode 100644
index 000000000..121f23a56
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/Makefile
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2014 Google, Inc
+# Copyright (c) 2019 Rockchip Electronics Co., Ltd.
+
+# We don't want the bootrom-helper present in a full U-Boot build, as
+# this may have entered from ATF with the stack-pointer pointing to
+# inaccessible/protected memory (and the bootrom-helper assumes that
+# the stack-pointer is valid before switching to the U-Boot stack).
+obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
+obj-spl-$(CONFIG_SPL_ROCKCHIP_COMMON_BOARD) += spl.o spl-boot-order.o
+obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
+obj-tpl-$(CONFIG_TPL_ROCKCHIP_COMMON_BOARD) += tpl.o
+obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o
+
+obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
+
+# Always include boot_mode.o, as we bypass it (i.e. turn it off)
+# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
+# we can have the preprocessor correctly recognise both 0x0 and 0
+# meaning "turn it off".
+obj-y += boot_mode.o
+obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
+obj-$(CONFIG_MISC_INIT_R) += misc.o
+endif
+
+ifeq ($(CONFIG_TPL_BUILD),)
+obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
+endif
+
+obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
+
+obj-$(CONFIG_ROCKCHIP_PX30) += px30/
+obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
+obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
+obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
+obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
+obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
+obj-$(CONFIG_ROCKCHIP_RK3308) += rk3308/
+obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
+obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
+obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
+obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
+
+# Clear out SPL objects, in case this is a TPL build
+obj-spl-$(CONFIG_TPL_BUILD) =
+
+# Now add SPL/TPL objects back into the main build
+obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
+obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
diff --git a/roms/u-boot/arch/arm/mach-rockchip/board.c b/roms/u-boot/arch/arm/mach-rockchip/board.c
new file mode 100644
index 000000000..5304eb055
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/board.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd.
+ */
+#include <common.h>
+#include <clk.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <fastboot.h>
+#include <init.h>
+#include <log.h>
+#include <ram.h>
+#include <syscon.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/boot_mode.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/periph.h>
+#include <asm/arch-rockchip/misc.h>
+#include <power/regulator.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak int rk_board_late_init(void)
+{
+	return 0;
+}
+
+int board_late_init(void)
+{
+	setup_boot_mode();
+
+	return rk_board_late_init();
+}
+
+int board_init(void)
+{
+	int ret;
+
+#ifdef CONFIG_DM_REGULATOR
+	ret = regulators_enable_boot_on(false);
+	if (ret)
+		debug("%s: Cannot enable boot on regulator\n", __func__);
+#endif
+
+	return 0;
+}
+
+#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
+
+#if defined(CONFIG_USB_GADGET)
+#include <usb.h>
+
+#if defined(CONFIG_USB_GADGET_DWC2_OTG)
+#include <usb/dwc2_udc.h>
+
+static struct dwc2_plat_otg_data otg_data = {
+	.rx_fifo_sz	= 512,
+	.np_tx_fifo_sz	= 16,
+	.tx_fifo_sz	= 128,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	ofnode node;
+	const char *mode;
+	bool matched = false;
+
+	/* find the usb_otg node */
+	node = ofnode_by_compatible(ofnode_null(), "snps,dwc2");
+	while (ofnode_valid(node)) {
+		mode = ofnode_read_string(node, "dr_mode");
+		if (mode && strcmp(mode, "otg") == 0) {
+			matched = true;
+			break;
+		}
+
+		node = ofnode_by_compatible(node, "snps,dwc2");
+	}
+	if (!matched) {
+		debug("Not found usb_otg device\n");
+		return -ENODEV;
+	}
+	otg_data.regs_otg = ofnode_get_addr(node);
+
+#ifdef CONFIG_ROCKCHIP_RK3288
+	int ret;
+	u32 phandle, offset;
+	ofnode phy_node;
+
+	ret = ofnode_read_u32(node, "phys", &phandle);
+	if (ret)
+		return ret;
+
+	node = ofnode_get_by_phandle(phandle);
+	if (!ofnode_valid(node)) {
+		debug("Not found usb phy device\n");
+		return -ENODEV;
+	}
+
+	phy_node = ofnode_get_parent(node);
+	if (!ofnode_valid(node)) {
+		debug("Not found usb phy device\n");
+		return -ENODEV;
+	}
+
+	otg_data.phy_of_node = phy_node;
+	ret = ofnode_read_u32(node, "reg", &offset);
+	if (ret)
+		return ret;
+	otg_data.regs_phy =  offset +
+		(u32)syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+#endif
+	return dwc2_udc_probe(&otg_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	return 0;
+}
+#endif /* CONFIG_USB_GADGET_DWC2_OTG */
+
+#if defined(CONFIG_USB_DWC3_GADGET) && !defined(CONFIG_DM_USB_GADGET)
+#include <dwc3-uboot.h>
+
+static struct dwc3_device dwc3_device_data = {
+	.maximum_speed = USB_SPEED_HIGH,
+	.base = 0xfe800000,
+	.dr_mode = USB_DR_MODE_PERIPHERAL,
+	.index = 0,
+	.dis_u2_susphy_quirk = 1,
+	.hsphy_mode = USBPHY_INTERFACE_MODE_UTMIW,
+};
+
+int usb_gadget_handle_interrupts(int index)
+{
+	dwc3_uboot_handle_interrupt(0);
+	return 0;
+}
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	return dwc3_uboot_init(&dwc3_device_data);
+}
+#endif /* CONFIG_USB_DWC3_GADGET */
+
+#endif /* CONFIG_USB_GADGET */
+
+#if CONFIG_IS_ENABLED(FASTBOOT)
+int fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
+{
+	if (reason != FASTBOOT_REBOOT_REASON_BOOTLOADER)
+		return -ENOTSUPP;
+
+	printf("Setting reboot to fastboot flag ...\n");
+	/* Set boot mode to fastboot */
+	writel(BOOT_FASTBOOT, CONFIG_ROCKCHIP_BOOT_MODE_REG);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+__weak int misc_init_r(void)
+{
+	const u32 cpuid_offset = 0x7;
+	const u32 cpuid_length = 0x10;
+	u8 cpuid[cpuid_length];
+	int ret;
+
+	ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+	if (ret)
+		return ret;
+
+	ret = rockchip_cpuid_set(cpuid, cpuid_length);
+	if (ret)
+		return ret;
+
+	ret = rockchip_setup_macaddr();
+
+	return ret;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/boot_mode.c b/roms/u-boot/arch/arm/mach-rockchip/boot_mode.c
new file mode 100644
index 000000000..215893415
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/boot_mode.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <adc.h>
+#include <command.h>
+#include <env.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/boot_mode.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+
+#if (CONFIG_ROCKCHIP_BOOT_MODE_REG == 0)
+
+int setup_boot_mode(void)
+{
+	return 0;
+}
+
+#else
+
+void set_back_to_bootrom_dnl_flag(void)
+{
+	writel(BOOT_BROM_DOWNLOAD, CONFIG_ROCKCHIP_BOOT_MODE_REG);
+}
+
+/*
+ * detect download key status by adc, most rockchip
+ * based boards use adc sample the download key status,
+ * but there are also some use gpio. So it's better to
+ * make this a weak function that can be override by
+ * some special boards.
+ */
+#define KEY_DOWN_MIN_VAL	0
+#define KEY_DOWN_MAX_VAL	30
+
+__weak int rockchip_dnl_key_pressed(void)
+{
+	unsigned int val;
+	struct udevice *dev;
+	struct uclass *uc;
+	int ret;
+
+	ret = uclass_get(UCLASS_ADC, &uc);
+	if (ret)
+		return false;
+
+	ret = -ENODEV;
+	uclass_foreach_dev(dev, uc) {
+		if (!strncmp(dev->name, "saradc", 6)) {
+			ret = adc_channel_single_shot(dev->name, 1, &val);
+			break;
+		}
+	}
+
+	if (ret == -ENODEV) {
+		pr_warn("%s: no saradc device found\n", __func__);
+		return false;
+	} else if (ret) {
+		pr_err("%s: adc_channel_single_shot fail!\n", __func__);
+		return false;
+	}
+
+	if ((val >= KEY_DOWN_MIN_VAL) && (val <= KEY_DOWN_MAX_VAL))
+		return true;
+	else
+		return false;
+}
+
+void rockchip_dnl_mode_check(void)
+{
+	if (rockchip_dnl_key_pressed()) {
+		printf("download key pressed, entering download mode...");
+		set_back_to_bootrom_dnl_flag();
+		do_reset(NULL, 0, 0, NULL);
+	}
+}
+
+int setup_boot_mode(void)
+{
+	void *reg = (void *)CONFIG_ROCKCHIP_BOOT_MODE_REG;
+	int boot_mode = readl(reg);
+
+	rockchip_dnl_mode_check();
+
+	boot_mode = readl(reg);
+	debug("%s: boot mode 0x%08x\n", __func__, boot_mode);
+
+	/* Clear boot mode */
+	writel(BOOT_NORMAL, reg);
+
+	switch (boot_mode) {
+	case BOOT_FASTBOOT:
+		debug("%s: enter fastboot!\n", __func__);
+		env_set("preboot", "setenv preboot; fastboot usb0");
+		break;
+	case BOOT_UMS:
+		debug("%s: enter UMS!\n", __func__);
+		env_set("preboot", "setenv preboot; ums mmc 0");
+		break;
+	}
+
+	return 0;
+}
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/bootrom.c b/roms/u-boot/arch/arm/mach-rockchip/bootrom.c
new file mode 100644
index 000000000..b36e559e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/bootrom.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ * Copyright (c) 2017 Google, Inc
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/boot_mode.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/setjmp.h>
+#include <asm/system.h>
+
+/*
+ * Force the jmp_buf to the data-section, as .bss will not be valid
+ * when save_boot_params is invoked.
+ */
+static jmp_buf brom_ctx __section(".data");
+
+static void _back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)
+{
+	longjmp(brom_ctx, brom_cmd);
+}
+
+void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)
+{
+#if CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT)
+	puts("Returning to boot ROM...\n");
+#endif
+	_back_to_bootrom(brom_cmd);
+}
+
+/*
+ * we back to bootrom download mode if get a
+ * BOOT_BROM_DOWNLOAD flag in boot mode register
+ *
+ * note: the boot mode register is configured by
+ * application(next stage bootloader, kernel, etc),
+ * and the bootrom never check this register, so we need
+ * to check it and back to bootrom at very early bootstage(before
+ * some basic configurations(such as interrupts) been
+ * changed by TPL/SPL, as the bootrom download operation
+ * relies on many default settings(such as interrupts) by
+ * itself.
+ */
+static bool check_back_to_brom_dnl_flag(void)
+{
+	u32 boot_mode;
+
+	if (CONFIG_ROCKCHIP_BOOT_MODE_REG) {
+		boot_mode = readl(CONFIG_ROCKCHIP_BOOT_MODE_REG);
+		if (boot_mode == BOOT_BROM_DOWNLOAD) {
+			writel(0, CONFIG_ROCKCHIP_BOOT_MODE_REG);
+			return true;
+		}
+	}
+
+	return false;
+}
+
+/*
+ * All Rockchip BROM implementations enter with a valid stack-pointer,
+ * so this can safely be implemented in C (providing a single
+ * implementation both for ARMv7 and AArch64).
+ */
+int save_boot_params(void)
+{
+	int  ret = setjmp(brom_ctx);
+
+	switch (ret) {
+	case 0:
+		if (check_back_to_brom_dnl_flag())
+			_back_to_bootrom(BROM_BOOT_ENTER_DNL);
+		/*
+		 * This is the initial pass through this function
+		 * (i.e. saving the context), setjmp just setup up the
+		 * brom_ctx: transfer back into the startup-code at
+		 * 'save_boot_params_ret' and let the compiler know
+		 * that this will not return.
+		 */
+		save_boot_params_ret();
+		while (true)
+			/* does not return */;
+		break;
+
+	case BROM_BOOT_NEXTSTAGE:
+		/*
+		 * To instruct the BROM to boot the next stage, we
+		 * need to return 0 to it: i.e. we need to rewrite
+		 * the return code once more.
+		 */
+		ret = 0;
+		break;
+	case BROM_BOOT_ENTER_DNL:
+		/*
+		 * A non-zero return value will instruct the BROM enter
+		 * download mode.
+		 */
+		ret = 1;
+		break;
+	default:
+#if CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT)
+		puts("FATAL: unexpected command to back_to_bootrom()\n");
+#endif
+		hang();
+	};
+
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/cpu-info.c b/roms/u-boot/arch/arm/mach-rockchip/cpu-info.c
new file mode 100644
index 000000000..d0f030109
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/cpu-info.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2019 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <env.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <linux/err.h>
+
+char *get_reset_cause(void)
+{
+	struct rockchip_cru *cru = rockchip_get_cru();
+	char *cause = NULL;
+
+	if (IS_ERR(cru))
+		return cause;
+
+	switch (cru->glb_rst_st) {
+	case GLB_POR_RST:
+		cause = "POR";
+		break;
+	case FST_GLB_RST_ST:
+	case SND_GLB_RST_ST:
+		cause = "RST";
+		break;
+	case FST_GLB_TSADC_RST_ST:
+	case SND_GLB_TSADC_RST_ST:
+		cause = "THERMAL";
+		break;
+	case FST_GLB_WDT_RST_ST:
+	case SND_GLB_WDT_RST_ST:
+		cause = "WDOG";
+		break;
+	default:
+		cause = "unknown reset";
+	}
+
+	return cause;
+}
+
+#if CONFIG_IS_ENABLED(DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char *cause = get_reset_cause();
+
+	printf("SoC: Rockchip %s\n", CONFIG_SYS_SOC);
+	printf("Reset cause: %s\n", cause);
+
+	/**
+	 * reset_reason env is used by rk3288, due to special use case
+	 * to figure it the boot behavior. so keep this as it is.
+	 */
+	env_set("reset_reason", cause);
+
+	/* TODO print operating temparature and clock */
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/make_fit_atf.py b/roms/u-boot/arch/arm/mach-rockchip/make_fit_atf.py
new file mode 100755
index 000000000..f3224d255
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/make_fit_atf.py
@@ -0,0 +1,240 @@
+#!/usr/bin/env python3
+"""
+# SPDX-License-Identifier: GPL-2.0+
+#
+# A script to generate FIT image source for rockchip boards
+# with ARM Trusted Firmware
+# and multiple device trees (given on the command line)
+#
+# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+"""
+
+import os
+import sys
+import getopt
+import logging
+import struct
+
+DT_HEADER = """
+/*
+ * This is a generated file.
+ */
+/dts-v1/;
+
+/ {
+	description = "FIT image for U-Boot with bl31 (TF-A)";
+	#address-cells = <1>;
+
+	images {
+"""
+
+DT_UBOOT = """
+		uboot {
+			description = "U-Boot (64-bit)";
+			data = /incbin/("u-boot-nodtb.bin");
+			type = "standalone";
+			os = "U-Boot";
+			arch = "arm64";
+			compression = "none";
+			load = <0x%08x>;
+		};
+
+"""
+
+DT_IMAGES_NODE_END = """	};
+
+"""
+
+DT_END = "};"
+
+def append_bl31_node(file, atf_index, phy_addr, elf_entry):
+    # Append BL31 DT node to input FIT dts file.
+    data = 'bl31_0x%08x.bin' % phy_addr
+    file.write('\t\tatf_%d {\n' % atf_index)
+    file.write('\t\t\tdescription = \"ARM Trusted Firmware\";\n')
+    file.write('\t\t\tdata = /incbin/("%s");\n' % data)
+    file.write('\t\t\ttype = "firmware";\n')
+    file.write('\t\t\tarch = "arm64";\n')
+    file.write('\t\t\tos = "arm-trusted-firmware";\n')
+    file.write('\t\t\tcompression = "none";\n')
+    file.write('\t\t\tload = <0x%08x>;\n' % phy_addr)
+    if atf_index == 1:
+        file.write('\t\t\tentry = <0x%08x>;\n' % elf_entry)
+    file.write('\t\t};\n')
+    file.write('\n')
+
+def append_tee_node(file, atf_index, phy_addr, elf_entry):
+    # Append TEE DT node to input FIT dts file.
+    data = 'tee_0x%08x.bin' % phy_addr
+    file.write('\t\tatf_%d {\n' % atf_index)
+    file.write('\t\t\tdescription = \"TEE\";\n')
+    file.write('\t\t\tdata = /incbin/("%s");\n' % data)
+    file.write('\t\t\ttype = "tee";\n')
+    file.write('\t\t\tarch = "arm64";\n')
+    file.write('\t\t\tos = "tee";\n')
+    file.write('\t\t\tcompression = "none";\n')
+    file.write('\t\t\tload = <0x%08x>;\n' % phy_addr)
+    file.write('\t\t\tentry = <0x%08x>;\n' % elf_entry)
+    file.write('\t\t};\n')
+    file.write('\n')
+
+def append_fdt_node(file, dtbs):
+    # Append FDT nodes.
+    cnt = 1
+    for dtb in dtbs:
+        dtname = os.path.basename(dtb)
+        file.write('\t\tfdt_%d {\n' % cnt)
+        file.write('\t\t\tdescription = "%s";\n' % dtname)
+        file.write('\t\t\tdata = /incbin/("%s");\n' % dtb)
+        file.write('\t\t\ttype = "flat_dt";\n')
+        file.write('\t\t\tcompression = "none";\n')
+        file.write('\t\t};\n')
+        file.write('\n')
+        cnt = cnt + 1
+
+def append_conf_section(file, cnt, dtname, segments):
+    file.write('\t\tconfig_%d {\n' % cnt)
+    file.write('\t\t\tdescription = "%s";\n' % dtname)
+    file.write('\t\t\tfirmware = "atf_1";\n')
+    file.write('\t\t\tloadables = "uboot"')
+    if segments > 1:
+        file.write(',')
+    for i in range(1, segments):
+        file.write('"atf_%d"' % (i + 1))
+        if i != (segments - 1):
+            file.write(',')
+        else:
+            file.write(';\n')
+    if segments <= 1:
+        file.write(';\n')
+    file.write('\t\t\tfdt = "fdt_%d";\n' % cnt)
+    file.write('\t\t};\n')
+    file.write('\n')
+
+def append_conf_node(file, dtbs, segments):
+    # Append configeration nodes.
+    cnt = 1
+    file.write('\tconfigurations {\n')
+    file.write('\t\tdefault = "config_1";\n')
+    for dtb in dtbs:
+        dtname = os.path.basename(dtb)
+        append_conf_section(file, cnt, dtname, segments)
+        cnt = cnt + 1
+    file.write('\t};\n')
+    file.write('\n')
+
+def generate_atf_fit_dts_uboot(fit_file, uboot_file_name):
+    segments = unpack_elf(uboot_file_name)
+    if len(segments) != 1:
+        raise ValueError("Invalid u-boot ELF image '%s'" % uboot_file_name)
+    index, entry, p_paddr, data = segments[0]
+    fit_file.write(DT_UBOOT % p_paddr)
+
+def generate_atf_fit_dts_bl31(fit_file, bl31_file_name, tee_file_name, dtbs_file_name):
+    segments = unpack_elf(bl31_file_name)
+    for index, entry, paddr, data in segments:
+        append_bl31_node(fit_file, index + 1, paddr, entry)
+    num_segments = len(segments)
+
+    if tee_file_name:
+        tee_segments = unpack_elf(tee_file_name)
+        for index, entry, paddr, data in tee_segments:
+            append_tee_node(fit_file, num_segments + index + 1, paddr, entry)
+        num_segments = num_segments + len(tee_segments)
+
+    append_fdt_node(fit_file, dtbs_file_name)
+    fit_file.write(DT_IMAGES_NODE_END)
+    append_conf_node(fit_file, dtbs_file_name, num_segments)
+
+def generate_atf_fit_dts(fit_file_name, bl31_file_name, tee_file_name, uboot_file_name, dtbs_file_name):
+    # Generate FIT script for ATF image.
+    if fit_file_name != sys.stdout:
+        fit_file = open(fit_file_name, "wb")
+    else:
+        fit_file = sys.stdout
+
+    fit_file.write(DT_HEADER)
+    generate_atf_fit_dts_uboot(fit_file, uboot_file_name)
+    generate_atf_fit_dts_bl31(fit_file, bl31_file_name, tee_file_name, dtbs_file_name)
+    fit_file.write(DT_END)
+
+    if fit_file_name != sys.stdout:
+        fit_file.close()
+
+def generate_atf_binary(bl31_file_name):
+    for index, entry, paddr, data in unpack_elf(bl31_file_name):
+        file_name = 'bl31_0x%08x.bin' % paddr
+        with open(file_name, "wb") as atf:
+            atf.write(data)
+
+def generate_tee_binary(tee_file_name):
+    if tee_file_name:
+        for index, entry, paddr, data in unpack_elf(tee_file_name):
+            file_name = 'tee_0x%08x.bin' % paddr
+            with open(file_name, "wb") as atf:
+                atf.write(data)
+
+def unpack_elf(filename):
+    with open(filename, 'rb') as file:
+        elf = file.read()
+    if elf[0:7] != b'\x7fELF\x02\x01\x01' or elf[18:20] != b'\xb7\x00':
+        raise ValueError("Invalid arm64 ELF file '%s'" % filename)
+
+    e_entry, e_phoff = struct.unpack_from('<2Q', elf, 0x18)
+    e_phentsize, e_phnum = struct.unpack_from('<2H', elf, 0x36)
+    segments = []
+
+    for index in range(e_phnum):
+        offset = e_phoff + e_phentsize * index
+        p_type, p_flags, p_offset = struct.unpack_from('<LLQ', elf, offset)
+        if p_type == 1: # PT_LOAD
+            p_paddr, p_filesz = struct.unpack_from('<2Q', elf, offset + 0x18)
+            if p_filesz > 0:
+                p_data = elf[p_offset:p_offset + p_filesz]
+                segments.append((index, e_entry, p_paddr, p_data))
+    return segments
+
+def main():
+    uboot_elf = "./u-boot"
+    fit_its = sys.stdout
+    if "BL31" in os.environ:
+        bl31_elf=os.getenv("BL31");
+    elif os.path.isfile("./bl31.elf"):
+        bl31_elf = "./bl31.elf"
+    else:
+        os.system("echo 'int main(){}' > bl31.c")
+        os.system("${CROSS_COMPILE}gcc -c bl31.c -o bl31.elf")
+        bl31_elf = "./bl31.elf"
+        logging.basicConfig(format='%(levelname)s:%(message)s', level=logging.DEBUG)
+        logging.warning(' BL31 file bl31.elf NOT found, resulting binary is non-functional')
+        logging.warning(' Please read Building section in doc/README.rockchip')
+
+    if "TEE" in os.environ:
+        tee_elf = os.getenv("TEE")
+    elif os.path.isfile("./tee.elf"):
+        tee_elf = "./tee.elf"
+    else:
+        tee_elf = ""
+
+    opts, args = getopt.getopt(sys.argv[1:], "o:u:b:t:h")
+    for opt, val in opts:
+        if opt == "-o":
+            fit_its = val
+        elif opt == "-u":
+            uboot_elf = val
+        elif opt == "-b":
+            bl31_elf = val
+        elif opt == "-t":
+            tee_elf = val
+        elif opt == "-h":
+            print(__doc__)
+            sys.exit(2)
+
+    dtbs = args
+
+    generate_atf_fit_dts(fit_its, bl31_elf, tee_elf, uboot_elf, dtbs)
+    generate_atf_binary(bl31_elf)
+    generate_tee_binary(tee_elf)
+
+if __name__ == "__main__":
+    main()
diff --git a/roms/u-boot/arch/arm/mach-rockchip/misc.c b/roms/u-boot/arch/arm/mach-rockchip/misc.c
new file mode 100644
index 000000000..87eebd987
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/misc.c
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RK3399: Architecture common definitions
+ *
+ * Copyright (C) 2019 Collabora Inc - https://www.collabora.com/
+ *      Rohan Garg <rohan.garg@collabora.com>
+ *
+ * Based on puma-rk3399.c:
+ *      (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <common.h>
+#include <env.h>
+#include <dm.h>
+#include <hash.h>
+#include <log.h>
+#include <dm/uclass-internal.h>
+#include <misc.h>
+#include <u-boot/crc.h>
+#include <u-boot/sha256.h>
+
+#include <asm/arch-rockchip/misc.h>
+
+int rockchip_setup_macaddr(void)
+{
+#if CONFIG_IS_ENABLED(CMD_NET)
+	int ret;
+	const char *cpuid = env_get("cpuid#");
+	u8 hash[SHA256_SUM_LEN];
+	int size = sizeof(hash);
+	u8 mac_addr[6];
+
+	/* Only generate a MAC address, if none is set in the environment */
+	if (env_get("ethaddr"))
+		return 0;
+
+	if (!cpuid) {
+		debug("%s: could not retrieve 'cpuid#'\n", __func__);
+		return -1;
+	}
+
+	ret = hash_block("sha256", (void *)cpuid, strlen(cpuid), hash, &size);
+	if (ret) {
+		debug("%s: failed to calculate SHA256\n", __func__);
+		return -1;
+	}
+
+	/* Copy 6 bytes of the hash to base the MAC address on */
+	memcpy(mac_addr, hash, 6);
+
+	/* Make this a valid MAC address and set it */
+	mac_addr[0] &= 0xfe;  /* clear multicast bit */
+	mac_addr[0] |= 0x02;  /* set local assignment bit (IEEE802) */
+	eth_env_set_enetaddr("ethaddr", mac_addr);
+#endif
+	return 0;
+}
+
+int rockchip_cpuid_from_efuse(const u32 cpuid_offset,
+			      const u32 cpuid_length,
+			      u8 *cpuid)
+{
+#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE) || CONFIG_IS_ENABLED(ROCKCHIP_OTP)
+	struct udevice *dev;
+	int ret;
+
+	/* retrieve the device */
+#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(rockchip_efuse), &dev);
+#elif CONFIG_IS_ENABLED(ROCKCHIP_OTP)
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(rockchip_otp), &dev);
+#endif
+	if (ret) {
+		debug("%s: could not find efuse device\n", __func__);
+		return -1;
+	}
+
+	/* read the cpu_id range from the efuses */
+	ret = misc_read(dev, cpuid_offset, cpuid, cpuid_length);
+	if (ret) {
+		debug("%s: reading cpuid from the efuses failed\n",
+		      __func__);
+		return -1;
+	}
+#endif
+	return 0;
+}
+
+int rockchip_cpuid_set(const u8 *cpuid, const u32 cpuid_length)
+{
+	u8 low[cpuid_length / 2], high[cpuid_length / 2];
+	char cpuid_str[cpuid_length * 2 + 1];
+	u64 serialno;
+	char serialno_str[17];
+	const char *oldid;
+	int i;
+
+	memset(cpuid_str, 0, sizeof(cpuid_str));
+	for (i = 0; i < 16; i++)
+		sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]);
+
+	debug("cpuid: %s\n", cpuid_str);
+
+	/*
+	 * Mix the cpuid bytes using the same rules as in
+	 *   ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c
+	 */
+	for (i = 0; i < 8; i++) {
+		low[i] = cpuid[1 + (i << 1)];
+		high[i] = cpuid[i << 1];
+	}
+
+	serialno = crc32_no_comp(0, low, 8);
+	serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
+	snprintf(serialno_str, sizeof(serialno_str), "%016llx", serialno);
+
+	oldid = env_get("cpuid#");
+	if (oldid && strcmp(oldid, cpuid_str) != 0)
+		printf("cpuid: value %s present in env does not match hardware %s\n",
+		       oldid, cpuid_str);
+
+	env_set("cpuid#", cpuid_str);
+
+	/* Only generate serial# when none is set yet */
+	if (!env_get("serial#"))
+		env_set("serial#", serialno_str);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/px30-board-tpl.c b/roms/u-boot/arch/arm/mach-rockchip/px30-board-tpl.c
new file mode 100644
index 000000000..085e65062
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/px30-board-tpl.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <init.h>
+#include <ram.h>
+#include <spl.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/sdram_px30.h>
+
+#define TIMER_LOAD_COUNT0	0x00
+#define TIMER_LOAD_COUNT1	0x04
+#define TIMER_CUR_VALUE0	0x08
+#define TIMER_CUR_VALUE1	0x0c
+#define TIMER_CONTROL_REG	0x10
+
+#define TIMER_EN	0x1
+#define	TIMER_FMODE	(0 << 1)
+#define	TIMER_RMODE	(1 << 1)
+
+void secure_timer_init(void)
+{
+	writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_LOAD_COUNT0);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_LOAD_COUNT1);
+	writel(TIMER_EN | TIMER_FMODE,
+	       CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+}
+
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+	/*
+	 * Debug UART can be used from here if required:
+	 *
+	 * debug_uart_init();
+	 * printch('a');
+	 * printhex8(0x1234);
+	 * printascii("string");
+	 */
+	printascii("U-Boot TPL board init\n");
+#endif
+
+	secure_timer_init();
+	ret = sdram_init();
+	if (ret)
+		printascii("sdram_init failed\n");
+
+	/* return to maskrom */
+	back_to_bootrom(BROM_BOOT_NEXTSTAGE);
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/px30/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/px30/Kconfig
new file mode 100644
index 000000000..16090f5b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/px30/Kconfig
@@ -0,0 +1,67 @@
+if ROCKCHIP_PX30
+
+config TARGET_EVB_PX30
+	bool "EVB_PX30"
+	help
+	  This target config option used for below listed px30 boards.
+
+	  EVB_PX30:
+	  * EVB_PX30 is an evaluation board for Rockchip PX30.
+
+config TARGET_ODROID_GO2
+	bool "ODROID_GO2"
+
+config TARGET_PX30_CORE
+	bool "Engicam PX30.Core"
+	help
+	  PX30.Core EDIMM2.2:
+	  * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+	  * EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam.
+	  * PX30.Core needs to mount on top of EDIMM2.2 for creating complete
+	    PX30.Core EDIMM2.2 Starter Kit.
+
+	  PX30.Core CTOUCH2:
+	  * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+	  * CTOUCH2.0 is a general purpose Carrier board with capacitive
+	    touch interface support.
+	  * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
+	    PX30.Core C.TOUCH Carrier board.
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff010200
+
+config SYS_SOC
+	default "px30"
+
+config SYS_MALLOC_F_LEN
+	default 0x400
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config TPL_LDSCRIPT
+	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
+
+config TPL_TEXT_BASE
+	default 0xff0e1000
+
+config TPL_MAX_SIZE
+	default 10240
+
+config TPL_STACK
+	default 0xff0e4fff
+
+config DEBUG_UART_CHANNEL
+	int "Mux channel to use for debug UART2/UART3"
+	depends on DEBUG_UART_BOARD_INIT
+	default 0
+	help
+	  UART2 and UART3 can use two different set of pins to route the output.
+	  For using the UART for early debugging the route to use needs
+	  to be declared (0 or 1).
+
+source "board/engicam/px30_core/Kconfig"
+source "board/hardkernel/odroid_go2/Kconfig"
+source "board/rockchip/evb_px30/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/px30/Makefile b/roms/u-boot/arch/arm/mach-rockchip/px30/Makefile
new file mode 100644
index 000000000..080ce146f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/px30/Makefile
@@ -0,0 +1,13 @@
+#
+# (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += clk_px30.o
+
+ifndef CONFIG_TPL_BUILD
+obj-y += syscon_px30.o
+endif
+
+obj-y += px30.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/px30/clk_px30.c b/roms/u-boot/arch/arm/mach-rockchip/px30/clk_px30.c
new file mode 100644
index 000000000..7edf1321f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/px30/clk_px30.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_px30.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_px30_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct px30_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/px30/px30.c b/roms/u-boot/arch/arm/mach-rockchip/px30/px30.c
new file mode 100644
index 000000000..6fcef63c1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/px30/px30.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co., Ltd
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <init.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/grf_px30.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/uart.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_px30.h>
+#include <dt-bindings/clock/px30-cru.h>
+
+static struct mm_region px30_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0xff000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xff000000UL,
+		.phys = 0xff000000UL,
+		.size = 0x01000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = px30_mem_map;
+
+#define PMU_PWRDN_CON			0xff000018
+#define PMUGRF_BASE			0xff010000
+#define GRF_BASE			0xff140000
+#define CRU_BASE			0xff2b0000
+#define VIDEO_PHY_BASE			0xff2e0000
+#define SERVICE_CORE_ADDR		0xff508000
+#define DDR_FW_BASE			0xff534000
+
+#define FW_DDR_CON			0x40
+
+#define QOS_PRIORITY			0x08
+
+#define QOS_PRIORITY_LEVEL(h, l)	((((h) & 3) << 8) | ((l) & 3))
+
+/* GRF_GPIO1BH_IOMUX */
+enum {
+	GPIO1B7_SHIFT		= 12,
+	GPIO1B7_MASK		= 0xf << GPIO1B7_SHIFT,
+	GPIO1B7_GPIO		= 0,
+	GPIO1B7_FLASH_RDN,
+	GPIO1B7_UART3_RXM1,
+	GPIO1B7_SPI0_CLK,
+
+	GPIO1B6_SHIFT		= 8,
+	GPIO1B6_MASK		= 0xf << GPIO1B6_SHIFT,
+	GPIO1B6_GPIO		= 0,
+	GPIO1B6_FLASH_CS1,
+	GPIO1B6_UART3_TXM1,
+	GPIO1B6_SPI0_CSN,
+};
+
+/* GRF_GPIO1CL_IOMUX */
+enum {
+	GPIO1C1_SHIFT		= 4,
+	GPIO1C1_MASK		= 0xf << GPIO1C1_SHIFT,
+	GPIO1C1_GPIO		= 0,
+	GPIO1C1_UART1_TX,
+
+	GPIO1C0_SHIFT		= 0,
+	GPIO1C0_MASK		= 0xf << GPIO1C0_SHIFT,
+	GPIO1C0_GPIO		= 0,
+	GPIO1C0_UART1_RX,
+};
+
+/* GRF_GPIO1DL_IOMUX */
+enum {
+	GPIO1D3_SHIFT		= 12,
+	GPIO1D3_MASK		= 0xf << GPIO1D3_SHIFT,
+	GPIO1D3_GPIO		= 0,
+	GPIO1D3_SDMMC_D1,
+	GPIO1D3_UART2_RXM0,
+
+	GPIO1D2_SHIFT		= 8,
+	GPIO1D2_MASK		= 0xf << GPIO1D2_SHIFT,
+	GPIO1D2_GPIO		= 0,
+	GPIO1D2_SDMMC_D0,
+	GPIO1D2_UART2_TXM0,
+};
+
+/* GRF_GPIO1DH_IOMUX */
+enum {
+	GPIO1D7_SHIFT		= 12,
+	GPIO1D7_MASK		= 0xf << GPIO1D7_SHIFT,
+	GPIO1D7_GPIO		= 0,
+	GPIO1D7_SDMMC_CMD,
+
+	GPIO1D6_SHIFT		= 8,
+	GPIO1D6_MASK		= 0xf << GPIO1D6_SHIFT,
+	GPIO1D6_GPIO		= 0,
+	GPIO1D6_SDMMC_CLK,
+
+	GPIO1D5_SHIFT		= 4,
+	GPIO1D5_MASK		= 0xf << GPIO1D5_SHIFT,
+	GPIO1D5_GPIO		= 0,
+	GPIO1D5_SDMMC_D3,
+
+	GPIO1D4_SHIFT		= 0,
+	GPIO1D4_MASK		= 0xf << GPIO1D4_SHIFT,
+	GPIO1D4_GPIO		= 0,
+	GPIO1D4_SDMMC_D2,
+};
+
+/* GRF_GPIO2BH_IOMUX */
+enum {
+	GPIO2B6_SHIFT		= 8,
+	GPIO2B6_MASK		= 0xf << GPIO2B6_SHIFT,
+	GPIO2B6_GPIO		= 0,
+	GPIO2B6_CIF_D1M0,
+	GPIO2B6_UART2_RXM1,
+
+	GPIO2B4_SHIFT		= 0,
+	GPIO2B4_MASK		= 0xf << GPIO2B4_SHIFT,
+	GPIO2B4_GPIO		= 0,
+	GPIO2B4_CIF_D0M0,
+	GPIO2B4_UART2_TXM1,
+};
+
+/* GRF_GPIO3AL_IOMUX */
+enum {
+	GPIO3A2_SHIFT		= 8,
+	GPIO3A2_MASK		= 0xf << GPIO3A2_SHIFT,
+	GPIO3A2_GPIO		= 0,
+	GPIO3A2_UART5_TX	= 4,
+
+	GPIO3A1_SHIFT		= 4,
+	GPIO3A1_MASK		= 0xf << GPIO3A1_SHIFT,
+	GPIO3A1_GPIO		= 0,
+	GPIO3A1_UART5_RX	= 4,
+};
+
+/* PMUGRF_GPIO0CL_IOMUX */
+enum {
+	GPIO0C1_SHIFT		= 2,
+	GPIO0C1_MASK		= 0x3 << GPIO0C1_SHIFT,
+	GPIO0C1_GPIO		= 0,
+	GPIO0C1_PWM_3,
+	GPIO0C1_UART3_RXM0,
+	GPIO0C1_PMU_DEBUG4,
+
+	GPIO0C0_SHIFT		= 0,
+	GPIO0C0_MASK		= 0x3 << GPIO0C0_SHIFT,
+	GPIO0C0_GPIO		= 0,
+	GPIO0C0_PWM_1,
+	GPIO0C0_UART3_TXM0,
+	GPIO0C0_PMU_DEBUG3,
+};
+
+int arch_cpu_init(void)
+{
+	static struct px30_grf * const grf = (void *)GRF_BASE;
+	u32 __maybe_unused val;
+
+#ifdef CONFIG_SPL_BUILD
+	/* We do some SoC one time setting here. */
+	/* Disable the ddr secure region setting to make it non-secure */
+	writel(0x0, DDR_FW_BASE + FW_DDR_CON);
+
+	/* Set cpu qos priority */
+	writel(QOS_PRIORITY_LEVEL(1, 1), SERVICE_CORE_ADDR + QOS_PRIORITY);
+
+#if !defined(CONFIG_DEBUG_UART_BOARD_INIT) || \
+	(CONFIG_DEBUG_UART_BASE != 0xff160000) || \
+	(CONFIG_DEBUG_UART_CHANNEL != 0)
+	/* fix sdmmc pinmux if not using uart2-channel0 as debug uart */
+	rk_clrsetreg(&grf->gpio1dl_iomux,
+		     GPIO1D3_MASK | GPIO1D2_MASK,
+		     GPIO1D3_SDMMC_D1 << GPIO1D3_SHIFT |
+		     GPIO1D2_SDMMC_D0 << GPIO1D2_SHIFT);
+	rk_clrsetreg(&grf->gpio1dh_iomux,
+		     GPIO1D7_MASK | GPIO1D6_MASK | GPIO1D5_MASK | GPIO1D4_MASK,
+		     GPIO1D7_SDMMC_CMD << GPIO1D7_SHIFT |
+		     GPIO1D6_SDMMC_CLK << GPIO1D6_SHIFT |
+		     GPIO1D5_SDMMC_D3 << GPIO1D5_SHIFT |
+		     GPIO1D4_SDMMC_D2 << GPIO1D4_SHIFT);
+#endif
+
+#endif
+
+	/* Enable PD_VO (default disable at reset) */
+	rk_clrreg(PMU_PWRDN_CON, 1 << 13);
+
+	/* Disable video phy bandgap by default */
+	writel(0x82, VIDEO_PHY_BASE + 0x0000);
+	writel(0x05, VIDEO_PHY_BASE + 0x03ac);
+
+	/* Clear the force_jtag */
+	rk_clrreg(&grf->cpu_con[1], 1 << 7);
+
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+#if defined(CONFIG_DEBUG_UART_BASE) && \
+	(CONFIG_DEBUG_UART_BASE == 0xff168000) && \
+	(CONFIG_DEBUG_UART_CHANNEL != 1)
+	static struct px30_pmugrf * const pmugrf = (void *)PMUGRF_BASE;
+#endif
+	static struct px30_grf * const grf = (void *)GRF_BASE;
+	static struct px30_cru * const cru = (void *)CRU_BASE;
+
+#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff158000)
+	/* uart_sel_clk default select 24MHz */
+	rk_clrsetreg(&cru->clksel_con[34],
+		     UART1_PLL_SEL_MASK | UART1_DIV_CON_MASK,
+		     UART1_PLL_SEL_24M << UART1_PLL_SEL_SHIFT | 0);
+	rk_clrsetreg(&cru->clksel_con[35],
+		     UART1_CLK_SEL_MASK,
+		     UART1_CLK_SEL_UART1 << UART1_CLK_SEL_SHIFT);
+
+	rk_clrsetreg(&grf->gpio1cl_iomux,
+		     GPIO1C1_MASK | GPIO1C0_MASK,
+		     GPIO1C1_UART1_TX << GPIO1C1_SHIFT |
+		     GPIO1C0_UART1_RX << GPIO1C0_SHIFT);
+#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff168000)
+	/* GRF_IOFUNC_CON0 */
+	enum {
+		CON_IOMUX_UART3SEL_SHIFT	= 9,
+		CON_IOMUX_UART3SEL_MASK = 1 << CON_IOMUX_UART3SEL_SHIFT,
+		CON_IOMUX_UART3SEL_M0	= 0,
+		CON_IOMUX_UART3SEL_M1,
+	};
+
+	/* uart_sel_clk default select 24MHz */
+	rk_clrsetreg(&cru->clksel_con[40],
+		     UART3_PLL_SEL_MASK | UART3_DIV_CON_MASK,
+		     UART3_PLL_SEL_24M << UART3_PLL_SEL_SHIFT | 0);
+	rk_clrsetreg(&cru->clksel_con[41],
+		     UART3_CLK_SEL_MASK,
+		     UART3_CLK_SEL_UART3 << UART3_CLK_SEL_SHIFT);
+
+#if (CONFIG_DEBUG_UART_CHANNEL == 1)
+	rk_clrsetreg(&grf->iofunc_con0,
+		     CON_IOMUX_UART3SEL_MASK,
+		     CON_IOMUX_UART3SEL_M1 << CON_IOMUX_UART3SEL_SHIFT);
+
+	rk_clrsetreg(&grf->gpio1bh_iomux,
+		     GPIO1B7_MASK | GPIO1B6_MASK,
+		     GPIO1B7_UART3_RXM1 << GPIO1B7_SHIFT |
+		     GPIO1B6_UART3_TXM1 << GPIO1B6_SHIFT);
+#else
+	rk_clrsetreg(&grf->iofunc_con0,
+		     CON_IOMUX_UART3SEL_MASK,
+		     CON_IOMUX_UART3SEL_M0 << CON_IOMUX_UART3SEL_SHIFT);
+
+	rk_clrsetreg(&pmugrf->gpio0cl_iomux,
+		     GPIO0C1_MASK | GPIO0C0_MASK,
+		     GPIO0C1_UART3_RXM0 << GPIO0C1_SHIFT |
+		     GPIO0C0_UART3_TXM0 << GPIO0C0_SHIFT);
+#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
+
+#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff178000)
+	/* uart_sel_clk default select 24MHz */
+	rk_clrsetreg(&cru->clksel_con[46],
+		     UART5_PLL_SEL_MASK | UART5_DIV_CON_MASK,
+		     UART5_PLL_SEL_24M << UART5_PLL_SEL_SHIFT | 0);
+	rk_clrsetreg(&cru->clksel_con[47],
+		     UART5_CLK_SEL_MASK,
+		     UART5_CLK_SEL_UART5 << UART5_CLK_SEL_SHIFT);
+
+	rk_clrsetreg(&grf->gpio3al_iomux,
+		     GPIO3A2_MASK | GPIO3A1_MASK,
+		     GPIO3A2_UART5_TX << GPIO3A2_SHIFT |
+		     GPIO3A1_UART5_RX << GPIO3A1_SHIFT);
+#else
+	/* GRF_IOFUNC_CON0 */
+	enum {
+		CON_IOMUX_UART2SEL_SHIFT	= 10,
+		CON_IOMUX_UART2SEL_MASK = 3 << CON_IOMUX_UART2SEL_SHIFT,
+		CON_IOMUX_UART2SEL_M0	= 0,
+		CON_IOMUX_UART2SEL_M1,
+		CON_IOMUX_UART2SEL_USBPHY,
+	};
+
+	/* uart_sel_clk default select 24MHz */
+	rk_clrsetreg(&cru->clksel_con[37],
+		     UART2_PLL_SEL_MASK | UART2_DIV_CON_MASK,
+		     UART2_PLL_SEL_24M << UART2_PLL_SEL_SHIFT | 0);
+	rk_clrsetreg(&cru->clksel_con[38],
+		     UART2_CLK_SEL_MASK,
+		     UART2_CLK_SEL_UART2 << UART2_CLK_SEL_SHIFT);
+
+#if (CONFIG_DEBUG_UART_CHANNEL == 1)
+	/* Enable early UART2 */
+	rk_clrsetreg(&grf->iofunc_con0,
+		     CON_IOMUX_UART2SEL_MASK,
+		     CON_IOMUX_UART2SEL_M1 << CON_IOMUX_UART2SEL_SHIFT);
+
+	rk_clrsetreg(&grf->gpio2bh_iomux,
+		     GPIO2B6_MASK | GPIO2B4_MASK,
+		     GPIO2B6_UART2_RXM1 << GPIO2B6_SHIFT |
+		     GPIO2B4_UART2_TXM1 << GPIO2B4_SHIFT);
+#else
+	rk_clrsetreg(&grf->iofunc_con0,
+		     CON_IOMUX_UART2SEL_MASK,
+		     CON_IOMUX_UART2SEL_M0 << CON_IOMUX_UART2SEL_SHIFT);
+
+	rk_clrsetreg(&grf->gpio1dl_iomux,
+		     GPIO1D3_MASK | GPIO1D2_MASK,
+		     GPIO1D3_UART2_RXM0 << GPIO1D3_SHIFT |
+		     GPIO1D2_UART2_TXM0 << GPIO1D2_SHIFT);
+#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
+
+#endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */
+}
+#endif /* CONFIG_DEBUG_UART_BOARD_INIT */
diff --git a/roms/u-boot/arch/arm/mach-rockchip/px30/syscon_px30.c b/roms/u-boot/arch/arm/mach-rockchip/px30/syscon_px30.c
new file mode 100644
index 000000000..37e88f5cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/px30/syscon_px30.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id px30_syscon_ids[] = {
+	{ .compatible = "rockchip,px30-pmu", .data = ROCKCHIP_SYSCON_PMU },
+	{ .compatible = "rockchip,px30-pmugrf", .data = ROCKCHIP_SYSCON_PMUGRF },
+	{ .compatible = "rockchip,px30-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_px30) = {
+	.id = UCLASS_SYSCON,
+	.name = "px30_syscon",
+	.of_match = px30_syscon_ids,
+};
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+static int px30_syscon_bind_of_plat(struct udevice *dev)
+{
+	dev->driver_data = dev->driver->of_match->data;
+	debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(rockchip_px30_pmu) = {
+	.name = "rockchip_px30_pmu",
+	.id = UCLASS_SYSCON,
+	.of_match = px30_syscon_ids,
+	.bind = px30_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_px30_pmugrf) = {
+	.name = "rockchip_px30_pmugrf",
+	.id = UCLASS_SYSCON,
+	.of_match = px30_syscon_ids + 1,
+	.bind = px30_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_px30_grf) = {
+	.name = "rockchip_px30_grf",
+	.id = UCLASS_SYSCON,
+	.of_match = px30_syscon_ids + 2,
+	.bind = px30_syscon_bind_of_plat,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3036-board-spl.c b/roms/u-boot/arch/arm/mach-rockchip/rk3036-board-spl.c
new file mode 100644
index 000000000..6eb89e15b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3036-board-spl.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015-2019 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/sdram_rk3036.h>
+
+#define TIMER_LOAD_COUNT_L	0x00
+#define TIMER_LOAD_COUNT_H	0x04
+#define TIMER_CONTROL_REG	0x10
+#define TIMER_EN	0x1
+#define	TIMER_FMODE	(0 << 1)
+#define	TIMER_RMODE	(1 << 1)
+
+void rockchip_stimer_init(void)
+{
+	asm volatile("mcr p15, 0, %0, c14, c0, 0"
+		     : : "r"(COUNTER_FREQUENCY));
+
+	writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
+	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
+	       TIMER_CONTROL_REG);
+}
+
+void board_init_f(ulong dummy)
+{
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
+
+	/* Init secure timer */
+	rockchip_stimer_init();
+	/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
+	timer_init();
+
+	sdram_init();
+
+	/* return to maskrom */
+	back_to_bootrom(BROM_BOOT_NEXTSTAGE);
+}
+
+/* Place Holders */
+void board_init_r(gd_t *id, ulong dest_addr)
+{
+	/*
+	 * Function attribute is no-return
+	 * This Function never executes
+	 */
+	while (1)
+		;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3036/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk3036/Kconfig
new file mode 100644
index 000000000..51cd43b39
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3036/Kconfig
@@ -0,0 +1,31 @@
+if ROCKCHIP_RK3036
+
+choice
+	prompt "RK3036 board select"
+
+config TARGET_EVB_RK3036
+	bool "EVB_RK3036"
+	select BOARD_LATE_INIT
+
+config TARGET_KYLIN_RK3036
+	bool "KYLIN_RK3036"
+	select BOARD_LATE_INIT
+
+endchoice
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0x200081c8
+
+config SYS_SOC
+	default "rk3036"
+
+config SYS_MALLOC_F_LEN
+	default 0x400
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+source "board/rockchip/evb_rk3036/Kconfig"
+source "board/rockchip/kylin_rk3036/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3036/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk3036/Makefile
new file mode 100644
index 000000000..299fc5063
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3036/Makefile
@@ -0,0 +1,14 @@
+#
+# (C) Copyright 2015 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += clk_rk3036.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += syscon_rk3036.o
+endif
+
+obj-y += rk3036.o
+obj-y += sdram_rk3036.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3036/clk_rk3036.c b/roms/u-boot/arch/arm/mach-rockchip/rk3036/clk_rk3036.c
new file mode 100644
index 000000000..116dccd7b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3036/clk_rk3036.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rk3036.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk3036_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3036_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3036/rk3036.c b/roms/u-boot/arch/arm/mach-rockchip/rk3036/rk3036.c
new file mode 100644
index 000000000..0a072cf03
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3036/rk3036.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/grf_rk3036.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/sdram_rk3036.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+#define GRF_BASE	0x20008000
+	struct rk3036_grf * const grf = (void *)GRF_BASE;
+	enum {
+		GPIO1C3_SHIFT		= 6,
+		GPIO1C3_MASK		= 3 << GPIO1C3_SHIFT,
+		GPIO1C3_GPIO		= 0,
+		GPIO1C3_MMC0_D1,
+		GPIO1C3_UART2_SOUT,
+
+		GPIO1C2_SHIFT		= 4,
+		GPIO1C2_MASK		= 3 << GPIO1C2_SHIFT,
+		GPIO1C2_GPIO		= 0,
+		GPIO1C2_MMC0_D0,
+		GPIO1C2_UART2_SIN,
+	};
+	/*
+	 * NOTE: sd card and debug uart use same iomux in rk3036,
+	 * so if you enable uart,
+	 * you can not boot from sdcard
+	 */
+	rk_clrsetreg(&grf->gpio1c_iomux,
+		     GPIO1C3_MASK << GPIO1C3_SHIFT |
+		     GPIO1C2_MASK << GPIO1C2_SHIFT,
+		     GPIO1C3_UART2_SOUT << GPIO1C3_SHIFT |
+		     GPIO1C2_UART2_SIN << GPIO1C2_SHIFT);
+}
+#endif
+
+#if !CONFIG_IS_ENABLED(RAM)
+/*
+ * When CONFIG_RAM is enabled, the dram_init() function is implemented
+ * in sdram.c.
+ */
+int dram_init(void)
+{
+	gd->ram_size = sdram_size();
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c b/roms/u-boot/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c
new file mode 100644
index 000000000..6ae254e99
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ */
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/types.h>
+#include <asm/arch-rockchip/cru_rk3036.h>
+#include <asm/arch-rockchip/grf_rk3036.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/sdram_rk3036.h>
+#include <asm/arch-rockchip/uart.h>
+#include <linux/delay.h>
+
+/*
+ * we can not fit the code to access the device tree in SPL
+ * (due to 4K SRAM size limits), so these are hard-coded
+ */
+#define CRU_BASE	0x20000000
+#define GRF_BASE	0x20008000
+#define DDR_PHY_BASE	0x2000a000
+#define DDR_PCTL_BASE	0x20004000
+#define CPU_AXI_BUS_BASE	0x10128000
+
+struct rk3036_sdram_priv {
+	struct rk3036_cru *cru;
+	struct rk3036_grf *grf;
+	struct rk3036_ddr_phy *phy;
+	struct rk3036_ddr_pctl *pctl;
+	struct rk3036_service_sys *axi_bus;
+
+	/* ddr die config */
+	struct rk3036_ddr_config ddr_config;
+};
+
+/*
+ * use integer mode, dpll output 792MHz and ddr get 396MHz
+ * refdiv, fbdiv, postdiv1, postdiv2
+ */
+const struct pll_div dpll_init_cfg = {1, 66, 2, 1};
+
+/* 396Mhz ddr timing */
+const struct rk3036_ddr_timing ddr_timing = {0x18c,
+	{0x18c, 0xc8, 0x1f4, 0x27, 0x4e,
+	0x4, 0x8b, 0x06, 0x03, 0x0, 0x06, 0x05, 0x0f, 0x15, 0x06, 0x04, 0x04,
+	0x06, 0x04, 0x200, 0x03, 0x0a, 0x40, 0x2710, 0x01, 0x05, 0x05, 0x03,
+	0x0c, 0x28, 0x100, 0x0, 0x04, 0x0},
+	{{0x420, 0x42, 0x0, 0x0}, 0x01, 0x60},
+	{0x24717315} };
+
+/*
+ * [7:6]  bank(n:n bit bank)
+ * [5:4]  row(13+n)
+ * [3]    cs(0:1 cs, 1:2 cs)
+ * [2:1]  bank(n:n bit bank)
+ * [0]    col(10+n)
+ */
+const char ddr_cfg_2_rbc[] = {
+	((3 << 6) | (3 << 4) | (0 << 3) | (0 << 1) | 1),
+	((0 << 6) | (1 << 4) | (0 << 3) | (3 << 1) | 0),
+	((0 << 6) | (2 << 4) | (0 << 3) | (3 << 1) | 0),
+	((0 << 6) | (3 << 4) | (0 << 3) | (3 << 1) | 0),
+	((0 << 6) | (1 << 4) | (0 << 3) | (3 << 1) | 1),
+	((0 << 6) | (2 << 4) | (0 << 3) | (3 << 1) | 1),
+	((0 << 6) | (3 << 4) | (0 << 3) | (3 << 1) | 1),
+	((0 << 6) | (0 << 4) | (0 << 3) | (3 << 1) | 0),
+	((0 << 6) | (0 << 4) | (0 << 3) | (3 << 1) | 1),
+	((0 << 6) | (3 << 4) | (1 << 3) | (3 << 1) | 0),
+	((0 << 6) | (3 << 4) | (1 << 3) | (3 << 1) | 1),
+	((1 << 6) | (2 << 4) | (0 << 3) | (2 << 1) | 0),
+	((3 << 6) | (2 << 4) | (0 << 3) | (0 << 1) | 1),
+	((3 << 6) | (3 << 4) | (0 << 3) | (0 << 1) | 0),
+};
+
+/* DDRPHY REG */
+enum {
+	/* DDRPHY_REG1 */
+	SOFT_RESET_MASK				= 3,
+	SOFT_RESET_SHIFT			= 2,
+
+	/* DDRPHY_REG2 */
+	MEMORY_SELECT_DDR3			= 0 << 6,
+	DQS_SQU_CAL_NORMAL_MODE			= 0 << 1,
+	DQS_SQU_CAL_START			= 1 << 0,
+	DQS_SQU_NO_CAL				= 0 << 0,
+
+	/* DDRPHY_REG2A */
+	CMD_DLL_BYPASS				= 1 << 4,
+	CMD_DLL_BYPASS_DISABLE			= 0 << 4,
+	HIGH_8BIT_DLL_BYPASS			= 1 << 3,
+	HIGH_8BIT_DLL_BYPASS_DISABLE		= 0 << 3,
+	LOW_8BIT_DLL_BYPASS			= 1 << 2,
+	LOW_8BIT_DLL_BYPASS_DISABLE		= 0 << 2,
+
+	/* DDRPHY_REG19 */
+	CMD_FEEDBACK_ENABLE			= 1 << 5,
+	CMD_SLAVE_DLL_INVERSE_MODE		= 1 << 4,
+	CMD_SLAVE_DLL_NO_INVERSE_MODE		= 0 << 4,
+	CMD_SLAVE_DLL_ENALBE			= 1 << 3,
+	CMD_TX_SLAVE_DLL_DELAY_MASK		= 7,
+	CMD_TX_SLAVE_DLL_DELAY_SHIFT		= 0,
+
+	/* DDRPHY_REG6 */
+	LEFT_CHN_TX_DQ_PHASE_BYPASS_90		= 1 << 4,
+	LEFT_CHN_TX_DQ_PHASE_BYPASS_0		= 0 << 4,
+	LEFT_CHN_TX_DQ_DLL_ENABLE		= 1 << 3,
+	LEFT_CHN_TX_DQ_DLL_DELAY_MASK		= 7,
+	LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT		= 0,
+
+	/* DDRPHY_REG8 */
+	LEFT_CHN_RX_DQS_DELAY_TAP_MASK		= 3,
+	LEFT_CHN_RX_DQS_DELAY_TAP_SHIFT		= 0,
+
+	/* DDRPHY_REG9 */
+	RIGHT_CHN_TX_DQ_PHASE_BYPASS_90		= 1 << 4,
+	RIGHT_CHN_TX_DQ_PHASE_BYPASS_0		= 0 << 4,
+	RIGHT_CHN_TX_DQ_DLL_ENABLE		= 1 << 3,
+	RIGHT_CHN_TX_DQ_DLL_DELAY_MASK		= 7,
+	RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT		= 0,
+
+	/* DDRPHY_REG11 */
+	RIGHT_CHN_RX_DQS_DELAY_TAP_MASK		= 3,
+	RIGHT_CHN_RX_DQS_DELAY_TAP_SHIFT	= 0,
+
+	/* DDRPHY_REG62 */
+	CAL_DONE_MASK				= 3,
+	HIGH_8BIT_CAL_DONE			= 1 << 1,
+	LOW_8BIT_CAL_DONE			= 1 << 0,
+};
+
+/* PTCL */
+enum {
+	/* PCTL_DFISTCFG0 */
+	DFI_INIT_START			= 1 << 0,
+	DFI_DATA_BYTE_DISABLE_EN	= 1 << 2,
+
+	/* PCTL_DFISTCFG1 */
+	DFI_DRAM_CLK_SR_EN		= 1 << 0,
+	DFI_DRAM_CLK_DPD_EN		= 1 << 1,
+
+	/* PCTL_DFISTCFG2 */
+	DFI_PARITY_INTR_EN		= 1 << 0,
+	DFI_PARITY_EN			= 1 << 1,
+
+	/* PCTL_DFILPCFG0 */
+	TLP_RESP_TIME_SHIFT		= 16,
+	LP_SR_EN			= 1 << 8,
+	LP_PD_EN			= 1 << 0,
+
+	/* PCTL_DFIODTCFG */
+	RANK0_ODT_WRITE_SEL		= 1 << 3,
+	RANK1_ODT_WRITE_SEL		= 1 << 11,
+
+	/* PCTL_DFIODTCFG1 */
+	ODT_LEN_BL8_W_SHIFT		= 16,
+
+	/* PCTL_MCFG */
+	TFAW_CFG_MASK			= 3,
+	TFAW_CFG_SHIFT			= 18,
+	PD_EXIT_SLOW_MODE		= 0 << 17,
+	PD_ACTIVE_POWER_DOWN		= 1 << 16,
+	PD_IDLE_MASK			= 0xff,
+	PD_IDLE_SHIFT			= 8,
+	MEM_BL4				= 0 << 0,
+	MEM_BL8				= 1 << 0,
+
+	/* PCTL_MCFG1 */
+	HW_EXIT_IDLE_EN_MASK		= 1,
+	HW_EXIT_IDLE_EN_SHIFT		= 31,
+	SR_IDLE_MASK			= 0x1ff,
+	SR_IDLE_SHIFT			= 0,
+
+	/* PCTL_SCFG */
+	HW_LOW_POWER_EN			= 1 << 0,
+
+	/* PCTL_POWCTL */
+	POWER_UP_START			= 1 << 0,
+
+	/* PCTL_POWSTAT */
+	POWER_UP_DONE			= 1 << 0,
+
+	/* PCTL_MCMD */
+	START_CMD			= 1 << 31,
+	BANK_ADDR_MASK			= 7,
+	BANK_ADDR_SHIFT			= 17,
+	CMD_ADDR_MASK			= 0x1fff,
+	CMD_ADDR_SHIFT			= 4,
+	DESELECT_CMD			= 0,
+	PREA_CMD,
+	REF_CMD,
+	MRS_CMD,
+	ZQCS_CMD,
+	ZQCL_CMD,
+	RSTL_CMD,
+	MRR_CMD				= 8,
+
+	/* PCTL_STAT */
+	INIT_MEM			= 0,
+	CONFIG,
+	CONFIG_REQ,
+	ACCESS,
+	ACCESS_REQ,
+	LOW_POWER,
+	LOW_POWER_ENTRY_REQ,
+	LOW_POWER_EXIT_REQ,
+	PCTL_STAT_MASK			= 7,
+
+	/* PCTL_SCTL */
+	INIT_STATE			= 0,
+	CFG_STATE			= 1,
+	GO_STATE			= 2,
+	SLEEP_STATE			= 3,
+	WAKEUP_STATE			= 4,
+};
+
+/* GRF_SOC_CON2 */
+#define	MSCH4_MAINDDR3		(1 << 7)
+#define PHY_DRV_ODT_SET(n)	((n << 4) | n)
+#define DDR3_DLL_RESET		(1 << 8)
+
+/* CK pull up/down driver strength control */
+enum {
+	PHY_RON_DISABLE		= 0,
+	PHY_RON_309OHM		= 1,
+	PHY_RON_155OHM,
+	PHY_RON_103OHM		= 3,
+	PHY_RON_63OHM		= 5,
+	PHY_RON_45OHM		= 7,
+	PHY_RON_77OHM,
+	PHY_RON_62OHM,
+	PHY_RON_52OHM,
+	PHY_RON_44OHM,
+	PHY_RON_39OHM,
+	PHY_RON_34OHM,
+	PHY_RON_31OHM,
+	PHY_RON_28OHM,
+};
+
+/* DQ pull up/down control */
+enum {
+	PHY_RTT_DISABLE		= 0,
+	PHY_RTT_861OHM		= 1,
+	PHY_RTT_431OHM,
+	PHY_RTT_287OHM,
+	PHY_RTT_216OHM,
+	PHY_RTT_172OHM,
+	PHY_RTT_145OHM,
+	PHY_RTT_124OHM,
+	PHY_RTT_215OHM,
+	PHY_RTT_144OHM		= 0xa,
+	PHY_RTT_123OHM,
+	PHY_RTT_108OHM,
+	PHY_RTT_96OHM,
+	PHY_RTT_86OHM,
+	PHY_RTT_78OHM,
+};
+
+/* DQS squelch DLL delay */
+enum {
+	DQS_DLL_NO_DELAY	= 0,
+	DQS_DLL_22P5_DELAY,
+	DQS_DLL_45_DELAY,
+	DQS_DLL_67P5_DELAY,
+	DQS_DLL_90_DELAY,
+	DQS_DLL_112P5_DELAY,
+	DQS_DLL_135_DELAY,
+	DQS_DLL_157P5_DELAY,
+};
+
+/* GRF_OS_REG1 */
+enum {
+	/*
+	 * 000: lpddr
+	 * 001: ddr
+	 * 010: ddr2
+	 * 011: ddr3
+	 * 100: lpddr2-s2
+	 * 101: lpddr2-s4
+	 * 110: lpddr3
+	 */
+	DDR_TYPE_MASK		= 7,
+	DDR_TYPE_SHIFT		= 13,
+
+	/* 0: 1 chn, 1: 2 chn */
+	DDR_CHN_CNT_SHIFT	= 12,
+
+	/* 0: 1 rank, 1: 2 rank */
+	DDR_RANK_CNT_MASK	= 1,
+	DDR_RANK_CNT_SHIFT	= 11,
+
+	/*
+	 * 00: 9col
+	 * 01: 10col
+	 * 10: 11col
+	 * 11: 12col
+	 */
+	DDR_COL_MASK		= 3,
+	DDR_COL_SHIFT		= 9,
+
+	/* 0: 8 bank, 1: 4 bank*/
+	DDR_BANK_MASK		= 1,
+	DDR_BANK_SHIFT		= 8,
+
+	/*
+	 * 00: 13 row
+	 * 01: 14 row
+	 * 10: 15 row
+	 * 11: 16 row
+	 */
+	DDR_CS0_ROW_MASK	= 3,
+	DDR_CS0_ROW_SHIFT	= 6,
+	DDR_CS1_ROW_MASK	= 3,
+	DDR_CS1_ROW_SHIFT	= 4,
+
+	/*
+	 * 00: 32 bit
+	 * 01: 16 bit
+	 * 10: 8 bit
+	 * rk3036 only support 16bit
+	 */
+	DDR_BW_MASK		= 3,
+	DDR_BW_SHIFT		= 2,
+	DDR_DIE_BW_MASK		= 3,
+	DDR_DIE_BW_SHIFT	= 0,
+};
+
+static void rkdclk_init(struct rk3036_sdram_priv *priv)
+{
+	struct rk3036_pll *pll = &priv->cru->pll[1];
+
+	/* pll enter slow-mode */
+	rk_clrsetreg(&priv->cru->cru_mode_con, DPLL_MODE_MASK,
+		     DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
+
+	/* use integer mode */
+	rk_setreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
+
+	rk_clrsetreg(&pll->con0,
+		     PLL_POSTDIV1_MASK | PLL_FBDIV_MASK,
+		     (dpll_init_cfg.postdiv1 << PLL_POSTDIV1_SHIFT) |
+			dpll_init_cfg.fbdiv);
+	rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK | PLL_REFDIV_MASK,
+		     (dpll_init_cfg.postdiv2 << PLL_POSTDIV2_SHIFT |
+		      dpll_init_cfg.refdiv << PLL_REFDIV_SHIFT));
+
+	/* waiting for pll lock */
+	while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT))
+		udelay(1);
+
+	/* PLL enter normal-mode */
+	rk_clrsetreg(&priv->cru->cru_mode_con, DPLL_MODE_MASK,
+		     DPLL_MODE_NORM << DPLL_MODE_SHIFT);
+}
+
+static void copy_to_reg(u32 *dest, const u32 *src, u32 n)
+{
+	int i;
+
+	for (i = 0; i < n / sizeof(u32); i++) {
+		writel(*src, dest);
+		src++;
+		dest++;
+	}
+}
+
+void phy_pctrl_reset(struct rk3036_sdram_priv *priv)
+{
+	struct rk3036_ddr_phy *ddr_phy = priv->phy;
+
+	rk_clrsetreg(&priv->cru->cru_softrst_con[5], 1 << DDRCTRL_PSRST_SHIFT |
+			1 << DDRCTRL_SRST_SHIFT | 1 << DDRPHY_PSRST_SHIFT |
+			1 << DDRPHY_SRST_SHIFT,
+			1 << DDRCTRL_PSRST_SHIFT | 1 << DDRCTRL_SRST_SHIFT |
+			1 << DDRPHY_PSRST_SHIFT | 1 << DDRPHY_SRST_SHIFT);
+
+	udelay(10);
+
+	rk_clrreg(&priv->cru->cru_softrst_con[5], 1 << DDRPHY_PSRST_SHIFT |
+						  1 << DDRPHY_SRST_SHIFT);
+	udelay(10);
+
+	rk_clrreg(&priv->cru->cru_softrst_con[5], 1 << DDRCTRL_PSRST_SHIFT |
+						  1 << DDRCTRL_SRST_SHIFT);
+	udelay(10);
+
+	clrsetbits_le32(&ddr_phy->ddrphy_reg1,
+			SOFT_RESET_MASK << SOFT_RESET_SHIFT,
+			0 << SOFT_RESET_SHIFT);
+	udelay(10);
+	clrsetbits_le32(&ddr_phy->ddrphy_reg1,
+			SOFT_RESET_MASK << SOFT_RESET_SHIFT,
+			3 << SOFT_RESET_SHIFT);
+
+	udelay(1);
+}
+
+void phy_dll_bypass_set(struct rk3036_sdram_priv *priv, unsigned int freq)
+{
+	struct rk3036_ddr_phy *ddr_phy = priv->phy;
+
+	if (freq < ddr_timing.freq) {
+		writel(CMD_DLL_BYPASS | HIGH_8BIT_DLL_BYPASS |
+			LOW_8BIT_DLL_BYPASS, &ddr_phy->ddrphy_reg2a);
+
+		writel(LEFT_CHN_TX_DQ_PHASE_BYPASS_90 |
+			LEFT_CHN_TX_DQ_DLL_ENABLE |
+			(0 & LEFT_CHN_TX_DQ_DLL_DELAY_MASK) <<
+			 LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT, &ddr_phy->ddrphy_reg6);
+
+		writel(RIGHT_CHN_TX_DQ_PHASE_BYPASS_90 |
+			RIGHT_CHN_TX_DQ_DLL_ENABLE |
+			(0 & RIGHT_CHN_TX_DQ_DLL_DELAY_MASK) <<
+			 RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT,
+			&ddr_phy->ddrphy_reg9);
+	} else {
+		writel(CMD_DLL_BYPASS_DISABLE | HIGH_8BIT_DLL_BYPASS_DISABLE |
+			LOW_8BIT_DLL_BYPASS_DISABLE, &ddr_phy->ddrphy_reg2a);
+
+		writel(LEFT_CHN_TX_DQ_PHASE_BYPASS_0 |
+			LEFT_CHN_TX_DQ_DLL_ENABLE |
+			(4 & LEFT_CHN_TX_DQ_DLL_DELAY_MASK) <<
+			 LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT,
+			&ddr_phy->ddrphy_reg6);
+
+		writel(RIGHT_CHN_TX_DQ_PHASE_BYPASS_0 |
+			RIGHT_CHN_TX_DQ_DLL_ENABLE |
+			(4 & RIGHT_CHN_TX_DQ_DLL_DELAY_MASK) <<
+			 RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT,
+			&ddr_phy->ddrphy_reg9);
+	}
+
+	writel(CMD_SLAVE_DLL_NO_INVERSE_MODE | CMD_SLAVE_DLL_ENALBE |
+			(0 & CMD_TX_SLAVE_DLL_DELAY_MASK) <<
+			CMD_TX_SLAVE_DLL_DELAY_SHIFT, &ddr_phy->ddrphy_reg19);
+
+	/* 45 degree delay */
+	writel((DQS_DLL_45_DELAY & LEFT_CHN_RX_DQS_DELAY_TAP_MASK) <<
+		LEFT_CHN_RX_DQS_DELAY_TAP_SHIFT, &ddr_phy->ddrphy_reg8);
+	writel((DQS_DLL_45_DELAY & RIGHT_CHN_RX_DQS_DELAY_TAP_MASK) <<
+		RIGHT_CHN_RX_DQS_DELAY_TAP_SHIFT, &ddr_phy->ddrphy_reg11);
+}
+
+static void send_command(struct rk3036_ddr_pctl *pctl,
+			 u32 rank, u32 cmd, u32 arg)
+{
+	writel((START_CMD | (rank << 20) | arg | cmd), &pctl->mcmd);
+	udelay(1);
+	while (readl(&pctl->mcmd) & START_CMD)
+		;
+}
+
+static void memory_init(struct rk3036_sdram_priv *priv)
+{
+	struct rk3036_ddr_pctl *pctl = priv->pctl;
+
+	send_command(pctl, 3, DESELECT_CMD, 0);
+	udelay(1);
+	send_command(pctl, 3, PREA_CMD, 0);
+	send_command(pctl, 3, MRS_CMD,
+		     (0x02 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
+		     (ddr_timing.phy_timing.mr[2] & CMD_ADDR_MASK) <<
+		     CMD_ADDR_SHIFT);
+
+	send_command(pctl, 3, MRS_CMD,
+		     (0x03 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
+		     (ddr_timing.phy_timing.mr[3] & CMD_ADDR_MASK) <<
+		     CMD_ADDR_SHIFT);
+
+	send_command(pctl, 3, MRS_CMD,
+		     (0x01 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
+		     (ddr_timing.phy_timing.mr[1] & CMD_ADDR_MASK) <<
+		     CMD_ADDR_SHIFT);
+
+	send_command(pctl, 3, MRS_CMD,
+		     (0x00 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
+		     (ddr_timing.phy_timing.mr[0] & CMD_ADDR_MASK) <<
+		     CMD_ADDR_SHIFT | DDR3_DLL_RESET);
+
+	send_command(pctl, 3, ZQCL_CMD, 0);
+}
+
+static void data_training(struct rk3036_sdram_priv *priv)
+{
+	struct rk3036_ddr_phy *ddr_phy = priv->phy;
+	struct rk3036_ddr_pctl *pctl = priv->pctl;
+	u32 value;
+
+	/* disable auto refresh */
+	value = readl(&pctl->trefi),
+	writel(0, &pctl->trefi);
+
+	clrsetbits_le32(&ddr_phy->ddrphy_reg2, 0x03,
+			DQS_SQU_CAL_NORMAL_MODE | DQS_SQU_CAL_START);
+
+	udelay(1);
+	while ((readl(&ddr_phy->ddrphy_reg62) & CAL_DONE_MASK) !=
+		(HIGH_8BIT_CAL_DONE | LOW_8BIT_CAL_DONE)) {
+		;
+	}
+
+	clrsetbits_le32(&ddr_phy->ddrphy_reg2, 0x03,
+			DQS_SQU_CAL_NORMAL_MODE | DQS_SQU_NO_CAL);
+
+	/*
+	 * since data training will take about 20us, so send some auto
+	 * refresh(about 7.8us) to complement the lost time
+	 */
+	send_command(pctl, 3, REF_CMD, 0);
+	send_command(pctl, 3, REF_CMD, 0);
+	send_command(pctl, 3, REF_CMD, 0);
+
+	writel(value, &pctl->trefi);
+}
+
+static void move_to_config_state(struct rk3036_sdram_priv *priv)
+{
+	unsigned int state;
+	struct rk3036_ddr_pctl *pctl = priv->pctl;
+
+	while (1) {
+		state = readl(&pctl->stat) & PCTL_STAT_MASK;
+		switch (state) {
+		case LOW_POWER:
+			writel(WAKEUP_STATE, &pctl->sctl);
+			while ((readl(&pctl->stat) & PCTL_STAT_MASK)
+				!= ACCESS)
+				;
+			/*
+			 * If at low power state, need wakeup first, and then
+			 * enter the config, so fallthrough
+			 */
+		case ACCESS:
+			/* fallthrough */
+		case INIT_MEM:
+			writel(CFG_STATE, &pctl->sctl);
+			while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG)
+				;
+			break;
+		case CONFIG:
+			return;
+		default:
+			break;
+		}
+	}
+}
+
+static void move_to_access_state(struct rk3036_sdram_priv *priv)
+{
+	unsigned int state;
+	struct rk3036_ddr_pctl *pctl = priv->pctl;
+
+	while (1) {
+		state = readl(&pctl->stat) & PCTL_STAT_MASK;
+		switch (state) {
+		case LOW_POWER:
+			writel(WAKEUP_STATE, &pctl->sctl);
+			while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS)
+				;
+			break;
+		case INIT_MEM:
+			writel(CFG_STATE, &pctl->sctl);
+			while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG)
+				;
+			/* fallthrough */
+		case CONFIG:
+			writel(GO_STATE, &pctl->sctl);
+			while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS)
+				;
+			break;
+		case ACCESS:
+			return;
+		default:
+			break;
+		}
+	}
+}
+
+static void pctl_cfg(struct rk3036_sdram_priv *priv)
+{
+	struct rk3036_ddr_pctl *pctl = priv->pctl;
+	u32 burst_len;
+	u32 reg;
+
+	writel(DFI_INIT_START | DFI_DATA_BYTE_DISABLE_EN, &pctl->dfistcfg0);
+	writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN, &pctl->dfistcfg1);
+	writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2);
+	writel(7 << TLP_RESP_TIME_SHIFT | LP_SR_EN | LP_PD_EN,
+	       &pctl->dfilpcfg0);
+
+	writel(1, &pctl->dfitphyupdtype0);
+	writel(0x0d, &pctl->dfitphyrdlat);
+
+	/* cs0 and cs1 write odt enable */
+	writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL),
+	       &pctl->dfiodtcfg);
+
+	/* odt write length */
+	writel(7 << ODT_LEN_BL8_W_SHIFT, &pctl->dfiodtcfg1);
+
+	/* phyupd and ctrlupd disabled */
+	writel(0, &pctl->dfiupdcfg);
+
+	if ((ddr_timing.noc_timing.burstlen << 1) == 4)
+		burst_len = MEM_BL4;
+	else
+		burst_len = MEM_BL8;
+
+	copy_to_reg(&pctl->togcnt1u, &ddr_timing.pctl_timing.togcnt1u,
+		    sizeof(struct rk3036_pctl_timing));
+	reg = readl(&pctl->tcl);
+	writel(reg - 3, &pctl->dfitrddataen);
+	reg = readl(&pctl->tcwl);
+	writel(reg - 1, &pctl->dfitphywrlat);
+
+	writel(burst_len | (1 & TFAW_CFG_MASK) << TFAW_CFG_SHIFT |
+			PD_EXIT_SLOW_MODE | PD_ACTIVE_POWER_DOWN |
+			(0 & PD_IDLE_MASK) << PD_IDLE_SHIFT,
+			&pctl->mcfg);
+
+	writel(RK_SETBITS(MSCH4_MAINDDR3), &priv->grf->soc_con2);
+	setbits_le32(&pctl->scfg, HW_LOW_POWER_EN);
+}
+
+static void phy_cfg(struct rk3036_sdram_priv *priv)
+{
+	struct rk3036_ddr_phy *ddr_phy = priv->phy;
+	struct rk3036_service_sys *axi_bus = priv->axi_bus;
+
+	writel(ddr_timing.noc_timing.noc_timing, &axi_bus->ddrtiming);
+	writel(0x3f, &axi_bus->readlatency);
+
+	writel(MEMORY_SELECT_DDR3 | DQS_SQU_CAL_NORMAL_MODE,
+	       &ddr_phy->ddrphy_reg2);
+
+	clrsetbits_le32(&ddr_phy->ddrphy_reg3, 1, ddr_timing.phy_timing.bl);
+	writel(ddr_timing.phy_timing.cl_al, &ddr_phy->ddrphy_reg4a);
+	writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg16);
+	writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg22);
+	writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg25);
+	writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg26);
+	writel(PHY_DRV_ODT_SET(PHY_RTT_216OHM), &ddr_phy->ddrphy_reg27);
+	writel(PHY_DRV_ODT_SET(PHY_RTT_216OHM), &ddr_phy->ddrphy_reg28);
+}
+
+void dram_cfg_rbc(struct rk3036_sdram_priv *priv)
+{
+	char noc_config;
+	int i = 0;
+	struct rk3036_ddr_config config = priv->ddr_config;
+	struct rk3036_service_sys *axi_bus = priv->axi_bus;
+
+	move_to_config_state(priv);
+
+	/* 2bit in BIT1, 2 */
+	if (config.rank == 2) {
+		noc_config = (config.cs0_row - 13) << 4 | config.bank << 1 |
+			      1 << 3 | (config.col - 10);
+		if (noc_config == ddr_cfg_2_rbc[9]) {
+			i = 9;
+			goto finish;
+		} else if (noc_config == ddr_cfg_2_rbc[10]) {
+			i = 10;
+			goto finish;
+		}
+	}
+
+	noc_config = (config.cs0_row - 13) << 4 | config.bank << 1 |
+			(config.col - 10);
+
+	for (i = 0; i < sizeof(ddr_cfg_2_rbc); i++) {
+		if (noc_config == ddr_cfg_2_rbc[i])
+			goto finish;
+	}
+
+	/* bank: 1 bit in BIT6,7, 1bit in BIT1, 2 */
+	noc_config = 1 << 6 | (config.cs0_row - 13) << 4 |
+			2 << 1 | (config.col - 10);
+	if (noc_config == ddr_cfg_2_rbc[11]) {
+		i = 11;
+		goto finish;
+	}
+
+	/* bank: 2bit in BIT6,7 */
+	noc_config = (config.bank << 6) | (config.cs0_row - 13) << 4 |
+			(config.col - 10);
+
+	if (noc_config == ddr_cfg_2_rbc[0])
+		i = 0;
+	else if (noc_config == ddr_cfg_2_rbc[12])
+		i = 12;
+	else if (noc_config == ddr_cfg_2_rbc[13])
+		i = 13;
+finish:
+	writel(i, &axi_bus->ddrconf);
+	move_to_access_state(priv);
+}
+
+static void sdram_all_config(struct rk3036_sdram_priv *priv)
+{
+	u32 os_reg = 0;
+	u32 cs1_row = 0;
+	struct rk3036_ddr_config config = priv->ddr_config;
+
+	if (config.rank > 1)
+		cs1_row = config.cs1_row - 13;
+
+	os_reg = config.ddr_type << DDR_TYPE_SHIFT |
+			0 << DDR_CHN_CNT_SHIFT |
+			(config.rank - 1) << DDR_RANK_CNT_SHIFT |
+			(config.col - 9) << DDR_COL_SHIFT |
+			(config.bank == 3 ? 0 : 1) << DDR_BANK_SHIFT |
+			(config.cs0_row - 13) << DDR_CS0_ROW_SHIFT |
+			cs1_row << DDR_CS1_ROW_SHIFT |
+			1 << DDR_BW_SHIFT |
+			(2 >> config.bw) << DDR_DIE_BW_SHIFT;
+	writel(os_reg, &priv->grf->os_reg[1]);
+}
+
+size_t sdram_size(void)
+{
+	u32 size, os_reg, cs0_row, cs1_row, col, bank, rank;
+	struct rk3036_grf *grf = (void *)GRF_BASE;
+
+	os_reg = readl(&grf->os_reg[1]);
+
+	cs0_row = 13 + ((os_reg >> DDR_CS0_ROW_SHIFT) & DDR_CS0_ROW_MASK);
+	cs1_row = 13 + ((os_reg >> DDR_CS1_ROW_SHIFT) & DDR_CS1_ROW_MASK);
+	col = 9 + ((os_reg >> DDR_COL_SHIFT) & DDR_COL_MASK);
+	bank = 3 - ((os_reg >> DDR_BANK_SHIFT) & DDR_BANK_MASK);
+	rank = 1 + ((os_reg >> DDR_RANK_CNT_SHIFT) & DDR_RANK_CNT_MASK);
+
+	/* row + col + bank + bw(rk3036 only support 16bit, so fix in 1) */
+	size = 1 << (cs0_row + col + bank + 1);
+
+	if (rank > 1)
+		size += size >> (cs0_row - cs1_row);
+
+	return size;
+}
+
+void sdram_init(void)
+{
+	struct rk3036_sdram_priv sdram_priv;
+
+	sdram_priv.cru = (void *)CRU_BASE;
+	sdram_priv.grf = (void *)GRF_BASE;
+	sdram_priv.phy = (void *)DDR_PHY_BASE;
+	sdram_priv.pctl = (void *)DDR_PCTL_BASE;
+	sdram_priv.axi_bus = (void *)CPU_AXI_BUS_BASE;
+
+	get_ddr_config(&sdram_priv.ddr_config);
+	sdram_all_config(&sdram_priv);
+	rkdclk_init(&sdram_priv);
+	phy_pctrl_reset(&sdram_priv);
+	phy_dll_bypass_set(&sdram_priv, ddr_timing.freq);
+	pctl_cfg(&sdram_priv);
+	phy_cfg(&sdram_priv);
+	writel(POWER_UP_START, &sdram_priv.pctl->powctl);
+	while (!(readl(&sdram_priv.pctl->powstat) & POWER_UP_DONE))
+		;
+	memory_init(&sdram_priv);
+	move_to_config_state(&sdram_priv);
+	data_training(&sdram_priv);
+	move_to_access_state(&sdram_priv);
+	dram_cfg_rbc(&sdram_priv);
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3036/syscon_rk3036.c b/roms/u-boot/arch/arm/mach-rockchip/rk3036/syscon_rk3036.c
new file mode 100644
index 000000000..c2fd16079
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3036/syscon_rk3036.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk3036_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3036-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3036) = {
+	.name = "rk3036_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3036_syscon_ids,
+};
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3128/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk3128/Kconfig
new file mode 100644
index 000000000..b867401c7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3128/Kconfig
@@ -0,0 +1,27 @@
+if ROCKCHIP_RK3128
+
+choice
+	prompt "RK3128 board select"
+
+config TARGET_EVB_RK3128
+	bool "RK3128 evaluation board"
+	select BOARD_LATE_INIT
+	help
+	  RK3128evb is a evaluation board for Rockchip rk3128,
+	  with full function and phisical connectors support like
+	  usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
+
+endchoice
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0x100a0038
+
+config SYS_SOC
+	default "rk3128"
+
+config SYS_MALLOC_F_LEN
+	default 0x0800
+
+source "board/rockchip/evb_rk3128/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3128/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk3128/Makefile
new file mode 100644
index 000000000..50e111754
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3128/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2017 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += rk3128.o
+obj-y += syscon_rk3128.o
+obj-y += clk_rk3128.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3128/clk_rk3128.c b/roms/u-boot/arch/arm/mach-rockchip/rk3128/clk_rk3128.c
new file mode 100644
index 000000000..a1b038c64
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3128/clk_rk3128.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rk3128.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk3128_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3128_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3128/rk3128.c b/roms/u-boot/arch/arm/mach-rockchip/rk3128/rk3128.c
new file mode 100644
index 000000000..01dbfa75c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3128/rk3128.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co., Ltd
+ */
+#include <common.h>
+#include <init.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int arch_cpu_init(void)
+{
+	/* We do some SoC one time setting here. */
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3128/syscon_rk3128.c b/roms/u-boot/arch/arm/mach-rockchip/rk3128/syscon_rk3128.c
new file mode 100644
index 000000000..1406d5d0d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3128/syscon_rk3128.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk3128_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3128-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3128) = {
+	.name = "rk3128_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3128_syscon_ids,
+};
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3188/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk3188/Kconfig
new file mode 100644
index 000000000..e24e68ea5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3188/Kconfig
@@ -0,0 +1,38 @@
+if ROCKCHIP_RK3188
+
+config TARGET_ROCK
+	bool "Radxa Rock"
+	help
+	  Rock is a RK3188-based development board with 2 USB and 1 otg
+	  ports, HDMI, TV-out, micro-SD card, audio, WiFi  and 100MBit
+	  Ethernet, It also includes on-board nand and 1GB of SDRAM.
+	  Expansion connectors provide access to display pins, I2C, SPI,
+	  UART and GPIOs.
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0x20004040
+
+config SYS_SOC
+	default "rk3188"
+
+config SYS_MALLOC_F_LEN
+	default 0x0800
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config TPL_LIBCOMMON_SUPPORT
+	default y
+
+config TPL_LIBGENERIC_SUPPORT
+	default y
+
+source "board/radxa/rock/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3188/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk3188/Makefile
new file mode 100644
index 000000000..7dc123a3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3188/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright (c) 2015 Google, Inc
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+ifndef CONFIG_TPL_BUILD
+obj-y += clk_rk3188.o
+obj-y += rk3188.o
+obj-y += syscon_rk3188.o
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3188/clk_rk3188.c b/roms/u-boot/arch/arm/mach-rockchip/rk3188/clk_rk3188.c
new file mode 100644
index 000000000..94d1d23e1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3188/clk_rk3188.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rk3188.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk3188_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3188_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3188/rk3188.c b/roms/u-boot/arch/arm/mach-rockchip/rk3188/rk3188.c
new file mode 100644
index 000000000..ad8c6cd1d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3188/rk3188.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+#include <common.h>
+#include <dm.h>
+#include <hang.h>
+#include <init.h>
+#include <led.h>
+#include <log.h>
+#include <syscon.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/grf_rk3188.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <linux/err.h>
+
+#define GRF_BASE	0x20008000
+
+const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+	[BROM_BOOTSOURCE_EMMC] = "/dwmmc@1021c000",
+	[BROM_BOOTSOURCE_SD] = "/dwmmc@10214000",
+};
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+	/* Enable early UART on the RK3188 */
+	struct rk3188_grf * const grf = (void *)GRF_BASE;
+	enum {
+		GPIO1B1_SHIFT		= 2,
+		GPIO1B1_MASK		= 3,
+		GPIO1B1_GPIO		= 0,
+		GPIO1B1_UART2_SOUT,
+		GPIO1B1_JTAG_TDO,
+
+		GPIO1B0_SHIFT		= 0,
+		GPIO1B0_MASK		= 3,
+		GPIO1B0_GPIO		= 0,
+		GPIO1B0_UART2_SIN,
+		GPIO1B0_JTAG_TDI,
+	};
+
+	rk_clrsetreg(&grf->gpio1b_iomux,
+		     GPIO1B1_MASK << GPIO1B1_SHIFT |
+		     GPIO1B0_MASK << GPIO1B0_SHIFT,
+		     GPIO1B1_UART2_SOUT << GPIO1B1_SHIFT |
+		     GPIO1B0_UART2_SIN << GPIO1B0_SHIFT);
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+int arch_cpu_init(void)
+{
+	struct rk3188_grf *grf;
+
+	grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	if (IS_ERR(grf)) {
+		pr_err("grf syscon returned %ld\n", PTR_ERR(grf));
+		return 0;
+	}
+#ifdef CONFIG_ROCKCHIP_USB_UART
+	rk_clrsetreg(&grf->uoc0_con[0],
+		     SIDDQ_MASK | UOC_DISABLE_MASK | COMMON_ON_N_MASK,
+		     1 << SIDDQ_SHIFT | 1 << UOC_DISABLE_SHIFT |
+		     1 << COMMON_ON_N_SHIFT);
+	rk_clrsetreg(&grf->uoc0_con[2],
+		     SOFT_CON_SEL_MASK, 1 << SOFT_CON_SEL_SHIFT);
+	rk_clrsetreg(&grf->uoc0_con[3],
+		     OPMODE_MASK | XCVRSELECT_MASK |
+		     TERMSEL_FULLSPEED_MASK | SUSPENDN_MASK,
+		     OPMODE_NODRIVING << OPMODE_SHIFT |
+		     XCVRSELECT_FSTRANSC << XCVRSELECT_SHIFT |
+		     1 << TERMSEL_FULLSPEED_SHIFT |
+		     1 << SUSPENDN_SHIFT);
+	rk_clrsetreg(&grf->uoc0_con[0],
+		     BYPASSSEL_MASK | BYPASSDMEN_MASK,
+		     1 << BYPASSSEL_SHIFT | 1 << BYPASSDMEN_SHIFT);
+#endif
+	return 0;
+}
+#endif
+
+__weak int rk3188_board_late_init(void)
+{
+	return 0;
+}
+
+int rk_board_late_init(void)
+{
+	struct rk3188_grf *grf;
+
+	grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	if (IS_ERR(grf)) {
+		pr_err("grf syscon returned %ld\n", PTR_ERR(grf));
+		return 0;
+	}
+
+	/* enable noc remap to mimic legacy loaders */
+	rk_clrsetreg(&grf->soc_con0,
+		     NOC_REMAP_MASK << NOC_REMAP_SHIFT,
+		     NOC_REMAP_MASK << NOC_REMAP_SHIFT);
+
+	return rk3188_board_late_init();
+}
+
+#ifdef CONFIG_SPL_BUILD
+DECLARE_GLOBAL_DATA_PTR;
+static int setup_led(void)
+{
+#ifdef CONFIG_SPL_LED
+	struct udevice *dev;
+	char *led_name;
+	int ret;
+
+	led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led");
+	if (!led_name)
+		return 0;
+	ret = led_get_by_label(led_name, &dev);
+	if (ret) {
+		debug("%s: get=%d\n", __func__, ret);
+		return ret;
+	}
+	ret = led_set_state(dev, LEDST_ON);
+	if (ret)
+		return ret;
+#endif
+
+	return 0;
+}
+
+void spl_board_init(void)
+{
+	int ret;
+
+	ret = setup_led();
+	if (ret) {
+		debug("LED ret=%d\n", ret);
+		hang();
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3188/syscon_rk3188.c b/roms/u-boot/arch/arm/mach-rockchip/rk3188/syscon_rk3188.c
new file mode 100644
index 000000000..917ff37c0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3188/syscon_rk3188.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk3188_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3188-noc", .data = ROCKCHIP_SYSCON_NOC },
+	{ .compatible = "rockchip,rk3188-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ .compatible = "rockchip,rk3188-pmu", .data = ROCKCHIP_SYSCON_PMU },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3188) = {
+	.name = "rk3188_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3188_syscon_ids,
+};
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+static int rk3188_syscon_bind_of_plat(struct udevice *dev)
+{
+	dev->driver_data = dev->driver->of_match->data;
+	debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(rockchip_rk3188_noc) = {
+	.name = "rockchip_rk3188_noc",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3188_syscon_ids,
+	.bind = rk3188_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3188_grf) = {
+	.name = "rockchip_rk3188_grf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3188_syscon_ids + 1,
+	.bind = rk3188_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3188_pmu) = {
+	.name = "rockchip_rk3188_pmu",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3188_syscon_ids + 2,
+	.bind = rk3188_syscon_bind_of_plat,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk322x/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk322x/Kconfig
new file mode 100644
index 000000000..2fc6f6ea3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk322x/Kconfig
@@ -0,0 +1,37 @@
+if ROCKCHIP_RK322X
+
+
+config TARGET_EVB_RK3229
+	bool "EVB_RK3229"
+	select BOARD_LATE_INIT
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0x110005c8
+
+config SYS_SOC
+	default "rk322x"
+
+config SYS_MALLOC_F_LEN
+	default 0x800
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config TPL_MAX_SIZE
+        default 28672
+
+config TPL_STACK
+        default 0x10088000
+
+config TPL_TEXT_BASE
+        default 0x10081000
+
+source "board/rockchip/evb_rk3229/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk322x/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk322x/Makefile
new file mode 100644
index 000000000..89b0fed69
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk322x/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += clk_rk322x.o
+obj-y += rk322x.o
+obj-y += syscon_rk322x.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk322x/clk_rk322x.c b/roms/u-boot/arch/arm/mach-rockchip/rk322x/clk_rk322x.c
new file mode 100644
index 000000000..2e57672b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk322x/clk_rk322x.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rk322x.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk322x_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk322x_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk322x/rk322x.c b/roms/u-boot/arch/arm/mach-rockchip/rk322x/rk322x.c
new file mode 100644
index 000000000..ad4ac62e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk322x/rk322x.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/grf_rk322x.h>
+#include <asm/arch-rockchip/hardware.h>
+
+const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+	[BROM_BOOTSOURCE_EMMC] = "/dwmmc@30020000",
+	[BROM_BOOTSOURCE_SD] = "/dwmmc@30000000",
+};
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+#define GRF_BASE	0x11000000
+	static struct rk322x_grf * const grf = (void *)GRF_BASE;
+	enum {
+		GPIO1B2_SHIFT		= 4,
+		GPIO1B2_MASK		= 3 << GPIO1B2_SHIFT,
+		GPIO1B2_GPIO            = 0,
+		GPIO1B2_UART1_SIN,
+		GPIO1B2_UART21_SIN,
+
+		GPIO1B1_SHIFT		= 2,
+		GPIO1B1_MASK		= 3 << GPIO1B1_SHIFT,
+		GPIO1B1_GPIO            = 0,
+		GPIO1B1_UART1_SOUT,
+		GPIO1B1_UART21_SOUT,
+	};
+	enum {
+		CON_IOMUX_UART2SEL_SHIFT = 8,
+		CON_IOMUX_UART2SEL_MASK	= 1 << CON_IOMUX_UART2SEL_SHIFT,
+		CON_IOMUX_UART2SEL_2	= 0,
+		CON_IOMUX_UART2SEL_21,
+	};
+
+	/* Enable early UART2 channel 1 on the RK322x */
+	rk_clrsetreg(&grf->gpio1b_iomux,
+		     GPIO1B1_MASK | GPIO1B2_MASK,
+		     GPIO1B2_UART21_SIN << GPIO1B2_SHIFT |
+		     GPIO1B1_UART21_SOUT << GPIO1B1_SHIFT);
+	/* Set channel C as UART2 input */
+	rk_clrsetreg(&grf->con_iomux,
+		     CON_IOMUX_UART2SEL_MASK,
+		     CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT);
+}
+#endif
+
+int arch_cpu_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+#define SGRF_BASE	0x10150000
+	static struct rk322x_sgrf * const sgrf = (void *)SGRF_BASE;
+
+	/* Disable the ddr secure region setting to make it non-secure */
+	rk_clrreg(&sgrf->soc_con[0], 0x4000);
+#else
+#define GRF_BASE	0x11000000
+	static struct rk322x_grf * const grf = (void *)GRF_BASE;
+	/*
+	 * The integrated macphy is enabled by default, disable it
+	 * for saving power consuming.
+	 */
+	rk_clrsetreg(&grf->macphy_con[0],
+		     MACPHY_CFG_ENABLE_MASK,
+		     0 << MACPHY_CFG_ENABLE_SHIFT);
+
+#endif
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk322x/syscon_rk322x.c b/roms/u-boot/arch/arm/mach-rockchip/rk322x/syscon_rk322x.c
new file mode 100644
index 000000000..0d9dca817
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk322x/syscon_rk322x.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk322x_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3228-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ .compatible = "rockchip,rk3228-msch", .data = ROCKCHIP_SYSCON_MSCH },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk322x) = {
+	.name = "rk322x_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk322x_syscon_ids,
+};
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3288/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk3288/Kconfig
new file mode 100644
index 000000000..20a00c5be
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -0,0 +1,199 @@
+if ROCKCHIP_RK3288
+
+choice
+	prompt "RK3288 board select"
+
+config TARGET_CHROMEBOOK_JERRY
+	bool "Google/Rockchip Veyron-Jerry Chromebook"
+	select HAS_ROM
+	select BOARD_LATE_INIT
+	select ROCKCHIP_SPI_IMAGE
+	help
+	  Jerry is a RK3288-based clamshell device with 2 USB 3.0 ports,
+	  HDMI, an 11.9 inch EDP display, micro-SD card, touchpad and
+	  WiFi. It includes a Chrome OS EC (Cortex-M3) to provide access to
+	  the keyboard and battery functions.
+
+config TARGET_CHROMEBIT_MICKEY
+	bool "Google/Rockchip Veyron-Mickey Chromebit"
+	select BOARD_LATE_INIT
+	help
+	  Mickey is a small RK3288-based device with one USB 3.0 port, HDMI
+	  and WiFi. It has a separate power port and is designed to connect
+	  to the HDMI input of a monitor or TV. It has no internal battery.
+	  Typically a USB hub or wireless keyboard/touchpad is used to get
+	  keyboard and mouse access.
+
+config TARGET_CHROMEBOOK_MINNIE
+	bool "Google/Rockchip Veyron-Minnie Chromebook"
+	select BOARD_LATE_INIT
+	help
+	  Minnie is a RK3288-based convertible clamshell device with 2 USB 3.0
+	  ports, micro HDMI, a 10.1-inch 1280x800 EDP display, micro-SD card,
+	  HD camera, touchpad, WiFi and Bluetooth. It includes a Chrome OS
+	  EC (Cortex-M3) to provide access to the keyboard and battery
+	  functions. It includes 2 or 4GB of SDRAM and 16 or 32GB of
+	  internal MMC. The product name is ASUS Chromebook Flip.
+
+config TARGET_CHROMEBOOK_SPEEDY
+	bool "Google/Rockchip Veyron-Speedy Chromebook"
+	select BOARD_LATE_INIT
+	help
+	  Speedy is a RK3288-based clamshell device with 2 USB 2.0 ports,
+	  micro HDMI, an 11.6 inch display, micro-SD card,
+	  HD camera, touchpad, wifi and Bluetooth. It includes a Chrome OS
+	  EC (Cortex-M3) to provide access to the keyboard and battery
+	  functions. It includes 2 or 4GB of SDRAM and 16GB of internal MMC.
+	  The product name is Asus Chromebook C201PA.
+
+config TARGET_EVB_RK3288
+	bool "Evb-RK3288"
+	select HAS_ROM
+	select BOARD_LATE_INIT
+	select TPL
+	help
+	  EVB-RK3288 is a RK3288-based development board with 2 USB ports,
+	  HDMI, VGA, micro-SD card, audio, WiFi  and Gigabit Ethernet, It
+	  also includes on-board eMMC and 2GB of SDRAM. Expansion connectors
+	  provide access to display pins, I2C, SPI, UART and GPIOs.
+
+config TARGET_FENNEC_RK3288
+	bool "Fennec-RK3288"
+	select BOARD_LATE_INIT
+	help
+	  Fennec is a RK3288-based development board with 2 USB ports,
+	  HDMI, micro-SD card, audio, WiFi and Gigabit Ethernet. It also
+	  includes on-board eMMC and 2GB of SDRAM. Expansion connectors
+	  provide access to display pins, I2C, SPI, UART and GPIOs.
+
+config TARGET_FIREFLY_RK3288
+	bool "Firefly-RK3288"
+	select BOARD_LATE_INIT
+	select SPL_BOARD_INIT if SPL
+	select TPL
+	help
+	  Firefly is a RK3288-based development board with 2 USB ports,
+	  HDMI, VGA, micro-SD card, audio, WiFi  and Gigabit Ethernet, It
+	  also includes on-board eMMC and 1GB of SDRAM. Expansion connectors
+	  provide access to display pins, I2C, SPI, UART and GPIOs.
+
+config TARGET_MIQI_RK3288
+	bool "MiQi-RK3288"
+	select BOARD_LATE_INIT
+	help
+	  MiQi-RK3288 is a RK3288-based development board with 4 USB 2.0
+	  ports, HDMI, micro-SD card, 16 GB eMMC and Gigabit Ethernet. It
+	  has 1 or 2 GiB SDRAM. Expansion connectors provide access to
+	  I2C, SPI, UART, GPIOs and fan control.
+
+config TARGET_PHYCORE_RK3288
+	bool "phyCORE-RK3288"
+        select BOARD_LATE_INIT
+	select SPL_BOARD_INIT if SPL
+	help
+	  Add basic support for the PCM-947 carrier board, a RK3288 based
+	  development board made by PHYTEC. This board works in a combination
+	  with the phyCORE-RK3288 System on Module.
+
+config TARGET_POPMETAL_RK3288
+	bool "PopMetal-RK3288"
+	select BOARD_LATE_INIT
+	help
+	  PopMetal is a RK3288-based development board with 3 USB host ports,
+	  1 micro USB OTG port, HDMI, VGA, micro-SD card, audio, WiFi, Gigabit
+	  Ethernet and lots of sensors. It also includes on-board 8 GeMMC and
+	  2GB DDR3. Expansion connectors provide access to I2C, SPI, UART,
+	  GPIOs and display interface.
+
+config TARGET_VYASA_RK3288
+	bool "Vyasa-RK3288"
+	select BOARD_LATE_INIT
+	select TPL
+	help
+	  Vyasa is a RK3288-based development board with 2 USB ports,
+	  HDMI, VGA, micro-SD card, audio, WiFi  and Gigabit Ethernet, It
+	  also includes on-board eMMC and 2GB of SDRAM. Expansion connectors
+	  provide access to display pins, I2C, SPI, UART and GPIOs.
+
+config TARGET_ROCK2
+	bool "Radxa Rock 2"
+	select BOARD_LATE_INIT
+	help
+	  Rock 2 is a SOM and base-board combination based on RK3288. It
+	  includes Ethernet, HDMI, 3 USB, micro-SD, audio, SATA, WiFi and
+	  space for a real-time-clock battery. There is also an expansion
+	  interface which provides access to many pins.
+
+config TARGET_TINKER_RK3288
+	bool "Tinker-RK3288"
+        select BOARD_LATE_INIT
+	select TPL
+	help
+	  Tinker is a RK3288-based development board with 2 USB ports, HDMI,
+	  micro-SD card, audio, Gigabit Ethernet. It also includes on-board
+	  8GB eMMC and 2GB of SDRAM. Expansion connectors provide access to
+	  I2C, SPI, UART, GPIOs.
+
+endchoice
+
+config ROCKCHIP_FAST_SPL
+	bool "Change the CPU to full speed in SPL"
+	depends on TARGET_CHROMEBOOK_JERRY
+	help
+	  Some boards want to boot as fast as possible. We can increase the
+	  CPU frequency in SPL if the power supply is configured to the correct
+	  voltage. This option is only available on boards which support it
+	  and have the required PMIC code.
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff730094
+
+config SYS_SOC
+	default "rk3288"
+
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
+config SPL_DRIVERS_MISC_SUPPORT
+	default y
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config TPL_LDSCRIPT
+	default "arch/arm/mach-rockchip/u-boot-tpl.lds"
+
+config TPL_MAX_SIZE
+	default 32768
+
+config TPL_STACK
+        default 0xff718000
+
+config TPL_TEXT_BASE
+	default 0xff704000
+
+source "board/amarula/vyasa-rk3288/Kconfig"
+
+source "board/chipspark/popmetal_rk3288/Kconfig"
+
+source "board/firefly/firefly-rk3288/Kconfig"
+
+source "board/google/veyron/Kconfig"
+
+source "board/mqmaker/miqi_rk3288/Kconfig"
+
+source "board/phytec/phycore_rk3288/Kconfig"
+
+source "board/radxa/rock2/Kconfig"
+
+source "board/rockchip/evb_rk3288/Kconfig"
+
+source "board/rockchip/tinker_rk3288/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3288/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk3288/Makefile
new file mode 100644
index 000000000..a0033a0d8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3288/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2015 Google, Inc
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += clk_rk3288.o
+obj-y += rk3288.o
+obj-y += syscon_rk3288.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3288/clk_rk3288.c b/roms/u-boot/arch/arm/mach-rockchip/rk3288/clk_rk3288.c
new file mode 100644
index 000000000..fb4c0891d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3288/clk_rk3288.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk3288_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3288_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3288/rk3288.c b/roms/u-boot/arch/arm/mach-rockchip/rk3288/rk3288.c
new file mode 100644
index 000000000..bc20bc5ab
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3288/rk3288.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co., Ltd
+ */
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <env.h>
+#include <clk.h>
+#include <init.h>
+#include <malloc.h>
+#include <asm/armv7.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cpu_rk3288.h>
+#include <asm/arch-rockchip/cru.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/grf_rk3288.h>
+#include <asm/arch-rockchip/pmu_rk3288.h>
+#include <asm/arch-rockchip/qos_rk3288.h>
+#include <asm/arch-rockchip/sdram.h>
+#include <linux/err.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GRF_BASE	0xff770000
+
+const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+	[BROM_BOOTSOURCE_EMMC] = "/dwmmc@ff0f0000",
+	[BROM_BOOTSOURCE_SD] = "/dwmmc@ff0c0000",
+};
+
+#ifdef CONFIG_SPL_BUILD
+static void configure_l2ctlr(void)
+{
+	u32 l2ctlr;
+
+	l2ctlr = read_l2ctlr();
+	l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */
+
+	/*
+	 * Data RAM write latency: 2 cycles
+	 * Data RAM read latency: 2 cycles
+	 * Data RAM setup latency: 1 cycle
+	 * Tag RAM write latency: 1 cycle
+	 * Tag RAM read latency: 1 cycle
+	 * Tag RAM setup latency: 1 cycle
+	 */
+	l2ctlr |= (1 << 3 | 1 << 0);
+	write_l2ctlr(l2ctlr);
+}
+#endif
+
+int rk3288_qos_init(void)
+{
+	int val = 2 << PRIORITY_HIGH_SHIFT | 2 << PRIORITY_LOW_SHIFT;
+	/* set vop qos to higher priority */
+	writel(val, CPU_AXI_QOS_PRIORITY + VIO0_VOP_QOS);
+	writel(val, CPU_AXI_QOS_PRIORITY + VIO1_VOP_QOS);
+
+	if (!fdt_node_check_compatible(gd->fdt_blob, 0,
+				       "rockchip,rk3288-tinker")) {
+		/* set isp qos to higher priority */
+		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_R_QOS);
+		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W0_QOS);
+		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W1_QOS);
+	}
+
+	return 0;
+}
+
+int arch_cpu_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	configure_l2ctlr();
+#else
+	/* We do some SoC one time setting here. */
+	struct rk3288_grf * const grf = (void *)GRF_BASE;
+
+	/* Use rkpwm by default */
+	rk_setreg(&grf->soc_con2, 1 << 0);
+
+	/*
+	 * Disable JTAG on sdmmc0 IO. The SDMMC won't work until this bit is
+	 * cleared
+	 */
+	rk_clrreg(&grf->soc_con0, 1 << 12);
+
+	rk3288_qos_init();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+	/* Enable early UART on the RK3288 */
+	struct rk3288_grf * const grf = (void *)GRF_BASE;
+
+	rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT |
+		     GPIO7C6_MASK << GPIO7C6_SHIFT,
+		     GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT |
+		     GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT);
+}
+#endif
+
+__weak int rk3288_board_late_init(void)
+{
+	return 0;
+}
+
+int rk_board_late_init(void)
+{
+	return rk3288_board_late_init();
+}
+
+static int ft_rk3288w_setup(void *blob)
+{
+	const char *path;
+	int offs, ret;
+
+	path = "/clock-controller@ff760000";
+	offs = fdt_path_offset(blob, path);
+	if (offs < 0) {
+		debug("failed to found fdt path %s\n", path);
+		return offs;
+	}
+
+	ret = fdt_setprop_string(blob, offs, "compatible", "rockchip,rk3288w-cru");
+	if (ret) {
+		printf("failed to set rk3288w-cru compatible (ret=%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	if (soc_is_rk3288w())
+		return ft_rk3288w_setup(blob);
+
+	return 0;
+}
+
+static int do_clock(struct cmd_tbl *cmdtp, int flag, int argc,
+		    char *const argv[])
+{
+	static const struct {
+		char *name;
+		int id;
+	} clks[] = {
+		{ "osc", CLK_OSC },
+		{ "apll", CLK_ARM },
+		{ "dpll", CLK_DDR },
+		{ "cpll", CLK_CODEC },
+		{ "gpll", CLK_GENERAL },
+#ifdef CONFIG_ROCKCHIP_RK3036
+		{ "mpll", CLK_NEW },
+#else
+		{ "npll", CLK_NEW },
+#endif
+	};
+	int ret, i;
+	struct udevice *dev;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret) {
+		printf("clk-uclass not found\n");
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++) {
+		struct clk clk;
+		ulong rate;
+
+		clk.id = clks[i].id;
+		ret = clk_request(dev, &clk);
+		if (ret < 0)
+			continue;
+
+		rate = clk_get_rate(&clk);
+		printf("%s: %lu\n", clks[i].name, rate);
+
+		clk_free(&clk);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	clock, 2, 1, do_clock,
+	"display information about clocks",
+	""
+);
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3288/syscon_rk3288.c b/roms/u-boot/arch/arm/mach-rockchip/rk3288/syscon_rk3288.c
new file mode 100644
index 000000000..9c1ae880c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3288/syscon_rk3288.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk3288_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3288-noc", .data = ROCKCHIP_SYSCON_NOC },
+	{ .compatible = "rockchip,rk3288-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ .compatible = "rockchip,rk3288-sgrf", .data = ROCKCHIP_SYSCON_SGRF },
+	{ .compatible = "rockchip,rk3288-pmu", .data = ROCKCHIP_SYSCON_PMU },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3288) = {
+	.name = "rk3288_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids,
+};
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+static int rk3288_syscon_bind_of_plat(struct udevice *dev)
+{
+	dev->driver_data = dev->driver->of_match->data;
+	debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(rockchip_rk3288_noc) = {
+	.name = "rockchip_rk3288_noc",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids,
+	.bind = rk3288_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3288_grf) = {
+	.name = "rockchip_rk3288_grf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids + 1,
+	.bind = rk3288_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3288_sgrf) = {
+	.name = "rockchip_rk3288_sgrf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids + 2,
+	.bind = rk3288_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3288_pmu) = {
+	.name = "rockchip_rk3288_pmu",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids + 3,
+	.bind = rk3288_syscon_bind_of_plat,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3308/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk3308/Kconfig
new file mode 100644
index 000000000..b9fdfe2e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3308/Kconfig
@@ -0,0 +1,27 @@
+if ROCKCHIP_RK3308
+
+config TARGET_EVB_RK3308
+	bool "EVB_RK3308"
+	select BOARD_LATE_INIT
+
+config TARGET_ROC_RK3308_CC
+       bool "Firefly roc-rk3308-cc"
+	select BOARD_LATE_INIT
+
+config SYS_SOC
+	default "rk3308"
+
+config SYS_MALLOC_F_LEN
+	default 0x400
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff000500
+
+
+source "board/rockchip/evb_rk3308/Kconfig"
+source "board/firefly/firefly-rk3308/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3308/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk3308/Makefile
new file mode 100644
index 000000000..ce4d44bb3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3308/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2018 Rockchip Electronics Co., Ltd.
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += syscon_rk3308.o
+obj-y += rk3308.o
+obj-y += clk_rk3308.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3308/clk_rk3308.c b/roms/u-boot/arch/arm/mach-rockchip/rk3308/clk_rk3308.c
new file mode 100644
index 000000000..ccda53380
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3308/clk_rk3308.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch/cru_rk3308.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk3308_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3308_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3308/rk3308.c b/roms/u-boot/arch/arm/mach-rockchip/rk3308/rk3308.c
new file mode 100644
index 000000000..70fe0d0ac
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3308/rk3308.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *Copyright (c) 2018 Rockchip Electronics Co., Ltd
+ */
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/grf_rk3308.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/gpio.h>
+#include <debug_uart.h>
+#include <linux/bitops.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#include <asm/armv8/mmu.h>
+static struct mm_region rk3308_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0xff000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xff000000UL,
+		.phys = 0xff000000UL,
+		.size = 0x01000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = rk3308_mem_map;
+
+#define GRF_BASE	0xff000000
+#define SGRF_BASE	0xff2b0000
+
+enum {
+	GPIO1C7_SHIFT		= 8,
+	GPIO1C7_MASK		= GENMASK(11, 8),
+	GPIO1C7_GPIO		= 0,
+	GPIO1C7_UART1_RTSN,
+	GPIO1C7_UART2_TX_M0,
+	GPIO1C7_SPI2_MOSI,
+	GPIO1C7_JTAG_TMS,
+
+	GPIO1C6_SHIFT		= 4,
+	GPIO1C6_MASK		= GENMASK(7, 4),
+	GPIO1C6_GPIO		= 0,
+	GPIO1C6_UART1_CTSN,
+	GPIO1C6_UART2_RX_M0,
+	GPIO1C6_SPI2_MISO,
+	GPIO1C6_JTAG_TCLK,
+
+	GPIO4D3_SHIFT           = 6,
+	GPIO4D3_MASK            = GENMASK(7, 6),
+	GPIO4D3_GPIO            = 0,
+	GPIO4D3_SDMMC_D3,
+	GPIO4D3_UART2_TX_M1,
+
+	GPIO4D2_SHIFT           = 4,
+	GPIO4D2_MASK            = GENMASK(5, 4),
+	GPIO4D2_GPIO            = 0,
+	GPIO4D2_SDMMC_D2,
+	GPIO4D2_UART2_RX_M1,
+
+	UART2_IO_SEL_SHIFT	= 2,
+	UART2_IO_SEL_MASK	= GENMASK(3, 2),
+	UART2_IO_SEL_M0		= 0,
+	UART2_IO_SEL_M1,
+	UART2_IO_SEL_USB,
+
+	GPIO2C0_SEL_SRC_CTRL_SHIFT	= 11,
+	GPIO2C0_SEL_SRC_CTRL_MASK	= BIT(11),
+	GPIO2C0_SEL_SRC_CTRL_IOMUX	= 0,
+	GPIO2C0_SEL_SRC_CTRL_SEL_PLUS,
+
+	GPIO3B3_SEL_SRC_CTRL_SHIFT	= 7,
+	GPIO3B3_SEL_SRC_CTRL_MASK	= BIT(7),
+	GPIO3B3_SEL_SRC_CTRL_IOMUX	= 0,
+	GPIO3B3_SEL_SRC_CTRL_SEL_PLUS,
+
+	GPIO3B3_SEL_PLUS_SHIFT		= 4,
+	GPIO3B3_SEL_PLUS_MASK		= GENMASK(6, 4),
+	GPIO3B3_SEL_PLUS_GPIO3_B3	= 0,
+	GPIO3B3_SEL_PLUS_FLASH_ALE,
+	GPIO3B3_SEL_PLUS_EMMC_PWREN,
+	GPIO3B3_SEL_PLUS_SPI1_CLK,
+	GPIO3B3_SEL_PLUS_LCDC_D23_M1,
+
+	GPIO3B2_SEL_SRC_CTRL_SHIFT	= 3,
+	GPIO3B2_SEL_SRC_CTRL_MASK	= BIT(3),
+	GPIO3B2_SEL_SRC_CTRL_IOMUX	= 0,
+	GPIO3B2_SEL_SRC_CTRL_SEL_PLUS,
+
+	GPIO3B2_SEL_PLUS_SHIFT		= 0,
+	GPIO3B2_SEL_PLUS_MASK		= GENMASK(2, 0),
+	GPIO3B2_SEL_PLUS_GPIO3_B2	= 0,
+	GPIO3B2_SEL_PLUS_FLASH_RDN,
+	GPIO3B2_SEL_PLUS_EMMC_RSTN,
+	GPIO3B2_SEL_PLUS_SPI1_MISO,
+	GPIO3B2_SEL_PLUS_LCDC_D22_M1,
+
+	I2C3_IOFUNC_SRC_CTRL_SHIFT	= 10,
+	I2C3_IOFUNC_SRC_CTRL_MASK	= BIT(10),
+	I2C3_IOFUNC_SRC_CTRL_SEL_PLUS	= 1,
+
+	GPIO2A3_SEL_SRC_CTRL_SHIFT	= 7,
+	GPIO2A3_SEL_SRC_CTRL_MASK	= BIT(7),
+	GPIO2A3_SEL_SRC_CTRL_SEL_PLUS	= 1,
+
+	GPIO2A2_SEL_SRC_CTRL_SHIFT	= 3,
+	GPIO2A2_SEL_SRC_CTRL_MASK	= BIT(3),
+	GPIO2A2_SEL_SRC_CTRL_SEL_PLUS	= 1,
+};
+
+enum {
+	IOVSEL3_CTRL_SHIFT	= 8,
+	IOVSEL3_CTRL_MASK	= BIT(8),
+	VCCIO3_SEL_BY_GPIO	= 0,
+	VCCIO3_SEL_BY_IOVSEL3,
+
+	IOVSEL3_SHIFT		= 3,
+	IOVSEL3_MASK		= BIT(3),
+	VCCIO3_3V3		= 0,
+	VCCIO3_1V8,
+};
+
+/*
+ * The voltage of VCCIO3(which is the voltage domain of emmc/flash/sfc
+ * interface) can indicated by GPIO0_A4 or io_vsel3. The SOC defaults
+ * use GPIO0_A4 to indicate power supply voltage for VCCIO3 by hardware,
+ * then we can switch to io_vsel3 after system power on, and release GPIO0_A4
+ * for other usage.
+ */
+
+#define GPIO0_A4	4
+
+int rk_board_init(void)
+{
+	static struct rk3308_grf * const grf = (void *)GRF_BASE;
+	u32 val;
+	int ret;
+
+	ret = gpio_request(GPIO0_A4, "gpio0_a4");
+	if (ret < 0) {
+		printf("request for gpio0_a4 failed:%d\n", ret);
+		return 0;
+	}
+
+	gpio_direction_input(GPIO0_A4);
+
+	if (gpio_get_value(GPIO0_A4))
+		val = VCCIO3_SEL_BY_IOVSEL3 << IOVSEL3_CTRL_SHIFT |
+		      VCCIO3_1V8 << IOVSEL3_SHIFT;
+	else
+		val = VCCIO3_SEL_BY_IOVSEL3 << IOVSEL3_CTRL_SHIFT |
+		      VCCIO3_3V3 << IOVSEL3_SHIFT;
+	rk_clrsetreg(&grf->soc_con0, IOVSEL3_CTRL_MASK | IOVSEL3_MASK, val);
+
+	gpio_free(GPIO0_A4);
+	return 0;
+}
+
+#if defined(CONFIG_DEBUG_UART)
+__weak void board_debug_uart_init(void)
+{
+	static struct rk3308_grf * const grf = (void *)GRF_BASE;
+
+	/* Enable early UART2 channel m1 on the rk3308 */
+	rk_clrsetreg(&grf->soc_con5, UART2_IO_SEL_MASK,
+		     UART2_IO_SEL_M1 << UART2_IO_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio4d_iomux,
+		     GPIO4D3_MASK | GPIO4D2_MASK,
+		     GPIO4D2_UART2_RX_M1 << GPIO4D2_SHIFT |
+		     GPIO4D3_UART2_TX_M1 << GPIO4D3_SHIFT);
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD)
+int arch_cpu_init(void)
+{
+	static struct rk3308_sgrf * const sgrf = (void *)SGRF_BASE;
+	static struct rk3308_grf * const grf = (void *)GRF_BASE;
+
+	/* Set CRYPTO SDMMC EMMC NAND SFC USB master bus to be secure access */
+	rk_clrreg(&sgrf->con_secure0, 0x2b83);
+
+	/*
+	 * Enable plus options to use more pinctrl functions, including
+	 * GPIO2A2_PLUS, GPIO2A3_PLUS and I2C3_MULTI_SRC_PLUS.
+	 */
+	rk_clrsetreg(&grf->soc_con13,
+		     I2C3_IOFUNC_SRC_CTRL_MASK | GPIO2A3_SEL_SRC_CTRL_MASK |
+		     GPIO2A2_SEL_SRC_CTRL_MASK,
+		     I2C3_IOFUNC_SRC_CTRL_SEL_PLUS << I2C3_IOFUNC_SRC_CTRL_SHIFT |
+		     GPIO2A3_SEL_SRC_CTRL_SEL_PLUS << GPIO2A3_SEL_SRC_CTRL_SHIFT |
+		     GPIO2A2_SEL_SRC_CTRL_SEL_PLUS << GPIO2A2_SEL_SRC_CTRL_SHIFT);
+
+	/* Plus options about GPIO3B2_PLUS, GPIO3B3_PLUS and GPIO2C0_PLUS. */
+	rk_clrsetreg(&grf->soc_con15,
+		     GPIO2C0_SEL_SRC_CTRL_MASK | GPIO3B3_SEL_SRC_CTRL_MASK |
+		     GPIO3B2_SEL_SRC_CTRL_MASK,
+		     GPIO2C0_SEL_SRC_CTRL_SEL_PLUS << GPIO2C0_SEL_SRC_CTRL_SHIFT |
+		     GPIO3B3_SEL_SRC_CTRL_SEL_PLUS << GPIO3B3_SEL_SRC_CTRL_SHIFT |
+		     GPIO3B2_SEL_SRC_CTRL_SEL_PLUS << GPIO3B2_SEL_SRC_CTRL_SHIFT);
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3308/syscon_rk3308.c b/roms/u-boot/arch/arm/mach-rockchip/rk3308/syscon_rk3308.c
new file mode 100644
index 000000000..b380ff572
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3308/syscon_rk3308.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier:     GPL-2.0+
+/*
+ * (C) Copyright 2018 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk3308_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3308-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3308) = {
+	.name = "rk3308_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3308_syscon_ids,
+};
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3328/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk3328/Kconfig
new file mode 100644
index 000000000..d13a16902
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3328/Kconfig
@@ -0,0 +1,44 @@
+if ROCKCHIP_RK3328
+
+choice
+	prompt "RK3328 board select"
+
+config TARGET_EVB_RK3328
+	bool "RK3328 evaluation board"
+	help
+	  RK3328evb is a evaluation board for Rockchip rk3328,
+	  with full function and phisical connectors support like
+	  usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
+
+endchoice
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff1005c8
+
+config SYS_SOC
+	default "rk3328"
+
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config TPL_LDSCRIPT
+	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
+
+config TPL_TEXT_BASE
+	default 0xff091000
+
+config TPL_MAX_SIZE
+	default 28672
+
+config TPL_STACK
+	default 0xff098000
+
+source "board/rockchip/evb_rk3328/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3328/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk3328/Makefile
new file mode 100644
index 000000000..bbab036a1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3328/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += clk_rk3328.o
+obj-y += rk3328.o
+obj-y += syscon_rk3328.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3328/clk_rk3328.c b/roms/u-boot/arch/arm/mach-rockchip/rk3328/clk_rk3328.c
new file mode 100644
index 000000000..70c0eb6f9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3328/clk_rk3328.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rk3328.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk3328_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3328_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3328/rk3328.c b/roms/u-boot/arch/arm/mach-rockchip/rk3328/rk3328.c
new file mode 100644
index 000000000..ec3336cb4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3328/rk3328.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/grf_rk3328.h>
+#include <asm/arch-rockchip/uart.h>
+#include <asm/armv8/mmu.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CRU_BASE		0xFF440000
+#define GRF_BASE		0xFF100000
+#define UART2_BASE		0xFF130000
+#define FW_DDR_CON_REG		0xFF7C0040
+
+const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+	[BROM_BOOTSOURCE_EMMC] = "/rksdmmc@ff520000",
+	[BROM_BOOTSOURCE_SD] = "/rksdmmc@ff500000",
+};
+
+static struct mm_region rk3328_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0xff000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xff000000UL,
+		.phys = 0xff000000UL,
+		.size = 0x1000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = rk3328_mem_map;
+
+int arch_cpu_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	/* We do some SoC one time setting here. */
+
+	/* Disable the ddr secure region setting to make it non-secure */
+	rk_setreg(FW_DDR_CON_REG, 0x200);
+#endif
+	return 0;
+}
+
+void board_debug_uart_init(void)
+{
+	struct rk3328_grf_regs * const grf = (void *)GRF_BASE;
+	struct rk_uart * const uart = (void *)UART2_BASE;
+	enum{
+		GPIO2A0_SEL_SHIFT       = 0,
+		GPIO2A0_SEL_MASK        = 3 << GPIO2A0_SEL_SHIFT,
+		GPIO2A0_UART2_TX_M1     = 1,
+
+		GPIO2A1_SEL_SHIFT       = 2,
+		GPIO2A1_SEL_MASK        = 3 << GPIO2A1_SEL_SHIFT,
+		GPIO2A1_UART2_RX_M1     = 1,
+	};
+	enum {
+		IOMUX_SEL_UART2_SHIFT   = 0,
+		IOMUX_SEL_UART2_MASK    = 3 << IOMUX_SEL_UART2_SHIFT,
+		IOMUX_SEL_UART2_M0      = 0,
+		IOMUX_SEL_UART2_M1,
+	};
+
+	/* uart_sel_clk default select 24MHz */
+	writel((3 << (8 + 16)) | (2 << 8), CRU_BASE + 0x148);
+
+	/* init uart baud rate 1500000 */
+	writel(0x83, &uart->lcr);
+	writel(0x1, &uart->rbr);
+	writel(0x3, &uart->lcr);
+
+	/* Enable early UART2 */
+	rk_clrsetreg(&grf->com_iomux,
+		     IOMUX_SEL_UART2_MASK,
+		     IOMUX_SEL_UART2_M1 << IOMUX_SEL_UART2_SHIFT);
+	rk_clrsetreg(&grf->gpio2a_iomux,
+		     GPIO2A0_SEL_MASK,
+		     GPIO2A0_UART2_TX_M1 << GPIO2A0_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio2a_iomux,
+		     GPIO2A1_SEL_MASK,
+		     GPIO2A1_UART2_RX_M1 << GPIO2A1_SEL_SHIFT);
+
+	/* enable FIFO */
+	writel(0x1, &uart->sfe);
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3328/syscon_rk3328.c b/roms/u-boot/arch/arm/mach-rockchip/rk3328/syscon_rk3328.c
new file mode 100644
index 000000000..daf74a0e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3328/syscon_rk3328.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <asm/arch-rockchip/clock.h>
+#include <dm.h>
+#include <syscon.h>
+
+static const struct udevice_id rk3328_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3328-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ }
+};
+
+U_BOOT_DRIVER(rockchip_rk3328_grf) = {
+	.name = "rockchip_rk3328_grf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3328_syscon_ids,
+};
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3368/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk3368/Kconfig
new file mode 100644
index 000000000..78eb96df3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3368/Kconfig
@@ -0,0 +1,80 @@
+if ROCKCHIP_RK3368
+
+choice
+	prompt "RK3368 board"
+
+config TARGET_LION_RK3368
+        bool "Theobroma Systems RK3368-uQ7 (Lion) module"
+	help
+	  The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm,
+	  MXM-230 connector) system-on-module designed by Theobroma
+	  Systems for industrial applications.
+
+	  It provides the following features:
+	   - 8x Cortex-A53 (in 2 clusters of 4 cores each)
+	   - (on-module) up to 4GB of DDR3 memory
+	   - (on-module) SPI-NOR flash
+	   - (on-module) eMMC
+	   - Gigabit Ethernet (with an on-module KSZ9031 PHY)
+	   - USB
+	   - HDMI
+	   - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group)
+	   - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...)
+	   - on-module STM32 providing CAN, RTC and fan-control
+	   - (optional on-module) EAL4+-certified security module
+
+config TARGET_SHEEP
+	bool "Sheep board"
+	help
+	  Sheep board is designed by Rockchip as a EVB board
+	  for rk3368.
+
+config TARGET_GEEKBOX
+	bool "GeekBox"
+
+config TARGET_EVB_PX5
+        bool "Evb-PX5"
+        help
+	 PX5 EVB is designed by Rockchip for automotive field
+         with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS
+         HDMI video input/output interface, audio codec ES8396,
+         WIFI/BT (on RTL8723BS), Gsensor BMA250E and light&proximity
+         sensor STK3410.
+endchoice
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff738200
+
+config SYS_SOC
+	default "rk3368"
+
+config SYS_MALLOC_F_LEN
+	default 0x4000
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+source "board/theobroma-systems/lion_rk3368/Kconfig"
+source "board/rockchip/sheep_rk3368/Kconfig"
+source "board/geekbuying/geekbox/Kconfig"
+source "board/rockchip/evb_px5/Kconfig"
+
+config SPL_LDSCRIPT
+	default "arch/arm/cpu/armv8/u-boot-spl.lds"
+
+config SPL_STACK_R_ADDR
+	default 0x04000000
+
+config TPL_MAX_SIZE
+        default 28672
+
+config TPL_STACK
+        default 0xff8cffff
+
+config TPL_TEXT_BASE
+        default 0xff8c1000
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3368/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk3368/Makefile
new file mode 100644
index 000000000..3bddc104a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3368/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2016 Andreas Färber
+obj-y		+= clk_rk3368.o
+obj-y		+= rk3368.o
+obj-y 		+= syscon_rk3368.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3368/clk_rk3368.c b/roms/u-boot/arch/arm/mach-rockchip/rk3368/clk_rk3368.c
new file mode 100644
index 000000000..b07531972
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3368/clk_rk3368.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Rockchip Electronics Co., Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rk3368.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk3368_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3368_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3368/rk3368.c b/roms/u-boot/arch/arm/mach-rockchip/rk3368/rk3368.c
new file mode 100644
index 000000000..9b7132d47
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3368/rk3368.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co., Ltd
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include <common.h>
+#include <init.h>
+#include <syscon.h>
+#include <asm/armv8/mmu.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rk3368.h>
+#include <asm/arch-rockchip/grf_rk3368.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define IMEM_BASE                  0xFF8C0000
+
+/* Max MCU's SRAM value is 8K, begin at (IMEM_BASE + 4K) */
+#define MCU_SRAM_BASE			(IMEM_BASE + 1024 * 4)
+#define MCU_SRAM_BASE_BIT31_BIT28	((MCU_SRAM_BASE & GENMASK(31, 28)) >> 28)
+#define MCU_SRAM_BASE_BIT27_BIT12	((MCU_SRAM_BASE & GENMASK(27, 12)) >> 12)
+/* exsram may using by mcu to accessing dram(0x0-0x20000000) */
+#define MCU_EXSRAM_BASE    (0)
+#define MCU_EXSRAM_BASE_BIT31_BIT28       ((MCU_EXSRAM_BASE & GENMASK(31, 28)) >> 28)
+#define MCU_EXSRAM_BASE_BIT27_BIT12       ((MCU_EXSRAM_BASE & GENMASK(27, 12)) >> 12)
+/* experi no used, reserved value = 0 */
+#define MCU_EXPERI_BASE    (0)
+#define MCU_EXPERI_BASE_BIT31_BIT28       ((MCU_EXPERI_BASE & GENMASK(31, 28)) >> 28)
+#define MCU_EXPERI_BASE_BIT27_BIT12       ((MCU_EXPERI_BASE & GENMASK(27, 12)) >> 12)
+
+static struct mm_region rk3368_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xf0000000UL,
+		.phys = 0xf0000000UL,
+		.size = 0x10000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = rk3368_mem_map;
+
+const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+	[BROM_BOOTSOURCE_EMMC] = "/dwmmc@ff0f0000",
+	[BROM_BOOTSOURCE_SD] = "/dwmmc@ff0c0000",
+};
+
+#ifdef CONFIG_ARCH_EARLY_INIT_R
+static int mcu_init(void)
+{
+	struct rk3368_grf *grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	struct rk3368_cru *cru = rockchip_get_cru();
+
+	rk_clrsetreg(&grf->soc_con14, MCU_SRAM_BASE_BIT31_BIT28_MASK,
+		     MCU_SRAM_BASE_BIT31_BIT28 << MCU_SRAM_BASE_BIT31_BIT28_SHIFT);
+	rk_clrsetreg(&grf->soc_con11, MCU_SRAM_BASE_BIT27_BIT12_MASK,
+		     MCU_SRAM_BASE_BIT27_BIT12 << MCU_SRAM_BASE_BIT27_BIT12_SHIFT);
+	rk_clrsetreg(&grf->soc_con14, MCU_EXSRAM_BASE_BIT31_BIT28_MASK,
+		     MCU_EXSRAM_BASE_BIT31_BIT28 << MCU_EXSRAM_BASE_BIT31_BIT28_SHIFT);
+	rk_clrsetreg(&grf->soc_con12, MCU_EXSRAM_BASE_BIT27_BIT12_MASK,
+		     MCU_EXSRAM_BASE_BIT27_BIT12 << MCU_EXSRAM_BASE_BIT27_BIT12_SHIFT);
+	rk_clrsetreg(&grf->soc_con14, MCU_EXPERI_BASE_BIT31_BIT28_MASK,
+		     MCU_EXPERI_BASE_BIT31_BIT28 << MCU_EXPERI_BASE_BIT31_BIT28_SHIFT);
+	rk_clrsetreg(&grf->soc_con13, MCU_EXPERI_BASE_BIT27_BIT12_MASK,
+		     MCU_EXPERI_BASE_BIT27_BIT12 << MCU_EXPERI_BASE_BIT27_BIT12_SHIFT);
+
+	rk_clrsetreg(&cru->clksel_con[12], MCU_PLL_SEL_MASK | MCU_CLK_DIV_MASK,
+		     (MCU_PLL_SEL_GPLL << MCU_PLL_SEL_SHIFT) |
+		     (5 << MCU_CLK_DIV_SHIFT));
+
+	 /* mcu dereset, for start running */
+	rk_clrreg(&cru->softrst_con[1], MCU_PO_SRST_MASK | MCU_SYS_SRST_MASK);
+
+	return 0;
+}
+
+int arch_early_init_r(void)
+{
+	return mcu_init();
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * The SPL (and also the full U-Boot stage on the RK3368) will run in
+ * secure mode (i.e. EL3) and an ATF will eventually be booted before
+ * starting up the operating system... so we can initialize the SGRF
+ * here and rely on the ATF installing the final (secure) policy
+ * later.
+ */
+static inline uintptr_t sgrf_soc_con_addr(unsigned int no)
+{
+	const uintptr_t SGRF_BASE =
+		(uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
+
+	return SGRF_BASE + sizeof(u32) * no;
+}
+
+static inline uintptr_t sgrf_busdmac_addr(unsigned int no)
+{
+	const uintptr_t SGRF_BASE =
+		(uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
+	const uintptr_t SGRF_BUSDMAC_OFFSET = 0x100;
+	const uintptr_t SGRF_BUSDMAC_BASE = SGRF_BASE + SGRF_BUSDMAC_OFFSET;
+
+	return SGRF_BUSDMAC_BASE + sizeof(u32) * no;
+}
+
+static void sgrf_init(void)
+{
+	struct rk3368_cru * const cru =
+		(struct rk3368_cru * const)rockchip_get_cru();
+	const u16 SGRF_SOC_CON_SEC = GENMASK(15, 0);
+	const u16 SGRF_BUSDMAC_CON0_SEC = BIT(2);
+	const u16 SGRF_BUSDMAC_CON1_SEC = GENMASK(15, 12);
+
+	/* Set all configurable IP to 'non secure'-mode */
+	rk_setreg(sgrf_soc_con_addr(5), SGRF_SOC_CON_SEC);
+	rk_setreg(sgrf_soc_con_addr(6), SGRF_SOC_CON_SEC);
+	rk_setreg(sgrf_soc_con_addr(7), SGRF_SOC_CON_SEC);
+
+	/*
+	 * From rockchip-uboot/arch/arm/cpu/armv8/rk33xx/cpu.c
+	 * Original comment: "ddr space set no secure mode"
+	 */
+	rk_clrreg(sgrf_soc_con_addr(8), SGRF_SOC_CON_SEC);
+	rk_clrreg(sgrf_soc_con_addr(9), SGRF_SOC_CON_SEC);
+	rk_clrreg(sgrf_soc_con_addr(10), SGRF_SOC_CON_SEC);
+
+	/* Set 'secure dma' to 'non secure'-mode */
+	rk_setreg(sgrf_busdmac_addr(0), SGRF_BUSDMAC_CON0_SEC);
+	rk_setreg(sgrf_busdmac_addr(1), SGRF_BUSDMAC_CON1_SEC);
+
+	dsb();  /* barrier */
+
+	rk_setreg(&cru->softrst_con[1], DMA1_SRST_REQ);
+	rk_setreg(&cru->softrst_con[4], DMA2_SRST_REQ);
+
+	dsb();  /* barrier */
+	udelay(10);
+
+	rk_clrreg(&cru->softrst_con[1], DMA1_SRST_REQ);
+	rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ);
+}
+
+int arch_cpu_init(void)
+{
+	/* Reset security, so we can use DMA in the MMC drivers */
+	sgrf_init();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+	/*
+	 * N.B.: This is called before the device-model has been
+	 *       initialised. For this reason, we can not access
+	 *       the GRF address range using the syscon API.
+	 */
+#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
+	struct rk3368_grf * const grf =
+		(struct rk3368_grf * const)0xff770000;
+
+	enum {
+		GPIO2D1_MASK            = GENMASK(3, 2),
+		GPIO2D1_GPIO            = 0,
+		GPIO2D1_UART0_SOUT      = (1 << 2),
+
+		GPIO2D0_MASK            = GENMASK(1, 0),
+		GPIO2D0_GPIO            = 0,
+		GPIO2D0_UART0_SIN       = (1 << 0),
+	};
+
+	/* Enable early UART0 on the RK3368 */
+	rk_clrsetreg(&grf->gpio2d_iomux,
+		     GPIO2D0_MASK, GPIO2D0_UART0_SIN);
+	rk_clrsetreg(&grf->gpio2d_iomux,
+		     GPIO2D1_MASK, GPIO2D1_UART0_SOUT);
+#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff1c0000)
+	struct rk3368_pmu_grf * const pmugrf __maybe_unused =
+		(struct rk3368_pmu_grf * const)0xff738000;
+
+	enum {
+		/* UART4 */
+		GPIO0D2_MASK		= GENMASK(5, 4),
+		GPIO0D2_GPIO		= 0,
+		GPIO0D2_UART4_SOUT	= (3 << 4),
+
+		GPIO0D3_MASK		= GENMASK(7, 6),
+		GPIO0D3_GPIO		= 0,
+		GPIO0D3_UART4_SIN	= (3 << 6),
+	};
+
+	/* Enable early UART4 on the PX5 */
+	rk_clrsetreg(&pmugrf->gpio0d_iomux,
+		     GPIO0D2_MASK | GPIO0D3_MASK,
+		     GPIO0D2_UART4_SOUT | GPIO0D3_UART4_SIN);
+#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff690000)
+	struct rk3368_grf * const grf =
+		(struct rk3368_grf * const)0xff770000;
+
+	enum {
+		GPIO2A6_SHIFT           = 12,
+		GPIO2A6_MASK            = GENMASK(13, 12),
+		GPIO2A6_GPIO            = 0,
+		GPIO2A6_UART2_SIN       = (2 << GPIO2A6_SHIFT),
+
+		GPIO2A5_SHIFT           = 10,
+		GPIO2A5_MASK            = GENMASK(11, 10),
+		GPIO2A5_GPIO            = 0,
+		GPIO2A5_UART2_SOUT      = (2 << GPIO2A5_SHIFT),
+	};
+
+	/* Enable early UART2 on the RK3368 */
+	rk_clrsetreg(&grf->gpio2a_iomux,
+		     GPIO2A6_MASK, GPIO2A6_UART2_SIN);
+	rk_clrsetreg(&grf->gpio2a_iomux,
+		     GPIO2A5_MASK, GPIO2A5_UART2_SOUT);
+#endif
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c b/roms/u-boot/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c
new file mode 100644
index 000000000..dc2d831dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk3368_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3368-grf",
+	  .data = ROCKCHIP_SYSCON_GRF },
+	{ .compatible = "rockchip,rk3368-pmugrf",
+	  .data = ROCKCHIP_SYSCON_PMUGRF },
+	{ .compatible = "rockchip,rk3368-msch",
+	  .data = ROCKCHIP_SYSCON_MSCH },
+	{ .compatible = "rockchip,rk3368-sgrf",
+	  .data = ROCKCHIP_SYSCON_SGRF },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3368) = {
+	.name = "rk3368_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3368_syscon_ids,
+};
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+static int rk3368_syscon_bind_of_plat(struct udevice *dev)
+{
+	dev->driver_data = dev->driver->of_match->data;
+	debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(rockchip_rk3368_grf) = {
+	.name = "rockchip_rk3368_grf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3368_syscon_ids,
+	.bind = rk3368_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3368_pmugrf) = {
+	.name = "rockchip_rk3368_pmugrf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3368_syscon_ids + 1,
+	.bind = rk3368_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3368_msch) = {
+	.name = "rockchip_rk3368_msch",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3368_syscon_ids + 2,
+	.bind = rk3368_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3368_sgrf) = {
+	.name = "rockchip_rk3368_sgrf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3368_syscon_ids + 3,
+	.bind = rk3368_syscon_bind_of_plat,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3399/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rk3399/Kconfig
new file mode 100644
index 000000000..17628f917
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -0,0 +1,162 @@
+if ROCKCHIP_RK3399
+
+choice
+	prompt "RK3399 board select"
+
+config TARGET_CHROMEBOOK_BOB
+	bool "Asus Flip C101PA Chromebook (RK3399)"
+	select HAS_ROM
+	select ROCKCHIP_SPI_IMAGE
+	help
+	  Bob is a small RK3299-based device similar in apperance to Minnie.
+	  It has two USB 3.0 type-C ports, 4GB of SDRAM, WiFi and a 10.1",
+	  1280x800 display. It uses its USB ports for both power and external
+	  display. It includes a Chrome OS EC (Cortex-M3) to provide access to
+	  the keyboard and battery functions.
+
+config TARGET_EVB_RK3399
+	bool "RK3399 evaluation board"
+	help
+	  RK3399evb is a evaluation board for Rockchip RK3399,
+	  with full function and physical connectors support like Type-C ports,
+	  USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial...
+
+config TARGET_PINEBOOK_PRO_RK3399
+	bool "Pinebook Pro"
+	help
+	  Pinebook Pro is a laptop based on the Rockchip rk3399 SoC
+	  with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
+	  1920*1080 screen and all the usual laptop features.
+
+config TARGET_PUMA_RK3399
+	bool "Theobroma Systems RK3399-Q7 (Puma)"
+	help
+	  The RK3399-Q7 (Puma) is a system-on-module (designed and
+	  marketed by Theobroma Systems) featuring the Rockchip RK3399
+	  in a Qseven-compatible form-factor (running of a single 5V
+	  supply and exposing its external interfaces on a MXM-230
+	  connector).
+
+	  Key features of the RK3399-Q7 include:
+	   * on-module USB 3.0 hub (2x USB 3.0 host + 1x USB 2.0 host)
+	   * USB 3.0 dual-role
+	   * on-module Micrel KSZ9031 GbE PHY
+	   * on-module eMMC (up to 256GB configurations available)
+	   * on-module DDR3 (1GB, 2GB and 4GB configurations available)
+	   * HDMI, eDP, MIPI-DSI, MIPI-DSI/CSI and MIPI-CSI
+	   * SPI, I2C, I2S, UART, GPIO, ...
+
+config TARGET_ROCK960_RK3399
+	bool "Vamrs Limited Rock960 board family"
+	help
+	  Support for Rock960 board family by Vamrs Limited. This board
+	  family consists of Rock960 (Consumer Edition) and Ficus
+	  (Enterprise Edition) 96Boards.
+
+	  Common features implemented on both boards:
+	   * Rockchip RK3399 SoC (2xCortex A72, 4xCortex A53, ARM Mali T860MP4)
+	   * 16/32GB eMMC, uSD slot
+	   * HDMI/DP/MIPI
+	   * 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons
+
+	  Additional features of Rock960:
+	   * 2GiB/4GiB LPDDR3 RAM
+	   * 1x USB 3.0 type A, 1x USB 2.0 type A (host mode only),
+	     1x USB 3.0 type C OTG
+
+	  Additional features of Ficus:
+	   * 2GiB/4GiB DDR3 RAM
+	   * Ethernet
+	   * Dual SATA
+	   * 2x USB 3.0 type A, 2x USB 2.0 type A (host mode only),
+	     1x USB 3.0 type C OTG
+
+config TARGET_ROCKPRO64_RK3399
+	bool "Pine64 Rockpro64 board"
+	help
+	  Rockro64 is SBC produced by Pine64. Key features:
+
+	   * Rockchip RK3399
+	   * 2/4GB Dual-Channel LPDDR3
+	   * SD card slot
+	   * eMMC socket
+	   * 128Mb SPI Flash
+	   * Gigabit ethernet
+	   * PCIe 4X slot
+	   * WiFI/BT module socket
+	   * HDMI In/Out, DP, MIPI DSI/CSI, eDP
+	   * USB 3.0, 2.0
+	   * USB Type C power and data
+	   * GPIO expansion ports
+	   * DC 12V/2A
+
+config TARGET_ROC_PC_RK3399
+	bool "Firefly ROC-RK3399-PC board"
+	help
+	  ROC-RK3399-PC is SBC produced by Firefly. Key features:
+
+	   * Rockchip RK3399
+	   * 4GB Dual-Channel LPDDR4 64-bit
+	   * SD card slot
+	   * eMMC socket
+	   * 16MB SPI Flash
+	   * Gigabit ethernet
+	   * PCIe
+	   * HDMI In/Out, DP, MIPI DSI/CSI, eDP
+	   * USB 3.0, 2.0
+	   * USB Type C power and data
+	   * GPIO expansion ports
+	   * wide voltage input(5V-15V), dual cell battery
+	   * Wifi/BT accessible via expansion board M.2
+
+endchoice
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff320300
+
+config SYS_SOC
+	default "rk3399"
+
+config SYS_MALLOC_F_LEN
+	default 0x4000
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config TPL_LDSCRIPT
+	default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
+
+config TPL_MAX_SIZE
+        default 188416
+
+config TPL_STACK
+        default 0xff8effff
+
+config TPL_TEXT_BASE
+        default 0xff8c2000
+
+config SPL_STACK_R_ADDR
+	default 0x04000000
+
+if BOOTCOUNT_LIMIT
+
+config BOOTCOUNT_BOOTLIMIT
+	default 3
+
+config SYS_BOOTCOUNT_ADDR
+	default 0xff3100f0	# PMU_SYS_REG0
+
+endif # BOOTCOUNT_LIMIT
+
+source "board/firefly/roc-pc-rk3399/Kconfig"
+source "board/google/gru/Kconfig"
+source "board/pine64/pinebook-pro-rk3399/Kconfig"
+source "board/pine64/rockpro64_rk3399/Kconfig"
+source "board/rockchip/evb_rk3399/Kconfig"
+source "board/theobroma-systems/puma_rk3399/Kconfig"
+source "board/vamrs/rock960_rk3399/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3399/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rk3399/Makefile
new file mode 100644
index 000000000..98ebeac34
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3399/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += clk_rk3399.o
+obj-y += rk3399.o
+obj-y += syscon_rk3399.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3399/clk_rk3399.c b/roms/u-boot/arch/arm/mach-rockchip/rk3399/clk_rk3399.c
new file mode 100644
index 000000000..9d9a837fc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3399/clk_rk3399.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru.h>
+#include <linux/err.h>
+
+static int rockchip_get_cruclk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(clk_rk3399), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3399_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_cruclk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
+
+static int rockchip_get_pmucruclk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(rockchip_rk3399_pmuclk), devp);
+}
+
+void *rockchip_get_pmucru(void)
+{
+	struct rk3399_pmuclk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_pmucruclk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->pmucru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3399/rk3399.c b/roms/u-boot/arch/arm/mach-rockchip/rk3399/rk3399.c
new file mode 100644
index 000000000..869d2159b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <spl_gpio.h>
+#include <syscon.h>
+#include <asm/armv8/mmu.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/gpio.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <linux/bitops.h>
+#include <power/regulator.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GRF_EMMCCORE_CON11 0xff77f02c
+#define GRF_BASE	0xff770000
+
+const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+	[BROM_BOOTSOURCE_EMMC] = "/sdhci@fe330000",
+	[BROM_BOOTSOURCE_SPINOR] = "/spi@ff1d0000",
+	[BROM_BOOTSOURCE_SD] = "/mmc@fe320000",
+};
+
+static struct mm_region rk3399_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0xf8000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xf8000000UL,
+		.phys = 0xf8000000UL,
+		.size = 0x08000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = rk3399_mem_map;
+
+#ifdef CONFIG_SPL_BUILD
+
+#define TIMER_END_COUNT_L	0x00
+#define TIMER_END_COUNT_H	0x04
+#define TIMER_INIT_COUNT_L	0x10
+#define TIMER_INIT_COUNT_H	0x14
+#define TIMER_CONTROL_REG	0x1c
+
+#define TIMER_EN	0x1
+#define TIMER_FMODE	BIT(0)
+#define TIMER_RMODE	BIT(1)
+
+void rockchip_stimer_init(void)
+{
+	/* If Timer already enabled, don't re-init it */
+	u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+
+	if (reg & TIMER_EN)
+		return;
+
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_END_COUNT_L);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_END_COUNT_H);
+	writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_INIT_COUNT_L);
+	writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_INIT_COUNT_H);
+	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE + \
+	       TIMER_CONTROL_REG);
+}
+#endif
+
+int arch_cpu_init(void)
+{
+
+#ifdef CONFIG_SPL_BUILD
+	struct rk3399_pmusgrf_regs *sgrf;
+	struct rk3399_grf_regs *grf;
+
+	/*
+	 * Disable DDR and SRAM security regions.
+	 *
+	 * As we are entered from the BootROM, the region from
+	 * 0x0 through 0xfffff (i.e. the first MB of memory) will
+	 * be protected. This will cause issues with the DW_MMC
+	 * driver, which tries to DMA from/to the stack (likely)
+	 * located in this range.
+	 */
+	sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
+	rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0);
+	rk_clrreg(&sgrf->slv_secure_con4, 0x2000);
+
+	/*  eMMC clock generator: disable the clock multipilier */
+	grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	rk_clrreg(&grf->emmccore_con[11], 0x0ff);
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+#define GRF_BASE	0xff770000
+#define GPIO0_BASE	0xff720000
+#define PMUGRF_BASE	0xff320000
+	struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
+#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
+	struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
+	struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
+#endif
+
+#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
+	/* Enable early UART0 on the RK3399 */
+	rk_clrsetreg(&grf->gpio2c_iomux,
+		     GRF_GPIO2C0_SEL_MASK,
+		     GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio2c_iomux,
+		     GRF_GPIO2C1_SEL_MASK,
+		     GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
+#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff1B0000)
+	/* Enable early UART3 on the RK3399 */
+	rk_clrsetreg(&grf->gpio3b_iomux,
+		     GRF_GPIO3B6_SEL_MASK,
+		     GRF_UART3_SIN << GRF_GPIO3B6_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio3b_iomux,
+		     GRF_GPIO3B7_SEL_MASK,
+		     GRF_UART3_SOUT << GRF_GPIO3B7_SEL_SHIFT);
+#else
+# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
+	rk_setreg(&grf->io_vsel, 1 << 0);
+
+	/*
+	 * Let's enable these power rails here, we are already running the SPI
+	 * Flash based code.
+	 */
+	spl_gpio_output(gpio, GPIO(BANK_B, 2), 1);  /* PP1500_EN */
+	spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
+
+	spl_gpio_output(gpio, GPIO(BANK_B, 4), 1);  /* PP3000_EN */
+	spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
+#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
+
+	/* Enable early UART2 channel C on the RK3399 */
+	rk_clrsetreg(&grf->gpio4c_iomux,
+		     GRF_GPIO4C3_SEL_MASK,
+		     GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio4c_iomux,
+		     GRF_GPIO4C4_SEL_MASK,
+		     GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
+	/* Set channel C as UART2 input */
+	rk_clrsetreg(&grf->soc_con7,
+		     GRF_UART_DBG_SEL_MASK,
+		     GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
+#endif
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
+const char *spl_decode_boot_device(u32 boot_device)
+{
+	int i;
+	static const struct {
+		u32 boot_device;
+		const char *ofpath;
+	} spl_boot_devices_tbl[] = {
+		{ BOOT_DEVICE_MMC1, "/mmc@fe320000" },
+		{ BOOT_DEVICE_MMC2, "/sdhci@fe330000" },
+		{ BOOT_DEVICE_SPI, "/spi@ff1d0000" },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(spl_boot_devices_tbl); ++i)
+		if (spl_boot_devices_tbl[i].boot_device == boot_device)
+			return spl_boot_devices_tbl[i].ofpath;
+
+	return NULL;
+}
+
+void spl_perform_fixups(struct spl_image_info *spl_image)
+{
+	void *blob = spl_image->fdt_addr;
+	const char *boot_ofpath;
+	int chosen;
+
+	/*
+	 * Inject the ofpath of the device the full U-Boot (or Linux in
+	 * Falcon-mode) was booted from into the FDT, if a FDT has been
+	 * loaded at the same time.
+	 */
+	if (!blob)
+		return;
+
+	boot_ofpath = spl_decode_boot_device(spl_image->boot_device);
+	if (!boot_ofpath) {
+		pr_err("%s: could not map boot_device to ofpath\n", __func__);
+		return;
+	}
+
+	chosen = fdt_find_or_add_subnode(blob, 0, "chosen");
+	if (chosen < 0) {
+		pr_err("%s: could not find/create '/chosen'\n", __func__);
+		return;
+	}
+	fdt_setprop_string(blob, chosen,
+			   "u-boot,spl-boot-device", boot_ofpath);
+}
+
+#if defined(SPL_GPIO_SUPPORT)
+static void rk3399_force_power_on_reset(void)
+{
+	ofnode node;
+	struct gpio_desc sysreset_gpio;
+
+	debug("%s: trying to force a power-on reset\n", __func__);
+
+	node = ofnode_path("/config");
+	if (!ofnode_valid(node)) {
+		debug("%s: no /config node?\n", __func__);
+		return;
+	}
+
+	if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0,
+				       &sysreset_gpio, GPIOD_IS_OUT)) {
+		debug("%s: could not find a /config/sysreset-gpio\n", __func__);
+		return;
+	}
+
+	dm_gpio_set_value(&sysreset_gpio, 1);
+}
+#endif
+
+void __weak led_setup(void)
+{
+}
+
+void spl_board_init(void)
+{
+	led_setup();
+
+#if defined(SPL_GPIO_SUPPORT)
+	struct rockchip_cru *cru = rockchip_get_cru();
+
+	/*
+	 * The RK3399 resets only 'almost all logic' (see also in the TRM
+	 * "3.9.4 Global software reset"), when issuing a software reset.
+	 * This may cause issues during boot-up for some configurations of
+	 * the application software stack.
+	 *
+	 * To work around this, we test whether the last reset reason was
+	 * a power-on reset and (if not) issue an overtemp-reset to reset
+	 * the entire module.
+	 *
+	 * While this was previously fixed by modifying the various places
+	 * that could generate a software reset (e.g. U-Boot's sysreset
+	 * driver, the ATF or Linux), we now have it here to ensure that
+	 * we no longer have to track this through the various components.
+	 */
+	if (cru->glb_rst_st != 0)
+		rk3399_force_power_on_reset();
+#endif
+
+#if defined(SPL_DM_REGULATOR)
+	/*
+	 * Turning the eMMC and SPI back on (if disabled via the Qseven
+	 * BIOS_ENABLE) signal is done through a always-on regulator).
+	 */
+	if (regulators_enable_boot_on(false))
+		debug("%s: Cannot enable boot on regulator\n", __func__);
+#endif
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c b/roms/u-boot/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c
new file mode 100644
index 000000000..b360ca7dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk3399_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3399-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ .compatible = "rockchip,rk3399-pmugrf", .data = ROCKCHIP_SYSCON_PMUGRF },
+	{ .compatible = "rockchip,rk3399-pmusgrf", .data = ROCKCHIP_SYSCON_PMUSGRF },
+	{ .compatible = "rockchip,rk3399-cic", .data = ROCKCHIP_SYSCON_CIC },
+	{ .compatible = "rockchip,rk3399-pmu", .data = ROCKCHIP_SYSCON_PMU },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3399) = {
+	.name = "rk3399_syscon",
+	.id = UCLASS_SYSCON,
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	.bind = dm_scan_fdt_dev,
+#endif
+	.of_match = rk3399_syscon_ids,
+};
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+static int rk3399_syscon_bind_of_plat(struct udevice *dev)
+{
+	dev->driver_data = dev->driver->of_match->data;
+	debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(rockchip_rk3399_grf) = {
+	.name = "rockchip_rk3399_grf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3399_syscon_ids,
+	.bind = rk3399_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3399_pmugrf) = {
+	.name = "rockchip_rk3399_pmugrf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3399_syscon_ids + 1,
+	.bind = rk3399_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3399_pmusgrf) = {
+	.name = "rockchip_rk3399_pmusgrf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3399_syscon_ids + 2,
+	.bind = rk3399_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3399_cic) = {
+	.name = "rockchip_rk3399_cic",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3399_syscon_ids + 3,
+	.bind = rk3399_syscon_bind_of_plat,
+};
+
+U_BOOT_DRIVER(rockchip_rk3399_pmu) = {
+	.name = "rockchip_rk3399_pmu",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3399_syscon_ids + 4,
+	.bind = rk3399_syscon_bind_of_plat,
+};
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rv1108/Kconfig b/roms/u-boot/arch/arm/mach-rockchip/rv1108/Kconfig
new file mode 100644
index 000000000..a12216dcc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rv1108/Kconfig
@@ -0,0 +1,42 @@
+if ROCKCHIP_RV1108
+
+choice
+	prompt "RV1108 board select"
+
+config TARGET_EVB_RV1108
+	bool "EVB_RV1108"
+	help
+	  RV1108 EVB is a evaluation board for Rockchp RV1108.
+
+	  Key features of the board include:
+	   * one macro USB OTG port
+	   * one USB HOST port
+	   * one RS232 to USB port route to UART2 as debug port
+	   * MIPI screen with resolution 720 x 1280
+	   * 128M DDR3
+	   * 64M SPI Nor Flash
+	   * macro SD card interface
+	   * HDMI output
+	   * 10/100 Mbps Ethernet
+	   * camera interface compatible with imx323 / ov2710 / ov4689
+
+config TARGET_ELGIN_RV1108
+	bool "ELGIN_RV1108"
+	help
+	  RV1108 ELGIN is a board based on the Rockchip RV1108.
+
+endchoice
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0x10300580
+
+config SYS_SOC
+	default "rv1108"
+
+config SYS_MALLOC_F_LEN
+	default 0x400
+
+source board/rockchip/evb_rv1108/Kconfig
+source board/elgin/elgin_rv1108/Kconfig
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rv1108/Makefile b/roms/u-boot/arch/arm/mach-rockchip/rv1108/Makefile
new file mode 100644
index 000000000..9035a1a89
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rv1108/Makefile
@@ -0,0 +1,11 @@
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+ifndef CONFIG_SPL_BUILD
+obj-y += syscon_rv1108.o
+endif
+obj-y += rv1108.o
+obj-y += clk_rv1108.o
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rv1108/clk_rv1108.c b/roms/u-boot/arch/arm/mach-rockchip/rv1108/clk_rv1108.c
new file mode 100644
index 000000000..44b53c407
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rv1108/clk_rv1108.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rv1108.h>
+#include <linux/err.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_DRIVER_GET(clk_rv1108), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rv1108_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rv1108/rv1108.c b/roms/u-boot/arch/arm/mach-rockchip/rv1108/rv1108.c
new file mode 100644
index 000000000..6362af995
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rv1108/rv1108.c
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
diff --git a/roms/u-boot/arch/arm/mach-rockchip/rv1108/syscon_rv1108.c b/roms/u-boot/arch/arm/mach-rockchip/rv1108/syscon_rv1108.c
new file mode 100644
index 000000000..babdf5720
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/rv1108/syscon_rv1108.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rv1108_syscon_ids[] = {
+	{ .compatible = "rockchip,rv1108-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rv1108) = {
+	.name = "rv1108_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rv1108_syscon_ids,
+};
diff --git a/roms/u-boot/arch/arm/mach-rockchip/sdram.c b/roms/u-boot/arch/arm/mach-rockchip/sdram.c
new file mode 100644
index 000000000..28c379ef0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/sdram.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Rockchip Electronics Co., Ltd.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <init.h>
+#include <log.h>
+#include <ram.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/sdram.h>
+#include <dm/uclass-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TRUST_PARAMETER_OFFSET    (34 * 1024 * 1024)
+
+struct tos_parameter_t {
+	u32 version;
+	u32 checksum;
+	struct {
+		char name[8];
+		s64 phy_addr;
+		u32 size;
+		u32 flags;
+	} tee_mem;
+	struct {
+		char name[8];
+		s64 phy_addr;
+		u32 size;
+		u32 flags;
+	} drm_mem;
+	s64 reserve[8];
+};
+
+int dram_init_banksize(void)
+{
+	size_t top = min((unsigned long)(gd->ram_size + CONFIG_SYS_SDRAM_BASE),
+			 (unsigned long)(gd->ram_top));
+
+#ifdef CONFIG_ARM64
+	/* Reserve 0x200000 for ATF bl31 */
+	gd->bd->bi_dram[0].start = 0x200000;
+	gd->bd->bi_dram[0].size = top - gd->bd->bi_dram[0].start;
+#else
+#ifdef CONFIG_SPL_OPTEE
+	struct tos_parameter_t *tos_parameter;
+
+	tos_parameter = (struct tos_parameter_t *)(CONFIG_SYS_SDRAM_BASE +
+			TRUST_PARAMETER_OFFSET);
+
+	if (tos_parameter->tee_mem.flags == 1) {
+		gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+		gd->bd->bi_dram[0].size = tos_parameter->tee_mem.phy_addr
+					- CONFIG_SYS_SDRAM_BASE;
+		gd->bd->bi_dram[1].start = tos_parameter->tee_mem.phy_addr +
+					tos_parameter->tee_mem.size;
+		gd->bd->bi_dram[1].size = top - gd->bd->bi_dram[1].start;
+	} else {
+		gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+		gd->bd->bi_dram[0].size = 0x8400000;
+		/* Reserve 32M for OPTEE with TA */
+		gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE
+					+ gd->bd->bi_dram[0].size + 0x2000000;
+		gd->bd->bi_dram[1].size = top - gd->bd->bi_dram[1].start;
+	}
+#else
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = top - gd->bd->bi_dram[0].start;
+#endif
+#endif
+
+	return 0;
+}
+
+size_t rockchip_sdram_size(phys_addr_t reg)
+{
+	u32 rank, cs0_col, bk, cs0_row, cs1_row, bw, row_3_4;
+	size_t chipsize_mb = 0;
+	size_t size_mb = 0;
+	u32 ch;
+	u32 cs1_col = 0;
+	u32 bg = 0;
+	u32 dbw, dram_type;
+	u32 sys_reg2 = readl(reg);
+	u32 sys_reg3 = readl(reg + 4);
+	u32 ch_num = 1 + ((sys_reg2 >> SYS_REG_NUM_CH_SHIFT)
+		       & SYS_REG_NUM_CH_MASK);
+
+	dram_type = (sys_reg2 >> SYS_REG_DDRTYPE_SHIFT) & SYS_REG_DDRTYPE_MASK;
+	debug("%s %x %x\n", __func__, (u32)reg, sys_reg2);
+	for (ch = 0; ch < ch_num; ch++) {
+		rank = 1 + (sys_reg2 >> SYS_REG_RANK_SHIFT(ch) &
+			SYS_REG_RANK_MASK);
+		cs0_col = 9 + (sys_reg2 >> SYS_REG_COL_SHIFT(ch) &
+			  SYS_REG_COL_MASK);
+		cs1_col = cs0_col;
+		bk = 3 - ((sys_reg2 >> SYS_REG_BK_SHIFT(ch)) & SYS_REG_BK_MASK);
+		if ((sys_reg3 >> SYS_REG_VERSION_SHIFT &
+		     SYS_REG_VERSION_MASK) == 0x2) {
+			cs1_col = 9 + (sys_reg3 >> SYS_REG_CS1_COL_SHIFT(ch) &
+				  SYS_REG_CS1_COL_MASK);
+			if (((sys_reg3 >> SYS_REG_EXTEND_CS0_ROW_SHIFT(ch) &
+			    SYS_REG_EXTEND_CS0_ROW_MASK) << 2) + (sys_reg2 >>
+			    SYS_REG_CS0_ROW_SHIFT(ch) &
+			    SYS_REG_CS0_ROW_MASK) == 7)
+				cs0_row = 12;
+			else
+				cs0_row = 13 + (sys_reg2 >>
+					  SYS_REG_CS0_ROW_SHIFT(ch) &
+					  SYS_REG_CS0_ROW_MASK) +
+					  ((sys_reg3 >>
+					  SYS_REG_EXTEND_CS0_ROW_SHIFT(ch) &
+					  SYS_REG_EXTEND_CS0_ROW_MASK) << 2);
+			if (((sys_reg3 >> SYS_REG_EXTEND_CS1_ROW_SHIFT(ch) &
+			    SYS_REG_EXTEND_CS1_ROW_MASK) << 2) + (sys_reg2 >>
+			    SYS_REG_CS1_ROW_SHIFT(ch) &
+			    SYS_REG_CS1_ROW_MASK) == 7)
+				cs1_row = 12;
+			else
+				cs1_row = 13 + (sys_reg2 >>
+					  SYS_REG_CS1_ROW_SHIFT(ch) &
+					  SYS_REG_CS1_ROW_MASK) +
+					  ((sys_reg3 >>
+					  SYS_REG_EXTEND_CS1_ROW_SHIFT(ch) &
+					  SYS_REG_EXTEND_CS1_ROW_MASK) << 2);
+		} else {
+			cs0_row = 13 + (sys_reg2 >> SYS_REG_CS0_ROW_SHIFT(ch) &
+				SYS_REG_CS0_ROW_MASK);
+			cs1_row = 13 + (sys_reg2 >> SYS_REG_CS1_ROW_SHIFT(ch) &
+				SYS_REG_CS1_ROW_MASK);
+		}
+		bw = (2 >> ((sys_reg2 >> SYS_REG_BW_SHIFT(ch)) &
+			SYS_REG_BW_MASK));
+		row_3_4 = sys_reg2 >> SYS_REG_ROW_3_4_SHIFT(ch) &
+			SYS_REG_ROW_3_4_MASK;
+		if (dram_type == DDR4) {
+			dbw = (sys_reg2 >> SYS_REG_DBW_SHIFT(ch)) &
+				SYS_REG_DBW_MASK;
+			bg = (dbw == 2) ? 2 : 1;
+		}
+		chipsize_mb = (1 << (cs0_row + cs0_col + bk + bg + bw - 20));
+
+		if (rank > 1)
+			chipsize_mb += chipsize_mb >> ((cs0_row - cs1_row) +
+				       (cs0_col - cs1_col));
+		if (row_3_4)
+			chipsize_mb = chipsize_mb * 3 / 4;
+		size_mb += chipsize_mb;
+		if (rank > 1)
+			debug("rank %d cs0_col %d cs1_col %d bk %d cs0_row %d\
+			       cs1_row %d bw %d row_3_4 %d\n",
+			       rank, cs0_col, cs1_col, bk, cs0_row,
+			       cs1_row, bw, row_3_4);
+		else
+			debug("rank %d cs0_col %d bk %d cs0_row %d\
+			       bw %d row_3_4 %d\n",
+			       rank, cs0_col, bk, cs0_row,
+			       bw, row_3_4);
+	}
+
+	/*
+	 * This is workaround for issue we can't get correct size for 4GB ram
+	 * in 32bit system and available before we really need ram space
+	 * out of 4GB, eg.enable ARM LAPE(rk3288 supports 8GB ram).
+	 * The size of 4GB is '0x1 00000000', and this value will be truncated
+	 * to 0 in 32bit system, and system can not get correct ram size.
+	 * Rockchip SoCs reserve a blob of space for peripheral near 4GB,
+	 * and we are now setting SDRAM_MAX_SIZE as max available space for
+	 * ram in 4GB, so we can use this directly to workaround the issue.
+	 * TODO:
+	 *   1. update correct value for SDRAM_MAX_SIZE as what dram
+	 *   controller sees.
+	 *   2. update board_get_usable_ram_top() and dram_init_banksize()
+	 *   to reserve memory for peripheral space after previous update.
+	 */
+	if (size_mb > (SDRAM_MAX_SIZE >> 20))
+		size_mb = (SDRAM_MAX_SIZE >> 20);
+
+	return (size_t)size_mb << 20;
+}
+
+int dram_init(void)
+{
+	struct ram_info ram;
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM init failed: %d\n", ret);
+		return ret;
+	}
+	ret = ram_get_info(dev, &ram);
+	if (ret) {
+		debug("Cannot get DRAM size: %d\n", ret);
+		return ret;
+	}
+	gd->ram_size = ram.size;
+	debug("SDRAM base=%lx, size=%lx\n",
+	      (unsigned long)ram.base, (unsigned long)ram.size);
+
+	return 0;
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	unsigned long top = CONFIG_SYS_SDRAM_BASE + SDRAM_MAX_SIZE;
+
+	return (gd->ram_top > top) ? top : gd->ram_top;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/spl-boot-order.c b/roms/u-boot/arch/arm/mach-rockchip/spl-boot-order.c
new file mode 100644
index 000000000..93b8e7de4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/spl-boot-order.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <mmc.h>
+#include <spl.h>
+#include <asm/global_data.h>
+
+#if CONFIG_IS_ENABLED(OF_LIBFDT)
+/**
+ * spl_node_to_boot_device() - maps from a DT-node to a SPL boot device
+ * @node:	of_offset of the node
+ *
+ * The SPL framework uses BOOT_DEVICE_... constants to identify its boot
+ * sources.  These may take on a device-specific meaning, depending on
+ * what nodes are enabled in a DTS (e.g. BOOT_DEVICE_MMC1 may refer to
+ * different controllers/block-devices, depending on which SD/MMC controllers
+ * are enabled in any given DTS).  This function maps from a DT-node back
+ * onto a BOOT_DEVICE_... constant, considering the currently active devices.
+ *
+ * Returns
+ *   -ENOENT, if no device matching the node could be found
+ *   -ENOSYS, if the device matching the node can not be mapped onto a
+ *            SPL boot device (e.g. the third MMC device)
+ *   -1, for unspecified failures
+ *   a positive integer (from the BOOT_DEVICE_... family) on succes.
+ */
+
+static int spl_node_to_boot_device(int node)
+{
+	struct udevice *parent;
+
+	/*
+	 * This should eventually move into the SPL code, once SPL becomes
+	 * aware of the block-device layer.  Until then (and to avoid unneeded
+	 * delays in getting this feature out), it lives at the board-level.
+	 */
+	if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
+		struct udevice *dev;
+		struct blk_desc *desc = NULL;
+
+		for (device_find_first_child(parent, &dev);
+		     dev;
+		     device_find_next_child(&dev)) {
+			if (device_get_uclass_id(dev) == UCLASS_BLK) {
+				desc = dev_get_uclass_plat(dev);
+				break;
+			}
+		}
+
+		if (!desc)
+			return -ENOENT;
+
+		switch (desc->devnum) {
+		case 0:
+			return BOOT_DEVICE_MMC1;
+		case 1:
+			return BOOT_DEVICE_MMC2;
+		default:
+			return -ENOSYS;
+		}
+	} else if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node,
+		&parent)) {
+		return BOOT_DEVICE_SPI;
+	}
+
+	/*
+	 * SPL doesn't differentiate SPI flashes, so we keep the detection
+	 * brief and inaccurate... hopefully, the common SPL layer can be
+	 * extended with awareness of the BLK layer (and matching OF_CONTROL)
+	 * soon.
+	 */
+	if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
+		return BOOT_DEVICE_SPI;
+
+	return -1;
+}
+
+/**
+ * board_spl_was_booted_from() - retrieves the of-path the SPL was loaded from
+ *
+ * To support a 'same-as-spl' specification in the search-order for the next
+ * stage, we need a SoC- or board-specific way to handshake with what 'came
+ * before us' (either a BROM or TPL stage) and map the info retrieved onto
+ * a OF path.
+ *
+ * Returns
+ *   NULL, on failure or if the device could not be identified
+ *   a of_path (a string), on success
+ */
+__weak const char *board_spl_was_booted_from(void)
+{
+	debug("%s: no support for 'same-as-spl' for this board\n", __func__);
+	return NULL;
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	/* In case of no fdt (or only plat), use spl_boot_device() */
+	if (!CONFIG_IS_ENABLED(OF_CONTROL) || CONFIG_IS_ENABLED(OF_PLATDATA)) {
+		spl_boot_list[0] = spl_boot_device();
+		return;
+	}
+
+	const void *blob = gd->fdt_blob;
+	int chosen_node = fdt_path_offset(blob, "/chosen");
+	int idx = 0;
+	int elem;
+	int boot_device;
+	int node;
+	const char *conf;
+
+	if (chosen_node < 0) {
+		debug("%s: /chosen not found, using spl_boot_device()\n",
+		      __func__);
+		spl_boot_list[0] = spl_boot_device();
+		return;
+	}
+
+	for (elem = 0;
+	     (conf = fdt_stringlist_get(blob, chosen_node,
+					"u-boot,spl-boot-order", elem, NULL));
+	     elem++) {
+		const char *alias;
+
+		/* Handle the case of 'same device the SPL was loaded from' */
+		if (strncmp(conf, "same-as-spl", 11) == 0) {
+			conf = board_spl_was_booted_from();
+			if (!conf)
+				continue;
+		}
+
+		/* First check if the list element is an alias */
+		alias = fdt_get_alias(blob, conf);
+		if (alias)
+			conf = alias;
+
+		/* Try to resolve the config item (or alias) as a path */
+		node = fdt_path_offset(blob, conf);
+		if (node < 0) {
+			debug("%s: could not find %s in FDT\n", __func__, conf);
+			continue;
+		}
+
+		/* Try to map this back onto SPL boot devices */
+		boot_device = spl_node_to_boot_device(node);
+		if (boot_device < 0) {
+			debug("%s: could not map node @%x to a boot-device\n",
+			      __func__, node);
+			continue;
+		}
+
+		spl_boot_list[idx++] = boot_device;
+	}
+
+	/* If we had no matches, fall back to spl_boot_device */
+	if (idx == 0)
+		spl_boot_list[0] = spl_boot_device();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/spl.c b/roms/u-boot/arch/arm/mach-rockchip/spl.c
new file mode 100644
index 000000000..02c40fb37
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/spl.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <ram.h>
+#include <spl.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_return_to_bootrom(struct spl_image_info *spl_image,
+			    struct spl_boot_device *bootdev)
+{
+	back_to_bootrom(BROM_BOOT_NEXTSTAGE);
+
+	return 0;
+}
+
+__weak const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+};
+
+const char *board_spl_was_booted_from(void)
+{
+	u32  bootdevice_brom_id = readl(BROM_BOOTSOURCE_ID_ADDR);
+	const char *bootdevice_ofpath = NULL;
+
+	if (bootdevice_brom_id < ARRAY_SIZE(boot_devices))
+		bootdevice_ofpath = boot_devices[bootdevice_brom_id];
+
+	if (bootdevice_ofpath)
+		debug("%s: brom_bootdevice_id %x maps to '%s'\n",
+		      __func__, bootdevice_brom_id, bootdevice_ofpath);
+	else
+		debug("%s: failed to resolve brom_bootdevice_id %x\n",
+		      __func__, bootdevice_brom_id);
+
+	return bootdevice_ofpath;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 boot_device = BOOT_DEVICE_MMC1;
+
+#if defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \
+		defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \
+		defined(CONFIG_TARGET_CHROMEBOOK_MINNIE) || \
+		defined(CONFIG_TARGET_CHROMEBOOK_SPEEDY) || \
+		defined(CONFIG_TARGET_CHROMEBOOK_BOB)
+	return BOOT_DEVICE_SPI;
+#endif
+	if (CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM))
+		return BOOT_DEVICE_BOOTROM;
+
+	return boot_device;
+}
+
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+	return MMCSD_MODE_RAW;
+}
+
+#if !defined(CONFIG_ROCKCHIP_RK3188)
+#define TIMER_LOAD_COUNT_L	0x00
+#define TIMER_LOAD_COUNT_H	0x04
+#define TIMER_CONTROL_REG	0x10
+#define TIMER_EN	0x1
+#define	TIMER_FMODE	BIT(0)
+#define	TIMER_RMODE	BIT(1)
+
+__weak void rockchip_stimer_init(void)
+{
+	/* If Timer already enabled, don't re-init it */
+	u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+
+	if (reg & TIMER_EN)
+		return;
+#ifndef CONFIG_ARM64
+	asm volatile("mcr p15, 0, %0, c14, c0, 0"
+		     : : "r"(COUNTER_FREQUENCY));
+#endif
+	writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
+	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
+	       TIMER_CONTROL_REG);
+}
+#endif
+
+__weak int board_early_init_f(void)
+{
+	return 0;
+}
+
+__weak int arch_cpu_init(void)
+{
+	return 0;
+}
+
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+#ifdef CONFIG_DEBUG_UART
+	/*
+	 * Debug UART can be used from here if required:
+	 *
+	 * debug_uart_init();
+	 * printch('a');
+	 * printhex8(0x1234);
+	 * printascii("string");
+	 */
+	debug_uart_init();
+	debug("\nspl:debug uart enabled in %s\n", __func__);
+#endif
+
+	board_early_init_f();
+
+	ret = spl_early_init();
+	if (ret) {
+		printf("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+	arch_cpu_init();
+#if !defined(CONFIG_ROCKCHIP_RK3188)
+	rockchip_stimer_init();
+#endif
+#ifdef CONFIG_SYS_ARCH_TIMER
+	/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
+	timer_init();
+#endif
+#if !defined(CONFIG_TPL) || defined(CONFIG_SPL_RAM)
+	debug("\nspl:init dram\n");
+	ret = dram_init();
+	if (ret) {
+		printf("DRAM init failed: %d\n", ret);
+		return;
+	}
+	gd->ram_top = gd->ram_base + get_effective_memsize();
+	gd->ram_top = board_get_usable_ram_top(gd->ram_size);
+#endif
+	preloader_console_init();
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/tpl.c b/roms/u-boot/arch/arm/mach-rockchip/tpl.c
new file mode 100644
index 000000000..cc908e1b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/tpl.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <ram.h>
+#include <spl.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <linux/bitops.h>
+
+#define TIMER_LOAD_COUNT_L	0x00
+#define TIMER_LOAD_COUNT_H	0x04
+#define TIMER_CONTROL_REG	0x10
+#define TIMER_EN	0x1
+#define	TIMER_FMODE	BIT(0)
+#define	TIMER_RMODE	BIT(1)
+
+__weak void rockchip_stimer_init(void)
+{
+	/* If Timer already enabled, don't re-init it */
+	u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+
+	if (reg & TIMER_EN)
+		return;
+
+#ifndef CONFIG_ARM64
+	asm volatile("mcr p15, 0, %0, c14, c0, 0"
+		     : : "r"(COUNTER_FREQUENCY));
+#endif
+
+	writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE);
+	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
+	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
+	       TIMER_CONTROL_REG);
+}
+
+void board_init_f(ulong dummy)
+{
+	struct udevice *dev;
+	int ret;
+
+#if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT)
+	/*
+	 * Debug UART can be used from here if required:
+	 *
+	 * debug_uart_init();
+	 * printch('a');
+	 * printhex8(0x1234);
+	 * printascii("string");
+	 */
+	debug_uart_init();
+#ifdef CONFIG_TPL_BANNER_PRINT
+	printascii("\nU-Boot TPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \
+				U_BOOT_TIME ")\n");
+#endif
+#endif
+	ret = spl_early_init();
+	if (ret) {
+		debug("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+
+	/* Init secure timer */
+	rockchip_stimer_init();
+	/* Init ARM arch timer in arch/arm/cpu/ */
+	timer_init();
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		printf("DRAM init failed: %d\n", ret);
+		return;
+	}
+}
+
+int board_return_to_bootrom(struct spl_image_info *spl_image,
+			    struct spl_boot_device *bootdev)
+{
+	back_to_bootrom(BROM_BOOT_NEXTSTAGE);
+
+	return 0;
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_BOOTROM;
+}
diff --git a/roms/u-boot/arch/arm/mach-rockchip/u-boot-tpl-v8.lds b/roms/u-boot/arch/arm/mach-rockchip/u-boot-tpl-v8.lds
new file mode 100644
index 000000000..9869972e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/u-boot-tpl-v8.lds
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier:	GPL-2.0+
+/*
+ * (C) Copyright 2019
+ * Rockchip Electronics Co., Ltd
+ * Kever Yang<kever.yang@rock-chips.com>
+ *
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ */
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	.text : {
+		. = ALIGN(8);
+		*(.__image_copy_start)
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	}
+
+	.rodata : {
+		. = ALIGN(8);
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	}
+
+	.data : {
+		. = ALIGN(8);
+		*(.data*)
+	}
+
+	.u_boot_list : {
+		. = ALIGN(8);
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	.image_copy_end : {
+		. = ALIGN(8);
+		*(.__image_copy_end)
+	}
+
+	.end : {
+		. = ALIGN(8);
+		*(.__end)
+	}
+
+	_image_binary_end = .;
+
+	.bss_start (NOLOAD) : {
+		. = ALIGN(8);
+		KEEP(*(.__bss_start));
+	}
+
+	.bss (NOLOAD) : {
+		*(.bss*)
+		 . = ALIGN(8);
+	}
+
+	.bss_end (NOLOAD) : {
+		KEEP(*(.__bss_end));
+	}
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
+
+#if defined(CONFIG_TPL_MAX_SIZE)
+ASSERT(__image_copy_end - __image_copy_start < (CONFIG_TPL_MAX_SIZE), \
+	"TPL image too big");
+#endif
+
+#if defined(CONFIG_TPL_BSS_MAX_SIZE)
+ASSERT(__bss_end - __bss_start < (CONFIG_TPL_BSS_MAX_SIZE), \
+	"TPL image BSS too big");
+#endif
+
+#if defined(CONFIG_TPL_MAX_FOOTPRINT)
+ASSERT(__bss_end - _start < (CONFIG_TPL_MAX_FOOTPRINT), \
+	"TPL image plus BSS too big");
+#endif
diff --git a/roms/u-boot/arch/arm/mach-rockchip/u-boot-tpl.lds b/roms/u-boot/arch/arm/mach-rockchip/u-boot-tpl.lds
new file mode 100644
index 000000000..f5a89721c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-rockchip/u-boot-tpl.lds
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier:	GPL-2.0+
+/*
+ * Copyright (C) 2019 Rockchip Electronic Co.,Ltd
+ */
+
+#undef CONFIG_SPL_TEXT_BASE
+#define CONFIG_SPL_TEXT_BASE CONFIG_TPL_TEXT_BASE
+
+#undef CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_MAX_SIZE CONFIG_TPL_MAX_SIZE
+
+#include "../cpu/u-boot-spl.lds"
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/Kconfig b/roms/u-boot/arch/arm/mach-s5pc1xx/Kconfig
new file mode 100644
index 000000000..8cffced55
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/Kconfig
@@ -0,0 +1,25 @@
+if ARCH_S5PC1XX
+
+choice
+	prompt "S5PC1XX board select"
+	optional
+
+config TARGET_S5P_GONI
+	bool "S5P Goni board"
+	select OF_CONTROL
+	select BLK
+	select DM_MMC
+
+config TARGET_SMDKC100
+	bool "Support smdkc100 board"
+	select OF_CONTROL
+
+endchoice
+
+config SYS_SOC
+	default "s5pc1xx"
+
+source "board/samsung/goni/Kconfig"
+source "board/samsung/smdkc100/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/Makefile b/roms/u-boot/arch/arm/mach-s5pc1xx/Makefile
new file mode 100644
index 000000000..ab804604d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+
+obj-y	= cache.o
+obj-y	+= reset.o
+
+obj-y	+= clock.o
+obj-y	+= pinmux.o
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/cache.c b/roms/u-boot/arch/arm/mach-s5pc1xx/cache.c
new file mode 100644
index 000000000..b390bdf82
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/cache.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * based on arch/arm/cpu/armv7/omap3/cache.S
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/cache.h>
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+	dcache_enable();
+}
+
+void disable_caches(void)
+{
+	dcache_disable();
+}
+#endif
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+void v7_outer_cache_enable(void)
+{
+	__asm(
+		"push    {r0, r1, r2, lr}\n\t"
+		"mrc     15, 0, r3, cr1, cr0, 1\n\t"
+		"orr     r3, r3, #2\n\t"
+		"mcr     15, 0, r3, cr1, cr0, 1\n\t"
+		"pop     {r1, r2, r3, pc}"
+	);
+}
+
+void v7_outer_cache_disable(void)
+{
+	__asm(
+		"push    {r0, r1, r2, lr}\n\t"
+		"mrc     15, 0, r3, cr1, cr0, 1\n\t"
+		"bic     r3, r3, #2\n\t"
+		"mcr     15, 0, r3, cr1, cr0, 1\n\t"
+		"pop     {r1, r2, r3, pc}"
+	);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/clock.c b/roms/u-boot/arch/arm/mach-s5pc1xx/clock.c
new file mode 100644
index 000000000..555228a52
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/clock.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+
+#define CLK_M	0
+#define CLK_D	1
+#define CLK_P	2
+
+#ifndef CONFIG_SYS_CLK_FREQ_C100
+#define CONFIG_SYS_CLK_FREQ_C100	12000000
+#endif
+#ifndef CONFIG_SYS_CLK_FREQ_C110
+#define CONFIG_SYS_CLK_FREQ_C110	24000000
+#endif
+
+/* s5pc110: return pll clock frequency */
+static unsigned long s5pc100_get_pll_clk(int pllreg)
+{
+	struct s5pc100_clock *clk =
+		(struct s5pc100_clock *)samsung_get_base_clock();
+	unsigned long r, m, p, s, mask, fout;
+	unsigned int freq;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con);
+		break;
+	case HPLL:
+		r = readl(&clk->hpll_con);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	/*
+	 * APLL_CON: MIDV [25:16]
+	 * MPLL_CON: MIDV [23:16]
+	 * EPLL_CON: MIDV [23:16]
+	 * HPLL_CON: MIDV [23:16]
+	 */
+	if (pllreg == APLL)
+		mask = 0x3ff;
+	else
+		mask = 0x0ff;
+
+	m = (r >> 16) & mask;
+
+	/* PDIV [13:8] */
+	p = (r >> 8) & 0x3f;
+	/* SDIV [2:0] */
+	s = r & 0x7;
+
+	/* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
+	freq = CONFIG_SYS_CLK_FREQ_C100;
+	fout = m * (freq / (p * (1 << s)));
+
+	return fout;
+}
+
+/* s5pc100: return pll clock frequency */
+static unsigned long s5pc110_get_pll_clk(int pllreg)
+{
+	struct s5pc110_clock *clk =
+		(struct s5pc110_clock *)samsung_get_base_clock();
+	unsigned long r, m, p, s, mask, fout;
+	unsigned int freq;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con);
+		break;
+	case VPLL:
+		r = readl(&clk->vpll_con);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	/*
+	 * APLL_CON: MIDV [25:16]
+	 * MPLL_CON: MIDV [25:16]
+	 * EPLL_CON: MIDV [24:16]
+	 * VPLL_CON: MIDV [24:16]
+	 */
+	if (pllreg == APLL || pllreg == MPLL)
+		mask = 0x3ff;
+	else
+		mask = 0x1ff;
+
+	m = (r >> 16) & mask;
+
+	/* PDIV [13:8] */
+	p = (r >> 8) & 0x3f;
+	/* SDIV [2:0] */
+	s = r & 0x7;
+
+	freq = CONFIG_SYS_CLK_FREQ_C110;
+	if (pllreg == APLL) {
+		if (s < 1)
+			s = 1;
+		/* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */
+		fout = m * (freq / (p * (1 << (s - 1))));
+	} else
+		/* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
+		fout = m * (freq / (p * (1 << s)));
+
+	return fout;
+}
+
+/* s5pc110: return ARM clock frequency */
+static unsigned long s5pc110_get_arm_clk(void)
+{
+	struct s5pc110_clock *clk =
+		(struct s5pc110_clock *)samsung_get_base_clock();
+	unsigned long div;
+	unsigned long dout_apll, armclk;
+	unsigned int apll_ratio;
+
+	div = readl(&clk->div0);
+
+	/* APLL_RATIO: [2:0] */
+	apll_ratio = div & 0x7;
+
+	dout_apll = get_pll_clk(APLL) / (apll_ratio + 1);
+	armclk = dout_apll;
+
+	return armclk;
+}
+
+/* s5pc100: return ARM clock frequency */
+static unsigned long s5pc100_get_arm_clk(void)
+{
+	struct s5pc100_clock *clk =
+		(struct s5pc100_clock *)samsung_get_base_clock();
+	unsigned long div;
+	unsigned long dout_apll, armclk;
+	unsigned int apll_ratio, arm_ratio;
+
+	div = readl(&clk->div0);
+
+	/* ARM_RATIO: [6:4] */
+	arm_ratio = (div >> 4) & 0x7;
+	/* APLL_RATIO: [0] */
+	apll_ratio = div & 0x1;
+
+	dout_apll = get_pll_clk(APLL) / (apll_ratio + 1);
+	armclk = dout_apll / (arm_ratio + 1);
+
+	return armclk;
+}
+
+/* s5pc100: return HCLKD0 frequency */
+static unsigned long get_hclk(void)
+{
+	struct s5pc100_clock *clk =
+		(struct s5pc100_clock *)samsung_get_base_clock();
+	unsigned long hclkd0;
+	uint div, d0_bus_ratio;
+
+	div = readl(&clk->div0);
+	/* D0_BUS_RATIO: [10:8] */
+	d0_bus_ratio = (div >> 8) & 0x7;
+
+	hclkd0 = get_arm_clk() / (d0_bus_ratio + 1);
+
+	return hclkd0;
+}
+
+/* s5pc100: return PCLKD1 frequency */
+static unsigned long get_pclkd1(void)
+{
+	struct s5pc100_clock *clk =
+		(struct s5pc100_clock *)samsung_get_base_clock();
+	unsigned long d1_bus, pclkd1;
+	uint div, d1_bus_ratio, pclkd1_ratio;
+
+	div = readl(&clk->div0);
+	/* D1_BUS_RATIO: [14:12] */
+	d1_bus_ratio = (div >> 12) & 0x7;
+	/* PCLKD1_RATIO: [18:16] */
+	pclkd1_ratio = (div >> 16) & 0x7;
+
+	/* ASYNC Mode */
+	d1_bus = get_pll_clk(MPLL) / (d1_bus_ratio + 1);
+	pclkd1 = d1_bus / (pclkd1_ratio + 1);
+
+	return pclkd1;
+}
+
+/* s5pc110: return HCLKs frequency */
+static unsigned long get_hclk_sys(int dom)
+{
+	struct s5pc110_clock *clk =
+		(struct s5pc110_clock *)samsung_get_base_clock();
+	unsigned long hclk;
+	unsigned int div;
+	unsigned int offset;
+	unsigned int hclk_sys_ratio;
+
+	if (dom == CLK_M)
+		return get_hclk();
+
+	div = readl(&clk->div0);
+
+	/*
+	 * HCLK_MSYS_RATIO: [10:8]
+	 * HCLK_DSYS_RATIO: [19:16]
+	 * HCLK_PSYS_RATIO: [27:24]
+	 */
+	offset = 8 + (dom << 0x3);
+
+	hclk_sys_ratio = (div >> offset) & 0xf;
+
+	hclk = get_pll_clk(MPLL) / (hclk_sys_ratio + 1);
+
+	return hclk;
+}
+
+/* s5pc110: return PCLKs frequency */
+static unsigned long get_pclk_sys(int dom)
+{
+	struct s5pc110_clock *clk =
+		(struct s5pc110_clock *)samsung_get_base_clock();
+	unsigned long pclk;
+	unsigned int div;
+	unsigned int offset;
+	unsigned int pclk_sys_ratio;
+
+	div = readl(&clk->div0);
+
+	/*
+	 * PCLK_MSYS_RATIO: [14:12]
+	 * PCLK_DSYS_RATIO: [22:20]
+	 * PCLK_PSYS_RATIO: [30:28]
+	 */
+	offset = 12 + (dom << 0x3);
+
+	pclk_sys_ratio = (div >> offset) & 0x7;
+
+	pclk = get_hclk_sys(dom) / (pclk_sys_ratio + 1);
+
+	return pclk;
+}
+
+/* s5pc110: return peripheral clock frequency */
+static unsigned long s5pc110_get_pclk(void)
+{
+	return get_pclk_sys(CLK_P);
+}
+
+/* s5pc100: return peripheral clock frequency */
+static unsigned long s5pc100_get_pclk(void)
+{
+	return get_pclkd1();
+}
+
+/* s5pc1xx: return uart clock frequency */
+static unsigned long s5pc1xx_get_uart_clk(int dev_index)
+{
+	if (cpu_is_s5pc110())
+		return s5pc110_get_pclk();
+	else
+		return s5pc100_get_pclk();
+}
+
+/* s5pc1xx: return pwm clock frequency */
+static unsigned long s5pc1xx_get_pwm_clk(void)
+{
+	if (cpu_is_s5pc110())
+		return s5pc110_get_pclk();
+	else
+		return s5pc100_get_pclk();
+}
+
+unsigned long get_pll_clk(int pllreg)
+{
+	if (cpu_is_s5pc110())
+		return s5pc110_get_pll_clk(pllreg);
+	else
+		return s5pc100_get_pll_clk(pllreg);
+}
+
+unsigned long get_arm_clk(void)
+{
+	if (cpu_is_s5pc110())
+		return s5pc110_get_arm_clk();
+	else
+		return s5pc100_get_arm_clk();
+}
+
+unsigned long get_pwm_clk(void)
+{
+	return s5pc1xx_get_pwm_clk();
+}
+
+unsigned long get_uart_clk(int dev_index)
+{
+	return s5pc1xx_get_uart_clk(dev_index);
+}
+
+void set_mmc_clk(int dev_index, unsigned int div)
+{
+	/* Do NOTHING */
+}
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/clk.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/clk.h
new file mode 100644
index 000000000..8f22c0b1c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/clk.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_CLK_H_
+#define __ASM_ARM_ARCH_CLK_H_
+
+#define APLL	0
+#define MPLL	1
+#define EPLL	2
+#define HPLL	3
+#define VPLL	4
+
+unsigned long get_pll_clk(int pllreg);
+unsigned long get_arm_clk(void);
+unsigned long get_pwm_clk(void);
+unsigned long get_uart_clk(int dev_index);
+void set_mmc_clk(int dev_index, unsigned int div);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/clock.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/clock.h
new file mode 100644
index 000000000..079d5238d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/clock.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_CLOCK_H_
+#define __ASM_ARM_ARCH_CLOCK_H_
+
+#ifndef __ASSEMBLY__
+struct s5pc100_clock {
+	unsigned int	apll_lock;
+	unsigned int	mpll_lock;
+	unsigned int	epll_lock;
+	unsigned int	hpll_lock;
+	unsigned char	res1[0xf0];
+	unsigned int	apll_con;
+	unsigned int	mpll_con;
+	unsigned int	epll_con;
+	unsigned int	hpll_con;
+	unsigned char	res2[0xf0];
+	unsigned int	src0;
+	unsigned int	src1;
+	unsigned int	src2;
+	unsigned int	src3;
+	unsigned char	res3[0xf0];
+	unsigned int	div0;
+	unsigned int	div1;
+	unsigned int	div2;
+	unsigned int	div3;
+	unsigned int	div4;
+	unsigned char	res4[0x1ec];
+	unsigned int	gate_d00;
+	unsigned int	gate_d01;
+	unsigned int	gate_d02;
+	unsigned char	res5[0x54];
+	unsigned int	gate_sclk0;
+	unsigned int	gate_sclk1;
+};
+
+struct s5pc110_clock {
+	unsigned int	apll_lock;
+	unsigned char	res1[0x4];
+	unsigned int	mpll_lock;
+	unsigned char	res2[0x4];
+	unsigned int	epll_lock;
+	unsigned char	res3[0xc];
+	unsigned int	vpll_lock;
+	unsigned char	res4[0xdc];
+	unsigned int	apll_con;
+	unsigned char	res5[0x4];
+	unsigned int	mpll_con;
+	unsigned char	res6[0x4];
+	unsigned int	epll_con;
+	unsigned char	res7[0xc];
+	unsigned int	vpll_con;
+	unsigned char	res8[0xdc];
+	unsigned int	src0;
+	unsigned int	src1;
+	unsigned int	src2;
+	unsigned int	src3;
+	unsigned char	res9[0xf0];
+	unsigned int	div0;
+	unsigned int	div1;
+	unsigned int	div2;
+	unsigned int	div3;
+	unsigned int	div4;
+	unsigned char	res10[0x1ec];
+	unsigned int	gate_d00;
+	unsigned int	gate_d01;
+	unsigned int	gate_d02;
+	unsigned char	res11[0x54];
+	unsigned int	gate_sclk0;
+	unsigned int	gate_sclk1;
+};
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/cpu.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/cpu.h
new file mode 100644
index 000000000..78c905b86
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/cpu.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#ifndef _S5PC1XX_CPU_H
+#define _S5PC1XX_CPU_H
+
+#define S5P_CPU_NAME		"S5P"
+#define S5PC1XX_ADDR_BASE	0xE0000000
+
+/* S5PC100 */
+#define S5PC100_PRO_ID		0xE0000000
+#define S5PC100_CLOCK_BASE	0xE0100000
+#define S5PC100_GPIO_BASE	0xE0300000
+#define S5PC100_VIC0_BASE	0xE4000000
+#define S5PC100_VIC1_BASE	0xE4100000
+#define S5PC100_VIC2_BASE	0xE4200000
+#define S5PC100_DMC_BASE	0xE6000000
+#define S5PC100_SROMC_BASE	0xE7000000
+#define S5PC100_ONENAND_BASE	0xE7100000
+#define S5PC100_PWMTIMER_BASE	0xEA000000
+#define S5PC100_WATCHDOG_BASE	0xEA200000
+#define S5PC100_UART_BASE	0xEC000000
+#define S5PC100_MMC_BASE	0xED800000
+
+/* S5PC110 */
+#define S5PC110_PRO_ID		0xE0000000
+#define S5PC110_CLOCK_BASE	0xE0100000
+#define S5PC110_GPIO_BASE	0xE0200000
+#define S5PC110_PWMTIMER_BASE	0xE2500000
+#define S5PC110_WATCHDOG_BASE	0xE2700000
+#define S5PC110_UART_BASE	0xE2900000
+#define S5PC110_SROMC_BASE	0xE8000000
+#define S5PC110_MMC_BASE	0xEB000000
+#define S5PC110_DMC0_BASE	0xF0000000
+#define S5PC110_DMC1_BASE	0xF1400000
+#define S5PC110_VIC0_BASE	0xF2000000
+#define S5PC110_VIC1_BASE	0xF2100000
+#define S5PC110_VIC2_BASE	0xF2200000
+#define S5PC110_VIC3_BASE	0xF2300000
+#define S5PC110_OTG_BASE	0xEC000000
+#define S5PC110_PHY_BASE	0xEC100000
+#define S5PC110_USB_PHY_CONTROL 0xE010E80C
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+/* CPU detection macros */
+extern unsigned int s5p_cpu_id;
+extern unsigned int s5p_cpu_rev;
+
+static inline int s5p_get_cpu_rev(void)
+{
+	return s5p_cpu_rev;
+}
+
+static inline void s5p_set_cpu_id(void)
+{
+	s5p_cpu_id = readl(S5PC100_PRO_ID);
+	s5p_cpu_rev = s5p_cpu_id & 0x000000FF;
+	s5p_cpu_id = 0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12);
+}
+
+static inline char *s5p_get_cpu_name(void)
+{
+	return S5P_CPU_NAME;
+}
+
+#define IS_SAMSUNG_TYPE(type, id)			\
+static inline int cpu_is_##type(void)			\
+{							\
+	return s5p_cpu_id == id ? 1 : 0;		\
+}
+
+IS_SAMSUNG_TYPE(s5pc100, 0xc100)
+IS_SAMSUNG_TYPE(s5pc110, 0xc110)
+
+#define SAMSUNG_BASE(device, base)				\
+static inline unsigned int samsung_get_base_##device(void)	\
+{								\
+	if (cpu_is_s5pc100())					\
+		return S5PC100_##base;				\
+	else if (cpu_is_s5pc110())				\
+		return S5PC110_##base;				\
+	else							\
+		return 0;					\
+}
+
+SAMSUNG_BASE(clock, CLOCK_BASE)
+SAMSUNG_BASE(gpio, GPIO_BASE)
+SAMSUNG_BASE(pro_id, PRO_ID)
+SAMSUNG_BASE(mmc, MMC_BASE)
+SAMSUNG_BASE(sromc, SROMC_BASE)
+SAMSUNG_BASE(timer, PWMTIMER_BASE)
+SAMSUNG_BASE(uart, UART_BASE)
+SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
+#endif
+
+#endif	/* _S5PC1XX_CPU_H */
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/gpio.h
new file mode 100644
index 000000000..c8dfbdd64
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/gpio.h
@@ -0,0 +1,842 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+struct s5p_gpio_bank {
+	unsigned int	con;
+	unsigned int	dat;
+	unsigned int	pull;
+	unsigned int	drv;
+	unsigned int	pdn_con;
+	unsigned int	pdn_pull;
+	unsigned char	res1[8];
+};
+
+/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
+enum s5pc100_gpio_pin {
+	S5PC100_GPIO_A00,
+	S5PC100_GPIO_A01,
+	S5PC100_GPIO_A02,
+	S5PC100_GPIO_A03,
+	S5PC100_GPIO_A04,
+	S5PC100_GPIO_A05,
+	S5PC100_GPIO_A06,
+	S5PC100_GPIO_A07,
+	S5PC100_GPIO_A10,
+	S5PC100_GPIO_A11,
+	S5PC100_GPIO_A12,
+	S5PC100_GPIO_A13,
+	S5PC100_GPIO_A14,
+	S5PC100_GPIO_A15,
+	S5PC100_GPIO_A16,
+	S5PC100_GPIO_A17,
+	S5PC100_GPIO_B0,
+	S5PC100_GPIO_B1,
+	S5PC100_GPIO_B2,
+	S5PC100_GPIO_B3,
+	S5PC100_GPIO_B4,
+	S5PC100_GPIO_B5,
+	S5PC100_GPIO_B6,
+	S5PC100_GPIO_B7,
+	S5PC100_GPIO_C0,
+	S5PC100_GPIO_C1,
+	S5PC100_GPIO_C2,
+	S5PC100_GPIO_C3,
+	S5PC100_GPIO_C4,
+	S5PC100_GPIO_C5,
+	S5PC100_GPIO_C6,
+	S5PC100_GPIO_C7,
+	S5PC100_GPIO_D0,
+	S5PC100_GPIO_D1,
+	S5PC100_GPIO_D2,
+	S5PC100_GPIO_D3,
+	S5PC100_GPIO_D4,
+	S5PC100_GPIO_D5,
+	S5PC100_GPIO_D6,
+	S5PC100_GPIO_D7,
+	S5PC100_GPIO_E00,
+	S5PC100_GPIO_E01,
+	S5PC100_GPIO_E02,
+	S5PC100_GPIO_E03,
+	S5PC100_GPIO_E04,
+	S5PC100_GPIO_E05,
+	S5PC100_GPIO_E06,
+	S5PC100_GPIO_E07,
+	S5PC100_GPIO_E10,
+	S5PC100_GPIO_E11,
+	S5PC100_GPIO_E12,
+	S5PC100_GPIO_E13,
+	S5PC100_GPIO_E14,
+	S5PC100_GPIO_E15,
+	S5PC100_GPIO_E16,
+	S5PC100_GPIO_E17,
+	S5PC100_GPIO_F00,
+	S5PC100_GPIO_F01,
+	S5PC100_GPIO_F02,
+	S5PC100_GPIO_F03,
+	S5PC100_GPIO_F04,
+	S5PC100_GPIO_F05,
+	S5PC100_GPIO_F06,
+	S5PC100_GPIO_F07,
+	S5PC100_GPIO_F10,
+	S5PC100_GPIO_F11,
+	S5PC100_GPIO_F12,
+	S5PC100_GPIO_F13,
+	S5PC100_GPIO_F14,
+	S5PC100_GPIO_F15,
+	S5PC100_GPIO_F16,
+	S5PC100_GPIO_F17,
+	S5PC100_GPIO_F20,
+	S5PC100_GPIO_F21,
+	S5PC100_GPIO_F22,
+	S5PC100_GPIO_F23,
+	S5PC100_GPIO_F24,
+	S5PC100_GPIO_F25,
+	S5PC100_GPIO_F26,
+	S5PC100_GPIO_F27,
+	S5PC100_GPIO_F30,
+	S5PC100_GPIO_F31,
+	S5PC100_GPIO_F32,
+	S5PC100_GPIO_F33,
+	S5PC100_GPIO_F34,
+	S5PC100_GPIO_F35,
+	S5PC100_GPIO_F36,
+	S5PC100_GPIO_F37,
+	S5PC100_GPIO_G00,
+	S5PC100_GPIO_G01,
+	S5PC100_GPIO_G02,
+	S5PC100_GPIO_G03,
+	S5PC100_GPIO_G04,
+	S5PC100_GPIO_G05,
+	S5PC100_GPIO_G06,
+	S5PC100_GPIO_G07,
+	S5PC100_GPIO_G10,
+	S5PC100_GPIO_G11,
+	S5PC100_GPIO_G12,
+	S5PC100_GPIO_G13,
+	S5PC100_GPIO_G14,
+	S5PC100_GPIO_G15,
+	S5PC100_GPIO_G16,
+	S5PC100_GPIO_G17,
+	S5PC100_GPIO_G20,
+	S5PC100_GPIO_G21,
+	S5PC100_GPIO_G22,
+	S5PC100_GPIO_G23,
+	S5PC100_GPIO_G24,
+	S5PC100_GPIO_G25,
+	S5PC100_GPIO_G26,
+	S5PC100_GPIO_G27,
+	S5PC100_GPIO_G30,
+	S5PC100_GPIO_G31,
+	S5PC100_GPIO_G32,
+	S5PC100_GPIO_G33,
+	S5PC100_GPIO_G34,
+	S5PC100_GPIO_G35,
+	S5PC100_GPIO_G36,
+	S5PC100_GPIO_G37,
+	S5PC100_GPIO_I0,
+	S5PC100_GPIO_I1,
+	S5PC100_GPIO_I2,
+	S5PC100_GPIO_I3,
+	S5PC100_GPIO_I4,
+	S5PC100_GPIO_I5,
+	S5PC100_GPIO_I6,
+	S5PC100_GPIO_I7,
+	S5PC100_GPIO_J00,
+	S5PC100_GPIO_J01,
+	S5PC100_GPIO_J02,
+	S5PC100_GPIO_J03,
+	S5PC100_GPIO_J04,
+	S5PC100_GPIO_J05,
+	S5PC100_GPIO_J06,
+	S5PC100_GPIO_J07,
+	S5PC100_GPIO_J10,
+	S5PC100_GPIO_J11,
+	S5PC100_GPIO_J12,
+	S5PC100_GPIO_J13,
+	S5PC100_GPIO_J14,
+	S5PC100_GPIO_J15,
+	S5PC100_GPIO_J16,
+	S5PC100_GPIO_J17,
+	S5PC100_GPIO_J20,
+	S5PC100_GPIO_J21,
+	S5PC100_GPIO_J22,
+	S5PC100_GPIO_J23,
+	S5PC100_GPIO_J24,
+	S5PC100_GPIO_J25,
+	S5PC100_GPIO_J26,
+	S5PC100_GPIO_J27,
+	S5PC100_GPIO_J30,
+	S5PC100_GPIO_J31,
+	S5PC100_GPIO_J32,
+	S5PC100_GPIO_J33,
+	S5PC100_GPIO_J34,
+	S5PC100_GPIO_J35,
+	S5PC100_GPIO_J36,
+	S5PC100_GPIO_J37,
+	S5PC100_GPIO_J40,
+	S5PC100_GPIO_J41,
+	S5PC100_GPIO_J42,
+	S5PC100_GPIO_J43,
+	S5PC100_GPIO_J44,
+	S5PC100_GPIO_J45,
+	S5PC100_GPIO_J46,
+	S5PC100_GPIO_J47,
+	S5PC100_GPIO_K00,
+	S5PC100_GPIO_K01,
+	S5PC100_GPIO_K02,
+	S5PC100_GPIO_K03,
+	S5PC100_GPIO_K04,
+	S5PC100_GPIO_K05,
+	S5PC100_GPIO_K06,
+	S5PC100_GPIO_K07,
+	S5PC100_GPIO_K10,
+	S5PC100_GPIO_K11,
+	S5PC100_GPIO_K12,
+	S5PC100_GPIO_K13,
+	S5PC100_GPIO_K14,
+	S5PC100_GPIO_K15,
+	S5PC100_GPIO_K16,
+	S5PC100_GPIO_K17,
+	S5PC100_GPIO_K20,
+	S5PC100_GPIO_K21,
+	S5PC100_GPIO_K22,
+	S5PC100_GPIO_K23,
+	S5PC100_GPIO_K24,
+	S5PC100_GPIO_K25,
+	S5PC100_GPIO_K26,
+	S5PC100_GPIO_K27,
+	S5PC100_GPIO_K30,
+	S5PC100_GPIO_K31,
+	S5PC100_GPIO_K32,
+	S5PC100_GPIO_K33,
+	S5PC100_GPIO_K34,
+	S5PC100_GPIO_K35,
+	S5PC100_GPIO_K36,
+	S5PC100_GPIO_K37,
+	S5PC100_GPIO_L00,
+	S5PC100_GPIO_L01,
+	S5PC100_GPIO_L02,
+	S5PC100_GPIO_L03,
+	S5PC100_GPIO_L04,
+	S5PC100_GPIO_L05,
+	S5PC100_GPIO_L06,
+	S5PC100_GPIO_L07,
+	S5PC100_GPIO_L10,
+	S5PC100_GPIO_L11,
+	S5PC100_GPIO_L12,
+	S5PC100_GPIO_L13,
+	S5PC100_GPIO_L14,
+	S5PC100_GPIO_L15,
+	S5PC100_GPIO_L16,
+	S5PC100_GPIO_L17,
+	S5PC100_GPIO_L20,
+	S5PC100_GPIO_L21,
+	S5PC100_GPIO_L22,
+	S5PC100_GPIO_L23,
+	S5PC100_GPIO_L24,
+	S5PC100_GPIO_L25,
+	S5PC100_GPIO_L26,
+	S5PC100_GPIO_L27,
+	S5PC100_GPIO_L30,
+	S5PC100_GPIO_L31,
+	S5PC100_GPIO_L32,
+	S5PC100_GPIO_L33,
+	S5PC100_GPIO_L34,
+	S5PC100_GPIO_L35,
+	S5PC100_GPIO_L36,
+	S5PC100_GPIO_L37,
+	S5PC100_GPIO_L40,
+	S5PC100_GPIO_L41,
+	S5PC100_GPIO_L42,
+	S5PC100_GPIO_L43,
+	S5PC100_GPIO_L44,
+	S5PC100_GPIO_L45,
+	S5PC100_GPIO_L46,
+	S5PC100_GPIO_L47,
+	S5PC100_GPIO_H00,
+	S5PC100_GPIO_H01,
+	S5PC100_GPIO_H02,
+	S5PC100_GPIO_H03,
+	S5PC100_GPIO_H04,
+	S5PC100_GPIO_H05,
+	S5PC100_GPIO_H06,
+	S5PC100_GPIO_H07,
+	S5PC100_GPIO_H10,
+	S5PC100_GPIO_H11,
+	S5PC100_GPIO_H12,
+	S5PC100_GPIO_H13,
+	S5PC100_GPIO_H14,
+	S5PC100_GPIO_H15,
+	S5PC100_GPIO_H16,
+	S5PC100_GPIO_H17,
+	S5PC100_GPIO_H20,
+	S5PC100_GPIO_H21,
+	S5PC100_GPIO_H22,
+	S5PC100_GPIO_H23,
+	S5PC100_GPIO_H24,
+	S5PC100_GPIO_H25,
+	S5PC100_GPIO_H26,
+	S5PC100_GPIO_H27,
+	S5PC100_GPIO_H30,
+	S5PC100_GPIO_H31,
+	S5PC100_GPIO_H32,
+	S5PC100_GPIO_H33,
+	S5PC100_GPIO_H34,
+	S5PC100_GPIO_H35,
+	S5PC100_GPIO_H36,
+	S5PC100_GPIO_H37,
+
+	S5PC100_GPIO_MAX_PORT
+};
+
+enum s5pc110_gpio_pin {
+	S5PC110_GPIO_A00,
+	S5PC110_GPIO_A01,
+	S5PC110_GPIO_A02,
+	S5PC110_GPIO_A03,
+	S5PC110_GPIO_A04,
+	S5PC110_GPIO_A05,
+	S5PC110_GPIO_A06,
+	S5PC110_GPIO_A07,
+	S5PC110_GPIO_A10,
+	S5PC110_GPIO_A11,
+	S5PC110_GPIO_A12,
+	S5PC110_GPIO_A13,
+	S5PC110_GPIO_A14,
+	S5PC110_GPIO_A15,
+	S5PC110_GPIO_A16,
+	S5PC110_GPIO_A17,
+	S5PC110_GPIO_B0,
+	S5PC110_GPIO_B1,
+	S5PC110_GPIO_B2,
+	S5PC110_GPIO_B3,
+	S5PC110_GPIO_B4,
+	S5PC110_GPIO_B5,
+	S5PC110_GPIO_B6,
+	S5PC110_GPIO_B7,
+	S5PC110_GPIO_C00,
+	S5PC110_GPIO_C01,
+	S5PC110_GPIO_C02,
+	S5PC110_GPIO_C03,
+	S5PC110_GPIO_C04,
+	S5PC110_GPIO_C05,
+	S5PC110_GPIO_C06,
+	S5PC110_GPIO_C07,
+	S5PC110_GPIO_C10,
+	S5PC110_GPIO_C11,
+	S5PC110_GPIO_C12,
+	S5PC110_GPIO_C13,
+	S5PC110_GPIO_C14,
+	S5PC110_GPIO_C15,
+	S5PC110_GPIO_C16,
+	S5PC110_GPIO_C17,
+	S5PC110_GPIO_D00,
+	S5PC110_GPIO_D01,
+	S5PC110_GPIO_D02,
+	S5PC110_GPIO_D03,
+	S5PC110_GPIO_D04,
+	S5PC110_GPIO_D05,
+	S5PC110_GPIO_D06,
+	S5PC110_GPIO_D07,
+	S5PC110_GPIO_D10,
+	S5PC110_GPIO_D11,
+	S5PC110_GPIO_D12,
+	S5PC110_GPIO_D13,
+	S5PC110_GPIO_D14,
+	S5PC110_GPIO_D15,
+	S5PC110_GPIO_D16,
+	S5PC110_GPIO_D17,
+	S5PC110_GPIO_E00,
+	S5PC110_GPIO_E01,
+	S5PC110_GPIO_E02,
+	S5PC110_GPIO_E03,
+	S5PC110_GPIO_E04,
+	S5PC110_GPIO_E05,
+	S5PC110_GPIO_E06,
+	S5PC110_GPIO_E07,
+	S5PC110_GPIO_E10,
+	S5PC110_GPIO_E11,
+	S5PC110_GPIO_E12,
+	S5PC110_GPIO_E13,
+	S5PC110_GPIO_E14,
+	S5PC110_GPIO_E15,
+	S5PC110_GPIO_E16,
+	S5PC110_GPIO_E17,
+	S5PC110_GPIO_F00,
+	S5PC110_GPIO_F01,
+	S5PC110_GPIO_F02,
+	S5PC110_GPIO_F03,
+	S5PC110_GPIO_F04,
+	S5PC110_GPIO_F05,
+	S5PC110_GPIO_F06,
+	S5PC110_GPIO_F07,
+	S5PC110_GPIO_F10,
+	S5PC110_GPIO_F11,
+	S5PC110_GPIO_F12,
+	S5PC110_GPIO_F13,
+	S5PC110_GPIO_F14,
+	S5PC110_GPIO_F15,
+	S5PC110_GPIO_F16,
+	S5PC110_GPIO_F17,
+	S5PC110_GPIO_F20,
+	S5PC110_GPIO_F21,
+	S5PC110_GPIO_F22,
+	S5PC110_GPIO_F23,
+	S5PC110_GPIO_F24,
+	S5PC110_GPIO_F25,
+	S5PC110_GPIO_F26,
+	S5PC110_GPIO_F27,
+	S5PC110_GPIO_F30,
+	S5PC110_GPIO_F31,
+	S5PC110_GPIO_F32,
+	S5PC110_GPIO_F33,
+	S5PC110_GPIO_F34,
+	S5PC110_GPIO_F35,
+	S5PC110_GPIO_F36,
+	S5PC110_GPIO_F37,
+	S5PC110_GPIO_G00,
+	S5PC110_GPIO_G01,
+	S5PC110_GPIO_G02,
+	S5PC110_GPIO_G03,
+	S5PC110_GPIO_G04,
+	S5PC110_GPIO_G05,
+	S5PC110_GPIO_G06,
+	S5PC110_GPIO_G07,
+	S5PC110_GPIO_G10,
+	S5PC110_GPIO_G11,
+	S5PC110_GPIO_G12,
+	S5PC110_GPIO_G13,
+	S5PC110_GPIO_G14,
+	S5PC110_GPIO_G15,
+	S5PC110_GPIO_G16,
+	S5PC110_GPIO_G17,
+	S5PC110_GPIO_G20,
+	S5PC110_GPIO_G21,
+	S5PC110_GPIO_G22,
+	S5PC110_GPIO_G23,
+	S5PC110_GPIO_G24,
+	S5PC110_GPIO_G25,
+	S5PC110_GPIO_G26,
+	S5PC110_GPIO_G27,
+	S5PC110_GPIO_G30,
+	S5PC110_GPIO_G31,
+	S5PC110_GPIO_G32,
+	S5PC110_GPIO_G33,
+	S5PC110_GPIO_G34,
+	S5PC110_GPIO_G35,
+	S5PC110_GPIO_G36,
+	S5PC110_GPIO_G37,
+	S5PC110_GPIO_I0,
+	S5PC110_GPIO_I1,
+	S5PC110_GPIO_I2,
+	S5PC110_GPIO_I3,
+	S5PC110_GPIO_I4,
+	S5PC110_GPIO_I5,
+	S5PC110_GPIO_I6,
+	S5PC110_GPIO_I7,
+	S5PC110_GPIO_J00,
+	S5PC110_GPIO_J01,
+	S5PC110_GPIO_J02,
+	S5PC110_GPIO_J03,
+	S5PC110_GPIO_J04,
+	S5PC110_GPIO_J05,
+	S5PC110_GPIO_J06,
+	S5PC110_GPIO_J07,
+	S5PC110_GPIO_J10,
+	S5PC110_GPIO_J11,
+	S5PC110_GPIO_J12,
+	S5PC110_GPIO_J13,
+	S5PC110_GPIO_J14,
+	S5PC110_GPIO_J15,
+	S5PC110_GPIO_J16,
+	S5PC110_GPIO_J17,
+	S5PC110_GPIO_J20,
+	S5PC110_GPIO_J21,
+	S5PC110_GPIO_J22,
+	S5PC110_GPIO_J23,
+	S5PC110_GPIO_J24,
+	S5PC110_GPIO_J25,
+	S5PC110_GPIO_J26,
+	S5PC110_GPIO_J27,
+	S5PC110_GPIO_J30,
+	S5PC110_GPIO_J31,
+	S5PC110_GPIO_J32,
+	S5PC110_GPIO_J33,
+	S5PC110_GPIO_J34,
+	S5PC110_GPIO_J35,
+	S5PC110_GPIO_J36,
+	S5PC110_GPIO_J37,
+	S5PC110_GPIO_J40,
+	S5PC110_GPIO_J41,
+	S5PC110_GPIO_J42,
+	S5PC110_GPIO_J43,
+	S5PC110_GPIO_J44,
+	S5PC110_GPIO_J45,
+	S5PC110_GPIO_J46,
+	S5PC110_GPIO_J47,
+	S5PC110_GPIO_MP010,
+	S5PC110_GPIO_MP011,
+	S5PC110_GPIO_MP012,
+	S5PC110_GPIO_MP013,
+	S5PC110_GPIO_MP014,
+	S5PC110_GPIO_MP015,
+	S5PC110_GPIO_MP016,
+	S5PC110_GPIO_MP017,
+	S5PC110_GPIO_MP020,
+	S5PC110_GPIO_MP021,
+	S5PC110_GPIO_MP022,
+	S5PC110_GPIO_MP023,
+	S5PC110_GPIO_MP024,
+	S5PC110_GPIO_MP025,
+	S5PC110_GPIO_MP026,
+	S5PC110_GPIO_MP027,
+	S5PC110_GPIO_MP030,
+	S5PC110_GPIO_MP031,
+	S5PC110_GPIO_MP032,
+	S5PC110_GPIO_MP033,
+	S5PC110_GPIO_MP034,
+	S5PC110_GPIO_MP035,
+	S5PC110_GPIO_MP036,
+	S5PC110_GPIO_MP037,
+	S5PC110_GPIO_MP040,
+	S5PC110_GPIO_MP041,
+	S5PC110_GPIO_MP042,
+	S5PC110_GPIO_MP043,
+	S5PC110_GPIO_MP044,
+	S5PC110_GPIO_MP045,
+	S5PC110_GPIO_MP046,
+	S5PC110_GPIO_MP047,
+	S5PC110_GPIO_MP050,
+	S5PC110_GPIO_MP051,
+	S5PC110_GPIO_MP052,
+	S5PC110_GPIO_MP053,
+	S5PC110_GPIO_MP054,
+	S5PC110_GPIO_MP055,
+	S5PC110_GPIO_MP056,
+	S5PC110_GPIO_MP057,
+	S5PC110_GPIO_MP060,
+	S5PC110_GPIO_MP061,
+	S5PC110_GPIO_MP062,
+	S5PC110_GPIO_MP063,
+	S5PC110_GPIO_MP064,
+	S5PC110_GPIO_MP065,
+	S5PC110_GPIO_MP066,
+	S5PC110_GPIO_MP067,
+	S5PC110_GPIO_MP070,
+	S5PC110_GPIO_MP071,
+	S5PC110_GPIO_MP072,
+	S5PC110_GPIO_MP073,
+	S5PC110_GPIO_MP074,
+	S5PC110_GPIO_MP075,
+	S5PC110_GPIO_MP076,
+	S5PC110_GPIO_MP077,
+	S5PC110_GPIO_MP100,
+	S5PC110_GPIO_MP101,
+	S5PC110_GPIO_MP102,
+	S5PC110_GPIO_MP103,
+	S5PC110_GPIO_MP104,
+	S5PC110_GPIO_MP105,
+	S5PC110_GPIO_MP106,
+	S5PC110_GPIO_MP107,
+	S5PC110_GPIO_MP110,
+	S5PC110_GPIO_MP111,
+	S5PC110_GPIO_MP112,
+	S5PC110_GPIO_MP113,
+	S5PC110_GPIO_MP114,
+	S5PC110_GPIO_MP115,
+	S5PC110_GPIO_MP116,
+	S5PC110_GPIO_MP117,
+	S5PC110_GPIO_MP120,
+	S5PC110_GPIO_MP121,
+	S5PC110_GPIO_MP122,
+	S5PC110_GPIO_MP123,
+	S5PC110_GPIO_MP124,
+	S5PC110_GPIO_MP125,
+	S5PC110_GPIO_MP126,
+	S5PC110_GPIO_MP127,
+	S5PC110_GPIO_MP130,
+	S5PC110_GPIO_MP131,
+	S5PC110_GPIO_MP132,
+	S5PC110_GPIO_MP133,
+	S5PC110_GPIO_MP134,
+	S5PC110_GPIO_MP135,
+	S5PC110_GPIO_MP136,
+	S5PC110_GPIO_MP137,
+	S5PC110_GPIO_MP140,
+	S5PC110_GPIO_MP141,
+	S5PC110_GPIO_MP142,
+	S5PC110_GPIO_MP143,
+	S5PC110_GPIO_MP144,
+	S5PC110_GPIO_MP145,
+	S5PC110_GPIO_MP146,
+	S5PC110_GPIO_MP147,
+	S5PC110_GPIO_MP150,
+	S5PC110_GPIO_MP151,
+	S5PC110_GPIO_MP152,
+	S5PC110_GPIO_MP153,
+	S5PC110_GPIO_MP154,
+	S5PC110_GPIO_MP155,
+	S5PC110_GPIO_MP156,
+	S5PC110_GPIO_MP157,
+	S5PC110_GPIO_MP160,
+	S5PC110_GPIO_MP161,
+	S5PC110_GPIO_MP162,
+	S5PC110_GPIO_MP163,
+	S5PC110_GPIO_MP164,
+	S5PC110_GPIO_MP165,
+	S5PC110_GPIO_MP166,
+	S5PC110_GPIO_MP167,
+	S5PC110_GPIO_MP170,
+	S5PC110_GPIO_MP171,
+	S5PC110_GPIO_MP172,
+	S5PC110_GPIO_MP173,
+	S5PC110_GPIO_MP174,
+	S5PC110_GPIO_MP175,
+	S5PC110_GPIO_MP176,
+	S5PC110_GPIO_MP177,
+	S5PC110_GPIO_MP180,
+	S5PC110_GPIO_MP181,
+	S5PC110_GPIO_MP182,
+	S5PC110_GPIO_MP183,
+	S5PC110_GPIO_MP184,
+	S5PC110_GPIO_MP185,
+	S5PC110_GPIO_MP186,
+	S5PC110_GPIO_MP187,
+	S5PC110_GPIO_MP200,
+	S5PC110_GPIO_MP201,
+	S5PC110_GPIO_MP202,
+	S5PC110_GPIO_MP203,
+	S5PC110_GPIO_MP204,
+	S5PC110_GPIO_MP205,
+	S5PC110_GPIO_MP206,
+	S5PC110_GPIO_MP207,
+	S5PC110_GPIO_MP210,
+	S5PC110_GPIO_MP211,
+	S5PC110_GPIO_MP212,
+	S5PC110_GPIO_MP213,
+	S5PC110_GPIO_MP214,
+	S5PC110_GPIO_MP215,
+	S5PC110_GPIO_MP216,
+	S5PC110_GPIO_MP217,
+	S5PC110_GPIO_MP220,
+	S5PC110_GPIO_MP221,
+	S5PC110_GPIO_MP222,
+	S5PC110_GPIO_MP223,
+	S5PC110_GPIO_MP224,
+	S5PC110_GPIO_MP225,
+	S5PC110_GPIO_MP226,
+	S5PC110_GPIO_MP227,
+	S5PC110_GPIO_MP230,
+	S5PC110_GPIO_MP231,
+	S5PC110_GPIO_MP232,
+	S5PC110_GPIO_MP233,
+	S5PC110_GPIO_MP234,
+	S5PC110_GPIO_MP235,
+	S5PC110_GPIO_MP236,
+	S5PC110_GPIO_MP237,
+	S5PC110_GPIO_MP240,
+	S5PC110_GPIO_MP241,
+	S5PC110_GPIO_MP242,
+	S5PC110_GPIO_MP243,
+	S5PC110_GPIO_MP244,
+	S5PC110_GPIO_MP245,
+	S5PC110_GPIO_MP246,
+	S5PC110_GPIO_MP247,
+	S5PC110_GPIO_MP250,
+	S5PC110_GPIO_MP251,
+	S5PC110_GPIO_MP252,
+	S5PC110_GPIO_MP253,
+	S5PC110_GPIO_MP254,
+	S5PC110_GPIO_MP255,
+	S5PC110_GPIO_MP256,
+	S5PC110_GPIO_MP257,
+	S5PC110_GPIO_MP260,
+	S5PC110_GPIO_MP261,
+	S5PC110_GPIO_MP262,
+	S5PC110_GPIO_MP263,
+	S5PC110_GPIO_MP264,
+	S5PC110_GPIO_MP265,
+	S5PC110_GPIO_MP266,
+	S5PC110_GPIO_MP267,
+	S5PC110_GPIO_MP270,
+	S5PC110_GPIO_MP271,
+	S5PC110_GPIO_MP272,
+	S5PC110_GPIO_MP273,
+	S5PC110_GPIO_MP274,
+	S5PC110_GPIO_MP275,
+	S5PC110_GPIO_MP276,
+	S5PC110_GPIO_MP277,
+	S5PC110_GPIO_MP280,
+	S5PC110_GPIO_MP281,
+	S5PC110_GPIO_MP282,
+	S5PC110_GPIO_MP283,
+	S5PC110_GPIO_MP284,
+	S5PC110_GPIO_MP285,
+	S5PC110_GPIO_MP286,
+	S5PC110_GPIO_MP287,
+	S5PC110_GPIO_H00,
+	S5PC110_GPIO_H01,
+	S5PC110_GPIO_H02,
+	S5PC110_GPIO_H03,
+	S5PC110_GPIO_H04,
+	S5PC110_GPIO_H05,
+	S5PC110_GPIO_H06,
+	S5PC110_GPIO_H07,
+	S5PC110_GPIO_H10,
+	S5PC110_GPIO_H11,
+	S5PC110_GPIO_H12,
+	S5PC110_GPIO_H13,
+	S5PC110_GPIO_H14,
+	S5PC110_GPIO_H15,
+	S5PC110_GPIO_H16,
+	S5PC110_GPIO_H17,
+	S5PC110_GPIO_H20,
+	S5PC110_GPIO_H21,
+	S5PC110_GPIO_H22,
+	S5PC110_GPIO_H23,
+	S5PC110_GPIO_H24,
+	S5PC110_GPIO_H25,
+	S5PC110_GPIO_H26,
+	S5PC110_GPIO_H27,
+	S5PC110_GPIO_H30,
+	S5PC110_GPIO_H31,
+	S5PC110_GPIO_H32,
+	S5PC110_GPIO_H33,
+	S5PC110_GPIO_H34,
+	S5PC110_GPIO_H35,
+	S5PC110_GPIO_H36,
+	S5PC110_GPIO_H37,
+
+	S5PC110_GPIO_MAX_PORT
+};
+
+struct gpio_info {
+	unsigned int reg_addr;	/* Address of register for this part */
+	unsigned int max_gpio;	/* Maximum GPIO in this part */
+};
+
+#define S5PC100_GPIO_NUM_PARTS	1
+static struct gpio_info s5pc100_gpio_data[S5PC100_GPIO_NUM_PARTS] = {
+	{ S5PC100_GPIO_BASE, S5PC100_GPIO_MAX_PORT },
+};
+
+#define S5PC110_GPIO_NUM_PARTS	1
+static struct gpio_info s5pc110_gpio_data[S5PC110_GPIO_NUM_PARTS] = {
+	{ S5PC110_GPIO_BASE, S5PC110_GPIO_MAX_PORT },
+};
+
+static inline struct gpio_info *get_gpio_data(void)
+{
+	if (cpu_is_s5pc100())
+		return s5pc100_gpio_data;
+	else if (cpu_is_s5pc110())
+		return s5pc110_gpio_data;
+
+	return NULL;
+}
+
+static inline unsigned int get_bank_num(void)
+{
+	if (cpu_is_s5pc100())
+		return S5PC100_GPIO_NUM_PARTS;
+	else if (cpu_is_s5pc110())
+		return S5PC110_GPIO_NUM_PARTS;
+
+	return 0;
+}
+
+/*
+ * This structure helps mapping symbolic GPIO names into indices from
+ * exynos5_gpio_pin/exynos5420_gpio_pin enums.
+ *
+ * By convention, symbolic GPIO name is defined as follows:
+ *
+ * g[p]<bank><set><bit>, where
+ *   p is optional
+ *   <bank> - a single character bank name, as defined by the SOC
+ *   <set> - a single digit set number
+ *   <bit> - bit number within the set (in 0..7 range).
+ *
+ * <set><bit> essentially form an octal number of the GPIO pin within the bank
+ * space. On the 5420 architecture some banks' sets do not start not from zero
+ * ('d' starts from 1 and 'j' starts from 4). To compensate for that and
+ * maintain flat number space withoout holes, those banks use offsets to be
+ * deducted from the pin number.
+ */
+struct gpio_name_num_table {
+	char bank;		/* bank name symbol */
+	u8 bank_size;		/* total number of pins in the bank */
+	char bank_offset;	/* offset of the first bank's pin */
+	unsigned int base;	/* index of the first bank's pin in the enum */
+};
+
+#define GPIO_PER_BANK 8
+#define GPIO_ENTRY(name, base, top, offset) { name, top - base, offset, base }
+static const struct gpio_name_num_table s5pc100_gpio_table[] = {
+	GPIO_ENTRY('a', S5PC100_GPIO_A00, S5PC100_GPIO_B0, 0),
+	GPIO_ENTRY('b', S5PC100_GPIO_B0, S5PC100_GPIO_C0, 0),
+	GPIO_ENTRY('c', S5PC100_GPIO_C0, S5PC100_GPIO_D0, 0),
+	GPIO_ENTRY('d', S5PC100_GPIO_D0, S5PC100_GPIO_E00, 0),
+	GPIO_ENTRY('e', S5PC100_GPIO_E00, S5PC100_GPIO_F00, 0),
+	GPIO_ENTRY('f', S5PC100_GPIO_F00, S5PC100_GPIO_G00, 0),
+	GPIO_ENTRY('g', S5PC100_GPIO_G00, S5PC100_GPIO_I0, 0),
+	GPIO_ENTRY('i', S5PC100_GPIO_I0, S5PC100_GPIO_J00, 0),
+	GPIO_ENTRY('j', S5PC100_GPIO_J00, S5PC100_GPIO_K00, 0),
+	GPIO_ENTRY('k', S5PC100_GPIO_K00, S5PC100_GPIO_L00, 0),
+	GPIO_ENTRY('l', S5PC100_GPIO_L00, S5PC100_GPIO_H00, 0),
+	GPIO_ENTRY('h', S5PC100_GPIO_H00, S5PC100_GPIO_MAX_PORT, 0),
+	{ 0 }
+};
+
+static const struct gpio_name_num_table s5pc110_gpio_table[] = {
+	GPIO_ENTRY('a', S5PC110_GPIO_A00, S5PC110_GPIO_B0, 0),
+	GPIO_ENTRY('b', S5PC110_GPIO_B0, S5PC110_GPIO_C00, 0),
+	GPIO_ENTRY('c', S5PC110_GPIO_C00, S5PC110_GPIO_D00, 0),
+	GPIO_ENTRY('d', S5PC110_GPIO_D00, S5PC110_GPIO_E00, 0),
+	GPIO_ENTRY('e', S5PC110_GPIO_E00, S5PC110_GPIO_F00, 0),
+	GPIO_ENTRY('f', S5PC110_GPIO_F00, S5PC110_GPIO_G00, 0),
+	GPIO_ENTRY('g', S5PC110_GPIO_G00, S5PC110_GPIO_I0, 0),
+	GPIO_ENTRY('i', S5PC110_GPIO_I0, S5PC110_GPIO_J00, 0),
+	GPIO_ENTRY('j', S5PC110_GPIO_J00, S5PC110_GPIO_MP010, 0),
+	GPIO_ENTRY('h', S5PC110_GPIO_H00, S5PC110_GPIO_MAX_PORT, 0),
+	{ 0 }
+};
+
+/* functions */
+void gpio_cfg_pin(int gpio, int cfg);
+void gpio_set_pull(int gpio, int mode);
+void gpio_set_drv(int gpio, int mode);
+void gpio_set_rate(int gpio, int mode);
+int s5p_gpio_get_pin(unsigned gpio);
+
+/* GPIO pins per bank  */
+#define GPIO_PER_BANK 8
+#endif
+
+/* Pin configurations */
+#define S5P_GPIO_INPUT	0x0
+#define S5P_GPIO_OUTPUT	0x1
+#define S5P_GPIO_IRQ	0xf
+#define S5P_GPIO_FUNC(x)	(x)
+
+/* Pull mode */
+#define S5P_GPIO_PULL_NONE	0x0
+#define S5P_GPIO_PULL_DOWN	0x1
+#define S5P_GPIO_PULL_UP	0x2
+
+/* Drive Strength level */
+#define S5P_GPIO_DRV_1X	0x0
+#define S5P_GPIO_DRV_3X	0x1
+#define S5P_GPIO_DRV_2X	0x2
+#define S5P_GPIO_DRV_4X	0x3
+#define S5P_GPIO_DRV_FAST	0x0
+#define S5P_GPIO_DRV_SLOW	0x1
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/mmc.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/mmc.h
new file mode 100644
index 000000000..707879086
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/mmc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_MMC_H_
+#define __ASM_ARCH_MMC_H_
+
+#define S5P_MMC_DEV_OFFSET	0x100000
+
+#define SDHCI_CONTROL2		0x80
+#define SDHCI_CONTROL3		0x84
+#define SDHCI_CONTROL4		0x8C
+
+#define SDHCI_CTRL2_ENSTAASYNCCLR	(1 << 31)
+#define SDHCI_CTRL2_ENCMDCNFMSK		(1 << 30)
+#define SDHCI_CTRL2_CDINVRXD3		(1 << 29)
+#define SDHCI_CTRL2_SLCARDOUT		(1 << 28)
+
+#define SDHCI_CTRL2_FLTCLKSEL_MASK	(0xf << 24)
+#define SDHCI_CTRL2_FLTCLKSEL_SHIFT	(24)
+#define SDHCI_CTRL2_FLTCLKSEL(_x)	((_x) << 24)
+
+#define SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
+#define SDHCI_CTRL2_LVLDAT_SHIFT	(16)
+#define SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
+
+#define SDHCI_CTRL2_ENFBCLKTX		(1 << 15)
+#define SDHCI_CTRL2_ENFBCLKRX		(1 << 14)
+#define SDHCI_CTRL2_SDCDSEL		(1 << 13)
+#define SDHCI_CTRL2_SDSIGPC		(1 << 12)
+#define SDHCI_CTRL2_ENBUSYCHKTXSTART	(1 << 11)
+
+#define SDHCI_CTRL2_DFCNT_MASK(_x)	((_x) << 9)
+#define SDHCI_CTRL2_DFCNT_SHIFT		(9)
+
+#define SDHCI_CTRL2_ENCLKOUTHOLD	(1 << 8)
+#define SDHCI_CTRL2_RWAITMODE		(1 << 7)
+#define SDHCI_CTRL2_DISBUFRD		(1 << 6)
+#define SDHCI_CTRL2_SELBASECLK_MASK(_x)	((_x) << 4)
+#define SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
+#define SDHCI_CTRL2_PWRSYNC		(1 << 3)
+#define SDHCI_CTRL2_ENCLKOUTMSKCON	(1 << 1)
+#define SDHCI_CTRL2_HWINITFIN		(1 << 0)
+
+#define SDHCI_CTRL3_FCSEL3		(1 << 31)
+#define SDHCI_CTRL3_FCSEL2		(1 << 23)
+#define SDHCI_CTRL3_FCSEL1		(1 << 15)
+#define SDHCI_CTRL3_FCSEL0		(1 << 7)
+
+#define SDHCI_CTRL4_DRIVE_MASK(_x)	((_x) << 16)
+#define SDHCI_CTRL4_DRIVE_SHIFT		(16)
+
+int s5p_sdhci_init(u32 regbase, int index, int bus_width);
+
+static inline int s5p_mmc_init(int index, int bus_width)
+{
+	unsigned int base = samsung_get_base_mmc() +
+				 (S5P_MMC_DEV_OFFSET * index);
+
+	return s5p_sdhci_init(base, index, bus_width);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/periph.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/periph.h
new file mode 100644
index 000000000..bb73d727f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/periph.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+	PERIPH_ID_UART0 = 51,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+	PERIPH_ID_UART3,
+	PERIPH_ID_I2C0 = 56,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_I2C4,
+	PERIPH_ID_I2C5,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_I2C7,
+	PERIPH_ID_SPI0 = 68,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SPI2,
+	PERIPH_ID_SDMMC0 = 75,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_I2C8 = 87,
+	PERIPH_ID_I2C9,
+	PERIPH_ID_I2S0 = 98,
+	PERIPH_ID_I2S1 = 99,
+
+	/* Since following peripherals do
+	 * not have shared peripheral interrupts (SPIs)
+	 * they are numbered arbitiraly after the maximum
+	 * SPIs Exynos has (128)
+	 */
+	PERIPH_ID_SROMC = 128,
+	PERIPH_ID_SPI3,
+	PERIPH_ID_SPI4,
+	PERIPH_ID_SDMMC4,
+	PERIPH_ID_PWM0,
+	PERIPH_ID_PWM1,
+	PERIPH_ID_PWM2,
+	PERIPH_ID_PWM3,
+	PERIPH_ID_PWM4,
+	PERIPH_ID_I2C10 = 203,
+
+	PERIPH_ID_NONE = -1,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/pinmux.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/pinmux.h
new file mode 100644
index 000000000..075cdce3c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/pinmux.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Abhilash Kesavan <a.kesavan@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_PINMUX_H
+#define __ASM_ARM_ARCH_PINMUX_H
+
+#include "periph.h"
+
+/*
+ * Flags for setting specific configarations of peripherals.
+ * List will grow with support for more devices getting added.
+ */
+enum {
+	PINMUX_FLAG_NONE	= 0x00000000,
+
+	/* Flags for eMMC */
+	PINMUX_FLAG_8BIT_MODE	= 1 << 0,       /* SDMMC 8-bit mode */
+
+	/* Flags for SROM controller */
+	PINMUX_FLAG_BANK	= 3 << 0,       /* bank number (0-3) */
+	PINMUX_FLAG_16BIT	= 1 << 2,       /* 16-bit width */
+};
+
+/**
+ * Configures the pinmux for a particular peripheral.
+ *
+ * Each gpio can be configured in many different ways (4 bits on exynos)
+ * such as "input", "output", "special function", "external interrupt"
+ * etc. This function will configure the peripheral pinmux along with
+ * pull-up/down and drive strength.
+ *
+ * @param peripheral	peripheral to be configured
+ * @param flags		configure flags
+ * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
+ */
+int exynos_pinmux_config(int peripheral, int flags);
+
+/**
+ * Decode the peripheral id using the interrpt numbers.
+ *
+ * @param blob  Device tree blob
+ * @param node  FDT I2C node to find
+ * @return peripheral id if ok, PERIPH_ID_NONE on error
+ */
+int pinmux_decode_periph_id(const void *blob, int node);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/power.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/power.h
new file mode 100644
index 000000000..e382e8e21
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/power.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_POWER_H_
+#define __ASM_ARM_ARCH_POWER_H_
+
+/*
+ * Power control
+ */
+#define S5PC100_OTHERS			0xE0108200
+#define S5PC100_RST_STAT		0xE0108300
+#define S5PC100_SLEEP_WAKEUP		(1 << 3)
+#define S5PC100_WAKEUP_STAT		0xE0108304
+#define S5PC100_INFORM0			0xE0108400
+
+#define S5PC110_RST_STAT		0xE010A000
+#define S5PC110_SLEEP_WAKEUP		(1 << 3)
+#define S5PC110_WAKEUP_STAT		0xE010C200
+#define S5PC110_OTHERS			0xE010E000
+#define S5PC110_USB_PHY_CON		0xE010E80C
+#define S5PC110_INFORM0			0xE010F000
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/pwm.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/pwm.h
new file mode 100644
index 000000000..1a531bedd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/pwm.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_PWM_H_
+#define __ASM_ARM_ARCH_PWM_H_
+
+#define PRESCALER_0		(8 - 1)		/* prescaler of timer 0, 1 */
+#define PRESCALER_1		(16 - 1)	/* prescaler of timer 2, 3, 4 */
+
+/* Divider MUX */
+#define MUX_DIV_1		0		/* 1/1 period */
+#define MUX_DIV_2		1		/* 1/2 period */
+#define MUX_DIV_4		2		/* 1/4 period */
+#define MUX_DIV_8		3		/* 1/8 period */
+#define MUX_DIV_16		4		/* 1/16 period */
+
+#define MUX_DIV_SHIFT(x)	(x * 4)
+
+#define TCON_OFFSET(x)		((x + 1) * (!!x) << 2)
+
+#define TCON_START(x)		(1 << TCON_OFFSET(x))
+#define TCON_UPDATE(x)		(1 << (TCON_OFFSET(x) + 1))
+#define TCON_INVERTER(x)	(1 << (TCON_OFFSET(x) + 2))
+#define TCON_AUTO_RELOAD(x)	(1 << (TCON_OFFSET(x) + 3))
+#define TCON4_AUTO_RELOAD	(1 << 22)
+
+#ifndef __ASSEMBLY__
+struct s5p_timer {
+	unsigned int	tcfg0;
+	unsigned int	tcfg1;
+	unsigned int	tcon;
+	unsigned int	tcntb0;
+	unsigned int	tcmpb0;
+	unsigned int	tcnto0;
+	unsigned int	tcntb1;
+	unsigned int	tcmpb1;
+	unsigned int	tcnto1;
+	unsigned int	tcntb2;
+	unsigned int	tcmpb2;
+	unsigned int	tcnto2;
+	unsigned int	tcntb3;
+	unsigned int	res1;
+	unsigned int	tcnto3;
+	unsigned int	tcntb4;
+	unsigned int	tcnto4;
+	unsigned int	tintcstat;
+};
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/sromc.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/sromc.h
new file mode 100644
index 000000000..45de4a799
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/sromc.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * Note: This file contains the register description for Memory subsystem
+ * 	 (SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX.
+ *
+ * 	 Only SROMC is defined as of now
+ */
+
+#ifndef __ASM_ARCH_SROMC_H_
+#define __ASM_ARCH_SROMC_H_
+
+#define SMC_DATA16_WIDTH(x)    (1<<((x*4)+0))
+#define SMC_BYTE_ADDR_MODE(x)  (1<<((x*4)+1))  /* 0-> Half-word base address*/
+						/* 1-> Byte base address*/
+#define SMC_WAIT_ENABLE(x)     (1<<((x*4)+2))
+#define SMC_BYTE_ENABLE(x)     (1<<((x*4)+3))
+
+#define SMC_BC_TACS(x) (x << 28) /* 0clk     address set-up */
+#define SMC_BC_TCOS(x) (x << 24) /* 4clk     chip selection set-up */
+#define SMC_BC_TACC(x) (x << 16) /* 14clk    access cycle */
+#define SMC_BC_TCOH(x) (x << 12) /* 1clk     chip selection hold */
+#define SMC_BC_TAH(x)  (x << 8)  /* 4clk     address holding time */
+#define SMC_BC_TACP(x) (x << 4)  /* 6clk     page mode access cycle */
+#define SMC_BC_PMC(x)  (x << 0)  /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s5p_sromc {
+	unsigned int	bw;
+	unsigned int	bc[6];
+};
+#endif	/* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
+
+#endif /* __ASM_ARCH_SMC_H_ */
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/sys_proto.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/sys_proto.h
new file mode 100644
index 000000000..89de40004
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/sys_proto.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2009 Samsung Electrnoics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+u32 get_device_type(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/uart.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/uart.h
new file mode 100644
index 000000000..6618981ca
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/uart.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_UART_H_
+#define __ASM_ARCH_UART_H_
+
+#ifndef __ASSEMBLY__
+/* baudrate rest value */
+union br_rest {
+	unsigned short	slot;		/* udivslot */
+	unsigned char	value;		/* ufracval */
+};
+
+struct s5p_uart {
+	unsigned int	ulcon;
+	unsigned int	ucon;
+	unsigned int	ufcon;
+	unsigned int	umcon;
+	unsigned int	utrstat;
+	unsigned int	uerstat;
+	unsigned int	ufstat;
+	unsigned int	umstat;
+	unsigned char	utxh;
+	unsigned char	res1[3];
+	unsigned char	urxh;
+	unsigned char	res2[3];
+	unsigned int	ubrdiv;
+	union br_rest	rest;
+	unsigned char	res3[0x3d0];
+};
+
+static inline int s5p_uart_divslot(void)
+{
+	return 1;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/watchdog.h b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/watchdog.h
new file mode 100644
index 000000000..81b8b0f23
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/include/mach/watchdog.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#ifndef __ASM_ARM_ARCH_WATCHDOG_H_
+#define __ASM_ARM_ARCH_WATCHDOG_H_
+
+#define WTCON_RESET_OFFSET	0
+#define WTCON_INTEN_OFFSET	2
+#define WTCON_CLKSEL_OFFSET	3
+#define WTCON_EN_OFFSET		5
+#define WTCON_PRE_OFFSET	8
+
+#define WTCON_CLK_16		0x0
+#define WTCON_CLK_32		0x1
+#define WTCON_CLK_64		0x2
+#define WTCON_CLK_128		0x3
+
+#define WTCON_CLK(x)		((x & 0x3) << WTCON_CLKSEL_OFFSET)
+#define WTCON_PRESCALER(x)	((x) << WTCON_PRE_OFFSET)
+#define WTCON_EN		(0x1 << WTCON_EN_OFFSET)
+#define WTCON_RESET		(0x1 << WTCON_RESET_OFFSET)
+#define WTCON_INT		(0x1 << WTCON_INTEN_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct s5p_watchdog {
+	unsigned int wtcon;
+	unsigned int wtdat;
+	unsigned int wtcnt;
+	unsigned int wtclrint;
+};
+
+/* functions */
+void wdt_stop(void);
+void wdt_start(unsigned int timeout);
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/pinmux.c b/roms/u-boot/arch/arm/mach-s5pc1xx/pinmux.c
new file mode 100644
index 000000000..818d75164
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/pinmux.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Dummy functions to keep s5p_goni building (although it won't work)
+ *
+ * Copyright 2018 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+
+int exynos_pinmux_config(int peripheral, int flags)
+{
+	return 0;
+}
+
+int pinmux_decode_periph_id(const void *blob, int node)
+{
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-s5pc1xx/reset.S b/roms/u-boot/arch/arm/mach-s5pc1xx/reset.S
new file mode 100644
index 000000000..aac1ea061
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-s5pc1xx/reset.S
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2009 Samsung Electronics.
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#include <asm/arch/cpu.h>
+#include <linux/linkage.h>
+
+#define S5PC100_SWRESET			0xE0200000
+#define S5PC110_SWRESET			0xE0102000
+
+ENTRY(reset_cpu)
+	ldr	r1, =S5PC100_PRO_ID
+	ldr	r2, [r1]
+	ldr	r4, =0x00010000
+	and	r4, r2, r4
+	cmp	r4, #0
+	bne	110f
+	/* S5PC100 */
+	ldr	r1, =S5PC100_SWRESET
+	ldr	r2, =0xC100
+	b	200f
+110:	/* S5PC110 */
+	ldr	r1, =S5PC110_SWRESET
+	mov	r2, #1
+200:
+	str	r2, [r1]
+_loop_forever:
+	b	_loop_forever
+ENDPROC(reset_cpu)
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/Kconfig b/roms/u-boot/arch/arm/mach-snapdragon/Kconfig
new file mode 100644
index 000000000..e562d693c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/Kconfig
@@ -0,0 +1,43 @@
+if ARCH_SNAPDRAGON
+
+config SYS_SOC
+	default "snapdragon"
+
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
+config SPL_SYS_MALLOC_F_LEN
+	default 0x2000
+
+choice
+	prompt "Snapdragon board select"
+
+config TARGET_DRAGONBOARD410C
+	bool "96Boards Dragonboard 410C"
+	select BOARD_LATE_INIT
+	help
+	  Support for 96Boards Dragonboard 410C. This board complies with
+	  96Board Open Platform Specifications. Features:
+	  - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
+	  - 1GiB RAM
+	  - 8GiB eMMC, uSD slot
+	  - WiFi, Bluetooth and GPS module
+	  - 2x Host, 1x Device USB port
+	  - HDMI
+	  - 20-pin low speed and 40-pin high speed expanders, 4 LED, 3 buttons
+
+config TARGET_DRAGONBOARD820C
+	bool "96Boards Dragonboard 820C"
+	help
+	  Support for 96Boards Dragonboard 820C. This board complies with
+	  96Board Open Platform Specifications. Features:
+	  - Qualcomm Snapdragon 820C SoC - APQ8096 (4xKyro CPU)
+	  - 3GiB RAM
+	  - 32GiB UFS drive
+
+endchoice
+
+source "board/qualcomm/dragonboard410c/Kconfig"
+source "board/qualcomm/dragonboard820c/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/Makefile b/roms/u-boot/arch/arm/mach-snapdragon/Makefile
new file mode 100644
index 000000000..709919fce
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+
+obj-$(CONFIG_TARGET_DRAGONBOARD820C) += clock-apq8096.o
+obj-$(CONFIG_TARGET_DRAGONBOARD820C) += sysmap-apq8096.o
+obj-$(CONFIG_TARGET_DRAGONBOARD410C) += clock-apq8016.o
+obj-$(CONFIG_TARGET_DRAGONBOARD410C) += sysmap-apq8016.o
+obj-y += misc.o
+obj-y += clock-snapdragon.o
+obj-y += dram.o
+obj-y += pinctrl-snapdragon.o
+obj-y += pinctrl-apq8016.o
+obj-y += pinctrl-apq8096.o
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/clock-apq8016.c b/roms/u-boot/arch/arm/mach-snapdragon/clock-apq8016.c
new file mode 100644
index 000000000..6e4a0ccb9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/clock-apq8016.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Clock drivers for Qualcomm APQ8016
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * Based on Little Kernel driver, simplified
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include "clock-snapdragon.h"
+
+/* GPLL0 clock control registers */
+#define GPLL0_STATUS_ACTIVE BIT(17)
+
+static const struct bcr_regs sdc_regs[] = {
+	{
+	.cfg_rcgr = SDCC_CFG_RCGR(1),
+	.cmd_rcgr = SDCC_CMD_RCGR(1),
+	.M = SDCC_M(1),
+	.N = SDCC_N(1),
+	.D = SDCC_D(1),
+	},
+	{
+	.cfg_rcgr = SDCC_CFG_RCGR(2),
+	.cmd_rcgr = SDCC_CMD_RCGR(2),
+	.M = SDCC_M(2),
+	.N = SDCC_N(2),
+	.D = SDCC_D(2),
+	}
+};
+
+static struct pll_vote_clk gpll0_vote_clk = {
+	.status = GPLL0_STATUS,
+	.status_bit = GPLL0_STATUS_ACTIVE,
+	.ena_vote = APCS_GPLL_ENA_VOTE,
+	.vote_bit = BIT(0),
+};
+
+static struct vote_clk gcc_blsp1_ahb_clk = {
+	.cbcr_reg = BLSP1_AHB_CBCR,
+	.ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE,
+	.vote_bit = BIT(10),
+};
+
+/* SDHCI */
+static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
+{
+	int div = 8; /* 100MHz default */
+
+	if (rate == 200000000)
+		div = 4;
+
+	clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot));
+	/* 800Mhz/div, gpll0 */
+	clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,
+			     CFG_CLK_SRC_GPLL0);
+	clk_enable_gpll0(priv->base, &gpll0_vote_clk);
+	clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
+
+	return rate;
+}
+
+static const struct bcr_regs uart2_regs = {
+	.cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR,
+	.cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR,
+	.M = BLSP1_UART2_APPS_M,
+	.N = BLSP1_UART2_APPS_N,
+	.D = BLSP1_UART2_APPS_D,
+};
+
+/* UART: 115200 */
+static int clk_init_uart(struct msm_clk_priv *priv)
+{
+	/* Enable AHB clock */
+	clk_enable_vote_clk(priv->base, &gcc_blsp1_ahb_clk);
+
+	/* 7372800 uart block clock @ GPLL0 */
+	clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,
+			     CFG_CLK_SRC_GPLL0);
+
+	/* Vote for gpll0 clock */
+	clk_enable_gpll0(priv->base, &gpll0_vote_clk);
+
+	/* Enable core clk */
+	clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
+
+	return 0;
+}
+
+ulong msm_set_rate(struct clk *clk, ulong rate)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {
+	case 0: /* SDC1 */
+		return clk_init_sdc(priv, 0, rate);
+		break;
+	case 1: /* SDC2 */
+		return clk_init_sdc(priv, 1, rate);
+		break;
+	case 4: /* UART2 */
+		return clk_init_uart(priv);
+		break;
+	default:
+		return 0;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/clock-apq8096.c b/roms/u-boot/arch/arm/mach-snapdragon/clock-apq8096.c
new file mode 100644
index 000000000..e5011be8f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/clock-apq8096.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Clock drivers for Qualcomm APQ8096
+ *
+ * (C) Copyright 2017 Jorge Ramirez Ortiz <jorge.ramirez-ortiz@linaro.org>
+ *
+ * Based on Little Kernel driver, simplified
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include "clock-snapdragon.h"
+
+/* GPLL0 clock control registers */
+#define GPLL0_STATUS_ACTIVE		BIT(30)
+#define APCS_GPLL_ENA_VOTE_GPLL0	BIT(0)
+
+static const struct bcr_regs sdc_regs = {
+	.cfg_rcgr = SDCC2_CFG_RCGR,
+	.cmd_rcgr = SDCC2_CMD_RCGR,
+	.M = SDCC2_M,
+	.N = SDCC2_N,
+	.D = SDCC2_D,
+};
+
+static const struct pll_vote_clk gpll0_vote_clk = {
+	.status = GPLL0_STATUS,
+	.status_bit = GPLL0_STATUS_ACTIVE,
+	.ena_vote = APCS_GPLL_ENA_VOTE,
+	.vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
+};
+
+static struct vote_clk gcc_blsp2_ahb_clk = {
+	.cbcr_reg = BLSP2_AHB_CBCR,
+	.ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE,
+	.vote_bit = BIT(15),
+};
+
+static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
+{
+	int div = 3;
+
+	clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
+	clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
+			     CFG_CLK_SRC_GPLL0);
+	clk_enable_gpll0(priv->base, &gpll0_vote_clk);
+	clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
+
+	return rate;
+}
+
+static const struct bcr_regs uart2_regs = {
+	.cfg_rcgr = BLSP2_UART2_APPS_CFG_RCGR,
+	.cmd_rcgr = BLSP2_UART2_APPS_CMD_RCGR,
+	.M = BLSP2_UART2_APPS_M,
+	.N = BLSP2_UART2_APPS_N,
+	.D = BLSP2_UART2_APPS_D,
+};
+
+static int clk_init_uart(struct msm_clk_priv *priv)
+{
+	/* Enable AHB clock */
+	clk_enable_vote_clk(priv->base, &gcc_blsp2_ahb_clk);
+
+	/* 7372800 uart block clock @ GPLL0 */
+	clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625,
+			     CFG_CLK_SRC_GPLL0);
+
+	/* Vote for gpll0 clock */
+	clk_enable_gpll0(priv->base, &gpll0_vote_clk);
+
+	/* Enable core clk */
+	clk_enable_cbc(priv->base + BLSP2_UART2_APPS_CBCR);
+
+	return 0;
+}
+
+ulong msm_set_rate(struct clk *clk, ulong rate)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {
+	case 0: /* SDC1 */
+		return clk_init_sdc(priv, rate);
+		break;
+	case 4: /*UART2*/
+		return clk_init_uart(priv);
+	default:
+		return 0;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/clock-snapdragon.c b/roms/u-boot/arch/arm/mach-snapdragon/clock-snapdragon.c
new file mode 100644
index 000000000..fbe0b5212
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/clock-snapdragon.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Clock drivers for Qualcomm APQ8016, APQ8096
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * Based on Little Kernel driver, simplified
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include "clock-snapdragon.h"
+
+/* CBCR register fields */
+#define CBCR_BRANCH_ENABLE_BIT  BIT(0)
+#define CBCR_BRANCH_OFF_BIT     BIT(31)
+
+extern ulong msm_set_rate(struct clk *clk, ulong rate);
+
+/* Enable clock controlled by CBC soft macro */
+void clk_enable_cbc(phys_addr_t cbcr)
+{
+	setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT);
+
+	while (readl(cbcr) & CBCR_BRANCH_OFF_BIT)
+		;
+}
+
+void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0)
+{
+	if (readl(base + gpll0->status) & gpll0->status_bit)
+		return; /* clock already enabled */
+
+	setbits_le32(base + gpll0->ena_vote, gpll0->vote_bit);
+
+	while ((readl(base + gpll0->status) & gpll0->status_bit) == 0)
+		;
+}
+
+#define BRANCH_ON_VAL (0)
+#define BRANCH_NOC_FSM_ON_VAL BIT(29)
+#define BRANCH_CHECK_MASK GENMASK(31, 28)
+
+void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk)
+{
+	u32 val;
+
+	setbits_le32(base + vclk->ena_vote, vclk->vote_bit);
+	do {
+		val = readl(base + vclk->cbcr_reg);
+		val &= BRANCH_CHECK_MASK;
+	} while ((val != BRANCH_ON_VAL) && (val != BRANCH_NOC_FSM_ON_VAL));
+}
+
+#define APPS_CMD_RGCR_UPDATE BIT(0)
+
+/* Update clock command via CMD_RGCR */
+void clk_bcr_update(phys_addr_t apps_cmd_rgcr)
+{
+	setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE);
+
+	/* Wait for frequency to be updated. */
+	while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE)
+		;
+}
+
+#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
+
+#define CFG_MASK 0x3FFF
+
+#define CFG_DIVIDER_MASK 0x1F
+
+/* root set rate for clocks with half integer and MND divider */
+void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
+			  int div, int m, int n, int source)
+{
+	u32 cfg;
+	/* M value for MND divider. */
+	u32 m_val = m;
+	/* NOT(N-M) value for MND divider. */
+	u32 n_val = ~((n) - (m)) * !!(n);
+	/* NOT 2D value for MND divider. */
+	u32 d_val = ~(n);
+
+	/* Program MND values */
+	writel(m_val, base + regs->M);
+	writel(n_val, base + regs->N);
+	writel(d_val, base + regs->D);
+
+	/* setup src select and divider */
+	cfg  = readl(base + regs->cfg_rcgr);
+	cfg &= ~CFG_MASK;
+	cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
+
+	/* Set the divider; HW permits fraction dividers (+0.5), but
+	   for simplicity, we will support integers only */
+	if (div)
+		cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
+
+	if (n_val)
+		cfg |= CFG_MODE_DUAL_EDGE;
+
+	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
+
+	/* Inform h/w to start using the new config. */
+	clk_bcr_update(base + regs->cmd_rcgr);
+}
+
+static int msm_clk_probe(struct udevice *dev)
+{
+	struct msm_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static ulong msm_clk_set_rate(struct clk *clk, ulong rate)
+{
+	return msm_set_rate(clk, rate);
+}
+
+static struct clk_ops msm_clk_ops = {
+	.set_rate = msm_clk_set_rate,
+};
+
+static const struct udevice_id msm_clk_ids[] = {
+	{ .compatible = "qcom,gcc-msm8916" },
+	{ .compatible = "qcom,gcc-apq8016" },
+	{ .compatible = "qcom,gcc-msm8996" },
+	{ .compatible = "qcom,gcc-apq8096" },
+	{ }
+};
+
+U_BOOT_DRIVER(clk_msm) = {
+	.name		= "clk_msm",
+	.id		= UCLASS_CLK,
+	.of_match	= msm_clk_ids,
+	.ops		= &msm_clk_ops,
+	.priv_auto	= sizeof(struct msm_clk_priv),
+	.probe		= msm_clk_probe,
+};
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/clock-snapdragon.h b/roms/u-boot/arch/arm/mach-snapdragon/clock-snapdragon.h
new file mode 100644
index 000000000..58fab40a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/clock-snapdragon.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Qualcomm APQ8016, APQ8096
+ *
+ * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ */
+#ifndef _CLOCK_SNAPDRAGON_H
+#define _CLOCK_SNAPDRAGON_H
+
+#define CFG_CLK_SRC_CXO   (0 << 8)
+#define CFG_CLK_SRC_GPLL0 (1 << 8)
+#define CFG_CLK_SRC_MASK  (7 << 8)
+
+struct pll_vote_clk {
+	uintptr_t status;
+	int status_bit;
+	uintptr_t ena_vote;
+	int vote_bit;
+};
+
+struct vote_clk {
+	uintptr_t cbcr_reg;
+	uintptr_t ena_vote;
+	int vote_bit;
+};
+struct bcr_regs {
+	uintptr_t cfg_rcgr;
+	uintptr_t cmd_rcgr;
+	uintptr_t M;
+	uintptr_t N;
+	uintptr_t D;
+};
+
+struct msm_clk_priv {
+	phys_addr_t base;
+};
+
+void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0);
+void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
+void clk_enable_cbc(phys_addr_t cbcr);
+void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk);
+void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
+			  int div, int m, int n, int source);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/dram.c b/roms/u-boot/arch/arm/mach-snapdragon/dram.c
new file mode 100644
index 000000000..2a161be13
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/dram.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Onboard memory detection for Snapdragon boards
+ *
+ * (C) Copyright 2018 Ramon Fried <ramon.fried@gmail.com>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <part.h>
+#include <smem.h>
+#include <fdt_support.h>
+#include <asm/arch/dram.h>
+
+#define SMEM_USABLE_RAM_PARTITION_TABLE 402
+#define RAM_PART_NAME_LENGTH            16
+#define RAM_NUM_PART_ENTRIES            32
+#define CATEGORY_SDRAM 0x0E
+#define TYPE_SYSMEM 0x01
+
+struct smem_ram_ptable_hdr {
+	u32 magic[2];
+	u32 version;
+	u32 reserved;
+	u32 len;
+} __attribute__ ((__packed__));
+
+struct smem_ram_ptn {
+	char name[RAM_PART_NAME_LENGTH];
+	u64 start;
+	u64 size;
+	u32 attr;
+	u32 category;
+	u32 domain;
+	u32 type;
+	u32 num_partitions;
+	u32 reserved[3];
+} __attribute__ ((__packed__));
+
+struct smem_ram_ptable {
+	struct smem_ram_ptable_hdr hdr;
+	u32 reserved;     /* Added for 8 bytes alignment of header */
+	struct smem_ram_ptn parts[RAM_NUM_PART_ENTRIES];
+} __attribute__ ((__packed__));
+
+#ifndef MEMORY_BANKS_MAX
+#define MEMORY_BANKS_MAX 4
+#endif
+
+int msm_fixup_memory(void *blob)
+{
+	u64 bank_start[MEMORY_BANKS_MAX];
+	u64 bank_size[MEMORY_BANKS_MAX];
+	size_t size;
+	int i;
+	int count = 0;
+	struct udevice *smem;
+	int ret;
+	struct smem_ram_ptable *ram_ptable;
+	struct smem_ram_ptn *p;
+
+	ret = uclass_get_device_by_name(UCLASS_SMEM, "smem", &smem);
+	if (ret < 0) {
+		printf("Failed to find SMEM node. Check device tree\n");
+		return 0;
+	}
+
+	ram_ptable = smem_get(smem, -1, SMEM_USABLE_RAM_PARTITION_TABLE, &size);
+
+	if (!ram_ptable) {
+		printf("Failed to find SMEM partition.\n");
+		return -ENODEV;
+	}
+
+	/* Check validy of RAM */
+	for (i = 0; i < RAM_NUM_PART_ENTRIES; i++) {
+		p = &ram_ptable->parts[i];
+		if (p->category == CATEGORY_SDRAM && p->type == TYPE_SYSMEM) {
+			bank_start[count] = p->start;
+			bank_size[count] = p->size;
+			debug("Detected memory bank %u: start: 0x%llx size: 0x%llx\n",
+					count, p->start, p->size);
+			count++;
+		}
+	}
+
+	if (!count) {
+		printf("Failed to detect any memory bank\n");
+		return -ENODEV;
+	}
+
+	ret = fdt_fixup_memory_banks(blob, bank_start, bank_size, count);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/include/mach/dram.h b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/dram.h
new file mode 100644
index 000000000..0a9eedda4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/dram.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Snapdragon DRAM
+ * Copyright (C) 2018 Ramon Fried <ramon.fried@gmail.com>
+ */
+
+#ifndef DRAM_H
+#define DRAM_H
+
+int msm_fixup_memory(void *blob);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/gpio.h
new file mode 100644
index 000000000..bbc2bc161
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/gpio.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Empty gpio.h
+ *
+ * This file must stay as arch/arm/include/asm/gpio.h requires it.
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ */
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/include/mach/misc.h b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/misc.h
new file mode 100644
index 000000000..c60e3e472
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/misc.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Snapdragon DRAM
+ * Copyright (C) 2018 Ramon Fried <ramon.fried@gmail.com>
+ */
+
+#ifndef MISC_H
+#define MISC_H
+
+u32 msm_board_serial(void);
+void msm_generate_mac_addr(u8 *mac);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
new file mode 100644
index 000000000..520e2e6bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Qualcomm APQ8916 sysmap
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ */
+#ifndef _MACH_SYSMAP_APQ8016_H
+#define _MACH_SYSMAP_APQ8016_H
+
+#define GICD_BASE			(0x0b000000)
+#define GICC_BASE			(0x0a20c000)
+
+/* Clocks: (from CLK_CTL_BASE)  */
+#define GPLL0_STATUS			(0x2101C)
+#define APCS_GPLL_ENA_VOTE		(0x45000)
+#define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004)
+
+#define SDCC_BCR(n)			((n * 0x1000) + 0x41000)
+#define SDCC_CMD_RCGR(n)		((n * 0x1000) + 0x41004)
+#define SDCC_CFG_RCGR(n)		((n * 0x1000) + 0x41008)
+#define SDCC_M(n)			((n * 0x1000) + 0x4100C)
+#define SDCC_N(n)			((n * 0x1000) + 0x41010)
+#define SDCC_D(n)			((n * 0x1000) + 0x41014)
+#define SDCC_APPS_CBCR(n)		((n * 0x1000) + 0x41018)
+#define SDCC_AHB_CBCR(n)		((n * 0x1000) + 0x4101C)
+
+/* BLSP1 AHB clock (root clock for BLSP) */
+#define BLSP1_AHB_CBCR			0x1008
+
+/* Uart clock control registers */
+#define BLSP1_UART2_BCR			(0x3028)
+#define BLSP1_UART2_APPS_CBCR		(0x302C)
+#define BLSP1_UART2_APPS_CMD_RCGR	(0x3034)
+#define BLSP1_UART2_APPS_CFG_RCGR	(0x3038)
+#define BLSP1_UART2_APPS_M		(0x303C)
+#define BLSP1_UART2_APPS_N		(0x3040)
+#define BLSP1_UART2_APPS_D		(0x3044)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h
new file mode 100644
index 000000000..36a902bd9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Qualcomm APQ8096 sysmap
+ *
+ * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ */
+#ifndef _MACH_SYSMAP_APQ8096_H
+#define _MACH_SYSMAP_APQ8096_H
+
+#define TLMM_BASE_ADDR			(0x1010000)
+
+/* Strength (sdc1) */
+#define SDC1_HDRV_PULL_CTL_REG		(TLMM_BASE_ADDR + 0x0012D000)
+
+/* Clocks: (from CLK_CTL_BASE)  */
+#define GPLL0_STATUS			(0x0000)
+#define APCS_GPLL_ENA_VOTE		(0x52000)
+#define APCS_CLOCK_BRANCH_ENA_VOTE	(0x52004)
+
+#define SDCC2_BCR			(0x14000) /* block reset */
+#define SDCC2_APPS_CBCR			(0x14004) /* branch control */
+#define SDCC2_AHB_CBCR			(0x14008)
+#define SDCC2_CMD_RCGR			(0x14010)
+#define SDCC2_CFG_RCGR			(0x14014)
+#define SDCC2_M				(0x14018)
+#define SDCC2_N				(0x1401C)
+#define SDCC2_D				(0x14020)
+
+#define BLSP2_AHB_CBCR			(0x25004)
+#define BLSP2_UART2_APPS_CBCR		(0x29004)
+#define BLSP2_UART2_APPS_CMD_RCGR	(0x2900C)
+#define BLSP2_UART2_APPS_CFG_RCGR	(0x29010)
+#define BLSP2_UART2_APPS_M		(0x29014)
+#define BLSP2_UART2_APPS_N		(0x29018)
+#define BLSP2_UART2_APPS_D		(0x2901C)
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/misc.c b/roms/u-boot/arch/arm/mach-snapdragon/misc.c
new file mode 100644
index 000000000..aaa561c2c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/misc.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Miscellaneous Snapdragon functionality
+ *
+ * (C) Copyright 2018 Ramon Fried <ramon.fried@gmail.com>
+ *
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/arch/misc.h>
+
+/* UNSTUFF_BITS macro taken from Linux Kernel: drivers/mmc/core/sd.c */
+#define UNSTUFF_BITS(resp, start, size) \
+	({ \
+		const int __size = size; \
+		const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1;	\
+		const int __off = 3 - ((start) / 32); \
+		const int __shft = (start) & 31; \
+		u32 __res; \
+					\
+		__res = resp[__off] >> __shft; \
+		if (__size + __shft > 32) \
+			__res |= resp[__off - 1] << ((32 - __shft) % 32); \
+		__res & __mask;	\
+	})
+
+u32 msm_board_serial(void)
+{
+	struct mmc *mmc_dev;
+
+	mmc_dev = find_mmc_device(0);
+	if (!mmc_dev)
+		return 0;
+
+	return UNSTUFF_BITS(mmc_dev->cid, 16, 32);
+}
+
+void msm_generate_mac_addr(u8 *mac)
+{
+	int i;
+	char sn[9];
+
+	snprintf(sn, 9, "%08x", msm_board_serial());
+
+	/* fill in the mac with serialno, use locally adminstrated pool */
+	mac[0] = 0x02;
+	mac[1] = 00;
+	for (i = 3; i >= 0; i--) {
+		mac[i + 2] = simple_strtoul(&sn[2 * i], NULL, 16);
+		sn[2 * i] = 0;
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-apq8016.c b/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-apq8016.c
new file mode 100644
index 000000000..1042b564c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-apq8016.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm APQ8016 pinctrl
+ *
+ * (C) Copyright 2018 Ramon Fried <ramon.fried@gmail.com>
+ *
+ */
+
+#include "pinctrl-snapdragon.h"
+#include <common.h>
+
+#define MAX_PIN_NAME_LEN 32
+static char pin_name[MAX_PIN_NAME_LEN];
+static const char * const msm_pinctrl_pins[] = {
+	"SDC1_CLK",
+	"SDC1_CMD",
+	"SDC1_DATA",
+	"SDC2_CLK",
+	"SDC2_CMD",
+	"SDC2_DATA",
+	"QDSD_CLK",
+	"QDSD_CMD",
+	"QDSD_DATA0",
+	"QDSD_DATA1",
+	"QDSD_DATA2",
+	"QDSD_DATA3",
+};
+
+static const struct pinctrl_function msm_pinctrl_functions[] = {
+	{"blsp1_uart", 2},
+};
+
+static const char *apq8016_get_function_name(struct udevice *dev,
+					     unsigned int selector)
+{
+	return msm_pinctrl_functions[selector].name;
+}
+
+static const char *apq8016_get_pin_name(struct udevice *dev,
+					unsigned int selector)
+{
+	if (selector < 122) {
+		snprintf(pin_name, MAX_PIN_NAME_LEN, "GPIO_%u", selector);
+		return pin_name;
+	} else {
+		return msm_pinctrl_pins[selector - 122];
+	}
+}
+
+static unsigned int apq8016_get_function_mux(unsigned int selector)
+{
+	return msm_pinctrl_functions[selector].val;
+}
+
+struct msm_pinctrl_data apq8016_data = {
+	.pin_count = 133,
+	.functions_count = ARRAY_SIZE(msm_pinctrl_functions),
+	.get_function_name = apq8016_get_function_name,
+	.get_function_mux = apq8016_get_function_mux,
+	.get_pin_name = apq8016_get_pin_name,
+};
+
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-apq8096.c b/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-apq8096.c
new file mode 100644
index 000000000..20a71c319
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-apq8096.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm APQ8096 pinctrl
+ *
+ * (C) Copyright 2019 Ramon Fried <ramon.fried@gmail.com>
+ *
+ */
+
+#include "pinctrl-snapdragon.h"
+#include <common.h>
+
+#define MAX_PIN_NAME_LEN 32
+static char pin_name[MAX_PIN_NAME_LEN];
+static const char * const msm_pinctrl_pins[] = {
+	"SDC1_CLK",
+	"SDC1_CMD",
+	"SDC1_DATA",
+	"SDC2_CLK",
+	"SDC2_CMD",
+	"SDC2_DATA",
+	"SDC1_RCLK",
+};
+
+static const struct pinctrl_function msm_pinctrl_functions[] = {
+	{"blsp_uart8", 2},
+};
+
+static const char *apq8096_get_function_name(struct udevice *dev,
+					     unsigned int selector)
+{
+	return msm_pinctrl_functions[selector].name;
+}
+
+static const char *apq8096_get_pin_name(struct udevice *dev,
+					unsigned int selector)
+{
+	if (selector < 150) {
+		snprintf(pin_name, MAX_PIN_NAME_LEN, "GPIO_%u", selector);
+		return pin_name;
+	} else {
+		return msm_pinctrl_pins[selector - 150];
+	}
+}
+
+static unsigned int apq8096_get_function_mux(unsigned int selector)
+{
+	return msm_pinctrl_functions[selector].val;
+}
+
+struct msm_pinctrl_data apq8096_data = {
+	.pin_count = 157,
+	.functions_count = ARRAY_SIZE(msm_pinctrl_functions),
+	.get_function_name = apq8096_get_function_name,
+	.get_function_mux = apq8096_get_function_mux,
+	.get_pin_name = apq8096_get_pin_name,
+};
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-snapdragon.c b/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-snapdragon.c
new file mode 100644
index 000000000..e6b87c357
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-snapdragon.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TLMM driver for Qualcomm APQ8016, APQ8096
+ *
+ * (C) Copyright 2018 Ramon Fried <ramon.fried@gmail.com>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <dm/pinctrl.h>
+#include <linux/bitops.h>
+#include "pinctrl-snapdragon.h"
+
+struct msm_pinctrl_priv {
+	phys_addr_t base;
+	struct msm_pinctrl_data *data;
+};
+
+#define GPIO_CONFIG_OFFSET(x)         ((x) * 0x1000)
+#define TLMM_GPIO_PULL_MASK GENMASK(1, 0)
+#define TLMM_FUNC_SEL_MASK GENMASK(5, 2)
+#define TLMM_DRV_STRENGTH_MASK GENMASK(8, 6)
+#define TLMM_GPIO_DISABLE BIT(9)
+
+static const struct pinconf_param msm_conf_params[] = {
+	{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 3 },
+	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
+};
+
+static int msm_get_functions_count(struct udevice *dev)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	return priv->data->functions_count;
+}
+
+static int msm_get_pins_count(struct udevice *dev)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	return priv->data->pin_count;
+}
+
+static const char *msm_get_function_name(struct udevice *dev,
+					 unsigned int selector)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	return priv->data->get_function_name(dev, selector);
+}
+
+static int msm_pinctrl_probe(struct udevice *dev)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr(dev);
+	priv->data = (struct msm_pinctrl_data *)dev->driver_data;
+
+	return priv->base == FDT_ADDR_T_NONE ? -EINVAL : 0;
+}
+
+static const char *msm_get_pin_name(struct udevice *dev, unsigned int selector)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	return priv->data->get_pin_name(dev, selector);
+}
+
+static int msm_pinmux_set(struct udevice *dev, unsigned int pin_selector,
+			  unsigned int func_selector)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	clrsetbits_le32(priv->base + GPIO_CONFIG_OFFSET(pin_selector),
+			TLMM_FUNC_SEL_MASK | TLMM_GPIO_DISABLE,
+			priv->data->get_function_mux(func_selector) << 2);
+	return 0;
+}
+
+static int msm_pinconf_set(struct udevice *dev, unsigned int pin_selector,
+			   unsigned int param, unsigned int argument)
+{
+	struct msm_pinctrl_priv *priv = dev_get_priv(dev);
+
+	switch (param) {
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		clrsetbits_le32(priv->base + GPIO_CONFIG_OFFSET(pin_selector),
+				TLMM_DRV_STRENGTH_MASK, argument << 6);
+		break;
+	case PIN_CONFIG_BIAS_DISABLE:
+		clrbits_le32(priv->base + GPIO_CONFIG_OFFSET(pin_selector),
+			     TLMM_GPIO_PULL_MASK);
+		break;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+static struct pinctrl_ops msm_pinctrl_ops = {
+	.get_pins_count = msm_get_pins_count,
+	.get_pin_name = msm_get_pin_name,
+	.set_state = pinctrl_generic_set_state,
+	.pinmux_set = msm_pinmux_set,
+	.pinconf_num_params = ARRAY_SIZE(msm_conf_params),
+	.pinconf_params = msm_conf_params,
+	.pinconf_set = msm_pinconf_set,
+	.get_functions_count = msm_get_functions_count,
+	.get_function_name = msm_get_function_name,
+};
+
+static const struct udevice_id msm_pinctrl_ids[] = {
+	{ .compatible = "qcom,tlmm-apq8016", .data = (ulong)&apq8016_data },
+	{ .compatible = "qcom,tlmm-apq8096", .data = (ulong)&apq8096_data },
+	{ }
+};
+
+U_BOOT_DRIVER(pinctrl_snapdraon) = {
+	.name		= "pinctrl_msm",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= msm_pinctrl_ids,
+	.priv_auto	= sizeof(struct msm_pinctrl_priv),
+	.ops		= &msm_pinctrl_ops,
+	.probe		= msm_pinctrl_probe,
+};
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-snapdragon.h b/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-snapdragon.h
new file mode 100644
index 000000000..61d466f4d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/pinctrl-snapdragon.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Qualcomm Pin control
+ *
+ * (C) Copyright 2018 Ramon Fried <ramon.fried@gmail.com>
+ *
+ */
+#ifndef _PINCTRL_SNAPDRAGON_H
+#define _PINCTRL_SNAPDRAGON_H
+
+struct udevice;
+
+struct msm_pinctrl_data {
+	int pin_count;
+	int functions_count;
+	const char *(*get_function_name)(struct udevice *dev,
+					 unsigned int selector);
+	unsigned int (*get_function_mux)(unsigned int selector);
+	const char *(*get_pin_name)(struct udevice *dev,
+				    unsigned int selector);
+};
+
+struct pinctrl_function {
+	const char *name;
+	int val;
+};
+
+extern struct msm_pinctrl_data apq8016_data;
+extern struct msm_pinctrl_data apq8096_data;
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/sysmap-apq8016.c b/roms/u-boot/arch/arm/mach-snapdragon/sysmap-apq8016.c
new file mode 100644
index 000000000..ffa3f9aa3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/sysmap-apq8016.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm APQ8016 memory map
+ *
+ * (C) Copyright 2016 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+static struct mm_region apq8016_mem_map[] = {
+	{
+		.virt = 0x0UL, /* Peripheral block */
+		.phys = 0x0UL, /* Peripheral block */
+		.size = 0x8000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x80000000UL, /* DDR */
+		.phys = 0x80000000UL, /* DDR */
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = apq8016_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-snapdragon/sysmap-apq8096.c b/roms/u-boot/arch/arm/mach-snapdragon/sysmap-apq8096.c
new file mode 100644
index 000000000..0614f8308
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-snapdragon/sysmap-apq8096.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm APQ8096 memory map
+ *
+ * (C) Copyright 2017 Jorge Ramirez Ortiz <jorge.ramirez-ortiz@linaro.org>
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+static struct mm_region apq8096_mem_map[] = {
+	{
+		.virt = 0x0UL, /* Peripheral block */
+		.phys = 0x0UL, /* Peripheral block */
+		.size = 0x10000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x80000000UL, /* DDR */
+		.phys = 0x80000000UL, /* DDR */
+		.size = 0xC0000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = apq8096_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-socfpga/Kconfig b/roms/u-boot/arch/arm/mach-socfpga/Kconfig
new file mode 100644
index 000000000..0c3540623
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/Kconfig
@@ -0,0 +1,234 @@
+if ARCH_SOCFPGA
+
+config ERR_PTR_OFFSET
+	default 0xfffec000 if TARGET_SOCFPGA_GEN5 # Boot ROM range
+
+config NR_DRAM_BANKS
+	default 1
+
+config SOCFPGA_SECURE_VAB_AUTH
+	bool "Enable boot image authentication with Secure Device Manager"
+	depends on TARGET_SOCFPGA_AGILEX
+	select FIT_IMAGE_POST_PROCESS
+	select SHA384
+	select SHA512_ALGO
+	select SPL_FIT_IMAGE_POST_PROCESS
+	help
+	 All images loaded from FIT will be authenticated by Secure Device
+	 Manager.
+
+config SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE
+	bool "Allow non-FIT VAB signed images"
+	depends on SOCFPGA_SECURE_VAB_AUTH
+
+config SPL_SIZE_LIMIT
+	default 0x10000 if TARGET_SOCFPGA_GEN5
+
+config SPL_SIZE_LIMIT_PROVIDE_STACK
+	default 0x200 if TARGET_SOCFPGA_GEN5
+
+config SPL_STACK_R_ADDR
+	default 0x00800000 if TARGET_SOCFPGA_GEN5
+
+config SPL_SYS_MALLOC_F_LEN
+	default 0x800 if TARGET_SOCFPGA_GEN5
+
+config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
+	default 0xa2
+
+config SYS_MALLOC_F_LEN
+	default 0x2000 if TARGET_SOCFPGA_ARRIA10
+	default 0x2000 if TARGET_SOCFPGA_GEN5
+
+config SYS_TEXT_BASE
+	default 0x01000040 if TARGET_SOCFPGA_ARRIA10
+	default 0x01000040 if TARGET_SOCFPGA_GEN5
+
+config TARGET_SOCFPGA_AGILEX
+	bool
+	select ARMV8_MULTIENTRY
+	select ARMV8_SET_SMPEN
+	select BINMAN if SPL_ATF
+	select CLK
+	select FPGA_INTEL_SDM_MAILBOX
+	select NCORE_CACHE
+	select SPL_CLK if SPL
+	select TARGET_SOCFPGA_SOC64
+
+config TARGET_SOCFPGA_ARRIA5
+	bool
+	select TARGET_SOCFPGA_GEN5
+
+config TARGET_SOCFPGA_ARRIA10
+	bool
+	select SPL_ALTERA_SDRAM
+	select SPL_BOARD_INIT if SPL
+	select SPL_CACHE if SPL
+	select CLK
+	select SPL_CLK if SPL
+	select DM_I2C
+	select DM_RESET
+	select SPL_DM_RESET if SPL
+	select REGMAP
+	select SPL_REGMAP if SPL
+	select SYSCON
+	select SPL_SYSCON if SPL
+	select ETH_DESIGNWARE_SOCFPGA
+	imply FPGA_SOCFPGA
+	imply SPL_USE_TINY_PRINTF
+
+config TARGET_SOCFPGA_CYCLONE5
+	bool
+	select TARGET_SOCFPGA_GEN5
+
+config TARGET_SOCFPGA_GEN5
+	bool
+	select SPL_ALTERA_SDRAM
+	imply FPGA_SOCFPGA
+	imply SPL_SIZE_LIMIT_SUBTRACT_GD
+	imply SPL_SIZE_LIMIT_SUBTRACT_MALLOC
+	imply SPL_STACK_R
+	imply SPL_SYS_MALLOC_SIMPLE
+	imply SPL_USE_TINY_PRINTF
+
+config TARGET_SOCFPGA_SOC64
+	bool
+
+config TARGET_SOCFPGA_STRATIX10
+	bool
+	select ARMV8_MULTIENTRY
+	select ARMV8_SET_SMPEN
+	select BINMAN if SPL_ATF
+	select FPGA_INTEL_SDM_MAILBOX
+	select TARGET_SOCFPGA_SOC64
+
+choice
+	prompt "Altera SOCFPGA board select"
+	optional
+
+config TARGET_SOCFPGA_AGILEX_SOCDK
+	bool "Intel SOCFPGA SoCDK (Agilex)"
+	select TARGET_SOCFPGA_AGILEX
+
+config TARGET_SOCFPGA_ARIES_MCVEVK
+	bool "Aries MCVEVK (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_ARRIA10_SOCDK
+	bool "Altera SOCFPGA SoCDK (Arria 10)"
+	select TARGET_SOCFPGA_ARRIA10
+
+config TARGET_SOCFPGA_ARRIA5_SECU1
+	bool "ABB SECU1 (Arria V)"
+	select TARGET_SOCFPGA_ARRIA5
+	select VENDOR_KM
+
+config TARGET_SOCFPGA_ARRIA5_SOCDK
+	bool "Altera SOCFPGA SoCDK (Arria V)"
+	select TARGET_SOCFPGA_ARRIA5
+
+config TARGET_SOCFPGA_CYCLONE5_SOCDK
+	bool "Altera SOCFPGA SoCDK (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
+	bool "Devboards DBM-SoC1 (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_EBV_SOCRATES
+	bool "EBV SoCrates (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_IS1
+	bool "IS1 (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_SOFTING_VINING_FPGA
+	bool "Softing VIN|ING FPGA (Cyclone V)"
+	select BOARD_LATE_INIT
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_SR1500
+	bool "SR1500 (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_STRATIX10_SOCDK
+	bool "Intel SOCFPGA SoCDK (Stratix 10)"
+	select TARGET_SOCFPGA_STRATIX10
+
+config TARGET_SOCFPGA_TERASIC_DE0_NANO
+	bool "Terasic DE0-Nano-Atlas (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_TERASIC_DE10_NANO
+	bool "Terasic DE10-Nano (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_TERASIC_DE1_SOC
+	bool "Terasic DE1-SoC (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+config TARGET_SOCFPGA_TERASIC_SOCKIT
+	bool "Terasic SoCkit (Cyclone V)"
+	select TARGET_SOCFPGA_CYCLONE5
+
+endchoice
+
+config SYS_BOARD
+	default "agilex-socdk" if TARGET_SOCFPGA_AGILEX_SOCDK
+	default "arria5-socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "arria10-socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
+	default "cyclone5-socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
+	default "dbm-soc1" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
+	default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
+	default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
+	default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
+	default "is1" if TARGET_SOCFPGA_IS1
+	default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
+	default "secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
+	default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
+	default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES
+	default "sr1500" if TARGET_SOCFPGA_SR1500
+	default "stratix10-socdk" if TARGET_SOCFPGA_STRATIX10_SOCDK
+	default "vining_fpga" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
+
+config SYS_VENDOR
+	default "intel" if TARGET_SOCFPGA_AGILEX_SOCDK
+	default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "altera" if TARGET_SOCFPGA_ARRIA10_SOCDK
+	default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK
+	default "altera" if TARGET_SOCFPGA_STRATIX10_SOCDK
+	default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
+	default "devboards" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
+	default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
+	default "keymile" if TARGET_SOCFPGA_ARRIA5_SECU1
+	default "softing" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
+	default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO
+	default "terasic" if TARGET_SOCFPGA_TERASIC_DE1_SOC
+	default "terasic" if TARGET_SOCFPGA_TERASIC_DE10_NANO
+	default "terasic" if TARGET_SOCFPGA_TERASIC_SOCKIT
+
+config SYS_SOC
+	default "socfpga"
+
+config SYS_CONFIG_NAME
+	default "socfpga_agilex_socdk" if TARGET_SOCFPGA_AGILEX_SOCDK
+	default "socfpga_arria5_secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
+	default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "socfpga_arria10_socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
+	default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
+	default "socfpga_dbm_soc1" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
+	default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
+	default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
+	default "socfpga_de10_nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
+	default "socfpga_is1" if TARGET_SOCFPGA_IS1
+	default "socfpga_mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
+	default "socfpga_sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
+	default "socfpga_socrates" if TARGET_SOCFPGA_EBV_SOCRATES
+	default "socfpga_sr1500" if TARGET_SOCFPGA_SR1500
+	default "socfpga_stratix10_socdk" if TARGET_SOCFPGA_STRATIX10_SOCDK
+	default "socfpga_vining_fpga" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
+
+source "board/keymile/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-socfpga/Makefile b/roms/u-boot/arch/arm/mach-socfpga/Makefile
new file mode 100644
index 000000000..5779c5562
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/Makefile
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+# Copyright (C) 2017-2020 Intel Corporation <www.intel.com>
+
+obj-y	+= board.o
+obj-y	+= clock_manager.o
+obj-y	+= misc.o
+
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
+obj-y	+= clock_manager_gen5.o
+obj-y	+= misc_gen5.o
+obj-y	+= reset_manager_gen5.o
+obj-y	+= scan_manager.o
+obj-y	+= system_manager_gen5.o
+obj-y	+= timer.o
+obj-y	+= wrap_pll_config.o
+obj-y	+= fpga_manager.o
+endif
+
+ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
+obj-y	+= clock_manager_arria10.o
+obj-y	+= misc_arria10.o
+obj-y	+= pinmux_arria10.o
+obj-y	+= reset_manager_arria10.o
+endif
+
+ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
+obj-y	+= clock_manager_s10.o
+obj-y	+= lowlevel_init_soc64.o
+obj-y	+= mailbox_s10.o
+obj-y	+= misc_s10.o
+obj-y	+= mmu-arm64_s10.o
+obj-y	+= reset_manager_s10.o
+obj-y	+= system_manager_soc64.o
+obj-y	+= timer_s10.o
+obj-y	+= wrap_handoff_soc64.o
+obj-y	+= wrap_pll_config_soc64.o
+endif
+
+ifdef CONFIG_TARGET_SOCFPGA_AGILEX
+obj-y	+= clock_manager_agilex.o
+obj-y	+= lowlevel_init_soc64.o
+obj-y	+= mailbox_s10.o
+obj-y	+= misc_s10.o
+obj-y	+= mmu-arm64_s10.o
+obj-y	+= reset_manager_s10.o
+obj-$(CONFIG_SOCFPGA_SECURE_VAB_AUTH)	+= secure_vab.o
+obj-y	+= system_manager_soc64.o
+obj-y	+= timer_s10.o
+obj-$(CONFIG_SOCFPGA_SECURE_VAB_AUTH)	+= vab.o
+obj-y	+= wrap_handoff_soc64.o
+obj-y	+= wrap_pll_config_soc64.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
+obj-y	+= spl_gen5.o
+obj-y	+= freeze_controller.o
+obj-y	+= wrap_iocsr_config.o
+obj-y	+= wrap_pinmux_config.o
+obj-y	+= wrap_sdram_config.o
+endif
+ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
+obj-y	+= spl_a10.o
+endif
+ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
+obj-y	+= firewall.o
+obj-y	+= spl_s10.o
+obj-y	+= spl_soc64.o
+endif
+ifdef CONFIG_TARGET_SOCFPGA_AGILEX
+obj-y	+= firewall.o
+obj-y	+= spl_agilex.o
+obj-y	+= spl_soc64.o
+endif
+else
+obj-$(CONFIG_SPL_ATF) += secure_reg_helper.o
+obj-$(CONFIG_SPL_ATF) += smc_api.o
+endif
+
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
+# QTS-generated config file wrappers
+CFLAGS_wrap_iocsr_config.o	+= -I$(srctree)/board/$(BOARDDIR)
+CFLAGS_wrap_pinmux_config.o	+= -I$(srctree)/board/$(BOARDDIR)
+CFLAGS_wrap_pll_config.o	+= -I$(srctree)/board/$(BOARDDIR)
+CFLAGS_wrap_sdram_config.o	+= -I$(srctree)/board/$(BOARDDIR)
+endif
diff --git a/roms/u-boot/arch/arm/mach-socfpga/board.c b/roms/u-boot/arch/arm/mach-socfpga/board.c
new file mode 100644
index 000000000..650122fcd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/board.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Altera SoCFPGA common board code
+ *
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include <common.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/secure_vab.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <usb.h>
+#include <usb/dwc2_udc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void s_init(void) {
+#ifndef CONFIG_ARM64
+	/*
+	 * Preconfigure ACTLR and CPACR, make sure Write Full Line of Zeroes
+	 * is disabled in ACTLR.
+	 * This is optional on CycloneV / ArriaV.
+	 * This is mandatory on Arria10, otherwise Linux refuses to boot.
+	 */
+	asm volatile(
+		"mcr p15, 0, %0, c1, c0, 1\n"
+		"mcr p15, 0, %0, c1, c0, 2\n"
+		"isb\n"
+		"dsb\n"
+	::"r"(0x0));
+#endif
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	/* Address of boot parameters for ATAG (if ATAG is used) */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	fdtdec_setup_memory_banksize();
+
+	return 0;
+}
+
+#ifdef CONFIG_USB_GADGET
+struct dwc2_plat_otg_data socfpga_otg_data = {
+	.usb_gusbcfg	= 0x1417,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	int node[2], count;
+	fdt_addr_t addr;
+
+	count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc",
+					   COMPAT_ALTERA_SOCFPGA_DWC2USB,
+					   node, 2);
+	if (count <= 0)	/* No controller found. */
+		return 0;
+
+	addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg");
+	if (addr == FDT_ADDR_T_NONE) {
+		printf("UDC Controller has no 'reg' property!\n");
+		return -EINVAL;
+	}
+
+	/* Patch the address from OF into the controller pdata. */
+	socfpga_otg_data.regs_otg = addr;
+
+	return dwc2_udc_probe(&socfpga_otg_data);
+}
+
+int g_dnl_board_usb_cable_connected(void)
+{
+	return 1;
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+__weak int board_fit_config_name_match(const char *name)
+{
+	/* Just empty function now - can't decide what to choose */
+	debug("%s: %s\n", __func__, name);
+
+	return 0;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_FIT_IMAGE_POST_PROCESS)
+void board_fit_image_post_process(void **p_image, size_t *p_size)
+{
+	if (IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH)) {
+		if (socfpga_vendor_authentication(p_image, p_size))
+			hang();
+	}
+}
+#endif
+
+#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_FIT)
+void board_prep_linux(bootm_headers_t *images)
+{
+	if (IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH) &&
+	    !IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE)) {
+		/*
+		 * Ensure the OS is always booted from FIT and with
+		 * VAB signed certificate
+		 */
+		if (!images->fit_uname_cfg) {
+			printf("Please use FIT with VAB signed images!\n");
+			hang();
+		}
+
+		env_set_hex("fdt_addr", (ulong)images->ft_addr);
+		debug("images->ft_addr = 0x%08lx\n", (ulong)images->ft_addr);
+	}
+
+	if (IS_ENABLED(CONFIG_CADENCE_QSPI)) {
+		if (env_get("linux_qspi_enable"))
+			run_command(env_get("linux_qspi_enable"), 0);
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-socfpga/clock_manager.c b/roms/u-boot/arch/arm/mach-socfpga/clock_manager.c
new file mode 100644
index 000000000..9e645a425
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/clock_manager.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/system_manager.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <command.h>
+#include <init.h>
+#include <wait_bit.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void cm_wait_for_lock(u32 mask)
+{
+	u32 inter_val;
+	u32 retry = 0;
+	do {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+		inter_val = readl(socfpga_get_clkmgr_addr() +
+				  CLKMGR_INTER) & mask;
+#else
+		inter_val = readl(socfpga_get_clkmgr_addr() +
+				  CLKMGR_STAT) & mask;
+#endif
+		/* Wait for stable lock */
+		if (inter_val == mask)
+			retry++;
+		else
+			retry = 0;
+		if (retry >= 10)
+			break;
+	} while (1);
+}
+
+/* function to poll in the fsm busy bit */
+int cm_wait_for_fsm(void)
+{
+	return wait_for_bit_le32((const void *)(socfpga_get_clkmgr_addr() +
+				 CLKMGR_STAT), CLKMGR_STAT_BUSY, false, 20000,
+				 false);
+}
+
+int set_cpu_clk_info(void)
+{
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	/* Calculate the clock frequencies required for drivers */
+	cm_get_l4_sp_clk_hz();
+	cm_get_mmc_controller_clk_hz();
+#endif
+
+	gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
+	gd->bd->bi_dsp_freq = 0;
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
+#else
+	gd->bd->bi_ddr_freq = 0;
+#endif
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_TARGET_SOCFPGA_SOC64)
+int cm_set_qspi_controller_clk_hz(u32 clk_hz)
+{
+	u32 reg;
+	u32 clk_khz;
+
+	/*
+	 * Store QSPI ref clock and set into sysmgr boot register.
+	 * Only clock freq in kHz degree is accepted due to limited bits[27:0]
+	 * is reserved for storing the QSPI clock freq into boot scratch cold0
+	 * register.
+	 */
+	if (clk_hz < 1000)
+		return -EINVAL;
+
+	clk_khz = clk_hz / 1000;
+	printf("QSPI: Reference clock at %d kHz\n", clk_khz);
+
+	reg = (readl(socfpga_get_sysmgr_addr() +
+		     SYSMGR_SOC64_BOOT_SCRATCH_COLD0)) &
+		     ~(SYSMGR_SCRATCH_REG_0_QSPI_REFCLK_MASK);
+
+	writel((clk_khz & SYSMGR_SCRATCH_REG_0_QSPI_REFCLK_MASK) | reg,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_BOOT_SCRATCH_COLD0);
+
+	return 0;
+}
+
+unsigned int cm_get_qspi_controller_clk_hz(void)
+{
+	return (readl(socfpga_get_sysmgr_addr() +
+		     SYSMGR_SOC64_BOOT_SCRATCH_COLD0) &
+		     SYSMGR_SCRATCH_REG_0_QSPI_REFCLK_MASK) * 1000;
+}
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+static int do_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
+			 char *const argv[])
+{
+	cm_print_clock_quick_summary();
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_showclocks,
+	"display clocks",
+	""
+);
+#endif
diff --git a/roms/u-boot/arch/arm/mach-socfpga/clock_manager_agilex.c b/roms/u-boot/arch/arm/mach-socfpga/clock_manager_agilex.c
new file mode 100644
index 000000000..e035c09aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/clock_manager_agilex.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <malloc.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/system_manager.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <dt-bindings/clock/agilex-clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static ulong cm_get_rate_dm(u32 id)
+{
+	struct udevice *dev;
+	struct clk clk;
+	ulong rate;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+					  DM_DRIVER_GET(socfpga_agilex_clk),
+					  &dev);
+	if (ret)
+		return 0;
+
+	clk.id = id;
+	ret = clk_request(dev, &clk);
+	if (ret < 0)
+		return 0;
+
+	rate = clk_get_rate(&clk);
+
+	clk_free(&clk);
+
+	if ((rate == (unsigned long)-ENOSYS) ||
+	    (rate == (unsigned long)-ENXIO) ||
+	    (rate == (unsigned long)-EIO)) {
+		debug("%s id %u: clk_get_rate err: %ld\n",
+		      __func__, id, rate);
+		return 0;
+	}
+
+	return rate;
+}
+
+static u32 cm_get_rate_dm_khz(u32 id)
+{
+	return cm_get_rate_dm(id) / 1000;
+}
+
+unsigned long cm_get_mpu_clk_hz(void)
+{
+	return cm_get_rate_dm(AGILEX_MPU_CLK);
+}
+
+unsigned int cm_get_l4_sys_free_clk_hz(void)
+{
+	return cm_get_rate_dm(AGILEX_L4_SYS_FREE_CLK);
+}
+
+void cm_print_clock_quick_summary(void)
+{
+	printf("MPU       %10d kHz\n",
+	       cm_get_rate_dm_khz(AGILEX_MPU_CLK));
+	printf("L4 Main	    %8d kHz\n",
+	       cm_get_rate_dm_khz(AGILEX_L4_MAIN_CLK));
+	printf("L4 sys free %8d kHz\n",
+	       cm_get_rate_dm_khz(AGILEX_L4_SYS_FREE_CLK));
+	printf("L4 MP       %8d kHz\n",
+	       cm_get_rate_dm_khz(AGILEX_L4_MP_CLK));
+	printf("L4 SP       %8d kHz\n",
+	       cm_get_rate_dm_khz(AGILEX_L4_SP_CLK));
+	printf("SDMMC       %8d kHz\n",
+	       cm_get_rate_dm_khz(AGILEX_SDMMC_CLK));
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/clock_manager_arria10.c b/roms/u-boot/arch/arm/mach-socfpga/clock_manager_arria10.c
new file mode 100644
index 000000000..58d5d3fd8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/clock_manager_arria10.c
@@ -0,0 +1,1014 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <clk.h>
+#include <dm/device-internal.h>
+#include <asm/arch/clock_manager.h>
+#include <linux/delay.h>
+
+#ifdef CONFIG_SPL_BUILD
+
+static u32 eosc1_hz;
+static u32 cb_intosc_hz;
+static u32 f2s_free_hz;
+
+struct mainpll_cfg {
+	u32 vco0_psrc;
+	u32 vco1_denom;
+	u32 vco1_numer;
+	u32 mpuclk;
+	u32 mpuclk_cnt;
+	u32 mpuclk_src;
+	u32 nocclk;
+	u32 nocclk_cnt;
+	u32 nocclk_src;
+	u32 cntr2clk_cnt;
+	u32 cntr3clk_cnt;
+	u32 cntr4clk_cnt;
+	u32 cntr5clk_cnt;
+	u32 cntr6clk_cnt;
+	u32 cntr7clk_cnt;
+	u32 cntr7clk_src;
+	u32 cntr8clk_cnt;
+	u32 cntr9clk_cnt;
+	u32 cntr9clk_src;
+	u32 cntr15clk_cnt;
+	u32 nocdiv_l4mainclk;
+	u32 nocdiv_l4mpclk;
+	u32 nocdiv_l4spclk;
+	u32 nocdiv_csatclk;
+	u32 nocdiv_cstraceclk;
+	u32 nocdiv_cspdbclk;
+};
+
+struct perpll_cfg {
+	u32 vco0_psrc;
+	u32 vco1_denom;
+	u32 vco1_numer;
+	u32 cntr2clk_cnt;
+	u32 cntr2clk_src;
+	u32 cntr3clk_cnt;
+	u32 cntr3clk_src;
+	u32 cntr4clk_cnt;
+	u32 cntr4clk_src;
+	u32 cntr5clk_cnt;
+	u32 cntr5clk_src;
+	u32 cntr6clk_cnt;
+	u32 cntr6clk_src;
+	u32 cntr7clk_cnt;
+	u32 cntr8clk_cnt;
+	u32 cntr8clk_src;
+	u32 cntr9clk_cnt;
+	u32 cntr9clk_src;
+	u32 emacctl_emac0sel;
+	u32 emacctl_emac1sel;
+	u32 emacctl_emac2sel;
+	u32 gpiodiv_gpiodbclk;
+};
+
+struct strtou32 {
+	const char *str;
+	const u32 val;
+};
+
+static const struct strtou32 mainpll_cfg_tab[] = {
+	{ "vco0-psrc", offsetof(struct mainpll_cfg, vco0_psrc) },
+	{ "vco1-denom", offsetof(struct mainpll_cfg, vco1_denom) },
+	{ "vco1-numer", offsetof(struct mainpll_cfg, vco1_numer) },
+	{ "mpuclk-cnt", offsetof(struct mainpll_cfg, mpuclk_cnt) },
+	{ "mpuclk-src", offsetof(struct mainpll_cfg, mpuclk_src) },
+	{ "nocclk-cnt", offsetof(struct mainpll_cfg, nocclk_cnt) },
+	{ "nocclk-src", offsetof(struct mainpll_cfg, nocclk_src) },
+	{ "cntr2clk-cnt", offsetof(struct mainpll_cfg, cntr2clk_cnt) },
+	{ "cntr3clk-cnt", offsetof(struct mainpll_cfg, cntr3clk_cnt) },
+	{ "cntr4clk-cnt", offsetof(struct mainpll_cfg, cntr4clk_cnt) },
+	{ "cntr5clk-cnt", offsetof(struct mainpll_cfg, cntr5clk_cnt) },
+	{ "cntr6clk-cnt", offsetof(struct mainpll_cfg, cntr6clk_cnt) },
+	{ "cntr7clk-cnt", offsetof(struct mainpll_cfg, cntr7clk_cnt) },
+	{ "cntr7clk-src", offsetof(struct mainpll_cfg, cntr7clk_src) },
+	{ "cntr8clk-cnt", offsetof(struct mainpll_cfg, cntr8clk_cnt) },
+	{ "cntr9clk-cnt", offsetof(struct mainpll_cfg, cntr9clk_cnt) },
+	{ "cntr9clk-src", offsetof(struct mainpll_cfg, cntr9clk_src) },
+	{ "cntr15clk-cnt", offsetof(struct mainpll_cfg, cntr15clk_cnt) },
+	{ "nocdiv-l4mainclk", offsetof(struct mainpll_cfg, nocdiv_l4mainclk) },
+	{ "nocdiv-l4mpclk", offsetof(struct mainpll_cfg, nocdiv_l4mpclk) },
+	{ "nocdiv-l4spclk", offsetof(struct mainpll_cfg, nocdiv_l4spclk) },
+	{ "nocdiv-csatclk", offsetof(struct mainpll_cfg, nocdiv_csatclk) },
+	{ "nocdiv-cstraceclk", offsetof(struct mainpll_cfg, nocdiv_cstraceclk) },
+	{ "nocdiv-cspdbgclk", offsetof(struct mainpll_cfg, nocdiv_cspdbclk) },
+};
+
+static const struct strtou32 perpll_cfg_tab[] = {
+	{ "vco0-psrc", offsetof(struct perpll_cfg, vco0_psrc) },
+	{ "vco1-denom", offsetof(struct perpll_cfg, vco1_denom) },
+	{ "vco1-numer", offsetof(struct perpll_cfg, vco1_numer) },
+	{ "cntr2clk-cnt", offsetof(struct perpll_cfg, cntr2clk_cnt) },
+	{ "cntr2clk-src", offsetof(struct perpll_cfg, cntr2clk_src) },
+	{ "cntr3clk-cnt", offsetof(struct perpll_cfg, cntr3clk_cnt) },
+	{ "cntr3clk-src", offsetof(struct perpll_cfg, cntr3clk_src) },
+	{ "cntr4clk-cnt", offsetof(struct perpll_cfg, cntr4clk_cnt) },
+	{ "cntr4clk-src", offsetof(struct perpll_cfg, cntr4clk_src) },
+	{ "cntr5clk-cnt", offsetof(struct perpll_cfg, cntr5clk_cnt) },
+	{ "cntr5clk-src", offsetof(struct perpll_cfg, cntr5clk_src) },
+	{ "cntr6clk-cnt", offsetof(struct perpll_cfg, cntr6clk_cnt) },
+	{ "cntr6clk-src", offsetof(struct perpll_cfg, cntr6clk_src) },
+	{ "cntr7clk-cnt", offsetof(struct perpll_cfg, cntr7clk_cnt) },
+	{ "cntr8clk-cnt", offsetof(struct perpll_cfg, cntr8clk_cnt) },
+	{ "cntr8clk-src", offsetof(struct perpll_cfg, cntr8clk_src) },
+	{ "cntr9clk-cnt", offsetof(struct perpll_cfg, cntr9clk_cnt) },
+	{ "emacctl-emac0sel", offsetof(struct perpll_cfg, emacctl_emac0sel) },
+	{ "emacctl-emac1sel", offsetof(struct perpll_cfg, emacctl_emac1sel) },
+	{ "emacctl-emac2sel", offsetof(struct perpll_cfg, emacctl_emac2sel) },
+	{ "gpiodiv-gpiodbclk", offsetof(struct perpll_cfg, gpiodiv_gpiodbclk) },
+};
+
+static const struct strtou32 alteragrp_cfg_tab[] = {
+	{ "nocclk", offsetof(struct mainpll_cfg, nocclk) },
+	{ "mpuclk", offsetof(struct mainpll_cfg, mpuclk) },
+};
+
+struct strtopu32 {
+	const char *str;
+	u32 *p;
+};
+
+const struct strtopu32 dt_to_val[] = {
+	{ "altera_arria10_hps_eosc1", &eosc1_hz },
+	{ "altera_arria10_hps_cb_intosc_ls", &cb_intosc_hz },
+	{ "altera_arria10_hps_f2h_free", &f2s_free_hz },
+};
+
+static int of_to_struct(const void *blob, int node, const struct strtou32 *cfg_tab,
+			int cfg_tab_len, void *cfg)
+{
+	int i;
+	u32 val;
+
+	for (i = 0; i < cfg_tab_len; i++) {
+		if (fdtdec_get_int_array(blob, node, cfg_tab[i].str, &val, 1)) {
+			/* could not find required property */
+			return -EINVAL;
+		}
+		*(u32 *)(cfg + cfg_tab[i].val) = val;
+	}
+
+	return 0;
+}
+
+static int of_get_input_clks(const void *blob)
+{
+	struct udevice *dev;
+	struct clk clk;
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(dt_to_val); i++) {
+		memset(&clk, 0, sizeof(clk));
+
+		ret = uclass_get_device_by_name(UCLASS_CLK, dt_to_val[i].str,
+						&dev);
+		if (ret)
+			return ret;
+
+		ret = clk_request(dev, &clk);
+		if (ret)
+			return ret;
+
+		*dt_to_val[i].p = clk_get_rate(&clk);
+	}
+
+	return 0;
+}
+
+static int of_get_clk_cfg(const void *blob, struct mainpll_cfg *main_cfg,
+			  struct perpll_cfg *per_cfg)
+{
+	int ret, node, child, len;
+	const char *node_name;
+
+	ret = of_get_input_clks(blob);
+	if (ret)
+		return ret;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_ALTERA_SOCFPGA_CLK_INIT);
+
+	if (node < 0)
+		return -EINVAL;
+
+	child = fdt_first_subnode(blob, node);
+
+	if (child < 0)
+		return -EINVAL;
+
+	node_name = fdt_get_name(blob, child, &len);
+
+	while (node_name) {
+		if (!strcmp(node_name, "mainpll")) {
+			if (of_to_struct(blob, child, mainpll_cfg_tab,
+					 ARRAY_SIZE(mainpll_cfg_tab), main_cfg))
+				return -EINVAL;
+		} else if (!strcmp(node_name, "perpll")) {
+			if (of_to_struct(blob, child, perpll_cfg_tab,
+					 ARRAY_SIZE(perpll_cfg_tab), per_cfg))
+				return -EINVAL;
+		} else if (!strcmp(node_name, "alteragrp")) {
+			if (of_to_struct(blob, child, alteragrp_cfg_tab,
+					 ARRAY_SIZE(alteragrp_cfg_tab), main_cfg))
+				return -EINVAL;
+		}
+		child = fdt_next_subnode(blob, child);
+
+		if (child < 0)
+			break;
+
+		node_name = fdt_get_name(blob, child, &len);
+	}
+
+	return 0;
+}
+
+/* calculate the intended main VCO frequency based on handoff */
+static unsigned int cm_calc_handoff_main_vco_clk_hz
+					(struct mainpll_cfg *main_cfg)
+{
+	unsigned int clk_hz;
+
+	/* Check main VCO clock source: eosc, intosc or f2s? */
+	switch (main_cfg->vco0_psrc) {
+	case CLKMGR_MAINPLL_VCO0_PSRC_EOSC:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_MAINPLL_VCO0_PSRC_F2S:
+		clk_hz = f2s_free_hz;
+		break;
+	default:
+		return 0;
+	}
+
+	/* calculate the VCO frequency */
+	clk_hz /= 1 + main_cfg->vco1_denom;
+	clk_hz *= 1 + main_cfg->vco1_numer;
+
+	return clk_hz;
+}
+
+/* calculate the intended periph VCO frequency based on handoff */
+static unsigned int cm_calc_handoff_periph_vco_clk_hz(
+		struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg)
+{
+	unsigned int clk_hz;
+
+	/* Check periph VCO clock source: eosc, intosc, f2s or mainpll? */
+	switch (per_cfg->vco0_psrc) {
+	case CLKMGR_PERPLL_VCO0_PSRC_EOSC:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_PERPLL_VCO0_PSRC_F2S:
+		clk_hz = f2s_free_hz;
+		break;
+	case CLKMGR_PERPLL_VCO0_PSRC_MAIN:
+		clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+		clk_hz /= main_cfg->cntr15clk_cnt;
+		break;
+	default:
+		return 0;
+	}
+
+	/* calculate the VCO frequency */
+	clk_hz /= 1 + per_cfg->vco1_denom;
+	clk_hz *= 1 + per_cfg->vco1_numer;
+
+	return clk_hz;
+}
+
+/* calculate the intended MPU clock frequency based on handoff */
+static unsigned int cm_calc_handoff_mpu_clk_hz(struct mainpll_cfg *main_cfg,
+					       struct perpll_cfg *per_cfg)
+{
+	unsigned int clk_hz;
+
+	/* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+	switch (main_cfg->mpuclk_src) {
+	case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
+		clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+		clk_hz /= (main_cfg->mpuclk & CLKMGR_MAINPLL_MPUCLK_CNT_MSK)
+			   + 1;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
+		clk_hz = cm_calc_handoff_periph_vco_clk_hz(main_cfg, per_cfg);
+		clk_hz /= ((main_cfg->mpuclk >>
+			   CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+			   CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
+		clk_hz = f2s_free_hz;
+		break;
+	default:
+		return 0;
+	}
+
+	clk_hz /= main_cfg->mpuclk_cnt + 1;
+	return clk_hz;
+}
+
+/* calculate the intended NOC clock frequency based on handoff */
+static unsigned int cm_calc_handoff_noc_clk_hz(struct mainpll_cfg *main_cfg,
+					       struct perpll_cfg *per_cfg)
+{
+	unsigned int clk_hz;
+
+	/* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+	switch (main_cfg->nocclk_src) {
+	case CLKMGR_MAINPLL_NOCCLK_SRC_MAIN:
+		clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+		clk_hz /= (main_cfg->nocclk & CLKMGR_MAINPLL_NOCCLK_CNT_MSK)
+			 + 1;
+		break;
+	case CLKMGR_MAINPLL_NOCCLK_SRC_PERI:
+		clk_hz = cm_calc_handoff_periph_vco_clk_hz(main_cfg, per_cfg);
+		clk_hz /= ((main_cfg->nocclk >>
+			   CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) &
+			   CLKMGR_MAINPLL_NOCCLK_CNT_MSK) + 1;
+		break;
+	case CLKMGR_MAINPLL_NOCCLK_SRC_OSC1:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_MAINPLL_NOCCLK_SRC_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_MAINPLL_NOCCLK_SRC_FPGA:
+		clk_hz = f2s_free_hz;
+		break;
+	default:
+		return 0;
+	}
+
+	clk_hz /= main_cfg->nocclk_cnt + 1;
+	return clk_hz;
+}
+
+/* return 1 if PLL ramp is required */
+static int cm_is_pll_ramp_required(int main0periph1,
+				   struct mainpll_cfg *main_cfg,
+				   struct perpll_cfg *per_cfg)
+{
+	/* Check for main PLL */
+	if (main0periph1 == 0) {
+		/*
+		 * PLL ramp is not required if both MPU clock and NOC clock are
+		 * not sourced from main PLL
+		 */
+		if (main_cfg->mpuclk_src != CLKMGR_MAINPLL_MPUCLK_SRC_MAIN &&
+		    main_cfg->nocclk_src != CLKMGR_MAINPLL_NOCCLK_SRC_MAIN)
+			return 0;
+
+		/*
+		 * PLL ramp is required if MPU clock is sourced from main PLL
+		 * and MPU clock is over 900MHz (as advised by HW team)
+		 */
+		if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN &&
+		    (cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg) >
+		     CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ))
+			return 1;
+
+		/*
+		 * PLL ramp is required if NOC clock is sourced from main PLL
+		 * and NOC clock is over 300MHz (as advised by HW team)
+		 */
+		if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN &&
+		    (cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg) >
+		     CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ))
+			return 2;
+
+	} else if (main0periph1 == 1) {
+		/*
+		 * PLL ramp is not required if both MPU clock and NOC clock are
+		 * not sourced from periph PLL
+		 */
+		if (main_cfg->mpuclk_src != CLKMGR_MAINPLL_MPUCLK_SRC_PERI &&
+		    main_cfg->nocclk_src != CLKMGR_MAINPLL_NOCCLK_SRC_PERI)
+			return 0;
+
+		/*
+		 * PLL ramp is required if MPU clock are source from periph PLL
+		 * and MPU clock is over 900MHz (as advised by HW team)
+		 */
+		if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI &&
+		    (cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg) >
+		     CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ))
+			return 1;
+
+		/*
+		 * PLL ramp is required if NOC clock are source from periph PLL
+		 * and NOC clock is over 300MHz (as advised by HW team)
+		 */
+		if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI &&
+		    (cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg) >
+		     CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ))
+			return 2;
+	}
+
+	return 0;
+}
+
+static u32 cm_calculate_numer(struct mainpll_cfg *main_cfg,
+			      struct perpll_cfg *per_cfg,
+			      u32 safe_hz, u32 clk_hz)
+{
+	u32 cnt;
+	u32 clk;
+	u32 shift;
+	u32 mask;
+	u32 denom;
+
+	if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN) {
+		cnt = main_cfg->mpuclk_cnt;
+		clk = main_cfg->mpuclk;
+		shift = 0;
+		mask = CLKMGR_MAINPLL_MPUCLK_CNT_MSK;
+		denom = main_cfg->vco1_denom;
+	} else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN) {
+		cnt = main_cfg->nocclk_cnt;
+		clk = main_cfg->nocclk;
+		shift = 0;
+		mask = CLKMGR_MAINPLL_NOCCLK_CNT_MSK;
+		denom = main_cfg->vco1_denom;
+	} else if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI) {
+		cnt = main_cfg->mpuclk_cnt;
+		clk = main_cfg->mpuclk;
+		shift = CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB;
+		mask = CLKMGR_MAINPLL_MPUCLK_CNT_MSK;
+		denom = per_cfg->vco1_denom;
+	} else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI) {
+		cnt = main_cfg->nocclk_cnt;
+		clk = main_cfg->nocclk;
+		shift = CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB;
+		mask = CLKMGR_MAINPLL_NOCCLK_CNT_MSK;
+		denom = per_cfg->vco1_denom;
+	} else {
+		return 0;
+	}
+
+	return (safe_hz / clk_hz) * (cnt + 1) * (((clk >> shift) & mask) + 1) *
+		(1 + denom) - 1;
+}
+
+/*
+ * Calculate the new PLL numerator which is based on existing DTS hand off and
+ * intended safe frequency (safe_hz). Note that PLL ramp is only modifying the
+ * numerator while maintaining denominator as denominator will influence the
+ * jitter condition. Please refer A10 HPS TRM for the jitter guide. Note final
+ * value for numerator is minus with 1 to cater our register value
+ * representation.
+ */
+static unsigned int cm_calc_safe_pll_numer(int main0periph1,
+					   struct mainpll_cfg *main_cfg,
+					   struct perpll_cfg *per_cfg,
+					   unsigned int safe_hz)
+{
+	unsigned int clk_hz = 0;
+
+	/* Check for main PLL */
+	if (main0periph1 == 0) {
+		/* Check main VCO clock source: eosc, intosc or f2s? */
+		switch (main_cfg->vco0_psrc) {
+		case CLKMGR_MAINPLL_VCO0_PSRC_EOSC:
+			clk_hz = eosc1_hz;
+			break;
+		case CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC:
+			clk_hz = cb_intosc_hz;
+			break;
+		case CLKMGR_MAINPLL_VCO0_PSRC_F2S:
+			clk_hz = f2s_free_hz;
+			break;
+		default:
+			return 0;
+		}
+	} else if (main0periph1 == 1) {
+		/* Check periph VCO clock source: eosc, intosc, f2s, mainpll */
+		switch (per_cfg->vco0_psrc) {
+		case CLKMGR_PERPLL_VCO0_PSRC_EOSC:
+			clk_hz = eosc1_hz;
+			break;
+		case CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC:
+			clk_hz = cb_intosc_hz;
+			break;
+		case CLKMGR_PERPLL_VCO0_PSRC_F2S:
+			clk_hz = f2s_free_hz;
+			break;
+		case CLKMGR_PERPLL_VCO0_PSRC_MAIN:
+			clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+			clk_hz /= main_cfg->cntr15clk_cnt;
+			break;
+		default:
+			return 0;
+		}
+	} else {
+		return 0;
+	}
+
+	return cm_calculate_numer(main_cfg, per_cfg, safe_hz, clk_hz);
+}
+
+/* ramping the main PLL to final value */
+static void cm_pll_ramp_main(struct mainpll_cfg *main_cfg,
+			     struct perpll_cfg *per_cfg,
+			     unsigned int pll_ramp_main_hz)
+{
+	unsigned int clk_hz = 0, clk_incr_hz = 0, clk_final_hz = 0;
+
+	/* find out the increment value */
+	if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN) {
+		clk_incr_hz = CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ;
+		clk_final_hz = cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg);
+	} else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN) {
+		clk_incr_hz = CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ;
+		clk_final_hz = cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg);
+	}
+
+	/* execute the ramping here */
+	for (clk_hz = pll_ramp_main_hz + clk_incr_hz;
+	     clk_hz < clk_final_hz; clk_hz += clk_incr_hz) {
+		writel((main_cfg->vco1_denom <<
+			CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+			cm_calc_safe_pll_numer(0, main_cfg, per_cfg, clk_hz),
+			socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO1);
+		mdelay(1);
+		cm_wait_for_lock(LOCKED_MASK);
+	}
+	writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+		main_cfg->vco1_numer,
+		socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO1);
+	mdelay(1);
+	cm_wait_for_lock(LOCKED_MASK);
+}
+
+/* ramping the periph PLL to final value */
+static void cm_pll_ramp_periph(struct mainpll_cfg *main_cfg,
+			       struct perpll_cfg *per_cfg,
+			       unsigned int pll_ramp_periph_hz)
+{
+	unsigned int clk_hz = 0, clk_incr_hz = 0, clk_final_hz = 0;
+
+	/* find out the increment value */
+	if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI) {
+		clk_incr_hz = CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ;
+		clk_final_hz = cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg);
+	} else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI) {
+		clk_incr_hz = CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ;
+		clk_final_hz = cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg);
+	}
+	/* execute the ramping here */
+	for (clk_hz = pll_ramp_periph_hz + clk_incr_hz;
+	     clk_hz < clk_final_hz; clk_hz += clk_incr_hz) {
+		writel((per_cfg->vco1_denom <<
+			      CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+			      cm_calc_safe_pll_numer(1, main_cfg, per_cfg,
+						     clk_hz),
+			      socfpga_get_clkmgr_addr() +
+			      CLKMGR_A10_PERPLL_VCO1);
+		mdelay(1);
+		cm_wait_for_lock(LOCKED_MASK);
+	}
+	writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+		      per_cfg->vco1_numer,
+		      socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO1);
+	mdelay(1);
+	cm_wait_for_lock(LOCKED_MASK);
+}
+
+/*
+ * Setup clocks while making no assumptions of the
+ * previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ *
+ * Put all plls in bypass
+ *
+ * Put all plls VCO registers back to reset value (bgpwr dwn).
+ *
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ *
+ * Delay 5 us.
+ *
+ * Deassert bg pwr dn and set numerator and denominator
+ *
+ * Start 7 us timer.
+ *
+ * set internal dividers
+ *
+ * Wait for 7 us timer.
+ *
+ * Enable plls
+ *
+ * Set external dividers while plls are locking
+ *
+ * Wait for pll lock
+ *
+ * Assert/deassert outreset all.
+ *
+ * Take all pll's out of bypass
+ *
+ * Clear safe mode
+ *
+ * set source main and peripheral clocks
+ *
+ * Ungate clocks
+ */
+
+static int cm_full_cfg(struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg)
+{
+	unsigned int pll_ramp_main_hz = 0, pll_ramp_periph_hz = 0,
+		ramp_required;
+
+	/* gate off all mainpll clock excpet HW managed clock */
+	writel(CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK |
+		CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK,
+		socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_ENR);
+
+	/* now we can gate off the rest of the peripheral clocks */
+	writel(0, socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_EN);
+
+	/* Put all plls in external bypass */
+	writel(CLKMGR_MAINPLL_BYPASS_RESET,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_BYPASSS);
+	writel(CLKMGR_PERPLL_BYPASS_RESET,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_BYPASSS);
+
+	/*
+	 * Put all plls VCO registers back to reset value.
+	 * Some code might have messed with them. At same time set the
+	 * desired clock source
+	 */
+	writel(CLKMGR_MAINPLL_VCO0_RESET |
+	       CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK |
+	       (main_cfg->vco0_psrc << CLKMGR_MAINPLL_VCO0_PSRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO0);
+
+	writel(CLKMGR_PERPLL_VCO0_RESET |
+	       CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK |
+	       (per_cfg->vco0_psrc << CLKMGR_PERPLL_VCO0_PSRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO0);
+
+	writel(CLKMGR_MAINPLL_VCO1_RESET,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO1);
+	writel(CLKMGR_PERPLL_VCO1_RESET,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO1);
+
+	/* clear the interrupt register status register */
+	writel(CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK |
+		CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_MAINPLLACHIEVED_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLACHIEVED_SET_MSK,
+		socfpga_get_clkmgr_addr() + CLKMGR_A10_INTR);
+
+	/* Program VCO Numerator and Denominator for main PLL */
+	ramp_required = cm_is_pll_ramp_required(0, main_cfg, per_cfg);
+	if (ramp_required) {
+		/* set main PLL to safe starting threshold frequency */
+		if (ramp_required == 1)
+			pll_ramp_main_hz = CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ;
+		else if (ramp_required == 2)
+			pll_ramp_main_hz = CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ;
+
+		writel((main_cfg->vco1_denom <<
+			CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+			cm_calc_safe_pll_numer(0, main_cfg, per_cfg,
+					       pll_ramp_main_hz),
+			socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO1);
+	} else
+		writel((main_cfg->vco1_denom <<
+		       CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+		       main_cfg->vco1_numer,
+		       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO1);
+
+	/* Program VCO Numerator and Denominator for periph PLL */
+	ramp_required = cm_is_pll_ramp_required(1, main_cfg, per_cfg);
+	if (ramp_required) {
+		/* set periph PLL to safe starting threshold frequency */
+		if (ramp_required == 1)
+			pll_ramp_periph_hz =
+				CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ;
+		else if (ramp_required == 2)
+			pll_ramp_periph_hz =
+				CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ;
+
+		writel((per_cfg->vco1_denom <<
+			CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+			cm_calc_safe_pll_numer(1, main_cfg, per_cfg,
+					       pll_ramp_periph_hz),
+			socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO1);
+	} else
+		writel((per_cfg->vco1_denom <<
+			CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+			per_cfg->vco1_numer,
+			socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO1);
+
+	/* Wait for at least 5 us */
+	udelay(5);
+
+	/* Now deassert BGPWRDN and PWRDN */
+	clrbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO0,
+		     CLKMGR_MAINPLL_VCO0_BGPWRDN_SET_MSK |
+		     CLKMGR_MAINPLL_VCO0_PWRDN_SET_MSK);
+	clrbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO0,
+		     CLKMGR_PERPLL_VCO0_BGPWRDN_SET_MSK |
+		     CLKMGR_PERPLL_VCO0_PWRDN_SET_MSK);
+
+	/* Wait for at least 7 us */
+	udelay(7);
+
+	/* enable the VCO and disable the external regulator to PLL */
+	writel((readl(socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO0) &
+		~CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK) |
+		CLKMGR_MAINPLL_VCO0_EN_SET_MSK,
+		socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO0);
+	writel((readl(socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO0) &
+		~CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK) |
+		CLKMGR_PERPLL_VCO0_EN_SET_MSK,
+		socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO0);
+
+	/* setup all the main PLL counter and clock source */
+	writel(main_cfg->nocclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_ALTR_NOCCLK);
+	writel(main_cfg->mpuclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_ALTR_MPUCLK);
+
+	/* main_emaca_clk divider */
+	writel(main_cfg->cntr2clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR2CLK);
+	/* main_emacb_clk divider */
+	writel(main_cfg->cntr3clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR3CLK);
+	/* main_emac_ptp_clk divider */
+	writel(main_cfg->cntr4clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR4CLK);
+	/* main_gpio_db_clk divider */
+	writel(main_cfg->cntr5clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR5CLK);
+	/* main_sdmmc_clk divider */
+	writel(main_cfg->cntr6clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR6CLK);
+	/* main_s2f_user0_clk divider */
+	writel(main_cfg->cntr7clk_cnt |
+	       (main_cfg->cntr7clk_src << CLKMGR_MAINPLL_CNTR7CLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR7CLK);
+	/* main_s2f_user1_clk divider */
+	writel(main_cfg->cntr8clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR8CLK);
+	/* main_hmc_pll_clk divider */
+	writel(main_cfg->cntr9clk_cnt |
+	       (main_cfg->cntr9clk_src << CLKMGR_MAINPLL_CNTR9CLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR9CLK);
+	/* main_periph_ref_clk divider */
+	writel(main_cfg->cntr15clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_CNTR15CLK);
+
+	/* setup all the peripheral PLL counter and clock source */
+	/* peri_emaca_clk divider */
+	writel(per_cfg->cntr2clk_cnt |
+	       (per_cfg->cntr2clk_src << CLKMGR_PERPLL_CNTR2CLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_CNTR2CLK);
+	/* peri_emacb_clk divider */
+	writel(per_cfg->cntr3clk_cnt |
+	       (per_cfg->cntr3clk_src << CLKMGR_PERPLL_CNTR3CLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_CNTR3CLK);
+	/* peri_emac_ptp_clk divider */
+	writel(per_cfg->cntr4clk_cnt |
+	       (per_cfg->cntr4clk_src << CLKMGR_PERPLL_CNTR4CLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_CNTR4CLK);
+	/* peri_gpio_db_clk divider */
+	writel(per_cfg->cntr5clk_cnt |
+	       (per_cfg->cntr5clk_src << CLKMGR_PERPLL_CNTR5CLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_CNTR5CLK);
+	/* peri_sdmmc_clk divider */
+	writel(per_cfg->cntr6clk_cnt |
+	       (per_cfg->cntr6clk_src << CLKMGR_PERPLL_CNTR6CLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_CNTR6CLK);
+	/* peri_s2f_user0_clk divider */
+	writel(per_cfg->cntr7clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_CNTR7CLK);
+	/* peri_s2f_user1_clk divider */
+	writel(per_cfg->cntr8clk_cnt |
+	       (per_cfg->cntr8clk_src << CLKMGR_PERPLL_CNTR8CLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_CNTR8CLK);
+	/* peri_hmc_pll_clk divider */
+	writel(per_cfg->cntr9clk_cnt,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_CNTR9CLK);
+
+	/* setup all the external PLL counter */
+	/* mpu wrapper / external divider */
+	writel(main_cfg->mpuclk_cnt |
+	       (main_cfg->mpuclk_src << CLKMGR_MAINPLL_MPUCLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_MPUCLK);
+	/* NOC wrapper / external divider */
+	writel(main_cfg->nocclk_cnt |
+	       (main_cfg->nocclk_src << CLKMGR_MAINPLL_NOCCLK_SRC_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_NOCCLK);
+	/* NOC subclock divider such as l4 */
+	writel(main_cfg->nocdiv_l4mainclk |
+	       (main_cfg->nocdiv_l4mpclk <<
+		CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB) |
+	       (main_cfg->nocdiv_l4spclk <<
+		CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB) |
+	       (main_cfg->nocdiv_csatclk <<
+		CLKMGR_MAINPLL_NOCDIV_CSATCLK_LSB) |
+	       (main_cfg->nocdiv_cstraceclk <<
+		CLKMGR_MAINPLL_NOCDIV_CSTRACECLK_LSB) |
+	       (main_cfg->nocdiv_cspdbclk <<
+		CLKMGR_MAINPLL_NOCDIV_CSPDBGCLK_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_NOCDIV);
+	/* gpio_db external divider */
+	writel(per_cfg->gpiodiv_gpiodbclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_GPIOFIV);
+
+	/* setup the EMAC clock mux select */
+	writel((per_cfg->emacctl_emac0sel <<
+		CLKMGR_PERPLL_EMACCTL_EMAC0SEL_LSB) |
+	       (per_cfg->emacctl_emac1sel <<
+		CLKMGR_PERPLL_EMACCTL_EMAC1SEL_LSB) |
+	       (per_cfg->emacctl_emac2sel <<
+		CLKMGR_PERPLL_EMACCTL_EMAC2SEL_LSB),
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_EMACCTL);
+
+	/* at this stage, check for PLL lock status */
+	cm_wait_for_lock(LOCKED_MASK);
+
+	/*
+	 * after locking, but before taking out of bypass,
+	 * assert/deassert outresetall
+	 */
+	/* assert mainpll outresetall */
+	setbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO0,
+		     CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK);
+	/* assert perpll outresetall */
+	setbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO0,
+		     CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK);
+	/* de-assert mainpll outresetall */
+	clrbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_VCO0,
+		     CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK);
+	/* de-assert perpll outresetall */
+	clrbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_VCO0,
+		     CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK);
+
+	/* Take all PLLs out of bypass when boot mode is cleared. */
+	/* release mainpll from bypass */
+	writel(CLKMGR_MAINPLL_BYPASS_RESET,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_BYPASSR);
+	/* wait till Clock Manager is not busy */
+	cm_wait_for_fsm();
+
+	/* release perpll from bypass */
+	writel(CLKMGR_PERPLL_BYPASS_RESET,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_BYPASSR);
+	/* wait till Clock Manager is not busy */
+	cm_wait_for_fsm();
+
+	/* clear boot mode */
+	clrbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_A10_CTRL,
+		     CLKMGR_CLKMGR_CTL_BOOTMOD_SET_MSK);
+	/* wait till Clock Manager is not busy */
+	cm_wait_for_fsm();
+
+	/* At here, we need to ramp to final value if needed */
+	if (pll_ramp_main_hz != 0)
+		cm_pll_ramp_main(main_cfg, per_cfg, pll_ramp_main_hz);
+	if (pll_ramp_periph_hz != 0)
+		cm_pll_ramp_periph(main_cfg, per_cfg, pll_ramp_periph_hz);
+
+	/* Now ungate non-hw-managed clocks */
+	writel(CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK |
+	       CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_MAINPLL_ENS);
+	writel(CLKMGR_PERPLL_EN_RESET,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_PERPLL_ENS);
+
+	/* Clear the loss lock and slip bits as they might set during
+	clock reconfiguration */
+	writel(CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK |
+	       CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK |
+	       CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK |
+	       CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK |
+	       CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK |
+	       CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_A10_INTR);
+
+	return 0;
+}
+
+static void cm_use_intosc(void)
+{
+	setbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_A10_CTRL,
+		     CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK);
+}
+
+int cm_basic_init(const void *blob)
+{
+	struct mainpll_cfg main_cfg;
+	struct perpll_cfg per_cfg;
+	int rval;
+
+	/* initialize to zero for use case of optional node */
+	memset(&main_cfg, 0, sizeof(main_cfg));
+	memset(&per_cfg, 0, sizeof(per_cfg));
+
+	rval = of_get_clk_cfg(blob, &main_cfg, &per_cfg);
+	if (rval)
+		return rval;
+
+	cm_use_intosc();
+
+	return cm_full_cfg(&main_cfg, &per_cfg);
+}
+#endif
+
+static u32 cm_get_rate_dm(char *name)
+{
+	struct uclass *uc;
+	struct udevice *dev = NULL;
+	struct clk clk = { 0 };
+	ulong rate;
+	int ret;
+
+	/* Device addresses start at 1 */
+	ret = uclass_get(UCLASS_CLK, &uc);
+	if (ret)
+		return 0;
+
+	ret = uclass_get_device_by_name(UCLASS_CLK, name, &dev);
+	if (ret)
+		return 0;
+
+	ret = device_probe(dev);
+	if (ret)
+		return 0;
+
+	ret = clk_request(dev, &clk);
+	if (ret)
+		return 0;
+
+	rate = clk_get_rate(&clk);
+
+	clk_free(&clk);
+
+	return rate;
+}
+
+static u32 cm_get_rate_dm_khz(char *name)
+{
+	return cm_get_rate_dm(name) / 1000;
+}
+
+unsigned long cm_get_mpu_clk_hz(void)
+{
+	return cm_get_rate_dm("main_mpu_base_clk");
+}
+
+unsigned int cm_get_qspi_controller_clk_hz(void)
+{
+	return cm_get_rate_dm("qspi_clk");
+}
+
+unsigned int cm_get_l4_sp_clk_hz(void)
+{
+	return cm_get_rate_dm("l4_sp_clk");
+}
+
+void cm_print_clock_quick_summary(void)
+{
+	printf("MPU       %10d kHz\n", cm_get_rate_dm_khz("main_mpu_base_clk"));
+	printf("MMC         %8d kHz\n", cm_get_rate_dm_khz("sdmmc_clk"));
+	printf("QSPI        %8d kHz\n", cm_get_rate_dm_khz("qspi_clk"));
+	printf("SPI         %8d kHz\n", cm_get_rate_dm_khz("spi_m_clk"));
+	printf("EOSC1       %8d kHz\n", cm_get_rate_dm_khz("osc1"));
+	printf("cb_intosc   %8d kHz\n", cm_get_rate_dm_khz("cb_intosc_ls_clk"));
+	printf("f2s_free    %8d kHz\n", cm_get_rate_dm_khz("f2s_free_clk"));
+	printf("Main VCO    %8d kHz\n", cm_get_rate_dm_khz("main_pll@40"));
+	printf("NOC         %8d kHz\n", cm_get_rate_dm_khz("main_noc_base_clk"));
+	printf("L4 Main	    %8d kHz\n", cm_get_rate_dm_khz("l4_main_clk"));
+	printf("L4 MP       %8d kHz\n", cm_get_rate_dm_khz("l4_mp_clk"));
+	printf("L4 SP       %8d kHz\n", cm_get_rate_dm_khz("l4_sp_clk"));
+	printf("L4 sys free %8d kHz\n", cm_get_rate_dm_khz("l4_sys_free_clk"));
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/clock_manager_gen5.c b/roms/u-boot/arch/arm/mach-socfpga/clock_manager_gen5.c
new file mode 100644
index 000000000..8fa276079
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/clock_manager_gen5.c
@@ -0,0 +1,562 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <time.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <asm/arch/clock_manager.h>
+#include <wait_bit.h>
+
+/*
+ * function to write the bypass register which requires a poll of the
+ * busy bit
+ */
+static void cm_write_bypass(u32 val)
+{
+	writel(val, socfpga_get_clkmgr_addr() + CLKMGR_GEN5_BYPASS);
+	cm_wait_for_fsm();
+}
+
+/* function to write the ctrl register which requires a poll of the busy bit */
+static void cm_write_ctrl(u32 val)
+{
+	writel(val, socfpga_get_clkmgr_addr() + CLKMGR_GEN5_CTRL);
+	cm_wait_for_fsm();
+}
+
+/* function to write a clock register that has phase information */
+static int cm_write_with_phase(u32 value, const void *reg_address, u32 mask)
+{
+	int ret;
+
+	/* poll until phase is zero */
+	ret = wait_for_bit_le32(reg_address, mask, false, 20000, false);
+	if (ret)
+		return ret;
+
+	writel(value, reg_address);
+
+	return wait_for_bit_le32(reg_address, mask, false, 20000, false);
+}
+
+/*
+ * Setup clocks while making no assumptions about previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ * Put all plls in bypass
+ * Put all plls VCO registers back to reset value (bandgap power down).
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ * Delay 5 us.
+ * Deassert bandgap power down and set numerator and denominator
+ * Start 7 us timer.
+ * set internal dividers
+ * Wait for 7 us timer.
+ * Enable plls
+ * Set external dividers while plls are locking
+ * Wait for pll lock
+ * Assert/deassert outreset all.
+ * Take all pll's out of bypass
+ * Clear safe mode
+ * set source main and peripheral clocks
+ * Ungate clocks
+ */
+
+int cm_basic_init(const struct cm_config * const cfg)
+{
+	unsigned long end;
+	int ret;
+
+	/* Start by being paranoid and gate all sw managed clocks */
+
+	/*
+	 * We need to disable nandclk
+	 * and then do another apb access before disabling
+	 * gatting off the rest of the periperal clocks.
+	 */
+	writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
+		readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_EN),
+		socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_EN);
+
+	/* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
+	writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
+		socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_EN);
+
+	writel(0, socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_EN);
+
+	/* now we can gate off the rest of the peripheral clocks */
+	writel(0, socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_EN);
+
+	/* Put all plls in bypass */
+	cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
+			CLKMGR_BYPASS_MAINPLL);
+
+	/* Put all plls VCO registers back to reset value. */
+	writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
+	       ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_VCO);
+	writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
+	       ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_VCO);
+	writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
+	       ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_VCO);
+
+	/*
+	 * The clocks to the flash devices and the L4_MAIN clocks can
+	 * glitch when coming out of safe mode if their source values
+	 * are different from their reset value.  So the trick it to
+	 * put them back to their reset state, and change input
+	 * after exiting safe mode but before ungating the clocks.
+	 */
+	writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
+		      socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_SRC);
+	writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
+		      socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_L4SRC);
+
+	/* read back for the required 5 us delay. */
+	readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_VCO);
+	readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_VCO);
+	readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_VCO);
+
+
+	/*
+	 * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
+	 * with numerator and denominator.
+	 */
+	writel(cfg->main_vco_base,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_VCO);
+	writel(cfg->peri_vco_base,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_VCO);
+	writel(cfg->sdram_vco_base,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_VCO);
+
+	/*
+	 * Time starts here. Must wait 7 us from
+	 * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
+	 */
+	end = timer_get_us() + 7;
+
+	/* main mpu */
+	writel(cfg->mpuclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_MPUCLK);
+
+	/* altera group mpuclk */
+	writel(cfg->altera_grp_mpuclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_ALTR_MPUCLK);
+
+	/* main main clock */
+	writel(cfg->mainclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_MAINCLK);
+
+	/* main for dbg */
+	writel(cfg->dbgatclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_DBGATCLK);
+
+	/* main for cfgs2fuser0clk */
+	writel(cfg->cfg2fuser0clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_CFGS2FUSER0CLK);
+
+	/* Peri emac0 50 MHz default to RMII */
+	writel(cfg->emac0clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_EMAC0CLK);
+
+	/* Peri emac1 50 MHz default to RMII */
+	writel(cfg->emac1clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_EMAC1CLK);
+
+	/* Peri QSPI */
+	writel(cfg->mainqspiclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_MAINQSPICLK);
+
+	writel(cfg->perqspiclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_PERQSPICLK);
+
+	/* Peri pernandsdmmcclk */
+	writel(cfg->mainnandsdmmcclk,
+	       socfpga_get_clkmgr_addr() +
+	       CLKMGR_GEN5_MAINPLL_MAINNANDSDMMCCLK);
+
+	writel(cfg->pernandsdmmcclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_PERNANDSDMMCCLK);
+
+	/* Peri perbaseclk */
+	writel(cfg->perbaseclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_PERBASECLK);
+
+	/* Peri s2fuser1clk */
+	writel(cfg->s2fuser1clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_S2FUSER1CLK);
+
+	/* 7 us must have elapsed before we can enable the VCO */
+	while (timer_get_us() < end)
+		;
+
+	/* Enable vco */
+	/* main pll vco */
+	writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_VCO);
+
+	/* periferal pll */
+	writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_VCO);
+
+	/* sdram pll vco */
+	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_VCO);
+
+	/* L3 MP and L3 SP */
+	writel(cfg->maindiv,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_MAINDIV);
+
+	writel(cfg->dbgdiv,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_DBGDIV);
+
+	writel(cfg->tracediv,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_TRACEDIV);
+
+	/* L4 MP, L4 SP, can0, and can1 */
+	writel(cfg->perdiv,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_DIV);
+
+	writel(cfg->gpiodiv,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_GPIODIV);
+
+	cm_wait_for_lock(LOCKED_MASK);
+
+	/* write the sdram clock counters before toggling outreset all */
+	writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_DDRDQSCLK);
+
+	writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_DDR2XDQSCLK);
+
+	writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_DDRDQCLK);
+
+	writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_S2FUSER2CLK);
+
+	/*
+	 * after locking, but before taking out of bypass
+	 * assert/deassert outresetall
+	 */
+	u32 mainvco = readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_GEN5_MAINPLL_VCO);
+
+	/* assert main outresetall */
+	writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_VCO);
+
+	u32 periphvco = readl(socfpga_get_clkmgr_addr() +
+			      CLKMGR_GEN5_PERPLL_VCO);
+
+	/* assert pheriph outresetall */
+	writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_VCO);
+
+	/* assert sdram outresetall */
+	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN |
+	       CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_VCO);
+
+	/* deassert main outresetall */
+	writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_VCO);
+
+	/* deassert pheriph outresetall */
+	writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_VCO);
+
+	/* deassert sdram outresetall */
+	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_VCO);
+
+	/*
+	 * now that we've toggled outreset all, all the clocks
+	 * are aligned nicely; so we can change any phase.
+	 */
+	ret = cm_write_with_phase(cfg->ddrdqsclk,
+				  (const void *)(socfpga_get_clkmgr_addr() +
+				  CLKMGR_GEN5_SDRPLL_DDRDQSCLK),
+				  CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
+	if (ret)
+		return ret;
+
+	/* SDRAM DDR2XDQSCLK */
+	ret = cm_write_with_phase(cfg->ddr2xdqsclk,
+				  (const void *)(socfpga_get_clkmgr_addr() +
+				  CLKMGR_GEN5_SDRPLL_DDR2XDQSCLK),
+				  CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
+	if (ret)
+		return ret;
+
+	ret = cm_write_with_phase(cfg->ddrdqclk,
+				  (const void *)(socfpga_get_clkmgr_addr() +
+				  CLKMGR_GEN5_SDRPLL_DDRDQCLK),
+				  CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
+	if (ret)
+		return ret;
+
+	ret = cm_write_with_phase(cfg->s2fuser2clk,
+				  (const void *)(socfpga_get_clkmgr_addr() +
+				  CLKMGR_GEN5_SDRPLL_S2FUSER2CLK),
+				  CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
+	if (ret)
+		return ret;
+
+	/* Take all three PLLs out of bypass when safe mode is cleared. */
+	cm_write_bypass(0);
+
+	/* clear safe mode */
+	cm_write_ctrl(readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_CTRL) |
+		      CLKMGR_CTRL_SAFEMODE);
+
+	/*
+	 * now that safe mode is clear with clocks gated
+	 * it safe to change the source mux for the flashes the the L4_MAIN
+	 */
+	writel(cfg->persrc,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_SRC);
+	writel(cfg->l4src,
+	       socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_L4SRC);
+
+	/* Now ungate non-hw-managed clocks */
+	writel(~0, socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_EN);
+	writel(~0, socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_EN);
+	writel(~0, socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_EN);
+
+	/* Clear the loss of lock bits (write 1 to clear) */
+	writel(CLKMGR_INTER_SDRPLLLOST_MASK |
+		      CLKMGR_INTER_PERPLLLOST_MASK |
+		      CLKMGR_INTER_MAINPLLLOST_MASK,
+		      socfpga_get_clkmgr_addr() + CLKMGR_GEN5_INTER);
+
+	return 0;
+}
+
+static unsigned int cm_get_main_vco_clk_hz(void)
+{
+	u32 reg, clock;
+
+	/* get the main VCO clock */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_VCO);
+	clock = cm_get_osc_clk_hz(1);
+	clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
+		  CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
+	clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
+		  CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+	return clock;
+}
+
+static unsigned int cm_get_per_vco_clk_hz(void)
+{
+	u32 reg, clock = 0;
+
+	/* identify PER PLL clock source */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_VCO);
+	reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
+	      CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
+	if (reg == CLKMGR_VCO_SSRC_EOSC1)
+		clock = cm_get_osc_clk_hz(1);
+	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
+		clock = cm_get_osc_clk_hz(2);
+	else if (reg == CLKMGR_VCO_SSRC_F2S)
+		clock = cm_get_f2s_per_ref_clk_hz();
+
+	/* get the PER VCO clock */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_VCO);
+	clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
+		  CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
+	clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
+		  CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+	return clock;
+}
+
+unsigned long cm_get_mpu_clk_hz(void)
+{
+	u32 reg, clock;
+
+	clock = cm_get_main_vco_clk_hz();
+
+	/* get the MPU clock */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_ALTR_MPUCLK);
+	clock /= (reg + 1);
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_MPUCLK);
+	clock /= (reg + 1);
+	return clock;
+}
+
+unsigned long cm_get_sdram_clk_hz(void)
+{
+	u32 reg, clock = 0;
+
+	/* identify SDRAM PLL clock source */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_VCO);
+	reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
+	      CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
+	if (reg == CLKMGR_VCO_SSRC_EOSC1)
+		clock = cm_get_osc_clk_hz(1);
+	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
+		clock = cm_get_osc_clk_hz(2);
+	else if (reg == CLKMGR_VCO_SSRC_F2S)
+		clock = cm_get_f2s_sdr_ref_clk_hz();
+
+	/* get the SDRAM VCO clock */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_VCO);
+	clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
+		  CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
+	clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
+		  CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+	/* get the SDRAM (DDR_DQS) clock */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_SDRPLL_DDRDQSCLK);
+	reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
+	      CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
+	clock /= (reg + 1);
+
+	return clock;
+}
+
+unsigned int cm_get_l4_sp_clk_hz(void)
+{
+	u32 reg, clock = 0;
+
+	/* identify the source of L4 SP clock */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_L4SRC);
+	reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
+	      CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
+
+	if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
+		clock = cm_get_main_vco_clk_hz();
+
+		/* get the clock prior L4 SP divider (main clk) */
+		reg = readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_GEN5_ALTR_MAINCLK);
+		clock /= (reg + 1);
+		reg = readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_GEN5_MAINPLL_MAINCLK);
+		clock /= (reg + 1);
+	} else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
+		clock = cm_get_per_vco_clk_hz();
+
+		/* get the clock prior L4 SP divider (periph_base_clk) */
+		reg = readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_GEN5_PERPLL_PERBASECLK);
+		clock /= (reg + 1);
+	}
+
+	/* get the L4 SP clock which supplied to UART */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_MAINPLL_MAINDIV);
+	reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
+	      CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
+	clock = clock / (1 << reg);
+
+	return clock;
+}
+
+unsigned int cm_get_mmc_controller_clk_hz(void)
+{
+	u32 reg, clock = 0;
+
+	/* identify the source of MMC clock */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_SRC);
+	reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
+	      CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
+
+	if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
+		clock = cm_get_f2s_per_ref_clk_hz();
+	} else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
+		clock = cm_get_main_vco_clk_hz();
+
+		/* get the SDMMC clock */
+		reg = readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_GEN5_MAINPLL_MAINNANDSDMMCCLK);
+		clock /= (reg + 1);
+	} else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
+		clock = cm_get_per_vco_clk_hz();
+
+		/* get the SDMMC clock */
+		reg = readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_GEN5_PERPLL_PERNANDSDMMCCLK);
+		clock /= (reg + 1);
+	}
+
+	/* further divide by 4 as we have fixed divider at wrapper */
+	clock /= 4;
+	return clock;
+}
+
+unsigned int cm_get_qspi_controller_clk_hz(void)
+{
+	u32 reg, clock = 0;
+
+	/* identify the source of QSPI clock */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_SRC);
+	reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
+	      CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
+
+	if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
+		clock = cm_get_f2s_per_ref_clk_hz();
+	} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
+		clock = cm_get_main_vco_clk_hz();
+
+		/* get the qspi clock */
+		reg = readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_GEN5_MAINPLL_MAINQSPICLK);
+		clock /= (reg + 1);
+	} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
+		clock = cm_get_per_vco_clk_hz();
+
+		/* get the qspi clock */
+		reg = readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_GEN5_PERPLL_PERQSPICLK);
+		clock /= (reg + 1);
+	}
+
+	return clock;
+}
+
+unsigned int cm_get_spi_controller_clk_hz(void)
+{
+	u32 reg, clock = 0;
+
+	clock = cm_get_per_vco_clk_hz();
+
+	/* get the clock prior L4 SP divider (periph_base_clk) */
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_GEN5_PERPLL_PERBASECLK);
+	clock /= (reg + 1);
+
+	return clock;
+}
+
+/* Override weak dw_spi_get_clk implementation in designware_spi.c driver */
+int dw_spi_get_clk(struct udevice *bus, ulong *rate)
+{
+	*rate = cm_get_spi_controller_clk_hz();
+
+	return 0;
+}
+
+void cm_print_clock_quick_summary(void)
+{
+	printf("MPU       %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
+	printf("DDR       %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
+	printf("EOSC1       %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
+	printf("EOSC2       %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
+	printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
+	printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
+	printf("MMC         %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
+	printf("QSPI        %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
+	printf("UART        %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
+	printf("SPI         %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/clock_manager_s10.c b/roms/u-boot/arch/arm/mach-socfpga/clock_manager_s10.c
new file mode 100644
index 000000000..4b4f0749d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/clock_manager_s10.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/handoff_soc64.h>
+#include <asm/arch/system_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * function to write the bypass register which requires a poll of the
+ * busy bit
+ */
+static void cm_write_bypass_mainpll(u32 val)
+{
+	writel(val, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_BYPASS);
+	cm_wait_for_fsm();
+}
+
+static void cm_write_bypass_perpll(u32 val)
+{
+	writel(val, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_BYPASS);
+	cm_wait_for_fsm();
+}
+
+/* function to write the ctrl register which requires a poll of the busy bit */
+static void cm_write_ctrl(u32 val)
+{
+	writel(val, socfpga_get_clkmgr_addr() + CLKMGR_S10_CTRL);
+	cm_wait_for_fsm();
+}
+
+/*
+ * Setup clocks while making no assumptions about previous state of the clocks.
+ */
+void cm_basic_init(const struct cm_config * const cfg)
+{
+	u32 mdiv, refclkdiv, mscnt, hscnt, vcocalib;
+
+	if (cfg == 0)
+		return;
+
+	/* Put all plls in bypass */
+	cm_write_bypass_mainpll(CLKMGR_BYPASS_MAINPLL_ALL);
+	cm_write_bypass_perpll(CLKMGR_BYPASS_PERPLL_ALL);
+
+	/* setup main PLL dividers where calculate the vcocalib value */
+	mdiv = (cfg->main_pll_fdbck >> CLKMGR_FDBCK_MDIV_OFFSET) &
+		CLKMGR_FDBCK_MDIV_MASK;
+	refclkdiv = (cfg->main_pll_pllglob >> CLKMGR_PLLGLOB_REFCLKDIV_OFFSET) &
+		     CLKMGR_PLLGLOB_REFCLKDIV_MASK;
+	mscnt = CLKMGR_MSCNT_CONST / (CLKMGR_MDIV_CONST + mdiv) / refclkdiv;
+	hscnt = (mdiv + CLKMGR_MDIV_CONST) * mscnt / refclkdiv -
+		CLKMGR_HSCNT_CONST;
+	vcocalib = (hscnt & CLKMGR_VCOCALIB_HSCNT_MASK) |
+		   ((mscnt & CLKMGR_VCOCALIB_MSCNT_MASK) <<
+		   CLKMGR_VCOCALIB_MSCNT_OFFSET);
+
+	writel((cfg->main_pll_pllglob & ~CLKMGR_PLLGLOB_PD_MASK &
+		~CLKMGR_PLLGLOB_RST_MASK),
+		socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_PLLGLOB);
+	writel(cfg->main_pll_fdbck,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_FDBCK);
+	writel(vcocalib,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_VCOCALIB);
+	writel(cfg->main_pll_pllc0,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_PLLC0);
+	writel(cfg->main_pll_pllc1,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_PLLC1);
+	writel(cfg->main_pll_nocdiv,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_NOCDIV);
+
+	/* setup peripheral PLL dividers */
+	/* calculate the vcocalib value */
+	mdiv = (cfg->per_pll_fdbck >> CLKMGR_FDBCK_MDIV_OFFSET) &
+		CLKMGR_FDBCK_MDIV_MASK;
+	refclkdiv = (cfg->per_pll_pllglob >> CLKMGR_PLLGLOB_REFCLKDIV_OFFSET) &
+		     CLKMGR_PLLGLOB_REFCLKDIV_MASK;
+	mscnt = CLKMGR_MSCNT_CONST / (CLKMGR_MDIV_CONST + mdiv) / refclkdiv;
+	hscnt = (mdiv + CLKMGR_MDIV_CONST) * mscnt / refclkdiv -
+		CLKMGR_HSCNT_CONST;
+	vcocalib = (hscnt & CLKMGR_VCOCALIB_HSCNT_MASK) |
+		   ((mscnt & CLKMGR_VCOCALIB_MSCNT_MASK) <<
+		   CLKMGR_VCOCALIB_MSCNT_OFFSET);
+
+	writel((cfg->per_pll_pllglob & ~CLKMGR_PLLGLOB_PD_MASK &
+		~CLKMGR_PLLGLOB_RST_MASK),
+		socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_PLLGLOB);
+	writel(cfg->per_pll_fdbck,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_FDBCK);
+	writel(vcocalib,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_VCOCALIB);
+	writel(cfg->per_pll_pllc0,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_PLLC0);
+	writel(cfg->per_pll_pllc1,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_PLLC1);
+	writel(cfg->per_pll_emacctl,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_EMACCTL);
+	writel(cfg->per_pll_gpiodiv,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_GPIODIV);
+
+	/* Take both PLL out of reset and power up */
+	setbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_PLLGLOB,
+		     CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK);
+	setbits_le32(socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_PLLGLOB,
+		     CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK);
+
+#define LOCKED_MASK \
+	(CLKMGR_STAT_MAINPLL_LOCKED | \
+	CLKMGR_STAT_PERPLL_LOCKED)
+
+	cm_wait_for_lock(LOCKED_MASK);
+
+	/*
+	 * Dividers for C2 to C9 only init after PLLs are lock. As dividers
+	 * only take effect upon value change, we shall set a maximum value as
+	 * default value.
+	 */
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_MPUCLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_NOCCLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR2CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR3CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR4CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR5CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR6CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR7CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR8CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR9CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR2CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR3CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR4CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR5CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR6CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR7CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR8CLK);
+	writel(0xff, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR9CLK);
+
+	writel(cfg->main_pll_mpuclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_MPUCLK);
+	writel(cfg->main_pll_nocclk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_NOCCLK);
+	writel(cfg->main_pll_cntr2clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR2CLK);
+	writel(cfg->main_pll_cntr3clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR3CLK);
+	writel(cfg->main_pll_cntr4clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR4CLK);
+	writel(cfg->main_pll_cntr5clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR5CLK);
+	writel(cfg->main_pll_cntr6clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR6CLK);
+	writel(cfg->main_pll_cntr7clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR7CLK);
+	writel(cfg->main_pll_cntr8clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR8CLK);
+	writel(cfg->main_pll_cntr9clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_CNTR9CLK);
+	writel(cfg->per_pll_cntr2clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR2CLK);
+	writel(cfg->per_pll_cntr3clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR3CLK);
+	writel(cfg->per_pll_cntr4clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR4CLK);
+	writel(cfg->per_pll_cntr5clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR5CLK);
+	writel(cfg->per_pll_cntr6clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR6CLK);
+	writel(cfg->per_pll_cntr7clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR7CLK);
+	writel(cfg->per_pll_cntr8clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR8CLK);
+	writel(cfg->per_pll_cntr9clk,
+	       socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_CNTR9CLK);
+
+	/* Take all PLLs out of bypass */
+	cm_write_bypass_mainpll(0);
+	cm_write_bypass_perpll(0);
+
+	/* clear safe mode / out of boot mode */
+	cm_write_ctrl(readl(socfpga_get_clkmgr_addr() + CLKMGR_S10_CTRL) &
+		      ~(CLKMGR_CTRL_SAFEMODE));
+
+	/* Now ungate non-hw-managed clocks */
+	writel(~0, socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_EN);
+	writel(~0, socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_EN);
+
+	/* Clear the loss of lock bits (write 1 to clear) */
+	writel(CLKMGR_INTER_PERPLLLOST_MASK |
+		      CLKMGR_INTER_MAINPLLLOST_MASK,
+		      socfpga_get_clkmgr_addr() + CLKMGR_S10_INTRCLR);
+}
+
+static unsigned long cm_get_main_vco_clk_hz(void)
+{
+	 unsigned long fref, refdiv, mdiv, reg, vco;
+
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_PLLGLOB);
+
+	fref = (reg >> CLKMGR_PLLGLOB_VCO_PSRC_OFFSET) &
+		CLKMGR_PLLGLOB_VCO_PSRC_MASK;
+	switch (fref) {
+	case CLKMGR_VCO_PSRC_EOSC1:
+		fref = cm_get_osc_clk_hz();
+		break;
+	case CLKMGR_VCO_PSRC_INTOSC:
+		fref = cm_get_intosc_clk_hz();
+		break;
+	case CLKMGR_VCO_PSRC_F2S:
+		fref = cm_get_fpga_clk_hz();
+		break;
+	}
+
+	refdiv = (reg >> CLKMGR_PLLGLOB_REFCLKDIV_OFFSET) &
+		  CLKMGR_PLLGLOB_REFCLKDIV_MASK;
+
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_S10_MAINPLL_FDBCK);
+	mdiv = (reg >> CLKMGR_FDBCK_MDIV_OFFSET) & CLKMGR_FDBCK_MDIV_MASK;
+
+	vco = fref / refdiv;
+	vco = vco * (CLKMGR_MDIV_CONST + mdiv);
+	return vco;
+}
+
+static unsigned long cm_get_per_vco_clk_hz(void)
+{
+	unsigned long fref, refdiv, mdiv, reg, vco;
+
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_PLLGLOB);
+
+	fref = (reg >> CLKMGR_PLLGLOB_VCO_PSRC_OFFSET) &
+		CLKMGR_PLLGLOB_VCO_PSRC_MASK;
+	switch (fref) {
+	case CLKMGR_VCO_PSRC_EOSC1:
+		fref = cm_get_osc_clk_hz();
+		break;
+	case CLKMGR_VCO_PSRC_INTOSC:
+		fref = cm_get_intosc_clk_hz();
+		break;
+	case CLKMGR_VCO_PSRC_F2S:
+		fref = cm_get_fpga_clk_hz();
+		break;
+	}
+
+	refdiv = (reg >> CLKMGR_PLLGLOB_REFCLKDIV_OFFSET) &
+		  CLKMGR_PLLGLOB_REFCLKDIV_MASK;
+
+	reg = readl(socfpga_get_clkmgr_addr() + CLKMGR_S10_PERPLL_FDBCK);
+	mdiv = (reg >> CLKMGR_FDBCK_MDIV_OFFSET) & CLKMGR_FDBCK_MDIV_MASK;
+
+	vco = fref / refdiv;
+	vco = vco * (CLKMGR_MDIV_CONST + mdiv);
+	return vco;
+}
+
+unsigned long cm_get_mpu_clk_hz(void)
+{
+	unsigned long clock = readl(socfpga_get_clkmgr_addr() +
+				    CLKMGR_S10_MAINPLL_MPUCLK);
+
+	clock = (clock >> CLKMGR_CLKSRC_OFFSET) & CLKMGR_CLKSRC_MASK;
+
+	switch (clock) {
+	case CLKMGR_CLKSRC_MAIN:
+		clock = cm_get_main_vco_clk_hz();
+		clock /= (readl(socfpga_get_clkmgr_addr() +
+				CLKMGR_S10_MAINPLL_PLLC0) &
+			  CLKMGR_PLLC0_DIV_MASK);
+		break;
+
+	case CLKMGR_CLKSRC_PER:
+		clock = cm_get_per_vco_clk_hz();
+		clock /= (readl(socfpga_get_clkmgr_addr() +
+				CLKMGR_S10_PERPLL_PLLC0) &
+			  CLKMGR_CLKCNT_MSK);
+		break;
+
+	case CLKMGR_CLKSRC_OSC1:
+		clock = cm_get_osc_clk_hz();
+		break;
+
+	case CLKMGR_CLKSRC_INTOSC:
+		clock = cm_get_intosc_clk_hz();
+		break;
+
+	case CLKMGR_CLKSRC_FPGA:
+		clock = cm_get_fpga_clk_hz();
+		break;
+	}
+
+	clock /= 1 + (readl(socfpga_get_clkmgr_addr() +
+			    CLKMGR_S10_MAINPLL_MPUCLK) & CLKMGR_CLKCNT_MSK);
+	return clock;
+}
+
+unsigned int cm_get_l3_main_clk_hz(void)
+{
+	u32 clock = readl(socfpga_get_clkmgr_addr() +
+			  CLKMGR_S10_MAINPLL_NOCCLK);
+
+	clock = (clock >> CLKMGR_CLKSRC_OFFSET) & CLKMGR_CLKSRC_MASK;
+
+	switch (clock) {
+	case CLKMGR_CLKSRC_MAIN:
+		clock = cm_get_main_vco_clk_hz();
+		clock /= (readl(socfpga_get_clkmgr_addr() +
+				CLKMGR_S10_MAINPLL_PLLC1) &
+			  CLKMGR_PLLC0_DIV_MASK);
+		break;
+
+	case CLKMGR_CLKSRC_PER:
+		clock = cm_get_per_vco_clk_hz();
+		clock /= (readl(socfpga_get_clkmgr_addr() +
+			  CLKMGR_S10_PERPLL_PLLC1) & CLKMGR_CLKCNT_MSK);
+		break;
+
+	case CLKMGR_CLKSRC_OSC1:
+		clock = cm_get_osc_clk_hz();
+		break;
+
+	case CLKMGR_CLKSRC_INTOSC:
+		clock = cm_get_intosc_clk_hz();
+		break;
+
+	case CLKMGR_CLKSRC_FPGA:
+		clock = cm_get_fpga_clk_hz();
+		break;
+	}
+
+	clock /= 1 + (readl(socfpga_get_clkmgr_addr() +
+		      CLKMGR_S10_MAINPLL_NOCCLK) & CLKMGR_CLKCNT_MSK);
+	return clock;
+}
+
+unsigned int cm_get_mmc_controller_clk_hz(void)
+{
+	u32 clock = readl(socfpga_get_clkmgr_addr() +
+			  CLKMGR_S10_PERPLL_CNTR6CLK);
+
+	clock = (clock >> CLKMGR_CLKSRC_OFFSET) & CLKMGR_CLKSRC_MASK;
+
+	switch (clock) {
+	case CLKMGR_CLKSRC_MAIN:
+		clock = cm_get_l3_main_clk_hz();
+		clock /= 1 + (readl(socfpga_get_clkmgr_addr() +
+				    CLKMGR_S10_MAINPLL_CNTR6CLK) &
+			      CLKMGR_CLKCNT_MSK);
+		break;
+
+	case CLKMGR_CLKSRC_PER:
+		clock = cm_get_l3_main_clk_hz();
+		clock /= 1 + (readl(socfpga_get_clkmgr_addr() +
+				    CLKMGR_S10_PERPLL_CNTR6CLK) &
+			      CLKMGR_CLKCNT_MSK);
+		break;
+
+	case CLKMGR_CLKSRC_OSC1:
+		clock = cm_get_osc_clk_hz();
+		break;
+
+	case CLKMGR_CLKSRC_INTOSC:
+		clock = cm_get_intosc_clk_hz();
+		break;
+
+	case CLKMGR_CLKSRC_FPGA:
+		clock = cm_get_fpga_clk_hz();
+		break;
+	}
+	return clock / 4;
+}
+
+unsigned int cm_get_l4_sp_clk_hz(void)
+{
+	u32 clock = cm_get_l3_main_clk_hz();
+
+	clock /= (1 << ((readl(socfpga_get_clkmgr_addr() +
+			       CLKMGR_S10_MAINPLL_NOCDIV) >>
+			 CLKMGR_NOCDIV_L4SPCLK_OFFSET) & CLKMGR_CLKCNT_MSK));
+	return clock;
+}
+
+unsigned int cm_get_spi_controller_clk_hz(void)
+{
+	u32 clock = cm_get_l3_main_clk_hz();
+
+	clock /= (1 << ((readl(socfpga_get_clkmgr_addr() +
+			       CLKMGR_S10_MAINPLL_NOCDIV) >>
+			 CLKMGR_NOCDIV_L4MAIN_OFFSET) & CLKMGR_CLKCNT_MSK));
+	return clock;
+}
+
+unsigned int cm_get_l4_sys_free_clk_hz(void)
+{
+	return cm_get_l3_main_clk_hz() / 4;
+}
+
+void cm_print_clock_quick_summary(void)
+{
+	printf("MPU         %d kHz\n", (u32)(cm_get_mpu_clk_hz() / 1000));
+	printf("L3 main     %d kHz\n", cm_get_l3_main_clk_hz() / 1000);
+	printf("Main VCO    %d kHz\n", (u32)(cm_get_main_vco_clk_hz() / 1000));
+	printf("Per VCO     %d kHz\n", (u32)(cm_get_per_vco_clk_hz() / 1000));
+	printf("EOSC1       %d kHz\n", cm_get_osc_clk_hz() / 1000);
+	printf("HPS MMC     %d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
+	printf("UART        %d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/firewall.c b/roms/u-boot/arch/arm/mach-socfpga/firewall.c
new file mode 100644
index 000000000..69229dc65
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/firewall.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2019 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <asm/arch/firewall.h>
+#include <asm/arch/system_manager.h>
+
+static void firewall_l4_per_disable(void)
+{
+	const struct socfpga_firwall_l4_per *firwall_l4_per_base =
+		(struct socfpga_firwall_l4_per *)SOCFPGA_FIREWALL_L4_PER;
+	u32 i;
+	const u32 *addr[] = {
+			&firwall_l4_per_base->nand,
+			&firwall_l4_per_base->nand_data,
+			&firwall_l4_per_base->usb0,
+			&firwall_l4_per_base->usb1,
+			&firwall_l4_per_base->spim0,
+			&firwall_l4_per_base->spim1,
+			&firwall_l4_per_base->emac0,
+			&firwall_l4_per_base->emac1,
+			&firwall_l4_per_base->emac2,
+			&firwall_l4_per_base->sdmmc,
+			&firwall_l4_per_base->gpio0,
+			&firwall_l4_per_base->gpio1,
+			&firwall_l4_per_base->i2c0,
+			&firwall_l4_per_base->i2c1,
+			&firwall_l4_per_base->i2c2,
+			&firwall_l4_per_base->i2c3,
+			&firwall_l4_per_base->i2c4,
+			&firwall_l4_per_base->timer0,
+			&firwall_l4_per_base->timer1,
+			&firwall_l4_per_base->uart0,
+			&firwall_l4_per_base->uart1
+			};
+
+	/*
+	 * The following lines of code will enable non-secure access
+	 * to nand, usb, spi, emac, sdmmc, gpio, i2c, timers and uart. This
+	 * is needed as most OS run in non-secure mode. Thus we need to
+	 * enable non-secure access to these peripherals in order for the
+	 * OS to use these peripherals.
+	 */
+	for (i = 0; i < ARRAY_SIZE(addr); i++)
+		writel(FIREWALL_L4_DISABLE_ALL, addr[i]);
+}
+
+static void firewall_l4_sys_disable(void)
+{
+	const struct socfpga_firwall_l4_sys *firwall_l4_sys_base =
+		(struct socfpga_firwall_l4_sys *)SOCFPGA_FIREWALL_L4_SYS;
+	u32 i;
+	const u32 *addr[] = {
+			&firwall_l4_sys_base->dma_ecc,
+			&firwall_l4_sys_base->emac0rx_ecc,
+			&firwall_l4_sys_base->emac0tx_ecc,
+			&firwall_l4_sys_base->emac1rx_ecc,
+			&firwall_l4_sys_base->emac1tx_ecc,
+			&firwall_l4_sys_base->emac2rx_ecc,
+			&firwall_l4_sys_base->emac2tx_ecc,
+			&firwall_l4_sys_base->nand_ecc,
+			&firwall_l4_sys_base->nand_read_ecc,
+			&firwall_l4_sys_base->nand_write_ecc,
+			&firwall_l4_sys_base->ocram_ecc,
+			&firwall_l4_sys_base->sdmmc_ecc,
+			&firwall_l4_sys_base->usb0_ecc,
+			&firwall_l4_sys_base->usb1_ecc,
+			&firwall_l4_sys_base->clock_manager,
+			&firwall_l4_sys_base->io_manager,
+			&firwall_l4_sys_base->reset_manager,
+			&firwall_l4_sys_base->system_manager,
+			&firwall_l4_sys_base->watchdog0,
+			&firwall_l4_sys_base->watchdog1,
+			&firwall_l4_sys_base->watchdog2,
+			&firwall_l4_sys_base->watchdog3
+		};
+
+	for (i = 0; i < ARRAY_SIZE(addr); i++)
+		writel(FIREWALL_L4_DISABLE_ALL, addr[i]);
+}
+
+static void firewall_bridge_disable(void)
+{
+	/* disable lwsocf2fpga and soc2fpga bridge security */
+	writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_SOC2FPGA);
+	writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_LWSOC2FPGA);
+}
+
+void firewall_setup(void)
+{
+	firewall_l4_per_disable();
+	firewall_l4_sys_disable();
+	firewall_bridge_disable();
+
+	/* disable SMMU security */
+	writel(FIREWALL_L4_DISABLE_ALL, SOCFPGA_FIREWALL_TCU);
+
+	/* enable non-secure interface to DMA330 DMA and peripherals */
+	writel(SYSMGR_DMA_IRQ_NS | SYSMGR_DMA_MGR_NS,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_DMA);
+	writel(SYSMGR_DMAPERIPH_ALL_NS,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_DMA_PERIPH);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/fpga_manager.c b/roms/u-boot/arch/arm/mach-socfpga/fpga_manager.c
new file mode 100644
index 000000000..18d692c63
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/fpga_manager.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * All rights reserved.
+ *
+ * This file contains only support functions used also by the SoCFPGA
+ * platform code, the real meat is located in drivers/fpga/socfpga.c .
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+
+/* Timeout count */
+#define FPGA_TIMEOUT_CNT		0x1000000
+
+static struct socfpga_fpga_manager *fpgamgr_regs =
+	(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
+
+/* Check whether FPGA Init_Done signal is high */
+static int is_fpgamgr_initdone_high(void)
+{
+	unsigned long val;
+
+	val = readl(&fpgamgr_regs->gpio_ext_porta);
+	return val & FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK;
+}
+
+/* Get the FPGA mode */
+int fpgamgr_get_mode(void)
+{
+	unsigned long val;
+
+	val = readl(&fpgamgr_regs->stat);
+	return val & FPGAMGRREGS_STAT_MODE_MASK;
+}
+
+/* Check whether FPGA is ready to be accessed */
+int fpgamgr_test_fpga_ready(void)
+{
+	/* Check for init done signal */
+	if (!is_fpgamgr_initdone_high())
+		return 0;
+
+	/* Check again to avoid false glitches */
+	if (!is_fpgamgr_initdone_high())
+		return 0;
+
+	if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_USERMODE)
+		return 0;
+
+	return 1;
+}
+
+/* Poll until FPGA is ready to be accessed or timeout occurred */
+int fpgamgr_poll_fpga_ready(void)
+{
+	unsigned long i;
+
+	/* If FPGA is blank, wait till WD invoke warm reset */
+	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
+		/* check for init done signal */
+		if (!is_fpgamgr_initdone_high())
+			continue;
+		/* check again to avoid false glitches */
+		if (!is_fpgamgr_initdone_high())
+			continue;
+		return 1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/freeze_controller.c b/roms/u-boot/arch/arm/mach-socfpga/freeze_controller.c
new file mode 100644
index 000000000..561d3408c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/freeze_controller.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/freeze_controller.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+
+static const struct socfpga_freeze_controller *freeze_controller_base =
+		(void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
+
+/*
+ * Default state from cold reset is FREEZE_ALL; the global
+ * flag is set to TRUE to indicate the IO banks are frozen
+ */
+static uint32_t frzctrl_channel_freeze[FREEZE_CHANNEL_NUM]
+	= { FREEZE_CTRL_FROZEN, FREEZE_CTRL_FROZEN,
+	FREEZE_CTRL_FROZEN, FREEZE_CTRL_FROZEN};
+
+/* Freeze HPS IOs */
+void sys_mgr_frzctrl_freeze_req(void)
+{
+	u32 ioctrl_reg_offset;
+	u32 reg_value;
+	u32 reg_cfg_mask;
+	u32 channel_id;
+
+	/* select software FSM */
+	writel(SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW,	&freeze_controller_base->src);
+
+	/* Freeze channel 0 to 2 */
+	for (channel_id = 0; channel_id <= 2; channel_id++) {
+		ioctrl_reg_offset = (u32)(
+			&freeze_controller_base->vioctrl + channel_id);
+
+		/*
+		 * Assert active low enrnsl, plniotri
+		 * and niotri signals
+		 */
+		reg_cfg_mask =
+			SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK;
+		clrbits_le32(ioctrl_reg_offset,	reg_cfg_mask);
+
+		/*
+		 * Note: Delay for 20ns at min
+		 * Assert active low bhniotri signal and de-assert
+		 * active high csrdone
+		 */
+		reg_cfg_mask
+			= SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK;
+		clrbits_le32(ioctrl_reg_offset,	reg_cfg_mask);
+
+		/* Set global flag to indicate channel is frozen */
+		frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_FROZEN;
+	}
+
+	/* Freeze channel 3 */
+	/*
+	 * Assert active low enrnsl, plniotri and
+	 * niotri signals
+	 */
+	reg_cfg_mask
+		= SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK;
+	clrbits_le32(&freeze_controller_base->hioctrl, reg_cfg_mask);
+
+	/*
+	 * assert active low bhniotri & nfrzdrv signals,
+	 * de-assert active high csrdone and assert
+	 * active high frzreg and nfrzdrv signals
+	 */
+	reg_value = readl(&freeze_controller_base->hioctrl);
+	reg_cfg_mask
+		= SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK;
+	reg_value
+		= (reg_value & ~reg_cfg_mask)
+		| SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK;
+	writel(reg_value, &freeze_controller_base->hioctrl);
+
+	/*
+	 * assert active high reinit signal and de-assert
+	 * active high pllbiasen signals
+	 */
+	reg_value = readl(&freeze_controller_base->hioctrl);
+	reg_value
+		= (reg_value &
+		~SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK)
+		| SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK;
+	writel(reg_value, &freeze_controller_base->hioctrl);
+
+	/* Set global flag to indicate channel is frozen */
+	frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_FROZEN;
+}
+
+/* Unfreeze/Thaw HPS IOs */
+void sys_mgr_frzctrl_thaw_req(void)
+{
+	u32 ioctrl_reg_offset;
+	u32 reg_cfg_mask;
+	u32 reg_value;
+	u32 channel_id;
+	unsigned long eosc1_freq;
+
+	/* select software FSM */
+	writel(SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW,	&freeze_controller_base->src);
+
+	/* Thaw channel 0 to 2 */
+	for (channel_id = 0; channel_id <= 2; channel_id++) {
+		ioctrl_reg_offset
+			= (u32)(&freeze_controller_base->vioctrl + channel_id);
+
+		/*
+		 * Assert active low bhniotri signal and
+		 * de-assert active high csrdone
+		 */
+		reg_cfg_mask
+			= SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK;
+		setbits_le32(ioctrl_reg_offset,	reg_cfg_mask);
+
+		/*
+		 * Note: Delay for 20ns at min
+		 * de-assert active low plniotri and niotri signals
+		 */
+		reg_cfg_mask
+			= SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK;
+		setbits_le32(ioctrl_reg_offset,	reg_cfg_mask);
+
+		/*
+		 * Note: Delay for 20ns at min
+		 * de-assert active low enrnsl signal
+		 */
+		setbits_le32(ioctrl_reg_offset,
+			SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK);
+
+		/* Set global flag to indicate channel is thawed */
+		frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_THAWED;
+	}
+
+	/* Thaw channel 3 */
+	/* de-assert active high reinit signal */
+	clrbits_le32(&freeze_controller_base->hioctrl,
+		SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
+
+	/*
+	 * Note: Delay for 40ns at min
+	 * assert active high pllbiasen signals
+	 */
+	setbits_le32(&freeze_controller_base->hioctrl,
+		SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK);
+
+	/* Delay 1000 intosc cycles. The intosc is based on eosc1. */
+	eosc1_freq = cm_get_osc_clk_hz(1) / 1000;	/* kHz */
+	udelay(DIV_ROUND_UP(1000000, eosc1_freq));
+
+	/*
+	 * de-assert active low bhniotri signals,
+	 * assert active high csrdone and nfrzdrv signal
+	 */
+	reg_value = readl(&freeze_controller_base->hioctrl);
+	reg_value = (reg_value
+		| SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK)
+		& ~SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK;
+	writel(reg_value, &freeze_controller_base->hioctrl);
+
+	/*
+	 * Delay 33 intosc
+	 * Use worst case which is fatest eosc1=50MHz, delay required
+	 * is 1/50MHz * 33 = 660ns ~= 1us
+	 */
+	udelay(1);
+
+	/* de-assert active low plniotri and niotri signals */
+	reg_cfg_mask
+		= SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK;
+
+	setbits_le32(&freeze_controller_base->hioctrl, reg_cfg_mask);
+
+	/*
+	 * Note: Delay for 40ns at min
+	 * de-assert active high frzreg signal
+	 */
+	clrbits_le32(&freeze_controller_base->hioctrl,
+		SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK);
+
+	/*
+	 * Note: Delay for 40ns at min
+	 * de-assert active low enrnsl signal
+	 */
+	setbits_le32(&freeze_controller_base->hioctrl,
+		SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK);
+
+	/* Set global flag to indicate channel is thawed */
+	frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_THAWED;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_a10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
new file mode 100644
index 000000000..b947cc072
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014-2017 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _SOCFPGA_A10_BASE_HARDWARE_H_
+#define _SOCFPGA_A10_BASE_HARDWARE_H_
+
+#define SOCFPGA_EMAC0_ADDRESS			0xff800000
+#define SOCFPGA_EMAC1_ADDRESS			0xff802000
+#define SOCFPGA_EMAC2_ADDRESS			0xff804000
+#define SOCFPGA_SDMMC_ADDRESS			0xff808000
+#define SOCFPGA_QSPIREGS_ADDRESS		0xff809000
+#define SOCFPGA_QSPIDATA_ADDRESS		0xffa00000
+#define SOCFPGA_UART1_ADDRESS			0xffc02100
+#define SOCFPGA_HMC_MMR_IO48_ADDRESS		0xffcfa000
+#define SOCFPGA_FPGAMGRDATA_ADDRESS		0xffcfe400
+#define SOCFPGA_FPGAMGRREGS_ADDRESS		0xffd03000
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00200
+#define SOCFPGA_SYSMGR_ADDRESS			0xffd06000
+#define SOCFPGA_PINMUX_SHARED_3V_IO_ADDRESS	0xffd07000
+#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS	0xffd07200
+#define SOCFPGA_PINMUX_DEDICATED_IO_CFG_ADDRESS	0xffd07300
+#define SOCFPGA_PINMUX_FPGA_INTERFACE_ADDRESS	0xffd07400
+#define SOCFPGA_DMANONSECURE_ADDRESS		0xffda0000
+#define SOCFPGA_DMASECURE_ADDRESS		0xffda1000
+#define SOCFPGA_MPUSCU_ADDRESS			0xffffc000
+#define SOCFPGA_MPUL2_ADDRESS			0xfffff000
+#define SOCFPGA_I2C0_ADDRESS			0xffc02200
+#define SOCFPGA_I2C1_ADDRESS			0xffc02300
+#define SOCFPGA_I2C2_ADDRESS			0xffc02400
+#define SOCFPGA_I2C3_ADDRESS			0xffc02500
+#define SOCFPGA_I2C4_ADDRESS			0xffc02600
+
+#define SOCFPGA_ECC_OCRAM_ADDRESS		0xff8c3000
+#define SOCFPGA_UART0_ADDRESS			0xffc02000
+#define SOCFPGA_OSC1TIMER0_ADDRESS		0xffd00000
+#define SOCFPGA_OSC1TIMER1_ADDRESS		0xffd00100
+#define SOCFPGA_CLKMGR_ADDRESS			0xffd04000
+#define SOCFPGA_RSTMGR_ADDRESS			0xffd05000
+
+#define SOCFPGA_SDR_ADDRESS			0xffcfb000
+#define SOCFPGA_NOC_L4_PRIV_FLT_OFST		0xffd11000
+#define SOCFPGA_SDR_SCHEDULER_ADDRESS		0xffd12400
+#define SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS	0xffd13200
+#define SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS	0xffd13300
+#define SOCFPGA_SDR_FIREWALL_L3_ADDRESS		0xffd13400
+#define SOCFPGA_NOC_FW_H2F_SCR_OFST		0xffd13500
+
+#define SOCFPGA_PHYS_OCRAM_SIZE			0x40000
+
+#endif /* _SOCFPGA_A10_BASE_HARDWARE_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h
new file mode 100644
index 000000000..da966fb45
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _SOCFPGA_BASE_ADDRS_H_
+#define _SOCFPGA_BASE_ADDRS_H_
+
+#define SOCFPGA_FPGA_SLAVES_ADDRESS	0xc0000000
+#define SOCFPGA_STM_ADDRESS		0xfc000000
+#define SOCFPGA_DAP_ADDRESS		0xff000000
+#define SOCFPGA_EMAC0_ADDRESS		0xff700000
+#define SOCFPGA_EMAC1_ADDRESS		0xff702000
+#define SOCFPGA_SDMMC_ADDRESS		0xff704000
+#define SOCFPGA_QSPI_ADDRESS		0xff705000
+#define SOCFPGA_GPIO0_ADDRESS		0xff708000
+#define SOCFPGA_GPIO1_ADDRESS		0xff709000
+#define SOCFPGA_GPIO2_ADDRESS		0xff70a000
+#define SOCFPGA_L3REGS_ADDRESS		0xff800000
+#define SOCFPGA_USB0_ADDRESS		0xffb00000
+#define SOCFPGA_USB1_ADDRESS		0xffb40000
+#define SOCFPGA_CAN0_ADDRESS		0xffc00000
+#define SOCFPGA_CAN1_ADDRESS		0xffc01000
+#define SOCFPGA_UART0_ADDRESS		0xffc02000
+#define SOCFPGA_UART1_ADDRESS		0xffc03000
+#define SOCFPGA_I2C0_ADDRESS		0xffc04000
+#define SOCFPGA_I2C1_ADDRESS		0xffc05000
+#define SOCFPGA_I2C2_ADDRESS		0xffc06000
+#define SOCFPGA_I2C3_ADDRESS		0xffc07000
+#define SOCFPGA_SDR_ADDRESS		0xffc20000
+#define SOCFPGA_L4WD0_ADDRESS		0xffd02000
+#define SOCFPGA_L4WD1_ADDRESS		0xffd03000
+#define SOCFPGA_CLKMGR_ADDRESS		0xffd04000
+#define SOCFPGA_RSTMGR_ADDRESS		0xffd05000
+#define SOCFPGA_SYSMGR_ADDRESS		0xffd08000
+#define SOCFPGA_SPIS0_ADDRESS		0xffe02000
+#define SOCFPGA_SPIS1_ADDRESS		0xffe03000
+#define SOCFPGA_SPIM0_ADDRESS		0xfff00000
+#define SOCFPGA_SPIM1_ADDRESS		0xfff01000
+#define SOCFPGA_SCANMGR_ADDRESS		0xfff02000
+#define SOCFPGA_ROM_ADDRESS		0xfffd0000
+#define SOCFPGA_MPUSCU_ADDRESS		0xfffec000
+#define SOCFPGA_MPUL2_ADDRESS		0xfffef000
+#define SOCFPGA_OCRAM_ADDRESS		0xffff0000
+#define SOCFPGA_LWFPGASLAVES_ADDRESS	0xff200000
+#define SOCFPGA_LWHPS2FPGAREGS_ADDRESS	0xff400000
+#define SOCFPGA_HPS2FPGAREGS_ADDRESS	0xff500000
+#define SOCFPGA_FPGA2HPSREGS_ADDRESS	0xff600000
+#define SOCFPGA_FPGAMGRREGS_ADDRESS	0xff706000
+#define SOCFPGA_ACPIDMAP_ADDRESS	0xff707000
+#define SOCFPGA_NANDDATA_ADDRESS	0xff900000
+#define SOCFPGA_QSPIDATA_ADDRESS	0xffa00000
+#define SOCFPGA_NANDREGS_ADDRESS	0xffb80000
+#define SOCFPGA_FPGAMGRDATA_ADDRESS	0xffb90000
+#define SOCFPGA_SPTIMER0_ADDRESS	0xffc08000
+#define SOCFPGA_SPTIMER1_ADDRESS	0xffc09000
+#define SOCFPGA_OSC1TIMER0_ADDRESS	0xffd00000
+#define SOCFPGA_OSC1TIMER1_ADDRESS	0xffd01000
+#define SOCFPGA_DMANONSECURE_ADDRESS	0xffe00000
+#define SOCFPGA_DMASECURE_ADDRESS	0xffe01000
+
+#define SOCFPGA_PHYS_OCRAM_SIZE		0x10000
+
+#endif /* _SOCFPGA_BASE_ADDRS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_s10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_s10.h
new file mode 100644
index 000000000..d3eca65e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/base_addr_s10.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
+ */
+
+#ifndef _SOCFPGA_S10_BASE_HARDWARE_H_
+#define _SOCFPGA_S10_BASE_HARDWARE_H_
+
+#define SOCFPGA_CCU_ADDRESS			0xf7000000
+#define SOCFPGA_SDR_SCHEDULER_ADDRESS		0xf8000400
+#define SOCFPGA_HMC_MMR_IO48_ADDRESS		0xf8010000
+#define SOCFPGA_SDR_ADDRESS			0xf8011000
+#ifdef CONFIG_TARGET_SOCFPGA_AGILEX
+#define SOCFPGA_FW_MPU_DDR_SCR_ADDRESS		0xf8020200
+#else
+#define SOCFPGA_FW_MPU_DDR_SCR_ADDRESS		0xf8020100
+#endif
+#define SOCFPGA_SMMU_ADDRESS			0xfa000000
+#define SOCFPGA_MAILBOX_ADDRESS			0xffa30000
+#define SOCFPGA_UART0_ADDRESS			0xffc02000
+#define SOCFPGA_UART1_ADDRESS			0xffc02100
+#define SOCFPGA_SPTIMER0_ADDRESS		0xffc03000
+#define SOCFPGA_SPTIMER1_ADDRESS		0xffc03100
+#define SOCFPGA_SYSTIMER0_ADDRESS		0xffd00000
+#define SOCFPGA_SYSTIMER1_ADDRESS		0xffd00100
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00200
+#define SOCFPGA_L4WD1_ADDRESS			0xffd00300
+#define SOCFPGA_L4WD2_ADDRESS			0xffd00400
+#define SOCFPGA_L4WD3_ADDRESS			0xffd00500
+#define SOCFPGA_GTIMER_SEC_ADDRESS		0xffd01000
+#define SOCFPGA_GTIMER_NSEC_ADDRESS		0xffd02000
+#define SOCFPGA_CLKMGR_ADDRESS			0xffd10000
+#define SOCFPGA_RSTMGR_ADDRESS			0xffd11000
+#define SOCFPGA_SYSMGR_ADDRESS			0xffd12000
+#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS	0xffd13000
+#define SOCFPGA_FIREWALL_L4_PER			0xffd21000
+#define SOCFPGA_FIREWALL_L4_SYS			0xffd21100
+#define SOCFPGA_FIREWALL_SOC2FPGA		0xffd21200
+#define SOCFPGA_FIREWALL_LWSOC2FPGA		0xffd21300
+#define SOCFPGA_FIREWALL_TCU			0xffd21400
+#define SOCFPGA_DMANONSECURE_ADDRESS		0xffda0000
+#define SOCFPGA_DMASECURE_ADDRESS		0xffda1000
+#define SOCFPGA_OCRAM_ADDRESS			0xffe00000
+#define GICD_BASE				0xfffc1000
+#define GICC_BASE				0xfffc2000
+
+#endif /* _SOCFPGA_S10_BASE_HARDWARE_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/boot0.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/boot0.h
new file mode 100644
index 000000000..c78def506
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/boot0.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Specialty padding for the Altera SoCFPGA preloader image
+ */
+
+#ifndef __BOOT0_H
+#define __BOOT0_H
+
+_start:
+	ARM_VECTORS
+
+#ifdef CONFIG_SPL_BUILD
+	.balignl 64,0xf33db33f;
+
+	.word	0x1337c0d3;	/* SoCFPGA preloader validation word */
+	.word	0xc01df00d;	/* Version, flags, length */
+	.word	0xcafec0d3;	/* Checksum, zero-pad */
+	nop;
+
+	b reset;		/* SoCFPGA Gen5 jumps here */
+	b reset;		/* SoCFPGA Gen10 trampoline */
+	nop;
+	nop;
+#endif
+
+#endif /* __BOOT0_H */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager.h
new file mode 100644
index 000000000..2f9b471af
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _CLOCK_MANAGER_H_
+#define _CLOCK_MANAGER_H_
+
+phys_addr_t socfpga_get_clkmgr_addr(void);
+
+#ifndef __ASSEMBLY__
+void cm_wait_for_lock(u32 mask);
+int cm_wait_for_fsm(void);
+void cm_print_clock_quick_summary(void);
+unsigned int cm_get_qspi_controller_clk_hz(void);
+
+#if defined(CONFIG_TARGET_SOCFPGA_SOC64)
+int cm_set_qspi_controller_clk_hz(u32 clk_hz);
+#endif
+#endif
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/clock_manager_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/clock_manager_arria10.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_STRATIX10)
+#include <asm/arch/clock_manager_s10.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_AGILEX)
+#include <asm/arch/clock_manager_agilex.h>
+#endif
+
+#endif /* _CLOCK_MANAGER_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h
new file mode 100644
index 000000000..386e82a4e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Intel Corporation <www.intel.com>
+ */
+
+#ifndef _CLOCK_MANAGER_AGILEX_
+#define _CLOCK_MANAGER_AGILEX_
+
+unsigned long cm_get_mpu_clk_hz(void);
+
+#include <asm/arch/clock_manager_soc64.h>
+#include "../../../../../drivers/clk/altera/clk-agilex.h"
+
+#endif /* _CLOCK_MANAGER_AGILEX_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h
new file mode 100644
index 000000000..798d3741b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ */
+
+#ifndef CLOCK_MANAGER_ARRIA10
+#define CLOCK_MANAGER_ARRIA10
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/* Clock manager group */
+#define CLKMGR_A10_CTRL				0x00
+#define CLKMGR_A10_INTR				0x04
+#define CLKMGR_A10_STAT				0x1c
+/* MainPLL group */
+#define CLKMGR_A10_MAINPLL_VCO0			0x40
+#define CLKMGR_A10_MAINPLL_VCO1			0x44
+#define CLKMGR_A10_MAINPLL_EN			0x48
+#define CLKMGR_A10_MAINPLL_ENS			0x4c
+#define CLKMGR_A10_MAINPLL_ENR			0x50
+#define CLKMGR_A10_MAINPLL_BYPASS		0x54
+#define CLKMGR_A10_MAINPLL_BYPASSS		0x58
+#define CLKMGR_A10_MAINPLL_BYPASSR		0x5c
+#define CLKMGR_A10_MAINPLL_MPUCLK		0x60
+#define CLKMGR_A10_MAINPLL_NOCCLK		0x64
+#define CLKMGR_A10_MAINPLL_CNTR2CLK		0x68
+#define CLKMGR_A10_MAINPLL_CNTR3CLK		0x6c
+#define CLKMGR_A10_MAINPLL_CNTR4CLK		0x70
+#define CLKMGR_A10_MAINPLL_CNTR5CLK		0x74
+#define CLKMGR_A10_MAINPLL_CNTR6CLK		0x78
+#define CLKMGR_A10_MAINPLL_CNTR7CLK		0x7c
+#define CLKMGR_A10_MAINPLL_CNTR8CLK		0x80
+#define CLKMGR_A10_MAINPLL_CNTR9CLK		0x84
+#define CLKMGR_A10_MAINPLL_CNTR15CLK		0x9c
+#define CLKMGR_A10_MAINPLL_NOCDIV		0xa8
+/* Peripheral PLL group */
+#define CLKMGR_A10_PERPLL_VCO0			0xc0
+#define CLKMGR_A10_PERPLL_VCO1			0xc4
+#define CLKMGR_A10_PERPLL_EN			0xc8
+#define CLKMGR_A10_PERPLL_ENS			0xcc
+#define CLKMGR_A10_PERPLL_ENR			0xd0
+#define CLKMGR_A10_PERPLL_BYPASS		0xd4
+#define CLKMGR_A10_PERPLL_BYPASSS		0xd8
+#define CLKMGR_A10_PERPLL_BYPASSR		0xdc
+#define CLKMGR_A10_PERPLL_CNTR2CLK		0xe8
+#define CLKMGR_A10_PERPLL_CNTR3CLK		0xec
+#define CLKMGR_A10_PERPLL_CNTR4CLK		0xf0
+#define CLKMGR_A10_PERPLL_CNTR5CLK		0xf4
+#define CLKMGR_A10_PERPLL_CNTR6CLK		0xf8
+#define CLKMGR_A10_PERPLL_CNTR7CLK		0xfc
+#define CLKMGR_A10_PERPLL_CNTR8CLK		0x100
+#define CLKMGR_A10_PERPLL_CNTR9CLK		0x104
+#define CLKMGR_A10_PERPLL_EMACCTL		0x128
+#define CLKMGR_A10_PERPLL_GPIOFIV		0x12c
+/* Altera group */
+#define CLKMGR_A10_ALTR_MPUCLK			0x140
+#define CLKMGR_A10_ALTR_NOCCLK			0x144
+
+#define CLKMGR_STAT				CLKMGR_A10_STAT
+#define CLKMGR_INTER				CLKMGR_A10_INTER
+#define CLKMGR_PERPLL_EN			CLKMGR_A10_PERPLL_EN
+
+#ifdef CONFIG_SPL_BUILD
+int cm_basic_init(const void *blob);
+#endif
+
+#include <linux/bitops.h>
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned long cm_get_mpu_clk_hz(void);
+
+#endif /* __ASSEMBLY__ */
+
+#define LOCKED_MASK	(CLKMGR_CLKMGR_STAT_MAINPLLLOCKED_SET_MSK | \
+			 CLKMGR_CLKMGR_STAT_PERPLLLOCKED_SET_MSK)
+
+/* value */
+#define CLKMGR_MAINPLL_BYPASS_RESET			0x0000003f
+#define CLKMGR_PERPLL_BYPASS_RESET			0x000000ff
+#define CLKMGR_MAINPLL_VCO0_RESET			0x00010053
+#define CLKMGR_MAINPLL_VCO1_RESET			0x00010001
+#define CLKMGR_PERPLL_VCO0_RESET			0x00010053
+#define CLKMGR_PERPLL_VCO1_RESET			0x00010001
+#define CLKMGR_MAINPLL_VCO0_PSRC_EOSC			0x0
+#define CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC		0x1
+#define CLKMGR_MAINPLL_VCO0_PSRC_F2S			0x2
+#define CLKMGR_PERPLL_VCO0_PSRC_EOSC			0x0
+#define CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC		0x1
+#define CLKMGR_PERPLL_VCO0_PSRC_F2S			0x2
+#define CLKMGR_PERPLL_VCO0_PSRC_MAIN			0x3
+
+/* mask */
+#define CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK		BIT(6)
+#define CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK	BIT(7)
+#define CLKMGR_CLKMGR_STAT_MAINPLLLOCKED_SET_MSK	BIT(8)
+#define CLKMGR_CLKMGR_STAT_PERPLLLOCKED_SET_MSK		BIT(9)
+#define CLKMGR_CLKMGR_STAT_BOOTCLKSRC_SET_MSK		BIT(17)
+#define CLKMGR_MAINPLL_VCO0_BGPWRDN_SET_MSK		BIT(0)
+#define CLKMGR_MAINPLL_VCO0_PWRDN_SET_MSK		BIT(1)
+#define CLKMGR_MAINPLL_VCO0_EN_SET_MSK			BIT(2)
+#define CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK		BIT(3)
+#define CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK		BIT(4)
+#define CLKMGR_PERPLL_VCO0_BGPWRDN_SET_MSK		BIT(0)
+#define CLKMGR_PERPLL_VCO0_PWRDN_SET_MSK		BIT(1)
+#define CLKMGR_PERPLL_VCO0_EN_SET_MSK			BIT(2)
+#define CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK		BIT(3)
+#define CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK		BIT(4)
+#define CLKMGR_CLKMGR_INTR_MAINPLLACHIEVED_SET_MSK	BIT(0)
+#define CLKMGR_CLKMGR_INTR_PERPLLACHIEVED_SET_MSK	BIT(1)
+#define CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK		BIT(2)
+#define CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK		BIT(3)
+#define CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK	BIT(8)
+#define CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK		BIT(9)
+#define CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK	BIT(10)
+#define CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK		BIT(11)
+#define CLKMGR_CLKMGR_CTL_BOOTMOD_SET_MSK		BIT(0)
+#define CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK	0x00000300
+#define CLKMGR_PERPLL_EN_RESET				0x00000f7f
+#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK		BIT(5)
+#define CLKMGR_MAINPLL_VCO0_PSRC_MSK			0x00000003
+#define CLKMGR_MAINPLL_VCO1_NUMER_MSK			0x00001fff
+#define CLKMGR_MAINPLL_VCO1_DENOM_MSK			0x0000003f
+#define CLKMGR_MAINPLL_CNTRCLK_MSK			0x000003ff
+#define CLKMGR_PERPLL_VCO0_PSRC_MSK			0x00000003
+#define CLKMGR_PERPLL_VCO1_NUMER_MSK			0x00001fff
+#define CLKMGR_PERPLL_VCO1_DENOM_MSK			0x0000003f
+#define CLKMGR_PERPLL_CNTRCLK_MSK			0x000003ff
+#define CLKMGR_MAINPLL_MPUCLK_SRC_MSK			0x00000007
+#define CLKMGR_MAINPLL_MPUCLK_CNT_MSK			0x000003ff
+#define CLKMGR_MAINPLL_MPUCLK_SRC_MAIN			0
+#define CLKMGR_MAINPLL_MPUCLK_SRC_PERI			1
+#define CLKMGR_MAINPLL_MPUCLK_SRC_OSC1			2
+#define CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC		3
+#define CLKMGR_MAINPLL_MPUCLK_SRC_FPGA			4
+#define CLKMGR_MAINPLL_NOCDIV_MSK			0x00000003
+#define CLKMGR_MAINPLL_NOCCLK_CNT_MSK			0x000003ff
+#define CLKMGR_MAINPLL_NOCCLK_SRC_MSK			0x00000007
+#define CLKMGR_MAINPLL_NOCCLK_SRC_MAIN			0
+#define CLKMGR_MAINPLL_NOCCLK_SRC_PERI			1
+#define CLKMGR_MAINPLL_NOCCLK_SRC_OSC1			2
+#define CLKMGR_MAINPLL_NOCCLK_SRC_INTOSC		3
+#define CLKMGR_MAINPLL_NOCCLK_SRC_FPGA			4
+
+#define CLKMGR_PERPLLGRP_SRC_MSK			0x00000007
+#define CLKMGR_PERPLLGRP_SRC_MAIN			0
+#define CLKMGR_PERPLLGRP_SRC_PERI			1
+#define CLKMGR_PERPLLGRP_SRC_OSC1			2
+#define CLKMGR_PERPLLGRP_SRC_INTOSC			3
+#define CLKMGR_PERPLLGRP_SRC_FPGA			4
+
+/* bit shifting macro */
+#define CLKMGR_MAINPLL_VCO0_PSRC_LSB		8
+#define CLKMGR_PERPLL_VCO0_PSRC_LSB		8
+#define CLKMGR_MAINPLL_VCO1_DENOM_LSB		16
+#define CLKMGR_PERPLL_VCO1_DENOM_LSB		16
+#define CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB	16
+#define CLKMGR_MAINPLL_NOCCLK_SRC_LSB		16
+#define CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB	0
+#define CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB	8
+#define CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB	16
+#define CLKMGR_MAINPLL_NOCDIV_CSATCLK_LSB	24
+#define CLKMGR_MAINPLL_NOCDIV_CSTRACECLK_LSB	26
+#define CLKMGR_MAINPLL_NOCDIV_CSPDBGCLK_LSB	28
+#define CLKMGR_MAINPLL_MPUCLK_SRC_LSB		16
+#define CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB	16
+#define CLKMGR_MAINPLL_NOCCLK_SRC_LSB		16
+#define CLKMGR_MAINPLL_CNTR7CLK_SRC_LSB		16
+#define CLKMGR_MAINPLL_CNTR9CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR2CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR3CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR4CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR5CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR6CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR8CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_EMACCTL_EMAC0SEL_LSB	26
+#define CLKMGR_PERPLL_EMACCTL_EMAC1SEL_LSB	27
+#define CLKMGR_PERPLL_EMACCTL_EMAC2SEL_LSB	28
+
+/* PLL ramping work around */
+#define CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ	900000000
+#define CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ	300000000
+#define CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ	100000000
+#define CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ	33000000
+
+#define CLKMGR_STAT_BUSY			BIT(0)
+
+#endif /* CLOCK_MANAGER_ARRIA10 */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
new file mode 100644
index 000000000..4cc1268b4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
@@ -0,0 +1,305 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _CLOCK_MANAGER_GEN5_H_
+#define _CLOCK_MANAGER_GEN5_H_
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+struct cm_config {
+	/* main group */
+	u32 main_vco_base;
+	u32 mpuclk;
+	u32 mainclk;
+	u32 dbgatclk;
+	u32 mainqspiclk;
+	u32 mainnandsdmmcclk;
+	u32 cfg2fuser0clk;
+	u32 maindiv;
+	u32 dbgdiv;
+	u32 tracediv;
+	u32 l4src;
+
+	/* peripheral group */
+	u32 peri_vco_base;
+	u32 emac0clk;
+	u32 emac1clk;
+	u32 perqspiclk;
+	u32 pernandsdmmcclk;
+	u32 perbaseclk;
+	u32 s2fuser1clk;
+	u32 perdiv;
+	u32 gpiodiv;
+	u32 persrc;
+
+	/* sdram pll group */
+	u32 sdram_vco_base;
+	u32 ddrdqsclk;
+	u32 ddr2xdqsclk;
+	u32 ddrdqclk;
+	u32 s2fuser2clk;
+
+	/* altera group */
+	u32 altera_grp_mpuclk;
+};
+
+/* Clock manager group */
+#define CLKMGR_GEN5_CTRL			0x00
+#define CLKMGR_GEN5_BYPASS			0x04
+#define CLKMGR_GEN5_INTER			0x08
+#define CLKMGR_GEN5_STAT			0x14
+/* MainPLL group */
+#define CLKMGR_GEN5_MAINPLL_VCO			0x40
+#define CLKMGR_GEN5_MAINPLL_MISC		0x44
+#define CLKMGR_GEN5_MAINPLL_MPUCLK		0x48
+#define CLKMGR_GEN5_MAINPLL_MAINCLK		0x4c
+#define CLKMGR_GEN5_MAINPLL_DBGATCLK		0x50
+#define CLKMGR_GEN5_MAINPLL_MAINQSPICLK		0x54
+#define CLKMGR_GEN5_MAINPLL_MAINNANDSDMMCCLK	0x58
+#define CLKMGR_GEN5_MAINPLL_CFGS2FUSER0CLK	0x5c
+#define CLKMGR_GEN5_MAINPLL_EN			0x60
+#define CLKMGR_GEN5_MAINPLL_MAINDIV		0x64
+#define CLKMGR_GEN5_MAINPLL_DBGDIV		0x68
+#define CLKMGR_GEN5_MAINPLL_TRACEDIV		0x6c
+#define CLKMGR_GEN5_MAINPLL_L4SRC		0x70
+/* Peripheral PLL group */
+#define CLKMGR_GEN5_PERPLL_VCO			0x80
+#define CLKMGR_GEN5_PERPLL_MISC			0x84
+#define CLKMGR_GEN5_PERPLL_EMAC0CLK		0x88
+#define CLKMGR_GEN5_PERPLL_EMAC1CLK		0x8c
+#define CLKMGR_GEN5_PERPLL_PERQSPICLK		0x90
+#define CLKMGR_GEN5_PERPLL_PERNANDSDMMCCLK	0x94
+#define CLKMGR_GEN5_PERPLL_PERBASECLK		0x98
+#define CLKMGR_GEN5_PERPLL_S2FUSER1CLK		0x9c
+#define CLKMGR_GEN5_PERPLL_EN			0xa0
+#define CLKMGR_GEN5_PERPLL_DIV			0xa4
+#define CLKMGR_GEN5_PERPLL_GPIODIV		0xa8
+#define CLKMGR_GEN5_PERPLL_SRC			0xac
+/* SDRAM PLL group */
+#define CLKMGR_GEN5_SDRPLL_VCO			0xc0
+#define CLKMGR_GEN5_SDRPLL_CTRL			0xc4
+#define CLKMGR_GEN5_SDRPLL_DDRDQSCLK		0xc8
+#define CLKMGR_GEN5_SDRPLL_DDR2XDQSCLK		0xcc
+#define CLKMGR_GEN5_SDRPLL_DDRDQCLK		0xd0
+#define CLKMGR_GEN5_SDRPLL_S2FUSER2CLK		0xd4
+#define CLKMGR_GEN5_SDRPLL_EN			0xd8
+/* Altera group */
+#define CLKMGR_GEN5_ALTR_MPUCLK			0xe0
+#define CLKMGR_GEN5_ALTR_MAINCLK		0xe4
+
+#define CLKMGR_STAT				CLKMGR_GEN5_STAT
+#define CLKMGR_INTER				CLKMGR_GEN5_INTER
+#define CLKMGR_PERPLL_EN			CLKMGR_GEN5_PERPLL_EN
+
+/* Clock speed accessors */
+unsigned long cm_get_mpu_clk_hz(void);
+unsigned long cm_get_sdram_clk_hz(void);
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+const unsigned int cm_get_osc_clk_hz(const int osc);
+const unsigned int cm_get_f2s_per_ref_clk_hz(void);
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
+
+/* Clock configuration accessors */
+int cm_basic_init(const struct cm_config * const cfg);
+const struct cm_config * const cm_get_default_config(void);
+#endif /* __ASSEMBLY__ */
+
+#include <linux/bitops.h>
+#define LOCKED_MASK \
+	(CLKMGR_INTER_SDRPLLLOCKED_MASK  | \
+	CLKMGR_INTER_PERPLLLOCKED_MASK  | \
+	CLKMGR_INTER_MAINPLLLOCKED_MASK)
+
+#define CLKMGR_CTRL_SAFEMODE				BIT(0)
+#define CLKMGR_CTRL_SAFEMODE_OFFSET			0
+
+#define CLKMGR_BYPASS_PERPLLSRC				BIT(4)
+#define CLKMGR_BYPASS_PERPLLSRC_OFFSET			4
+#define CLKMGR_BYPASS_PERPLL				BIT(3)
+#define CLKMGR_BYPASS_PERPLL_OFFSET			3
+#define CLKMGR_BYPASS_SDRPLLSRC				BIT(2)
+#define CLKMGR_BYPASS_SDRPLLSRC_OFFSET			2
+#define CLKMGR_BYPASS_SDRPLL				BIT(1)
+#define CLKMGR_BYPASS_SDRPLL_OFFSET			1
+#define CLKMGR_BYPASS_MAINPLL				BIT(0)
+#define CLKMGR_BYPASS_MAINPLL_OFFSET			0
+
+#define CLKMGR_INTER_MAINPLLLOST_MASK			BIT(3)
+#define CLKMGR_INTER_PERPLLLOST_MASK			BIT(4)
+#define CLKMGR_INTER_SDRPLLLOST_MASK			BIT(5)
+#define CLKMGR_INTER_MAINPLLLOCKED_MASK			BIT(6)
+#define CLKMGR_INTER_PERPLLLOCKED_MASK			BIT(7)
+#define CLKMGR_INTER_SDRPLLLOCKED_MASK			BIT(8)
+
+#define CLKMGR_STAT_BUSY				BIT(0)
+
+/* Main PLL */
+#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN			BIT(0)
+#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_OFFSET		0
+#define CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET		16
+#define CLKMGR_MAINPLLGRP_VCO_DENOM_MASK		0x003f0000
+#define CLKMGR_MAINPLLGRP_VCO_EN			BIT(1)
+#define CLKMGR_MAINPLLGRP_VCO_EN_OFFSET			1
+#define CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET		3
+#define CLKMGR_MAINPLLGRP_VCO_NUMER_MASK		0x0000fff8
+#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK		0x01000000
+#define CLKMGR_MAINPLLGRP_VCO_PWRDN			BIT(2)
+#define CLKMGR_MAINPLLGRP_VCO_PWRDN_OFFSET		2
+#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK		0x80000000
+#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE		0x8001000d
+
+#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET		0
+#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET		0
+#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET		0
+#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET	0
+#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_OFFSET	0
+#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_MASK	0x000001ff
+
+#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET	0
+#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_MASK	0x000001ff
+
+#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK		BIT(2)
+#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK		BIT(4)
+#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK		BIT(5)
+#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK		BIT(6)
+#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK		BIT(7)
+#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK		BIT(9)
+
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET	0
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_MASK		0x00000003
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET	2
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_MASK		0x0000000c
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET	4
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_MASK		0x00000070
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET	7
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK		0x00000380
+
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET	0
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_MASK		0x00000003
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET		2
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_MASK		0x0000000c
+
+#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET	0
+#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_MASK	0x00000007
+
+#define CLKMGR_MAINPLLGRP_L4SRC_L4MP			BIT(0)
+#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET		0
+#define CLKMGR_MAINPLLGRP_L4SRC_L4SP			BIT(1)
+#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET		1
+#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE		0x00000000
+#define CLKMGR_L4_SP_CLK_SRC_MAINPLL			0x0
+#define CLKMGR_L4_SP_CLK_SRC_PERPLL			0x1
+
+/* Per PLL */
+#define CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET		16
+#define CLKMGR_PERPLLGRP_VCO_DENOM_MASK			0x003f0000
+#define CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET		3
+#define CLKMGR_PERPLLGRP_VCO_NUMER_MASK			0x0000fff8
+#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK		0x01000000
+#define CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET		22
+#define CLKMGR_PERPLLGRP_VCO_PSRC_MASK			0x00c00000
+#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK		0x80000000
+#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE		0x8001000d
+#define CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET		22
+#define CLKMGR_PERPLLGRP_VCO_SSRC_MASK			0x00c00000
+
+#define CLKMGR_VCO_SSRC_EOSC1				0x0
+#define CLKMGR_VCO_SSRC_EOSC2				0x1
+#define CLKMGR_VCO_SSRC_F2S				0x2
+
+#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET		0
+#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET		0
+#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET		0
+#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET	0
+#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_MASK	0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET		0
+#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET		0
+#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_MASK		0x000001ff
+
+#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK		0x00000400
+#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK		0x00000100
+
+#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET		6
+#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_MASK		0x000001c0
+#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET		9
+#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_MASK		0x00000e00
+#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET		3
+#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET		3
+#define CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET		0
+#define CLKMGR_PERPLLGRP_DIV_USBCLK_MASK		0x00000007
+
+#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET	0
+#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_MASK		0x00ffffff
+
+#define CLKMGR_PERPLLGRP_SRC_NAND_OFFSET		2
+#define CLKMGR_PERPLLGRP_SRC_NAND_MASK			0x0000000c
+#define CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET		4
+#define CLKMGR_PERPLLGRP_SRC_QSPI_MASK			0x00000030
+#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE		0x00000015
+#define CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET		0
+#define CLKMGR_PERPLLGRP_SRC_SDMMC_MASK			0x00000003
+#define CLKMGR_SDMMC_CLK_SRC_F2S			0x0
+#define CLKMGR_SDMMC_CLK_SRC_MAIN			0x1
+#define CLKMGR_SDMMC_CLK_SRC_PER			0x2
+#define CLKMGR_QSPI_CLK_SRC_F2S				0x0
+#define CLKMGR_QSPI_CLK_SRC_MAIN			0x1
+#define CLKMGR_QSPI_CLK_SRC_PER				0x2
+
+/* SDR PLL */
+#define CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET		16
+#define CLKMGR_SDRPLLGRP_VCO_DENOM_MASK			0x003f0000
+#define CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET		3
+#define CLKMGR_SDRPLLGRP_VCO_NUMER_MASK			0x0000fff8
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL		BIT(24)
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_OFFSET		24
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_OFFSET		25
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK		0x7e000000
+#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK		BIT(31)
+#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE		0x8001000d
+#define CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET		22
+#define CLKMGR_SDRPLLGRP_VCO_SSRC_MASK			0x00c00000
+
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET		0
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK		0x000001ff
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET		9
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK		0x00000e00
+
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET		0
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK		0x000001ff
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET	9
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK		0x00000e00
+
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET		0
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK		0x000001ff
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET		9
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK		0x00000e00
+
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET		0
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK		0x000001ff
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET	9
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK		0x00000e00
+
+#endif /* _CLOCK_MANAGER_GEN5_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_s10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_s10.h
new file mode 100644
index 000000000..98c3bf1b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_s10.h
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2016-2019 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef	_CLOCK_MANAGER_S10_
+#define	_CLOCK_MANAGER_S10_
+
+#include <asm/arch/clock_manager_soc64.h>
+#include <linux/bitops.h>
+
+/* Clock speed accessors */
+unsigned long cm_get_mpu_clk_hz(void);
+unsigned long cm_get_sdram_clk_hz(void);
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+
+struct cm_config {
+	/* main group */
+	u32 main_pll_mpuclk;
+	u32 main_pll_nocclk;
+	u32 main_pll_cntr2clk;
+	u32 main_pll_cntr3clk;
+	u32 main_pll_cntr4clk;
+	u32 main_pll_cntr5clk;
+	u32 main_pll_cntr6clk;
+	u32 main_pll_cntr7clk;
+	u32 main_pll_cntr8clk;
+	u32 main_pll_cntr9clk;
+	u32 main_pll_nocdiv;
+	u32 main_pll_pllglob;
+	u32 main_pll_fdbck;
+	u32 main_pll_pllc0;
+	u32 main_pll_pllc1;
+	u32 spare;
+
+	/* peripheral group */
+	u32 per_pll_cntr2clk;
+	u32 per_pll_cntr3clk;
+	u32 per_pll_cntr4clk;
+	u32 per_pll_cntr5clk;
+	u32 per_pll_cntr6clk;
+	u32 per_pll_cntr7clk;
+	u32 per_pll_cntr8clk;
+	u32 per_pll_cntr9clk;
+	u32 per_pll_emacctl;
+	u32 per_pll_gpiodiv;
+	u32 per_pll_pllglob;
+	u32 per_pll_fdbck;
+	u32 per_pll_pllc0;
+	u32 per_pll_pllc1;
+
+	/* incoming clock */
+	u32 hps_osc_clk_hz;
+	u32 fpga_clk_hz;
+};
+
+void cm_basic_init(const struct cm_config * const cfg);
+
+/* Control status */
+#define CLKMGR_S10_CTRL					0x00
+#define CLKMGR_S10_STAT					0x04
+#define CLKMGR_S10_INTRCLR				0x14
+/* Mainpll group */
+#define CLKMGR_S10_MAINPLL_EN				0x30
+#define CLKMGR_S10_MAINPLL_BYPASS			0x3c
+#define CLKMGR_S10_MAINPLL_MPUCLK			0x48
+#define CLKMGR_S10_MAINPLL_NOCCLK			0x4c
+#define CLKMGR_S10_MAINPLL_CNTR2CLK			0x50
+#define CLKMGR_S10_MAINPLL_CNTR3CLK			0x54
+#define CLKMGR_S10_MAINPLL_CNTR4CLK			0x58
+#define CLKMGR_S10_MAINPLL_CNTR5CLK			0x5c
+#define CLKMGR_S10_MAINPLL_CNTR6CLK			0x60
+#define CLKMGR_S10_MAINPLL_CNTR7CLK			0x64
+#define CLKMGR_S10_MAINPLL_CNTR8CLK			0x68
+#define CLKMGR_S10_MAINPLL_CNTR9CLK			0x6c
+#define CLKMGR_S10_MAINPLL_NOCDIV			0x70
+#define CLKMGR_S10_MAINPLL_PLLGLOB			0x74
+#define CLKMGR_S10_MAINPLL_FDBCK			0x78
+#define CLKMGR_S10_MAINPLL_MEMSTAT			0x80
+#define CLKMGR_S10_MAINPLL_PLLC0			0x84
+#define CLKMGR_S10_MAINPLL_PLLC1			0x88
+#define CLKMGR_S10_MAINPLL_VCOCALIB			0x8c
+/* Periphpll group */
+#define CLKMGR_S10_PERPLL_EN				0xa4
+#define CLKMGR_S10_PERPLL_BYPASS			0xb0
+#define CLKMGR_S10_PERPLL_CNTR2CLK			0xbc
+#define CLKMGR_S10_PERPLL_CNTR3CLK			0xc0
+#define CLKMGR_S10_PERPLL_CNTR4CLK			0xc4
+#define CLKMGR_S10_PERPLL_CNTR5CLK			0xc8
+#define CLKMGR_S10_PERPLL_CNTR6CLK			0xcc
+#define CLKMGR_S10_PERPLL_CNTR7CLK			0xd0
+#define CLKMGR_S10_PERPLL_CNTR8CLK			0xd4
+#define CLKMGR_S10_PERPLL_CNTR9CLK			0xd8
+#define CLKMGR_S10_PERPLL_EMACCTL			0xdc
+#define CLKMGR_S10_PERPLL_GPIODIV			0xe0
+#define CLKMGR_S10_PERPLL_PLLGLOB			0xe4
+#define CLKMGR_S10_PERPLL_FDBCK				0xe8
+#define CLKMGR_S10_PERPLL_MEMSTAT			0xf0
+#define CLKMGR_S10_PERPLL_PLLC0				0xf4
+#define CLKMGR_S10_PERPLL_PLLC1				0xf8
+#define CLKMGR_S10_PERPLL_VCOCALIB			0xfc
+
+#define CLKMGR_STAT					CLKMGR_S10_STAT
+#define CLKMGR_INTER					CLKMGR_S10_INTER
+#define CLKMGR_PERPLL_EN				CLKMGR_S10_PERPLL_EN
+
+
+#define CLKMGR_CTRL_SAFEMODE				BIT(0)
+#define CLKMGR_BYPASS_MAINPLL_ALL			0x00000007
+#define CLKMGR_BYPASS_PERPLL_ALL			0x0000007f
+
+#define CLKMGR_INTER_MAINPLLLOCKED_MASK			0x00000001
+#define CLKMGR_INTER_PERPLLLOCKED_MASK			0x00000002
+#define CLKMGR_INTER_MAINPLLLOST_MASK			0x00000004
+#define CLKMGR_INTER_PERPLLLOST_MASK			0x00000008
+#define CLKMGR_STAT_BUSY				BIT(0)
+#define CLKMGR_STAT_MAINPLL_LOCKED			BIT(8)
+#define CLKMGR_STAT_PERPLL_LOCKED			BIT(9)
+
+#define CLKMGR_PLLGLOB_PD_MASK				0x00000001
+#define CLKMGR_PLLGLOB_RST_MASK				0x00000002
+#define CLKMGR_PLLGLOB_VCO_PSRC_MASK			0X3
+#define CLKMGR_PLLGLOB_VCO_PSRC_OFFSET			16
+#define CLKMGR_VCO_PSRC_EOSC1				0
+#define CLKMGR_VCO_PSRC_INTOSC				1
+#define CLKMGR_VCO_PSRC_F2S				2
+#define CLKMGR_PLLGLOB_REFCLKDIV_MASK			0X3f
+#define CLKMGR_PLLGLOB_REFCLKDIV_OFFSET			8
+
+#define CLKMGR_CLKSRC_MASK				0x7
+#define CLKMGR_CLKSRC_OFFSET				16
+#define CLKMGR_CLKSRC_MAIN				0
+#define CLKMGR_CLKSRC_PER				1
+#define CLKMGR_CLKSRC_OSC1				2
+#define CLKMGR_CLKSRC_INTOSC				3
+#define CLKMGR_CLKSRC_FPGA				4
+#define CLKMGR_CLKCNT_MSK				0x7ff
+
+#define CLKMGR_FDBCK_MDIV_MASK				0xff
+#define CLKMGR_FDBCK_MDIV_OFFSET			24
+
+#define CLKMGR_PLLC0_DIV_MASK				0xff
+#define CLKMGR_PLLC1_DIV_MASK				0xff
+#define CLKMGR_PLLC0_EN_OFFSET				27
+#define CLKMGR_PLLC1_EN_OFFSET				24
+
+#define CLKMGR_NOCDIV_L4MAIN_OFFSET			0
+#define CLKMGR_NOCDIV_L4MPCLK_OFFSET			8
+#define CLKMGR_NOCDIV_L4SPCLK_OFFSET			16
+#define CLKMGR_NOCDIV_CSATCLK_OFFSET			24
+#define CLKMGR_NOCDIV_CSTRACECLK_OFFSET			26
+#define CLKMGR_NOCDIV_CSPDBGCLK_OFFSET			28
+
+#define CLKMGR_NOCDIV_L4SPCLK_MASK			0X3
+#define CLKMGR_NOCDIV_DIV1				0
+#define CLKMGR_NOCDIV_DIV2				1
+#define CLKMGR_NOCDIV_DIV4				2
+#define CLKMGR_NOCDIV_DIV8				3
+#define CLKMGR_CSPDBGCLK_DIV1				0
+#define CLKMGR_CSPDBGCLK_DIV4				1
+
+#define CLKMGR_MSCNT_CONST				200
+#define CLKMGR_MDIV_CONST				6
+#define CLKMGR_HSCNT_CONST				9
+
+#define CLKMGR_VCOCALIB_MSCNT_MASK			0xff
+#define CLKMGR_VCOCALIB_MSCNT_OFFSET			9
+#define CLKMGR_VCOCALIB_HSCNT_MASK			0xff
+
+#define CLKMGR_EMACCTL_EMAC0SEL_OFFSET			26
+#define CLKMGR_EMACCTL_EMAC1SEL_OFFSET			27
+#define CLKMGR_EMACCTL_EMAC2SEL_OFFSET			28
+
+#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK		0x00000020
+
+#endif /* _CLOCK_MANAGER_S10_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_soc64.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_soc64.h
new file mode 100644
index 000000000..71fbaa766
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/clock_manager_soc64.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2016-2019 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef _CLOCK_MANAGER_SOC64_
+#define _CLOCK_MANAGER_SOC64_
+
+const unsigned int cm_get_osc_clk_hz(void);
+const unsigned int cm_get_f2s_per_ref_clk_hz(void);
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
+const unsigned int cm_get_intosc_clk_hz(void);
+const unsigned int cm_get_fpga_clk_hz(void);
+
+#define CLKMGR_INTOSC_HZ	400000000
+
+/* Clock configuration accessors */
+const struct cm_config * const cm_get_default_config(void);
+
+#endif /* _CLOCK_MANAGER_SOC64_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/firewall.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/firewall.h
new file mode 100644
index 000000000..adab65bc9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/firewall.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2017-2019 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef	_FIREWALL_H_
+#define	_FIREWALL_H_
+
+#include <linux/bitops.h>
+
+struct socfpga_firwall_l4_per {
+	u32	nand;		/* 0x00 */
+	u32	nand_data;
+	u32	_pad_0x8;
+	u32	usb0;
+	u32	usb1;		/* 0x10 */
+	u32	_pad_0x14;
+	u32	_pad_0x18;
+	u32	spim0;
+	u32	spim1;		/* 0x20 */
+	u32	spis0;
+	u32	spis1;
+	u32	emac0;
+	u32	emac1;		/* 0x30 */
+	u32	emac2;
+	u32	_pad_0x38;
+	u32	_pad_0x3c;
+	u32	sdmmc;		/* 0x40 */
+	u32	gpio0;
+	u32	gpio1;
+	u32	_pad_0x4c;
+	u32	i2c0;		/* 0x50 */
+	u32	i2c1;
+	u32	i2c2;
+	u32	i2c3;
+	u32	i2c4;		/* 0x60 */
+	u32	timer0;
+	u32	timer1;
+	u32	uart0;
+	u32	uart1;		/* 0x70 */
+};
+
+struct socfpga_firwall_l4_sys {
+	u32	_pad_0x00;		/* 0x00 */
+	u32	_pad_0x04;
+	u32	dma_ecc;
+	u32	emac0rx_ecc;
+	u32	emac0tx_ecc;		/* 0x10 */
+	u32	emac1rx_ecc;
+	u32	emac1tx_ecc;
+	u32	emac2rx_ecc;
+	u32	emac2tx_ecc;		/* 0x20 */
+	u32	_pad_0x24;
+	u32	_pad_0x28;
+	u32	nand_ecc;
+	u32	nand_read_ecc;		/* 0x30 */
+	u32	nand_write_ecc;
+	u32	ocram_ecc;
+	u32	_pad_0x3c;
+	u32	sdmmc_ecc;		/* 0x40 */
+	u32	usb0_ecc;
+	u32	usb1_ecc;
+	u32	clock_manager;
+	u32	_pad_0x50;		/* 0x50 */
+	u32	io_manager;
+	u32	reset_manager;
+	u32	system_manager;
+	u32	osc0_timer;		/* 0x60 */
+	u32	osc1_timer;
+	u32	watchdog0;
+	u32	watchdog1;
+	u32	watchdog2;		/* 0x70 */
+	u32	watchdog3;
+};
+
+#define FIREWALL_L4_DISABLE_ALL		(BIT(0) | BIT(24) | BIT(16))
+#define FIREWALL_BRIDGE_DISABLE_ALL	(~0)
+
+/* Cache coherency unit (CCU) registers */
+#define CCU_CPU0_MPRT_ADBASE_DDRREG		0x4400
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE0		0x45c0
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1A		0x45e0
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1B		0x4600
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1C		0x4620
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1D		0x4640
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1E		0x4660
+
+#define CCU_CPU0_MPRT_ADMASK_MEM_RAM0		0x4688
+
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE0		0x18560
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1A		0x18580
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1B		0x185a0
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1C		0x185c0
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1D		0x185e0
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1E		0x18600
+
+#define CCU_IOM_MPRT_ADMASK_MEM_RAM0		0x18628
+
+#define CCU_TCU_MPRT_ADBASE_MEMSPACE0		0x2c520
+#define CCU_TCU_MPRT_ADBASE_MEMSPACE1A		0x2c540
+#define CCU_TCU_MPRT_ADBASE_MEMSPACE1B		0x2c560
+#define CCU_TCU_MPRT_ADBASE_MEMSPACE1C		0x2c580
+#define CCU_TCU_MPRT_ADBASE_MEMSPACE1D		0x2c5a0
+#define CCU_TCU_MPRT_ADBASE_MEMSPACE1E		0x2c5c0
+
+#define CCU_ADMASK_P_MASK			BIT(0)
+#define CCU_ADMASK_NS_MASK			BIT(1)
+
+#define CCU_ADBASE_DI_MASK			BIT(4)
+
+#define CCU_REG_ADDR(reg)			\
+	(SOCFPGA_CCU_ADDRESS + (reg))
+
+/* Firewall MPU DDR SCR registers */
+#define FW_MPU_DDR_SCR_EN				0x00
+#define FW_MPU_DDR_SCR_EN_SET				0x04
+#define FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMIT		0x18
+#define FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMITEXT		0x1c
+#define FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMIT		0x98
+#define FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMITEXT	0x9c
+
+#define MPUREGION0_ENABLE				BIT(0)
+#define NONMPUREGION0_ENABLE				BIT(8)
+
+#define FW_MPU_DDR_SCR_WRITEL(data, reg)		\
+	writel(data, SOCFPGA_FW_MPU_DDR_SCR_ADDRESS + (reg))
+
+void firewall_setup(void);
+
+#endif /* _FIREWALL_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager.h
new file mode 100644
index 000000000..481b66bbd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+ * All rights reserved.
+ */
+
+#ifndef	_FPGA_MANAGER_H_
+#define	_FPGA_MANAGER_H_
+
+#include <altera.h>
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/fpga_manager_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/fpga_manager_arria10.h>
+#endif
+
+/* FPGA CD Ratio Value */
+#define CDRATIO_x1				0x0
+#define CDRATIO_x2				0x1
+#define CDRATIO_x4				0x2
+#define CDRATIO_x8				0x3
+
+#ifndef __ASSEMBLY__
+
+/* Common prototypes */
+int fpgamgr_get_mode(void);
+int fpgamgr_poll_fpga_ready(void);
+void fpgamgr_program_write(const void *rbf_data, size_t rbf_size);
+int fpgamgr_test_fpga_ready(void);
+int fpgamgr_dclkcnt_set(unsigned long cnt);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _FPGA_MANAGER_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
new file mode 100644
index 000000000..048708202
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017-2019 Intel Corporation <www.intel.com>
+ * All rights reserved.
+ */
+
+#include <asm/cache.h>
+#include <altera.h>
+#include <image.h>
+#include <linux/bitops.h>
+
+#ifndef _FPGA_MANAGER_ARRIA10_H_
+#define _FPGA_MANAGER_ARRIA10_H_
+
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR_SET_MSK		BIT(0)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK	BIT(1)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK 		BIT(2)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_INITDONE_OE_SET_MSK 	BIT(3)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK		BIT(4)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_OE_SET_MSK		BIT(5)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK		BIT(6)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_OE_SET_MSK		BIT(7)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_CVP_CONF_DONE_SET_MSK	BIT(8)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_PR_READY_SET_MSK		BIT(9)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE_SET_MSK		BIT(10)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR_SET_MSK		BIT(11)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN_SET_MSK		BIT(12)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_NCEO_OE_SET_MSK		BIT(13)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_SET_MSK    		BIT(16)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL1_SET_MSK    		BIT(17)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL2_SET_MSK    		BIT(18)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SET_MSD (\
+	ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_SET_MSK |\
+	ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL1_SET_MSK |\
+	ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL2_SET_MSK)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_IMGCFG_FIFOEMPTY_SET_MSK	BIT(24)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_IMGCFG_FIFOFULL_SET_MSK	BIT(25)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_JTAGM_SET_MSK		BIT(28)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_EMR_SET_MSK			BIT(29)
+#define ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_LSB			16
+
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG_SET_MSK	BIT(0)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS_SET_MSK	BIT(1)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE_SET_MSK	BIT(2)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK		BIT(8)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE_SET_MSK	BIT(16)
+#define ALT_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE_SET_MSK	BIT(24)
+
+#define ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG_SET_MSK	BIT(0)
+#define ALT_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST_SET_MSK	BIT(16)
+#define ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK		BIT(24)
+
+#define ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK    	BIT(0)
+#define ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK    	BIT(8)
+#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK    		0x00030000
+#define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK		BIT(24)
+#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB			16
+
+#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED	0xa65c
+#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED		0xa65d
+#define FPGA_SOCFPGA_A10_RBF_PERIPH		0x0001
+#define FPGA_SOCFPGA_A10_RBF_CORE		0x8001
+#ifndef __ASSEMBLY__
+
+struct socfpga_fpga_manager {
+	u32  _pad_0x0_0x7[2];
+	u32  dclkcnt;
+	u32  dclkstat;
+	u32  gpo;
+	u32  gpi;
+	u32  misci;
+	u32  _pad_0x1c_0x2f[5];
+	u32  emr_data0;
+	u32  emr_data1;
+	u32  emr_data2;
+	u32  emr_data3;
+	u32  emr_data4;
+	u32  emr_data5;
+	u32  emr_valid;
+	u32  emr_en;
+	u32  jtag_config;
+	u32  jtag_status;
+	u32  jtag_kick;
+	u32  _pad_0x5c_0x5f;
+	u32  jtag_data_w;
+	u32  jtag_data_r;
+	u32  _pad_0x68_0x6f[2];
+	u32  imgcfg_ctrl_00;
+	u32  imgcfg_ctrl_01;
+	u32  imgcfg_ctrl_02;
+	u32  _pad_0x7c_0x7f;
+	u32  imgcfg_stat;
+	u32  intr_masked_status;
+	u32  intr_mask;
+	u32  intr_polarity;
+	u32  dma_config;
+	u32  imgcfg_fifo_status;
+};
+
+enum rbf_type {
+	unknown,
+	periph_section,
+	core_section
+};
+
+enum rbf_security {
+	invalid,
+	unencrypted,
+	encrypted
+};
+
+struct rbf_info {
+	enum rbf_type section;
+	enum rbf_security security;
+};
+
+struct fpga_loadfs_info {
+	fpga_fs_info *fpga_fsinfo;
+	u32 remaining;
+	u32 offset;
+	struct rbf_info rbfinfo;
+};
+
+/* Functions */
+int fpgamgr_program_init(u32 * rbf_data, size_t rbf_size);
+int fpgamgr_program_finish(void);
+int is_fpgamgr_user_mode(void);
+int fpgamgr_wait_early_user_mode(void);
+const char *get_fpga_filename(void);
+int is_fpgamgr_early_user_mode(void);
+int socfpga_loadfs(fpga_fs_info *fpga_fsinfo, const void *buf, size_t bsize,
+		  u32 offset);
+void fpgamgr_program(const void *buf, size_t bsize, u32 offset);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _FPGA_MANAGER_ARRIA10_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h
new file mode 100644
index 000000000..e08c00562
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/fpga_manager_gen5.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+ * All rights reserved.
+ */
+
+#ifndef _FPGA_MANAGER_GEN5_H_
+#define _FPGA_MANAGER_GEN5_H_
+
+#include <linux/bitops.h>
+#define FPGAMGRREGS_STAT_MODE_MASK		0x7
+#define FPGAMGRREGS_STAT_MSEL_MASK		0xf8
+#define FPGAMGRREGS_STAT_MSEL_LSB		3
+
+#define FPGAMGRREGS_CTRL_CFGWDTH_MASK		BIT(9)
+#define FPGAMGRREGS_CTRL_AXICFGEN_MASK		BIT(8)
+#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK	BIT(2)
+#define FPGAMGRREGS_CTRL_NCE_MASK		BIT(1)
+#define FPGAMGRREGS_CTRL_EN_MASK		BIT(0)
+#define FPGAMGRREGS_CTRL_CDRATIO_LSB		6
+
+#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK	BIT(3)
+#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK	BIT(2)
+#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK	BIT(1)
+#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK	BIT(0)
+
+/* FPGA Mode */
+#define FPGAMGRREGS_MODE_FPGAOFF		0x0
+#define FPGAMGRREGS_MODE_RESETPHASE		0x1
+#define FPGAMGRREGS_MODE_CFGPHASE		0x2
+#define FPGAMGRREGS_MODE_INITPHASE		0x3
+#define FPGAMGRREGS_MODE_USERMODE		0x4
+#define FPGAMGRREGS_MODE_UNKNOWN		0x5
+
+#ifndef __ASSEMBLY__
+
+struct socfpga_fpga_manager {
+	/* FPGA Manager Module */
+	u32	stat;			/* 0x00 */
+	u32	ctrl;
+	u32	dclkcnt;
+	u32	dclkstat;
+	u32	gpo;			/* 0x10 */
+	u32	gpi;
+	u32	misci;			/* 0x18 */
+	u32	_pad_0x1c_0x82c[517];
+
+	/* Configuration Monitor (MON) Registers */
+	u32	gpio_inten;		/* 0x830 */
+	u32	gpio_intmask;
+	u32	gpio_inttype_level;
+	u32	gpio_int_polarity;
+	u32	gpio_intstatus;		/* 0x840 */
+	u32	gpio_raw_intstatus;
+	u32	_pad_0x848;
+	u32	gpio_porta_eoi;
+	u32	gpio_ext_porta;		/* 0x850 */
+	u32	_pad_0x854_0x85c[3];
+	u32	gpio_1s_sync;		/* 0x860 */
+	u32	_pad_0x864_0x868[2];
+	u32	gpio_ver_id_code;
+	u32	gpio_config_reg2;	/* 0x870 */
+	u32	gpio_config_reg1;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _FPGA_MANAGER_GEN5_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/freeze_controller.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/freeze_controller.h
new file mode 100644
index 000000000..80846a67f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/freeze_controller.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+#ifndef	_FREEZE_CONTROLLER_H_
+#define	_FREEZE_CONTROLLER_H_
+
+struct socfpga_freeze_controller {
+	u32	vioctrl;
+	u32	padding[3];
+	u32	hioctrl;
+	u32	src;
+	u32	hwctrl;
+};
+
+#define FREEZE_CHANNEL_NUM		(4)
+
+typedef enum {
+	FREEZE_CTRL_FROZEN = 0,
+	FREEZE_CTRL_THAWED = 1
+} FREEZE_CTRL_CHAN_STATE;
+
+#define SYSMGR_FRZCTRL_ADDRESS 0x40
+#define SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW 0x0
+#define SYSMGR_FRZCTRL_SRC_VIO1_ENUM_HW 0x1
+#define SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK 0x00000010
+#define SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK 0x00000008
+#define SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK 0x00000004
+#define SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK 0x00000002
+#define SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK 0x00000010
+#define SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK 0x00000008
+#define SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK 0x00000004
+#define SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK 0x00000002
+#define SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK 0x00000080
+#define SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK 0x00000040
+#define SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK 0x00000100
+#define SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK 0x00000020
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1REQ_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_FROZEN 0x2
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_THAWED 0x1
+
+void sys_mgr_frzctrl_freeze_req(void);
+void sys_mgr_frzctrl_thaw_req(void);
+
+#endif /* _FREEZE_CONTROLLER_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/gpio.h
new file mode 100644
index 000000000..f216b8033
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/gpio.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#ifndef _SOCFPGA_GPIO_H
+#define _SOCFPGA_GPIO_H
+
+#endif /* _SOCFPGA_GPIO_H */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/handoff_soc64.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/handoff_soc64.h
new file mode 100644
index 000000000..3750216a9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/handoff_soc64.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2016-2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef _HANDOFF_SOC64_H_
+#define _HANDOFF_SOC64_H_
+
+/*
+ * Offset for HW handoff from Quartus tools
+ */
+/* HPS handoff */
+#define SOC64_HANDOFF_MAGIC_BOOT	0x424F4F54
+#define SOC64_HANDOFF_MAGIC_MUX	0x504D5558
+#define SOC64_HANDOFF_MAGIC_IOCTL	0x494F4354
+#define SOC64_HANDOFF_MAGIC_FPGA	0x46504741
+#define SOC64_HANDOFF_MAGIC_DELAY	0x444C4159
+#define SOC64_HANDOFF_MAGIC_CLOCK	0x434C4B53
+#define SOC64_HANDOFF_MAGIC_MISC	0x4D495343
+
+#define SOC64_HANDOFF_OFFSET_LENGTH	0x4
+#define SOC64_HANDOFF_OFFSET_DATA	0x10
+#define SOC64_HANDOFF_SIZE		4096
+
+#define SOC64_HANDOFF_BASE		0xFFE3F000
+#define SOC64_HANDOFF_MISC		(SOC64_HANDOFF_BASE + 0x610)
+#define SOC64_HANDOFF_MUX		(SOC64_HANDOFF_BASE + 0x10)
+#define SOC64_HANDOFF_IOCTL		(SOC64_HANDOFF_BASE + 0x1A0)
+#define SOC64_HANDOFF_FPGA		(SOC64_HANDOFF_BASE + 0x330)
+#define SOC64_HANDOFF_DELAY		(SOC64_HANDOFF_BASE + 0x3F0)
+#define SOC64_HANDOFF_CLOCK		(SOC64_HANDOFF_BASE + 0x580)
+
+#if IS_ENABLED(CONFIG_TARGET_SOCFPGA_STRATIX10)
+#define SOC64_HANDOFF_CLOCK_OSC	(SOC64_HANDOFF_BASE + 0x608)
+#define SOC64_HANDOFF_CLOCK_FPGA	(SOC64_HANDOFF_BASE + 0x60C)
+#else
+#define SOC64_HANDOFF_CLOCK_OSC	(SOC64_HANDOFF_BASE + 0x5fc)
+#define SOC64_HANDOFF_CLOCK_FPGA	(SOC64_HANDOFF_BASE + 0x600)
+#endif
+
+#define SOC64_HANDOFF_MUX_LEN			96
+#define SOC64_HANDOFF_IOCTL_LEN			96
+#if IS_ENABLED(CONFIG_TARGET_SOCFPGA_STRATIX10)
+#define SOC64_HANDOFF_FPGA_LEN			42
+#else
+#define SOC64_HANDOFF_FPGA_LEN			40
+#endif
+#define SOC64_HANDOFF_DELAY_LEN			96
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+enum endianness {
+	LITTLE_ENDIAN = 0,
+	BIG_ENDIAN
+};
+
+int socfpga_get_handoff_size(void *handoff_address, enum endianness endian);
+int socfpga_handoff_read(void *handoff_address, void *table, u32 table_len,
+			 enum endianness big_endian);
+#endif
+#endif /* _HANDOFF_SOC64_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/mailbox_s10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
new file mode 100644
index 000000000..fbaf11597
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef _MAILBOX_S10_H_
+#define _MAILBOX_S10_H_
+
+/* user define Uboot ID */
+#include <linux/bitops.h>
+#define MBOX_CLIENT_ID_UBOOT	0xB
+#define MBOX_ID_UBOOT		0x1
+
+#define MBOX_CMD_DIRECT	0
+#define MBOX_CMD_INDIRECT	1
+
+#define MBOX_MAX_CMD_INDEX	2047
+#define MBOX_CMD_BUFFER_SIZE	32
+#define MBOX_RESP_BUFFER_SIZE	16
+
+#define MBOX_HDR_CMD_LSB	0
+#define MBOX_HDR_CMD_MSK	(BIT(11) - 1)
+#define MBOX_HDR_I_LSB		11
+#define MBOX_HDR_I_MSK		BIT(11)
+#define MBOX_HDR_LEN_LSB	12
+#define MBOX_HDR_LEN_MSK	0x007FF000
+#define MBOX_HDR_ID_LSB		24
+#define MBOX_HDR_ID_MSK		0x0F000000
+#define MBOX_HDR_CLIENT_LSB	28
+#define MBOX_HDR_CLIENT_MSK	0xF0000000
+
+/* Interrupt flags */
+#define MBOX_FLAGS_INT_COE	BIT(0)	/* COUT update interrupt enable */
+#define MBOX_FLAGS_INT_RIE	BIT(1)	/* RIN update interrupt enable */
+#define MBOX_FLAGS_INT_UAE	BIT(8)	/* Urgent ACK interrupt enable */
+#define MBOX_ALL_INTRS		(MBOX_FLAGS_INT_COE | \
+				 MBOX_FLAGS_INT_RIE | \
+				 MBOX_FLAGS_INT_UAE)
+
+/* Status */
+#define MBOX_STATUS_UA_MSK	BIT(8)
+
+#define MBOX_CMD_HEADER(client, id, len, indirect, cmd)     \
+	((((cmd) << MBOX_HDR_CMD_LSB) & MBOX_HDR_CMD_MSK) | \
+	(((indirect) << MBOX_HDR_I_LSB) & MBOX_HDR_I_MSK) | \
+	(((len) << MBOX_HDR_LEN_LSB) & MBOX_HDR_LEN_MSK)  | \
+	(((id) << MBOX_HDR_ID_LSB) & MBOX_HDR_ID_MSK)     | \
+	(((client) << MBOX_HDR_CLIENT_LSB) & MBOX_HDR_CLIENT_MSK))
+
+#define MBOX_RESP_ERR_GET(resp)				\
+	(((resp) & MBOX_HDR_CMD_MSK) >> MBOX_HDR_CMD_LSB)
+#define MBOX_RESP_LEN_GET(resp)			\
+	(((resp) & MBOX_HDR_LEN_MSK) >> MBOX_HDR_LEN_LSB)
+#define MBOX_RESP_ID_GET(resp)				\
+	(((resp) & MBOX_HDR_ID_MSK) >> MBOX_HDR_ID_LSB)
+#define MBOX_RESP_CLIENT_GET(resp)			\
+	(((resp) & MBOX_HDR_CLIENT_MSK) >> MBOX_HDR_CLIENT_LSB)
+
+/* Response error list */
+enum ALT_SDM_MBOX_RESP_CODE {
+	/* CMD completed successfully, but check resp ARGS for any errors */
+	MBOX_RESP_STATOK = 0,
+	/* CMD is incorrectly formatted in some way */
+	MBOX_RESP_INVALID_COMMAND = 1,
+	/* BootROM Command code not undesrtood */
+	MBOX_RESP_UNKNOWN_BR = 2,
+	/* CMD code not recognized by firmware */
+	MBOX_RESP_UNKNOWN = 3,
+	/* Length setting is not a valid length for this CMD type */
+	MBOX_RESP_INVALID_LEN = 4,
+	/* Indirect setting is not valid for this CMD type */
+	MBOX_RESP_INVALID_INDIRECT_SETTING = 5,
+	/* HW source which is not allowed to send CMD type */
+	MBOX_RESP_CMD_INVALID_ON_SRC = 6,
+	/* Client with ID not associated with any running PR CMD tries to run
+	 * RECONFIG_DATA RECONFIG_STATUS and accessing QSPI / SDMMC using ID
+	 * without exclusive access
+	 */
+	MBOX_RESP_CLIENT_ID_NO_MATCH = 8,
+	/* Address provided to the system is invalid (alignment, range
+	 * permission)
+	 */
+	MBOX_RESP_INVALID_ADDR = 0x9,
+	/* Signature authentication failed */
+	MBOX_RESP_AUTH_FAIL = 0xA,
+	/* CMD timed out */
+	MBOX_RESP_TIMEOUT = 0xB,
+	/* HW (i.e. QSPI) is not ready (initialized or configured) */
+	MBOX_RESP_HW_NOT_RDY = 0xC,
+	/* Invalid license for IID registration */
+	MBOX_RESP_PUF_ACCCES_FAILED = 0x80,
+	MBOX_PUF_ENROLL_DISABLE = 0x81,
+	MBOX_RESP_PUF_ENROLL_FAIL = 0x82,
+	MBOX_RESP_PUF_RAM_TEST_FAIL = 0x83,
+	MBOX_RESP_ATTEST_CERT_GEN_FAIL = 0x84,
+	/* Operation not allowed under current security settings */
+	MBOX_RESP_NOT_ALLOWED_UNDER_SECURITY_SETTINGS = 0x85,
+	MBOX_RESP_PUF_TRNG_FAIL = 0x86,
+	MBOX_RESP_FUSE_ALREADY_BLOWN = 0x87,
+	MBOX_RESP_INVALID_SIGNATURE = 0x88,
+	MBOX_RESP_INVALID_HASH = 0x8b,
+	MBOX_RESP_INVALID_CERTIFICATE = 0x91,
+	/* Indicates that the device (FPGA or HPS) is not configured */
+	MBOX_RESP_NOT_CONFIGURED = 0x100,
+	/* Indicates that the device is busy */
+	MBOX_RESP_DEVICE_BUSY = 0x1FF,
+	/* Indicates that there is no valid response available */
+	MBOX_RESP_NO_VALID_RESP_AVAILABLE = 0x2FF,
+	/* General Error */
+	MBOX_RESP_ERROR = 0x3FF,
+};
+
+/* Mailbox command list */
+#define MBOX_RESTART		2
+#define MBOX_CONFIG_STATUS	4
+#define MBOX_RECONFIG		6
+#define MBOX_RECONFIG_MSEL	7
+#define MBOX_RECONFIG_DATA	8
+#define MBOX_RECONFIG_STATUS	9
+#define MBOX_VAB_SRC_CERT		11
+#define MBOX_QSPI_OPEN		50
+#define MBOX_QSPI_CLOSE		51
+#define MBOX_QSPI_DIRECT	59
+#define MBOX_REBOOT_HPS		71
+
+/* Mailbox registers */
+#define MBOX_CIN			0	/* command valid offset */
+#define MBOX_ROUT			4	/* response output offset */
+#define MBOX_URG			8	/* urgent command */
+#define MBOX_FLAGS			0x0c	/* interrupt enables */
+#define MBOX_COUT			0x20	/* command free offset */
+#define MBOX_RIN			0x24	/* respond valid offset */
+#define MBOX_STATUS			0x2c	/* mailbox status */
+#define MBOX_CMD_BUF			0x40	/* circular command buffer */
+#define MBOX_RESP_BUF			0xc0	/* circular response buffer */
+#define MBOX_DOORBELL_TO_SDM		0x400	/* Doorbell to SDM */
+#define MBOX_DOORBELL_FROM_SDM		0x480	/* Doorbell from SDM */
+
+/* Status and bit information returned by RECONFIG_STATUS */
+#define RECONFIG_STATUS_RESPONSE_LEN			6
+#define RECONFIG_STATUS_STATE				0
+#define RECONFIG_STATUS_PIN_STATUS			2
+#define RECONFIG_STATUS_SOFTFUNC_STATUS			3
+
+/* Macros for specifying number of arguments in mailbox command */
+#define MBOX_NUM_ARGS(n, b)				(((n) & 0xFF) << (b))
+#define MBOX_DIRECT_COUNT(n)				MBOX_NUM_ARGS((n), 0)
+#define MBOX_ARG_DESC_COUNT(n)				MBOX_NUM_ARGS((n), 8)
+#define MBOX_RESP_DESC_COUNT(n)				MBOX_NUM_ARGS((n), 16)
+
+#define MBOX_CFGSTAT_STATE_IDLE				0x00000000
+#define MBOX_CFGSTAT_STATE_CONFIG			0x10000000
+#define MBOX_CFGSTAT_STATE_FAILACK			0x08000000
+#define MBOX_CFGSTAT_STATE_ERROR_INVALID		0xf0000001
+#define MBOX_CFGSTAT_STATE_ERROR_CORRUPT		0xf0000002
+#define MBOX_CFGSTAT_STATE_ERROR_AUTH			0xf0000003
+#define MBOX_CFGSTAT_STATE_ERROR_CORE_IO		0xf0000004
+#define MBOX_CFGSTAT_STATE_ERROR_HARDWARE		0xf0000005
+#define MBOX_CFGSTAT_STATE_ERROR_FAKE			0xf0000006
+#define MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO		0xf0000007
+#define MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR		0xf0000008
+
+#define RCF_SOFTFUNC_STATUS_CONF_DONE			BIT(0)
+#define RCF_SOFTFUNC_STATUS_INIT_DONE			BIT(1)
+#define RCF_SOFTFUNC_STATUS_SEU_ERROR			BIT(3)
+#define RCF_PIN_STATUS_NSTATUS				BIT(31)
+
+int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, u8 urgent,
+		  u32 *resp_buf_len, u32 *resp_buf);
+int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
+		       u8 urgent, u32 *resp_buf_len, u32 *resp_buf);
+int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
+int mbox_send_cmd_only_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
+int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len);
+int mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len);
+int mbox_init(void);
+
+#ifdef CONFIG_CADENCE_QSPI
+int mbox_qspi_close(void);
+int mbox_qspi_open(void);
+#endif
+
+int mbox_reset_cold(void);
+int mbox_get_fpga_config_status(u32 cmd);
+int mbox_get_fpga_config_status_psci(u32 cmd);
+#endif /* _MAILBOX_S10_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/misc.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/misc.h
new file mode 100644
index 000000000..649d2f6ce
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/misc.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ */
+
+#ifndef _SOCFPGA_MISC_H_
+#define _SOCFPGA_MISC_H_
+
+#include <asm/sections.h>
+
+void dwmac_deassert_reset(const unsigned int of_reset_id, const u32 phymode);
+
+struct bsel {
+	const char	*mode;
+	const char	*name;
+};
+
+extern struct bsel bsel_str[];
+
+#ifdef CONFIG_FPGA
+void socfpga_fpga_add(void *fpga_desc);
+#else
+static inline void socfpga_fpga_add(void *fpga_desc) {}
+#endif
+
+#ifdef CONFIG_TARGET_SOCFPGA_GEN5
+void socfpga_sdram_remap_zero(void);
+static inline bool socfpga_is_booting_from_fpga(void)
+{
+	if ((__image_copy_start >= (char *)SOCFPGA_FPGA_SLAVES_ADDRESS) &&
+	    (__image_copy_start < (char *)SOCFPGA_STM_ADDRESS))
+		return true;
+	return false;
+}
+#endif
+
+#ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
+void socfpga_init_security_policies(void);
+void socfpga_sdram_remap_zero(void);
+#endif
+
+#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10) || \
+	defined(CONFIG_TARGET_SOCFPGA_AGILEX)
+int is_fpga_config_ready(void);
+#endif
+
+void do_bridge_reset(int enable, unsigned int mask);
+void socfpga_pl310_clear(void);
+void socfpga_get_managers_addr(void);
+
+#endif /* _SOCFPGA_MISC_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/nic301.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/nic301.h
new file mode 100644
index 000000000..20bebb8c8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/nic301.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#ifndef	_NIC301_REGISTERS_H_
+#define	_NIC301_REGISTERS_H_
+
+struct nic301_registers {
+	u32	remap;				/* 0x0 */
+	/* Security Register Group */
+	u32	_pad_0x4_0x8[1];
+	u32	l4main;
+	u32	l4sp;
+	u32	l4mp;				/* 0x10 */
+	u32	l4osc1;
+	u32	l4spim;
+	u32	stm;
+	u32	lwhps2fpgaregs;			/* 0x20 */
+	u32	_pad_0x24_0x28[1];
+	u32	usb1;
+	u32	nanddata;
+	u32	_pad_0x30_0x80[20];
+	u32	usb0;				/* 0x80 */
+	u32	nandregs;
+	u32	qspidata;
+	u32	fpgamgrdata;
+	u32	hps2fpgaregs;			/* 0x90 */
+	u32	acp;
+	u32	rom;
+	u32	ocram;
+	u32	sdrdata;			/* 0xA0 */
+	u32	_pad_0xa4_0x1fd0[1995];
+	/* ID Register Group */
+	u32	periph_id_4;			/* 0x1FD0 */
+	u32	_pad_0x1fd4_0x1fe0[3];
+	u32	periph_id_0;			/* 0x1FE0 */
+	u32	periph_id_1;
+	u32	periph_id_2;
+	u32	periph_id_3;
+	u32	comp_id_0;			/* 0x1FF0 */
+	u32	comp_id_1;
+	u32	comp_id_2;
+	u32	comp_id_3;
+	u32	_pad_0x2000_0x2008[2];
+	/* L4 MAIN */
+	u32	l4main_fn_mod_bm_iss;
+	u32	_pad_0x200c_0x3008[1023];
+	/* L4 SP */
+	u32	l4sp_fn_mod_bm_iss;
+	u32	_pad_0x300c_0x4008[1023];
+	/* L4 MP */
+	u32	l4mp_fn_mod_bm_iss;
+	u32	_pad_0x400c_0x5008[1023];
+	/* L4 OSC1 */
+	u32	l4osc_fn_mod_bm_iss;
+	u32	_pad_0x500c_0x6008[1023];
+	/* L4 SPIM */
+	u32	l4spim_fn_mod_bm_iss;
+	u32	_pad_0x600c_0x7008[1023];
+	/* STM */
+	u32	stm_fn_mod_bm_iss;
+	u32	_pad_0x700c_0x7108[63];
+	u32	stm_fn_mod;
+	u32	_pad_0x710c_0x8008[959];
+	/* LWHPS2FPGA */
+	u32	lwhps2fpga_fn_mod_bm_iss;
+	u32	_pad_0x800c_0x8108[63];
+	u32	lwhps2fpga_fn_mod;
+	u32	_pad_0x810c_0xa008[1983];
+	/* USB1 */
+	u32	usb1_fn_mod_bm_iss;
+	u32	_pad_0xa00c_0xa044[14];
+	u32	usb1_ahb_cntl;
+	u32	_pad_0xa048_0xb008[1008];
+	/* NANDDATA */
+	u32	nanddata_fn_mod_bm_iss;
+	u32	_pad_0xb00c_0xb108[63];
+	u32	nanddata_fn_mod;
+	u32	_pad_0xb10c_0x20008[21439];
+	/* USB0 */
+	u32	usb0_fn_mod_bm_iss;
+	u32	_pad_0x2000c_0x20044[14];
+	u32	usb0_ahb_cntl;
+	u32	_pad_0x20048_0x21008[1008];
+	/* NANDREGS */
+	u32	nandregs_fn_mod_bm_iss;
+	u32	_pad_0x2100c_0x21108[63];
+	u32	nandregs_fn_mod;
+	u32	_pad_0x2110c_0x22008[959];
+	/* QSPIDATA */
+	u32	qspidata_fn_mod_bm_iss;
+	u32	_pad_0x2200c_0x22044[14];
+	u32	qspidata_ahb_cntl;
+	u32	_pad_0x22048_0x23008[1008];
+	/* FPGAMGRDATA */
+	u32	fpgamgrdata_fn_mod_bm_iss;
+	u32	_pad_0x2300c_0x23040[13];
+	u32	fpgamgrdata_wr_tidemark;	/* 0x23040 */
+	u32	_pad_0x23044_0x23108[49];
+	u32	fn_mod;
+	u32	_pad_0x2310c_0x24008[959];
+	/* HPS2FPGA */
+	u32	hps2fpga_fn_mod_bm_iss;
+	u32	_pad_0x2400c_0x24040[13];
+	u32	hps2fpga_wr_tidemark;		/* 0x24040 */
+	u32	_pad_0x24044_0x24108[49];
+	u32	hps2fpga_fn_mod;
+	u32	_pad_0x2410c_0x25008[959];
+	/* ACP */
+	u32	acp_fn_mod_bm_iss;
+	u32	_pad_0x2500c_0x25108[63];
+	u32	acp_fn_mod;
+	u32	_pad_0x2510c_0x26008[959];
+	/* Boot ROM */
+	u32	bootrom_fn_mod_bm_iss;
+	u32	_pad_0x2600c_0x26108[63];
+	u32	bootrom_fn_mod;
+	u32	_pad_0x2610c_0x27008[959];
+	/* On-chip RAM */
+	u32	ocram_fn_mod_bm_iss;
+	u32	_pad_0x2700c_0x27040[13];
+	u32	ocram_wr_tidemark;		/* 0x27040 */
+	u32	_pad_0x27044_0x27108[49];
+	u32	ocram_fn_mod;
+	u32	_pad_0x2710c_0x42024[27590];
+	/* DAP */
+	u32	dap_fn_mod2;
+	u32	dap_fn_mod_ahb;
+	u32	_pad_0x4202c_0x42100[53];
+	u32	dap_read_qos;			/* 0x42100 */
+	u32	dap_write_qos;
+	u32	dap_fn_mod;
+	u32	_pad_0x4210c_0x43100[1021];
+	/* MPU */
+	u32	mpu_read_qos;			/* 0x43100 */
+	u32	mpu_write_qos;
+	u32	mpu_fn_mod;
+	u32	_pad_0x4310c_0x44028[967];
+	/* SDMMC */
+	u32	sdmmc_fn_mod_ahb;
+	u32	_pad_0x4402c_0x44100[53];
+	u32	sdmmc_read_qos;			/* 0x44100 */
+	u32	sdmmc_write_qos;
+	u32	sdmmc_fn_mod;
+	u32	_pad_0x4410c_0x45100[1021];
+	/* DMA */
+	u32	dma_read_qos;			/* 0x45100 */
+	u32	dma_write_qos;
+	u32	dma_fn_mod;
+	u32	_pad_0x4510c_0x46040[973];
+	/* FPGA2HPS */
+	u32	fpga2hps_wr_tidemark;		/* 0x46040 */
+	u32	_pad_0x46044_0x46100[47];
+	u32	fpga2hps_read_qos;		/* 0x46100 */
+	u32	fpga2hps_write_qos;
+	u32	fpga2hps_fn_mod;
+	u32	_pad_0x4610c_0x47100[1021];
+	/* ETR */
+	u32	etr_read_qos;			/* 0x47100 */
+	u32	etr_write_qos;
+	u32	etr_fn_mod;
+	u32	_pad_0x4710c_0x48100[1021];
+	/* EMAC0 */
+	u32	emac0_read_qos;			/* 0x48100 */
+	u32	emac0_write_qos;
+	u32	emac0_fn_mod;
+	u32	_pad_0x4810c_0x49100[1021];
+	/* EMAC1 */
+	u32	emac1_read_qos;			/* 0x49100 */
+	u32	emac1_write_qos;
+	u32	emac1_fn_mod;
+	u32	_pad_0x4910c_0x4a028[967];
+	/* USB0 */
+	u32	usb0_fn_mod_ahb;
+	u32	_pad_0x4a02c_0x4a100[53];
+	u32	usb0_read_qos;			/* 0x4A100 */
+	u32	usb0_write_qos;
+	u32	usb0_fn_mod;
+	u32	_pad_0x4a10c_0x4b100[1021];
+	/* NAND */
+	u32	nand_read_qos;			/* 0x4B100 */
+	u32	nand_write_qos;
+	u32	nand_fn_mod;
+	u32	_pad_0x4b10c_0x4c028[967];
+	/* USB1 */
+	u32	usb1_fn_mod_ahb;
+	u32	_pad_0x4c02c_0x4c100[53];
+	u32	usb1_read_qos;			/* 0x4C100 */
+	u32	usb1_write_qos;
+	u32	usb1_fn_mod;
+};
+
+#endif	/* _NIC301_REGISTERS_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/pinmux.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/pinmux.h
new file mode 100644
index 000000000..2de5033b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/pinmux.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
+ */
+
+#ifndef _PINMUX_H_
+#define _PINMUX_H_
+
+#define PINMUX_UART		0xD
+
+#ifndef __ASSEMBLY__
+int config_dedicated_pins(const void *blob);
+int config_pins(const void *blob, const char *pin_grp);
+#endif
+
+#endif /* _PINMUX_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager.h
new file mode 100644
index 000000000..1d68034cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _RESET_MANAGER_H_
+#define _RESET_MANAGER_H_
+
+phys_addr_t socfpga_get_rstmgr_addr(void);
+
+void reset_cpu(void);
+
+void socfpga_per_reset(u32 reset, int set);
+void socfpga_per_reset_all(void);
+
+#define RSTMGR_CTRL_SWCOLDRSTREQ_LSB 0
+#define RSTMGR_CTRL_SWWARMRSTREQ_LSB 1
+
+/*
+ * Define a reset identifier, from which a permodrst bank ID
+ * and reset ID can be extracted using the subsequent macros
+ * RSTMGR_RESET() and RSTMGR_BANK().
+ */
+#define RSTMGR_BANK_OFFSET	8
+#define RSTMGR_BANK_MASK	0x7
+#define RSTMGR_RESET_OFFSET	0
+#define RSTMGR_RESET_MASK	0x1f
+#define RSTMGR_DEFINE(_bank, _offset)		\
+	((_bank) << RSTMGR_BANK_OFFSET) | ((_offset) << RSTMGR_RESET_OFFSET)
+
+/* Extract reset ID from the reset identifier. */
+#define RSTMGR_RESET(_reset)			\
+	(((_reset) >> RSTMGR_RESET_OFFSET) & RSTMGR_RESET_MASK)
+
+/* Extract bank ID from the reset identifier. */
+#define RSTMGR_BANK(_reset)			\
+	(((_reset) >> RSTMGR_BANK_OFFSET) & RSTMGR_BANK_MASK)
+
+/* Create a human-readable reference to SoCFPGA reset. */
+#define SOCFPGA_RESET(_name)	RSTMGR_##_name
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/reset_manager_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/reset_manager_arria10.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_SOC64)
+#include <asm/arch/reset_manager_soc64.h>
+#endif
+
+#endif /* _RESET_MANAGER_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
new file mode 100644
index 000000000..19507c292
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ */
+
+#ifndef _RESET_MANAGER_ARRIA10_H_
+#define _RESET_MANAGER_ARRIA10_H_
+
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+#include <linux/bitops.h>
+
+void socfpga_watchdog_disable(void);
+void socfpga_reset_deassert_noc_ddr_scheduler(void);
+int socfpga_reset_deassert_bridges_handoff(void);
+void socfpga_reset_deassert_osc1wd0(void);
+int socfpga_bridges_reset(void);
+
+#define RSTMGR_A10_STATUS	0x00
+#define RSTMGR_A10_CTRL		0x0c
+#define RSTMGR_A10_MPUMODRST	0x20
+#define RSTMGR_A10_PER0MODRST	0x24
+#define RSTMGR_A10_PER1MODRST	0x28
+#define RSTMGR_A10_BRGMODRST	0x2c
+#define RSTMGR_A10_SYSMODRST	0x30
+
+#define RSTMGR_CTRL		RSTMGR_A10_CTRL
+
+/*
+ * SocFPGA Arria10 reset IDs, bank mapping is as follows:
+ * 0 ... mpumodrst
+ * 1 ... per0modrst
+ * 2 ... per1modrst
+ * 3 ... brgmodrst
+ * 4 ... sysmodrst
+ */
+#define RSTMGR_EMAC0		RSTMGR_DEFINE(1, 0)
+#define RSTMGR_EMAC1		RSTMGR_DEFINE(1, 1)
+#define RSTMGR_EMAC2		RSTMGR_DEFINE(1, 2)
+#define RSTMGR_NAND		RSTMGR_DEFINE(1, 5)
+#define RSTMGR_QSPI		RSTMGR_DEFINE(1, 6)
+#define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 7)
+#define RSTMGR_DMA		RSTMGR_DEFINE(1, 16)
+#define RSTMGR_SPIM0		RSTMGR_DEFINE(1, 17)
+#define RSTMGR_SPIM1		RSTMGR_DEFINE(1, 18)
+#define RSTMGR_L4WD0		RSTMGR_DEFINE(2, 0)
+#define RSTMGR_L4WD1		RSTMGR_DEFINE(2, 1)
+#define RSTMGR_L4SYSTIMER0	RSTMGR_DEFINE(2, 2)
+#define RSTMGR_L4SYSTIMER1	RSTMGR_DEFINE(2, 3)
+#define RSTMGR_SPTIMER0		RSTMGR_DEFINE(2, 4)
+#define RSTMGR_SPTIMER1		RSTMGR_DEFINE(2, 5)
+#define RSTMGR_UART0		RSTMGR_DEFINE(2, 16)
+#define RSTMGR_UART1		RSTMGR_DEFINE(2, 17)
+#define RSTMGR_DDRSCH		RSTMGR_DEFINE(3, 6)
+
+#define ALT_RSTMGR_CTL_SWWARMRSTREQ_SET_MSK	BIT(1)
+#define ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK	BIT(0)
+#define ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK	BIT(1)
+#define ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK	BIT(2)
+#define ALT_RSTMGR_PER0MODRST_USB0_SET_MSK	BIT(3)
+#define ALT_RSTMGR_PER0MODRST_USB1_SET_MSK	BIT(4)
+#define ALT_RSTMGR_PER0MODRST_NAND_SET_MSK	BIT(5)
+#define ALT_RSTMGR_PER0MODRST_QSPI_SET_MSK	BIT(6)
+#define ALT_RSTMGR_PER0MODRST_SDMMC_SET_MSK	BIT(7)
+#define ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK	BIT(8)
+#define ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK	BIT(9)
+#define ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK	BIT(10)
+#define ALT_RSTMGR_PER0MODRST_USBECC0_SET_MSK	BIT(11)
+#define ALT_RSTMGR_PER0MODRST_USBECC1_SET_MSK	BIT(12)
+#define ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK	BIT(13)
+#define ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK	BIT(14)
+#define ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK	BIT(15)
+#define ALT_RSTMGR_PER0MODRST_DMA_SET_MSK	BIT(16)
+#define ALT_RSTMGR_PER0MODRST_SPIM0_SET_MSK	BIT(17)
+#define ALT_RSTMGR_PER0MODRST_SPIM1_SET_MSK	BIT(18)
+#define ALT_RSTMGR_PER0MODRST_SPIS0_SET_MSK	BIT(19)
+#define ALT_RSTMGR_PER0MODRST_SPIS1_SET_MSK	BIT(20)
+#define ALT_RSTMGR_PER0MODRST_DMAECC_SET_MSK	BIT(21)
+#define ALT_RSTMGR_PER0MODRST_EMACPTP_SET_MSK	BIT(22)
+#define ALT_RSTMGR_PER0MODRST_DMAIF0_SET_MSK	BIT(24)
+#define ALT_RSTMGR_PER0MODRST_DMAIF1_SET_MSK	BIT(25)
+#define ALT_RSTMGR_PER0MODRST_DMAIF2_SET_MSK	BIT(26)
+#define ALT_RSTMGR_PER0MODRST_DMAIF3_SET_MSK	BIT(27)
+#define ALT_RSTMGR_PER0MODRST_DMAIF4_SET_MSK	BIT(28)
+#define ALT_RSTMGR_PER0MODRST_DMAIF5_SET_MSK	BIT(29)
+#define ALT_RSTMGR_PER0MODRST_DMAIF6_SET_MSK	BIT(30)
+#define ALT_RSTMGR_PER0MODRST_DMAIF7_SET_MSK	BIT(31)
+
+#define ALT_RSTMGR_PER1MODRST_WD0_SET_MSK	BIT(0)
+#define ALT_RSTMGR_PER1MODRST_WD1_SET_MSK	BIT(1)
+#define ALT_RSTMGR_PER1MODRST_L4SYSTMR0_SET_MSK	BIT(2)
+#define ALT_RSTMGR_PER1MODRST_L4SYSTMR1_SET_MSK	BIT(3)
+#define ALT_RSTMGR_PER1MODRST_SPTMR0_SET_MSK	BIT(4)
+#define ALT_RSTMGR_PER1MODRST_SPTMR1_SET_MSK	BIT(5)
+#define ALT_RSTMGR_PER1MODRST_I2C0_SET_MSK	BIT(8)
+#define ALT_RSTMGR_PER1MODRST_I2C1_SET_MSK	BIT(9)
+#define ALT_RSTMGR_PER1MODRST_I2C2_SET_MSK	BIT(10)
+#define ALT_RSTMGR_PER1MODRST_I2C3_SET_MSK	BIT(11)
+#define ALT_RSTMGR_PER1MODRST_I2C4_SET_MSK	BIT(12)
+#define ALT_RSTMGR_PER1MODRST_UART0_SET_MSK	BIT(16)
+#define ALT_RSTMGR_PER1MODRST_UART1_SET_MSK	BIT(17)
+#define ALT_RSTMGR_PER1MODRST_GPIO0_SET_MSK	BIT(24)
+#define ALT_RSTMGR_PER1MODRST_GPIO1_SET_MSK	BIT(25)
+#define ALT_RSTMGR_PER1MODRST_GPIO2_SET_MSK	BIT(26)
+
+#define ALT_RSTMGR_BRGMODRST_H2F_SET_MSK	BIT(0)
+#define ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK	BIT(1)
+#define ALT_RSTMGR_BRGMODRST_F2H_SET_MSK	BIT(2)
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK	BIT(3)
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK	BIT(4)
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK	BIT(5)
+#define ALT_RSTMGR_BRGMODRST_DDRSCH_SET_MSK	BIT(6)
+
+#define ALT_RSTMGR_HDSKEN_SDRSELFREFEN_SET_MSK	BIT(0)
+#define ALT_RSTMGR_HDSKEN_FPGAMGRHSEN_SET_MSK	BIT(1)
+#define ALT_RSTMGR_HDSKEN_FPGAHSEN_SET_MSK	BIT(2)
+#define ALT_RSTMGR_HDSKEN_ETRSTALLEN_SET_MSK	BIT(3)
+
+#endif /* _RESET_MANAGER_ARRIA10_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_gen5.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_gen5.h
new file mode 100644
index 000000000..d108eac1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_gen5.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _RESET_MANAGER_GEN5_H_
+#define _RESET_MANAGER_GEN5_H_
+
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+void socfpga_bridges_set_handoff_regs(bool h2f, bool lwh2f, bool f2h);
+void socfpga_bridges_reset(int enable);
+
+#define RSTMGR_GEN5_STATUS	0x00
+#define RSTMGR_GEN5_CTRL	0x04
+#define RSTMGR_GEN5_MPUMODRST	0x10
+#define RSTMGR_GEN5_PERMODRST	0x14
+#define RSTMGR_GEN5_PER2MODRST	0x18
+#define RSTMGR_GEN5_BRGMODRST	0x1c
+#define RSTMGR_GEN5_MISCMODRST	0x20
+
+#define RSTMGR_CTRL		RSTMGR_GEN5_CTRL
+
+/*
+ * SocFPGA Cyclone V/Arria V reset IDs, bank mapping is as follows:
+ * 0 ... mpumodrst
+ * 1 ... permodrst
+ * 2 ... per2modrst
+ * 3 ... brgmodrst
+ * 4 ... miscmodrst
+ */
+#define RSTMGR_EMAC0		RSTMGR_DEFINE(1, 0)
+#define RSTMGR_EMAC1		RSTMGR_DEFINE(1, 1)
+#define RSTMGR_NAND		RSTMGR_DEFINE(1, 4)
+#define RSTMGR_QSPI		RSTMGR_DEFINE(1, 5)
+#define RSTMGR_L4WD0		RSTMGR_DEFINE(1, 6)
+#define RSTMGR_OSC1TIMER0	RSTMGR_DEFINE(1, 8)
+#define RSTMGR_UART0		RSTMGR_DEFINE(1, 16)
+#define RSTMGR_SPIM0		RSTMGR_DEFINE(1, 18)
+#define RSTMGR_SPIM1		RSTMGR_DEFINE(1, 19)
+#define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 22)
+#define RSTMGR_DMA		RSTMGR_DEFINE(1, 28)
+#define RSTMGR_SDR		RSTMGR_DEFINE(1, 29)
+
+#endif /* _RESET_MANAGER_GEN5_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h
new file mode 100644
index 000000000..c8bb727aa
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2016-2019 Intel Corporation <www.intel.com>
+ */
+
+#ifndef _RESET_MANAGER_SOC64_H_
+#define _RESET_MANAGER_SOC64_H_
+
+void reset_deassert_peripherals_handoff(void);
+int cpu_has_been_warmreset(void);
+void print_reset_info(void);
+void socfpga_bridges_reset(int enable);
+
+#define RSTMGR_SOC64_STATUS	0x00
+#define RSTMGR_SOC64_MPUMODRST	0x20
+#define RSTMGR_SOC64_PER0MODRST	0x24
+#define RSTMGR_SOC64_PER1MODRST	0x28
+#define RSTMGR_SOC64_BRGMODRST	0x2c
+
+#define RSTMGR_MPUMODRST_CORE0		0
+#define RSTMGR_PER0MODRST_OCP_MASK	0x0020bf00
+#define RSTMGR_BRGMODRST_DDRSCH_MASK	0X00000040
+#define RSTMGR_BRGMODRST_FPGA2SOC_MASK	0x00000004
+
+/* SDM, Watchdogs and MPU warm reset mask */
+#define RSTMGR_STAT_SDMWARMRST		BIT(1)
+#define RSTMGR_STAT_MPU0RST_BITPOS	8
+#define RSTMGR_STAT_L4WD0RST_BITPOS	16
+#define RSTMGR_L4WD_MPU_WARMRESET_MASK	(RSTMGR_STAT_SDMWARMRST | \
+		GENMASK(RSTMGR_STAT_MPU0RST_BITPOS + 3, \
+			RSTMGR_STAT_MPU0RST_BITPOS) | \
+		GENMASK(RSTMGR_STAT_L4WD0RST_BITPOS + 3, \
+			RSTMGR_STAT_L4WD0RST_BITPOS))
+
+/*
+ * SocFPGA Stratix10 reset IDs, bank mapping is as follows:
+ * 0 ... mpumodrst
+ * 1 ... per0modrst
+ * 2 ... per1modrst
+ * 3 ... brgmodrst
+ */
+#define RSTMGR_L4WD0		RSTMGR_DEFINE(2, 0)
+#define RSTMGR_OSC1TIMER0	RSTMGR_DEFINE(2, 4)
+#define RSTMGR_UART0		RSTMGR_DEFINE(2, 16)
+
+#endif /* _RESET_MANAGER_SOC64_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/scan_manager.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/scan_manager.h
new file mode 100644
index 000000000..4d8d649be
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/scan_manager.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+#ifndef	_SCAN_MANAGER_H_
+#define	_SCAN_MANAGER_H_
+
+struct socfpga_scan_manager {
+	u32	stat;
+	u32	en;
+	u32	padding[2];
+	u32	fifo_single_byte;
+	u32	fifo_double_byte;
+	u32	fifo_triple_byte;
+	u32	fifo_quad_byte;
+};
+
+int scan_mgr_configure_iocsr(void);
+u32 scan_mgr_get_fpga_id(void);
+int iocsr_get_config_table(const unsigned int chain_id,
+			   const unsigned long **table,
+			   unsigned int *table_len);
+
+#endif /* _SCAN_MANAGER_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/scu.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/scu.h
new file mode 100644
index 000000000..b684a5501
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/scu.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#ifndef __SOCFPGA_SCU_H__
+#define __SOCFPGA_SCU_H__
+
+struct scu_registers {
+	u32	ctrl;			/* 0x00 */
+	u32	cfg;
+	u32	cpsr;
+	u32	iassr;
+	u32	_pad_0x10_0x3c[12];	/* 0x10 */
+	u32	fsar;			/* 0x40 */
+	u32	fear;
+	u32	_pad_0x48_0x4c[2];
+	u32	acr;			/* 0x50 */
+	u32	sacr;
+};
+
+#endif	/* __SOCFPGA_SCU_H__ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram.h
new file mode 100644
index 000000000..79cb9e606
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright Altera Corporation (C) 2014-2015
+ */
+#ifndef	_SDRAM_H_
+#define	_SDRAM_H_
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/sdram_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/sdram_arria10.h>
+#endif
+
+#endif
+#endif /* _SDRAM_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram_arria10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
new file mode 100644
index 000000000..ff05994cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
@@ -0,0 +1,382 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2015-2017 Intel Corporation <www.intel.com>
+ */
+
+#ifndef _SOCFPGA_SDRAM_ARRIA10_H_
+#define _SOCFPGA_SDRAM_ARRIA10_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+int ddr_calibration_sequence(void);
+
+struct socfpga_ecc_hmc {
+	u32 ip_rev_id;
+	u32 _pad_0x4_0x7;
+	u32 ddrioctrl;
+	u32 ddrcalstat;
+	u32 mpr_0beat1;
+	u32 mpr_1beat1;
+	u32 mpr_2beat1;
+	u32 mpr_3beat1;
+	u32 mpr_4beat1;
+	u32 mpr_5beat1;
+	u32 mpr_6beat1;
+	u32 mpr_7beat1;
+	u32 mpr_8beat1;
+	u32 mpr_0beat2;
+	u32 mpr_1beat2;
+	u32 mpr_2beat2;
+	u32 mpr_3beat2;
+	u32 mpr_4beat2;
+	u32 mpr_5beat2;
+	u32 mpr_6beat2;
+	u32 mpr_7beat2;
+	u32 mpr_8beat2;
+	u32 _pad_0x58_0x5f[2];
+	u32 auto_precharge;
+	u32 _pad_0x64_0xff[39];
+	u32 eccctrl;
+	u32 eccctrl2;
+	u32 _pad_0x108_0x10f[2];
+	u32 errinten;
+	u32 errintens;
+	u32 errintenr;
+	u32 intmode;
+	u32 intstat;
+	u32 diaginttest;
+	u32 modstat;
+	u32 derraddra;
+	u32 serraddra;
+	u32 _pad_0x134_0x137;
+	u32 autowb_corraddr;
+	u32 serrcntreg;
+	u32 autowb_drop_cntreg;
+	u32 _pad_0x144_0x147;
+	u32 ecc_reg2wreccdatabus;
+	u32 ecc_rdeccdata2regbus;
+	u32 ecc_reg2rdeccdatabus;
+	u32 _pad_0x154_0x15f[3];
+	u32 ecc_diagon;
+	u32 ecc_decstat;
+	u32 _pad_0x168_0x16f[2];
+	u32 ecc_errgenaddr_0;
+	u32 ecc_errgenaddr_1;
+	u32 ecc_errgenaddr_2;
+	u32 ecc_errgenaddr_3;
+};
+
+struct socfpga_noc_ddr_scheduler {
+	u32 ddr_t_main_scheduler_id_coreid;
+	u32 ddr_t_main_scheduler_id_revisionid;
+	u32 ddr_t_main_scheduler_ddrconf;
+	u32 ddr_t_main_scheduler_ddrtiming;
+	u32 ddr_t_main_scheduler_ddrmode;
+	u32 ddr_t_main_scheduler_readlatency;
+	u32 _pad_0x20_0x34[8];
+	u32 ddr_t_main_scheduler_activate;
+	u32 ddr_t_main_scheduler_devtodev;
+};
+
+/*
+ * OCRAM firewall
+ */
+struct socfpga_noc_fw_ocram {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 region0;
+	u32 region1;
+	u32 region2;
+	u32 region3;
+	u32 region4;
+	u32 region5;
+};
+
+/* for master such as MPU and FPGA */
+struct socfpga_noc_fw_ddr_mpu_fpga2sdram {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 _pad_0xc_0xf;
+	u32 mpuregion0addr;
+	u32 mpuregion1addr;
+	u32 mpuregion2addr;
+	u32 mpuregion3addr;
+	u32 fpga2sdram0region0addr;
+	u32 fpga2sdram0region1addr;
+	u32 fpga2sdram0region2addr;
+	u32 fpga2sdram0region3addr;
+	u32 fpga2sdram1region0addr;
+	u32 fpga2sdram1region1addr;
+	u32 fpga2sdram1region2addr;
+	u32 fpga2sdram1region3addr;
+	u32 fpga2sdram2region0addr;
+	u32 fpga2sdram2region1addr;
+	u32 fpga2sdram2region2addr;
+	u32 fpga2sdram2region3addr;
+};
+
+/* for L3 master */
+struct socfpga_noc_fw_ddr_l3 {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 hpsregion0addr;
+	u32 hpsregion1addr;
+	u32 hpsregion2addr;
+	u32 hpsregion3addr;
+	u32 hpsregion4addr;
+	u32 hpsregion5addr;
+	u32 hpsregion6addr;
+	u32 hpsregion7addr;
+};
+
+struct socfpga_io48_mmr {
+	u32 dbgcfg0;
+	u32 dbgcfg1;
+	u32 dbgcfg2;
+	u32 dbgcfg3;
+	u32 dbgcfg4;
+	u32 dbgcfg5;
+	u32 dbgcfg6;
+	u32 reserve0;
+	u32 reserve1;
+	u32 reserve2;
+	u32 ctrlcfg0;
+	u32 ctrlcfg1;
+	u32 ctrlcfg2;
+	u32 ctrlcfg3;
+	u32 ctrlcfg4;
+	u32 ctrlcfg5;
+	u32 ctrlcfg6;
+	u32 ctrlcfg7;
+	u32 ctrlcfg8;
+	u32 ctrlcfg9;
+	u32 dramtiming0;
+	u32 dramodt0;
+	u32 dramodt1;
+	u32 sbcfg0;
+	u32 sbcfg1;
+	u32 sbcfg2;
+	u32 sbcfg3;
+	u32 sbcfg4;
+	u32 sbcfg5;
+	u32 sbcfg6;
+	u32 sbcfg7;
+	u32 caltiming0;
+	u32 caltiming1;
+	u32 caltiming2;
+	u32 caltiming3;
+	u32 caltiming4;
+	u32 caltiming5;
+	u32 caltiming6;
+	u32 caltiming7;
+	u32 caltiming8;
+	u32 caltiming9;
+	u32 caltiming10;
+	u32 dramaddrw;
+	u32 sideband0;
+	u32 sideband1;
+	u32 sideband2;
+	u32 sideband3;
+	u32 sideband4;
+	u32 sideband5;
+	u32 sideband6;
+	u32 sideband7;
+	u32 sideband8;
+	u32 sideband9;
+	u32 sideband10;
+	u32 sideband11;
+	u32 sideband12;
+	u32 sideband13;
+	u32 sideband14;
+	u32 sideband15;
+	u32 dramsts;
+	u32 dbgdone;
+	u32 dbgsignals;
+	u32 dbgreset;
+	u32 dbgmatch;
+	u32 counter0mask;
+	u32 counter1mask;
+	u32 counter0match;
+	u32 counter1match;
+	u32 niosreserve0;
+	u32 niosreserve1;
+	u32 niosreserve2;
+};
+
+#endif /*__ASSEMBLY__ */
+
+#define IO48_MMR_CTRLCFG0_DB2_BURST_LENGTH_MASK		0x1F000000
+#define IO48_MMR_CTRLCFG0_DB2_BURST_LENGTH_SHIFT	24
+#define IO48_MMR_CTRLCFG0_DB1_BURST_LENGTH_MASK		0x00F80000
+#define IO48_MMR_CTRLCFG0_DB1_BURST_LENGTH_SHIFT	19
+#define IO48_MMR_CTRLCFG0_DB0_BURST_LENGTH_MASK		0x0007C000
+#define IO48_MMR_CTRLCFG0_DB0_BURST_LENGTH_SHIFT	14
+#define IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_MASK	0x00003E00
+#define IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_SHIFT	9
+#define IO48_MMR_CTRLCFG0_AC_POS_MASK			0x00000180
+#define IO48_MMR_CTRLCFG0_AC_POS_SHIFT			7
+#define IO48_MMR_CTRLCFG0_DIMM_TYPE_MASK		0x00000070
+#define IO48_MMR_CTRLCFG0_DIM_TYPE_SHIFT		4
+#define IO48_MMR_CTRLCFG0_MEM_TYPE_MASK			0x0000000F
+#define IO48_MMR_CTRLCFG0_MEM_TYPE_SHIFT		0
+
+#define IO48_MMR_CTRLCFG1_DBC3_ENABLE_DM		BIT(30)
+#define IO48_MMR_CTRLCFG1_DBC2_ENABLE_DM		BIT(29)
+#define IO48_MMR_CTRLCFG1_DBC1_ENABLE_DM		BIT(28)
+#define IO48_MMR_CTRLCFG1_DBC0_ENABLE_DM		BIT(27)
+#define IO48_MMR_CTRLCFG1_CTRL_ENABLE_DM		BIT(26)
+#define IO48_MMR_CTRLCFG1_DQSTRK_EN			BIT(25)
+#define IO48_MMR_CTRLCFG1_STARVE_LIMIT_MASK		0x01F80000
+#define IO48_MMR_CTRLCFG1_STARVE_LIMIT_SHIFT		19
+#define IO48_MMR_CTRLCFG1_REORDER_READ			BIT(18)
+#define IO48_MMR_CTRLCFG1_DBC3_REORDER_RDATA		BIT(17)
+#define IO48_MMR_CTRLCFG1_DBC2_REORDER_RDATA		BIT(16)
+#define IO48_MMR_CTRLCFG1_DBC1_REORDER_RDATA		BIT(15)
+#define IO48_MMR_CTRLCFG1_DBC0_REORDER_RDATA		BIT(14)
+#define IO48_MMR_CTRLCFG1_CTRL_REORDER_RDATA		BIT(13)
+#define IO48_MMR_CTRLCFG1_REORDER_DATA			BIT(12)
+#define IO48_MMR_CTRLCFG1_DBC3_ENABLE_ECC		BIT(11)
+#define IO48_MMR_CTRLCFG1_DBC2_ENABLE_ECC		BIT(10)
+#define IO48_MMR_CTRLCFG1_DBC1_ENABLE_ECC		BIT(9)
+#define IO48_MMR_CTRLCFG1_DBC0_ENABLE_ECC		BIT(8)
+#define IO48_MMR_CTRLCFG1_CTRL_ENABLE_ECC		BIT(7)
+#define IO48_MMR_CTRLCFG1_ADDR_ORDER_MASK		0x00000060
+#define IO48_MMR_CTRLCFG1_ADDR_ORDER_SHIFT		5
+#define IO48_MMR_CTRLCFG1_DBC3_BURST_LENGTH_MASK	0x0000001F
+#define IO48_MMR_CTRLCFG1_DBC3_BURST_LENGTH_SHIFT	0
+
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BG_MASK		0x3F000000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BG_SHIFT	24
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_MASK	0x00FC0000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_SHIFT	18
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_MASK			0x0003F000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_SHIFT		12
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_PCH_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_PCH_SHIFT		6
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_MASK		0x0000003F
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_SHIFT		0
+
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_MASK		0x3F000000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_SHIFT	24
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_MASK			0x00FC0000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_SHIFT			18
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DB_MASK		0x0003F000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DB_SHIFT		12
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_MASK		0x00000FC0
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_SHIFT		6
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_MASK			0x0000003F
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_SHIFT			0
+
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_DIFF_CHIP_MASK		0x3F000000
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_DIFF_CHIP_SHIFT	24
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_MASK			0x00FC0000
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_SHIFT			18
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_AP_VALID_MASK		0x0003F000
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_AP_VALID_SHIFT		12
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_SHIFT			6
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_WR_DIFF_BG_MASK		0x0000003F
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_WR_DIFF_BG_SHIFT		0
+
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_PCH_MASK			0x3F000000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_PCH_SHIFT			24
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_BG_MASK		0x00FC0000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_BG_SHIFT		18
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_MASK		0x0003F000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_SHIFT	12
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_SHIFT			6
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_WR_DIFF_BG_MASK		0x0000003F
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_WR_DIFF_BG_SHIFT		0
+
+#define IO48_MMR_CALTIMING4_CFG_PDN_TO_VALID_MASK		0xFC000000
+#define IO48_MMR_CALTIMING4_CFG_PDN_TO_VALID_SHIFT		26
+#define IO48_MMR_CALTIMING4_CFG_ARF_TO_VALID_MASK		0x03FC0000
+#define IO48_MMR_CALTIMING4_CFG_ARF_TO_VALID_SHIFT		18
+#define IO48_MMR_CALTIMING4_CFG_PCH_ALL_TO_VALID_MASK		0x0003F000
+#define IO48_MMR_CALTIMING4_CFG_PCH_ALL_TO_VALID_SHIFT		12
+#define IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_MASK		0x00000FC0
+#define IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_SHIFT		6
+#define IO48_MMR_CALTIMING4_CFG_WR_AP_TO_VALID_MASK		0x0000003F
+#define IO48_MMR_CALTIMING4_CFG_WR_AP_TO_VALID_SHIFT		0
+
+#define IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_MASK		0x000000FF
+#define IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_SHIFT		0
+
+#define IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_MASK		0x00070000
+#define IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_SHIFT		16
+#define IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_MASK	0x0000C000
+#define IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_SHIFT	14
+#define IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_MASK		0x00003C00
+#define IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_SHIFT		10
+#define IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_MASK		0x000003E0
+#define IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_SHIFT		5
+#define IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_MASK		0x0000001F
+#define IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_SHIFT		0
+
+#define ALT_ECC_HMC_OCP_DDRIOCTRL_IO_SIZE_MSK		0x00000003
+
+#define ALT_ECC_HMC_OCP_INTSTAT_SERRPENA_SET_MSK	BIT(0)
+#define ALT_ECC_HMC_OCP_INTSTAT_DERRPENA_SET_MSK	BIT(1)
+#define ALT_ECC_HMC_OCP_ERRINTEN_SERRINTEN_SET_MSK	BIT(0)
+#define ALT_ECC_HMC_OCP_ERRINTEN_DERRINTEN_SET_MSK	BIT(1)
+#define ALT_ECC_HMC_OCP_INTMOD_INTONCMP_SET_MSK		BIT(16)
+#define ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK	BIT(16)
+#define ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK		BIT(8)
+#define ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK		BIT(0)
+#define ALT_ECC_HMC_OCP_ECCCTL2_RMW_EN_SET_MSK		BIT(8)
+#define ALT_ECC_HMC_OCP_ECCCTL2_AWB_EN_SET_MSK		BIT(0)
+
+#define ALT_ECC_HMC_OCP_SERRCNTREG_VALUE		8
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_ACTTOACT_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOMISS_LSB	6
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTOMISS_LSB	12
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BURSTLEN_LSB	18
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOWR_LSB	21
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTORD_LSB	26
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BWRATIO_LSB	31
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_AUTOPRECHARGE_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_BWRATIOEXTENDED_LSB	1
+
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_RRD_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAW_LSB	4
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAWBANK_LSB	10
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTORD_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTOWR_LSB	2
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSWRTORD_LSB	4
+
+#define ALT_NOC_FW_DDR_END_ADDR_LSB	16
+#define ALT_NOC_FW_DDR_ADDR_MASK	0xFFFF
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG0EN_SET_MSK		BIT(0)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG1EN_SET_MSK		BIT(1)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG2EN_SET_MSK		BIT(2)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG3EN_SET_MSK		BIT(3)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG4EN_SET_MSK		BIT(4)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG5EN_SET_MSK		BIT(5)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG6EN_SET_MSK		BIT(6)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG7EN_SET_MSK		BIT(7)
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG0EN_SET_MSK		BIT(0)
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG1EN_SET_MSK		BIT(1)
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG2EN_SET_MSK		BIT(2)
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG3EN_SET_MSK		BIT(3)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG0EN_SET_MSK	BIT(4)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG1EN_SET_MSK	BIT(5)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG2EN_SET_MSK	BIT(6)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG3EN_SET_MSK	BIT(7)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG0EN_SET_MSK	BIT(8)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG1EN_SET_MSK	BIT(9)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG2EN_SET_MSK	BIT(10)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG3EN_SET_MSK	BIT(11)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG0EN_SET_MSK	BIT(12)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG1EN_SET_MSK	BIT(13)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG2EN_SET_MSK	BIT(14)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG3EN_SET_MSK	BIT(15)
+
+#define ALT_IO48_DRAMTIME_MEM_READ_LATENCY_MASK		0x0000003F
+#endif /* _SOCFPGA_SDRAM_ARRIA10_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram_gen5.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram_gen5.h
new file mode 100644
index 000000000..8818a6b96
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/sdram_gen5.h
@@ -0,0 +1,465 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright Altera Corporation (C) 2014-2015
+ */
+#ifndef	_SOCFPGA_SDRAM_GEN5_H_
+#define	_SOCFPGA_SDRAM_GEN5_H_
+
+#ifndef __ASSEMBLY__
+
+const struct socfpga_sdram_config *socfpga_get_sdram_config(void);
+
+void socfpga_get_seq_ac_init(const u32 **init, unsigned int *nelem);
+void socfpga_get_seq_inst_init(const u32 **init, unsigned int *nelem);
+const struct socfpga_sdram_rw_mgr_config *socfpga_get_sdram_rwmgr_config(void);
+const struct socfpga_sdram_io_config *socfpga_get_sdram_io_config(void);
+const struct socfpga_sdram_misc_config *socfpga_get_sdram_misc_config(void);
+
+#define SDR_CTRLGRP_ADDRESS	(SOCFPGA_SDR_ADDRESS | 0x5000)
+
+struct socfpga_sdr_ctrl {
+	u32	ctrl_cfg;
+	u32	dram_timing1;
+	u32	dram_timing2;
+	u32	dram_timing3;
+	u32	dram_timing4;	/* 0x10 */
+	u32	lowpwr_timing;
+	u32	dram_odt;
+	u32	extratime1;
+	u32	__padding0[3];
+	u32	dram_addrw;	/* 0x2c */
+	u32	dram_if_width;	/* 0x30 */
+	u32	dram_dev_width;
+	u32	dram_sts;
+	u32	dram_intr;
+	u32	sbe_count;	/* 0x40 */
+	u32	dbe_count;
+	u32	err_addr;
+	u32	drop_count;
+	u32	drop_addr;	/* 0x50 */
+	u32	lowpwr_eq;
+	u32	lowpwr_ack;
+	u32	static_cfg;
+	u32	ctrl_width;	/* 0x60 */
+	u32	cport_width;
+	u32	cport_wmap;
+	u32	cport_rmap;
+	u32	rfifo_cmap;	/* 0x70 */
+	u32	wfifo_cmap;
+	u32	cport_rdwr;
+	u32	port_cfg;
+	u32	fpgaport_rst;	/* 0x80 */
+	u32	__padding1;
+	u32	fifo_cfg;
+	u32	protport_default;
+	u32	prot_rule_addr;	/* 0x90 */
+	u32	prot_rule_id;
+	u32	prot_rule_data;
+	u32	prot_rule_rdwr;
+	u32	__padding2[3];
+	u32	mp_priority;	/* 0xac */
+	u32	mp_weight0;	/* 0xb0 */
+	u32	mp_weight1;
+	u32	mp_weight2;
+	u32	mp_weight3;
+	u32	mp_pacing0;	/* 0xc0 */
+	u32	mp_pacing1;
+	u32	mp_pacing2;
+	u32	mp_pacing3;
+	u32	mp_threshold0;	/* 0xd0 */
+	u32	mp_threshold1;
+	u32	mp_threshold2;
+	u32	__padding3[29];
+	u32	phy_ctrl0;	/* 0x150 */
+	u32	phy_ctrl1;
+	u32	phy_ctrl2;
+};
+
+/* SDRAM configuration structure for the SPL. */
+struct socfpga_sdram_config {
+	u32	ctrl_cfg;
+	u32	dram_timing1;
+	u32	dram_timing2;
+	u32	dram_timing3;
+	u32	dram_timing4;
+	u32	lowpwr_timing;
+	u32	dram_odt;
+	u32	extratime1;
+	u32	dram_addrw;
+	u32	dram_if_width;
+	u32	dram_dev_width;
+	u32	dram_intr;
+	u32	lowpwr_eq;
+	u32	static_cfg;
+	u32	ctrl_width;
+	u32	cport_width;
+	u32	cport_wmap;
+	u32	cport_rmap;
+	u32	rfifo_cmap;
+	u32	wfifo_cmap;
+	u32	cport_rdwr;
+	u32	port_cfg;
+	u32	fpgaport_rst;
+	u32	fifo_cfg;
+	u32	mp_priority;
+	u32	mp_weight0;
+	u32	mp_weight1;
+	u32	mp_weight2;
+	u32	mp_weight3;
+	u32	mp_pacing0;
+	u32	mp_pacing1;
+	u32	mp_pacing2;
+	u32	mp_pacing3;
+	u32	mp_threshold0;
+	u32	mp_threshold1;
+	u32	mp_threshold2;
+	u32	phy_ctrl0;
+};
+
+struct socfpga_sdram_rw_mgr_config {
+	u8	activate_0_and_1;
+	u8	activate_0_and_1_wait1;
+	u8	activate_0_and_1_wait2;
+	u8	activate_1;
+	u8	clear_dqs_enable;
+	u8	guaranteed_read;
+	u8	guaranteed_read_cont;
+	u8	guaranteed_write;
+	u8	guaranteed_write_wait0;
+	u8	guaranteed_write_wait1;
+	u8	guaranteed_write_wait2;
+	u8	guaranteed_write_wait3;
+	u8	idle;
+	u8	idle_loop1;
+	u8	idle_loop2;
+	u8	init_reset_0_cke_0;
+	u8	init_reset_1_cke_0;
+	u8	lfsr_wr_rd_bank_0;
+	u8	lfsr_wr_rd_bank_0_data;
+	u8	lfsr_wr_rd_bank_0_dqs;
+	u8	lfsr_wr_rd_bank_0_nop;
+	u8	lfsr_wr_rd_bank_0_wait;
+	u8	lfsr_wr_rd_bank_0_wl_1;
+	u8	lfsr_wr_rd_dm_bank_0;
+	u8	lfsr_wr_rd_dm_bank_0_data;
+	u8	lfsr_wr_rd_dm_bank_0_dqs;
+	u8	lfsr_wr_rd_dm_bank_0_nop;
+	u8	lfsr_wr_rd_dm_bank_0_wait;
+	u8	lfsr_wr_rd_dm_bank_0_wl_1;
+	union {
+		u8	mrs0_dll_reset;
+		u8	mr_dll_reset;
+	};
+	union {
+		u8	mrs0_dll_reset_mirr;
+		u8	emr_ocd_enable;
+	};
+	union {
+		u8	mrs0_user;
+		u8	mr_user;
+	};
+	union {
+		u8	mrs0_user_mirr;
+		u8	mr_calib;
+	};
+	union {
+		u8	mrs1;
+		u8	emr;
+	};
+	union {
+		u8	mrs2;
+		u8	emr2;
+	};
+	union {
+		u8	mrs3;
+		u8	emr3;
+	};
+	u8	mrs1_mirr;
+	u8	mrs2_mirr;
+	u8	mrs3_mirr;
+	u8	precharge_all;
+	u8	read_b2b;
+	u8	read_b2b_wait1;
+	u8	read_b2b_wait2;
+	union {
+		u8	refresh;
+		u8	refresh_all;
+	};
+	u8	rreturn;
+	u8	sgle_read;
+	union {
+		u8	zqcl;
+		u8	nop;
+	};
+
+	u8	true_mem_data_mask_width;
+	u8	mem_address_mirroring;
+	u8	mem_data_mask_width;
+	u8	mem_data_width;
+	u8	mem_dq_per_read_dqs;
+	u8	mem_dq_per_write_dqs;
+	u8	mem_if_read_dqs_width;
+	u8	mem_if_write_dqs_width;
+	u8	mem_number_of_cs_per_dimm;
+	u8	mem_number_of_ranks;
+	u8	mem_virtual_groups_per_read_dqs;
+	u8	mem_virtual_groups_per_write_dqs;
+};
+
+struct socfpga_sdram_io_config {
+	u16	delay_per_opa_tap;
+	u8	delay_per_dchain_tap;
+	u8	delay_per_dqs_en_dchain_tap;
+	u8	dll_chain_length;
+	u8	dqdqs_out_phase_max;
+	u8	dqs_en_delay_max;
+	u8	dqs_en_delay_offset;
+	u8	dqs_en_phase_max;
+	u8	dqs_in_delay_max;
+	u8	dqs_in_reserve;
+	u8	dqs_out_reserve;
+	u8	io_in_delay_max;
+	u8	io_out1_delay_max;
+	u8	io_out2_delay_max;
+	u8	shift_dqs_en_when_shift_dqs;
+};
+
+struct socfpga_sdram_misc_config {
+	u32	reg_file_init_seq_signature;
+	u16	afi_clk_freq;
+	u8	afi_rate_ratio;
+	u8	calib_lfifo_offset;
+	u8	calib_vfifo_offset;
+	u8	enable_super_quick_calibration;
+	u8	max_latency_count_width;
+	u8	read_valid_fifo_size;
+	u8	tinit_cntr0_val;
+	u8	tinit_cntr1_val;
+	u8	tinit_cntr2_val;
+	u8	treset_cntr0_val;
+	u8	treset_cntr1_val;
+	u8	treset_cntr2_val;
+};
+
+#define SDR_CTRLGRP_CTRLCFG_NODMPINS_LSB 23
+#define SDR_CTRLGRP_CTRLCFG_NODMPINS_MASK 0x00800000
+#define SDR_CTRLGRP_CTRLCFG_DQSTRKEN_LSB 22
+#define SDR_CTRLGRP_CTRLCFG_DQSTRKEN_MASK 0x00400000
+#define SDR_CTRLGRP_CTRLCFG_STARVELIMIT_LSB 16
+#define SDR_CTRLGRP_CTRLCFG_STARVELIMIT_MASK 0x003f0000
+#define SDR_CTRLGRP_CTRLCFG_REORDEREN_LSB 15
+#define SDR_CTRLGRP_CTRLCFG_REORDEREN_MASK 0x00008000
+#define SDR_CTRLGRP_CTRLCFG_ECCCORREN_LSB 11
+#define SDR_CTRLGRP_CTRLCFG_ECCCORREN_MASK 0x00000800
+#define SDR_CTRLGRP_CTRLCFG_ECCEN_LSB 10
+#define SDR_CTRLGRP_CTRLCFG_ECCEN_MASK 0x00000400
+#define SDR_CTRLGRP_CTRLCFG_ADDRORDER_LSB 8
+#define SDR_CTRLGRP_CTRLCFG_ADDRORDER_MASK 0x00000300
+#define SDR_CTRLGRP_CTRLCFG_MEMBL_LSB 3
+#define SDR_CTRLGRP_CTRLCFG_MEMBL_MASK 0x000000f8
+#define SDR_CTRLGRP_CTRLCFG_MEMTYPE_LSB 0
+#define SDR_CTRLGRP_CTRLCFG_MEMTYPE_MASK 0x00000007
+/* Register template: sdr::ctrlgrp::dramtiming1                            */
+#define SDR_CTRLGRP_DRAMTIMING1_TRFC_LSB 24
+#define SDR_CTRLGRP_DRAMTIMING1_TRFC_MASK 0xff000000
+#define SDR_CTRLGRP_DRAMTIMING1_TFAW_LSB 18
+#define SDR_CTRLGRP_DRAMTIMING1_TFAW_MASK 0x00fc0000
+#define SDR_CTRLGRP_DRAMTIMING1_TRRD_LSB 14
+#define SDR_CTRLGRP_DRAMTIMING1_TRRD_MASK 0x0003c000
+#define SDR_CTRLGRP_DRAMTIMING1_TCL_LSB 9
+#define SDR_CTRLGRP_DRAMTIMING1_TCL_MASK 0x00003e00
+#define SDR_CTRLGRP_DRAMTIMING1_TAL_LSB 4
+#define SDR_CTRLGRP_DRAMTIMING1_TAL_MASK 0x000001f0
+#define SDR_CTRLGRP_DRAMTIMING1_TCWL_LSB 0
+#define SDR_CTRLGRP_DRAMTIMING1_TCWL_MASK 0x0000000f
+/* Register template: sdr::ctrlgrp::dramtiming2                            */
+#define SDR_CTRLGRP_DRAMTIMING2_TWTR_LSB 25
+#define SDR_CTRLGRP_DRAMTIMING2_TWTR_MASK 0x1e000000
+#define SDR_CTRLGRP_DRAMTIMING2_TWR_LSB 21
+#define SDR_CTRLGRP_DRAMTIMING2_TWR_MASK 0x01e00000
+#define SDR_CTRLGRP_DRAMTIMING2_TRP_LSB 17
+#define SDR_CTRLGRP_DRAMTIMING2_TRP_MASK 0x001e0000
+#define SDR_CTRLGRP_DRAMTIMING2_TRCD_LSB 13
+#define SDR_CTRLGRP_DRAMTIMING2_TRCD_MASK 0x0001e000
+#define SDR_CTRLGRP_DRAMTIMING2_TREFI_LSB 0
+#define SDR_CTRLGRP_DRAMTIMING2_TREFI_MASK 0x00001fff
+/* Register template: sdr::ctrlgrp::dramtiming3                            */
+#define SDR_CTRLGRP_DRAMTIMING3_TCCD_LSB 19
+#define SDR_CTRLGRP_DRAMTIMING3_TCCD_MASK 0x00780000
+#define SDR_CTRLGRP_DRAMTIMING3_TMRD_LSB 15
+#define SDR_CTRLGRP_DRAMTIMING3_TMRD_MASK 0x00078000
+#define SDR_CTRLGRP_DRAMTIMING3_TRC_LSB 9
+#define SDR_CTRLGRP_DRAMTIMING3_TRC_MASK 0x00007e00
+#define SDR_CTRLGRP_DRAMTIMING3_TRAS_LSB 4
+#define SDR_CTRLGRP_DRAMTIMING3_TRAS_MASK 0x000001f0
+#define SDR_CTRLGRP_DRAMTIMING3_TRTP_LSB 0
+#define SDR_CTRLGRP_DRAMTIMING3_TRTP_MASK 0x0000000f
+/* Register template: sdr::ctrlgrp::dramtiming4                            */
+#define SDR_CTRLGRP_DRAMTIMING4_MINPWRSAVECYCLES_LSB 20
+#define SDR_CTRLGRP_DRAMTIMING4_MINPWRSAVECYCLES_MASK 0x00f00000
+#define SDR_CTRLGRP_DRAMTIMING4_PWRDOWNEXIT_LSB 10
+#define SDR_CTRLGRP_DRAMTIMING4_PWRDOWNEXIT_MASK 0x000ffc00
+#define SDR_CTRLGRP_DRAMTIMING4_SELFRFSHEXIT_LSB 0
+#define SDR_CTRLGRP_DRAMTIMING4_SELFRFSHEXIT_MASK 0x000003ff
+/* Register template: sdr::ctrlgrp::lowpwrtiming                           */
+#define SDR_CTRLGRP_LOWPWRTIMING_CLKDISABLECYCLES_LSB 16
+#define SDR_CTRLGRP_LOWPWRTIMING_CLKDISABLECYCLES_MASK 0x000f0000
+#define SDR_CTRLGRP_LOWPWRTIMING_AUTOPDCYCLES_LSB 0
+#define SDR_CTRLGRP_LOWPWRTIMING_AUTOPDCYCLES_MASK 0x0000ffff
+/* Register template: sdr::ctrlgrp::dramaddrw                              */
+#define SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB 13
+#define SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK 0x0000e000
+#define SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB 10
+#define SDR_CTRLGRP_DRAMADDRW_BANKBITS_MASK 0x00001c00
+#define SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB 5
+#define SDR_CTRLGRP_DRAMADDRW_ROWBITS_MASK 0x000003e0
+#define SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB 0
+#define SDR_CTRLGRP_DRAMADDRW_COLBITS_MASK 0x0000001f
+/* Register template: sdr::ctrlgrp::dramifwidth                            */
+#define SDR_CTRLGRP_DRAMIFWIDTH_IFWIDTH_LSB 0
+#define SDR_CTRLGRP_DRAMIFWIDTH_IFWIDTH_MASK 0x000000ff
+/* Register template: sdr::ctrlgrp::dramdevwidth                           */
+#define SDR_CTRLGRP_DRAMDEVWIDTH_DEVWIDTH_LSB 0
+#define SDR_CTRLGRP_DRAMDEVWIDTH_DEVWIDTH_MASK 0x0000000f
+/* Register template: sdr::ctrlgrp::dramintr                               */
+#define SDR_CTRLGRP_DRAMINTR_INTREN_LSB 0
+#define SDR_CTRLGRP_DRAMINTR_INTREN_MASK 0x00000001
+#define SDR_CTRLGRP_LOWPWREQ_SELFRFSHMASK_LSB 4
+#define SDR_CTRLGRP_LOWPWREQ_SELFRFSHMASK_MASK 0x00000030
+/* Register template: sdr::ctrlgrp::staticcfg                              */
+#define SDR_CTRLGRP_STATICCFG_APPLYCFG_LSB 3
+#define SDR_CTRLGRP_STATICCFG_APPLYCFG_MASK 0x00000008
+#define SDR_CTRLGRP_STATICCFG_USEECCASDATA_LSB 2
+#define SDR_CTRLGRP_STATICCFG_USEECCASDATA_MASK 0x00000004
+#define SDR_CTRLGRP_STATICCFG_MEMBL_LSB 0
+#define SDR_CTRLGRP_STATICCFG_MEMBL_MASK 0x00000003
+/* Register template: sdr::ctrlgrp::ctrlwidth                              */
+#define SDR_CTRLGRP_CTRLWIDTH_CTRLWIDTH_LSB 0
+#define SDR_CTRLGRP_CTRLWIDTH_CTRLWIDTH_MASK 0x00000003
+/* Register template: sdr::ctrlgrp::cportwidth                             */
+#define SDR_CTRLGRP_CPORTWIDTH_CMDPORTWIDTH_LSB 0
+#define SDR_CTRLGRP_CPORTWIDTH_CMDPORTWIDTH_MASK 0x000fffff
+/* Register template: sdr::ctrlgrp::cportwmap                              */
+#define SDR_CTRLGRP_CPORTWMAP_CPORTWFIFOMAP_LSB 0
+#define SDR_CTRLGRP_CPORTWMAP_CPORTWFIFOMAP_MASK 0x3fffffff
+/* Register template: sdr::ctrlgrp::cportrmap                              */
+#define SDR_CTRLGRP_CPORTRMAP_CPORTRFIFOMAP_LSB 0
+#define SDR_CTRLGRP_CPORTRMAP_CPORTRFIFOMAP_MASK 0x3fffffff
+/* Register template: sdr::ctrlgrp::rfifocmap                              */
+#define SDR_CTRLGRP_RFIFOCMAP_RFIFOCPORTMAP_LSB 0
+#define SDR_CTRLGRP_RFIFOCMAP_RFIFOCPORTMAP_MASK 0x00ffffff
+/* Register template: sdr::ctrlgrp::wfifocmap                              */
+#define SDR_CTRLGRP_WFIFOCMAP_WFIFOCPORTMAP_LSB 0
+#define SDR_CTRLGRP_WFIFOCMAP_WFIFOCPORTMAP_MASK 0x00ffffff
+/* Register template: sdr::ctrlgrp::cportrdwr                              */
+#define SDR_CTRLGRP_CPORTRDWR_CPORTRDWR_LSB 0
+#define SDR_CTRLGRP_CPORTRDWR_CPORTRDWR_MASK 0x000fffff
+/* Register template: sdr::ctrlgrp::portcfg                                */
+#define SDR_CTRLGRP_PORTCFG_AUTOPCHEN_LSB 10
+#define SDR_CTRLGRP_PORTCFG_AUTOPCHEN_MASK 0x000ffc00
+#define SDR_CTRLGRP_PORTCFG_PORTPROTOCOL_LSB 0
+#define SDR_CTRLGRP_PORTCFG_PORTPROTOCOL_MASK 0x000003ff
+/* Register template: sdr::ctrlgrp::fifocfg                                */
+#define SDR_CTRLGRP_FIFOCFG_INCSYNC_LSB 10
+#define SDR_CTRLGRP_FIFOCFG_INCSYNC_MASK 0x00000400
+#define SDR_CTRLGRP_FIFOCFG_SYNCMODE_LSB 0
+#define SDR_CTRLGRP_FIFOCFG_SYNCMODE_MASK 0x000003ff
+/* Register template: sdr::ctrlgrp::mppriority                             */
+#define SDR_CTRLGRP_MPPRIORITY_USERPRIORITY_LSB 0
+#define SDR_CTRLGRP_MPPRIORITY_USERPRIORITY_MASK 0x3fffffff
+/* Register template: sdr::ctrlgrp::mpweight::mpweight_0                   */
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_0_STATICWEIGHT_31_0_LSB 0
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_0_STATICWEIGHT_31_0_MASK 0xffffffff
+/* Register template: sdr::ctrlgrp::mpweight::mpweight_1                   */
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_SUMOFWEIGHTS_13_0_LSB 18
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_SUMOFWEIGHTS_13_0_MASK 0xfffc0000
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_STATICWEIGHT_49_32_LSB 0
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_STATICWEIGHT_49_32_MASK 0x0003ffff
+/* Register template: sdr::ctrlgrp::mpweight::mpweight_2                   */
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_2_SUMOFWEIGHTS_45_14_LSB 0
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_2_SUMOFWEIGHTS_45_14_MASK 0xffffffff
+/* Register template: sdr::ctrlgrp::mpweight::mpweight_3                   */
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_3_SUMOFWEIGHTS_63_46_LSB 0
+#define SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_3_SUMOFWEIGHTS_63_46_MASK 0x0003ffff
+/* Register template: sdr::ctrlgrp::mppacing::mppacing_0                   */
+#define SDR_CTRLGRP_MPPACING_MPPACING_0_THRESHOLD1_31_0_LSB 0
+#define SDR_CTRLGRP_MPPACING_MPPACING_0_THRESHOLD1_31_0_MASK 0xffffffff
+/* Register template: sdr::ctrlgrp::mppacing::mppacing_1                   */
+#define SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD2_3_0_LSB 28
+#define SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD2_3_0_MASK 0xf0000000
+#define SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD1_59_32_LSB 0
+#define SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD1_59_32_MASK 0x0fffffff
+/* Register template: sdr::ctrlgrp::mppacing::mppacing_2                   */
+#define SDR_CTRLGRP_MPPACING_MPPACING_2_THRESHOLD2_35_4_LSB 0
+#define SDR_CTRLGRP_MPPACING_MPPACING_2_THRESHOLD2_35_4_MASK 0xffffffff
+/* Register template: sdr::ctrlgrp::mppacing::mppacing_3                   */
+#define SDR_CTRLGRP_MPPACING_MPPACING_3_THRESHOLD2_59_36_LSB 0
+#define SDR_CTRLGRP_MPPACING_MPPACING_3_THRESHOLD2_59_36_MASK 0x00ffffff
+/* Register template: sdr::ctrlgrp::mpthresholdrst::mpthresholdrst_0       */
+#define \
+SDR_CTRLGRP_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0_LSB 0
+#define  \
+SDR_CTRLGRP_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0_MASK \
+0xffffffff
+/* Register template: sdr::ctrlgrp::mpthresholdrst::mpthresholdrst_1       */
+#define \
+SDR_CTRLGRP_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32_LSB 0
+#define \
+SDR_CTRLGRP_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32_MASK \
+0xffffffff
+/* Register template: sdr::ctrlgrp::mpthresholdrst::mpthresholdrst_2       */
+#define \
+SDR_CTRLGRP_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64_LSB 0
+#define \
+SDR_CTRLGRP_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64_MASK \
+0x0000ffff
+/* Register template: sdr::ctrlgrp::remappriority                          */
+#define SDR_CTRLGRP_REMAPPRIORITY_PRIORITYREMAP_LSB 0
+#define SDR_CTRLGRP_REMAPPRIORITY_PRIORITYREMAP_MASK 0x000000ff
+/* Register template: sdr::ctrlgrp::phyctrl::phyctrl_0                     */
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_SAMPLECOUNT_19_0_LSB 12
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_SAMPLECOUNT_19_0_WIDTH 20
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_SAMPLECOUNT_19_0_SET(x) \
+ (((x) << 12) & 0xfffff000)
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_ADDLATSEL_SET(x) \
+ (((x) << 10) & 0x00000c00)
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_DQSLOGICDELAYEN_SET(x) \
+ (((x) << 6) & 0x000000c0)
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_RESETDELAYEN_SET(x) \
+ (((x) << 8) & 0x00000100)
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_LPDDRDIS_SET(x) \
+ (((x) << 9) & 0x00000200)
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_DQSDELAYEN_SET(x) \
+ (((x) << 4) & 0x00000030)
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_DQDELAYEN_SET(x) \
+ (((x) << 2) & 0x0000000c)
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_ACDELAYEN_SET(x) \
+ (((x) << 0) & 0x00000003)
+/* Register template: sdr::ctrlgrp::phyctrl::phyctrl_1                     */
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_1_LONGIDLESAMPLECOUNT_19_0_WIDTH 20
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_1_LONGIDLESAMPLECOUNT_19_0_SET(x) \
+ (((x) << 12) & 0xfffff000)
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_1_SAMPLECOUNT_31_20_SET(x) \
+ (((x) << 0) & 0x00000fff)
+/* Register template: sdr::ctrlgrp::phyctrl::phyctrl_2                     */
+#define SDR_CTRLGRP_PHYCTRL_PHYCTRL_2_LONGIDLESAMPLECOUNT_31_20_SET(x) \
+ (((x) << 0) & 0x00000fff)
+/* Register template: sdr::ctrlgrp::dramodt                                */
+#define SDR_CTRLGRP_DRAMODT_READ_LSB 4
+#define SDR_CTRLGRP_DRAMODT_READ_MASK 0x000000f0
+#define SDR_CTRLGRP_DRAMODT_WRITE_LSB 0
+#define SDR_CTRLGRP_DRAMODT_WRITE_MASK 0x0000000f
+/* Field instance: sdr::ctrlgrp::dramsts                                   */
+#define SDR_CTRLGRP_DRAMSTS_DBEERR_MASK 0x00000008
+#define SDR_CTRLGRP_DRAMSTS_SBEERR_MASK 0x00000004
+/* Register template: sdr::ctrlgrp::extratime1                             */
+#define SDR_CTRLGRP_EXTRATIME1_RD_TO_WR_LSB 20
+#define SDR_CTRLGRP_EXTRATIME1_RD_TO_WR_BC_LSB 24
+#define SDR_CTRLGRP_EXTRATIME1_RD_TO_WR_DIFF_LSB 28
+
+/* SDRAM width macro for configuration with ECC */
+#define SDRAM_WIDTH_32BIT_WITH_ECC	40
+#define SDRAM_WIDTH_16BIT_WITH_ECC	24
+
+#endif
+#endif /* _SOCFPGA_SDRAM_GEN5_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/secure_reg_helper.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/secure_reg_helper.h
new file mode 100644
index 000000000..d5a11122c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/secure_reg_helper.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef	_SECURE_REG_HELPER_H_
+#define	_SECURE_REG_HELPER_H_
+
+#define SOCFPGA_SECURE_REG_SYSMGR_SOC64_SDMMC 1
+#define SOCFPGA_SECURE_REG_SYSMGR_SOC64_EMAC0 2
+#define SOCFPGA_SECURE_REG_SYSMGR_SOC64_EMAC1 3
+#define SOCFPGA_SECURE_REG_SYSMGR_SOC64_EMAC2 4
+
+int socfpga_secure_reg_read32(u32 id, u32 *val);
+int socfpga_secure_reg_write32(u32 id, u32 val);
+int socfpga_secure_reg_update32(u32 id, u32 mask, u32 val);
+
+#endif /* _SECURE_REG_HELPER_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/secure_vab.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/secure_vab.h
new file mode 100644
index 000000000..42588588e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/secure_vab.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef	_SECURE_VAB_H_
+#define	_SECURE_VAB_H_
+
+#include <linux/sizes.h>
+#include <linux/stddef.h>
+#include <u-boot/sha512.h>
+
+#define VAB_DATA_SZ			64
+
+#define SDM_CERT_MAGIC_NUM		0x25D04E7F
+#define FCS_HPS_VAB_MAGIC_NUM		0xD0564142
+
+#define MAX_CERT_SIZE			(SZ_4K)
+
+/*
+ * struct fcs_hps_vab_certificate_data
+ * @vab_cert_magic_num: VAB Certificate Magic Word (0xD0564142)
+ * @flags: TBD
+ * @fcs_data: Data words being certificate signed.
+ * @cert_sign_keychain: Certificate Signing Keychain
+ */
+struct fcs_hps_vab_certificate_data {
+	u32 vab_cert_magic_num;		/* offset 0x10 */
+	u32 flags;
+	u8 rsvd0_1[8];
+	u8 fcs_sha384[SHA384_SUM_LEN];	/* offset 0x20 */
+};
+
+/*
+ * struct fcs_hps_vab_certificate_header
+ * @cert_magic_num: Certificate Magic Word (0x25D04E7F)
+ * @cert_data_sz: size of this certificate header (0x80)
+ *	Includes magic number all the way to the certificate
+ *      signing keychain (excludes cert. signing keychain)
+ * @cert_ver: Certificate Version
+ * @cert_type: Certificate Type
+ * @data: VAB HPS Image Certificate data
+ */
+struct fcs_hps_vab_certificate_header {
+	u32 cert_magic_num;		/* offset 0 */
+	u32 cert_data_sz;
+	u32 cert_ver;
+	u32 cert_type;
+	struct fcs_hps_vab_certificate_data d;	/* offset 0x10 */
+	/* keychain starts at offset 0x50 */
+};
+
+#define VAB_CERT_HEADER_SIZE	sizeof(struct fcs_hps_vab_certificate_header)
+#define VAB_CERT_MAGIC_OFFSET	offsetof \
+				(struct fcs_hps_vab_certificate_header, d)
+#define VAB_CERT_FIT_SHA384_OFFSET	offsetof \
+					(struct fcs_hps_vab_certificate_data, \
+					 fcs_sha384[0])
+
+int socfpga_vendor_authentication(void **p_image, size_t *p_size);
+
+#endif /* _SECURE_VAB_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/smc_api.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/smc_api.h
new file mode 100644
index 000000000..6b5b7eadc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/smc_api.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Intel Corporation
+ */
+
+#ifndef _SMC_API_H_
+#define _SMC_API_H_
+
+int invoke_smc(u32 func_id, u64 *args, int arg_len, u64 *ret_arg, int ret_len);
+int smc_send_mailbox(u32 cmd, u32 len, u32 *arg, u8 urgent, u32 *resp_buf_len,
+		     u32 *resp_buf);
+int smc_get_usercode(u32 *usercode);
+
+#endif /* _SMC_API_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager.h
new file mode 100644
index 000000000..5603eaa3d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _SYSTEM_MANAGER_H_
+#define _SYSTEM_MANAGER_H_
+
+phys_addr_t socfpga_get_sysmgr_addr(void);
+
+#if defined(CONFIG_TARGET_SOCFPGA_SOC64)
+#include <asm/arch/system_manager_soc64.h>
+#else
+#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX	BIT(0)
+#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO	BIT(1)
+#define SYSMGR_ECC_OCRAM_EN	BIT(0)
+#define SYSMGR_ECC_OCRAM_SERR	BIT(3)
+#define SYSMGR_ECC_OCRAM_DERR	BIT(4)
+#define SYSMGR_FPGAINTF_USEFPGA	0x1
+#define SYSMGR_FPGAINTF_SPIM0	BIT(0)
+#define SYSMGR_FPGAINTF_SPIM1	BIT(1)
+#define SYSMGR_FPGAINTF_EMAC0	BIT(2)
+#define SYSMGR_FPGAINTF_EMAC1	BIT(3)
+#define SYSMGR_FPGAINTF_NAND	BIT(4)
+#define SYSMGR_FPGAINTF_SDMMC	BIT(5)
+
+#define SYSMGR_SDMMC_DRVSEL_SHIFT	0
+
+/* EMAC Group Bit definitions */
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII	0x0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII		0x1
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII		0x2
+
+#define SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB			0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB			2
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK			0x3
+
+/* For dedicated IO configuration */
+/* Voltage select enums */
+#define VOLTAGE_SEL_3V		0x0
+#define VOLTAGE_SEL_1P8V	0x1
+#define VOLTAGE_SEL_2P5V	0x2
+
+/* Input buffer enable */
+#define INPUT_BUF_DISABLE	0
+#define INPUT_BUF_1P8V		1
+#define INPUT_BUF_2P5V3V	2
+
+/* Weak pull up enable */
+#define WK_PU_DISABLE		0
+#define WK_PU_ENABLE		1
+
+/* Pull up slew rate control */
+#define PU_SLW_RT_SLOW		0
+#define PU_SLW_RT_FAST		1
+#define PU_SLW_RT_DEFAULT	PU_SLW_RT_SLOW
+
+/* Pull down slew rate control */
+#define PD_SLW_RT_SLOW		0
+#define PD_SLW_RT_FAST		1
+#define PD_SLW_RT_DEFAULT	PD_SLW_RT_SLOW
+
+/* Drive strength control */
+#define PU_DRV_STRG_DEFAULT	0x10
+#define PD_DRV_STRG_DEFAULT	0x10
+
+/* bit position */
+#define PD_DRV_STRG_LSB		0
+#define PD_SLW_RT_LSB		5
+#define PU_DRV_STRG_LSB		8
+#define PU_SLW_RT_LSB		13
+#define WK_PU_LSB		16
+#define INPUT_BUF_LSB		17
+#define BIAS_TRIM_LSB		19
+#define VOLTAGE_SEL_LSB		0
+
+#define ALT_SYSMGR_NOC_H2F_SET_MSK	BIT(0)
+#define ALT_SYSMGR_NOC_LWH2F_SET_MSK	BIT(4)
+#define ALT_SYSMGR_NOC_F2H_SET_MSK	BIT(8)
+#define ALT_SYSMGR_NOC_F2SDR0_SET_MSK	BIT(16)
+#define ALT_SYSMGR_NOC_F2SDR1_SET_MSK	BIT(20)
+#define ALT_SYSMGR_NOC_F2SDR2_SET_MSK	BIT(24)
+#define ALT_SYSMGR_NOC_TMO_EN_SET_MSK	BIT(0)
+
+#define ALT_SYSMGR_ECC_INTSTAT_SERR_OCRAM_SET_MSK	BIT(1)
+#define ALT_SYSMGR_ECC_INTSTAT_DERR_OCRAM_SET_MSK	BIT(1)
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/system_manager_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/system_manager_arria10.h>
+#endif
+
+#define SYSMGR_GET_BOOTINFO_BSEL(bsel)		\
+		(((bsel) >> SYSMGR_BOOTINFO_BSEL_SHIFT) & 7)
+#include <linux/bitops.h>
+#endif
+#endif /* _SYSTEM_MANAGER_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_arria10.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_arria10.h
new file mode 100644
index 000000000..e4fc6d2e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_arria10.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
+ */
+
+#ifndef _SYSTEM_MANAGER_ARRIA10_H_
+#define _SYSTEM_MANAGER_ARRIA10_H_
+
+#define SYSMGR_A10_WDDBG			0x08
+#define SYSMGR_A10_BOOTINFO			0x0c
+#define SYSMGR_A10_DMA				0x20
+#define SYSMGR_A10_DMA_PERIPH			0x24
+#define SYSMGR_A10_SDMMC			0x28
+#define SYSMGR_A10_SDMMC_L3MASTER		0x2c
+#define SYSMGR_A10_EMAC_GLOBAL			0x40
+#define SYSMGR_A10_EMAC0			0x44
+#define SYSMGR_A10_EMAC1			0x48
+#define SYSMGR_A10_EMAC2			0x4c
+#define SYSMGR_A10_FPGAINTF_EN_GLOBAL		0x60
+#define SYSMGR_A10_FPGAINTF_EN0			0x64
+#define SYSMGR_A10_FPGAINTF_EN1			0x68
+#define SYSMGR_A10_FPGAINTF_EN2			0x6c
+#define SYSMGR_A10_FPGAINTF_EN3			0x70
+#define SYSMGR_A10_ECC_INTMASK_VAL		0x90
+#define SYSMGR_A10_ECC_INTMASK_SET		0x94
+#define SYSMGR_A10_ECC_INTMASK_CLR		0x98
+#define SYSMGR_A10_NOC_TIMEOUT			0xc0
+#define SYSMGR_A10_NOC_IDLEREQ_SET		0xc4
+#define SYSMGR_A10_NOC_IDLEREQ_CLR		0xc8
+#define SYSMGR_A10_NOC_IDLEREQ_VAL		0xcc
+#define SYSMGR_A10_NOC_IDLEACK			0xd0
+#define SYSMGR_A10_NOC_IDLESTATUS		0xd4
+#define SYSMGR_A10_FPGA2SOC_CTRL		0xd8
+
+#define SYSMGR_SDMMC				SYSMGR_A10_SDMMC
+
+#define SYSMGR_SDMMC_SMPLSEL_SHIFT	4
+#define SYSMGR_BOOTINFO_BSEL_SHIFT	12
+
+#endif /* _SYSTEM_MANAGER_ARRIA10_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_gen5.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_gen5.h
new file mode 100644
index 000000000..a63a4ee27
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_gen5.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _SYSTEM_MANAGER_GEN5_H_
+#define _SYSTEM_MANAGER_GEN5_H_
+
+#ifndef __ASSEMBLY__
+
+void sysmgr_pinmux_init(void);
+void sysmgr_config_warmrstcfgio(int enable);
+
+void sysmgr_get_pinmux_table(const u8 **table, unsigned int *table_len);
+
+#define SYSMGR_GEN5_WDDBG			0x10
+#define SYSMGR_GEN5_BOOTINFO			0x14
+#define SYSMGR_GEN5_FPGAINFGRP_GBL		0x20
+#define SYSMGR_GEN5_FPGAINFGRP_INDIV		0x24
+#define SYSMGR_GEN5_FPGAINFGRP_MODULE		0x28
+#define SYSMGR_GEN5_SCANMGRGRP_CTRL		0x30
+#define SYSMGR_GEN5_ISWGRP_HANDOFF		0x80
+#define SYSMGR_GEN5_ROMCODEGRP_CTRL		0xc0
+#define SYSMGR_GEN5_WARMRAMGRP_EN		0xe0
+#define SYSMGR_GEN5_SDMMC			0x108
+#define SYSMGR_GEN5_ECCGRP_OCRAM		0x144
+#define SYSMGR_GEN5_EMACIO			0x400
+#define SYSMGR_GEN5_NAND_USEFPGA		0x6f0
+#define SYSMGR_GEN5_RGMII1_USEFPGA		0x6f8
+#define SYSMGR_GEN5_SDMMC_USEFPGA		0x708
+#define SYSMGR_GEN5_RGMII0_USEFPGA		0x714
+#define SYSMGR_GEN5_SPIM1_USEFPGA		0x730
+#define SYSMGR_GEN5_SPIM0_USEFPGA		0x738
+
+#define SYSMGR_SDMMC				SYSMGR_GEN5_SDMMC
+
+#define SYSMGR_ISWGRP_HANDOFF_OFFSET(i)	\
+	SYSMGR_GEN5_ISWGRP_HANDOFF + ((i) * sizeof(u32))
+#endif
+
+#define SYSMGR_SDMMC_SMPLSEL_SHIFT	3
+#define SYSMGR_BOOTINFO_BSEL_SHIFT	0
+
+#endif /* _SYSTEM_MANAGER_GEN5_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h
new file mode 100644
index 000000000..fc4e17821
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Intel Corporation <www.intel.com>
+ */
+
+#ifndef _SYSTEM_MANAGER_SOC64_H_
+#define _SYSTEM_MANAGER_SOC64_H_
+
+#include <linux/bitops.h>
+void sysmgr_pinmux_init(void);
+void populate_sysmgr_fpgaintf_module(void);
+void populate_sysmgr_pinmux(void);
+
+#define SYSMGR_SOC64_WDDBG			0x08
+#define SYSMGR_SOC64_DMA			0x20
+#define SYSMGR_SOC64_DMA_PERIPH			0x24
+#define SYSMGR_SOC64_SDMMC			0x28
+#define SYSMGR_SOC64_SDMMC_L3MASTER		0x2c
+#define SYSMGR_SOC64_EMAC_GLOBAL		0x40
+#define SYSMGR_SOC64_EMAC0			0x44
+#define SYSMGR_SOC64_EMAC1			0x48
+#define SYSMGR_SOC64_EMAC2			0x4c
+#define SYSMGR_SOC64_EMAC0_ACE			0x50
+#define SYSMGR_SOC64_EMAC1_ACE			0x54
+#define SYSMGR_SOC64_EMAC2_ACE			0x58
+#define SYSMGR_SOC64_NAND_AXUSER		0x5c
+#define SYSMGR_SOC64_FPGAINTF_EN1		0x68
+#define SYSMGR_SOC64_FPGAINTF_EN2		0x6c
+#define SYSMGR_SOC64_FPGAINTF_EN3		0x70
+#define SYSMGR_SOC64_DMA_L3MASTER		0x74
+#define SYSMGR_SOC64_HMC_CLK			0xb4
+#define SYSMGR_SOC64_IO_PA_CTRL			0xb8
+#define SYSMGR_SOC64_NOC_TIMEOUT		0xc0
+#define SYSMGR_SOC64_NOC_IDLEREQ_SET		0xc4
+#define SYSMGR_SOC64_NOC_IDLEREQ_CLR		0xc8
+#define SYSMGR_SOC64_NOC_IDLEREQ_VAL		0xcc
+#define SYSMGR_SOC64_NOC_IDLEACK		0xd0
+#define SYSMGR_SOC64_NOC_IDLESTATUS		0xd4
+#define SYSMGR_SOC64_FPGA2SOC_CTRL		0xd8
+#define SYSMGR_SOC64_FPGA_CONFIG		0xdc
+#define SYSMGR_SOC64_IOCSRCLK_GATE		0xe0
+#define SYSMGR_SOC64_GPO			0xe4
+#define SYSMGR_SOC64_GPI			0xe8
+#define SYSMGR_SOC64_MPU			0xf0
+/*
+ * Bits[31:28] reserved for N5X DDR retention, bits[27:0] reserved for SOC 64-bit
+ * storing qspi ref clock (kHz)
+ */
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD0		0x200
+/* store osc1 clock freq */
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD1		0x204
+/* store fpga clock freq */
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD2		0x208
+/* reserved for customer use */
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD3		0x20c
+/* store PSCI_CPU_ON value */
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD4		0x210
+/* store PSCI_CPU_ON value */
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD5		0x214
+/* store VBAR_EL3 value */
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD6		0x218
+/* store VBAR_EL3 value */
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD7		0x21c
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD8		0x220
+#define SYSMGR_SOC64_BOOT_SCRATCH_COLD9		0x224
+#define SYSMGR_SOC64_PINSEL0			0x1000
+#define SYSMGR_SOC64_IOCTRL0			0x1130
+#define SYSMGR_SOC64_EMAC0_USEFPGA		0x1300
+#define SYSMGR_SOC64_EMAC1_USEFPGA		0x1304
+#define SYSMGR_SOC64_EMAC2_USEFPGA		0x1308
+#define SYSMGR_SOC64_I2C0_USEFPGA		0x130c
+#define SYSMGR_SOC64_I2C1_USEFPGA		0x1310
+#define SYSMGR_SOC64_I2C_EMAC0_USEFPGA		0x1314
+#define SYSMGR_SOC64_I2C_EMAC1_USEFPGA		0x1318
+#define SYSMGR_SOC64_I2C_EMAC2_USEFPGA		0x131c
+#define SYSMGR_SOC64_NAND_USEFPGA		0x1320
+#define SYSMGR_SOC64_SPIM0_USEFPGA		0x1328
+#define SYSMGR_SOC64_SPIM1_USEFPGA		0x132c
+#define SYSMGR_SOC64_SPIS0_USEFPGA		0x1330
+#define SYSMGR_SOC64_SPIS1_USEFPGA		0x1334
+#define SYSMGR_SOC64_UART0_USEFPGA		0x1338
+#define SYSMGR_SOC64_UART1_USEFPGA		0x133c
+#define SYSMGR_SOC64_MDIO0_USEFPGA		0x1340
+#define SYSMGR_SOC64_MDIO1_USEFPGA		0x1344
+#define SYSMGR_SOC64_MDIO2_USEFPGA		0x1348
+#define SYSMGR_SOC64_JTAG_USEFPGA		0x1350
+#define SYSMGR_SOC64_SDMMC_USEFPGA		0x1354
+#define SYSMGR_SOC64_HPS_OSC_CLK		0x1358
+#define SYSMGR_SOC64_IODELAY0			0x1400
+
+/*
+ * Bits for SYSMGR_SOC64_BOOT_SCRATCH_COLD0
+ * Bits[31:28] reserved for DM DDR retention, bits[27:0] reserved for SOC 64-bit
+ * storing qspi ref clock (kHz)
+ */
+#define SYSMGR_SCRATCH_REG_0_QSPI_REFCLK_MASK		GENMASK(27, 0)
+#define ALT_SYSMGR_SCRATCH_REG_0_DDR_RETENTION_MASK	BIT(31)
+#define ALT_SYSMGR_SCRATCH_REG_0_DDR_SHA_MASK		BIT(30)
+#define ALT_SYSMGR_SCRATCH_REG_0_DDR_RESET_TYPE_MASK	(BIT(29) | BIT(28))
+#define ALT_SYSMGR_SCRATCH_REG_0_DDR_RESET_TYPE_SHIFT	28
+
+#define SYSMGR_SDMMC				SYSMGR_SOC64_SDMMC
+
+#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX	BIT(0)
+#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO	BIT(1)
+#define SYSMGR_ECC_OCRAM_EN	BIT(0)
+#define SYSMGR_ECC_OCRAM_SERR	BIT(3)
+#define SYSMGR_ECC_OCRAM_DERR	BIT(4)
+#define SYSMGR_FPGACONFIG_FPGA_COMPLETE		BIT(0)
+#define SYSMGR_FPGACONFIG_EARLY_USERMODE	BIT(1)
+#define SYSMGR_FPGACONFIG_READY_MASK	(SYSMGR_FPGACONFIG_FPGA_COMPLETE | \
+					 SYSMGR_FPGACONFIG_EARLY_USERMODE)
+
+#define SYSMGR_FPGAINTF_USEFPGA	0x1
+#define SYSMGR_FPGAINTF_NAND	BIT(4)
+#define SYSMGR_FPGAINTF_SDMMC	BIT(8)
+#define SYSMGR_FPGAINTF_SPIM0	BIT(16)
+#define SYSMGR_FPGAINTF_SPIM1	BIT(24)
+#define SYSMGR_FPGAINTF_EMAC0	BIT(0)
+#define SYSMGR_FPGAINTF_EMAC1	BIT(8)
+#define SYSMGR_FPGAINTF_EMAC2	BIT(16)
+
+#define SYSMGR_SDMMC_SMPLSEL_SHIFT	4
+#define SYSMGR_SDMMC_DRVSEL_SHIFT	0
+
+/* EMAC Group Bit definitions */
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII	0x0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII		0x1
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII		0x2
+
+#define SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB			0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB			2
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK			0x3
+
+#define SYSMGR_NOC_H2F_MSK		0x00000001
+#define SYSMGR_NOC_LWH2F_MSK		0x00000010
+#define SYSMGR_HMC_CLK_STATUS_MSK	0x00000001
+
+#define SYSMGR_DMA_IRQ_NS		0xFF000000
+#define SYSMGR_DMA_MGR_NS		0x00010000
+
+#define SYSMGR_DMAPERIPH_ALL_NS		0xFFFFFFFF
+
+#define SYSMGR_WDDBG_PAUSE_ALL_CPU	0x0F0F0F0F
+
+#endif /* _SYSTEM_MANAGER_SOC64_H_ */
diff --git a/roms/u-boot/arch/arm/mach-socfpga/include/mach/timer.h b/roms/u-boot/arch/arm/mach-socfpga/include/mach/timer.h
new file mode 100644
index 000000000..82596e412
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/include/mach/timer.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#ifndef _SOCFPGA_TIMER_H_
+#define _SOCFPGA_TIMER_H_
+
+struct socfpga_timer {
+	u32	load_val;
+	u32	curr_val;
+	u32	ctrl;
+	u32	eoi;
+	u32	int_stat;
+};
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-socfpga/lowlevel_init_soc64.S b/roms/u-boot/arch/arm/mach-socfpga/lowlevel_init_soc64.S
new file mode 100644
index 000000000..612ea8a03
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/lowlevel_init_soc64.S
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2020 Intel Corporation. All rights reserved
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+ENTRY(lowlevel_init)
+	mov	x29, lr			/* Save LR */
+
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF)
+wait_for_atf:
+	ldr	x4, =CPU_RELEASE_ADDR
+	ldr	x5, [x4]
+	cbz	x5, slave_wait_atf
+	br	x5
+slave_wait_atf:
+	branch_if_slave x0, wait_for_atf
+#else
+	branch_if_slave x0, 1f
+#endif
+	ldr	x0, =GICD_BASE
+	bl	gic_init_secure
+1:
+#if defined(CONFIG_GICV3)
+	ldr	x0, =GICR_BASE
+	bl	gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+	ldr	x0, =GICD_BASE
+	ldr	x1, =GICC_BASE
+	bl	gic_init_secure_percpu
+#endif
+#endif
+
+#ifdef CONFIG_ARMV8_MULTIENTRY
+	branch_if_master x0, x1, 2f
+
+	/*
+	 * Slave should wait for master clearing spin table.
+	 * This sync prevent slaves observing incorrect
+	 * value of spin table and jumping to wrong place.
+	 */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_GICV2
+	ldr	x0, =GICC_BASE
+#endif
+	bl	gic_wait_for_interrupt
+#endif
+
+	/*
+	 * All slaves will enter EL2 and optionally EL1.
+	 */
+	adr	x4, lowlevel_in_el2
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el2
+
+lowlevel_in_el2:
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x4, lowlevel_in_el1
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el1
+
+lowlevel_in_el1:
+#endif
+
+#endif /* CONFIG_ARMV8_MULTIENTRY */
+
+2:
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-socfpga/mailbox_s10.c b/roms/u-boot/arch/arm/mach-socfpga/mailbox_s10.c
new file mode 100644
index 000000000..101af2385
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/mailbox_s10.c
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/system_manager.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/secure.h>
+#include <asm/system.h>
+#include <hang.h>
+#include <wait_bit.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MBOX_READL(reg)			\
+	 readl(SOCFPGA_MAILBOX_ADDRESS + (reg))
+
+#define MBOX_WRITEL(data, reg)		\
+	writel(data, SOCFPGA_MAILBOX_ADDRESS + (reg))
+
+#define MBOX_READ_RESP_BUF(rout)	\
+	MBOX_READL(MBOX_RESP_BUF + ((rout) * sizeof(u32)))
+
+#define MBOX_WRITE_CMD_BUF(data, cin)	\
+	MBOX_WRITEL(data, MBOX_CMD_BUF + ((cin) * sizeof(u32)))
+
+static __always_inline int mbox_polling_resp(u32 rout)
+{
+	u32 rin;
+	unsigned long i = 2000;
+
+	while (i) {
+		rin = MBOX_READL(MBOX_RIN);
+		if (rout != rin)
+			return 0;
+
+		udelay(1000);
+		i--;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static __always_inline int mbox_is_cmdbuf_full(u32 cin)
+{
+	return (((cin + 1) % MBOX_CMD_BUFFER_SIZE) == MBOX_READL(MBOX_COUT));
+}
+
+static __always_inline int mbox_is_cmdbuf_empty(u32 cin)
+{
+	return (((MBOX_READL(MBOX_COUT) + 1) % MBOX_CMD_BUFFER_SIZE) == cin);
+}
+
+static __always_inline int mbox_wait_for_cmdbuf_empty(u32 cin)
+{
+	int timeout = 2000;
+
+	while (timeout) {
+		if (mbox_is_cmdbuf_empty(cin))
+			return 0;
+		udelay(1000);
+		timeout--;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static __always_inline int mbox_write_cmd_buffer(u32 *cin, u32 data,
+						 int *is_cmdbuf_overflow)
+{
+	int timeout = 1000;
+
+	while (timeout) {
+		if (mbox_is_cmdbuf_full(*cin)) {
+			if (is_cmdbuf_overflow &&
+			    *is_cmdbuf_overflow == 0) {
+				/* Trigger SDM doorbell */
+				MBOX_WRITEL(1, MBOX_DOORBELL_TO_SDM);
+				*is_cmdbuf_overflow = 1;
+			}
+			udelay(1000);
+		} else {
+			/* write header to circular buffer */
+			MBOX_WRITE_CMD_BUF(data, (*cin)++);
+			*cin %= MBOX_CMD_BUFFER_SIZE;
+			MBOX_WRITEL(*cin, MBOX_CIN);
+			break;
+		}
+		timeout--;
+	}
+
+	if (!timeout)
+		return -ETIMEDOUT;
+
+	/* Wait for the SDM to drain the FIFO command buffer */
+	if (is_cmdbuf_overflow && *is_cmdbuf_overflow)
+		return mbox_wait_for_cmdbuf_empty(*cin);
+
+	return 0;
+}
+
+/* Check for available slot and write to circular buffer.
+ * It also update command valid offset (cin) register.
+ */
+static __always_inline int mbox_fill_cmd_circular_buff(u32 header, u32 len,
+						       u32 *arg)
+{
+	int i, ret;
+	int is_cmdbuf_overflow = 0;
+	u32 cin = MBOX_READL(MBOX_CIN) % MBOX_CMD_BUFFER_SIZE;
+
+	ret = mbox_write_cmd_buffer(&cin, header, &is_cmdbuf_overflow);
+	if (ret)
+		return ret;
+
+	/* write arguments */
+	for (i = 0; i < len; i++) {
+		is_cmdbuf_overflow = 0;
+		ret = mbox_write_cmd_buffer(&cin, arg[i], &is_cmdbuf_overflow);
+		if (ret)
+			return ret;
+	}
+
+	/* If SDM doorbell is not triggered after the last data is
+	 * written into mailbox FIFO command buffer, trigger the
+	 * SDM doorbell again to ensure SDM able to read the remaining
+	 * data.
+	 */
+	if (!is_cmdbuf_overflow)
+		MBOX_WRITEL(1, MBOX_DOORBELL_TO_SDM);
+
+	return 0;
+}
+
+/* Check the command and fill it into circular buffer */
+static __always_inline int mbox_prepare_cmd_only(u8 id, u32 cmd,
+						 u8 is_indirect, u32 len,
+						 u32 *arg)
+{
+	u32 header;
+	int ret;
+
+	if (cmd > MBOX_MAX_CMD_INDEX)
+		return -EINVAL;
+
+	header = MBOX_CMD_HEADER(MBOX_CLIENT_ID_UBOOT, id, len,
+				 (is_indirect) ? 1 : 0, cmd);
+
+	ret = mbox_fill_cmd_circular_buff(header, len, arg);
+
+	return ret;
+}
+
+/* Send command only without waiting for responses from SDM */
+static __always_inline int mbox_send_cmd_only_common(u8 id, u32 cmd,
+						     u8 is_indirect, u32 len,
+						     u32 *arg)
+{
+	return mbox_prepare_cmd_only(id, cmd, is_indirect, len, arg);
+}
+
+/* Return number of responses received in buffer */
+static __always_inline int __mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len)
+{
+	u32 rin;
+	u32 rout;
+	u32 resp_len = 0;
+
+	/* clear doorbell from SDM if it was SET */
+	if (MBOX_READL(MBOX_DOORBELL_FROM_SDM) & 1)
+		MBOX_WRITEL(0, MBOX_DOORBELL_FROM_SDM);
+
+	/* read current response offset */
+	rout = MBOX_READL(MBOX_ROUT);
+	/* read response valid offset */
+	rin = MBOX_READL(MBOX_RIN);
+
+	while (rin != rout && (resp_len < resp_buf_max_len)) {
+		/* Response received */
+		if (resp_buf)
+			resp_buf[resp_len++] = MBOX_READ_RESP_BUF(rout);
+
+		rout++;
+		/* wrapping around when it reach the buffer size */
+		rout %= MBOX_RESP_BUFFER_SIZE;
+		/* update next ROUT */
+		MBOX_WRITEL(rout, MBOX_ROUT);
+	}
+
+	return resp_len;
+}
+
+/* Support one command and up to 31 words argument length only */
+static __always_inline int mbox_send_cmd_common(u8 id, u32 cmd, u8 is_indirect,
+						u32 len, u32 *arg, u8 urgent,
+						u32 *resp_buf_len,
+						u32 *resp_buf)
+{
+	u32 rin;
+	u32 resp;
+	u32 rout;
+	u32 status;
+	u32 resp_len;
+	u32 buf_len;
+	int ret;
+
+	if (urgent) {
+		/* Read status because it is toggled */
+		status = MBOX_READL(MBOX_STATUS) & MBOX_STATUS_UA_MSK;
+		/* Write urgent command to urgent register */
+		MBOX_WRITEL(cmd, MBOX_URG);
+		/* write doorbell */
+		MBOX_WRITEL(1, MBOX_DOORBELL_TO_SDM);
+	} else {
+		ret = mbox_prepare_cmd_only(id, cmd, is_indirect, len, arg);
+		if (ret)
+			return ret;
+	}
+
+	while (1) {
+		ret = 1000;
+
+		/* Wait for doorbell from SDM */
+		do {
+			if (MBOX_READL(MBOX_DOORBELL_FROM_SDM))
+				break;
+			udelay(1000);
+		} while (--ret);
+
+		if (!ret)
+			return -ETIMEDOUT;
+
+		/* clear interrupt */
+		MBOX_WRITEL(0, MBOX_DOORBELL_FROM_SDM);
+
+		if (urgent) {
+			u32 new_status = MBOX_READL(MBOX_STATUS);
+
+			/* Urgent ACK is toggled */
+			if ((new_status & MBOX_STATUS_UA_MSK) ^ status)
+				return 0;
+
+			return -ECOMM;
+		}
+
+		/* read current response offset */
+		rout = MBOX_READL(MBOX_ROUT);
+
+		/* read response valid offset */
+		rin = MBOX_READL(MBOX_RIN);
+
+		if (rout != rin) {
+			/* Response received */
+			resp = MBOX_READ_RESP_BUF(rout);
+			rout++;
+			/* wrapping around when it reach the buffer size */
+			rout %= MBOX_RESP_BUFFER_SIZE;
+			/* update next ROUT */
+			MBOX_WRITEL(rout, MBOX_ROUT);
+
+			/* check client ID and ID */
+			if ((MBOX_RESP_CLIENT_GET(resp) ==
+			     MBOX_CLIENT_ID_UBOOT) &&
+			    (MBOX_RESP_ID_GET(resp) == id)) {
+				int resp_err = MBOX_RESP_ERR_GET(resp);
+
+				if (resp_buf_len) {
+					buf_len = *resp_buf_len;
+					*resp_buf_len = 0;
+				} else {
+					buf_len = 0;
+				}
+
+				resp_len = MBOX_RESP_LEN_GET(resp);
+				while (resp_len) {
+					ret = mbox_polling_resp(rout);
+					if (ret)
+						return ret;
+					/* we need to process response buffer
+					 * even caller doesn't need it
+					 */
+					resp = MBOX_READ_RESP_BUF(rout);
+					rout++;
+					resp_len--;
+					rout %= MBOX_RESP_BUFFER_SIZE;
+					MBOX_WRITEL(rout, MBOX_ROUT);
+					if (buf_len) {
+						/* copy response to buffer */
+						resp_buf[*resp_buf_len] = resp;
+						(*resp_buf_len)++;
+						buf_len--;
+					}
+				}
+				return resp_err;
+			}
+		}
+	}
+
+	return -EIO;
+}
+
+static __always_inline int mbox_send_cmd_common_retry(u8 id, u32 cmd,
+						      u8 is_indirect,
+						      u32 len, u32 *arg,
+						      u8 urgent,
+						      u32 *resp_buf_len,
+						      u32 *resp_buf)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		ret = mbox_send_cmd_common(id, cmd, is_indirect, len, arg,
+					   urgent, resp_buf_len, resp_buf);
+		if (ret == MBOX_RESP_TIMEOUT || ret == MBOX_RESP_DEVICE_BUSY)
+			udelay(2000); /* wait for 2ms before resend */
+		else
+			break;
+	}
+
+	return ret;
+}
+
+int mbox_init(void)
+{
+	int ret;
+
+	/* enable mailbox interrupts */
+	MBOX_WRITEL(MBOX_ALL_INTRS, MBOX_FLAGS);
+
+	/* Ensure urgent request is cleared */
+	MBOX_WRITEL(0, MBOX_URG);
+
+	/* Ensure the Doorbell Interrupt is cleared */
+	MBOX_WRITEL(0, MBOX_DOORBELL_FROM_SDM);
+
+	ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RESTART, MBOX_CMD_DIRECT, 0,
+			    NULL, 1, 0, NULL);
+	if (ret)
+		return ret;
+
+	/* Renable mailbox interrupts after MBOX_RESTART */
+	MBOX_WRITEL(MBOX_ALL_INTRS, MBOX_FLAGS);
+
+	return 0;
+}
+
+#ifdef CONFIG_CADENCE_QSPI
+int mbox_qspi_close(void)
+{
+	return mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_CLOSE, MBOX_CMD_DIRECT,
+			     0, NULL, 0, 0, NULL);
+}
+
+int mbox_qspi_open(void)
+{
+	int ret;
+	u32 resp_buf[1];
+	u32 resp_buf_len;
+
+	ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_OPEN, MBOX_CMD_DIRECT,
+			    0, NULL, 0, 0, NULL);
+	if (ret) {
+		/* retry again by closing and reopen the QSPI again */
+		ret = mbox_qspi_close();
+		if (ret)
+			return ret;
+
+		ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_OPEN,
+				    MBOX_CMD_DIRECT, 0, NULL, 0, 0, NULL);
+		if (ret)
+			return ret;
+	}
+
+	/* HPS will directly control the QSPI controller, no longer mailbox */
+	resp_buf_len = 1;
+	ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_DIRECT, MBOX_CMD_DIRECT,
+			    0, NULL, 0, (u32 *)&resp_buf_len,
+			    (u32 *)&resp_buf);
+	if (ret)
+		goto error;
+
+	/* Store QSPI controller ref clock frequency */
+	ret = cm_set_qspi_controller_clk_hz(resp_buf[0]);
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	mbox_qspi_close();
+
+	return ret;
+}
+#endif /* CONFIG_CADENCE_QSPI */
+
+int mbox_reset_cold(void)
+{
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF)
+	psci_system_reset();
+#else
+	int ret;
+
+	ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_REBOOT_HPS, MBOX_CMD_DIRECT,
+			    0, NULL, 0, 0, NULL);
+	if (ret) {
+		/* mailbox sent failure, wait for watchdog to kick in */
+		hang();
+	}
+#endif
+	return 0;
+}
+
+/* Accepted commands: CONFIG_STATUS or RECONFIG_STATUS */
+static __always_inline int mbox_get_fpga_config_status_common(u32 cmd)
+{
+	u32 reconfig_status_resp_len;
+	u32 reconfig_status_resp[RECONFIG_STATUS_RESPONSE_LEN];
+	int ret;
+
+	reconfig_status_resp_len = RECONFIG_STATUS_RESPONSE_LEN;
+	ret = mbox_send_cmd_common_retry(MBOX_ID_UBOOT, cmd,
+					 MBOX_CMD_DIRECT, 0, NULL, 0,
+					 &reconfig_status_resp_len,
+					 reconfig_status_resp);
+
+	if (ret)
+		return ret;
+
+	/* Check for any error */
+	ret = reconfig_status_resp[RECONFIG_STATUS_STATE];
+	if (ret && ret != MBOX_CFGSTAT_STATE_CONFIG)
+		return ret;
+
+	/* Make sure nStatus is not 0 */
+	ret = reconfig_status_resp[RECONFIG_STATUS_PIN_STATUS];
+	if (!(ret & RCF_PIN_STATUS_NSTATUS))
+		return MBOX_CFGSTAT_STATE_ERROR_HARDWARE;
+
+	ret = reconfig_status_resp[RECONFIG_STATUS_SOFTFUNC_STATUS];
+	if (ret & RCF_SOFTFUNC_STATUS_SEU_ERROR)
+		return MBOX_CFGSTAT_STATE_ERROR_HARDWARE;
+
+	if ((ret & RCF_SOFTFUNC_STATUS_CONF_DONE) &&
+	    (ret & RCF_SOFTFUNC_STATUS_INIT_DONE) &&
+	    !reconfig_status_resp[RECONFIG_STATUS_STATE])
+		return 0;	/* configuration success */
+
+	return MBOX_CFGSTAT_STATE_CONFIG;
+}
+
+int mbox_get_fpga_config_status(u32 cmd)
+{
+	return mbox_get_fpga_config_status_common(cmd);
+}
+
+int __secure mbox_get_fpga_config_status_psci(u32 cmd)
+{
+	return mbox_get_fpga_config_status_common(cmd);
+}
+
+int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
+		  u8 urgent, u32 *resp_buf_len, u32 *resp_buf)
+{
+	return mbox_send_cmd_common_retry(id, cmd, is_indirect, len, arg,
+					  urgent, resp_buf_len, resp_buf);
+}
+
+int __secure mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len,
+				u32 *arg, u8 urgent, u32 *resp_buf_len,
+				u32 *resp_buf)
+{
+	return mbox_send_cmd_common_retry(id, cmd, is_indirect, len, arg,
+					  urgent, resp_buf_len, resp_buf);
+}
+
+int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg)
+{
+	return mbox_send_cmd_only_common(id, cmd, is_indirect, len, arg);
+}
+
+int __secure mbox_send_cmd_only_psci(u8 id, u32 cmd, u8 is_indirect, u32 len,
+				     u32 *arg)
+{
+	return mbox_send_cmd_only_common(id, cmd, is_indirect, len, arg);
+}
+
+int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len)
+{
+	return __mbox_rcv_resp(resp_buf, resp_buf_max_len);
+}
+
+int __secure mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len)
+{
+	return __mbox_rcv_resp(resp_buf, resp_buf_max_len);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/misc.c b/roms/u-boot/arch/arm/mach-socfpga/misc.c
new file mode 100644
index 000000000..64a7c9d65
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/misc.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <asm/cache.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <linux/libfdt.h>
+#include <altera.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <watchdog.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/scan_manager.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/nic301.h>
+#include <asm/arch/scu.h>
+#include <asm/pl310.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+phys_addr_t socfpga_clkmgr_base __section(".data");
+phys_addr_t socfpga_rstmgr_base __section(".data");
+phys_addr_t socfpga_sysmgr_base __section(".data");
+
+#ifdef CONFIG_SYS_L2_PL310
+static const struct pl310_regs *const pl310 =
+	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+#endif
+
+struct bsel bsel_str[] = {
+	{ "rsvd", "Reserved", },
+	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
+	{ "nand", "NAND Flash (1.8V)", },
+	{ "nand", "NAND Flash (3.0V)", },
+	{ "sd", "SD/MMC External Transceiver (1.8V)", },
+	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
+	{ "qspi", "QSPI Flash (1.8V)", },
+	{ "qspi", "QSPI Flash (3.0V)", },
+};
+
+int dram_init(void)
+{
+	if (fdtdec_setup_mem_size_base() != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+void enable_caches(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
+	icache_enable();
+#endif
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	dcache_enable();
+#endif
+}
+
+#ifdef CONFIG_SYS_L2_PL310
+void v7_outer_cache_enable(void)
+{
+	struct udevice *dev;
+
+	if (uclass_get_device(UCLASS_CACHE, 0, &dev))
+		pr_err("cache controller driver NOT found!\n");
+}
+
+void v7_outer_cache_disable(void)
+{
+	/* Disable the L2 cache */
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+
+void socfpga_pl310_clear(void)
+{
+	u32 mask = 0xff, ena = 0;
+
+	icache_enable();
+
+	/* Disable the L2 cache */
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+
+	writel(0x0, &pl310->pl310_tag_latency_ctrl);
+	writel(0x10, &pl310->pl310_data_latency_ctrl);
+
+	/* enable BRESP, instruction and data prefetch, full line of zeroes */
+	setbits_le32(&pl310->pl310_aux_ctrl,
+		     L310_AUX_CTRL_DATA_PREFETCH_MASK |
+		     L310_AUX_CTRL_INST_PREFETCH_MASK |
+		     L310_SHARED_ATT_OVERRIDE_ENABLE);
+
+	/* Enable the L2 cache */
+	ena = readl(&pl310->pl310_ctrl);
+	ena |= L2X0_CTRL_EN;
+
+	/*
+	 * Invalidate the PL310 L2 cache. Keep the invalidation code
+	 * entirely in L1 I-cache to avoid any bus traffic through
+	 * the L2.
+	 */
+	asm volatile(
+		".align	5			\n"
+		"	b	3f		\n"
+		"1:	str	%1,	[%4]	\n"
+		"	dsb			\n"
+		"	isb			\n"
+		"	str	%0,	[%2]	\n"
+		"	dsb			\n"
+		"	isb			\n"
+		"2:	ldr	%0,	[%2]	\n"
+		"	cmp	%0,	#0	\n"
+		"	bne	2b		\n"
+		"	str	%0,	[%3]	\n"
+		"	dsb			\n"
+		"	isb			\n"
+		"	b	4f		\n"
+		"3:	b	1b		\n"
+		"4:	nop			\n"
+	: "+r"(mask), "+r"(ena)
+	: "r"(&pl310->pl310_inv_way),
+	  "r"(&pl310->pl310_cache_sync), "r"(&pl310->pl310_ctrl)
+	: "memory", "cc");
+
+	/* Disable the L2 cache */
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+#endif
+
+#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
+defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
+int overwrite_console(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FPGA
+/* add device descriptor to FPGA device table */
+void socfpga_fpga_add(void *fpga_desc)
+{
+	fpga_init();
+	fpga_add(fpga_altera, fpga_desc);
+}
+#endif
+
+int arch_cpu_init(void)
+{
+	socfpga_get_managers_addr();
+
+#ifdef CONFIG_HW_WATCHDOG
+	/*
+	 * In case the watchdog is enabled, make sure to (re-)configure it
+	 * so that the defined timeout is valid. Otherwise the SPL (Perloader)
+	 * timeout value is still active which might too short for Linux
+	 * booting.
+	 */
+	hw_watchdog_init();
+#else
+	/*
+	 * If the HW watchdog is NOT enabled, make sure it is not running,
+	 * for example because it was enabled in the preloader. This might
+	 * trigger a watchdog-triggered reboot of Linux kernel later.
+	 * Toggle watchdog reset, so watchdog in not running state.
+	 */
+	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
+	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
+#endif
+
+	return 0;
+}
+
+#ifndef CONFIG_SPL_BUILD
+static int do_bridge(struct cmd_tbl *cmdtp, int flag, int argc,
+		     char *const argv[])
+{
+	unsigned int mask = ~0;
+
+	if (argc < 2 || argc > 3)
+		return CMD_RET_USAGE;
+
+	argv++;
+
+	if (argc == 3)
+		mask = simple_strtoul(argv[1], NULL, 16);
+
+	switch (*argv[0]) {
+	case 'e':	/* Enable */
+		do_bridge_reset(1, mask);
+		break;
+	case 'd':	/* Disable */
+		do_bridge_reset(0, mask);
+		break;
+	default:
+		return CMD_RET_USAGE;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(bridge, 3, 1, do_bridge,
+	   "SoCFPGA HPS FPGA bridge control",
+	   "enable [mask] - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+	   "bridge disable [mask] - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+	   ""
+);
+
+#endif
+
+static int socfpga_get_base_addr(const char *compat, phys_addr_t *base)
+{
+	const void *blob = gd->fdt_blob;
+	struct fdt_resource r;
+	int node;
+	int ret;
+
+	node = fdt_node_offset_by_compatible(blob, -1, compat);
+	if (node < 0)
+		return node;
+
+	if (!fdtdec_get_is_enabled(blob, node))
+		return -ENODEV;
+
+	ret = fdt_get_resource(blob, node, "reg", 0, &r);
+	if (ret)
+		return ret;
+
+	*base = (phys_addr_t)r.start;
+
+	return 0;
+}
+
+void socfpga_get_managers_addr(void)
+{
+	int ret;
+
+	ret = socfpga_get_base_addr("altr,rst-mgr", &socfpga_rstmgr_base);
+	if (ret)
+		hang();
+
+	ret = socfpga_get_base_addr("altr,sys-mgr", &socfpga_sysmgr_base);
+	if (ret)
+		hang();
+
+#ifdef CONFIG_TARGET_SOCFPGA_AGILEX
+	ret = socfpga_get_base_addr("intel,agilex-clkmgr",
+				    &socfpga_clkmgr_base);
+#else
+	ret = socfpga_get_base_addr("altr,clk-mgr", &socfpga_clkmgr_base);
+#endif
+	if (ret)
+		hang();
+}
+
+phys_addr_t socfpga_get_rstmgr_addr(void)
+{
+	return socfpga_rstmgr_base;
+}
+
+phys_addr_t socfpga_get_sysmgr_addr(void)
+{
+	return socfpga_sysmgr_base;
+}
+
+phys_addr_t socfpga_get_clkmgr_addr(void)
+{
+	return socfpga_clkmgr_base;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/misc_arria10.c b/roms/u-boot/arch/arm/mach-socfpga/misc_arria10.c
new file mode 100644
index 000000000..bf978053c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/misc_arria10.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ */
+
+#include <altera.h>
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <ns16550.h>
+#include <watchdog.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/reset_manager_arria10.h>
+#include <asm/arch/sdram_arria10.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/nic301.h>
+#include <asm/io.h>
+#include <asm/pl310.h>
+
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3	0x08
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11	0x58
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3	0x68
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7	0x18
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7	0x78
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3	0x98
+
+/*
+ * FPGA programming support for SoC FPGA Arria 10
+ */
+static Altera_desc altera_fpga[] = {
+	{
+		/* Family */
+		Altera_SoCFPGA,
+		/* Interface type */
+		fast_passive_parallel,
+		/* No limitation as additional data will be ignored */
+		-1,
+		/* No device function table */
+		NULL,
+		/* Base interface address specified in driver */
+		NULL,
+		/* No cookie implementation */
+		0
+	},
+};
+
+#if defined(CONFIG_SPL_BUILD)
+static struct pl310_regs *const pl310 =
+	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
+	(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
+
+/*
++ * This function initializes security policies to be consistent across
++ * all logic units in the Arria 10.
++ *
++ * The idea is to set all security policies to be normal, nonsecure
++ * for all units.
++ */
+void socfpga_init_security_policies(void)
+{
+	/* Put OCRAM in non-secure */
+	writel(0x003f0000, &noc_fw_ocram_base->region0);
+	writel(0x1, &noc_fw_ocram_base->enable);
+
+	/* Put DDR in non-secure */
+	writel(0xffff0000, SOCFPGA_SDR_FIREWALL_L3_ADDRESS + 0xc);
+	writel(0x1, SOCFPGA_SDR_FIREWALL_L3_ADDRESS);
+
+	/* Enable priviledged and non-priviledged access to L4 peripherals */
+	writel(~0, SOCFPGA_NOC_L4_PRIV_FLT_OFST);
+
+	/* Enable secure and non-secure transactions to bridges */
+	writel(~0, SOCFPGA_NOC_FW_H2F_SCR_OFST);
+	writel(~0, SOCFPGA_NOC_FW_H2F_SCR_OFST + 4);
+
+	writel(0x0007FFFF,
+	       socfpga_get_sysmgr_addr() + SYSMGR_A10_ECC_INTMASK_SET);
+}
+
+void socfpga_sdram_remap_zero(void)
+{
+	/* Configure the L2 controller to make SDRAM start at 0 */
+	writel(0x1, &pl310->pl310_addr_filter_start);
+}
+#endif
+
+int arch_early_init_r(void)
+{
+	/* Add device descriptor to FPGA device table */
+	socfpga_fpga_add(&altera_fpga[0]);
+
+	return 0;
+}
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	const u32 bootinfo = readl(socfpga_get_sysmgr_addr() +
+				   SYSMGR_A10_BOOTINFO);
+	const u32 bsel = SYSMGR_GET_BOOTINFO_BSEL(bootinfo);
+
+	puts("CPU:   Altera SoCFPGA Arria 10\n");
+
+	printf("BOOT:  %s\n", bsel_str[bsel].name);
+	return 0;
+}
+#endif
+
+void do_bridge_reset(int enable, unsigned int mask)
+{
+	if (enable)
+		socfpga_reset_deassert_bridges_handoff();
+	else
+		socfpga_bridges_reset();
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/misc_gen5.c b/roms/u-boot/arch/arm/mach-socfpga/misc_gen5.c
new file mode 100644
index 000000000..4edf4f9b5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/misc_gen5.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <env.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <linux/bitops.h>
+#include <linux/libfdt.h>
+#include <altera.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <watchdog.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/nic301.h>
+#include <asm/arch/scu.h>
+#include <asm/pl310.h>
+
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pl310_regs *const pl310 =
+	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+static struct nic301_registers *nic301_regs =
+	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
+static struct scu_registers *scu_regs =
+	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
+
+/*
+ * FPGA programming support for SoC FPGA Cyclone V
+ */
+static Altera_desc altera_fpga[] = {
+	{
+		/* Family */
+		Altera_SoCFPGA,
+		/* Interface type */
+		fast_passive_parallel,
+		/* No limitation as additional data will be ignored */
+		-1,
+		/* No device function table */
+		NULL,
+		/* Base interface address specified in driver */
+		NULL,
+		/* No cookie implementation */
+		0
+	},
+};
+
+static const struct {
+	const u16	pn;
+	const char	*name;
+	const char	*var;
+} socfpga_fpga_model[] = {
+	/* Cyclone V E */
+	{ 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
+	{ 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
+	{ 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
+	{ 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
+	{ 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
+	/* Cyclone V GX/GT */
+	{ 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
+	{ 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
+	{ 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
+	{ 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
+	{ 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
+	/* Cyclone V SE/SX/ST */
+	{ 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
+	{ 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
+	{ 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
+	{ 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
+	/* Arria V */
+	{ 0x2d03, "Arria V, D5", "av_d5" },
+	/* Arria V ST/SX */
+	{ 0x2d13, "Arria V, ST/D3 or SX/B3", "av_st_d3" },
+};
+
+static int socfpga_fpga_id(const bool print_id)
+{
+	const u32 altera_mi = 0x6e;
+	const u32 id = scan_mgr_get_fpga_id();
+
+	const u32 lsb = id & 0x00000001;
+	const u32 mi = (id >> 1) & 0x000007ff;
+	const u32 pn = (id >> 12) & 0x0000ffff;
+	const u32 version = (id >> 28) & 0x0000000f;
+	int i;
+
+	if ((mi != altera_mi) || (lsb != 1)) {
+		printf("FPGA:  Not Altera chip ID\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
+		if (pn == socfpga_fpga_model[i].pn)
+			break;
+
+	if (i == ARRAY_SIZE(socfpga_fpga_model)) {
+		printf("FPGA:  Unknown Altera chip, ID 0x%08x\n", id);
+		return -EINVAL;
+	}
+
+	if (print_id)
+		printf("FPGA:  Altera %s, version 0x%01x\n",
+		       socfpga_fpga_model[i].name, version);
+	return i;
+}
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	const u32 bootinfo = readl(socfpga_get_sysmgr_addr() +
+				   SYSMGR_GEN5_BOOTINFO);
+	const u32 bsel = SYSMGR_GET_BOOTINFO_BSEL(bootinfo);
+
+	puts("CPU:   Altera SoCFPGA Platform\n");
+	socfpga_fpga_id(1);
+
+	printf("BOOT:  %s\n", bsel_str[bsel].name);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+	const u32 bsel = readl(socfpga_get_sysmgr_addr() +
+			       SYSMGR_GEN5_BOOTINFO) & 0x7;
+	const int fpga_id = socfpga_fpga_id(0);
+	env_set("bootmode", bsel_str[bsel].mode);
+	if (fpga_id >= 0)
+		env_set("fpgatype", socfpga_fpga_model[fpga_id].var);
+	return 0;
+}
+#endif
+
+/*
+ * Convert all NIC-301 AMBA slaves from secure to non-secure
+ */
+static void socfpga_nic301_slave_ns(void)
+{
+	writel(0x1, &nic301_regs->lwhps2fpgaregs);
+	writel(0x1, &nic301_regs->hps2fpgaregs);
+	writel(0x1, &nic301_regs->acp);
+	writel(0x1, &nic301_regs->rom);
+	writel(0x1, &nic301_regs->ocram);
+	writel(0x1, &nic301_regs->sdrdata);
+}
+
+void socfpga_sdram_remap_zero(void)
+{
+	u32 remap;
+
+	socfpga_nic301_slave_ns();
+
+	/*
+	 * Private components security:
+	 * U-Boot : configure private timer, global timer and cpu component
+	 * access as non secure for kernel stage (as required by Linux)
+	 */
+	setbits_le32(&scu_regs->sacr, 0xfff);
+
+	/* Configure the L2 controller to make SDRAM start at 0 */
+	remap = 0x1; /* remap.mpuzero */
+	/* Keep fpga bridge enabled when running from FPGA onchip RAM */
+	if (socfpga_is_booting_from_fpga())
+		remap |= 0x8; /* remap.hps2fpga */
+	writel(remap, &nic301_regs->remap);
+
+	writel(0x1, &pl310->pl310_addr_filter_start);
+}
+
+static u32 iswgrp_handoff[8];
+
+int arch_early_init_r(void)
+{
+	int i;
+
+	/*
+	 * Write magic value into magic register to unlock support for
+	 * issuing warm reset. The ancient kernel code expects this
+	 * value to be written into the register by the bootloader, so
+	 * to support that old code, we write it here instead of in the
+	 * reset_cpu() function just before resetting the CPU.
+	 */
+	writel(0xae9efebc,
+	       socfpga_get_sysmgr_addr() + SYSMGR_GEN5_WARMRAMGRP_EN);
+
+	for (i = 0; i < 8; i++)	/* Cache initial SW setting regs */
+		iswgrp_handoff[i] = readl(socfpga_get_sysmgr_addr() +
+					  SYSMGR_ISWGRP_HANDOFF_OFFSET(i));
+
+	socfpga_bridges_reset(1);
+
+	socfpga_sdram_remap_zero();
+
+	/* Add device descriptor to FPGA device table */
+	socfpga_fpga_add(&altera_fpga[0]);
+
+	return 0;
+}
+
+#ifndef CONFIG_SPL_BUILD
+static struct socfpga_sdr_ctrl *sdr_ctrl =
+	(struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS;
+
+void do_bridge_reset(int enable, unsigned int mask)
+{
+	int i;
+
+	if (enable) {
+		socfpga_bridges_set_handoff_regs(!(mask & BIT(0)),
+						 !(mask & BIT(1)),
+						 !(mask & BIT(2)));
+		for (i = 0; i < 2; i++) {	/* Reload SW setting cache */
+			iswgrp_handoff[i] =
+				readl(socfpga_get_sysmgr_addr() +
+				      SYSMGR_ISWGRP_HANDOFF_OFFSET(i));
+		}
+
+		writel(iswgrp_handoff[2],
+		       socfpga_get_sysmgr_addr() +
+		       SYSMGR_GEN5_FPGAINFGRP_MODULE);
+		writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst);
+		writel(iswgrp_handoff[0],
+		       socfpga_get_rstmgr_addr() + RSTMGR_GEN5_BRGMODRST);
+		writel(iswgrp_handoff[1], &nic301_regs->remap);
+
+		writel(0x7, socfpga_get_rstmgr_addr() + RSTMGR_GEN5_BRGMODRST);
+		writel(iswgrp_handoff[0],
+		       socfpga_get_rstmgr_addr() + RSTMGR_GEN5_BRGMODRST);
+	} else {
+		writel(0, socfpga_get_sysmgr_addr() +
+		       SYSMGR_GEN5_FPGAINFGRP_MODULE);
+		writel(0, &sdr_ctrl->fpgaport_rst);
+		writel(0x7, socfpga_get_rstmgr_addr() + RSTMGR_GEN5_BRGMODRST);
+		writel(1, &nic301_regs->remap);
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-socfpga/misc_s10.c b/roms/u-boot/arch/arm/mach-socfpga/misc_s10.c
new file mode 100644
index 000000000..50c7f19ae
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/misc_s10.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <altera.h>
+#include <common.h>
+#include <env.h>
+#include <errno.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * FPGA programming support for SoC FPGA Stratix 10
+ */
+static Altera_desc altera_fpga[] = {
+	{
+		/* Family */
+		Intel_FPGA_SDM_Mailbox,
+		/* Interface type */
+		secure_device_manager_mailbox,
+		/* No limitation as additional data will be ignored */
+		-1,
+		/* No device function table */
+		NULL,
+		/* Base interface address specified in driver */
+		NULL,
+		/* No cookie implementation */
+		0
+	},
+};
+
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	puts("CPU:   Intel FPGA SoCFPGA Platform (ARMv8 64bit Cortex-A53)\n");
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+	char qspi_string[13];
+
+	sprintf(qspi_string, "<0x%08x>", cm_get_qspi_controller_clk_hz());
+	env_set("qspi_clock", qspi_string);
+
+	return 0;
+}
+#endif
+
+int arch_early_init_r(void)
+{
+	socfpga_fpga_add(&altera_fpga[0]);
+
+	return 0;
+}
+
+/* Return 1 if FPGA is ready otherwise return 0 */
+int is_fpga_config_ready(void)
+{
+	return (readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_FPGA_CONFIG) &
+		SYSMGR_FPGACONFIG_READY_MASK) == SYSMGR_FPGACONFIG_READY_MASK;
+}
+
+void do_bridge_reset(int enable, unsigned int mask)
+{
+	/* Check FPGA status before bridge enable */
+	if (!is_fpga_config_ready()) {
+		puts("FPGA not ready. Bridge reset aborted!\n");
+		return;
+	}
+
+	socfpga_bridges_reset(enable);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/mmu-arm64_s10.c b/roms/u-boot/arch/arm/mach-socfpga/mmu-arm64_s10.c
new file mode 100644
index 000000000..a55b7b7cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/mmu-arm64_s10.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct mm_region socfpga_stratix10_mem_map[] = {
+	{
+		/* MEM 2GB*/
+		.virt	= 0x0UL,
+		.phys	= 0x0UL,
+		.size	= 0x80000000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+				PTE_BLOCK_INNER_SHARE,
+	}, {
+		/* FPGA 1.5GB */
+		.virt	= 0x80000000UL,
+		.phys	= 0x80000000UL,
+		.size	= 0x60000000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+				PTE_BLOCK_NON_SHARE |
+				PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+	}, {
+		/* DEVICE 142MB */
+		.virt	= 0xF7000000UL,
+		.phys	= 0xF7000000UL,
+		.size	= 0x08E00000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+				PTE_BLOCK_NON_SHARE |
+				PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+	}, {
+		/* OCRAM 1MB but available 256KB */
+		.virt	= 0xFFE00000UL,
+		.phys	= 0xFFE00000UL,
+		.size	= 0x00100000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+				PTE_BLOCK_INNER_SHARE,
+	}, {
+		/* DEVICE 32KB */
+		.virt	= 0xFFFC0000UL,
+		.phys	= 0xFFFC0000UL,
+		.size	= 0x00008000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+				PTE_BLOCK_NON_SHARE |
+				PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+	}, {
+		/* MEM 124GB */
+		.virt	= 0x0100000000UL,
+		.phys	= 0x0100000000UL,
+		.size	= 0x1F00000000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+				PTE_BLOCK_INNER_SHARE,
+	}, {
+		/* DEVICE 4GB */
+		.virt	= 0x2000000000UL,
+		.phys	= 0x2000000000UL,
+		.size	= 0x0100000000UL,
+		.attrs	= PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+				PTE_BLOCK_NON_SHARE |
+				PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+	}, {
+		/* List terminator */
+	},
+};
+
+struct mm_region *mem_map = socfpga_stratix10_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-socfpga/pinmux_arria10.c b/roms/u-boot/arch/arm/mach-socfpga/pinmux_arria10.c
new file mode 100644
index 000000000..f378fce7f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/pinmux_arria10.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
+ */
+
+#include <log.h>
+#include <asm/arch/pinmux.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fdtdec.h>
+
+static int do_pinctr_pin(const void *blob, int child, const char *node_name)
+{
+	int len;
+	fdt_addr_t base_addr;
+	fdt_size_t size;
+	const u32 *cell;
+	u32 offset, value;
+
+	base_addr = fdtdec_get_addr_size(blob, child, "reg", &size);
+	if (base_addr != FDT_ADDR_T_NONE) {
+		cell = fdt_getprop(blob, child, "pinctrl-single,pins", &len);
+		if (!cell || len <= 0)
+			return -EFAULT;
+
+		debug("%p %d\n", cell, len);
+		for (; len > 0; len -= (2 * sizeof(u32))) {
+			offset = fdt32_to_cpu(*cell++);
+			value = fdt32_to_cpu(*cell++);
+			debug("<0x%x 0x%x>\n", offset, value);
+			writel(value, base_addr + offset);
+		}
+		return 0;
+	}
+	return -EFAULT;
+}
+
+static int do_pinctrl_pins(const void *blob, int node, const char *child_name)
+{
+	int child, len;
+	const char *node_name;
+
+	child = fdt_first_subnode(blob, node);
+
+	if (child < 0)
+		return -EINVAL;
+
+	node_name = fdt_get_name(blob, child, &len);
+
+	while (node_name) {
+		if (!strcmp(child_name, node_name))
+			return do_pinctr_pin(blob, child, node_name);
+
+		child = fdt_next_subnode(blob, child);
+
+		if (child < 0)
+			break;
+
+		node_name = fdt_get_name(blob, child, &len);
+	}
+
+	return -EFAULT;
+}
+
+int config_dedicated_pins(const void *blob)
+{
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0,
+			COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+	if (node < 0)
+		return -EINVAL;
+
+	if (do_pinctrl_pins(blob, node, "dedicated_cfg"))
+		return -EFAULT;
+
+	if (do_pinctrl_pins(blob, node, "dedicated"))
+		return -EFAULT;
+
+	return 0;
+}
+
+int config_pins(const void *blob, const char *pin_grp)
+{
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0,
+			COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+	if (node < 0)
+		return -EINVAL;
+
+	if (do_pinctrl_pins(blob, node, pin_grp))
+		return -EFAULT;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/qts-filter-a10.sh b/roms/u-boot/arch/arm/mach-socfpga/qts-filter-a10.sh
new file mode 100755
index 000000000..57d77e8e1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/qts-filter-a10.sh
@@ -0,0 +1,141 @@
+#!/bin/bash
+
+#
+# helper function to convert from DOS to Unix, if necessary, and handle
+# lines ending in '\'.
+#
+fix_newlines_in_macros() {
+	sed -n ':next;s/\r$//;/[^\\]\\$/ {N;s/\\\n//;b next};p' $1
+}
+
+#filter out only what we need from a10 hps.xml
+grep_a10_hps_config() {
+	egrep "clk_hz|i_clk_mgr|i_io48_pin_mux|AXI_SLAVE|AXI_MASTER"
+}
+
+#
+# Process hps.xml
+# $1:	hps.xml
+# $2:	Output File
+#
+process_a10_hps_config() {
+	hps_xml="$1"
+	outfile="$2"
+
+	(cat << EOF
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Intel Arria 10 SoCFPGA configuration
+ */
+
+#ifndef __SOCFPGA_ARRIA10_CONFIG_H__
+#define __SOCFPGA_ARRIA10_CONFIG_H__
+
+EOF
+
+	echo "/* Clocks */"
+	fix_newlines_in_macros \
+		${hps_xml} | egrep "clk_hz" |
+			awk -F"'" '{ gsub("\\.","_",$2) ; \
+				print "#define" " " toupper($2) " " $4}' |
+			sed 's/\.[0-9]//' |
+			sed 's/I_CLK_MGR_//' |
+			sort
+	fix_newlines_in_macros \
+		${hps_xml} | egrep "i_clk_mgr_mainpll" |
+			awk -F"'" '{ gsub("\\.","_",$2) ; \
+				print "#define" " " toupper($2) " " $4}' |
+			sed 's/\.[0-9]//' |
+			sed 's/I_CLK_MGR_//' |
+			sort
+	fix_newlines_in_macros \
+		${hps_xml} | egrep "i_clk_mgr_perpll" |
+			awk -F"'" '{ gsub("\\.","_",$2) ; \
+				print "#define" " " toupper($2) " " $4}' |
+			sed 's/\.[0-9]//' |
+			sed 's/I_CLK_MGR_//' |
+			sort
+	fix_newlines_in_macros \
+		${hps_xml} | egrep "i_clk_mgr_clkmgr" |
+			awk -F"'" '{ gsub("\\.","_",$2) ; \
+				print "#define" " " toupper($2) " " $4}' |
+			sed 's/\.[0-9]//' |
+			sed 's/I_CLK_MGR_//' |
+			sort
+	fix_newlines_in_macros \
+		${hps_xml} | egrep "i_clk_mgr_alteragrp" |
+			awk -F"'" '{ gsub("\\.","_",$2) ; \
+				print "#define" " " toupper($2) " " $4}' |
+			sed 's/\.[0-9]//' |
+			sed 's/I_CLK_MGR_//' |
+			sort
+	echo "#define ALTERAGRP_MPUCLK ((ALTERAGRP_MPUCLK_PERICNT << 16) | \\"
+	echo "	(ALTERAGRP_MPUCLK_MAINCNT))"
+	echo "#define ALTERAGRP_NOCCLK ((ALTERAGRP_NOCCLK_PERICNT << 16) | \\"
+	echo "	(ALTERAGRP_NOCCLK_MAINCNT))"
+
+	echo
+	echo "/* Pin Mux Configuration */"
+	fix_newlines_in_macros \
+		${hps_xml} | egrep "i_io48_pin_mux" |
+			awk -F"'" '{ gsub("\\.","_",$2) ; \
+				print "#define" " " toupper($2) " " $4}' |
+			sed 's/I_IO48_PIN_MUX_//' |
+			sed 's/SHARED_3V_IO_GRP_//' |
+			sed 's/FPGA_INTERFACE_GRP_//' |
+			sed 's/DEDICATED_IO_GRP_//' |
+			sed 's/CONFIGURATION_DEDICATED/CONFIG/' |
+			sort
+
+	echo
+	echo "/* Bridge Configuration */"
+	fix_newlines_in_macros \
+		${hps_xml} | egrep "AXI_SLAVE|AXI_MASTER" |
+			awk -F"'" '{ gsub("\\.","_",$2) ; \
+				print "#define" " " toupper($2) " " $4}' |
+			sed 's/true/1/' |
+			sed 's/false/0/' |
+			sort
+
+	echo
+	echo "/* Voltage Select for Config IO */"
+	echo "#define CONFIG_IO_BANK_VSEL \\"
+	echo "	(((CONFIG_IO_BANK_VOLTAGE_SEL_CLKRST_IO & 0x3) << 8) | \\"
+	echo "	(CONFIG_IO_BANK_VOLTAGE_SEL_PERI_IO & 0x3))"
+
+	echo
+	echo "/* Macro for Config IO bit mapping */"
+	echo -n "#define CONFIG_IO_MACRO(NAME) "
+	echo "(((NAME ## _RTRIM & 0xff) << 19) | \\"
+	echo "	((NAME ## _INPUT_BUF_EN & 0x3) << 17) | \\"
+	echo "	((NAME ## _WK_PU_EN & 0x1) << 16) | \\"
+	echo "	((NAME ## _PU_SLW_RT & 0x1) << 13) | \\"
+	echo "	((NAME ## _PU_DRV_STRG & 0xf) << 8) | \\"
+	echo "	((NAME ## _PD_SLW_RT & 0x1) << 5) | \\"
+	echo "	(NAME ## _PD_DRV_STRG & 0x1f))"
+
+	cat << EOF
+
+#endif /* __SOCFPGA_ARRIA10_CONFIG_H__ */
+EOF
+	) > "${outfile}"
+}
+
+usage() {
+	echo "$0 [hps_xml] [output_file]"
+	echo "Process QTS-generated hps.xml into devicetree header."
+	echo ""
+	echo "  hps_xml      - hps.xml file from hps_isw_handoff"
+	echo "  output_file  - Output header file for dtsi include"
+	echo ""
+}
+
+hps_xml="$1"
+outfile="$2"
+
+if [ "$#" -ne 2 ] ; then
+	usage
+	exit 1
+fi
+
+process_a10_hps_config "${hps_xml}" "${outfile}"
diff --git a/roms/u-boot/arch/arm/mach-socfpga/qts-filter.sh b/roms/u-boot/arch/arm/mach-socfpga/qts-filter.sh
new file mode 100755
index 000000000..a49cd1b68
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/qts-filter.sh
@@ -0,0 +1,233 @@
+#!/bin/sh
+
+#
+# helper function to convert from DOS to Unix, if necessary, and handle
+# lines ending in '\'.
+#
+fix_newlines_in_macros() {
+	sed -n ':next;s/\r$//;/[^\\]\\$/ {N;s/\\\n//;b next};p' $1
+}
+
+#
+# Process iocsr_config_*.[ch]
+# $1:	SoC type
+# $2:	Input handoff directory
+# $3:	Input BSP Generated directory
+# $4:	Output directory
+#
+process_iocsr_config() {
+	soc="$1"
+	in_qts_dir="$2"
+	in_bsp_dir="$3"
+	out_dir="$4"
+
+	(
+	cat << EOF
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA IOCSR configuration
+ */
+
+#ifndef __SOCFPGA_IOCSR_CONFIG_H__
+#define __SOCFPGA_IOCSR_CONFIG_H__
+
+EOF
+
+	# Retrieve the scan chain lengths
+	fix_newlines_in_macros \
+		${in_bsp_dir}/generated/iocsr_config_${soc}.h |
+	grep 'CONFIG_HPS_IOCSR_SCANCHAIN[0-9]\+_LENGTH'	| tr -d "()"
+
+	echo ""
+
+	# Retrieve the scan chain config and zap the ad-hoc length encoding
+	fix_newlines_in_macros \
+		${in_bsp_dir}/generated/iocsr_config_${soc}.c |
+	sed -n '/^const/ !b; :next {/^const/ s/(.*)//;p;n;b next}'
+
+	cat << EOF
+
+#endif /* __SOCFPGA_IOCSR_CONFIG_H__ */
+EOF
+	) > "${out_dir}/iocsr_config.h"
+}
+
+#
+# Process pinmux_config_*.c (and ignore pinmux_config.h)
+# $1:	SoC type
+# $2:	Input directory
+# $3:	Output directory
+#
+process_pinmux_config() {
+	soc="$1"
+	in_qts_dir="$2"
+	in_bsp_dir="$3"
+	out_dir="$4"
+
+	(
+	cat << EOF
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA PinMux configuration
+ */
+
+#ifndef __SOCFPGA_PINMUX_CONFIG_H__
+#define __SOCFPGA_PINMUX_CONFIG_H__
+
+EOF
+
+	# Retrieve the pinmux config and zap the ad-hoc length encoding
+	fix_newlines_in_macros \
+		${in_bsp_dir}/generated/pinmux_config_${soc}.c |
+	sed -n '/^unsigned/ !b; :next {/^unsigned/ {s/\[.*\]/[]/;s/unsigned long/const u8/};p;n;b next}'
+
+	cat << EOF
+
+#endif /* __SOCFPGA_PINMUX_CONFIG_H__ */
+EOF
+	) > "${out_dir}/pinmux_config.h"
+}
+
+#
+# Process pll_config.h
+# $1:	SoC type (not used)
+# $2:	Input directory
+# $3:	Output directory
+#
+process_pll_config() {
+	soc="$1"
+	in_qts_dir="$2"
+	in_bsp_dir="$3"
+	out_dir="$4"
+
+	(
+	cat << EOF
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA Clock and PLL configuration
+ */
+
+#ifndef __SOCFPGA_PLL_CONFIG_H__
+#define __SOCFPGA_PLL_CONFIG_H__
+
+EOF
+
+	# Retrieve the pll config and zap parenthesis
+	fix_newlines_in_macros \
+		${in_bsp_dir}/generated/pll_config.h |
+	sed -n '/CONFIG_HPS/ !b; :next {/CONFIG_HPS/ s/[()]//g;/endif/ b;p;n;b next}'
+
+	cat << EOF
+
+#endif /* __SOCFPGA_PLL_CONFIG_H__ */
+EOF
+	) > "${out_dir}/pll_config.h"
+}
+
+#
+# Filter out only the macros which are actually used by the code
+#
+grep_sdram_config() {
+	egrep "#define (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE|CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL|CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER|CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN|CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN|CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN|CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT|CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN|CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT|CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT|CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES|CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES|CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ|CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE|CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS|CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS|CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS|CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS|CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH|CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH|CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN|CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK|CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL|CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA|CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH|CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH|CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP|CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP|CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP|CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP|CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR|CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN|CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST|CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE|CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC|CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY|CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0|CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32|CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0|CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14|CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46|CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0|CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0|CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32|CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0|CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4|CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36|CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0|CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32|CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64|RW_MGR_ACTIVATE_0_AND_1|RW_MGR_ACTIVATE_0_AND_1_WAIT1|RW_MGR_ACTIVATE_0_AND_1_WAIT2|RW_MGR_ACTIVATE_1|RW_MGR_CLEAR_DQS_ENABLE|RW_MGR_EMR_OCD_ENABLE|RW_MGR_EMR|RW_MGR_EMR2|RW_MGR_EMR3|RW_MGR_GUARANTEED_READ|RW_MGR_GUARANTEED_READ_CONT|RW_MGR_GUARANTEED_WRITE|RW_MGR_GUARANTEED_WRITE_WAIT0|RW_MGR_GUARANTEED_WRITE_WAIT1|RW_MGR_GUARANTEED_WRITE_WAIT2|RW_MGR_GUARANTEED_WRITE_WAIT3|RW_MGR_IDLE|RW_MGR_IDLE_LOOP1|RW_MGR_IDLE_LOOP2|RW_MGR_INIT_RESET_0_CKE_0|RW_MGR_INIT_RESET_1_CKE_0|RW_MGR_INIT_CKE_0|RW_MGR_LFSR_WR_RD_BANK_0|RW_MGR_LFSR_WR_RD_BANK_0_DATA|RW_MGR_LFSR_WR_RD_BANK_0_DQS|RW_MGR_LFSR_WR_RD_BANK_0_NOP|RW_MGR_LFSR_WR_RD_BANK_0_WAIT|RW_MGR_LFSR_WR_RD_BANK_0_WL_1|RW_MGR_LFSR_WR_RD_DM_BANK_0|RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA|RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS|RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP|RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT|RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1|RW_MGR_MR_CALIB|RW_MGR_MR_USER|RW_MGR_MR_DLL_RESET|RW_MGR_MRS0_DLL_RESET|RW_MGR_MRS0_DLL_RESET_MIRR|RW_MGR_MRS0_USER|RW_MGR_MRS0_USER_MIRR|RW_MGR_MRS1|RW_MGR_MRS1_MIRR|RW_MGR_MRS2|RW_MGR_MRS2_MIRR|RW_MGR_MRS3|RW_MGR_MRS3_MIRR|RW_MGR_NOP|RW_MGR_PRECHARGE_ALL|RW_MGR_READ_B2B|RW_MGR_READ_B2B_WAIT1|RW_MGR_READ_B2B_WAIT2|RW_MGR_REFRESH|RW_MGR_REFRESH_ALL|RW_MGR_RETURN|RW_MGR_SGLE_READ|RW_MGR_ZQCL|RW_MGR_TRUE_MEM_DATA_MASK_WIDTH|RW_MGR_MEM_ADDRESS_MIRRORING|RW_MGR_MEM_DATA_MASK_WIDTH|RW_MGR_MEM_DATA_WIDTH|RW_MGR_MEM_DQ_PER_READ_DQS|RW_MGR_MEM_DQ_PER_WRITE_DQS|RW_MGR_MEM_IF_READ_DQS_WIDTH|RW_MGR_MEM_IF_WRITE_DQS_WIDTH|RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM|RW_MGR_MEM_NUMBER_OF_RANKS|RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS|RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS|IO_DELAY_PER_DCHAIN_TAP|IO_DELAY_PER_DQS_EN_DCHAIN_TAP|IO_DELAY_PER_OPA_TAP|IO_DLL_CHAIN_LENGTH|IO_DQDQS_OUT_PHASE_MAX|IO_DQS_EN_DELAY_MAX|IO_DQS_EN_DELAY_OFFSET|IO_DQS_EN_PHASE_MAX|IO_DQS_IN_DELAY_MAX|IO_DQS_IN_RESERVE|IO_DQS_OUT_RESERVE|IO_IO_IN_DELAY_MAX|IO_IO_OUT1_DELAY_MAX|IO_IO_OUT2_DELAY_MAX|IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS|AFI_RATE_RATIO|AFI_CLK_FREQ|CALIB_LFIFO_OFFSET|CALIB_VFIFO_OFFSET|ENABLE_SUPER_QUICK_CALIBRATION|MAX_LATENCY_COUNT_WIDTH|READ_VALID_FIFO_SIZE|REG_FILE_INIT_SEQ_SIGNATURE|TINIT_CNTR0_VAL|TINIT_CNTR1_VAL|TINIT_CNTR2_VAL|TRESET_CNTR0_VAL|TRESET_CNTR1_VAL|TRESET_CNTR2_VAL|CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR|CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_BC|CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_DIFF_CHIP)[[:space:]]"
+}
+
+#
+# Process sdram_config.h, sequencer_auto*h and sequencer_defines.h
+# $1:	SoC type (not used)
+# $2:	Input directory
+# $3:	Output directory
+#
+process_sdram_config() {
+	soc="$1"
+	in_qts_dir="$2"
+	in_bsp_dir="$3"
+	out_dir="$4"
+
+	(
+	cat << EOF
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Altera SoCFPGA SDRAM configuration
+ *
+ */
+
+#ifndef __SOCFPGA_SDRAM_CONFIG_H__
+#define __SOCFPGA_SDRAM_CONFIG_H__
+
+EOF
+
+	echo "/* SDRAM configuration */"
+	# Retrieve the sdram config, zap broken lines and zap parenthesis
+	fix_newlines_in_macros \
+		${in_bsp_dir}/generated/sdram/sdram_config.h |
+	sed -n "/\\\\$/ {N;s/ \\\\\n/\t/};p" |
+	sed -n '/CONFIG_HPS/ !b; :next {/CONFIG_HPS/ s/[()]//g;/endif/ b;p;n;b next}' |
+		sort -u | grep_sdram_config
+
+	echo ""
+	echo "/* Sequencer auto configuration */"
+	fix_newlines_in_macros \
+		${in_qts_dir}/hps_isw_handoff/*/sequencer_auto.h |
+	sed -n "/__RW_MGR/ {s/__//;s/ \+\([^ ]\+\)$/\t\1/p}" |
+		sort -u | grep_sdram_config
+
+	echo ""
+	echo "/* Sequencer defines configuration */"
+	fix_newlines_in_macros \
+		${in_qts_dir}/hps_isw_handoff/*/sequencer_defines.h |
+	sed -n "/^#define [^_]/ {s/__//;s/ \+\([^ ]\+\)$/\t\1/p}" |
+		sort -u | grep_sdram_config
+
+	echo ""
+	echo "/* Sequencer ac_rom_init configuration */"
+	fix_newlines_in_macros \
+		${in_qts_dir}/hps_isw_handoff/*/sequencer_auto_ac_init.c |
+	sed -n '/^const.*\[/ !b; :next {/^const.*\[/ {N;s/\n//;s/alt_u32/u32/;s/\[.*\]/[]/};/endif/ b;p;n;b next}'
+
+	echo ""
+	echo "/* Sequencer inst_rom_init configuration */"
+	fix_newlines_in_macros \
+		${in_qts_dir}/hps_isw_handoff/*/sequencer_auto_inst_init.c |
+	sed -n '/^const.*\[/ !b; :next {/^const.*\[/ {N;s/\n//;s/alt_u32/u32/;s/\[.*\]/[]/};/endif/ b;p;n;b next}'
+
+	cat << EOF
+
+#endif /* __SOCFPGA_SDRAM_CONFIG_H__ */
+EOF
+	) > "${out_dir}/sdram_config.h"
+}
+
+usage() {
+	echo "$0 [soc_type] [input_qts_dir] [input_bsp_dir] [output_dir]"
+	echo "Process QTS-generated headers into U-Boot compatible ones."
+	echo ""
+	echo "  soc_type      - Type of SoC, either 'cyclone5' or 'arria5'."
+	echo "  input_qts_dir - Directory with compiled Quartus project"
+	echo "                  and containing the Quartus project file (QPF)."
+	echo "  input_bsp_dir - Directory with generated bsp containing"
+	echo "                  the settings.bsp file."
+	echo "  output_dir    - Directory to store the U-Boot compatible"
+	echo "                  headers."
+	echo ""
+}
+
+soc="$1"
+in_qts_dir="$2"
+in_bsp_dir="$3"
+out_dir="$4"
+
+if [ "$#" -ne 4 ] ; then
+	usage
+	exit 1
+fi
+
+if [ ! -d "${in_qts_dir}" -o ! -d "${in_bsp_dir}" -o \
+	! -d "${out_dir}" -o -z "${soc}" ] ; then
+	usage
+	exit 3
+fi
+
+process_iocsr_config  "${soc}" "${in_qts_dir}" "${in_bsp_dir}" "${out_dir}"
+process_pinmux_config "${soc}" "${in_qts_dir}" "${in_bsp_dir}" "${out_dir}"
+process_pll_config    "${soc}" "${in_qts_dir}" "${in_bsp_dir}" "${out_dir}"
+process_sdram_config  "${soc}" "${in_qts_dir}" "${in_bsp_dir}" "${out_dir}"
diff --git a/roms/u-boot/arch/arm/mach-socfpga/reset_manager_arria10.c b/roms/u-boot/arch/arm/mach-socfpga/reset_manager_arria10.c
new file mode 100644
index 000000000..27c030801
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/reset_manager_arria10.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ */
+
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <wait_bit.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct bridge_cfg {
+	int compat_id;
+	u32  mask_noc;
+	u32  mask_rstmgr;
+};
+
+static const struct bridge_cfg bridge_cfg_tbl[] = {
+	{
+		COMPAT_ALTERA_SOCFPGA_H2F_BRG,
+		ALT_SYSMGR_NOC_H2F_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_H2F_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_LWH2F_BRG,
+		ALT_SYSMGR_NOC_LWH2F_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_F2H_BRG,
+		ALT_SYSMGR_NOC_F2H_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_F2H_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_F2SDR0,
+		ALT_SYSMGR_NOC_F2SDR0_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_F2SDR1,
+		ALT_SYSMGR_NOC_F2SDR1_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_F2SDR2,
+		ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK,
+	},
+};
+
+/* Disable the watchdog (toggle reset to watchdog) */
+void socfpga_watchdog_disable(void)
+{
+	/* assert reset for watchdog */
+	setbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_A10_PER1MODRST,
+		     ALT_RSTMGR_PER1MODRST_WD0_SET_MSK);
+}
+
+/* Release NOC ddr scheduler from reset */
+void socfpga_reset_deassert_noc_ddr_scheduler(void)
+{
+	clrbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_A10_BRGMODRST,
+		     ALT_RSTMGR_BRGMODRST_DDRSCH_SET_MSK);
+}
+
+static int get_bridge_init_val(const void *blob, int compat_id)
+{
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0, compat_id);
+	if (node < 0)
+		return 0;
+
+	return fdtdec_get_uint(blob, node, "init-val", 0);
+}
+
+/* Enable bridges (hps2fpga, lwhps2fpga, fpga2hps, fpga2sdram) per handoff */
+int socfpga_reset_deassert_bridges_handoff(void)
+{
+	u32 mask_noc = 0, mask_rstmgr = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bridge_cfg_tbl); i++) {
+		if (get_bridge_init_val(gd->fdt_blob,
+					bridge_cfg_tbl[i].compat_id)) {
+			mask_noc |= bridge_cfg_tbl[i].mask_noc;
+			mask_rstmgr |= bridge_cfg_tbl[i].mask_rstmgr;
+		}
+	}
+
+	/* clear idle request to all bridges */
+	setbits_le32(socfpga_get_sysmgr_addr() + SYSMGR_A10_NOC_IDLEREQ_CLR,
+		     mask_noc);
+
+	/* Release bridges from reset state per handoff value */
+	clrbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_A10_BRGMODRST,
+		     mask_rstmgr);
+
+	/* Poll until all idleack to 0, timeout at 1000ms */
+	return wait_for_bit_le32((const void *)(socfpga_get_sysmgr_addr() +
+				 SYSMGR_A10_NOC_IDLEACK),
+				 mask_noc, false, 1000, false);
+}
+
+/* Release L4 OSC1 Watchdog Timer 0 from reset through reset manager */
+void socfpga_reset_deassert_osc1wd0(void)
+{
+	clrbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_A10_PER1MODRST,
+		     ALT_RSTMGR_PER1MODRST_WD0_SET_MSK);
+}
+
+/*
+ * Assert or de-assert SoCFPGA reset manager reset.
+ */
+void socfpga_per_reset(u32 reset, int set)
+{
+	unsigned long reg;
+	u32 rstmgr_bank = RSTMGR_BANK(reset);
+
+	switch (rstmgr_bank) {
+	case 0:
+		reg = RSTMGR_A10_MPUMODRST;
+		break;
+	case 1:
+		reg = RSTMGR_A10_PER0MODRST;
+		break;
+	case 2:
+		reg = RSTMGR_A10_PER1MODRST;
+		break;
+	case 3:
+		reg = RSTMGR_A10_BRGMODRST;
+		break;
+	case 4:
+		reg = RSTMGR_A10_SYSMODRST;
+		break;
+
+	default:
+		return;
+	}
+
+	if (set)
+		setbits_le32(socfpga_get_rstmgr_addr() + reg,
+			     1 << RSTMGR_RESET(reset));
+	else
+		clrbits_le32(socfpga_get_rstmgr_addr() + reg,
+			     1 << RSTMGR_RESET(reset));
+}
+
+/*
+ * Assert reset on every peripheral but L4WD0.
+ * Watchdog must be kept intact to prevent glitches
+ * and/or hangs.
+ * For the Arria10, we disable all the peripherals except L4 watchdog0,
+ * L4 Timer 0, and ECC.
+ */
+void socfpga_per_reset_all(void)
+{
+	const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
+			  (1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
+	unsigned mask_ecc_ocp =
+		ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_USBECC0_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_USBECC1_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK;
+
+	/* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
+	writel(~l4wd0, socfpga_get_rstmgr_addr() + RSTMGR_A10_PER1MODRST);
+	setbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_A10_PER0MODRST,
+		     ~mask_ecc_ocp);
+
+	/* Finally disable the ECC_OCP */
+	setbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_A10_PER0MODRST,
+		     mask_ecc_ocp);
+}
+
+int socfpga_bridges_reset(void)
+{
+	int ret;
+
+	/* Disable all the bridges (hps2fpga, lwhps2fpga, fpga2hps,
+	   fpga2sdram) */
+	/* set idle request to all bridges */
+	writel(ALT_SYSMGR_NOC_H2F_SET_MSK |
+		ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+		ALT_SYSMGR_NOC_F2H_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+		socfpga_get_sysmgr_addr() + SYSMGR_A10_NOC_IDLEREQ_SET);
+
+	/* Enable the NOC timeout */
+	writel(ALT_SYSMGR_NOC_TMO_EN_SET_MSK,
+	       socfpga_get_sysmgr_addr() + SYSMGR_A10_NOC_TIMEOUT);
+
+	/* Poll until all idleack to 1 */
+	ret = wait_for_bit_le32((const void *)(socfpga_get_sysmgr_addr() +
+				SYSMGR_A10_NOC_IDLEACK),
+				ALT_SYSMGR_NOC_H2F_SET_MSK |
+				ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+				ALT_SYSMGR_NOC_F2H_SET_MSK |
+				ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+				ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+				ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+				true, 10000, false);
+	if (ret)
+		return ret;
+
+	/* Poll until all idlestatus to 1 */
+	ret = wait_for_bit_le32((const void *)(socfpga_get_sysmgr_addr() +
+				SYSMGR_A10_NOC_IDLESTATUS),
+				ALT_SYSMGR_NOC_H2F_SET_MSK |
+				ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+				ALT_SYSMGR_NOC_F2H_SET_MSK |
+				ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+				ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+				ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+				true, 10000, false);
+	if (ret)
+		return ret;
+
+	/* Put all bridges (except NOR DDR scheduler) into reset state */
+	setbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_A10_BRGMODRST,
+		     (ALT_RSTMGR_BRGMODRST_H2F_SET_MSK |
+		      ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK |
+		      ALT_RSTMGR_BRGMODRST_F2H_SET_MSK |
+		      ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK |
+		      ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK |
+		      ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK));
+
+	/* Disable NOC timeout */
+	writel(0, socfpga_get_sysmgr_addr() + SYSMGR_A10_NOC_TIMEOUT);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/reset_manager_gen5.c b/roms/u-boot/arch/arm/mach-socfpga/reset_manager_gen5.c
new file mode 100644
index 000000000..a65860ef0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/reset_manager_gen5.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <linux/bitops.h>
+
+/* Assert or de-assert SoCFPGA reset manager reset. */
+void socfpga_per_reset(u32 reset, int set)
+{
+	unsigned long reg;
+	u32 rstmgr_bank = RSTMGR_BANK(reset);
+
+	switch (rstmgr_bank) {
+	case 0:
+		reg = RSTMGR_GEN5_MPUMODRST;
+		break;
+	case 1:
+		reg = RSTMGR_GEN5_PERMODRST;
+		break;
+	case 2:
+		reg = RSTMGR_GEN5_PER2MODRST;
+		break;
+	case 3:
+		reg = RSTMGR_GEN5_BRGMODRST;
+		break;
+	case 4:
+		reg = RSTMGR_GEN5_MISCMODRST;
+		break;
+
+	default:
+		return;
+	}
+
+	if (set)
+		setbits_le32(socfpga_get_rstmgr_addr() + reg,
+			     1 << RSTMGR_RESET(reset));
+	else
+		clrbits_le32(socfpga_get_rstmgr_addr() + reg,
+			     1 << RSTMGR_RESET(reset));
+}
+
+/*
+ * Assert reset on every peripheral but L4WD0.
+ * Watchdog must be kept intact to prevent glitches
+ * and/or hangs.
+ */
+void socfpga_per_reset_all(void)
+{
+	const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
+
+	writel(~l4wd0, socfpga_get_rstmgr_addr() + RSTMGR_GEN5_PERMODRST);
+	writel(0xffffffff, socfpga_get_rstmgr_addr() + RSTMGR_GEN5_PER2MODRST);
+}
+
+#define L3REGS_REMAP_LWHPS2FPGA_MASK	0x10
+#define L3REGS_REMAP_HPS2FPGA_MASK	0x08
+#define L3REGS_REMAP_OCRAM_MASK		0x01
+
+void socfpga_bridges_set_handoff_regs(bool h2f, bool lwh2f, bool f2h)
+{
+	u32 brgmask = 0x0;
+	u32 l3rmask = L3REGS_REMAP_OCRAM_MASK;
+
+	if (h2f)
+		brgmask |= BIT(0);
+	else
+		l3rmask |= L3REGS_REMAP_HPS2FPGA_MASK;
+
+	if (lwh2f)
+		brgmask |= BIT(1);
+	else
+		l3rmask |= L3REGS_REMAP_LWHPS2FPGA_MASK;
+
+	if (f2h)
+		brgmask |= BIT(2);
+
+	writel(brgmask,
+	       socfpga_get_sysmgr_addr() + SYSMGR_ISWGRP_HANDOFF_OFFSET(0));
+	writel(l3rmask,
+	       socfpga_get_sysmgr_addr() + SYSMGR_ISWGRP_HANDOFF_OFFSET(1));
+}
+
+void socfpga_bridges_reset(int enable)
+{
+	const u32 l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
+				L3REGS_REMAP_HPS2FPGA_MASK |
+				L3REGS_REMAP_OCRAM_MASK;
+
+	if (enable) {
+		/* brdmodrst */
+		writel(0x7, socfpga_get_rstmgr_addr() + RSTMGR_GEN5_BRGMODRST);
+		writel(L3REGS_REMAP_OCRAM_MASK, SOCFPGA_L3REGS_ADDRESS);
+	} else {
+		socfpga_bridges_set_handoff_regs(false, false, false);
+
+		/* Check signal from FPGA. */
+		if (!fpgamgr_test_fpga_ready()) {
+			/* FPGA not ready, do nothing. We allow system to boot
+			 * without FPGA ready. So, return 0 instead of error. */
+			printf("%s: FPGA not ready, aborting.\n", __func__);
+			return;
+		}
+
+		/* brdmodrst */
+		writel(0, socfpga_get_rstmgr_addr() + RSTMGR_GEN5_BRGMODRST);
+
+		/* Remap the bridges into memory map */
+		writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
+	}
+	return;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/reset_manager_s10.c b/roms/u-boot/arch/arm/mach-socfpga/reset_manager_s10.c
new file mode 100644
index 000000000..d2337bd4d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/reset_manager_s10.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/smc_api.h>
+#include <asm/arch/system_manager.h>
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <linux/iopoll.h>
+#include <linux/intel-smc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Assert or de-assert SoCFPGA reset manager reset. */
+void socfpga_per_reset(u32 reset, int set)
+{
+	unsigned long reg;
+
+	if (RSTMGR_BANK(reset) == 0)
+		reg = RSTMGR_SOC64_MPUMODRST;
+	else if (RSTMGR_BANK(reset) == 1)
+		reg = RSTMGR_SOC64_PER0MODRST;
+	else if (RSTMGR_BANK(reset) == 2)
+		reg = RSTMGR_SOC64_PER1MODRST;
+	else if (RSTMGR_BANK(reset) == 3)
+		reg = RSTMGR_SOC64_BRGMODRST;
+	else	/* Invalid reset register, do nothing */
+		return;
+
+	if (set)
+		setbits_le32(socfpga_get_rstmgr_addr() + reg,
+			     1 << RSTMGR_RESET(reset));
+	else
+		clrbits_le32(socfpga_get_rstmgr_addr() + reg,
+			     1 << RSTMGR_RESET(reset));
+}
+
+/*
+ * Assert reset on every peripheral but L4WD0.
+ * Watchdog must be kept intact to prevent glitches
+ * and/or hangs.
+ */
+void socfpga_per_reset_all(void)
+{
+	const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
+
+	/* disable all except OCP and l4wd0. OCP disable later */
+	writel(~(l4wd0 | RSTMGR_PER0MODRST_OCP_MASK),
+		      socfpga_get_rstmgr_addr() + RSTMGR_SOC64_PER0MODRST);
+	writel(~l4wd0, socfpga_get_rstmgr_addr() + RSTMGR_SOC64_PER0MODRST);
+	writel(0xffffffff, socfpga_get_rstmgr_addr() + RSTMGR_SOC64_PER1MODRST);
+}
+
+void socfpga_bridges_reset(int enable)
+{
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF)
+	u64 arg = enable;
+
+	int ret = invoke_smc(INTEL_SIP_SMC_HPS_SET_BRIDGES, &arg, 1, NULL, 0);
+	if (ret) {
+		printf("SMC call failed with error %d in %s.\n", ret, __func__);
+		return;
+	}
+#else
+	u32 reg;
+
+	if (enable) {
+		/* clear idle request to all bridges */
+		setbits_le32(socfpga_get_sysmgr_addr() +
+			     SYSMGR_SOC64_NOC_IDLEREQ_CLR, ~0);
+
+		/* Release all bridges from reset state */
+		clrbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_SOC64_BRGMODRST,
+			     ~0);
+
+		/* Poll until all idleack to 0 */
+		read_poll_timeout(readl, socfpga_get_sysmgr_addr() +
+				  SYSMGR_SOC64_NOC_IDLEACK, reg, !reg, 1000,
+				  300000);
+	} else {
+		/* set idle request to all bridges */
+		writel(~0,
+		       socfpga_get_sysmgr_addr() +
+		       SYSMGR_SOC64_NOC_IDLEREQ_SET);
+
+		/* Enable the NOC timeout */
+		writel(1, socfpga_get_sysmgr_addr() + SYSMGR_SOC64_NOC_TIMEOUT);
+
+		/* Poll until all idleack to 1 */
+		read_poll_timeout(readl, socfpga_get_sysmgr_addr() +
+				  SYSMGR_SOC64_NOC_IDLEACK, reg,
+				  reg == (SYSMGR_NOC_H2F_MSK |
+					  SYSMGR_NOC_LWH2F_MSK),
+				  1000, 300000);
+
+		/* Poll until all idlestatus to 1 */
+		read_poll_timeout(readl, socfpga_get_sysmgr_addr() +
+				  SYSMGR_SOC64_NOC_IDLESTATUS, reg,
+				  reg == (SYSMGR_NOC_H2F_MSK |
+					  SYSMGR_NOC_LWH2F_MSK),
+				  1000, 300000);
+
+		/* Reset all bridges (except NOR DDR scheduler & F2S) */
+		setbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_SOC64_BRGMODRST,
+			     ~(RSTMGR_BRGMODRST_DDRSCH_MASK |
+			       RSTMGR_BRGMODRST_FPGA2SOC_MASK));
+
+		/* Disable NOC timeout */
+		writel(0, socfpga_get_sysmgr_addr() + SYSMGR_SOC64_NOC_TIMEOUT);
+	}
+#endif
+}
+
+/*
+ * Return non-zero if the CPU has been warm reset
+ */
+int cpu_has_been_warmreset(void)
+{
+	return readl(socfpga_get_rstmgr_addr() + RSTMGR_SOC64_STATUS) &
+			RSTMGR_L4WD_MPU_WARMRESET_MASK;
+}
+
+void print_reset_info(void)
+{
+	bool iswd;
+	int n;
+	u32 stat = cpu_has_been_warmreset();
+
+	printf("Reset state: %s%s", stat ? "Warm " : "Cold",
+	       (stat & RSTMGR_STAT_SDMWARMRST) ? "[from SDM] " : "");
+
+	stat &= ~RSTMGR_STAT_SDMWARMRST;
+	if (!stat) {
+		puts("\n");
+		return;
+	}
+
+	n = generic_ffs(stat) - 1;
+	iswd = (n >= RSTMGR_STAT_L4WD0RST_BITPOS);
+	printf("(Triggered by %s %d)\n", iswd ? "Watchdog" : "MPU",
+	       iswd ? (n - RSTMGR_STAT_L4WD0RST_BITPOS) :
+	       (n - RSTMGR_STAT_MPU0RST_BITPOS));
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/scan_manager.c b/roms/u-boot/arch/arm/mach-socfpga/scan_manager.c
new file mode 100644
index 000000000..36d688014
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/scan_manager.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/scan_manager.h>
+#include <asm/arch/system_manager.h>
+#include <linux/delay.h>
+
+/*
+ * Maximum polling loop to wait for IO scan chain engine becomes idle
+ * to prevent infinite loop. It is important that this is NOT changed
+ * to delay using timer functions, since at the time this function is
+ * called, timer might not yet be inited.
+ */
+#define SCANMGR_MAX_DELAY		100
+
+/*
+ * Maximum length of TDI_TDO packet payload is 128 bits,
+ * represented by (length - 1) in TDI_TDO header.
+ */
+#define TDI_TDO_MAX_PAYLOAD		127
+
+#define SCANMGR_STAT_ACTIVE		(1 << 31)
+#define SCANMGR_STAT_WFIFOCNT_MASK	0x70000000
+
+static const struct socfpga_scan_manager *scan_manager_base =
+		(void *)(SOCFPGA_SCANMGR_ADDRESS);
+static const struct socfpga_freeze_controller *freeze_controller_base =
+		(void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
+
+/**
+ * scan_chain_engine_is_idle() - Check if the JTAG scan chain is idle
+ * @max_iter:	Maximum number of iterations to wait for idle
+ *
+ * Function to check IO scan chain engine status and wait if the engine is
+ * is active. Poll the IO scan chain engine till maximum iteration reached.
+ */
+static u32 scan_chain_engine_is_idle(u32 max_iter)
+{
+	const u32 mask = SCANMGR_STAT_ACTIVE | SCANMGR_STAT_WFIFOCNT_MASK;
+	u32 status;
+
+	/* Poll the engine until the scan engine is inactive. */
+	do {
+		status = readl(&scan_manager_base->stat);
+		if (!(status & mask))
+			return 0;
+	} while (max_iter--);
+
+	return -ETIMEDOUT;
+}
+
+#define JTAG_BP_INSN		(1 << 0)
+#define JTAG_BP_TMS		(1 << 1)
+#define JTAG_BP_PAYLOAD		(1 << 2)
+#define JTAG_BP_2BYTE		(1 << 3)
+#define JTAG_BP_4BYTE		(1 << 4)
+
+/**
+ * scan_mgr_jtag_io() - Access the JTAG chain
+ * @flags:	Control flags, used to configure the action on the JTAG
+ * @iarg:	Instruction argument
+ * @parg:	Payload argument or data
+ *
+ * Perform I/O on the JTAG chain
+ */
+static void scan_mgr_jtag_io(const u32 flags, const u8 iarg, const u32 parg)
+{
+	u32 data = parg;
+
+	if (flags & JTAG_BP_INSN) {	/* JTAG instruction */
+		/*
+		 * The SCC JTAG register is LSB first, so make
+		 * space for the instruction at the LSB.
+		 */
+		data <<= 8;
+		if (flags & JTAG_BP_TMS) {
+			data |= (0 << 7);	/* TMS instruction. */
+			data |= iarg & 0x3f;	/* TMS arg is 6 bits. */
+			if (flags & JTAG_BP_PAYLOAD)
+				data |= (1 << 6);
+		} else {
+			data |= (1 << 7);	/* TDI/TDO instruction. */
+			data |= iarg & 0xf;	/* TDI/TDO arg is 4 bits. */
+			if (flags & JTAG_BP_PAYLOAD)
+				data |= (1 << 4);
+		}
+	}
+
+	if (flags & JTAG_BP_4BYTE)
+		writel(data, &scan_manager_base->fifo_quad_byte);
+	else if (flags & JTAG_BP_2BYTE)
+		writel(data & 0xffff, &scan_manager_base->fifo_double_byte);
+	else
+		writel(data & 0xff, &scan_manager_base->fifo_single_byte);
+}
+
+/**
+ * scan_mgr_jtag_insn_data() - Send JTAG instruction and data
+ * @iarg:	Instruction argument
+ * @data:	Associated data
+ * @dlen:	Length of data in bits
+ *
+ * This function is used when programming the IO chains to submit the
+ * instruction followed by variable length payload.
+ */
+static int
+scan_mgr_jtag_insn_data(const u8 iarg, const unsigned long *data,
+			const unsigned int dlen)
+{
+	int i, j;
+
+	scan_mgr_jtag_io(JTAG_BP_INSN | JTAG_BP_2BYTE, iarg, dlen - 1);
+
+	/* 32 bits or more remain */
+	for (i = 0; i < dlen / 32; i++)
+		scan_mgr_jtag_io(JTAG_BP_4BYTE, 0x0, data[i]);
+
+	if ((dlen % 32) > 24) {	/* 31...24 bits remain */
+		scan_mgr_jtag_io(JTAG_BP_4BYTE, 0x0, data[i]);
+	} else if (dlen % 32) {	/* 24...1 bit remain */
+		for (j = 0; j < dlen % 32; j += 8)
+			scan_mgr_jtag_io(0, 0x0, data[i] >> j);
+	}
+
+	return scan_chain_engine_is_idle(SCANMGR_MAX_DELAY);
+}
+
+/**
+ * scan_mgr_io_scan_chain_prg() - Program HPS IO Scan Chain
+ * @io_scan_chain_id:		IO scan chain ID
+ */
+static int scan_mgr_io_scan_chain_prg(const unsigned int io_scan_chain_id)
+{
+	u32 io_scan_chain_len_in_bits;
+	const unsigned long *iocsr_scan_chain;
+	unsigned int rem, idx = 0;
+	int ret;
+
+	ret = iocsr_get_config_table(io_scan_chain_id, &iocsr_scan_chain,
+				     &io_scan_chain_len_in_bits);
+	if (ret)
+		return 1;
+
+	/*
+	 * De-assert reinit if the IO scan chain is intended for HIO. In
+	 * this, its the chain 3.
+	 */
+	if (io_scan_chain_id == 3)
+		clrbits_le32(&freeze_controller_base->hioctrl,
+			     SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
+
+	/*
+	 * Check if the scan chain engine is inactive and the
+	 * WFIFO is empty before enabling the IO scan chain
+	 */
+	ret = scan_chain_engine_is_idle(SCANMGR_MAX_DELAY);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable IO Scan chain based on scan chain id
+	 * Note: only one chain can be enabled at a time
+	 */
+	setbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+
+	/* Program IO scan chain. */
+	while (io_scan_chain_len_in_bits) {
+		if (io_scan_chain_len_in_bits > 128)
+			rem = 128;
+		else
+			rem = io_scan_chain_len_in_bits;
+
+		ret = scan_mgr_jtag_insn_data(0x0, &iocsr_scan_chain[idx], rem);
+		if (ret)
+			goto error;
+		io_scan_chain_len_in_bits -= rem;
+		idx += 4;
+	}
+
+	/* Disable IO Scan chain when configuration done*/
+	clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+	return 0;
+
+error:
+	/* Disable IO Scan chain when error detected */
+	clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+	return ret;
+}
+
+int scan_mgr_configure_iocsr(void)
+{
+	int status = 0;
+
+	/* configure the IOCSR through scan chain */
+	status |= scan_mgr_io_scan_chain_prg(0);
+	status |= scan_mgr_io_scan_chain_prg(1);
+	status |= scan_mgr_io_scan_chain_prg(2);
+	status |= scan_mgr_io_scan_chain_prg(3);
+	return status;
+}
+
+/**
+ * scan_mgr_get_fpga_id() - Obtain FPGA JTAG ID
+ *
+ * This function obtains JTAG ID from the FPGA TAP controller.
+ */
+u32 scan_mgr_get_fpga_id(void)
+{
+	const unsigned long data = 0;
+	u32 id = 0xffffffff;
+	int ret;
+
+	/* Enable HPS to talk to JTAG in the FPGA through the System Manager */
+	writel(0x1, socfpga_get_sysmgr_addr() + SYSMGR_GEN5_SCANMGRGRP_CTRL);
+
+	/* Enable port 7 */
+	writel(0x80, &scan_manager_base->en);
+	/* write to CSW to make s2f_ntrst reset */
+	writel(0x02, &scan_manager_base->stat);
+
+	/* Add a pause */
+	mdelay(1);
+
+	/* write 0x00 to CSW to clear the s2f_ntrst */
+	writel(0, &scan_manager_base->stat);
+
+	/*
+	 * Go to Test-Logic-Reset state.
+	 * This sets TAP controller into IDCODE mode.
+	 */
+	scan_mgr_jtag_io(JTAG_BP_INSN | JTAG_BP_TMS, 0x1f | (1 << 5), 0x0);
+
+	/* Go to Run-Test/Idle -> DR-Scan -> Capture-DR -> Shift-DR state. */
+	scan_mgr_jtag_io(JTAG_BP_INSN | JTAG_BP_TMS, 0x02 | (1 << 4), 0x0);
+
+	/*
+	 * Push 4 bytes of data through TDI->DR->TDO.
+	 *
+	 * Length of TDI data is 32bits (length - 1) and they are only
+	 * zeroes as we care only for TDO data.
+	 */
+	ret = scan_mgr_jtag_insn_data(0x4, &data, 32);
+	/* Read 32 bit from captured JTAG data. */
+	if (!ret)
+		id = readl(&scan_manager_base->fifo_quad_byte);
+
+	/* Disable all port */
+	writel(0, &scan_manager_base->en);
+	writel(0, socfpga_get_sysmgr_addr() + SYSMGR_GEN5_SCANMGRGRP_CTRL);
+
+	return id;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/secure_reg_helper.c b/roms/u-boot/arch/arm/mach-socfpga/secure_reg_helper.c
new file mode 100644
index 000000000..0d4f45f33
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/secure_reg_helper.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/secure_reg_helper.h>
+#include <asm/arch/smc_api.h>
+#include <asm/arch/system_manager.h>
+#include <linux/errno.h>
+#include <linux/intel-smc.h>
+
+int socfpga_secure_convert_reg_id_to_addr(u32 id, phys_addr_t *reg_addr)
+{
+	switch (id) {
+	case SOCFPGA_SECURE_REG_SYSMGR_SOC64_SDMMC:
+		*reg_addr = socfpga_get_sysmgr_addr() + SYSMGR_SOC64_SDMMC;
+		break;
+	case SOCFPGA_SECURE_REG_SYSMGR_SOC64_EMAC0:
+		*reg_addr = socfpga_get_sysmgr_addr() + SYSMGR_SOC64_EMAC0;
+		break;
+	case SOCFPGA_SECURE_REG_SYSMGR_SOC64_EMAC1:
+		*reg_addr = socfpga_get_sysmgr_addr() + SYSMGR_SOC64_EMAC1;
+		break;
+	case SOCFPGA_SECURE_REG_SYSMGR_SOC64_EMAC2:
+		*reg_addr = socfpga_get_sysmgr_addr() + SYSMGR_SOC64_EMAC2;
+		break;
+	default:
+		return -EADDRNOTAVAIL;
+	}
+	return 0;
+}
+
+int socfpga_secure_reg_read32(u32 id, u32 *val)
+{
+	int ret;
+	u64 ret_arg;
+	u64 args[1];
+
+	phys_addr_t reg_addr;
+	ret = socfpga_secure_convert_reg_id_to_addr(id, &reg_addr);
+	if (ret)
+		return ret;
+
+	args[0] = (u64)reg_addr;
+	ret = invoke_smc(INTEL_SIP_SMC_REG_READ, args, 1, &ret_arg, 1);
+	if (ret)
+		return ret;
+
+	*val = (u32)ret_arg;
+
+	return 0;
+}
+
+int socfpga_secure_reg_write32(u32 id, u32 val)
+{
+	int ret;
+	u64 args[2];
+
+	phys_addr_t reg_addr;
+	ret = socfpga_secure_convert_reg_id_to_addr(id, &reg_addr);
+	if (ret)
+		return ret;
+
+	args[0] = (u64)reg_addr;
+	args[1] = val;
+	return invoke_smc(INTEL_SIP_SMC_REG_WRITE, args, 2, NULL, 0);
+}
+
+int socfpga_secure_reg_update32(u32 id, u32 mask, u32 val)
+{
+	int ret;
+	u64 args[3];
+
+	phys_addr_t reg_addr;
+	ret = socfpga_secure_convert_reg_id_to_addr(id, &reg_addr);
+	if (ret)
+		return ret;
+
+	args[0] = (u64)reg_addr;
+	args[1] = mask;
+	args[2] = val;
+	return invoke_smc(INTEL_SIP_SMC_REG_UPDATE, args, 3, NULL, 0);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/secure_vab.c b/roms/u-boot/arch/arm/mach-socfpga/secure_vab.c
new file mode 100644
index 000000000..e2db58850
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/secure_vab.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/secure_vab.h>
+#include <asm/arch/smc_api.h>
+#include <asm/unaligned.h>
+#include <common.h>
+#include <exports.h>
+#include <linux/errno.h>
+#include <linux/intel-smc.h>
+#include <log.h>
+
+#define CHUNKSZ_PER_WD_RESET		(256 * SZ_1K)
+
+/*
+ * Read the length of the VAB certificate from the end of image
+ * and calculate the actual image size (excluding the VAB certificate).
+ */
+static size_t get_img_size(u8 *img_buf, size_t img_buf_sz)
+{
+	u8 *img_buf_end = img_buf + img_buf_sz;
+	u32 cert_sz = get_unaligned_le32(img_buf_end - sizeof(u32));
+	u8 *p = img_buf_end - cert_sz - sizeof(u32);
+
+	/* Ensure p is pointing within the img_buf */
+	if (p < img_buf || p > (img_buf_end - VAB_CERT_HEADER_SIZE))
+		return 0;
+
+	if (get_unaligned_le32(p) == SDM_CERT_MAGIC_NUM)
+		return (size_t)(p - img_buf);
+
+	return 0;
+}
+
+/*
+ * Vendor Authorized Boot (VAB) is a security feature for authenticating
+ * the images such as U-Boot, ARM trusted Firmware, Linux kernel,
+ * device tree blob and etc loaded from FIT. User can also trigger
+ * the VAB authentication from U-Boot command.
+ *
+ * This function extracts the VAB certificate and signature block
+ * appended at the end of the image, then send to Secure Device Manager
+ * (SDM) for authentication. This function will validate the SHA384
+ * of the image against the SHA384 hash stored in the VAB certificate
+ * before sending the VAB certificate to SDM for authentication.
+ *
+ * RETURN
+ * 0 if authentication success or
+ *   if authentication is not required and bypassed on a non-secure device
+ * negative error code if authentication fail
+ */
+int socfpga_vendor_authentication(void **p_image, size_t *p_size)
+{
+	int retry_count = 20;
+	u8 hash384[SHA384_SUM_LEN];
+	u64 img_addr, mbox_data_addr;
+	size_t img_sz, mbox_data_sz;
+	u8 *cert_hash_ptr, *mbox_relocate_data_addr;
+	u32 resp = 0, resp_len = 1;
+	int ret;
+
+	img_addr = (uintptr_t)*p_image;
+
+	debug("Authenticating image at address 0x%016llx (%ld bytes)\n",
+	      img_addr, *p_size);
+
+	img_sz = get_img_size((u8 *)img_addr, *p_size);
+	debug("img_sz = %ld\n", img_sz);
+
+	if (!img_sz) {
+		puts("VAB certificate not found in image!\n");
+		return -ENOKEY;
+	}
+
+	if (!IS_ALIGNED(img_sz, sizeof(u32))) {
+		printf("Image size (%ld bytes) not aliged to 4 bytes!\n",
+		       img_sz);
+		return -EBFONT;
+	}
+
+	/* Generate HASH384 from the image */
+	sha384_csum_wd((u8 *)img_addr, img_sz, hash384, CHUNKSZ_PER_WD_RESET);
+
+	cert_hash_ptr = (u8 *)(img_addr + img_sz + VAB_CERT_MAGIC_OFFSET +
+			       VAB_CERT_FIT_SHA384_OFFSET);
+
+	/*
+	 * Compare the SHA384 found in certificate against the SHA384
+	 * calculated from image
+	 */
+	if (memcmp(hash384, cert_hash_ptr, SHA384_SUM_LEN)) {
+		puts("SHA384 not match!\n");
+		return -EKEYREJECTED;
+	}
+
+	mbox_data_addr = img_addr + img_sz - sizeof(u32);
+	/* Size in word (32bits) */
+	mbox_data_sz = (ALIGN(*p_size - img_sz, sizeof(u32))) >> 2;
+
+	debug("mbox_data_addr = 0x%016llx\n", mbox_data_addr);
+	debug("mbox_data_sz = %ld words\n", mbox_data_sz);
+
+	/*
+	 * Relocate certificate to first memory block before trigger SMC call
+	 * to send mailbox command because ATF only able to access first
+	 * memory block.
+	 */
+	mbox_relocate_data_addr = (u8 *)malloc(mbox_data_sz * sizeof(u32));
+	if (!mbox_relocate_data_addr) {
+		puts("Out of memory for VAB certificate relocation!\n");
+		return -ENOMEM;
+	}
+
+	memcpy(mbox_relocate_data_addr, (u8 *)mbox_data_addr, mbox_data_sz * sizeof(u32));
+	*(u32 *)mbox_relocate_data_addr = 0;
+
+	debug("mbox_relocate_data_addr = 0x%p\n", mbox_relocate_data_addr);
+
+	do {
+		if (!IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF)) {
+			/* Invoke SMC call to ATF to send the VAB certificate to SDM */
+			ret  = smc_send_mailbox(MBOX_VAB_SRC_CERT, mbox_data_sz,
+						(u32 *)mbox_relocate_data_addr, 0, &resp_len,
+						&resp);
+		} else {
+			/* Send the VAB certficate to SDM for authentication */
+			ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_VAB_SRC_CERT,
+					    MBOX_CMD_DIRECT, mbox_data_sz,
+					    (u32 *)mbox_relocate_data_addr, 0, &resp_len,
+					    &resp);
+		}
+		/* If SDM is not available, just delay 50ms and retry again */
+		if (ret == MBOX_RESP_DEVICE_BUSY)
+			mdelay(50);
+		else
+			break;
+	} while (--retry_count);
+
+	/* Free the relocate certificate memory space */
+	free(mbox_relocate_data_addr);
+
+	/* Exclude the size of the VAB certificate from image size */
+	*p_size = img_sz;
+
+	debug("ret = 0x%08x, resp = 0x%08x, resp_len = %d\n", ret, resp,
+	      resp_len);
+
+	if (ret) {
+		/*
+		 * Unsupported mailbox command or device not in the
+		 * owned/secure state
+		 */
+		if (ret == MBOX_RESP_NOT_ALLOWED_UNDER_SECURITY_SETTINGS) {
+			/* SDM bypass authentication */
+			printf("%s 0x%016llx (%ld bytes)\n",
+			       "Image Authentication bypassed at address",
+			       img_addr, img_sz);
+			return 0;
+		}
+		puts("VAB certificate authentication failed in SDM");
+		if (ret == MBOX_RESP_DEVICE_BUSY) {
+			puts(" (SDM busy timeout)\n");
+			return -ETIMEDOUT;
+		} else if (ret == MBOX_RESP_UNKNOWN) {
+			puts(" (Not supported)\n");
+			return -ESRCH;
+		}
+		puts("\n");
+		return -EKEYREJECTED;
+	} else {
+		/* If Certificate Process Status has error */
+		if (resp) {
+			puts("VAB certificate process failed\n");
+			return -ENOEXEC;
+		}
+	}
+
+	printf("%s 0x%016llx (%ld bytes)\n",
+	       "Image Authentication passed at address", img_addr, img_sz);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/smc_api.c b/roms/u-boot/arch/arm/mach-socfpga/smc_api.c
new file mode 100644
index 000000000..8ffc7a472
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/smc_api.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <linux/intel-smc.h>
+
+int invoke_smc(u32 func_id, u64 *args, int arg_len, u64 *ret_arg, int ret_len)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+	regs.regs[0] = func_id;
+
+	if (args)
+		memcpy(&regs.regs[1], args, arg_len * sizeof(*args));
+
+	smc_call(&regs);
+
+	if (ret_arg)
+		memcpy(ret_arg, &regs.regs[1], ret_len * sizeof(*ret_arg));
+
+	return regs.regs[0];
+}
+
+int smc_send_mailbox(u32 cmd, u32 len, u32 *arg, u8 urgent, u32 *resp_buf_len,
+		     u32 *resp_buf)
+{
+	int ret;
+	u64 args[6];
+	u64 resp[3];
+
+	args[0] = cmd;
+	args[1] = (u64)arg;
+	args[2] = len;
+	args[3] = urgent;
+	args[4] = (u64)resp_buf;
+	if (resp_buf_len)
+		args[5] = *resp_buf_len;
+	else
+		args[5] = 0;
+
+	ret = invoke_smc(INTEL_SIP_SMC_MBOX_SEND_CMD, args, ARRAY_SIZE(args),
+			 resp, ARRAY_SIZE(resp));
+
+	if (ret == INTEL_SIP_SMC_STATUS_OK && resp_buf && resp_buf_len) {
+		if (!resp[0])
+			*resp_buf_len = resp[1];
+	}
+
+	return (int)resp[0];
+}
+
+int smc_get_usercode(u32 *usercode)
+{
+	int ret;
+	u64 resp;
+
+	if (!usercode)
+		return -EINVAL;
+
+	ret = invoke_smc(INTEL_SIP_SMC_GET_USERCODE, NULL, 0,
+			 &resp, 1);
+
+	if (ret == INTEL_SIP_SMC_STATUS_OK)
+		*usercode = (u32)resp;
+
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/spl_a10.c b/roms/u-boot/arch/arm/mach-socfpga/spl_a10.c
new file mode 100644
index 000000000..b5f43f09d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/spl_a10.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2012-2019 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <init.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/pl310.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <image.h>
+#include <asm/arch/reset_manager.h>
+#include <spl.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram.h>
+#include <asm/arch/scu.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/nic301.h>
+#include <asm/sections.h>
+#include <fdtdec.h>
+#include <watchdog.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/fpga_manager.h>
+#include <mmc.h>
+#include <memalign.h>
+
+#define FPGA_BUFSIZ	16 * 1024
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define BOOTROM_SHARED_MEM_SIZE		0x800	/* 2KB */
+#define BOOTROM_SHARED_MEM_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 SOCFPGA_PHYS_OCRAM_SIZE - \
+					 BOOTROM_SHARED_MEM_SIZE)
+#define RST_STATUS_SHARED_ADDR		(BOOTROM_SHARED_MEM_ADDR + 0x438)
+static u32 rst_mgr_status __section(".data");
+
+/*
+ * Bootrom will clear the status register in reset manager and stores the
+ * reset status value in shared memory. Bootrom stores shared data at last
+ * 2KB of onchip RAM.
+ * This function save reset status provided by BootROM to rst_mgr_status.
+ * More information about reset status register value can be found in reset
+ * manager register description.
+ * When running in debugger without Bootrom, r0 to r3 are random values.
+ * So, skip save the value when r0 is not BootROM shared data address.
+ *
+ * r0 - Contains the pointer to the shared memory block. The shared
+ *	memory block is located in the top 2 KB of on-chip RAM.
+ * r1 - contains the length of the shared memory.
+ * r2 - unused and set to 0x0.
+ * r3 - points to the version block.
+ */
+void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,
+		      unsigned long r3)
+{
+	if (r0 == BOOTROM_SHARED_MEM_ADDR)
+		rst_mgr_status = readl(RST_STATUS_SHARED_ADDR);
+
+	save_boot_params_ret();
+}
+
+u32 spl_boot_device(void)
+{
+	const u32 bsel = readl(socfpga_get_sysmgr_addr() + SYSMGR_A10_BOOTINFO);
+
+	switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
+	case 0x1:	/* FPGA (HPS2FPGA Bridge) */
+		return BOOT_DEVICE_RAM;
+	case 0x2:	/* NAND Flash (1.8V) */
+	case 0x3:	/* NAND Flash (3.0V) */
+		socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
+		return BOOT_DEVICE_NAND;
+	case 0x4:	/* SD/MMC External Transceiver (1.8V) */
+	case 0x5:	/* SD/MMC Internal Transceiver (3.0V) */
+		socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
+		socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
+		return BOOT_DEVICE_MMC1;
+	case 0x6:	/* QSPI Flash (1.8V) */
+	case 0x7:	/* QSPI Flash (3.0V) */
+		socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
+		return BOOT_DEVICE_SPI;
+	default:
+		printf("Invalid boot device (bsel=%08x)!\n", bsel);
+		hang();
+	}
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
+	return MMCSD_MODE_FS;
+#else
+	return MMCSD_MODE_RAW;
+#endif
+}
+#endif
+
+void spl_board_init(void)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(char, buf, FPGA_BUFSIZ);
+
+	/* enable console uart printing */
+	preloader_console_init();
+	WATCHDOG_RESET();
+
+	arch_early_init_r();
+
+	/* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */
+	if (is_fpgamgr_user_mode()) {
+		int ret = config_pins(gd->fdt_blob, "shared");
+
+		if (ret)
+			return;
+
+		ret = config_pins(gd->fdt_blob, "fpga");
+		if (ret)
+			return;
+	} else if (!is_fpgamgr_early_user_mode()) {
+		/* Program IOSSM(early IO release) or full FPGA */
+		fpgamgr_program(buf, FPGA_BUFSIZ, 0);
+	}
+
+	/* If the IOSSM/full FPGA is already loaded, start DDR */
+	if (is_fpgamgr_early_user_mode() || is_fpgamgr_user_mode())
+		ddr_calibration_sequence();
+
+	if (!is_fpgamgr_user_mode())
+		fpgamgr_program(buf, FPGA_BUFSIZ, 0);
+}
+
+void board_init_f(ulong dummy)
+{
+	if (spl_early_init())
+		hang();
+
+	socfpga_get_managers_addr();
+
+	dcache_disable();
+
+	socfpga_init_security_policies();
+	socfpga_sdram_remap_zero();
+	socfpga_pl310_clear();
+
+	/* Assert reset to all except L4WD0 and L4TIMER0 */
+	socfpga_per_reset_all();
+	socfpga_watchdog_disable();
+
+	/* Configure the clock based on handoff */
+	cm_basic_init(gd->fdt_blob);
+
+#ifdef CONFIG_HW_WATCHDOG
+	/* release osc1 watchdog timer 0 from reset */
+	socfpga_reset_deassert_osc1wd0();
+
+	/* reconfigure and enable the watchdog */
+	hw_watchdog_init();
+	WATCHDOG_RESET();
+#endif /* CONFIG_HW_WATCHDOG */
+
+	config_dedicated_pins(gd->fdt_blob);
+	WATCHDOG_RESET();
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/spl_agilex.c b/roms/u-boot/arch/arm/mach-socfpga/spl_agilex.c
new file mode 100644
index 000000000..ee5a9dc1e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/spl_agilex.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <common.h>
+#include <hang.h>
+#include <image.h>
+#include <spl.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/firewall.h>
+#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <watchdog.h>
+#include <dm/uclass.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong dummy)
+{
+	int ret;
+	struct udevice *dev;
+
+	ret = spl_early_init();
+	if (ret)
+		hang();
+
+	socfpga_get_managers_addr();
+
+	/* Ensure watchdog is paused when debugging is happening */
+	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
+
+#ifdef CONFIG_HW_WATCHDOG
+	/* Enable watchdog before initializing the HW */
+	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
+	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
+	hw_watchdog_init();
+#endif
+
+	/* ensure all processors are not released prior Linux boot */
+	writeq(0, CPU_RELEASE_ADDR);
+
+	timer_init();
+
+	sysmgr_pinmux_init();
+
+	ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+	if (ret) {
+		debug("Clock init failed: %d\n", ret);
+		hang();
+	}
+
+	preloader_console_init();
+	print_reset_info();
+	cm_print_clock_quick_summary();
+
+	firewall_setup();
+	ret = uclass_get_device(UCLASS_CACHE, 0, &dev);
+	if (ret) {
+		debug("CCU init failed: %d\n", ret);
+		hang();
+	}
+
+#if CONFIG_IS_ENABLED(ALTERA_SDRAM)
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM init failed: %d\n", ret);
+		hang();
+	}
+#endif
+
+	mbox_init();
+
+#ifdef CONFIG_CADENCE_QSPI
+	mbox_qspi_open();
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/spl_gen5.c b/roms/u-boot/arch/arm/mach-socfpga/spl_gen5.c
new file mode 100644
index 000000000..7c7161176
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/spl_gen5.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <image.h>
+#include <asm/arch/reset_manager.h>
+#include <spl.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram.h>
+#include <asm/sections.h>
+#include <debug_uart.h>
+#include <fdtdec.h>
+#include <watchdog.h>
+#include <dm/uclass.h>
+#include <linux/bitops.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 spl_boot_device(void)
+{
+	const u32 bsel = readl(socfpga_get_sysmgr_addr() +
+			       SYSMGR_GEN5_BOOTINFO);
+
+	switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
+	case 0x1:	/* FPGA (HPS2FPGA Bridge) */
+		return BOOT_DEVICE_RAM;
+	case 0x2:	/* NAND Flash (1.8V) */
+	case 0x3:	/* NAND Flash (3.0V) */
+		return BOOT_DEVICE_NAND;
+	case 0x4:	/* SD/MMC External Transceiver (1.8V) */
+	case 0x5:	/* SD/MMC Internal Transceiver (3.0V) */
+		return BOOT_DEVICE_MMC1;
+	case 0x6:	/* QSPI Flash (1.8V) */
+	case 0x7:	/* QSPI Flash (3.0V) */
+		return BOOT_DEVICE_SPI;
+	default:
+		printf("Invalid boot device (bsel=%08x)!\n", bsel);
+		hang();
+	}
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
+	return MMCSD_MODE_FS;
+#else
+	return MMCSD_MODE_RAW;
+#endif
+}
+#endif
+
+void board_init_f(ulong dummy)
+{
+	const struct cm_config *cm_default_cfg = cm_get_default_config();
+	unsigned long reg;
+	int ret;
+	struct udevice *dev;
+
+	ret = spl_early_init();
+	if (ret)
+		hang();
+
+	socfpga_get_managers_addr();
+
+	/*
+	 * Clear fake OCRAM ECC first as SBE
+	 * and DBE might triggered during power on
+	 */
+	reg = readl(socfpga_get_sysmgr_addr() + SYSMGR_GEN5_ECCGRP_OCRAM);
+	if (reg & SYSMGR_ECC_OCRAM_SERR)
+		writel(SYSMGR_ECC_OCRAM_SERR | SYSMGR_ECC_OCRAM_EN,
+		       socfpga_get_sysmgr_addr() + SYSMGR_GEN5_ECCGRP_OCRAM);
+	if (reg & SYSMGR_ECC_OCRAM_DERR)
+		writel(SYSMGR_ECC_OCRAM_DERR  | SYSMGR_ECC_OCRAM_EN,
+		       socfpga_get_sysmgr_addr() + SYSMGR_GEN5_ECCGRP_OCRAM);
+
+	socfpga_sdram_remap_zero();
+	socfpga_pl310_clear();
+
+	debug("Freezing all I/O banks\n");
+	/* freeze all IO banks */
+	sys_mgr_frzctrl_freeze_req();
+
+	/* Put everything into reset but L4WD0. */
+	socfpga_per_reset_all();
+
+	if (!socfpga_is_booting_from_fpga()) {
+		/* Put FPGA bridges into reset too. */
+		socfpga_bridges_reset(1);
+	}
+
+	socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0);
+	timer_init();
+
+	debug("Reconfigure Clock Manager\n");
+	/* reconfigure the PLLs */
+	if (cm_basic_init(cm_default_cfg))
+		hang();
+
+	/* Enable bootrom to configure IOs. */
+	sysmgr_config_warmrstcfgio(1);
+
+	/* configure the IOCSR / IO buffer settings */
+	if (scan_mgr_configure_iocsr())
+		hang();
+
+	sysmgr_config_warmrstcfgio(0);
+
+	/* configure the pin muxing through system manager */
+	sysmgr_config_warmrstcfgio(1);
+	sysmgr_pinmux_init();
+	sysmgr_config_warmrstcfgio(0);
+
+	/* Set bridges handoff value */
+	socfpga_bridges_set_handoff_regs(true, true, true);
+
+	debug("Unfreezing/Thaw all I/O banks\n");
+	/* unfreeze / thaw all IO banks */
+	sys_mgr_frzctrl_thaw_req();
+
+#ifdef CONFIG_DEBUG_UART
+	socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
+	debug_uart_init();
+#endif
+
+	ret = uclass_get_device(UCLASS_RESET, 0, &dev);
+	if (ret)
+		debug("Reset init failed: %d\n", ret);
+
+#ifdef CONFIG_SPL_NAND_DENALI
+	clrbits_le32(SOCFPGA_RSTMGR_ADDRESS + RSTMGR_GEN5_PERMODRST, BIT(4));
+#endif
+
+	/* enable console uart printing */
+	preloader_console_init();
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM init failed: %d\n", ret);
+		hang();
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/spl_s10.c b/roms/u-boot/arch/arm/mach-socfpga/spl_s10.c
new file mode 100644
index 000000000..c20e87cdb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/spl_s10.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <common.h>
+#include <debug_uart.h>
+#include <image.h>
+#include <spl.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/firewall.h>
+#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <watchdog.h>
+#include <dm/uclass.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong dummy)
+{
+	const struct cm_config *cm_default_cfg = cm_get_default_config();
+	int ret;
+
+	ret = spl_early_init();
+	if (ret)
+		hang();
+
+	socfpga_get_managers_addr();
+
+	/* Ensure watchdog is paused when debugging is happening */
+	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
+
+#ifdef CONFIG_HW_WATCHDOG
+	/* Enable watchdog before initializing the HW */
+	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
+	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
+	hw_watchdog_init();
+#endif
+
+	/* ensure all processors are not released prior Linux boot */
+	writeq(0, CPU_RELEASE_ADDR);
+
+	socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0);
+	timer_init();
+
+	sysmgr_pinmux_init();
+
+	/* configuring the HPS clocks */
+	cm_basic_init(cm_default_cfg);
+
+#ifdef CONFIG_DEBUG_UART
+	socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
+	debug_uart_init();
+#endif
+
+	preloader_console_init();
+	print_reset_info();
+	cm_print_clock_quick_summary();
+
+	firewall_setup();
+
+	/* disable ocram security at CCU for non secure access */
+	clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADMASK_MEM_RAM0),
+		     CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
+	clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADMASK_MEM_RAM0),
+		     CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
+
+#if CONFIG_IS_ENABLED(ALTERA_SDRAM)
+		struct udevice *dev;
+
+		ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+		if (ret) {
+			debug("DRAM init failed: %d\n", ret);
+			hang();
+		}
+#endif
+
+	mbox_init();
+
+#ifdef CONFIG_CADENCE_QSPI
+	mbox_qspi_open();
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/spl_soc64.c b/roms/u-boot/arch/arm/mach-socfpga/spl_soc64.c
new file mode 100644
index 000000000..cb98ab39e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/spl_soc64.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2020 Intel Corporation. All rights reserved
+ *
+ */
+
+#include <common.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_MMC1;
+}
+
+#if IS_ENABLED(CONFIG_SPL_MMC_SUPPORT)
+u32 spl_boot_mode(const u32 boot_device)
+{
+	if (IS_ENABLED(CONFIG_SPL_FS_FAT) || IS_ENABLED(CONFIG_SPL_FS_EXT4))
+		return MMCSD_MODE_FS;
+	else
+		return MMCSD_MODE_RAW;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-socfpga/system_manager_gen5.c b/roms/u-boot/arch/arm/mach-socfpga/system_manager_gen5.c
new file mode 100644
index 000000000..09caebb3c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/system_manager_gen5.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/fpga_manager.h>
+
+/*
+ * Populate the value for SYSMGR.FPGAINTF.MODULE based on pinmux setting.
+ * The value is not wrote to SYSMGR.FPGAINTF.MODULE but
+ * CONFIG_SYSMGR_ISWGRP_HANDOFF.
+ */
+static void populate_sysmgr_fpgaintf_module(void)
+{
+	u32 handoff_val = 0;
+
+	/* ISWGRP_HANDOFF_FPGAINTF */
+	writel(0, socfpga_get_sysmgr_addr() + SYSMGR_ISWGRP_HANDOFF_OFFSET(2));
+
+	/* Enable the signal for those HPS peripherals that use FPGA. */
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_GEN5_NAND_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_NAND;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_GEN5_RGMII1_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_EMAC1;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_GEN5_SDMMC_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_SDMMC;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_GEN5_RGMII0_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_EMAC0;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_GEN5_SPIM0_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_SPIM0;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_GEN5_SPIM1_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_SPIM1;
+
+	/* populate (not writing) the value for SYSMGR.FPGAINTF.MODULE
+	based on pinmux setting */
+	setbits_le32(socfpga_get_sysmgr_addr() +
+		     SYSMGR_ISWGRP_HANDOFF_OFFSET(2),
+		     handoff_val);
+
+	handoff_val = readl(socfpga_get_sysmgr_addr() +
+			    SYSMGR_ISWGRP_HANDOFF_OFFSET(2));
+	if (fpgamgr_test_fpga_ready()) {
+		/* Enable the required signals only */
+		writel(handoff_val,
+		       socfpga_get_sysmgr_addr() +
+		       SYSMGR_GEN5_FPGAINFGRP_MODULE);
+	}
+}
+
+/*
+ * Configure all the pin muxes
+ */
+void sysmgr_pinmux_init(void)
+{
+	u32 regs = (u32)socfpga_get_sysmgr_addr() + SYSMGR_GEN5_EMACIO;
+	const u8 *sys_mgr_init_table;
+	unsigned int len;
+	int i;
+
+	sysmgr_get_pinmux_table(&sys_mgr_init_table, &len);
+
+	for (i = 0; i < len; i++) {
+		writel(sys_mgr_init_table[i], regs);
+		regs += sizeof(regs);
+	}
+
+	populate_sysmgr_fpgaintf_module();
+}
+
+/*
+ * This bit allows the bootrom to configure the IOs after a warm reset.
+ */
+void sysmgr_config_warmrstcfgio(int enable)
+{
+	if (enable)
+		setbits_le32(socfpga_get_sysmgr_addr() +
+			     SYSMGR_GEN5_ROMCODEGRP_CTRL,
+			     SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO);
+	else
+		clrbits_le32(socfpga_get_sysmgr_addr() +
+			     SYSMGR_GEN5_ROMCODEGRP_CTRL,
+			     SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/system_manager_soc64.c b/roms/u-boot/arch/arm/mach-socfpga/system_manager_soc64.c
new file mode 100644
index 000000000..3b5e774e2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/system_manager_soc64.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <asm/arch/handoff_soc64.h>
+#include <asm/arch/system_manager.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Configure all the pin muxes
+ */
+void sysmgr_pinmux_init(void)
+{
+	populate_sysmgr_pinmux();
+	populate_sysmgr_fpgaintf_module();
+}
+
+/*
+ * Populate the value for SYSMGR.FPGAINTF.MODULE based on pinmux setting.
+ * The value is not wrote to SYSMGR.FPGAINTF.MODULE but
+ * CONFIG_SYSMGR_ISWGRP_HANDOFF.
+ */
+void populate_sysmgr_fpgaintf_module(void)
+{
+	u32 handoff_val = 0;
+
+	/* Enable the signal for those HPS peripherals that use FPGA. */
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_NAND_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_NAND;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_SDMMC_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_SDMMC;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_SPIM0_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_SPIM0;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_SPIM1_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_SPIM1;
+	writel(handoff_val,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_FPGAINTF_EN2);
+
+	handoff_val = 0;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_EMAC0_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_EMAC0;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_EMAC1_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_EMAC1;
+	if (readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_EMAC2_USEFPGA) ==
+	    SYSMGR_FPGAINTF_USEFPGA)
+		handoff_val |= SYSMGR_FPGAINTF_EMAC2;
+	writel(handoff_val,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_FPGAINTF_EN3);
+}
+
+/*
+ * Configure all the pin muxes
+ */
+void populate_sysmgr_pinmux(void)
+{
+	u32 len, i;
+	u32 len_mux = socfpga_get_handoff_size((void *)SOC64_HANDOFF_MUX, BIG_ENDIAN);
+	u32 len_ioctl = socfpga_get_handoff_size((void *)SOC64_HANDOFF_IOCTL, BIG_ENDIAN);
+	u32 len_fpga = socfpga_get_handoff_size((void *)SOC64_HANDOFF_FPGA, BIG_ENDIAN);
+	u32 len_delay = socfpga_get_handoff_size((void *)SOC64_HANDOFF_DELAY, BIG_ENDIAN);
+
+	len = (len_mux > len_ioctl) ? len_mux : len_ioctl;
+	len = (len > len_fpga) ? len : len_fpga;
+	len = (len > len_delay) ? len : len_delay;
+
+	u32 handoff_table[len];
+
+	/* setup the pin sel */
+	len = (len_mux < SOC64_HANDOFF_MUX_LEN) ? len_mux : SOC64_HANDOFF_MUX_LEN;
+	socfpga_handoff_read((void *)SOC64_HANDOFF_MUX, handoff_table, len, BIG_ENDIAN);
+	for (i = 0; i < len; i = i + 2) {
+		writel(handoff_table[i + 1],
+		       handoff_table[i] +
+		       (u8 *)socfpga_get_sysmgr_addr() +
+		       SYSMGR_SOC64_PINSEL0);
+	}
+
+	/* setup the pin ctrl */
+	len = (len_ioctl < SOC64_HANDOFF_IOCTL_LEN) ? len_ioctl : SOC64_HANDOFF_IOCTL_LEN;
+	socfpga_handoff_read((void *)SOC64_HANDOFF_IOCTL, handoff_table, len, BIG_ENDIAN);
+	for (i = 0; i < len; i = i + 2) {
+		writel(handoff_table[i + 1],
+		       handoff_table[i] +
+		       (u8 *)socfpga_get_sysmgr_addr() +
+		       SYSMGR_SOC64_IOCTRL0);
+	}
+
+	/* setup the fpga use */
+	len = (len_fpga < SOC64_HANDOFF_FPGA_LEN) ? len_fpga : SOC64_HANDOFF_FPGA_LEN;
+	socfpga_handoff_read((void *)SOC64_HANDOFF_FPGA, handoff_table, len, BIG_ENDIAN);
+	for (i = 0; i < len; i = i + 2) {
+		writel(handoff_table[i + 1],
+		       handoff_table[i] +
+		       (u8 *)socfpga_get_sysmgr_addr() +
+		       SYSMGR_SOC64_EMAC0_USEFPGA);
+	}
+
+	/* setup the IO delay */
+	len = (len_delay < SOC64_HANDOFF_DELAY_LEN) ? len_delay : SOC64_HANDOFF_DELAY_LEN;
+	socfpga_handoff_read((void *)SOC64_HANDOFF_DELAY, handoff_table, len, BIG_ENDIAN);
+	for (i = 0; i < len; i = i + 2) {
+		writel(handoff_table[i + 1],
+		       handoff_table[i] +
+		       (u8 *)socfpga_get_sysmgr_addr() +
+		       SYSMGR_SOC64_IODELAY0);
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/timer.c b/roms/u-boot/arch/arm/mach-socfpga/timer.c
new file mode 100644
index 000000000..a58f1cf9d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/timer.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+
+#define TIMER_LOAD_VAL		0xFFFFFFFF
+
+static const struct socfpga_timer *timer_base = (void *)CONFIG_SYS_TIMERBASE;
+
+/*
+ * Timer initialization
+ */
+int timer_init(void)
+{
+	writel(TIMER_LOAD_VAL, &timer_base->load_val);
+	writel(TIMER_LOAD_VAL, &timer_base->curr_val);
+	writel(readl(&timer_base->ctrl) | 0x3, &timer_base->ctrl);
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/timer_s10.c b/roms/u-boot/arch/arm/mach-socfpga/timer_s10.c
new file mode 100644
index 000000000..7d5598e1a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/timer_s10.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+
+/*
+ * Timer initialization
+ */
+int timer_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	int enable = 0x3;	/* timer enable + output signal masked */
+	int loadval = ~0;
+
+	/* enable system counter */
+	writel(enable, SOCFPGA_GTIMER_SEC_ADDRESS);
+	/* enable processor pysical counter */
+	asm volatile("msr cntp_ctl_el0, %0" : : "r" (enable));
+	asm volatile("msr cntp_tval_el0, %0" : : "r" (loadval));
+#endif
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/vab.c b/roms/u-boot/arch/arm/mach-socfpga/vab.c
new file mode 100644
index 000000000..85b3f3021
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/vab.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <asm/arch/secure_vab.h>
+#include <command.h>
+#include <common.h>
+#include <linux/ctype.h>
+
+static int do_vab(struct cmd_tbl *cmdtp, int flag, int argc,
+		  char *const argv[])
+{
+	unsigned long addr, len;
+
+	if (argc < 3)
+		return CMD_RET_USAGE;
+
+	addr = simple_strtoul(argv[1], NULL, 16);
+	len = simple_strtoul(argv[2], NULL, 16);
+
+	if (socfpga_vendor_authentication((void *)&addr, (size_t *)&len) != 0)
+		return CMD_RET_FAILURE;
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	vab,	3,	2,	do_vab,
+	"perform vendor authorization",
+	"addr len   - authorize 'len' bytes starting at\n"
+	"                 'addr' via vendor public key"
+);
diff --git a/roms/u-boot/arch/arm/mach-socfpga/wrap_handoff_soc64.c b/roms/u-boot/arch/arm/mach-socfpga/wrap_handoff_soc64.c
new file mode 100644
index 000000000..a7ad7a18e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/wrap_handoff_soc64.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <asm/arch/handoff_soc64.h>
+#include <asm/io.h>
+#include <common.h>
+#include <errno.h>
+#include "log.h"
+
+int socfpga_get_handoff_size(void *handoff_address, enum endianness endian)
+{
+	u32 size;
+
+	size = readl(handoff_address + SOC64_HANDOFF_OFFSET_LENGTH);
+	if (endian == BIG_ENDIAN)
+		size = swab32(size);
+
+	size = (size - SOC64_HANDOFF_OFFSET_DATA) / sizeof(u32);
+
+	debug("%s: handoff address = 0x%p handoff size = 0x%08x\n", __func__,
+	      (u32 *)handoff_address, size);
+
+	return size;
+}
+
+int socfpga_handoff_read(void *handoff_address, void *table, u32 table_len,
+			 enum endianness big_endian)
+{
+	u32 temp, i;
+	u32 *table_x32 = table;
+
+	debug("%s: handoff addr = 0x%p ", __func__, (u32 *)handoff_address);
+
+	if (big_endian) {
+		if (swab32(readl(SOC64_HANDOFF_BASE)) == SOC64_HANDOFF_MAGIC_BOOT) {
+			debug("Handoff table address = 0x%p ", table_x32);
+			debug("table length = 0x%x\n", table_len);
+			debug("%s: handoff data =\n{\n", __func__);
+
+			for (i = 0; i < table_len; i++) {
+				temp = readl(handoff_address +
+					     SOC64_HANDOFF_OFFSET_DATA +
+					     (i * sizeof(u32)));
+				*table_x32 = swab32(temp);
+
+				if (!(i % 2))
+					debug(" No.%d Addr 0x%08x: ", i,
+					      *table_x32);
+				else
+					debug(" 0x%08x\n", *table_x32);
+
+				table_x32++;
+			}
+			debug("\n}\n");
+		} else {
+			debug("%s: Cannot find SOC64_HANDOFF_MAGIC_BOOT ", __func__);
+			debug("at addr  0x%p\n", (u32 *)handoff_address);
+			return -EPERM;
+		}
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/wrap_iocsr_config.c b/roms/u-boot/arch/arm/mach-socfpga/wrap_iocsr_config.c
new file mode 100644
index 000000000..f810fade9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/wrap_iocsr_config.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/arch/clock_manager.h>
+
+/* Board-specific header. */
+#include <qts/iocsr_config.h>
+
+int iocsr_get_config_table(const unsigned int chain_id,
+			   const unsigned long **table,
+			   unsigned int *table_len)
+{
+	switch (chain_id) {
+	case 0:
+		*table = iocsr_scan_chain0_table;
+		*table_len = CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH;
+		break;
+	case 1:
+		*table = iocsr_scan_chain1_table;
+		*table_len = CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH;
+		break;
+	case 2:
+		*table = iocsr_scan_chain2_table;
+		*table_len = CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH;
+		break;
+	case 3:
+		*table = iocsr_scan_chain3_table;
+		*table_len = CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/wrap_pinmux_config.c b/roms/u-boot/arch/arm/mach-socfpga/wrap_pinmux_config.c
new file mode 100644
index 000000000..33ca14c9d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/wrap_pinmux_config.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include <common.h>
+#include <errno.h>
+
+/* Board-specific header. */
+#include <qts/pinmux_config.h>
+
+void sysmgr_get_pinmux_table(const u8 **table, unsigned int *table_len)
+{
+	*table = sys_mgr_init_table;
+	*table_len = ARRAY_SIZE(sys_mgr_init_table);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/wrap_pll_config.c b/roms/u-boot/arch/arm/mach-socfpga/wrap_pll_config.c
new file mode 100644
index 000000000..bd631e0fb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/wrap_pll_config.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include <common.h>
+#include <asm/arch/clock_manager.h>
+#include <qts/pll_config.h>
+
+#define MAIN_VCO_BASE (					\
+	(CONFIG_HPS_MAINPLLGRP_VCO_DENOM <<		\
+		CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) |	\
+	(CONFIG_HPS_MAINPLLGRP_VCO_NUMER <<		\
+		CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET)	\
+	)
+
+#define PERI_VCO_BASE (					\
+	(CONFIG_HPS_PERPLLGRP_VCO_PSRC <<		\
+		CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET) |	\
+	(CONFIG_HPS_PERPLLGRP_VCO_DENOM <<		\
+		CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) |	\
+	(CONFIG_HPS_PERPLLGRP_VCO_NUMER <<		\
+		CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET)	\
+	)
+
+#define SDR_VCO_BASE (					\
+	(CONFIG_HPS_SDRPLLGRP_VCO_SSRC <<		\
+		CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET) |	\
+	(CONFIG_HPS_SDRPLLGRP_VCO_DENOM <<		\
+		CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) |	\
+	(CONFIG_HPS_SDRPLLGRP_VCO_NUMER <<		\
+		CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET)	\
+	)
+
+static const struct cm_config cm_default_cfg = {
+	/* main group */
+	MAIN_VCO_BASE,
+	(CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT <<
+		CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT <<
+		CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT <<
+		CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT <<
+		CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT <<
+		CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT <<
+		CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK <<
+		CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET) |
+	(CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK <<
+		CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET) |
+	(CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK <<
+		CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET) |
+	(CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK <<
+		CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK <<
+		CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET) |
+	(CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK <<
+		CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK <<
+		CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET),
+	(CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP <<
+		CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET) |
+	(CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP <<
+		CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET),
+
+	/* peripheral group */
+	PERI_VCO_BASE,
+	(CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT <<
+		CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET),
+	(CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT <<
+		CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET),
+	(CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT <<
+		CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET),
+	(CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT <<
+		CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET),
+	(CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT <<
+		CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET),
+	(CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT <<
+		CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET),
+	(CONFIG_HPS_PERPLLGRP_DIV_USBCLK <<
+		CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET) |
+	(CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK <<
+		CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET) |
+	(CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK <<
+		CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET) |
+	(CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK <<
+		CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET),
+	(CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK <<
+		CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET),
+	(CONFIG_HPS_PERPLLGRP_SRC_QSPI <<
+		CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET) |
+	(CONFIG_HPS_PERPLLGRP_SRC_NAND <<
+		CLKMGR_PERPLLGRP_SRC_NAND_OFFSET) |
+	(CONFIG_HPS_PERPLLGRP_SRC_SDMMC <<
+		CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET),
+
+	/* sdram pll group */
+	SDR_VCO_BASE,
+	(CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE <<
+		CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET) |
+	(CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT <<
+		CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET),
+	(CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE <<
+		CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET) |
+	(CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT <<
+		CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET),
+	(CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE <<
+		CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET) |
+	(CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT <<
+		CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET),
+	(CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE <<
+		CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET) |
+	(CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT <<
+		CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET),
+
+	/* altera group */
+	CONFIG_HPS_ALTERAGRP_MPUCLK,
+};
+
+const struct cm_config * const cm_get_default_config(void)
+{
+	return &cm_default_cfg;
+}
+
+const unsigned int cm_get_osc_clk_hz(const int osc)
+{
+	if (osc == 1)
+		return CONFIG_HPS_CLK_OSC1_HZ;
+	else if (osc == 2)
+		return CONFIG_HPS_CLK_OSC2_HZ;
+	else
+		return 0;
+}
+
+const unsigned int cm_get_f2s_per_ref_clk_hz(void)
+{
+	return CONFIG_HPS_CLK_F2S_PER_REF_HZ;
+}
+
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void)
+{
+	return CONFIG_HPS_CLK_F2S_SDR_REF_HZ;
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/wrap_pll_config_soc64.c b/roms/u-boot/arch/arm/mach-socfpga/wrap_pll_config_soc64.c
new file mode 100644
index 000000000..6a0d6b5ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/wrap_pll_config_soc64.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/io.h>
+#include <asm/arch/handoff_soc64.h>
+#include <asm/arch/system_manager.h>
+
+const struct cm_config * const cm_get_default_config(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	struct cm_config *cm_handoff_cfg = (struct cm_config *)
+		(SOC64_HANDOFF_CLOCK + SOC64_HANDOFF_OFFSET_DATA);
+	u32 *conversion = (u32 *)cm_handoff_cfg;
+	u32 i;
+	u32 handoff_clk = readl(SOC64_HANDOFF_CLOCK);
+
+	if (swab32(handoff_clk) == SOC64_HANDOFF_MAGIC_CLOCK) {
+		writel(swab32(handoff_clk), SOC64_HANDOFF_CLOCK);
+		for (i = 0; i < (sizeof(*cm_handoff_cfg) / sizeof(u32)); i++)
+			conversion[i] = swab32(conversion[i]);
+		return cm_handoff_cfg;
+	} else if (handoff_clk == SOC64_HANDOFF_MAGIC_CLOCK) {
+		return cm_handoff_cfg;
+	}
+#endif
+	return NULL;
+}
+
+const unsigned int cm_get_osc_clk_hz(void)
+{
+#ifdef CONFIG_SPL_BUILD
+
+	u32 clock = readl(SOC64_HANDOFF_CLOCK_OSC);
+
+	writel(clock,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_BOOT_SCRATCH_COLD1);
+#endif
+	return readl(socfpga_get_sysmgr_addr() +
+		     SYSMGR_SOC64_BOOT_SCRATCH_COLD1);
+}
+
+const unsigned int cm_get_intosc_clk_hz(void)
+{
+	return CLKMGR_INTOSC_HZ;
+}
+
+const unsigned int cm_get_fpga_clk_hz(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	u32 clock = readl(SOC64_HANDOFF_CLOCK_FPGA);
+
+	writel(clock,
+	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_BOOT_SCRATCH_COLD2);
+#endif
+	return readl(socfpga_get_sysmgr_addr() +
+		     SYSMGR_SOC64_BOOT_SCRATCH_COLD2);
+}
diff --git a/roms/u-boot/arch/arm/mach-socfpga/wrap_sdram_config.c b/roms/u-boot/arch/arm/mach-socfpga/wrap_sdram_config.c
new file mode 100644
index 000000000..4ea32e72c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-socfpga/wrap_sdram_config.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/arch/sdram.h>
+
+/* Board-specific header. */
+#include <qts/sdram_config.h>
+
+static const struct socfpga_sdram_config sdram_config = {
+	.ctrl_cfg =
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE <<
+			SDR_CTRLGRP_CTRLCFG_MEMTYPE_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL <<
+			SDR_CTRLGRP_CTRLCFG_MEMBL_LSB)			|
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER <<
+			SDR_CTRLGRP_CTRLCFG_ADDRORDER_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN <<
+			SDR_CTRLGRP_CTRLCFG_ECCEN_LSB)			|
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN <<
+			SDR_CTRLGRP_CTRLCFG_ECCCORREN_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN <<
+			SDR_CTRLGRP_CTRLCFG_REORDEREN_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT <<
+			SDR_CTRLGRP_CTRLCFG_STARVELIMIT_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN <<
+			SDR_CTRLGRP_CTRLCFG_DQSTRKEN_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS <<
+			SDR_CTRLGRP_CTRLCFG_NODMPINS_LSB),
+	.dram_timing1 =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL <<
+			SDR_CTRLGRP_DRAMTIMING1_TCWL_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL <<
+			SDR_CTRLGRP_DRAMTIMING1_TAL_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL <<
+			SDR_CTRLGRP_DRAMTIMING1_TCL_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD <<
+			SDR_CTRLGRP_DRAMTIMING1_TRRD_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW <<
+			SDR_CTRLGRP_DRAMTIMING1_TFAW_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC <<
+			SDR_CTRLGRP_DRAMTIMING1_TRFC_LSB),
+	.dram_timing2 =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI <<
+			SDR_CTRLGRP_DRAMTIMING2_TREFI_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD <<
+			SDR_CTRLGRP_DRAMTIMING2_TRCD_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP <<
+			SDR_CTRLGRP_DRAMTIMING2_TRP_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR <<
+			SDR_CTRLGRP_DRAMTIMING2_TWR_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR <<
+			SDR_CTRLGRP_DRAMTIMING2_TWTR_LSB),
+	.dram_timing3 =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP <<
+			SDR_CTRLGRP_DRAMTIMING3_TRTP_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS <<
+			SDR_CTRLGRP_DRAMTIMING3_TRAS_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC <<
+			SDR_CTRLGRP_DRAMTIMING3_TRC_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD <<
+			SDR_CTRLGRP_DRAMTIMING3_TMRD_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD <<
+			SDR_CTRLGRP_DRAMTIMING3_TCCD_LSB),
+	.dram_timing4 =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT <<
+			SDR_CTRLGRP_DRAMTIMING4_SELFRFSHEXIT_LSB)	|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT <<
+			SDR_CTRLGRP_DRAMTIMING4_PWRDOWNEXIT_LSB),
+	.lowpwr_timing =
+		(CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES <<
+			SDR_CTRLGRP_LOWPWRTIMING_AUTOPDCYCLES_LSB)	|
+		(CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES <<
+			SDR_CTRLGRP_LOWPWRTIMING_CLKDISABLECYCLES_LSB),
+	.dram_odt =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ <<
+			SDR_CTRLGRP_DRAMODT_READ_LSB)			|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE <<
+			SDR_CTRLGRP_DRAMODT_WRITE_LSB),
+#if (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE == 2)	/* DDR3 */
+	.extratime1 =
+		(CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR <<
+				SDR_CTRLGRP_EXTRATIME1_RD_TO_WR_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_BC <<
+				SDR_CTRLGRP_EXTRATIME1_RD_TO_WR_BC_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_DIFF_CHIP <<
+				SDR_CTRLGRP_EXTRATIME1_RD_TO_WR_DIFF_LSB),
+#endif
+	.dram_addrw =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS <<
+			SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS <<
+			SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS <<
+			SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB)		|
+		((CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS - 1) <<
+			SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB),
+	.dram_if_width =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH <<
+			SDR_CTRLGRP_DRAMIFWIDTH_IFWIDTH_LSB),
+	.dram_dev_width =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH <<
+			SDR_CTRLGRP_DRAMDEVWIDTH_DEVWIDTH_LSB),
+	.dram_intr =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN <<
+			SDR_CTRLGRP_DRAMINTR_INTREN_LSB),
+	.lowpwr_eq =
+		(CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK <<
+			SDR_CTRLGRP_LOWPWREQ_SELFRFSHMASK_LSB),
+	.static_cfg =
+		(CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL <<
+			SDR_CTRLGRP_STATICCFG_MEMBL_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA <<
+			SDR_CTRLGRP_STATICCFG_USEECCASDATA_LSB),
+	.ctrl_width =
+		(CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH <<
+			SDR_CTRLGRP_CTRLWIDTH_CTRLWIDTH_LSB),
+	.cport_width =
+		(CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH <<
+			SDR_CTRLGRP_CPORTWIDTH_CMDPORTWIDTH_LSB),
+	.cport_wmap =
+		(CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP <<
+			SDR_CTRLGRP_CPORTWMAP_CPORTWFIFOMAP_LSB),
+	.cport_rmap =
+		(CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP <<
+			SDR_CTRLGRP_CPORTRMAP_CPORTRFIFOMAP_LSB),
+	.rfifo_cmap =
+		(CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP <<
+			SDR_CTRLGRP_RFIFOCMAP_RFIFOCPORTMAP_LSB),
+	.wfifo_cmap =
+		(CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP <<
+			SDR_CTRLGRP_WFIFOCMAP_WFIFOCPORTMAP_LSB),
+	.cport_rdwr =
+		(CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR <<
+			SDR_CTRLGRP_CPORTRDWR_CPORTRDWR_LSB),
+	.port_cfg =
+		(CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN <<
+			SDR_CTRLGRP_PORTCFG_AUTOPCHEN_LSB),
+	.fpgaport_rst = CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST,
+	.fifo_cfg =
+		(CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE <<
+			SDR_CTRLGRP_FIFOCFG_SYNCMODE_LSB)		|
+		(CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC <<
+			SDR_CTRLGRP_FIFOCFG_INCSYNC_LSB),
+	.mp_priority =
+		(CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY <<
+			SDR_CTRLGRP_MPPRIORITY_USERPRIORITY_LSB),
+	.mp_weight0 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0 <<
+			SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_0_STATICWEIGHT_31_0_LSB),
+	.mp_weight1 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32 <<
+			SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_STATICWEIGHT_49_32_LSB) |
+		(CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0 <<
+			SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_SUMOFWEIGHTS_13_0_LSB),
+	.mp_weight2 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14 <<
+			SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_2_SUMOFWEIGHTS_45_14_LSB),
+	.mp_weight3 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46 <<
+			SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_3_SUMOFWEIGHTS_63_46_LSB),
+	.mp_pacing0 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0 <<
+			SDR_CTRLGRP_MPPACING_MPPACING_0_THRESHOLD1_31_0_LSB),
+	.mp_pacing1 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32 <<
+			SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD1_59_32_LSB) |
+		(CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 <<
+			SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD2_3_0_LSB),
+	.mp_pacing2 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 <<
+			SDR_CTRLGRP_MPPACING_MPPACING_2_THRESHOLD2_35_4_LSB),
+	.mp_pacing3 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 <<
+			SDR_CTRLGRP_MPPACING_MPPACING_3_THRESHOLD2_59_36_LSB),
+	.mp_threshold0 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 <<
+			SDR_CTRLGRP_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0_LSB),
+	.mp_threshold1 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 <<
+			SDR_CTRLGRP_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32_LSB),
+	.mp_threshold2 =
+		(CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 <<
+			SDR_CTRLGRP_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64_LSB),
+	.phy_ctrl0 = CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0,
+};
+
+static const struct socfpga_sdram_rw_mgr_config rw_mgr_config = {
+	.activate_0_and_1		= RW_MGR_ACTIVATE_0_AND_1,
+	.activate_0_and_1_wait1		= RW_MGR_ACTIVATE_0_AND_1_WAIT1,
+	.activate_0_and_1_wait2		= RW_MGR_ACTIVATE_0_AND_1_WAIT2,
+	.clear_dqs_enable		= RW_MGR_CLEAR_DQS_ENABLE,
+	.guaranteed_read		= RW_MGR_GUARANTEED_READ,
+	.guaranteed_read_cont		= RW_MGR_GUARANTEED_READ_CONT,
+	.guaranteed_write		= RW_MGR_GUARANTEED_WRITE,
+	.guaranteed_write_wait0		= RW_MGR_GUARANTEED_WRITE_WAIT0,
+	.guaranteed_write_wait1		= RW_MGR_GUARANTEED_WRITE_WAIT1,
+	.guaranteed_write_wait2		= RW_MGR_GUARANTEED_WRITE_WAIT2,
+	.guaranteed_write_wait3		= RW_MGR_GUARANTEED_WRITE_WAIT3,
+	.idle_loop1			= RW_MGR_IDLE_LOOP1,
+	.idle_loop2			= RW_MGR_IDLE_LOOP2,
+#if (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE == 1)	/* DDR2 */
+	.emr				= RW_MGR_EMR,
+	.emr2				= RW_MGR_EMR2,
+	.emr3				= RW_MGR_EMR3,
+	.init_reset_0_cke_0		= RW_MGR_INIT_CKE_0,
+	.nop				= RW_MGR_NOP,
+	.refresh			= RW_MGR_REFRESH,
+	.mr_calib			= RW_MGR_MR_CALIB,
+	.mr_user			= RW_MGR_MR_USER,
+	.mr_dll_reset			= RW_MGR_MR_DLL_RESET,
+	.emr_ocd_enable			= RW_MGR_EMR_OCD_ENABLE,
+#elif (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE == 2)	/* DDR3 */
+	.activate_1			= RW_MGR_ACTIVATE_1,
+	.idle				= RW_MGR_IDLE,
+	.init_reset_0_cke_0		= RW_MGR_INIT_RESET_0_CKE_0,
+	.init_reset_1_cke_0		= RW_MGR_INIT_RESET_1_CKE_0,
+	.mrs1				= RW_MGR_MRS1,
+	.mrs1_mirr			= RW_MGR_MRS1_MIRR,
+	.mrs2				= RW_MGR_MRS2,
+	.mrs2_mirr			= RW_MGR_MRS2_MIRR,
+	.mrs3				= RW_MGR_MRS3,
+	.mrs3_mirr			= RW_MGR_MRS3_MIRR,
+	.refresh_all			= RW_MGR_REFRESH_ALL,
+	.rreturn			= RW_MGR_RETURN,
+	.sgle_read			= RW_MGR_SGLE_READ,
+	.zqcl				= RW_MGR_ZQCL,
+	.mrs0_dll_reset			= RW_MGR_MRS0_DLL_RESET,
+	.mrs0_dll_reset_mirr		= RW_MGR_MRS0_DLL_RESET_MIRR,
+	.mrs0_user			= RW_MGR_MRS0_USER,
+	.mrs0_user_mirr			= RW_MGR_MRS0_USER_MIRR,
+#else
+#error LPDDR2 and other DRAM types are not yet supported
+#endif
+	.lfsr_wr_rd_bank_0		= RW_MGR_LFSR_WR_RD_BANK_0,
+	.lfsr_wr_rd_bank_0_data		= RW_MGR_LFSR_WR_RD_BANK_0_DATA,
+	.lfsr_wr_rd_bank_0_dqs		= RW_MGR_LFSR_WR_RD_BANK_0_DQS,
+	.lfsr_wr_rd_bank_0_nop		= RW_MGR_LFSR_WR_RD_BANK_0_NOP,
+	.lfsr_wr_rd_bank_0_wait		= RW_MGR_LFSR_WR_RD_BANK_0_WAIT,
+	.lfsr_wr_rd_bank_0_wl_1		= RW_MGR_LFSR_WR_RD_BANK_0_WL_1,
+	.lfsr_wr_rd_dm_bank_0		= RW_MGR_LFSR_WR_RD_DM_BANK_0,
+	.lfsr_wr_rd_dm_bank_0_data	= RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA,
+	.lfsr_wr_rd_dm_bank_0_dqs	= RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS,
+	.lfsr_wr_rd_dm_bank_0_nop	= RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP,
+	.lfsr_wr_rd_dm_bank_0_wait	= RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT,
+	.lfsr_wr_rd_dm_bank_0_wl_1	= RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1,
+	.precharge_all			= RW_MGR_PRECHARGE_ALL,
+	.read_b2b			= RW_MGR_READ_B2B,
+	.read_b2b_wait1			= RW_MGR_READ_B2B_WAIT1,
+	.read_b2b_wait2			= RW_MGR_READ_B2B_WAIT2,
+
+	.true_mem_data_mask_width	= RW_MGR_TRUE_MEM_DATA_MASK_WIDTH,
+	.mem_address_mirroring		= RW_MGR_MEM_ADDRESS_MIRRORING,
+	.mem_data_mask_width		= RW_MGR_MEM_DATA_MASK_WIDTH,
+	.mem_data_width			= RW_MGR_MEM_DATA_WIDTH,
+	.mem_dq_per_read_dqs		= RW_MGR_MEM_DQ_PER_READ_DQS,
+	.mem_dq_per_write_dqs		= RW_MGR_MEM_DQ_PER_WRITE_DQS,
+	.mem_if_read_dqs_width		= RW_MGR_MEM_IF_READ_DQS_WIDTH,
+	.mem_if_write_dqs_width		= RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
+	.mem_number_of_cs_per_dimm	= RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM,
+	.mem_number_of_ranks		= RW_MGR_MEM_NUMBER_OF_RANKS,
+	.mem_virtual_groups_per_read_dqs =
+		RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS,
+	.mem_virtual_groups_per_write_dqs =
+		RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS,
+};
+
+static const struct socfpga_sdram_io_config io_config = {
+	.delay_per_dchain_tap		= IO_DELAY_PER_DCHAIN_TAP,
+	.delay_per_dqs_en_dchain_tap	= IO_DELAY_PER_DQS_EN_DCHAIN_TAP,
+	.delay_per_opa_tap		= IO_DELAY_PER_OPA_TAP,
+	.dll_chain_length		= IO_DLL_CHAIN_LENGTH,
+	.dqdqs_out_phase_max		= IO_DQDQS_OUT_PHASE_MAX,
+	.dqs_en_delay_max		= IO_DQS_EN_DELAY_MAX,
+	.dqs_en_delay_offset		= IO_DQS_EN_DELAY_OFFSET,
+	.dqs_en_phase_max		= IO_DQS_EN_PHASE_MAX,
+	.dqs_in_delay_max		= IO_DQS_IN_DELAY_MAX,
+	.dqs_in_reserve			= IO_DQS_IN_RESERVE,
+	.dqs_out_reserve		= IO_DQS_OUT_RESERVE,
+	.io_in_delay_max		= IO_IO_IN_DELAY_MAX,
+	.io_out1_delay_max		= IO_IO_OUT1_DELAY_MAX,
+	.io_out2_delay_max		= IO_IO_OUT2_DELAY_MAX,
+	.shift_dqs_en_when_shift_dqs	= IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS,
+};
+
+static const struct socfpga_sdram_misc_config misc_config = {
+#if (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE == 1)	/* DDR2 */
+	.afi_clk_freq			= AFI_CLK_FREQ,
+#endif
+	.afi_rate_ratio			= AFI_RATE_RATIO,
+	.calib_lfifo_offset		= CALIB_LFIFO_OFFSET,
+	.calib_vfifo_offset		= CALIB_VFIFO_OFFSET,
+	.enable_super_quick_calibration	= ENABLE_SUPER_QUICK_CALIBRATION,
+	.max_latency_count_width	= MAX_LATENCY_COUNT_WIDTH,
+	.read_valid_fifo_size		= READ_VALID_FIFO_SIZE,
+	.reg_file_init_seq_signature	= REG_FILE_INIT_SEQ_SIGNATURE,
+	.tinit_cntr0_val		= TINIT_CNTR0_VAL,
+	.tinit_cntr1_val		= TINIT_CNTR1_VAL,
+	.tinit_cntr2_val		= TINIT_CNTR2_VAL,
+	.treset_cntr0_val		= TRESET_CNTR0_VAL,
+	.treset_cntr1_val		= TRESET_CNTR1_VAL,
+	.treset_cntr2_val		= TRESET_CNTR2_VAL,
+};
+
+const struct socfpga_sdram_config *socfpga_get_sdram_config(void)
+{
+	return &sdram_config;
+}
+
+void socfpga_get_seq_ac_init(const u32 **init, unsigned int *nelem)
+{
+	*init = ac_rom_init;
+	*nelem = ARRAY_SIZE(ac_rom_init);
+}
+
+void socfpga_get_seq_inst_init(const u32 **init, unsigned int *nelem)
+{
+	*init = inst_rom_init;
+	*nelem = ARRAY_SIZE(inst_rom_init);
+}
+
+const struct socfpga_sdram_rw_mgr_config *socfpga_get_sdram_rwmgr_config(void)
+{
+	return &rw_mgr_config;
+}
+
+const struct socfpga_sdram_io_config *socfpga_get_sdram_io_config(void)
+{
+	return &io_config;
+}
+
+const struct socfpga_sdram_misc_config *socfpga_get_sdram_misc_config(void)
+{
+	return &misc_config;
+}
diff --git a/roms/u-boot/arch/arm/mach-sti/Kconfig b/roms/u-boot/arch/arm/mach-sti/Kconfig
new file mode 100644
index 000000000..f9a583af8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sti/Kconfig
@@ -0,0 +1,31 @@
+if ARCH_STI
+
+config SYS_SOC
+	default "stih410"
+
+choice
+	prompt "STiH410 board select"
+
+config TARGET_STIH410_B2260
+	bool "96Boards STiH410-B2260"
+	help
+	  Support for 96Board STiH410-B2260 based on STMicrolectronics
+	  STiH410 soc. This board complies with 96Board Open Platform
+	  Specifications. Features:
+	  - 1GB DDR
+	  - On-Board USB combo WiFi/Bluetooth RTL8723BU
+	    with PCB soldered antenna
+	  - Ethernet 1000-BaseT
+	  - Sata
+	  - HDMI
+	  - 2 x USB2 type A
+	  - micro USB2 type AB
+	  - SD card slot
+	  - High speed connector (SD/I2C/USB interfaces)
+	  - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
+
+endchoice
+
+source "board/st/stih410-b2260/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-stm32/Kconfig b/roms/u-boot/arch/arm/mach-stm32/Kconfig
new file mode 100644
index 000000000..b42b05669
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32/Kconfig
@@ -0,0 +1,79 @@
+if ARCH_STM32
+
+config STM32F4
+	bool "stm32f4 family"
+	select CLK
+	select DM_GPIO
+	select DM_RESET
+	select MISC
+	select PINCTRL
+	select PINCTRL_STM32
+	select RAM
+	select STM32_RCC
+	select STM32_RESET
+	select STM32_SDRAM
+	select STM32_SERIAL
+	select STM32_TIMER
+	select TIMER
+
+config STM32F7
+	bool "stm32f7 family"
+	select CLK
+	select DM_GPIO
+	select DM_RESET
+	select MISC
+	select PINCTRL
+	select PINCTRL_STM32
+	select RAM
+	select SPL
+	select SPL_BOARD_INIT
+	select SPL_CLK
+	select SPL_DM
+	select SPL_DM_RESET
+	select SPL_DM_SEQ_ALIAS
+	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_GPIO_SUPPORT
+	select SPL_LIBCOMMON_SUPPORT
+	select SPL_LIBGENERIC_SUPPORT
+	select SPL_MTD_SUPPORT
+	select SPL_OF_CONTROL
+	select SPL_OF_LIBFDT
+	select SPL_OF_TRANSLATE
+	select SPL_PINCTRL
+	select SPL_RAM
+	select SPL_SERIAL_SUPPORT
+	select SPL_SYS_MALLOC_SIMPLE
+	select SPL_TIMER
+	select SPL_XIP_SUPPORT
+	select STM32_RCC
+	select STM32_RESET
+	select STM32_SDRAM
+	select STM32_SERIAL
+	select STM32_TIMER
+	select SUPPORT_SPL
+	select TIMER
+	imply SPL_OS_BOOT
+
+config STM32H7
+	bool "stm32h7 family"
+	select CLK
+	select DM_GPIO
+	select DM_RESET
+	select MISC
+	select PINCTRL
+	select PINCTRL_STM32
+	select RAM
+	select REGMAP
+	select STM32_RCC
+	select STM32_RESET
+	select STM32_SDRAM
+	select STM32_SERIAL
+	select STM32_TIMER
+	select SYSCON
+	select TIMER
+
+source "arch/arm/mach-stm32/stm32f4/Kconfig"
+source "arch/arm/mach-stm32/stm32f7/Kconfig"
+source "arch/arm/mach-stm32/stm32h7/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-stm32/Makefile b/roms/u-boot/arch/arm/mach-stm32/Makefile
new file mode 100644
index 000000000..03d535d81
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+obj-y += soc.o
diff --git a/roms/u-boot/arch/arm/mach-stm32/soc.c b/roms/u-boot/arch/arm/mach-stm32/soc.c
new file mode 100644
index 000000000..0bd8d7b22
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32/soc.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/armv7_mpu.h>
+
+int arch_cpu_init(void)
+{
+	int i;
+
+	struct mpu_region_config stm32_region_config[] = {
+		/*
+		 * Make SDRAM area cacheable & executable.
+		 */
+#if defined(CONFIG_STM32F4)
+		{ 0x00000000, REGION_0, XN_DIS, PRIV_RW_USR_RW,
+		O_I_WB_RD_WR_ALLOC, REGION_512MB },
+#endif
+
+		{ 0x90000000, REGION_1, XN_DIS, PRIV_RW_USR_RW,
+		SHARED_WRITE_BUFFERED, REGION_256MB },
+
+#if defined(CONFIG_STM32F7) || defined(CONFIG_STM32H7)
+		{ 0xC0000000, REGION_0, XN_DIS, PRIV_RW_USR_RW,
+		O_I_WB_RD_WR_ALLOC, REGION_512MB },
+#endif
+	};
+
+	disable_mpu();
+	for (i = 0; i < ARRAY_SIZE(stm32_region_config); i++)
+		mpu_config(&stm32_region_config[i]);
+	enable_mpu();
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32/stm32f4/Kconfig b/roms/u-boot/arch/arm/mach-stm32/stm32f4/Kconfig
new file mode 100644
index 000000000..e8fae4de4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32/stm32f4/Kconfig
@@ -0,0 +1,16 @@
+if STM32F4
+
+config TARGET_STM32F429_DISCOVERY
+	bool "STM32F429 Discovery board"
+
+config TARGET_STM32F429_EVALUATION
+	bool "STM32F429 Evaluation board"
+
+config TARGET_STM32F469_DISCOVERY
+	bool "STM32F469 Discovery board"
+
+source "board/st/stm32f429-discovery/Kconfig"
+source "board/st/stm32f429-evaluation/Kconfig"
+source "board/st/stm32f469-discovery/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-stm32/stm32f7/Kconfig b/roms/u-boot/arch/arm/mach-stm32/stm32f7/Kconfig
new file mode 100644
index 000000000..287e5ad4a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32/stm32f7/Kconfig
@@ -0,0 +1,8 @@
+if STM32F7
+
+config TARGET_STM32F746_DISCO
+	bool "STM32F746 Discovery board"
+
+source "board/st/stm32f746-disco/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-stm32/stm32h7/Kconfig b/roms/u-boot/arch/arm/mach-stm32/stm32h7/Kconfig
new file mode 100644
index 000000000..70233a4b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32/stm32h7/Kconfig
@@ -0,0 +1,16 @@
+if STM32H7
+
+config TARGET_STM32H743_DISCO
+	bool "STM32H743 Discovery board"
+
+config TARGET_STM32H743_EVAL
+	bool "STM32H743 Evaluation board"
+
+config TARGET_STM32H750_ART_PI
+	bool "STM32H750 ART Pi board"
+
+source "board/st/stm32h743-eval/Kconfig"
+source "board/st/stm32h743-disco/Kconfig"
+source "board/st/stm32h750-art-pi/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/Kconfig b/roms/u-boot/arch/arm/mach-stm32mp/Kconfig
new file mode 100644
index 000000000..7c25266f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/Kconfig
@@ -0,0 +1,219 @@
+if ARCH_STM32MP
+
+config SPL
+	select SPL_BOARD_INIT
+	select SPL_CLK
+	select SPL_DM
+	select SPL_DM_SEQ_ALIAS
+	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_FRAMEWORK
+	select SPL_GPIO_SUPPORT
+	select SPL_LIBCOMMON_SUPPORT
+	select SPL_LIBGENERIC_SUPPORT
+	select SPL_OF_CONTROL
+	select SPL_OF_TRANSLATE
+	select SPL_PINCTRL
+	select SPL_REGMAP
+	select SPL_DM_RESET
+	select SPL_SERIAL_SUPPORT
+	select SPL_SYSCON
+	select SPL_WATCHDOG_SUPPORT if WATCHDOG
+	imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
+	imply SPL_BOOTSTAGE if BOOTSTAGE
+	imply SPL_DISPLAY_PRINT
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_SPI_LOAD if SPL_SPI_SUPPORT
+
+config SYS_SOC
+	default "stm32mp"
+
+config SYS_MALLOC_LEN
+	default 0x2000000
+
+config ENV_SIZE
+	default 0x2000
+
+config STM32MP15x
+	bool "Support STMicroelectronics STM32MP15x Soc"
+	select ARCH_SUPPORT_PSCI if !TFABOOT
+	select ARM_SMCCC if TFABOOT
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC if !TFABOOT
+	select CPU_V7_HAS_VIRT
+	select OF_BOARD_SETUP
+	select PINCTRL_STM32
+	select STM32_RCC
+	select STM32_RESET
+	select STM32_SERIAL
+	select SYS_ARCH_TIMER
+	imply CMD_NVEDIT_INFO
+	imply SYSRESET_PSCI if TFABOOT
+	imply SYSRESET_SYSCON if !TFABOOT
+	help
+		support of STMicroelectronics SOC STM32MP15x family
+		STM32MP157, STM32MP153 or STM32MP151
+		STMicroelectronics MPU with core ARMv7
+		dual core A7 for STM32MP157/3, monocore for STM32MP151
+		target all the STMicroelectronics board with SOC STM32MP1 family
+
+choice
+	prompt "STM32MP15x board select"
+	optional
+
+config TARGET_ST_STM32MP15x
+	bool "STMicroelectronics STM32MP15x boards"
+	select STM32MP15x
+	imply BOOTCOUNT_LIMIT
+	imply BOOTSTAGE
+	imply CMD_BOOTCOUNT
+	imply CMD_BOOTSTAGE
+	imply CMD_CLS if CMD_BMP
+	imply DISABLE_CONSOLE
+	imply PRE_CONSOLE_BUFFER
+	imply SILENT_CONSOLE
+	help
+		target the STMicroelectronics board with SOC STM32MP15x
+		managed by board/st/stm32mp1:
+		Evalulation board (EV1) or Discovery board (DK1 and DK2).
+		The difference between board are managed with devicetree
+
+config TARGET_MICROGEA_STM32MP1
+	bool "Engicam MicroGEA STM32MP1 SOM"
+	select STM32MP15x
+	imply BOOTCOUNT_LIMIT
+	imply BOOTSTAGE
+	imply CMD_BOOTCOUNT
+	imply CMD_BOOTSTAGE
+	imply CMD_CLS if CMD_BMP
+	imply DISABLE_CONSOLE
+	imply PRE_CONSOLE_BUFFER
+	imply SILENT_CONSOLE
+	help
+	  MicroGEA STM32MP1 is a STM32MP157A based Micro SOM.
+
+	  MicroGEA STM32MP1 MicroDev 2.0:
+	  * MicroDev 2.0 is a general purpose miniature carrier board with CAN,
+	    LTE and LVDS panel interfaces.
+	  * MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
+	    for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
+
+	  MicroGEA STM32MP1 MicroDev 2.0 7" OF:
+	  * 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
+	    panel and toucscreen.
+	  * MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
+	    pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
+	    Open Frame Solution board.
+
+config TARGET_ICORE_STM32MP1
+	bool "Engicam i.Core STM32MP1 SOM"
+	select STM32MP15x
+	imply BOOTCOUNT_LIMIT
+	imply BOOTSTAGE
+	imply CMD_BOOTCOUNT
+	imply CMD_BOOTSTAGE
+	imply CMD_CLS if CMD_BMP
+	imply DISABLE_CONSOLE
+	imply PRE_CONSOLE_BUFFER
+	imply SILENT_CONSOLE
+	help
+	  i.Core STM32MP1 is an EDIMM SOM based on STM32MP157A.
+
+	  i.Core STM32MP1 EDIMM2.2:
+	  * EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
+	  * i.Core STM32MP1 needs to mount on top of EDIMM2.2 for
+	    creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
+
+	  i.Core STM32MP1 C.TOUCH 2.0
+	  * C.TOUCH 2.0 is a general purpose Carrier board.
+	  * i.Core STM32MP1 needs to mount on top of this Carrier board
+	    for creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
+
+config TARGET_DH_STM32MP1_PDK2
+	bool "DH STM32MP1 PDK2"
+	select STM32MP15x
+	imply BOOTCOUNT_LIMIT
+	imply CMD_BOOTCOUNT
+	help
+		Target the DH PDK2 development kit with STM32MP15x SoM.
+
+endchoice
+
+config SYS_TEXT_BASE
+	default 0xC0100000
+
+config NR_DRAM_BANKS
+	default 1
+
+config DDR_CACHEABLE_SIZE
+	hex "Size of the DDR marked cacheable in pre-reloc stage"
+	default 0x10000000 if TFABOOT
+	default 0x40000000
+	help
+		Define the size of the DDR marked as cacheable in U-Boot
+		pre-reloc stage.
+		This option can be useful to avoid speculatif access
+		to secured area of DDR used by TF-A or OP-TEE before U-Boot
+		initialization.
+		The areas marked "no-map" in device tree should be located
+		before this limit: STM32_DDR_BASE + DDR_CACHEABLE_SIZE.
+
+config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
+	hex "Partition on MMC2 to use to load U-Boot from"
+	depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+	default 1
+	help
+	  Partition on the second MMC to load U-Boot from when the MMC is being
+	  used in raw mode
+
+config STM32_ETZPC
+	bool "STM32 Extended TrustZone Protection"
+	depends on STM32MP15x
+	default y
+	help
+	  Say y to enable STM32 Extended TrustZone Protection
+
+config CMD_STM32KEY
+	bool "command stm32key to fuse public key hash"
+	default y
+	help
+		fuse public key hash in corresponding fuse used to authenticate
+		binary.
+
+config PRE_CON_BUF_ADDR
+	default 0xC02FF000
+
+config PRE_CON_BUF_SZ
+	default 4096
+
+config BOOTSTAGE_STASH_ADDR
+	default 0xC3000000
+
+if BOOTCOUNT_LIMIT
+config SYS_BOOTCOUNT_SINGLEWORD
+	default y
+
+# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
+config SYS_BOOTCOUNT_ADDR
+	default 0x5C00A154
+endif
+
+if DEBUG_UART
+
+config DEBUG_UART_BOARD_INIT
+	default y
+
+# debug on UART4 by default
+config DEBUG_UART_BASE
+	default 0x40010000
+
+# clock source is HSI on reset
+config DEBUG_UART_CLOCK
+	default 64000000
+endif
+
+source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
+source "board/dhelectronics/dh_stm32mp1/Kconfig"
+source "board/engicam/stm32mp1/Kconfig"
+source "board/st/stm32mp1/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/Makefile b/roms/u-boot/arch/arm/mach-stm32mp/Makefile
new file mode 100644
index 000000000..aa3986708
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/Makefile
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+#
+
+obj-y += cpu.o
+obj-y += dram_init.o
+obj-y += syscon.o
+obj-y += bsec.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+else
+obj-y += cmd_stm32prog/
+obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o
+obj-$(CONFIG_ARMV7_PSCI) += psci.o
+obj-$(CONFIG_TFABOOT) += boot_params.o
+endif
+
+obj-$(CONFIG_$(SPL_)DM_REGULATOR) += pwr_regulator.o
+obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/boot_params.c b/roms/u-boot/arch/arm/mach-stm32mp/boot_params.c
new file mode 100644
index 000000000..84647e703
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/boot_params.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY LOGC_ARCH
+
+#include <common.h>
+#include <log.h>
+#include <linux/libfdt.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+
+/*
+ * Force data-section, as .bss will not be valid
+ * when save_boot_params is invoked.
+ */
+static unsigned long nt_fw_dtb __section(".data");
+
+/*
+ * Save the FDT address provided by TF-A in r2 at boot time
+ * This function is called from start.S
+ */
+void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,
+		      unsigned long r3)
+{
+	nt_fw_dtb = r2;
+
+	save_boot_params_ret();
+}
+
+/*
+ * Use the saved FDT address provided by TF-A at boot time (NT_FW_CONFIG =
+ * Non Trusted Firmware configuration file) when the pointer is valid
+ */
+void *board_fdt_blob_setup(void)
+{
+	log_debug("%s: nt_fw_dtb=%lx\n", __func__, nt_fw_dtb);
+
+	/* use external device tree only if address is valid */
+	if (nt_fw_dtb >= STM32_DDR_BASE) {
+		if (fdt_magic(nt_fw_dtb) == FDT_MAGIC)
+			return (void *)nt_fw_dtb;
+		log_debug("%s: DTB not found.\n", __func__);
+	}
+	log_debug("%s: fall back to builtin DTB, %p\n", __func__, &_end);
+
+	return (void *)&_end;
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/bsec.c b/roms/u-boot/arch/arm/mach-stm32mp/bsec.c
new file mode 100644
index 000000000..fe39bd80c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/bsec.c
@@ -0,0 +1,553 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY UCLASS_MISC
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <log.h>
+#include <misc.h>
+#include <asm/io.h>
+#include <asm/arch/bsec.h>
+#include <asm/arch/stm32mp1_smc.h>
+#include <dm/device_compat.h>
+#include <linux/arm-smccc.h>
+#include <linux/iopoll.h>
+
+#define BSEC_OTP_MAX_VALUE		95
+#define BSEC_TIMEOUT_US			10000
+
+/* BSEC REGISTER OFFSET (base relative) */
+#define BSEC_OTP_CONF_OFF		0x000
+#define BSEC_OTP_CTRL_OFF		0x004
+#define BSEC_OTP_WRDATA_OFF		0x008
+#define BSEC_OTP_STATUS_OFF		0x00C
+#define BSEC_OTP_LOCK_OFF		0x010
+#define BSEC_DENABLE_OFF		0x014
+#define BSEC_DISTURBED_OFF		0x01C
+#define BSEC_ERROR_OFF			0x034
+#define BSEC_WRLOCK_OFF			0x04C /* OTP write permananet lock */
+#define BSEC_SPLOCK_OFF			0x064 /* OTP write sticky lock */
+#define BSEC_SWLOCK_OFF			0x07C /* shadow write sticky lock */
+#define BSEC_SRLOCK_OFF			0x094 /* shadow read sticky lock */
+#define BSEC_OTP_DATA_OFF		0x200
+
+/* BSEC_CONFIGURATION Register MASK */
+#define BSEC_CONF_POWER_UP		0x001
+
+/* BSEC_CONTROL Register */
+#define BSEC_READ			0x000
+#define BSEC_WRITE			0x100
+
+/* LOCK Register */
+#define OTP_LOCK_MASK			0x1F
+#define OTP_LOCK_BANK_SHIFT		0x05
+#define OTP_LOCK_BIT_MASK		0x01
+
+/* STATUS Register */
+#define BSEC_MODE_BUSY_MASK		0x08
+#define BSEC_MODE_PROGFAIL_MASK		0x10
+#define BSEC_MODE_PWR_MASK		0x20
+
+/* DENABLE Register */
+#define BSEC_DENABLE_DBGSWENABLE	BIT(10)
+
+/*
+ * OTP Lock services definition
+ * Value must corresponding to the bit number in the register
+ */
+#define BSEC_LOCK_PROGRAM		0x04
+
+/**
+ * bsec_lock() - manage lock for each type SR/SP/SW
+ * @address: address of bsec IP register
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: true if locked else false
+ */
+static bool bsec_read_lock(u32 address, u32 otp)
+{
+	u32 bit;
+	u32 bank;
+
+	bit = 1 << (otp & OTP_LOCK_MASK);
+	bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);
+
+	return !!(readl(address + bank) & bit);
+}
+
+/**
+ * bsec_check_error() - Check status of one otp
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: 0 if no error, -EAGAIN or -ENOTSUPP
+ */
+static u32 bsec_check_error(u32 base, u32 otp)
+{
+	u32 bit;
+	u32 bank;
+
+	bit = 1 << (otp & OTP_LOCK_MASK);
+	bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);
+
+	if (readl(base + BSEC_DISTURBED_OFF + bank) & bit)
+		return -EAGAIN;
+	else if (readl(base + BSEC_ERROR_OFF + bank) & bit)
+		return -ENOTSUPP;
+
+	return 0;
+}
+
+/**
+ * bsec_read_SR_lock() - read SR lock (Shadowing)
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: true if locked else false
+ */
+static bool bsec_read_SR_lock(u32 base, u32 otp)
+{
+	return bsec_read_lock(base + BSEC_SRLOCK_OFF, otp);
+}
+
+/**
+ * bsec_read_SP_lock() - read SP lock (program Lock)
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: true if locked else false
+ */
+static bool bsec_read_SP_lock(u32 base, u32 otp)
+{
+	return bsec_read_lock(base + BSEC_SPLOCK_OFF, otp);
+}
+
+/**
+ * bsec_SW_lock() - manage SW lock (Write in Shadow)
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: true if locked else false
+ */
+static bool bsec_read_SW_lock(u32 base, u32 otp)
+{
+	return bsec_read_lock(base + BSEC_SWLOCK_OFF, otp);
+}
+
+/**
+ * bsec_power_safmem() - Activate or deactivate safmem power
+ * @base: base address of bsec IP
+ * @power: true to power up , false to power down
+ * Return: 0 if succeed
+ */
+static int bsec_power_safmem(u32 base, bool power)
+{
+	u32 val;
+	u32 mask;
+
+	if (power) {
+		setbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
+		mask = BSEC_MODE_PWR_MASK;
+	} else {
+		clrbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
+		mask = 0;
+	}
+
+	/* waiting loop */
+	return readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
+				  val, (val & BSEC_MODE_PWR_MASK) == mask,
+				  BSEC_TIMEOUT_US);
+}
+
+/**
+ * bsec_shadow_register() - copy safmen otp to bsec data
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: 0 if no error
+ */
+static int bsec_shadow_register(struct udevice *dev, u32 base, u32 otp)
+{
+	u32 val;
+	int ret;
+	bool power_up = false;
+
+	/* check if shadowing of otp is locked */
+	if (bsec_read_SR_lock(base, otp))
+		dev_dbg(dev, "OTP %d is locked and refreshed with 0\n",
+			otp);
+
+	/* check if safemem is power up */
+	val = readl(base + BSEC_OTP_STATUS_OFF);
+	if (!(val & BSEC_MODE_PWR_MASK)) {
+		ret = bsec_power_safmem(base, true);
+		if (ret)
+			return ret;
+		power_up = true;
+	}
+	/* set BSEC_OTP_CTRL_OFF with the otp value*/
+	writel(otp | BSEC_READ, base + BSEC_OTP_CTRL_OFF);
+
+	/* check otp status*/
+	ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
+				 val, (val & BSEC_MODE_BUSY_MASK) == 0,
+				 BSEC_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	ret = bsec_check_error(base, otp);
+
+	if (power_up)
+		bsec_power_safmem(base, false);
+
+	return ret;
+}
+
+/**
+ * bsec_read_shadow() - read an otp data value from shadow
+ * @base: base address of bsec IP
+ * @val: read value
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: 0 if no error
+ */
+static int bsec_read_shadow(struct udevice *dev, u32 base, u32 *val, u32 otp)
+{
+	*val = readl(base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));
+
+	return bsec_check_error(base, otp);
+}
+
+/**
+ * bsec_write_shadow() - write value in BSEC data register in shadow
+ * @base: base address of bsec IP
+ * @val: value to write
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: 0 if no error
+ */
+static int bsec_write_shadow(struct udevice *dev, u32 base, u32 val, u32 otp)
+{
+	/* check if programming of otp is locked */
+	if (bsec_read_SW_lock(base, otp))
+		dev_dbg(dev, "OTP %d is lock, write will be ignore\n", otp);
+
+	writel(val, base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));
+
+	return bsec_check_error(base, otp);
+}
+
+/**
+ * bsec_program_otp() - program a bit in SAFMEM
+ * @base: base address of bsec IP
+ * @val: value to program
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * after the function the otp data is not refreshed in shadow
+ * Return: 0 if no error
+ */
+static int bsec_program_otp(struct udevice *dev, long base, u32 val, u32 otp)
+{
+	u32 ret;
+	bool power_up = false;
+
+	if (bsec_read_SP_lock(base, otp))
+		dev_dbg(dev, "OTP %d locked, prog will be ignore\n", otp);
+
+	if (readl(base + BSEC_OTP_LOCK_OFF) & (1 << BSEC_LOCK_PROGRAM))
+		dev_dbg(dev, "Global lock, prog will be ignore\n");
+
+	/* check if safemem is power up */
+	if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
+		ret = bsec_power_safmem(base, true);
+		if (ret)
+			return ret;
+
+		power_up = true;
+	}
+	/* set value in write register*/
+	writel(val, base + BSEC_OTP_WRDATA_OFF);
+
+	/* set BSEC_OTP_CTRL_OFF with the otp value */
+	writel(otp | BSEC_WRITE, base + BSEC_OTP_CTRL_OFF);
+
+	/* check otp status*/
+	ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
+				 val, (val & BSEC_MODE_BUSY_MASK) == 0,
+				 BSEC_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	if (val & BSEC_MODE_PROGFAIL_MASK)
+		ret = -EACCES;
+	else
+		ret = bsec_check_error(base, otp);
+
+	if (power_up)
+		bsec_power_safmem(base, false);
+
+	return ret;
+}
+
+/* BSEC MISC driver *******************************************************/
+struct stm32mp_bsec_plat {
+	u32 base;
+};
+
+static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp)
+{
+	struct stm32mp_bsec_plat *plat;
+	u32 tmp_data = 0;
+	int ret;
+
+	if (IS_ENABLED(CONFIG_TFABOOT))
+		return stm32_smc(STM32_SMC_BSEC,
+				 STM32_SMC_READ_OTP,
+				 otp, 0, val);
+
+	plat = dev_get_plat(dev);
+
+	/* read current shadow value */
+	ret = bsec_read_shadow(dev, plat->base, &tmp_data, otp);
+	if (ret)
+		return ret;
+
+	/* copy otp in shadow */
+	ret = bsec_shadow_register(dev, plat->base, otp);
+	if (ret)
+		return ret;
+
+	ret = bsec_read_shadow(dev, plat->base, val, otp);
+	if (ret)
+		return ret;
+
+	/* restore shadow value */
+	ret = bsec_write_shadow(dev, plat->base, tmp_data, otp);
+
+	return ret;
+}
+
+static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp)
+{
+	struct stm32mp_bsec_plat *plat;
+
+	if (IS_ENABLED(CONFIG_TFABOOT))
+		return stm32_smc(STM32_SMC_BSEC,
+				 STM32_SMC_READ_SHADOW,
+				 otp, 0, val);
+
+	plat = dev_get_plat(dev);
+
+	return bsec_read_shadow(dev, plat->base, val, otp);
+}
+
+static int stm32mp_bsec_read_lock(struct udevice *dev, u32 *val, u32 otp)
+{
+	struct stm32mp_bsec_plat *plat = dev_get_plat(dev);
+
+	/* return OTP permanent write lock status */
+	*val = bsec_read_lock(plat->base + BSEC_WRLOCK_OFF, otp);
+
+	return 0;
+}
+
+static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp)
+{
+	struct stm32mp_bsec_plat *plat;
+
+	if (IS_ENABLED(CONFIG_TFABOOT))
+		return stm32_smc_exec(STM32_SMC_BSEC,
+				      STM32_SMC_PROG_OTP,
+				      otp, val);
+
+	plat = dev_get_plat(dev);
+
+	return bsec_program_otp(dev, plat->base, val, otp);
+
+}
+
+static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp)
+{
+	struct stm32mp_bsec_plat *plat;
+
+	if (IS_ENABLED(CONFIG_TFABOOT))
+		return stm32_smc_exec(STM32_SMC_BSEC,
+				      STM32_SMC_WRITE_SHADOW,
+				      otp, val);
+
+	plat = dev_get_plat(dev);
+
+	return bsec_write_shadow(dev, plat->base, val, otp);
+}
+
+static int stm32mp_bsec_write_lock(struct udevice *dev, u32 val, u32 otp)
+{
+	if (!IS_ENABLED(CONFIG_TFABOOT))
+		return -ENOTSUPP;
+
+	if (val == 1)
+		return stm32_smc_exec(STM32_SMC_BSEC,
+				      STM32_SMC_WRLOCK_OTP,
+				      otp, 0);
+	if (val == 0)
+		return 0; /* nothing to do */
+
+	return -EINVAL;
+}
+
+static int stm32mp_bsec_read(struct udevice *dev, int offset,
+			     void *buf, int size)
+{
+	int ret;
+	int i;
+	bool shadow = true, lock = false;
+	int nb_otp = size / sizeof(u32);
+	int otp;
+	unsigned int offs = offset;
+
+	if (offs >= STM32_BSEC_LOCK_OFFSET) {
+		offs -= STM32_BSEC_LOCK_OFFSET;
+		lock = true;
+	} else if (offs >= STM32_BSEC_OTP_OFFSET) {
+		offs -= STM32_BSEC_OTP_OFFSET;
+		shadow = false;
+	}
+
+	if ((offs % 4) || (size % 4))
+		return -EINVAL;
+
+	otp = offs / sizeof(u32);
+
+	for (i = otp; i < (otp + nb_otp) && i <= BSEC_OTP_MAX_VALUE; i++) {
+		u32 *addr = &((u32 *)buf)[i - otp];
+
+		if (lock)
+			ret = stm32mp_bsec_read_lock(dev, addr, i);
+		else if (shadow)
+			ret = stm32mp_bsec_read_shadow(dev, addr, i);
+		else
+			ret = stm32mp_bsec_read_otp(dev, addr, i);
+
+		if (ret)
+			break;
+	}
+	if (ret)
+		return ret;
+	else
+		return (i - otp) * 4;
+}
+
+static int stm32mp_bsec_write(struct udevice *dev, int offset,
+			      const void *buf, int size)
+{
+	int ret = 0;
+	int i;
+	bool shadow = true, lock = false;
+	int nb_otp = size / sizeof(u32);
+	int otp;
+	unsigned int offs = offset;
+
+	if (offs >= STM32_BSEC_LOCK_OFFSET) {
+		offs -= STM32_BSEC_LOCK_OFFSET;
+		lock = true;
+	} else if (offs >= STM32_BSEC_OTP_OFFSET) {
+		offs -= STM32_BSEC_OTP_OFFSET;
+		shadow = false;
+	}
+
+	if ((offs % 4) || (size % 4))
+		return -EINVAL;
+
+	otp = offs / sizeof(u32);
+
+	for (i = otp; i < otp + nb_otp && i <= BSEC_OTP_MAX_VALUE; i++) {
+		u32 *val = &((u32 *)buf)[i - otp];
+
+		if (lock)
+			ret = stm32mp_bsec_write_lock(dev, *val, i);
+		else if (shadow)
+			ret = stm32mp_bsec_write_shadow(dev, *val, i);
+		else
+			ret = stm32mp_bsec_write_otp(dev, *val, i);
+		if (ret)
+			break;
+	}
+	if (ret)
+		return ret;
+	else
+		return (i - otp) * 4;
+}
+
+static const struct misc_ops stm32mp_bsec_ops = {
+	.read = stm32mp_bsec_read,
+	.write = stm32mp_bsec_write,
+};
+
+static int stm32mp_bsec_of_to_plat(struct udevice *dev)
+{
+	struct stm32mp_bsec_plat *plat = dev_get_plat(dev);
+
+	plat->base = (u32)dev_read_addr_ptr(dev);
+
+	return 0;
+}
+
+static int stm32mp_bsec_probe(struct udevice *dev)
+{
+	int otp;
+	struct stm32mp_bsec_plat *plat;
+	struct clk_bulk clk_bulk;
+	int ret;
+
+	ret = clk_get_bulk(dev, &clk_bulk);
+	if (!ret) {
+		ret = clk_enable_bulk(&clk_bulk);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * update unlocked shadow for OTP cleared by the rom code
+	 * only executed in U-Boot proper when TF-A is not used
+	 */
+
+	if (!IS_ENABLED(CONFIG_TFABOOT) && !IS_ENABLED(CONFIG_SPL_BUILD)) {
+		plat = dev_get_plat(dev);
+
+		for (otp = 57; otp <= BSEC_OTP_MAX_VALUE; otp++)
+			if (!bsec_read_SR_lock(plat->base, otp))
+				bsec_shadow_register(dev, plat->base, otp);
+	}
+
+	return 0;
+}
+
+static const struct udevice_id stm32mp_bsec_ids[] = {
+	{ .compatible = "st,stm32mp15-bsec" },
+	{}
+};
+
+U_BOOT_DRIVER(stm32mp_bsec) = {
+	.name = "stm32mp_bsec",
+	.id = UCLASS_MISC,
+	.of_match = stm32mp_bsec_ids,
+	.of_to_plat = stm32mp_bsec_of_to_plat,
+	.plat_auto	= sizeof(struct stm32mp_bsec_plat),
+	.ops = &stm32mp_bsec_ops,
+	.probe = stm32mp_bsec_probe,
+};
+
+bool bsec_dbgswenable(void)
+{
+	struct udevice *dev;
+	struct stm32mp_bsec_plat *plat;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(stm32mp_bsec), &dev);
+	if (ret || !dev) {
+		log_debug("bsec driver not available\n");
+		return false;
+	}
+
+	plat = dev_get_plat(dev);
+	if (readl(plat->base + BSEC_DENABLE_OFF) & BSEC_DENABLE_DBGSWENABLE)
+		return true;
+
+	return false;
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32key.c b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32key.c
new file mode 100644
index 000000000..42fdc1123
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32key.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <command.h>
+#include <console.h>
+#include <log.h>
+#include <misc.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+
+#define STM32_OTP_HASH_KEY_START 24
+#define STM32_OTP_HASH_KEY_SIZE 8
+
+static void read_hash_value(u32 addr)
+{
+	int i;
+
+	for (i = 0; i < STM32_OTP_HASH_KEY_SIZE; i++) {
+		printf("OTP value %i: %x\n", STM32_OTP_HASH_KEY_START + i,
+		       __be32_to_cpu(*(u32 *)addr));
+		addr += 4;
+	}
+}
+
+static void fuse_hash_value(u32 addr, bool print)
+{
+	struct udevice *dev;
+	u32 word, val;
+	int i, ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(stm32mp_bsec),
+					  &dev);
+	if (ret) {
+		log_err("Can't find stm32mp_bsec driver\n");
+		return;
+	}
+
+	for (i = 0; i < STM32_OTP_HASH_KEY_SIZE; i++) {
+		if (print)
+			printf("Fuse OTP %i : %x\n",
+			       STM32_OTP_HASH_KEY_START + i,
+			       __be32_to_cpu(*(u32 *)addr));
+
+		word = STM32_OTP_HASH_KEY_START + i;
+		val = __be32_to_cpu(*(u32 *)addr);
+		misc_write(dev, STM32_BSEC_OTP(word), &val, 4);
+
+		addr += 4;
+	}
+}
+
+static int confirm_prog(void)
+{
+	puts("Warning: Programming fuses is an irreversible operation!\n"
+			"         This may brick your system.\n"
+			"         Use this command only if you are sure of what you are doing!\n"
+			"\nReally perform this fuse programming? <y/N>\n");
+
+	if (confirm_yesno())
+		return 1;
+
+	puts("Fuse programming aborted\n");
+	return 0;
+}
+
+static int do_stm32key(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	u32 addr;
+	const char *op = argc >= 2 ? argv[1] : NULL;
+	int confirmed = argc > 3 && !strcmp(argv[2], "-y");
+
+	argc -= 2 + confirmed;
+	argv += 2 + confirmed;
+
+	if (argc < 1)
+		return CMD_RET_USAGE;
+
+	addr = simple_strtoul(argv[0], NULL, 16);
+	if (!addr)
+		return CMD_RET_USAGE;
+
+	if (!strcmp(op, "read"))
+		read_hash_value(addr);
+
+	if (!strcmp(op, "fuse")) {
+		if (!confirmed && !confirm_prog())
+			return CMD_RET_FAILURE;
+		fuse_hash_value(addr, !confirmed);
+	}
+
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(stm32key, 4, 1, do_stm32key,
+	   "Fuse ST Hash key",
+	   "read <addr>: Read the hash store at addr in memory\n"
+	   "stm32key fuse [-y] <addr> : Fuse hash store at addr in otp\n");
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig
new file mode 100644
index 000000000..f4c0d18d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig
@@ -0,0 +1,34 @@
+
+config CMD_STM32PROG
+	bool "command stm32prog for STM32CudeProgrammer"
+	select DFU
+	select DFU_RAM
+	select DFU_VIRT
+	select PARTITION_TYPE_GUID
+	imply CMD_GPT if MMC
+	imply CMD_MTD if MTD
+	imply DFU_MMC if MMC
+	imply DFU_MTD if MTD
+	help
+		activate a specific command stm32prog for STM32MP soc family
+		witch update the device with the tools STM32CubeProgrammer
+		NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
+		    on U-Boot DFU framework
+
+config CMD_STM32PROG_USB
+	bool "support stm32prog over USB"
+	depends on CMD_STM32PROG
+	default y
+	help
+		activate the command "stm32prog usb" for STM32MP soc family
+		witch update the device with the tools STM32CubeProgrammer,
+		using USB with DFU protocol
+
+config CMD_STM32PROG_SERIAL
+	bool "support stm32prog over UART"
+	depends on CMD_STM32PROG
+	default y
+	help
+		activate the command "stm32prog serial" for STM32MP soc family
+		with the tools STM32CubeProgrammer using U-Boot serial device
+		and UART protocol.
\ No newline at end of file
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile
new file mode 100644
index 000000000..b57e1bf87
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+#
+
+obj-$(CONFIG_CMD_STM32PROG) += cmd_stm32prog.o
+obj-$(CONFIG_CMD_STM32PROG) += stm32prog.o
+obj-$(CONFIG_CMD_STM32PROG_SERIAL) += stm32prog_serial.o
+obj-$(CONFIG_CMD_STM32PROG_USB) += stm32prog_usb.o
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
new file mode 100644
index 000000000..e36501a86
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dfu.h>
+#include <image.h>
+#include <asm/arch/stm32prog.h>
+#include "stm32prog.h"
+
+struct stm32prog_data *stm32prog_data;
+
+static void enable_vidconsole(void)
+{
+	char *stdname;
+	char buf[64];
+
+	stdname = env_get("stdout");
+	if (!stdname || !strstr(stdname, "vidconsole")) {
+		if (!stdname)
+			snprintf(buf, sizeof(buf), "serial,vidconsole");
+		else
+			snprintf(buf, sizeof(buf), "%s,vidconsole", stdname);
+		env_set("stdout", buf);
+	}
+
+	stdname = env_get("stderr");
+	if (!stdname || !strstr(stdname, "vidconsole")) {
+		if (!stdname)
+			snprintf(buf, sizeof(buf), "serial,vidconsole");
+		else
+			snprintf(buf, sizeof(buf), "%s,vidconsole", stdname);
+		env_set("stderr", buf);
+	}
+}
+
+static int do_stm32prog(struct cmd_tbl *cmdtp, int flag, int argc,
+			char * const argv[])
+{
+	ulong	addr, size;
+	int dev, ret;
+	enum stm32prog_link_t link = LINK_UNDEFINED;
+	bool reset = false;
+	struct image_header_s header;
+	struct stm32prog_data *data;
+	u32 uimage, dtb;
+
+	if (argc < 3 ||  argc > 5)
+		return CMD_RET_USAGE;
+
+	if (IS_ENABLED(CONFIG_CMD_STM32PROG_USB) && !strcmp(argv[1], "usb"))
+		link = LINK_USB;
+	else if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && !strcmp(argv[1], "serial"))
+		link = LINK_SERIAL;
+
+	if (link == LINK_UNDEFINED) {
+		log_err("not supported link=%s\n", argv[1]);
+		return CMD_RET_USAGE;
+	}
+
+	dev = (int)simple_strtoul(argv[2], NULL, 10);
+
+	addr = STM32_DDR_BASE;
+	size = 0;
+	if (argc > 3) {
+		addr = simple_strtoul(argv[3], NULL, 16);
+		if (!addr)
+			return CMD_RET_FAILURE;
+	}
+	if (argc > 4)
+		size = simple_strtoul(argv[4], NULL, 16);
+
+	/* check STM32IMAGE presence */
+	if (size == 0) {
+		stm32prog_header_check((struct raw_header_s *)addr, &header);
+		if (header.type == HEADER_STM32IMAGE) {
+			size = header.image_length + BL_HEADER_SIZE;
+
+			/* uImage detected in STM32IMAGE, execute the script */
+			if (IMAGE_FORMAT_LEGACY ==
+			    genimg_get_format((void *)(addr + BL_HEADER_SIZE)))
+				return image_source_script(addr + BL_HEADER_SIZE, "script@1");
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_DM_VIDEO))
+		enable_vidconsole();
+
+	data = (struct stm32prog_data *)malloc(sizeof(*data));
+
+	if (!data) {
+		log_err("Alloc failed.");
+		return CMD_RET_FAILURE;
+	}
+	stm32prog_data = data;
+
+	ret = stm32prog_init(data, addr, size);
+	if (ret)
+		printf("Invalid or missing layout file.");
+
+	/* prepare DFU for device read/write */
+	ret = stm32prog_dfu_init(data);
+	if (ret)
+		goto cleanup;
+
+	switch (link) {
+	case LINK_SERIAL:
+		ret = stm32prog_serial_init(data, dev);
+		if (ret)
+			goto cleanup;
+		reset = stm32prog_serial_loop(data);
+		break;
+	case LINK_USB:
+		reset = stm32prog_usb_loop(data, dev);
+		break;
+	default:
+		goto cleanup;
+	}
+
+	uimage = data->uimage;
+	dtb = data->dtb;
+
+	stm32prog_clean(data);
+	free(stm32prog_data);
+	stm32prog_data = NULL;
+
+	puts("Download done\n");
+
+	if (uimage) {
+		char boot_addr_start[20];
+		char dtb_addr[20];
+		char *bootm_argv[5] = {
+			"bootm", boot_addr_start, "-", dtb_addr, NULL
+		};
+		if (!dtb)
+			bootm_argv[3] = env_get("fdtcontroladdr");
+		else
+			snprintf(dtb_addr, sizeof(dtb_addr) - 1,
+				 "0x%x", dtb);
+
+		snprintf(boot_addr_start, sizeof(boot_addr_start) - 1,
+			 "0x%x", uimage);
+		printf("Booting kernel at %s - %s...\n\n\n",
+		       boot_addr_start, bootm_argv[3]);
+		/* Try bootm for legacy and FIT format image */
+		if (genimg_get_format((void *)uimage) != IMAGE_FORMAT_INVALID)
+			do_bootm(cmdtp, 0, 4, bootm_argv);
+		else if (CONFIG_IS_ENABLED(CMD_BOOTZ))
+			do_bootz(cmdtp, 0, 4, bootm_argv);
+	}
+
+	if (reset) {
+		puts("Reset...\n");
+		run_command("reset", 0);
+	}
+
+	return CMD_RET_SUCCESS;
+
+cleanup:
+	stm32prog_clean(data);
+	free(stm32prog_data);
+	stm32prog_data = NULL;
+
+	return CMD_RET_FAILURE;
+}
+
+U_BOOT_CMD(stm32prog, 5, 0, do_stm32prog,
+	   "<link> <dev> [<addr>] [<size>]\n"
+	   "start communication with tools STM32Cubeprogrammer on <link> with Flashlayout at <addr>",
+	   "<link> = serial|usb\n"
+	   "<dev>  = device instance\n"
+	   "<addr> = address of flashlayout\n"
+	   "<size> = size of flashlayout\n"
+);
+
+bool stm32prog_get_tee_partitions(void)
+{
+	if (stm32prog_data)
+		return stm32prog_data->tee_detected;
+
+	return false;
+}
+
+bool stm32prog_get_fsbl_nor(void)
+{
+	if (stm32prog_data)
+		return stm32prog_data->fsbl_nor_detected;
+
+	return false;
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
new file mode 100644
index 000000000..4c4d8a7a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
@@ -0,0 +1,1778 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <command.h>
+#include <console.h>
+#include <dfu.h>
+#include <malloc.h>
+#include <misc.h>
+#include <mmc.h>
+#include <part.h>
+#include <asm/arch/stm32mp1_smc.h>
+#include <asm/global_data.h>
+#include <dm/uclass.h>
+#include <jffs2/load_kernel.h>
+#include <linux/list.h>
+#include <linux/list_sort.h>
+#include <linux/mtd/mtd.h>
+#include <linux/sizes.h>
+
+#include "stm32prog.h"
+
+/* Primary GPT header size for 128 entries : 17kB = 34 LBA of 512B */
+#define GPT_HEADER_SZ	34
+
+#define OPT_SELECT	BIT(0)
+#define OPT_EMPTY	BIT(1)
+#define OPT_DELETE	BIT(2)
+
+#define IS_SELECT(part)	((part)->option & OPT_SELECT)
+#define IS_EMPTY(part)	((part)->option & OPT_EMPTY)
+#define IS_DELETE(part)	((part)->option & OPT_DELETE)
+
+#define ALT_BUF_LEN			SZ_1K
+
+#define ROOTFS_MMC0_UUID \
+	EFI_GUID(0xE91C4E10, 0x16E6, 0x4C0E, \
+		 0xBD, 0x0E, 0x77, 0xBE, 0xCF, 0x4A, 0x35, 0x82)
+
+#define ROOTFS_MMC1_UUID \
+	EFI_GUID(0x491F6117, 0x415D, 0x4F53, \
+		 0x88, 0xC9, 0x6E, 0x0D, 0xE5, 0x4D, 0xEA, 0xC6)
+
+#define ROOTFS_MMC2_UUID \
+	EFI_GUID(0xFD58F1C7, 0xBE0D, 0x4338, \
+		 0x88, 0xE9, 0xAD, 0x8F, 0x05, 0x0A, 0xEB, 0x18)
+
+/* RAW parttion (binary / bootloader) used Linux - reserved UUID */
+#define LINUX_RESERVED_UUID "8DA63339-0007-60C0-C436-083AC8230908"
+
+/*
+ * unique partition guid (uuid) for partition named "rootfs"
+ * on each MMC instance = SD Card or eMMC
+ * allow fixed kernel bootcmd: "rootf=PARTUID=e91c4e10-..."
+ */
+static const efi_guid_t uuid_mmc[3] = {
+	ROOTFS_MMC0_UUID,
+	ROOTFS_MMC1_UUID,
+	ROOTFS_MMC2_UUID
+};
+
+/* order of column in flash layout file */
+enum stm32prog_col_t {
+	COL_OPTION,
+	COL_ID,
+	COL_NAME,
+	COL_TYPE,
+	COL_IP,
+	COL_OFFSET,
+	COL_NB_STM32
+};
+
+#define FIP_TOC_HEADER_NAME	0xAA640001
+
+struct fip_toc_header {
+	u32	name;
+	u32	serial_number;
+	u64	flags;
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* partition handling routines : CONFIG_CMD_MTDPARTS */
+int mtdparts_init(void);
+int find_dev_and_part(const char *id, struct mtd_device **dev,
+		      u8 *part_num, struct part_info **part);
+
+char *stm32prog_get_error(struct stm32prog_data *data)
+{
+	static const char error_msg[] = "Unspecified";
+
+	if (strlen(data->error) == 0)
+		strcpy(data->error, error_msg);
+
+	return data->error;
+}
+
+static bool stm32prog_is_fip_header(struct fip_toc_header *header)
+{
+	return (header->name == FIP_TOC_HEADER_NAME) && header->serial_number;
+}
+
+void stm32prog_header_check(struct raw_header_s *raw_header,
+			    struct image_header_s *header)
+{
+	unsigned int i;
+
+	if (!raw_header || !header) {
+		log_debug("%s:no header data\n", __func__);
+		return;
+	}
+
+	header->type = HEADER_NONE;
+	header->image_checksum = 0x0;
+	header->image_length = 0x0;
+
+	if (stm32prog_is_fip_header((struct fip_toc_header *)raw_header)) {
+		header->type = HEADER_FIP;
+		return;
+	}
+
+	if (raw_header->magic_number !=
+		(('S' << 0) | ('T' << 8) | ('M' << 16) | (0x32 << 24))) {
+		log_debug("%s:invalid magic number : 0x%x\n",
+			  __func__, raw_header->magic_number);
+		return;
+	}
+	/* only header v1.0 supported */
+	if (raw_header->header_version != 0x00010000) {
+		log_debug("%s:invalid header version : 0x%x\n",
+			  __func__, raw_header->header_version);
+		return;
+	}
+	if (raw_header->reserved1 != 0x0 || raw_header->reserved2) {
+		log_debug("%s:invalid reserved field\n", __func__);
+		return;
+	}
+	for (i = 0; i < (sizeof(raw_header->padding) / 4); i++) {
+		if (raw_header->padding[i] != 0) {
+			log_debug("%s:invalid padding field\n", __func__);
+			return;
+		}
+	}
+	header->type = HEADER_STM32IMAGE;
+	header->image_checksum = le32_to_cpu(raw_header->image_checksum);
+	header->image_length = le32_to_cpu(raw_header->image_length);
+
+	return;
+}
+
+static u32 stm32prog_header_checksum(u32 addr, struct image_header_s *header)
+{
+	u32 i, checksum;
+	u8 *payload;
+
+	/* compute checksum on payload */
+	payload = (u8 *)addr;
+	checksum = 0;
+	for (i = header->image_length; i > 0; i--)
+		checksum += *(payload++);
+
+	return checksum;
+}
+
+/* FLASHLAYOUT PARSING *****************************************/
+static int parse_option(struct stm32prog_data *data,
+			int i, char *p, struct stm32prog_part_t *part)
+{
+	int result = 0;
+	char *c = p;
+
+	part->option = 0;
+	if (!strcmp(p, "-"))
+		return 0;
+
+	while (*c) {
+		switch (*c) {
+		case 'P':
+			part->option |= OPT_SELECT;
+			break;
+		case 'E':
+			part->option |= OPT_EMPTY;
+			break;
+		case 'D':
+			part->option |= OPT_DELETE;
+			break;
+		default:
+			result = -EINVAL;
+			stm32prog_err("Layout line %d: invalid option '%c' in %s)",
+				      i, *c, p);
+			return -EINVAL;
+		}
+		c++;
+	}
+	if (!(part->option & OPT_SELECT)) {
+		stm32prog_err("Layout line %d: missing 'P' in option %s", i, p);
+		return -EINVAL;
+	}
+
+	return result;
+}
+
+static int parse_id(struct stm32prog_data *data,
+		    int i, char *p, struct stm32prog_part_t *part)
+{
+	int result = 0;
+	unsigned long value;
+
+	result = strict_strtoul(p, 0, &value);
+	part->id = value;
+	if (result || value > PHASE_LAST_USER) {
+		stm32prog_err("Layout line %d: invalid phase value = %s", i, p);
+		result = -EINVAL;
+	}
+
+	return result;
+}
+
+static int parse_name(struct stm32prog_data *data,
+		      int i, char *p, struct stm32prog_part_t *part)
+{
+	int result = 0;
+
+	if (strlen(p) < sizeof(part->name)) {
+		strcpy(part->name, p);
+	} else {
+		stm32prog_err("Layout line %d: partition name too long [%d]: %s",
+			      i, strlen(p), p);
+		result = -EINVAL;
+	}
+
+	return result;
+}
+
+static int parse_type(struct stm32prog_data *data,
+		      int i, char *p, struct stm32prog_part_t *part)
+{
+	int result = 0;
+	int len = 0;
+
+	part->bin_nb = 0;
+	if (!strncmp(p, "Binary", 6)) {
+		part->part_type = PART_BINARY;
+
+		/* search for Binary(X) case */
+		len = strlen(p);
+		part->bin_nb = 1;
+		if (len > 6) {
+			if (len < 8 ||
+			    (p[6] != '(') ||
+			    (p[len - 1] != ')'))
+				result = -EINVAL;
+			else
+				part->bin_nb =
+					simple_strtoul(&p[7], NULL, 10);
+		}
+	} else if (!strcmp(p, "System")) {
+		part->part_type = PART_SYSTEM;
+	} else if (!strcmp(p, "FileSystem")) {
+		part->part_type = PART_FILESYSTEM;
+	} else if (!strcmp(p, "RawImage")) {
+		part->part_type = RAW_IMAGE;
+	} else {
+		result = -EINVAL;
+	}
+	if (result)
+		stm32prog_err("Layout line %d: type parsing error : '%s'",
+			      i, p);
+
+	return result;
+}
+
+static int parse_ip(struct stm32prog_data *data,
+		    int i, char *p, struct stm32prog_part_t *part)
+{
+	int result = 0;
+	unsigned int len = 0;
+
+	part->dev_id = 0;
+	if (!strcmp(p, "none")) {
+		part->target = STM32PROG_NONE;
+	} else if (!strncmp(p, "mmc", 3)) {
+		part->target = STM32PROG_MMC;
+		len = 3;
+	} else if (!strncmp(p, "nor", 3)) {
+		part->target = STM32PROG_NOR;
+		len = 3;
+	} else if (!strncmp(p, "nand", 4)) {
+		part->target = STM32PROG_NAND;
+		len = 4;
+	} else if (!strncmp(p, "spi-nand", 8)) {
+		part->target = STM32PROG_SPI_NAND;
+		len = 8;
+	} else if (!strncmp(p, "ram", 3)) {
+		part->target = STM32PROG_RAM;
+		len = 0;
+	} else {
+		result = -EINVAL;
+	}
+	if (len) {
+		/* only one digit allowed for device id */
+		if (strlen(p) != len + 1) {
+			result = -EINVAL;
+		} else {
+			part->dev_id = p[len] - '0';
+			if (part->dev_id > 9)
+				result = -EINVAL;
+		}
+	}
+	if (result)
+		stm32prog_err("Layout line %d: ip parsing error: '%s'", i, p);
+
+	return result;
+}
+
+static int parse_offset(struct stm32prog_data *data,
+			int i, char *p, struct stm32prog_part_t *part)
+{
+	int result = 0;
+	char *tail;
+
+	part->part_id = 0;
+	part->addr = 0;
+	part->size = 0;
+	/* eMMC boot parttion */
+	if (!strncmp(p, "boot", 4)) {
+		if (strlen(p) != 5) {
+			result = -EINVAL;
+		} else {
+			if (p[4] == '1')
+				part->part_id = -1;
+			else if (p[4] == '2')
+				part->part_id = -2;
+			else
+				result = -EINVAL;
+		}
+		if (result)
+			stm32prog_err("Layout line %d: invalid part '%s'",
+				      i, p);
+	} else {
+		part->addr = simple_strtoull(p, &tail, 0);
+		if (tail == p || *tail != '\0') {
+			stm32prog_err("Layout line %d: invalid offset '%s'",
+				      i, p);
+			result = -EINVAL;
+		}
+	}
+
+	return result;
+}
+
+static
+int (* const parse[COL_NB_STM32])(struct stm32prog_data *data, int i, char *p,
+				  struct stm32prog_part_t *part) = {
+	[COL_OPTION] = parse_option,
+	[COL_ID] = parse_id,
+	[COL_NAME] =  parse_name,
+	[COL_TYPE] = parse_type,
+	[COL_IP] = parse_ip,
+	[COL_OFFSET] = parse_offset,
+};
+
+static int parse_flash_layout(struct stm32prog_data *data,
+			      ulong addr,
+			      ulong size)
+{
+	int column = 0, part_nb = 0, ret;
+	bool end_of_line, eof;
+	char *p, *start, *last, *col;
+	struct stm32prog_part_t *part;
+	int part_list_size;
+	int i;
+
+	data->part_nb = 0;
+
+	/* check if STM32image is detected */
+	stm32prog_header_check((struct raw_header_s *)addr, &data->header);
+	if (data->header.type == HEADER_STM32IMAGE) {
+		u32 checksum;
+
+		addr = addr + BL_HEADER_SIZE;
+		size = data->header.image_length;
+
+		checksum = stm32prog_header_checksum(addr, &data->header);
+		if (checksum != data->header.image_checksum) {
+			stm32prog_err("Layout: invalid checksum : 0x%x expected 0x%x",
+				      checksum, data->header.image_checksum);
+			return -EIO;
+		}
+	}
+	if (!size)
+		return -EINVAL;
+
+	start = (char *)addr;
+	last = start + size;
+
+	*last = 0x0; /* force null terminated string */
+	log_debug("flash layout =\n%s\n", start);
+
+	/* calculate expected number of partitions */
+	part_list_size = 1;
+	p = start;
+	while (*p && (p < last)) {
+		if (*p++ == '\n') {
+			part_list_size++;
+			if (p < last && *p == '#')
+				part_list_size--;
+		}
+	}
+	if (part_list_size > PHASE_LAST_USER) {
+		stm32prog_err("Layout: too many partition (%d)",
+			      part_list_size);
+		return -1;
+	}
+	part = calloc(sizeof(struct stm32prog_part_t), part_list_size);
+	if (!part) {
+		stm32prog_err("Layout: alloc failed");
+		return -ENOMEM;
+	}
+	data->part_array = part;
+
+	/* main parsing loop */
+	i = 1;
+	eof = false;
+	p = start;
+	col = start; /* 1st column */
+	end_of_line = false;
+	while (!eof) {
+		switch (*p) {
+		/* CR is ignored and replaced by NULL character */
+		case '\r':
+			*p = '\0';
+			p++;
+			continue;
+		case '\0':
+			end_of_line = true;
+			eof = true;
+			break;
+		case '\n':
+			end_of_line = true;
+			break;
+		case '\t':
+			break;
+		case '#':
+			/* comment line is skipped */
+			if (column == 0 && p == col) {
+				while ((p < last) && *p)
+					if (*p++ == '\n')
+						break;
+				col = p;
+				i++;
+				if (p >= last || !*p) {
+					eof = true;
+					end_of_line = true;
+				}
+				continue;
+			}
+			/* fall through */
+		/* by default continue with the next character */
+		default:
+			p++;
+			continue;
+		}
+
+		/* replace by \0: allow string parsing for each column */
+		*p = '\0';
+		p++;
+		if (p >= last) {
+			eof = true;
+			end_of_line = true;
+		}
+
+		/* skip empty line and multiple TAB in tsv file */
+		if (strlen(col) == 0) {
+			col = p;
+			/* skip empty line */
+			if (column == 0 && end_of_line) {
+				end_of_line = false;
+				i++;
+			}
+			continue;
+		}
+
+		if (column < COL_NB_STM32) {
+			ret = parse[column](data, i, col, part);
+			if (ret)
+				return ret;
+		}
+
+		/* save the beginning of the next column */
+		column++;
+		col = p;
+
+		if (!end_of_line)
+			continue;
+
+		/* end of the line detected */
+		end_of_line = false;
+
+		if (column < COL_NB_STM32) {
+			stm32prog_err("Layout line %d: no enought column", i);
+			return -EINVAL;
+		}
+		column = 0;
+		part_nb++;
+		part++;
+		i++;
+		if (part_nb >= part_list_size) {
+			part = NULL;
+			if (!eof) {
+				stm32prog_err("Layout: no enought memory for %d part",
+					      part_nb);
+				return -EINVAL;
+			}
+		}
+	}
+	data->part_nb = part_nb;
+	if (data->part_nb == 0) {
+		stm32prog_err("Layout: no partition found");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int __init part_cmp(void *priv, struct list_head *a, struct list_head *b)
+{
+	struct stm32prog_part_t *parta, *partb;
+
+	parta = container_of(a, struct stm32prog_part_t, list);
+	partb = container_of(b, struct stm32prog_part_t, list);
+
+	if (parta->part_id != partb->part_id)
+		return parta->part_id - partb->part_id;
+	else
+		return parta->addr > partb->addr ? 1 : -1;
+}
+
+static void get_mtd_by_target(char *string, enum stm32prog_target target,
+			      int dev_id)
+{
+	const char *dev_str;
+
+	switch (target) {
+	case STM32PROG_NOR:
+		dev_str = "nor";
+		break;
+	case STM32PROG_NAND:
+		dev_str = "nand";
+		break;
+	case STM32PROG_SPI_NAND:
+		dev_str = "spi-nand";
+		break;
+	default:
+		dev_str = "invalid";
+		break;
+	}
+	sprintf(string, "%s%d", dev_str, dev_id);
+}
+
+static int init_device(struct stm32prog_data *data,
+		       struct stm32prog_dev_t *dev)
+{
+	struct mmc *mmc = NULL;
+	struct blk_desc *block_dev = NULL;
+	struct mtd_info *mtd = NULL;
+	char mtd_id[16];
+	int part_id;
+	int ret;
+	u64 first_addr = 0, last_addr = 0;
+	struct stm32prog_part_t *part, *next_part;
+	u64 part_addr, part_size;
+	bool part_found;
+	const char *part_name;
+
+	switch (dev->target) {
+	case STM32PROG_MMC:
+		if (!IS_ENABLED(CONFIG_MMC)) {
+			stm32prog_err("unknown device type = %d", dev->target);
+			return -ENODEV;
+		}
+		mmc = find_mmc_device(dev->dev_id);
+		if (!mmc || mmc_init(mmc)) {
+			stm32prog_err("mmc device %d not found", dev->dev_id);
+			return -ENODEV;
+		}
+		block_dev = mmc_get_blk_desc(mmc);
+		if (!block_dev) {
+			stm32prog_err("mmc device %d not probed", dev->dev_id);
+			return -ENODEV;
+		}
+		dev->erase_size = mmc->erase_grp_size * block_dev->blksz;
+		dev->mmc = mmc;
+
+		/* reserve a full erase group for each GTP headers */
+		if (mmc->erase_grp_size > GPT_HEADER_SZ) {
+			first_addr = dev->erase_size;
+			last_addr = (u64)(block_dev->lba -
+					  mmc->erase_grp_size) *
+				    block_dev->blksz;
+		} else {
+			first_addr = (u64)GPT_HEADER_SZ * block_dev->blksz;
+			last_addr = (u64)(block_dev->lba - GPT_HEADER_SZ - 1) *
+				    block_dev->blksz;
+		}
+		log_debug("MMC %d: lba=%ld blksz=%ld\n", dev->dev_id,
+			  block_dev->lba, block_dev->blksz);
+		log_debug(" available address = 0x%llx..0x%llx\n",
+			  first_addr, last_addr);
+		log_debug(" full_update = %d\n", dev->full_update);
+		break;
+	case STM32PROG_NOR:
+	case STM32PROG_NAND:
+	case STM32PROG_SPI_NAND:
+		if (!IS_ENABLED(CONFIG_MTD)) {
+			stm32prog_err("unknown device type = %d", dev->target);
+			return -ENODEV;
+		}
+		get_mtd_by_target(mtd_id, dev->target, dev->dev_id);
+		log_debug("%s\n", mtd_id);
+
+		mtdparts_init();
+		mtd = get_mtd_device_nm(mtd_id);
+		if (IS_ERR(mtd)) {
+			stm32prog_err("MTD device %s not found", mtd_id);
+			return -ENODEV;
+		}
+		first_addr = 0;
+		last_addr = mtd->size;
+		dev->erase_size = mtd->erasesize;
+		log_debug("MTD device %s: size=%lld erasesize=%d\n",
+			  mtd_id, mtd->size, mtd->erasesize);
+		log_debug(" available address = 0x%llx..0x%llx\n",
+			  first_addr, last_addr);
+		dev->mtd = mtd;
+		break;
+	case STM32PROG_RAM:
+		first_addr = gd->bd->bi_dram[0].start;
+		last_addr = first_addr + gd->bd->bi_dram[0].size;
+		dev->erase_size = 1;
+		break;
+	default:
+		stm32prog_err("unknown device type = %d", dev->target);
+		return -ENODEV;
+	}
+	log_debug(" erase size = 0x%x\n", dev->erase_size);
+	log_debug(" full_update = %d\n", dev->full_update);
+
+	/* order partition list in offset order */
+	list_sort(NULL, &dev->part_list, &part_cmp);
+	part_id = 1;
+	log_debug("id : Opt Phase     Name target.n dev.n addr     size     part_off part_size\n");
+	list_for_each_entry(part, &dev->part_list, list) {
+		if (part->bin_nb > 1) {
+			if ((dev->target != STM32PROG_NAND &&
+			     dev->target != STM32PROG_SPI_NAND) ||
+			    part->id >= PHASE_FIRST_USER ||
+			    strncmp(part->name, "fsbl", 4)) {
+				stm32prog_err("%s (0x%x): multiple binary %d not supported",
+					      part->name, part->id,
+					      part->bin_nb);
+				return -EINVAL;
+			}
+		}
+		if (part->part_type == RAW_IMAGE) {
+			part->part_id = 0x0;
+			part->addr = 0x0;
+			if (block_dev)
+				part->size = block_dev->lba * block_dev->blksz;
+			else
+				part->size = last_addr;
+			log_debug("-- : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx\n",
+				  part->option, part->id, part->name,
+				  part->part_type, part->bin_nb, part->target,
+				  part->dev_id, part->addr, part->size);
+			continue;
+		}
+		if (part->part_id < 0) { /* boot hw partition for eMMC */
+			if (mmc) {
+				part->size = mmc->capacity_boot;
+			} else {
+				stm32prog_err("%s (0x%x): hw partition not expected : %d",
+					      part->name, part->id,
+					      part->part_id);
+				return -ENODEV;
+			}
+		} else {
+			part->part_id = part_id++;
+
+			/* last partition : size to the end of the device */
+			if (part->list.next != &dev->part_list) {
+				next_part =
+					container_of(part->list.next,
+						     struct stm32prog_part_t,
+						     list);
+				if (part->addr < next_part->addr) {
+					part->size = next_part->addr -
+						     part->addr;
+				} else {
+					stm32prog_err("%s (0x%x): same address : 0x%llx == %s (0x%x): 0x%llx",
+						      part->name, part->id,
+						      part->addr,
+						      next_part->name,
+						      next_part->id,
+						      next_part->addr);
+					return -EINVAL;
+				}
+			} else {
+				if (part->addr <= last_addr) {
+					part->size = last_addr - part->addr;
+				} else {
+					stm32prog_err("%s (0x%x): invalid address 0x%llx (max=0x%llx)",
+						      part->name, part->id,
+						      part->addr, last_addr);
+					return -EINVAL;
+				}
+			}
+			if (part->addr < first_addr) {
+				stm32prog_err("%s (0x%x): invalid address 0x%llx (min=0x%llx)",
+					      part->name, part->id,
+					      part->addr, first_addr);
+				return -EINVAL;
+			}
+		}
+		if ((part->addr & ((u64)part->dev->erase_size - 1)) != 0) {
+			stm32prog_err("%s (0x%x): not aligned address : 0x%llx on erase size 0x%x",
+				      part->name, part->id, part->addr,
+				      part->dev->erase_size);
+			return -EINVAL;
+		}
+		log_debug("%02d : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx",
+			  part->part_id, part->option, part->id, part->name,
+			  part->part_type, part->bin_nb, part->target,
+			  part->dev_id, part->addr, part->size);
+
+		part_addr = 0;
+		part_size = 0;
+		part_found = false;
+
+		/* check coherency with existing partition */
+		if (block_dev) {
+			/*
+			 * block devices with GPT: check user partition size
+			 * only for partial update, the GPT partions are be
+			 * created for full update
+			 */
+			if (dev->full_update || part->part_id < 0) {
+				log_debug("\n");
+				continue;
+			}
+			struct disk_partition partinfo;
+
+			ret = part_get_info(block_dev, part->part_id,
+					    &partinfo);
+
+			if (ret) {
+				stm32prog_err("%s (0x%x):Couldn't find part %d on device mmc %d",
+					      part->name, part->id,
+					      part_id, part->dev_id);
+				return -ENODEV;
+			}
+			part_addr = (u64)partinfo.start * partinfo.blksz;
+			part_size = (u64)partinfo.size * partinfo.blksz;
+			part_name = (char *)partinfo.name;
+			part_found = true;
+		}
+
+		if (IS_ENABLED(CONFIG_MTD) && mtd) {
+			char mtd_part_id[32];
+			struct part_info *mtd_part;
+			struct mtd_device *mtd_dev;
+			u8 part_num;
+
+			sprintf(mtd_part_id, "%s,%d", mtd_id,
+				part->part_id - 1);
+			ret = find_dev_and_part(mtd_part_id, &mtd_dev,
+						&part_num, &mtd_part);
+			if (ret != 0) {
+				stm32prog_err("%s (0x%x): Invalid MTD partition %s",
+					      part->name, part->id,
+					      mtd_part_id);
+				return -ENODEV;
+			}
+			part_addr = mtd_part->offset;
+			part_size = mtd_part->size;
+			part_name = mtd_part->name;
+			part_found = true;
+		}
+
+		/* no partition for this device */
+		if (!part_found) {
+			log_debug("\n");
+			continue;
+		}
+
+		log_debug(" %08llx %08llx\n", part_addr, part_size);
+
+		if (part->addr != part_addr) {
+			stm32prog_err("%s (0x%x): Bad address for partition %d (%s) = 0x%llx <> 0x%llx expected",
+				      part->name, part->id, part->part_id,
+				      part_name, part->addr, part_addr);
+			return -ENODEV;
+		}
+		if (part->size != part_size) {
+			stm32prog_err("%s (0x%x): Bad size for partition %d (%s) at 0x%llx = 0x%llx <> 0x%llx expected",
+				      part->name, part->id, part->part_id,
+				      part_name, part->addr, part->size,
+				      part_size);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+static int treat_partition_list(struct stm32prog_data *data)
+{
+	int i, j;
+	struct stm32prog_part_t *part;
+
+	for (j = 0; j < STM32PROG_MAX_DEV; j++) {
+		data->dev[j].target = STM32PROG_NONE;
+		INIT_LIST_HEAD(&data->dev[j].part_list);
+	}
+
+	data->tee_detected = false;
+	data->fsbl_nor_detected = false;
+	for (i = 0; i < data->part_nb; i++) {
+		part = &data->part_array[i];
+		part->alt_id = -1;
+
+		/* skip partition with IP="none" */
+		if (part->target == STM32PROG_NONE) {
+			if (IS_SELECT(part)) {
+				stm32prog_err("Layout: selected none phase = 0x%x",
+					      part->id);
+				return -EINVAL;
+			}
+			continue;
+		}
+
+		if (part->id == PHASE_FLASHLAYOUT ||
+		    part->id > PHASE_LAST_USER) {
+			stm32prog_err("Layout: invalid phase = 0x%x",
+				      part->id);
+			return -EINVAL;
+		}
+		for (j = i + 1; j < data->part_nb; j++) {
+			if (part->id == data->part_array[j].id) {
+				stm32prog_err("Layout: duplicated phase 0x%x at line %d and %d",
+					      part->id, i, j);
+				return -EINVAL;
+			}
+		}
+		for (j = 0; j < STM32PROG_MAX_DEV; j++) {
+			if (data->dev[j].target == STM32PROG_NONE) {
+				/* new device found */
+				data->dev[j].target = part->target;
+				data->dev[j].dev_id = part->dev_id;
+				data->dev[j].full_update = true;
+				data->dev_nb++;
+				break;
+			} else if ((part->target == data->dev[j].target) &&
+				   (part->dev_id == data->dev[j].dev_id)) {
+				break;
+			}
+		}
+		if (j == STM32PROG_MAX_DEV) {
+			stm32prog_err("Layout: too many device");
+			return -EINVAL;
+		}
+		switch (part->target)  {
+		case STM32PROG_NOR:
+			if (!data->fsbl_nor_detected &&
+			    !strncmp(part->name, "fsbl", 4))
+				data->fsbl_nor_detected = true;
+			/* fallthrough */
+		case STM32PROG_NAND:
+		case STM32PROG_SPI_NAND:
+			if (!data->tee_detected &&
+			    !strncmp(part->name, "tee", 3))
+				data->tee_detected = true;
+			break;
+		default:
+			break;
+		}
+		part->dev = &data->dev[j];
+		if (!IS_SELECT(part))
+			part->dev->full_update = false;
+		list_add_tail(&part->list, &data->dev[j].part_list);
+	}
+
+	return 0;
+}
+
+static int create_gpt_partitions(struct stm32prog_data *data)
+{
+	int offset = 0;
+	const int buflen = SZ_8K;
+	char *buf;
+	char uuid[UUID_STR_LEN + 1];
+	unsigned char *uuid_bin;
+	unsigned int mmc_id;
+	int i;
+	bool rootfs_found;
+	struct stm32prog_part_t *part;
+
+	buf = malloc(buflen);
+	if (!buf)
+		return -ENOMEM;
+
+	puts("partitions : ");
+	/* initialize the selected device */
+	for (i = 0; i < data->dev_nb; i++) {
+		/* create gpt partition support only for full update on MMC */
+		if (data->dev[i].target != STM32PROG_MMC ||
+		    !data->dev[i].full_update)
+			continue;
+
+		offset = 0;
+		rootfs_found = false;
+		memset(buf, 0, buflen);
+
+		list_for_each_entry(part, &data->dev[i].part_list, list) {
+			/* skip eMMC boot partitions */
+			if (part->part_id < 0)
+				continue;
+			/* skip Raw Image */
+			if (part->part_type == RAW_IMAGE)
+				continue;
+
+			if (offset + 100 > buflen) {
+				log_debug("\n%s: buffer too small, %s skippped",
+					  __func__, part->name);
+				continue;
+			}
+
+			if (!offset)
+				offset += sprintf(buf, "gpt write mmc %d \"",
+						  data->dev[i].dev_id);
+
+			offset += snprintf(buf + offset, buflen - offset,
+					   "name=%s,start=0x%llx,size=0x%llx",
+					   part->name,
+					   part->addr,
+					   part->size);
+
+			if (part->part_type == PART_BINARY)
+				offset += snprintf(buf + offset,
+						   buflen - offset,
+						   ",type="
+						   LINUX_RESERVED_UUID);
+			else
+				offset += snprintf(buf + offset,
+						   buflen - offset,
+						   ",type=linux");
+
+			if (part->part_type == PART_SYSTEM)
+				offset += snprintf(buf + offset,
+						   buflen - offset,
+						   ",bootable");
+
+			if (!rootfs_found && !strcmp(part->name, "rootfs")) {
+				mmc_id = part->dev_id;
+				rootfs_found = true;
+				if (mmc_id < ARRAY_SIZE(uuid_mmc)) {
+					uuid_bin =
+					  (unsigned char *)uuid_mmc[mmc_id].b;
+					uuid_bin_to_str(uuid_bin, uuid,
+							UUID_STR_FORMAT_GUID);
+					offset += snprintf(buf + offset,
+							   buflen - offset,
+							   ",uuid=%s", uuid);
+				}
+			}
+
+			offset += snprintf(buf + offset, buflen - offset, ";");
+		}
+
+		if (offset) {
+			offset += snprintf(buf + offset, buflen - offset, "\"");
+			log_debug("\ncmd: %s\n", buf);
+			if (run_command(buf, 0)) {
+				stm32prog_err("GPT partitionning fail: %s",
+					      buf);
+				free(buf);
+
+				return -1;
+			}
+		}
+
+		if (data->dev[i].mmc)
+			part_init(mmc_get_blk_desc(data->dev[i].mmc));
+
+#ifdef DEBUG
+		sprintf(buf, "gpt verify mmc %d", data->dev[i].dev_id);
+		log_debug("\ncmd: %s", buf);
+		if (run_command(buf, 0))
+			printf("fail !\n");
+		else
+			printf("OK\n");
+
+		sprintf(buf, "part list mmc %d", data->dev[i].dev_id);
+		run_command(buf, 0);
+#endif
+	}
+	puts("done\n");
+
+#ifdef DEBUG
+	run_command("mtd list", 0);
+#endif
+	free(buf);
+
+	return 0;
+}
+
+static int stm32prog_alt_add(struct stm32prog_data *data,
+			     struct dfu_entity *dfu,
+			     struct stm32prog_part_t *part)
+{
+	int ret = 0;
+	int offset = 0;
+	char devstr[10];
+	char dfustr[10];
+	char buf[ALT_BUF_LEN];
+	u32 size;
+	char multiplier,  type;
+
+	/* max 3 digit for sector size */
+	if (part->size > SZ_1M) {
+		size = (u32)(part->size / SZ_1M);
+		multiplier = 'M';
+	} else if (part->size > SZ_1K) {
+		size = (u32)(part->size / SZ_1K);
+		multiplier = 'K';
+	} else {
+		size = (u32)part->size;
+		multiplier = 'B';
+	}
+	if (IS_SELECT(part) && !IS_EMPTY(part))
+		type = 'e'; /*Readable and Writeable*/
+	else
+		type = 'a';/*Readable*/
+
+	memset(buf, 0, sizeof(buf));
+	offset = snprintf(buf, ALT_BUF_LEN - offset,
+			  "@%s/0x%02x/1*%d%c%c ",
+			  part->name, part->id,
+			  size, multiplier, type);
+
+	if (part->target == STM32PROG_RAM) {
+		offset += snprintf(buf + offset, ALT_BUF_LEN - offset,
+				   "ram 0x%llx 0x%llx",
+				   part->addr, part->size);
+	} else if (part->part_type == RAW_IMAGE) {
+		u64 dfu_size;
+
+		if (part->dev->target == STM32PROG_MMC)
+			dfu_size = part->size / part->dev->mmc->read_bl_len;
+		else
+			dfu_size = part->size;
+		offset += snprintf(buf + offset, ALT_BUF_LEN - offset,
+				   "raw 0x0 0x%llx", dfu_size);
+	} else if (part->part_id < 0) {
+		u64 nb_blk = part->size / part->dev->mmc->read_bl_len;
+
+		offset += snprintf(buf + offset, ALT_BUF_LEN - offset,
+				   "raw 0x%llx 0x%llx",
+				   part->addr, nb_blk);
+		offset += snprintf(buf + offset, ALT_BUF_LEN - offset,
+				   " mmcpart %d;", -(part->part_id));
+	} else {
+		if (part->part_type == PART_SYSTEM &&
+		    (part->target == STM32PROG_NAND ||
+		     part->target == STM32PROG_NOR ||
+		     part->target == STM32PROG_SPI_NAND))
+			offset += snprintf(buf + offset,
+					   ALT_BUF_LEN - offset,
+					   "partubi");
+		else
+			offset += snprintf(buf + offset,
+					   ALT_BUF_LEN - offset,
+					   "part");
+		/* dev_id requested by DFU MMC */
+		if (part->target == STM32PROG_MMC)
+			offset += snprintf(buf + offset, ALT_BUF_LEN - offset,
+					   " %d", part->dev_id);
+		offset += snprintf(buf + offset, ALT_BUF_LEN - offset,
+				   " %d;", part->part_id);
+	}
+	ret = -ENODEV;
+	switch (part->target) {
+	case STM32PROG_MMC:
+		if (IS_ENABLED(CONFIG_MMC)) {
+			ret = 0;
+			sprintf(dfustr, "mmc");
+			sprintf(devstr, "%d", part->dev_id);
+		}
+		break;
+	case STM32PROG_NAND:
+	case STM32PROG_NOR:
+	case STM32PROG_SPI_NAND:
+		if (IS_ENABLED(CONFIG_MTD)) {
+			ret = 0;
+			sprintf(dfustr, "mtd");
+			get_mtd_by_target(devstr, part->target, part->dev_id);
+		}
+		break;
+	case STM32PROG_RAM:
+		ret = 0;
+		sprintf(dfustr, "ram");
+		sprintf(devstr, "0");
+		break;
+	default:
+		break;
+	}
+	if (ret) {
+		stm32prog_err("invalid target: %d", part->target);
+		return ret;
+	}
+	log_debug("dfu_alt_add(%s,%s,%s)\n", dfustr, devstr, buf);
+	ret = dfu_alt_add(dfu, dfustr, devstr, buf);
+	log_debug("dfu_alt_add(%s,%s,%s) result %d\n",
+		  dfustr, devstr, buf, ret);
+
+	return ret;
+}
+
+static int stm32prog_alt_add_virt(struct dfu_entity *dfu,
+				  char *name, int phase, int size)
+{
+	int ret = 0;
+	char devstr[4];
+	char buf[ALT_BUF_LEN];
+
+	sprintf(devstr, "%d", phase);
+	sprintf(buf, "@%s/0x%02x/1*%dBe", name, phase, size);
+	ret = dfu_alt_add(dfu, "virt", devstr, buf);
+	log_debug("dfu_alt_add(virt,%s,%s) result %d\n", devstr, buf, ret);
+
+	return ret;
+}
+
+static int dfu_init_entities(struct stm32prog_data *data)
+{
+	int ret = 0;
+	int phase, i, alt_id;
+	struct stm32prog_part_t *part;
+	struct dfu_entity *dfu;
+	int alt_nb;
+
+	alt_nb = 3; /* number of virtual = CMD, OTP, PMIC*/
+	if (data->part_nb == 0)
+		alt_nb++;  /* +1 for FlashLayout */
+	else
+		for (i = 0; i < data->part_nb; i++) {
+			if (data->part_array[i].target != STM32PROG_NONE)
+				alt_nb++;
+		}
+
+	if (dfu_alt_init(alt_nb, &dfu))
+		return -ENODEV;
+
+	puts("DFU alt info setting: ");
+	if (data->part_nb) {
+		alt_id = 0;
+		for (phase = 1;
+		     (phase <= PHASE_LAST_USER) &&
+		     (alt_id < alt_nb) && !ret;
+		     phase++) {
+			/* ordering alt setting by phase id */
+			part = NULL;
+			for (i = 0; i < data->part_nb; i++) {
+				if (phase == data->part_array[i].id) {
+					part = &data->part_array[i];
+					break;
+				}
+			}
+			if (!part)
+				continue;
+			if (part->target == STM32PROG_NONE)
+				continue;
+			part->alt_id = alt_id;
+			alt_id++;
+
+			ret = stm32prog_alt_add(data, dfu, part);
+		}
+	} else {
+		char buf[ALT_BUF_LEN];
+
+		sprintf(buf, "@FlashLayout/0x%02x/1*256Ke ram %x 40000",
+			PHASE_FLASHLAYOUT, STM32_DDR_BASE);
+		ret = dfu_alt_add(dfu, "ram", NULL, buf);
+		log_debug("dfu_alt_add(ram, NULL,%s) result %d\n", buf, ret);
+	}
+
+	if (!ret)
+		ret = stm32prog_alt_add_virt(dfu, "virtual", PHASE_CMD, 512);
+
+	if (!ret)
+		ret = stm32prog_alt_add_virt(dfu, "OTP", PHASE_OTP, 512);
+
+	if (!ret && CONFIG_IS_ENABLED(DM_PMIC))
+		ret = stm32prog_alt_add_virt(dfu, "PMIC", PHASE_PMIC, 8);
+
+	if (ret)
+		stm32prog_err("dfu init failed: %d", ret);
+	puts("done\n");
+
+#ifdef DEBUG
+	dfu_show_entities();
+#endif
+	return ret;
+}
+
+int stm32prog_otp_write(struct stm32prog_data *data, u32 offset, u8 *buffer,
+			long *size)
+{
+	log_debug("%s: %x %lx\n", __func__, offset, *size);
+
+	if (!data->otp_part) {
+		data->otp_part = memalign(CONFIG_SYS_CACHELINE_SIZE, OTP_SIZE);
+		if (!data->otp_part)
+			return -ENOMEM;
+	}
+
+	if (!offset)
+		memset(data->otp_part, 0, OTP_SIZE);
+
+	if (offset + *size > OTP_SIZE)
+		*size = OTP_SIZE - offset;
+
+	memcpy((void *)((u32)data->otp_part + offset), buffer, *size);
+
+	return 0;
+}
+
+int stm32prog_otp_read(struct stm32prog_data *data, u32 offset, u8 *buffer,
+		       long *size)
+{
+	int result = 0;
+
+	if (!IS_ENABLED(CONFIG_ARM_SMCCC)) {
+		stm32prog_err("OTP update not supported");
+
+		return -1;
+	}
+
+	log_debug("%s: %x %lx\n", __func__, offset, *size);
+	/* alway read for first packet */
+	if (!offset) {
+		if (!data->otp_part)
+			data->otp_part =
+				memalign(CONFIG_SYS_CACHELINE_SIZE, OTP_SIZE);
+
+		if (!data->otp_part) {
+			result = -ENOMEM;
+			goto end_otp_read;
+		}
+
+		/* init struct with 0 */
+		memset(data->otp_part, 0, OTP_SIZE);
+
+		/* call the service */
+		result = stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_READ_ALL,
+					(u32)data->otp_part, 0);
+		if (result)
+			goto end_otp_read;
+	}
+
+	if (!data->otp_part) {
+		result = -ENOMEM;
+		goto end_otp_read;
+	}
+
+	if (offset + *size > OTP_SIZE)
+		*size = OTP_SIZE - offset;
+	memcpy(buffer, (void *)((u32)data->otp_part + offset), *size);
+
+end_otp_read:
+	log_debug("%s: result %i\n", __func__, result);
+
+	return result;
+}
+
+int stm32prog_otp_start(struct stm32prog_data *data)
+{
+	int result = 0;
+	struct arm_smccc_res res;
+
+	if (!IS_ENABLED(CONFIG_ARM_SMCCC)) {
+		stm32prog_err("OTP update not supported");
+
+		return -1;
+	}
+
+	if (!data->otp_part) {
+		stm32prog_err("start OTP without data");
+		return -1;
+	}
+
+	arm_smccc_smc(STM32_SMC_BSEC, STM32_SMC_WRITE_ALL,
+		      (u32)data->otp_part, 0, 0, 0, 0, 0, &res);
+
+	if (!res.a0) {
+		switch (res.a1) {
+		case 0:
+			result = 0;
+			break;
+		case 1:
+			stm32prog_err("Provisioning");
+			result = 0;
+			break;
+		default:
+			log_err("%s: OTP incorrect value (err = %ld)\n",
+				__func__, res.a1);
+			result = -EINVAL;
+			break;
+		}
+	} else {
+		log_err("%s: Failed to exec svc=%x op=%x in secure mode (err = %ld)\n",
+			__func__, STM32_SMC_BSEC, STM32_SMC_WRITE_ALL, res.a0);
+		result = -EINVAL;
+	}
+
+	free(data->otp_part);
+	data->otp_part = NULL;
+	log_debug("%s: result %i\n", __func__, result);
+
+	return result;
+}
+
+int stm32prog_pmic_write(struct stm32prog_data *data, u32 offset, u8 *buffer,
+			 long *size)
+{
+	log_debug("%s: %x %lx\n", __func__, offset, *size);
+
+	if (!offset)
+		memset(data->pmic_part, 0, PMIC_SIZE);
+
+	if (offset + *size > PMIC_SIZE)
+		*size = PMIC_SIZE - offset;
+
+	memcpy(&data->pmic_part[offset], buffer, *size);
+
+	return 0;
+}
+
+int stm32prog_pmic_read(struct stm32prog_data *data, u32 offset, u8 *buffer,
+			long *size)
+{
+	int result = 0, ret;
+	struct udevice *dev;
+
+	if (!CONFIG_IS_ENABLED(PMIC_STPMIC1)) {
+		stm32prog_err("PMIC update not supported");
+
+		return -EOPNOTSUPP;
+	}
+
+	log_debug("%s: %x %lx\n", __func__, offset, *size);
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(stpmic1_nvm),
+					  &dev);
+	if (ret)
+		return ret;
+
+	/* alway request PMIC for first packet */
+	if (!offset) {
+		/* init struct with 0 */
+		memset(data->pmic_part, 0, PMIC_SIZE);
+
+		ret = uclass_get_device_by_driver(UCLASS_MISC,
+						  DM_DRIVER_GET(stpmic1_nvm),
+						  &dev);
+		if (ret)
+			return ret;
+
+		ret = misc_read(dev, 0xF8, data->pmic_part, PMIC_SIZE);
+		if (ret < 0) {
+			result = ret;
+			goto end_pmic_read;
+		}
+		if (ret != PMIC_SIZE) {
+			result = -EACCES;
+			goto end_pmic_read;
+		}
+	}
+
+	if (offset + *size > PMIC_SIZE)
+		*size = PMIC_SIZE - offset;
+
+	memcpy(buffer, &data->pmic_part[offset], *size);
+
+end_pmic_read:
+	log_debug("%s: result %i\n", __func__, result);
+	return result;
+}
+
+int stm32prog_pmic_start(struct stm32prog_data *data)
+{
+	int ret;
+	struct udevice *dev;
+
+	if (!CONFIG_IS_ENABLED(PMIC_STPMIC1)) {
+		stm32prog_err("PMIC update not supported");
+
+		return -EOPNOTSUPP;
+	}
+
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(stpmic1_nvm),
+					  &dev);
+	if (ret)
+		return ret;
+
+	return misc_write(dev, 0xF8, data->pmic_part, PMIC_SIZE);
+}
+
+/* copy FSBL on NAND to improve reliability on NAND */
+static int stm32prog_copy_fsbl(struct stm32prog_part_t *part)
+{
+	int ret, i;
+	void *fsbl;
+	struct image_header_s header;
+	struct raw_header_s raw_header;
+	struct dfu_entity *dfu;
+	long size, offset;
+
+	if (part->target != STM32PROG_NAND &&
+	    part->target != STM32PROG_SPI_NAND)
+		return -EINVAL;
+
+	dfu = dfu_get_entity(part->alt_id);
+
+	/* read header */
+	dfu_transaction_cleanup(dfu);
+	size = BL_HEADER_SIZE;
+	ret = dfu->read_medium(dfu, 0, (void *)&raw_header, &size);
+	if (ret)
+		return ret;
+
+	stm32prog_header_check(&raw_header, &header);
+	if (header.type != HEADER_STM32IMAGE)
+		return -ENOENT;
+
+	/* read header + payload */
+	size = header.image_length + BL_HEADER_SIZE;
+	size = round_up(size, part->dev->mtd->erasesize);
+	fsbl = calloc(1, size);
+	if (!fsbl)
+		return -ENOMEM;
+	ret = dfu->read_medium(dfu, 0, fsbl, &size);
+	log_debug("%s read size=%lx ret=%d\n", __func__, size, ret);
+	if (ret)
+		goto error;
+
+	dfu_transaction_cleanup(dfu);
+	offset = 0;
+	for (i = part->bin_nb - 1; i > 0; i--) {
+		offset += size;
+		/* write to the next erase block */
+		ret = dfu->write_medium(dfu, offset, fsbl, &size);
+		log_debug("%s copy at ofset=%lx size=%lx ret=%d",
+			  __func__, offset, size, ret);
+		if (ret)
+			goto error;
+	}
+
+error:
+	free(fsbl);
+	return ret;
+}
+
+static void stm32prog_end_phase(struct stm32prog_data *data)
+{
+	if (data->phase == PHASE_FLASHLAYOUT) {
+		if (parse_flash_layout(data, STM32_DDR_BASE, 0))
+			stm32prog_err("Layout: invalid FlashLayout");
+		return;
+	}
+
+	if (!data->cur_part)
+		return;
+
+	if (data->cur_part->target == STM32PROG_RAM) {
+		if (data->cur_part->part_type == PART_SYSTEM)
+			data->uimage = data->cur_part->addr;
+		if (data->cur_part->part_type == PART_FILESYSTEM)
+			data->dtb = data->cur_part->addr;
+	}
+
+	if (CONFIG_IS_ENABLED(MMC) &&
+	    data->cur_part->part_id < 0) {
+		char cmdbuf[60];
+
+		sprintf(cmdbuf, "mmc bootbus %d 0 0 0; mmc partconf %d 1 %d 0",
+			data->cur_part->dev_id, data->cur_part->dev_id,
+			-(data->cur_part->part_id));
+		if (run_command(cmdbuf, 0)) {
+			stm32prog_err("commands '%s' failed", cmdbuf);
+			return;
+		}
+	}
+
+	if (CONFIG_IS_ENABLED(MTD) &&
+	    data->cur_part->bin_nb > 1) {
+		if (stm32prog_copy_fsbl(data->cur_part)) {
+			stm32prog_err("%s (0x%x): copy of fsbl failed",
+				      data->cur_part->name, data->cur_part->id);
+			return;
+		}
+	}
+}
+
+void stm32prog_do_reset(struct stm32prog_data *data)
+{
+	if (data->phase == PHASE_RESET) {
+		data->phase = PHASE_DO_RESET;
+		puts("Reset requested\n");
+	}
+}
+
+void stm32prog_next_phase(struct stm32prog_data *data)
+{
+	int phase, i;
+	struct stm32prog_part_t *part;
+	bool found;
+
+	phase = data->phase;
+	switch (phase) {
+	case PHASE_RESET:
+	case PHASE_END:
+	case PHASE_DO_RESET:
+		return;
+	}
+
+	/* found next selected partition */
+	data->dfu_seq = 0;
+	data->cur_part = NULL;
+	data->phase = PHASE_END;
+	found = false;
+	do {
+		phase++;
+		if (phase > PHASE_LAST_USER)
+			break;
+		for (i = 0; i < data->part_nb; i++) {
+			part = &data->part_array[i];
+			if (part->id == phase) {
+				if (IS_SELECT(part) && !IS_EMPTY(part)) {
+					data->cur_part = part;
+					data->phase = phase;
+					found = true;
+				}
+				break;
+			}
+		}
+	} while (!found);
+
+	if (data->phase == PHASE_END)
+		puts("Phase=END\n");
+}
+
+static int part_delete(struct stm32prog_data *data,
+		       struct stm32prog_part_t *part)
+{
+	int ret = 0;
+	unsigned long blks, blks_offset, blks_size;
+	struct blk_desc *block_dev = NULL;
+	char cmdbuf[40];
+	char devstr[10];
+
+	printf("Erasing %s ", part->name);
+	switch (part->target) {
+	case STM32PROG_MMC:
+		if (!IS_ENABLED(CONFIG_MMC)) {
+			ret = -1;
+			stm32prog_err("%s (0x%x): erase invalid",
+				      part->name, part->id);
+			break;
+		}
+		printf("on mmc %d: ", part->dev->dev_id);
+		block_dev = mmc_get_blk_desc(part->dev->mmc);
+		blks_offset = lldiv(part->addr, part->dev->mmc->read_bl_len);
+		blks_size = lldiv(part->size, part->dev->mmc->read_bl_len);
+		/* -1 or -2 : delete boot partition of MMC
+		 * need to switch to associated hwpart 1 or 2
+		 */
+		if (part->part_id < 0)
+			if (blk_select_hwpart_devnum(IF_TYPE_MMC,
+						     part->dev->dev_id,
+						     -part->part_id))
+				return -1;
+
+		blks = blk_derase(block_dev, blks_offset, blks_size);
+
+		/* return to user partition */
+		if (part->part_id < 0)
+			blk_select_hwpart_devnum(IF_TYPE_MMC,
+						 part->dev->dev_id, 0);
+		if (blks != blks_size) {
+			ret = -1;
+			stm32prog_err("%s (0x%x): MMC erase failed",
+				      part->name, part->id);
+		}
+		break;
+	case STM32PROG_NOR:
+	case STM32PROG_NAND:
+	case STM32PROG_SPI_NAND:
+		if (!IS_ENABLED(CONFIG_MTD)) {
+			ret = -1;
+			stm32prog_err("%s (0x%x): erase invalid",
+				      part->name, part->id);
+			break;
+		}
+		get_mtd_by_target(devstr, part->target, part->dev->dev_id);
+		printf("on %s: ", devstr);
+		sprintf(cmdbuf, "mtd erase %s 0x%llx 0x%llx",
+			devstr, part->addr, part->size);
+		if (run_command(cmdbuf, 0)) {
+			ret = -1;
+			stm32prog_err("%s (0x%x): MTD erase commands failed (%s)",
+				      part->name, part->id, cmdbuf);
+		}
+		break;
+	case STM32PROG_RAM:
+		printf("on ram: ");
+		memset((void *)(uintptr_t)part->addr, 0, (size_t)part->size);
+		break;
+	default:
+		ret = -1;
+		stm32prog_err("%s (0x%x): erase invalid", part->name, part->id);
+		break;
+	}
+	if (!ret)
+		printf("done\n");
+
+	return ret;
+}
+
+static void stm32prog_devices_init(struct stm32prog_data *data)
+{
+	int i;
+	int ret;
+	struct stm32prog_part_t *part;
+
+	ret = treat_partition_list(data);
+	if (ret)
+		goto error;
+
+	/* initialize the selected device */
+	for (i = 0; i < data->dev_nb; i++) {
+		ret = init_device(data, &data->dev[i]);
+		if (ret)
+			goto error;
+	}
+
+	/* delete RAW partition before create partition */
+	for (i = 0; i < data->part_nb; i++) {
+		part = &data->part_array[i];
+
+		if (part->part_type != RAW_IMAGE)
+			continue;
+
+		if (!IS_SELECT(part) || !IS_DELETE(part))
+			continue;
+
+		ret = part_delete(data, part);
+		if (ret)
+			goto error;
+	}
+
+	if (IS_ENABLED(CONFIG_MMC)) {
+		ret = create_gpt_partitions(data);
+		if (ret)
+			goto error;
+	}
+
+	/* delete partition GPT or MTD */
+	for (i = 0; i < data->part_nb; i++) {
+		part = &data->part_array[i];
+
+		if (part->part_type == RAW_IMAGE)
+			continue;
+
+		if (!IS_SELECT(part) || !IS_DELETE(part))
+			continue;
+
+		ret = part_delete(data, part);
+		if (ret)
+			goto error;
+	}
+
+	return;
+
+error:
+	data->part_nb = 0;
+}
+
+int stm32prog_dfu_init(struct stm32prog_data *data)
+{
+	/* init device if no error */
+	if (data->part_nb)
+		stm32prog_devices_init(data);
+
+	if (data->part_nb)
+		stm32prog_next_phase(data);
+
+	/* prepare DFU for device read/write */
+	dfu_free_entities();
+	return dfu_init_entities(data);
+}
+
+int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size)
+{
+	memset(data, 0x0, sizeof(*data));
+	data->read_phase = PHASE_RESET;
+	data->phase = PHASE_FLASHLAYOUT;
+
+	return parse_flash_layout(data, addr, size);
+}
+
+void stm32prog_clean(struct stm32prog_data *data)
+{
+	/* clean */
+	dfu_free_entities();
+	free(data->part_array);
+	free(data->otp_part);
+	free(data->buffer);
+	free(data->header_data);
+}
+
+/* DFU callback: used after serial and direct DFU USB access */
+void dfu_flush_callback(struct dfu_entity *dfu)
+{
+	if (!stm32prog_data)
+		return;
+
+	if (dfu->dev_type == DFU_DEV_VIRT) {
+		if (dfu->data.virt.dev_num == PHASE_OTP)
+			stm32prog_otp_start(stm32prog_data);
+		else if (dfu->data.virt.dev_num == PHASE_PMIC)
+			stm32prog_pmic_start(stm32prog_data);
+		return;
+	}
+
+	if (dfu->dev_type == DFU_DEV_RAM) {
+		if (dfu->alt == 0 &&
+		    stm32prog_data->phase == PHASE_FLASHLAYOUT) {
+			stm32prog_end_phase(stm32prog_data);
+			/* waiting DFU DETACH for reenumeration */
+		}
+	}
+
+	if (!stm32prog_data->cur_part)
+		return;
+
+	if (dfu->alt == stm32prog_data->cur_part->alt_id) {
+		stm32prog_end_phase(stm32prog_data);
+		stm32prog_next_phase(stm32prog_data);
+	}
+}
+
+void dfu_initiated_callback(struct dfu_entity *dfu)
+{
+	if (!stm32prog_data)
+		return;
+
+	if (!stm32prog_data->cur_part)
+		return;
+
+	/* force the saved offset for the current partition */
+	if (dfu->alt == stm32prog_data->cur_part->alt_id) {
+		dfu->offset = stm32prog_data->offset;
+		stm32prog_data->dfu_seq = 0;
+		log_debug("dfu offset = 0x%llx\n", dfu->offset);
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
new file mode 100644
index 000000000..581b10d0a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef _STM32PROG_H_
+#define _STM32PROG_H_
+
+/* - phase defines ------------------------------------------------*/
+#define PHASE_FLASHLAYOUT	0x00
+#define PHASE_FIRST_USER	0x10
+#define PHASE_LAST_USER		0xF0
+#define PHASE_CMD		0xF1
+#define PHASE_OTP		0xF2
+#define PHASE_PMIC		0xF4
+#define PHASE_END		0xFE
+#define PHASE_RESET		0xFF
+#define PHASE_DO_RESET		0x1FF
+
+#define DEFAULT_ADDRESS		0xFFFFFFFF
+
+#define OTP_SIZE		1024
+#define PMIC_SIZE		8
+
+enum stm32prog_target {
+	STM32PROG_NONE,
+	STM32PROG_MMC,
+	STM32PROG_NAND,
+	STM32PROG_NOR,
+	STM32PROG_SPI_NAND,
+	STM32PROG_RAM
+};
+
+enum stm32prog_link_t {
+	LINK_SERIAL,
+	LINK_USB,
+	LINK_UNDEFINED,
+};
+
+enum stm32prog_header_t {
+	HEADER_NONE,
+	HEADER_STM32IMAGE,
+	HEADER_FIP,
+};
+
+struct image_header_s {
+	enum stm32prog_header_t type;
+	u32	image_checksum;
+	u32	image_length;
+};
+
+struct raw_header_s {
+	u32 magic_number;
+	u32 image_signature[64 / 4];
+	u32 image_checksum;
+	u32 header_version;
+	u32 image_length;
+	u32 image_entry_point;
+	u32 reserved1;
+	u32 load_address;
+	u32 reserved2;
+	u32 version_number;
+	u32 option_flags;
+	u32 ecdsa_algorithm;
+	u32 ecdsa_public_key[64 / 4];
+	u32 padding[83 / 4];
+	u32 binary_type;
+};
+
+#define BL_HEADER_SIZE	sizeof(struct raw_header_s)
+
+/* partition type in flashlayout file */
+enum stm32prog_part_type {
+	PART_BINARY,
+	PART_SYSTEM,
+	PART_FILESYSTEM,
+	RAW_IMAGE
+};
+
+/* device information */
+struct stm32prog_dev_t {
+	enum stm32prog_target	target;
+	char			dev_id;
+	u32			erase_size;
+	struct mmc		*mmc;
+	struct mtd_info		*mtd;
+	/* list of partition for this device / ordered in offset */
+	struct list_head	part_list;
+	bool			full_update;
+};
+
+/* partition information build from FlashLayout and device */
+struct stm32prog_part_t {
+	/* FlashLayout information */
+	int			option;
+	int			id;
+	enum stm32prog_part_type part_type;
+	enum stm32prog_target	target;
+	char			dev_id;
+
+	/* partition name
+	 * (16 char in gpt, + 1 for null terminated string
+	 */
+	char			name[16 + 1];
+	u64			addr;
+	u64			size;
+	enum stm32prog_part_type bin_nb;	/* SSBL repeatition */
+
+	/* information on associated device */
+	struct stm32prog_dev_t	*dev;		/* pointer to device */
+	s16			part_id;	/* partition id in device */
+	int			alt_id;		/* alt id in usb/dfu */
+
+	struct list_head	list;
+};
+
+#define STM32PROG_MAX_DEV 5
+struct stm32prog_data {
+	/* Layout information */
+	int			dev_nb;		/* device number*/
+	struct stm32prog_dev_t	dev[STM32PROG_MAX_DEV];	/* array of device */
+	int			part_nb;	/* nb of partition */
+	struct stm32prog_part_t	*part_array;	/* array of partition */
+	bool			tee_detected;
+	bool			fsbl_nor_detected;
+
+	/* command internal information */
+	unsigned int		phase;
+	u32			offset;
+	char			error[255];
+	struct stm32prog_part_t	*cur_part;
+	u32			*otp_part;
+	u8			pmic_part[PMIC_SIZE];
+
+	/* STM32 header information */
+	struct raw_header_s	*header_data;
+	struct image_header_s	header;
+
+	/* SERIAL information */
+	u32	cursor;
+	u32	packet_number;
+	u32	checksum;
+	u8	*buffer; /* size = USART_RAM_BUFFER_SIZE*/
+	int	dfu_seq;
+	u8	read_phase;
+
+	/* bootm information */
+	u32	uimage;
+	u32	dtb;
+};
+
+extern struct stm32prog_data *stm32prog_data;
+
+/* OTP access */
+int stm32prog_otp_write(struct stm32prog_data *data, u32 offset,
+			u8 *buffer, long *size);
+int stm32prog_otp_read(struct stm32prog_data *data, u32 offset,
+		       u8 *buffer, long *size);
+int stm32prog_otp_start(struct stm32prog_data *data);
+
+/* PMIC access */
+int stm32prog_pmic_write(struct stm32prog_data *data, u32 offset,
+			 u8 *buffer, long *size);
+int stm32prog_pmic_read(struct stm32prog_data *data, u32 offset,
+			u8 *buffer, long *size);
+int stm32prog_pmic_start(struct stm32prog_data *data);
+
+/* generic part*/
+void stm32prog_header_check(struct raw_header_s *raw_header,
+			    struct image_header_s *header);
+int stm32prog_dfu_init(struct stm32prog_data *data);
+void stm32prog_next_phase(struct stm32prog_data *data);
+void stm32prog_do_reset(struct stm32prog_data *data);
+
+char *stm32prog_get_error(struct stm32prog_data *data);
+
+#define stm32prog_err(args...) {\
+	if (data->phase != PHASE_RESET) { \
+		sprintf(data->error, args); \
+		data->phase = PHASE_RESET; \
+		log_err("Error: %s\n", data->error); } \
+	}
+
+/* Main function */
+int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size);
+void stm32prog_clean(struct stm32prog_data *data);
+
+#ifdef CONFIG_CMD_STM32PROG_SERIAL
+int stm32prog_serial_init(struct stm32prog_data *data, int link_dev);
+bool stm32prog_serial_loop(struct stm32prog_data *data);
+#else
+static inline int stm32prog_serial_init(struct stm32prog_data *data, int link_dev)
+{
+	return -ENOSYS;
+}
+
+static inline bool stm32prog_serial_loop(struct stm32prog_data *data)
+{
+	return false;
+}
+#endif
+
+#ifdef CONFIG_CMD_STM32PROG_USB
+bool stm32prog_usb_loop(struct stm32prog_data *data, int dev);
+#else
+static inline bool stm32prog_usb_loop(struct stm32prog_data *data, int dev)
+{
+	return false;
+}
+#endif
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
new file mode 100644
index 000000000..2b92e3b14
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
@@ -0,0 +1,977 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <console.h>
+#include <dm.h>
+#include <dfu.h>
+#include <malloc.h>
+#include <serial.h>
+#include <watchdog.h>
+#include <dm/lists.h>
+#include <dm/device-internal.h>
+#include <linux/delay.h>
+#include <asm/global_data.h>
+#include "stm32prog.h"
+
+/* - configuration part -----------------------------*/
+#define USART_BL_VERSION	0x40	/* USART bootloader version V4.0*/
+#define UBOOT_BL_VERSION	0x03	/* bootloader version V0.3*/
+#define DEVICE_ID_BYTE1		0x05	/* MSB byte of device ID*/
+#define DEVICE_ID_BYTE2		0x00	/* LSB byte of device ID*/
+#define USART_RAM_BUFFER_SIZE	256	/* Size of USART_RAM_Buf buffer*/
+
+/* - Commands -----------------------------*/
+#define GET_CMD_COMMAND		0x00	/* Get CMD command*/
+#define GET_VER_COMMAND		0x01	/* Get Version command*/
+#define GET_ID_COMMAND		0x02	/* Get ID command*/
+#define GET_PHASE_COMMAND	0x03	/* Get Phase command*/
+#define RM_COMMAND		0x11	/* Read Memory command*/
+#define READ_PART_COMMAND	0x12	/* Read Partition command*/
+#define START_COMMAND		0x21	/* START command (Go)*/
+#define DOWNLOAD_COMMAND	0x31	/* Download command*/
+/* existing command for other STM32 but not used */
+/* ERASE			0x43 */
+/* EXTENDED_ERASE		0x44 */
+/* WRITE_UNPROTECTED		0x73 */
+/* READOUT_PROTECT		0x82 */
+/* READOUT_UNPROTECT		0x92 */
+
+/* - miscellaneous defines ----------------------------------------*/
+#define INIT_BYTE		0x7F	/*Init Byte ID*/
+#define ACK_BYTE		0x79	/*Acknowlede Byte ID*/
+#define NACK_BYTE		0x1F	/*No Acknowlede Byte ID*/
+#define ABORT_BYTE		0x5F	/*ABORT*/
+
+struct udevice *down_serial_dev;
+
+const u8 cmd_id[] = {
+	GET_CMD_COMMAND,
+	GET_VER_COMMAND,
+	GET_ID_COMMAND,
+	GET_PHASE_COMMAND,
+	RM_COMMAND,
+	READ_PART_COMMAND,
+	START_COMMAND,
+	DOWNLOAD_COMMAND
+};
+
+#define NB_CMD sizeof(cmd_id)
+
+/* DFU support for serial *********************************************/
+static struct dfu_entity *stm32prog_get_entity(struct stm32prog_data *data)
+{
+	int alt_id;
+
+	if (!data->cur_part)
+		if (data->phase == PHASE_FLASHLAYOUT)
+			alt_id = 0;
+		else
+			return NULL;
+	else
+		alt_id = data->cur_part->alt_id;
+
+	return dfu_get_entity(alt_id);
+}
+
+static int stm32prog_write(struct stm32prog_data *data, u8 *buffer,
+			   u32 buffer_size)
+{
+	struct dfu_entity *dfu_entity;
+	u8 ret = 0;
+
+	dfu_entity = stm32prog_get_entity(data);
+	if (!dfu_entity)
+		return -ENODEV;
+
+	ret = dfu_write(dfu_entity,
+			buffer,
+			buffer_size,
+			data->dfu_seq);
+
+	if (ret) {
+		stm32prog_err("DFU write failed [%d] cnt: %d",
+			      ret, data->dfu_seq);
+	}
+	data->dfu_seq++;
+	/* handle rollover as in driver/dfu/dfu.c */
+	data->dfu_seq &= 0xffff;
+	if (buffer_size == 0)
+		data->dfu_seq = 0; /* flush done */
+
+	return ret;
+}
+
+static int stm32prog_read(struct stm32prog_data *data, u8 phase, u32 offset,
+			  u8 *buffer, u32 buffer_size)
+{
+	struct dfu_entity *dfu_entity;
+	struct stm32prog_part_t *part;
+	u32 size;
+	int ret, i;
+
+	if (data->dfu_seq) {
+		stm32prog_err("DFU write pending for phase %d, seq %d",
+			      data->phase, data->dfu_seq);
+		return -EINVAL;
+	}
+	if (phase == PHASE_FLASHLAYOUT || phase > PHASE_LAST_USER) {
+		stm32prog_err("read failed : phase %d is invalid", phase);
+		return -EINVAL;
+	}
+	if (data->read_phase <= PHASE_LAST_USER &&
+	    phase != data->read_phase) {
+		/* clear previous read session */
+		dfu_entity = dfu_get_entity(data->read_phase - 1);
+		if (dfu_entity)
+			dfu_transaction_cleanup(dfu_entity);
+	}
+
+	dfu_entity = NULL;
+	/* found partition for the expected phase */
+	for (i = 0; i < data->part_nb; i++) {
+		part = &data->part_array[i];
+		if (part->id == phase)
+			dfu_entity = dfu_get_entity(part->alt_id);
+	}
+	if (!dfu_entity) {
+		stm32prog_err("read failed : phase %d is unknown", phase);
+		return -ENODEV;
+	}
+
+	/* clear pending read before to force offset */
+	if (dfu_entity->inited &&
+	    (data->read_phase != phase || data->offset != offset))
+		dfu_transaction_cleanup(dfu_entity);
+
+	/* initiate before to force offset */
+	if (!dfu_entity->inited) {
+		ret = dfu_transaction_initiate(dfu_entity, true);
+			if (ret < 0) {
+				stm32prog_err("DFU read init failed [%d] phase = %d offset = 0x%08x",
+					      ret, phase, offset);
+			return ret;
+		}
+	}
+	/* force new offset */
+	if (dfu_entity->offset != offset)
+		dfu_entity->offset = offset;
+	data->offset = offset;
+	data->read_phase = phase;
+	log_debug("\nSTM32 download read %s offset=0x%x\n",
+		  dfu_entity->name, offset);
+	ret = dfu_read(dfu_entity, buffer, buffer_size,
+		       dfu_entity->i_blk_seq_num);
+	if (ret < 0) {
+		stm32prog_err("DFU read failed [%d] phase = %d offset = 0x%08x",
+			      ret, phase, offset);
+		return ret;
+	}
+
+	size = ret;
+
+	if (size < buffer_size) {
+		data->offset = 0;
+		data->read_phase = PHASE_END;
+		memset(buffer + size, 0, buffer_size - size);
+	} else {
+		data->offset += size;
+	}
+
+	return ret;
+}
+
+/* UART access ***************************************************/
+int stm32prog_serial_init(struct stm32prog_data *data, int link_dev)
+{
+	struct udevice *dev = NULL;
+	struct dm_serial_ops *ops;
+	/* no parity, 8 bits, 1 stop */
+	u32 serial_config = SERIAL_DEFAULT_CONFIG;
+
+	down_serial_dev = NULL;
+
+	if (uclass_get_device_by_seq(UCLASS_SERIAL, link_dev, &dev)) {
+		log_err("serial %d device not found\n", link_dev);
+		return -ENODEV;
+	}
+
+	down_serial_dev = dev;
+
+	/* force silent console on uart only when used */
+	if (gd->cur_serial_dev == down_serial_dev)
+		gd->flags |= GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT;
+	else
+		gd->flags &= ~(GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT);
+
+	ops = serial_get_ops(down_serial_dev);
+
+	if (!ops) {
+		log_err("serial %d = %s missing ops\n", link_dev, dev->name);
+		return -ENODEV;
+	}
+	if (!ops->setconfig) {
+		log_err("serial %d = %s missing setconfig\n", link_dev, dev->name);
+		return -ENODEV;
+	}
+
+	clrsetbits_le32(&serial_config, SERIAL_PAR_MASK, SERIAL_PAR_EVEN);
+
+	data->buffer = memalign(CONFIG_SYS_CACHELINE_SIZE,
+				USART_RAM_BUFFER_SIZE);
+
+	return ops->setconfig(down_serial_dev, serial_config);
+}
+
+static void stm32prog_serial_flush(void)
+{
+	struct dm_serial_ops *ops = serial_get_ops(down_serial_dev);
+	int err;
+
+	do {
+		err = ops->getc(down_serial_dev);
+	} while (err != -EAGAIN);
+}
+
+static int stm32prog_serial_getc_err(void)
+{
+	struct dm_serial_ops *ops = serial_get_ops(down_serial_dev);
+	int err;
+
+	do {
+		err = ops->getc(down_serial_dev);
+		if (err == -EAGAIN) {
+			ctrlc();
+			WATCHDOG_RESET();
+		}
+	} while ((err == -EAGAIN) && (!had_ctrlc()));
+
+	return err;
+}
+
+static u8 stm32prog_serial_getc(void)
+{
+	int err;
+
+	err = stm32prog_serial_getc_err();
+
+	return err >= 0 ? err : 0;
+}
+
+static bool stm32prog_serial_get_buffer(u8 *buffer, u32 *count)
+{
+	struct dm_serial_ops *ops = serial_get_ops(down_serial_dev);
+	int err;
+
+	do {
+		err = ops->getc(down_serial_dev);
+		if (err >= 0) {
+			*buffer++ = err;
+			*count -= 1;
+		} else if (err == -EAGAIN) {
+			ctrlc();
+			WATCHDOG_RESET();
+		} else {
+			break;
+		}
+	} while (*count && !had_ctrlc());
+
+	return !!(err < 0);
+}
+
+static void stm32prog_serial_putc(u8 w_byte)
+{
+	struct dm_serial_ops *ops = serial_get_ops(down_serial_dev);
+	int err;
+
+	do {
+		err = ops->putc(down_serial_dev, w_byte);
+	} while (err == -EAGAIN);
+}
+
+/* Helper function ************************************************/
+
+static u8 stm32prog_header(struct stm32prog_data *data)
+{
+	u8 ret;
+	u8 boot = 0;
+	struct dfu_entity *dfu_entity;
+	u64 size = 0;
+
+	dfu_entity = stm32prog_get_entity(data);
+	if (!dfu_entity)
+		return -ENODEV;
+
+	printf("\nSTM32 download write %s\n", dfu_entity->name);
+
+	/* force cleanup to avoid issue with previous read */
+	dfu_transaction_cleanup(dfu_entity);
+
+	stm32prog_header_check(data->header_data, &data->header);
+
+	/* no stm32 image header : max size is partition size */
+	if (data->header.type != HEADER_STM32IMAGE) {
+		dfu_entity->get_medium_size(dfu_entity, &size);
+		data->header.image_length = size;
+	}
+
+	/**** Flash the header if necessary for boot partition */
+	if (data->phase < PHASE_FIRST_USER)
+		boot = 1;
+
+	/* write header if boot partition */
+	if (boot) {
+		if (ret) {
+			stm32prog_err("invalid header (error %d)", ret);
+		} else {
+			ret = stm32prog_write(data,
+					      (u8 *)data->header_data,
+					      BL_HEADER_SIZE);
+		}
+	} else {
+		if (ret)
+			printf("  partition without checksum\n");
+		ret = 0;
+	}
+
+	free(data->header_data);
+	data->header_data = NULL;
+
+	return ret;
+}
+
+static u8 stm32prog_start(struct stm32prog_data *data, u32 address)
+{
+	u8 ret = 0;
+	struct dfu_entity *dfu_entity;
+
+	if (address < 0x100) {
+		if (address == PHASE_OTP)
+			return stm32prog_otp_start(data);
+
+		if (address == PHASE_PMIC)
+			return stm32prog_pmic_start(data);
+
+		if (address == PHASE_RESET || address == PHASE_END) {
+			data->cur_part = NULL;
+			data->dfu_seq = 0;
+			data->phase = address;
+			return 0;
+		}
+		if (address != data->phase) {
+			stm32prog_err("invalid received phase id %d, current phase is %d",
+				      (u8)address, (u8)data->phase);
+			return -EINVAL;
+		}
+	}
+	/* check the last loaded partition */
+	if (address == DEFAULT_ADDRESS || address == data->phase) {
+		switch (data->phase) {
+		case PHASE_END:
+		case PHASE_RESET:
+		case PHASE_DO_RESET:
+			data->cur_part = NULL;
+			data->phase = PHASE_DO_RESET;
+			return 0;
+		}
+		dfu_entity = stm32prog_get_entity(data);
+		if (!dfu_entity)
+			return -ENODEV;
+
+		ret = dfu_flush(dfu_entity, NULL, 0, data->dfu_seq);
+		if (ret) {
+			stm32prog_err("DFU flush failed [%d]", ret);
+			return ret;
+		}
+		data->dfu_seq = 0;
+
+		printf("\n  received length = 0x%x\n", data->cursor);
+		if (data->header.type == HEADER_STM32IMAGE) {
+			if (data->cursor !=
+			    (data->header.image_length + BL_HEADER_SIZE)) {
+				stm32prog_err("transmission interrupted (length=0x%x expected=0x%x)",
+					      data->cursor,
+					      data->header.image_length +
+					      BL_HEADER_SIZE);
+				return -EIO;
+			}
+			if (data->header.image_checksum != data->checksum) {
+				stm32prog_err("invalid checksum received (0x%x expected 0x%x)",
+					      data->checksum,
+					      data->header.image_checksum);
+				return -EIO;
+			}
+			printf("\n  checksum OK (0x%x)\n", data->checksum);
+		}
+
+		/* update DFU with received flashlayout */
+		if (data->phase == PHASE_FLASHLAYOUT)
+			stm32prog_dfu_init(data);
+	} else {
+		void (*entry)(void) = (void *)address;
+
+		printf("## Starting application at 0x%x ...\n", address);
+		(*entry)();
+		printf("## Application terminated\n");
+		ret = -ENOEXEC;
+	}
+
+	return ret;
+}
+
+/**
+ * get_address() - Get address if it is valid
+ *
+ * @tmp_xor:		Current xor value to update
+ * @return The address area
+ */
+static u32 get_address(u8 *tmp_xor)
+{
+	u32 address = 0x0;
+	u8 data;
+
+	data = stm32prog_serial_getc();
+	*tmp_xor ^= data;
+	address |= ((u32)data) << 24;
+
+	data = stm32prog_serial_getc();
+	address |= ((u32)data) << 16;
+	*tmp_xor ^= data;
+
+	data = stm32prog_serial_getc();
+	address |= ((u32)data) << 8;
+	*tmp_xor ^= data;
+
+	data = stm32prog_serial_getc();
+	address |= ((u32)data);
+	*tmp_xor ^= data;
+
+	return address;
+}
+
+static void stm32prog_serial_result(u8 result)
+{
+	/* always flush fifo before to send result */
+	stm32prog_serial_flush();
+	stm32prog_serial_putc(result);
+}
+
+/* Command -----------------------------------------------*/
+/**
+ * get_cmd_command() - Respond to Get command
+ *
+ * @data:		Current command context
+ */
+static void get_cmd_command(struct stm32prog_data *data)
+{
+	u32 counter = 0x0;
+
+	stm32prog_serial_putc(NB_CMD);
+	stm32prog_serial_putc(USART_BL_VERSION);
+
+	for (counter = 0; counter < NB_CMD; counter++)
+		stm32prog_serial_putc(cmd_id[counter]);
+
+	stm32prog_serial_result(ACK_BYTE);
+}
+
+/**
+ * get_version_command() - Respond to Get Version command
+ *
+ * @data:		Current command context
+ */
+static void get_version_command(struct stm32prog_data *data)
+{
+	stm32prog_serial_putc(UBOOT_BL_VERSION);
+	stm32prog_serial_result(ACK_BYTE);
+}
+
+/**
+ * get_id_command() - Respond to Get ID command
+ *
+ * @data:		Current command context
+ */
+static void get_id_command(struct stm32prog_data *data)
+{
+	/* Send Device IDCode */
+	stm32prog_serial_putc(0x1);
+	stm32prog_serial_putc(DEVICE_ID_BYTE1);
+	stm32prog_serial_putc(DEVICE_ID_BYTE2);
+	stm32prog_serial_result(ACK_BYTE);
+}
+
+/**
+ * get_phase_command() - Respond to Get phase
+ *
+ * @data:		Current command context
+ */
+static void get_phase_command(struct stm32prog_data *data)
+{
+	char *err_msg = NULL;
+	u8 i, length = 0;
+	u32 destination = DEFAULT_ADDRESS; /* destination address */
+	int phase = data->phase;
+
+	if (phase == PHASE_RESET || phase == PHASE_DO_RESET) {
+		err_msg = stm32prog_get_error(data);
+		length = strlen(err_msg);
+	}
+	if (phase == PHASE_FLASHLAYOUT)
+		destination = STM32_DDR_BASE;
+
+	stm32prog_serial_putc(length + 5);           /* Total length */
+	stm32prog_serial_putc(phase & 0xFF);         /* partition ID */
+	stm32prog_serial_putc(destination);          /* byte 1 of address */
+	stm32prog_serial_putc(destination >> 8);     /* byte 2 of address */
+	stm32prog_serial_putc(destination >> 16);    /* byte 3 of address */
+	stm32prog_serial_putc(destination >> 24);    /* byte 4 of address */
+
+	stm32prog_serial_putc(length);               /* Information length */
+	for (i = 0; i < length; i++)
+		stm32prog_serial_putc(err_msg[i]);
+	stm32prog_serial_result(ACK_BYTE);
+
+	if (phase == PHASE_RESET)
+		stm32prog_do_reset(data);
+}
+
+/**
+ * read_memory_command() - Read data from memory
+ *
+ * @data:		Current command context
+ */
+static void read_memory_command(struct stm32prog_data *data)
+{
+	u32 address = 0x0;
+	u8 rcv_data = 0x0, tmp_xor = 0x0;
+	u32 counter = 0x0;
+
+	/* Read memory address */
+	address = get_address(&tmp_xor);
+
+	/* If address memory is not received correctly */
+	rcv_data = stm32prog_serial_getc();
+	if (rcv_data != tmp_xor) {
+		stm32prog_serial_result(NACK_BYTE);
+		return;
+	}
+
+	stm32prog_serial_result(ACK_BYTE);
+
+	/* Read the number of bytes to be received:
+	 * Max NbrOfData = Data + 1 = 256
+	 */
+	rcv_data = stm32prog_serial_getc();
+	tmp_xor = ~rcv_data;
+	if (stm32prog_serial_getc() != tmp_xor) {
+		stm32prog_serial_result(NACK_BYTE);
+		return;
+	}
+
+	/* If checksum is correct send ACK */
+	stm32prog_serial_result(ACK_BYTE);
+
+	/* Send data to the host:
+	 * Number of data to read = data + 1
+	 */
+	for (counter = (rcv_data + 1); counter != 0; counter--)
+		stm32prog_serial_putc(*(u8 *)(address++));
+}
+
+/**
+ * start_command() - Respond to start command
+ *
+ * Jump to user application in RAM or partition check
+ *
+ * @data:		Current command context
+ */
+static void start_command(struct stm32prog_data *data)
+{
+	u32 address = 0;
+	u8 tmp_xor = 0x0;
+	u8 ret, rcv_data;
+
+	/* Read memory address */
+	address = get_address(&tmp_xor);
+
+	/* If address memory is not received correctly */
+	rcv_data = stm32prog_serial_getc();
+	if (rcv_data != tmp_xor) {
+		stm32prog_serial_result(NACK_BYTE);
+		return;
+	}
+	/* validate partition */
+	ret = stm32prog_start(data,
+			      address);
+
+	if (ret)
+		stm32prog_serial_result(ABORT_BYTE);
+	else
+		stm32prog_serial_result(ACK_BYTE);
+}
+
+/**
+ * download_command() - Respond to download command
+ *
+ * Write data to not volatile memory, Flash
+ *
+ * @data:		Current command context
+ */
+static void download_command(struct stm32prog_data *data)
+{
+	u32 address = 0x0;
+	u8 my_xor = 0x0;
+	u8 rcv_xor;
+	u32 counter = 0x0, codesize = 0x0;
+	u8 *ramaddress = 0;
+	u8 rcv_data = 0x0;
+	struct image_header_s *image_header = &data->header;
+	u32 cursor = data->cursor;
+	long size = 0;
+	u8 operation;
+	u32 packet_number;
+	u32 result = ACK_BYTE;
+	u8 ret;
+	unsigned int i;
+	bool error;
+	int rcv;
+
+	address = get_address(&my_xor);
+
+	/* If address memory is not received correctly */
+	rcv_xor = stm32prog_serial_getc();
+	if (rcv_xor != my_xor) {
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/* If address valid send ACK */
+	stm32prog_serial_result(ACK_BYTE);
+
+	/* get packet number and operation type */
+	operation = (u8)((u32)address >> 24);
+	packet_number = ((u32)(((u32)address << 8))) >> 8;
+
+	switch (operation) {
+	/* supported operation */
+	case PHASE_FLASHLAYOUT:
+	case PHASE_OTP:
+	case PHASE_PMIC:
+		break;
+	default:
+		result = NACK_BYTE;
+		goto end;
+	}
+	/* check the packet number */
+	if (packet_number == 0) {
+		/* erase: re-initialize the image_header struct */
+		data->packet_number = 0;
+		if (data->header_data)
+			memset(data->header_data, 0, BL_HEADER_SIZE);
+		else
+			data->header_data = calloc(1, BL_HEADER_SIZE);
+		cursor = 0;
+		data->cursor = 0;
+		data->checksum = 0;
+		/*idx = cursor;*/
+	} else {
+		data->packet_number++;
+	}
+
+	/* Check with the number of current packet if the device receive
+	 * the true packet
+	 */
+	if (packet_number != data->packet_number) {
+		data->packet_number--;
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/*-- Read number of bytes to be written and data -----------*/
+
+	/* Read the number of bytes to be written:
+	 * Max NbrOfData = data + 1 <= 256
+	 */
+	rcv_data = stm32prog_serial_getc();
+
+	/* NbrOfData to write = data + 1 */
+	codesize = rcv_data + 0x01;
+
+	if (codesize > USART_RAM_BUFFER_SIZE) {
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/* Checksum Initialization */
+	my_xor = rcv_data;
+
+	/* UART receive data and send to Buffer */
+	counter = codesize;
+	error = stm32prog_serial_get_buffer(data->buffer, &counter);
+
+	/* read checksum */
+	if (!error) {
+		rcv = stm32prog_serial_getc_err();
+		error = !!(rcv < 0);
+		rcv_xor = rcv;
+	}
+
+	if (error) {
+		printf("transmission error on packet %d, byte %d\n",
+		       packet_number, codesize - counter);
+		/* waiting end of packet before flush & NACK */
+		mdelay(30);
+		data->packet_number--;
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/* Compute Checksum */
+	ramaddress = data->buffer;
+	for (counter = codesize; counter != 0; counter--)
+		my_xor ^= *(ramaddress++);
+
+	/* If Checksum is incorrect */
+	if (rcv_xor != my_xor) {
+		printf("checksum error on packet %d\n",
+		       packet_number);
+		/* wait to be sure that all data are received
+		 * in the FIFO before flush
+		 */
+		mdelay(30);
+		data->packet_number--;
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/* Update current position in buffer */
+	data->cursor += codesize;
+
+	if (operation == PHASE_OTP) {
+		size = data->cursor - cursor;
+		/* no header for OTP */
+		if (stm32prog_otp_write(data, cursor,
+					data->buffer, &size))
+			result = ABORT_BYTE;
+		goto end;
+	}
+
+	if (operation == PHASE_PMIC) {
+		size = data->cursor - cursor;
+		/* no header for PMIC */
+		if (stm32prog_pmic_write(data, cursor,
+					 data->buffer, &size))
+			result = ABORT_BYTE;
+		goto end;
+	}
+
+	if (cursor < BL_HEADER_SIZE) {
+		/* size = portion of header in this chunck */
+		if (data->cursor >= BL_HEADER_SIZE)
+			size = BL_HEADER_SIZE - cursor;
+		else
+			size = data->cursor - cursor;
+		memcpy((void *)((u32)(data->header_data) + cursor),
+		       data->buffer, size);
+		cursor += size;
+
+		if (cursor == BL_HEADER_SIZE) {
+			/* Check and Write the header */
+			if (stm32prog_header(data)) {
+				result = ABORT_BYTE;
+				goto end;
+			}
+		} else {
+			goto end;
+		}
+	}
+
+	if (data->header.type == HEADER_STM32IMAGE) {
+		if (data->cursor <= BL_HEADER_SIZE)
+			goto end;
+		/* compute checksum on payload */
+		for (i = (unsigned long)size; i < codesize; i++)
+			data->checksum += data->buffer[i];
+
+		if (data->cursor >
+		    image_header->image_length + BL_HEADER_SIZE) {
+			log_err("expected size exceeded\n");
+			result = ABORT_BYTE;
+			goto end;
+		}
+
+		/* write data (payload) */
+		ret = stm32prog_write(data,
+				      &data->buffer[size],
+				      codesize - size);
+	} else {
+		/* write all */
+		ret = stm32prog_write(data,
+				      data->buffer,
+				      codesize);
+	}
+	if (ret)
+		result = ABORT_BYTE;
+
+end:
+	stm32prog_serial_result(result);
+}
+
+/**
+ * read_partition() - Respond to read command
+ *
+ * Read data from not volatile memory, Flash
+ *
+ * @data:		Current command context
+ */
+static void read_partition_command(struct stm32prog_data *data)
+{
+	u32 i, part_id, codesize, offset = 0, rcv_data;
+	long size;
+	u8 tmp_xor;
+	int res;
+	u8 buffer[256];
+
+	part_id = stm32prog_serial_getc();
+	tmp_xor = part_id;
+
+	offset = get_address(&tmp_xor);
+
+	rcv_data = stm32prog_serial_getc();
+	if (rcv_data != tmp_xor) {
+		log_debug("1st checksum received = %x, computed %x\n",
+			  rcv_data, tmp_xor);
+		goto error;
+	}
+	stm32prog_serial_putc(ACK_BYTE);
+
+	/* NbrOfData to read = data + 1 */
+	rcv_data = stm32prog_serial_getc();
+	codesize = rcv_data + 0x01;
+	tmp_xor = rcv_data;
+
+	rcv_data = stm32prog_serial_getc();
+	if ((rcv_data ^ tmp_xor) != 0xFF) {
+		log_debug("2nd checksum received = %x, computed %x\n",
+			  rcv_data, tmp_xor);
+		goto error;
+	}
+
+	log_debug("%s : %x\n", __func__, part_id);
+	rcv_data = 0;
+	switch (part_id) {
+	case PHASE_OTP:
+		size = codesize;
+		if (!stm32prog_otp_read(data, offset, buffer, &size))
+			rcv_data = size;
+		break;
+	case PHASE_PMIC:
+		size = codesize;
+		if (!stm32prog_pmic_read(data, offset, buffer, &size))
+			rcv_data = size;
+		break;
+	default:
+		res = stm32prog_read(data, part_id, offset,
+				     buffer, codesize);
+		if (res > 0)
+			rcv_data = res;
+		break;
+	}
+	if (rcv_data > 0) {
+		stm32prog_serial_putc(ACK_BYTE);
+		/*----------- Send data to the host -----------*/
+		for (i = 0; i < rcv_data; i++)
+			stm32prog_serial_putc(buffer[i]);
+		/*----------- Send filler to the host -----------*/
+		for (; i < codesize; i++)
+			stm32prog_serial_putc(0x0);
+		return;
+	}
+	stm32prog_serial_result(ABORT_BYTE);
+	return;
+
+error:
+	stm32prog_serial_result(NACK_BYTE);
+}
+
+/* MAIN function = SERIAL LOOP ***********************************************/
+
+/**
+ * stm32prog_serial_loop() - USART bootloader Loop routine
+ *
+ * @data:		Current command context
+ * @return true if reset is needed after loop
+ */
+bool stm32prog_serial_loop(struct stm32prog_data *data)
+{
+	u32 counter = 0x0;
+	u8 command = 0x0;
+	u8 found;
+	int phase = data->phase;
+
+	/* element of cmd_func need to aligned with cmd_id[]*/
+	void (*cmd_func[NB_CMD])(struct stm32prog_data *) = {
+		/* GET_CMD_COMMAND */	get_cmd_command,
+		/* GET_VER_COMMAND */	get_version_command,
+		/* GET_ID_COMMAND */	get_id_command,
+		/* GET_PHASE_COMMAND */	get_phase_command,
+		/* RM_COMMAND */	read_memory_command,
+		/* READ_PART_COMMAND */	read_partition_command,
+		/* START_COMMAND */	start_command,
+		/* DOWNLOAD_COMMAND */	download_command
+	};
+
+	/* flush and NACK pending command received during u-boot init
+	 * request command reemit
+	 */
+	stm32prog_serial_result(NACK_BYTE);
+
+	clear_ctrlc(); /* forget any previous Control C */
+	while (!had_ctrlc()) {
+		phase = data->phase;
+
+		if (phase == PHASE_DO_RESET)
+			return true;
+
+		/* Get the user command: read first byte */
+		command = stm32prog_serial_getc();
+
+		if (command == INIT_BYTE) {
+			puts("\nConnected\n");
+			stm32prog_serial_result(ACK_BYTE);
+			continue;
+		}
+
+		found = 0;
+		for (counter = 0; counter < NB_CMD; counter++)
+			if (cmd_id[counter] == command) {
+				found = 1;
+				break;
+			}
+		if (found)
+			if ((command ^ stm32prog_serial_getc()) != 0xFF)
+				found = 0;
+		if (!found) {
+			/* wait to be sure that all data are received
+			 * in the FIFO before flush (CMD and XOR)
+			 */
+			mdelay(3);
+			stm32prog_serial_result(NACK_BYTE);
+		} else {
+			stm32prog_serial_result(ACK_BYTE);
+			cmd_func[counter](data);
+		}
+		WATCHDOG_RESET();
+	}
+
+	/* clean device */
+	if (gd->cur_serial_dev == down_serial_dev) {
+		/* restore console on uart */
+		gd->flags &= ~(GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT);
+	}
+	down_serial_dev = NULL;
+
+	return false; /* no reset after ctrlc */
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
new file mode 100644
index 000000000..bc44d9fc8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <dfu.h>
+#include <g_dnl.h>
+#include <usb.h>
+#include <asm/arch/stm32prog.h>
+#include <asm/arch/sys_proto.h>
+#include "stm32prog.h"
+
+static int stm32prog_set_phase(struct stm32prog_data *data, u8 phase,
+			       u32 offset)
+{
+	struct stm32prog_part_t *part;
+	int i;
+
+	if (phase == data->phase) {
+		data->offset = offset;
+		data->dfu_seq = 0;
+		return 0;
+	}
+
+	/* found partition for phase */
+	for (i = 0; i < data->part_nb; i++) {
+		part = &data->part_array[i];
+		if (part->id == phase) {
+			data->cur_part = part;
+			data->phase = phase;
+			data->offset = offset;
+			data->dfu_seq = 0;
+			return 0;
+		}
+	}
+
+	return  -EINVAL;
+}
+
+static int stm32prog_cmd_write(u64 offset, void *buf, long *len)
+{
+	u8 phase;
+	u32 address;
+	u8 *pt = buf;
+	void (*entry)(void);
+	int ret;
+
+	if (*len < 5) {
+		log_err("size not allowed\n");
+		return  -EINVAL;
+	}
+	if (offset) {
+		log_err("invalid offset\n");
+		return  -EINVAL;
+	}
+	phase = pt[0];
+	address = (pt[1] << 24) | (pt[2] << 16) | (pt[3] << 8) | pt[4];
+	if (phase == PHASE_RESET) {
+		entry = (void *)address;
+		printf("## Starting application at 0x%x ...\n", address);
+		(*entry)();
+		printf("## Application terminated\n");
+		return 0;
+	}
+	/* set phase and offset */
+	ret = stm32prog_set_phase(stm32prog_data, phase, address);
+	if (ret)
+		log_err("failed: %d\n", ret);
+	return ret;
+}
+
+#define PHASE_MIN_SIZE	9
+static int stm32prog_cmd_read(u64 offset, void *buf, long *len)
+{
+	u32 destination = DEFAULT_ADDRESS; /* destination address */
+	u32 dfu_offset;
+	u8 *pt_buf = buf;
+	int phase;
+	char *err_msg;
+	int length;
+
+	if (*len < PHASE_MIN_SIZE) {
+		log_err("request exceeds allowed area\n");
+		return  -EINVAL;
+	}
+	if (offset) {
+		*len = 0; /* EOF for second request */
+		return 0;
+	}
+	phase = stm32prog_data->phase;
+	if (phase == PHASE_FLASHLAYOUT)
+		destination = STM32_DDR_BASE;
+	dfu_offset = stm32prog_data->offset;
+
+	/* mandatory header, size = PHASE_MIN_SIZE */
+	*pt_buf++ = (u8)(phase & 0xFF);
+	*pt_buf++ = (u8)(destination);
+	*pt_buf++ = (u8)(destination >> 8);
+	*pt_buf++ = (u8)(destination >> 16);
+	*pt_buf++ = (u8)(destination >> 24);
+	*pt_buf++ = (u8)(dfu_offset);
+	*pt_buf++ = (u8)(dfu_offset >> 8);
+	*pt_buf++ = (u8)(dfu_offset >> 16);
+	*pt_buf++ = (u8)(dfu_offset >> 24);
+
+	if (phase == PHASE_RESET || phase == PHASE_DO_RESET) {
+		err_msg = stm32prog_get_error(stm32prog_data);
+		length = strlen(err_msg);
+		if (length + PHASE_MIN_SIZE > *len)
+			length = *len - PHASE_MIN_SIZE;
+
+		memcpy(pt_buf, err_msg, length);
+		*len = PHASE_MIN_SIZE + length;
+		stm32prog_do_reset(stm32prog_data);
+	} else if (phase == PHASE_FLASHLAYOUT) {
+		*pt_buf++ = stm32prog_data->part_nb ? 1 : 0;
+		*len = PHASE_MIN_SIZE + 1;
+	} else {
+		*len = PHASE_MIN_SIZE;
+	}
+
+	return 0;
+}
+
+int stm32prog_write_medium_virt(struct dfu_entity *dfu, u64 offset,
+				void *buf, long *len)
+{
+	if (dfu->dev_type != DFU_DEV_VIRT)
+		return -EINVAL;
+
+	switch (dfu->data.virt.dev_num) {
+	case PHASE_CMD:
+		return stm32prog_cmd_write(offset, buf, len);
+
+	case PHASE_OTP:
+		return stm32prog_otp_write(stm32prog_data, (u32)offset,
+					   buf, len);
+
+	case PHASE_PMIC:
+		return stm32prog_pmic_write(stm32prog_data, (u32)offset,
+					    buf, len);
+	}
+	*len = 0;
+	return 0;
+}
+
+int stm32prog_read_medium_virt(struct dfu_entity *dfu, u64 offset,
+			       void *buf, long *len)
+{
+	if (dfu->dev_type != DFU_DEV_VIRT)
+		return -EINVAL;
+
+	switch (dfu->data.virt.dev_num) {
+	case PHASE_CMD:
+		return stm32prog_cmd_read(offset, buf, len);
+
+	case PHASE_OTP:
+		return stm32prog_otp_read(stm32prog_data, (u32)offset,
+					  buf, len);
+
+	case PHASE_PMIC:
+		return stm32prog_pmic_read(stm32prog_data, (u32)offset,
+					   buf, len);
+	}
+	*len = 0;
+	return 0;
+}
+
+int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size)
+{
+	if (dfu->dev_type != DFU_DEV_VIRT) {
+		*size = 0;
+		log_debug("%s, invalid dev_type = %d\n",
+			  __func__, dfu->dev_type);
+		return -EINVAL;
+	}
+
+	switch (dfu->data.virt.dev_num) {
+	case PHASE_CMD:
+		*size = 512;
+		break;
+	case PHASE_OTP:
+		*size = OTP_SIZE;
+		break;
+	case PHASE_PMIC:
+		*size = PMIC_SIZE;
+		break;
+	}
+
+	return 0;
+}
+
+bool stm32prog_usb_loop(struct stm32prog_data *data, int dev)
+{
+	int ret;
+	bool result;
+	/* USB download gadget for STM32 Programmer */
+	char product[128];
+	char name[SOC_NAME_SIZE];
+
+	get_soc_name(name);
+	snprintf(product, sizeof(product),
+		 "USB download gadget@Device ID /0x%03X, @Revision ID /0x%04X, @Name /%s,",
+		 get_cpu_dev(), get_cpu_rev(), name);
+	g_dnl_set_product(product);
+
+	if (stm32prog_data->phase == PHASE_FLASHLAYOUT) {
+		ret = run_usb_dnl_gadget(dev, "usb_dnl_dfu");
+		if (ret || stm32prog_data->phase == PHASE_DO_RESET)
+			return ret;
+		/* prepare the second enumeration with the FlashLayout */
+		if (stm32prog_data->phase == PHASE_FLASHLAYOUT)
+			stm32prog_dfu_init(data);
+		/* found next selected partition */
+		stm32prog_next_phase(data);
+	}
+
+	ret = run_usb_dnl_gadget(dev, "usb_dnl_dfu");
+
+	result = !!(ret) || (stm32prog_data->phase == PHASE_DO_RESET);
+
+	g_dnl_set_product(NULL);
+
+	return result;
+}
+
+int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+	log_debug("%s\n", __func__);
+	return 0x200;
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/config.mk b/roms/u-boot/arch/arm/mach-stm32mp/config.mk
new file mode 100644
index 000000000..c30bf482f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/config.mk
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+#
+# Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+#
+
+ifndef CONFIG_SPL
+INPUTS-y += u-boot.stm32
+else
+ifdef CONFIG_SPL_BUILD
+INPUTS-y += u-boot-spl.stm32
+endif
+endif
+
+MKIMAGEFLAGS_u-boot.stm32 = -T stm32image -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+
+u-boot.stm32: MKIMAGEOUTPUT = u-boot.stm32.log
+
+u-boot.stm32: u-boot.bin FORCE
+	$(call if_changed,mkimage)
+
+MKIMAGEFLAGS_u-boot-spl.stm32 = -T stm32image -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE)
+
+spl/u-boot-spl.stm32: MKIMAGEOUTPUT = spl/u-boot-spl.stm32.log
+
+spl/u-boot-spl.stm32: spl/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+
+u-boot-spl.stm32 : spl/u-boot-spl.stm32
+	$(call if_changed,copy)
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/cpu.c b/roms/u-boot/arch/arm/mach-stm32mp/cpu.c
new file mode 100644
index 000000000..8115d58b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/cpu.c
@@ -0,0 +1,657 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY LOGC_ARCH
+
+#include <common.h>
+#include <clk.h>
+#include <cpu_func.h>
+#include <debug_uart.h>
+#include <env.h>
+#include <init.h>
+#include <log.h>
+#include <misc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/bsec.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <linux/bitops.h>
+
+/* RCC register */
+#define RCC_TZCR		(STM32_RCC_BASE + 0x00)
+#define RCC_DBGCFGR		(STM32_RCC_BASE + 0x080C)
+#define RCC_BDCR		(STM32_RCC_BASE + 0x0140)
+#define RCC_MP_APB5ENSETR	(STM32_RCC_BASE + 0x0208)
+#define RCC_MP_AHB5ENSETR	(STM32_RCC_BASE + 0x0210)
+#define RCC_BDCR_VSWRST		BIT(31)
+#define RCC_BDCR_RTCSRC		GENMASK(17, 16)
+#define RCC_DBGCFGR_DBGCKEN	BIT(8)
+
+/* Security register */
+#define ETZPC_TZMA1_SIZE	(STM32_ETZPC_BASE + 0x04)
+#define ETZPC_DECPROT0		(STM32_ETZPC_BASE + 0x10)
+
+#define TZC_GATE_KEEPER		(STM32_TZC_BASE + 0x008)
+#define TZC_REGION_ATTRIBUTE0	(STM32_TZC_BASE + 0x110)
+#define TZC_REGION_ID_ACCESS0	(STM32_TZC_BASE + 0x114)
+
+#define TAMP_CR1		(STM32_TAMP_BASE + 0x00)
+
+#define PWR_CR1			(STM32_PWR_BASE + 0x00)
+#define PWR_MCUCR		(STM32_PWR_BASE + 0x14)
+#define PWR_CR1_DBP		BIT(8)
+#define PWR_MCUCR_SBF		BIT(6)
+
+/* DBGMCU register */
+#define DBGMCU_IDC		(STM32_DBGMCU_BASE + 0x00)
+#define DBGMCU_APB4FZ1		(STM32_DBGMCU_BASE + 0x2C)
+#define DBGMCU_APB4FZ1_IWDG2	BIT(2)
+#define DBGMCU_IDC_DEV_ID_MASK	GENMASK(11, 0)
+#define DBGMCU_IDC_DEV_ID_SHIFT	0
+#define DBGMCU_IDC_REV_ID_MASK	GENMASK(31, 16)
+#define DBGMCU_IDC_REV_ID_SHIFT	16
+
+/* GPIOZ registers */
+#define GPIOZ_SECCFGR		0x54004030
+
+/* boot interface from Bootrom
+ * - boot instance = bit 31:16
+ * - boot device = bit 15:0
+ */
+#define BOOTROM_PARAM_ADDR	0x2FFC0078
+#define BOOTROM_MODE_MASK	GENMASK(15, 0)
+#define BOOTROM_MODE_SHIFT	0
+#define BOOTROM_INSTANCE_MASK	 GENMASK(31, 16)
+#define BOOTROM_INSTANCE_SHIFT	16
+
+/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
+#define RPN_SHIFT	0
+#define RPN_MASK	GENMASK(7, 0)
+
+/* Package = bit 27:29 of OTP16
+ * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
+ * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
+ * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
+ * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
+ * - others: Reserved
+ */
+#define PKG_SHIFT	27
+#define PKG_MASK	GENMASK(2, 0)
+
+/*
+ * early TLB into the .data section so that it not get cleared
+ * with 16kB allignment (see TTBR0_BASE_ADDR_MASK)
+ */
+u8 early_tlb[PGTABLE_SIZE] __section(".data") __aligned(0x4000);
+
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#ifndef CONFIG_TFABOOT
+static void security_init(void)
+{
+	/* Disable the backup domain write protection */
+	/* the protection is enable at each reset by hardware */
+	/* And must be disable by software */
+	setbits_le32(PWR_CR1, PWR_CR1_DBP);
+
+	while (!(readl(PWR_CR1) & PWR_CR1_DBP))
+		;
+
+	/* If RTC clock isn't enable so this is a cold boot then we need
+	 * to reset the backup domain
+	 */
+	if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
+		setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
+		while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
+			;
+		clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
+	}
+
+	/* allow non secure access in Write/Read for all peripheral */
+	writel(GENMASK(25, 0), ETZPC_DECPROT0);
+
+	/* Open SYSRAM for no secure access */
+	writel(0x0, ETZPC_TZMA1_SIZE);
+
+	/* enable TZC1 TZC2 clock */
+	writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
+
+	/* Region 0 set to no access by default */
+	/* bit 0 / 16 => nsaid0 read/write Enable
+	 * bit 1 / 17 => nsaid1 read/write Enable
+	 * ...
+	 * bit 15 / 31 => nsaid15 read/write Enable
+	 */
+	writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
+	/* bit 30 / 31 => Secure Global Enable : write/read */
+	/* bit 0 / 1 => Region Enable for filter 0/1 */
+	writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
+
+	/* Enable Filter 0 and 1 */
+	setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
+
+	/* RCC trust zone deactivated */
+	writel(0x0, RCC_TZCR);
+
+	/* TAMP: deactivate the internal tamper
+	 * Bit 23 ITAMP8E: monotonic counter overflow
+	 * Bit 20 ITAMP5E: RTC calendar overflow
+	 * Bit 19 ITAMP4E: HSE monitoring
+	 * Bit 18 ITAMP3E: LSE monitoring
+	 * Bit 16 ITAMP1E: RTC power domain supply monitoring
+	 */
+	writel(0x0, TAMP_CR1);
+
+	/* GPIOZ: deactivate the security */
+	writel(BIT(0), RCC_MP_AHB5ENSETR);
+	writel(0x0, GPIOZ_SECCFGR);
+}
+#endif /* CONFIG_TFABOOT */
+
+/*
+ * Debug init
+ */
+static void dbgmcu_init(void)
+{
+	/*
+	 * Freeze IWDG2 if Cortex-A7 is in debug mode
+	 * done in TF-A for TRUSTED boot and
+	 * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE
+	*/
+	if (!IS_ENABLED(CONFIG_TFABOOT) && bsec_dbgswenable()) {
+		setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
+		setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
+	}
+}
+
+void spl_board_init(void)
+{
+	dbgmcu_init();
+}
+#endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */
+
+#if !defined(CONFIG_TFABOOT) && \
+	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
+/* get bootmode from ROM code boot context: saved in TAMP register */
+static void update_bootmode(void)
+{
+	u32 boot_mode;
+	u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
+	u32 bootrom_device, bootrom_instance;
+
+	/* enable TAMP clock = RTCAPBEN */
+	writel(BIT(8), RCC_MP_APB5ENSETR);
+
+	/* read bootrom context */
+	bootrom_device =
+		(bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
+	bootrom_instance =
+		(bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
+	boot_mode =
+		((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
+		((bootrom_instance << BOOT_INSTANCE_SHIFT) &
+		 BOOT_INSTANCE_MASK);
+
+	/* save the boot mode in TAMP backup register */
+	clrsetbits_le32(TAMP_BOOT_CONTEXT,
+			TAMP_BOOT_MODE_MASK,
+			boot_mode << TAMP_BOOT_MODE_SHIFT);
+}
+#endif
+
+u32 get_bootmode(void)
+{
+	/* read bootmode from TAMP backup register */
+	return (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
+		    TAMP_BOOT_MODE_SHIFT;
+}
+
+/*
+ * weak function overidde: set the DDR/SYSRAM executable before to enable the
+ * MMU and configure DACR, for early early_enable_caches (SPL or pre-reloc)
+ */
+void dram_bank_mmu_setup(int bank)
+{
+	struct bd_info *bd = gd->bd;
+	int	i;
+	phys_addr_t start;
+	phys_size_t size;
+
+	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+		start = ALIGN_DOWN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE);
+		size = ALIGN(STM32_SYSRAM_SIZE, MMU_SECTION_SIZE);
+	} else if (gd->flags & GD_FLG_RELOC) {
+		/* bd->bi_dram is available only after relocation */
+		start = bd->bi_dram[bank].start;
+		size =  bd->bi_dram[bank].size;
+	} else {
+		/* mark cacheable and executable the beggining of the DDR */
+		start = STM32_DDR_BASE;
+		size = CONFIG_DDR_CACHEABLE_SIZE;
+	}
+
+	for (i = start >> MMU_SECTION_SHIFT;
+	     i < (start >> MMU_SECTION_SHIFT) + (size >> MMU_SECTION_SHIFT);
+	     i++)
+		set_section_dcache(i, DCACHE_DEFAULT_OPTION);
+}
+/*
+ * initialize the MMU and activate cache in SPL or in U-Boot pre-reloc stage
+ * MMU/TLB is updated in enable_caches() for U-Boot after relocation
+ * or is deactivated in U-Boot entry function start.S::cpu_init_cp15
+ */
+static void early_enable_caches(void)
+{
+	/* I-cache is already enabled in start.S: cpu_init_cp15 */
+
+	if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+		return;
+
+	if (!(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))) {
+		gd->arch.tlb_size = PGTABLE_SIZE;
+		gd->arch.tlb_addr = (unsigned long)&early_tlb;
+	}
+
+	/* enable MMU (default configuration) */
+	dcache_enable();
+}
+
+/*
+ * Early system init
+ */
+int arch_cpu_init(void)
+{
+	u32 boot_mode;
+
+	early_enable_caches();
+
+	/* early armv7 timer init: needed for polling */
+	timer_init();
+
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#ifndef CONFIG_TFABOOT
+	security_init();
+	update_bootmode();
+#endif
+	/* Reset Coprocessor state unless it wakes up from Standby power mode */
+	if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
+		writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
+		writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
+	}
+#endif
+
+	boot_mode = get_bootmode();
+
+	if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) &&
+	    (boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
+		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+#if defined(CONFIG_DEBUG_UART) && \
+	!defined(CONFIG_TFABOOT) && \
+	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
+	else
+		debug_uart_init();
+#endif
+
+	return 0;
+}
+
+void enable_caches(void)
+{
+	/* I-cache is already enabled in start.S: icache_enable() not needed */
+
+	/* deactivate the data cache, early enabled in arch_cpu_init() */
+	dcache_disable();
+	/*
+	 * update MMU after relocation and enable the data cache
+	 * warning: the TLB location udpated in board_f.c::reserve_mmu
+	 */
+	dcache_enable();
+}
+
+static u32 read_idc(void)
+{
+	/* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */
+	if (bsec_dbgswenable()) {
+		setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
+
+		return readl(DBGMCU_IDC);
+	}
+
+	if (CONFIG_IS_ENABLED(STM32MP15x))
+		return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */
+	else
+		return 0x0;
+}
+
+u32 get_cpu_dev(void)
+{
+	return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
+}
+
+u32 get_cpu_rev(void)
+{
+	return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
+}
+
+static u32 get_otp(int index, int shift, int mask)
+{
+	int ret;
+	struct udevice *dev;
+	u32 otp = 0;
+
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(stm32mp_bsec),
+					  &dev);
+
+	if (!ret)
+		ret = misc_read(dev, STM32_BSEC_SHADOW(index),
+				&otp, sizeof(otp));
+
+	return (otp >> shift) & mask;
+}
+
+/* Get Device Part Number (RPN) from OTP */
+static u32 get_cpu_rpn(void)
+{
+	return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
+}
+
+u32 get_cpu_type(void)
+{
+	return (get_cpu_dev() << 16) | get_cpu_rpn();
+}
+
+/* Get Package options from OTP */
+u32 get_cpu_package(void)
+{
+	return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
+}
+
+static const char * const soc_type[] = {
+	"????",
+	"151C", "151A", "151F", "151D",
+	"153C", "153A", "153F", "153D",
+	"157C", "157A", "157F", "157D"
+};
+
+static const char * const soc_pkg[] = { "??", "AD", "AC", "AB", "AA" };
+static const char * const soc_rev[] = { "?", "A", "B", "Z" };
+
+static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
+				   unsigned int *rev)
+{
+	u32 cpu_type = get_cpu_type();
+	u32 ct = cpu_type & ~(BIT(7) | BIT(0));
+	u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0));
+	u32 cp = get_cpu_package();
+
+	/* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */
+	switch (ct) {
+	case CPU_STM32MP151Cxx:
+		*type = cm + 1;
+		break;
+	case CPU_STM32MP153Cxx:
+		*type = cm + 5;
+		break;
+	case CPU_STM32MP157Cxx:
+		*type = cm + 9;
+		break;
+	default:
+		*type = 0;
+		break;
+	}
+
+	/* Package */
+	switch (cp) {
+	case PKG_AA_LBGA448:
+	case PKG_AB_LBGA354:
+	case PKG_AC_TFBGA361:
+	case PKG_AD_TFBGA257:
+		*pkg = cp;
+		break;
+	default:
+		*pkg = 0;
+		break;
+	}
+
+	/* Revision */
+	switch (get_cpu_rev()) {
+	case CPU_REVA:
+		*rev = 1;
+		break;
+	case CPU_REVB:
+		*rev = 2;
+		break;
+	case CPU_REVZ:
+		*rev = 3;
+		break;
+	default:
+		*rev = 0;
+		break;
+	}
+}
+
+void get_soc_name(char name[SOC_NAME_SIZE])
+{
+	unsigned int type, pkg, rev;
+
+	get_cpu_string_offsets(&type, &pkg, &rev);
+
+	snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s",
+		 soc_type[type], soc_pkg[pkg], soc_rev[rev]);
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char name[SOC_NAME_SIZE];
+
+	get_soc_name(name);
+	printf("CPU: %s\n", name);
+
+	return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+static void setup_boot_mode(void)
+{
+	const u32 serial_addr[] = {
+		STM32_USART1_BASE,
+		STM32_USART2_BASE,
+		STM32_USART3_BASE,
+		STM32_UART4_BASE,
+		STM32_UART5_BASE,
+		STM32_USART6_BASE,
+		STM32_UART7_BASE,
+		STM32_UART8_BASE
+	};
+	char cmd[60];
+	u32 boot_ctx = readl(TAMP_BOOT_CONTEXT);
+	u32 boot_mode =
+		(boot_ctx & TAMP_BOOT_MODE_MASK) >> TAMP_BOOT_MODE_SHIFT;
+	unsigned int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1;
+	u32 forced_mode = (boot_ctx & TAMP_BOOT_FORCED_MASK);
+	struct udevice *dev;
+
+	log_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n",
+		  __func__, boot_ctx, boot_mode, instance, forced_mode);
+	switch (boot_mode & TAMP_BOOT_DEVICE_MASK) {
+	case BOOT_SERIAL_UART:
+		if (instance > ARRAY_SIZE(serial_addr))
+			break;
+		/* serial : search associated node in devicetree */
+		sprintf(cmd, "serial@%x", serial_addr[instance]);
+		if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev)) {
+			/* restore console on error */
+			if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL))
+				gd->flags &= ~(GD_FLG_SILENT |
+					       GD_FLG_DISABLE_CONSOLE);
+			log_err("uart%d = %s not found in device tree!\n",
+				instance + 1, cmd);
+			break;
+		}
+		sprintf(cmd, "%d", dev_seq(dev));
+		env_set("boot_device", "serial");
+		env_set("boot_instance", cmd);
+
+		/* restore console on uart when not used */
+		if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && gd->cur_serial_dev != dev) {
+			gd->flags &= ~(GD_FLG_SILENT |
+				       GD_FLG_DISABLE_CONSOLE);
+			log_info("serial boot with console enabled!\n");
+		}
+		break;
+	case BOOT_SERIAL_USB:
+		env_set("boot_device", "usb");
+		env_set("boot_instance", "0");
+		break;
+	case BOOT_FLASH_SD:
+	case BOOT_FLASH_EMMC:
+		sprintf(cmd, "%d", instance);
+		env_set("boot_device", "mmc");
+		env_set("boot_instance", cmd);
+		break;
+	case BOOT_FLASH_NAND:
+		env_set("boot_device", "nand");
+		env_set("boot_instance", "0");
+		break;
+	case BOOT_FLASH_SPINAND:
+		env_set("boot_device", "spi-nand");
+		env_set("boot_instance", "0");
+		break;
+	case BOOT_FLASH_NOR:
+		env_set("boot_device", "nor");
+		env_set("boot_instance", "0");
+		break;
+	default:
+		log_debug("unexpected boot mode = %x\n", boot_mode);
+		break;
+	}
+
+	switch (forced_mode) {
+	case BOOT_FASTBOOT:
+		log_info("Enter fastboot!\n");
+		env_set("preboot", "env set preboot; fastboot 0");
+		break;
+	case BOOT_STM32PROG:
+		env_set("boot_device", "usb");
+		env_set("boot_instance", "0");
+		break;
+	case BOOT_UMS_MMC0:
+	case BOOT_UMS_MMC1:
+	case BOOT_UMS_MMC2:
+		log_info("Enter UMS!\n");
+		instance = forced_mode - BOOT_UMS_MMC0;
+		sprintf(cmd, "env set preboot; ums 0 mmc %d", instance);
+		env_set("preboot", cmd);
+		break;
+	case BOOT_RECOVERY:
+		env_set("preboot", "env set preboot; run altbootcmd");
+		break;
+	case BOOT_NORMAL:
+		break;
+	default:
+		log_debug("unexpected forced boot mode = %x\n", forced_mode);
+		break;
+	}
+
+	/* clear TAMP for next reboot */
+	clrsetbits_le32(TAMP_BOOT_CONTEXT, TAMP_BOOT_FORCED_MASK, BOOT_NORMAL);
+}
+
+/*
+ * If there is no MAC address in the environment, then it will be initialized
+ * (silently) from the value in the OTP.
+ */
+__weak int setup_mac_address(void)
+{
+#if defined(CONFIG_NET)
+	int ret;
+	int i;
+	u32 otp[2];
+	uchar enetaddr[6];
+	struct udevice *dev;
+
+	/* MAC already in environment */
+	if (eth_env_get_enetaddr("ethaddr", enetaddr))
+		return 0;
+
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(stm32mp_bsec),
+					  &dev);
+	if (ret)
+		return ret;
+
+	ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_MAC),
+			otp, sizeof(otp));
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < 6; i++)
+		enetaddr[i] = ((uint8_t *)&otp)[i];
+
+	if (!is_valid_ethaddr(enetaddr)) {
+		log_err("invalid MAC address in OTP %pM\n", enetaddr);
+		return -EINVAL;
+	}
+	log_debug("OTP MAC address = %pM\n", enetaddr);
+	ret = eth_env_set_enetaddr("ethaddr", enetaddr);
+	if (ret)
+		log_err("Failed to set mac address %pM from OTP: %d\n", enetaddr, ret);
+#endif
+
+	return 0;
+}
+
+static int setup_serial_number(void)
+{
+	char serial_string[25];
+	u32 otp[3] = {0, 0, 0 };
+	struct udevice *dev;
+	int ret;
+
+	if (env_get("serial#"))
+		return 0;
+
+	ret = uclass_get_device_by_driver(UCLASS_MISC,
+					  DM_DRIVER_GET(stm32mp_bsec),
+					  &dev);
+	if (ret)
+		return ret;
+
+	ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_SERIAL),
+			otp, sizeof(otp));
+	if (ret < 0)
+		return ret;
+
+	sprintf(serial_string, "%08X%08X%08X", otp[0], otp[1], otp[2]);
+	env_set("serial#", serial_string);
+
+	return 0;
+}
+
+static void setup_soc_type_pkg_rev(void)
+{
+	unsigned int type, pkg, rev;
+
+	get_cpu_string_offsets(&type, &pkg, &rev);
+
+	env_set("soc_type", soc_type[type]);
+	env_set("soc_pkg", soc_pkg[pkg]);
+	env_set("soc_rev", soc_rev[rev]);
+}
+
+int arch_misc_init(void)
+{
+	setup_boot_mode();
+	setup_mac_address();
+	setup_serial_number();
+	setup_soc_type_pkg_rev();
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/dram_init.c b/roms/u-boot/arch/arm/mach-stm32mp/dram_init.c
new file mode 100644
index 000000000..66e81bacc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/dram_init.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY LOGC_ARCH
+
+#include <common.h>
+#include <dm.h>
+#include <image.h>
+#include <init.h>
+#include <lmb.h>
+#include <log.h>
+#include <ram.h>
+#include <asm/global_data.h>
+#include <asm/system.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	struct ram_info ram;
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		log_debug("RAM init failed: %d\n", ret);
+		return ret;
+	}
+	ret = ram_get_info(dev, &ram);
+	if (ret) {
+		log_debug("Cannot get RAM size: %d\n", ret);
+		return ret;
+	}
+	log_debug("RAM init base=%lx, size=%x\n", ram.base, ram.size);
+
+	gd->ram_size = ram.size;
+
+	return 0;
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	phys_size_t size;
+	phys_addr_t reg;
+	struct lmb lmb;
+
+	/* found enough not-reserved memory to relocated U-Boot */
+	lmb_init(&lmb);
+	lmb_add(&lmb, gd->ram_base, gd->ram_size);
+	boot_fdt_add_mem_rsv_regions(&lmb, (void *)gd->fdt_blob);
+	size = ALIGN(CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE),
+	reg = lmb_alloc(&lmb, size, MMU_SECTION_SIZE);
+
+	if (!reg)
+		reg = gd->ram_top - size;
+
+	mmu_set_region_dcache_behaviour(reg, size, DCACHE_DEFAULT_OPTION);
+
+	return reg + size;
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/fdt.c b/roms/u-boot/arch/arm/mach-stm32mp/fdt.c
new file mode 100644
index 000000000..ce2fe0206
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/fdt.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019-2020, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY LOGC_ARCH
+
+#include <common.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
+#include <log.h>
+#include <tee.h>
+#include <asm/arch/sys_proto.h>
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <linux/io.h>
+
+#define ETZPC_DECPROT(n)	(STM32_ETZPC_BASE + 0x10 + 4 * (n))
+#define ETZPC_DECPROT_NB	6
+
+#define DECPROT_MASK		0x03
+#define NB_PROT_PER_REG		0x10
+#define DECPROT_NB_BITS		2
+
+#define DECPROT_SECURED		0x00
+#define DECPROT_WRITE_SECURE	0x01
+#define DECPROT_MCU_ISOLATION	0x02
+#define DECPROT_NON_SECURED	0x03
+
+#define ETZPC_RESERVED		0xffffffff
+
+#define STM32_FDCAN_BASE	0x4400e000
+#define STM32_CRYP2_BASE	0x4c005000
+#define STM32_CRYP1_BASE	0x54001000
+#define STM32_GPU_BASE		0x59000000
+#define STM32_DSI_BASE		0x5a000000
+
+static const u32 stm32mp1_ip_addr[] = {
+	0x5c008000,	/* 00 stgenc */
+	0x54000000,	/* 01 bkpsram */
+	0x5c003000,	/* 02 iwdg1 */
+	0x5c000000,	/* 03 usart1 */
+	0x5c001000,	/* 04 spi6 */
+	0x5c002000,	/* 05 i2c4 */
+	ETZPC_RESERVED,	/* 06 reserved */
+	0x54003000,	/* 07 rng1 */
+	0x54002000,	/* 08 hash1 */
+	STM32_CRYP1_BASE,	/* 09 cryp1 */
+	0x5a003000,	/* 0A ddrctrl */
+	0x5a004000,	/* 0B ddrphyc */
+	0x5c009000,	/* 0C i2c6 */
+	ETZPC_RESERVED,	/* 0D reserved */
+	ETZPC_RESERVED,	/* 0E reserved */
+	ETZPC_RESERVED,	/* 0F reserved */
+	0x40000000,	/* 10 tim2 */
+	0x40001000,	/* 11 tim3 */
+	0x40002000,	/* 12 tim4 */
+	0x40003000,	/* 13 tim5 */
+	0x40004000,	/* 14 tim6 */
+	0x40005000,	/* 15 tim7 */
+	0x40006000,	/* 16 tim12 */
+	0x40007000,	/* 17 tim13 */
+	0x40008000,	/* 18 tim14 */
+	0x40009000,	/* 19 lptim1 */
+	0x4000a000,	/* 1A wwdg1 */
+	0x4000b000,	/* 1B spi2 */
+	0x4000c000,	/* 1C spi3 */
+	0x4000d000,	/* 1D spdifrx */
+	0x4000e000,	/* 1E usart2 */
+	0x4000f000,	/* 1F usart3 */
+	0x40010000,	/* 20 uart4 */
+	0x40011000,	/* 21 uart5 */
+	0x40012000,	/* 22 i2c1 */
+	0x40013000,	/* 23 i2c2 */
+	0x40014000,	/* 24 i2c3 */
+	0x40015000,	/* 25 i2c5 */
+	0x40016000,	/* 26 cec */
+	0x40017000,	/* 27 dac */
+	0x40018000,	/* 28 uart7 */
+	0x40019000,	/* 29 uart8 */
+	ETZPC_RESERVED,	/* 2A reserved */
+	ETZPC_RESERVED,	/* 2B reserved */
+	0x4001c000,	/* 2C mdios */
+	ETZPC_RESERVED,	/* 2D reserved */
+	ETZPC_RESERVED,	/* 2E reserved */
+	ETZPC_RESERVED,	/* 2F reserved */
+	0x44000000,	/* 30 tim1 */
+	0x44001000,	/* 31 tim8 */
+	ETZPC_RESERVED,	/* 32 reserved */
+	0x44003000,	/* 33 usart6 */
+	0x44004000,	/* 34 spi1 */
+	0x44005000,	/* 35 spi4 */
+	0x44006000,	/* 36 tim15 */
+	0x44007000,	/* 37 tim16 */
+	0x44008000,	/* 38 tim17 */
+	0x44009000,	/* 39 spi5 */
+	0x4400a000,	/* 3A sai1 */
+	0x4400b000,	/* 3B sai2 */
+	0x4400c000,	/* 3C sai3 */
+	0x4400d000,	/* 3D dfsdm */
+	STM32_FDCAN_BASE,	/* 3E tt_fdcan */
+	ETZPC_RESERVED,	/* 3F reserved */
+	0x50021000,	/* 40 lptim2 */
+	0x50022000,	/* 41 lptim3 */
+	0x50023000,	/* 42 lptim4 */
+	0x50024000,	/* 43 lptim5 */
+	0x50027000,	/* 44 sai4 */
+	0x50025000,	/* 45 vrefbuf */
+	0x4c006000,	/* 46 dcmi */
+	0x4c004000,	/* 47 crc2 */
+	0x48003000,	/* 48 adc */
+	0x4c002000,	/* 49 hash2 */
+	0x4c003000,	/* 4A rng2 */
+	STM32_CRYP2_BASE,	/* 4B cryp2 */
+	ETZPC_RESERVED,	/* 4C reserved */
+	ETZPC_RESERVED,	/* 4D reserved */
+	ETZPC_RESERVED,	/* 4E reserved */
+	ETZPC_RESERVED,	/* 4F reserved */
+	ETZPC_RESERVED,	/* 50 sram1 */
+	ETZPC_RESERVED,	/* 51 sram2 */
+	ETZPC_RESERVED,	/* 52 sram3 */
+	ETZPC_RESERVED,	/* 53 sram4 */
+	ETZPC_RESERVED,	/* 54 retram */
+	0x49000000,	/* 55 otg */
+	0x48004000,	/* 56 sdmmc3 */
+	0x48005000,	/* 57 dlybsd3 */
+	0x48000000,	/* 58 dma1 */
+	0x48001000,	/* 59 dma2 */
+	0x48002000,	/* 5A dmamux */
+	0x58002000,	/* 5B fmc */
+	0x58003000,	/* 5C qspi */
+	0x58004000,	/* 5D dlybq */
+	0x5800a000,	/* 5E eth */
+	ETZPC_RESERVED,	/* 5F reserved */
+};
+
+/* fdt helper */
+static bool fdt_disable_subnode_by_address(void *fdt, int offset, u32 addr)
+{
+	int node;
+	fdt_addr_t regs;
+
+	for (node = fdt_first_subnode(fdt, offset);
+	     node >= 0;
+	     node = fdt_next_subnode(fdt, node)) {
+		regs = fdtdec_get_addr(fdt, node, "reg");
+		if (addr == regs) {
+			if (fdtdec_get_is_enabled(fdt, node)) {
+				fdt_status_disabled(fdt, node);
+
+				return true;
+			}
+			return false;
+		}
+	}
+
+	return false;
+}
+
+static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node)
+{
+	const u32 *array;
+	int array_size, i;
+	int offset, shift;
+	u32 addr, status, decprot[ETZPC_DECPROT_NB];
+
+	array = stm32mp1_ip_addr;
+	array_size = ARRAY_SIZE(stm32mp1_ip_addr);
+
+	for (i = 0; i < ETZPC_DECPROT_NB; i++)
+		decprot[i] = readl(ETZPC_DECPROT(i));
+
+	for (i = 0; i < array_size; i++) {
+		offset = i / NB_PROT_PER_REG;
+		shift = (i % NB_PROT_PER_REG) * DECPROT_NB_BITS;
+		status = (decprot[offset] >> shift) & DECPROT_MASK;
+		addr = array[i];
+
+		log_debug("ETZPC: 0x%08x decprot %d=%d\n", addr, i, status);
+
+		if (addr == ETZPC_RESERVED ||
+		    status == DECPROT_NON_SECURED)
+			continue;
+
+		if (fdt_disable_subnode_by_address(fdt, soc_node, addr))
+			log_notice("ETZPC: 0x%08x node disabled, decprot %d=%d\n",
+				   addr, i, status);
+	}
+
+	return 0;
+}
+
+/* deactivate all the cpu except core 0 */
+static void stm32_fdt_fixup_cpu(void *blob, char *name)
+{
+	int off;
+	u32 reg;
+
+	off = fdt_path_offset(blob, "/cpus");
+	if (off < 0) {
+		log_warning("%s: couldn't find /cpus node\n", __func__);
+		return;
+	}
+
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		reg = fdtdec_get_addr(blob, off, "reg");
+		if (reg != 0) {
+			fdt_del_node(blob, off);
+			log_notice("FDT: cpu %d node remove for %s\n",
+				   reg, name);
+			/* after delete we can't trust the offsets anymore */
+			off = -1;
+		}
+		off = fdt_node_offset_by_prop_value(blob, off,
+						    "device_type", "cpu", 4);
+	}
+}
+
+static void stm32_fdt_disable(void *fdt, int offset, u32 addr,
+			      const char *string, const char *name)
+{
+	if (fdt_disable_subnode_by_address(fdt, offset, addr))
+		log_notice("FDT: %s@%08x node disabled for %s\n",
+			   string, addr, name);
+}
+
+static void stm32_fdt_disable_optee(void *blob)
+{
+	int off, node;
+
+	/* Delete "optee" firmware node */
+	off = fdt_node_offset_by_compatible(blob, -1, "linaro,optee-tz");
+	if (off >= 0 && fdtdec_get_is_enabled(blob, off))
+		fdt_del_node(blob, off);
+
+	/* Delete "optee@..." reserved-memory node */
+	off = fdt_path_offset(blob, "/reserved-memory/");
+	if (off < 0)
+		return;
+	for (node = fdt_first_subnode(blob, off);
+	     node >= 0;
+	     node = fdt_next_subnode(blob, node)) {
+		if (strncmp(fdt_get_name(blob, node, NULL), "optee@", 6))
+			continue;
+
+		if (fdt_del_node(blob, node))
+			printf("Failed to remove optee reserved-memory node\n");
+	}
+}
+
+/*
+ * This function is called right before the kernel is booted. "blob" is the
+ * device tree that will be passed to the kernel.
+ */
+int ft_system_setup(void *blob, struct bd_info *bd)
+{
+	int ret = 0;
+	int soc;
+	u32 pkg, cpu;
+	char name[SOC_NAME_SIZE];
+
+	soc = fdt_path_offset(blob, "/soc");
+	if (soc < 0)
+		return soc;
+
+	if (CONFIG_IS_ENABLED(STM32_ETZPC)) {
+		ret = stm32_fdt_fixup_etzpc(blob, soc);
+		if (ret)
+			return ret;
+	}
+
+	/* MPUs Part Numbers and name*/
+	cpu = get_cpu_type();
+	get_soc_name(name);
+
+	switch (cpu) {
+	case CPU_STM32MP151Fxx:
+	case CPU_STM32MP151Dxx:
+	case CPU_STM32MP151Cxx:
+	case CPU_STM32MP151Axx:
+		stm32_fdt_fixup_cpu(blob, name);
+		/* after cpu delete we can't trust the soc offsets anymore */
+		soc = fdt_path_offset(blob, "/soc");
+		stm32_fdt_disable(blob, soc, STM32_FDCAN_BASE, "can", name);
+		/* fall through */
+	case CPU_STM32MP153Fxx:
+	case CPU_STM32MP153Dxx:
+	case CPU_STM32MP153Cxx:
+	case CPU_STM32MP153Axx:
+		stm32_fdt_disable(blob, soc, STM32_GPU_BASE, "gpu", name);
+		stm32_fdt_disable(blob, soc, STM32_DSI_BASE, "dsi", name);
+		break;
+	default:
+		break;
+	}
+
+	switch (cpu) {
+	case CPU_STM32MP157Dxx:
+	case CPU_STM32MP157Axx:
+	case CPU_STM32MP153Dxx:
+	case CPU_STM32MP153Axx:
+	case CPU_STM32MP151Dxx:
+	case CPU_STM32MP151Axx:
+		stm32_fdt_disable(blob, soc, STM32_CRYP1_BASE, "cryp", name);
+		stm32_fdt_disable(blob, soc, STM32_CRYP2_BASE, "cryp", name);
+		break;
+	default:
+		break;
+	}
+
+	switch (get_cpu_package()) {
+	case PKG_AA_LBGA448:
+		pkg = STM32MP_PKG_AA;
+		break;
+	case PKG_AB_LBGA354:
+		pkg = STM32MP_PKG_AB;
+		break;
+	case PKG_AC_TFBGA361:
+		pkg = STM32MP_PKG_AC;
+		break;
+	case PKG_AD_TFBGA257:
+		pkg = STM32MP_PKG_AD;
+		break;
+	default:
+		pkg = 0;
+		break;
+	}
+	if (pkg) {
+		do_fixup_by_compat_u32(blob, "st,stm32mp157-pinctrl",
+				       "st,package", pkg, false);
+		do_fixup_by_compat_u32(blob, "st,stm32mp157-z-pinctrl",
+				       "st,package", pkg, false);
+	}
+
+	if (!CONFIG_IS_ENABLED(OPTEE) ||
+	    !tee_find_device(NULL, NULL, NULL, NULL))
+		stm32_fdt_disable_optee(blob);
+
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/include/mach/bsec.h b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/bsec.h
new file mode 100644
index 000000000..252eac394
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/bsec.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+/* check self hosted debug status = BSEC_DENABLE.DBGSWENABLE */
+bool bsec_dbgswenable(void);
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/include/mach/ddr.h b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/ddr.h
new file mode 100644
index 000000000..bfc42a7c4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/ddr.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef __MACH_STM32MP_DDR_H_
+#define __MACH_STM32MP_DDR_H_
+
+/* DDR power initializations */
+enum ddr_type {
+	STM32MP_DDR3,
+	STM32MP_LPDDR2_16,
+	STM32MP_LPDDR2_32,
+	STM32MP_LPDDR3_16,
+	STM32MP_LPDDR3_32,
+};
+
+int board_ddr_power_init(enum ddr_type ddr_type);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/gpio.h
new file mode 100644
index 000000000..7a0f29351
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/gpio.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+#include <asm/gpio.h>
+
+enum stm32_gpio_mode {
+	STM32_GPIO_MODE_IN = 0,
+	STM32_GPIO_MODE_OUT,
+	STM32_GPIO_MODE_AF,
+	STM32_GPIO_MODE_AN
+};
+
+enum stm32_gpio_otype {
+	STM32_GPIO_OTYPE_PP = 0,
+	STM32_GPIO_OTYPE_OD
+};
+
+enum stm32_gpio_speed {
+	STM32_GPIO_SPEED_2M = 0,
+	STM32_GPIO_SPEED_25M,
+	STM32_GPIO_SPEED_50M,
+	STM32_GPIO_SPEED_100M
+};
+
+enum stm32_gpio_pupd {
+	STM32_GPIO_PUPD_NO = 0,
+	STM32_GPIO_PUPD_UP,
+	STM32_GPIO_PUPD_DOWN
+};
+
+enum stm32_gpio_af {
+	STM32_GPIO_AF0 = 0,
+	STM32_GPIO_AF1,
+	STM32_GPIO_AF2,
+	STM32_GPIO_AF3,
+	STM32_GPIO_AF4,
+	STM32_GPIO_AF5,
+	STM32_GPIO_AF6,
+	STM32_GPIO_AF7,
+	STM32_GPIO_AF8,
+	STM32_GPIO_AF9,
+	STM32_GPIO_AF10,
+	STM32_GPIO_AF11,
+	STM32_GPIO_AF12,
+	STM32_GPIO_AF13,
+	STM32_GPIO_AF14,
+	STM32_GPIO_AF15
+};
+
+struct stm32_gpio_dsc {
+	u8	port;
+	u8	pin;
+};
+
+struct stm32_gpio_ctl {
+	enum stm32_gpio_mode	mode;
+	enum stm32_gpio_otype	otype;
+	enum stm32_gpio_speed	speed;
+	enum stm32_gpio_pupd	pupd;
+	enum stm32_gpio_af	af;
+};
+
+struct stm32_gpio_regs {
+	u32 moder;	/* GPIO port mode */
+	u32 otyper;	/* GPIO port output type */
+	u32 ospeedr;	/* GPIO port output speed */
+	u32 pupdr;	/* GPIO port pull-up/pull-down */
+	u32 idr;	/* GPIO port input data */
+	u32 odr;	/* GPIO port output data */
+	u32 bsrr;	/* GPIO port bit set/reset */
+	u32 lckr;	/* GPIO port configuration lock */
+	u32 afr[2];	/* GPIO alternate function */
+};
+
+struct stm32_gpio_priv {
+	struct stm32_gpio_regs *regs;
+	unsigned int gpio_range;
+};
+
+int stm32_offset_to_index(struct udevice *dev, unsigned int offset);
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32.h b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32.h
new file mode 100644
index 000000000..5fdb893b0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef _MACH_STM32_H_
+#define _MACH_STM32_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+/*
+ * Peripheral memory map
+ * only address used before device tree parsing
+ */
+#define STM32_RCC_BASE			0x50000000
+#define STM32_PWR_BASE			0x50001000
+#define STM32_DBGMCU_BASE		0x50081000
+#define STM32_FMC2_BASE			0x58002000
+#define STM32_TZC_BASE			0x5C006000
+#define STM32_ETZPC_BASE		0x5C007000
+#define STM32_STGEN_BASE		0x5C008000
+#define STM32_TAMP_BASE			0x5C00A000
+
+#define STM32_USART1_BASE		0x5C000000
+#define STM32_USART2_BASE		0x4000E000
+#define STM32_USART3_BASE		0x4000F000
+#define STM32_UART4_BASE		0x40010000
+#define STM32_UART5_BASE		0x40011000
+#define STM32_USART6_BASE		0x44003000
+#define STM32_UART7_BASE		0x40018000
+#define STM32_UART8_BASE		0x40019000
+
+#define STM32_SYSRAM_BASE		0x2FFC0000
+#define STM32_SYSRAM_SIZE		SZ_256K
+
+#define STM32_DDR_BASE			0xC0000000
+#define STM32_DDR_SIZE			SZ_1G
+
+#ifndef __ASSEMBLY__
+/* enumerated used to identify the SYSCON driver instance */
+enum {
+	STM32MP_SYSCON_UNKNOWN,
+	STM32MP_SYSCON_SYSCFG,
+};
+
+/*
+ * enumerated for boot interface from Bootrom, used in TAMP_BOOT_CONTEXT
+ * - boot device = bit 8:4
+ * - boot instance = bit 3:0
+ */
+#define BOOT_TYPE_MASK		0xF0
+#define BOOT_TYPE_SHIFT		4
+#define BOOT_INSTANCE_MASK	0x0F
+#define BOOT_INSTANCE_SHIFT	0
+
+enum boot_device {
+	BOOT_FLASH_SD = 0x10,
+	BOOT_FLASH_SD_1 = 0x11,
+	BOOT_FLASH_SD_2 = 0x12,
+	BOOT_FLASH_SD_3 = 0x13,
+
+	BOOT_FLASH_EMMC = 0x20,
+	BOOT_FLASH_EMMC_1 = 0x21,
+	BOOT_FLASH_EMMC_2 = 0x22,
+	BOOT_FLASH_EMMC_3 = 0x23,
+
+	BOOT_FLASH_NAND = 0x30,
+	BOOT_FLASH_NAND_FMC = 0x31,
+
+	BOOT_FLASH_NOR = 0x40,
+	BOOT_FLASH_NOR_QSPI = 0x41,
+
+	BOOT_SERIAL_UART = 0x50,
+	BOOT_SERIAL_UART_1 = 0x51,
+	BOOT_SERIAL_UART_2 = 0x52,
+	BOOT_SERIAL_UART_3 = 0x53,
+	BOOT_SERIAL_UART_4 = 0x54,
+	BOOT_SERIAL_UART_5 = 0x55,
+	BOOT_SERIAL_UART_6 = 0x56,
+	BOOT_SERIAL_UART_7 = 0x57,
+	BOOT_SERIAL_UART_8 = 0x58,
+
+	BOOT_SERIAL_USB = 0x60,
+	BOOT_SERIAL_USB_OTG = 0x62,
+
+	BOOT_FLASH_SPINAND = 0x70,
+	BOOT_FLASH_SPINAND_1 = 0x71,
+};
+
+/* TAMP registers */
+#define TAMP_BACKUP_REGISTER(x)		(STM32_TAMP_BASE + 0x100 + 4 * x)
+#define TAMP_BACKUP_MAGIC_NUMBER	TAMP_BACKUP_REGISTER(4)
+#define TAMP_BACKUP_BRANCH_ADDRESS	TAMP_BACKUP_REGISTER(5)
+#define TAMP_COPRO_RSC_TBL_ADDRESS	TAMP_BACKUP_REGISTER(17)
+#define TAMP_COPRO_STATE		TAMP_BACKUP_REGISTER(18)
+#define TAMP_BOOT_CONTEXT		TAMP_BACKUP_REGISTER(20)
+#define TAMP_BOOTCOUNT			TAMP_BACKUP_REGISTER(21)
+
+#define TAMP_COPRO_STATE_OFF		0
+#define TAMP_COPRO_STATE_INIT		1
+#define TAMP_COPRO_STATE_CRUN		2
+#define TAMP_COPRO_STATE_CSTOP		3
+#define TAMP_COPRO_STATE_STANDBY	4
+#define TAMP_COPRO_STATE_CRASH		5
+
+#define TAMP_BOOT_MODE_MASK		GENMASK(15, 8)
+#define TAMP_BOOT_MODE_SHIFT		8
+#define TAMP_BOOT_DEVICE_MASK		GENMASK(7, 4)
+#define TAMP_BOOT_INSTANCE_MASK		GENMASK(3, 0)
+#define TAMP_BOOT_FORCED_MASK		GENMASK(7, 0)
+#define TAMP_BOOT_DEBUG_ON		BIT(16)
+
+enum forced_boot_mode {
+	BOOT_NORMAL = 0x00,
+	BOOT_FASTBOOT = 0x01,
+	BOOT_RECOVERY = 0x02,
+	BOOT_STM32PROG = 0x03,
+	BOOT_UMS_MMC0 = 0x10,
+	BOOT_UMS_MMC1 = 0x11,
+	BOOT_UMS_MMC2 = 0x12,
+};
+
+/* offset used for BSEC driver: misc_read and misc_write */
+#define STM32_BSEC_SHADOW_OFFSET	0x0
+#define STM32_BSEC_SHADOW(id)		(STM32_BSEC_SHADOW_OFFSET + (id) * 4)
+#define STM32_BSEC_OTP_OFFSET		0x80000000
+#define STM32_BSEC_OTP(id)		(STM32_BSEC_OTP_OFFSET + (id) * 4)
+#define STM32_BSEC_LOCK_OFFSET		0xC0000000
+#define STM32_BSEC_LOCK(id)		(STM32_BSEC_LOCK_OFFSET + (id) * 4)
+
+/* BSEC OTP index */
+#define BSEC_OTP_RPN	1
+#define BSEC_OTP_SERIAL	13
+#define BSEC_OTP_PKG	16
+#define BSEC_OTP_MAC	57
+#define BSEC_OTP_BOARD	59
+
+#endif /* __ASSEMBLY__ */
+#endif /* _MACH_STM32_H_ */
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h
new file mode 100644
index 000000000..4ad14f963
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef __STM32MP1_SMC_H__
+#define __STM32MP1_SMC_H__
+
+#include <linux/arm-smccc.h>
+
+/*
+ * SMC function IDs for STM32 Service queries
+ * STM32 SMC services use the space between 0x82000000 and 0x8200FFFF
+ * like this is defined in SMC calling Convention by ARM
+ * for SiP (silicon Partner)
+ * http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+ */
+#define STM32_SMC_VERSION		0x82000000
+
+/* Secure Service access from Non-secure */
+#define STM32_SMC_BSEC			0x82001003
+
+/* Service for BSEC */
+#define STM32_SMC_READ_SHADOW		0x01
+#define STM32_SMC_PROG_OTP		0x02
+#define STM32_SMC_WRITE_SHADOW		0x03
+#define STM32_SMC_READ_OTP		0x04
+#define STM32_SMC_READ_ALL		0x05
+#define STM32_SMC_WRITE_ALL		0x06
+#define STM32_SMC_WRLOCK_OTP		0x07
+
+/* SMC error codes */
+#define STM32_SMC_OK			0x0
+#define STM32_SMC_NOT_SUPPORTED		-1
+#define STM32_SMC_FAILED		-2
+#define STM32_SMC_INVALID_PARAMS	-3
+
+#define stm32_smc_exec(svc, op, data1, data2) \
+	stm32_smc(svc, op, data1, data2, NULL)
+
+#ifdef CONFIG_ARM_SMCCC
+static inline u32 stm32_smc(u32 svc, u8 op, u32 data1, u32 data2, u32 *result)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(svc, op, data1, data2, 0, 0, 0, 0, &res);
+
+	if (res.a0) {
+		pr_err("%s: Failed to exec svc=%x op=%x in secure mode (err = %ld)\n",
+		       __func__, svc, op, res.a0);
+		return -EINVAL;
+	}
+	if (result)
+		*result = (u32)res.a1;
+
+	return 0;
+}
+#else
+static inline u32 stm32_smc(u32 svc, u8 op, u32 data1, u32 data2, u32 *result)
+{
+	return 0;
+}
+#endif
+
+#endif /* __STM32MP1_SMC_H__ */
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32prog.h b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32prog.h
new file mode 100644
index 000000000..c080b9cc4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/stm32prog.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#define STM32PROG_VIRT_FIRST_DEV_NUM		0xF1
+
+int stm32prog_write_medium_virt(struct dfu_entity *dfu, u64 offset,
+				void *buf, long *len);
+int stm32prog_read_medium_virt(struct dfu_entity *dfu, u64 offset,
+			       void *buf, long *len);
+int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size);
+
+bool stm32prog_get_tee_partitions(void);
+
+bool stm32prog_get_fsbl_nor(void);
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/sys_proto.h
new file mode 100644
index 000000000..4149d3a13
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/include/mach/sys_proto.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2015-2017, STMicroelectronics - All Rights Reserved
+ */
+
+/* ID = Device Version (bit31:16) + Device Part Number (RPN) (bit7:0) */
+#define CPU_STM32MP157Cxx	0x05000000
+#define CPU_STM32MP157Axx	0x05000001
+#define CPU_STM32MP153Cxx	0x05000024
+#define CPU_STM32MP153Axx	0x05000025
+#define CPU_STM32MP151Cxx	0x0500002E
+#define CPU_STM32MP151Axx	0x0500002F
+#define CPU_STM32MP157Fxx	0x05000080
+#define CPU_STM32MP157Dxx	0x05000081
+#define CPU_STM32MP153Fxx	0x050000A4
+#define CPU_STM32MP153Dxx	0x050000A5
+#define CPU_STM32MP151Fxx	0x050000AE
+#define CPU_STM32MP151Dxx	0x050000AF
+
+/* return CPU_STMP32MP...Xxx constants */
+u32 get_cpu_type(void);
+
+#define CPU_DEV_STM32MP15	0x500
+
+/* return CPU_DEV constants */
+u32 get_cpu_dev(void);
+
+#define CPU_REVA	0x1000
+#define CPU_REVB	0x2000
+#define CPU_REVZ	0x2001
+
+/* return CPU_REV constants */
+u32 get_cpu_rev(void);
+
+/* Get Package options from OTP */
+u32 get_cpu_package(void);
+
+#define PKG_AA_LBGA448	4
+#define PKG_AB_LBGA354	3
+#define PKG_AC_TFBGA361	2
+#define PKG_AD_TFBGA257	1
+
+/* Get SOC name */
+#define SOC_NAME_SIZE 20
+void get_soc_name(char name[SOC_NAME_SIZE]);
+
+/* return boot mode */
+u32 get_bootmode(void);
+
+int setup_mac_address(void);
+
+/* board power management : configure vddcore according OPP */
+void board_vddcore_init(u32 voltage_mv);
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/psci.c b/roms/u-boot/arch/arm/mach-stm32mp/psci.c
new file mode 100644
index 000000000..155aa79cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/psci.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/cache.h>
+#include <asm/gic.h>
+#include <asm/io.h>
+#include <asm/psci.h>
+#include <asm/secure.h>
+#include <linux/bitops.h>
+
+#define BOOT_API_A7_CORE0_MAGIC_NUMBER	0xCA7FACE0
+#define BOOT_API_A7_CORE1_MAGIC_NUMBER	0xCA7FACE1
+
+#define MPIDR_AFF0			GENMASK(7, 0)
+
+#define RCC_MP_GRSTCSETR		(STM32_RCC_BASE + 0x0404)
+#define RCC_MP_GRSTCSETR_MPUP1RST	BIT(5)
+#define RCC_MP_GRSTCSETR_MPUP0RST	BIT(4)
+#define RCC_MP_GRSTCSETR_MPSYSRST	BIT(0)
+
+#define STM32MP1_PSCI_NR_CPUS		2
+#if STM32MP1_PSCI_NR_CPUS > CONFIG_ARMV7_PSCI_NR_CPUS
+#error "invalid value for CONFIG_ARMV7_PSCI_NR_CPUS"
+#endif
+
+u8 psci_state[STM32MP1_PSCI_NR_CPUS] __secure_data = {
+	 PSCI_AFFINITY_LEVEL_ON,
+	 PSCI_AFFINITY_LEVEL_OFF};
+
+static u32 __secure_data cntfrq;
+
+static u32 __secure cp15_read_cntfrq(void)
+{
+	u32 frq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (frq));
+
+	return frq;
+}
+
+static void __secure cp15_write_cntfrq(u32 frq)
+{
+	asm volatile ("mcr p15, 0, %0, c14, c0, 0" : : "r" (frq));
+}
+
+static inline void psci_set_state(int cpu, u8 state)
+{
+	psci_state[cpu] = state;
+	dsb();
+	isb();
+}
+
+static u32 __secure stm32mp_get_gicd_base_address(void)
+{
+	u32 periphbase;
+
+	/* get the GIC base address from the CBAR register */
+	asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
+
+	return (periphbase & CBAR_MASK) + GIC_DIST_OFFSET;
+}
+
+static void __secure stm32mp_raise_sgi0(int cpu)
+{
+	u32 gic_dist_addr;
+
+	gic_dist_addr = stm32mp_get_gicd_base_address();
+
+	/* ask cpu with SGI0 */
+	writel((BIT(cpu) << 16), gic_dist_addr + GICD_SGIR);
+}
+
+void __secure psci_arch_cpu_entry(void)
+{
+	u32 cpu = psci_get_cpu_id();
+
+	psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON);
+
+	/* write the saved cntfrq */
+	cp15_write_cntfrq(cntfrq);
+
+	/* reset magic in TAMP register */
+	writel(0xFFFFFFFF, TAMP_BACKUP_MAGIC_NUMBER);
+}
+
+s32 __secure psci_features(u32 function_id, u32 psci_fid)
+{
+	switch (psci_fid) {
+	case ARM_PSCI_0_2_FN_PSCI_VERSION:
+	case ARM_PSCI_0_2_FN_CPU_OFF:
+	case ARM_PSCI_0_2_FN_CPU_ON:
+	case ARM_PSCI_0_2_FN_AFFINITY_INFO:
+	case ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE:
+	case ARM_PSCI_0_2_FN_SYSTEM_OFF:
+	case ARM_PSCI_0_2_FN_SYSTEM_RESET:
+		return 0x0;
+	}
+	return ARM_PSCI_RET_NI;
+}
+
+u32 __secure psci_version(void)
+{
+	return ARM_PSCI_VER_1_0;
+}
+
+s32 __secure psci_affinity_info(u32 function_id, u32 target_affinity,
+				u32  lowest_affinity_level)
+{
+	u32 cpu = target_affinity & MPIDR_AFF0;
+
+	if (lowest_affinity_level > 0)
+		return ARM_PSCI_RET_INVAL;
+
+	if (target_affinity & ~MPIDR_AFF0)
+		return ARM_PSCI_RET_INVAL;
+
+	if (cpu >= STM32MP1_PSCI_NR_CPUS)
+		return ARM_PSCI_RET_INVAL;
+
+	return psci_state[cpu];
+}
+
+u32 __secure psci_migrate_info_type(void)
+{
+	/*
+	 * in Power_State_Coordination_Interface_PDD_v1_1_DEN0022D.pdf
+	 * return 2 = Trusted OS is either not present or does not require
+	 * migration, system of this type does not require the caller
+	 * to use the MIGRATE function.
+	 * MIGRATE function calls return NOT_SUPPORTED.
+	 */
+	return 2;
+}
+
+s32 __secure psci_cpu_on(u32 function_id, u32 target_cpu, u32 pc,
+			 u32 context_id)
+{
+	u32 cpu = target_cpu & MPIDR_AFF0;
+
+	if (target_cpu & ~MPIDR_AFF0)
+		return ARM_PSCI_RET_INVAL;
+
+	if (cpu >= STM32MP1_PSCI_NR_CPUS)
+		return ARM_PSCI_RET_INVAL;
+
+	if (psci_state[cpu] == PSCI_AFFINITY_LEVEL_ON)
+		return ARM_PSCI_RET_ALREADY_ON;
+
+	/* read and save cntfrq of current cpu to write on target cpu  */
+	cntfrq = cp15_read_cntfrq();
+
+	/* reset magic in TAMP register */
+	if (readl(TAMP_BACKUP_MAGIC_NUMBER))
+		writel(0xFFFFFFFF, TAMP_BACKUP_MAGIC_NUMBER);
+	/*
+	 * ROM code need a first SGI0 after core reset
+	 * core is ready when magic is set to 0 in ROM code
+	 */
+	while (readl(TAMP_BACKUP_MAGIC_NUMBER))
+		stm32mp_raise_sgi0(cpu);
+
+	/* store target PC and context id*/
+	psci_save(cpu, pc, context_id);
+
+	/* write entrypoint in backup RAM register */
+	writel((u32)&psci_cpu_entry, TAMP_BACKUP_BRANCH_ADDRESS);
+	psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON_PENDING);
+
+	/* write magic number in backup register */
+	if (cpu == 0x01)
+		writel(BOOT_API_A7_CORE1_MAGIC_NUMBER,
+		       TAMP_BACKUP_MAGIC_NUMBER);
+	else
+		writel(BOOT_API_A7_CORE0_MAGIC_NUMBER,
+		       TAMP_BACKUP_MAGIC_NUMBER);
+
+	/* Generate an IT to start the core */
+	stm32mp_raise_sgi0(cpu);
+
+	return ARM_PSCI_RET_SUCCESS;
+}
+
+s32 __secure psci_cpu_off(void)
+{
+	u32 cpu;
+
+	cpu = psci_get_cpu_id();
+
+	psci_cpu_off_common();
+	psci_set_state(cpu, PSCI_AFFINITY_LEVEL_OFF);
+
+	/* reset core: wfi is managed by BootRom */
+	if (cpu == 0x01)
+		writel(RCC_MP_GRSTCSETR_MPUP1RST, RCC_MP_GRSTCSETR);
+	else
+		writel(RCC_MP_GRSTCSETR_MPUP0RST, RCC_MP_GRSTCSETR);
+
+	/* just waiting reset */
+	while (1)
+		wfi();
+}
+
+void __secure psci_system_reset(void)
+{
+	/* System reset */
+	writel(RCC_MP_GRSTCSETR_MPSYSRST, RCC_MP_GRSTCSETR);
+	/* just waiting reset */
+	while (1)
+		wfi();
+}
+
+void __secure psci_system_off(void)
+{
+	/* System Off is not managed, waiting user power off
+	 * TODO: handle I2C write in PMIC Main Control register bit 0 = SWOFF
+	 */
+	while (1)
+		wfi();
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/pwr_regulator.c b/roms/u-boot/arch/arm/mach-stm32mp/pwr_regulator.c
new file mode 100644
index 000000000..846637ab1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/pwr_regulator.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY UCLASS_REGULATOR
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <dm/device_compat.h>
+#include <dm/device-internal.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+
+#define STM32MP_PWR_CR3 0xc
+#define STM32MP_PWR_CR3_USB33DEN BIT(24)
+#define STM32MP_PWR_CR3_USB33RDY BIT(26)
+#define STM32MP_PWR_CR3_REG18DEN BIT(28)
+#define STM32MP_PWR_CR3_REG18RDY BIT(29)
+#define STM32MP_PWR_CR3_REG11DEN BIT(30)
+#define STM32MP_PWR_CR3_REG11RDY BIT(31)
+
+struct stm32mp_pwr_reg_info {
+	u32 enable;
+	u32 ready;
+	char *name;
+};
+
+struct stm32mp_pwr_priv {
+	fdt_addr_t base;
+};
+
+static int stm32mp_pwr_write(struct udevice *dev, uint reg,
+			     const uint8_t *buff, int len)
+{
+	struct stm32mp_pwr_priv *priv = dev_get_priv(dev);
+	u32 val = *(u32 *)buff;
+
+	if (len != 4)
+		return -EINVAL;
+
+	writel(val, priv->base + STM32MP_PWR_CR3);
+
+	return 0;
+}
+
+static int stm32mp_pwr_read(struct udevice *dev, uint reg, uint8_t *buff,
+			    int len)
+{
+	struct stm32mp_pwr_priv *priv = dev_get_priv(dev);
+
+	if (len != 4)
+		return -EINVAL;
+
+	*(u32 *)buff = readl(priv->base + STM32MP_PWR_CR3);
+
+	return 0;
+}
+
+static int stm32mp_pwr_of_to_plat(struct udevice *dev)
+{
+	struct stm32mp_pwr_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct pmic_child_info pwr_children_info[] = {
+	{ .prefix = "reg", .driver = "stm32mp_pwr_regulator"},
+	{ .prefix = "usb", .driver = "stm32mp_pwr_regulator"},
+	{ },
+};
+
+static int stm32mp_pwr_bind(struct udevice *dev)
+{
+	int children;
+
+	children = pmic_bind_children(dev, dev_ofnode(dev), pwr_children_info);
+	if (!children)
+		dev_dbg(dev, "no child found\n");
+
+	return 0;
+}
+
+static struct dm_pmic_ops stm32mp_pwr_ops = {
+	.read = stm32mp_pwr_read,
+	.write = stm32mp_pwr_write,
+};
+
+static const struct udevice_id stm32mp_pwr_ids[] = {
+	{ .compatible = "st,stm32mp1,pwr-reg" },
+	{ }
+};
+
+U_BOOT_DRIVER(stm32mp_pwr_pmic) = {
+	.name = "stm32mp_pwr_pmic",
+	.id = UCLASS_PMIC,
+	.of_match = stm32mp_pwr_ids,
+	.bind = stm32mp_pwr_bind,
+	.ops = &stm32mp_pwr_ops,
+	.of_to_plat = stm32mp_pwr_of_to_plat,
+	.priv_auto	= sizeof(struct stm32mp_pwr_priv),
+};
+
+static const struct stm32mp_pwr_reg_info stm32mp_pwr_reg11 = {
+	.enable = STM32MP_PWR_CR3_REG11DEN,
+	.ready = STM32MP_PWR_CR3_REG11RDY,
+	.name = "reg11"
+};
+
+static const struct stm32mp_pwr_reg_info stm32mp_pwr_reg18 = {
+	.enable = STM32MP_PWR_CR3_REG18DEN,
+	.ready = STM32MP_PWR_CR3_REG18RDY,
+	.name = "reg18"
+};
+
+static const struct stm32mp_pwr_reg_info stm32mp_pwr_usb33 = {
+	.enable = STM32MP_PWR_CR3_USB33DEN,
+	.ready = STM32MP_PWR_CR3_USB33RDY,
+	.name = "usb33"
+};
+
+static const struct stm32mp_pwr_reg_info *stm32mp_pwr_reg_infos[] = {
+	&stm32mp_pwr_reg11,
+	&stm32mp_pwr_reg18,
+	&stm32mp_pwr_usb33,
+	NULL
+};
+
+static int stm32mp_pwr_regulator_probe(struct udevice *dev)
+{
+	const struct stm32mp_pwr_reg_info **p = stm32mp_pwr_reg_infos;
+	struct dm_regulator_uclass_plat *uc_pdata;
+
+	uc_pdata = dev_get_uclass_plat(dev);
+
+	while (*p) {
+		int rc;
+
+		rc = dev_read_stringlist_search(dev, "regulator-name",
+						(*p)->name);
+		if (rc >= 0) {
+			dev_dbg(dev, "found regulator %s\n", (*p)->name);
+			break;
+		} else if (rc != -ENODATA) {
+			return rc;
+		}
+		p++;
+	}
+	if (!*p) {
+		int i = 0;
+		const char *s;
+
+		dev_dbg(dev, "regulator ");
+		while (dev_read_string_index(dev, "regulator-name",
+					     i++, &s) >= 0)
+			dev_dbg(dev, "%s'%s' ", (i > 1) ? ", " : "", s);
+		dev_dbg(dev, "%s not supported\n", (i > 2) ? "are" : "is");
+		return -EINVAL;
+	}
+
+	uc_pdata->type = REGULATOR_TYPE_FIXED;
+	dev_set_priv(dev, (void *)*p);
+
+	return 0;
+}
+
+static int stm32mp_pwr_regulator_set_value(struct udevice *dev, int uV)
+{
+	struct dm_regulator_uclass_plat *uc_pdata;
+
+	uc_pdata = dev_get_uclass_plat(dev);
+	if (!uc_pdata)
+		return -ENXIO;
+
+	if (uc_pdata->min_uV != uV) {
+		dev_dbg(dev, "Invalid uV=%d for: %s\n", uV, uc_pdata->name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int stm32mp_pwr_regulator_get_value(struct udevice *dev)
+{
+	struct dm_regulator_uclass_plat *uc_pdata;
+
+	uc_pdata = dev_get_uclass_plat(dev);
+	if (!uc_pdata)
+		return -ENXIO;
+
+	if (uc_pdata->min_uV != uc_pdata->max_uV) {
+		dev_dbg(dev, "Invalid constraints for: %s\n", uc_pdata->name);
+		return -EINVAL;
+	}
+
+	return uc_pdata->min_uV;
+}
+
+static int stm32mp_pwr_regulator_get_enable(struct udevice *dev)
+{
+	const struct stm32mp_pwr_reg_info *p = dev_get_priv(dev);
+	int rc;
+	u32 reg;
+
+	rc = pmic_read(dev->parent, 0, (uint8_t *)&reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	dev_dbg(dev, "%s id %s\n", p->name, (reg & p->enable) ? "on" : "off");
+
+	return (reg & p->enable) != 0;
+}
+
+static int stm32mp_pwr_regulator_set_enable(struct udevice *dev, bool enable)
+{
+	const struct stm32mp_pwr_reg_info *p = dev_get_priv(dev);
+	int rc;
+	u32 reg;
+	u32 time_start;
+
+	dev_dbg(dev, "Turning %s %s\n", enable ? "on" : "off", p->name);
+
+	rc = pmic_read(dev->parent, 0, (uint8_t *)&reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	/* if regulator is already in the wanted state, nothing to do */
+	if (!!(reg & p->enable) == enable)
+		return 0;
+
+	reg &= ~p->enable;
+	if (enable)
+		reg |= p->enable;
+
+	rc = pmic_write(dev->parent, 0, (uint8_t *)&reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	if (!enable)
+		return 0;
+
+	/* waiting ready for enable */
+	time_start = get_timer(0);
+	while (1) {
+		rc = pmic_read(dev->parent, 0, (uint8_t *)&reg, sizeof(reg));
+		if (rc)
+			return rc;
+		if (reg & p->ready)
+			break;
+		if (get_timer(time_start) > CONFIG_SYS_HZ) {
+			dev_dbg(dev, "%s: timeout\n", p->name);
+			return -ETIMEDOUT;
+		}
+	}
+	return 0;
+}
+
+static const struct dm_regulator_ops stm32mp_pwr_regulator_ops = {
+	.set_value  = stm32mp_pwr_regulator_set_value,
+	.get_value  = stm32mp_pwr_regulator_get_value,
+	.get_enable = stm32mp_pwr_regulator_get_enable,
+	.set_enable = stm32mp_pwr_regulator_set_enable,
+};
+
+U_BOOT_DRIVER(stm32mp_pwr_regulator) = {
+	.name = "stm32mp_pwr_regulator",
+	.id = UCLASS_REGULATOR,
+	.ops = &stm32mp_pwr_regulator_ops,
+	.probe = stm32mp_pwr_regulator_probe,
+};
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/spl.c b/roms/u-boot/arch/arm/mach-stm32mp/spl.c
new file mode 100644
index 000000000..b53659a69
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/spl.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY LOGC_ARCH
+
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/libfdt.h>
+
+u32 spl_boot_device(void)
+{
+	u32 boot_mode;
+
+	boot_mode = get_bootmode();
+
+	switch (boot_mode) {
+	case BOOT_FLASH_SD_1:
+	case BOOT_FLASH_EMMC_1:
+		return BOOT_DEVICE_MMC1;
+	case BOOT_FLASH_SD_2:
+	case BOOT_FLASH_EMMC_2:
+		return BOOT_DEVICE_MMC2;
+	case BOOT_SERIAL_UART_1:
+	case BOOT_SERIAL_UART_2:
+	case BOOT_SERIAL_UART_3:
+	case BOOT_SERIAL_UART_4:
+	case BOOT_SERIAL_UART_5:
+	case BOOT_SERIAL_UART_6:
+	case BOOT_SERIAL_UART_7:
+	case BOOT_SERIAL_UART_8:
+		return BOOT_DEVICE_UART;
+	case BOOT_SERIAL_USB_OTG:
+		return BOOT_DEVICE_USB;
+	case BOOT_FLASH_NAND_FMC:
+		return BOOT_DEVICE_NAND;
+	case BOOT_FLASH_NOR_QSPI:
+		return BOOT_DEVICE_SPI;
+	case BOOT_FLASH_SPINAND_1:
+		return BOOT_DEVICE_NONE; /* SPINAND not supported in SPL */
+	}
+
+	return BOOT_DEVICE_MMC1;
+}
+
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+	return MMCSD_MODE_RAW;
+}
+
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+int spl_mmc_boot_partition(const u32 boot_device)
+{
+	switch (boot_device) {
+	case BOOT_DEVICE_MMC1:
+		return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION;
+	case BOOT_DEVICE_MMC2:
+		return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2;
+	default:
+		return -EINVAL;
+	}
+}
+#endif
+
+#ifdef CONFIG_SPL_DISPLAY_PRINT
+void spl_display_print(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	const char *model;
+
+	/* same code than show_board_info() but not compiled for SPL
+	 * see CONFIG_DISPLAY_BOARDINFO & common/board_info.c
+	 */
+	model = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+	if (model)
+		log_info("Model: %s\n", model);
+}
+#endif
+
+__weak int board_early_init_f(void)
+{
+	return 0;
+}
+
+void board_init_f(ulong dummy)
+{
+	struct udevice *dev;
+	int ret;
+
+	arch_cpu_init();
+
+	ret = spl_early_init();
+	if (ret) {
+		log_debug("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+
+	ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+	if (ret) {
+		log_debug("Clock init failed: %d\n", ret);
+		hang();
+	}
+
+	ret = uclass_get_device(UCLASS_RESET, 0, &dev);
+	if (ret) {
+		log_debug("Reset init failed: %d\n", ret);
+		hang();
+	}
+
+	ret = uclass_get_device(UCLASS_PINCTRL, 0, &dev);
+	if (ret) {
+		log_debug("%s: Cannot find pinctrl device\n", __func__);
+		hang();
+	}
+
+	/* enable console uart printing */
+	preloader_console_init();
+
+	ret = board_early_init_f();
+	if (ret) {
+		log_debug("board_early_init_f() failed: %d\n", ret);
+		hang();
+	}
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		log_err("DRAM init failed: %d\n", ret);
+		hang();
+	}
+
+	/*
+	 * activate cache on DDR only when DDR is fully initialized
+	 * to avoid speculative access and issue in get_ram_size()
+	 */
+	if (!CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+		mmu_set_region_dcache_behaviour(STM32_DDR_BASE,
+						CONFIG_DDR_CACHEABLE_SIZE,
+						DCACHE_DEFAULT_OPTION);
+}
+
+void spl_board_prepare_for_boot(void)
+{
+	dcache_disable();
+}
+
+void spl_board_prepare_for_linux(void)
+{
+	dcache_disable();
+}
diff --git a/roms/u-boot/arch/arm/mach-stm32mp/syscon.c b/roms/u-boot/arch/arm/mach-stm32mp/syscon.c
new file mode 100644
index 000000000..3e61ce409
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-stm32mp/syscon.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch/stm32.h>
+
+static const struct udevice_id stm32mp_syscon_ids[] = {
+	{ .compatible = "st,stm32mp157-syscfg",
+	  .data = STM32MP_SYSCON_SYSCFG },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_stm32mp) = {
+	.name = "stmp32mp_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = stm32mp_syscon_ids,
+	.bind = dm_scan_fdt_dev,
+};
diff --git a/roms/u-boot/arch/arm/mach-sunxi/Kconfig b/roms/u-boot/arch/arm/mach-sunxi/Kconfig
new file mode 100644
index 000000000..bc8509b72
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/Kconfig
@@ -0,0 +1,1100 @@
+if ARCH_SUNXI
+
+config SPL_LDSCRIPT
+	default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64
+
+config IDENT_STRING
+	default " Allwinner Technology"
+
+config DRAM_SUN4I
+	bool
+	help
+	  Select this dram controller driver for Sun4/5/7i platforms,
+	  like A10/A13/A20.
+
+config DRAM_SUN6I
+	bool
+	help
+	  Select this dram controller driver for Sun6i platforms,
+	  like A31/A31s.
+
+config DRAM_SUN8I_A23
+	bool
+	help
+	  Select this dram controller driver for Sun8i platforms,
+	  for A23 SOC.
+
+config DRAM_SUN8I_A33
+	bool
+	help
+	  Select this dram controller driver for Sun8i platforms,
+	  for A33 SOC.
+
+config DRAM_SUN8I_A83T
+	bool
+	help
+	  Select this dram controller driver for Sun8i platforms,
+	  for A83T SOC.
+
+config DRAM_SUN9I
+	bool
+	help
+	  Select this dram controller driver for Sun9i platforms,
+	  like A80.
+
+config DRAM_SUN50I_H6
+	bool
+	help
+	  Select this dram controller driver for some sun50i platforms,
+	  like H6.
+
+config DRAM_SUN50I_H616
+	bool
+	help
+	  Select this dram controller driver for some sun50i platforms,
+	  like H616.
+
+if DRAM_SUN50I_H616
+config DRAM_SUN50I_H616_WRITE_LEVELING
+	bool "H616 DRAM write leveling"
+	---help---
+	  Select this when DRAM on your H616 board needs write leveling.
+
+config DRAM_SUN50I_H616_READ_CALIBRATION
+	bool "H616 DRAM read calibration"
+	---help---
+	  Select this when DRAM on your H616 board needs read calibration.
+
+config DRAM_SUN50I_H616_READ_TRAINING
+	bool "H616 DRAM read training"
+	---help---
+	  Select this when DRAM on your H616 board needs read training.
+
+config DRAM_SUN50I_H616_WRITE_TRAINING
+	bool "H616 DRAM write training"
+	---help---
+	  Select this when DRAM on your H616 board needs write training.
+
+config DRAM_SUN50I_H616_BIT_DELAY_COMPENSATION
+	bool "H616 DRAM bit delay compensation"
+	---help---
+	  Select this when DRAM on your H616 board needs bit delay
+	  compensation.
+
+config DRAM_SUN50I_H616_UNKNOWN_FEATURE
+	bool "H616 DRAM unknown feature"
+	---help---
+	  Select this when DRAM on your H616 board needs this unknown
+	  feature.
+endif
+
+config SUN6I_P2WI
+	bool "Allwinner sun6i internal P2WI controller"
+	help
+	  If you say yes to this option, support will be included for the
+	  P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi
+	  SOCs.
+	  The P2WI looks like an SMBus controller (which supports only byte
+	  accesses), except that it only supports one slave device.
+	  This interface is used to connect to specific PMIC devices (like the
+	  AXP221).
+
+config SUN6I_PRCM
+	bool
+	help
+	  Support for the PRCM (Power/Reset/Clock Management) unit available
+	  in A31 SoC.
+
+config AXP_PMIC_BUS
+	bool "Sunxi AXP PMIC bus access helpers"
+	help
+	  Select this PMIC bus access helpers for Sunxi platform PRCM or other
+	  AXP family PMIC devices.
+
+config SUN8I_RSB
+	bool "Allwinner sunXi Reduced Serial Bus Driver"
+	help
+	  Say y here to enable support for Allwinner's Reduced Serial Bus
+	  (RSB) support. This controller is responsible for communicating
+	  with various RSB based devices, such as AXP223, AXP8XX PMICs,
+	  and AC100/AC200 ICs.
+
+config SUNXI_SRAM_ADDRESS
+	hex
+	default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
+	default 0x20000 if SUN50I_GEN_H6
+	default 0x0
+	---help---
+	Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
+	with the first SRAM region being located at address 0.
+	Some newer SoCs map the boot ROM at address 0 instead and move the
+	SRAM to a different address.
+
+config SUNXI_A64_TIMER_ERRATUM
+	bool
+
+# Note only one of these may be selected at a time! But hidden choices are
+# not supported by Kconfig
+config SUNXI_GEN_SUN4I
+	bool
+	---help---
+	Select this for sunxi SoCs which have resets and clocks set up
+	as the original A10 (mach-sun4i).
+
+config SUNXI_GEN_SUN6I
+	bool
+	---help---
+	Select this for sunxi SoCs which have sun6i like periphery, like
+	separate ahb reset control registers, custom pmic bus, new style
+	watchdog, etc.
+
+config SUN50I_GEN_H6
+	bool
+	select FIT
+	select SPL_LOAD_FIT
+	select SUPPORT_SPL
+	---help---
+	Select this for sunxi SoCs which have H6 like peripherals, clocks
+	and memory map.
+
+config SUNXI_DRAM_DW
+	bool
+	---help---
+	Select this for sunxi SoCs which uses a DRAM controller like the
+	DesignWare controller used in H3, mainly SoCs after H3, which do
+	not have official open-source DRAM initialization code, but can
+	use modified H3 DRAM initialization code.
+
+if SUNXI_DRAM_DW
+config SUNXI_DRAM_DW_16BIT
+	bool
+	---help---
+	Select this for sunxi SoCs with DesignWare DRAM controller and
+	have only 16-bit memory buswidth.
+
+config SUNXI_DRAM_DW_32BIT
+	bool
+	---help---
+	Select this for sunxi SoCs with DesignWare DRAM controller with
+	32-bit memory buswidth.
+endif
+
+config MACH_SUNXI_H3_H5
+	bool
+	select DM_I2C
+	select PHY_SUN4I_USB
+	select SUNXI_DE2
+	select SUNXI_DRAM_DW
+	select SUNXI_DRAM_DW_32BIT
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+
+# TODO: try out A80's 8GiB DRAM space
+# TODO: H616 supports 4 GiB DRAM space
+config SUNXI_DRAM_MAX_SIZE
+	hex
+	default 0xC0000000 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6 || MACH_SUN50I_H616
+	default 0x80000000
+
+choice
+	prompt "Sunxi SoC Variant"
+	optional
+
+config MACH_SUN4I
+	bool "sun4i (Allwinner A10)"
+	select CPU_V7A
+	select ARM_CORTEX_CPU_IS_UP
+	select PHY_SUN4I_USB
+	select DRAM_SUN4I
+	select SUNXI_GEN_SUN4I
+	select SUPPORT_SPL
+
+config MACH_SUN5I
+	bool "sun5i (Allwinner A13)"
+	select CPU_V7A
+	select ARM_CORTEX_CPU_IS_UP
+	select DRAM_SUN4I
+	select PHY_SUN4I_USB
+	select SUNXI_GEN_SUN4I
+	select SUPPORT_SPL
+	imply CONS_INDEX_2 if !DM_SERIAL
+
+config MACH_SUN6I
+	bool "sun6i (Allwinner A31)"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select DRAM_SUN6I
+	select PHY_SUN4I_USB
+	select SUN6I_P2WI
+	select SUN6I_PRCM
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN7I
+	bool "sun7i (Allwinner A20)"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select DRAM_SUN4I
+	select PHY_SUN4I_USB
+	select SUNXI_GEN_SUN4I
+	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN8I_A23
+	bool "sun8i (Allwinner A23)"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select DRAM_SUN8I_A23
+	select PHY_SUN4I_USB
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+	imply CONS_INDEX_5 if !DM_SERIAL
+
+config MACH_SUN8I_A33
+	bool "sun8i (Allwinner A33)"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select DRAM_SUN8I_A33
+	select PHY_SUN4I_USB
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+	imply CONS_INDEX_5 if !DM_SERIAL
+
+config MACH_SUN8I_A83T
+	bool "sun8i (Allwinner A83T)"
+	select CPU_V7A
+	select DRAM_SUN8I_A83T
+	select PHY_SUN4I_USB
+	select SUNXI_GEN_SUN6I
+	select MMC_SUNXI_HAS_NEW_MODE
+	select MMC_SUNXI_HAS_MODE_SWITCH
+	select SUPPORT_SPL
+
+config MACH_SUN8I_H3
+	bool "sun8i (Allwinner H3)"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select MACH_SUNXI_H3_H5
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN8I_R40
+	bool "sun8i (Allwinner R40)"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+	select SUNXI_DRAM_DW
+	select SUNXI_DRAM_DW_32BIT
+	select PHY_SUN4I_USB
+
+config MACH_SUN8I_V3S
+	bool "sun8i (Allwinner V3/V3s/S3/S3L)"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select SUNXI_GEN_SUN6I
+	select SUNXI_DRAM_DW
+	select SUNXI_DRAM_DW_16BIT
+	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN9I
+	bool "sun9i (Allwinner A80)"
+	select CPU_V7A
+	select DRAM_SUN9I
+	select SUN6I_PRCM
+	select SUNXI_GEN_SUN6I
+	select SUN8I_RSB
+	select SUPPORT_SPL
+
+config MACH_SUN50I
+	bool "sun50i (Allwinner A64)"
+	select ARM64
+	select SPI
+	select DM_I2C
+	select DM_SPI if SPI
+	select DM_SPI_FLASH
+	select PHY_SUN4I_USB
+	select SUN6I_PRCM
+	select SUNXI_DE2
+	select SUNXI_GEN_SUN6I
+	select MMC_SUNXI_HAS_NEW_MODE
+	select SUPPORT_SPL
+	select SUNXI_DRAM_DW
+	select SUNXI_DRAM_DW_32BIT
+	select FIT
+	select SPL_LOAD_FIT
+	select SUNXI_A64_TIMER_ERRATUM
+
+config MACH_SUN50I_H5
+	bool "sun50i (Allwinner H5)"
+	select ARM64
+	select MACH_SUNXI_H3_H5
+	select FIT
+	select SPL_LOAD_FIT
+
+config MACH_SUN50I_H6
+	bool "sun50i (Allwinner H6)"
+	select ARM64
+	select PHY_SUN4I_USB
+	select DRAM_SUN50I_H6
+	select SUN50I_GEN_H6
+
+config MACH_SUN50I_H616
+	bool "sun50i (Allwinner H616)"
+	select ARM64
+	select DRAM_SUN50I_H616
+	select SUN50I_GEN_H6
+
+endchoice
+
+# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
+config MACH_SUN8I
+	bool
+	select SUN8I_RSB
+	select SUN6I_PRCM
+	default y if MACH_SUN8I_A23
+	default y if MACH_SUN8I_A33
+	default y if MACH_SUN8I_A83T
+	default y if MACH_SUNXI_H3_H5
+	default y if MACH_SUN8I_R40
+	default y if MACH_SUN8I_V3S
+
+config RESERVE_ALLWINNER_BOOT0_HEADER
+	bool "reserve space for Allwinner boot0 header"
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+	---help---
+	Prepend a 1536 byte (empty) header to the U-Boot image file, to be
+	filled with magic values post build. The Allwinner provided boot0
+	blob relies on this information to load and execute U-Boot.
+	Only needed on 64-bit Allwinner boards so far when using boot0.
+
+config ARM_BOOT_HOOK_RMR
+	bool
+	depends on ARM64
+	default y
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+	---help---
+	Insert some ARM32 code at the very beginning of the U-Boot binary
+	which uses an RMR register write to bring the core into AArch64 mode.
+	The very first instruction acts as a switch, since it's carefully
+	chosen to be a NOP in one mode and a branch in the other, so the
+	code would only be executed if not already in AArch64.
+	This allows both the SPL and the U-Boot proper to be entered in
+	either mode and switch to AArch64 if needed.
+
+if SUNXI_DRAM_DW || DRAM_SUN50I_H6
+config SUNXI_DRAM_DDR3
+	bool
+
+config SUNXI_DRAM_DDR2
+	bool
+
+config SUNXI_DRAM_LPDDR3
+	bool
+
+choice
+	prompt "DRAM Type and Timing"
+	default SUNXI_DRAM_DDR3_1333 if !MACH_SUN8I_V3S
+	default SUNXI_DRAM_DDR2_V3S if MACH_SUN8I_V3S
+
+config SUNXI_DRAM_DDR3_1333
+	bool "DDR3 1333"
+	select SUNXI_DRAM_DDR3
+	---help---
+	This option is the original only supported memory type, which suits
+	many H3/H5/A64 boards available now.
+
+config SUNXI_DRAM_LPDDR3_STOCK
+	bool "LPDDR3 with Allwinner stock configuration"
+	select SUNXI_DRAM_LPDDR3
+	---help---
+	This option is the LPDDR3 timing used by the stock boot0 by
+	Allwinner.
+
+config SUNXI_DRAM_H6_LPDDR3
+	bool "LPDDR3 DRAM chips on the H6 DRAM controller"
+	select SUNXI_DRAM_LPDDR3
+	depends on DRAM_SUN50I_H6
+	---help---
+	This option is the LPDDR3 timing used by the stock boot0 by
+	Allwinner.
+
+config SUNXI_DRAM_H6_DDR3_1333
+	bool "DDR3-1333 boot0 timings on the H6 DRAM controller"
+	select SUNXI_DRAM_DDR3
+	depends on DRAM_SUN50I_H6
+	---help---
+	This option is the DDR3 timing used by the boot0 on H6 TV boxes
+	which use a DDR3-1333 timing.
+
+config SUNXI_DRAM_DDR2_V3S
+	bool "DDR2 found in V3s chip"
+	select SUNXI_DRAM_DDR2
+	depends on MACH_SUN8I_V3S
+	---help---
+	This option is only for the DDR2 memory chip which is co-packaged in
+	Allwinner V3s SoC.
+
+endchoice
+endif
+
+config DRAM_TYPE
+	int "sunxi dram type"
+	depends on MACH_SUN8I_A83T
+	default 3
+	---help---
+	Set the dram type, 3: DDR3, 7: LPDDR3
+
+config DRAM_CLK
+	int "sunxi dram clock speed"
+	default 792 if MACH_SUN9I
+	default 648 if MACH_SUN8I_R40
+	default 312 if MACH_SUN6I || MACH_SUN8I
+	default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || \
+		       MACH_SUN8I_V3S
+	default 672 if MACH_SUN50I
+	default 744 if MACH_SUN50I_H6
+	default 720 if MACH_SUN50I_H616
+	---help---
+	Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
+	must be a multiple of 24. For the sun9i (A80), the tested values
+	(for DDR3-1600) are 312 to 792.
+
+if MACH_SUN5I || MACH_SUN7I
+config DRAM_MBUS_CLK
+	int "sunxi mbus clock speed"
+	default 300
+	---help---
+	Set the mbus clock speed. The maximum on sun5i hardware is 300MHz.
+
+endif
+
+config DRAM_ZQ
+	int "sunxi dram zq value"
+	depends on !MACH_SUN50I_H616
+	default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || \
+		       MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_A83T
+	default 127 if MACH_SUN7I
+	default 14779 if MACH_SUN8I_V3S
+	default 3881979 if MACH_SUNXI_H3_H5 || MACH_SUN8I_R40 || MACH_SUN50I_H6
+	default 4145117 if MACH_SUN9I
+	default 3881915 if MACH_SUN50I
+	---help---
+	Set the dram zq value.
+
+config DRAM_ODT_EN
+	bool "sunxi dram odt enable"
+	default y if MACH_SUN8I_A23
+	default y if MACH_SUNXI_H3_H5
+	default y if MACH_SUN8I_R40
+	default y if MACH_SUN50I
+	default y if MACH_SUN50I_H6
+	default y if MACH_SUN50I_H616
+	---help---
+	Select this to enable dram odt (on die termination).
+
+if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+config DRAM_EMR1
+	int "sunxi dram emr1 value"
+	default 0 if MACH_SUN4I
+	default 4 if MACH_SUN5I || MACH_SUN7I
+	---help---
+	Set the dram controller emr1 value.
+
+config DRAM_TPR3
+	hex "sunxi dram tpr3 value"
+	default 0
+	---help---
+	Set the dram controller tpr3 parameter. This parameter configures
+	the delay on the command lane and also phase shifts, which are
+	applied for sampling incoming read data. The default value 0
+	means that no phase/delay adjustments are necessary. Properly
+	configuring this parameter increases reliability at high DRAM
+	clock speeds.
+
+config DRAM_DQS_GATING_DELAY
+	hex "sunxi dram dqs_gating_delay value"
+	default 0
+	---help---
+	Set the dram controller dqs_gating_delay parmeter. Each byte
+	encodes the DQS gating delay for each byte lane. The delay
+	granularity is 1/4 cycle. For example, the value 0x05060606
+	means that the delay is 5 quarter-cycles for one lane (1.25
+	cycles) and 6 quarter-cycles (1.5 cycles) for 3 other lanes.
+	The default value 0 means autodetection. The results of hardware
+	autodetection are not very reliable and depend on the chip
+	temperature (sometimes producing different results on cold start
+	and warm reboot). But the accuracy of hardware autodetection
+	is usually good enough, unless running at really high DRAM
+	clocks speeds (up to 600MHz). If unsure, keep as 0.
+
+choice
+	prompt "sunxi dram timings"
+	default DRAM_TIMINGS_VENDOR_MAGIC
+	---help---
+	Select the timings of the DDR3 chips.
+
+config DRAM_TIMINGS_VENDOR_MAGIC
+	bool "Magic vendor timings from Android"
+	---help---
+	The same DRAM timings as in the Allwinner boot0 bootloader.
+
+config DRAM_TIMINGS_DDR3_1066F_1333H
+	bool "JEDEC DDR3-1333H with down binning to DDR3-1066F"
+	---help---
+	Use the timings of the standard JEDEC DDR3-1066F speed bin for
+	DRAM_CLK <= 533MHz and the timings of the DDR3-1333H speed bin
+	for DRAM_CLK > 533MHz. This covers the majority of DDR3 chips
+	used in Allwinner A10/A13/A20 devices. In the case of DDR3-1333
+	or DDR3-1600 chips, be sure to check the DRAM datasheet to confirm
+	that down binning to DDR3-1066F is supported (because DDR3-1066F
+	uses a bit faster timings than DDR3-1333H).
+
+config DRAM_TIMINGS_DDR3_800E_1066G_1333J
+	bool "JEDEC DDR3-800E / DDR3-1066G / DDR3-1333J"
+	---help---
+	Use the timings of the slowest possible JEDEC speed bin for the
+	selected DRAM_CLK. Depending on the DRAM_CLK value, it may be
+	DDR3-800E, DDR3-1066G or DDR3-1333J.
+
+endchoice
+
+endif
+
+if MACH_SUN8I_A23
+config DRAM_ODT_CORRECTION
+	int "sunxi dram odt correction value"
+	default 0
+	---help---
+	Set the dram odt correction value (range -255 - 255). In allwinner
+	fex files, this option is found in bits 8-15 of the u32 odt_en variable
+	in the [dram] section. When bit 31 of the odt_en variable is set
+	then the correction is negative. Usually the value for this is 0.
+endif
+
+config SYS_CLK_FREQ
+	default 1008000000 if MACH_SUN4I
+	default 1008000000 if MACH_SUN5I
+	default 1008000000 if MACH_SUN6I
+	default 912000000 if MACH_SUN7I
+	default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
+	default 1008000000 if MACH_SUN8I
+	default 1008000000 if MACH_SUN9I
+	default 888000000 if MACH_SUN50I_H6
+	default 1008000000 if MACH_SUN50I_H616
+
+config SYS_CONFIG_NAME
+	default "sun4i" if MACH_SUN4I
+	default "sun5i" if MACH_SUN5I
+	default "sun6i" if MACH_SUN6I
+	default "sun7i" if MACH_SUN7I
+	default "sun8i" if MACH_SUN8I
+	default "sun9i" if MACH_SUN9I
+	default "sun50i" if MACH_SUN50I
+	default "sun50i" if MACH_SUN50I_H6
+	default "sun50i" if MACH_SUN50I_H616
+
+config SYS_BOARD
+	default "sunxi"
+
+config SYS_SOC
+	default "sunxi"
+
+config UART0_PORT_F
+	bool "UART0 on MicroSD breakout board"
+	default n
+	---help---
+	Repurpose the SD card slot for getting access to the UART0 serial
+	console. Primarily useful only for low level u-boot debugging on
+	tablets, where normal UART0 is difficult to access and requires
+	device disassembly and/or soldering. As the SD card can't be used
+	at the same time, the system can be only booted in the FEL mode.
+	Only enable this if you really know what you are doing.
+
+config OLD_SUNXI_KERNEL_COMPAT
+	bool "Enable workarounds for booting old kernels"
+	default n
+	---help---
+	Set this to enable various workarounds for old kernels, this results in
+	sub-optimal settings for newer kernels, only enable if needed.
+
+config MACPWR
+	string "MAC power pin"
+	default ""
+	help
+	  Set the pin used to power the MAC. This takes a string in the format
+	  understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config MMC0_CD_PIN
+	string "Card detect pin for mmc0"
+	default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I
+	default ""
+	---help---
+	Set the card detect pin for mmc0, leave empty to not use cd. This
+	takes a string in the format understood by sunxi_name_to_gpio, e.g.
+	PH1 for pin 1 of port H.
+
+config MMC1_CD_PIN
+	string "Card detect pin for mmc1"
+	default ""
+	---help---
+	See MMC0_CD_PIN help text.
+
+config MMC2_CD_PIN
+	string "Card detect pin for mmc2"
+	default ""
+	---help---
+	See MMC0_CD_PIN help text.
+
+config MMC3_CD_PIN
+	string "Card detect pin for mmc3"
+	default ""
+	---help---
+	See MMC0_CD_PIN help text.
+
+config MMC1_PINS
+	string "Pins for mmc1"
+	default ""
+	---help---
+	Set the pins used for mmc1, when applicable. This takes a string in the
+	format understood by sunxi_name_to_gpio_bank, e.g. PH for port H.
+
+config MMC2_PINS
+	string "Pins for mmc2"
+	default ""
+	---help---
+	See MMC1_PINS help text.
+
+config MMC3_PINS
+	string "Pins for mmc3"
+	default ""
+	---help---
+	See MMC1_PINS help text.
+
+config MMC_SUNXI_SLOT_EXTRA
+	int "mmc extra slot number"
+	default -1
+	---help---
+	sunxi builds always enable mmc0, some boards also have a second sdcard
+	slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
+	support for this.
+
+config INITIAL_USB_SCAN_DELAY
+	int "delay initial usb scan by x ms to allow builtin devices to init"
+	default 0
+	---help---
+	Some boards have on board usb devices which need longer than the
+	USB spec's 1 second to connect from board powerup. Set this config
+	option to a non 0 value to add an extra delay before the first usb
+	bus scan.
+
+config USB0_VBUS_PIN
+	string "Vbus enable pin for usb0 (otg)"
+	default ""
+	---help---
+	Set the Vbus enable pin for usb0 (otg). This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config USB0_VBUS_DET
+	string "Vbus detect pin for usb0 (otg)"
+	default ""
+	---help---
+	Set the Vbus detect pin for usb0 (otg). This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config USB0_ID_DET
+	string "ID detect pin for usb0 (otg)"
+	default ""
+	---help---
+	Set the ID detect pin for usb0 (otg). This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config USB1_VBUS_PIN
+	string "Vbus enable pin for usb1 (ehci0)"
+	default "PH6" if MACH_SUN4I || MACH_SUN7I
+	default "PH27" if MACH_SUN6I
+	---help---
+	Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
+	a string in the format understood by sunxi_name_to_gpio, e.g.
+	PH1 for pin 1 of port H.
+
+config USB2_VBUS_PIN
+	string "Vbus enable pin for usb2 (ehci1)"
+	default "PH3" if MACH_SUN4I || MACH_SUN7I
+	default "PH24" if MACH_SUN6I
+	---help---
+	See USB1_VBUS_PIN help text.
+
+config USB3_VBUS_PIN
+	string "Vbus enable pin for usb3 (ehci2)"
+	default ""
+	---help---
+	See USB1_VBUS_PIN help text.
+
+config I2C0_ENABLE
+	bool "Enable I2C/TWI controller 0"
+	default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_R40
+	default n if MACH_SUN6I || MACH_SUN8I
+	select CMD_I2C
+	---help---
+	This allows enabling I2C/TWI controller 0 by muxing its pins, enabling
+	its clock and setting up the bus. This is especially useful on devices
+	with slaves connected to the bus or with pins exposed through e.g. an
+	expansion port/header.
+
+config I2C1_ENABLE
+	bool "Enable I2C/TWI controller 1"
+	default n
+	select CMD_I2C
+	---help---
+	See I2C0_ENABLE help text.
+
+config I2C2_ENABLE
+	bool "Enable I2C/TWI controller 2"
+	default n
+	select CMD_I2C
+	---help---
+	See I2C0_ENABLE help text.
+
+if MACH_SUN6I || MACH_SUN7I
+config I2C3_ENABLE
+	bool "Enable I2C/TWI controller 3"
+	default n
+	select CMD_I2C
+	---help---
+	See I2C0_ENABLE help text.
+endif
+
+if SUNXI_GEN_SUN6I || SUN50I_GEN_H6
+config R_I2C_ENABLE
+	bool "Enable the PRCM I2C/TWI controller"
+	# This is used for the pmic on H3
+	default y if SY8106A_POWER
+	select CMD_I2C
+	---help---
+	Set this to y to enable the I2C controller which is part of the PRCM.
+endif
+
+if MACH_SUN7I
+config I2C4_ENABLE
+	bool "Enable I2C/TWI controller 4"
+	default n
+	select CMD_I2C
+	---help---
+	See I2C0_ENABLE help text.
+endif
+
+config AXP_GPIO
+	bool "Enable support for gpio-s on axp PMICs"
+	default n
+	---help---
+	Say Y here to enable support for the gpio pins of the axp PMIC ICs.
+
+config VIDEO_SUNXI
+	bool "Enable graphical uboot console on HDMI, LCD or VGA"
+	depends on !MACH_SUN8I_A83T
+	depends on !MACH_SUNXI_H3_H5
+	depends on !MACH_SUN8I_R40
+	depends on !MACH_SUN8I_V3S
+	depends on !MACH_SUN9I
+	depends on !MACH_SUN50I
+	depends on !SUN50I_GEN_H6
+	select DM_VIDEO
+	select DISPLAY
+	imply VIDEO_DT_SIMPLEFB
+	default y
+	---help---
+	Say Y here to add support for using a graphical console on the HDMI,
+	LCD or VGA output found on older sunxi devices. This will also provide
+	a simple_framebuffer device for Linux.
+
+config VIDEO_HDMI
+	bool "HDMI output support"
+	depends on VIDEO_SUNXI && !MACH_SUN8I
+	default y
+	---help---
+	Say Y here to add support for outputting video over HDMI.
+
+config VIDEO_VGA
+	bool "VGA output support"
+	depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN7I)
+	default n
+	---help---
+	Say Y here to add support for outputting video over VGA.
+
+config VIDEO_VGA_VIA_LCD
+	bool "VGA via LCD controller support"
+	depends on VIDEO_SUNXI && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
+	default n
+	---help---
+	Say Y here to add support for external DACs connected to the parallel
+	LCD interface driving a VGA connector, such as found on the
+	Olimex A13 boards.
+
+config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
+	bool "Force sync active high for VGA via LCD controller support"
+	depends on VIDEO_VGA_VIA_LCD
+	default n
+	---help---
+	Say Y here if you've a board which uses opendrain drivers for the vga
+	hsync and vsync signals. Opendrain drivers cannot generate steep enough
+	positive edges for a stable video output, so on boards with opendrain
+	drivers the sync signals must always be active high.
+
+config VIDEO_VGA_EXTERNAL_DAC_EN
+	string "LCD panel power enable pin"
+	depends on VIDEO_VGA_VIA_LCD
+	default ""
+	---help---
+	Set the enable pin for the external VGA DAC. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_COMPOSITE
+	bool "Composite video output support"
+	depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
+	default n
+	---help---
+	Say Y here to add support for outputting composite video.
+
+config VIDEO_LCD_MODE
+	string "LCD panel timing details"
+	depends on VIDEO_SUNXI
+	default ""
+	---help---
+	LCD panel timing details string, leave empty if there is no LCD panel.
+	This is in drivers/video/videomodes.c: video_get_params() format, e.g.
+	x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
+	Also see: http://linux-sunxi.org/LCD
+
+config VIDEO_LCD_DCLK_PHASE
+	int "LCD panel display clock phase"
+	depends on VIDEO_SUNXI || DM_VIDEO
+	default 1
+	---help---
+	Select LCD panel display clock phase shift, range 0-3.
+
+config VIDEO_LCD_POWER
+	string "LCD panel power enable pin"
+	depends on VIDEO_SUNXI
+	default ""
+	---help---
+	Set the power enable pin for the LCD panel. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_RESET
+	string "LCD panel reset pin"
+	depends on VIDEO_SUNXI
+	default ""
+	---help---
+	Set the reset pin for the LCD panel. This takes a string in the format
+	understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_BL_EN
+	string "LCD panel backlight enable pin"
+	depends on VIDEO_SUNXI
+	default ""
+	---help---
+	Set the backlight enable pin for the LCD panel. This takes a string in the
+	the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of
+	port H.
+
+config VIDEO_LCD_BL_PWM
+	string "LCD panel backlight pwm pin"
+	depends on VIDEO_SUNXI
+	default ""
+	---help---
+	Set the backlight pwm pin for the LCD panel. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_BL_PWM_ACTIVE_LOW
+	bool "LCD panel backlight pwm is inverted"
+	depends on VIDEO_SUNXI
+	default y
+	---help---
+	Set this if the backlight pwm output is active low.
+
+config VIDEO_LCD_PANEL_I2C
+	bool "LCD panel needs to be configured via i2c"
+	depends on VIDEO_SUNXI
+	default n
+	select CMD_I2C
+	---help---
+	Say y here if the LCD panel needs to be configured via i2c. This
+	will add a bitbang i2c controller using gpios to talk to the LCD.
+
+config VIDEO_LCD_PANEL_I2C_SDA
+	string "LCD panel i2c interface SDA pin"
+	depends on VIDEO_LCD_PANEL_I2C
+	default "PG12"
+	---help---
+	Set the SDA pin for the LCD i2c interface. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_PANEL_I2C_SCL
+	string "LCD panel i2c interface SCL pin"
+	depends on VIDEO_LCD_PANEL_I2C
+	default "PG10"
+	---help---
+	Set the SCL pin for the LCD i2c interface. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+
+# Note only one of these may be selected at a time! But hidden choices are
+# not supported by Kconfig
+config VIDEO_LCD_IF_PARALLEL
+	bool
+
+config VIDEO_LCD_IF_LVDS
+	bool
+
+config SUNXI_DE2
+	bool
+	default n
+
+config VIDEO_DE2
+	bool "Display Engine 2 video driver"
+	depends on SUNXI_DE2
+	select DM_VIDEO
+	select DISPLAY
+	select VIDEO_DW_HDMI
+	imply VIDEO_DT_SIMPLEFB
+	default y
+	---help---
+	Say y here if you want to build DE2 video driver which is present on
+	newer SoCs. Currently only HDMI output is supported.
+
+
+choice
+	prompt "LCD panel support"
+	depends on VIDEO_SUNXI
+	---help---
+	Select which type of LCD panel to support.
+
+config VIDEO_LCD_PANEL_PARALLEL
+	bool "Generic parallel interface LCD panel"
+	select VIDEO_LCD_IF_PARALLEL
+
+config VIDEO_LCD_PANEL_LVDS
+	bool "Generic lvds interface LCD panel"
+	select VIDEO_LCD_IF_LVDS
+
+config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828
+	bool "MIPI 4-lane, 513Mbps LCD panel via SSD2828 bridge chip"
+	select VIDEO_LCD_SSD2828
+	select VIDEO_LCD_IF_PARALLEL
+	---help---
+	7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0
+
+config VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804
+	bool "eDP 4-lane, 1.62G LCD panel via ANX9804 bridge chip"
+	select VIDEO_LCD_ANX9804
+	select VIDEO_LCD_IF_PARALLEL
+	select VIDEO_LCD_PANEL_I2C
+	---help---
+	Select this for eDP LCD panels with 4 lanes running at 1.62G,
+	connected via an ANX9804 bridge chip.
+
+config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
+	bool "Hitachi tx18d42vm LCD panel"
+	select VIDEO_LCD_HITACHI_TX18D42VM
+	select VIDEO_LCD_IF_LVDS
+	---help---
+	7.85" 1024x768 Hitachi tx18d42vm LCD panel support
+
+config VIDEO_LCD_TL059WV5C0
+	bool "tl059wv5c0 LCD panel"
+	select VIDEO_LCD_PANEL_I2C
+	select VIDEO_LCD_IF_PARALLEL
+	---help---
+	6" 480x800 tl059wv5c0 panel support, as used on the Utoo P66 and
+	Aigo M60/M608/M606 tablets.
+
+endchoice
+
+config SATAPWR
+	string "SATA power pin"
+	default ""
+	help
+	  Set the pins used to power the SATA. This takes a string in the
+	  format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of
+	  port H.
+
+config GMAC_TX_DELAY
+	int "GMAC Transmit Clock Delay Chain"
+	default 0
+	---help---
+	Set the GMAC Transmit Clock Delay Chain value.
+
+config SPL_STACK_R_ADDR
+	default 0x4fe00000 if MACH_SUN4I
+	default 0x4fe00000 if MACH_SUN5I
+	default 0x4fe00000 if MACH_SUN6I
+	default 0x4fe00000 if MACH_SUN7I
+	default 0x4fe00000 if MACH_SUN8I
+	default 0x2fe00000 if MACH_SUN9I
+	default 0x4fe00000 if MACH_SUN50I
+	default 0x4fe00000 if SUN50I_GEN_H6
+
+config SPL_SPI_SUNXI
+	bool "Support for SPI Flash on Allwinner SoCs in SPL"
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6
+	help
+	  Enable support for SPI Flash. This option allows SPL to read from
+	  sunxi SPI Flash. It uses the same method as the boot ROM, so does
+	  not need any extra configuration.
+
+config PINE64_DT_SELECTION
+	bool "Enable Pine64 device tree selection code"
+	depends on MACH_SUN50I
+	help
+	  The original Pine A64 and Pine A64+ are similar but different
+	  boards and can be differed by the DRAM size. Pine A64 has
+	  512MiB DRAM, and Pine A64+ has 1GiB or 2GiB. By selecting this
+	  option, the device tree selection code specific to Pine64 which
+	  utilizes the DRAM size will be enabled.
+
+config PINEPHONE_DT_SELECTION
+	bool "Enable PinePhone device tree selection code"
+	depends on MACH_SUN50I
+	help
+	  Enable this option to automatically select the device tree for the
+	  correct PinePhone hardware revision during boot.
+
+config BLUETOOTH_DT_DEVICE_FIXUP
+	string "Fixup the Bluetooth controller address"
+	default ""
+	help
+	  This option specifies the DT compatible name of the Bluetooth
+	  controller for which to set the "local-bd-address" property.
+	  Set this option if your device ships with the Bluetooth controller
+	  default address.
+	  The used address is "bdaddr" if set, and "ethaddr" with the LSB
+	  flipped elsewise.
+
+endif
+
+config CHIP_DIP_SCAN
+	bool "Enable DIPs detection for CHIP board"
+	select SUPPORT_EXTENSION_SCAN
+	select W1
+	select W1_GPIO
+	select W1_EEPROM
+	select W1_EEPROM_DS24XXX
+	select CMD_EXTENSION
diff --git a/roms/u-boot/arch/arm/mach-sunxi/Makefile b/roms/u-boot/arch/arm/mach-sunxi/Makefile
new file mode 100644
index 000000000..3f081d92f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/Makefile
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other Makefile
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	+= board.o
+obj-y	+= clock.o
+obj-y	+= cpu_info.o
+obj-y	+= dram_helpers.o
+obj-y	+= pinmux.o
+obj-$(CONFIG_SUN6I_P2WI)	+= p2wi.o
+obj-$(CONFIG_SUN6I_PRCM)	+= prcm.o
+obj-$(CONFIG_AXP_PMIC_BUS)	+= pmic_bus.o
+obj-$(CONFIG_SUN8I_RSB)		+= rsb.o
+obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN5I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN6I)	+= clock_sun6i.o
+obj-$(CONFIG_MACH_SUN7I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN50I)	+= clock_sun6i.o
+ifdef CONFIG_MACH_SUN8I_A83T
+obj-y				+= clock_sun8i_a83t.o
+else
+obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
+endif
+obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o gtbus_sun9i.o
+obj-$(CONFIG_SUN50I_GEN_H6)	+= clock_sun50i_h6.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_DRAM_SUN4I)	+= dram_sun4i.o
+obj-$(CONFIG_DRAM_SUN6I)	+= dram_sun6i.o
+obj-$(CONFIG_DRAM_SUN8I_A23)	+= dram_sun8i_a23.o
+obj-$(CONFIG_DRAM_SUN8I_A33)	+= dram_sun8i_a33.o
+obj-$(CONFIG_DRAM_SUN8I_A83T)	+= dram_sun8i_a83t.o
+obj-$(CONFIG_DRAM_SUN9I)	+= dram_sun9i.o
+obj-$(CONFIG_SPL_SPI_SUNXI)	+= spl_spi_sunxi.o
+obj-$(CONFIG_SUNXI_DRAM_DW)	+= dram_sunxi_dw.o
+obj-$(CONFIG_SUNXI_DRAM_DW)	+= dram_timings/
+obj-$(CONFIG_DRAM_SUN50I_H6)	+= dram_sun50i_h6.o
+obj-$(CONFIG_DRAM_SUN50I_H6)	+= dram_timings/
+obj-$(CONFIG_DRAM_SUN50I_H616)	+= dram_sun50i_h616.o
+obj-$(CONFIG_DRAM_SUN50I_H616)	+= dram_timings/
+endif
diff --git a/roms/u-boot/arch/arm/mach-sunxi/board.c b/roms/u-boot/arch/arm/mach-sunxi/board.c
new file mode 100644
index 000000000..9b84132ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/board.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some init for sunxi platform.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <log.h>
+#include <mmc.h>
+#include <i2c.h>
+#include <serial.h>
+#include <spl.h>
+#include <asm/cache.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/tzpc.h>
+#include <asm/arch/mmc.h>
+
+#include <linux/compiler.h>
+
+struct fel_stash {
+	uint32_t sp;
+	uint32_t lr;
+	uint32_t cpsr;
+	uint32_t sctlr;
+	uint32_t vbar;
+	uint32_t cr;
+};
+
+struct fel_stash fel_stash __section(".data");
+
+#ifdef CONFIG_ARM64
+#include <asm/armv8/mmu.h>
+
+static struct mm_region sunxi_mem_map[] = {
+	{
+		/* SRAM, MMIO regions */
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		/* RAM */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0xC0000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+struct mm_region *mem_map = sunxi_mem_map;
+#endif
+
+static int gpio_init(void)
+{
+	__maybe_unused uint val;
+#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
+	/* disable GPB22,23 as uart0 tx,rx to avoid conflict */
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
+#endif
+#if defined(CONFIG_MACH_SUN8I) && !defined(CONFIG_MACH_SUN8I_R40)
+	sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
+#else
+	sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
+#endif
+	sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || \
+				 defined(CONFIG_MACH_SUN7I) || \
+				 defined(CONFIG_MACH_SUN8I_R40))
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A33)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUNXI_H3_H5)
+	sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_GPB_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_GPB_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H6)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H6_GPH_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H6_GPH_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H616)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H616_GPH_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H616_GPH_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_V3S)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN8I_V3S_GPB_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_V3S_GPB_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPH(13), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
+	sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
+	sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
+	sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN8I) && \
+				!defined(CONFIG_MACH_SUN8I_R40)
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(6), SUN8I_GPG_UART1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(7), SUN8I_GPG_UART1);
+	sunxi_gpio_set_pull(SUNXI_GPG(7), SUNXI_GPIO_PULL_UP);
+#else
+#error Unsupported console port number. Please fix pin mux settings in board.c
+#endif
+
+#ifdef CONFIG_SUN50I_GEN_H6
+	/* Update PIO power bias configuration by copy hardware detected value */
+	val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
+	writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
+	val = readl(SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
+	writel(val, SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
+#endif
+
+	return 0;
+}
+
+#if defined(CONFIG_SPL_BOARD_LOAD_IMAGE) && defined(CONFIG_SPL_BUILD)
+static int spl_board_load_image(struct spl_image_info *spl_image,
+				struct spl_boot_device *bootdev)
+{
+	debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr);
+	return_to_fel(fel_stash.sp, fel_stash.lr);
+
+	return 0;
+}
+SPL_LOAD_IMAGE_METHOD("FEL", 0, BOOT_DEVICE_BOARD, spl_board_load_image);
+#endif
+
+void s_init(void)
+{
+	/*
+	 * Undocumented magic taken from boot0, without this DRAM
+	 * access gets messed up (seems cache related).
+	 * The boot0 sources describe this as: "config ema for cache sram"
+	 */
+#if defined CONFIG_MACH_SUN6I
+	setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
+#elif defined CONFIG_MACH_SUN8I
+	__maybe_unused uint version;
+
+	/* Unlock sram version info reg, read it, relock */
+	setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+	version = readl(SUNXI_SRAMC_BASE + 0x24) >> 16;
+	clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+
+	/*
+	 * Ideally this would be a switch case, but we do not know exactly
+	 * which versions there are and which version needs which settings,
+	 * so reproduce the per SoC code from the BSP.
+	 */
+#if defined CONFIG_MACH_SUN8I_A23
+	if (version == 0x1650)
+		setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
+	else /* 0x1661 ? */
+		setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
+#elif defined CONFIG_MACH_SUN8I_A33
+	if (version != 0x1667)
+		setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
+#endif
+	/* A83T BSP never modifies SUNXI_SRAMC_BASE + 0x44 */
+	/* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */
+#endif
+
+#if !defined(CONFIG_ARM_CORTEX_CPU_IS_UP) && !defined(CONFIG_ARM64)
+	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
+	asm volatile(
+		"mrc p15, 0, r0, c1, c0, 1\n"
+		"orr r0, r0, #1 << 6\n"
+		"mcr p15, 0, r0, c1, c0, 1\n"
+		::: "r0");
+#endif
+#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3
+	/* Enable non-secure access to some peripherals */
+	tzpc_init();
+#endif
+
+	clock_init();
+	timer_init();
+	gpio_init();
+#if !CONFIG_IS_ENABLED(DM_I2C)
+	i2c_init_board();
+#endif
+	eth_init_board();
+}
+
+#define SUNXI_INVALID_BOOT_SOURCE	-1
+
+static int sunxi_get_boot_source(void)
+{
+	if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
+		return SUNXI_INVALID_BOOT_SOURCE;
+
+	return readb(SPL_ADDR + 0x28);
+}
+
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ */
+uint32_t sunxi_get_boot_device(void)
+{
+	int boot_source = sunxi_get_boot_source();
+
+	/*
+	 * When booting from the SD card or NAND memory, the "eGON.BT0"
+	 * signature is expected to be found in memory at the address 0x0004
+	 * (see the "mksunxiboot" tool, which generates this header).
+	 *
+	 * When booting in the FEL mode over USB, this signature is patched in
+	 * memory and replaced with something else by the 'fel' tool. This other
+	 * signature is selected in such a way, that it can't be present in a
+	 * valid bootable SD card image (because the BROM would refuse to
+	 * execute the SPL in this case).
+	 *
+	 * This checks for the signature and if it is not found returns to
+	 * the FEL code in the BROM to wait and receive the main u-boot
+	 * binary over USB. If it is found, it determines where SPL was
+	 * read from.
+	 */
+	switch (boot_source) {
+	case SUNXI_INVALID_BOOT_SOURCE:
+		return BOOT_DEVICE_BOARD;
+	case SUNXI_BOOTED_FROM_MMC0:
+	case SUNXI_BOOTED_FROM_MMC0_HIGH:
+		return BOOT_DEVICE_MMC1;
+	case SUNXI_BOOTED_FROM_NAND:
+		return BOOT_DEVICE_NAND;
+	case SUNXI_BOOTED_FROM_MMC2:
+	case SUNXI_BOOTED_FROM_MMC2_HIGH:
+		return BOOT_DEVICE_MMC2;
+	case SUNXI_BOOTED_FROM_SPI:
+		return BOOT_DEVICE_SPI;
+	}
+
+	panic("Unknown boot source %d\n", boot_source);
+	return -1;		/* Never reached */
+}
+
+#ifdef CONFIG_SPL_BUILD
+static u32 sunxi_get_spl_size(void)
+{
+	if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
+		return 0;
+
+	return readl(SPL_ADDR + 0x10);
+}
+
+/*
+ * The eGON SPL image can be located at 8KB or at 128KB into an SD card or
+ * an eMMC device. The boot source has bit 4 set in the latter case.
+ * By adding 120KB to the normal offset when booting from a "high" location
+ * we can support both cases.
+ * Also U-Boot proper is located at least 32KB after the SPL, but will
+ * immediately follow the SPL if that is bigger than that.
+ */
+unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
+					   unsigned long raw_sect)
+{
+	unsigned long spl_size = sunxi_get_spl_size();
+	unsigned long sector;
+
+	sector = max(raw_sect, spl_size / 512);
+
+	switch (sunxi_get_boot_source()) {
+	case SUNXI_BOOTED_FROM_MMC0_HIGH:
+	case SUNXI_BOOTED_FROM_MMC2_HIGH:
+		sector += (128 - 8) * 2;
+		break;
+	}
+
+	return sector;
+}
+
+u32 spl_boot_device(void)
+{
+	return sunxi_get_boot_device();
+}
+
+void board_init_f(ulong dummy)
+{
+	spl_init();
+	preloader_console_init();
+
+#ifdef CONFIG_SPL_I2C_SUPPORT
+	/* Needed early by sunxi_board_init if PMU is enabled */
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+	sunxi_board_init();
+}
+#endif
+
+void reset_cpu(void)
+{
+#if defined(CONFIG_SUNXI_GEN_SUN4I) || defined(CONFIG_MACH_SUN8I_R40)
+	static const struct sunxi_wdog *wdog =
+		 &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+	/* Set the watchdog for its shortest interval (.5s) and wait */
+	writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
+	writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
+
+	while (1) {
+		/* sun5i sometimes gets stuck without this */
+		writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
+	}
+#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
+#if defined(CONFIG_MACH_SUN50I_H6)
+	/* WDOG is broken for some H6 rev. use the R_WDOG instead */
+	static const struct sunxi_wdog *wdog =
+		(struct sunxi_wdog *)SUNXI_R_WDOG_BASE;
+#else
+	static const struct sunxi_wdog *wdog =
+		((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+#endif
+	/* Set the watchdog for its shortest interval (.5s) and wait */
+	writel(WDT_CFG_RESET, &wdog->cfg);
+	writel(WDT_MODE_EN, &wdog->mode);
+	writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
+	while (1) { }
+#endif
+}
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-sunxi/clock.c b/roms/u-boot/arch/arm/mach-sunxi/clock.c
new file mode 100644
index 000000000..f591affeb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/clock.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/gtbus.h>
+#include <asm/arch/sys_proto.h>
+
+__weak void clock_init_sec(void)
+{
+}
+
+__weak void gtbus_init(void)
+{
+}
+
+int clock_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	clock_init_safe();
+	gtbus_init();
+#endif
+	clock_init_uart();
+	clock_init_sec();
+
+	return 0;
+}
+
+/* These functions are shared between various SoCs so put them here. */
+#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN9I
+int clock_twi_onoff(int port, int state)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	if (port == 5) {
+		if (state)
+			prcm_apb0_enable(
+				PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+		else
+			prcm_apb0_disable(
+				PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+		return 0;
+	}
+
+	/* set the apb clock gate and reset for twi */
+	if (state) {
+		setbits_le32(&ccm->apb2_gate,
+			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
+		setbits_le32(&ccm->apb2_reset_cfg,
+			     1 << (APB2_RESET_TWI_SHIFT + port));
+	} else {
+		clrbits_le32(&ccm->apb2_reset_cfg,
+			     1 << (APB2_RESET_TWI_SHIFT + port));
+		clrbits_le32(&ccm->apb2_gate,
+			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
+	}
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-sunxi/clock_sun4i.c b/roms/u-boot/arch/arm/mach-sunxi/clock_sun4i.c
new file mode 100644
index 000000000..57ee018ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/clock_sun4i.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sun4i, sun5i and sun7i specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* Set safe defaults until PMU is configured */
+	writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+	       AHB_DIV_2 << AHB_DIV_SHIFT |
+	       APB0_DIV_1 << APB0_DIV_SHIFT |
+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_ahb_apb0_cfg);
+	writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
+	sdelay(200);
+	writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+	       AHB_DIV_2 << AHB_DIV_SHIFT |
+	       APB0_DIV_1 << APB0_DIV_SHIFT |
+	       CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_ahb_apb0_cfg);
+#ifdef CONFIG_MACH_SUN7I
+	setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA);
+#endif
+	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+#ifdef CONFIG_SUNXI_AHCI
+	setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_SATA);
+	setbits_le32(&ccm->pll6_cfg, 0x1 << CCM_PLL6_CTRL_SATA_EN_SHIFT);
+#endif
+}
+#endif
+
+void clock_init_uart(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* uart clock source is apb1 */
+	writel(APB1_CLK_SRC_OSC24M|
+	       APB1_CLK_RATE_N_1|
+	       APB1_CLK_RATE_M(1),
+	       &ccm->apb1_clk_div_cfg);
+
+	/* open the clock for uart */
+	setbits_le32(&ccm->apb1_gate,
+		CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX - 1));
+}
+
+int clock_twi_onoff(int port, int state)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* set the apb clock gate for twi */
+	if (state)
+		setbits_le32(&ccm->apb1_gate,
+			     CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+	else
+		clrbits_le32(&ccm->apb1_gate,
+			     CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#define PLL1_CFG(N, K, M, P)	( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \
+				  0 << CCM_PLL1_CFG_VCO_RST_SHIFT |  \
+				  8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \
+				  0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \
+				 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \
+				 (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \
+				  2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \
+				 (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \
+				 (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \
+				  0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \
+				  0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \
+				 (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT)
+
+static struct {
+	u32 pll1_cfg;
+	unsigned int freq;
+} pll1_para[] = {
+	/* This array must be ordered by frequency. */
+	{ PLL1_CFG(31, 1, 0, 0), 1488000000},
+	{ PLL1_CFG(30, 1, 0, 0), 1440000000},
+	{ PLL1_CFG(29, 1, 0, 0), 1392000000},
+	{ PLL1_CFG(28, 1, 0, 0), 1344000000},
+	{ PLL1_CFG(27, 1, 0, 0), 1296000000},
+	{ PLL1_CFG(26, 1, 0, 0), 1248000000},
+	{ PLL1_CFG(25, 1, 0, 0), 1200000000},
+	{ PLL1_CFG(24, 1, 0, 0), 1152000000},
+	{ PLL1_CFG(23, 1, 0, 0), 1104000000},
+	{ PLL1_CFG(22, 1, 0, 0), 1056000000},
+	{ PLL1_CFG(21, 1, 0, 0), 1008000000},
+	{ PLL1_CFG(20, 1, 0, 0), 960000000 },
+	{ PLL1_CFG(19, 1, 0, 0), 912000000 },
+	{ PLL1_CFG(16, 1, 0, 0), 768000000 },
+	/* Final catchall entry 384MHz*/
+	{ PLL1_CFG(16, 0, 0, 0), 0 },
+
+};
+
+void clock_set_pll1(unsigned int hz)
+{
+	int i = 0;
+	int axi, ahb, apb0;
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* Find target frequency */
+	while (pll1_para[i].freq > hz)
+		i++;
+
+	hz = pll1_para[i].freq;
+	if (! hz)
+		hz = 384000000;
+
+	/* Calculate system clock divisors */
+	axi = DIV_ROUND_UP(hz, 432000000);	/* Max 450MHz */
+	ahb = DIV_ROUND_UP(hz/axi, 204000000);	/* Max 250MHz */
+	apb0 = 2;				/* Max 150MHz */
+
+	printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0);
+
+	/* Map divisors to register values */
+	axi = axi - 1;
+	if (ahb > 4)
+		ahb = 3;
+	else if (ahb > 2)
+		ahb = 2;
+	else if (ahb > 1)
+		ahb = 1;
+	else
+		ahb = 0;
+
+	apb0 = apb0 - 1;
+
+	/* Switch to 24MHz clock while changing PLL1 */
+	writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+	       AHB_DIV_2 << AHB_DIV_SHIFT |
+	       APB0_DIV_1 << APB0_DIV_SHIFT |
+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_ahb_apb0_cfg);
+	sdelay(20);
+
+	/* Configure sys clock divisors */
+	writel(axi << AXI_DIV_SHIFT |
+	       ahb << AHB_DIV_SHIFT |
+	       apb0 << APB0_DIV_SHIFT |
+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_ahb_apb0_cfg);
+
+	/* Configure PLL1 at the desired frequency */
+	writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg);
+	sdelay(200);
+
+	/* Switch CPU to PLL1 */
+	writel(axi << AXI_DIV_SHIFT |
+	       ahb << AHB_DIV_SHIFT |
+	       apb0 << APB0_DIV_SHIFT |
+	       CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_ahb_apb0_cfg);
+	sdelay(20);
+}
+#endif
+
+void clock_set_pll3(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	if (clk == 0) {
+		clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
+		return;
+	}
+
+	/* PLL3 rate = 3000000 * m */
+	writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+	       CCM_PLL3_CTRL_M(clk / 3000000), &ccm->pll3_cfg);
+}
+
+unsigned int clock_get_pll3(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	uint32_t rval = readl(&ccm->pll3_cfg);
+	int m = ((rval & CCM_PLL3_CTRL_M_MASK) >> CCM_PLL3_CTRL_M_SHIFT);
+	return 3000000 * m;
+}
+
+unsigned int clock_get_pll5p(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	uint32_t rval = readl(&ccm->pll5_cfg);
+	int n = ((rval & CCM_PLL5_CTRL_N_MASK) >> CCM_PLL5_CTRL_N_SHIFT);
+	int k = ((rval & CCM_PLL5_CTRL_K_MASK) >> CCM_PLL5_CTRL_K_SHIFT) + 1;
+	int p = ((rval & CCM_PLL5_CTRL_P_MASK) >> CCM_PLL5_CTRL_P_SHIFT);
+	return (24000000 * n * k) >> p;
+}
+
+unsigned int clock_get_pll6(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	uint32_t rval = readl(&ccm->pll6_cfg);
+	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+	int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
+	return 24000000 * n * k / 2;
+}
+
+void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
+{
+	int pll = clock_get_pll5p();
+	int div = 1;
+
+	while ((pll / div) > hz)
+		div++;
+
+	writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_RST | CCM_DE_CTRL_PLL5P |
+	       CCM_DE_CTRL_M(div), clk_cfg);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/clock_sun50i_h6.c b/roms/u-boot/arch/arm/mach-sunxi/clock_sun50i_h6.c
new file mode 100644
index 000000000..492fc4a3f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -0,0 +1,132 @@
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* this seems to enable PLLs on H616 */
+	if (IS_ENABLED(CONFIG_MACH_SUN50I_H616))
+		setbits_le32(SUNXI_PRCM_BASE + 0x250, 0x10);
+
+	clock_set_pll1(408000000);
+
+	writel(CCM_PLL6_DEFAULT, &ccm->pll6_cfg);
+	while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_LOCK))
+		;
+
+	clrsetbits_le32(&ccm->cpu_axi_cfg, CCM_CPU_AXI_APB_MASK | CCM_CPU_AXI_AXI_MASK,
+			CCM_CPU_AXI_DEFAULT_FACTORS);
+
+	writel(CCM_PSI_AHB1_AHB2_DEFAULT, &ccm->psi_ahb1_ahb2_cfg);
+	writel(CCM_AHB3_DEFAULT, &ccm->ahb3_cfg);
+	writel(CCM_APB1_DEFAULT, &ccm->apb1_cfg);
+
+	/*
+	 * The mux and factor are set, but the clock will be enabled in
+	 * DRAM initialization code.
+	 */
+	writel(MBUS_CLK_SRC_PLL6X2 | MBUS_CLK_M(3), &ccm->mbus_cfg);
+}
+#endif
+
+void clock_init_uart(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* uart clock source is apb2 */
+	writel(APB2_CLK_SRC_OSC24M|
+	       APB2_CLK_RATE_N_1|
+	       APB2_CLK_RATE_M(1),
+	       &ccm->apb2_cfg);
+
+	/* open the clock for uart */
+	setbits_le32(&ccm->uart_gate_reset,
+		     1 << (CONFIG_CONS_INDEX - 1));
+
+	/* deassert uart reset */
+	setbits_le32(&ccm->uart_gate_reset,
+		     1 << (RESET_SHIFT + CONFIG_CONS_INDEX - 1));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	u32 val;
+
+	/* Do not support clocks < 288MHz as they need factor P */
+	if (clk < 288000000) clk = 288000000;
+
+	/* Switch to 24MHz clock while changing PLL1 */
+	val = readl(&ccm->cpu_axi_cfg);
+	val &= ~CCM_CPU_AXI_MUX_MASK;
+	val |= CCM_CPU_AXI_MUX_OSC24M;
+	writel(val, &ccm->cpu_axi_cfg);
+
+	/* clk = 24*n/p, p is ignored if clock is >288MHz */
+	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2 |
+#ifdef CONFIG_MACH_SUN50I_H616
+	       CCM_PLL1_OUT_EN |
+#endif
+	       CCM_PLL1_CTRL_N(clk / 24000000), &ccm->pll1_cfg);
+	while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_LOCK)) {}
+
+	/* Switch CPU to PLL1 */
+	val = readl(&ccm->cpu_axi_cfg);
+	val &= ~CCM_CPU_AXI_MUX_MASK;
+	val |= CCM_CPU_AXI_MUX_PLL_CPUX;
+	writel(val, &ccm->cpu_axi_cfg);
+}
+#endif
+
+unsigned int clock_get_pll6(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	int m = IS_ENABLED(CONFIG_MACH_SUN50I_H6) ? 4 : 2;
+
+	uint32_t rval = readl(&ccm->pll6_cfg);
+	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+	int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
+			CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
+	int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
+			CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
+	/* The register defines PLL6-2X or PLL6-4X, not plain PLL6 */
+	return 24000000 / m * n / div1 / div2;
+}
+
+int clock_twi_onoff(int port, int state)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_prcm_reg *const prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+	u32 value, *ptr;
+	int shift;
+
+	value = BIT(GATE_SHIFT) | BIT (RESET_SHIFT);
+
+	if (port == 5) {
+		shift = 0;
+		ptr = &prcm->twi_gate_reset;
+	} else {
+		shift = port;
+		ptr = &ccm->twi_gate_reset;
+	}
+
+	/* set the apb clock gate and reset for twi */
+	if (state)
+		setbits_le32(ptr, value << shift);
+	else
+		clrbits_le32(ptr, value << shift);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/clock_sun6i.c b/roms/u-boot/arch/arm/mach-sunxi/clock_sun6i.c
new file mode 100644
index 000000000..8e84062bd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/clock_sun6i.c
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sun6i specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I)
+	struct sunxi_prcm_reg * const prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+	/* Set PLL ldo voltage without this PLL6 does not work properly */
+	clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
+			PRCM_PLL_CTRL_LDO_KEY);
+	clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
+		PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
+		PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
+	clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
+#endif
+
+#if defined(CONFIG_MACH_SUN8I_R40) || defined(CONFIG_MACH_SUN50I)
+	/* Set PLL lock enable bits and switch to old lock mode */
+	writel(GENMASK(12, 0), &ccm->pll_lock_ctrl);
+#endif
+
+	clock_set_pll1(408000000);
+
+	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+	while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_CTRL_LOCK))
+		;
+
+	writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+
+	writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg);
+	if (IS_ENABLED(CONFIG_MACH_SUN6I))
+		writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg);
+
+#if defined(CONFIG_MACH_SUN8I_R40) && defined(CONFIG_SUNXI_AHCI)
+	setbits_le32(&ccm->sata_pll_cfg, CCM_SATA_PLL_DEFAULT);
+	setbits_le32(&ccm->ahb_reset0_cfg, 0x1 << AHB_GATE_OFFSET_SATA);
+	setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_SATA);
+	setbits_le32(&ccm->sata_clk_cfg, CCM_SATA_CTRL_ENABLE);
+#endif
+}
+#endif
+
+void clock_init_sec(void)
+{
+#ifdef CONFIG_MACH_SUNXI_H3_H5
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_prcm_reg * const prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+	setbits_le32(&ccm->ccu_sec_switch,
+		     CCM_SEC_SWITCH_MBUS_NONSEC |
+		     CCM_SEC_SWITCH_BUS_NONSEC |
+		     CCM_SEC_SWITCH_PLL_NONSEC);
+	setbits_le32(&prcm->prcm_sec_switch,
+		     PRCM_SEC_SWITCH_APB0_CLK_NONSEC |
+		     PRCM_SEC_SWITCH_PLL_CFG_NONSEC |
+		     PRCM_SEC_SWITCH_PWR_GATE_NONSEC);
+#endif
+}
+
+void clock_init_uart(void)
+{
+#if CONFIG_CONS_INDEX < 5
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* uart clock source is apb2 */
+	writel(APB2_CLK_SRC_OSC24M|
+	       APB2_CLK_RATE_N_1|
+	       APB2_CLK_RATE_M(1),
+	       &ccm->apb2_div);
+
+	/* open the clock for uart */
+	setbits_le32(&ccm->apb2_gate,
+		     CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
+				       CONFIG_CONS_INDEX - 1));
+
+	/* deassert uart reset */
+	setbits_le32(&ccm->apb2_reset_cfg,
+		     1 << (APB2_RESET_UART_SHIFT +
+			   CONFIG_CONS_INDEX - 1));
+#else
+	/* enable R_PIO and R_UART clocks, and de-assert resets */
+	prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
+#endif
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int p = 0;
+	int k = 1;
+	int m = 1;
+
+	if (clk > 1152000000) {
+		k = 2;
+	} else if (clk > 768000000) {
+		k = 4;
+		m = 2;
+	}
+
+	/* Switch to 24MHz clock while changing PLL1 */
+	writel(AXI_DIV_3 << AXI_DIV_SHIFT |
+	       ATB_DIV_2 << ATB_DIV_SHIFT |
+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_axi_cfg);
+
+	/*
+	 * sun6i: PLL1 rate = ((24000000 * n * k) >> 0) / m   (p is ignored)
+	 * sun8i: PLL1 rate = ((24000000 * n * k) >> p) / m
+	 */
+	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
+	       CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) |
+	       CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg);
+	sdelay(200);
+
+	/* Switch CPU to PLL1 */
+	writel(AXI_DIV_3 << AXI_DIV_SHIFT |
+	       ATB_DIV_2 << ATB_DIV_SHIFT |
+	       CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_axi_cfg);
+}
+#endif
+
+void clock_set_pll3(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+#ifdef CONFIG_SUNXI_DE2
+	const int m = 4; /* 6 MHz steps to allow higher frequency for DE2 */
+#else
+	const int m = 8; /* 3 MHz steps just like sun4i, sun5i and sun7i */
+#endif
+
+	if (clk == 0) {
+		clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
+		return;
+	}
+
+	/* PLL3 rate = 24000000 * n / m */
+	writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+	       CCM_PLL3_CTRL_N(clk / (24000000 / m)) | CCM_PLL3_CTRL_M(m),
+	       &ccm->pll3_cfg);
+}
+
+#ifdef CONFIG_SUNXI_DE2
+void clock_set_pll3_factors(int m, int n)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* PLL3 rate = 24000000 * n / m */
+	writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+	       CCM_PLL3_CTRL_N(n) | CCM_PLL3_CTRL_M(m),
+	       &ccm->pll3_cfg);
+
+	while (!(readl(&ccm->pll3_cfg) & CCM_PLL3_CTRL_LOCK))
+		;
+}
+#endif
+
+void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int max_n = 32;
+	int k = 1, m = 2;
+
+#ifdef CONFIG_MACH_SUNXI_H3_H5
+	clrsetbits_le32(&ccm->pll5_tuning_cfg, CCM_PLL5_TUN_LOCK_TIME_MASK |
+			CCM_PLL5_TUN_INIT_FREQ_MASK,
+			CCM_PLL5_TUN_LOCK_TIME(2) | CCM_PLL5_TUN_INIT_FREQ(16));
+#endif
+
+	if (sigma_delta_enable)
+		writel(CCM_PLL5_PATTERN, &ccm->pll5_pattern_cfg);
+
+	/* PLL5 rate = 24000000 * n * k / m */
+	if (clk > 24000000 * k * max_n / m) {
+		m = 1;
+		if (clk > 24000000 * k * max_n / m)
+			k = 2;
+	}
+	writel(CCM_PLL5_CTRL_EN |
+	       (sigma_delta_enable ? CCM_PLL5_CTRL_SIGMA_DELTA_EN : 0) |
+	       CCM_PLL5_CTRL_UPD |
+	       CCM_PLL5_CTRL_N(clk / (24000000 * k / m)) |
+	       CCM_PLL5_CTRL_K(k) | CCM_PLL5_CTRL_M(m), &ccm->pll5_cfg);
+
+	udelay(5500);
+}
+
+#ifdef CONFIG_MACH_SUN6I
+void clock_set_mipi_pll(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	unsigned int k, m, n, value, diff;
+	unsigned best_k = 0, best_m = 0, best_n = 0, best_diff = 0xffffffff;
+	unsigned int src = clock_get_pll3();
+
+	/* All calculations are in KHz to avoid overflows */
+	clk /= 1000;
+	src /= 1000;
+
+	/* Pick the closest lower clock */
+	for (k = 1; k <= 4; k++) {
+		for (m = 1; m <= 16; m++) {
+			for (n = 1; n <= 16; n++) {
+				value = src * n * k / m;
+				if (value > clk)
+					continue;
+
+				diff = clk - value;
+				if (diff < best_diff) {
+					best_diff = diff;
+					best_k = k;
+					best_m = m;
+					best_n = n;
+				}
+				if (diff == 0)
+					goto done;
+			}
+		}
+	}
+
+done:
+	writel(CCM_MIPI_PLL_CTRL_EN | CCM_MIPI_PLL_CTRL_LDO_EN |
+	       CCM_MIPI_PLL_CTRL_N(best_n) | CCM_MIPI_PLL_CTRL_K(best_k) |
+	       CCM_MIPI_PLL_CTRL_M(best_m), &ccm->mipi_pll_cfg);
+}
+#endif
+
+#ifdef CONFIG_SUNXI_DE2
+void clock_set_pll10(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int m = 2; /* 12 MHz steps */
+
+	if (clk == 0) {
+		clrbits_le32(&ccm->pll10_cfg, CCM_PLL10_CTRL_EN);
+		return;
+	}
+
+	/* PLL10 rate = 24000000 * n / m */
+	writel(CCM_PLL10_CTRL_EN | CCM_PLL10_CTRL_INTEGER_MODE |
+	       CCM_PLL10_CTRL_N(clk / (24000000 / m)) | CCM_PLL10_CTRL_M(m),
+	       &ccm->pll10_cfg);
+
+	while (!(readl(&ccm->pll10_cfg) & CCM_PLL10_CTRL_LOCK))
+		;
+}
+#endif
+
+#if defined(CONFIG_MACH_SUN8I_A33) || \
+    defined(CONFIG_MACH_SUN8I_R40) || \
+    defined(CONFIG_MACH_SUN50I)
+void clock_set_pll11(unsigned int clk, bool sigma_delta_enable)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	if (sigma_delta_enable)
+		writel(CCM_PLL11_PATTERN, &ccm->pll11_pattern_cfg0);
+
+	writel(CCM_PLL11_CTRL_EN | CCM_PLL11_CTRL_UPD |
+	       (sigma_delta_enable ? CCM_PLL11_CTRL_SIGMA_DELTA_EN : 0) |
+	       CCM_PLL11_CTRL_N(clk / 24000000), &ccm->pll11_cfg);
+
+	while (readl(&ccm->pll11_cfg) & CCM_PLL11_CTRL_UPD)
+		;
+}
+#endif
+
+unsigned int clock_get_pll3(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	uint32_t rval = readl(&ccm->pll3_cfg);
+	int n = ((rval & CCM_PLL3_CTRL_N_MASK) >> CCM_PLL3_CTRL_N_SHIFT) + 1;
+	int m = ((rval & CCM_PLL3_CTRL_M_MASK) >> CCM_PLL3_CTRL_M_SHIFT) + 1;
+
+	/* Multiply by 1000 after dividing by m to avoid integer overflows */
+	return (24000 * n / m) * 1000;
+}
+
+unsigned int clock_get_pll6(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	uint32_t rval = readl(&ccm->pll6_cfg);
+	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
+	int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
+	return 24000000 * n * k / 2;
+}
+
+unsigned int clock_get_mipi_pll(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	uint32_t rval = readl(&ccm->mipi_pll_cfg);
+	unsigned int n = ((rval & CCM_MIPI_PLL_CTRL_N_MASK) >> CCM_MIPI_PLL_CTRL_N_SHIFT) + 1;
+	unsigned int k = ((rval & CCM_MIPI_PLL_CTRL_K_MASK) >> CCM_MIPI_PLL_CTRL_K_SHIFT) + 1;
+	unsigned int m = ((rval & CCM_MIPI_PLL_CTRL_M_MASK) >> CCM_MIPI_PLL_CTRL_M_SHIFT) + 1;
+	unsigned int src = clock_get_pll3();
+
+	/* Multiply by 1000 after dividing by m to avoid integer overflows */
+	return ((src / 1000) * n * k / m) * 1000;
+}
+
+void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
+{
+	int pll = clock_get_pll6() * 2;
+	int div = 1;
+
+	while ((pll / div) > hz)
+		div++;
+
+	writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_PLL6_2X | CCM_DE_CTRL_M(div),
+	       clk_cfg);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/clock_sun8i_a83t.c b/roms/u-boot/arch/arm/mach-sunxi/clock_sun8i_a83t.c
new file mode 100644
index 000000000..31e428152
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/clock_sun8i_a83t.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * A83 specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/delay.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	clock_set_pll1(408000000);
+	/* enable pll_hsic, default is 480M */
+	writel(PLL8_CFG_DEFAULT, &ccm->pll8_cfg);
+	writel(readl(&ccm->pll8_cfg) | (0x1 << 31), &ccm->pll8_cfg);
+	while (!(readl(&ccm->pll_stable_status) & (1 << 8))) {}
+
+	/* switch to default 24MHz before changing to hsic */
+	writel(0x0, &ccm->cci400_cfg);
+	sdelay(50);
+	writel(CCM_CCI400_CLK_SEL_HSIC, &ccm->cci400_cfg);
+	sdelay(100);
+
+	/* switch before changing pll6 */
+	clrsetbits_le32(&ccm->ahb1_apb1_div, AHB1_CLK_SRC_MASK,
+			AHB1_CLK_SRC_OSC24M);
+	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+	while (!(readl(&ccm->pll_stable_status) & (1 << 6))) {}
+
+	writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+	writel(CCM_MBUS_RESET_RESET, &ccm->mbus_reset);
+	writel(MBUS_CLK_DEFAULT, &ccm->mbus_clk_cfg);
+
+	/* timestamp */
+	writel(1, 0x01720000);
+}
+#endif
+
+void clock_init_uart(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* uart clock source is apb2 */
+	writel(APB2_CLK_SRC_OSC24M|
+	       APB2_CLK_RATE_N_1|
+	       APB2_CLK_RATE_M(1),
+	       &ccm->apb2_div);
+
+	/* open the clock for uart */
+	setbits_le32(&ccm->apb2_gate,
+		     CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
+				       CONFIG_CONS_INDEX - 1));
+
+	/* deassert uart reset */
+	setbits_le32(&ccm->apb2_reset_cfg,
+		     1 << (APB2_RESET_UART_SHIFT +
+			   CONFIG_CONS_INDEX - 1));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int p = 0;
+
+	/* Switch to 24MHz clock while changing PLL1 */
+	writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
+		AXI_DIV_2 << AXI1_DIV_SHIFT |
+		CPU_CLK_SRC_OSC24M << C0_CPUX_CLK_SRC_SHIFT |
+		CPU_CLK_SRC_OSC24M << C1_CPUX_CLK_SRC_SHIFT,
+	       &ccm->cpu_axi_cfg);
+
+	/* clk = 24*n/p, p is ignored if clock is >288MHz */
+	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
+		CCM_PLL1_CTRL_N(clk / 24000000),
+		&ccm->pll1_c0_cfg);
+	while (!(readl(&ccm->pll_stable_status) & 0x01)) {}
+
+	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
+		CCM_PLL1_CTRL_N(clk / (24000000)),
+		&ccm->pll1_c1_cfg);
+	while (!(readl(&ccm->pll_stable_status) & 0x02)) {}
+
+	/* Switch CPU to PLL1 */
+	writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
+		AXI_DIV_2 << AXI1_DIV_SHIFT |
+		CPU_CLK_SRC_PLL1 << C0_CPUX_CLK_SRC_SHIFT |
+		CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT,
+	       &ccm->cpu_axi_cfg);
+}
+#endif
+
+void clock_set_pll5(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	unsigned int div1 = 0, div2 = 0;
+
+	/* A83T PLL5 DDR rate = 24000000 * (n+1)/(div1+1)/(div2+1) */
+	writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD |
+			CCM_PLL5_CTRL_N(clk / (24000000)) |
+			div2 << CCM_PLL5_DIV2_SHIFT |
+			div1 << CCM_PLL5_DIV1_SHIFT, &ccm->pll5_cfg);
+
+	udelay(5500);
+}
+
+
+unsigned int clock_get_pll6(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	uint32_t rval = readl(&ccm->pll6_cfg);
+	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+	int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
+			CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
+	int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
+			CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
+	return 24000000 * n / div1 / div2;
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/clock_sun9i.c b/roms/u-boot/arch/arm/mach-sunxi/clock_sun9i.c
new file mode 100644
index 000000000..8ba4802f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/clock_sun9i.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * sun9i specific clock code
+ *
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
+ *                    Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+
+#ifdef CONFIG_SPL_BUILD
+
+void clock_init_safe(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* Set up PLL12 (peripheral 1) */
+	clock_set_pll12(1200000000);
+
+	/* Set up PLL1 (cluster 0) and PLL2 (cluster 1) */
+	clock_set_pll1(408000000);
+	clock_set_pll2(408000000);
+
+	/* Set up PLL4 (peripheral 0) */
+	clock_set_pll4(960000000);
+
+	/* Set up dividers for AXI0 and APB0 on cluster 0: PLL1 / 2 = 204MHz */
+	writel(C0_CFG_AXI0_CLK_DIV_RATIO(2) |
+	       C0_CFG_APB0_CLK_DIV_RATIO(2), &ccm->c0_cfg);
+
+	/* AHB0: 120 MHz (PLL_PERIPH0 / 8) */
+	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
+	       &ccm->ahb0_cfg);
+	/* AHB1: 240 MHz (PLL_PERIPH0 / 4) */
+	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(4),
+	       &ccm->ahb1_cfg);
+	/* AHB2: 120 MHz (PLL_PERIPH0 / 8) */
+	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
+	       &ccm->ahb2_cfg);
+	/* APB0: 120 MHz (PLL_PERIPH0 / 8) */
+	writel(APB0_SRC_PLL_PERIPH0 | APB0_CLK_DIV_RATIO(8),
+	       &ccm->apb0_cfg);
+
+	/* GTBUS: 400MHz (PERIPH0 div 3) */
+	writel(GTBUS_SRC_PLL_PERIPH1 | GTBUS_CLK_DIV_RATIO(3),
+	       &ccm->gtbus_cfg);
+	/* CCI400: 480MHz (PERIPH1 div 2) */
+	writel(CCI400_SRC_PLL_PERIPH0 | CCI400_CLK_DIV_RATIO(2),
+	       &ccm->cci400_cfg);
+
+	/* Deassert DMA reset and open clock gating for DMA */
+	setbits_le32(&ccm->ahb_reset1_cfg, (1 << 24));
+	setbits_le32(&ccm->apb1_gate, (1 << 24));
+
+	/* set enable-bit in TSTAMP_CTRL_REG */
+	writel(1, 0x01720000);
+}
+#endif
+
+void clock_init_uart(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* open the clock for uart */
+	setbits_le32(&ccm->apb1_gate,
+		     CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT +
+				       CONFIG_CONS_INDEX - 1));
+	/* deassert uart reset */
+	setbits_le32(&ccm->apb1_reset_cfg,
+		     1 << (APB1_RESET_UART_SHIFT +
+			   CONFIG_CONS_INDEX - 1));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int p = 0;
+
+	/* Switch cluster 0 to 24MHz clock while changing PLL1 */
+	clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
+			C0_CPUX_CLK_SRC_OSC24M);
+
+	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
+	       CCM_PLL1_CLOCK_TIME_2 |
+	       CCM_PLL1_CTRL_N(clk / 24000000),
+	       &ccm->pll1_c0_cfg);
+	/*
+	 * Don't bother with the stable-time registers, as it doesn't
+	 * wait until the PLL is stable.  Note, that even Allwinner
+	 * just uses a delay loop (or rather the AVS timer) for this
+	 * instead of the PLL_STABLE_STATUS register.
+	 */
+	sdelay(2000);
+
+	/* Switch cluster 0 back to PLL1 */
+	clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
+			C0_CPUX_CLK_SRC_PLL1);
+}
+
+void clock_set_pll2(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int p = 0;
+
+	/* Switch cluster 1 to 24MHz clock while changing PLL2 */
+	clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
+			C1_CPUX_CLK_SRC_OSC24M);
+
+	writel(CCM_PLL2_CTRL_EN | CCM_PLL2_CTRL_P(p) |
+	       CCM_PLL2_CLOCK_TIME_2 | CCM_PLL2_CTRL_N(clk / 24000000),
+	       &ccm->pll2_c1_cfg);
+
+	sdelay(2000);
+
+	/* Switch cluster 1 back to PLL2 */
+	clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
+			C1_CPUX_CLK_SRC_PLL2);
+}
+
+void clock_set_pll6(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int p = 0;
+
+	writel(CCM_PLL6_CTRL_EN | CCM_PLL6_CFG_UPDATE | CCM_PLL6_CTRL_P(p)
+	       | CCM_PLL6_CTRL_N(clk / 24000000),
+	       &ccm->pll6_ddr_cfg);
+	do { } while (!(readl(&ccm->pll_stable_status) & PLL_DDR_STATUS));
+
+	sdelay(2000);
+}
+
+void clock_set_pll12(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	if (readl(&ccm->pll12_periph1_cfg) & CCM_PLL12_CTRL_EN)
+		return;
+
+	writel(CCM_PLL12_CTRL_EN | CCM_PLL12_CTRL_N(clk / 24000000),
+	       &ccm->pll12_periph1_cfg);
+
+	sdelay(2000);
+}
+
+
+void clock_set_pll4(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	writel(CCM_PLL4_CTRL_EN | CCM_PLL4_CTRL_N(clk / 24000000),
+	       &ccm->pll4_periph0_cfg);
+
+	sdelay(2000);
+}
+#endif
+
+int clock_twi_onoff(int port, int state)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	if (port > 4)
+		return -1;
+
+	/* set the apb reset and clock gate for twi */
+	if (state) {
+		setbits_le32(&ccm->apb1_gate,
+			     CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+		setbits_le32(&ccm->apb1_reset_cfg,
+			     1 << (APB1_RESET_TWI_SHIFT + port));
+	} else {
+		clrbits_le32(&ccm->apb1_reset_cfg,
+			     1 << (APB1_RESET_TWI_SHIFT + port));
+		clrbits_le32(&ccm->apb1_gate,
+			     CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+	}
+
+	return 0;
+}
+
+unsigned int clock_get_pll4_periph0(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	uint32_t rval = readl(&ccm->pll4_periph0_cfg);
+	int n = ((rval & CCM_PLL4_CTRL_N_MASK) >> CCM_PLL4_CTRL_N_SHIFT);
+	int p = ((rval & CCM_PLL4_CTRL_P_MASK) >> CCM_PLL4_CTRL_P_SHIFT);
+	int m = ((rval & CCM_PLL4_CTRL_M_MASK) >> CCM_PLL4_CTRL_M_SHIFT) + 1;
+	const int k = 1;
+
+	return ((24000000 * n * k) >> p) / m;
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/cpu_info.c b/roms/u-boot/arch/arm/mach-sunxi/cpu_info.c
new file mode 100644
index 000000000..ba33ef243
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/cpu_info.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <axp_pmic.h>
+#include <errno.h>
+
+#ifdef CONFIG_MACH_SUN6I
+int sunxi_get_ss_bonding_id(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	static int bonding_id = -1;
+
+	if (bonding_id != -1)
+		return bonding_id;
+
+	/* Enable Security System */
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_SS);
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_SS);
+
+	bonding_id = readl(SUNXI_SS_BASE);
+	bonding_id = (bonding_id >> 16) & 0x7;
+
+	/* Disable Security System again */
+	clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_SS);
+	clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_SS);
+
+	return bonding_id;
+}
+#endif
+
+#ifdef CONFIG_MACH_SUN8I
+uint sunxi_get_sram_id(void)
+{
+	uint id;
+
+	/* Unlock sram info reg, read it, relock */
+	setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+	id = readl(SUNXI_SRAMC_BASE + 0x24) >> 16;
+	clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+
+	return id;
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+#ifdef CONFIG_MACH_SUN4I
+	puts("CPU:   Allwinner A10 (SUN4I)\n");
+#elif defined CONFIG_MACH_SUN5I
+	u32 val = readl(SUNXI_SID_BASE + 0x08);
+	switch ((val >> 12) & 0xf) {
+	case 0: puts("CPU:   Allwinner A12 (SUN5I)\n"); break;
+	case 3: puts("CPU:   Allwinner A13 (SUN5I)\n"); break;
+	case 7: puts("CPU:   Allwinner A10s (SUN5I)\n"); break;
+	default: puts("CPU:   Allwinner A1X (SUN5I)\n");
+	}
+#elif defined CONFIG_MACH_SUN6I
+	switch (sunxi_get_ss_bonding_id()) {
+	case SUNXI_SS_BOND_ID_A31:
+		puts("CPU:   Allwinner A31 (SUN6I)\n");
+		break;
+	case SUNXI_SS_BOND_ID_A31S:
+		puts("CPU:   Allwinner A31s (SUN6I)\n");
+		break;
+	default:
+		printf("CPU:   Allwinner A31? (SUN6I, id: %d)\n",
+		       sunxi_get_ss_bonding_id());
+	}
+#elif defined CONFIG_MACH_SUN7I
+	puts("CPU:   Allwinner A20 (SUN7I)\n");
+#elif defined CONFIG_MACH_SUN8I_A23
+	printf("CPU:   Allwinner A23 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_A33
+	printf("CPU:   Allwinner A33 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_A83T
+	printf("CPU:   Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_H3
+	printf("CPU:   Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_R40
+	printf("CPU:   Allwinner R40 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_V3S
+	printf("CPU:   Allwinner V3s (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN9I
+	puts("CPU:   Allwinner A80 (SUN9I)\n");
+#elif defined CONFIG_MACH_SUN50I
+	puts("CPU:   Allwinner A64 (SUN50I)\n");
+#elif defined CONFIG_MACH_SUN50I_H5
+	puts("CPU:   Allwinner H5 (SUN50I)\n");
+#elif defined CONFIG_MACH_SUN50I_H6
+	puts("CPU:   Allwinner H6 (SUN50I)\n");
+#elif defined CONFIG_MACH_SUN50I_H616
+	puts("CPU:   Allwinner H616 (SUN50I)\n");
+#else
+#warning Please update cpu_info.c with correct CPU information
+	puts("CPU:   SUNXI Family\n");
+#endif
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MACH_SUN8I_H3
+
+#define SIDC_PRCTL 0x40
+#define SIDC_RDKEY 0x60
+
+#define SIDC_OP_LOCK 0xAC
+
+uint32_t sun8i_efuse_read(uint32_t offset)
+{
+	uint32_t reg_val;
+
+	reg_val = readl(SUNXI_SIDC_BASE + SIDC_PRCTL);
+	reg_val &= ~(((0x1ff) << 16) | 0x3);
+	reg_val |= (offset << 16);
+	writel(reg_val, SUNXI_SIDC_BASE + SIDC_PRCTL);
+
+	reg_val &= ~(((0xff) << 8) | 0x3);
+	reg_val |= (SIDC_OP_LOCK << 8) | 0x2;
+	writel(reg_val, SUNXI_SIDC_BASE + SIDC_PRCTL);
+
+	while (readl(SUNXI_SIDC_BASE + SIDC_PRCTL) & 0x2);
+
+	reg_val &= ~(((0x1ff) << 16) | ((0xff) << 8) | 0x3);
+	writel(reg_val, SUNXI_SIDC_BASE + SIDC_PRCTL);
+
+	reg_val = readl(SUNXI_SIDC_BASE + SIDC_RDKEY);
+	return reg_val;
+}
+#endif
+
+int sunxi_get_sid(unsigned int *sid)
+{
+#ifdef CONFIG_AXP221_POWER
+	return axp_get_sid(sid);
+#elif defined CONFIG_MACH_SUN8I_H3
+	/*
+	 * H3 SID controller has a bug, which makes the initial value of
+	 * SUNXI_SID_BASE at boot wrong.
+	 * Read the value directly from SID controller, in order to get
+	 * the correct value, and also refresh the wrong value at
+	 * SUNXI_SID_BASE.
+	 */
+	int i;
+
+	for (i = 0; i< 4; i++)
+		sid[i] = sun8i_efuse_read(i * 4);
+
+	return 0;
+#elif defined SUNXI_SID_BASE
+	int i;
+
+	for (i = 0; i< 4; i++)
+		sid[i] = readl((ulong)SUNXI_SID_BASE + 4 * i);
+
+	return 0;
+#else
+	return -ENODEV;
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_helpers.c b/roms/u-boot/arch/arm/mach-sunxi/dram_helpers.c
new file mode 100644
index 000000000..520b597fc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_helpers.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * DRAM init helper functions
+ *
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <common.h>
+#include <time.h>
+#include <asm/barriers.h>
+#include <asm/io.h>
+#include <asm/arch/dram.h>
+
+/*
+ * Wait up to 1s for value to be set in given part of reg.
+ */
+void mctl_await_completion(u32 *reg, u32 mask, u32 val)
+{
+	unsigned long tmo = timer_get_us() + 1000000;
+
+	while ((readl(reg) & mask) != val) {
+		if (timer_get_us() > tmo)
+			panic("Timeout initialising DRAM\n");
+	}
+}
+
+/*
+ * Test if memory at offset offset matches memory at begin of DRAM
+ */
+bool mctl_mem_matches(u32 offset)
+{
+	/* Try to write different values to RAM at two addresses */
+	writel(0, CONFIG_SYS_SDRAM_BASE);
+	writel(0xaa55aa55, (ulong)CONFIG_SYS_SDRAM_BASE + offset);
+	dsb();
+	/* Check if the same value is actually observed when reading back */
+	return readl(CONFIG_SYS_SDRAM_BASE) ==
+	       readl((ulong)CONFIG_SYS_SDRAM_BASE + offset);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sun4i.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sun4i.c
new file mode 100644
index 000000000..76d698214
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sun4i.c
@@ -0,0 +1,738 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sunxi DRAM controller initialization
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
+ * and earlier U-Boot Allwinner A10 SPL work
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+/*
+ * Unfortunately the only documentation we have on the sun7i DRAM
+ * controller is Allwinner boot0 + boot1 code, and that code uses
+ * magic numbers & shifts with no explanations. Hence this code is
+ * rather undocumented and full of magic.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/delay.h>
+
+#define CPU_CFG_CHIP_VER(n) ((n) << 6)
+#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
+#define CPU_CFG_CHIP_REV_A 0x0
+#define CPU_CFG_CHIP_REV_C1 0x1
+#define CPU_CFG_CHIP_REV_C2 0x2
+#define CPU_CFG_CHIP_REV_B 0x3
+
+/*
+ * Wait up to 1s for mask to be clear in given reg.
+ */
+static inline void await_bits_clear(u32 *reg, u32 mask)
+{
+	mctl_await_completion(reg, mask, 0);
+}
+
+/*
+ * Wait up to 1s for mask to be set in given reg.
+ */
+static inline void await_bits_set(u32 *reg, u32 mask)
+{
+	mctl_await_completion(reg, mask, mask);
+}
+
+/*
+ * This performs the external DRAM reset by driving the RESET pin low and
+ * then high again. According to the DDR3 spec, the RESET pin needs to be
+ * kept low for at least 200 us.
+ */
+static void mctl_ddr3_reset(void)
+{
+	struct sunxi_dram_reg *dram =
+			(struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+#ifdef CONFIG_MACH_SUN4I
+	struct sunxi_timer_reg *timer =
+			(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+	u32 reg_val;
+
+	writel(0, &timer->cpu_cfg);
+	reg_val = readl(&timer->cpu_cfg);
+
+	if ((reg_val & CPU_CFG_CHIP_VER_MASK) !=
+	    CPU_CFG_CHIP_VER(CPU_CFG_CHIP_REV_A)) {
+		setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+		udelay(200);
+		clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
+	} else
+#endif
+	{
+		clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
+		udelay(200);
+		setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+	}
+	/* After the RESET pin is de-asserted, the DDR3 spec requires to wait
+	 * for additional 500 us before driving the CKE pin (Clock Enable)
+	 * high. The duration of this delay can be configured in the SDR_IDCR
+	 * (Initialization Delay Configuration Register) and applied
+	 * automatically by the DRAM controller during the DDR3 initialization
+	 * step. But SDR_IDCR has limited range on sun4i/sun5i hardware and
+	 * can't provide sufficient delay at DRAM clock frequencies higher than
+	 * 524 MHz (while Allwinner A13 supports DRAM clock frequency up to
+	 * 533 MHz according to the datasheet). Additionally, there is no
+	 * official documentation for the SDR_IDCR register anywhere, and
+	 * there is always a chance that we are interpreting it wrong.
+	 * Better be safe than sorry, so add an explicit delay here. */
+	udelay(500);
+}
+
+static void mctl_set_drive(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+#ifdef CONFIG_MACH_SUN7I
+	clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
+#else
+	clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
+#endif
+			DRAM_MCR_MODE_EN(0x3) |
+			0xffc);
+}
+
+static void mctl_itm_disable(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+	clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_itm_enable(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+	clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_itm_reset(void)
+{
+	mctl_itm_disable();
+	udelay(1); /* ITM reset needs a bit of delay */
+	mctl_itm_enable();
+	udelay(1);
+}
+
+static void mctl_enable_dll0(u32 phase)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+	clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+			((phase >> 16) & 0x3f) << 6);
+	clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
+	udelay(2);
+
+	clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
+	udelay(22);
+
+	clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
+	udelay(22);
+}
+
+/* Get the number of DDR byte lanes */
+static u32 mctl_get_number_of_lanes(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	if ((readl(&dram->dcr) & DRAM_DCR_BUS_WIDTH_MASK) ==
+				DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
+		return 4;
+	else
+		return 2;
+}
+
+/*
+ * Note: This differs from pm/standby in that it checks the bus width
+ */
+static void mctl_enable_dllx(u32 phase)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	u32 i, number_of_lanes;
+
+	number_of_lanes = mctl_get_number_of_lanes();
+
+	for (i = 1; i <= number_of_lanes; i++) {
+		clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
+				(phase & 0xf) << 14);
+		clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
+				DRAM_DLLCR_DISABLE);
+		phase >>= 4;
+	}
+	udelay(2);
+
+	for (i = 1; i <= number_of_lanes; i++)
+		clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
+			     DRAM_DLLCR_DISABLE);
+	udelay(22);
+
+	for (i = 1; i <= number_of_lanes; i++)
+		clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
+				DRAM_DLLCR_NRESET);
+	udelay(22);
+}
+
+static u32 hpcr_value[32] = {
+#ifdef CONFIG_MACH_SUN5I
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	0x1031, 0x1031, 0x0735, 0x1035,
+	0x1035, 0x0731, 0x1031, 0,
+	0x0301, 0x0301, 0x0301, 0x0301,
+	0x0301, 0x0301, 0x0301, 0
+#endif
+#ifdef CONFIG_MACH_SUN4I
+	0x0301, 0x0301, 0x0301, 0x0301,
+	0x0301, 0x0301, 0, 0,
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	0x1031, 0x1031, 0x0735, 0x5031,
+	0x1035, 0x0731, 0x1031, 0x0735,
+	0x1035, 0x1031, 0x0731, 0x1035,
+	0x1031, 0x0301, 0x0301, 0x0731
+#endif
+#ifdef CONFIG_MACH_SUN7I
+	0x0301, 0x0301, 0x0301, 0x0301,
+	0x0301, 0x0301, 0x0301, 0x0301,
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	0x1031, 0x1031, 0x0735, 0x1035,
+	0x1035, 0x0731, 0x1031, 0x0735,
+	0x1035, 0x1031, 0x0731, 0x1035,
+	0x0001, 0x1031, 0, 0x1031
+	/* last row differs from boot0 source table
+	 * 0x1031, 0x0301, 0x0301, 0x0731
+	 * but boot0 code skips #28 and #30, and sets #29 and #31 to the
+	 * value from #28 entry (0x1031)
+	 */
+#endif
+};
+
+static void mctl_configure_hostport(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	u32 i;
+
+	for (i = 0; i < 32; i++)
+		writel(hpcr_value[i], &dram->hpcr[i]);
+}
+
+static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
+{
+	u32 reg_val;
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	u32 pll5p_clk, pll6x_clk;
+	u32 pll5p_div, pll6x_div;
+	u32 pll5p_rate, pll6x_rate;
+
+	/* setup DRAM PLL */
+	reg_val = readl(&ccm->pll5_cfg);
+	reg_val &= ~CCM_PLL5_CTRL_M_MASK;		/* set M to 0 (x1) */
+	reg_val &= ~CCM_PLL5_CTRL_K_MASK;		/* set K to 0 (x1) */
+	reg_val &= ~CCM_PLL5_CTRL_N_MASK;		/* set N to 0 (x0) */
+	reg_val &= ~CCM_PLL5_CTRL_P_MASK;		/* set P to 0 (x1) */
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+	/* Old kernels are hardcoded to P=1 (divide by 2) */
+	reg_val |= CCM_PLL5_CTRL_P(1);
+#endif
+	if (clk >= 540 && clk < 552) {
+		/* dram = 540MHz */
+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
+	} else if (clk >= 512 && clk < 528) {
+		/* dram = 512MHz */
+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
+	} else if (clk >= 496 && clk < 504) {
+		/* dram = 496MHz */
+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
+	} else if (clk >= 468 && clk < 480) {
+		/* dram = 468MHz */
+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
+	} else if (clk >= 396 && clk < 408) {
+		/* dram = 396MHz */
+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
+	} else 	{
+		/* any other frequency that is a multiple of 24 */
+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
+	}
+	reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN;		/* PLL VCO Gain off */
+	reg_val |= CCM_PLL5_CTRL_EN;			/* PLL On */
+	writel(reg_val, &ccm->pll5_cfg);
+	udelay(5500);
+
+	setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
+
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+	/* reset GPS */
+	clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
+	setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+	udelay(1);
+	clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+#endif
+
+	/* setup MBUS clock */
+	if (!mbus_clk)
+		mbus_clk = 300;
+
+	/* PLL5P and PLL6 are the potential clock sources for MBUS */
+	pll6x_clk = clock_get_pll6() / 1000000;
+#ifdef CONFIG_MACH_SUN7I
+	pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
+#endif
+	pll5p_clk = clock_get_pll5p() / 1000000;
+	pll6x_div = DIV_ROUND_UP(pll6x_clk, mbus_clk);
+	pll5p_div = DIV_ROUND_UP(pll5p_clk, mbus_clk);
+	pll6x_rate = pll6x_clk / pll6x_div;
+	pll5p_rate = pll5p_clk / pll5p_div;
+
+	if (pll6x_div <= 16 && pll6x_rate > pll5p_rate) {
+		/* use PLL6 as the MBUS clock source */
+		reg_val = CCM_MBUS_CTRL_GATE |
+			  CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
+			  CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
+			  CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll6x_div));
+	} else if (pll5p_div <= 16) {
+		/* use PLL5P as the MBUS clock source */
+		reg_val = CCM_MBUS_CTRL_GATE |
+			  CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
+			  CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
+			  CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll5p_div));
+	} else {
+		panic("Bad mbus_clk\n");
+	}
+	writel(reg_val, &ccm->mbus_clk_cfg);
+
+	/*
+	 * open DRAMC AHB & DLL register clock
+	 * close it first
+	 */
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+	clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+#else
+	clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
+#endif
+	udelay(22);
+
+	/* then open it */
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+	setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+#else
+	setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
+#endif
+	udelay(22);
+}
+
+/*
+ * The data from rslrX and rdgrX registers (X=rank) is stored
+ * in a single 32-bit value using the following format:
+ *   bits [31:26] - DQS gating system latency for byte lane 3
+ *   bits [25:24] - DQS gating phase select for byte lane 3
+ *   bits [23:18] - DQS gating system latency for byte lane 2
+ *   bits [17:16] - DQS gating phase select for byte lane 2
+ *   bits [15:10] - DQS gating system latency for byte lane 1
+ *   bits [ 9:8 ] - DQS gating phase select for byte lane 1
+ *   bits [ 7:2 ] - DQS gating system latency for byte lane 0
+ *   bits [ 1:0 ] - DQS gating phase select for byte lane 0
+ */
+static void mctl_set_dqs_gating_delay(int rank, u32 dqs_gating_delay)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	u32 lane, number_of_lanes = mctl_get_number_of_lanes();
+	/* rank0 gating system latency (3 bits per lane: cycles) */
+	u32 slr = readl(rank == 0 ? &dram->rslr0 : &dram->rslr1);
+	/* rank0 gating phase select (2 bits per lane: 90, 180, 270, 360) */
+	u32 dgr = readl(rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
+	for (lane = 0; lane < number_of_lanes; lane++) {
+		u32 tmp = dqs_gating_delay >> (lane * 8);
+		slr &= ~(7 << (lane * 3));
+		slr |= ((tmp >> 2) & 7) << (lane * 3);
+		dgr &= ~(3 << (lane * 2));
+		dgr |= (tmp & 3) << (lane * 2);
+	}
+	writel(slr, rank == 0 ? &dram->rslr0 : &dram->rslr1);
+	writel(dgr, rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
+}
+
+static int dramc_scan_readpipe(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	u32 reg_val;
+
+	/* data training trigger */
+	clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
+	setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+	/* check whether data training process has completed */
+	await_bits_clear(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+	/* check data training result */
+	reg_val = readl(&dram->csr);
+	if (reg_val & DRAM_CSR_FAILED)
+		return -1;
+
+	return 0;
+}
+
+static void dramc_clock_output_en(u32 on)
+{
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+	if (on)
+		setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+	else
+		clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+#endif
+#ifdef CONFIG_MACH_SUN4I
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	if (on)
+		setbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT);
+	else
+		clrbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT);
+#endif
+}
+
+/* tRFC in nanoseconds for different densities (from the DDR3 spec) */
+static const u16 tRFC_DDR3_table[6] = {
+	/* 256Mb    512Mb    1Gb      2Gb      4Gb      8Gb */
+	   90,      90,      110,     160,     300,     350
+};
+
+static void dramc_set_autorefresh_cycle(u32 clk, u32 density)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	u32 tRFC, tREFI;
+
+	tRFC = (tRFC_DDR3_table[density] * clk + 999) / 1000;
+	tREFI = (7987 * clk) >> 10;	/* <= 7.8us */
+
+	writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
+}
+
+/* Calculate the value for A11, A10, A9 bits in MR0 (write recovery) */
+static u32 ddr3_write_recovery(u32 clk)
+{
+	u32 twr_ns = 15; /* DDR3 spec says that it is 15ns for all speed bins */
+	u32 twr_ck = (twr_ns * clk + 999) / 1000;
+	if (twr_ck < 5)
+		return 1;
+	else if (twr_ck <= 8)
+		return twr_ck - 4;
+	else if (twr_ck <= 10)
+		return 5;
+	else
+		return 6;
+}
+
+/*
+ * If the dram->ppwrsctl (SDR_DPCR) register has the lowest bit set to 1, this
+ * means that DRAM is currently in self-refresh mode and retaining the old
+ * data. Since we have no idea what to do in this situation yet, just set this
+ * register to 0 and initialize DRAM in the same way as on any normal reboot
+ * (discarding whatever was stored there).
+ *
+ * Note: on sun7i hardware, the highest 16 bits need to be set to 0x1651 magic
+ * value for this write operation to have any effect. On sun5i hadware this
+ * magic value is not necessary. And on sun4i hardware the writes to this
+ * register seem to have no effect at all.
+ */
+static void mctl_disable_power_save(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	writel(0x16510000, &dram->ppwrsctl);
+}
+
+/*
+ * After the DRAM is powered up or reset, the DDR3 spec requires to wait at
+ * least 500 us before driving the CKE pin (Clock Enable) high. The dram->idct
+ * (SDR_IDCR) register appears to configure this delay, which gets applied
+ * right at the time when the DRAM initialization is activated in the
+ * 'mctl_ddr3_initialize' function.
+ */
+static void mctl_set_cke_delay(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+	/* The CKE delay is represented in DRAM clock cycles, multiplied by N
+	 * (where N=2 for sun4i/sun5i and N=3 for sun7i). Here it is set to
+	 * the maximum possible value 0x1ffff, just like in the Allwinner's
+	 * boot0 bootloader. The resulting delay value is somewhere between
+	 * ~0.4 ms (sun5i with 648 MHz DRAM clock speed) and ~1.1 ms (sun7i
+	 * with 360 MHz DRAM clock speed). */
+	setbits_le32(&dram->idcr, 0x1ffff);
+}
+
+/*
+ * This triggers the DRAM initialization. It performs sending the mode registers
+ * to the DRAM among other things. Very likely the ZQCL command is also getting
+ * executed (to do the initial impedance calibration on the DRAM side of the
+ * wire). The memory controller and the PHY must be already configured before
+ * calling this function.
+ */
+static void mctl_ddr3_initialize(void)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	setbits_le32(&dram->ccr, DRAM_CCR_INIT);
+	await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
+}
+
+/*
+ * Perform impedance calibration on the DRAM controller side of the wire.
+ */
+static void mctl_set_impedance(u32 zq, bool odt_en)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	u32 reg_val;
+	u32 zprog = zq & 0xFF, zdata = (zq >> 8) & 0xFFFFF;
+
+#ifndef CONFIG_MACH_SUN7I
+	/* Appears that some kind of automatically initiated default
+	 * ZQ calibration is already in progress at this point on sun4i/sun5i
+	 * hardware, but not on sun7i. So it is reasonable to wait for its
+	 * completion before doing anything else. */
+	await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
+#endif
+
+	/* ZQ calibration is not really useful unless ODT is enabled */
+	if (!odt_en)
+		return;
+
+#ifdef CONFIG_MACH_SUN7I
+	/* Enabling ODT in SDR_IOCR on sun7i hardware results in a deadlock
+	 * unless bit 24 is set in SDR_ZQCR1. Not much is known about the
+	 * SDR_ZQCR1 register, but there are hints indicating that it might
+	 * be related to periodic impedance re-calibration. This particular
+	 * magic value is borrowed from the Allwinner boot0 bootloader, and
+	 * using it helps to avoid troubles */
+	writel((1 << 24) | (1 << 1), &dram->zqcr1);
+#endif
+
+	/* Needed at least for sun5i, because it does not self clear there */
+	clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
+
+	if (zdata) {
+		/* Set the user supplied impedance data */
+		reg_val = DRAM_ZQCR0_ZDEN | zdata;
+		writel(reg_val, &dram->zqcr0);
+		/* no need to wait, this takes effect immediately */
+	} else {
+		/* Do the calibration using the external resistor */
+		reg_val = DRAM_ZQCR0_ZCAL | DRAM_ZQCR0_IMP_DIV(zprog);
+		writel(reg_val, &dram->zqcr0);
+		/* Wait for the new impedance configuration to settle */
+		await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
+	}
+
+	/* Needed at least for sun5i, because it does not self clear there */
+	clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
+
+	/* Set I/O configure register */
+	writel(DRAM_IOCR_ODT_EN, &dram->iocr);
+}
+
+static unsigned long dramc_init_helper(struct dram_para *para)
+{
+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+	u32 reg_val;
+	u32 density;
+	int ret_val;
+
+	/*
+	 * only single rank DDR3 is supported by this code even though the
+	 * hardware can theoretically support DDR2 and up to two ranks
+	 */
+	if (para->type != DRAM_MEMORY_TYPE_DDR3 || para->rank_num != 1)
+		return 0;
+
+	/* setup DRAM relative clock */
+	mctl_setup_dram_clock(para->clock, para->mbus_clock);
+
+	/* Disable any pad power save control */
+	mctl_disable_power_save();
+
+	mctl_set_drive();
+
+	/* dram clock off */
+	dramc_clock_output_en(0);
+
+#ifdef CONFIG_MACH_SUN4I
+	/* select dram controller 1 */
+	writel(DRAM_CSEL_MAGIC, &dram->csel);
+#endif
+
+	mctl_itm_disable();
+	mctl_enable_dll0(para->tpr3);
+
+	/* configure external DRAM */
+	reg_val = DRAM_DCR_TYPE_DDR3;
+	reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
+
+	if (para->density == 256)
+		density = DRAM_DCR_CHIP_DENSITY_256M;
+	else if (para->density == 512)
+		density = DRAM_DCR_CHIP_DENSITY_512M;
+	else if (para->density == 1024)
+		density = DRAM_DCR_CHIP_DENSITY_1024M;
+	else if (para->density == 2048)
+		density = DRAM_DCR_CHIP_DENSITY_2048M;
+	else if (para->density == 4096)
+		density = DRAM_DCR_CHIP_DENSITY_4096M;
+	else if (para->density == 8192)
+		density = DRAM_DCR_CHIP_DENSITY_8192M;
+	else
+		density = DRAM_DCR_CHIP_DENSITY_256M;
+
+	reg_val |= DRAM_DCR_CHIP_DENSITY(density);
+	reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
+	reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
+	reg_val |= DRAM_DCR_CMD_RANK_ALL;
+	reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
+	writel(reg_val, &dram->dcr);
+
+	dramc_clock_output_en(1);
+
+	mctl_set_impedance(para->zq, para->odt_en);
+
+	mctl_set_cke_delay();
+
+	mctl_ddr3_reset();
+
+	udelay(1);
+
+	await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
+
+	mctl_enable_dllx(para->tpr3);
+
+	/* set refresh period */
+	dramc_set_autorefresh_cycle(para->clock, density);
+
+	/* set timing parameters */
+	writel(para->tpr0, &dram->tpr0);
+	writel(para->tpr1, &dram->tpr1);
+	writel(para->tpr2, &dram->tpr2);
+
+	reg_val = DRAM_MR_BURST_LENGTH(0x0);
+#if (defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I))
+	reg_val |= DRAM_MR_POWER_DOWN;
+#endif
+	reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
+	reg_val |= DRAM_MR_WRITE_RECOVERY(ddr3_write_recovery(para->clock));
+	writel(reg_val, &dram->mr);
+
+	writel(para->emr1, &dram->emr);
+	writel(para->emr2, &dram->emr2);
+	writel(para->emr3, &dram->emr3);
+
+	/* disable drift compensation and set passive DQS window mode */
+	clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
+
+#ifdef CONFIG_MACH_SUN7I
+	/* Command rate timing mode 2T & 1T */
+	if (para->tpr4 & 0x1)
+		setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
+#endif
+	/* initialize external DRAM */
+	mctl_ddr3_initialize();
+
+	/* scan read pipe value */
+	mctl_itm_enable();
+
+	/* Hardware DQS gate training */
+	ret_val = dramc_scan_readpipe();
+
+	if (ret_val < 0)
+		return 0;
+
+	/* allow to override the DQS training results with a custom delay */
+	if (para->dqs_gating_delay)
+		mctl_set_dqs_gating_delay(0, para->dqs_gating_delay);
+
+	/* set the DQS gating window type */
+	if (para->active_windowing)
+		clrbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
+	else
+		setbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
+
+	mctl_itm_reset();
+
+	/* configure all host port */
+	mctl_configure_hostport();
+
+	return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
+}
+
+unsigned long dramc_init(struct dram_para *para)
+{
+	unsigned long dram_size, actual_density;
+
+	/* If the dram configuration is not provided, use a default */
+	if (!para)
+		return 0;
+
+	/* if everything is known, then autodetection is not necessary */
+	if (para->io_width && para->bus_width && para->density)
+		return dramc_init_helper(para);
+
+	/* try to autodetect the DRAM bus width and density */
+	para->io_width  = 16;
+	para->bus_width = 32;
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I)
+	/* only A0-A14 address lines on A10/A13, limiting max density to 4096 */
+	para->density = 4096;
+#else
+	/* all A0-A15 address lines on A20, which allow density 8192 */
+	para->density = 8192;
+#endif
+
+	dram_size = dramc_init_helper(para);
+	if (!dram_size) {
+		/* if 32-bit bus width failed, try 16-bit bus width instead */
+		para->bus_width = 16;
+		dram_size = dramc_init_helper(para);
+		if (!dram_size) {
+			/* if 16-bit bus width also failed, then bail out */
+			return dram_size;
+		}
+	}
+
+	/* check if we need to adjust the density */
+	actual_density = (dram_size >> 17) * para->io_width / para->bus_width;
+
+	if (actual_density != para->density) {
+		/* update the density and re-initialize DRAM again */
+		para->density = actual_density;
+		dram_size = dramc_init_helper(para);
+	}
+
+	return dram_size;
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sun50i_h6.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sun50i_h6.c
new file mode 100644
index 000000000..32ec0bc4c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sun50i_h6.c
@@ -0,0 +1,699 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sun50i H6 platform dram controller init
+ *
+ * (C) Copyright 2017      Icenowy Zheng <icenowy@aosc.io>
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/kconfig.h>
+
+/*
+ * The DRAM controller structure on H6 is similar to the ones on A23/A80:
+ * they all contains 3 parts, COM, CTL and PHY. (As a note on A33/A83T/H3/A64
+ * /H5/R40 CTL and PHY is composed).
+ *
+ * COM is allwinner-specific. On H6, the address mapping function is moved
+ * from COM to CTL (with the standard ADDRMAP registers on DesignWare memory
+ * controller).
+ *
+ * CTL (controller) and PHY is from DesignWare.
+ *
+ * The CTL part is a bit similar to the one on A23/A80 (because they all
+ * originate from DesignWare), but gets more registers added.
+ *
+ * The PHY part is quite new, not seen in any previous Allwinner SoCs, and
+ * not seen on other SoCs in U-Boot. The only SoC that is also known to have
+ * similar PHY is ZynqMP.
+ */
+
+static void mctl_sys_init(struct dram_para *para);
+static void mctl_com_init(struct dram_para *para);
+static bool mctl_channel_init(struct dram_para *para);
+
+static bool mctl_core_init(struct dram_para *para)
+{
+	mctl_sys_init(para);
+	mctl_com_init(para);
+	switch (para->type) {
+	case SUNXI_DRAM_TYPE_LPDDR3:
+	case SUNXI_DRAM_TYPE_DDR3:
+		mctl_set_timing_params(para);
+		break;
+	default:
+		panic("Unsupported DRAM type!");
+	};
+	return mctl_channel_init(para);
+}
+
+/* PHY initialisation */
+static void mctl_phy_pir_init(u32 val)
+{
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+
+	writel(val, &mctl_phy->pir);
+	writel(val | BIT(0), &mctl_phy->pir);	/* Start initialisation. */
+	mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0));
+}
+
+enum {
+	MBUS_PORT_CPU           = 0,
+	MBUS_PORT_GPU           = 1,
+	MBUS_PORT_MAHB          = 2,
+	MBUS_PORT_DMA           = 3,
+	MBUS_PORT_VE            = 4,
+	MBUS_PORT_CE            = 5,
+	MBUS_PORT_TSC0          = 6,
+	MBUS_PORT_NDFC0         = 8,
+	MBUS_PORT_CSI0          = 11,
+	MBUS_PORT_DI0           = 14,
+	MBUS_PORT_DI1           = 15,
+	MBUS_PORT_DE300         = 16,
+	MBUS_PORT_IOMMU         = 25,
+	MBUS_PORT_VE2           = 26,
+	MBUS_PORT_USB3        = 37,
+	MBUS_PORT_PCIE          = 38,
+	MBUS_PORT_VP9           = 39,
+	MBUS_PORT_HDCP2       = 40,
+};
+
+enum {
+	MBUS_QOS_LOWEST = 0,
+	MBUS_QOS_LOW,
+	MBUS_QOS_HIGH,
+	MBUS_QOS_HIGHEST
+};
+inline void mbus_configure_port(u8 port,
+				bool bwlimit,
+				bool priority,
+				u8 qos,
+				u8 waittime,
+				u8 acs,
+				u16 bwl0,
+				u16 bwl1,
+				u16 bwl2)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
+			   | (priority ? (1 << 1) : 0)
+			   | ((qos & 0x3) << 2)
+			   | ((waittime & 0xf) << 4)
+			   | ((acs & 0xff) << 8)
+			   | (bwl0 << 16) );
+	const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
+
+	debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
+	writel(cfg0, &mctl_com->master[port].cfg0);
+	writel(cfg1, &mctl_com->master[port].cfg1);
+}
+
+#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2)	\
+	mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \
+			    MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
+
+static void mctl_set_master_priority(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel(399, &mctl_com->tmr);
+	writel(BIT(16), &mctl_com->bwcr);
+
+	MBUS_CONF(  CPU,  true, HIGHEST, 0,  256,  128,  100);
+	MBUS_CONF(  GPU,  true,    HIGH, 0, 1536, 1400,  256);
+	MBUS_CONF( MAHB,  true, HIGHEST, 0,  512,  256,   96);
+	MBUS_CONF(  DMA,  true,    HIGH, 0,  256,  100,   80);
+	MBUS_CONF(   VE,  true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF(   CE,  true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF( TSC0,  true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF(NDFC0,  true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF( CSI0,  true,    HIGH, 0,  256,  128,  100);
+	MBUS_CONF(  DI0,  true,    HIGH, 0, 1024,  256,   64);
+	MBUS_CONF(DE300,  true, HIGHEST, 6, 8192, 2800, 2400);
+	MBUS_CONF(IOMMU,  true, HIGHEST, 0,  100,   64,   32);
+	MBUS_CONF(  VE2,  true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF( USB3,  true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF( PCIE,  true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF(  VP9,  true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF(HDCP2,  true,    HIGH, 2,  100,   64,   32);
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+	struct sunxi_ccm_reg * const ccm =
+			(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	/* Put all DRAM-related blocks to reset state */
+	clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE | MBUS_RESET);
+	clrbits_le32(&ccm->dram_gate_reset, BIT(0));
+	udelay(5);
+	writel(0, &ccm->dram_gate_reset);
+	clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+	clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
+
+	udelay(5);
+
+	/* Set PLL5 rate to doubled DRAM clock rate */
+	writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN |
+	       CCM_PLL5_CTRL_N(para->clk * 2 / 24 - 1), &ccm->pll5_cfg);
+	mctl_await_completion(&ccm->pll5_cfg, CCM_PLL5_LOCK, CCM_PLL5_LOCK);
+
+	/* Configure DRAM mod clock */
+	writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg);
+	setbits_le32(&ccm->dram_clk_cfg, DRAM_CLK_UPDATE);
+	writel(BIT(RESET_SHIFT), &ccm->dram_gate_reset);
+	udelay(5);
+	setbits_le32(&ccm->dram_gate_reset, BIT(0));
+
+	/* Disable all channels */
+	writel(0, &mctl_com->maer0);
+	writel(0, &mctl_com->maer1);
+	writel(0, &mctl_com->maer2);
+
+	/* Configure MBUS and enable DRAM mod reset */
+	setbits_le32(&ccm->mbus_cfg, MBUS_RESET);
+	setbits_le32(&ccm->mbus_cfg, MBUS_ENABLE);
+	setbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
+	udelay(5);
+
+	/* Unknown hack from the BSP, which enables access of mctl_ctl regs */
+	writel(0x8000, &mctl_ctl->unk_0x00c);
+}
+
+static void mctl_set_addrmap(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	u8 cols = para->cols;
+	u8 rows = para->rows;
+	u8 ranks = para->ranks;
+
+	if (!para->bus_full_width)
+		cols -= 1;
+
+	/* Ranks */
+	if (ranks == 2)
+		mctl_ctl->addrmap[0] = rows + cols - 3;
+	else
+		mctl_ctl->addrmap[0] = 0x1F;
+
+	/* Banks, hardcoded to 8 banks now */
+	mctl_ctl->addrmap[1] = (cols - 2) | (cols - 2) << 8 | (cols - 2) << 16;
+
+	/* Columns */
+	mctl_ctl->addrmap[2] = 0;
+	switch (cols) {
+	case 7:
+		mctl_ctl->addrmap[3] = 0x1F1F1F00;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 8:
+		mctl_ctl->addrmap[3] = 0x1F1F0000;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 9:
+		mctl_ctl->addrmap[3] = 0x1F000000;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 10:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 11:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0x1F00;
+		break;
+	case 12:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0;
+		break;
+	default:
+		panic("Unsupported DRAM configuration: column number invalid\n");
+	}
+
+	/* Rows */
+	mctl_ctl->addrmap[5] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+	switch (rows) {
+	case 13:
+		mctl_ctl->addrmap[6] = (cols - 3) | 0x0F0F0F00;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 14:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | 0x0F0F0000;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 15:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | 0x0F000000;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 16:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 17:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = (cols - 3) | 0x0F00;
+		break;
+	case 18:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = (cols - 3) | ((cols - 3) << 8);
+		break;
+	default:
+		panic("Unsupported DRAM configuration: row number invalid\n");
+	}
+
+	/* Bank groups, DDR4 only */
+	mctl_ctl->addrmap[8] = 0x3F3F;
+}
+
+static void mctl_com_init(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	u32 reg_val, tmp;
+
+	mctl_set_addrmap(para);
+
+	setbits_le32(&mctl_com->cr, BIT(31));
+
+	/* The bonding ID seems to be always 7. */
+	if (readl(SUNXI_SIDC_BASE + 0x100) == 7)	/* bonding ID */
+		clrbits_le32(&mctl_com->cr, BIT(27));
+	else if (readl(SUNXI_SIDC_BASE + 0x100) == 3)
+		setbits_le32(&mctl_com->cr, BIT(27));
+
+	if (para->clk > 408)
+		reg_val = 0xf00;
+	else if (para->clk > 246)
+		reg_val = 0x1f00;
+	else
+		reg_val = 0x3f00;
+	clrsetbits_le32(&mctl_com->unk_0x008, 0x3f00, reg_val);
+
+	/* TODO: DDR4 */
+	reg_val = MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks);
+	if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
+		reg_val |= MSTR_DEVICETYPE_LPDDR3;
+	if (para->type == SUNXI_DRAM_TYPE_DDR3)
+		reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE;
+	if (para->bus_full_width)
+		reg_val |= MSTR_BUSWIDTH_FULL;
+	else
+		reg_val |= MSTR_BUSWIDTH_HALF;
+	writel(reg_val | BIT(31), &mctl_ctl->mstr);
+
+	if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
+		reg_val = DCR_LPDDR3 | DCR_DDR8BANK;
+	if (para->type == SUNXI_DRAM_TYPE_DDR3)
+		reg_val = DCR_DDR3 | DCR_DDR8BANK | DCR_DDR2T;
+	writel(reg_val | 0x400, &mctl_phy->dcr);
+
+	if (para->ranks == 2)
+		writel(0x0303, &mctl_ctl->odtmap);
+	else
+		writel(0x0201, &mctl_ctl->odtmap);
+
+	/* TODO: DDR4 */
+	if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
+		tmp = para->clk * 7 / 2000;
+		reg_val = 0x0400;
+		reg_val |= (tmp + 7) << 24;
+		reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16;
+	} else if (para->type == SUNXI_DRAM_TYPE_DDR3) {
+		reg_val = 0x06000400;	/* TODO?: Use CL - CWL value in [7:0] */
+	} else {
+		panic("Only (LP)DDR3 supported (type = %d)\n", para->type);
+	}
+	writel(reg_val, &mctl_ctl->odtcfg);
+
+	if (!para->bus_full_width) {
+		writel(0x0, &mctl_phy->dx[2].gcr[0]);
+		writel(0x0, &mctl_phy->dx[3].gcr[0]);
+	}
+}
+
+static void mctl_bit_delay_set(struct dram_para *para)
+{
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	int i, j;
+	u32 val;
+
+	for (i = 0; i < 4; i++) {
+		val = readl(&mctl_phy->dx[i].bdlr0);
+		for (j = 0; j < 4; j++)
+			val += para->dx_write_delays[i][j] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr0);
+
+		val = readl(&mctl_phy->dx[i].bdlr1);
+		for (j = 0; j < 4; j++)
+			val += para->dx_write_delays[i][j + 4] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr1);
+
+		val = readl(&mctl_phy->dx[i].bdlr2);
+		for (j = 0; j < 4; j++)
+			val += para->dx_write_delays[i][j + 8] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr2);
+	}
+	clrbits_le32(&mctl_phy->pgcr[0], BIT(26));
+
+	for (i = 0; i < 4; i++) {
+		val = readl(&mctl_phy->dx[i].bdlr3);
+		for (j = 0; j < 4; j++)
+			val += para->dx_read_delays[i][j] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr3);
+
+		val = readl(&mctl_phy->dx[i].bdlr4);
+		for (j = 0; j < 4; j++)
+			val += para->dx_read_delays[i][j + 4] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr4);
+
+		val = readl(&mctl_phy->dx[i].bdlr5);
+		for (j = 0; j < 4; j++)
+			val += para->dx_read_delays[i][j + 8] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr5);
+
+		val = readl(&mctl_phy->dx[i].bdlr6);
+		val += (para->dx_read_delays[i][12] << 8) |
+		       (para->dx_read_delays[i][13] << 16);
+		writel(val, &mctl_phy->dx[i].bdlr6);
+	}
+	setbits_le32(&mctl_phy->pgcr[0], BIT(26));
+	udelay(1);
+
+	if (para->type != SUNXI_DRAM_TYPE_LPDDR3)
+		return;
+
+	for (i = 1; i < 14; i++) {
+		val = readl(&mctl_phy->acbdlr[i]);
+		val += 0x0a0a0a0a;
+		writel(val, &mctl_phy->acbdlr[i]);
+	}
+}
+
+static bool mctl_channel_init(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	int i;
+	u32 val;
+
+	setbits_le32(&mctl_ctl->dfiupd[0], BIT(31) | BIT(30));
+	setbits_le32(&mctl_ctl->zqctl[0], BIT(31) | BIT(30));
+	writel(0x2f05, &mctl_ctl->sched[0]);
+	setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
+	setbits_le32(&mctl_ctl->dfimisc, BIT(0));
+	setbits_le32(&mctl_ctl->unk_0x00c, BIT(8));
+	clrsetbits_le32(&mctl_phy->pgcr[1], 0x180, 0xc0);
+	/* TODO: non-LPDDR3 types */
+	clrsetbits_le32(&mctl_phy->pgcr[2], GENMASK(17, 0), ns_to_t(7800));
+	clrbits_le32(&mctl_phy->pgcr[6], BIT(0));
+	clrsetbits_le32(&mctl_phy->dxccr, 0xee0, 0x220);
+	/* TODO: VT compensation */
+	clrsetbits_le32(&mctl_phy->dsgcr, BIT(0), 0x440060);
+	clrbits_le32(&mctl_phy->vtcr[1], BIT(1));
+
+	for (i = 0; i < 4; i++)
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[0], 0xe00, 0x800);
+	for (i = 0; i < 4; i++)
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, 0x5555);
+	for (i = 0; i < 4; i++)
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, 0x1010);
+
+	udelay(100);
+
+	if (para->ranks == 2)
+		setbits_le32(&mctl_phy->dtcr[1], 0x30000);
+	else
+		clrsetbits_le32(&mctl_phy->dtcr[1], 0x30000, 0x10000);
+
+	if (sunxi_dram_is_lpddr(para->type))
+		clrbits_le32(&mctl_phy->dtcr[1], BIT(1));
+	if (para->ranks == 2) {
+		writel(0x00010001, &mctl_phy->rankidr);
+		writel(0x20000, &mctl_phy->odtcr);
+	} else {
+		writel(0x0, &mctl_phy->rankidr);
+		writel(0x10000, &mctl_phy->odtcr);
+	}
+
+	/* set bits [3:0] to 1? 0 not valid in ZynqMP d/s */
+	if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
+		clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040);
+	else
+		clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000000);
+	if (para->clk <= 792) {
+		if (para->clk <= 672) {
+			if (para->clk <= 600)
+				val = 0x300;
+			else
+				val = 0x400;
+		} else {
+			val = 0x500;
+		}
+	} else {
+		val = 0x600;
+	}
+	/* FIXME: NOT REVIEWED YET */
+	clrsetbits_le32(&mctl_phy->zq[0].zqcr, 0x700, val);
+	clrsetbits_le32(&mctl_phy->zq[0].zqpr[0], 0xff,
+			CONFIG_DRAM_ZQ & 0xff);
+	clrbits_le32(&mctl_phy->zq[0].zqor[0], 0xfffff);
+	setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ >> 8) & 0xff);
+	setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xf00) - 0x100);
+	setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xff00) << 4);
+	clrbits_le32(&mctl_phy->zq[1].zqpr[0], 0xfffff);
+	setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ >> 16) & 0xff);
+	setbits_le32(&mctl_phy->zq[1].zqpr[0], ((CONFIG_DRAM_ZQ >> 8) & 0xf00) - 0x100);
+	setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ & 0xff0000) >> 4);
+	if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
+		for (i = 1; i < 14; i++)
+			writel(0x06060606, &mctl_phy->acbdlr[i]);
+	}
+
+	val = PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT | PIR_QSGATE |
+	      PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE | PIR_WREYE;
+	if (para->type == SUNXI_DRAM_TYPE_DDR3)
+		val |= PIR_DRAMRST | PIR_WL;
+	mctl_phy_pir_init(val);
+
+	/* TODO: DDR4 types ? */
+	for (i = 0; i < 4; i++)
+		writel(0x00000909, &mctl_phy->dx[i].gcr[5]);
+
+	for (i = 0; i < 4; i++) {
+		if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
+			val = 0x0;
+		else
+			val = 0xaaaa;
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, val);
+
+		if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
+			val = 0x0;
+		else
+			val = 0x2020;
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, val);
+	}
+
+	mctl_bit_delay_set(para);
+	udelay(1);
+
+	setbits_le32(&mctl_phy->pgcr[6], BIT(0));
+	clrbits_le32(&mctl_phy->pgcr[6], 0xfff8);
+	for (i = 0; i < 4; i++)
+		clrbits_le32(&mctl_phy->dx[i].gcr[3], ~0x3ffff);
+	udelay(10);
+
+	if (readl(&mctl_phy->pgsr[0]) & 0xff00000) {
+		/* Oops! There's something wrong! */
+		debug("PLL = %x\n", readl(0x3001010));
+		debug("DRAM PHY PGSR0 = %x\n", readl(&mctl_phy->pgsr[0]));
+		for (i = 0; i < 4; i++)
+			debug("DRAM PHY DX%dRSR0 = %x\n", i, readl(&mctl_phy->dx[i].rsr[0]));
+		debug("Error while initializing DRAM PHY!\n");
+
+		return false;
+	}
+
+	if (sunxi_dram_is_lpddr(para->type))
+		clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40);
+	clrbits_le32(&mctl_phy->pgcr[1], 0x40);
+	clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
+	writel(1, &mctl_ctl->swctl);
+	mctl_await_completion(&mctl_ctl->swstat, 1, 1);
+	clrbits_le32(&mctl_ctl->rfshctl3, BIT(0));
+
+	setbits_le32(&mctl_com->unk_0x014, BIT(31));
+	writel(0xffffffff, &mctl_com->maer0);
+	writel(0x7ff, &mctl_com->maer1);
+	writel(0xffff, &mctl_com->maer2);
+
+	return true;
+}
+
+static void mctl_auto_detect_rank_width(struct dram_para *para)
+{
+	/* this is minimum size that it's supported */
+	para->cols = 8;
+	para->rows = 13;
+
+	/*
+	 * Previous versions of this driver tried to auto detect the rank
+	 * and width by looking at controller registers. However this proved
+	 * to be not reliable, so this approach here is the more robust
+	 * solution. Check the git history for details.
+	 *
+	 * Strategy here is to test most demanding combination first and least
+	 * demanding last, otherwise HW might not be fully utilized. For
+	 * example, half bus width and rank = 1 combination would also work
+	 * on HW with full bus width and rank = 2, but only 1/4 RAM would be
+	 * visible.
+	 */
+
+	debug("testing 32-bit width, rank = 2\n");
+	para->bus_full_width = 1;
+	para->ranks = 2;
+	if (mctl_core_init(para))
+		return;
+
+	debug("testing 32-bit width, rank = 1\n");
+	para->bus_full_width = 1;
+	para->ranks = 1;
+	if (mctl_core_init(para))
+		return;
+
+	debug("testing 16-bit width, rank = 2\n");
+	para->bus_full_width = 0;
+	para->ranks = 2;
+	if (mctl_core_init(para))
+		return;
+
+	debug("testing 16-bit width, rank = 1\n");
+	para->bus_full_width = 0;
+	para->ranks = 1;
+	if (mctl_core_init(para))
+		return;
+
+	panic("This DRAM setup is currently not supported.\n");
+}
+
+static void mctl_auto_detect_dram_size(struct dram_para *para)
+{
+	/* TODO: non-(LP)DDR3 */
+
+	/* detect row address bits */
+	para->cols = 8;
+	para->rows = 18;
+	mctl_core_init(para);
+
+	for (para->rows = 13; para->rows < 18; para->rows++) {
+		/* 8 banks, 8 bit per byte and 16/32 bit width */
+		if (mctl_mem_matches((1 << (para->rows + para->cols +
+					    4 + para->bus_full_width))))
+			break;
+	}
+
+	/* detect column address bits */
+	para->cols = 11;
+	mctl_core_init(para);
+
+	for (para->cols = 8; para->cols < 11; para->cols++) {
+		/* 8 bits per byte and 16/32 bit width */
+		if (mctl_mem_matches(1 << (para->cols + 1 +
+					   para->bus_full_width)))
+			break;
+	}
+}
+
+unsigned long mctl_calc_size(struct dram_para *para)
+{
+	u8 width = para->bus_full_width ? 4 : 2;
+
+	/* TODO: non-(LP)DDR3 */
+
+	/* 8 banks */
+	return (1ULL << (para->cols + para->rows + 3)) * width * para->ranks;
+}
+
+#define SUN50I_H6_LPDDR3_DX_WRITE_DELAYS			\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  4,  4,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }}
+#define SUN50I_H6_LPDDR3_DX_READ_DELAYS					\
+	{{  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 },	\
+	 {  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 },	\
+	 {  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 },	\
+	 {  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 }}
+
+#define SUN50I_H6_DDR3_DX_WRITE_DELAYS				\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }}
+#define SUN50I_H6_DDR3_DX_READ_DELAYS					\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct dram_para para = {
+		.clk = CONFIG_DRAM_CLK,
+#ifdef CONFIG_SUNXI_DRAM_H6_LPDDR3
+		.type = SUNXI_DRAM_TYPE_LPDDR3,
+		.dx_read_delays  = SUN50I_H6_LPDDR3_DX_READ_DELAYS,
+		.dx_write_delays = SUN50I_H6_LPDDR3_DX_WRITE_DELAYS,
+#elif defined(CONFIG_SUNXI_DRAM_H6_DDR3_1333)
+		.type = SUNXI_DRAM_TYPE_DDR3,
+		.dx_read_delays  = SUN50I_H6_DDR3_DX_READ_DELAYS,
+		.dx_write_delays = SUN50I_H6_DDR3_DX_WRITE_DELAYS,
+#endif
+	};
+
+	unsigned long size;
+
+	/* RES_CAL_CTRL_REG in BSP U-boot*/
+	setbits_le32(0x7010310, BIT(8));
+	clrbits_le32(0x7010318, 0x3f);
+
+	mctl_auto_detect_rank_width(&para);
+	mctl_auto_detect_dram_size(&para);
+
+	mctl_core_init(&para);
+
+	size = mctl_calc_size(&para);
+
+	clrsetbits_le32(&mctl_com->cr, 0xf0, (size >> (10 + 10 + 4)) & 0xf0);
+
+	mctl_set_master_priority();
+
+	return size;
+};
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sun50i_h616.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sun50i_h616.c
new file mode 100644
index 000000000..ef5876971
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sun50i_h616.c
@@ -0,0 +1,1023 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sun50i H616 platform dram controller driver
+ *
+ * While controller is very similar to that in H6, PHY is completely
+ * unknown. That's why this driver has plenty of magic numbers. Some
+ * meaning was nevertheless deduced from strings found in boot0 and
+ * known meaning of some dram parameters.
+ * This driver only supports DDR3 memory and omits logic for all
+ * other supported types supported by hardware.
+ *
+ * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/kconfig.h>
+
+enum {
+	MBUS_QOS_LOWEST = 0,
+	MBUS_QOS_LOW,
+	MBUS_QOS_HIGH,
+	MBUS_QOS_HIGHEST
+};
+
+inline void mbus_configure_port(u8 port,
+				bool bwlimit,
+				bool priority,
+				u8 qos,
+				u8 waittime,
+				u8 acs,
+				u16 bwl0,
+				u16 bwl1,
+				u16 bwl2)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
+			   | (priority ? (1 << 1) : 0)
+			   | ((qos & 0x3) << 2)
+			   | ((waittime & 0xf) << 4)
+			   | ((acs & 0xff) << 8)
+			   | (bwl0 << 16) );
+	const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
+
+	debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
+	writel_relaxed(cfg0, &mctl_com->master[port].cfg0);
+	writel_relaxed(cfg1, &mctl_com->master[port].cfg1);
+}
+
+#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2)	\
+	mbus_configure_port(port, bwlimit, false, \
+			    MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
+
+static void mctl_set_master_priority(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel(399, &mctl_com->tmr);
+	writel(BIT(16), &mctl_com->bwcr);
+
+	MBUS_CONF( 0, true, HIGHEST, 0,  256,  128,  100);
+	MBUS_CONF( 1, true,    HIGH, 0, 1536, 1400,  256);
+	MBUS_CONF( 2, true, HIGHEST, 0,  512,  256,   96);
+	MBUS_CONF( 3, true,    HIGH, 0,  256,  100,   80);
+	MBUS_CONF( 4, true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF( 5, true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF( 6, true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF( 8, true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF(11, true,    HIGH, 0,  256,  128,  100);
+	MBUS_CONF(14, true,    HIGH, 0, 1024,  256,   64);
+	MBUS_CONF(16, true, HIGHEST, 6, 8192, 2800, 2400);
+	MBUS_CONF(21, true, HIGHEST, 6, 2048,  768,  512);
+	MBUS_CONF(25, true, HIGHEST, 0,  100,   64,   32);
+	MBUS_CONF(26, true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF(37, true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF(38, true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF(39, true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF(40, true,    HIGH, 2,  100,   64,   32);
+
+	dmb();
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+	struct sunxi_ccm_reg * const ccm =
+			(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	/* Put all DRAM-related blocks to reset state */
+	clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE);
+	clrbits_le32(&ccm->mbus_cfg, MBUS_RESET);
+	clrbits_le32(&ccm->dram_gate_reset, BIT(GATE_SHIFT));
+	udelay(5);
+	clrbits_le32(&ccm->dram_gate_reset, BIT(RESET_SHIFT));
+	clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+	clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
+
+	udelay(5);
+
+	/* Set PLL5 rate to doubled DRAM clock rate */
+	writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN | CCM_PLL5_OUT_EN |
+	       CCM_PLL5_CTRL_N(para->clk * 2 / 24 - 1), &ccm->pll5_cfg);
+	mctl_await_completion(&ccm->pll5_cfg, CCM_PLL5_LOCK, CCM_PLL5_LOCK);
+
+	/* Configure DRAM mod clock */
+	writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg);
+	writel(BIT(RESET_SHIFT), &ccm->dram_gate_reset);
+	udelay(5);
+	setbits_le32(&ccm->dram_gate_reset, BIT(GATE_SHIFT));
+
+	/* Disable all channels */
+	writel(0, &mctl_com->maer0);
+	writel(0, &mctl_com->maer1);
+	writel(0, &mctl_com->maer2);
+
+	/* Configure MBUS and enable DRAM mod reset */
+	setbits_le32(&ccm->mbus_cfg, MBUS_RESET);
+	setbits_le32(&ccm->mbus_cfg, MBUS_ENABLE);
+
+	clrbits_le32(&mctl_com->unk_0x500, BIT(25));
+
+	setbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
+	udelay(5);
+
+	/* Unknown hack, which enables access of mctl_ctl regs */
+	writel(0x8000, &mctl_ctl->clken);
+}
+
+static void mctl_set_addrmap(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	u8 cols = para->cols;
+	u8 rows = para->rows;
+	u8 ranks = para->ranks;
+
+	if (!para->bus_full_width)
+		cols -= 1;
+
+	/* Ranks */
+	if (ranks == 2)
+		mctl_ctl->addrmap[0] = rows + cols - 3;
+	else
+		mctl_ctl->addrmap[0] = 0x1F;
+
+	/* Banks, hardcoded to 8 banks now */
+	mctl_ctl->addrmap[1] = (cols - 2) | (cols - 2) << 8 | (cols - 2) << 16;
+
+	/* Columns */
+	mctl_ctl->addrmap[2] = 0;
+	switch (cols) {
+	case 7:
+		mctl_ctl->addrmap[3] = 0x1F1F1F00;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 8:
+		mctl_ctl->addrmap[3] = 0x1F1F0000;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 9:
+		mctl_ctl->addrmap[3] = 0x1F000000;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 10:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 11:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0x1F00;
+		break;
+	case 12:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0;
+		break;
+	default:
+		panic("Unsupported DRAM configuration: column number invalid\n");
+	}
+
+	/* Rows */
+	mctl_ctl->addrmap[5] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+	switch (rows) {
+	case 13:
+		mctl_ctl->addrmap[6] = (cols - 3) | 0x0F0F0F00;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 14:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | 0x0F0F0000;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 15:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | 0x0F000000;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 16:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 17:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = (cols - 3) | 0x0F00;
+		break;
+	case 18:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = (cols - 3) | ((cols - 3) << 8);
+		break;
+	default:
+		panic("Unsupported DRAM configuration: row number invalid\n");
+	}
+
+	/* Bank groups, DDR4 only */
+	mctl_ctl->addrmap[8] = 0x3F3F;
+}
+
+static const u8 phy_init[] = {
+	0x07, 0x0b, 0x02, 0x16, 0x0d, 0x0e, 0x14, 0x19,
+	0x0a, 0x15, 0x03, 0x13, 0x04, 0x0c, 0x10, 0x06,
+	0x0f, 0x11, 0x1a, 0x01, 0x12, 0x17, 0x00, 0x08,
+	0x09, 0x05, 0x18
+};
+
+static void mctl_phy_configure_odt(void)
+{
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x388);
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x38c);
+
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x3c8);
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x3cc);
+
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x408);
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x40c);
+
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x448);
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x44c);
+
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x340);
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x344);
+
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x348);
+	writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x34c);
+
+	writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x380);
+	writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x384);
+
+	writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x3c0);
+	writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x3c4);
+
+	writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x400);
+	writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x404);
+
+	writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x440);
+	writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x444);
+
+	dmb();
+}
+
+static bool mctl_phy_write_leveling(struct dram_para *para)
+{
+	bool result = true;
+	u32 val;
+
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0, 0x80);
+	writel(4, SUNXI_DRAM_PHY0_BASE + 0xc);
+	writel(0x40, SUNXI_DRAM_PHY0_BASE + 0x10);
+
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
+
+	if (para->bus_full_width)
+		val = 0xf;
+	else
+		val = 3;
+
+	mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x188), val, val);
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
+
+	val = readl(SUNXI_DRAM_PHY0_BASE + 0x258);
+	if (val == 0 || val == 0x3f)
+		result = false;
+	val = readl(SUNXI_DRAM_PHY0_BASE + 0x25c);
+	if (val == 0 || val == 0x3f)
+		result = false;
+	val = readl(SUNXI_DRAM_PHY0_BASE + 0x318);
+	if (val == 0 || val == 0x3f)
+		result = false;
+	val = readl(SUNXI_DRAM_PHY0_BASE + 0x31c);
+	if (val == 0 || val == 0x3f)
+		result = false;
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0);
+
+	if (para->ranks == 2) {
+		clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0, 0x40);
+
+		setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
+
+		if (para->bus_full_width)
+			val = 0xf;
+		else
+			val = 3;
+
+		mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x188), val, val);
+
+		clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
+	}
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0);
+
+	return result;
+}
+
+static bool mctl_phy_read_calibration(struct dram_para *para)
+{
+	bool result = true;
+	u32 val, tmp;
+
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0x30, 0x20);
+
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 1);
+
+	if (para->bus_full_width)
+		val = 0xf;
+	else
+		val = 3;
+
+	while ((readl(SUNXI_DRAM_PHY0_BASE + 0x184) & val) != val) {
+		if (readl(SUNXI_DRAM_PHY0_BASE + 0x184) & 0x20) {
+			result = false;
+			break;
+		}
+	}
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 1);
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0x30);
+
+	if (para->ranks == 2) {
+		clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0x30, 0x10);
+
+		setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 1);
+
+		while ((readl(SUNXI_DRAM_PHY0_BASE + 0x184) & val) != val) {
+			if (readl(SUNXI_DRAM_PHY0_BASE + 0x184) & 0x20) {
+				result = false;
+				break;
+			}
+		}
+
+		setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 1);
+	}
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0x30);
+
+	val = readl(SUNXI_DRAM_PHY0_BASE + 0x274) & 7;
+	tmp = readl(SUNXI_DRAM_PHY0_BASE + 0x26c) & 7;
+	if (val < tmp)
+		val = tmp;
+	tmp = readl(SUNXI_DRAM_PHY0_BASE + 0x32c) & 7;
+	if (val < tmp)
+		val = tmp;
+	tmp = readl(SUNXI_DRAM_PHY0_BASE + 0x334) & 7;
+	if (val < tmp)
+		val = tmp;
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x38, 0x7, (val + 2) & 7);
+
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 0x20);
+
+	return result;
+}
+
+static bool mctl_phy_read_training(struct dram_para *para)
+{
+	u32 val1, val2, *ptr1, *ptr2;
+	bool result = true;
+	int i;
+
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 3, 2);
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x804, 0x3f, 0xf);
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x808, 0x3f, 0xf);
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0xa04, 0x3f, 0xf);
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0xa08, 0x3f, 0xf);
+
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 6);
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 1);
+
+	mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x840), 0xc, 0xc);
+	if (readl(SUNXI_DRAM_PHY0_BASE + 0x840) & 3)
+		result = false;
+
+	if (para->bus_full_width) {
+		mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0xa40), 0xc, 0xc);
+		if (readl(SUNXI_DRAM_PHY0_BASE + 0xa40) & 3)
+			result = false;
+	}
+
+	ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x898);
+	ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x850);
+	for (i = 0; i < 9; i++) {
+		val1 = readl(&ptr1[i]);
+		val2 = readl(&ptr2[i]);
+		if (val1 - val2 <= 6)
+			result = false;
+	}
+	ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x8bc);
+	ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x874);
+	for (i = 0; i < 9; i++) {
+		val1 = readl(&ptr1[i]);
+		val2 = readl(&ptr2[i]);
+		if (val1 - val2 <= 6)
+			result = false;
+	}
+
+	if (para->bus_full_width) {
+		ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xa98);
+		ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xa50);
+		for (i = 0; i < 9; i++) {
+			val1 = readl(&ptr1[i]);
+			val2 = readl(&ptr2[i]);
+			if (val1 - val2 <= 6)
+				result = false;
+		}
+
+		ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xabc);
+		ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xa74);
+		for (i = 0; i < 9; i++) {
+			val1 = readl(&ptr1[i]);
+			val2 = readl(&ptr2[i]);
+			if (val1 - val2 <= 6)
+				result = false;
+		}
+	}
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 3);
+
+	if (para->ranks == 2) {
+		/* maybe last parameter should be 1? */
+		clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 3, 2);
+
+		setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 6);
+		setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 1);
+
+		mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x840), 0xc, 0xc);
+		if (readl(SUNXI_DRAM_PHY0_BASE + 0x840) & 3)
+			result = false;
+
+		if (para->bus_full_width) {
+			mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0xa40), 0xc, 0xc);
+			if (readl(SUNXI_DRAM_PHY0_BASE + 0xa40) & 3)
+				result = false;
+		}
+
+		clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 3);
+	}
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 3);
+
+	return result;
+}
+
+static bool mctl_phy_write_training(struct dram_para *para)
+{
+	u32 val1, val2, *ptr1, *ptr2;
+	bool result = true;
+	int i;
+
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x134);
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x138);
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x19c);
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x1a0);
+
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 0xc, 8);
+
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x10);
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x20);
+
+	mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x8e0), 3, 3);
+	if (readl(SUNXI_DRAM_PHY0_BASE + 0x8e0) & 0xc)
+		result = false;
+
+	if (para->bus_full_width) {
+		mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0xae0), 3, 3);
+		if (readl(SUNXI_DRAM_PHY0_BASE + 0xae0) & 0xc)
+			result = false;
+	}
+
+	ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x938);
+	ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x8f0);
+	for (i = 0; i < 9; i++) {
+		val1 = readl(&ptr1[i]);
+		val2 = readl(&ptr2[i]);
+		if (val1 - val2 <= 6)
+			result = false;
+	}
+	ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x95c);
+	ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x914);
+	for (i = 0; i < 9; i++) {
+		val1 = readl(&ptr1[i]);
+		val2 = readl(&ptr2[i]);
+		if (val1 - val2 <= 6)
+			result = false;
+	}
+
+	if (para->bus_full_width) {
+		ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xb38);
+		ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xaf0);
+		for (i = 0; i < 9; i++) {
+			val1 = readl(&ptr1[i]);
+			val2 = readl(&ptr2[i]);
+			if (val1 - val2 <= 6)
+				result = false;
+		}
+		ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xb5c);
+		ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xb14);
+		for (i = 0; i < 9; i++) {
+			val1 = readl(&ptr1[i]);
+			val2 = readl(&ptr2[i]);
+			if (val1 - val2 <= 6)
+				result = false;
+		}
+	}
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x60);
+
+	if (para->ranks == 2) {
+		clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 0xc, 4);
+
+		setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x10);
+		setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x20);
+
+		mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x8e0), 3, 3);
+		if (readl(SUNXI_DRAM_PHY0_BASE + 0x8e0) & 0xc)
+			result = false;
+
+		if (para->bus_full_width) {
+			mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0xae0), 3, 3);
+			if (readl(SUNXI_DRAM_PHY0_BASE + 0xae0) & 0xc)
+				result = false;
+		}
+
+		clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x60);
+	}
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 0xc);
+
+	return result;
+}
+
+static bool mctl_phy_bit_delay_compensation(struct dram_para *para)
+{
+	u32 *ptr;
+	int i;
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x60, 1);
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 8);
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x10);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x484);
+	for (i = 0; i < 9; i++) {
+		writel_relaxed(0x16, ptr);
+		writel_relaxed(0x16, ptr + 0x30);
+		ptr += 2;
+	}
+	writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x4d0);
+	writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x590);
+	writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x4cc);
+	writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x58c);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x4d8);
+	for (i = 0; i < 9; i++) {
+		writel_relaxed(0x1a, ptr);
+		writel_relaxed(0x1a, ptr + 0x30);
+		ptr += 2;
+	}
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x524);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x5e4);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x520);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x5e0);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x604);
+	for (i = 0; i < 9; i++) {
+		writel_relaxed(0x1a, ptr);
+		writel_relaxed(0x1a, ptr + 0x30);
+		ptr += 2;
+	}
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x650);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x710);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x64c);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x70c);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x658);
+	for (i = 0; i < 9; i++) {
+		writel_relaxed(0x1a, ptr);
+		writel_relaxed(0x1a, ptr + 0x30);
+		ptr += 2;
+	}
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x6a4);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x764);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x6a0);
+	writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x760);
+
+	dmb();
+
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x60, 1);
+
+	/* second part */
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x54, 0x80);
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 4);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x480);
+	for (i = 0; i < 9; i++) {
+		writel_relaxed(0x10, ptr);
+		writel_relaxed(0x10, ptr + 0x30);
+		ptr += 2;
+	}
+	writel_relaxed(0x18, SUNXI_DRAM_PHY0_BASE + 0x528);
+	writel_relaxed(0x18, SUNXI_DRAM_PHY0_BASE + 0x5e8);
+	writel_relaxed(0x18, SUNXI_DRAM_PHY0_BASE + 0x4c8);
+	writel_relaxed(0x18, SUNXI_DRAM_PHY0_BASE + 0x588);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x4d4);
+	for (i = 0; i < 9; i++) {
+		writel_relaxed(0x12, ptr);
+		writel_relaxed(0x12, ptr + 0x30);
+		ptr += 2;
+	}
+	writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x52c);
+	writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x5ec);
+	writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x51c);
+	writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x5dc);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x600);
+	for (i = 0; i < 9; i++) {
+		writel_relaxed(0x12, ptr);
+		writel_relaxed(0x12, ptr + 0x30);
+		ptr += 2;
+	}
+	writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x6a8);
+	writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x768);
+	writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x648);
+	writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x708);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x654);
+	for (i = 0; i < 9; i++) {
+		writel_relaxed(0x14, ptr);
+		writel_relaxed(0x14, ptr + 0x30);
+		ptr += 2;
+	}
+	writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x6ac);
+	writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x76c);
+	writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x69c);
+	writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x75c);
+
+	dmb();
+
+	setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x54, 0x80);
+
+	return true;
+}
+
+static bool mctl_phy_init(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	u32 val, *ptr;
+	int i;
+
+	if (para->bus_full_width)
+		val = 0xf;
+	else
+		val = 3;
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x3c, 0xf, val);
+
+	writel(0xd, SUNXI_DRAM_PHY0_BASE + 0x14);
+	writel(0xd, SUNXI_DRAM_PHY0_BASE + 0x35c);
+	writel(0xd, SUNXI_DRAM_PHY0_BASE + 0x368);
+	writel(0xd, SUNXI_DRAM_PHY0_BASE + 0x374);
+
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x18);
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x360);
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x36c);
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x378);
+
+	writel(9, SUNXI_DRAM_PHY0_BASE + 0x1c);
+	writel(9, SUNXI_DRAM_PHY0_BASE + 0x364);
+	writel(9, SUNXI_DRAM_PHY0_BASE + 0x370);
+	writel(9, SUNXI_DRAM_PHY0_BASE + 0x37c);
+
+	ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xc0);
+	for (i = 0; i < ARRAY_SIZE(phy_init); i++)
+		writel(phy_init[i], &ptr[i]);
+
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_UNKNOWN_FEATURE)) {
+		ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x780);
+		for (i = 0; i < 32; i++)
+			writel(0x16, &ptr[i]);
+		writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x78c);
+		writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x7a4);
+		writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x7b8);
+		writel(0x8, SUNXI_DRAM_PHY0_BASE + 0x7d4);
+		writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x7dc);
+		writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x7e0);
+	}
+
+	writel(0x80, SUNXI_DRAM_PHY0_BASE + 0x3dc);
+	writel(0x80, SUNXI_DRAM_PHY0_BASE + 0x45c);
+
+	if (IS_ENABLED(DRAM_ODT_EN))
+		mctl_phy_configure_odt();
+
+	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 7, 0xa);
+
+	if (para->clk <= 672)
+		writel(0xf, SUNXI_DRAM_PHY0_BASE + 0x20);
+	if (para->clk > 500) {
+		clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x144, BIT(7));
+		clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x14c, 0xe0);
+	} else {
+		setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x144, BIT(7));
+		clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x14c, 0xe0, 0x20);
+	}
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x14c, 8);
+
+	mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x180), 4, 4);
+
+	writel(0x37, SUNXI_DRAM_PHY0_BASE + 0x58);
+	clrbits_le32(&mctl_com->unk_0x500, 0x200);
+
+	writel(0, &mctl_ctl->swctl);
+	setbits_le32(&mctl_ctl->dfimisc, 1);
+
+	/* start DFI init */
+	setbits_le32(&mctl_ctl->dfimisc, 0x20);
+	writel(1, &mctl_ctl->swctl);
+	mctl_await_completion(&mctl_ctl->swstat, 1, 1);
+	/* poll DFI init complete */
+	mctl_await_completion(&mctl_ctl->dfistat, 1, 1);
+	writel(0, &mctl_ctl->swctl);
+	clrbits_le32(&mctl_ctl->dfimisc, 0x20);
+
+	clrbits_le32(&mctl_ctl->pwrctl, 0x20);
+	writel(1, &mctl_ctl->swctl);
+	mctl_await_completion(&mctl_ctl->swstat, 1, 1);
+	mctl_await_completion(&mctl_ctl->statr, 3, 1);
+
+	writel(0, &mctl_ctl->swctl);
+	clrbits_le32(&mctl_ctl->dfimisc, 1);
+
+	writel(1, &mctl_ctl->swctl);
+	mctl_await_completion(&mctl_ctl->swstat, 1, 1);
+
+	writel(0x1f14, &mctl_ctl->mrctrl1);
+	writel(0x80000030, &mctl_ctl->mrctrl0);
+	mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+	writel(4, &mctl_ctl->mrctrl1);
+	writel(0x80001030, &mctl_ctl->mrctrl0);
+	mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+	writel(0x20, &mctl_ctl->mrctrl1);
+	writel(0x80002030, &mctl_ctl->mrctrl0);
+	mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+	writel(0, &mctl_ctl->mrctrl1);
+	writel(0x80003030, &mctl_ctl->mrctrl0);
+	mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
+
+	writel(0, SUNXI_DRAM_PHY0_BASE + 0x54);
+
+	writel(0, &mctl_ctl->swctl);
+	clrbits_le32(&mctl_ctl->rfshctl3, 1);
+	writel(1, &mctl_ctl->swctl);
+
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_WRITE_LEVELING)) {
+		for (i = 0; i < 5; i++)
+			if (mctl_phy_write_leveling(para))
+				break;
+		if (i == 5) {
+			debug("write leveling failed!\n");
+			return false;
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_READ_CALIBRATION)) {
+		for (i = 0; i < 5; i++)
+			if (mctl_phy_read_calibration(para))
+				break;
+		if (i == 5) {
+			debug("read calibration failed!\n");
+			return false;
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_READ_TRAINING)) {
+		for (i = 0; i < 5; i++)
+			if (mctl_phy_read_training(para))
+				break;
+		if (i == 5) {
+			debug("read training failed!\n");
+			return false;
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_WRITE_TRAINING)) {
+		for (i = 0; i < 5; i++)
+			if (mctl_phy_write_training(para))
+				break;
+		if (i == 5) {
+			debug("write training failed!\n");
+			return false;
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_BIT_DELAY_COMPENSATION))
+		mctl_phy_bit_delay_compensation(para);
+
+	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x60, 4);
+
+	return true;
+}
+
+static bool mctl_ctrl_init(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	u32 reg_val;
+
+	clrsetbits_le32(&mctl_com->unk_0x500, BIT(24), 0x200);
+	writel(0x8000, &mctl_ctl->clken);
+
+	setbits_le32(&mctl_com->unk_0x008, 0xff00);
+
+	clrsetbits_le32(&mctl_ctl->sched[0], 0xff00, 0x3000);
+
+	writel(0, &mctl_ctl->hwlpctl);
+
+	setbits_le32(&mctl_com->unk_0x008, 0xff00);
+
+	reg_val = MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks);
+	reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE;
+	if (para->bus_full_width)
+		reg_val |= MSTR_BUSWIDTH_FULL;
+	else
+		reg_val |= MSTR_BUSWIDTH_HALF;
+	writel(BIT(31) | BIT(30) | reg_val, &mctl_ctl->mstr);
+
+	if (para->ranks == 2)
+		writel(0x0303, &mctl_ctl->odtmap);
+	else
+		writel(0x0201, &mctl_ctl->odtmap);
+
+	writel(0x06000400, &mctl_ctl->odtcfg);
+	writel(0x06000400, &mctl_ctl->unk_0x2240);
+	writel(0x06000400, &mctl_ctl->unk_0x3240);
+	writel(0x06000400, &mctl_ctl->unk_0x4240);
+
+	setbits_le32(&mctl_com->cr, BIT(31));
+
+	mctl_set_addrmap(para);
+
+	mctl_set_timing_params(para);
+
+	writel(0, &mctl_ctl->pwrctl);
+
+	setbits_le32(&mctl_ctl->dfiupd[0], BIT(31) | BIT(30));
+	setbits_le32(&mctl_ctl->zqctl[0], BIT(31) | BIT(30));
+	setbits_le32(&mctl_ctl->unk_0x2180, BIT(31) | BIT(30));
+	setbits_le32(&mctl_ctl->unk_0x3180, BIT(31) | BIT(30));
+	setbits_le32(&mctl_ctl->unk_0x4180, BIT(31) | BIT(30));
+
+	setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
+	clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
+
+	writel(0, &mctl_com->maer0);
+	writel(0, &mctl_com->maer1);
+	writel(0, &mctl_com->maer2);
+
+	writel(0x20, &mctl_ctl->pwrctl);
+	setbits_le32(&mctl_ctl->clken, BIT(8));
+
+	clrsetbits_le32(&mctl_com->unk_0x500, BIT(24), 0x300);
+	/* this write seems to enable PHY MMIO region */
+	setbits_le32(&mctl_com->unk_0x500, BIT(24));
+
+	if (!mctl_phy_init(para))
+		return false;
+
+	writel(0, &mctl_ctl->swctl);
+	clrbits_le32(&mctl_ctl->rfshctl3, BIT(0));
+
+	setbits_le32(&mctl_com->unk_0x014, BIT(31));
+	writel(0xffffffff, &mctl_com->maer0);
+	writel(0x7ff, &mctl_com->maer1);
+	writel(0xffff, &mctl_com->maer2);
+
+	writel(1, &mctl_ctl->swctl);
+	mctl_await_completion(&mctl_ctl->swstat, 1, 1);
+
+	return true;
+}
+
+static bool mctl_core_init(struct dram_para *para)
+{
+	mctl_sys_init(para);
+
+	return mctl_ctrl_init(para);
+}
+
+static void mctl_auto_detect_rank_width(struct dram_para *para)
+{
+	/* this is minimum size that it's supported */
+	para->cols = 8;
+	para->rows = 13;
+
+	/*
+	 * Strategy here is to test most demanding combination first and least
+	 * demanding last, otherwise HW might not be fully utilized. For
+	 * example, half bus width and rank = 1 combination would also work
+	 * on HW with full bus width and rank = 2, but only 1/4 RAM would be
+	 * visible.
+	 */
+
+	debug("testing 32-bit width, rank = 2\n");
+	para->bus_full_width = 1;
+	para->ranks = 2;
+	if (mctl_core_init(para))
+		return;
+
+	debug("testing 32-bit width, rank = 1\n");
+	para->bus_full_width = 1;
+	para->ranks = 1;
+	if (mctl_core_init(para))
+		return;
+
+	debug("testing 16-bit width, rank = 2\n");
+	para->bus_full_width = 0;
+	para->ranks = 2;
+	if (mctl_core_init(para))
+		return;
+
+	debug("testing 16-bit width, rank = 1\n");
+	para->bus_full_width = 0;
+	para->ranks = 1;
+	if (mctl_core_init(para))
+		return;
+
+	panic("This DRAM setup is currently not supported.\n");
+}
+
+static void mctl_auto_detect_dram_size(struct dram_para *para)
+{
+	/* detect row address bits */
+	para->cols = 8;
+	para->rows = 18;
+	mctl_core_init(para);
+
+	for (para->rows = 13; para->rows < 18; para->rows++) {
+		/* 8 banks, 8 bit per byte and 16/32 bit width */
+		if (mctl_mem_matches((1 << (para->rows + para->cols +
+					    4 + para->bus_full_width))))
+			break;
+	}
+
+	/* detect column address bits */
+	para->cols = 11;
+	mctl_core_init(para);
+
+	for (para->cols = 8; para->cols < 11; para->cols++) {
+		/* 8 bits per byte and 16/32 bit width */
+		if (mctl_mem_matches(1 << (para->cols + 1 +
+					   para->bus_full_width)))
+			break;
+	}
+}
+
+static unsigned long mctl_calc_size(struct dram_para *para)
+{
+	u8 width = para->bus_full_width ? 4 : 2;
+
+	/* 8 banks */
+	return (1ULL << (para->cols + para->rows + 3)) * width * para->ranks;
+}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct dram_para para = {
+		.clk = CONFIG_DRAM_CLK,
+		.type = SUNXI_DRAM_TYPE_DDR3,
+	};
+	unsigned long size;
+
+	setbits_le32(0x7010310, BIT(8));
+	clrbits_le32(0x7010318, 0x3f);
+
+	mctl_auto_detect_rank_width(&para);
+	mctl_auto_detect_dram_size(&para);
+
+	mctl_core_init(&para);
+
+	size = mctl_calc_size(&para);
+
+	mctl_set_master_priority();
+
+	return size;
+};
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sun6i.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sun6i.c
new file mode 100644
index 000000000..0590110d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sun6i.c
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Sun6i platform dram controller init.
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ */
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+#include <linux/delay.h>
+
+#define DRAM_CLK (CONFIG_DRAM_CLK * 1000000)
+
+struct dram_sun6i_para {
+	u8 bus_width;
+	u8 chan;
+	u8 rank;
+	u8 rows;
+	u16 page_size;
+};
+
+static void mctl_sys_init(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int dram_clk_div = 2;
+
+	clock_set_pll5(DRAM_CLK * dram_clk_div, false);
+
+	clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV0_MASK,
+		CCM_DRAMCLK_CFG_DIV0(dram_clk_div) | CCM_DRAMCLK_CFG_RST |
+		CCM_DRAMCLK_CFG_UPD);
+	mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+	writel(MDFS_CLK_DEFAULT, &ccm->mdfs_clk_cfg);
+
+	/* deassert mctl reset */
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+
+	/* enable mctl clock */
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+}
+
+static void mctl_dll_init(int ch_index, struct dram_sun6i_para *para)
+{
+	struct sunxi_mctl_phy_reg *mctl_phy;
+
+	if (ch_index == 0)
+		mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	else
+		mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+
+	/* disable + reset dlls */
+	writel(MCTL_DLLCR_DISABLE, &mctl_phy->acdllcr);
+	writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx0dllcr);
+	writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx1dllcr);
+	if (para->bus_width == 32) {
+		writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx2dllcr);
+		writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx3dllcr);
+	}
+	udelay(2);
+
+	/* enable + reset dlls */
+	writel(0, &mctl_phy->acdllcr);
+	writel(0, &mctl_phy->dx0dllcr);
+	writel(0, &mctl_phy->dx1dllcr);
+	if (para->bus_width == 32) {
+		writel(0, &mctl_phy->dx2dllcr);
+		writel(0, &mctl_phy->dx3dllcr);
+	}
+	udelay(22);
+
+	/* enable and release reset of dlls */
+	writel(MCTL_DLLCR_NRESET, &mctl_phy->acdllcr);
+	writel(MCTL_DLLCR_NRESET, &mctl_phy->dx0dllcr);
+	writel(MCTL_DLLCR_NRESET, &mctl_phy->dx1dllcr);
+	if (para->bus_width == 32) {
+		writel(MCTL_DLLCR_NRESET, &mctl_phy->dx2dllcr);
+		writel(MCTL_DLLCR_NRESET, &mctl_phy->dx3dllcr);
+	}
+	udelay(22);
+}
+
+static bool mctl_rank_detect(u32 *gsr0, int rank)
+{
+	const u32 done = MCTL_DX_GSR0_RANK0_TRAIN_DONE << rank;
+	const u32 err = MCTL_DX_GSR0_RANK0_TRAIN_ERR << rank;
+
+	mctl_await_completion(gsr0, done, done);
+	mctl_await_completion(gsr0 + 0x10, done, done);
+
+	return !(readl(gsr0) & err) && !(readl(gsr0 + 0x10) & err);
+}
+
+static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg *mctl_ctl;
+	struct sunxi_mctl_phy_reg *mctl_phy;
+
+	if (ch_index == 0) {
+		mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+		mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	} else {
+		mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL1_BASE;
+		mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+	}
+
+	writel(MCTL_MCMD_NOP, &mctl_ctl->mcmd);
+	mctl_await_completion(&mctl_ctl->mcmd, MCTL_MCMD_BUSY, 0);
+
+	/* PHY initialization */
+	writel(MCTL_PGCR, &mctl_phy->pgcr);
+	writel(MCTL_MR0, &mctl_phy->mr0);
+	writel(MCTL_MR1, &mctl_phy->mr1);
+	writel(MCTL_MR2, &mctl_phy->mr2);
+	writel(MCTL_MR3, &mctl_phy->mr3);
+
+	writel((MCTL_TITMSRST << 18) | (MCTL_TDLLLOCK << 6) | MCTL_TDLLSRST,
+	       &mctl_phy->ptr0);
+
+	writel((MCTL_TDINIT1 << 19) | MCTL_TDINIT0, &mctl_phy->ptr1);
+	writel((MCTL_TDINIT3 << 17) | MCTL_TDINIT2, &mctl_phy->ptr2);
+
+	writel((MCTL_TCCD << 31) | (MCTL_TRC << 25) | (MCTL_TRRD << 21) |
+	       (MCTL_TRAS << 16) | (MCTL_TRCD << 12) | (MCTL_TRP << 8) |
+	       (MCTL_TWTR << 5) | (MCTL_TRTP << 2) | (MCTL_TMRD << 0),
+	       &mctl_phy->dtpr0);
+
+	writel((MCTL_TDQSCKMAX << 27) | (MCTL_TDQSCK << 24) |
+	       (MCTL_TRFC << 16) | (MCTL_TRTODT << 11) |
+	       ((MCTL_TMOD - 12) << 9) | (MCTL_TFAW << 3) | (0 << 2) |
+	       (MCTL_TAOND << 0), &mctl_phy->dtpr1);
+
+	writel((MCTL_TDLLK << 19) | (MCTL_TCKE << 15) | (MCTL_TXPDLL << 10) |
+	       (MCTL_TEXSR << 0), &mctl_phy->dtpr2);
+
+	writel(1, &mctl_ctl->dfitphyupdtype0);
+	writel(MCTL_DCR_DDR3, &mctl_phy->dcr);
+	writel(MCTL_DSGCR, &mctl_phy->dsgcr);
+	writel(MCTL_DXCCR, &mctl_phy->dxccr);
+	writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx0gcr);
+	writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx1gcr);
+	writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx2gcr);
+	writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx3gcr);
+
+	mctl_await_completion(&mctl_phy->pgsr, 0x03, 0x03);
+
+	writel(CONFIG_DRAM_ZQ, &mctl_phy->zq0cr1);
+
+	setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS);
+	writel(MCTL_PIR_STEP1, &mctl_phy->pir);
+	udelay(10);
+	mctl_await_completion(&mctl_phy->pgsr, 0x1f, 0x1f);
+
+	/* rank detect */
+	if (!mctl_rank_detect(&mctl_phy->dx0gsr0, 1)) {
+		para->rank = 1;
+		clrbits_le32(&mctl_phy->pgcr, MCTL_PGCR_RANK);
+	}
+
+	/*
+	 * channel detect, check channel 1 dx0 and dx1 have rank 0, if not
+	 * assume nothing is connected to channel 1.
+	 */
+	if (ch_index == 1 && !mctl_rank_detect(&mctl_phy->dx0gsr0, 0)) {
+		para->chan = 1;
+		clrbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN);
+		return;
+	}
+
+	/* bus width detect, if dx2 and dx3 don't have rank 0, assume 16 bit */
+	if (!mctl_rank_detect(&mctl_phy->dx2gsr0, 0)) {
+		para->bus_width = 16;
+		para->page_size = 2048;
+		setbits_le32(&mctl_phy->dx2dllcr, MCTL_DLLCR_DISABLE);
+		setbits_le32(&mctl_phy->dx3dllcr, MCTL_DLLCR_DISABLE);
+		clrbits_le32(&mctl_phy->dx2gcr, MCTL_DX_GCR_EN);
+		clrbits_le32(&mctl_phy->dx3gcr, MCTL_DX_GCR_EN);
+	}
+
+	setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS);
+	writel(MCTL_PIR_STEP2, &mctl_phy->pir);
+	udelay(10);
+	mctl_await_completion(&mctl_phy->pgsr, 0x11, 0x11);
+
+	if (readl(&mctl_phy->pgsr) & MCTL_PGSR_TRAIN_ERR_MASK)
+		panic("Training error initialising DRAM\n");
+
+	/* Move to configure state */
+	writel(MCTL_SCTL_CONFIG, &mctl_ctl->sctl);
+	mctl_await_completion(&mctl_ctl->sstat, 0x07, 0x01);
+
+	/* Set number of clks per micro-second */
+	writel(DRAM_CLK / 1000000, &mctl_ctl->togcnt1u);
+	/* Set number of clks per 100 nano-seconds */
+	writel(DRAM_CLK / 10000000, &mctl_ctl->togcnt100n);
+	/* Set memory timing registers */
+	writel(MCTL_TREFI, &mctl_ctl->trefi);
+	writel(MCTL_TMRD, &mctl_ctl->tmrd);
+	writel(MCTL_TRFC, &mctl_ctl->trfc);
+	writel((MCTL_TPREA << 16) | MCTL_TRP, &mctl_ctl->trp);
+	writel(MCTL_TRTW, &mctl_ctl->trtw);
+	writel(MCTL_TAL, &mctl_ctl->tal);
+	writel(MCTL_TCL, &mctl_ctl->tcl);
+	writel(MCTL_TCWL, &mctl_ctl->tcwl);
+	writel(MCTL_TRAS, &mctl_ctl->tras);
+	writel(MCTL_TRC, &mctl_ctl->trc);
+	writel(MCTL_TRCD, &mctl_ctl->trcd);
+	writel(MCTL_TRRD, &mctl_ctl->trrd);
+	writel(MCTL_TRTP, &mctl_ctl->trtp);
+	writel(MCTL_TWR, &mctl_ctl->twr);
+	writel(MCTL_TWTR, &mctl_ctl->twtr);
+	writel(MCTL_TEXSR, &mctl_ctl->texsr);
+	writel(MCTL_TXP, &mctl_ctl->txp);
+	writel(MCTL_TXPDLL, &mctl_ctl->txpdll);
+	writel(MCTL_TZQCS, &mctl_ctl->tzqcs);
+	writel(MCTL_TZQCSI, &mctl_ctl->tzqcsi);
+	writel(MCTL_TDQS, &mctl_ctl->tdqs);
+	writel(MCTL_TCKSRE, &mctl_ctl->tcksre);
+	writel(MCTL_TCKSRX, &mctl_ctl->tcksrx);
+	writel(MCTL_TCKE, &mctl_ctl->tcke);
+	writel(MCTL_TMOD, &mctl_ctl->tmod);
+	writel(MCTL_TRSTL, &mctl_ctl->trstl);
+	writel(MCTL_TZQCL, &mctl_ctl->tzqcl);
+	writel(MCTL_TMRR, &mctl_ctl->tmrr);
+	writel(MCTL_TCKESR, &mctl_ctl->tckesr);
+	writel(MCTL_TDPD, &mctl_ctl->tdpd);
+
+	/* Unknown magic performed by boot0 */
+	setbits_le32(&mctl_ctl->dfiodtcfg, 1 << 3);
+	clrbits_le32(&mctl_ctl->dfiodtcfg1, 0x1f);
+
+	/* Select 16/32-bits mode for MCTL */
+	if (para->bus_width == 16)
+		setbits_le32(&mctl_ctl->ppcfg, 1);
+
+	/* Set DFI timing registers */
+	writel(MCTL_TCWL, &mctl_ctl->dfitphywrl);
+	writel(MCTL_TCL - 1, &mctl_ctl->dfitrdden);
+	writel(MCTL_DFITPHYRDL, &mctl_ctl->dfitphyrdl);
+	writel(MCTL_DFISTCFG0, &mctl_ctl->dfistcfg0);
+
+	writel(MCTL_MCFG_DDR3, &mctl_ctl->mcfg);
+
+	/* DFI update configuration register */
+	writel(MCTL_DFIUPDCFG_UPD, &mctl_ctl->dfiupdcfg);
+
+	/* Move to access state */
+	writel(MCTL_SCTL_ACCESS, &mctl_ctl->sctl);
+	mctl_await_completion(&mctl_ctl->sstat, 0x07, 0x03);
+}
+
+static void mctl_com_init(struct dram_sun6i_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy1 =
+		(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+	struct sunxi_prcm_reg * const prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+	writel(MCTL_CR_UNKNOWN | MCTL_CR_CHANNEL(para->chan) | MCTL_CR_DDR3 |
+	       ((para->bus_width == 32) ? MCTL_CR_BUSW32 : MCTL_CR_BUSW16) |
+	       MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+	       MCTL_CR_BANK(1) | MCTL_CR_RANK(para->rank), &mctl_com->cr);
+
+	/* Unknown magic performed by boot0 */
+	setbits_le32(&mctl_com->dbgcr, (1 << 6));
+
+	if (para->chan == 1) {
+		/* Shutdown channel 1 */
+		setbits_le32(&mctl_phy1->aciocr, MCTL_ACIOCR_DISABLE);
+		setbits_le32(&mctl_phy1->dxccr, MCTL_DXCCR_DISABLE);
+		clrbits_le32(&mctl_phy1->dsgcr, MCTL_DSGCR_ENABLE);
+		/*
+		 * CH0 ?? this is what boot0 does. Leave as is until we can
+		 * confirm this.
+		 */
+		setbits_le32(&prcm->vdd_sys_pwroff,
+			     PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF);
+	}
+}
+
+static void mctl_port_cfg(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* enable DRAM AXI clock for CPU access */
+	setbits_le32(&ccm->axi_gate, 1 << AXI_GATE_OFFSET_DRAM);
+
+	/* Bunch of magic writes performed by boot0 */
+	writel(0x00400302, &mctl_com->rmcr[0]);
+	writel(0x01000307, &mctl_com->rmcr[1]);
+	writel(0x00400302, &mctl_com->rmcr[2]);
+	writel(0x01000307, &mctl_com->rmcr[3]);
+	writel(0x01000307, &mctl_com->rmcr[4]);
+	writel(0x01000303, &mctl_com->rmcr[6]);
+	writel(0x01000303, &mctl_com->mmcr[0]);
+	writel(0x00400310, &mctl_com->mmcr[1]);
+	writel(0x01000307, &mctl_com->mmcr[2]);
+	writel(0x01000303, &mctl_com->mmcr[3]);
+	writel(0x01800303, &mctl_com->mmcr[4]);
+	writel(0x01800303, &mctl_com->mmcr[5]);
+	writel(0x01800303, &mctl_com->mmcr[6]);
+	writel(0x01800303, &mctl_com->mmcr[7]);
+	writel(0x01000303, &mctl_com->mmcr[8]);
+	writel(0x00000002, &mctl_com->mmcr[15]);
+	writel(0x00000310, &mctl_com->mbagcr[0]);
+	writel(0x00400310, &mctl_com->mbagcr[1]);
+	writel(0x00400310, &mctl_com->mbagcr[2]);
+	writel(0x00000307, &mctl_com->mbagcr[3]);
+	writel(0x00000317, &mctl_com->mbagcr[4]);
+	writel(0x00000307, &mctl_com->mbagcr[5]);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	u32 offset;
+	int bank, bus, columns;
+
+	/* Set initial parameters, these get modified by the autodetect code */
+	struct dram_sun6i_para para = {
+		.bus_width = 32,
+		.chan = 2,
+		.rank = 2,
+		.page_size = 4096,
+		.rows = 16,
+	};
+
+	/* A31s only has one channel */
+	if (sunxi_get_ss_bonding_id() == SUNXI_SS_BOND_ID_A31S)
+		para.chan = 1;
+
+	mctl_sys_init();
+
+	mctl_dll_init(0, &para);
+	setbits_le32(&mctl_com->ccr, MCTL_CCR_CH0_CLK_EN);
+
+	if (para.chan == 2) {
+		mctl_dll_init(1, &para);
+		setbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN);
+	}
+
+	setbits_le32(&mctl_com->ccr, MCTL_CCR_MASTER_CLK_EN);
+
+	mctl_channel_init(0, &para);
+	if (para.chan == 2)
+		mctl_channel_init(1, &para);
+
+	mctl_com_init(&para);
+	mctl_port_cfg();
+
+	/*
+	 * Change to 1 ch / sequence / 8192 byte pages / 16 rows /
+	 * 8 bit banks / 1 rank mode.
+	 */
+	clrsetbits_le32(&mctl_com->cr,
+		MCTL_CR_CHANNEL_MASK | MCTL_CR_PAGE_SIZE_MASK |
+		    MCTL_CR_ROW_MASK | MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK,
+		MCTL_CR_CHANNEL(1) | MCTL_CR_SEQUENCE |
+		    MCTL_CR_PAGE_SIZE(8192) | MCTL_CR_ROW(16) |
+		    MCTL_CR_BANK(1) | MCTL_CR_RANK(1));
+
+	/* Detect and set page size */
+	for (columns = 7; columns < 20; columns++) {
+		if (mctl_mem_matches(1 << columns))
+			break;
+	}
+	bus = (para.bus_width == 32) ? 2 : 1;
+	columns -= bus;
+	para.page_size = (1 << columns) * (bus << 1);
+	clrsetbits_le32(&mctl_com->cr, MCTL_CR_PAGE_SIZE_MASK,
+			MCTL_CR_PAGE_SIZE(para.page_size));
+
+	/* Detect and set rows */
+	for (para.rows = 11; para.rows < 16; para.rows++) {
+		offset = 1 << (para.rows + columns + bus);
+		if (mctl_mem_matches(offset))
+			break;
+	}
+	clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK,
+			MCTL_CR_ROW(para.rows));
+
+	/* Detect bank size */
+	offset = 1 << (para.rows + columns + bus + 2);
+	bank = mctl_mem_matches(offset) ? 0 : 1;
+
+	/* Restore interleave, chan and rank values, set bank size */
+	clrsetbits_le32(&mctl_com->cr,
+			MCTL_CR_CHANNEL_MASK | MCTL_CR_SEQUENCE |
+			    MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK,
+			MCTL_CR_CHANNEL(para.chan) | MCTL_CR_BANK(bank) |
+			    MCTL_CR_RANK(para.rank));
+
+	return 1 << (para.rank + para.rows + bank + columns + para.chan + bus);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a23.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a23.c
new file mode 100644
index 000000000..3ed97b59a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a23.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Sun8i platform dram controller init.
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ */
+
+/*
+ * Note this code uses a lot of magic hex values, that is because this code
+ * simply replays the init sequence as done by the Allwinner boot0 code, so
+ * we do not know what these values mean. There are no symbolic constants for
+ * these magic values, since we do not know how to name them and making up
+ * names for them is not useful.
+ *
+ * The register-layout of the sunxi_mctl_phy_reg-s looks a lot like the one
+ * found in the TI Keystone2 documentation:
+ * http://www.ti.com/lit/ug/spruhn7a/spruhn7a.pdf
+ * "Table4-2 DDR3 PHY Registers"
+ * This may be used as a (possible) reference for future work / cleanups.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+#include <linux/delay.h>
+
+static const struct dram_para dram_para = {
+	.clock = CONFIG_DRAM_CLK,
+	.type = 3,
+	.zq = CONFIG_DRAM_ZQ,
+	.odt_en = IS_ENABLED(CONFIG_DRAM_ODT_EN),
+	.odt_correction = CONFIG_DRAM_ODT_CORRECTION,
+	.para1 = 0, /* not used (only used when tpr13 bit 31 is set */
+	.para2 = 0, /* not used (only used when tpr13 bit 31 is set */
+	.mr0 = 6736,
+	.mr1 = 4,
+	.mr2 = 16,
+	.mr3 = 0,
+	/* tpr0 - 10 contain timing constants or-ed together in u32 vals */
+	.tpr0 = 0x2ab83def,
+	.tpr1 = 0x18082356,
+	.tpr2 = 0x00034156,
+	.tpr3 = 0x448c5533,
+	.tpr4 = 0x08010d00,
+	.tpr5 = 0x0340b20f,
+	.tpr6 = 0x20d118cc,
+	.tpr7 = 0x14062485,
+	.tpr8 = 0x220d1d52,
+	.tpr9 = 0x1e078c22,
+	.tpr10 = 0x3c,
+	.tpr11 = 0, /* not used */
+	.tpr12 = 0, /* not used */
+	.tpr13 = 0x30000,
+};
+
+static void mctl_sys_init(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* enable pll5, note the divide by 2 is deliberate! */
+	clock_set_pll5(dram_para.clock * 1000000 / 2,
+		       dram_para.tpr13 & 0x40000);
+
+	/* deassert ahb mctl reset */
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+
+	/* enable ahb mctl clock */
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+}
+
+static void mctl_apply_odt_correction(u32 *reg, int correction)
+{
+	int val;
+
+	val = (readl(reg) >> 8) & 0xff;
+	val += correction;
+
+	/* clamp */
+	if (val < 0)
+		val = 0;
+	else if (val > 255)
+		val = 255;
+
+	clrsetbits_le32(reg, 0xff00, val << 8);
+}
+
+static void mctl_init(u32 *bus_width)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+		(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+
+	if (dram_para.tpr13 & 0x20)
+		writel(0x40b, &mctl_phy->dcr);
+	else
+		writel(0x1000040b, &mctl_phy->dcr);
+
+	if (dram_para.clock >= 480)
+		writel(0x5c000, &mctl_phy->dllgcr);
+	else
+		writel(0xdc000, &mctl_phy->dllgcr);
+
+	writel(0x0a003e3f, &mctl_phy->pgcr0);
+	writel(0x03008421, &mctl_phy->pgcr1);
+
+	writel(dram_para.mr0, &mctl_phy->mr0);
+	writel(dram_para.mr1, &mctl_phy->mr1);
+	writel(dram_para.mr2, &mctl_phy->mr2);
+	writel(dram_para.mr3, &mctl_phy->mr3);
+
+	if (!(dram_para.tpr13 & 0x10000)) {
+		clrsetbits_le32(&mctl_phy->dx0gcr, 0x3800, 0x2000);
+		clrsetbits_le32(&mctl_phy->dx1gcr, 0x3800, 0x2000);
+	}
+
+	/*
+	 * All the masking and shifting below converts what I assume are DDR
+	 * timing constants from Allwinner dram_para tpr format to the actual
+	 * timing registers format.
+	 */
+
+	writel((dram_para.tpr0 & 0x000fffff), &mctl_phy->ptr2);
+	writel((dram_para.tpr1 & 0x1fffffff), &mctl_phy->ptr3);
+	writel((dram_para.tpr0 & 0x3ff00000) >> 2 |
+	       (dram_para.tpr2 & 0x0003ffff), &mctl_phy->ptr4);
+
+	writel(dram_para.tpr3, &mctl_phy->dtpr0);
+	writel(dram_para.tpr4, &mctl_phy->dtpr2);
+
+	writel(0x01000081, &mctl_phy->dtcr);
+
+	if (dram_para.clock <= 240 || !dram_para.odt_en) {
+		clrbits_le32(&mctl_phy->dx0gcr, 0x600);
+		clrbits_le32(&mctl_phy->dx1gcr, 0x600);
+	}
+	if (dram_para.clock <= 240) {
+		writel(0, &mctl_phy->odtcr);
+		writel(0, &mctl_ctl->odtmap);
+	}
+
+	writel(((dram_para.tpr5 & 0x0f00) << 12) |
+	       ((dram_para.tpr5 & 0x00f8) <<  9) |
+	       ((dram_para.tpr5 & 0x0007) <<  8),
+	       &mctl_ctl->rfshctl0);
+
+	writel(((dram_para.tpr5 & 0x0003f000) << 12) |
+	       ((dram_para.tpr5 & 0x00fc0000) >>  2) |
+	       ((dram_para.tpr5 & 0x3f000000) >> 16) |
+	       ((dram_para.tpr6 & 0x0000003f) >>  0),
+	       &mctl_ctl->dramtmg0);
+
+	writel(((dram_para.tpr6 & 0x000007c0) << 10) |
+	       ((dram_para.tpr6 & 0x0000f800) >> 3) |
+	       ((dram_para.tpr6 & 0x003f0000) >> 16),
+	       &mctl_ctl->dramtmg1);
+
+	writel(((dram_para.tpr6 & 0x0fc00000) << 2) |
+	       ((dram_para.tpr7 & 0x0000001f) << 16) |
+	       ((dram_para.tpr7 & 0x000003e0) << 3) |
+	       ((dram_para.tpr7 & 0x0000fc00) >> 10),
+	       &mctl_ctl->dramtmg2);
+
+	writel(((dram_para.tpr7 & 0x03ff0000) >> 16) |
+	       ((dram_para.tpr6 & 0xf0000000) >> 16),
+	       &mctl_ctl->dramtmg3);
+
+	writel(((dram_para.tpr7 & 0x3c000000) >> 2 ) |
+	       ((dram_para.tpr8 & 0x00000007) << 16) |
+	       ((dram_para.tpr8 & 0x00000038) << 5) |
+	       ((dram_para.tpr8 & 0x000003c0) >> 6),
+	       &mctl_ctl->dramtmg4);
+
+	writel(((dram_para.tpr8 & 0x00003c00) << 14) |
+	       ((dram_para.tpr8 & 0x0003c000) <<  2) |
+	       ((dram_para.tpr8 & 0x00fc0000) >> 10) |
+	       ((dram_para.tpr8 & 0x0f000000) >> 24),
+	       &mctl_ctl->dramtmg5);
+
+	writel(0x00000008, &mctl_ctl->dramtmg8);
+
+	writel(((dram_para.tpr8 & 0xf0000000) >> 4) |
+	       ((dram_para.tpr9 & 0x00007c00) << 6) |
+	       ((dram_para.tpr9 & 0x000003e0) << 3) |
+	       ((dram_para.tpr9 & 0x0000001f) >> 0),
+	       &mctl_ctl->pitmg0);
+
+	setbits_le32(&mctl_ctl->pitmg1, 0x80000);
+
+	writel(((dram_para.tpr9 & 0x003f8000) << 9) | 0x2001,
+	       &mctl_ctl->sched);
+
+	writel((dram_para.mr0 << 16) | dram_para.mr1, &mctl_ctl->init3);
+	writel((dram_para.mr2 << 16) | dram_para.mr3, &mctl_ctl->init4);
+
+	writel(0x00000000, &mctl_ctl->pimisc);
+	writel(0x80000000, &mctl_ctl->upd0);
+
+	writel(((dram_para.tpr9  & 0xffc00000) >> 22) |
+	       ((dram_para.tpr10 & 0x00000fff) << 16),
+	       &mctl_ctl->rfshtmg);
+
+	if (dram_para.tpr13 & 0x20)
+		writel(0x01040001, &mctl_ctl->mstr);
+	else
+		writel(0x01040401, &mctl_ctl->mstr);
+
+	if (!(dram_para.tpr13 & 0x20000)) {
+		writel(0x00000002, &mctl_ctl->pwrctl);
+		writel(0x00008001, &mctl_ctl->pwrtmg);
+	}
+
+	writel(0x00000001, &mctl_ctl->rfshctl3);
+	writel(0x00000001, &mctl_ctl->pimisc);
+
+	/* deassert dram_clk_cfg reset */
+	setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
+
+	setbits_le32(&mctl_com->ccr, 0x80000);
+
+	/* zq stuff */
+	writel((dram_para.zq >> 8) & 0xff, &mctl_phy->zqcr1);
+
+	writel(0x00000003, &mctl_phy->pir);
+	udelay(10);
+	mctl_await_completion(&mctl_phy->pgsr0, 0x09, 0x09);
+
+	writel(readl(&mctl_phy->zqsr0) | 0x10000000, &mctl_phy->zqcr2);
+	writel(dram_para.zq & 0xff, &mctl_phy->zqcr1);
+
+	/* A23-v1.0 SDK uses 0xfdf3, A23-v2.0 SDK uses 0x5f3 */
+	writel(0x000005f3, &mctl_phy->pir);
+	udelay(10);
+	mctl_await_completion(&mctl_phy->pgsr0, 0x03, 0x03);
+
+	if (readl(&mctl_phy->dx1gsr0) & 0x1000000) {
+		*bus_width = 8;
+		writel(0, &mctl_phy->dx1gcr);
+		writel(dram_para.zq & 0xff, &mctl_phy->zqcr1);
+		writel(0x5f3, &mctl_phy->pir);
+		udelay(10000);
+		setbits_le32(&mctl_ctl->mstr, 0x1000);
+	} else
+		*bus_width = 16;
+
+	if (dram_para.odt_correction) {
+		mctl_apply_odt_correction(&mctl_phy->dx0lcdlr1,
+					  dram_para.odt_correction);
+		mctl_apply_odt_correction(&mctl_phy->dx1lcdlr1,
+					  dram_para.odt_correction);
+	}
+
+	mctl_await_completion(&mctl_ctl->statr, 0x01, 0x01);
+
+	writel(0x08003e3f, &mctl_phy->pgcr0);
+	writel(0x00000000, &mctl_ctl->rfshctl3);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	const u32 columns = 13;
+	u32 bus, bus_width, offset, page_size, rows;
+
+	mctl_sys_init();
+	mctl_init(&bus_width);
+
+	if (bus_width == 16) {
+		page_size = 8;
+		bus = 1;
+	} else {
+		page_size = 7;
+		bus = 0;
+	}
+
+	if (!(dram_para.tpr13 & 0x80000000)) {
+		/* Detect and set rows */
+		writel(0x000310f4 | MCTL_CR_PAGE_SIZE(page_size),
+		       &mctl_com->cr);
+		setbits_le32(&mctl_com->swonr, 0x0003ffff);
+		for (rows = 11; rows < 16; rows++) {
+			offset = 1 << (rows + columns + bus);
+			if (mctl_mem_matches(offset))
+				break;
+		}
+		clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK,
+				MCTL_CR_ROW(rows));
+	} else {
+		rows = (dram_para.para1 >> 16) & 0xff;
+		writel(((dram_para.para2 & 0x000000f0) << 11) |
+		       ((rows - 1) << 4) |
+		       ((dram_para.para1 & 0x0f000000) >> 22) |
+		       0x31000 | MCTL_CR_PAGE_SIZE(page_size),
+		       &mctl_com->cr);
+		setbits_le32(&mctl_com->swonr, 0x0003ffff);
+	}
+
+	/* Setup DRAM master priority? If this is left out things still work */
+	writel(0x00000008, &mctl_com->mcr0_0);
+	writel(0x0001000d, &mctl_com->mcr1_0);
+	writel(0x00000004, &mctl_com->mcr0_1);
+	writel(0x00000080, &mctl_com->mcr1_1);
+	writel(0x00000004, &mctl_com->mcr0_2);
+	writel(0x00000019, &mctl_com->mcr1_2);
+	writel(0x00000004, &mctl_com->mcr0_3);
+	writel(0x00000080, &mctl_com->mcr1_3);
+	writel(0x00000004, &mctl_com->mcr0_4);
+	writel(0x01010040, &mctl_com->mcr1_4);
+	writel(0x00000004, &mctl_com->mcr0_5);
+	writel(0x0001002f, &mctl_com->mcr1_5);
+	writel(0x00000004, &mctl_com->mcr0_6);
+	writel(0x00010020, &mctl_com->mcr1_6);
+	writel(0x00000004, &mctl_com->mcr0_7);
+	writel(0x00010020, &mctl_com->mcr1_7);
+	writel(0x00000008, &mctl_com->mcr0_8);
+	writel(0x00000001, &mctl_com->mcr1_8);
+	writel(0x00000008, &mctl_com->mcr0_9);
+	writel(0x00000005, &mctl_com->mcr1_9);
+	writel(0x00000008, &mctl_com->mcr0_10);
+	writel(0x00000003, &mctl_com->mcr1_10);
+	writel(0x00000008, &mctl_com->mcr0_11);
+	writel(0x00000005, &mctl_com->mcr1_11);
+	writel(0x00000008, &mctl_com->mcr0_12);
+	writel(0x00000003, &mctl_com->mcr1_12);
+	writel(0x00000008, &mctl_com->mcr0_13);
+	writel(0x00000004, &mctl_com->mcr1_13);
+	writel(0x00000008, &mctl_com->mcr0_14);
+	writel(0x00000002, &mctl_com->mcr1_14);
+	writel(0x00000008, &mctl_com->mcr0_15);
+	writel(0x00000003, &mctl_com->mcr1_15);
+	writel(0x00010138, &mctl_com->bwcr);
+
+	return 1 << (rows + columns + bus);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a33.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a33.c
new file mode 100644
index 000000000..d99a38b10
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a33.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Sun8i a33 platform dram controller init.
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015      Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2015      Hans de Goede <hdegoede@redhat.com>
+ */
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+#include <linux/delay.h>
+
+/* PLL runs at 2x dram-clk, controller runs at PLL / 4 (dram-clk / 2) */
+#define DRAM_CLK_MUL 2
+#define DRAM_CLK_DIV 4
+#define DRAM_SIGMA_DELTA_ENABLE 1
+
+struct dram_para {
+	u8 cs1;
+	u8 seq;
+	u8 bank;
+	u8 rank;
+	u8 rows;
+	u8 bus_width;
+	u16 page_size;
+};
+
+static void mctl_set_cr(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN |
+	       MCTL_CR_CHANNEL(1) | MCTL_CR_DDR3 |
+	       (para->seq ? MCTL_CR_SEQUENCE : 0) |
+	       ((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) |
+	       MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+	       MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank),
+	       &mctl_com->cr);
+}
+
+static void auto_detect_dram_size(struct dram_para *para)
+{
+	u8 orig_rank = para->rank;
+	int rows, columns;
+
+	/* Row detect */
+	para->page_size = 512;
+	para->seq = 1;
+	para->rows = 16;
+	para->rank = 1;
+	mctl_set_cr(para);
+	for (rows = 11 ; rows < 16 ; rows++) {
+		if (mctl_mem_matches(1 << (rows + 9))) /* row-column */
+			break;
+	}
+
+	/* Column (page size) detect */
+	para->rows = 11;
+	para->page_size = 8192;
+	mctl_set_cr(para);
+	for (columns = 9 ; columns < 13 ; columns++) {
+		if (mctl_mem_matches(1 << columns))
+			break;
+	}
+
+	para->seq = 0;
+	para->rank = orig_rank;
+	para->rows = rows;
+	para->page_size = 1 << columns;
+	mctl_set_cr(para);
+}
+
+static inline int ns_to_t(int nanoseconds)
+{
+	const unsigned int ctrl_freq =
+		CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV;
+
+	return (ctrl_freq * nanoseconds + 999) / 1000;
+}
+
+static void auto_set_timing_para(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	u32 reg_val;
+
+	u8 tccd		= 2;
+	u8 tfaw		= ns_to_t(50);
+	u8 trrd		= max(ns_to_t(10), 4);
+	u8 trcd		= ns_to_t(15);
+	u8 trc		= ns_to_t(53);
+	u8 txp		= max(ns_to_t(8), 3);
+	u8 twtr		= max(ns_to_t(8), 4);
+	u8 trtp		= max(ns_to_t(8), 4);
+	u8 twr		= max(ns_to_t(15), 3);
+	u8 trp		= ns_to_t(15);
+	u8 tras		= ns_to_t(38);
+
+	u16 trefi	= ns_to_t(7800) / 32;
+	u16 trfc	= ns_to_t(350);
+
+	/* Fixed timing parameters */
+	u8 tmrw		= 0;
+	u8 tmrd		= 4;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 4;
+	u8 trasmax	= 24;
+	u8 tcl		= 6; /* CL 12 */
+	u8 tcwl		= 4; /* CWL 8 */
+	u8 t_rdata_en	= 4;
+	u8 wr_latency	= 2;
+
+	u32 tdinit0	= (500 * CONFIG_DRAM_CLK) + 1;		/* 500us */
+	u32 tdinit1	= (360 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 360ns */
+	u32 tdinit2	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 2 + twr;	/* WL + BL / 2 + tWR */
+	u8 twr2rd	= tcwl + 2 + twtr; 	/* WL + BL / 2 + tWTR */
+	u8 trd2wr	= tcl + 2 + 1 - tcwl; 	/* RL + BL / 2 + 2 - WL */
+
+	/* Set work mode register */
+	mctl_set_cr(para);
+	/* Set mode register */
+	writel(MCTL_MR0, &mctl_ctl->mr0);
+	writel(MCTL_MR1, &mctl_ctl->mr1);
+	writel(MCTL_MR2, &mctl_ctl->mr2);
+	writel(MCTL_MR3, &mctl_ctl->mr3);
+	/* Set dram timing */
+	reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
+	writel(reg_val, &mctl_ctl->dramtmg0);
+	reg_val = (txp << 16) | (trtp << 8) | (trc << 0);
+	writel(reg_val, &mctl_ctl->dramtmg1);
+	reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0);
+	writel(reg_val, &mctl_ctl->dramtmg2);
+	reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0);
+	writel(reg_val, &mctl_ctl->dramtmg3);
+	reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0);
+	writel(reg_val, &mctl_ctl->dramtmg4);
+	reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
+	writel(reg_val, &mctl_ctl->dramtmg5);
+	/* Set two rank timing and exit self-refresh timing */
+	reg_val = readl(&mctl_ctl->dramtmg8);
+	reg_val &= ~(0xff << 8);
+	reg_val &= ~(0xff << 0);
+	reg_val |= (0x33 << 8);
+	reg_val |= (0x10 << 0);
+	writel(reg_val, &mctl_ctl->dramtmg8);
+	/* Set phy interface time */
+	reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
+			| (wr_latency << 0);
+	/* PHY interface write latency and read latency configure */
+	writel(reg_val, &mctl_ctl->pitmg0);
+	/* Set phy time  PTR0-2 use default */
+	writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3);
+	writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4);
+	/* Set refresh timing */
+	reg_val = (trefi << 16) | (trfc << 0);
+	writel(reg_val, &mctl_ctl->rfshtmg);
+}
+
+static void mctl_set_pir(u32 val)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	writel(val, &mctl_ctl->pir);
+	mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1);
+}
+
+static void mctl_data_train_cfg(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	if (para->rank == 2)
+		clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24);
+	else
+		clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24);
+}
+
+static int mctl_train_dram(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	mctl_data_train_cfg(para);
+	mctl_set_pir(0x5f3);
+
+	return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0;
+}
+
+static int mctl_channel_init(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	u32 low_data_lines_status;  /* Training status of datalines 0 - 7 */
+	u32 high_data_lines_status; /* Training status of datalines 8 - 15 */
+
+	auto_set_timing_para(para);
+
+	/* Disable dram VTC */
+	clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0);
+
+	/* Set ODT */
+	if ((CONFIG_DRAM_CLK > 400) && IS_ENABLED(CONFIG_DRAM_ODT_EN)) {
+		setbits_le32(DXnGCR0(0), 0x3 << 9);
+		setbits_le32(DXnGCR0(1), 0x3 << 9);
+	} else {
+		clrbits_le32(DXnGCR0(0), 0x3 << 9);
+		clrbits_le32(DXnGCR0(1), 0x3 << 9);
+	}
+
+	/* set PLL configuration */
+	if (CONFIG_DRAM_CLK >= 480)
+		setbits_le32(&mctl_ctl->pllgcr, 0x1 << 18);
+	else
+		setbits_le32(&mctl_ctl->pllgcr, 0x3 << 18);
+
+	/* Auto detect dram config, set 2 rank and 16bit bus-width */
+	para->cs1 = 0;
+	para->rank = 2;
+	para->bus_width = 16;
+	mctl_set_cr(para);
+
+	/* Open DQS gating */
+	clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
+	clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
+
+	mctl_data_train_cfg(para);
+
+	/* ZQ calibration */
+	writel(CONFIG_DRAM_ZQ & 0xff, &mctl_ctl->zqcr1);
+	/* CA calibration */
+	mctl_set_pir(0x00000003);
+	/* More ZQ calibration */
+	writel(readl(&mctl_ctl->zqsr0) | 0x10000000, &mctl_ctl->zqcr2);
+	writel((CONFIG_DRAM_ZQ >> 8) & 0xff, &mctl_ctl->zqcr1);
+
+	/* DQS gate training */
+	if (mctl_train_dram(para) != 0) {
+		low_data_lines_status  = (readl(DXnGSR0(0)) >> 24) & 0x03;
+		high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03;
+
+		if (low_data_lines_status == 0x3)
+			return -EIO;
+
+		/* DRAM has only one rank */
+		para->rank = 1;
+		mctl_set_cr(para);
+
+		if (low_data_lines_status == high_data_lines_status)
+			goto done; /* 16 bit bus, 1 rank */
+
+		if (!(low_data_lines_status & high_data_lines_status)) {
+			/* Retry 16 bit bus-width with CS1 set */
+			para->cs1 = 1;
+			mctl_set_cr(para);
+			if (mctl_train_dram(para) == 0)
+				goto done;
+		}
+
+		/* Try 8 bit bus-width */
+		writel(0x0, DXnGCR0(1)); /* Disable high DQ */
+		para->cs1 = 0;
+		para->bus_width = 8;
+		mctl_set_cr(para);
+		if (mctl_train_dram(para) != 0)
+			return -EIO;
+	}
+done:
+	/* Check the dramc status */
+	mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
+
+	/* Close DQS gating */
+	setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6);
+
+	/* Enable master access */
+	writel(0xffffffff, &mctl_com->maer);
+
+	return 0;
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+	struct sunxi_ccm_reg * const ccm =
+			(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	clrsetbits_le32(&ccm->dram_pll_cfg, CCM_DRAMPLL_CFG_SRC_MASK,
+			CCM_DRAMPLL_CFG_SRC_PLL11);
+
+	clock_set_pll11(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL,
+			DRAM_SIGMA_DELTA_ENABLE);
+
+	clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK,
+			CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) |
+			CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD);
+	mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+	setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+	setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
+
+	/* Set dram master access priority */
+	writel(0x0, &mctl_com->mapr);
+	writel(0x0f802f01, &mctl_ctl->sched);
+	writel(0x0000400f, &mctl_ctl->clken);	/* normal */
+
+	udelay(250);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	struct dram_para para = {
+		.cs1 = 0,
+		.bank = 1,
+		.rank = 2,
+		.rows = 15,
+		.bus_width = 16,
+		.page_size = 2048,
+	};
+
+	mctl_sys_init(&para);
+
+	if (mctl_channel_init(&para) != 0)
+		return 0;
+
+	auto_detect_dram_size(&para);
+
+	/* Enable master software clk */
+	writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr);
+
+	/* Set DRAM ODT MAP */
+	if (para.rank == 2)
+		writel(0x00000303, &mctl_ctl->odtmap);
+	else
+		writel(0x00000201, &mctl_ctl->odtmap);
+
+	return para.page_size * (para.bus_width / 8) *
+		(1 << (para.bank + para.rank + para.rows));
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a83t.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a83t.c
new file mode 100644
index 000000000..a3f833dd3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sun8i_a83t.c
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Sun8i a33 platform dram controller init.
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015      Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2015      Hans de Goede <hdegoede@redhat.com>
+ */
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+#include <linux/delay.h>
+
+#define DRAM_CLK_MUL 2
+#define DRAM_CLK_DIV 1
+
+struct dram_para {
+	u8 cs1;
+	u8 seq;
+	u8 bank;
+	u8 rank;
+	u8 rows;
+	u8 bus_width;
+	u8 dram_type;
+	u16 page_size;
+};
+
+static void mctl_set_cr(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN |
+		MCTL_CR_CHANNEL(1) | MCTL_CR_DRAM_TYPE(para->dram_type) |
+		(para->seq ? MCTL_CR_SEQUENCE : 0) |
+		((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) |
+		MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+		MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank),
+		&mctl_com->cr);
+}
+
+static void auto_detect_dram_size(struct dram_para *para)
+{
+	u8 orig_rank = para->rank;
+	int rows, columns;
+
+	/* Row detect */
+	para->page_size = 512;
+	para->seq = 1;
+	para->rows = 16;
+	para->rank = 1;
+	mctl_set_cr(para);
+	for (rows = 11 ; rows < 16 ; rows++) {
+		if (mctl_mem_matches(1 << (rows + 9))) /* row-column */
+			break;
+	}
+
+	/* Column (page size) detect */
+	para->rows = 11;
+	para->page_size = 8192;
+	mctl_set_cr(para);
+	for (columns = 9 ; columns < 13 ; columns++) {
+		if (mctl_mem_matches(1 << columns))
+			break;
+	}
+
+	para->seq = 0;
+	para->rank = orig_rank;
+	para->rows = rows;
+	para->page_size = 1 << columns;
+	mctl_set_cr(para);
+}
+
+static inline int ns_to_t(int nanoseconds)
+{
+	const unsigned int ctrl_freq =
+		CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV;
+
+	return (ctrl_freq * nanoseconds + 999) / 1000;
+}
+
+static void auto_set_timing_para(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	u32 reg_val;
+
+	u8 tccd		= 2;
+	u8 tfaw		= ns_to_t(50);
+	u8 trrd		= max(ns_to_t(10), 4);
+	u8 trcd		= ns_to_t(15);
+	u8 trc		= ns_to_t(53);
+	u8 txp		= max(ns_to_t(8), 3);
+	u8 twtr		= max(ns_to_t(8), 4);
+	u8 trtp		= max(ns_to_t(8), 4);
+	u8 twr		= max(ns_to_t(15), 3);
+	u8 trp		= ns_to_t(15);
+	u8 tras		= ns_to_t(38);
+
+	u16 trefi	= ns_to_t(7800) / 32;
+	u16 trfc	= ns_to_t(350);
+
+	/* Fixed timing parameters */
+	u8 tmrw		= 0;
+	u8 tmrd		= 4;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 4;
+	u8 trasmax	= 24;
+	u8 tcl		= 6; /* CL 12 */
+	u8 tcwl		= 4; /* CWL 8 */
+	u8 t_rdata_en	= 4;
+	u8 wr_latency	= 2;
+
+	u32 tdinit0	= (500 * CONFIG_DRAM_CLK) + 1;		/* 500us */
+	u32 tdinit1	= (360 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 360ns */
+	u32 tdinit2	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 2 + twr;	/* WL + BL / 2 + tWR */
+	u8 twr2rd	= tcwl + 2 + twtr;	/* WL + BL / 2 + tWTR */
+	u8 trd2wr	= tcl + 2 + 1 - tcwl;	/* RL + BL / 2 + 2 - WL */
+
+	/* Set work mode register */
+	mctl_set_cr(para);
+	/* Set mode register */
+	if (para->dram_type == DRAM_TYPE_DDR3) {
+		writel(MCTL_MR0, &mctl_ctl->mr0);
+		writel(MCTL_MR1, &mctl_ctl->mr1);
+		writel(MCTL_MR2, &mctl_ctl->mr2);
+		writel(MCTL_MR3, &mctl_ctl->mr3);
+	} else if (para->dram_type == DRAM_TYPE_LPDDR3) {
+		writel(MCTL_LPDDR3_MR0, &mctl_ctl->mr0);
+		writel(MCTL_LPDDR3_MR1, &mctl_ctl->mr1);
+		writel(MCTL_LPDDR3_MR2, &mctl_ctl->mr2);
+		writel(MCTL_LPDDR3_MR3, &mctl_ctl->mr3);
+
+		/* timing parameters for LPDDR3 */
+		tfaw = max(ns_to_t(50), 4);
+		trrd = max(ns_to_t(10), 2);
+		trcd = max(ns_to_t(24), 2);
+		trc = ns_to_t(70);
+		txp = max(ns_to_t(8), 2);
+		twtr = max(ns_to_t(8), 2);
+		trtp = max(ns_to_t(8), 2);
+		trp = max(ns_to_t(27), 2);
+		tras = ns_to_t(42);
+		trefi = ns_to_t(3900) / 32;
+		trfc = ns_to_t(210);
+		tmrw		= 5;
+		tmrd		= 5;
+		tckesr		= 5;
+		tcwl		= 3;	/* CWL 8 */
+		t_rdata_en	= 5;
+		tdinit0	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+		tdinit1	= (100 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 100ns */
+		tdinit2	= (11 * CONFIG_DRAM_CLK) + 1;	/* 200us */
+		tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;	/* 1us */
+		twtp	= tcwl + 4 + twr + 1;	/* CWL + BL/2 + tWR */
+		twr2rd	= tcwl + 4 + 1 + twtr;	/* WL + BL / 2 + tWTR */
+		trd2wr	= tcl + 4 + 5 - tcwl + 1; /* RL + BL / 2 + 2 - WL */
+	}
+	/* Set dram timing */
+	reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
+	writel(reg_val, &mctl_ctl->dramtmg0);
+	reg_val = (txp << 16) | (trtp << 8) | (trc << 0);
+	writel(reg_val, &mctl_ctl->dramtmg1);
+	reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0);
+	writel(reg_val, &mctl_ctl->dramtmg2);
+	reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0);
+	writel(reg_val, &mctl_ctl->dramtmg3);
+	reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0);
+	writel(reg_val, &mctl_ctl->dramtmg4);
+	reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
+	writel(reg_val, &mctl_ctl->dramtmg5);
+	/* Set two rank timing and exit self-refresh timing */
+	reg_val = readl(&mctl_ctl->dramtmg8);
+	reg_val &= ~(0xff << 8);
+	reg_val &= ~(0xff << 0);
+	reg_val |= (0x33 << 8);
+	reg_val |= (0x8 << 0);
+	writel(reg_val, &mctl_ctl->dramtmg8);
+	/* Set phy interface time */
+	reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
+			| (wr_latency << 0);
+	/* PHY interface write latency and read latency configure */
+	writel(reg_val, &mctl_ctl->pitmg0);
+	/* Set phy time  PTR0-2 use default */
+	writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3);
+	writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4);
+	/* Set refresh timing */
+	reg_val = (trefi << 16) | (trfc << 0);
+	writel(reg_val, &mctl_ctl->rfshtmg);
+}
+
+static void mctl_set_pir(u32 val)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	writel(val, &mctl_ctl->pir);
+	mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1);
+}
+
+static void mctl_data_train_cfg(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	if (para->rank == 2)
+		clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24);
+	else
+		clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24);
+}
+
+static int mctl_train_dram(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	mctl_data_train_cfg(para);
+	mctl_set_pir(0x5f3);
+
+	return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0;
+}
+
+static void set_master_priority(void)
+{
+	writel(0x00a0000d, MCTL_MASTER_CFG0(0));
+	writel(0x00500064, MCTL_MASTER_CFG1(0));
+	writel(0x07000009, MCTL_MASTER_CFG0(1));
+	writel(0x00000600, MCTL_MASTER_CFG1(1));
+	writel(0x01000009, MCTL_MASTER_CFG0(3));
+	writel(0x00000064, MCTL_MASTER_CFG1(3));
+	writel(0x08000009, MCTL_MASTER_CFG0(4));
+	writel(0x00000640, MCTL_MASTER_CFG1(4));
+	writel(0x20000308, MCTL_MASTER_CFG0(8));
+	writel(0x00001000, MCTL_MASTER_CFG1(8));
+	writel(0x02800009, MCTL_MASTER_CFG0(9));
+	writel(0x00000100, MCTL_MASTER_CFG1(9));
+	writel(0x01800009, MCTL_MASTER_CFG0(5));
+	writel(0x00000100, MCTL_MASTER_CFG1(5));
+	writel(0x01800009, MCTL_MASTER_CFG0(7));
+	writel(0x00000100, MCTL_MASTER_CFG1(7));
+	writel(0x00640009, MCTL_MASTER_CFG0(6));
+	writel(0x00000032, MCTL_MASTER_CFG1(6));
+	writel(0x0100000d, MCTL_MASTER_CFG0(2));
+	writel(0x00500080, MCTL_MASTER_CFG1(2));
+}
+
+static int mctl_channel_init(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	u32 low_data_lines_status;  /* Training status of datalines 0 - 7 */
+	u32 high_data_lines_status; /* Training status of datalines 8 - 15 */
+	u32 i, rval;
+
+	auto_set_timing_para(para);
+
+	/* Set dram master access priority */
+	writel(0x000101a0, &mctl_com->bwcr);
+	/* set cpu high priority */
+	writel(0x1, &mctl_com->mapr);
+	set_master_priority();
+	udelay(250);
+
+	/* Disable dram VTC */
+	clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0 | 0x1 << 30);
+	clrsetbits_le32(&mctl_ctl->pgcr1, 0x1 << 24, 0x1 << 26);
+
+	writel(0x94be6fa3, MCTL_PROTECT);
+	udelay(100);
+	clrsetbits_le32(MX_UPD2, 0xfff << 16, 0x50 << 16);
+	writel(0x0, MCTL_PROTECT);
+	udelay(100);
+
+
+	/* Set ODT */
+	if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
+		rval = 0x0;
+	else
+		rval = 0x2;
+
+	for (i = 0 ; i < 11 ; i++) {
+		clrsetbits_le32(DATX0IOCR(i), (0x3 << 24) | (0x3 << 16),
+				rval << 24);
+		clrsetbits_le32(DATX1IOCR(i), (0x3 << 24) | (0x3 << 16),
+				rval << 24);
+		clrsetbits_le32(DATX2IOCR(i), (0x3 << 24) | (0x3 << 16),
+				rval << 24);
+		clrsetbits_le32(DATX3IOCR(i), (0x3 << 24) | (0x3 << 16),
+				rval << 24);
+	}
+
+	for (i = 0; i < 31; i++)
+		clrsetbits_le32(CAIOCR(i), 0x3 << 26 | 0x3 << 16, 0x2 << 26);
+
+	/* set PLL configuration */
+	if (CONFIG_DRAM_CLK >= 480)
+		setbits_le32(&mctl_ctl->pllgcr, 0x1 << 19);
+	else
+		setbits_le32(&mctl_ctl->pllgcr, 0x3 << 19);
+
+	/* Auto detect dram config, set 2 rank and 16bit bus-width */
+	para->cs1 = 0;
+	para->rank = 2;
+	para->bus_width = 16;
+	mctl_set_cr(para);
+
+	/* Open DQS gating */
+	clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
+	clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
+
+	if (para->dram_type == DRAM_TYPE_LPDDR3)
+		clrsetbits_le32(&mctl_ctl->dxccr, (0x1 << 27) | (0x3<<6) ,
+				0x1 << 31);
+	if (readl(&mctl_com->cr) & 0x1)
+		writel(0x00000303, &mctl_ctl->odtmap);
+	else
+		writel(0x00000201, &mctl_ctl->odtmap);
+
+	mctl_data_train_cfg(para);
+	/* ZQ calibration */
+	clrsetbits_le32(ZQnPR(0), 0x000000ff, CONFIG_DRAM_ZQ & 0xff);
+	clrsetbits_le32(ZQnPR(1), 0x000000ff, (CONFIG_DRAM_ZQ >> 8) & 0xff);
+	/* CA calibration */
+
+	if (para->dram_type == DRAM_TYPE_DDR3)
+		mctl_set_pir(0x0201f3 | 0x1<<10);
+	else
+		mctl_set_pir(0x020173 | 0x1<<10);
+
+	/* DQS gate training */
+	if (mctl_train_dram(para) != 0) {
+		low_data_lines_status  = (readl(DXnGSR0(0)) >> 24) & 0x03;
+		high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03;
+
+		if (low_data_lines_status == 0x3)
+			return -EIO;
+
+		/* DRAM has only one rank */
+		para->rank = 1;
+		mctl_set_cr(para);
+
+		if (low_data_lines_status == high_data_lines_status)
+			goto done; /* 16 bit bus, 1 rank */
+
+		if (!(low_data_lines_status & high_data_lines_status)) {
+			/* Retry 16 bit bus-width with CS1 set */
+			para->cs1 = 1;
+			mctl_set_cr(para);
+			if (mctl_train_dram(para) == 0)
+				goto done;
+		}
+
+		/* Try 8 bit bus-width */
+		writel(0x0, DXnGCR0(1)); /* Disable high DQ */
+		para->cs1 = 0;
+		para->bus_width = 8;
+		mctl_set_cr(para);
+		if (mctl_train_dram(para) != 0)
+			return -EIO;
+	}
+done:
+	/* Check the dramc status */
+	mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
+
+	/* Close DQS gating */
+	setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6);
+
+	/* set PGCR3,CKE polarity */
+	writel(0x00aa0060, &mctl_ctl->pgcr3);
+	/* Enable master access */
+	writel(0xffffffff, &mctl_com->maer);
+
+	return 0;
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+	struct sunxi_ccm_reg * const ccm =
+			(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	clrbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
+	clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+	clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+	clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+	clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+	udelay(1000);
+	clrbits_le32(&ccm->dram_clk_cfg, 0x01<<31);
+
+	clock_set_pll5(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL);
+
+	clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK,
+			CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) |
+			CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD);
+	mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+	setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+	setbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
+
+	para->rank = 2;
+	para->bus_width = 16;
+	mctl_set_cr(para);
+
+	/* Set dram master access priority */
+	writel(0x0000e00f, &mctl_ctl->clken);	/* normal */
+
+	udelay(250);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	struct dram_para para = {
+		.cs1 = 0,
+		.bank = 1,
+		.rank = 1,
+		.rows = 15,
+		.bus_width = 16,
+		.page_size = 2048,
+	};
+
+#if defined(CONFIG_MACH_SUN8I_A83T)
+#if (CONFIG_DRAM_TYPE == 3) || (CONFIG_DRAM_TYPE == 7)
+	para.dram_type = CONFIG_DRAM_TYPE;
+#else
+#error Unsupported DRAM type, Please set DRAM type (3:DDR3, 7:LPDDR3)
+#endif
+#endif
+	setbits_le32(SUNXI_PRCM_BASE + 0x1e0, 0x1 << 8);
+
+	writel(0, (SUNXI_PRCM_BASE + 0x1e8));
+	udelay(10);
+
+	mctl_sys_init(&para);
+
+	if (mctl_channel_init(&para) != 0)
+		return 0;
+
+	auto_detect_dram_size(&para);
+
+	/* Enable master software clk */
+	writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr);
+
+	/* Set DRAM ODT MAP */
+	if (para.rank == 2)
+		writel(0x00000303, &mctl_ctl->odtmap);
+	else
+		writel(0x00000201, &mctl_ctl->odtmap);
+
+	return para.page_size * (para.bus_width / 8) *
+		(1 << (para.bank + para.rank + para.rows));
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sun9i.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sun9i.c
new file mode 100644
index 000000000..14be212e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sun9i.c
@@ -0,0 +1,960 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sun9i dram controller initialisation
+ *
+ * (C) Copyright 2007-2015
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Jerry Wang <wangflord@allwinnertech.com>
+ *
+ * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
+ *                    Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <init.h>
+#include <log.h>
+#include <ram.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/sys_proto.h>
+
+#define DRAM_CLK (CONFIG_DRAM_CLK * 1000000)
+
+/*
+ * The following amounts to an extensive rewrite of the code received from
+ * Allwinner as part of the open-source bootloader release (refer to
+ * https://github.com/allwinner-zh/bootloader.git) and augments the upstream
+ * sources (which act as the primary reference point for the inner workings
+ * of the 'underdocumented' DRAM controller in the A80) using the following
+ * documentation for other memory controllers based on the (Synopsys)
+ * Designware IP (DDR memory protocol controller and DDR PHY)
+ *   * TI Keystone II Architecture: DDR3 Memory Controller, User's Guide
+ *     Document 'SPRUHN7C', Oct 2013 (revised March 2015)
+ *   * Xilinx Zynq UltraScale+ MPSoC Register Reference
+ *     document ug1087 (v1.0)
+ * Note that the Zynq-documentation provides a very close match for the DDR
+ * memory protocol controller (and provides a very good guide to the rounding
+ * rules for various timings), whereas the TI Keystone II document should be
+ * referred to for DDR PHY specifics only.
+ *
+ * The DRAM controller in the A80 runs at half the frequency of the DDR PHY
+ * (i.e. the rules for MEMC_FREQ_RATIO=2 from the Zynq-documentation apply).
+ *
+ * Known limitations
+ * =================
+ * In the current state, the following features are not fully supported and
+ * a number of simplifying assumptions have been made:
+ *   1) Only DDR3 support is implemented, as our test platform (the A80-Q7
+ *      module) is designed to accomodate DDR3/DDR3L.
+ *   2) Only 2T-mode has been implemented and tested.
+ *   3) The controller supports two different clocking strategies (PLL6 can
+ *      either be 2*CK or CK/2)... we only support the 2*CK clock at this
+ *      time and haven't verified whether the alternative clocking strategy
+ *      works.  If you are interested in porting this over/testing this,
+ *      please refer to cases where bit 0 of 'dram_tpr8' is tested in the
+ *      original code from Allwinner.
+ *   4) Support for 2 ranks per controller is not implemented (as we don't
+ *      the hardware to test it).
+ *
+ * Future directions
+ * =================
+ * The driver should be driven from a device-tree based configuration that
+ * can dynamically provide the necessary timing parameters (i.e. target
+ * frequency and speed-bin information)---the data structures used in the
+ * calculation of the timing parameters are already designed to capture
+ * similar information as the device tree would provide.
+ *
+ * To enable a device-tree based configuration of the sun9i platform, we
+ * will need to enable CONFIG_TPL and bootstrap in 3 stages: initially
+ * into SRAM A1 (40KB) and next into SRAM A2 (160KB)---which would be the
+ * stage to initialise the platform via the device-tree---before having
+ * the full U-Boot run from DDR.
+ */
+
+/*
+ * A number of DDR3 timings are given as "the greater of a fixed number of
+ * clock cycles (CK) or nanoseconds.  We express these using a structure
+ * that holds a cycle count and a duration in picoseconds (so we can model
+ * sub-ns timings, such as 7.5ns without losing precision or resorting to
+ * rounding up early.
+ */
+struct dram_sun9i_timing {
+	u32 ck;
+	u32 ps;
+};
+
+/* */
+struct dram_sun9i_cl_cwl_timing {
+	u32 CL;
+	u32 CWL;
+	u32 tCKmin;  /* in ps */
+	u32 tCKmax;  /* in ps */
+};
+
+struct dram_sun9i_para {
+	u32 dram_type;
+
+	u8 bus_width;
+	u8 chan;
+	u8 rank;
+	u8 rows;
+	u16 page_size;
+
+	/* Timing information for each speed-bin */
+	struct dram_sun9i_cl_cwl_timing *cl_cwl_table;
+	u32 cl_cwl_numentries;
+
+	/*
+	 * For the timings, we try to keep the order and grouping used in
+	 * JEDEC Standard No. 79-3F
+	 */
+
+	/* timings */
+	u32 tREFI; /* in ns */
+	u32 tRFC;  /* in ns */
+
+	u32 tRAS;  /* in ps */
+
+	/* command and address timing */
+	u32 tDLLK; /* in nCK */
+	struct dram_sun9i_timing tRTP;
+	struct dram_sun9i_timing tWTR;
+	u32 tWR;   /* in nCK */
+	u32 tMRD;  /* in nCK */
+	struct dram_sun9i_timing tMOD;
+	u32 tRCD;  /* in ps */
+	u32 tRP;   /* in ps */
+	u32 tRC;   /* in ps */
+	u32 tCCD;  /* in nCK */
+	struct dram_sun9i_timing tRRD;
+	u32 tFAW;  /* in ps */
+
+	/* calibration timing */
+	/* struct dram_sun9i_timing tZQinit; */
+	struct dram_sun9i_timing tZQoper;
+	struct dram_sun9i_timing tZQCS;
+
+	/* reset timing */
+	/* struct dram_sun9i_timing tXPR; */
+
+	/* self-refresh timings */
+	struct dram_sun9i_timing tXS;
+	u32 tXSDLL; /* in nCK */
+	/* struct dram_sun9i_timing tCKESR; */
+	struct dram_sun9i_timing tCKSRE;
+	struct dram_sun9i_timing tCKSRX;
+
+	/* power-down timings */
+	struct dram_sun9i_timing tXP;
+	struct dram_sun9i_timing tXPDLL;
+	struct dram_sun9i_timing tCKE;
+
+	/* write leveling timings */
+	u32 tWLMRD;    /* min, in nCK */
+	/* u32 tWLDQSEN;  min, in nCK */
+	u32 tWLO;      /* max, in ns */
+	/* u32 tWLOE;     max, in ns */
+
+	/* u32 tCKDPX;    in nCK */
+	/* u32 tCKCSX;    in nCK */
+};
+
+static void mctl_sys_init(void);
+
+#define SCHED_RDWR_IDLE_GAP(n)            ((n & 0xff) << 24)
+#define SCHED_GO2CRITICAL_HYSTERESIS(n)   ((n & 0xff) << 16)
+#define SCHED_LPR_NUM_ENTRIES(n)          ((n & 0xff) <<  8)
+#define SCHED_PAGECLOSE                   (1 << 2)
+#define SCHED_PREFER_WRITE                (1 << 1)
+#define SCHED_FORCE_LOW_PRI_N             (1 << 0)
+
+#define SCHED_CONFIG		(SCHED_RDWR_IDLE_GAP(0xf) | \
+				 SCHED_GO2CRITICAL_HYSTERESIS(0x80) | \
+				 SCHED_LPR_NUM_ENTRIES(0x20) | \
+				 SCHED_FORCE_LOW_PRI_N)
+#define PERFHPR0_CONFIG                   0x0000001f
+#define PERFHPR1_CONFIG                   0x1f00001f
+#define PERFLPR0_CONFIG                   0x000000ff
+#define PERFLPR1_CONFIG                   0x0f0000ff
+#define PERFWR0_CONFIG                    0x000000ff
+#define PERFWR1_CONFIG                    0x0f0001ff
+
+static void mctl_ctl_sched_init(unsigned long  base)
+{
+	struct sunxi_mctl_ctl_reg *mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)base;
+
+	/* Needs to be done before the global clk enable... */
+	writel(SCHED_CONFIG, &mctl_ctl->sched);
+	writel(PERFHPR0_CONFIG, &mctl_ctl->perfhpr0);
+	writel(PERFHPR1_CONFIG, &mctl_ctl->perfhpr1);
+	writel(PERFLPR0_CONFIG, &mctl_ctl->perflpr0);
+	writel(PERFLPR1_CONFIG, &mctl_ctl->perflpr1);
+	writel(PERFWR0_CONFIG, &mctl_ctl->perfwr0);
+	writel(PERFWR1_CONFIG, &mctl_ctl->perfwr1);
+}
+
+static void mctl_sys_init(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	debug("Setting PLL6 to %d\n", DRAM_CLK * 2);
+	clock_set_pll6(DRAM_CLK * 2);
+
+	/* Original dram init code which may come in handy later
+	********************************************************
+	clock_set_pll6(use_2channelPLL ? (DRAM_CLK * 2) :
+					 (DRAM_CLK / 2), false);
+
+	if ((para->dram_clk <= 400)|((para->dram_tpr8 & 0x1)==0)) {
+		 * PLL6 should be 2*CK *
+		 * ccm_setup_pll6_ddr_clk(PLL6_DDR_CLK); *
+		ccm_setup_pll6_ddr_clk((1000000 * (para->dram_clk) * 2), 0);
+	} else {
+		 * PLL6 should be CK/2 *
+		ccm_setup_pll6_ddr_clk((1000000 * (para->dram_clk) / 2), 1);
+	}
+
+	if (para->dram_tpr13 & (0xf<<18)) {
+		 *
+		 * bit21:bit18=0001:pll swing 0.4
+		 * bit21:bit18=0010:pll swing 0.3
+		 * bit21:bit18=0100:pll swing 0.2
+		 * bit21:bit18=1000:pll swing 0.1
+		 *
+		dram_dbg("DRAM fre extend open !\n");
+		reg_val=mctl_read_w(CCM_PLL6_DDR_REG);
+		reg_val&=(0x1<<16);
+		reg_val=reg_val>>16;
+
+		if(para->dram_tpr13 & (0x1<<18))
+		{
+			mctl_write_w(CCM_PLL_BASE + 0x114,
+				(0x3333U|(0x3<<17)|(reg_val<<19)|(0x120U<<20)|
+				(0x2U<<29)|(0x1U<<31)));
+		}
+		else if(para->dram_tpr13 & (0x1<<19))
+		{
+			mctl_write_w(CCM_PLL_BASE + 0x114,
+				(0x6666U|(0x3U<<17)|(reg_val<<19)|(0xD8U<<20)|
+				(0x2U<<29)|(0x1U<<31)));
+		}
+		else if(para->dram_tpr13 & (0x1<<20))
+		{
+			mctl_write_w(CCM_PLL_BASE + 0x114,
+				(0x9999U|(0x3U<<17)|(reg_val<<19)|(0x90U<<20)|
+				(0x2U<<29)|(0x1U<<31)));
+		}
+		else if(para->dram_tpr13 & (0x1<<21))
+		{
+			mctl_write_w(CCM_PLL_BASE + 0x114,
+				(0xccccU|(0x3U<<17)|(reg_val<<19)|(0x48U<<20)|
+				(0x2U<<29)|(0x1U<<31)));
+		}
+
+		//frequency extend open
+		reg_val = mctl_read_w(CCM_PLL6_DDR_REG);
+		reg_val |= ((0x1<<24)|(0x1<<30));
+		mctl_write_w(CCM_PLL6_DDR_REG, reg_val);
+
+
+		while(mctl_read_w(CCM_PLL6_DDR_REG) & (0x1<<30));
+	}
+
+	aw_delay(0x20000);	//make some delay
+	********************************************************
+	*/
+
+	/* assert mctl reset */
+	clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+	/* stop mctl clock */
+	clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+
+	sdelay(2000);
+
+	/* deassert mctl reset */
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+	/* enable mctl clock */
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+
+	/* set up the transactions scheduling before enabling the global clk */
+	mctl_ctl_sched_init(SUNXI_DRAM_CTL0_BASE);
+	mctl_ctl_sched_init(SUNXI_DRAM_CTL1_BASE);
+	sdelay(1000);
+
+	debug("2\n");
+
+	/* (3 << 12): PLL_DDR */
+	writel((3 << 12) | (1 << 16), &ccm->dram_clk_cfg);
+	do {
+		debug("Waiting for DRAM_CLK_CFG\n");
+		sdelay(10000);
+	} while (readl(&ccm->dram_clk_cfg) & (1 << 16));
+	setbits_le32(&ccm->dram_clk_cfg, (1 << 31));
+
+	/* TODO: we only support the common case ... i.e. 2*CK */
+	setbits_le32(&mctl_com->ccr, (1 << 14) | (1 << 30));
+	writel(2, &mctl_com->rmcr); /* controller clock is PLL6/4 */
+
+	sdelay(2000);
+
+	/* Original dram init code which may come in handy later
+	********************************************************
+	if ((para->dram_clk <= 400) | ((para->dram_tpr8 & 0x1) == 0)) {
+		 * PLL6 should be 2*CK *
+		 * gating 2 channel pll *
+		reg_val = mctl_read_w(MC_CCR);
+		reg_val |= ((0x1 << 14) | (0x1U << 30));
+		mctl_write_w(MC_CCR, reg_val);
+		mctl_write_w(MC_RMCR, 0x2); * controller clock use pll6/4 *
+	} else {
+		 * enable 2 channel pll *
+		reg_val = mctl_read_w(MC_CCR);
+		reg_val &= ~((0x1 << 14) | (0x1U << 30));
+		mctl_write_w(MC_CCR, reg_val);
+		mctl_write_w(MC_RMCR, 0x0); * controller clock use pll6 *
+	}
+
+	reg_val = mctl_read_w(MC_CCR);
+	reg_val &= ~((0x1<<15)|(0x1U<<31));
+	mctl_write_w(MC_CCR, reg_val);
+	aw_delay(20);
+	//aw_delay(0x10);
+	********************************************************
+	*/
+
+	clrbits_le32(&mctl_com->ccr, MCTL_CCR_CH0_CLK_EN | MCTL_CCR_CH1_CLK_EN);
+	sdelay(1000);
+
+	setbits_le32(&mctl_com->ccr, MCTL_CCR_CH0_CLK_EN);
+	/* TODO if (para->chan == 2) */
+	setbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN);
+}
+
+static void mctl_com_init(struct dram_sun9i_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* TODO: hard-wired for DDR3 now */
+	writel(((para->chan == 2) ? MCTL_CR_CHANNEL_DUAL :
+				    MCTL_CR_CHANNEL_SINGLE)
+	       | MCTL_CR_DRAMTYPE_DDR3 | MCTL_CR_BANK(1)
+	       | MCTL_CR_ROW(para->rows)
+	       | ((para->bus_width == 32) ? MCTL_CR_BUSW32 : MCTL_CR_BUSW16)
+	       | MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_RANK(para->rank),
+	       &mctl_com->cr);
+
+	debug("CR: %d\n", readl(&mctl_com->cr));
+}
+
+static u32 mctl_channel_init(u32 ch_index, struct dram_sun9i_para *para)
+{
+	struct sunxi_mctl_ctl_reg *mctl_ctl;
+	struct sunxi_mctl_phy_reg *mctl_phy;
+
+	u32 CL = 0;
+	u32 CWL = 0;
+	u16 mr[4] = { 0, };
+
+#define PS2CYCLES_FLOOR(n)    ((n * CONFIG_DRAM_CLK) / 1000000)
+#define PS2CYCLES_ROUNDUP(n)  ((n * CONFIG_DRAM_CLK + 999999) / 1000000)
+#define NS2CYCLES_FLOOR(n)    ((n * CONFIG_DRAM_CLK) / 1000)
+#define NS2CYCLES_ROUNDUP(n)  ((n * CONFIG_DRAM_CLK + 999) / 1000)
+#define MAX(a, b)             ((a) > (b) ? (a) : (b))
+
+	/*
+	 * Convert the values to cycle counts (nCK) from what is provided
+	 * by the definition of each speed bin.
+	 */
+	/* const u32 tREFI = NS2CYCLES_FLOOR(para->tREFI); */
+	const u32 tREFI = NS2CYCLES_FLOOR(para->tREFI);
+	const u32 tRFC  = NS2CYCLES_ROUNDUP(para->tRFC);
+	const u32 tRCD  = PS2CYCLES_ROUNDUP(para->tRCD);
+	const u32 tRP   = PS2CYCLES_ROUNDUP(para->tRP);
+	const u32 tRC   = PS2CYCLES_ROUNDUP(para->tRC);
+	const u32 tRAS  = PS2CYCLES_ROUNDUP(para->tRAS);
+
+	/* command and address timing */
+	const u32 tDLLK = para->tDLLK;
+	const u32 tRTP  = MAX(para->tRTP.ck, PS2CYCLES_ROUNDUP(para->tRTP.ps));
+	const u32 tWTR  = MAX(para->tWTR.ck, PS2CYCLES_ROUNDUP(para->tWTR.ps));
+	const u32 tWR   = NS2CYCLES_FLOOR(para->tWR);
+	const u32 tMRD  = para->tMRD;
+	const u32 tMOD  = MAX(para->tMOD.ck, PS2CYCLES_ROUNDUP(para->tMOD.ps));
+	const u32 tCCD  = para->tCCD;
+	const u32 tRRD  = MAX(para->tRRD.ck, PS2CYCLES_ROUNDUP(para->tRRD.ps));
+	const u32 tFAW  = PS2CYCLES_ROUNDUP(para->tFAW);
+
+	/* calibration timings */
+	/* const u32 tZQinit = MAX(para->tZQinit.ck,
+				PS2CYCLES_ROUNDUP(para->tZQinit.ps)); */
+	const u32 tZQoper = MAX(para->tZQoper.ck,
+				PS2CYCLES_ROUNDUP(para->tZQoper.ps));
+	const u32 tZQCS   = MAX(para->tZQCS.ck,
+				PS2CYCLES_ROUNDUP(para->tZQCS.ps));
+
+	/* reset timing */
+	/* const u32 tXPR  = MAX(para->tXPR.ck,
+				PS2CYCLES_ROUNDUP(para->tXPR.ps)); */
+
+	/* power-down timings */
+	const u32 tXP    = MAX(para->tXP.ck, PS2CYCLES_ROUNDUP(para->tXP.ps));
+	const u32 tXPDLL = MAX(para->tXPDLL.ck,
+			       PS2CYCLES_ROUNDUP(para->tXPDLL.ps));
+	const u32 tCKE   = MAX(para->tCKE.ck, PS2CYCLES_ROUNDUP(para->tCKE.ps));
+
+	/*
+	 * self-refresh timings (keep below power-down timings, as tCKESR
+	 * needs to be calculated based on the nCK value of tCKE)
+	 */
+	const u32 tXS    = MAX(para->tXS.ck, PS2CYCLES_ROUNDUP(para->tXS.ps));
+	const u32 tXSDLL = para->tXSDLL;
+	const u32 tCKSRE = MAX(para->tCKSRE.ck,
+			       PS2CYCLES_ROUNDUP(para->tCKSRE.ps));
+	const u32 tCKESR = tCKE + 1;
+	const u32 tCKSRX = MAX(para->tCKSRX.ck,
+			       PS2CYCLES_ROUNDUP(para->tCKSRX.ps));
+
+	/* write leveling timings */
+	const u32 tWLMRD = para->tWLMRD;
+	/* const u32 tWLDQSEN = para->tWLDQSEN; */
+	const u32 tWLO = PS2CYCLES_FLOOR(para->tWLO);
+	/* const u32 tWLOE = PS2CYCLES_FLOOR(para->tWLOE); */
+
+	const u32 tRASmax = tREFI * 9;
+	int i;
+
+	for (i = 0; i < para->cl_cwl_numentries; ++i) {
+		const u32 tCK = 1000000 / CONFIG_DRAM_CLK;
+
+		if ((para->cl_cwl_table[i].tCKmin <= tCK) &&
+		    (tCK < para->cl_cwl_table[i].tCKmax)) {
+			CL = para->cl_cwl_table[i].CL;
+			CWL = para->cl_cwl_table[i].CWL;
+
+			debug("found CL/CWL: CL = %d, CWL = %d\n", CL, CWL);
+			break;
+		}
+	}
+
+	if ((CL == 0) && (CWL == 0)) {
+		printf("failed to find valid CL/CWL for operating point %d MHz\n",
+		       CONFIG_DRAM_CLK);
+		return 0;
+	}
+
+	if (ch_index == 0) {
+		mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+		mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	} else {
+		mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL1_BASE;
+		mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+	}
+
+	if (para->dram_type == DRAM_TYPE_DDR3) {
+		mr[0] = DDR3_MR0_PPD_FAST_EXIT | DDR3_MR0_WR(tWR) |
+			DDR3_MR0_CL(CL);
+		mr[1] = DDR3_MR1_RTT120OHM;
+		mr[2] = DDR3_MR2_TWL(CWL);
+		mr[3] = 0;
+
+		/*
+		 * DRAM3 initialisation requires holding CKE LOW for
+		 * at least 500us prior to starting the initialisation
+		 * sequence and at least 10ns after driving CKE HIGH
+		 * before the initialisation sequence may be started).
+		 *
+		 * Refer to Micron document "TN-41-07: DDR3 Power-Up,
+		 * Initialization, and Reset DDR3 Initialization
+		 * Routine" for details).
+		 */
+		writel(MCTL_INIT0_POST_CKE_x1024(1) |
+		       MCTL_INIT0_PRE_CKE_x1024(
+			    (500 * CONFIG_DRAM_CLK + 1023) / 1024), /* 500us */
+		       &mctl_ctl->init[0]);
+		writel(MCTL_INIT1_DRAM_RSTN_x1024(1),
+		       &mctl_ctl->init[1]);
+		/* INIT2 is not used for DDR3 */
+		writel(MCTL_INIT3_MR(mr[0]) | MCTL_INIT3_EMR(mr[1]),
+		       &mctl_ctl->init[3]);
+		writel(MCTL_INIT4_EMR2(mr[2]) | MCTL_INIT4_EMR3(mr[3]),
+		       &mctl_ctl->init[4]);
+		writel(MCTL_INIT5_DEV_ZQINIT_x32(512 / 32), /* 512 cycles */
+		       &mctl_ctl->init[5]);
+	} else {
+		/* !!! UNTESTED !!! */
+		/*
+		 * LPDDR2 and/or LPDDR3 require a 200us minimum delay
+		 * after driving CKE HIGH in the initialisation sequence.
+		 */
+		writel(MCTL_INIT0_POST_CKE_x1024(
+				(200 * CONFIG_DRAM_CLK + 1023) / 1024),
+		       &mctl_ctl->init[0]);
+		writel(MCTL_INIT1_DRAM_RSTN_x1024(1),
+		       &mctl_ctl->init[1]);
+		writel(MCTL_INIT2_IDLE_AFTER_RESET_x32(
+				(CONFIG_DRAM_CLK + 31) / 32) /* 1us */
+		       | MCTL_INIT2_MIN_STABLE_CLOCK_x1(5),  /* 5 cycles */
+		       &mctl_ctl->init[2]);
+		writel(MCTL_INIT3_MR(mr[1]) | MCTL_INIT3_EMR(mr[2]),
+		       &mctl_ctl->init[3]);
+		writel(MCTL_INIT4_EMR2(mr[3]),
+		       &mctl_ctl->init[4]);
+		writel(MCTL_INIT5_DEV_ZQINIT_x32(
+				(CONFIG_DRAM_CLK + 31) / 32) /* 1us */
+		       | MCTL_INIT5_MAX_AUTO_INIT_x1024(
+				(10 * CONFIG_DRAM_CLK + 1023) / 1024),
+		       &mctl_ctl->init[5]);
+	}
+
+	/* (DDR3) We always use a burst-length of 8. */
+#define MCTL_BL               8
+	/* wr2pre: WL + BL/2 + tWR */
+#define WR2PRE           (MCTL_BL/2 + CWL + tWTR)
+	/* wr2rd = CWL + BL/2 + tWTR */
+#define WR2RD            (MCTL_BL/2 + CWL + tWTR)
+	/*
+	 * rd2wr = RL + BL/2 + 2 - WL (for DDR3)
+	 * rd2wr = RL + BL/2 + RU(tDQSCKmax/tCK) + 1 - WL (for LPDDR2/LPDDR3)
+	 */
+#define RD2WR            (CL + MCTL_BL/2 + 2 - CWL)
+#define MCTL_PHY_TRTW        0
+#define MCTL_PHY_TRTODT      0
+
+#define MCTL_DIV2(n)         ((n + 1)/2)
+#define MCTL_DIV32(n)        (n/32)
+#define MCTL_DIV1024(n)      (n/1024)
+
+	writel((MCTL_DIV2(WR2PRE) << 24) | (MCTL_DIV2(tFAW) << 16) |
+	       (MCTL_DIV1024(tRASmax) << 8) | (MCTL_DIV2(tRAS) << 0),
+	       &mctl_ctl->dramtmg[0]);
+	writel((MCTL_DIV2(tXP) << 16) | (MCTL_DIV2(tRTP) << 8) |
+	       (MCTL_DIV2(tRC) << 0),
+	       &mctl_ctl->dramtmg[1]);
+	writel((MCTL_DIV2(CWL) << 24) | (MCTL_DIV2(CL) << 16) |
+	       (MCTL_DIV2(RD2WR) << 8) | (MCTL_DIV2(WR2RD) << 0),
+	       &mctl_ctl->dramtmg[2]);
+	/*
+	 * Note: tMRW is located at bit 16 (and up) in DRAMTMG3...
+	 * this is only relevant for LPDDR2/LPDDR3
+	 */
+	writel((MCTL_DIV2(tMRD) << 12) | (MCTL_DIV2(tMOD) << 0),
+	       &mctl_ctl->dramtmg[3]);
+	writel((MCTL_DIV2(tRCD) << 24) | (MCTL_DIV2(tCCD) << 16) |
+	       (MCTL_DIV2(tRRD) << 8) | (MCTL_DIV2(tRP) << 0),
+	       &mctl_ctl->dramtmg[4]);
+	writel((MCTL_DIV2(tCKSRX) << 24) | (MCTL_DIV2(tCKSRE) << 16) |
+	       (MCTL_DIV2(tCKESR) << 8) | (MCTL_DIV2(tCKE) << 0),
+	       &mctl_ctl->dramtmg[5]);
+
+	/* These timings are relevant for LPDDR2/LPDDR3 only */
+	/* writel((MCTL_TCKDPDE << 24) | (MCTL_TCKDPX << 16) |
+	       (MCTL_TCKCSX << 0), &mctl_ctl->dramtmg[6]); */
+
+	/* printf("DRAMTMG7 reset value: 0x%x\n",
+		readl(&mctl_ctl->dramtmg[7])); */
+	/* DRAMTMG7 reset value: 0x202 */
+	/* DRAMTMG7 should contain t_ckpde and t_ckpdx: check reset values!!! */
+	/* printf("DRAMTMG8 reset value: 0x%x\n",
+		readl(&mctl_ctl->dramtmg[8])); */
+	/* DRAMTMG8 reset value: 0x44 */
+
+	writel((MCTL_DIV32(tXSDLL) << 0), &mctl_ctl->dramtmg[8]);
+
+	writel((MCTL_DIV32(tREFI) << 16) | (MCTL_DIV2(tRFC) << 0),
+	       &mctl_ctl->rfshtmg);
+
+	if (para->dram_type == DRAM_TYPE_DDR3) {
+		writel((2 << 24) | ((MCTL_DIV2(CL) - 2) << 16) |
+		       (1 << 8) | ((MCTL_DIV2(CWL) - 2) << 0),
+			&mctl_ctl->dfitmg[0]);
+	} else {
+		/* TODO */
+	}
+
+	/* TODO: handle the case of the write latency domain going to 0 ... */
+
+	/*
+	 * Disable dfi_init_complete_en (the triggering of the SDRAM
+	 * initialisation when the PHY initialisation completes).
+	 */
+	clrbits_le32(&mctl_ctl->dfimisc, MCTL_DFIMISC_DFI_INIT_COMPLETE_EN);
+	/* Disable the automatic generation of DLL calibration requests */
+	setbits_le32(&mctl_ctl->dfiupd[0], MCTL_DFIUPD0_DIS_AUTO_CTRLUPD);
+
+	/* A80-Q7: 2T, 1 rank, DDR3, full-32bit-DQ */
+	/* TODO: make 2T and BUSWIDTH configurable  */
+	writel(MCTL_MSTR_DEVICETYPE(para->dram_type) |
+	       MCTL_MSTR_BURSTLENGTH(para->dram_type) |
+	       MCTL_MSTR_ACTIVERANKS(para->rank) |
+	       MCTL_MSTR_2TMODE | MCTL_MSTR_BUSWIDTH32,
+	       &mctl_ctl->mstr);
+
+	if (para->dram_type == DRAM_TYPE_DDR3) {
+		writel(MCTL_ZQCTRL0_TZQCL(MCTL_DIV2(tZQoper)) |
+		       (MCTL_DIV2(tZQCS)), &mctl_ctl->zqctrl[0]);
+		/*
+		 * TODO: is the following really necessary as the bottom
+		 * half should already be 0x100 and the upper half should
+		 * be ignored for a DDR3 device???
+		 */
+		writel(MCTL_ZQCTRL1_TZQSI_x1024(0x100),
+		       &mctl_ctl->zqctrl[1]);
+	} else {
+		writel(MCTL_ZQCTRL0_TZQCL(0x200) | MCTL_ZQCTRL0_TZQCS(0x40),
+		       &mctl_ctl->zqctrl[0]);
+		writel(MCTL_ZQCTRL1_TZQRESET(0x28) |
+		       MCTL_ZQCTRL1_TZQSI_x1024(0x100),
+		       &mctl_ctl->zqctrl[1]);
+	}
+
+	/* Assert dfi_init_complete signal */
+	setbits_le32(&mctl_ctl->dfimisc, MCTL_DFIMISC_DFI_INIT_COMPLETE_EN);
+	/* Disable auto-refresh */
+	setbits_le32(&mctl_ctl->rfshctl3, MCTL_RFSHCTL3_DIS_AUTO_REFRESH);
+
+	/* PHY initialisation */
+
+	/* TODO: make 2T and 8-bank mode configurable  */
+	writel(MCTL_PHY_DCR_BYTEMASK | MCTL_PHY_DCR_2TMODE |
+	       MCTL_PHY_DCR_DDR8BNK | MCTL_PHY_DRAMMODE_DDR3,
+	       &mctl_phy->dcr);
+
+	/* For LPDDR2 or LPDDR3, set DQSGX to 0 before training. */
+	if (para->dram_type != DRAM_TYPE_DDR3)
+		clrbits_le32(&mctl_phy->dsgcr, (3 << 6));
+
+	writel(mr[0], &mctl_phy->mr0);
+	writel(mr[1], &mctl_phy->mr1);
+	writel(mr[2], &mctl_phy->mr2);
+	writel(mr[3], &mctl_phy->mr3);
+
+	/*
+	 * The DFI PHY is running at full rate. We thus use the actual
+	 * timings in clock cycles here.
+	 */
+	writel((tRC << 26) | (tRRD << 22) | (tRAS << 16) |
+	       (tRCD << 12) | (tRP << 8) | (tWTR << 4) | (tRTP << 0),
+		&mctl_phy->dtpr[0]);
+	writel((tMRD << 0) | ((tMOD - 12) << 2) | (tFAW << 5) |
+	       (tRFC << 11) | (tWLMRD << 20) | (tWLO << 26),
+	       &mctl_phy->dtpr[1]);
+	writel((tXS << 0) | (MAX(tXP, tXPDLL) << 10) |
+	       (tCKE << 15) | (tDLLK << 19) |
+	       (MCTL_PHY_TRTODT << 29) | (MCTL_PHY_TRTW << 30) |
+	       (((tCCD - 4) & 0x1) << 31),
+	       &mctl_phy->dtpr[2]);
+
+	/* tDQSCK and tDQSCKmax are used LPDDR2/LPDDR3 */
+	/* writel((tDQSCK << 0) | (tDQSCKMAX << 3), &mctl_phy->dtpr[3]); */
+
+	/*
+	 * We use the same values used by Allwinner's Boot0 for the PTR
+	 * (PHY timing register) configuration that is tied to the PHY
+	 * implementation.
+	 */
+	writel(0x42C21590, &mctl_phy->ptr[0]);
+	writel(0xD05612C0, &mctl_phy->ptr[1]);
+	if (para->dram_type == DRAM_TYPE_DDR3) {
+		const unsigned int tdinit0 = 500 * CONFIG_DRAM_CLK; /* 500us */
+		const unsigned int tdinit1 = (360 * CONFIG_DRAM_CLK + 999) /
+			1000; /* 360ns */
+		const unsigned int tdinit2 = 200 * CONFIG_DRAM_CLK; /* 200us */
+		const unsigned int tdinit3 = CONFIG_DRAM_CLK; /* 1us */
+
+		writel((tdinit1 << 20) | tdinit0, &mctl_phy->ptr[3]);
+		writel((tdinit3 << 18) | tdinit2, &mctl_phy->ptr[4]);
+	} else {
+		/* LPDDR2 or LPDDR3 */
+		const unsigned int tdinit0 = (100 * CONFIG_DRAM_CLK + 999) /
+			1000; /* 100ns */
+		const unsigned int tdinit1 = 200 * CONFIG_DRAM_CLK; /* 200us */
+		const unsigned int tdinit2 = 22 * CONFIG_DRAM_CLK; /* 11us */
+		const unsigned int tdinit3 = 2 * CONFIG_DRAM_CLK; /* 2us */
+
+		writel((tdinit1 << 20) | tdinit0, &mctl_phy->ptr[3]);
+		writel((tdinit3 << 18) | tdinit2, &mctl_phy->ptr[4]);
+	}
+
+	/* TEST ME */
+	writel(0x00203131, &mctl_phy->acmdlr);
+
+	/* TODO: can we enable this for 2 ranks, even when we don't know yet */
+	writel(MCTL_DTCR_DEFAULT | MCTL_DTCR_RANKEN(para->rank),
+	       &mctl_phy->dtcr);
+
+	/* TODO: half width */
+	debug("DX2GCR0 reset: 0x%x\n", readl(&mctl_phy->dx[2].gcr[0]));
+	writel(0x7C000285, &mctl_phy->dx[2].gcr[0]);
+	writel(0x7C000285, &mctl_phy->dx[3].gcr[0]);
+
+	clrsetbits_le32(&mctl_phy->zq[0].pr, 0xff,
+			(CONFIG_DRAM_ZQ >>  0) & 0xff);  /* CK/CA */
+	clrsetbits_le32(&mctl_phy->zq[1].pr, 0xff,
+			(CONFIG_DRAM_ZQ >>  8) & 0xff);  /* DX0/DX1 */
+	clrsetbits_le32(&mctl_phy->zq[2].pr, 0xff,
+			(CONFIG_DRAM_ZQ >> 16) & 0xff);  /* DX2/DX3 */
+
+	/* TODO: make configurable & implement non-ODT path */
+	if (1) {
+		int lane;
+		for (lane = 0; lane < 4; ++lane) {
+			clrbits_le32(&mctl_phy->dx[lane].gcr[2], 0xffff);
+			clrbits_le32(&mctl_phy->dx[lane].gcr[3],
+				     (0x3<<12) | (0x3<<4));
+		}
+	} else {
+		/* TODO: check */
+		int lane;
+		for (lane = 0; lane < 4; ++lane) {
+			clrsetbits_le32(&mctl_phy->dx[lane].gcr[2], 0xffff,
+					0xaaaa);
+			if (para->dram_type == DRAM_TYPE_DDR3)
+				setbits_le32(&mctl_phy->dx[lane].gcr[3],
+					     (0x3<<12) | (0x3<<4));
+			else
+				setbits_le32(&mctl_phy->dx[lane].gcr[3],
+					     0x00000012);
+		}
+	}
+
+	writel(0x04058D02, &mctl_phy->zq[0].cr); /* CK/CA */
+	writel(0x04058D02, &mctl_phy->zq[1].cr); /* DX0/DX1 */
+	writel(0x04058D02, &mctl_phy->zq[2].cr); /* DX2/DX3 */
+
+	/* Disable auto-refresh prior to data training */
+	setbits_le32(&mctl_ctl->rfshctl3, MCTL_RFSHCTL3_DIS_AUTO_REFRESH);
+
+	setbits_le32(&mctl_phy->dsgcr, 0xf << 24); /* unclear what this is... */
+	/* TODO: IODDRM (IO DDR-MODE) for DDR3L */
+	clrsetbits_le32(&mctl_phy->pgcr[1],
+			MCTL_PGCR1_ZCKSEL_MASK,
+			MCTL_PGCR1_IODDRM_DDR3 | MCTL_PGCR1_INHVT_EN);
+
+	setbits_le32(&mctl_phy->pllcr, 0x3 << 19); /* PLL frequency select */
+	/* TODO: single-channel PLL mode??? missing */
+	setbits_le32(&mctl_phy->pllcr,
+		     MCTL_PLLGCR_PLL_BYPASS | MCTL_PLLGCR_PLL_POWERDOWN);
+	/* setbits_le32(&mctl_phy->pir, MCTL_PIR_PLL_BYPASS); included below */
+
+	/* Disable VT compensation */
+	clrbits_le32(&mctl_phy->pgcr[0], 0x3f);
+
+	/* TODO: "other" PLL mode ... 0x20000 seems to be the PLL Bypass */
+	if (para->dram_type == DRAM_TYPE_DDR3)
+		clrsetbits_le32(&mctl_phy->pir, MCTL_PIR_MASK, 0x20df3);
+	else
+		clrsetbits_le32(&mctl_phy->pir, MCTL_PIR_MASK, 0x2c573);
+
+	sdelay(10000); /* XXX necessary? */
+
+	/* Wait for the INIT bit to clear itself... */
+	while ((readl(&mctl_phy->pir) & MCTL_PIR_INIT) != MCTL_PIR_INIT) {
+		/* not done yet -- keep spinning */
+		debug("MCTL_PIR_INIT not set\n");
+		sdelay(1000);
+		/* TODO: implement timeout */
+	}
+
+	/* TODO: not used --- there's a "2rank debug" section here */
+
+	/* Original dram init code which may come in handy later
+	********************************************************
+	 * LPDDR2 and LPDDR3 *
+	if ((para->dram_type) == 6 || (para->dram_type) == 7) {
+		reg_val = mctl_read_w(P0_DSGCR + ch_offset);
+		reg_val &= (~(0x3<<6));		* set DQSGX to 1 *
+		reg_val |= (0x1<<6);		* dqs gate extend *
+		mctl_write_w(P0_DSGCR + ch_offset, reg_val);
+		dram_dbg("DQS Gate Extend Enable!\n", ch_index);
+	}
+
+	 * Disable ZCAL after initial--for nand dma debug--20140330 by YSZ *
+	if (para->dram_tpr13 & (0x1<<31)) {
+		reg_val = mctl_read_w(P0_ZQ0CR + ch_offset);
+		reg_val |= (0x7<<11);
+		mctl_write_w(P0_ZQ0CR + ch_offset, reg_val);
+	}
+	********************************************************
+	*/
+
+	/*
+	 * TODO: more 2-rank support
+	 * (setting the "dqs gate delay to average between 2 rank")
+	 */
+
+	/* check if any errors are set */
+	if (readl(&mctl_phy->pgsr[0]) & MCTL_PGSR0_ERRORS) {
+		debug("Channel %d unavailable!\n", ch_index);
+		return 0;
+	} else{
+		/* initial OK */
+		debug("Channel %d OK!\n", ch_index);
+		/* return 1; */
+	}
+
+	while ((readl(&mctl_ctl->stat) & 0x1) != 0x1) {
+		debug("Waiting for INIT to be done (controller to come up into 'normal operating' mode\n");
+		sdelay(100000);
+		/* init not done */
+		/* TODO: implement time-out */
+	}
+	debug("done\n");
+
+	/* "DDR is controller by contoller" */
+	clrbits_le32(&mctl_phy->pgcr[3], (1 << 25));
+
+	/* TODO: is the following necessary? */
+	debug("DFIMISC before writing 0: 0x%x\n", readl(&mctl_ctl->dfimisc));
+	writel(0, &mctl_ctl->dfimisc);
+
+	/* Enable auto-refresh */
+	clrbits_le32(&mctl_ctl->rfshctl3, MCTL_RFSHCTL3_DIS_AUTO_REFRESH);
+
+	debug("channel_init complete\n");
+	return 1;
+}
+
+signed int DRAMC_get_dram_size(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	unsigned int reg_val;
+	unsigned int dram_size;
+	unsigned int temp;
+
+	reg_val = readl(&mctl_com->cr);
+
+	temp = (reg_val >> 8) & 0xf;	/* page size code */
+	dram_size = (temp - 6);		/* (1 << dram_size) * 512Bytes */
+
+	temp = (reg_val >> 4) & 0xf;	/* row width code */
+	dram_size += (temp + 1);	/* (1 << dram_size) * 512Bytes */
+
+	temp = (reg_val >> 2) & 0x3;	/* bank number code */
+	dram_size += (temp + 2);	/* (1 << dram_size) * 512Bytes */
+
+	temp = reg_val & 0x3;		/* rank number code */
+	dram_size += temp;		/* (1 << dram_size) * 512Bytes */
+
+	temp = (reg_val >> 19) & 0x1;	/* channel number code */
+	dram_size += temp;		/* (1 << dram_size) * 512Bytes */
+
+	dram_size = dram_size - 11;	/* (1 << dram_size) MBytes */
+
+	return 1 << dram_size;
+}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	struct dram_sun9i_cl_cwl_timing cl_cwl[] = {
+		{ .CL =  5, .CWL = 5, .tCKmin = 3000, .tCKmax = 3300 },
+		{ .CL =  6, .CWL = 5, .tCKmin = 2500, .tCKmax = 3300 },
+		{ .CL =  8, .CWL = 6, .tCKmin = 1875, .tCKmax = 2500 },
+		{ .CL = 10, .CWL = 7, .tCKmin = 1500, .tCKmax = 1875 },
+		{ .CL = 11, .CWL = 8, .tCKmin = 1250, .tCKmax = 1500 }
+	};
+
+	/* Set initial parameters, these get modified by the autodetect code */
+	struct dram_sun9i_para para = {
+		.dram_type = DRAM_TYPE_DDR3,
+		.bus_width = 32,
+		.chan = 2,
+		.rank = 1,
+		/* .rank = 2, */
+		.page_size = 4096,
+		/* .rows = 16, */
+		.rows = 15,
+
+		/* CL/CWL table for the speed bin */
+		.cl_cwl_table = cl_cwl,
+		.cl_cwl_numentries = sizeof(cl_cwl) /
+			sizeof(struct dram_sun9i_cl_cwl_timing),
+
+		/* timings */
+		.tREFI = 7800,	/* 7.8us (up to 85 degC) */
+		.tRFC  = 260,	/* 260ns for 4GBit devices */
+				/* 350ns @ 8GBit */
+
+		.tRCD  = 13750,
+		.tRP   = 13750,
+		.tRC   = 48750,
+		.tRAS  = 35000,
+
+		.tDLLK = 512,
+		.tRTP  = { .ck = 4, .ps = 7500 },
+		.tWTR  = { .ck = 4, .ps = 7500 },
+		.tWR   = 15,
+		.tMRD  = 4,
+		.tMOD  = { .ck = 12, .ps = 15000 },
+		.tCCD  = 4,
+		.tRRD  = { .ck = 4, .ps = 7500 },
+		.tFAW  = 40,
+
+		/* calibration timing */
+		/* .tZQinit = { .ck = 512, .ps = 640000 }, */
+		.tZQoper = { .ck = 256, .ps = 320000 },
+		.tZQCS   = { .ck = 64,  .ps = 80000 },
+
+		/* reset timing */
+		/* .tXPR  = { .ck = 5, .ps = 10000 }, */
+
+		/* self-refresh timings */
+		.tXS  = { .ck = 5, .ps = 10000 },
+		.tXSDLL = 512,
+		.tCKSRE = { .ck = 5, .ps = 10000 },
+		.tCKSRX = { .ck = 5, .ps = 10000 },
+
+		/* power-down timings */
+		.tXP = { .ck = 3, .ps = 6000 },
+		.tXPDLL = { .ck = 10, .ps = 24000 },
+		.tCKE = { .ck = 3, .ps = 5000 },
+
+		/* write leveling timings */
+		.tWLMRD = 40,
+		/* .tWLDQSEN = 25, */
+		.tWLO = 7500,
+		/* .tWLOE = 2000, */
+	};
+
+	/*
+	 * Disable A80 internal 240 ohm resistor.
+	 *
+	 * This code sequence is adapated from Allwinner's Boot0 (see
+	 * https://github.com/allwinner-zh/bootloader.git), as there
+	 * is no documentation for these two registers in the R_PRCM
+	 * block.
+	 */
+	setbits_le32(SUNXI_PRCM_BASE + 0x1e0, (0x3 << 8));
+	writel(0, SUNXI_PRCM_BASE + 0x1e8);
+
+	mctl_sys_init();
+
+	if (!mctl_channel_init(0, &para))
+		return 0;
+
+	/* dual-channel */
+	if (!mctl_channel_init(1, &para)) {
+		/* disable channel 1 */
+		clrsetbits_le32(&mctl_com->cr, MCTL_CR_CHANNEL_MASK,
+				MCTL_CR_CHANNEL_SINGLE);
+		/* disable channel 1 global clock */
+		clrbits_le32(&mctl_com->cr, MCTL_CCR_CH1_CLK_EN);
+	}
+
+	mctl_com_init(&para);
+
+	/* return the proper RAM size */
+	return DRAMC_get_dram_size() << 20;
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_sunxi_dw.c b/roms/u-boot/arch/arm/mach-sunxi/dram_sunxi_dw.c
new file mode 100644
index 000000000..9107b114d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_sunxi_dw.c
@@ -0,0 +1,948 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sun8i H3 platform dram controller init
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015      Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2015      Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2015      Jens Kuske <jenskuske@gmail.com>
+ */
+#include <common.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+#include <linux/delay.h>
+#include <linux/kconfig.h>
+
+static void mctl_phy_init(u32 val)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	writel(val | PIR_INIT, &mctl_ctl->pir);
+	mctl_await_completion(&mctl_ctl->pgsr[0], PGSR_INIT_DONE, 0x1);
+}
+
+static void mctl_set_bit_delays(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	int i, j;
+
+	clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
+
+	for (i = 0; i < NR_OF_BYTE_LANES; i++)
+		for (j = 0; j < LINES_PER_BYTE_LANE; j++)
+			writel(DXBDLR_WRITE_DELAY(para->dx_write_delays[i][j]) |
+			       DXBDLR_READ_DELAY(para->dx_read_delays[i][j]),
+			       &mctl_ctl->dx[i].bdlr[j]);
+
+	for (i = 0; i < 31; i++)
+		writel(ACBDLR_WRITE_DELAY(para->ac_delays[i]),
+		       &mctl_ctl->acbdlr[i]);
+
+#ifdef CONFIG_MACH_SUN8I_R40
+	/* DQSn, DMn, DQn output enable bit delay */
+	for (i = 0; i < 4; i++)
+		writel(0x6 << 24, &mctl_ctl->dx[i].sdlr);
+#endif
+
+	setbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
+}
+
+enum {
+	MBUS_PORT_CPU           = 0,
+	MBUS_PORT_GPU           = 1,
+	MBUS_PORT_UNUSED	= 2,
+	MBUS_PORT_DMA           = 3,
+	MBUS_PORT_VE            = 4,
+	MBUS_PORT_CSI           = 5,
+	MBUS_PORT_NAND          = 6,
+	MBUS_PORT_SS            = 7,
+	MBUS_PORT_DE_V3S        = 8,
+	MBUS_PORT_DE_CFD_V3S    = 9,
+	MBUS_PORT_TS            = 8,
+	MBUS_PORT_DI            = 9,
+	MBUS_PORT_DE            = 10,
+	MBUS_PORT_DE_CFD        = 11,
+	MBUS_PORT_UNKNOWN1	= 12,
+	MBUS_PORT_UNKNOWN2	= 13,
+	MBUS_PORT_UNKNOWN3	= 14,
+};
+
+enum {
+	MBUS_QOS_LOWEST = 0,
+	MBUS_QOS_LOW,
+	MBUS_QOS_HIGH,
+	MBUS_QOS_HIGHEST
+};
+
+static inline void mbus_configure_port(u8 port,
+				       bool bwlimit,
+				       bool priority,
+				       u8 qos,         /* MBUS_QOS_LOWEST .. MBUS_QOS_HIGEST */
+				       u8 waittime,    /* 0 .. 0xf */
+				       u8 acs,         /* 0 .. 0xff */
+				       u16 bwl0,       /* 0 .. 0xffff, bandwidth limit in MB/s */
+				       u16 bwl1,
+				       u16 bwl2)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
+			   | (priority ? (1 << 1) : 0)
+			   | ((qos & 0x3) << 2)
+			   | ((waittime & 0xf) << 4)
+			   | ((acs & 0xff) << 8)
+			   | (bwl0 << 16) );
+	const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
+
+	debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
+	writel(cfg0, &mctl_com->mcr[port][0]);
+	writel(cfg1, &mctl_com->mcr[port][1]);
+}
+
+#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2)	\
+	mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \
+			    MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
+
+static void mctl_set_master_priority_h3(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel((1 << 16) | (400 << 0), &mctl_com->bwcr);
+
+	/* set cpu high priority */
+	writel(0x00000001, &mctl_com->mapr);
+
+	MBUS_CONF(   CPU,  true, HIGHEST, 0,  512,  256,  128);
+	MBUS_CONF(   GPU,  true,    HIGH, 0, 1536, 1024,  256);
+	MBUS_CONF(UNUSED,  true, HIGHEST, 0,  512,  256,   96);
+	MBUS_CONF(   DMA,  true, HIGHEST, 0,  256,  128,   32);
+	MBUS_CONF(    VE,  true,    HIGH, 0, 1792, 1600,  256);
+	MBUS_CONF(   CSI,  true, HIGHEST, 0,  256,  128,   32);
+	MBUS_CONF(  NAND,  true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF(    SS,  true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(    TS,  true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(    DI,  true,    HIGH, 0, 1024,  256,   64);
+	MBUS_CONF(    DE,  true, HIGHEST, 3, 8192, 6120, 1024);
+	MBUS_CONF(DE_CFD,  true,    HIGH, 0, 1024,  288,   64);
+}
+
+static void mctl_set_master_priority_v3s(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel((1 << 16) | (400 << 0), &mctl_com->bwcr);
+
+	/* set cpu high priority */
+	writel(0x00000001, &mctl_com->mapr);
+
+	MBUS_CONF(       CPU,  true, HIGHEST, 0,  160,  100,   80);
+	MBUS_CONF(       GPU,  true,    HIGH, 0, 1792, 1536,    0);
+	MBUS_CONF(    UNUSED,  true, HIGHEST, 0,  256,  128,   80);
+	MBUS_CONF(       DMA,  true,    HIGH, 0,  256,  100,    0);
+	MBUS_CONF(        VE,  true,    HIGH, 0, 2048, 1600,    0);
+	MBUS_CONF(       CSI,  true, HIGHEST, 0,  384,  256,    0);
+	MBUS_CONF(      NAND,  true,    HIGH, 0,  100,   50,    0);
+	MBUS_CONF(        SS,  true,    HIGH, 0,  384,  256,    0);
+	MBUS_CONF(    DE_V3S, false,    HIGH, 0, 8192, 4096,    0);
+	MBUS_CONF(DE_CFD_V3S,  true,    HIGH, 0,  640,  256,    0);
+}
+
+static void mctl_set_master_priority_a64(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel(399, &mctl_com->tmr);
+	writel((1 << 16), &mctl_com->bwcr);
+
+	/* Port 2 is reserved per Allwinner's linux-3.10 source, yet they
+	 * initialise it */
+	MBUS_CONF(   CPU,  true, HIGHEST, 0,  160,  100,   80);
+	MBUS_CONF(   GPU, false,    HIGH, 0, 1536, 1400,  256);
+	MBUS_CONF(UNUSED,  true, HIGHEST, 0,  512,  256,   96);
+	MBUS_CONF(   DMA,  true,    HIGH, 0,  256,   80,  100);
+	MBUS_CONF(    VE,  true,    HIGH, 0, 1792, 1600,  256);
+	MBUS_CONF(   CSI,  true,    HIGH, 0,  256,  128,    0);
+	MBUS_CONF(  NAND,  true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF(    SS,  true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(    TS,  true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(    DI,  true,    HIGH, 0, 1024,  256,   64);
+	MBUS_CONF(    DE,  true,    HIGH, 2, 8192, 6144, 2048);
+	MBUS_CONF(DE_CFD,  true,    HIGH, 0, 1280,  144,   64);
+
+	writel(0x81000004, &mctl_com->mdfs_bwlr[2]);
+}
+
+static void mctl_set_master_priority_h5(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel(399, &mctl_com->tmr);
+	writel((1 << 16), &mctl_com->bwcr);
+
+	/* set cpu high priority */
+	writel(0x00000001, &mctl_com->mapr);
+
+	/* Port 2 is reserved per Allwinner's linux-3.10 source, yet
+	 * they initialise it */
+	MBUS_CONF(   CPU, true, HIGHEST, 0,  300,  260,  150);
+	MBUS_CONF(   GPU, true, HIGHEST, 0,  600,  400,  200);
+	MBUS_CONF(UNUSED, true, HIGHEST, 0,  512,  256,   96);
+	MBUS_CONF(   DMA, true, HIGHEST, 0,  256,  128,   32);
+	MBUS_CONF(    VE, true, HIGHEST, 0, 1900, 1500, 1000);
+	MBUS_CONF(   CSI, true, HIGHEST, 0,  150,  120,  100);
+	MBUS_CONF(  NAND, true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF(    SS, true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(    TS, true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(    DI, true,    HIGH, 0, 1024,  256,   64);
+	MBUS_CONF(    DE, true, HIGHEST, 3, 3400, 2400, 1024);
+	MBUS_CONF(DE_CFD, true, HIGHEST, 0,  600,  400,  200);
+}
+
+static void mctl_set_master_priority_r40(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel(399, &mctl_com->tmr);
+	writel((1 << 16), &mctl_com->bwcr);
+
+	/* set cpu high priority */
+	writel(0x00000001, &mctl_com->mapr);
+
+	/* Port 2 is reserved per Allwinner's linux-3.10 source, yet
+	 * they initialise it */
+	MBUS_CONF(     CPU, true, HIGHEST, 0,  300,  260,  150);
+	MBUS_CONF(     GPU, true, HIGHEST, 0,  600,  400,  200);
+	MBUS_CONF(  UNUSED, true, HIGHEST, 0,  512,  256,   96);
+	MBUS_CONF(     DMA, true, HIGHEST, 0,  256,  128,   32);
+	MBUS_CONF(      VE, true, HIGHEST, 0, 1900, 1500, 1000);
+	MBUS_CONF(     CSI, true, HIGHEST, 0,  150,  120,  100);
+	MBUS_CONF(    NAND, true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF(      SS, true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(      TS, true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(      DI, true,    HIGH, 0, 1024,  256,   64);
+
+	/*
+	 * The port names are probably wrong, but no correct sources
+	 * are available.
+	 */
+	MBUS_CONF(      DE, true,    HIGH, 0,  128,   48,    0);
+	MBUS_CONF(  DE_CFD, true,    HIGH, 0,  384,  256,    0);
+	MBUS_CONF(UNKNOWN1, true, HIGHEST, 0,  512,  384,  256);
+	MBUS_CONF(UNKNOWN2, true, HIGHEST, 2, 8192, 6144, 1024);
+	MBUS_CONF(UNKNOWN3, true,    HIGH, 0, 1280,  144,   64);
+}
+
+static void mctl_set_master_priority(uint16_t socid)
+{
+	switch (socid) {
+	case SOCID_H3:
+		mctl_set_master_priority_h3();
+		return;
+	case SOCID_V3S:
+		mctl_set_master_priority_v3s();
+		return;
+	case SOCID_A64:
+		mctl_set_master_priority_a64();
+		return;
+	case SOCID_H5:
+		mctl_set_master_priority_h5();
+		return;
+	case SOCID_R40:
+		mctl_set_master_priority_r40();
+		return;
+	}
+}
+
+static u32 bin_to_mgray(int val)
+{
+	static const u8 lookup_table[32] = {
+		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
+		0x0c, 0x0d, 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09,
+		0x18, 0x19, 0x1a, 0x1b, 0x1e, 0x1f, 0x1c, 0x1d,
+		0x14, 0x15, 0x16, 0x17, 0x12, 0x13, 0x10, 0x11,
+	};
+
+	return lookup_table[clamp(val, 0, 31)];
+}
+
+static int mgray_to_bin(u32 val)
+{
+	static const u8 lookup_table[32] = {
+		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
+		0x0e, 0x0f, 0x0c, 0x0d, 0x08, 0x09, 0x0a, 0x0b,
+		0x1e, 0x1f, 0x1c, 0x1d, 0x18, 0x19, 0x1a, 0x1b,
+		0x10, 0x11, 0x12, 0x13, 0x16, 0x17, 0x14, 0x15,
+	};
+
+	return lookup_table[val & 0x1f];
+}
+
+static void mctl_h3_zq_calibration_quirk(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	int zq_count;
+
+#if defined CONFIG_SUNXI_DRAM_DW_16BIT
+	zq_count = 4;
+#else
+	zq_count = 6;
+#endif
+
+	if ((readl(SUNXI_SRAMC_BASE + 0x24) & 0xff) == 0 &&
+	    (readl(SUNXI_SRAMC_BASE + 0xf0) & 0x1) == 0) {
+		u32 reg_val;
+
+		clrsetbits_le32(&mctl_ctl->zqcr, 0xffff,
+				CONFIG_DRAM_ZQ & 0xffff);
+
+		writel(PIR_CLRSR, &mctl_ctl->pir);
+		mctl_phy_init(PIR_ZCAL);
+
+		reg_val = readl(&mctl_ctl->zqdr[0]);
+		reg_val &= (0x1f << 16) | (0x1f << 0);
+		reg_val |= reg_val << 8;
+		writel(reg_val, &mctl_ctl->zqdr[0]);
+
+		reg_val = readl(&mctl_ctl->zqdr[1]);
+		reg_val &= (0x1f << 16) | (0x1f << 0);
+		reg_val |= reg_val << 8;
+		writel(reg_val, &mctl_ctl->zqdr[1]);
+		writel(reg_val, &mctl_ctl->zqdr[2]);
+	} else {
+		int i;
+		u16 zq_val[6];
+		u8 val;
+
+		writel(0x0a0a0a0a, &mctl_ctl->zqdr[2]);
+
+		for (i = 0; i < zq_count; i++) {
+			u8 zq = (CONFIG_DRAM_ZQ >> (i * 4)) & 0xf;
+
+			writel((zq << 20) | (zq << 16) | (zq << 12) |
+					(zq << 8) | (zq << 4) | (zq << 0),
+					&mctl_ctl->zqcr);
+
+			writel(PIR_CLRSR, &mctl_ctl->pir);
+			mctl_phy_init(PIR_ZCAL);
+
+			zq_val[i] = readl(&mctl_ctl->zqdr[0]) & 0xff;
+			writel(REPEAT_BYTE(zq_val[i]), &mctl_ctl->zqdr[2]);
+
+			writel(PIR_CLRSR, &mctl_ctl->pir);
+			mctl_phy_init(PIR_ZCAL);
+
+			val = readl(&mctl_ctl->zqdr[0]) >> 24;
+			zq_val[i] |= bin_to_mgray(mgray_to_bin(val) - 1) << 8;
+		}
+
+		writel((zq_val[1] << 16) | zq_val[0], &mctl_ctl->zqdr[0]);
+		writel((zq_val[3] << 16) | zq_val[2], &mctl_ctl->zqdr[1]);
+		if (zq_count > 4)
+			writel((zq_val[5] << 16) | zq_val[4],
+			       &mctl_ctl->zqdr[2]);
+	}
+}
+
+static void mctl_v3s_zq_calibration_quirk(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	u32 reg_val;
+
+	clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff,
+			CONFIG_DRAM_ZQ & 0xffffff);
+	mctl_phy_init(PIR_ZCAL);
+
+	reg_val = readl(&mctl_ctl->zqdr[0]);
+	reg_val &= (0x1f << 16) | (0x1f << 0);
+	reg_val |= reg_val << 8;
+	writel(reg_val, &mctl_ctl->zqdr[0]);
+
+	reg_val = readl(&mctl_ctl->zqdr[1]);
+	reg_val &= (0x1f << 16) | (0x1f << 0);
+	reg_val |= reg_val << 8;
+	writel(reg_val, &mctl_ctl->zqdr[1]);
+}
+
+static void mctl_set_cr(uint16_t socid, struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	writel(MCTL_CR_BL8 | MCTL_CR_INTERLEAVED |
+#if defined CONFIG_SUNXI_DRAM_DDR3
+	       MCTL_CR_DDR3 | MCTL_CR_2T |
+#elif defined CONFIG_SUNXI_DRAM_DDR2
+	       MCTL_CR_DDR2 | MCTL_CR_2T |
+#elif defined CONFIG_SUNXI_DRAM_LPDDR3
+	       MCTL_CR_LPDDR3 | MCTL_CR_1T |
+#else
+#error Unsupported DRAM type!
+#endif
+	       (para->ranks[0].bank_bits == 3 ? MCTL_CR_EIGHT_BANKS : MCTL_CR_FOUR_BANKS) |
+	       MCTL_CR_BUS_FULL_WIDTH(para->bus_full_width) |
+	       (para->dual_rank ? MCTL_CR_DUAL_RANK : MCTL_CR_SINGLE_RANK) |
+	       MCTL_CR_PAGE_SIZE(para->ranks[0].page_size) |
+	       MCTL_CR_ROW_BITS(para->ranks[0].row_bits), &mctl_com->cr);
+
+	if (para->dual_rank && (socid == SOCID_A64 || socid == SOCID_R40)) {
+		writel((para->ranks[1].bank_bits == 3 ? MCTL_CR_EIGHT_BANKS : MCTL_CR_FOUR_BANKS) |
+		       MCTL_CR_BUS_FULL_WIDTH(para->bus_full_width) |
+		       MCTL_CR_DUAL_RANK |
+		       MCTL_CR_PAGE_SIZE(para->ranks[1].page_size) |
+		       MCTL_CR_ROW_BITS(para->ranks[1].row_bits), &mctl_com->cr_r1);
+	}
+
+	if (socid == SOCID_R40) {
+		/* Mux pin to A15 address line for single rank memory. */
+		if (!para->dual_rank)
+			setbits_le32(&mctl_com->cr_r1, MCTL_CR_R1_MUX_A15);
+	}
+}
+
+static void mctl_sys_init(uint16_t socid, struct dram_para *para)
+{
+	struct sunxi_ccm_reg * const ccm =
+			(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	clrbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
+	clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+	clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+	clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+	clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+	if (socid == SOCID_A64 || socid == SOCID_R40)
+		clrbits_le32(&ccm->pll11_cfg, CCM_PLL11_CTRL_EN);
+	udelay(10);
+
+	clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
+	udelay(1000);
+
+	if (socid == SOCID_A64 || socid == SOCID_R40) {
+		clock_set_pll11(CONFIG_DRAM_CLK * 2 * 1000000, false);
+		clrsetbits_le32(&ccm->dram_clk_cfg,
+				CCM_DRAMCLK_CFG_DIV_MASK |
+				CCM_DRAMCLK_CFG_SRC_MASK,
+				CCM_DRAMCLK_CFG_DIV(1) |
+				CCM_DRAMCLK_CFG_SRC_PLL11 |
+				CCM_DRAMCLK_CFG_UPD);
+	} else if (socid == SOCID_H3 || socid == SOCID_H5 || socid == SOCID_V3S) {
+		clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false);
+		clrsetbits_le32(&ccm->dram_clk_cfg,
+				CCM_DRAMCLK_CFG_DIV_MASK |
+				CCM_DRAMCLK_CFG_SRC_MASK,
+				CCM_DRAMCLK_CFG_DIV(1) |
+				CCM_DRAMCLK_CFG_SRC_PLL5 |
+				CCM_DRAMCLK_CFG_UPD);
+	}
+	mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+	setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+	setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
+
+	setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
+	udelay(10);
+
+	writel(socid == SOCID_H5 ? 0x8000 : 0xc00e, &mctl_ctl->clken);
+	udelay(500);
+}
+
+/* These are more guessed based on some Allwinner code. */
+#define DX_GCR_ODT_DYNAMIC	(0x0 << 4)
+#define DX_GCR_ODT_ALWAYS_ON	(0x1 << 4)
+#define DX_GCR_ODT_OFF		(0x2 << 4)
+
+static int mctl_channel_init(uint16_t socid, struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	unsigned int i;
+
+	mctl_set_cr(socid, para);
+	mctl_set_timing_params(socid, para);
+	mctl_set_master_priority(socid);
+
+	/* setting VTC, default disable all VT */
+	clrbits_le32(&mctl_ctl->pgcr[0], (1 << 30) | 0x3f);
+	if (socid == SOCID_H5)
+		setbits_le32(&mctl_ctl->pgcr[1], (1 << 24) | (1 << 26));
+	else
+		clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
+
+	/* increase DFI_PHY_UPD clock */
+	writel(PROTECT_MAGIC, &mctl_com->protect);
+	udelay(100);
+	clrsetbits_le32(&mctl_ctl->upd2, 0xfff << 16, 0x50 << 16);
+	writel(0x0, &mctl_com->protect);
+	udelay(100);
+
+	/* set dramc odt */
+	for (i = 0; i < 4; i++) {
+		u32 clearmask = (0x3 << 4) | (0x1 << 1) | (0x3 << 2) |
+				(0x3 << 12) | (0x3 << 14);
+		u32 setmask = IS_ENABLED(CONFIG_DRAM_ODT_EN) ?
+				DX_GCR_ODT_DYNAMIC : DX_GCR_ODT_OFF;
+
+		if (socid == SOCID_H5) {
+			clearmask |= 0x2 << 8;
+			setmask |= 0x4 << 8;
+		}
+		clrsetbits_le32(&mctl_ctl->dx[i].gcr, clearmask, setmask);
+	}
+
+	/* AC PDR should always ON */
+	clrsetbits_le32(&mctl_ctl->aciocr, socid == SOCID_H5 ? (0x1 << 11) : 0,
+			0x1 << 1);
+
+	/* set DQS auto gating PD mode */
+	setbits_le32(&mctl_ctl->pgcr[2], 0x3 << 6);
+
+	if (socid == SOCID_H3) {
+		/* dx ddr_clk & hdr_clk dynamic mode */
+		clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
+
+		/* dphy & aphy phase select 270 degree */
+		clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
+				(0x1 << 10) | (0x2 << 8));
+	} else if (socid == SOCID_V3S) {
+		/* dx ddr_clk & hdr_clk dynamic mode */
+		clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
+
+		/* dphy & aphy phase select 270 degree */
+		clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
+				(0x1 << 10) | (0x1 << 8));
+	} else if (socid == SOCID_A64 || socid == SOCID_H5) {
+		/* dphy & aphy phase select ? */
+		clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
+				(0x0 << 10) | (0x3 << 8));
+	} else if (socid == SOCID_R40) {
+		/* dx ddr_clk & hdr_clk dynamic mode (tpr13[9] == 0) */
+		clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
+
+		/* dphy & aphy phase select ? */
+		clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
+				(0x0 << 10) | (0x3 << 8));
+	}
+
+	/* set half DQ */
+	if (!para->bus_full_width) {
+#if defined CONFIG_SUNXI_DRAM_DW_32BIT
+		writel(0x0, &mctl_ctl->dx[2].gcr);
+		writel(0x0, &mctl_ctl->dx[3].gcr);
+#elif defined CONFIG_SUNXI_DRAM_DW_16BIT
+		writel(0x0, &mctl_ctl->dx[1].gcr);
+#else
+#error Unsupported DRAM bus width!
+#endif
+	}
+
+	/* data training configuration */
+	clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24,
+			(para->dual_rank ? 0x3 : 0x1) << 24);
+
+	mctl_set_bit_delays(para);
+	udelay(50);
+
+	if (socid == SOCID_V3S) {
+		mctl_v3s_zq_calibration_quirk(para);
+
+		mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
+			      PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
+	} else if (socid == SOCID_H3) {
+		mctl_h3_zq_calibration_quirk(para);
+
+		mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
+			      PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
+	} else if (socid == SOCID_A64 || socid == SOCID_H5) {
+		clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
+
+		mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
+			      PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
+		/* no PIR_QSGATE for H5 ???? */
+	} else if (socid == SOCID_R40) {
+		clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
+
+		mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
+			      PIR_DRAMRST | PIR_DRAMINIT);
+	}
+
+	/* detect ranks and bus width */
+	if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20)) {
+		/* only one rank */
+		if (((readl(&mctl_ctl->dx[0].gsr[0]) >> 24) & 0x2)
+#if defined CONFIG_SUNXI_DRAM_DW_32BIT
+		    || ((readl(&mctl_ctl->dx[1].gsr[0]) >> 24) & 0x2)
+#endif
+		    ) {
+			clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, 0x1 << 24);
+			para->dual_rank = 0;
+		}
+
+		/* only half DQ width */
+#if defined CONFIG_SUNXI_DRAM_DW_32BIT
+		if (((readl(&mctl_ctl->dx[2].gsr[0]) >> 24) & 0x1) ||
+		    ((readl(&mctl_ctl->dx[3].gsr[0]) >> 24) & 0x1)) {
+			writel(0x0, &mctl_ctl->dx[2].gcr);
+			writel(0x0, &mctl_ctl->dx[3].gcr);
+			para->bus_full_width = 0;
+		}
+#elif defined CONFIG_SUNXI_DRAM_DW_16BIT
+		if ((readl(&mctl_ctl->dx[1].gsr[0]) >> 24) & 0x1) {
+			writel(0x0, &mctl_ctl->dx[1].gcr);
+			para->bus_full_width = 0;
+		}
+#endif
+
+		mctl_set_cr(socid, para);
+		udelay(20);
+
+		/* re-train */
+		mctl_phy_init(PIR_QSGATE);
+		if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20))
+			return 1;
+	}
+
+	/* check the dramc status */
+	mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
+
+	/* liuke added for refresh debug */
+	setbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
+	udelay(10);
+	clrbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
+	udelay(10);
+
+	/* set PGCR3, CKE polarity */
+	if (socid == SOCID_H3 || socid == SOCID_V3S)
+		writel(0x00aa0060, &mctl_ctl->pgcr[3]);
+	else if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40)
+		writel(0xc0aa0060, &mctl_ctl->pgcr[3]);
+
+	/* power down zq calibration module for power save */
+	setbits_le32(&mctl_ctl->zqcr, ZQCR_PWRDOWN);
+
+	/* enable master access */
+	writel(0xffffffff, &mctl_com->maer);
+
+	return 0;
+}
+
+/*
+ * Test if memory at offset offset matches memory at a certain base
+ */
+static bool mctl_mem_matches_base(u32 offset, ulong base)
+{
+	/* Try to write different values to RAM at two addresses */
+	writel(0, base);
+	writel(0xaa55aa55, base + offset);
+	dsb();
+	/* Check if the same value is actually observed when reading back */
+	return readl(base) ==
+	       readl(base + offset);
+}
+
+static void mctl_auto_detect_dram_size_rank(uint16_t socid, struct dram_para *para, ulong base, struct rank_para *rank)
+{
+	/* detect row address bits */
+	rank->page_size = 512;
+	rank->row_bits = 16;
+	rank->bank_bits = 2;
+	mctl_set_cr(socid, para);
+
+	for (rank->row_bits = 11; rank->row_bits < 16; rank->row_bits++)
+		if (mctl_mem_matches_base((1 << (rank->row_bits + rank->bank_bits)) * rank->page_size, base))
+			break;
+
+	/* detect bank address bits */
+	rank->bank_bits = 3;
+	mctl_set_cr(socid, para);
+
+	for (rank->bank_bits = 2; rank->bank_bits < 3; rank->bank_bits++)
+		if (mctl_mem_matches_base((1 << rank->bank_bits) * rank->page_size, base))
+			break;
+
+	/* detect page size */
+	rank->page_size = 8192;
+	mctl_set_cr(socid, para);
+
+	for (rank->page_size = 512; rank->page_size < 8192; rank->page_size *= 2)
+		if (mctl_mem_matches_base(rank->page_size, base))
+			break;
+}
+
+static unsigned long mctl_calc_rank_size(struct rank_para *rank)
+{
+	return (1UL << (rank->row_bits + rank->bank_bits)) * rank->page_size;
+}
+
+/*
+ * Because we cannot do mctl_phy_init(PIR_QSGATE) on R40 now (which leads
+ * to failure), it's needed to detect the rank count of R40 in another way.
+ *
+ * The code here is modelled after time_out_detect() in BSP, which tries to
+ * access the memory and check for error code.
+ *
+ * TODO: auto detect half DQ width here
+ */
+static void mctl_r40_detect_rank_count(struct dram_para *para)
+{
+	ulong rank1_base = (ulong) CONFIG_SYS_SDRAM_BASE +
+			   mctl_calc_rank_size(&para->ranks[0]);
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	/* Enable read time out */
+	setbits_le32(&mctl_ctl->pgcr[0], 0x1 << 25);
+
+	(void) readl((void *) rank1_base);
+	udelay(10);
+
+	if (readl(&mctl_ctl->pgsr[0]) & (0x1 << 13)) {
+		clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, 0x1 << 24);
+		para->dual_rank = 0;
+	}
+
+	/* Reset PHY FIFO to clear it */
+	clrbits_le32(&mctl_ctl->pgcr[0], 0x1 << 26);
+	udelay(100);
+	setbits_le32(&mctl_ctl->pgcr[0], 0x1 << 26);
+
+	/* Clear error status */
+	setbits_le32(&mctl_ctl->pgcr[0], 0x1 << 24);
+
+	/* Clear time out flag */
+	clrbits_le32(&mctl_ctl->pgsr[0], 0x1 << 13);
+
+	/* Disable read time out */
+	clrbits_le32(&mctl_ctl->pgcr[0], 0x1 << 25);
+}
+
+static void mctl_auto_detect_dram_size(uint16_t socid, struct dram_para *para)
+{
+	mctl_auto_detect_dram_size_rank(socid, para, (ulong)CONFIG_SYS_SDRAM_BASE, &para->ranks[0]);
+
+	if ((socid == SOCID_A64 || socid == SOCID_R40) && para->dual_rank) {
+		mctl_auto_detect_dram_size_rank(socid, para, (ulong)CONFIG_SYS_SDRAM_BASE + mctl_calc_rank_size(&para->ranks[0]), &para->ranks[1]);
+	}
+}
+
+/*
+ * The actual values used here are taken from Allwinner provided boot0
+ * binaries, though they are probably board specific, so would likely benefit
+ * from invidual tuning for each board. Apparently a lot of boards copy from
+ * some Allwinner reference design, so we go with those generic values for now
+ * in the hope that they are reasonable for most (all?) boards.
+ */
+#define SUN8I_H3_DX_READ_DELAYS					\
+	{{ 18, 18, 18, 18, 18, 18, 18, 18, 18,  0,  0 },	\
+	 { 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 },	\
+	 { 18, 18, 18, 18, 18, 18, 18, 18, 18,  0,  0 },	\
+	 { 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 }}
+#define SUN8I_H3_DX_WRITE_DELAYS				\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0, 10, 10 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0, 10, 10 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0, 10, 10 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  6 }}
+#define SUN8I_H3_AC_DELAYS					\
+	{  0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0      }
+
+#define SUN8I_V3S_DX_READ_DELAYS					\
+	{{  8,  8,  8,  8,  8,  8,  8,  8,  8,  0,  0 },	\
+	 {  7,  7,  7,  7,  7,  7,  7,  7,  7,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }}
+#define SUN8I_V3S_DX_WRITE_DELAYS				\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0,  4,  4 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  2,  2 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }}
+#define SUN8I_V3S_AC_DELAYS					\
+	{  0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0      }
+
+#define SUN8I_R40_DX_READ_DELAYS				\
+	{{ 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 },	\
+	 { 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 },	\
+	 { 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 },	\
+	 { 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 } }
+#define SUN8I_R40_DX_WRITE_DELAYS				\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  0 } }
+#define SUN8I_R40_AC_DELAYS					\
+	{  0,  0,  3,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0      }
+
+#define SUN50I_A64_DX_READ_DELAYS				\
+	{{ 16, 16, 16, 16, 17, 16, 16, 17, 16,  1,  0 },	\
+	 { 17, 17, 17, 17, 17, 17, 17, 17, 17,  1,  0 },	\
+	 { 16, 17, 17, 16, 16, 16, 16, 16, 16,  0,  0 },	\
+	 { 17, 17, 17, 17, 17, 17, 17, 17, 17,  1,  0 }}
+#define SUN50I_A64_DX_WRITE_DELAYS				\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0, 15, 15 },	\
+	 {  0,  0,  0,  0,  1,  1,  1,  1,  0, 10, 10 },	\
+	 {  1,  0,  1,  1,  1,  1,  1,  1,  0, 11, 11 },	\
+	 {  1,  0,  0,  1,  1,  1,  1,  1,  0, 12, 12 }}
+#define SUN50I_A64_AC_DELAYS					\
+	{  5,  5, 13, 10,  2,  5,  3,  3,			\
+	   0,  3,  3,  3,  1,  0,  0,  0,			\
+	   3,  4,  0,  3,  4,  1,  4,  0,			\
+	   1,  1,  0,  1, 13,  5,  4      }
+
+#define SUN8I_H5_DX_READ_DELAYS					\
+	{{ 14, 15, 17, 17, 17, 17, 17, 18, 17,  3,  3 },	\
+	 { 21, 21, 12, 22, 21, 21, 21, 21, 21,  3,  3 },	\
+	 { 16, 19, 19, 17, 22, 22, 21, 22, 19,  3,  3 },	\
+	 { 21, 21, 22, 22, 20, 21, 19, 19, 19,  3,  3 } }
+#define SUN8I_H5_DX_WRITE_DELAYS				\
+	{{  1,  2,  3,  4,  3,  4,  4,  4,  6,  6,  6 },	\
+	 {  6,  6,  6,  5,  5,  5,  5,  5,  6,  6,  6 },	\
+	 {  0,  2,  4,  2,  6,  5,  5,  5,  6,  6,  6 },	\
+	 {  3,  3,  3,  2,  2,  1,  1,  1,  4,  4,  4 } }
+#define SUN8I_H5_AC_DELAYS					\
+	{  0,  0,  5,  5,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  3,  3,  3,  3,			\
+	   3,  3,  3,  3,  3,  3,  3,  3,			\
+	   3,  3,  3,  3,  2,  0,  0      }
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	unsigned long size;
+
+	struct dram_para para = {
+		.dual_rank = 1,
+		.bus_full_width = 1,
+		.ranks = {
+			{
+				.row_bits = 15,
+				.bank_bits = 3,
+				.page_size = 4096,
+			},
+			{
+				.row_bits = 15,
+				.bank_bits = 3,
+				.page_size = 4096,
+			}
+		},
+
+#if defined(CONFIG_MACH_SUN8I_H3)
+		.dx_read_delays  = SUN8I_H3_DX_READ_DELAYS,
+		.dx_write_delays = SUN8I_H3_DX_WRITE_DELAYS,
+		.ac_delays	 = SUN8I_H3_AC_DELAYS,
+#elif defined(CONFIG_MACH_SUN8I_V3S)
+		.dx_read_delays  = SUN8I_V3S_DX_READ_DELAYS,
+		.dx_write_delays = SUN8I_V3S_DX_WRITE_DELAYS,
+		.ac_delays	 = SUN8I_V3S_AC_DELAYS,
+#elif defined(CONFIG_MACH_SUN8I_R40)
+		.dx_read_delays  = SUN8I_R40_DX_READ_DELAYS,
+		.dx_write_delays = SUN8I_R40_DX_WRITE_DELAYS,
+		.ac_delays	 = SUN8I_R40_AC_DELAYS,
+#elif defined(CONFIG_MACH_SUN50I)
+		.dx_read_delays  = SUN50I_A64_DX_READ_DELAYS,
+		.dx_write_delays = SUN50I_A64_DX_WRITE_DELAYS,
+		.ac_delays	 = SUN50I_A64_AC_DELAYS,
+#elif defined(CONFIG_MACH_SUN50I_H5)
+		.dx_read_delays  = SUN8I_H5_DX_READ_DELAYS,
+		.dx_write_delays = SUN8I_H5_DX_WRITE_DELAYS,
+		.ac_delays	 = SUN8I_H5_AC_DELAYS,
+#endif
+	};
+/*
+ * Let the compiler optimize alternatives away by passing this value into
+ * the static functions. This saves us #ifdefs, but still keeps the binary
+ * small.
+ */
+#if defined(CONFIG_MACH_SUN8I_H3)
+	uint16_t socid = SOCID_H3;
+#elif defined(CONFIG_MACH_SUN8I_R40)
+	uint16_t socid = SOCID_R40;
+#elif defined(CONFIG_MACH_SUN8I_V3S)
+	uint16_t socid = SOCID_V3S;
+#elif defined(CONFIG_MACH_SUN50I)
+	uint16_t socid = SOCID_A64;
+#elif defined(CONFIG_MACH_SUN50I_H5)
+	uint16_t socid = SOCID_H5;
+#endif
+
+	mctl_sys_init(socid, &para);
+	if (mctl_channel_init(socid, &para))
+		return 0;
+
+	if (para.dual_rank)
+		writel(0x00000303, &mctl_ctl->odtmap);
+	else
+		writel(0x00000201, &mctl_ctl->odtmap);
+	udelay(1);
+
+	/* odt delay */
+	if (socid == SOCID_H3)
+		writel(0x0c000400, &mctl_ctl->odtcfg);
+
+	if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40) {
+		/* VTF enable (tpr13[8] == 1) */
+		setbits_le32(&mctl_ctl->vtfcr,
+			     (socid != SOCID_A64 ? 3 : 2) << 8);
+		/* DQ hold disable (tpr13[26] == 1) */
+		clrbits_le32(&mctl_ctl->pgcr[2], (1 << 13));
+	}
+
+	/* clear credit value */
+	setbits_le32(&mctl_com->cccr, 1 << 31);
+	udelay(10);
+
+	if (socid == SOCID_R40) {
+		mctl_r40_detect_rank_count(&para);
+		mctl_set_cr(SOCID_R40, &para);
+	}
+
+	mctl_auto_detect_dram_size(socid, &para);
+	mctl_set_cr(socid, &para);
+
+	size = mctl_calc_rank_size(&para.ranks[0]);
+	if (socid == SOCID_A64 || socid == SOCID_R40) {
+		if (para.dual_rank)
+			size += mctl_calc_rank_size(&para.ranks[1]);
+	} else if (para.dual_rank) {
+		size *= 2;
+	}
+
+	return size;
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_timings/Makefile b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/Makefile
new file mode 100644
index 000000000..39a8756c2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_SUNXI_DRAM_DDR3_1333)	+= ddr3_1333.o
+obj-$(CONFIG_SUNXI_DRAM_LPDDR3_STOCK)	+= lpddr3_stock.o
+obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S)	+= ddr2_v3s.o
+obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3)	+= h6_lpddr3.o
+obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333)	+= h6_ddr3_1333.o
+# currently only DDR3 is supported on H616
+obj-$(CONFIG_MACH_SUN50I_H616)		+= h616_ddr3_1333.o
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_timings/ddr2_v3s.c b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/ddr2_v3s.c
new file mode 100644
index 000000000..9077f86a8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/ddr2_v3s.c
@@ -0,0 +1,84 @@
+#include <common.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+
+void mctl_set_timing_params(uint16_t socid, struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	u8 tccd		= 1;
+	u8 tfaw		= ns_to_t(50);
+	u8 trrd		= max(ns_to_t(10), 2);
+	u8 trcd		= ns_to_t(20);
+	u8 trc		= ns_to_t(65);
+	u8 txp		= 2;
+	u8 twtr		= max(ns_to_t(8), 2);
+	u8 trtp		= max(ns_to_t(8), 2);
+	u8 twr		= max(ns_to_t(15), 3);
+	u8 trp		= ns_to_t(15);
+	u8 tras		= ns_to_t(45);
+	u16 trefi	= ns_to_t(7800) / 32;
+	u16 trfc	= ns_to_t(328);
+
+	u8 tmrw		= 0;
+	u8 tmrd		= 2;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 4;
+	u8 trasmax	= 27;
+
+	u8 tcl		= 3; /* CL 6 */
+	u8 tcwl		= 3; /* CWL 6 */
+	u8 t_rdata_en	= 1;
+	u8 wr_latency	= 1;
+
+	u32 tdinit0	= (400 * CONFIG_DRAM_CLK) + 1;		/* 400us */
+	u32 tdinit1	= (500 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 500ns */
+	u32 tdinit2	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 2 + twr;	/* WL + BL / 2 + tWR */
+	u8 twr2rd	= tcwl + 2 + twtr;	/* WL + BL / 2 + tWTR */
+	u8 trd2wr	= tcl + 2 + 1 - tcwl;	/* RL + BL / 2 + 2 - WL */
+
+	/* set mode register */
+	writel(0x263, &mctl_ctl->mr[0]);
+	writel(0x4, &mctl_ctl->mr[1]);
+	writel(0x0, &mctl_ctl->mr[2]);
+	writel(0x0, &mctl_ctl->mr[3]);
+
+	/* set DRAM timing */
+	writel(DRAMTMG0_TWTP(twtp) | DRAMTMG0_TFAW(tfaw) |
+	       DRAMTMG0_TRAS_MAX(trasmax) | DRAMTMG0_TRAS(tras),
+	       &mctl_ctl->dramtmg[0]);
+	writel(DRAMTMG1_TXP(txp) | DRAMTMG1_TRTP(trtp) | DRAMTMG1_TRC(trc),
+	       &mctl_ctl->dramtmg[1]);
+	writel(DRAMTMG2_TCWL(tcwl) | DRAMTMG2_TCL(tcl) |
+	       DRAMTMG2_TRD2WR(trd2wr) | DRAMTMG2_TWR2RD(twr2rd),
+	       &mctl_ctl->dramtmg[2]);
+	writel(DRAMTMG3_TMRW(tmrw) | DRAMTMG3_TMRD(tmrd) | DRAMTMG3_TMOD(tmod),
+	       &mctl_ctl->dramtmg[3]);
+	writel(DRAMTMG4_TRCD(trcd) | DRAMTMG4_TCCD(tccd) | DRAMTMG4_TRRD(trrd) |
+	       DRAMTMG4_TRP(trp), &mctl_ctl->dramtmg[4]);
+	writel(DRAMTMG5_TCKSRX(tcksrx) | DRAMTMG5_TCKSRE(tcksre) |
+	       DRAMTMG5_TCKESR(tckesr) | DRAMTMG5_TCKE(tcke),
+	       &mctl_ctl->dramtmg[5]);
+
+	/* set two rank timing */
+	clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0),
+			(0x66 << 8) | (0x10 << 0));
+
+	/* set PHY interface timing, write latency and read latency configure */
+	writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) |
+	       (wr_latency << 0), &mctl_ctl->pitmg[0]);
+
+	/* set PHY timing, PTR0-2 use default */
+	writel(PTR3_TDINIT0(tdinit0) | PTR3_TDINIT1(tdinit1), &mctl_ctl->ptr[3]);
+	writel(PTR4_TDINIT2(tdinit2) | PTR4_TDINIT3(tdinit3), &mctl_ctl->ptr[4]);
+
+	/* set refresh timing */
+	writel(RFSHTMG_TREFI(trefi) | RFSHTMG_TRFC(trfc), &mctl_ctl->rfshtmg);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_timings/ddr3_1333.c b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/ddr3_1333.c
new file mode 100644
index 000000000..0471e8a49
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/ddr3_1333.c
@@ -0,0 +1,87 @@
+#include <common.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+
+void mctl_set_timing_params(uint16_t socid, struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	u8 tccd		= 2;
+	u8 tfaw		= ns_to_t(50);
+	u8 trrd		= max(ns_to_t(10), 4);
+	u8 trcd		= ns_to_t(15);
+	u8 trc		= ns_to_t(53);
+	u8 txp		= max(ns_to_t(8), 3);
+	u8 twtr		= max(ns_to_t(8), 4);
+	u8 trtp		= max(ns_to_t(8), 4);
+	u8 twr		= max(ns_to_t(15), 3);
+	u8 trp		= ns_to_t(15);
+	u8 tras		= ns_to_t(38);
+	u16 trefi	= ns_to_t(7800) / 32;
+	u16 trfc	= ns_to_t(350);
+
+	u8 tmrw		= 0;
+	u8 tmrd		= 4;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 4;
+	u8 trasmax	= 24;
+
+	u8 tcl		= 6; /* CL 12 */
+	u8 tcwl		= 4; /* CWL 8 */
+	u8 t_rdata_en	= 4;
+	u8 wr_latency	= 2;
+
+	u32 tdinit0	= (500 * CONFIG_DRAM_CLK) + 1;		/* 500us */
+	u32 tdinit1	= (360 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 360ns */
+	u32 tdinit2	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 2 + twr;	/* WL + BL / 2 + tWR */
+	u8 twr2rd	= tcwl + 2 + twtr;	/* WL + BL / 2 + tWTR */
+	u8 trd2wr	= tcl + 2 + 1 - tcwl;	/* RL + BL / 2 + 2 - WL */
+
+	/* set mode register */
+	writel(0x1c70, &mctl_ctl->mr[0]);	/* CL=11, WR=12 */
+	writel(0x40, &mctl_ctl->mr[1]);
+	writel(0x18, &mctl_ctl->mr[2]);		/* CWL=8 */
+	writel(0x0, &mctl_ctl->mr[3]);
+
+	if (socid == SOCID_R40)
+		writel(0x3, &mctl_ctl->lp3mr11);	/* odt_en[7:4] */
+
+	/* set DRAM timing */
+	writel(DRAMTMG0_TWTP(twtp) | DRAMTMG0_TFAW(tfaw) |
+	       DRAMTMG0_TRAS_MAX(trasmax) | DRAMTMG0_TRAS(tras),
+	       &mctl_ctl->dramtmg[0]);
+	writel(DRAMTMG1_TXP(txp) | DRAMTMG1_TRTP(trtp) | DRAMTMG1_TRC(trc),
+	       &mctl_ctl->dramtmg[1]);
+	writel(DRAMTMG2_TCWL(tcwl) | DRAMTMG2_TCL(tcl) |
+	       DRAMTMG2_TRD2WR(trd2wr) | DRAMTMG2_TWR2RD(twr2rd),
+	       &mctl_ctl->dramtmg[2]);
+	writel(DRAMTMG3_TMRW(tmrw) | DRAMTMG3_TMRD(tmrd) | DRAMTMG3_TMOD(tmod),
+	       &mctl_ctl->dramtmg[3]);
+	writel(DRAMTMG4_TRCD(trcd) | DRAMTMG4_TCCD(tccd) | DRAMTMG4_TRRD(trrd) |
+	       DRAMTMG4_TRP(trp), &mctl_ctl->dramtmg[4]);
+	writel(DRAMTMG5_TCKSRX(tcksrx) | DRAMTMG5_TCKSRE(tcksre) |
+	       DRAMTMG5_TCKESR(tckesr) | DRAMTMG5_TCKE(tcke),
+	       &mctl_ctl->dramtmg[5]);
+
+	/* set two rank timing */
+	clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0),
+			((socid == SOCID_H5 ? 0x33 : 0x66) << 8) | (0x10 << 0));
+
+	/* set PHY interface timing, write latency and read latency configure */
+	writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) |
+	       (wr_latency << 0), &mctl_ctl->pitmg[0]);
+
+	/* set PHY timing, PTR0-2 use default */
+	writel(PTR3_TDINIT0(tdinit0) | PTR3_TDINIT1(tdinit1), &mctl_ctl->ptr[3]);
+	writel(PTR4_TDINIT2(tdinit2) | PTR4_TDINIT3(tdinit3), &mctl_ctl->ptr[4]);
+
+	/* set refresh timing */
+	writel(RFSHTMG_TREFI(trefi) | RFSHTMG_TRFC(trfc), &mctl_ctl->rfshtmg);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c
new file mode 100644
index 000000000..8f508344b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c
@@ -0,0 +1,94 @@
+/*
+ * sun50i H616 DDR3-1333 timings, as programmed by Allwinner's boot0
+ *
+ * The chips are probably able to be driven by a faster clock, but boot0
+ * uses a more conservative timing (as usual).
+ *
+ * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec@siol.net>
+ * Based on H6 DDR3 timings:
+ * (C) Copyright 2018,2019 Arm Ltd.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+
+void mctl_set_timing_params(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	u8 tccd		= 2;			/* JEDEC: 4nCK */
+	u8 tfaw		= ns_to_t(50);		/* JEDEC: 30 ns w/ 1K pages */
+	u8 trrd		= max(ns_to_t(6), 4);	/* JEDEC: max(6 ns, 4nCK) */
+	u8 trcd		= ns_to_t(15);		/* JEDEC: 13.5 ns */
+	u8 trc		= ns_to_t(53);		/* JEDEC: 49.5 ns */
+	u8 txp		= max(ns_to_t(6), 3);	/* JEDEC: max(6 ns, 3nCK) */
+	u8 trtp		= max(ns_to_t(8), 2);	/* JEDEC: max(7.5 ns, 4nCK) */
+	u8 trp		= ns_to_t(15);		/* JEDEC: >= 13.75 ns */
+	u8 tras		= ns_to_t(38);		/* JEDEC >= 36 ns, <= 9*trefi */
+	u16 trefi	= ns_to_t(7800) / 32;	/* JEDEC: 7.8us@Tcase <= 85C */
+	u16 trfc	= ns_to_t(350);		/* JEDEC: 160 ns for 2Gb */
+	u16 txsr	= 4;			/* ? */
+
+	u8 tmrw		= 0;			/* ? */
+	u8 tmrd		= 4;			/* JEDEC: 4nCK */
+	u8 tmod		= max(ns_to_t(15), 12);	/* JEDEC: max(15 ns, 12nCK) */
+	u8 tcke		= max(ns_to_t(6), 3);	/* JEDEC: max(5.625 ns, 3nCK) */
+	u8 tcksrx	= max(ns_to_t(10), 4);	/* JEDEC: max(10 ns, 5nCK) */
+	u8 tcksre	= max(ns_to_t(10), 4);	/* JEDEC: max(10 ns, 5nCK) */
+	u8 tckesr	= tcke + 1;		/* JEDEC: tCKE(min) + 1nCK */
+	u8 trasmax	= (para->clk / 2) / 15;	/* JEDEC: tREFI * 9 */
+	u8 txs		= ns_to_t(360) / 32;	/* JEDEC: max(5nCK,tRFC+10ns) */
+	u8 txsdll	= 16;			/* JEDEC: 512 nCK */
+	u8 txsabort	= 4;			/* ? */
+	u8 txsfast	= 4;			/* ? */
+	u8 tcl		= 7;			/* JEDEC: CL / 2 => 6 */
+	u8 tcwl		= 5;			/* JEDEC: 8 */
+	u8 t_rdata_en	= 9;			/* ? */
+
+	u8 twtp		= 14;			/* (WL + BL / 2 + tWR) / 2 */
+	u8 twr2rd	= trtp + 7;		/* (WL + BL / 2 + tWTR) / 2 */
+	u8 trd2wr	= 5;			/* (RL + BL / 2 + 2 - WL) / 2 */
+
+	/* set DRAM timing */
+	writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
+	       &mctl_ctl->dramtmg[0]);
+	writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
+	writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
+	       &mctl_ctl->dramtmg[2]);
+	writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
+	writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
+	       &mctl_ctl->dramtmg[4]);
+	writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
+	       &mctl_ctl->dramtmg[5]);
+	/* Value suggested by ZynqMP manual and used by libdram */
+	writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
+	writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
+	       &mctl_ctl->dramtmg[8]);
+	writel(0x00020208, &mctl_ctl->dramtmg[9]);
+	writel(0xE0C05, &mctl_ctl->dramtmg[10]);
+	writel(0x440C021C, &mctl_ctl->dramtmg[11]);
+	writel(8, &mctl_ctl->dramtmg[12]);
+	writel(0xA100002, &mctl_ctl->dramtmg[13]);
+	writel(txsr, &mctl_ctl->dramtmg[14]);
+
+	clrbits_le32(&mctl_ctl->init[0], 3 << 30);
+	writel(0x420000, &mctl_ctl->init[1]);
+	writel(5, &mctl_ctl->init[2]);
+	writel(0x1f140004, &mctl_ctl->init[3]);
+	writel(0x00200000, &mctl_ctl->init[4]);
+
+	writel(0, &mctl_ctl->dfimisc);
+	clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
+
+	/* Configure DFI timing */
+	writel((tcl - 2) | 0x2000000 | (t_rdata_en << 16) | 0x808000,
+	       &mctl_ctl->dfitmg0);
+	writel(0x100202, &mctl_ctl->dfitmg1);
+
+	/* set refresh timing */
+	writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h6_ddr3_1333.c b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h6_ddr3_1333.c
new file mode 100644
index 000000000..611eaa302
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h6_ddr3_1333.c
@@ -0,0 +1,144 @@
+/*
+ * sun50i H6 DDR3-1333 timings, as programmed by Allwinner's boot0
+ * for some TV boxes with the H6 and DDR3 memory.
+ *
+ * The chips are probably able to be driven by a faster clock, but boot0
+ * uses a more conservative timing (as usual).
+ *
+ * (C) Copyright 2018,2019 Arm Ltd.
+ *   based on previous work by:
+ *   (C) Copyright 2017      Icenowy Zheng <icenowy@aosc.io>
+ *
+ * References used:
+ * - JEDEC DDR3 SDRAM standard:	JESD79-3F.pdf
+ * - Samsung K4B2G0446D datasheet
+ * - ZynqMP UG1087 register DDRC/PHY documentation
+ *
+ * Many thanks to Jernej Skrabec for contributing some fixes!
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+
+/*
+ * Only the first four are used for DDR3(?)
+ * MR0: BL8, seq. read burst, no test, fast exit (DLL on), no DLL reset,
+ *	CAS latency (CL): 11, write recovery (WR): 12
+ * MR1: DLL enabled, output strength RZQ/6, Rtt_norm RZQ/2,
+ *	write levelling disabled, TDQS disabled, output buffer enabled
+ * MR2: manual full array self refresh, dynamic ODT off,
+ * 	CAS write latency (CWL): 8
+ */
+static u32 mr_ddr3[7] = {
+	0x00001c70, 0x00000040, 0x00000018, 0x00000000,
+	0x00000000, 0x00000400, 0x00000848,
+};
+
+/* TODO: flexible timing */
+void mctl_set_timing_params(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	int i;
+
+	u8 tccd		= 2;			/* JEDEC: 4nCK */
+	u8 tfaw		= ns_to_t(50);		/* JEDEC: 30 ns w/ 1K pages */
+	u8 trrd		= max(ns_to_t(6), 4);	/* JEDEC: max(6 ns, 4nCK) */
+	u8 trcd		= ns_to_t(15);		/* JEDEC: 13.5 ns */
+	u8 trc		= ns_to_t(53);		/* JEDEC: 49.5 ns */
+	u8 txp		= max(ns_to_t(6), 3);	/* JEDEC: max(6 ns, 3nCK) */
+	u8 twtr		= max(ns_to_t(8), 2);	/* JEDEC: max(7.5 ns, 4nCK) */
+	u8 trtp		= max(ns_to_t(8), 2);	/* JEDEC: max(7.5 ns, 4nCK) */
+	u8 twr		= ns_to_t(15);		/* JEDEC: 15 ns */
+	u8 trp		= ns_to_t(15);		/* JEDEC: >= 13.75 ns */
+	u8 tras		= ns_to_t(38);		/* JEDEC >= 36 ns, <= 9*trefi */
+	u8 twtr_sa	= 2;			/* ? */
+	u8 tcksrea	= 4;			/* ? */
+	u16 trefi	= ns_to_t(7800) / 32;	/* JEDEC: 7.8us@Tcase <= 85C */
+	u16 trfc	= ns_to_t(350);		/* JEDEC: 160 ns for 2Gb */
+	u16 txsr	= 4;			/* ? */
+
+	u8 tmrw		= 0;			/* ? */
+	u8 tmrd		= 4;			/* JEDEC: 4nCK */
+	u8 tmod		= max(ns_to_t(15), 12);	/* JEDEC: max(15 ns, 12nCK) */
+	u8 tcke		= max(ns_to_t(6), 3);	/* JEDEC: max(5.625 ns, 3nCK) */
+	u8 tcksrx	= max(ns_to_t(10), 5);	/* JEDEC: max(10 ns, 5nCK) */
+	u8 tcksre	= max(ns_to_t(10), 5);	/* JEDEC: max(10 ns, 5nCK) */
+	u8 tckesr	= tcke + 1;		/* JEDEC: tCKE(min) + 1nCK */
+	u8 trasmax	= 24;			/* JEDEC: tREFI * 9 */
+	u8 txs		= ns_to_t(360) / 32;	/* JEDEC: max(5nCK,tRFC+10ns) */
+	u8 txsdll	= 4;			/* JEDEC: 512 nCK */
+	u8 txsabort	= 4;			/* ? */
+	u8 txsfast	= 4;			/* ? */
+	u8 tcl		= 6;			/* JEDEC: CL / 2 => 6 */
+	u8 tcwl		= 4;			/* JEDEC: 8 */
+	u8 t_rdata_en	= 7;			/* ? */
+
+	u32 tdinit0	= (500 * CONFIG_DRAM_CLK) + 1;	/* 500us */
+	u32 tdinit1	= (360 * CONFIG_DRAM_CLK) / 1000 + 1;
+	u32 tdinit2	= (200 * CONFIG_DRAM_CLK) + 1;
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;	/* 1us */
+
+	u8 twtp		= tcwl + 2 + twr;	/* (WL + BL / 2 + tWR) / 2 */
+	u8 twr2rd	= tcwl + 2 + twtr;	/* (WL + BL / 2 + tWTR) / 2 */
+	u8 trd2wr	= 5;			/* (RL + BL / 2 + 2 - WL) / 2 */
+
+	if (tcl + 1 >= trtp + trp)
+		trtp = tcl + 2 - trp;
+
+	/* set mode registers */
+	for (i = 0; i < ARRAY_SIZE(mr_ddr3); i++)
+		writel(mr_ddr3[i], &mctl_phy->mr[i]);
+
+	/* set DRAM timing */
+	writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
+	       &mctl_ctl->dramtmg[0]);
+	writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
+	writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
+	       &mctl_ctl->dramtmg[2]);
+	writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
+	writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
+	       &mctl_ctl->dramtmg[4]);
+	writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
+	       &mctl_ctl->dramtmg[5]);
+	/* Value suggested by ZynqMP manual and used by libdram */
+	writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
+	writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
+	       &mctl_ctl->dramtmg[8]);
+	writel(txsr, &mctl_ctl->dramtmg[14]);
+
+	clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30));
+	writel(0, &mctl_ctl->dfimisc);
+	clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
+
+	/*
+	 * Set timing registers of the PHY.
+	 * Note: the PHY is clocked 2x from the DRAM frequency.
+	 */
+	writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1),
+	       &mctl_phy->dtpr[0]);
+	writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]);
+	writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]);
+	writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8),
+	       &mctl_phy->dtpr[3]);
+	writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]);
+	writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]);
+	writel(0x0505, &mctl_phy->dtpr[6]);
+
+	/* Configure DFI timing */
+	writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000,
+	       &mctl_ctl->dfitmg0);
+	writel(0x040201, &mctl_ctl->dfitmg1);
+
+	/* Configure PHY timing. Zynq uses different registers. */
+	writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]);
+	writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]);
+
+	/* set refresh timing */
+	writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h6_lpddr3.c b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h6_lpddr3.c
new file mode 100644
index 000000000..100086011
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/h6_lpddr3.c
@@ -0,0 +1,132 @@
+/*
+ * sun50i H6 LPDDR3 timings
+ *
+ * (C) Copyright 2017      Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+
+static u32 mr_lpddr3[12] = {
+	0x00000000, 0x00000043, 0x0000001a, 0x00000001,
+	0x00000000, 0x00000000, 0x00000048, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000003,
+};
+
+/* TODO: flexible timing */
+void mctl_set_timing_params(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	int i;
+
+	u8 tccd		= 2;
+	u8 tfaw		= max(ns_to_t(50), 4);
+	u8 trrd		= max(ns_to_t(10), 2);
+	u8 trcd		= max(ns_to_t(24), 2);
+	u8 trc		= ns_to_t(70);
+	u8 txp		= max(ns_to_t(8), 2);
+	u8 twtr		= max(ns_to_t(8), 2);
+	u8 trtp		= max(ns_to_t(8), 2);
+	u8 twr		= max(ns_to_t(15), 2);
+	u8 trp		= ns_to_t(18);
+	u8 tras		= ns_to_t(42);
+	u8 twtr_sa	= ns_to_t(5);
+	u8 tcksrea	= ns_to_t(11);
+	u16 trefi	= ns_to_t(3900) / 32;
+	u16 trfc	= ns_to_t(210);
+	u16 txsr	= ns_to_t(220);
+
+	if (CONFIG_DRAM_CLK % 400 == 0) {
+		/* Round up these parameters */
+		twtr_sa++;
+		tcksrea++;
+	}
+
+	u8 tmrw		= 5;
+	u8 tmrd		= 5;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 5;
+	u8 trasmax	= CONFIG_DRAM_CLK / 60;
+	u8 txs		= 4;
+	u8 txsdll	= 4;
+	u8 txsabort	= 4;
+	u8 txsfast	= 4;
+
+	u8 tcl		= 5; /* CL 10 */
+	u8 tcwl		= 3; /* CWL 6 */
+	u8 t_rdata_en	= twtr_sa + 8;
+
+	u32 tdinit0	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit1	= (100 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 100ns */
+	u32 tdinit2	= (11 * CONFIG_DRAM_CLK) + 1;		/* 11us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 4 + twr + 1;
+	/*
+	 * The code below for twr2rd and trd2wr follows the IP core's
+	 * document from ZynqMP and i.MX7. The BSP has both number
+	 * substracted by 2.
+	 */
+	u8 twr2rd	= tcwl + 4 + 1 + twtr;
+	u8 trd2wr	= tcl + 4 + (tcksrea >> 1) - tcwl + 1;
+
+	/* set mode registers */
+	for (i = 0; i < ARRAY_SIZE(mr_lpddr3); i++)
+		writel(mr_lpddr3[i], &mctl_phy->mr[i]);
+
+	/* set DRAM timing */
+	writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
+	       &mctl_ctl->dramtmg[0]);
+	writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
+	writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
+	       &mctl_ctl->dramtmg[2]);
+	writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
+	writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
+	       &mctl_ctl->dramtmg[4]);
+	writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
+	       &mctl_ctl->dramtmg[5]);
+	/* Value suggested by ZynqMP manual and used by libdram */
+	writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
+	writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
+	       &mctl_ctl->dramtmg[8]);
+	writel(txsr, &mctl_ctl->dramtmg[14]);
+
+	clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30));
+	writel(0, &mctl_ctl->dfimisc);
+	clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
+
+	/*
+	 * Set timing registers of the PHY.
+	 * Note: the PHY is clocked 2x from the DRAM frequency.
+	 */
+	writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1),
+	       &mctl_phy->dtpr[0]);
+	writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]);
+	writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]);
+	writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8),
+	       &mctl_phy->dtpr[3]);
+	writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]);
+	writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]);
+	writel(0x0505, &mctl_phy->dtpr[6]);
+
+	/* Configure DFI timing */
+	writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000,
+	       &mctl_ctl->dfitmg0);
+	writel(0x040201, &mctl_ctl->dfitmg1);
+
+	/* Configure PHY timing */
+	writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]);
+	writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]);
+
+	/* set refresh timing */
+	writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c
new file mode 100644
index 000000000..bd57e2f6a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c
@@ -0,0 +1,83 @@
+#include <common.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+
+void mctl_set_timing_params(uint16_t socid, struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	u8 tccd		= 2;
+	u8 tfaw		= max(ns_to_t(50), 4);
+	u8 trrd		= max(ns_to_t(10), 2);
+	u8 trcd		= max(ns_to_t(24), 2);
+	u8 trc		= ns_to_t(70);
+	u8 txp		= max(ns_to_t(8), 2);
+	u8 twtr		= max(ns_to_t(8), 2);
+	u8 trtp		= max(ns_to_t(8), 2);
+	u8 twr		= max(ns_to_t(15), 3);
+	u8 trp		= max(ns_to_t(27), 2);
+	u8 tras		= ns_to_t(42);
+	u16 trefi	= ns_to_t(3900) / 32;
+	u16 trfc	= ns_to_t(210);
+
+	u8 tmrw		= 5;
+	u8 tmrd		= 5;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 5;
+	u8 trasmax	= 24;
+
+	u8 tcl		= 6; /* CL 12 */
+	u8 tcwl		= 3; /* CWL 6 */
+	u8 t_rdata_en	= 5;
+	u8 wr_latency	= 2;
+
+	u32 tdinit0	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit1	= (100 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 100ns */
+	u32 tdinit2	= (11 * CONFIG_DRAM_CLK) + 1;		/* 11us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 4 + twr + 1;
+	u8 twr2rd	= tcwl + 4 + 1 + twtr;
+	u8 trd2wr	= tcl + 4 + 5 - tcwl + 1;
+
+	/* set mode register */
+	writel(0xc3, &mctl_ctl->mr[1]);		/* nWR=8, BL8 */
+	writel(0xa, &mctl_ctl->mr[2]);		/* RL=12, WL=6 */
+	writel(0x2, &mctl_ctl->mr[3]);		/* 40 0hms PD/PU */
+
+	/* set DRAM timing */
+	writel(DRAMTMG0_TWTP(twtp) | DRAMTMG0_TFAW(tfaw) |
+	       DRAMTMG0_TRAS_MAX(trasmax) | DRAMTMG0_TRAS(tras),
+	       &mctl_ctl->dramtmg[0]);
+	writel(DRAMTMG1_TXP(txp) | DRAMTMG1_TRTP(trtp) | DRAMTMG1_TRC(trc),
+	       &mctl_ctl->dramtmg[1]);
+	writel(DRAMTMG2_TCWL(tcwl) | DRAMTMG2_TCL(tcl) |
+	       DRAMTMG2_TRD2WR(trd2wr) | DRAMTMG2_TWR2RD(twr2rd),
+	       &mctl_ctl->dramtmg[2]);
+	writel(DRAMTMG3_TMRW(tmrw) | DRAMTMG3_TMRD(tmrd) | DRAMTMG3_TMOD(tmod),
+	       &mctl_ctl->dramtmg[3]);
+	writel(DRAMTMG4_TRCD(trcd) | DRAMTMG4_TCCD(tccd) | DRAMTMG4_TRRD(trrd) |
+	       DRAMTMG4_TRP(trp), &mctl_ctl->dramtmg[4]);
+	writel(DRAMTMG5_TCKSRX(tcksrx) | DRAMTMG5_TCKSRE(tcksre) |
+	       DRAMTMG5_TCKESR(tckesr) | DRAMTMG5_TCKE(tcke),
+	       &mctl_ctl->dramtmg[5]);
+
+	/* set two rank timing */
+	clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0),
+			(0x66 << 8) | (0x10 << 0));
+
+	/* set PHY interface timing, write latency and read latency configure */
+	writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) |
+	       (wr_latency << 0), &mctl_ctl->pitmg[0]);
+
+	/* set PHY timing, PTR0-2 use default */
+	writel(PTR3_TDINIT0(tdinit0) | PTR3_TDINIT1(tdinit1), &mctl_ctl->ptr[3]);
+	writel(PTR4_TDINIT2(tdinit2) | PTR4_TDINIT3(tdinit3), &mctl_ctl->ptr[4]);
+
+	/* set refresh timing */
+	writel(RFSHTMG_TREFI(trefi) | RFSHTMG_TRFC(trfc), &mctl_ctl->rfshtmg);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/gtbus_sun9i.c b/roms/u-boot/arch/arm/mach-sunxi/gtbus_sun9i.c
new file mode 100644
index 000000000..cf011c4cf
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/gtbus_sun9i.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * GTBUS initialisation for sun9i
+ *
+ * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
+ *                    Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gtbus_sun9i.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+
+void gtbus_init(void)
+{
+	struct sunxi_gtbus_reg * const gtbus =
+		(struct sunxi_gtbus_reg *)SUNXI_GTBUS_BASE;
+
+	/*
+	 * We use the same setting that Allwinner used in Boot0 for now.
+	 * It may be advantageous to adjust these for various workloads
+	 * (e.g. headless use cases that focus on IO throughput).
+	 */
+	writel((GT_PRIO_HIGH << GT_PORT_FE0) |
+	       (GT_PRIO_HIGH << GT_PORT_BE1) |
+	       (GT_PRIO_HIGH << GT_PORT_BE2) |
+	       (GT_PRIO_HIGH << GT_PORT_IEP0) |
+	       (GT_PRIO_HIGH << GT_PORT_FE1) |
+	       (GT_PRIO_HIGH << GT_PORT_BE0) |
+	       (GT_PRIO_HIGH << GT_PORT_FE2) |
+	       (GT_PRIO_HIGH << GT_PORT_IEP1),
+	       &gtbus->mst_read_prio_cfg[0]);
+
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_FE0]);
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_FE0]);
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_BE1]);
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_BE2]);
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_IEP0]);
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_FE1]);
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_BE0]);
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_FE2]);
+	writel(GP_MST_CFG_DEFAULT, &gtbus->mst_cfg[GT_PORT_IEP1]);
+}
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-sunxi/p2wi.c b/roms/u-boot/arch/arm/mach-sunxi/p2wi.c
new file mode 100644
index 000000000..7c5c12254
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/p2wi.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Sunxi A31 Power Management Unit
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work
+ *
+ * (C) Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <time.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/p2wi.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+void p2wi_init(void)
+{
+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+
+	/* Enable p2wi and PIO clk, and de-assert their resets */
+	prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
+
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK);
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA);
+
+	/* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
+	writel(P2WI_CTRL_RESET, &p2wi->ctrl);
+	sdelay(0x100);
+	writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
+	       &p2wi->cc);
+}
+
+int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data)
+{
+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+	unsigned long tmo = timer_get_us() + 1000000;
+
+	writel(P2WI_PM_DEV_ADDR(slave_addr) |
+	       P2WI_PM_CTRL_ADDR(ctrl_reg) |
+	       P2WI_PM_INIT_DATA(init_data) |
+	       P2WI_PM_INIT_SEND,
+	       &p2wi->pm);
+
+	while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) {
+		if (timer_get_us() > tmo)
+			return -ETIME;
+	}
+
+	return 0;
+}
+
+static int p2wi_await_trans(void)
+{
+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+	unsigned long tmo = timer_get_us() + 1000000;
+	int ret;
+	u8 reg;
+
+	while (1) {
+		reg = readl(&p2wi->status);
+		if (reg & P2WI_STAT_TRANS_ERR) {
+			ret = -EIO;
+			break;
+		}
+		if (reg & P2WI_STAT_TRANS_DONE) {
+			ret = 0;
+			break;
+		}
+		if (timer_get_us() > tmo) {
+			ret = -ETIME;
+			break;
+		}
+	}
+	writel(reg, &p2wi->status); /* Clear status bits */
+	return ret;
+}
+
+int p2wi_read(const u8 addr, u8 *data)
+{
+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+	int ret;
+
+	writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
+	writel(P2WI_DATA_NUM_BYTES(1) |
+	       P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes);
+	writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
+	writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
+
+	ret = p2wi_await_trans();
+
+	*data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK;
+	return ret;
+}
+
+int p2wi_write(const u8 addr, u8 data)
+{
+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+
+	writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
+	writel(P2WI_DATA_BYTE_1(data), &p2wi->data0);
+	writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes);
+	writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
+	writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
+
+	return p2wi_await_trans();
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/pinmux.c b/roms/u-boot/arch/arm/mach-sunxi/pinmux.c
new file mode 100644
index 000000000..642483f06
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/pinmux.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+
+void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val)
+{
+	u32 index = GPIO_CFG_INDEX(bank_offset);
+	u32 offset = GPIO_CFG_OFFSET(bank_offset);
+
+	clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset);
+}
+
+void sunxi_gpio_set_cfgpin(u32 pin, u32 val)
+{
+	u32 bank = GPIO_BANK(pin);
+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+	sunxi_gpio_set_cfgbank(pio, pin, val);
+}
+
+int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset)
+{
+	u32 index = GPIO_CFG_INDEX(bank_offset);
+	u32 offset = GPIO_CFG_OFFSET(bank_offset);
+	u32 cfg;
+
+	cfg = readl(&pio->cfg[0] + index);
+	cfg >>= offset;
+
+	return cfg & 0xf;
+}
+
+int sunxi_gpio_get_cfgpin(u32 pin)
+{
+	u32 bank = GPIO_BANK(pin);
+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+	return sunxi_gpio_get_cfgbank(pio, pin);
+}
+
+int sunxi_gpio_set_drv(u32 pin, u32 val)
+{
+	u32 bank = GPIO_BANK(pin);
+	u32 index = GPIO_DRV_INDEX(pin);
+	u32 offset = GPIO_DRV_OFFSET(pin);
+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+	clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset);
+
+	return 0;
+}
+
+int sunxi_gpio_set_pull(u32 pin, u32 val)
+{
+	u32 bank = GPIO_BANK(pin);
+	u32 index = GPIO_PULL_INDEX(pin);
+	u32 offset = GPIO_PULL_OFFSET(pin);
+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+	clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/pmic_bus.c b/roms/u-boot/arch/arm/mach-sunxi/pmic_bus.c
new file mode 100644
index 000000000..0394ce856
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/pmic_bus.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Sunxi PMIC bus access helpers
+ *
+ * The axp152 & axp209 use an i2c bus, the axp221 uses the p2wi bus and the
+ * axp223 uses the rsb bus, these functions abstract this.
+ */
+
+#include <common.h>
+#include <asm/arch/p2wi.h>
+#include <asm/arch/rsb.h>
+#include <i2c.h>
+#include <asm/arch/pmic_bus.h>
+
+#define AXP152_I2C_ADDR			0x30
+
+#define AXP209_I2C_ADDR			0x34
+
+#define AXP305_I2C_ADDR			0x36
+
+#define AXP221_CHIP_ADDR		0x68
+#define AXP221_CTRL_ADDR		0x3e
+#define AXP221_INIT_DATA		0x3e
+
+/* AXP818 device and runtime addresses are same as AXP223 */
+#define AXP223_DEVICE_ADDR		0x3a3
+#define AXP223_RUNTIME_ADDR		0x2d
+
+int pmic_bus_init(void)
+{
+	/* This cannot be 0 because it is used in SPL before BSS is ready */
+	static int needs_init = 1;
+	__maybe_unused int ret;
+
+	if (!needs_init)
+		return 0;
+
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+	p2wi_init();
+	ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
+				       AXP221_INIT_DATA);
+# elif defined CONFIG_MACH_SUN8I_R40
+	/* Nothing. R40 uses the AXP221s in I2C mode */
+	ret = 0;
+# else
+	ret = rsb_init();
+	if (ret)
+		return ret;
+
+	ret = rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
+# endif
+	if (ret)
+		return ret;
+#endif
+
+	needs_init = 0;
+	return 0;
+}
+
+int pmic_bus_read(u8 reg, u8 *data)
+{
+#ifdef CONFIG_AXP152_POWER
+	return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP209_POWER
+	return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP305_POWER
+	return i2c_read(AXP305_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+	return p2wi_read(reg, data);
+# elif defined CONFIG_MACH_SUN8I_R40
+	return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
+# else
+	return rsb_read(AXP223_RUNTIME_ADDR, reg, data);
+# endif
+#endif
+}
+
+int pmic_bus_write(u8 reg, u8 data)
+{
+#ifdef CONFIG_AXP152_POWER
+	return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP209_POWER
+	return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP305_POWER
+	return i2c_write(AXP305_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+	return p2wi_write(reg, data);
+# elif defined CONFIG_MACH_SUN8I_R40
+	return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
+# else
+	return rsb_write(AXP223_RUNTIME_ADDR, reg, data);
+# endif
+#endif
+}
+
+int pmic_bus_setbits(u8 reg, u8 bits)
+{
+	int ret;
+	u8 val;
+
+	ret = pmic_bus_read(reg, &val);
+	if (ret)
+		return ret;
+
+	if ((val & bits) == bits)
+		return 0;
+
+	val |= bits;
+	return pmic_bus_write(reg, val);
+}
+
+int pmic_bus_clrbits(u8 reg, u8 bits)
+{
+	int ret;
+	u8 val;
+
+	ret = pmic_bus_read(reg, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & bits))
+		return 0;
+
+	val &= ~bits;
+	return pmic_bus_write(reg, val);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/prcm.c b/roms/u-boot/arch/arm/mach-sunxi/prcm.c
new file mode 100644
index 000000000..71a2e4491
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/prcm.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Sunxi A31 Power Management Unit
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work
+ *
+ * (C) Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+/* APB0 clock gate and reset bit offsets are the same. */
+void prcm_apb0_enable(u32 flags)
+{
+	struct sunxi_prcm_reg *prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+	/* open the clock for module */
+	setbits_le32(&prcm->apb0_gate, flags);
+
+	/* deassert reset for module */
+	setbits_le32(&prcm->apb0_reset, flags);
+}
+
+void prcm_apb0_disable(u32 flags)
+{
+	struct sunxi_prcm_reg *prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+	/* assert reset for module */
+	clrbits_le32(&prcm->apb0_reset, flags);
+
+	/* close the clock for module */
+	clrbits_le32(&prcm->apb0_gate, flags);
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/rmr_switch.S b/roms/u-boot/arch/arm/mach-sunxi/rmr_switch.S
new file mode 100644
index 000000000..33e55d496
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/rmr_switch.S
@@ -0,0 +1,47 @@
+@
+@ ARMv8 RMR reset sequence on Allwinner SoCs.
+@
+@ All 64-bit capable Allwinner SoCs reset in AArch32 (and continue to
+@ exectute the Boot ROM in this state), so we need to switch to AArch64
+@ at some point.
+@ Section G6.2.133 of the ARMv8 ARM describes the Reset Management Register
+@ (RMR), which triggers a warm-reset of a core and can request to switch
+@ into a different execution state (AArch32 or AArch64).
+@ The address at which execution starts after the reset is held in the
+@ RVBAR system register, which is architecturally read-only.
+@ Allwinner provides a writable alias of this register in MMIO space, so
+@ we can easily set the start address of AArch64 code.
+@ This code below switches to AArch64 and starts execution at the specified
+@ start address. It needs to be assembled by an ARM(32) assembler and
+@ the machine code must be inserted as verbatim .word statements into the
+@ beginning of the AArch64 U-Boot code.
+@ To get the encoded bytes, use:
+@ ${CROSS_COMPILE}gcc -c -o rmr_switch.o rmr_switch.S
+@ ${CROSS_COMPILE}objdump -d rmr_switch.o
+@
+@ The resulting words should be inserted into the U-Boot file at
+@ arch/arm/include/asm/arch-sunxi/boot0.h.
+@
+@ This file is not build by the U-Boot build system, but provided only as a
+@ reference and to be able to regenerate a (probably fixed) version of this
+@ code found in encoded form in boot0.h.
+
+#include <config.h>
+
+.text
+
+#ifndef CONFIG_SUN50I_GEN_H6
+	ldr	r1, =0x017000a0		@ MMIO mapped RVBAR[0] register
+#else
+	ldr	r1, =0x09010040		@ MMIO mapped RVBAR[0] register
+#endif
+	ldr	r0, =0x57aA7add		@ start address, to be replaced
+	str	r0, [r1]
+	dsb	sy
+	isb	sy
+	mrc	15, 0, r0, cr12, cr0, 2	@ read RMR register
+	orr	r0, r0, #3		@ request reset in AArch64
+	mcr	15, 0, r0, cr12, cr0, 2 @ write RMR register
+	isb	sy
+1:	wfi
+	b	1b
diff --git a/roms/u-boot/arch/arm/mach-sunxi/rsb.c b/roms/u-boot/arch/arm/mach-sunxi/rsb.c
new file mode 100644
index 000000000..01bb09b74
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/rsb.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on allwinner u-boot sources rsb code which is:
+ * (C) Copyright 2007-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * lixiang <lixiang@allwinnertech.com>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <time.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/rsb.h>
+
+static int rsb_set_device_mode(void);
+
+static void rsb_cfg_io(void)
+{
+#ifdef CONFIG_MACH_SUN8I
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL_R_RSB);
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL_R_RSB);
+	sunxi_gpio_set_pull(SUNXI_GPL(0), 1);
+	sunxi_gpio_set_pull(SUNXI_GPL(1), 1);
+	sunxi_gpio_set_drv(SUNXI_GPL(0), 2);
+	sunxi_gpio_set_drv(SUNXI_GPL(1), 2);
+#elif defined CONFIG_MACH_SUN9I
+	sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN_R_RSB);
+	sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN_R_RSB);
+	sunxi_gpio_set_pull(SUNXI_GPN(0), 1);
+	sunxi_gpio_set_pull(SUNXI_GPN(1), 1);
+	sunxi_gpio_set_drv(SUNXI_GPN(0), 2);
+	sunxi_gpio_set_drv(SUNXI_GPN(1), 2);
+#else
+#error unsupported MACH_SUNXI
+#endif
+}
+
+static void rsb_set_clk(void)
+{
+	struct sunxi_rsb_reg * const rsb =
+		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+	u32 div = 0;
+	u32 cd_odly = 0;
+
+	/* Source is Hosc24M, set RSB clk to 3Mhz */
+	div = 24000000 / 3000000 / 2 - 1;
+	cd_odly = div >> 1;
+	if (!cd_odly)
+		cd_odly = 1;
+
+	writel((cd_odly << 8) | div, &rsb->ccr);
+}
+
+int rsb_init(void)
+{
+	struct sunxi_rsb_reg * const rsb =
+		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+	/* Enable RSB and PIO clk, and de-assert their resets */
+	prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB);
+
+	/* Setup external pins */
+	rsb_cfg_io();
+
+	writel(RSB_CTRL_SOFT_RST, &rsb->ctrl);
+	rsb_set_clk();
+
+	return rsb_set_device_mode();
+}
+
+static int rsb_await_trans(void)
+{
+	struct sunxi_rsb_reg * const rsb =
+		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+	unsigned long tmo = timer_get_us() + 1000000;
+	u32 stat;
+	int ret;
+
+	while (1) {
+		stat = readl(&rsb->stat);
+		if (stat & RSB_STAT_LBSY_INT) {
+			ret = -EBUSY;
+			break;
+		}
+		if (stat & RSB_STAT_TERR_INT) {
+			ret = -EIO;
+			break;
+		}
+		if (stat & RSB_STAT_TOVER_INT) {
+			ret = 0;
+			break;
+		}
+		if (timer_get_us() > tmo) {
+			ret = -ETIME;
+			break;
+		}
+	}
+	writel(stat, &rsb->stat); /* Clear status bits */
+
+	return ret;
+}
+
+static int rsb_set_device_mode(void)
+{
+	struct sunxi_rsb_reg * const rsb =
+		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+	unsigned long tmo = timer_get_us() + 1000000;
+
+	writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA,
+	       &rsb->dmcr);
+
+	while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) {
+		if (timer_get_us() > tmo)
+			return -ETIME;
+	}
+
+	return rsb_await_trans();
+}
+
+static int rsb_do_trans(void)
+{
+	struct sunxi_rsb_reg * const rsb =
+		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+	setbits_le32(&rsb->ctrl, RSB_CTRL_START_TRANS);
+	return rsb_await_trans();
+}
+
+int rsb_set_device_address(u16 device_addr, u16 runtime_addr)
+{
+	struct sunxi_rsb_reg * const rsb =
+		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+	writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr) |
+	       RSB_DEVADDR_DEVICE_ADDR(device_addr), &rsb->devaddr);
+	writel(RSB_CMD_SET_RTSADDR, &rsb->cmd);
+
+	return rsb_do_trans();
+}
+
+int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data)
+{
+	struct sunxi_rsb_reg * const rsb =
+		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+	writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
+	writel(reg_addr, &rsb->addr);
+	writel(data, &rsb->data);
+	writel(RSB_CMD_BYTE_WRITE, &rsb->cmd);
+
+	return rsb_do_trans();
+}
+
+int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data)
+{
+	struct sunxi_rsb_reg * const rsb =
+		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+	int ret;
+
+	writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
+	writel(reg_addr, &rsb->addr);
+	writel(RSB_CMD_BYTE_READ, &rsb->cmd);
+
+	ret = rsb_do_trans();
+	if (ret)
+		return ret;
+
+	*data = readl(&rsb->data) & 0xff;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-sunxi/spl_spi_sunxi.c b/roms/u-boot/arch/arm/mach-sunxi/spl_spi_sunxi.c
new file mode 100644
index 000000000..15e86cbac
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-sunxi/spl_spi_sunxi.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ */
+
+#include <common.h>
+#include <image.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/libfdt.h>
+
+#ifdef CONFIG_SPL_OS_BOOT
+#error CONFIG_SPL_OS_BOOT is not supported yet
+#endif
+
+/*
+ * This is a very simple U-Boot image loading implementation, trying to
+ * replicate what the boot ROM is doing when loading the SPL. Because we
+ * know the exact pins where the SPI Flash is connected and also know
+ * that the Read Data Bytes (03h) command is supported, the hardware
+ * configuration is very simple and we don't need the extra flexibility
+ * of the SPI framework. Moreover, we rely on the default settings of
+ * the SPI controler hardware registers and only adjust what needs to
+ * be changed. This is good for the code size and this implementation
+ * adds less than 400 bytes to the SPL.
+ *
+ * There are two variants of the SPI controller in Allwinner SoCs:
+ * A10/A13/A20 (sun4i variant) and everything else (sun6i variant).
+ * Both of them are supported.
+ *
+ * The pin mixing part is SoC specific and only A10/A13/A20/H3/A64 are
+ * supported at the moment.
+ */
+
+/*****************************************************************************/
+/* SUN4I variant of the SPI controller                                       */
+/*****************************************************************************/
+
+#define SUN4I_SPI0_CCTL             0x1C
+#define SUN4I_SPI0_CTL              0x08
+#define SUN4I_SPI0_RX               0x00
+#define SUN4I_SPI0_TX               0x04
+#define SUN4I_SPI0_FIFO_STA         0x28
+#define SUN4I_SPI0_BC               0x20
+#define SUN4I_SPI0_TC               0x24
+
+#define SUN4I_CTL_ENABLE            BIT(0)
+#define SUN4I_CTL_MASTER            BIT(1)
+#define SUN4I_CTL_TF_RST            BIT(8)
+#define SUN4I_CTL_RF_RST            BIT(9)
+#define SUN4I_CTL_XCH               BIT(10)
+
+/*****************************************************************************/
+/* SUN6I variant of the SPI controller                                       */
+/*****************************************************************************/
+
+#define SUN6I_SPI0_CCTL             0x24
+#define SUN6I_SPI0_GCR              0x04
+#define SUN6I_SPI0_TCR              0x08
+#define SUN6I_SPI0_FIFO_STA         0x1C
+#define SUN6I_SPI0_MBC              0x30
+#define SUN6I_SPI0_MTC              0x34
+#define SUN6I_SPI0_BCC              0x38
+#define SUN6I_SPI0_TXD              0x200
+#define SUN6I_SPI0_RXD              0x300
+
+#define SUN6I_CTL_ENABLE            BIT(0)
+#define SUN6I_CTL_MASTER            BIT(1)
+#define SUN6I_CTL_SRST              BIT(31)
+#define SUN6I_TCR_XCH               BIT(31)
+
+/*****************************************************************************/
+
+#define CCM_AHB_GATING0             (0x01C20000 + 0x60)
+#define CCM_H6_SPI_BGR_REG          (0x03001000 + 0x96c)
+#ifdef CONFIG_MACH_SUN50I_H6
+#define CCM_SPI0_CLK                (0x03001000 + 0x940)
+#else
+#define CCM_SPI0_CLK                (0x01C20000 + 0xA0)
+#endif
+#define SUN6I_BUS_SOFT_RST_REG0     (0x01C20000 + 0x2C0)
+
+#define AHB_RESET_SPI0_SHIFT        20
+#define AHB_GATE_OFFSET_SPI0        20
+
+#define SPI0_CLK_DIV_BY_2           0x1000
+#define SPI0_CLK_DIV_BY_4           0x1001
+
+/*****************************************************************************/
+
+/*
+ * Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting
+ * from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3.
+ * The H6 uses PC0, PC2, PC3, PC5.
+ */
+static void spi0_pinmux_setup(unsigned int pin_function)
+{
+	/* All chips use PC0 and PC2. */
+	sunxi_gpio_set_cfgpin(SUNXI_GPC(0), pin_function);
+	sunxi_gpio_set_cfgpin(SUNXI_GPC(2), pin_function);
+
+	/* All chips except H6 use PC1, and only H6 uses PC5. */
+	if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		sunxi_gpio_set_cfgpin(SUNXI_GPC(1), pin_function);
+	else
+		sunxi_gpio_set_cfgpin(SUNXI_GPC(5), pin_function);
+
+	/* Older generations use PC23 for CS, newer ones use PC3. */
+	if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I) ||
+	    IS_ENABLED(CONFIG_MACH_SUN8I_R40))
+		sunxi_gpio_set_cfgpin(SUNXI_GPC(23), pin_function);
+	else
+		sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function);
+}
+
+static bool is_sun6i_gen_spi(void)
+{
+	return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ||
+	       IS_ENABLED(CONFIG_MACH_SUN50I_H6);
+}
+
+static uintptr_t spi0_base_address(void)
+{
+	if (IS_ENABLED(CONFIG_MACH_SUN8I_R40))
+		return 0x01C05000;
+
+	if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		return 0x05010000;
+
+	if (!is_sun6i_gen_spi())
+		return 0x01C05000;
+
+	return 0x01C68000;
+}
+
+/*
+ * Setup 6 MHz from OSC24M (because the BROM is doing the same).
+ */
+static void spi0_enable_clock(void)
+{
+	uintptr_t base = spi0_base_address();
+
+	/* Deassert SPI0 reset on SUN6I */
+	if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		setbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1);
+	else if (is_sun6i_gen_spi())
+		setbits_le32(SUN6I_BUS_SOFT_RST_REG0,
+			     (1 << AHB_RESET_SPI0_SHIFT));
+
+	/* Open the SPI0 gate */
+	if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
+
+	/* Divide by 4 */
+	writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ?
+				  SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL));
+	/* 24MHz from OSC24M */
+	writel((1 << 31), CCM_SPI0_CLK);
+
+	if (is_sun6i_gen_spi()) {
+		/* Enable SPI in the master mode and do a soft reset */
+		setbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
+			     SUN6I_CTL_ENABLE | SUN6I_CTL_SRST);
+		/* Wait for completion */
+		while (readl(base + SUN6I_SPI0_GCR) & SUN6I_CTL_SRST)
+			;
+	} else {
+		/* Enable SPI in the master mode and reset FIFO */
+		setbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
+						    SUN4I_CTL_ENABLE |
+						    SUN4I_CTL_TF_RST |
+						    SUN4I_CTL_RF_RST);
+	}
+}
+
+static void spi0_disable_clock(void)
+{
+	uintptr_t base = spi0_base_address();
+
+	/* Disable the SPI0 controller */
+	if (is_sun6i_gen_spi())
+		clrbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
+					     SUN6I_CTL_ENABLE);
+	else
+		clrbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
+					     SUN4I_CTL_ENABLE);
+
+	/* Disable the SPI0 clock */
+	writel(0, CCM_SPI0_CLK);
+
+	/* Close the SPI0 gate */
+	if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
+
+	/* Assert SPI0 reset on SUN6I */
+	if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		clrbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1);
+	else if (is_sun6i_gen_spi())
+		clrbits_le32(SUN6I_BUS_SOFT_RST_REG0,
+			     (1 << AHB_RESET_SPI0_SHIFT));
+}
+
+static void spi0_init(void)
+{
+	unsigned int pin_function = SUNXI_GPC_SPI0;
+
+	if (IS_ENABLED(CONFIG_MACH_SUN50I) ||
+	    IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		pin_function = SUN50I_GPC_SPI0;
+
+	spi0_pinmux_setup(pin_function);
+	spi0_enable_clock();
+}
+
+static void spi0_deinit(void)
+{
+	/* New SoCs can disable pins, older could only set them as input */
+	unsigned int pin_function = SUNXI_GPIO_INPUT;
+
+	if (is_sun6i_gen_spi())
+		pin_function = SUNXI_GPIO_DISABLE;
+
+	spi0_disable_clock();
+	spi0_pinmux_setup(pin_function);
+}
+
+/*****************************************************************************/
+
+#define SPI_READ_MAX_SIZE 60 /* FIFO size, minus 4 bytes of the header */
+
+static void sunxi_spi0_read_data(u8 *buf, u32 addr, u32 bufsize,
+				 ulong spi_ctl_reg,
+				 ulong spi_ctl_xch_bitmask,
+				 ulong spi_fifo_reg,
+				 ulong spi_tx_reg,
+				 ulong spi_rx_reg,
+				 ulong spi_bc_reg,
+				 ulong spi_tc_reg,
+				 ulong spi_bcc_reg)
+{
+	writel(4 + bufsize, spi_bc_reg); /* Burst counter (total bytes) */
+	writel(4, spi_tc_reg);           /* Transfer counter (bytes to send) */
+	if (spi_bcc_reg)
+		writel(4, spi_bcc_reg);  /* SUN6I also needs this */
+
+	/* Send the Read Data Bytes (03h) command header */
+	writeb(0x03, spi_tx_reg);
+	writeb((u8)(addr >> 16), spi_tx_reg);
+	writeb((u8)(addr >> 8), spi_tx_reg);
+	writeb((u8)(addr), spi_tx_reg);
+
+	/* Start the data transfer */
+	setbits_le32(spi_ctl_reg, spi_ctl_xch_bitmask);
+
+	/* Wait until everything is received in the RX FIFO */
+	while ((readl(spi_fifo_reg) & 0x7F) < 4 + bufsize)
+		;
+
+	/* Skip 4 bytes */
+	readl(spi_rx_reg);
+
+	/* Read the data */
+	while (bufsize-- > 0)
+		*buf++ = readb(spi_rx_reg);
+
+	/* tSHSL time is up to 100 ns in various SPI flash datasheets */
+	udelay(1);
+}
+
+static void spi0_read_data(void *buf, u32 addr, u32 len)
+{
+	u8 *buf8 = buf;
+	u32 chunk_len;
+	uintptr_t base = spi0_base_address();
+
+	while (len > 0) {
+		chunk_len = len;
+		if (chunk_len > SPI_READ_MAX_SIZE)
+			chunk_len = SPI_READ_MAX_SIZE;
+
+		if (is_sun6i_gen_spi()) {
+			sunxi_spi0_read_data(buf8, addr, chunk_len,
+					     base + SUN6I_SPI0_TCR,
+					     SUN6I_TCR_XCH,
+					     base + SUN6I_SPI0_FIFO_STA,
+					     base + SUN6I_SPI0_TXD,
+					     base + SUN6I_SPI0_RXD,
+					     base + SUN6I_SPI0_MBC,
+					     base + SUN6I_SPI0_MTC,
+					     base + SUN6I_SPI0_BCC);
+		} else {
+			sunxi_spi0_read_data(buf8, addr, chunk_len,
+					     base + SUN4I_SPI0_CTL,
+					     SUN4I_CTL_XCH,
+					     base + SUN4I_SPI0_FIFO_STA,
+					     base + SUN4I_SPI0_TX,
+					     base + SUN4I_SPI0_RX,
+					     base + SUN4I_SPI0_BC,
+					     base + SUN4I_SPI0_TC,
+					     0);
+		}
+
+		len  -= chunk_len;
+		buf8 += chunk_len;
+		addr += chunk_len;
+	}
+}
+
+static ulong spi_load_read(struct spl_load_info *load, ulong sector,
+			   ulong count, void *buf)
+{
+	spi0_read_data(buf, sector, count);
+
+	return count;
+}
+
+/*****************************************************************************/
+
+static int spl_spi_load_image(struct spl_image_info *spl_image,
+			      struct spl_boot_device *bootdev)
+{
+	int ret = 0;
+	struct image_header *header;
+	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+
+	spi0_init();
+
+	spi0_read_data((void *)header, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40);
+
+        if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
+		image_get_magic(header) == FDT_MAGIC) {
+		struct spl_load_info load;
+
+		debug("Found FIT image\n");
+		load.dev = NULL;
+		load.priv = NULL;
+		load.filename = NULL;
+		load.bl_len = 1;
+		load.read = spi_load_read;
+		ret = spl_load_simple_fit(spl_image, &load,
+					  CONFIG_SYS_SPI_U_BOOT_OFFS, header);
+	} else {
+		ret = spl_parse_image_header(spl_image, header);
+		if (ret)
+			return ret;
+
+		spi0_read_data((void *)spl_image->load_addr,
+			       CONFIG_SYS_SPI_U_BOOT_OFFS, spl_image->size);
+	}
+
+	spi0_deinit();
+
+	return ret;
+}
+/* Use priorty 0 to override the default if it happens to be linked in */
+SPL_LOAD_IMAGE_METHOD("sunxi SPI", 0, BOOT_DEVICE_SPI, spl_spi_load_image);
diff --git a/roms/u-boot/arch/arm/mach-tegra/Kconfig b/roms/u-boot/arch/arm/mach-tegra/Kconfig
new file mode 100644
index 000000000..a397748b7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/Kconfig
@@ -0,0 +1,190 @@
+if ARCH_TEGRA
+
+config SPL_GPIO_SUPPORT
+	default y
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config TEGRA_CLKRST
+	bool
+
+config TEGRA_GP_PADCTRL
+	bool
+
+config TEGRA_IVC
+	bool "Tegra IVC protocol"
+	help
+	  IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
+	  (Inter Processor Communication) framework. Within the context of
+	  U-Boot, it is typically used for communication between the main CPU
+	  and various auxiliary processors.
+
+config TEGRA_MC
+	bool
+
+config TEGRA_PINCTRL
+	bool
+
+config TEGRA_PMC
+	bool
+
+config TEGRA_PMC_SECURE
+	bool
+	depends on TEGRA_PMC
+
+config TEGRA_COMMON
+	bool "Tegra common options"
+	select BOARD_EARLY_INIT_F
+	select CLK
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_KEYBOARD
+	select DM_MMC
+	select DM_PWM
+	select DM_RESET
+	select DM_SERIAL
+	select DM_SPI
+	select DM_SPI_FLASH
+	select MISC
+	select OF_CONTROL
+	select SPI
+	imply CMD_DM
+	imply CRC32_VERIFY
+
+config TEGRA_NO_BPMP
+	bool "Tegra common options for SoCs without BPMP"
+	select TEGRA_CAR
+	select TEGRA_CAR_CLOCK
+	select TEGRA_CAR_RESET
+
+config TEGRA_ARMV7_COMMON
+	bool "Tegra 32-bit common options"
+	select BINMAN
+	select CPU_V7A
+	select SPL
+	select SPL_BOARD_INIT if SPL
+	select SUPPORT_SPL
+	select TEGRA_CLKRST
+	select TEGRA_COMMON
+	select TEGRA_GPIO
+	select TEGRA_GP_PADCTRL
+	select TEGRA_MC
+	select TEGRA_NO_BPMP
+	select TEGRA_PINCTRL
+	select TEGRA_PMC
+
+config TEGRA_ARMV8_COMMON
+	bool "Tegra 64-bit common options"
+	select ARM64
+	select INIT_SP_RELATIVE
+	select LINUX_KERNEL_IMAGE_HEADER
+	select POSITION_INDEPENDENT
+	select TEGRA_COMMON
+
+if TEGRA_ARMV8_COMMON
+config LNX_KRNL_IMG_TEXT_OFFSET_BASE
+	default 0x80000000
+endif
+
+choice
+	prompt "Tegra SoC select"
+	optional
+
+config TEGRA20
+	bool "Tegra20 family"
+	select ARM_ERRATA_716044
+	select ARM_ERRATA_742230
+	select ARM_ERRATA_751472
+	select TEGRA_ARMV7_COMMON
+
+config TEGRA30
+	bool "Tegra30 family"
+	select ARM_ERRATA_743622
+	select ARM_ERRATA_751472
+	select TEGRA_ARMV7_COMMON
+
+config TEGRA114
+	bool "Tegra114 family"
+	select TEGRA_ARMV7_COMMON
+
+config TEGRA124
+	bool "Tegra124 family"
+	select TEGRA_ARMV7_COMMON
+	imply REGMAP
+	imply SYSCON
+
+config TEGRA210
+	bool "Tegra210 family"
+	select TEGRA_ARMV8_COMMON
+	select TEGRA_CLKRST
+	select TEGRA_GPIO
+	select TEGRA_GP_PADCTRL
+	select TEGRA_MC
+	select TEGRA_NO_BPMP
+	select TEGRA_PINCTRL
+	select TEGRA_PMC
+	select TEGRA_PMC_SECURE
+
+config TEGRA186
+	bool "Tegra186 family"
+	select DM_MAILBOX
+	select TEGRA186_BPMP
+	select TEGRA186_CLOCK
+	select TEGRA186_GPIO
+	select TEGRA186_RESET
+	select TEGRA_ARMV8_COMMON
+	select TEGRA_HSP
+	select TEGRA_IVC
+
+endchoice
+
+config TEGRA_DISCONNECT_UDC_ON_BOOT
+	bool "Disconnect USB device mode controller on boot"
+	depends on CI_UDC
+	default y
+	help
+	  When loading U-Boot into RAM over USB protocols using tools such as
+	  tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
+	  mode controller is initialized and enumerated by the host PC running
+	  the tool. Unfortunately, these tools do not shut down the USB
+	  controller before executing the downloaded code, and so the host PC
+	  does not "de-enumerate" the USB device. This option shuts down the
+	  USB controller when U-Boot boots to avoid leaving a stale USB device
+	  present.
+
+config SYS_MALLOC_F_LEN
+	default 0x1800
+
+source "arch/arm/mach-tegra/tegra20/Kconfig"
+source "arch/arm/mach-tegra/tegra30/Kconfig"
+source "arch/arm/mach-tegra/tegra114/Kconfig"
+source "arch/arm/mach-tegra/tegra124/Kconfig"
+source "arch/arm/mach-tegra/tegra210/Kconfig"
+source "arch/arm/mach-tegra/tegra186/Kconfig"
+
+config CMD_ENTERRCM
+	bool "Enable 'enterrcm' command"
+	default y
+	help
+	  Tegra's boot ROM supports a mode whereby code may be downloaded and
+	  flash-programmed over a USB connection. On dev boards, this is
+	  typically entered by holding down a "force recovery" button and
+	  resetting the CPU. However, not all boards have such a button (one
+	  example is the Compulab Trimslice), so a method to enter RCM from
+	  software is useful.
+
+	  Even on boards other than Trimslice, controlling this over a UART
+	  may be useful, e.g. to allow simple remote control without the need
+	  for mechanical button actuators, or hooking up relays/... to the
+	  button.
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/Makefile b/roms/u-boot/arch/arm/mach-tegra/Makefile
new file mode 100644
index 000000000..7165d70a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/Makefile
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010-2019 Nvidia Corporation.
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-y += cpu.o
+else
+obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
+endif
+
+obj-$(CONFIG_TEGRA_GP_PADCTRL) += ap.o
+obj-y += board.o board2.o
+obj-y += cache.o
+obj-$(CONFIG_TEGRA_CLKRST) += clock.o
+obj-$(CONFIG_TEGRA_PINCTRL) += pinmux-common.o
+obj-$(CONFIG_TEGRA_PMC) += powergate.o
+obj-y += xusb-padctl-dummy.o
+
+obj-$(CONFIG_ARM64) += arm64-mmu.o cboot.o
+obj-y += dt-setup.o
+obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+obj-$(CONFIG_TEGRA_GPU) += gpu.o
+obj-$(CONFIG_TEGRA_IVC) += ivc.o
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_ARMV7_PSCI) += psci.o
+endif
+obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o
+obj-y += pmc.o
+
+obj-$(CONFIG_TEGRA20) += tegra20/
+obj-$(CONFIG_TEGRA30) += tegra30/
+obj-$(CONFIG_TEGRA114) += tegra114/
+obj-$(CONFIG_TEGRA124) += tegra124/
+obj-$(CONFIG_TEGRA186) += tegra186/
+obj-$(CONFIG_TEGRA210) += tegra210/
diff --git a/roms/u-boot/arch/arm/mach-tegra/ap.c b/roms/u-boot/arch/arm/mach-tegra/ap.c
new file mode 100644
index 000000000..532730fe7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/ap.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra AP (Application Processor) code */
+
+#include <common.h>
+#include <log.h>
+#include <linux/bug.h>
+#include <asm/io.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/mc.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/clock.h>
+#include <asm/arch-tegra/fuse.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/scu.h>
+#include <asm/arch-tegra/tegra.h>
+#include <asm/arch-tegra/warmboot.h>
+
+int tegra_get_chip(void)
+{
+	int rev;
+	struct apb_misc_gp_ctlr *gp =
+		(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
+
+	/*
+	 * This is undocumented, Chip ID is bits 15:8 of the register
+	 * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
+	 * Tegra30, 0x35 for T114, and 0x40 for Tegra124.
+	 */
+	rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
+	debug("%s: CHIPID is 0x%02X\n", __func__, rev);
+
+	return rev;
+}
+
+int tegra_get_sku_info(void)
+{
+	int sku_id;
+	struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
+
+	sku_id = readl(&fuse->sku_info) & 0xff;
+	debug("%s: SKU info byte is 0x%02X\n", __func__, sku_id);
+
+	return sku_id;
+}
+
+int tegra_get_chip_sku(void)
+{
+	uint sku_id, chip_id;
+
+	chip_id = tegra_get_chip();
+	sku_id = tegra_get_sku_info();
+
+	switch (chip_id) {
+	case CHIPID_TEGRA20:
+		switch (sku_id) {
+		case SKU_ID_T20_7:
+		case SKU_ID_T20:
+			return TEGRA_SOC_T20;
+		case SKU_ID_T25SE:
+		case SKU_ID_AP25:
+		case SKU_ID_T25:
+		case SKU_ID_AP25E:
+		case SKU_ID_T25E:
+			return TEGRA_SOC_T25;
+		}
+		break;
+	case CHIPID_TEGRA30:
+		switch (sku_id) {
+		case SKU_ID_T33:
+		case SKU_ID_T30:
+		case SKU_ID_TM30MQS_P_A3:
+		default:
+			return TEGRA_SOC_T30;
+		}
+		break;
+	case CHIPID_TEGRA114:
+		switch (sku_id) {
+		case SKU_ID_T114_ENG:
+		case SKU_ID_T114_1:
+		default:
+			return TEGRA_SOC_T114;
+		}
+		break;
+	case CHIPID_TEGRA124:
+		switch (sku_id) {
+		case SKU_ID_T124_ENG:
+		default:
+			return TEGRA_SOC_T124;
+		}
+		break;
+	case CHIPID_TEGRA210:
+		switch (sku_id) {
+		case SKU_ID_T210_ENG:
+		default:
+			return TEGRA_SOC_T210;
+		}
+		break;
+	}
+
+	/* unknown chip/sku id */
+	printf("%s: ERROR: UNKNOWN CHIP/SKU ID COMBO (0x%02X/0x%02X)\n",
+		__func__, chip_id, sku_id);
+	return TEGRA_SOC_UNKNOWN;
+}
+
+#ifndef CONFIG_ARM64
+static void enable_scu(void)
+{
+	struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE;
+	u32 reg;
+
+	/* Only enable the SCU on T20/T25 */
+	if (tegra_get_chip() != CHIPID_TEGRA20)
+		return;
+
+	/* If SCU already setup/enabled, return */
+	if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE)
+		return;
+
+	/* Invalidate all ways for all processors */
+	writel(0xFFFF, &scu->scu_inv_all);
+
+	/* Enable SCU - bit 0 */
+	reg = readl(&scu->scu_ctrl);
+	reg |= SCU_CTRL_ENABLE;
+	writel(reg, &scu->scu_ctrl);
+}
+
+static u32 get_odmdata(void)
+{
+	/*
+	 * ODMDATA is stored in the BCT in IRAM by the BootROM.
+	 * The BCT start and size are stored in the BIT in IRAM.
+	 * Read the data @ bct_start + (bct_size - 12). This works
+	 * on BCTs for currently supported SoCs, which are locked down.
+	 * If this changes in new chips, we can revisit this algorithm.
+	 */
+	unsigned long bct_start;
+	u32 odmdata;
+
+	bct_start = readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BCTPTR);
+	odmdata = readl(bct_start + BCT_ODMDATA_OFFSET);
+
+	return odmdata;
+}
+
+static void init_pmc_scratch(void)
+{
+	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	u32 odmdata;
+	int i;
+
+	/* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */
+#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
+	if (!tegra_cpu_is_non_secure())
+#endif
+	{
+		for (i = 0; i < 23; i++)
+			writel(0, &pmc->pmc_scratch1 + i);
+	}
+
+	/* ODMDATA is for kernel use to determine RAM size, LP config, etc. */
+	odmdata = get_odmdata();
+	writel(odmdata, &pmc->pmc_scratch20);
+}
+
+#ifdef CONFIG_ARMV7_SECURE_RESERVE_SIZE
+void protect_secure_section(void)
+{
+	struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE;
+
+	/* Must be MB aligned */
+	BUILD_BUG_ON(CONFIG_ARMV7_SECURE_BASE & 0xFFFFF);
+	BUILD_BUG_ON(CONFIG_ARMV7_SECURE_RESERVE_SIZE & 0xFFFFF);
+
+	writel(CONFIG_ARMV7_SECURE_BASE, &mc->mc_security_cfg0);
+	writel(CONFIG_ARMV7_SECURE_RESERVE_SIZE >> 20, &mc->mc_security_cfg1);
+}
+#endif
+
+#if defined(CONFIG_ARMV7_NONSEC)
+static void smmu_flush(struct mc_ctlr *mc)
+{
+	(void)readl(&mc->mc_smmu_config);
+}
+
+static void smmu_enable(void)
+{
+	struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE;
+	u32 value;
+
+	/*
+	 * Enable translation for all clients since access to this register
+	 * is restricted to TrustZone-secured requestors. The kernel will use
+	 * the per-SWGROUP enable bits to enable or disable translations.
+	 */
+	writel(0xffffffff, &mc->mc_smmu_translation_enable_0);
+	writel(0xffffffff, &mc->mc_smmu_translation_enable_1);
+	writel(0xffffffff, &mc->mc_smmu_translation_enable_2);
+	writel(0xffffffff, &mc->mc_smmu_translation_enable_3);
+
+	/*
+	 * Enable SMMU globally since access to this register is restricted
+	 * to TrustZone-secured requestors.
+	 */
+	value = readl(&mc->mc_smmu_config);
+	value |= TEGRA_MC_SMMU_CONFIG_ENABLE;
+	writel(value, &mc->mc_smmu_config);
+
+	smmu_flush(mc);
+}
+#else
+static void smmu_enable(void)
+{
+}
+#endif
+
+void s_init(void)
+{
+	/* Init PMC scratch memory */
+	init_pmc_scratch();
+
+	enable_scu();
+
+	/* init the cache */
+	config_cache();
+
+	/* enable SMMU */
+	smmu_enable();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/arm64-mmu.c b/roms/u-boot/arch/arm/mach-tegra/arm64-mmu.c
new file mode 100644
index 000000000..d45b1faaa
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/arm64-mmu.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ * (This file derived from arch/arm/mach-zynqmp/cpu.c)
+ *
+ * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <common.h>
+#include <asm/system.h>
+#include <asm/armv8/mmu.h>
+
+/* size: IO + NR_DRAM_BANKS + terminator */
+struct mm_region tegra_mem_map[1 + CONFIG_NR_DRAM_BANKS + 1] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = tegra_mem_map;
diff --git a/roms/u-boot/arch/arm/mach-tegra/board.c b/roms/u-boot/arch/arm/mach-tegra/board.c
new file mode 100644
index 000000000..95d6555a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/board.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  (C) Copyright 2010-2015
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <init.h>
+#include <log.h>
+#include <ns16550.h>
+#include <spl.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
+#include <asm/arch/clock.h>
+#endif
+#if IS_ENABLED(CONFIG_TEGRA_PINCTRL)
+#include <asm/arch/funcmux.h>
+#endif
+#if IS_ENABLED(CONFIG_TEGRA_MC)
+#include <asm/arch/mc.h>
+#endif
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/board.h>
+#include <asm/arch-tegra/cboot.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/sys_proto.h>
+#include <asm/arch-tegra/warmboot.h>
+
+void save_boot_params_ret(void);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+	/* UARTs which we can enable */
+	UARTA	= 1 << 0,
+	UARTB	= 1 << 1,
+	UARTC	= 1 << 2,
+	UARTD	= 1 << 3,
+	UARTE	= 1 << 4,
+	UART_COUNT = 5,
+};
+
+static bool from_spl __section(".data");
+
+#ifndef CONFIG_SPL_BUILD
+void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,
+		      unsigned long r3)
+{
+	from_spl = r0 != UBOOT_NOT_LOADED_FROM_SPL;
+
+	/*
+	 * The logic for this is somewhat indirect. The purpose of the marker
+	 * (UBOOT_NOT_LOADED_FROM_SPL) is in fact used to determine if U-Boot
+	 * was loaded from a read-only instance of itself, which is something
+	 * that can happen in secure boot setups. So basically the presence
+	 * of the marker is an indication that U-Boot was loaded by one such
+	 * special variant of U-Boot. Conversely, the absence of the marker
+	 * indicates that this instance of U-Boot was loaded by something
+	 * other than a special U-Boot. This could be SPL, but it could just
+	 * as well be one of any number of other first stage bootloaders.
+	 */
+	if (from_spl)
+		cboot_save_boot_params(r0, r1, r2, r3);
+
+	save_boot_params_ret();
+}
+#endif
+
+bool spl_was_boot_source(void)
+{
+	return from_spl;
+}
+
+#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
+#if !defined(CONFIG_TEGRA124)
+#error tegra_cpu_is_non_secure has only been validated on Tegra124
+#endif
+bool tegra_cpu_is_non_secure(void)
+{
+	/*
+	 * This register reads 0xffffffff in non-secure mode. This register
+	 * only implements bits 31:20, so the lower bits will always read 0 in
+	 * secure mode. Thus, the lower bits are an indicator for secure vs.
+	 * non-secure mode.
+	 */
+	struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE;
+	uint32_t mc_s_cfg0 = readl(&mc->mc_security_cfg0);
+	return (mc_s_cfg0 & 1) == 1;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_TEGRA_MC)
+/* Read the RAM size directly from the memory controller */
+static phys_size_t query_sdram_size(void)
+{
+	struct mc_ctlr *const mc = (struct mc_ctlr *)NV_PA_MC_BASE;
+	u32 emem_cfg;
+	phys_size_t size_bytes;
+
+	emem_cfg = readl(&mc->mc_emem_cfg);
+#if defined(CONFIG_TEGRA20)
+	debug("mc->mc_emem_cfg (MEM_SIZE_KB) = 0x%08x\n", emem_cfg);
+	size_bytes = get_ram_size((void *)PHYS_SDRAM_1, emem_cfg * 1024);
+#else
+	debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", emem_cfg);
+#ifndef CONFIG_PHYS_64BIT
+	/*
+	 * If >=4GB RAM is present, the byte RAM size won't fit into 32-bits
+	 * and will wrap. Clip the reported size to the maximum that a 32-bit
+	 * variable can represent (rounded to a page).
+	 */
+	if (emem_cfg >= 4096) {
+		size_bytes = U32_MAX & ~(0x1000 - 1);
+	} else
+#endif
+	{
+		/* RAM size EMC is programmed to. */
+		size_bytes = (phys_size_t)emem_cfg * 1024 * 1024;
+#ifndef CONFIG_ARM64
+		/*
+		 * If all RAM fits within 32-bits, it can be accessed without
+		 * LPAE, so go test the RAM size. Otherwise, we can't access
+		 * all the RAM, and get_ram_size() would get confused, so
+		 * avoid using it. There's no reason we should need this
+		 * validation step anyway.
+		 */
+		if (emem_cfg <= (0 - PHYS_SDRAM_1) / (1024 * 1024))
+			size_bytes = get_ram_size((void *)PHYS_SDRAM_1,
+						  size_bytes);
+#endif
+	}
+#endif
+
+#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114)
+	/* External memory limited to 2047 MB due to IROM/HI-VEC */
+	if (size_bytes == SZ_2G)
+		size_bytes -= SZ_1M;
+#endif
+
+	return size_bytes;
+}
+#endif
+
+int dram_init(void)
+{
+	int err;
+
+	/* try to initialize DRAM from cboot DTB first */
+	err = cboot_dram_init();
+	if (err == 0)
+		return 0;
+
+#if IS_ENABLED(CONFIG_TEGRA_MC)
+	/* We do not initialise DRAM here. We just query the size */
+	gd->ram_size = query_sdram_size();
+#endif
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_TEGRA_PINCTRL)
+static int uart_configs[] = {
+#if defined(CONFIG_TEGRA20)
+ #if defined(CONFIG_TEGRA_UARTA_UAA_UAB)
+	FUNCMUX_UART1_UAA_UAB,
+ #elif defined(CONFIG_TEGRA_UARTA_GPU)
+	FUNCMUX_UART1_GPU,
+ #elif defined(CONFIG_TEGRA_UARTA_SDIO1)
+	FUNCMUX_UART1_SDIO1,
+ #else
+	FUNCMUX_UART1_IRRX_IRTX,
+#endif
+	FUNCMUX_UART2_UAD,
+	-1,
+	FUNCMUX_UART4_GMC,
+	-1,
+#elif defined(CONFIG_TEGRA30)
+	FUNCMUX_UART1_ULPI,	/* UARTA */
+	-1,
+	-1,
+	-1,
+	-1,
+#elif defined(CONFIG_TEGRA114)
+	-1,
+	-1,
+	-1,
+	FUNCMUX_UART4_GMI,	/* UARTD */
+	-1,
+#elif defined(CONFIG_TEGRA124)
+	FUNCMUX_UART1_KBC,	/* UARTA */
+	-1,
+	-1,
+	FUNCMUX_UART4_GPIO,	/* UARTD */
+	-1,
+#else	/* Tegra210 */
+	FUNCMUX_UART1_UART1,	/* UARTA */
+	-1,
+	-1,
+	FUNCMUX_UART4_UART4,	/* UARTD */
+	-1,
+#endif
+};
+
+/**
+ * Set up the specified uarts
+ *
+ * @param uarts_ids	Mask containing UARTs to init (UARTx)
+ */
+static void setup_uarts(int uart_ids)
+{
+	static enum periph_id id_for_uart[] = {
+		PERIPH_ID_UART1,
+		PERIPH_ID_UART2,
+		PERIPH_ID_UART3,
+		PERIPH_ID_UART4,
+		PERIPH_ID_UART5,
+	};
+	size_t i;
+
+	for (i = 0; i < UART_COUNT; i++) {
+		if (uart_ids & (1 << i)) {
+			enum periph_id id = id_for_uart[i];
+
+			funcmux_select(id, uart_configs[i]);
+			clock_ll_start_uart(id);
+		}
+	}
+}
+#endif
+
+void board_init_uart_f(void)
+{
+#if IS_ENABLED(CONFIG_TEGRA_PINCTRL)
+	int uart_ids = 0;	/* bit mask of which UART ids to enable */
+
+#ifdef CONFIG_TEGRA_ENABLE_UARTA
+	uart_ids |= UARTA;
+#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTB
+	uart_ids |= UARTB;
+#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTC
+	uart_ids |= UARTC;
+#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTD
+	uart_ids |= UARTD;
+#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTE
+	uart_ids |= UARTE;
+#endif
+	setup_uarts(uart_ids);
+#endif
+}
+
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+static struct ns16550_plat ns16550_com1_pdata = {
+	.base = CONFIG_SYS_NS16550_COM1,
+	.reg_shift = 2,
+	.clock = CONFIG_SYS_NS16550_CLK,
+	.fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DRVINFO(ns16550_com1) = {
+	"ns16550_serial", &ns16550_com1_pdata
+};
+#endif
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/board2.c b/roms/u-boot/arch/arm/mach-tegra/board2.c
new file mode 100644
index 000000000..8950e678a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/board2.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <errno.h>
+#include <init.h>
+#include <log.h>
+#include <ns16550.h>
+#include <usb.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/board.h>
+#include <asm/arch-tegra/cboot.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/pmu.h>
+#include <asm/arch-tegra/sys_proto.h>
+#include <asm/arch-tegra/uart.h>
+#include <asm/arch-tegra/warmboot.h>
+#include <asm/arch-tegra/gpu.h>
+#include <asm/arch-tegra/usb.h>
+#include <asm/arch-tegra/xusb-padctl.h>
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
+#include <asm/arch/clock.h>
+#endif
+#if IS_ENABLED(CONFIG_TEGRA_PINCTRL)
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#endif
+#include <asm/arch/tegra.h>
+#ifdef CONFIG_TEGRA_CLOCK_SCALING
+#include <asm/arch/emc.h>
+#endif
+#include "emc.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+/* TODO(sjg@chromium.org): Remove once SPL supports device tree */
+U_BOOT_DRVINFO(tegra_gpios) = {
+	"gpio_tegra"
+};
+#endif
+
+__weak void pinmux_init(void) {}
+__weak void pin_mux_usb(void) {}
+__weak void pin_mux_spi(void) {}
+__weak void pin_mux_mmc(void) {}
+__weak void gpio_early_init_uart(void) {}
+__weak void pin_mux_display(void) {}
+__weak void start_cpu_fan(void) {}
+__weak void cboot_late_init(void) {}
+
+#if defined(CONFIG_TEGRA_NAND)
+__weak void pin_mux_nand(void)
+{
+	funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT);
+}
+#endif
+
+/*
+ * Routine: power_det_init
+ * Description: turn off power detects
+ */
+static void power_det_init(void)
+{
+#if defined(CONFIG_TEGRA20)
+	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	/* turn off power detects */
+	writel(0, &pmc->pmc_pwr_det_latch);
+	writel(0, &pmc->pmc_pwr_det);
+#endif
+}
+
+__weak int tegra_board_id(void)
+{
+	return -1;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	int board_id = tegra_board_id();
+
+	printf("Board: %s", CONFIG_TEGRA_BOARD_STRING);
+	if (board_id != -1)
+		printf(", ID: %d\n", board_id);
+	printf("\n");
+
+	return 0;
+}
+#endif	/* CONFIG_DISPLAY_BOARDINFO */
+
+__weak int tegra_lcd_pmic_init(int board_it)
+{
+	return 0;
+}
+
+__weak int nvidia_board_init(void)
+{
+	return 0;
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	__maybe_unused int err;
+	__maybe_unused int board_id;
+
+	/* Do clocks and UART first so that printf() works */
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
+	clock_init();
+	clock_verify();
+#endif
+
+	tegra_gpu_config();
+
+#ifdef CONFIG_TEGRA_SPI
+	pin_mux_spi();
+#endif
+
+#ifdef CONFIG_MMC_SDHCI_TEGRA
+	pin_mux_mmc();
+#endif
+
+	/* Init is handled automatically in the driver-model case */
+#if defined(CONFIG_DM_VIDEO)
+	pin_mux_display();
+#endif
+	/* boot param addr */
+	gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
+
+	power_det_init();
+
+#ifdef CONFIG_SYS_I2C_TEGRA
+# ifdef CONFIG_TEGRA_PMU
+	if (pmu_set_nominal())
+		debug("Failed to select nominal voltages\n");
+#  ifdef CONFIG_TEGRA_CLOCK_SCALING
+	err = board_emc_init();
+	if (err)
+		debug("Memory controller init failed: %d\n", err);
+#  endif
+# endif /* CONFIG_TEGRA_PMU */
+#endif /* CONFIG_SYS_I2C_TEGRA */
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+	pin_mux_usb();
+#endif
+
+#if defined(CONFIG_DM_VIDEO)
+	board_id = tegra_board_id();
+	err = tegra_lcd_pmic_init(board_id);
+	if (err) {
+		debug("Failed to set up LCD PMIC\n");
+		return err;
+	}
+#endif
+
+#ifdef CONFIG_TEGRA_NAND
+	pin_mux_nand();
+#endif
+
+	tegra_xusb_padctl_init();
+
+#ifdef CONFIG_TEGRA_LP0
+	/* save Sdram params to PMC 2, 4, and 24 for WB0 */
+	warmboot_save_sdram_params();
+
+	/* prepare the WB code to LP0 location */
+	warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
+#endif
+	return nvidia_board_init();
+}
+
+void board_cleanup_before_linux(void)
+{
+	/* power down UPHY PLL */
+	tegra_xusb_padctl_exit();
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+static void __gpio_early_init(void)
+{
+}
+
+void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));
+
+int board_early_init_f(void)
+{
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
+	if (!clock_early_init_done())
+		clock_early_init();
+#endif
+
+#if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT)
+#define USBCMD_FS2 (1 << 15)
+	{
+		struct usb_ctlr *usbctlr = (struct usb_ctlr *)0x7d000000;
+		writel(USBCMD_FS2, &usbctlr->usb_cmd);
+	}
+#endif
+
+	/* Do any special system timer/TSC setup */
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
+#  if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
+	if (!tegra_cpu_is_non_secure())
+#  endif
+		arch_timer_init();
+#endif
+
+#if defined(CONFIG_DISABLE_SDMMC1_EARLY)
+	/*
+	 * Turn off (reset/disable) SDMMC1 on Nano here, before GPIO INIT.
+	 * We do this because earlier bootloaders have enabled power to
+	 * SDMMC1 on Nano, and toggling power-gpio (PZ3) in pinmux_init()
+	 * results in power being back-driven into the SD-card and SDMMC1
+	 * HW, which is 'bad' as per the HW team.
+	 *
+	 * From the HW team: "LDO2 from the PMIC has already been set to 3.3v in
+	 * nvtboot/CBoot on Nano (for SD-card boot). So when U-Boot's GPIO_INIT
+	 * table sets PZ3 to OUT0 as per the pinmux spreadsheet, it turns off
+	 * the loadswitch. When PZ3 is 0 and not driving, essentially the SDCard
+	 * voltage turns off. Since the SDCard voltage is no longer there, the
+	 * SDMMC CLK/DAT lines are backdriving into what essentially is a
+	 * powered-off SDCard, that's why the voltage drops from 3.3V to ~1.6V"
+	 *
+	 * Note that this can probably be removed when we change over to storing
+	 * all BL components on QSPI on Nano, and U-Boot then becomes the first
+	 * one to turn on SDMMC1 power. Another fix would be to have CBoot
+	 * disable power/gate SDMMC1 off before handing off to U-Boot/kernel.
+	 */
+	reset_set_enable(PERIPH_ID_SDMMC1, 1);
+	clock_set_enable(PERIPH_ID_SDMMC1, 0);
+#endif	/* CONFIG_DISABLE_SDMMC1_EARLY */
+
+	pinmux_init();
+	board_init_uart_f();
+
+	/* Initialize periph GPIOs */
+	gpio_early_init();
+	gpio_early_init_uart();
+
+	return 0;
+}
+#endif	/* EARLY_INIT */
+
+int board_late_init(void)
+{
+#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
+	if (tegra_cpu_is_non_secure()) {
+		printf("CPU is in NS mode\n");
+		env_set("cpu_ns_mode", "1");
+	} else {
+		env_set("cpu_ns_mode", "");
+	}
+#endif
+	start_cpu_fan();
+	cboot_late_init();
+
+	return 0;
+}
+
+/*
+ * In some SW environments, a memory carve-out exists to house a secure
+ * monitor, a trusted OS, and/or various statically allocated media buffers.
+ *
+ * This carveout exists at the highest possible address that is within a
+ * 32-bit physical address space.
+ *
+ * This function returns the total size of this carve-out. At present, the
+ * returned value is hard-coded for simplicity. In the future, it may be
+ * possible to determine the carve-out size:
+ * - By querying some run-time information source, such as:
+ *   - A structure passed to U-Boot by earlier boot software.
+ *   - SoC registers.
+ *   - A call into the secure monitor.
+ * - In the per-board U-Boot configuration header, based on knowledge of the
+ *   SW environment that U-Boot is being built for.
+ *
+ * For now, we support two configurations in U-Boot:
+ * - 32-bit ports without any form of carve-out.
+ * - 64 bit ports which are assumed to use a carve-out of a conservatively
+ *   hard-coded size.
+ */
+static ulong carveout_size(void)
+{
+#ifdef CONFIG_ARM64
+	return SZ_512M;
+#elif defined(CONFIG_ARMV7_SECURE_RESERVE_SIZE)
+	// BASE+SIZE might not == 4GB. If so, we want the carveout to cover
+	// from BASE to 4GB, not BASE to BASE+SIZE.
+	return (0 - CONFIG_ARMV7_SECURE_BASE) & ~(SZ_2M - 1);
+#else
+	return 0;
+#endif
+}
+
+/*
+ * Determine the amount of usable RAM below 4GiB, taking into account any
+ * carve-out that may be assigned.
+ */
+static ulong usable_ram_size_below_4g(void)
+{
+	ulong total_size_below_4g;
+	ulong usable_size_below_4g;
+
+	/*
+	 * The total size of RAM below 4GiB is the lesser address of:
+	 * (a) 2GiB itself (RAM starts at 2GiB, and 4GiB - 2GiB == 2GiB).
+	 * (b) The size RAM physically present in the system.
+	 */
+	if (gd->ram_size < SZ_2G)
+		total_size_below_4g = gd->ram_size;
+	else
+		total_size_below_4g = SZ_2G;
+
+	/* Calculate usable RAM by subtracting out any carve-out size */
+	usable_size_below_4g = total_size_below_4g - carveout_size();
+
+	return usable_size_below_4g;
+}
+
+/*
+ * Represent all available RAM in either one or two banks.
+ *
+ * The first bank describes any usable RAM below 4GiB.
+ * The second bank describes any RAM above 4GiB.
+ *
+ * This split is driven by the following requirements:
+ * - The NVIDIA L4T kernel requires separate entries in the DT /memory/reg
+ *   property for memory below and above the 4GiB boundary. The layout of that
+ *   DT property is directly driven by the entries in the U-Boot bank array.
+ * - The potential existence of a carve-out at the end of RAM below 4GiB can
+ *   only be represented using multiple banks.
+ *
+ * Explicitly removing the carve-out RAM from the bank entries makes the RAM
+ * layout a bit more obvious, e.g. when running "bdinfo" at the U-Boot
+ * command-line.
+ *
+ * This does mean that the DT U-Boot passes to the Linux kernel will not
+ * include this RAM in /memory/reg at all. An alternative would be to include
+ * all RAM in the U-Boot banks (and hence DT), and add a /memreserve/ node
+ * into DT to stop the kernel from using the RAM. IIUC, I don't /think/ the
+ * Linux kernel will ever need to access any RAM in* the carve-out via a CPU
+ * mapping, so either way is acceptable.
+ *
+ * On 32-bit systems, we never define a bank for RAM above 4GiB, since the
+ * start address of that bank cannot be represented in the 32-bit .size
+ * field.
+ */
+int dram_init_banksize(void)
+{
+	int err;
+
+	/* try to compute DRAM bank size based on cboot DTB first */
+	err = cboot_dram_init_banksize();
+	if (err == 0)
+		return err;
+
+	/* fall back to default DRAM bank size computation */
+
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = usable_ram_size_below_4g();
+
+#ifdef CONFIG_PCI
+	gd->pci_ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
+#endif
+
+#ifdef CONFIG_PHYS_64BIT
+	if (gd->ram_size > SZ_2G) {
+		gd->bd->bi_dram[1].start = 0x100000000;
+		gd->bd->bi_dram[1].size = gd->ram_size - SZ_2G;
+	} else
+#endif
+	{
+		gd->bd->bi_dram[1].start = 0;
+		gd->bd->bi_dram[1].size = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * Most hardware on 64-bit Tegra is still restricted to DMA to the lower
+ * 32-bits of the physical address space. Cap the maximum usable RAM area
+ * at 4 GiB to avoid DMA buffers from being allocated beyond the 32-bit
+ * boundary that most devices can address. Also, don't let U-Boot use any
+ * carve-out, as mentioned above.
+ *
+ * This function is called before dram_init_banksize(), so we can't simply
+ * return gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size.
+ */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	ulong ram_top;
+
+	/* try to get top of usable RAM based on cboot DTB first */
+	ram_top = cboot_get_usable_ram_top(total_size);
+	if (ram_top > 0)
+		return ram_top;
+
+	/* fall back to default usable RAM computation */
+
+	return CONFIG_SYS_SDRAM_BASE + usable_ram_size_below_4g();
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/cache.c b/roms/u-boot/arch/arm/mach-tegra/cache.c
new file mode 100644
index 000000000..d7063490e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/cache.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra cache routines */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch-tegra/ap.h>
+#if IS_ENABLED(CONFIG_TEGRA_GP_PADCTRL)
+#include <asm/arch/gp_padctrl.h>
+#endif
+
+#ifndef CONFIG_ARM64
+void config_cache(void)
+{
+	u32 reg = 0;
+
+	/* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */
+	asm volatile(
+		"mrc p15, 0, r0, c1, c0, 1\n"
+		"orr r0, r0, #0x41\n"
+		"mcr p15, 0, r0, c1, c0, 1\n");
+
+	/* Currently, only Tegra114+ needs this L2 cache change to boot Linux */
+	if (tegra_get_chip() < CHIPID_TEGRA114)
+		return;
+
+	/*
+	 * Systems with an architectural L2 cache must not use the PL310.
+	 * Config L2CTLR here for a data RAM latency of 3 cycles.
+	 */
+	asm("mrc p15, 1, %0, c9, c0, 2" : : "r" (reg));
+	reg &= ~7;
+	reg |= 2;
+	asm("mcr p15, 1, %0, c9, c0, 2" : : "r" (reg));
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/cboot.c b/roms/u-boot/arch/arm/mach-tegra/cboot.c
new file mode 100644
index 000000000..55eb81986
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/cboot.c
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2016-2018, NVIDIA CORPORATION.
+ */
+
+#include <common.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <fdtdec.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <malloc.h>
+#include <net.h>
+#include <stdlib.h>
+#include <string.h>
+#include <asm/global_data.h>
+
+#include <linux/ctype.h>
+#include <linux/sizes.h>
+
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/cboot.h>
+#include <asm/armv8/mmu.h>
+
+/*
+ * Size of a region that's large enough to hold the relocated U-Boot and all
+ * other allocations made around it (stack, heap, page tables, etc.)
+ * In practice, running "bdinfo" at the shell prompt, the stack reaches about
+ * 5MB from the address selected for ram_top as of the time of writing,
+ * so a 16MB region should be plenty.
+ */
+#define MIN_USABLE_RAM_SIZE SZ_16M
+/*
+ * The amount of space we expect to require for stack usage. Used to validate
+ * that all reservations fit into the region selected for the relocation target
+ */
+#define MIN_USABLE_STACK_SIZE SZ_1M
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern struct mm_region tegra_mem_map[];
+
+/*
+ * These variables are written to before relocation, and hence cannot be
+ * in.bss, since .bss overlaps the DTB that's appended to the U-Boot binary.
+ * The section attribute forces this into .data and avoids this issue. This
+ * also has the nice side-effect of the content being valid after relocation.
+ */
+
+/* The number of valid entries in ram_banks[] */
+static int ram_bank_count __section(".data");
+
+/*
+ * The usable top-of-RAM for U-Boot. This is both:
+ * a) Below 4GB to avoid issues with peripherals that use 32-bit addressing.
+ * b) At the end of a region that has enough space to hold the relocated U-Boot
+ *    and all other allocations made around it (stack, heap, page tables, etc.)
+ */
+static u64 ram_top __section(".data");
+/* The base address of the region of RAM that ends at ram_top */
+static u64 region_base __section(".data");
+
+/*
+ * Explicitly put this in the .data section because it is written before the
+ * .bss section is zeroed out but it needs to persist.
+ */
+unsigned long cboot_boot_x0 __section(".data");
+
+void cboot_save_boot_params(unsigned long x0, unsigned long x1,
+			    unsigned long x2, unsigned long x3)
+{
+	cboot_boot_x0 = x0;
+}
+
+int cboot_dram_init(void)
+{
+	unsigned int na, ns;
+	const void *cboot_blob = (void *)cboot_boot_x0;
+	int node, len, i;
+	const u32 *prop;
+
+	if (!cboot_blob)
+		return -EINVAL;
+
+	na = fdtdec_get_uint(cboot_blob, 0, "#address-cells", 2);
+	ns = fdtdec_get_uint(cboot_blob, 0, "#size-cells", 2);
+
+	node = fdt_path_offset(cboot_blob, "/memory");
+	if (node < 0) {
+		pr_err("Can't find /memory node in cboot DTB");
+		hang();
+	}
+	prop = fdt_getprop(cboot_blob, node, "reg", &len);
+	if (!prop) {
+		pr_err("Can't find /memory/reg property in cboot DTB");
+		hang();
+	}
+
+	/* Calculate the true # of base/size pairs to read */
+	len /= 4;		/* Convert bytes to number of cells */
+	len /= (na + ns);	/* Convert cells to number of banks */
+	if (len > CONFIG_NR_DRAM_BANKS)
+		len = CONFIG_NR_DRAM_BANKS;
+
+	/* Parse the /memory node, and save useful entries */
+	gd->ram_size = 0;
+	ram_bank_count = 0;
+	for (i = 0; i < len; i++) {
+		u64 bank_start, bank_end, bank_size, usable_bank_size;
+
+		/* Extract raw memory region data from DTB */
+		bank_start = fdt_read_number(prop, na);
+		prop += na;
+		bank_size = fdt_read_number(prop, ns);
+		prop += ns;
+		gd->ram_size += bank_size;
+		bank_end = bank_start + bank_size;
+		debug("Bank %d: %llx..%llx (+%llx)\n", i,
+		      bank_start, bank_end, bank_size);
+
+		/*
+		 * Align the bank to MMU section size. This is not strictly
+		 * necessary, since the translation table construction code
+		 * handles page granularity without issue. However, aligning
+		 * the MMU entries reduces the size and number of levels in the
+		 * page table, so is worth it.
+		 */
+		bank_start = ROUND(bank_start, SZ_2M);
+		bank_end = bank_end & ~(SZ_2M - 1);
+		bank_size = bank_end - bank_start;
+		debug("  aligned: %llx..%llx (+%llx)\n",
+		      bank_start, bank_end, bank_size);
+		if (bank_end <= bank_start)
+			continue;
+
+		/* Record data used to create MMU translation tables */
+		ram_bank_count++;
+		/* Index below is deliberately 1-based to skip MMIO entry */
+		tegra_mem_map[ram_bank_count].virt = bank_start;
+		tegra_mem_map[ram_bank_count].phys = bank_start;
+		tegra_mem_map[ram_bank_count].size = bank_size;
+		tegra_mem_map[ram_bank_count].attrs =
+			PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_INNER_SHARE;
+
+		/* Determine best bank to relocate U-Boot into */
+		if (bank_end > SZ_4G)
+			bank_end = SZ_4G;
+		debug("  end  %llx (usable)\n", bank_end);
+		usable_bank_size = bank_end - bank_start;
+		debug("  size %llx (usable)\n", usable_bank_size);
+		if ((usable_bank_size >= MIN_USABLE_RAM_SIZE) &&
+		    (bank_end > ram_top)) {
+			ram_top = bank_end;
+			region_base = bank_start;
+			debug("ram top now %llx\n", ram_top);
+		}
+	}
+
+	/* Ensure memory map contains the desired sentinel entry */
+	tegra_mem_map[ram_bank_count + 1].virt = 0;
+	tegra_mem_map[ram_bank_count + 1].phys = 0;
+	tegra_mem_map[ram_bank_count + 1].size = 0;
+	tegra_mem_map[ram_bank_count + 1].attrs = 0;
+
+	/* Error out if a relocation target couldn't be found */
+	if (!ram_top) {
+		pr_err("Can't find a usable RAM top");
+		hang();
+	}
+
+	return 0;
+}
+
+int cboot_dram_init_banksize(void)
+{
+	int i;
+
+	if (ram_bank_count == 0)
+		return -EINVAL;
+
+	if ((gd->start_addr_sp - region_base) < MIN_USABLE_STACK_SIZE) {
+		pr_err("Reservations exceed chosen region size");
+		hang();
+	}
+
+	for (i = 0; i < ram_bank_count; i++) {
+		gd->bd->bi_dram[i].start = tegra_mem_map[1 + i].virt;
+		gd->bd->bi_dram[i].size = tegra_mem_map[1 + i].size;
+	}
+
+#ifdef CONFIG_PCI
+	gd->pci_ram_top = ram_top;
+#endif
+
+	return 0;
+}
+
+ulong cboot_get_usable_ram_top(ulong total_size)
+{
+	return ram_top;
+}
+
+/*
+ * The following few functions run late during the boot process and dynamically
+ * calculate the load address of various binaries. To keep track of multiple
+ * allocations, some writable list of RAM banks must be used. tegra_mem_map[]
+ * is used for this purpose to avoid making yet another copy of the list of RAM
+ * banks. This is safe because tegra_mem_map[] is only used once during very
+ * early boot to create U-Boot's page tables, long before this code runs. If
+ * this assumption becomes invalid later, we can just fix the code to copy the
+ * list of RAM banks into some private data structure before running.
+ */
+
+static char *gen_varname(const char *var, const char *ext)
+{
+	size_t len_var = strlen(var);
+	size_t len_ext = strlen(ext);
+	size_t len = len_var + len_ext + 1;
+	char *varext = malloc(len);
+
+	if (!varext)
+		return 0;
+	strcpy(varext, var);
+	strcpy(varext + len_var, ext);
+	return varext;
+}
+
+static void mark_ram_allocated(int bank, u64 allocated_start, u64 allocated_end)
+{
+	u64 bank_start = tegra_mem_map[bank].virt;
+	u64 bank_size = tegra_mem_map[bank].size;
+	u64 bank_end = bank_start + bank_size;
+	bool keep_front = allocated_start != bank_start;
+	bool keep_tail = allocated_end != bank_end;
+
+	if (keep_front && keep_tail) {
+		/*
+		 * There are CONFIG_NR_DRAM_BANKS DRAM entries in the array,
+		 * starting at index 1 (index 0 is MMIO). So, we are at DRAM
+		 * entry "bank" not "bank - 1" as for a typical 0-base array.
+		 * The number of remaining DRAM entries is therefore
+		 * "CONFIG_NR_DRAM_BANKS - bank". We want to duplicate the
+		 * current entry and shift up the remaining entries, dropping
+		 * the last one. Thus, we must copy one fewer entry than the
+		 * number remaining.
+		 */
+		memmove(&tegra_mem_map[bank + 1], &tegra_mem_map[bank],
+			CONFIG_NR_DRAM_BANKS - bank - 1);
+		tegra_mem_map[bank].size = allocated_start - bank_start;
+		bank++;
+		tegra_mem_map[bank].virt = allocated_end;
+		tegra_mem_map[bank].phys = allocated_end;
+		tegra_mem_map[bank].size = bank_end - allocated_end;
+	} else if (keep_front) {
+		tegra_mem_map[bank].size = allocated_start - bank_start;
+	} else if (keep_tail) {
+		tegra_mem_map[bank].virt = allocated_end;
+		tegra_mem_map[bank].phys = allocated_end;
+		tegra_mem_map[bank].size = bank_end - allocated_end;
+	} else {
+		/*
+		 * We could move all subsequent banks down in the array but
+		 * that's not necessary for subsequent allocations to work, so
+		 * we skip doing so.
+		 */
+		tegra_mem_map[bank].size = 0;
+	}
+}
+
+static void reserve_ram(u64 start, u64 size)
+{
+	int bank;
+	u64 end = start + size;
+
+	for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) {
+		u64 bank_start = tegra_mem_map[bank].virt;
+		u64 bank_size = tegra_mem_map[bank].size;
+		u64 bank_end = bank_start + bank_size;
+
+		if (end <= bank_start || start > bank_end)
+			continue;
+		mark_ram_allocated(bank, start, end);
+		break;
+	}
+}
+
+static u64 alloc_ram(u64 size, u64 align, u64 offset)
+{
+	int bank;
+
+	for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) {
+		u64 bank_start = tegra_mem_map[bank].virt;
+		u64 bank_size = tegra_mem_map[bank].size;
+		u64 bank_end = bank_start + bank_size;
+		u64 allocated = ROUND(bank_start, align) + offset;
+		u64 allocated_end = allocated + size;
+
+		if (allocated_end > bank_end)
+			continue;
+		mark_ram_allocated(bank, allocated, allocated_end);
+		return allocated;
+	}
+	return 0;
+}
+
+static void set_calculated_aliases(char *aliases, u64 address)
+{
+	char *tmp, *alias;
+	int err;
+
+	aliases = strdup(aliases);
+	if (!aliases) {
+		pr_err("strdup(aliases) failed");
+		return;
+	}
+
+	tmp = aliases;
+	while (true) {
+		alias = strsep(&tmp, " ");
+		if (!alias)
+			break;
+		debug("%s: alias: %s\n", __func__, alias);
+		err = env_set_hex(alias, address);
+		if (err)
+			pr_err("Could not set %s\n", alias);
+	}
+
+	free(aliases);
+}
+
+static void set_calculated_env_var(const char *var)
+{
+	char *var_size;
+	char *var_align;
+	char *var_offset;
+	char *var_aliases;
+	u64 size;
+	u64 align;
+	u64 offset;
+	char *aliases;
+	u64 address;
+	int err;
+
+	var_size = gen_varname(var, "_size");
+	if (!var_size)
+		return;
+	var_align = gen_varname(var, "_align");
+	if (!var_align)
+		goto out_free_var_size;
+	var_offset = gen_varname(var, "_offset");
+	if (!var_offset)
+		goto out_free_var_align;
+	var_aliases = gen_varname(var, "_aliases");
+	if (!var_aliases)
+		goto out_free_var_offset;
+
+	size = env_get_hex(var_size, 0);
+	if (!size) {
+		pr_err("%s not set or zero\n", var_size);
+		goto out_free_var_aliases;
+	}
+	align = env_get_hex(var_align, 1);
+	/* Handle extant variables, but with a value of 0 */
+	if (!align)
+		align = 1;
+	offset = env_get_hex(var_offset, 0);
+	aliases = env_get(var_aliases);
+
+	debug("%s: Calc var %s; size=%llx, align=%llx, offset=%llx\n",
+	      __func__, var, size, align, offset);
+	if (aliases)
+		debug("%s: Aliases: %s\n", __func__, aliases);
+
+	address = alloc_ram(size, align, offset);
+	if (!address) {
+		pr_err("Could not allocate %s\n", var);
+		goto out_free_var_aliases;
+	}
+	debug("%s: Address %llx\n", __func__, address);
+
+	err = env_set_hex(var, address);
+	if (err)
+		pr_err("Could not set %s\n", var);
+	if (aliases)
+		set_calculated_aliases(aliases, address);
+
+out_free_var_aliases:
+	free(var_aliases);
+out_free_var_offset:
+	free(var_offset);
+out_free_var_align:
+	free(var_align);
+out_free_var_size:
+	free(var_size);
+}
+
+#ifdef DEBUG
+static void dump_ram_banks(void)
+{
+	int bank;
+
+	for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) {
+		u64 bank_start = tegra_mem_map[bank].virt;
+		u64 bank_size = tegra_mem_map[bank].size;
+		u64 bank_end = bank_start + bank_size;
+
+		if (!bank_size)
+			continue;
+		printf("%d: %010llx..%010llx (+%010llx)\n", bank - 1,
+		       bank_start, bank_end, bank_size);
+	}
+}
+#endif
+
+static void set_calculated_env_vars(void)
+{
+	char *vars, *tmp, *var;
+
+#ifdef DEBUG
+	printf("RAM banks before any calculated env. var.s:\n");
+	dump_ram_banks();
+#endif
+
+	reserve_ram(cboot_boot_x0, fdt_totalsize(cboot_boot_x0));
+
+#ifdef DEBUG
+	printf("RAM after reserving cboot DTB:\n");
+	dump_ram_banks();
+#endif
+
+	vars = env_get("calculated_vars");
+	if (!vars) {
+		debug("%s: No env var calculated_vars\n", __func__);
+		return;
+	}
+
+	vars = strdup(vars);
+	if (!vars) {
+		pr_err("strdup(calculated_vars) failed");
+		return;
+	}
+
+	tmp = vars;
+	while (true) {
+		var = strsep(&tmp, " ");
+		if (!var)
+			break;
+		debug("%s: var: %s\n", __func__, var);
+		set_calculated_env_var(var);
+#ifdef DEBUG
+		printf("RAM banks after allocating %s:\n", var);
+		dump_ram_banks();
+#endif
+	}
+
+	free(vars);
+}
+
+static int set_fdt_addr(void)
+{
+	int ret;
+
+	ret = env_set_hex("fdt_addr", cboot_boot_x0);
+	if (ret) {
+		printf("Failed to set fdt_addr to point at DTB: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Attempt to use /chosen/nvidia,ether-mac in the cboot DTB to U-Boot's
+ * ethaddr environment variable if possible.
+ */
+static int cboot_get_ethaddr_legacy(const void *fdt, uint8_t mac[ETH_ALEN])
+{
+	const char *const properties[] = {
+		"nvidia,ethernet-mac",
+		"nvidia,ether-mac",
+	};
+	const char *prop;
+	unsigned int i;
+	int node, len;
+
+	node = fdt_path_offset(fdt, "/chosen");
+	if (node < 0) {
+		printf("Can't find /chosen node in cboot DTB\n");
+		return node;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(properties); i++) {
+		prop = fdt_getprop(fdt, node, properties[i], &len);
+		if (prop)
+			break;
+	}
+
+	if (!prop) {
+		printf("Can't find Ethernet MAC address in cboot DTB\n");
+		return -ENOENT;
+	}
+
+	string_to_enetaddr(prop, mac);
+
+	if (!is_valid_ethaddr(mac)) {
+		printf("Invalid MAC address: %s\n", prop);
+		return -EINVAL;
+	}
+
+	debug("Legacy MAC address: %pM\n", mac);
+
+	return 0;
+}
+
+int cboot_get_ethaddr(const void *fdt, uint8_t mac[ETH_ALEN])
+{
+	int node, len, err = 0;
+	const uchar *prop;
+	const char *path;
+
+	path = fdt_get_alias(fdt, "ethernet");
+	if (!path) {
+		err = -ENOENT;
+		goto out;
+	}
+
+	debug("ethernet alias found: %s\n", path);
+
+	node = fdt_path_offset(fdt, path);
+	if (node < 0) {
+		err = -ENOENT;
+		goto out;
+	}
+
+	prop = fdt_getprop(fdt, node, "local-mac-address", &len);
+	if (!prop) {
+		err = -ENOENT;
+		goto out;
+	}
+
+	if (len != ETH_ALEN) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	debug("MAC address: %pM\n", prop);
+	memcpy(mac, prop, ETH_ALEN);
+
+out:
+	if (err < 0)
+		err = cboot_get_ethaddr_legacy(fdt, mac);
+
+	return err;
+}
+
+static char *strip(const char *ptr)
+{
+	const char *end;
+
+	while (*ptr && isblank(*ptr))
+		ptr++;
+
+	/* empty string */
+	if (*ptr == '\0')
+		return strdup(ptr);
+
+	end = ptr;
+
+	while (end[1])
+		end++;
+
+	while (isblank(*end))
+		end--;
+
+	return strndup(ptr, end - ptr + 1);
+}
+
+static char *cboot_get_bootargs(const void *fdt)
+{
+	const char *args;
+	int offset, len;
+
+	offset = fdt_path_offset(fdt, "/chosen");
+	if (offset < 0)
+		return NULL;
+
+	args = fdt_getprop(fdt, offset, "bootargs", &len);
+	if (!args)
+		return NULL;
+
+	return strip(args);
+}
+
+int cboot_late_init(void)
+{
+	const void *fdt = (const void *)cboot_boot_x0;
+	uint8_t mac[ETH_ALEN];
+	char *bootargs;
+	int err;
+
+	set_calculated_env_vars();
+	/*
+	 * Ignore errors here; the value may not be used depending on
+	 * extlinux.conf or boot script content.
+	 */
+	set_fdt_addr();
+
+	/* Ignore errors here; not all cases care about Ethernet addresses */
+	err = cboot_get_ethaddr(fdt, mac);
+	if (!err) {
+		void *blob = (void *)gd->fdt_blob;
+
+		err = fdtdec_set_ethernet_mac_address(blob, mac, sizeof(mac));
+		if (err < 0)
+			printf("failed to set MAC address %pM: %d\n", mac, err);
+	}
+
+	bootargs = cboot_get_bootargs(fdt);
+	if (bootargs) {
+		env_set("cbootargs", bootargs);
+		free(bootargs);
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/clock.c b/roms/u-boot/arch/arm/mach-tegra/clock.c
new file mode 100644
index 000000000..18c19dbf6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/clock.c
@@ -0,0 +1,842 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2019, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra SoC common clock control functions */
+
+#include <common.h>
+#include <div64.h>
+#include <dm.h>
+#include <errno.h>
+#include <log.h>
+#include <time.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/timer.h>
+#include <linux/delay.h>
+
+/*
+ * This is our record of the current clock rate of each clock. We don't
+ * fill all of these in since we are only really interested in clocks which
+ * we use as parents.
+ */
+static unsigned pll_rate[CLOCK_ID_COUNT];
+
+/*
+ * The oscillator frequency is fixed to one of four set values. Based on this
+ * the other clocks are set up appropriately.
+ */
+static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
+	13000000,
+	19200000,
+	12000000,
+	26000000,
+	38400000,
+	48000000,
+};
+
+/* return 1 if a peripheral ID is in range */
+#define clock_type_id_isvalid(id) ((id) >= 0 && \
+		(id) < CLOCK_TYPE_COUNT)
+
+char pllp_valid = 1;	/* PLLP is set up correctly */
+
+/* return 1 if a periphc_internal_id is in range */
+#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
+		(id) < PERIPHC_COUNT)
+
+/* number of clock outputs of a PLL */
+static const u8 pll_num_clkouts[] = {
+	1,	/* PLLC */
+	1,	/* PLLM */
+	4,	/* PLLP */
+	1,	/* PLLA */
+	0,	/* PLLU */
+	0,	/* PLLD */
+};
+
+int clock_get_osc_bypass(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
+}
+
+/* Returns a pointer to the registers of the given pll */
+static struct clk_pll *get_pll(enum clock_id clkid)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+	assert(clock_id_is_pll(clkid));
+	if (clkid >= (enum clock_id)TEGRA_CLK_PLLS) {
+		debug("%s: Invalid PLL %d\n", __func__, clkid);
+		return NULL;
+	}
+	return &clkrst->crc_pll[clkid];
+}
+
+__weak struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid)
+{
+	return NULL;
+}
+
+int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
+		u32 *divp, u32 *cpcon, u32 *lfcon)
+{
+	struct clk_pll *pll = get_pll(clkid);
+	struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
+	u32 data;
+
+	assert(clkid != CLOCK_ID_USB);
+
+	/* Safety check, adds to code size but is small */
+	if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
+		return -1;
+	data = readl(&pll->pll_base);
+	*divm = (data >> pllinfo->m_shift) & pllinfo->m_mask;
+	*divn = (data >> pllinfo->n_shift) & pllinfo->n_mask;
+	*divp = (data >> pllinfo->p_shift) & pllinfo->p_mask;
+	data = readl(&pll->pll_misc);
+	/* NOTE: On T210, cpcon/lfcon no longer exist, moved to KCP/KVCO */
+	*cpcon = (data >> pllinfo->kcp_shift) & pllinfo->kcp_mask;
+	*lfcon = (data >> pllinfo->kvco_shift) & pllinfo->kvco_mask;
+
+	return 0;
+}
+
+unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
+		u32 divp, u32 cpcon, u32 lfcon)
+{
+	struct clk_pll *pll = NULL;
+	struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
+	struct clk_pll_simple *simple_pll = NULL;
+	u32 misc_data, data;
+
+	if (clkid < (enum clock_id)TEGRA_CLK_PLLS) {
+		pll = get_pll(clkid);
+	} else {
+		simple_pll = clock_get_simple_pll(clkid);
+		if (!simple_pll) {
+			debug("%s: Uknown simple PLL %d\n", __func__, clkid);
+			return 0;
+		}
+	}
+
+	/*
+	 * pllinfo has the m/n/p and kcp/kvco mask and shift
+	 * values for all of the PLLs used in U-Boot, with any
+	 * SoC differences accounted for.
+	 *
+	 * Preserve EN_LOCKDET, etc.
+	 */
+	if (pll)
+		misc_data = readl(&pll->pll_misc);
+	else
+		misc_data = readl(&simple_pll->pll_misc);
+	misc_data &= ~(pllinfo->kcp_mask << pllinfo->kcp_shift);
+	misc_data |= cpcon << pllinfo->kcp_shift;
+	misc_data &= ~(pllinfo->kvco_mask << pllinfo->kvco_shift);
+	misc_data |= lfcon << pllinfo->kvco_shift;
+
+	data = (divm << pllinfo->m_shift) | (divn << pllinfo->n_shift);
+	data |= divp << pllinfo->p_shift;
+	data |= (1 << PLL_ENABLE_SHIFT);	/* BYPASS s/b 0 already */
+
+	if (pll) {
+		writel(misc_data, &pll->pll_misc);
+		writel(data, &pll->pll_base);
+	} else {
+		writel(misc_data, &simple_pll->pll_misc);
+		writel(data, &simple_pll->pll_base);
+	}
+
+	/* calculate the stable time */
+	return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
+}
+
+void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
+			unsigned divisor)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+	u32 value;
+
+	value = readl(reg);
+
+	value &= ~OUT_CLK_SOURCE_31_30_MASK;
+	value |= source << OUT_CLK_SOURCE_31_30_SHIFT;
+
+	value &= ~OUT_CLK_DIVISOR_MASK;
+	value |= divisor << OUT_CLK_DIVISOR_SHIFT;
+
+	writel(value, reg);
+}
+
+int clock_ll_set_source_bits(enum periph_id periph_id, int mux_bits,
+			     unsigned source)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+
+	switch (mux_bits) {
+	case MASK_BITS_31_30:
+		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK,
+				source << OUT_CLK_SOURCE_31_30_SHIFT);
+		break;
+
+	case MASK_BITS_31_29:
+		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_29_MASK,
+				source << OUT_CLK_SOURCE_31_29_SHIFT);
+		break;
+
+	case MASK_BITS_31_28:
+		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_28_MASK,
+				source << OUT_CLK_SOURCE_31_28_SHIFT);
+		break;
+
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static int clock_ll_get_source_bits(enum periph_id periph_id, int mux_bits)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+	u32 val = readl(reg);
+
+	switch (mux_bits) {
+	case MASK_BITS_31_30:
+		val >>= OUT_CLK_SOURCE_31_30_SHIFT;
+		val &= OUT_CLK_SOURCE_31_30_MASK;
+		return val;
+	case MASK_BITS_31_29:
+		val >>= OUT_CLK_SOURCE_31_29_SHIFT;
+		val &= OUT_CLK_SOURCE_31_29_MASK;
+		return val;
+	case MASK_BITS_31_28:
+		val >>= OUT_CLK_SOURCE_31_28_SHIFT;
+		val &= OUT_CLK_SOURCE_31_28_MASK;
+		return val;
+	default:
+		return -1;
+	}
+}
+
+void clock_ll_set_source(enum periph_id periph_id, unsigned source)
+{
+	clock_ll_set_source_bits(periph_id, MASK_BITS_31_30, source);
+}
+
+/**
+ * Given the parent's rate and the required rate for the children, this works
+ * out the peripheral clock divider to use, in 7.1 binary format.
+ *
+ * @param divider_bits	number of divider bits (8 or 16)
+ * @param parent_rate	clock rate of parent clock in Hz
+ * @param rate		required clock rate for this clock
+ * @return divider which should be used
+ */
+static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
+			   unsigned long rate)
+{
+	u64 divider = parent_rate * 2;
+	unsigned max_divider = 1 << divider_bits;
+
+	divider += rate - 1;
+	do_div(divider, rate);
+
+	if ((s64)divider - 2 < 0)
+		return 0;
+
+	if ((s64)divider - 2 >= max_divider)
+		return -1;
+
+	return divider - 2;
+}
+
+int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate)
+{
+	struct clk_pll *pll = get_pll(clkid);
+	int data = 0, div = 0, offset = 0;
+
+	if (!clock_id_is_pll(clkid))
+		return -1;
+
+	if (pllout + 1 > pll_num_clkouts[clkid])
+		return -1;
+
+	div = clk_get_divider(8, pll_rate[clkid], rate);
+
+	if (div < 0)
+		return -1;
+
+	/* out2 and out4 are in the high part of the register */
+	if (pllout == PLL_OUT2 || pllout == PLL_OUT4)
+		offset = 16;
+
+	data = (div << PLL_OUT_RATIO_SHIFT) |
+			PLL_OUT_OVRRIDE | PLL_OUT_CLKEN | PLL_OUT_RSTN;
+	clrsetbits_le32(&pll->pll_out[pllout >> 1],
+			PLL_OUT_RATIO_MASK << offset, data << offset);
+
+	return 0;
+}
+
+/**
+ * Given the parent's rate and the divider in 7.1 format, this works out the
+ * resulting peripheral clock rate.
+ *
+ * @param parent_rate	clock rate of parent clock in Hz
+ * @param divider which should be used in 7.1 format
+ * @return effective clock rate of peripheral
+ */
+static unsigned long get_rate_from_divider(unsigned long parent_rate,
+					   int divider)
+{
+	u64 rate;
+
+	rate = (u64)parent_rate * 2;
+	do_div(rate, divider + 2);
+	return rate;
+}
+
+unsigned long clock_get_periph_rate(enum periph_id periph_id,
+		enum clock_id parent)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+	unsigned parent_rate = pll_rate[parent];
+	int div = (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT;
+
+	switch (periph_id) {
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+	case PERIPH_ID_UART4:
+	case PERIPH_ID_UART5:
+#ifdef CONFIG_TEGRA20
+		/* There's no divider for these clocks in this SoC. */
+		return parent_rate;
+#else
+		/*
+		 * This undoes the +2 in get_rate_from_divider() which I
+		 * believe is incorrect. Ideally we would fix
+		 * get_rate_from_divider(), but... Removing the +2 from
+		 * get_rate_from_divider() would probably require remove the -2
+		 * from the tail of clk_get_divider() since I believe that's
+		 * only there to invert get_rate_from_divider()'s +2. Observe
+		 * how find_best_divider() uses those two functions together.
+		 * However, doing so breaks other stuff, such as Seaboard's
+		 * display, likely due to clock_set_pllout()'s call to
+		 * clk_get_divider(). Attempting to fix that by making
+		 * clock_set_pllout() subtract 2 from clk_get_divider()'s
+		 * return value doesn't help. In summary this clock driver is
+		 * quite broken but I'm afraid I have no idea how to fix it
+		 * without completely replacing it.
+		 *
+		 * Be careful to avoid a divide by zero error.
+		 */
+		if (div >= 1)
+			div -= 2;
+		break;
+#endif
+	default:
+		break;
+	}
+
+	return get_rate_from_divider(parent_rate, div);
+}
+
+/**
+ * Find the best available 7.1 format divisor given a parent clock rate and
+ * required child clock rate. This function assumes that a second-stage
+ * divisor is available which can divide by powers of 2 from 1 to 256.
+ *
+ * @param divider_bits	number of divider bits (8 or 16)
+ * @param parent_rate	clock rate of parent clock in Hz
+ * @param rate		required clock rate for this clock
+ * @param extra_div	value for the second-stage divisor (not set if this
+ *			function returns -1.
+ * @return divider which should be used, or -1 if nothing is valid
+ *
+ */
+static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
+				unsigned long rate, int *extra_div)
+{
+	int shift;
+	int best_divider = -1;
+	int best_error = rate;
+
+	/* try dividers from 1 to 256 and find closest match */
+	for (shift = 0; shift <= 8 && best_error > 0; shift++) {
+		unsigned divided_parent = parent_rate >> shift;
+		int divider = clk_get_divider(divider_bits, divided_parent,
+						rate);
+		unsigned effective_rate = get_rate_from_divider(divided_parent,
+						divider);
+		int error = rate - effective_rate;
+
+		/* Given a valid divider, look for the lowest error */
+		if (divider != -1 && error < best_error) {
+			best_error = error;
+			*extra_div = 1 << shift;
+			best_divider = divider;
+		}
+	}
+
+	/* return what we found - *extra_div will already be set */
+	return best_divider;
+}
+
+/**
+ * Adjust peripheral PLL to use the given divider and source.
+ *
+ * @param periph_id	peripheral to adjust
+ * @param source	Source number (0-3 or 0-7)
+ * @param mux_bits	Number of mux bits (2 or 4)
+ * @param divider	Required divider in 7.1 or 15.1 format
+ * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
+ *		for this peripheral)
+ */
+static int adjust_periph_pll(enum periph_id periph_id, int source,
+				int mux_bits, unsigned divider)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+
+	clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
+			divider << OUT_CLK_DIVISOR_SHIFT);
+	udelay(1);
+
+	/* work out the source clock and set it */
+	if (source < 0)
+		return -1;
+
+	clock_ll_set_source_bits(periph_id, mux_bits, source);
+
+	udelay(2);
+	return 0;
+}
+
+enum clock_id clock_get_periph_parent(enum periph_id periph_id)
+{
+	int err, mux_bits, divider_bits, type;
+	int source;
+
+	err = get_periph_clock_info(periph_id, &mux_bits, &divider_bits, &type);
+	if (err)
+		return CLOCK_ID_NONE;
+
+	source = clock_ll_get_source_bits(periph_id, mux_bits);
+
+	return get_periph_clock_id(periph_id, source);
+}
+
+unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
+		enum clock_id parent, unsigned rate, int *extra_div)
+{
+	unsigned effective_rate;
+	int mux_bits, divider_bits, source;
+	int divider;
+	int xdiv = 0;
+
+	/* work out the source clock and set it */
+	source = get_periph_clock_source(periph_id, parent, &mux_bits,
+					 &divider_bits);
+
+	divider = find_best_divider(divider_bits, pll_rate[parent],
+				    rate, &xdiv);
+	if (extra_div)
+		*extra_div = xdiv;
+
+	assert(divider >= 0);
+	if (adjust_periph_pll(periph_id, source, mux_bits, divider))
+		return -1U;
+	debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
+		get_periph_source_reg(periph_id),
+		readl(get_periph_source_reg(periph_id)));
+
+	/* Check what we ended up with. This shouldn't matter though */
+	effective_rate = clock_get_periph_rate(periph_id, parent);
+	if (extra_div)
+		effective_rate /= *extra_div;
+	if (rate != effective_rate)
+		debug("Requested clock rate %u not honored (got %u)\n",
+			rate, effective_rate);
+	return effective_rate;
+}
+
+unsigned clock_start_periph_pll(enum periph_id periph_id,
+		enum clock_id parent, unsigned rate)
+{
+	unsigned effective_rate;
+
+	reset_set_enable(periph_id, 1);
+	clock_enable(periph_id);
+	udelay(2);
+
+	effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
+						 NULL);
+
+	reset_set_enable(periph_id, 0);
+	return effective_rate;
+}
+
+void clock_enable(enum periph_id clkid)
+{
+	clock_set_enable(clkid, 1);
+}
+
+void clock_disable(enum periph_id clkid)
+{
+	clock_set_enable(clkid, 0);
+}
+
+void reset_periph(enum periph_id periph_id, int us_delay)
+{
+	/* Put peripheral into reset */
+	reset_set_enable(periph_id, 1);
+	udelay(us_delay);
+
+	/* Remove reset */
+	reset_set_enable(periph_id, 0);
+
+	udelay(us_delay);
+}
+
+void reset_cmplx_set_enable(int cpu, int which, int reset)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 mask;
+
+	/* Form the mask, which depends on the cpu chosen (2 or 4) */
+	assert(cpu >= 0 && cpu < MAX_NUM_CPU);
+	mask = which << cpu;
+
+	/* either enable or disable those reset for that CPU */
+	if (reset)
+		writel(mask, &clkrst->crc_cpu_cmplx_set);
+	else
+		writel(mask, &clkrst->crc_cpu_cmplx_clr);
+}
+
+unsigned int __weak clk_m_get_rate(unsigned int parent_rate)
+{
+	return parent_rate;
+}
+
+unsigned clock_get_rate(enum clock_id clkid)
+{
+	struct clk_pll *pll;
+	u32 base, divm;
+	u64 parent_rate, rate;
+	struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
+
+	parent_rate = osc_freq[clock_get_osc_freq()];
+	if (clkid == CLOCK_ID_OSC)
+		return parent_rate;
+
+	if (clkid == CLOCK_ID_CLK_M)
+		return clk_m_get_rate(parent_rate);
+
+	pll = get_pll(clkid);
+	if (!pll)
+		return 0;
+	base = readl(&pll->pll_base);
+
+	rate = parent_rate * ((base >> pllinfo->n_shift) & pllinfo->n_mask);
+	divm = (base >> pllinfo->m_shift) & pllinfo->m_mask;
+	/*
+	 * PLLU uses p_mask/p_shift for VCO on all but T210,
+	 * T210 uses normal DIVP. Handled in pllinfo table.
+	 */
+#ifdef CONFIG_TEGRA210
+	/*
+	 * PLLP's primary output (pllP_out0) on T210 is the VCO, and divp is
+	 * not applied. pllP_out2 does have divp applied. All other pllP_outN
+	 * are divided down from pllP_out0. We only support pllP_out0 in
+	 * U-Boot at the time of writing this comment.
+	 */
+	if (clkid != CLOCK_ID_PERIPH)
+#endif
+		divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask;
+	do_div(rate, divm);
+	return rate;
+}
+
+/**
+ * Set the output frequency you want for each PLL clock.
+ * PLL output frequencies are programmed by setting their N, M and P values.
+ * The governing equations are:
+ *     VCO = (Fi / m) * n, Fo = VCO / (2^p)
+ *     where Fo is the output frequency from the PLL.
+ * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
+ *     216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
+ * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
+ *
+ * @param n PLL feedback divider(DIVN)
+ * @param m PLL input divider(DIVN)
+ * @param p post divider(DIVP)
+ * @param cpcon base PLL charge pump(CPCON)
+ * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
+ *		be overridden), 1 if PLL is already correct
+ */
+int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
+{
+	u32 base_reg, misc_reg;
+	struct clk_pll *pll;
+	struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
+
+	pll = get_pll(clkid);
+
+	base_reg = readl(&pll->pll_base);
+
+	/* Set BYPASS, m, n and p to PLL_BASE */
+	base_reg &= ~(pllinfo->m_mask << pllinfo->m_shift);
+	base_reg |= m << pllinfo->m_shift;
+
+	base_reg &= ~(pllinfo->n_mask << pllinfo->n_shift);
+	base_reg |= n << pllinfo->n_shift;
+
+	base_reg &= ~(pllinfo->p_mask << pllinfo->p_shift);
+	base_reg |= p << pllinfo->p_shift;
+
+	if (clkid == CLOCK_ID_PERIPH) {
+		/*
+		 * If the PLL is already set up, check that it is correct
+		 * and record this info for clock_verify() to check.
+		 */
+		if (base_reg & PLL_BASE_OVRRIDE_MASK) {
+			base_reg |= PLL_ENABLE_MASK;
+			if (base_reg != readl(&pll->pll_base))
+				pllp_valid = 0;
+			return pllp_valid ? 1 : -1;
+		}
+		base_reg |= PLL_BASE_OVRRIDE_MASK;
+	}
+
+	base_reg |= PLL_BYPASS_MASK;
+	writel(base_reg, &pll->pll_base);
+
+	/* Set cpcon (KCP) to PLL_MISC */
+	misc_reg = readl(&pll->pll_misc);
+	misc_reg &= ~(pllinfo->kcp_mask << pllinfo->kcp_shift);
+	misc_reg |= cpcon << pllinfo->kcp_shift;
+	writel(misc_reg, &pll->pll_misc);
+
+	/* Enable PLL */
+	base_reg |= PLL_ENABLE_MASK;
+	writel(base_reg, &pll->pll_base);
+
+	/* Disable BYPASS */
+	base_reg &= ~PLL_BYPASS_MASK;
+	writel(base_reg, &pll->pll_base);
+
+	return 0;
+}
+
+void clock_ll_start_uart(enum periph_id periph_id)
+{
+	/* Assert UART reset and enable clock */
+	reset_set_enable(periph_id, 1);
+	clock_enable(periph_id);
+	clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
+
+	/* wait for 2us */
+	udelay(2);
+
+	/* De-assert reset to UART */
+	reset_set_enable(periph_id, 0);
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+int clock_decode_periph_id(struct udevice *dev)
+{
+	enum periph_id id;
+	u32 cell[2];
+	int err;
+
+	err = dev_read_u32_array(dev, "clocks", cell, ARRAY_SIZE(cell));
+	if (err)
+		return -1;
+	id = clk_id_to_periph_id(cell[1]);
+	assert(clock_periph_id_isvalid(id));
+	return id;
+}
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
+
+int clock_verify(void)
+{
+	struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
+	u32 reg = readl(&pll->pll_base);
+
+	if (!pllp_valid) {
+		printf("Warning: PLLP %x is not correct\n", reg);
+		return -1;
+	}
+	debug("PLLP %x is correct\n", reg);
+	return 0;
+}
+
+void clock_init(void)
+{
+	int i;
+
+	pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
+	pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
+	pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
+	pll_rate[CLOCK_ID_USB] = clock_get_rate(CLOCK_ID_USB);
+	pll_rate[CLOCK_ID_DISPLAY] = clock_get_rate(CLOCK_ID_DISPLAY);
+	pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
+	pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
+	pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
+	pll_rate[CLOCK_ID_CLK_M] = clock_get_rate(CLOCK_ID_CLK_M);
+
+	debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
+	debug("CLKM = %d\n", pll_rate[CLOCK_ID_CLK_M]);
+	debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
+	debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
+	debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
+	debug("PLLU = %d\n", pll_rate[CLOCK_ID_USB]);
+	debug("PLLD = %d\n", pll_rate[CLOCK_ID_DISPLAY]);
+	debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]);
+
+	for (i = 0; periph_clk_init_table[i].periph_id != -1; i++) {
+		enum periph_id periph_id;
+		enum clock_id parent;
+		int source, mux_bits, divider_bits;
+
+		periph_id = periph_clk_init_table[i].periph_id;
+		parent = periph_clk_init_table[i].parent_clock_id;
+
+		source = get_periph_clock_source(periph_id, parent, &mux_bits,
+						 &divider_bits);
+		clock_ll_set_source_bits(periph_id, mux_bits, source);
+	}
+}
+
+static void set_avp_clock_source(u32 src)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 val;
+
+	val = (src << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) |
+		(src << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) |
+		(src << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) |
+		(src << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) |
+		(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT);
+	writel(val, &clkrst->crc_sclk_brst_pol);
+	udelay(3);
+}
+
+/*
+ * This function is useful on Tegra30, and any later SoCs that have compatible
+ * PLLP configuration registers.
+ * NOTE: Not used on Tegra210 - see tegra210_setup_pllp in T210 clock.c
+ */
+void tegra30_set_up_pllp(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	/*
+	 * Based on the Tegra TRM, the system clock (which is the AVP clock) can
+	 * run up to 275MHz. On power on, the default sytem clock source is set
+	 * to PLLP_OUT0. This function sets PLLP's (hence PLLP_OUT0's) rate to
+	 * 408MHz which is beyond system clock's upper limit.
+	 *
+	 * The fix is to set the system clock to CLK_M before initializing PLLP,
+	 * and then switch back to PLLP_OUT4, which has an appropriate divider
+	 * configured, after PLLP has been configured
+	 */
+	set_avp_clock_source(SCLK_SOURCE_CLKM);
+
+	/*
+	 * PLLP output frequency set to 408Mhz
+	 * PLLC output frequency set to 228Mhz
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+
+	/* Set PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */
+
+	/* OUT1, 2 */
+	/* Assert RSTN before enable */
+	reg = PLLP_OUT2_RSTN_EN | PLLP_OUT1_RSTN_EN;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
+	/* Set divisor and reenable */
+	reg = (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO)
+		| PLLP_OUT2_OVR | PLLP_OUT2_CLKEN | PLLP_OUT2_RSTN_DIS
+		| (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO)
+		| PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
+
+	/* OUT3, 4 */
+	/* Assert RSTN before enable */
+	reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
+	/* Set divisor and reenable */
+	reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO)
+		| PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS
+		| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO)
+		| PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
+
+	set_avp_clock_source(SCLK_SOURCE_PLLP_OUT4);
+}
+
+int clock_external_output(int clk_id)
+{
+	u32 val;
+
+	if (clk_id >= 1 && clk_id <= 3) {
+		val = tegra_pmc_readl(offsetof(struct pmc_ctlr,
+				      pmc_clk_out_cntrl));
+		val |= 1 << (2 + (clk_id - 1) * 8);
+		tegra_pmc_writel(val,
+				 offsetof(struct pmc_ctlr,
+				 pmc_clk_out_cntrl));
+
+	} else {
+		printf("%s: Unknown output clock id %d\n", __func__, clk_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+__weak bool clock_early_init_done(void)
+{
+	return true;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/cmd_enterrcm.c b/roms/u-boot/arch/arm/mach-tegra/cmd_enterrcm.c
new file mode 100644
index 000000000..92ff6cb1b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/cmd_enterrcm.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2012-2019, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Derived from code (arch/arm/lib/reset.c) that is:
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * (C) Copyright 2004 Texas Insturments
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <irq_func.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/pmc.h>
+#include <linux/delay.h>
+
+static int do_enterrcm(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	puts("Entering RCM...\n");
+	udelay(50000);
+
+	tegra_pmc_writel(2, PMC_SCRATCH0);
+	disable_interrupts();
+	reset_cpu();
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	enterrcm, 1, 0, do_enterrcm,
+	"reset Tegra and enter USB Recovery Mode",
+	""
+);
diff --git a/roms/u-boot/arch/arm/mach-tegra/cpu.c b/roms/u-boot/arch/arm/mach-tegra/cpu.c
new file mode 100644
index 000000000..65b15b79f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/cpu.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2019, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/scu.h>
+#include <linux/delay.h>
+#include "cpu.h"
+
+int get_num_cpus(void)
+{
+	struct apb_misc_gp_ctlr *gp;
+	uint rev;
+	debug("%s entry\n", __func__);
+
+	gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
+	rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
+
+	switch (rev) {
+	case CHIPID_TEGRA20:
+		return 2;
+		break;
+	case CHIPID_TEGRA30:
+	case CHIPID_TEGRA114:
+	case CHIPID_TEGRA124:
+	case CHIPID_TEGRA210:
+	default:
+		return 4;
+		break;
+	}
+}
+
+/*
+ * Timing tables for each SOC for all four oscillator options.
+ */
+struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = {
+	/*
+	 * T20: 1 GHz
+	 *
+	 * Register   Field  Bits   Width
+	 * ------------------------------
+	 * PLLX_BASE  p      22:20    3
+	 * PLLX_BASE  n      17: 8   10
+	 * PLLX_BASE  m       4: 0    5
+	 * PLLX_MISC  cpcon  11: 8    4
+	 */
+	{
+		{ .n = 1000, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 13.0 MHz */
+		{ .n =  625, .m = 12, .p = 0, .cpcon =  8 }, /* OSC: 19.2 MHz */
+		{ .n = 1000, .m = 12, .p = 0, .cpcon = 12 }, /* OSC: 12.0 MHz */
+		{ .n = 1000, .m = 26, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* OSC: 38.4 MHz (N/A) */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* OSC: 48.0 MHz (N/A) */
+	},
+	/*
+	 * T25: 1.2 GHz
+	 *
+	 * Register   Field  Bits   Width
+	 * ------------------------------
+	 * PLLX_BASE  p      22:20    3
+	 * PLLX_BASE  n      17: 8   10
+	 * PLLX_BASE  m       4: 0    5
+	 * PLLX_MISC  cpcon  11: 8    4
+	 */
+	{
+		{ .n = 923, .m = 10, .p = 0, .cpcon = 12 }, /* OSC: 13.0 MHz */
+		{ .n = 750, .m = 12, .p = 0, .cpcon =  8 }, /* OSC: 19.2 MHz */
+		{ .n = 600, .m =  6, .p = 0, .cpcon = 12 }, /* OSC: 12.0 MHz */
+		{ .n = 600, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* OSC: 38.4 MHz (N/A) */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* OSC: 48.0 MHz (N/A) */
+	},
+	/*
+	 * T30: 600 MHz
+	 *
+	 * Register   Field  Bits   Width
+	 * ------------------------------
+	 * PLLX_BASE  p      22:20    3
+	 * PLLX_BASE  n      17: 8   10
+	 * PLLX_BASE  m       4: 0    5
+	 * PLLX_MISC  cpcon  11: 8    4
+	 */
+	{
+		{ .n = 600, .m = 13, .p = 0, .cpcon = 8 }, /* OSC: 13.0 MHz */
+		{ .n = 500, .m = 16, .p = 0, .cpcon = 8 }, /* OSC: 19.2 MHz */
+		{ .n = 600, .m = 12, .p = 0, .cpcon = 8 }, /* OSC: 12.0 MHz */
+		{ .n = 600, .m = 26, .p = 0, .cpcon = 8 }, /* OSC: 26.0 MHz */
+		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* OSC: 38.4 MHz (N/A) */
+		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* OSC: 48.0 MHz (N/A) */
+	},
+	/*
+	 * T114: 700 MHz
+	 *
+	 * Register   Field  Bits   Width
+	 * ------------------------------
+	 * PLLX_BASE  p      23:20    4
+	 * PLLX_BASE  n      15: 8    8
+	 * PLLX_BASE  m       7: 0    8
+	 */
+	{
+		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
+		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
+		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
+		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* OSC: 38.4 MHz (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* OSC: 48.0 MHz (N/A) */
+	},
+
+	/*
+	 * T124: 700 MHz
+	 *
+	 * Register   Field  Bits   Width
+	 * ------------------------------
+	 * PLLX_BASE  p      23:20    4
+	 * PLLX_BASE  n      15: 8    8
+	 * PLLX_BASE  m       7: 0    8
+	 */
+	{
+		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
+		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
+		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
+		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* OSC: 38.4 MHz (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* OSC: 48.0 MHz (N/A) */
+	},
+
+	/*
+	 * T210: 700 MHz
+	 *
+	 * Register   Field  Bits   Width
+	 * ------------------------------
+	 * PLLX_BASE  p      24:20    5
+	 * PLLX_BASE  n      15: 8    8
+	 * PLLX_BASE  m       7: 0    8
+	 */
+	{
+		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz = 702   MHz*/
+		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz = 700.8 MHz*/
+		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz = 696   MHz*/
+		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz = 702   MHz*/
+		{ .n =  36, .m = 1, .p = 1 }, /* OSC: 38.4 MHz = 691.2 MHz */
+		{ .n =  58, .m = 2, .p = 1 }, /* OSC: 48.0 MHz = 696   MHz */
+	},
+};
+
+static inline void pllx_set_iddq(void)
+{
+#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210)
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+	debug("%s entry\n", __func__);
+
+	/* Disable IDDQ */
+	reg = readl(&clkrst->crc_pllx_misc3);
+	reg &= ~PLLX_IDDQ_MASK;
+	writel(reg, &clkrst->crc_pllx_misc3);
+	udelay(2);
+	debug("%s: IDDQ: PLLX IDDQ = 0x%08X\n", __func__,
+	      readl(&clkrst->crc_pllx_misc3));
+#endif
+}
+
+int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm,
+		u32 divp, u32 cpcon)
+{
+	struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_XCPU];
+	int chip = tegra_get_chip();
+	u32 reg;
+	debug("%s entry\n", __func__);
+
+	/* If PLLX is already enabled, just return */
+	if (readl(&pll->pll_base) & PLL_ENABLE_MASK) {
+		debug("%s: PLLX already enabled, returning\n", __func__);
+		return 0;
+	}
+
+	pllx_set_iddq();
+
+	/* Set BYPASS, m, n and p to PLLX_BASE */
+	reg = PLL_BYPASS_MASK | (divm << pllinfo->m_shift);
+	reg |= (divn << pllinfo->n_shift) | (divp << pllinfo->p_shift);
+	writel(reg, &pll->pll_base);
+
+	/* Set cpcon to PLLX_MISC */
+	if (chip == CHIPID_TEGRA20 || chip == CHIPID_TEGRA30)
+		reg = (cpcon << pllinfo->kcp_shift);
+	else
+		reg = 0;
+
+	/*
+	 * TODO(twarren@nvidia.com) Check which SoCs use DCCON
+	 * and add to pllinfo table if needed!
+	 */
+	 /* Set dccon to PLLX_MISC if freq > 600MHz */
+	if (divn > 600)
+		reg |= (1 << PLL_DCCON_SHIFT);
+	writel(reg, &pll->pll_misc);
+
+	/* Disable BYPASS */
+	reg = readl(&pll->pll_base);
+	reg &= ~PLL_BYPASS_MASK;
+	writel(reg, &pll->pll_base);
+	debug("%s: base = 0x%08X\n", __func__, reg);
+
+	/* Set lock_enable to PLLX_MISC if lock_ena is valid (i.e. 0-31) */
+	reg = readl(&pll->pll_misc);
+	if (pllinfo->lock_ena < 32)
+		reg |= (1 << pllinfo->lock_ena);
+	writel(reg, &pll->pll_misc);
+	debug("%s: misc = 0x%08X\n", __func__, reg);
+
+	/* Enable PLLX last, once it's all configured */
+	reg = readl(&pll->pll_base);
+	reg |= PLL_ENABLE_MASK;
+	writel(reg, &pll->pll_base);
+	debug("%s: base final = 0x%08X\n", __func__, reg);
+
+	return 0;
+}
+
+void init_pllx(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct clk_pll_simple *pll = &clkrst->crc_pll_simple[SIMPLE_PLLX];
+	int soc_type, sku_info, chip_sku;
+	enum clock_osc_freq osc;
+	struct clk_pll_table *sel;
+	debug("%s entry\n", __func__);
+
+	/* get SOC (chip) type */
+	soc_type = tegra_get_chip();
+	debug("%s: SoC = 0x%02X\n", __func__, soc_type);
+
+	/* get SKU info */
+	sku_info = tegra_get_sku_info();
+	debug("%s: SKU info byte = 0x%02X\n", __func__, sku_info);
+
+	/* get chip SKU, combo of the above info */
+	chip_sku = tegra_get_chip_sku();
+	debug("%s: Chip SKU = %d\n", __func__, chip_sku);
+
+	/* get osc freq */
+	osc = clock_get_osc_freq();
+	debug("%s: osc = %d\n", __func__, osc);
+
+	/* set pllx */
+	sel = &tegra_pll_x_table[chip_sku][osc];
+	pllx_set_rate(pll, sel->n, sel->m, sel->p, sel->cpcon);
+}
+
+void enable_cpu_clock(int enable)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 clk;
+	debug("%s entry\n", __func__);
+
+	/*
+	 * NOTE:
+	 * Regardless of whether the request is to enable or disable the CPU
+	 * clock, every processor in the CPU complex except the master (CPU 0)
+	 * will have it's clock stopped because the AVP only talks to the
+	 * master.
+	 */
+
+	if (enable) {
+		/* Initialize PLLX */
+		init_pllx();
+
+		/* Wait until all clocks are stable */
+		udelay(PLL_STABILIZATION_DELAY);
+
+		writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+		writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
+	}
+
+	/*
+	 * Read the register containing the individual CPU clock enables and
+	 * always stop the clocks to CPUs > 0.
+	 */
+	clk = readl(&clkrst->crc_clk_cpu_cmplx);
+	clk |= 1 << CPU1_CLK_STP_SHIFT;
+	if (get_num_cpus() == 4)
+		clk |= (1 << CPU2_CLK_STP_SHIFT) + (1 << CPU3_CLK_STP_SHIFT);
+
+	/* Stop/Unstop the CPU clock */
+	clk &= ~CPU0_CLK_STP_MASK;
+	clk |= !enable << CPU0_CLK_STP_SHIFT;
+	writel(clk, &clkrst->crc_clk_cpu_cmplx);
+
+	clock_enable(PERIPH_ID_CPU);
+}
+
+static int is_cpu_powered(void)
+{
+	return (tegra_pmc_readl(offsetof(struct pmc_ctlr,
+				pmc_pwrgate_status)) & CPU_PWRED) ? 1 : 0;
+}
+
+static void remove_cpu_io_clamps(void)
+{
+	u32 reg;
+	debug("%s entry\n", __func__);
+
+	/* Remove the clamps on the CPU I/O signals */
+	reg = tegra_pmc_readl(offsetof(struct pmc_ctlr, pmc_remove_clamping));
+	reg |= CPU_CLMP;
+	tegra_pmc_writel(reg, offsetof(struct pmc_ctlr, pmc_remove_clamping));
+
+	/* Give I/O signals time to stabilize */
+	udelay(IO_STABILIZATION_DELAY);
+}
+
+void powerup_cpu(void)
+{
+	u32 reg;
+	int timeout = IO_STABILIZATION_DELAY;
+	debug("%s entry\n", __func__);
+
+	if (!is_cpu_powered()) {
+		/* Toggle the CPU power state (OFF -> ON) */
+		reg = tegra_pmc_readl(offsetof(struct pmc_ctlr,
+				      pmc_pwrgate_toggle));
+		reg &= PARTID_CP;
+		reg |= START_CP;
+		tegra_pmc_writel(reg,
+				 offsetof(struct pmc_ctlr,
+				 pmc_pwrgate_toggle));
+
+		/* Wait for the power to come up */
+		while (!is_cpu_powered()) {
+			if (timeout-- == 0)
+				printf("CPU failed to power up!\n");
+			else
+				udelay(10);
+		}
+
+		/*
+		 * Remove the I/O clamps from CPU power partition.
+		 * Recommended only on a Warm boot, if the CPU partition gets
+		 * power gated. Shouldn't cause any harm when called after a
+		 * cold boot according to HW, probably just redundant.
+		 */
+		remove_cpu_io_clamps();
+	}
+}
+
+void reset_A9_cpu(int reset)
+{
+	/*
+	* NOTE:  Regardless of whether the request is to hold the CPU in reset
+	*        or take it out of reset, every processor in the CPU complex
+	*        except the master (CPU 0) will be held in reset because the
+	*        AVP only talks to the master. The AVP does not know that there
+	*        are multiple processors in the CPU complex.
+	*/
+	int mask = crc_rst_cpu | crc_rst_de | crc_rst_debug;
+	int num_cpus = get_num_cpus();
+	int cpu;
+
+	debug("%s entry\n", __func__);
+	/* Hold CPUs 1 onwards in reset, and CPU 0 if asked */
+	for (cpu = 1; cpu < num_cpus; cpu++)
+		reset_cmplx_set_enable(cpu, mask, 1);
+	reset_cmplx_set_enable(0, mask, reset);
+
+	/* Enable/Disable master CPU reset */
+	reset_set_enable(PERIPH_ID_CPU, reset);
+}
+
+void clock_enable_coresight(int enable)
+{
+	u32 rst, src = 2;
+
+	debug("%s entry\n", __func__);
+	clock_set_enable(PERIPH_ID_CORESIGHT, enable);
+	reset_set_enable(PERIPH_ID_CORESIGHT, !enable);
+
+	if (enable) {
+		/*
+		 * Put CoreSight on PLLP_OUT0 and divide it down as per
+		 * PLLP base frequency based on SoC type (T20/T30+).
+		 * Clock divider request would setup CSITE clock as 144MHz
+		 * for PLLP base 216MHz and 204MHz for PLLP base 408MHz
+		 */
+		src = CLK_DIVIDER(NVBL_PLLP_KHZ, CSITE_KHZ);
+		clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src);
+
+		/* Unlock the CPU CoreSight interfaces */
+		rst = CORESIGHT_UNLOCK;
+		writel(rst, CSITE_CPU_DBG0_LAR);
+		writel(rst, CSITE_CPU_DBG1_LAR);
+		if (get_num_cpus() == 4) {
+			writel(rst, CSITE_CPU_DBG2_LAR);
+			writel(rst, CSITE_CPU_DBG3_LAR);
+		}
+	}
+}
+
+void halt_avp(void)
+{
+	debug("%s entry\n", __func__);
+
+	for (;;) {
+		writel(HALT_COP_EVENT_JTAG | (FLOW_MODE_STOP << 29),
+		       FLOW_CTLR_HALT_COP_EVENTS);
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/cpu.h b/roms/u-boot/arch/arm/mach-tegra/cpu.h
new file mode 100644
index 000000000..d54182544
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/cpu.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+#include <asm/types.h>
+
+/* Stabilization delays, in usec */
+#define PLL_STABILIZATION_DELAY (300)
+#define IO_STABILIZATION_DELAY	(1000)
+
+#if defined(CONFIG_TEGRA20)
+#define NVBL_PLLP_KHZ	216000
+#define CSITE_KHZ	144000
+#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) || \
+	defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210)
+#define NVBL_PLLP_KHZ	408000
+#define CSITE_KHZ	136000
+#else
+#error "Unknown Tegra chip!"
+#endif
+
+#define PLLX_ENABLED		(1 << 30)
+#define CCLK_BURST_POLICY	0x20008888
+#define SUPER_CCLK_DIVIDER	0x80000000
+
+/* Calculate clock fractional divider value from ref and target frequencies */
+#define CLK_DIVIDER(REF, FREQ)  ((((REF) * 2) / FREQ) - 2)
+
+/* Calculate clock frequency value from reference and clock divider value */
+#define CLK_FREQUENCY(REF, REG)  (((REF) * 2) / (REG + 2))
+
+/* AVP/CPU ID */
+#define PG_UP_TAG_0_PID_CPU	0x55555555	/* CPU aka "a9" aka "mpcore" */
+#define PG_UP_TAG_0             0x0
+
+#define CORESIGHT_UNLOCK	0xC5ACCE55
+
+#define EXCEP_VECTOR_CPU_RESET_VECTOR	(NV_PA_EVP_BASE + 0x100)
+#define CSITE_CPU_DBG0_LAR		(NV_PA_CSITE_BASE + 0x10FB0)
+#define CSITE_CPU_DBG1_LAR		(NV_PA_CSITE_BASE + 0x12FB0)
+#define CSITE_CPU_DBG2_LAR		(NV_PA_CSITE_BASE + 0x14FB0)
+#define CSITE_CPU_DBG3_LAR		(NV_PA_CSITE_BASE + 0x16FB0)
+
+#define FLOW_CTLR_HALT_COP_EVENTS	(NV_PA_FLOW_BASE + 4)
+#define FLOW_MODE_STOP			2
+#define HALT_COP_EVENT_JTAG		(1 << 28)
+#define HALT_COP_EVENT_IRQ_1		(1 << 11)
+#define HALT_COP_EVENT_FIQ_1		(1 << 9)
+
+#define FLOW_MODE_NONE		0
+
+#define SIMPLE_PLLX     (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE)
+
+/* SB_AA64_RESET_LOW and _HIGH defines for CPU reset vector */
+#define SB_AA64_RESET_LOW	0x6000C230
+#define SB_AA64_RESET_HIGH	0x6000C234
+
+struct clk_pll_table {
+	u16	n;
+	u16	m;
+	u8	p;
+	u8	cpcon;
+};
+
+void clock_enable_coresight(int enable);
+void enable_cpu_clock(int enable);
+void halt_avp(void)  __attribute__ ((noreturn));
+void init_pllx(void);
+void powerup_cpu(void);
+void reset_A9_cpu(int reset);
+void start_cpu(u32 reset_vector);
+int tegra_get_chip(void);
+int tegra_get_sku_info(void);
+int tegra_get_chip_sku(void);
+void adjust_pllp_out_freqs(void);
+void pmic_enable_cpu_vdd(void);
diff --git a/roms/u-boot/arch/arm/mach-tegra/dt-setup.c b/roms/u-boot/arch/arm/mach-tegra/dt-setup.c
new file mode 100644
index 000000000..602b20e6b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/dt-setup.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2010-2016, NVIDIA CORPORATION.
+ */
+
+#include <common.h>
+#include <asm/arch-tegra/gpu.h>
+
+/*
+ * This function is called right before the kernel is booted. "blob" is the
+ * device tree that will be passed to the kernel.
+ */
+int ft_system_setup(void *blob, struct bd_info *bd)
+{
+	const char *gpu_compats[] = {
+#if defined(CONFIG_TEGRA124)
+		"nvidia,gk20a",
+#endif
+#if defined(CONFIG_TEGRA210)
+		"nvidia,gm20b",
+#endif
+	};
+	int i, ret;
+
+	/* Enable GPU node if GPU setup has been performed */
+	for (i = 0; i < ARRAY_SIZE(gpu_compats); i++) {
+		ret = tegra_gpu_enable_node(blob, gpu_compats[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/emc.c b/roms/u-boot/arch/arm/mach-tegra/emc.c
new file mode 100644
index 000000000..2eea14b5a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/emc.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+#include <common.h>
+#include <asm/global_data.h>
+#include "emc.h"
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/emc.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmu.h>
+#include <asm/arch-tegra/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* These rates are hard-coded for now, until fdt provides them */
+#define EMC_SDRAM_RATE_T20	(333000 * 2 * 1000)
+#define EMC_SDRAM_RATE_T25	(380000 * 2 * 1000)
+
+int board_emc_init(void)
+{
+	unsigned rate;
+
+	switch (tegra_get_chip_sku()) {
+	default:
+	case TEGRA_SOC_T20:
+		rate  = EMC_SDRAM_RATE_T20;
+		break;
+	case TEGRA_SOC_T25:
+		rate  = EMC_SDRAM_RATE_T25;
+		break;
+	}
+	return tegra_set_emc(gd->fdt_blob, rate);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/emc.h b/roms/u-boot/arch/arm/mach-tegra/emc.h
new file mode 100644
index 000000000..7cc8e2d56
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/emc.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _NVIDIA_EMC_H_
+#define _NVIDIA_EMC_H_
+
+int board_emc_init(void);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/gpu.c b/roms/u-boot/arch/arm/mach-tegra/gpu.c
new file mode 100644
index 000000000..13ffade04
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/gpu.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2015, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra vpr routines */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/mc.h>
+#include <asm/arch-tegra/ap.h>
+
+#include <fdt_support.h>
+
+static bool _configured;
+
+void tegra_gpu_config(void)
+{
+	struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE;
+
+#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
+	if (!tegra_cpu_is_non_secure())
+#endif
+	{
+		/* Turn VPR off */
+		writel(0, &mc->mc_video_protect_size_mb);
+		writel(TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_DISABLED,
+		       &mc->mc_video_protect_reg_ctrl);
+		/* read back to ensure the write went through */
+		readl(&mc->mc_video_protect_reg_ctrl);
+	}
+
+	debug("configured VPR\n");
+
+	_configured = true;
+}
+
+#if defined(CONFIG_OF_LIBFDT)
+
+int tegra_gpu_enable_node(void *blob, const char *compat)
+{
+	int offset;
+
+	if (!_configured)
+		return 0;
+
+	offset = fdt_node_offset_by_compatible(blob, -1, compat);
+	while (offset != -FDT_ERR_NOTFOUND) {
+		fdt_status_okay(blob, offset);
+		offset = fdt_node_offset_by_compatible(blob, offset, compat);
+	}
+
+	return 0;
+}
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/ivc.c b/roms/u-boot/arch/arm/mach-tegra/ivc.c
new file mode 100644
index 000000000..b69a458fd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/ivc.c
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/io.h>
+#include <asm/arch-tegra/ivc.h>
+#include <linux/bug.h>
+
+#define TEGRA_IVC_ALIGN 64
+
+/*
+ * IVC channel reset protocol.
+ *
+ * Each end uses its tx_channel.state to indicate its synchronization state.
+ */
+enum ivc_state {
+	/*
+	 * This value is zero for backwards compatibility with services that
+	 * assume channels to be initially zeroed. Such channels are in an
+	 * initially valid state, but cannot be asynchronously reset, and must
+	 * maintain a valid state at all times.
+	 *
+	 * The transmitting end can enter the established state from the sync or
+	 * ack state when it observes the receiving endpoint in the ack or
+	 * established state, indicating that has cleared the counters in our
+	 * rx_channel.
+	 */
+	ivc_state_established = 0,
+
+	/*
+	 * If an endpoint is observed in the sync state, the remote endpoint is
+	 * allowed to clear the counters it owns asynchronously with respect to
+	 * the current endpoint. Therefore, the current endpoint is no longer
+	 * allowed to communicate.
+	 */
+	ivc_state_sync,
+
+	/*
+	 * When the transmitting end observes the receiving end in the sync
+	 * state, it can clear the w_count and r_count and transition to the ack
+	 * state. If the remote endpoint observes us in the ack state, it can
+	 * return to the established state once it has cleared its counters.
+	 */
+	ivc_state_ack
+};
+
+/*
+ * This structure is divided into two-cache aligned parts, the first is only
+ * written through the tx_channel pointer, while the second is only written
+ * through the rx_channel pointer. This delineates ownership of the cache lines,
+ * which is critical to performance and necessary in non-cache coherent
+ * implementations.
+ */
+struct tegra_ivc_channel_header {
+	union {
+		/* fields owned by the transmitting end */
+		struct {
+			uint32_t w_count;
+			uint32_t state;
+		};
+		uint8_t w_align[TEGRA_IVC_ALIGN];
+	};
+	union {
+		/* fields owned by the receiving end */
+		uint32_t r_count;
+		uint8_t r_align[TEGRA_IVC_ALIGN];
+	};
+};
+
+static inline void tegra_ivc_invalidate_counter(struct tegra_ivc *ivc,
+					struct tegra_ivc_channel_header *h,
+					ulong offset)
+{
+	ulong base = ((ulong)h) + offset;
+	invalidate_dcache_range(base, base + TEGRA_IVC_ALIGN);
+}
+
+static inline void tegra_ivc_flush_counter(struct tegra_ivc *ivc,
+					   struct tegra_ivc_channel_header *h,
+					   ulong offset)
+{
+	ulong base = ((ulong)h) + offset;
+	flush_dcache_range(base, base + TEGRA_IVC_ALIGN);
+}
+
+static inline ulong tegra_ivc_frame_addr(struct tegra_ivc *ivc,
+					 struct tegra_ivc_channel_header *h,
+					 uint32_t frame)
+{
+	BUG_ON(frame >= ivc->nframes);
+
+	return ((ulong)h) + sizeof(struct tegra_ivc_channel_header) +
+	       (ivc->frame_size * frame);
+}
+
+static inline void *tegra_ivc_frame_pointer(struct tegra_ivc *ivc,
+					    struct tegra_ivc_channel_header *ch,
+					    uint32_t frame)
+{
+	return (void *)tegra_ivc_frame_addr(ivc, ch, frame);
+}
+
+static inline void tegra_ivc_invalidate_frame(struct tegra_ivc *ivc,
+					struct tegra_ivc_channel_header *h,
+					unsigned frame)
+{
+	ulong base = tegra_ivc_frame_addr(ivc, h, frame);
+	invalidate_dcache_range(base, base + ivc->frame_size);
+}
+
+static inline void tegra_ivc_flush_frame(struct tegra_ivc *ivc,
+					 struct tegra_ivc_channel_header *h,
+					 unsigned frame)
+{
+	ulong base = tegra_ivc_frame_addr(ivc, h, frame);
+	flush_dcache_range(base, base + ivc->frame_size);
+}
+
+static inline int tegra_ivc_channel_empty(struct tegra_ivc *ivc,
+					  struct tegra_ivc_channel_header *ch)
+{
+	/*
+	 * This function performs multiple checks on the same values with
+	 * security implications, so create snapshots with READ_ONCE() to
+	 * ensure that these checks use the same values.
+	 */
+	uint32_t w_count = READ_ONCE(ch->w_count);
+	uint32_t r_count = READ_ONCE(ch->r_count);
+
+	/*
+	 * Perform an over-full check to prevent denial of service attacks where
+	 * a server could be easily fooled into believing that there's an
+	 * extremely large number of frames ready, since receivers are not
+	 * expected to check for full or over-full conditions.
+	 *
+	 * Although the channel isn't empty, this is an invalid case caused by
+	 * a potentially malicious peer, so returning empty is safer, because it
+	 * gives the impression that the channel has gone silent.
+	 */
+	if (w_count - r_count > ivc->nframes)
+		return 1;
+
+	return w_count == r_count;
+}
+
+static inline int tegra_ivc_channel_full(struct tegra_ivc *ivc,
+					 struct tegra_ivc_channel_header *ch)
+{
+	/*
+	 * Invalid cases where the counters indicate that the queue is over
+	 * capacity also appear full.
+	 */
+	return (READ_ONCE(ch->w_count) - READ_ONCE(ch->r_count)) >=
+	       ivc->nframes;
+}
+
+static inline void tegra_ivc_advance_rx(struct tegra_ivc *ivc)
+{
+	WRITE_ONCE(ivc->rx_channel->r_count,
+		   READ_ONCE(ivc->rx_channel->r_count) + 1);
+
+	if (ivc->r_pos == ivc->nframes - 1)
+		ivc->r_pos = 0;
+	else
+		ivc->r_pos++;
+}
+
+static inline void tegra_ivc_advance_tx(struct tegra_ivc *ivc)
+{
+	WRITE_ONCE(ivc->tx_channel->w_count,
+		   READ_ONCE(ivc->tx_channel->w_count) + 1);
+
+	if (ivc->w_pos == ivc->nframes - 1)
+		ivc->w_pos = 0;
+	else
+		ivc->w_pos++;
+}
+
+static inline int tegra_ivc_check_read(struct tegra_ivc *ivc)
+{
+	ulong offset;
+
+	/*
+	 * tx_channel->state is set locally, so it is not synchronized with
+	 * state from the remote peer. The remote peer cannot reset its
+	 * transmit counters until we've acknowledged its synchronization
+	 * request, so no additional synchronization is required because an
+	 * asynchronous transition of rx_channel->state to ivc_state_ack is not
+	 * allowed.
+	 */
+	if (ivc->tx_channel->state != ivc_state_established)
+		return -ECONNRESET;
+
+	/*
+	 * Avoid unnecessary invalidations when performing repeated accesses to
+	 * an IVC channel by checking the old queue pointers first.
+	 * Synchronization is only necessary when these pointers indicate empty
+	 * or full.
+	 */
+	if (!tegra_ivc_channel_empty(ivc, ivc->rx_channel))
+		return 0;
+
+	offset = offsetof(struct tegra_ivc_channel_header, w_count);
+	tegra_ivc_invalidate_counter(ivc, ivc->rx_channel, offset);
+	return tegra_ivc_channel_empty(ivc, ivc->rx_channel) ? -ENOMEM : 0;
+}
+
+static inline int tegra_ivc_check_write(struct tegra_ivc *ivc)
+{
+	ulong offset;
+
+	if (ivc->tx_channel->state != ivc_state_established)
+		return -ECONNRESET;
+
+	if (!tegra_ivc_channel_full(ivc, ivc->tx_channel))
+		return 0;
+
+	offset = offsetof(struct tegra_ivc_channel_header, r_count);
+	tegra_ivc_invalidate_counter(ivc, ivc->tx_channel, offset);
+	return tegra_ivc_channel_full(ivc, ivc->tx_channel) ? -ENOMEM : 0;
+}
+
+static inline uint32_t tegra_ivc_channel_avail_count(struct tegra_ivc *ivc,
+	struct tegra_ivc_channel_header *ch)
+{
+	/*
+	 * This function isn't expected to be used in scenarios where an
+	 * over-full situation can lead to denial of service attacks. See the
+	 * comment in tegra_ivc_channel_empty() for an explanation about
+	 * special over-full considerations.
+	 */
+	return READ_ONCE(ch->w_count) - READ_ONCE(ch->r_count);
+}
+
+int tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc, void **frame)
+{
+	int result = tegra_ivc_check_read(ivc);
+	if (result < 0)
+		return result;
+
+	/*
+	 * Order observation of w_pos potentially indicating new data before
+	 * data read.
+	 */
+	mb();
+
+	tegra_ivc_invalidate_frame(ivc, ivc->rx_channel, ivc->r_pos);
+	*frame = tegra_ivc_frame_pointer(ivc, ivc->rx_channel, ivc->r_pos);
+
+	return 0;
+}
+
+int tegra_ivc_read_advance(struct tegra_ivc *ivc)
+{
+	ulong offset;
+	int result;
+
+	/*
+	 * No read barriers or synchronization here: the caller is expected to
+	 * have already observed the channel non-empty. This check is just to
+	 * catch programming errors.
+	 */
+	result = tegra_ivc_check_read(ivc);
+	if (result)
+		return result;
+
+	tegra_ivc_advance_rx(ivc);
+	offset = offsetof(struct tegra_ivc_channel_header, r_count);
+	tegra_ivc_flush_counter(ivc, ivc->rx_channel, offset);
+
+	/*
+	 * Ensure our write to r_pos occurs before our read from w_pos.
+	 */
+	mb();
+
+	offset = offsetof(struct tegra_ivc_channel_header, w_count);
+	tegra_ivc_invalidate_counter(ivc, ivc->rx_channel, offset);
+
+	if (tegra_ivc_channel_avail_count(ivc, ivc->rx_channel) ==
+	    ivc->nframes - 1)
+		ivc->notify(ivc);
+
+	return 0;
+}
+
+int tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc, void **frame)
+{
+	int result = tegra_ivc_check_write(ivc);
+	if (result)
+		return result;
+
+	*frame = tegra_ivc_frame_pointer(ivc, ivc->tx_channel, ivc->w_pos);
+
+	return 0;
+}
+
+int tegra_ivc_write_advance(struct tegra_ivc *ivc)
+{
+	ulong offset;
+	int result;
+
+	result = tegra_ivc_check_write(ivc);
+	if (result)
+		return result;
+
+	tegra_ivc_flush_frame(ivc, ivc->tx_channel, ivc->w_pos);
+
+	/*
+	 * Order any possible stores to the frame before update of w_pos.
+	 */
+	mb();
+
+	tegra_ivc_advance_tx(ivc);
+	offset = offsetof(struct tegra_ivc_channel_header, w_count);
+	tegra_ivc_flush_counter(ivc, ivc->tx_channel, offset);
+
+	/*
+	 * Ensure our write to w_pos occurs before our read from r_pos.
+	 */
+	mb();
+
+	offset = offsetof(struct tegra_ivc_channel_header, r_count);
+	tegra_ivc_invalidate_counter(ivc, ivc->tx_channel, offset);
+
+	if (tegra_ivc_channel_avail_count(ivc, ivc->tx_channel) == 1)
+		ivc->notify(ivc);
+
+	return 0;
+}
+
+/*
+ * ===============================================================
+ *  IVC State Transition Table - see tegra_ivc_channel_notified()
+ * ===============================================================
+ *
+ *	local	remote	action
+ *	-----	------	-----------------------------------
+ *	SYNC	EST	<none>
+ *	SYNC	ACK	reset counters; move to EST; notify
+ *	SYNC	SYNC	reset counters; move to ACK; notify
+ *	ACK	EST	move to EST; notify
+ *	ACK	ACK	move to EST; notify
+ *	ACK	SYNC	reset counters; move to ACK; notify
+ *	EST	EST	<none>
+ *	EST	ACK	<none>
+ *	EST	SYNC	reset counters; move to ACK; notify
+ *
+ * ===============================================================
+ */
+int tegra_ivc_channel_notified(struct tegra_ivc *ivc)
+{
+	ulong offset;
+	enum ivc_state peer_state;
+
+	/* Copy the receiver's state out of shared memory. */
+	offset = offsetof(struct tegra_ivc_channel_header, w_count);
+	tegra_ivc_invalidate_counter(ivc, ivc->rx_channel, offset);
+	peer_state = READ_ONCE(ivc->rx_channel->state);
+
+	if (peer_state == ivc_state_sync) {
+		/*
+		 * Order observation of ivc_state_sync before stores clearing
+		 * tx_channel.
+		 */
+		mb();
+
+		/*
+		 * Reset tx_channel counters. The remote end is in the SYNC
+		 * state and won't make progress until we change our state,
+		 * so the counters are not in use at this time.
+		 */
+		ivc->tx_channel->w_count = 0;
+		ivc->rx_channel->r_count = 0;
+
+		ivc->w_pos = 0;
+		ivc->r_pos = 0;
+
+		/*
+		 * Ensure that counters appear cleared before new state can be
+		 * observed.
+		 */
+		mb();
+
+		/*
+		 * Move to ACK state. We have just cleared our counters, so it
+		 * is now safe for the remote end to start using these values.
+		 */
+		ivc->tx_channel->state = ivc_state_ack;
+		offset = offsetof(struct tegra_ivc_channel_header, w_count);
+		tegra_ivc_flush_counter(ivc, ivc->tx_channel, offset);
+
+		/*
+		 * Notify remote end to observe state transition.
+		 */
+		ivc->notify(ivc);
+	} else if (ivc->tx_channel->state == ivc_state_sync &&
+			peer_state == ivc_state_ack) {
+		/*
+		 * Order observation of ivc_state_sync before stores clearing
+		 * tx_channel.
+		 */
+		mb();
+
+		/*
+		 * Reset tx_channel counters. The remote end is in the ACK
+		 * state and won't make progress until we change our state,
+		 * so the counters are not in use at this time.
+		 */
+		ivc->tx_channel->w_count = 0;
+		ivc->rx_channel->r_count = 0;
+
+		ivc->w_pos = 0;
+		ivc->r_pos = 0;
+
+		/*
+		 * Ensure that counters appear cleared before new state can be
+		 * observed.
+		 */
+		mb();
+
+		/*
+		 * Move to ESTABLISHED state. We know that the remote end has
+		 * already cleared its counters, so it is safe to start
+		 * writing/reading on this channel.
+		 */
+		ivc->tx_channel->state = ivc_state_established;
+		offset = offsetof(struct tegra_ivc_channel_header, w_count);
+		tegra_ivc_flush_counter(ivc, ivc->tx_channel, offset);
+
+		/*
+		 * Notify remote end to observe state transition.
+		 */
+		ivc->notify(ivc);
+	} else if (ivc->tx_channel->state == ivc_state_ack) {
+		/*
+		 * At this point, we have observed the peer to be in either
+		 * the ACK or ESTABLISHED state. Next, order observation of
+		 * peer state before storing to tx_channel.
+		 */
+		mb();
+
+		/*
+		 * Move to ESTABLISHED state. We know that we have previously
+		 * cleared our counters, and we know that the remote end has
+		 * cleared its counters, so it is safe to start writing/reading
+		 * on this channel.
+		 */
+		ivc->tx_channel->state = ivc_state_established;
+		offset = offsetof(struct tegra_ivc_channel_header, w_count);
+		tegra_ivc_flush_counter(ivc, ivc->tx_channel, offset);
+
+		/*
+		 * Notify remote end to observe state transition.
+		 */
+		ivc->notify(ivc);
+	} else {
+		/*
+		 * There is no need to handle any further action. Either the
+		 * channel is already fully established, or we are waiting for
+		 * the remote end to catch up with our current state. Refer
+		 * to the diagram in "IVC State Transition Table" above.
+		 */
+	}
+
+	if (ivc->tx_channel->state != ivc_state_established)
+		return -EAGAIN;
+
+	return 0;
+}
+
+void tegra_ivc_channel_reset(struct tegra_ivc *ivc)
+{
+	ulong offset;
+
+	ivc->tx_channel->state = ivc_state_sync;
+	offset = offsetof(struct tegra_ivc_channel_header, w_count);
+	tegra_ivc_flush_counter(ivc, ivc->tx_channel, offset);
+	ivc->notify(ivc);
+}
+
+static int check_ivc_params(ulong qbase1, ulong qbase2, uint32_t nframes,
+			    uint32_t frame_size)
+{
+	int ret = 0;
+
+	BUG_ON(offsetof(struct tegra_ivc_channel_header, w_count) &
+	       (TEGRA_IVC_ALIGN - 1));
+	BUG_ON(offsetof(struct tegra_ivc_channel_header, r_count) &
+	       (TEGRA_IVC_ALIGN - 1));
+	BUG_ON(sizeof(struct tegra_ivc_channel_header) &
+	       (TEGRA_IVC_ALIGN - 1));
+
+	if ((uint64_t)nframes * (uint64_t)frame_size >= 0x100000000) {
+		pr_err("tegra_ivc: nframes * frame_size overflows\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * The headers must at least be aligned enough for counters
+	 * to be accessed atomically.
+	 */
+	if ((qbase1 & (TEGRA_IVC_ALIGN - 1)) ||
+	    (qbase2 & (TEGRA_IVC_ALIGN - 1))) {
+		pr_err("tegra_ivc: channel start not aligned\n");
+		return -EINVAL;
+	}
+
+	if (frame_size & (TEGRA_IVC_ALIGN - 1)) {
+		pr_err("tegra_ivc: frame size not adequately aligned\n");
+		return -EINVAL;
+	}
+
+	if (qbase1 < qbase2) {
+		if (qbase1 + frame_size * nframes > qbase2)
+			ret = -EINVAL;
+	} else {
+		if (qbase2 + frame_size * nframes > qbase1)
+			ret = -EINVAL;
+	}
+
+	if (ret) {
+		pr_err("tegra_ivc: queue regions overlap\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int tegra_ivc_init(struct tegra_ivc *ivc, ulong rx_base, ulong tx_base,
+		   uint32_t nframes, uint32_t frame_size,
+		   void (*notify)(struct tegra_ivc *))
+{
+	int ret;
+
+	if (!ivc)
+		return -EINVAL;
+
+	ret = check_ivc_params(rx_base, tx_base, nframes, frame_size);
+	if (ret)
+		return ret;
+
+	ivc->rx_channel = (struct tegra_ivc_channel_header *)rx_base;
+	ivc->tx_channel = (struct tegra_ivc_channel_header *)tx_base;
+	ivc->w_pos = 0;
+	ivc->r_pos = 0;
+	ivc->nframes = nframes;
+	ivc->frame_size = frame_size;
+	ivc->notify = notify;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/pinmux-common.c b/roms/u-boot/arch/arm/mach-tegra/pinmux-common.c
new file mode 100644
index 000000000..16b03bfe7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/pinmux-common.c
@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+
+/* return 1 if a pingrp is in range */
+#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PMUX_PINGRP_COUNT))
+
+/* return 1 if a pmux_func is in range */
+#define pmux_func_isvalid(func) \
+	(((func) >= 0) && ((func) < PMUX_FUNC_COUNT))
+
+/* return 1 if a pin_pupd_is in range */
+#define pmux_pin_pupd_isvalid(pupd) \
+	(((pupd) >= PMUX_PULL_NORMAL) && ((pupd) <= PMUX_PULL_UP))
+
+/* return 1 if a pin_tristate_is in range */
+#define pmux_pin_tristate_isvalid(tristate) \
+	(((tristate) >= PMUX_TRI_NORMAL) && ((tristate) <= PMUX_TRI_TRISTATE))
+
+#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
+/* return 1 if a pin_io_is in range */
+#define pmux_pin_io_isvalid(io) \
+	(((io) >= PMUX_PIN_OUTPUT) && ((io) <= PMUX_PIN_INPUT))
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_LOCK
+/* return 1 if a pin_lock is in range */
+#define pmux_pin_lock_isvalid(lock) \
+	(((lock) >= PMUX_PIN_LOCK_DISABLE) && ((lock) <= PMUX_PIN_LOCK_ENABLE))
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_OD
+/* return 1 if a pin_od is in range */
+#define pmux_pin_od_isvalid(od) \
+	(((od) >= PMUX_PIN_OD_DISABLE) && ((od) <= PMUX_PIN_OD_ENABLE))
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET
+/* return 1 if a pin_ioreset_is in range */
+#define pmux_pin_ioreset_isvalid(ioreset) \
+	(((ioreset) >= PMUX_PIN_IO_RESET_DISABLE) && \
+	 ((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL
+/* return 1 if a pin_rcv_sel_is in range */
+#define pmux_pin_rcv_sel_isvalid(rcv_sel) \
+	(((rcv_sel) >= PMUX_PIN_RCV_SEL_NORMAL) && \
+	 ((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH))
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV
+/* return 1 if a pin_e_io_hv is in range */
+#define pmux_pin_e_io_hv_isvalid(e_io_hv) \
+	(((e_io_hv) >= PMUX_PIN_E_IO_HV_NORMAL) && \
+	 ((e_io_hv) <= PMUX_PIN_E_IO_HV_HIGH))
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+#define pmux_lpmd_isvalid(lpm) \
+	(((lpm) >= PMUX_LPMD_X8) && ((lpm) <= PMUX_LPMD_X))
+#endif
+
+#if defined(TEGRA_PMX_PINS_HAVE_SCHMT) || defined(TEGRA_PMX_GRPS_HAVE_SCHMT)
+#define pmux_schmt_isvalid(schmt) \
+	(((schmt) >= PMUX_SCHMT_DISABLE) && ((schmt) <= PMUX_SCHMT_ENABLE))
+#endif
+
+#if defined(TEGRA_PMX_PINS_HAVE_HSM) || defined(TEGRA_PMX_GRPS_HAVE_HSM)
+#define pmux_hsm_isvalid(hsm) \
+	(((hsm) >= PMUX_HSM_DISABLE) && ((hsm) <= PMUX_HSM_ENABLE))
+#endif
+
+#define _R(offset)	(u32 *)((unsigned long)NV_PA_APB_MISC_BASE + (offset))
+
+#if defined(CONFIG_TEGRA20)
+
+#define MUX_REG(grp)	_R(0x80 + ((tegra_soc_pingroups[grp].ctl_id / 16) * 4))
+#define MUX_SHIFT(grp)	((tegra_soc_pingroups[grp].ctl_id % 16) * 2)
+
+#define PULL_REG(grp)	_R(0xa0 + ((tegra_soc_pingroups[grp].pull_id / 16) * 4))
+#define PULL_SHIFT(grp)	((tegra_soc_pingroups[grp].pull_id % 16) * 2)
+
+#define TRI_REG(grp)	_R(0x14 + (((grp) / 32) * 4))
+#define TRI_SHIFT(grp)	((grp) % 32)
+
+#else
+
+#define REG(pin)	_R(0x3000 + ((pin) * 4))
+
+#define MUX_REG(pin)	REG(pin)
+#define MUX_SHIFT(pin)	0
+
+#define PULL_REG(pin)	REG(pin)
+#define PULL_SHIFT(pin)	2
+
+#define TRI_REG(pin)	REG(pin)
+#define TRI_SHIFT(pin)	4
+
+#endif /* CONFIG_TEGRA20 */
+
+#define DRV_REG(group)	_R(TEGRA_PMX_SOC_DRV_GROUP_BASE_REG + ((group) * 4))
+
+#define MIPIPADCTRL_REG(group)	_R(TEGRA_PMX_SOC_MIPIPADCTRL_BASE_REG + ((group) * 4))
+
+/*
+ * We could force arch-tegraNN/pinmux.h to define all of these. However,
+ * that's a lot of defines, and for now it's manageable to just put a
+ * special case here. It's possible this decision will change with future
+ * SoCs.
+ */
+#ifdef CONFIG_TEGRA210
+#define IO_SHIFT	6
+#define LOCK_SHIFT	7
+#ifdef TEGRA_PMX_PINS_HAVE_HSM
+#define HSM_SHIFT	9
+#endif
+#define E_IO_HV_SHIFT	10
+#define OD_SHIFT	11
+#ifdef TEGRA_PMX_PINS_HAVE_SCHMT
+#define SCHMT_SHIFT	12
+#endif
+#else
+#define IO_SHIFT	5
+#define OD_SHIFT	6
+#define LOCK_SHIFT	7
+#define IO_RESET_SHIFT	8
+#define RCV_SEL_SHIFT	9
+#endif
+
+#ifdef TEGRA_PMX_SOC_HAS_IO_CLAMPING
+/* This register/field only exists on Tegra114 and later */
+#define APB_MISC_PP_PINMUX_GLOBAL_0 0x40
+#define CLAMP_INPUTS_WHEN_TRISTATED 1
+
+void pinmux_set_tristate_input_clamping(void)
+{
+	u32 *reg = _R(APB_MISC_PP_PINMUX_GLOBAL_0);
+
+	setbits_le32(reg, CLAMP_INPUTS_WHEN_TRISTATED);
+}
+
+void pinmux_clear_tristate_input_clamping(void)
+{
+	u32 *reg = _R(APB_MISC_PP_PINMUX_GLOBAL_0);
+
+	clrbits_le32(reg, CLAMP_INPUTS_WHEN_TRISTATED);
+}
+#endif
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+	u32 *reg = MUX_REG(pin);
+	int i, mux = -1;
+	u32 val;
+
+	if (func == PMUX_FUNC_DEFAULT)
+		return;
+
+	/* Error check on pin and func */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_func_isvalid(func));
+
+	if (func >= PMUX_FUNC_RSVD1) {
+		mux = (func - PMUX_FUNC_RSVD1) & 3;
+	} else {
+		/* Search for the appropriate function */
+		for (i = 0; i < 4; i++) {
+			if (tegra_soc_pingroups[pin].funcs[i] == func) {
+				mux = i;
+				break;
+			}
+		}
+	}
+	assert(mux != -1);
+
+	val = readl(reg);
+	val &= ~(3 << MUX_SHIFT(pin));
+	val |= (mux << MUX_SHIFT(pin));
+	writel(val, reg);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+	u32 *reg = PULL_REG(pin);
+	u32 val;
+
+	/* Error check on pin and pupd */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_pupd_isvalid(pupd));
+
+	val = readl(reg);
+	val &= ~(3 << PULL_SHIFT(pin));
+	val |= (pupd << PULL_SHIFT(pin));
+	writel(val, reg);
+}
+
+static void pinmux_set_tristate(enum pmux_pingrp pin, int tri)
+{
+	u32 *reg = TRI_REG(pin);
+	u32 val;
+
+	/* Error check on pin */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_tristate_isvalid(tri));
+
+	val = readl(reg);
+	if (tri == PMUX_TRI_TRISTATE)
+		val |= (1 << TRI_SHIFT(pin));
+	else
+		val &= ~(1 << TRI_SHIFT(pin));
+	writel(val, reg);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, PMUX_TRI_TRISTATE);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, PMUX_TRI_NORMAL);
+}
+
+#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (io == PMUX_PIN_NONE)
+		return;
+
+	/* Error check on pin and io */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_io_isvalid(io));
+
+	val = readl(reg);
+	if (io == PMUX_PIN_INPUT)
+		val |= (io & 1) << IO_SHIFT;
+	else
+		val &= ~(1 << IO_SHIFT);
+	writel(val, reg);
+}
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_LOCK
+static void pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (lock == PMUX_PIN_LOCK_DEFAULT)
+		return;
+
+	/* Error check on pin and lock */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_lock_isvalid(lock));
+
+	val = readl(reg);
+	if (lock == PMUX_PIN_LOCK_ENABLE) {
+		val |= (1 << LOCK_SHIFT);
+	} else {
+		if (val & (1 << LOCK_SHIFT))
+			printf("%s: Cannot clear LOCK bit!\n", __func__);
+		val &= ~(1 << LOCK_SHIFT);
+	}
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_OD
+static void pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (od == PMUX_PIN_OD_DEFAULT)
+		return;
+
+	/* Error check on pin and od */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_od_isvalid(od));
+
+	val = readl(reg);
+	if (od == PMUX_PIN_OD_ENABLE)
+		val |= (1 << OD_SHIFT);
+	else
+		val &= ~(1 << OD_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET
+static void pinmux_set_ioreset(enum pmux_pingrp pin,
+				enum pmux_pin_ioreset ioreset)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (ioreset == PMUX_PIN_IO_RESET_DEFAULT)
+		return;
+
+	/* Error check on pin and ioreset */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_ioreset_isvalid(ioreset));
+
+	val = readl(reg);
+	if (ioreset == PMUX_PIN_IO_RESET_ENABLE)
+		val |= (1 << IO_RESET_SHIFT);
+	else
+		val &= ~(1 << IO_RESET_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL
+static void pinmux_set_rcv_sel(enum pmux_pingrp pin,
+				enum pmux_pin_rcv_sel rcv_sel)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT)
+		return;
+
+	/* Error check on pin and rcv_sel */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_rcv_sel_isvalid(rcv_sel));
+
+	val = readl(reg);
+	if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH)
+		val |= (1 << RCV_SEL_SHIFT);
+	else
+		val &= ~(1 << RCV_SEL_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV
+static void pinmux_set_e_io_hv(enum pmux_pingrp pin,
+				enum pmux_pin_e_io_hv e_io_hv)
+{
+	u32 *reg = REG(pin);
+	u32 val;
+
+	if (e_io_hv == PMUX_PIN_E_IO_HV_DEFAULT)
+		return;
+
+	/* Error check on pin and e_io_hv */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_e_io_hv_isvalid(e_io_hv));
+
+	val = readl(reg);
+	if (e_io_hv == PMUX_PIN_E_IO_HV_HIGH)
+		val |= (1 << E_IO_HV_SHIFT);
+	else
+		val &= ~(1 << E_IO_HV_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_SCHMT
+static void pinmux_set_schmt(enum pmux_pingrp pin, enum pmux_schmt schmt)
+{
+	u32 *reg = REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (schmt == PMUX_SCHMT_NONE)
+		return;
+
+	/* Error check pad */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_schmt_isvalid(schmt));
+
+	val = readl(reg);
+	if (schmt == PMUX_SCHMT_ENABLE)
+		val |= (1 << SCHMT_SHIFT);
+	else
+		val &= ~(1 << SCHMT_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+#ifdef TEGRA_PMX_PINS_HAVE_HSM
+static void pinmux_set_hsm(enum pmux_pingrp pin, enum pmux_hsm hsm)
+{
+	u32 *reg = REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (hsm == PMUX_HSM_NONE)
+		return;
+
+	/* Error check pad */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_hsm_isvalid(hsm));
+
+	val = readl(reg);
+	if (hsm == PMUX_HSM_ENABLE)
+		val |= (1 << HSM_SHIFT);
+	else
+		val &= ~(1 << HSM_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+static void pinmux_config_pingrp(const struct pmux_pingrp_config *config)
+{
+	enum pmux_pingrp pin = config->pingrp;
+
+	pinmux_set_func(pin, config->func);
+	pinmux_set_pullupdown(pin, config->pull);
+	pinmux_set_tristate(pin, config->tristate);
+#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
+	pinmux_set_io(pin, config->io);
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_LOCK
+	pinmux_set_lock(pin, config->lock);
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_OD
+	pinmux_set_od(pin, config->od);
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET
+	pinmux_set_ioreset(pin, config->ioreset);
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL
+	pinmux_set_rcv_sel(pin, config->rcv_sel);
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV
+	pinmux_set_e_io_hv(pin, config->e_io_hv);
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_SCHMT
+	pinmux_set_schmt(pin, config->schmt);
+#endif
+#ifdef TEGRA_PMX_PINS_HAVE_HSM
+	pinmux_set_hsm(pin, config->hsm);
+#endif
+}
+
+void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config,
+				int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		pinmux_config_pingrp(&config[i]);
+}
+
+#ifdef TEGRA_PMX_SOC_HAS_DRVGRPS
+
+#define pmux_drvgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PMUX_DRVGRP_COUNT))
+
+#define pmux_slw_isvalid(slw) \
+	(((slw) >= PMUX_SLWF_MIN) && ((slw) <= PMUX_SLWF_MAX))
+
+#define pmux_drv_isvalid(drv) \
+	(((drv) >= PMUX_DRVUP_MIN) && ((drv) <= PMUX_DRVUP_MAX))
+
+#ifdef TEGRA_PMX_GRPS_HAVE_HSM
+#define HSM_SHIFT	2
+#endif
+#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
+#define SCHMT_SHIFT	3
+#endif
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+#define LPMD_SHIFT	4
+#define LPMD_MASK	(3 << LPMD_SHIFT)
+#endif
+/*
+ * Note that the following DRV* and SLW* defines are accurate for many drive
+ * groups on many SoCs. We really need a per-group data structure to solve
+ * this, since the fields are in different positions/sizes in different
+ * registers (for different groups).
+ *
+ * On Tegra30/114/124, the DRV*_SHIFT values vary.
+ * On Tegra30, the SLW*_SHIFT values vary.
+ * On Tegra30/114/124/210, the DRV*_MASK values vary, although the values
+ *   below are wide enough to cover the widest fields, and hopefully don't
+ *   interfere with any other fields.
+ * On Tegra30, the SLW*_MASK values vary, but we can't use a value that's
+ *   wide enough to cover all cases, since that would cause the field to
+ *   overlap with other fields in the narrower cases.
+ */
+#define DRVDN_SHIFT	12
+#define DRVDN_MASK	(0x7F << DRVDN_SHIFT)
+#define DRVUP_SHIFT	20
+#define DRVUP_MASK	(0x7F << DRVUP_SHIFT)
+#define SLWR_SHIFT	28
+#define SLWR_MASK	(3 << SLWR_SHIFT)
+#define SLWF_SHIFT	30
+#define SLWF_MASK	(3 << SLWF_SHIFT)
+
+static void pinmux_set_drvup_slwf(enum pmux_drvgrp grp, int slwf)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwf == PMUX_SLWF_NONE)
+		return;
+
+	/* Error check on pad and slwf */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_slw_isvalid(slwf));
+
+	val = readl(reg);
+	val &= ~SLWF_MASK;
+	val |= (slwf << SLWF_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_drvdn_slwr(enum pmux_drvgrp grp, int slwr)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwr == PMUX_SLWR_NONE)
+		return;
+
+	/* Error check on pad and slwr */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_slw_isvalid(slwr));
+
+	val = readl(reg);
+	val &= ~SLWR_MASK;
+	val |= (slwr << SLWR_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_drvup(enum pmux_drvgrp grp, int drvup)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvup == PMUX_DRVUP_NONE)
+		return;
+
+	/* Error check on pad and drvup */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_drv_isvalid(drvup));
+
+	val = readl(reg);
+	val &= ~DRVUP_MASK;
+	val |= (drvup << DRVUP_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+static void pinmux_set_drvdn(enum pmux_drvgrp grp, int drvdn)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvdn == PMUX_DRVDN_NONE)
+		return;
+
+	/* Error check on pad and drvdn */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_drv_isvalid(drvdn));
+
+	val = readl(reg);
+	val &= ~DRVDN_MASK;
+	val |= (drvdn << DRVDN_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+static void pinmux_set_lpmd(enum pmux_drvgrp grp, enum pmux_lpmd lpmd)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (lpmd == PMUX_LPMD_NONE)
+		return;
+
+	/* Error check pad and lpmd value */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_lpmd_isvalid(lpmd));
+
+	val = readl(reg);
+	val &= ~LPMD_MASK;
+	val |= (lpmd << LPMD_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
+static void pinmux_set_schmt(enum pmux_drvgrp grp, enum pmux_schmt schmt)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (schmt == PMUX_SCHMT_NONE)
+		return;
+
+	/* Error check pad */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_schmt_isvalid(schmt));
+
+	val = readl(reg);
+	if (schmt == PMUX_SCHMT_ENABLE)
+		val |= (1 << SCHMT_SHIFT);
+	else
+		val &= ~(1 << SCHMT_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_HSM
+static void pinmux_set_hsm(enum pmux_drvgrp grp, enum pmux_hsm hsm)
+{
+	u32 *reg = DRV_REG(grp);
+	u32 val;
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (hsm == PMUX_HSM_NONE)
+		return;
+
+	/* Error check pad */
+	assert(pmux_drvgrp_isvalid(grp));
+	assert(pmux_hsm_isvalid(hsm));
+
+	val = readl(reg);
+	if (hsm == PMUX_HSM_ENABLE)
+		val |= (1 << HSM_SHIFT);
+	else
+		val &= ~(1 << HSM_SHIFT);
+	writel(val, reg);
+
+	return;
+}
+#endif
+
+static void pinmux_config_drvgrp(const struct pmux_drvgrp_config *config)
+{
+	enum pmux_drvgrp grp = config->drvgrp;
+
+	pinmux_set_drvup_slwf(grp, config->slwf);
+	pinmux_set_drvdn_slwr(grp, config->slwr);
+	pinmux_set_drvup(grp, config->drvup);
+	pinmux_set_drvdn(grp, config->drvdn);
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+	pinmux_set_lpmd(grp, config->lpmd);
+#endif
+#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
+	pinmux_set_schmt(grp, config->schmt);
+#endif
+#ifdef TEGRA_PMX_GRPS_HAVE_HSM
+	pinmux_set_hsm(grp, config->hsm);
+#endif
+}
+
+void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config,
+				int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		pinmux_config_drvgrp(&config[i]);
+}
+#endif /* TEGRA_PMX_SOC_HAS_DRVGRPS */
+
+#ifdef TEGRA_PMX_SOC_HAS_MIPI_PAD_CTRL_GRPS
+
+#define pmux_mipipadctrlgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PMUX_MIPIPADCTRLGRP_COUNT))
+
+static void pinmux_mipipadctrl_set_func(enum pmux_mipipadctrlgrp grp,
+	enum pmux_func func)
+{
+	u32 *reg = MIPIPADCTRL_REG(grp);
+	int i, mux = -1;
+	u32 val;
+
+	if (func == PMUX_FUNC_DEFAULT)
+		return;
+
+	/* Error check grp and func */
+	assert(pmux_mipipadctrlgrp_isvalid(grp));
+	assert(pmux_func_isvalid(func));
+
+	if (func >= PMUX_FUNC_RSVD1) {
+		mux = (func - PMUX_FUNC_RSVD1) & 1;
+	} else {
+		/* Search for the appropriate function */
+		for (i = 0; i < 2; i++) {
+			if (tegra_soc_mipipadctrl_groups[grp].funcs[i]
+			    == func) {
+				mux = i;
+				break;
+			}
+		}
+	}
+	assert(mux != -1);
+
+	val = readl(reg);
+	val &= ~(1 << 1);
+	val |= (mux << 1);
+	writel(val, reg);
+}
+
+static void pinmux_config_mipipadctrlgrp(const struct pmux_mipipadctrlgrp_config *config)
+{
+	enum pmux_mipipadctrlgrp grp = config->grp;
+
+	pinmux_mipipadctrl_set_func(grp, config->func);
+}
+
+void pinmux_config_mipipadctrlgrp_table(
+	const struct pmux_mipipadctrlgrp_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		pinmux_config_mipipadctrlgrp(&config[i]);
+}
+#endif /* TEGRA_PMX_SOC_HAS_MIPI_PAD_CTRL_GRPS */
diff --git a/roms/u-boot/arch/arm/mach-tegra/pmc.c b/roms/u-boot/arch/arm/mach-tegra/pmc.c
new file mode 100644
index 000000000..8d617bee6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/pmc.c
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018-2019, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <asm/global_data.h>
+
+#include <linux/arm-smccc.h>
+
+#include <asm/io.h>
+#include <asm/arch-tegra/pmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if IS_ENABLED(CONFIG_TEGRA_PMC_SECURE)
+static bool tegra_pmc_detect_tz_only(void)
+{
+	static bool initialized = false;
+	static bool is_tz_only = false;
+	u32 value, saved;
+
+	if (!initialized) {
+		saved = readl(NV_PA_PMC_BASE + PMC_SCRATCH0);
+		value = saved ^ 0xffffffff;
+
+		if (value == 0xffffffff)
+			value = 0xdeadbeef;
+
+		/* write pattern and read it back */
+		writel(value, NV_PA_PMC_BASE + PMC_SCRATCH0);
+		value = readl(NV_PA_PMC_BASE + PMC_SCRATCH0);
+
+		/* if we read all-zeroes, access is restricted to TZ only */
+		if (value == 0) {
+			debug("access to PMC is restricted to TZ\n");
+			is_tz_only = true;
+		} else {
+			/* restore original value */
+			writel(saved, NV_PA_PMC_BASE + PMC_SCRATCH0);
+		}
+
+		initialized = true;
+	}
+
+	return is_tz_only;
+}
+#endif
+
+uint32_t tegra_pmc_readl(unsigned long offset)
+{
+#if IS_ENABLED(CONFIG_TEGRA_PMC_SECURE)
+	if (tegra_pmc_detect_tz_only()) {
+		struct arm_smccc_res res;
+
+		arm_smccc_smc(TEGRA_SMC_PMC, TEGRA_SMC_PMC_READ, offset, 0, 0,
+			      0, 0, 0, &res);
+		if (res.a0)
+			printf("%s(): SMC failed: %lu\n", __func__, res.a0);
+
+		return res.a1;
+	}
+#endif
+
+	return readl(NV_PA_PMC_BASE + offset);
+}
+
+void tegra_pmc_writel(u32 value, unsigned long offset)
+{
+#if IS_ENABLED(CONFIG_TEGRA_PMC_SECURE)
+	if (tegra_pmc_detect_tz_only()) {
+		struct arm_smccc_res res;
+
+		arm_smccc_smc(TEGRA_SMC_PMC, TEGRA_SMC_PMC_WRITE, offset,
+			      value, 0, 0, 0, 0, &res);
+		if (res.a0)
+			printf("%s(): SMC failed: %lu\n", __func__, res.a0);
+
+		return;
+	}
+#endif
+
+	writel(value, NV_PA_PMC_BASE + offset);
+}
+
+void reset_cpu(void)
+{
+	u32 value;
+
+	value = tegra_pmc_readl(PMC_CNTRL);
+	value |= PMC_CNTRL_MAIN_RST;
+	tegra_pmc_writel(value, PMC_CNTRL);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/powergate.c b/roms/u-boot/arch/arm/mach-tegra/powergate.c
new file mode 100644
index 000000000..631bc04e9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/powergate.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2019, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/types.h>
+
+#include <asm/arch/powergate.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/pmc.h>
+
+#define PWRGATE_TOGGLE 0x30
+#define  PWRGATE_TOGGLE_START (1 << 8)
+
+#define REMOVE_CLAMPING 0x34
+
+#define PWRGATE_STATUS 0x38
+
+static int tegra_powergate_set(enum tegra_powergate id, bool state)
+{
+	u32 value, mask = state ? (1 << id) : 0, old_mask;
+	unsigned long start, timeout = 25;
+
+	value = tegra_pmc_readl(PWRGATE_STATUS);
+	old_mask = value & (1 << id);
+
+	if (mask == old_mask)
+		return 0;
+
+	tegra_pmc_writel(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE);
+
+	start = get_timer(0);
+
+	while (get_timer(start) < timeout) {
+		value = tegra_pmc_readl(PWRGATE_STATUS);
+		if ((value & (1 << id)) == mask)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+int tegra_powergate_power_on(enum tegra_powergate id)
+{
+	return tegra_powergate_set(id, true);
+}
+
+int tegra_powergate_power_off(enum tegra_powergate id)
+{
+	return tegra_powergate_set(id, false);
+}
+
+static int tegra_powergate_remove_clamping(enum tegra_powergate id)
+{
+	unsigned long value;
+
+	/*
+	 * The REMOVE_CLAMPING register has the bits for the PCIE and VDEC
+	 * partitions reversed. This was originally introduced on Tegra20 but
+	 * has since been carried forward for backwards-compatibility.
+	 */
+	if (id == TEGRA_POWERGATE_VDEC)
+		value = 1 << TEGRA_POWERGATE_PCIE;
+	else if (id == TEGRA_POWERGATE_PCIE)
+		value = 1 << TEGRA_POWERGATE_VDEC;
+	else
+		value = 1 << id;
+
+	tegra_pmc_writel(value, REMOVE_CLAMPING);
+
+	return 0;
+}
+
+int tegra_powergate_sequence_power_up(enum tegra_powergate id,
+				      enum periph_id periph)
+{
+	int err;
+
+	reset_set_enable(periph, 1);
+
+	err = tegra_powergate_power_on(id);
+	if (err < 0)
+		return err;
+
+	clock_enable(periph);
+
+	udelay(10);
+
+	err = tegra_powergate_remove_clamping(id);
+	if (err < 0)
+		return err;
+
+	udelay(10);
+
+	reset_set_enable(periph, 0);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/psci.S b/roms/u-boot/arch/arm/mach-tegra/psci.S
new file mode 100644
index 000000000..f9eb37fc7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/psci.S
@@ -0,0 +1,110 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, NVIDIA
+ * Copyright (C) 2015, Siemens AG
+ *
+ * Authors:
+ *  Thierry Reding <treding@nvidia.com>
+ *  Jan Kiszka <jan.kiszka@siemens.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/psci.h>
+
+	.pushsection ._secure.text, "ax"
+	.arch_extension sec
+
+#define TEGRA_SB_CSR_0			0x6000c200
+#define NS_RST_VEC_WR_DIS		(1 << 1)
+
+#define TEGRA_RESET_EXCEPTION_VECTOR	0x6000f100
+
+#define TEGRA_FLOW_CTRL_BASE		0x60007000
+#define FLOW_CTRL_CPU_CSR		0x08
+#define CSR_ENABLE			(1 << 0)
+#define CSR_IMMEDIATE_WAKE		(1 << 3)
+#define CSR_WAIT_WFI_SHIFT		8
+#define FLOW_CTRL_CPU1_CSR		0x18
+
+@ converts CPU ID into FLOW_CTRL_CPUn_CSR offset
+.macro get_csr_reg cpu, ofs, tmp
+	cmp	\cpu, #0		@ CPU0?
+	lsl	\tmp, \cpu, #3	@ multiple by 8 (register offset CPU1-3)
+	moveq	\ofs, #FLOW_CTRL_CPU_CSR
+	addne	\ofs, \tmp, #FLOW_CTRL_CPU1_CSR - 8
+.endm
+
+ENTRY(psci_arch_init)
+	mov	r6, lr
+
+	mrc	p15, 0, r5, c1, c1, 0	@ Read SCR
+	bic	r5, r5, #1		@ Secure mode
+	mcr	p15, 0, r5, c1, c1, 0	@ Write SCR
+	isb
+
+	@ lock reset vector for non-secure
+	ldr	r4, =TEGRA_SB_CSR_0
+	ldr	r5, [r4]
+	orr	r5, r5, #NS_RST_VEC_WR_DIS
+	str	r5, [r4]
+
+	bl	psci_get_cpu_id		@ CPU ID => r0
+
+	adr	r5, _sys_clock_freq
+	cmp	r0, #0
+
+	mrceq	p15, 0, r7, c14, c0, 0	@ read CNTFRQ from CPU0
+	streq	r7, [r5]
+
+	ldrne	r7, [r5]
+	mcrne	p15, 0, r7, c14, c0, 0	@ write CNTFRQ to CPU1..3
+
+	bx	r6
+ENDPROC(psci_arch_init)
+
+_sys_clock_freq:
+	.word	0
+
+ENTRY(psci_cpu_off)
+	bl	psci_cpu_off_common
+
+	bl	psci_get_cpu_id		@ CPU ID => r0
+
+	get_csr_reg r0, r2, r3
+
+	ldr	r6, =TEGRA_FLOW_CTRL_BASE
+	mov	r5, #(CSR_ENABLE)
+	mov	r4, #(1 << CSR_WAIT_WFI_SHIFT)
+	add	r5, r4, lsl r0
+	str	r5, [r6, r2]
+
+_loop:	wfi
+	b	_loop
+ENDPROC(psci_cpu_off)
+
+ENTRY(psci_cpu_on)
+	push	{r4, r5, r6, lr}
+
+	mov	r4, r1
+	mov	r0, r1
+	mov	r1, r2
+	mov	r2, r3
+	bl	psci_save		@ store target PC and context id
+	mov	r1, r4
+
+	ldr	r6, =TEGRA_RESET_EXCEPTION_VECTOR
+	ldr	r5, =psci_cpu_entry
+	str	r5, [r6]
+
+	get_csr_reg r1, r2, r3
+
+	ldr	r6, =TEGRA_FLOW_CTRL_BASE
+	mov	r5, #(CSR_IMMEDIATE_WAKE | CSR_ENABLE)
+	str	r5, [r6, r2]
+
+	mov	r0, #ARM_PSCI_RET_SUCCESS	@ Return PSCI_RET_SUCCESS
+	pop	{r4, r5, r6, pc}
+ENDPROC(psci_cpu_on)
+
+	.popsection
diff --git a/roms/u-boot/arch/arm/mach-tegra/spl.c b/roms/u-boot/arch/arm/mach-tegra/spl.c
new file mode 100644
index 000000000..ed897efc5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/spl.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012
+ * NVIDIA Inc, <www.nvidia.com>
+ *
+ * Allen Martin <amartin@nvidia.com>
+ */
+#include <common.h>
+#include <debug_uart.h>
+#include <log.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/apb_misc.h>
+#include <asm/arch-tegra/board.h>
+#include <asm/spl.h>
+#include "cpu.h"
+
+void spl_board_init(void)
+{
+	struct apb_misc_pp_ctlr *apb_misc =
+				(struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
+
+	/* enable JTAG */
+	writel(0xC0, &apb_misc->cfg_ctl);
+
+	board_init_uart_f();
+
+	/* Initialize periph GPIOs */
+	gpio_early_init_uart();
+
+	clock_early_init();
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
+	preloader_console_init();
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_RAM;
+}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+	debug("image entry point: 0x%lX\n", spl_image->entry_point);
+
+	start_cpu((u32)spl_image->entry_point);
+	halt_avp();
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/sys_info.c b/roms/u-boot/arch/arm/mach-tegra/sys_info.c
new file mode 100644
index 000000000..5ad586ac1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/sys_info.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/ctype.h>
+#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA30)
+#include <asm/arch-tegra/pmc.h>
+
+static char *get_reset_cause(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	switch (pmc->pmc_reset_status) {
+	case 0x00:
+		return "POR";
+	case 0x01:
+		return "WATCHDOG";
+	case 0x02:
+		return "SENSOR";
+	case 0x03:
+		return "SW_MAIN";
+	case 0x04:
+		return "LP0";
+	}
+	return "UNKNOWN";
+}
+#endif
+
+/* Print CPU information */
+int print_cpuinfo(void)
+{
+	printf("SoC: %s\n", CONFIG_SYS_SOC);
+#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA30)
+	printf("Reset cause: %s\n", get_reset_cause());
+#endif
+
+	/* TBD: Add printf of major/minor rev info, stepping, etc. */
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra114/Kconfig b/roms/u-boot/arch/arm/mach-tegra/tegra114/Kconfig
new file mode 100644
index 000000000..5f0f909dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra114/Kconfig
@@ -0,0 +1,18 @@
+if TEGRA114
+
+choice
+	prompt "Tegra114 board select"
+	optional
+
+config TARGET_DALMORE
+	bool "NVIDIA Tegra114 Dalmore evaluation board"
+	select BOARD_LATE_INIT
+
+endchoice
+
+config SYS_SOC
+	default "tegra114"
+
+source "board/nvidia/dalmore/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra114/Makefile b/roms/u-boot/arch/arm/mach-tegra/tegra114/Makefile
new file mode 100644
index 000000000..0e8f32cbd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra114/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+
+obj-$(CONFIG_SPL_BUILD) += cpu.o
+
+obj-y	+= clock.o funcmux.o pinmux.o
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra114/clock.c b/roms/u-boot/arch/arm/mach-tegra/tegra114/clock.c
new file mode 100644
index 000000000..167589d1b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra114/clock.c
@@ -0,0 +1,758 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra114 Clock control functions */
+
+#include <common.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sysctr.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <linux/delay.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra114 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
+	CLOCK_TYPE_MCPA,	/* and so on */
+	CLOCK_TYPE_MCPT,
+	CLOCK_TYPE_PCM,
+	CLOCK_TYPE_PCMT,
+	CLOCK_TYPE_PCMT16,
+	CLOCK_TYPE_PDCT,
+	CLOCK_TYPE_ACPT,
+	CLOCK_TYPE_ASPTE,
+	CLOCK_TYPE_PMDACD2T,
+	CLOCK_TYPE_PCST,
+
+	CLOCK_TYPE_COUNT,
+	CLOCK_TYPE_NONE = -1,   /* invalid clock type */
+};
+
+enum {
+	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ *  The extra column in each clock source array is used to store the mask
+ *  bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(SFROM32KHZ),	CLK(PERIPH),	CLK(OSC),
+		CLK(EPCI),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(MEMORY),	CLK(DISPLAY),	CLK(AUDIO),
+		CLK(CGENERAL),	CLK(DISPLAY2),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_28}
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+	/* 0x00 */
+	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PCM),
+	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PCST),  /* only PWM uses b29:28 */
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC3,	CLOCK_TYPE_PCMT),
+
+	/* 0x08 */
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_I2C5,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PMDACD2T),
+
+	/* 0x10 */
+	TYPE(PERIPHC_CVE,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_G3D,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_G2D,	CLOCK_TYPE_MCPA),
+
+	/* 0x18 */
+	TYPE(PERIPHC_NDFLASH,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_EPP,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MPE,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MIPI,	CLOCK_TYPE_PCMT),	/* MIPI base-band HSI */
+	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PCMT),
+
+	/* 0x20 */
+	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVO,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_HDMI,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVDAC,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPT),
+
+	/* 0x28 */
+	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PCMT),
+
+	/* 0x30 */
+	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2S0,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+
+	/* 0x38h */  /* Jumps to reg offset 0x3B0h */
+	TYPE(PERIPHC_G3D2,      CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MSELECT,   CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_TSENSOR,   CLOCK_TYPE_PCST),	/* s/b PCTS */
+	TYPE(PERIPHC_I2S3,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S4,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2C4,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SBC5,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC6,	CLOCK_TYPE_PCMT),
+
+	/* 0x40 */
+	TYPE(PERIPHC_AUDIO,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DAM0,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM1,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM2,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_ACTMON,	CLOCK_TYPE_PCST),	/* MASK 31:30 */
+	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+	/* 0x48 */
+	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_NANDSPEED,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2CSLOW,	CLOCK_TYPE_PCST),	/* MASK 31:30 */
+	TYPE(PERIPHC_SYS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SPEEDO,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+
+	/* 0x50 */
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SATAOOB,	CLOCK_TYPE_PCMT),	/* offset 0x420h */
+	TYPE(PERIPHC_SATA,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_HDA,	CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
+ *	SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+	/* Low word: 31:0 */
+	NONE(CPU),
+	NONE(COP),
+	NONE(TRIGSYS),
+	NONE(RESERVED3),
+	NONE(RTC),
+	NONE(TMR),
+	PERIPHC_UART1,
+	PERIPHC_UART2,	/* and vfir 0x68 */
+
+	/* 8 */
+	NONE(GPIO),
+	PERIPHC_SDMMC2,
+	NONE(SPDIF),		/* 0x08 and 0x0c, unclear which to use */
+	PERIPHC_I2S1,
+	PERIPHC_I2C1,
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC4,
+
+	/* 16 */
+	NONE(RESERVED16),
+	PERIPHC_PWM,
+	PERIPHC_I2S2,
+	PERIPHC_EPP,
+	PERIPHC_VI,
+	PERIPHC_G2D,
+	NONE(USBD),
+	NONE(ISP),
+
+	/* 24 */
+	PERIPHC_G3D,
+	NONE(RESERVED25),
+	PERIPHC_DISP2,
+	PERIPHC_DISP1,
+	PERIPHC_HOST1X,
+	NONE(VCP),
+	PERIPHC_I2S0,
+	NONE(CACHE2),
+
+	/* Middle word: 63:32 */
+	NONE(MEM),
+	NONE(AHBDMA),
+	NONE(APBDMA),
+	NONE(RESERVED35),
+	NONE(RESERVED36),
+	NONE(STAT_MON),
+	NONE(RESERVED38),
+	NONE(RESERVED39),
+
+	/* 40 */
+	NONE(KFUSE),
+	NONE(SBC1),	/* SBC1, 0x34, is this SPI1? */
+	PERIPHC_NOR,
+	NONE(RESERVED43),
+	PERIPHC_SBC2,
+	NONE(RESERVED45),
+	PERIPHC_SBC3,
+	PERIPHC_I2C5,
+
+	/* 48 */
+	NONE(DSI),
+	PERIPHC_TVO,	/* also CVE 0x40 */
+	PERIPHC_MIPI,
+	PERIPHC_HDMI,
+	NONE(CSI),
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_UART3,
+
+	/* 56 */
+	NONE(RESERVED56),
+	PERIPHC_EMC,
+	NONE(USB2),
+	NONE(USB3),
+	PERIPHC_MPE,
+	PERIPHC_VDE,
+	NONE(BSEA),
+	NONE(BSEV),
+
+	/* Upper word 95:64 */
+	PERIPHC_SPEEDO,
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_I2C3,
+	PERIPHC_SBC4,
+	PERIPHC_SDMMC3,
+	NONE(PCIE),
+	PERIPHC_OWR,
+
+	/* 72 */
+	NONE(AFI),
+	PERIPHC_CSITE,
+	NONE(PCIEXCLK),
+	NONE(AVPUCQ),
+	NONE(RESERVED76),
+	NONE(RESERVED77),
+	NONE(RESERVED78),
+	NONE(DTV),
+
+	/* 80 */
+	PERIPHC_NANDSPEED,
+	PERIPHC_I2CSLOW,
+	NONE(DSIB),
+	NONE(RESERVED83),
+	NONE(IRAMA),
+	NONE(IRAMB),
+	NONE(IRAMC),
+	NONE(IRAMD),
+
+	/* 88 */
+	NONE(CRAM2),
+	NONE(RESERVED89),
+	NONE(MDOUBLER),
+	NONE(RESERVED91),
+	NONE(SUSOUT),
+	NONE(RESERVED93),
+	NONE(RESERVED94),
+	NONE(RESERVED95),
+
+	/* V word: 31:0 */
+	NONE(CPUG),
+	NONE(CPULP),
+	PERIPHC_G3D2,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+
+	/* 08 */
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+	PERIPHC_AUDIO,
+	NONE(APBIF),
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+
+	/* 16 */
+	NONE(ATOMICS),
+	NONE(RESERVED17),
+	NONE(RESERVED18),
+	NONE(RESERVED19),
+	NONE(RESERVED20),
+	NONE(RESERVED21),
+	NONE(RESERVED22),
+	PERIPHC_ACTMON,
+
+	/* 24 */
+	NONE(RESERVED24),
+	NONE(RESERVED25),
+	NONE(RESERVED26),
+	NONE(RESERVED27),
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+	NONE(RESERVED30),
+	NONE(RESERVED31),
+
+	/* W word: 31:0 */
+	NONE(HDA2HDMICODEC),
+	NONE(RESERVED1_SATACOLD),
+	NONE(RESERVED2_PCIERX0),
+	NONE(RESERVED3_PCIERX1),
+	NONE(RESERVED4_PCIERX2),
+	NONE(RESERVED5_PCIERX3),
+	NONE(RESERVED6_PCIERX4),
+	NONE(RESERVED7_PCIERX5),
+
+	/* 40 */
+	NONE(CEC),
+	NONE(PCIE2_IOBIST),
+	NONE(EMC_IOBIST),
+	NONE(HDMI_IOBIST),
+	NONE(SATA_IOBIST),
+	NONE(MIPI_IOBIST),
+	NONE(EMC1_IOBIST),
+	NONE(XUSB),
+
+	/* 48 */
+	NONE(CILAB),
+	NONE(CILCD),
+	NONE(CILE),
+	NONE(DSIA_LP),
+	NONE(DSIB_LP),
+	NONE(RESERVED21_ENTROPY),
+	NONE(RESERVED22_W),
+	NONE(RESERVED23_W),
+
+	/* 56 */
+	NONE(RESERVED24_W),
+	NONE(AMX0),
+	NONE(ADX0),
+	NONE(DVFS),
+	NONE(XUSB_SS),
+	NONE(EMC_DLL),
+	NONE(MC1),
+	NONE(EMC1),
+};
+
+/*
+ * PLL divider shift/mask tables for all PLL IDs.
+ */
+struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
+	/*
+	 * T114: some deviations from T2x/T30.
+	 * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.)
+	 *       If lock_ena or lock_det are >31, they're not used in that PLL.
+	 */
+
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 20, .p_mask = 0x0F,
+	  .lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 },	/* PLLC */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 0,  .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLM */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLP */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLA */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x01,
+	  .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLU */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLD */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 20, .p_mask = 0x0F,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 },	/* PLLX */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 9,  .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLE */
+	{ .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLS (RESERVED) */
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that T30/T114 support 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+	if (reg & 1)				/* one of the newer freqs */
+		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
+
+	return reg >> 2;	/* Map to most common (T20) freqs */
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	enum periphc_internal_id internal_id;
+
+	/* Coresight is a special case */
+	if (periph_id == PERIPH_ID_CSI)
+		return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+	assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(internal_id != -1);
+	if (internal_id >= PERIPHC_VW_FIRST) {
+		internal_id -= PERIPHC_VW_FIRST;
+		return &clkrst->crc_clk_src_vw[internal_id];
+	} else
+		return &clkrst->crc_clk_src[internal_id];
+}
+
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+			  int *divider_bits, int *type)
+{
+	enum periphc_internal_id internal_id;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return -1;
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	if (!periphc_internal_id_isvalid(internal_id))
+		return -1;
+
+	*type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(*type))
+		return -1;
+
+	*mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+	if (*type == CLOCK_TYPE_PCMT16)
+		*divider_bits = 16;
+	else
+		*divider_bits = 8;
+
+	return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+	enum periphc_internal_id internal_id;
+	int type;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return CLOCK_ID_NONE;
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	if (!periphc_internal_id_isvalid(internal_id))
+		return CLOCK_ID_NONE;
+
+	type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(type))
+		return CLOCK_ID_NONE;
+
+	return clock_source[type][source];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id	peripheral to start
+ * @param source	PLL id of required parent clock
+ * @param mux_bits	Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+	enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+	enum clock_type_id type;
+	int mux, err;
+
+	err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+	assert(!err);
+
+	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+		if (clock_source[type][mux] == parent)
+			return mux;
+
+	/* if we get here, either us or the caller has made a mistake */
+	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+		parent);
+	return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *clk;
+	u32 reg;
+
+	/* Enable/disable the clock to this peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+		clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+	else
+		clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+	reg = readl(clk);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *reset;
+	u32 reg;
+
+	/* Enable/disable reset to the peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if (periph_id < PERIPH_ID_VW_FIRST)
+		reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+	else
+		reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+	reg = readl(reset);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, reset);
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id    Clock ID according to tegra114 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+	if (clk_id > PERIPH_ID_COUNT)
+		return PERIPH_ID_NONE;
+
+	switch (clk_id) {
+	case PERIPH_ID_RESERVED3:
+	case PERIPH_ID_RESERVED16:
+	case PERIPH_ID_RESERVED24:
+	case PERIPH_ID_RESERVED35:
+	case PERIPH_ID_RESERVED43:
+	case PERIPH_ID_RESERVED45:
+	case PERIPH_ID_RESERVED56:
+	case PERIPH_ID_RESERVED76:
+	case PERIPH_ID_RESERVED77:
+	case PERIPH_ID_RESERVED78:
+	case PERIPH_ID_RESERVED83:
+	case PERIPH_ID_RESERVED89:
+	case PERIPH_ID_RESERVED91:
+	case PERIPH_ID_RESERVED93:
+	case PERIPH_ID_RESERVED94:
+	case PERIPH_ID_RESERVED95:
+		return PERIPH_ID_NONE;
+	default:
+		return clk_id;
+	}
+}
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
+
+void clock_early_init(void)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct clk_pll_info *pllinfo;
+	u32 data;
+
+	tegra30_set_up_pllp();
+
+	/* clear IDDQ before accessing any other PLLC registers */
+	pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL];
+	clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ);
+	udelay(2);
+
+	/*
+	 * PLLC output frequency set to 600Mhz
+	 * PLLD output frequency set to 925Mhz
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+
+	/* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */
+	writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]);
+
+	/* PLLC_MISC: Set LOCK_ENABLE */
+	pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL];
+	setbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, (1 << pllinfo->lock_ena));
+	udelay(2);
+
+	/* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1, and enable lock */
+	pllinfo = &tegra_pll_info_table[CLOCK_ID_DISPLAY];
+	data = (12 << pllinfo->kcp_shift) | (1 << pllinfo->kvco_shift);
+	data |= (1 << PLLD_CLKENABLE) | (1 << pllinfo->lock_ena);
+	writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
+	udelay(2);
+}
+
+void arch_timer_init(void)
+{
+	struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
+	u32 freq, val;
+
+	freq = clock_get_rate(CLOCK_ID_CLK_M);
+	debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq);
+
+	/* ARM CNTFRQ */
+	asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
+
+	/* Only T114 has the System Counter regs */
+	debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq);
+	writel(freq, &sysctr->cntfid0);
+
+	val = readl(&sysctr->cntcr);
+	val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG;
+	writel(val, &sysctr->cntcr);
+	debug("%s: TSC CNTCR = 0x%08X\n", __func__, val);
+}
+
+struct periph_clk_init periph_clk_init_table[] = {
+	{ PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC5, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC6, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_DISP1, CLOCK_ID_CGENERAL },
+	{ PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
+	{ PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C5, CLOCK_ID_PERIPH },
+	{ -1, },
+};
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra114/cpu.c b/roms/u-boot/arch/arm/mach-tegra/tegra114/cpu.c
new file mode 100644
index 000000000..62c105363
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra114/cpu.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2014
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <linux/delay.h>
+#include "../cpu.h"
+
+/* Tegra114-specific CPU init code */
+static void enable_cpu_power_rail(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	debug("%s entry\n", __func__);
+
+	/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
+	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
+	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
+
+	/*
+	 * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
+	 * set it for 25ms (102MHz * .025)
+	 */
+	reg = 0x26E8F0;
+	writel(reg, &pmc->pmc_cpupwrgood_timer);
+
+	/* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
+	clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
+	setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
+
+	/*
+	 * Set CLK_RST_CONTROLLER_CPU_SOFTRST_CTRL2_0_CAR2PMC_CPU_ACK_WIDTH
+	 * to 408 to satisfy the requirement of having at least 16 CPU clock
+	 * cycles before clamp removal.
+	 */
+
+	clrbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 0xFFF);
+	setbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 408);
+}
+
+static void enable_cpu_clocks(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_XCPU];
+	u32 reg;
+
+	debug("%s entry\n", __func__);
+
+	/* Wait for PLL-X to lock */
+	do {
+		reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+	} while ((reg & (1 << pllinfo->lock_det)) == 0);
+
+	/* Wait until all clocks are stable */
+	udelay(PLL_STABILIZATION_DELAY);
+
+	writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+	writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
+
+	/* Always enable the main CPU complex clocks */
+	clock_enable(PERIPH_ID_CPU);
+	clock_enable(PERIPH_ID_CPULP);
+	clock_enable(PERIPH_ID_CPUG);
+}
+
+static void remove_cpu_resets(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	debug("%s entry\n", __func__);
+	/* Take the slow non-CPU partition out of reset */
+	reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
+	writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpulp_cmplx_clr);
+
+	/* Take the fast non-CPU partition out of reset */
+	reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
+	writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpug_cmplx_clr);
+
+	/* Clear the SW-controlled reset of the slow cluster */
+	reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
+	reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
+	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
+
+	/* Clear the SW-controlled reset of the fast cluster */
+	reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
+	reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
+	reg |= (CLR_CPURESET1+CLR_DBGRESET1+CLR_CORERESET1+CLR_CXRESET1);
+	reg |= (CLR_CPURESET2+CLR_DBGRESET2+CLR_CORERESET2+CLR_CXRESET2);
+	reg |= (CLR_CPURESET3+CLR_DBGRESET3+CLR_CORERESET3+CLR_CXRESET3);
+	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
+}
+
+/**
+ * Tegra114 requires some special clock initialization, including setting up
+ * the DVC I2C, turning on MSELECT and selecting the G CPU cluster
+ */
+void t114_init_clocks(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+	u32 val;
+
+	debug("%s entry\n", __func__);
+
+	/* Set active CPU cluster to G */
+	clrbits_le32(&flow->cluster_control, 1);
+
+	writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
+
+	debug("Setting up PLLX\n");
+	init_pllx();
+
+	val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
+	writel(val, &clkrst->crc_clk_sys_rate);
+
+	/* Enable clocks to required peripherals. TBD - minimize this list */
+	debug("Enabling clocks\n");
+
+	clock_set_enable(PERIPH_ID_CACHE2, 1);
+	clock_set_enable(PERIPH_ID_GPIO, 1);
+	clock_set_enable(PERIPH_ID_TMR, 1);
+	clock_set_enable(PERIPH_ID_RTC, 1);
+	clock_set_enable(PERIPH_ID_CPU, 1);
+	clock_set_enable(PERIPH_ID_EMC, 1);
+	clock_set_enable(PERIPH_ID_I2C5, 1);
+	clock_set_enable(PERIPH_ID_FUSE, 1);
+	clock_set_enable(PERIPH_ID_PMC, 1);
+	clock_set_enable(PERIPH_ID_APBDMA, 1);
+	clock_set_enable(PERIPH_ID_MEM, 1);
+	clock_set_enable(PERIPH_ID_IRAMA, 1);
+	clock_set_enable(PERIPH_ID_IRAMB, 1);
+	clock_set_enable(PERIPH_ID_IRAMC, 1);
+	clock_set_enable(PERIPH_ID_IRAMD, 1);
+	clock_set_enable(PERIPH_ID_CORESIGHT, 1);
+	clock_set_enable(PERIPH_ID_MSELECT, 1);
+	clock_set_enable(PERIPH_ID_EMC1, 1);
+	clock_set_enable(PERIPH_ID_MC1, 1);
+	clock_set_enable(PERIPH_ID_DVFS, 1);
+
+	/*
+	 * Set MSELECT clock source as PLLP (00), and ask for a clock
+	 * divider that would set the MSELECT clock at 102MHz for a
+	 * PLLP base of 408MHz.
+	 */
+	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
+		CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
+
+	/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
+	clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
+
+	/* Give clocks time to stabilize */
+	udelay(1000);
+
+	/* Take required peripherals out of reset */
+	debug("Taking periphs out of reset\n");
+	reset_set_enable(PERIPH_ID_CACHE2, 0);
+	reset_set_enable(PERIPH_ID_GPIO, 0);
+	reset_set_enable(PERIPH_ID_TMR, 0);
+	reset_set_enable(PERIPH_ID_COP, 0);
+	reset_set_enable(PERIPH_ID_EMC, 0);
+	reset_set_enable(PERIPH_ID_I2C5, 0);
+	reset_set_enable(PERIPH_ID_FUSE, 0);
+	reset_set_enable(PERIPH_ID_APBDMA, 0);
+	reset_set_enable(PERIPH_ID_MEM, 0);
+	reset_set_enable(PERIPH_ID_CORESIGHT, 0);
+	reset_set_enable(PERIPH_ID_MSELECT, 0);
+	reset_set_enable(PERIPH_ID_EMC1, 0);
+	reset_set_enable(PERIPH_ID_MC1, 0);
+	reset_set_enable(PERIPH_ID_DVFS, 0);
+
+	debug("%s exit\n", __func__);
+}
+
+static bool is_partition_powered(u32 partid)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	u32 reg;
+
+	/* Get power gate status */
+	reg = readl(&pmc->pmc_pwrgate_status);
+	return !!(reg & (1 << partid));
+}
+
+static bool is_clamp_enabled(u32 partid)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	u32 reg;
+
+	/* Get clamp status. */
+	reg = readl(&pmc->pmc_clamp_status);
+	return !!(reg & (1 << partid));
+}
+
+static void power_partition(u32 partid)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	debug("%s: part ID = %08X\n", __func__, partid);
+	/* Is the partition already on? */
+	if (!is_partition_powered(partid)) {
+		/* No, toggle the partition power state (OFF -> ON) */
+		debug("power_partition, toggling state\n");
+		writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
+
+		/* Wait for the power to come up */
+		while (!is_partition_powered(partid))
+			;
+
+		/* Wait for the clamp status to be cleared */
+		while (is_clamp_enabled(partid))
+			;
+
+		/* Give I/O signals time to stabilize */
+		udelay(IO_STABILIZATION_DELAY);
+	}
+}
+
+void powerup_cpus(void)
+{
+	/* We boot to the fast cluster */
+	debug("%s entry: G cluster\n", __func__);
+
+	/* Power up the fast cluster rail partition */
+	power_partition(CRAIL);
+
+	/* Power up the fast cluster non-CPU partition */
+	power_partition(C0NC);
+
+	/* Power up the fast cluster CPU0 partition */
+	power_partition(CE0);
+}
+
+void start_cpu(u32 reset_vector)
+{
+	u32 imme, inst;
+
+	debug("%s entry, reset_vector = %x\n", __func__, reset_vector);
+
+	t114_init_clocks();
+
+	/* Enable VDD_CPU */
+	enable_cpu_power_rail();
+
+	/* Get the CPU(s) running */
+	enable_cpu_clocks();
+
+	/* Enable CoreSight */
+	clock_enable_coresight(1);
+
+	/* Take CPU(s) out of reset */
+	remove_cpu_resets();
+
+	/* Set the entry point for CPU execution from reset */
+
+	/*
+	 * A01P with patched boot ROM; vector hard-coded to 0x4003fffc.
+	 * See nvbug 1193357 for details.
+	 */
+
+	/* mov r0, #lsb(reset_vector) */
+	imme = reset_vector & 0xffff;
+	inst = imme & 0xfff;
+	inst |= ((imme >> 12) << 16);
+	inst |= 0xe3000000;
+	writel(inst, 0x4003fff0);
+
+	/* movt r0, #msb(reset_vector) */
+	imme = (reset_vector >> 16) & 0xffff;
+	inst = imme & 0xfff;
+	inst |= ((imme >> 12) << 16);
+	inst |= 0xe3400000;
+	writel(inst, 0x4003fff4);
+
+	/* bx r0 */
+	writel(0xe12fff10, 0x4003fff8);
+
+	/* b -12 */
+	imme = (u32)-20;
+	inst = (imme >> 2) & 0xffffff;
+	inst |= 0xea000000;
+	writel(inst, 0x4003fffc);
+
+	/* Write to original location for compatibility */
+	writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+	/* If the CPU(s) don't already have power, power 'em up */
+	powerup_cpus();
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra114/funcmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra114/funcmux.c
new file mode 100644
index 000000000..23a27c868
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra114/funcmux.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra114 high-level function multiplexing */
+
+#include <common.h>
+#include <log.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+	int bad_config = config != FUNCMUX_DEFAULT;
+
+	switch (id) {
+	case PERIPH_ID_UART4:
+		switch (config) {
+		case FUNCMUX_UART4_GMI:
+			pinmux_set_func(PMUX_PINGRP_GMI_A16_PJ7,
+					PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_GMI_A17_PB0,
+					PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_GMI_A18_PB1,
+					PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_GMI_A19_PK7,
+					PMUX_FUNC_UARTD);
+
+			pinmux_set_io(PMUX_PINGRP_GMI_A16_PJ7, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PMUX_PINGRP_GMI_A17_PB0, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_GMI_A18_PB1, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_GMI_A19_PK7, PMUX_PIN_OUTPUT);
+
+			pinmux_tristate_disable(PMUX_PINGRP_GMI_A16_PJ7);
+			pinmux_tristate_disable(PMUX_PINGRP_GMI_A17_PB0);
+			pinmux_tristate_disable(PMUX_PINGRP_GMI_A18_PB1);
+			pinmux_tristate_disable(PMUX_PINGRP_GMI_A19_PK7);
+			break;
+		}
+		break;
+
+	/* Add other periph IDs here as needed */
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra114/pinmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra114/pinmux.c
new file mode 100644
index 000000000..11796602c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra114/pinmux.c
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+
+#define PIN(pin, f0, f1, f2, f3)	\
+	{				\
+		.funcs = {		\
+			PMUX_FUNC_##f0,	\
+			PMUX_FUNC_##f1,	\
+			PMUX_FUNC_##f2,	\
+			PMUX_FUNC_##f3,	\
+		},			\
+	}
+
+#define PIN_RESERVED {}
+
+static const struct pmux_pingrp_desc tegra114_pingroups[] = {
+	/*  pin,                    f0,         f1,       f2,           f3 */
+	/* Offset 0x3000 */
+	PIN(ULPI_DATA0_PO1,         SPI3,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA1_PO2,         SPI3,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA2_PO3,         SPI3,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA3_PO4,         SPI3,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA4_PO5,         SPI2,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA5_PO6,         SPI2,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA6_PO7,         SPI2,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA7_PO0,         SPI2,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_CLK_PY0,           SPI1,       SPI5,     UARTD,        ULPI),
+	PIN(ULPI_DIR_PY1,           SPI1,       SPI5,     UARTD,        ULPI),
+	PIN(ULPI_NXT_PY2,           SPI1,       SPI5,     UARTD,        ULPI),
+	PIN(ULPI_STP_PY3,           SPI1,       SPI5,     UARTD,        ULPI),
+	PIN(DAP3_FS_PP0,            I2S2,       SPI5,     DISPLAYA,     DISPLAYB),
+	PIN(DAP3_DIN_PP1,           I2S2,       SPI5,     DISPLAYA,     DISPLAYB),
+	PIN(DAP3_DOUT_PP2,          I2S2,       SPI5,     DISPLAYA,     DISPLAYB),
+	PIN(DAP3_SCLK_PP3,          I2S2,       SPI5,     DISPLAYA,     DISPLAYB),
+	PIN(PV0,                    USB,        RSVD2,    RSVD3,        RSVD4),
+	PIN(PV1,                    RSVD1,      RSVD2,    RSVD3,        RSVD4),
+	PIN(SDMMC1_CLK_PZ0,         SDMMC1,     CLK12,    RSVD3,        RSVD4),
+	PIN(SDMMC1_CMD_PZ1,         SDMMC1,     SPDIF,    SPI4,         UARTA),
+	PIN(SDMMC1_DAT3_PY4,        SDMMC1,     SPDIF,    SPI4,         UARTA),
+	PIN(SDMMC1_DAT2_PY5,        SDMMC1,     PWM0,     SPI4,         UARTA),
+	PIN(SDMMC1_DAT1_PY6,        SDMMC1,     PWM1,     SPI4,         UARTA),
+	PIN(SDMMC1_DAT0_PY7,        SDMMC1,     RSVD2,    SPI4,         UARTA),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3068 */
+	PIN(CLK2_OUT_PW5,           EXTPERIPH2, RSVD2,    RSVD3,        RSVD4),
+	PIN(CLK2_REQ_PCC5,          DAP,        RSVD2,    RSVD3,        RSVD4),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3110 */
+	PIN(HDMI_INT_PN7,           RSVD1,      RSVD2,    RSVD3,        RSVD4),
+	PIN(DDC_SCL_PV4,            I2C4,       RSVD2,    RSVD3,        RSVD4),
+	PIN(DDC_SDA_PV5,            I2C4,       RSVD2,    RSVD3,        RSVD4),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3164 */
+	PIN(UART2_RXD_PC3,          IRDA,       SPDIF,    UARTA,        SPI4),
+	PIN(UART2_TXD_PC2,          IRDA,       SPDIF,    UARTA,        SPI4),
+	PIN(UART2_RTS_N_PJ6,        UARTA,      UARTB,    RSVD3,        SPI4),
+	PIN(UART2_CTS_N_PJ5,        UARTA,      UARTB,    RSVD3,        SPI4),
+	PIN(UART3_TXD_PW6,          UARTC,      RSVD2,    RSVD3,        SPI4),
+	PIN(UART3_RXD_PW7,          UARTC,      RSVD2,    RSVD3,        SPI4),
+	PIN(UART3_CTS_N_PA1,        UARTC,      SDMMC1,   DTV,          SPI4),
+	PIN(UART3_RTS_N_PC0,        UARTC,      PWM0,     DTV,          DISPLAYA),
+	PIN(PU0,                    OWR,        UARTA,    RSVD3,        RSVD4),
+	PIN(PU1,                    RSVD1,      UARTA,    RSVD3,        RSVD4),
+	PIN(PU2,                    RSVD1,      UARTA,    RSVD3,        RSVD4),
+	PIN(PU3,                    PWM0,       UARTA,    DISPLAYA,     DISPLAYB),
+	PIN(PU4,                    PWM1,       UARTA,    DISPLAYA,     DISPLAYB),
+	PIN(PU5,                    PWM2,       UARTA,    DISPLAYA,     DISPLAYB),
+	PIN(PU6,                    PWM3,       UARTA,    USB,          DISPLAYB),
+	PIN(GEN1_I2C_SDA_PC5,       I2C1,       RSVD2,    RSVD3,        RSVD4),
+	PIN(GEN1_I2C_SCL_PC4,       I2C1,       RSVD2,    RSVD3,        RSVD4),
+	PIN(DAP4_FS_PP4,            I2S3,       RSVD2,    DTV,          RSVD4),
+	PIN(DAP4_DIN_PP5,           I2S3,       RSVD2,    RSVD3,        RSVD4),
+	PIN(DAP4_DOUT_PP6,          I2S3,       RSVD2,    DTV,          RSVD4),
+	PIN(DAP4_SCLK_PP7,          I2S3,       RSVD2,    RSVD3,        RSVD4),
+	PIN(CLK3_OUT_PEE0,          EXTPERIPH3, RSVD2,    RSVD3,        RSVD4),
+	PIN(CLK3_REQ_PEE1,          DEV3,       RSVD2,    RSVD3,        RSVD4),
+	PIN(GMI_WP_N_PC7,           RSVD1,      NAND,     GMI,          GMI_ALT),
+	PIN(GMI_IORDY_PI5,          SDMMC2,     RSVD2,    GMI,          TRACE),
+	PIN(GMI_WAIT_PI7,           SPI4,       NAND,     GMI,          DTV),
+	PIN(GMI_ADV_N_PK0,          RSVD1,      NAND,     GMI,          TRACE),
+	PIN(GMI_CLK_PK1,            SDMMC2,     NAND,     GMI,          TRACE),
+	PIN(GMI_CS0_N_PJ0,          RSVD1,      NAND,     GMI,          USB),
+	PIN(GMI_CS1_N_PJ2,          RSVD1,      NAND,     GMI,          SOC),
+	PIN(GMI_CS2_N_PK3,          SDMMC2,     NAND,     GMI,          TRACE),
+	PIN(GMI_CS3_N_PK4,          SDMMC2,     NAND,     GMI,          GMI_ALT),
+	PIN(GMI_CS4_N_PK2,          USB,        NAND,     GMI,          TRACE),
+	PIN(GMI_CS6_N_PI3,          NAND,       NAND_ALT, GMI,          SPI4),
+	PIN(GMI_CS7_N_PI6,          NAND,       NAND_ALT, GMI,          SDMMC2),
+	PIN(GMI_AD0_PG0,            RSVD1,      NAND,     GMI,          RSVD4),
+	PIN(GMI_AD1_PG1,            RSVD1,      NAND,     GMI,          RSVD4),
+	PIN(GMI_AD2_PG2,            RSVD1,      NAND,     GMI,          RSVD4),
+	PIN(GMI_AD3_PG3,            RSVD1,      NAND,     GMI,          RSVD4),
+	PIN(GMI_AD4_PG4,            RSVD1,      NAND,     GMI,          RSVD4),
+	PIN(GMI_AD5_PG5,            RSVD1,      NAND,     GMI,          SPI4),
+	PIN(GMI_AD6_PG6,            RSVD1,      NAND,     GMI,          SPI4),
+	PIN(GMI_AD7_PG7,            RSVD1,      NAND,     GMI,          SPI4),
+	PIN(GMI_AD8_PH0,            PWM0,       NAND,     GMI,          DTV),
+	PIN(GMI_AD9_PH1,            PWM1,       NAND,     GMI,          CLDVFS),
+	PIN(GMI_AD10_PH2,           PWM2,       NAND,     GMI,          CLDVFS),
+	PIN(GMI_AD11_PH3,           PWM3,       NAND,     GMI,          USB),
+	PIN(GMI_AD12_PH4,           SDMMC2,     NAND,     GMI,          RSVD4),
+	PIN(GMI_AD13_PH5,           SDMMC2,     NAND,     GMI,          RSVD4),
+	PIN(GMI_AD14_PH6,           SDMMC2,     NAND,     GMI,          DTV),
+	PIN(GMI_AD15_PH7,           SDMMC2,     NAND,     GMI,          DTV),
+	PIN(GMI_A16_PJ7,            UARTD,      TRACE,    GMI,          GMI_ALT),
+	PIN(GMI_A17_PB0,            UARTD,      RSVD2,    GMI,          TRACE),
+	PIN(GMI_A18_PB1,            UARTD,      RSVD2,    GMI,          TRACE),
+	PIN(GMI_A19_PK7,            UARTD,      SPI4,     GMI,          TRACE),
+	PIN(GMI_WR_N_PI0,           RSVD1,      NAND,     GMI,          SPI4),
+	PIN(GMI_OE_N_PI1,           RSVD1,      NAND,     GMI,          SOC),
+	PIN(GMI_DQS_P_PJ3,          SDMMC2,     NAND,     GMI,          TRACE),
+	PIN(GMI_RST_N_PI4,          NAND,       NAND_ALT, GMI,          RSVD4),
+	PIN(GEN2_I2C_SCL_PT5,       I2C2,       RSVD2,    GMI,          RSVD4),
+	PIN(GEN2_I2C_SDA_PT6,       I2C2,       RSVD2,    GMI,          RSVD4),
+	PIN(SDMMC4_CLK_PCC4,        SDMMC4,     RSVD2,    GMI,          RSVD4),
+	PIN(SDMMC4_CMD_PT7,         SDMMC4,     RSVD2,    GMI,          RSVD4),
+	PIN(SDMMC4_DAT0_PAA0,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT1_PAA1,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT2_PAA2,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT3_PAA3,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT4_PAA4,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT5_PAA5,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT6_PAA6,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT7_PAA7,       SDMMC4,     RSVD2,    GMI,          RSVD4),
+	PIN_RESERVED,
+	/* Offset 0x3284 */
+	PIN(CAM_MCLK_PCC0,          VI,         VI_ALT1,  VI_ALT3,      RSVD4),
+	PIN(PCC1,                   I2S4,       RSVD2,    RSVD3,        RSVD4),
+	PIN(PBB0,                   I2S4,       VI,       VI_ALT1,      VI_ALT3),
+	PIN(CAM_I2C_SCL_PBB1,       VGP1,       I2C3,     RSVD3,        RSVD4),
+	PIN(CAM_I2C_SDA_PBB2,       VGP2,       I2C3,     RSVD3,        RSVD4),
+	PIN(PBB3,                   VGP3,       DISPLAYA, DISPLAYB,     RSVD4),
+	PIN(PBB4,                   VGP4,       DISPLAYA, DISPLAYB,     RSVD4),
+	PIN(PBB5,                   VGP5,       DISPLAYA, DISPLAYB,     RSVD4),
+	PIN(PBB6,                   VGP6,       DISPLAYA, DISPLAYB,     RSVD4),
+	PIN(PBB7,                   I2S4,       RSVD2,    RSVD3,        RSVD4),
+	PIN(PCC2,                   I2S4,       RSVD2,    RSVD3,        RSVD4),
+	PIN(JTAG_RTCK,              RTCK,       RSVD2,    RSVD3,        RSVD4),
+	PIN(PWR_I2C_SCL_PZ6,        I2CPWR,     RSVD2,    RSVD3,        RSVD4),
+	PIN(PWR_I2C_SDA_PZ7,        I2CPWR,     RSVD2,    RSVD3,        RSVD4),
+	PIN(KB_ROW0_PR0,            KBC,        RSVD2,    RSVD3,        RSVD4),
+	PIN(KB_ROW1_PR1,            KBC,        RSVD2,    RSVD3,        RSVD4),
+	PIN(KB_ROW2_PR2,            KBC,        RSVD2,    RSVD3,        RSVD4),
+	PIN(KB_ROW3_PR3,            KBC,        DISPLAYA, RSVD3,        DISPLAYB),
+	PIN(KB_ROW4_PR4,            KBC,        DISPLAYA, SPI2,         DISPLAYB),
+	PIN(KB_ROW5_PR5,            KBC,        DISPLAYA, SPI2,         DISPLAYB),
+	PIN(KB_ROW6_PR6,            KBC,        DISPLAYA, DISPLAYA_ALT, DISPLAYB),
+	PIN(KB_ROW7_PR7,            KBC,        RSVD2,    CLDVFS,       UARTA),
+	PIN(KB_ROW8_PS0,            KBC,        RSVD2,    CLDVFS,       UARTA),
+	PIN(KB_ROW9_PS1,            KBC,        RSVD2,    RSVD3,        UARTA),
+	PIN(KB_ROW10_PS2,           KBC,        RSVD2,    RSVD3,        UARTA),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x32fc */
+	PIN(KB_COL0_PQ0,            KBC,        USB,      SPI2,         EMC_DLL),
+	PIN(KB_COL1_PQ1,            KBC,        RSVD2,    SPI2,         EMC_DLL),
+	PIN(KB_COL2_PQ2,            KBC,        RSVD2,    SPI2,         RSVD4),
+	PIN(KB_COL3_PQ3,            KBC,        DISPLAYA, PWM2,         UARTA),
+	PIN(KB_COL4_PQ4,            KBC,        OWR,      SDMMC3,       UARTA),
+	PIN(KB_COL5_PQ5,            KBC,        RSVD2,    SDMMC1,       RSVD4),
+	PIN(KB_COL6_PQ6,            KBC,        RSVD2,    SPI2,         RSVD4),
+	PIN(KB_COL7_PQ7,            KBC,        RSVD2,    SPI2,         RSVD4),
+	PIN(CLK_32K_OUT_PA0,        BLINK,      SOC,      RSVD3,        RSVD4),
+	PIN(SYS_CLK_REQ_PZ5,        SYSCLK,     RSVD2,    RSVD3,        RSVD4),
+	PIN(CORE_PWR_REQ,           PWRON,      RSVD2,    RSVD3,        RSVD4),
+	PIN(CPU_PWR_REQ,            CPU,        RSVD2,    RSVD3,        RSVD4),
+	PIN(PWR_INT_N,              PMI,        RSVD2,    RSVD3,        RSVD4),
+	PIN(CLK_32K_IN,             CLK,        RSVD2,    RSVD3,        RSVD4),
+	PIN(OWR,                    OWR,        RSVD2,    RSVD3,        RSVD4),
+	PIN(DAP1_FS_PN0,            I2S0,       HDA,      GMI,          RSVD4),
+	PIN(DAP1_DIN_PN1,           I2S0,       HDA,      GMI,          RSVD4),
+	PIN(DAP1_DOUT_PN2,          I2S0,       HDA,      GMI,          RSVD4),
+	PIN(DAP1_SCLK_PN3,          I2S0,       HDA,      GMI,          RSVD4),
+	PIN(CLK1_REQ_PEE2,          DAP,        DAP1,     RSVD3,        RSVD4),
+	PIN(CLK1_OUT_PW4,           EXTPERIPH1, DAP2,     RSVD3,        RSVD4),
+	PIN(SPDIF_IN_PK6,           SPDIF,      USB,      RSVD3,        RSVD4),
+	PIN(SPDIF_OUT_PK5,          SPDIF,      RSVD2,    RSVD3,        RSVD4),
+	PIN(DAP2_FS_PA2,            I2S1,       HDA,      RSVD3,        RSVD4),
+	PIN(DAP2_DIN_PA4,           I2S1,       HDA,      RSVD3,        RSVD4),
+	PIN(DAP2_DOUT_PA5,          I2S1,       HDA,      RSVD3,        RSVD4),
+	PIN(DAP2_SCLK_PA3,          I2S1,       HDA,      RSVD3,        RSVD4),
+	PIN(DVFS_PWM_PX0,           SPI6,       CLDVFS,   RSVD3,        RSVD4),
+	PIN(GPIO_X1_AUD_PX1,        SPI6,       RSVD2,    RSVD3,        RSVD4),
+	PIN(GPIO_X3_AUD_PX3,        SPI6,       SPI1,     RSVD3,        RSVD4),
+	PIN(DVFS_CLK_PX2,           SPI6,       CLDVFS,   RSVD3,        RSVD4),
+	PIN(GPIO_X4_AUD_PX4,        RSVD1,      SPI1,     SPI2,         DAP2),
+	PIN(GPIO_X5_AUD_PX5,        RSVD1,      SPI1,     SPI2,         RSVD4),
+	PIN(GPIO_X6_AUD_PX6,        SPI6,       SPI1,     SPI2,         RSVD4),
+	PIN(GPIO_X7_AUD_PX7,        RSVD1,      SPI1,     SPI2,         RSVD4),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3390 */
+	PIN(SDMMC3_CLK_PA6,         SDMMC3,     RSVD2,    RSVD3,        SPI3),
+	PIN(SDMMC3_CMD_PA7,         SDMMC3,     PWM3,     UARTA,        SPI3),
+	PIN(SDMMC3_DAT0_PB7,        SDMMC3,     RSVD2,    RSVD3,        SPI3),
+	PIN(SDMMC3_DAT1_PB6,        SDMMC3,     PWM2,     UARTA,        SPI3),
+	PIN(SDMMC3_DAT2_PB5,        SDMMC3,     PWM1,     DISPLAYA,     SPI3),
+	PIN(SDMMC3_DAT3_PB4,        SDMMC3,     PWM0,     DISPLAYB,     SPI3),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x33e0 */
+	PIN(HDMI_CEC_PEE3,          CEC,        SDMMC3,   RSVD3,        SOC),
+	PIN(SDMMC1_WP_N_PV3,        SDMMC1,     CLK12,    SPI4,         UARTA),
+	PIN(SDMMC3_CD_N_PV2,        SDMMC3,     OWR,      RSVD3,        RSVD4),
+	PIN(GPIO_W2_AUD_PW2,        SPI6,       RSVD2,    SPI2,         I2C1),
+	PIN(GPIO_W3_AUD_PW3,        SPI6,       SPI1,     SPI2,         I2C1),
+	PIN(USB_VBUS_EN0_PN4,       USB,        RSVD2,    RSVD3,        RSVD4),
+	PIN(USB_VBUS_EN1_PN5,       USB,        RSVD2,    RSVD3,        RSVD4),
+	PIN(SDMMC3_CLK_LB_IN_PEE5,  SDMMC3,     RSVD2,    RSVD3,        RSVD4),
+	PIN(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3,     RSVD2,    RSVD3,        RSVD4),
+	PIN(GMI_CLK_LB,             SDMMC2,     NAND,     GMI,          RSVD4),
+	PIN(RESET_OUT_N,            RSVD1,      RSVD2,    RSVD3,        RESET_OUT_N),
+};
+const struct pmux_pingrp_desc *tegra_soc_pingroups = tegra114_pingroups;
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/Kconfig b/roms/u-boot/arch/arm/mach-tegra/tegra124/Kconfig
new file mode 100644
index 000000000..fb016aa46
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/Kconfig
@@ -0,0 +1,58 @@
+if TEGRA124
+
+choice
+	prompt "Tegra124 board select"
+	optional
+
+config TARGET_APALIS_TK1
+	bool "Toradex Apalis TK1 module"
+	select ARCH_SUPPORT_PSCI
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+
+config TARGET_JETSON_TK1
+	bool "NVIDIA Tegra124 Jetson TK1 board"
+	select ARCH_SUPPORT_PSCI
+	select BOARD_LATE_INIT
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+
+config TARGET_CEI_TK1_SOM
+	bool "Colorado Engineering Inc Tegra124 TK1-som board"
+	select ARCH_SUPPORT_PSCI
+	select BOARD_LATE_INIT
+	select CPU_V7_HAS_NONSEC if !SPL_BUILD
+	select CPU_V7_HAS_VIRT if !SPL_BUILD
+	help
+	  The Colorado Engineering Tegra TK1-SOM is a very compact
+	  (51mmx58mm) board that is functionally almost the same as
+	  the Jetson TK1.  The main differences are in which balls on
+	  the SoC are assigned to which functions, and the PCIEe
+	  configuration.
+
+config TARGET_NYAN_BIG
+	bool "Google/NVIDIA Nyan-big Chromebook"
+	select BOARD_LATE_INIT
+	help
+	  Nyan Big is a Tegra124 clamshell board that is very similar
+	  to venice2, but it has a different panel, the sdcard CD and WP
+	  sense are flipped, and it has a different revision of the AS3722
+	  PMIC. The retail name is the Acer Chromebook 13 CB5-311-T7NN
+	  (13.3-inch HD, NVIDIA Tegra K1, 2GB).
+
+config TARGET_VENICE2
+	bool "NVIDIA Tegra124 Venice2"
+	select BOARD_LATE_INIT
+
+endchoice
+
+config SYS_SOC
+	default "tegra124"
+
+source "board/cei/cei-tk1-som/Kconfig"
+source "board/nvidia/jetson-tk1/Kconfig"
+source "board/nvidia/nyan-big/Kconfig"
+source "board/nvidia/venice2/Kconfig"
+source "board/toradex/apalis-tk1/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/Makefile b/roms/u-boot/arch/arm/mach-tegra/tegra124/Makefile
new file mode 100644
index 000000000..d275dafdc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/Makefile
@@ -0,0 +1,19 @@
+#
+# (C) Copyright 2013-2014
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-$(CONFIG_SPL_BUILD) += cpu.o
+
+obj-y	+= clock.o
+obj-y	+= funcmux.o
+obj-y	+= pinmux.o
+obj-y	+= pmc.o
+obj-y	+= xusb-padctl.o
+obj-y	+= ../xusb-padctl-common.o
+
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_ARMV7_NONSEC) += psci.o
+endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/clock.c b/roms/u-boot/arch/arm/mach-tegra/tegra124/clock.c
new file mode 100644
index 000000000..79e67f519
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/clock.c
@@ -0,0 +1,1184 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra124 Clock control functions */
+
+#include <common.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sysctr.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <linux/delay.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra124 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
+	CLOCK_TYPE_MCPA,	/* and so on */
+	CLOCK_TYPE_MCPT,
+	CLOCK_TYPE_PCM,
+	CLOCK_TYPE_PCMT,
+	CLOCK_TYPE_PDCT,
+	CLOCK_TYPE_ACPT,
+	CLOCK_TYPE_ASPTE,
+	CLOCK_TYPE_PMDACD2T,
+	CLOCK_TYPE_PCST,
+	CLOCK_TYPE_DP,
+
+	CLOCK_TYPE_PC2CC3M,
+	CLOCK_TYPE_PC2CC3S_T,
+	CLOCK_TYPE_PC2CC3M_T,
+	CLOCK_TYPE_PC2CC3M_T16,	/* PC2CC3M_T, but w/16-bit divisor (I2C) */
+	CLOCK_TYPE_MC2CC3P_A,
+	CLOCK_TYPE_M,
+	CLOCK_TYPE_MCPTM2C2C3,
+	CLOCK_TYPE_PC2CC3T_S,
+	CLOCK_TYPE_AC2CC3P_TS2,
+
+	CLOCK_TYPE_COUNT,
+	CLOCK_TYPE_NONE = -1,   /* invalid clock type */
+};
+
+enum {
+	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ *  The extra column in each clock source array is used to store the mask
+ *  bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(CLK_M),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(SFROM32KHZ),	CLK(PERIPH),	CLK(OSC),
+		CLK(EPCI),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(MEMORY),	CLK(DISPLAY),	CLK(AUDIO),
+		CLK(CGENERAL),	CLK(DISPLAY2),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_28},
+	/* CLOCK_TYPE_DP */
+	{ CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_28},
+
+	/* Additional clock types on Tegra114+ */
+	/* CLOCK_TYPE_PC2CC3M */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3S_T */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(SFROM32KHZ), CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3M_T */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_MC2CC3P_A */
+	{ CLK(MEMORY),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(PERIPH),	CLK(NONE),	CLK(AUDIO),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_M */
+	{ CLK(MEMORY),		CLK(NONE),	CLK(NONE),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	/* CLOCK_TYPE_MCPTM2C2C3 */
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(MEMORY2),	CLK(CGENERAL2),	CLK(CGENERAL3),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3T_S */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(OSC),	CLK(NONE),	CLK(SFROM32KHZ), CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_AC2CC3P_TS2 */
+	{ CLK(AUDIO),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(PERIPH),	CLK(NONE),	CLK(OSC),	CLK(SRC2),
+		MASK_BITS_31_29},
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+	/* 0x00 */
+	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PC2CC3M),
+	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_05h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC2,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SBC3,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x08 */
+	TYPE(PERIPHC_08h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_I2C5,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_0bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_0ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PMDACD2T),
+
+	/* 0x10 */
+	TYPE(PERIPHC_10h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_11h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_13h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_16h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_17h,	CLOCK_TYPE_NONE),
+
+	/* 0x18 */
+	TYPE(PERIPHC_18h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_1Bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_1Ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_HSI,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x20 */
+	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_21h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_22h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_HDMI,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_24h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_25h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPTM2C2C3),
+
+	/* 0x28 */
+	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_29h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI_SENSOR,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_2bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_2ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x30 */
+	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_I2S0,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_DTV,	CLOCK_TYPE_NONE),
+
+	/* 0x38 */
+	TYPE(PERIPHC_38h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_39h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_3ah,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_3bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_MSENC,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_TSEC,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_3eh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_OSC,	CLOCK_TYPE_NONE),
+
+	/* 0x40 */
+	TYPE(PERIPHC_40h,	CLOCK_TYPE_NONE),	/* start with 0x3b0 */
+	TYPE(PERIPHC_MSELECT,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_TSENSOR,	CLOCK_TYPE_PC2CC3T_S),
+	TYPE(PERIPHC_I2S3,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S4,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2C4,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_SBC5,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SBC6,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x48 */
+	TYPE(PERIPHC_AUDIO,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_49h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DAM0,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_DAM1,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_DAM2,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_ACTMON,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+	/* 0x50 */
+	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_52h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2CSLOW,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_SYS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_55h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_56h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_57h,	CLOCK_TYPE_NONE),
+
+	/* 0x58 */
+	TYPE(PERIPHC_58h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SOR,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_5ah,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_5bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SATAOOB,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SATA,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_HDA,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_5fh,	CLOCK_TYPE_NONE),
+
+	/* 0x60 */
+	TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_FS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_SS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILAB,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILCD,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILE,	CLOCK_TYPE_NONE),
+
+	/* 0x68 */
+	TYPE(PERIPHC_DSIA_LP,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DSIB_LP,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_ENTROPY,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DVFS_REF,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DVFS_SOC,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_ADX0,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_AMX0,	CLOCK_TYPE_NONE),
+
+	/* 0x70 */
+	TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SOC_THERM,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_72h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_73h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_74h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_75h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C6,	CLOCK_TYPE_PC2CC3M_T16),
+
+	/* 0x78 */
+	TYPE(PERIPHC_78h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_EMC_DLL,	CLOCK_TYPE_MCPTM2C2C3),
+	TYPE(PERIPHC_HDMI_AUDIO, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CLK72MHZ,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_ADX1,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_AMX1,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_VIC,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_7Fh,	CLOCK_TYPE_NONE),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
+ *	SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+	/* Low word: 31:0 */
+	NONE(CPU),
+	NONE(COP),
+	NONE(TRIGSYS),
+	NONE(ISPB),
+	NONE(RESERVED4),
+	NONE(TMR),
+	PERIPHC_UART1,
+	PERIPHC_UART2,	/* and vfir 0x68 */
+
+	/* 8 */
+	NONE(GPIO),
+	PERIPHC_SDMMC2,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_I2S1,
+	PERIPHC_I2C1,
+	NONE(RESERVED13),
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC4,
+
+	/* 16 */
+	NONE(TCW),
+	PERIPHC_PWM,
+	PERIPHC_I2S2,
+	NONE(RESERVED19),
+	PERIPHC_VI,
+	NONE(RESERVED21),
+	NONE(USBD),
+	NONE(ISP),
+
+	/* 24 */
+	NONE(RESERVED24),
+	NONE(RESERVED25),
+	PERIPHC_DISP2,
+	PERIPHC_DISP1,
+	PERIPHC_HOST1X,
+	NONE(VCP),
+	PERIPHC_I2S0,
+	NONE(CACHE2),
+
+	/* Middle word: 63:32 */
+	NONE(MEM),
+	NONE(AHBDMA),
+	NONE(APBDMA),
+	NONE(RESERVED35),
+	NONE(RESERVED36),
+	NONE(STAT_MON),
+	NONE(RESERVED38),
+	NONE(FUSE),
+
+	/* 40 */
+	NONE(KFUSE),
+	PERIPHC_SBC1,		/* SBCx = SPIx */
+	PERIPHC_NOR,
+	NONE(RESERVED43),
+	PERIPHC_SBC2,
+	NONE(XIO),
+	PERIPHC_SBC3,
+	PERIPHC_I2C5,
+
+	/* 48 */
+	NONE(DSI),
+	NONE(RESERVED49),
+	PERIPHC_HSI,
+	PERIPHC_HDMI,
+	NONE(CSI),
+	NONE(RESERVED53),
+	PERIPHC_I2C2,
+	PERIPHC_UART3,
+
+	/* 56 */
+	NONE(MIPI_CAL),
+	PERIPHC_EMC,
+	NONE(USB2),
+	NONE(USB3),
+	NONE(RESERVED60),
+	PERIPHC_VDE,
+	NONE(BSEA),
+	NONE(BSEV),
+
+	/* Upper word 95:64 */
+	NONE(RESERVED64),
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_I2C3,
+	PERIPHC_SBC4,
+	PERIPHC_SDMMC3,
+	NONE(PCIE),
+	PERIPHC_OWR,
+
+	/* 72 */
+	NONE(AFI),
+	PERIPHC_CSITE,
+	NONE(PCIEXCLK),
+	NONE(AVPUCQ),
+	NONE(LA),
+	NONE(TRACECLKIN),
+	NONE(SOC_THERM),
+	NONE(DTV),
+
+	/* 80 */
+	NONE(RESERVED80),
+	PERIPHC_I2CSLOW,
+	NONE(DSIB),
+	PERIPHC_TSEC,
+	NONE(RESERVED84),
+	NONE(RESERVED85),
+	NONE(RESERVED86),
+	NONE(EMUCIF),
+
+	/* 88 */
+	NONE(RESERVED88),
+	NONE(XUSB_HOST),
+	NONE(RESERVED90),
+	PERIPHC_MSENC,
+	NONE(RESERVED92),
+	NONE(RESERVED93),
+	NONE(RESERVED94),
+	NONE(XUSB_DEV),
+
+	/* V word: 31:0 */
+	NONE(CPUG),
+	NONE(CPULP),
+	NONE(V_RESERVED2),
+	PERIPHC_MSELECT,
+	NONE(V_RESERVED4),
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+
+	/* 104 */
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+	PERIPHC_AUDIO,
+	NONE(APBIF),
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+
+	/* 112 */
+	NONE(ATOMICS),
+	NONE(V_RESERVED17),
+	NONE(V_RESERVED18),
+	NONE(V_RESERVED19),
+	NONE(V_RESERVED20),
+	NONE(V_RESERVED21),
+	NONE(V_RESERVED22),
+	PERIPHC_ACTMON,
+
+	/* 120 */
+	PERIPHC_EXTPERIPH1,
+	NONE(EXTPERIPH2),
+	NONE(EXTPERIPH3),
+	NONE(OOB),
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+	NONE(TZRAM),
+	NONE(SE),
+
+	/* W word: 31:0 */
+	NONE(HDA2HDMICODEC),
+	NONE(SATACOLD),
+	NONE(W_RESERVED2),
+	NONE(W_RESERVED3),
+	NONE(W_RESERVED4),
+	NONE(W_RESERVED5),
+	NONE(W_RESERVED6),
+	NONE(W_RESERVED7),
+
+	/* 136 */
+	NONE(CEC),
+	NONE(W_RESERVED9),
+	NONE(W_RESERVED10),
+	NONE(W_RESERVED11),
+	NONE(W_RESERVED12),
+	NONE(W_RESERVED13),
+	NONE(XUSB_PADCTL),
+	NONE(W_RESERVED15),
+
+	/* 144 */
+	NONE(W_RESERVED16),
+	NONE(W_RESERVED17),
+	NONE(W_RESERVED18),
+	NONE(W_RESERVED19),
+	NONE(W_RESERVED20),
+	NONE(ENTROPY),
+	NONE(DDS),
+	NONE(W_RESERVED23),
+
+	/* 152 */
+	NONE(DP2),
+	NONE(AMX0),
+	NONE(ADX0),
+	NONE(DVFS),
+	NONE(XUSB_SS),
+	NONE(W_RESERVED29),
+	NONE(W_RESERVED30),
+	NONE(W_RESERVED31),
+
+	/* X word: 31:0 */
+	NONE(SPARE),
+	NONE(X_RESERVED1),
+	NONE(X_RESERVED2),
+	NONE(X_RESERVED3),
+	NONE(CAM_MCLK),
+	NONE(CAM_MCLK2),
+	PERIPHC_I2C6,
+	NONE(X_RESERVED7),
+
+	/* 168 */
+	NONE(X_RESERVED8),
+	NONE(X_RESERVED9),
+	NONE(X_RESERVED10),
+	NONE(VIM2_CLK),
+	NONE(X_RESERVED12),
+	NONE(X_RESERVED13),
+	NONE(EMC_DLL),
+	NONE(X_RESERVED15),
+
+	/* 176 */
+	NONE(HDMI_AUDIO),
+	NONE(CLK72MHZ),
+	NONE(VIC),
+	NONE(X_RESERVED19),
+	NONE(ADX1),
+	NONE(DPAUX),
+	PERIPHC_SOR,
+	NONE(X_RESERVED23),
+
+	/* 184 */
+	NONE(GPU),
+	NONE(AMX1),
+	NONE(X_RESERVED26),
+	NONE(X_RESERVED27),
+	NONE(X_RESERVED28),
+	NONE(X_RESERVED29),
+	NONE(X_RESERVED30),
+	NONE(X_RESERVED31),
+};
+
+/*
+ * PLL divider shift/mask tables for all PLL IDs.
+ */
+struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
+	/*
+	 * T124: same as T114, some deviations from T2x/T30. Adds PLLDP.
+	 * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.)
+	 *       If lock_ena or lock_det are >31, they're not used in that PLL.
+	 */
+
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 20, .p_mask = 0x0F,
+	  .lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 },	/* PLLC */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 0,  .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLM */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLP */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLA */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x01,
+	  .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLU */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLD */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 20, .p_mask = 0x0F,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 },	/* PLLX */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 9,  .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLE */
+	{ .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLS (RESERVED) */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 20,  .p_mask = 0xF,
+	  .lock_ena = 30, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 },	/* PLLDP */
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that Tegra30+ support 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+	if (reg & 1)				/* one of the newer freqs */
+		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
+
+	return reg >> 2;	/* Map to most common (T20) freqs */
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	enum periphc_internal_id internal_id;
+
+	/* Coresight is a special case */
+	if (periph_id == PERIPH_ID_CSI)
+		return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+	assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(internal_id != -1);
+	if (internal_id >= PERIPHC_X_FIRST) {
+		internal_id -= PERIPHC_X_FIRST;
+		return &clkrst->crc_clk_src_x[internal_id];
+	} else if (internal_id >= PERIPHC_VW_FIRST) {
+		internal_id -= PERIPHC_VW_FIRST;
+		return &clkrst->crc_clk_src_vw[internal_id];
+	} else {
+		return &clkrst->crc_clk_src[internal_id];
+	}
+}
+
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+			  int *divider_bits, int *type)
+{
+	enum periphc_internal_id internal_id;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return -1;
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	if (!periphc_internal_id_isvalid(internal_id))
+		return -1;
+
+	*type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(*type))
+		return -1;
+
+	*mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+	if (*type == CLOCK_TYPE_PC2CC3M_T16)
+		*divider_bits = 16;
+	else
+		*divider_bits = 8;
+
+	return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+	enum periphc_internal_id internal_id;
+	int type;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return CLOCK_ID_NONE;
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	if (!periphc_internal_id_isvalid(internal_id))
+		return CLOCK_ID_NONE;
+
+	type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(type))
+		return CLOCK_ID_NONE;
+
+	return clock_source[type][source];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id	peripheral to start
+ * @param source	PLL id of required parent clock
+ * @param mux_bits	Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+	enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+	enum clock_type_id type;
+	int mux, err;
+
+	err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+	assert(!err);
+
+	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+		if (clock_source[type][mux] == parent)
+			return mux;
+
+	/* if we get here, either us or the caller has made a mistake */
+	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+	       parent);
+	return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *clk;
+	u32 reg;
+
+	/* Enable/disable the clock to this peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+		clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+	else if ((int)periph_id < PERIPH_ID_X_FIRST)
+		clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+	else
+		clk = &clkrst->crc_clk_out_enb_x;
+	reg = readl(clk);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *reset;
+	u32 reg;
+
+	/* Enable/disable reset to the peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if (periph_id < PERIPH_ID_VW_FIRST)
+		reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+	else if ((int)periph_id < PERIPH_ID_X_FIRST)
+		reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+	else
+		reset = &clkrst->crc_rst_devices_x;
+	reg = readl(reset);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, reset);
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id    Clock ID according to tegra124 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+	if (clk_id > PERIPH_ID_COUNT)
+		return PERIPH_ID_NONE;
+
+	switch (clk_id) {
+	case PERIPH_ID_RESERVED4:
+	case PERIPH_ID_RESERVED25:
+	case PERIPH_ID_RESERVED35:
+	case PERIPH_ID_RESERVED36:
+	case PERIPH_ID_RESERVED38:
+	case PERIPH_ID_RESERVED43:
+	case PERIPH_ID_RESERVED49:
+	case PERIPH_ID_RESERVED53:
+	case PERIPH_ID_RESERVED64:
+	case PERIPH_ID_RESERVED84:
+	case PERIPH_ID_RESERVED85:
+	case PERIPH_ID_RESERVED86:
+	case PERIPH_ID_RESERVED88:
+	case PERIPH_ID_RESERVED90:
+	case PERIPH_ID_RESERVED92:
+	case PERIPH_ID_RESERVED93:
+	case PERIPH_ID_RESERVED94:
+	case PERIPH_ID_V_RESERVED2:
+	case PERIPH_ID_V_RESERVED4:
+	case PERIPH_ID_V_RESERVED17:
+	case PERIPH_ID_V_RESERVED18:
+	case PERIPH_ID_V_RESERVED19:
+	case PERIPH_ID_V_RESERVED20:
+	case PERIPH_ID_V_RESERVED21:
+	case PERIPH_ID_V_RESERVED22:
+	case PERIPH_ID_W_RESERVED2:
+	case PERIPH_ID_W_RESERVED3:
+	case PERIPH_ID_W_RESERVED4:
+	case PERIPH_ID_W_RESERVED5:
+	case PERIPH_ID_W_RESERVED6:
+	case PERIPH_ID_W_RESERVED7:
+	case PERIPH_ID_W_RESERVED9:
+	case PERIPH_ID_W_RESERVED10:
+	case PERIPH_ID_W_RESERVED11:
+	case PERIPH_ID_W_RESERVED12:
+	case PERIPH_ID_W_RESERVED13:
+	case PERIPH_ID_W_RESERVED15:
+	case PERIPH_ID_W_RESERVED16:
+	case PERIPH_ID_W_RESERVED17:
+	case PERIPH_ID_W_RESERVED18:
+	case PERIPH_ID_W_RESERVED19:
+	case PERIPH_ID_W_RESERVED20:
+	case PERIPH_ID_W_RESERVED23:
+	case PERIPH_ID_W_RESERVED29:
+	case PERIPH_ID_W_RESERVED30:
+	case PERIPH_ID_W_RESERVED31:
+		return PERIPH_ID_NONE;
+	default:
+		return clk_id;
+	}
+}
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
+
+void clock_early_init(void)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct clk_pll_info *pllinfo;
+	u32 data;
+
+	tegra30_set_up_pllp();
+
+	/* clear IDDQ before accessing any other PLLC registers */
+	pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL];
+	clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ);
+	udelay(2);
+
+	/*
+	 * PLLC output frequency set to 600Mhz
+	 * PLLD output frequency set to 925Mhz
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+
+	/* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */
+	writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]);
+
+	/* PLLC_MISC: Set LOCK_ENABLE */
+	pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL];
+	setbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, (1 << pllinfo->lock_ena));
+	udelay(2);
+
+	/* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1, and enable lock */
+	pllinfo = &tegra_pll_info_table[CLOCK_ID_DISPLAY];
+	data = (12 << pllinfo->kcp_shift) | (1 << pllinfo->kvco_shift);
+	data |= (1 << PLLD_CLKENABLE) | (1 << pllinfo->lock_ena);
+	writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
+	udelay(2);
+}
+
+/*
+ * clock_early_init_done - Check if clock_early_init() has been called
+ *
+ * Check a register that we set up to see if clock_early_init() has already
+ * been called.
+ *
+ * @return true if clock_early_init() was called, false if not
+ */
+bool clock_early_init_done(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 val;
+
+	val = readl(&clkrst->crc_sclk_brst_pol);
+
+	return val == 0x20002222;
+}
+
+void arch_timer_init(void)
+{
+	struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
+	u32 freq, val;
+
+	freq = clock_get_rate(CLOCK_ID_CLK_M);
+	debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq);
+
+	/* ARM CNTFRQ */
+	asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
+
+	/* Only Tegra114+ has the System Counter regs */
+	debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq);
+	writel(freq, &sysctr->cntfid0);
+
+	val = readl(&sysctr->cntcr);
+	val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG;
+	writel(val, &sysctr->cntcr);
+	debug("%s: TSC CNTCR = 0x%08X\n", __func__, val);
+}
+
+#define PLLE_SS_CNTL 0x68
+#define  PLLE_SS_CNTL_SSCINCINTR(x) (((x) & 0x3f) << 24)
+#define  PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
+#define  PLLE_SS_CNTL_SSCINVERT (1 << 15)
+#define  PLLE_SS_CNTL_SSCCENTER (1 << 14)
+#define  PLLE_SS_CNTL_SSCBYP (1 << 12)
+#define  PLLE_SS_CNTL_INTERP_RESET (1 << 11)
+#define  PLLE_SS_CNTL_BYPASS_SS (1 << 10)
+#define  PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
+
+#define PLLE_BASE 0x0e8
+#define  PLLE_BASE_ENABLE (1 << 30)
+#define  PLLE_BASE_LOCK_OVERRIDE (1 << 29)
+#define  PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24)
+#define  PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
+#define  PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
+
+#define PLLE_MISC 0x0ec
+#define  PLLE_MISC_IDDQ_SWCTL (1 << 14)
+#define  PLLE_MISC_IDDQ_OVERRIDE (1 << 13)
+#define  PLLE_MISC_LOCK_ENABLE (1 << 9)
+#define  PLLE_MISC_PTS (1 << 8)
+#define  PLLE_MISC_VREG_BG_CTRL(x) (((x) & 0x3) << 4)
+#define  PLLE_MISC_VREG_CTRL(x) (((x) & 0x3) << 2)
+
+#define PLLE_AUX 0x48c
+#define  PLLE_AUX_SEQ_ENABLE (1 << 24)
+#define  PLLE_AUX_ENABLE_SWCTL (1 << 4)
+
+int tegra_plle_enable(void)
+{
+	unsigned int m = 1, n = 200, cpcon = 13;
+	u32 value;
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value &= ~PLLE_BASE_LOCK_OVERRIDE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX);
+	value |= PLLE_AUX_ENABLE_SWCTL;
+	value &= ~PLLE_AUX_SEQ_ENABLE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX);
+
+	udelay(1);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	value |= PLLE_MISC_IDDQ_SWCTL;
+	value &= ~PLLE_MISC_IDDQ_OVERRIDE;
+	value |= PLLE_MISC_LOCK_ENABLE;
+	value |= PLLE_MISC_PTS;
+	value |= PLLE_MISC_VREG_BG_CTRL(3);
+	value |= PLLE_MISC_VREG_CTRL(2);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+	udelay(5);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET |
+		 PLLE_SS_CNTL_BYPASS_SS;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value &= ~PLLE_BASE_PLDIV_CML(0xf);
+	value &= ~PLLE_BASE_NDIV(0xff);
+	value &= ~PLLE_BASE_MDIV(0xff);
+	value |= PLLE_BASE_PLDIV_CML(cpcon);
+	value |= PLLE_BASE_NDIV(n);
+	value |= PLLE_BASE_MDIV(m);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	udelay(1);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value |= PLLE_BASE_ENABLE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	/* wait for lock */
+	udelay(300);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value &= ~PLLE_SS_CNTL_SSCINVERT;
+	value &= ~PLLE_SS_CNTL_SSCCENTER;
+
+	value &= ~PLLE_SS_CNTL_SSCINCINTR(0x3f);
+	value &= ~PLLE_SS_CNTL_SSCINC(0xff);
+	value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff);
+
+	value |= PLLE_SS_CNTL_SSCINCINTR(0x20);
+	value |= PLLE_SS_CNTL_SSCINC(0x01);
+	value |= PLLE_SS_CNTL_SSCMAX(0x25);
+
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value &= ~PLLE_SS_CNTL_SSCBYP;
+	value &= ~PLLE_SS_CNTL_BYPASS_SS;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	udelay(1);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value &= ~PLLE_SS_CNTL_INTERP_RESET;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	udelay(1);
+
+	return 0;
+}
+
+void clock_sor_enable_edp_clock(void)
+{
+	u32 *reg;
+
+	/* uses PLLP, has a non-standard bit layout. */
+	reg = get_periph_source_reg(PERIPH_ID_SOR0);
+	setbits_le32(reg, SOR0_CLK_SEL0);
+}
+
+u32 clock_set_display_rate(u32 frequency)
+{
+	/**
+	 * plld (fo) = vco >> p, where 500MHz < vco < 1000MHz
+	 *           = (cf * n) >> p, where 1MHz < cf < 6MHz
+	 *           = ((ref / m) * n) >> p
+	 *
+	 * Iterate the possible values of p (3 bits, 2^7) to find out a minimum
+	 * safe vco, then find best (m, n). since m has only 5 bits, we can
+	 * iterate all possible values.  Note Tegra 124 supports 11 bits for n,
+	 * but our pll_fields has only 10 bits for n.
+	 *
+	 * Note values undershoot or overshoot target output frequency may not
+	 * work if the values are not in "safe" range by panel specification.
+	 */
+	u32 ref = clock_get_rate(CLOCK_ID_OSC);
+	u32 divm, divn, divp, cpcon;
+	u32 cf, vco, rounded_rate = frequency;
+	u32 diff, best_diff, best_m = 0, best_n = 0, best_p;
+	const u32 max_m = 1 << 5, max_n = 1 << 10, max_p = 1 << 3,
+		  mhz = 1000 * 1000, min_vco = 500 * mhz, max_vco = 1000 * mhz,
+		  min_cf = 1 * mhz, max_cf = 6 * mhz;
+	int mux_bits, divider_bits, source;
+
+	for (divp = 0, vco = frequency; vco < min_vco && divp < max_p; divp++)
+		vco <<= 1;
+
+	if (vco < min_vco || vco > max_vco) {
+		printf("%s: Cannot find out a supported VCO for Frequency (%u)\n",
+		       __func__, frequency);
+		return 0;
+	}
+
+	best_p = divp;
+	best_diff = vco;
+
+	for (divm = 1; divm < max_m && best_diff; divm++) {
+		cf = ref / divm;
+		if (cf < min_cf)
+			break;
+		if (cf > max_cf)
+			continue;
+
+		divn = vco / cf;
+		if (divn >= max_n)
+			continue;
+
+		diff = vco - divn * cf;
+		if (divn + 1 < max_n && diff > cf / 2) {
+			divn++;
+			diff = cf - diff;
+		}
+
+		if (diff >= best_diff)
+			continue;
+
+		best_diff = diff;
+		best_m = divm;
+		best_n = divn;
+	}
+
+	if (best_n < 50)
+		cpcon = 2;
+	else if (best_n < 300)
+		cpcon = 3;
+	else if (best_n < 600)
+		cpcon = 8;
+	else
+		cpcon = 12;
+
+	if (best_diff) {
+		printf("%s: Failed to match output frequency %u, best difference is %u\n",
+		       __func__, frequency, best_diff);
+		rounded_rate = (ref / best_m * best_n) >> best_p;
+	}
+
+	debug("%s: PLLD=%u ref=%u, m/n/p/cpcon=%u/%u/%u/%u\n",
+	      __func__, rounded_rate, ref, best_m, best_n, best_p, cpcon);
+
+	source = get_periph_clock_source(PERIPH_ID_DISP1, CLOCK_ID_DISPLAY,
+					 &mux_bits, &divider_bits);
+	clock_ll_set_source_bits(PERIPH_ID_DISP1, mux_bits, source);
+	clock_set_rate(CLOCK_ID_DISPLAY, best_n, best_m, best_p, cpcon);
+
+	return rounded_rate;
+}
+
+void clock_set_up_plldp(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 value;
+
+	value = PLLDP_SS_CFG_UNDOCUMENTED | PLLDP_SS_CFG_DITHER;
+	writel(value | PLLDP_SS_CFG_CLAMP, &clkrst->crc_plldp_ss_cfg);
+	clock_start_pll(CLOCK_ID_DP, 1, 90, 3, 0, 0);
+	writel(value, &clkrst->crc_plldp_ss_cfg);
+}
+
+struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+	if (clkid == CLOCK_ID_DP)
+		return &clkrst->plldp;
+
+	return NULL;
+}
+
+struct periph_clk_init periph_clk_init_table[] = {
+	{ PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC5, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC6, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_DISP1, CLOCK_ID_CGENERAL },
+	{ PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
+	{ PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C5, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C6, CLOCK_ID_PERIPH },
+	{ -1, },
+};
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/cpu.c b/roms/u-boot/arch/arm/mach-tegra/tegra124/cpu.c
new file mode 100644
index 000000000..d5f2683b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/cpu.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/ahb.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/ap.h>
+#include <linux/delay.h>
+#include "../cpu.h"
+
+/* Tegra124-specific CPU init code */
+
+static void enable_cpu_power_rail(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	debug("%s entry\n", __func__);
+
+	/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
+	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
+	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
+
+	pmic_enable_cpu_vdd();
+
+	/*
+	 * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
+	 * set it for 5ms as per SysEng (102MHz*5ms = 510000 (7C830h).
+	 */
+	writel(0x7C830, &pmc->pmc_cpupwrgood_timer);
+
+	/* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
+	clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
+	setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
+}
+
+static void enable_cpu_clocks(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_XCPU];
+	u32 reg;
+
+	debug("%s entry\n", __func__);
+
+	/* Wait for PLL-X to lock */
+	do {
+		reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+		debug("%s: PLLX base = 0x%08X\n", __func__, reg);
+	} while ((reg & (1 << pllinfo->lock_det)) == 0);
+
+	debug("%s: PLLX locked, delay for stable clocks\n", __func__);
+	/* Wait until all clocks are stable */
+	udelay(PLL_STABILIZATION_DELAY);
+
+	debug("%s: Setting CCLK_BURST and DIVIDER\n", __func__);
+	writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+	writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
+
+	debug("%s: Enabling clock to all CPUs\n", __func__);
+	/* Enable the clock to all CPUs */
+	reg = CLR_CPU3_CLK_STP | CLR_CPU2_CLK_STP | CLR_CPU1_CLK_STP |
+		CLR_CPU0_CLK_STP;
+	writel(reg, &clkrst->crc_clk_cpu_cmplx_clr);
+
+	debug("%s: Enabling main CPU complex clocks\n", __func__);
+	/* Always enable the main CPU complex clocks */
+	clock_enable(PERIPH_ID_CPU);
+	clock_enable(PERIPH_ID_CPULP);
+	clock_enable(PERIPH_ID_CPUG);
+
+	debug("%s: Done\n", __func__);
+}
+
+static void remove_cpu_resets(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	debug("%s entry\n", __func__);
+
+	/* Take the slow and fast partitions out of reset */
+	reg = CLR_NONCPURESET;
+	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
+	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
+
+	/* Clear the SW-controlled reset of the slow cluster */
+	reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
+		CLR_L2RESET | CLR_PRESETDBG;
+	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
+
+	/* Clear the SW-controlled reset of the fast cluster */
+	reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
+		CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 |
+		CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 |
+		CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3 |
+		CLR_L2RESET | CLR_PRESETDBG;
+	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
+}
+
+static void tegra124_ram_repair(void)
+{
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+	u32 ram_repair_timeout; /*usec*/
+	u32 val;
+
+	/*
+	 * Request the Flow Controller perform RAM repair whenever it turns on
+	 * a power rail that requires RAM repair.
+	 */
+	clrbits_le32(&flow->ram_repair, RAM_REPAIR_BYPASS_EN);
+
+	/* Request SW trigerred RAM repair by setting req  bit */
+	/* cluster 0 */
+	setbits_le32(&flow->ram_repair, RAM_REPAIR_REQ);
+	/* Wait for completion (status == 0) */
+	ram_repair_timeout = 500;
+	do {
+		udelay(1);
+		val = readl(&flow->ram_repair);
+	} while (!(val & RAM_REPAIR_STS) && ram_repair_timeout--);
+	if (!ram_repair_timeout)
+		debug("Ram Repair cluster0 failed\n");
+
+	/* cluster 1 */
+	setbits_le32(&flow->ram_repair_cluster1, RAM_REPAIR_REQ);
+	/* Wait for completion (status == 0) */
+	ram_repair_timeout = 500;
+	do {
+		udelay(1);
+		val = readl(&flow->ram_repair_cluster1);
+	} while (!(val & RAM_REPAIR_STS) && ram_repair_timeout--);
+
+	if (!ram_repair_timeout)
+		debug("Ram Repair cluster1 failed\n");
+}
+
+/**
+ * Tegra124 requires some special clock initialization, including setting up
+ * the DVC I2C, turning on MSELECT and selecting the G CPU cluster
+ */
+void tegra124_init_clocks(void)
+{
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 val;
+
+	debug("%s entry\n", __func__);
+
+	/* Set active CPU cluster to G */
+	clrbits_le32(&flow->cluster_control, 1);
+
+	/* Change the oscillator drive strength */
+	val = readl(&clkrst->crc_osc_ctrl);
+	val &= ~OSC_XOFS_MASK;
+	val |= (OSC_DRIVE_STRENGTH << OSC_XOFS_SHIFT);
+	writel(val, &clkrst->crc_osc_ctrl);
+
+	/* Update same value in PMC_OSC_EDPD_OVER XOFS field for warmboot */
+	val = readl(&pmc->pmc_osc_edpd_over);
+	val &= ~PMC_XOFS_MASK;
+	val |= (OSC_DRIVE_STRENGTH << PMC_XOFS_SHIFT);
+	writel(val, &pmc->pmc_osc_edpd_over);
+
+	/* Set HOLD_CKE_LOW_EN to 1 */
+	setbits_le32(&pmc->pmc_cntrl2, HOLD_CKE_LOW_EN);
+
+	debug("Setting up PLLX\n");
+	init_pllx();
+
+	val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
+	writel(val, &clkrst->crc_clk_sys_rate);
+
+	/* Enable clocks to required peripherals. TBD - minimize this list */
+	debug("Enabling clocks\n");
+
+	clock_set_enable(PERIPH_ID_CACHE2, 1);
+	clock_set_enable(PERIPH_ID_GPIO, 1);
+	clock_set_enable(PERIPH_ID_TMR, 1);
+	clock_set_enable(PERIPH_ID_CPU, 1);
+	clock_set_enable(PERIPH_ID_EMC, 1);
+	clock_set_enable(PERIPH_ID_I2C5, 1);
+	clock_set_enable(PERIPH_ID_APBDMA, 1);
+	clock_set_enable(PERIPH_ID_MEM, 1);
+	clock_set_enable(PERIPH_ID_CORESIGHT, 1);
+	clock_set_enable(PERIPH_ID_MSELECT, 1);
+	clock_set_enable(PERIPH_ID_DVFS, 1);
+
+	/*
+	 * Set MSELECT clock source as PLLP (00), and ask for a clock
+	 * divider that would set the MSELECT clock at 102MHz for a
+	 * PLLP base of 408MHz.
+	 */
+	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
+				    CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
+
+	/* Give clock time to stabilize */
+	udelay(IO_STABILIZATION_DELAY);
+
+	/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
+	clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
+
+	/* Give clock time to stabilize */
+	udelay(IO_STABILIZATION_DELAY);
+
+	/* Take required peripherals out of reset */
+	debug("Taking periphs out of reset\n");
+	reset_set_enable(PERIPH_ID_CACHE2, 0);
+	reset_set_enable(PERIPH_ID_GPIO, 0);
+	reset_set_enable(PERIPH_ID_TMR, 0);
+	reset_set_enable(PERIPH_ID_COP, 0);
+	reset_set_enable(PERIPH_ID_EMC, 0);
+	reset_set_enable(PERIPH_ID_I2C5, 0);
+	reset_set_enable(PERIPH_ID_APBDMA, 0);
+	reset_set_enable(PERIPH_ID_MEM, 0);
+	reset_set_enable(PERIPH_ID_CORESIGHT, 0);
+	reset_set_enable(PERIPH_ID_MSELECT, 0);
+	reset_set_enable(PERIPH_ID_DVFS, 0);
+
+	debug("%s exit\n", __func__);
+}
+
+static bool is_partition_powered(u32 partid)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	u32 reg;
+
+	/* Get power gate status */
+	reg = readl(&pmc->pmc_pwrgate_status);
+	return !!(reg & (1 << partid));
+}
+
+static void unpower_partition(u32 partid)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	debug("%s: part ID = %08X\n", __func__, partid);
+	/* Is the partition on? */
+	if (is_partition_powered(partid)) {
+		/* Yes, toggle the partition power state (ON -> OFF) */
+		debug("power_partition, toggling state\n");
+		writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
+
+		/* Wait for the power to come down */
+		while (is_partition_powered(partid))
+			;
+
+		/* Give I/O signals time to stabilize */
+		udelay(IO_STABILIZATION_DELAY);
+	}
+}
+
+void unpower_cpus(void)
+{
+	debug("%s entry: G cluster\n", __func__);
+
+	/* Power down the fast cluster rail partition */
+	debug("%s: CRAIL\n", __func__);
+	unpower_partition(CRAIL);
+
+	/* Power down the fast cluster non-CPU partition */
+	debug("%s: C0NC\n", __func__);
+	unpower_partition(C0NC);
+
+	/* Power down the fast cluster CPU0 partition */
+	debug("%s: CE0\n", __func__);
+	unpower_partition(CE0);
+
+	debug("%s: done\n", __func__);
+}
+
+static void power_partition(u32 partid)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	debug("%s: part ID = %08X\n", __func__, partid);
+	/* Is the partition already on? */
+	if (!is_partition_powered(partid)) {
+		/* No, toggle the partition power state (OFF -> ON) */
+		debug("power_partition, toggling state\n");
+		writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
+
+		/* Wait for the power to come up */
+		while (!is_partition_powered(partid))
+			;
+
+		/* Give I/O signals time to stabilize */
+		udelay(IO_STABILIZATION_DELAY);
+	}
+}
+
+void powerup_cpus(void)
+{
+	/* We boot to the fast cluster */
+	debug("%s entry: G cluster\n", __func__);
+
+	/* Power up the fast cluster rail partition */
+	debug("%s: CRAIL\n", __func__);
+	power_partition(CRAIL);
+
+	/* Power up the fast cluster non-CPU partition */
+	debug("%s: C0NC\n", __func__);
+	power_partition(C0NC);
+
+	/* Power up the fast cluster CPU0 partition */
+	debug("%s: CE0\n", __func__);
+	power_partition(CE0);
+
+	debug("%s: done\n", __func__);
+}
+
+void start_cpu(u32 reset_vector)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+	debug("%s entry, reset_vector = %x\n", __func__, reset_vector);
+
+	/*
+	 * High power clusters are on after software reset,
+	 * it may interfere with tegra124_ram_repair.
+	 * unpower them.
+	 */
+	unpower_cpus();
+	tegra124_init_clocks();
+
+	/* Set power-gating timer multiplier */
+	writel((MULT_8 << TIMER_MULT_SHIFT) | (MULT_8 << TIMER_MULT_CPU_SHIFT),
+	       &pmc->pmc_pwrgate_timer_mult);
+
+	enable_cpu_power_rail();
+	powerup_cpus();
+	tegra124_ram_repair();
+	enable_cpu_clocks();
+	clock_enable_coresight(1);
+	writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+	remove_cpu_resets();
+	debug("%s exit, should continue @ reset_vector\n", __func__);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/funcmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra124/funcmux.c
new file mode 100644
index 000000000..e7ad85fde
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/funcmux.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra124 high-level function multiplexing */
+
+#include <common.h>
+#include <log.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+	int bad_config = config != FUNCMUX_DEFAULT;
+
+	switch (id) {
+	case PERIPH_ID_UART4:
+		switch (config) {
+		case FUNCMUX_UART4_GPIO: /* TXD,RXD,CTS,RTS */
+			pinmux_set_func(PMUX_PINGRP_PJ7, PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_PB0, PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_PB1, PMUX_FUNC_UARTD);
+			pinmux_set_func(PMUX_PINGRP_PK7, PMUX_FUNC_UARTD);
+
+			pinmux_set_io(PMUX_PINGRP_PJ7, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PMUX_PINGRP_PB0, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_PB1, PMUX_PIN_INPUT);
+			pinmux_set_io(PMUX_PINGRP_PK7, PMUX_PIN_OUTPUT);
+
+			pinmux_tristate_disable(PMUX_PINGRP_PJ7);
+			pinmux_tristate_disable(PMUX_PINGRP_PB0);
+			pinmux_tristate_disable(PMUX_PINGRP_PB1);
+			pinmux_tristate_disable(PMUX_PINGRP_PK7);
+			break;
+		}
+		break;
+
+	case PERIPH_ID_UART1:
+		switch (config) {
+		case FUNCMUX_UART1_KBC:
+			pinmux_set_func(PMUX_PINGRP_KB_ROW9_PS1,
+					PMUX_FUNC_UARTA);
+			pinmux_set_func(PMUX_PINGRP_KB_ROW10_PS2,
+					PMUX_FUNC_UARTA);
+
+			pinmux_set_io(PMUX_PINGRP_KB_ROW9_PS1, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PMUX_PINGRP_KB_ROW10_PS2, PMUX_PIN_INPUT);
+
+			pinmux_tristate_disable(PMUX_PINGRP_KB_ROW9_PS1);
+			pinmux_tristate_disable(PMUX_PINGRP_KB_ROW10_PS2);
+			break;
+		}
+		break;
+
+	/* Add other periph IDs here as needed */
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/pinmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra124/pinmux.c
new file mode 100644
index 000000000..261ce64b2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/pinmux.c
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+
+#define PIN(pin, f0, f1, f2, f3)	\
+	{				\
+		.funcs = {		\
+			PMUX_FUNC_##f0,	\
+			PMUX_FUNC_##f1,	\
+			PMUX_FUNC_##f2,	\
+			PMUX_FUNC_##f3,	\
+		},			\
+	}
+
+#define PIN_RESERVED {}
+
+static const struct pmux_pingrp_desc tegra124_pingroups[] = {
+	/*  pin,                    f0,         f1,       f2,           f3 */
+	/* Offset 0x3000 */
+	PIN(ULPI_DATA0_PO1,         SPI3,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA1_PO2,         SPI3,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA2_PO3,         SPI3,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA3_PO4,         SPI3,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA4_PO5,         SPI2,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA5_PO6,         SPI2,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA6_PO7,         SPI2,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_DATA7_PO0,         SPI2,       HSI,      UARTA,        ULPI),
+	PIN(ULPI_CLK_PY0,           SPI1,       SPI5,     UARTD,        ULPI),
+	PIN(ULPI_DIR_PY1,           SPI1,       SPI5,     UARTD,        ULPI),
+	PIN(ULPI_NXT_PY2,           SPI1,       SPI5,     UARTD,        ULPI),
+	PIN(ULPI_STP_PY3,           SPI1,       SPI5,     UARTD,        ULPI),
+	PIN(DAP3_FS_PP0,            I2S2,       SPI5,     DISPLAYA,     DISPLAYB),
+	PIN(DAP3_DIN_PP1,           I2S2,       SPI5,     DISPLAYA,     DISPLAYB),
+	PIN(DAP3_DOUT_PP2,          I2S2,       SPI5,     DISPLAYA,     RSVD4),
+	PIN(DAP3_SCLK_PP3,          I2S2,       SPI5,     RSVD3,        DISPLAYB),
+	PIN(PV0,                    RSVD1,      RSVD2,    RSVD3,        RSVD4),
+	PIN(PV1,                    RSVD1,      RSVD2,    RSVD3,        RSVD4),
+	PIN(SDMMC1_CLK_PZ0,         SDMMC1,     CLK12,    RSVD3,        RSVD4),
+	PIN(SDMMC1_CMD_PZ1,         SDMMC1,     SPDIF,    SPI4,         UARTA),
+	PIN(SDMMC1_DAT3_PY4,        SDMMC1,     SPDIF,    SPI4,         UARTA),
+	PIN(SDMMC1_DAT2_PY5,        SDMMC1,     PWM0,     SPI4,         UARTA),
+	PIN(SDMMC1_DAT1_PY6,        SDMMC1,     PWM1,     SPI4,         UARTA),
+	PIN(SDMMC1_DAT0_PY7,        SDMMC1,     RSVD2,    SPI4,         UARTA),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3068 */
+	PIN(CLK2_OUT_PW5,           EXTPERIPH2, RSVD2,    RSVD3,        RSVD4),
+	PIN(CLK2_REQ_PCC5,          DAP,        RSVD2,    RSVD3,        RSVD4),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3110 */
+	PIN(HDMI_INT_PN7,           RSVD1,      RSVD2,    RSVD3,        RSVD4),
+	PIN(DDC_SCL_PV4,            I2C4,       RSVD2,    RSVD3,        RSVD4),
+	PIN(DDC_SDA_PV5,            I2C4,       RSVD2,    RSVD3,        RSVD4),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3164 */
+	PIN(UART2_RXD_PC3,          IRDA,       SPDIF,    UARTA,        SPI4),
+	PIN(UART2_TXD_PC2,          IRDA,       SPDIF,    UARTA,        SPI4),
+	PIN(UART2_RTS_N_PJ6,        UARTA,      UARTB,    GMI,          SPI4),
+	PIN(UART2_CTS_N_PJ5,        UARTA,      UARTB,    GMI,          SPI4),
+	PIN(UART3_TXD_PW6,          UARTC,      RSVD2,    GMI,          SPI4),
+	PIN(UART3_RXD_PW7,          UARTC,      RSVD2,    GMI,          SPI4),
+	PIN(UART3_CTS_N_PA1,        UARTC,      SDMMC1,   DTV,          GMI),
+	PIN(UART3_RTS_N_PC0,        UARTC,      PWM0,     DTV,          GMI),
+	PIN(PU0,                    OWR,        UARTA,    GMI,          RSVD4),
+	PIN(PU1,                    RSVD1,      UARTA,    GMI,          RSVD4),
+	PIN(PU2,                    RSVD1,      UARTA,    GMI,          RSVD4),
+	PIN(PU3,                    PWM0,       UARTA,    GMI,          DISPLAYB),
+	PIN(PU4,                    PWM1,       UARTA,    GMI,          DISPLAYB),
+	PIN(PU5,                    PWM2,       UARTA,    GMI,          DISPLAYB),
+	PIN(PU6,                    PWM3,       UARTA,    RSVD3,        GMI),
+	PIN(GEN1_I2C_SDA_PC5,       I2C1,       RSVD2,    RSVD3,        RSVD4),
+	PIN(GEN1_I2C_SCL_PC4,       I2C1,       RSVD2,    RSVD3,        RSVD4),
+	PIN(DAP4_FS_PP4,            I2S3,       GMI,      DTV,          RSVD4),
+	PIN(DAP4_DIN_PP5,           I2S3,       GMI,      RSVD3,        RSVD4),
+	PIN(DAP4_DOUT_PP6,          I2S3,       GMI,      DTV,          RSVD4),
+	PIN(DAP4_SCLK_PP7,          I2S3,       GMI,      RSVD3,        RSVD4),
+	PIN(CLK3_OUT_PEE0,          EXTPERIPH3, RSVD2,    RSVD3,        RSVD4),
+	PIN(CLK3_REQ_PEE1,          DEV3,       RSVD2,    RSVD3,        RSVD4),
+	PIN(PC7,                    RSVD1,      RSVD2,    GMI,          GMI_ALT),
+	PIN(PI5,                    SDMMC2,     RSVD2,    GMI,          RSVD4),
+	PIN(PI7,                    RSVD1,      TRACE,    GMI,          DTV),
+	PIN(PK0,                    RSVD1,      SDMMC3,   GMI,          SOC),
+	PIN(PK1,                    SDMMC2,     TRACE,    GMI,          RSVD4),
+	PIN(PJ0,                    RSVD1,      RSVD2,    GMI,          USB),
+	PIN(PJ2,                    RSVD1,      RSVD2,    GMI,          SOC),
+	PIN(PK3,                    SDMMC2,     TRACE,    GMI,          CCLA),
+	PIN(PK4,                    SDMMC2,     RSVD2,    GMI,          GMI_ALT),
+	PIN(PK2,                    RSVD1,      RSVD2,    GMI,          RSVD4),
+	PIN(PI3,                    RSVD1,      RSVD2,    GMI,          SPI4),
+	PIN(PI6,                    RSVD1,      RSVD2,    GMI,          SDMMC2),
+	PIN(PG0,                    RSVD1,      RSVD2,    GMI,          RSVD4),
+	PIN(PG1,                    RSVD1,      RSVD2,    GMI,          RSVD4),
+	PIN(PG2,                    RSVD1,      TRACE,    GMI,          RSVD4),
+	PIN(PG3,                    RSVD1,      TRACE,    GMI,          RSVD4),
+	PIN(PG4,                    RSVD1,      TMDS,     GMI,          SPI4),
+	PIN(PG5,                    RSVD1,      RSVD2,    GMI,          SPI4),
+	PIN(PG6,                    RSVD1,      RSVD2,    GMI,          SPI4),
+	PIN(PG7,                    RSVD1,      RSVD2,    GMI,          SPI4),
+	PIN(PH0,                    PWM0,       TRACE,    GMI,          DTV),
+	PIN(PH1,                    PWM1,       TMDS,     GMI,          DISPLAYA),
+	PIN(PH2,                    PWM2,       TMDS,     GMI,          CLDVFS),
+	PIN(PH3,                    PWM3,       SPI4,     GMI,          CLDVFS),
+	PIN(PH4,                    SDMMC2,     RSVD2,    GMI,          RSVD4),
+	PIN(PH5,                    SDMMC2,     RSVD2,    GMI,          RSVD4),
+	PIN(PH6,                    SDMMC2,     TRACE,    GMI,          DTV),
+	PIN(PH7,                    SDMMC2,     TRACE,    GMI,          DTV),
+	PIN(PJ7,                    UARTD,      RSVD2,    GMI,          GMI_ALT),
+	PIN(PB0,                    UARTD,      RSVD2,    GMI,          RSVD4),
+	PIN(PB1,                    UARTD,      RSVD2,    GMI,          RSVD4),
+	PIN(PK7,                    UARTD,      RSVD2,    GMI,          RSVD4),
+	PIN(PI0,                    RSVD1,      RSVD2,    GMI,          RSVD4),
+	PIN(PI1,                    RSVD1,      RSVD2,    GMI,          RSVD4),
+	PIN(PI2,                    SDMMC2,     TRACE,    GMI,          RSVD4),
+	PIN(PI4,                    SPI4,       TRACE,    GMI,          DISPLAYA),
+	PIN(GEN2_I2C_SCL_PT5,       I2C2,       RSVD2,    GMI,          RSVD4),
+	PIN(GEN2_I2C_SDA_PT6,       I2C2,       RSVD2,    GMI,          RSVD4),
+	PIN(SDMMC4_CLK_PCC4,        SDMMC4,     RSVD2,    GMI,          RSVD4),
+	PIN(SDMMC4_CMD_PT7,         SDMMC4,     RSVD2,    GMI,          RSVD4),
+	PIN(SDMMC4_DAT0_PAA0,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT1_PAA1,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT2_PAA2,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT3_PAA3,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT4_PAA4,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT5_PAA5,       SDMMC4,     SPI3,     RSVD3,        RSVD4),
+	PIN(SDMMC4_DAT6_PAA6,       SDMMC4,     SPI3,     GMI,          RSVD4),
+	PIN(SDMMC4_DAT7_PAA7,       SDMMC4,     RSVD2,    GMI,          RSVD4),
+	PIN_RESERVED,
+	/* Offset 0x3284 */
+	PIN(CAM_MCLK_PCC0,          VI,         VI_ALT1,  VI_ALT3,      SDMMC2),
+	PIN(PCC1,                   I2S4,       RSVD2,    RSVD3,        SDMMC2),
+	PIN(PBB0,                   VGP6,       VIMCLK2,  SDMMC2,       VIMCLK2_ALT),
+	PIN(CAM_I2C_SCL_PBB1,       VGP1,       I2C3,     RSVD3,        SDMMC2),
+	PIN(CAM_I2C_SDA_PBB2,       VGP2,       I2C3,     RSVD3,        SDMMC2),
+	PIN(PBB3,                   VGP3,       DISPLAYA, DISPLAYB,     SDMMC2),
+	PIN(PBB4,                   VGP4,       DISPLAYA, DISPLAYB,     SDMMC2),
+	PIN(PBB5,                   VGP5,       DISPLAYA, RSVD3,        SDMMC2),
+	PIN(PBB6,                   I2S4,       RSVD2,    DISPLAYB,     SDMMC2),
+	PIN(PBB7,                   I2S4,       RSVD2,    RSVD3,        SDMMC2),
+	PIN(PCC2,                   I2S4,       RSVD2,    SDMMC3,       SDMMC2),
+	PIN(JTAG_RTCK,              RTCK,       RSVD2,    RSVD3,        RSVD4),
+	PIN(PWR_I2C_SCL_PZ6,        I2CPWR,     RSVD2,    RSVD3,        RSVD4),
+	PIN(PWR_I2C_SDA_PZ7,        I2CPWR,     RSVD2,    RSVD3,        RSVD4),
+	PIN(KB_ROW0_PR0,            KBC,        RSVD2,    RSVD3,        RSVD4),
+	PIN(KB_ROW1_PR1,            KBC,        RSVD2,    RSVD3,        RSVD4),
+	PIN(KB_ROW2_PR2,            KBC,        RSVD2,    RSVD3,        RSVD4),
+	PIN(KB_ROW3_PR3,            KBC,        DISPLAYA, SYS,          DISPLAYB),
+	PIN(KB_ROW4_PR4,            KBC,        DISPLAYA, RSVD3,        DISPLAYB),
+	PIN(KB_ROW5_PR5,            KBC,        DISPLAYA, RSVD3,        DISPLAYB),
+	PIN(KB_ROW6_PR6,            KBC,        DISPLAYA, DISPLAYA_ALT, DISPLAYB),
+	PIN(KB_ROW7_PR7,            KBC,        RSVD2,    CLDVFS,       UARTA),
+	PIN(KB_ROW8_PS0,            KBC,        RSVD2,    CLDVFS,       UARTA),
+	PIN(KB_ROW9_PS1,            KBC,        RSVD2,    RSVD3,        UARTA),
+	PIN(KB_ROW10_PS2,           KBC,        RSVD2,    RSVD3,        UARTA),
+	PIN(KB_ROW11_PS3,           KBC,        RSVD2,    RSVD3,        IRDA),
+	PIN(KB_ROW12_PS4,           KBC,        RSVD2,    RSVD3,        IRDA),
+	PIN(KB_ROW13_PS5,           KBC,        RSVD2,    SPI2,         RSVD4),
+	PIN(KB_ROW14_PS6,           KBC,        RSVD2,    SPI2,         RSVD4),
+	PIN(KB_ROW15_PS7,           KBC,        SOC,      RSVD3,        RSVD4),
+	PIN(KB_COL0_PQ0,            KBC,        RSVD2,    SPI2,         RSVD4),
+	PIN(KB_COL1_PQ1,            KBC,        RSVD2,    SPI2,         RSVD4),
+	PIN(KB_COL2_PQ2,            KBC,        RSVD2,    SPI2,         RSVD4),
+	PIN(KB_COL3_PQ3,            KBC,        DISPLAYA, PWM2,         UARTA),
+	PIN(KB_COL4_PQ4,            KBC,        OWR,      SDMMC3,       UARTA),
+	PIN(KB_COL5_PQ5,            KBC,        RSVD2,    SDMMC3,       RSVD4),
+	PIN(KB_COL6_PQ6,            KBC,        RSVD2,    SPI2,         UARTD),
+	PIN(KB_COL7_PQ7,            KBC,        RSVD2,    SPI2,         UARTD),
+	PIN(CLK_32K_OUT_PA0,        BLINK,      SOC,      RSVD3,        RSVD4),
+	PIN_RESERVED,
+	/* Offset 0x3324 */
+	PIN(CORE_PWR_REQ,           PWRON,      RSVD2,    RSVD3,        RSVD4),
+	PIN(CPU_PWR_REQ,            CPU,        RSVD2,    RSVD3,        RSVD4),
+	PIN(PWR_INT_N,              PMI,        RSVD2,    RSVD3,        RSVD4),
+	PIN(CLK_32K_IN,             CLK,        RSVD2,    RSVD3,        RSVD4),
+	PIN(OWR,                    OWR,        RSVD2,    RSVD3,        RSVD4),
+	PIN(DAP1_FS_PN0,            I2S0,       HDA,      GMI,          RSVD4),
+	PIN(DAP1_DIN_PN1,           I2S0,       HDA,      GMI,          RSVD4),
+	PIN(DAP1_DOUT_PN2,          I2S0,       HDA,      GMI,          SATA),
+	PIN(DAP1_SCLK_PN3,          I2S0,       HDA,      GMI,          RSVD4),
+	PIN(DAP_MCLK1_REQ_PEE2,     DAP,        DAP1,     SATA,         RSVD4),
+	PIN(DAP_MCLK1_PW4,          EXTPERIPH1, DAP2,     RSVD3,        RSVD4),
+	PIN(SPDIF_IN_PK6,           SPDIF,      RSVD2,    RSVD3,        I2C3),
+	PIN(SPDIF_OUT_PK5,          SPDIF,      RSVD2,    RSVD3,        I2C3),
+	PIN(DAP2_FS_PA2,            I2S1,       HDA,      GMI,          RSVD4),
+	PIN(DAP2_DIN_PA4,           I2S1,       HDA,      GMI,          RSVD4),
+	PIN(DAP2_DOUT_PA5,          I2S1,       HDA,      GMI,          RSVD4),
+	PIN(DAP2_SCLK_PA3,          I2S1,       HDA,      GMI,          RSVD4),
+	PIN(DVFS_PWM_PX0,           SPI6,       CLDVFS,   GMI,          RSVD4),
+	PIN(GPIO_X1_AUD_PX1,        SPI6,       RSVD2,    GMI,          RSVD4),
+	PIN(GPIO_X3_AUD_PX3,        SPI6,       SPI1,     GMI,          RSVD4),
+	PIN(DVFS_CLK_PX2,           SPI6,       CLDVFS,   GMI,          RSVD4),
+	PIN(GPIO_X4_AUD_PX4,        GMI,        SPI1,     SPI2,         DAP2),
+	PIN(GPIO_X5_AUD_PX5,        GMI,        SPI1,     SPI2,         RSVD4),
+	PIN(GPIO_X6_AUD_PX6,        SPI6,       SPI1,     SPI2,         GMI),
+	PIN(GPIO_X7_AUD_PX7,        RSVD1,      SPI1,     SPI2,         RSVD4),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3390 */
+	PIN(SDMMC3_CLK_PA6,         SDMMC3,     RSVD2,    RSVD3,        SPI3),
+	PIN(SDMMC3_CMD_PA7,         SDMMC3,     PWM3,     UARTA,        SPI3),
+	PIN(SDMMC3_DAT0_PB7,        SDMMC3,     RSVD2,    RSVD3,        SPI3),
+	PIN(SDMMC3_DAT1_PB6,        SDMMC3,     PWM2,     UARTA,        SPI3),
+	PIN(SDMMC3_DAT2_PB5,        SDMMC3,     PWM1,     DISPLAYA,     SPI3),
+	PIN(SDMMC3_DAT3_PB4,        SDMMC3,     PWM0,     DISPLAYB,     SPI3),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x33bc */
+	PIN(PEX_L0_RST_N_PDD1,      PE0,        RSVD2,    RSVD3,        RSVD4),
+	PIN(PEX_L0_CLKREQ_N_PDD2,   PE0,        RSVD2,    RSVD3,        RSVD4),
+	PIN(PEX_WAKE_N_PDD3,        PE,         RSVD2,    RSVD3,        RSVD4),
+	PIN_RESERVED,
+	/* Offset 0x33cc */
+	PIN(PEX_L1_RST_N_PDD5,      PE1,        RSVD2,    RSVD3,        RSVD4),
+	PIN(PEX_L1_CLKREQ_N_PDD6,   PE1,        RSVD2,    RSVD3,        RSVD4),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x33e0 */
+	PIN(HDMI_CEC_PEE3,          CEC,        RSVD2,    RSVD3,        RSVD4),
+	PIN(SDMMC1_WP_N_PV3,        SDMMC1,     CLK12,    SPI4,         UARTA),
+	PIN(SDMMC3_CD_N_PV2,        SDMMC3,     OWR,      RSVD3,        RSVD4),
+	PIN(GPIO_W2_AUD_PW2,        SPI6,       RSVD2,    SPI2,         I2C1),
+	PIN(GPIO_W3_AUD_PW3,        SPI6,       SPI1,     SPI2,         I2C1),
+	PIN(USB_VBUS_EN0_PN4,       USB,        RSVD2,    RSVD3,        RSVD4),
+	PIN(USB_VBUS_EN1_PN5,       USB,        RSVD2,    RSVD3,        RSVD4),
+	PIN(SDMMC3_CLK_LB_IN_PEE5,  SDMMC3,     RSVD2,    RSVD3,        RSVD4),
+	PIN(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3,     RSVD2,    RSVD3,        RSVD4),
+	PIN(GMI_CLK_LB,             SDMMC2,     RSVD2,    GMI,          RSVD4),
+	PIN(RESET_OUT_N,            RSVD1,      RSVD2,    RSVD3,        RESET_OUT_N),
+	PIN(KB_ROW16_PT0,           KBC,        RSVD2,    RSVD3,        UARTC),
+	PIN(KB_ROW17_PT1,           KBC,        RSVD2,    RSVD3,        UARTC),
+	PIN(USB_VBUS_EN2_PFF1,      USB,        RSVD2,    RSVD3,        RSVD4),
+	PIN(PFF2,                   SATA,       RSVD2,    RSVD3,        RSVD4),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	/* Offset 0x3430 */
+	PIN(DP_HPD_PFF0,            DP,         RSVD2,    RSVD3,        RSVD4),
+};
+const struct pmux_pingrp_desc *tegra_soc_pingroups = tegra124_pingroups;
+
+#define MIPIPADCTRL_GRP(grp, f0, f1)	\
+	{				\
+		.funcs = {		\
+			PMUX_FUNC_##f0,	\
+			PMUX_FUNC_##f1,	\
+		},			\
+	}
+
+#define MIPIPADCTRL_RESERVED {}
+
+static const struct pmux_mipipadctrlgrp_desc tegra124_mipipadctrl_groups[] = {
+	/*              pin,   f0,  f1 */
+	/* Offset 0x820 */
+	MIPIPADCTRL_GRP(DSI_B, CSI, DSI_B),
+};
+const struct pmux_mipipadctrlgrp_desc *tegra_soc_mipipadctrl_groups = tegra124_mipipadctrl_groups;
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/pmc.c b/roms/u-boot/arch/arm/mach-tegra/tegra124/pmc.c
new file mode 100644
index 000000000..3921ffb52
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/pmc.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Google, Inc
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+
+static const struct udevice_id tegra124_syscon_ids[] = {
+	{ .compatible = "nvidia,tegra124-pmc", .data = TEGRA_SYSCON_PMC },
+};
+
+U_BOOT_DRIVER(syscon_tegra124) = {
+	.name = "tegra124_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = tegra124_syscon_ids,
+};
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/psci.c b/roms/u-boot/arch/arm/mach-tegra/tegra124/psci.c
new file mode 100644
index 000000000..ab102a622
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/psci.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2015, Siemens AG
+ * Author: Jan Kiszka <jan.kiszka@siemens.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/psci.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/powergate.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/pmc.h>
+
+static void park_cpu(void)
+{
+	while (1)
+		asm volatile("wfi");
+}
+
+/**
+ * Initialize power management for application processors
+ */
+void psci_board_init(void)
+{
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+
+	writel((u32)park_cpu, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+	/*
+	 * The naturally expected order of putting these CPUs under Flow
+	 * Controller regime would be
+	 *  - configure the Flow Controller
+	 *  - power up the CPUs
+	 *  - wait for the CPUs to hit wfi and be powered down again
+	 *
+	 * However, this doesn't work in practice. We rather need to power them
+	 * up first and park them in wfi. While they are waiting there, we can
+	 * indeed program the Flow Controller to powergate them on wfi, which
+	 * will then happen immediately as they are already in that state.
+	 */
+	tegra_powergate_power_on(TEGRA_POWERGATE_CPU1);
+	tegra_powergate_power_on(TEGRA_POWERGATE_CPU2);
+	tegra_powergate_power_on(TEGRA_POWERGATE_CPU3);
+
+	writel((2 << CSR_WAIT_WFI_SHIFT) | CSR_ENABLE, &flow->cpu1_csr);
+	writel((4 << CSR_WAIT_WFI_SHIFT) | CSR_ENABLE, &flow->cpu2_csr);
+	writel((8 << CSR_WAIT_WFI_SHIFT) | CSR_ENABLE, &flow->cpu3_csr);
+
+	writel(EVENT_MODE_STOP, &flow->halt_cpu1_events);
+	writel(EVENT_MODE_STOP, &flow->halt_cpu2_events);
+	writel(EVENT_MODE_STOP, &flow->halt_cpu3_events);
+
+	while (!(readl(&flow->cpu1_csr) & CSR_PWR_OFF_STS) ||
+		!(readl(&flow->cpu2_csr) & CSR_PWR_OFF_STS) ||
+		!(readl(&flow->cpu3_csr) & CSR_PWR_OFF_STS))
+		/* wait */;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra124/xusb-padctl.c b/roms/u-boot/arch/arm/mach-tegra/tegra124/xusb-padctl.c
new file mode 100644
index 000000000..d3c7719c3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra124/xusb-padctl.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2015, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#define pr_fmt(fmt) "tegra-xusb-padctl: " fmt
+
+#include <common.h>
+#include <errno.h>
+#include <log.h>
+#include <dm/of_access.h>
+#include <dm/ofnode.h>
+#include <linux/delay.h>
+#include <asm/global_data.h>
+
+#include "../xusb-padctl-common.h"
+
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+
+#define XUSB_PADCTL_ELPG_PROGRAM 0x01c
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN (1 << 26)
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 25)
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN (1 << 24)
+
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1 0x040
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL0_LOCKDET (1 << 19)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_REFCLK_SEL_MASK (0xf << 12)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST (1 << 1)
+
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2 0x044
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_REFCLKBUF_EN (1 << 6)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_EN (1 << 5)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_SEL (1 << 4)
+
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1 0x138
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_LOCKDET (1 << 27)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE (1 << 24)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD (1 << 3)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST (1 << 1)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ (1 << 0)
+
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1 0x148
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD (1 << 1)
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ (1 << 0)
+
+enum tegra124_function {
+	TEGRA124_FUNC_SNPS,
+	TEGRA124_FUNC_XUSB,
+	TEGRA124_FUNC_UART,
+	TEGRA124_FUNC_PCIE,
+	TEGRA124_FUNC_USB3,
+	TEGRA124_FUNC_SATA,
+	TEGRA124_FUNC_RSVD,
+};
+
+static const char *const tegra124_functions[] = {
+	"snps",
+	"xusb",
+	"uart",
+	"pcie",
+	"usb3",
+	"sata",
+	"rsvd",
+};
+
+static const unsigned int tegra124_otg_functions[] = {
+	TEGRA124_FUNC_SNPS,
+	TEGRA124_FUNC_XUSB,
+	TEGRA124_FUNC_UART,
+	TEGRA124_FUNC_RSVD,
+};
+
+static const unsigned int tegra124_usb_functions[] = {
+	TEGRA124_FUNC_SNPS,
+	TEGRA124_FUNC_XUSB,
+};
+
+static const unsigned int tegra124_pci_functions[] = {
+	TEGRA124_FUNC_PCIE,
+	TEGRA124_FUNC_USB3,
+	TEGRA124_FUNC_SATA,
+	TEGRA124_FUNC_RSVD,
+};
+
+#define TEGRA124_LANE(_name, _offset, _shift, _mask, _iddq, _funcs)	\
+	{								\
+		.name = _name,						\
+		.offset = _offset,					\
+		.shift = _shift,					\
+		.mask = _mask,						\
+		.iddq = _iddq,						\
+		.num_funcs = ARRAY_SIZE(tegra124_##_funcs##_functions),	\
+		.funcs = tegra124_##_funcs##_functions,			\
+	}
+
+static const struct tegra_xusb_padctl_lane tegra124_lanes[] = {
+	TEGRA124_LANE("otg-0",  0x004,  0, 0x3, 0, otg),
+	TEGRA124_LANE("otg-1",  0x004,  2, 0x3, 0, otg),
+	TEGRA124_LANE("otg-2",  0x004,  4, 0x3, 0, otg),
+	TEGRA124_LANE("ulpi-0", 0x004, 12, 0x1, 0, usb),
+	TEGRA124_LANE("hsic-0", 0x004, 14, 0x1, 0, usb),
+	TEGRA124_LANE("hsic-1", 0x004, 15, 0x1, 0, usb),
+	TEGRA124_LANE("pcie-0", 0x134, 16, 0x3, 1, pci),
+	TEGRA124_LANE("pcie-1", 0x134, 18, 0x3, 2, pci),
+	TEGRA124_LANE("pcie-2", 0x134, 20, 0x3, 3, pci),
+	TEGRA124_LANE("pcie-3", 0x134, 22, 0x3, 4, pci),
+	TEGRA124_LANE("pcie-4", 0x134, 24, 0x3, 5, pci),
+	TEGRA124_LANE("sata-0", 0x134, 26, 0x3, 6, pci),
+};
+
+static int tegra_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
+{
+	u32 value;
+
+	if (padctl->enable++ > 0)
+		return 0;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	udelay(100);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	udelay(100);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	return 0;
+}
+
+static int tegra_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
+{
+	u32 value;
+
+	if (padctl->enable == 0) {
+		pr_err("unbalanced enable/disable");
+		return 0;
+	}
+
+	if (--padctl->enable > 0)
+		return 0;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	udelay(100);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	udelay(100);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	return 0;
+}
+
+static int phy_prepare(struct tegra_xusb_phy *phy)
+{
+	return tegra_xusb_padctl_enable(phy->padctl);
+}
+
+static int phy_unprepare(struct tegra_xusb_phy *phy)
+{
+	return tegra_xusb_padctl_disable(phy->padctl);
+}
+
+static int pcie_phy_enable(struct tegra_xusb_phy *phy)
+{
+	struct tegra_xusb_padctl *padctl = phy->padctl;
+	int err = -ETIMEDOUT;
+	unsigned long start;
+	u32 value;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+	value &= ~XUSB_PADCTL_IOPHY_PLL_P0_CTL1_REFCLK_SEL_MASK;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL2);
+	value |= XUSB_PADCTL_IOPHY_PLL_P0_CTL2_REFCLKBUF_EN |
+		 XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_EN |
+		 XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_SEL;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL2);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+	value |= XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+	start = get_timer(0);
+
+	while (get_timer(start) < 50) {
+		value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+		if (value & XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL0_LOCKDET) {
+			err = 0;
+			break;
+		}
+	}
+
+	return err;
+}
+
+static int pcie_phy_disable(struct tegra_xusb_phy *phy)
+{
+	struct tegra_xusb_padctl *padctl = phy->padctl;
+	u32 value;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+	value &= ~XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+	return 0;
+}
+
+static int sata_phy_enable(struct tegra_xusb_phy *phy)
+{
+	struct tegra_xusb_padctl *padctl = phy->padctl;
+	int err = -ETIMEDOUT;
+	unsigned long start;
+	u32 value;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+	value &= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
+	value &= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+	value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
+	value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+	value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+	value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+	start = get_timer(0);
+
+	while (get_timer(start) < 50) {
+		value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+		if (value & XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_LOCKDET) {
+			err = 0;
+			break;
+		}
+	}
+
+	return err;
+}
+
+static int sata_phy_disable(struct tegra_xusb_phy *phy)
+{
+	struct tegra_xusb_padctl *padctl = phy->padctl;
+	u32 value;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+	value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+	value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+	value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
+	value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+	value |= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
+	value |= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ;
+	padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+
+	return 0;
+}
+
+static const struct tegra_xusb_phy_ops pcie_phy_ops = {
+	.prepare = phy_prepare,
+	.enable = pcie_phy_enable,
+	.disable = pcie_phy_disable,
+	.unprepare = phy_unprepare,
+};
+
+static const struct tegra_xusb_phy_ops sata_phy_ops = {
+	.prepare = phy_prepare,
+	.enable = sata_phy_enable,
+	.disable = sata_phy_disable,
+	.unprepare = phy_unprepare,
+};
+
+static struct tegra_xusb_phy tegra124_phys[] = {
+	{
+		.type = TEGRA_XUSB_PADCTL_PCIE,
+		.ops = &pcie_phy_ops,
+		.padctl = &padctl,
+	},
+	{
+		.type = TEGRA_XUSB_PADCTL_SATA,
+		.ops = &sata_phy_ops,
+		.padctl = &padctl,
+	},
+};
+
+static const struct tegra_xusb_padctl_soc tegra124_socdata = {
+	.lanes = tegra124_lanes,
+	.num_lanes = ARRAY_SIZE(tegra124_lanes),
+	.functions = tegra124_functions,
+	.num_functions = ARRAY_SIZE(tegra124_functions),
+	.phys = tegra124_phys,
+	.num_phys = ARRAY_SIZE(tegra124_phys),
+};
+
+void tegra_xusb_padctl_init(void)
+{
+	ofnode nodes[1];
+	int count = 0;
+	int ret;
+
+	debug("%s: start\n", __func__);
+	if (of_live_active()) {
+		struct device_node *np = of_find_compatible_node(NULL, NULL,
+						"nvidia,tegra124-xusb-padctl");
+
+		debug("np=%p\n", np);
+		if (np) {
+			nodes[0] = np_to_ofnode(np);
+			count = 1;
+		}
+	} else {
+		int node_offsets[1];
+		int i;
+
+		count = fdtdec_find_aliases_for_id(gd->fdt_blob, "padctl",
+				COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL,
+				node_offsets, ARRAY_SIZE(node_offsets));
+		for (i = 0; i < count; i++)
+			nodes[i] = offset_to_ofnode(node_offsets[i]);
+	}
+
+	ret = tegra_xusb_process_nodes(nodes, count, &tegra124_socdata);
+	debug("%s: done, ret=%d\n", __func__, ret);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra186/Kconfig b/roms/u-boot/arch/arm/mach-tegra/tegra186/Kconfig
new file mode 100644
index 000000000..b2e53b58c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra186/Kconfig
@@ -0,0 +1,26 @@
+# Copyright (c) 2016, NVIDIA CORPORATION.
+#
+# SPDX-License-Identifier: GPL-2.0
+
+if TEGRA186
+
+choice
+	prompt "Tegra186 board select"
+
+config TARGET_P2771_0000
+	bool "NVIDIA Tegra186 P2771-0000 board"
+	select BOARD_LATE_INIT
+	help
+	  P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The
+	  combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB
+	  micro-B port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO
+	  expansion headers.
+
+endchoice
+
+config SYS_SOC
+	default "tegra186"
+
+source "board/nvidia/p2771-0000/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra186/Makefile b/roms/u-boot/arch/arm/mach-tegra/tegra186/Makefile
new file mode 100644
index 000000000..3a2405027
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra186/Makefile
@@ -0,0 +1,5 @@
+# Copyright (c) 2016, NVIDIA CORPORATION.
+#
+# SPDX-License-Identifier: GPL-2.0
+
+obj-y += cache.o
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra186/cache.S b/roms/u-boot/arch/arm/mach-tegra/tegra186/cache.S
new file mode 100644
index 000000000..a449d242e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra186/cache.S
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+#define SMC_SIP_INVOKE_MCE		0x82FFFF00
+#define MCE_SMC_ROC_FLUSH_CACHE		(SMC_SIP_INVOKE_MCE | 11)
+#define MCE_SMC_ROC_FLUSH_CACHE_ONLY	(SMC_SIP_INVOKE_MCE | 14)
+#define MCE_SMC_ROC_CLEAN_CACHE_ONLY	(SMC_SIP_INVOKE_MCE | 15)
+
+ENTRY(__asm_tegra_cache_smc)
+	mov	x1, #0
+	mov	x2, #0
+	mov	x3, #0
+	mov	x4, #0
+	mov	x5, #0
+	mov	x6, #0
+	smc	#0
+	mov	x0, #0
+	ret
+ENDPROC(__asm_invalidate_l3_dcache)
+
+ENTRY(__asm_invalidate_l3_dcache)
+	mov	x0, #(MCE_SMC_ROC_FLUSH_CACHE_ONLY & 0xffff)
+	movk	x0, #(MCE_SMC_ROC_FLUSH_CACHE_ONLY >> 16), lsl #16
+	b	__asm_tegra_cache_smc
+ENDPROC(__asm_invalidate_l3_dcache)
+
+ENTRY(__asm_flush_l3_dcache)
+	mov	x0, #(MCE_SMC_ROC_CLEAN_CACHE_ONLY & 0xffff)
+	movk	x0, #(MCE_SMC_ROC_CLEAN_CACHE_ONLY >> 16), lsl #16
+	b	__asm_tegra_cache_smc
+ENDPROC(__asm_flush_l3_dcache)
+
+ENTRY(__asm_invalidate_l3_icache)
+	mov	x0, #(MCE_SMC_ROC_FLUSH_CACHE & 0xffff)
+	movk	x0, #(MCE_SMC_ROC_FLUSH_CACHE >> 16), lsl #16
+	b	__asm_tegra_cache_smc
+ENDPROC(__asm_invalidate_l3_icache)
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/Kconfig b/roms/u-boot/arch/arm/mach-tegra/tegra20/Kconfig
new file mode 100644
index 000000000..5c4d35b56
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/Kconfig
@@ -0,0 +1,58 @@
+if TEGRA20
+
+choice
+	prompt "Tegra20 board select"
+	optional
+
+config TARGET_HARMONY
+	bool "NVIDIA Tegra20 Harmony evaluation board"
+	select BOARD_LATE_INIT
+
+config TARGET_MEDCOM_WIDE
+	bool "Avionic Design Medcom-Wide board"
+	select BOARD_LATE_INIT
+
+config TARGET_PAZ00
+	bool "Paz00 board"
+	select BOARD_LATE_INIT
+
+config TARGET_PLUTUX
+	bool "Avionic Design Plutux board"
+	select BOARD_LATE_INIT
+
+config TARGET_SEABOARD
+	bool "NVIDIA Seaboard"
+	select BOARD_LATE_INIT
+
+config TARGET_TEC
+	bool "Avionic Design Tamonten Evaluation Carrier"
+	select BOARD_LATE_INIT
+
+config TARGET_TRIMSLICE
+	bool "Compulab TrimSlice board"
+	select BOARD_LATE_INIT
+
+config TARGET_VENTANA
+	bool "NVIDIA Tegra20 Ventana evaluation board"
+	select BOARD_LATE_INIT
+
+config TARGET_COLIBRI_T20
+	bool "Toradex Colibri T20 board"
+	select BOARD_LATE_INIT
+
+endchoice
+
+config SYS_SOC
+	default "tegra20"
+
+source "board/nvidia/harmony/Kconfig"
+source "board/avionic-design/medcom-wide/Kconfig"
+source "board/compal/paz00/Kconfig"
+source "board/avionic-design/plutux/Kconfig"
+source "board/nvidia/seaboard/Kconfig"
+source "board/avionic-design/tec/Kconfig"
+source "board/compulab/trimslice/Kconfig"
+source "board/nvidia/ventana/Kconfig"
+source "board/toradex/colibri_t20/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/Makefile b/roms/u-boot/arch/arm/mach-tegra/tegra20/Makefile
new file mode 100644
index 000000000..bb17c90cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010,2011 Nvidia Corporation.
+
+ifdef CONFIG_SPL_BUILD
+obj-y	+= cpu.o
+endif
+
+# The AVP is ARMv4T architecture so we must use special compiler
+# flags for any startup files it might use.
+CFLAGS_warmboot_avp.o = -march=armv4t -U__LINUX_ARM_ARCH__ \
+	-D__LINUX_ARM_ARCH__=4
+CFLAGS_REMOVE_warmboot_avp.o := $(LTO_CFLAGS)
+
+obj-y	+= clock.o funcmux.o pinmux.o
+obj-$(CONFIG_TEGRA_LP0) += warmboot.o crypto.o warmboot_avp.o
+obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+obj-$(CONFIG_TEGRA_PMU) += pmu.o
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/clock.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/clock.c
new file mode 100644
index 000000000..24e8a13b1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/clock.c
@@ -0,0 +1,774 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra20 Clock control functions */
+
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <linux/delay.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra20 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
+	CLOCK_TYPE_MCPA,	/* and so on */
+	CLOCK_TYPE_MCPT,
+	CLOCK_TYPE_PCM,
+	CLOCK_TYPE_PCMT,
+	CLOCK_TYPE_PCMT16,	/* CLOCK_TYPE_PCMT with 16-bit divider */
+	CLOCK_TYPE_PCXTS,
+	CLOCK_TYPE_PDCT,
+
+	CLOCK_TYPE_COUNT,
+	CLOCK_TYPE_NONE = -1,	/* invalid clock type */
+};
+
+enum {
+	CLOCK_MAX_MUX	= 4	/* number of source options for each clock */
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code. Note that CLOCK_TYPE_PCXTS
+ * is special as it has 5 sources. Since it also has a different number of
+ * bits in its register for the source, we just handle it with a special
+ * case in the code.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX] = {
+	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(OSC)	},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO)	},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC)	},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE)	},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC)	},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC)	},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(XCPU),	CLK(OSC)	},
+	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC)	},
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. This is
+ * not in the header file since it is for purely internal use - we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ *
+ * Note to SOC vendors: perhaps define a unified numbering for peripherals and
+ * use it for reset, clock enable, clock source/divider and even pinmuxing
+ * if you can.
+ */
+enum periphc_internal_id {
+	/* 0x00 */
+	PERIPHC_I2S1,
+	PERIPHC_I2S2,
+	PERIPHC_SPDIF_OUT,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_PWM,
+	PERIPHC_SPI1,
+	PERIPHC_SPI2,
+	PERIPHC_SPI3,
+
+	/* 0x08 */
+	PERIPHC_XIO,
+	PERIPHC_I2C1,
+	PERIPHC_DVC_I2C,
+	PERIPHC_TWC,
+	PERIPHC_0c,
+	PERIPHC_10,	/* PERIPHC_SPI1, what is this really? */
+	PERIPHC_DISP1,
+	PERIPHC_DISP2,
+
+	/* 0x10 */
+	PERIPHC_CVE,
+	PERIPHC_IDE0,
+	PERIPHC_VI,
+	PERIPHC_1c,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC2,
+	PERIPHC_G3D,
+	PERIPHC_G2D,
+
+	/* 0x18 */
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC4,
+	PERIPHC_VFIR,
+	PERIPHC_EPP,
+	PERIPHC_MPE,
+	PERIPHC_MIPI,
+	PERIPHC_UART1,
+	PERIPHC_UART2,
+
+	/* 0x20 */
+	PERIPHC_HOST1X,
+	PERIPHC_21,
+	PERIPHC_TVO,
+	PERIPHC_HDMI,
+	PERIPHC_24,
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_EMC,
+
+	/* 0x28 */
+	PERIPHC_UART3,
+	PERIPHC_29,
+	PERIPHC_VI_SENSOR,
+	PERIPHC_2b,
+	PERIPHC_2c,
+	PERIPHC_SPI4,
+	PERIPHC_I2C3,
+	PERIPHC_SDMMC3,
+
+	/* 0x30 */
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_VDE,
+	PERIPHC_OWR,
+	PERIPHC_NOR,
+	PERIPHC_CSITE,
+
+	PERIPHC_COUNT,
+
+	PERIPHC_NONE = -1,
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+	/* 0x00 */
+	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PCM),
+	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PCXTS),
+	TYPE(PERIPHC_SPI1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SPI22,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SPI3,	CLOCK_TYPE_PCMT),
+
+	/* 0x08 */
+	TYPE(PERIPHC_XIO,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_DVC_I2C,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_TWC,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SPI1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PDCT),
+
+	/* 0x10 */
+	TYPE(PERIPHC_CVE,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_IDE0,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_G3D,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_G2D,	CLOCK_TYPE_MCPA),
+
+	/* 0x18 */
+	TYPE(PERIPHC_NDFLASH,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_EPP,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MPE,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MIPI,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PCMT),
+
+	/* 0x20 */
+	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVO,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_HDMI,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVDAC,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPT),
+
+	/* 0x28 */
+	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SPI4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PCMT),
+
+	/* 0x30 */
+	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
+ *	SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+	/* Low word: 31:0 */
+	NONE(CPU),
+	NONE(RESERVED1),
+	NONE(RESERVED2),
+	NONE(AC97),
+	NONE(RTC),
+	NONE(TMR),
+	PERIPHC_UART1,
+	PERIPHC_UART2,	/* and vfir 0x68 */
+
+	/* 0x08 */
+	NONE(GPIO),
+	PERIPHC_SDMMC2,
+	NONE(SPDIF),		/* 0x08 and 0x0c, unclear which to use */
+	PERIPHC_I2S1,
+	PERIPHC_I2C1,
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC4,
+
+	/* 0x10 */
+	PERIPHC_TWC,
+	PERIPHC_PWM,
+	PERIPHC_I2S2,
+	PERIPHC_EPP,
+	PERIPHC_VI,
+	PERIPHC_G2D,
+	NONE(USBD),
+	NONE(ISP),
+
+	/* 0x18 */
+	PERIPHC_G3D,
+	PERIPHC_IDE0,
+	PERIPHC_DISP2,
+	PERIPHC_DISP1,
+	PERIPHC_HOST1X,
+	NONE(VCP),
+	NONE(RESERVED30),
+	NONE(CACHE2),
+
+	/* Middle word: 63:32 */
+	NONE(MEM),
+	NONE(AHBDMA),
+	NONE(APBDMA),
+	NONE(RESERVED35),
+	NONE(KBC),
+	NONE(STAT_MON),
+	NONE(PMC),
+	NONE(FUSE),
+
+	/* 0x28 */
+	NONE(KFUSE),
+	NONE(SBC1),	/* SBC1, 0x34, is this SPI1? */
+	PERIPHC_NOR,
+	PERIPHC_SPI1,
+	PERIPHC_SPI2,
+	PERIPHC_XIO,
+	PERIPHC_SPI3,
+	PERIPHC_DVC_I2C,
+
+	/* 0x30 */
+	NONE(DSI),
+	PERIPHC_TVO,	/* also CVE 0x40 */
+	PERIPHC_MIPI,
+	PERIPHC_HDMI,
+	PERIPHC_CSITE,
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_UART3,
+
+	/* 0x38 */
+	NONE(RESERVED56),
+	PERIPHC_EMC,
+	NONE(USB2),
+	NONE(USB3),
+	PERIPHC_MPE,
+	PERIPHC_VDE,
+	NONE(BSEA),
+	NONE(BSEV),
+
+	/* Upper word 95:64 */
+	NONE(SPEEDO),
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_I2C3,
+	PERIPHC_SPI4,
+	PERIPHC_SDMMC3,
+	NONE(PCIE),
+	PERIPHC_OWR,
+
+	/* 0x48 */
+	NONE(AFI),
+	NONE(CORESIGHT),
+	NONE(PCIEXCLK),
+	NONE(AVPUCQ),
+	NONE(RESERVED76),
+	NONE(RESERVED77),
+	NONE(RESERVED78),
+	NONE(RESERVED79),
+
+	/* 0x50 */
+	NONE(RESERVED80),
+	NONE(RESERVED81),
+	NONE(RESERVED82),
+	NONE(RESERVED83),
+	NONE(IRAMA),
+	NONE(IRAMB),
+	NONE(IRAMC),
+	NONE(IRAMD),
+
+	/* 0x58 */
+	NONE(CRAM2),
+};
+
+/*
+ * PLL divider shift/mask tables for all PLL IDs.
+ */
+struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
+	/*
+	 * T20 and T25
+	 * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.)
+	 *       If lock_ena or lock_det are >31, they're not used in that PLL.
+	 */
+
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF,  .p_shift = 20, .p_mask = 0x0F,
+	  .lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 },	/* PLLC */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF,  .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 0,  .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLM */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLP */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLA */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x01,
+	  .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLU */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLD */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF,  .p_shift = 20, .p_mask = 0x0F,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 0, .kvco_mask = 0 },	/* PLLX */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 9,  .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLE */
+	{ .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 0, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLS */
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. T20 has 4 frequencies that it supports.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	enum periphc_internal_id internal_id;
+
+	assert(clock_periph_id_isvalid(periph_id));
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(internal_id != -1);
+	return &clkrst->crc_clk_src[internal_id];
+}
+
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+			  int *divider_bits, int *type)
+{
+	enum periphc_internal_id internal_id;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return -1;
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	if (!periphc_internal_id_isvalid(internal_id))
+		return -1;
+
+	*type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(*type))
+		return -1;
+
+	/*
+	 * Special cases here for the clock with a 4-bit source mux and I2C
+	 * with its 16-bit divisor
+	 */
+	if (*type == CLOCK_TYPE_PCXTS)
+		*mux_bits = MASK_BITS_31_28;
+	else
+		*mux_bits = MASK_BITS_31_30;
+	if (*type == CLOCK_TYPE_PCMT16)
+		*divider_bits = 16;
+	else
+		*divider_bits = 8;
+
+	return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+	enum periphc_internal_id internal_id;
+	int type;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return CLOCK_ID_NONE;
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	if (!periphc_internal_id_isvalid(internal_id))
+		return CLOCK_ID_NONE;
+
+	type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(type))
+		return CLOCK_ID_NONE;
+
+	return clock_source[type][source];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id	peripheral to start
+ * @param source	PLL id of required parent clock
+ * @param mux_bits	Set to number of bits in mux register: 2 or 4
+ * @param divider_bits	Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+		enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+	enum clock_type_id type;
+	int mux, err;
+
+	err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+	assert(!err);
+
+	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+		if (clock_source[type][mux] == parent)
+			return mux;
+
+	/*
+	 * Not found: it might be looking for the 'S' in CLOCK_TYPE_PCXTS
+	 * which is not in our table. If not, then they are asking for a
+	 * source which this peripheral can't access through its mux.
+	 */
+	assert(type == CLOCK_TYPE_PCXTS);
+	assert(parent == CLOCK_ID_SFROM32KHZ);
+	if (type == CLOCK_TYPE_PCXTS && parent == CLOCK_ID_SFROM32KHZ)
+		return 4;	/* mux value for this clock */
+
+	/* if we get here, either us or the caller has made a mistake */
+	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+		parent);
+	return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+	u32 reg;
+
+	/* Enable/disable the clock to this peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	reg = readl(clk);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+	u32 reg;
+
+	/* Enable/disable reset to the peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	reg = readl(reset);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, reset);
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id	Clock ID according to tegra20 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+	if (clk_id > PERIPH_ID_COUNT)
+		return PERIPH_ID_NONE;
+
+	switch (clk_id) {
+	case PERIPH_ID_RESERVED1:
+	case PERIPH_ID_RESERVED2:
+	case PERIPH_ID_RESERVED30:
+	case PERIPH_ID_RESERVED35:
+	case PERIPH_ID_RESERVED56:
+	case PERIPH_ID_PCIEXCLK:
+	case PERIPH_ID_RESERVED76:
+	case PERIPH_ID_RESERVED77:
+	case PERIPH_ID_RESERVED78:
+	case PERIPH_ID_RESERVED79:
+	case PERIPH_ID_RESERVED80:
+	case PERIPH_ID_RESERVED81:
+	case PERIPH_ID_RESERVED82:
+	case PERIPH_ID_RESERVED83:
+	case PERIPH_ID_RESERVED91:
+		return PERIPH_ID_NONE;
+	default:
+		return clk_id;
+	}
+}
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
+
+void clock_early_init(void)
+{
+	/*
+	 * PLLP output frequency set to 216MHz
+	 * PLLC output frequency set to 600Mhz
+	 *
+	 * TODO: Can we calculate these values instead of hard-coding?
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 432, 12, 1, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 432, 26, 1, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 432, 13, 1, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+}
+
+void arch_timer_init(void)
+{
+}
+
+#define PMC_SATA_PWRGT 0x1ac
+#define  PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE (1 << 5)
+#define  PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1 << 4)
+
+#define PLLE_SS_CNTL 0x68
+#define  PLLE_SS_CNTL_SSCINCINTRV(x) (((x) & 0x3f) << 24)
+#define  PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
+#define  PLLE_SS_CNTL_SSCBYP (1 << 12)
+#define  PLLE_SS_CNTL_INTERP_RESET (1 << 11)
+#define  PLLE_SS_CNTL_BYPASS_SS (1 << 10)
+#define  PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
+
+#define PLLE_BASE 0x0e8
+#define  PLLE_BASE_ENABLE_CML (1 << 31)
+#define  PLLE_BASE_ENABLE (1 << 30)
+#define  PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24)
+#define  PLLE_BASE_PLDIV(x) (((x) & 0x3f) << 16)
+#define  PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
+#define  PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
+
+#define PLLE_MISC 0x0ec
+#define  PLLE_MISC_SETUP_BASE(x) (((x) & 0xffff) << 16)
+#define  PLLE_MISC_PLL_READY (1 << 15)
+#define  PLLE_MISC_LOCK (1 << 11)
+#define  PLLE_MISC_LOCK_ENABLE (1 << 9)
+#define  PLLE_MISC_SETUP_EXT(x) (((x) & 0x3) << 2)
+
+static int tegra_plle_train(void)
+{
+	unsigned int timeout = 2000;
+	unsigned long value;
+
+	value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+	value |= PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
+	writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+	value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+	value |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
+	writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+	value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+	value &= ~PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
+	writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+	do {
+		value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+		if (value & PLLE_MISC_PLL_READY)
+			break;
+
+		udelay(100);
+	} while (--timeout);
+
+	if (timeout == 0) {
+		pr_err("timeout waiting for PLLE to become ready");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+int tegra_plle_enable(void)
+{
+	unsigned int timeout = 1000;
+	u32 value;
+	int err;
+
+	/* disable PLLE clock */
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value &= ~PLLE_BASE_ENABLE_CML;
+	value &= ~PLLE_BASE_ENABLE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	/* clear lock enable and setup field */
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	value &= ~PLLE_MISC_LOCK_ENABLE;
+	value &= ~PLLE_MISC_SETUP_BASE(0xffff);
+	value &= ~PLLE_MISC_SETUP_EXT(0x3);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	if ((value & PLLE_MISC_PLL_READY) == 0) {
+		err = tegra_plle_train();
+		if (err < 0) {
+			pr_err("failed to train PLLE: %d", err);
+			return err;
+		}
+	}
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	value |= PLLE_MISC_SETUP_BASE(0x7);
+	value |= PLLE_MISC_LOCK_ENABLE;
+	value |= PLLE_MISC_SETUP_EXT(0);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET |
+		 PLLE_SS_CNTL_BYPASS_SS;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value |= PLLE_BASE_ENABLE_CML | PLLE_BASE_ENABLE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	do {
+		value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+		if (value & PLLE_MISC_LOCK)
+			break;
+
+		udelay(2);
+	} while (--timeout);
+
+	if (timeout == 0) {
+		pr_err("timeout waiting for PLLE to lock");
+		return -ETIMEDOUT;
+	}
+
+	udelay(50);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value &= ~PLLE_SS_CNTL_SSCINCINTRV(0x3f);
+	value |= PLLE_SS_CNTL_SSCINCINTRV(0x18);
+
+	value &= ~PLLE_SS_CNTL_SSCINC(0xff);
+	value |= PLLE_SS_CNTL_SSCINC(0x01);
+
+	value &= ~PLLE_SS_CNTL_SSCBYP;
+	value &= ~PLLE_SS_CNTL_INTERP_RESET;
+	value &= ~PLLE_SS_CNTL_BYPASS_SS;
+
+	value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff);
+	value |= PLLE_SS_CNTL_SSCMAX(0x24);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	return 0;
+}
+
+struct periph_clk_init periph_clk_init_table[] = {
+	{ PERIPH_ID_SPI1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_DISP1, CLOCK_ID_CGENERAL },
+	{ PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
+	{ PERIPH_ID_DVC_I2C, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
+	{ -1, },
+};
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/cpu.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/cpu.c
new file mode 100644
index 000000000..e5b60598f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/cpu.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/pmc.h>
+#include <linux/delay.h>
+#include "../cpu.h"
+
+static void enable_cpu_power_rail(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	u32 reg;
+
+	reg = readl(&pmc->pmc_cntrl);
+	reg |= CPUPWRREQ_OE;
+	writel(reg, &pmc->pmc_cntrl);
+
+	/*
+	 * The TI PMU65861C needs a 3.75ms delay between enabling
+	 * the power rail and enabling the CPU clock.  This delay
+	 * between SM1EN and SM1 is for switching time + the ramp
+	 * up of the voltage to the CPU (VDD_CPU from PMU).
+	 */
+	udelay(3750);
+}
+
+void start_cpu(u32 reset_vector)
+{
+	/* Enable VDD_CPU */
+	enable_cpu_power_rail();
+
+	/* Hold the CPUs in reset */
+	reset_A9_cpu(1);
+
+	/* Disable the CPU clock */
+	enable_cpu_clock(0);
+
+	/* Enable CoreSight */
+	clock_enable_coresight(1);
+
+	/*
+	 * Set the entry point for CPU execution from reset,
+	 *  if it's a non-zero value.
+	 */
+	if (reset_vector)
+		writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+	/* Enable the CPU clock */
+	enable_cpu_clock(1);
+
+	/* If the CPU doesn't already have power, power it up */
+	powerup_cpu();
+
+	/* Take the CPU out of reset */
+	reset_A9_cpu(0);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/crypto.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/crypto.c
new file mode 100644
index 000000000..1efaa5c3e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/crypto.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <log.h>
+#include <linux/errno.h>
+#include "crypto.h"
+#include "uboot_aes.h"
+
+static u8 zero_key[16];
+
+#define AES_CMAC_CONST_RB 0x87  /* from RFC 4493, Figure 2.2 */
+
+enum security_op {
+	SECURITY_SIGN		= 1 << 0,	/* Sign the data */
+	SECURITY_ENCRYPT	= 1 << 1,	/* Encrypt the data */
+};
+
+/**
+ * Shift a vector left by one bit
+ *
+ * \param in	Input vector
+ * \param out	Output vector
+ * \param size	Length of vector in bytes
+ */
+static void left_shift_vector(u8 *in, u8 *out, int size)
+{
+	int carry = 0;
+	int i;
+
+	for (i = size - 1; i >= 0; i--) {
+		out[i] = (in[i] << 1) | carry;
+		carry = in[i] >> 7;	/* get most significant bit */
+	}
+}
+
+/**
+ * Sign a block of data, putting the result into dst.
+ *
+ * \param key			Input AES key, length AES128_KEY_LENGTH
+ * \param key_schedule		Expanded key to use
+ * \param src			Source data of length 'num_aes_blocks' blocks
+ * \param dst			Destination buffer, length AES128_KEY_LENGTH
+ * \param num_aes_blocks	Number of AES blocks to encrypt
+ */
+static void sign_object(u8 *key, u8 *key_schedule, u8 *src, u8 *dst,
+			u32 num_aes_blocks)
+{
+	u8 tmp_data[AES128_KEY_LENGTH];
+	u8 iv[AES128_KEY_LENGTH] = {0};
+	u8 left[AES128_KEY_LENGTH];
+	u8 k1[AES128_KEY_LENGTH];
+	u8 *cbc_chain_data;
+	unsigned i;
+
+	cbc_chain_data = zero_key;	/* Convenient array of 0's for IV */
+
+	/* compute K1 constant needed by AES-CMAC calculation */
+	for (i = 0; i < AES128_KEY_LENGTH; i++)
+		tmp_data[i] = 0;
+
+	aes_cbc_encrypt_blocks(AES128_KEY_LENGTH, key_schedule, iv,
+			       tmp_data, left, 1);
+
+	left_shift_vector(left, k1, sizeof(left));
+
+	if ((left[0] >> 7) != 0) /* get MSB of L */
+		k1[AES128_KEY_LENGTH - 1] ^= AES_CMAC_CONST_RB;
+
+	/* compute the AES-CMAC value */
+	for (i = 0; i < num_aes_blocks; i++) {
+		/* Apply the chain data */
+		aes_apply_cbc_chain_data(cbc_chain_data, src, tmp_data);
+
+		/* for the final block, XOR K1 into the IV */
+		if (i == num_aes_blocks - 1)
+			aes_apply_cbc_chain_data(tmp_data, k1, tmp_data);
+
+		/* encrypt the AES block */
+		aes_encrypt(AES128_KEY_LENGTH, tmp_data,
+			    key_schedule, dst);
+
+		debug("sign_obj: block %d of %d\n", i, num_aes_blocks);
+
+		/* Update pointers for next loop. */
+		cbc_chain_data = dst;
+		src += AES128_KEY_LENGTH;
+	}
+}
+
+/**
+ * Encrypt and sign a block of data (depending on security mode).
+ *
+ * \param key		Input AES key, length AES128_KEY_LENGTH
+ * \param oper		Security operations mask to perform (enum security_op)
+ * \param src		Source data
+ * \param length	Size of source data
+ * \param sig_dst	Destination address for signature, AES128_KEY_LENGTH bytes
+ */
+static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src,
+			    u32 length, u8 *sig_dst)
+{
+	u32 num_aes_blocks;
+	u8 key_schedule[AES128_EXPAND_KEY_LENGTH];
+	u8 iv[AES128_KEY_LENGTH] = {0};
+
+	debug("encrypt_and_sign: length = %d\n", length);
+
+	/*
+	 * The only need for a key is for signing/checksum purposes, so
+	 * if not encrypting, expand a key of 0s.
+	 */
+	aes_expand_key(oper & SECURITY_ENCRYPT ? key : zero_key,
+		       AES128_KEY_LENGTH, key_schedule);
+
+	num_aes_blocks = (length + AES128_KEY_LENGTH - 1) / AES128_KEY_LENGTH;
+
+	if (oper & SECURITY_ENCRYPT) {
+		/* Perform this in place, resulting in src being encrypted. */
+		debug("encrypt_and_sign: begin encryption\n");
+		aes_cbc_encrypt_blocks(AES128_KEY_LENGTH, key_schedule, iv, src,
+				       src, num_aes_blocks);
+		debug("encrypt_and_sign: end encryption\n");
+	}
+
+	if (oper & SECURITY_SIGN) {
+		/* encrypt the data, overwriting the result in signature. */
+		debug("encrypt_and_sign: begin signing\n");
+		sign_object(key, key_schedule, src, sig_dst, num_aes_blocks);
+		debug("encrypt_and_sign: end signing\n");
+	}
+
+	return 0;
+}
+
+int sign_data_block(u8 *source, unsigned length, u8 *signature)
+{
+	return encrypt_and_sign(zero_key, SECURITY_SIGN, source,
+				length, signature);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/crypto.h b/roms/u-boot/arch/arm/mach-tegra/tegra20/crypto.h
new file mode 100644
index 000000000..a773d03fc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/crypto.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _CRYPTO_H_
+#define _CRYPTO_H_
+
+/**
+ * Sign a block of data
+ *
+ * \param source	Source data
+ * \param length	Size of source data
+ * \param signature	Destination address for signature, AES_KEY_LENGTH bytes
+ */
+int sign_data_block(u8 *source, unsigned length, u8 *signature);
+
+#endif /* #ifndef _CRYPTO_H_ */
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/display.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/display.c
new file mode 100644
index 000000000..869db285a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/display.c
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  (C) Copyright 2010
+ *  NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/display.h>
+#include <asm/arch-tegra/dc.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/emc.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/emc.c
new file mode 100644
index 000000000..d55b09b4a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/emc.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/apb_misc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/emc.h>
+#include <asm/arch/tegra.h>
+
+/*
+ * The EMC registers have shadow registers.  When the EMC clock is updated
+ * in the clock controller, the shadow registers are copied to the active
+ * registers, allowing glitchless memory bus frequency changes.
+ * This function updates the shadow registers for a new clock frequency,
+ * and relies on the clock lock on the emc clock to avoid races between
+ * multiple frequency changes
+ */
+
+/*
+ * This table defines the ordering of the registers provided to
+ * tegra_set_mmc()
+ * TODO: Convert to fdt version once available
+ */
+static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
+	0x2c,	/* RC */
+	0x30,	/* RFC */
+	0x34,	/* RAS */
+	0x38,	/* RP */
+	0x3c,	/* R2W */
+	0x40,	/* W2R */
+	0x44,	/* R2P */
+	0x48,	/* W2P */
+	0x4c,	/* RD_RCD */
+	0x50,	/* WR_RCD */
+	0x54,	/* RRD */
+	0x58,	/* REXT */
+	0x5c,	/* WDV */
+	0x60,	/* QUSE */
+	0x64,	/* QRST */
+	0x68,	/* QSAFE */
+	0x6c,	/* RDV */
+	0x70,	/* REFRESH */
+	0x74,	/* BURST_REFRESH_NUM */
+	0x78,	/* PDEX2WR */
+	0x7c,	/* PDEX2RD */
+	0x80,	/* PCHG2PDEN */
+	0x84,	/* ACT2PDEN */
+	0x88,	/* AR2PDEN */
+	0x8c,	/* RW2PDEN */
+	0x90,	/* TXSR */
+	0x94,	/* TCKE */
+	0x98,	/* TFAW */
+	0x9c,	/* TRPAB */
+	0xa0,	/* TCLKSTABLE */
+	0xa4,	/* TCLKSTOP */
+	0xa8,	/* TREFBW */
+	0xac,	/* QUSE_EXTRA */
+	0x114,	/* FBIO_CFG6 */
+	0xb0,	/* ODT_WRITE */
+	0xb4,	/* ODT_READ */
+	0x104,	/* FBIO_CFG5 */
+	0x2bc,	/* CFG_DIG_DLL */
+	0x2c0,	/* DLL_XFORM_DQS */
+	0x2c4,	/* DLL_XFORM_QUSE */
+	0x2e0,	/* ZCAL_REF_CNT */
+	0x2e4,	/* ZCAL_WAIT_CNT */
+	0x2a8,	/* AUTO_CAL_INTERVAL */
+	0x2d0,	/* CFG_CLKTRIM_0 */
+	0x2d4,	/* CFG_CLKTRIM_1 */
+	0x2d8,	/* CFG_CLKTRIM_2 */
+};
+
+struct emc_ctlr *emc_get_controller(const void *blob)
+{
+	fdt_addr_t addr;
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC);
+	if (node > 0) {
+		addr = fdtdec_get_addr(blob, node, "reg");
+		if (addr != FDT_ADDR_T_NONE)
+			return (struct emc_ctlr *)addr;
+	}
+	return NULL;
+}
+
+/* Error codes we use */
+enum {
+	ERR_NO_EMC_NODE = -10,
+	ERR_NO_EMC_REG,
+	ERR_NO_FREQ,
+	ERR_FREQ_NOT_FOUND,
+	ERR_BAD_REGS,
+	ERR_NO_RAM_CODE,
+	ERR_RAM_CODE_NOT_FOUND,
+};
+
+/**
+ * Find EMC tables for the given ram code.
+ *
+ * The tegra EMC binding has two options, one using the ram code and one not.
+ * We detect which is in use by looking for the nvidia,use-ram-code property.
+ * If this is not present, then the EMC tables are directly below 'node',
+ * otherwise we select the correct emc-tables subnode based on the 'ram_code'
+ * value.
+ *
+ * @param blob		Device tree blob
+ * @param node		EMC node (nvidia,tegra20-emc compatible string)
+ * @param ram_code	RAM code to select (0-3, or -1 if unknown)
+ * @return 0 if ok, otherwise a -ve ERR_ code (see enum above)
+ */
+static int find_emc_tables(const void *blob, int node, int ram_code)
+{
+	int need_ram_code;
+	int depth;
+	int offset;
+
+	/* If we are using RAM codes, scan through the tables for our code */
+	need_ram_code = fdtdec_get_bool(blob, node, "nvidia,use-ram-code");
+	if (!need_ram_code)
+		return node;
+	if (ram_code == -1) {
+		debug("%s: RAM code required but not supplied\n", __func__);
+		return ERR_NO_RAM_CODE;
+	}
+
+	offset = node;
+	depth = 0;
+	do {
+		/*
+		 * Sadly there is no compatible string so we cannot use
+		 * fdtdec_next_compatible_subnode().
+		 */
+		offset = fdt_next_node(blob, offset, &depth);
+		if (depth <= 0)
+			break;
+
+		/* Make sure this is a direct subnode */
+		if (depth != 1)
+			continue;
+		if (strcmp("emc-tables", fdt_get_name(blob, offset, NULL)))
+			continue;
+
+		if (fdtdec_get_int(blob, offset, "nvidia,ram-code", -1)
+				== ram_code)
+			return offset;
+	} while (1);
+
+	debug("%s: Could not find tables for RAM code %d\n", __func__,
+	      ram_code);
+	return ERR_RAM_CODE_NOT_FOUND;
+}
+
+/**
+ * Decode the EMC node of the device tree, returning a pointer to the emc
+ * controller and the table to be used for the given rate.
+ *
+ * @param blob	Device tree blob
+ * @param rate	Clock speed of memory controller in Hz (=2x memory bus rate)
+ * @param emcp	Returns address of EMC controller registers
+ * @param tablep Returns pointer to table to program into EMC. There are
+ *		TEGRA_EMC_NUM_REGS entries, destined for offsets as per the
+ *		emc_reg_addr array.
+ * @return 0 if ok, otherwise a -ve error code which will allow someone to
+ * figure out roughly what went wrong by looking at this code.
+ */
+static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp,
+		      const u32 **tablep)
+{
+	struct apb_misc_pp_ctlr *pp =
+		(struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
+	int ram_code;
+	int depth;
+	int node;
+
+	ram_code = (readl(&pp->strapping_opt_a) & RAM_CODE_MASK)
+			>> RAM_CODE_SHIFT;
+	/*
+	 * The EMC clock rate is twice the bus rate, and the bus rate is
+	 * measured in kHz
+	 */
+	rate = rate / 2 / 1000;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC);
+	if (node < 0) {
+		debug("%s: No EMC node found in FDT\n", __func__);
+		return ERR_NO_EMC_NODE;
+	}
+	*emcp = (struct emc_ctlr *)fdtdec_get_addr(blob, node, "reg");
+	if (*emcp == (struct emc_ctlr *)FDT_ADDR_T_NONE) {
+		debug("%s: No EMC node reg property\n", __func__);
+		return ERR_NO_EMC_REG;
+	}
+
+	/* Work out the parent node which contains our EMC tables */
+	node = find_emc_tables(blob, node, ram_code & 3);
+	if (node < 0)
+		return node;
+
+	depth = 0;
+	for (;;) {
+		int node_rate;
+
+		node = fdtdec_next_compatible_subnode(blob, node,
+				COMPAT_NVIDIA_TEGRA20_EMC_TABLE, &depth);
+		if (node < 0)
+			break;
+		node_rate = fdtdec_get_int(blob, node, "clock-frequency", -1);
+		if (node_rate == -1) {
+			debug("%s: Missing clock-frequency\n", __func__);
+			return ERR_NO_FREQ; /* we expect this property */
+		}
+
+		if (node_rate == rate)
+			break;
+	}
+	if (node < 0) {
+		debug("%s: No node found for clock frequency %d\n", __func__,
+		      rate);
+		return ERR_FREQ_NOT_FOUND;
+	}
+
+	*tablep = fdtdec_locate_array(blob, node, "nvidia,emc-registers",
+				      TEGRA_EMC_NUM_REGS);
+	if (!*tablep) {
+		debug("%s: node '%s' array missing / wrong size\n", __func__,
+		      fdt_get_name(blob, node, NULL));
+		return ERR_BAD_REGS;
+	}
+
+	/* All seems well */
+	return 0;
+}
+
+int tegra_set_emc(const void *blob, unsigned rate)
+{
+	struct emc_ctlr *emc;
+	const u32 *table = NULL;
+	int err, i;
+
+	err = decode_emc(blob, rate, &emc, &table);
+	if (err) {
+		debug("Warning: no valid EMC (%d), memory timings unset\n",
+		       err);
+		return err;
+	}
+
+	debug("%s: Table found, setting EMC values as follows:\n", __func__);
+	for (i = 0; i < TEGRA_EMC_NUM_REGS; i++) {
+		u32 value = fdt32_to_cpu(table[i]);
+		u32 addr = (uintptr_t)emc + emc_reg_addr[i];
+
+		debug("   %#x: %#x\n", addr, value);
+		writel(value, addr);
+	}
+
+	/* trigger emc with new settings */
+	clock_adjust_periph_pll_div(PERIPH_ID_EMC, CLOCK_ID_MEMORY,
+				clock_get_rate(CLOCK_ID_MEMORY), NULL);
+	debug("EMC clock set to %lu\n",
+	      clock_get_periph_rate(PERIPH_ID_EMC, CLOCK_ID_MEMORY));
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/funcmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/funcmux.c
new file mode 100644
index 000000000..90fe0cba8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/funcmux.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+/* Tegra20 high-level function multiplexing */
+#include <common.h>
+#include <log.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+/*
+ * The PINMUX macro is used to set up pinmux tables.
+ */
+#define PINMUX(grp, mux, pupd, tri)                   \
+	{PMUX_PINGRP_##grp, PMUX_FUNC_##mux, PMUX_PULL_##pupd, PMUX_TRI_##tri}
+
+static const struct pmux_pingrp_config disp1_default[] = {
+	PINMUX(LDI,   DISPA,      NORMAL,    NORMAL),
+	PINMUX(LHP0,  DISPA,      NORMAL,    NORMAL),
+	PINMUX(LHP1,  DISPA,      NORMAL,    NORMAL),
+	PINMUX(LHP2,  DISPA,      NORMAL,    NORMAL),
+	PINMUX(LHS,   DISPA,      NORMAL,    NORMAL),
+	PINMUX(LM0,   RSVD4,      NORMAL,    NORMAL),
+	PINMUX(LPP,   DISPA,      NORMAL,    NORMAL),
+	PINMUX(LPW0,  DISPA,      NORMAL,    NORMAL),
+	PINMUX(LPW2,  DISPA,      NORMAL,    NORMAL),
+	PINMUX(LSC0,  DISPA,      NORMAL,    NORMAL),
+	PINMUX(LSPI,  DISPA,      NORMAL,    NORMAL),
+	PINMUX(LVP1,  DISPA,      NORMAL,    NORMAL),
+	PINMUX(LVS,   DISPA,      NORMAL,    NORMAL),
+	PINMUX(SLXD,  SPDIF,      NORMAL,    NORMAL),
+};
+
+
+int funcmux_select(enum periph_id id, int config)
+{
+	int bad_config = config != FUNCMUX_DEFAULT;
+
+	switch (id) {
+	case PERIPH_ID_UART1:
+		switch (config) {
+		case FUNCMUX_UART1_IRRX_IRTX:
+			pinmux_set_func(PMUX_PINGRP_IRRX, PMUX_FUNC_UARTA);
+			pinmux_set_func(PMUX_PINGRP_IRTX, PMUX_FUNC_UARTA);
+			pinmux_tristate_disable(PMUX_PINGRP_IRRX);
+			pinmux_tristate_disable(PMUX_PINGRP_IRTX);
+			break;
+		case FUNCMUX_UART1_UAA_UAB:
+			pinmux_set_func(PMUX_PINGRP_UAA, PMUX_FUNC_UARTA);
+			pinmux_set_func(PMUX_PINGRP_UAB, PMUX_FUNC_UARTA);
+			pinmux_tristate_disable(PMUX_PINGRP_UAA);
+			pinmux_tristate_disable(PMUX_PINGRP_UAB);
+			bad_config = 0;
+			break;
+		case FUNCMUX_UART1_GPU:
+			pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_UARTA);
+			pinmux_tristate_disable(PMUX_PINGRP_GPU);
+			bad_config = 0;
+			break;
+		case FUNCMUX_UART1_SDIO1:
+			pinmux_set_func(PMUX_PINGRP_SDIO1, PMUX_FUNC_UARTA);
+			pinmux_tristate_disable(PMUX_PINGRP_SDIO1);
+			bad_config = 0;
+			break;
+		}
+		if (!bad_config) {
+			/*
+			 * Tegra appears to boot with function UARTA pre-
+			 * selected on mux group SDB. If two mux groups are
+			 * both set to the same function, it's unclear which
+			 * group's pins drive the RX signals into the HW.
+			 * For UARTA, SDB certainly overrides group IRTX in
+			 * practice. To solve this, configure some alternative
+			 * function on SDB to avoid the conflict. Also, tri-
+			 * state the group to avoid driving any signal onto it
+			 * until we know what's connected.
+			 */
+			pinmux_tristate_enable(PMUX_PINGRP_SDB);
+			pinmux_set_func(PMUX_PINGRP_SDB,  PMUX_FUNC_SDIO3);
+		}
+		break;
+
+	case PERIPH_ID_UART2:
+		if (config == FUNCMUX_UART2_UAD) {
+			pinmux_set_func(PMUX_PINGRP_UAD, PMUX_FUNC_UARTB);
+			pinmux_tristate_disable(PMUX_PINGRP_UAD);
+		}
+		break;
+
+	case PERIPH_ID_UART4:
+		if (config == FUNCMUX_UART4_GMC) {
+			pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_UARTD);
+			pinmux_tristate_disable(PMUX_PINGRP_GMC);
+		}
+		break;
+
+	case PERIPH_ID_DVC_I2C:
+		/* there is only one selection, pinmux_config is ignored */
+		if (config == FUNCMUX_DVC_I2CP) {
+			pinmux_set_func(PMUX_PINGRP_I2CP, PMUX_FUNC_I2C);
+			pinmux_tristate_disable(PMUX_PINGRP_I2CP);
+		}
+		break;
+
+	case PERIPH_ID_I2C1:
+		/* support pinmux_config of 0 for now, */
+		if (config == FUNCMUX_I2C1_RM) {
+			pinmux_set_func(PMUX_PINGRP_RM, PMUX_FUNC_I2C);
+			pinmux_tristate_disable(PMUX_PINGRP_RM);
+		}
+		break;
+	case PERIPH_ID_I2C2: /* I2C2 */
+		switch (config) {
+		case FUNCMUX_I2C2_DDC:	/* DDC pin group, select I2C2 */
+			pinmux_set_func(PMUX_PINGRP_DDC, PMUX_FUNC_I2C2);
+			/* PTA to HDMI */
+			pinmux_set_func(PMUX_PINGRP_PTA, PMUX_FUNC_HDMI);
+			pinmux_tristate_disable(PMUX_PINGRP_DDC);
+			break;
+		case FUNCMUX_I2C2_PTA:	/* PTA pin group, select I2C2 */
+			pinmux_set_func(PMUX_PINGRP_PTA, PMUX_FUNC_I2C2);
+			/* set DDC_SEL to RSVDx (RSVD2 works for now) */
+			pinmux_set_func(PMUX_PINGRP_DDC, PMUX_FUNC_RSVD2);
+			pinmux_tristate_disable(PMUX_PINGRP_PTA);
+			bad_config = 0;
+			break;
+		}
+		break;
+	case PERIPH_ID_I2C3: /* I2C3 */
+		/* support pinmux_config of 0 for now */
+		if (config == FUNCMUX_I2C3_DTF) {
+			pinmux_set_func(PMUX_PINGRP_DTF, PMUX_FUNC_I2C3);
+			pinmux_tristate_disable(PMUX_PINGRP_DTF);
+		}
+		break;
+
+	case PERIPH_ID_SDMMC1:
+		if (config == FUNCMUX_SDMMC1_SDIO1_4BIT) {
+			pinmux_set_func(PMUX_PINGRP_SDIO1, PMUX_FUNC_SDIO1);
+			pinmux_tristate_disable(PMUX_PINGRP_SDIO1);
+		}
+		break;
+
+	case PERIPH_ID_SDMMC2:
+		if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) {
+			pinmux_set_func(PMUX_PINGRP_DTA, PMUX_FUNC_SDIO2);
+			pinmux_set_func(PMUX_PINGRP_DTD, PMUX_FUNC_SDIO2);
+
+			pinmux_tristate_disable(PMUX_PINGRP_DTA);
+			pinmux_tristate_disable(PMUX_PINGRP_DTD);
+		}
+		break;
+
+	case PERIPH_ID_SDMMC3:
+		switch (config) {
+		case FUNCMUX_SDMMC3_SDB_SLXA_8BIT:
+			pinmux_set_func(PMUX_PINGRP_SLXA, PMUX_FUNC_SDIO3);
+			pinmux_set_func(PMUX_PINGRP_SLXC, PMUX_FUNC_SDIO3);
+			pinmux_set_func(PMUX_PINGRP_SLXD, PMUX_FUNC_SDIO3);
+			pinmux_set_func(PMUX_PINGRP_SLXK, PMUX_FUNC_SDIO3);
+
+			pinmux_tristate_disable(PMUX_PINGRP_SLXA);
+			pinmux_tristate_disable(PMUX_PINGRP_SLXC);
+			pinmux_tristate_disable(PMUX_PINGRP_SLXD);
+			pinmux_tristate_disable(PMUX_PINGRP_SLXK);
+			/* fall through */
+
+		case FUNCMUX_SDMMC3_SDB_4BIT:
+			pinmux_set_func(PMUX_PINGRP_SDB, PMUX_FUNC_SDIO3);
+			pinmux_set_func(PMUX_PINGRP_SDC, PMUX_FUNC_SDIO3);
+			pinmux_set_func(PMUX_PINGRP_SDD, PMUX_FUNC_SDIO3);
+
+			pinmux_tristate_disable(PMUX_PINGRP_SDB);
+			pinmux_tristate_disable(PMUX_PINGRP_SDC);
+			pinmux_tristate_disable(PMUX_PINGRP_SDD);
+			bad_config = 0;
+			break;
+		}
+		break;
+
+	case PERIPH_ID_SDMMC4:
+		switch (config) {
+		case FUNCMUX_SDMMC4_ATC_ATD_8BIT:
+			pinmux_set_func(PMUX_PINGRP_ATC, PMUX_FUNC_SDIO4);
+			pinmux_set_func(PMUX_PINGRP_ATD, PMUX_FUNC_SDIO4);
+
+			pinmux_tristate_disable(PMUX_PINGRP_ATC);
+			pinmux_tristate_disable(PMUX_PINGRP_ATD);
+			break;
+
+		case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT:
+			pinmux_set_func(PMUX_PINGRP_GME, PMUX_FUNC_SDIO4);
+			pinmux_tristate_disable(PMUX_PINGRP_GME);
+			/* fall through */
+
+		case FUNCMUX_SDMMC4_ATB_GMA_4_BIT:
+			pinmux_set_func(PMUX_PINGRP_ATB, PMUX_FUNC_SDIO4);
+			pinmux_set_func(PMUX_PINGRP_GMA, PMUX_FUNC_SDIO4);
+
+			pinmux_tristate_disable(PMUX_PINGRP_ATB);
+			pinmux_tristate_disable(PMUX_PINGRP_GMA);
+			bad_config = 0;
+			break;
+		}
+		break;
+
+	case PERIPH_ID_KBC:
+		if (config == FUNCMUX_DEFAULT) {
+			enum pmux_pingrp grp[] = {PMUX_PINGRP_KBCA,
+				PMUX_PINGRP_KBCB, PMUX_PINGRP_KBCC,
+				PMUX_PINGRP_KBCD, PMUX_PINGRP_KBCE,
+				PMUX_PINGRP_KBCF};
+			int i;
+
+			for (i = 0; i < ARRAY_SIZE(grp); i++) {
+				pinmux_tristate_disable(grp[i]);
+				pinmux_set_func(grp[i], PMUX_FUNC_KBC);
+				pinmux_set_pullupdown(grp[i], PMUX_PULL_UP);
+			}
+		}
+		break;
+
+	case PERIPH_ID_USB2:
+		if (config == FUNCMUX_USB2_ULPI) {
+			pinmux_set_func(PMUX_PINGRP_UAA, PMUX_FUNC_ULPI);
+			pinmux_set_func(PMUX_PINGRP_UAB, PMUX_FUNC_ULPI);
+			pinmux_set_func(PMUX_PINGRP_UDA, PMUX_FUNC_ULPI);
+
+			pinmux_tristate_disable(PMUX_PINGRP_UAA);
+			pinmux_tristate_disable(PMUX_PINGRP_UAB);
+			pinmux_tristate_disable(PMUX_PINGRP_UDA);
+		}
+		break;
+
+	case PERIPH_ID_SPI1:
+		if (config == FUNCMUX_SPI1_GMC_GMD) {
+			pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH);
+			pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH);
+
+			pinmux_tristate_disable(PMUX_PINGRP_GMC);
+			pinmux_tristate_disable(PMUX_PINGRP_GMD);
+		}
+		break;
+
+	case PERIPH_ID_NDFLASH:
+		switch (config) {
+		case FUNCMUX_NDFLASH_ATC:
+			pinmux_set_func(PMUX_PINGRP_ATC, PMUX_FUNC_NAND);
+			pinmux_tristate_disable(PMUX_PINGRP_ATC);
+			break;
+		case FUNCMUX_NDFLASH_KBC_8_BIT:
+			pinmux_set_func(PMUX_PINGRP_KBCA, PMUX_FUNC_NAND);
+			pinmux_set_func(PMUX_PINGRP_KBCB, PMUX_FUNC_NAND);
+			pinmux_set_func(PMUX_PINGRP_KBCC, PMUX_FUNC_NAND);
+			pinmux_set_func(PMUX_PINGRP_KBCD, PMUX_FUNC_NAND);
+			pinmux_set_func(PMUX_PINGRP_KBCE, PMUX_FUNC_NAND);
+			pinmux_set_func(PMUX_PINGRP_KBCF, PMUX_FUNC_NAND);
+
+			pinmux_tristate_disable(PMUX_PINGRP_KBCA);
+			pinmux_tristate_disable(PMUX_PINGRP_KBCB);
+			pinmux_tristate_disable(PMUX_PINGRP_KBCC);
+			pinmux_tristate_disable(PMUX_PINGRP_KBCD);
+			pinmux_tristate_disable(PMUX_PINGRP_KBCE);
+			pinmux_tristate_disable(PMUX_PINGRP_KBCF);
+
+			bad_config = 0;
+			break;
+		}
+		break;
+	case PERIPH_ID_DISP1:
+		if (config == FUNCMUX_DEFAULT) {
+			int i;
+
+			for (i = PMUX_PINGRP_LD0; i <= PMUX_PINGRP_LD17; i++) {
+				pinmux_set_func(i, PMUX_FUNC_DISPA);
+				pinmux_tristate_disable(i);
+				pinmux_set_pullupdown(i, PMUX_PULL_NORMAL);
+			}
+			pinmux_config_pingrp_table(disp1_default,
+						   ARRAY_SIZE(disp1_default));
+		}
+		break;
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/pinmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/pinmux.c
new file mode 100644
index 000000000..0af39e74c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/pinmux.c
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ */
+
+/* Tegra20 pin multiplexing functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+
+/*
+ * This defines the order of the pin mux control bits in the registers. For
+ * some reason there is no correspendence between the tristate, pin mux and
+ * pullup/pulldown registers.
+ */
+enum pmux_ctlid {
+	/* 0: APB_MISC_PP_PIN_MUX_CTL_A_0 */
+	MUXCTL_UAA,
+	MUXCTL_UAB,
+	MUXCTL_UAC,
+	MUXCTL_UAD,
+	MUXCTL_UDA,
+	MUXCTL_RESERVED5,
+	MUXCTL_ATE,
+	MUXCTL_RM,
+
+	MUXCTL_ATB,
+	MUXCTL_RESERVED9,
+	MUXCTL_ATD,
+	MUXCTL_ATC,
+	MUXCTL_ATA,
+	MUXCTL_KBCF,
+	MUXCTL_KBCE,
+	MUXCTL_SDMMC1,
+
+	/* 16: APB_MISC_PP_PIN_MUX_CTL_B_0 */
+	MUXCTL_GMA,
+	MUXCTL_GMC,
+	MUXCTL_HDINT,
+	MUXCTL_SLXA,
+	MUXCTL_OWC,
+	MUXCTL_SLXC,
+	MUXCTL_SLXD,
+	MUXCTL_SLXK,
+
+	MUXCTL_UCA,
+	MUXCTL_UCB,
+	MUXCTL_DTA,
+	MUXCTL_DTB,
+	MUXCTL_RESERVED28,
+	MUXCTL_DTC,
+	MUXCTL_DTD,
+	MUXCTL_DTE,
+
+	/* 32: APB_MISC_PP_PIN_MUX_CTL_C_0 */
+	MUXCTL_DDC,
+	MUXCTL_CDEV1,
+	MUXCTL_CDEV2,
+	MUXCTL_CSUS,
+	MUXCTL_I2CP,
+	MUXCTL_KBCA,
+	MUXCTL_KBCB,
+	MUXCTL_KBCC,
+
+	MUXCTL_IRTX,
+	MUXCTL_IRRX,
+	MUXCTL_DAP1,
+	MUXCTL_DAP2,
+	MUXCTL_DAP3,
+	MUXCTL_DAP4,
+	MUXCTL_GMB,
+	MUXCTL_GMD,
+
+	/* 48: APB_MISC_PP_PIN_MUX_CTL_D_0 */
+	MUXCTL_GME,
+	MUXCTL_GPV,
+	MUXCTL_GPU,
+	MUXCTL_SPDO,
+	MUXCTL_SPDI,
+	MUXCTL_SDB,
+	MUXCTL_SDC,
+	MUXCTL_SDD,
+
+	MUXCTL_SPIH,
+	MUXCTL_SPIG,
+	MUXCTL_SPIF,
+	MUXCTL_SPIE,
+	MUXCTL_SPID,
+	MUXCTL_SPIC,
+	MUXCTL_SPIB,
+	MUXCTL_SPIA,
+
+	/* 64: APB_MISC_PP_PIN_MUX_CTL_E_0 */
+	MUXCTL_LPW0,
+	MUXCTL_LPW1,
+	MUXCTL_LPW2,
+	MUXCTL_LSDI,
+	MUXCTL_LSDA,
+	MUXCTL_LSPI,
+	MUXCTL_LCSN,
+	MUXCTL_LDC,
+
+	MUXCTL_LSCK,
+	MUXCTL_LSC0,
+	MUXCTL_LSC1,
+	MUXCTL_LHS,
+	MUXCTL_LVS,
+	MUXCTL_LM0,
+	MUXCTL_LM1,
+	MUXCTL_LVP0,
+
+	/* 80: APB_MISC_PP_PIN_MUX_CTL_F_0 */
+	MUXCTL_LD0,
+	MUXCTL_LD1,
+	MUXCTL_LD2,
+	MUXCTL_LD3,
+	MUXCTL_LD4,
+	MUXCTL_LD5,
+	MUXCTL_LD6,
+	MUXCTL_LD7,
+
+	MUXCTL_LD8,
+	MUXCTL_LD9,
+	MUXCTL_LD10,
+	MUXCTL_LD11,
+	MUXCTL_LD12,
+	MUXCTL_LD13,
+	MUXCTL_LD14,
+	MUXCTL_LD15,
+
+	/* 96: APB_MISC_PP_PIN_MUX_CTL_G_0 */
+	MUXCTL_LD16,
+	MUXCTL_LD17,
+	MUXCTL_LHP1,
+	MUXCTL_LHP2,
+	MUXCTL_LVP1,
+	MUXCTL_LHP0,
+	MUXCTL_RESERVED102,
+	MUXCTL_LPP,
+
+	MUXCTL_LDI,
+	MUXCTL_PMC,
+	MUXCTL_CRTP,
+	MUXCTL_PTA,
+	MUXCTL_RESERVED108,
+	MUXCTL_KBCD,
+	MUXCTL_GPU7,
+	MUXCTL_DTF,
+
+	MUXCTL_NONE = -1,
+};
+
+/*
+ * And this defines the order of the pullup/pulldown controls which are again
+ * in a different order
+ */
+enum pmux_pullid {
+	/* 0: APB_MISC_PP_PULLUPDOWN_REG_A_0 */
+	PUCTL_ATA,
+	PUCTL_ATB,
+	PUCTL_ATC,
+	PUCTL_ATD,
+	PUCTL_ATE,
+	PUCTL_DAP1,
+	PUCTL_DAP2,
+	PUCTL_DAP3,
+
+	PUCTL_DAP4,
+	PUCTL_DTA,
+	PUCTL_DTB,
+	PUCTL_DTC,
+	PUCTL_DTD,
+	PUCTL_DTE,
+	PUCTL_DTF,
+	PUCTL_GPV,
+
+	/* 16: APB_MISC_PP_PULLUPDOWN_REG_B_0 */
+	PUCTL_RM,
+	PUCTL_I2CP,
+	PUCTL_PTA,
+	PUCTL_GPU7,
+	PUCTL_KBCA,
+	PUCTL_KBCB,
+	PUCTL_KBCC,
+	PUCTL_KBCD,
+
+	PUCTL_SPDI,
+	PUCTL_SPDO,
+	PUCTL_GPSLXAU,
+	PUCTL_CRTP,
+	PUCTL_SLXC,
+	PUCTL_SLXD,
+	PUCTL_SLXK,
+
+	/* 32: APB_MISC_PP_PULLUPDOWN_REG_C_0 */
+	PUCTL_CDEV1,
+	PUCTL_CDEV2,
+	PUCTL_SPIA,
+	PUCTL_SPIB,
+	PUCTL_SPIC,
+	PUCTL_SPID,
+	PUCTL_SPIE,
+	PUCTL_SPIF,
+
+	PUCTL_SPIG,
+	PUCTL_SPIH,
+	PUCTL_IRTX,
+	PUCTL_IRRX,
+	PUCTL_GME,
+	PUCTL_RESERVED45,
+	PUCTL_XM2D,
+	PUCTL_XM2C,
+
+	/* 48: APB_MISC_PP_PULLUPDOWN_REG_D_0 */
+	PUCTL_UAA,
+	PUCTL_UAB,
+	PUCTL_UAC,
+	PUCTL_UAD,
+	PUCTL_UCA,
+	PUCTL_UCB,
+	PUCTL_LD17,
+	PUCTL_LD19_18,
+
+	PUCTL_LD21_20,
+	PUCTL_LD23_22,
+	PUCTL_LS,
+	PUCTL_LC,
+	PUCTL_CSUS,
+	PUCTL_DDRC,
+	PUCTL_SDC,
+	PUCTL_SDD,
+
+	/* 64: APB_MISC_PP_PULLUPDOWN_REG_E_0 */
+	PUCTL_KBCF,
+	PUCTL_KBCE,
+	PUCTL_PMCA,
+	PUCTL_PMCB,
+	PUCTL_PMCC,
+	PUCTL_PMCD,
+	PUCTL_PMCE,
+	PUCTL_CK32,
+
+	PUCTL_UDA,
+	PUCTL_SDMMC1,
+	PUCTL_GMA,
+	PUCTL_GMB,
+	PUCTL_GMC,
+	PUCTL_GMD,
+	PUCTL_DDC,
+	PUCTL_OWC,
+
+	PUCTL_NONE = -1
+};
+
+/* Convenient macro for defining pin group properties */
+#define PINALL(pingrp, f0, f1, f2, f3, mux, pupd)	\
+	{						\
+		.funcs = {				\
+			PMUX_FUNC_ ## f0,		\
+			PMUX_FUNC_ ## f1,		\
+			PMUX_FUNC_ ## f2,		\
+			PMUX_FUNC_ ## f3,		\
+		},					\
+		.ctl_id = mux,				\
+		.pull_id = pupd				\
+	}
+
+/* A normal pin group where the mux name and pull-up name match */
+#define PIN(pingrp, f0, f1, f2, f3) \
+	PINALL(pingrp, f0, f1, f2, f3, MUXCTL_##pingrp, PUCTL_##pingrp)
+
+/* A pin group where the pull-up name doesn't have a 1-1 mapping */
+#define PINP(pingrp, f0, f1, f2, f3, pupd) \
+	PINALL(pingrp, f0, f1, f2, f3, MUXCTL_##pingrp, PUCTL_##pupd)
+
+/* A pin group number which is not used */
+#define PIN_RESERVED \
+	PIN(NONE, RSVD1, RSVD2, RSVD3, RSVD4)
+
+#define DRVGRP(drvgrp) \
+	PINALL(drvgrp, RSVD1, RSVD2, RSVD3, RSVD4, MUXCTL_NONE, PUCTL_NONE)
+
+static const struct pmux_pingrp_desc tegra20_pingroups[] = {
+	PIN(ATA,    IDE,       NAND,      GMI,       RSVD4),
+	PIN(ATB,    IDE,       NAND,      GMI,       SDIO4),
+	PIN(ATC,    IDE,       NAND,      GMI,       SDIO4),
+	PIN(ATD,    IDE,       NAND,      GMI,       SDIO4),
+	PIN(CDEV1,  OSC,       PLLA_OUT,  PLLM_OUT1, AUDIO_SYNC),
+	PIN(CDEV2,  OSC,       AHB_CLK,   APB_CLK,   PLLP_OUT4),
+	PIN(CSUS,   PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK),
+	PIN(DAP1,   DAP1,      RSVD2,     GMI,       SDIO2),
+
+	PIN(DAP2,   DAP2,      TWC,       RSVD3,     GMI),
+	PIN(DAP3,   DAP3,      RSVD2,     RSVD3,     RSVD4),
+	PIN(DAP4,   DAP4,      RSVD2,     GMI,       RSVD4),
+	PIN(DTA,    RSVD1,     SDIO2,     VI,        RSVD4),
+	PIN(DTB,    RSVD1,     RSVD2,     VI,        SPI1),
+	PIN(DTC,    RSVD1,     RSVD2,     VI,        RSVD4),
+	PIN(DTD,    RSVD1,     SDIO2,     VI,        RSVD4),
+	PIN(DTE,    RSVD1,     RSVD2,     VI,        SPI1),
+
+	PINP(GPU,   PWM,       UARTA,     GMI,       RSVD4,         GPSLXAU),
+	PIN(GPV,    PCIE,      RSVD2,     RSVD3,     RSVD4),
+	PIN(I2CP,   I2C,       RSVD2,     RSVD3,     RSVD4),
+	PIN(IRTX,   UARTA,     UARTB,     GMI,       SPI4),
+	PIN(IRRX,   UARTA,     UARTB,     GMI,       SPI4),
+	PIN(KBCB,   KBC,       NAND,      SDIO2,     MIO),
+	PIN(KBCA,   KBC,       NAND,      SDIO2,     EMC_TEST0_DLL),
+	PINP(PMC,   PWR_ON,    PWR_INTR,  RSVD3,     RSVD4,         NONE),
+
+	PIN(PTA,    I2C2,      HDMI,      GMI,       RSVD4),
+	PIN(RM,     I2C,       RSVD2,     RSVD3,     RSVD4),
+	PIN(KBCE,   KBC,       NAND,      OWR,       RSVD4),
+	PIN(KBCF,   KBC,       NAND,      TRACE,     MIO),
+	PIN(GMA,    UARTE,     SPI3,      GMI,       SDIO4),
+	PIN(GMC,    UARTD,     SPI4,      GMI,       SFLASH),
+	PIN(SDMMC1, SDIO1,     RSVD2,     UARTE,     UARTA),
+	PIN(OWC,    OWR,       RSVD2,     RSVD3,     RSVD4),
+
+	PIN(GME,    RSVD1,     DAP5,      GMI,       SDIO4),
+	PIN(SDC,    PWM,       TWC,       SDIO3,     SPI3),
+	PIN(SDD,    UARTA,     PWM,       SDIO3,     SPI3),
+	PIN_RESERVED,
+	PINP(SLXA,  PCIE,      SPI4,      SDIO3,     SPI2,          CRTP),
+	PIN(SLXC,   SPDIF,     SPI4,      SDIO3,     SPI2),
+	PIN(SLXD,   SPDIF,     SPI4,      SDIO3,     SPI2),
+	PIN(SLXK,   PCIE,      SPI4,      SDIO3,     SPI2),
+
+	PIN(SPDI,   SPDIF,     RSVD2,     I2C,       SDIO2),
+	PIN(SPDO,   SPDIF,     RSVD2,     I2C,       SDIO2),
+	PIN(SPIA,   SPI1,      SPI2,      SPI3,      GMI),
+	PIN(SPIB,   SPI1,      SPI2,      SPI3,      GMI),
+	PIN(SPIC,   SPI1,      SPI2,      SPI3,      GMI),
+	PIN(SPID,   SPI2,      SPI1,      SPI2_ALT,  GMI),
+	PIN(SPIE,   SPI2,      SPI1,      SPI2_ALT,  GMI),
+	PIN(SPIF,   SPI3,      SPI1,      SPI2,      RSVD4),
+
+	PIN(SPIG,   SPI3,      SPI2,      SPI2_ALT,  I2C),
+	PIN(SPIH,   SPI3,      SPI2,      SPI2_ALT,  I2C),
+	PIN(UAA,    SPI3,      MIPI_HS,   UARTA,     ULPI),
+	PIN(UAB,    SPI2,      MIPI_HS,   UARTA,     ULPI),
+	PIN(UAC,    OWR,       RSVD2,     RSVD3,     RSVD4),
+	PIN(UAD,    UARTB,     SPDIF,     UARTA,     SPI4),
+	PIN(UCA,    UARTC,     RSVD2,     GMI,       RSVD4),
+	PIN(UCB,    UARTC,     PWM,       GMI,       RSVD4),
+
+	PIN_RESERVED,
+	PIN(ATE,    IDE,       NAND,      GMI,       RSVD4),
+	PIN(KBCC,   KBC,       NAND,      TRACE,     EMC_TEST1_DLL),
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN(GMB,    IDE,       NAND,      GMI,       GMI_INT),
+	PIN(GMD,    RSVD1,     NAND,      GMI,       SFLASH),
+	PIN(DDC,    I2C2,      RSVD2,     RSVD3,     RSVD4),
+
+	/* 64 */
+	PINP(LD0,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD1,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD2,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD3,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD4,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD5,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD6,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD7,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+
+	PINP(LD8,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD9,   DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD10,  DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD11,  DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD12,  DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD13,  DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD14,  DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD15,  DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+
+	PINP(LD16,  DISPA,     DISPB,     XIO,       RSVD4,         LD17),
+	PINP(LD17,  DISPA,     DISPB,     RSVD3,     RSVD4,         LD17),
+	PINP(LHP0,  DISPA,     DISPB,     RSVD3,     RSVD4,         LD21_20),
+	PINP(LHP1,  DISPA,     DISPB,     RSVD3,     RSVD4,         LD19_18),
+	PINP(LHP2,  DISPA,     DISPB,     RSVD3,     RSVD4,         LD19_18),
+	PINP(LVP0,  DISPA,     DISPB,     RSVD3,     RSVD4,         LC),
+	PINP(LVP1,  DISPA,     DISPB,     RSVD3,     RSVD4,         LD21_20),
+	PINP(HDINT, HDMI,      RSVD2,     RSVD3,     RSVD4,         LC),
+
+	PINP(LM0,   DISPA,     DISPB,     SPI3,      RSVD4,         LC),
+	PINP(LM1,   DISPA,     DISPB,     RSVD3,     CRT,           LC),
+	PINP(LVS,   DISPA,     DISPB,     XIO,       RSVD4,         LC),
+	PINP(LSC0,  DISPA,     DISPB,     XIO,       RSVD4,         LC),
+	PINP(LSC1,  DISPA,     DISPB,     SPI3,      HDMI,          LS),
+	PINP(LSCK,  DISPA,     DISPB,     SPI3,      HDMI,          LS),
+	PINP(LDC,   DISPA,     DISPB,     RSVD3,     RSVD4,         LS),
+	PINP(LCSN,  DISPA,     DISPB,     SPI3,      RSVD4,         LS),
+
+	/* 96 */
+	PINP(LSPI,  DISPA,     DISPB,     XIO,       HDMI,          LC),
+	PINP(LSDA,  DISPA,     DISPB,     SPI3,      HDMI,          LS),
+	PINP(LSDI,  DISPA,     DISPB,     SPI3,      RSVD4,         LS),
+	PINP(LPW0,  DISPA,     DISPB,     SPI3,      HDMI,          LS),
+	PINP(LPW1,  DISPA,     DISPB,     RSVD3,     RSVD4,         LS),
+	PINP(LPW2,  DISPA,     DISPB,     SPI3,      HDMI,          LS),
+	PINP(LDI,   DISPA,     DISPB,     RSVD3,     RSVD4,         LD23_22),
+	PINP(LHS,   DISPA,     DISPB,     XIO,       RSVD4,         LC),
+
+	PINP(LPP,   DISPA,     DISPB,     RSVD3,     RSVD4,         LD23_22),
+	PIN_RESERVED,
+	PIN(KBCD,   KBC,       NAND,      SDIO2,     MIO),
+	PIN(GPU7,   RTCK,      RSVD2,     RSVD3,     RSVD4),
+	PIN(DTF,    I2C3,      RSVD2,     VI,        RSVD4),
+	PIN(UDA,    SPI1,      RSVD2,     UARTD,     ULPI),
+	PIN(CRTP,   CRT,       RSVD2,     RSVD3,     RSVD4),
+	PINP(SDB,   UARTA,     PWM,       SDIO3,     SPI2,          NONE),
+
+	/* these pin groups only have pullup and pull down control */
+	DRVGRP(CK32),
+	DRVGRP(DDRC),
+	DRVGRP(PMCA),
+	DRVGRP(PMCB),
+	DRVGRP(PMCC),
+	DRVGRP(PMCD),
+	DRVGRP(PMCE),
+	DRVGRP(XM2C),
+	DRVGRP(XM2D),
+};
+const struct pmux_pingrp_desc *tegra_soc_pingroups = tegra20_pingroups;
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/pmu.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/pmu.c
new file mode 100644
index 000000000..05d0668cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/pmu.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <log.h>
+#include <tps6586x.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include <asm/arch-tegra/sys_proto.h>
+
+#define VDD_CORE_NOMINAL_T25	0x17	/* 1.3v */
+#define VDD_CPU_NOMINAL_T25	0x10	/* 1.125v */
+
+#define VDD_CORE_NOMINAL_T20	0x16	/* 1.275v */
+#define VDD_CPU_NOMINAL_T20	0x0f	/* 1.1v */
+
+#define VDD_RELATION		0x02	/*  50mv */
+#define VDD_TRANSITION_STEP	0x06	/* 150mv */
+#define VDD_TRANSITION_RATE	0x06	/* 3.52mv/us */
+
+#define PMI_I2C_ADDRESS	0x34	/* chip requires this address */
+
+int pmu_set_nominal(void)
+{
+	struct udevice *bus, *dev;
+	int core, cpu;
+	int ret;
+
+	/* by default, the table has been filled with T25 settings */
+	switch (tegra_get_chip_sku()) {
+	case TEGRA_SOC_T20:
+		core = VDD_CORE_NOMINAL_T20;
+		cpu = VDD_CPU_NOMINAL_T20;
+		break;
+	case TEGRA_SOC_T25:
+		core = VDD_CORE_NOMINAL_T25;
+		cpu = VDD_CPU_NOMINAL_T25;
+		break;
+	default:
+		debug("%s: Unknown SKU id\n", __func__);
+		return -1;
+	}
+
+	ret = tegra_i2c_get_dvc_bus(&bus);
+	if (ret) {
+		debug("%s: Cannot find DVC I2C bus\n", __func__);
+		return ret;
+	}
+	ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, 1, &dev);
+	if (ret) {
+		debug("%s: Cannot find DVC I2C chip\n", __func__);
+		return ret;
+	}
+
+	tps6586x_init(dev);
+	tps6586x_set_pwm_mode(TPS6586X_PWM_SM1);
+	return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP,
+				VDD_TRANSITION_RATE, VDD_RELATION);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot.c
new file mode 100644
index 000000000..3d3758f6e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010 - 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/emc.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sdram_param.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/apb_misc.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/fuse.h>
+#include <asm/arch-tegra/warmboot.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_TEGRA_CLOCK_SCALING
+#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA_LP0"
+#endif
+
+/*
+ * This is the place in SRAM where the SDRAM parameters are stored. There
+ * are 4 blocks, one for each RAM code
+ */
+#define SDRAM_PARAMS_BASE	(NV_PA_BASE_SRAM + 0x188)
+
+/* TODO: If we later add support for the Misc GP controller, refactor this */
+union xm2cfga_reg {
+	struct {
+		u32 reserved0:2;
+		u32 hsm_en:1;
+		u32 reserved1:2;
+		u32 preemp_en:1;
+		u32 vref_en:1;
+		u32 reserved2:5;
+		u32 cal_drvdn:5;
+		u32 reserved3:3;
+		u32 cal_drvup:5;
+		u32 reserved4:3;
+		u32 cal_drvdn_slwr:2;
+		u32 cal_drvup_slwf:2;
+	};
+	u32 word;
+};
+
+union xm2cfgd_reg {
+	struct {
+		u32 reserved0:2;
+		u32 hsm_en:1;
+		u32 schmt_en:1;
+		u32 lpmd:2;
+		u32 vref_en:1;
+		u32 reserved1:5;
+		u32 cal_drvdn:5;
+		u32 reserved2:3;
+		u32 cal_drvup:5;
+		u32 reserved3:3;
+		u32 cal_drvdn_slwr:2;
+		u32 cal_drvup_slwf:2;
+	};
+	u32 word;
+};
+
+/*
+ * TODO: This register is not documented in the TRM yet. We could move this
+ * into the EMC and give it a proper interface, but not while it is
+ * undocumented.
+ */
+union fbio_spare_reg {
+	struct {
+		u32 reserved:24;
+		u32 cfg_wb0:8;
+	};
+	u32 word;
+};
+
+/* We pack the resume information into these unions for later */
+union scratch2_reg {
+	struct {
+		u32 pllm_base_divm:5;
+		u32 pllm_base_divn:10;
+		u32 pllm_base_divp:3;
+		u32 pllm_misc_lfcon:4;
+		u32 pllm_misc_cpcon:4;
+		u32 gp_xm2cfga_padctrl_preemp:1;
+		u32 gp_xm2cfgd_padctrl_schmt:1;
+		u32 osc_ctrl_xobp:1;
+		u32 memory_type:3;
+	};
+	u32 word;
+};
+
+union scratch4_reg {
+	struct {
+		u32 emc_clock_divider:8;
+		u32 pllm_stable_time:8;
+		u32 pllx_stable_time:8;
+		u32 emc_fbio_spare_cfg_wb0:8;
+	};
+	u32 word;
+};
+
+union scratch24_reg {
+	struct {
+		u32 emc_auto_cal_wait:8;
+		u32 emc_pin_program_wait:8;
+		u32 warmboot_wait:8;
+		u32 reserved:8;
+	};
+	u32 word;
+};
+
+int warmboot_save_sdram_params(void)
+{
+	u32 ram_code;
+	struct sdram_params sdram;
+	struct apb_misc_pp_ctlr *apb_misc =
+				(struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	struct apb_misc_gp_ctlr *gp =
+			(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
+	struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob);
+	union scratch2_reg scratch2;
+	union scratch4_reg scratch4;
+	union scratch24_reg scratch24;
+	union xm2cfga_reg xm2cfga;
+	union xm2cfgd_reg xm2cfgd;
+	union fbio_spare_reg fbio_spare;
+
+	/* get ram code that is used as index to array sdram_params in BCT */
+	ram_code = (readl(&apb_misc->strapping_opt_a) >>
+			  STRAP_OPT_A_RAM_CODE_SHIFT) & 3;
+	memcpy(&sdram,
+	       (char *)((struct sdram_params *)SDRAM_PARAMS_BASE + ram_code),
+	       sizeof(sdram));
+
+	xm2cfga.word = readl(&gp->xm2cfga);
+	xm2cfgd.word = readl(&gp->xm2cfgd);
+
+	scratch2.word = 0;
+	scratch2.osc_ctrl_xobp = clock_get_osc_bypass();
+
+	/* Get the memory PLL settings */
+	{
+		u32 divm, divn, divp, cpcon, lfcon;
+
+		if (clock_ll_read_pll(CLOCK_ID_MEMORY, &divm, &divn, &divp,
+					&cpcon, &lfcon))
+			return -1;
+		scratch2.pllm_base_divm = divm;
+		scratch2.pllm_base_divn = divn;
+		scratch2.pllm_base_divp = divp;
+		scratch2.pllm_misc_cpcon = cpcon;
+		scratch2.pllm_misc_lfcon = lfcon;
+	}
+
+	scratch2.gp_xm2cfga_padctrl_preemp = xm2cfga.preemp_en;
+	scratch2.gp_xm2cfgd_padctrl_schmt = xm2cfgd.schmt_en;
+	scratch2.memory_type = sdram.memory_type;
+	writel(scratch2.word, &pmc->pmc_scratch2);
+
+	/* collect data from various sources for pmc_scratch4 */
+	fbio_spare.word = readl(&emc->fbio_spare);
+	scratch4.word = 0;
+	scratch4.emc_fbio_spare_cfg_wb0 = fbio_spare.cfg_wb0;
+	scratch4.emc_clock_divider = sdram.emc_clock_divider;
+	scratch4.pllm_stable_time = -1;
+	scratch4.pllx_stable_time = -1;
+	writel(scratch4.word, &pmc->pmc_scratch4);
+
+	/* collect various data from sdram for pmc_scratch24 */
+	scratch24.word = 0;
+	scratch24.emc_pin_program_wait = sdram.emc_pin_program_wait;
+	scratch24.emc_auto_cal_wait = sdram.emc_auto_cal_wait;
+	scratch24.warmboot_wait = sdram.warm_boot_wait;
+	writel(scratch24.word, &pmc->pmc_scratch24);
+
+	return 0;
+}
+
+static u32 get_major_version(void)
+{
+	u32 major_id;
+	struct apb_misc_gp_ctlr *gp =
+		(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
+
+	major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >>
+			HIDREV_MAJORPREV_SHIFT;
+	return major_id;
+}
+
+static int is_production_mode_fuse_set(struct fuse_regs *fuse)
+{
+	return readl(&fuse->production_mode);
+}
+
+static int is_odm_production_mode_fuse_set(struct fuse_regs *fuse)
+{
+	return readl(&fuse->security_mode);
+}
+
+static int is_failure_analysis_mode(struct fuse_regs *fuse)
+{
+	return readl(&fuse->fa);
+}
+
+static int ap20_is_odm_production_mode(void)
+{
+	struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
+
+	if (!is_failure_analysis_mode(fuse) &&
+	    is_odm_production_mode_fuse_set(fuse))
+		return 1;
+	else
+		return 0;
+}
+
+static int ap20_is_production_mode(void)
+{
+	struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
+
+	if (get_major_version() == 0)
+		return 1;
+
+	if (!is_failure_analysis_mode(fuse) &&
+	    is_production_mode_fuse_set(fuse) &&
+	    !is_odm_production_mode_fuse_set(fuse))
+		return 1;
+	else
+		return 0;
+}
+
+static enum fuse_operating_mode fuse_get_operation_mode(void)
+{
+	u32 chip_id;
+	struct apb_misc_gp_ctlr *gp =
+		(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
+
+	chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >>
+			HIDREV_CHIPID_SHIFT;
+	if (chip_id == CHIPID_TEGRA20) {
+		if (ap20_is_odm_production_mode()) {
+			printf("!! odm_production_mode is not supported !!\n");
+			return MODE_UNDEFINED;
+		} else
+			if (ap20_is_production_mode())
+				return MODE_PRODUCTION;
+			else
+				return MODE_UNDEFINED;
+	}
+	return MODE_UNDEFINED;
+}
+
+static void determine_crypto_options(int *is_encrypted, int *is_signed,
+				     int *use_zero_key)
+{
+	switch (fuse_get_operation_mode()) {
+	case MODE_PRODUCTION:
+		*is_encrypted = 0;
+		*is_signed = 1;
+		*use_zero_key = 1;
+		break;
+	case MODE_UNDEFINED:
+	default:
+		*is_encrypted = 0;
+		*is_signed = 0;
+		*use_zero_key  = 0;
+		break;
+	}
+}
+
+static int sign_wb_code(u32 start, u32 length, int use_zero_key)
+{
+	int err;
+	u8 *source;		/* Pointer to source */
+	u8 *hash;
+
+	/* Calculate AES block parameters. */
+	source = (u8 *)(start + offsetof(struct wb_header, random_aes_block));
+	length -= offsetof(struct wb_header, random_aes_block);
+	hash = (u8 *)(start + offsetof(struct wb_header, hash));
+	err = sign_data_block(source, length, hash);
+
+	return err;
+}
+
+int warmboot_prepare_code(u32 seg_address, u32 seg_length)
+{
+	int err = 0;
+	u32 length;			/* length of the signed/encrypt code */
+	struct wb_header *dst_header;	/* Pointer to dest WB header */
+	int is_encrypted;		/* Segment is encrypted */
+	int is_signed;			/* Segment is signed */
+	int use_zero_key;		/* Use key of all zeros */
+
+	/* Determine crypto options. */
+	determine_crypto_options(&is_encrypted, &is_signed, &use_zero_key);
+
+	/* Get the actual code limits. */
+	length = roundup(((u32)wb_end - (u32)wb_start), 16);
+
+	/*
+	 * The region specified by seg_address must be in SDRAM and must be
+	 * nonzero in length.
+	 */
+	if (seg_length == 0 || seg_address < NV_PA_SDRAM_BASE ||
+		seg_address + seg_length >= NV_PA_SDRAM_BASE + gd->ram_size) {
+		err = -EFAULT;
+		goto fail;
+	}
+
+	/* Things must be 16-byte aligned. */
+	if ((seg_length & 0xF) || (seg_address & 0xF)) {
+		err = -EINVAL;
+		goto fail;
+	}
+
+	/* Will the code fit? (destination includes wb_header + wb code) */
+	if (seg_length < (length + sizeof(struct wb_header))) {
+		err = -EINVAL;
+		goto fail;
+	}
+
+	dst_header = (struct wb_header *)seg_address;
+	memset((char *)dst_header, 0, sizeof(struct wb_header));
+
+	/* Populate the random_aes_block as requested. */
+	{
+		u32 *aes_block = (u32 *)&(dst_header->random_aes_block);
+		u32 *end = (u32 *)(((u32)aes_block) +
+				   sizeof(dst_header->random_aes_block));
+
+		do {
+			*aes_block++ = 0;
+		} while (aes_block < end);
+	}
+
+	/* Populate the header. */
+	dst_header->length_insecure = length + sizeof(struct wb_header);
+	dst_header->length_secure = length + sizeof(struct wb_header);
+	dst_header->destination = NV_WB_RUN_ADDRESS;
+	dst_header->entry_point = NV_WB_RUN_ADDRESS;
+	dst_header->code_length = length;
+
+	if (is_encrypted) {
+		printf("!!!! Encryption is not supported !!!!\n");
+		dst_header->length_insecure = 0;
+		err = -EACCES;
+		goto fail;
+	} else
+		/* copy the wb code directly following dst_header. */
+		memcpy((char *)(dst_header+1), (char *)wb_start, length);
+
+	if (is_signed)
+		err = sign_wb_code(seg_address, dst_header->length_insecure,
+				   use_zero_key);
+
+fail:
+	if (err)
+		printf("Warning: warmboot code copy failed (error=%d)\n", err);
+
+	return err;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot_avp.c b/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot_avp.c
new file mode 100644
index 000000000..be801d108
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot_avp.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010 - 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/apb_misc.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/warmboot.h>
+#include "warmboot_avp.h"
+
+#define DEBUG_RESET_CORESIGHT
+
+void wb_start(void)
+{
+	struct apb_misc_pp_ctlr *apb_misc =
+				(struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	union osc_ctrl_reg osc_ctrl;
+	union pllx_base_reg pllx_base;
+	union pllx_misc_reg pllx_misc;
+	union scratch3_reg scratch3;
+	u32 reg;
+
+	/* enable JTAG & TBE */
+	writel(CONFIG_CTL_TBE | CONFIG_CTL_JTAG, &apb_misc->cfg_ctl);
+
+	/* Are we running where we're supposed to be? */
+	asm volatile (
+		"adr	%0, wb_start;"	/* reg: wb_start address */
+		: "=r"(reg)		/* output */
+					/* no input, no clobber list */
+	);
+
+	if (reg != NV_WB_RUN_ADDRESS)
+		goto do_reset;
+
+	/* Are we running with AVP? */
+	if (readl(NV_PA_PG_UP_BASE + PG_UP_TAG_0) != PG_UP_TAG_AVP)
+		goto do_reset;
+
+#ifdef DEBUG_RESET_CORESIGHT
+	/* Assert CoreSight reset */
+	reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
+	reg |= SWR_CSITE_RST;
+	writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
+#endif
+
+	/* TODO: Set the drive strength - maybe make this a board parameter? */
+	osc_ctrl.word = readl(&clkrst->crc_osc_ctrl);
+	osc_ctrl.xofs = 4;
+	osc_ctrl.xoe = 1;
+	writel(osc_ctrl.word, &clkrst->crc_osc_ctrl);
+
+	/* Power up the CPU complex if necessary */
+	if (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) {
+		reg = PWRGATE_TOGGLE_PARTID_CPU | PWRGATE_TOGGLE_START;
+		writel(reg, &pmc->pmc_pwrgate_toggle);
+		while (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU))
+			;
+	}
+
+	/* Remove the I/O clamps from the CPU power partition. */
+	reg = readl(&pmc->pmc_remove_clamping);
+	reg |= CPU_CLMP;
+	writel(reg, &pmc->pmc_remove_clamping);
+
+	reg = EVENT_ZERO_VAL_20 | EVENT_MSEC | EVENT_MODE_STOP;
+	writel(reg, &flow->halt_cop_events);
+
+	/* Assert CPU complex reset */
+	reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
+	reg |= CPU_RST;
+	writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+
+	/* Hold both CPUs in reset */
+	reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_CPURESET1 | CPU_CMPLX_DERESET0 |
+	      CPU_CMPLX_DERESET1 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DBGRESET1;
+	writel(reg, &clkrst->crc_cpu_cmplx_set);
+
+	/* Halt CPU1 at the flow controller for uni-processor configurations */
+	writel(EVENT_MODE_STOP, &flow->halt_cpu1_events);
+
+	/*
+	 * Set the CPU reset vector. SCRATCH41 contains the physical
+	 * address of the CPU-side restoration code.
+	 */
+	reg = readl(&pmc->pmc_scratch41);
+	writel(reg, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+	/* Select CPU complex clock source */
+	writel(CCLK_PLLP_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+
+	/* Start the CPU0 clock and stop the CPU1 clock */
+	reg = CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 | CPU_CMPLX_CPU0_CLK_STP_RUN |
+	      CPU_CMPLX_CPU1_CLK_STP_STOP;
+	writel(reg, &clkrst->crc_clk_cpu_cmplx);
+
+	/* Enable the CPU complex clock */
+	reg = readl(&clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
+	reg |= CLK_ENB_CPU;
+	writel(reg, &clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
+
+	/* Make sure the resets were held for at least 2 microseconds */
+	reg = readl(TIMER_USEC_CNTR);
+	while (readl(TIMER_USEC_CNTR) <= (reg + 2))
+		;
+
+#ifdef DEBUG_RESET_CORESIGHT
+	/*
+	 * De-assert CoreSight reset.
+	 * NOTE: We're leaving the CoreSight clock on the oscillator for
+	 *	now. It will be restored to its original clock source
+	 *	when the CPU-side restoration code runs.
+	 */
+	reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
+	reg &= ~SWR_CSITE_RST;
+	writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
+#endif
+
+	/* Unlock the CPU CoreSight interfaces */
+	reg = 0xC5ACCE55;
+	writel(reg, CSITE_CPU_DBG0_LAR);
+	writel(reg, CSITE_CPU_DBG1_LAR);
+
+	/*
+	 * Sample the microsecond timestamp again. This is the time we must
+	 * use when returning from LP0 for PLL stabilization delays.
+	 */
+	reg = readl(TIMER_USEC_CNTR);
+	writel(reg, &pmc->pmc_scratch1);
+
+	pllx_base.word = 0;
+	pllx_misc.word = 0;
+	scratch3.word = readl(&pmc->pmc_scratch3);
+
+	/* Get the OSC. For 19.2 MHz, use 19 to make the calculations easier */
+	reg = (readl(TIMER_USEC_CFG) & USEC_CFG_DIVISOR_MASK) + 1;
+
+	/*
+	 * According to the TRM, for 19.2MHz OSC, the USEC_DIVISOR is 0x5f, and
+	 * USEC_DIVIDEND is 0x04. So, if USEC_DIVISOR > 26, OSC is 19.2 MHz.
+	 *
+	 * reg is used to calculate the pllx freq, which is used to determine if
+	 * to set dccon or not.
+	 */
+	if (reg > 26)
+		reg = 19;
+
+	/* PLLX_BASE.PLLX_DIVM */
+	if (scratch3.pllx_base_divm == reg)
+		reg = 0;
+	else
+		reg = 1;
+
+	/* PLLX_BASE.PLLX_DIVN */
+	pllx_base.divn = scratch3.pllx_base_divn;
+	reg = scratch3.pllx_base_divn << reg;
+
+	/* PLLX_BASE.PLLX_DIVP */
+	pllx_base.divp = scratch3.pllx_base_divp;
+	reg = reg >> scratch3.pllx_base_divp;
+
+	pllx_base.bypass = 1;
+
+	/* PLLX_MISC_DCCON must be set for pllx frequency > 600 MHz. */
+	if (reg > 600)
+		pllx_misc.dccon = 1;
+
+	/* PLLX_MISC_LFCON */
+	pllx_misc.lfcon = scratch3.pllx_misc_lfcon;
+
+	/* PLLX_MISC_CPCON */
+	pllx_misc.cpcon = scratch3.pllx_misc_cpcon;
+
+	writel(pllx_misc.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_misc);
+	writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+
+	pllx_base.enable = 1;
+	writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+	pllx_base.bypass = 0;
+	writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+
+	writel(0, flow->halt_cpu_events);
+
+	reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DERESET0;
+	writel(reg, &clkrst->crc_cpu_cmplx_clr);
+
+	reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE |
+	      PLLM_OUT1_RATIO_VAL_8;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out[0]);
+
+	reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 |
+	      SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 |
+	      SCLK_SYS_STATE_IDLE;
+	writel(reg, &clkrst->crc_sclk_brst_pol);
+
+	/* avp_resume: no return after the write */
+	reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
+	reg &= ~CPU_RST;
+	writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+
+	/* avp_halt: */
+avp_halt:
+	reg = EVENT_MODE_STOP | EVENT_JTAG;
+	writel(reg, flow->halt_cop_events);
+	goto avp_halt;
+
+do_reset:
+	/*
+	 * Execution comes here if something goes wrong. The chip is reset and
+	 * a cold boot is performed.
+	 */
+	writel(SWR_TRIG_SYS_RST, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+	goto do_reset;
+}
+
+/*
+ * wb_end() is a dummy function, and must be directly following wb_start(),
+ * and is used to calculate the size of wb_start().
+ */
+void wb_end(void)
+{
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot_avp.h b/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot_avp.h
new file mode 100644
index 000000000..19a476b89
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra20/warmboot_avp.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+#ifndef _WARMBOOT_AVP_H_
+#define _WARMBOOT_AVP_H_
+
+#define TEGRA_DEV_L			0
+#define TEGRA_DEV_H			1
+#define TEGRA_DEV_U			2
+
+#define SIMPLE_PLLX			(CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE)
+#define SIMPLE_PLLE			(CLOCK_ID_EPCI - CLOCK_ID_FIRST_SIMPLE)
+
+#define TIMER_USEC_CNTR			(NV_PA_TMRUS_BASE + 0)
+#define TIMER_USEC_CFG			(NV_PA_TMRUS_BASE + 4)
+
+#define USEC_CFG_DIVISOR_MASK		0xffff
+
+#define CONFIG_CTL_TBE			(1 << 7)
+#define CONFIG_CTL_JTAG			(1 << 6)
+
+#define CPU_RST				(1 << 0)
+#define CLK_ENB_CPU			(1 << 0)
+#define SWR_TRIG_SYS_RST		(1 << 2)
+#define SWR_CSITE_RST			(1 << 9)
+
+#define PWRGATE_STATUS_CPU		(1 << 0)
+#define PWRGATE_TOGGLE_PARTID_CPU	(0 << 0)
+#define PWRGATE_TOGGLE_START		(1 << 8)
+
+#define CPU_CMPLX_CPU_BRIDGE_CLKDIV_4	(3 << 0)
+#define CPU_CMPLX_CPU0_CLK_STP_STOP	(1 << 8)
+#define CPU_CMPLX_CPU0_CLK_STP_RUN	(0 << 8)
+#define CPU_CMPLX_CPU1_CLK_STP_STOP	(1 << 9)
+#define CPU_CMPLX_CPU1_CLK_STP_RUN	(0 << 9)
+
+#define CPU_CMPLX_CPURESET0		(1 << 0)
+#define CPU_CMPLX_CPURESET1		(1 << 1)
+#define CPU_CMPLX_DERESET0		(1 << 4)
+#define CPU_CMPLX_DERESET1		(1 << 5)
+#define CPU_CMPLX_DBGRESET0		(1 << 12)
+#define CPU_CMPLX_DBGRESET1		(1 << 13)
+
+#define PLLM_OUT1_RSTN_RESET_DISABLE	(1 << 0)
+#define PLLM_OUT1_CLKEN_ENABLE		(1 << 1)
+#define PLLM_OUT1_RATIO_VAL_8		(8 << 8)
+
+#define SCLK_SYS_STATE_IDLE		(1 << 28)
+#define SCLK_SWAKE_FIQ_SRC_PLLM_OUT1	(7 << 12)
+#define SCLK_SWAKE_IRQ_SRC_PLLM_OUT1	(7 << 8)
+#define SCLK_SWAKE_RUN_SRC_PLLM_OUT1	(7 << 4)
+#define SCLK_SWAKE_IDLE_SRC_PLLM_OUT1	(7 << 0)
+
+#define EVENT_ZERO_VAL_20		(20 << 0)
+#define EVENT_MSEC			(1 << 24)
+#define EVENT_JTAG			(1 << 28)
+#define EVENT_MODE_STOP			(2 << 29)
+
+#define CCLK_PLLP_BURST_POLICY		0x20004444
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra210/Kconfig b/roms/u-boot/arch/arm/mach-tegra/tegra210/Kconfig
new file mode 100644
index 000000000..17f18cbf3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra210/Kconfig
@@ -0,0 +1,46 @@
+if TEGRA210
+
+choice
+	prompt "Tegra210 board select"
+
+config TARGET_P2371_0000
+	bool "NVIDIA Tegra210 P2371-0000 board"
+	select BOARD_LATE_INIT
+	help
+	  P2371-0000 is a P2581 or P2530 CPU board married to a P2595 I/O
+	  board. The combination contains SoC, DRAM, eMMC, SD card slot,
+	  HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA,
+	  a GPIO expansion header, and an analog audio jack.
+
+config TARGET_P2371_2180
+	bool "NVIDIA Tegra210 P2371-2180 (Jetson TX1) board"
+	select BOARD_LATE_INIT
+	help
+	  P2371-2180 (Jetson TX1 developer kit) is a P2180 CPU board married
+	  to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD
+	  card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host
+	  port, SATA, PCIe, and two GPIO expansion headers.
+
+config TARGET_P2571
+	bool "NVIDIA Tegra210 P2571 base board"
+	select BOARD_LATE_INIT
+	help
+	  P2571 is a P2530 married to a P1963 I/O board
+
+config TARGET_P3450_0000
+	bool "NVIDIA Jetson Nano Developer Kit"
+	select BOARD_LATE_INIT
+	help
+	  P3450-0000 is a P3448 CPU board married to a P3449 I/O board.
+
+endchoice
+
+config SYS_SOC
+	default "tegra210"
+
+source "board/nvidia/p2371-0000/Kconfig"
+source "board/nvidia/p2371-2180/Kconfig"
+source "board/nvidia/p2571/Kconfig"
+source "board/nvidia/p3450-0000/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra210/Makefile b/roms/u-boot/arch/arm/mach-tegra/tegra210/Makefile
new file mode 100644
index 000000000..cfcba5b68
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra210/Makefile
@@ -0,0 +1,11 @@
+#
+# (C) Copyright 2013-2020
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	+= clock.o
+obj-y	+= funcmux.o
+obj-y	+= xusb-padctl.o
+obj-y	+= ../xusb-padctl-common.o
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra210/clock.c b/roms/u-boot/arch/arm/mach-tegra/tegra210/clock.c
new file mode 100644
index 000000000..ccc64eb77
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra210/clock.c
@@ -0,0 +1,1266 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013-2020
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra210 Clock control functions */
+
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+#include <log.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sysctr.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra210 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
+	CLOCK_TYPE_MCPA,	/* and so on */
+	CLOCK_TYPE_MCPT,
+	CLOCK_TYPE_PCM,
+	CLOCK_TYPE_PCMT,
+	CLOCK_TYPE_PDCT,
+	CLOCK_TYPE_ACPT,
+	CLOCK_TYPE_ASPTE,
+	CLOCK_TYPE_PDD2T,
+	CLOCK_TYPE_PCST,
+	CLOCK_TYPE_DP,
+
+	CLOCK_TYPE_PC2CC3M,
+	CLOCK_TYPE_PC2CC3S_T,
+	CLOCK_TYPE_PC2CC3M_T,
+	CLOCK_TYPE_PC2CC3M_T16,	/* PC2CC3M_T, but w/16-bit divisor (I2C) */
+	CLOCK_TYPE_MC2CC3P_A,
+	CLOCK_TYPE_M,
+	CLOCK_TYPE_MCPTM2C2C3,
+	CLOCK_TYPE_PC2CC3T_S,
+	CLOCK_TYPE_AC2CC3P_TS2,
+	CLOCK_TYPE_PC01C00_C42C41TC40,
+
+	CLOCK_TYPE_COUNT,
+	CLOCK_TYPE_NONE = -1,   /* invalid clock type */
+};
+
+enum {
+	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ *  The extra column in each clock source array is used to store the mask
+ *  bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(SFROM32KHZ),	CLK(PERIPH),	CLK(OSC),
+		CLK(EPCI),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(NONE),	CLK(DISPLAY),	CLK(NONE),
+		CLK(NONE),	CLK(DISPLAY2),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_28},
+	/* CLOCK_TYPE_DP */
+	{ CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_28},
+
+	/* Additional clock types on Tegra114+ */
+	/* CLOCK_TYPE_PC2CC3M */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3S_T */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(SFROM32KHZ), CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3M_T */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(MEMORY),	CLK(NONE),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_MC2CC3P_A */
+	{ CLK(MEMORY),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(PERIPH),	CLK(NONE),	CLK(AUDIO),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_M */
+	{ CLK(MEMORY),		CLK(NONE),	CLK(NONE),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	/* CLOCK_TYPE_MCPTM2C2C3 */
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(MEMORY2),	CLK(CGENERAL2),	CLK(CGENERAL3),	CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC2CC3T_S */
+	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(OSC),	CLK(NONE),	CLK(SFROM32KHZ), CLK(NONE),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_AC2CC3P_TS2 */
+	{ CLK(AUDIO),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
+		CLK(PERIPH),	CLK(NONE),	CLK(OSC),	CLK(SRC2),
+		MASK_BITS_31_29},
+	/* CLOCK_TYPE_PC01C00_C42C41TC40 */
+	{ CLK(PERIPH),	CLK(CGENERAL_1), CLK(CGENERAL_0), CLK(NONE),
+		CLK(CGENERAL4_2), CLK(CGENERAL4_1), CLK(OSC), CLK(CGENERAL4_0),
+		MASK_BITS_31_29},
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+	/* 0x00 */
+	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S3,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PC2CC3M),
+	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_05h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC2,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SBC3,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x08 */
+	TYPE(PERIPHC_08h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_I2C5,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_0bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_0ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PDD2T),
+	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PDD2T),
+
+	/* 0x10 */
+	TYPE(PERIPHC_10h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_11h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_13h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_16h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_17h,	CLOCK_TYPE_NONE),
+
+	/* 0x18 */
+	TYPE(PERIPHC_18h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_1Bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_1Ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_HSI,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x20 */
+	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_21h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_22h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_23h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_24h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_25h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPTM2C2C3),
+
+	/* 0x28 */
+	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_29h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI_SENSOR,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_2bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_2ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x30 */
+	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_DTV,	CLOCK_TYPE_NONE),
+
+	/* 0x38 */
+	TYPE(PERIPHC_38h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_39h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_3ah,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_3bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_MSENC,	CLOCK_TYPE_MC2CC3P_A),
+	TYPE(PERIPHC_TSEC,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_3eh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_OSC,	CLOCK_TYPE_NONE),
+
+	/* 0x40 */
+	TYPE(PERIPHC_40h,	CLOCK_TYPE_NONE),	/* start with 0x3b0 */
+	TYPE(PERIPHC_MSELECT,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_TSENSOR,	CLOCK_TYPE_PC2CC3T_S),
+	TYPE(PERIPHC_I2S4,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S5,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2C4,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_SBC5,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_SBC6,	CLOCK_TYPE_PC2CC3M_T),
+
+	/* 0x48 */
+	TYPE(PERIPHC_AUDIO,	CLOCK_TYPE_AC2CC3P_TS2),
+	TYPE(PERIPHC_49h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_4ah,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_4bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_4ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_ACTMON,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+	/* 0x50 */
+	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_52h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2CSLOW,	CLOCK_TYPE_PC2CC3S_T),
+	TYPE(PERIPHC_SYS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_55h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_56h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_57h,	CLOCK_TYPE_NONE),
+
+	/* 0x58 */
+	TYPE(PERIPHC_58h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_59h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_5ah,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_5bh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SATAOOB,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SATA,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_HDA,	CLOCK_TYPE_PC2CC3M_T),
+	TYPE(PERIPHC_5fh,	CLOCK_TYPE_NONE),
+
+	/* 0x60 */
+	TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_FS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_XUSB_SS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILAB,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILCD,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CILE,	CLOCK_TYPE_NONE),
+
+	/* 0x68 */
+	TYPE(PERIPHC_DSIA_LP,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DSIB_LP,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_ENTROPY,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DVFS_REF,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DVFS_SOC,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_6eh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_6fh,	CLOCK_TYPE_NONE),
+
+	/* 0x70 */
+	TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SOC_THERM,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_72h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_73h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_74h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_75h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C6,	CLOCK_TYPE_PC2CC3M_T16),
+
+	/* 0x78 */
+	TYPE(PERIPHC_78h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_EMC_DLL,	CLOCK_TYPE_MCPTM2C2C3),
+	TYPE(PERIPHC_7ah,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CLK72MHZ,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_7ch,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_7dh,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VIC,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_7Fh,	CLOCK_TYPE_NONE),
+
+	/* 0x80 */
+	TYPE(PERIPHC_SDMMC_LEGACY_TM,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NVDEC,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NVJPG,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NVENC,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_84h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_85h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_86h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_87h,	CLOCK_TYPE_NONE),
+
+	/* 0x88 */
+	TYPE(PERIPHC_88h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_89h,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DMIC3,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_APE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_QSPI,	CLOCK_TYPE_PC01C00_C42C41TC40),
+	TYPE(PERIPHC_VI_I2C,	CLOCK_TYPE_PC2CC3M_T16),
+	TYPE(PERIPHC_USB2_HSIC_TRK, CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE),
+
+	/* 0x90 */
+	TYPE(PERIPHC_MAUD,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TSECB,	CLOCK_TYPE_NONE),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
+ *	SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+#define INTERNAL_ID(id) (id & 0x000000ff)
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+	/* Low word: 31:0 */
+	NONE(CPU),
+	NONE(COP),
+	NONE(TRIGSYS),
+	NONE(ISPB),
+	NONE(RESERVED4),
+	NONE(TMR),
+	PERIPHC_UART1,
+	PERIPHC_UART2,	/* and vfir 0x68 */
+
+	/* 8 */
+	NONE(GPIO),
+	PERIPHC_SDMMC2,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_I2S2,
+	PERIPHC_I2C1,
+	NONE(RESERVED13),
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC4,
+
+	/* 16 */
+	NONE(TCW),
+	PERIPHC_PWM,
+	PERIPHC_I2S3,
+	NONE(RESERVED19),
+	PERIPHC_VI,
+	NONE(RESERVED21),
+	NONE(USBD),
+	NONE(ISP),
+
+	/* 24 */
+	NONE(RESERVED24),
+	NONE(RESERVED25),
+	PERIPHC_DISP2,
+	PERIPHC_DISP1,
+	PERIPHC_HOST1X,
+	NONE(VCP),
+	PERIPHC_I2S1,
+	NONE(CACHE2),
+
+	/* Middle word: 63:32 */
+	NONE(MEM),
+	NONE(AHBDMA),
+	NONE(APBDMA),
+	NONE(RESERVED35),
+	NONE(RESERVED36),
+	NONE(STAT_MON),
+	NONE(RESERVED38),
+	NONE(FUSE),
+
+	/* 40 */
+	NONE(KFUSE),
+	PERIPHC_SBC1,		/* SBCx = SPIx */
+	PERIPHC_NOR,
+	NONE(RESERVED43),
+	PERIPHC_SBC2,
+	NONE(XIO),
+	PERIPHC_SBC3,
+	PERIPHC_I2C5,
+
+	/* 48 */
+	NONE(DSI),
+	NONE(RESERVED49),
+	PERIPHC_HSI,
+	NONE(RESERVED51),
+	NONE(CSI),
+	NONE(RESERVED53),
+	PERIPHC_I2C2,
+	PERIPHC_UART3,
+
+	/* 56 */
+	NONE(MIPI_CAL),
+	PERIPHC_EMC,
+	NONE(USB2),
+	NONE(USB3),
+	NONE(RESERVED60),
+	PERIPHC_VDE,
+	NONE(BSEA),
+	NONE(BSEV),
+
+	/* Upper word 95:64 */
+	NONE(RESERVED64),
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_I2C3,
+	PERIPHC_SBC4,
+	PERIPHC_SDMMC3,
+	NONE(PCIE),
+	PERIPHC_OWR,
+
+	/* 72 */
+	NONE(AFI),
+	PERIPHC_CSITE,
+	NONE(PCIEXCLK),
+	NONE(AVPUCQ),
+	NONE(LA),
+	NONE(TRACECLKIN),
+	NONE(SOC_THERM),
+	NONE(DTV),
+
+	/* 80 */
+	NONE(RESERVED80),
+	PERIPHC_I2CSLOW,
+	NONE(DSIB),
+	PERIPHC_TSEC,
+	NONE(RESERVED84),
+	NONE(RESERVED85),
+	NONE(RESERVED86),
+	NONE(EMUCIF),
+
+	/* 88 */
+	NONE(RESERVED88),
+	NONE(XUSB_HOST),
+	NONE(RESERVED90),
+	PERIPHC_MSENC,
+	NONE(RESERVED92),
+	NONE(RESERVED93),
+	NONE(RESERVED94),
+	NONE(XUSB_DEV),
+
+	/* V word: 31:0 */
+	NONE(CPUG),
+	NONE(CPULP),
+	NONE(V_RESERVED2),
+	PERIPHC_MSELECT,
+	NONE(V_RESERVED4),
+	PERIPHC_I2S4,
+	PERIPHC_I2S5,
+	PERIPHC_I2C4,
+
+	/* 104 */
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+	PERIPHC_AUDIO,
+	NONE(APBIF),
+	NONE(V_RESERVED12),
+	NONE(V_RESERVED13),
+	NONE(V_RESERVED14),
+	PERIPHC_HDA2CODEC2X,
+
+	/* 112 */
+	NONE(ATOMICS),
+	NONE(V_RESERVED17),
+	NONE(V_RESERVED18),
+	NONE(V_RESERVED19),
+	NONE(V_RESERVED20),
+	NONE(V_RESERVED21),
+	NONE(V_RESERVED22),
+	PERIPHC_ACTMON,
+
+	/* 120 */
+	NONE(EXTPERIPH1),
+	NONE(EXTPERIPH2),
+	NONE(EXTPERIPH3),
+	NONE(OOB),
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+	NONE(TZRAM),
+	NONE(SE),
+
+	/* W word: 31:0 */
+	NONE(HDA2HDMICODEC),
+	NONE(SATACOLD),
+	NONE(W_RESERVED2),
+	NONE(W_RESERVED3),
+	NONE(W_RESERVED4),
+	NONE(W_RESERVED5),
+	NONE(W_RESERVED6),
+	NONE(W_RESERVED7),
+
+	/* 136 */
+	NONE(CEC),
+	NONE(W_RESERVED9),
+	NONE(W_RESERVED10),
+	NONE(W_RESERVED11),
+	NONE(W_RESERVED12),
+	NONE(W_RESERVED13),
+	NONE(XUSB_PADCTL),
+	NONE(W_RESERVED15),
+
+	/* 144 */
+	NONE(W_RESERVED16),
+	NONE(W_RESERVED17),
+	NONE(W_RESERVED18),
+	NONE(W_RESERVED19),
+	NONE(W_RESERVED20),
+	NONE(ENTROPY),
+	NONE(DDS),
+	NONE(W_RESERVED23),
+
+	/* 152 */
+	NONE(W_RESERVED24),
+	NONE(W_RESERVED25),
+	NONE(W_RESERVED26),
+	NONE(DVFS),
+	NONE(XUSB_SS),
+	NONE(W_RESERVED29),
+	NONE(W_RESERVED30),
+	NONE(W_RESERVED31),
+
+	/* X word: 31:0 */
+	NONE(SPARE),
+	NONE(X_RESERVED1),
+	NONE(X_RESERVED2),
+	NONE(X_RESERVED3),
+	NONE(CAM_MCLK),
+	NONE(CAM_MCLK2),
+	PERIPHC_I2C6,
+	NONE(X_RESERVED7),
+
+	/* 168 */
+	NONE(X_RESERVED8),
+	NONE(X_RESERVED9),
+	NONE(X_RESERVED10),
+	NONE(VIM2_CLK),
+	NONE(X_RESERVED12),
+	NONE(X_RESERVED13),
+	NONE(EMC_DLL),
+	NONE(X_RESERVED15),
+
+	/* 176 */
+	NONE(X_RESERVED16),
+	NONE(CLK72MHZ),
+	NONE(VIC),
+	NONE(X_RESERVED19),
+	NONE(X_RESERVED20),
+	NONE(DPAUX),
+	NONE(SOR0),
+	NONE(X_RESERVED23),
+
+	/* 184 */
+	NONE(GPU),
+	NONE(X_RESERVED25),
+	NONE(X_RESERVED26),
+	NONE(X_RESERVED27),
+	NONE(X_RESERVED28),
+	NONE(X_RESERVED29),
+	NONE(X_RESERVED30),
+	NONE(X_RESERVED31),
+
+	/* Y: 192 (192 - 223) */
+	NONE(Y_RESERVED0),
+	PERIPHC_SDMMC_LEGACY_TM,
+	PERIPHC_NVDEC,
+	PERIPHC_NVJPG,
+	NONE(Y_RESERVED4),
+	PERIPHC_DMIC3,		/* 197 */
+	PERIPHC_APE,		/* 198 */
+	NONE(Y_RESERVED7),
+
+	/* 200 */
+	NONE(Y_RESERVED8),
+	NONE(Y_RESERVED9),
+	NONE(Y_RESERVED10),
+	NONE(Y_RESERVED11),
+	NONE(Y_RESERVED12),
+	NONE(Y_RESERVED13),
+	NONE(Y_RESERVED14),
+	NONE(Y_RESERVED15),
+
+	/* 208 */
+	PERIPHC_VI_I2C,		/* 208 */
+	NONE(Y_RESERVED17),
+	NONE(Y_RESERVED18),
+	PERIPHC_QSPI,		/* 211 */
+	NONE(Y_RESERVED20),
+	NONE(Y_RESERVED21),
+	NONE(Y_RESERVED22),
+	NONE(Y_RESERVED23),
+
+	/* 216 */
+	NONE(Y_RESERVED24),
+	NONE(Y_RESERVED25),
+	NONE(Y_RESERVED26),
+	PERIPHC_NVENC,		/* 219 */
+	NONE(Y_RESERVED28),
+	NONE(Y_RESERVED29),
+	NONE(Y_RESERVED30),
+	NONE(Y_RESERVED31),
+};
+
+/*
+ * PLL divider shift/mask tables for all PLL IDs.
+ */
+struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
+	/*
+	 * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLC, etc.)
+	 *       If lock_ena or lock_det are >31, they're not used in that PLL (PLLC, etc.)
+	 */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 10, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
+	  .lock_ena = 32,  .lock_det = 27, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 },	/* PLLC */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8,  .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
+	  .lock_ena = 4,  .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLM */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 10, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 3, .kvco_shift = 2, .kvco_mask = 1 },	/* PLLP */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8,  .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
+	  .lock_ena = 28, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 },	/* PLLA */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8,  .n_mask = 0xFF, .p_shift = 16, .p_mask = 0x1F,
+	  .lock_ena = 29, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 },	/* PLLU */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 11, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 23, .kcp_mask = 3, .kvco_shift = 22, .kvco_mask = 1 },	/* PLLD */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8,  .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLX */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8,  .n_mask = 0xFF, .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 9,  .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLE */
+	{ .m_shift = 0, .m_mask = 0, .n_shift = 0, .n_mask = 0, .p_shift = 0, .p_mask = 0,
+	  .lock_ena = 0, .lock_det = 0, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 },	/* PLLS (gone)*/
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 19,  .p_mask = 0x1F,
+	  .lock_ena = 30, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 },	/* PLLDP */
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that Tegra30+ support 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+	/*
+	 * 0 = 13MHz, 1 = 16.8MHz, 4 = 19.2MHz, 5 = 38.4MHz,
+	 * 8 = 12MHz, 9 = 48MHz,  12 = 26MHz
+	 */
+	if (reg == 5) {
+		debug("OSC_FREQ is 38.4MHz (%d) ...\n", reg);
+		/* Map it to the 5th CLOCK_OSC_ enum, i.e. 4 */
+		return 4;
+	}
+
+	/*
+	 * Map to most common (T20) freqs (except 38.4, handled above):
+	 *  13/16.8 = 0, 19.2 = 1, 12/48 = 2, 26 = 3
+	 */
+	return reg >> 2;
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	enum periphc_internal_id internal_id;
+
+	/* Coresight is a special case */
+	if (periph_id == PERIPH_ID_CSI)
+		return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+	assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+	internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
+	assert(internal_id != -1);
+
+	if (internal_id < PERIPHC_VW_FIRST)
+		/* L, H, U */
+		return &clkrst->crc_clk_src[internal_id];
+
+	if (internal_id < PERIPHC_X_FIRST) {
+		/* VW */
+		internal_id -= PERIPHC_VW_FIRST;
+		return &clkrst->crc_clk_src_vw[internal_id];
+	}
+
+	if (internal_id < PERIPHC_Y_FIRST) {
+		/* X */
+		internal_id -= PERIPHC_X_FIRST;
+		return &clkrst->crc_clk_src_x[internal_id];
+	}
+
+	/* Y */
+	internal_id -= PERIPHC_Y_FIRST;
+	return &clkrst->crc_clk_src_y[internal_id];
+}
+
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+			  int *divider_bits, int *type)
+{
+	enum periphc_internal_id internal_id;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return -1;
+
+	internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
+	if (!periphc_internal_id_isvalid(internal_id))
+		return -1;
+
+	*type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(*type))
+		return -1;
+
+	*mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+	if (*type == CLOCK_TYPE_PC2CC3M_T16)
+		*divider_bits = 16;
+	else
+		*divider_bits = 8;
+
+	return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+	enum periphc_internal_id internal_id;
+	int type;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return CLOCK_ID_NONE;
+
+	internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
+	if (!periphc_internal_id_isvalid(internal_id))
+		return CLOCK_ID_NONE;
+
+	type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(type))
+		return CLOCK_ID_NONE;
+
+	return clock_source[type][source];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id	peripheral to start
+ * @param source	PLL id of required parent clock
+ * @param mux_bits	Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+	enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+	enum clock_type_id type;
+	int mux, err;
+
+	err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+	assert(!err);
+
+	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+		if (clock_source[type][mux] == parent)
+			return mux;
+
+	/* if we get here, either us or the caller has made a mistake */
+	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+	       parent);
+	return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *clk;
+	u32 reg;
+
+	/* Enable/disable the clock to this peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+		clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+	else if ((int)periph_id < (int)PERIPH_ID_X_FIRST)
+		clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+	else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST)
+		clk = &clkrst->crc_clk_out_enb_x;
+	else
+		clk = &clkrst->crc_clk_out_enb_y;
+
+	reg = readl(clk);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *reset;
+	u32 reg;
+
+	/* Enable/disable reset to the peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if (periph_id < PERIPH_ID_VW_FIRST)
+		reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+	else if ((int)periph_id < (int)PERIPH_ID_X_FIRST)
+		reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+	else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST)
+		reset = &clkrst->crc_rst_devices_x;
+	else
+		reset = &clkrst->crc_rst_devices_y;
+
+	reg = readl(reset);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, reset);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id    Clock ID according to tegra210 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+	if (clk_id > PERIPH_ID_COUNT)
+		return PERIPH_ID_NONE;
+
+	switch (clk_id) {
+	case PERIPH_ID_RESERVED4:
+	case PERIPH_ID_RESERVED25:
+	case PERIPH_ID_RESERVED35:
+	case PERIPH_ID_RESERVED36:
+	case PERIPH_ID_RESERVED38:
+	case PERIPH_ID_RESERVED43:
+	case PERIPH_ID_RESERVED49:
+	case PERIPH_ID_RESERVED53:
+	case PERIPH_ID_RESERVED64:
+	case PERIPH_ID_RESERVED84:
+	case PERIPH_ID_RESERVED85:
+	case PERIPH_ID_RESERVED86:
+	case PERIPH_ID_RESERVED88:
+	case PERIPH_ID_RESERVED90:
+	case PERIPH_ID_RESERVED92:
+	case PERIPH_ID_RESERVED93:
+	case PERIPH_ID_RESERVED94:
+	case PERIPH_ID_V_RESERVED2:
+	case PERIPH_ID_V_RESERVED4:
+	case PERIPH_ID_V_RESERVED17:
+	case PERIPH_ID_V_RESERVED18:
+	case PERIPH_ID_V_RESERVED19:
+	case PERIPH_ID_V_RESERVED20:
+	case PERIPH_ID_V_RESERVED21:
+	case PERIPH_ID_V_RESERVED22:
+	case PERIPH_ID_W_RESERVED2:
+	case PERIPH_ID_W_RESERVED3:
+	case PERIPH_ID_W_RESERVED4:
+	case PERIPH_ID_W_RESERVED5:
+	case PERIPH_ID_W_RESERVED6:
+	case PERIPH_ID_W_RESERVED7:
+	case PERIPH_ID_W_RESERVED9:
+	case PERIPH_ID_W_RESERVED10:
+	case PERIPH_ID_W_RESERVED11:
+	case PERIPH_ID_W_RESERVED12:
+	case PERIPH_ID_W_RESERVED13:
+	case PERIPH_ID_W_RESERVED15:
+	case PERIPH_ID_W_RESERVED16:
+	case PERIPH_ID_W_RESERVED17:
+	case PERIPH_ID_W_RESERVED18:
+	case PERIPH_ID_W_RESERVED19:
+	case PERIPH_ID_W_RESERVED20:
+	case PERIPH_ID_W_RESERVED23:
+	case PERIPH_ID_W_RESERVED29:
+	case PERIPH_ID_W_RESERVED30:
+	case PERIPH_ID_W_RESERVED31:
+		return PERIPH_ID_NONE;
+	default:
+		return clk_id;
+	}
+}
+#endif /* CONFIG_OF_CONTROL */
+
+/*
+ * T210 redefines PLLP_OUT2 as PLLP_VCO/DIVP, so do different OUT1-4 setup here.
+ * PLLP_BASE/MISC/etc. is already set up for 408MHz in the BootROM.
+ */
+void tegra210_setup_pllp(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	/* Set PLLP_OUT1, 3 & 4 freqs to 9.6, 102 & 204MHz */
+
+	/* OUT1 */
+	/* Assert RSTN before enable */
+	reg = PLLP_OUT1_RSTN_EN;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
+	/* Set divisor and reenable */
+	reg = (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO)
+		| PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
+
+	/* OUT3, 4 */
+	/* Assert RSTN before enable */
+	reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
+	/* Set divisor and reenable */
+	reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO)
+		| PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS
+		| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO)
+		| PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS;
+	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
+
+	/*
+	 * NOTE: If you want to change PLLP_OUT2 away from 204MHz,
+	 * you can change PLLP_BASE DIVP here. Currently defaults
+	 * to 1, which is 2^1, or 2, so PLLP_OUT2 is 204MHz.
+	 * See Table 13 in section 5.1.4 in T210 TRM for more info.
+	 */
+}
+
+void clock_early_init(void)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_DISPLAY];
+	u32 data;
+
+	tegra210_setup_pllp();
+
+	/*
+	 * PLLC output frequency set to 600Mhz
+	 * PLLD output frequency set to 925Mhz
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+		clock_set_rate(CLOCK_ID_CGENERAL, 125, 4, 0, 0);
+		clock_set_rate(CLOCK_ID_DISPLAY, 96, 2, 0, 12);
+		break;
+	case CLOCK_OSC_FREQ_38_4:
+		clock_set_rate(CLOCK_ID_CGENERAL, 125, 8, 0, 0);
+		clock_set_rate(CLOCK_ID_DISPLAY, 96, 4, 0, 0);
+		break;
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+
+	/* PLLC_MISC1: Turn IDDQ off. NOTE: T210 PLLC_MISC_1 maps to pll_misc */
+	clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc,
+		     (1 << PLLC_IDDQ));
+	udelay(2);
+
+	/*
+	 * PLLC_MISC: Take PLLC out of reset. NOTE: T210 PLLC_MISC maps
+	 * to pll_out[1]
+	 */
+	clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1],
+		     (1 << PLLC_RESET));
+	udelay(2);
+
+	/* PLLD_MISC: Set CLKENABLE and LOCK_DETECT bits */
+	data = (1 << PLLD_ENABLE_CLK) | (1 << pllinfo->lock_ena);
+	writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
+	udelay(2);
+}
+
+unsigned int clk_m_get_rate(unsigned parent_rate)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 value, div;
+
+	value = readl(&clkrst->crc_spare_reg0);
+	div = ((value >> 2) & 0x3) + 1;
+
+	return parent_rate / div;
+}
+
+void arch_timer_init(void)
+{
+	struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
+	u32 freq, val;
+
+	freq = clock_get_rate(CLOCK_ID_CLK_M);
+	debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq);
+
+	if (current_el() == 3)
+		asm("msr cntfrq_el0, %0\n" : : "r" (freq));
+
+	/* Only Tegra114+ has the System Counter regs */
+	debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq);
+	writel(freq, &sysctr->cntfid0);
+
+	val = readl(&sysctr->cntcr);
+	val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG;
+	writel(val, &sysctr->cntcr);
+	debug("%s: TSC CNTCR = 0x%08X\n", __func__, val);
+}
+
+#define PLLREFE_MISC			0x4c8
+#define  PLLREFE_MISC_LOCK		BIT(27)
+#define  PLLREFE_MISC_IDDQ		BIT(24)
+
+#define PLLREFE_BASE			0x4c4
+#define  PLLREFE_BASE_BYPASS		BIT(31)
+#define  PLLREFE_BASE_ENABLE		BIT(30)
+#define  PLLREFE_BASE_REF_DIS		BIT(29)
+#define  PLLREFE_BASE_KCP(kcp)		(((kcp) & 0x3) << 27)
+#define  PLLREFE_BASE_KVCO		BIT(26)
+#define  PLLREFE_BASE_DIVP(p)		(((p) & 0x1f) << 16)
+#define  PLLREFE_BASE_DIVN(n)		(((n) & 0xff) << 8)
+#define  PLLREFE_BASE_DIVM(m)		(((m) & 0xff) << 0)
+
+static int tegra_pllref_enable(void)
+{
+	u32 value;
+	unsigned long start;
+
+	/*
+	 * This sequence comes from Tegra X1 TRM section "Cold Boot, with no
+	 * Recovery Mode or Boot from USB", sub-section "PLLREFE".
+	 */
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLREFE_MISC);
+	value &= ~PLLREFE_MISC_IDDQ;
+	writel(value, NV_PA_CLK_RST_BASE + PLLREFE_MISC);
+
+	udelay(5);
+
+	value = PLLREFE_BASE_ENABLE |
+		PLLREFE_BASE_KCP(0) |
+		PLLREFE_BASE_DIVP(0) |
+		PLLREFE_BASE_DIVN(0x41) |
+		PLLREFE_BASE_DIVM(4);
+	writel(value, NV_PA_CLK_RST_BASE + PLLREFE_BASE);
+
+	debug("waiting for pllrefe lock\n");
+	start = get_timer(0);
+	while (get_timer(start) < 250) {
+		value = readl(NV_PA_CLK_RST_BASE + PLLREFE_MISC);
+		if (value & PLLREFE_MISC_LOCK)
+			break;
+	}
+	if (!(value & PLLREFE_MISC_LOCK)) {
+		debug("  timeout\n");
+		return -ETIMEDOUT;
+	}
+	debug("  done\n");
+
+	return 0;
+}
+
+#define PLLE_SS_CNTL 0x68
+#define  PLLE_SS_CNTL_SSCINCINTR(x) (((x) & 0x3f) << 24)
+#define  PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
+#define  PLLE_SS_CNTL_SSCINVERT (1 << 15)
+#define  PLLE_SS_CNTL_SSCCENTER (1 << 14)
+#define  PLLE_SS_CNTL_SSCBYP (1 << 12)
+#define  PLLE_SS_CNTL_INTERP_RESET (1 << 11)
+#define  PLLE_SS_CNTL_BYPASS_SS (1 << 10)
+#define  PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
+
+#define PLLE_BASE 0x0e8
+#define  PLLE_BASE_ENABLE (1 << 31)
+#define  PLLE_BASE_PLDIV_CML(x) (((x) & 0x1f) << 24)
+#define  PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
+#define  PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
+
+#define PLLE_MISC 0x0ec
+#define  PLLE_MISC_IDDQ_SWCTL (1 << 14)
+#define  PLLE_MISC_IDDQ_OVERRIDE_VALUE (1 << 13)
+#define  PLLE_MISC_LOCK (1 << 11)
+#define  PLLE_PTS (1 << 8)
+#define  PLLE_MISC_KCP(x) (((x) & 0x3) << 6)
+#define  PLLE_MISC_VREG_CTRL(x) (((x) & 0x3) << 2)
+#define  PLLE_MISC_KVCO (1 << 0)
+
+#define PLLE_AUX 0x48c
+#define  PLLE_AUX_SS_SEQ_INCLUDE (1 << 31)
+#define  PLLE_AUX_REF_SEL_PLLREFE (1 << 28)
+#define  PLLE_AUX_SEQ_ENABLE (1 << 24)
+#define  PLLE_AUX_SS_SWCTL (1 << 6)
+#define  PLLE_AUX_ENABLE_SWCTL (1 << 4)
+#define  PLLE_AUX_USE_LOCKDET (1 << 3)
+
+int tegra_plle_enable(void)
+{
+	u32 value;
+	unsigned long start;
+
+	/* PLLREF feeds PLLE */
+	tegra_pllref_enable();
+
+	/*
+	 * This sequence comes from Tegra X1 TRM section "Cold Boot, with no
+	 * Recovery Mode or Boot from USB", sub-section "PLLEs".
+	 */
+
+	/* 1. Select XTAL as the source */
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX);
+	value &= ~PLLE_AUX_REF_SEL_PLLREFE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	value &= ~PLLE_MISC_IDDQ_OVERRIDE_VALUE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+	/* 2. Wait 5 us */
+	udelay(5);
+
+	/*
+	 * 3. Program the following registers to generate a low jitter 100MHz
+	 * clock.
+	 */
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value &= ~PLLE_BASE_PLDIV_CML(0x1f);
+	value &= ~PLLE_BASE_NDIV(0xff);
+	value &= ~PLLE_BASE_MDIV(0xff);
+	value |= PLLE_BASE_PLDIV_CML(0xe);
+	value |= PLLE_BASE_NDIV(0x7d);
+	value |= PLLE_BASE_MDIV(2);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	value |= PLLE_PTS;
+	value &= ~PLLE_MISC_KCP(3);
+	value &= ~PLLE_MISC_VREG_CTRL(3);
+	value &= ~PLLE_MISC_KVCO;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value |= PLLE_BASE_ENABLE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	/* 4. Wait for LOCK */
+
+	debug("waiting for plle lock\n");
+	start = get_timer(0);
+	while (get_timer(start) < 250) {
+		value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+		if (value & PLLE_MISC_LOCK)
+			break;
+	}
+	if (!(value & PLLE_MISC_LOCK)) {
+		debug("  timeout\n");
+		return -ETIMEDOUT;
+	}
+	debug("  done\n");
+
+	/* 5. Enable SSA */
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value &= ~PLLE_SS_CNTL_SSCINC(0xff);
+	value |= PLLE_SS_CNTL_SSCINC(1);
+	value &= ~PLLE_SS_CNTL_SSCINCINTR(0x3f);
+	value |= PLLE_SS_CNTL_SSCINCINTR(0x23);
+	value &= ~PLLE_SS_CNTL_SSCMAX(0x1fff);
+	value |= PLLE_SS_CNTL_SSCMAX(0x21);
+	value &= ~PLLE_SS_CNTL_SSCINVERT;
+	value &= ~PLLE_SS_CNTL_SSCCENTER;
+	value &= ~PLLE_SS_CNTL_BYPASS_SS;
+	value &= ~PLLE_SS_CNTL_SSCBYP;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	/* 6. Wait 300 ns */
+
+	udelay(1);
+	value &= ~PLLE_SS_CNTL_INTERP_RESET;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	return 0;
+}
+
+struct periph_clk_init periph_clk_init_table[] = {
+	{ PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC5, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC6, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
+	{ PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C5, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C6, CLOCK_ID_PERIPH },
+	{ -1, },
+};
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra210/funcmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra210/funcmux.c
new file mode 100644
index 000000000..30d994a17
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra210/funcmux.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra210 high-level function multiplexing */
+
+#include <common.h>
+#include <log.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+	int bad_config = config != FUNCMUX_DEFAULT;
+
+	switch (id) {
+	/*
+	 * Add other periph IDs here as needed.
+	 * Note that all pinmux/pads should have already
+	 * been set up in the board pinmux table in
+	 * pinmux-config-<board>.h for all periphs.
+	 * Leave this in for the odd case where a mux
+	 * needs to be changed on-the-fly.
+	 */
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra210/xusb-padctl.c b/roms/u-boot/arch/arm/mach-tegra/tegra210/xusb-padctl.c
new file mode 100644
index 000000000..c414dfd3b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra210/xusb-padctl.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2015, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#define pr_fmt(fmt) "tegra-xusb-padctl: " fmt
+
+#include <common.h>
+#include <errno.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <dm/of_access.h>
+#include <dm/ofnode.h>
+#include <linux/delay.h>
+
+#include "../xusb-padctl-common.h"
+
+#include <asm/arch/clock.h>
+
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum tegra210_function {
+	TEGRA210_FUNC_SNPS,
+	TEGRA210_FUNC_XUSB,
+	TEGRA210_FUNC_UART,
+	TEGRA210_FUNC_PCIE_X1,
+	TEGRA210_FUNC_PCIE_X4,
+	TEGRA210_FUNC_USB3,
+	TEGRA210_FUNC_SATA,
+	TEGRA210_FUNC_RSVD,
+};
+
+static const char *const tegra210_functions[] = {
+	"snps",
+	"xusb",
+	"uart",
+	"pcie-x1",
+	"pcie-x4",
+	"usb3",
+	"sata",
+	"rsvd",
+};
+
+static const unsigned int tegra210_otg_functions[] = {
+	TEGRA210_FUNC_SNPS,
+	TEGRA210_FUNC_XUSB,
+	TEGRA210_FUNC_UART,
+	TEGRA210_FUNC_RSVD,
+};
+
+static const unsigned int tegra210_usb_functions[] = {
+	TEGRA210_FUNC_SNPS,
+	TEGRA210_FUNC_XUSB,
+};
+
+static const unsigned int tegra210_pci_functions[] = {
+	TEGRA210_FUNC_PCIE_X1,
+	TEGRA210_FUNC_USB3,
+	TEGRA210_FUNC_SATA,
+	TEGRA210_FUNC_PCIE_X4,
+};
+
+#define TEGRA210_LANE(_name, _offset, _shift, _mask, _iddq, _funcs)	\
+	{								\
+		.name = _name,						\
+		.offset = _offset,					\
+		.shift = _shift,					\
+		.mask = _mask,						\
+		.iddq = _iddq,						\
+		.num_funcs = ARRAY_SIZE(tegra210_##_funcs##_functions),	\
+		.funcs = tegra210_##_funcs##_functions,			\
+	}
+
+static const struct tegra_xusb_padctl_lane tegra210_lanes[] = {
+	TEGRA210_LANE("otg-0",     0x004,  0, 0x3, 0, otg),
+	TEGRA210_LANE("otg-1",     0x004,  2, 0x3, 0, otg),
+	TEGRA210_LANE("otg-2",     0x004,  4, 0x3, 0, otg),
+	TEGRA210_LANE("otg-3",     0x004,  6, 0x3, 0, otg),
+	TEGRA210_LANE("usb2-bias", 0x004, 18, 0x3, 0, otg),
+	TEGRA210_LANE("hsic-0",    0x004, 14, 0x1, 0, usb),
+	TEGRA210_LANE("hsic-1",    0x004, 15, 0x1, 0, usb),
+	TEGRA210_LANE("pcie-0",    0x028, 12, 0x3, 1, pci),
+	TEGRA210_LANE("pcie-1",    0x028, 14, 0x3, 2, pci),
+	TEGRA210_LANE("pcie-2",    0x028, 16, 0x3, 3, pci),
+	TEGRA210_LANE("pcie-3",    0x028, 18, 0x3, 4, pci),
+	TEGRA210_LANE("pcie-4",    0x028, 20, 0x3, 5, pci),
+	TEGRA210_LANE("pcie-5",    0x028, 22, 0x3, 6, pci),
+	TEGRA210_LANE("pcie-6",    0x028, 24, 0x3, 7, pci),
+	TEGRA210_LANE("sata-0",    0x028, 30, 0x3, 8, pci),
+};
+
+#define XUSB_PADCTL_ELPG_PROGRAM 0x024
+#define  XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN (1 << 31)
+#define  XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 30)
+#define  XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN (1 << 29)
+
+static int tegra_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
+{
+	u32 value;
+
+	if (padctl->enable++ > 0)
+		return 0;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	udelay(100);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	udelay(100);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	return 0;
+}
+
+static int tegra_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
+{
+	u32 value;
+
+	if (padctl->enable == 0) {
+		pr_err("unbalanced enable/disable");
+		return 0;
+	}
+
+	if (--padctl->enable > 0)
+		return 0;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	udelay(100);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	udelay(100);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+	value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+	return 0;
+}
+
+static int phy_prepare(struct tegra_xusb_phy *phy)
+{
+	int err;
+
+	err = tegra_xusb_padctl_enable(phy->padctl);
+	if (err < 0)
+		return err;
+
+	reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 0);
+
+	return 0;
+}
+
+static int phy_unprepare(struct tegra_xusb_phy *phy)
+{
+	reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 1);
+
+	return tegra_xusb_padctl_disable(phy->padctl);
+}
+
+#define XUSB_PADCTL_USB3_PAD_MUX 0x28
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE (1 << 0)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK0 (1 << 1)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK1 (1 << 2)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK2 (1 << 3)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK3 (1 << 4)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK4 (1 << 5)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK5 (1 << 6)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK6 (1 << 7)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_SATA_PAD_IDDQ_DISABLE_MASK0 (1 << 8)
+
+#define XUSB_PADCTL_UPHY_PLL_P0_CTL1 0x360
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV_MASK (0xff << 20)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV(x) (((x) & 0xff) << 20)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_MDIV_MASK (0x3 << 16)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_LOCKDET_STATUS (1 << 15)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD (1 << 4)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE (1 << 3)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK (0x3 << 1)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP(x) (((x) & 0x3) << 1)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ (1 << 0)
+
+#define XUSB_PADCTL_UPHY_PLL_P0_CTL2 0x364
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL_MASK (0xffffff << 4)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL(x) (((x) & 0xffffff) << 4)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD (1 << 2)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE (1 << 1)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN (1 << 0)
+
+#define XUSB_PADCTL_UPHY_PLL_P0_CTL4 0x36c
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_EN (1 << 15)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL_MASK (0x3 << 12)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL(x) (((x) & 0x3) << 12)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLKBUF_EN (1 << 8)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLK_SEL_MASK (0xf << 4)
+
+#define XUSB_PADCTL_UPHY_PLL_P0_CTL5 0x370
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL_MASK (0xff << 16)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL(x) (((x) & 0xff) << 16)
+
+#define XUSB_PADCTL_UPHY_PLL_P0_CTL8 0x37c
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE (1 << 31)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD (1 << 15)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN (1 << 13)
+#define  XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN (1 << 12)
+
+#define CLK_RST_XUSBIO_PLL_CFG0 0x51c
+#define  CLK_RST_XUSBIO_PLL_CFG0_SEQ_ENABLE (1 << 24)
+#define  CLK_RST_XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ (1 << 13)
+#define  CLK_RST_XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET (1 << 6)
+#define  CLK_RST_XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL (1 << 2)
+#define  CLK_RST_XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL (1 << 0)
+
+static int pcie_phy_enable(struct tegra_xusb_phy *phy)
+{
+	struct tegra_xusb_padctl *padctl = phy->padctl;
+	unsigned long start;
+	u32 value;
+
+	debug("> %s(phy=%p)\n", __func__, phy);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL_MASK;
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL(0x136);
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL5);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL_MASK;
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL(0x2a);
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL5);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL_MASK;
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLK_SEL_MASK;
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL(2);
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_MDIV_MASK;
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV_MASK;
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV(25);
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+
+	udelay(1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLKBUF_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+
+	debug("  waiting for calibration\n");
+
+	start = get_timer(0);
+
+	while (get_timer(start) < 250) {
+		value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+		if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE)
+			break;
+	}
+	if (!(value & XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE)) {
+		debug("  timeout\n");
+		return -ETIMEDOUT;
+	}
+	debug("  done\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+
+	debug("  waiting for calibration to stop\n");
+
+	start = get_timer(0);
+
+	while (get_timer(start) < 250) {
+		value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
+		if ((value & XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE) == 0)
+			break;
+	}
+	if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE) {
+		debug("  timeout\n");
+		return -ETIMEDOUT;
+	}
+	debug("  done\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+
+	debug("  waiting for PLL to lock...\n");
+	start = get_timer(0);
+
+	while (get_timer(start) < 250) {
+		value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+		if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL1_LOCKDET_STATUS)
+			break;
+	}
+	if (!(value & XUSB_PADCTL_UPHY_PLL_P0_CTL1_LOCKDET_STATUS)) {
+		debug("  timeout\n");
+		return -ETIMEDOUT;
+	}
+	debug("  done\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN;
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+
+	debug("  waiting for register calibration...\n");
+	start = get_timer(0);
+
+	while (get_timer(start) < 250) {
+		value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+		if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE)
+			break;
+	}
+	if (!(value & XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE)) {
+		debug("  timeout\n");
+		return -ETIMEDOUT;
+	}
+	debug("  done\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+
+	debug("  waiting for register calibration to stop...\n");
+	start = get_timer(0);
+
+	while (get_timer(start) < 250) {
+		value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+		if ((value & XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE) == 0)
+			break;
+	}
+	if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE) {
+		debug("  timeout\n");
+		return -ETIMEDOUT;
+	}
+	debug("  done\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
+
+	debug("< %s()\n", __func__);
+	return 0;
+}
+
+static int pcie_phy_disable(struct tegra_xusb_phy *phy)
+{
+	return 0;
+}
+
+static const struct tegra_xusb_phy_ops pcie_phy_ops = {
+	.prepare = phy_prepare,
+	.enable = pcie_phy_enable,
+	.disable = pcie_phy_disable,
+	.unprepare = phy_unprepare,
+};
+
+static struct tegra_xusb_phy tegra210_phys[] = {
+	{
+		.type = TEGRA_XUSB_PADCTL_PCIE,
+		.ops = &pcie_phy_ops,
+		.padctl = &padctl,
+	},
+};
+
+static const struct tegra_xusb_padctl_soc tegra210_socdata = {
+	.lanes = tegra210_lanes,
+	.num_lanes = ARRAY_SIZE(tegra210_lanes),
+	.functions = tegra210_functions,
+	.num_functions = ARRAY_SIZE(tegra210_functions),
+	.phys = tegra210_phys,
+	.num_phys = ARRAY_SIZE(tegra210_phys),
+};
+
+void tegra_xusb_padctl_init(void)
+{
+	ofnode nodes[1];
+	int count = 0;
+	int ret;
+
+	debug("%s: start\n", __func__);
+	if (of_live_active()) {
+		struct device_node *np = of_find_compatible_node(NULL, NULL,
+						"nvidia,tegra210-xusb-padctl");
+
+		debug("np=%p\n", np);
+		if (np) {
+			nodes[0] = np_to_ofnode(np);
+			count = 1;
+		}
+	} else {
+		int node_offsets[1];
+		int i;
+
+		count = fdtdec_find_aliases_for_id(gd->fdt_blob, "padctl",
+				COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL,
+				node_offsets, ARRAY_SIZE(node_offsets));
+		for (i = 0; i < count; i++)
+			nodes[i] = offset_to_ofnode(node_offsets[i]);
+	}
+
+	ret = tegra_xusb_process_nodes(nodes, count, &tegra210_socdata);
+	debug("%s: done, ret=%d\n", __func__, ret);
+}
+
+void tegra_xusb_padctl_exit(void)
+{
+	u32 value;
+
+	debug("> %s\n", __func__);
+
+	value = padctl_readl(&padctl, XUSB_PADCTL_USB3_PAD_MUX);
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK0;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK1;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK2;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK3;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK4;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK5;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK6;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_SATA_PAD_IDDQ_DISABLE_MASK0;
+	padctl_writel(&padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+
+	value = padctl_readl(&padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ;
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK;
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP(3);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE;
+	padctl_writel(&padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+
+	reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 1);
+	while (padctl.enable)
+		tegra_xusb_padctl_disable(&padctl);
+
+	debug("< %s()\n", __func__);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra30/Kconfig b/roms/u-boot/arch/arm/mach-tegra/tegra30/Kconfig
new file mode 100644
index 000000000..85b8ce294
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra30/Kconfig
@@ -0,0 +1,38 @@
+if TEGRA30
+
+choice
+	prompt "Tegra30 board select"
+	optional
+
+config TARGET_APALIS_T30
+	bool "Toradex Apalis T30 board"
+	select BOARD_LATE_INIT
+
+config TARGET_BEAVER
+	bool "NVIDIA Tegra30 Beaver evaluation board"
+	select BOARD_LATE_INIT
+
+config TARGET_CARDHU
+	bool "NVIDIA Tegra30 Cardhu evaluation board"
+	select BOARD_LATE_INIT
+
+config TARGET_COLIBRI_T30
+	bool "Toradex Colibri T30 board"
+	select BOARD_LATE_INIT
+
+config TARGET_TEC_NG
+	bool "Avionic Design TEC-NG board"
+	select BOARD_LATE_INIT
+
+endchoice
+
+config SYS_SOC
+	default "tegra30"
+
+source "board/toradex/apalis_t30/Kconfig"
+source "board/nvidia/beaver/Kconfig"
+source "board/nvidia/cardhu/Kconfig"
+source "board/toradex/colibri_t30/Kconfig"
+source "board/avionic-design/tec-ng/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra30/Makefile b/roms/u-boot/arch/arm/mach-tegra/tegra30/Makefile
new file mode 100644
index 000000000..9f170576e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra30/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+
+obj-$(CONFIG_SPL_BUILD) += cpu.o
+
+obj-y	+= clock.o funcmux.o pinmux.o
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra30/clock.c b/roms/u-boot/arch/arm/mach-tegra/tegra30/clock.c
new file mode 100644
index 000000000..b0641c6a4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra30/clock.c
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ */
+
+/* Tegra30 Clock control functions */
+
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <linux/delay.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra30 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
+	CLOCK_TYPE_MCPA,	/* and so on */
+	CLOCK_TYPE_MCPT,
+	CLOCK_TYPE_PCM,
+	CLOCK_TYPE_PCMT,
+	CLOCK_TYPE_PCMT16,
+	CLOCK_TYPE_PDCT,
+	CLOCK_TYPE_ACPT,
+	CLOCK_TYPE_ASPTE,
+	CLOCK_TYPE_PMDACD2T,
+	CLOCK_TYPE_PCST,
+
+	CLOCK_TYPE_COUNT,
+	CLOCK_TYPE_NONE = -1,   /* invalid clock type */
+};
+
+enum {
+	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ *  The extra column in each clock source array is used to store the mask
+ *  bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+	{ CLK(AUDIO),   CLK(XCPU),      CLK(PERIPH),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),  CLK(CGENERAL),  CLK(PERIPH),    CLK(AUDIO),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),  CLK(CGENERAL),  CLK(PERIPH),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(NONE),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),  CLK(DISPLAY),   CLK(CGENERAL),  CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),   CLK(CGENERAL),  CLK(PERIPH),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),   CLK(SFROM32KHZ),	CLK(PERIPH),   CLK(OSC),
+		CLK(EPCI),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),  CLK(MEMORY),    CLK(DISPLAY),   CLK(AUDIO),
+		CLK(CGENERAL),  CLK(DISPLAY2),  CLK(OSC),       CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(SFROM32KHZ), CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
+		MASK_BITS_31_28}
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+	/* 0x00 */
+	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S2,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,  CLOCK_TYPE_PCM),
+	TYPE(PERIPHC_PWM,       CLOCK_TYPE_PCST),  /* only PWM uses b29:28 */
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC2,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC3,      CLOCK_TYPE_PCMT),
+
+	/* 0x08 */
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C1,      CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_DVC_I2C,   CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC1,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_DISP1,     CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_DISP2,     CLOCK_TYPE_PMDACD2T),
+
+	/* 0x10 */
+	TYPE(PERIPHC_CVE,       CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,    CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_G3D,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_G2D,	CLOCK_TYPE_MCPA),
+
+	/* 0x18 */
+	TYPE(PERIPHC_NDFLASH,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VFIR,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_EPP,       CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MPE,       CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MIPI,      CLOCK_TYPE_PCMT),       /* MIPI base-band HSI */
+	TYPE(PERIPHC_UART1,     CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART2,     CLOCK_TYPE_PCMT),
+
+	/* 0x20 */
+	TYPE(PERIPHC_HOST1X,    CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVO,       CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_HDMI,      CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVDAC,     CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_I2C2,      CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPT),
+
+	/* 0x28 */
+	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC4,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2C3,      CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SDMMC3,    CLOCK_TYPE_PCMT),
+
+	/* 0x30 */
+	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_OWR,       CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NOR,       CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_CSITE,     CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2S0,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+
+	/* 0x38h */	     /* Jumps to reg offset 0x3B0h - new for T30 */
+	TYPE(PERIPHC_G3D2,      CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MSELECT,   CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_TSENSOR,   CLOCK_TYPE_PCST),       /* s/b PCTS */
+	TYPE(PERIPHC_I2S3,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S4,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2C4,      CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SBC5,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC6,      CLOCK_TYPE_PCMT),
+
+	/* 0x40 */
+	TYPE(PERIPHC_AUDIO,     CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DAM0,      CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM1,      CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM2,      CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_ACTMON,    CLOCK_TYPE_PCST),       /* MASK 31:30 */
+	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+	/* 0x48 */
+	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2CSLOW,   CLOCK_TYPE_PCST),       /* MASK 31:30 */
+	TYPE(PERIPHC_SYS,       CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SPEEDO,    CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+
+	/* 0x50 */
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SATAOOB,   CLOCK_TYPE_PCMT),       /* offset 0x420h */
+	TYPE(PERIPHC_SATA,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_HDA,       CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
+ *	SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+	/* Low word: 31:0 */
+	NONE(CPU),
+	NONE(COP),
+	NONE(TRIGSYS),
+	NONE(RESERVED3),
+	NONE(RESERVED4),
+	NONE(TMR),
+	PERIPHC_UART1,
+	PERIPHC_UART2,  /* and vfir 0x68 */
+
+	/* 8 */
+	NONE(GPIO),
+	PERIPHC_SDMMC2,
+	NONE(SPDIF),	    /* 0x08 and 0x0c, unclear which to use */
+	PERIPHC_I2S1,
+	PERIPHC_I2C1,
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC4,
+
+	/* 16 */
+	NONE(RESERVED16),
+	PERIPHC_PWM,
+	PERIPHC_I2S2,
+	PERIPHC_EPP,
+	PERIPHC_VI,
+	PERIPHC_G2D,
+	NONE(USBD),
+	NONE(ISP),
+
+	/* 24 */
+	PERIPHC_G3D,
+	NONE(RESERVED25),
+	PERIPHC_DISP2,
+	PERIPHC_DISP1,
+	PERIPHC_HOST1X,
+	NONE(VCP),
+	PERIPHC_I2S0,
+	NONE(CACHE2),
+
+	/* Middle word: 63:32 */
+	NONE(MEM),
+	NONE(AHBDMA),
+	NONE(APBDMA),
+	NONE(RESERVED35),
+	NONE(RESERVED36),
+	NONE(STAT_MON),
+	NONE(RESERVED38),
+	NONE(RESERVED39),
+
+	/* 40 */
+	NONE(KFUSE),
+	PERIPHC_SBC1,
+	PERIPHC_NOR,
+	NONE(RESERVED43),
+	PERIPHC_SBC2,
+	NONE(RESERVED45),
+	PERIPHC_SBC3,
+	PERIPHC_DVC_I2C,
+
+	/* 48 */
+	NONE(DSI),
+	PERIPHC_TVO,    /* also CVE 0x40 */
+	PERIPHC_MIPI,
+	PERIPHC_HDMI,
+	NONE(CSI),
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_UART3,
+
+	/* 56 */
+	NONE(RESERVED56),
+	PERIPHC_EMC,
+	NONE(USB2),
+	NONE(USB3),
+	PERIPHC_MPE,
+	PERIPHC_VDE,
+	NONE(BSEA),
+	NONE(BSEV),
+
+	/* Upper word 95:64 */
+	PERIPHC_SPEEDO,
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_I2C3,
+	PERIPHC_SBC4,
+	PERIPHC_SDMMC3,
+	NONE(PCIE),
+	PERIPHC_OWR,
+
+	/* 72 */
+	NONE(AFI),
+	PERIPHC_CSITE,
+	NONE(PCIEXCLK),
+	NONE(AVPUCQ),
+	NONE(RESERVED76),
+	NONE(RESERVED77),
+	NONE(RESERVED78),
+	NONE(DTV),
+
+	/* 80 */
+	PERIPHC_NANDSPEED,
+	PERIPHC_I2CSLOW,
+	NONE(DSIB),
+	NONE(RESERVED83),
+	NONE(IRAMA),
+	NONE(IRAMB),
+	NONE(IRAMC),
+	NONE(IRAMD),
+
+	/* 88 */
+	NONE(CRAM2),
+	NONE(RESERVED89),
+	NONE(MDOUBLER),
+	NONE(RESERVED91),
+	NONE(SUSOUT),
+	NONE(RESERVED93),
+	NONE(RESERVED94),
+	NONE(RESERVED95),
+
+	/* V word: 31:0 */
+	NONE(CPUG),
+	NONE(CPULP),
+	PERIPHC_G3D2,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+
+	/* 08 */
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+	PERIPHC_AUDIO,
+	NONE(APBIF),
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+
+	/* 16 */
+	NONE(ATOMICS),
+	NONE(RESERVED17),
+	NONE(RESERVED18),
+	NONE(RESERVED19),
+	NONE(RESERVED20),
+	NONE(RESERVED21),
+	NONE(RESERVED22),
+	PERIPHC_ACTMON,
+
+	/* 24 */
+	NONE(RESERVED24),
+	NONE(RESERVED25),
+	NONE(RESERVED26),
+	NONE(RESERVED27),
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+	NONE(RESERVED30),
+	NONE(RESERVED31),
+
+	/* W word: 31:0 */
+	NONE(HDA2HDMICODEC),
+	NONE(SATACOLD),
+	NONE(RESERVED0_PCIERX0),
+	NONE(RESERVED1_PCIERX1),
+	NONE(RESERVED2_PCIERX2),
+	NONE(RESERVED3_PCIERX3),
+	NONE(RESERVED4_PCIERX4),
+	NONE(RESERVED5_PCIERX5),
+
+	/* 40 */
+	NONE(CEC),
+	NONE(RESERVED6_PCIE2),
+	NONE(RESERVED7_EMC),
+	NONE(RESERVED8_HDMI),
+	NONE(RESERVED9_SATA),
+	NONE(RESERVED10_MIPI),
+	NONE(EX_RESERVED46),
+	NONE(EX_RESERVED47),
+};
+
+/*
+ * PLL divider shift/mask tables for all PLL IDs.
+ */
+struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
+	/*
+	 * T30: some deviations from T2x.
+	 * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.)
+	 *       If lock_ena or lock_det are >31, they're not used in that PLL.
+	 */
+
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF,  .p_shift = 20, .p_mask = 0x0F,
+	  .lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 },	/* PLLC */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF,  .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 0,  .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLM */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLP */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLA */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x01,
+	  .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLU */
+	{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLD */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 20, .p_mask = 0x0F,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 0, .kvco_mask = 0 },	/* PLLX */
+	{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 0,  .p_mask = 0,
+	  .lock_ena = 9,  .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },	/* PLLE */
+	{ .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
+	  .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF },	/* PLLS (RESERVED) */
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that T30 supports 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+	if (reg & 1)			/* one of the newer freqs */
+		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
+
+	return reg >> 2;	/* Map to most common (T20) freqs */
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	enum periphc_internal_id internal_id;
+
+	/* Coresight is a special case */
+	if (periph_id == PERIPH_ID_CSI)
+		return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+	assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(internal_id != -1);
+	if (internal_id >= PERIPHC_VW_FIRST) {
+		internal_id -= PERIPHC_VW_FIRST;
+		return &clkrst->crc_clk_src_vw[internal_id];
+	} else
+		return &clkrst->crc_clk_src[internal_id];
+}
+
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+			  int *divider_bits, int *type)
+{
+	enum periphc_internal_id internal_id;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return -1;
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	if (!periphc_internal_id_isvalid(internal_id))
+		return -1;
+
+	*type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(*type))
+		return -1;
+
+	*mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+	if (*type == CLOCK_TYPE_PCMT16)
+		*divider_bits = 16;
+	else
+		*divider_bits = 8;
+
+	return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+	enum periphc_internal_id internal_id;
+	int type;
+
+	if (!clock_periph_id_isvalid(periph_id))
+		return CLOCK_ID_NONE;
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	if (!periphc_internal_id_isvalid(internal_id))
+		return CLOCK_ID_NONE;
+
+	type = clock_periph_type[internal_id];
+	if (!clock_type_id_isvalid(type))
+		return CLOCK_ID_NONE;
+
+	return clock_source[type][source];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id	peripheral to start
+ * @param source	PLL id of required parent clock
+ * @param mux_bits	Set to number of bits in mux register: 2 or 4
+ * @param divider_bits  Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+	enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+	enum clock_type_id type;
+	int mux, err;
+
+	err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+	assert(!err);
+
+	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+		if (clock_source[type][mux] == parent)
+			return mux;
+
+	/* if we get here, either us or the caller has made a mistake */
+	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+		parent);
+	return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *clk;
+	u32 reg;
+
+	/* Enable/disable the clock to this peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+		clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+	else
+		clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+	reg = readl(clk);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *reset;
+	u32 reg;
+
+	/* Enable/disable reset to the peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if (periph_id < PERIPH_ID_VW_FIRST)
+		reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+	else
+		reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+	reg = readl(reset);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, reset);
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id	Clock ID according to tegra30 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+	if (clk_id > PERIPH_ID_COUNT)
+		return PERIPH_ID_NONE;
+
+	switch (clk_id) {
+	case PERIPH_ID_RESERVED3:
+	case PERIPH_ID_RESERVED4:
+	case PERIPH_ID_RESERVED16:
+	case PERIPH_ID_RESERVED24:
+	case PERIPH_ID_RESERVED35:
+	case PERIPH_ID_RESERVED43:
+	case PERIPH_ID_RESERVED45:
+	case PERIPH_ID_RESERVED56:
+	case PERIPH_ID_PCIEXCLK:
+	case PERIPH_ID_RESERVED76:
+	case PERIPH_ID_RESERVED77:
+	case PERIPH_ID_RESERVED78:
+	case PERIPH_ID_RESERVED83:
+	case PERIPH_ID_RESERVED89:
+	case PERIPH_ID_RESERVED91:
+	case PERIPH_ID_RESERVED93:
+	case PERIPH_ID_RESERVED94:
+	case PERIPH_ID_RESERVED95:
+		return PERIPH_ID_NONE;
+	default:
+		return clk_id;
+	}
+}
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
+
+void clock_early_init(void)
+{
+	tegra30_set_up_pllp();
+}
+
+void arch_timer_init(void)
+{
+}
+
+#define PMC_SATA_PWRGT 0x1ac
+#define  PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE (1 << 5)
+#define  PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1 << 4)
+
+#define PLLE_SS_CNTL 0x68
+#define  PLLE_SS_CNTL_SSCINCINTRV(x) (((x) & 0x3f) << 24)
+#define  PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
+#define  PLLE_SS_CNTL_SSCBYP (1 << 12)
+#define  PLLE_SS_CNTL_INTERP_RESET (1 << 11)
+#define  PLLE_SS_CNTL_BYPASS_SS (1 << 10)
+#define  PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
+
+#define PLLE_BASE 0x0e8
+#define  PLLE_BASE_ENABLE_CML (1 << 31)
+#define  PLLE_BASE_ENABLE (1 << 30)
+#define  PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24)
+#define  PLLE_BASE_PLDIV(x) (((x) & 0x3f) << 16)
+#define  PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
+#define  PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
+
+#define PLLE_MISC 0x0ec
+#define  PLLE_MISC_SETUP_BASE(x) (((x) & 0xffff) << 16)
+#define  PLLE_MISC_PLL_READY (1 << 15)
+#define  PLLE_MISC_LOCK (1 << 11)
+#define  PLLE_MISC_LOCK_ENABLE (1 << 9)
+#define  PLLE_MISC_SETUP_EXT(x) (((x) & 0x3) << 2)
+
+static int tegra_plle_train(void)
+{
+	unsigned int timeout = 2000;
+	unsigned long value;
+
+	value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+	value |= PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
+	writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+	value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+	value |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
+	writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+	value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+	value &= ~PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
+	writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+	do {
+		value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+		if (value & PLLE_MISC_PLL_READY)
+			break;
+
+		udelay(100);
+	} while (--timeout);
+
+	if (timeout == 0) {
+		pr_err("timeout waiting for PLLE to become ready");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+int tegra_plle_enable(void)
+{
+	unsigned int cpcon = 11, p = 18, n = 150, m = 1, timeout = 1000;
+	u32 value;
+	int err;
+
+	/* disable PLLE clock */
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value &= ~PLLE_BASE_ENABLE_CML;
+	value &= ~PLLE_BASE_ENABLE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	/* clear lock enable and setup field */
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	value &= ~PLLE_MISC_LOCK_ENABLE;
+	value &= ~PLLE_MISC_SETUP_BASE(0xffff);
+	value &= ~PLLE_MISC_SETUP_EXT(0x3);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	if ((value & PLLE_MISC_PLL_READY) == 0) {
+		err = tegra_plle_train();
+		if (err < 0) {
+			pr_err("failed to train PLLE: %d", err);
+			return err;
+		}
+	}
+
+	/* configure PLLE */
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	value &= ~PLLE_BASE_PLDIV_CML(0x0f);
+	value |= PLLE_BASE_PLDIV_CML(cpcon);
+
+	value &= ~PLLE_BASE_PLDIV(0x3f);
+	value |= PLLE_BASE_PLDIV(p);
+
+	value &= ~PLLE_BASE_NDIV(0xff);
+	value |= PLLE_BASE_NDIV(n);
+
+	value &= ~PLLE_BASE_MDIV(0xff);
+	value |= PLLE_BASE_MDIV(m);
+
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+	value |= PLLE_MISC_SETUP_BASE(0x7);
+	value |= PLLE_MISC_LOCK_ENABLE;
+	value |= PLLE_MISC_SETUP_EXT(0);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET |
+		 PLLE_SS_CNTL_BYPASS_SS;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+	value |= PLLE_BASE_ENABLE_CML | PLLE_BASE_ENABLE;
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+	do {
+		value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+		if (value & PLLE_MISC_LOCK)
+			break;
+
+		udelay(2);
+	} while (--timeout);
+
+	if (timeout == 0) {
+		pr_err("timeout waiting for PLLE to lock");
+		return -ETIMEDOUT;
+	}
+
+	udelay(50);
+
+	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+	value &= ~PLLE_SS_CNTL_SSCINCINTRV(0x3f);
+	value |= PLLE_SS_CNTL_SSCINCINTRV(0x18);
+
+	value &= ~PLLE_SS_CNTL_SSCINC(0xff);
+	value |= PLLE_SS_CNTL_SSCINC(0x01);
+
+	value &= ~PLLE_SS_CNTL_SSCBYP;
+	value &= ~PLLE_SS_CNTL_INTERP_RESET;
+	value &= ~PLLE_SS_CNTL_BYPASS_SS;
+
+	value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff);
+	value |= PLLE_SS_CNTL_SSCMAX(0x24);
+	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+	return 0;
+}
+
+struct periph_clk_init periph_clk_init_table[] = {
+	{ PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC5, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SBC6, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_DISP1, CLOCK_ID_CGENERAL },
+	{ PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
+	{ PERIPH_ID_DVC_I2C, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
+	{ PERIPH_ID_I2C4, CLOCK_ID_PERIPH },
+	{ -1, },
+};
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra30/cpu.c b/roms/u-boot/arch/arm/mach-tegra/tegra30/cpu.c
new file mode 100644
index 000000000..651edd27e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra30/cpu.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include <linux/delay.h>
+#include "../cpu.h"
+
+/* Tegra30-specific CPU init code */
+void tegra_i2c_ll_write_addr(uint addr, uint config)
+{
+	struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
+
+	writel(addr, &reg->cmd_addr0);
+	writel(config, &reg->cnfg);
+}
+
+void tegra_i2c_ll_write_data(uint data, uint config)
+{
+	struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
+
+	writel(data, &reg->cmd_data1);
+	writel(config, &reg->cnfg);
+}
+
+#define TPS62366A_I2C_ADDR		0xC0
+#define TPS62366A_SET1_REG		0x01
+#define TPS62366A_SET1_DATA		(0x4600 | TPS62366A_SET1_REG)
+
+#define TPS62361B_I2C_ADDR		0xC0
+#define TPS62361B_SET3_REG		0x03
+#define TPS62361B_SET3_DATA		(0x4600 | TPS62361B_SET3_REG)
+
+#define TPS65911_I2C_ADDR		0x5A
+#define TPS65911_VDDCTRL_OP_REG		0x28
+#define TPS65911_VDDCTRL_SR_REG		0x27
+#define TPS65911_VDDCTRL_OP_DATA	(0x2400 | TPS65911_VDDCTRL_OP_REG)
+#define TPS65911_VDDCTRL_SR_DATA	(0x0100 | TPS65911_VDDCTRL_SR_REG)
+#define I2C_SEND_2_BYTES		0x0A02
+
+static void enable_cpu_power_rail(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	u32 reg;
+
+	debug("enable_cpu_power_rail entry\n");
+	reg = readl(&pmc->pmc_cntrl);
+	reg |= CPUPWRREQ_OE;
+	writel(reg, &pmc->pmc_cntrl);
+
+	/* Set VDD_CORE to 1.200V. */
+#ifdef CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1
+	tegra_i2c_ll_write_addr(TPS62366A_I2C_ADDR, 2);
+	tegra_i2c_ll_write_data(TPS62366A_SET1_DATA, I2C_SEND_2_BYTES);
+#endif
+#ifdef CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
+	tegra_i2c_ll_write_addr(TPS62361B_I2C_ADDR, 2);
+	tegra_i2c_ll_write_data(TPS62361B_SET3_DATA, I2C_SEND_2_BYTES);
+#endif
+	udelay(1000);
+
+	/*
+	 * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus.
+	 * First set VDD to 1.0125V, then enable the VDD regulator.
+	 */
+	tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2);
+	tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES);
+	udelay(1000);
+	tegra_i2c_ll_write_data(TPS65911_VDDCTRL_SR_DATA, I2C_SEND_2_BYTES);
+	udelay(10 * 1000);
+}
+
+/**
+ * The T30 requires some special clock initialization, including setting up
+ * the dvc i2c, turning on mselect and selecting the G CPU cluster
+ */
+void t30_init_clocks(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+	u32 val;
+
+	debug("t30_init_clocks entry\n");
+	/* Set active CPU cluster to G */
+	clrbits_le32(flow->cluster_control, 1 << 0);
+
+	writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
+
+	val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) |
+		(1 << CLK_SYS_RATE_AHB_RATE_SHIFT) |
+		(0 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT) |
+		(0 << CLK_SYS_RATE_APB_RATE_SHIFT);
+	writel(val, &clkrst->crc_clk_sys_rate);
+
+	/* Put i2c, mselect in reset and enable clocks */
+	reset_set_enable(PERIPH_ID_DVC_I2C, 1);
+	clock_set_enable(PERIPH_ID_DVC_I2C, 1);
+	reset_set_enable(PERIPH_ID_MSELECT, 1);
+	clock_set_enable(PERIPH_ID_MSELECT, 1);
+
+	/* Switch MSELECT clock to PLLP (00) and use a divisor of 2 */
+	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, 2);
+
+	/*
+	 * Our high-level clock routines are not available prior to
+	 * relocation. We use the low-level functions which require a
+	 * hard-coded divisor. Use CLK_M with divide by (n + 1 = 17)
+	 */
+	clock_ll_set_source_divisor(PERIPH_ID_DVC_I2C, 3, 16);
+
+	/*
+	 * Give clocks time to stabilize, then take i2c and mselect out of
+	 * reset
+	 */
+	udelay(1000);
+	reset_set_enable(PERIPH_ID_DVC_I2C, 0);
+	reset_set_enable(PERIPH_ID_MSELECT, 0);
+}
+
+static void set_cpu_running(int run)
+{
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+
+	debug("set_cpu_running entry, run = %d\n", run);
+	writel(run ? FLOW_MODE_NONE : FLOW_MODE_STOP, &flow->halt_cpu_events);
+}
+
+void start_cpu(u32 reset_vector)
+{
+	debug("start_cpu entry, reset_vector = %x\n", reset_vector);
+	t30_init_clocks();
+
+	/* Enable VDD_CPU */
+	enable_cpu_power_rail();
+
+	set_cpu_running(0);
+
+	/* Hold the CPUs in reset */
+	reset_A9_cpu(1);
+
+	/* Disable the CPU clock */
+	enable_cpu_clock(0);
+
+	/* Enable CoreSight */
+	clock_enable_coresight(1);
+
+	/*
+	 * Set the entry point for CPU execution from reset,
+	 *  if it's a non-zero value.
+	 */
+	if (reset_vector)
+		writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+	/* Enable the CPU clock */
+	enable_cpu_clock(1);
+
+	/* If the CPU doesn't already have power, power it up */
+	powerup_cpu();
+
+	/* Take the CPU out of reset */
+	reset_A9_cpu(0);
+
+	set_cpu_running(1);
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra30/funcmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra30/funcmux.c
new file mode 100644
index 000000000..c3ee787f3
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra30/funcmux.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+/* Tegra30 high-level function multiplexing */
+
+#include <common.h>
+#include <log.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+	int bad_config = config != FUNCMUX_DEFAULT;
+
+	switch (id) {
+	case PERIPH_ID_UART1:
+		switch (config) {
+		case FUNCMUX_UART1_ULPI:
+			pinmux_set_func(PMUX_PINGRP_ULPI_DATA0_PO1,
+					PMUX_FUNC_UARTA);
+			pinmux_set_func(PMUX_PINGRP_ULPI_DATA1_PO2,
+					PMUX_FUNC_UARTA);
+			pinmux_set_func(PMUX_PINGRP_ULPI_DATA2_PO3,
+					PMUX_FUNC_UARTA);
+			pinmux_set_func(PMUX_PINGRP_ULPI_DATA3_PO4,
+					PMUX_FUNC_UARTA);
+			pinmux_tristate_disable(PMUX_PINGRP_ULPI_DATA0_PO1);
+			pinmux_tristate_disable(PMUX_PINGRP_ULPI_DATA1_PO2);
+			pinmux_tristate_disable(PMUX_PINGRP_ULPI_DATA2_PO3);
+			pinmux_tristate_disable(PMUX_PINGRP_ULPI_DATA3_PO4);
+			break;
+		}
+		break;
+
+	/* Add other periph IDs here as needed */
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/tegra30/pinmux.c b/roms/u-boot/arch/arm/mach-tegra/tegra30/pinmux.c
new file mode 100644
index 000000000..d11b2aa57
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/tegra30/pinmux.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+
+#define PIN(pin, f0, f1, f2, f3)	\
+	{				\
+		.funcs = {		\
+			PMUX_FUNC_##f0,	\
+			PMUX_FUNC_##f1,	\
+			PMUX_FUNC_##f2,	\
+			PMUX_FUNC_##f3,	\
+		},			\
+	}
+
+#define PIN_RESERVED {}
+
+static const struct pmux_pingrp_desc tegra30_pingroups[] = {
+	/*  pin,                  f0,           f1,       f2,       f3 */
+	/* Offset 0x3000 */
+	PIN(ULPI_DATA0_PO1,       SPI3,         HSI,      UARTA,    ULPI),
+	PIN(ULPI_DATA1_PO2,       SPI3,         HSI,      UARTA,    ULPI),
+	PIN(ULPI_DATA2_PO3,       SPI3,         HSI,      UARTA,    ULPI),
+	PIN(ULPI_DATA3_PO4,       SPI3,         HSI,      UARTA,    ULPI),
+	PIN(ULPI_DATA4_PO5,       SPI2,         HSI,      UARTA,    ULPI),
+	PIN(ULPI_DATA5_PO6,       SPI2,         HSI,      UARTA,    ULPI),
+	PIN(ULPI_DATA6_PO7,       SPI2,         HSI,      UARTA,    ULPI),
+	PIN(ULPI_DATA7_PO0,       SPI2,         HSI,      UARTA,    ULPI),
+	PIN(ULPI_CLK_PY0,         SPI1,         RSVD2,    UARTD,    ULPI),
+	PIN(ULPI_DIR_PY1,         SPI1,         RSVD2,    UARTD,    ULPI),
+	PIN(ULPI_NXT_PY2,         SPI1,         RSVD2,    UARTD,    ULPI),
+	PIN(ULPI_STP_PY3,         SPI1,         RSVD2,    UARTD,    ULPI),
+	PIN(DAP3_FS_PP0,          I2S2,         RSVD2,    DISPLAYA, DISPLAYB),
+	PIN(DAP3_DIN_PP1,         I2S2,         RSVD2,    DISPLAYA, DISPLAYB),
+	PIN(DAP3_DOUT_PP2,        I2S2,         RSVD2,    DISPLAYA, DISPLAYB),
+	PIN(DAP3_SCLK_PP3,        I2S2,         RSVD2,    DISPLAYA, DISPLAYB),
+	PIN(PV0,                  RSVD1,        RSVD2,    RSVD3,    RSVD4),
+	PIN(PV1,                  RSVD1,        RSVD2,    RSVD3,    RSVD4),
+	PIN(SDMMC1_CLK_PZ0,       SDMMC1,       RSVD2,    RSVD3,    UARTA),
+	PIN(SDMMC1_CMD_PZ1,       SDMMC1,       RSVD2,    RSVD3,    UARTA),
+	PIN(SDMMC1_DAT3_PY4,      SDMMC1,       RSVD2,    UARTE,    UARTA),
+	PIN(SDMMC1_DAT2_PY5,      SDMMC1,       RSVD2,    UARTE,    UARTA),
+	PIN(SDMMC1_DAT1_PY6,      SDMMC1,       RSVD2,    UARTE,    UARTA),
+	PIN(SDMMC1_DAT0_PY7,      SDMMC1,       RSVD2,    UARTE,    UARTA),
+	PIN(PV2,                  OWR,          RSVD2,    RSVD3,    RSVD4),
+	PIN(PV3,                  CLK_12M_OUT,  RSVD2,    RSVD3,    RSVD4),
+	PIN(CLK2_OUT_PW5,         EXTPERIPH2,   RSVD2,    RSVD3,    RSVD4),
+	PIN(CLK2_REQ_PCC5,        DAP,          RSVD2,    RSVD3,    RSVD4),
+	PIN(LCD_PWR1_PC1,         DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_PWR2_PC6,         DISPLAYA,     DISPLAYB, SPI5,     HDCP),
+	PIN(LCD_SDIN_PZ2,         DISPLAYA,     DISPLAYB, SPI5,     RSVD4),
+	PIN(LCD_SDOUT_PN5,        DISPLAYA,     DISPLAYB, SPI5,     HDCP),
+	PIN(LCD_WR_N_PZ3,         DISPLAYA,     DISPLAYB, SPI5,     HDCP),
+	PIN(LCD_CS0_N_PN4,        DISPLAYA,     DISPLAYB, SPI5,     RSVD4),
+	PIN(LCD_DC0_PN6,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_SCK_PZ4,          DISPLAYA,     DISPLAYB, SPI5,     HDCP),
+	PIN(LCD_PWR0_PB2,         DISPLAYA,     DISPLAYB, SPI5,     HDCP),
+	PIN(LCD_PCLK_PB3,         DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_DE_PJ1,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_HSYNC_PJ3,        DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_VSYNC_PJ4,        DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D0_PE0,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D1_PE1,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D2_PE2,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D3_PE3,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D4_PE4,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D5_PE5,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D6_PE6,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D7_PE7,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D8_PF0,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D9_PF1,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D10_PF2,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D11_PF3,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D12_PF4,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D13_PF5,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D14_PF6,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D15_PF7,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D16_PM0,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D17_PM1,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D18_PM2,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D19_PM3,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D20_PM4,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D21_PM5,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D22_PM6,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_D23_PM7,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_CS1_N_PW0,        DISPLAYA,     DISPLAYB, SPI5,     RSVD4),
+	PIN(LCD_M1_PW1,           DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(LCD_DC1_PD2,          DISPLAYA,     DISPLAYB, RSVD3,    RSVD4),
+	PIN(HDMI_INT_PN7,         HDMI,         RSVD2,    RSVD3,    RSVD4),
+	PIN(DDC_SCL_PV4,          I2C4,         RSVD2,    RSVD3,    RSVD4),
+	PIN(DDC_SDA_PV5,          I2C4,         RSVD2,    RSVD3,    RSVD4),
+	PIN(CRT_HSYNC_PV6,        CRT,          RSVD2,    RSVD3,    RSVD4),
+	PIN(CRT_VSYNC_PV7,        CRT,          RSVD2,    RSVD3,    RSVD4),
+	PIN(VI_D0_PT4,            DDR,          RSVD2,    VI,       RSVD4),
+	PIN(VI_D1_PD5,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D2_PL0,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D3_PL1,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D4_PL2,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D5_PL3,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D6_PL4,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D7_PL5,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D8_PL6,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D9_PL7,            DDR,          SDMMC2,   VI,       RSVD4),
+	PIN(VI_D10_PT2,           DDR,          RSVD2,    VI,       RSVD4),
+	PIN(VI_D11_PT3,           DDR,          RSVD2,    VI,       RSVD4),
+	PIN(VI_PCLK_PT0,          RSVD1,        SDMMC2,   VI,       RSVD4),
+	PIN(VI_MCLK_PT1,          VI,           VI_ALT1,  VI_ALT2,  VI_ALT3),
+	PIN(VI_VSYNC_PD6,         DDR,          RSVD2,    VI,       RSVD4),
+	PIN(VI_HSYNC_PD7,         DDR,          RSVD2,    VI,       RSVD4),
+	PIN(UART2_RXD_PC3,        UARTB,        SPDIF,    UARTA,    SPI4),
+	PIN(UART2_TXD_PC2,        UARTB,        SPDIF,    UARTA,    SPI4),
+	PIN(UART2_RTS_N_PJ6,      UARTA,        UARTB,    GMI,      SPI4),
+	PIN(UART2_CTS_N_PJ5,      UARTA,        UARTB,    GMI,      SPI4),
+	PIN(UART3_TXD_PW6,        UARTC,        RSVD2,    GMI,      RSVD4),
+	PIN(UART3_RXD_PW7,        UARTC,        RSVD2,    GMI,      RSVD4),
+	PIN(UART3_CTS_N_PA1,      UARTC,        RSVD2,    GMI,      RSVD4),
+	PIN(UART3_RTS_N_PC0,      UARTC,        PWM0,     GMI,      RSVD4),
+	PIN(PU0,                  OWR,          UARTA,    GMI,      RSVD4),
+	PIN(PU1,                  RSVD1,        UARTA,    GMI,      RSVD4),
+	PIN(PU2,                  RSVD1,        UARTA,    GMI,      RSVD4),
+	PIN(PU3,                  PWM0,         UARTA,    GMI,      RSVD4),
+	PIN(PU4,                  PWM1,         UARTA,    GMI,      RSVD4),
+	PIN(PU5,                  PWM2,         UARTA,    GMI,      RSVD4),
+	PIN(PU6,                  PWM3,         UARTA,    GMI,      RSVD4),
+	PIN(GEN1_I2C_SDA_PC5,     I2C1,         RSVD2,    RSVD3,    RSVD4),
+	PIN(GEN1_I2C_SCL_PC4,     I2C1,         RSVD2,    RSVD3,    RSVD4),
+	PIN(DAP4_FS_PP4,          I2S3,         RSVD2,    GMI,      RSVD4),
+	PIN(DAP4_DIN_PP5,         I2S3,         RSVD2,    GMI,      RSVD4),
+	PIN(DAP4_DOUT_PP6,        I2S3,         RSVD2,    GMI,      RSVD4),
+	PIN(DAP4_SCLK_PP7,        I2S3,         RSVD2,    GMI,      RSVD4),
+	PIN(CLK3_OUT_PEE0,        EXTPERIPH3,   RSVD2,    RSVD3,    RSVD4),
+	PIN(CLK3_REQ_PEE1,        DEV3,         RSVD2,    RSVD3,    RSVD4),
+	PIN(GMI_WP_N_PC7,         RSVD1,        NAND,     GMI,      GMI_ALT),
+	PIN(GMI_IORDY_PI5,        RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_WAIT_PI7,         RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_ADV_N_PK0,        RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_CLK_PK1,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_CS0_N_PJ0,        RSVD1,        NAND,     GMI,      DTV),
+	PIN(GMI_CS1_N_PJ2,        RSVD1,        NAND,     GMI,      DTV),
+	PIN(GMI_CS2_N_PK3,        RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_CS3_N_PK4,        RSVD1,        NAND,     GMI,      GMI_ALT),
+	PIN(GMI_CS4_N_PK2,        RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_CS6_N_PI3,        NAND,         NAND_ALT, GMI,      SATA),
+	PIN(GMI_CS7_N_PI6,        NAND,         NAND_ALT, GMI,      GMI_ALT),
+	PIN(GMI_AD0_PG0,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD1_PG1,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD2_PG2,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD3_PG3,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD4_PG4,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD5_PG5,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD6_PG6,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD7_PG7,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD8_PH0,          PWM0,         NAND,     GMI,      RSVD4),
+	PIN(GMI_AD9_PH1,          PWM1,         NAND,     GMI,      RSVD4),
+	PIN(GMI_AD10_PH2,         PWM2,         NAND,     GMI,      RSVD4),
+	PIN(GMI_AD11_PH3,         PWM3,         NAND,     GMI,      RSVD4),
+	PIN(GMI_AD12_PH4,         RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD13_PH5,         RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD14_PH6,         RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_AD15_PH7,         RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_A16_PJ7,          UARTD,        SPI4,     GMI,      GMI_ALT),
+	PIN(GMI_A17_PB0,          UARTD,        SPI4,     GMI,      DTV),
+	PIN(GMI_A18_PB1,          UARTD,        SPI4,     GMI,      DTV),
+	PIN(GMI_A19_PK7,          UARTD,        SPI4,     GMI,      RSVD4),
+	PIN(GMI_WR_N_PI0,         RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_OE_N_PI1,         RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_DQS_PI2,          RSVD1,        NAND,     GMI,      RSVD4),
+	PIN(GMI_RST_N_PI4,        NAND,         NAND_ALT, GMI,      RSVD4),
+	PIN(GEN2_I2C_SCL_PT5,     I2C2,         HDCP,     GMI,      RSVD4),
+	PIN(GEN2_I2C_SDA_PT6,     I2C2,         HDCP,     GMI,      RSVD4),
+	PIN(SDMMC4_CLK_PCC4,      INVALID,      NAND,     GMI,      SDMMC4),
+	PIN(SDMMC4_CMD_PT7,       I2C3,         NAND,     GMI,      SDMMC4),
+	PIN(SDMMC4_DAT0_PAA0,     UARTE,        SPI3,     GMI,      SDMMC4),
+	PIN(SDMMC4_DAT1_PAA1,     UARTE,        SPI3,     GMI,      SDMMC4),
+	PIN(SDMMC4_DAT2_PAA2,     UARTE,        SPI3,     GMI,      SDMMC4),
+	PIN(SDMMC4_DAT3_PAA3,     UARTE,        SPI3,     GMI,      SDMMC4),
+	PIN(SDMMC4_DAT4_PAA4,     I2C3,         I2S4,     GMI,      SDMMC4),
+	PIN(SDMMC4_DAT5_PAA5,     VGP3,         I2S4,     GMI,      SDMMC4),
+	PIN(SDMMC4_DAT6_PAA6,     VGP4,         I2S4,     GMI,      SDMMC4),
+	PIN(SDMMC4_DAT7_PAA7,     VGP5,         I2S4,     GMI,      SDMMC4),
+	PIN(SDMMC4_RST_N_PCC3,    VGP6,         RSVD2,    RSVD3,    SDMMC4),
+	PIN(CAM_MCLK_PCC0,        VI,           VI_ALT1,  VI_ALT3,  SDMMC4),
+	PIN(PCC1,                 I2S4,         RSVD2,    RSVD3,    SDMMC4),
+	PIN(PBB0,                 I2S4,         RSVD2,    RSVD3,    SDMMC4),
+	PIN(CAM_I2C_SCL_PBB1,     VGP1,         I2C3,     RSVD3,    SDMMC4),
+	PIN(CAM_I2C_SDA_PBB2,     VGP2,         I2C3,     RSVD3,    SDMMC4),
+	PIN(PBB3,                 VGP3,         DISPLAYA, DISPLAYB, SDMMC4),
+	PIN(PBB4,                 VGP4,         DISPLAYA, DISPLAYB, SDMMC4),
+	PIN(PBB5,                 VGP5,         DISPLAYA, DISPLAYB, SDMMC4),
+	PIN(PBB6,                 VGP6,         DISPLAYA, DISPLAYB, SDMMC4),
+	PIN(PBB7,                 I2S4,         RSVD2,    RSVD3,    SDMMC4),
+	PIN(PCC2,                 I2S4,         RSVD2,    RSVD3,    RSVD4),
+	PIN(JTAG_RTCK_PU7,        RTCK,         RSVD2,    RSVD3,    RSVD4),
+	PIN(PWR_I2C_SCL_PZ6,      I2CPWR,       RSVD2,    RSVD3,    RSVD4),
+	PIN(PWR_I2C_SDA_PZ7,      I2CPWR,       RSVD2,    RSVD3,    RSVD4),
+	PIN(KB_ROW0_PR0,          KBC,          NAND,     RSVD3,    RSVD4),
+	PIN(KB_ROW1_PR1,          KBC,          NAND,     RSVD3,    RSVD4),
+	PIN(KB_ROW2_PR2,          KBC,          NAND,     RSVD3,    RSVD4),
+	PIN(KB_ROW3_PR3,          KBC,          NAND,     RSVD3,    INVALID),
+	PIN(KB_ROW4_PR4,          KBC,          NAND,     TRACE,    RSVD4),
+	PIN(KB_ROW5_PR5,          KBC,          NAND,     TRACE,    OWR),
+	PIN(KB_ROW6_PR6,          KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW7_PR7,          KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW8_PS0,          KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW9_PS1,          KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW10_PS2,         KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW11_PS3,         KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW12_PS4,         KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW13_PS5,         KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW14_PS6,         KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_ROW15_PS7,         KBC,          NAND,     SDMMC2,   MIO),
+	PIN(KB_COL0_PQ0,          KBC,          NAND,     TRACE,    TEST),
+	PIN(KB_COL1_PQ1,          KBC,          NAND,     TRACE,    TEST),
+	PIN(KB_COL2_PQ2,          KBC,          NAND,     TRACE,    RSVD4),
+	PIN(KB_COL3_PQ3,          KBC,          NAND,     TRACE,    RSVD4),
+	PIN(KB_COL4_PQ4,          KBC,          NAND,     TRACE,    RSVD4),
+	PIN(KB_COL5_PQ5,          KBC,          NAND,     TRACE,    RSVD4),
+	PIN(KB_COL6_PQ6,          KBC,          NAND,     TRACE,    MIO),
+	PIN(KB_COL7_PQ7,          KBC,          NAND,     TRACE,    MIO),
+	PIN(CLK_32K_OUT_PA0,      BLINK,        RSVD2,    RSVD3,    RSVD4),
+	PIN(SYS_CLK_REQ_PZ5,      SYSCLK,       RSVD2,    RSVD3,    RSVD4),
+	PIN(CORE_PWR_REQ,         CORE_PWR_REQ, RSVD2,    RSVD3,    RSVD4),
+	PIN(CPU_PWR_REQ,          CPU_PWR_REQ,  RSVD2,    RSVD3,    RSVD4),
+	PIN(PWR_INT_N,            PWR_INT_N,    RSVD2,    RSVD3,    RSVD4),
+	PIN(CLK_32K_IN,           CLK_32K_IN,   RSVD2,    RSVD3,    RSVD4),
+	PIN(OWR,                  OWR,          CEC,      RSVD3,    RSVD4),
+	PIN(DAP1_FS_PN0,          I2S0,         HDA,      GMI,      SDMMC2),
+	PIN(DAP1_DIN_PN1,         I2S0,         HDA,      GMI,      SDMMC2),
+	PIN(DAP1_DOUT_PN2,        I2S0,         HDA,      GMI,      SDMMC2),
+	PIN(DAP1_SCLK_PN3,        I2S0,         HDA,      GMI,      SDMMC2),
+	PIN(CLK1_REQ_PEE2,        DAP,          HDA,      RSVD3,    RSVD4),
+	PIN(CLK1_OUT_PW4,         EXTPERIPH1,   RSVD2,    RSVD3,    RSVD4),
+	PIN(SPDIF_IN_PK6,         SPDIF,        HDA,      I2C1,     SDMMC2),
+	PIN(SPDIF_OUT_PK5,        SPDIF,        RSVD2,    I2C1,     SDMMC2),
+	PIN(DAP2_FS_PA2,          I2S1,         HDA,      RSVD3,    GMI),
+	PIN(DAP2_DIN_PA4,         I2S1,         HDA,      RSVD3,    GMI),
+	PIN(DAP2_DOUT_PA5,        I2S1,         HDA,      RSVD3,    GMI),
+	PIN(DAP2_SCLK_PA3,        I2S1,         HDA,      RSVD3,    GMI),
+	PIN(SPI2_MOSI_PX0,        SPI6,         SPI2,     SPI3,     GMI),
+	PIN(SPI2_MISO_PX1,        SPI6,         SPI2,     SPI3,     GMI),
+	PIN(SPI2_CS0_N_PX3,       SPI6,         SPI2,     SPI3,     GMI),
+	PIN(SPI2_SCK_PX2,         SPI6,         SPI2,     SPI3,     GMI),
+	PIN(SPI1_MOSI_PX4,        SPI2,         SPI1,     SPI2_ALT, GMI),
+	PIN(SPI1_SCK_PX5,         SPI2,         SPI1,     SPI2_ALT, GMI),
+	PIN(SPI1_CS0_N_PX6,       SPI2,         SPI1,     SPI2_ALT, GMI),
+	PIN(SPI1_MISO_PX7,        SPI3,         SPI1,     SPI2_ALT, RSVD4),
+	PIN(SPI2_CS1_N_PW2,       SPI3,         SPI2,     SPI2_ALT, I2C1),
+	PIN(SPI2_CS2_N_PW3,       SPI3,         SPI2,     SPI2_ALT, I2C1),
+	PIN(SDMMC3_CLK_PA6,       UARTA,        PWM2,     SDMMC3,   SPI3),
+	PIN(SDMMC3_CMD_PA7,       UARTA,        PWM3,     SDMMC3,   SPI2),
+	PIN(SDMMC3_DAT0_PB7,      RSVD1,        RSVD2,    SDMMC3,   SPI3),
+	PIN(SDMMC3_DAT1_PB6,      RSVD1,        RSVD2,    SDMMC3,   SPI3),
+	PIN(SDMMC3_DAT2_PB5,      RSVD1,        PWM1,     SDMMC3,   SPI3),
+	PIN(SDMMC3_DAT3_PB4,      RSVD1,        PWM0,     SDMMC3,   SPI3),
+	PIN(SDMMC3_DAT4_PD1,      PWM1,         SPI4,     SDMMC3,   SPI2),
+	PIN(SDMMC3_DAT5_PD0,      PWM0,         SPI4,     SDMMC3,   SPI2),
+	PIN(SDMMC3_DAT6_PD3,      SPDIF,        SPI4,     SDMMC3,   SPI2),
+	PIN(SDMMC3_DAT7_PD4,      SPDIF,        SPI4,     SDMMC3,   SPI2),
+	PIN(PEX_L0_PRSNT_N_PDD0,  PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_L0_RST_N_PDD1,    PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_L0_CLKREQ_N_PDD2, PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_WAKE_N_PDD3,      PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_L1_PRSNT_N_PDD4,  PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_L1_RST_N_PDD5,    PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_L1_CLKREQ_N_PDD6, PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_L2_PRSNT_N_PDD7,  PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_L2_RST_N_PCC6,    PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(PEX_L2_CLKREQ_N_PCC7, PCIE,         HDA,      RSVD3,    RSVD4),
+	PIN(HDMI_CEC_PEE3,        CEC,          RSVD2,    RSVD3,    RSVD4),
+};
+const struct pmux_pingrp_desc *tegra_soc_pingroups = tegra30_pingroups;
diff --git a/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-common.c b/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-common.c
new file mode 100644
index 000000000..e56e27c8b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-common.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2015, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#define pr_fmt(fmt) "tegra-xusb-padctl: " fmt
+
+#include <common.h>
+#include <errno.h>
+#include <log.h>
+
+#include "xusb-padctl-common.h"
+
+#include <asm/arch/clock.h>
+
+int tegra_xusb_phy_prepare(struct tegra_xusb_phy *phy)
+{
+	if (phy && phy->ops && phy->ops->prepare)
+		return phy->ops->prepare(phy);
+
+	return phy ? -ENOSYS : -EINVAL;
+}
+
+int tegra_xusb_phy_enable(struct tegra_xusb_phy *phy)
+{
+	if (phy && phy->ops && phy->ops->enable)
+		return phy->ops->enable(phy);
+
+	return phy ? -ENOSYS : -EINVAL;
+}
+
+int tegra_xusb_phy_disable(struct tegra_xusb_phy *phy)
+{
+	if (phy && phy->ops && phy->ops->disable)
+		return phy->ops->disable(phy);
+
+	return phy ? -ENOSYS : -EINVAL;
+}
+
+int tegra_xusb_phy_unprepare(struct tegra_xusb_phy *phy)
+{
+	if (phy && phy->ops && phy->ops->unprepare)
+		return phy->ops->unprepare(phy);
+
+	return phy ? -ENOSYS : -EINVAL;
+}
+
+struct tegra_xusb_phy *tegra_xusb_phy_get(unsigned int type)
+{
+	struct tegra_xusb_phy *phy;
+	int i;
+
+	for (i = 0; i < padctl.socdata->num_phys; i++) {
+		phy = &padctl.socdata->phys[i];
+		if (phy->type != type)
+			continue;
+		return phy;
+	}
+
+	return NULL;
+}
+
+static const struct tegra_xusb_padctl_lane *
+tegra_xusb_padctl_find_lane(struct tegra_xusb_padctl *padctl, const char *name)
+{
+	unsigned int i;
+
+	for (i = 0; i < padctl->socdata->num_lanes; i++)
+		if (strcmp(name, padctl->socdata->lanes[i].name) == 0)
+			return &padctl->socdata->lanes[i];
+
+	return NULL;
+}
+
+static int
+tegra_xusb_padctl_group_parse_dt(struct tegra_xusb_padctl *padctl,
+				 struct tegra_xusb_padctl_group *group,
+				 ofnode node)
+{
+	unsigned int i;
+	int len, ret;
+
+	group->name = ofnode_get_name(node);
+
+	len = ofnode_read_string_count(node, "nvidia,lanes");
+	if (len < 0) {
+		pr_err("failed to parse \"nvidia,lanes\" property");
+		return -EINVAL;
+	}
+
+	group->num_pins = len;
+
+	for (i = 0; i < group->num_pins; i++) {
+		ret = ofnode_read_string_index(node, "nvidia,lanes", i,
+					       &group->pins[i]);
+		if (ret) {
+			pr_err("failed to read string from \"nvidia,lanes\" property");
+			return -EINVAL;
+		}
+	}
+
+	group->num_pins = len;
+
+	ret = ofnode_read_string_index(node, "nvidia,function", 0,
+				       &group->func);
+	if (ret) {
+		pr_err("failed to parse \"nvidia,func\" property");
+		return -EINVAL;
+	}
+
+	group->iddq = ofnode_read_u32_default(node, "nvidia,iddq", -1);
+
+	return 0;
+}
+
+static int tegra_xusb_padctl_find_function(struct tegra_xusb_padctl *padctl,
+					   const char *name)
+{
+	unsigned int i;
+
+	for (i = 0; i < padctl->socdata->num_functions; i++)
+		if (strcmp(name, padctl->socdata->functions[i]) == 0)
+			return i;
+
+	return -ENOENT;
+}
+
+static int
+tegra_xusb_padctl_lane_find_function(struct tegra_xusb_padctl *padctl,
+				     const struct tegra_xusb_padctl_lane *lane,
+				     const char *name)
+{
+	unsigned int i;
+	int func;
+
+	func = tegra_xusb_padctl_find_function(padctl, name);
+	if (func < 0)
+		return func;
+
+	for (i = 0; i < lane->num_funcs; i++)
+		if (lane->funcs[i] == func)
+			return i;
+
+	return -ENOENT;
+}
+
+static int
+tegra_xusb_padctl_group_apply(struct tegra_xusb_padctl *padctl,
+			      const struct tegra_xusb_padctl_group *group)
+{
+	unsigned int i;
+
+	for (i = 0; i < group->num_pins; i++) {
+		const struct tegra_xusb_padctl_lane *lane;
+		unsigned int func;
+		u32 value;
+
+		lane = tegra_xusb_padctl_find_lane(padctl, group->pins[i]);
+		if (!lane) {
+			pr_err("no lane for pin %s", group->pins[i]);
+			continue;
+		}
+
+		func = tegra_xusb_padctl_lane_find_function(padctl, lane,
+							    group->func);
+		if (func < 0) {
+			pr_err("function %s invalid for lane %s: %d",
+			      group->func, lane->name, func);
+			continue;
+		}
+
+		value = padctl_readl(padctl, lane->offset);
+
+		/* set pin function */
+		value &= ~(lane->mask << lane->shift);
+		value |= func << lane->shift;
+
+		/*
+		 * Set IDDQ if supported on the lane and specified in the
+		 * configuration.
+		 */
+		if (lane->iddq > 0 && group->iddq >= 0) {
+			if (group->iddq != 0)
+				value &= ~(1 << lane->iddq);
+			else
+				value |= 1 << lane->iddq;
+		}
+
+		padctl_writel(padctl, value, lane->offset);
+	}
+
+	return 0;
+}
+
+static int
+tegra_xusb_padctl_config_apply(struct tegra_xusb_padctl *padctl,
+			       struct tegra_xusb_padctl_config *config)
+{
+	unsigned int i;
+
+	for (i = 0; i < config->num_groups; i++) {
+		const struct tegra_xusb_padctl_group *group;
+		int err;
+
+		group = &config->groups[i];
+
+		err = tegra_xusb_padctl_group_apply(padctl, group);
+		if (err < 0) {
+			pr_err("failed to apply group %s: %d",
+			      group->name, err);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+static int
+tegra_xusb_padctl_config_parse_dt(struct tegra_xusb_padctl *padctl,
+				  struct tegra_xusb_padctl_config *config,
+				  ofnode node)
+{
+	ofnode subnode;
+
+	config->name = ofnode_get_name(node);
+
+	ofnode_for_each_subnode(subnode, node) {
+		struct tegra_xusb_padctl_group *group;
+		int err;
+
+		group = &config->groups[config->num_groups];
+
+		err = tegra_xusb_padctl_group_parse_dt(padctl, group, subnode);
+		if (err < 0) {
+			pr_err("failed to parse group %s", group->name);
+			return err;
+		}
+
+		config->num_groups++;
+	}
+
+	return 0;
+}
+
+static int tegra_xusb_padctl_parse_dt(struct tegra_xusb_padctl *padctl,
+				      ofnode node)
+{
+	ofnode subnode;
+	int err;
+
+	err = ofnode_read_resource(node, 0, &padctl->regs);
+	if (err < 0) {
+		pr_err("registers not found");
+		return err;
+	}
+
+	ofnode_for_each_subnode(subnode, node) {
+		struct tegra_xusb_padctl_config *config = &padctl->config;
+
+		debug("%s: subnode=%s\n", __func__, ofnode_get_name(subnode));
+		err = tegra_xusb_padctl_config_parse_dt(padctl, config,
+							subnode);
+		if (err < 0) {
+			pr_err("failed to parse entry %s: %d",
+			      config->name, err);
+			continue;
+		}
+	}
+	debug("%s: done\n", __func__);
+
+	return 0;
+}
+
+struct tegra_xusb_padctl padctl;
+
+int tegra_xusb_process_nodes(ofnode nodes[], unsigned int count,
+			     const struct tegra_xusb_padctl_soc *socdata)
+{
+	unsigned int i;
+	int err;
+
+	debug("%s: count=%d\n", __func__, count);
+	for (i = 0; i < count; i++) {
+		debug("%s: i=%d, node=%p\n", __func__, i, nodes[i].np);
+		if (!ofnode_is_available(nodes[i]))
+			continue;
+
+		padctl.socdata = socdata;
+
+		err = tegra_xusb_padctl_parse_dt(&padctl, nodes[i]);
+		if (err < 0) {
+			pr_err("failed to parse DT: %d", err);
+			continue;
+		}
+
+		/* deassert XUSB padctl reset */
+		reset_set_enable(PERIPH_ID_XUSB_PADCTL, 0);
+
+		err = tegra_xusb_padctl_config_apply(&padctl, &padctl.config);
+		if (err < 0) {
+			pr_err("failed to apply pinmux: %d", err);
+			continue;
+		}
+
+		/* only a single instance is supported */
+		break;
+	}
+	debug("%s: done\n", __func__);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-common.h b/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-common.h
new file mode 100644
index 000000000..e3fd613f2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-common.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2014-2015, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _TEGRA_XUSB_PADCTL_COMMON_H_
+#define _TEGRA_XUSB_PADCTL_COMMON_H_
+
+#include <common.h>
+#include <fdtdec.h>
+#include <dm/ofnode.h>
+
+#include <asm/io.h>
+#include <asm/arch-tegra/xusb-padctl.h>
+#include <linux/ioport.h>
+
+struct tegra_xusb_padctl_lane {
+	const char *name;
+
+	unsigned int offset;
+	unsigned int shift;
+	unsigned int mask;
+	unsigned int iddq;
+
+	const unsigned int *funcs;
+	unsigned int num_funcs;
+};
+
+struct tegra_xusb_phy_ops {
+	int (*prepare)(struct tegra_xusb_phy *phy);
+	int (*enable)(struct tegra_xusb_phy *phy);
+	int (*disable)(struct tegra_xusb_phy *phy);
+	int (*unprepare)(struct tegra_xusb_phy *phy);
+};
+
+struct tegra_xusb_phy {
+	unsigned int type;
+	const struct tegra_xusb_phy_ops *ops;
+	struct tegra_xusb_padctl *padctl;
+};
+
+struct tegra_xusb_padctl_pin {
+	const struct tegra_xusb_padctl_lane *lane;
+
+	unsigned int func;
+	int iddq;
+};
+
+#define MAX_GROUPS 5
+#define MAX_PINS 7
+
+struct tegra_xusb_padctl_group {
+	const char *name;
+
+	const char *pins[MAX_PINS];
+	unsigned int num_pins;
+
+	const char *func;
+	int iddq;
+};
+
+struct tegra_xusb_padctl_soc {
+	const struct tegra_xusb_padctl_lane *lanes;
+	unsigned int num_lanes;
+	const char *const *functions;
+	unsigned int num_functions;
+	struct tegra_xusb_phy *phys;
+	unsigned int num_phys;
+};
+
+struct tegra_xusb_padctl_config {
+	const char *name;
+
+	struct tegra_xusb_padctl_group groups[MAX_GROUPS];
+	unsigned int num_groups;
+};
+
+struct tegra_xusb_padctl {
+	const struct tegra_xusb_padctl_soc *socdata;
+	struct tegra_xusb_padctl_config config;
+	struct resource regs;
+	unsigned int enable;
+
+};
+extern struct tegra_xusb_padctl padctl;
+
+static inline u32 padctl_readl(struct tegra_xusb_padctl *padctl,
+			       unsigned long offset)
+{
+	return readl(padctl->regs.start + offset);
+}
+
+static inline void padctl_writel(struct tegra_xusb_padctl *padctl,
+				 u32 value, unsigned long offset)
+{
+	writel(value, padctl->regs.start + offset);
+}
+
+int tegra_xusb_process_nodes(ofnode nodes[], unsigned int count,
+			     const struct tegra_xusb_padctl_soc *socdata);
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-dummy.c b/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-dummy.c
new file mode 100644
index 000000000..f2d90302f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-tegra/xusb-padctl-dummy.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <common.h>
+#include <errno.h>
+
+#include <asm/arch-tegra/xusb-padctl.h>
+
+struct tegra_xusb_phy * __weak tegra_xusb_phy_get(unsigned int type)
+{
+	return NULL;
+}
+
+int __weak tegra_xusb_phy_prepare(struct tegra_xusb_phy *phy)
+{
+	return -ENOSYS;
+}
+
+int __weak tegra_xusb_phy_enable(struct tegra_xusb_phy *phy)
+{
+	return -ENOSYS;
+}
+
+int __weak tegra_xusb_phy_disable(struct tegra_xusb_phy *phy)
+{
+	return -ENOSYS;
+}
+
+int __weak tegra_xusb_phy_unprepare(struct tegra_xusb_phy *phy)
+{
+	return -ENOSYS;
+}
+
+void __weak tegra_xusb_padctl_init(void)
+{
+}
+
+void __weak tegra_xusb_padctl_exit(void)
+{
+}
diff --git a/roms/u-boot/arch/arm/mach-u8500/Kconfig b/roms/u-boot/arch/arm/mach-u8500/Kconfig
new file mode 100644
index 000000000..7478deb25
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-u8500/Kconfig
@@ -0,0 +1,27 @@
+if ARCH_U8500
+
+config SYS_SOC
+	default "u8500"
+
+choice
+	prompt "U8500 board selection"
+
+config TARGET_STEMMY
+	bool "Samsung (stemmy) board"
+	help
+	  The Samsung "stemmy" board supports Samsung smartphones released with
+	  the ST-Ericsson NovaThor U8500 SoC, e.g.
+
+	      - Samsung Galaxy S III mini (GT-I8190)	"golden"
+	      - Samsung Galaxy S Advance (GT-I9070)	"janice"
+	      - Samsung Galaxy Xcover 2 (GT-S7710)	"skomer"
+
+	  and likely others as well (untested).
+
+	  See board/ste/stemmy/README for details.
+
+endchoice
+
+source "board/ste/stemmy/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-u8500/Makefile b/roms/u-boot/arch/arm/mach-u8500/Makefile
new file mode 100644
index 000000000..0a53cbd9a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-u8500/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+obj-y	+= cache.o
+obj-$(CONFIG_DISPLAY_CPUINFO)	+= cpuinfo.o
diff --git a/roms/u-boot/arch/arm/mach-u8500/cache.c b/roms/u-boot/arch/arm/mach-u8500/cache.c
new file mode 100644
index 000000000..f9fd4fe7d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-u8500/cache.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 Stephan Gerhold <stephan@gerhold.net>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/armv7.h>
+#include <asm/cache.h>
+#include <asm/pl310.h>
+
+#define PL310_WAY_MASK	0xff
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
+
+#ifdef CONFIG_SYS_L2_PL310
+void v7_outer_cache_disable(void)
+{
+	struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+
+	/*
+	 * Linux expects the L2 cache to be turned off by the bootloader.
+	 * Otherwise, it fails very early (shortly after decompressing the kernel).
+	 *
+	 * On U8500, the L2 cache can be only turned on/off from the secure world.
+	 * Instead, prevent usage of the L2 cache by locking all ways.
+	 * The kernel needs to unlock them to make the L2 cache work again.
+	 */
+	writel(PL310_WAY_MASK, &pl310->pl310_lockdown_dbase);
+	writel(PL310_WAY_MASK, &pl310->pl310_lockdown_ibase);
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-u8500/cpuinfo.c b/roms/u-boot/arch/arm/mach-u8500/cpuinfo.c
new file mode 100644
index 000000000..ab05b8a51
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-u8500/cpuinfo.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 Stephan Gerhold <stephan@gerhold.net>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+
+#define U8500_BOOTROM_BASE	0x90000000
+#define U8500_ASIC_ID_LOC_V2	(U8500_BOOTROM_BASE + 0x1DBF4)
+
+int print_cpuinfo(void)
+{
+	/* Convert ASIC ID to display string, e.g. 0x8520A0 => DB8520 V1.0 */
+	u32 asicid = readl(U8500_ASIC_ID_LOC_V2);
+	u32 cpu = (asicid >> 8) & 0xffff;
+	u32 rev = asicid & 0xff;
+
+	/* 0xA0 => 0x10 (V1.0) */
+	if (rev >= 0xa0)
+		rev -= 0x90;
+
+	printf("CPU: ST-Ericsson DB%x V%d.%d\n", cpu, rev >> 4, rev & 0xf);
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/Kconfig b/roms/u-boot/arch/arm/mach-uniphier/Kconfig
new file mode 100644
index 000000000..3a8eee7b8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/Kconfig
@@ -0,0 +1,120 @@
+if ARCH_UNIPHIER
+
+config SYS_CONFIG_NAME
+	default "uniphier"
+
+choice
+        prompt "UniPhier SoC select"
+
+config ARCH_UNIPHIER_V7_MULTI
+	bool "UniPhier V7 SoCs"
+	select ARCH_SUPPORT_PSCI
+	select ARMV7_NONSEC
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+
+config ARCH_UNIPHIER_V8_MULTI
+	bool "UniPhier V8 SoCs"
+	depends on !SPL
+	select ARM64
+	select CMD_UNZIP
+
+endchoice
+
+config ARCH_UNIPHIER_LD4
+	bool "Enable UniPhier LD4 SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00040000
+	default y
+
+config ARCH_UNIPHIER_SLD8
+	bool "Enable UniPhier sLD8 SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00040000
+	default y
+
+config ARCH_UNIPHIER_PRO4
+	bool "Enable UniPhier Pro4 SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00100000
+	default y
+
+config ARCH_UNIPHIER_PRO5
+	bool "Enable UniPhier Pro5 SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00100000
+	default y
+
+config ARCH_UNIPHIER_PXS2
+	bool "Enable UniPhier Pxs2 SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00100000
+	default y
+
+config ARCH_UNIPHIER_LD6B
+	bool "Enable UniPhier LD6b SoC support"
+	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00100000
+	default y
+
+config ARCH_UNIPHIER_LD11
+	bool "Enable UniPhier LD11 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+
+config ARCH_UNIPHIER_LD20
+	bool "Enable UniPhier LD20 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+	select OF_BOARD_SETUP
+
+config ARCH_UNIPHIER_PXS3
+	bool "Enable UniPhier PXs3 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+
+config CACHE_UNIPHIER
+	bool "Enable the UniPhier L2 cache controller"
+	depends on ARCH_UNIPHIER_V7_MULTI
+	default y
+	select SYS_CACHE_SHIFT_7
+	help
+	  This option allows to use the UniPhier System Cache as L2 cache.
+
+config MICRO_SUPPORT_CARD
+	bool "Use Micro Support Card"
+	depends on UNIPHIER_SYSTEM_BUS
+	help
+	  This option provides support for the expansion board, available
+	  on some UniPhier reference boards.
+
+	  Say Y to use the on-board UART, Ether, LED devices.
+
+config CMD_PINMON
+	bool "Enable boot mode pins monitor command"
+	default y
+	help
+	  The command "pinmon" shows the state of the boot mode pins.
+	  The boot mode pins are latched when the system reset is deasserted
+	  and determine which device the system should load a boot image from.
+
+config CMD_DDRPHY_DUMP
+	bool "Enable dump command of DDR PHY parameters"
+	depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+		ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
+	default y
+	help
+	  The command "ddrphy" shows the resulting parameters of DDR PHY
+	  training; it is useful for the evaluation of DDR PHY training.
+
+config CMD_DDRMPHY_DUMP
+	bool "Enable dump command of DDR Multi PHY parameters"
+	depends on ARCH_UNIPHIER_PXS2 || ARCH_UNIPHIER_LD6B
+	default y
+	help
+	  The command "ddrmphy" shows the resulting parameters of DDR Multi PHY
+	  training; it is useful for the evaluation of DDR Multi PHY training.
+
+config SYS_SOC
+	default "uniphier-v7" if ARCH_UNIPHIER_V7_MULTI
+endif
diff --git a/roms/u-boot/arch/arm/mach-uniphier/Makefile b/roms/u-boot/arch/arm/mach-uniphier/Makefile
new file mode 100644
index 000000000..d333b7091
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/Makefile
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+ifdef CONFIG_SPL_BUILD
+
+obj-y += boards.o
+obj-y += spl_board_init.o
+obj-y += memconf.o
+obj-y += bcu/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc-boot-mode.o
+
+else
+
+obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
+obj-y += dram_init.o
+obj-y += board_init.o
+obj-$(CONFIG_ARCH_UNIPHIER_V8_MULTI) += base-address.o
+obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
+ifndef CONFIG_SYSRESET
+obj-y += reset.o
+endif
+
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
+obj-$(CONFIG_MMC) += mmc-first-dev.o
+obj-y += fdt-fixup.o
+
+endif
+
+obj-y += soc-info.o
+obj-y += boot-device/
+obj-y += clk/
+obj-y += dram/
+
+obj-$(CONFIG_DEBUG_UART_UNIPHIER) += debug-uart/
+
+obj-$(CONFIG_CPU_V7A) += arm32/
+obj-$(CONFIG_ARM64) += arm64/
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/Makefile b/roms/u-boot/arch/arm/mach-uniphier/arm32/Makefile
new file mode 100644
index 000000000..3cd00b7e5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+ifdef CONFIG_SPL_BUILD
+obj-y += lowlevel_init.o
+obj-$(CONFIG_DEBUG_LL) += debug_ll.o
+else
+obj-y += late_lowlevel_init.o
+obj-y += cache-uniphier.o
+obj-$(CONFIG_ARMV7_PSCI) += psci.o psci_smp.o
+endif
+
+obj-y += timer.o
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/arm-mpcore.h b/roms/u-boot/arch/arm/mach-uniphier/arm32/arm-mpcore.h
new file mode 100644
index 000000000..27eac90a0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/arm-mpcore.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ */
+
+#ifndef ARCH_ARM_MPCORE_H
+#define ARCH_ARM_MPCORE_H
+
+/* Snoop Control Unit */
+#define SCU_OFFSET		0x00
+
+/* SCU Control Register */
+#define SCU_CTRL		0x00
+#define SCU_ENABLE		(1 << 0)
+#define SCU_STANDBY_ENABLE	(1 << 5)
+
+/* SCU Configuration Register */
+#define SCU_CONF		0x04
+/* SCU CPU Power Status Register */
+#define SCU_PWR_STATUS		0x08
+/* SCU Invalidate All Registers in Secure State */
+#define SCU_INV_ALL		0x0C
+/* SCU Filtering Start Address Register */
+#define SCU_FILTER_START	0x40
+/* SCU Filtering End Address Register */
+#define SCU_FILTER_END		0x44
+/* SCU Access Control Register */
+#define SCU_SAC			0x50
+/* SCU Non-secure Access Control Register */
+#define SCU_SNSAC		0x54
+
+/* Global Timer */
+#define GLOBAL_TIMER_OFFSET	0x200
+
+/* Global Timer Counter Registers */
+#define GTIMER_CNT_L		0x00
+#define GTIMER_CNT_H		0x04
+/* Global Timer Control Register */
+#define GTIMER_CTRL		0x08
+/* Global Timer Interrupt Status Register */
+#define GTIMER_STAT		0x0C
+/* Comparator Value Registers */
+#define GTIMER_CMP_L		0x10
+#define GTIMER_CMP_H		0x14
+/* Auto-increment Register */
+#define GTIMER_INC		0x18
+
+#endif /* ARCH_ARM_MPCORE_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/cache-uniphier.c b/roms/u-boot/arch/arm/mach-uniphier/arm32/cache-uniphier.c
new file mode 100644
index 000000000..cde2a8124
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/cache-uniphier.c
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <cpu_func.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <asm/armv7.h>
+#include <asm/processor.h>
+
+#include "cache-uniphier.h"
+
+/* control registers */
+#define UNIPHIER_SSCC		0x500c0000	/* Control Register */
+#define    UNIPHIER_SSCC_BST			(0x1 << 20)	/* UCWG burst read */
+#define    UNIPHIER_SSCC_ACT			(0x1 << 19)	/* Inst-Data separate */
+#define    UNIPHIER_SSCC_WTG			(0x1 << 18)	/* WT gathering on */
+#define    UNIPHIER_SSCC_PRD			(0x1 << 17)	/* enable pre-fetch */
+#define    UNIPHIER_SSCC_ON			(0x1 <<  0)	/* enable cache */
+#define UNIPHIER_SSCLPDAWCR	0x500c0030	/* Unified/Data Active Way Control */
+#define UNIPHIER_SSCLPIAWCR	0x500c0034	/* Instruction Active Way Control */
+
+/* revision registers */
+#define UNIPHIER_SSCID		0x503c0100	/* ID Register */
+
+/* operation registers */
+#define UNIPHIER_SSCOPE		0x506c0244	/* Cache Operation Primitive Entry */
+#define    UNIPHIER_SSCOPE_CM_INV		0x0	/* invalidate */
+#define    UNIPHIER_SSCOPE_CM_CLEAN		0x1	/* clean */
+#define    UNIPHIER_SSCOPE_CM_FLUSH		0x2	/* flush */
+#define    UNIPHIER_SSCOPE_CM_SYNC		0x8	/* sync (drain bufs) */
+#define    UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH	0x9	/* flush p-fetch buf */
+#define UNIPHIER_SSCOQM		0x506c0248
+#define    UNIPHIER_SSCOQM_TID_MASK		(0x3 << 21)
+#define    UNIPHIER_SSCOQM_TID_LRU_DATA		(0x0 << 21)
+#define    UNIPHIER_SSCOQM_TID_LRU_INST		(0x1 << 21)
+#define    UNIPHIER_SSCOQM_TID_WAY		(0x2 << 21)
+#define    UNIPHIER_SSCOQM_S_MASK		(0x3 << 17)
+#define    UNIPHIER_SSCOQM_S_RANGE		(0x0 << 17)
+#define    UNIPHIER_SSCOQM_S_ALL		(0x1 << 17)
+#define    UNIPHIER_SSCOQM_S_WAY		(0x2 << 17)
+#define    UNIPHIER_SSCOQM_CE			(0x1 << 15)	/* notify completion */
+#define    UNIPHIER_SSCOQM_CW			(0x1 << 14)
+#define    UNIPHIER_SSCOQM_CM_MASK		(0x7)
+#define    UNIPHIER_SSCOQM_CM_INV		0x0	/* invalidate */
+#define    UNIPHIER_SSCOQM_CM_CLEAN		0x1	/* clean */
+#define    UNIPHIER_SSCOQM_CM_FLUSH		0x2	/* flush */
+#define    UNIPHIER_SSCOQM_CM_PREFETCH		0x3	/* prefetch to cache */
+#define    UNIPHIER_SSCOQM_CM_PREFETCH_BUF	0x4	/* prefetch to pf-buf */
+#define    UNIPHIER_SSCOQM_CM_TOUCH		0x5	/* touch */
+#define    UNIPHIER_SSCOQM_CM_TOUCH_ZERO	0x6	/* touch to zero */
+#define    UNIPHIER_SSCOQM_CM_TOUCH_DIRTY	0x7	/* touch with dirty */
+#define UNIPHIER_SSCOQAD	0x506c024c	/* Cache Operation Queue Address */
+#define UNIPHIER_SSCOQSZ	0x506c0250	/* Cache Operation Queue Size */
+#define UNIPHIER_SSCOQMASK	0x506c0254	/* Cache Operation Queue Address Mask */
+#define UNIPHIER_SSCOQWN	0x506c0258	/* Cache Operation Queue Way Number */
+#define UNIPHIER_SSCOPPQSEF	0x506c025c	/* Cache Operation Queue Set Complete */
+#define    UNIPHIER_SSCOPPQSEF_FE		(0x1 << 1)
+#define    UNIPHIER_SSCOPPQSEF_OE		(0x1 << 0)
+#define UNIPHIER_SSCOLPQS	0x506c0260	/* Cache Operation Queue Status */
+#define    UNIPHIER_SSCOLPQS_EF			(0x1 << 2)
+#define    UNIPHIER_SSCOLPQS_EST		(0x1 << 1)
+#define    UNIPHIER_SSCOLPQS_QST		(0x1 << 0)
+
+#define UNIPHIER_SSC_LINE_SIZE		128
+#define UNIPHIER_SSC_RANGE_OP_MAX_SIZE	(0x00400000 - (UNIPHIER_SSC_LINE_SIZE))
+
+#define UNIPHIER_SSCOQAD_IS_NEEDED(op) \
+		((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
+#define UNIPHIER_SSCOQWM_IS_NEEDED(op) \
+		(((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_WAY) || \
+		 ((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY))
+
+/* uniphier_cache_sync - perform a sync point for a particular cache level */
+static void uniphier_cache_sync(void)
+{
+	/* drain internal buffers */
+	writel(UNIPHIER_SSCOPE_CM_SYNC, UNIPHIER_SSCOPE);
+	/* need a read back to confirm */
+	readl(UNIPHIER_SSCOPE);
+}
+
+/**
+ * uniphier_cache_maint_common - run a queue operation
+ *
+ * @start: start address of range operation (don't care for "all" operation)
+ * @size: data size of range operation (don't care for "all" operation)
+ * @ways: target ways (don't care for operations other than pre-fetch, touch
+ * @operation: flags to specify the desired cache operation
+ */
+static void uniphier_cache_maint_common(u32 start, u32 size, u32 ways,
+					u32 operation)
+{
+	/* clear the complete notification flag */
+	writel(UNIPHIER_SSCOLPQS_EF, UNIPHIER_SSCOLPQS);
+
+	do {
+		/* set cache operation */
+		writel(UNIPHIER_SSCOQM_CE | operation, UNIPHIER_SSCOQM);
+
+		/* set address range if needed */
+		if (likely(UNIPHIER_SSCOQAD_IS_NEEDED(operation))) {
+			writel(start, UNIPHIER_SSCOQAD);
+			writel(size, UNIPHIER_SSCOQSZ);
+		}
+
+		/* set target ways if needed */
+		if (unlikely(UNIPHIER_SSCOQWM_IS_NEEDED(operation)))
+			writel(ways, UNIPHIER_SSCOQWN);
+	} while (unlikely(readl(UNIPHIER_SSCOPPQSEF) &
+			  (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
+
+	/* wait until the operation is completed */
+	while (likely(readl(UNIPHIER_SSCOLPQS) != UNIPHIER_SSCOLPQS_EF))
+		cpu_relax();
+}
+
+static void uniphier_cache_maint_all(u32 operation)
+{
+	uniphier_cache_maint_common(0, 0, 0, UNIPHIER_SSCOQM_S_ALL | operation);
+
+	uniphier_cache_sync();
+}
+
+static void uniphier_cache_maint_range(u32 start, u32 end, u32 ways,
+				       u32 operation)
+{
+	u32 size;
+
+	/*
+	 * If the start address is not aligned,
+	 * perform a cache operation for the first cache-line
+	 */
+	start = start & ~(UNIPHIER_SSC_LINE_SIZE - 1);
+
+	size = end - start;
+
+	if (unlikely(size >= (u32)(-UNIPHIER_SSC_LINE_SIZE))) {
+		/* this means cache operation for all range */
+		uniphier_cache_maint_all(operation);
+		return;
+	}
+
+	/*
+	 * If the end address is not aligned,
+	 * perform a cache operation for the last cache-line
+	 */
+	size = ALIGN(size, UNIPHIER_SSC_LINE_SIZE);
+
+	while (size) {
+		u32 chunk_size = min_t(u32, size, UNIPHIER_SSC_RANGE_OP_MAX_SIZE);
+
+		uniphier_cache_maint_common(start, chunk_size, ways,
+					    UNIPHIER_SSCOQM_S_RANGE | operation);
+
+		start += chunk_size;
+		size -= chunk_size;
+	}
+
+	uniphier_cache_sync();
+}
+
+void uniphier_cache_prefetch_range(u32 start, u32 end, u32 ways)
+{
+	uniphier_cache_maint_range(start, end, ways,
+				   UNIPHIER_SSCOQM_TID_WAY |
+				   UNIPHIER_SSCOQM_CM_PREFETCH);
+}
+
+void uniphier_cache_touch_range(u32 start, u32 end, u32 ways)
+{
+	uniphier_cache_maint_range(start, end, ways,
+				   UNIPHIER_SSCOQM_TID_WAY |
+				   UNIPHIER_SSCOQM_CM_TOUCH);
+}
+
+void uniphier_cache_touch_zero_range(u32 start, u32 end, u32 ways)
+{
+	uniphier_cache_maint_range(start, end, ways,
+				   UNIPHIER_SSCOQM_TID_WAY |
+				   UNIPHIER_SSCOQM_CM_TOUCH_ZERO);
+}
+
+void uniphier_cache_inv_way(u32 ways)
+{
+	uniphier_cache_maint_common(0, 0, ways,
+				    UNIPHIER_SSCOQM_S_WAY |
+				    UNIPHIER_SSCOQM_CM_INV);
+}
+
+void uniphier_cache_set_active_ways(int cpu, u32 active_ways)
+{
+	void __iomem *base = (void __iomem *)UNIPHIER_SSCC + 0xc00;
+
+	switch (readl(UNIPHIER_SSCID)) { /* revision */
+	case 0x12:	/* LD4 */
+	case 0x16:	/* sld8 */
+		base = (void __iomem *)UNIPHIER_SSCC + 0x840;
+		break;
+	default:
+		base = (void __iomem *)UNIPHIER_SSCC + 0xc00;
+		break;
+	}
+
+	writel(active_ways, base + 4 * cpu);
+}
+
+static void uniphier_cache_endisable(int enable)
+{
+	u32 tmp;
+
+	tmp = readl(UNIPHIER_SSCC);
+	if (enable)
+		tmp |= UNIPHIER_SSCC_ON;
+	else
+		tmp &= ~UNIPHIER_SSCC_ON;
+	writel(tmp, UNIPHIER_SSCC);
+}
+
+void uniphier_cache_enable(void)
+{
+	uniphier_cache_endisable(1);
+}
+
+void uniphier_cache_disable(void)
+{
+	uniphier_cache_endisable(0);
+}
+
+#ifdef CONFIG_CACHE_UNIPHIER
+void v7_outer_cache_flush_all(void)
+{
+	uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+void v7_outer_cache_inval_all(void)
+{
+	uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV);
+}
+
+void v7_outer_cache_flush_range(u32 start, u32 end)
+{
+	uniphier_cache_maint_range(start, end, 0, UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+void v7_outer_cache_inval_range(u32 start, u32 end)
+{
+	if (start & (UNIPHIER_SSC_LINE_SIZE - 1)) {
+		start &= ~(UNIPHIER_SSC_LINE_SIZE - 1);
+		uniphier_cache_maint_range(start, UNIPHIER_SSC_LINE_SIZE, 0,
+					   UNIPHIER_SSCOQM_CM_FLUSH);
+		start += UNIPHIER_SSC_LINE_SIZE;
+	}
+
+	if (start >= end) {
+		uniphier_cache_sync();
+		return;
+	}
+
+	if (end & (UNIPHIER_SSC_LINE_SIZE - 1)) {
+		end &= ~(UNIPHIER_SSC_LINE_SIZE - 1);
+		uniphier_cache_maint_range(end, UNIPHIER_SSC_LINE_SIZE, 0,
+					   UNIPHIER_SSCOQM_CM_FLUSH);
+	}
+
+	if (start >= end) {
+		uniphier_cache_sync();
+		return;
+	}
+
+	uniphier_cache_maint_range(start, end, 0, UNIPHIER_SSCOQM_CM_INV);
+}
+
+void v7_outer_cache_enable(void)
+{
+	uniphier_cache_set_active_ways(0, U32_MAX);	/* activate all ways */
+	uniphier_cache_enable();
+}
+
+void v7_outer_cache_disable(void)
+{
+	uniphier_cache_disable();
+}
+#endif
+
+void enable_caches(void)
+{
+	dcache_enable();
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/cache-uniphier.h b/roms/u-boot/arch/arm/mach-uniphier/arm32/cache-uniphier.h
new file mode 100644
index 000000000..40838244d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/cache-uniphier.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef __CACHE_UNIPHIER_H
+#define __CACHE_UNIPHIER_H
+
+#include <linux/types.h>
+
+void uniphier_cache_prefetch_range(u32 start, u32 end, u32 ways);
+void uniphier_cache_touch_range(u32 start, u32 end, u32 ways);
+void uniphier_cache_touch_zero_range(u32 start, u32 end, u32 ways);
+void uniphier_cache_inv_way(u32 ways);
+void uniphier_cache_set_active_ways(int cpu, u32 active_ways);
+void uniphier_cache_enable(void);
+void uniphier_cache_disable(void);
+
+#endif /* __CACHE_UNIPHIER_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/debug_ll.S b/roms/u-boot/arch/arm/mach-uniphier/arm32/debug_ll.S
new file mode 100644
index 000000000..3fed7985f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/debug_ll.S
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * On-chip UART initializaion for low-level debugging
+ *
+ * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/linkage.h>
+
+#include "../bcu/bcu-regs.h"
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
+
+#define SG_REVISION_TYPE_SHIFT		16
+#define SG_REVISION_TYPE_MASK		(0xff << SG_REVISION_TYPE_SHIFT)
+#define BAUDRATE		115200
+#define DIV_ROUND(x, d)		(((x) + ((d) / 2)) / (d))
+
+.macro	sg_set_pinsel, pin, muxval, mux_bits, reg_stride, ra, rd
+	ldr	\ra, =(SG_BASE + SG_PINCTRL_BASE + \pin * \mux_bits / 32 * \reg_stride)
+	ldr	\rd, [\ra]
+	and	\rd, \rd, #~(((1 << \mux_bits) - 1) << (\pin * \mux_bits % 32))
+	orr	\rd, \rd, #(\muxval << (\pin * \mux_bits % 32))
+	str	\rd, [\ra]
+.endm
+
+ENTRY(debug_ll_init)
+	ldr		r0, =(SG_BASE + SG_REVISION)
+	ldr		r1, [r0]
+	and		r1, r1, #SG_REVISION_TYPE_MASK
+	mov		r1, r1, lsr #SG_REVISION_TYPE_SHIFT
+
+#if defined(CONFIG_ARCH_UNIPHIER_LD4)
+#define UNIPHIER_LD4_UART_CLK		36864000
+	cmp		r1, #0x26
+	bne		ld4_end
+
+	ldr		r0, =(SG_BASE + SG_IECTRL)
+	ldr		r1, [r0]
+	orr		r1, r1, #1
+	str		r1, [r0]
+
+	sg_set_pinsel	88, 1, 8, 4, r0, r1	@ HSDOUT6 -> TXD0
+
+	ldr		r3, =DIV_ROUND(UNIPHIER_LD4_UART_CLK, 16 * BAUDRATE)
+
+	b		init_uart
+ld4_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
+#define UNIPHIER_PRO4_UART_CLK		73728000
+	cmp		r1, #0x28
+	bne		pro4_end
+
+	sg_set_pinsel	128, 0, 4, 8, r0, r1	@ TXD0 -> TXD0
+
+	ldr		r0, =(SG_BASE + SG_LOADPINCTRL)
+	mov		r1, #1
+	str		r1, [r0]
+
+	ldr		r0, =(SC_BASE + SC_CLKCTRL)
+	ldr		r1, [r0]
+	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
+	str		r1, [r0]
+
+	ldr		r3, =DIV_ROUND(UNIPHIER_PRO4_UART_CLK, 16 * BAUDRATE)
+
+	b		init_uart
+pro4_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
+#define UNIPHIER_SLD8_UART_CLK		80000000
+	cmp		r1, #0x29
+	bne		sld8_end
+
+	ldr		r0, =(SG_BASE + SG_IECTRL)
+	ldr		r1, [r0]
+	orr		r1, r1, #1
+	str		r1, [r0]
+
+	sg_set_pinsel	70, 3, 8, 4, r0, r1	@ HSDOUT0 -> TXD0
+
+	ldr		r3, =DIV_ROUND(UNIPHIER_SLD8_UART_CLK, 16 * BAUDRATE)
+
+	b		init_uart
+sld8_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
+#define UNIPHIER_PRO5_UART_CLK		73728000
+	cmp		r1, #0x2A
+	bne		pro5_end
+
+	sg_set_pinsel	47, 0, 4, 8, r0, r1	@ TXD0 -> TXD0
+	sg_set_pinsel	49, 0, 4, 8, r0, r1	@ TXD1 -> TXD1
+	sg_set_pinsel	51, 0, 4, 8, r0, r1	@ TXD2 -> TXD2
+	sg_set_pinsel	53, 0, 4, 8, r0, r1	@ TXD3 -> TXD3
+
+	ldr		r0, =(SG_BASE + SG_LOADPINCTRL)
+	mov		r1, #1
+	str		r1, [r0]
+
+	ldr		r0, =(SC_BASE + SC_CLKCTRL)
+	ldr		r1, [r0]
+	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
+	str		r1, [r0]
+
+	ldr		r3, =DIV_ROUND(UNIPHIER_PRO5_UART_CLK, 16 * BAUDRATE)
+
+	b		init_uart
+pro5_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
+#define UNIPHIER_PXS2_UART_CLK		88900000
+	cmp		r1, #0x2E
+	bne		pxs2_end
+
+	ldr		r0, =(SG_BASE + SG_IECTRL)
+	ldr		r1, [r0]
+	orr		r1, r1, #1
+	str		r1, [r0]
+
+	sg_set_pinsel	217, 8, 8, 4, r0, r1	@ TXD0 -> TXD0
+	sg_set_pinsel	115, 8, 8, 4, r0, r1	@ TXD1 -> TXD1
+	sg_set_pinsel	113, 8, 8, 4, r0, r1	@ TXD2 -> TXD2
+	sg_set_pinsel	219, 8, 8, 4, r0, r1	@ TXD3 -> TXD3
+
+	ldr		r0, =(SC_BASE + SC_CLKCTRL)
+	ldr		r1, [r0]
+	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
+	str		r1, [r0]
+
+	ldr		r3, =DIV_ROUND(UNIPHIER_PXS2_UART_CLK, 16 * BAUDRATE)
+
+	b		init_uart
+pxs2_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
+#define UNIPHIER_LD6B_UART_CLK		88900000
+	cmp		r1, #0x2F
+	bne		ld6b_end
+
+	ldr		r0, =(SG_BASE + SG_IECTRL)
+	ldr		r1, [r0]
+	orr		r1, r1, #1
+	str		r1, [r0]
+
+	sg_set_pinsel	135, 3, 8, 4, r0, r1	@ PORT10 -> TXD0
+	sg_set_pinsel	115, 0, 8, 4, r0, r1	@ TXD1 -> TXD1
+	sg_set_pinsel	113, 2, 8, 4, r0, r1	@ SBO0 -> TXD2
+
+	ldr		r0, =(SC_BASE + SC_CLKCTRL)
+	ldr		r1, [r0]
+	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
+	str		r1, [r0]
+
+	ldr		r3, =DIV_ROUND(UNIPHIER_LD6B_UART_CLK, 16 * BAUDRATE)
+
+	b		init_uart
+ld6b_end:
+#endif
+	mov		pc, lr
+
+init_uart:
+	addruart	r0, r1, r2
+	mov		r1, #UART_LCR_WLEN8 << 8
+	str		r1, [r0, #0x10]
+	str		r3, [r0, #0x24]
+
+	mov		pc, lr
+ENDPROC(debug_ll_init)
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S b/roms/u-boot/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S
new file mode 100644
index 000000000..36db50fd9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	ldr	sp, = CONFIG_SYS_INIT_SP_ADDR
+	b	uniphier_cache_disable
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/lowlevel_init.S b/roms/u-boot/arch/arm/mach-uniphier/arm32/lowlevel_init.S
new file mode 100644
index 000000000..3f9f135bc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/lowlevel_init.S
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <linux/sizes.h>
+#include <asm/system.h>
+
+ENTRY(lowlevel_init)
+	mov	r8, lr			@ persevere link reg across call
+
+	/*
+	 * The UniPhier Boot ROM loads SPL code to the L2 cache.
+	 * But CPUs can only do instruction fetch now because start.S has
+	 * cleared C and M bits.
+	 * First we need to turn on MMU and Dcache again to get back
+	 * data access to L2.
+	 */
+	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
+	orr	r0, r0, #(CR_C | CR_M)	@ enable MMU and Dcache
+	mcr	p15, 0, r0, c1, c0, 0
+
+#ifdef CONFIG_DEBUG_LL
+	bl	debug_ll_init
+#endif
+
+	bl	setup_init_ram		@ RAM area for stack and page table
+
+	/*
+	 * Now we are using the page table embedded in the Boot ROM.
+	 * What we need to do next is to create a page table and switch
+	 * over to it.
+	 */
+	bl	create_page_table
+	bl	__v7_flush_dcache_all
+
+	/* Disable MMU and Dcache before switching Page Table */
+	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
+	bic	r0, r0, #(CR_C | CR_M)	@ disable MMU and Dcache
+	mcr	p15, 0, r0, c1, c0, 0
+
+	bl	enable_mmu
+
+	mov	lr, r8			@ restore link
+	mov	pc, lr			@ back to my caller
+ENDPROC(lowlevel_init)
+
+ENTRY(enable_mmu)
+	mrc	p15, 0, r0, c2, c0, 2	@ TTBCR (Translation Table Base Control Register)
+	bic	r0, r0, #0x37
+	orr	r0, r0, #0x20		@ disable TTBR1
+	mcr	p15, 0, r0, c2, c0, 2
+
+	orr	r0, r12, #0x8		@ Outer Cacheability for table walks: WBWA
+	mcr	p15, 0, r0, c2, c0, 0   @ TTBR0
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c8, c7, 0	@ invalidate TLBs
+
+	mov	r0, #-1			@ manager for all domains (No permission check)
+	mcr	p15, 0, r0, c3, c0, 0   @ DACR (Domain Access Control Register)
+
+	dsb
+	isb
+	/*
+	 * MMU on:
+	 * TLBs was already invalidated in "../start.S"
+	 * So, we don't need to invalidate it here.
+	 */
+	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
+	orr	r0, r0, #(CR_C | CR_M)	@ MMU and Dcache enable
+	mcr	p15, 0, r0, c1, c0, 0
+
+	mov	pc, lr
+ENDPROC(enable_mmu)
+
+/*
+ * For PH1-Pro4 or older SoCs, the size of WAY is 32KB.
+ * It is large enough for tmp RAM.
+ */
+#define BOOT_RAM_SIZE	(SZ_32K)
+#define BOOT_RAM_BASE	((CONFIG_SPL_STACK) - (BOOT_RAM_SIZE))
+#define BOOT_RAM_WAYS	(0x00000100)	@ way 8
+
+#define SSCO_BASE		0x506c0000
+#define SSCOPE			0x244
+#define SSCOQM			0x248
+#define SSCOQAD			0x24c
+#define SSCOQSZ			0x250
+#define SSCOQWN			0x258
+#define SSCOPPQSEF		0x25c
+#define SSCOLPQS		0x260
+
+ENTRY(setup_init_ram)
+	ldr	r1, = SSCO_BASE
+
+	/* Touch to zero for the boot way */
+0:	ldr	r0, = 0x00408006	@ touch to zero with address range
+	str	r0, [r1, #SSCOQM]
+	ldr	r0, = BOOT_RAM_BASE
+	str	r0, [r1, #SSCOQAD]
+	ldr	r0, = BOOT_RAM_SIZE
+	str	r0, [r1, #SSCOQSZ]
+	ldr	r0, = BOOT_RAM_WAYS
+	str	r0, [r1, #SSCOQWN]
+	ldr	r0, [r1, #SSCOPPQSEF]
+	cmp	r0, #0			@ check if the command is successfully set
+	bne	0b			@ try again if an error occurs
+
+1:	ldr	r0, [r1, #SSCOLPQS]
+	cmp	r0, #0x4
+	bne	1b			@ wait until the operation is completed
+	str	r0, [r1, #SSCOLPQS]	@ clear the complete notification flag
+
+	mov	pc, lr
+ENDPROC(setup_init_ram)
+
+#define DEVICE	0x00002002 /* Non-shareable Device */
+#define NORMAL	0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
+
+ENTRY(create_page_table)
+	ldr	r0, = DEVICE
+	ldr	r1, = BOOT_RAM_BASE
+	mov	r12, r1			@ r12 is preserved during D-cache flush
+0:	str	r0, [r1], #4		@ specify all the sections as Device
+	adds	r0, r0, #0x00100000
+	bcc	0b
+
+	ldr	r0, = NORMAL
+	str	r0, [r12]		@ mark the first section as Normal
+	add	r0, r0, #0x00100000
+	str	r0, [r12, #4]		@ mark the second section as Normal
+	mov	pc, lr
+ENDPROC(create_page_table)
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/psci.c b/roms/u-boot/arch/arm/mach-uniphier/arm32/psci.c
new file mode 100644
index 000000000..fbb6ebca7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/psci.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <cpu_func.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/psci.h>
+#include <linux/sizes.h>
+#include <asm/processor.h>
+#include <asm/psci.h>
+#include <asm/secure.h>
+#include <asm/system.h>
+
+#include "../debug.h"
+#include "../soc-info.h"
+#include "arm-mpcore.h"
+#include "cache-uniphier.h"
+
+#define UNIPHIER_SMPCTRL_ROM_RSV2	0x59801208
+
+void uniphier_smp_trampoline(void);
+void uniphier_smp_trampoline_end(void);
+u32 uniphier_smp_booted[CONFIG_ARMV7_PSCI_NR_CPUS];
+
+static int uniphier_get_nr_cpus(void)
+{
+	switch (uniphier_get_soc_id()) {
+	case UNIPHIER_PRO4_ID:
+	case UNIPHIER_PRO5_ID:
+		return 2;
+	case UNIPHIER_PXS2_ID:
+	case UNIPHIER_LD6B_ID:
+		return 4;
+	default:
+		return 1;
+	}
+}
+
+static void uniphier_smp_kick_all_cpus(void)
+{
+	const u32 target_ways = BIT(0);
+	size_t trmp_size;
+	u32 trmp_src = (unsigned long)uniphier_smp_trampoline;
+	u32 trmp_src_end = (unsigned long)uniphier_smp_trampoline_end;
+	u32 trmp_dest, trmp_dest_end;
+	int nr_cpus, i;
+	int timeout = 1000;
+
+	nr_cpus = uniphier_get_nr_cpus();
+	if (nr_cpus == 1)
+		return;
+
+	for (i = 0; i < nr_cpus; i++)	/* lock ways for all CPUs */
+		uniphier_cache_set_active_ways(i, 0);
+	uniphier_cache_inv_way(target_ways);
+	uniphier_cache_enable();
+
+	/* copy trampoline code */
+	uniphier_cache_prefetch_range(trmp_src, trmp_src_end, target_ways);
+
+	trmp_size = trmp_src_end - trmp_src;
+
+	trmp_dest = trmp_src & (SZ_64K - 1);
+	trmp_dest += SZ_1M - SZ_64K * 2;
+
+	trmp_dest_end = trmp_dest + trmp_size;
+
+	uniphier_cache_touch_range(trmp_dest, trmp_dest_end, target_ways);
+
+	writel(trmp_dest, UNIPHIER_SMPCTRL_ROM_RSV2);
+
+	asm("dsb	ishst\n" /* Ensure the write to ROM_RSV2 is visible */
+	    "sev"); /* Bring up all secondary CPUs from Boot ROM into U-Boot */
+
+	while (--timeout) {
+		int all_booted = 1;
+
+		for (i = 1; i < nr_cpus; i++)
+			if (!uniphier_smp_booted[i])
+				all_booted = 0;
+		if (all_booted)
+			break;
+		udelay(1);
+
+		/* barrier here because uniphier_smp_booted[] may be updated */
+		cpu_relax();
+	}
+
+	if (!timeout)
+		pr_warn("warning: some of secondary CPUs may not boot\n");
+
+	uniphier_cache_disable();
+}
+
+void psci_board_init(void)
+{
+	unsigned long scu_base;
+	u32 scu_ctrl, tmp;
+
+	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (scu_base));
+
+	scu_ctrl = readl(scu_base + 0x30);
+	if (!(scu_ctrl & 1))
+		writel(scu_ctrl | 0x1, scu_base + 0x30);
+
+	scu_ctrl = readl(scu_base + SCU_CTRL);
+	scu_ctrl |= SCU_ENABLE | SCU_STANDBY_ENABLE;
+	writel(scu_ctrl, scu_base + SCU_CTRL);
+
+	tmp = readl(scu_base + SCU_SNSAC);
+	tmp |= 0xfff;
+	writel(tmp, scu_base + SCU_SNSAC);
+
+	uniphier_smp_kick_all_cpus();
+}
+
+void psci_arch_init(void)
+{
+	u32 actlr;
+
+	asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (actlr));
+	actlr |= 0x41;		/* set SMP and FW bits */
+	asm("mcr p15, 0, %0, c1, c0, 1" : : "r" (actlr));
+}
+
+u32 uniphier_psci_holding_pen_release __secure_data = 0xffffffff;
+
+s32 __secure psci_cpu_on(u32 function_id, u32 cpuid, u32 entry_point,
+			 u32 context_id)
+{
+	u32 cpu = cpuid & 0xff;
+
+	debug_puts("[U-Boot PSCI]  psci_cpu_on: cpuid=");
+	debug_puth(cpuid);
+	debug_puts(", entry_point=");
+	debug_puth(entry_point);
+	debug_puts(", context_id=");
+	debug_puth(context_id);
+	debug_puts("\n");
+
+	psci_save(cpu, entry_point, context_id);
+
+	/* We assume D-cache is off, so do not call flush_dcache() here */
+	uniphier_psci_holding_pen_release = cpu;
+
+	/* Send an event to wake up the secondary CPU. */
+	asm("dsb	ishst\n"
+	    "sev");
+
+	return PSCI_RET_SUCCESS;
+}
+
+void __secure psci_system_reset(void)
+{
+	reset_cpu();
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/psci_smp.S b/roms/u-boot/arch/arm/mach-uniphier/arm32/psci_smp.S
new file mode 100644
index 000000000..65a06ae23
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/psci_smp.S
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/system.h>
+
+	.section ._secure.text, "ax"
+
+ENTRY(uniphier_smp_trampoline)
+	ldr	r0, 0f
+	mrc	p15, 0, r1, c1, c0, 0	@ SCTLR (System Control Register)
+	orr	r1, r1, #CR_I		@ Enable ICache
+	bic	r1, r1, #(CR_C | CR_M)	@ Disable MMU and Dcache
+	mcr	p15, 0, r1, c1, c0, 0
+
+	bx	r0
+0:	.word	uniphier_secondary_startup
+	.globl	uniphier_smp_trampoline_end
+uniphier_smp_trampoline_end:
+ENDPROC(uniphier_smp_trampoline)
+
+LENTRY(uniphier_secondary_startup)
+	mrc	p15, 0, r1, c0, c0, 5	@ MPIDR (Multiprocessor Affinity Reg)
+	and	r1, r1, #0xff
+
+	ldr	r2, =uniphier_smp_booted
+	mov	r0, #1
+	str	r0, [r2, r1, lsl #2]
+
+	ldr	r2, =uniphier_psci_holding_pen_release
+pen:	ldr	r0, [r2]
+	cmp	r0, r1
+	beq	psci_cpu_entry
+	wfe
+	b	pen
+ENDPROC(uniphier_secondary_startup)
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm32/timer.c b/roms/u-boot/arch/arm/mach-uniphier/arm32/timer.c
new file mode 100644
index 000000000..a40bdf170
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm32/timer.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <init.h>
+#include <linux/io.h>
+
+#include "arm-mpcore.h"
+
+#define PERIPHCLK (50 * 1000 * 1000) /* 50 MHz */
+#define PRESCALER ((PERIPHCLK) / (CONFIG_SYS_TIMER_RATE) - 1)
+
+static void *get_global_timer_base(void)
+{
+	void *val;
+
+	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (val) : : "memory");
+
+	return val + GLOBAL_TIMER_OFFSET;
+}
+
+unsigned long timer_read_counter(void)
+{
+	/*
+	 * ARM 64bit Global Timer is too much for our purpose.
+	 * We use only lower 32 bit of the timer counter.
+	 */
+	return readl(get_global_timer_base() + GTIMER_CNT_L);
+}
+
+int timer_init(void)
+{
+	/* enable timer */
+	writel(PRESCALER << 8 | 1, get_global_timer_base() + GTIMER_CTRL);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm64/Makefile b/roms/u-boot/arch/arm/mach-uniphier/arm64/Makefile
new file mode 100644
index 000000000..750c4f756
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm64/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += mem_map.o
diff --git a/roms/u-boot/arch/arm/mach-uniphier/arm64/mem_map.c b/roms/u-boot/arch/arm/mach-uniphier/arm64/mem_map.c
new file mode 100644
index 000000000..a8bd4eee8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/arm64/mem_map.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/types.h>
+#include <asm/armv8/mmu.h>
+
+#include "../init.h"
+
+static struct mm_region uniphier_mem_map[] = {
+	{
+		.virt = 0x00000000,
+		.phys = 0x00000000,
+		.size = 0x80000000,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	},
+	{
+		.virt = 0x80000000,
+		.phys = 0x80000000,
+		.size = 0xc0000000,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	},
+	{ /* sentinel */ }
+};
+
+struct mm_region *mem_map = uniphier_mem_map;
+
+void uniphier_mem_map_init(unsigned long dram_base, unsigned long dram_size)
+{
+	uniphier_mem_map[0].size = dram_base;
+	uniphier_mem_map[1].virt = dram_base;
+	uniphier_mem_map[1].phys = dram_base;
+	uniphier_mem_map[1].size = dram_size;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/base-address.c b/roms/u-boot/arch/arm/mach-uniphier/base-address.c
new file mode 100644
index 000000000..d7456f8df
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/base-address.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (C) 2019 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dm/of.h>
+#include <fdt_support.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+#include <asm/global_data.h>
+
+#include "base-address.h"
+#include "sc64-regs.h"
+#include "sg-regs.h"
+
+/*
+ * Dummy initializers are needed to allocate these to .data section instead of
+ * .bss section. The .bss section is unusable before relocation because the
+ * .bss section and DT share the same address. Without the initializers,
+ * DT would be broken.
+ */
+void __iomem *sc_base = (void *)0xdeadbeef;
+void __iomem *sg_base = (void *)0xdeadbeef;
+
+static u64 uniphier_base_address_get(const char *compat_tail)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	const void *fdt = gd->fdt_blob;
+	int offset, len, i;
+	const char *str;
+
+	for (offset = fdt_next_node(fdt, 0, NULL);
+	     offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		for (i = 0;
+		     (str = fdt_stringlist_get(fdt, offset, "compatible", i, &len));
+		     i++) {
+			if (!memcmp(compat_tail,
+				    str + len - strlen(compat_tail),
+				    strlen(compat_tail)))
+				return fdt_get_base_address(fdt, offset);
+		}
+	}
+
+	return OF_BAD_ADDR;
+}
+
+int uniphier_base_address_init(void)
+{
+	u64 base;
+
+	base = uniphier_base_address_get("-soc-glue");
+	if (base == OF_BAD_ADDR)
+		return -EINVAL;
+
+	sg_base = ioremap(base, SZ_8K);
+
+	base = uniphier_base_address_get("-sysctrl");
+	if (base == OF_BAD_ADDR)
+		return -EINVAL;
+
+	sc_base = ioremap(base, SZ_64K);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/base-address.h b/roms/u-boot/arch/arm/mach-uniphier/base-address.h
new file mode 100644
index 000000000..6158ce7d6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/base-address.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2019 Socionext Inc.
+ */
+
+#ifndef __UNIPHIER_BASE_ADDRESS_H
+#define __UNIPHIER_BASE_ADDRESS_H
+
+#ifdef CONFIG_ARCH_UNIPHIER_V8_MULTI
+int uniphier_base_address_init(void);
+#else
+static inline int uniphier_base_address_init(void)
+{
+	return 0;
+}
+#endif
+
+#endif /* __UNIPHIER_BASE_ADDRESS_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/bcu/Makefile b/roms/u-boot/arch/arm/mach-uniphier/bcu/Makefile
new file mode 100644
index 000000000..88730205a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/bcu/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= bcu-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= bcu-ld4.o
diff --git a/roms/u-boot/arch/arm/mach-uniphier/bcu/bcu-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/bcu/bcu-ld4.c
new file mode 100644
index 000000000..ea6088ba1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/bcu/bcu-ld4.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/io.h>
+
+#include "../init.h"
+#include "bcu-regs.h"
+
+#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x))
+
+void uniphier_ld4_bcu_init(const struct uniphier_board_data *bd)
+{
+	int shift;
+
+	writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */
+	writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */
+	writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */
+	writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */
+	writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */
+
+	/* Specify DDR channel */
+	shift = bd->dram_ch[0].size / 0x04000000 * 4;
+	writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */
+
+	shift -= 32;
+	writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */
+
+	shift -= 32;
+	writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/bcu/bcu-regs.h b/roms/u-boot/arch/arm/mach-uniphier/bcu/bcu-regs.h
new file mode 100644
index 000000000..9f6cf540b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/bcu/bcu-regs.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UniPhier BCU (Bus Control Unit) registers
+ *
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ */
+
+#ifndef ARCH_BCU_REGS_H
+#define ARCH_BCU_REGS_H
+
+#define	BCU_BASE		0x50080000
+
+#define	BCSCR(x)                (BCU_BASE + 0x180 + (x) * 4)
+#define	BCSCR0			(BCSCR(0))
+#define	BCSCR1			(BCSCR(1))
+#define	BCSCR2			(BCSCR(2))
+#define	BCSCR3			(BCSCR(3))
+#define	BCSCR4			(BCSCR(4))
+#define	BCSCR5			(BCSCR(5))
+
+#define	BCIPPCCHR(x)		(BCU_BASE + 0x0280 + (x) * 4)
+#define	BCIPPCCHR0		(BCIPPCCHR(0))
+#define	BCIPPCCHR1		(BCIPPCCHR(1))
+#define	BCIPPCCHR2		(BCIPPCCHR(2))
+#define	BCIPPCCHR3		(BCIPPCCHR(3))
+#define	BCIPPCCHR4		(BCIPPCCHR(4))
+#define	BCIPPCCHR5		(BCIPPCCHR(5))
+
+#endif  /* ARCH_BCU_REGS_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/board_init.c b/roms/u-boot/arch/arm/mach-uniphier/board_init.c
new file mode 100644
index 000000000..30e4e23a6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/board_init.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/printk.h>
+
+#include "init.h"
+#include "micro-support-card.h"
+#include "soc-info.h"
+
+#define PC0CTRL				0x598000c0
+
+#if defined(CONFIG_ARCH_UNIPHIER_LD4) || defined(CONFIG_ARCH_UNIPHIER_SLD8)
+static void uniphier_ld4_sbc_init(void)
+{
+	u32 tmp;
+
+	/* system bus output enable */
+	tmp = readl(PC0CTRL);
+	tmp &= 0xfffffcff;
+	writel(tmp, PC0CTRL);
+}
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2) || \
+    defined(CONFIG_ARCH_UNIPHIER_LD6B) || \
+    defined(CONFIG_ARCH_UNIPHIER_LD11) || \
+    defined(CONFIG_ARCH_UNIPHIER_LD20) || \
+    defined(CONFIG_ARCH_UNIPHIER_PXS3)
+static void uniphier_pxs2_sbc_init(void)
+{
+	/* necessary for ROM boot ?? */
+	/* system bus output enable */
+	writel(0x17, PC0CTRL);
+}
+#endif
+
+#ifdef CONFIG_ARCH_UNIPHIER_LD20
+static void uniphier_ld20_misc_init(void)
+{
+	/* ES1 errata: increase VDD09 supply to suppress VBO noise */
+	if (uniphier_get_soc_revision() == 1) {
+		writel(0x00000003, 0x6184e004);
+		writel(0x00000100, 0x6184e040);
+		writel(0x0000b500, 0x6184e024);
+		writel(0x00000001, 0x6184e000);
+	}
+}
+#endif
+
+struct uniphier_initdata {
+	unsigned int soc_id;
+	void (*sbc_init)(void);
+	void (*pll_init)(void);
+	void (*clk_init)(void);
+	void (*misc_init)(void);
+};
+
+static const struct uniphier_initdata uniphier_initdata[] = {
+#if defined(CONFIG_ARCH_UNIPHIER_LD4)
+	{
+		.soc_id = UNIPHIER_LD4_ID,
+		.sbc_init = uniphier_ld4_sbc_init,
+		.pll_init = uniphier_ld4_pll_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
+	{
+		.soc_id = UNIPHIER_PRO4_ID,
+		.pll_init = uniphier_pro4_pll_init,
+		.clk_init = uniphier_pro4_clk_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
+	{
+		.soc_id = UNIPHIER_SLD8_ID,
+		.sbc_init = uniphier_ld4_sbc_init,
+		.pll_init = uniphier_ld4_pll_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
+	{
+		.soc_id = UNIPHIER_PRO5_ID,
+		.clk_init = uniphier_pro5_clk_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
+	{
+		.soc_id = UNIPHIER_PXS2_ID,
+		.sbc_init = uniphier_pxs2_sbc_init,
+		.clk_init = uniphier_pxs2_clk_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
+	{
+		.soc_id = UNIPHIER_LD6B_ID,
+		.sbc_init = uniphier_pxs2_sbc_init,
+		.clk_init = uniphier_pxs2_clk_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD11)
+	{
+		.soc_id = UNIPHIER_LD11_ID,
+		.sbc_init = uniphier_pxs2_sbc_init,
+		.pll_init = uniphier_ld11_pll_init,
+		.clk_init = uniphier_ld11_clk_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD20)
+	{
+		.soc_id = UNIPHIER_LD20_ID,
+		.sbc_init = uniphier_pxs2_sbc_init,
+		.pll_init = uniphier_ld20_pll_init,
+		.clk_init = uniphier_ld20_clk_init,
+		.misc_init = uniphier_ld20_misc_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS3)
+	{
+		.soc_id = UNIPHIER_PXS3_ID,
+		.sbc_init = uniphier_pxs2_sbc_init,
+		.pll_init = uniphier_pxs3_pll_init,
+		.clk_init = uniphier_pxs3_clk_init,
+	},
+#endif
+};
+UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_initdata, uniphier_initdata)
+
+int board_init(void)
+{
+	const struct uniphier_initdata *initdata;
+
+	led_puts("U0");
+
+	initdata = uniphier_get_initdata();
+	if (!initdata) {
+		pr_err("unsupported SoC\n");
+		return -EINVAL;
+	}
+
+	if (initdata->sbc_init)
+		initdata->sbc_init();
+
+	support_card_init();
+
+	led_puts("U0");
+
+	if (initdata->pll_init)
+		initdata->pll_init();
+
+	led_puts("U1");
+
+	if (initdata->clk_init)
+		initdata->clk_init();
+
+	led_puts("U2");
+
+	if (initdata->misc_init)
+		initdata->misc_init();
+
+	led_puts("Uboo");
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/board_late_init.c b/roms/u-boot/arch/arm/mach-uniphier/board_late_init.c
new file mode 100644
index 000000000..b33c4b193
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/board_late_init.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014      Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <env.h>
+#include <init.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include <linux/libfdt.h>
+#include <stdio.h>
+#include <linux/printk.h>
+
+#include "init.h"
+
+static void uniphier_set_env_fdt_file(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	const char *compat;
+	char dtb_name[256];
+	int buf_len = sizeof(dtb_name);
+	int ret;
+
+	if (env_get("fdtfile"))
+		return;		/* do nothing if it is already set */
+
+	compat = fdt_stringlist_get(gd->fdt_blob, 0, "compatible", 0, NULL);
+	if (!compat)
+		goto fail;
+
+	/* rip off the vendor prefix "socionext,"  */
+	compat = strchr(compat, ',');
+	if (!compat)
+		goto fail;
+	compat++;
+
+	strncpy(dtb_name, compat, buf_len);
+	buf_len -= strlen(compat);
+
+	strncat(dtb_name, ".dtb", buf_len);
+
+	ret = env_set("fdtfile", dtb_name);
+	if (ret)
+		goto fail;
+
+	return;
+fail:
+	pr_warn("\"fdt_file\" environment variable was not set correctly\n");
+}
+
+static void uniphier_set_env_addr(const char *env, const char *offset_env)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned long offset = 0;
+	const char *str;
+	char *end;
+	int ret;
+
+	if (env_get(env))
+		return;		/* do nothing if it is already set */
+
+	if (offset_env) {
+		str = env_get(offset_env);
+		if (!str)
+			goto fail;
+
+		offset = simple_strtoul(str, &end, 16);
+		if (*end)
+			goto fail;
+	}
+
+	ret = env_set_hex(env, gd->ram_base + offset);
+	if (ret)
+		goto fail;
+
+	return;
+
+fail:
+	pr_warn("\"%s\" environment variable was not set correctly\n", env);
+}
+
+int board_late_init(void)
+{
+	puts("MODE:  ");
+
+	switch (uniphier_boot_device_raw()) {
+	case BOOT_DEVICE_MMC1:
+		printf("eMMC Boot");
+		env_set("bootdev", "emmc");
+		break;
+	case BOOT_DEVICE_MMC2:
+		printf("SD Boot");
+		env_set("bootdev", "sd");
+		break;
+	case BOOT_DEVICE_NAND:
+		printf("NAND Boot");
+		env_set("bootdev", "nand");
+		break;
+	case BOOT_DEVICE_NOR:
+		printf("NOR Boot");
+		env_set("bootdev", "nor");
+		break;
+	case BOOT_DEVICE_USB:
+		printf("USB Boot");
+		env_set("bootdev", "usb");
+		break;
+	default:
+		printf("Unknown");
+		break;
+	}
+
+	if (uniphier_have_internal_stm())
+		printf(" (STM: %s)",
+		       uniphier_boot_from_backend() ? "OFF" : "ON");
+
+	printf("\n");
+
+	uniphier_set_env_fdt_file();
+
+	uniphier_set_env_addr("dram_base", NULL);
+
+	uniphier_set_env_addr("loadaddr", "loadaddr_offset");
+
+	uniphier_set_env_addr("kernel_addr_r", "kernel_addr_r_offset");
+	uniphier_set_env_addr("ramdisk_addr_r", "ramdisk_addr_r_offset");
+	uniphier_set_env_addr("fdt_addr_r", "fdt_addr_r_offset");
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boards.c b/roms/u-boot/arch/arm/mach-uniphier/boards.c
new file mode 100644
index 000000000..3e2ec9b26
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boards.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/libfdt.h>
+#include <linux/kernel.h>
+#include <asm/global_data.h>
+
+#include "init.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_ARCH_UNIPHIER_LD4)
+static const struct uniphier_board_data uniphier_ld4_data = {
+	.dram_freq = 1600,
+	.dram_ch[0] = {
+		.size = 0x10000000,
+		.width = 16,
+	},
+	.dram_ch[1] = {
+		.size = 0x10000000,
+		.width = 16,
+	},
+	.flags = UNIPHIER_BD_DDR3PLUS,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
+/* 1GB RAM board */
+static const struct uniphier_board_data uniphier_pro4_data = {
+	.dram_freq = 1600,
+	.dram_ch[0] = {
+		.size = 0x20000000,
+		.width = 32,
+	},
+	.dram_ch[1] = {
+		.size = 0x20000000,
+		.width = 32,
+	},
+};
+
+/* 2GB RAM board */
+static const struct uniphier_board_data uniphier_pro4_2g_data = {
+	.dram_freq = 1600,
+	.dram_ch[0] = {
+		.size = 0x40000000,
+		.width = 32,
+	},
+	.dram_ch[1] = {
+		.size = 0x40000000,
+		.width = 32,
+	},
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
+static const struct uniphier_board_data uniphier_sld8_data = {
+	.dram_freq = 1333,
+	.dram_ch[0] = {
+		.size = 0x10000000,
+		.width = 16,
+	},
+	.dram_ch[1] = {
+		.size = 0x10000000,
+		.width = 16,
+	},
+	.flags = UNIPHIER_BD_DDR3PLUS,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
+static const struct uniphier_board_data uniphier_pro5_data = {
+	.dram_freq = 1866,
+	.dram_ch[0] = {
+		.size = 0x20000000,
+		.width = 32,
+	},
+	.dram_ch[1] = {
+		.size = 0x20000000,
+		.width = 32,
+	},
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
+static const struct uniphier_board_data uniphier_pxs2_data = {
+	.dram_freq = 2133,
+	.dram_ch[0] = {
+		.size = 0x40000000,
+		.width = 32,
+	},
+	.dram_ch[1] = {
+		.size = 0x20000000,
+		.width = 32,
+	},
+	.dram_ch[2] = {
+		.size = 0x20000000,
+		.width = 16,
+	},
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
+static const struct uniphier_board_data uniphier_ld6b_data = {
+	.dram_freq = 1866,
+	.dram_ch[0] = {
+		.size = 0x40000000,
+		.width = 32,
+	},
+	.dram_ch[1] = {
+		.size = 0x20000000,
+		.width = 32,
+	},
+	.dram_ch[2] = {
+		.size = 0x20000000,
+		.width = 16,
+	},
+};
+#endif
+
+struct uniphier_board_id {
+	const char *compatible;
+	const struct uniphier_board_data *param;
+};
+
+static const struct uniphier_board_id uniphier_boards[] = {
+#if defined(CONFIG_ARCH_UNIPHIER_LD4)
+	{ "socionext,uniphier-ld4", &uniphier_ld4_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
+	{ "socionext,uniphier-pro4-ace", &uniphier_pro4_2g_data, },
+	{ "socionext,uniphier-pro4-sanji", &uniphier_pro4_2g_data, },
+	{ "socionext,uniphier-pro4", &uniphier_pro4_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
+	{ "socionext,uniphier-sld8", &uniphier_sld8_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
+	{ "socionext,uniphier-pro5", &uniphier_pro5_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
+	{ "socionext,uniphier-pxs2", &uniphier_pxs2_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
+	{ "socionext,uniphier-ld6b", &uniphier_ld6b_data, },
+#endif
+};
+
+const struct uniphier_board_data *uniphier_get_board_param(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(uniphier_boards); i++) {
+		if (!fdt_node_check_compatible(gd->fdt_blob, 0,
+					       uniphier_boards[i].compatible))
+			return uniphier_boards[i].param;
+	}
+
+	return NULL;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boot-device/Makefile b/roms/u-boot/arch/arm/mach-uniphier/boot-device/Makefile
new file mode 100644
index 000000000..97d54443c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boot-device/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y					+= boot-device.o
+
+obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= boot-device-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= boot-device-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= boot-device-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO5)	+= boot-device-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= boot-device-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= boot-device-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= boot-device-ld11.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= boot-device-ld11.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= boot-device-pxs3.o
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-ld11.c b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-ld11.c
new file mode 100644
index 000000000..4689ed79f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-ld11.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <spl.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "boot-device.h"
+
+const struct uniphier_boot_device uniphier_ld11_boot_device_table[] = {
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, ONFI             Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI             Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, ONFI             Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI             Addr 5)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         4bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         4bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         8bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         8bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_MMC1, "eMMC (High Speed SDR, 8bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (High Speed SDR, 8bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         4bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_NOR,  "NOR  (XECS1)"},
+};
+
+const unsigned uniphier_ld11_boot_device_count =
+				ARRAY_SIZE(uniphier_ld11_boot_device_table);
+
+int uniphier_ld11_boot_device_is_usb(u32 pinmon)
+{
+	return !!(~pinmon & 0x00000080);
+}
+
+int uniphier_ld20_boot_device_is_usb(u32 pinmon)
+{
+	return !!(~pinmon & 0x00000780);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-ld4.c
new file mode 100644
index 000000000..c6aef18c1
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-ld4.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014      Panasonic Corporation
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <spl.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "boot-device.h"
+
+const struct uniphier_boot_device uniphier_ld4_boot_device_table[] = {
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize   1MB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize   1MB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_MMC1, "eMMC (3.3V)"},
+	{BOOT_DEVICE_MMC1, "eMMC (1.8V)"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NOR,  "NOR  (XECS0)"},
+};
+
+const unsigned uniphier_ld4_boot_device_count =
+				ARRAY_SIZE(uniphier_ld4_boot_device_table);
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pro5.c b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pro5.c
new file mode 100644
index 000000000..efd07a329
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pro5.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <spl.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "boot-device.h"
+
+const struct uniphier_boot_device uniphier_pro5_boot_device_table[] = {
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128MB, Addr 4)"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 512MB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_MMC1, "eMMC (1.8V)"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128MB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
+};
+
+const unsigned uniphier_pro5_boot_device_count =
+				ARRAY_SIZE(uniphier_pro5_boot_device_table);
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pxs2.c b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pxs2.c
new file mode 100644
index 000000000..677470cdc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pxs2.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <spl.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "boot-device.h"
+
+const struct uniphier_boot_device uniphier_pxs2_boot_device_table[] = {
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_MMC1, "eMMC (1.8V)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI,            Addr 4)"},
+	{BOOT_DEVICE_SPI,  "SPI  (3Byte CS0)"},
+	{BOOT_DEVICE_SPI,  "SPI  (4Byte CS0)"},
+	{BOOT_DEVICE_SPI,  "SPI  (3Byte CS1)"},
+	{BOOT_DEVICE_SPI,  "SPI  (4Byte CS1)"},
+	{BOOT_DEVICE_SPI,  "SPI  (4Byte CS0)"},
+	{BOOT_DEVICE_SPI,  "SPI  (3Byte CS0)"},
+	{BOOT_DEVICE_NONE, "Reserved"},
+};
+
+const unsigned uniphier_pxs2_boot_device_count =
+				ARRAY_SIZE(uniphier_pxs2_boot_device_table);
+
+int uniphier_pxs2_boot_device_is_usb(u32 pinmon)
+{
+	return !!(pinmon & 0x00000040);
+}
+
+unsigned int uniphier_pxs2_boot_device_fixup(unsigned int mode)
+{
+	if (mode == BOOT_DEVICE_USB)
+		return BOOT_DEVICE_NOR;
+
+	return mode;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pxs3.c b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pxs3.c
new file mode 100644
index 000000000..688809931
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device-pxs3.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <spl.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "../sg-regs.h"
+#include "boot-device.h"
+
+const struct uniphier_boot_device uniphier_pxs3_boot_device_table[] = {
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         4bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         4bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         8bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         8bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_MMC1, "eMMC (High Speed SDR, 8bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (High Speed SDR, 8bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5, BBM Last Page)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5, BBM Last Page)"},
+};
+
+const unsigned uniphier_pxs3_boot_device_count =
+				ARRAY_SIZE(uniphier_pxs3_boot_device_table);
+
+int uniphier_pxs3_boot_device_is_usb(u32 pinmon)
+{
+	return !!(readl(sg_base + SG_PINMON2) & BIT(31));
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device.c b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device.c
new file mode 100644
index 000000000..98ff34cfa
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <command.h>
+#include <spl.h>
+#include <stdio.h>
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+
+#include "../init.h"
+#include "../sg-regs.h"
+#include "../soc-info.h"
+#include "boot-device.h"
+
+#define SBBASE0			0x58c00100
+#define SBBASE_BANK_ENABLE		BIT(0)
+
+static int uniphier_sbc_boot_is_swapped(void)
+{
+	return !(readl(SBBASE0) & SBBASE_BANK_ENABLE);
+}
+
+struct uniphier_boot_device_info {
+	unsigned int soc_id;
+	unsigned int boot_device_sel_shift;
+	const struct uniphier_boot_device *boot_device_table;
+	const unsigned int *boot_device_count;
+	int (*boot_device_is_sd)(u32 pinmon);
+	int (*boot_device_is_usb)(u32 pinmon);
+	unsigned int (*boot_device_fixup)(unsigned int mode);
+	int (*boot_is_swapped)(void);
+	bool have_internal_stm;
+};
+
+static const struct uniphier_boot_device_info uniphier_boot_device_info[] = {
+#if defined(CONFIG_ARCH_UNIPHIER_LD4)
+	{
+		.soc_id = UNIPHIER_LD4_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_ld4_boot_device_table,
+		.boot_device_count = &uniphier_ld4_boot_device_count,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = true,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
+	{
+		.soc_id = UNIPHIER_PRO4_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_ld4_boot_device_table,
+		.boot_device_count = &uniphier_ld4_boot_device_count,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = false,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
+	{
+		.soc_id = UNIPHIER_SLD8_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_ld4_boot_device_table,
+		.boot_device_count = &uniphier_ld4_boot_device_count,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = true,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
+	{
+		.soc_id = UNIPHIER_PRO5_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_pro5_boot_device_table,
+		.boot_device_count = &uniphier_pro5_boot_device_count,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = false,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
+	{
+		.soc_id = UNIPHIER_PXS2_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_pxs2_boot_device_table,
+		.boot_device_count = &uniphier_pxs2_boot_device_count,
+		.boot_device_is_usb = uniphier_pxs2_boot_device_is_usb,
+		.boot_device_fixup = uniphier_pxs2_boot_device_fixup,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = false,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
+	{
+		.soc_id = UNIPHIER_LD6B_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_pxs2_boot_device_table,
+		.boot_device_count = &uniphier_pxs2_boot_device_count,
+		.boot_device_is_usb = uniphier_pxs2_boot_device_is_usb,
+		.boot_device_fixup = uniphier_pxs2_boot_device_fixup,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = true,	/* STM on A-chip */
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD11)
+	{
+		.soc_id = UNIPHIER_LD11_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_ld11_boot_device_table,
+		.boot_device_count = &uniphier_ld11_boot_device_count,
+		.boot_device_is_usb = uniphier_ld11_boot_device_is_usb,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = true,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD20)
+	{
+		.soc_id = UNIPHIER_LD20_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_ld11_boot_device_table,
+		.boot_device_count = &uniphier_ld11_boot_device_count,
+		.boot_device_is_usb = uniphier_ld20_boot_device_is_usb,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = true,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS3)
+	{
+		.soc_id = UNIPHIER_PXS3_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_pxs3_boot_device_table,
+		.boot_device_count = &uniphier_pxs3_boot_device_count,
+		.boot_device_is_usb = uniphier_pxs3_boot_device_is_usb,
+		.boot_is_swapped = uniphier_sbc_boot_is_swapped,
+		.have_internal_stm = false,
+	},
+#endif
+};
+UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_boot_device_info,
+			     uniphier_boot_device_info)
+
+static unsigned int __uniphier_boot_device_raw(
+				const struct uniphier_boot_device_info *info)
+{
+	u32 pinmon;
+	unsigned int boot_sel;
+
+	if (info->boot_is_swapped && info->boot_is_swapped())
+		return BOOT_DEVICE_NOR;
+
+	pinmon = readl(sg_base + SG_PINMON0);
+
+	if (info->boot_device_is_sd && info->boot_device_is_sd(pinmon))
+		return BOOT_DEVICE_MMC2;
+
+	if (info->boot_device_is_usb && info->boot_device_is_usb(pinmon))
+		return BOOT_DEVICE_USB;
+
+	boot_sel = pinmon >> info->boot_device_sel_shift;
+
+	BUG_ON(!is_power_of_2(*info->boot_device_count));
+	boot_sel &= *info->boot_device_count - 1;
+
+	return info->boot_device_table[boot_sel].boot_device;
+}
+
+unsigned int uniphier_boot_device_raw(void)
+{
+	const struct uniphier_boot_device_info *info;
+
+	info = uniphier_get_boot_device_info();
+	if (!info) {
+		pr_err("unsupported SoC\n");
+		return BOOT_DEVICE_NONE;
+	}
+
+	return __uniphier_boot_device_raw(info);
+}
+
+u32 spl_boot_device(void)
+{
+	const struct uniphier_boot_device_info *info;
+	u32 raw_mode;
+
+	info = uniphier_get_boot_device_info();
+	if (!info) {
+		pr_err("unsupported SoC\n");
+		return BOOT_DEVICE_NONE;
+	}
+
+	raw_mode = __uniphier_boot_device_raw(info);
+
+	return info->boot_device_fixup ?
+				info->boot_device_fixup(raw_mode) : raw_mode;
+}
+
+int uniphier_have_internal_stm(void)
+{
+	const struct uniphier_boot_device_info *info;
+
+	info = uniphier_get_boot_device_info();
+	if (!info) {
+		pr_err("unsupported SoC\n");
+		return -ENOTSUPP;
+	}
+
+	return info->have_internal_stm;
+}
+
+int uniphier_boot_from_backend(void)
+{
+	return !!(readl(sg_base + SG_PINMON0) & BIT(27));
+}
+
+#ifndef CONFIG_SPL_BUILD
+
+static int do_pinmon(struct cmd_tbl *cmdtp, int flag, int argc,
+		     char *const argv[])
+{
+	const struct uniphier_boot_device_info *info;
+	u32 pinmon;
+	unsigned int boot_device_count, boot_sel;
+	int i;
+
+	info = uniphier_get_boot_device_info();
+	if (!info) {
+		pr_err("unsupported SoC\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if (uniphier_have_internal_stm())
+		printf("STB Micon: %s\n",
+		       uniphier_boot_from_backend() ? "OFF" : "ON");
+
+	if (info->boot_is_swapped)
+		printf("Boot Swap: %s\n",
+		       info->boot_is_swapped() ? "ON" : "OFF");
+
+	pinmon = readl(sg_base + SG_PINMON0);
+
+	if (info->boot_device_is_sd)
+		printf("SD Boot:  %s\n",
+		       info->boot_device_is_sd(pinmon) ? "ON" : "OFF");
+
+	if (info->boot_device_is_usb)
+		printf("USB Boot:  %s\n",
+		       info->boot_device_is_usb(pinmon) ? "ON" : "OFF");
+
+	boot_device_count = *info->boot_device_count;
+
+	boot_sel = pinmon >> info->boot_device_sel_shift;
+	boot_sel &= boot_device_count - 1;
+
+	printf("\nBoot Mode Sel:\n");
+	for (i = 0; i < boot_device_count; i++)
+		printf(" %c %02x %s\n", i == boot_sel ? '*' : ' ', i,
+		       info->boot_device_table[i].desc);
+
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	pinmon,	1,	1,	do_pinmon,
+	"pin monitor",
+	""
+);
+
+#endif /* !CONFIG_SPL_BUILD */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device.h b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device.h
new file mode 100644
index 000000000..bbb634316
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/boot-device/boot-device.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef _UNIPHIER_BOOT_DEVICE_H_
+#define _UNIPHIER_BOOT_DEVICE_H_
+
+struct uniphier_boot_device {
+	unsigned int boot_device;
+	const char *desc;
+};
+
+extern const struct uniphier_boot_device uniphier_ld4_boot_device_table[];
+extern const struct uniphier_boot_device uniphier_pro5_boot_device_table[];
+extern const struct uniphier_boot_device uniphier_pxs2_boot_device_table[];
+extern const struct uniphier_boot_device uniphier_ld11_boot_device_table[];
+extern const struct uniphier_boot_device uniphier_pxs3_boot_device_table[];
+
+extern const unsigned int uniphier_ld4_boot_device_count;
+extern const unsigned int uniphier_pro5_boot_device_count;
+extern const unsigned int uniphier_pxs2_boot_device_count;
+extern const unsigned int uniphier_ld11_boot_device_count;
+extern const unsigned int uniphier_pxs3_boot_device_count;
+
+int uniphier_pxs2_boot_device_is_usb(u32 pinmon);
+int uniphier_ld11_boot_device_is_usb(u32 pinmon);
+int uniphier_ld20_boot_device_is_usb(u32 pinmon);
+int uniphier_pxs3_boot_device_is_usb(u32 pinmon);
+
+unsigned int uniphier_pxs2_boot_device_fixup(unsigned int mode);
+
+#endif /* _UNIPHIER_BOOT_DEVICE_H_ */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/Makefile b/roms/u-boot/arch/arm/mach-uniphier/clk/Makefile
new file mode 100644
index 000000000..c49e44754
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+ifdef CONFIG_SPL_BUILD
+
+obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= clk-early-ld4.o clk-dram-ld4.o dpll-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= clk-early-ld4.o clk-dram-ld4.o dpll-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= clk-early-ld4.o clk-dram-ld4.o dpll-sld8.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO5)	+= clk-early-ld4.o clk-dram-pro5.o dpll-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o
+
+else
+
+obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= pll-ld4.o dpll-tail.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= clk-pro4.o pll-pro4.o dpll-tail.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= pll-ld4.o dpll-tail.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO5)	+= clk-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= clk-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= clk-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= clk-ld11.o pll-base-ld20.o pll-ld11.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= clk-ld20.o pll-base-ld20.o pll-ld20.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= clk-pxs3.o pll-base-ld20.o pll-pxs3.o
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-ld4.c
new file mode 100644
index 000000000..3b721eaf2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-ld4.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2017 Socionext Inc.
+ */
+
+#include <spl.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+void uniphier_ld4_dram_clk_init(void)
+{
+	u32 tmp;
+
+	/* deassert reset */
+	tmp = readl(sc_base + SC_RSTCTRL);
+	tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0;
+	writel(tmp, sc_base + SC_RSTCTRL);
+	readl(sc_base + SC_RSTCTRL); /* dummy read */
+
+	/* provide clocks */
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= SC_CLKCTRL_CEN_UMC;
+	writel(tmp, sc_base + SC_CLKCTRL);
+	readl(sc_base + SC_CLKCTRL); /* dummy read */
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-pro5.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-pro5.c
new file mode 100644
index 000000000..808d1ebfe
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-pro5.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2017 Socionext Inc.
+ */
+
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+void uniphier_pro5_dram_clk_init(void)
+{
+	u32 tmp;
+
+	/*
+	 * deassert reset
+	 * UMCA2: Ch1 (DDR3)
+	 * UMCA1, UMC31: Ch0 (WIO1)
+	 * UMCA0, UMC30: Ch0 (WIO0)
+	 */
+	tmp = readl(sc_base + SC_RSTCTRL4);
+	tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 |
+	       SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 |
+	       SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30;
+	writel(tmp, sc_base + SC_RSTCTRL4);
+	readl(sc_base + SC_RSTCTRL4); /* dummy read */
+
+	/* provide clocks */
+	tmp = readl(sc_base + SC_CLKCTRL4);
+	tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC1 |
+	       SC_CLKCTRL4_CEN_UMC0;
+	writel(tmp, sc_base + SC_CLKCTRL4);
+	readl(sc_base + SC_CLKCTRL4); /* dummy read */
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c
new file mode 100644
index 000000000..75d3e70d6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016-2017 Socionext Inc.
+ */
+
+#include <spl.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+void uniphier_pxs2_dram_clk_init(void)
+{
+	u32 tmp;
+
+	/* deassert reset */
+	tmp = readl(sc_base + SC_RSTCTRL4);
+	tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 |
+	       SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 |
+	       SC_RSTCTRL4_NRST_UMC32 | SC_RSTCTRL4_NRST_UMC31 |
+	       SC_RSTCTRL4_NRST_UMC30;
+	writel(tmp, sc_base + SC_RSTCTRL4);
+	readl(sc_base + SC_RSTCTRL4); /* dummy read */
+
+	/* provide clocks */
+	tmp = readl(sc_base + SC_CLKCTRL4);
+	tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC2 |
+	       SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0;
+	writel(tmp, sc_base + SC_CLKCTRL4);
+	readl(sc_base + SC_CLKCTRL4); /* dummy read */
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-early-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-early-ld4.c
new file mode 100644
index 000000000..25b72d892
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-early-ld4.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2017 Socionext Inc.
+ */
+
+#include <spl.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+void uniphier_ld4_early_clk_init(void)
+{
+	u32 tmp;
+
+	/* provide clocks */
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
+	writel(tmp, sc_base + SC_CLKCTRL);
+	readl(sc_base + SC_CLKCTRL); /* dummy read */
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-ld11.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-ld11.c
new file mode 100644
index 000000000..d241a6538
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-ld11.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ */
+
+#include <spl.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc64-regs.h"
+#include "../sg-regs.h"
+
+#define SDCTRL_EMMC_HW_RESET	0x59810280
+
+void uniphier_ld11_clk_init(void)
+{
+	/* if booted from a device other than USB, without stand-by MPU */
+	if ((readl(sg_base + SG_PINMON0) & BIT(27)) &&
+	    uniphier_boot_device_raw() != BOOT_DEVICE_USB) {
+		writel(1, sg_base + SG_ETPHYPSHUT);
+		writel(1, sg_base + SG_ETPHYCNT);
+
+		udelay(1); /* wait for regulator level 1.1V -> 2.5V */
+
+		writel(3, sg_base + SG_ETPHYCNT);
+		writel(3, sg_base + SG_ETPHYPSHUT);
+		writel(7, sg_base + SG_ETPHYCNT);
+	}
+
+	/* TODO: use "mmc-pwrseq-emmc" */
+	writel(1, SDCTRL_EMMC_HW_RESET);
+
+#ifdef CONFIG_USB_EHCI_HCD
+	{
+		int ch;
+
+		for (ch = 0; ch < 3; ch++) {
+			void __iomem *phyctrl = sg_base + SG_USBPHYCTRL;
+
+			writel(0x82280600, phyctrl + 8 * ch);
+			writel(0x00000106, phyctrl + 8 * ch + 4);
+		}
+	}
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-ld20.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-ld20.c
new file mode 100644
index 000000000..397b2d738
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-ld20.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc64-regs.h"
+
+#define SDCTRL_EMMC_HW_RESET	0x59810280
+
+void uniphier_ld20_clk_init(void)
+{
+	u32 tmp;
+
+	tmp = readl(sc_base + SC_RSTCTRL6);
+	tmp |= BIT(8);			/* Mali */
+	writel(tmp, sc_base + SC_RSTCTRL6);
+
+	tmp = readl(sc_base + SC_CLKCTRL6);
+	tmp |= BIT(8);			/* Mali */
+	writel(tmp, sc_base + SC_CLKCTRL6);
+
+	/* TODO: use "mmc-pwrseq-emmc" */
+	writel(1, SDCTRL_EMMC_HW_RESET);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pro4.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pro4.c
new file mode 100644
index 000000000..798128b30
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pro4.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+void uniphier_pro4_clk_init(void)
+{
+#ifdef CONFIG_USB_DWC3_UNIPHIER
+	u32 tmp;
+
+	/* deassert reset */
+	tmp = readl(sc_base + SC_RSTCTRL);
+	tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 |
+		SC_RSTCTRL_NRST_GIO;
+	writel(tmp, sc_base + SC_RSTCTRL);
+	readl(sc_base + SC_RSTCTRL); /* dummy read */
+
+	tmp = readl(sc_base + SC_RSTCTRL2);
+	tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1;
+	writel(tmp, sc_base + SC_RSTCTRL2);
+	readl(sc_base + SC_RSTCTRL2); /* dummy read */
+
+	/* provide clocks */
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
+		SC_CLKCTRL_CEN_GIO;
+	writel(tmp, sc_base + SC_CLKCTRL);
+	readl(sc_base + SC_CLKCTRL); /* dummy read */
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pro5.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pro5.c
new file mode 100644
index 000000000..36006fd25
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pro5.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+void uniphier_pro5_clk_init(void)
+{
+#ifdef CONFIG_USB_DWC3_UNIPHIER
+	u32 tmp;
+
+	/* deassert reset */
+	tmp = readl(sc_base + SC_RSTCTRL);
+	tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
+	writel(tmp, sc_base + SC_RSTCTRL);
+	readl(sc_base + SC_RSTCTRL); /* dummy read */
+
+	tmp = readl(sc_base + SC_RSTCTRL2);
+	tmp |= SC_RSTCTRL2_NRST_USB3B1;
+	writel(tmp, sc_base + SC_RSTCTRL2);
+	readl(sc_base + SC_RSTCTRL2); /* dummy read */
+
+	/* provide clocks */
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
+		SC_CLKCTRL_CEN_GIO;
+	writel(tmp, sc_base + SC_CLKCTRL);
+	readl(sc_base + SC_CLKCTRL); /* dummy read */
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pxs2.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pxs2.c
new file mode 100644
index 000000000..c2a75ce00
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pxs2.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+void uniphier_pxs2_clk_init(void)
+{
+#ifdef CONFIG_USB_DWC3_UNIPHIER
+	u32 tmp;
+
+	/* deassert reset */
+	tmp = readl(sc_base + SC_RSTCTRL);
+	tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
+	writel(tmp, sc_base + SC_RSTCTRL);
+	readl(sc_base + SC_RSTCTRL); /* dummy read */
+
+	tmp = readl(sc_base + SC_RSTCTRL2);
+	tmp |= SC_RSTCTRL2_NRST_USB3B1;
+	writel(tmp, sc_base + SC_RSTCTRL2);
+	readl(sc_base + SC_RSTCTRL2); /* dummy read */
+
+	tmp = readl(sc_base + SC_RSTCTRL6);
+	tmp |= 0x37;
+	writel(tmp, sc_base + SC_RSTCTRL6);
+
+	/* provide clocks */
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= BIT(20) | BIT(19) | SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
+		SC_CLKCTRL_CEN_GIO;
+	writel(tmp, sc_base + SC_CLKCTRL);
+	readl(sc_base + SC_CLKCTRL); /* dummy read */
+#endif
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pxs3.c b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pxs3.c
new file mode 100644
index 000000000..33b9c5b73
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/clk-pxs3.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc64-regs.h"
+
+#define SDCTRL_EMMC_HW_RESET	0x59810280
+
+void uniphier_pxs3_clk_init(void)
+{
+	u32 tmp;
+
+	tmp = readl(sc_base + SC_RSTCTRL6);
+	tmp |= BIT(8);			/* Mali */
+	writel(tmp, sc_base + SC_RSTCTRL6);
+
+	tmp = readl(sc_base + SC_CLKCTRL6);
+	tmp |= BIT(8);			/* Mali */
+	writel(tmp, sc_base + SC_CLKCTRL6);
+
+	/* TODO: use "mmc-pwrseq-emmc" */
+	writel(1, SDCTRL_EMMC_HW_RESET);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-ld4.c
new file mode 100644
index 000000000..3ccaf0224
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-ld4.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+#undef DPLL_SSC_RATE_1PER
+
+int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd)
+{
+	unsigned int dram_freq = bd->dram_freq;
+	u32 tmp;
+
+	/*
+	 * Set Frequency
+	 * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
+	 * to FOUT (DPLLCTRL.bit[29:20])
+	 */
+	tmp = readl(sc_base + SC_DPLLCTRL);
+	tmp &= ~0x000f0000;
+	switch (dram_freq) {
+	case 1333:
+		tmp |= 0x000d0000;
+		break;
+	case 1600:
+		tmp |= 0x000c0000;
+		break;
+	default:
+		pr_err("Unsupported frequency");
+		return -EINVAL;
+	}
+
+#if defined(DPLL_SSC_RATE_1PER)
+	tmp &= ~SC_DPLLCTRL_SSC_RATE;
+#else
+	tmp |= SC_DPLLCTRL_SSC_RATE;
+#endif
+	writel(tmp, sc_base + SC_DPLLCTRL);
+
+	tmp = readl(sc_base + SC_DPLLCTRL2);
+	tmp |= SC_DPLLCTRL2_NRSTDS;
+	writel(tmp, sc_base + SC_DPLLCTRL2);
+
+	/* Wait 500 usec until dpll gets stable */
+	udelay(500);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pro4.c b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pro4.c
new file mode 100644
index 000000000..44006ae6d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pro4.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+#undef DPLL_SSC_RATE_1PER
+
+int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd)
+{
+	unsigned int dram_freq = bd->dram_freq;
+	u32 tmp;
+
+	/*
+	 * Set Frequency
+	 * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
+	 * to FOUT ( DPLLCTRL.bit[29:20] )
+	 */
+	tmp = readl(sc_base + SC_DPLLCTRL);
+	tmp &= ~(0x000f0000);
+	switch (dram_freq) {
+	case 1333:
+		tmp |= 0x000d0000;
+		break;
+	case 1600:
+		tmp |= 0x000c0000;
+		break;
+	default:
+		pr_err("Unsupported frequency");
+		return -EINVAL;
+	}
+
+	/*
+	 * Set Moduration rate
+	 * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15])
+	 */
+#if defined(DPLL_SSC_RATE_1PER)
+	tmp &= ~0x00008000;
+#else
+	tmp |= 0x00008000;
+#endif
+	writel(tmp, sc_base + SC_DPLLCTRL);
+
+	tmp = readl(sc_base + SC_DPLLCTRL2);
+	tmp |= SC_DPLLCTRL2_NRSTDS;
+	writel(tmp, sc_base + SC_DPLLCTRL2);
+
+	/* Wait until dpll gets stable */
+	udelay(500);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pro5.c b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pro5.c
new file mode 100644
index 000000000..d3a42c7b4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pro5.c
@@ -0,0 +1,6 @@
+#include "../init.h"
+
+int uniphier_pro5_dpll_init(const struct uniphier_board_data *bd)
+{
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pxs2.c b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pxs2.c
new file mode 100644
index 000000000..328ebf61f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-pxs2.c
@@ -0,0 +1,6 @@
+#include "../init.h"
+
+int uniphier_pxs2_dpll_init(const struct uniphier_board_data *bd)
+{
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-sld8.c b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-sld8.c
new file mode 100644
index 000000000..1ac52d11f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-sld8.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+
+int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd)
+{
+	u32 tmp;
+	/*
+	 * Set DPLL SSC parameters for DPLLCTRL3
+	 * [23]    DIVN_TEST    0x1
+	 * [22:16] DIVN         0x50
+	 * [10]    FREFSEL_TEST 0x1
+	 * [9:8]   FREFSEL      0x2
+	 * [4]     ICPD_TEST    0x1
+	 * [3:0]   ICPD         0xb
+	 */
+	tmp = readl(sc_base + SC_DPLLCTRL3);
+	tmp &= ~0x00ff0717;
+	tmp |= 0x00d0061b;
+	writel(tmp, sc_base + SC_DPLLCTRL3);
+
+	/*
+	 * Set DPLL SSC parameters for DPLLCTRL
+	 *                    <-1%>          <-2%>
+	 * [29:20] SSC_UPCNT 132 (0x084)    132  (0x084)
+	 * [14:0]  SSC_dK    6335(0x18bf)   12710(0x31a6)
+	 */
+	tmp = readl(sc_base + SC_DPLLCTRL);
+	tmp &= ~0x3ff07fff;
+#ifdef DPLL_SSC_RATE_1PER
+	tmp |= 0x084018bf;
+#else
+	tmp |= 0x084031a6;
+#endif
+	writel(tmp, sc_base + SC_DPLLCTRL);
+
+	/*
+	 * Set DPLL SSC parameters for DPLLCTRL2
+	 * [31:29]  SSC_STEP     0
+	 * [27]     SSC_REG_REF  1
+	 * [26:20]  SSC_M        79     (0x4f)
+	 * [19:0]   SSC_K        964689 (0xeb851)
+	 */
+	tmp = readl(sc_base + SC_DPLLCTRL2);
+	tmp &= ~0xefffffff;
+	tmp |= 0x0cfeb851;
+	writel(tmp, sc_base + SC_DPLLCTRL2);
+
+	/* Wait 500 usec until dpll gets stable */
+	udelay(500);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-tail.c b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-tail.c
new file mode 100644
index 000000000..6ba5a3672
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/dpll-tail.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/io.h>
+
+#include "../sc-regs.h"
+#include "pll.h"
+
+void uniphier_ld4_dpll_ssc_en(void)
+{
+	u32 tmp;
+
+	tmp = readl(sc_base + SC_DPLLCTRL);
+	tmp |= SC_DPLLCTRL_SSC_EN;
+	writel(tmp, sc_base + SC_DPLLCTRL);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/pll-base-ld20.c b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-base-ld20.c
new file mode 100644
index 000000000..ea96d739c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-base-ld20.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+#include "../sc64-regs.h"
+#include "pll.h"
+
+/* PLL type: SSC */
+#define SC_PLLCTRL_SSC_DK_MASK		GENMASK(14, 0)
+#define SC_PLLCTRL_SSC_EN		BIT(31)
+#define SC_PLLCTRL2_NRSTDS		BIT(28)
+#define SC_PLLCTRL2_SSC_JK_MASK		GENMASK(26, 0)
+#define SC_PLLCTRL3_REGI_MASK		GENMASK(19, 16)
+
+/* PLL type: VPLL27 */
+#define SC_VPLL27CTRL_WP		BIT(0)
+#define SC_VPLL27CTRL3_K_LD		BIT(28)
+
+/* PLL type: DSPLL */
+#define SC_DSPLLCTRL2_K_LD		BIT(28)
+
+int uniphier_ld20_sscpll_init(unsigned long reg_base, unsigned int freq,
+			      unsigned int ssc_rate, unsigned int divn)
+{
+	void __iomem *base = sc_base + reg_base;
+	u32 tmp;
+
+	if (freq != UNIPHIER_PLL_FREQ_DEFAULT) {
+		tmp = readl(base);	/* SSCPLLCTRL */
+		tmp &= ~SC_PLLCTRL_SSC_DK_MASK;
+		tmp |= FIELD_PREP(SC_PLLCTRL_SSC_DK_MASK,
+				  DIV_ROUND_CLOSEST(487UL * freq * ssc_rate,
+						    divn * 512));
+		writel(tmp, base);
+
+		tmp = readl(base + 4);
+		tmp &= ~SC_PLLCTRL2_SSC_JK_MASK;
+		tmp |= FIELD_PREP(SC_PLLCTRL2_SSC_JK_MASK,
+				  DIV_ROUND_CLOSEST(21431887UL * freq,
+						    divn * 512));
+		writel(tmp, base + 4);
+
+		udelay(50);
+	}
+
+	tmp = readl(base + 4);		/* SSCPLLCTRL2 */
+	tmp |= SC_PLLCTRL2_NRSTDS;
+	writel(tmp, base + 4);
+
+	return 0;
+}
+
+int uniphier_ld20_sscpll_ssc_en(unsigned long reg_base)
+{
+	void __iomem *base = sc_base + reg_base;
+	u32 tmp;
+
+	tmp = readl(base);	/* SSCPLLCTRL */
+	tmp |= SC_PLLCTRL_SSC_EN;
+	writel(tmp, base);
+
+	return 0;
+}
+
+int uniphier_ld20_sscpll_set_regi(unsigned long reg_base, unsigned regi)
+{
+	void __iomem *base = sc_base + reg_base;
+	u32 tmp;
+
+	tmp = readl(base + 8);	/* SSCPLLCTRL3 */
+	tmp &= ~SC_PLLCTRL3_REGI_MASK;
+	tmp |= FIELD_PREP(SC_PLLCTRL3_REGI_MASK, regi);
+	writel(tmp, base + 8);
+
+	return 0;
+}
+
+int uniphier_ld20_vpll27_init(unsigned long reg_base)
+{
+	void __iomem *base = sc_base + reg_base;
+	u32 tmp;
+
+	tmp = readl(base);		/* VPLL27CTRL */
+	tmp |= SC_VPLL27CTRL_WP;	/* write protect off */
+	writel(tmp, base);
+
+	tmp = readl(base + 8);		/* VPLL27CTRL3 */
+	tmp |= SC_VPLL27CTRL3_K_LD;
+	writel(tmp, base + 8);
+
+	tmp = readl(base);		/* VPLL27CTRL */
+	tmp &= ~SC_VPLL27CTRL_WP;	/* write protect on */
+	writel(tmp, base);
+
+	return 0;
+}
+
+int uniphier_ld20_dspll_init(unsigned long reg_base)
+{
+	void __iomem *base = sc_base + reg_base;
+	u32 tmp;
+
+	tmp = readl(base + 4);		/* DSPLLCTRL2 */
+	tmp |= SC_DSPLLCTRL2_K_LD;
+	writel(tmp, base + 4);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld11.c b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld11.c
new file mode 100644
index 000000000..7f07e3e92
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld11.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc64-regs.h"
+#include "pll.h"
+
+/* PLL type: SSC */
+#define SC_CPLLCTRL	0x1400	/* CPU/ARM */
+#define SC_SPLLCTRL	0x1410	/* misc */
+#define SC_MPLLCTRL	0x1430	/* DSP */
+#define SC_VSPLLCTRL	0x1440	/* Video codec, VPE etc. */
+#define SC_DPLLCTRL	0x1460	/* DDR memory */
+
+/* PLL type: VPLL27 */
+#define SC_VPLL27FCTRL	0x1500
+#define SC_VPLL27ACTRL	0x1520
+
+void uniphier_ld11_pll_init(void)
+{
+	uniphier_ld20_sscpll_init(SC_CPLLCTRL, 1960, 1, 2);	/* 2000MHz -> 1960MHz */
+	/* do nothing for SPLL */
+	uniphier_ld20_sscpll_init(SC_MPLLCTRL, 1600, 1, 2);	/* 1500MHz -> 1600MHz */
+	uniphier_ld20_sscpll_init(SC_VSPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
+
+	uniphier_ld20_sscpll_set_regi(SC_MPLLCTRL, 5);
+
+	mdelay(1);
+
+	uniphier_ld20_sscpll_ssc_en(SC_CPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_MPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_VSPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_DPLLCTRL);
+
+	uniphier_ld20_vpll27_init(SC_VPLL27FCTRL);
+	uniphier_ld20_vpll27_init(SC_VPLL27ACTRL);
+
+	writel(0, sc_base + SC_CA53_GEARSET);	/* Gear0: CPLL/2 */
+	writel(SC_CA_GEARUPD, sc_base + SC_CA53_GEARUPD);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld20.c b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld20.c
new file mode 100644
index 000000000..04b3312a2
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld20.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/delay.h>
+
+#include "../init.h"
+#include "../sc64-regs.h"
+#include "pll.h"
+
+/* PLL type: SSC */
+#define SC_CPLLCTRL	0x1400	/* CPU/ARM */
+#define SC_SPLLCTRL	0x1410	/* misc */
+#define SC_SPLL2CTRL	0x1420	/* DSP */
+#define SC_MPLLCTRL	0x1430	/* Video codec */
+#define SC_VPPLLCTRL	0x1440	/* VPE etc. */
+#define SC_GPPLLCTRL	0x1450	/* GPU/Mali */
+#define SC_DPLL0CTRL	0x1460	/* DDR memory 0 */
+#define SC_DPLL1CTRL	0x1470	/* DDR memory 1 */
+#define SC_DPLL2CTRL	0x1480	/* DDR memory 2 */
+
+/* PLL type: VPLL27 */
+#define SC_VPLL27FCTRL	0x1500
+#define SC_VPLL27ACTRL	0x1520
+
+/* PLL type: DSPLL */
+#define SC_VPLL8KCTRL	0x1540
+#define SC_A2PLLCTRL	0x15C0
+
+void uniphier_ld20_pll_init(void)
+{
+	uniphier_ld20_sscpll_init(SC_CPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4);
+	/* do nothing for SPLL */
+	uniphier_ld20_sscpll_init(SC_SPLL2CTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4);
+	uniphier_ld20_sscpll_init(SC_MPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
+	uniphier_ld20_sscpll_init(SC_VPPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4);
+	uniphier_ld20_sscpll_init(SC_GPPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
+
+	mdelay(1);
+
+	uniphier_ld20_sscpll_ssc_en(SC_CPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_SPLL2CTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_MPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_VPPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_GPPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_DPLL0CTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_DPLL1CTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_DPLL2CTRL);
+
+	uniphier_ld20_vpll27_init(SC_VPLL27FCTRL);
+	uniphier_ld20_vpll27_init(SC_VPLL27ACTRL);
+
+	uniphier_ld20_dspll_init(SC_VPLL8KCTRL);
+	uniphier_ld20_dspll_init(SC_A2PLLCTRL);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld4.c
new file mode 100644
index 000000000..c66031bdd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-ld4.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+#include "pll.h"
+
+static void upll_init(void)
+{
+	u32 tmp, clk_mode_upll, clk_mode_axosel;
+
+	tmp = readl(sg_base + SG_PINMON0);
+	clk_mode_upll   = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
+	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+	/* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
+	tmp = readl(sc_base + SC_UPLLCTRL);
+	tmp &= ~0x18000000;
+	writel(tmp, sc_base + SC_UPLLCTRL);
+
+	if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
+		if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+		    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+			/* AXO: 25MHz */
+			tmp &= ~0x07ffffff;
+			tmp |= 0x0228f5c0;
+		} else {
+			/* AXO: default 24.576MHz */
+			tmp &= ~0x07ffffff;
+			tmp |= 0x02328000;
+		}
+	}
+
+	writel(tmp, sc_base + SC_UPLLCTRL);
+
+	/* set 1 to K_LD(UPLLCTRL.bit[27]) */
+	tmp |= 0x08000000;
+	writel(tmp, sc_base + SC_UPLLCTRL);
+
+	/* wait 10 usec */
+	udelay(10);
+
+	/* set 1 to SNRT(UPLLCTRL.bit[28]) */
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_UPLLCTRL);
+}
+
+static void vpll_init(void)
+{
+	u32 tmp, clk_mode_axosel;
+
+	tmp = readl(sg_base + SG_PINMON0);
+	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+	/* set 1 to VPLA27WP and VPLA27WP */
+	tmp = readl(sc_base + SC_VPLL27ACTRL);
+	tmp |= 0x00000001;
+	writel(tmp, sc_base + SC_VPLL27ACTRL);
+	tmp = readl(sc_base + SC_VPLL27BCTRL);
+	tmp |= 0x00000001;
+	writel(tmp, sc_base + SC_VPLL27BCTRL);
+
+	/* Set 0 to VPLA_K_LD and VPLB_K_LD */
+	tmp = readl(sc_base + SC_VPLL27ACTRL3);
+	tmp &= ~0x10000000;
+	writel(tmp, sc_base + SC_VPLL27ACTRL3);
+	tmp = readl(sc_base + SC_VPLL27BCTRL3);
+	tmp &= ~0x10000000;
+	writel(tmp, sc_base + SC_VPLL27BCTRL3);
+
+	/* Set 0 to VPLA_SNRST and VPLB_SNRST */
+	tmp = readl(sc_base + SC_VPLL27ACTRL2);
+	tmp &= ~0x10000000;
+	writel(tmp, sc_base + SC_VPLL27ACTRL2);
+	tmp = readl(sc_base + SC_VPLL27BCTRL2);
+	tmp &= ~0x10000000;
+	writel(tmp, sc_base + SC_VPLL27BCTRL2);
+
+	/* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
+	tmp = readl(sc_base + SC_VPLL27ACTRL2);
+	tmp &= ~0x0000007f;
+	tmp |= 0x00000020;
+	writel(tmp, sc_base + SC_VPLL27ACTRL2);
+	tmp = readl(sc_base + SC_VPLL27BCTRL2);
+	tmp &= ~0x0000007f;
+	tmp |= 0x00000020;
+	writel(tmp, sc_base + SC_VPLL27BCTRL2);
+
+	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+		/* AXO: 25MHz */
+		tmp = readl(sc_base + SC_VPLL27ACTRL3);
+		tmp &= ~0x000fffff;
+		tmp |= 0x00066664;
+		writel(tmp, sc_base + SC_VPLL27ACTRL3);
+		tmp = readl(sc_base + SC_VPLL27BCTRL3);
+		tmp &= ~0x000fffff;
+		tmp |= 0x00066664;
+		writel(tmp, sc_base + SC_VPLL27BCTRL3);
+	} else {
+		/* AXO: default 24.576MHz */
+		tmp = readl(sc_base + SC_VPLL27ACTRL3);
+		tmp &= ~0x000fffff;
+		tmp |= 0x000f5800;
+		writel(tmp, sc_base + SC_VPLL27ACTRL3);
+		tmp = readl(sc_base + SC_VPLL27BCTRL3);
+		tmp &= ~0x000fffff;
+		tmp |= 0x000f5800;
+		writel(tmp, sc_base + SC_VPLL27BCTRL3);
+	}
+
+	/* Set 1 to VPLA_K_LD and VPLB_K_LD */
+	tmp = readl(sc_base + SC_VPLL27ACTRL3);
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_VPLL27ACTRL3);
+	tmp = readl(sc_base + SC_VPLL27BCTRL3);
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_VPLL27BCTRL3);
+
+	/* wait 10 usec */
+	udelay(10);
+
+	/* Set 0 to VPLA_SNRST and VPLB_SNRST */
+	tmp = readl(sc_base + SC_VPLL27ACTRL2);
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_VPLL27ACTRL2);
+	tmp = readl(sc_base + SC_VPLL27BCTRL2);
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_VPLL27BCTRL2);
+
+	/* set 0 to VPLA27WP and VPLA27WP */
+	tmp = readl(sc_base + SC_VPLL27ACTRL);
+	tmp &= ~0x00000001;
+	writel(tmp, sc_base + SC_VPLL27ACTRL);
+	tmp = readl(sc_base + SC_VPLL27BCTRL);
+	tmp |= ~0x00000001;
+	writel(tmp, sc_base + SC_VPLL27BCTRL);
+}
+
+void uniphier_ld4_pll_init(void)
+{
+	upll_init();
+	vpll_init();
+	uniphier_ld4_dpll_ssc_en();
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/pll-pro4.c b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-pro4.c
new file mode 100644
index 000000000..b7dc3e261
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-pro4.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+#include "pll.h"
+
+static void vpll_init(void)
+{
+	u32 tmp, clk_mode_axosel;
+
+	/* Set VPLL27A &  VPLL27B */
+	tmp = readl(sg_base + SG_PINMON0);
+	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+	/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
+	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
+	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
+		return;
+
+	/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
+	tmp = readl(sc_base + SC_VPLL27ACTRL);
+	tmp |= 0x00000001;
+	writel(tmp, sc_base + SC_VPLL27ACTRL);
+	tmp = readl(sc_base + SC_VPLL27BCTRL);
+	tmp |= 0x00000001;
+	writel(tmp, sc_base + SC_VPLL27BCTRL);
+
+	/* Unset VPLA_K_LD and VPLB_K_LD bit */
+	tmp = readl(sc_base + SC_VPLL27ACTRL3);
+	tmp &= ~0x10000000;
+	writel(tmp, sc_base + SC_VPLL27ACTRL3);
+	tmp = readl(sc_base + SC_VPLL27BCTRL3);
+	tmp &= ~0x10000000;
+	writel(tmp, sc_base + SC_VPLL27BCTRL3);
+
+	/* Set VPLA_M and VPLB_M to 0x20 */
+	tmp = readl(sc_base + SC_VPLL27ACTRL2);
+	tmp &= ~0x0000007f;
+	tmp |= 0x00000020;
+	writel(tmp, sc_base + SC_VPLL27ACTRL2);
+	tmp = readl(sc_base + SC_VPLL27BCTRL2);
+	tmp &= ~0x0000007f;
+	tmp |= 0x00000020;
+	writel(tmp, sc_base + SC_VPLL27BCTRL2);
+
+	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
+	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
+		/* Set VPLA_K and VPLB_K for AXO: 25MHz */
+		tmp = readl(sc_base + SC_VPLL27ACTRL3);
+		tmp &= ~0x000fffff;
+		tmp |= 0x00066666;
+		writel(tmp, sc_base + SC_VPLL27ACTRL3);
+		tmp = readl(sc_base + SC_VPLL27BCTRL3);
+		tmp &= ~0x000fffff;
+		tmp |= 0x00066666;
+		writel(tmp, sc_base + SC_VPLL27BCTRL3);
+	} else {
+		/* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
+		tmp = readl(sc_base + SC_VPLL27ACTRL3);
+		tmp &= ~0x000fffff;
+		tmp |= 0x000f5800;
+		writel(tmp, sc_base + SC_VPLL27ACTRL3);
+		tmp = readl(sc_base + SC_VPLL27BCTRL3);
+		tmp &= ~0x000fffff;
+		tmp |= 0x000f5800;
+		writel(tmp, sc_base + SC_VPLL27BCTRL3);
+	}
+
+	/* wait 1 usec */
+	udelay(1);
+
+	/* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
+	tmp = readl(sc_base + SC_VPLL27ACTRL3);
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_VPLL27ACTRL3);
+	tmp = readl(sc_base + SC_VPLL27BCTRL3);
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_VPLL27BCTRL3);
+
+	/* Unset VPLA_SNRST and VPLB_SNRST bit */
+	tmp = readl(sc_base + SC_VPLL27ACTRL2);
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_VPLL27ACTRL2);
+	tmp = readl(sc_base + SC_VPLL27BCTRL2);
+	tmp |= 0x10000000;
+	writel(tmp, sc_base + SC_VPLL27BCTRL2);
+
+	/* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
+	tmp = readl(sc_base + SC_VPLL27ACTRL);
+	tmp &= ~0x00000001;
+	writel(tmp, sc_base + SC_VPLL27ACTRL);
+	tmp = readl(sc_base + SC_VPLL27BCTRL);
+	tmp &= ~0x00000001;
+	writel(tmp, sc_base + SC_VPLL27BCTRL);
+}
+
+void uniphier_pro4_pll_init(void)
+{
+	vpll_init();
+	uniphier_ld4_dpll_ssc_en();
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/pll-pxs3.c b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-pxs3.c
new file mode 100644
index 000000000..278f530ea
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/pll-pxs3.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ */
+
+#include <linux/delay.h>
+
+#include "../init.h"
+#include "../sc64-regs.h"
+#include "pll.h"
+
+/* PLL type: SSC */
+#define SC_CPLLCTRL	0x1400	/* CPU/ARM */
+#define SC_SPLLCTRL	0x1410	/* misc */
+#define SC_SPLL2CTRL	0x1420	/* DSP */
+#define SC_VPPLLCTRL	0x1430	/* VPE */
+#define SC_VGPLLCTRL	0x1440
+#define SC_DECPLLCTRL	0x1450
+#define SC_ENCPLLCTRL	0x1460
+#define SC_PXFPLLCTRL	0x1470
+#define SC_DPLL0CTRL	0x1480	/* DDR memory 0 */
+#define SC_DPLL1CTRL	0x1490	/* DDR memory 1 */
+#define SC_DPLL2CTRL	0x14a0	/* DDR memory 2 */
+#define SC_VSPLLCTRL	0x14c0
+
+/* PLL type: VPLL27 */
+#define SC_VPLL27FCTRL	0x1500
+#define SC_VPLL27ACTRL	0x1520
+
+/* PLL type: DSPLL */
+#define SC_VPLL8KCTRL	0x1540
+
+void uniphier_pxs3_pll_init(void)
+{
+	uniphier_ld20_sscpll_init(SC_CPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4);
+	/* do nothing for SPLL */
+	uniphier_ld20_sscpll_init(SC_SPLL2CTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4);
+	uniphier_ld20_sscpll_init(SC_VPPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
+	uniphier_ld20_sscpll_init(SC_VGPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
+	uniphier_ld20_sscpll_init(SC_DECPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
+	uniphier_ld20_sscpll_init(SC_ENCPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4);
+	uniphier_ld20_sscpll_init(SC_PXFPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
+	uniphier_ld20_sscpll_init(SC_VSPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
+
+	mdelay(1);
+
+	uniphier_ld20_sscpll_ssc_en(SC_CPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_SPLL2CTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_VPPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_VGPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_DECPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_ENCPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_PXFPLLCTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_DPLL0CTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_DPLL1CTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_DPLL2CTRL);
+	uniphier_ld20_sscpll_ssc_en(SC_VSPLLCTRL);
+
+	uniphier_ld20_vpll27_init(SC_VPLL27FCTRL);
+	uniphier_ld20_vpll27_init(SC_VPLL27ACTRL);
+
+	uniphier_ld20_dspll_init(SC_VPLL8KCTRL);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/clk/pll.h b/roms/u-boot/arch/arm/mach-uniphier/clk/pll.h
new file mode 100644
index 000000000..dbdbd2b45
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/clk/pll.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef MACH_PLL_H
+#define MACH_PLL_H
+
+#define UNIPHIER_PLL_FREQ_DEFAULT	(0)
+
+void uniphier_ld4_dpll_ssc_en(void);
+
+int uniphier_ld20_sscpll_init(unsigned long reg_base, unsigned int freq,
+			      unsigned int ssc_rate, unsigned int divn);
+int uniphier_ld20_sscpll_ssc_en(unsigned long reg_base);
+int uniphier_ld20_sscpll_set_regi(unsigned long reg_base, unsigned regi);
+int uniphier_ld20_vpll27_init(unsigned long reg_base);
+int uniphier_ld20_dspll_init(unsigned long reg_base);
+
+#endif /* MACH_PLL_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/cpu-info.c b/roms/u-boot/arch/arm/mach-uniphier/cpu-info.c
new file mode 100644
index 000000000..1ede50771
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/cpu-info.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <init.h>
+#include <stdio.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/printk.h>
+
+#include "base-address.h"
+#include "soc-info.h"
+
+int print_cpuinfo(void)
+{
+	unsigned int id, model, rev, required_model = 1, required_rev = 1;
+	int ret;
+
+	ret = uniphier_base_address_init();
+	if (ret)
+		return ret;
+
+	id = uniphier_get_soc_id();
+	model = uniphier_get_soc_model();
+	rev = uniphier_get_soc_revision();
+
+	puts("SoC:   ");
+
+	switch (id) {
+	case UNIPHIER_LD4_ID:
+		puts("LD4");
+		required_rev = 2;
+		break;
+	case UNIPHIER_PRO4_ID:
+		puts("Pro4");
+		break;
+	case UNIPHIER_SLD8_ID:
+		puts("sLD8");
+		break;
+	case UNIPHIER_PRO5_ID:
+		puts("Pro5");
+		break;
+	case UNIPHIER_PXS2_ID:
+		puts("PXs2");
+		break;
+	case UNIPHIER_LD6B_ID:
+		puts("LD6b");
+		break;
+	case UNIPHIER_LD11_ID:
+		puts("LD11");
+		break;
+	case UNIPHIER_LD20_ID:
+		puts("LD20");
+		break;
+	case UNIPHIER_PXS3_ID:
+		puts("PXs3");
+		break;
+	default:
+		printf("Unknown Processor ID (0x%x)\n", id);
+		return -ENOTSUPP;
+	}
+
+	printf(" (model %d, revision %d)\n", model, rev);
+
+	if (model < required_model) {
+		pr_err("Only model %d or newer is supported.\n",
+		       required_model);
+		return -ENOTSUPP;
+	} else if (rev < required_rev) {
+		pr_err("Only revision %d or newer is supported.\n",
+		       required_rev);
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/Makefile b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/Makefile
new file mode 100644
index 000000000..81e9314a5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= debug-uart-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= debug-uart-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= debug-uart-sld8.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO5)	+= debug-uart-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= debug-uart-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= debug-uart-ld6b.o
+endif
+
+obj-y					+= debug-uart.o
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-ld4.c
new file mode 100644
index 000000000..10a7087c0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-ld4.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <linux/kernel.h>
+
+#include "../sg-regs.h"
+#include "debug-uart.h"
+
+#define UNIPHIER_LD4_UART_CLK		36864000
+
+unsigned int uniphier_ld4_debug_uart_init(void)
+{
+	sg_set_iectrl(0);
+	sg_set_pinsel(88, 1, 8, 4);	/* HSDOUT6 -> TXD0 */
+
+	return DIV_ROUND_CLOSEST(UNIPHIER_LD4_UART_CLK, 16 * CONFIG_BAUDRATE);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c
new file mode 100644
index 000000000..f64ff39c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+#include "debug-uart.h"
+
+#define UNIPHIER_LD6B_UART_CLK		88888888
+
+unsigned int uniphier_ld6b_debug_uart_init(void)
+{
+	u32 tmp;
+
+	sg_set_iectrl(0);
+	sg_set_pinsel(135, 3, 8, 4);	/* PORT10 -> TXD0 */
+	sg_set_pinsel(115, 0, 8, 4);	/* TXD1 -> TXD1 */
+	sg_set_pinsel(113, 2, 8, 4);	/* SBO0 -> TXD2 */
+
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= SC_CLKCTRL_CEN_PERI;
+	writel(tmp, sc_base + SC_CLKCTRL);
+
+	return DIV_ROUND_CLOSEST(UNIPHIER_LD6B_UART_CLK, 16 * CONFIG_BAUDRATE);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c
new file mode 100644
index 000000000..79c6c101e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+#include "debug-uart.h"
+
+#define UNIPHIER_PRO4_UART_CLK		73728000
+
+unsigned int uniphier_pro4_debug_uart_init(void)
+{
+	u32 tmp;
+
+	sg_set_iectrl(0);
+	sg_set_pinsel(128, 0, 4, 8);	/* TXD0 -> TXD0 */
+
+	writel(1, sg_base + SG_LOADPINCTRL);
+
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= SC_CLKCTRL_CEN_PERI;
+	writel(tmp, sc_base + SC_CLKCTRL);
+
+	return DIV_ROUND_CLOSEST(UNIPHIER_PRO4_UART_CLK, 16 * CONFIG_BAUDRATE);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c
new file mode 100644
index 000000000..ef3b383ee
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+#include "debug-uart.h"
+
+#define UNIPHIER_PRO5_UART_CLK		73728000
+
+unsigned int uniphier_pro5_debug_uart_init(void)
+{
+	u32 tmp;
+
+	sg_set_iectrl(0);
+	sg_set_pinsel(47, 0, 4, 8);	/* TXD0 -> TXD0 */
+	sg_set_pinsel(49, 0, 4, 8);	/* TXD1 -> TXD1 */
+	sg_set_pinsel(51, 0, 4, 8);	/* TXD2 -> TXD2 */
+	sg_set_pinsel(53, 0, 4, 8);	/* TXD3 -> TXD3 */
+
+	writel(1, sg_base + SG_LOADPINCTRL);
+
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= SC_CLKCTRL_CEN_PERI;
+	writel(tmp, sc_base + SC_CLKCTRL);
+
+	return DIV_ROUND_CLOSEST(UNIPHIER_PRO5_UART_CLK, 16 * CONFIG_BAUDRATE);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c
new file mode 100644
index 000000000..ee8caad1d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+#include "debug-uart.h"
+
+#define UNIPHIER_PXS2_UART_CLK		88888888
+
+unsigned int uniphier_pxs2_debug_uart_init(void)
+{
+	u32 tmp;
+
+	sg_set_iectrl(0);
+	sg_set_pinsel(217, 8, 8, 4);	/* TXD0 -> TXD0 */
+	sg_set_pinsel(115, 8, 8, 4);	/* TXD1 -> TXD1 */
+	sg_set_pinsel(113, 8, 8, 4);	/* TXD2 -> TXD2 */
+	sg_set_pinsel(219, 8, 8, 4);	/* TXD3 -> TXD3 */
+
+	tmp = readl(sc_base + SC_CLKCTRL);
+	tmp |= SC_CLKCTRL_CEN_PERI;
+	writel(tmp, sc_base + SC_CLKCTRL);
+
+	return DIV_ROUND_CLOSEST(UNIPHIER_PXS2_UART_CLK, 16 * CONFIG_BAUDRATE);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-sld8.c b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-sld8.c
new file mode 100644
index 000000000..da16abdba
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart-sld8.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <config.h>
+#include <linux/kernel.h>
+
+#include "../sg-regs.h"
+#include "debug-uart.h"
+
+#define UNIPHIER_SLD8_UART_CLK		80000000
+
+unsigned int uniphier_sld8_debug_uart_init(void)
+{
+	sg_set_iectrl(0);
+	sg_set_pinsel(70, 3, 8, 4);	/* HSDOUT6 -> TXD0 */
+
+	return DIV_ROUND_CLOSEST(UNIPHIER_SLD8_UART_CLK, 16 * CONFIG_BAUDRATE);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart.c b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart.c
new file mode 100644
index 000000000..d116d4681
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <debug_uart.h>
+#include <linux/io.h>
+#include <linux/serial_reg.h>
+
+#include "../sg-regs.h"
+#include "../soc-info.h"
+#include "debug-uart.h"
+
+#define UNIPHIER_UART_TX		0x00
+#define UNIPHIER_UART_LCR_MCR		0x10
+#define UNIPHIER_UART_LSR		0x14
+#define UNIPHIER_UART_LDR		0x24
+
+static void _debug_uart_putc(int c)
+{
+	void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
+
+	while (!(readl(base + UNIPHIER_UART_LSR) & UART_LSR_THRE))
+		;
+
+	writel(c, base + UNIPHIER_UART_TX);
+}
+
+#ifdef CONFIG_SPL_BUILD
+void sg_set_pinsel(unsigned int pin, unsigned int muxval,
+		   unsigned int mux_bits, unsigned int reg_stride)
+{
+	unsigned int shift = pin * mux_bits % 32;
+	void __iomem *reg = sg_base + SG_PINCTRL_BASE +
+					pin * mux_bits / 32 * reg_stride;
+	u32 mask = (1U << mux_bits) - 1;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp &= ~(mask << shift);
+	tmp |= (mask & muxval) << shift;
+	writel(tmp, reg);
+}
+
+void sg_set_iectrl(unsigned int pin)
+{
+	unsigned int bit = pin % 32;
+	void __iomem *reg = sg_base + SG_IECTRL + pin / 32 * 4;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp |= 1 << bit;
+	writel(tmp, reg);
+}
+#endif
+
+void _debug_uart_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
+	unsigned int divisor;
+
+	switch (uniphier_get_soc_id()) {
+#if defined(CONFIG_ARCH_UNIPHIER_LD4)
+	case UNIPHIER_LD4_ID:
+		divisor = uniphier_ld4_debug_uart_init();
+		break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
+	case UNIPHIER_PRO4_ID:
+		divisor = uniphier_pro4_debug_uart_init();
+		break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
+	case UNIPHIER_SLD8_ID:
+		divisor = uniphier_sld8_debug_uart_init();
+		break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
+	case UNIPHIER_PRO5_ID:
+		divisor = uniphier_pro5_debug_uart_init();
+		break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
+	case UNIPHIER_PXS2_ID:
+		divisor = uniphier_pxs2_debug_uart_init();
+		break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
+	case UNIPHIER_LD6B_ID:
+		divisor = uniphier_ld6b_debug_uart_init();
+		break;
+#endif
+	default:
+		return;
+	}
+
+	writel(UART_LCR_WLEN8 << 8, base + UNIPHIER_UART_LCR_MCR);
+
+	writel(divisor, base + UNIPHIER_UART_LDR);
+#endif
+}
+DEBUG_UART_FUNCS
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart.h b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart.h
new file mode 100644
index 000000000..f4e98c0bb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug-uart/debug-uart.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef _MACH_DEBUG_UART_H
+#define _MACH_DEBUG_UART_H
+
+unsigned int uniphier_ld4_debug_uart_init(void);
+unsigned int uniphier_pro4_debug_uart_init(void);
+unsigned int uniphier_sld8_debug_uart_init(void);
+unsigned int uniphier_pro5_debug_uart_init(void);
+unsigned int uniphier_pxs2_debug_uart_init(void);
+unsigned int uniphier_ld6b_debug_uart_init(void);
+
+void sg_set_pinsel(unsigned int pin, unsigned int muxval,
+		   unsigned int mux_bits, unsigned int reg_stride);
+void sg_set_iectrl(unsigned int pin);
+
+#endif /* _MACH_DEBUG_UART_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/debug.h b/roms/u-boot/arch/arm/mach-uniphier/debug.h
new file mode 100644
index 000000000..466dc9b03
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/debug.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef __DEBUG_H__
+#define __DEBUG_H__
+
+#include <linux/io.h>
+#include <linux/serial_reg.h>
+
+#define DEBUG_UART_BASE		0x54006800
+#define UART_SHIFT 2
+
+#define UNIPHIER_UART_TX		0
+#define UNIPHIER_UART_LSR		(5 * 4)
+
+/* All functions are inline so that they can be called from .secure section. */
+
+#ifdef DEBUG
+static inline void debug_putc(int c)
+{
+	void __iomem *base = (void __iomem *)DEBUG_UART_BASE;
+
+	while (!(readl(base + UNIPHIER_UART_LSR) & UART_LSR_THRE))
+		;
+
+	writel(c, base + UNIPHIER_UART_TX);
+}
+
+static inline void debug_puts(const char *s)
+{
+	while (*s) {
+		if (*s == '\n')
+			debug_putc('\r');
+
+		debug_putc(*s++);
+	}
+}
+
+static inline void debug_puth(unsigned long val)
+{
+	int i;
+	unsigned char c;
+
+	for (i = 8; i--; ) {
+		c = ((val >> (i * 4)) & 0xf);
+		c += (c >= 10) ? 'a' - 10 : '0';
+		debug_putc(c);
+	}
+}
+#else
+static inline void debug_putc(int c)
+{
+}
+
+static inline void debug_puts(const char *s)
+{
+}
+
+static inline void debug_puth(unsigned long val)
+{
+}
+#endif
+
+#endif /* __DEBUG_H__ */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/Makefile b/roms/u-boot/arch/arm/mach-uniphier/dram/Makefile
new file mode 100644
index 000000000..7d11315d0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+ifdef CONFIG_SPL_BUILD
+
+obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= umc-ld4.o \
+					   ddrphy-training.o ddrphy-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= umc-pro4.o \
+					   ddrphy-training.o ddrphy-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= umc-sld8.o \
+					   ddrphy-training.o ddrphy-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO5)	+= umc-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= umc-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= umc-pxs2.o
+
+else
+
+obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o
+obj-$(CONFIG_CMD_DDRMPHY_DUMP) += cmd_ddrmphy.o
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c b/roms/u-boot/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c
new file mode 100644
index 000000000..629f8b90c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <command.h>
+#include <stdio.h>
+#include <linux/io.h>
+#include <linux/printk.h>
+#include <linux/sizes.h>
+
+#include "../soc-info.h"
+#include "ddrmphy-regs.h"
+
+/* Select either decimal or hexadecimal */
+#if 1
+#define PRINTF_FORMAT "%2d"
+#else
+#define PRINTF_FORMAT "%02x"
+#endif
+/* field separator */
+#define FS "   "
+
+#define ptr_to_uint(p)	((unsigned int)(unsigned long)(p))
+
+#define UNIPHIER_MAX_NR_DDRMPHY		3
+
+struct uniphier_ddrmphy_param {
+	unsigned int soc_id;
+	unsigned int nr_phy;
+	struct {
+		resource_size_t base;
+		unsigned int nr_zq;
+		unsigned int nr_dx;
+	} phy[UNIPHIER_MAX_NR_DDRMPHY];
+};
+
+static const struct uniphier_ddrmphy_param uniphier_ddrmphy_param[] = {
+	{
+		.soc_id = UNIPHIER_PXS2_ID,
+		.nr_phy = 3,
+		.phy = {
+			{ .base = 0x5b830000, .nr_zq = 3, .nr_dx = 4, },
+			{ .base = 0x5ba30000, .nr_zq = 3, .nr_dx = 4, },
+			{ .base = 0x5bc30000, .nr_zq = 2, .nr_dx = 2, },
+		},
+	},
+	{
+		.soc_id = UNIPHIER_LD6B_ID,
+		.nr_phy = 3,
+		.phy = {
+			{ .base = 0x5b830000, .nr_zq = 3, .nr_dx = 4, },
+			{ .base = 0x5ba30000, .nr_zq = 3, .nr_dx = 4, },
+			{ .base = 0x5bc30000, .nr_zq = 2, .nr_dx = 2, },
+		},
+	},
+};
+UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_ddrmphy_param, uniphier_ddrmphy_param)
+
+static void print_bdl(void __iomem *reg, int n)
+{
+	u32 val = readl(reg);
+	int i;
+
+	for (i = 0; i < n; i++)
+		printf(FS PRINTF_FORMAT, (val >> i * 8) & 0x1f);
+}
+
+static void dump_loop(const struct uniphier_ddrmphy_param *param,
+		      void (*callback)(void __iomem *))
+{
+	void __iomem *phy_base, *dx_base;
+	int phy, dx;
+
+	for (phy = 0; phy < param->nr_phy; phy++) {
+		phy_base = ioremap(param->phy[phy].base, SZ_4K);
+		dx_base = phy_base + MPHY_DX_BASE;
+
+		for (dx = 0; dx < param->phy[phy].nr_dx; dx++) {
+			printf("PHY%dDX%d:", phy, dx);
+			(*callback)(dx_base);
+			dx_base += MPHY_DX_STRIDE;
+			printf("\n");
+		}
+
+		iounmap(phy_base);
+	}
+}
+
+static void zq_dump(const struct uniphier_ddrmphy_param *param)
+{
+	void __iomem *phy_base, *zq_base;
+	u32 val;
+	int phy, zq, i;
+
+	printf("\n--- Impedance Data ---\n");
+	printf("           ZPD  ZPU  OPD  OPU  ZDV  ODV\n");
+
+	for (phy = 0; phy < param->nr_phy; phy++) {
+		phy_base = ioremap(param->phy[phy].base, SZ_4K);
+		zq_base = phy_base + MPHY_ZQ_BASE;
+
+		for (zq = 0; zq < param->phy[phy].nr_zq; zq++) {
+			printf("PHY%dZQ%d:", phy, zq);
+
+			val = readl(zq_base + MPHY_ZQ_DR);
+			for (i = 0; i < 4; i++) {
+				printf(FS PRINTF_FORMAT, val & 0x7f);
+				val >>= 7;
+			}
+
+			val = readl(zq_base + MPHY_ZQ_PR);
+			for (i = 0; i < 2; i++) {
+				printf(FS PRINTF_FORMAT, val & 0xf);
+				val >>= 4;
+			}
+
+			zq_base += MPHY_ZQ_STRIDE;
+			printf("\n");
+		}
+
+		iounmap(phy_base);
+	}
+}
+
+static void __wbdl_dump(void __iomem *dx_base)
+{
+	print_bdl(dx_base + MPHY_DX_BDLR0, 4);
+	print_bdl(dx_base + MPHY_DX_BDLR1, 4);
+	print_bdl(dx_base + MPHY_DX_BDLR2, 2);
+
+	printf(FS "(+" PRINTF_FORMAT ")",
+	       readl(dx_base + MPHY_DX_LCDLR1) & 0xff);
+}
+
+static void wbdl_dump(const struct uniphier_ddrmphy_param *param)
+{
+	printf("\n--- Write Bit Delay Line ---\n");
+	printf("           DQ0  DQ1  DQ2  DQ3  DQ4  DQ5  DQ6  DQ7   DM  DQS  (WDQD)\n");
+
+	dump_loop(param, &__wbdl_dump);
+}
+
+static void __rbdl_dump(void __iomem *dx_base)
+{
+	print_bdl(dx_base + MPHY_DX_BDLR3, 4);
+	print_bdl(dx_base + MPHY_DX_BDLR4, 4);
+	print_bdl(dx_base + MPHY_DX_BDLR5, 1);
+
+	printf(FS "(+" PRINTF_FORMAT ")",
+	       (readl(dx_base + MPHY_DX_LCDLR1) >> 8) & 0xff);
+
+	printf(FS "(+" PRINTF_FORMAT ")",
+	       (readl(dx_base + MPHY_DX_LCDLR1) >> 16) & 0xff);
+}
+
+static void rbdl_dump(const struct uniphier_ddrmphy_param *param)
+{
+	printf("\n--- Read Bit Delay Line ---\n");
+	printf("           DQ0  DQ1  DQ2  DQ3  DQ4  DQ5  DQ6  DQ7   DM  (RDQSD) (RDQSND)\n");
+
+	dump_loop(param, &__rbdl_dump);
+}
+
+static void __wld_dump(void __iomem *dx_base)
+{
+	int rank;
+	u32 lcdlr0 = readl(dx_base + MPHY_DX_LCDLR0);
+	u32 gtr = readl(dx_base + MPHY_DX_GTR);
+
+	for (rank = 0; rank < 4; rank++) {
+		u32 wld = (lcdlr0 >> (8 * rank)) & 0xff; /* Delay */
+		u32 wlsl = (gtr >> (12 + 2 * rank)) & 0x3; /* System Latency */
+
+		printf(FS PRINTF_FORMAT "%sT", wld,
+		       wlsl == 0 ? "-1" : wlsl == 1 ? "+0" : "+1");
+	}
+}
+
+static void wld_dump(const struct uniphier_ddrmphy_param *param)
+{
+	printf("\n--- Write Leveling Delay ---\n");
+	printf("           Rank0   Rank1   Rank2   Rank3\n");
+
+	dump_loop(param, &__wld_dump);
+}
+
+static void __dqsgd_dump(void __iomem *dx_base)
+{
+	int rank;
+	u32 lcdlr2 = readl(dx_base + MPHY_DX_LCDLR2);
+	u32 gtr = readl(dx_base + MPHY_DX_GTR);
+
+	for (rank = 0; rank < 4; rank++) {
+		u32 dqsgd = (lcdlr2 >> (8 * rank)) & 0xff; /* Delay */
+		u32 dgsl = (gtr >> (3 * rank)) & 0x7; /* System Latency */
+
+		printf(FS PRINTF_FORMAT "+%dT", dqsgd, dgsl);
+	}
+}
+
+static void dqsgd_dump(const struct uniphier_ddrmphy_param *param)
+{
+	printf("\n--- DQS Gating Delay ---\n");
+	printf("           Rank0   Rank1   Rank2   Rank3\n");
+
+	dump_loop(param, &__dqsgd_dump);
+}
+
+static void __mdl_dump(void __iomem *dx_base)
+{
+	int i;
+	u32 mdl = readl(dx_base + MPHY_DX_MDLR);
+
+	for (i = 0; i < 3; i++)
+		printf(FS PRINTF_FORMAT, (mdl >> (8 * i)) & 0xff);
+}
+
+static void mdl_dump(const struct uniphier_ddrmphy_param *param)
+{
+	printf("\n--- Master Delay Line ---\n");
+	printf("          IPRD TPRD MDLD\n");
+
+	dump_loop(param, &__mdl_dump);
+}
+
+#define REG_DUMP(x)							\
+	{ int ofst = MPHY_ ## x; void __iomem *reg = phy_base + ofst;	\
+		printf("%3d: %-10s: %p : %08x\n",			\
+		       ofst >> MPHY_SHIFT, #x, reg, readl(reg)); }
+
+#define DX_REG_DUMP(dx, x)						\
+	{ int ofst = MPHY_DX_BASE + MPHY_DX_STRIDE * (dx) +		\
+			MPHY_DX_## x;					\
+		void __iomem *reg = phy_base + ofst;			\
+		printf("%3d: DX%d%-7s: %p : %08x\n",			\
+		       ofst >> MPHY_SHIFT, (dx), #x, reg, readl(reg)); }
+
+static void reg_dump(const struct uniphier_ddrmphy_param *param)
+{
+	void __iomem *phy_base;
+	int phy, dx;
+
+	printf("\n--- DDR Multi PHY registers ---\n");
+
+	for (phy = 0; phy < param->nr_phy; phy++) {
+		phy_base = ioremap(param->phy[phy].base, SZ_4K);
+
+		printf("== PHY%d (base: %08x) ==\n", phy,
+		       ptr_to_uint(phy_base));
+		printf(" No: Name      : Address  : Data\n");
+
+		REG_DUMP(RIDR);
+		REG_DUMP(PIR);
+		REG_DUMP(PGCR0);
+		REG_DUMP(PGCR1);
+		REG_DUMP(PGCR2);
+		REG_DUMP(PGCR3);
+		REG_DUMP(PGSR0);
+		REG_DUMP(PGSR1);
+		REG_DUMP(PLLCR);
+		REG_DUMP(PTR0);
+		REG_DUMP(PTR1);
+		REG_DUMP(PTR2);
+		REG_DUMP(PTR3);
+		REG_DUMP(PTR4);
+		REG_DUMP(ACMDLR);
+		REG_DUMP(ACBDLR0);
+		REG_DUMP(DXCCR);
+		REG_DUMP(DSGCR);
+		REG_DUMP(DCR);
+		REG_DUMP(DTPR0);
+		REG_DUMP(DTPR1);
+		REG_DUMP(DTPR2);
+		REG_DUMP(DTPR3);
+		REG_DUMP(MR0);
+		REG_DUMP(MR1);
+		REG_DUMP(MR2);
+		REG_DUMP(MR3);
+
+		for (dx = 0; dx < param->phy[phy].nr_dx; dx++) {
+			DX_REG_DUMP(dx, GCR0);
+			DX_REG_DUMP(dx, GCR1);
+			DX_REG_DUMP(dx, GCR2);
+			DX_REG_DUMP(dx, GCR3);
+			DX_REG_DUMP(dx, GTR);
+		}
+
+		iounmap(phy_base);
+	}
+}
+
+static int do_ddrm(struct cmd_tbl *cmdtp, int flag, int argc,
+		   char *const argv[])
+{
+	const struct uniphier_ddrmphy_param *param;
+	char *cmd;
+
+	param = uniphier_get_ddrmphy_param();
+	if (!param) {
+		pr_err("unsupported SoC\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if (argc == 1)
+		cmd = "all";
+	else
+		cmd = argv[1];
+
+	if (!strcmp(cmd, "zq") || !strcmp(cmd, "all"))
+		zq_dump(param);
+
+	if (!strcmp(cmd, "wbdl") || !strcmp(cmd, "all"))
+		wbdl_dump(param);
+
+	if (!strcmp(cmd, "rbdl") || !strcmp(cmd, "all"))
+		rbdl_dump(param);
+
+	if (!strcmp(cmd, "wld") || !strcmp(cmd, "all"))
+		wld_dump(param);
+
+	if (!strcmp(cmd, "dqsgd") || !strcmp(cmd, "all"))
+		dqsgd_dump(param);
+
+	if (!strcmp(cmd, "mdl") || !strcmp(cmd, "all"))
+		mdl_dump(param);
+
+	if (!strcmp(cmd, "reg") || !strcmp(cmd, "all"))
+		reg_dump(param);
+
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	ddrm,	2,	1,	do_ddrm,
+	"UniPhier DDR Multi PHY parameters dumper",
+	"- dump all of the following\n"
+	"ddrm zq - dump Impedance Data\n"
+	"ddrm wbdl - dump Write Bit Delay\n"
+	"ddrm rbdl - dump Read Bit Delay\n"
+	"ddrm wld - dump Write Leveling\n"
+	"ddrm dqsgd - dump DQS Gating Delay\n"
+	"ddrm mdl - dump Master Delay Line\n"
+	"ddrm reg - dump registers\n"
+);
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/cmd_ddrphy.c b/roms/u-boot/arch/arm/mach-uniphier/dram/cmd_ddrphy.c
new file mode 100644
index 000000000..ca519d1c7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/cmd_ddrphy.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014      Panasonic Corporation
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <command.h>
+#include <stdio.h>
+#include <linux/io.h>
+#include <linux/printk.h>
+#include <linux/sizes.h>
+
+#include "../soc-info.h"
+#include "ddrphy-regs.h"
+
+/* Select either decimal or hexadecimal */
+#if 1
+#define PRINTF_FORMAT "%2d"
+#else
+#define PRINTF_FORMAT "%02x"
+#endif
+/* field separator */
+#define FS "   "
+
+#define ptr_to_uint(p)	((unsigned int)(unsigned long)(p))
+
+#define UNIPHIER_MAX_NR_DDRPHY		4
+
+struct uniphier_ddrphy_param {
+	unsigned int soc_id;
+	unsigned int nr_phy;
+	struct {
+		resource_size_t base;
+		unsigned int nr_dx;
+	} phy[UNIPHIER_MAX_NR_DDRPHY];
+};
+
+static const struct uniphier_ddrphy_param uniphier_ddrphy_param[] = {
+	{
+		.soc_id = UNIPHIER_LD4_ID,
+		.nr_phy = 2,
+		.phy = {
+			{ .base = 0x5bc01000, .nr_dx = 2, },
+			{ .base = 0x5be01000, .nr_dx = 2, },
+		},
+	},
+	{
+		.soc_id = UNIPHIER_PRO4_ID,
+		.nr_phy = 4,
+		.phy = {
+			{ .base = 0x5bc01000, .nr_dx = 2, },
+			{ .base = 0x5bc02000, .nr_dx = 2, },
+			{ .base = 0x5be01000, .nr_dx = 2, },
+			{ .base = 0x5be02000, .nr_dx = 2, },
+		},
+	},
+	{
+		.soc_id = UNIPHIER_SLD8_ID,
+		.nr_phy = 2,
+		.phy = {
+			{ .base = 0x5bc01000, .nr_dx = 2, },
+			{ .base = 0x5be01000, .nr_dx = 2, },
+		},
+	},
+	{
+		.soc_id = UNIPHIER_LD11_ID,
+		.nr_phy = 1,
+		.phy = {
+			{ .base = 0x5bc01000, .nr_dx = 4, },
+		},
+	},
+};
+UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_ddrphy_param, uniphier_ddrphy_param)
+
+static void print_bdl(void __iomem *reg, int n)
+{
+	u32 val = readl(reg);
+	int i;
+
+	for (i = 0; i < n; i++)
+		printf(FS PRINTF_FORMAT, (val >> i * 6) & 0x3f);
+}
+
+static void dump_loop(const struct uniphier_ddrphy_param *param,
+		      void (*callback)(void __iomem *))
+{
+	void __iomem *phy_base, *dx_base;
+	int phy, dx;
+
+	for (phy = 0; phy < param->nr_phy; phy++) {
+		phy_base = ioremap(param->phy[phy].base, SZ_4K);
+		dx_base = phy_base + PHY_DX_BASE;
+
+		for (dx = 0; dx < param->phy[phy].nr_dx; dx++) {
+			printf("PHY%dDX%d:", phy, dx);
+			(*callback)(dx_base);
+			dx_base += PHY_DX_STRIDE;
+			printf("\n");
+		}
+
+		iounmap(phy_base);
+	}
+}
+
+static void __wbdl_dump(void __iomem *dx_base)
+{
+	print_bdl(dx_base + PHY_DX_BDLR0, 5);
+	print_bdl(dx_base + PHY_DX_BDLR1, 5);
+
+	printf(FS "(+" PRINTF_FORMAT ")",
+	       readl(dx_base + PHY_DX_LCDLR1) & 0xff);
+}
+
+static void wbdl_dump(const struct uniphier_ddrphy_param *param)
+{
+	printf("\n--- Write Bit Delay Line ---\n");
+	printf("           DQ0  DQ1  DQ2  DQ3  DQ4  DQ5  DQ6  DQ7   DM  DQS  (WDQD)\n");
+
+	dump_loop(param, &__wbdl_dump);
+}
+
+static void __rbdl_dump(void __iomem *dx_base)
+{
+	print_bdl(dx_base + PHY_DX_BDLR3, 5);
+	print_bdl(dx_base + PHY_DX_BDLR4, 4);
+
+	printf(FS "(+" PRINTF_FORMAT ")",
+	       (readl(dx_base + PHY_DX_LCDLR1) >> 8) & 0xff);
+}
+
+static void rbdl_dump(const struct uniphier_ddrphy_param *param)
+{
+	printf("\n--- Read Bit Delay Line ---\n");
+	printf("           DQ0  DQ1  DQ2  DQ3  DQ4  DQ5  DQ6  DQ7   DM  (RDQSD)\n");
+
+	dump_loop(param, &__rbdl_dump);
+}
+
+static void __wld_dump(void __iomem *dx_base)
+{
+	int rank;
+	u32 lcdlr0 = readl(dx_base + PHY_DX_LCDLR0);
+	u32 gtr = readl(dx_base + PHY_DX_GTR);
+
+	for (rank = 0; rank < 4; rank++) {
+		u32 wld = (lcdlr0 >> (8 * rank)) & 0xff; /* Delay */
+		u32 wlsl = (gtr >> (12 + 2 * rank)) & 0x3; /* System Latency */
+
+		printf(FS PRINTF_FORMAT "%sT", wld,
+		       wlsl == 0 ? "-1" : wlsl == 1 ? "+0" : "+1");
+	}
+}
+
+static void wld_dump(const struct uniphier_ddrphy_param *param)
+{
+	printf("\n--- Write Leveling Delay ---\n");
+	printf("           Rank0   Rank1   Rank2   Rank3\n");
+
+	dump_loop(param, &__wld_dump);
+}
+
+static void __dqsgd_dump(void __iomem *dx_base)
+{
+	int rank;
+	u32 lcdlr2 = readl(dx_base + PHY_DX_LCDLR2);
+	u32 gtr = readl(dx_base + PHY_DX_GTR);
+
+	for (rank = 0; rank < 4; rank++) {
+		u32 dqsgd = (lcdlr2 >> (8 * rank)) & 0xff; /* Delay */
+		u32 dgsl = (gtr >> (3 * rank)) & 0x7; /* System Latency */
+
+		printf(FS PRINTF_FORMAT "+%dT", dqsgd, dgsl);
+	}
+}
+
+static void dqsgd_dump(const struct uniphier_ddrphy_param *param)
+{
+	printf("\n--- DQS Gating Delay ---\n");
+	printf("           Rank0   Rank1   Rank2   Rank3\n");
+
+	dump_loop(param, &__dqsgd_dump);
+}
+
+static void __mdl_dump(void __iomem *dx_base)
+{
+	int i;
+	u32 mdl = readl(dx_base + PHY_DX_MDLR);
+
+	for (i = 0; i < 3; i++)
+		printf(FS PRINTF_FORMAT, (mdl >> (8 * i)) & 0xff);
+}
+
+static void mdl_dump(const struct uniphier_ddrphy_param *param)
+{
+	printf("\n--- Master Delay Line ---\n");
+	printf("          IPRD TPRD MDLD\n");
+
+	dump_loop(param, &__mdl_dump);
+}
+
+#define REG_DUMP(x)							\
+	{ int ofst = PHY_ ## x; void __iomem *reg = phy_base + ofst;	\
+		printf("%3d: %-10s: %08x : %08x\n",			\
+		       ofst >> PHY_REG_SHIFT, #x,			\
+		       ptr_to_uint(reg), readl(reg)); }
+
+#define DX_REG_DUMP(dx, x)						\
+	{ int ofst = PHY_DX_BASE + PHY_DX_STRIDE * (dx) +		\
+			PHY_DX_## x;					\
+		void __iomem *reg = phy_base + ofst;			\
+		printf("%3d: DX%d%-7s: %08x : %08x\n",			\
+		       ofst >> PHY_REG_SHIFT, (dx), #x,			\
+		       ptr_to_uint(reg), readl(reg)); }
+
+static void reg_dump(const struct uniphier_ddrphy_param *param)
+{
+	void __iomem *phy_base;
+	int phy, dx;
+
+	printf("\n--- DDR PHY registers ---\n");
+
+	for (phy = 0; phy < param->nr_phy; phy++) {
+		phy_base = ioremap(param->phy[phy].base, SZ_4K);
+
+		printf("== PHY%d (base: %08x) ==\n",
+		       phy, ptr_to_uint(phy_base));
+		printf(" No: Name      : Address  : Data\n");
+
+		REG_DUMP(RIDR);
+		REG_DUMP(PIR);
+		REG_DUMP(PGCR0);
+		REG_DUMP(PGCR1);
+		REG_DUMP(PGSR0);
+		REG_DUMP(PGSR1);
+		REG_DUMP(PLLCR);
+		REG_DUMP(PTR0);
+		REG_DUMP(PTR1);
+		REG_DUMP(PTR2);
+		REG_DUMP(PTR3);
+		REG_DUMP(PTR4);
+		REG_DUMP(ACMDLR);
+		REG_DUMP(ACBDLR);
+		REG_DUMP(DXCCR);
+		REG_DUMP(DSGCR);
+		REG_DUMP(DCR);
+		REG_DUMP(DTPR0);
+		REG_DUMP(DTPR1);
+		REG_DUMP(DTPR2);
+		REG_DUMP(MR0);
+		REG_DUMP(MR1);
+		REG_DUMP(MR2);
+		REG_DUMP(MR3);
+
+		for (dx = 0; dx < param->phy[phy].nr_dx; dx++) {
+			DX_REG_DUMP(dx, GCR);
+			DX_REG_DUMP(dx, GTR);
+		}
+
+		iounmap(phy_base);
+	}
+}
+
+static int do_ddr(struct cmd_tbl *cmdtp, int flag, int argc,
+		  char *const argv[])
+{
+	const struct uniphier_ddrphy_param *param;
+	char *cmd;
+
+	param = uniphier_get_ddrphy_param();
+	if (!param) {
+		pr_err("unsupported SoC\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if (argc == 1)
+		cmd = "all";
+	else
+		cmd = argv[1];
+
+	if (!strcmp(cmd, "wbdl") || !strcmp(cmd, "all"))
+		wbdl_dump(param);
+
+	if (!strcmp(cmd, "rbdl") || !strcmp(cmd, "all"))
+		rbdl_dump(param);
+
+	if (!strcmp(cmd, "wld") || !strcmp(cmd, "all"))
+		wld_dump(param);
+
+	if (!strcmp(cmd, "dqsgd") || !strcmp(cmd, "all"))
+		dqsgd_dump(param);
+
+	if (!strcmp(cmd, "mdl") || !strcmp(cmd, "all"))
+		mdl_dump(param);
+
+	if (!strcmp(cmd, "reg") || !strcmp(cmd, "all"))
+		reg_dump(param);
+
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	ddr,	2,	1,	do_ddr,
+	"UniPhier DDR PHY parameters dumper",
+	"- dump all of the following\n"
+	"ddr wbdl - dump Write Bit Delay\n"
+	"ddr rbdl - dump Read Bit Delay\n"
+	"ddr wld - dump Write Leveling\n"
+	"ddr dqsgd - dump DQS Gating Delay\n"
+	"ddr mdl - dump Master Delay Line\n"
+	"ddr reg - dump registers\n"
+);
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/ddrmphy-regs.h b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrmphy-regs.h
new file mode 100644
index 000000000..96bab9de5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrmphy-regs.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UniPhier DDR MultiPHY registers
+ *
+ * Copyright (C) 2015-2017 Socionext Inc.
+ */
+
+#ifndef UNIPHIER_DDRMPHY_REGS_H
+#define UNIPHIER_DDRMPHY_REGS_H
+
+#include <linux/bitops.h>
+
+#define MPHY_SHIFT			2
+
+#define MPHY_RIDR		(0x000 << MPHY_SHIFT)
+#define MPHY_PIR		(0x001 << MPHY_SHIFT)
+#define   MPHY_PIR_INIT			BIT(0)	/* Initialization Trigger */
+#define   MPHY_PIR_ZCAL			BIT(1)	/* Impedance Calibration */
+#define   MPHY_PIR_PLLINIT		BIT(4)	/* PLL Initialization */
+#define   MPHY_PIR_DCAL			BIT(5)	/* DDL Calibration */
+#define   MPHY_PIR_PHYRST		BIT(6)	/* PHY Reset */
+#define   MPHY_PIR_DRAMRST		BIT(7)	/* DRAM Reset */
+#define   MPHY_PIR_DRAMINIT		BIT(8)	/* DRAM Initialization */
+#define   MPHY_PIR_WL			BIT(9)	/* Write Leveling */
+#define   MPHY_PIR_QSGATE		BIT(10)	/* Read DQS Gate Training */
+#define   MPHY_PIR_WLADJ		BIT(11)	/* Write Leveling Adjust */
+#define   MPHY_PIR_RDDSKW		BIT(12)	/* Read Data Bit Deskew */
+#define   MPHY_PIR_WRDSKW		BIT(13)	/* Write Data Bit Deskew */
+#define   MPHY_PIR_RDEYE		BIT(14)	/* Read Data Eye Training */
+#define   MPHY_PIR_WREYE		BIT(15)	/* Write Data Eye Training */
+#define   MPHY_PIR_ZCALBYP		BIT(30)	/* Impedance Calib Bypass */
+#define   MPHY_PIR_INITBYP		BIT(31)	/* Initialization Bypass */
+#define MPHY_PGCR0		(0x002 << MPHY_SHIFT)
+#define   MPHY_PGCR0_PHYFRST		BIT(26)	/* PHY FIFO Reset */
+#define MPHY_PGCR1		(0x003 << MPHY_SHIFT)
+#define   MPHY_PGCR1_INHVT		BIT(26)	/* VT Calculation Inhibit */
+#define MPHY_PGCR2		(0x004 << MPHY_SHIFT)
+#define   MPHY_PGCR2_DUALCHN		BIT(28)	/* Dual Channel Configuration*/
+#define   MPHY_PGCR2_ACPDDC		BIT(29)	/* AC Power-Down with Dual Ch*/
+#define MPHY_PGCR3		(0x005 << MPHY_SHIFT)
+#define MPHY_PGSR0		(0x006 << MPHY_SHIFT)
+#define   MPHY_PGSR0_IDONE		BIT(0)	/* Initialization Done */
+#define   MPHY_PGSR0_PLDONE		BIT(1)	/* PLL Lock Done */
+#define   MPHY_PGSR0_DCDONE		BIT(2)	/* DDL Calibration Done */
+#define   MPHY_PGSR0_ZCDONE		BIT(3)	/* Impedance Calibration Done */
+#define   MPHY_PGSR0_DIDONE		BIT(4)	/* DRAM Initialization Done */
+#define   MPHY_PGSR0_WLDONE		BIT(5)	/* Write Leveling Done */
+#define   MPHY_PGSR0_QSGDONE		BIT(6)	/* DQS Gate Training Done */
+#define   MPHY_PGSR0_WLADONE		BIT(7)	/* Write Leveling Adjust Done */
+#define   MPHY_PGSR0_RDDONE		BIT(8)	/* Read Bit Deskew Done */
+#define   MPHY_PGSR0_WDDONE		BIT(9)	/* Write Bit Deskew Done */
+#define   MPHY_PGSR0_REDONE		BIT(10)	/* Read Eye Training Done */
+#define   MPHY_PGSR0_WEDONE		BIT(11)	/* Write Eye Training Done */
+#define   MPHY_PGSR0_ZCERR		BIT(20)	/* Impedance Calib Error */
+#define   MPHY_PGSR0_WLERR		BIT(21)	/* Write Leveling Error */
+#define   MPHY_PGSR0_QSGERR		BIT(22)	/* DQS Gate Training Error */
+#define   MPHY_PGSR0_WLAERR		BIT(23)	/* Write Leveling Adj Error */
+#define   MPHY_PGSR0_RDERR		BIT(24)	/* Read Bit Deskew Error */
+#define   MPHY_PGSR0_WDERR		BIT(25)	/* Write Bit Deskew Error */
+#define   MPHY_PGSR0_REERR		BIT(26)	/* Read Eye Training Error */
+#define   MPHY_PGSR0_WEERR		BIT(27)	/* Write Eye Training Error */
+#define MPHY_PGSR1		(0x007 << MPHY_SHIFT)
+#define   MPHY_PGSR1_VTSTOP		BIT(30)	/* VT Stop */
+#define MPHY_PLLCR		(0x008 << MPHY_SHIFT)
+#define MPHY_PTR0		(0x009 << MPHY_SHIFT)
+#define MPHY_PTR1		(0x00A << MPHY_SHIFT)
+#define MPHY_PTR2		(0x00B << MPHY_SHIFT)
+#define MPHY_PTR3		(0x00C << MPHY_SHIFT)
+#define MPHY_PTR4		(0x00D << MPHY_SHIFT)
+#define MPHY_ACMDLR		(0x00E << MPHY_SHIFT)
+#define MPHY_ACLCDLR		(0x00F << MPHY_SHIFT)
+#define MPHY_ACBDLR0		(0x010 << MPHY_SHIFT)
+#define MPHY_ACBDLR1		(0x011 << MPHY_SHIFT)
+#define MPHY_ACBDLR2		(0x012 << MPHY_SHIFT)
+#define MPHY_ACBDLR3		(0x013 << MPHY_SHIFT)
+#define MPHY_ACBDLR4		(0x014 << MPHY_SHIFT)
+#define MPHY_ACBDLR5		(0x015 << MPHY_SHIFT)
+#define MPHY_ACBDLR6		(0x016 << MPHY_SHIFT)
+#define MPHY_ACBDLR7		(0x017 << MPHY_SHIFT)
+#define MPHY_ACBDLR8		(0x018 << MPHY_SHIFT)
+#define MPHY_ACBDLR9		(0x019 << MPHY_SHIFT)
+#define MPHY_ACIOCR0		(0x01A << MPHY_SHIFT)
+#define MPHY_ACIOCR1		(0x01B << MPHY_SHIFT)
+#define MPHY_ACIOCR2		(0x01C << MPHY_SHIFT)
+#define MPHY_ACIOCR3		(0x01D << MPHY_SHIFT)
+#define MPHY_ACIOCR4		(0x01E << MPHY_SHIFT)
+#define MPHY_ACIOCR5		(0x01F << MPHY_SHIFT)
+#define MPHY_DXCCR		(0x020 << MPHY_SHIFT)
+#define MPHY_DSGCR		(0x021 << MPHY_SHIFT)
+#define MPHY_DCR		(0x022 << MPHY_SHIFT)
+#define MPHY_DTPR0		(0x023 << MPHY_SHIFT)
+#define MPHY_DTPR1		(0x024 << MPHY_SHIFT)
+#define MPHY_DTPR2		(0x025 << MPHY_SHIFT)
+#define MPHY_DTPR3		(0x026 << MPHY_SHIFT)
+#define MPHY_MR0		(0x027 << MPHY_SHIFT)
+#define MPHY_MR1		(0x028 << MPHY_SHIFT)
+#define MPHY_MR2		(0x029 << MPHY_SHIFT)
+#define MPHY_MR3		(0x02A << MPHY_SHIFT)
+#define MPHY_ODTCR		(0x02B << MPHY_SHIFT)
+#define MPHY_DTCR		(0x02C << MPHY_SHIFT)
+#define   MPHY_DTCR_RANKEN_SHIFT	24	/* Rank Enable */
+#define   MPHY_DTCR_RANKEN_MASK		(0xf << (MPHY_DTCR_RANKEN_SHIFT))
+#define MPHY_DTAR0		(0x02D << MPHY_SHIFT)
+#define MPHY_DTAR1		(0x02E << MPHY_SHIFT)
+#define MPHY_DTAR2		(0x02F << MPHY_SHIFT)
+#define MPHY_DTAR3		(0x030 << MPHY_SHIFT)
+#define MPHY_DTDR0		(0x031 << MPHY_SHIFT)
+#define MPHY_DTDR1		(0x032 << MPHY_SHIFT)
+#define MPHY_DTEDR0		(0x033 << MPHY_SHIFT)
+#define MPHY_DTEDR1		(0x034 << MPHY_SHIFT)
+#define MPHY_ZQCR		(0x090 << MPHY_SHIFT)
+#define   MPHY_ZQCR_AVGEN			BIT(16)	/* Average Algorithm */
+#define   MPHY_ZQCR_FORCE_ZCAL_VT_UPDATE	BIT(27)	/* force VT update */
+/* ZQ */
+#define MPHY_ZQ_BASE		(0x091 << MPHY_SHIFT)
+#define MPHY_ZQ_STRIDE		(0x004 << MPHY_SHIFT)
+#define MPHY_ZQ_PR		(0x000 << MPHY_SHIFT)
+#define MPHY_ZQ_DR		(0x001 << MPHY_SHIFT)
+#define MPHY_ZQ_SR		(0x002 << MPHY_SHIFT)
+/* DATX8 */
+#define MPHY_DX_BASE		(0x0A0 << MPHY_SHIFT)
+#define MPHY_DX_STRIDE		(0x020 << MPHY_SHIFT)
+#define MPHY_DX_GCR0		(0x000 << MPHY_SHIFT)
+#define   MPHY_DX_GCR0_WLRKEN_SHIFT	26	/* Write Level Rank Enable */
+#define   MPHY_DX_GCR0_WLRKEN_MASK	(0xf << (MPHY_DX_GCR0_WLRKEN_SHIFT))
+#define MPHY_DX_GCR1		(0x001 << MPHY_SHIFT)
+#define MPHY_DX_GCR2		(0x002 << MPHY_SHIFT)
+#define MPHY_DX_GCR3		(0x003 << MPHY_SHIFT)
+#define MPHY_DX_GSR0		(0x004 << MPHY_SHIFT)
+#define MPHY_DX_GSR1		(0x005 << MPHY_SHIFT)
+#define MPHY_DX_GSR2		(0x006 << MPHY_SHIFT)
+#define MPHY_DX_BDLR0		(0x007 << MPHY_SHIFT)
+#define MPHY_DX_BDLR1		(0x008 << MPHY_SHIFT)
+#define MPHY_DX_BDLR2		(0x009 << MPHY_SHIFT)
+#define MPHY_DX_BDLR3		(0x00A << MPHY_SHIFT)
+#define MPHY_DX_BDLR4		(0x00B << MPHY_SHIFT)
+#define MPHY_DX_BDLR5		(0x00C << MPHY_SHIFT)
+#define MPHY_DX_BDLR6		(0x00D << MPHY_SHIFT)
+#define MPHY_DX_LCDLR0		(0x00E << MPHY_SHIFT)
+#define MPHY_DX_LCDLR1		(0x00F << MPHY_SHIFT)
+#define MPHY_DX_LCDLR2		(0x010 << MPHY_SHIFT)
+#define MPHY_DX_MDLR		(0x011 << MPHY_SHIFT)
+#define MPHY_DX_GTR		(0x012 << MPHY_SHIFT)
+
+#endif /* UNIPHIER_DDRMPHY_REGS_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-init.h b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-init.h
new file mode 100644
index 000000000..09981f6e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-init.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ */
+
+#ifndef ARCH_DDRPHY_INIT_H
+#define ARCH_DDRPHY_INTT_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+int uniphier_ld4_ddrphy_init(void __iomem *phy_base, int freq, bool ddr3plus);
+void ddrphy_prepare_training(void __iomem *phy_base, int rank);
+int ddrphy_training(void __iomem *phy_base);
+
+#endif /* ARCH_DDRPHY_INT_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-ld4.c
new file mode 100644
index 000000000..26f3ba9d5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-ld4.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014      Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/printk.h>
+
+#include "ddrphy-init.h"
+#include "ddrphy-regs.h"
+
+enum dram_freq {
+	DRAM_FREQ_1333M,
+	DRAM_FREQ_1600M,
+	DRAM_FREQ_NR,
+};
+
+static u32 ddrphy_ptr0[DRAM_FREQ_NR] = {0x0a806844, 0x0c807d04};
+static u32 ddrphy_ptr1[DRAM_FREQ_NR] = {0x208e0124, 0x2710015E};
+static u32 ddrphy_ptr3[DRAM_FREQ_NR] = {0x0f051616, 0x12061A80};
+static u32 ddrphy_ptr4[DRAM_FREQ_NR] = {0x06ae08d6, 0x08027100};
+static u32 ddrphy_dtpr0[DRAM_FREQ_NR] = {0x85589955, 0x999cbb66};
+static u32 ddrphy_dtpr1[DRAM_FREQ_NR] = {0x1a8363c0, 0x1a878400};
+static u32 ddrphy_dtpr2[DRAM_FREQ_NR] = {0x5002c200, 0xa00214f8};
+static u32 ddrphy_mr0[DRAM_FREQ_NR] = {0x00000b51, 0x00000d71};
+static u32 ddrphy_mr2[DRAM_FREQ_NR] = {0x00000290, 0x00000298};
+
+int uniphier_ld4_ddrphy_init(void __iomem *phy_base, int freq, bool ddr3plus)
+{
+	enum dram_freq freq_e;
+	u32 tmp;
+
+	switch (freq) {
+	case 1333:
+		freq_e = DRAM_FREQ_1333M;
+		break;
+	case 1600:
+		freq_e = DRAM_FREQ_1600M;
+		break;
+	default:
+		pr_err("unsupported DRAM frequency %d MHz\n", freq);
+		return -EINVAL;
+	}
+
+	writel(0x0300c473, phy_base + PHY_PGCR1);
+	writel(ddrphy_ptr0[freq_e], phy_base + PHY_PTR0);
+	writel(ddrphy_ptr1[freq_e], phy_base + PHY_PTR1);
+	writel(0x00083DEF, phy_base + PHY_PTR2);
+	writel(ddrphy_ptr3[freq_e], phy_base + PHY_PTR3);
+	writel(ddrphy_ptr4[freq_e], phy_base + PHY_PTR4);
+	writel(0xF004001A, phy_base + PHY_DSGCR);
+
+	/* change the value of the on-die pull-up/pull-down registors */
+	tmp = readl(phy_base + PHY_DXCCR);
+	tmp &= ~0x0ee0;
+	tmp |= PHY_DXCCR_DQSNRES_688_OHM | PHY_DXCCR_DQSRES_688_OHM;
+	writel(tmp, phy_base + PHY_DXCCR);
+
+	writel(0x0000040B, phy_base + PHY_DCR);
+	writel(ddrphy_dtpr0[freq_e], phy_base + PHY_DTPR0);
+	writel(ddrphy_dtpr1[freq_e], phy_base + PHY_DTPR1);
+	writel(ddrphy_dtpr2[freq_e], phy_base + PHY_DTPR2);
+	writel(ddrphy_mr0[freq_e], phy_base + PHY_MR0);
+	writel(0x00000006, phy_base + PHY_MR1);
+	writel(ddrphy_mr2[freq_e], phy_base + PHY_MR2);
+	writel(ddr3plus ? 0x00000800 : 0x00000000, phy_base + PHY_MR3);
+
+	while (!(readl(phy_base + PHY_PGSR0) & PHY_PGSR0_IDONE))
+		;
+
+	writel(0x0300C473, phy_base + PHY_PGCR1);
+	writel(0x0000005D, phy_base + PHY_ZQ_BASE + PHY_ZQ_CR1);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-regs.h b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-regs.h
new file mode 100644
index 000000000..8b342921b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-regs.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UniPhier DDR PHY registers
+ *
+ * Copyright (C) 2014      Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ */
+
+#ifndef ARCH_DDRPHY_REGS_H
+#define ARCH_DDRPHY_REGS_H
+
+#include <linux/bitops.h>
+#define PHY_REG_SHIFT		2
+
+#define PHY_RIDR		(0x000 << PHY_REG_SHIFT)
+#define PHY_PIR			(0x001 << PHY_REG_SHIFT)
+#define   PHY_PIR_INIT			BIT(0)	/* Initialization Trigger */
+#define   PHY_PIR_ZCAL			BIT(1)	/* Impedance Calibration */
+#define   PHY_PIR_PLLINIT		BIT(4)	/* PLL Initialization */
+#define   PHY_PIR_DCAL			BIT(5)	/* DDL Calibration */
+#define   PHY_PIR_PHYRST		BIT(6)	/* PHY Reset */
+#define   PHY_PIR_DRAMRST		BIT(7)	/* DRAM Reset */
+#define   PHY_PIR_DRAMINIT		BIT(8)	/* DRAM Initialization */
+#define   PHY_PIR_WL			BIT(9)	/* Write Leveling */
+#define   PHY_PIR_QSGATE		BIT(10)	/* Read DQS Gate Training */
+#define   PHY_PIR_WLADJ			BIT(11)	/* Write Leveling Adjust */
+#define   PHY_PIR_RDDSKW		BIT(12)	/* Read Data Bit Deskew */
+#define   PHY_PIR_WRDSKW		BIT(13)	/* Write Data Bit Deskew */
+#define   PHY_PIR_RDEYE			BIT(14)	/* Read Data Eye Training */
+#define   PHY_PIR_WREYE			BIT(15)	/* Write Data Eye Training */
+#define   PHY_PIR_LOCKBYP		BIT(28)	/* PLL Lock Bypass */
+#define   PHY_PIR_DCALBYP		BIT(29)	/* DDL Calibration Bypass */
+#define   PHY_PIR_ZCALBYP		BIT(30)	/* Impedance Calib Bypass */
+#define   PHY_PIR_INITBYP		BIT(31)	/* Initialization Bypass */
+#define PHY_PGCR0		(0x002 << PHY_REG_SHIFT)
+#define PHY_PGCR1		(0x003 << PHY_REG_SHIFT)
+#define   PHY_PGCR1_INHVT		BIT(26)	/* VT Calculation Inhibit */
+#define PHY_PGSR0		(0x004 << PHY_REG_SHIFT)
+#define   PHY_PGSR0_IDONE		BIT(0)	/* Initialization Done */
+#define   PHY_PGSR0_PLDONE		BIT(1)	/* PLL Lock Done */
+#define   PHY_PGSR0_DCDONE		BIT(2)	/* DDL Calibration Done */
+#define   PHY_PGSR0_ZCDONE		BIT(3)	/* Impedance Calibration Done */
+#define   PHY_PGSR0_DIDONE		BIT(4)	/* DRAM Initialization Done */
+#define   PHY_PGSR0_WLDONE		BIT(5)	/* Write Leveling Done */
+#define   PHY_PGSR0_QSGDONE		BIT(6)	/* DQS Gate Training Done */
+#define   PHY_PGSR0_WLADONE		BIT(7)	/* Write Leveling Adjust Done */
+#define   PHY_PGSR0_RDDONE		BIT(8)	/* Read Bit Deskew Done */
+#define   PHY_PGSR0_WDDONE		BIT(9)	/* Write Bit Deskew Done */
+#define   PHY_PGSR0_REDONE		BIT(10)	/* Read Eye Training Done */
+#define   PHY_PGSR0_WEDONE		BIT(11)	/* Write Eye Training Done */
+#define   PHY_PGSR0_DIERR		BIT(20)	/* DRAM Initialization Error */
+#define   PHY_PGSR0_WLERR		BIT(21)	/* Write Leveling Error */
+#define   PHY_PGSR0_QSGERR		BIT(22)	/* DQS Gate Training Error */
+#define   PHY_PGSR0_WLAERR		BIT(23)	/* Write Leveling Adj Error */
+#define   PHY_PGSR0_RDERR		BIT(24)	/* Read Bit Deskew Error */
+#define   PHY_PGSR0_WDERR		BIT(25)	/* Write Bit Deskew Error */
+#define   PHY_PGSR0_REERR		BIT(26)	/* Read Eye Training Error */
+#define   PHY_PGSR0_WEERR		BIT(27)	/* Write Eye Training Error */
+#define   PHY_PGSR0_DTERR_SHIFT		28	/* Data Training Error Status*/
+#define   PHY_PGSR0_DTERR		(7 << (PHY_PGSR0_DTERR_SHIFT))
+#define PHY_PGSR1		(0x005 << PHY_REG_SHIFT)
+#define   PHY_PGSR1_VTSTOP		BIT(30)	/* VT Stop (v3-) */
+#define PHY_PLLCR		(0x006 << PHY_REG_SHIFT)
+#define PHY_PTR0		(0x007 << PHY_REG_SHIFT)
+#define PHY_PTR1		(0x008 << PHY_REG_SHIFT)
+#define PHY_PTR2		(0x009 << PHY_REG_SHIFT)
+#define PHY_PTR3		(0x00A << PHY_REG_SHIFT)
+#define PHY_PTR4		(0x00B << PHY_REG_SHIFT)
+#define PHY_ACMDLR		(0x00C << PHY_REG_SHIFT)
+#define PHY_ACBDLR		(0x00D << PHY_REG_SHIFT)
+#define PHY_ACIOCR		(0x00E << PHY_REG_SHIFT)
+#define PHY_DXCCR		(0x00F << PHY_REG_SHIFT)
+#define   PHY_DXCCR_DQSRES_OPEN		(0 << 5)
+#define   PHY_DXCCR_DQSRES_688_OHM	(1 << 5)
+#define   PHY_DXCCR_DQSRES_611_OHM	(2 << 5)
+#define   PHY_DXCCR_DQSRES_550_OHM	(3 << 5)
+#define   PHY_DXCCR_DQSRES_500_OHM	(4 << 5)
+#define   PHY_DXCCR_DQSRES_458_OHM	(5 << 5)
+#define   PHY_DXCCR_DQSRES_393_OHM	(6 << 5)
+#define   PHY_DXCCR_DQSRES_344_OHM	(7 << 5)
+#define   PHY_DXCCR_DQSNRES_OPEN	(0 << 9)
+#define   PHY_DXCCR_DQSNRES_688_OHM	(1 << 9)
+#define   PHY_DXCCR_DQSNRES_611_OHM	(2 << 9)
+#define   PHY_DXCCR_DQSNRES_550_OHM	(3 << 9)
+#define   PHY_DXCCR_DQSNRES_500_OHM	(4 << 9)
+#define   PHY_DXCCR_DQSNRES_458_OHM	(5 << 9)
+#define   PHY_DXCCR_DQSNRES_393_OHM	(6 << 9)
+#define   PHY_DXCCR_DQSNRES_344_OHM	(7 << 9)
+#define PHY_DSGCR		(0x010 << PHY_REG_SHIFT)
+#define PHY_DCR			(0x011 << PHY_REG_SHIFT)
+#define PHY_DTPR0		(0x012 << PHY_REG_SHIFT)
+#define PHY_DTPR1		(0x013 << PHY_REG_SHIFT)
+#define PHY_DTPR2		(0x014 << PHY_REG_SHIFT)
+#define PHY_MR0			(0x015 << PHY_REG_SHIFT)
+#define PHY_MR1			(0x016 << PHY_REG_SHIFT)
+#define PHY_MR2			(0x017 << PHY_REG_SHIFT)
+#define PHY_MR3			(0x018 << PHY_REG_SHIFT)
+#define PHY_ODTCR		(0x019 << PHY_REG_SHIFT)
+#define PHY_DTCR		(0x01A << PHY_REG_SHIFT)
+#define   PHY_DTCR_DTRANK_SHIFT		4	/* Data Training Rank */
+#define   PHY_DTCR_DTRANK_MASK		(0x3 << (PHY_DTCR_DTRANK_SHIFT))
+#define   PHY_DTCR_DTMPR		BIT(6)	/* Data Training using MPR */
+#define   PHY_DTCR_RANKEN_SHIFT		24	/* Rank Enable */
+#define   PHY_DTCR_RANKEN_MASK		(0xf << (PHY_DTCR_RANKEN_SHIFT))
+#define PHY_DTAR0		(0x01B << PHY_REG_SHIFT)
+#define PHY_DTAR1		(0x01C << PHY_REG_SHIFT)
+#define PHY_DTAR2		(0x01D << PHY_REG_SHIFT)
+#define PHY_DTAR3		(0x01E << PHY_REG_SHIFT)
+#define PHY_DTDR0		(0x01F << PHY_REG_SHIFT)
+#define PHY_DTDR1		(0x020 << PHY_REG_SHIFT)
+#define PHY_DTEDR0		(0x021 << PHY_REG_SHIFT)
+#define PHY_DTEDR1		(0x022 << PHY_REG_SHIFT)
+#define PHY_PGCR2		(0x023 << PHY_REG_SHIFT)
+#define PHY_GPR0		(0x05E << PHY_REG_SHIFT)
+#define PHY_GPR1		(0x05F << PHY_REG_SHIFT)
+/* ZQ */
+#define PHY_ZQ_BASE		(0x060 << PHY_REG_SHIFT)
+#define PHY_ZQ_STRIDE		(0x004 << PHY_REG_SHIFT)
+#define PHY_ZQ_CR0		(0x000 << PHY_REG_SHIFT)
+#define PHY_ZQ_CR1		(0x001 << PHY_REG_SHIFT)
+#define PHY_ZQ_SR0		(0x002 << PHY_REG_SHIFT)
+#define PHY_ZQ_SR1		(0x003 << PHY_REG_SHIFT)
+/* DATX8 */
+#define PHY_DX_BASE		(0x070 << PHY_REG_SHIFT)
+#define PHY_DX_STRIDE		(0x010 << PHY_REG_SHIFT)
+#define PHY_DX_GCR		(0x000 << PHY_REG_SHIFT)
+#define   PHY_DX_GCR_WLRKEN_SHIFT	26		/* Write Level Rank Enable */
+#define   PHY_DX_GCR_WLRKEN_MASK	(0xf << (PHY_DX_GCR_WLRKEN_SHIFT))
+#define PHY_DX_GSR0		(0x001 << PHY_REG_SHIFT)
+#define PHY_DX_GSR1		(0x002 << PHY_REG_SHIFT)
+#define PHY_DX_BDLR0		(0x003 << PHY_REG_SHIFT)
+#define PHY_DX_BDLR1		(0x004 << PHY_REG_SHIFT)
+#define PHY_DX_BDLR2		(0x005 << PHY_REG_SHIFT)
+#define PHY_DX_BDLR3		(0x006 << PHY_REG_SHIFT)
+#define PHY_DX_BDLR4		(0x007 << PHY_REG_SHIFT)
+#define PHY_DX_LCDLR0		(0x008 << PHY_REG_SHIFT)
+#define PHY_DX_LCDLR1		(0x009 << PHY_REG_SHIFT)
+#define PHY_DX_LCDLR2		(0x00A << PHY_REG_SHIFT)
+#define PHY_DX_MDLR		(0x00B << PHY_REG_SHIFT)
+#define PHY_DX_GTR		(0x00C << PHY_REG_SHIFT)
+#define PHY_DX_GSR2		(0x00D << PHY_REG_SHIFT)
+
+#endif /* ARCH_DDRPHY_REGS_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-training.c b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-training.c
new file mode 100644
index 000000000..1decdf1cb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/ddrphy-training.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <time.h>
+
+#include "ddrphy-init.h"
+#include "ddrphy-regs.h"
+
+/* for LD4, Pro4, sLD8 */
+#define NR_DATX8_PER_DDRPHY	2
+
+void ddrphy_prepare_training(void __iomem *phy_base, int rank)
+{
+	void __iomem *dx_base = phy_base + PHY_DX_BASE;
+	int dx;
+	u32 tmp;
+
+	for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) {
+		tmp = readl(dx_base + PHY_DX_GCR);
+		/* Specify the rank that should be write leveled */
+		tmp &= ~PHY_DX_GCR_WLRKEN_MASK;
+		tmp |= (1 << (PHY_DX_GCR_WLRKEN_SHIFT + rank)) &
+			PHY_DX_GCR_WLRKEN_MASK;
+		writel(tmp, dx_base + PHY_DX_GCR);
+		dx_base += PHY_DX_STRIDE;
+	}
+
+	tmp = readl(phy_base + PHY_DTCR);
+	/* Specify the rank used during data bit deskew and eye centering */
+	tmp &= ~PHY_DTCR_DTRANK_MASK;
+	tmp |= (rank << PHY_DTCR_DTRANK_SHIFT) & PHY_DTCR_DTRANK_MASK;
+	/* Use Multi-Purpose Register for DQS gate training */
+	tmp |= PHY_DTCR_DTMPR;
+	/* Specify the rank enabled for data-training */
+	tmp &= ~PHY_DTCR_RANKEN_MASK;
+	tmp |= (1 << (PHY_DTCR_RANKEN_SHIFT + rank)) & PHY_DTCR_RANKEN_MASK;
+	writel(tmp, phy_base + PHY_DTCR);
+}
+
+struct ddrphy_init_sequence {
+	char *description;
+	u32 init_flag;
+	u32 done_flag;
+	u32 err_flag;
+};
+
+static const struct ddrphy_init_sequence init_sequence[] = {
+	{
+		"DRAM Initialization",
+		PHY_PIR_DRAMRST | PHY_PIR_DRAMINIT,
+		PHY_PGSR0_DIDONE,
+		PHY_PGSR0_DIERR
+	},
+	{
+		"Write Leveling",
+		PHY_PIR_WL,
+		PHY_PGSR0_WLDONE,
+		PHY_PGSR0_WLERR
+	},
+	{
+		"Read DQS Gate Training",
+		PHY_PIR_QSGATE,
+		PHY_PGSR0_QSGDONE,
+		PHY_PGSR0_QSGERR
+	},
+	{
+		"Write Leveling Adjustment",
+		PHY_PIR_WLADJ,
+		PHY_PGSR0_WLADONE,
+		PHY_PGSR0_WLAERR
+	},
+	{
+		"Read Bit Deskew",
+		PHY_PIR_RDDSKW,
+		PHY_PGSR0_RDDONE,
+		PHY_PGSR0_RDERR
+	},
+	{
+		"Write Bit Deskew",
+		PHY_PIR_WRDSKW,
+		PHY_PGSR0_WDDONE,
+		PHY_PGSR0_WDERR
+	},
+	{
+		"Read Eye Training",
+		PHY_PIR_RDEYE,
+		PHY_PGSR0_REDONE,
+		PHY_PGSR0_REERR
+	},
+	{
+		"Write Eye Training",
+		PHY_PIR_WREYE,
+		PHY_PGSR0_WEDONE,
+		PHY_PGSR0_WEERR
+	}
+};
+
+int ddrphy_training(void __iomem *phy_base)
+{
+	int i;
+	u32 pgsr0;
+	u32 init_flag = PHY_PIR_INIT;
+	u32 done_flag = PHY_PGSR0_IDONE;
+	int timeout = 50000; /* 50 msec is long enough */
+#ifdef DEBUG
+	ulong start = get_timer(0);
+#endif
+
+	for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+		init_flag |= init_sequence[i].init_flag;
+		done_flag |= init_sequence[i].done_flag;
+	}
+
+	writel(init_flag, phy_base + PHY_PIR);
+
+	do {
+		if (--timeout < 0) {
+			pr_err("timeout during DDR training\n");
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+		pgsr0 = readl(phy_base + PHY_PGSR0);
+	} while ((pgsr0 & done_flag) != done_flag);
+
+	for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+		if (pgsr0 & init_sequence[i].err_flag) {
+			pr_err("%s failed\n", init_sequence[i].description);
+			return -EIO;
+		}
+	}
+
+#ifdef DEBUG
+	pr_debug("DDR training: elapsed time %ld msec\n", get_timer(start));
+#endif
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/umc-ld4.c b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-ld4.c
new file mode 100644
index 000000000..96acca256
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-ld4.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <asm/processor.h>
+
+#include "../init.h"
+#include "ddrphy-init.h"
+#include "umc-regs.h"
+
+#define DRAM_CH_NR	2
+
+enum dram_freq {
+	DRAM_FREQ_1333M,
+	DRAM_FREQ_1600M,
+	DRAM_FREQ_NR,
+};
+
+enum dram_size {
+	DRAM_SZ_128M,
+	DRAM_SZ_256M,
+	DRAM_SZ_NR,
+};
+
+static u32 umc_cmdctla_plus[DRAM_FREQ_NR] = {0x45990b11, 0x36bb0f17};
+static u32 umc_cmdctlb_plus[DRAM_FREQ_NR] = {0x16958924, 0x18c6aa24};
+static u32 umc_spcctla[DRAM_FREQ_NR][DRAM_SZ_NR] = {
+	{0x00240512, 0x00350512},
+	{0x002b0617, 0x003f0617},
+};
+static u32 umc_spcctlb[DRAM_FREQ_NR] = {0x00ff0006, 0x00ff0008};
+static u32 umc_rdatactl[DRAM_FREQ_NR] = {0x000a00ac, 0x000c00ae};
+
+static int umc_get_rank(int ch)
+{
+	return ch;	/* ch0: rank0, ch1: rank1 for this SoC */
+}
+
+static void umc_start_ssif(void __iomem *ssif_base)
+{
+	writel(0x00000000, ssif_base + 0x0000b004);
+	writel(0xffffffff, ssif_base + 0x0000c004);
+	writel(0x000fffcf, ssif_base + 0x0000c008);
+	writel(0x00000001, ssif_base + 0x0000b000);
+	writel(0x00000001, ssif_base + 0x0000c000);
+	writel(0x03010101, ssif_base + UMC_MDMCHSEL);
+	writel(0x03010100, ssif_base + UMC_DMDCHSEL);
+
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
+
+	writel(0x00000001, ssif_base + UMC_CPURST);
+	writel(0x00000001, ssif_base + UMC_IDSRST);
+	writel(0x00000001, ssif_base + UMC_IXMRST);
+	writel(0x00000001, ssif_base + UMC_MDMRST);
+	writel(0x00000001, ssif_base + UMC_MDDRST);
+	writel(0x00000001, ssif_base + UMC_SIORST);
+	writel(0x00000001, ssif_base + UMC_VIORST);
+	writel(0x00000001, ssif_base + UMC_FRCRST);
+	writel(0x00000001, ssif_base + UMC_RGLRST);
+	writel(0x00000001, ssif_base + UMC_AIORST);
+	writel(0x00000001, ssif_base + UMC_DMDRST);
+}
+
+static int umc_dramcont_init(void __iomem *dc_base, void __iomem *ca_base,
+			     int freq, unsigned long size, bool ddr3plus)
+{
+	enum dram_freq freq_e;
+	enum dram_size size_e;
+
+	if (!ddr3plus) {
+		pr_err("DDR3 standard is not supported\n");
+		return -EINVAL;
+	}
+
+	switch (freq) {
+	case 1333:
+		freq_e = DRAM_FREQ_1333M;
+		break;
+	case 1600:
+		freq_e = DRAM_FREQ_1600M;
+		break;
+	default:
+		pr_err("unsupported DRAM frequency %d MHz\n", freq);
+		return -EINVAL;
+	}
+
+	switch (size) {
+	case 0:
+		return 0;
+	case SZ_128M:
+		size_e = DRAM_SZ_128M;
+		break;
+	case SZ_256M:
+		size_e = DRAM_SZ_256M;
+		break;
+	default:
+		pr_err("unsupported DRAM size 0x%08lx\n", size);
+		return -EINVAL;
+	}
+
+	writel(umc_cmdctla_plus[freq_e], dc_base + UMC_CMDCTLA);
+	writel(umc_cmdctlb_plus[freq_e], dc_base + UMC_CMDCTLB);
+	writel(umc_spcctla[freq_e][size_e], dc_base + UMC_SPCCTLA);
+	writel(umc_spcctlb[freq_e], dc_base + UMC_SPCCTLB);
+	writel(umc_rdatactl[freq_e], dc_base + UMC_RDATACTL_D0);
+	writel(0x04060806, dc_base + UMC_WDATACTL_D0);
+	writel(0x04a02000, dc_base + UMC_DATASET);
+	writel(0x00000000, ca_base + 0x2300);
+	writel(0x00400020, dc_base + UMC_DCCGCTL);
+	writel(0x00000003, dc_base + 0x7000);
+	writel(0x0000000f, dc_base + 0x8000);
+	writel(0x000000c3, dc_base + 0x8004);
+	writel(0x00000071, dc_base + 0x8008);
+	writel(0x0000003b, dc_base + UMC_DICGCTLA);
+	writel(0x020a0808, dc_base + UMC_DICGCTLB);
+	writel(0x00000004, dc_base + UMC_FLOWCTLG);
+	writel(0x80000201, ca_base + 0xc20);
+	writel(0x0801e01e, dc_base + UMC_FLOWCTLA);
+	writel(0x00200000, dc_base + UMC_FLOWCTLB);
+	writel(0x00004444, dc_base + UMC_FLOWCTLC);
+	writel(0x200a0a00, dc_base + UMC_SPCSETB);
+	writel(0x00000000, dc_base + UMC_SPCSETD);
+	writel(0x00000520, dc_base + UMC_DFICUPDCTLA);
+
+	return 0;
+}
+
+static int umc_ch_init(void __iomem *dc_base, void __iomem *ca_base,
+		       int freq, unsigned long size, bool ddr3plus, int ch)
+{
+	void __iomem *phy_base = dc_base + 0x00001000;
+	int ret;
+
+	writel(UMC_INITSET_INIT1EN, dc_base + UMC_INITSET);
+	while (readl(dc_base + UMC_INITSTAT) & UMC_INITSTAT_INIT1ST)
+		cpu_relax();
+
+	writel(0x00000101, dc_base + UMC_DIOCTLA);
+
+	ret = uniphier_ld4_ddrphy_init(phy_base, freq, ddr3plus);
+	if (ret)
+		return ret;
+
+	ddrphy_prepare_training(phy_base, umc_get_rank(ch));
+	ret = ddrphy_training(phy_base);
+	if (ret)
+		return ret;
+
+	return umc_dramcont_init(dc_base, ca_base, freq, size, ddr3plus);
+}
+
+int uniphier_ld4_umc_init(const struct uniphier_board_data *bd)
+{
+	void __iomem *umc_base = (void __iomem *)0x5b800000;
+	void __iomem *ca_base = umc_base + 0x00001000;
+	void __iomem *dc_base = umc_base + 0x00400000;
+	void __iomem *ssif_base = umc_base;
+	int ch, ret;
+
+	for (ch = 0; ch < DRAM_CH_NR; ch++) {
+		ret = umc_ch_init(dc_base, ca_base, bd->dram_freq,
+				  bd->dram_ch[ch].size,
+				  !!(bd->flags & UNIPHIER_BD_DDR3PLUS), ch);
+		if (ret) {
+			pr_err("failed to initialize UMC ch%d\n", ch);
+			return ret;
+		}
+
+		ca_base += 0x00001000;
+		dc_base += 0x00200000;
+	}
+
+	umc_start_ssif(ssif_base);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pro4.c b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pro4.c
new file mode 100644
index 000000000..cde39b499
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pro4.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <asm/processor.h>
+
+#include "../init.h"
+#include "ddrphy-init.h"
+#include "umc-regs.h"
+
+#define DRAM_CH_NR	2
+
+enum dram_size {
+	DRAM_SZ_128M,
+	DRAM_SZ_256M,
+	DRAM_SZ_512M,
+	DRAM_SZ_NR,
+};
+
+static u32 umc_spcctla[DRAM_SZ_NR] = {0x002b0617, 0x003f0617, 0x00770617};
+
+static void umc_start_ssif(void __iomem *ssif_base)
+{
+	writel(0x00000000, ssif_base + 0x0000b004);
+	writel(0xffffffff, ssif_base + 0x0000c004);
+	writel(0x000fffcf, ssif_base + 0x0000c008);
+	writel(0x00000001, ssif_base + 0x0000b000);
+	writel(0x00000001, ssif_base + 0x0000c000);
+
+	writel(0x03010100, ssif_base + UMC_HDMCHSEL);
+	writel(0x03010101, ssif_base + UMC_MDMCHSEL);
+	writel(0x03010100, ssif_base + UMC_DVCCHSEL);
+	writel(0x03010100, ssif_base + UMC_DMDCHSEL);
+
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
+	writel(0x00000000, ssif_base + 0x0000c044);		/* DCGIV_SSIF_REG */
+
+	writel(0x00000001, ssif_base + UMC_CPURST);
+	writel(0x00000001, ssif_base + UMC_IDSRST);
+	writel(0x00000001, ssif_base + UMC_IXMRST);
+	writel(0x00000001, ssif_base + UMC_HDMRST);
+	writel(0x00000001, ssif_base + UMC_MDMRST);
+	writel(0x00000001, ssif_base + UMC_HDDRST);
+	writel(0x00000001, ssif_base + UMC_MDDRST);
+	writel(0x00000001, ssif_base + UMC_SIORST);
+	writel(0x00000001, ssif_base + UMC_GIORST);
+	writel(0x00000001, ssif_base + UMC_HD2RST);
+	writel(0x00000001, ssif_base + UMC_VIORST);
+	writel(0x00000001, ssif_base + UMC_DVCRST);
+	writel(0x00000001, ssif_base + UMC_RGLRST);
+	writel(0x00000001, ssif_base + UMC_VPERST);
+	writel(0x00000001, ssif_base + UMC_AIORST);
+	writel(0x00000001, ssif_base + UMC_DMDRST);
+}
+
+static int umc_dramcont_init(void __iomem *dc_base, void __iomem *ca_base,
+			     int freq, unsigned long size, bool ddr3plus)
+{
+	enum dram_size size_e;
+
+	if (freq != 1600) {
+		pr_err("Unsupported DDR frequency %d MHz\n", freq);
+		return -EINVAL;
+	}
+
+	if (ddr3plus) {
+		pr_err("DDR3+ is not supported\n");
+		return -EINVAL;
+	}
+
+	switch (size) {
+	case SZ_128M:
+		size_e = DRAM_SZ_128M;
+		break;
+	case SZ_256M:
+		size_e = DRAM_SZ_256M;
+		break;
+	case SZ_512M:
+		size_e = DRAM_SZ_512M;
+		break;
+	default:
+		pr_err("unsupported DRAM size 0x%08lx (per 16bit)\n", size);
+		return -EINVAL;
+	}
+
+	writel(0x66bb0f17, dc_base + UMC_CMDCTLA);
+	writel(0x18c6aa44, dc_base + UMC_CMDCTLB);
+	writel(umc_spcctla[size_e], dc_base + UMC_SPCCTLA);
+	writel(0x00ff0008, dc_base + UMC_SPCCTLB);
+	writel(0x000c00ae, dc_base + UMC_RDATACTL_D0);
+	writel(0x000c00ae, dc_base + UMC_RDATACTL_D1);
+	writel(0x04060802, dc_base + UMC_WDATACTL_D0);
+	writel(0x04060802, dc_base + UMC_WDATACTL_D1);
+	writel(0x04a02000, dc_base + UMC_DATASET);
+	writel(0x00000000, ca_base + 0x2300);
+	writel(0x00400020, dc_base + UMC_DCCGCTL);
+	writel(0x0000000f, dc_base + 0x7000);
+	writel(0x0000000f, dc_base + 0x8000);
+	writel(0x000000c3, dc_base + 0x8004);
+	writel(0x00000071, dc_base + 0x8008);
+	writel(0x00000004, dc_base + UMC_FLOWCTLG);
+	writel(0x00000000, dc_base + 0x0060);
+	writel(0x80000201, ca_base + 0xc20);
+	writel(0x0801e01e, dc_base + UMC_FLOWCTLA);
+	writel(0x00200000, dc_base + UMC_FLOWCTLB);
+	writel(0x00004444, dc_base + UMC_FLOWCTLC);
+	writel(0x200a0a00, dc_base + UMC_SPCSETB);
+	writel(0x00010000, dc_base + UMC_SPCSETD);
+	writel(0x80000020, dc_base + UMC_DFICUPDCTLA);
+
+	return 0;
+}
+
+static int umc_ch_init(void __iomem *dc_base, void __iomem *ca_base,
+		       int freq, unsigned long size, unsigned int width,
+		       bool ddr3plus)
+{
+	void __iomem *phy_base = dc_base + 0x00001000;
+	int nr_phy = width / 16;
+	int phy, ret;
+
+	writel(UMC_INITSET_INIT1EN, dc_base + UMC_INITSET);
+	while (readl(dc_base + UMC_INITSTAT) & UMC_INITSTAT_INIT1ST)
+		cpu_relax();
+
+	for (phy = 0; phy < nr_phy; phy++) {
+		writel(0x00000100 | ((1 << (phy + 1)) - 1),
+		       dc_base + UMC_DIOCTLA);
+
+		ret = uniphier_ld4_ddrphy_init(phy_base, freq, ddr3plus);
+		if (ret)
+			return ret;
+
+		ddrphy_prepare_training(phy_base, phy);
+		ret = ddrphy_training(phy_base);
+		if (ret)
+			return ret;
+
+		phy_base += 0x00001000;
+	}
+
+	return umc_dramcont_init(dc_base, ca_base, freq, size / (width / 16),
+				 ddr3plus);
+}
+
+int uniphier_pro4_umc_init(const struct uniphier_board_data *bd)
+{
+	void __iomem *umc_base = (void __iomem *)0x5b800000;
+	void __iomem *ca_base = umc_base + 0x00001000;
+	void __iomem *dc_base = umc_base + 0x00400000;
+	void __iomem *ssif_base = umc_base;
+	int ch, ret;
+
+	for (ch = 0; ch < DRAM_CH_NR; ch++) {
+		ret = umc_ch_init(dc_base, ca_base, bd->dram_freq,
+				  bd->dram_ch[ch].size,
+				  bd->dram_ch[ch].width,
+				  !!(bd->flags & UNIPHIER_BD_DDR3PLUS));
+		if (ret) {
+			pr_err("failed to initialize UMC ch%d\n", ch);
+			return ret;
+		}
+
+		ca_base += 0x00001000;
+		dc_base += 0x00200000;
+	}
+
+	umc_start_ssif(ssif_base);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pro5.c b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pro5.c
new file mode 100644
index 000000000..a002b309e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pro5.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ */
+
+#include "../init.h"
+
+int uniphier_pro5_umc_init(const struct uniphier_board_data *bd)
+{
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pxs2.c b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pxs2.c
new file mode 100644
index 000000000..73574201e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-pxs2.c
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * based on commit 21b6e480f92ccc38fe0502e3116411d6509d3bf2 of Diag by:
+ * Copyright (C) 2015 Socionext Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/printk.h>
+#include <linux/sizes.h>
+#include <asm/processor.h>
+#include <time.h>
+
+#include "../init.h"
+#include "../soc-info.h"
+#include "ddrmphy-regs.h"
+#include "umc-regs.h"
+
+#define DRAM_CH_NR	3
+
+enum dram_freq {
+	DRAM_FREQ_1866M,
+	DRAM_FREQ_2133M,
+	DRAM_FREQ_NR,
+};
+
+enum dram_size {
+	DRAM_SZ_256M,
+	DRAM_SZ_512M,
+	DRAM_SZ_NR,
+};
+
+/* PHY */
+static u32 ddrphy_pgcr2[DRAM_FREQ_NR] = {0x00FC7E5D, 0x00FC90AB};
+static u32 ddrphy_ptr0[DRAM_FREQ_NR] = {0x0EA09205, 0x10C0A6C6};
+static u32 ddrphy_ptr1[DRAM_FREQ_NR] = {0x0DAC041B, 0x0FA104B1};
+static u32 ddrphy_ptr3[DRAM_FREQ_NR] = {0x15171e45, 0x18182357};
+static u32 ddrphy_ptr4[DRAM_FREQ_NR] = {0x0e9ad8e9, 0x10b34157};
+static u32 ddrphy_dtpr0[DRAM_FREQ_NR] = {0x35a00d88, 0x39e40e88};
+static u32 ddrphy_dtpr1[DRAM_FREQ_NR] = {0x2288cc2c, 0x228a04d0};
+static u32 ddrphy_dtpr2[DRAM_FREQ_NR] = {0x50005e00, 0x50006a00};
+static u32 ddrphy_dtpr3[DRAM_FREQ_NR] = {0x0010cb49, 0x0010ec89};
+static u32 ddrphy_mr0[DRAM_FREQ_NR] = {0x00000115, 0x00000125};
+static u32 ddrphy_mr2[DRAM_FREQ_NR] = {0x000002a0, 0x000002a8};
+
+/* dependent on package and board design */
+static u32 ddrphy_acbdlr0[DRAM_CH_NR] = {0x0000000c, 0x0000000c, 0x00000009};
+
+/* DDR multiPHY */
+static inline int ddrphy_get_rank(int dx)
+{
+	return dx / 2;
+}
+
+static void ddrphy_fifo_reset(void __iomem *phy_base)
+{
+	u32 tmp;
+
+	tmp = readl(phy_base + MPHY_PGCR0);
+	tmp &= ~MPHY_PGCR0_PHYFRST;
+	writel(tmp, phy_base + MPHY_PGCR0);
+
+	udelay(1);
+
+	tmp |= MPHY_PGCR0_PHYFRST;
+	writel(tmp, phy_base + MPHY_PGCR0);
+
+	udelay(1);
+}
+
+static void ddrphy_vt_ctrl(void __iomem *phy_base, int enable)
+{
+	u32 tmp;
+
+	tmp = readl(phy_base + MPHY_PGCR1);
+
+	if (enable)
+		tmp &= ~MPHY_PGCR1_INHVT;
+	else
+		tmp |= MPHY_PGCR1_INHVT;
+
+	writel(tmp, phy_base + MPHY_PGCR1);
+
+	if (!enable) {
+		while (!(readl(phy_base + MPHY_PGSR1) & MPHY_PGSR1_VTSTOP))
+			cpu_relax();
+	}
+}
+
+static void ddrphy_dqs_delay_fixup(void __iomem *phy_base, int nr_dx, int step)
+{
+	int dx;
+	u32 lcdlr1, rdqsd;
+	void __iomem *dx_base = phy_base + MPHY_DX_BASE;
+
+	ddrphy_vt_ctrl(phy_base, 0);
+
+	for (dx = 0; dx < nr_dx; dx++) {
+		lcdlr1 = readl(dx_base + MPHY_DX_LCDLR1);
+		rdqsd = (lcdlr1 >> 8) & 0xff;
+		rdqsd = clamp(rdqsd + step, 0U, 0xffU);
+		lcdlr1 = (lcdlr1 & ~(0xff << 8)) | (rdqsd << 8);
+		writel(lcdlr1, dx_base + MPHY_DX_LCDLR1);
+		readl(dx_base + MPHY_DX_LCDLR1); /* relax */
+		dx_base += MPHY_DX_STRIDE;
+	}
+
+	ddrphy_vt_ctrl(phy_base, 1);
+}
+
+static int ddrphy_get_system_latency(void __iomem *phy_base, int width)
+{
+	void __iomem *dx_base = phy_base + MPHY_DX_BASE;
+	const int nr_dx = width / 8;
+	int dx, rank;
+	u32 gtr;
+	int dgsl, dgsl_min = INT_MAX, dgsl_max = 0;
+
+	for (dx = 0; dx < nr_dx; dx++) {
+		gtr = readl(dx_base + MPHY_DX_GTR);
+		for (rank = 0; rank < 4; rank++) {
+			dgsl = gtr & 0x7;
+			/* if dgsl is zero, this rank was not trained. skip. */
+			if (dgsl) {
+				dgsl_min = min(dgsl_min, dgsl);
+				dgsl_max = max(dgsl_max, dgsl);
+			}
+			gtr >>= 3;
+		}
+		dx_base += MPHY_DX_STRIDE;
+	}
+
+	if (dgsl_min != dgsl_max)
+		pr_warn("DQS Gateing System Latencies are not all leveled.\n");
+
+	return dgsl_max;
+}
+
+static void ddrphy_init(void __iomem *phy_base, enum dram_freq freq, int width,
+			int ch)
+{
+	u32 tmp;
+	void __iomem *zq_base, *dx_base;
+	int zq, dx;
+	int nr_dx;
+
+	nr_dx = width / 8;
+
+	writel(MPHY_PIR_ZCALBYP, phy_base + MPHY_PIR);
+	/*
+	 * Disable RGLVT bit (Read DQS Gating LCDL Delay VT Compensation)
+	 * to avoid read error issue.
+	 */
+	writel(0x07d81e37, phy_base + MPHY_PGCR0);
+	writel(0x0200c4e0, phy_base + MPHY_PGCR1);
+
+	tmp = ddrphy_pgcr2[freq];
+	if (width >= 32)
+		tmp |= MPHY_PGCR2_DUALCHN | MPHY_PGCR2_ACPDDC;
+	writel(tmp, phy_base + MPHY_PGCR2);
+
+	writel(ddrphy_ptr0[freq], phy_base + MPHY_PTR0);
+	writel(ddrphy_ptr1[freq], phy_base + MPHY_PTR1);
+	writel(0x00083def, phy_base + MPHY_PTR2);
+	writel(ddrphy_ptr3[freq], phy_base + MPHY_PTR3);
+	writel(ddrphy_ptr4[freq], phy_base + MPHY_PTR4);
+
+	writel(ddrphy_acbdlr0[ch], phy_base + MPHY_ACBDLR0);
+
+	writel(0x55555555, phy_base + MPHY_ACIOCR1);
+	writel(0x00000000, phy_base + MPHY_ACIOCR2);
+	writel(0x55555555, phy_base + MPHY_ACIOCR3);
+	writel(0x00000000, phy_base + MPHY_ACIOCR4);
+	writel(0x00000055, phy_base + MPHY_ACIOCR5);
+	writel(0x00181aa4, phy_base + MPHY_DXCCR);
+
+	writel(0x0024641e, phy_base + MPHY_DSGCR);
+	writel(0x0000040b, phy_base + MPHY_DCR);
+	writel(ddrphy_dtpr0[freq], phy_base + MPHY_DTPR0);
+	writel(ddrphy_dtpr1[freq], phy_base + MPHY_DTPR1);
+	writel(ddrphy_dtpr2[freq], phy_base + MPHY_DTPR2);
+	writel(ddrphy_dtpr3[freq], phy_base + MPHY_DTPR3);
+	writel(ddrphy_mr0[freq], phy_base + MPHY_MR0);
+	writel(0x00000006, phy_base + MPHY_MR1);
+	writel(ddrphy_mr2[freq], phy_base + MPHY_MR2);
+	writel(0x00000000, phy_base + MPHY_MR3);
+
+	tmp = 0;
+	for (dx = 0; dx < nr_dx; dx++)
+		tmp |= BIT(MPHY_DTCR_RANKEN_SHIFT + ddrphy_get_rank(dx));
+	writel(0x90003087 | tmp, phy_base + MPHY_DTCR);
+
+	writel(0x00000000, phy_base + MPHY_DTAR0);
+	writel(0x00000008, phy_base + MPHY_DTAR1);
+	writel(0x00000010, phy_base + MPHY_DTAR2);
+	writel(0x00000018, phy_base + MPHY_DTAR3);
+	writel(0xdd22ee11, phy_base + MPHY_DTDR0);
+	writel(0x7788bb44, phy_base + MPHY_DTDR1);
+
+	/* impedance control settings */
+	writel(0x04048900, phy_base + MPHY_ZQCR);
+
+	zq_base = phy_base + MPHY_ZQ_BASE;
+	for (zq = 0; zq < 4; zq++) {
+		/*
+		 * board-dependent
+		 * PXS2: CH0ZQ0=0x5B, CH1ZQ0=0x5B, CH2ZQ0=0x59, others=0x5D
+		 */
+		writel(0x0007BB5D, zq_base + MPHY_ZQ_PR);
+		zq_base += MPHY_ZQ_STRIDE;
+	}
+
+	/* DATX8 settings */
+	dx_base = phy_base + MPHY_DX_BASE;
+	for (dx = 0; dx < 4; dx++) {
+		tmp = readl(dx_base + MPHY_DX_GCR0);
+		tmp &= ~MPHY_DX_GCR0_WLRKEN_MASK;
+		tmp |= BIT(MPHY_DX_GCR0_WLRKEN_SHIFT + ddrphy_get_rank(dx)) &
+						MPHY_DX_GCR0_WLRKEN_MASK;
+		writel(tmp, dx_base + MPHY_DX_GCR0);
+
+		writel(0x00000000, dx_base + MPHY_DX_GCR1);
+		writel(0x00000000, dx_base + MPHY_DX_GCR2);
+		writel(0x00000000, dx_base + MPHY_DX_GCR3);
+		dx_base += MPHY_DX_STRIDE;
+	}
+
+	while (!(readl(phy_base + MPHY_PGSR0) & MPHY_PGSR0_IDONE))
+		cpu_relax();
+
+	ddrphy_dqs_delay_fixup(phy_base, nr_dx, -4);
+}
+
+struct ddrphy_init_sequence {
+	char *description;
+	u32 init_flag;
+	u32 done_flag;
+	u32 err_flag;
+};
+
+static const struct ddrphy_init_sequence impedance_calibration_sequence[] = {
+	{
+		"Impedance Calibration",
+		MPHY_PIR_ZCAL,
+		MPHY_PGSR0_ZCDONE,
+		MPHY_PGSR0_ZCERR,
+	},
+	{ /* sentinel */ }
+};
+
+static const struct ddrphy_init_sequence dram_init_sequence[] = {
+	{
+		"DRAM Initialization",
+		MPHY_PIR_DRAMRST | MPHY_PIR_DRAMINIT,
+		MPHY_PGSR0_DIDONE,
+		0,
+	},
+	{ /* sentinel */ }
+};
+
+static const struct ddrphy_init_sequence training_sequence[] = {
+	{
+		"Write Leveling",
+		MPHY_PIR_WL,
+		MPHY_PGSR0_WLDONE,
+		MPHY_PGSR0_WLERR,
+	},
+	{
+		"Read DQS Gate Training",
+		MPHY_PIR_QSGATE,
+		MPHY_PGSR0_QSGDONE,
+		MPHY_PGSR0_QSGERR,
+	},
+	{
+		"Write Leveling Adjustment",
+		MPHY_PIR_WLADJ,
+		MPHY_PGSR0_WLADONE,
+		MPHY_PGSR0_WLAERR,
+	},
+	{
+		"Read Bit Deskew",
+		MPHY_PIR_RDDSKW,
+		MPHY_PGSR0_RDDONE,
+		MPHY_PGSR0_RDERR,
+	},
+	{
+		"Write Bit Deskew",
+		MPHY_PIR_WRDSKW,
+		MPHY_PGSR0_WDDONE,
+		MPHY_PGSR0_WDERR,
+	},
+	{
+		"Read Eye Training",
+		MPHY_PIR_RDEYE,
+		MPHY_PGSR0_REDONE,
+		MPHY_PGSR0_REERR,
+	},
+	{
+		"Write Eye Training",
+		MPHY_PIR_WREYE,
+		MPHY_PGSR0_WEDONE,
+		MPHY_PGSR0_WEERR,
+	},
+	{ /* sentinel */ }
+};
+
+static int __ddrphy_training(void __iomem *phy_base,
+			     const struct ddrphy_init_sequence *seq)
+{
+	const struct ddrphy_init_sequence *s;
+	u32 pgsr0;
+	u32 init_flag = MPHY_PIR_INIT;
+	u32 done_flag = MPHY_PGSR0_IDONE;
+	int timeout = 50000; /* 50 msec is long enough */
+	unsigned long start = 0;
+
+#ifdef DEBUG
+	start = get_timer(0);
+#endif
+
+	for (s = seq; s->description; s++) {
+		init_flag |= s->init_flag;
+		done_flag |= s->done_flag;
+	}
+
+	writel(init_flag, phy_base + MPHY_PIR);
+
+	do {
+		if (--timeout < 0) {
+			pr_err("%s: error: timeout during DDR training\n",
+			       __func__);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+		pgsr0 = readl(phy_base + MPHY_PGSR0);
+	} while ((pgsr0 & done_flag) != done_flag);
+
+	for (s = seq; s->description; s++) {
+		if (pgsr0 & s->err_flag) {
+			pr_err("%s: error: %s failed\n", __func__,
+			       s->description);
+			return -EIO;
+		}
+	}
+
+	pr_debug("DDRPHY training: elapsed time %ld msec\n", get_timer(start));
+
+	return 0;
+}
+
+static int ddrphy_impedance_calibration(void __iomem *phy_base)
+{
+	int ret;
+	u32 tmp;
+
+	ret = __ddrphy_training(phy_base, impedance_calibration_sequence);
+	if (ret)
+		return ret;
+
+	/*
+	 * Because of a hardware bug, IDONE flag is set when the first ZQ block
+	 * is calibrated.  The flag does not guarantee the completion for all
+	 * the ZQ blocks.  Wait a little more just in case.
+	 */
+	udelay(1);
+
+	/* reflect ZQ settings and enable average algorithm*/
+	tmp = readl(phy_base + MPHY_ZQCR);
+	tmp |= MPHY_ZQCR_FORCE_ZCAL_VT_UPDATE;
+	writel(tmp, phy_base + MPHY_ZQCR);
+	tmp &= ~MPHY_ZQCR_FORCE_ZCAL_VT_UPDATE;
+	tmp |= MPHY_ZQCR_AVGEN;
+	writel(tmp, phy_base + MPHY_ZQCR);
+
+	return 0;
+}
+
+static int ddrphy_dram_init(void __iomem *phy_base)
+{
+	return __ddrphy_training(phy_base, dram_init_sequence);
+}
+
+static int ddrphy_training(void __iomem *phy_base)
+{
+	return __ddrphy_training(phy_base, training_sequence);
+}
+
+/* UMC */
+static u32 umc_cmdctla[DRAM_FREQ_NR] = {0x66DD131D, 0x77EE1722};
+/*
+ * The ch2 is a different generation UMC core.
+ * The register spec is different, unfortunately.
+ */
+static u32 umc_cmdctlb_ch01[DRAM_FREQ_NR] = {0x13E87C44, 0x18F88C44};
+static u32 umc_cmdctlb_ch2[DRAM_FREQ_NR] = {0x19E8DC44, 0x1EF8EC44};
+static u32 umc_spcctla[DRAM_FREQ_NR][DRAM_SZ_NR] = {
+	{0x004A071D, 0x0078071D},
+	{0x0055081E, 0x0089081E},
+};
+
+static u32 umc_spcctlb[] = {0x00FF000A, 0x00FF000B};
+/* The ch2 is different for some reason only hardware guys know... */
+static u32 umc_flowctla_ch01[] = {0x0800001E, 0x08000022};
+static u32 umc_flowctla_ch2[] = {0x0800001E, 0x0800001E};
+
+static void umc_set_system_latency(void __iomem *dc_base, int phy_latency)
+{
+	u32 val;
+	int latency;
+
+	val = readl(dc_base + UMC_RDATACTL_D0);
+	latency = (val & UMC_RDATACTL_RADLTY_MASK) >> UMC_RDATACTL_RADLTY_SHIFT;
+	latency += (val & UMC_RDATACTL_RAD2LTY_MASK) >>
+						UMC_RDATACTL_RAD2LTY_SHIFT;
+	/*
+	 * UMC works at the half clock rate of the PHY.
+	 * The LSB of latency is ignored
+	 */
+	latency += phy_latency & ~1;
+
+	val &= ~(UMC_RDATACTL_RADLTY_MASK | UMC_RDATACTL_RAD2LTY_MASK);
+	if (latency > 0xf) {
+		val |= 0xf << UMC_RDATACTL_RADLTY_SHIFT;
+		val |= (latency - 0xf) << UMC_RDATACTL_RAD2LTY_SHIFT;
+	} else {
+		val |= latency << UMC_RDATACTL_RADLTY_SHIFT;
+	}
+
+	writel(val, dc_base + UMC_RDATACTL_D0);
+	writel(val, dc_base + UMC_RDATACTL_D1);
+
+	readl(dc_base + UMC_RDATACTL_D1); /* relax */
+}
+
+/* enable/disable auto refresh */
+static void umc_refresh_ctrl(void __iomem *dc_base, int enable)
+{
+	u32 tmp;
+
+	tmp = readl(dc_base + UMC_SPCSETB);
+	tmp &= ~UMC_SPCSETB_AREFMD_MASK;
+
+	if (enable)
+		tmp |= UMC_SPCSETB_AREFMD_ARB;
+	else
+		tmp |= UMC_SPCSETB_AREFMD_REG;
+
+	writel(tmp, dc_base + UMC_SPCSETB);
+	udelay(1);
+}
+
+static void umc_ud_init(void __iomem *umc_base, int ch)
+{
+	writel(0x00000003, umc_base + UMC_BITPERPIXELMODE_D0);
+
+	if (ch == 2)
+		writel(0x00000033, umc_base + UMC_PAIR1DOFF_D0);
+}
+
+static int umc_dc_init(void __iomem *dc_base, enum dram_freq freq,
+		       unsigned long size, int width, int ch)
+{
+	enum dram_size size_e;
+	int latency;
+	u32 val;
+
+	switch (size) {
+	case 0:
+		return 0;
+	case SZ_256M:
+		size_e = DRAM_SZ_256M;
+		break;
+	case SZ_512M:
+		size_e = DRAM_SZ_512M;
+		break;
+	default:
+		pr_err("unsupported DRAM size 0x%08lx (per 16bit) for ch%d\n",
+		       size, ch);
+		return -EINVAL;
+	}
+
+	writel(umc_cmdctla[freq], dc_base + UMC_CMDCTLA);
+
+	writel(ch == 2 ? umc_cmdctlb_ch2[freq] : umc_cmdctlb_ch01[freq],
+	       dc_base + UMC_CMDCTLB);
+
+	writel(umc_spcctla[freq][size_e], dc_base + UMC_SPCCTLA);
+	writel(umc_spcctlb[freq], dc_base + UMC_SPCCTLB);
+
+	val = 0x000e000e;
+	latency = 12;
+	/* ES2 inserted one more FF to the logic. */
+	if (uniphier_get_soc_model() >= 2)
+		latency += 2;
+
+	if (latency > 0xf) {
+		val |= 0xf << UMC_RDATACTL_RADLTY_SHIFT;
+		val |= (latency - 0xf) << UMC_RDATACTL_RAD2LTY_SHIFT;
+	} else {
+		val |= latency << UMC_RDATACTL_RADLTY_SHIFT;
+	}
+
+	writel(val, dc_base + UMC_RDATACTL_D0);
+	if (width >= 32)
+		writel(val, dc_base + UMC_RDATACTL_D1);
+
+	writel(0x04060A02, dc_base + UMC_WDATACTL_D0);
+	if (width >= 32)
+		writel(0x04060A02, dc_base + UMC_WDATACTL_D1);
+	writel(0x04000000, dc_base + UMC_DATASET);
+	writel(0x00400020, dc_base + UMC_DCCGCTL);
+	writel(0x00000084, dc_base + UMC_FLOWCTLG);
+	writel(0x00000000, dc_base + UMC_ACSSETA);
+
+	writel(ch == 2 ? umc_flowctla_ch2[freq] : umc_flowctla_ch01[freq],
+	       dc_base + UMC_FLOWCTLA);
+
+	writel(0x00004400, dc_base + UMC_FLOWCTLC);
+	writel(0x200A0A00, dc_base + UMC_SPCSETB);
+	writel(0x00000520, dc_base + UMC_DFICUPDCTLA);
+	writel(0x0000000D, dc_base + UMC_RESPCTL);
+
+	if (ch != 2) {
+		writel(0x00202000, dc_base + UMC_FLOWCTLB);
+		writel(0xFDBFFFFF, dc_base + UMC_FLOWCTLOB0);
+		writel(0xFFFFFFFF, dc_base + UMC_FLOWCTLOB1);
+		writel(0x00080700, dc_base + UMC_BSICMAPSET);
+	} else {
+		writel(0x00200000, dc_base + UMC_FLOWCTLB);
+		writel(0x00000000, dc_base + UMC_BSICMAPSET);
+	}
+
+	writel(0x00000000, dc_base + UMC_ERRMASKA);
+	writel(0x00000000, dc_base + UMC_ERRMASKB);
+
+	return 0;
+}
+
+static int umc_ch_init(void __iomem *umc_ch_base, enum dram_freq freq,
+		       unsigned long size, unsigned int width, int ch)
+{
+	void __iomem *dc_base = umc_ch_base + 0x00011000;
+	void __iomem *phy_base = umc_ch_base + 0x00030000;
+	int ret;
+
+	writel(0x00000002, dc_base + UMC_INITSET);
+	while (readl(dc_base + UMC_INITSTAT) & BIT(2))
+		cpu_relax();
+
+	/* deassert PHY reset signals */
+	writel(UMC_DIOCTLA_CTL_NRST | UMC_DIOCTLA_CFG_NRST,
+	       dc_base + UMC_DIOCTLA);
+
+	ddrphy_init(phy_base, freq, width, ch);
+
+	ret = ddrphy_impedance_calibration(phy_base);
+	if (ret)
+		return ret;
+
+	ddrphy_dram_init(phy_base);
+	if (ret)
+		return ret;
+
+	ret = umc_dc_init(dc_base, freq, size, width, ch);
+	if (ret)
+		return ret;
+
+	umc_ud_init(umc_ch_base, ch);
+
+	ret = ddrphy_training(phy_base);
+	if (ret)
+		return ret;
+
+	udelay(1);
+
+	/* match the system latency between UMC and PHY */
+	umc_set_system_latency(dc_base,
+			       ddrphy_get_system_latency(phy_base, width));
+
+	udelay(1);
+
+	/* stop auto refresh before clearing FIFO in PHY */
+	umc_refresh_ctrl(dc_base, 0);
+	ddrphy_fifo_reset(phy_base);
+	umc_refresh_ctrl(dc_base, 1);
+
+	udelay(10);
+
+	return 0;
+}
+
+static void um_init(void __iomem *um_base)
+{
+	writel(0x000000ff, um_base + UMC_MBUS0);
+	writel(0x000000ff, um_base + UMC_MBUS1);
+	writel(0x000000ff, um_base + UMC_MBUS2);
+	writel(0x000000ff, um_base + UMC_MBUS3);
+}
+
+int uniphier_pxs2_umc_init(const struct uniphier_board_data *bd)
+{
+	void __iomem *um_base = (void __iomem *)0x5b600000;
+	void __iomem *umc_ch_base = (void __iomem *)0x5b800000;
+	enum dram_freq freq;
+	int ch, ret;
+
+	switch (bd->dram_freq) {
+	case 1866:
+		freq = DRAM_FREQ_1866M;
+		break;
+	case 2133:
+		freq = DRAM_FREQ_2133M;
+		break;
+	default:
+		pr_err("unsupported DRAM frequency %d MHz\n", bd->dram_freq);
+		return -EINVAL;
+	}
+
+	for (ch = 0; ch < DRAM_CH_NR; ch++) {
+		unsigned long size = bd->dram_ch[ch].size;
+		unsigned int width = bd->dram_ch[ch].width;
+
+		if (size) {
+			ret = umc_ch_init(umc_ch_base, freq,
+					  size / (width / 16), width, ch);
+			if (ret) {
+				pr_err("failed to initialize UMC ch%d\n", ch);
+				return ret;
+			}
+		}
+
+		umc_ch_base += 0x00200000;
+	}
+
+	um_init(um_base);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/umc-regs.h b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-regs.h
new file mode 100644
index 000000000..02efab384
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-regs.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UniPhier UMC (Universal Memory Controller) registers
+ *
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ */
+
+#ifndef ARCH_UMC_REGS_H
+#define ARCH_UMC_REGS_H
+
+#include <linux/bitops.h>
+
+#define UMC_CPURST		0x00000700
+#define UMC_IDSRST		0x0000070C
+#define UMC_IXMRST		0x00000714
+#define UMC_HDMRST		0x00000718
+#define UMC_MDMRST		0x0000071C
+#define UMC_HDDRST		0x00000720
+#define UMC_MDDRST		0x00000724
+#define UMC_SIORST		0x00000728
+#define UMC_GIORST		0x0000072C
+#define UMC_HD2RST		0x00000734
+#define UMC_VIORST		0x0000073C
+#define UMC_FRCRST		0x00000748 /* LD4/sLD8 */
+#define UMC_DVCRST		0x00000748 /* Pro4 */
+#define UMC_RGLRST		0x00000750
+#define UMC_VPERST		0x00000758
+#define UMC_AIORST		0x00000764
+#define UMC_DMDRST		0x00000770
+
+#define UMC_HDMCHSEL		0x00000898
+#define UMC_MDMCHSEL		0x0000089C
+#define UMC_DVCCHSEL		0x000008C8
+#define UMC_DMDCHSEL		0x000008F0
+
+#define UMC_CLKEN_SSIF_FETCH	0x0000C060
+#define UMC_CLKEN_SSIF_COMQUE0	0x0000C064
+#define UMC_CLKEN_SSIF_COMWC0	0x0000C068
+#define UMC_CLKEN_SSIF_COMRC0	0x0000C06C
+#define UMC_CLKEN_SSIF_COMQUE1	0x0000C070
+#define UMC_CLKEN_SSIF_COMWC1	0x0000C074
+#define UMC_CLKEN_SSIF_COMRC1	0x0000C078
+#define UMC_CLKEN_SSIF_WC	0x0000C07C
+#define UMC_CLKEN_SSIF_RC	0x0000C080
+#define UMC_CLKEN_SSIF_DST	0x0000C084
+
+#define UMC_CMDCTLA		0x00000000
+#define UMC_CMDCTLB		0x00000004
+#define UMC_INITSET		0x00000014
+#define   UMC_INITSET_INIT1EN		BIT(1)	/* init without power-on wait */
+#define   UMC_INITSET_INIT0EN		BIT(0)	/* init with power-on wait */
+#define UMC_INITSTAT		0x00000018
+#define   UMC_INITSTAT_INIT1ST		BIT(1)	/* init without power-on wait */
+#define   UMC_INITSTAT_INIT0ST		BIT(0)	/* init with power-on wait */
+#define UMC_SPCCTLA		0x00000030
+#define UMC_SPCCTLB		0x00000034
+#define UMC_SPCSETA		0x00000038
+#define UMC_SPCSETB		0x0000003C
+#define   UMC_SPCSETB_AREFMD_MASK	(0x3)	/* Auto Refresh Mode */
+#define   UMC_SPCSETB_AREFMD_ARB	(0x0)	/* control by arbitor */
+#define   UMC_SPCSETB_AREFMD_CONT	(0x1)	/* control by DRAMCONT */
+#define   UMC_SPCSETB_AREFMD_REG	(0x2)	/* control by register */
+#define UMC_SPCSETC		0x00000040
+#define UMC_SPCSETD		0x00000044
+#define UMC_SPCSTATA		0x00000050
+#define UMC_SPCSTATB		0x00000054
+#define UMC_SPCSTATC		0x00000058
+#define UMC_ACSSETA		0x00000060
+#define UMC_FLOWCTLA		0x00000400
+#define UMC_FLOWCTLB		0x00000404
+#define UMC_FLOWCTLC		0x00000408
+#define UMC_FLOWCTLG		0x00000508
+#define UMC_FLOWCTLOB0		0x00000520
+#define UMC_FLOWCTLOB1		0x00000524
+#define UMC_RDATACTL_D0		0x00000600
+#define   UMC_RDATACTL_RADLTY_SHIFT	4
+#define   UMC_RDATACTL_RADLTY_MASK	(0xf << (UMC_RDATACTL_RADLTY_SHIFT))
+#define   UMC_RDATACTL_RAD2LTY_SHIFT	8
+#define   UMC_RDATACTL_RAD2LTY_MASK	(0xf << (UMC_RDATACTL_RAD2LTY_SHIFT))
+#define UMC_WDATACTL_D0		0x00000604
+#define UMC_RDATACTL_D1		0x00000608
+#define UMC_WDATACTL_D1		0x0000060C
+#define UMC_DATASET		0x00000610
+#define UMC_RESPCTL		0x00000624
+#define UMC_DCCGCTL		0x00000720
+#define UMC_DICGCTLA		0x00000724
+#define UMC_DICGCTLB		0x00000728
+#define UMC_ERRMASKA		0x00000958
+#define UMC_ERRMASKB		0x0000095c
+#define UMC_BSICMAPSET		0x00000988
+#define UMC_DIOCTLA		0x00000C00
+#define   UMC_DIOCTLA_CTL_NRST		BIT(8)	/* ctl_rst_n */
+#define   UMC_DIOCTLA_CFG_NRST		BIT(0)	/* cfg_rst_n */
+#define UMC_DFICUPDCTLA		0x00000C20
+
+/* UM registers */
+#define UMC_MBUS0		0x00080004
+#define UMC_MBUS1		0x00081004
+#define UMC_MBUS2		0x00082004
+#define UMC_MBUS3		0x00083004
+
+/* UD registers */
+#define UMC_BITPERPIXELMODE_D0	0x010
+#define UMC_PAIR1DOFF_D0	0x054
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram/umc-sld8.c b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-sld8.c
new file mode 100644
index 000000000..a11586952
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram/umc-sld8.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <asm/processor.h>
+
+#include "../init.h"
+#include "ddrphy-init.h"
+#include "umc-regs.h"
+
+#define DRAM_CH_NR	2
+
+enum dram_freq {
+	DRAM_FREQ_1333M,
+	DRAM_FREQ_1600M,
+	DRAM_FREQ_NR,
+};
+
+enum dram_size {
+	DRAM_SZ_128M,
+	DRAM_SZ_256M,
+	DRAM_SZ_512M,
+	DRAM_SZ_NR,
+};
+
+static u32 umc_cmdctla[DRAM_FREQ_NR] = {0x55990b11, 0x66bb0f17};
+static u32 umc_cmdctla_plus[DRAM_FREQ_NR] = {0x45990b11, 0x46bb0f17};
+static u32 umc_cmdctlb[DRAM_FREQ_NR] = {0x16958944, 0x18c6ab44};
+static u32 umc_cmdctlb_plus[DRAM_FREQ_NR] = {0x16958924, 0x18c6ab24};
+static u32 umc_spcctla[DRAM_FREQ_NR][DRAM_SZ_NR] = {
+	{0x00240512, 0x00350512, 0x00000000}, /* no data for 1333MHz,128MB */
+	{0x002b0617, 0x003f0617, 0x00670617},
+};
+static u32 umc_spcctlb[DRAM_FREQ_NR] = {0x00ff0006, 0x00ff0008};
+static u32 umc_rdatactl[DRAM_FREQ_NR] = {0x000a00ac, 0x000c00ac};
+
+static int umc_get_rank(int ch)
+{
+	return ch;	/* ch0: rank0, ch1: rank1 for this SoC */
+}
+
+static void umc_start_ssif(void __iomem *ssif_base)
+{
+	writel(0x00000000, ssif_base + 0x0000b004);
+	writel(0xffffffff, ssif_base + 0x0000c004);
+	writel(0x000fffcf, ssif_base + 0x0000c008);
+	writel(0x00000001, ssif_base + 0x0000b000);
+	writel(0x00000001, ssif_base + 0x0000c000);
+	writel(0x03010101, ssif_base + UMC_MDMCHSEL);
+	writel(0x03010100, ssif_base + UMC_DMDCHSEL);
+
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
+	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
+
+	writel(0x00000001, ssif_base + UMC_CPURST);
+	writel(0x00000001, ssif_base + UMC_IDSRST);
+	writel(0x00000001, ssif_base + UMC_IXMRST);
+	writel(0x00000001, ssif_base + UMC_MDMRST);
+	writel(0x00000001, ssif_base + UMC_MDDRST);
+	writel(0x00000001, ssif_base + UMC_SIORST);
+	writel(0x00000001, ssif_base + UMC_VIORST);
+	writel(0x00000001, ssif_base + UMC_FRCRST);
+	writel(0x00000001, ssif_base + UMC_RGLRST);
+	writel(0x00000001, ssif_base + UMC_AIORST);
+	writel(0x00000001, ssif_base + UMC_DMDRST);
+}
+
+static int umc_dramcont_init(void __iomem *dc_base, void __iomem *ca_base,
+			     int freq, unsigned long size, bool ddr3plus)
+{
+	enum dram_freq freq_e;
+	enum dram_size size_e;
+
+	switch (freq) {
+	case 1333:
+		freq_e = DRAM_FREQ_1333M;
+		break;
+	case 1600:
+		freq_e = DRAM_FREQ_1600M;
+		break;
+	default:
+		pr_err("unsupported DRAM frequency %d MHz\n", freq);
+		return -EINVAL;
+	}
+
+	switch (size) {
+	case 0:
+		return 0;
+	case SZ_128M:
+		size_e = DRAM_SZ_128M;
+		break;
+	case SZ_256M:
+		size_e = DRAM_SZ_256M;
+		break;
+	case SZ_512M:
+		size_e = DRAM_SZ_512M;
+		break;
+	default:
+		pr_err("unsupported DRAM size 0x%08lx\n", size);
+		return -EINVAL;
+	}
+
+	writel((ddr3plus ? umc_cmdctla_plus : umc_cmdctla)[freq_e],
+	       dc_base + UMC_CMDCTLA);
+	writel((ddr3plus ? umc_cmdctlb_plus : umc_cmdctlb)[freq_e],
+	       dc_base + UMC_CMDCTLB);
+	writel(umc_spcctla[freq_e][size_e], dc_base + UMC_SPCCTLA);
+	writel(umc_spcctlb[freq_e], dc_base + UMC_SPCCTLB);
+	writel(umc_rdatactl[freq_e], dc_base + UMC_RDATACTL_D0);
+	writel(0x04060806, dc_base + UMC_WDATACTL_D0);
+	writel(0x04a02000, dc_base + UMC_DATASET);
+	writel(0x00000000, ca_base + 0x2300);
+	writel(0x00400020, dc_base + UMC_DCCGCTL);
+	writel(0x00000003, dc_base + 0x7000);
+	writel(0x0000004f, dc_base + 0x8000);
+	writel(0x000000c3, dc_base + 0x8004);
+	writel(0x00000077, dc_base + 0x8008);
+	writel(0x0000003b, dc_base + UMC_DICGCTLA);
+	writel(0x020a0808, dc_base + UMC_DICGCTLB);
+	writel(0x00000004, dc_base + UMC_FLOWCTLG);
+	writel(0x80000201, ca_base + 0xc20);
+	writel(0x0801e01e, dc_base + UMC_FLOWCTLA);
+	writel(0x00200000, dc_base + UMC_FLOWCTLB);
+	writel(0x00004444, dc_base + UMC_FLOWCTLC);
+	writel(0x200a0a00, dc_base + UMC_SPCSETB);
+	writel(0x00000000, dc_base + UMC_SPCSETD);
+	writel(0x00000520, dc_base + UMC_DFICUPDCTLA);
+
+	return 0;
+}
+
+static int umc_ch_init(void __iomem *dc_base, void __iomem *ca_base,
+		       int freq, unsigned long size, bool ddr3plus, int ch)
+{
+	void __iomem *phy_base = dc_base + 0x00001000;
+	int ret;
+
+	writel(UMC_INITSET_INIT1EN, dc_base + UMC_INITSET);
+	while (readl(dc_base + UMC_INITSTAT) & UMC_INITSTAT_INIT1ST)
+		cpu_relax();
+
+	writel(0x00000101, dc_base + UMC_DIOCTLA);
+
+	ret = uniphier_ld4_ddrphy_init(phy_base, freq, ddr3plus);
+	if (ret)
+		return ret;
+
+	ddrphy_prepare_training(phy_base, umc_get_rank(ch));
+	ret = ddrphy_training(phy_base);
+	if (ret)
+		return ret;
+
+	return umc_dramcont_init(dc_base, ca_base, freq, size, ddr3plus);
+}
+
+int uniphier_sld8_umc_init(const struct uniphier_board_data *bd)
+{
+	void __iomem *umc_base = (void __iomem *)0x5b800000;
+	void __iomem *ca_base = umc_base + 0x00001000;
+	void __iomem *dc_base = umc_base + 0x00400000;
+	void __iomem *ssif_base = umc_base;
+	int ch, ret;
+
+	for (ch = 0; ch < DRAM_CH_NR; ch++) {
+		ret = umc_ch_init(dc_base, ca_base, bd->dram_freq,
+				  bd->dram_ch[ch].size,
+				  !!(bd->flags & UNIPHIER_BD_DDR3PLUS), ch);
+		if (ret) {
+			pr_err("failed to initialize UMC ch%d\n", ch);
+			return ret;
+		}
+
+		ca_base += 0x00001000;
+		dc_base += 0x00200000;
+	}
+
+	umc_start_ssif(ssif_base);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/dram_init.c b/roms/u-boot/arch/arm/mach-uniphier/dram_init.c
new file mode 100644
index 000000000..7f2753190
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/dram_init.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012-2015 Panasonic Corporation
+ * Copyright (C) 2015-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <init.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/sizes.h>
+#include <asm/global_data.h>
+#include <asm/u-boot.h>
+
+#include "init.h"
+#include "sg-regs.h"
+#include "soc-info.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct uniphier_dram_map {
+	unsigned long base;
+	unsigned long size;
+};
+
+static int uniphier_memconf_decode(struct uniphier_dram_map *dram_map,
+				   unsigned long sparse_ch1_base, bool have_ch2)
+{
+	unsigned long size;
+	u32 val;
+
+	val = readl(sg_base + SG_MEMCONF);
+
+	/* set up ch0 */
+	dram_map[0].base = 0x80000000;
+
+	switch (val & SG_MEMCONF_CH0_SZ_MASK) {
+	case SG_MEMCONF_CH0_SZ_64M:
+		size = SZ_64M;
+		break;
+	case SG_MEMCONF_CH0_SZ_128M:
+		size = SZ_128M;
+		break;
+	case SG_MEMCONF_CH0_SZ_256M:
+		size = SZ_256M;
+		break;
+	case SG_MEMCONF_CH0_SZ_512M:
+		size = SZ_512M;
+		break;
+	case SG_MEMCONF_CH0_SZ_1G:
+		size = SZ_1G;
+		break;
+	default:
+		pr_err("error: invalid value is set to MEMCONF ch0 size\n");
+		return -EINVAL;
+	}
+
+	if ((val & SG_MEMCONF_CH0_NUM_MASK) == SG_MEMCONF_CH0_NUM_2)
+		size *= 2;
+
+	dram_map[0].size = size;
+
+	/* set up ch1 */
+	dram_map[1].base = dram_map[0].base + size;
+
+	if (val & SG_MEMCONF_SPARSEMEM) {
+		if (dram_map[1].base > sparse_ch1_base) {
+			pr_warn("Sparse mem is enabled, but ch0 and ch1 overlap\n");
+			pr_warn("Only ch0 is available\n");
+			dram_map[1].base = 0;
+			return 0;
+		}
+
+		dram_map[1].base = sparse_ch1_base;
+	}
+
+	switch (val & SG_MEMCONF_CH1_SZ_MASK) {
+	case SG_MEMCONF_CH1_SZ_64M:
+		size = SZ_64M;
+		break;
+	case SG_MEMCONF_CH1_SZ_128M:
+		size = SZ_128M;
+		break;
+	case SG_MEMCONF_CH1_SZ_256M:
+		size = SZ_256M;
+		break;
+	case SG_MEMCONF_CH1_SZ_512M:
+		size = SZ_512M;
+		break;
+	case SG_MEMCONF_CH1_SZ_1G:
+		size = SZ_1G;
+		break;
+	default:
+		pr_err("error: invalid value is set to MEMCONF ch1 size\n");
+		return -EINVAL;
+	}
+
+	if ((val & SG_MEMCONF_CH1_NUM_MASK) == SG_MEMCONF_CH1_NUM_2)
+		size *= 2;
+
+	dram_map[1].size = size;
+
+	if (!have_ch2 || val & SG_MEMCONF_CH2_DISABLE)
+		return 0;
+
+	/* set up ch2 */
+	dram_map[2].base = dram_map[1].base + size;
+
+	switch (val & SG_MEMCONF_CH2_SZ_MASK) {
+	case SG_MEMCONF_CH2_SZ_64M:
+		size = SZ_64M;
+		break;
+	case SG_MEMCONF_CH2_SZ_128M:
+		size = SZ_128M;
+		break;
+	case SG_MEMCONF_CH2_SZ_256M:
+		size = SZ_256M;
+		break;
+	case SG_MEMCONF_CH2_SZ_512M:
+		size = SZ_512M;
+		break;
+	case SG_MEMCONF_CH2_SZ_1G:
+		size = SZ_1G;
+		break;
+	default:
+		pr_err("error: invalid value is set to MEMCONF ch2 size\n");
+		return -EINVAL;
+	}
+
+	if ((val & SG_MEMCONF_CH2_NUM_MASK) == SG_MEMCONF_CH2_NUM_2)
+		size *= 2;
+
+	dram_map[2].size = size;
+
+	return 0;
+}
+
+static int uniphier_ld4_dram_map_get(struct uniphier_dram_map dram_map[])
+{
+	return uniphier_memconf_decode(dram_map, 0xc0000000, false);
+}
+
+static int uniphier_pro4_dram_map_get(struct uniphier_dram_map dram_map[])
+{
+	return uniphier_memconf_decode(dram_map, 0xa0000000, false);
+}
+
+static int uniphier_pxs2_dram_map_get(struct uniphier_dram_map dram_map[])
+{
+	return uniphier_memconf_decode(dram_map, 0xc0000000, true);
+}
+
+struct uniphier_dram_init_data {
+	unsigned int soc_id;
+	int (*dram_map_get)(struct uniphier_dram_map dram_map[]);
+};
+
+static const struct uniphier_dram_init_data uniphier_dram_init_data[] = {
+	{
+		.soc_id = UNIPHIER_LD4_ID,
+		.dram_map_get = uniphier_ld4_dram_map_get,
+	},
+	{
+		.soc_id = UNIPHIER_PRO4_ID,
+		.dram_map_get = uniphier_pro4_dram_map_get,
+	},
+	{
+		.soc_id = UNIPHIER_SLD8_ID,
+		.dram_map_get = uniphier_ld4_dram_map_get,
+	},
+	{
+		.soc_id = UNIPHIER_PRO5_ID,
+		.dram_map_get = uniphier_ld4_dram_map_get,
+	},
+	{
+		.soc_id = UNIPHIER_PXS2_ID,
+		.dram_map_get = uniphier_pxs2_dram_map_get,
+	},
+	{
+		.soc_id = UNIPHIER_LD6B_ID,
+		.dram_map_get = uniphier_pxs2_dram_map_get,
+	},
+	{
+		.soc_id = UNIPHIER_LD11_ID,
+		.dram_map_get = uniphier_ld4_dram_map_get,
+	},
+	{
+		.soc_id = UNIPHIER_LD20_ID,
+		.dram_map_get = uniphier_pxs2_dram_map_get,
+	},
+	{
+		.soc_id = UNIPHIER_PXS3_ID,
+		.dram_map_get = uniphier_pxs2_dram_map_get,
+	},
+};
+UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_dram_init_data,
+			     uniphier_dram_init_data)
+
+static int uniphier_dram_map_get(struct uniphier_dram_map *dram_map)
+{
+	const struct uniphier_dram_init_data *data;
+
+	data = uniphier_get_dram_init_data();
+	if (!data) {
+		pr_err("unsupported SoC\n");
+		return -ENOTSUPP;
+	}
+
+	return data->dram_map_get(dram_map);
+}
+
+int dram_init(void)
+{
+	struct uniphier_dram_map dram_map[3] = {};
+	bool valid_bank_found = false;
+	unsigned long prev_top;
+	int ret, i;
+
+	gd->ram_size = 0;
+
+	ret = uniphier_dram_map_get(dram_map);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(dram_map); i++) {
+		unsigned long max_size;
+
+		if (!dram_map[i].size)
+			continue;
+
+		/*
+		 * U-Boot relocates itself to the tail of the memory region,
+		 * but it does not expect sparse memory.  We use the first
+		 * contiguous chunk here.
+		 */
+		if (valid_bank_found && prev_top < dram_map[i].base)
+			break;
+
+		/*
+		 * Do not use memory that exceeds 32bit address range.  U-Boot
+		 * relocates itself to the end of the effectively available RAM.
+		 * This could be a problem for DMA engines that do not support
+		 * 64bit address (SDMA of SDHCI, UniPhier AV-ether, etc.)
+		 */
+		if (dram_map[i].base >= 1ULL << 32)
+			break;
+
+		max_size = (1ULL << 32) - dram_map[i].base;
+
+		gd->ram_size = min(dram_map[i].size, max_size);
+
+		if (!valid_bank_found)
+			gd->ram_base = dram_map[i].base;
+
+		prev_top = dram_map[i].base + dram_map[i].size;
+		valid_bank_found = true;
+	}
+
+	/*
+	 * LD20 uses the last 64 byte for each channel for dynamic
+	 * DDR PHY training
+	 */
+	if (uniphier_get_soc_id() == UNIPHIER_LD20_ID)
+		gd->ram_size -= 64;
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	struct uniphier_dram_map dram_map[3] = {};
+	unsigned long base, top;
+	bool valid_bank_found = false;
+	int ret, i;
+
+	ret = uniphier_dram_map_get(dram_map);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(dram_map); i++) {
+		if (i < ARRAY_SIZE(gd->bd->bi_dram)) {
+			gd->bd->bi_dram[i].start = dram_map[i].base;
+			gd->bd->bi_dram[i].size = dram_map[i].size;
+		}
+
+		if (!dram_map[i].size)
+			continue;
+
+		if (!valid_bank_found)
+			base = dram_map[i].base;
+		top = dram_map[i].base + dram_map[i].size;
+		valid_bank_found = true;
+	}
+
+	if (!valid_bank_found)
+		return -EINVAL;
+
+	/* map all the DRAM regions */
+	uniphier_mem_map_init(base, top - base);
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/fdt-fixup.c b/roms/u-boot/arch/arm/mach-uniphier/fdt-fixup.c
new file mode 100644
index 000000000..dfa32fdd4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/fdt-fixup.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016-2018 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <fdt_support.h>
+#include <fdtdec.h>
+#include <jffs2/load_kernel.h>
+#include <mtd_node.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+
+#include "soc-info.h"
+
+/*
+ * The DRAM PHY requires 64 byte scratch area in each DRAM channel
+ * for its dynamic PHY training feature.
+ */
+static int uniphier_ld20_fdt_mem_rsv(void *fdt, struct bd_info *bd)
+{
+	unsigned long rsv_addr;
+	const unsigned long rsv_size = 64;
+	int i, ret;
+
+	if (!IS_ENABLED(CONFIG_ARCH_UNIPHIER_LD20) ||
+	    uniphier_get_soc_id() != UNIPHIER_LD20_ID)
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(bd->bi_dram); i++) {
+		if (!bd->bi_dram[i].size)
+			continue;
+
+		rsv_addr = bd->bi_dram[i].start + bd->bi_dram[i].size;
+		rsv_addr -= rsv_size;
+
+		ret = fdt_add_mem_rsv(fdt, rsv_addr, rsv_size);
+		if (ret)
+			return -ENOSPC;
+
+		pr_notice("   Reserved memory region for DRAM PHY training: addr=%lx size=%lx\n",
+			  rsv_addr, rsv_size);
+	}
+
+	return 0;
+}
+
+int ft_board_setup(void *fdt, struct bd_info *bd)
+{
+	static const struct node_info nodes[] = {
+		{ "socionext,uniphier-denali-nand-v5a", MTD_DEV_TYPE_NAND },
+		{ "socionext,uniphier-denali-nand-v5b", MTD_DEV_TYPE_NAND },
+	};
+	int ret;
+
+	fdt_fixup_mtdparts(fdt, nodes, ARRAY_SIZE(nodes));
+
+	ret = uniphier_ld20_fdt_mem_rsv(fdt, bd);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/init.h b/roms/u-boot/arch/arm/mach-uniphier/init.h
new file mode 100644
index 000000000..535c06343
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/init.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef __MACH_INIT_H
+#define __MACH_INIT_H
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+
+#define UNIPHIER_MAX_NR_DRAM_CH		3
+
+struct uniphier_dram_ch {
+	unsigned long size;
+	unsigned int width;
+};
+
+struct uniphier_board_data {
+	unsigned int dram_freq;
+	struct uniphier_dram_ch dram_ch[UNIPHIER_MAX_NR_DRAM_CH];
+	unsigned int flags;
+
+#define UNIPHIER_BD_DRAM_SPARSE			BIT(9)
+#define UNIPHIER_BD_DDR3PLUS			BIT(8)
+};
+
+const struct uniphier_board_data *uniphier_get_board_param(void);
+
+int uniphier_ld4_init(const struct uniphier_board_data *bd);
+int uniphier_pro4_init(const struct uniphier_board_data *bd);
+int uniphier_sld8_init(const struct uniphier_board_data *bd);
+int uniphier_pro5_init(const struct uniphier_board_data *bd);
+int uniphier_pxs2_init(const struct uniphier_board_data *bd);
+
+void uniphier_ld4_bcu_init(const struct uniphier_board_data *bd);
+
+int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd);
+int uniphier_memconf_3ch_init(const struct uniphier_board_data *bd);
+
+int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd);
+int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd);
+int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd);
+int uniphier_pro5_dpll_init(const struct uniphier_board_data *bd);
+int uniphier_pxs2_dpll_init(const struct uniphier_board_data *bd);
+
+void uniphier_ld4_early_clk_init(void);
+
+void uniphier_ld4_dram_clk_init(void);
+void uniphier_pro5_dram_clk_init(void);
+void uniphier_pxs2_dram_clk_init(void);
+
+int uniphier_ld4_umc_init(const struct uniphier_board_data *bd);
+int uniphier_pro4_umc_init(const struct uniphier_board_data *bd);
+int uniphier_sld8_umc_init(const struct uniphier_board_data *bd);
+int uniphier_pro5_umc_init(const struct uniphier_board_data *bd);
+int uniphier_pxs2_umc_init(const struct uniphier_board_data *bd);
+
+void uniphier_ld4_pll_init(void);
+void uniphier_pro4_pll_init(void);
+void uniphier_ld11_pll_init(void);
+void uniphier_ld20_pll_init(void);
+void uniphier_pxs3_pll_init(void);
+
+void uniphier_pro4_clk_init(void);
+void uniphier_pro5_clk_init(void);
+void uniphier_pxs2_clk_init(void);
+void uniphier_ld11_clk_init(void);
+void uniphier_ld20_clk_init(void);
+void uniphier_pxs3_clk_init(void);
+
+unsigned int uniphier_boot_device_raw(void);
+int uniphier_have_internal_stm(void);
+int uniphier_boot_from_backend(void);
+
+#ifdef CONFIG_ARM64
+void uniphier_mem_map_init(unsigned long dram_base, unsigned long dram_size);
+#else
+static inline void uniphier_mem_map_init(unsigned long dram_base,
+					 unsigned long dram_size)
+{
+}
+#endif
+
+#endif /* __MACH_INIT_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/memconf.c b/roms/u-boot/arch/arm/mach-uniphier/memconf.c
new file mode 100644
index 000000000..57192f015
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/memconf.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2016      Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+#include "sg-regs.h"
+#include "init.h"
+
+static int __uniphier_memconf_init(const struct uniphier_board_data *bd,
+				   int have_ch2)
+{
+	u32 val = 0;
+	unsigned long size_per_word;
+
+	/* set up ch0 */
+	switch (bd->dram_ch[0].width) {
+	case 16:
+		val |= SG_MEMCONF_CH0_NUM_1;
+		size_per_word = bd->dram_ch[0].size;
+		break;
+	case 32:
+		val |= SG_MEMCONF_CH0_NUM_2;
+		size_per_word = bd->dram_ch[0].size >> 1;
+		break;
+	default:
+		pr_err("error: unsupported DRAM ch0 width\n");
+		return -EINVAL;
+	}
+
+	switch (size_per_word) {
+	case SZ_64M:
+		val |= SG_MEMCONF_CH0_SZ_64M;
+		break;
+	case SZ_128M:
+		val |= SG_MEMCONF_CH0_SZ_128M;
+		break;
+	case SZ_256M:
+		val |= SG_MEMCONF_CH0_SZ_256M;
+		break;
+	case SZ_512M:
+		val |= SG_MEMCONF_CH0_SZ_512M;
+		break;
+	case SZ_1G:
+		val |= SG_MEMCONF_CH0_SZ_1G;
+		break;
+	default:
+		pr_err("error: unsupported DRAM ch0 size\n");
+		return -EINVAL;
+	}
+
+	/* set up ch1 */
+	switch (bd->dram_ch[1].width) {
+	case 16:
+		val |= SG_MEMCONF_CH1_NUM_1;
+		size_per_word = bd->dram_ch[1].size;
+		break;
+	case 32:
+		val |= SG_MEMCONF_CH1_NUM_2;
+		size_per_word = bd->dram_ch[1].size >> 1;
+		break;
+	default:
+		pr_err("error: unsupported DRAM ch1 width\n");
+		return -EINVAL;
+	}
+
+	switch (size_per_word) {
+	case SZ_64M:
+		val |= SG_MEMCONF_CH1_SZ_64M;
+		break;
+	case SZ_128M:
+		val |= SG_MEMCONF_CH1_SZ_128M;
+		break;
+	case SZ_256M:
+		val |= SG_MEMCONF_CH1_SZ_256M;
+		break;
+	case SZ_512M:
+		val |= SG_MEMCONF_CH1_SZ_512M;
+		break;
+	case SZ_1G:
+		val |= SG_MEMCONF_CH1_SZ_1G;
+		break;
+	default:
+		pr_err("error: unsupported DRAM ch1 size\n");
+		return -EINVAL;
+	}
+
+	/* is sparse mem? */
+	if (bd->flags & UNIPHIER_BD_DRAM_SPARSE)
+		val |= SG_MEMCONF_SPARSEMEM;
+
+	if (!have_ch2)
+		goto out;
+
+	if (!bd->dram_ch[2].size) {
+		val |= SG_MEMCONF_CH2_DISABLE;
+		goto out;
+	}
+
+	/* set up ch2 */
+	switch (bd->dram_ch[2].width) {
+	case 16:
+		val |= SG_MEMCONF_CH2_NUM_1;
+		size_per_word = bd->dram_ch[2].size;
+		break;
+	case 32:
+		val |= SG_MEMCONF_CH2_NUM_2;
+		size_per_word = bd->dram_ch[2].size >> 1;
+		break;
+	default:
+		pr_err("error: unsupported DRAM ch2 width\n");
+		return -EINVAL;
+	}
+
+	switch (size_per_word) {
+	case SZ_64M:
+		val |= SG_MEMCONF_CH2_SZ_64M;
+		break;
+	case SZ_128M:
+		val |= SG_MEMCONF_CH2_SZ_128M;
+		break;
+	case SZ_256M:
+		val |= SG_MEMCONF_CH2_SZ_256M;
+		break;
+	case SZ_512M:
+		val |= SG_MEMCONF_CH2_SZ_512M;
+		break;
+	case SZ_1G:
+		val |= SG_MEMCONF_CH2_SZ_1G;
+		break;
+	default:
+		pr_err("error: unsupported DRAM ch2 size\n");
+		return -EINVAL;
+	}
+
+out:
+	writel(val, sg_base + SG_MEMCONF);
+
+	return 0;
+}
+
+int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd)
+{
+	return __uniphier_memconf_init(bd, 0);
+}
+
+int uniphier_memconf_3ch_init(const struct uniphier_board_data *bd)
+{
+	return __uniphier_memconf_init(bd, 1);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/micro-support-card.c b/roms/u-boot/arch/arm/mach-uniphier/micro-support-card.c
new file mode 100644
index 000000000..95780f79c
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/micro-support-card.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012-2015 Panasonic Corporation
+ * Copyright (C) 2015-2020 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <dm.h>
+#include <fdt_support.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/global_data.h>
+
+#include "micro-support-card.h"
+
+#define SMC911X_OFFSET			0x00000
+#define LED_OFFSET			0x90000
+#define NS16550A_OFFSET			0xb0000
+#define MICRO_SUPPORT_CARD_RESET	0xd0034
+#define MICRO_SUPPORT_CARD_REVISION	0xd00e0
+
+static bool support_card_found;
+static void __iomem *support_card_base;
+
+static void support_card_detect(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	const void *fdt = gd->fdt_blob;
+	int offset;
+	u64 addr, addr2;
+
+	offset = fdt_node_offset_by_compatible(fdt, 0, "smsc,lan9118");
+	if (offset < 0)
+		return;
+
+	addr = fdt_get_base_address(fdt, offset);
+	if (addr == OF_BAD_ADDR)
+		return;
+	addr -= SMC911X_OFFSET;
+
+	offset = fdt_node_offset_by_compatible(fdt, 0, "ns16550a");
+	if (offset < 0)
+		return;
+
+	addr2 = fdt_get_base_address(fdt, offset);
+	if (addr2 == OF_BAD_ADDR)
+		return;
+	addr2 -= NS16550A_OFFSET;
+
+	/* sanity check */
+	if (addr != addr2)
+		return;
+
+	support_card_base = ioremap(addr, 0x100000);
+
+	support_card_found = true;
+}
+
+/*
+ * 0: reset deassert, 1: reset
+ *
+ * bit[0]: LAN, I2C, LED
+ * bit[1]: UART
+ */
+static void support_card_reset_deassert(void)
+{
+	writel(0x00010000, support_card_base + MICRO_SUPPORT_CARD_RESET);
+}
+
+static void support_card_reset(void)
+{
+	writel(0x00020003, support_card_base + MICRO_SUPPORT_CARD_RESET);
+}
+
+static int support_card_show_revision(void)
+{
+	u32 revision;
+
+	revision = readl(support_card_base + MICRO_SUPPORT_CARD_REVISION);
+	revision &= 0xff;
+
+	/* revision 3.6.x card changed the revision format */
+	printf("SC:    Micro Support Card (CPLD version %s%d.%d)\n",
+	       revision >> 4 == 6 ? "3." : "",
+	       revision >> 4, revision & 0xf);
+
+	return 0;
+}
+
+void support_card_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	/* The system bus must be initialized for access to the support card. */
+	ret = uclass_get_device_by_driver(UCLASS_SIMPLE_BUS,
+					  DM_DRIVER_GET(uniphier_system_bus_driver),
+					  &dev);
+	if (ret)
+		return;
+
+	/* Check DT to see if this board has the support card. */
+	support_card_detect();
+
+	if (!support_card_found)
+		return;
+
+	support_card_reset();
+	/*
+	 * After power on, we need to keep the LAN controller in reset state
+	 * for a while. (200 usec)
+	 */
+	udelay(200);
+	support_card_reset_deassert();
+
+	support_card_show_revision();
+}
+
+static const u8 ledval_num[] = {
+	0x7e, /* 0 */
+	0x0c, /* 1 */
+	0xb6, /* 2 */
+	0x9e, /* 3 */
+	0xcc, /* 4 */
+	0xda, /* 5 */
+	0xfa, /* 6 */
+	0x4e, /* 7 */
+	0xfe, /* 8 */
+	0xde, /* 9 */
+};
+
+static const u8 ledval_alpha[] = {
+	0xee, /* A */
+	0xf8, /* B */
+	0x72, /* C */
+	0xbc, /* D */
+	0xf2, /* E */
+	0xe2, /* F */
+	0x7a, /* G */
+	0xe8, /* H */
+	0x08, /* I */
+	0x3c, /* J */
+	0xea, /* K */
+	0x70, /* L */
+	0x6e, /* M */
+	0xa8, /* N */
+	0xb8, /* O */
+	0xe6, /* P */
+	0xce, /* Q */
+	0xa0, /* R */
+	0xc8, /* S */
+	0x8c, /* T */
+	0x7c, /* U */
+	0x54, /* V */
+	0xfc, /* W */
+	0xec, /* X */
+	0xdc, /* Y */
+	0xa4, /* Z */
+};
+
+static u8 char2ledval(char c)
+{
+	if (isdigit(c))
+		return ledval_num[c - '0'];
+	else if (isalpha(c))
+		return ledval_alpha[toupper(c) - 'A'];
+
+	return 0;
+}
+
+void led_puts(const char *s)
+{
+	int i;
+	u32 val = 0;
+
+	if (!support_card_found)
+		return;
+
+	if (!s)
+		return;
+
+	for (i = 0; i < 4; i++) {
+		val <<= 8;
+		val |= char2ledval(*s);
+		if (*s != '\0')
+			s++;
+	}
+
+	writel(~val, support_card_base + LED_OFFSET);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/micro-support-card.h b/roms/u-boot/arch/arm/mach-uniphier/micro-support-card.h
new file mode 100644
index 000000000..a5a94f8ed
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/micro-support-card.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef MICRO_SUPPORT_CARD_H
+#define MICRO_SUPPORT_CARD_H
+
+#if defined(CONFIG_MICRO_SUPPORT_CARD)
+void support_card_init(void);
+void support_card_late_init(void);
+void led_puts(const char *s);
+#else
+static inline void support_card_init(void)
+{
+}
+
+static inline void support_card_late_init(void)
+{
+}
+
+static inline void led_puts(const char *s)
+{
+}
+#endif
+
+#endif /* MICRO_SUPPORT_CARD_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/mmc-boot-mode.c b/roms/u-boot/arch/arm/mach-uniphier/mmc-boot-mode.c
new file mode 100644
index 000000000..e47e5df64
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/mmc-boot-mode.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <mmc.h>
+#include <spl.h>
+
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+	struct mmc *mmc;
+
+	/*
+	 * work around a bug in the Boot ROM of LD4, Pro4, and sLD8:
+	 *
+	 * The boot ROM in these SoCs breaks the PARTITION_CONFIG [179] of
+	 * Extended CSD register; when switching to the Boot Partition 1, the
+	 * Boot ROM should issue the SWITCH command (CMD6) with Set Bits for
+	 * the Access Bits, but in fact it uses Write Byte for the Access Bits.
+	 * As a result, the BOOT_PARTITION_ENABLE field of the PARTITION_CONFIG
+	 * is lost.  This bug was fixed for PH1-Pro5 and later SoCs.
+	 *
+	 * Fixup mmc->part_config here because it is used to determine the
+	 * partition which the U-Boot image is read from.
+	 */
+	mmc = find_mmc_device(0);
+	mmc->part_config &= ~EXT_CSD_BOOT_PART_NUM(PART_ACCESS_MASK);
+	mmc->part_config |= EXT_CSD_BOOT_PARTITION_ENABLE;
+
+	return MMCSD_MODE_EMMCBOOT;
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/mmc-first-dev.c b/roms/u-boot/arch/arm/mach-uniphier/mmc-first-dev.c
new file mode 100644
index 000000000..45bb10f8e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/mmc-first-dev.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <command.h>
+#include <env.h>
+#include <mmc.h>
+#include <linux/errno.h>
+
+static int find_first_mmc_device(bool is_sd)
+{
+	struct mmc *mmc;
+	int i;
+
+	for (i = 0; (mmc = find_mmc_device(i)); i++) {
+		if (!mmc_init(mmc) &&
+		    ((is_sd && IS_SD(mmc)) || (!is_sd && IS_MMC(mmc))))
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+int mmc_get_env_dev(void)
+{
+	return find_first_mmc_device(false);
+}
+
+static int do_mmcsetn(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	int dev;
+
+	dev = find_first_mmc_device(false);
+	if (dev < 0)
+		return CMD_RET_FAILURE;
+
+	env_set_ulong("mmc_first_dev", dev);
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	   mmcsetn,	1,	1,	do_mmcsetn,
+	"Set the first MMC (not SD) dev number to \"mmc_first_dev\" environment",
+	""
+);
+
+static int do_sdsetn(struct cmd_tbl *cmdtp, int flag, int argc,
+		     char *const argv[])
+{
+	int dev;
+
+	dev = find_first_mmc_device(true);
+	if (dev < 0)
+		return CMD_RET_FAILURE;
+
+	env_set_ulong("sd_first_dev", dev);
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	sdsetn,	1,	1,	do_sdsetn,
+	"Set the first SD dev number to \"sd_first_dev\" environment",
+	""
+);
diff --git a/roms/u-boot/arch/arm/mach-uniphier/reset.c b/roms/u-boot/arch/arm/mach-uniphier/reset.c
new file mode 100644
index 000000000..dddb48ec4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/reset.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <cpu_func.h>
+#include <linux/io.h>
+#include <asm/secure.h>
+
+#include "sc-regs.h"
+
+/* If PSCI is enabled, this is used for SYSTEM_RESET function */
+#ifdef CONFIG_ARMV7_PSCI
+#define __SECURE	__secure
+#else
+#define __SECURE
+#endif
+
+void __SECURE reset_cpu(void)
+{
+	u32 tmp;
+
+	writel(5, sc_base + SC_IRQTIMSET); /* default value */
+
+	tmp  = readl(sc_base + SC_SLFRSTSEL);
+	tmp &= ~0x3; /* mask [1:0] */
+	tmp |= 0x0;  /* XRST reboot */
+	writel(tmp, sc_base + SC_SLFRSTSEL);
+
+	tmp = readl(sc_base + SC_SLFRSTCTL);
+	tmp |= 0x1;
+	writel(tmp, sc_base + SC_SLFRSTCTL);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/sc-regs.h b/roms/u-boot/arch/arm/mach-uniphier/sc-regs.h
new file mode 100644
index 000000000..e43116e06
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/sc-regs.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UniPhier SC (System Control) block registers
+ *
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef ARCH_SC_REGS_H
+#define ARCH_SC_REGS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#define sc_base			((void __iomem *)SC_BASE)
+#endif
+
+#define SC_BASE			0x61840000
+
+#define SC_DPLLCTRL		0x1200
+#define SC_DPLLCTRL_SSC_EN		(0x1 << 31)
+#define SC_DPLLCTRL_FOUTMODE_MASK        (0xf << 16)
+#define SC_DPLLCTRL_SSC_RATE		(0x1 << 15)
+
+#define SC_DPLLCTRL2		0x1204
+#define SC_DPLLCTRL2_NRSTDS		(0x1 << 28)
+
+#define SC_DPLLCTRL3		0x1208
+#define SC_DPLLCTRL3_LPFSEL_COEF2	(0x0 << 31)
+#define SC_DPLLCTRL3_LPFSEL_COEF3	(0x1 << 31)
+
+#define SC_UPLLCTRL		0x1210
+
+#define SC_VPLL27ACTRL		0x1270
+#define SC_VPLL27ACTRL2		0x1274
+#define SC_VPLL27ACTRL3		0x1278
+
+#define SC_VPLL27BCTRL		0x1290
+#define SC_VPLL27BCTRL2		0x1294
+#define SC_VPLL27BCTRL3		0x1298
+
+#define SC_RSTCTRL		0x2000
+#define SC_RSTCTRL_NRST_USB3B0		(0x1 << 17)	/* USB3 #0 bus */
+#define SC_RSTCTRL_NRST_USB3C0		(0x1 << 16)	/* USB3 #0 core */
+#define SC_RSTCTRL_NRST_ETHER		(0x1 << 12)
+#define SC_RSTCTRL_NRST_GIO		(0x1 <<  6)
+/* Pro4 or older */
+#define SC_RSTCTRL_NRST_UMC1		(0x1 <<  5)
+#define SC_RSTCTRL_NRST_UMC0		(0x1 <<  4)
+#define SC_RSTCTRL_NRST_NAND		(0x1 <<  2)
+
+#define SC_RSTCTRL2		0x2004
+#define SC_RSTCTRL2_NRST_USB3B1		(0x1 << 17)	/* USB3 #1 bus */
+#define SC_RSTCTRL2_NRST_USB3C1		(0x1 << 16)	/* USB3 #1 core */
+
+#define SC_RSTCTRL3		0x2008
+
+/* Pro5 or newer */
+#define SC_RSTCTRL4		0x200c
+#define SC_RSTCTRL4_NRST_UMCSB		(0x1 << 12)	/* UMC system bus */
+#define SC_RSTCTRL4_NRST_UMCA2		(0x1 << 10)	/* UMC ch2 standby */
+#define SC_RSTCTRL4_NRST_UMCA1		(0x1 <<  9)	/* UMC ch1 standby */
+#define SC_RSTCTRL4_NRST_UMCA0		(0x1 <<  8)	/* UMC ch0 standby */
+#define SC_RSTCTRL4_NRST_UMC32		(0x1 <<  6)	/* UMC ch2 */
+#define SC_RSTCTRL4_NRST_UMC31		(0x1 <<  5)	/* UMC ch1 */
+#define SC_RSTCTRL4_NRST_UMC30		(0x1 <<  4)	/* UMC ch0 */
+
+#define SC_RSTCTRL5		0x2010
+
+#define SC_RSTCTRL6		0x2014
+
+#define SC_CLKCTRL		0x2104
+#define SC_CLKCTRL_CEN_USB31		(0x1 << 17)	/* USB3 #1 */
+#define SC_CLKCTRL_CEN_USB30		(0x1 << 16)	/* USB3 #0 */
+#define SC_CLKCTRL_CEN_ETHER		(0x1 << 12)
+#define SC_CLKCTRL_CEN_GIO		(0x1 <<  6)
+/* Pro4 or older */
+#define SC_CLKCTRL_CEN_UMC		(0x1 <<  4)
+#define SC_CLKCTRL_CEN_NAND		(0x1 <<  2)
+#define SC_CLKCTRL_CEN_SBC		(0x1 <<  1)
+#define SC_CLKCTRL_CEN_PERI		(0x1 <<  0)
+
+/* Pro5 or newer */
+#define SC_CLKCTRL4		0x210c
+#define SC_CLKCTRL4_CEN_UMCSB		(0x1 << 12)	/* UMC system bus */
+#define SC_CLKCTRL4_CEN_UMC2		(0x1 <<  2)	/* UMC ch2 */
+#define SC_CLKCTRL4_CEN_UMC1		(0x1 <<  1)	/* UMC ch1 */
+#define SC_CLKCTRL4_CEN_UMC0		(0x1 <<  0)	/* UMC ch0 */
+
+/* System reset control register */
+#define SC_IRQTIMSET		0x3000
+#define SC_SLFRSTSEL		0x3010
+#define SC_SLFRSTCTL		0x3014
+
+#endif /* ARCH_SC_REGS_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/sc64-regs.h b/roms/u-boot/arch/arm/mach-uniphier/sc64-regs.h
new file mode 100644
index 000000000..fdcca232b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/sc64-regs.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UniPhier SC (System Control) block registers for ARMv8 SoCs
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef SC64_REGS_H
+#define SC64_REGS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+extern void __iomem *sc_base;
+#endif
+
+#define SC_BASE			0x61840000
+
+#define SC_RSTCTRL		0x2000
+#define SC_RSTCTRL3		0x2008
+#define SC_RSTCTRL4		0x200c
+#define SC_RSTCTRL5		0x2010
+#define SC_RSTCTRL6		0x2014
+#define SC_RSTCTRL7		0x2018
+
+#define SC_CLKCTRL		0x2100
+#define SC_CLKCTRL3		0x2108
+#define SC_CLKCTRL4		0x210c
+#define SC_CLKCTRL5		0x2110
+#define SC_CLKCTRL6		0x2114
+#define SC_CLKCTRL7		0x2118
+
+#define SC_CA72_GEARST		0x8000
+#define SC_CA72_GEARSET		0x8004
+#define SC_CA72_GEARUPD		0x8008
+#define SC_CA53_GEARST		0x8080
+#define SC_CA53_GEARSET		0x8084
+#define SC_CA53_GEARUPD		0x8088
+#define   SC_CA_GEARUPD			(1 << 0)
+
+#endif /* SC64_REGS_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/sg-regs.h b/roms/u-boot/arch/arm/mach-uniphier/sg-regs.h
new file mode 100644
index 000000000..a0fa51a8b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/sg-regs.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UniPhier SG (SoC Glue) block registers
+ *
+ * Copyright (C) 2011-2015 Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2016-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef UNIPHIER_SG_REGS_H
+#define UNIPHIER_SG_REGS_H
+
+#include <linux/bitops.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#ifdef CONFIG_ARCH_UNIPHIER_V8_MULTI
+extern void __iomem *sg_base;
+#else
+#define sg_base			((void __iomem *)SG_BASE)
+#endif
+#endif /* __ASSEMBLY__ */
+
+/* Base Address */
+#define SG_BASE			0x5f800000
+
+/* Revision */
+#define SG_REVISION		0x0000
+#define   SG_REVISION_TYPE_MASK		GENMASK(23, 16)
+#define   SG_REVISION_MODEL_MASK	GENMASK(10, 8)
+#define   SG_REVISION_REV_MASK		GENMASK(4, 0)
+
+/* Memory Configuration */
+#define SG_MEMCONF		0x0400
+
+#define SG_MEMCONF_CH0_SZ_MASK		((0x1 << 10) | (0x03 << 0))
+#define SG_MEMCONF_CH0_SZ_64M		((0x0 << 10) | (0x01 << 0))
+#define SG_MEMCONF_CH0_SZ_128M		((0x0 << 10) | (0x02 << 0))
+#define SG_MEMCONF_CH0_SZ_256M		((0x0 << 10) | (0x03 << 0))
+#define SG_MEMCONF_CH0_SZ_512M		((0x1 << 10) | (0x00 << 0))
+#define SG_MEMCONF_CH0_SZ_1G		((0x1 << 10) | (0x01 << 0))
+#define SG_MEMCONF_CH0_NUM_MASK		(0x1 << 8)
+#define SG_MEMCONF_CH0_NUM_1		(0x1 << 8)
+#define SG_MEMCONF_CH0_NUM_2		(0x0 << 8)
+
+#define SG_MEMCONF_CH1_SZ_MASK		((0x1 << 11) | (0x03 << 2))
+#define SG_MEMCONF_CH1_SZ_64M		((0x0 << 11) | (0x01 << 2))
+#define SG_MEMCONF_CH1_SZ_128M		((0x0 << 11) | (0x02 << 2))
+#define SG_MEMCONF_CH1_SZ_256M		((0x0 << 11) | (0x03 << 2))
+#define SG_MEMCONF_CH1_SZ_512M		((0x1 << 11) | (0x00 << 2))
+#define SG_MEMCONF_CH1_SZ_1G		((0x1 << 11) | (0x01 << 2))
+#define SG_MEMCONF_CH1_NUM_MASK		(0x1 << 9)
+#define SG_MEMCONF_CH1_NUM_1		(0x1 << 9)
+#define SG_MEMCONF_CH1_NUM_2		(0x0 << 9)
+
+#define SG_MEMCONF_CH2_SZ_MASK		((0x1 << 26) | (0x03 << 16))
+#define SG_MEMCONF_CH2_SZ_64M		((0x0 << 26) | (0x01 << 16))
+#define SG_MEMCONF_CH2_SZ_128M		((0x0 << 26) | (0x02 << 16))
+#define SG_MEMCONF_CH2_SZ_256M		((0x0 << 26) | (0x03 << 16))
+#define SG_MEMCONF_CH2_SZ_512M		((0x1 << 26) | (0x00 << 16))
+#define SG_MEMCONF_CH2_SZ_1G		((0x1 << 26) | (0x01 << 16))
+#define SG_MEMCONF_CH2_NUM_MASK		(0x1 << 24)
+#define SG_MEMCONF_CH2_NUM_1		(0x1 << 24)
+#define SG_MEMCONF_CH2_NUM_2		(0x0 << 24)
+/* PH1-LD6b, ProXstream2, PH1-LD20 only */
+#define SG_MEMCONF_CH2_DISABLE		(0x1 << 21)
+
+#define SG_MEMCONF_SPARSEMEM		(0x1 << 4)
+
+#define SG_USBPHYCTRL		0x0500
+#define SG_ETPHYPSHUT		0x0554
+#define SG_ETPHYCNT		0x0550
+
+/* Pin Control */
+#define SG_PINCTRL_BASE		0x1000
+
+/* PH1-Pro4, PH1-Pro5 */
+#define SG_LOADPINCTRL		0x1700
+
+/* Input Enable */
+#define SG_IECTRL		0x1d00
+
+/* Pin Monitor */
+#define SG_PINMON0		0x00100100
+#define SG_PINMON2		0x00100108
+
+#define SG_PINMON0_CLK_MODE_UPLLSRC_MASK	(0x3 << 19)
+#define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT	(0x0 << 19)
+#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27A	(0x2 << 19)
+#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27B	(0x3 << 19)
+
+#define SG_PINMON0_CLK_MODE_AXOSEL_MASK		(0x3 << 16)
+#define SG_PINMON0_CLK_MODE_AXOSEL_24576KHZ	(0x0 << 16)
+#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ	(0x1 << 16)
+#define SG_PINMON0_CLK_MODE_AXOSEL_6144KHZ	(0x2 << 16)
+#define SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ	(0x3 << 16)
+
+#define SG_PINMON0_CLK_MODE_AXOSEL_DEFAULT	(0x0 << 16)
+#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U	(0x1 << 16)
+#define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ	(0x2 << 16)
+#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A	(0x3 << 16)
+
+#endif /* UNIPHIER_SG_REGS_H */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/soc-info.c b/roms/u-boot/arch/arm/mach-uniphier/soc-info.c
new file mode 100644
index 000000000..b0221016d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/soc-info.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/io.h>
+#include <linux/types.h>
+
+#include "sg-regs.h"
+#include "soc-info.h"
+
+unsigned int uniphier_get_soc_id(void)
+{
+	u32 rev = readl(sg_base + SG_REVISION);
+
+	return FIELD_GET(SG_REVISION_TYPE_MASK, rev);
+}
+
+unsigned int uniphier_get_soc_model(void)
+{
+	u32 rev = readl(sg_base + SG_REVISION);
+
+	return FIELD_GET(SG_REVISION_MODEL_MASK, rev);
+}
+
+unsigned int uniphier_get_soc_revision(void)
+{
+	u32 rev = readl(sg_base + SG_REVISION);
+
+	return FIELD_GET(SG_REVISION_REV_MASK, rev);
+}
diff --git a/roms/u-boot/arch/arm/mach-uniphier/soc-info.h b/roms/u-boot/arch/arm/mach-uniphier/soc-info.h
new file mode 100644
index 000000000..73256b7c7
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/soc-info.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef __UNIPHIER_SOC_INFO_H__
+#define __UNIPHIER_SOC_INFO_H__
+
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+
+#define UNIPHIER_LD4_ID		0x26
+#define UNIPHIER_PRO4_ID	0x28
+#define UNIPHIER_SLD8_ID	0x29
+#define UNIPHIER_PRO5_ID	0x2a
+#define UNIPHIER_PXS2_ID	0x2e
+#define UNIPHIER_LD6B_ID	0x2f
+#define UNIPHIER_LD11_ID	0x31
+#define UNIPHIER_LD20_ID	0x32
+#define UNIPHIER_PXS3_ID	0x35
+
+unsigned int uniphier_get_soc_id(void);
+unsigned int uniphier_get_soc_model(void);
+unsigned int uniphier_get_soc_revision(void);
+
+#define UNIPHIER_DEFINE_SOCDATA_FUNC(__func_name, __table)	\
+static typeof(&__table[0]) __func_name(void)			\
+{								\
+	unsigned int soc_id;					\
+	int i;							\
+								\
+	soc_id = uniphier_get_soc_id();				\
+	for (i = 0; i < ARRAY_SIZE(__table); i++) {		\
+		if (__table[i].soc_id == soc_id)		\
+			return &__table[i];			\
+	}							\
+								\
+	return NULL;						\
+}
+
+#endif /* __UNIPHIER_SOC_INFO_H__ */
diff --git a/roms/u-boot/arch/arm/mach-uniphier/spl_board_init.c b/roms/u-boot/arch/arm/mach-uniphier/spl_board_init.c
new file mode 100644
index 000000000..a93b8cdc0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-uniphier/spl_board_init.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <debug_uart.h>
+#include <hang.h>
+#include <spl.h>
+
+#include "init.h"
+#include "micro-support-card.h"
+#include "soc-info.h"
+
+struct uniphier_spl_initdata {
+	unsigned int soc_id;
+	void (*bcu_init)(const struct uniphier_board_data *bd);
+	void (*early_clk_init)(void);
+	int (*dpll_init)(const struct uniphier_board_data *bd);
+	int (*memconf_init)(const struct uniphier_board_data *bd);
+	void (*dram_clk_init)(void);
+	int (*umc_init)(const struct uniphier_board_data *bd);
+};
+
+static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
+#if defined(CONFIG_ARCH_UNIPHIER_LD4)
+	{
+		.soc_id = UNIPHIER_LD4_ID,
+		.bcu_init = uniphier_ld4_bcu_init,
+		.early_clk_init = uniphier_ld4_early_clk_init,
+		.dpll_init = uniphier_ld4_dpll_init,
+		.memconf_init = uniphier_memconf_2ch_init,
+		.dram_clk_init = uniphier_ld4_dram_clk_init,
+		.umc_init = uniphier_ld4_umc_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
+	{
+		.soc_id = UNIPHIER_PRO4_ID,
+		.early_clk_init = uniphier_ld4_early_clk_init,
+		.dpll_init = uniphier_pro4_dpll_init,
+		.memconf_init = uniphier_memconf_2ch_init,
+		.dram_clk_init = uniphier_ld4_dram_clk_init,
+		.umc_init = uniphier_pro4_umc_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
+	{
+		.soc_id = UNIPHIER_SLD8_ID,
+		.bcu_init = uniphier_ld4_bcu_init,
+		.early_clk_init = uniphier_ld4_early_clk_init,
+		.dpll_init = uniphier_sld8_dpll_init,
+		.memconf_init = uniphier_memconf_2ch_init,
+		.dram_clk_init = uniphier_ld4_dram_clk_init,
+		.umc_init = uniphier_sld8_umc_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
+	{
+		.soc_id = UNIPHIER_PRO5_ID,
+		.early_clk_init = uniphier_ld4_early_clk_init,
+		.dpll_init = uniphier_pro5_dpll_init,
+		.memconf_init = uniphier_memconf_2ch_init,
+		.dram_clk_init = uniphier_pro5_dram_clk_init,
+		.umc_init = uniphier_pro5_umc_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
+	{
+		.soc_id = UNIPHIER_PXS2_ID,
+		.early_clk_init = uniphier_ld4_early_clk_init,
+		.dpll_init = uniphier_pxs2_dpll_init,
+		.memconf_init = uniphier_memconf_3ch_init,
+		.dram_clk_init = uniphier_pxs2_dram_clk_init,
+		.umc_init = uniphier_pxs2_umc_init,
+	},
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
+	{
+		.soc_id = UNIPHIER_LD6B_ID,
+		.early_clk_init = uniphier_ld4_early_clk_init,
+		.dpll_init = uniphier_pxs2_dpll_init,
+		.memconf_init = uniphier_memconf_3ch_init,
+		.dram_clk_init = uniphier_pxs2_dram_clk_init,
+		.umc_init = uniphier_pxs2_umc_init,
+	},
+#endif
+};
+UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_spl_initdata, uniphier_spl_initdata)
+
+void spl_board_init(void)
+{
+	const struct uniphier_board_data *bd;
+	const struct uniphier_spl_initdata *initdata;
+	int ret;
+
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
+
+	bd = uniphier_get_board_param();
+	if (!bd)
+		hang();
+
+	initdata = uniphier_get_spl_initdata();
+	if (!initdata)
+		hang();
+
+	if (initdata->bcu_init)
+		initdata->bcu_init(bd);
+
+	initdata->early_clk_init();
+
+	preloader_console_init();
+
+	ret = initdata->dpll_init(bd);
+	if (ret) {
+		pr_err("failed to init DPLL\n");
+		hang();
+	}
+
+	ret = initdata->memconf_init(bd);
+	if (ret) {
+		pr_err("failed to init MEMCONF\n");
+		hang();
+	}
+
+	initdata->dram_clk_init();
+
+	ret = initdata->umc_init(bd);
+	if (ret) {
+		pr_err("failed to init DRAM\n");
+		hang();
+	}
+}
diff --git a/roms/u-boot/arch/arm/mach-versal/Kconfig b/roms/u-boot/arch/arm/mach-versal/Kconfig
new file mode 100644
index 000000000..ebd2da388
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versal/Kconfig
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+if ARCH_VERSAL
+
+config SYS_BOARD
+	string "Board name"
+	default "versal"
+
+config SYS_VENDOR
+	string "Vendor name"
+	default "xilinx"
+
+config SYS_SOC
+	default "versal"
+
+config SYS_CONFIG_NAME
+	string "Board configuration name"
+	default "xilinx_versal"
+	help
+	  This option contains information about board configuration name.
+	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+	  will be used for board configuration.
+
+config GICV3
+	def_bool y
+
+config SYS_MALLOC_LEN
+	default 0x2000000
+
+config COUNTER_FREQUENCY
+	int "Timer clock frequency"
+	default 0
+	help
+	  Setup time clock frequency for certain platform
+
+config ZYNQ_SDHCI_MAX_FREQ
+	default 200000000
+
+config IOU_SWITCH_DIVISOR0
+	hex "IOU switch divisor0"
+	default 0x20
+	help
+	  Setup time clock divisor for input clock.
+
+config SYS_MEM_RSVD_FOR_MMU
+	bool "Reserve memory for MMU Table"
+	help
+	  If defined this option is used to setup different space for
+	  MMU table than the one which will be allocated during
+	  relocation.
+
+config DEFINE_TCM_OCM_MMAP
+	bool "Define TCM and OCM memory in MMU Table"
+	default y if MP
+	help
+	  This option if enabled defines the TCM and OCM memory and its
+	  memory attributes in MMU table entry.
+
+config VERSAL_NO_DDR
+	bool "Disable DDR MMU mapping"
+	help
+	  This option configures MMU with no DDR to avoid speculative
+	  access to DDR memory where DDR is not present.
+
+source "board/xilinx/Kconfig"
+source "board/xilinx/versal/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-versal/Makefile b/roms/u-boot/arch/arm/mach-versal/Makefile
new file mode 100644
index 000000000..ca12e2917
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versal/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 - 2018 Xilinx, Inc.
+# Michal Simek <michal.simek@xilinx.com>
+#
+
+obj-y	+= clk.o
+obj-y	+= cpu.o
+obj-$(CONFIG_SYS_MEM_RSVD_FOR_MMU)	+= mp.o
diff --git a/roms/u-boot/arch/arm/mach-versal/clk.c b/roms/u-boot/arch/arm/mach-versal/clk.c
new file mode 100644
index 000000000..249e050cc
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versal/clk.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 - 2018 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CLOCKS
+/**
+ * set_cpu_clk_info - Initialize clock framework
+ *
+ * Return: 0 always.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+	gd->cpu_clk = get_tbclk();
+
+	gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+	gd->bd->bi_dsp_freq = 0;
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-versal/cpu.c b/roms/u-boot/arch/arm/mach-versal/cpu.c
new file mode 100644
index 000000000..a35aac2c0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versal/cpu.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 - 2018 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/armv8/mmu.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/cache.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define VERSAL_MEM_MAP_USED	5
+
+#define DRAM_BANKS CONFIG_NR_DRAM_BANKS
+
+#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+#define TCM_MAP 1
+#else
+#define TCM_MAP 0
+#endif
+
+/* +1 is end of list which needs to be empty */
+#define VERSAL_MEM_MAP_MAX (VERSAL_MEM_MAP_USED + DRAM_BANKS + TCM_MAP + 1)
+
+static struct mm_region versal_mem_map[VERSAL_MEM_MAP_MAX] = {
+	{
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x70000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0xf0000000UL,
+		.phys = 0xf0000000UL,
+		.size = 0x0fe00000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x400000000UL,
+		.phys = 0x400000000UL,
+		.size = 0x200000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x600000000UL,
+		.phys = 0x600000000UL,
+		.size = 0x800000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xe00000000UL,
+		.phys = 0xe00000000UL,
+		.size = 0xf200000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}
+};
+
+void mem_map_fill(void)
+{
+	int banks = VERSAL_MEM_MAP_USED;
+
+#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+	versal_mem_map[banks].virt = 0xffe00000UL;
+	versal_mem_map[banks].phys = 0xffe00000UL;
+	versal_mem_map[banks].size = 0x00200000UL;
+	versal_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+				      PTE_BLOCK_INNER_SHARE;
+	banks = banks + 1;
+#endif
+
+	for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		/* Zero size means no more DDR that's this is end */
+		if (!gd->bd->bi_dram[i].size)
+			break;
+
+#if defined(CONFIG_VERSAL_NO_DDR)
+		if (gd->bd->bi_dram[i].start < 0x80000000UL ||
+		    gd->bd->bi_dram[i].start > 0x100000000UL) {
+			printf("Ignore caches over %llx/%llx\n",
+			       gd->bd->bi_dram[i].start,
+			       gd->bd->bi_dram[i].size);
+			continue;
+		}
+#endif
+		versal_mem_map[banks].virt = gd->bd->bi_dram[i].start;
+		versal_mem_map[banks].phys = gd->bd->bi_dram[i].start;
+		versal_mem_map[banks].size = gd->bd->bi_dram[i].size;
+		versal_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+					      PTE_BLOCK_INNER_SHARE;
+		banks = banks + 1;
+	}
+}
+
+struct mm_region *mem_map = versal_mem_map;
+
+u64 get_page_table_size(void)
+{
+	return 0x14000;
+}
+
+#if defined(CONFIG_SYS_MEM_RSVD_FOR_MMU)
+int arm_reserve_mmu(void)
+{
+	tcm_init(TCM_LOCK);
+	gd->arch.tlb_size = PGTABLE_SIZE;
+	gd->arch.tlb_addr = VERSAL_TCM_BASE_ADDR;
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-versal/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-versal/include/mach/gpio.h
new file mode 100644
index 000000000..677facba5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versal/include/mach/gpio.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+/* Empty file - for compilation */
diff --git a/roms/u-boot/arch/arm/mach-versal/include/mach/hardware.h b/roms/u-boot/arch/arm/mach-versal/include/mach/hardware.h
new file mode 100644
index 000000000..9af5afd3f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versal/include/mach/hardware.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define VERSAL_CRL_APB_BASEADDR	0xFF5E0000
+
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT	BIT(25)
+
+#define IOU_SWITCH_CTRL_CLKACT_BIT	BIT(25)
+#define IOU_SWITCH_CTRL_DIVISOR0_SHIFT	8
+
+struct crlapb_regs {
+	u32 reserved0[67];
+	u32 cpu_r5_ctrl;
+	u32 reserved;
+	u32 iou_switch_ctrl; /* 0x114 */
+	u32 reserved1[13];
+	u32 timestamp_ref_ctrl; /* 0x14c */
+	u32 reserved3[108];
+	u32 rst_cpu_r5;
+	u32 reserved2[17];
+	u32 rst_timestamp; /* 0x348 */
+};
+
+#define crlapb_base ((struct crlapb_regs *)VERSAL_CRL_APB_BASEADDR)
+
+#define VERSAL_IOU_SCNTR_SECURE	0xFF140000
+
+#define IOU_SCNTRS_CONTROL_EN	1
+
+struct iou_scntrs_regs {
+	u32 counter_control_register; /* 0x0 */
+	u32 reserved0[7];
+	u32 base_frequency_id_register; /* 0x20 */
+};
+
+#define iou_scntr_secure ((struct iou_scntrs_regs *)VERSAL_IOU_SCNTR_SECURE)
+
+#define VERSAL_TCM_BASE_ADDR	0xFFE00000
+#define VERSAL_TCM_SIZE		0x40000
+
+#define VERSAL_RPU_BASEADDR	0xFF9A0000
+
+struct rpu_regs {
+	u32 rpu_glbl_ctrl;
+	u32 reserved0[63];
+	u32 rpu0_cfg; /* 0x100 */
+	u32 reserved1[63];
+	u32 rpu1_cfg; /* 0x200 */
+};
+
+#define rpu_base ((struct rpu_regs *)VERSAL_RPU_BASEADDR)
+
+#define VERSAL_CRP_BASEADDR	0xF1260000
+
+struct crp_regs {
+	u32 reserved0[128];
+	u32 boot_mode_usr;
+};
+
+#define crp_base ((struct crp_regs *)VERSAL_CRP_BASEADDR)
+
+/* Bootmode setting values */
+#define BOOT_MODES_MASK	0x0000000F
+#define QSPI_MODE_24BIT	0x00000001
+#define QSPI_MODE_32BIT	0x00000002
+#define SD_MODE		0x00000003 /* sd 0 */
+#define SD_MODE1	0x00000005 /* sd 1 */
+#define EMMC_MODE	0x00000006
+#define USB_MODE	0x00000007
+#define OSPI_MODE	0x00000008
+#define SD1_LSHFT_MODE	0x0000000E /* SD1 Level shifter */
+#define JTAG_MODE	0x00000000
+#define BOOT_MODE_USE_ALT	0x100
+#define BOOT_MODE_ALT_SHIFT	12
diff --git a/roms/u-boot/arch/arm/mach-versal/include/mach/sys_proto.h b/roms/u-boot/arch/arm/mach-versal/include/mach/sys_proto.h
new file mode 100644
index 000000000..05934c28d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versal/include/mach/sys_proto.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+enum {
+	TCM_LOCK,
+	TCM_SPLIT,
+};
+
+void tcm_init(u8 mode);
+void mem_map_fill(void);
diff --git a/roms/u-boot/arch/arm/mach-versal/mp.c b/roms/u-boot/arch/arm/mach-versal/mp.c
new file mode 100644
index 000000000..9b0518d6a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versal/mp.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2019 Xilinx, Inc.
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+
+#define HALT		0
+#define RELEASE		1
+
+#define VERSAL_RPU_CFG_CPU_HALT_MASK		0x01
+#define VERSAL_RPU_GLBL_CTRL_SPLIT_LOCK_MASK	0x08
+#define VERSAL_RPU_GLBL_CTRL_TCM_COMB_MASK	0x40
+#define VERSAL_RPU_GLBL_CTRL_SLCLAMP_MASK	0x10
+
+#define VERSAL_CRLAPB_RST_LPD_AMBA_RST_MASK	0x04
+#define VERSAL_CRLAPB_RST_LPD_R50_RST_MASK	0x01
+#define VERSAL_CRLAPB_RST_LPD_R51_RST_MASK	0x02
+#define VERSAL_CRL_RST_CPU_R5_RESET_PGE_MASK	0x10
+#define VERSAL_CRLAPB_CPU_R5_CTRL_CLKACT_MASK	0x1000000
+
+void set_r5_halt_mode(u8 halt, u8 mode)
+{
+	u32 tmp;
+
+	tmp = readl(&rpu_base->rpu0_cfg);
+	if (halt == HALT)
+		tmp &= ~VERSAL_RPU_CFG_CPU_HALT_MASK;
+	else
+		tmp |= VERSAL_RPU_CFG_CPU_HALT_MASK;
+	writel(tmp, &rpu_base->rpu0_cfg);
+
+	if (mode == TCM_LOCK) {
+		tmp = readl(&rpu_base->rpu1_cfg);
+		if (halt == HALT)
+			tmp &= ~VERSAL_RPU_CFG_CPU_HALT_MASK;
+		else
+			tmp |= VERSAL_RPU_CFG_CPU_HALT_MASK;
+		writel(tmp, &rpu_base->rpu1_cfg);
+	}
+}
+
+void set_r5_tcm_mode(u8 mode)
+{
+	u32 tmp;
+
+	tmp = readl(&rpu_base->rpu_glbl_ctrl);
+	if (mode == TCM_LOCK) {
+		tmp &= ~VERSAL_RPU_GLBL_CTRL_SPLIT_LOCK_MASK;
+		tmp |= VERSAL_RPU_GLBL_CTRL_TCM_COMB_MASK |
+		       VERSAL_RPU_GLBL_CTRL_SLCLAMP_MASK;
+	} else {
+		tmp |= VERSAL_RPU_GLBL_CTRL_SPLIT_LOCK_MASK;
+		tmp &= ~(VERSAL_RPU_GLBL_CTRL_TCM_COMB_MASK |
+		       VERSAL_RPU_GLBL_CTRL_SLCLAMP_MASK);
+	}
+
+	writel(tmp, &rpu_base->rpu_glbl_ctrl);
+}
+
+void release_r5_reset(u8 mode)
+{
+	u32 tmp;
+
+	tmp = readl(&crlapb_base->rst_cpu_r5);
+	tmp &= ~(VERSAL_CRLAPB_RST_LPD_AMBA_RST_MASK |
+	       VERSAL_CRLAPB_RST_LPD_R50_RST_MASK |
+	       VERSAL_CRL_RST_CPU_R5_RESET_PGE_MASK);
+
+	if (mode == TCM_LOCK)
+		tmp &= ~VERSAL_CRLAPB_RST_LPD_R51_RST_MASK;
+
+	writel(tmp, &crlapb_base->rst_cpu_r5);
+}
+
+void enable_clock_r5(void)
+{
+	u32 tmp;
+
+	tmp = readl(&crlapb_base->cpu_r5_ctrl);
+	tmp |= VERSAL_CRLAPB_CPU_R5_CTRL_CLKACT_MASK;
+	writel(tmp, &crlapb_base->cpu_r5_ctrl);
+}
+
+void initialize_tcm(bool mode)
+{
+	if (!mode) {
+		set_r5_tcm_mode(TCM_LOCK);
+		set_r5_halt_mode(HALT, TCM_LOCK);
+		enable_clock_r5();
+		release_r5_reset(TCM_LOCK);
+	} else {
+		set_r5_tcm_mode(TCM_SPLIT);
+		set_r5_halt_mode(HALT, TCM_SPLIT);
+		enable_clock_r5();
+		release_r5_reset(TCM_SPLIT);
+	}
+}
+
+void tcm_init(u8 mode)
+{
+	puts("WARNING: Initializing TCM overwrites TCM content\n");
+	initialize_tcm(mode);
+	memset((void *)VERSAL_TCM_BASE_ADDR, 0, VERSAL_TCM_SIZE);
+}
diff --git a/roms/u-boot/arch/arm/mach-versatile/Makefile b/roms/u-boot/arch/arm/mach-versatile/Makefile
new file mode 100644
index 000000000..858ca9414
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versatile/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+obj-y	= timer.o
+obj-y	+= reset.o
diff --git a/roms/u-boot/arch/arm/mach-versatile/reset.S b/roms/u-boot/arch/arm/mach-versatile/reset.S
new file mode 100644
index 000000000..c7f1225fb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versatile/reset.S
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ */
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	ldr	r1, rstctl1	/* get clkm1 reset ctl */
+	mov	r3, #0x0
+	strh	r3, [r1]	/* clear it */
+	mov	r3, #0x8
+	strh	r3, [r1]	/* force dsp+arm reset */
+_loop_forever:
+	b	_loop_forever
+
+rstctl1:
+	.word	0xfffece10
diff --git a/roms/u-boot/arch/arm/mach-versatile/timer.c b/roms/u-boot/arch/arm/mach-versatile/timer.c
new file mode 100644
index 000000000..a0babce7b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-versatile/timer.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ */
+
+#include <common.h>
+
+#define TIMER_ENABLE	(1 << 7)
+#define TIMER_MODE_MSK	(1 << 6)
+#define TIMER_MODE_FR	(0 << 6)
+#define TIMER_MODE_PD	(1 << 6)
+
+#define TIMER_INT_EN	(1 << 5)
+#define TIMER_PRS_MSK	(3 << 2)
+#define TIMER_PRS_8S	(1 << 3)
+#define TIMER_SIZE_MSK	(1 << 2)
+#define TIMER_ONE_SHT	(1 << 0)
+
+int timer_init (void)
+{
+	ulong	tmr_ctrl_val;
+
+	/* 1st disable the Timer */
+	tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8);
+	tmr_ctrl_val &= ~TIMER_ENABLE;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val;
+
+	/*
+	 * The Timer Control Register has one Undefined/Shouldn't Use Bit
+	 * So we should do read/modify/write Operation
+	 */
+
+	/*
+	 * Timer Mode : Free Running
+	 * Interrupt : Disabled
+	 * Prescale : 8 Stage, Clk/256
+	 * Tmr Siz : 16 Bit Counter
+	 * Tmr in Wrapping Mode
+	 */
+	tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8);
+	tmr_ctrl_val &= ~(TIMER_MODE_MSK | TIMER_INT_EN | TIMER_PRS_MSK | TIMER_SIZE_MSK | TIMER_ONE_SHT );
+	tmr_ctrl_val |= (TIMER_ENABLE | TIMER_PRS_8S);
+
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val;
+
+	return 0;
+}
+
diff --git a/roms/u-boot/arch/arm/mach-zynq/Kconfig b/roms/u-boot/arch/arm/mach-zynq/Kconfig
new file mode 100644
index 000000000..e54310383
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/Kconfig
@@ -0,0 +1,76 @@
+if ARCH_ZYNQ
+
+config SPL_LDSCRIPT
+	default "arch/arm/mach-zynq/u-boot-spl.lds"
+
+config SPL_FS_FAT
+	default y
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBDISK_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_MMC_SUPPORT
+	default y if MMC_SDHCI_ZYNQ
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config SPL_SPI_FLASH_SUPPORT
+	default y if ZYNQ_QSPI
+
+config SPL_SPI_SUPPORT
+	default y if ZYNQ_QSPI
+
+config ZYNQ_DDRC_INIT
+	bool "Zynq DDRC initialization"
+	default y
+	help
+	  This option used to perform DDR specific initialization
+	  if required. There might be cases like ddr less where we
+	  want to skip ddr init and this option is useful for it.
+
+config SYS_BOARD
+	string "Board name"
+	default "zynq"
+
+config SYS_VENDOR
+	string "Vendor name"
+	default "xilinx"
+
+config SYS_SOC
+	default "zynq"
+
+config SYS_CONFIG_NAME
+	string "Board configuration name"
+	default "zynq-common"
+	help
+	  This option contains information about board configuration name.
+	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+	  will be used for board configuration.
+
+config SYS_MALLOC_F_LEN
+	default 0x800
+
+config SYS_MALLOC_LEN
+	default 0x1400000
+
+config BOOT_INIT_FILE
+	string "boot.bin init register filename"
+	default ""
+	help
+	  Add register writes to boot.bin format (max 256 pairs).
+	  Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
+
+config ZYNQ_SDHCI_MAX_FREQ
+	default 52000000
+
+source "board/xilinx/Kconfig"
+source "board/xilinx/zynq/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-zynq/Makefile b/roms/u-boot/arch/arm/mach-zynq/Makefile
new file mode 100644
index 000000000..8737f434d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+
+obj-y	:= timer.o
+obj-y	+= cpu.o
+obj-y	+= ddrc.o
+obj-y	+= slcr.o
+obj-y	+= clk.o
+obj-y	+= lowlevel_init.o
+AFLAGS_lowlevel_init.o := -mfpu=neon
+obj-$(CONFIG_SPL_BUILD)	+= spl.o ps7_spl_init.o
diff --git a/roms/u-boot/arch/arm/mach-zynq/clk.c b/roms/u-boot/arch/arm/mach-zynq/clk.c
new file mode 100644
index 000000000..27f6bf218
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/clk.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com>
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ */
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <init.h>
+#include <malloc.h>
+#include <asm/arch/clk.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const char * const clk_names[clk_max] = {
+	"armpll", "ddrpll", "iopll",
+	"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
+	"ddr2x", "ddr3x", "dci",
+	"lqspi", "smc", "pcap", "gem0", "gem1",
+	"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+	"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma",
+	"usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper",
+	"sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper",
+	"can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper",
+	"uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper",
+	"smc_aper", "swdt", "dbg_trc", "dbg_apb"
+};
+
+/**
+ * set_cpu_clk_info() - Setup clock information
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock information.
+ */
+int set_cpu_clk_info(void)
+{
+	struct clk clk;
+	struct udevice *dev;
+	ulong rate;
+	int i, ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+		DM_DRIVER_GET(zynq_clk), &dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < 2; i++) {
+		clk.id = i ? ddr3x_clk : cpu_6or4x_clk;
+		ret = clk_request(dev, &clk);
+		if (ret < 0)
+			return ret;
+
+		rate = clk_get_rate(&clk) / 1000000;
+		if (i)
+			gd->bd->bi_ddr_freq = rate;
+		else
+			gd->bd->bi_arm_freq = rate;
+
+		clk_free(&clk);
+	}
+	gd->bd->bi_dsp_freq = 0;
+
+	return 0;
+}
+
+/**
+ * soc_clk_dump() - Print clock frequencies
+ * Returns zero on success
+ *
+ * Implementation for the clk dump command.
+ */
+int soc_clk_dump(void)
+{
+	struct udevice *dev;
+	int i, ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+		DM_DRIVER_GET(zynq_clk), &dev);
+	if (ret)
+		return ret;
+
+	printf("clk\t\tfrequency\n");
+	for (i = 0; i < clk_max; i++) {
+		const char *name = clk_names[i];
+		if (name) {
+			struct clk clk;
+			unsigned long rate;
+
+			clk.id = i;
+			ret = clk_request(dev, &clk);
+			if (ret < 0)
+				return ret;
+
+			rate = clk_get_rate(&clk);
+
+			clk_free(&clk);
+
+			if ((rate == (unsigned long)-ENOSYS) ||
+			    (rate == (unsigned long)-ENXIO))
+				printf("%10s%20s\n", name, "unknown");
+			else
+				printf("%10s%20lu\n", name, rate);
+		}
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-zynq/cpu.c b/roms/u-boot/arch/arm/mach-zynq/cpu.c
new file mode 100644
index 000000000..69b818f24
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/cpu.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012 Xilinx, Inc. All rights reserved.
+ */
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <zynqpl.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/ps7_init_gpl.h>
+#include <asm/arch/sys_proto.h>
+
+#define ZYNQ_SILICON_VER_MASK	0xF0000000
+#define ZYNQ_SILICON_VER_SHIFT	28
+
+#if CONFIG_IS_ENABLED(FPGA)
+xilinx_desc fpga = {
+	.family = xilinx_zynq,
+	.iface = devcfg,
+	.operations = &zynq_op,
+};
+#endif
+
+static const struct {
+	u8 idcode;
+#if defined(CONFIG_FPGA)
+	u32 fpga_size;
+#endif
+	char *devicename;
+} zynq_fpga_descs[] = {
+	ZYNQ_DESC(7Z007S),
+	ZYNQ_DESC(7Z010),
+	ZYNQ_DESC(7Z012S),
+	ZYNQ_DESC(7Z014S),
+	ZYNQ_DESC(7Z015),
+	ZYNQ_DESC(7Z020),
+	ZYNQ_DESC(7Z030),
+	ZYNQ_DESC(7Z035),
+	ZYNQ_DESC(7Z045),
+	ZYNQ_DESC(7Z100),
+	{ /* Sentinel */ },
+};
+
+int arch_cpu_init(void)
+{
+	zynq_slcr_unlock();
+#ifndef CONFIG_SPL_BUILD
+	/* Device config APB, unlock the PCAP */
+	writel(0x757BDF0D, &devcfg_base->unlock);
+	writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
+
+#if (CONFIG_SYS_SDRAM_BASE == 0)
+	/* remap DDR to zero, FILTERSTART */
+	writel(0, &scu_base->filter_start);
+
+	/* OCM_CFG, Mask out the ROM, map ram into upper addresses */
+	writel(0x1F, &slcr_base->ocm_cfg);
+	/* FPGA_RST_CTRL, clear resets on AXI fabric ports */
+	writel(0x0, &slcr_base->fpga_rst_ctrl);
+	/* Set urgent bits with register */
+	writel(0x0, &slcr_base->ddr_urgent_sel);
+	/* Urgent write, ports S2/S3 */
+	writel(0xC, &slcr_base->ddr_urgent);
+#endif
+#endif
+	zynq_slcr_lock();
+
+	return 0;
+}
+
+unsigned int zynq_get_silicon_version(void)
+{
+	return (readl(&devcfg_base->mctrl) & ZYNQ_SILICON_VER_MASK)
+						>> ZYNQ_SILICON_VER_SHIFT;
+}
+
+void reset_cpu(void)
+{
+	zynq_slcr_cpu_reset();
+	while (1)
+		;
+}
+
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
+
+static int __maybe_unused cpu_desc_id(void)
+{
+	u32 idcode;
+	u8 i;
+
+	idcode = zynq_slcr_get_idcode();
+	for (i = 0; zynq_fpga_descs[i].idcode; i++) {
+		if (zynq_fpga_descs[i].idcode == idcode)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+#if defined(CONFIG_ARCH_EARLY_INIT_R)
+int arch_early_init_r(void)
+{
+#if CONFIG_IS_ENABLED(FPGA)
+	int cpu_id = cpu_desc_id();
+
+	if (cpu_id < 0)
+		return 0;
+
+	fpga.size = zynq_fpga_descs[cpu_id].fpga_size;
+	fpga.name = zynq_fpga_descs[cpu_id].devicename;
+	fpga_init();
+	fpga_add(fpga_xilinx, &fpga);
+#endif
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+	u32 version;
+	int cpu_id = cpu_desc_id();
+
+	if (cpu_id < 0)
+		return 0;
+
+	version = zynq_get_silicon_version() << 1;
+	if (version > (PCW_SILICON_VERSION_3 << 1))
+		version += 1;
+
+	printf("CPU:   Zynq %s\n", zynq_fpga_descs[cpu_id].devicename);
+	printf("Silicon: v%d.%d\n", version >> 1, version & 1);
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-zynq/ddrc.c b/roms/u-boot/arch/arm/mach-zynq/ddrc.c
new file mode 100644
index 000000000..28988ef95
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/ddrc.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 - 2013 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012 - 2017 Xilinx, Inc. All rights reserved.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+
+#ifndef CONFIG_ZYNQ_DDRC_INIT
+void zynq_ddrc_init(void) {}
+#else
+/* Control regsiter bitfield definitions */
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK		0xC
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT	2
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT	1
+
+/* ECC scrub regsiter definitions */
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK	0x7
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED	0x4
+
+void zynq_ddrc_init(void)
+{
+	u32 width, ecctype;
+
+	width = readl(&ddrc_base->ddrc_ctrl);
+	width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >>
+					ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT;
+	ecctype = (readl(&ddrc_base->ecc_scrub) &
+		ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK);
+
+	/* ECC is enabled when memory is in 16bit mode and it is enabled */
+	if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED) &&
+	    (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)) {
+		puts("ECC enabled ");
+		/*
+		 * Clear the first 1MB because it is not initialized from
+		 * first stage bootloader. To get ECC to work all memory has
+		 * been initialized by writing any value.
+		 */
+		/* cppcheck-suppress nullPointer */
+		memset((void *)0, 0, 1 * 1024 * 1024);
+	} else {
+		puts("ECC disabled ");
+	}
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-zynq/include/mach/clk.h b/roms/u-boot/arch/arm/mach-zynq/include/mach/clk.h
new file mode 100644
index 000000000..4fff9f452
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/include/mach/clk.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ */
+
+#ifndef _ZYNQ_CLK_H_
+#define _ZYNQ_CLK_H_
+
+enum zynq_clk {
+	armpll_clk, ddrpll_clk, iopll_clk,
+	cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk,
+	ddr2x_clk, ddr3x_clk, dci_clk,
+	lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk,
+	fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk,
+	sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk,
+	usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk,
+	sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk,
+	can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk,
+	uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk,
+	smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-zynq/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-zynq/include/mach/gpio.h
new file mode 100644
index 000000000..6143e2456
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/include/mach/gpio.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2013 Xilinx, Inc.
+ * Copyright (c) 2015 DAVE Embedded Systems
+ */
+
+#ifndef _ZYNQ_GPIO_H
+#define _ZYNQ_GPIO_H
+
+#endif /* _ZYNQ_GPIO_H */
diff --git a/roms/u-boot/arch/arm/mach-zynq/include/mach/hardware.h b/roms/u-boot/arch/arm/mach-zynq/include/mach/hardware.h
new file mode 100644
index 000000000..89eb565c9
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/include/mach/hardware.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#define ZYNQ_SYS_CTRL_BASEADDR		0xF8000000
+#define ZYNQ_DEV_CFG_APB_BASEADDR	0xF8007000
+#define ZYNQ_SCU_BASEADDR		0xF8F00000
+#define ZYNQ_DDRC_BASEADDR		0xF8006000
+#define ZYNQ_EFUSE_BASEADDR		0xF800D000
+#define ZYNQ_OCM_BASEADDR		0xFFFC0000
+
+/* Bootmode setting values */
+#define ZYNQ_BM_MASK		0x7
+#define ZYNQ_BM_QSPI		0x1
+#define ZYNQ_BM_NOR		0x2
+#define ZYNQ_BM_NAND		0x4
+#define ZYNQ_BM_SD		0x5
+#define ZYNQ_BM_JTAG		0x0
+
+/* Reflect slcr offsets */
+struct slcr_regs {
+	u32 scl; /* 0x0 */
+	u32 slcr_lock; /* 0x4 */
+	u32 slcr_unlock; /* 0x8 */
+	u32 reserved0_1[61];
+	u32 arm_pll_ctrl; /* 0x100 */
+	u32 ddr_pll_ctrl; /* 0x104 */
+	u32 io_pll_ctrl; /* 0x108 */
+	u32 reserved0_2[5];
+	u32 arm_clk_ctrl; /* 0x120 */
+	u32 ddr_clk_ctrl; /* 0x124 */
+	u32 dci_clk_ctrl; /* 0x128 */
+	u32 aper_clk_ctrl; /* 0x12c */
+	u32 reserved0_3[2];
+	u32 gem0_rclk_ctrl; /* 0x138 */
+	u32 gem1_rclk_ctrl; /* 0x13c */
+	u32 gem0_clk_ctrl; /* 0x140 */
+	u32 gem1_clk_ctrl; /* 0x144 */
+	u32 smc_clk_ctrl; /* 0x148 */
+	u32 lqspi_clk_ctrl; /* 0x14c */
+	u32 sdio_clk_ctrl; /* 0x150 */
+	u32 uart_clk_ctrl; /* 0x154 */
+	u32 spi_clk_ctrl; /* 0x158 */
+	u32 can_clk_ctrl; /* 0x15c */
+	u32 can_mioclk_ctrl; /* 0x160 */
+	u32 dbg_clk_ctrl; /* 0x164 */
+	u32 pcap_clk_ctrl; /* 0x168 */
+	u32 reserved0_4[1];
+	u32 fpga0_clk_ctrl; /* 0x170 */
+	u32 reserved0_5[3];
+	u32 fpga1_clk_ctrl; /* 0x180 */
+	u32 reserved0_6[3];
+	u32 fpga2_clk_ctrl; /* 0x190 */
+	u32 reserved0_7[3];
+	u32 fpga3_clk_ctrl; /* 0x1a0 */
+	u32 reserved0_8[8];
+	u32 clk_621_true; /* 0x1c4 */
+	u32 reserved1[14];
+	u32 pss_rst_ctrl; /* 0x200 */
+	u32 reserved2[15];
+	u32 fpga_rst_ctrl; /* 0x240 */
+	u32 reserved3[5];
+	u32 reboot_status; /* 0x258 */
+	u32 boot_mode; /* 0x25c */
+	u32 reserved4[116];
+	u32 trust_zone; /* 0x430 */ /* FIXME */
+	u32 reserved5_1[63];
+	u32 pss_idcode; /* 0x530 */
+	u32 reserved5_2[51];
+	u32 ddr_urgent; /* 0x600 */
+	u32 reserved6[6];
+	u32 ddr_urgent_sel; /* 0x61c */
+	u32 reserved7[56];
+	u32 mio_pin[54]; /* 0x700 - 0x7D4 */
+	u32 reserved8[74];
+	u32 lvl_shftr_en; /* 0x900 */
+	u32 reserved9[3];
+	u32 ocm_cfg; /* 0x910 */
+};
+
+#define slcr_base ((struct slcr_regs *)ZYNQ_SYS_CTRL_BASEADDR)
+
+struct devcfg_regs {
+	u32 ctrl; /* 0x0 */
+	u32 lock; /* 0x4 */
+	u32 cfg; /* 0x8 */
+	u32 int_sts; /* 0xc */
+	u32 int_mask; /* 0x10 */
+	u32 status; /* 0x14 */
+	u32 dma_src_addr; /* 0x18 */
+	u32 dma_dst_addr; /* 0x1c */
+	u32 dma_src_len; /* 0x20 */
+	u32 dma_dst_len; /* 0x24 */
+	u32 rom_shadow; /* 0x28 */
+	u32 reserved1[2];
+	u32 unlock; /* 0x34 */
+	u32 reserved2[18];
+	u32 mctrl; /* 0x80 */
+	u32 reserved3;
+	u32 write_count; /* 0x88 */
+	u32 read_count; /* 0x8c */
+};
+
+#define devcfg_base ((struct devcfg_regs *)ZYNQ_DEV_CFG_APB_BASEADDR)
+
+struct scu_regs {
+	u32 reserved1[16];
+	u32 filter_start; /* 0x40 */
+	u32 filter_end; /* 0x44 */
+};
+
+#define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR)
+
+struct ddrc_regs {
+	u32 ddrc_ctrl; /* 0x0 */
+	u32 reserved[60];
+	u32 ecc_scrub; /* 0xF4 */
+};
+#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR)
+
+struct efuse_reg {
+	u32 reserved1[4];
+	u32 status;
+	u32 reserved2[3];
+};
+
+#define efuse_base ((struct efuse_reg *)ZYNQ_EFUSE_BASEADDR)
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-zynq/include/mach/ps7_init_gpl.h b/roms/u-boot/arch/arm/mach-zynq/include/mach/ps7_init_gpl.h
new file mode 100644
index 000000000..bd46a9b31
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/include/mach/ps7_init_gpl.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved.
+ * (c) Copyright 2016 Topic Embedded Products.
+ */
+
+#ifndef _ASM_ARCH_PS7_INIT_GPL_H
+#define _ASM_ARCH_PS7_INIT_GPL_H
+
+/* Opcode exit is 0 all the time */
+#define OPCODE_EXIT		0U
+#define OPCODE_MASKWRITE	0U
+#define OPCODE_MASKPOLL		1U
+#define OPCODE_MASKDELAY	2U
+#define OPCODE_WRITE		3U
+#define OPCODE_ADDRESS_MASK	(~3U)
+
+/* Sentinel */
+#define EMIT_EXIT()			OPCODE_EXIT
+/* Opcode is in lower 2 bits of address, address is always 4-byte aligned */
+#define EMIT_MASKWRITE(addr, mask, val)	OPCODE_MASKWRITE | addr, mask, val
+#define EMIT_MASKPOLL(addr, mask)	OPCODE_MASKPOLL | addr, mask
+#define EMIT_MASKDELAY(addr, mask)	OPCODE_MASKDELAY | addr, mask
+#define EMIT_WRITE(addr, val)		OPCODE_WRITE | addr, val
+
+/* Returns codes of ps7_init* */
+#define PS7_INIT_SUCCESS		(0)
+#define PS7_INIT_CORRUPT		(1)
+#define PS7_INIT_TIMEOUT		(2)
+#define PS7_POLL_FAILED_DDR_INIT	(3)
+#define PS7_POLL_FAILED_DMA		(4)
+#define PS7_POLL_FAILED_PLL		(5)
+
+#define PCW_SILICON_VERSION_1	0
+#define PCW_SILICON_VERSION_2	1
+#define PCW_SILICON_VERSION_3	2
+
+/* Called by spl.c */
+int ps7_init(void);
+int ps7_post_config(void);
+
+/* Defined in ps7_init_common.c */
+int ps7_config(unsigned long *ps7_config_init);
+
+unsigned long ps7GetSiliconVersion(void);
+
+#endif /* _ASM_ARCH_PS7_INIT_GPL_H */
diff --git a/roms/u-boot/arch/arm/mach-zynq/include/mach/sys_proto.h b/roms/u-boot/arch/arm/mach-zynq/include/mach/sys_proto.h
new file mode 100644
index 000000000..1dc16d479
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/include/mach/sys_proto.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+extern void zynq_slcr_lock(void);
+extern void zynq_slcr_unlock(void);
+extern void zynq_slcr_cpu_reset(void);
+extern void zynq_slcr_devcfg_disable(void);
+extern void zynq_slcr_devcfg_enable(void);
+extern u32 zynq_slcr_get_boot_mode(void);
+extern u32 zynq_slcr_get_idcode(void);
+extern int zynq_slcr_get_mio_pin_status(const char *periph);
+extern void zynq_ddrc_init(void);
+extern unsigned int zynq_get_silicon_version(void);
+
+int zynq_board_read_rom_ethaddr(unsigned char *ethaddr);
+
+#endif /* _SYS_PROTO_H_ */
diff --git a/roms/u-boot/arch/arm/mach-zynq/lowlevel_init.S b/roms/u-boot/arch/arm/mach-zynq/lowlevel_init.S
new file mode 100644
index 000000000..ed7329d9a
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/lowlevel_init.S
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 - 2015 Xilinx, Inc. All rights reserved.
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+
+	/* Enable the the VFP */
+	mrc	p15, 0, r1, c1, c0, 2
+	orr	r1, r1, #(0x3 << 20)
+	orr	r1, r1, #(0x3 << 20)
+	mcr	p15, 0, r1, c1, c0, 2
+	isb
+	fmrx	r1, FPEXC
+	orr	r1,r1, #(1<<30)
+	fmxr	FPEXC, r1
+
+	/* Move back to caller */
+	mov	pc, lr
+
+ENDPROC(lowlevel_init)
diff --git a/roms/u-boot/arch/arm/mach-zynq/ps7_spl_init.c b/roms/u-boot/arch/arm/mach-zynq/ps7_spl_init.c
new file mode 100644
index 000000000..4c38724d4
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/ps7_spl_init.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (c) Copyright 2010-2017 Xilinx, Inc. All rights reserved.
+ * (c) Copyright 2016 Topic Embedded Products.
+ */
+
+#include <asm/io.h>
+#include <asm/spl.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/ps7_init_gpl.h>
+
+__weak int ps7_init(void)
+{
+	/*
+	 * This function is overridden by the one in
+	 * board/xilinx/zynq/(platform)/ps7_init_gpl.c, if it exists.
+	 */
+	return 0;
+}
+
+__weak int ps7_post_config(void)
+{
+	/*
+	 * This function is overridden by the one in
+	 * board/xilinx/zynq/(platform)/ps7_init_gpl.c, if it exists.
+	 */
+	return 0;
+}
+
+/* For delay calculation using global registers*/
+#define SCU_GLOBAL_TIMER_COUNT_L32	0xF8F00200
+#define SCU_GLOBAL_TIMER_COUNT_U32	0xF8F00204
+#define SCU_GLOBAL_TIMER_CONTROL	0xF8F00208
+#define SCU_GLOBAL_TIMER_AUTO_INC	0xF8F00218
+#define APU_FREQ  666666666
+
+#define PS7_MASK_POLL_TIME 100000000
+
+/* IO accessors. No memory barriers desired. */
+static inline void iowrite(unsigned long val, unsigned long addr)
+{
+	__raw_writel(val, addr);
+}
+
+static inline unsigned long ioread(unsigned long addr)
+{
+	return __raw_readl(addr);
+}
+
+/* start timer */
+static void perf_start_clock(void)
+{
+	iowrite((1 << 0) | /* Timer Enable */
+		(1 << 3) | /* Auto-increment */
+		(0 << 8), /* Pre-scale */
+		SCU_GLOBAL_TIMER_CONTROL);
+}
+
+/* Compute mask for given delay in miliseconds*/
+static unsigned long get_number_of_cycles_for_delay(unsigned long delay)
+{
+	return (APU_FREQ / (2 * 1000)) * delay;
+}
+
+/* stop timer */
+static void perf_disable_clock(void)
+{
+	iowrite(0, SCU_GLOBAL_TIMER_CONTROL);
+}
+
+/* stop timer and reset timer count regs */
+static void perf_reset_clock(void)
+{
+	perf_disable_clock();
+	iowrite(0, SCU_GLOBAL_TIMER_COUNT_L32);
+	iowrite(0, SCU_GLOBAL_TIMER_COUNT_U32);
+}
+
+static void perf_reset_and_start_timer(void)
+{
+	perf_reset_clock();
+	perf_start_clock();
+}
+
+int __weak ps7_config(unsigned long *ps7_config_init)
+{
+	unsigned long *ptr = ps7_config_init;
+	unsigned long opcode;
+	unsigned long addr;
+	unsigned long val;
+	unsigned long mask;
+	unsigned int numargs;
+	int i;
+	unsigned long delay;
+
+	for (;;) {
+		opcode = ptr[0];
+		if (opcode == OPCODE_EXIT)
+			return PS7_INIT_SUCCESS;
+		addr = (opcode & OPCODE_ADDRESS_MASK);
+
+		switch (opcode & ~OPCODE_ADDRESS_MASK) {
+		case OPCODE_MASKWRITE:
+			numargs = 3;
+			mask = ptr[1];
+			val = ptr[2];
+			iowrite((ioread(addr) & ~mask) | (val & mask), addr);
+			break;
+
+		case OPCODE_WRITE:
+			numargs = 2;
+			val = ptr[1];
+			iowrite(val, addr);
+			break;
+
+		case OPCODE_MASKPOLL:
+			numargs = 2;
+			mask = ptr[1];
+			i = 0;
+			while (!(ioread(addr) & mask)) {
+				if (i == PS7_MASK_POLL_TIME)
+					return PS7_INIT_TIMEOUT;
+				i++;
+			}
+			break;
+
+		case OPCODE_MASKDELAY:
+			numargs = 2;
+			mask = ptr[1];
+			delay = get_number_of_cycles_for_delay(mask);
+			perf_reset_and_start_timer();
+			while (ioread(addr) < delay)
+				;
+			break;
+
+		default:
+			return PS7_INIT_CORRUPT;
+		}
+
+		ptr += numargs;
+	}
+}
+
+unsigned long __weak __maybe_unused ps7GetSiliconVersion(void)
+{
+	return zynq_get_silicon_version();
+}
diff --git a/roms/u-boot/arch/arm/mach-zynq/slcr.c b/roms/u-boot/arch/arm/mach-zynq/slcr.c
new file mode 100644
index 000000000..5d9f4d23f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/slcr.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2013 - 2017 Xilinx Inc.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+
+#define SLCR_LOCK_MAGIC		0x767B
+#define SLCR_UNLOCK_MAGIC	0xDF0D
+
+#define SLCR_NAND_L2_SEL		0x10
+#define SLCR_NAND_L2_SEL_MASK		0x1F
+
+#define SLCR_USB_L1_SEL			0x04
+
+#define SLCR_IDCODE_MASK	0x1F000
+#define SLCR_IDCODE_SHIFT	12
+
+/*
+ * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
+ *
+ * @peri_name: Name of the peripheral for checking MIO status
+ * @get_pins: Pointer to array of get pin for this peripheral
+ * @num_pins: Number of pins for this peripheral
+ * @mask: Mask value
+ * @check_val: Required check value to get the status of  periph
+ */
+struct zynq_slcr_mio_get_status {
+	const char *peri_name;
+	const int *get_pins;
+	int num_pins;
+	u32 mask;
+	u32 check_val;
+};
+
+static const int nand8_pins[] = {
+	0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
+};
+
+static const int nand16_pins[] = {
+	16, 17, 18, 19, 20, 21, 22, 23
+};
+
+static const int usb0_pins[] = {
+	28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
+};
+
+static const int usb1_pins[] = {
+	40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51
+};
+
+static const struct zynq_slcr_mio_get_status mio_periphs[] = {
+	{
+		"nand8",
+		nand8_pins,
+		ARRAY_SIZE(nand8_pins),
+		SLCR_NAND_L2_SEL_MASK,
+		SLCR_NAND_L2_SEL,
+	},
+	{
+		"nand16",
+		nand16_pins,
+		ARRAY_SIZE(nand16_pins),
+		SLCR_NAND_L2_SEL_MASK,
+		SLCR_NAND_L2_SEL,
+	},
+	{
+		"usb0",
+		usb0_pins,
+		ARRAY_SIZE(usb0_pins),
+		SLCR_USB_L1_SEL,
+		SLCR_USB_L1_SEL,
+	},
+	{
+		"usb1",
+		usb1_pins,
+		ARRAY_SIZE(usb1_pins),
+		SLCR_USB_L1_SEL,
+		SLCR_USB_L1_SEL,
+	},
+};
+
+static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
+
+void zynq_slcr_lock(void)
+{
+	if (!slcr_lock) {
+		writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
+		slcr_lock = 1;
+	}
+}
+
+void zynq_slcr_unlock(void)
+{
+	if (slcr_lock) {
+		writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
+		slcr_lock = 0;
+	}
+}
+
+/* Reset the entire system */
+void zynq_slcr_cpu_reset(void)
+{
+	/*
+	 * Unlock the SLCR then reset the system.
+	 * Note that this seems to require raw i/o
+	 * functions or there's a lockup?
+	 */
+	zynq_slcr_unlock();
+
+	/*
+	 * Clear 0x0F000000 bits of reboot status register to workaround
+	 * the FSBL not loading the bitstream after soft-reboot
+	 * This is a temporary solution until we know more.
+	 */
+	clrbits_le32(&slcr_base->reboot_status, 0xF000000);
+
+	writel(1, &slcr_base->pss_rst_ctrl);
+}
+
+void zynq_slcr_devcfg_disable(void)
+{
+	u32 reg_val;
+
+	zynq_slcr_unlock();
+
+	/* Disable AXI interface by asserting FPGA resets */
+	writel(0xF, &slcr_base->fpga_rst_ctrl);
+
+	/* Disable Level shifters before setting PS-PL */
+	reg_val = readl(&slcr_base->lvl_shftr_en);
+	reg_val &= ~0xF;
+	writel(reg_val, &slcr_base->lvl_shftr_en);
+
+	/* Set Level Shifters DT618760 */
+	writel(0xA, &slcr_base->lvl_shftr_en);
+
+	zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_enable(void)
+{
+	zynq_slcr_unlock();
+
+	/* Set Level Shifters DT618760 */
+	writel(0xF, &slcr_base->lvl_shftr_en);
+
+	/* Enable AXI interface by de-asserting FPGA resets */
+	writel(0x0, &slcr_base->fpga_rst_ctrl);
+
+	zynq_slcr_lock();
+}
+
+u32 zynq_slcr_get_boot_mode(void)
+{
+	/* Get the bootmode register value */
+	return readl(&slcr_base->boot_mode);
+}
+
+u32 zynq_slcr_get_idcode(void)
+{
+	return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
+							SLCR_IDCODE_SHIFT;
+}
+
+/*
+ * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
+ *
+ * @periph: Name of the peripheral
+ *
+ * Returns count to indicate the number of pins configured for the
+ * given @periph.
+ */
+int zynq_slcr_get_mio_pin_status(const char *periph)
+{
+	const struct zynq_slcr_mio_get_status *mio_ptr;
+	int val, j;
+	int mio = 0;
+	u32 i;
+
+	for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
+		if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
+			mio_ptr = &mio_periphs[i];
+			for (j = 0; j < mio_ptr->num_pins; j++) {
+				val = readl(&slcr_base->mio_pin
+						[mio_ptr->get_pins[j]]);
+				if ((val & mio_ptr->mask) == mio_ptr->check_val)
+					mio++;
+			}
+			break;
+		}
+	}
+
+	return mio;
+}
diff --git a/roms/u-boot/arch/arm/mach-zynq/spl.c b/roms/u-boot/arch/arm/mach-zynq/spl.c
new file mode 100644
index 000000000..d09141c3b
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/spl.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 - 2017 Xilinx, Inc. Michal Simek
+ */
+#include <common.h>
+#include <debug_uart.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/spl.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/ps7_init_gpl.h>
+
+void board_init_f(ulong dummy)
+{
+	ps7_init();
+
+	arch_cpu_init();
+
+#ifdef CONFIG_DEBUG_UART
+	/* Uart debug for sure */
+	debug_uart_init();
+	puts("Debug uart enabled\n"); /* or printch() */
+#endif
+}
+
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void)
+{
+	preloader_console_init();
+#if defined(CONFIG_ARCH_EARLY_INIT_R) && defined(CONFIG_SPL_FPGA)
+	arch_early_init_r();
+#endif
+	board_init();
+}
+#endif
+
+u32 spl_boot_device(void)
+{
+	u32 mode;
+
+	switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
+#ifdef CONFIG_SPL_SPI_SUPPORT
+	case ZYNQ_BM_QSPI:
+		mode = BOOT_DEVICE_SPI;
+		break;
+#endif
+	case ZYNQ_BM_NAND:
+		mode = BOOT_DEVICE_NAND;
+		break;
+	case ZYNQ_BM_NOR:
+		mode = BOOT_DEVICE_NOR;
+		break;
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case ZYNQ_BM_SD:
+		mode = BOOT_DEVICE_MMC1;
+		break;
+#endif
+	case ZYNQ_BM_JTAG:
+		mode = BOOT_DEVICE_RAM;
+		break;
+	default:
+		puts("Unsupported boot mode selected\n");
+		hang();
+	}
+
+	return mode;
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	/* boot linux */
+	return 0;
+}
+#endif
+
+void spl_board_prepare_for_boot(void)
+{
+	ps7_post_config();
+	debug("SPL bye\n");
+}
diff --git a/roms/u-boot/arch/arm/mach-zynq/timer.c b/roms/u-boot/arch/arm/mach-zynq/timer.c
new file mode 100644
index 000000000..a51822a53
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/timer.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Weidmüller Interface GmbH & Co. KG
+ * Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
+ *
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2011-2017 Xilinx, Inc. All rights reserved.
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <div64.h>
+#include <dm.h>
+#include <init.h>
+#include <time.h>
+#include <malloc.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct scu_timer {
+	u32 load; /* Timer Load Register */
+	u32 counter; /* Timer Counter Register */
+	u32 control; /* Timer Control Register */
+};
+
+static struct scu_timer *timer_base =
+			      (struct scu_timer *)ZYNQ_SCUTIMER_BASEADDR;
+
+#define SCUTIMER_CONTROL_PRESCALER_MASK	0x0000FF00 /* Prescaler */
+#define SCUTIMER_CONTROL_PRESCALER_SHIFT	8
+#define SCUTIMER_CONTROL_AUTO_RELOAD_MASK	0x00000002 /* Auto-reload */
+#define SCUTIMER_CONTROL_ENABLE_MASK		0x00000001 /* Timer enable */
+
+#define TIMER_LOAD_VAL 0xFFFFFFFF
+#define TIMER_PRESCALE 255
+
+int timer_init(void)
+{
+	const u32 emask = SCUTIMER_CONTROL_AUTO_RELOAD_MASK |
+			(TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
+			SCUTIMER_CONTROL_ENABLE_MASK;
+
+	struct udevice *dev;
+	struct clk clk;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+		DM_DRIVER_GET(zynq_clk), &dev);
+	if (ret)
+		return ret;
+
+	clk.id = cpu_6or4x_clk;
+	ret = clk_request(dev, &clk);
+	if (ret < 0)
+		return ret;
+
+	gd->cpu_clk = clk_get_rate(&clk);
+
+	clk_free(&clk);
+
+	gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
+
+	/* Load the timer counter register */
+	writel(0xFFFFFFFF, &timer_base->load);
+
+	/*
+	 * Start the A9Timer device
+	 * Enable Auto reload mode, Clear prescaler control bits
+	 * Set prescaler value, Enable the decrementer
+	 */
+	clrsetbits_le32(&timer_base->control, SCUTIMER_CONTROL_PRESCALER_MASK,
+								emask);
+
+	/* Reset time */
+	gd->arch.lastinc = readl(&timer_base->counter) /
+				(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
+	gd->arch.tbl = 0;
+
+	return 0;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}
diff --git a/roms/u-boot/arch/arm/mach-zynq/u-boot-spl.lds b/roms/u-boot/arch/arm/mach-zynq/u-boot-spl.lds
new file mode 100644
index 000000000..106d2e390
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/u-boot-spl.lds
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2014 Xilinx, Inc. Michal Simek
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\
+		LENGTH = IMAGE_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = ALIGN(4);
+	.text :
+	{
+		__image_copy_start = .;
+		*(.vectors)
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	} > .sram
+
+	. = ALIGN(4);
+	.rodata : {
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	} > .sram
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	} > .sram
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	} > .sram
+
+	. = ALIGN(4);
+
+	_image_binary_end = .;
+
+	_end = .;
+
+	/* Move BSS section to RAM because of FAT */
+	.bss (NOLOAD) : {
+		__bss_start = .;
+		*(.bss*)
+		 . = ALIGN(4);
+		__bss_end = .;
+	} > .sdram
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
diff --git a/roms/u-boot/arch/arm/mach-zynq/u-boot.lds b/roms/u-boot/arch/arm/mach-zynq/u-boot.lds
new file mode 100644
index 000000000..91c32e89e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynq/u-boot.lds
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		*(.__image_copy_start)
+		*(.vectors)
+		CPUDIR/start.o (.text*)
+	}
+
+	/* This needs to come before *(.text*) */
+	.__efi_runtime_start : {
+		*(.__efi_runtime_start)
+	}
+
+	.efi_runtime : {
+		*(.text.efi_runtime*)
+		*(.rodata.efi_runtime*)
+		*(.data.efi_runtime*)
+	}
+
+	.__efi_runtime_stop : {
+		*(.__efi_runtime_stop)
+	}
+
+	.text_rest :
+	{
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+
+	. = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(4);
+
+	.efi_runtime_rel_start :
+	{
+		*(.__efi_runtime_rel_start)
+	}
+
+	.efi_runtime_rel : {
+		*(.rel*.efi_runtime)
+		*(.rel*.efi_runtime.*)
+	}
+
+	.efi_runtime_rel_stop :
+	{
+		*(.__efi_runtime_rel_stop)
+	}
+
+	. = ALIGN(4);
+	.image_copy_end :
+	{
+		*(.__image_copy_end)
+	}
+
+	.rel_dyn_start :
+	{
+		*(.__rel_dyn_start)
+	}
+
+	.rel.dyn : {
+		*(.rel*)
+	}
+
+	.rel_dyn_end :
+	{
+		*(.__rel_dyn_end)
+	}
+
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+		__bss_base = .;
+	}
+
+	.bss __bss_base (OVERLAY) : {
+		*(.bss*)
+		 . = ALIGN(4);
+		 __bss_limit = .;
+	}
+
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
+	}
+
+	/*
+	 * Zynq needs to discard these sections because the user
+	 * is expected to pass this image on to tools for boot.bin
+	 * generation that require them to be dropped.
+	 */
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynbss*) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
+}
diff --git a/roms/u-boot/arch/arm/mach-zynqmp-r5/Kconfig b/roms/u-boot/arch/arm/mach-zynqmp-r5/Kconfig
new file mode 100644
index 000000000..5e0175413
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp-r5/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+
+if ARCH_ZYNQMP_R5
+
+config SYS_BOARD
+	string "Board name"
+	default "zynqmp_r5"
+
+config SYS_VENDOR
+	string "Vendor name"
+	default "xilinx"
+
+config SYS_SOC
+	default "zynqmp-r5"
+
+config SYS_CONFIG_NAME
+	string "Board configuration name"
+	default "xilinx_zynqmp_r5"
+	help
+	  This option contains information about board configuration name.
+	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+	  will be used for board configuration.
+
+config SYS_MALLOC_F_LEN
+	default 0x600
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-zynqmp-r5/Makefile b/roms/u-boot/arch/arm/mach-zynqmp-r5/Makefile
new file mode 100644
index 000000000..0d39e97dd
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp-r5/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-y	+= cpu.o
diff --git a/roms/u-boot/arch/arm/mach-zynqmp-r5/cpu.c b/roms/u-boot/arch/arm/mach-zynqmp-r5/cpu.c
new file mode 100644
index 000000000..0d368443d
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp-r5/cpu.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Xilinx, Inc. (Michal Simek)
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <asm/armv7_mpu.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct mpu_region_config region_config[] = {
+	{ 0x00000000, REGION_0, XN_EN, PRIV_RW_USR_RW,
+	  SHARED_WRITE_BUFFERED, REGION_4GB },
+	{ 0x00000000, REGION_1, XN_DIS, PRIV_RW_USR_RW,
+	  O_I_WB_RD_WR_ALLOC, REGION_1GB },
+};
+
+int arch_cpu_init(void)
+{
+	gd->cpu_clk = CONFIG_CPU_FREQ_HZ;
+
+	setup_mpu_regions(region_config, ARRAY_SIZE(region_config));
+
+	return 0;
+}
+
+/*
+ * Perform the low-level reset.
+ */
+void reset_cpu(void)
+{
+	while (1)
+		;
+}
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/Kconfig b/roms/u-boot/arch/arm/mach-zynqmp/Kconfig
new file mode 100644
index 000000000..f1301f666
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/Kconfig
@@ -0,0 +1,177 @@
+if ARCH_ZYNQMP
+
+config SPL_FS_FAT
+	default y
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBDISK_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_MMC_SUPPORT
+	default y if MMC_SDHCI_ZYNQ
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config SPL_SPI_FLASH_SUPPORT
+	default y if ZYNQ_QSPI
+
+config SPL_SPI_SUPPORT
+	default y if ZYNQ_QSPI
+
+config SYS_BOARD
+	default "zynqmp"
+
+config SYS_VENDOR
+	string "Vendor name"
+	default "xilinx"
+
+config SYS_SOC
+	default "zynqmp"
+
+config SYS_CONFIG_NAME
+	string "Board configuration name"
+	default "xilinx_zynqmp"
+	help
+	  This option contains information about board configuration name.
+	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+	  will be used for board configuration.
+
+config SYS_MEM_RSVD_FOR_MMU
+	bool "Reserve memory for MMU Table"
+	help
+	  If defined this option is used to setup different space for
+	  MMU table than the one which will be allocated during
+	  relocation.
+
+config BOOT_INIT_FILE
+	string "boot.bin init register filename"
+	depends on SPL
+	default ""
+	help
+	  Add register writes to boot.bin format (max 256 pairs).
+	  Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
+
+config PMUFW_INIT_FILE
+	string "PMU firmware"
+	depends on SPL
+	default ""
+	help
+	  Include external PMUFW (Platform Management Unit FirmWare) to
+	  a Xilinx bootable image (boot.bin).
+
+config ZYNQMP_SPL_PM_CFG_OBJ_FILE
+	string "PMU firmware configuration object to load at runtime by SPL"
+	depends on SPL
+	help
+	  Path to a binary PMU firmware configuration object to be linked
+	  into U-Boot SPL and loaded at runtime into the PMU firmware.
+
+	  The ZynqMP Power Management Unit (PMU) needs a configuration
+	  object for most SoC peripherals to work. To have it loaded by
+	  U-Boot SPL set here the file name (absolute path or relative to
+	  the top source tree) of your configuration, which must be a
+	  binary blob. It will be linked in the SPL binary and loaded
+	  into the PMU firmware by U-Boot SPL during board
+	  initialization.
+
+	  Leave this option empty if your PMU firmware has a hard-coded
+	  configuration object or you are loading it by any other means.
+
+config ZYNQMP_USB
+	bool "Configure ZynqMP USB"
+
+config ZYNQMP_NO_DDR
+	bool "Disable DDR MMU mapping"
+	help
+	  This option configures MMU with no DDR to avoid speculative
+	  access to DDR memory where DDR is not present.
+
+config SYS_MALLOC_F_LEN
+	default 0x600
+
+config DEFINE_TCM_OCM_MMAP
+	bool "Define TCM and OCM memory in MMU Table"
+	default y if MP
+	help
+	  This option if enabled defines the TCM and OCM memory and its
+	  memory attributes in MMU table entry.
+
+config ZYNQMP_PSU_INIT_ENABLED
+	bool "Include psu_init"
+	help
+	  Include psu_init to full u-boot. SPL include psu_init by default.
+
+config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+	bool "Overwrite SPL bootmode"
+	depends on SPL
+	help
+	  Overwrite bootmode selected via boot mode pins to tell SPL what should
+	  be the next boot device.
+
+config ZYNQ_SDHCI_MAX_FREQ
+	default 200000000
+
+config SPL_ZYNQMP_ALT_BOOTMODE
+	hex
+	default 0x0 if JTAG_MODE
+	default 0x1 if QSPI_MODE_24BIT
+	default 0x2 if QSPI_MODE_32BIT
+	default 0x3 if SD_MODE
+	default 0x4 if NAND_MODE
+	default 0x5 if SD_MODE1
+	default 0x6 if EMMC_MODE
+	default 0x7 if USB_MODE
+	default 0xa if SW_USBHOST_MODE
+	default 0xb if SW_SATA_MODE
+	default 0xe if SD1_LSHFT_MODE
+
+choice
+	prompt "Boot mode"
+	depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+	default JTAG_MODE
+
+config JTAG_MODE
+	bool "JTAG_MODE"
+
+config QSPI_MODE_24BIT
+	bool "QSPI_MODE_24BIT"
+
+config QSPI_MODE_32BIT
+	bool "QSPI_MODE_32BIT"
+
+config SD_MODE
+	bool "SD_MODE"
+
+config SD_MODE1
+	bool "SD_MODE1"
+
+config NAND_MODE
+	bool "NAND_MODE"
+
+config EMMC_MODE
+	bool "EMMC_MODE"
+
+config USB_MODE
+	bool "USB"
+
+config SW_USBHOST_MODE
+	bool "SW USBHOST_MODE"
+
+config SW_SATA_MODE
+	bool "SW SATA_MODE"
+
+config SD1_LSHFT_MODE
+	bool "SD1_LSHFT_MODE"
+
+endchoice
+
+source "board/xilinx/Kconfig"
+source "board/xilinx/zynqmp/Kconfig"
+
+endif
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/Makefile b/roms/u-boot/arch/arm/mach-zynqmp/Makefile
new file mode 100644
index 000000000..8a3b07472
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2014 - 2015 Xilinx, Inc.
+# Michal Simek <michal.simek@xilinx.com>
+
+obj-y	+= clk.o
+obj-y	+= cpu.o
+obj-$(CONFIG_MP)	+= mp.o
+obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o
+obj-$(CONFIG_ZYNQMP_PSU_INIT_ENABLED)	+= psu_spl_init.o
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/clk.c b/roms/u-boot/arch/arm/mach-zynqmp/clk.c
new file mode 100644
index 000000000..1e6e726e8
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/clk.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned long zynqmp_get_system_timer_freq(void)
+{
+	u32 ver = zynqmp_get_silicon_version();
+
+	switch (ver) {
+	case ZYNQMP_CSU_VERSION_QEMU:
+		return 50000000;
+	}
+
+	return 100000000;
+}
+
+#ifdef CONFIG_CLOCKS
+/**
+ * set_cpu_clk_info() - Initialize clock framework
+ * Always returns zero.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+	gd->cpu_clk = get_tbclk();
+
+	gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+
+	gd->bd->bi_dsp_freq = 0;
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/cpu.c b/roms/u-boot/arch/arm/mach-zynqmp/cpu.c
new file mode 100644
index 000000000..29743cae5
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/cpu.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <time.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/armv8/mmu.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <zynqmp_firmware.h>
+#include <asm/cache.h>
+
+#define ZYNQ_SILICON_VER_MASK	0xF000
+#define ZYNQ_SILICON_VER_SHIFT	12
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Number of filled static entries and also the first empty
+ * slot in zynqmp_mem_map.
+ */
+#define ZYNQMP_MEM_MAP_USED	4
+
+#if !defined(CONFIG_ZYNQMP_NO_DDR)
+#define DRAM_BANKS CONFIG_NR_DRAM_BANKS
+#else
+#define DRAM_BANKS 0
+#endif
+
+#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+#define TCM_MAP 1
+#else
+#define TCM_MAP 0
+#endif
+
+/* +1 is end of list which needs to be empty */
+#define ZYNQMP_MEM_MAP_MAX (ZYNQMP_MEM_MAP_USED + DRAM_BANKS + TCM_MAP + 1)
+
+static struct mm_region zynqmp_mem_map[ZYNQMP_MEM_MAP_MAX] = {
+	{
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x70000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0xf8000000UL,
+		.phys = 0xf8000000UL,
+		.size = 0x07e00000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x400000000UL,
+		.phys = 0x400000000UL,
+		.size = 0x400000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x1000000000UL,
+		.phys = 0x1000000000UL,
+		.size = 0xf000000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}
+};
+
+void mem_map_fill(void)
+{
+	int banks = ZYNQMP_MEM_MAP_USED;
+
+#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+	zynqmp_mem_map[banks].virt = 0xffe00000UL;
+	zynqmp_mem_map[banks].phys = 0xffe00000UL;
+	zynqmp_mem_map[banks].size = 0x00200000UL;
+	zynqmp_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+				      PTE_BLOCK_INNER_SHARE;
+	banks = banks + 1;
+#endif
+
+#if !defined(CONFIG_ZYNQMP_NO_DDR)
+	for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		/* Zero size means no more DDR that's this is end */
+		if (!gd->bd->bi_dram[i].size)
+			break;
+
+		zynqmp_mem_map[banks].virt = gd->bd->bi_dram[i].start;
+		zynqmp_mem_map[banks].phys = gd->bd->bi_dram[i].start;
+		zynqmp_mem_map[banks].size = gd->bd->bi_dram[i].size;
+		zynqmp_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+					      PTE_BLOCK_INNER_SHARE;
+		banks = banks + 1;
+	}
+#endif
+}
+
+struct mm_region *mem_map = zynqmp_mem_map;
+
+u64 get_page_table_size(void)
+{
+	return 0x14000;
+}
+
+#if defined(CONFIG_SYS_MEM_RSVD_FOR_MMU) || defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+void tcm_init(u8 mode)
+{
+	puts("WARNING: Initializing TCM overwrites TCM content\n");
+	initialize_tcm(mode);
+	memset((void *)ZYNQMP_TCM_BASE_ADDR, 0, ZYNQMP_TCM_SIZE);
+}
+#endif
+
+#ifdef CONFIG_SYS_MEM_RSVD_FOR_MMU
+int arm_reserve_mmu(void)
+{
+	tcm_init(TCM_LOCK);
+	gd->arch.tlb_size = PGTABLE_SIZE;
+	gd->arch.tlb_addr = ZYNQMP_TCM_BASE_ADDR;
+
+	return 0;
+}
+#endif
+
+static unsigned int zynqmp_get_silicon_version_secure(void)
+{
+	u32 ver;
+
+	ver = readl(&csu_base->version);
+	ver &= ZYNQMP_SILICON_VER_MASK;
+	ver >>= ZYNQMP_SILICON_VER_SHIFT;
+
+	return ver;
+}
+
+unsigned int zynqmp_get_silicon_version(void)
+{
+	if (current_el() == 3)
+		return zynqmp_get_silicon_version_secure();
+
+	gd->cpu_clk = get_tbclk();
+
+	switch (gd->cpu_clk) {
+	case 50000000:
+		return ZYNQMP_CSU_VERSION_QEMU;
+	}
+
+	return ZYNQMP_CSU_VERSION_SILICON;
+}
+
+static int zynqmp_mmio_rawwrite(const u32 address,
+		      const u32 mask,
+		      const u32 value)
+{
+	u32 data;
+	u32 value_local = value;
+	int ret;
+
+	ret = zynqmp_mmio_read(address, &data);
+	if (ret)
+		return ret;
+
+	data &= ~mask;
+	value_local &= mask;
+	value_local |= data;
+	writel(value_local, (ulong)address);
+	return 0;
+}
+
+static int zynqmp_mmio_rawread(const u32 address, u32 *value)
+{
+	*value = readl((ulong)address);
+	return 0;
+}
+
+int zynqmp_mmio_write(const u32 address,
+		      const u32 mask,
+		      const u32 value)
+{
+	if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3)
+		return zynqmp_mmio_rawwrite(address, mask, value);
+#if defined(CONFIG_ZYNQMP_FIRMWARE)
+	else
+		return xilinx_pm_request(PM_MMIO_WRITE, address, mask,
+					 value, 0, NULL);
+#endif
+
+	return -EINVAL;
+}
+
+int zynqmp_mmio_read(const u32 address, u32 *value)
+{
+	u32 ret = -EINVAL;
+
+	if (!value)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
+		ret = zynqmp_mmio_rawread(address, value);
+	}
+#if defined(CONFIG_ZYNQMP_FIRMWARE)
+	else {
+		u32 ret_payload[PAYLOAD_ARG_CNT];
+
+		ret = xilinx_pm_request(PM_MMIO_READ, address, 0, 0,
+					0, ret_payload);
+		*value = ret_payload[1];
+	}
+#endif
+
+	return ret;
+}
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/handoff.c b/roms/u-boot/arch/arm/mach-zynqmp/handoff.c
new file mode 100644
index 000000000..7d7ab9da6
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/handoff.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 - 2017 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * atfhandoffparams
+ * Parameter	bitfield	encoding
+ * -----------------------------------------------------------------------------
+ * Exec State	0	0 -> Aarch64, 1-> Aarch32
+ * endianness	1	0 -> LE, 1 -> BE
+ * secure (TZ)	2	0 -> Non secure, 1 -> secure
+ * EL		3:4	00 -> EL0, 01 -> EL1, 10 -> EL2, 11 -> EL3
+ * CPU#		5:6	00 -> A53_0, 01 -> A53_1, 10 -> A53_2, 11 -> A53_3
+ */
+
+#define FSBL_FLAGS_ESTATE_SHIFT		0
+#define FSBL_FLAGS_ESTATE_MASK		(1 << FSBL_FLAGS_ESTATE_SHIFT)
+#define FSBL_FLAGS_ESTATE_A64		0
+#define FSBL_FLAGS_ESTATE_A32		1
+
+#define FSBL_FLAGS_ENDIAN_SHIFT		1
+#define FSBL_FLAGS_ENDIAN_MASK		(1 << FSBL_FLAGS_ENDIAN_SHIFT)
+#define FSBL_FLAGS_ENDIAN_LE		0
+#define FSBL_FLAGS_ENDIAN_BE		1
+
+#define FSBL_FLAGS_TZ_SHIFT		2
+#define FSBL_FLAGS_TZ_MASK		(1 << FSBL_FLAGS_TZ_SHIFT)
+#define FSBL_FLAGS_NON_SECURE		0
+#define FSBL_FLAGS_SECURE		1
+
+#define FSBL_FLAGS_EL_SHIFT		3
+#define FSBL_FLAGS_EL_MASK		(3 << FSBL_FLAGS_EL_SHIFT)
+#define FSBL_FLAGS_EL0			0
+#define FSBL_FLAGS_EL1			1
+#define FSBL_FLAGS_EL2			2
+#define FSBL_FLAGS_EL3			3
+
+#define FSBL_FLAGS_CPU_SHIFT		5
+#define FSBL_FLAGS_CPU_MASK		(3 << FSBL_FLAGS_CPU_SHIFT)
+#define FSBL_FLAGS_A53_0		0
+#define FSBL_FLAGS_A53_1		1
+#define FSBL_FLAGS_A53_2		2
+#define FSBL_FLAGS_A53_3		3
+
+#define FSBL_MAX_PARTITIONS		8
+
+/* Structure corresponding to each partition entry */
+struct xfsbl_partition {
+	uint64_t entry_point;
+	uint64_t flags;
+};
+
+/* Structure for handoff parameters to ARM Trusted Firmware (ATF) */
+struct xfsbl_atf_handoff_params {
+	uint8_t magic[4];
+	uint32_t num_entries;
+	struct xfsbl_partition partition[FSBL_MAX_PARTITIONS];
+};
+
+#ifdef CONFIG_SPL_ATF
+struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl32_entry,
+					     uintptr_t bl33_entry,
+					     uintptr_t fdt_addr)
+{
+	struct xfsbl_atf_handoff_params *atfhandoffparams;
+
+	atfhandoffparams = (void *)CONFIG_SPL_TEXT_BASE;
+	atfhandoffparams->magic[0] = 'X';
+	atfhandoffparams->magic[1] = 'L';
+	atfhandoffparams->magic[2] = 'N';
+	atfhandoffparams->magic[3] = 'X';
+
+	atfhandoffparams->num_entries = 0;
+	if (bl33_entry) {
+		atfhandoffparams->partition[0].entry_point = bl33_entry;
+		atfhandoffparams->partition[0].flags = FSBL_FLAGS_EL2 <<
+						       FSBL_FLAGS_EL_SHIFT;
+		atfhandoffparams->num_entries++;
+	}
+
+	writel(CONFIG_SPL_TEXT_BASE, &pmu_base->gen_storage6);
+
+	return NULL;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/include/mach/clk.h b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/clk.h
new file mode 100644
index 000000000..cfd44c8e0
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/clk.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#ifndef _ASM_ARCH_CLK_H_
+#define _ASM_ARCH_CLK_H_
+
+unsigned long zynqmp_get_system_timer_freq(void);
+
+#endif /* _ASM_ARCH_CLK_H_ */
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/gpio.h
new file mode 100644
index 000000000..542a5fc3e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Xilinx, Inc.
+ */
+
+#ifndef __ARCH_ZYNQMP_GPIO_H
+#define __ARCH_ZYNQMP_GPIO_H
+
+/* Empty file - sdhci requires this. */
+
+#endif
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/include/mach/hardware.h b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/hardware.h
new file mode 100644
index 000000000..a798aa0eb
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/hardware.h
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define ZYNQMP_TCM_BASE_ADDR	0xFFE00000
+#define ZYNQMP_TCM_SIZE		0x40000
+
+#define ZYNQMP_CRL_APB_BASEADDR	0xFF5E0000
+#define ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT	0x1000000
+#define ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT	0
+#define ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_VAL_SHIFT	8
+
+#define ZYNQMP_AMS_PS_SYSMON_BASEADDR      0XFFA50800
+#define ZYNQMP_AMS_PS_SYSMON_ANALOG_BUS ((ZYNQMP_AMS_PS_SYSMON_BASEADDR) \
+							    + 0x00000114)
+#define ZYNQMP_PS_SYSMON_ANALOG_BUS_VAL 0x00003210
+
+#define PS_MODE0	BIT(0)
+#define PS_MODE1	BIT(1)
+#define PS_MODE2	BIT(2)
+#define PS_MODE3	BIT(3)
+
+#define RESET_REASON_DEBUG_SYS	BIT(6)
+#define RESET_REASON_SOFT	BIT(5)
+#define RESET_REASON_SRST	BIT(4)
+#define RESET_REASON_PSONLY	BIT(3)
+#define RESET_REASON_PMU	BIT(2)
+#define RESET_REASON_INTERNAL	BIT(1)
+#define RESET_REASON_EXTERNAL	BIT(0)
+
+struct crlapb_regs {
+	u32 reserved0[36];
+	u32 cpu_r5_ctrl; /* 0x90 */
+	u32 reserved1[37];
+	u32 timestamp_ref_ctrl; /* 0x128 */
+	u32 reserved2[53];
+	u32 boot_mode; /* 0x200 */
+	u32 reserved3_0[7];
+	u32 reset_reason; /* 0x220 */
+	u32 reserved3_1[6];
+	u32 rst_lpd_top; /* 0x23C */
+	u32 reserved4[4];
+	u32 boot_pin_ctrl; /* 0x250 */
+	u32 reserved5[21];
+};
+
+#define crlapb_base ((struct crlapb_regs *)ZYNQMP_CRL_APB_BASEADDR)
+
+#define ZYNQMP_IOU_SCNTR_SECURE	0xFF260000
+#define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN	0x1
+#define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG	0x2
+
+struct iou_scntr_secure {
+	u32 counter_control_register;
+	u32 reserved0[7];
+	u32 base_frequency_id_register;
+};
+
+#define iou_scntr_secure ((struct iou_scntr_secure *)ZYNQMP_IOU_SCNTR_SECURE)
+
+/* Bootmode setting values */
+#define BOOT_MODES_MASK	0x0000000F
+#define QSPI_MODE_24BIT	0x00000001
+#define QSPI_MODE_32BIT	0x00000002
+#define SD_MODE		0x00000003 /* sd 0 */
+#define SD_MODE1	0x00000005 /* sd 1 */
+#define NAND_MODE	0x00000004
+#define EMMC_MODE	0x00000006
+#define USB_MODE	0x00000007
+#define SD1_LSHFT_MODE	0x0000000E /* SD1 Level shifter */
+#define JTAG_MODE	0x00000000
+#define BOOT_MODE_USE_ALT	0x100
+#define BOOT_MODE_ALT_SHIFT	12
+/* SW secondary boot modes 0xa - 0xd */
+#define SW_USBHOST_MODE	0x0000000A
+#define SW_SATA_MODE	0x0000000B
+
+#define ZYNQMP_IOU_SLCR_BASEADDR	0xFF180000
+
+struct iou_slcr_regs {
+	u32 mio_pin[78];
+	u32 reserved[442];
+};
+
+#define slcr_base ((struct iou_slcr_regs *)ZYNQMP_IOU_SLCR_BASEADDR)
+
+#define ZYNQMP_RPU_BASEADDR	0xFF9A0000
+
+struct rpu_regs {
+	u32 rpu_glbl_ctrl;
+	u32 reserved0[63];
+	u32 rpu0_cfg; /* 0x100 */
+	u32 reserved1[63];
+	u32 rpu1_cfg; /* 0x200 */
+};
+
+#define rpu_base ((struct rpu_regs *)ZYNQMP_RPU_BASEADDR)
+
+#define ZYNQMP_CRF_APB_BASEADDR	0xFD1A0000
+
+struct crfapb_regs {
+	u32 reserved0[65];
+	u32 rst_fpd_apu; /* 0x104 */
+	u32 reserved1;
+};
+
+#define crfapb_base ((struct crfapb_regs *)ZYNQMP_CRF_APB_BASEADDR)
+
+#define ZYNQMP_APU_BASEADDR	0xFD5C0000
+
+struct apu_regs {
+	u32 reserved0[16];
+	u32 rvbar_addr0_l; /* 0x40 */
+	u32 rvbar_addr0_h; /* 0x44 */
+	u32 reserved1[20];
+};
+
+#define apu_base ((struct apu_regs *)ZYNQMP_APU_BASEADDR)
+
+/* Board version value */
+#define ZYNQMP_CSU_BASEADDR		0xFFCA0000
+#define ZYNQMP_CSU_VERSION_SILICON	0x0
+#define ZYNQMP_CSU_VERSION_QEMU		0x3
+
+#define ZYNQMP_CSU_VERSION_EMPTY_SHIFT		20
+
+#define ZYNQMP_SILICON_VER_MASK		0xF
+#define ZYNQMP_SILICON_VER_SHIFT	0
+
+struct csu_regs {
+	u32 reserved0[4];
+	u32 multi_boot;
+	u32 reserved1[11];
+	u32 idcode;
+	u32 version;
+};
+
+#define csu_base ((struct csu_regs *)ZYNQMP_CSU_BASEADDR)
+
+#define ZYNQMP_PMU_BASEADDR	0xFFD80000
+
+struct pmu_regs {
+	u32 reserved[18];
+	u32 gen_storage6; /* 0x48 */
+};
+
+#define pmu_base ((struct pmu_regs *)ZYNQMP_PMU_BASEADDR)
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h
new file mode 100644
index 000000000..e37acda2f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _PSU_INIT_GPL_H_ /* prevent circular inclusions */
+#define _PSU_INIT_GPL_H_
+
+#include <asm/io.h>
+#include <common.h>
+
+int mask_pollonvalue(unsigned long add, u32 mask, u32 value);
+
+int mask_poll(u32 add, u32 mask);
+
+u32 mask_read(u32 add, u32 mask);
+
+void mask_delay(u32 delay);
+
+void psu_mask_write(unsigned long offset, unsigned long mask,
+		    unsigned long val);
+
+void prog_reg(unsigned long addr, unsigned long mask,
+	      unsigned long shift, unsigned long value);
+
+int psu_init(void);
+unsigned long psu_post_config_data(void);
+
+#endif /* _PSU_INIT_GPL_H_ */
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/include/mach/sys_proto.h b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/sys_proto.h
new file mode 100644
index 000000000..1c12eac71
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/include/mach/sys_proto.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#ifndef _ASM_ARCH_SYS_PROTO_H
+#define _ASM_ARCH_SYS_PROTO_H
+
+#define ZYNQMP_CSU_SILICON_VER_MASK	0xF
+#define KEY_PTR_LEN	32
+#define IV_SIZE		12
+#define RSA_KEY_SIZE	512
+#define MODULUS_LEN	512
+#define PRIV_EXPO_LEN	512
+#define PUB_EXPO_LEN	4
+
+#define ZYNQMP_SHA3_INIT	1
+#define ZYNQMP_SHA3_UPDATE	2
+#define ZYNQMP_SHA3_FINAL	4
+#define ZYNQMP_SHA3_SIZE	48
+
+#define ZYNQMP_FPGA_BIT_AUTH_DDR	1
+#define ZYNQMP_FPGA_BIT_AUTH_OCM	2
+#define ZYNQMP_FPGA_BIT_ENC_USR_KEY	3
+#define ZYNQMP_FPGA_BIT_ENC_DEV_KEY	4
+#define ZYNQMP_FPGA_BIT_NS		5
+
+#define ZYNQMP_FPGA_AUTH_DDR	1
+
+enum {
+	IDCODE,
+	VERSION,
+	IDCODE2,
+};
+
+enum {
+	ZYNQMP_SILICON_V1,
+	ZYNQMP_SILICON_V2,
+	ZYNQMP_SILICON_V3,
+	ZYNQMP_SILICON_V4,
+};
+
+enum {
+	TCM_LOCK,
+	TCM_SPLIT,
+};
+
+struct zynqmp_ipi_msg {
+	size_t len;
+	u32 *buf;
+};
+
+int zynq_board_read_rom_ethaddr(unsigned char *ethaddr);
+unsigned int zynqmp_get_silicon_version(void);
+
+int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value);
+int zynqmp_mmio_read(const u32 address, u32 *value);
+
+void initialize_tcm(bool mode);
+void mem_map_fill(void);
+#if defined(CONFIG_SYS_MEM_RSVD_FOR_MMU) || defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+void tcm_init(u8 mode);
+#endif
+
+#endif /* _ASM_ARCH_SYS_PROTO_H */
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/roms/u-boot/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
new file mode 100755
index 000000000..92e31849f
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
@@ -0,0 +1,136 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# script to generate FIT image source for Xilinx ZynqMP boards with
+# ARM Trusted Firmware and multiple device trees (given on the command line)
+#
+# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+
+BL33="u-boot-nodtb.bin"
+[ -z "$BL31" ] && BL31="bl31.bin"
+# Can be also done as ${CROSS_COMPILE}readelf -l bl31.elf | awk '/Entry point/ { print $3 }'
+[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0xfffea000"
+
+if [ -z "$BL33_LOAD_ADDR" ];then
+	BL33_LOAD_ADDR=`awk '/CONFIG_SYS_TEXT_BASE/ { print $3 }' include/generated/autoconf.h`
+fi
+
+DTB_LOAD_ADDR=`awk '/CONFIG_XILINX_OF_BOARD_DTB_ADDR/ { print $3 }' include/generated/autoconf.h`
+if [ ! -z "$DTB_LOAD_ADDR" ]; then
+	DTB_LOAD="load = <$DTB_LOAD_ADDR>;"
+else
+	DTB_LOAD=""
+fi
+
+if [ -z "$*" ]; then
+	DT=arch/arm/dts/${DEVICE_TREE}.dtb
+else
+	DT=$*
+fi
+
+if [ ! -f $BL31 ]; then
+	echo "WARNING: BL31 file $BL31 NOT found, U-Boot will run in EL3" >&2
+	BL31=/dev/null
+fi
+
+cat << __HEADER_EOF
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+/dts-v1/;
+
+/ {
+	description = "Configuration to load ATF before U-Boot";
+
+	images {
+		uboot {
+			description = "U-Boot (64-bit)";
+			data = /incbin/("$BL33");
+			type = "firmware";
+			os = "u-boot";
+			arch = "arm64";
+			compression = "none";
+			load = <$BL33_LOAD_ADDR>;
+			entry = <$BL33_LOAD_ADDR>;
+			hash {
+				algo = "md5";
+			};
+		};
+__HEADER_EOF
+
+if [ -f $BL31 ]; then
+cat << __ATF
+		atf {
+			description = "ARM Trusted Firmware";
+			data = /incbin/("$BL31");
+			type = "firmware";
+			os = "arm-trusted-firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <$ATF_LOAD_ADDR>;
+			entry = <$ATF_LOAD_ADDR>;
+			hash {
+				algo = "md5";
+			};
+		};
+__ATF
+fi
+
+DEFAULT=1
+cnt=1
+for dtname in $DT
+do
+	cat << __FDT_IMAGE_EOF
+		fdt_$cnt {
+			description = "$(basename $dtname .dtb)";
+			data = /incbin/("$dtname");
+			type = "flat_dt";
+			arch = "arm64";
+			compression = "none";
+			$DTB_LOAD
+			hash {
+				algo = "md5";
+			};
+		};
+__FDT_IMAGE_EOF
+
+[ "x$(basename $dtname .dtb)" = "x${DEVICE_TREE}" ] && DEFAULT=$cnt
+
+cnt=$((cnt+1))
+done
+
+cat << __CONF_HEADER_EOF
+	};
+	configurations {
+		default = "config_$DEFAULT";
+
+__CONF_HEADER_EOF
+
+cnt=1
+for dtname in $DT
+do
+if [ ! -f $BL31 ]; then
+cat << __CONF_SECTION1_EOF
+		config_$cnt {
+			description = "$(basename $dtname .dtb)";
+			firmware = "uboot";
+			fdt = "fdt_$cnt";
+		};
+__CONF_SECTION1_EOF
+else
+cat << __CONF_SECTION1_EOF
+		config_$cnt {
+			description = "$(basename $dtname .dtb)";
+			firmware = "atf";
+			loadables = "uboot";
+			fdt = "fdt_$cnt";
+		};
+__CONF_SECTION1_EOF
+fi
+
+cnt=$((cnt+1))
+done
+
+cat << __ITS_EOF
+	};
+};
+__ITS_EOF
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/mp.c b/roms/u-boot/arch/arm/mach-zynqmp/mp.c
new file mode 100644
index 000000000..656678a15
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/mp.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#define LOCK		0
+#define SPLIT		1
+
+#define HALT		0
+#define RELEASE		1
+
+#define ZYNQMP_BOOTADDR_HIGH_MASK		0xFFFFFFFF
+#define ZYNQMP_R5_HIVEC_ADDR			0xFFFF0000
+#define ZYNQMP_R5_LOVEC_ADDR			0x0
+#define ZYNQMP_RPU_CFG_CPU_HALT_MASK		0x01
+#define ZYNQMP_RPU_CFG_HIVEC_MASK		0x04
+#define ZYNQMP_RPU_GLBL_CTRL_SPLIT_LOCK_MASK	0x08
+#define ZYNQMP_RPU_GLBL_CTRL_TCM_COMB_MASK	0x40
+#define ZYNQMP_RPU_GLBL_CTRL_SLCLAMP_MASK	0x10
+
+#define ZYNQMP_CRLAPB_RST_LPD_AMBA_RST_MASK	0x04
+#define ZYNQMP_CRLAPB_RST_LPD_R50_RST_MASK	0x01
+#define ZYNQMP_CRLAPB_RST_LPD_R51_RST_MASK	0x02
+#define ZYNQMP_CRLAPB_CPU_R5_CTRL_CLKACT_MASK	0x1000000
+
+#define ZYNQMP_TCM_START_ADDRESS		0xFFE00000
+#define ZYNQMP_TCM_BOTH_SIZE			0x40000
+
+#define ZYNQMP_CORE_APU0	0
+#define ZYNQMP_CORE_APU3	3
+
+#define ZYNQMP_MAX_CORES	6
+
+int is_core_valid(unsigned int core)
+{
+	if (core < ZYNQMP_MAX_CORES)
+		return 1;
+
+	return 0;
+}
+
+int cpu_reset(u32 nr)
+{
+	puts("Feature is not implemented.\n");
+	return 0;
+}
+
+static void set_r5_halt_mode(u8 halt, u8 mode)
+{
+	u32 tmp;
+
+	tmp = readl(&rpu_base->rpu0_cfg);
+	if (halt == HALT)
+		tmp &= ~ZYNQMP_RPU_CFG_CPU_HALT_MASK;
+	else
+		tmp |= ZYNQMP_RPU_CFG_CPU_HALT_MASK;
+	writel(tmp, &rpu_base->rpu0_cfg);
+
+	if (mode == LOCK) {
+		tmp = readl(&rpu_base->rpu1_cfg);
+		if (halt == HALT)
+			tmp &= ~ZYNQMP_RPU_CFG_CPU_HALT_MASK;
+		else
+			tmp |= ZYNQMP_RPU_CFG_CPU_HALT_MASK;
+		writel(tmp, &rpu_base->rpu1_cfg);
+	}
+}
+
+static void set_r5_tcm_mode(u8 mode)
+{
+	u32 tmp;
+
+	tmp = readl(&rpu_base->rpu_glbl_ctrl);
+	if (mode == LOCK) {
+		tmp &= ~ZYNQMP_RPU_GLBL_CTRL_SPLIT_LOCK_MASK;
+		tmp |= ZYNQMP_RPU_GLBL_CTRL_TCM_COMB_MASK |
+		       ZYNQMP_RPU_GLBL_CTRL_SLCLAMP_MASK;
+	} else {
+		tmp |= ZYNQMP_RPU_GLBL_CTRL_SPLIT_LOCK_MASK;
+		tmp &= ~(ZYNQMP_RPU_GLBL_CTRL_TCM_COMB_MASK |
+		       ZYNQMP_RPU_GLBL_CTRL_SLCLAMP_MASK);
+	}
+
+	writel(tmp, &rpu_base->rpu_glbl_ctrl);
+}
+
+static void set_r5_reset(u8 mode)
+{
+	u32 tmp;
+
+	tmp = readl(&crlapb_base->rst_lpd_top);
+	tmp |= (ZYNQMP_CRLAPB_RST_LPD_AMBA_RST_MASK |
+	       ZYNQMP_CRLAPB_RST_LPD_R50_RST_MASK);
+
+	if (mode == LOCK)
+		tmp |= ZYNQMP_CRLAPB_RST_LPD_R51_RST_MASK;
+
+	writel(tmp, &crlapb_base->rst_lpd_top);
+}
+
+static void release_r5_reset(u8 mode)
+{
+	u32 tmp;
+
+	tmp = readl(&crlapb_base->rst_lpd_top);
+	tmp &= ~(ZYNQMP_CRLAPB_RST_LPD_AMBA_RST_MASK |
+	       ZYNQMP_CRLAPB_RST_LPD_R50_RST_MASK);
+
+	if (mode == LOCK)
+		tmp &= ~ZYNQMP_CRLAPB_RST_LPD_R51_RST_MASK;
+
+	writel(tmp, &crlapb_base->rst_lpd_top);
+}
+
+static void enable_clock_r5(void)
+{
+	u32 tmp;
+
+	tmp = readl(&crlapb_base->cpu_r5_ctrl);
+	tmp |= ZYNQMP_CRLAPB_CPU_R5_CTRL_CLKACT_MASK;
+	writel(tmp, &crlapb_base->cpu_r5_ctrl);
+
+	/* Give some delay for clock
+	 * to propagate */
+	udelay(0x500);
+}
+
+int cpu_disable(u32 nr)
+{
+	if (nr >= ZYNQMP_CORE_APU0 && nr <= ZYNQMP_CORE_APU3) {
+		u32 val = readl(&crfapb_base->rst_fpd_apu);
+		val |= 1 << nr;
+		writel(val, &crfapb_base->rst_fpd_apu);
+	} else {
+		set_r5_reset(LOCK);
+	}
+
+	return 0;
+}
+
+int cpu_status(u32 nr)
+{
+	if (nr >= ZYNQMP_CORE_APU0 && nr <= ZYNQMP_CORE_APU3) {
+		u32 addr_low = readl(((u8 *)&apu_base->rvbar_addr0_l) + nr * 8);
+		u32 addr_high = readl(((u8 *)&apu_base->rvbar_addr0_h) +
+				      nr * 8);
+		u32 val = readl(&crfapb_base->rst_fpd_apu);
+		val &= 1 << nr;
+		printf("APU CPU%d %s - starting address HI: %x, LOW: %x\n",
+		       nr, val ? "OFF" : "ON" , addr_high, addr_low);
+	} else {
+		u32 val = readl(&crlapb_base->rst_lpd_top);
+		val &= 1 << (nr - 4);
+		printf("RPU CPU%d %s\n", nr - 4, val ? "OFF" : "ON");
+	}
+
+	return 0;
+}
+
+static void set_r5_start(u8 high)
+{
+	u32 tmp;
+
+	tmp = readl(&rpu_base->rpu0_cfg);
+	if (high)
+		tmp |= ZYNQMP_RPU_CFG_HIVEC_MASK;
+	else
+		tmp &= ~ZYNQMP_RPU_CFG_HIVEC_MASK;
+	writel(tmp, &rpu_base->rpu0_cfg);
+
+	tmp = readl(&rpu_base->rpu1_cfg);
+	if (high)
+		tmp |= ZYNQMP_RPU_CFG_HIVEC_MASK;
+	else
+		tmp &= ~ZYNQMP_RPU_CFG_HIVEC_MASK;
+	writel(tmp, &rpu_base->rpu1_cfg);
+}
+
+static void write_tcm_boot_trampoline(u32 boot_addr)
+{
+	if (boot_addr) {
+		/*
+		 * Boot trampoline is simple ASM code below.
+		 *
+		 *		b over;
+		 *	label:
+		 *	.word	0
+		 *	over:	ldr	r0, =label
+		 *		ldr	r1, [r0]
+		 *		bx	r1
+		 */
+		debug("Write boot trampoline for %x\n", boot_addr);
+		writel(0xea000000, ZYNQMP_TCM_START_ADDRESS);
+		writel(boot_addr, ZYNQMP_TCM_START_ADDRESS + 0x4);
+		writel(0xe59f0004, ZYNQMP_TCM_START_ADDRESS + 0x8);
+		writel(0xe5901000, ZYNQMP_TCM_START_ADDRESS + 0xc);
+		writel(0xe12fff11, ZYNQMP_TCM_START_ADDRESS + 0x10);
+		writel(0x00000004, ZYNQMP_TCM_START_ADDRESS + 0x14); // address for
+	}
+}
+
+void initialize_tcm(bool mode)
+{
+	if (!mode) {
+		set_r5_tcm_mode(LOCK);
+		set_r5_halt_mode(HALT, LOCK);
+		enable_clock_r5();
+		release_r5_reset(LOCK);
+	} else {
+		set_r5_tcm_mode(SPLIT);
+		set_r5_halt_mode(HALT, SPLIT);
+		enable_clock_r5();
+		release_r5_reset(SPLIT);
+	}
+}
+
+int cpu_release(u32 nr, int argc, char *const argv[])
+{
+	if (nr >= ZYNQMP_CORE_APU0 && nr <= ZYNQMP_CORE_APU3) {
+		u64 boot_addr = simple_strtoull(argv[0], NULL, 16);
+		/* HIGH */
+		writel((u32)(boot_addr >> 32),
+		       ((u8 *)&apu_base->rvbar_addr0_h) + nr * 8);
+		/* LOW */
+		writel((u32)(boot_addr & ZYNQMP_BOOTADDR_HIGH_MASK),
+		       ((u8 *)&apu_base->rvbar_addr0_l) + nr * 8);
+
+		u32 val = readl(&crfapb_base->rst_fpd_apu);
+		val &= ~(1 << nr);
+		writel(val, &crfapb_base->rst_fpd_apu);
+	} else {
+		if (argc != 2) {
+			printf("Invalid number of arguments to release.\n");
+			printf("<addr> <mode>-Start addr lockstep or split\n");
+			return 1;
+		}
+
+		u32 boot_addr = simple_strtoul(argv[0], NULL, 16);
+		u32 boot_addr_uniq = 0;
+		if (!(boot_addr == ZYNQMP_R5_LOVEC_ADDR ||
+		      boot_addr == ZYNQMP_R5_HIVEC_ADDR)) {
+			printf("Using TCM jump trampoline for address 0x%x\n",
+			       boot_addr);
+			/* Save boot address for later usage */
+			boot_addr_uniq = boot_addr;
+			/*
+			 * R5 needs to start from LOVEC at TCM
+			 * OCM will be probably occupied by ATF
+			 */
+			boot_addr = ZYNQMP_R5_LOVEC_ADDR;
+		}
+
+		/*
+		 * Since we don't know where the user may have loaded the image
+		 * for an R5 we have to flush all the data cache to ensure
+		 * the R5 sees it.
+		 */
+		flush_dcache_all();
+
+		if (!strncmp(argv[1], "lockstep", 8)) {
+			printf("R5 lockstep mode\n");
+			set_r5_reset(LOCK);
+			set_r5_tcm_mode(LOCK);
+			set_r5_halt_mode(HALT, LOCK);
+			set_r5_start(boot_addr);
+			enable_clock_r5();
+			release_r5_reset(LOCK);
+			dcache_disable();
+			write_tcm_boot_trampoline(boot_addr_uniq);
+			dcache_enable();
+			set_r5_halt_mode(RELEASE, LOCK);
+		} else if (!strncmp(argv[1], "split", 5)) {
+			printf("R5 split mode\n");
+			set_r5_reset(SPLIT);
+			set_r5_tcm_mode(SPLIT);
+			set_r5_halt_mode(HALT, SPLIT);
+			set_r5_start(boot_addr);
+			enable_clock_r5();
+			release_r5_reset(SPLIT);
+			dcache_disable();
+			write_tcm_boot_trampoline(boot_addr_uniq);
+			dcache_enable();
+			set_r5_halt_mode(RELEASE, SPLIT);
+		} else {
+			printf("Unsupported mode\n");
+			return 1;
+		}
+	}
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/psu_spl_init.c b/roms/u-boot/arch/arm/mach-zynqmp/psu_spl_init.c
new file mode 100644
index 000000000..5c5c7d136
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/psu_spl_init.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/psu_init_gpl.h>
+#include <linux/delay.h>
+
+#define PSU_MASK_POLL_TIME 1100000
+
+int __maybe_unused mask_pollonvalue(unsigned long add, u32 mask, u32 value)
+{
+	int i = 0;
+
+	while ((__raw_readl(add) & mask) != value) {
+		if (i == PSU_MASK_POLL_TIME)
+			return 0;
+		i++;
+	}
+	return 1;
+}
+
+__weak int mask_poll(u32 add, u32 mask)
+{
+	int i = 0;
+	unsigned long addr = add;
+
+	while (!(__raw_readl(addr) & mask)) {
+		if (i == PSU_MASK_POLL_TIME)
+			return 0;
+		i++;
+	}
+	return 1;
+}
+
+__weak u32 mask_read(u32 add, u32 mask)
+{
+	unsigned long addr = add;
+
+	return __raw_readl(addr) & mask;
+}
+
+__weak void mask_delay(u32 delay)
+{
+	udelay(delay);
+}
+
+__weak void psu_mask_write(unsigned long offset, unsigned long mask,
+			   unsigned long val)
+{
+	unsigned long regval = 0;
+
+	regval = readl(offset);
+	regval &= ~(mask);
+	regval |= (val & mask);
+	writel(regval, offset);
+}
+
+__weak void prog_reg(unsigned long addr, unsigned long mask,
+		     unsigned long shift, unsigned long value)
+{
+	int rdata = 0;
+
+	rdata = readl(addr);
+	rdata = rdata & (~mask);
+	rdata = rdata | (value << shift);
+	writel(rdata, addr);
+}
+
+__weak int psu_init(void)
+{
+	/*
+	 * This function is overridden by the one in
+	 * board/xilinx/zynqmp/(platform)/psu_init_gpl.c, if it exists.
+	 */
+	return -1;
+}
+
+__weak unsigned long psu_post_config_data(void)
+{
+	/*
+	 * This function is overridden by the one in
+	 * board/xilinx/zynqmp/(platform)/psu_init_gpl.c, if it exists.
+	 */
+	return 0;
+}
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/spl.c b/roms/u-boot/arch/arm/mach-zynqmp/spl.c
new file mode 100644
index 000000000..88386b23e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/spl.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 - 2016 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <common.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/spl.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/psu_init_gpl.h>
+#include <asm/arch/sys_proto.h>
+
+void board_init_f(ulong dummy)
+{
+	board_early_init_f();
+	board_early_init_r();
+}
+
+static void ps_mode_reset(ulong mode)
+{
+	writel(mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT,
+	       &crlapb_base->boot_pin_ctrl);
+	udelay(5);
+	writel(mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_VAL_SHIFT |
+	       mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT,
+	       &crlapb_base->boot_pin_ctrl);
+}
+
+/*
+ * Set default PS_MODE1 which is used for USB ULPI phy reset
+ * Also other resets can be connected to this certain pin
+ */
+#ifndef MODE_RESET
+# define MODE_RESET	PS_MODE1
+#endif
+
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void)
+{
+	preloader_console_init();
+	ps_mode_reset(MODE_RESET);
+	board_init();
+	psu_post_config_data();
+}
+#endif
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+
+	if (spl_boot_list[0] == BOOT_DEVICE_MMC1)
+		spl_boot_list[1] = BOOT_DEVICE_MMC2;
+	if (spl_boot_list[0] == BOOT_DEVICE_MMC2)
+		spl_boot_list[1] = BOOT_DEVICE_MMC1;
+
+	spl_boot_list[2] = BOOT_DEVICE_RAM;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 reg = 0;
+	u8 bootmode;
+
+#if defined(CONFIG_SPL_ZYNQMP_ALT_BOOTMODE_ENABLED)
+	/* Change default boot mode at run-time */
+	writel(CONFIG_SPL_ZYNQMP_ALT_BOOTMODE << BOOT_MODE_ALT_SHIFT,
+	       &crlapb_base->boot_mode);
+#endif
+
+	reg = readl(&crlapb_base->boot_mode);
+	if (reg >> BOOT_MODE_ALT_SHIFT)
+		reg >>= BOOT_MODE_ALT_SHIFT;
+
+	bootmode = reg & BOOT_MODES_MASK;
+
+	switch (bootmode) {
+	case JTAG_MODE:
+		return BOOT_DEVICE_RAM;
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case SD_MODE1:
+	case SD1_LSHFT_MODE: /* not working on silicon v1 */
+		return BOOT_DEVICE_MMC2;
+	case SD_MODE:
+	case EMMC_MODE:
+		return BOOT_DEVICE_MMC1;
+#endif
+#ifdef CONFIG_SPL_DFU
+	case USB_MODE:
+		return BOOT_DEVICE_DFU;
+#endif
+#ifdef CONFIG_SPL_SATA_SUPPORT
+	case SW_SATA_MODE:
+		return BOOT_DEVICE_SATA;
+#endif
+#ifdef CONFIG_SPL_SPI_SUPPORT
+	case QSPI_MODE_24BIT:
+	case QSPI_MODE_32BIT:
+		return BOOT_DEVICE_SPI;
+#endif
+	default:
+		printf("Invalid Boot Mode:0x%x\n", bootmode);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/arch/arm/thumb1/include/asm/proc-armv/system.h b/roms/u-boot/arch/arm/thumb1/include/asm/proc-armv/system.h
new file mode 100644
index 000000000..1324f7efb
--- /dev/null
+++ b/roms/u-boot/arch/arm/thumb1/include/asm/proc-armv/system.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Thumb-1 drop-in for the linux/include/asm-arm/proc-armv/system.h
+ *
+ *  (C) Copyright 2015
+ *  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * The original file does not build in Thumb mode. However, in U-Boot
+ * we don't use interrupt context, so we can redefine these as empty
+ * memory barriers, which makes Thumb-1 compiler happy.
+ */
+
+/*
+ * Use the same macro name as linux/include/asm-arm/proc-armv/system.h
+ * here, so that if the original ever gets included after us, it won't
+ * try to re-redefine anything.
+ */
+
+#ifndef __ASM_PROC_SYSTEM_H
+#define __ASM_PROC_SYSTEM_H
+
+/*
+ * Redefine all original macros with static inline functions containing
+ * a simple memory barrier, so that they produce the same instruction
+ * ordering constraints as their original counterparts.
+ * We use static inline functions rather than macros so that we can tell
+ * the compiler to not complain about unused arguments.
+ */
+
+static inline void local_irq_save(
+	unsigned long flags __attribute__((unused)))
+{
+	__asm__ __volatile__ ("" : : : "memory");
+}
+
+static inline void local_irq_enable(void)
+{
+	__asm__ __volatile__ ("" : : : "memory");
+}
+
+static inline void local_irq_disable(void)
+{
+	__asm__ __volatile__ ("" : : : "memory");
+}
+
+static inline void __stf(void)
+{
+	__asm__ __volatile__ ("" : : : "memory");
+}
+
+static inline void __clf(void)
+{
+	__asm__ __volatile__ ("" : : : "memory");
+}
+
+static inline void local_save_flags(
+	unsigned long flags __attribute__((unused)))
+{
+	__asm__ __volatile__ ("" : : : "memory");
+}
+
+static inline void local_irq_restore(
+	unsigned long flags __attribute__((unused)))
+{
+	__asm__ __volatile__ ("" : : : "memory");
+}
+
+#endif /*  __ASM_PROC_SYSTEM_H */